Makefile.in (ENQUIRE_CFLAGS, [...]): Move down to the end of the Makefile.

	* Makefile.in (ENQUIRE_CFLAGS, ENQUIRE_LDFLAGS): Move down to the end
	of the Makefile.
	(FLOAT_H_TEST): Likewise.
	(ENQUIRE): Likewise.
	(float.h-nat): Likewise.
	(float.h-cross): Likewise.
	(enquire): Likewise.
	(enquire.o): Likewise.
	(stmp-int-hdrs): Fix comment about enquire; depend upon gfloat.h.
	(stmp-headers): Move actions to stmp-int-hdrs, retaining only a
	no-op.
	(FLOAT_H): Remove old float.h-nat version; move current definition
	to CROSS_FLOAT_H location.
	(all.cross): Remove comments about enquire stuff.
	* Makefile.in (all.cross): Swap $(LIBGCC) and $(STMP_FIXPROTO).
	(rest.encap): Likewise.
	(libgcc2.ready): Depend upon $(STMP_FIXPROTO)

From-SVN: r20000

2 files changed, 86 insertions, 66 deletions

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index 4cff9d2..8b7b646 100644
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -27,8 +27,24 @@ Sat May 23 23:35:14 1998  Jeffrey A Law  (law@cygnus.com)
 
 1998-05-23  Manfred Hollstein  <manfred@s-direktnet.de>
 
+	* Makefile.in (ENQUIRE_CFLAGS, ENQUIRE_LDFLAGS): Move down to the end
+	of the Makefile.
+	(FLOAT_H_TEST): Likewise.
+	(ENQUIRE): Likewise.
+	(float.h-nat): Likewise.
+	(float.h-cross): Likewise.
+	(enquire): Likewise.
+	(enquire.o): Likewise.
+	(stmp-int-hdrs): Fix comment about enquire; depend upon gfloat.h.
+	(stmp-headers): Move actions to stmp-int-hdrs, retaining only a
+	no-op.
+	(FLOAT_H): Remove old float.h-nat version; move current definition
+	to CROSS_FLOAT_H location.
+	(all.cross): Remove comments about enquire stuff.
+
 	* Makefile.in (all.cross): Swap $(LIBGCC) and $(STMP_FIXPROTO).
 	(rest.encap): Likewise.
+	(libgcc2.ready): Depend upon $(STMP_FIXPROTO)
 
 	* toplev.h (tree_node): Provide global declaration to avoid
 	`limited scope' warnings.
diff --git a/gcc/Makefile.in b/gcc/Makefile.in
index 343845a..c12b19d 100644
--- a/gcc/Makefile.in
+++ b/gcc/Makefile.in
@@ -161,11 +161,6 @@ GCC_FOR_TARGET = ./xgcc -B./
 # It also specifies -I./include to find, e.g., stddef.h.
 GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) -I./include $(TCFLAGS)
 
-# Special flags for compiling enquire.
-# We disable optimization to make floating point more reliable.
-ENQUIRE_CFLAGS = -DNO_MEM -DNO_LONG_DOUBLE_IO -O0
-ENQUIRE_LDFLAGS = $(LDFLAGS)
-
 # Sed command to transform gcc to installed name.  Overwritten by configure.
 program_transform_name = @program_transform_name@
 program_transform_cross_name = s,^,$(target_alias)-,
@@ -226,14 +221,6 @@ SYSTEM_HEADER_DIR = /usr/include
 # Control whether to run fixproto.
 STMP_FIXPROTO = stmp-fixproto
 
-# Test to see whether <float.h> exists in the system header files,
-# and is not derived from GCC.
-FLOAT_H_TEST = \
-  [ -f $(SYSTEM_HEADER_DIR)/float.h ] && \
-  if grep 'ifndef _FLOAT_H___' $(SYSTEM_HEADER_DIR)/float.h >/dev/null; \
-  then false; \
-  else :; fi
-
 # Test to see whether <limits.h> exists in the system header files.
 LIMITS_H_TEST = [ -f $(SYSTEM_HEADER_DIR)/limits.h ]
 
@@ -353,10 +340,6 @@ TARGET_LIBGCC2_CFLAGS =
 # Some targets override this to stmp-int-hdrs
 LIBGCC2_DEPS =
 
-# Enquire target (This is a variable so that a target can choose not to
-# build it.)
-ENQUIRE = enquire
-
 # libgcc1-test target (must also be overridable for a target)
 LIBGCC1_TEST = libgcc1-test
 
@@ -403,6 +386,10 @@ LIB2FUNCS_EXTRA =
 # This is overridden by configure.
 CROSS_FLOAT_H=$(srcdir)/config/float-@float_format@.h
 
+# We do not try to build float.h anymore.  Let configure select the
+# appropriate pre-built float.h file for the target.
+FLOAT_H=$(srcdir)/config/float-@float_format@.h
+
 # Program to convert libraries.
 LIBCONVERT = 
 
@@ -475,12 +462,6 @@ ALL=all.internal
 # Choose the real install target.
 INSTALL_TARGET=install-normal
 
-# Source for float.h.  Overridden by cross-make.
-FLOAT_H=float.h-nat
-# We do not try to build float.h anymore.  Let configure select the
-# appropriate pre-built float.h file for the target.
-FLOAT_H=$(srcdir)/config/float-@float_format@.h
-
 # Setup the testing framework, if you have one
 EXPECT = `if [ -f $${rootme}/../expect/expect ] ; then \
             echo $${rootme}/../expect/expect ; \
@@ -875,37 +856,6 @@ gfloat.h: $(FLOAT_H)
 	-rm -f gfloat.h
 	cp $(FLOAT_H) gfloat.h
 
-# Create float.h source for the native machine.
-# Make it empty if we can use the system float.h without changes.
-float.h-nat: enquire
-	-./enquire -f > tmp-float.h
-	grep '#define [^_]' tmp-float.h >/dev/null || true > tmp-float.h
-	mv tmp-float.h float.h-nat
-
-# Create a dummy float.h source for a cross-compiler.
-# ??? This isn't used anymore.  Should we create config/float-unkn.h
-# and make that the default float_format in configure?
-float.h-cross:
-	echo "#ifndef	__GCC_FLOAT_NOT_NEEDED" > t-float.h-cross
-	echo "#error float.h values not known for cross-compiler" >> t-float.h-cross
-	echo "#endif" >> t-float.h-cross
-	mv t-float.h-cross float.h-cross
-
-# Used to compile enquire with standard cc, but have forgotten why.
-# Let's try with GCC.
-enquire: enquire.o $(GCC_PARTS)
-	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ENQUIRE_LDFLAGS) enquire.o -o $@
-enquire.o: $(srcdir)/enquire.c $(GCC_PASSES) stmp-int-hdrs
-	rm -f include/float.h
-	if $(FLOAT_H_TEST); then \
-	  SYS_FLOAT_H_WRAP=1; \
-	else :; \
-	  SYS_FLOAT_H_WRAP=0; \
-	fi; \
-	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(ENQUIRE_CFLAGS) \
-	  -DSYS_FLOAT_H_WRAP=$$SYS_FLOAT_H_WRAP \
-	  -I. -c $(srcdir)/enquire.c
-
 # Build the version of limits.h that we will install.
 xlimits.h: glimits.h limitx.h limity.h
 	if $(LIMITS_H_TEST) ; then \
@@ -1040,7 +990,7 @@ libgcc1.S: libgcc1.c $(CONFIG_H) config.status
 # Compiling libgcc2.a requires making sure that cc1, etc. have been compiled.
 # But recompiling cc1 should not force recompilation of libgcc2.a.
 # If you want to force recompilation, delete libgcc2.a.
-libgcc2.ready: $(GCC_PASSES) $(LIBGCC2_DEPS) stmp-int-hdrs
+libgcc2.ready: $(GCC_PASSES) $(LIBGCC2_DEPS) stmp-int-hdrs $(STMP_FIXPROTO)
 	-if [ -f libgcc2.ready ] ; then \
 		true; \
 	else \
@@ -1970,9 +1920,9 @@ gcov$(exeext): gcov.o $(LIBDEPS)
 # s-* so that mostlyclean does not force the include directory to
 # be rebuilt.
 
-# Build the include directory except for float.h (which depends upon
+# Build the include directory including float.h (which no longer depends upon
 # enquire).
-stmp-int-hdrs: stmp-fixinc $(USER_H) xlimits.h
+stmp-int-hdrs: stmp-fixinc $(USER_H) xlimits.h gfloat.h
 # Copy in the headers provided with gcc.
 # The sed command gets just the last file name component;
 # this is necessary because VPATH could add a dirname.
@@ -1990,20 +1940,20 @@ stmp-int-hdrs: stmp-fixinc $(USER_H) xlimits.h
 	rm -f include/limits.h
 	cp xlimits.h include/limits.h
 	chmod a+r include/limits.h
-# Install the README
-	rm -f include/README
-	cp $(srcdir)/README-fixinc include/README
-	chmod a+r include/README
-	touch stmp-int-hdrs
-
-# Build the complete include directory, including float.h.
-stmp-headers: stmp-int-hdrs gfloat.h
 	rm -f include/float.h
 	if [ -s gfloat.h ]; then \
 	  cp gfloat.h include/float.h && \
 	  chmod a+r include/float.h; \
 	else :; fi
-	touch stmp-headers
+# Install the README
+	rm -f include/README
+	cp $(srcdir)/README-fixinc include/README
+	chmod a+r include/README
+	touch $@
+
+# Now that gfloat.h no longer depends upon enquire, this is actually a no-op.
+stmp-headers:
+	touch $@
 
 fixinc.sh :
 	cd ../contrib/fixinc ; CC=$(CC) MAKE=$(MAKE) CFLAGS=$(CFLAGS) \
@@ -2900,3 +2850,57 @@ risky-stage4: stage4
 .PHONY: risky-stage1 risky-stage2 risky-stage3 risky-stage4
 
 force:
+
+# ---
+# The enquire rules are still useful for building new float-anything.h.
+# Special flags for compiling enquire.
+# We disable optimization to make floating point more reliable.
+ENQUIRE_CFLAGS = -DNO_MEM -DNO_LONG_DOUBLE_IO -O0
+ENQUIRE_LDFLAGS = $(LDFLAGS)
+
+# Enquire target (This is a variable so that a target can choose not to
+# build it.)
+ENQUIRE = enquire
+
+# Test to see whether <float.h> exists in the system header files,
+# and is not derived from GCC.
+FLOAT_H_TEST = \
+  [ -f $(SYSTEM_HEADER_DIR)/float.h ] && \
+  if grep 'ifndef _FLOAT_H___' $(SYSTEM_HEADER_DIR)/float.h >/dev/null; \
+  then false; \
+  else :; fi
+# We pretend to not having a usable <float.h>, hence disable the FLOAT_H_TEST
+# to ensure, we're emitting a full blown <float.h> ourselves.
+FLOAT_H_TEST = false
+
+# Used to compile enquire with standard cc, but have forgotten why.
+# Let's try with GCC.
+enquire: enquire.o $(GCC_PARTS)
+	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ENQUIRE_LDFLAGS) enquire.o -o $@
+enquire.o: $(srcdir)/enquire.c $(GCC_PASSES) stmp-int-hdrs
+	if $(FLOAT_H_TEST); then \
+	  rm -f include/float.h; \
+	  SYS_FLOAT_H_WRAP=1; \
+	else :; \
+	  SYS_FLOAT_H_WRAP=0; \
+	fi; \
+	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(ENQUIRE_CFLAGS) \
+	  -DSYS_FLOAT_H_WRAP=$$SYS_FLOAT_H_WRAP \
+	  -I. -c $(srcdir)/enquire.c
+
+# Create float.h source for the native machine.
+# Make it empty if we can use the system float.h without changes.
+float.h-nat: enquire
+	-./enquire -f > tmp-float.h
+	grep '#define [^_]' tmp-float.h >/dev/null || true > tmp-float.h
+	mv tmp-float.h float.h-nat
+
+# Create a dummy float.h source for a cross-compiler.
+# ??? This isn't used anymore.  Should we create config/float-unkn.h
+# and make that the default float_format in configure?
+float.h-cross:
+	echo "#ifndef	__GCC_FLOAT_NOT_NEEDED" > t-float.h-cross
+	echo "#error float.h values not known for cross-compiler" >> t-float.h-cross
+	echo "#endif" >> t-float.h-cross
+	mv t-float.h-cross float.h-cross
+