(top level)

	Merged from libada-gnattools-branch:
	2004-11-28  Nathanael Nerode  <neroden@gcc.gnu.org>

	* gnattools: New directory.
	* Makefile.def: Add gnattools as a module, depending on target-libada.
	* Makefile.in: Regenerate.
	* configure.in: Include gnattools in host_tools; disable it if ada
	is disabled.
	* configure: Regenerate.

(gcc)
	* configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
	* configure: Regenerate.
        * libada-mk.in: Remove CC; rename
	cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.

(gcc/ada)
	Partial merge from libada-gnattools-branch:

	2004-12-02  Nathanael Nerode  <neroden@gcc.gnu.org>
        * Makefile.in: Move gnattools{1,1re,2,3,4} and corresponding flags
        into code in gnattools/Makefile.in.  Remove direct dependencies on
        stamp-tools by tools clauses.
	2004-12-02  Nathanael Nerode  <neroden@gcc.gnu.org>
        * config-lang.in: Add gnattools to $lang_dirs.

(libada)
2004-12-03  Nathanael Nerode  <neroden@gcc.gnu.org>

	* Makefile.in: Add stamp file for building libada, to avoid
	duplicate builds every time all-gnattools is called.

2004-12-02  Nathanael Nerode  <neroden@gcc.gnu.org>

	* Makefile.in: Build gcc/ada/Makefile (by running gcc/ada/configure)
	here.

2004-08-16  Nathanael Nerode  <neroden@gcc.gnu.org>

	* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
	_TARGET.
	* configure: Regenerate.

2004-07-18  Nathanael Nerode  <neroden@gcc.gnu.org>

	* configure.ac, Makefile.in: Remove gnattools-specific code
	(see gnattools directory).
	* Makefile.in: Remove dead rts-* targets.
	* configure: Regenerate.

(gnattools)
2005-02-02  Nathanael Nerode  <neroden@gcc.gnu.org>

        * Makefile.in: Remove use of cc_set_by_configure; just use
        plain old CC from the top level in this case.

2005-01-30  Nathanael Nerode  <neroden@gcc.gnu.org>
	Merge from mainline at tag libada-gnattools-merge-20050129:
	* configure.ac: Changes propagated from gcc/ada/Makefile.in.
	* Makefile.in: Changes relocated from gcc/ada/Makefile.in.

2004-12-13  Nathanael Nerode  <neroden@gcc.gnu.org>

        * Makefile.in: Reinstate stamp-gnatlib check.

2004-12-02  Nathanael Nerode  <neroden@gcc.gnu.org>

	* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
	gcc/ada/configure.ac into gnattools-native and gnattools-cross
	targets, collecting flags as appropriate from here,
	gcc/ada/Makefile.in, gcc/ada/configure.ac, etc.  Attempt to retain
	identical behavior.
	* configure.ac: Add necessary configure bits from
	gcc/ada/configure.ac.
	* configure: Regenerate.

2004-08-16  Nathanael Nerode  <neroden@gcc.gnu.org>

	* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
	_TARGET.  Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
	ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
	* configure: Regenerate.

2004-07-18  Nathanael Nerode  <neroden@gcc.gnu.org>

	* Makefile.in, configure.ac: Remove libada-specific targets and
	variables.
	* configure: Regenerate.
	* New directory, cloned from libada.

From-SVN: r95594

4 files changed, 3119 insertions, 0 deletions

diff --git a/gnattools/ChangeLog b/gnattools/ChangeLog
new file mode 100644
index 0000000..e11c177
--- /dev/null
+++ b/gnattools/ChangeLog
@@ -0,0 +1,44 @@
+2005-02-02  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+        * Makefile.in: Remove use of cc_set_by_configure; just use
+        plain old CC from the top level in this case.
+
+2005-01-30  Nathanael Nerode  <neroden@gcc.gnu.org>
+	Merge from mainline at tag libada-gnattools-merge-20050129:
+	* configure.ac: Changes propagated from gcc/ada/Makefile.in.
+	* Makefile.in: Changes relocated from gcc/ada/Makefile.in.
+
+2004-12-13  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+        * Makefile.in: Reinstate stamp-gnatlib check.
+
+2004-12-02  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* Makefile.in: Inline gnattools{1,1-re,2,3,4} targets from
+	gcc/ada/configure.ac into gnattools-native and gnattools-cross
+	targets, collecting flags as appropriate from here,
+	gcc/ada/Makefile.in, gcc/ada/configure.ac, etc.  Attempt to retain
+	identical behavior.
+	* configure.ac: Add necessary configure bits from
+	gcc/ada/configure.ac.
+	* configure: Regenerate.
+
+2004-08-16  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* configure.ac: Replace AC_CANONICAL_SYSTEM with _BUILD, _HOST,
+	_TARGET.  Replace _GCC_TOPLEV_NONCANONICAL_TARGET with
+	ACX_NONCANONICAL_TARGET, and replace now-redundant AC_SUBST.
+	* configure: Regenerate.
+
+2004-07-18  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+	* Makefile.in, configure.ac: Remove libada-specific targets and
+	variables.
+	* configure: Regenerate.
+	* New directory, cloned from libada.
+
+Copyright 2004, 2005 Free Software Foundation, Inc.
+
+This ChangeLog is free software; the Free Software Foundation gives
+unlimited permission to copy, distribute, and modify it.
+
diff --git a/gnattools/Makefile.in b/gnattools/Makefile.in
new file mode 100644
index 0000000..44208f6
--- /dev/null
+++ b/gnattools/Makefile.in
@@ -0,0 +1,338 @@
+# Makefile for gnattools
+#   Copyright 2003, 2004 Free Software Foundation, Inc.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+# Default target; must be first.
+all: gnattools
+
+# Standard autoconf-set variables.
+SHELL = @SHELL@
+srcdir = @srcdir@
+build = @build@
+target = @target@
+prefix = @prefix@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+
+# Nonstandard autoconf-set variables.
+LN_S=@LN_S@
+target_noncanonical=@target_noncanonical@
+
+# Variables for the user (or the top level) to override.
+objext=.o
+TRACE=no
+ADA_FOR_BUILD=
+ADA_FOR_TARGET=
+LDFLAGS=
+STAGE_PREFIX=
+PWD_COMMAND = $${PWDCMD-pwd}
+
+# The tedious process of getting CFLAGS right.
+CFLAGS=-g
+LOOSE_WARN = -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes
+GCC_WARN_CFLAGS = $(LOOSE_WARN) $(NOCOMMON_FLAG)
+
+ADA_CFLAGS=
+T_ADA_CFLAGS=
+# HPPA is literally the only target which sets X_ADA_CFLAGS
+X_ADA_CFLAGS=@x_ada_cflags@
+ALL_ADA_CFLAGS=$(X_ADA_CFLAGS) $(T_ADA_CFLAGS) $(ADA_CFLAGS)
+
+# Variables for gnattools.
+ADAFLAGS= -gnatpg -gnata
+ADA_INCLUDE_DIR = $(libsubdir)/adainclude
+ADA_RTL_OBJ_DIR = $(libsubdir)/adalib
+
+# For finding the GCC build dir, which is used far too much
+GCC_DIR=../gcc
+# Include fragment generated by GCC configure; shared with libada for now.
+include $(GCC_DIR)/libada-mk
+# Variables based on those gleaned from the GCC makefile.  :-P
+libsubdir=$(libdir)/gcc/$(target_noncanonical)/$(gcc_version)
+
+# Get possible host-specific override for libsubdir (ick).
+xmake_file=$(subst /config,/../gcc/config,$(gcc_xmake_file))
+ifneq ($(xmake_file),)
+include $(xmake_file)
+endif
+
+# Absolute srcdir for gcc/ada (why do we want absolute?  I dunno)
+fsrcdir := $(shell cd $(srcdir)/../gcc/ada/; ${PWD_COMMAND})
+
+# Useful "subroutines" for the excess includes
+INCLUDES_FOR_SUBDIR = -I. -I.. -I../.. -I$(fsrcdir) -I$(fsrcdir)/../config \
+	-I$(fsrcdir)/../../include -I$(fsrcdir)/..
+ADA_INCLUDES_FOR_SUBDIR = -I. -I$(fsrcdir)
+
+# Variables for gnattools1, native
+TOOLS_FLAGS_TO_PASS_1= \
+	"CC=../../xgcc -B../../" \
+	"CFLAGS=$(CFLAGS) $(WARN_CFLAGS)" \
+	"LDFLAGS=$(LDFLAGS)" \
+	"ADAFLAGS=$(ADAFLAGS)" \
+	"INCLUDES=$(INCLUDES_FOR_SUBDIR)" \
+	"ADA_INCLUDES=-I- -I../rts $(ADA_INCLUDES_FOR_SUBDIR)"\
+	"exeext=$(exeext)" \
+	"fsrcdir=$(fsrcdir)" \
+	"srcdir=$(fsrcdir)" \
+	"GNATBIND=../../gnatbind" \
+	"TOOLSCASE=native"
+
+# Variables for regnattools
+TOOLS_FLAGS_TO_PASS_1re= \
+	"CC=../../xgcc -B../../" \
+	"CFLAGS=$(CFLAGS)" \
+	"ADAFLAGS=$(ADAFLAGS)" \
+	"INCLUDES=$(INCLUDES_FOR_SUBDIR)" \
+	"ADA_INCLUDES=-I../rts $(ADA_INCLUDES_FOR_SUBDIR)"\
+	"exeext=$(exeext)" \
+	"fsrcdir=$(fsrcdir)" \
+	"srcdir=$(fsrcdir)" \
+	"GNATMAKE=../../gnatmake" \
+	"GNATLINK=../../gnatlink" \
+	"GNATBIND=../../gnatbind" \
+	"TOOLSCASE=cross" \
+	"INCLUDES="
+
+# Variables for gnattools2, native
+TOOLS_FLAGS_TO_PASS_NATIVE= \
+	"CC=../../xgcc -B../../" \
+	"CFLAGS=$(CFLAGS)" \
+	"ADAFLAGS=$(ADAFLAGS)" \
+	"INCLUDES=$(INCLUDES_FOR_SUBDIR)" \
+	"ADA_INCLUDES=-I../rts $(ADA_INCLUDES_FOR_SUBDIR)" \
+	"exeext=$(exeext)" \
+	"fsrcdir=$(fsrcdir)" \
+	"srcdir=$(fsrcdir)" \
+	"GNATMAKE=../../gnatmake" \
+	"GNATLINK=../../gnatlink" \
+	"GNATBIND=../../gnatbind" \
+	"TOOLSCASE=native"
+
+# Variables for gnattools, cross
+TOOLS_FLAGS_TO_PASS_CROSS= \
+	"CC=$(CC)" \
+	"CFLAGS=$(CFLAGS) $(WARN_CFLAGS)" \
+	"LDFLAGS=$(LDFLAGS)" \
+	"ADAFLAGS=$(ADAFLAGS)"	\
+	"INCLUDES=$(INCLUDES_FOR_SUBDIR)" \
+	"ADA_INCLUDES=-I$(RTS_DIR)../adainclude -I$(RTS_DIR) $(ADA_INCLUDES_FOR_SUBDIR)" \
+	"exeext=$(exeext)" \
+	"fsrcdir=$(fsrcdir)" \
+	"srcdir=$(fsrcdir)" \
+	"GNATMAKE=gnatmake" \
+	"GNATLINK=gnatlink" \
+	"GNATBIND=gnatbind" \
+	"TOOLSCASE=cross" \
+	"LIBGNAT="
+
+# File lists
+# ----------
+
+# File associations set by configure
+EXTRA_GNATTOOLS = @EXTRA_GNATTOOLS@
+TOOLS_TARGET_PAIRS = @TOOLS_TARGET_PAIRS@
+
+# These are built by gnatmake, and in both native and cross configurations.
+GNATTOOLS2_FILES = \
+	../../gnatchop$(exeext) \
+	../../gnat$(exeext) \
+	../../gnatkr$(exeext) \
+	../../gnatls$(exeext) \
+	../../gnatprep$(exeext) \
+	../../gnatxref$(exeext) \
+	../../gnatfind$(exeext) \
+	../../gnatname$(exeext) \
+	../../gnatclean$(exeext) \
+	../../gprmake$(exeext)
+
+# Makefile targets
+# ----------------
+
+.PHONY: gnattools gnattools-native gnattools-cross regnattools
+gnattools: @default_gnattools_target@
+
+# Sanity check
+$(GCC_DIR)/stamp-gnatlib:
+	@if [ ! -f $(GCC_DIR)/stamp-gnatlib ] ; \
+        then \
+          echo Can't build gnattools while gnatlib is out of date or unbuilt ; \
+          false; \
+        else \
+          true; \
+        fi
+
+
+# Build directory for the tools. Let's copy the target-dependent
+# sources using the same mechanism as for gnatlib. The other sources are
+# accessed using the vpath directive in ada/Makefile.in
+
+$(GCC_DIR)/stamp-tools:
+	-rm -rf $(GCC_DIR)/ada/tools
+	-mkdir -p $(GCC_DIR)/ada/tools
+	-(cd $(GCC_DIR)/ada/tools; $(LN_S) ../sdefault.adb .)
+	-$(foreach PAIR,$(TOOLS_TARGET_PAIRS), \
+	          rm -f $(GCC_DIR)/ada/tools/$(word 1,$(subst <, ,$(PAIR)));\
+	          $(LN_S) $(fsrcdir)/$(word 2,$(subst <, ,$(PAIR))) \
+	                $(GCC_DIR)/ada/tools/$(word 1,$(subst <, ,$(PAIR)));)
+	touch $(GCC_DIR)/stamp-tools
+
+# gnatmake/link tools cannot always be built with gnatmake/link for bootstrap 
+# reasons: gnatmake should be built with a recent compiler, a recent compiler
+# may not generate ALI files compatible with an old gnatmake so it is important
+# to be able to build gnatmake without a version of gnatmake around. Once 
+# everything has been compiled once, gnatmake can be recompiled with itself 
+# (see target regnattools) 
+gnattools-native: $(GCC_DIR)/stamp-tools $(GCC_DIR)/stamp-gnatlib
+	# gnattools1
+	$(MAKE) -C $(GCC_DIR)/ada/tools -f ../Makefile \
+	  $(TOOLS_FLAGS_TO_PASS_1) \
+	  ../../gnatmake$(exeext) ../../gnatlink$(exeext) ../../gnatbl$(exeext)
+	# gnattools2
+	$(MAKE) -C $(GCC_DIR)/ada/tools -f ../Makefile \
+	  $(TOOLS_FLAGS_TO_PASS_NATIVE) \
+	  $(GNATTOOLS2_FILES)
+
+# gnatmake/link can be built with recent gnatmake/link if they are available.
+# This is especially convenient for building cross tools or for rebuilding
+# the tools when the original bootstrap has already be done.
+regnattools: $(GCC_DIR)/stamp-gnatlib
+	# gnattools1-re
+	$(MAKE) -C $(GCC_DIR)/ada/tools -f ../Makefile \
+	  $(TOOLS_FLAGS_TO_PASS_1re) \
+	  gnatmake-re gnatlink-re
+	# gnattools2
+	$(MAKE) -C $(GCC_DIR)/ada/tools -f ../Makefile \
+	  $(TOOLS_FLAGS_TO_PASS_NATIVE) \
+	  $(GNATTOOLS2_FILES)
+
+# For cross builds of gnattools,
+# put the host RTS dir first in the PATH to hide the default runtime
+# files that are among the sources
+# FIXME: This should be done in configure.
+RTS_DIR:=$(strip $(subst \,/,$(shell gnatls -v | grep adalib )))
+gnattools-cross: $(GCC_DIR)/stamp-tools $(GCC_DIR)/stamp-gnatlib
+	# gnattools1-re
+	$(MAKE) -C $(GCC_DIR)/ada/tools -f ../Makefile \
+	  $(TOOLS_FLAGS_TO_PASS_CROSS) INCLUDES="" \
+	  gnatmake-re gnatlink-re
+	# gnattools2
+	$(MAKE) -C $(GCC_DIR)/ada/tools -f ../Makefile \
+	  $(TOOLS_FLAGS_TO_PASS_CROSS) \
+	  $(GNATTOOLS2_FILES)
+	# gnattools4 (cross only)
+	$(MAKE) -C $(GCC_DIR)/ada/tools -f ../Makefile \
+	  $(TOOLS_FLAGS_TO_PASS_CROSS) \
+	  top_buildir=../../.. \
+           ../../vxaddr2line$(exeext)
+	# Rename cross tools to where the GCC makefile wants them when
+	# installing.  FIXME: installation should be done elsewhere.
+	if [ -f $(GCC_DIR)/gnatbind$(exeext) ] ; then \
+	  mv $(GCC_DIR)/gnatbind$(exeext) $(GCC_DIR)/gnatbind-cross$(exeext); \
+	fi
+	if [ -f $(GCC_DIR)/gnatbl$(exeext) ] ; then \
+	  mv $(GCC_DIR)/gnatbl$(exeext) $(GCC_DIR)/gnatbl-cross$(exeext); \
+	fi
+	if [ -f $(GCC_DIR)/gnatchop$(exeext) ] ; then \
+	  mv $(GCC_DIR)/gnatchop$(exeext) $(GCC_DIR)/gnatchop-cross$(exeext); \
+	fi
+	if [ -f $(GCC_DIR)/gnat$(exeext) ] ; then \
+	  mv $(GCC_DIR)/gnat$(exeext) $(GCC_DIR)/gnat-cross$(exeext); \
+	fi
+	if [ -f $(GCC_DIR)/gnatkr$(exeext) ] ; then \
+	  mv $(GCC_DIR)/gnatkr$(exeext) $(GCC_DIR)/gnatkr-cross$(exeext); \
+	fi
+	if [ -f $(GCC_DIR)/gnatlink$(exeext) ] ; then \
+	  mv $(GCC_DIR)/gnatlink$(exeext) $(GCC_DIR)/gnatlink-cross$(exeext); \
+	fi
+	if [ -f $(GCC_DIR)/gnatls$(exeext) ] ; then \
+	  mv $(GCC_DIR)/gnatls$(exeext) $(GCC_DIR)/gnatls-cross$(exeext); \
+	fi
+	if [ -f $(GCC_DIR)/gnatmake$(exeext) ] ; then \
+	  mv $(GCC_DIR)/gnatmake$(exeext) $(GCC_DIR)/gnatmake-cross$(exeext); \
+	fi
+	if [ -f $(GCC_DIR)/gnatmem$(exeext) ] ; then \
+	  mv $(GCC_DIR)/gnatmem$(exeext) $(GCC_DIR)/gnatmem-cross$(exeext); \
+	fi
+	if [ -f $(GCC_DIR)/gnatname$(exeext) ] ; then \
+	  mv $(GCC_DIR)/gnatname$(exeext) $(GCC_DIR)/gnatname-cross$(exeext); \
+	fi
+	if [ -f $(GCC_DIR)/gnatprep$(exeext) ] ; then \
+	  mv $(GCC_DIR)/gnatprep$(exeext) $(GCC_DIR)/gnatprep-cross$(exeext); \
+	fi
+	if [ -f $(GCC_DIR)/gnatxref$(exeext) ] ; then \
+	  mv $(GCC_DIR)/gnatxref$(exeext) $(GCC_DIR)/gnatxref-cross$(exeext); \
+	fi
+	if [ -f $(GCC_DIR)/gnatfind$(exeext) ] ; then \
+	  mv $(GCC_DIR)/gnatfind$(exeext) $(GCC_DIR)/gnatfind-cross$(exeext); \
+	fi
+	if [ -f $(GCC_DIR)/gnatclean$(exeext) ] ; then \
+	  mv $(GCC_DIR)/gnatclean$(exeext) $(GCC_DIR)/gnatclean-cross$(exeext); \
+	fi
+	if [ -f $(GCC_DIR)/gnatsym$(exeext) ] ; then \
+	  mv $(GCC_DIR)/gnatsym$(exeext) $(GCC_DIR)/gnatsym-cross$(exeext); \
+	fi
+
+# Other
+# -----
+
+# Check uninstalled version.
+check:
+
+# Check installed version.
+installcheck:
+
+# Build info (none here).
+info:
+
+# Build DVI (none here).
+dvi:
+
+# Build TAGS (none here).
+TAGS:
+
+# Installation rules.
+install:
+
+install-info:
+
+# Cleaning rules.
+mostlyclean:
+
+clean:
+
+distclean:
+	$(RM) Makefile config.status config.log
+
+maintainer-clean:
+
+# Rules for rebuilding this Makefile.
+Makefile: $(srcdir)/Makefile.in config.status
+	CONFIG_FILES=$@ ; \
+	CONFIG_HEADERS= ; \
+	$(SHELL) ./config.status
+
+config.status: $(srcdir)/configure
+	$(SHELL) ./config.status --recheck
+
+$(srcdir)/configure: @MAINT@ $(srcdir)/configure.ac
+	cd $(srcdir) && autoconf
+
+# Don't export variables to the environment, in order to not confuse
+# configure.
+.NOEXPORT:
+
diff --git a/gnattools/configure b/gnattools/configure
new file mode 100755
index 0000000..9e299b7
--- /dev/null
+++ b/gnattools/configure
@@ -0,0 +1,2574 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.59.
+#
+# Copyright (C) 2003 Free Software Foundation, Inc.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+  LC_TELEPHONE LC_TIME
+do
+  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+    eval $as_var=C; export $as_var
+  else
+    $as_unset $as_var
+  fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)$' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\/\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
+  # Find who we are.  Look in the path if we contain no path at all
+  # relative or not.
+  case $0 in
+    *[\\/]* ) as_myself=$0 ;;
+    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+       ;;
+  esac
+  # We did not find ourselves, most probably we were run as `sh COMMAND'
+  # in which case we are not to be found in the path.
+  if test "x$as_myself" = x; then
+    as_myself=$0
+  fi
+  if test ! -f "$as_myself"; then
+    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
+   { (exit 1); exit 1; }; }
+  fi
+  case $CONFIG_SHELL in
+  '')
+    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for as_base in sh bash ksh sh5; do
+	 case $as_dir in
+	 /*)
+	   if ("$as_dir/$as_base" -c '
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
+	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+	     CONFIG_SHELL=$as_dir/$as_base
+	     export CONFIG_SHELL
+	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+	   fi;;
+	 esac
+       done
+done
+;;
+  esac
+
+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line before each line; the second 'sed' does the real
+  # work.  The second script uses 'N' to pair each line-number line
+  # with the numbered line, and appends trailing '-' during
+  # substitution so that $LINENO is not a special case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
+  sed '=' <$as_myself |
+    sed '
+      N
+      s,$,-,
+      : loop
+      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      t loop
+      s,-$,,
+      s,^['$as_cr_digits']*\n,,
+    ' >$as_me.lineno &&
+  chmod +x $as_me.lineno ||
+    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensible to this).
+  . ./$as_me.lineno
+  # Exit status is that of the last command.
+  exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+  *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T='	' ;;
+  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+  # We could just check for DJGPP; but this test a) works b) is more generic
+  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+  if test -f conf$$.exe; then
+    # Don't use ln at all; we don't have any links
+    as_ln_s='cp -p'
+  else
+    as_ln_s='ln -s'
+  fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s=ln
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" 	$as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+exec 6>&1
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_config_libobj_dir=.
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Maximum number of lines to put in a shell here document.
+# This variable seems obsolete.  It should probably be removed, and
+# only ac_max_sed_lines should be used.
+: ${ac_max_here_lines=38}
+
+# Identity of this package.
+PACKAGE_NAME=
+PACKAGE_TARNAME=
+PACKAGE_VERSION=
+PACKAGE_STRING=
+PACKAGE_BUGREPORT=
+
+ac_unique_file="Makefile.in"
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAINT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os target_noncanonical LN_S x_ada_cflags default_gnattools_target TOOLS_TARGET_PAIRS EXTRA_GNATTOOLS LIBOBJS LTLIBOBJS'
+ac_subst_files=''
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+ac_prev=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_option in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+   { (exit 1); exit 1; }; }
+    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+    eval "enable_$ac_feature=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+   { (exit 1); exit 1; }; }
+    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+    case $ac_option in
+      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_$ac_feature='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid package name: $ac_package" >&2
+   { (exit 1); exit 1; }; }
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case $ac_option in
+      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_$ac_package='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid package name: $ac_package" >&2
+   { (exit 1); exit 1; }; }
+    ac_package=`echo $ac_package | sed 's/-/_/g'`
+    eval "with_$ac_package=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+   { (exit 1); exit 1; }; }
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+   { (exit 1); exit 1; }; }
+    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
+    eval "$ac_envvar='$ac_optarg'"
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  { echo "$as_me: error: missing argument to $ac_option" >&2
+   { (exit 1); exit 1; }; }
+fi
+
+# Be sure to have absolute paths.
+for ac_var in exec_prefix prefix
+do
+  eval ac_val=$`echo $ac_var`
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
+    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+# Be sure to have absolute paths.
+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
+	      localstatedir libdir includedir oldincludedir infodir mandir
+do
+  eval ac_val=$`echo $ac_var`
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* ) ;;
+    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used." >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_confdir=`(dirname "$0") 2>/dev/null ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$0" : 'X\(//\)[^/]' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$0" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
+   { (exit 1); exit 1; }; }
+  else
+    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+   { (exit 1); exit 1; }; }
+  fi
+fi
+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+   { (exit 1); exit 1; }; }
+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+ac_env_build_alias_set=${build_alias+set}
+ac_env_build_alias_value=$build_alias
+ac_cv_env_build_alias_set=${build_alias+set}
+ac_cv_env_build_alias_value=$build_alias
+ac_env_host_alias_set=${host_alias+set}
+ac_env_host_alias_value=$host_alias
+ac_cv_env_host_alias_set=${host_alias+set}
+ac_cv_env_host_alias_value=$host_alias
+ac_env_target_alias_set=${target_alias+set}
+ac_env_target_alias_value=$target_alias
+ac_cv_env_target_alias_set=${target_alias+set}
+ac_cv_env_target_alias_value=$target_alias
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures this package to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+_ACEOF
+
+  cat <<_ACEOF
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+			  [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+			  [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR           user executables [EPREFIX/bin]
+  --sbindir=DIR          system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR       program executables [EPREFIX/libexec]
+  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
+  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
+  --libdir=DIR           object code libraries [EPREFIX/lib]
+  --includedir=DIR       C header files [PREFIX/include]
+  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
+  --infodir=DIR          info documentation [PREFIX/info]
+  --mandir=DIR           man documentation [PREFIX/man]
+_ACEOF
+
+  cat <<\_ACEOF
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+  --target=TARGET   configure for building compilers for TARGET [HOST]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-maintainer-mode
+                          enable make rules and dependencies not useful (and
+                          sometimes confusing) to the casual installer
+
+_ACEOF
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  ac_popdir=`pwd`
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d $ac_dir || continue
+    ac_builddir=.
+
+if test "$ac_dir" != .; then
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A "../" for each directory in $ac_dir_suffix.
+  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+  ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+  .)  # No --srcdir option.  We are building in place.
+    ac_srcdir=.
+    if test -z "$ac_top_builddir"; then
+       ac_top_srcdir=.
+    else
+       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+    fi ;;
+  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir ;;
+  *) # Relative path.
+    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+  case "$ac_dir" in
+  .) ac_abs_builddir=`pwd`;;
+  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+  *) ac_abs_builddir=`pwd`/"$ac_dir";;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+  case ${ac_top_builddir}. in
+  .) ac_abs_top_builddir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+  case $ac_srcdir in
+  .) ac_abs_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+  case $ac_top_srcdir in
+  .) ac_abs_top_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+  esac;;
+esac
+
+    cd $ac_dir
+    # Check for guested configure; otherwise get Cygnus style configure.
+    if test -f $ac_srcdir/configure.gnu; then
+      echo
+      $SHELL $ac_srcdir/configure.gnu  --help=recursive
+    elif test -f $ac_srcdir/configure; then
+      echo
+      $SHELL $ac_srcdir/configure  --help=recursive
+    elif test -f $ac_srcdir/configure.ac ||
+	   test -f $ac_srcdir/configure.in; then
+      echo
+      $ac_configure --help
+    else
+      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi
+    cd "$ac_popdir"
+  done
+fi
+
+test -n "$ac_init_help" && exit 0
+if $ac_init_version; then
+  cat <<\_ACEOF
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit 0
+fi
+exec 5>config.log
+cat >&5 <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by $as_me, which was
+generated by GNU Autoconf 2.59.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  echo "PATH: $as_dir"
+done
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_sep=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+    2)
+      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+      # Get rid of the leading space.
+      ac_sep=" "
+      ;;
+    esac
+  done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Be sure not to use single quotes in there, as some shells,
+# such as our DU 5.0 friend, will then `close' the trap.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+{
+  (set) 2>&1 |
+    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+    *ac_space=\ *)
+      sed -n \
+	"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+      ;;
+    *)
+      sed -n \
+	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      ;;
+    esac;
+}
+    echo
+
+    cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=$`echo $ac_var`
+      echo "$ac_var='"'"'$ac_val'"'"'"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      cat <<\_ASBOX
+## ------------- ##
+## Output files. ##
+## ------------- ##
+_ASBOX
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=$`echo $ac_var`
+	echo "$ac_var='"'"'$ac_val'"'"'"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+      echo
+      sed "/^$/d" confdefs.h | sort
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      echo "$as_me: caught signal $ac_signal"
+    echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core &&
+  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+     ' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo >confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special
+  # files actually), so we avoid doing that.
+  if test -f "$cache_file"; then
+    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . $cache_file;;
+      *)                      . ./$cache_file;;
+    esac
+  fi
+else
+  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in `(set) 2>&1 |
+	       sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+  eval ac_new_val="\$ac_env_${ac_var}_value"
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
+echo "$as_me:   former value:  $ac_old_val" >&2;}
+	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
+echo "$as_me:   current value: $ac_new_val" >&2;}
+	ac_cache_corrupted=:
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Command-line options.
+# Very limited version of AC_MAINTAINER_MODE.
+# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+  enableval="$enable_maintainer_mode"
+  case ${enable_maintainer_mode} in
+     yes) MAINT='' ;;
+     no) MAINT='#' ;;
+     *) { { echo "$as_me:$LINENO: error: --enable-maintainer-mode must be yes or no" >&5
+echo "$as_me: error: --enable-maintainer-mode must be yes or no" >&2;}
+   { (exit 1); exit 1; }; } ;;
+   esac
+   maintainer_mode=${enableval}
+else
+  MAINT='#'
+fi;
+
+# Start of actual configure tests
+
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f $ac_dir/shtool; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+  ./ | .// | /cC/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	    break 3
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+done
+
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the path is relative.
+    INSTALL=$ac_install_sh
+  fi
+fi
+echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+# Make sure we can run config.sub.
+$ac_config_sub sun4 >/dev/null 2>&1 ||
+  { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
+echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+   { (exit 1); exit 1; }; }
+
+echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6
+if test "${ac_cv_build+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_build_alias=$build_alias
+test -z "$ac_cv_build_alias" &&
+  ac_cv_build_alias=`$ac_config_guess`
+test -z "$ac_cv_build_alias" &&
+  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+   { (exit 1); exit 1; }; }
+ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
+  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6
+build=$ac_cv_build
+build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6
+if test "${ac_cv_host+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_host_alias=$host_alias
+test -z "$ac_cv_host_alias" &&
+  ac_cv_host_alias=$ac_cv_build_alias
+ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
+  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6
+host=$ac_cv_host
+host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+echo "$as_me:$LINENO: checking target system type" >&5
+echo $ECHO_N "checking target system type... $ECHO_C" >&6
+if test "${ac_cv_target+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_target_alias=$target_alias
+test "x$ac_cv_target_alias" = "x" &&
+  ac_cv_target_alias=$ac_cv_host_alias
+ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
+  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_target" >&5
+echo "${ECHO_T}$ac_cv_target" >&6
+target=$ac_cv_target
+target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+test -n "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+# Autoconf M4 include file defining utility macros for complex Canadian
+# cross builds.
+
+
+
+
+
+
+
+
+
+####
+# _NCN_TOOL_PREFIXES:  Some stuff that oughtta be done in AC_CANONICAL_SYSTEM
+# or AC_INIT.
+# These demand that AC_CANONICAL_SYSTEM be called beforehand.
+
+####
+# NCN_CHECK_TARGET_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
+# Like AC_CHECK_TOOL, but tries a prefix of the target, not the host.
+# Code is pretty much lifted from autoconf2.53.
+
+
+
+####
+# NCN_STRICT_CHECK_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
+# Like AC_CHECK_TOOL, but requires the prefix if build!=host.
+
+
+
+####
+# NCN_STRICT_CHECK_TARGET_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
+# Like NCN_CHECK_TARGET_TOOL, but requires the prefix if build!=target.
+
+
+###
+# AC_PROG_CPP_WERROR
+# Used for autoconf 2.5x to force AC_PREPROC_IFELSE to reject code which
+# triggers warnings from the preprocessor.  Will be in autoconf 2.58.
+# For now, using this also overrides header checks to use only the
+# preprocessor (matches 2.13 behavior; matching 2.58's behavior is a
+# bit harder from here).
+# Eventually autoconf will default to checking headers with the compiler
+# instead, and we'll have to do this differently.
+
+# AC_PROG_CPP_WERROR
+
+# Test for GNAT.
+# We require the gnatbind program, and a compiler driver that
+# understands Ada.  We use the user's CC setting, already found.
+#
+# Sets the shell variable have_gnat to yes or no as appropriate, and
+# substitutes GNATBIND.
+
+
+
+
+
+
+
+
+
+
+
+ case ${build_alias} in
+  "") build_noncanonical=${build} ;;
+  *) build_noncanonical=${build_alias} ;;
+esac
+
+ case ${host_alias} in
+  "") host_noncanonical=${build_noncanonical} ;;
+  *) host_noncanonical=${host_alias} ;;
+esac
+
+ case ${target_alias} in
+  "") target_noncanonical=${host_noncanonical} ;;
+  *) target_noncanonical=${target_alias} ;;
+esac
+
+
+
+
+# Need to pass this down for now :-P
+echo "$as_me:$LINENO: checking whether ln -s works" >&5
+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+  echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+echo "${ECHO_T}no, using $LN_S" >&6
+fi
+
+
+# Determine x_ada_cflags
+case $host in
+  hppa*) x_ada_cflags=-mdisable-indexing ;;
+  *) x_ada_cflags= ;;
+esac
+
+
+# Determine what to build for 'gnattools'
+if test $build = $target ; then
+  # Note that build=target is almost certainly the wrong test; FIXME
+  default_gnattools_target="gnattools-native"
+else
+  default_gnattools_target="gnattools-cross"
+fi
+
+
+# Target-specific stuff (defaults)
+TOOLS_TARGET_PAIRS=
+
+EXTRA_GNATTOOLS=
+
+
+# Per-target case statement
+# -------------------------
+case "${target}" in
+  alpha*-dec-vx*) # Unlike all other Vxworks
+    ;;
+  m68k*-wrs-vx* \
+  | powerpc*-wrs-vxworks \
+  | sparc*-wrs-vx* \
+  | *86-wrs-vxworks \
+  | xscale*-wrs-vx* \
+  | xscale*-wrs-coff \
+  | mips*-wrs-vx*)
+    TOOLS_TARGET_PAIRS="mlib-tgt.adb<mlib-tgt-vxworks.adb"
+    ;;
+  sparc-sun-solaris*)
+    TOOLS_TARGET_PAIRS="mlib-tgt.adb<mlib-tgt-solaris.adb"
+    ;;
+  *86-*-solaris2*)
+    TOOLS_TARGET_PAIRS="mlib-tgt.adb<mlib-tgt-solaris.adb"
+    ;;
+  *86-*-linux* \
+  | powerpc*-*-linux*)
+    TOOLS_TARGET_PAIRS="\
+    mlib-tgt.adb<mlib-tgt-linux.adb \
+    indepsw.adb<indepsw-linux.adb"
+    ;;
+  *ia64-*-linux* \
+  | alpha*-*-linux )
+    TOOLS_TARGET_PAIRS="\
+    mlib-tgt.adb<mlib-tgt-linux.adb \
+    indepsw.adb<indepsw-linux.adb"
+    ;;
+  *x86_64-*-linux* \
+  | s390*-*-linux*)
+    TOOLS_TARGET_PAIRS="mlib-tgt.adb<mlib-tgt-linux.adb"
+    ;;
+  *86-*-freebsd*)
+    TOOLS_TARGET_PAIRS="\
+    mlib-tgt.adb<mlib-tgt-linux.adb"
+    ;;
+  mips-sgi-irix*)
+    TOOLS_TARGET_PAIRS="mlib-tgt.adb<mlib-tgt-irix.adb"
+    ;;
+  hppa*-hp-hpux10*) # Unlike hpux11
+    ;;
+  hppa*-hp-hpux11*)
+    TOOLS_TARGET_PAIRS="mlib-tgt.adb<mlib-tgt-hpux.adb"
+    ;;
+  *-ibm-aix*)
+    TOOLS_TARGET_PAIRS="\
+    mlib-tgt.adb<mlib-tgt-aix.adb \
+    indepsw.adb<indepsw-aix.adb"
+    ;;
+  alpha*-dec-osf*)
+    TOOLS_TARGET_PAIRS="mlib-tgt.adb<mlib-tgt-tru64.adb"
+    ;;
+  alpha*-dec-vms* | alpha*-dec-openvms* | alpha*-dec-vms* \
+  | alpha*-hp-vms* | alpha*-hp-openvms* | alpha*-hp-vms*)
+    TOOLS_TARGET_PAIRS="\
+    mlib-tgt.adb<mlib-tgt-vms-alpha.adb \
+    symbols.adb<symbols-vms-alpha.adb"
+
+    EXTRA_GNATTOOLS='../../gnatlbr$(exeext) ../../gnatsym$(exeext)'
+    ;;
+  ia64*-dec-vms* | ia64*-dec-openvms* | ia64*-dec-vms* \
+  | ia64*-hp-vms* | ia64*-hp-openvms* | ia64*-hp-vms*)
+    TOOLS_TARGET_PAIRS="\
+    mlib-tgt.adb<mlib-tgt-vms-ia64.adb \
+    symbols.adb<symbols-vms-ia64.adb"
+
+    EXTRA_GNATTOOLS='../../gnatlbr$(exeext) ../../gnatsym$(exeext)'
+    ;;
+  *-*-cygwin32* | *-*-mingw32* | *-*-pe)
+    TOOLS_TARGET_PAIRS="\
+    mlib-tgt.adb<mlib-tgt-mingw.adb \
+    indepsw.adb<indepsw-mingw.adb"
+    EXTRA_GNATTOOLS='../../gnatdll$(exeext)'
+    ;;
+  powerpc-*-darwin*)
+    TOOLS_TARGET_PAIRS="mlib-tgt.adb<mlib-tgt-darwin.adb"
+    ;;
+  *-*-lynxos)
+    TOOLS_TARGET_PAIRS="mlib-tgt.adb<mlib-tgt-lynxos.adb"
+    ;;
+esac
+
+# Output: create a Makefile.
+          ac_config_files="$ac_config_files Makefile"
+
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+{
+  (set) 2>&1 |
+    case `(ac_space=' '; set | grep ac_space) 2>&1` in
+    *ac_space=\ *)
+      # `set' does not quote correctly, so add quotes (double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \).
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;;
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n \
+	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      ;;
+    esac;
+} |
+  sed '
+     t clear
+     : clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     : end' >>confcache
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
+  if test -w $cache_file; then
+    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+    cat confcache >$cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:*@srcdir@:*/:/;
+s/^\([^=]*=[	 ]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[	 ]*$//;
+}'
+fi
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then we branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+cat >confdef2opt.sed <<\_ACEOF
+t clear
+: clear
+s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\),-D\1=\2,g
+t quote
+s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\),-D\1=\2,g
+t quote
+d
+: quote
+s,[	 `~#$^&*(){}\\|;'"<>?],\\&,g
+s,\[,\\&,g
+s,\],\\&,g
+s,\$,$$,g
+p
+_ACEOF
+# We use echo to avoid assuming a particular line-breaking character.
+# The extra dot is to prevent the shell from consuming trailing
+# line-breaks from the sub-command output.  A line-break within
+# single-quotes doesn't work because, if this script is created in a
+# platform that uses two characters for line-breaks (e.g., DOS), tr
+# would break.
+ac_LF_and_DOT=`echo; echo .`
+DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
+rm -f confdef2opt.sed
+
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_i=`echo "$ac_i" |
+	 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+  # 2. Add them.
+  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+  LC_TELEPHONE LC_TIME
+do
+  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+    eval $as_var=C; export $as_var
+  else
+    $as_unset $as_var
+  fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)$' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\/\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
+  # Find who we are.  Look in the path if we contain no path at all
+  # relative or not.
+  case $0 in
+    *[\\/]* ) as_myself=$0 ;;
+    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+       ;;
+  esac
+  # We did not find ourselves, most probably we were run as `sh COMMAND'
+  # in which case we are not to be found in the path.
+  if test "x$as_myself" = x; then
+    as_myself=$0
+  fi
+  if test ! -f "$as_myself"; then
+    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
+   { (exit 1); exit 1; }; }
+  fi
+  case $CONFIG_SHELL in
+  '')
+    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for as_base in sh bash ksh sh5; do
+	 case $as_dir in
+	 /*)
+	   if ("$as_dir/$as_base" -c '
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
+	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+	     CONFIG_SHELL=$as_dir/$as_base
+	     export CONFIG_SHELL
+	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+	   fi;;
+	 esac
+       done
+done
+;;
+  esac
+
+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line before each line; the second 'sed' does the real
+  # work.  The second script uses 'N' to pair each line-number line
+  # with the numbered line, and appends trailing '-' during
+  # substitution so that $LINENO is not a special case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
+  sed '=' <$as_myself |
+    sed '
+      N
+      s,$,-,
+      : loop
+      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      t loop
+      s,-$,,
+      s,^['$as_cr_digits']*\n,,
+    ' >$as_me.lineno &&
+  chmod +x $as_me.lineno ||
+    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensible to this).
+  . ./$as_me.lineno
+  # Exit status is that of the last command.
+  exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+  *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T='	' ;;
+  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+  # We could just check for DJGPP; but this test a) works b) is more generic
+  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+  if test -f conf$$.exe; then
+    # Don't use ln at all; we don't have any links
+    as_ln_s='cp -p'
+  else
+    as_ln_s='ln -s'
+  fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s=ln
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" 	$as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+exec 6>&1
+
+# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.  Logging --version etc. is OK.
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+} >&5
+cat >&5 <<_CSEOF
+
+This file was extended by $as_me, which was
+generated by GNU Autoconf 2.59.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+_CSEOF
+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
+echo >&5
+_ACEOF
+
+# Files that config.status was made for.
+if test -n "$ac_config_files"; then
+  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_headers"; then
+  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_links"; then
+  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_commands"; then
+  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number, then exit
+  -q, --quiet      do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+  --file=FILE[:TEMPLATE]
+		   instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Report bugs to <bug-autoconf@gnu.org>."
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+config.status
+configured by $0, generated by GNU Autoconf 2.59,
+  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+srcdir=$srcdir
+INSTALL="$INSTALL"
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value.  By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=*)
+    ac_option=`expr "x$1" : 'x\([^=]*\)='`
+    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  -*)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  *) # This is not an option, so the user has probably given explicit
+     # arguments.
+     ac_option=$1
+     ac_need_defaults=false;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --vers* | -V )
+    echo "$ac_cs_version"; exit 0 ;;
+  --he | --h)
+    # Conflict between --help and --header
+    { { echo "$as_me:$LINENO: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2;}
+   { (exit 1); exit 1; }; };;
+  --help | --hel | -h )
+    echo "$ac_cs_usage"; exit 0 ;;
+  --debug | --d* | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+    ac_need_defaults=false;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2;}
+   { (exit 1); exit 1; }; } ;;
+
+  *) ac_config_targets="$ac_config_targets $1" ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
+_ACEOF
+
+
+
+
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_config_target in $ac_config_targets
+do
+  case "$ac_config_target" in
+  # Handling of arguments.
+  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason to put it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+  trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+  test -n "$tmp" && test -d "$tmp"
+}  ||
+{
+  tmp=./confstat$$-$RANDOM
+  (umask 077 && mkdir $tmp)
+} ||
+{
+   echo "$me: cannot create a temporary directory in ." >&2
+   { (exit 1); exit 1; }
+}
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+
+#
+# CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "\$CONFIG_FILES"; then
+  # Protect against being on the right side of a sed subst in config.status.
+  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
+   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
+s,@SHELL@,$SHELL,;t t
+s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
+s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
+s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
+s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
+s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
+s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
+s,@exec_prefix@,$exec_prefix,;t t
+s,@prefix@,$prefix,;t t
+s,@program_transform_name@,$program_transform_name,;t t
+s,@bindir@,$bindir,;t t
+s,@sbindir@,$sbindir,;t t
+s,@libexecdir@,$libexecdir,;t t
+s,@datadir@,$datadir,;t t
+s,@sysconfdir@,$sysconfdir,;t t
+s,@sharedstatedir@,$sharedstatedir,;t t
+s,@localstatedir@,$localstatedir,;t t
+s,@libdir@,$libdir,;t t
+s,@includedir@,$includedir,;t t
+s,@oldincludedir@,$oldincludedir,;t t
+s,@infodir@,$infodir,;t t
+s,@mandir@,$mandir,;t t
+s,@build_alias@,$build_alias,;t t
+s,@host_alias@,$host_alias,;t t
+s,@target_alias@,$target_alias,;t t
+s,@DEFS@,$DEFS,;t t
+s,@ECHO_C@,$ECHO_C,;t t
+s,@ECHO_N@,$ECHO_N,;t t
+s,@ECHO_T@,$ECHO_T,;t t
+s,@LIBS@,$LIBS,;t t
+s,@MAINT@,$MAINT,;t t
+s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
+s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
+s,@INSTALL_DATA@,$INSTALL_DATA,;t t
+s,@build@,$build,;t t
+s,@build_cpu@,$build_cpu,;t t
+s,@build_vendor@,$build_vendor,;t t
+s,@build_os@,$build_os,;t t
+s,@host@,$host,;t t
+s,@host_cpu@,$host_cpu,;t t
+s,@host_vendor@,$host_vendor,;t t
+s,@host_os@,$host_os,;t t
+s,@target@,$target,;t t
+s,@target_cpu@,$target_cpu,;t t
+s,@target_vendor@,$target_vendor,;t t
+s,@target_os@,$target_os,;t t
+s,@target_noncanonical@,$target_noncanonical,;t t
+s,@LN_S@,$LN_S,;t t
+s,@x_ada_cflags@,$x_ada_cflags,;t t
+s,@default_gnattools_target@,$default_gnattools_target,;t t
+s,@TOOLS_TARGET_PAIRS@,$TOOLS_TARGET_PAIRS,;t t
+s,@EXTRA_GNATTOOLS@,$EXTRA_GNATTOOLS,;t t
+s,@LIBOBJS@,$LIBOBJS,;t t
+s,@LTLIBOBJS@,$LTLIBOBJS,;t t
+CEOF
+
+_ACEOF
+
+  cat >>$CONFIG_STATUS <<\_ACEOF
+  # Split the substitutions into bite-sized pieces for seds with
+  # small command number limits, like on Digital OSF/1 and HP-UX.
+  ac_max_sed_lines=48
+  ac_sed_frag=1 # Number of current file.
+  ac_beg=1 # First line for current file.
+  ac_end=$ac_max_sed_lines # Line after last line for current file.
+  ac_more_lines=:
+  ac_sed_cmds=
+  while $ac_more_lines; do
+    if test $ac_beg -gt 1; then
+      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+    else
+      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+    fi
+    if test ! -s $tmp/subs.frag; then
+      ac_more_lines=false
+    else
+      # The purpose of the label and of the branching condition is to
+      # speed up the sed processing (if there are no `@' at all, there
+      # is no need to browse any of the substitutions).
+      # These are the two extra sed commands mentioned above.
+      (echo ':t
+  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
+      if test -z "$ac_sed_cmds"; then
+	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+      else
+	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+      fi
+      ac_sed_frag=`expr $ac_sed_frag + 1`
+      ac_beg=$ac_end
+      ac_end=`expr $ac_end + $ac_max_sed_lines`
+    fi
+  done
+  if test -z "$ac_sed_cmds"; then
+    ac_sed_cmds=cat
+  fi
+fi # test -n "$CONFIG_FILES"
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case $ac_file in
+  - | *:- | *:-:* ) # input from stdin
+	cat >$tmp/stdin
+	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  * )   ac_file_in=$ac_file.in ;;
+  esac
+
+  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  { if $as_mkdir_p; then
+    mkdir -p "$ac_dir"
+  else
+    as_dir="$ac_dir"
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+   { (exit 1); exit 1; }; }; }
+
+  ac_builddir=.
+
+if test "$ac_dir" != .; then
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A "../" for each directory in $ac_dir_suffix.
+  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+  ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+  .)  # No --srcdir option.  We are building in place.
+    ac_srcdir=.
+    if test -z "$ac_top_builddir"; then
+       ac_top_srcdir=.
+    else
+       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+    fi ;;
+  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir ;;
+  *) # Relative path.
+    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+  case "$ac_dir" in
+  .) ac_abs_builddir=`pwd`;;
+  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+  *) ac_abs_builddir=`pwd`/"$ac_dir";;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+  case ${ac_top_builddir}. in
+  .) ac_abs_top_builddir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+  case $ac_srcdir in
+  .) ac_abs_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+  case $ac_top_srcdir in
+  .) ac_abs_top_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+  esac;;
+esac
+
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+  esac
+
+  # Let's still pretend it is `configure' which instantiates (i.e., don't
+  # use $as_me), people would be surprised to read:
+  #    /* config.h.  Generated by config.status.  */
+  if test x"$ac_file" = x-; then
+    configure_input=
+  else
+    configure_input="$ac_file.  "
+  fi
+  configure_input=$configure_input"Generated from `echo $ac_file_in |
+				     sed 's,.*/,,'` by configure."
+
+  # First look for the input files in the build tree, otherwise in the
+  # src tree.
+  ac_file_inputs=`IFS=:
+    for f in $ac_file_in; do
+      case $f in
+      -) echo $tmp/stdin ;;
+      [\\/$]*)
+	 # Absolute (can't be DOS-style, as IFS=:)
+	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+	 echo "$f";;
+      *) # Relative
+	 if test -f "$f"; then
+	   # Build tree
+	   echo "$f"
+	 elif test -f "$srcdir/$f"; then
+	   # Source tree
+	   echo "$srcdir/$f"
+	 else
+	   # /dev/null tree
+	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+	 fi;;
+      esac
+    done` || { (exit 1); exit 1; }
+
+  if test x"$ac_file" != x-; then
+    { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+    rm -f "$ac_file"
+  fi
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+  sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s,@configure_input@,$configure_input,;t t
+s,@srcdir@,$ac_srcdir,;t t
+s,@abs_srcdir@,$ac_abs_srcdir,;t t
+s,@top_srcdir@,$ac_top_srcdir,;t t
+s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
+s,@builddir@,$ac_builddir,;t t
+s,@abs_builddir@,$ac_abs_builddir,;t t
+s,@top_builddir@,$ac_top_builddir,;t t
+s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
+s,@INSTALL@,$ac_INSTALL,;t t
+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
+  rm -f $tmp/stdin
+  if test x"$ac_file" != x-; then
+    mv $tmp/out $ac_file
+  else
+    cat $tmp/out
+    rm -f $tmp/out
+  fi
+
+done
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+{ (exit 0); exit 0; }
+_ACEOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || { (exit 1); exit 1; }
+fi
+
diff --git a/gnattools/configure.ac b/gnattools/configure.ac
new file mode 100644
index 0000000..31e7076
--- /dev/null
+++ b/gnattools/configure.ac
@@ -0,0 +1,163 @@
+# Configure script for libada.
+#   Copyright 2003, 2004 Free Software Foundation, Inc.
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+AC_INIT
+AC_PREREQ([2.59])
+
+AC_CONFIG_SRCDIR([Makefile.in])
+
+# Command-line options.
+# Very limited version of AC_MAINTAINER_MODE.
+AC_ARG_ENABLE([maintainer-mode],
+  [AC_HELP_STRING([--enable-maintainer-mode],
+                 [enable make rules and dependencies not useful (and
+                  sometimes confusing) to the casual installer])],
+  [case ${enable_maintainer_mode} in
+     yes) MAINT='' ;;
+     no) MAINT='#' ;;
+     *) AC_MSG_ERROR([--enable-maintainer-mode must be yes or no]) ;;
+   esac
+   maintainer_mode=${enableval}],
+  [MAINT='#'])
+AC_SUBST([MAINT])dnl
+
+# Start of actual configure tests
+
+AC_PROG_INSTALL
+
+AC_CANONICAL_BUILD
+AC_CANONICAL_HOST
+AC_CANONICAL_TARGET
+
+sinclude(../config/acx.m4)
+ACX_NONCANONICAL_TARGET
+
+# Need to pass this down for now :-P
+AC_PROG_LN_S
+
+# Determine x_ada_cflags
+case $host in
+  hppa*) x_ada_cflags=-mdisable-indexing ;;
+  *) x_ada_cflags= ;;
+esac
+AC_SUBST([x_ada_cflags])
+
+# Determine what to build for 'gnattools'
+if test $build = $target ; then
+  # Note that build=target is almost certainly the wrong test; FIXME
+  default_gnattools_target="gnattools-native"
+else
+  default_gnattools_target="gnattools-cross"
+fi
+AC_SUBST([default_gnattools_target])
+
+# Target-specific stuff (defaults)
+TOOLS_TARGET_PAIRS=
+AC_SUBST(TOOLS_TARGET_PAIRS)
+EXTRA_GNATTOOLS=
+AC_SUBST(EXTRA_GNATTOOLS)
+
+# Per-target case statement
+# -------------------------
+case "${target}" in
+  alpha*-dec-vx*) # Unlike all other Vxworks
+    ;;
+  m68k*-wrs-vx* \
+  | powerpc*-wrs-vxworks \
+  | sparc*-wrs-vx* \
+  | *86-wrs-vxworks \
+  | xscale*-wrs-vx* \
+  | xscale*-wrs-coff \
+  | mips*-wrs-vx*)
+    TOOLS_TARGET_PAIRS="mlib-tgt.adb<mlib-tgt-vxworks.adb"
+    ;;
+  sparc-sun-solaris*)
+    TOOLS_TARGET_PAIRS="mlib-tgt.adb<mlib-tgt-solaris.adb"
+    ;;
+  *86-*-solaris2*)
+    TOOLS_TARGET_PAIRS="mlib-tgt.adb<mlib-tgt-solaris.adb"
+    ;;
+  *86-*-linux* \
+  | powerpc*-*-linux*)
+    TOOLS_TARGET_PAIRS="\
+    mlib-tgt.adb<mlib-tgt-linux.adb \
+    indepsw.adb<indepsw-linux.adb"
+    ;;
+  *ia64-*-linux* \
+  | alpha*-*-linux )
+    TOOLS_TARGET_PAIRS="\
+    mlib-tgt.adb<mlib-tgt-linux.adb \
+    indepsw.adb<indepsw-linux.adb"
+    ;;
+  *x86_64-*-linux* \
+  | s390*-*-linux*)
+    TOOLS_TARGET_PAIRS="mlib-tgt.adb<mlib-tgt-linux.adb"
+    ;;
+  *86-*-freebsd*)
+    TOOLS_TARGET_PAIRS="\
+    mlib-tgt.adb<mlib-tgt-linux.adb"
+    ;;
+  mips-sgi-irix*)
+    TOOLS_TARGET_PAIRS="mlib-tgt.adb<mlib-tgt-irix.adb"
+    ;;
+  hppa*-hp-hpux10*) # Unlike hpux11
+    ;;
+  hppa*-hp-hpux11*)
+    TOOLS_TARGET_PAIRS="mlib-tgt.adb<mlib-tgt-hpux.adb"
+    ;;
+  *-ibm-aix*)
+    TOOLS_TARGET_PAIRS="\
+    mlib-tgt.adb<mlib-tgt-aix.adb \
+    indepsw.adb<indepsw-aix.adb"
+    ;;
+  alpha*-dec-osf*)
+    TOOLS_TARGET_PAIRS="mlib-tgt.adb<mlib-tgt-tru64.adb"
+    ;;
+  alpha*-dec-vms* | alpha*-dec-openvms* | alpha*-dec-vms* \
+  | alpha*-hp-vms* | alpha*-hp-openvms* | alpha*-hp-vms*)
+    TOOLS_TARGET_PAIRS="\
+    mlib-tgt.adb<mlib-tgt-vms-alpha.adb \
+    symbols.adb<symbols-vms-alpha.adb"
+
+    EXTRA_GNATTOOLS='../../gnatlbr$(exeext) ../../gnatsym$(exeext)'
+    ;;
+  ia64*-dec-vms* | ia64*-dec-openvms* | ia64*-dec-vms* \
+  | ia64*-hp-vms* | ia64*-hp-openvms* | ia64*-hp-vms*)
+    TOOLS_TARGET_PAIRS="\
+    mlib-tgt.adb<mlib-tgt-vms-ia64.adb \
+    symbols.adb<symbols-vms-ia64.adb"
+
+    EXTRA_GNATTOOLS='../../gnatlbr$(exeext) ../../gnatsym$(exeext)'
+    ;;
+  *-*-cygwin32* | *-*-mingw32* | *-*-pe)
+    TOOLS_TARGET_PAIRS="\
+    mlib-tgt.adb<mlib-tgt-mingw.adb \
+    indepsw.adb<indepsw-mingw.adb"
+    EXTRA_GNATTOOLS='../../gnatdll$(exeext)'
+    ;;
+  powerpc-*-darwin*)
+    TOOLS_TARGET_PAIRS="mlib-tgt.adb<mlib-tgt-darwin.adb"
+    ;;
+  *-*-lynxos)
+    TOOLS_TARGET_PAIRS="mlib-tgt.adb<mlib-tgt-lynxos.adb"
+    ;;
+esac
+
+# Output: create a Makefile.
+AC_CONFIG_FILES([Makefile])
+
+AC_OUTPUT