@c ---------------------------------------------------------------------------- @c This is the Texinfo source file for the gp-collect-app man page. @c @c Author: Ruud van der Pas @c ---------------------------------------------------------------------------- @ifset man \input texinfo @c -*-texinfo-*- @setfilename gprofng collect app @settitle Collect performance data for the target application @include gp-macros.texi @end ifset @c ---------------------------------------------------------------------------- @c This is from the man-pages(7) man page @c @c "The list below shows conventional or suggested sections. Most manual pages @c should include at least the highlighted sections. Arrange a new manual @c page so that sections are placed in the order shown in the list." @c @c NAME @c SYNOPSIS @c CONFIGURATION [Normally only in Section 4] @c DESCRIPTION @c OPTIONS [Normally only in Sections 1, 8] @c EXIT STATUS [Normally only in Sections 1, 8] @c RETURN VALUE [Normally only in Sections 2, 3] @c ERRORS [Typically only in Sections 2, 3] @c ENVIRONMENT @c FILES @c VERSIONS [Normally only in Sections 2, 3] @c ATTRIBUTES [Normally only in Sections 2, 3] @c CONFORMING TO @c NOTES @c BUGS @c EXAMPLES @c AUTHORS [Discouraged] @c REPORTING BUGS [Not used in man-pages] @c COPYRIGHT [Not used in man-pages] @c SEE ALSO @c @c This is what the texi2pod.pl tool recognizes: @c @c for $sect (qw(NAME SYNOPSIS TARGET DESCRIPTION OPTIONS ENVIRONMENT FILES @c BUGS NOTES FOOTNOTES SEEALSO AUTHOR COPYRIGHT)) { @c @c What is interesting is that it places "SEE ALSO" before "COPYRIGHT", which @c makes sense and adhered to for the other formats. @c ---------------------------------------------------------------------------- @c ---------------------------------------------------------------------------- @c NAME section @c ---------------------------------------------------------------------------- @ManPageStart{NAME} @c man begin NAME gprofng collect app - Collect performance data for the target program @c man end @ManPageEnd{} @c ---------------------------------------------------------------------------- @c SYNOPSIS section @c ---------------------------------------------------------------------------- @ManPageStart{SYNOPSIS} @c man begin SYNOPSIS @command{gprofng collect app} [@var{option(s)}] @var{target} [@var{option(s)}] @c man end @ManPageEnd{} @c ---------------------------------------------------------------------------- @c DESCRIPTION section @c ---------------------------------------------------------------------------- @ManPageStart{DESCRIPTION} @c man begin DESCRIPTION Collect performance data on the target program. In addition to Program Counter (PC) sampling, hardware event counters and various tracing options are supported. For example, this command collects performance data for an executable called @samp{a.out} and stores the data collected in an experiment directory with the name @samp{example.er}. @smallexample $ gprofng collect app -o example.er ./a.out @end smallexample @c man end @ManPageEnd{} @c ---------------------------------------------------------------------------- @c OPTIONS section @c ---------------------------------------------------------------------------- @ManPageStart{OPTIONS} @c man begin OPTIONS @table @gcctabopt @item --version @ifclear man @IndexSubentry{Options, @code{--version}} @end ifclear Print the version number and exit. @item --help @ifclear man @IndexSubentry{Options, @code{--help}} @end ifclear Print usage information and exit. @c -- @item --verbose @{on|off@} @c -- @ifclear man @c -- @IndexSubentry{Options, @code{--verbose}} @c -- @end ifclear @c -- Enable (on) or disable (off) verbose mode; the default is @samp{off}. @item -p @{off|on|lo|hi|@var{}@} @ifclear man @IndexSubentry{Options, @code{-p}} @end ifclear Disable (off) or enable (on) clock-profiling using a default sampling granularity, or enable clock-profiling implicitly by setting the sampling granularity (lo, hi, or a specific value in ms). By default, clock profiling is enabled (@samp{-p on}). @item -h @var{@{...,@}} @ifclear man @IndexSubentry{Options, @code{-h}} @end ifclear Enable hardware event counter profiling and select the counter(s). To see the supported counters on this system, use the @samp{-h} option without other arguments. @item -o @var{} @ifclear man @IndexSubentry{Options, @code{-o}} @end ifclear Specify the name for the experiment directory. The name has to end with @samp{.er} and may contain an absolute path (e.g. @file{/tmp/experiment.er}). @item -O @var{} @ifclear man @IndexSubentry{Options, @code{-O}} @end ifclear This is the same as the @samp{-o} option, but unlike this option, silently overwrites an existing experiment directory with the same name. @item -C @var{} @ifclear man @IndexSubentry{Options, @code{-C}} @end ifclear Add up to 10 comment strings to the experiment. These comments appear in the notes section of the header and can be retrieved with the @command{gprofng display text} command using the @samp{-header} option. @item -j @{on|off|@var{}@} @ifclear man @IndexSubentry{Options, @code{-j}} @end ifclear Controls Java profiling when the target is a JVM machine. The allowed values of this option are: enable (on), disable (off) Java profiling when the target program is a JVM, or set @samp{} to a non-default JVM. The default is @samp{-j on} @table @gcctabopt @item on Record profiling data for the JVM machine, and recognize methods compiled by the Java HotSpot virtual machine. Also record Java call stacks. The default is @samp{-j on}. @item off Does not record Java profiling data. Profiling data for native call stacks is still recorded. @item @var{} Records profiling data for the JVM, and use the JVM as installed in @var{}. @end table @item -J @var{} @ifclear man @IndexSubentry{Options, @code{-J}} @end ifclear Specifies additional options to be passed to the JVM used. The @var{jvm-options} list must be enclosed in quotation marks if it contains more than one option. The items in the list need to be separated by spaces or tab. Each item is passed as a separate option to the JVM. Note that this option implies @samp{-j on}. @item -t @var{}[m|s] @ifclear man @IndexSubentry{Options, @code{-t}} @end ifclear Collects data for the specified duration. The duration can be a single number, optionally followed by either @samp{m} to specify minutes, or @samp{s} to specify seconds, which is the default. The duration can also two numbers separated by minus (-) sign. If a single number is given, data is collected from the start of the run until the given time. If two numbers are given, data is collected from the first time to the second. If the second time is zero, data is collected until the end of the run. If two non-zero numbers are given, the first must be less than the second. @item -n @ifclear man @IndexSubentry{Options, @code{-n}} @end ifclear This is used for a dry run. Several run-time settings are displayed, but the target is not executed and no performance data is collected. @item -F @{off|on|=@var{regex}@} @ifclear man @IndexSubentry{Options, @code{-F}} @end ifclear Control whether descendant processes should have their data recorded. To disable/enable this feature, use @samp{off}/@samp{on}. Use @samp{=}@var{regex} to record data on those processes whose executable name matches the regular expression. Only the basename of the executable is used, not the full path. If spaces or characters interpreted by the shell are used, enclose the @var{regex} in single quotes. The default is @samp{-F on}. @item -a @{off|on|ldobjects|src|usedldobjects|usedsrc@} @ifclear man @IndexSubentry{Options, @code{-a}} @end ifclear Specify archiving of binaries and other files. In addition to disable this feature (off), or enable archiving off all loadobjects and sources (on), the other op tions support a more refined selection. All of these options enable archiving, but the keyword controls what exactly is selected: all load objects (ldobjects), all source files (src), the loadobjects asscoiated with a program counter (usedldobjects), or the source files associated with a program counter (usedsrc). The default is @samp{-a ldobjects}. @item -S @{off|on|@var{}@} @ifclear man @IndexSubentry{Options, @code{-S}} @end ifclear Disable (off), or enable (on) periodic sampling of process-wide resource utilization. By default, sampling occurs every second. Use the @var{} option to change this. The default is @samp{-S on}. @item -y @var{}[,r] @ifclear man @IndexSubentry{Options, @code{-y}} @end ifclear Controls recording of data with the signal named @var{}, referred to as the pause-resume signal. Whenever the given signal is delivered to the process, switch between paused (no data is recorded) and resumed (data is recorded) states. By default, data collection begins in the paused state. If the optional @samp{r} is given, data collection begins in the resumed state and data collection begins immediately. SIGUSR1 or SIGUSR2 are recommended for this use, but any signal that is not used by the target can be used. @item -l @var{} @ifclear man @IndexSubentry{Options, @code{-l}} @end ifclear Specify a signal that will trigger a sample of process-wide resource utilization. When the named @var{} is delivered to the process, a sample is recorded. The signal can be specified using the full name, without the initial letters @code{SIG}, or the signal number. Note that the @command{kill} command can be used to deliver a signal. If both the @samp{-l} and @samp{-y} options are used, the signal must be different. @item -s @var{