diff options
Diffstat (limited to 'gcc/ada/einfo.ads')
| -rw-r--r-- | gcc/ada/einfo.ads | 146 |
1 files changed, 90 insertions, 56 deletions
diff --git a/gcc/ada/einfo.ads b/gcc/ada/einfo.ads index 804900b..f9dda49 100644 --- a/gcc/ada/einfo.ads +++ b/gcc/ada/einfo.ads @@ -6,9 +6,9 @@ -- -- -- S p e c -- -- -- --- $Revision: 1.6 $ +-- $Revision: 1.654 $ -- -- --- Copyright (C) 1992-2001 Free Software Foundation, Inc. -- +-- Copyright (C) 1992-2002 Free Software Foundation, Inc. -- -- -- -- GNAT is free software; you can redistribute it and/or modify it under -- -- terms of the GNU General Public License as published by the Free Soft- -- @@ -33,6 +33,7 @@ -- -- ------------------------------------------------------------------------------ +with Snames; use Snames; with Types; use Types; with Uintp; use Uintp; with Urealp; use Urealp; @@ -270,17 +271,18 @@ package Einfo is -- are so noted by the notation [base type only]. These are cases where the -- attribute of any subtype is the same as the attribute of the base type. -- The attribute can be referenced on a subtype (and automatically retrieves --- the value from the base type), and if an attempt is made to set them on --- other than a subtype, they will instead be set on the corresponding base --- type. +-- the value from the base type). However, it is an error to try to set the +-- attribute on other than the base type, and if assertions are enabled, +-- an attempt to set the attribute on a subtype will raise an assert error. -- Other attributes are noted as applying the implementation base type only. -- These are representation attributes which must always apply to a full -- non-private type, and where the attributes are always on the full type. -- The attribute can be referenced on a subtype (and automatically retries --- the value from the implementation base type), and if an attempt is made --- to set them on other than a subtype, they will instead be set on the --- corresponding implementation base type. +-- the value from the implementation base type). However, it is an error +-- to try to set the attribute on other than the implementation base type, +-- and if assertions are enabled, an attempt to set the attribute on a +-- subtype will raise an assert error. -- Accept_Address (Elist21) -- Present in entries. If an accept has a statement sequence, then an @@ -309,7 +311,7 @@ package Einfo is -- rather irregular, and the semantic checks that depend on the nominal -- subtype being unconstrained use flag Is_Constr_Subt_For_U_Nominal(qv). --- Access_Disp_Table (Node16) [base type only] +-- Access_Disp_Table (Node16) [implementation base type only] -- Present in record type entities. For a tagged type, points to the -- dispatch table associated with the tagged type. For a non-tagged -- record, contains Empty. @@ -367,10 +369,12 @@ package Einfo is -- the node whose elaboration generated the Itype. This is used for -- copying trees, to determine whether or not to copy an Itype. --- Associated_Storage_Pool (Node22) +-- Associated_Storage_Pool (Node22) [root type only] -- Present in simple and general access type entities. References the -- storage pool to be used for the corresponding collection. A value of --- Empty means that the default pool is to be used. +-- Empty means that the default pool is to be used. This is present +-- only in the root type, since derived types must have the same pool +-- as the parent type. -- Associated_Final_Chain (Node23) -- Present in simple and general access type entities. References the @@ -400,7 +404,7 @@ package Einfo is -- for finalization purposes, The block entity has an implicit label -- declaration in the enclosing declarative part, and has otherwise -- no direct connection in the tree with the block statement. The --- link is to the identifier (which is an occurrence of the entity) +-- link is to the identifier (which is an occurence of the entity) -- and not to the block_statement itself, because the statement may -- be rewritten, e.g. in the process of removing dead code. @@ -511,9 +515,7 @@ package Einfo is -- for details of these values. -- Component_Type (Node20) [implementation base type only] --- Present in array types and subtypes, and also in the special --- enumeration table type created for enumeration type. References --- the entity for the component type. +-- Present in array types and string types. References component type. -- Constant_Value (synthesized) -- Applies to constants, named integers, and named reals. Obtains @@ -1360,9 +1362,15 @@ package Einfo is -- Pure_Function was given for the entity. In some cases, we need to -- know that Is_Pure was explicitly set using this pragma. +-- Has_Pragma_Unreferenced (Flag180) +-- Present in all entities. Set if a valid pragma Unreferenced applies +-- to the pragma, indicating that no warning should be given if the +-- entity has no references, but a warning should be given if it is +-- in fact referenced. + -- Has_Primitive_Operations (Flag120) [base type only] -- Present in all type entities. Set if at least one primitive operation --- is defined on the type. This flag is not yet properly set ??? +-- is defined for the type. -- Has_Private_Ancestor (synthesized) -- Applies to all type and subtype entities. Returns True if at least @@ -1386,7 +1394,7 @@ package Einfo is -- the flag Has_Fully_Qualified_Name, which is set if the name does -- indeed include the fully qualified name. --- Has_Record_Rep_Clause (Flag65) +-- Has_Record_Rep_Clause (Flag65) [implementation base type only] -- Present in record types. Set if a record representation clause has -- been given for this record type. Used to prevent more than one such -- clause for a given record type. Note that this is initially cleared @@ -1412,7 +1420,7 @@ package Einfo is -- initially cleared for a derived type, even though the Small for such -- a type is inherited from a Small clause given for the parent type. --- Has_Specified_Layout (Flag100) +-- Has_Specified_Layout (Flag100) [implementation base type only] -- Present in all type entities. Set for a record type or subtype if -- the record layout has been specified by a record representation -- clause. Note that this differs from the flag Has_Record_Rep_Clause @@ -1575,7 +1583,7 @@ package Einfo is -- Present in all type entities and in procedure entities. Set -- if a pragma Asynchronous applies to the entity. --- Is_Bit_Packed_Array (Flag122) +-- Is_Bit_Packed_Array (Flag122) [implementation base type only] -- Present in all entities. This flag is set for a packed array -- type that is bit packed (i.e. the component size is known by the -- front end and is in the range 1-7, 9-15, or 17-31). Is_Packed is @@ -1718,7 +1726,8 @@ package Einfo is -- Is_Eliminated (Flag124) -- Present in type entities, subprogram entities, and object entities. -- Indicates that the corresponding entity has been eliminated by use --- of pragma Eliminate. +-- of pragma Eliminate. Also used to mark subprogram entities whose +-- declaration and body are within unreachable code that is removed. -- Is_Enumeration_Type (synthesized) -- Present in all entities, true for enumeration types and subtypes @@ -2012,7 +2021,9 @@ package Einfo is -- if the type appears in the Packed_Array_Type field of some other type -- entity. It is used by Gigi to activate the special processing for such -- types (unchecked conversions that would not otherwise be allowed are --- allowed for such types). +-- allowed for such types). If the Is_Packed_Array_Type flag is set in +-- an entity, then the Original_Array_Type field of this entity points +-- to the original array type for which this is the packed array type. -- Is_Potentially_Use_Visible (Flag9) -- Present in all entities. Set if entity is potentially use visible, @@ -2251,7 +2262,9 @@ package Einfo is -- Mechanism (Uint8) (returned as Mechanism_Type) -- Present in functions and non-generic formal parameters. Indicates -- the mechanism to be used for the function return or for the formal --- parameter. See separate section on passing mechanisms. +-- parameter. See separate section on passing mechanisms. This field +-- is also set (to the default value of zero) in a subprogram body +-- entity but not used in this context. -- Modulus (Uint17) [base type only] -- Present in modular types. Contains the modulus. For the binary @@ -2382,7 +2395,8 @@ package Einfo is -- Present in access types. Set if a storage size clause applies to -- the variable with a compile time known value of zero. This flag is -- used to generate warnings if any attempt is made to allocate an --- instance of such an access type. +-- instance of such an access type. This is set only in the root +-- type, since derived types must have the same pool. -- No_Return (Flag113) -- Present in procedure and generic procedure entries. Indicates that @@ -2426,6 +2440,13 @@ package Einfo is -- Applies to subprograms and subprogram types. Yields the number of -- formals as a value of type Pos. +-- Original_Array_Type (Node21) +-- Present in modular types and array types and subtypes. Set only +-- if the Is_Packed_Array_Type flag is set, indicating that the type +-- is the implementation type for a packed array, and in this case it +-- points to the original array type for which this is the packed +-- array implementation type. + -- Object_Ref (Node17) -- Present in protected bodies. This is an implicit prival for the -- Protection object associated with a protected object. See Prival @@ -2466,7 +2487,7 @@ package Einfo is -- Parameter_Mode (synthesized) -- Applies to formal parameter entities. This is a synonym for Ekind, -- used when obtaining the formal kind of a formal parameter (the result --- is one of E_[In/Out/In_Out]_Parameter) +-- is one of E_[In/Out/In_Out]_Paramter) -- Parent_Subtype (Node19) -- Present in E_Record_Type. Points to the subtype to use for a @@ -2616,7 +2637,7 @@ package Einfo is -- returns the result by reference, either because its return typ is a -- by-reference-type or because it uses explicitly the secondary stack. --- Reverse_Bit_Order (Flag164) +-- Reverse_Bit_Order (Flag164) [base type only] -- Present in all record type entities. Set if a valid pragma an -- attribute represention clause for Bit_Order has reversed the order -- of bits from the default value. When this flag is set, a component @@ -3668,10 +3689,11 @@ package Einfo is -- Has_Homonym (Flag56) -- Has_Pragma_Elaborate_Body (Flag150) -- Has_Pragma_Inline (Flag157) + -- Has_Pragma_Unreferenced (Flag180) -- Has_Private_Declaration (Flag155) -- Has_Qualified_Name (Flag161) -- Has_Unknown_Discriminants (Flag72) - -- Is_Bit_Packed_Array (Flag122) + -- Is_Bit_Packed_Array (Flag122) (base type only) -- Is_Child_Unit (Flag73) -- Is_Compilation_Unit (Flag149) -- Is_Completely_Hidden (Flag103) @@ -3745,12 +3767,12 @@ package Einfo is -- Discard_Names (Flag88) -- Finalize_Storage_Only (Flag158) (base type only) -- From_With_Type (Flag159) - -- Has_Aliased_Components (Flag135) + -- Has_Aliased_Components (Flag135) (base type only) -- Has_Alignment_Clause (Flag46) -- Has_Atomic_Components (Flag86) (base type only) -- Has_Complex_Representation (Flag140) (base type only) -- Has_Discriminants (Flag5) - -- Has_Non_Standard_Rep (Flag75) + -- Has_Non_Standard_Rep (Flag75) (base type only) -- Has_Object_Size_Clause (Flag172) -- Has_Primitive_Operations (Flag120) (base type only) -- Has_Size_Clause (Flag29) @@ -3778,7 +3800,7 @@ package Einfo is -- Is_Volatile (Flag16) -- Size_Depends_On_Discriminant (Flag177) -- Size_Known_At_Compile_Time (Flag92) - -- Strict_Alignment (Flag145) + -- Strict_Alignment (Flag145) (base type only) -- Suppress_Init_Proc (Flag105) (base type only) -- Alignment_Clause (synth) @@ -3811,15 +3833,15 @@ package Einfo is -- E_Access_Type -- E_Access_Subtype - -- Storage_Size_Variable (Node15) (root type only) + -- Storage_Size_Variable (Node15) (base type only) -- Master_Id (Node17) -- Directly_Designated_Type (Node20) - -- Associated_Storage_Pool (Node22) + -- Associated_Storage_Pool (Node22) (base type only) -- Associated_Final_Chain (Node23) -- Has_Pragma_Controlled (Flag27) (base type only) - -- Has_Storage_Size_Clause (Flag23) (root type only) + -- Has_Storage_Size_Clause (Flag23) (base type only) -- Is_Access_Constant (Flag69) - -- No_Pool_Assigned (Flag131) (root type only) + -- No_Pool_Assigned (Flag131) (base type only) -- (plus type attributes) -- E_Access_Attribute_Type @@ -3840,6 +3862,7 @@ package Einfo is -- First_Index (Node17) -- Related_Array_Object (Node19) -- Component_Type (Node20) (base type only) + -- Original_Array_Type (Node21) -- Component_Size (Uint22) (base type only) -- Packed_Array_Type (Node23) -- Component_Alignment (special) (base type only) @@ -4089,7 +4112,7 @@ package Einfo is -- Storage_Size_Variable (Node15) (base type only) -- Master_Id (Node17) -- Directly_Designated_Type (Node20) - -- Associated_Storage_Pool (Node22) + -- Associated_Storage_Pool (Node22) (base type only) -- Associated_Final_Chain (Node23) -- (plus type attributes) @@ -4163,6 +4186,7 @@ package Einfo is -- E_Modular_Integer_Type -- E_Modular_Integer_Subtype -- Modulus (Uint17) (base type only) + -- Original_Array_Type (Node21) -- Scalar_Range (Node20) -- Non_Binary_Modulus (Flag58) (base type only) -- Has_Biased_Representation (Flag139) @@ -4352,13 +4376,13 @@ package Einfo is -- Parent_Subtype (Node19) -- Last_Entity (Node20) -- Discriminant_Constraint (Elist21) - -- Corresponding_Remote_Type (Node22) (base type only) + -- Corresponding_Remote_Type (Node22) -- Girder_Constraint (Elist23) -- Component_Alignment (special) (base type only) -- C_Pass_By_Copy (Flag125) (base type only) -- Has_Controlled_Component (Flag43) (base type only) -- Has_External_Tag_Rep_Clause (Flag110) - -- Has_Record_Rep_Clause (Flag65) + -- Has_Record_Rep_Clause (Flag65) (base type only) -- Is_Concurrent_Record_Type (Flag20) -- Is_Constrained (Flag12) -- Is_Controlled (Flag42) (base type only) @@ -4383,7 +4407,7 @@ package Einfo is -- Has_Completion (Flag26) -- Has_Completion_In_Body (Flag71) -- Has_Controlled_Component (Flag43) (base type only) - -- Has_Record_Rep_Clause (Flag65) + -- Has_Record_Rep_Clause (Flag65) (base type only) -- Has_External_Tag_Rep_Clause (Flag110) -- Is_Concurrent_Record_Type (Flag20) -- Is_Constrained (Flag12) @@ -4416,11 +4440,11 @@ package Einfo is -- String_Literal_Low_Bound (Node15) -- String_Literal_Length (Uint16) -- First_Index (Node17) (always Empty) - -- Component_Type (Node20) (base type only) -- Packed_Array_Type (Node23) -- (plus type attributes) -- E_Subprogram_Body + -- Mechanism (Uint8) -- First_Entity (Node17) -- Last_Entity (Node20) -- Scope_Depth_Value (Uint22) @@ -4845,6 +4869,7 @@ package Einfo is function Has_Pragma_Inline (Id : E) return B; function Has_Pragma_Pack (Id : E) return B; function Has_Pragma_Pure_Function (Id : E) return B; + function Has_Pragma_Unreferenced (Id : E) return B; function Has_Primitive_Operations (Id : E) return B; function Has_Qualified_Name (Id : E) return B; function Has_Record_Rep_Clause (Id : E) return B; @@ -4955,6 +4980,7 @@ package Einfo is function Normalized_Position_Max (Id : E) return U; function Not_Source_Assigned (Id : E) return B; function Object_Ref (Id : E) return E; + function Original_Array_Type (Id : E) return E; function Original_Record_Component (Id : E) return E; function Packed_Array_Type (Id : E) return E; function Parent_Subtype (Id : E) return E; @@ -5137,15 +5163,15 @@ package Einfo is -- possible, so we do not need a separate Known_Static calls in -- these cases. The not set (unknown values are as follows: - -- Alignment Uint_0 - -- Component_Size Uint_0 + -- Alignment Uint_0 or No_Uint + -- Component_Size Uint_0 or No_Uint -- Component_Bit_Offset No_Uint - -- Digits_Value Uint_0 - -- Esize Uint_0 + -- Digits_Value Uint_0 or No_Uint + -- Esize Uint_0 or No_Uint -- Normalized_First_Bit No_Uint -- Normalized_Position No_Uint -- Normalized_Position_Max No_Uint - -- RM_Size Uint_0 + -- RM_Size Uint_0 or No_Uint -- It would be cleaner to use No_Uint in all these cases, but historically -- we chose to use Uint_0 at first, and the change over will take time ??? @@ -5166,6 +5192,7 @@ package Einfo is function Known_Static_Component_Bit_Offset (E : Entity_Id) return B; function Known_Static_Component_Size (E : Entity_Id) return B; function Known_Static_Esize (E : Entity_Id) return B; + function Known_Static_Normalized_First_Bit (E : Entity_Id) return B; function Known_Static_Normalized_Position (E : Entity_Id) return B; function Known_Static_Normalized_Position_Max (E : Entity_Id) return B; function Known_Static_RM_Size (E : Entity_Id) return B; @@ -5301,6 +5328,7 @@ package Einfo is procedure Set_Has_Pragma_Inline (Id : E; V : B := True); procedure Set_Has_Pragma_Pack (Id : E; V : B := True); procedure Set_Has_Pragma_Pure_Function (Id : E; V : B := True); + procedure Set_Has_Pragma_Unreferenced (Id : E; V : B := True); procedure Set_Has_Primitive_Operations (Id : E; V : B := True); procedure Set_Has_Private_Declaration (Id : E; V : B := True); procedure Set_Has_Qualified_Name (Id : E; V : B := True); @@ -5416,6 +5444,7 @@ package Einfo is procedure Set_Normalized_Position_Max (Id : E; V : U); procedure Set_Not_Source_Assigned (Id : E; V : B := True); procedure Set_Object_Ref (Id : E; V : E); + procedure Set_Original_Array_Type (Id : E; V : E); procedure Set_Original_Record_Component (Id : E; V : E); procedure Set_Packed_Array_Type (Id : E; V : E); procedure Set_Parent_Subtype (Id : E; V : E); @@ -5590,6 +5619,20 @@ package Einfo is procedure Append_Entity (Id : Entity_Id; V : Entity_Id); -- Add an entity to the list of entities declared in the scope V + function Get_Rep_Pragma (E : Entity_Id; Nam : Name_Id) return Node_Id; + -- Searches the Rep_Item chain for the given entity E, for an instance + -- of a representation pragma with the given name Nam. If found then + -- the value returned is the N_Pragma node, otherwise Empty is returned. + + function Get_Attribute_Definition_Clause + (E : Entity_Id; + Id : Attribute_Id) + return Node_Id; + -- Searches the Rep_Item chain for a given entity E, for an instance + -- of an attribute definition clause with the given attibute Id Id. If + -- found, the value returned is the N_Attribute_Definition_Clause node, + -- otherwise Empty is returned. + function Is_Entity_Name (N : Node_Id) return Boolean; -- Test if the node N is the name of an entity (i.e. is an identifier, -- expanded name, or an attribute reference that returns an entity). @@ -5769,6 +5812,7 @@ package Einfo is pragma Inline (Has_Pragma_Inline); pragma Inline (Has_Pragma_Pack); pragma Inline (Has_Pragma_Pure_Function); + pragma Inline (Has_Pragma_Unreferenced); pragma Inline (Has_Primitive_Operations); pragma Inline (Has_Private_Declaration); pragma Inline (Has_Qualified_Name); @@ -5920,6 +5964,7 @@ package Einfo is pragma Inline (Normalized_Position_Max); pragma Inline (Not_Source_Assigned); pragma Inline (Object_Ref); + pragma Inline (Original_Array_Type); pragma Inline (Original_Record_Component); pragma Inline (Packed_Array_Type); pragma Inline (Parameter_Mode); @@ -5988,19 +6033,6 @@ package Einfo is pragma Inline (Init_Esize); pragma Inline (Init_RM_Size); - pragma Inline (Known_Alignment); - pragma Inline (Known_Component_Bit_Offset); - pragma Inline (Known_Component_Size); - pragma Inline (Known_Esize); - - pragma Inline (Known_Static_Component_Size); - pragma Inline (Known_Static_Esize); - - pragma Inline (Unknown_Alignment); - pragma Inline (Unknown_Component_Bit_Offset); - pragma Inline (Unknown_Component_Size); - pragma Inline (Unknown_Esize); - pragma Inline (Set_Accept_Address); pragma Inline (Set_Access_Disp_Table); pragma Inline (Set_Actual_Subtype); @@ -6115,6 +6147,7 @@ package Einfo is pragma Inline (Set_Has_Pragma_Inline); pragma Inline (Set_Has_Pragma_Pack); pragma Inline (Set_Has_Pragma_Pure_Function); + pragma Inline (Set_Has_Pragma_Unreferenced); pragma Inline (Set_Has_Primitive_Operations); pragma Inline (Set_Has_Private_Declaration); pragma Inline (Set_Has_Qualified_Name); @@ -6230,6 +6263,7 @@ package Einfo is pragma Inline (Set_Normalized_Position_Max); pragma Inline (Set_Not_Source_Assigned); pragma Inline (Set_Object_Ref); + pragma Inline (Set_Original_Array_Type); pragma Inline (Set_Original_Record_Component); pragma Inline (Set_Packed_Array_Type); pragma Inline (Set_Parent_Subtype); |