configure.in: Move check for V3 above check for C++ header-file directory.

	* configure.in: Move check for V3 above check for C++ header-file
	directory.
	* configure: Regenerated.

From-SVN: r37470

3 files changed, 281 insertions, 273 deletions

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index a510068..f016426 100644
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,3 +1,9 @@
+2000-11-14  Mark Mitchell  <mark@codesourcery.com>
+
+	* configure.in: Move check for V3 above check for C++ header-file
+	directory.
+	* configure: Regenerated.
+	
 2000-11-14  DJ Delorie  <dj@redhat.com>
 
 	* config/v850/v850.c: Remove obstacks.
diff --git a/gcc/configure b/gcc/configure
index 4bda960..f694044 100755
--- a/gcc/configure
+++ b/gcc/configure
@@ -26,6 +26,9 @@ ac_help="$ac_help
 ac_help="$ac_help
   --with-local-prefix=DIR specifies directory to put local include."
 ac_help="$ac_help
+  --enable-libstdcxx-v3 
+			  enable libstdc++-v3 for building and installation"
+ac_help="$ac_help
   --with-gxx-include-dir=DIR
                           specifies directory to put g++ header files."
 ac_help="$ac_help
@@ -82,9 +85,6 @@ ac_help="$ac_help
 			  at configuration time, so that the correct runtime
 			  support is built. You cannot mix ABIs."
 ac_help="$ac_help
-  --enable-libstdcxx-v3 
-			  enable libstdc++-v3 for building and installation"
-ac_help="$ac_help
   --enable-maintainer-mode enable make rules and dependencies not useful
                           (and sometimes confusing) to the casual installer"
 
@@ -752,6 +752,28 @@ if test x$local_prefix = x; then
 	local_prefix=/usr/local
 fi
 
+# Build a new-libstdc++ system (ie libstdc++-v3)
+echo $ac_n "checking for libstdc++ to install""... $ac_c" 1>&6
+echo "configure:758: checking for libstdc++ to install" >&5
+# Check whether --enable-libstdcxx-v3 or --disable-libstdcxx-v3 was given.
+if test "${enable_libstdcxx_v3+set}" = set; then
+  enableval="$enable_libstdcxx_v3"
+  enable_libstdcxx_v3="$enableval"
+else
+  enable_libstdcxx_v3=yes
+fi
+
+
+if test x$enable_libstdcxx_v3 = xyes; then
+  echo "$ac_t""v3" 1>&6
+  HAVE_LIBSTDCXX_V3=1
+  ac_esn=1
+else
+  echo "$ac_t""v2" 1>&6
+  HAVE_LIBSTDCXX_V3=0
+  ac_esn=0
+fi
+
 # Don't set gcc_gxx_include_dir to gxx_include_dir since that's only
 # passed in by the toplevel make and thus we'd get different behavior
 # depending on where we built the sources.
@@ -1008,7 +1030,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:1012: checking host system type" >&5
+echo "configure:1034: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -1029,7 +1051,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:1033: checking target system type" >&5
+echo "configure:1055: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -1047,7 +1069,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1051: checking build system type" >&5
+echo "configure:1073: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -1074,7 +1096,7 @@ test "$host_alias" != "$target_alias" &&
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1078: checking for $ac_word" >&5
+echo "configure:1100: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1104,7 +1126,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1108: checking for $ac_word" >&5
+echo "configure:1130: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1155,7 +1177,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1159: checking for $ac_word" >&5
+echo "configure:1181: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1187,7 +1209,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1191: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1213: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1198,12 +1220,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1202 "configure"
+#line 1224 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1207: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1229: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1229,12 +1251,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1233: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1255: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1238: checking whether we are using GNU C" >&5
+echo "configure:1260: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1243,7 +1265,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1247: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1269: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1262,7 +1284,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1266: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1288: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1295,10 +1317,10 @@ fi
 
 if test "x$CC" != xcc; then
   echo $ac_n "checking whether $CC and cc understand -c and -o together""... $ac_c" 1>&6
-echo "configure:1299: checking whether $CC and cc understand -c and -o together" >&5
+echo "configure:1321: checking whether $CC and cc understand -c and -o together" >&5
 else
   echo $ac_n "checking whether cc understands -c and -o together""... $ac_c" 1>&6
-echo "configure:1302: checking whether cc understands -c and -o together" >&5
+echo "configure:1324: checking whether cc understands -c and -o together" >&5
 fi
 set dummy $CC; ac_cc="`echo $2 |
 		       sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`"
@@ -1310,16 +1332,16 @@ else
 # We do the test twice because some compilers refuse to overwrite an
 # existing .o file with -o, though they will create one.
 ac_try='${CC-cc} -c conftest.c -o conftest.o 1>&5'
-if { (eval echo configure:1314: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
-   test -f conftest.o && { (eval echo configure:1315: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+if { (eval echo configure:1336: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+   test -f conftest.o && { (eval echo configure:1337: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
 then
   eval ac_cv_prog_cc_${ac_cc}_c_o=yes
   if test "x$CC" != xcc; then
     # Test first that cc exists at all.
-    if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1320: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+    if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1342: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
       ac_try='cc -c conftest.c -o conftest.o 1>&5'
-      if { (eval echo configure:1322: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
-	 test -f conftest.o && { (eval echo configure:1323: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+      if { (eval echo configure:1344: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+	 test -f conftest.o && { (eval echo configure:1345: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
       then
         # cc works too.
         :
@@ -1355,7 +1377,7 @@ fi
 
 
 echo $ac_n "checking for long double""... $ac_c" 1>&6
-echo "configure:1359: checking for long double" >&5
+echo "configure:1381: checking for long double" >&5
 if eval "test \"`echo '$''{'gcc_cv_c_long_double'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1363,7 +1385,7 @@ else
   gcc_cv_c_long_double=yes
 else
 cat > conftest.$ac_ext <<EOF
-#line 1367 "configure"
+#line 1389 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -1373,7 +1395,7 @@ long double foo = 0.0;
 switch (0) case 0: case (sizeof(long double) >= sizeof(double)):;
 ; return 0; }
 EOF
-if { (eval echo configure:1377: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1399: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_c_long_double=yes
 else
@@ -1396,21 +1418,21 @@ fi
 
 
 echo $ac_n "checking whether ${CC-cc} accepts -Wno-long-long""... $ac_c" 1>&6
-echo "configure:1400: checking whether ${CC-cc} accepts -Wno-long-long" >&5
+echo "configure:1422: checking whether ${CC-cc} accepts -Wno-long-long" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_no_long_long'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   save_CFLAGS="$CFLAGS"
 CFLAGS="-Wno-long-long"
 cat > conftest.$ac_ext <<EOF
-#line 1407 "configure"
+#line 1429 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:1414: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1436: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_prog_cc_no_long_long=yes
 else
@@ -1454,7 +1476,7 @@ esac
 
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1458: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1480: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1482,7 +1504,7 @@ fi
 
 
 echo $ac_n "checking whether a default assembler was specified""... $ac_c" 1>&6
-echo "configure:1486: checking whether a default assembler was specified" >&5
+echo "configure:1508: checking whether a default assembler was specified" >&5
 if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
     if test x"$gas_flag" = x"no"; then
     	echo "$ac_t""yes ($DEFAULT_ASSEMBLER)" 1>&6
@@ -1494,7 +1516,7 @@ else
 fi
 
 echo $ac_n "checking whether a default linker was specified""... $ac_c" 1>&6
-echo "configure:1498: checking whether a default linker was specified" >&5
+echo "configure:1520: checking whether a default linker was specified" >&5
 if test x"${DEFAULT_LINKER+set}" = x"set"; then
     if test x"$gnu_ld_flag" = x"no"; then
 	echo "$ac_t""yes ($DEFAULT_LINKER)" 1>&6
@@ -1506,12 +1528,12 @@ else
 fi
 
 echo $ac_n "checking for GNU C library""... $ac_c" 1>&6
-echo "configure:1510: checking for GNU C library" >&5
+echo "configure:1532: checking for GNU C library" >&5
 if eval "test \"`echo '$''{'gcc_cv_glibc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1515 "configure"
+#line 1537 "configure"
 #include "confdefs.h"
 #include <features.h>
 int main() {
@@ -1521,7 +1543,7 @@ int main() {
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:1525: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1547: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_glibc=yes
 else
@@ -1542,21 +1564,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1546: checking for inline" >&5
+echo "configure:1568: checking for inline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 1553 "configure"
+#line 1575 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:1560: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1582: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -1583,12 +1605,12 @@ esac
 
 
 # Find some useful tools
-for ac_prog in mawk gawk nawk awk
+for ac_prog in gawk mawk nawk awk
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1592: checking for $ac_word" >&5
+echo "configure:1614: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1618,7 +1640,7 @@ test -n "$AWK" && break
 done
 
 echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:1622: checking whether ln works" >&5
+echo "configure:1644: checking whether ln works" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_LN'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1650,7 +1672,7 @@ else
 fi
 
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1654: checking whether ln -s works" >&5
+echo "configure:1676: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1682,19 +1704,19 @@ else
 fi
 
 echo $ac_n "checking for volatile""... $ac_c" 1>&6
-echo "configure:1686: checking for volatile" >&5
+echo "configure:1708: checking for volatile" >&5
 if eval "test \"`echo '$''{'gcc_cv_c_volatile'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1691 "configure"
+#line 1713 "configure"
 #include "confdefs.h"
 
 int main() {
 volatile int foo;
 ; return 0; }
 EOF
-if { (eval echo configure:1698: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1720: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_c_volatile=yes
 else
@@ -1717,7 +1739,7 @@ fi
 # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1721: checking for $ac_word" >&5
+echo "configure:1743: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1755,7 +1777,7 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1759: checking for a BSD compatible install" >&5
+echo "configure:1781: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1806,7 +1828,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1810: checking how to run the C preprocessor" >&5
+echo "configure:1832: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -1821,13 +1843,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 1825 "configure"
+#line 1847 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1831: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1853: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1838,13 +1860,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 1842 "configure"
+#line 1864 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1848: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1870: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1855,13 +1877,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 1859 "configure"
+#line 1881 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1865: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1887: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1886,12 +1908,12 @@ fi
 echo "$ac_t""$CPP" 1>&6
 
 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1890: checking for ANSI C header files" >&5
+echo "configure:1912: checking for ANSI C header files" >&5
 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1895 "configure"
+#line 1917 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
@@ -1899,7 +1921,7 @@ else
 #include <float.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1903: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1925: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1916,7 +1938,7 @@ rm -f conftest*
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 1920 "configure"
+#line 1942 "configure"
 #include "confdefs.h"
 #include <string.h>
 EOF
@@ -1934,7 +1956,7 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 1938 "configure"
+#line 1960 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
@@ -1955,7 +1977,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 1959 "configure"
+#line 1981 "configure"
 #include "confdefs.h"
 #include <ctype.h>
 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -1966,7 +1988,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
 exit (0); }
 
 EOF
-if { (eval echo configure:1970: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1992: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -1990,12 +2012,12 @@ EOF
 fi
 
 echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:1994: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:2016: checking whether time.h and sys/time.h may both be included" >&5
 if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1999 "configure"
+#line 2021 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/time.h>
@@ -2004,7 +2026,7 @@ int main() {
 struct tm *tp;
 ; return 0; }
 EOF
-if { (eval echo configure:2008: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2030: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_header_time=yes
 else
@@ -2025,12 +2047,12 @@ EOF
 fi
 
 echo $ac_n "checking whether string.h and strings.h may both be included""... $ac_c" 1>&6
-echo "configure:2029: checking whether string.h and strings.h may both be included" >&5
+echo "configure:2051: checking whether string.h and strings.h may both be included" >&5
 if eval "test \"`echo '$''{'gcc_cv_header_string'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2034 "configure"
+#line 2056 "configure"
 #include "confdefs.h"
 #include <string.h>
 #include <strings.h>
@@ -2038,7 +2060,7 @@ int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:2042: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2064: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_header_string=yes
 else
@@ -2059,12 +2081,12 @@ EOF
 fi
 
 echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:2063: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:2085: checking for sys/wait.h that is POSIX.1 compatible" >&5
 if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2068 "configure"
+#line 2090 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/wait.h>
@@ -2080,7 +2102,7 @@ wait (&s);
 s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
 ; return 0; }
 EOF
-if { (eval echo configure:2084: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2106: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_header_sys_wait_h=yes
 else
@@ -2107,17 +2129,17 @@ for ac_hdr in limits.h stddef.h string.h strings.h stdlib.h time.h \
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2111: checking for $ac_hdr" >&5
+echo "configure:2133: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2116 "configure"
+#line 2138 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2121: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2143: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2147,17 +2169,17 @@ done
 # Check for thread headers.
 ac_safe=`echo "thread.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for thread.h""... $ac_c" 1>&6
-echo "configure:2151: checking for thread.h" >&5
+echo "configure:2173: checking for thread.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2156 "configure"
+#line 2178 "configure"
 #include "confdefs.h"
 #include <thread.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2161: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2183: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2181,17 +2203,17 @@ fi
 
 ac_safe=`echo "pthread.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for pthread.h""... $ac_c" 1>&6
-echo "configure:2185: checking for pthread.h" >&5
+echo "configure:2207: checking for pthread.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2190 "configure"
+#line 2212 "configure"
 #include "confdefs.h"
 #include <pthread.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2195: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2217: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2218,7 +2240,7 @@ fi
 # Extract the first word of "gnatbind", so it can be a program name with args.
 set dummy gnatbind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2222: checking for $ac_word" >&5
+echo "configure:2244: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gnat'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2257,7 +2279,7 @@ else
   # Extract the first word of "makeinfo", so it can be a program name with args.
 set dummy makeinfo; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2261: checking for $ac_word" >&5
+echo "configure:2283: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2286,13 +2308,13 @@ fi
 if test -n "$MAKEINFO"; then
   # Found it, now check the version.
   echo $ac_n "checking for modern makeinfo""... $ac_c" 1>&6
-echo "configure:2290: checking for modern makeinfo" >&5
+echo "configure:2312: checking for modern makeinfo" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_makeinfo_modern'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
     ac_prog_version=`$MAKEINFO --version 2>&1 |
                    sed -n 's/^.*GNU texinfo.* \([0-9][0-9.]*\).*$/\1/p'`
-  echo "configure:2296: version of makeinfo is $ac_prog_version" >&5
+  echo "configure:2318: version of makeinfo is $ac_prog_version" >&5
   case $ac_prog_version in
     '')     gcc_cv_prog_makeinfo_modern=no;;
     3.1[2-9] | 3.[2-9][0-9] | 4.* | 1.6[89] | 1.7[0-9])
@@ -2327,7 +2349,7 @@ else
   # Extract the first word of "flex", so it can be a program name with args.
 set dummy flex; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2331: checking for $ac_word" >&5
+echo "configure:2353: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2364,7 +2386,7 @@ else
   # Extract the first word of "bison", so it can be a program name with args.
 set dummy bison; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2368: checking for $ac_word" >&5
+echo "configure:2390: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2398,12 +2420,12 @@ fi
 
 
 echo $ac_n "checking for preprocessor stringizing operator""... $ac_c" 1>&6
-echo "configure:2402: checking for preprocessor stringizing operator" >&5
+echo "configure:2424: checking for preprocessor stringizing operator" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stringize'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2407 "configure"
+#line 2429 "configure"
 #include "confdefs.h"
 
 #define x(y) #y
@@ -2436,12 +2458,12 @@ echo "$ac_t""${ac_cv_c_stringize}" 1>&6
 # Use <inttypes.h> only if it exists,
 # doesn't clash with <sys/types.h>, and declares intmax_t.
 echo $ac_n "checking for inttypes.h""... $ac_c" 1>&6
-echo "configure:2440: checking for inttypes.h" >&5
+echo "configure:2462: checking for inttypes.h" >&5
 if eval "test \"`echo '$''{'gcc_cv_header_inttypes_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2445 "configure"
+#line 2467 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <inttypes.h>
@@ -2449,7 +2471,7 @@ int main() {
 intmax_t i = -1;
 ; return 0; }
 EOF
-if { (eval echo configure:2453: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2475: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_header_inttypes_h=yes
 else
@@ -2474,7 +2496,7 @@ fi
 # be either signed or unsigned.
 #
 echo $ac_n "checking for unsigned enumerated bitfields""... $ac_c" 1>&6
-echo "configure:2478: checking for unsigned enumerated bitfields" >&5
+echo "configure:2500: checking for unsigned enumerated bitfields" >&5
 if eval "test \"`echo '$''{'gcc_cv_enum_bf_unsigned'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2482,7 +2504,7 @@ else
   gcc_cv_enum_bf_unsigned=yes
 else
   cat > conftest.$ac_ext <<EOF
-#line 2486 "configure"
+#line 2508 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 enum t { BLAH = 128 } ;
@@ -2495,7 +2517,7 @@ int main(void)
 
 }
 EOF
-if { (eval echo configure:2499: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2521: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   gcc_cv_enum_bf_unsigned=yes
 else
@@ -2523,12 +2545,12 @@ for ac_func in strtoul bsearch putenv popen bcopy \
 	fputs_unlocked getrusage valloc iconv nl_langinfo
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2527: checking for $ac_func" >&5
+echo "configure:2549: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2532 "configure"
+#line 2554 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2551,7 +2573,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2555: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2577: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2577,12 +2599,12 @@ done
 
 
 echo $ac_n "checking for ssize_t""... $ac_c" 1>&6
-echo "configure:2581: checking for ssize_t" >&5
+echo "configure:2603: checking for ssize_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2586 "configure"
+#line 2608 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -2613,12 +2635,12 @@ fi
 # Try to determine the array type of the second argument of getgroups
 # for the target system (int or gid_t).
 echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:2617: checking for uid_t in sys/types.h" >&5
+echo "configure:2639: checking for uid_t in sys/types.h" >&5
 if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2622 "configure"
+#line 2644 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 EOF
@@ -2647,7 +2669,7 @@ EOF
 fi
 
 echo $ac_n "checking type of array argument to getgroups""... $ac_c" 1>&6
-echo "configure:2651: checking type of array argument to getgroups" >&5
+echo "configure:2673: checking type of array argument to getgroups" >&5
 if eval "test \"`echo '$''{'ac_cv_type_getgroups'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2655,7 +2677,7 @@ else
   ac_cv_type_getgroups=cross
 else
   cat > conftest.$ac_ext <<EOF
-#line 2659 "configure"
+#line 2681 "configure"
 #include "confdefs.h"
 
 /* Thanks to Mike Rendell for this test.  */
@@ -2680,7 +2702,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:2684: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2706: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
     ac_cv_type_getgroups=gid_t
 else
@@ -2694,7 +2716,7 @@ fi
 
 if test $ac_cv_type_getgroups = cross; then
         cat > conftest.$ac_ext <<EOF
-#line 2698 "configure"
+#line 2720 "configure"
 #include "confdefs.h"
 #include <unistd.h>
 EOF
@@ -2735,12 +2757,12 @@ fi
 
 
 echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:2739: checking for vprintf" >&5
+echo "configure:2761: checking for vprintf" >&5
 if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2744 "configure"
+#line 2766 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char vprintf(); below.  */
@@ -2763,7 +2785,7 @@ vprintf();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2767: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2789: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_vprintf=yes"
 else
@@ -2787,12 +2809,12 @@ fi
 
 if test "$ac_cv_func_vprintf" != yes; then
 echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:2791: checking for _doprnt" >&5
+echo "configure:2813: checking for _doprnt" >&5
 if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2796 "configure"
+#line 2818 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char _doprnt(); below.  */
@@ -2815,7 +2837,7 @@ _doprnt();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2819: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2841: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func__doprnt=yes"
 else
@@ -2851,7 +2873,7 @@ fi
 
 
 echo $ac_n "checking whether the printf functions support %p""... $ac_c" 1>&6
-echo "configure:2855: checking whether the printf functions support %p" >&5
+echo "configure:2877: checking whether the printf functions support %p" >&5
 if eval "test \"`echo '$''{'gcc_cv_func_printf_ptr'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2859,7 +2881,7 @@ else
   gcc_cv_func_printf_ptr=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 2863 "configure"
+#line 2885 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 
@@ -2872,7 +2894,7 @@ int main()
   return (p != q);
 }
 EOF
-if { (eval echo configure:2876: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2898: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   gcc_cv_func_printf_ptr=yes
 else
@@ -2905,12 +2927,12 @@ case "${host}" in
   ;;
 esac
 echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:2909: checking for pid_t" >&5
+echo "configure:2931: checking for pid_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2914 "configure"
+#line 2936 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -2939,17 +2961,17 @@ fi
 
 ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:2943: checking for vfork.h" >&5
+echo "configure:2965: checking for vfork.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2948 "configure"
+#line 2970 "configure"
 #include "confdefs.h"
 #include <vfork.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2953: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2975: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2974,18 +2996,18 @@ else
 fi
 
 echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:2978: checking for working vfork" >&5
+echo "configure:3000: checking for working vfork" >&5
 if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test "$cross_compiling" = yes; then
   echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:2984: checking for vfork" >&5
+echo "configure:3006: checking for vfork" >&5
 if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2989 "configure"
+#line 3011 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char vfork(); below.  */
@@ -3008,7 +3030,7 @@ vfork();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3012: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3034: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_vfork=yes"
 else
@@ -3030,7 +3052,7 @@ fi
 ac_cv_func_vfork_works=$ac_cv_func_vfork
 else
   cat > conftest.$ac_ext <<EOF
-#line 3034 "configure"
+#line 3056 "configure"
 #include "confdefs.h"
 /* Thanks to Paul Eggert for this test.  */
 #include <stdio.h>
@@ -3125,7 +3147,7 @@ main() {
   }
 }
 EOF
-if { (eval echo configure:3129: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3151: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_vfork_works=yes
 else
@@ -3151,17 +3173,17 @@ for ac_hdr in unistd.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3155: checking for $ac_hdr" >&5
+echo "configure:3177: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3160 "configure"
+#line 3182 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3165: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3187: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3190,12 +3212,12 @@ done
 for ac_func in getpagesize
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3194: checking for $ac_func" >&5
+echo "configure:3216: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3199 "configure"
+#line 3221 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3218,7 +3240,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3222: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3244: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3243,7 +3265,7 @@ fi
 done
 
 echo $ac_n "checking for working mmap which provides zeroed pages anywhere""... $ac_c" 1>&6
-echo "configure:3247: checking for working mmap which provides zeroed pages anywhere" >&5
+echo "configure:3269: checking for working mmap which provides zeroed pages anywhere" >&5
 if eval "test \"`echo '$''{'ac_cv_func_mmap_anywhere'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3251,7 +3273,7 @@ else
   ac_cv_func_mmap_anywhere=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 3255 "configure"
+#line 3277 "configure"
 #include "confdefs.h"
 
 /* Test by Richard Henderson and Alexandre Oliva.
@@ -3334,7 +3356,7 @@ int main()
   exit(0);
 }
 EOF
-if { (eval echo configure:3338: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3360: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_anywhere=yes
 else
@@ -3357,7 +3379,7 @@ EOF
 fi
 
 echo $ac_n "checking for working mmap of a file""... $ac_c" 1>&6
-echo "configure:3361: checking for working mmap of a file" >&5
+echo "configure:3383: checking for working mmap of a file" >&5
 if eval "test \"`echo '$''{'ac_cv_func_mmap_file'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3372,7 +3394,7 @@ if test "$cross_compiling" = yes; then
   ac_cv_func_mmap_file=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 3376 "configure"
+#line 3398 "configure"
 #include "confdefs.h"
 
 /* Test by Zack Weinberg.  Modified from MMAP_ANYWHERE test by
@@ -3409,7 +3431,7 @@ int main()
   exit(0);
 }
 EOF
-if { (eval echo configure:3413: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3435: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_file=yes
 else
@@ -3442,12 +3464,12 @@ for ac_func in bcopy \
 do
   ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
 echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:3446: checking whether $ac_func is declared" >&5
+echo "configure:3468: checking whether $ac_func is declared" >&5
 if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3451 "configure"
+#line 3473 "configure"
 #include "confdefs.h"
 #include "gansidecl.h"
 #include "system.h"
@@ -3458,7 +3480,7 @@ char *(*pfn) = (char *(*)) $ac_func ;
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:3462: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3484: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "gcc_cv_have_decl_$ac_func=yes"
 else
@@ -3551,12 +3573,12 @@ for ac_func in getrlimit setrlimit getrusage
 do
   ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
 echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:3555: checking whether $ac_func is declared" >&5
+echo "configure:3577: checking whether $ac_func is declared" >&5
 if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3560 "configure"
+#line 3582 "configure"
 #include "confdefs.h"
 #include "gansidecl.h"
 #include "system.h"
@@ -3571,7 +3593,7 @@ char *(*pfn) = (char *(*)) $ac_func ;
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:3575: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3597: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "gcc_cv_have_decl_$ac_func=yes"
 else
@@ -3614,12 +3636,12 @@ CFLAGS="$saved_CFLAGS"
 
 # mkdir takes a single argument on some systems. 
 echo $ac_n "checking if mkdir takes one argument""... $ac_c" 1>&6
-echo "configure:3618: checking if mkdir takes one argument" >&5
+echo "configure:3640: checking if mkdir takes one argument" >&5
 if eval "test \"`echo '$''{'gcc_cv_mkdir_takes_one_arg'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3623 "configure"
+#line 3645 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -3636,7 +3658,7 @@ int main() {
 mkdir ("foo", 0);
 ; return 0; }
 EOF
-if { (eval echo configure:3640: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3662: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_mkdir_takes_one_arg=no
 else
@@ -7180,7 +7202,7 @@ fi
 
 
         echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
-echo "configure:7184: checking for strerror in -lcposix" >&5
+echo "configure:7206: checking for strerror in -lcposix" >&5
 ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -7188,7 +7210,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lcposix  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 7192 "configure"
+#line 7214 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -7199,7 +7221,7 @@ int main() {
 strerror()
 ; return 0; }
 EOF
-if { (eval echo configure:7203: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7225: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -7222,12 +7244,12 @@ fi
   
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:7226: checking for working const" >&5
+echo "configure:7248: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7231 "configure"
+#line 7253 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -7276,7 +7298,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:7280: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:7302: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -7297,12 +7319,12 @@ EOF
 fi
 
 echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:7301: checking for off_t" >&5
+echo "configure:7323: checking for off_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7306 "configure"
+#line 7328 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -7330,12 +7352,12 @@ EOF
 fi
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:7334: checking for size_t" >&5
+echo "configure:7356: checking for size_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7339 "configure"
+#line 7361 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -7365,19 +7387,19 @@ fi
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:7369: checking for working alloca.h" >&5
+echo "configure:7391: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7374 "configure"
+#line 7396 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:7381: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7403: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -7398,12 +7420,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:7402: checking for alloca" >&5
+echo "configure:7424: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7407 "configure"
+#line 7429 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -7431,7 +7453,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:7435: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7457: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -7463,12 +7485,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:7467: checking whether alloca needs Cray hooks" >&5
+echo "configure:7489: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7472 "configure"
+#line 7494 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -7493,12 +7515,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7497: checking for $ac_func" >&5
+echo "configure:7519: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7502 "configure"
+#line 7524 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -7521,7 +7543,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:7525: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7547: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -7548,7 +7570,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:7552: checking stack direction for C alloca" >&5
+echo "configure:7574: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7556,7 +7578,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 7560 "configure"
+#line 7582 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -7575,7 +7597,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:7579: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:7601: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -7602,17 +7624,17 @@ unistd.h sys/param.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:7606: checking for $ac_hdr" >&5
+echo "configure:7628: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7611 "configure"
+#line 7633 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7616: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7638: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -7642,12 +7664,12 @@ done
 strdup __argz_count __argz_stringify __argz_next
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7646: checking for $ac_func" >&5
+echo "configure:7668: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7651 "configure"
+#line 7673 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -7670,7 +7692,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:7674: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7696: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -7699,12 +7721,12 @@ done
      for ac_func in stpcpy
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7703: checking for $ac_func" >&5
+echo "configure:7725: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7708 "configure"
+#line 7730 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -7727,7 +7749,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:7731: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7753: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -7761,19 +7783,19 @@ EOF
 
    if test $ac_cv_header_locale_h = yes; then
     echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:7765: checking for LC_MESSAGES" >&5
+echo "configure:7787: checking for LC_MESSAGES" >&5
 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7770 "configure"
+#line 7792 "configure"
 #include "confdefs.h"
 #include <locale.h>
 int main() {
 return LC_MESSAGES
 ; return 0; }
 EOF
-if { (eval echo configure:7777: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7799: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_val_LC_MESSAGES=yes
 else
@@ -7794,7 +7816,7 @@ EOF
     fi
   fi
    echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:7798: checking whether NLS is requested" >&5
+echo "configure:7820: checking whether NLS is requested" >&5
         # Check whether --enable-nls or --disable-nls was given.
 if test "${enable_nls+set}" = set; then
   enableval="$enable_nls"
@@ -7814,7 +7836,7 @@ fi
 EOF
 
       echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:7818: checking whether included gettext is requested" >&5
+echo "configure:7840: checking whether included gettext is requested" >&5
       # Check whether --with-included-gettext or --without-included-gettext was given.
 if test "${with_included_gettext+set}" = set; then
   withval="$with_included_gettext"
@@ -7833,17 +7855,17 @@ fi
 
 	ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:7837: checking for libintl.h" >&5
+echo "configure:7859: checking for libintl.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7842 "configure"
+#line 7864 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7847: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7869: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -7860,19 +7882,19 @@ fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:7864: checking for gettext in libc" >&5
+echo "configure:7886: checking for gettext in libc" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7869 "configure"
+#line 7891 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:7876: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7898: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libc=yes
 else
@@ -7888,7 +7910,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
 
 	   if test "$gt_cv_func_gettext_libc" != "yes"; then
 	     echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:7892: checking for bindtextdomain in -lintl" >&5
+echo "configure:7914: checking for bindtextdomain in -lintl" >&5
 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -7896,7 +7918,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 7900 "configure"
+#line 7922 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -7907,7 +7929,7 @@ int main() {
 bindtextdomain()
 ; return 0; }
 EOF
-if { (eval echo configure:7911: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7933: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -7923,12 +7945,12 @@ fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:7927: checking for gettext in libintl" >&5
+echo "configure:7949: checking for gettext in libintl" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6
-echo "configure:7932: checking for gettext in -lintl" >&5
+echo "configure:7954: checking for gettext in -lintl" >&5
 ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -7936,7 +7958,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 7940 "configure"
+#line 7962 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -7947,7 +7969,7 @@ int main() {
 gettext()
 ; return 0; }
 EOF
-if { (eval echo configure:7951: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7973: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -7986,7 +8008,7 @@ EOF
 	      # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7990: checking for $ac_word" >&5
+echo "configure:8012: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'gcc_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8020,12 +8042,12 @@ fi
 		for ac_func in dcgettext
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:8024: checking for $ac_func" >&5
+echo "configure:8046: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 8029 "configure"
+#line 8051 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -8048,7 +8070,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:8052: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8074: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -8075,7 +8097,7 @@ done
 		# Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8079: checking for $ac_word" >&5
+echo "configure:8101: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8111,7 +8133,7 @@ fi
 		# Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8115: checking for $ac_word" >&5
+echo "configure:8137: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8143,7 +8165,7 @@ else
 fi
 
 		cat > conftest.$ac_ext <<EOF
-#line 8147 "configure"
+#line 8169 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -8151,7 +8173,7 @@ extern int _nl_msg_cat_cntr;
 			       return _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:8155: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8177: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   CATOBJEXT=.gmo
 		   DATADIRNAME=share
@@ -8176,7 +8198,7 @@ fi
 
         if test "$CATOBJEXT" = "NONE"; then
 	  echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
-echo "configure:8180: checking whether catgets can be used" >&5
+echo "configure:8202: checking whether catgets can be used" >&5
 	  # Check whether --with-catgets or --without-catgets was given.
 if test "${with_catgets+set}" = set; then
   withval="$with_catgets"
@@ -8189,7 +8211,7 @@ fi
 
 	  if test "$nls_cv_use_catgets" = "yes"; then
 	    	    echo $ac_n "checking for main in -li""... $ac_c" 1>&6
-echo "configure:8193: checking for main in -li" >&5
+echo "configure:8215: checking for main in -li" >&5
 ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -8197,14 +8219,14 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-li  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 8201 "configure"
+#line 8223 "configure"
 #include "confdefs.h"
 
 int main() {
 main()
 ; return 0; }
 EOF
-if { (eval echo configure:8208: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8230: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -8232,12 +8254,12 @@ else
 fi
 
 	    echo $ac_n "checking for catgets""... $ac_c" 1>&6
-echo "configure:8236: checking for catgets" >&5
+echo "configure:8258: checking for catgets" >&5
 if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 8241 "configure"
+#line 8263 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char catgets(); below.  */
@@ -8260,7 +8282,7 @@ catgets();
 
 ; return 0; }
 EOF
-if { (eval echo configure:8264: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8286: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_catgets=yes"
 else
@@ -8282,7 +8304,7 @@ EOF
 	       # Extract the first word of "gencat", so it can be a program name with args.
 set dummy gencat; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8286: checking for $ac_word" >&5
+echo "configure:8308: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'gcc_cv_path_GENCAT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8318,7 +8340,7 @@ fi
 		 # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8322: checking for $ac_word" >&5
+echo "configure:8344: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8355,7 +8377,7 @@ fi
 		   # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8359: checking for $ac_word" >&5
+echo "configure:8381: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8393,7 +8415,7 @@ fi
 		 # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8397: checking for $ac_word" >&5
+echo "configure:8419: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8451,7 +8473,7 @@ fi
         # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8455: checking for $ac_word" >&5
+echo "configure:8477: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'gcc_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8485,7 +8507,7 @@ fi
         # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8489: checking for $ac_word" >&5
+echo "configure:8511: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8524,7 +8546,7 @@ fi
         # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8528: checking for $ac_word" >&5
+echo "configure:8550: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8623,7 +8645,7 @@ fi
        LINGUAS=
      else
        echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:8627: checking for catalogs to be installed" >&5
+echo "configure:8649: checking for catalogs to be installed" >&5
        if test "x$LINGUAS" = "x"; then
 	 LINGUAS=$ALL_LINGUAS
        else
@@ -8655,17 +8677,17 @@ echo "configure:8627: checking for catalogs to be installed" >&5
    if test "$CATOBJEXT" = ".cat"; then
      ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:8659: checking for linux/version.h" >&5
+echo "configure:8681: checking for linux/version.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 8664 "configure"
+#line 8686 "configure"
 #include "confdefs.h"
 #include <linux/version.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8669: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8691: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -8740,7 +8762,7 @@ fi
 
 
 echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6
-echo "configure:8744: checking whether windows registry support is requested" >&5
+echo "configure:8766: checking whether windows registry support is requested" >&5
 if test x$enable_win32_registry != xno; then
   cat >> confdefs.h <<\EOF
 #define ENABLE_WIN32_REGISTRY 1
@@ -8769,7 +8791,7 @@ esac
 
 if test x$enable_win32_registry != xno; then
   echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6
-echo "configure:8773: checking registry key on windows hosts" >&5
+echo "configure:8795: checking registry key on windows hosts" >&5
   cat >> confdefs.h <<EOF
 #define WIN32_REGISTRY_KEY "$gcc_cv_win32_registry_key"
 EOF
@@ -8963,7 +8985,7 @@ fi
 
 # Figure out what assembler we will be using.
 echo $ac_n "checking what assembler to use""... $ac_c" 1>&6
-echo "configure:8967: checking what assembler to use" >&5
+echo "configure:8989: checking what assembler to use" >&5
 gcc_cv_as=
 gcc_cv_gas_major_version=
 gcc_cv_gas_minor_version=
@@ -9048,7 +9070,7 @@ fi
 
 # Figure out what nm we will be using.
 echo $ac_n "checking what nm to use""... $ac_c" 1>&6
-echo "configure:9052: checking what nm to use" >&5
+echo "configure:9074: checking what nm to use" >&5
 if test -x nm$host_exeext; then
 	gcc_cv_nm=./nm$host_exeext
 elif test x$host = x$target; then
@@ -9059,7 +9081,7 @@ echo "$ac_t""$gcc_cv_nm" 1>&6
 
 # Figure out what assembler alignment features are present.
 echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:9063: checking assembler alignment features" >&5
+echo "configure:9085: checking assembler alignment features" >&5
 gcc_cv_as_alignment_features=
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
 	# Gas version 2.6 and later support for .balign and .p2align.
@@ -9107,7 +9129,7 @@ fi
 echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
 
 echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:9111: checking assembler subsection support" >&5
+echo "configure:9133: checking assembler subsection support" >&5
 gcc_cv_as_subsections=
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
   if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
@@ -9147,7 +9169,7 @@ fi
 echo "$ac_t""$gcc_cv_as_subsections" 1>&6
 
 echo $ac_n "checking assembler weak support""... $ac_c" 1>&6
-echo "configure:9151: checking assembler weak support" >&5
+echo "configure:9173: checking assembler weak support" >&5
 gcc_cv_as_weak=
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
   if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 2 -o "$gcc_cv_gas_major_version" -gt 2; then
@@ -9170,7 +9192,7 @@ fi
 echo "$ac_t""$gcc_cv_as_weak" 1>&6
 
 echo $ac_n "checking assembler hidden support""... $ac_c" 1>&6
-echo "configure:9174: checking assembler hidden support" >&5
+echo "configure:9196: checking assembler hidden support" >&5
 gcc_cv_as_hidden=
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
   if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 10 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
@@ -9196,7 +9218,7 @@ echo "$ac_t""$gcc_cv_as_hidden" 1>&6
 case "$target" in 
   sparc*-*-*)
     echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
-echo "configure:9200: checking assembler .register pseudo-op support" >&5
+echo "configure:9222: checking assembler .register pseudo-op support" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_register_pseudo_op'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9224,7 +9246,7 @@ EOF
     fi
 
     echo $ac_n "checking assembler supports -relax""... $ac_c" 1>&6
-echo "configure:9228: checking assembler supports -relax" >&5
+echo "configure:9250: checking assembler supports -relax" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_relax_opt'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9254,7 +9276,7 @@ EOF
     case "$tm_file" in
     *64*)
 	echo $ac_n "checking for 64 bit support in assembler ($gcc_cv_as)""... $ac_c" 1>&6
-echo "configure:9258: checking for 64 bit support in assembler ($gcc_cv_as)" >&5
+echo "configure:9280: checking for 64 bit support in assembler ($gcc_cv_as)" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_flags64'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9299,7 +9321,7 @@ EOF
 
     if test "x$gcc_cv_as_flags64" != xno; then
 	echo $ac_n "checking for assembler offsetable %lo() support""... $ac_c" 1>&6
-echo "configure:9303: checking for assembler offsetable %lo() support" >&5
+echo "configure:9325: checking for assembler offsetable %lo() support" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_offsetable_lo10'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9338,7 +9360,7 @@ EOF
 
   i[34567]86-*-*)
     echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
-echo "configure:9342: checking assembler instructions" >&5
+echo "configure:9364: checking assembler instructions" >&5
     gcc_cv_as_instructions=
     if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
       if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2; then
@@ -9486,27 +9508,6 @@ fi
 
 
 
-# Build a new-libstdc++ system (ie libstdc++-v3)
-echo $ac_n "checking for libstdc++ to install""... $ac_c" 1>&6
-echo "configure:9492: checking for libstdc++ to install" >&5
-# Check whether --enable-libstdcxx-v3 or --disable-libstdcxx-v3 was given.
-if test "${enable_libstdcxx_v3+set}" = set; then
-  enableval="$enable_libstdcxx_v3"
-  enable_libstdcxx_v3="$enableval"
-else
-  enable_libstdcxx_v3=yes
-fi
-
-
-if test x$enable_libstdcxx_v3 = xyes; then
-  echo "$ac_t""v3" 1>&6
-  HAVE_LIBSTDCXX_V3=1
-  ac_esn=1
-else
-  echo "$ac_t""v2" 1>&6
-  HAVE_LIBSTDCXX_V3=0
-  ac_esn=0
-fi
 cat >> confdefs.h <<EOF
 #define ENABLE_STD_NAMESPACE $ac_esn
 EOF
@@ -9515,7 +9516,7 @@ EOF
 
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:9519: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:9520: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
diff --git a/gcc/configure.in b/gcc/configure.in
index 9a62f5b..3af0f44 100644
--- a/gcc/configure.in
+++ b/gcc/configure.in
@@ -151,6 +151,23 @@ if test x$local_prefix = x; then
 	local_prefix=/usr/local
 fi
 
+# Build a new-libstdc++ system (ie libstdc++-v3)
+AC_MSG_CHECKING([for libstdc++ to install])
+AC_ARG_ENABLE(libstdcxx-v3,
+[  --enable-libstdcxx-v3 
+			  enable libstdc++-v3 for building and installation],
+  [enable_libstdcxx_v3="$enableval"], [enable_libstdcxx_v3=yes])
+
+if test x$enable_libstdcxx_v3 = xyes; then
+  AC_MSG_RESULT(v3)
+  HAVE_LIBSTDCXX_V3=1
+  ac_esn=1
+else
+  AC_MSG_RESULT(v2)
+  HAVE_LIBSTDCXX_V3=0
+  ac_esn=0
+fi
+
 # Don't set gcc_gxx_include_dir to gxx_include_dir since that's only
 # passed in by the toplevel make and thus we'd get different behavior
 # depending on where we built the sources.
@@ -4942,22 +4959,6 @@ echo "Building a new-abi g++ compiler."
 ])
 AC_SUBST(GXX_ABI_FLAG)
 
-# Build a new-libstdc++ system (ie libstdc++-v3)
-AC_MSG_CHECKING([for libstdc++ to install])
-AC_ARG_ENABLE(libstdcxx-v3,
-[  --enable-libstdcxx-v3 
-			  enable libstdc++-v3 for building and installation],
-  [enable_libstdcxx_v3="$enableval"], [enable_libstdcxx_v3=yes])
-
-if test x$enable_libstdcxx_v3 = xyes; then
-  AC_MSG_RESULT(v3)
-  HAVE_LIBSTDCXX_V3=1
-  ac_esn=1
-else
-  AC_MSG_RESULT(v2)
-  HAVE_LIBSTDCXX_V3=0
-  ac_esn=0
-fi
 AC_DEFINE_UNQUOTED(ENABLE_STD_NAMESPACE, $ac_esn,
   [Define to 1 if you want to enable namespaces (-fhonor-std) by default.])
 AC_SUBST(HAVE_LIBSTDCXX_V3)