xtensa: Correct the relative RTX cost that corresponds to the Move Immediate "MOVI" instruction

This patch corrects the overestimation of the relative cost of
'(set (reg) (const_int N))' where N fits into the instruction itself.

In fact, such overestimation confuses the RTL loop invariant motion pass.
As a result, it brings almost no negative impact from the speed point of
view, but addtiional reg-reg move instructions and register allocation
pressure about the size.

    /* example, optimized for size */
    extern int foo(void);
    extern int array[16];
    void test_0(void) {
      unsigned int i;
      for (i = 0; i < sizeof(array)/sizeof(*array); ++i)
        array[i] = 1024;
    }
    void test_1(void) {
      unsigned int i;
      for (i = 0; i < sizeof(array)/sizeof(*array); ++i)
        array[i] = array[i] ? 1024 : 0;
    }
    void test_2(void) {
      unsigned int i;
      for (i = 0; i < sizeof(array)/sizeof(*array); ++i)
        array[i] = foo() ? 0 : 1024;
    }

    ;; before
	.literal_position
	.literal .LC0, array
    test_0:
	l32r	a3, .LC0
	movi.n	a2, 0
	movi	a4, 0x400	// OK
    .L2:
	s32i.n	a4, a3, 0
	addi.n	a2, a2, 1
	addi.n	a3, a3, 4
	bnei	a2, 16, .L2
	ret.n
	.literal_position
	.literal .LC1, array
    test_1:
	l32r	a2, .LC1
	movi.n	a3, 0
	movi	a5, 0x400	// NG
    .L6:
	l32i.n	a4, a2, 0
	beqz.n	a4, .L5
	mov.n	a4, a5		// should be "movi a4, 0x400"
    .L5:
	s32i.n	a4, a2, 0
	addi.n	a3, a3, 1
	addi.n	a2, a2, 4
	bnei	a3, 16, .L6
	ret.n
	.literal_position
	.literal .LC2, array
    test_2:
	addi	sp, sp, -32
	s32i.n	a12, sp, 24
	l32r	a12, .LC2
	s32i.n	a13, sp, 20
	s32i.n	a14, sp, 16
	s32i.n	a15, sp, 12
	s32i.n	a0, sp, 28
	addi	a13, a12, 64
	movi.n	a15, 0		// NG
	movi	a14, 0x400	// and wastes callee-saved registers (only 4)
    .L11:
	call0	foo
	mov.n	a3, a14		// should be "movi a3, 0x400"
	movnez	a3, a15, a2
	s32i.n	a3, a12, 0
	addi.n	a12, a12, 4
	bne	a12, a13, .L11
	l32i.n	a0, sp, 28
	l32i.n	a12, sp, 24
	l32i.n	a13, sp, 20
	l32i.n	a14, sp, 16
	l32i.n	a15, sp, 12
	addi	sp, sp, 32
	ret.n

    ;; after
	.literal_position
	.literal .LC0, array
    test_0:
	l32r	a3, .LC0
	movi.n	a2, 0
	movi	a4, 0x400	// OK
    .L2:
	s32i.n	a4, a3, 0
	addi.n	a2, a2, 1
	addi.n	a3, a3, 4
	bnei	a2, 16, .L2
	ret.n
	.literal_position
	.literal .LC1, array
    test_1:
	l32r	a2, .LC1
	movi.n	a3, 0
    .L6:
	l32i.n	a4, a2, 0
	beqz.n	a4, .L5
	movi	a4, 0x400	// OK
    .L5:
	s32i.n	a4, a2, 0
	addi.n	a3, a3, 1
	addi.n	a2, a2, 4
	bnei	a3, 16, .L6
	ret.n
	.literal_position
	.literal .LC2, array
    test_2:
	addi	sp, sp, -16
	s32i.n	a12, sp, 8
	l32r	a12, .LC2
	s32i.n	a13, sp, 4
	s32i.n	a0, sp, 12
	addi	a13, a12, 64
    .L11:
	call0	foo
	movi.n	a3, 0		// OK
	movi	a4, 0x400	// and less register allocation pressure
	moveqz	a3, a4, a2
	s32i.n	a3, a12, 0
	addi.n	a12, a12, 4
	bne	a12, a13, .L11
	l32i.n	a0, sp, 12
	l32i.n	a12, sp, 8
	l32i.n	a13, sp, 4
	addi	sp, sp, 16
	ret.n

gcc/ChangeLog:

	* config/xtensa/xtensa.cc (xtensa_rtx_costs):
	Change the relative cost of '(set (reg) (const_int N))' where
	N fits into signed 12-bit from 4 to 0 if optimizing for size.
	And use the appropriate macro instead of the bare number 4.

1 files changed, 1 insertions, 1 deletions

diff --git a/gcc/config/xtensa/xtensa.cc b/gcc/config/xtensa/xtensa.cc
index 9433745..a851a7a 100644
--- a/gcc/config/xtensa/xtensa.cc
+++ b/gcc/config/xtensa/xtensa.cc
@@ -4073,7 +4073,7 @@ xtensa_rtx_costs (rtx x, machine_mode mode, int outer_code,
 	case SET:
 	  if (xtensa_simm12b (INTVAL (x)))
 	    {
-	      *total = 4;
+	      *total = speed ? COSTS_N_INSNS (1) : 0;
 	      return true;
 	    }
 	  break;