2023-07-30 GDB Administrator Automatic date update in version.in 2023-07-29 GDB Administrator Automatic date update in version.in 2023-07-28 Jan Beulich gas: amend X_unsigned uses PR gas/30688 X_unsigned being clear does not indicate a negative number; it merely indicates a signed one (whose sign may still be clear). Amend two uses by an actual value check. 2023-07-28 Tsukasa OI RISC-V: Add actual 'Zvkt' extension support The 'Zvkt' extension is listed on the added extensions in the GNU Binutils version 2.41 (see binutils/NEWS). However, the support of this extension was actually missing. This commit adds actual support of this extension and adds implications from 'Zvkn' and 'Zvks' superset extensions. bfd/ChangeLog: * elfxx-riscv.c (riscv_implicit_subsets) Add implications from 'Zvkn' and 'Zvks'. (riscv_supported_std_z_ext): Add 'Zvkt' to the supported extension list. 2023-07-28 YunQiang Su MIPS: Support `-gnuabi64' target triplet suffix for 64-bit Linux targets Make the n64 ABI the default for 64-bit Linux targets specified with `-gnuabi64' suffix included in the target triplet, for configurations such as the Debian mips64el and mips64r6el ports. Adjust testsuite configuration accordingly. There are the following regressions with the new target triplet: mips64-linux-gnuabi64 +FAIL: readelf -S bintest mips64-linux-gnuabi64 +FAIL: MIPS reloc estimation 1 mips64el-linux-gnuabi64 +FAIL: readelf -S bintest mips64el-linux-gnuabi64 +FAIL: MIPS reloc estimation 1 The `readelf' issue comes from a difference in section headers produced that the `binutils/testsuite/binutils-all/readelf.s-64' pattern template does not match. While there has been a precedent it does not appear to me that there is a clear advantage from adding more and more variations to the template rather than forking the existing template into multiple ones for a more exact match. So this is best deferred to a separate discussion. The MIPS reloc estimation issue is an actual bug in `objdump', which discards a number of trailing entries from output here for n64 composed relocations: DYNAMIC RELOCATION RECORDS OFFSET TYPE VALUE 0000000000000000 R_MIPS_NONE *ABS* 0000000000000000 R_MIPS_NONE *ABS* and consequently `ld/testsuite/ld-mips-elf/reloc-estimate-1.d' does not match even though ELF output produced is correct according to `readelf': Relocation section '.rel.dyn' at offset 0x10400 contains 2 entries: Offset Info Type Sym. Value Sym. Name 000000000000 000000000000 R_MIPS_NONE Type2: R_MIPS_NONE Type3: R_MIPS_NONE 000000010000 000300001203 R_MIPS_REL32 0000000000010010 foo@@V2 Type2: R_MIPS_64 Type3: R_MIPS_NONE As a genuine bug this has to be handled separately. Co-Authored by: Maciej W. Rozycki bfd/ * config.bfd: Add `mips64*el-*-linux*-gnuabi64' and `mips64*-*-linux*-gnuabi64' targets. binutils/ * testsuite/binutils-all/mips/mips.exp: Handle `*-*-*-gnuabi64' targets. * testsuite/binutils-all/objcopy.exp: Handle `mips64*-*-*-gnuabi64' targets. * testsuite/binutils-all/remove-relocs-01.d: Likewise. * testsuite/binutils-all/remove-relocs-04.d: Likewise. * testsuite/binutils-all/remove-relocs-05.d: Likewise. * testsuite/binutils-all/remove-relocs-06.d: Likewise. gas/ * configure.ac: Handle `mips64*-linux-gnuabi64' targets. * configure: Regenerate. * testsuite/gas/mips/compact-eh-eb-7.d: Handle `mips64*-*-*-gnuabi64' targets. * testsuite/gas/mips/compact-eh-el-7.d: Likewise. ld/ * configure.tgt: Add `mips64*el-*-linux-gnuabi64' and `mips64*-*-linux-gnuabi64' targets. * testsuite/ld-undefined/undefined.exp: Handle `mips64*-*-*-gnuabi64' targets. * testsuite/ld-mips-elf/attr-gnu-4-10.d: Likewise. * testsuite/ld-mips-elf/compact-eh6.d: Likewise. * testsuite/ld-mips-elf/mips-elf.exp: Handle `*-*-*-gnuabi64' targets. (cherry picked from commit 29c108c9610640439daa5244a573348b7c47d994) 2023-07-28 YunQiang Su MIPS/GAS/testsuite: Fix n64 compact EH failures Expect a `.MIPS.options' section alternatively to `.reginfo' and ignore contents of either as irrelevant for all the affected compact EH tests, removing these regressions: mips64-openbsd -FAIL: Compact EH EB #1 with personality ID and FDE data mips64-openbsd -FAIL: Compact EH EB #2 with personality routine and FDE data mips64-openbsd -FAIL: Compact EH EB #3 with personality id and large FDE data mips64-openbsd -FAIL: Compact EH EB #4 with personality id, FDE data and LSDA mips64-openbsd -FAIL: Compact EH EB #5 with personality routine, FDE data and LSDA mips64-openbsd -FAIL: Compact EH EB #6 with personality id, LSDA and large FDE data mips64-openbsd -FAIL: Compact EH EL #1 with personality ID and FDE data mips64-openbsd -FAIL: Compact EH EL #2 with personality routine and FDE data mips64-openbsd -FAIL: Compact EH EL #3 with personality id and large FDE data mips64-openbsd -FAIL: Compact EH EL #4 with personality id, FDE data and LSDA mips64-openbsd -FAIL: Compact EH EL #5 with personality routine, FDE data and LSDA mips64-openbsd -FAIL: Compact EH EL #6 with personality id, LSDA and large FDE data mips64el-openbsd -FAIL: Compact EH EB #1 with personality ID and FDE data mips64el-openbsd -FAIL: Compact EH EB #2 with personality routine and FDE data mips64el-openbsd -FAIL: Compact EH EB #3 with personality id and large FDE data mips64el-openbsd -FAIL: Compact EH EB #4 with personality id, FDE data and LSDA mips64el-openbsd -FAIL: Compact EH EB #5 with personality routine, FDE data and LSDA mips64el-openbsd -FAIL: Compact EH EB #6 with personality id, LSDA and large FDE data mips64el-openbsd -FAIL: Compact EH EL #1 with personality ID and FDE data mips64el-openbsd -FAIL: Compact EH EL #2 with personality routine and FDE data mips64el-openbsd -FAIL: Compact EH EL #3 with personality id and large FDE data mips64el-openbsd -FAIL: Compact EH EL #4 with personality id, FDE data and LSDA mips64el-openbsd -FAIL: Compact EH EL #5 with personality routine, FDE data and LSDA mips64el-openbsd -FAIL: Compact EH EL #6 with personality id, LSDA and large FDE data Co-Authored-By: Maciej W. Rozycki gas/ * testsuite/gas/mips/compact-eh-eb-1.d: Accept `.MIPS.options' section as an alternative to `.reginfo' and ignore contents of either. * testsuite/gas/mips/compact-eh-eb-2.d: Likewise. * testsuite/gas/mips/compact-eh-eb-3.d: Likewise. * testsuite/gas/mips/compact-eh-eb-4.d: Likewise. * testsuite/gas/mips/compact-eh-eb-5.d: Likewise. * testsuite/gas/mips/compact-eh-eb-6.d: Likewise. * testsuite/gas/mips/compact-eh-el-1.d: Likewise. * testsuite/gas/mips/compact-eh-el-2.d: Likewise. * testsuite/gas/mips/compact-eh-el-3.d: Likewise. * testsuite/gas/mips/compact-eh-el-4.d: Likewise. * testsuite/gas/mips/compact-eh-el-5.d: Likewise. * testsuite/gas/mips/compact-eh-el-6.d: Likewise. (cherry picked from commit 316be2b229f5bd07ebef48fd1d7b8cb103e4d815) 2023-07-28 YunQiang Su testsuite: Handle composed R_MIPS_NONE relocations MIPS n64 ABI has a peculiarity where all relocations are composed of three, with subsequent relocation types set to R_MIPS_NONE if further calculation is not required. Example output produced by `readelf' and `objdump' for such relocations is: Offset Info Type Sym. Value Sym. Name + Addend 000000000000 000800000002 R_MIPS_32 0000000000000000 foo + 0 Type2: R_MIPS_NONE Type3: R_MIPS_NONE and: OFFSET TYPE VALUE 0000000000000000 R_MIPS_32 foo 0000000000000000 R_MIPS_NONE *ABS* 0000000000000000 R_MIPS_NONE *ABS* respectively. The presence of these extra R_MIPS_NONE entries is not relevant for generic or even some MIPS tests, so optionally match them with the respective dump patterns, also discarding `xfail' annotation for MIPS/OpenBSD targets from gas/elf/missing-build-notes.d, removing these regressions: mips64-openbsd -FAIL: readelf -r bintest mips64-openbsd -FAIL: forward expression mips64-openbsd -FAIL: assignment tests mips64-openbsd -FAIL: gas/all/none mips64-openbsd -XFAIL: gas/elf/missing-build-notes mips64-openbsd -FAIL: macro test 2 mips64-openbsd -FAIL: macro irp mips64-openbsd -FAIL: macro rept mips64-openbsd -FAIL: nested irp/irpc/rept mips64-openbsd -FAIL: macro vararg mips64-openbsd -FAIL: mips jalx mips64-openbsd -FAIL: ST Microelectronics Loongson-2F workarounds of Jump Instruction issue mips64el-openbsd -FAIL: readelf -r bintest mips64el-openbsd -FAIL: forward expression mips64el-openbsd -FAIL: assignment tests mips64el-openbsd -FAIL: gas/all/none mips64el-openbsd -XFAIL: gas/elf/missing-build-notes mips64el-openbsd -FAIL: macro test 2 mips64el-openbsd -FAIL: macro irp mips64el-openbsd -FAIL: macro rept mips64el-openbsd -FAIL: nested irp/irpc/rept mips64el-openbsd -FAIL: macro vararg mips64el-openbsd -FAIL: mips jalx mips64el-openbsd -FAIL: ST Microelectronics Loongson-2F workarounds of Jump Instruction issue Co-Authored-By: Maciej W. Rozycki binutils/ * testsuite/binutils-all/readelf.r-64: Optionally match extra R_MIPS_NONE pairs. gas/ * testsuite/gas/all/assign.d: Optionally match extra R_MIPS_NONE pairs. * testsuite/gas/all/fwdexp.d: Likewise. * testsuite/gas/all/none.d: Likewise. * testsuite/gas/macros/irp.d: Likewise. * testsuite/gas/macros/repeat.d: Likewise. * testsuite/gas/macros/rept.d: Likewise. * testsuite/gas/macros/test2.d: Likewise. * testsuite/gas/macros/vararg.d: Likewise. * testsuite/gas/mips/compact-eh-eb-1.d: Likewise. * testsuite/gas/mips/compact-eh-eb-2.d: Likewise. * testsuite/gas/mips/compact-eh-eb-3.d: Likewise. * testsuite/gas/mips/compact-eh-eb-4.d: Likewise. * testsuite/gas/mips/compact-eh-eb-5.d: Likewise. * testsuite/gas/mips/compact-eh-eb-6.d: Likewise. * testsuite/gas/mips/compact-eh-el-1.d: Likewise. * testsuite/gas/mips/compact-eh-el-2.d: Likewise. * testsuite/gas/mips/compact-eh-el-3.d: Likewise. * testsuite/gas/mips/compact-eh-el-4.d: Likewise. * testsuite/gas/mips/compact-eh-el-5.d: Likewise. * testsuite/gas/mips/compact-eh-el-6.d: Likewise. * testsuite/gas/mips/loongson-2f-3.d: Likewise. * testsuite/gas/mips/mips-jalx.d: Likewise. * testsuite/gas/elf/missing-build-notes.d: Likewise. Remove the `xfail' tag. ld/ * testsuite/ld-mips-elf/reloc-estimate-1.d: Optionally match extra R_MIPS_NONE pairs. (cherry picked from commit ed4dca900c0dbc1317917cb289255d2f8d03f732) 2023-07-28 YunQiang Su MIPS/testsuite: Handle 64-bit addresses Several MIPS test cases are suitable for the n64 ABI if not for the extra leading zeros or spaces in addresses not handled by dump patterns. Match the characters then, removing these regressions: mips64-openbsd -FAIL: .set arch=FOO mips64-openbsd -FAIL: ST Microelectronics Loongson-2F workarounds of nop issue mips64-openbsd -FAIL: MIPS DSP ASE for MIPS64 mips64-openbsd -FAIL: gas/mips/align2 mips64-openbsd -FAIL: gas/mips/align2-el mips64-openbsd -FAIL: Locally-resolvable PC-relative code references mips64-openbsd -FAIL: MIPS jalx-1 mips64-openbsd -FAIL: JAL overflow 2 mips64el-openbsd -FAIL: .set arch=FOO mips64el-openbsd -FAIL: ST Microelectronics Loongson-2F workarounds of nop issue mips64el-openbsd -FAIL: MIPS DSP ASE for MIPS64 mips64el-openbsd -FAIL: gas/mips/align2 mips64el-openbsd -FAIL: gas/mips/align2-el mips64el-openbsd -FAIL: Locally-resolvable PC-relative code references mips64el-openbsd -FAIL: MIPS jalx-1 mips64el-openbsd -FAIL: JAL overflow 2 Co-Authored-By: Maciej W. Rozycki gas/ * testsuite/gas/mips/align2-el.d: Match extra leading zeros with addresses. * testsuite/gas/mips/align2.d: Likewise. * testsuite/gas/mips/compact-eh-eb-1.d: Likewise. * testsuite/gas/mips/compact-eh-eb-2.d: Likewise. * testsuite/gas/mips/compact-eh-eb-3.d: Likewise. * testsuite/gas/mips/compact-eh-eb-4.d: Likewise. * testsuite/gas/mips/compact-eh-eb-5.d: Likewise. * testsuite/gas/mips/compact-eh-eb-6.d: Likewise. * testsuite/gas/mips/compact-eh-el-1.d: Likewise. * testsuite/gas/mips/compact-eh-el-2.d: Likewise. * testsuite/gas/mips/compact-eh-el-3.d: Likewise. * testsuite/gas/mips/compact-eh-el-4.d: Likewise. * testsuite/gas/mips/compact-eh-el-5.d: Likewise. * testsuite/gas/mips/compact-eh-el-6.d: Likewise. * testsuite/gas/mips/loongson-2f-2.d: Likewise. * testsuite/gas/mips/loongson-2f-3.d: Likewise. * testsuite/gas/mips/mips-jalx.d: Likewise. * testsuite/gas/mips/mips64-dsp.d: Likewise. * testsuite/gas/mips/pcrel-1.d: Likewise. * testsuite/gas/mips/set-arch.d: Likewise. ld/ * testsuite/ld-mips-elf/jaloverflow-2.d: Match extra leading zeros and spaces with addresses as appropriate. * testsuite/ld-mips-elf/jalx-1.d: Likewise. * testsuite/ld-mips-elf/reloc-estimate-1.d: Likewise. (cherry picked from commit ec76a6172f7b6d61f7d76c2bcf766122132116b8) 2023-07-28 YunQiang Su testsuite: Also discard the `.MIPS.options' section Also discard the `.MIPS.options' section, used with n64 MIPS binaries, along with similar other MIPS sections (`.reginfo', `.MIPS.abiflags') not relevant for the test cases concerned, fixing these regressions: mips64-openbsd -FAIL: ld-elf/group3a mips64-openbsd -FAIL: ld-elf/group3b mips64-openbsd -FAIL: Place orphan sections (map file check) mips64-openbsd -FAIL: ld-elf/orphan-region mips64-openbsd -FAIL: ld-elf/orphan mips64-openbsd -FAIL: overlay size (map file check) mips64-openbsd -FAIL: overlay size mips64el-openbsd -FAIL: ld-elf/group3a mips64el-openbsd -FAIL: ld-elf/group3b mips64el-openbsd -FAIL: Place orphan sections (map file check) mips64el-openbsd -FAIL: ld-elf/orphan-region mips64el-openbsd -FAIL: ld-elf/orphan mips64el-openbsd -FAIL: overlay size (map file check) mips64el-openbsd -FAIL: overlay size Co-Authored-By: Maciej W. Rozycki binutils/ * testsuite/binutils-all/strip-3.d: Add `-R .MIPS.options' to the `strip' tag. ld/ * testsuite/ld-elf/group.ld: Also discard `.MIPS.options'. * testsuite/ld-elf/orphan-region.ld: Likewise. * testsuite/ld-elf/orphan.ld: Likewise. * testsuite/ld-mips-elf/got-page-1.ld: Likewise. * testsuite/ld-scripts/overlay-size.t: Likewise. (cherry picked from commit 60ec8306db150e687fc05870949056bae6c8d635) 2023-07-28 Maciej W. Rozycki MIPS/LD/testsuite: Fix MIPS16 interlinking test IRIX 6 regressions IRIX 6 does not have MIPS16 stub section support in its n32 linker scripts, causing such input sections to be propagated to the respective output sections rather than `.text', causing dump pattern mismatches. Expect IRIX 6 to fail with n32 testing then, removing this regression: mips-sgi-irix6 -FAIL: MIPS16 interlinking for local functions 1 (n32) We may choose to update IRIX 6 n32 linker scripts sometime, as it seems a harmless change. ld/ * testsuite/ld-mips-elf/mips-elf.exp: Expect IRIX 6 to fail with n32 `mips16-local-stubs-1' testing. (cherry picked from commit ec3205bbc6f2018c9907bfd6e6c6ae51a2e01432) 2023-07-28 YunQiang Su MIPS/LD/testsuite: Fix MIPS16 interlinking test n64 regressions The MIPS16 interlinking test for local functions expects to be assembled with 32-bit addressing, otherwise causing assembly warnings: .../ld/testsuite/ld-mips-elf/mips16-local-stubs-1.s: Assembler messages: .../ld/testsuite/ld-mips-elf/mips16-local-stubs-1.s:16: Warning: la used to load 64-bit address; recommend using dla instead Use the per-ABI framework then to run the test explicitly for o32 and n32 ABIs only, replacing the `-mips4' option from the `as' tag with `.module mips4' pseudo-op within the source itself so as to avoid assembly errors: Assembler messages: Error: -mips4 conflicts with the other architecture options, which imply -mips3 with n32 testing for some targets, and ultimately removing these regressions: mips64-openbsd -FAIL: MIPS16 interlinking for local functions 1 mips64el-openbsd -FAIL: MIPS16 interlinking for local functions 1 Co-Authored-By: Maciej W. Rozycki ld/ * testsuite/ld-mips-elf/mips16-local-stubs-1.d: Remove `-mips4' from the `as' tag. * testsuite/ld-mips-elf/mips16-local-stubs-1.s: Add `.module mips4'. * testsuite/ld-mips-elf/mips-elf.exp: Run `mips16-local-stubs-1' for o32 and n32 ABIs only. (cherry picked from commit 3c8ed624caf3317b2155a8c00a7af6a8bb6a3c10) 2023-07-28 YunQiang Su MIPS/GAS/testsuite: Force o32 for tests expecting 32-bit addressing A few GAS tests expect to be assembled with 32-bit addressing, otherwise causing an assembly warning: .../gas/testsuite/gas/mips/fix-rm7000-2.s:11: Warning: la used to load 64-bit address; recommend using dla instead or pattern dump mismatches against 32-bit address calculations, however these tests do not enforce their expectation in any. For none of them the specific ABI used is of any relevance however, so select the o32 ABI unconditionally, removing these failures with OpenBSD targets: mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (micromips) mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips3) mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips4) mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips5) mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64) mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64r2) mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64r3) mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64r5) mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeon) mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeon2) mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeon3) mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeonp) mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (r4000) mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (sb1) mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (vr5400) mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (xlr) mips64-openbsd -FAIL: MIPS-OCTEON octeon_saa_saad (octeon2) mips64-openbsd -FAIL: MIPS-OCTEON octeon_saa_saad (octeon3) mips64-openbsd -FAIL: MIPS-OCTEON octeon_saa_saad (octeonp) mips64-openbsd -FAIL: Full MIPS R5900 mips64-openbsd -FAIL: MIPS R5900 VU0 mips64-openbsd -FAIL: Paired LL/SC for mips64r6 (mips64r6) mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (micromips) mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips3) mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips4) mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips5) mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64) mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64r2) mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64r3) mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64r5) mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeon) mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeon2) mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeon3) mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeonp) mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (r4000) mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (sb1) mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (vr5400) mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (xlr) mips64el-openbsd -FAIL: MIPS-OCTEON octeon_saa_saad (octeon2) mips64el-openbsd -FAIL: MIPS-OCTEON octeon_saa_saad (octeon3) mips64el-openbsd -FAIL: MIPS-OCTEON octeon_saa_saad (octeonp) mips64el-openbsd -FAIL: Full MIPS R5900 mips64el-openbsd -FAIL: MIPS R5900 VU0 mips64el-openbsd -FAIL: Paired LL/SC for mips64r6 (mips64r6) Co-Authored-By: Maciej W. Rozycki gas/ * testsuite/gas/mips/fix-rm7000-2.d: Add `-32' to the `as' tag. * testsuite/gas/mips/micromips@fix-rm7000-2.d: Likewise. * testsuite/gas/mips/r5900-full.d: Likewise. * testsuite/gas/mips/r5900-vu0.d: Likewise. * testsuite/gas/mips/llpscp-64.d: Add `as' tag with `-32'. * testsuite/gas/mips/octeon-saa-saad.d: Likewise. (cherry picked from commit ce0077a2e724146285c282037a41c68de6c0608d) 2023-07-28 Maciej W. Rozycki MIPS/LD/testsuite: Run `got-dump-1' for o32/n32 ABIs The `got-dump-1' test case uses 32-bit addressing, so it makes no sense to run it with the n64 ABI. And there is a corresponding `got-dump-2' test already for the n64 ABI. Use the per-ABI framework then to run the `got-dump-1' test explicitly for o32 and n32 ABIs only. ld/ * testsuite/ld-mips-elf/mips-elf.exp: Run `got-dump-1' for o32 and n32 ABIs only. (cherry picked from commit 70116eb5e6c74f9b526b1fec4e39f11238cb6a34) 2023-07-28 Maciej W. Rozycki MIPS/LD/testsuite: Fix `attr-gnu-4-10' failures with OpenBSD targets OpenBSD targets produce ELF64 files while the pattern dump expects ELF32 output and specific header sizes. Disable it for `mips64*-*-openbsd*' for these targets then, removing these failures: mips64-openbsd -FAIL: ld-mips-elf/attr-gnu-4-10 mips64el-openbsd -FAIL: ld-mips-elf/attr-gnu-4-10 ld/ * testsuite/ld-mips-elf/attr-gnu-4-10.d: Add `notarget' tag with `mips64*-*-openbsd*'. (cherry picked from commit b50c220d179d239eacd7d7e120f7466e2ea47170) 2023-07-28 Maciej W. Rozycki MIPS/LD/testsuite: Fix `attr-gnu-4-10' failures with IRIX targets IRIX targets do not enable the production of a `.pdr' section in GAS by default, which causes a failure with the `attr-gnu-4-10' test case due to a difference resulting in the number and indices of sections produced in linker output. As the presence or absence of this section is not relevant to this test case, just enable it unconditionally, fixing these regressions: mips-sgi-irix5 -FAIL: ld-mips-elf/attr-gnu-4-10 mips-sgi-irix6 -FAIL: ld-mips-elf/attr-gnu-4-10 ld/ * testsuite/ld-mips-elf/attr-gnu-4-10.d: Add `as' tag with `-mpdr'. (cherry picked from commit d4e5281f03764a985b1229e9417a4fd1bebcea17) 2023-07-28 Maciej W. Rozycki MIPS/LD/testsuite: Fix JALR relaxation test failure with IRIX 6 The `mips-sgi-irix6' target only supports IRIX linker emulations, but most JALR relaxation tests request the relevant traditional emulation instead, causing a link failure: ./ld-new: unrecognised emulation mode: elf32btsmipn32 Supported emulations: elf32bmipn32 elf32bsmip elf64bmip This is clearly an omission from the conversion to use the per-ABI framework made with commit 78da84f99405 ("MIPS/LD/testsuite: Correct mips-elf.exp test ABI/emul/endian arrangement"). These tests are also endianness agnostic, which was missed in the conversion as well. Remove the unnecessary explicit ABI and endianness options then and rely on the per-ABI framework to get things right, removing this regression: mips-sgi-irix6 -FAIL: MIPS relax-jalr-shared n32 ld/ * testsuite/ld-mips-elf/relax-jalr-n32-shared.d: Remove flags related to ABI and endianness selection from the `as' and `ld' tags. * testsuite/ld-mips-elf/relax-jalr-n64.d: Likewise. * testsuite/ld-mips-elf/relax-jalr-n64-shared.d: Likewise. * testsuite/ld-mips-elf/mips-elf.exp: Remove `as' and `ld' tag additions from the invocation of JALR relaxation tests. (cherry picked from commit 94052ee4ccf0ac64b5f55da59878f13d567ef3cf) 2023-07-28 Maciej W. Rozycki MIPS/LD/testsuite: Fix unaligned JALX failures with OpenBSD targets There are only n64 linker emulations included with `mips64*-*-openbsd*' targets, however the unaligned JALX tests insist on running across all targets and force the n32 ABI, causing link errors with the targets concerned, e.g.: ./ld-new: tmpdir/unaligned-jalx-0.o: ABI is incompatible with that of the selected emulation ./ld-new: failed to merge target specific data of file tmpdir/unaligned-jalx-0.o ./ld-new: tmpdir/unaligned-insn.o: ABI is incompatible with that of the selected emulation ./ld-new: failed to merge target specific data of file tmpdir/unaligned-insn.o Convert the tests then to use the per-ABI framework and run them for the o32 and n32 ABIs, removing these regressions: mips64-openbsd -FAIL: MIPS JALX to unaligned symbol 0 mips64-openbsd -FAIL: MIPS JALX to unaligned symbol 1 mips64-openbsd -FAIL: MIPS JALX to unaligned symbol 2 mips64-openbsd -FAIL: MIPS JALX to unaligned symbol 3 mips64-openbsd -FAIL: MIPS16 JALX to unaligned symbol 0 mips64-openbsd -FAIL: MIPS16 JALX to unaligned symbol 1 mips64-openbsd -FAIL: microMIPS JALX to unaligned symbol 0 mips64-openbsd -FAIL: microMIPS JALX to unaligned symbol 1 mips64el-openbsd -FAIL: MIPS JALX to unaligned symbol 0 mips64el-openbsd -FAIL: MIPS JALX to unaligned symbol 1 mips64el-openbsd -FAIL: MIPS JALX to unaligned symbol 2 mips64el-openbsd -FAIL: MIPS JALX to unaligned symbol 3 mips64el-openbsd -FAIL: MIPS16 JALX to unaligned symbol 0 mips64el-openbsd -FAIL: MIPS16 JALX to unaligned symbol 1 mips64el-openbsd -FAIL: microMIPS JALX to unaligned symbol 0 mips64el-openbsd -FAIL: microMIPS JALX to unaligned symbol 1 Similar tests for the n64 ABI can be added separately, using suitable dump patterns. ld/ * testsuite/ld-mips-elf/unaligned-jalx-0.d: Remove `-32' from the `as' tag. * testsuite/ld-mips-elf/unaligned-jalx-1.d: Likewise. * testsuite/ld-mips-elf/unaligned-jalx-2.d: Likewise. * testsuite/ld-mips-elf/unaligned-jalx-3.d: Likewise. * testsuite/ld-mips-elf/unaligned-jalx-mips16-0.d: Likewise. * testsuite/ld-mips-elf/unaligned-jalx-mips16-1.d: Likewise. * testsuite/ld-mips-elf/unaligned-jalx-micromips-0.d: Likewise. * testsuite/ld-mips-elf/unaligned-jalx-micromips-1.d: Likewise. * testsuite/ld-mips-elf/mips-elf.exp: Run unaligned JALX tests with `run_dump_test_o32' and `run_dump_test_n32' rather than `run_dump_test'. (cherry picked from commit 67e789ae32fadc540c10839f08ad53ff01e2d732) 2023-07-28 Maciej W. Rozycki MIPS/GAS/testsuite: Disable compact EH #7 tests with OpenBSD targets Compact EH #7 tests use output templates that are not suitable for the n64 ABI, which `mips64*-*-openbsd*' targets use by default, because the contents of the sections examined are expected to be differnt. Disable the tests then, removing these regressions: mips64-openbsd -FAIL: Compact EH EB #7 with personality id and fallback FDE mips64-openbsd -FAIL: Compact EH EL #7 with personality id and fallback FDE mips64el-openbsd -FAIL: Compact EH EB #7 with personality id and fallback FDE mips64el-openbsd -FAIL: Compact EH EL #7 with personality id and fallback FDE Suitable corresponding tests for the n64 ABI can be added separately. gas/ * testsuite/gas/mips/compact-eh-eb-7.d: Exclude for `mips64*-*-openbsd*'. * testsuite/gas/mips/compact-eh-el-7.d: Likewise. (cherry picked from commit 2b4a60ab59f14a8fc1039c0cea41d22674447c1e) 2023-07-28 YunQiang Su MIPS/LD: Include n64 `.interp' with INITIAL_READONLY_SECTIONS In ld/emulparams/elf64bmip-defs.sh there is no explicit handling of the `.interp' section, which causes it to be positioned in output at an odd place. Let's include it with INITIAL_READONLY_SECTIONS, just like o32/n32 do, fixing a regression from commit 5a8e7be242f3 ("INITIAL_READONLY_SECTIONS in elf.sc"), where the handling of n64 was missed due to an unfortunate sequence of events where ld/emulparams/elf64bmip-defs.sh was only added with commit 94bb04b3c611 ("Use .reginfo rather than .MIPS.options in n32 linker scripts") the day before. Add test cases covering section ordering across the three ABIs. This change also fixes ld/pr23658-2: FAIL: Build pr23658-2 Co-Authored-By: Maciej W. Rozycki ld/ChangeLog: * emulparams/elf64bmip-defs.sh: Include `.interp' with INITIAL_READONLY_SECTIONS. * testsuite/ld-mips-elf/pie-n64.d: Adjust addresses. * testsuite/ld-mips-elf/sections-1-o32.rd: New test. * testsuite/ld-mips-elf/sections-1-o32t.rd: New test. * testsuite/ld-mips-elf/sections-1-n32.rd: New test. * testsuite/ld-mips-elf/sections-1-n32t.rd: New test. * testsuite/ld-mips-elf/sections-1-n32p.rd: New test. * testsuite/ld-mips-elf/sections-1-n64.rd: New test. * testsuite/ld-mips-elf/sections-1-n64t.rd: New test. * testsuite/ld-mips-elf/sections-2-o32.rd: New test. * testsuite/ld-mips-elf/sections-2-o32t.rd: New test. * testsuite/ld-mips-elf/sections-2-n32.rd: New test. * testsuite/ld-mips-elf/sections-2-n32t.rd: New test. * testsuite/ld-mips-elf/sections-2-n32p.rd: New test. * testsuite/ld-mips-elf/sections-2-n64.rd: New test. * testsuite/ld-mips-elf/sections-2-n64t.rd: New test. * testsuite/ld-mips-elf/sections.s: New test source. * testsuite/ld-mips-elf/mips-elf.exp: Run the new tests. (cherry picked from commit f625926792da741ab196ef71c16e481331965b6f) 2023-07-28 Maciej W. Rozycki Revert "MIPS: support mips*64 as CPU and gnuabi64 as ABI" This reverts commit 32f1c80375ebe8ad25d9805ee5889f0006c51e59. It had two unrelated changes lumped together, one of which changed the meaning of the `mipsisa64*-*-linux*' target triplets, which was not properly evaluated. (cherry picked from commit cc66ad2d2a63cec2eaafd7bbc6a9204490816c0b) 2023-07-28 GDB Administrator Automatic date update in version.in 2023-07-27 GDB Administrator Automatic date update in version.in 2023-07-26 GDB Administrator Automatic date update in version.in 2023-07-25 GDB Administrator Automatic date update in version.in 2023-07-24 mengqinggang LoongArch: Fix immediate overflow check bug * elfnn-loongarch.c (RELOCATE_CALC_PC32_HI20): Redefined. (RELOCATE_CALC_PC64_HI32): Redefined. * elfxx-loongarch.c (reloc_bits_pcrel20_s2): Delete. (reloc_bits_b16): Delete. (reloc_bits_b21): Delete. (reloc_bits_b26): Delete. (reloc_sign_bits): New. 2023-07-24 Nick Clifton Updated Serbian translations for bfd, gold and opcodes 2023-07-24 GDB Administrator Automatic date update in version.in 2023-07-23 GDB Administrator Automatic date update in version.in 2023-07-22 GDB Administrator Automatic date update in version.in 2023-07-21 Alan Modra MIPS: Don't move __gnu_lto_slim to .scommon * elfxx-mips.c (_bfd_mips_elf_symbol_processing): Don't treat __gnu_lto_slim as SHN_MIPS_SCOMMON. (_bfd_mips_elf_add_symbol_hook): Likewise. 2023-07-21 GDB Administrator Automatic date update in version.in 2023-07-20 GDB Administrator Automatic date update in version.in 2023-07-19 Nick Clifton merged Updated Romanian translation for the opcodes directory Updated Romainian translation for the opcodes directory 2023-07-19 Alan Modra [GOLD, PowerPC64] Debug info relocation overflow It is possible to build huge binaries on powerpc64, where 32-bit addresses in debug info are insufficient to descibe locations in the binary. Help out the user, and only warn about debug overflows. * powerpc.cc (Target_powerpc::Relocate::relocate): Warn on relocation overflows in debug info. (cherry picked from commit 03c02b696e90714a0ae2c0200d3c65cfffcaa1ee) 2023-07-19 Alan Modra PR10957, Missing option to really print section+offset Many of the reloc error messages have already been converted from using %C to using %H in ld.bfd, to print section+offset as well as file/line/function. This catches a few remaining, and changes gold to do the same. PR 10957 bfd/ * elf32-sh.c (sh_elf_relocate_section): Use %H in error messages. gold/ * object.cc (Relocate_info::location): Always report section+offset. * testsuite/debug_msg.sh: Adjust to suit. * testsuite/x32_overflow_pc32.sh: Likewise. * testsuite/x86_64_overflow_pc32.sh: Likewise. ld/ * emultempl/pe.em (read_addend): Use %H in error message. * emultempl/pep.em (read_addend): Likewise. * ldcref.c (check_reloc_refs): Likewise. * ldmain.c (warning_find_reloc, undefined_symbol): Likewise. * pe-dll.c (pe_create_import_fixup): Likewise. * testsuite/ld-cris/undef2.d: Adjust expected output to suit. * testsuite/ld-cris/undef3.d: Likewise. * testsuite/ld-elf/shared.exp: Likewise. * testsuite/ld-i386/compressed1.d: Likewise. * testsuite/ld-ia64/line.exp: Likewise. * testsuite/ld-plugin/lto.exp: Likewise. * testsuite/ld-undefined/undefined.exp: Likewise. * testsuite/ld-x86-64/compressed1.d: Likewise. * testsuite/ld-x86-64/line.exp: Likewise. * testsuite/ld-x86-64/pr27587.err: Likewise. (cherry picked from commit 02d2a36902c7b0fefe05e8d9bdbf11e846ac71fe) 2023-07-19 Alan Modra Fix loongarch build with gcc-4.5 * loongarch-opc.c (loongarch_alias_opcodes): Don't trigger gcc-4.5 bug in handling of struct initialisation. (cherry picked from commit 4993e5cc1e2e1e192f56f5788453c1b6f9cca894) 2023-07-19 Alan Modra elf_object_p load of dynamic symbols This fixes an uninitialised memory access on a fuzzed file: 0 0xf22e9b in offset_from_vma /src/binutils-gdb/bfd/elf.c:1899:2 1 0xf1e90f in _bfd_elf_get_dynamic_symbols /src/binutils-gdb/bfd/elf.c:2099:13 2 0x10e6a54 in bfd_elf32_object_p /src/binutils-gdb/bfd/elfcode.h:851:9 Hopefully it will also stop any attempt to load dynamic symbols from eu-strip debug files. * elfcode.h (elf_object_p): Do not attempt to load dynamic symbols for a file with no section headers until all the program headers are swapped in. Do not fail on eu-strip debug files. (cherry picked from commit 22e90ac5af46c01ee4972cf04e835266862bbb35) 2023-07-19 GDB Administrator Automatic date update in version.in 2023-07-18 Vladimir Mezentsev gprofng: 30602 [2.41] gprofng test hangs on i686-linux-gnu There were several problems in the gprofng testing: - we did not catch a timeout for each test. - we used exit() to stop a failed test. But this stops all other tests. - we used a time_t (long) type in smalltest.c instead of a long long type. PR gprofng/30602 * configure.ac: Launch only native testing. * configure: Rebuild. * testsuite/config/default.exp: Set TEST_TIMEOUT. * testsuite/gprofng.display/setpath_map.exp: Use return instead of exit. * testsuite/gprofng.display/gp-archive.exp: Likewise. * testsuite/gprofng.display/gp-collect-app_F.exp: Likewise. * testsuite/gprofng.display/display.exp: Delete an unnecessary test for native testing. * testsuite/lib/display-lib.exp (run_native_host_cmd): Add timeout. * testsuite/lib/smalltest.c: Use a long long type instead of time_t. 2023-07-18 Nick Clifton Updated Swedish translation for the binutils subdirectory 2023-07-18 Pter Chubb PR 30632 - ld segfaults if linker script includes a STARTUP line. 2023-07-18 GDB Administrator Automatic date update in version.in 2023-07-17 Mark Harmstone ld/PDB: fix off-by-1 in add_globals_ref() 2023-07-17 GDB Administrator Automatic date update in version.in 2023-07-16 GDB Administrator Automatic date update in version.in 2023-07-15 GDB Administrator Automatic date update in version.in 2023-07-14 GDB Administrator Automatic date update in version.in 2023-07-13 GDB Administrator Automatic date update in version.in 2023-07-12 Alan Modra Re: Keeping track of rs6000-coff archive element pointers bfd/ * coff-rs6000.c (add_range): Revise comment, noting possible fail. (_bfd_xcoff_openr_next_archived_file): Start with clean ranges. binutils/ * bfdtest1.c: Enhance to catch errors on second scan. (cherry picked from commit 1052fb3ecb1ae46bcf22634c48739c12e585196a) 2023-07-12 Alan Modra Use run_host_cmd to run $CC and other no-section-header test fixes We should be using run_host_cmd everywhere we invoke a compiler in the ld testsuite, if we want to use ld/ld-new just built. run_host_cmd properly inserts $gcc_B_opt in cases where a user wants to test binutils with a newly built compiler, ie. when $CC specifies -B itself. Also, it is not good practice to exclude tests when non-native except of course those tests that run a target binary. Compiling and linking often shows up problems. * testsuite/ld-elf/no-section-header.exp (binutils_run_test): Use run_host_cmd to invoke $CC_FOR_TARGET. Run all tests non-native too, except for attempting to run the binaries. Run tests for ELF in general, not just linux. * testsuite/ld-elf/pr25617-1-no-sec-hdr.rd: Allow localentry symbol decoration, and support either sorting of symbols. * testsuite/ld-elf/pr25617-1a-no-sec-hdr.rd: Likewise. * testsuite/ld-elf/pr25617-1a-sec-hdr.rd: Likewise. * testsuite/ld-elf/pr25617-1a-no-sec-hdr.nd: Accept D function syms. * testsuite/ld-elf/start-shared-noheader-sysv.rd: Accept mips-sgi-irix symbol output. * testsuite/ld-elf/start-shared-noheader.nd: Likewise. (cherry picked from commit 46f51ac38b81df4bf890e13824427c69285fdcaa) 2023-07-12 YunQiang Su ld: Use run_host_cmd_yesno in indirect.exp instead of catch exec Catch "exec $CC_FOR_TARGET" won't use the gas/ld that we just build, and in fact run_host_cmd_yesno is a better choice for it. ld/ChangeLog: * testsuite/ld-elf/indirect.exp: use run_host_cmd_yesno instead of handwrite catch exec $CC_FOR_TARGET. (cherry picked from commit 0f5cb49f68ae1be4b9702e71c3a9b80ee46b310a) 2023-07-12 YunQiang Su ld: Use [list ] syntax to define run_tests in indirect.exp Currently, the var run_tests is defined by syntax {{}}, while in this case, variables cannot be used. Thus $NOPIE_CFLAGS and $NOPIE_LDFLAGS are passed to cmd as names instead of values: gcc ... $NOPIE_CFLAGS -c .../indirect5a.c -o tmpdir/indirect5a.o Let's use [list [list ]] syntax instead. ld/ChangeLog: * testsuite/ld-elf/indirect.exp(run_tests): use [list [list]] syntax instead of {{}}. (cherry picked from commit 96a73f2cb2a1b4c47e49ff194a94f7394308956b) 2023-07-12 Alan Modra Re: Stop the linker's --dependency-file option from including temporary lto files. PR 30568 * ldfile.c (ldfile_try_open_bfd): Fix build failure when !BFD_SUPPORTS_PLUGINS. (cherry picked from commit 5f60df9974516867c02562b56c3a98cf4714a915) 2023-07-12 GDB Administrator Automatic date update in version.in 2023-07-11 GDB Administrator Automatic date update in version.in 2023-07-10 GDB Administrator Automatic date update in version.in 2023-07-09 GDB Administrator Automatic date update in version.in 2023-07-08 GDB Administrator Automatic date update in version.in 2023-07-07 Nick Clifton Replace local variable called 'rename' with 'renamed' Udated Freach and Romainian translations for various sub-directories 2023-07-07 YunQiang Su ld: fix plugin tests for MIPS PIC On MIPS, for PIC objects, symbols may reference 2 times: once from the caller, and once from GOT. Thus ld may complains 2 times about "undefined reference". So we add a new "#?" line to every effected testsuite. 2023-07-07 GDB Administrator Automatic date update in version.in 2023-07-06 GDB Administrator Automatic date update in version.in 2023-07-05 GDB Administrator Automatic date update in version.in 2023-07-04 Nick Clifton Updated Ukranian, Romanian and German translations for various sub-directories 2023-07-04 GDB Administrator Automatic date update in version.in 2023-07-03 Nick Clifton Change version number to 2.40.90 and regenerate files Add markers for the 2.41 branch 2023-07-03 WANG Xuerui gas: NEWS: Announce LoongArch changes in the 2.41 cycle gas/ChangeLog: * NEWS: Mention LoongArch changes for 2.41. 2023-07-03 WANG Xuerui binutils: NEWS: Announce LoongArch changes in the 2.41 cycle binutils/ChangeLog: * NEWS: Mention LoongArch changes for 2.41. 2023-07-03 WANG Xuerui LoongArch: gas: Fix shared builds Formerly an include of libbfd.h was added in commit 56576f4a722 ("LoongArch: gas: Add support for linker relaxation."), in order to allow calling _bfd_read_unsigned_leb128 from gas, but doing so broke shared builds. Commit d2fddb6d783 fixed this reference but did not remove the now unnecessary inclusion of libbfd.h. The gas_assert macro expands into a conditional call to abort(), but "abort" is re-defined to _bfd_abort in libbfd.h, so the extra include breaks any gas_assert usage, and should be removed. gas/ChangeLog: * config/tc-loongarch.c: Don't include libbfd.h. Fixes: d2fddb6d783 ("LoongArch: Fix ld "undefined reference" error with --enable-shared") 2023-07-03 WANG Xuerui opcodes/loongarch: Mark address offset operands of LVZ/LBT insns as such opcodes/ChangeLog: * loongarch-opc.c: Mark the offset operands as "so" for {,x}v{ld,st}, {,x}v{ldrepl,stelm}.[bhwd], and {ld,st}[lr].[wd]. 2023-07-03 GDB Administrator Automatic date update in version.in 2023-07-02 GDB Administrator Automatic date update in version.in 2023-07-01 Vladimir Mezentsev gprofng: fix data race In our GUI project (https://savannah.gnu.org/projects/gprofng-gui), we use the output of gprofng to display the data. Sometimes this data is corrupted. gprofng/ChangeLog 2023-06-29 Vladimir Mezentsev * src/ipc.cc (ipc_doWork): Fix data race. * src/ipcio.cc (IPCresponse::print): Fix data race. Remove unused variables and functions. * src/ipcio.h: Declare two variables. * src/StringBuilder.cc (StringBuilder::write): New function. * src/StringBuilder.h: Likewise. 2023-07-01 Christoph Müllner binutils: NEWS: Announce new RISC-V vector crypto extensions This commit adds the recently added support of the RISC-V vector crypto extensions to the NEWS file. binutils/ChangeLog: * NEWS: Announce new RISC-V vector crypto extensions. 2023-07-01 Nathan Huckleberry RISC-V: Add support for the Zvksc ISA extension Zvksc is part of the vector crypto extensions. Zvksc is shorthand for the following set of extensions: - Zvks - Zvbc bfd/ChangeLog: * elfxx-riscv.c: Define Zvksc extension. gas/ChangeLog: * testsuite/gas/riscv/zvksc.d: New test. * testsuite/gas/riscv/zvksc.s: New test. 2023-07-01 Nathan Huckleberry RISC-V: Add support for the Zvknc ISA extension Zvknc is part of the vector crypto extensions. Zvknc is shorthand for the following set of extensxions: - Zvkn - Zvbc bfd/ChangeLog: * elfxx-riscv.c: Define Zvknc extension. gas/ChangeLog: * testsuite/gas/riscv/zvknc.d: New test. * testsuite/gas/riscv/zvknc.s: New test. 2023-07-01 Nathan Huckleberry RISC-V: Add support for the Zvksg ISA extension Zvksg is part of the vector crypto extensions. Zvksg is shorthand for the following set of extensions: - Zvks - Zvkg bfd/ChangeLog: * elfxx-riscv.c: Define Zvksg extension. gas/ChangeLog: * testsuite/gas/riscv/zvksg.d: New test. * testsuite/gas/riscv/zvksg.s: New test. 2023-07-01 Christoph Müllner RISC-V: Add support for the Zvks ISA extension Zvks is part of the vector crypto extensions. Zvks is shorthand for the following set of extensions: - Zvksed - Zvksh - Zvbb - Zvkt bfd/ChangeLog: * elfxx-riscv.c: Define Zvks extension. gas/ChangeLog: * testsuite/gas/riscv/zvks.d: New test. * testsuite/gas/riscv/zvks.s: New test. 2023-07-01 Nathan Huckleberry RISC-V: Add support for the Zvkng ISA extension Zvkng is part of the vector crypto extensions. Zvkng is shorthand for the following set of extensions: - Zvkn - Zvkg bfd/ChangeLog: * elfxx-riscv.c: Define Zvkng extension. gas/ChangeLog: * testsuite/gas/riscv/zvkng.d: New test. * testsuite/gas/riscv/zvkng.s: New test. 2023-07-01 Nathan Huckleberry RISC-V: Allow nested implications for extensions Certain extensions require two levels of implications. For example, zvkng implies zvkn and zvkn implies zvkned. Enabling zvkng should also enable zvkned. This patch fixes this behavior. bfd/ChangeLog: * elfxx-riscv.c (riscv_parse_add_implicit_subsets): Allow nested implications for extensions. 2023-07-01 Christoph Müllner RISC-V: Add support for the Zvkn ISA extension Zvkn is part of the vector crypto extensions. Zvkn is shorthand for the following set of extensions: - Zvkned - Zvknhb - Zvbb - Zvkt bfd/ChangeLog: * elfxx-riscv.c: Define Zvkn extension. gas/ChangeLog: * testsuite/gas/riscv/zvkn.d: New test. * testsuite/gas/riscv/zvkn.s: New test. 2023-07-01 Christoph Müllner RISC-V: Add support for the Zvksh ISA extension Zvksh is part of the vector crypto extensions. This extension adds the following instructions: - vsm3me.vv - vsm3c.vi bfd/ChangeLog: * elfxx-riscv.c (riscv_multi_subset_supports): Add instruction class support for Zvksh. (riscv_multi_subset_supports_ext): Likewise. gas/ChangeLog: * testsuite/gas/riscv/zvksh.d: New test. * testsuite/gas/riscv/zvksh.s: New test. include/ChangeLog: * opcode/riscv-opc.h (MATCH_VSM3C_VI): New. (MASK_VSM3C_VI): New. (MATCH_VSM3ME_VV): New. (MASK_VSM3ME_VV): New. (DECLARE_INSN): New. * opcode/riscv.h (enum riscv_insn_class): Add instruction class support for Zvksh. opcodes/ChangeLog: * riscv-opc.c: Add Zvksh instructions. 2023-07-01 Christoph Müllner RISC-V: Add support for the Zvksed ISA extension Zvksed is part of the vector crypto extensions. This extension adds the following instructions: - vsm4k.vi - vsm4r.[vv,vs] bfd/ChangeLog: * elfxx-riscv.c (riscv_multi_subset_supports): Add instruction class support for Zvksed. (riscv_multi_subset_supports_ext): Likewise. gas/ChangeLog: * testsuite/gas/riscv/zvksed.d: New test. * testsuite/gas/riscv/zvksed.s: New test. include/ChangeLog: * opcode/riscv-opc.h (MATCH_VSM4K_VI): New. (MASK_VSM4K_VI): New. (MATCH_VSM4R_VS): New. (MASK_VSM4R_VS): New. (MATCH_VSM4R_VV): New. (MASK_VSM4R_VV): New. (DECLARE_INSN): New. * opcode/riscv.h (enum riscv_insn_class): Add instruction class support for Zvksed. opcodes/ChangeLog: * riscv-opc.c: Add Zvksed instructions. 2023-07-01 Christoph Müllner RISC-V: Add support for the Zvknh[a,b] ISA extensions Zvknh[a,b] are parts of the vector crypto extensions. This extension adds the following instructions: - vsha2ms.vv - vsha2c[hl].vv bfd/ChangeLog: * elfxx-riscv.c (riscv_multi_subset_supports): Add instruction class support for Zvknh[a,b]. (riscv_multi_subset_supports_ext): Likewise. gas/ChangeLog: * testsuite/gas/riscv/zvknha.d: New test. * testsuite/gas/riscv/zvknha_zvknhb.s: New test. * testsuite/gas/riscv/zvknhb.d: New test. include/ChangeLog: * opcode/riscv-opc.h (MATCH_VSHA2CH_VV): New. (MASK_VSHA2CH_VV): New. (MATCH_VSHA2CL_VV): New. (MASK_VSHA2CL_VV): New. (MATCH_VSHA2MS_VV): New. (MASK_VSHA2MS_VV): New. (DECLARE_INSN): New. * opcode/riscv.h (enum riscv_insn_class): Add instruction class support for Zvknh[a,b]. opcodes/ChangeLog: * riscv-opc.c: Add Zvknh[a,b] instructions. 2023-07-01 Christoph Müllner RISC-V: Add support for the Zvkned ISA extension Zvkned is part of the vector crypto extensions. This extension adds the following instructions: - vaesef.[vv,vs] - vaesem.[vv,vs] - vaesdf.[vv,vs] - vaesdm.[vv,vs] - vaeskf1.vi - vaeskf2.vi - vaesz.vs bfd/ChangeLog: * elfxx-riscv.c (riscv_multi_subset_supports): Add instruction class support for Zvkned. (riscv_multi_subset_supports_ext): Likewise. gas/ChangeLog: * testsuite/gas/riscv/zvkned.d: New test. * testsuite/gas/riscv/zvkned.s: New test. include/ChangeLog: * opcode/riscv-opc.h (MATCH_VAESDF_VS): New. (MASK_VAESDF_VS): New. (MATCH_VAESDF_VV): New. (MASK_VAESDF_VV): New. (MATCH_VAESDM_VS): New. (MASK_VAESDM_VS): New. (MATCH_VAESDM_VV): New. (MASK_VAESDM_VV): New. (MATCH_VAESEF_VS): New. (MASK_VAESEF_VS): New. (MATCH_VAESEF_VV): New. (MASK_VAESEF_VV): New. (MATCH_VAESEM_VS): New. (MASK_VAESEM_VS): New. (MATCH_VAESEM_VV): New. (MASK_VAESEM_VV): New. (MATCH_VAESKF1_VI): New. (MASK_VAESKF1_VI): New. (MATCH_VAESKF2_VI): New. (MASK_VAESKF2_VI): New. (MATCH_VAESZ_VS): New. (MASK_VAESZ_VS): New. (DECLARE_INSN): New. * opcode/riscv.h (enum riscv_insn_class): Add instruction class support for Zvkned. opcodes/ChangeLog: * riscv-opc.c: Add Zvkned instructions. 2023-07-01 Christoph Müllner RISC-V: Add support for the Zvkg ISA extension Zvkg is part of the vector crypto extensions. This extension adds the following instructions: - vghsh.vv - vgmul.vv bfd/ChangeLog: * elfxx-riscv.c (riscv_multi_subset_supports): Add instruction class support for Zvkg. (riscv_multi_subset_supports_ext): Likewise. gas/ChangeLog: * testsuite/gas/riscv/zvkg.d: New test. * testsuite/gas/riscv/zvkg.s: New test. include/ChangeLog: * opcode/riscv-opc.h (MATCH_VGHSH_VV): New. (MASK_VGHSH_VV): New. (MATCH_VGMUL_VV): New. (MASK_VGMUL_VV): New. (DECLARE_INSN): New. * opcode/riscv.h (enum riscv_insn_class): Add instruction class support for Zvkg. opcodes/ChangeLog: * riscv-opc.c: Add Zvkg instructions. 2023-07-01 Nathan Huckleberry RISC-V: Add support for the Zvbc extension Zvbc is part of the crypto vector extensions. This extension adds the following instructions: - vclmul.[vv,vx] - vclmulh.[vv,vx] bfd/ChangeLog: * elfxx-riscv.c (riscv_multi_subset_supports): Add instruction class support for Zvbc. (riscv_multi_subset_supports_ext): Likewise. gas/ChangeLog: * testsuite/gas/riscv/zvbc.d: New test. * testsuite/gas/riscv/zvbc.s: New test. include/ChangeLog: * opcode/riscv-opc.h (MATCH_VCLMUL_VV): New. (MASK_VCLMUL_VV): New. (MATCH_VCLMUL_VX): New. (MASK_VCLMUL_VX): New. (MATCH_VCLMULH_VV): New. (MASK_VCLMULH_VV): New. (MATCH_VCLMULH_VX): New. (MASK_VCLMULH_VX): New. (DECLARE_INSN): New. * opcode/riscv.h (enum riscv_insn_class): Add instruction class support for Zvbc. opcodes/ChangeLog: * riscv-opc.c: Add Zvbc instruction. 2023-07-01 Christoph Müllner RISC-V: Add support for the Zvbb ISA extension Zvbb is part of the vector crypto extensions. This extension adds the following instructions: - vandn.[vv,vx] - vbrev.v - vbrev8.v - vrev8.v - vclz.v - vctz.v - vcpop.v - vrol.[vv,vx] - vror.[vv,vx,vi] - vwsll.[vv,vx,vi] bfd/ChangeLog: * elfxx-riscv.c (riscv_multi_subset_supports): Add instruction class support for Zvbb. (riscv_multi_subset_supports_ext): Likewise. gas/ChangeLog: * config/tc-riscv.c (validate_riscv_insn): Add 'l' as new format string directive. (riscv_ip): Likewise. * testsuite/gas/riscv/zvbb.d: New test. * testsuite/gas/riscv/zvbb.s: New test. include/ChangeLog: * opcode/riscv-opc.h (MATCH_VANDN_VV): New. (MASK_VANDN_VV): New. (MATCH_VANDN_VX): New. (MASK_VANDN_VX): New. (MATCH_VBREV8_V): New. (MASK_VBREV8_V): New. (MATCH_VBREV_V): New. (MASK_VBREV_V): New. (MATCH_VCLZ_V): New. (MASK_VCLZ_V): New. (MATCH_VCPOP_V): New. (MASK_VCPOP_V): New. (MATCH_VCTZ_V): New. (MASK_VCTZ_V): New. (MATCH_VREV8_V): New. (MASK_VREV8_V): New. (MATCH_VROL_VV): New. (MASK_VROL_VV): New. (MATCH_VROL_VX): New. (MASK_VROL_VX): New. (MATCH_VROR_VI): New. (MASK_VROR_VI): New. (MATCH_VROR_VV): New. (MASK_VROR_VV): New. (MATCH_VROR_VX): New. (MASK_VROR_VX): New. (MATCH_VWSLL_VI): New. (MASK_VWSLL_VI): New. (MATCH_VWSLL_VV): New. (MASK_VWSLL_VV): New. (MATCH_VWSLL_VX): New. (MASK_VWSLL_VX): New. (DECLARE_INSN): New. * opcode/riscv.h (EXTRACT_RVV_VI_UIMM6): New. (ENCODE_RVV_VI_UIMM6): New. (enum riscv_insn_class): Add instruction class for Zvbb. opcodes/ChangeLog: * riscv-dis.c (print_insn_args): Add 'l' as new format string directive. * riscv-opc.c: Add Zvbb instructions. 2023-07-01 GDB Administrator Automatic date update in version.in 2023-06-30 Tom Tromey Fix regressions caused by agent expression C++-ification Simon pointed out that my agent expression C++-ification patches caused a regression with the native-gdbserver target board. The bug is that append_const is supposed to write in big-endian order, but I switched this by mistake. 2023-06-30 Philipp Tomsich binutils: NEWS: announce new RISC-V extensions We picked up support for a few new extensions over the last weeks (this may need further updating prior to the next release), list them in the NEWS file. binutils/ChangeLog: * binutils/NEWS: announce suuport for the new RISC-V extensions (Zicond, Zfa, XVentanaCondOps). 2023-06-30 Christoph Müllner RISC-V: Add support for the Zfa extension This patch adds support for the RISC-V Zfa extension, which introduces additional floating-point instructions: * fli (load-immediate) with pre-defined immediates * fminm/fmaxm (like fmin/fmax but with different NaN behaviour) * fround/froundmx (round to integer) * fcvtmod.w.d (Modular Convert-to-Integer) * fmv* to access high bits of FP registers in case XLEN < FLEN * fleq/fltq (quiet comparison instructions) Zfa defines its instructions in combination with the following extensions: * single-precision floating-point (F) * double-precision floating-point (D) * quad-precision floating-point (Q) * half-precision floating-point (Zfh) This patch is based on an earlier version from Tsukasa OI: https://sourceware.org/pipermail/binutils/2022-September/122939.html Most significant change to that commit is the switch from the rs1-field value to the actual floating-point value in the last operand of the fli* instructions. Everything that strtof() can parse is accepted and the '%a' printf specifier is used to output hex floating-point literals in the disassembly. The Zfa specification is frozen (and has passed public review). It is available as a chapter in "The RISC-V Instruction Set Manual: Volume 1": https://github.com/riscv/riscv-isa-manual/releases bfd/ChangeLog: * elfxx-riscv.c (riscv_multi_subset_supports): Add instruction class support for 'Zfa' extension. (riscv_multi_subset_supports_ext): Likewise. (riscv_implicit_subsets): Add 'Zfa' -> 'F' dependency. gas/ChangeLog: * config/tc-riscv.c (flt_lookup): New helper to lookup a float value in an array. (validate_riscv_insn): Add 'Wfv' as new format string directive. (riscv_ip): Likewise. * doc/c-riscv.texi: Add floating-point chapter and describe limiations of the Zfa FP literal parsing. * testsuite/gas/riscv/zfa-32.d: New test. * testsuite/gas/riscv/zfa-32.s: New test. * testsuite/gas/riscv/zfa-64.d: New test. * testsuite/gas/riscv/zfa-64.s: New test. * testsuite/gas/riscv/zfa-fail.d: New test. * testsuite/gas/riscv/zfa-fail.l: New test. * testsuite/gas/riscv/zfa-fail.s: New test. * testsuite/gas/riscv/zfa.d: New test. * testsuite/gas/riscv/zfa.s: New test. * testsuite/gas/riscv/zfa.s: New test. * opcode/riscv-opc.h (MATCH_FLI_H): New. (MASK_FLI_H): New. (MATCH_FMINM_H): New. (MASK_FMINM_H): New. (MATCH_FMAXM_H): New. (MASK_FMAXM_H): New. (MATCH_FROUND_H): New. (MASK_FROUND_H): New. (MATCH_FROUNDNX_H): New. (MASK_FROUNDNX_H): New. (MATCH_FLTQ_H): New. (MASK_FLTQ_H): New. (MATCH_FLEQ_H): New. (MASK_FLEQ_H): New. (MATCH_FLI_S): New. (MASK_FLI_S): New. (MATCH_FMINM_S): New. (MASK_FMINM_S): New. (MATCH_FMAXM_S): New. (MASK_FMAXM_S): New. (MATCH_FROUND_S): New. (MASK_FROUND_S): New. (MATCH_FROUNDNX_S): New. (MASK_FROUNDNX_S): New. (MATCH_FLTQ_S): New. (MASK_FLTQ_S): New. (MATCH_FLEQ_S): New. (MASK_FLEQ_S): New. (MATCH_FLI_D): New. (MASK_FLI_D): New. (MATCH_FMINM_D): New. (MASK_FMINM_D): New. (MATCH_FMAXM_D): New. (MASK_FMAXM_D): New. (MATCH_FROUND_D): New. (MASK_FROUND_D): New. (MATCH_FROUNDNX_D): New. (MASK_FROUNDNX_D): New. (MATCH_FLTQ_D): New. (MASK_FLTQ_D): New. (MATCH_FLEQ_D): New. (MASK_FLEQ_D): New. (MATCH_FLI_Q): New. (MASK_FLI_Q): New. (MATCH_FMINM_Q): New. (MASK_FMINM_Q): New. (MATCH_FMAXM_Q): New. (MASK_FMAXM_Q): New. (MATCH_FROUND_Q): New. (MASK_FROUND_Q): New. (MATCH_FROUNDNX_Q): New. (MASK_FROUNDNX_Q): New. (MATCH_FLTQ_Q): New. (MASK_FLTQ_Q): New. (MATCH_FLEQ_Q): New. (MASK_FLEQ_Q): New. (MATCH_FCVTMOD_W_D): New. (MASK_FCVTMOD_W_D): New. (MATCH_FMVH_X_D): New. (MASK_FMVH_X_D): New. (MATCH_FMVH_X_Q): New. (MASK_FMVH_X_Q): New. (MATCH_FMVP_D_X): New. (MASK_FMVP_D_X): New. (MATCH_FMVP_Q_X): New. (MASK_FMVP_Q_X): New. (DECLARE_INSN): New. * opcode/riscv.h (enum riscv_insn_class): Add instruction classes for the Zfa extension. opcodes/ChangeLog: * riscv-dis.c (print_insn_args): Add support for new format string directive 'Wfv'. * riscv-opc.c: Add Zfa instructions. Co-Developed-by: Tsukasa OI Co-Developed-by: Philipp Tomsich Acked-by: Palmer Dabbelt 2023-06-30 Nick Clifton strings: Improve code to detect excessively large minimum string lengths. PR 30598 * strings.c (set_string_min): New function. (main): Use it. (print_unicode_stream): Calculate buffer size using a size_t. Prevent an illegal memory access when running the strings program with an excessively lerge minimum string length. PR 30595 * strings.c (main): Check for an excessively large minimum string length. Fix used-before-initialized warnings when compiling elf.c with Clang-16. 2023-06-30 mengqinggang LoongArch: gas: Fix code style issues Blocks of 8 spaces be replaced with tabs. Fix alignment issues. 2023-06-30 mengqinggang LoongArch: gas: Add LVZ and LBT instructions support gas/ChangeLog: * config/tc-loongarch.c (md_parse_option): Add LARCH_opts.ase_lvz and LARCH_opts.ase_lbt. * testsuite/gas/loongarch/uleb128.d: Regenerated. * testsuite/gas/loongarch/lvz-lbt.d: New test. * testsuite/gas/loongarch/lvz-lbt.s: New test. include/ChangeLog: * opcode/loongarch.h (ase_lvz): New. (ase_lbt): New. opcodes/ChangeLog: * loongarch-dis.c (set_default_loongarch_dis_options): Add LARCH_opts.ase_lvz and LARCH_opts.ase_lbt. * loongarch-opc.c (struct loongarch_ase): Add LVZ and LBT instructions. 2023-06-30 WANG Xuerui LoongArch: Deprecate $v[01], $fv[01] and $x names per spec As outlined in the LoongArch ELF psABI spec [1], it is actually already 2 versions after the initial LoongArch support, and the $v[01] and $fv[01] names should really get sunset by now. In addition, the "$x" name for $r21 was never included in any released version of the ABI spec, and such usages are all fixed to say just $r21 for every project I could think of that accepted a LoongArch port. Plus, the upcoming LSX/LASX support makes use of registers named "$vrNN" and "$xrNN", so having "$vN" and "$x" alongside would almost certainly create confusion for developers. Issue warnings for such usages per the deprecation procedure detailed in the spec, so we can finally remove support in the next release cycle after this. [1]: https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html gas/ChangeLog: * config/tc-loongarch.c: Init canonical register ABI name mappings and deprecated register names. (loongarch_args_parser_can_match_arg_helper): Warn in case of deprecated register name usage. * testsuite/gas/loongarch/deprecated_reg_aliases.d: New test. * testsuite/gas/loongarch/deprecated_reg_aliases.l: Likewise. * testsuite/gas/loongarch/deprecated_reg_aliases.s: Likewise. include/ChangeLog: * opcode/loongarch.h: Rename global variables. opcodes/ChangeLog: * loongarch-opc.c: Rename the alternate/deprecated register name mappings, and move $x to the deprecated name map. 2023-06-30 WANG Xuerui opcodes/loongarch: print unrecognized insn words with the .word directive For better round-trip fidelity and readability in general. gas/ChangeLog: * testsuite/gas/loongarch/uleb128.d: Update test case. * testsuite/gas/loongarch/raw-insn.d: New test. * testsuite/gas/loongarch/raw-insn.s: Likewise. opcodes/ChangeLog: * loongarch-dis.c (disassemble_one): Print ".word" if !opc. 2023-06-30 WANG Xuerui opcodes/loongarch: do not print hex notation for signed immediates The additional hex notation was minimally useful when one had to inspect code with heavy bit manipulation, or of unclear signedness, but it clutters the output, and the style is not regular assembly language syntax either. Precisely how one approaches the original use case is not taken care of in this patch (maybe we want a disassembler option forcing a certain style for immediates, like for example printing every immediate in decimal or hexadecimal notation), but at least let's stop the current practice. ChangeLog: * testsuite/gas/loongarch/imm_ins.d: Update test case. * testsuite/gas/loongarch/imm_ins_32.d: Likewise. * testsuite/gas/loongarch/imm_op.d: Likewise. * testsuite/gas/loongarch/jmp_op.d: Likewise. * testsuite/gas/loongarch/load_store_op.d: Likewise. * testsuite/gas/loongarch/macro_op.d: Likewise. * testsuite/gas/loongarch/macro_op_32.d: Likewise. * testsuite/gas/loongarch/privilege_op.d: Likewise. * testsuite/gas/loongarch/uleb128.d: Likewise. * testsuite/gas/loongarch/vector.d: Likewise. ld/ChangeLog: * testsuite/ld-loongarch-elf/jmp_op.d: Update test case. * testsuite/ld-loongarch-elf/macro_op.d: Likewise. * testsuite/ld-loongarch-elf/macro_op_32.d: Likewise. opcodes/ChangeLog: * loongarch-dis.c (dis_one_arg): Remove the "(0x%x)" part from disassembly output of signed immediate operands. 2023-06-30 WANG Xuerui opcodes/loongarch: style disassembled address offsets as such Add a modifier char 'o' telling the disassembler to print the immediate using the address offset style, and mark the memory access instructions' offset operands as such. opcodes/ChangeLog: * loongarch-dis.c (dis_one_arg): Style disassembled address offsets as such when the operand has a modifier char 'o'. * loongarch-opc.c: Add 'o' to operands that represent address offsets. 2023-06-30 WANG Xuerui opcodes/loongarch: implement style support in the disassembler Update the LoongArch disassembler to supply style information to the disassembler output. The output formatting remains unchanged. opcodes/ChangeLog: * disassemble.c: Mark LoongArch as created_styled_output=true. * loongarch-dis.c (dis_one_arg): Use fprintf_styled_func throughout with proper styles. 2023-06-30 WANG Xuerui opcodes/loongarch: remove unused code Remove some unused declarations and code. include/ChangeLog: * opcode/loongarch.h: Remove unused declarations. opcodes/ChangeLog: * loongarch-dis.c (loongarch_parse_dis_options): Remove. (my_print_address_func): Likewise. (loongarch_disassemble_one): Likewise. 2023-06-30 WANG Xuerui LoongArch: support disassembling certain pseudo-instructions Add a flag in the pinfo field for being able to mark certain specialized matchers as disassembler-only, so some degree of isolation between assembler-side and disassembler-side can be achieved. This isolation is necessary, firstly because some pseudo-instructions cannot be fully described in the opcode table, like `li.[wd]`, so the corresponding opcode entry cannot have meaningful match/mask values. Secondly, some of these pseudo-instructions can be realized in more than one plausible ways; e.g. `li.w rd, ` can be realized on LA64 with any of `addi.w`, `addi.d` or `ori`. If we tie disassembly of such aliases with the corresponding GAS support, only one canonical form among the above would be recognized as `li.w`, and it would mildly impact the readability of disassembly output. People wanting the exact disassembly can always set `-M no-aliases` to get the original behavior back. In addition, in certain cases, information is irreversibly lost after assembling, so perfect round-trip would not be possible in such cases. For example, `li.w` and `li.d` of immediates within int32_t range produce the same code; in this patch, `addi.d rd, $zero, imm` is treated as `li.d`, while `addi.w` and `ori` immediate loads are shown as `li.w`, due to the expressible value range well within 32 bits. gas/ChangeLog: * config/tc-loongarch.c (get_loongarch_opcode): Ignore disassembler-only aliases. * testsuite/gas/loongarch/64_pcrel.d: Update test case. * testsuite/gas/loongarch/imm_ins.d: Likewise. * testsuite/gas/loongarch/imm_ins_32.d: Likewise. * testsuite/gas/loongarch/jmp_op.d: Likewise. * testsuite/gas/loongarch/li.d: Likewise. * testsuite/gas/loongarch/macro_op.d: Likewise. * testsuite/gas/loongarch/macro_op_32.d: Likewise. * testsuite/gas/loongarch/macro_op_large_abs.d: Likewise. * testsuite/gas/loongarch/macro_op_large_pc.d: Likewise. * testsuite/gas/loongarch/nop.d: Likewise. * testsuite/gas/loongarch/relax_align.d: Likewise. * testsuite/gas/loongarch/reloc.d: Likewise. include/ChangeLog: * opcode/loongarch.h (INSN_DIS_ALIAS): Add. ld/ChangeLog: * testsuite/ld-loongarch-elf/jmp_op.d: Update test case. * testsuite/ld-loongarch-elf/macro_op.d: Likewise. * testsuite/ld-loongarch-elf/macro_op_32.d: Likewise. * testsuite/ld-loongarch-elf/relax-align.dd: Likewise. opcodes/ChangeLog: * loongarch-dis.c: Move register name map declarations to top. (get_loongarch_opcode_by_binfmt): Consider aliases when disassembling without the no-aliases option. (parse_loongarch_dis_option): Support the no-aliases option. * loongarch-opc.c: Collect pseudo instructions into a new dedicated table. 2023-06-30 GDB Administrator Automatic date update in version.in 2023-06-30 Indu Bhagat binutils/NEWS: announce SFrame version 2 as the new default 2023-06-30 Indu Bhagat doc: sframe: update specification for SFRAME_VERSION_2 Add details for the changes made from Version 1 to Version 2 of the format. Also add details about alignment in the SFrame format. A portion of the SFrame stack trace format has an unaligned on-disk representation. Add description at relevant points in the specificatin to clarify the alignment related details. 2023-06-30 Indu Bhagat sframe: bfd: gas: ld: format bump to SFrame version 2 SFrame version 2 encodes the size of repetitive insn block explicitly in the format. Add information in the SFrame FDE to convey the size of the block of repeating instructions. This information is used only for SFrame FDEs of type SFRAME_FDE_TYPE_PCMASK. Introduce two extra bytes for padding: this ensures that the memory accesses to the members of the SFrame Frame Descriptor Entry (FDE) are naturally aligned. gas generates SFrame section with version SFRAME_VERSION_2 by default. libsframe provides two new APIs to: - get an SFrame FDE data from the decoder context, and - add an SFrame FDE to the encoder context. The additional argument (for rep_block_size) is useful for SFrame FDEs where FDE type is SFRAME_FDE_TYPE_PCMASK. The linker will generate the output SFrame sections in the SFRAME_VERSION_2 format. If the input sections offered to the linker are not all in the SFRAME_VERSION_2 format, the linker issues an error to the user. objdump/readelf will show the following message to the user if .sframe section in SFRAME_VERSION_1 format is seen: "No further information can be displayed. SFrame version not supported." In other words, like the rest of the binutils, only the current SFrame format version, i.e., SFRAME_VERSION_2 is supported by the textual dump facilities. bfd/ * elf-sframe.c (_bfd_elf_merge_section_sframe): Generate an output SFrame section with version SFRAME_VERSION_2. Also, error out if the SFrame sections do not all have SFRAME_VERSION_2. * elfxx-x86.c (_bfd_x86_elf_create_sframe_plt): Generate SFrame section for plt entries with version SFRAME_VERSION_2. gas/ * gen-sframe.c (sframe_set_version): Update to SFRAME_VERSION_2. (output_sframe): Likewise. gas/testsuite/ * gas/cfi-sframe/cfi-sframe-aarch64-1.d: Use SFRAME_VERSION_2. * gas/cfi-sframe/cfi-sframe-aarch64-2.d: Likewise. * gas/cfi-sframe/cfi-sframe-aarch64-pac-ab-key-1.d: Likewise. * gas/cfi-sframe/cfi-sframe-common-1.d: Likewise. * gas/cfi-sframe/cfi-sframe-common-2.d: Likewise. * gas/cfi-sframe/cfi-sframe-common-3.d: Likewise. * gas/cfi-sframe/cfi-sframe-common-4.d: Likewise. * gas/cfi-sframe/cfi-sframe-common-5.d: Likewise. * gas/cfi-sframe/cfi-sframe-common-6.d: Likewise. * gas/cfi-sframe/cfi-sframe-common-7.d: Likewise. * gas/cfi-sframe/cfi-sframe-common-8.d: Likewise. * gas/cfi-sframe/cfi-sframe-x86_64-1.d: Likewise. * gas/cfi-sframe/common-empty-1.d: Likewise. * gas/cfi-sframe/common-empty-2.d: Likewise. * gas/cfi-sframe/common-empty-3.d: Likewise. ld/testsuite/ * ld-aarch64/sframe-simple-1.d: Adjust for SFRAME_VERSION_2. * ld-x86-64/sframe-plt-1.d: Likewise. * ld-x86-64/sframe-simple-1.d: Likewise. libsframe/ * libsframe.ver: Add the new APIs. * sframe.c (sframe_decoder_get_funcdesc_v2): New definition. (sframe_encoder_add_funcdesc_v2): Likewise. (sframe_header_sanity_check_p): Include SFRAME_VERSION_2. (sframe_fre_check_range_p): Get rep_block_size info from SFrame FDE. * sframe-dump.c (dump_sframe_header): Add support for SFRAME_VERSION_2. (dump_sframe): Inform user if SFrame section in SFRAME_VERSION_1 format is seen. libsframe/testsuite/ * libsframe.decode/DATA-BE: Regenerated data file. * libsframe.decode/DATA1: Likewise. * libsframe.decode/DATA2: Likewise. * libsframe.find/plt-findfre-1.c: Use new API in the testcase. include/ * sframe.h: Add member to encode size of the code block of repeating instructions. Add 2 bytes of padding. * sframe-api.h (sframe_decoder_get_funcdesc_v2): New declaration. (sframe_encoder_add_funcdesc_v2): Likewise. 2023-06-30 Indu Bhagat libsframe: add new APIs to get SFrame version While the SFrame preamble is guaranteed to not change between versions, providing these access APIs from the SFrame decoder and encoder APIs is for convenience only. The linker may want to use these APIs as the format evolves. include/ * sframe-api.h (sframe_decoder_get_version): New declaration. (sframe_encoder_get_version): Likewise. libsframe/ * libsframe/libsframe.ver: Add new APIs. * libsframe/sframe.c (sframe_decoder_get_version): New definition. (sframe_encoder_get_version): Likewise. 2023-06-29 Indu Bhagat libsframe: fix sframe_find_fre for pltN entries For a toy application on x86_64, for example, following is the SFrame stack trace information for the 3 pltN entries of 16 bytes each: func idx [1]: pc = 0x401030, size = 48 bytes STARTPC[m] CFA FP RA 0000000000000000 sp+8 u u 000000000000000b sp+16 u u The data in first column is the start_ip_offset. Also note that the FDE is of type SFRAME_FDE_TYPE_PCMASK (denoted by the [m] on LHS). Where each pltN (note: excluding plt0 entry) entry looks like: 401030: jmp *0x2fca(%rip) 401036: push $0x0 40103b: jmp 401020<_init+0x20> 401040: jmp *0x2fc2(%rip) 401046: push $0x1 40104b: jmp 401020<_init+0x20> 401050: jmp *0x2fba(%rip) 401056: push $0x2 40105b: jmp 401020<_init+0x20> Now, to find SFrame stack trace information from an FDE of type SFRAME_FDE_TYPE_PCMASK, sframe_find_fre () was doing an operation like, (start_ip_offset & 0xf) >= (pc & 0xf) This works for pltN entry of size, say, less than 16 bytes. But if the pltN entries or similar code stubs (for which SFrame FDE of type SFRAME_FDE_TYPE_PCMASK may be used), evolve to be of size > 16 bytes, this will cease to work. To match the range covered by the SFrame FRE, one should instead perform a modulo operation. The constant for the modulo operation must be the size of the pltN entry. Further, this constant should ideally be encoded in the format, as it may be different for each ABI. In SFrame Version 2 of the format, we will move towards encoding it explicitly in the SFrame FDE. For now, fix up the logic to at least move towards modulo operation. libsframe/ * sframe.c (sframe_fre_check_range_p): New definition. (sframe_find_fre): Refactor a bit and use the new definition above. include/ * sframe.h (SFRAME_FDE_TYPE_PCMASK): Update comment. libsframe/doc/ * sframe-spec.texi: Fix the text for SFRAME_FDE_TYPE_PCMASK FDE type. 2023-06-29 H.J. Lu ld: Add -z nosectionheader test to bootstrap.exp PR ld/25617 * testsuite/ld-bootstrap/bootstrap.exp: Add -z nosectionheader test. 2023-06-29 H.J. Lu ld: Add tests for -z nosectionheader and --strip-section-headers Add tests to verify that the linker option, -z nosectionheader and objcopy and strip option, --strip-section-headers, work correctly as well as linker issues an error when dynamic symbol table from PT_DYNAMIC segment is used. PR ld/25617 * testsuite/ld-elf/hash-2.d: New file. * testsuite/ld-elf/no-section-header.exp: Likewise. * testsuite/ld-elf/pr25617-1-no-sec-hdr.nd: Likewise. * testsuite/ld-elf/pr25617-1-no-sec-hdr.rd: Likewise. * testsuite/ld-elf/pr25617-1-static-no-sec-hdr.rd: Likewise. * testsuite/ld-elf/pr25617-1a-no-sec-hdr.nd: Likewise. * testsuite/ld-elf/pr25617-1a-no-sec-hdr.rd: Likewise. * testsuite/ld-elf/pr25617-1a-sec-hdr.rd: Likewise. * testsuite/ld-elf/pr25617-1a.c: Likewise. * testsuite/ld-elf/pr25617-1b.c: Likewise. * testsuite/ld-elf/start-noheader.rd: Likewise. * testsuite/ld-elf/start-shared-noheader-gnu.rd: Likewise. * testsuite/ld-elf/start-shared-noheader-sysv.rd: Likewise. * testsuite/ld-elf/start-shared-noheader.nd: Likewise. 2023-06-29 H.J. Lu binutils: Add a --strip-section-headers test PR ld/25617 * testsuite/binutils-all/objcopy.exp: Run strip-section-headers-1. * testsuite/binutils-all/strip-section-headers-1.d: New file. 2023-06-29 Kaylee Blake ld: Add simple tests for -z nosectionheader 2020-06-06 Kaylee Blake H.J. Lu PR ld/25617 * testsuite/ld-elf/nosectionheader-1.d: New file. * testsuite/ld-elf/nosectionheader-2.d: Likewise. 2023-06-29 H.J. Lu bfd: Improve nm and objdump without section header When there is no section header in an executable or shared library, we reconstruct dynamic symbol table from the PT_DYNAMIC segment, which contains DT_HASH/DT_GNU_HASH/DT_MIPS_XHASH, DT_STRTAB, DT_SYMTAB, DT_STRSZ, and DT_SYMENT entries, to improve nm and objdump. For DT_HASH, the number of dynamic symbol table entries equals the number of chains. For DT_GNU_HASH/DT_MIPS_XHASH, only defined symbols with non-STB_LOCAL indings are in hash table. Since DT_GNU_HASH/DT_MIPS_XHASH place all symbols with STB_LOCAL binding before symbols with other bindings and all undefined symbols defined ones in dynamic symbol table, the highest symbol index in DT_GNU_HASH/DT_MIPS_XHASH is the highest dynamic symbol table index. We can also get symbol version from DT_VERSYM, DT_VERDEF and DT_VERNEED entries. dt_symtab, dt_versym, dt_verdef, dt_verneed, dt_symtab_count, dt_verdef_count, dt_verneed_count and dt_strtab are added to elf_obj_tdata to store dynamic symbol table information. PR ld/25617 * elf-bfd.h (elf_obj_tdata): Add dt_symtab, dt_verdef, dt_verneed, dt_symtab_count, dt_verdef_count, dt_verneed_count and dt_strtab. (elf_use_dt_symtab_p): New. (_bfd_elf_get_dynamic_symbols): Likewise. (_bfd_elf_get_section_from_dynamic_symbol): Likewise. * elf.c (bfd_elf_get_elf_syms): Use dynamic symbol table if neeeded. (_bfd_elf_get_dynamic_symtab_upper_bound): Likewise. (_bfd_elf_slurp_version_tables): Likewise. (offset_from_vma): New function. (get_hash_table_data): Likewise. (_bfd_elf_get_dynamic_symbols): Likewise. (_bfd_elf_get_section_from_dynamic_symbol): Likewise. (_bfd_elf_get_symbol_version_name): Likewise. * elfcode.h (elf_object_p): Call _bfd_elf_get_dynamic_symbols to reconstruct dynamic symbol table from PT_DYNAMIC segment if there is no section header. (elf_slurp_symbol_table): Use dynamic symbol table if neeeded. Don't free isymbuf when dynamic symbol table is used. * elflink.c (elf_link_is_defined_archive_symbol): Return wrong format error when dynamic symbol table is used. (elf_link_add_object_symbols): Likewise. 2023-06-29 H.J. Lu ELF: Discard non-alloc sections without section header Discard non-alloc sections when section headers are stripped. bfd/ PR ld/25617 * elf.c (_bfd_elf_assign_file_positions_for_non_load): Skip non-load sections without section header. (_bfd_elf_write_object_contents): Don't set the sh_name field without section header. Write out the .shstrtab section only if its sh_offset field isn't -1. binutils/ PR ld/25617 * objcopy.c (is_strip_section_1): Remove non-alloc sections for --strip-section-headers. ld/ PR ld/25617 * ldlang.c (lang_discard_section_p): Discard non-alloc sections if we are stripping section headers. 2023-06-29 Kaylee Blake ELF: Strip section header in ELF objects Section header isn't mandatory on ELF executable nor shared library. This patch adds a new linker option, -z nosectionheader, to omit ELF section header, a new objcopy and strip option, --strip-section-headers, to remove ELF section headers. bfd/ 2023-06-06 H.J. Lu Kaylee Blake PR ld/25617 * bfd.c (BFD_NO_SECTION_HEADER): New. (BFD_FLAGS_SAVED): Add BFD_NO_SECTION_HEADER. (BFD_FLAGS_FOR_BFD_USE_MASK): Likewise. * elfcode.h (elf_swap_ehdr_out): Omit section header with BFD_NO_SECTION_HEADER. (elf_write_shdrs_and_ehdr): Likewise. * elfxx-target.h (TARGET_BIG_SYM): Add BFD_NO_SECTION_HEADER to object_flags. (TARGET_LITTLE_SYM): Likewise. * bfd-in2.h: Regenerated. binutils/ 2023-06-06 H.J. Lu PR ld/25617 * NEWS: Mention --strip-section-headers for objcopy and strip. * objcopy.c (strip_section_headers): New. (command_line_switch): Add OPTION_STRIP_SECTION_HEADERS. (strip_options): Add --strip-section-headers. (copy_options): Likewise. (copy_usage): Add --strip-section-headers. (strip_usage): Likewise. (copy_object): Handle --strip-section-headers for ELF files. (strip_main): Handle OPTION_STRIP_SECTION_HEADERS. (copy_main): Likewise. * doc/binutils.texi: Document --strip-section-headers for objcopy and strip. ld/ 2023-06-06 H.J. Lu Kaylee Blake PR ld/25617 * NEWS: Mention -z nosectionheader. * emultempl/elf.em: Support -z sectionheader and -z nosectionheader. * ld.h (ld_config_type): Add no_section_header. * ld.texi: Document -z sectionheader and -z nosectionheader. * ldlang.c (ldlang_open_output): Handle config.no_section_header. * lexsup.c (parse_args): Enable --strip-all with -z nosectionheader. Disallow -r with -z nosectionheader. (elf_static_list_options): Add -z sectionheader and -z nosectionheader. 2023-06-29 Matthias Klose Ignore --prefix-file-map compiler option whist running testsuite. ignore lto-wrapper warnings for lto builds. I see these warnings from time to time, when configuring a build with --enable-pgo-build=lto, I haven't yet found out why I see these sometime, and why not. E.g. https://gcc.gnu.org/PR109241. Just ignore these when they appear in test cases. lto-wrapper: warning: using serial compilation of N LTRANS jobs 2023-06-29 GDB Administrator Automatic date update in version.in 2023-06-28 Vladimir Mezentsev gprofng: Add new tests gprofng/ChangeLog 2023-06-26 Vladimir Mezentsev * Makefile.am: Pass CLOCK_GETTIME_LINK to the testsuite * Makefile.in: Rebuild. * testsuite/gprofng.display/gp-archive.exp: New file. * testsuite/gprofng.display/gp-collect-app_F.exp: New file. * testsuite/gprofng.display/setpath_map.exp: New file. * testsuite/lib/smalltest.c: New file. 2023-06-28 Andrew Carlotti aarch64: Remove version dependencies from features Many instructions were enabled only when both a feature flag and a minimum architecture version are specified. This behaviour differs from GCC, which (in most cases) allows features to be enabled at any architecture version. There is no need for the toolchain to restrict combinations of unrelated features in this way, so this patch removes the unnecessary dependencies. 2023-06-28 Tom Tromey Remove Python 2 from gdb documentation GDB can't be built using Python 2 any more, so remove the remaining vestiges of this from the documentation. Approved-By: Eli Zaretskii 2023-06-28 Michael Matz section-match: Check parent archive name as well rewriting the section matching routines lost a special case of matching: section statements of the form NAME(section-glob) normally match against NAME being an object file, but like in the exclude list we happened to accept archive names as NAME (undocumented). The documented way to specify (all) archive members is by using e.g. lib.a:(section-glob) (that does work also with the prefix tree matcher). But I intended to not actually change behaviour with the prefix tree implementation. So, let's also implement checking against archive names with a similar FIXME comment we already have in walk_wild_file_in_exclude_list. PR 30590 ld/ * ldlang.c (walk_wild_section_match): Also look at archive parents for a name match. 2023-06-28 Tom Tromey Fix handling of DW_TAG_unspecified_type for Ada Commit 80eaec735e ("[gdb/symtab] Handle named DW_TAG_unspecified_type DIE") changed the handling of DW_TAG_unspecified_type. Before this change, such types were not entered into the symbol table. It turns out that, when such a type is in the symtab, it can cause failures in Ada. In particular, a private type in another package may be seen locally as "void". Now, it would probably be better to fix this via check_typedef. However, that is somewhat difficult given the state of the DWARF reader -- in particular with gdb_index, this would require expanding potentially many CUs to find the correct type. Instead, this patch changes gdb to not enter a symbol for an unspecified type -- but only for Ada. 2023-06-28 Tom Tromey Remove some Python 2 code I found some Python 2 compatibility code in gdb's Python library. There's no need for this any more, so this removes it. There is still a bit more of this remaining in __init__.py, but I haven't tried removing that yet. Reviewed-By: Bruno Larsen 2023-06-28 Nick Clifton Stop the linker's --dependency-file option from including temporary lto files. PR 30568 * ldfile.c (ldfile_try_open_bfd): Do not track lto generated temporary files. Updated French translation for the gold sub-directory 2023-06-28 mengqinggang LoongArch: gas: Add LSX and LASX instructions test gas/ChangeLog: * testsuite/gas/loongarch/vector.d: New test. * testsuite/gas/loongarch/vector.s: New test. 2023-06-28 mengqinggang LoongArch: gas: Add lsx and lasx instructions support gas/ChangeLog: * config/tc-loongarch.c (md_parse_option): Add lsx and lasx option. (loongarch_after_parse_args): Add lsx and lasx option. opcodes/ChangeLog: * loongarch-opc.c (struct loongarch_ase): Add lsx and lasx instructions. 2023-06-28 mengqinggang LoongArch: Add R_LARCH_64_PCREL relocation support Gas defaults to emit R_LARCH_ADD64/R_LARCH_SUB64 unless explcitly declared to emit R_LARCH_64_PCREL. The LoongArch ABI at here: https://github.com/loongson/la-abi-specs/blob/release/la-abi.adoc bfd/ChangeLog: * bfd-in2.h (not): Add R_LARCH_64_PCREL * elfnn-loongarch.c (perform_relocation): Likewise. * elfxx-loongarch.c: Likewise. * libbfd.h: Likewise. * reloc.c: Likewise. gas/ChangeLog: * config/tc-loongarch.c (loongarch_args_parser_can_match_arg_helper): (md_apply_fix): Add R_LARCH_64_PCREL. * testsuite/gas/loongarch/64_pcrel.d: New test. * testsuite/gas/loongarch/64_pcrel.s: New test. include/ChangeLog: * elf/loongarch.h (RELOC_NUMBER): Add R_LARCH_64_PCREL. ld/ChangeLog: * testsuite/ld-loongarch-elf/ld-loongarch-elf.exp: Add test. * testsuite/ld-loongarch-elf/64_pcrel.d: New test. * testsuite/ld-loongarch-elf/64_pcrel.s: New test. 2023-06-28 GDB Administrator Automatic date update in version.in 2023-06-27 Indu Bhagat binutils/NEWS: add note about upcoming libsframe changes Some of these changes update the ABI in an incompatible way. 2023-06-27 Indu Bhagat libsframe: bfd: use uint32_t for return type of get_num_fidx APIs Keep the data types usage in libsframe look consistent. bfd/ * elf-sframe.c (_bfd_elf_merge_section_sframe): Use uint32_t type alias. * libsframe/sframe.c (sframe_decoder_get_funcdesc_at_index): Likewise. (sframe_decoder_get_num_fidx): Likewise. (sframe_encoder_get_num_fidx): Likewise. include/ * sframe-api.h (sframe_decoder_get_num_fidx): Likewise. (sframe_encoder_get_num_fidx): Likewise. 2023-06-27 Indu Bhagat libsframe: use appropriate data types for args of sframe_encode include/ * sframe-api.h (sframe_encode): Use of uint8_t is more appropriate. libsframe/ * sframe.c (sframe_encode): Likewise. 2023-06-27 Indu Bhagat libsframe: use uint8_t for return type of sframe_fre_get_base_reg_id Use a more appropriate data type. include/ * sframe-api.h (sframe_fre_get_base_reg_id): Use uint8_t as return type. libsframe/ * sframe-dump.c (dump_sframe_func_with_fres): Use uint8_t type for base reg id. * sframe.c (sframe_fre_get_base_reg_id): Use uin8_t as return type. 2023-06-27 Indu Bhagat libsframe: use uint8_t instead of unsigned char for abi_arch Use uint8_t consistently for identifying ABI/arch in SFrame format. bfd/ * elf-sframe.c (_bfd_elf_merge_section_sframe): libsframe/ * sframe-dump.c (is_sframe_abi_arch_aarch64): Use uint8_t for local variable. * sframe.c (sframe_decoder_get_abi_arch): Update return type to uint8_t. (sframe_encoder_get_abi_arch): Likewise. include/ * sframe-api.h (sframe_decoder_get_abi_arch): Likewise. (sframe_encoder_get_abi_arch): Likewise. 2023-06-27 Indu Bhagat libsframe: bfd: use uint32_t for return type of sframe_calc_fre_type Use uint32_t type alias consistently for all APIs in libsframe. bfd/ * elfxx-x86.c (_bfd_x86_elf_create_sframe_plt): Adjust for the changed return type. libsframe/ * sframe.c (sframe_calc_fre_type): Use uint32_t for return type. include/ * sframe-api.h (sframe_calc_fre_type): Likewise. 2023-06-27 Indu Bhagat libsframe: use uint32_t for fre_type and fde_type function args The API sframe_fde_create_func_info is provided by libsframe. Current users are the bfd linker. Adjust the argument type for the variables carrying the SFrame FRE type and SFrame FDE type to consistenly use uint32_t type alias. include/ * sframe-api.h (sframe_fde_create_func_info): Use uint32_t instead of unsigned int. libsframe/ * sframe.c (sframe_get_fre_type): Likewise. (sframe_get_fde_type): Likewise. (flip_fre_start_address): Likewise. (sframe_fre_start_addr_size): Likewise. (sframe_fre_entry_size): Likewise. (flip_fre): Likewise. (flip_sframe): Likewise. (sframe_fde_create_func_info): Likewise. (sframe_calc_fre_type): Likewise. (sframe_decode_fre_start_address): Likewise. (sframe_decode_fre): Likewise. (sframe_find_fre): Likewise. (sframe_decoder_get_fre): Likewise. (sframe_encoder_add_fre): Likewise. (sframe_encoder_write_fre_start_addr): Likewise. (sframe_encoder_write_fre): Likewise. (sframe_encoder_write_sframe): Likewise. 2023-06-27 Indu Bhagat libsframe: update the semantics of sframe_fre_get_fp_offset Until now, sframe_fre_get_fp_offset () would return SFRAME_ERR_FREOFFSET_NOPRESENT if the ABI uses fixed FP offset. A stack tracer, then, would call an explicit sframe_decoder_get_fixed_fp_offset () to get the FP offset. On second look, it appears to make sense to hide these details of whether the FP offset is fixed or not in an ABI from the consumer. Now, with the changed semantics, the call to sframe_fre_get_fp_offset () will fetch the fixed FP offset if applicable, or get the FP offset from FRE when there is no fixed FP offset. This patch changes the behavior of sframe_fre_get_fp_offset (): it turns an error into non-error. This change will be included with the next release of libsframe, where all the exposed symbols will be versioned with version node LIBSFRAME_1.0 for the first time. libsframe/ * sframe.c (sframe_fre_get_fp_offset): Return the fixed offset, if applicable. Else return the FP offset from the FRE. 2023-06-27 Indu Bhagat libsframe: update the semantics of sframe_fre_get_ra_offset Until now, sframe_fre_get_ra_offset () would return SFRAME_ERR_FREOFFSET_NOPRESENT if the ABI uses fixed RA offset (e.g., AMD64). A stack tracer, then, will call an explicit sframe_decoder_get_fixed_ra_offset () to get the RA offset. On second look, it appears to make sense to hide these details of whether the RA offset is fixed or not from the consumer. Now, with the changed semantics, the call to sframe_fre_get_ra_offset () will fetch the fixed RA offset if applicable, or get the RA offset from FRE when there is no fixed RA offset. Adjustments need to be made to ensure the textual dump remains the same as preivous. Currently, e.g., if RA is not being tracked per FRE, following is seen with objdump --sframe: STARTPC CFA FP RA 000000000000NNNN sp+X u u This patch changes the behavior of sframe_fre_get_ra_offset: it turns an error into non-error. This change will be included with the next release of libsframe, where all exposed symbols will be versioned for the first time. libsframe/ * sframe.c (sframe_fre_get_ra_offset): Return the fixed offset, if applicable. Else return the RA offset from the FRE. * sframe-dump.c (dump_sframe_func_with_fres): Make adjustments to keep the textual dump same as previous. 2023-06-27 Indu Bhagat libsframe: add symbol versioning Define an empty base version LIBSFRAME_0.0 and add all symbols to version LIBSFRAME_1.0. The previous release of libsframe (libsframe.so.0) did not have versioned symbols. Adding a libsframe.ver file so that future releases of the library (and its consumers) can manage the changes better. For Solaris ld, use -M mapfile command line option. libsframe does not restrict the set of exported symbols, so at this time there is no need to fall back on the libtool's -export-symbols option for platforms where some other linker (with a different command line option for symbol versioning) may be used. libsframe/ * Makefile.am: Use symbol versioning for libsframe. * Makefile.in: Regenerated. * configure: Check for Solaris ld. * configure.ac: Regenerated. * libsframe.ver: New file. 2023-06-27 Indu Bhagat libsframe: remove sframe_get_funcdesc_with_addr API This is an incompatible ABI change in libsframe. The interface provided by this function is not a healthy abstraction to expose: the return type sframe_func_desc_entry, which is defined in include/sframe.h (the SFrame binary format definition). This ties up the library in a undesirable way. Most importantly, this function should technically not be directly necessary for a stack tracer. A stack tracer will likely only need to do a sframe_find_fre (). Rename the API to continue to use the functionality internally in the library. bfd/linker does not use this function. Change the return type of the previous definition and make a note about its planned deprecation. include/ * sframe-api.h: Change return type of sframe_get_funcdesc_with_addr. Add comment for intention to deprecate. libsframe/ *sframe.c (sframe_get_funcdesc_with_addr): Change return type and set error code. This API is deprecated. (sframe_get_funcdesc_with_addr_internal): New definition for internal use. (sframe_find_fre): Use sframe_get_funcdesc_with_addr_internal instead. 2023-06-27 Indu Bhagat libsframe: add library versioning lisbframe was first released with Bintuils 2.40. As the library evolves, some changes will break the ABI. Add library versioning for users to manage these changes. For the next release of the library (libsframe.so.1), incompatible ABI changes are planned. These will include: - Deprecation of some APIs, like sframe_get_funcdesc_with_addr (), and - Change in the contract of some APIs (e.g., return type, behavior). In libtool-version, set the current to 1 to prepare for the upcoming release. Reset revision and age to 0. Add libtool-version file to EXTRA_DIST. libsframe/ * Makefile.am: Use libtool versioning. * Makefile.in: Regenerated. * libtool-version: New file. 2023-06-27 Philipp Tomsich RISC-V: Support Zicond extension This implements the Zicond (conditional integer operations) extension, as of version 1.0-rc2. The Zicond extension acts as a building block for branchless sequences including conditional-arithmetic, conditional-logic and conditional-select/move. The following instructions constitute Zicond: - czero.eqz rd, rs1, rs2 => rd = (rs2 == 0) ? 0 : rs1 - czero.nez rd, rs1, rs2 => rd = (rs2 != 0) ? 0 : rs1 See https://github.com/riscv/riscv-zicond/releases/download/v1.0-rc2/riscv-zicond-v1.0-rc2.pdf for the proposed specification and usage details. bfd/ChangeLog: * elfxx-riscv.c (riscv_multi_subset_supports): Recognize INSN_CLASS_ZICOND. (riscv_multi_subset_supports_ext): Recognize INSN_CLASS_ZICOND. gas/ChangeLog: * testsuite/gas/riscv/zicond.d: New test. * testsuite/gas/riscv/zicond.s: New test. include/ChangeLog: * opcode/riscv-opc.h (MATCH_CZERO_EQZ): Define. (MASK_CZERO_EQZ): Define. (MATCH_CZERO_NEZ): Define, (MASK_CZERO_NEZ): Define. (DECLARE_INSN): Add czero.eqz and czero.nez. * opcode/riscv.h (enum riscv_insn_class): Add INSN_CLASS_ZICOND. opcodes/ChangeLog: * riscv-opc.c: Add czero.eqz and czero.nez. Signed-off-by: Philipp Tomsich 2023-06-27 Nick Clifton Add note about adding ChangeLog.git to src-release.sh 2023-06-27 Cui, Lili gprofng: Update intel url Since the old software.intel.com has been removed, update a new one. gprofng/ChangeLog 2023-06-27 Lili Cui * gp-display-html/gp-display-html.in: Update intel url. 2023-06-27 GDB Administrator Automatic date update in version.in 2023-06-26 Nick Clifton Fix gas tests for aarch64-pe Synchromize libiberty sources with master version in gcc repository Sync config.guess and config.sub with upstream master versions. Updated French translation for the gprof sub-directory 2023-06-26 GDB Administrator Automatic date update in version.in 2023-06-25 Feiyang Chen LoongArch: Support referring to FCSRs as $fcsrX Previously, FCSRs were referred to as $rX, which seemed strange. We refer to FCSRs as $fcsrX, which ensures compatibility with LLVM IAS as well. gas/ChangeLog: * config/tc-loongarch.c: (loongarch_fc_normal_name): New definition. (loongarch_fc_numeric_name): New definition. (loongarch_single_float_opcodes): Modify `movgr2fcsr` and `movfcsr2gr`. testsuite/gas/loongarch/float_op.d: Likewise. testsuite/gas/loongarch/float_op.s: Likewise. include/ChangeLog: * opcode/loongarch.h: (loongarch_fc_normal_name): New extern. (loongarch_fc_numeric_name): New extern. opcodes/ChangeLog: * opcodes/loongarch-dis.c (loongarch_after_parse_args): Support referring to FCSRs as $fcsrX. * opcodes/loongarch-opc.c (loongarch_args_parser_can_match_arg_helper): Likewise. 2023-06-25 GDB Administrator Automatic date update in version.in 2023-06-24 GDB Administrator Automatic date update in version.in 2023-06-23 Thiago Jung Bauermann gdb/testsuite: Avoid infinite loop in gdb.reverse/step-reverse.exp This testcase sometimes gets stuck in a loop for hours when running in our CI. The problem is that due to an issue unrelated to reverse debugging the inferior exits early, and because of the overly generic ".*" pattern the testcase keeps sending the "next" command without noticing that the inferior is gone. gdb_test_multiple has a pattern to detect that "The program is not being run.", but since it is placed after the patterns from the caller it won't be triggered. It also has a timeout pattern but because it is triggered between successful matches, each time the test matches the '-re -wrap ".*"' this counts as a successful match and the timeout is reset. Since the test binary is compiled with debug information, fix by changing one of the generic patterns to match entering the main function and the other one to match the source code line number that is shown by GDB right after the "step" command. Also, as a precaution add a maximum number of times the "next" command will be sent. Co-Authored-By: Tom de Vries Reviewed-By: Bruno Larsen Approved-By: Tom de Vries 2023-06-23 Alan Modra [GOLD] PowerPC64 huge branch dynamic relocs PowerPC64 gold and ld.bfd implement an indirect branch trampoline, used when the destination of a branch exceeds a bounce through another "b" instruction. When generating PIEs or shared libraries, the addresses need dynamic relocations. This was implemented in gold using a dedicated relocation section, but this means the relative relocations for these addresses are not sorted properly with other dynamic relative relocations: gold doesn't support merging relocation sections, then sorting. Instead we need to use a single .rela.dyn section. This is done by increasing the size of rela_dyn_ during do_relax to account for needed dynamic relocations, delaying adding the actual relocations until the end of relaxation once the layout has stabilised. * powerpc.cc (Target_powerpc): Add rela_dyn_size_; (update_current_size): New function. (Target_powerpc::do_relax): Capture the size of rela_dyn_ at the start of relaxation. Artifically increase its size during relaxation to account for needed indirect branches, and add those relocations at the end. (Output_data_brlt_powerpc::rel_, reset_brlt_sizes), (finalize_brlt_sizes, add_reloc, set_current_size): Delete. (Target_powerpc::make_brlt_section): Don't make reloc section. 2023-06-23 Alan Modra [GOLD] Support setting DT_RELACOUNT late PowerPC gold adds relative dynamic relocs in do_relax. These aren't accounted for in the value set in add_target_dynamic_tags, which is called before do_relax. Provide a way of setting DT_RELCOUNT and DT_RELACOUNT at the point where .dynamic is written. * layout.cc (Layout::add_target_dynamic_tags): Add custom_relcount parameter. Emit DT_RELCOUNT/RELACOUNT as a custom target handled dynamic tag if set. * layout.h(Layout::add_target_dynamic_tags): Update prototype. * aarch64.cc (Target_aarch64::do_finalize_sections): Adjust add_target_dynamic_tags call. * arm.cc (Target_arm::do_finalize_sections): Likewise. * i386.cc (Target_i386::do_finalize_sections): Likewise. * mips.cc (Target_mips::do_finalize_sections): Likewise. * s390.cc (Target_s390::do_finalize_sections): Likewise. * sparc.cc (Target_sparc::do_finalize_sections): Likewise. * tilegx.cc (Target_tilegx::do_finalize_sections): Likewise. * x86_64.cc (Target_x86_64::do_finalize_sections): Likewise. * powerpc.cc (Target_powerpc::do_finalize_sections): Likewise. (Target_powerpc::do_dynamic_tag_custom_value): New function. 2023-06-23 Alan Modra [GOLD] powerpc DT_RELACOUNT DT_RELACOUNT was calculated incorrectly, and relative relocs not sorted as they should be to the start of .rela.dyn, due to adding one particular class of dynamic reloc using the wrong "add" method. * powerpc.cc (Target_powerpc::Scan::global): Add relative dyn relocs for ADDR64 and similar using add_global_relative. 2023-06-23 Alan Modra lto test fails with -fno-inline in CFLAGS Putting -fno-inline in CFLAGS results in these failures. FAIL: Build liblto-17b.so 1 FAIL: PR ld/12365 FAIL: PR ld/13183 * ld-plugin/lto.exp: Add -finline to compiler flags in some tests. 2023-06-23 Tom Tromey Fix off-by-one error Simon pointed out that commit a2bbca9fa5e ("Use std::vector for agent_expr::reg_mask") caused a regression in libstdc++ debug mode. This was due to an off-by-one error in a vector resize. This patch fixes the problem. 2023-06-23 GDB Administrator Automatic date update in version.in 2023-06-22 Ilya Leoshkevich gdb/testsuite: fix gdb.python/py-unwind.exp with python >= 3.11 Python 3.11 changed the AttributeError message - see commit 0cb765b2cec9 ("bpo-46730: Add more info to @property AttributeError messages (GH-31311)"). Add the new message to the expectations. Approved-By: Tom Tromey Link: https://sourceware.org/pipermail/gdb-patches/2023-June/200433.html 2023-06-22 H.J. Lu Revert "x86: Don't check if AVX512 template requires AVX512VL" This reverts commit c7face14225296a2f5d3ebeb8ace88c166d80c3e. 2023-06-22 Tom de Vries [gdb/testsuite] Clean or check standard_output_file dir in gdb_init In commit e2adba909e7 ("[gdb/testsuite] Clean up before compilation in gdb.ada/call-no-debug.exp") I added some code in the test-case to remove some files at the start of the test-case: ... remote_file host delete [standard_output_file prog.o] remote_file host delete [standard_output_file prog.ali] ... Then in commit b7b77500dc5 ("[gdb/testsuite] Clean standard_output_file dir in gdb_init") I tried to do this more structurally, by cleaning up the entire standard_output_file directory, for all test-cases. This caused a regression when using "make check -j 2", due to the cleanup removing the active gdb.log, so I reverted the commit. Try again, this time handling the two cases separately. If the standard_output_file directory contains an active gdb.log, check that the directory contains no files other than gdb.log and gdb.sum. This puts the reponsibility for the cleanup at the callers in gdb/testsuite/Makefile.in which use --outdir. If the standard_output_file directory doesn't contain an active gdb.log, clean it by removing the entire directory. An exception is made for performance tests, where cleaning up the standard_output_file dir is the wrong thing to do, because an invocation with GDB_PERFTEST_MODE == run is intended to reuse binaries left there by an earlier invocation with GDB_PERFTEST_MODE == compile. Tested on x86_64-linux. Suggested-By: Tom Tromey Reviewed-By: Tom Tromey Tested-By: Luis Machado 2023-06-22 Tom Tromey Implement DAP "hover" context A DAP client can request that an expression be evaluated in "hover" context, meaning that it should not cause side effects. In gdb, this can be implemented by temporarily setting a few "may-" parameters to "off". In order to make this work, I had to also change "may-write-registers" so that it can be changed while the program is running. I don't think there was any reason for this prohibition in the first place. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30476 2023-06-22 Tom Tromey Implement DAP logging breakpoints DAP allows a source breakpoint to specify a log message. When this is done, the breakpoint acts more like gdb's dprintf: it logs a message but does not cause a stop. I looked into implement this using dprintf with the new %V printf format. However, my initial attempt at this did not work, because when the inferior is continued, the dprintf output is captured by the gdb.execute call. Maybe this could be fixed by having all inferior-continuation commands use the "&" form; the main benefit of this would be that expressions are only parsed a single time. 2023-06-22 Tom Tromey Handle supportsVariablePaging in DAP A bug report about the supportsVariablePaging capability in DAP resulted in a clarification: when this capability is not present, DAP implementations should ignore the paging parameters to the "variables" request. This patch implements this clarification. Implement type checking for DAP breakpoint requests I realized that with a small refactoring, it is possible to type-check the parameters to the various DAP breakpoint requests. This would have caught the earlier bug involving hitCondition. Handle exceptions when creating DAP breakpoints When creating a DAP breakpoint, a failure should be returned by setting "verified" to False. gdb didn't properly implement this, and there was a FIXME comment to this effect. This patch fixes the problem. Reuse breakpoints more frequently in DAP The DAP breakpoint code tries to reuse a breakpoint when possible. Currently it uses the condition and the hit condition (aka ignore count) when making this determination. However, these attributes are just going to be reset anyway, so this patch changes the code to exclude these from the reuse decision. Fix type of DAP hitCondition DAP specifies a breakpoint's hitCondition as a string, meaning it is an expression to be evaluated. However, gdb implemented this as if it were an integer instead. This patch fixes this oversight. 2023-06-22 Simon Farre gdb/DAP Few bug fixes & Evaluate Array Watch vars v2. EvaluateResult does not need a name, just as what Tom pointed out in previous review. It's only the *children* that need to be made sure that their names are valid. An identifier for a variable, can't ever have an integer as a name, anyhow (not as far as I am aware, no programming languages allow for that). Removed the f-strings and use str() instead as pointed out that f-strings might not be supported fully. v1. This patch fixes a few bugs. First of all, name of VariableReferences must always be of string type. This patch makes sure that this is the case by formatting the name. If (when) the name is an integer, this will cause clients to fail or throw errors. Fixes a bug in NoOpArrayPrinter that calculated children to be N, but only ever retrieves N-1 children, which makes Python at some time later (during fetch_children -> fetch_one_child(N) ) raise an exception (out of list index) which makes the entire request go bad. The result[self.result_name] also f-strings the printer.to_string() value, because this can potentially be a LazyString (which is a Python object, not a string) and is not serializable by json.dumps. Approved-By: Tom Tromey 2023-06-22 GDB Administrator Automatic date update in version.in 2023-06-21 H.J. Lu x86: Free the symbol buffer and the relocation buffer after use When --no-keep-memory is used, the symbol buffer and the relocation buffer aren't cached. When packing relative relocations, we may allocate a new symbol buffer and a new relocation buffer for each eligible section in an object file. If there are many sections, memory may be exhausted. In this case, we should free the symbol buffer and the relocation buffer after use. If symbol buffer entries are used to track relative relocations against local symbols for later use, the symbol buffer should be cached. PR ld/30566 * elfxx-x86.c (elf_x86_relative_reloc_record_add): Add an argument to inform caller if the symbol buffer should be kept. (_bfd_x86_elf_link_relax_section): Call _bfd_elf_link_info_read_relocs instead of _bfd_elf_link_read_relocs. Free the symbol buffer and the relocation buffer after use. Cache the symbol buffer if it is used. 2023-06-21 Tom Tromey Add missing backslash to update-gnulib.sh A user on irc noticed a missing backslash on one line in update-gnulib.sh. This patch adds it. Re-running update-gnulib.sh causes a few copyright notices to change. Presumably these are from upstream gnulib and shouldn't be touched by our yearly update. I've updated the script to account for this, but I did not want to try testing it... 2023-06-21 Tom de Vries [gdb/testsuite] Add have_host_locale With test-case gdb.tui/pr30056.exp, I run into: ... sh: warning: setlocale: LC_ALL: cannot change locale (C.UTF-8)^M ... and then subsequently into: ... WARNING: timeout in accept_gdb_output FAIL: gdb.tui/pr30056.exp: Control-C ... This is on a CentOS 7 distro for powerpc64le. Either it has no C.UTF-8 support, or it's not installed: ... $ locale -a | grep ^C C $ ... Fix this by: - adding a new proc have_host_locale, and - using it in all test-cases using setenv LC_ALL. Tested on powerpc64le-linux and x86_64-linux. 2023-06-21 Tom de Vries [gdb/testsuite] Fix gdb.tui/wrap-line.exp PR testsuite/30458 reports the following FAIL: ... PASS: gdb.tui/wrap-line.exp: width-auto-detected: cli: wrap ^CQuit (gdb) WARNING: timeout in accept_gdb_output Screen Dump (size 50 columns x 24 rows, cursor at column 6, row 3): 0 Quit 1 (gdb) 7890123456789012345678901234567890123456789 2 W^CQuit 3 (gdb) ... FAIL: gdb.tui/wrap-line.exp: width-auto-detected: cli: prompt after wrap ... The problem is that the regexp doesn't account for the ^C: ... gdb_assert { [Term::wait_for "^WQuit"] } "prompt after wrap" ... The ^C occurs occasionally. This is something we'd like to fix. It's reported as a readline problem here ( https://lists.gnu.org/archive/html/bug-readline/2023-06/msg00000.html ). For now, fix this by updating the regexp, and likewise in another place in the test-case where we use ^C. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30458 2023-06-21 Alan Modra PR30536, ppc64el gold linker produces unusable clang-16 binary In commit 0961e631575b, the fix for PR30217, make_lplt_section and make_brlt_section were changed to use rela_dyn_ rather than their own separate dynamic reloc sections. This fails miserably whenever brlt_ is needed for long branches, due to needing to iterate sizing and thus reset brlt_ sizes. PR 30536 PR 30217 * powerpc.cc (Target_powerpc::make_brlt_section): Don't use rela_dyn_. 2023-06-21 Tom de Vries [gdb/testsuite] Reimplement Term::command_no_prompt_prefix Say we run test-case gdb.tui/basic.exp. It calls Term::enter_tui, which does: ... command_no_prompt_prefix "tui enable" ... The proc command_no_prompt_prefix is documented as: ... # As proc command, but don't wait for an initial prompt. This is used for # initial terminal commands, where there's no prompt yet. ... Indeed, before the "tui enable" command, the tuiterm is empty, so there is no prompt and just before switching to TUI we have in the tuiterm: ... tui enable ... The reason that there is no prompt, is that: - in order for tuiterm to show something, its input processing procs need to be called, and - the initial gdb prompt, and subsequent prompts generated by gdb_test-style procs, are all consumed by those procs instead. This is in principle not a problem, but the absence of a prompt makes a tuiterm session look less like a session on an actual xterm. Add a new proc gen_prompt, that: - generates a prompt using echo - consumes the response before the prompt using gdb_expect - consumes the prompt using Term::wait_for "". This allows us to reimplement Term::command_no_prompt_prefix using Term::command, and just before switching to TUI we have in the tuiterm: ... (gdb) tui enable ... Tested on x86_64-linux. 2023-06-21 Tom de Vries [gdb/testsuite] Make Term::wait_for "" match only a prompt The semantics of Term::wait_for is: ... # Accept some output from gdb and update the screen. WAIT_FOR is # a regexp matching the line to wait for. Return 0 on timeout, 1 # on success. proc wait_for {wait_for} { ... Note that besides the regexp, also a subsequent gdb prompt is matched. I recently used wait_for "" in a few test-cases, thinking that this would match just a prompt, but in fact that's not the case. Fix this in wait_for, and add a corresponding test in gdb.tui/tuiterm-2.exp. Tested on x86_64-linux. 2023-06-21 Nick Clifton Prune linker warnings about an executable stack being created with the -z execstack option. * testsuite/lib/binutils-common.exp (prune_warnings_extra): Prune warnings about -z execstack creating an executable stack. For test for PR 29072 when the linker is configured with --enable-default-execstack=no. PR 29072 * testsuite/ld-elf/elf.exp (target_defaults_to_execstack): Always return false for linkers configured with the --enable-default-execstack=no option. 2023-06-21 Tankut Baris Aktemur gdbserver: use target_waitstatus::to_string in 'prepare_resume_reply' Use the to_string method of target_waitstatus in 'prepare_resume_reply' for a more readable log message. Approved-By: Tom Tromey 2023-06-21 Jan Beulich x86: fix expansion of %XV Only %LV should continue on to S handling; avoid emitting a stray 'l' (typically) in suffix-always mode. 2023-06-21 Alan Modra elf32_arm_get_synthetic_symtab memory leak ARM get_synthetic_symtab reads .plt and caches that data. Caching the data doesn't make a lot of sense since get_synthetic_symtab is only called once per bfd, and the memory might be put to better use. It also leaks on closing the bfd. * elf32-arm.c (elf32_arm_get_synthetic_symtab): Don't cache plt contents. Free plt data before returning. 2023-06-21 Alan Modra macho-o.c don't leak strtab * mach-o.c (bfd_mach_o_write_symtab_content): Free strtab on success path. 2023-06-21 GDB Administrator Automatic date update in version.in 2023-06-20 Tom Tromey Use ARRAY_SIZE in ax-general.c This changes a couple of spots in ax-general.c to use ARRAY_SIZE. While making this change, I noticed that one of the bounds checks was incorrect. Reviewed-by: John Baldwin 2023-06-20 Tom Tromey Remove aop_last aop_last is only used for an assertion. However, due to the '.def' construct in the sources, this assert could never plausibly trigger (the assert predates the use of a .def file here). This patch removes the constant and the assert. Reviewed-by: John Baldwin 2023-06-20 Tom Tromey Make aop_map 'static' This changes aop_map to be 'static'. Reviewed-by: John Baldwin 2023-06-20 Tom Tromey Use bool for agent_expr::tracing This changese agent_expr::tracing to have type bool, allowing inline initialization and cleaning up the code a little. Reviewed-by: John Baldwin 2023-06-20 Tom Tromey Simplify agent_expr constructor This simplifies the agent_expr constructor a bit, and removes the destructor entirely. Reviewed-by: John Baldwin 2023-06-20 Tom Tromey Use std::vector for agent_expr::reg_mask agent_expr::reg_mask implements its own packed boolean vector. This patch replaces it with a std::vector, simplifying the code. Reviewed-by: John Baldwin 2023-06-20 Tom Tromey Use gdb::byte_vector in agent_expr This changes agent_expr to use gdb::byte_vector rather than manually reimplementing a vector. Reviewed-by: John Baldwin 2023-06-20 Tom Tromey Remove mem2hex tracepoint.c has a 'mem2hex' function that is functionally equivalent to bin2hex. This patch removes the redundancy. Reviewed-by: John Baldwin 2023-06-20 H.J. Lu x86: Don't check if AVX512 template requires AVX512VL If the ZMM operand in an AVX12 template also allows XMM or ZMM, this template must require AVX512VL. Drop the AVX512VL requirement check on such AVX512 templates. * config/tc-i386.c (check_VecOperands): Don't check if AVX512 template requires AVX512VL. 2023-06-20 Tom Tromey Use std::string in do_set_command do_set_command manually updates a string, only to copy it to a std::string and free the working copy. This patch changes this code to use std::string for everything, simplifying the code and removing a copy. Reviewed-by: John Baldwin 2023-06-20 Tom Tromey Use byte_vector in remote.c:readahead_cache This patch changes the remote.c readahead_cache to use gdb::byte_vector. This simplifies the code by removing manual memory management. Reviewed-by: John Baldwin 2023-06-20 Tom Tromey Use std::string in linux-osdata.c I found some code in linux-osdata that manually managed a string. Replacing this with std::string simplifies it. Reviewed-by: John Baldwin 2023-06-20 Tom Tromey Use unique_xmalloc_ptr for mi_parse::command This changes mi_parse::command to be a unique_xmalloc_ptr and fixes up all the uses. This avoids some manual memory management. std::string is not used here due to how the Python API works -- this approach avoids an extra copy there. Reviewed-by: Keith Seitz 2023-06-20 Tom Tromey Use std::string for MI token This changes the MI "token" to be a std::string, removing some manual memory management. It also makes current_token 'const' in order to support this change. Reviewed-by: Keith Seitz 2023-06-20 Alan Modra Don't segfault in mips reloc special_functions A symbol defined in a section from a shared library will have a NULL section->output_section during linking. * elf32-mips.c (gprel32_with_gp): Don't segfault on NULL symbol->section->output_section. * elf64-mips.c (mips_elf64_gprel32_reloc): Likewise. * elfn32-mips.c (mips_elf_gprel16_reloc): Likewise. (mips_elf_literal_reloc, mips_elf_gprel32_reloc): Likewise. (gprel32_with_gp, mips16_gprel_reloc): Likewise. * elfxx-mips.c (_bfd_mips_elf_gprel16_with_gp): Likewise. (_bfd_mips_elf_generic_reloc): Likewise. 2023-06-20 GDB Administrator Automatic date update in version.in 2023-06-19 Tom de Vries Revert "[gdb/testsuite] Clean standard_output_file dir in gdb_init" This reverts commit b7b77500dc56e5bc21473dd4f3dde2543d894557. 2023-06-19 Simon Farre Fixes 28ab59607ef40b9571c0702ffba8f6aa6fb1b033 Python formatting errors fixed, introduced by this commit. Fixes f1a614dc8f015743e9fe7fe5f3f019303f8db718 Fixes failure reported by buildbot regarding ill-formatted Python code. 2023-06-19 Simon Farre gdb/Python: Added ThreadExitedEvent v6: Fix comments. Fix copyright Remove unnecessary test suite stuff. save_var had to stay, as it mutates some test suite state that otherwise fails. v5: Did what Tom Tromey requested in v4; which can be found here: https://pi.simark.ca/gdb-patches/87pmjm0xar.fsf@tromey.com/ v4: Doc formatting fixed. v3: Eli: Updated docs & NEWS to reflect new changes. Added a reference from the .ptid attribute of the ThreadExitedEvent to the ptid attribute of InferiorThread. To do this, I've added an anchor to that attribute. Tom: Tom requested that I should probably just emit the thread object; I ran into two issues for this, which I could not resolve in this patch; 1 - The Thread Object (the python type) checks it's own validity by doing a comparison of it's `thread_info* thread` to nullptr. This means that any access of it's attributes may (probably, since we are in "async" land) throw Python exceptions because the thread has been removed from the thread object. Therefore I've decided in v3 of this patch to just emit most of the same fields that gdb.InferiorThread has, namely global_num, name, num and ptid (the 3-attribute tuple provided by gdb.InferiorThread.ptid). 2 - A python user can hold a global reference to an exiting thread. Thus in order to have a ThreadExit event that can provide attribute access reliably (both as a global reference, but also inside the thread exit handler, as we can never guarantee that it's executed _before_ the thread_info pointer is removed from the gdbpy thread object), the `thread_info *` thread pointer must not be null. However, this comes at the cost of gdb.InferiorThread believing it is "valid" - which means, that if a user holds takes a global reference to that exiting event thread object, they can some time later do `t.switch()` at which point GDB will 'explode' so to speak. v2: Fixed white space issues and NULL/nullptr stuff, as requested by Tom Tromey. v1: Currently no event is emitted for a thread exit. This adds this functionality by emitting a new gdb.ThreadExitedEvent. It currently provides four attributes: - global_num: The GDB assigned global thread number - num: the per-inferior thread number - name: name of the thread or none if not set - ptid: the PTID of the thread, a 3-attribute tuple, identical to InferiorThread.ptid attribute Added info to docs & the NEWS file as well. Added test to test suite. Fixed formatting. Feedback wanted and appreciated. 2023-06-19 Simon Farre gdb/dap - Getting thread names Renamed thread_name according to convention (_ first) When testing firefox tests, it is apparent that _get_threads returns threads with name field = None. I had initially thought that this was due to Firefox setting the names using /proc/pid/task/tid/comm, by writing directly to the proc fs the names, but apparently GDB seems to catch this, because I re-wrote the basic-dap.exp/c to do this specifically and it saw the changes. So I couldn't determine right now, what operation of name change that GDB does not pick up, but with this patch, GDB will pick up the thread names for an applications that set the name of a thread in ways that aren't obvious. 2023-06-19 Nick Clifton Fix illegal memory access implementing relocs in a fuzzed x86_64 object file. PR 30560 * elf64-x86-64.c (elf_x86_64_relocate_section): Add more checks for a valid relocation offset. 2023-06-19 Tom de Vries [gdb/testsuite] Add shared_gnat_runtime_has_debug_info Test-case gdb.ada/catch_ex_std.exp passes for me with package libada7-debuginfo installed, but after removing it I get: ... (gdb) catch exception some_kind_of_error^M Your Ada runtime appears to be missing some debugging information.^M Cannot insert Ada exception catchpoint in this configuration.^M (gdb) FAIL: gdb.ada/catch_ex_std.exp: catch exception some_kind_of_error ... The test-case contains a require gnat_runtime_has_debug_info to deal with this, but the problem is that this checks the static gnat runtime, while this test-case uses the shared one. Fix this by introducing shared_gnat_runtime_has_debug_info, and requiring that one instead. Tested on x86_64-linux. PR testsuite/30094 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30094 2023-06-19 Tom de Vries [gdb/tui] Simplify tui_update_variables Simplify tui_update_variables by using template function assign_return_if_changed. Tested on x86_64-linux. 2023-06-19 Tom de Vries [gdb] Add template functions assign_return/set_if_changed Add template functions assign_return_if_changed and assign_set_if_changed in gdb/utils.h: ... template void assign_set_if_changed (T &lval, const T &val, bool &changed) { ... } template bool assign_return_if_changed (T &lval, const T &val) { ... } ... This allows us to rewrite code like this: ... if (tui_border_attrs != entry->value) { tui_border_attrs = entry->value; need_redraw = true; } ... into this: ... need_redraw |= assign_return_if_changed (tui_border_attrs, entry->value); ... or: ... assign_set_if_changed (tui_border_attrs, entry->value, need_redraw); ... The names are a composition of the functionality. The functions: - assign VAL to LVAL, and either - return true if the assignment changed LVAL, or - set CHANGED to true if the assignment changed LVAL. Tested on x86_64-linux. 2023-06-19 Andreas Schwab riscv: Use run-time endianess for floating point literals gas/ PR binutils/30551 * config/tc-riscv.c (md_atof): Use target_big_endian instead of TARGET_BYTES_BIG_ENDIAN. * testsuite/gas/riscv/float-be.d: New file. * testsuite/gas/riscv/float-le.d: New file. * testsuite/gas/riscv/float.s: New file. 2023-06-19 GDB Administrator Automatic date update in version.in 2023-06-18 Tom de Vries [gdb/testsuite] Clean standard_output_file dir in gdb_init In commit e2adba909e7 ("[gdb/testsuite] Clean up before compilation in gdb.ada/call-no-debug.exp") I added some code in the test-case to remove some files at the start of the test-case: ... remote_file host delete [standard_output_file prog.o] remote_file host delete [standard_output_file prog.ali] ... Replace this with cleaning up the entire directory instead, for all test-cases. Tested on x86_64-linux. Suggested-By: Tom Tromey Reviewed-By: Tom Tromey 2023-06-18 GDB Administrator Automatic date update in version.in 2023-06-17 Tom de Vries [gdb/testsuite] Remove f-string in gdb.python/py-unwind.py on openSUSE Leap 42.3, with python 3.4, I run into a "SyntaxError: invalid syntax" due to usage of an f-string in test-case gdb.python/py-unwind.py. Fix this by using string concatenation using '+' instead. Tested on x86_64-linux. 2023-06-17 Tom de Vries [gdb/testsuite] Add nopie in a few test-cases When running test-case gdb.arch/i386-disp-step.exp with target board unix/-m32/-fPIE/-pie we run into: ... gdb compile failed, ld: i386-disp-step0.o: warning: relocation in read-only section `.text' ld: warning: creating DT_TEXTREL in a PIE ... Fix this by adding nopie in the compilation flags. Likewise in a few other test-cases. Tested on x86_64-linux. 2023-06-17 Tom de Vries [gdb/testsuite] Use require in gdb.dwarf2/implptr.exp In test-case gdb.dwarf2/implptr.exp I noticed: ... } elseif {![is_x86_like_target]} { # This test can only be run on x86 targets. unsupported "needs x86-like target" return 0 } ... Use instead "require is_x86_like_target". Tested on x86_64-linux. 2023-06-17 GDB Administrator Automatic date update in version.in 2023-06-16 Tom de Vries [gdb/testsuite] Clean up before compilation in gdb.ada/call-no-debug.exp Running test-case gdb.ada/call-no-debug.exp with target board unix/-m64 works fine, but if we run it again with target board unix-m32, we run into: ... gnatlink prog.ali -m32 -g -o prog^M ld: i386:x86-64 architecture of input file `b~prog.o' is incompatible with \ i386 output^M ... This is due to compiling with no-force. The test-case: - first compiles pck.adb into pck.o (without debug info), and - then compiles prog.adb and pck.o into prog (with debug info). Using no-force in the second compilation make sure that pck.adb is not compiled again, with debug info. But it also means it will pick up intermediate files related to prog.adb from a previous compilation. Fix this by removing prog.o and prog.ali before compilation. Tested on x86_64-linux. 2023-06-16 Tom de Vries [gdb/testsuite] Use %progbits in gdb.arch/thumb*.S In commit 0f2cd53cf4f ("[gdb/testsuite] Handle missing .note.GNU-stack") I updated a gdb.arch/arm*.S test-case to use %progbits rather than @progbits, but failed to do so for gdb.arch/thumb*.S. Fix this oversight. Tested on arm-linux-gnueabihf. 2023-06-16 mengqinggang LoongArch: Fix ld "undefined reference" error with --enable-shared Because _bfd_read_unsigned_leb128 is hidden visibility, so it can't be referenced out of shared object. The new function loongarch_get_uleb128_length just used to call _bfd_read_unsigned_leb128. bfd/ChangeLog: * elfxx-loongarch.c (loongarch_get_uleb128_length): New function. * elfxx-loongarch.h (loongarch_get_uleb128_length): New function. gas/ChangeLog: * config/tc-loongarch.c (md_apply_fix): Use loongarch_get_uleb128_length. 2023-06-16 Andrew Burgess gdb: update IRC reference from Freenode to Libera.Chat It's been some time since the switch from Freenode to Libera.Chat, however, there's still a reference to Freenode in the 'gdb --help' output. Lets update that. 2023-06-16 Jan Beulich x86: shrink Masking insn attribute to a single bit (boolean) The logic can actually be expressed with less code that way, utilizing that there are common patterns of when which form of masking is permitted. This then also eliminates the large set of open-codings of BOTH_MASKING in the opcode table. 2023-06-16 Alan Modra Correct ld-elf/eh5 test for hppa64 Commit 3c0afdb78988 regressed this test for hppa64, because the test had been enabled for hppa64 in the time between the mips changes and their reversion. This patch isn't just a simple reapply, I recreated the testsuite change by hand for hppa64: Two lines in eh5.d might need further changes for mips. 2023-06-16 GDB Administrator Automatic date update in version.in 2023-06-15 Maciej W. Rozycki binutils/NEWS: Mention Sony Allegrex MIPS CPU support Mention the addition of Sony Allegrex processor support to the MIPS port. binutils/ * NEWS: Mention Sony Allegrex MIPS CPU support. 2023-06-15 Maciej W. Rozycki MIPS/GAS/testsuite: Fix `-modd-spreg'/`-mno-odd-spreg' test invocations Reformat `-modd-spreg'/`-mno-odd-spreg' test invocations in mips.exp to fit in 79 columns gas/ * testsuite/gas/mips/mips.exp: Reformat `-modd-spreg'/`-mno-odd-spreg' test invocations. 2023-06-15 David Guillen Fandos Add additional missing Allegrex CPU instructions Allegrex supports some MIPS32 and MIPS32r2 instructions (albeit with some encoding differences) such as bit manipulation (ins/ext) and MLA (madd/msub). It also features some new instructions like wsbw and min/max or device-specific ones such as mfic. Add rotation instructions to MIPS Allegrex CPU The Allegrex CPU supports bit rotation instructions as described in the MIPS32 release 2 CPU (even though it is a MIPS-2 based CPU). Add MIPS Allegrex CPU as a MIPS2-based CPU The Allegrex CPU was created by Sony Interactive Entertainment to power their portable console, the PlayStation Portable. The pspdev organization maintains all sorts of tools to create software for said device including documentation. 2023-06-15 Maciej W. Rozycki GAS/doc: Correct Tag_GNU_MIPS_ABI_MSA attribute description Rewrite the paragraph to match the style of Tag_GNU_MIPS_ABI_FP text immediately above, correcting grammar and formatting at the same time. gas/ * doc/as.texi (MIPS Attributes): Correct Tag_GNU_MIPS_ABI_MSA attribute description. 2023-06-15 Maciej W. Rozycki Revert "MIPS: gas: alter 64 or 32 for mipsisa triples if march is implicit" This reverts commit 094025a30bb2da19df3990e0c0ff8167af823aa1. It was applied unapproved. Revert "MIPS: default r6 if vendor is img" This reverts commit be0d391f22fe6009c3be907753975a984cbbcc23. It was applied unapproved. Revert "MIPS: fix r6 testsuites" This reverts commit ffc528aed56b9e2c171137da28690a9bb6861b0b. It was applied unapproved. Revert "MIPS: fix -gnuabi64 testsuite" This reverts commit cb81e84c72933a7fad10b75b7e270d92d8d65251. It was applied unapproved. Revert "MIPS: fix some ld testcases with compiler" This reverts commit a0631c1501c113c04891c9a24a9ff5276257f28d. It was applied unapproved. Revert "MIPS: add MT ASE support for micromips32" This reverts commit acce83dacff0ce43677410c67aaae32817afe991. It was applied unapproved. Revert "MIPS: sync oprand char usage between mips and micromips" This reverts commit 5b207b919483f67311a73dfc1de8897ecfd8e776. It was applied unapproved. 2023-06-15 Alan Modra Re: Add some expected failures for bfin linker tests After commit 7ade0f1582c4 I was seeing bfin-elf +XPASS: weak symbols, and on looking into the bfin targets a little, discovered we have two bfin-linux targets. One, bfin-uclinux, is like bfin-elf in that ld -m elf32bfin is the default, and the other, bfin-linux-uclibc where ld -m elf32bfinfd is the default. So putting bfin-*-*linux* in test xfails or elsewhere is wrong. We want bfin-*-linux* instead to just select the fdpic bfin target. This patch corrects wrong bfin target triples in the ld testsuite, not just the recent change but others I'd added to xfails too. It also fixes the bfin-linux-uclibc ld-elf/64ksec fail 2023-06-15 Alan Modra vms write_archive memory leaks This fixes two memory leaks in the vms archive handling. * vms-lib.c (_bfd_vms_lib_build_map): Free input symbols. (_bfd_vms_lib_write_archive_contents): Free archive map symbols. 2023-06-15 GDB Administrator Automatic date update in version.in 2023-06-14 Tom de Vries [gdb/testsuite] Fix gdb.base/step-over-exit.exp with glibc debuginfo In test-case gdb.base/step-over-exit.exp, we set a breakpoint on _exit and continue, expecting to hit the breakpoint. Without glibc debug info installed, we have with target board unix/-m64: ... Thread 2.1 "step-over-exit" hit Breakpoint 2.2, 0x00007ffff7d46aee in \ _exit () from /lib64/libc.so.6^M (gdb) PASS: gdb.base/step-over-exit.exp: continue to exit ... and with target board unix/-m32: ... Thread 2.1 "step-over-exit" hit Breakpoint 2.2, 0xf7d84c25 in _exit () from \ /lib/libc.so.6^M (gdb) PASS: gdb.base/step-over-exit.exp: continue to exit ... However after installing debug info (packages glibc-debuginfo and glibc-32bit-debuginfo), we have for -m64 (note: __GI__exit instead of _exit): ... Thread 2.1 "step-over-exit" hit Breakpoint 2.2, \ __GI__exit (status=) at \ ../sysdeps/unix/sysv/linux/_exit.c:27^M 27 {^M (gdb) PASS: gdb.base/step-over-exit.exp: continue to exit ... and -m32 (note: _Exit instead of _exit): ... Thread 2.1 "step-over-exit" hit Breakpoint 2.2, _Exit () at \ ../sysdeps/unix/sysv/linux/i386/_exit.S:24^M 24 ../sysdeps/unix/sysv/linux/i386/_exit.S: No such file or directory.^M (gdb) FAIL: gdb.base/step-over-exit.exp: continue to exit ... The gdb_test allows for both _exit and __GI__exit, but not _Exit: ... gdb_test "continue" \ "Continuing\\..*Breakpoint $decimal.*_exit \\(.*\\).*" \ "continue to exit" ... Fix this by allowing _Exit as well. Tested on x86_64-linux. 2023-06-14 Nick Clifton Add some expected failures for bfin linker tests Add --remap-inputs option to the BFD linker. PR 30374 * ldfile.c (struct input_remap): New structure. (ldfile_add_remap): New function. (ldfile_remap_input_free): New function. (ldfile_add_remap_file): New function. (ldfile_possibly_remap_input): New function. (ldfile_print_input_remaps): New function. * ldfile.h: Add prototypes for new functions. * ldlang.c (new_afile): Call ldfile_possibly_remap_input. (lang_finish): Call ldfile_remap_input_free. (lang_map): Call ldfile_print_input_remaps. * ldlex.h (OPTION_REMAP_INPUTS, OPTION_REMAP_INPUTS_FILE): Define. * lexsup.c (ld_options): Add --remap-inputs-file and --remap-inputs. (parse_args): Handle new options. * NEWS: Mention the new feature. * ld.texi: Document the new options. * testsuite/ld-misc/input-remap.exp: New test driver. * testsuite/ld-misc/remaps.r: New file: Expected linker output. * testsuite/ld-misc/remaps.txt: New file. Input remaps file. 2023-06-14 Alan Modra asprintf memory leaks A number of backends want to return bfd_reloc_dangerous messaqes from relocation special_function, and construct the message using asprintf. Such messages are not freed anywhere, leading to small memory leaks inside libbfd. To limit the leaks, I'd implemented a static buffer in the ppc backends that was freed before use in asprintf output. This patch extends that scheme to other backends using a shared static buffer and goes further in freeing the buffer on any bfd_close. The patch also fixes a few other cases where asprintf output was not freed after use. bfd/ * bfd.c (_input_error_msg): Make global and rename to.. (_bfd_error_buf): ..this. (bfd_asprintf): New function. (bfd_errmsg): Use bfd_asprintf. * opncls.c (bfd_close_all_done): Free _buf_error_buf. * elf32-arm.c (find_thumb_glue, find_arm_glue): Use bfd_asprintf. * elf32-nios2.c (nios2_elf32_relocate_section): Likewise. * elf32-ppc.c (ppc_elf_unhandled_reloc): Likewise. * elf64-ppc.c (ppc64_elf_unhandled_reloc): Likewise. * elfnn-riscv.c (riscv_resolve_pcrel_lo_relocs): Likewise. (riscv_elf_relocate_section): Likewise. * libbfd.h: Regenerate. gas/ * read.c (read_end): Free current_name and current_label. (do_s_func): Likewise on error path. strdup label. ld/ * pe-dll.c (make_head, make_tail, make_one), (make_singleton_name_thunk, make_import_fixup_entry), (make_runtime_pseudo_reloc), (pe_create_runtime_relocator_reference: Free oname after use. 2023-06-14 Alan Modra Re: bfd/elf.c strtab memory leak There are other places that leak the strtab. * elf.c (_bfd_elf_compute_section_file_positions): Free strtab on error paths. 2023-06-14 GDB Administrator Automatic date update in version.in 2023-06-13 Tom de Vries [gdb/testsuite] Fix gdb.tui/long-prompt.exp with read1 When running test-case gdb.tui/long-prompt.exp with check-read1, we get: ... (gdb) FAIL: gdb.tui/long-prompt.exp: prompt size == width + 1: \ end of screen: at last line ... The problem is in these commands: ... Term::command "echo \\n" Term::command "echo \\n" Term::command "echo \\n" Term::command "echo \\n" ... The last one makes the terminal scroll, and the scrolling makes the expected output match on a different line. Fix this by replacing the sequence with a single command: ... Term::command "echo \\n\\n\\n\\n\\n\\n" ... which avoids scrolling. Tested on x86_64-linux. 2023-06-13 Tom de Vries [gdb/testsuite] Fix and add prompt anchoring in tuiterm There is a test-case that contains a unit test for tuiterm: gdb.tui/tuiterm.exp. However, this only excercises the tuiterm itself, and not the functions that interact with it, like Term::command. Add a new test-case gdb.tui/tuiterm-2.exp that: - overrides proc accept_gdb_output (to be able simulate incorrect responses while avoiding the timeout), - overrides proc send_gdb (to be able to call Term::command without a gdb instance, such that all tuiterm input is generated by the test-case). - issues Term::command calls, and - checks whether they behave correctly. This exposes a problem in Term::command. The "prompt before command" regexp starts with a bit that is supposed to anchor the prompt to the border: ... set str "(^|\|)$gdb_prompt $str" ... but that doesn't work due to insufficient escaping. Fix this by adding the missing escape: ... set str "(^|\\|)$gdb_prompt $str" ... Futhermore, the "prompt after command" regexp in Term::wait_for has no anchoring at all: ... set prompt_wait_for "$gdb_prompt \$" ... so add that as well. Tested on x86_64-linux. 2023-06-13 Tom de Vries [gdb/testsuite] Allow procs with default value args in with_override Currently proc with_override does not work with procs with default value args. Fix this, and add a test-case excercising this scenario. Tested on x86_64-linux. 2023-06-13 Tom de Vries [gdb/testsuite] Fix gdb.dap/type_check.exp with older python On openSUSE Leap 15.4 with system python 3.6, I run into: ... (gdb) python check_everything()^M (gdb) FAIL: gdb.dap/type_check.exp: type checker ... In check_everything, the hasattr test fails silently: ... def check_everything(): # Older versions of Python can't really implement this. if hasattr(typing, "get_origin"): ... and that makes the gdb_test in the test-case fail. Fix this by emitting UNSUPPORTED instead in check_everything, and detecting this in the test-case. Tested on x86_64-linux. 2023-06-13 Lancelot SIX gdb/testsuite: use proper int size for gdb.dwarf2/symbol_needs_eval*.exp We recently realized that symbol_needs_eval_fail.exp and symbol_needs_eval_timeout.exp invalidly dereference an int (4 bytes on x86_64) by reading 8 bytes (the size of a pointer). Here how it goes: In gdb/testsuite/gdb.dwarf2/symbol_needs_eval.c a global variable is defined: int exec_mask = 1; and later both tests build some DWARF using the assembler doing: set exec_mask_var [gdb_target_symbol exec_mask] ... DW_TAG_variable { {DW_AT_name a} {DW_AT_type :$int_type_label} {DW_AT_location { DW_OP_addr $exec_mask_var DW_OP_deref ... } } The definition of the DW_OP_deref (from Dwarf5 2.5.1.3 Stack Operations) says that "The size of the data retrieved from the dereferenced address is the size of an address on the target machine." On x86_64, the size of an int is 4 while the size of an address is 8. The result is that when evaluating this expression, the debugger reads outside of the `a` variable. Fix this by using `DW_OP_deref_size $int_size` instead. To achieve this, this patch adds the necessary steps so we can figure out what `sizeof(int)` evaluates to for the current target. While at it, also change the definition of the int type in the assembled DWARF information so we use the actual target's size for an int instead of the literal 4. Tested on x86_64 Linux. Approved-By: Tom Tromey 2023-06-13 GDB Administrator Automatic date update in version.in 2023-06-13 Kevin Buettner Simplify case DW_OP_GNU_uninit in dwarf_expr_context::execute_stack_op Tom Tromey pointed out that the test and call to error() for the DW_OP_GNU_uninit case in dwarf_expr_context::execute_stack_op (in gdb/dwarf2/expr.c)... if (op_ptr != op_end && *op_ptr != DW_OP_piece && *op_ptr != DW_OP_bit_piece) error (_("DWARF-2 expression error: DW_OP_GNU_uninit must always " "be the very last op in a DWARF expression or " "DW_OP_piece/DW_OP_bit_piece piece.")); ...could be replaced by a call to dwarf_expr_require_composition which performs a similar check and outputs a suitable error message. 2023-06-12 Simon Farre Added self to W.A.A. maintainers 2023-06-12 Richard Bunt gdb/testsuite: Testing with the armflang compiler Currently the Fortran test suite does not run with armflang because the compiler detection fails. This in turn means fortran_runto_main does not know which main method to use to start a test case. Fortran compiler detection was added in 44d469c5f85; however, the commit message notes that it was not tested with armflang. This commit tests and fixes up a minor issue to get the detection working. The goal here is to get the tests running and preventing further regressions during future work. This change does not do anything to fix existing failures. >From what I can understand, the auto detection leverages the preprocessor to extract the Fortran compiler identity from the defines. This preprocessor output is then evaluated by the test suite to import these defines. In the case of armflang, this evaluation step is disrupted by the presence of the following warning: $ armflang -E -fdiagnostics-color=never testsuite/lib/compiler.F90 -o compiler.exp $ clang-13: warning: argument unused during compilation: '-fdiagnostics-color=never' [-Wunused-command-line-argument] The evaluation logic is already set up to filter this warning, but the prefix differs. This commit fixes the issue by updating the filter to exclude the armflang flavour of warning. gdb.fortran regression tests run with GNU, Intel and Intel LLVM. No regressions detected. The gdb.fortran test results with ACfL 23.04.1 are as follows. Before: # of expected passes 560 # of unexpected failures 113 # of unresolved testcases 2 # of untested testcases 5 # of duplicate test names 2 After: # of expected passes 5388 # of unexpected failures 628 # of known failures 10 # of untested testcases 8 # of unsupported tests 5 # of duplicate test names 5 As can be seen from the above, there are now considerably more passing assertions. Reviewed-By: Luis Machado Approved-By: Tom Tromey 2023-06-12 Tom Tromey Remove f-strings from DAP Kévin pointed out that gdb claims a minimum Python version of 3.2, but the DAP code uses f-strings, which were added in 3.6. This patch removes the uses of f-strings from the DAP code. I can't test an older version of Python, but I did confirm that this still works with the version I have. 2023-06-12 Tom Tromey Implement DAP conditional breakpoints I realized that I had only implemented DAP breakpoint conditions for exception breakpoints, and not other kinds of breakpoints. This patch corrects the oversight. 2023-06-12 Tom Tromey Do not report totalFrames from DAP stackTrace request Currently, gdb will unwind the entire stack in response to the stackTrace request. I had erroneously thought that the totalFrames attribute was required in the response. However, the spec says: If omitted or if `totalFrames` is larger than the available frames, a client is expected to request frames until a request returns less frames than requested (which indicates the end of the stack). This patch removes this from the response in order to improve performance when the stack trace is very long. 2023-06-12 Tom Tromey Implement DAP breakpointLocations request This implements the DAP breakpointLocations request. 2023-06-12 Tom Tromey Add "stop at main" extension to DAP launch request Co-workers who work on a program that uses DAP asked for the ability to have gdb stop at the main subprogram when launching. This patch implements this extension. Reviewed-By: Eli Zaretskii 2023-06-12 Tom Tromey Add "target" parameter to DAP attach request This adds a new "target" to the DAP attach request. This is passed to "target remote". I thought "attach" made the most sense for this, because in some sense gdb is attaching to a running process. It's worth noting that all DAP "attach" parameters are defined by the implementation. Reviewed-By: Eli Zaretskii 2023-06-12 Tom Tromey Handle DAP supportsVariableType capability A DAP client can report the supportsVariableType capability in the initialize request. In this case, gdb can include the type of a variable or expression in various results. Implement DAP setExpression request This implements the DAP setExpression request. 2023-06-12 Tom Tromey Add gdb.Value.assign method This adds an 'assign' method to gdb.Value. This allows for assignment without requiring the use of parse_and_eval. Reviewed-By: Eli Zaretskii 2023-06-12 Tom Tromey Add type-checking to DAP requests It occurred to me recently that gdb's DAP implementation should probably check the types of objects coming from the client. This patch implements this idea by reusing Python's existing type annotations, and supplying a decorator that verifies these at runtime. Python doesn't make it very easy to do runtime type-checking, so the core of the checker is written by hand. I haven't tried to make a fully generic runtime type checker. Instead, this only checks the subset that is needed by DAP. For example, only keyword-only functions are handled. Furthermore, in a few spots, it wasn't convenient to spell out the type that is accepted. I've added a couple of comments to this effect in breakpoint.py. I've tried to make this code compatible with older versions of Python, but I've only been able to try it with 3.9 and 3.10. 2023-06-12 Tom Tromey Use tuples for default arguments in DAP My co-worker Kévin taught me that using a mutable object as a default argument in Python is somewhat dangerous, because the object is created a single time (when the function is defined), and so if it is mutated in the body of the function, the changes will stick around. This patch changes the cases like this in DAP to use () rather than [] as the default. This patch is merely preventative, as no bugs like this are in the code. 2023-06-12 Tom Tromey Fix a latent bug in DAP request decorator The 'request' decorator is intended to also ensure that the request function runs in the DAP thread. However, the unwrapped function is installed in the global request map, so the wrapped version is never called. This patch fixes the bug. Add test for DAP pause request I neglected to write a test for the DAP "pause" request. This patch adds one. Rename one DAP function When I first started implementing DAP, I had some vague plan of having the implementation functions use the same name as the request. I abandoned this idea, but one vestige remained. This patch renames the one remaining function to be gdb-ish. Add singleThread support to some DAP requests A few DAP requests support a "singleThread" parameter, which is somewhat similar to scheduler-locking. This patch implements support for this. Implement DAP stepOut request This implements the DAP "stepOut" request. 2023-06-12 Tom Tromey Implement DAP attach request This implements the DAP "attach" request. Note that the copyright dates on the new test source file are not incorrect -- this was copied verbatim from another directory. Reviewed-By: Eli Zaretskii 2023-06-12 Tom Tromey Implement DAP setExceptionBreakpoints request This implements the DAP setExceptionBreakpoints request for Ada. This is a somewhat minimal implementation, in that "exceptionOptions" are not implemented (or advertised) -- I wasn't completely sure how this feature is supposed to work. I haven't added C++ exception handling here, but it's easy to do if needed. This patch relies on the new MI command execution support to do its work. 2023-06-12 Tom Tromey Don't require inferior execution for Ada catchpoints Currently, Ada catchpoints require that the inferior be running. However, there's no deep reason for this -- for example, C++ exception catchpoints do not have this requirement. Instead, those work like ordinary breakpoints: they are pending until the needed runtime locations are seen. This patch changes Ada catchpoints to work the same way. 2023-06-12 Tom Tromey Mark members of ada_catchpoint "private" This changes the members of ada_catchpoint to be private. Turn should_stop_exception into a method of ada_catchpoint This turns the should_stop_exception function in ada-lang.c into a method of ada_catchpoint. Combine create_excep_cond_exprs and ada_catchpoint::re_set This patch merges create_excep_cond_exprs into ada_catchpoint::re_set. This is less verbose and is also a step toward making ada_catchpoint work more like the other code_breakpoint-based exception catchpoints. Transfer ownership of exception string to ada_catchpoint This changes the ada_catchpoint to require an rvalue ref, so that ownership of the exception string can be transferred to the catchpoint object. Pass tempflag to ada_catchpoint constructor This is a minor cleanup to pass tempflag to the ada_catchpoint constructor. Use gnat_runtime_has_debug_info in Ada catchpoint tests This changes the Ada catchpoint tests to use gnat_runtime_has_debug_info. This simplifies the code. Stop gdb in gnat_runtime_has_debug_info gnat_runtime_has_debug_info starts a new gdb to do its work. However, it also leaves this gdb running, which can potentially confuse the calling test -- I encountered this when writing a new DAP test. This patch changes the proc to shut down gdb. 2023-06-12 Tom de Vries [gdb/testsuite] Relax breakpoint count check in gdb.python/py-rbreak.exp With a gdb 13.2 based package on SLE-15 aarch64, I run into: ... (gdb) PASS: gdb.python/py-rbreak.exp: nosharedlibrary py sl = gdb.rbreak("^[^_]",minsyms=False)^M Breakpoint 2 at 0x4004ac: file ../sysdeps/aarch64/crti.S, line 63.^M ... (gdb) py print(len(sl))^M 12^M (gdb) FAIL: gdb.python/py-rbreak.exp: check number of returned breakpoints is 11 ... The FAIL is due to: - the glibc object crti.o containing debug information for function call_weak_fn, and - the test-case not expecting this. The debug information is there due to compiling glibc using a binutils which contains commit 591cc9fbbfd ("gas/Dwarf: record functions"). I've run into a similar issue before, see commit 3fbbcf473a5 ("[gdb/testsuite] Fix regexp in py-rbreak.exp"). The fix I applied there was to use a regexp "^[^_]" to filter out __libc_csu_fini and __libc_csu_init, but that doesn't work for call_weak_fn. Fix this by: - reverting the regexp to "", and - rewriting the check to require at least 11 functions, rather than a precise match. Tested on x86_64-linux. PR testsuite/30538 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30538 2023-06-12 Tom de Vries [gdb/testsuite] Fix breakpoint regexp in gdb.ada/out_of_line_in_inlined.exp With a gdb 13.2 based package on openSUSE Tumbleweed i586, I ran into: ... (gdb) run ^M Starting program: out_of_line_in_inlined/foo_o224_021-all ^M [Thread debugging using libthread_db enabled]^M Using host libthread_db library "/lib/libthread_db.so.1".^M ^M Breakpoint 1.1, foo_o224_021.child1.child2 (s=...) at foo_o224_021.adb:26^M 26 for C of S loop^M (gdb) FAIL: gdb.ada/out_of_line_in_inlined.exp: scenario=all: \ run to foo_o224_021.child1.child2 ... I can reproduce the same issue with gdb trunk on x86_64, by using optimize=-O3 instead of optimize=-O2. Fix this by using $bkptno_num_re. Tested on x86_64-linux. PR testsuite/30539 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30539 2023-06-12 Tom de Vries [gdb/tui] Replace macro HELP_ATTRIBUTE_MODE with std::string Replace macro HELP_ATTRIBUTE_MODE with a std::string. Tested on x86_64-linux. Reviewed-By: Bruno Larsen Reviewed-By: Tom Tromey 2023-06-12 mengqinggang LoongArch: gas: Relocations simplification when -mno-relax Gas does not emit ADD/SUB relocation pairs for label differences when -mno-relax. 2023-06-12 GDB Administrator Automatic date update in version.in 2023-06-11 Kevin Buettner Permit DW_OP_GNU_uninit to be used with DW_OP_piece This commit implements a fix for a bug reported against GDB on Fedora bugzilla... https://bugzilla.redhat.com/show_bug.cgi?id=2166796 The test case in that bug report involved running gdb against the 'jq' program (which is a command-line JSON processor) on Fedora 37. Since the debug info is compiler (and compile-time option) dependent, it won't necessarily show up in other distributions or even past or future versions of Fedora. (E.g. when trying the example shown below on Fedora 38, GDB says that the value of 'value' has been optimized out. I.e. it does not demonstrate the same DWARF error that can be see when using Fedora 37.) That said, on Fedora 37, the bug could be reproduced as follows: [kev@f37-1 ~]$ gdb jq -q -ex 'b src/util.c:415' -ex 'r Enable debuginfod for this session? (y or [n]) y Debuginfod has been enabled. To make this setting permanent, add 'set debuginfod enabled on' to .gdbinit. Reading symbols from /home/kev/.cache/debuginfod_client/9d3c8b4197350a190a74972d481de32abf641aa4/debuginfo... No source file named src/util.c. Make breakpoint pending on future shared library load? (y or [n]) y Breakpoint 1 (src/util.c:415) pending. Starting program: /usr/bin/jq parser == NULL) { (gdb) p value DWARF-2 expression error: DW_OP_GNU_uninit must always be the very last op. This is undesirable - rather than output an error about the DWARF info, we'd prefer to see a value, even if it is uninitialized. Examination of the debuginfo showed the following: <1><468f1>: Abbrev Number: 112 (DW_TAG_subprogram) <468f2> DW_AT_external : 1 <468f2> DW_AT_name : (indirect string, offset: 0x4781): jq_util_input_next_input <468f6> DW_AT_decl_file : 10 <468f6> DW_AT_decl_line : 411 <468f8> DW_AT_decl_column : 4 <468f9> DW_AT_prototyped : 1 <468f9> DW_AT_type : <0x3f2> <468fd> DW_AT_sibling : <0x4692e> ... <2><46921>: Abbrev Number: 102 (DW_TAG_variable) <46922> DW_AT_name : (indirect string, offset: 0x8cb): value <46926> DW_AT_decl_file : 10 <46926> DW_AT_decl_line : 414 <46928> DW_AT_decl_column : 6 <46929> DW_AT_type : <0x3f2> Note that there's no DW_AT_location, so I looked for an abstract origin entry: <2><2dfa0>: Abbrev Number: 90 (DW_TAG_variable) <2dfa1> DW_AT_abstract_origin: <0x46921> <2dfa5> DW_AT_location : 0x27cf1 (location list) <2dfa9> DW_AT_GNU_locviews: 0x27ce1 (Note that the DW_AT_abstract_origin attribute's value is 0x46921 which is the DIE for the local variable "value".) Looking at the location list, I see: 00027cf1 v000000000000000 v000000000000000 views at 00027ce1 for: 000000000002f8fe 000000000002f92e (DW_OP_reg13 (r13); DW_OP_GNU_uninit; DW_OP_piece: 8; DW_OP_reg12 (r12); DW_OP_GNU_uninit; DW_OP_piece: 8) While DW_OP_GNU_uninit is not the very last op, it is the last op prior to DW_OP_piece. The fix involved changing the DW_OP_GNU_uninit case in dwarf_expr_context::execute_stack_op in gdb/dwarf2/expr.c so that DW_OP_GNU_uninit may appear just before DW_OP_piece. With the fix in place, attempting to print 'value' now looks like this: (gdb) p value $1 = [uninitialized] {kind_flags = 0 '\000', pad_ = 0 '\000', offset = 0, size = 0, u = {ptr = 0x0, number = 0}} Note that "[uninitialized]" is part of the output. (But also note that there's an extra space character.) I've made a new test case, gdb.dwarf2/DW_OP_piece_with_DW_OP_GNU_uninit.exp, by adapting an existing one, gdb.dwarf2/opt-out-not-implptr.exp. Since it uses the DWARF assembler, the test case does not depend on a specific compiler version or compiler options. Tested on Fedora 37 and Fedora 38. 2023-06-11 GDB Administrator Automatic date update in version.in 2023-06-10 GDB Administrator Automatic date update in version.in 2023-06-09 Indu Bhagat libsframe: testsuite: add sframe_find_fre tests for pltN entries Add a new test plt-findfre-1 to ensure lookup of SFrame stack trace information for pltN entries is correct. In this test, a dummy SFrame FDE of type SFRAME_FDE_TYPE_PCMASK is created. The size of the 'function code block' covered by the SFrame FDE is equivalent to 5 pltN entries of 16 bytes each. The test first looks up SFrame FREs for some addresses in the first pltN entry, followed by lookups for some addresses in the fourth pltN entry. libsframe/ * Makefile.in: Regenerated. * testsuite/libsframe.find/find.exp: Add new test. * testsuite/libsframe.find/local.mk: Likewise. * testsuite/libsframe.find/plt-findfre-1.c: New test. 2023-06-09 Indu Bhagat libsframe: fix sframe_find_fre for pltN entries To find SFrame stack trace information from an FDE of type SFRAME_FDE_TYPE_PCMASK, sframe_find_fre () was doing an operation like, (start_ip_offset & 0xff) >= (pc & 0xff), etc. This is buggy and needs correction. The mask 0xff should be 0xf (to work for a pltN entry of size say, 16 bytes). At this time, the size of the pltN entry is implicitly assumed to be 16 bytes by libsframe. In next version of the SFrame format, we can encode this information explicitly in the SFrame FDE. For now, we should fix the code to at least behave correctly for the generated code and the generated SFrame stack trace information for the pltN entries on x86_64. libsframe/ * sframe.c (sframe_find_fre): Correct the bitmask used for SFrame FDEs of type SFRAME_FDE_TYPE_PCMASK. 2023-06-09 Luis Machado [AArch64,arm] Fix some formatting issues in the aarch64/arm codebase As noted by Tom Tromey, there are some formatting issues with the ternary operator in the aarch64/arm codebase. This patch fixes those. Reviewed-By: Tom Tromey 2023-06-09 Tom de Vries [gdb/tui] Simplify tui_puts_internal Simplify tui_puts_internal by using continue, as per this [1] coding standard rule, making the function more readable and easier to understand. No functional changes. Tested on x86_64-linux. [1] https://llvm.org/docs/CodingStandards.html#use-early-exits-and-continue-to-simplify-code Reviewed-By: Tom Tromey 2023-06-09 Tom de Vries [gdb/tui] Delete line buffer when switching to singlekey Say we're in TUI mode, and type "sun": ... (gdb) sun ... After switching to SingleKey mode using C-x s, we have just: ... sun ... After typing "d", we get: ... sun Undefined command: "sundown". Try "help". ... The SingleKey "d" is supposed run the "down" command. Fix this by clearing the readline line buffer when switching to SingleKey mode. Tested on x86_64-linux. PR tui/30522 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30522 Reviewed-By: Tom Tromey 2023-06-09 Tom de Vries [gdb/testsuite] Add test-case gdb.tui/single-key.exp I noticed that there's no test-case excercising SingleKey mode, so add a test-case. Tested on x86_64-linux. Reviewed-By: Tom Tromey 2023-06-09 Andrew Burgess gdb/debuginfod: cleanup debuginfod earlier A GDB crash was discovered on Fedora GDB that was tracked back to an issue with the way that debuginfod is cleaned up. The bug was reported on Fedora 37, 38, and 39. Here are the steps to reproduce: 1. The file /etc/ssl/openssl.cnf contains the following lines: [provider_sect] default = default_sect ##legacy = legacy_sect ## [default_sect] activate = 1 ##[legacy_sect] ##activate = 1 The bug will occur when the '##' characters are removed so that the lines in question look like this: [provider_sect] default = default_sect legacy = legacy_sect [default_sect] activate = 1 [legacy_sect] activate = 1 2. Clean up any existing debuginfod cache data: > rm -rf $HOME/.cache/debuginfod_client 3. Run GDB: > gdb -nx -q -iex 'set trace-commands on' \ -iex 'set debuginfod enabled on' \ -iex 'set confirm off' \ -ex 'start' -ex 'quit' /bin/ls +set debuginfod enabled on +set confirm off Reading symbols from /bin/ls... Downloading separate debug info for /usr/bin/ls ... snip ... Temporary breakpoint 1, main (argc=1, argv=0x7fffffffde38) at ../src/ls.c:1646 1646 { +quit Fatal signal: Segmentation fault ----- Backtrace ----- ... snip ... So GDB ends up crashing during exit. What's happening is that when debuginfod is initialised debuginfod_begin is called (this is in the debuginfod library), this in turn sets up libcurl, which makes use of openssl. Somewhere during this setup process an at_exit function is registered to cleanup some state. Back in GDB the debuginfod_client object is managed using this code: /* Deleter for a debuginfod_client. */ struct debuginfod_client_deleter { void operator() (debuginfod_client *c) { debuginfod_end (c); } }; using debuginfod_client_up = std::unique_ptr; And then a global debuginfod_client_up is created to hold a pointer to the debuginfod_client object. As a global this will be cleaned up using the standard C++ global object destructor mechanism, which is run after the at_exit handlers. However, it is expected that when debuginfod_end is called the debuginfod_client object will still be in a usable state, that is, we don't expect the at_exit handlers to have run and started cleaning up the library state. To fix this issue we need to ensure that debuginfod_end is called before the at_exit handlers have a chance to run. This commit removes the debuginfod_client_up type, and instead has GDB hold a raw pointer to the debuginfod_client object. We then make use of GDB's make_final_cleanup to register a function that will call debuginfod_end. As GDB's final cleanups are called before exit is called, this means that debuginfod_end will be called before the at_exit handlers are called, and the crash identified above is resolved. It's not obvious how this issue can easily be tested for. The bug does not appear to manifest when using a local debuginfod server, so we'd need to setup something more involved. For now I'm proposing this patch without any associated tests. Co-Authored-By: Mark Wielaard Co-Authored-By: Simon Marchi Reviewed-By: Tom Tromey Reviewed-By: Aaron Merey 2023-06-09 Andrew Burgess gdb: fix ASan failure after recent string changes After this commit: commit baab375361c365afee2577c94cbbd3fdd443d6da Date: Tue Jul 13 14:44:27 2021 -0400 gdb: building inferior strings from within GDB It was pointed out that a new ASan failure had been introduced which was triggered by gdb.base/internal-string-values.exp: (gdb) PASS: gdb.base/internal-string-values.exp: test_setting: all langs: lang=ada: ptype "foo" print $_gdb_maint_setting("test-settings string") ================================================================= ==80377==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x603000068034 at pc 0x564785cba682 bp 0x7ffd20644620 sp 0x7ffd20644610 READ of size 1 at 0x603000068034 thread T0 #0 0x564785cba681 in find_command_name_length(char const*) /tmp/src/binutils-gdb/gdb/cli/cli-decode.c:2129 #1 0x564785cbacb2 in lookup_cmd_1(char const**, cmd_list_element*, cmd_list_element**, std::__cxx11::basic_string, std::allocator >*, int, bool) /tmp/src/binutils-gdb/gdb/cli/cli-decode.c:2186 #2 0x564785cbb539 in lookup_cmd_1(char const**, cmd_list_element*, cmd_list_element**, std::__cxx11::basic_string, std::allocator >*, int, bool) /tmp/src/binutils-gdb/gdb/cli/cli-decode.c:2248 #3 0x564785cbbcf3 in lookup_cmd(char const**, cmd_list_element*, char const*, std::__cxx11::basic_string, std::allocator >*, int, int) /tmp/src/binutils-gdb/gdb/cli/cli-decode.c:2339 #4 0x564785c82df2 in setting_cmd /tmp/src/binutils-gdb/gdb/cli/cli-cmds.c:2219 #5 0x564785c84274 in gdb_maint_setting_internal_fn /tmp/src/binutils-gdb/gdb/cli/cli-cmds.c:2348 #6 0x564788167b3b in call_internal_function(gdbarch*, language_defn const*, value*, int, value**) /tmp/src/binutils-gdb/gdb/value.c:2321 #7 0x5647854b6ebd in expr::ada_funcall_operation::evaluate(type*, expression*, noside) /tmp/src/binutils-gdb/gdb/ada-lang.c:11254 #8 0x564786658266 in expression::evaluate(type*, noside) /tmp/src/binutils-gdb/gdb/eval.c:111 #9 0x5647871242d6 in process_print_command_args /tmp/src/binutils-gdb/gdb/printcmd.c:1322 #10 0x5647871244b3 in print_command_1 /tmp/src/binutils-gdb/gdb/printcmd.c:1335 #11 0x564787125384 in print_command /tmp/src/binutils-gdb/gdb/printcmd.c:1468 #12 0x564785caac44 in do_simple_func /tmp/src/binutils-gdb/gdb/cli/cli-decode.c:95 #13 0x564785cc18f0 in cmd_func(cmd_list_element*, char const*, int) /tmp/src/binutils-gdb/gdb/cli/cli-decode.c:2735 #14 0x564787c70c68 in execute_command(char const*, int) /tmp/src/binutils-gdb/gdb/top.c:574 #15 0x564786686180 in command_handler(char const*) /tmp/src/binutils-gdb/gdb/event-top.c:543 #16 0x56478668752f in command_line_handler(std::unique_ptr >&&) /tmp/src/binutils-gdb/gdb/event-top.c:779 #17 0x564787dcb29a in tui_command_line_handler /tmp/src/binutils-gdb/gdb/tui/tui-interp.c:104 #18 0x56478668443d in gdb_rl_callback_handler /tmp/src/binutils-gdb/gdb/event-top.c:250 #19 0x7f4efd506246 in rl_callback_read_char (/usr/lib/libreadline.so.8+0x3b246) (BuildId: 092e91fc4361b0ef94561e3ae03a75f69398acbb) #20 0x564786683dea in gdb_rl_callback_read_char_wrapper_noexcept /tmp/src/binutils-gdb/gdb/event-top.c:192 #21 0x564786684042 in gdb_rl_callback_read_char_wrapper /tmp/src/binutils-gdb/gdb/event-top.c:225 #22 0x564787f1b119 in stdin_event_handler /tmp/src/binutils-gdb/gdb/ui.c:155 #23 0x56478862438d in handle_file_event /tmp/src/binutils-gdb/gdbsupport/event-loop.cc:573 #24 0x564788624d23 in gdb_wait_for_event /tmp/src/binutils-gdb/gdbsupport/event-loop.cc:694 #25 0x56478862297c in gdb_do_one_event(int) /tmp/src/binutils-gdb/gdbsupport/event-loop.cc:264 #26 0x564786df99f0 in start_event_loop /tmp/src/binutils-gdb/gdb/main.c:412 #27 0x564786dfa069 in captured_command_loop /tmp/src/binutils-gdb/gdb/main.c:476 #28 0x564786dff61f in captured_main /tmp/src/binutils-gdb/gdb/main.c:1320 #29 0x564786dff75c in gdb_main(captured_main_args*) /tmp/src/binutils-gdb/gdb/main.c:1339 #30 0x564785381b6d in main /tmp/src/binutils-gdb/gdb/gdb.c:32 #31 0x7f4efbc3984f (/usr/lib/libc.so.6+0x2384f) (BuildId: 2f005a79cd1a8e385972f5a102f16adba414d75e) #32 0x7f4efbc39909 in __libc_start_main (/usr/lib/libc.so.6+0x23909) (BuildId: 2f005a79cd1a8e385972f5a102f16adba414d75e) #33 0x564785381934 in _start (/tmp/build/binutils-gdb/gdb/gdb+0xabc5934) (BuildId: 90de353ac158646e7dab501b76a18a76628fca33) 0x603000068034 is located 0 bytes after 20-byte region [0x603000068020,0x603000068034) allocated by thread T0 here: #0 0x7f4efcee0cd1 in __interceptor_calloc /usr/src/debug/gcc/gcc/libsanitizer/asan/asan_malloc_linux.cpp:77 #1 0x5647856265d8 in xcalloc /tmp/src/binutils-gdb/gdb/alloc.c:97 #2 0x564788610c6b in xzalloc(unsigned long) /tmp/src/binutils-gdb/gdbsupport/common-utils.cc:29 #3 0x56478815721a in value::allocate_contents(bool) /tmp/src/binutils-gdb/gdb/value.c:929 #4 0x564788157285 in value::allocate(type*, bool) /tmp/src/binutils-gdb/gdb/value.c:941 #5 0x56478815733a in value::allocate(type*) /tmp/src/binutils-gdb/gdb/value.c:951 #6 0x5647854ae81c in expr::ada_string_operation::evaluate(type*, expression*, noside) /tmp/src/binutils-gdb/gdb/ada-lang.c:10675 #7 0x5647854b63b8 in expr::ada_funcall_operation::evaluate(type*, expression*, noside) /tmp/src/binutils-gdb/gdb/ada-lang.c:11184 #8 0x564786658266 in expression::evaluate(type*, noside) /tmp/src/binutils-gdb/gdb/eval.c:111 #9 0x5647871242d6 in process_print_command_args /tmp/src/binutils-gdb/gdb/printcmd.c:1322 #10 0x5647871244b3 in print_command_1 /tmp/src/binutils-gdb/gdb/printcmd.c:1335 #11 0x564787125384 in print_command /tmp/src/binutils-gdb/gdb/printcmd.c:1468 #12 0x564785caac44 in do_simple_func /tmp/src/binutils-gdb/gdb/cli/cli-decode.c:95 #13 0x564785cc18f0 in cmd_func(cmd_list_element*, char const*, int) /tmp/src/binutils-gdb/gdb/cli/cli-decode.c:2735 #14 0x564787c70c68 in execute_command(char const*, int) /tmp/src/binutils-gdb/gdb/top.c:574 #15 0x564786686180 in command_handler(char const*) /tmp/src/binutils-gdb/gdb/event-top.c:543 #16 0x56478668752f in command_line_handler(std::unique_ptr >&&) /tmp/src/binutils-gdb/gdb/event-top.c:779 #17 0x564787dcb29a in tui_command_line_handler /tmp/src/binutils-gdb/gdb/tui/tui-interp.c:104 #18 0x56478668443d in gdb_rl_callback_handler /tmp/src/binutils-gdb/gdb/event-top.c:250 #19 0x7f4efd506246 in rl_callback_read_char (/usr/lib/libreadline.so.8+0x3b246) (BuildId: 092e91fc4361b0ef94561e3ae03a75f69398acbb) The problem is in cli/cli-cmds.c, in the function setting_cmd, where we do this: const char *a0 = (const char *) argv[0]->contents ().data (); Here argv[0] is a value* which we know is either a TYPE_CODE_ARRAY or a TYPE_CODE_STRING. The problem is that the above line is casting the value contents directly to a C-string, i.e. one that is assumed to have a null-terminator at the end. After the above commit this can no longer be assumed to be true. A string value will be represented just as it would be in the current language, so for Ada and Fortran the string will be an array of characters with no null-terminator at the end. My proposed solution is to copy the string contents into a std::string object, and then use the std::string::c_str() value, this will ensure that a null-terminator has been added. I had a check through GDB at places TYPE_CODE_STRING was used and couldn't see any other obvious places where this type of assumption was being made, so hopefully this is the only offender. Running the above test with ASan compiled in no longer gives an error. Reviewed-By: Tom Tromey 2023-06-09 Tom Tromey Use scoped_value_mark in two more places I found a couple of spots that could use scoped_value_mark. One of them is a spot that didn't consider the possibility that value_mark can return NULL. I tend to doubt this can be seen in this context, but nevertheless this is safer. Regression tested on x86-64 Fedora 36. 2023-06-09 Tom de Vries [gdb] Fix typos Fix typos: - reponse -> response - inital -> initial - a -> an 2023-06-09 Alan Modra readelf/objdump remember_state memory leaks * dwarf.c (display_debug_frames ): Do free invalid remember_state. 2023-06-09 Alan Modra ecoff find_nearest_line and final link leaks Freeing ecoff_debug_info "pointers to the unswapped symbolic info" isn't a simple matter, due to differing allocation strategies. In _bfd_ecoff_slurp_symbolic_info the pointers are to objalloc memory. In the ecoff linker they are to separately malloc'd memory. In gas we have most (obj-elf) or all (obj-ecoff) into a single malloc'd buffer. This patch fixes the leaks for binutils and ld, leaving the gas leaks for another day. The mips elf backend already had this covered, and the ecoff backend had a pointer, raw_syments used as a flag, so most of the patch is moving these around a little so they are accessible for both ecoff and elf. include/ * coff/ecoff.h (struct ecoff_debug_info): Add alloc_syments. bfd/ * libecoff.h (struct ecoff_tdata): Delete raw_syments. * elfxx-mips.c (free_ecoff_debug): Delete. Replace uses with _bfd_ecoff_free_ecoff_debug_info. (_bfd_mips_elf_final_link): Init debug.alloc_syments. * ecofflink.c (_bfd_ecoff_free_ecoff_debug_info): New function. * ecoff.c (_bfd_ecoff_bfd_free_cached_info): Call _bfd_ecoff_free_ecoff_debug_info. (_bfd_ecoff_slurp_symbolic_info): Replace uses of raw_syments with alloc_syments. (ecoff_final_link_debug_accumulate): Likewise. Use _bfd_ecoff_free_ecoff_debug_info. (_bfd_ecoff_bfd_copy_private_bfd_data): Set alloc_syments for copied output. * elf64-alpha.c (elf64_alpha_read_ecoff_info): Use _bfd_ecoff_free_ecoff_debug_info. * libbfd-in.h (_bfd_ecoff_free_ecoff_debug_info): Declare. * libbfd.h: Regenerate. gas/ * config/obj-ecoff.c (ecoff_frob_file): Set alloc_syments. * config/obj-elf.c (elf_frob_file_after_relocs): Likewise. 2023-06-09 GDB Administrator Automatic date update in version.in 2023-06-08 Tom de Vries [gdb/testsuite] Add test-case gdb.tui/long-prompt.exp I noticed that the test-suite doesn't excercise the case in tui_redisplay_readline that height (initially 1) is changed by this call: ... tui_puts_internal (w, prompt, &height); ... Add a test-case that excercises this. Tested on x86_64-linux. 2023-06-08 Lancelot SIX gdb/corelow.c: do not try to reopen a file if open failed once In the current implementation, core_target::build_file_mappings will try to locate and open files which were mapped in the process for which the core dump was produced. If the file cannot be found or cannot be opened, GDB will re-try to open it once for each time it was mapped in the process's address space. This patch makes it so GDB recognizes that it has already failed to open a given file once and does not re-try the process for each mapping. Reviewed-By: John Baldwin Approved-By: Andrew Burgess 2023-06-08 Lancelot SIX gdb/corelow.c: avoid repeated warnings in build_file_mappings When GDB opens a coredump it tries to locate and then open all files which were mapped in the process. If a file is found but cannot be opened with BFD (bfd_open / bfd_check_format fails), then a warning is printed to the user. If the same file was mapped multiple times in the process's address space, the warning is printed once for each time the file was mapped. I find this un-necessarily noisy. This patch makes it so the warning message is printed only once per file. There was a comment in the code assuming that if the file was found on the system, opening it (bfd_open + bfd_check_format) should always succeed. A recent change in BFD (014a602b86f "Don't optimise bfd_seek to same position") showed that this assumption is not valid. For example, it is possible to have a core dump of a process which had mmaped an IO page from a DRI render node (/dev/dri/runderD$NUM). In such case the core dump does contain the information that portions of this special file were mapped in the host process, but trying to seek to position 0 will fail, making bfd_check_format fail. This patch removes this comment. Reviewed-By: John Baldwin Approved-By: Andrew Burgess 2023-06-08 Lancelot SIX gdb/corelow.c: fix use-after-free in build_file_mappings In core_target::build_file_mappings, GDB tries to open files referenced in the core dump. The process goes like this: struct bfd *bfd = bfd_map[filename]; if (bfd == nullptr) { bfd = bfd_map[filename] = bfd_openr (expanded_fname.get (), "binary"); if (bfd == nullptr || !bfd_check_format (bfd, bfd_object)) { if (bfd != nullptr) bfd_close (bfd); return; } } asection *sec = bfd_make_section_anyway (bfd, "load"); ... The problem is that if bfd_check_format fails, we close the bfd but keep a reference to it in the bfd_map. If the same filename appears another time in the NT_FILE note, we enter this code again. The second time, bfd_map[filename] is not nullptr and we try to call bfd_make_section_anyway on an already closed BFD, which is a use-after-free error. This patch makes sure that the bfd is only saved in the bfd_map if it got opened successfully. This error got exposed by a recent change in BFD (014a602b86f "Don't optimise bfd_seek to same position"). Since this change, opening a coredump which contains mapping to some special files such as a DRI render node (/dev/dri/renderD$NUM) exposes the issue. This happens for example for processes using AMDGPU devices to offload compute tasks. Reviewed-By: John Baldwin Approved-By: Andrew Burgess 2023-06-08 Alan Modra Re: _bfd_free_cached_info Oops, another leak caused by not defining the correct macro. * elf32-mips.c: Define bfd_elf32_bfd_free_cached_info. * elfn32-mips.c: Likewise. * elf64-mips.c: Define bfd_elf64_bfd_free_cached_info. 2023-06-08 Alan Modra Re: _bfd_free_cached_info ELF targets with target-specific free_cache_info functions need to call _bfd_elf_free_cached_info, not _bfd_generic_bfd_free_cached_info. * elf64-ppc.c (ppc64_elf_free_cached_info): Call _bfd_elf_free_cached_info. * elfnn-aarch64.c (elfNN_aarch64_bfd_free_cached_info): Likewise. 2023-06-08 GDB Administrator Automatic date update in version.in 2023-06-07 Indu Bhagat libsframe: reuse static function sframe_decoder_get_funcdesc_at_index sframe_decoder_get_funcdesc_at_index () is the function to access SFrame FDEs in the SFrame decoder context. Use it consistently. Avoid unnecessary type cast and include minor enhancements as the code is moved around. libsframe/ * sframe.c (sframe_decoder_get_funcdesc_at_index): Move some checks here. Move the static function definition before the new use. (sframe_decoder_get_funcdesc): Use sframe_decoder_get_funcdesc_at_index instead. 2023-06-07 Tom Tromey Simplify ada_lookup_struct_elt_type This patch simplifies ada_lookup_struct_elt_type by changing it to call find_struct_field. The two functions were substantially similar, even to the point of having identical comments. I tested this using both the gdb test suite and the internal AdaCore test suite. Given this and the fact that it is Ada-specific, I am checking it in. 2023-06-07 Nick Clifton Add extra linker warning message about discrepancies between normal and common symbols. PR 30499 bfd * elflink.c (elf_link_add_object_symbols): Add a message indicating that alignment and size discrepancies between the definition of common symbols and normal symbols are serious and should be investigated. ld * testsuite/ld-elfcomm/elfcomm.exp: Update regexps to match new output from the linker. 2023-06-07 Tom de Vries [gdb/tui] Factor out border-mode help text I noticed that the help texts for tui border-mode and tui active-border-mode are similar. Factor out the common part into macro HELP_ATTRIBUTE_MODE. Tested on x86_64-linux. 2023-06-07 Tom de Vries [gdb/cli] Handle pending ^C after rl_callback_read_char for readline 7 In commit faf01aee1d0 ("[gdb] Handle pending ^C after rl_callback_read_char") we handled a problem (described in detail in that commit) for readline >= 8 using public readline functions rl_pending_signal and rl_check_signals. For readline 7 (note that we require at least readline 7 so there's no need to worry about readline 6), there was no fix though, because rl_check_signals was not available. Fix this by instead using the private readline function _rl_signal_handler. There is precedent for using private readline variables and functions, but it's something we want to get rid of (PR build/10723). Nevertheless, I think we can allow this specific instance because it's not used when building against readline >= 8. [ In the meanwhile, a fix was committed in the devel branch of the readline repo, contained in commit 8d0c439 ("rollup of changes since readline-8.2"), first proposed here ( https://lists.gnu.org/archive/html/bug-readline/2022-10/msg00008.html ). ] Tested on x86_64-linux, against system readline 7.0 on openSUSE Leap 15.4. PR cli/27813 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27813 2023-06-07 Tom de Vries Fix PR30369 regression on aarch64/arm (PR30506) The gdb.dwarf2/dw2-prologue-end-2.exp test was failing for both AArch64 and Arm. As Tom pointed out here (https://inbox.sourceware.org/gdb-patches/6663707c-4297-c2f2-a0bd-f3e84fc62aad@suse.de/), there are issues with both the prologue skipper for AArch64 and Arm and an incorrect assumption by the testcase. This patch fixes both of AArch64's and Arm's prologue skippers to not skip past the end of a function. It also incorporates a fix to the testcase so it doesn't assume the prologue skipper will stop at the first instruction of the functions/labels. Regression-tested on aarch64-linux/arm-linux Ubuntu 20.04/22.04 and x86_64-linux Ubuntu 20.04. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30506 Co-Authored-By: Tom de Vries Co-Authored-By: Luis Machado 2023-06-07 Tom de Vries [gdb/testsuite] Add missing wait in gdb.python/tui-window-disabled.exp While working on PR tui/30526, I noticed a bug in test-case gdb.python/tui-window-disabled.exp. Here we send "tui enable" to gdb, but don't wait for it to arrive before checking for a window box: ... send_gdb "tui enable\n" Term::check_box "check for python window" 0 0 80 16 ... Fix this by waiting for the prompt to be issued in TUI before doing the check. Tested on x86_64-linux. 2023-06-07 Tom de Vries [gdb/testsuite] Fix two typos in gdb.python/tui-window-disabled.exp Fix two typos in test-case gdb.python/tui-window-disabled.exp. 2023-06-07 Tom de Vries [gdb/testsuite] Handle output after prompt in gdb.threads/step-N-all-progress.exp Using "taskset -c 0" I run into this timeout: ... (gdb) PASS: gdb.threads/step-N-all-progress.exp: non-stop=on: \ target-non-stop=on: continue to breakpoint: break here next 3^M [New Thread 0x7ffff7dbd6c0 (LWP 10202)]^M 50 return 0;^M (gdb) [Thread 0x7ffff7dbd6c0 (LWP 10202) exited]^M FAIL: gdb.threads/step-N-all-progress.exp: non-stop=on: target-non-stop=on: \ next 3 (timeout) ... The problem is that this test: ... gdb_test "next 3" "return 0;" ... expects no output after the prompt. Fix this by using -no-prompt-anchor. Tested on x86_64-linux. 2023-06-07 Alan Modra ld-elf/eh5 remove xfail hppa64 Commit cb81e84c72 resulted in an xpass for hppa64-hp-hpux11, but the test still fails on hpp64-linux. Let's make it pass for hppa64-linux too, by accepting pcrel sdata8 encoding in the augmentation data. 2023-06-07 Luis Machado Fix gdb.base/memtag.exp failure While running this test on an emulator, I noticed we're failing to match the output message when "memory-tag check" is issued with no arguments. That's because I coded the message using "error" and missed a period at the end. Other similar messages are issued with error_no_arg. This patch changes that call to use error_no_arg. Tested on aarch64-linux Ubuntu 20.04/22.04. 2023-06-07 Alan Modra _bfd_free_cached_info doc/bfdint.texi and comments in the aout and som code about this function are just wrong, and its name is not very apt. Better would be _bfd_mostly_destroy, and we certainly should not be saying anything about the possibility of later recreating anything lost by this function. What's more, if _bfd_free_cached_info is called when creating an archive map to reduce memory usage by throwing away symbols, the target _close_and_cleanup function won't have access to tdata or section bfd_user_data to tidy memory. This means most of the target _close_and_cleanup function won't do anything, and therefore sometimes will result in memory leaks. This patch fixes the documentation problems and moves most of the target _close_and_cleanup code to target _bfd_free_cached_info. Another notable change is that bfd_generic_bfd_free_cached_info is now defined as _bfd_free_cached_info rather than _bfd_bool_bfd_true, ie. the default now frees objalloc memory. 2023-06-07 Alan Modra Memory leaks in bfd/vms-lib.c * vms-lib.c (vms_lib_read_index): Free malloc'd memory on error return paths. (vms_write_index, _bfd_vms_lib_write_archive_contents): Likewise. bfd/elf.c strtab memory leak * elf.c (_bfd_elf_compute_section_file_positions): Free strtab on set_group_contents failure return path. 2023-06-07 Alan Modra objcopy memory leaks after errors These aren't important at all, but tidy them in case they obscure other more important leaks. * objcopy (copy_file): Close input bfd after errors. 2023-06-07 GDB Administrator Automatic date update in version.in 2023-06-06 Indu Bhagat libsframe: fix cosmetic issues and typos include/ * sframe-api.h (sframe_decoder_get_num_fidx): Use extern. libsframe/ * sframe-dump.c (dump_sframe_func_with_fres): Fix line length. * sframe.c (sframe_frame_row_entry_copy): Likewise. (sframe_decode_fre_start_address): Use the intended type uint32_t. 2023-06-06 Alan Modra Re: loongarch readelf support Commit 89c70cd358b8 apparently results in a bogus "value may be used uninitialized" warning with some combination of compiler and optimisation options. * readelf.c (target_specific_reloc_handling): Init value. 2023-06-06 GDB Administrator Automatic date update in version.in 2023-06-05 Indu Bhagat libsframe: avoid unnecessary type casts Change the data type of some of the members of the sframe_decoder_ctx and sframe_encoder_ctx data structures to use the applicable data types explicitly. Current implementation in libsframe does type casts, which seem unnecessary. libsframe/ * libsframe/sframe-impl.h (struct sframe_decoder_ctx): Use applicable data type explicitly. (struct sframe_encoder_ctx): Likewise. Use same style of comments consistently. * libsframe/sframe.c (struct sf_fde_tbl): Define without typedef. (struct sf_fre_tbl): Likewise. (sframe_decode): Remove unnecessary type casts. (sframe_encoder_get_funcdesc_at_index): Likewise. (sframe_encoder_add_fre): Likewise. (sframe_encoder_add_funcdesc): Likewise. (sframe_sort_funcdesc): Likewise. (sframe_encoder_write_sframe): Likewise. 2023-06-05 H.J. Lu ELF: Add "#pass" to ld-elf/pr30508.d Add "#pass" to ld-elf/pr30508.d to allow extra segments. PR binutils/30508 * testsuite/ld-elf/pr30508.d: Add "#pass". 2023-06-05 Tom Tromey Use unrelocated_addr in dwarf2_fde This changes dwarf2_fde to use the unrelocated_addr type. This pointed out a latent bug in dwarf2_frame_cache, where a relocated address is compared to an unrelocated address. 2023-06-05 Tom Tromey Use local "text offset" variable in dwarf2_frame_cache A few spots in dwarf2_frame_cache use: cache->per_objfile->objfile->text_section_offset () ... and a subsequent patch will add more, so move this into a local variable. 2023-06-05 Tom Tromey Constify dwarf2_cie::augmentation I noticed that dwarf2_cie::augmentation could be 'const'. Use "unrelocated" terminology in linetable_entry I forgot to convert struct linetable_entry to use the "unrelocated" (as opposed to "raw") terminology. This patch corrects the oversight. Fix comment in address_class enum address_class has a stale comment referring to MSYMBOL_VALUE_RAW_ADDRESS, which no longer exists. This patch updates the comment. Use unrelocated_addr in dwarf_decode_lines This changes dwarf_decode_lines to accept an unrelocated_addr and fixes up the fallout. Use unrelocated_addr in the DWARF reader This changes various spots in the DWARF reader to use unrelocated_addr. Move unrelocated_addr to common-types.h unrelocated_addr is currently defined in symtab.h, but in order to avoid having to include that in more places, I wanted to move the type elsewhere. I considered defs.h, but it seemed reasonable to have it next to CORE_ADDR, which is what this patch does. Minor cleanup in loclist_describe_location loclist_describe_location already has a per_objfile local variable, so use it consistently. Remove baseaddr parameter from dwarf2_record_block_ranges dwarf2_record_block_ranges is only ever called with the text section offset, so this patch removes the parameter entirely. This makes a subsequent patch a little simpler. 2023-06-05 H.J. Lu ELF: Don't warn an empty PT_LOAD with the program headers When rewriting the program headers, don't warn an empty PT_LOAD with the program headers. bfd/ PR binutils/30508 * elf.c (rewrite_elf_program_header): Don't warn if an empty PT_LOAD contains the program headers. ld/ PR binutils/30508 * testsuite/ld-elf/pr30508.d: New file. * testsuite/ld-elf/pr30508.s: Likewise. 2023-06-05 Andrew Burgess gdb: building inferior strings from within GDB History Of This Patch ===================== This commit aims to address PR gdb/21699. There have now been a couple of attempts to fix this issue. Simon originally posted two patches back in 2021: https://sourceware.org/pipermail/gdb-patches/2021-July/180894.html https://sourceware.org/pipermail/gdb-patches/2021-July/180896.html Before Pedro then posted a version of his own: https://sourceware.org/pipermail/gdb-patches/2021-July/180970.html After this the conversation halted. Then in 2023 I (Andrew) also took a look at this bug and posted two versions: https://sourceware.org/pipermail/gdb-patches/2023-April/198570.html https://sourceware.org/pipermail/gdb-patches/2023-April/198680.html The approach taken in my first patch was pretty similar to what Simon originally posted back in 2021. My second attempt was only a slight variation on the first. Pedro then pointed out his older patch, and so we arrive at this patch. The GDB changes here are mostly Pedro's work, but updated by me (Andrew), any mistakes are mine. The tests here are a combinations of everyone's work, and the commit message is new, but copies bits from everyone's earlier work. Problem Description =================== Bug PR gdb/21699 makes the observation that using $_as_string with GDB's printf can cause GDB to print unexpected data from the inferior. The reproducer is pretty simple: #include static char arena[100]; /* Override malloc() so value_coerce_to_target() gets a known pointer, and we know we"ll see an error if $_as_string() gives a string that isn't null terminated. */ void *malloc (size_t size) { memset (arena, 'x', sizeof (arena)); if (size > sizeof (arena)) return NULL; return arena; } int main () { return 0; } And then in a GDB session: $ gdb -q test Reading symbols from /tmp/test... (gdb) start Temporary breakpoint 1 at 0x4004c8: file test.c, line 17. Starting program: /tmp/test Temporary breakpoint 1, main () at test.c:17 17 return 0; (gdb) printf "%s\n", $_as_string("hello") "hello"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx (gdb) quit The problem above is caused by how value_cstring is used within py-value.c, but once we understand the issue then it turns out that value_cstring is used in an unexpected way in many places within GDB. Within py-value.c we have a null-terminated C-style string. We then pass a pointer to this string, along with the length of this string (so not including the null-character) to value_cstring. In value_cstring GDB allocates an array value of the given character type, and copies in requested number of characters. However value_cstring does not add a null-character of its own. This means that the value created by calling value_cstring is only null-terminated if the null-character is included in the passed in length. In py-value.c this is not the case, and indeed, in most uses of value_cstring, this is not the case. When GDB tries to print one of these strings the value contents are pushed to the inferior, and then read back as a C-style string, that is, GDB reads inferior memory until it finds a null-terminator. For the py-value.c case, no null-terminator is pushed into the inferior, so GDB will continue reading inferior memory until a null-terminator is found, with unpredictable results. Patch Description ================= The first thing this patch does is better define what the arguments for the two function value_cstring and value_string should represent. The comments in the header file are updated to describe whether the length argument should, or should not, include a null-character. Also, the data argument is changed to type gdb_byte. The functions as they currently exist will handle wide-characters, in which case more than one 'char' would be needed for each character. As such using gdb_byte seems to make more sense. To avoid adding casts throughout GDB, I've also added an overload that still takes a 'char *', but asserts that the character type being used is of size '1'. The value_cstring function is now responsible for adding a null character at the end of the string value it creates. However, once we start looking at how value_cstring is used, we realise there's another, related, problem. Not every language's strings are null terminated. Fortran and Ada strings, for example, are just an array of characters, GDB already has the function value_string which can be used to create such values. Consider this example using current GDB: (gdb) set language ada (gdb) p $_gdb_setting("arch") $1 = (97, 117, 116, 111) (gdb) ptype $ type = array (1 .. 4) of char (gdb) p $_gdb_maint_setting("test-settings string") $2 = (0) (gdb) ptype $ type = array (1 .. 1) of char This shows two problems, first, the $_gdb_setting and $_gdb_maint_setting functions are calling value_cstring using the builtin_char character, rather than a language appropriate type. In the first call, the 'arch' case, the value_cstring call doesn't include the null character, so the returned array only contains the expected characters. But, in the $_gdb_maint_setting example we do end up including the null-character, even though this is not expected for Ada strings. This commit adds a new language method language_defn::value_string, this function takes a pointer and length and creates a language appropriate value that represents the string. For C, C++, etc this will be a null-terminated string (by calling value_cstring), and for Fortran and Ada this can be a bounded array of characters with no null terminator. Additionally, this new language_defn::value_string function is responsible for selecting a language appropriate character type. After this commit the only calls to value_cstring are from the C expression evaluator and from the default language_defn::value_string. And the only calls to value_string are from Fortan, Ada, and ObjectC related code. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=21699 Co-Authored-By: Simon Marchi Co-Authored-By: Andrew Burgess Co-Authored-By: Pedro Alves Approved-By: Simon Marchi 2023-06-05 Tom de Vries [gdb] Fix grammar in comments and docs Fix grammar in some comments and docs: - machines that doesn't -> machines that don't - its a -> it's a - its the -> it's the - if does its not -> if it does it's not - one more instructions if doesn't match -> one more instruction if it doesn't match - it's own -> its own - it's first -> its first - it's pointer -> its pointer I also came across "it's performance" in gdb/stubs/*-stub.c in the HP public domain notice, I've left that alone. Tested on x86_64-linux. 2023-06-05 Tom de Vries [gdb] Fix more typos Fix some more typos: - distinquish -> distinguish - actualy -> actually - singe -> single - frash -> frame - chid -> child - dissassembler -> disassembler - uninitalized -> uninitialized - precontidion -> precondition - regsiters -> registers - marge -> merge - sate -> state - garanteed -> guaranteed - explictly -> explicitly - prefices (nonstandard plural) -> prefixes - bondary -> boundary - formated -> formatted - ithe -> the - arrav -> array - coresponding -> corresponding - owend -> owned - fials -> fails - diasm -> disasm - ture -> true - tpye -> type There's one code change, the name of macro SIG_CODE_BONDARY_FAULT changed to SIG_CODE_BOUNDARY_FAULT. Tested on x86_64-linux. 2023-06-05 Alan Modra bfd_error_on_input messages bfd_errmsg uses asprintf for bfd_error_on_input, which means we currently leak memory. Keep a static pointer to the message and free it in various places to minimise the leaks. bfd_set_input_error (NULL, bfd_error_no_error) is a way to free up the last string if that matters. * bfd.c (input_error_msg): New static var. (bfd_set_input_error): Free it here.. (bfd_init): ..and here.. (bfd_errmsg): ..and here. Use it for asprintf output. 2023-06-05 Alan Modra Yet another ecoff fuzzed object fix * ecoff.c (_bfd_ecoff_slurp_symbol_table): Sanity check fdr_ptr csym against remaining space for symbols. Error on out of bounds fdr_ptr fields. 2023-06-05 YunQiang Su MIPS: sync oprand char usage between mips and micromips We should try our best to make mips32 using the same oprand char with micromips. So for mips32, we use: ^ is added for 5bit sa oprand for some new DSPr2 instructions: APPEND, PREPEND, PRECR_SRA[_R].PH.W the LSB bit is 11, like RD. +t is removed for coprocessor 0 destination register. 'E' does the samething. +t is now used for RX oprand for MFTR/MTTR (MT ASE) ? is added for sel oprand for MFTR/MTTR (MT ASE) For mips32, the position of sel in MFTR/MTTR is same with mfc0 etc, while for micromips, they are different. We also add an extesion format of cftc2/cttc2/mftc2/mfthc2/mttc2/mtthc2: concatenating rs with rx as the index of control or data. 2023-06-05 YunQiang Su MIPS: add MT ASE support for micromips32 These instructions are descripted in MD00768. MIPS® Architecture for Programmers Volume IV-f: The MIPS® MT Module for the microMIPS32™ Architecture Document Number: MD00768 Revision 1.12 July 16, 2013 https://s3-eu-west-1.amazonaws.com/downloads-mips/documents/MD00768-1C-microMIPS32MT-AFP-01.12.pdf 2023-06-05 YunQiang Su Revert "MIPS: add MT ASE support for micromips32" This reverts commit 783a5f46b0583e9ed3a63acd3361009f46de5c17. 2023-06-05 YunQiang Su MIPS: add MT ASE support for micromips32 These instructions are descripted in MD00768. MIPS® Architecture for Programmers Volume IV-f: The MIPS® MT Module for the microMIPS32™ Architecture Document Number: MD00768 Revision 1.12 July 16, 2013 https://s3-eu-west-1.amazonaws.com/downloads-mips/documents/MD00768-1C-microMIPS32MT-AFP-01.12.pdf 2023-06-05 YunQiang Su MIPS: fix some ld testcases with compiler 1. config/default.exp: use -mabi=32 not for -gnuabi64 xfail_from_runlist: remove an element and mark it xfail. 2. ld-elf/indirect.exp: xfail indirect5a indirect5b indirect6a indirect6b indirect5c indirect5d indirect6c indirect6d 3. ld-elf/pr23658-2: mips output is not common 4. ld-elf/shared.exp: non-run on mips: Build libpr16496b.so 5. ld-elfvers/vers.exp: xfail vers4, vers4b no-run on mips: vers24a, vers24b, vers24c 6. ld-gc/gc.exp: add -KPIC into asflags for pr13683, pr14265, pr19161 7. ld-mips-elf/mips-elf.exp: use noarch for mips16-local-stubs-1, since it use -mips4 8. ld-plugin/lto.exp: no-run on mips/linux: PR ld/12982 add -KPIC into asflags for lto-3r, lto-5r, PR ld/19317 (2) xfail PR ld/15323 (4), PR ld/19317 (3) 9. ld-plugin/plugin.exp: xfail plugin claimfile lost symbol plugin claimfile replace symbol plugin claimfile replace symbol plugin claimfile lost symbol with source plugin claimfile replace symbol with source plugin claimfile resolve symbol with source plugin 2 with source lib load plugin 2 with source plugin 3 with source lib load plugin 3 with source 11. ld-selective/selective.exp: add -fno-PIC, which is needed for -mno-abicalls 12. ld-shared/shared.exp: xfail shared (non PIC), shared (PIC main, non PIC so) MIPS: fix -gnuabi64 testsuite Test on: mips64-linux-gnuabi64 mips64el-linux-gnuabi64 mipsisa64-linux-gnuabi64 mipsisa64el-linux-gnuabi64 mipsisa64r2-linux-gnuabi64 mipsisa64r2el-linux-gnuabi64 mipsisa64r6-linux-gnuabi64 mipsisa64r6el-linux-gnuabi64 2023-06-05 YunQiang Su MIPS: fix r6 testsuites Introduce run_dump_test_o32l run_dump_test_n32l run_dump_test_n64l Which use `-march=from-abi` for pre-R6 testcases, like micromips/mips16e etc. For cases doesn't use run_dump_test_*, we use -mips32r2 for micromips32 -mips1 for mips16-32 -march=from-abi for testcases to o32/n32/n64 both/all. Replace `addi` with `addiu` for some cases for both r6 and pre-R6. Introduce some new testcases for r6 with FPXX/FP64. Introduce new testcase: comdat-reloc-r6. Skip `default` in mips_arch_list_matching if triple is mipsisa*, due to: 1)it will cannot match mipsr6@*.d: since mips32rN/mips64rN will always be used, it won't be a problem. 2)some test think -march=mips64rN will alway true for mipsisa64rN, which is not true now. This patch fix testsuite for all r6-default gnu triples: mipsisa32r6-linux-gnu mipsisa32r6el-linux-gnu mips-img-linux-gnu mipsel-img-linux-gnu mipsisa64r6-linux-gnu mipsisa64r6el-linux-gnu 2023-06-05 YunQiang Su MIPS: default r6 if vendor is img This behavior is used by downstream toolchain since 2014. We also set the default ABI for mips*-img-elf to O32. The previous value is NO_ABI, which is not good default ABI. We don't support mips64*-img* due to GCC doesn't support it, and We believe that the multilib should be used for this case. 2023-06-05 YunQiang Su MIPS: gas: alter 64 or 32 for mipsisa triples if march is implicit When configure with triples mipsisa[32,64]rN[el,], the march value is pinned to a fix value if not given explicitly. for example 1) mipsisa32r6-linux-gnu -n32 xx.s will complains that: -march=mips32r6 is not compatible with the selected ABI 2) mipsisa64r2el-linux-gnu -o32 generates objects with 64bit CPU: ELF 32-bit LSB relocatable, MIPS, MIPS64 rel2 version 1 (SYSV) They are not good default behaviors: Let's alter the CPU info Since we are using these triples as a regular linux distributions, let's alter march according to ABI. 2023-06-05 GDB Administrator Automatic date update in version.in 2023-06-04 GDB Administrator Automatic date update in version.in 2023-06-03 Tom de Vries [gdb] Fix typos Fix a few typos: - implemention -> implementation - convertion(s) -> conversion(s) - backlashes -> backslashes - signoring -> ignoring - (un)ambigious -> (un)ambiguous - occured -> occurred - hidding -> hiding - temporarilly -> temporarily - immediatelly -> immediately - sillyness -> silliness - similiar -> similar - porkuser -> pokeuser - thats -> that - alway -> always - supercede -> supersede - accomodate -> accommodate - aquire -> acquire - priveleged -> privileged - priviliged -> privileged - priviledges -> privileges - privilige -> privilege - recieve -> receive - (p)refered -> (p)referred - succesfully -> successfully - successfuly -> successfully - responsability -> responsibility - wether -> whether - wich -> which - disasbleable -> disableable - descriminant -> discriminant - construcstor -> constructor - underlaying -> underlying - underyling -> underlying - structureal -> structural - appearences -> appearances - terciarily -> tertiarily - resgisters -> registers - reacheable -> reachable - likelyhood -> likelihood - intepreter -> interpreter - disassemly -> disassembly - covnersion -> conversion - conviently -> conveniently - atttribute -> attribute - struction -> struct - resonable -> reasonable - popupated -> populated - namespaxe -> namespace - intialize -> initialize - identifer(s) -> identifier(s) - expection -> exception - exectuted -> executed - dungerous -> dangerous - dissapear -> disappear - completly -> completely - (inter)changable -> (inter)changeable - beakpoint -> breakpoint - automativ -> automatic - alocating -> allocating - agressive -> aggressive - writting -> writing - reguires -> requires - registed -> registered - recuding -> reducing - opeartor -> operator - ommitted -> omitted - modifing -> modifying - intances -> instances - imbedded -> embedded - gdbaarch -> gdbarch - exection -> execution - direcive -> directive - demanged -> demangled - decidely -> decidedly - argments -> arguments - agrument -> argument - amespace -> namespace - targtet -> target - supress(ed) -> suppress(ed) - startum -> stratum - squence -> sequence - prompty -> prompt - overlow -> overflow - memember -> member - languge -> language - geneate -> generate - funcion -> function - exising -> existing - dinking -> syncing - destroh -> destroy - clenaed -> cleaned - changep -> changedp (name of variable) - arround -> around - aproach -> approach - whould -> would - symobl -> symbol - recuse -> recurse - outter -> outer - freeds -> frees - contex -> context Tested on x86_64-linux. Reviewed-By: Tom Tromey 2023-06-03 Tom de Vries [gdb/tdep] Fix typo in debug message In microblaze_analyze_prologue in gdb/microblaze-tdep.c I came across: ... microblaze_debug ("got addi r1,r1,%d; contnuing\n", imm); ... Fix this by using "continuing". Reviewed-By: Tom Tromey 2023-06-03 Tom de Vries [gdb/python] Fix doc string of valpy_const_value In gdb/python/py-value.c, in the value_object_methods array I noticed: ... { "const_value", valpy_const_value, METH_NOARGS, "Return a 'const' qualied version of the same value." }, ... Fix the qualied -> qualified typo. Reviewed-By: Tom Tromey 2023-06-03 Tom de Vries [gdb/guile] Fix doc string for value-optimized-out? In gdb/guile/scm-value.c, I noticed in the value_functions array initializer: ... { "value-optimized-out?", 1, 0, 0, as_a_scm_t_subr (gdbscm_value_optimized_out_p), "\ Return #t if the value has been optimizd out." }, ... There's a typo in the doc string. Fix this by using "optimized". Reviewed-By: Tom Tromey 2023-06-03 Tom de Vries [gdb/tui] Fix help text of show tui tab-width I noticed: ... (gdb) help show tui tab-width Show the tab witdh, in characters, for the TUI. This variable controls how many spaces are used to display a tab character. ... a typo: "witdh". Fix this by using "width" instead. Reviewed-By: Tom Tromey 2023-06-03 Tom de Vries [gdb/cli] Fix help text of maint info target-sections I noticed a typo: ... (gdb) help maint info target-sections List GDB's internal section table. Print the current targets section list. This is a sub-set of all sections, from all objects currently loaded. Usually the ALLOC sectoins. ... Fix this by using "sections". Reviewed-By: Tom Tromey 2023-06-03 Tom de Vries [gdb/cli] Fix help text of maint set ignore-prologue-end-flag I noticed here: ... (gdb) help maint set ignore-prologue-end-flag Set if the PROLOGUE-END flag is ignored. The PROLOGUE-END flag from the line-table entries is used to place \ breakpoints past the prologue of functions. Disabeling its use use forces \ the use of prologue scanners. ... a typo in "Disabeling" and accidental word repetition "use use". Fix by replacing with "Disabling" and "use". Reviewed-By: Tom Tromey 2023-06-03 Tom de Vries [gdb/compile] Fix typo in debug message In compile_object_load in gdb/compile/compile-object-load.c I came across: ... "Connectiong ELF symbol \"%s\" to the .toc section (%s)\n", ... Fix this typo by using "Connecting" instead. Reviewed-By: Tom Tromey 2023-06-03 Tom de Vries [gdbserver] Fix typo in debug message I noticed in emit_ops_insns in gdbserver/linux-aarch64-low.cc: ... threads_debug_printf ("Adding %d instrucions at %s", ... Fix the typo by using "instructions" instead. Reviewed-By: Tom Tromey 2023-06-03 Tom de Vries [gdb/ada] Fix argument name misspelling Two functions use the argument name bounds_prefered_p. This misspells "preferred". Fix this by using bounds_preferred_p instead. Tested on x86_64-linux. Reviewed-By: Tom Tromey 2023-06-03 Alan Modra Re: loongarch readelf support Another segfault. * readelf.c (target_specific_reloc_handling): Sanity check loongarch reloc r_offset. 2023-06-03 Alan Modra Re: More ecoff sanity checks Yet another fuzzer fix. * ecoff.c (ecoff_slurp_symbolic_header ): Zero counts when associated pointer is zero. (_bfd_ecoff_slurp_symbolic_info): Remove now unnecessary check. 2023-06-03 GDB Administrator Automatic date update in version.in 2023-06-02 Luis Machado [AArch64] Fix architecture debug version constant thinkos Caught this during emulator testing. Fix the constants. They should be 0xa and 0xb as opposed to 0x10 and 0x11. There was a thinko while defining them. Obvious enough. Tested on aarch64-linux Ubuntu 20.04/22.04. 2023-06-02 Alan Modra Re: bfd_close and target free_cached_memory _bfd_delete_bfd can be called early, before the target xvec is set up. * opncls.c (_bfd_delete_bfd): Don't segfault on NULL xvec. 2023-06-02 Alan Modra Re: More ecoff sanity checks Another fix for fuzzed object files, exhibiting as a segfault in nm.c filter_symbols when accessing a symbol name. * ecoff.c (_bfd_ecoff_slurp_symbol_table): Sanity check fdr_ptr->issBase, and tighten sym.iss check. 2023-06-02 Alan Modra loongarch readelf support This fixes two buffer overflows found by fuzzers. * readelf.c (target_specific_reloc_handling): Sanity check loongarch reloc symbol index. Don't apply reloc after errors. Reduce translation work of "invalid symbol index" error message. 2023-06-02 Alan Modra Minor objcopy optimisation for copy_relocations_in_section * objcopy (copy_relocations_in_section): Don't read the relocs for STRIP_ALL if keep_specific_htab is empty. 2023-06-02 GDB Administrator Automatic date update in version.in 2023-06-01 Indu Bhagat libsframe: avoid using magic number Define a new constant for the maximum number of stack offsets handled in libsframe, and use it. Note that the SFrame format does not define such a constant (limit). This is an implmentation-defined constant in libsframe. include/ * sframe-api.h (MAX_NUM_STACK_OFFSETS): New definition. libsframe/ * sframe.c (sframe_fre_sanity_check_p): Use it. 2023-06-01 Indu Bhagat libsframe: minor fixups in flip_fre related functions libsframe/ * sframe.c (flip_fre_start_address): Remove unnecessary type cast. Use uint16_t instead of unsigned short. (flip_fre_stack_offsets): Likewise. 2023-06-01 Jim Wilson RISC-V: PR30449, Add lga assembler macro support. Originally discussion, https://github.com/riscv/riscv-isa-manual/pull/539 Added new load address pseudo instruction which is always expanded to GOT access, no matter the .option rvc is set or not. gas/ PR 30449 * config/tc-riscv.c (macro): Add M_LGA support. * testsuite/gas/riscv/la-variants.d: New. * testsuite/gas/riscv/la-variants.s: New. include/ PR 30449 * opcode/riscv.h (M_LGA): New. opcodes/ PR 30449 * riscv-opc.c (riscv_opcodes): Add lga support. 2023-06-01 Nelson Chu [PR ld/22263][PR ld/24676] RISC-V: Avoid spurious R_RISCV_NONE for TLS GD/IE. For TLS GD/IE, add the same condition with the relocate_section in the allocate_dynrelocs, to make sure we won't reserve redundant spaces for dynamic relocations since the conservative estimatation. After applying this patch, ld seems no longer generate the spurious R_RISCV_NONE for pr22263-1 test, and the test in pr24676. bfd/ PR ld/22263 PR ld/24676 * elfnn-riscv.c (RISCV_TLS_GD_IE_NEED_DYN_RELOC): New defined. Set NEED_RELOC to true if TLS GD/IE needs dynamic relocations, and INDX will be the dynamic index. (allocate_dynrelocs): Don't reserve extra spaces in the rela.got if RISCV_TLS_GD_IE_NEED_DYN_RELOC set need_reloc to false. This condition needs to be same as relocate_section. (relocate_section): Likewise, use the same condition as allocate_dynrelocs. 2023-06-01 Alan Modra Harden PowerPC64 OPD handling against fuzzers PowerPC64 ELFv1 object files should have at most one .opd section, and OPD handling in elf64-ppc.c makes use of this fact by caching some .opd section info in the per-object bfd.tdata. This was done to avoid another word in the target specific section data. Of course, fuzzers don't respect the ABI, and even non-malicious users can accidentally create multiple .opd sections. So it is better to avoid possible buffer overflows and other confusion when OPD handling for a second .opd section references data for the first .opd section, by keeping the data per-section. The patch also fixes a memory leak, and a corner case where I think we could hit an assertion in opd_entry_value or read out of bounds in ppc64_elf_branch_reloc doing a final link producing non-ppc64 output. (It's a really rare corner case because not only would you need to be linking ppc64 objects to non-ppc64 output, you'd also need a branch reloc symbol to be defined in a .opd section of a non-ppc64 input.) * elf64-ppc.c (is_ppc64_elf): Move earlier in file. (ppc64_elf_branch_reloc): Check symbol bfd before accessing ppc64 elf specific data structures. (struct ppc64_elf_obj_tdata): Move opd union.. (struct _ppc64_elf_section_data): ..to here. (ppc64_elf_before_check_relocs): Allow for opd sec_type already set to sec_opd. (ppc64_elf_check_relocs): Only set sec_type to sec_toc when unset. Error for unexpected toc relocs. (opd_entry_value): Return -1 when non-ppc64 rather than asserting. Check and set sec_type too. Adjust for changed location of contents and relocs. (ppc64_elf_relocate_section): Adjust for changed location of cached .opd relocs. (ppc64_elf_free_cached_info): New function. (bfd_elf64_bfd_free_cached_info): Define. 2023-06-01 Alan Modra bfd_close and target free_cached_memory bfd_free_cached_info is used in just one place in archive.c, which means most times we reach bfd_close the function isn't called. On the other hand, if bfd_free_cached_info is called we can't do much on the bfd since it loses all its obj_alloc memory. This restricts what can be done in a target _close_and_cleanup. In particular you can't look at sections, which leads to duplication of code in target close_and_cleanup and free_cached_info, eg. elfnn-aarch64.c. * opncls.c (_bfd_delete_bfd): Call bfd_free_cached_info. * elfnn-aarch64.c (elfNN_aarch64_close_and_cleanup): Delete. (bfd_elfNN_close_and_cleanup): Don't define. * som.c (som_bfd_free_cached_info): Don't call _bfd_generic_close_and_cleanup here. (som_close_and_cleanup): Define as _bfd_generic_close_and_cleanup. 2023-06-01 Alan Modra section_by_target_index memory leak The rs6000 backend can call coff_section_from_bfd_index from its object_p function via coff_set_alignment_hook. If the object doesn't match, or another target matches too, then the hash table needs to be freed via a cleanup. * coffgen.c (coff_object_cleanup): New function. (coff_real_object_p): Return coff_object_cleanup, and call on failure path. Move declaration to.. * libcoff-in.h: ..here. (coff_object_cleanup): Declare. * coff-stgo32.c (go32exe_cleanup): Call coff_object_cleanup. (go32exe_check_format): Adjust assertion. * libcoff.h: Regenerate. 2023-06-01 Alan Modra Remove BFD_FAIL in cpu-sh.c The assertions in cpu-sh.c can be triggered by passing bogus values in disassemble_info.mach. This doesn't cause any bfd misbehaviour. * cpu-sh.c (sh_get_arch_from_bfd_mach): Remove BFD_FAIL. (sh_get_arch_up_from_bfd_mach): Likewise. 2023-06-01 GDB Administrator Automatic date update in version.in 2023-05-31 Vladimir Mezentsev gprofng: Fix -Wsign-compare warning gprofng/ChangeLog 2023-05-25 Vladimir Mezentsev PR gprofng/30490 * src/LoadObject.cc: Fix -Wsign-compare warning. 2023-05-31 Vladimir Mezentsev gprofng: 29470 The test suite should be made more flexible I add two new targets (check-extra, check-install) for gprofng testing: `make check` runs sanity testing for gprofng and takes ~30 secunds. `make check-extra` runs all gprofng tests and takes ~20 minutus. `make check-install` runs all gprofng tests and uses gprofng installation. On aarch64, there are unwind problems in libgp-collector.so. I set ACCT_FILTER to temporarily ignore problematic functions. gprofng/ChangeLog 2023-05-25 Vladimir Mezentsev PR gprofng/29470 * Makefile.am: Add check-extra, check-install. * Makefile.in: Rebuild * testsuite/config/default.exp: Set the GPROFNG variable. * testsuite/gprofng.display/display.exp: Updated the test list. * testsuite/gprofng.display/jsynprog/Intface.java: Correct copyright. * testsuite/gprofng.display/jsynprog/Launcher.java: Likewise. * testsuite/gprofng.display/jsynprog/Makefile: Likewise. * testsuite/gprofng.display/jsynprog/Routine.java: Likewise. * testsuite/gprofng.display/jsynprog/Sub_Routine.java: Likewise. * testsuite/gprofng.display/jsynprog/cloop.cc: Likewise. * testsuite/gprofng.display/jsynprog/jsynprog.h: Likewise. * testsuite/gprofng.display/jsynprog/jsynprog.java: Correct copyright. Add the -j option to run the selected functions. * testsuite/gprofng.display/synprog/check_results.pl: Remove unused environment variable. * testsuite/gprofng.display/synprog/synprog.c: Updated DEFAULT_COMMAND. * testsuite/lib/Makefile.skel: Apply $(ACCT_FILTER). * testsuite/lib/acct.pm: Ignore errors when $(ACCT_FILTER) is set. * testsuite/lib/display-lib.exp: Add TARGET_FLAGS in make_args. 2023-05-31 Tom Tromey Improve MI -dprintf-insert documentation I found the documentation for -dprintf-insert a bit unclear. It didn't mention the possibility of multiple arguments, and I also noticed that it implied that the format parameter is optional, which it is not. While looking into this I also noticed a few comments in the implementation that could also be improved. Then, I noticed a repeated call to strlen in a loop condition, so I fixed this up as well. Reviewed-By: Eli Zaretskii 2023-05-31 Tom Tromey Pass correct name to @value in gdb.texinfo I noticed a couple instance of this warning when rebuilding the gdb info files: warning: undefined flag: GDB The problem is that the wrong argument was passed to @value. This patch fixes the problem. 2023-05-31 Tom de Vries [gdb/testsuite] Fix gdb.tui/wrap-line.exp with --disable-tui When running the test-case gdb.tui/wrap-line.exp with a build configured with --disable-tui, we run into: ... (gdb) PASS: gdb.tui/wrap-line.exp: width-hard-coded: set width 50 tui new-layout command-layout cmd 1^M Undefined command: "tui". Try "help".^M (gdb) ERROR: Undefined command "tui new-layout command-layout cmd 1". ... Fix this by guarding the command with allow_tui_tests. Tested on x86_64-linux. 2023-05-31 Tom de Vries [gdb/testsuite] Fix gdb.tui/pr30056.exp for native-extended-gdbserver When running test-case gdb.tui/pr30056.exp with target board native-extended-gdbserver, I run into: ... Quit^[[K^M^[[B(gdb) PASS: gdb.tui/pr30056.exp: Control-C Remote debugging from host ::1, port 38810^M ^M(failed reverse-i-search)`xyz': ^M(gdb) target extended-remote \ localhost:2346^[[7GWARNING: Timed out waiting for EOF in server after \ monitor exit ... This is due to the fact that ^C doesn't abort the reverse-i-search. This appears to be due to a readline problem. A PR is open about this: PR cli/30498. Add a KFAIL for the PR, and ensure that the isearch is aborted by using ^G, such that we have a responsive prompt to handle the "monitor exit" command that native-extended-gdbserver issues. Tested on x86_64-linux. 2023-05-31 Tristan Gingold pe/coff - add support for base64 encoded long section names PR 30444 * coffcode.h (coff_write_object_contents): Handle base64 encoding on PE. Also check for too large string table. * coffgen.c (extract_long_section_name): New function extracted from ... (make_a_section_from_file): ... here. Add support for base64 long section names. (decode_base64): New function. 2023-05-31 Nick Clifton Fix printf formating issues in elfxx-loongarch64.c 2023-05-31 Felix Willgerodt python, btrace: Fix some small formatting issues. Reviewed-By: Tom Tromey 2023-05-31 Tom de Vries [gdb/tui] Fix fingerprint for cmd-only layout I added a cmd-only layout: ... (gdb) tui new-layout cmd cmd 1 ... and set it: ... (gdb) layout cmd ... which gave me the expect result: only the cmd window in the screen. However, after going back to layout src: ... (gdb) layout src ... I got a source window with only one line in it, and the cmd window taking most of the screen. I traced this back to tui_set_layout, where for both the old and the new layout the fingerprint of the cmd window in the layout is taken. If the fingerprint is the same, an effort will be done to preserve the command window size. The fingerprint is "VC" for both the old (cmd) and new (src) layouts, which explains the behaviour. I think this is essentially a bug in the finger print calculation, and it should be "C" for the cmd layout. Fix this by not adding a V or H in the fingerprint if the list size is one. Tested on x86_64-linux. Reviewed-By: Tom Tromey 2023-05-31 GDB Administrator Automatic date update in version.in 2023-05-30 Andrew Burgess gdb: add support for %V to printf command This commit adds a new format for the printf and dprintf commands: '%V'. This new format takes any GDB expression and formats it as a string, just as GDB would for a 'print' command, e.g.: (gdb) print a1 $a = {2, 4, 6, 8, 10, 12, 14, 16, 18, 20} (gdb) printf "%V\n", a1 {2, 4, 6, 8, 10, 12, 14, 16, 18, 20} (gdb) It is also possible to pass the same options to %V as you might pass to the print command, e.g.: (gdb) print -elements 3 -- a1 $4 = {2, 4, 6...} (gdb) printf "%V[-elements 3]\n", a1 {2, 4, 6...} (gdb) This new feature would effectively replace an existing feature of GDB, the $_as_string builtin convenience function. However, the $_as_string function has a few problems which this new feature solves: 1. $_as_string doesn't currently work when the inferior is not running, e.g: (gdb) printf "%s", $_as_string(a1) You can't do that without a process to debug. (gdb) The reason for this is that $_as_string returns a value object with string type. When we try to print this we call value_as_address, which ends up trying to push the string into the inferior's address space. Clearly we could solve this problem, the string data exists in GDB, so there's no reason why we have to push it into the inferior, but this is an existing problem that would need solving. 2. $_as_string suffers from the fact that C degrades arrays to pointers, e.g.: (gdb) printf "%s\n", $_as_string(a1) 0x404260 (gdb) The implementation of $_as_string is passed a gdb.Value object that is a pointer, it doesn't understand that it's actually an array. Solving this would be harder than issue #1 I think. The whole array to pointer transformation is part of our expression evaluation. And in most cases this is exactly what we want. It's not clear to me how we'd (easily) tell GDB that we didn't want this reduction in _some_ cases. But I'm sure this is solvable if we really wanted to. 3. $_as_string is a gdb.Function sub-class, and as such is passed gdb.Value objects. There's no super convenient way to pass formatting options to $_as_string. By this I mean that the new %V feature supports print formatting options. Ideally, we might want to add this feature to $_as_string, we might imagine it working something like: (gdb) printf "%s\n", $_as_string(a1, elements = 3, array_indexes = True) where the first item is the value to print, while the remaining options are the print formatting options. However, this relies on Python calling syntax, which isn't something that convenience functions handle. We could possibly rely on strictly positional arguments, like: (gdb) printf "%s\n", $_as_string(a1, 3, 1) But that's clearly terrible as there's far more print formatting options, and if you needed to set the 9th option you'd need to fill in all the previous options. And right now, the only way to pass these options to a gdb.Function is to have GDB first convert them all into gdb.Value objects, which is really overkill for what we want. The new %V format solves all these problems: the string is computed and printed entirely on the GDB side, we are able to print arrays as actual arrays rather than pointers, and we can pass named format arguments. Finally, the $_as_string is sold in the manual as allowing users to print the string representation of flag enums, so given: enum flags { FLAG_A = (1 << 0), FLAG_B = (1 << 1), FLAG_C = (1 << 1) }; enum flags ff = FLAG_B; We can: (gdb) printf "%s\n", $_as_string(ff) FLAG_B This works just fine with %V too: (gdb) printf "%V\n", ff FLAG_B So all functionality of $_as_string is replaced by %V. I'm not proposing to remove $_as_string, there might be users currently depending on it, but I am proposing that we don't push $_as_string in the documentation. As %V is a feature of printf, GDB's dprintf breakpoints naturally gain access to this feature too. dprintf breakpoints can be operated in three different styles 'gdb' (use GDB's printf), 'call' (call a function in the inferior), or 'agent' (perform the dprintf on the remote). The use of '%V' will work just fine when dprintf-style is 'gdb'. When dprintf-style is 'call' the format string and arguments are passed to an inferior function (printf by default). In this case GDB doesn't prevent use of '%V', but the documentation makes it clear that support for '%V' will depend on the inferior function being called. I chose this approach because the current implementation doesn't place any restrictions on the format string when operating in 'call' style. That is, the user might already be calling a function that supports custom print format specifiers (maybe including '%V') so, I claim, it would be wrong to block use of '%V' in this case. The documentation does make it clear that users shouldn't expect this to "just work" though. When dprintf-style is 'agent' then GDB does no support the use of '%V' (right now). This is handled at the point when GDB tries to process the format string and send the dprintf command to the remote, here's an example: Reading symbols from /tmp/hello.x... (gdb) dprintf call_me, "%V", a1 Dprintf 1 at 0x401152: file /tmp/hello.c, line 8. (gdb) set sysroot / (gdb) target remote | gdbserver --once - /tmp/hello.x Remote debugging using | gdbserver --once - /tmp/hello.x stdin/stdout redirected Process /tmp/hello.x created; pid = 3088822 Remote debugging using stdio Reading symbols from /lib64/ld-linux-x86-64.so.2... (No debugging symbols found in /lib64/ld-linux-x86-64.so.2) 0x00007ffff7fd3110 in _start () from /lib64/ld-linux-x86-64.so.2 (gdb) set dprintf-style agent (gdb) c Continuing. Unrecognized format specifier 'V' in printf Command aborted. (gdb) This is exactly how GDB would handle any other invalid format specifier, for example: Reading symbols from /tmp/hello.x... (gdb) dprintf call_me, "%Q", a1 Dprintf 1 at 0x401152: file /tmp/hello.c, line 8. (gdb) set sysroot / (gdb) target remote | gdbserver --once - /tmp/hello.x Remote debugging using | gdbserver --once - /tmp/hello.x stdin/stdout redirected Process /tmp/hello.x created; pid = 3089193 Remote debugging using stdio Reading symbols from /lib64/ld-linux-x86-64.so.2... (No debugging symbols found in /lib64/ld-linux-x86-64.so.2) 0x00007ffff7fd3110 in _start () from /lib64/ld-linux-x86-64.so.2 (gdb) set dprintf-style agent (gdb) c Continuing. Unrecognized format specifier 'Q' in printf Command aborted. (gdb) The error message isn't the greatest, but improving that can be put off for another day I hope. Reviewed-By: Eli Zaretskii Acked-By: Simon Marchi 2023-05-30 Simon Marchi gdb: add interp::on_memory_changed method Same idea as previous patches, but for memory_changed. Change-Id: Ic19f20c24d8a6431d4a89c5625e8ef4898f76e82 2023-05-30 Simon Marchi gdb: add interp::on_param_changed method Same idea as previous patches, but for command_param_changed. Change-Id: I7c2196343423360da05f016f8ffa871c064092bb 2023-05-30 Simon Marchi gdb: add interp::on_breakpoint_modified method Same idea as previous patches, but for breakpoint_modified. Change-Id: I4f0a9edea912de431e32451d74224b2022a7c328 2023-05-30 Simon Marchi gdb: add interp::on_breakpoint_deleted method Same idea as previous patches, but for breakpoint_deleted. Change-Id: I59c231ce963491bb1eee1432ee1090138f09e19c 2023-05-30 Simon Marchi gdb: add interp::on_breakpoint_created method Same idea as previous patches, but for breakpoint_created. Change-Id: I614113c924edc243590018b8fb3bf69cb62215ef 2023-05-30 Simon Marchi gdb: add interp::on_tsv_modified method Same idea as previous patches, but for tsv_modified. Change-Id: I55454a2386d5450040b3a353909b26f389a43682 2023-05-30 Simon Marchi gdb: add interp::on_tsv_deleted method Same idea as previous patches, but for tsv_deleted. Change-Id: I71b0502b493da7b6e293bee02aeca98de83d4b75 2023-05-30 Simon Marchi gdb: add interp::on_tsv_created method Same idea as previous patches, but for tsv_created. Change-Id: I9c30ecfdbd78ca015d613f43a0c0aef6c7eb32b5 2023-05-30 Simon Marchi gdb: add interp::on_traceframe_changed method Same idea as previous patches, but for traceframe_changed. Change-Id: Ia473f07d70d57b30aca0094d0e0585d7e0d95637 2023-05-30 Simon Marchi gdb: add interp::on_about_to_proceed method Same idea as previous patches, but for about_to_proceed. We only need (and want, as far as the mi_interp implementation is concerned) to notify the interpreter that caused the proceed. Change-Id: Id259bca10dbc3d43d46607ff7b95243a9cbe2f89 2023-05-30 Simon Marchi gdb: add interp::on_solib_unloaded method Same idea as previous patches, but for solib_unloaded. Change-Id: Iad847de93f0b38b5c90679a173d3beeaed7af6c5 2023-05-30 Simon Marchi gdb: add interp::on_solib_loaded method Same idea as previous patches, but for solib_loaded Change-Id: I85edb0a4b377f4b2c39ffccf31cb75f38bae0f55 2023-05-30 Simon Marchi gdb: add interp::on_target_resumed method Same idea as previous patches, but for target_resumed. Change-Id: I66fa28d1d41a1f3c4fb0d6a470137d493eac3c8c 2023-05-30 Simon Marchi gdb: add interp::on_record_changed method Same idea as previous patches, but for record_changed Change-Id: I5eeeacd703af8401c315060514c94e8e6439cc40 2023-05-30 Simon Marchi gdb: add interp::on_inferior_removed method Same idea as previous patches, but for inferior_removed. Change-Id: I7971840bbbdcfabf77e2ded7584830c9dfdd10d0 2023-05-30 Simon Marchi gdb: add interp::on_inferior_disappeared method Same idea as previous patches, but for inferior_disappeared. For symmetry with on_inferior_appeared, I named this one on_inferior_disappeared, despite the observer being called inferior_exit. This is called when detaching an inferior, so I think that calling it "disappeared" is a bit less misleading (the observer should probably be renamed later). Change-Id: I372101586bc9454997953c1e540a2a6685f53ef6 2023-05-30 Simon Marchi gdb: add interp::on_inferior_appeared method Same idea as previous patches, but for inferior_appeared. Change-Id: Ibe4feba34274549a886b1dfb5b3f8d59ae79e1b5 2023-05-30 Simon Marchi gdb: add interp::on_inferior_added method Same idea as previous patches, but for inferior_added. mi_interp::init avoided using mi_inferior_added, since, as the comment used to say, it would notify all MI interpreters. Now, it's easy to only notify the new interpreter, so it's possible to just call the on_inferior_added method in mi_interp::init. Change-Id: I0eddbd5367217d1c982516982089913019ef309f 2023-05-30 Simon Marchi gdb: add interp::on_thread_exited method Same idea as previous patches, but for thread_exited. Change-Id: I4be974cbe58cf635453fef503c2d77c82522cbd9 2023-05-30 Simon Marchi gdb: add interp::on_new_thread method Same idea as previous patches, but for new_thread. Change-Id: Ib70ae3421b736fd69d86c4e7c708bec349aa256c 2023-05-30 Simon Marchi gdb: add interp::on_user_selected_context_changed method Same as previous patches, but for user_selected_context_changed. Change-Id: I40de15be897671227d4bcf3e747f0fd595f0d5be 2023-05-30 Simon Marchi gdb: add interp::on_command_error method Same idea as the previous patches, but for command_error. Change-Id: If6098225dd72fad8be13b3023b35bc8bc48efb9d 2023-05-30 Simon Marchi gdb: add interp::on_sync_execution_done method Same as previous patches, but for sync_execution_done. Except that here, we only want to notify the interpreter that is executing the command, not all interpreters. Change-Id: I729c719447b5c5f29af65dbf6fed9132e2cd308b 2023-05-30 Simon Marchi gdb: add interp::on_no_history method Same as previous patches, but for no_history. Change-Id: I06930fe7cb4082138c6c5496c5118fe4951c10da 2023-05-30 Simon Marchi gdb: add interp::on_exited method Same as previous patch, but for exited. Remove the exited observable, since nothing uses it anymore, and we don't have anything coming that will use it. Change-Id: I358cbea0159af56752dfee7510d6a86191e722bb 2023-05-30 Simon Marchi gdb: add interp::on_signal_exited method Same as previous patch, but for signal_exited. Remove the signal_exited observable, since nothing uses it anymore, and we don't have anything coming that will use it. Change-Id: I0dca1eab76338bf27be755786e3dad3241698b10 2023-05-30 Simon Marchi gdb: add interp::on_normal_stop method Same idea as the previous patch, but for the normal_stop event. Change-Id: I4fc8ca8a51c63829dea390a2b6ce30b77f9fb863 2023-05-30 Simon Marchi gdb: add interp::on_signal_received method Instead of having the interpreter code registering observers for the signal_received observable, add a "signal_received" virtual method to struct interp. Add a interps_notify_signal_received function that loops over all UIs and calls the signal_received method on the interpreter. Finally, add a notify_signal_received function that calls interps_notify_signal_received and then notifies the observers. Replace all existing notifications to the signal_received observers with calls to notify_signal_received. Before this patch, the CLI and MI code both register a signal_received observer. These observer go over all UIs, and, for those that have a interpreter of the right kind, print the stop notifiation. After this patch, we have just one "loop over all UIs", inside interps_notify_signal_received. Since the interp::on_signal_received method gets called once for each interpreter, the implementations only need to deal with the current interpreter (the "this" pointer). The motivation for this patch comes from a future patch, that makes the amdgpu code register an observer to print a warning after the CLI's signal stop message. Since the amdgpu and the CLI code both use observers, the order of the two messages is not stable, unless we define the priority using the observer dependency system. However, the approach of using virtual methods on the interpreters seems like a good change anyway, I think it's more straightforward and simple to understand than the current solution that uses observers. We are sure that the amdgpu message gets printed after the CLI message, since observers are notified after interpreters. Keep the signal_received, even if nothing uses if, because we will be using it in the upcoming amdgpu patch implementing the warning described above. Change-Id: I4d8614bb8f6e0717f4bfc2a59abded3702f23ac4 2023-05-30 Tom de Vries [gdb] Mention --with/without-system-readline for --configuration Simon reported that the new test-case gdb.tui/pr30056.exp fails with system readline. This is because the test-case requires a fix in readline that's present in our in-repo copy of readline, but most likely not in any system readline yet. Fix this by: - mentioning --with-system-readline or --without-system-readline in the configuration string. - adding a new proc with_system_readline that makes this information available in the testsuite. - using this in test-case gdb.tui/pr30056.exp to declare it unsupported for --with-system-readline. Tested on x86_64-linux. Reported-By: Simon Marchi Approved-By: Simon Marchi 2023-05-30 Nick Clifton Slight wording improvement for the -Ur documentation Improve header information displayed with objdump -P for PE binaries. * od-pe.c (targ_info): New array. (get_target_specific_info): New function. (decode_machine_number): Retire. Use get_target_specific_info instead. (is_pe_object_magic): Likewise. (dump_pe_file_header): Display more information. Rework layout to be similar to that from 'objdump -p'. Add code to handle larger than normnal AOUT headers. 2023-05-30 mengqinggang LoongArch: ld: Add support for linker relaxation. Add ld relax support and testsuits. ld/ChangeLog: * emultempl/loongarchelf.em: Regenerated. * testsuite/ld-elf/compressed1d.d: Xfail loongarch*-*. * testsuite/ld-elf/pr26936.d: Likewise. * testsuite/ld-loongarch-elf/disas-jirl.d: Regenerated. * testsuite/ld-loongarch-elf/disas-jirl-32.d: Regenerated. * testsuite/ld-loongarch-elf/jmp_op.d: Likewise. * testsuite/ld-loongarch-elf/macro_op.d: Likewise. * testsuite/ld-loongarch-elf/macro_op_32.d: Likewise. * testsuite/ld-loongarch-elf/relax-align.dd: New test. * testsuite/ld-loongarch-elf/relax-align.s: New test. * testsuite/ld-loongarch-elf/relax.exp: New test. * testsuite/ld-loongarch-elf/relax.s: New test. * testsuite/ld-loongarch-elf/uleb128.dd: New test. * testsuite/ld-loongarch-elf/uleb128.s: New test. 2023-05-30 mengqinggang LoongArch: gas: Add support for linker relaxation. Add gas -mrelax and -mno-relax option. Add R_LARCH_RELAX reloc for instrction if it can be relaxed. ADD R_LARCH_ALIGN reloc for align pseudo instruction because relax. Add ADD/SUB reloc pair for debug and exception data to calculate symbol substraction because relax. gas/ChangeLog: * config/tc-loongarch.c: (struct loongarch_cl_insn): New macro_id member. (enum options): New OPTION_RELAX and OPTION_NO_RELAX. (struct option): New mrelax and mno-relax. (md_parse_option): Likewise. (get_internal_label): (loongarch_args_parser_can_match_arg_helper): Generate relax reloc. (move_insn): Set fx_frag and fx_where if exist. (append_fixp_and_insn): Call frag_wane and frag_new for linker relax relocs. (loongarch_assemble_INSNs): New loongarch_cl_insn pointer parameter. (md_assemble): Fix function call. (fix_reloc_insn): Likewise. (md_apply_fix): Generate ADD/SUB reloc pair for debug and exception data. (loongarch_fix_adjustable): Delete. (md_convert_frag): Generate new fix. (loongarch_pre_output_hook): New function. (loongarch_make_nops): Likewise. (loongarch_frag_align_code): Likewise. (loongarch_insert_uleb128_fixes): Likewise. (loongarch_md_finish): Likewise. * config/tc-loongarch.h (md_allow_local_subtract): New macro define. (loongarch_frag_align_code): New declare. (md_do_align): Likewise. (loongarch_fix_adjustable): Delete. (tc_fix_adjustable): New macro define. (TC_FORCE_RELOCATION_SUB_SAME): Likewise. (TC_LINKRELAX_FIXUP): Likewise. (TC_FORCE_RELOCATION_LOCAL): Likewise. (DWARF2_USE_FIXED_ADVANCE_PC): Likewise. (MD_APPLY_SYM_VALUE): Likewise. (tc_symbol_new_hook): New extern. (NOP_OPCODE): Delete. (loongarch_pre_output_hook): New macro define. (md_pre_output_hook): Likewise. (md_finish): Likewise. (loongarch_md_finish): New extern. * testsuite/gas/all/align.d: Mark as unsupported on LoongArch. * testsuite/gas/all/gas.exp: Xfail loongarch*-*. * testsuite/gas/all/relax.d: Likewise. * testsuite/gas/elf/dwarf-5-irp.d: Likewise. * testsuite/gas/elf/dwarf-5-loc0.d: Likewise. * testsuite/gas/elf/dwarf-5-macro-include.d: Likewise. * testsuite/gas/elf/dwarf-5-macro.d: Likewise. * testsuite/gas/elf/dwarf2-11.d: Likewise. * testsuite/gas/elf/dwarf2-15.d: Likewise. * testsuite/gas/elf/dwarf2-16.d: Likewise. * testsuite/gas/elf/dwarf2-17.d: Likewise. * testsuite/gas/elf/dwarf2-18.d: Likewise. * testsuite/gas/elf/dwarf2-19.d: Likewise. * testsuite/gas/elf/dwarf2-5.d: Likewise. * testsuite/gas/elf/ehopt0.d: Likewise. * testsuite/gas/elf/elf.exp: Likewise. * testsuite/gas/elf/section11.d: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * testsuite/gas/loongarch/jmp_op.d: Regenerated. * testsuite/gas/loongarch/li.d: Likewise. * testsuite/gas/loongarch/macro_op.d: Likewise. * testsuite/gas/loongarch/macro_op_32.d: Likewise. * testsuite/gas/loongarch/macro_op_large_abs.d: Likewise. * testsuite/gas/loongarch/macro_op_large_pc.d: Likewise. * testsuite/gas/loongarch/relax_align.d: New test. * testsuite/gas/loongarch/relax_align.s: New test. * testsuite/gas/loongarch/uleb128.d: New test. * testsuite/gas/loongarch/uleb128.s: New test. 2023-05-30 mengqinggang LoongArch: binutils: Add support for linker relaxation. Add support for relocs related to relax to readelf. binutils/ChangeLog: * readelf.c (target_specific_reloc_handling): Handle ULEB128 reloc. (is_32bit_inplace_add_reloc): Handle new reloc. (is_32bit_inplace_sub_reloc): Likewise. (is_64bit_inplace_add_reloc): Likewise. (is_64bit_inplace_sub_reloc): Likewise. (is_16bit_inplace_add_reloc): Likewise. (is_16bit_inplace_sub_reloc): Likewise. (is_8bit_inplace_add_reloc): Likewise. (is_8bit_inplace_sub_reloc): Likewise. (is_6bit_inplace_sub_reloc): Likewise. (is_6bit_inplace_add_reloc): New function. (apply_relocations): Handle new reloc. * testsuite/binutils-all/readelf.exp: Add -mno-relax option for LoongArch. 2023-05-30 mengqinggang LoongArch: opcodes: Add support for linker relaxation. Set gas default to enable relax. opcodes/ChangeLog: * loongarch-opc.c (struct loongarch_ASEs_option): New member relax with the default value 1. 2023-05-30 mengqinggang LoongArch: bfd: Add support for linker relaxation. Add relax support and related relocs in bfd. bfd/ChangeLog: * bfd-in2.h: Add relocs related to relax. * elfnn-loongarch.c (struct loongarch_elf_link_hash_table): New integer pointer (data_segment_phase) to monitor the data segment phase. (loongarch_elf_check_relocs): Swap B21/B26 reloc sequence. (loongarch_elf_adjust_dynamic_symbol): Fix code format. (loongarch_reloc_rewrite_imm_insn): Fix function call. (perform_relocation): Handle new relocs related to relax. (RELOCATE_CALC_PC32_HI20): Fix code format. (RELOCATE_CALC_PC64_HI32): Likewise. (loongarch_elf_relocate_section): Handle new relocs related to relax. (loongarch_relax_delete_bytes): New function. (loongarch_relax_pcala_addi): Likewise. (loongarch_relax_pcala_ld): Likewise. (bfd_elfNN_loongarch_set_data_segment_info): Likewise. (loongarch_relax_align): Likewise. (loongarch_elf_relax_section): Likewise. (bfd_elfNN_bfd_relax_section): New macro define. * elfxx-loongarch.c (reloc_bits): New bfd point parameter. (reloc_bits_b16): Likewise. (reloc_bits_b21): Likewise. (reloc_bits_b26): Likewise. (loongarch_adjust_reloc_bitsfield): Likewise. (reloc_bits_pcrel20_s2): New function. (loongarch_elf_add_sub_reloc): Likewise. (loongarch_elf_add_sub_reloc_uleb128): Likewise. (loongarch_write_unsigned_leb128): New function. * elfxx-loongarch.h (loongarch_adjust_reloc_bitsfield): New bfd point parameter. (bfd_elf32_loongarch_set_data_segment_info): New declare. (bfd_elf64_loongarch_set_data_segment_info): Likewise. (loongarch_write_unsigned_leb128): Likewise. * libbfd.h: Add relocs related to relax. * reloc.c: Add relocs related to relax. 2023-05-30 mengqinggang LoongArch: include: Add support for linker relaxation. Add relocs and gas LARCH_opts.relax option. include/ChangeLog: * elf/loongarch.h: Add relocs. * opcode/loongarch.h: Add LARCH_opts.relax and macro LARCH_NOP. 2023-05-30 Nick Clifton Add support for an ARMMAGIC value of 0xa00 to the PE dumper. 2023-05-30 Alan Modra arm-pe objdump -P arm-pe looks to be a very old PE implementation, incompatible with current arm-wince-pe. arm-pe has different relocations and uses ARMMAGIC which has this comment: "I just made this up". Well, OK, I don't know the history but it was probably before Microsoft "just made up" their constants for ARM windows CE. This patch supports objdump -P for arm-pe, and another magic constant that may appear in object files. (I don't think binutils generates files using ARMV7PEMAGIC aka IMAGE_FILE_MACHINE_ARMNT.) * od-pe.c (is_pe_object_magic): Handle IMAGE_FILE_MACHINE_ARMNT and ARMMAGIC. 2023-05-30 Alan Modra Define IMAGE_FILE_MACHINE_ARMNT Same value as ARMV7PEMAGIC. https://learn.microsoft.com/en-us/windows/win32/sysinfo/image-file-machine-constants * coff/pe.h (IMAGE_FILE_MACHINE_ARMNT): Define. 2023-05-30 Alan Modra Don't define COFF_MAGIC This macro was unused apart from aout/encap.h, which has been deleted. * config/tc-arm.h (COFF_MAGIC): Don't define. * config/tc-sh.h (COFF_MAGIC): Don't define. * config/tc-z80.h (COFF_MAGIC): Don't define. * config/tc-z8k.h (COFF_MAGIC): Don't define. 2023-05-30 Alan Modra Delete include/aout/encap.h This file is unused and as the header comment says, obsolete. Regen binutils POTFILES.in for od-pe.c 2023-05-30 GDB Administrator Automatic date update in version.in 2023-05-29 Tom de Vries [gdb/testsuite] Fix linefeed scrolling in tuiterm I came across a bug in the implementation of line feed in tuiterm, and added a unit test that exposes it. Before sending the line feed we have: ... Screen Dump (size 8 columns x 4 rows, cursor at column 0, row 3): 0 abcdefgh 1 ijklmnop 2 qrstuvwx 3 yz01234 ... and after it we have: ... Screen Dump (size 8 columns x 4 rows, cursor at column 0, row 1): 0 ijklmnop 1 qrstuvwx 2 yz01234 3 yz01234 ... Note how the cursor started at row 3 and after the line feed ended up at row 1, while it should have stayed in row 3. Fix this by moving "incr _cur_row -1" one level up in the loop nest in proc _ctl_0x0a. Tested on x86_64-linux. 2023-05-29 Simon Marchi gdb/mi: fix ^running record with multiple MI interpreters I stumbled on the mi_proceeded and running_result_record_printed globals, which are shared by all MI interpreter instances (it's unlikely that people use multiple MI interpreter instances, but it's possible). After poking at it, I found this bug: 1. Start GDB in MI mode 2. Add a second MI interpreter with the new-ui command 3. Use -exec-run on the second interpreter This is the output I get on the first interpreter: =thread-group-added,id="i1" ~"Reading symbols from a.out...\n" ~"New UI allocated\n" (gdb) =thread-group-started,id="i1",pid="94718" =thread-created,id="1",group-id="i1" ^running *running,thread-id="all" And this is the output I get on the second intepreter: =thread-group-added,id="i1" (gdb) -exec-run =thread-group-started,id="i1",pid="94718" =thread-created,id="1",group-id="i1" *running,thread-id="all" The problem here is that the `^running` reply to the -exec-run command is printed on the wrong UI. It is printed on the first one, it should be printed on the second (the one on which we sent the -exec-run). What happens under the hood is that captured_mi_execute_command, while executing a command for the second intepreter, clears the running_result_record_printed and mi_proceeded globals. mi_about_to_proceed then sets mi_proceeded. Then, mi_on_resume_1 gets called for the first intepreter first. Since the !running_result_record_printed && mi_proceeded condition is true, it prints a ^running, and sets running_result_record_printed. When mi_on_resume_1 gets called for the second interpreter, running_result_record_printed is already set, so ^running is not printed there. It took me a while to understand the relationship between these two variables. I think that in the end, this is what we want to track: 1. When executing an MI command, take note if that command causes a "proceed". This is done in mi_about_to_proceed. 2. In mi_on_resume_1, if the command indeed caused a "proceed", we want to output a ^running record. And we want to remember that we did, because... 3. Back in captured_mi_execute_command, if we did not output a ^running, we want to output a ^done. Moving those two variables to the mi_interp struture appears to fix it. Only for the interpreter doing the -exec-run command does the running_result_record_printed flag get cleared, and therefore only or that one does the ^running record get printed. Add a new test for this, that does pretty much what the reproducer above shows. Without the fix, the test fails because mi_send_resuming_command_raw never sees the ^running record. Change-Id: I63ea30e6cb61a8e1dd5ef03377e6003381a9209b Tested-By: Alexandra Petlanova Hajkova 2023-05-29 GDB Administrator Automatic date update in version.in 2023-05-28 Tom de Vries [readline] Fix double free in _rl_scxt_dispose Consider the following scenario. We start gdb in TUI mode: ... $ gdb -q -tui ... and type ^R which gives us the reverse-isearch prompt in the cmd window: ... (reverse-i-search)`': ... and then type "foo", right-arrow-key, and ^C. In TUI mode, gdb uses a custom rl_getc_function tui_getc. When pressing the right-arrow-key, tui_getc: - attempts to scroll the TUI src window, without any effect, and - returns 0. The intention of returning 0 is mentioned here in tui_dispatch_ctrl_char: ... /* We intercepted the control character, so return 0 (which readline will interpret as a no-op). */ return 0; ... However, after this 0 is returned by the rl_read_key () call in _rl_search_getchar, _rl_read_mbstring is called, which incorrectly interprets 0 as the first part of an utf-8 multibyte char, and tries to read the next char. In this state, the ^C takes effect and we run into a double free because _rl_isearch_cleanup is called twice. Both these issues need fixing independently, though after fixing the first we no longer trigger the second. The first issue is caused by the subtle difference between: - a char array containing 0 chars, which is zero-terminated, and - a char array containing 1 char, which is zero. In mbrtowc terms, this is the difference between: ... mbrtowc (&wc, "", 0, &ps); ... which returns -2, and: ... mbrtowc (&wc, "", 1, &ps); ... which returns 0. Note that _rl_read_mbstring calls _rl_get_char_len without passing it an explicit length parameter, and consequently it cannot distinguish between the two, and defaults to the "0 chars" choice. Note that the same problem doesn't exist in _rl_read_mbchar. Fix this by defaulting to the "1 char" choice in _rl_get_char_len: ... - if (_rl_utf8locale && l > 0 && UTF8_SINGLEBYTE(*src)) + if (_rl_utf8locale && l >= 0 && UTF8_SINGLEBYTE(*src)) ... The second problem happens when the call to _rl_search_getchar in _rl_isearch_callback returns. At that point _rl_isearch_cleanup has already been called from the signal handler, but we proceed regardless, using a cxt pointer that has been freed. Fix this by checking for "RL_ISSTATE (RL_STATE_ISEARCH)" after the call to _rl_search_getchar: ... c = _rl_search_getchar (cxt); + if (!RL_ISSTATE (RL_STATE_ISEARCH)) + return 1; ... Tested on x86_64-linux. Approved-By: Chet Ramey PR tui/30056 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30056 2023-05-28 GDB Administrator Automatic date update in version.in 2023-05-27 Nelson Chu [PR ld/22263][PR ld/25694] RISC-V: Avoid dynamic TLS relocs in PIE. Lots of targets already fixed the TEXTREL problem for TLS in PIE. * For PR ld/25694, In the check_reloc, refer to spare and loongarch, they don't need to reserve any local dynamic reloc for TLS LE in pie/pde, and similar to other targets. So it seems like riscv was too conservative to estimate the TLS LE before. Just break and don't goto static_reloc for TLS LE in pie/pde can fix the TEXTREL problem. * For PR ld/22263, The risc-v code for TLS GD/IE in the relocate_section seems same as MIPS port. So similar to MIPS, pr22570, commits 9143e72c6d4d and 1cb83cac9a89, it seems also the right way to do the same thing for risc-v. On risc-v, fixes FAIL: Build pr22263-1 RISC-V haven't supported the TLS transitions, so will need the same fix (use bfd_link_dll) in the future. bfd/ PR ld/22263 PR ld/25694 * elfnn-riscv.c (riscv_elf_check_relocs): Replace bfd_link_pic with bfd_link_dll for TLS IE. Don't need to reserve the local dynamic relocation for TLS LE in pie/pde, and report error in pic just like before. (riscv_elf_relocate_section): For TLS GD/IE, use bfd_link_dll rather than !bfd_link_pic in determining the dynamic symbol index. Avoid the index of -1. 2023-05-27 GDB Administrator Automatic date update in version.in 2023-05-26 Nick Clifton Enhance objdump's --private option so that it can display the contents of PE format files. * od-pe.c: New file: Dumps fields in PE format headers. * configure.ac (od_vectors): Add objdump_private_desc_pe for PE format targets. (od_files): Add od-pe for PE format targets. * configure: Regenerate. * Makefile.am (CFILES): Add od-pe.c (EXTRA_objdump_SOURCE): Likewise. * Makefile.in: Generate. * NEWS: Mention the new feature. * doc/binutils.texi: Document the new support. * objdump.c (wide_output): Change from local to global. * objdump.h (wide_output): Prototype. (objdump_private_desc_pe): Prototype. * testsuite/binutils-all/objdump.exp: Add a test of the new feature. 2023-05-26 Andreas Schwab Remove duplicate definition * coff/pe.h (IMAGE_FILE_MACHINE_AMD64): Remove duplicate definition. Alphabetize. 2023-05-26 Jan Beulich x86: fix disassembler build after 1a3b4f90bc5f In commit 1a3b4f90bc5f ("x86: convert two pointers to (indexing) integers") I neglected the fact that compilers may warn about comparing ptrdiff_t (signed long) with size_t (unsigned long) values. Since just before we've checked that the value is positive, simply add a cast (despite my dislike for casts). 2023-05-26 Tom de Vries [gdb/testsuite] Add test-case gdb.tui/color-prompt.exp Add a test-case that sets a prompt with color in TUI. The line containing the prompt is shown by get_line_with_attrs as follows: ... (gdb) ... The 31 means red, but only for foreground colors, for background colors 41 means red. Make this more readable by using color names for both foreground and background, such that we have instead: .... (gdb) ... Tested on x86_64-linux. 2023-05-26 Tom de Vries [gdb/testsuite] Add invisible and blinking attributes in tuiterm I noticed curses using the invisible and blinking attributes. Add these in tuiterm. Tested on x86_64-linux. 2023-05-26 Tom de Vries [gdb/testsuite] Fix reverse attribute in tuiterm I noticed in proc Term::_csi_m arguments that while parameters 7 and 27 are supposed to set the reverse attribute to 1 and 0, in fact it's set to 1 in both cases: ... 7 { set _attrs(reverse) 1 } ... 27 { set _attrs(reverse) 1 } ... Fix this and add a regression test in gdb.tui/tuiterm.exp. Tested on x86_64-linux. 2023-05-26 Jan Beulich iamcu: suppress tests which can't possibly work With neither --32 nor --64 passed to gas, advanced features like AVX aren't available without explicitly enabling them. x86-64: improve gas diagnostic when no 32-bit target is configured Make this similar to --64 and --x32: Check whether a suitable target exists. x86-64: conditionalize tests using --32 Using this option doesn't really work when no support for any 32-bit target was configured in (as is the case for at least cloudabi and rdos). x86: split gas testsuite .exp file The set of 32-bit-only and 64-bit-only tests has grown quite large. In particular when one's after only the results for the 64-bit set, having them live in a separate .exp file is easier / faster. x86: convert two pointers to (indexing) integers This in particular reduces the number of pointers to non-const that we have (and that could potentially be used for undue modification of state). As a result, fetch_code()'s 2nd parameter can then also become pointer-to-const. 2023-05-26 Jan Beulich x86: disassembling over-long insns The present way of dealing with them - misusing MAX_MNEM_SIZE, which has nothing to do with insn length - leads to inconsistent results. Since we allow for up to MAX_CODE_LENGTH - 1 prefix bytes (which then could be followed by another MAX_CODE_LENGTH "normal" insn bytes until we're done decoding), size the_buffer[] accordingly. Move struct dis_private down to be able to use MAX_CODE_LENGTH without moving its #define. While doing this also alter the order to have the potentially large array last. 2023-05-26 Jan Beulich x86: use fixed-width type for codep and friends This first of all removes a dependency on bfd_byte and unsigned char being the same types. It further eliminates the need to mask by 0xff when fetching values (which wasn't done fully consistently anyway), improving code legibility. While there, where possible add const. 2023-05-26 Jan Beulich x86: figure braces aren't really part of mnemonics Instead they're separators for pseudo-prefixes. Don't insert them in mnemonic_chars[], handling them explicitly in parse_insn() instead. Note that this eliminates the need for another separator after a pseudo- prefix. While maybe not overly interesting for a following real mnemonic, I view this as quite desirable between multiple successive pseudo-prefixes (bringing things in line with the other use of figure braces in AVX512's zeroing-masking). Drop the unused is_mnemonic_char() at this occasion. 2023-05-26 Jan Beulich x86: de-duplicate operand_special_chars[] wrt extra_symbol_chars[] Having to add characters to both arrays can easily lead to oversights. Consuming extra_symbol_chars[] when populating operand_chars[] also allows to drop two special cases in md_begin(). Constify operand_special_chars[] at this occasion. 2023-05-26 Indu Bhagat sframe/doc: minor improvements for readability libsframe/ * sframe-spec.texi: Cosmetic fixes. 2023-05-26 Indu Bhagat libsframe: revisit sframe_find_fre API Inspite of implementing a rather simple functionality, this function was relatively difficult to follow, and maintain. Some changes are done now to address that - refactor the function and use better names to make it more readable. The changes to the implementation do not cause any change in the contract of the API. libsframe/ * sframe.c (sframe_fre_get_end_ip_offset): to here... (sframe_find_fre): Refactor some bits from... 2023-05-26 Indu Bhagat libsframe: use const char * consistently for immutable FRE buffers libsframe/ * sframe.c (sframe_decode_fre): Use const char * datatype when handling buffer containing the FREs. (sframe_fre_get_end_ip_offset): Likewise. (sframe_find_fre): Likewise. (sframe_decoder_get_fre): Likewise. libsframe: use uint8_t data type for FRE info related stubs libsframe/ * sframe.c: Use uint8_t for FRE offset count and FRE offset size. Use uint8_t for FRE info word as well. 2023-05-26 Alan Modra PR22263 ld test A number of targets that I test regularly fail the "Build pr22263-1" test for various reasons. arm-linux-gnueabi: "undefined reference to `__aeabi_read_tp'" ia64-linux-gnu: "Explicit stops are ignored in auto mode" m68k-linux-gnu: "undefined reference to `__m68k_read_tp'" microblaze-linux-gnu: "undefined reference to `__tls_get_addr'" nios2-linux-gnu, s390-linux-gnu and sh4-linux-gnu have a tprel reloc in .got riscv64-linux-gnu has a dynamic relocation in text So only riscv really fails the pr. The rest fail due to test issues or lack of a linker optimisation. Lack of an optimisation isn't really a fail, but it's worth keeping the test to ensure those optimisations don't regress. The xfail targets may not be an exhaustive list. This just tidies test results for those for which I have cross compilers installed. PR 22263 * testsuite/ld-elf/tls.exp: Split pr22263 test into two parts, one to check for -z text errors, the other to check tprel linker optimisation. Supply needed symbols and assembler flags. xfail the linker optimisation on targets known to fail. 2023-05-26 Tom Tromey Make MI commands const-correct I've had this patch for a while now and figured I'd update it and send it. It changes MI commands to use a "const char * const" for their argv parameter. Regression tested on x86-64 Fedora 36. Acked-By: Simon Marchi 2023-05-26 GDB Administrator Automatic date update in version.in 2023-05-25 Ciaran Woodward Fix scoped_value_mark not working with empty value chain The scoped_value_mark helper class was setting its internal mark value to NULL to indicate that the value chain had already been freed to mark. However, value_mark() also returns NULL if the value chain is empty at the time of call. This lead to the situation that if the value chain was empty at the time the scoped_value_mark was created, the class would not correctly clean up the state when it was destroyed, because it believed it had already been freed. I noticed this because I was setting a watchpoint very early in my debug session, and it was becoming a software watchpoint rather than hardware. Running any command that called evaluate() beforehand (such as 'x 0') would mean that a hardware watchpoint was correctly used. After some careful examination of the differences in execution, I noticed that values were being freed later in the 'bad case', which lead me to notice the issue with scoped_value_mark. 2023-05-25 Simon Marchi gdb: remove breakpoint_pointer_iterator Remove the breakpoint_pointer_iterator layer. Adjust all users of all_breakpoints and all_tracepoints to use references instead of pointers. Change-Id: I376826f812117cee1e6b199c384a10376973af5d Reviewed-By: Andrew Burgess 2023-05-25 Simon Marchi gdbsupport: make filtered_iterator::operator* return the same thing as underlying iterator This is the same idea as the previous patch, but for filtered_iterator. Without this patch, I would see this when applying the patch that removes reference_to_pointer_iterator from breakpoint_range: CXX breakpoint.o /home/smarchi/src/binutils-gdb/gdb/breakpoint.c: In function ‘void download_tracepoint_locations()’: /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:11007:41: error: cannot allocate an object of abstract type ‘breakpoint’ 11007 | for (breakpoint &b : all_tracepoints ()) | ^ In file included from /home/smarchi/src/binutils-gdb/gdb/gdbthread.h:26, from /home/smarchi/src/binutils-gdb/gdb/infrun.h:21, from /home/smarchi/src/binutils-gdb/gdb/gdbarch.h:28, from /home/smarchi/src/binutils-gdb/gdb/arch-utils.h:23, from /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:21: /home/smarchi/src/binutils-gdb/gdb/breakpoint.h:619:8: note: because the following virtual functions are pure within ‘breakpoint’: 619 | struct breakpoint : public intrusive_list_node | ^~~~~~~~~~ /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:250:1: note: ‘virtual breakpoint::~breakpoint()’ 250 | breakpoint::~breakpoint () | ^~~~~~~~~~ Change-Id: I05285ff27d21cb0ab80cba392ec4e959167e3cd7 Reviewed-By: Andrew Burgess 2023-05-25 Simon Marchi gdbsupport: make basic_safe_iterator::operator* return the same thing as underlying iterator Using the following patch that removes the reference_to_pointer_iterator from breakpoint_range, I would get: CXX breakpoint.o /home/smarchi/src/binutils-gdb/gdb/breakpoint.c: In function ‘void breakpoint_program_space_exit(program_space*)’: /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:3030:46: error: cannot allocate an object of abstract type ‘breakpoint’ 3030 | for (breakpoint &b : all_breakpoints_safe ()) | ^ In file included from /home/smarchi/src/binutils-gdb/gdb/gdbthread.h:26, from /home/smarchi/src/binutils-gdb/gdb/infrun.h:21, from /home/smarchi/src/binutils-gdb/gdb/gdbarch.h:28, from /home/smarchi/src/binutils-gdb/gdb/arch-utils.h:23, from /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:21: /home/smarchi/src/binutils-gdb/gdb/breakpoint.h:619:8: note: because the following virtual functions are pure within ‘breakpoint’: 619 | struct breakpoint : public intrusive_list_node | ^~~~~~~~~~ /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:250:1: note: ‘virtual breakpoint::~breakpoint()’ 250 | breakpoint::~breakpoint () | ^~~~~~~~~~ This is because the operator* method of the basic_safe_iterator iterator wrapper returns a value_type. So, even if the method of the underlying iterator (breakpoint_iterator, an intrusive_list iterator) returns a `breakpoint &`, the method of the wrapper returns a `breakpoint`. I think it would make sense for iterator wrappers such as basic_safe_iterator to return the exact same thing as the iterator they wrap. At least, it fixes my problem. Change-Id: Ibbcd390ac03d2fb6ae4854923750c8d7c3c04e8a Reviewed-By: Andrew Burgess 2023-05-25 Simon Marchi gdb: link breakpoints with intrusive_list Change-Id: I043d8d6f3dd864d80d5088f6ffc2c098337249ea Reviewed-By: Andrew Burgess 2023-05-25 Simon Marchi gdb: remove bp_location_pointer_iterator Remove the bp_location_pointer_iterator layer. Adjust all users of breakpoint::locations to use references instead of pointers. Change-Id: Iceed34f5e0f5790a9cf44736aa658be6d1ba1afa Reviewed-By: Andrew Burgess 2023-05-25 Simon Marchi gdb: use intrusive_list for breakpoint locations Replace the hand-maintained linked lists of breakpoint locations with and intrusive list. - Remove breakpoint::loc, add breakpoint::m_locations. - Add methods for the various manipulations that need to be done on the location list, while maintaining reasonably good encapsulation. - bp_location currently has a default constructor because of one use in hoist_existing_locations. hoist_existing_locations now returns a bp_location_list, and doesn't need the default-constructor bp_location anymore, so remove the bp_location default constructor. - I needed to add a call to clear_locations in delete_breakpoint to avoid a use-after-free. - Add a breakpoint::last_loc method, for use in set_breakpoint_condition. bp_location_range uses reference_to_pointer_iterator, so that all existing callers of breakpoint::locations don't need to change right now. It will be removed in the next patch. The rest of the changes are to adapt the call sites to use the new methods, of breakpoint::locations, rather than breakpoint::loc directly. Change-Id: I25f7ee3d66a4e914a0540589ac414b3b820b6e70 Reviewed-By: Andrew Burgess 2023-05-25 Simon Marchi gdbsupport: add missing increment/decrement operators to reference_to_pointer_iterator Using the following patch, I would get this build failure: CXX breakpoint.o In file included from /usr/include/c++/13.1.1/bits/stl_algobase.h:66, from /usr/include/c++/13.1.1/bits/hashtable_policy.h:36, from /usr/include/c++/13.1.1/bits/hashtable.h:35, from /usr/include/c++/13.1.1/bits/unordered_map.h:33, from /usr/include/c++/13.1.1/unordered_map:41, from /usr/include/c++/13.1.1/functional:63, from /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/ptid.h:35, from /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/common-defs.h:206, from /home/smarchi/src/binutils-gdb/gdb/defs.h:26, from /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:20: /usr/include/c++/13.1.1/bits/stl_iterator_base_funcs.h: In instantiation of ‘constexpr void std::__advance(_BidirectionalIterator&, _Distance, bidirectional_iterator_tag) [with _BidirectionalIterator = reference_to_pointer_iterator > >; _Distance = long int]’: /usr/include/c++/13.1.1/bits/stl_iterator_base_funcs.h:224:21: required from ‘constexpr void std::advance(_InputIterator&, _Distance) [with _InputIterator = reference_to_pointer_iterator > >; _Distance = long int]’ /usr/include/c++/13.1.1/bits/stl_iterator_base_funcs.h:237:19: required from ‘constexpr _InputIterator std::next(_InputIterator, typename iterator_traits<_Iter>::difference_type) [with _InputIterator = reference_to_pointer_iterator > >; typename iterator_traits<_Iter>::difference_type = long int]’ /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:1073:19: required from here /usr/include/c++/13.1.1/bits/stl_iterator_base_funcs.h:179:11: error: no match for ‘operator--’ (operand type is ‘reference_to_pointer_iterator > >’) 179 | --__i; | ^~~~~ This points out that while intrusive_list_iterator has an operator--, the reference_to_pointer_iterator wrapper does not. I'm not to sure why the compiler chooses the overload of __advance that accepts a _BidirectionalIterator, given that reference_to_pointer_iterator can't be decremented, but adding those operators seems like the right thing to do in any case, for completeness. Change-Id: I8e2044b6734fadf0f21093047cf35bb7080dbdc3 Reviewed-By: Andrew Burgess 2023-05-25 Simon Marchi gdb: add breakpoint::first_loc methods Add convenience first_loc methods to struct breakpoint (const and non-const overloads). A subsequent patch changes the list of locations to be an intrusive_list and makes the actual list private, so these spots would need to change from: b->loc to something ugly like: *b->locations ().begin () That would make the code much heavier and not readable. There is a surprisingly big number of places that access the first location of breakpoints. Whether this is correct, or these spots fail to consider the possibility of multi-location breakpoints, I don't know. But anyhow, I think that using this instead: b->first_loc () conveys the intention better than the other two forms. Change-Id: Ibbefe3e4ca6cdfe570351fe7e2725f2ce11d1e95 Reviewed-By: Andrew Burgess 2023-05-25 Simon Marchi gdb: add breakpoint "has locations" methods Add three convenience methods to struct breakpoint: - has_locations: returns true if the breakpoint has at least one location - has_single_location: returns true if the breakpoint has exactly one location - has_multiple_locations: returns true if the breakpoint has more than one location A subsequent patch changes the list of breakpoints to be an intrusive_list, so all these spots would need to change. But in any case, I think that this: if (b->has_multiple_locations ()) conveys the intention better than: if (b->loc != nullptr && b->loc->next != nullptr) Change-Id: Ib18c3605fd35d425ef9df82cb7aacff1606c6747 Reviewed-By: Andrew Burgess 2023-05-25 Simon Marchi gdb: constify breakpoint::print_it parameter The print_it method itself is const. In a subsequent patch, the locations that come out of a const breakpoint will be const as well. It will therefore be needed to make the last_loc output parameter const as well. Make that change now to reduce the size of the following patches. Change-Id: I7ed962950bc9582646e31e2e42beca2a1c9c5105 Reviewed-By: Andrew Burgess 2023-05-25 Simon Marchi gdb: make some breakpoint methods use `this` Some implementations of breakpoint::check_status and breakpoint::print_it do this: struct breakpoint *b = bs->breakpoint_at; bs->breakpoint_at is always the same as `this` (we can get convinced by looking at the call sites of check_status and print_it), so it would just be clearer to access fields through `this` instead. Change-Id: Ic542a64fcd88e31ae2aad6feff1da278c7086891 Reviewed-By: Alexandra Petlanova Hajkova Reviewed-By: Andrew Burgess 2023-05-25 Simon Marchi gdb: get gdbarch from syscall_catchpoint instead of location I noticed some methods of syscall_catchpoint doing this: struct gdbarch *gdbarch = loc->owner->gdbarch; `loc` is the list of locations of this catchpoint. Logically, the owner the locations are this catchpoint. So this just ends up getting this->gdbarch. Remove the unnecessary indirection through the loc. syscall_catchpoint::print_recreate does something slightly different, getting its arch from the loc: struct gdbarch *gdbarch = loc->gdbarch; I suppose it's always going to be the same arch, so get it from the catchpoint there too. Change-Id: I6f6a6f8e0cd7cfb754cecfb6249e71ec12ba4855 Reviewed-By: Alexandra Petlanova Hajkova Reviewed-By: Andrew Burgess 2023-05-25 Alan Modra PR29189, dlltool delaylibs corrupt float/double arguments PR 29189 * dlltool.c (i386_x64_trampoline): Save and restore xmm0-5. Make use of parameter save area for integer arg regs. Comment. 2023-05-25 GDB Administrator Automatic date update in version.in 2023-05-24 Simon Marchi gdbsupport: add support for references to checked_static_cast Add a checked_static_cast overload that works with references. A bad dynamic cast with references throws std::bad_cast, it would be possible to implement the new overload based on that, but it seemed simpler to just piggy back off the existing function. I found some potential uses of this new overload in amd-dbgapi-target.c, update them to illustrate the use of the new overload. To build amd-dbgapi-target.c, on needs the amd-dbgapi library, which I don't expect many people to have. But I have it, and it builds fine here. I did test the new overload by making a purposely bad cast and it did catch it. Change-Id: Id6b6a7db09fe3b4aa43cddb60575ff5f46761e96 Reviewed-By: Lancelot SIX Reviewed-By: Andrew Burgess 2023-05-24 Andrew Burgess gdb/testsuite: fix race in gdb.server/multi-ui-errors.exp After this commit: commit ed32754a8c7919feffc6ddb66ff1c532e4a4d1cd Date: Thu Mar 9 10:45:03 2023 +0100 [gdb/testsuite] Fix gdb.server/multi-ui-errors.exp for remote target I noticed the occasional failure in gdb.server/multi-ui-errors.exp, which looked like this: (gdb) PASS: gdb.server/multi-ui-errors.exp: interact with GDB's main UI interrupt (gdb) Program received signal SIGINT, Interrupt. 0x00007ffff7d501e7 in nanosleep () from /lib64/libc.so.6 FAIL: gdb.server/multi-ui-errors.exp: interrupt (timeout) PASS: gdb.server/multi-ui-errors.exp: interrupt arrived p server_pid $1 = 718174 (gdb) PASS: gdb.server/multi-ui-errors.exp: p server_pid This is triggered by this code in gdb.server/multi-ui-errors.exp: gdb_test "interrupt" gdb_test_multiple "" "interrupt arrived" { -re "Program received signal SIGINT, Interrupt\\.\r\n" { pass $gdb_test_name } } The problem here is that the first interrupt will trigger the prompt to be printed, and then, after some time the inferior will be interrupted. However the default pattern for gdb_test includes a '$' end anchor. If expect sees the prompt with nothing following it then everything is fine, and the test passes. However, if the interrupt is quick and so what expect sees is this: (gdb) Program received signal SIGINT, Interrupt. 0x00007ffff7d501e7 in nanosleep () from /lib64/libc.so.6 In this case the end anchor means that the gdb_test fails to match, and eventually times out. Fix this by passing -no-prompt-anchor to gdb_test. Reviewed-By: Tom de Vries 2023-05-24 Matti Puputti gdb, infcmd: Support jump command with same line in multiple symtabs If a header file defining a static function is included in multiple source files, each calling the function, and GDB is asked to jump to a line inside that function, there would be multiple locations matching the target. The solution in this commit is to select the location in the current symtab. Reviewed-By: Eli Zaretskii Approved-By: Andrew Burgess 2023-05-24 Tom Tromey Add "args" and "env" parameters to DAP launch request This patch augments the DAP launch request with some optional new parameters that let the client control the command-line arguments and the environment of the inferior. Reviewed-By: Andrew Burgess Reviewed-By: Eli Zaretskii 2023-05-24 Tom Tromey Add attributes and methods to gdb.Inferior This adds two new attributes and three new methods to gdb.Inferior. The attributes let Python code see the command-line arguments and the name of "main". Argument setting is also supported. The methods let Python code manipulate the inferior's environment variables. Reviewed-By: Eli Zaretskii 2023-05-24 Andreas Schwab Remove accidentally added file 2023-05-24 Alan Modra Don't optimise bfd_seek to same position It's not worth avoiding an fseek to the same position, and can cause problems if the linker's output file (which is opened "w+") is read, because that can result in writing, reading, then writing again. POSIX.1-2017 (IEEE Std 1003.1) says of fopen: "When a file is opened with update mode ('+' as the second or third character in the mode argument), both input and output may be performed on the associated stream. However, the application shall ensure that output is not directly followed by input without an intervening call to fflush() or to a file positioning function (fseek(), fsetpos(), or rewind()), and input is not directly followed by output without an intervening call to a file positioning function, unless the input operation encounters end-of-file." * bfdio.c (bfd_seek): Always call iovec->bseek. 2023-05-24 GDB Administrator Automatic date update in version.in 2023-05-23 Tom Tromey Handle DAP evaluate request without a frame ID DAP specifies that if an evaluate request does not have a frameID parameter, then the expression is evaluated in the global scope. 2023-05-23 Tom Tromey Add global_context parameter to gdb.parse_and_eval This adds a 'global_context' parse_and_eval to gdb.parse_and_eval. This lets users request a parse that is done at "global scope". I considered letting callers pass in a block instead, with None meaning "global" -- but then there didn't seem to be a clean way to express the default for this parameter. Reviewed-By: Eli Zaretskii 2023-05-23 Tom Tromey Add flags to parse_and_eval This adds a flags parameter to parse_and_eval. Add PARSER_LEAVE_BLOCK_ALONE flag This adds a PARSER_LEAVE_BLOCK_ALONE flag, and changes the parse API to respect it. This flag lets callers avoid any change to the passed-in block and expression PC, letting them specify the context exactly. In particular, now nullptr can be used to indicate that the parse should not examine any local variables. Add PARSER_DEBUG flag This adds a new PARSER_DEBUG constant and changes the parser code to use it. This lets us make the 'parser_debug' global 'static'. Rearrange parser_state This patch mildly rearranges parser_state, moving all the bool fields together. Boolify parser_state::comma_terminates parser_state::comma_terminates ought to be boolean, and changing it does not require any other changes. Simplify parser_state constructor This simplifies the parser_state constructor by having it accept a parser_flags parameter. Introduce and use parser flags This patch adds a new parser_flags type and changes the parser APIs to use it rather than a collection of 'int' and 'bool'. More flags will be added in subsquent patches. Move innermost_block_tracker to expression.h I think parser-defs.h should hold declarations that can be used by parser implementations, whereas expression.h should hold declarations that are used by code that wants to call a parser. Following this logic, this patch moves innermost_block_tracker to expression.h. Avoid forward declaration in parse.c This minorly rearranges parse.c to avoid the need for a forward declaration. Implement DAP loadedSources request This implements the DAP loadedSources request, using gdb.execute_mi to avoid having to write another custom Python API. 2023-05-23 Tom Tromey Implement gdb.execute_mi This adds a new Python function, gdb.execute_mi, that can be used to invoke an MI command but get the output as a Python object, rather than a string. This is done by implementing a new ui_out subclass that builds a Python object. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=11688 Reviewed-By: Eli Zaretskii 2023-05-23 Tom Tromey Add second mi_parse constructor This adds a second mi_parse constructor. This constructor takes a command name and vector of arguments, and does not do any escape processing. This also changes mi_parse::args to handle parse objects created this new way. Introduce mi_parse helper methods This introduces some helper methods for mi_parse that handle some of the details of parsing. This approach lets us reuse them later. Introduce "static constructor" for mi_parse Change the mi_parse function to be a static method of mi_parse. This lets us remove the 'set_args' setter function. Change mi_parse_argv to a method This changes mi_parse_argv to be a method of mi_parse. This is just a minor cleanup. Use accessor for mi_parse::args This changes mi_parse::args to be a private member, retrieved via accessor. It also changes this member to be a std::string. This makes it simpler for a subsequent patch to implement different behavior for argument parsing. Use member initializers in mi_parse This changes mi_parse to use member initializers rather than a constructor. This is easier to follow. Use field_signed from Python MI commands If an MI command written in Python includes a number in its output, currently that is simply emitted as a string. However, it's convenient for a later patch if these are emitted using field_signed. This does not make a difference to ordinary MI clients. 2023-05-23 Aaron Merey gdb/cli-out.c: clear_current_line shouldn't trigger pagination prompt clear_current_line overwrites the current line with chars_per_line blank spaces. Printing the final space triggers a condition in pager_file::puts that causes lines_printed to be incremented. If lines_printed becomes greater than or equal to lines_allowed, the pagination prompt will appear if enabled. In this case the prompt is unnecessary since after printing the final space clear_current_line immediately moves the cursor to the beginning of the line with '\r'. A new line isn't actually started, so the prompt ends up being spurious. Additionally it's possible for gdb to crash during this pagination prompt. Answering the prompt with 'q' throws an exception intended to bring gdb back to the main event loop. But since commit 0fea10f32746, clear_current_line may be called under the progress_update destructor. The exception will try to propagate through the destructor, causing an abort. To fix this, pagination is disabled for the duration for clear_current_line. clear_current_line is also renamed to clear_progress_notify to help indicate that it is a special purpose function intended for use with do_progress_notify. Acked-by: Eli Zaretskii 2023-05-23 Michael Matz PR30437 aarch64: make RELA relocs idempotent normally RELA relocs in BFD should not consider the contents of the relocated place. The aarch64 psABI is even stricter, it specifies (section 5.7.16) that all RELA relocs _must_ be idempotent. Since the inception of the aarch64 BFD backend all the relocs have a non-zero src_mask, and hence break this invariant. It's normally not a very visible problem as one can see it only when the relocated place already contains a non-zero value, which usually only happens sometimes when using 'ld -r' (or as in the testcase when jumping through hoops to generate the relocations). Or with alternative toolchains that do encode stuff in the relocated places with the assumption that a relocation to that place ignores whatever is there (as they can according to the psABI). Golang is such a toolchain and https://github.com/golang/go/issues/39927 is ultimately caused by this problem: the testcase testGCData failing is caused by the garbage collection data-structure to describe a type containing pointers to be wrong. It's wrong because a field that's supposed to contain a file-relative offset (to some gcbits) has a relocation applied and that relocation has an addend which also is already part of the go-produced object file (so the addend is implicitely applied twice). bfd/ PR ld/30437 * elfnn-aarch64.c (elfNN_aarch64_howto_table): Clear src_mask if all relocation descriptors. ld/ * testsuite/ld-aarch64/rela-idempotent.s: New testcase. * testsuite/ld-aarch64/rela-idempotent.d: New. * testsuite/ld-aarch64/aarch64-elf.exp: Run it. 2023-05-23 Nick Clifton Updated Swedish translation for the opcodes directory 2023-05-23 Bruno Larsen gdb/testsuite: change hardcoded assembly in gdb.arch/disp-step-insn-reloc.exp When testing gdb.arch/disp-step-insn-reloc.exp with clang in an x86_64 machine, the compiled test case would segfault when returning from the function can_relocate_call, with a suggestion of a broken stack. The example assembly in the commment was the following: f: MOV $1, %[ok] JMP end set_point0: CALL f ; tracepoint here. end: And the segmentation fault happening at the final "ret" instruction of can_relocate_call. Looking at the disassembled version of the later half of the important function, we see: Clang version (f starting at 11a4): 00000000000011ae : 11ae: e8 f1 ff ff ff callq 11a4 11b3: 89 45 fc mov %eax,-0x4(%rbp) 11b6: 83 7d fc 01 cmpl $0x1,-0x4(%rbp) 11ba: 0f 85 0a 00 00 00 jne 11ca 11c0: e8 5b 00 00 00 callq 1220 11c5: e9 05 00 00 00 jmpq 11cf 11ca: e8 61 00 00 00 callq 1230 11cf: 48 83 c4 10 add $0x10,%rsp 11d3: 5d pop %rbp 11d4: c3 retq 11d5: 66 66 2e 0f 1f 84 00 data16 nopw %cs:0x0(%rax,%rax,1) 11dc: 00 00 00 00 gcc version (f starting at 401125): 000000000040112c : 40112c: e8 f4 ff ff ff callq 401125 401131: 89 45 fc mov %eax,-0x4(%rbp) 401134: 83 7d fc 01 cmpl $0x1,-0x4(%rbp) 401138: 75 07 jne 401141 40113a: e8 c7 ff ff ff callq 401106 40113f: eb 05 jmp 401146 401141: e8 c7 ff ff ff callq 40110d 401146: 90 nop 401147: c9 leaveq 401148: c3 retq The epilogue of set_point0 (11cf for clang, 401146 for gcc) is the main difference: GCC's version uses the leaveq instruction, which resets rsp based on rbp, while clang adds the same constant to rsp that it subtracted in the prologue. Clang fails because the return address that is added by the "call f" instruction isn't accounted for. This commit fixes that by adding a return instruction to f, which leaves the rsp as the compilers would expect. Approved-By: Andrew Burgess 2023-05-23 Jan Beulich x86/Intel: address quoted-symbol related FIXMEs If in a "word ptr
" or alike construct the "ptr" part is double-quoted, it shouldn't be recognized as the specific keyword we're looking for (just like we don't recognize double-quoted operator or register names anymore). Be careful though to tell closing from opening double-quotes, as a quoted symbol may follow right afterwards. 2023-05-23 Jan Beulich x86: don't recognize quoted symbol names as registers or operators The concept of quoted symbols names was introduced pretty late. Utilize it to allow access to symbols with names matching that of a register (or, in Intel syntax, also an identifier-like operator). This is primarily to aid gcc when generating Intel syntax output; see their bug target/53929. 2023-05-23 Zhang, Jun Support Intel FRED LKGS gas/ChangeLog: * NEWS: Support Intel FRED LKGS. * config/tc-i386.c: Add fred lkgs * doc/c-i386.texi: Document .fred, .lkgs. * testsuite/gas/i386/i386.exp: Add FRED LKGS tests * testsuite/gas/i386/x86-64-fred-intel.d: Ditto. * testsuite/gas/i386/x86-64-fred.d: Ditto. * testsuite/gas/i386/x86-64-fred.s: Ditto. * testsuite/gas/i386/x86-64-lkgs-intel.d: Ditto. * testsuite/gas/i386/x86-64-lkgs-inval.l: Ditto. * testsuite/gas/i386/x86-64-lkgs-inval.s: Ditto. * testsuite/gas/i386/x86-64-lkgs.d: Ditto. * testsuite/gas/i386/x86-64-lkgs.s: Ditto. opcodes/ChangeLog: * i386-dis.c: New entry for fred, lkgs. * i386-gen.c: Add CPU_FRED CPU_LKGS. * i386-init.h : Regenerated. * i386-mnem.h : Regenerated. * i386-opc.h: Add fred, lkgs. * i386-opc.tbl: Add FRED, LKGS instructions. * i386-tbl.h: Regenerated. 2023-05-23 liuhongt Revert "Support Intel FRED LKGS" This reverts commit e5a497fe38e0ab19e16bdd9e4b4ed5e4d0056478. 2023-05-23 Zhang, Jun Support Intel FRED LKGS gas/ChangeLog: * NEWS: Support Intel FRED LKGS. * config/tc-i386.c: Add fred lkgs * doc/c-i386.texi: Document .fred, .lkgs. * testsuite/gas/i386/i386.exp: Add FRED LKGS tests * testsuite/gas/i386/x86-64-fred-intel.d: Ditto. * testsuite/gas/i386/x86-64-fred.d: Ditto. * testsuite/gas/i386/x86-64-fred.s: Ditto. * testsuite/gas/i386/x86-64-lkgs-intel.d: Ditto. * testsuite/gas/i386/x86-64-lkgs-inval.l: Ditto. * testsuite/gas/i386/x86-64-lkgs-inval.s: Ditto. * testsuite/gas/i386/x86-64-lkgs.d: Ditto. * testsuite/gas/i386/x86-64-lkgs.s: Ditto. opcodes/ChangeLog: * i386-dis.c: New entry for fred, lkgs. * i386-gen.c: Add CPU_FRED CPU_LKGS. * i386-init.h : Regenerated. * i386-mnem.h : Regenerated. * i386-opc.h: Add fred, lkgs. * i386-opc.tbl: Add FRED, LKGS instructions. * i386-tbl.h: Regenerated. 2023-05-23 GDB Administrator Automatic date update in version.in 2023-05-22 Tom de Vries [gdb/tui] Fix buglet in tui_update_variables I noticed a buglet in tui_update_variables: ... entry = translate (tui_border_kind, tui_border_kind_translate_lrcorner); if (tui_border_lrcorner != (chtype) entry->value) { tui_border_lrcorner = (entry->value < 0) ? ACS_LRCORNER : entry->value; ... When assigning the new value to tui_border_lrcorner, an entry->value of -1 is taken into account, but not when comparing to the current value of tui_border_lrcorner. Fix this by introducing: ... int val = (entry->value < 0) ? ACS_LRCORNER : entry->value; ... and using this in both comparison and assignment. Tested on x86_64-linux. 2023-05-22 Tom Tromey Remove some FIXME comments from DAP I recently added a 'dap' component to bugzilla, and I filed a few bugs there. This patch removes the corresponding FIXME comments. A few such comments still exist. In at least one case, I have a fix I'll be submitting eventually; in others I think I need to do a bit of investigation to properly file a bug report. 2023-05-22 Richard Bunt gdb: add Richard Bunt to gdb/MAINTAINERS 2023-05-22 Tom de Vries [gdb/testsuite] Add Term::get_line_with_attrs Add a new proc Term::get_line_with_attrs, similar to Term::get_line, that annotates a tuiterm line with the active attributes. For instance, the line representing the TUI status window with attribute mode standout looks like this with Term::get_line: ... exec No process In: ... L?? PC: ?? ... but like this with Term::get_line_with_attrs: ... exec No process In: ... L?? PC: ?? ... Also add Term::dump_screen_with_attrs, a Term::dump_screen variant that uses Term::get_line_with_attrs instead of Term::get_line. Tested by re-running the TUI test-cases (gdb.tui/*.exp and gdb.python/tui*.exp) on x86_64-linux. 2023-05-22 Tom de Vries [gdb/testsuite] Factor out Term::_reset_attrs Factor out new proc Term::_reset_attrs. Tested by re-running the TUI test-cases (gdb.tui/*.exp and gdb.python/tui*.exp) on x86_64-linux. 2023-05-22 Alan Modra Re: readelf: Support SHT_RELR/DT_RELR for -r Revert value of DT_ENCODING to as it was before commit a7fd118627, and adjust readelf. include/ * elf/common.h (DT_ENCODING): Set back to 32. binutils/ * readelf.c (struct filedata): Don't size dynamic_info array using DT_ENCODING. 2023-05-22 Alan Modra PowerPC64 report number of stub iterations As a developer it is sometimes useful to know how many times stubs have been resized. Report the count for users too, in ld --stats. 2023-05-22 GDB Administrator Automatic date update in version.in 2023-05-21 GDB Administrator Automatic date update in version.in 2023-05-20 Alan Modra Re: Bug 23686, two segment faults in nm The fix for pr23686 had a hole in the reloc address sanity check, the calculation could overflow. Note that stabsize is known to be a non-zero multiple of 12 so stabsize - 4 can't underflow. PR 23686 * syms.c (_bfd_stab_section_find_nearest_line): Correct r->address sanity check. 2023-05-20 Alan Modra coffcode.h handle_COMDAT tidy I started down the path of attempting to fix https://sourceware.org/pipermail/binutils/2023-April/127263.html but decided after a while that I didn't want to mess with this code.. This patch is a just a few things that I thought worth doing, the main one being reporting of errors up the call chain. The while loop to for loop change is shamelessly stolen from Oleg. * coffcode.h (handle_COMDAT): Return bool. Make sec_flags a flagword*, and adjust to suit. Replace while loop with for loop. Check isym.n_numaux before reading aux entries. Alloc coff_comdat_info and name in one call to bfd_alloc. Remove goto breakloop. (styp_to_sec_flags): Adjust handle_COMDAT call. 2023-05-20 Alan Modra tic54x set_arch_mach The tic54x backend provides its own coff_set_arch_mach, but wants to use the standard coff_set_section_contents. BFD_JUMP_TABLE_WRITE defines both of these functions, so the code also provides a wrapper for coff_set_section_contents. This is all quite OK, but I was on a mission to remove unnecessary declarations in coffcode.h, and on deleting the one for coff_set_arch_mach ran into a warning about the function being unused. I could have kept that declaration with its ATTRIBUTE_UNUSED or written "static bool ATTRIBUTE_UNUSED" on the definition but the latter is not usual and looks odd to me. So I had a closer look at tic54x_set_arch_mach and decided the function is very likely wrong to allow bfd_arch_unknown. Thus the backend should be using the standard coff_set_arch_mach. * coff-tic54x.c: Use BFD_JUMP_TABLE_WRITE (coff) in target vecs. (tic54x_coff_set_arch_mach): Delete. (tic54x_set_section_contents): Delete. * coffcode.h: Delete unnecessary forward declarations. 2023-05-20 GDB Administrator Automatic date update in version.in 2023-05-19 Tom Tromey Update documentation for Python Frame.older and Frame.newer I noticed that Frame.older and Frame.newer don't document that they return None at the ends of the stack. This patch updates the documentation, and also fixes a somewhat related typo in a comment that I noticed while digging into this. Approved-By: Eli Zaretskii 2023-05-19 Jan Beulich ld: drop stray blank from ld.texi At least older makeinfo complains about it. Also fix an apparent typo while touching that line. 2023-05-19 Jan Vrany gdb: fix post-hook execution for remote targets Commit b5661ff2 ("gdb: fix possible use-after-free when executing commands") attempted to fix possible use-after-free in case command redefines itself. Commit 37e5833d ("gdb: fix command lookup in execute_command ()") updated the previous fix to handle subcommands as well by using the original command string to lookup the command again after its execution. This fixed the test in gdb.base/define.exp but it turned out that it does not work (at least) for "target remote" and "target extended-remote". The problem is that the command buffer P passed to execute_command () gets overwritten in dont_repeat () while executing "target remote" command itself: #0 dont_repeat () at top.c:822 #1 0x000055555730982a in target_preopen (from_tty=1) at target.c:2483 #2 0x000055555711e911 in remote_target::open_1 (name=0x55555881c7fe ":1234", from_tty=1, extended_p=0) at remote.c:5946 #3 0x000055555711d577 in remote_target::open (name=0x55555881c7fe ":1234", from_tty=1) at remote.c:5272 #4 0x00005555573062f2 in open_target (args=0x55555881c7fe ":1234", from_tty=1, command=0x5555589d0490) at target.c:853 #5 0x0000555556ad22fa in cmd_func (cmd=0x5555589d0490, args=0x55555881c7fe ":1234", from_tty=1) at cli/cli-decode.c:2737 #6 0x00005555573487fd in execute_command (p=0x55555881c802 "4", from_tty=1) at top.c:688 Therefore the second call to lookup_cmd () at line 697 fails to find command because the original command string is gone. This commit addresses this particular problem by creating a *copy* of original command string for the sole purpose of using it after command execution to lookup the command again. It may not be the most efficient way but it's safer given that command buffer is shared and overwritten in hard-to-foresee situations. Tested on x86_64-linux. PR 30249 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30249 Approved-By: Tom Tromey 2023-05-19 Richard Bunt gdb: Remove redundant frame switching 547ce8f00b fixed an issue where dynamic types were not being resolved correctly prior to printing a value. The same issue was discovered when printing the value using mi-mode, which was not covered by the fix. Porting the fix to the mi-mode code path resolved the issue. However, it was discovered that a later patch series, ending 2fc3b8a4cb8, independently fixed the issue in both the cli- and mi-mode code paths, making the original fix unneeded. This commit removes this extra frame switch and adds test coverage for the mi-mode scenario to protect against any future divergence in this area. GDB built with GCC 11. No test suite regressions detected. Compilers: GCC 12.1.0, ACfL 22.1, Intel 22.1; Platforms: x86_64, aarch64. Approved-By: Tom Tromey 2023-05-19 Andrew Burgess gdb: safety checks in skip_prologue_using_sal While working on the previous patch I reverted this commit: commit e86e87f77fd5d8afb3e714f1d9e09e0ff5b4e6ff Date: Tue Nov 28 16:23:32 2006 +0000 * symtab.c (find_pc_sect_line): Do not return a line before the start of a symtab. When I re-ran the testsuite I saw some GDB crashes in the tests: gdb.dwarf2/dw2-line-number-zero.exp gdb.dwarf2/dw2-lines.exp gdb.dwarf2/dw2-vendor-extended-opcode.exp GDB was reading beyond the end of an array in the function skip_prologue_using_sal. Now, without the above commit reverted I don't believe that this should ever happen. Reverting the above commit effectively breaks GDB's symtab_and_line lookup, we try to find a result for an address, and return the wrong symtab and line-table. In skip_prologue_using_sal we then walk the line table looking for an appropriate entry, except we never find one, and GDB just keeps going, wandering off the end of the array. However, I think adding extra protection to prevent walking off the end of the array is pretty cheap, and if something does go wrong in the future then this should prevent a random crash. Obviously, I have no reproducer for this, as I said, I don't think this should impact GDB at all, this is just adding a little extra caution. Reviewed-By: Tom Tromey 2023-05-19 Andrew Burgess gdb/testsuite: test for a function with no line table This commit adds a test for the following commit: commit e86e87f77fd5d8afb3e714f1d9e09e0ff5b4e6ff Date: Tue Nov 28 16:23:32 2006 +0000 * symtab.c (find_pc_sect_line): Do not return a line before the start of a symtab. We have been carrying a test for that commit in the Fedora GDB tree since that commit was added to GDB. I don't know why the test wasn't added along with the original commit, but as was written, the test is pretty gross, it uses objcopy to pull the .text section from an object file, which was then injected into another source file within a .asm statement... ... these days we can just make use of the DWARF assembler to achieve the same results, so I've rewritten the test and think it is worth adding this to upstream GDB. The original patch was about about how we find the best symtab and line table entry, and what to do when GDB can't find a good match. The new test creates a CU with two functions, only one of which is covered by the line table. With the above patch reverted GDB returns an invalid address. With the above patch reverted I did run the testsuite to see what other tests might already be exercising this functionality, and I found two tests: gdb.dwarf2/dw2-step-out-of-function-no-stmt.exp gdb.dwarf2/dw2-vendor-extended-opcode.exp These are pretty similar, they either create minimal, or no line table for one of the functions in the source file, and as a consequence GDB returns an unexpected address at some point during the test. However, both of those tests are really focused on other issues, so I think this new test does add some value. Plus the new test is not large, so it's not a huge cost to also run this new test. Reviewed-By: Tom Tromey 2023-05-19 Andrew Burgess gdb/breakpoint: use warning function instead of gdb_printf Noticed that in breakpoint.c, in one place, we do this: gdb_printf (_("warning: Error removing " "breakpoint %d\n"), old_loc->owner->number); Instead of using the `warning` function. There are a number of differences between using gdb_printf like this and calling `warning`, the main one is probably that real warnings are sent to gdb_stderr, while the above gdb_printf call will go to gdb_stdout. In this commit I: 1. Change to call `warning`, we can drop the "warning: " prefix from the string in breakpoint.c, 2. Update the warning text, I now start with a lower case 'e', which I believe is the GDB style for warnings, 3. And I have included the address of the bp_location in the warning messsage, 4. Finally, I update all the tests (2) that include this error message. Reviewed-By: Tom Tromey 2023-05-19 Andrew Burgess gdb/testsuite: handle older Python versions in gdb.python/py-disasm.exp It was pointed out on the mailing list that the new tests added in this commit: commit 4de4e48514fc47aeb4ca95cd4091e2a333fbe9e1 Date: Tue Jan 24 15:35:45 2023 +0000 gdb/python: extend the Python Disassembler API to allow for styling will fail when GDB is built with Python 3.6 or earlier. This is because the error that is emitted when a function argument is missing changed in Python 3.7, instead of an error like this: Python Exception : function missing required argument 'style' (pos 1) earlier versions of Python emit: Python Exception : Required argument 'style' (pos 1) not found and the new tests didn't allow for this. This commit fixes this by allowing either pattern. I've tested this building GDB against Python 3.7.9 and 3.6.15, with this commit all tests in gdb.python/py-disasm.exp now pass. 2023-05-19 Kuan-Lin Chen RISC-V: Support subtraction of .uleb128. https://github.com/riscv-non-isa/riscv-elf-psabi-doc/commit/96d6e190e9fc04a8517f9ff7fb9aed3e9876cbd6 There are some known limitations for now, * Do not shrink the length of the uleb128 value, even if the value is reduced after relaxations. Also reports error if the length grows up. * The R_RISCV_SET_ULEB128 needs to be paired with and be placed before the R_RISCV_SUB_ULEB128. bfd/ * bfd-in2.h: Regenerated. * elfnn-riscv.c (perform_relocation): Perform R_RISCV_SUB_ULEB128 and R_RISCV_SET_ULEB128 relocations. Do not shrink the length of the uleb128 value, and report error if the length grows up. Called the generic functions, _bfd_read_unsigned_leb128 and _bfd_write_unsigned_leb128, to encode the uleb128 into the section contents. (riscv_elf_relocate_section): Make sure that the R_RISCV_SET_ULEB128 must be paired with and be placed before the R_RISCV_SUB_ULEB128. * elfxx-riscv.c (howto_table): Added R_RISCV_SUB_ULEB128 and R_RISCV_SET_ULEB128. (riscv_reloc_map): Likewise. (riscv_elf_ignore_reloc): New function. * libbfd.h: Regenerated. * reloc.c (BFD_RELOC_RISCV_SET_ULEB128, BFD_RELOC_RISCV_SUB_ULEB128): New relocations to support .uleb128 subtraction. gas/ * config/tc-riscv.c (md_apply_fix): Added BFD_RELOC_RISCV_SET_ULEB128 and BFD_RELOC_RISCV_SUB_ULEB128. (s_riscv_leb128): Updated to allow uleb128 subtraction. (riscv_insert_uleb128_fixes): New function, scan uleb128 subtraction expressions and insert fixups for them. (riscv_md_finish): Called riscv_insert_uleb128_fixes for all sections. include/ * elf/riscv.h ((R_RISCV_SET_ULEB128, (R_RISCV_SUB_ULEB128): Defined. ld/ * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated. * testsuite/ld-riscv-elf/uleb128*: New testcase for uleb128 subtraction. binutils/ * testsuite/binutils-all/nm.exp: Updated since RISCV supports .uleb128. 2023-05-19 Nelson Chu RISC-V: Minor improvements for dis-assembler. * Extract all private_data initializations into riscv_init_disasm_info, which called from print_insn_riscv rather than riscv_disassemble_insn. * The disassemble_free_target seems like the right place to release all target private_data, also including the internal data structures, like riscv_subsets. Therefore, add a new function, disassemble_free_riscv, to release them for safe. opcodes/ * disassemble.c (disassemble_free_target): Called disassemble_free_riscv for riscv to release private_data and internal data structures. * disassemble.h: Added extern disassemble_free_riscv. * riscv-dis.c (riscv_init_disasm_info): New function, used to init riscv_private_data. (riscv_disassemble_insn): Moved riscv_private_data initializations into riscv_init_disasm_info. (print_insn_riscv): Called riscv_init_disasm_info to init riscv_private_data once time. (disassemble_free_riscv): New function, used to free the internal data structures, like riscv_subsets. 2023-05-19 Jan Beulich x86: permit all relational operators in insn operands Oddly enough == and != were not permitted, because of '=' not having been listed in operand_special_chars[]. 2023-05-19 Jan Beulich x86: further adjust extend-to-32bit-address conditions While a442cac5084e ("ix86: wrap constants") helped address a number of inconsistencies between BFD64 and !BFD64 builds, it has also resulted in certain bogus uses of constants to no longer be warned about. Leverage the md_optimize_expr() hook to adjust when to actually truncate expressions to 32 bits - any involvement of binary expressions (which would be evaluated in 32 bits only when !BFD64) signals the need for doing so. Plain constants (or ones merely subject to unary operators) should remain un-truncated - they would be handled as bignums when !BFD64, and hence are okay to permit. To compensate - slightly extend optimize_imm() (to be honest I never understood why the code being added - or something similar - wasn't there in the first place), - adjust expectations of the disp-imm-32 testcase (there are now warnings, as there should be for any code which won't build [warning- free] when !BFD64, and Disp8/Imm8 are no longer used in the warned about cases). 2023-05-19 Jan Beulich gas: invoke md_optimize_expr() also for unary expressions Give backends a chance to see these, just as they can see binary ones. Most of those which use this hook already cope with NULL being passed for the left operand (typically because of checking the operator first). Adjust the two which don't. Take the opportunity and also document the hook. 2023-05-19 Jan Beulich gas: maintain O_constant signedness in more cases Unary '~' doesn't really produce an unsigned result. Neither does subtraction (unless taking operand values into consideration). And an abstract operator applied to two operands which aren't both unsigned can't be assumed to yield an unsigned result; exceptions are - shifts, where only signedness of the left hand operand matters, - comparisons, which - unlike unary '!' - produce signed results (they deliver 0 or ~0, as opposed to '!', which yields 0 or 1), - logical operators (yielding 0 or 1 and hence treated like unary '!'). While doing this (specifically while extending the all/quad testcase), update .quad and .8byte documentation: With 64-bit architectures now being common, it is highly inappropriate to state that these directives unconditionally require bignums. 2023-05-19 Jan Beulich x86: tighten extend-to-32bit-address conditions In a442cac5084e ("ix86: wrap constants") I made the truncation condition too relaxed: Any indication of a mode that's possible with BFD64 only should avoid the truncation. Therefore, like in the other two cases of calls to extend_to_32bit_address(), also check whether we're generating a 64-bit object. 2023-05-19 GDB Administrator Automatic date update in version.in 2023-05-18 Tom Tromey Use lower-case in @sc in the documentation Eli pointed out that @sc only produces small caps for lower case letters in its argument, so it's weird to write it using upper-case letters. This patch fixes the instances I found. Approved-By: Eli Zaretskii 2023-05-18 Simon Marchi gdb.fortran/lbound-ubound.exp: read expected lbound and ubound from function parameters (PR 30414) gdb.fortran/lbound-ubound.exp reads the expected lbound and ubound values by reading some output from the inferior. This is racy when running on boards where the inferior I/O is on a separate TTY than GDB's, such as native-gdbserver. I sometimes see this behavior: (gdb) continue Continuing. Breakpoint 2, do_test (lb=..., ub=...) at /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/nati ve-gdbserver/src/binutils-gdb/gdb/testsuite/gdb.fortran/lbound-ubound.F90:45 45 print *, "" ! Test Breakpoint (gdb) Remote debugging from host ::1, port 37496 Expected GDB Output: LBOUND = (-8, -10) UBOUND = (-1, -2) APB: Run a test here APB: Expected lbound '(-8, -10)' APB: Expected ubound '' What happened is that expect read the output from GDB before the output from the inferior, triggering this gdb_test_multiple clause: -re "$gdb_prompt $" { set found_prompt true if {$found_dealloc_breakpoint || ($expected_lbound != "" && $expected_ubound != "")} { # We're done. } else { exp_continue } } So it set found_prompt, but the gdb_test_multiple kept going because found_dealloc_breakpoint is false (this is the flag indicating that the test is finished) and we still don't have expected_lbound and expected_ubound. Then, expect reads in the inferior I/O, triggering this clause: -re ".*LBOUND = (\[^\r\n\]+)\r\n" { set expected_lbound $expect_out(1,string) if {!$found_prompt} { exp_continue } } This sets expected_lbound, but since found_prompt is true, we don't do exp_continue, and exit the gdb_test_multiple, without having an expected_ubound. Change the test to read the values from the lb and ub function parameters instead. As far as I understand, this still exercises what we want to test. These variables contain the return values of the lbound and ubound functions as computed by the program. We'll use them to check the return values of the lbound and ubound functions as computed by GDB. Change-Id: I3c4d3d17d9291870a758a42301d15a007821ebb5 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30414 2023-05-18 Hui Li gdb/elfread.c: Add plt symbol check for _PROCEDURE_LINKAGE_TABLE_ In the current code, when execute the following test on LoongArch: $ make check-gdb TESTS="gdb.base/gnu-ifunc.exp" === gdb Summary === # of expected passes 111 # of unexpected failures 62 According to IFUNC's working process [1]. first time the IFUNC function is called, the dynamic linker will not simply fill the .got.plt entry with the actual address of IFUNC symbol, it will call the IFUNC resolver function and take the return address, uses it as the sym-bound address and puts it in the .got.plt entry. Initial address in .got.plt entry is not a real function addresss. Depending on the compiler implementation, some different addresses will be filled in. Most architectures will use a .plt entry address to fill in the corresponding .got.plt entry. In gdb, elf_gnu_ifunc_resolve_addr() will be called to return a real IFUNC function addresss. First check to see if the real address for the IFUNC symbol has been resolved by the following function: elf_gnu_ifunc_resolve_name (const char *name, CORE_ADDR *addr_p) { if (elf_gnu_ifunc_resolve_by_cache (name, addr_p)) return true; if (elf_gnu_ifunc_resolve_by_got (name, addr_p)) return true; return false; } in elf_gnu_ifunc_resolve_by_got(), it gets the contents of the .got.plt entry and determines if the contents is the correct address by calling elf_gnu_ifunc_record_cache(). Based on the IFUNC working principle analysis above, the address filled in the .got.plt entry is not the actual target function address initially, it would be a .plt entry address corresponding symbol like *@plt. In this case, gdb just go back to execute the resolver function and puts the return address in the .got.plt entry. After that, gdb can get a real ifun address via .got.plt entry. On LoongArch, initially, each address filled in the .got.plt entries is the first .plt entry address. Some architectures such as LoongArch define the symbol _PROCEDURE_LINKAGE_TABLE_ at the start of the .plt section. This symbol is the first plt entry, so gdb needs to check this symbol in elf_gnu_ifunc_record_cache(). On LoongArch .got.plt and .plt section as follow: $objdump -D gdb/testsuite/outputs/gdb.base/gnu-ifunc/gnu-ifunc-0-0-0 ... 0000000120010008 <.got.plt>: 120010008: ffffffff 0xffffffff 12001000c: ffffffff 0xffffffff ... 120010018: 20004000 ll.w $zero, $zero, 64(0x40) 12001001c: 00000001 0x00000001 120010020: 20004000 ll.w $zero, $zero, 64(0x40) 120010024: 00000001 0x00000001 120010028: 20004000 ll.w $zero, $zero, 64(0x40) 12001002c: 00000001 0x00000001 120010030: 20004000 ll.w $zero, $zero, 64(0x40) 120010034: 00000001 0x00000001 ... Disassembly of section .plt: 0000000120004000 <_PROCEDURE_LINKAGE_TABLE_>: 120004000: 1c00018e pcaddu12i $t2, 12(0xc) 120004004: 0011bdad sub.d $t1, $t1, $t3 120004008: 28c021cf ld.d $t3, $t2, 8(0x8) 12000400c: 02ff51ad addi.d $t1, $t1, -44(0xfd4) 120004010: 02c021cc addi.d $t0, $t2, 8(0x8) 120004014: 004505ad srli.d $t1, $t1, 0x1 120004018: 28c0218c ld.d $t0, $t0, 8(0x8) 12000401c: 4c0001e0 jirl $zero, $t3, 0 0000000120004020 <__libc_start_main@plt>: 120004020: 1c00018f pcaddu12i $t3, 12(0xc) 120004024: 28ffe1ef ld.d $t3, $t3, -8(0xff8) 120004028: 4c0001ed jirl $t1, $t3, 0 12000402c: 03400000 andi $zero, $zero, 0x0 0000000120004030 : 120004030: 1c00018f pcaddu12i $t3, 12(0xc) 120004034: 28ffc1ef ld.d $t3, $t3, -16(0xff0) 120004038: 4c0001ed jirl $t1, $t3, 0 12000403c: 03400000 andi $zero, $zero, 0x0 0000000120004040 : 120004040: 1c00018f pcaddu12i $t3, 12(0xc) 120004044: 28ffa1ef ld.d $t3, $t3, -24(0xfe8) 120004048: 4c0001ed jirl $t1, $t3, 0 12000404c: 03400000 andi $zero, $zero, 0x0 ... With this patch: $make check-gdb TESTS="gdb.base/gnu-ifunc.exp" === gdb Summary === #of expected passes 173 [1] https://sourceware.org/glibc/wiki/GNU_IFUNC 2023-05-18 Alan Modra Re: Add section caches to coff_data_type Another thing, section target_index is renumbered in coff_compute_section_file_positions and _bfd_xcoff_bfd_final_link. I don't know that there is currently any way that the output bfd section_by_target_index could be populated before this point but clear them out so no one need worry about it. * coffcode.h (coff_compute_section_file_positions): Clear section_by_target_index hash table when changing target_index. (_bfd_xcoff_bfd_final_link): Likewise. 2023-05-18 Tom de Vries [gdb/testsuite] Fix whitespace and indentation in lib/tuiterm.exp I noticed a trailing whitespace and some indentation errors in lib/tuiterm.exp. Fix these. Tested by re-running the TUI test-cases (gdb.tui/*.exp and gdb.python/tui*.exp) on x86_64-linux. 2023-05-18 Indu Bhagat libsframe: testsuite: add tests for sframe_get_funcdesc_with_addr API sframe_get_funcdesc_with_addr API is currently used internally by the sframe_find_fre (). In this test, we create three dummy SFrame FDEs with 4 FREs each. Then, we use few negative tests to lookup FREs with PCs not in the range of PCs covered by the FDEs, ensuring graceful return from sframe_get_funcdesc_with_addr in all cases. Some positive tests are also added that exercise further scenarios as well. libsframe/ * Makefile.in: Regenerated. * testsuite/libsframe.find/find.exp: Include new test. * testsuite/libsframe.find/findfunc-1.c: New Test. * testsuite/libsframe.find/local.mk: Include new test. 2023-05-18 Indu Bhagat libsframe: testsuite: add new tests for sframe_find_fre API libsframe provides an API to find the FRE associated with a given PC in the program. This patch adds a direct test of this API. In this test, we create two dummy SFrame FDEs with 4 FREs each. Then we test that sframe_find_fre () works for the first, second, third and the last FRE from one of the FDEs. Such a test ensures better regression testing for the sframe_find_fre () function which is going to be the bread and butter of an SFrame based stack tracer. libsframe/ * Makefile.in: Regenerated. * testsuite/libsframe.find/find.exp: New test. * testsuite/libsframe.find/findfre-1.c: New test. * testsuite/libsframe.find/local.mk: Build new test. * testsuite/local.mk: Include libsframe.find. 2023-05-18 Alan Modra Re: Add section caches to coff_data_type Commit 0e759f232b6d regressed these tests: rs6000-aix7.2 +FAIL: Garbage collection test 1 (32-bit) rs6000-aix7.2 +FAIL: Garbage collection test 1 (64-bit) rs6000-aix7.2 +FAIL: Glink test 1 (32-bit) rs6000-aix7.2 +FAIL: Glink test 1 (64-bit) Investigation showed segfaults in coff_section_from_bfd_index called by xcoff_write_global_symbol due to the hash table pointer being NULL. Well, yes, the hash table isn't initialised for the output bfd. mkobject_hook is the wrong place to do that. * coffcode.h: Revert 0e759f232b6d changes. * peicode.h: Likewise. * coff-x86_64.c (htab_hash_section_index, htab_eq_section_index): Moved here from coffcode.h. (coff_amd64_rtype_to_howto): Create section_by_index htab. * coffgen.c (htab_hash_section_target_index), (htab_eq_section_target_index): Moved here from coffcode.h. (coff_section_from_bfd_index): Create section_by_target_index htab. Stash newly created sections in htab. 2023-05-18 Alan Modra PR11601, Solaris assembler compatibility doesn't work Well, it doesn't work on x86 or ppc, which both have # starting comments anywhere on a line. I think it is therefore only useful on sparc. PR 11601 * config/obj-elf.c (obj_elf_section_word): Only compile for sparc. (obj_elf_section): Only support solaris .section directive on sparc. * doc/as.texi (Section): Mention that solaris .section directive is only supported for sparc. 2023-05-18 GDB Administrator Automatic date update in version.in 2023-05-17 Tom Tromey Special case "&str" in Rust parser "&str" is an important type in Rust -- it's the type of string literals. However, the compiler puts it in the DWARF in a funny way. The slice itself is present and named "&str". However, the Rust parser doesn't look for types with names like this, but instead tries to construct them from components. In this case it tries to make a pointer-to-"str" -- but "str" isn't always available, and in any case that wouldn't yield the best result. This patch adds a special case for &str. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22251 Reviewed-By: Andrew Burgess 2023-05-17 Luca Bacci Decorated symbols in import libs (BUG 30421) PR 30421 * cofflink.c (_decoration_hash_newfunc): New function. (_bfd_coff_link_hash_table_init): Call it. * libcoff-in.h (struct coff_link_hash_table): Add decoration_hash field. (struct decoration_hash_entry): Declare. (_decoration_hash_newfunc): Prototype. * libcoff.h: Regenerate. * emultempl/pe.em (set_decoration): New function. (pe_fixup_stdcalls): Call the new function. * emultempl/pep.em (set_decoration): New function. (pep_fixup_stdcalls): Call the new function. * pe-dll.c (make_one): Check for decoated symbols. 2023-05-17 Alan Modra PR29961, plugin-api.h: "Could not detect architecture endianess" Found when attempting to build binutils on sparc sunos-5.8 where sys/byteorder.h defines _BIG_ENDIAN but not any of the BYTE_ORDER variants. This patch adds the extra tests to cope with the old machine, and tidies the header a little. PR 29961 plugin-api.h: When handling non-gcc or gcc < 4.6.0 include necessary header files before testing macros. Make more use of #elif. Test _LITTLE_ENDIAN and _BIG_ENDIAN in final tests. 2023-05-17 Alan Modra gcc-4.5 build fixes Trying to build binutils with an older gcc currently fails. Working around these gcc bugs is not onerous so let's fix them. bfd/ * elf32-csky.c (csky_elf_size_dynamic_sections): Don't type-pun pointer. * elf32-rl78.c (rl78_compute_complex_reloc): Rename "stat" variable to "status". gas/ * compress-debug.c (compress_finish): Supply all fields in ZSTD_inBuffer initialisation. include/ * xtensa-dynconfig.h (xtensa_isa_internal): Delete unnecessary forward declaration. opcodes/ * loongarch-opc.c: Supply all fields of zero struct initialisation in various opcode tables. 2023-05-17 GDB Administrator Automatic date update in version.in 2023-05-16 Vladimir Mezentsev gprofng: include a new function in the right place Static function name is not available in stripped libraries. In this case, gprofng maps PC to a fake function like @0xPC (). Sometimes gprofng creates two functions instead of one. Also FUNC_FLAG_SIMULATED is needed for these fake functions. gprofng/ChangeLog 2023-05-11 Vladimir Mezentsev * src/LoadObject.cc (LoadObject::find_function): Set FUNC_FLAG_SIMULATED. Include a new function in the right place. 2023-05-16 Tom de Vries [gdb/tui] Don't show line number for lines not in source file Currently, for a source file containing only 5 lines, we also show line numbers 6 and 7 if they're in scope of the source window: ... 0 +-compact-source.c----------------+ 1 |___3_{ | 2 |___4_ return 0; | 3 |___5_} | 4 |___6_ | 5 |___7_ | 6 +---------------------------------+ ... Fix this by not showing line numbers not in a source file, such that we have instead: ... 0 +-compact-source.c----------------+ 1 |___3_{ | 2 |___4_ return 0; | 3 |___5_} | 4 | | 5 | | 6 +---------------------------------+ ... Tested on x86_64-linux. Suggested-By: Simon Marchi Approved-By: Tom Tromey 2023-05-16 Nick Clifton Document how to use the linker to create a resource only DLL. PR 30359 * ld.texi (WIN32): Document how to create a resource only DLL. 2023-05-16 Oleg Tolmatcev Add section caches to coff_data_type * libcoff-in.h (struct coff_tdata): Add section_by_index and section_by_target_index hash tables. * libcoff.h: Regenerate. * coffcode.h (htab_hash_section_index): New function. (htab_eq_section_index): New function. (htab_hash_section_target_index): New function. (htab_eq_section_target_index): New function. (coff_mkobject_hool): Create the hash tables. * peicode.h: Add the same new functions. (pe_mkobject_hook): Create the hash tables. * coff-x86_64.c (coff_amd64_rtype_to_howto): Use the new tables to speed up lookups. * coffgen.c (coff_section_from_bfd_index): Likewise. (_bfd_coff_close_and_cleanup): Delete the hash tables. 2023-05-16 Paul Pluzhnikov Update comments for the gdb/24331 fix. Approved-by: Andrew Burgess 2023-05-16 Andrew Burgess gdb/testsuite: fix formatting of gdb.python/py-disasm.py Run black on gdb.python/py-disasm.py file and commit the changes. 2023-05-16 Andrew Burgess gdb/testsuite: make gdb_supported_languages a caching proc Rewrite gdb_supported_languages as a caching proc that actually queries GDB for the list of supported languages, rather than just containing a hard-coded list of languages. There's only one test that uses this proc right now, gdb.python/py-function.exp, and that still passes after this change, with no changes in the test names. 2023-05-16 Nick Clifton -Ur option documentation * ld.texi (-Ur): Clarify the actions of this option. 2023-05-16 Andrew Burgess gdb/testsuite: fix regressions in break-main-file-remove-fail.exp After this commit: commit a68f7e9844208ad8cd498f89b5100084ece7d0f6 Date: Tue May 9 10:28:42 2023 +0100 gdb/testsuite: extend special '^' handling to gdb_test_multiple buildbot notified me of a regression on s390 in the test: gdb.base/break-main-file-remove-fail.exp the failure looks like this: print /d ((int (*) (void *, size_t)) munmap) (16781312, 4096) warning: Error removing breakpoint 0 $2 = 0 (gdb) FAIL: gdb.base/break-main-file-remove-fail.exp: cmdline: get integer valueof "((int (*) (void *, size_t)) munmap) (16781312, 4096)" On the mailing list it has been reported that this failure also impacts arm, aarch64, and possibly ppc/ppc64 too. The above commit changed get_integer_valueof so that no output is expected between the command and the '$2 = 0' line. In this case the 'warning: Error removing breakpoint 0' output is causing the get_integer_valueof call to fail. The reason for this warning is that this test deliberately calls munmap on a page of the inferior's code. The test is checking that GDB can handle the situation where a s/w breakpoint can't be removed (due to the page no longer being readable/writable). The test that is supposed to trigger the warning is later in the test script when we delete a breakpoint. So why do some targets trigger the warning earlier during the inferior call? The impacted targets use AT_ENTRY_POINT as their strategy for handling inferior calls, that is, the trampoline that calls the inferior function is placed at the program's entry point, e.g. often the _start label. If this location happens to be on the same page as the page that the test script unmaps then, when the inferior function call returns, GDB will not be able to remove the temporary breakpoint that is inserted to catch the inferior function call returning! As a result we end up seeing the warning earlier than expected. I did wonder if this means I should relax the pattern in get_integer_valueof - just accept that there might be additional output from GDB which we should ignore. However, I don't think this the right way to go. With the change in a68f7e984420 we are now stricter for GDB emitting additional, unexpected, output, and I think that is a good thing. So, I think, in this case, in order to handle the possible extra output, we should implement something like get_integer_valueof directly in the gdb.base/break-main-file-remove-fail.exp test script. This local version will handle the possible warning output. After this the test should pass again on the impacted targets. 2023-05-16 Andrew Burgess gdb/python: extend the Python Disassembler API to allow for styling This commit extends the Python Disassembler API to allow for styling of the instructions. Before this commit the Python Disassembler API allowed the user to do two things: - They could intercept instruction disassembly requests and return a string of their choosing, this string then became the disassembled instruction, or - They could call builtin_disassemble, which would call back into libopcode to perform the disassembly. As libopcode printed the instruction GDB would collect these print requests and build a string. This string was then returned from the builtin_disassemble call, and the user could modify or extend this string as needed. Neither of these approaches allowed for, or preserved, disassembler styling, which is now available within libopcodes for many of the more popular architectures GDB supports. This commit aims to fill this gap. After this commit a user will be able to do the following things: - Implement a custom instruction disassembler entirely in Python without calling back into libopcodes, the custom disassembler will be able to return styling information such that GDB will display the instruction fully styled. All of GDB's existing style settings will affect how instructions coming from the Python disassembler are displayed in the expected manner. - Call builtin_disassemble and receive a result that represents how libopcode would like the instruction styled. The user can then adjust or extend the disassembled instruction before returning the result to GDB. Again, the instruction will be styled as expected. To achieve this I will add two new classes to GDB, DisassemblerTextPart and DisassemblerAddressPart. Within builtin_disassemble, instead of capturing the print calls from libopcodes and building a single string, we will now create either a text part or address part and store these parts in a vector. The DisassemblerTextPart will capture a small piece of text along with the associated style that should be used to display the text. This corresponds to the disassembler calling disassemble_info::fprintf_styled_func, or for disassemblers that don't support styling disassemble_info::fprintf_func. The DisassemblerAddressPart is used when libopcodes requests that an address be printed, and takes care of printing the address and associated symbol, this corresponds to the disassembler calling disassemble_info::print_address_func. These parts are then placed within the DisassemblerResult when builtin_disassemble returns. Alternatively, the user can directly create parts by calling two new methods on the DisassembleInfo class: DisassembleInfo.text_part and DisassembleInfo.address_part. Having created these parts the user can then pass these parts when initializing a new DisassemblerResult object. Finally, when we return from Python to gdbpy_print_insn, one way or another, the result being returned will have a list of parts. Back in GDB's C++ code we walk the list of parts and call back into GDB's core to display the disassembled instruction with the correct styling. The new API lives in parallel with the old API. Any existing code that creates a DisassemblerResult using a single string immediately creates a single DisassemblerTextPart containing the entire instruction and gives this part the default text style. This is also what happens if the user calls builtin_disassemble for an architecture that doesn't (yet) support libopcode styling. This matches up with what happens when the Python API is not involved, an architecture without disassembler styling support uses the old libopcodes printing API (the API that doesn't pass style info), and GDB just prints everything using the default text style. The reason that parts are created by calling methods on DisassembleInfo, rather than calling the class constructor directly, is DisassemblerAddressPart. Ideally this part would only hold the address which the part represents, but in order to support backwards compatibility we need to be able to convert the DisassemblerAddressPart into a string. To do that we need to call GDB's internal print_address function, and to do that we need an gdbarch. What this means is that the DisassemblerAddressPart needs to take a gdb.Architecture object at creation time. The only valid place a user can pull this from is from the DisassembleInfo object, so having the DisassembleInfo act as a factory ensures that the correct gdbarch is passed over each time. I implemented both solutions (the one presented here, and an alternative where parts could be constructed directly), and this felt like the cleanest solution. Reviewed-By: Eli Zaretskii Reviewed-By: Tom Tromey 2023-05-16 Andrew Burgess gdb/python: rework how the disassembler API reads the result object This commit is a refactor ahead of the next change which will make disassembler styling available through the Python API. Unfortunately, in order to make the styling support available, I think the easiest solution is to make a very small change to the existing API. The current API relies on returning a DisassemblerResult object to represent each disassembled instruction. Currently GDB allows the DisassemblerResult class to be sub-classed, which could mean that a user tries to override the various attributes that exist on the DisassemblerResult object. This commit removes this ability, effectively making the DisassemblerResult class final. Though this is a change to the existing API, I'm hoping this isn't going to cause too many issues: - The Python disassembler API was only added in the previous release of GDB, so I don't expect it to be widely used yet, and - It's not clear to me why a user would need to sub-class the DisassemblerResult type, I allowed it in the original patch because at the time I couldn't see any reason to NOT allow it. Having prevented sub-classing I can now rework the tail end of the gdbpy_print_insn function; instead of pulling the results out of the DisassemblerResult object by calling back into Python, I now cast the Python object back to its C++ type (disasm_result_object), and access the fields directly from there. In later commits I will be reworking the disasm_result_object type in order to hold information about the styled disassembler output. The tests that dealt with sub-classing DisassemblerResult have been removed, and a new test that confirms that DisassemblerResult can't be sub-classed has been added. Reviewed-By: Eli Zaretskii Reviewed-By: Tom Tromey 2023-05-16 GDB Administrator Automatic date update in version.in 2023-05-15 Tom Tromey Correctly handle forward DIE references in scanner The cooked index scanner has special code to handle forward DIE references. However, a bug report lead to the discovery that this code does not work -- the "deferred_entry::spec_offset" field is written to but never used, i.e., the lookup is done using the wrong key. This patch fixes the bug and adds a regression test. The test in the bug itself used a thread_local variable, which provoked a failure at runtime. This test instead uses "maint print objfiles" and then inspects to ensure that the entry in question has a parent. This lets us avoid a clang dependency in the test. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30271 2023-05-15 mengqinggang LoongArch: Fix PLT entry generate bug If a function symbol only get its address by la.global, without directly called by bl instruction, the PLT entry is not required. bfd/ChangeLog: * elfnn-loongarch.c (loongarch_elf_adjust_dynamic_symbol): Fix PLT entry generate bug. ld/ChangeLog: * testsuite/ld-elf/shared.exp: Clear xfail for LoongArch. 2023-05-15 GDB Administrator Automatic date update in version.in 2023-05-14 GDB Administrator Automatic date update in version.in 2023-05-13 Paul Pluzhnikov Fix bad interaction between element limit and repeated values (BZ#24331). Currently print -elements=3 -- "AAAAAA" prints complete string, which is not what the user asked for. Fix two buggy tests exposed by the fix, and add a new test. Reviewed-by: Keith Seitz 2023-05-13 Alan Modra PR28955 mips gas segfault Testing for NULL in pic_need_relax fixes the other call to this function in md_estimate_size_before_relax. PR 28955 * config/tc-mips.c (mips_frob_file): Move NULL sym test to.. (pic_need_relax): ..here. 2023-05-13 Alan Modra PR28902, -T script with INSERT ordering The answer to PR28902 may be deduced from the existing INSERT documentation that says the default script is parsed after the -T INSERT script, if you assume (correctly) that nothing special is done when inserting into -T scripts overriding the default script. In both cases INSERT handling looks for the specified output section later on the internal list of parsed script commands. This isn't obvious though, so make the ordering explicit, and mention that section assignments are the same too. PR 28902 * ld.texi (INSERT): Specify ordering when -T is used both to override the default script and to augment. 2023-05-13 GDB Administrator Automatic date update in version.in 2023-05-12 Tom Tromey Fix regression due to Pragma Import series A co-worker here at AdaCore discovered that the Pragma Import series caused a rgression. When debugging gnat1, gdb started asking for overload resolution like: (gdb) call pp(n) Multiple matches for pp [0] cancel [1] pp (types.union_id) at ../../gcc/gcc/ada/treepr.adb:511 [2] treepr.pp (types.union_id) at ../../gcc/gcc/ada/treepr.adb:511 This worked before the series, and is strange anyway, because the matches refer to the same function. This patch adds a test case for this situation and fixes the bug by pruning identical functions in remove_extra_symbols. 2023-05-12 Tom Tromey Use bool and early loop exit in remove_extra_symbols This changes remove_extra_symbols to use bool rather than int, and changes the nested loops to exit early when "remove_p" is set. Use reference parameter in remove_extra_symbols Changing ada-lang.c:remove_extra_symbols to take a reference parameter makes the code a bit easier to read, by replacing "(*syms)" with plain "syms". Handle Ada Pragma Import and Pragma Export Ada can import C APIs and also export Ada constructs to C via Pragma Import and Pragma Export. This patch adds support for these to gdb, by arranging to either defer some aspects of a symbol to the underlying C symbol (for Import) or by introducing a second symbol (for Export). A somewhat tricky approach is needed, both because gdb doesn't generally handle symbol aliasing, and because Ada treats symbol names in an unusual way (as compared to the rest of gdb). Introduce symbol_block_ops::get_block_value This adds a new callback to symbol_block_ops. This callback lets a LOC_BLOCK symbol implement its own function to find the underlying block. Define symbol::value_block separately This moves the definition of symbol::value_block outside of the class. A subsequent patch will change this method to use SYMBOL_BLOCK_OPS, and it seemed simplest to move this method out-of-line, and cleaner to do this as a separate change. Bump MAX_SYMBOL_IMPLS A subsequent patch will introduce more aclass registrations, causing the number to go over the current maximum. This bumps the number. Note that there's a separate static assert that ensures that this number doesn't get too large for the field size in the symbol. Introduce lookup_minimal_symbol_linkage This introduces a new function, lookup_minimal_symbol_linkage, and refactors a couple other existing functions to call it. This function will be used in a subsequent patch. 2023-05-12 Simon Marchi gdb: remove unnecessary call to std::string constructor I spotted this explicit call to std::string, which creates an unnecessary temporary extra std::string, while calling emplace_back. I'm not sure if it has any impact in an optimized build, maybe the compiler elides it. But still, it's unnecessary. Change-Id: I873337ea91db29ac06267aff8fc12dcf52824cac Approved-By: Tom Tromey 2023-05-12 Tom Tromey Add dynamic_prop::is_constant I noticed many spots checking whether a dynamic property's kind is PROP_CONST. Some spots, I think, are doing a slightly incorrect check -- checking for != PROP_UNDEFINED where == PROP_CONST is actually required, the key thing being that const_val may only be called for PROP_CONST properties. This patch adds dynamic::is_constant and then updates these checks to use it. Regression tested on x86-64 Fedora 36. 2023-05-12 Tom Tromey Implement DAP register scope I noticed that gdb's DAP code did not provide a way to see register values. DAP defines a "register" scope, which this patch implements. This patch also adds the missing (and optional) "presentationHint" to scopes. 2023-05-12 Tom Tromey Fix calling debuginfo-less functions in Ada A co-worker at AdaCore noticed that calling a function without debuginfo yields: (gdb) print plus_one(23) 'pck.plus_one' has unknown return type; cast the call to its declared return type However, this also happens if you follow the directions and add the cast. This patch fixes the problem and adds a regression test. 2023-05-12 Andrew Burgess gdb/python: implement DisassemblerResult.__str__ method Add the DisassemblerResult.__str__ method. This gives the same result as the DisassemblerResult.string attribute, but can be useful sometimes depending on how the user is trying to print the object. There's a test for the new functionality. 2023-05-12 Andrew Burgess gdb/python: implement __repr__ methods for py-disasm.c types Add a __repr__ method for the DisassembleInfo and DisassemblerResult types, and add some tests for these new methods. 2023-05-12 Andrew Burgess gdb/doc: improve Python Disassembler API documentation Some small improvements to the Python Disassembler API documentation: * Be consistent about using the package scope in the @deftp lines, * Rework the description of the DisassemblerResult class to include mention of builtin_disassemble. 2023-05-12 Andrew Burgess gdb/testsuite: extend special '^' handling to gdb_test_multiple The commit: commit 08ec06d6440745ef9204d39197aa1e732df41056 Date: Wed Mar 29 10:41:07 2023 +0100 gdb/testsuite: special case '^' in gdb_test pattern Added some special handling of '^' to gdb_test -- a leading '^' will cause the command regexp to automatically be included in the expected output pattern. It was pointed out that the '-wrap' flag of gdb_test_multiple is supposed to work in the same way as gdb_test, and that the recent changes for '^' had not been replicated for gdb_test_multiple. This patch addresses this issue. So, after this commit, the following two constructs should have the same meaning: gdb_test "command" "^output" "test name" gdb_test_multiple "command" "test name" { -re -wrap "^output" { pass $gdb_test_name } } In both cases the '^' will case gdb.exp to inject a regexp that matches 'command' after the '^' and before the 'output', this is in addition to adding the $gdb_prompt pattern after 'output' in the normal way. The special '^' handling is only applied when '-wrap' is used, as this is the only mode that aims to mimic gdb_test. While working on this patch I realised that I could actually improve the logic for the special '^' handling in the case where the expected output pattern is empty. I replicated these updates for both gdb_test and gdb_test_multiple in order to keep these two paths in sync. There were a small number of tests that needed adjustment after this change, mostly just removing command regexps that are now added automatically, but the gdb.base/settings.exp case was a little weird as it turns out trying to match a single blank line is probably harder now than it used to be -- still, I suspect this is a pretty rare case, so I think the benefits (improved anchoring) outweigh this small downside (IMHO). 2023-05-12 Andrew Burgess gdb: fix error message for $_gdb_maint_setting I spotted this behaviour: (gdb) p $_gdb_maint_setting("xxx") First argument of $_gdb_maint_setting must be a valid setting of the 'show' command. Notice that GDB claims I need to use a setting from the 'show' command, which isn't correct for $_gdb_maint_setting, in this case I need to use a setting from 'maintenance show'. This same issue is present for $_gdb_maint_setting_str. This commit fixes this minor issue. Approved-By: Simon Marchi 2023-05-12 Tom de Vries [gdb/testsuite] Fix gdb.dwarf2/opt-out-not-implptr.exp for -m32 When running test-case gdb.dwarf2/opt-out-not-implptr.exp with target board unix/-m32 we have: ... (gdb) print noptr^M $1 = {0, , , }^M (gdb) FAIL: gdb.dwarf2/opt-out-not-implptr.exp: print noptr ... The problem happens when evaluating this dwarf expression: ... <45> DW_AT_location : 13 byte block: 10 86 ea d7 d0 96 8e cf 92 5c 9f 93 8 \ (DW_OP_constu: 6639779683436459270; DW_OP_stack_value; DW_OP_piece: 8) ... The DW_OP_constu pushes a value with "generic type" on to the DWARF stack, and the "generic type" has the size of an address on the target machine, which for target board unix/-m32 is 4 bytes. Consequently, the constant is abbreviated. Next, the DW_OP_piece declares that the resulting 4-byte value is 8 bytes large, and we hit this clause in rw_pieced_value: ... /* Use zeroes if piece reaches beyond stack value. */ if (p->offset + p->size > stack_value_size_bits) break; ... and consequently get a zero. We could just add require is_target_64 to the test-case, but instead, add a 32-bit case and require is_target_64 just for the 64-bit case. Tested on x86_64-linux. 2023-05-12 Tom de Vries [gdb/testsuite] Make is_64_target more robust I ran test-case gdb.dwarf2/opt-out-not-implptr.exp with make-check-all.sh, and with target board dwarf64 ran into: ... FAIL: gdb.dwarf2/opt-out-not-implptr.exp: print noptr ... due to is_target_64 failing because of: ... builtin_spawn -ignore SIGHUP gcc -fno-stack-protector \ -fdiagnostics-color=never -w -c -gdwarf64 -g -o is_64_target.o \ is_64_target.c^M gcc: error: '-gdwarf64' is ambiguous; use '-gdwarf-64' for DWARF version or \ '-gdwarf -g64' for debug level^M compiler exited with status 1 ... The FAIL is the same FAIL I run into with target board unix/-m32: is_target_64 fails for both cases. The reason that is_target_64 is failing for target board dwarf64, is because of using system compiler 7.5.0 which doesn't support -gdwarf64. Fix this by making is_target_64 use nodebug instead of debug for compilation. Tested on x86_64-linux. 2023-05-12 Tom de Vries [gdb/cli] Fix wrapping for TERM=ansi I. Auto-detected width (xterm vs. ansi) Say we have a terminal with a width of 40 chars: ... $ echo $COLUMNS 40 ... With TERM=xterm, we report a width of 40 chars: ... $ TERM=xterm gdb (gdb) show width Number of characters gdb thinks are in a line is 40. ... And with TERM=ansi, a width of 39 chars: ... $ TERM=ansi gdb (gdb) show width Number of characters gdb thinks are in a line is 39. ... Gdb uses readline to auto-detect screen size, and readline decides in the TERM=ansi case that the terminal does not have reliable auto-wrap, and consequently decides to hide the last terminal column from the readline user (in other words GDB), hence we get 39 instead of 40. II. Types of wrapping Looking a bit more in detail inside gdb, it seems there are two types of wrapping: - readline wrapping (in other words, prompt edit wrapping), and - gdb output wrapping (can be observed by issuing "info sources"). This type of wrapping attempts to wrap some of the gdb output earlier than the indicated width, to not break lines in inconvenient places. III. Readline wrapping, auto-detected screen size Let's investigate readline wrapping with the auto-detected screen widths. First, let's try with xterm: ... $ TERM=xterm gdb (gdb) 7890123456789012345678901234567890 123 ... That looks as expected, wrapping occurs after 40 chars. Now, let's try with ansi: ... $ TERM=ansi gdb (gdb) 78901234567890123456789012345678 90123 ... It looks like wrapping occurred after 38, while readline should be capable of wrapping after 39 chars. This is caused by readline hiding the last column, twice. In more detail: - readline detects the screen width: 40, - readline hides the last column, setting the readline screen width to 39, - readline reports 39 to gdb as screen width, - gdb sets its width setting to 39, - gdb sets readline screen width to 39, - readline hides the last column, again, setting the readline screen width to 38. This is reported as PR cli/30346. IV. gdb output wrapping, auto-detected screen size Say we set the terminal width to 56. With TERM=xterm, we have: ... /home/abuild/rpmbuild/BUILD/glibc-2.31/csu/elf-init.c, /data/vries/hello.c, ... but with TERM=ansi: ... /home/abuild/rpmbuild/BUILD/glibc-2.31/csu/elf-init.c, / data/vries/hello.c, ... So what happened here? With TERM=ansi, the width setting is auto-detected to 55, and gdb assumes the terminal inserts a line break there, which it doesn't because the terminal width is 56. This is reported as PR cli/30411. V. Fix PRs Fix both mentioned PRs by taking into account the hidden column when readline reports the screen width in init_page_info, and updating chars_per_line accordingly. Note that now we report the same width for both TERM=xterm and TERM=ansi, which is much clearer. The point where readline respectively expects or ensures wrapping is still indicated by "maint info screen", for xterm: ... Number of characters readline reports are in a line is 40. ... and ansi: ... Number of characters readline reports are in a line is 39. ... VI. Testing PR cli/30346 is covered by existing regression tests gdb.base/wrap-line.exp and gdb.tui/wrap-line.exp, so remove the KFAILs there. I didn't manage to come up with a regression test for PR cli/30411. Perhaps that would be easier if we had a maintenance command that echoes its arguments while applying gdb output wrapping. Tested on x86_64-linux. PR cli/30346 PR cli/30411 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30346 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30411 2023-05-12 Jan Beulich x86: move a few more disassembler helper functions ... such that they wouldn't need forward declarations anymore. Note that append_seg() already was suitably placed. x86: move get() disassembler helper functions ... such that none of them would need forward declarations anymore. x86: slightly simplify i386_parse_name() With the switch to parse_real_register() (commit 4faaa10f3fab) "bad_reg" cannot come back anymore. Drop the respective check. 2023-05-12 Jan Beulich gas: equates of registers There are two problems: symbol_equated_p() doesn't recognize equates of registers, and S_CAN_BE_REDEFINED() goes by section rather than by expression type. Both together undermine .eqv and .equiv clearly meaning to guard the involved symbols against re-definition (both ways). To compensate pseudo_set() now using O_symbol and S_CAN_BE_REDEFINED() now checking for O_register, - for targets creating register symbols through symbol_{new,create}() -> symbol_init() -> S_SET_VALUE() (alpha, arc, dlx, ia64, m68k, mips, mmix, tic4x, tic54x, plus anything using cgen or itbl-ops), have symbol_init() set their expressions to O_register, - x86'es parse_register() also can't go by section anymore when trying to "look through" equates; probably symbol_equated_p() should have been used there from the beginning, if only that had worked for equates of registers, - various targets need to "look through" equates when parsing insn operands (which also helps transitive forward equates); perhaps even more ought to, but many don't look to consider the possibility of register equates in the first place. This was uncovered by code reported in PR gas/30274 (duplicating PR gas/30272), except that there .eqv was used when really .equ was meant. Therefore that bug report is addressed here only in so far as gas wouldn't crash anymore; the code there still won't assemble successfully, just that now the issues there are properly diagnosed. 2023-05-12 GDB Administrator Automatic date update in version.in 2023-05-11 Tom Tromey Do not print when piece is optimized out A user reported a bug where printing a certain array of integer types would result in the nonsensical: (gdb) p l_126 $1 = {6639779683436459270, , , } I tracked this down to some issues in the DWARF expression code. First, check_pieced_synthetic_pointer did not account for the situation where a location expression does not describe all the bits of a value -- in this case it returned true, meaning there is a synthetic pointer, but in fact these bits are optimized out. (It turns out this incorrect output had already been erroneously tested for as well.) Next, rw_pieced_value did not mark these bits as optimized-out, either. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30296 2023-05-11 Aaron Merey gdb/testsuite: Match file size in gdb.debuginfod/crc_mismatch.exp gdb's debuginfod progress messages include the size of the file being downloaded if the size information is available at the time the message is printed. For example: Downloading 10 MB separate debug info for /lib64/libxyz.so This size information is omitted if it's not available at the time of printing: Downloading separate debug info for /lib64/libxyz.so A pattern in crc_mismatch.exp fails to be matched if a progress message includes a file size. Add a wildcard to the pattern so that it matches the progress message whether or not it includes the file size. 2023-05-11 Johnson Sun Disable out-of-scope watchpoints Currently, when a local software watchpoint goes out of scope, GDB sets the watchpoint's disposition to `delete at next stop' and then normal stops (i.e., stop and wait for the next GDB command). When GDB normal stops, it automatically deletes the breakpoints with their disposition set to `delete at next stop'. Suppose a Python script decides not to normal stop when a local software watchpoint goes out of scope, the watchpoint will not be automatically deleted even when its disposition is set to `delete at next stop'. Since GDB single-steps the program and tests the watched expression after each instruction, not deleting the watchpoint causes the watchpoint to be hit many more times than it should, as reported in PR python/29603. This was happening because the watchpoint is not deleted or disabled when going out of scope. This commit fixes this issue by disabling the watchpoint when going out of scope. It also adds a test to ensure this feature isn't regressed in the future. Calling `breakpoint_auto_delete' on all kinds of stops (in `fetch_inferior_event') seem to solve this issue, but is in fact inappropriate, since `breakpoint_auto_delete' goes over all breakpoints instead of just going through the bpstat chain (which only contains the breakpoints that were hit right now). Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29603 Change-Id: Ia85e670b2bcba2799219abe4b6be3b582387e383 2023-05-11 Tom Tromey Add "scheduler-locking" to documentation index I noticed that "scheduler-locking" does not appear in the index of the gdb manual. This patch corrects this oversight. 2023-05-11 Joseph Myers Add LDPT_REGISTER_CLAIM_FILE_HOOK_V2 linker plugin hook [GCC PR109128] This is one part of the fix for GCC PR109128, along with a corresponding GCC change. Without this patch, what happens in the linker, when an unused object in a .a file has offload data, is that elf_link_is_defined_archive_symbol calls bfd_link_plugin_object_p, which ends up calling the plugin's claim_file_handler, which then records the object as one with offload data. That is, the linker never decides to use the object in the first place, but use of this _p interface (called as part of trying to decide whether to use the object) results in the plugin deciding to use its offload data (and a consequent mismatch in the offload data present at runtime). The new hook allows the linker plugin to distinguish calls to claim_file_handler that know the object is being used by the linker (from ldmain.c:add_archive_element), from calls that don't know it's being used by the linker (from elf_link_is_defined_archive_symbol); in the latter case, the plugin should avoid recording the object as one with offload data. bfd/ * plugin.c (struct plugin_list_entry): Add claim_file_v2. (register_claim_file_v2): New. (try_load_plugin): Use LDPT_REGISTER_CLAIM_FILE_HOOK_V2. (ld_plugin_object_p): Take second argument. (bfd_link_plugin_object_p): Update call to ld_plugin_object_p. (register_ld_plugin_object_p): Update argument prototype. (bfd_plugin_object_p): Update call to ld_plugin_object_p. * plugin.h (register_ld_plugin_object_p): Update argument prototype. include/ * plugin.api.h (ld_plugin_claim_file_handler_v2) (ld_plugin_register_claim_file_v2) (LDPT_REGISTER_CLAIM_FILE_HOOK_V2): New. (struct ld_plugin_tv): Add tv_register_claim_file_v2. ld/ * plugin.c (struct plugin): Add claim_file_handler_v2. (LDPT_REGISTER_CLAIM_FILE_HOOK_V2): New. (plugin_object_p): Add second argument. Update call to plugin_call_claim_file. (register_claim_file_v2): New. (set_tv_header): Handle LDPT_REGISTER_CLAIM_FILE_HOOK_V2. (plugin_call_claim_file): Add argument known_used. (plugin_maybe_claim): Update call to plugin_object_p. * testplug.c, testplug2.c, testplug3.c, testplug4.c: Handle LDPT_REGISTER_CLAIM_FILE_HOOK_V2. * testsuite/ld-plugin/plugin-1.d, testsuite/ld-plugin/plugin-10.d, testsuite/ld-plugin/plugin-11.d, testsuite/ld-plugin/plugin-13.d, testsuite/ld-plugin/plugin-14.d, testsuite/ld-plugin/plugin-15.d, testsuite/ld-plugin/plugin-16.d, testsuite/ld-plugin/plugin-17.d, testsuite/ld-plugin/plugin-18.d, testsuite/ld-plugin/plugin-19.d, testsuite/ld-plugin/plugin-2.d, testsuite/ld-plugin/plugin-26.d, testsuite/ld-plugin/plugin-3.d, testsuite/ld-plugin/plugin-30.d, testsuite/ld-plugin/plugin-4.d, testsuite/ld-plugin/plugin-5.d, testsuite/ld-plugin/plugin-6.d, testsuite/ld-plugin/plugin-7.d, testsuite/ld-plugin/plugin-8.d, testsuite/ld-plugin/plugin-9.d: Update test expectations. 2023-05-11 GDB Administrator Automatic date update in version.in 2023-05-10 Tom de Vries [gdb/tui] Fix tui compact-source a bit more Andrew pointed out that the behaviour as tested in gdb.tui/compact-source.exp is incorrect: ... 0 +-compact-source.c--------------------------------------------------------+ 1 |___3_{ | 2 |___4_ return 0; | 3 |___5_} | 4 |___6_ | 5 |___7_ | 6 |___8_ | 7 |___9_ | 8 +-------------------------------------------------------------------------+ ... The last line number in the source file is 5, and there are 7 lines to display source lines, so if we'd scroll all the way down, the first line number in the source window would be 5, and the last one would be 11. To represent 11 we'd need 2 digits, so we expect to see ___04_ here instead of ___4_, even though all line numbers currently in the src window (3-9) can be represented with only 1 digit. Fix this in tui_source_window::set_contents, by updating the computation of max_line_nr: ... - int max_line_nr = std::max (lines_in_file, last_line_nr_in_window); + int max_line_nr = lines_in_file + nlines - 1; ... Tested on x86_64-linux. Co-Authored-By: Andrew Burgess Approved-By: Tom Tromey 2023-05-10 Andrew Burgess gdb/rust: fix crash for expression debug with strings While working on another patch I did this: (gdb) set debug expression 1 (gdb) set language rust (gdb) p "foo" Operation: OP_AGGREGATE Type: &str Fatal signal: Segmentation fault ... etc ... The problem is that the second field of the rust_aggregate_operation is created as a nullptr, this can be seen in rust-parse.c. in the function rust_parser::parse_string(). However, in expop.h, in the function dump_for_expression, we make the assumption that the expressions will never be nullptr. I did consider moving the nullptr handling into a new function rust_aggregate_operation::dump, however, as the expression debug dumping code is not exercised as much as it might be, I would rather that this code be hardened and able to handle a nullptr without crashing, so I propose that we add nullptr handling into the general dump_for_expression function. The behaviour is now: (gdb) set debug expression 1 (gdb) set language rust (gdb) p "foo" Operation: OP_AGGREGATE Type: &str nullptr Vector: String: data_ptr Operation: UNOP_ADDR Operation: OP_STRING String: foo String: length Operation: OP_LONG Type: usize Constant: 3 evaluation of this expression requires the target program to be active (gdb) There's a new test to check for this case. Reviewed-By: Tom Tromey 2023-05-10 Alan Modra Re: stack overflow in debug_write_type Apparently u.kindirect->slot can point at a NULL. * debug.c (debug_write_type): Don't segfault on NULL indirect. 2023-05-10 Luca Bonissi or1k relocation truncated to fit: R_OR1K_GOT16 even when using -mcmodel=large PR 30422 * elf32-or1k.c (or1k_elf_relocate_section): Prescan for R_OR1K_GOT_AHI16 relocs as they may occur after R_OR1K_GOT16 relocs. 2023-05-10 Nick Clifton Add linker option to include local symbols in the linker map. PR 16566 * ldlang.c (ld_is_local_symbol): New function. (print_input_section): Add code to display local symbols in the section. * ldlex.h (enum option_values): Add OPTION_PRINT_MAP_LOCALS and OPTION_PRINT_MAP_LOCALS. * lexsup.c (ld_options[]): Add entries for --print-map-locals and --no-print-map-locals. * NEWS: Mention the new feature. * ld.h (struct ld_config_type): Add print_map_locals field. * ld.texi: Document the new command line option. * testsuite/ld-scripts/sizeof.s: Add a local symbol. * testsuite/ld-scripts/map-locals.d: New test control file. * testsuite/ld-scripts/map-address.exp: Run the new test. 2023-05-10 Tom de Vries [gdb/tui] Fix tui compact-source Consider a hello.c, with less than 10 lines: ... $ wc -l hello.c 8 hello.c ... and compiled with -g into an a.out. With compact-source off: ... $ gdb -q a.out \ -ex "set tui border-kind ascii" \ -ex "maint set tui-left-margin-verbose on" \ -ex "set tui compact-source off" \ -ex "tui enable" ... we get: ... +-./data/hello.c-----------------------+ |___000005_{ | |___000006_ printf ("hello\n"); | |___000007_ return 0; | |___000008_} | |___000009_ | |___000010_ | |___000011_ | ... but with compact-source on: ... +-./data/hello.c-----------------------+ |___5{ | |___6 printf ("hello\n"); | |___7 return 0; | |___8} | |___9 | |___1 | |___1 | ... There are a couple of problems with compact-source. First of all the documentation mentions: ... The default display uses more space for line numbers and starts the source text at the next tab stop; the compact display uses only as much space as is needed for the line numbers in the current file, and only a single space to separate the line numbers from the source. ... The bit about the default display and the next tab stop looks incorrect. The source doesn't start at a tab stop, instead it uses a single space to separate the line numbers from the source. Then the documentation mentions that there's single space in the compact display, but evidently that's missing. Then there's the fact that the line numbers "10" and "11" are both abbreviated to "1" in the compact case. The abbreviation is due to allocating space for , which is 8 for this example, and takes a single digit. The line numbers though continue past the end of the file, so fix this by allocating space for max (, ), which in this example takes 2 digits. The missing space is due to some confusion about what the "1" here in tui_source_window::set_contents represent: ... double l = log10 ((double) offsets->size ()); m_digits = 1 + (int) l; ... It could be the trailing space that's mentioned in tui-source.h: ... /* How many digits to use when formatting the line number. This includes the trailing space. */ int m_digits; ... Then again, it could be part of the calculation for the number of digits needed for printing. With this minimal example: ... int main () { for (int i = 8; i <= 11; ++i) { double l = log10 ((double) i); printf ("%d %d\n", i, (int)l); } return 0; } ... we get: ... $ ./a.out 8 0 9 0 10 1 11 1 ... which shows that the number of digits needed for printing i is "1 + (int)log10 ((double) i)". Fix this by introducing named variables needed_digits and trailing_space, each adding 1. With the fixes, we get for compact-source on: ... +-./data/hello.c-----------------------+ |___05_{ | |___06_ printf ("hello\n"); | |___07_ return 0; | |___08_} | |___09_ | |___10_ | |___11_ | |... Also fix the documentation and help text to actually match effect of compact-source. Tested on x86_64-linux. 2023-05-10 GDB Administrator Automatic date update in version.in 2023-05-09 Dan Callaghan Support higher baud rates when they are defined On Linux at least, baud rate codes are defined up to B4000000. Allow the user to select them if they are present in the system headers. Change-Id: I393ff32e4a4b6127bdf97e3306ad5b6ebf7c934e 2023-05-09 Simon Marchi gdb: fix use-after-free in check_longjmp_breakpoint_for_call_dummy Commit 7a8de0c33019 ("Remove ALL_BREAKPOINTS_SAFE") introduced a use-after-free in the breakpoints iterations (see below for full ASan report). This makes gdb.base/stale-infcall.exp fail when GDB is build with ASan. check_longjmp_breakpoint_for_call_dummy iterates on all breakpoints, possibly deleting the current breakpoint as well as related breakpoints. The problem arises when a breakpoint in the B->related_breakpoint chain is also B->next. In that case, deleting that related breakpoint frees the breakpoint that all_breakpoints_safe has saved. The old code worked around that by manually changing B_TMP, which was the next breakpoint saved by the "safe iterator": while (b->related_breakpoint != b) { if (b_tmp == b->related_breakpoint) b_tmp = b->related_breakpoint->next; delete_breakpoint (b->related_breakpoint); } (Note that this seemed to assume that b->related_breakpoint->next was the same as b->next->next, not sure this is guaranteed.) The new code kept the B_TMP variable, but it's not useful in that context. We can't go change the next breakpoint as saved by the safe iterator, like we did before. I suggest fixing that by saving the breakpoints to delete in a map and deleting them all at the end. Here's the full ASan report: (gdb) PASS: gdb.base/stale-infcall.exp: continue to breakpoint: break-run1 print infcall () ================================================================= ==47472==ERROR: AddressSanitizer: heap-use-after-free on address 0x611000034980 at pc 0x563f7012c7bc bp 0x7ffdf3804d70 sp 0x7ffdf3804d60 READ of size 8 at 0x611000034980 thread T0 #0 0x563f7012c7bb in next_iterator::operator++() /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/next-iterator.h:66 #1 0x563f702ce8c0 in basic_safe_iterator >::operator++() /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/safe-iterator.h:84 #2 0x563f7021522a in check_longjmp_breakpoint_for_call_dummy(thread_info*) /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:7611 #3 0x563f714567b1 in process_event_stop_test /home/smarchi/src/binutils-gdb/gdb/infrun.c:6881 #4 0x563f71454e07 in handle_signal_stop /home/smarchi/src/binutils-gdb/gdb/infrun.c:6769 #5 0x563f7144b680 in handle_inferior_event /home/smarchi/src/binutils-gdb/gdb/infrun.c:6023 #6 0x563f71436165 in fetch_inferior_event() /home/smarchi/src/binutils-gdb/gdb/infrun.c:4387 #7 0x563f7136ff51 in inferior_event_handler(inferior_event_type) /home/smarchi/src/binutils-gdb/gdb/inf-loop.c:42 #8 0x563f7168038d in handle_target_event /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:4219 #9 0x563f72fccb6d in handle_file_event /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:573 #10 0x563f72fcd503 in gdb_wait_for_event /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:694 #11 0x563f72fcaf2b in gdb_do_one_event(int) /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:217 #12 0x563f7262b9bb in wait_sync_command_done() /home/smarchi/src/binutils-gdb/gdb/top.c:426 #13 0x563f7137a7c3 in run_inferior_call /home/smarchi/src/binutils-gdb/gdb/infcall.c:650 #14 0x563f71381295 in call_function_by_hand_dummy(value*, type*, gdb::array_view, void (*)(void*, int), void*) /home/smarchi/src/binutils-gdb/gdb/infcall.c:1332 #15 0x563f7137c0e2 in call_function_by_hand(value*, type*, gdb::array_view) /home/smarchi/src/binutils-gdb/gdb/infcall.c:780 #16 0x563f70fe5960 in evaluate_subexp_do_call(expression*, noside, value*, gdb::array_view, char const*, type*) /home/smarchi/src/binutils-gdb/gdb/eval.c:649 #17 0x563f70fe6617 in expr::operation::evaluate_funcall(type*, expression*, noside, char const*, std::__debug::vector >, std::allocator > > > const&) /home/smarchi/src/binutils-gdb/gdb/eval.c:677 #18 0x563f6fd19668 in expr::operation::evaluate_funcall(type*, expression*, noside, std::__debug::vector >, std::allocator > > > const&) /home/smarchi/src/binutils-gdb/gdb/expression.h:136 #19 0x563f70fe6bba in expr::var_value_operation::evaluate_funcall(type*, expression*, noside, std::__debug::vector >, std::allocator > > > const&) /home/smarchi/src/binutils-gdb/gdb/eval.c:689 #20 0x563f704b71dc in expr::funcall_operation::evaluate(type*, expression*, noside) /home/smarchi/src/binutils-gdb/gdb/expop.h:2219 #21 0x563f70fe0f02 in expression::evaluate(type*, noside) /home/smarchi/src/binutils-gdb/gdb/eval.c:110 #22 0x563f71b1373e in process_print_command_args /home/smarchi/src/binutils-gdb/gdb/printcmd.c:1319 #23 0x563f71b1391b in print_command_1 /home/smarchi/src/binutils-gdb/gdb/printcmd.c:1332 #24 0x563f71b147ec in print_command /home/smarchi/src/binutils-gdb/gdb/printcmd.c:1465 #25 0x563f706029b8 in do_simple_func /home/smarchi/src/binutils-gdb/gdb/cli/cli-decode.c:95 #26 0x563f7061972a in cmd_func(cmd_list_element*, char const*, int) /home/smarchi/src/binutils-gdb/gdb/cli/cli-decode.c:2735 #27 0x563f7262d0ef in execute_command(char const*, int) /home/smarchi/src/binutils-gdb/gdb/top.c:572 #28 0x563f7100ed9c in command_handler(char const*) /home/smarchi/src/binutils-gdb/gdb/event-top.c:543 #29 0x563f7101014b in command_line_handler(std::unique_ptr >&&) /home/smarchi/src/binutils-gdb/gdb/event-top.c:779 #30 0x563f72777942 in tui_command_line_handler /home/smarchi/src/binutils-gdb/gdb/tui/tui-interp.c:104 #31 0x563f7100d059 in gdb_rl_callback_handler /home/smarchi/src/binutils-gdb/gdb/event-top.c:250 #32 0x7f5a80418246 in rl_callback_read_char (/usr/lib/libreadline.so.8+0x3b246) (BuildId: 092e91fc4361b0ef94561e3ae03a75f69398acbb) #33 0x563f7100ca06 in gdb_rl_callback_read_char_wrapper_noexcept /home/smarchi/src/binutils-gdb/gdb/event-top.c:192 #34 0x563f7100cc5e in gdb_rl_callback_read_char_wrapper /home/smarchi/src/binutils-gdb/gdb/event-top.c:225 #35 0x563f728c70db in stdin_event_handler /home/smarchi/src/binutils-gdb/gdb/ui.c:155 #36 0x563f72fccb6d in handle_file_event /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:573 #37 0x563f72fcd503 in gdb_wait_for_event /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:694 #38 0x563f72fcb15c in gdb_do_one_event(int) /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:264 #39 0x563f7177ec1c in start_event_loop /home/smarchi/src/binutils-gdb/gdb/main.c:412 #40 0x563f7177f12e in captured_command_loop /home/smarchi/src/binutils-gdb/gdb/main.c:476 #41 0x563f717846e4 in captured_main /home/smarchi/src/binutils-gdb/gdb/main.c:1320 #42 0x563f71784821 in gdb_main(captured_main_args*) /home/smarchi/src/binutils-gdb/gdb/main.c:1339 #43 0x563f6fcedfbd in main /home/smarchi/src/binutils-gdb/gdb/gdb.c:32 #44 0x7f5a7e43984f (/usr/lib/libc.so.6+0x2384f) (BuildId: 2f005a79cd1a8e385972f5a102f16adba414d75e) #45 0x7f5a7e439909 in __libc_start_main (/usr/lib/libc.so.6+0x23909) (BuildId: 2f005a79cd1a8e385972f5a102f16adba414d75e) #46 0x563f6fcedd84 in _start (/home/smarchi/build/binutils-gdb/gdb/gdb+0xafb0d84) (BuildId: 50bd32e6e9d5e84543e9897b8faca34858ca3995) 0x611000034980 is located 0 bytes inside of 208-byte region [0x611000034980,0x611000034a50) freed by thread T0 here: #0 0x7f5a7fce312a in operator delete(void*, unsigned long) /usr/src/debug/gcc/gcc/libsanitizer/asan/asan_new_delete.cpp:164 #1 0x563f702bd1fa in momentary_breakpoint::~momentary_breakpoint() /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:304 #2 0x563f702771c5 in delete_breakpoint(breakpoint*) /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:12404 #3 0x563f702150a7 in check_longjmp_breakpoint_for_call_dummy(thread_info*) /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:7673 #4 0x563f714567b1 in process_event_stop_test /home/smarchi/src/binutils-gdb/gdb/infrun.c:6881 #5 0x563f71454e07 in handle_signal_stop /home/smarchi/src/binutils-gdb/gdb/infrun.c:6769 #6 0x563f7144b680 in handle_inferior_event /home/smarchi/src/binutils-gdb/gdb/infrun.c:6023 #7 0x563f71436165 in fetch_inferior_event() /home/smarchi/src/binutils-gdb/gdb/infrun.c:4387 #8 0x563f7136ff51 in inferior_event_handler(inferior_event_type) /home/smarchi/src/binutils-gdb/gdb/inf-loop.c:42 #9 0x563f7168038d in handle_target_event /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:4219 #10 0x563f72fccb6d in handle_file_event /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:573 #11 0x563f72fcd503 in gdb_wait_for_event /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:694 #12 0x563f72fcaf2b in gdb_do_one_event(int) /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:217 #13 0x563f7262b9bb in wait_sync_command_done() /home/smarchi/src/binutils-gdb/gdb/top.c:426 #14 0x563f7137a7c3 in run_inferior_call /home/smarchi/src/binutils-gdb/gdb/infcall.c:650 #15 0x563f71381295 in call_function_by_hand_dummy(value*, type*, gdb::array_view, void (*)(void*, int), void*) /home/smarchi/src/binutils-gdb/gdb/infcall.c:1332 #16 0x563f7137c0e2 in call_function_by_hand(value*, type*, gdb::array_view) /home/smarchi/src/binutils-gdb/gdb/infcall.c:780 #17 0x563f70fe5960 in evaluate_subexp_do_call(expression*, noside, value*, gdb::array_view, char const*, type*) /home/smarchi/src/binutils-gdb/gdb/eval.c:649 #18 0x563f70fe6617 in expr::operation::evaluate_funcall(type*, expression*, noside, char const*, std::__debug::vector >, std::allocator > > > const&) /home/smarchi/src/binutils-gdb/gdb/eval.c:677 #19 0x563f6fd19668 in expr::operation::evaluate_funcall(type*, expression*, noside, std::__debug::vector >, std::allocator > > > const&) /home/smarchi/src/binutils-gdb/gdb/expression.h:136 #20 0x563f70fe6bba in expr::var_value_operation::evaluate_funcall(type*, expression*, noside, std::__debug::vector >, std::allocator > > > const&) /home/smarchi/src/binutils-gdb/gdb/eval.c:689 #21 0x563f704b71dc in expr::funcall_operation::evaluate(type*, expression*, noside) /home/smarchi/src/binutils-gdb/gdb/expop.h:2219 #22 0x563f70fe0f02 in expression::evaluate(type*, noside) /home/smarchi/src/binutils-gdb/gdb/eval.c:110 #23 0x563f71b1373e in process_print_command_args /home/smarchi/src/binutils-gdb/gdb/printcmd.c:1319 #24 0x563f71b1391b in print_command_1 /home/smarchi/src/binutils-gdb/gdb/printcmd.c:1332 #25 0x563f71b147ec in print_command /home/smarchi/src/binutils-gdb/gdb/printcmd.c:1465 #26 0x563f706029b8 in do_simple_func /home/smarchi/src/binutils-gdb/gdb/cli/cli-decode.c:95 #27 0x563f7061972a in cmd_func(cmd_list_element*, char const*, int) /home/smarchi/src/binutils-gdb/gdb/cli/cli-decode.c:2735 #28 0x563f7262d0ef in execute_command(char const*, int) /home/smarchi/src/binutils-gdb/gdb/top.c:572 #29 0x563f7100ed9c in command_handler(char const*) /home/smarchi/src/binutils-gdb/gdb/event-top.c:543 previously allocated by thread T0 here: #0 0x7f5a7fce2012 in operator new(unsigned long) /usr/src/debug/gcc/gcc/libsanitizer/asan/asan_new_delete.cpp:95 #1 0x563f7029a9a3 in new_momentary_breakpoint /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:8129 #2 0x563f702212f6 in momentary_breakpoint_from_master /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:8169 #3 0x563f70212db1 in set_longjmp_breakpoint_for_call_dummy() /home/smarchi/src/binutils-gdb/gdb/breakpoint.c:7582 #4 0x563f713804db in call_function_by_hand_dummy(value*, type*, gdb::array_view, void (*)(void*, int), void*) /home/smarchi/src/binutils-gdb/gdb/infcall.c:1260 #5 0x563f7137c0e2 in call_function_by_hand(value*, type*, gdb::array_view) /home/smarchi/src/binutils-gdb/gdb/infcall.c:780 #6 0x563f70fe5960 in evaluate_subexp_do_call(expression*, noside, value*, gdb::array_view, char const*, type*) /home/smarchi/src/binutils-gdb/gdb/eval.c:649 #7 0x563f70fe6617 in expr::operation::evaluate_funcall(type*, expression*, noside, char const*, std::__debug::vector >, std::allocator > > > const&) /home/smarchi/src/binutils-gdb/gdb/eval.c:677 #8 0x563f6fd19668 in expr::operation::evaluate_funcall(type*, expression*, noside, std::__debug::vector >, std::allocator > > > const&) /home/smarchi/src/binutils-gdb/gdb/expression.h:136 #9 0x563f70fe6bba in expr::var_value_operation::evaluate_funcall(type*, expression*, noside, std::__debug::vector >, std::allocator > > > const&) /home/smarchi/src/binutils-gdb/gdb/eval.c:689 #10 0x563f704b71dc in expr::funcall_operation::evaluate(type*, expression*, noside) /home/smarchi/src/binutils-gdb/gdb/expop.h:2219 #11 0x563f70fe0f02 in expression::evaluate(type*, noside) /home/smarchi/src/binutils-gdb/gdb/eval.c:110 #12 0x563f71b1373e in process_print_command_args /home/smarchi/src/binutils-gdb/gdb/printcmd.c:1319 #13 0x563f71b1391b in print_command_1 /home/smarchi/src/binutils-gdb/gdb/printcmd.c:1332 #14 0x563f71b147ec in print_command /home/smarchi/src/binutils-gdb/gdb/printcmd.c:1465 #15 0x563f706029b8 in do_simple_func /home/smarchi/src/binutils-gdb/gdb/cli/cli-decode.c:95 #16 0x563f7061972a in cmd_func(cmd_list_element*, char const*, int) /home/smarchi/src/binutils-gdb/gdb/cli/cli-decode.c:2735 #17 0x563f7262d0ef in execute_command(char const*, int) /home/smarchi/src/binutils-gdb/gdb/top.c:572 #18 0x563f7100ed9c in command_handler(char const*) /home/smarchi/src/binutils-gdb/gdb/event-top.c:543 #19 0x563f7101014b in command_line_handler(std::unique_ptr >&&) /home/smarchi/src/binutils-gdb/gdb/event-top.c:779 #20 0x563f72777942 in tui_command_line_handler /home/smarchi/src/binutils-gdb/gdb/tui/tui-interp.c:104 #21 0x563f7100d059 in gdb_rl_callback_handler /home/smarchi/src/binutils-gdb/gdb/event-top.c:250 #22 0x7f5a80418246 in rl_callback_read_char (/usr/lib/libreadline.so.8+0x3b246) (BuildId: 092e91fc4361b0ef94561e3ae03a75f69398acbb) Change-Id: Id00c17ab677f847fbf4efdf0f4038373668d3d88 Approved-By: Tom Tromey 2023-05-09 Enze Li Correct a spelling mistake in the binutils README file. 2023-05-09 Alan Modra stack overflow in debug_write_type Another fuzzer attack. This one was a "set" with elements using an indirect type pointing back at the set. The existing recursion check only prevented simple recursion. * debug.c (struct debug_type_s): Add mark. (debug_write_type): Set mark and check before recursing into indirect types. 2023-05-09 Alan Modra alpha-vms reloc sanity check Stops fuzzed files triggering reads past the end of the reloc buffer. * vms-alpha.c (alpha_vms_slurp_relocs): Sanity check reloc records. 2023-05-09 Alan Modra regen ld/Makefile.in 2023-05-09 GDB Administrator Automatic date update in version.in 2023-05-08 John Baldwin gdbserver: Clear upper ZMM registers in the right location. This was previously clearing the upper 32 bytes of ZMM0-15 rather than ZMM16-31. Approved-By: Simon Marchi 2023-05-08 John Baldwin x86-fbsd-nat: Add missing public label. These two methods are both overrides of public methods in base classes. 2023-05-08 Felix Willgerodt gdb: Avoid warning for the jump command inside an inline function. When stopped inside an inline function, trying to jump to a different line of the same function currently results in a warning about jumping to another function. Fix this by taking inline functions into account. Before: Breakpoint 1, function_inline (x=510) at jump-inline.cpp:22 22 a = a + x; /* inline-funct */ (gdb) j 21 Line 21 is not in `function_inline(int)'. Jump anyway? (y or n) After: Breakpoint 2, function_inline (x=510) at jump-inline.cpp:22 22 a = a + x; /* inline-funct */ (gdb) j 21 Continuing at 0x400679. Breakpoint 1, function_inline (x=510) at jump-inline.cpp:21 21 a += 1020 + a; /* increment-funct */ This was regression-tested on X86-64 Linux. Co-Authored-by: Cristian Sandu Approved-By: Andrew Burgess 2023-05-08 Alan Modra pe.em and pep.em make_import_fixup This is a little cleanup that I made when looking at pr30343 that makes it more obvious that make_import_fixup in both files are identical (and in fact the new pep.em read_addend could be used in both files). * emultempl/pep.em (read_addend): Extract from.. (make_import_fixup): ..here. * emultempl/pe.em (read_addend): Similarly. (make_import_fixup): Similarly. Add debug code from pep.em. 2023-05-08 Alan Modra PR30343, LTO ignores linker reference to _pei386_runtime_relocator Make a reference to _pei386_runtime_relocator before LTO recompilation. This is done regardless of whether such a reference will be used, because it can't be known whether it is needed before LTO. I also found it necessary to enable long section names for the bfd created in make_runtime_pseudo_reloc, because otherwise when writing it out to the bfd-in-memory we get the section written as .rdata_r which when read back in leads to a linker warning ".rdata_r: section below image base" and likely runtime misbehaviour. PR 30343 * emultempl/pe.em (make_runtime_ref): New function. (gld${EMULATION_NAME}_before_plugin_all_symbols_read): New function. (LDEMUL_BEFORE_PLUGIN_ALL_SYMBOLS_READ): Define. * emultempl/pep.em: Similarly to pe.em. * pe-dll.c (make_runtime_pseudo_reloc): Set long section names. 2023-05-08 GDB Administrator Automatic date update in version.in 2023-05-07 Tom Tromey Remove parameter from select_source_symtab I noticed that select_source_symtab is only ever called with nullptr as an argument, so this patch removes the parameter and associated logic. Reviewed-By: Bruno Larsen 2023-05-07 Tom Tromey Remove ALL_BREAKPOINTS_SAFE There's just a single remaining use of the ALL_BREAKPOINTS_SAFE macro; this patch replaces it with a for-each and an explicit temporary variable. Remove ALL_DICT_SYMBOLS This replaces ALL_DICT_SYMBOLS with an iterator so that for-each can be used. Remove ALL_OBJFILE_OSECTIONS This replaces ALL_OBJFILE_OSECTIONS with an iterator so that for-each can be used. Rename objfile::sections I think objfile::sections makes sense as the name of the method to iterate over an objfile's sections, so this patch renames the existing field to objfile::sections_start in preparation for that. 2023-05-07 GDB Administrator Automatic date update in version.in 2023-05-06 Tom Tromey Allow pretty-print of static members Python pretty-printers haven't applied to static members for quite some time. I tracked this down to the call to cp_print_value_fields in cp_print_static_field -- it doesn't let pretty-printers have a chance to print the value. This patch fixes the problem. The way that static members are handled is very weird to me. I tend to think this should be done more globally, like in value_print. However, I haven't made any big change. Reviewed-by: Keith Seitz Tested-by: Keith Seitz Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30057 2023-05-06 YunQiang Su gas: documents .gnu_attribute Tag_GNU_MIPS_ABI_MSA It is added since 2016 by Add support for .MIPS.abiflags and .gnu.attributes sections b52717c0e104eb603e8189c3c0d3658ef5d903f5 But never documented. 2023-05-06 GDB Administrator Automatic date update in version.in 2023-05-05 Tom Tromey Filter out types from DAP scopes request The DAP scopes request examines the symbols in a block tree, but neglects to omit types. This patch fixes the problem. 2023-05-05 Tom Tromey Use discrete_position in ada-valprint.c I found a couple of spots in ada-valprint.c that use an explicit loop, but where discrete_position could be used instead. Reviewed-by: Keith Seitz 2023-05-05 Andrew Burgess gdb/python: add mechanism to manage Python initialization functions Currently, when we add a new python sub-system to GDB, e.g. py-inferior.c, we end up having to create a new function like gdbpy_initialize_inferior, which then has to be called from the function do_start_initialization in python.c. In some cases (py-micmd.c and py-tui.c), we have two functions gdbpy_initialize_*, and gdbpy_finalize_*, with the second being called from finalize_python which is also in python.c. This commit proposes a mechanism to manage these initialization and finalization calls, this means that adding a new Python subsystem will no longer require changes to python.c or python-internal.h, instead, the initialization and finalization functions will be registered directly from the sub-system file, e.g. py-inferior.c, or py-micmd.c. The initialization and finalization functions are managed through a new class gdbpy_initialize_file in python-internal.h. This class contains a single global vector of all the initialization and finalization functions. In each Python sub-system we create a new gdbpy_initialize_file object, the object constructor takes care of registering the two callback functions. Now from python.c we can call static functions on the gdbpy_initialize_file class which take care of walking the callback list and invoking each callback in turn. To slightly simplify the Python sub-system files I added a new macro GDBPY_INITIALIZE_FILE, which hides the need to create an object. We can now just do this: GDBPY_INITIALIZE_FILE (gdbpy_initialize_registers); One possible problem with this change is that there is now no guaranteed ordering of how the various sub-systems are initialized (or finalized). To try and avoid dependencies creeping in I have added a use of the environment variable GDB_REVERSE_INIT_FUNCTIONS, this is the same environment variable used in the generated init.c file. Just like with init.c, when this environment variable is set we reverse the list of Python initialization (and finalization) functions. As there is already a test that starts GDB with the environment variable set then this should offer some level of protection against dependencies creeping in - though for full protection I guess we'd need to run all gdb.python/*.exp tests with the variable set. I have tested this patch with the environment variable set, and saw no regressions, so I think we are fine right now. One other change of note was for gdbpy_initialize_gdb_readline, this function previously returned void. In order to make this function have the correct signature I've updated its return type to int, and we now return 0 to indicate success. All of the other initialize (and finalize) functions have been made static within their respective sub-system files. There should be no user visible changes after this commit. 2023-05-05 Andrew Burgess gdb/testsuite: more newline pattern cleanup After this commit: commit e2f620135d92f7cd670af4e524fffec7ac307666 Date: Thu Mar 30 13:26:25 2023 +0100 gdb/testsuite: change newline patterns used in gdb_test It was pointed out in PR gdb/30403 that the same patterns can be found in other lib/gdb.exp procs and that it would probably be a good idea if these procs remained in sync with gdb_test. Actually, the bug specifically calls out gdb_test_multiple when using with '-wrap', but I found a couple of other locations in gdb_continue_to_breakpoint, gdb_test_multiline, get_valueof, and get_local_valueof. In all these locations one or both of the following issues are addressed: 1. A leading pattern of '[\r\n]*' is pointless. If there is a newline it will be matched, but if there is not then the testsuite doesn't care. Also, as expect is happy to skip non-matched output at the start of a pattern, if there is a newline expect is happy to skip over it before matching the rest. As such, this leading pattern is removed. 2. Using '\[\r\n\]*$gdb_prompt' means that we will swallow unexpected blank lines at the end of a command's output, but also, if the pattern from the test script ends with a '\r', '\n', or '.' then these will partially match the trailing newline, with the remainder of the newline matched by the pattern from gdb.exp. This split matching doesn't add any value, it's just something that has appeared as a consequence of how gdb.exp was originally written. In this case the '\[\r\n\]*' is replaced with '\r\n'. I've rerun the testsuite and fixed the regressions that I saw, these were places where GDB emits a blank line at the end of the command output, which we now need to explicitly match in the test script, this was for: gdb.dwarf2/dw2-out-of-range-end-of-seq.exp gdb.guile/guile.exp gdb.python/python.exp Or a location where the test script was matching part of the newline sequence, while gdb.exp was previously matching the remainder of the newline sequence. Now we rely on gdb.exp to match the complete newline sequence, this was for: gdb.base/commands.exp Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30403 2023-05-05 Tom de Vries [gdb/testsuite] Generate long string in gdb.base/page.exp I noticed in gdb.base/page.exp: ... set fours [string repeat 4 40] ... but then shortly afterwards: ... [list 1\r\n 2\r\n 3\r\n 444444444444444444444444444444] ... Summarize the long string in the same way using string repeat: ... [list 1\r\n 2\r\n 3\r\n [string repeat 4 30]] ... Tested on x86_64-linux. 2023-05-05 Andrew Burgess gdb/testsuite: tighten patterns in build-id-no-debug-warning.exp Tighten the expected output pattern in the test script: gdb.debuginfod/build-id-no-debug-warning.exp While working on some other patch I broke GDB such that this warning: warning: "FILENAME": separate debug info file has no debug info (which is generated in build-id.c) didn't actually include the FILENAME any more -- yet this test script continued to pass. It turns out that this script doesn't actually check for FILENAME. This commit extends the test pattern to check for the full warning string, including FILENAME, and also removes some uses of '.*' to make the test stricter. 2023-05-05 Tom Tromey Simplify decode_locdesc While looking into another bug, I noticed that the DWARF cooked indexer picks up an address for this symbol: <1><82>: Abbrev Number: 2 (DW_TAG_variable) <83> DW_AT_specification: <0x9f> <87> DW_AT_location : 10 byte block: e 0 0 0 0 0 0 0 0 e0 (DW_OP_const8u: 0 0; DW_OP_GNU_push_tls_address or DW_OP_HP_unknown) <92> DW_AT_linkage_name: (indirect string, offset: 0x156): _ZN9container8tlsvar_0E This happens because decode_locdesc allows the use of DW_OP_GNU_push_tls_address. This didn't make sense to me. I looked into it a bit more, and I think decode_locdesc is used in three ways: 1. Find a constant address of a symbol that happens to be encoded as a location expression. 2. Find the offset of a function in a virtual table. (This one should probably be replaced by code to just evaluate the expression in gnu-v3-abi.c -- but there's no point yet because no compiler actually seems to emit correct DWARF here, see the bug linked in the patch.) 3. Find the offset of a field, if the offset is a constant. None of these require TLS. This patch simplifies decode_locdesc by removing any opcodes that don't fit into the above. It also changes the API a little, to make it less difficult to use. Regression tested on x86-64 Fedora 36. 2023-05-05 Tom Tromey Simplify auto_load_expand_dir_vars and remove substitute_path_component This simplifies auto_load_expand_dir_vars to first split the string, then do any needed substitutions. This was suggested by Simon, and is much simpler than the current approach. Then this patch also removes substitute_path_component, as it is no longer called. This is nice because it helps with the long term goal of removing utils.h. Regression tested on x86-64 Fedora 36. 2023-05-05 Tom de Vries [gdb/testsuite] Add gdb.base/wrap-line.exp Add a test-case that tests prompt edit wrapping in CLI, both for TERM=xterm and TERM=ansi, both with auto-detected and hard-coded width. In the TERM=ansi case with auto-detected width we run into PR cli/30346, so add a KFAIL for that failure mode. Tested on x86_64-linux. 2023-05-05 Tom de Vries [gdb/testsuite] Add gdb.tui/wrap-line.exp Add a test-case that tests prompt edit wrapping behaviour in the tuiterm, both for CLI and TUI, both with auto-detected and hard-coded width. In the CLI case with auto-detected width we run into PR cli/30411, so add a KFAIL for that failure mode. Tested on x86_64-linux. 2023-05-05 Nick Clifton Debug info is lost for functions only called from functions marked with cmse_nonsecure_entr PR 30354 * elf32-arm.c (elf32_arm_gc_mark_extra_sections): If any debug sections are marked then rerun the extra marking in order to pick up any dependencies. 2023-05-05 GDB Administrator Automatic date update in version.in 2023-05-04 Bruno Larsen Revert "gdb/testsuite: add KFAILs to gdb.reverse/step-reverse.exp" This reverts commit 476410b3bca1389ee69e9c8fa18aaee16793a56d. One of Simon's recent commits (2a740b3ba4c9f39c86dd75e0914ee00942cab471) changed the way recording a remote target works and fixed the underlying issue of the bug, so the KFails can be removed from the test. Approved-By: Tom Tromey 2023-05-04 Gareth Rees Don't treat references to compound values as "simple". SUMMARY The '--simple-values' argument to '-stack-list-arguments' and similar GDB/MI commands does not take reference types into account, so that references to arbitrarily large structures are considered "simple" and printed. This means that the '--simple-values' argument cannot be used by IDEs when tracing the stack due to the time taken to print large structures passed by reference. DETAILS Various GDB/MI commands ('-stack-list-arguments', '-stack-list-locals', '-stack-list-variables' and so on) take a PRINT-VALUES argument which may be '--no-values' (0), '--all-values' (1) or '--simple-values' (2). In the '--simple-values' case, the command is supposed to print the name, type, and value of variables with simple types, and print only the name and type of variables with compound types. The '--simple-values' argument ought to be suitable for IDEs that need to update their user interface with the program's call stack every time the program stops. However, it does not take C++ reference types into account, and this makes the argument unsuitable for this purpose. For example, consider the following C++ program: struct s { int v[10]; }; int sum(const struct s &s) { int total = 0; for (int i = 0; i < 10; ++i) total += s.v[i]; return total; } int main(void) { struct s s = { { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 } }; return sum(s); } If we start GDB in MI mode and continue to 'sum', the behaviour of '-stack-list-arguments' is as follows: (gdb) -stack-list-arguments --simple-values ^done,stack-args=[frame={level="0",args=[{name="s",type="const s &",value="@0x7fffffffe310: {v = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10}}"}]},frame={level="1",args=[]}] Note that the value of the argument 's' was printed, even though 's' is a reference to a structure, which is not a simple value. See https://github.com/microsoft/MIEngine/pull/673 for a case where this behaviour caused Microsoft to avoid the use of '--simple-values' in their MIEngine debug adapter, because it caused Visual Studio Code to take too long to refresh the call stack in the user interface. SOLUTIONS There are two ways we could fix this problem, depending on whether we consider the current behaviour to be a bug. 1. If the current behaviour is a bug, then we can update the behaviour of '--simple-values' so that it takes reference types into account: that is, a value is simple if it is neither an array, struct, or union, nor a reference to an array, struct or union. In this case we must add a feature to the '-list-features' command so that IDEs can detect that it is safe to use the '--simple-values' argument when refreshing the call stack. 2. If the current behaviour is not a bug, then we can add a new option for the PRINT-VALUES argument, for example, '--scalar-values' (3), that would be suitable for use by IDEs. In this case we must add a feature to the '-list-features' command so that IDEs can detect that the '--scalar-values' argument is available for use when refreshing the call stack. PATCH This patch implements solution (1) as I think the current behaviour of not printing structures, but printing references to structures, is contrary to reasonable expectation. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29554 2023-05-04 Nick Clifton Stop the linker from loosing the entry point for COFF/PE code when compiling with LTO enabled. PR 30300 * emultempl/pep.em (set_entry_point): Add an undefined reference to the entry point if it has been constructed heuristically. * emultempl/pe.em (set_entry_point): Likewise. 2023-05-04 Dimitar Dimitrov ld: pru: Place exception-handling sections correctly * scripttempl/pru.sc (OUTPUT_SECTION_ALIGN): New helper variable to place at end of DMEM output sections. (.data): Use the helper variable. (.eh_frame): New output section. (.gnu_extab): Ditto. (.gcc_except_table): Ditto. (.resource_table): Use the helper variable. 2023-05-04 Jan Beulich RISC-V: tighten post-relocation-operator separator expectation As per the spec merely a blank isn't okay as a separator, the operand to the relocation function ought to be parenthesized. Enforcing this then also eliminates an inconsistency in that lui t0, %hi sym lui t0, %hi 0x1000 were accepted, but lui t0, %hi +sym lui t0, %hi -0x1000 were not. 2023-05-04 Ilya Leoshkevich gas: fix building tc-bpf.c on s390x char is unsigned on s390x, so there are a lot of warnings like: gas/config/tc-bpf.c: In function 'get_token': gas/config/tc-bpf.c:900:14: error: comparison is always false due to limited range of data type [-Werror=type-limits] 900 | if (ch == EOF || len > MAX_TOKEN_SZ) | ^~ Change its type to int, like in the other similar code. There is also: gas/config/tc-bpf.c:735:30: error: 'bpf_endianness' may be used uninitialized in this function [-Werror=maybe-uninitialized] 735 | dst, be ? size[endianness - BPF_BE16] : size[endianness - BPF_LE16]); | ~~~~~~~~~~~^~~~~~~~~~ -Wmaybe-uninitialized doesn't seem to understand the FSM; just initialize bpf_endianness to silence it. Add an assertion to build_bpf_endianness() in order to catch potential bugs. 2023-05-04 YunQiang Su MIPS: revert "default r6 if vendor is img" In commit: 9171de358f230b64646bbb525a74e5f8e3dbe0dc, The default output is set to r6 if the vendor is img, It is ugly and should not be in upstream. Let's revert it. 2023-05-04 GDB Administrator Automatic date update in version.in 2023-05-03 Tom de Vries [gdb/build] Fix frame_list position in frame.c In commit 995a34b1772 ("Guard against frame.c destructors running before frame-info.c's") the following problem was addressed. The frame_info_ptr destructor: ... ~frame_info_ptr () { frame_list.erase (frame_list.iterator_to (*this)); } ... uses frame_list, which is a static member of class frame_info_ptr, instantiated in frame-info.c: ... intrusive_list frame_info_ptr::frame_list; ... Then there's a static frame_info_pointer variable named selected_frame in frame.c: ... static frame_info_ptr selected_frame; ... Because the destructor of selected_frame uses frame_list, its destructor needs to be called before the destructor of frame_list. But because they're in different compilation units, the initialization order and consequently destruction order is not guarantueed. The commit fixed this by handling the case that the destructor of frame_list is called first, adding a check on is_linked (): ... ~frame_info_ptr () { - frame_list.erase (frame_list.iterator_to (*this)); + /* If this node has static storage, it may be deleted after + frame_list. Attempting to erase ourselves would then trigger + internal errors, so make sure we are still linked first. */ + if (is_linked ()) + frame_list.erase (frame_list.iterator_to (*this)); } ... However, since then frame_list has been moved into frame.c, and initialization/destruction order is guarantueed inside a compilation unit. Revert aforementioned commit, and fix the destruction order problem by moving frame_list before selected_frame. Reverting the commit is another way of fixing the already fixed Wdangling-pointer warning reported in PR build/30413, in a different way than commit 9b0ccb1ebae ("Pass const frame_info_ptr reference for skip_[language_]trampoline"). Approved-By: Simon Marchi Tested on x86_64-linux. PR build/30413 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30413 2023-05-03 Lancelot SIX gdb/show_args_command: print to the ui_file argument The show_args_command uses gdb_printf without specifying the ui_file. This means that it prints to gdb_stdout instead of the stream given as an argument to the function. This commit fixes this. Reviewed-By: Tom Tromey 2023-05-03 Oleg Tolmatcev Make ar faster * archive.c (_bfd_write_archive_contents): Use a larger buffer in order to improve efficiency. 2023-05-03 Mark Wielaard Pass const frame_info_ptr reference for skip_[language_]trampoline g++ 13.1.1 produces a -Werror=dangling-pointer= In file included from ../../binutils-gdb/gdb/frame.h:75, from ../../binutils-gdb/gdb/symtab.h:40, from ../../binutils-gdb/gdb/language.c:33: In member function ‘void intrusive_list::push_empty(T&) [with T = frame_info_ptr; AsNode = intrusive_base_node]’, inlined from ‘void intrusive_list::push_back(reference) [with T = frame_info_ptr; AsNode = intrusive_base_node]’ at gdbsupport/intrusive_list.h:332:24, inlined from ‘frame_info_ptr::frame_info_ptr(const frame_info_ptr&)’ at gdb/frame.h:241:26, inlined from ‘CORE_ADDR skip_language_trampoline(frame_info_ptr, CORE_ADDR)’ at gdb/language.c:530:49: gdbsupport/intrusive_list.h:415:12: error: storing the address of local variable ‘’ in ‘frame_info_ptr::frame_list.intrusive_list::m_back’ [-Werror=dangling-pointer=] 415 | m_back = &elem; | ~~~~~~~^~~~~~~ gdb/language.c: In function ‘CORE_ADDR skip_language_trampoline(frame_info_ptr, CORE_ADDR)’: gdb/language.c:530:49: note: ‘’ declared here 530 | CORE_ADDR real_pc = lang->skip_trampoline (frame, pc); | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~ gdb/frame.h:359:41: note: ‘frame_info_ptr::frame_list’ declared here 359 | static intrusive_list frame_list; | ^~~~~~~~~~ Each new frame_info_ptr is being pushed on a static frame list and g++ cannot see why that is safe in case the frame_info_ptr is created and destroyed immediately when passed as value. It isn't clear why only in this one place g++ sees the issue (probably because it can inline enough code in this specific case). Since passing the frame_info_ptr as const reference is cheaper, use that as workaround for this warning. PR build/30413 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30413 Tested-by: Kevin Buettner Reviewed-by: Kevin Buettner Reviewed-by: Tom Tromey 2023-05-03 Oleg Tolmatcev Improve the speed of computing checksums for COFF binaries. * coffcode.h (coff_read_word_from_buffer): New function. * coffcode.h (COFF_CHECKSUM_BUFFER_SIZE): New constant. * coffcode.h (coff_compute_checksum): Improve speed by reducing the number of seeks and reads used. 2023-05-03 Alan Modra Remove unused args from bfd_make_debug_symbol The ptr and size args are unused. Make the function look the same as bfd_make_empty_symbol. Generated docs and include files bfd/doc/chew.c extracts documentation from source code comments annotated with keywords, and generates much of bfd.h and libbfd.h from those same comments. The docs have suffered from people (me too) adding things like CODE_FRAGMENT to the source to put code into bfd.h without realising that CODE_FRAGMENT also puts @example around said code into the docs. So we have random senseless things in the docs. This patch fixes that problem (well, the senseless things from CODE_FRAGMENT), moves most of the code out of bfd-in.h, and improves a few chew.c features. libbfd.h now automatically gets ATTRIBUTE_HIDDEN prototypes, and indentation in bfd.h and libbfd.h is better. 2023-05-03 Alan Modra Move bfd_alloc, bfd_zalloc and bfd_release to libbfd.c These functions don't belong in opncls.c. * libbfd-in.h (bfd_release): Delete prototype. * opncls.c (bfd_alloc, bfd_zalloc, bfd_release): Move to.. * libbfd.c: ..here. Include objalloc.c and provide bfd_release with a FUNCTION comment. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. 2023-05-03 Alan Modra Move bfd_elf_bfd_from_remote_memory to opncls.c bfd_elf_bfd_from_remote_memory is just a wrapper, and the function could be implemented for other formats. Move it to opncls.c because it acts a little like some of the other bfd_open* routines. Also give it the usual FUNCTION etc. comment so prototypes and docs are handled automatically. * elf.c (bfd_elf_bfd_from_remote_memory): Move to.. * opncls.c: ..here, add FUNCTION comment. * bfd-in.h (bfd_elf_bfd_from_remote_memory): Delete prototype. * bfd-in2.h: Regenerate. 2023-05-03 Alan Modra hash.c: replace some unsigned long with unsigned int * hash.c (higher_prime_number): Use uint32_t param, return value, tables and variables. (bfd_default_hash_table_size): Make it an unsigned int. (bfd_hash_set_default_size): Use unsigned int param and return. * bfd-in.h (bfd_hash_set_default_size): Update prototype. * bfd-in2.h: Regenerate. libbfc.c: Use stdint types for unsigned char and unsigned long * libbfd.c (bfd_put_8): Use bfd_byte rather than unsigned char. (bfd_get_8, bfd_get_signed_8): Likewise. (_bfd_read_unsigned_leb128, _bfd_safe_read_leb128): Likewise. (_bfd_read_signed_leb128): Likewise. (bfd_getb24, bfd_getl24): Replace unsigned long with uint32_t. (bfd_getb32, bfd_getl32): Likewise. (bfd_getb_signed_32, bfd_getl_signed_32): Likewise. 2023-05-03 Alan Modra Change signature of bfd crc functions The crc calculated is 32 bits. Replace uses of unsigned long with uint32_t. Also use bfd_byte* for buffers. bfd/ * opncls.c (bfd_calc_gnu_debuglink_crc32): Use stdint types. (bfd_get_debug_link_info_1, bfd_get_debug_link_info): Likewise. (separate_debug_file_exists, bfd_follow_gnu_debuglink): Likewise. (bfd_fill_in_gnu_debuglink_section): Likewise. * bfd-in2.h: Regenerate. gdb/ * auto-load.c (auto_load_objfile_script): Update type of bfd_get_debug_link_info argument. * symfile.c (find_separate_debug_file_by_debuglink): Likewise. * gdb_bfd.c (get_file_crc): Update type of bfd_calc_gnu_debuglink_crc32 argument. 2023-05-03 Alan Modra _bfd_mips_elf_lo16_reloc vallo comment This explains exactly why the high reloc adjustment is as it is, replacing the rather nebulous existing comment. I've also changed the expression from (lo+0x8000)&0xffff to (lo&0xffff)^0x8000 which better matches part of the standard 16-bit sign extension (resulting in exactly the same value), and hoisted the calculation out of the loop. * elfxx-mips.c (_bfd_mips_elf_lo16_reloc): Expand vallo comment. Hoist calculation out of loop. 2023-05-02 Alexandra Hájková gdb.base/watchpoint-unaligned.exp: Always initialize wpoffset_to_wpnum Initialize wpoffset_to_wpnumto avoid TCL error which happens in some aarch64 types. ERROR: in testcase /root/build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.base/watchpoint-unaligned.exp ERROR: can't read "wpoffset_to_wpnum(1)": no such element in array ERROR: tcl error code TCL READ VARNAME ERROR: tcl error info: can't read "wpoffset_to_wpnum(1)": no such element in array while executing Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30340 Reviewed-by: Luis Machado Reviewed-By: Andrew Burgess 2023-05-02 Mark Wielaard xcoffread.c: Fix -Werror=dangling-pointer= issue with main_subfile. GCC 13 points out that main_subfile has local function scope, but a pointer to it is assigned to the global inclTable array subfile element field: In function ‘void process_linenos(CORE_ADDR, CORE_ADDR)’, inlined from ‘void aix_process_linenos(objfile*)’ at xcoffread.c:727:19, inlined from ‘void aix_process_linenos(objfile*)’ at xcoffread.c:720:1: xcoffread.c:629:37: error: storing the address of local variable ‘main_subfile’ in ‘*inclTable.19_45 + _28._inclTable::subfile’ [-Werror=dangling-pointer=] 629 | inclTable[ii].subfile = &main_subfile; | ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~ xcoffread.c: In function ‘void aix_process_linenos(objfile*)’: xcoffread.c:579:18: note: ‘main_subfile’ declared here 579 | struct subfile main_subfile; | ^~~~~~~~~~~~ xcoffread.c:496:19: note: ‘inclTable’ declared here 496 | static InclTable *inclTable; /* global include table */ | ^~~~~~~~~ Fix this by making main_subfile file static. And allocate and deallocated together with inclTable in allocate_include_entry and xcoff_symfile_finish. Adjust the use of main_subfile in process_linenos to take a pointer to the subfile. 2023-05-02 Tom de Vries [gdb/testsuite] Use set in lmap in gdb.dwarf2/dw2-abs-hi-pc.exp In gdb.dwarf2/dw2-abs-hi-pc.exp we do: ... set sources [lmap i $sources { expr { "$srcdir/$subdir/$i" } }] ... The use of expr is not idiomatic. Fix this by using set instead: ... set sources [lmap i $sources { set tmp $srcdir/$subdir/$i }] ... Reported-By: Tom Tromey Reviewed-By: Andreas Schwab 2023-05-02 Aditya Kamath Fix Assertion pid != 0 failure in AIX. In AIX if there is a main and a thread created from it , then once the program completed execution and goes to pd_disable () inferior_ptid had pid 0 leading to an assertion failure while finding the thread's data in aix-thread.c file. This patch is a fix for the same. 2023-05-02 Tom Tromey Remove error_stream error_stream is trivial and only used in a couple of spots in breakpoint.c. This patch removes it in favor of just writing it out at the spots where it was used. 2023-05-02 Nick Clifton Remove Dimity Diky as MSP430 maintainer. 2023-05-02 Andrew Burgess gdb/testsuite: compile gdb.linespec/cp-completion-aliases.exp as C++ Noticed in passing that the prepare_for_testing call in gdb.linespec/cp-completion-aliases.exp does not pass the 'c++' flag, despite this being a C++ test. I guess, as the source file has the '.cc' extension, all the compilers are doing the right thing anyway -- the source file uses templates, so is definitely being compiled as C++. I noticed this when I tried to set CXX_FOR_TARGET (but not CC_FOR_TARGET) and spotted that this script was still using the C compiler. Fixed in this commit by adding the 'c++' flag for prepare_for_testing. 2023-05-02 GDB Administrator Automatic date update in version.in 2023-05-01 Tom Tromey Document DAP 'launch' parameter The Debugger Adapter Protocol defines a "launch" request but leaves the parameters up to the implementation: Since launching is debugger/runtime specific, the arguments for this request are not part of this specification. This patch adds some documentation for the parameter GDB currently defines. Note that I plan to add more parameters here, and perhaps there will be other extensions in time as well. Reviewed-By: Eli Zaretskii 2023-05-01 Simon Marchi gdb: remove ui_interp_info I don't think that having struct ui_interp_info separated from struct ui is very useful. As of today, it looks like an unnecessary indirection layer. Move the contents of ui_interp_info directly into struct ui, and update all users. Change-Id: I817ba6e047dbcc4ba15b666af184b40bfed7e521 2023-05-01 Simon Marchi gdb: store interps in an intrusive_list Use intrusive_list, instead of hand-made linked list. Change-Id: Idc857b40dfa3e3c35671045898331cca2c928097 2023-05-01 Simon Marchi gdb: move struct ui and related things to ui.{c,h} I'd like to move some things so they become methods on struct ui. But first, I think that struct ui and the related things are big enough to deserve their own file, instead of being scattered through top.{c,h} and event-top.c. Change-Id: I15594269ace61fd76ef80a7b58f51ff3ab6979bc 2023-05-01 Tom Tromey Turn set_inferior_args_vector into method of inferior This patch turns set_inferior_args_vector into an overload of inferior::set_args. Regression tested on x86-64 Fedora 36. 2023-05-01 Tom Tromey Remove evaluate_type Like evaluate_expression, evaluate_type is also just a simple wrapper. Removing it makes the code a little nicer. Remove evaluate_expression evaluate_expression is just a little wrapper for a method on expression. Removing it also removes a lot of ugly (IMO) calls to get(). Remove op_name op_name is only needed in a single place, so remove it and inline it there. 2023-05-01 Tom Tromey Fix crash in Rust expression parser A user found that an array expression with just a single value (like "[23]") caused the Rust expression parser to crash. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30410 2023-05-01 Tom Tromey Replace field_is_static with a method This changes field_is_static to be a method on struct field, and updates all the callers. Most of this patch was written by script. Regression tested on x86-64 Fedora 36. 2023-05-01 GDB Administrator Automatic date update in version.in 2023-04-30 Tom de Vries [gdb/tui] Fix TUI resizing for TERM=ansi With TERM=ansi, when resizing a TUI window from LINES/COLUMNS 31/118 (maximized) to 20/78 (de-maximized), I get a garbled screen (that ^L doesn't fix) and a message: ... @@ resize done 0, size = 77x20 ... with the resulting width being 77 instead of the expected 78. [ The discrepancy also manifests in CLI, filed as PR30346. ] The discrepancy comes from tui_resize_all, where we ask readline for the screen size: ... rl_get_screen_size (&screenheight, &screenwidth); ... As it happens, when TERM is set to ansi, readline decides that the terminal cannot auto-wrap lines, and reserves one column to deal with that, and as a result reports back one less than the actual screen width: ... $ echo $COLUMNS 78 $ TERM=xterm gdb -ex "show width" -ex q Number of characters gdb thinks are in a line is 78. $ TERM=ansi gdb -ex "show width" -ex q Number of characters gdb thinks are in a line is 77. ... In tui_resize_all, we need the actual screen width, and using a screenwidth of one less than the actual value garbles the screen. This is currently not causing trouble in testing because we have a workaround in place in proc Term::resize. If we disable the workaround: ... - stty columns [expr {$_cols + 1}] < $::gdb_tty_name + stty columns $_cols < $::gdb_tty_name ... and dump the screen we get the same type of screen garbling: ... 0 +---------------------------------------+| 1 || 2 || 3 || ... Another way to reproduce the problem is using command "maint info screen". After starting gdb with TERM=ansi, entering TUI, and issuing the command, we get: ... Number of characters curses thinks are in a line is 78. ... and after maximizing and demaximizing the window we get: ... Number of characters curses thinks are in a line is 77. ... If we use TERM=xterm, we do get the expected 78. Fix this by: - detecting when readline will report back less than the actual screen width, - accordingly setting a new variable readline_hidden_cols, - using readline_hidden_cols in tui_resize_all to fix the resize problem, and - removing the workaround in Term::resize. The test-case gdb.tui/empty.exp serves as regression test. I've applied the same fix in tui_async_resize_screen, the new test-case gdb.tui/resize-2.exp serves as a regression test for that change. Without that fix, we have: ... FAIL: gdb.tui/resize-2.exp: again: gdb width 80 ... Tested on x86_64-linux. PR tui/30337 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30337 2023-04-30 GDB Administrator Automatic date update in version.in 2023-04-29 Tom de Vries [gdb/testsuite] Fix gdb.base/readline.exp with stub-termcap When doing a build which uses stub-termcap, we run into: ... (gdb) set width 7 gdb: Fix building with latest libc++ Latest libc++[1] causes transitive include to when or header is included. This causes gdb to not build[2] since defines isupper/islower etc. functions that are explicitly macroed-out in safe-ctype.h to prevent their use. Use the suggestion from libc++ to include internally when building in C++ mode to avoid build errors. Use safe-gdb-ctype.h as the include instead of "safe-ctype.h" to keep this isolated to gdb since rest of binutils does not seem to use much C++. [1]: https://reviews.llvm.org/D144331 [2]: https://issuetracker.google.com/issues/277967395 2023-04-29 Tom de Vries [gdb/testsuite] Fix gdb.ada/excep_handle.exp for updated gdb_test Test-case gdb.ada/excep_handle.exp fails since commit e2f620135d9 ("gdb/testsuite: change newline patterns used in gdb_test"): ... (gdb) continue^M Continuing.^M ^M Catchpoint 2, exception at 0x00000000004020b6 in foo () at foo.adb:26^M 26 when Constraint_Error =>^M (gdb) FAIL: gdb.ada/excep_handle.exp: continuing to first Constraint_Error \ exception handlers ... The output is supposed to be matched by: ... gdb_test "continue" \ "Continuing\.$eol$catchpoint_constraint_error_msg$eol.*" \ "continuing to first Constraint_Error exception handlers" ... but the $eol bit no longer matches due to the stricter matching introduced in aforementioned commit. Fix this by dropping the "$eol.*" bit. Tested on x86_64-linux. PR testsuite/30399 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30399 2023-04-29 Tom de Vries [gdb/build] Fix build without ncurses in maintenance_info_screen With a build without ncurses we run into: ... src/gdb/utils.c: In function ‘void maintenance_info_screen(const char*, int)’: src/gdb/utils.c:1310:7: error: ‘COLS’ was not declared in this scope COLS); ^~~~ src/gdb/utils.c:1331:8: error: ‘LINES’ was not declared in this scope LINES); ^~~~~ ... Fix this by using HAVE_LIBCURSES. Tested on x86_64-linux. PR build/30391 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30391 2023-04-29 Tom de Vries [gdb/testsuite] Fix gdb.tui/main.exp without TUI With a build with --disable-tui, we get: ... (gdb) PASS: gdb.tui/main.exp: set interactive-mode off maint set tui-left-margin-verbose on^M Undefined maintenance set command: "tui-left-margin-verbose on". \ Try "help maintenance set".^M (gdb) FAIL: gdb.tui/main.exp: maint set tui-left-margin-verbose on ... Fix this by adding the missing "require allow_tui_tests". Tested on x86_64-linux. 2023-04-29 GDB Administrator Automatic date update in version.in 2023-04-29 Andrew Burgess gdb/mi: check thread exists when creating thread-specific b/p I noticed the following behaviour: $ gdb -q -i=mi /tmp/hello.x =thread-group-added,id="i1" =cmd-param-changed,param="print pretty",value="on" ~"Reading symbols from /tmp/hello.x...\n" (gdb) -break-insert -p 99 main ^done,bkpt={number="1",type="breakpoint",disp="keep",enabled="y",addr="0x0000000000401198",func="main",file="/tmp/hello.c",fullname="/tmp/hello.c",line="18",thread-groups=["i1"],thread="99",times="0",original-location="main"} (gdb) info breakpoints &"info breakpoints\n" ~"Num Type Disp Enb Address What\n" ~"1 breakpoint keep y 0x0000000000401198 in main at /tmp/hello.c:18\n" &"../../src/gdb/thread.c:1434: internal-error: print_thread_id: Assertion `thr != nullptr' failed.\nA problem internal to GDB has been detected,\nfurther debugging may prove unreliable." &"\n" &"----- Backtrace -----\n" &"Backtrace unavailable\n" &"---------------------\n" &"\nThis is a bug, please report it." &" For instructions, see:\n" &".\n\n" Aborted (core dumped) What we see here is that when using the MI a user can create thread-specific breakpoints for non-existent threads. Then if we try to use the CLI 'info breakpoints' command GDB throws an assertion. The assert is a result of the print_thread_id call when trying to build the 'stop only in thread xx.yy' line; print_thread_id requires a valid thread_info pointer, which we can't have for a non-existent thread. In contrast, when using the CLI we see this behaviour: $ gdb -q /tmp/hello.x Reading symbols from /tmp/hello.x... (gdb) break main thread 99 Unknown thread 99. (gdb) The CLI doesn't allow a breakpoint to be created for a non-existent thread. So the 'info breakpoints' command is always fine. Interestingly, the MI -break-info command doesn't crash, this is because the MI uses global thread-ids, and so never calls print_thread_id. However, GDB does support using CLI and MI in parallel, so we need to solve this problem. One option would be to change the CLI behaviour to allow printing breakpoints for non-existent threads. This would preserve the current MI behaviour. The other option is to pull the MI into line with the CLI and prevent breakpoints being created for non-existent threads. This is good for consistency, but is a breaking change for the MI. In the end I figured that it was probably better to retain the consistent CLI behaviour, and just made the MI reject requests to place a breakpoint on a non-existent thread. The only test we had that depended on the old behaviour was gdb.mi/mi-thread-specific-bp.exp, which was added by me in commit: commit 2fd9a436c8d24eb0af85ccb3a2fbdf9a9c679a6c Date: Fri Feb 17 10:48:06 2023 +0000 gdb: don't duplicate 'thread' field in MI breakpoint output I certainly didn't intend for this test to rely on this feature of the MI, so I propose to update this test to only create breakpoints for threads that exist. Actually, I've added a new test that checks the MI rejects creating a breakpoint for a non-existent thread, and I've also extended the test to run with the separate MI/CLI UIs, and then tested 'info breakpoints' to ensure this command doesn't crash. I've extended the documentation of the `-p` flag to explain the constraints better. I have also added a NEWS entry just in case someone runs into this issue, at least then they'll know this change in behaviour was intentional. One thing that I did wonder about while writing this patch, is whether we should treat requests like this, on both the MI and CLI, as another form of pending breakpoint, something like: (gdb) break foo thread 9 Thread 9 does not exist. Make breakpoint pending on future thread creation? (y or [n]) y Breakpoint 1 (foo thread 9) pending. (gdb) info breakpoints Num Type Disp Enb Address What 1 breakpoint keep y foo thread 9 Don't know if folk think that would be a useful idea or not? Either way, I think that would be a separate patch from this one. Reviewed-By: Eli Zaretskii 2023-04-28 Andrew Burgess gdb: make deprecated_show_value_hack static The deprecated_show_value_hack function is now only used inside cli-setshow.c, so lets make the function static to discourage its use anywhere else. There should be no user visible changes after this commit Reviewed-By: Tom Tromey 2023-04-28 Andrew Burgess gdb: make set/show inferior-tty work with $_gdb_setting_str Like the previous two commits, this commit fixes set/show inferior-tty to work with $_gdb_setting_str. Instead of using a scratch variable which is then pushed into the current inferior from a set callback, move to the API that allows for getters and setters, and store the value directly within the current inferior. Update an existing test to check the inferior-tty setting. Reviewed-By: Tom Tromey 2023-04-28 Andrew Burgess gdb: make set/show cwd work with $_gdb_setting_str The previous commit fixed set/show args when used with $_gdb_setting_str, this commit fixes set/show cwd. Instead of using a scratch variable which is then pushed into the current inferior from a set callback, move to the API that allows for getters and setters, and store the value directly within the current inferior. Update the existing test to check the cwd setting. 2023-04-28 Andrew Burgess gdb: make set/show args work with $_gdb_setting_str I noticed that $_gdb_setting_str was not working with 'args', e.g.: $ gdb -q --args /tmp/hello.x arg1 arg2 arg3 Reading symbols from /tmp/hello.x... (gdb) show args Argument list to give program being debugged when it is started is "arg1 arg2 arg3". (gdb) print $_gdb_setting_str("args") $1 = "" This is because the 'args' setting is implemented using a scratch variable ('inferior_args_scratch') which is updated when the user does 'set args ...'. There is then a function 'set_args_command' which is responsible for copying the scratch area into the current inferior. However, when the user sets the arguments via the command line the scratch variable is not updated, instead the arguments are pushed straight into the current inferior. There is a second problem, when the current inferior changes the scratch area is not updated, which means that the value returned will only ever reflect the last call to 'set args ...' regardless of which inferior is currently selected. Luckily, the fix is pretty easy, set/show variables have an alternative API which requires we provide some getter and setter functions. With this done the scratch variable can be removed and the value returned will now always reflect the current inferior. While working on set/show args I also rewrote show_args_command to remove the use of deprecated_show_value_hack. Reviewed-By: Tom Tromey 2023-04-28 Andrew Burgess gdb: cleanup command creation in infcmd.c In infcmd.c, in order to add command completion to some of the 'set' commands, we are currently creating the command, then looking up the command by calling lookup_cmd. This is no longer necessary, we already return the relevant cmd_list_element object when the set/show command is created, and we can use that to set the command completion callback. I don't know if there's actually any tests for completion of these commands, but I manually checked, and each command still appears to offer the expected filename completion. There should be no user visible changes after this commit. Reviewed-By: Tom Tromey 2023-04-28 Simon Marchi gdb/record-full: disable range stepping when resuming threads I see these failures, when running with the native-gdbserver of native-extended-gdbserver boards: Running /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.reverse/finish-reverse-next.exp ... FAIL: gdb.reverse/finish-reverse-next.exp: reverse next 1 LEP from function body FAIL: gdb.reverse/finish-reverse-next.exp: reverse next 2 at b = 5, from function body FAIL: gdb.reverse/finish-reverse-next.exp: reverse next 1 GEP call from function body FAIL: gdb.reverse/finish-reverse-next.exp: reverse next 2 at b = 50 from function body Let's use this simpler program to illustrate the problem: int main() { int a = 362; a = a * 17; return a; } It compiles down to: int a = 362; 401689: c7 45 fc 6a 01 00 00 movl $0x16a,-0x4(%rbp) a = a * 17; 401690: 8b 55 fc mov -0x4(%rbp),%edx 401693: 89 d0 mov %edx,%eax 401695: c1 e0 04 shl $0x4,%eax 401698: 01 d0 add %edx,%eax 40169a: 89 45 fc mov %eax,-0x4(%rbp) return a; 40169d: 8b 45 fc mov -0x4(%rbp),%eax When single stepping these lines, debugging locally, while recording, these are the recorded instructions (basically one for each instruction shown above): (gdb) maintenance print record-instruction 0 4 bytes of memory at address 0x00007fffffffdc5c changed from: 6a 01 00 00 Register rip changed: (void (*)()) 0x40169a (gdb) maintenance print record-instruction -1 Register rax changed: 5792 Register eflags changed: [ PF AF IF ] Register rip changed: (void (*)()) 0x401698 (gdb) maintenance print record-instruction -2 Register rax changed: 362 Register eflags changed: [ PF ZF IF ] Register rip changed: (void (*)()) 0x401695 (gdb) maintenance print record-instruction -3 Register rax changed: 4200069 Register rip changed: (void (*)()) 0x401693 (gdb) maintenance print record-instruction -4 Register rdx changed: 140737488346696 Register rip changed: (void (*)()) 0x401690 (gdb) maintenance print record-instruction -5 4 bytes of memory at address 0x00007fffffffdc5c changed from: 00 00 00 00 Register rip changed: (void (*)()) 0x401689 (gdb) maintenance print record-instruction -6 Not enough recorded history But when debugging remotely: (gdb) maintenance print record-instruction 0 Register rdx changed: 140737488346728 Register rip changed: (void (*)()) 0x401690 (gdb) maintenance print record-instruction -1 4 bytes of memory at address 0x00007fffffffdc7c changed from: 00 00 00 00 Register rip changed: (void (*)()) 0x401689 (gdb) maintenance print record-instruction -2 Not enough recorded history In this list, we only have entries for the beginning of each line. This is because of the remote target's support for range stepping. The record-full layer can only record instructions when the underlying process target reports a stop. With range stepping, the remote target single-steps multiple instructions at a time, so the record-full target doesn't get to see and record them all. Fix this by making the record-full layer disable range-stepping before handing the resume request to the beneath layer, forcing the remote target to report stops for each instruction. Change-Id: Ia95ea62720bbcd0b6536a904360ffbf839eb823d 2023-04-28 Keith Seitz Allow strings with printf/eval PR 13098 explains that if a user attempts to use a string with either `printf' (or `eval'), gdb returns an error (inferior not running): (gdb) printf "%s\n", "hello" evaluation of this expression requires the target program to be active However, the parser can certainly handle this case: (gdb) p "hello" $1 = "hello" This discrepancy occurs because printf_c_string does not handle this specific case. The passed-in value that we are attempting to print as a string is TYPE_CODE_ARRAY but it's lval type is not_lval. printf_c_string will only attempt to print a string from the value's contents when !TYPE_CODE_PTR, lval is lval_internalvar, and the value's type is considered a string type: if (value->type ()->code () != TYPE_CODE_PTR && value->lval () == lval_internalvar && c_is_string_type_p (value->type ())) { ... } Otherwise, it attempts to read the value of the string from the target's memory (which is what actually generates the "evaluation of this ..." error message). 2023-04-28 Tom Tromey Move find_minimal_symbol_address to minsyms.c I found find_minimal_symbol_address in parse.c, but it seems to me that it belongs in minsyms.c. Reviewed-By: Andrew Burgess 2023-04-28 Tom Tromey Do not change type in get_discrete_low_bound get_discrete_low_bound has this code: /* Set unsigned indicator if warranted. */ if (low >= 0) type->set_is_unsigned (true); It's bad to modify a type in a getter like this, so this patch removes this code. FWIW I looked and this code has been there since at least 1999 (it was in the initial sourceware import). Types in general would benefit from const-ification, which would probably reveal more code like this, but I haven't attempted that. Regression tested on x86-64 Fedora 36. Reviewed-by: Kevin Buettner 2023-04-28 Tom Tromey Remove @var from @defun in Python documentation Eli pointed out that @var isn't needed in @defun in Texinfo. This patch removes the cases I found in python.texi. I also renamed some variables in one spot, because "-" isn't valid in a Python variable name. 2023-04-28 Andrew Burgess gdb/testsuite: additional test fixes after gdb_test changes After this commit: commit e2f620135d92f7cd670af4e524fffec7ac307666 Date: Thu Mar 30 13:26:25 2023 +0100 gdb/testsuite: change newline patterns used in gdb_test There were some regressions in gdb.trace/*.exp tests when run with the native-gdbserver board. This commit fixes these regressions. All the problems are caused by unnecessary trailing newline characters included in the patterns passed to gdb_test. After the above commit the testsuite is stricter when matching trailing newlines, and so the additional trailing newline characters are now causing the test to fail. Fix by removing all the excess trailing newline characters. In some cases this cleanup means we should use gdb_test_no_output, I've done that where appropriate. In a couple of other places I've made use of multi_line to better build the expected output pattern. 2023-04-28 H.J. Lu ld: Use run_cc_link_tests for PR ld/26391 tests Use run_cc_link_tests for PR ld/26391 tests to compile PR ld/26391 tests in C. PR ld/30002 * testsuite/ld-elf/elf.exp: Use run_cc_link_tests for PR ld/26391 tests. 2023-04-28 Eli Zaretskii Fix a typo in gdb.texinfo. 2023-04-28 Nelson Chu RISC-V: Enable x0 base relaxation for relax_pc even if --no-relax-gp. Let --no-relax-gp only disable the gp relaxation for lui and pcrel relaxations, since x0 base and gp relaxations are different optimizations in fact, but just use the same function to handle. bfd/ * elfnn-riscv.c (_bfd_riscv_relax_pc): Like _bfd_riscv_relax_lui, set gp to zero when --no-relax-gp, then we should still keep the x0 base relaxation. (_bfd_riscv_relax_section): Enable _bfd_riscv_relax_pc when --no-relax-gp, we will disable the gp relaxation in the _bfd_riscv_relax_pc. 2023-04-28 Nelson Chu RISC-V: Relax R_RISCV_[PCREL_]LO12_I/S to R_RISCV_GPREL_I/S for undefined weak. bfd/ *elfnn-riscv.c (_bfd_riscv_relax_lui): For undefined weak symbol, just relax the R_RISCV_LO12_I/S to R_RISCV_GPREL_I/S, and then don't update the rs1 to zero until relocate_section. (_bfd_riscv_relax_pc): Likewise, but for R_RISCV_PCREL_LO12_I/S. 2023-04-28 Jan Beulich x86: limit data passed to i386_dis_printf() The function doesn't use "ins" for other than retrieving "info". Remove a thus pointless level of indirection. x86: limit data passed to prefix_name() Make apparent that neither what "ins" points to nor, in particular, that "ins->info->private_data" is actually used in the function. x86/Intel: reduce ELF/PE conditional scope in x86_cons() All the Intel syntax related state adjustments apply independent of target or object format. gas: move shift count check ... out of mainline code, grouping together the two case labels. This then also make more obvious that the comment there applies to both forms of shifts. x86: rework AMX control insn disassembly Consistently do 64-bit first, VEX.L second, VEX.W third, ModR/M fourth, and only then prefix, resulting in fewer table entries. Note that in the course of the re-work - TILEZERO has a previously missing decode step through rm_table[] added, - a wrong M_0 suffix for TILEZERO is also corrected to be M_1 (now an infix). 2023-04-28 Jan Beulich x86: rework AMX multiplication insn disassembly Consistently do 64-bit first, ModR/M second, VEX.L third, VEX.W fourth, and prefix last, resulting in fewer table entries. Note that in the course of the re-work wrong M_0 suffixes are also corrected to be M_1 (partly infixes now). Since it ended up confusing while testing the change, also adjust the test name in x86-64-amx-bad.d (to be distinct from x86-64-amx.d's). 2023-04-28 Alan Modra Re: Keeping track of rs6000-coff archive element pointers Commit de7b90610e9e left a hole in the element checking, explained by the comment added to _bfd_xcoff_openr_next_archived_file. While fixing this, tidy some types used to hold unsigned values so that casts are not needed to avoid signed/unsigned comparison warnings. Also tidy a few things in xcoff.h. bfd/ * coff-rs6000.c (_bfd_xcoff_openr_next_archived_file): Check that we aren't pointing back at the last element. Make filestart a ufile_ptr. Update for xcoff_artdata change. (_bfd_strntol, _bfd_strntoll): Return unsigned values. (_bfd_xcoff_slurp_armap): Make off a ufile_ptr. (add_ranges): Update for xcoff_artdata change. * libbfd-in.h (struct artdata): Make first_file_filepos a ufile_ptr. * libbfd.h: Regenerate. include/ * coff/xcoff.h (struct xcoff_artdata): Replace min_elt with ar_hdr_size. (xcoff_big_format_p): In the !SMALL_ARCHIVE case return true for anything but a small archive. 2023-04-28 Alan Modra Remove deprecated bfd_read 20+ years is long enough to warn. * bfd-in.h (bfd_read, bfd_write): Don't define (_bfd_warn_deprecated): Don't declare. * bfd-in2.h: Regenerate. * libbfd.c (_bfd_warn_deprecated): Delete. 2023-04-28 Alan Modra Make bfd_byte an int8_t, flagword a uint32_t * bfd-in.h (bfd_byte): Typedef as int8_t. (flagword): Typedef as uint32_t. (bfd_vma, bfd_signed_vma, bfd_size_type, symvalue): Use stdint types in !BFD64 case. * bfd-in2.h: Regenerate. 2023-04-28 GDB Administrator Automatic date update in version.in 2023-04-27 Jose E. Marchesi gas: bpf: fix tests for pseudo-c syntax This patch fixes the GAS BPF testsuite so the tests for pseudo-c syntax are actually executed. 2023-04-27 Jose E. Marchesi * testsuite/gas/bpf/mem.dump: New file. * testsuite/gas/bpf/mem-pseudoc.d: Likewise. * testsuite/gas/bpf/mem.d: #dump mem.dump. * testsuite/gas/bpf/lddw.dump: New file. * testsuite/gas/bpf/lddw-pseudoc.d: Likewise. * testsuite/gas/bpf/lddw.d: #dump lddw.dump. * testsuite/gas/bpf/jump.dump: New file. * testsuite/gas/bpf/jump-pseudoc.d: Likewise * testsuite/gas/bpf/jump.d: #dump jump.dump. * testsuite/gas/bpf/jump32.dump: New file. * testsuite/gas/bpf/jump32-pseudoc.d: Likewise. * testsuite/gas/bpf/jump32.d: #dump jump32.dump. * testsuite/gas/bpf/lddw-be.dump: New file. * testsuite/gas/bpf/lddw-be-pseudoc.d: Likewise. * testsuite/gas/bpf/lddw-be.d: #dump lddw-be.dump. * testsuite/gas/bpf/indcall-1.dump: New file. * testsuite/gas/bpf/indcall-1-pseudoc.d: Likewise. * testsuite/gas/bpf/indcall-1.d: #dump indcall-1.dump. * testsuite/gas/bpf/indcall-1-pseudoc.s (main): Fix lddw instruction. * testsuite/gas/bpf/atomic.dump: New file. * testsuite/gas/bpf/atomic-pseudoc.d: Likewise. * testsuite/gas/bpf/atomic.d: #dump atomic.dump. * testsuite/gas/bpf/alu32.dump: New file. * testsuite/gas/bpf/alu32-pseudoc.d: Likewise. * testsuite/gas/bpf/alu32.d: #dump alu32.dump. * testsuite/gas/bpf/alu.dump: New file. * testsuite/gas/bpf/alu-pseudoc.d: Likewise. * testsuite/gas/bpf/alu.d: #dump alu.dump. * testsuite/gas/bpf/alu-be.dump: New file. * testsuite/gas/bpf/alu-be-pseudoc.d: Likewise. * testsuite/gas/bpf/alu-be.d: #dump alu-be.dump. * testsuite/gas/bpf/alu32-be-pseudoc.d: New file. * testsuite/gas/bpf/alu32-be-dump: Likewise. * testsuite/gas/bpf/alu32-be.d: #dump alu32-be-dump. * testsuite/gas/bpf/bpf.exp: Run *-pseudoc tests. 2023-04-27 Tom Tromey Avoid some compiler warnings in gdb.ada Running gdb.ada/verylong.exp shows a warning from the Ada compiler: prog.adb:16:11: warning: file name does not match unit name, should be "main.adb" [enabled by default] This patch fixes the problem, and another similar one in unchecked_union.exp. 2023-04-27 Michael Matz Fix PR30358, performance with --sort-section since af31506c we only use the binary tree when section sorting is required. While its unbalanced and hence can degrade to a linear list it should otherwise have been equivalent to the old code relying on insertion sort. Unfortunately it was not. The old code directly used lang_add_section to populate the sorted list, the new code first populates the tree and only then does lang_add_section on the sorted result. In the testcase we have very many linkonce section groups, and hence lang_add_section won't actually insert anything for most of them. That limited the to-be-sorted list length previously. The tree-sorting code OTOH first created a tree of all candidates sections, including those that wouldn't be inserted by lang_add_section, hence increasing the size of the sorting problem. In the testcase the chain length went from about 1500 to 106000, and in the degenerated case (as in the testcase) that goes in quadratically. This splits out most of the early-out code from lang_add_section to its own function and uses the latter to avoid inserting into the tree. This refactoring slightly changes the order of early-out tests (the ones based on section flags is now done last, and only in lang_add_section). The new function is not a pure predicate: it can give warnings and it might change output_section, like the old early-out code did. I have also added a skip-warning case in the first discard case, whose non-existence seemed to have been an oversight. PR 30358 * ldlang.c (wont_add_section_p): Split out from ... (lang_add_section): ... here. (output_section_callback_sort): Use wont_add_section_p to not always add sections to the sort tree. 2023-04-27 Andrew Burgess gdb/doc: extend the documentation of the jump command This commit addresses PR gdb/7946. While checking for bugs relating to the jump command I noticed a long standing bug that points out a deficiency with GDB's documentation of the jump command. The bug points out that 'jump 0x...' is not always the same as 'set $pc = 0x...' and then 'continue'. Writing directly to the $pc register does not update any auxiliary state, e.g. $npc on SPARC, while using 'jump' does. It felt like this would be an easy issue to address by adding a paragraph to the docs, so I took a stab at writing something suitable. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7946 Approved-By: Eli Zaretskii 2023-04-27 Andrew Burgess gdb/testsuite: special case '^' in gdb_test pattern In this commit I propose that we add special handling for the '^' when used at the start of a gdb_test pattern. Consider this usage: gdb_test "some_command" "^command output pattern" I think the intention here is pretty clear - run 'some_command', and the output from the command should be exactly 'command output pattern'. After the previous commit which tightened up how gdb_test matches the final newline and prompt we know that the only thing after the output pattern will be a single newline and prompt, and the leading '^' ensures that there's no output before 'command output pattern', so this will do what I want, right? ... except it doesn't. The command itself will also needs to be matched, so I should really write: gdb_test "some_command" "^some_command\r\ncommand output pattern" which will do what I want, right? Well, that's fine until I change the command and include some regexp character, then I have to write: gdb_test "some_command" \ "^[string_to_regexp some_command]\r\ncommand output pattern" but this all gets a bit verbose, so in most cases I simply don't bother anchoring the output with a '^', and a quick scan of the testsuite would indicate that most other folk don't both either. What I propose is this: the *only* thing that can appear immediately after the '^' is the command converted into a regexp, so lets do that automatically, moving the work into gdb_test. Thus, when I write: gdb_test "some_command" "^command output pattern" Inside gdb_test we will spot the leading '^' in the pattern, and inject the regexp version of the command after the '^', followed by a '\r\n'. My hope is that given this new ability, folk will be more inclined to anchor their output patterns when this makes sense to do so. This should increase our ability to catch any unexpected output from GDB that appears as a result of running a particular command. There is one problem case we need to consider, sometime people do this: gdb_test "" "^expected output pattern" In this case no command is sent to GDB, but we are still expecting some output from GDB. This might be a result of some asynchronous event for example. As there is no command sent to GDB (from the gdb_test) there will be no command text to parse. In this case my proposed new feature injects the command regexp, which is the empty string (as the command itself is empty), but still injects the '\r\n' after the command regexp, thus we end up with this pattern: ^\r\nexpected output pattern This extra '\r\n' is not what we should expected here, and so there is a special case inside gdb_test -- if the command is empty then don't add anything after the '^' character. There are a bunch of tests that do already use '^' followed by the command, and these can all be simplified in this commit. I've tried to run all the tests that I can to check this commit, but I am certain that there will be some tests that I manage to miss. Apologies for any regressions this commit causes, hopefully fixing the regressions will not be too hard. Reviewed-By: Tom Tromey 2023-04-27 Andrew Burgess gdb/testsuite: change newline patterns used in gdb_test This commit makes two changes to how we match newline characters in the gdb_test proc. First, for the newline pattern between the command output and the prompt, I propose changing from '[\r\n]+' to an explicit '\r\n'. The old pattern would spot multiple newlines, and so there are a few places where, as part of this commit, I've needed to add an extra trailing '\r\n' to the pattern in the main test file, where GDB's output actually includes a blank line. But I think this is a good thing. If a command produces a blank line then we should be checking for it, the current gdb_test doesn't do that. But also, with the current gdb_test, if a blank line suddenly appears in the output, this is going to be silently ignored, and I think this is wrong, the test should fail in that case. Additionally, the existing pattern will happily match a partial newline. There are a strangely large number of tests that end with a random '.' character. Not matching a literal period, but matching any single character, this is then matching half of the trailing newline sequence, while the \[\r\n\]+ in gdb_test is matching the other half of the sequence. I can think of no reason why this would be intentional, I suspect that the expected output at one time included a period, which has since been remove, but I haven't bothered to check on this. In this commit I've removed all these unneeded trailing '.' characters. The basic rule of gdb_test after this is that the expected pattern needs to match everything up to, but not including the newline sequence immediately before the GDB prompt. This is generally how the proc is used anyway, so in almost all cases, this commit represents no significant change. Second, while I was cleaning up newline matching in gdb_test, I've also removed the '[\r\n]*' that was added to the start of the pattern passed to gdb_test_multiple. The addition of this pattern adds no value. If the user pattern matches at the start of a line then this would match against the newline sequence. But, due to the '*', if the user pattern doesn't match at the start of a line then this group doesn't care, it'll happily match nothing. As such, there's no value to it, it just adds more complexity for no gain, so I'm removing it. No tests will need updating as a consequence of this part of the patch. Reviewed-By: Tom Tromey 2023-04-27 Andrew Burgess gdb/testsuite: use 'return' in gdb_test_no_output A TCL proc will return the return value of the last command executed within the proc's body if there is no explicit return call, so gdb_test_no_output is already returning the return value of gdb_test_multiple. However, I'm not a fan of (relying on) this implicit return value behaviour -- I prefer to be explicit about what we are doing. So in this commit I have extended the comment on gdb_test_no_output to document the possible return values (just as gdb_test does), and explicitly call return. This should make no different to our testing, but I think it's clearer now what the gdb_test_no_output proc is expected to do. The two tests gdb.base/auxv.exp and gdb.base/list.exp both rely on the return value of gdb_test_no_output, and continue to pass after this change. I also spotted that gdb.base/watchpoint.exp could be updated to make use of gdb_test_no_output, so I did that. Reviewed-By: Tom Tromey 2023-04-27 Andrew Burgess gdb: remove some trailing newlines from warning messages While working on a later patch in this series, which tightens up some of our pattern matching when using gdb_test, I ran into some failures caused by some warnings having a trailing newline character. The warning function already adds a trailing newline, and it is my understanding that we should not be adding a second by including a newline at the end of any warning message. The problem cases I found were in language.c and remote.c, in this patch I fix the cases I hit, but I also checked all the other warning calls in these two files and removed any additional trailing newlines I found. In remote.c the warning actually had a newline character in the middle of the warning message (in addition to the trailing newline), which I've removed. I don't think it's helpful to forcibly split a warning as was done here -- in the middle of a sentence. Additionally, the message isn't even that long (71 characters), so I think removing this newline is an improvement. None of the expected test result need updating with this commit, currently the patterns in gdb_test will match one or more newline sequences, so the tests are as happy with one newline (after this commit) as they are with two newlines (before this commit). A later commit will change gdb_test so that it is not so forgiving, and these warnings would have caused some failures. Reviewed-By: Tom Tromey 2023-04-27 Andrew Burgess gdb/testsuite: fix occasional failure in gdb.base/clear_non_user_bp.exp I noticed that the gdb.base/clear_non_user_bp.exp test would sometimes fail when run from a particular directory. The test tries to find the number of the first internal breakpoint using this proc: proc get_first_maint_bp_num { } { gdb_test_multiple "maint info break" "find first internal bp num" { -re -wrap "(-\[0-9\]).*" { return $expect_out(1,string) } } return "" } The problem is, at the time we issue 'maint info break' there are both internal breakpoint and non-internal (user created) breakpoints in place. The user created breakpoints include the path to the source file. Sometimes, I'll be working from a directory that includes a number, like '/tmp/blah-1/gdb/etc', in which case the pattern above actually matches the '-1' from 'blah-1'. In this case there's no significant problem as it turns out that -1 is the number of the first internal breakpoint. Sometimes my directory name might be '/tmp/blah-4/gdb/etc', in which case the above pattern patches '-4' from 'blah-4'. It turns out this is also not a problem -- the test doesn't actually need the first internal breakpoint number, it just needs the number of any internal breakpoint. But sometimes my directory name might be '/tmp/blah-0/gdb/etc', in which case the pattern above matches '-0' from 'blah-0', and in this case the test fails - there is no internal breakpoint '-0'. Fix this by spotting that the internal breakpoint numbers always occurs after a '\r\n', and that they never start with a 0. Our pattern becomes: -re -wrap "\r\n(-\[1-9\]\[0-9\]*).*" { return $expect_out(1,string) } After this I'm no longer seeing any failures. Reviewed-By: Tom Tromey 2023-04-27 Tankut Baris Aktemur gdb, doc: add index entry for the $_inferior_thread_count convenience var Add a marker in the documentation for indexing the $_inferior_thread_count variable. Approved-By: Eli Zaretskii 2023-04-27 Nick Clifton Add support for %x and %lx formats to the linker's vinfo() function. 2023-04-27 GDB Administrator Automatic date update in version.in 2023-04-26 Philipp Tomsich RISC-V: Support XVentanaCondOps extension Ventana Micro has published the specification for their XVentanaCondOps ("conditional ops") extension at https://github.com/ventanamicro/ventana-custom-extensions/releases/download/v1.0.0/ventana-custom-extensions-v1.0.0.pdf which contains two new instructions - vt.maskc - vt.maskcn that can be used in constructing branchless sequences for various conditional-arithmetic, conditional-logical, and conditional-select operations. To support such vendor-defined instructions in the mainline binutils, this change also adds a riscv_supported_vendor_x_ext secondary dispatch table (but also keeps the behaviour of allowing any unknow X-extension to be specified in addition to the known ones from this table). As discussed, this change already includes the planned/agreed future requirements for X-extensions (which are likely to be captured in the riscv-toolchain-conventions repository): - a public specification document is available (see above) and is referenced from the gas-documentation - the naming follows chapter 27 of the RISC-V ISA specification - instructions are prefixed by a vendor-prefix (vt for Ventana) to ensure that they neither conflict with future standard extensions nor clash with other vendors bfd/ChangeLog: * elfxx-riscv.c (riscv_get_default_ext_version): Add riscv_supported_vendor_x_ext. (riscv_multi_subset_supports): Recognize INSN_CLASS_XVENTANACONDOPS. gas/ChangeLog: * doc/c-riscv.texi: Add section to list custom extensions and their documentation URLs. * testsuite/gas/riscv/x-ventana-condops.d: New test. * testsuite/gas/riscv/x-ventana-condops.s: New test. include/ChangeLog: * opcode/riscv-opc.h Add vt.maskc and vt.maskcn. * opcode/riscv.h (enum riscv_insn_class): Add INSN_CLASS_XVENTANACONDOPS. opcodes/ChangeLog: * riscv-opc.c: Add vt.maskc and vt.maskcn. Series-version: 1 Series-to: binutils@sourceware.org Series-cc: Kito Cheng Series-cc: Nelson Chu Series-cc: Greg Favor Series-cc: Christoph Muellner 2023-04-26 Jose E. Marchesi gas: documentation for the BPF pseudo-c asm syntax This patch expands the GAS manual in order to specify the alternate pseudo-C assembly syntax used in BPF, and now supported by the assembler. gas/ChangeLog: 2023-04-19 Jose E. Marchesi PR gas/29757 * doc/c-bpf.texi (BPF Pseudo-C Syntax): New section. 2023-04-26 Guillermo E. Martinez gas: BPF pseudo-c syntax tests This patch expands the GAS BPF testsuite in order to also test the alternative pseudo-C syntax used in BPF assembly. This includes three main changes: - Some general GAS tests involving assignment and equality operands in expressions (such as = and ==) are disabled in bpf-* targets, because the syntax collides with the pseudo-C BPF assembly syntax. - New tests are added to the BPF GAS testsuite that test the pseudo-c syntax. Tests for all BPF instructions are included. - New tests are added to the BPF GAS testsuite that test the support for both syntaxes in the same source. gas/ChangeLog: 2023-04-20 Guillermo E. Martinez PR gas/29728 * testsuite/gas/all/assign-bad-recursive.d: Skip test in bpf-* targets. * testsuite/gas/all/eqv-dot.d: Likewise. * testsuite/gas/all/gas.exp: Skip other assignment tests in bpf-*. * testsuite/gas/bpf/alu-pseudoc.s: New file. * testsuite/gas/bpf/pseudoc-normal.s: Likewise. * testsuite/gas/bpf/pseudoc-normal.d: Likewise. * testsuite/gas/bpf/pseudoc-normal-be.d: Likewise. * testsuite/gas/bpf/mem-pseudoc.s: Likewise. * testsuite/gas/bpf/lddw-pseudoc.s: Likewise. * testsuite/gas/bpf/jump32-pseudoc.s: Likewise. * testsuite/gas/bpf/jump-pseudoc.s: Likewise. * testsuite/gas/bpf/indcall-1-pseudoc.s: Likewise. * testsuite/gas/bpf/atomic-pseudoc.s: Likewise. * testsuite/gas/bpf/alu32-pseudoc.s: Likewise. * testsuite/gas/bpf/*.d: Add -pseudoc variants of the tests. 2023-04-26 Guillermo E. Martinez gas: support for the BPF pseudo-c assembly syntax This patch adds support to the GNU assembler for an alternative assembly syntax used in BPF. This syntax is C-like and very unconventional for an assembly language, but it is generated by clang/llvm and is also used in inline asm templates in kernel code, so we ought to support it. After this patch, the assembler is able to parse instructions in both supported syntax: the normal assembly-like syntax and the pseudo-C syntax. Instruction formats can be mixed in the source program: the assembler recognizes the right syntax to use. gas/ChangeLog: 2023-04-20 Guillermo E. Martinez PR gas/29728 * config/tc-bpf.h (TC_EQUAL_IN_INSN): Define. * config/tc-bpf.c (LEX_IS_SYMBOL_COMPONENT): Define. (LEX_IS_WHITESPACE): Likewise. (LEX_IS_NEWLINE): Likewise. (LEX_IS_ARITHM_OP): Likewise. (LEX_IS_STAR): Likewise. (LEX_IS_CLSE_BR): Likewise. (LEX_IS_OPEN_BR): Likewise. (LEX_IS_EQUAL): Likewise. (LEX_IS_EXCLA): Likewise. (ST_EOI): Likewise. (MAX_TOKEN_SZ): Likewise. (init_pseudoc_lex): New function. (md_begin): Call init_pseudoc_lex. (valid_expr): New function. (build_bpf_non_generic_load): Likewise. (build_bpf_atomic_insn): Likewise. (build_bpf_jmp_insn): Likewise. (build_bpf_arithm_insn): Likewise. (build_bpf_endianness): Likewise. (build_bpf_load_store_insn): Likewise. (look_for_reserved_word): Likewise. (is_register): Likewise. (is_cast): Likewise. (get_token): Likewise. (bpf_pseudoc_to_normal_syntax): Likewise. (md_assemble): Try pseudo-C syntax if an instruction cannot be parsed. 2023-04-26 Jose E. Marchesi sim: bpf: update to new BPF relocations This patch updates the BPF GNU sim testsuite in order to match the new BPF relocations introduced in binutils in a recent patch [1]. [1] https://sourceware.org/pipermail/binutils/2023-March/126429.html 2023-04-26 Tom de Vries [gdb/tui] Fix length of status line string In commit 5d10a2041eb ("gdb: add string_file::release method") this was added: ... + std::string string_val = string.release (); ... without updating subsequent uses of string.size (), which returns 0 after the string.release () call. Fix this by: - using string_val.size () instead of string.size (), and - adding an assert that would have caught this regression. Tested on x86_64-linux. Reviewed-By: Simon Marchi PR tui/30389 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30389 2023-04-26 Tom Tromey Rewrite gdb_mpz::operator== Simon pointed out that the recent changes to gdb_mpz caused a build failure on amd64 macOS. It turns out to be somewhat difficult to overload a method in a way that will work "naturally" for all integer types; especially in a case like gdb_mpz::operator==, where it's desirable to special case all integer types that are no wider than 'long'. After a false start, I came up with this patch, which seems to work. It applies the desirable GMP special cases directly in the body, rather than via overloads. Approved-By: Simon Marchi 2023-04-26 Luis Machado Updated debug architecture version checks for fbsd There are two new debug architecture version entries. I updated the code for Linux, but fbsd also needs updating. This patch does this, and should be pretty straightforward. I can't test this on native fbsd, but I'm fairly confident it should work. 2023-04-26 Luis Machado Add new debug architecture version Teach gdb about a new debug architecture version for AArch64 (0x11). No user-visible changes. Regression-tested on aarch64-linux Ubuntu 20.04/22.04. 2023-04-26 Alan Modra i386-dis.c UB shift and other tidies 1) i386-dis.c:12055:11: runtime error: left shift of negative value -1 Bit twiddling is best done unsigned, due to UB on overflow of signed expressions. Fix this by using bfd_vma rather than bfd_signed_vma everywhere in i386-dis.c except print_displacement. 2) Return get32s and get16 value in a bfd_vma, reducing the need for temp variables. 3) Introduce get16s and get8s functions to simplify the code. 4) With some optimisation options gcc-13 legitimately complains about a fall-through in OP_I. Fix that. OP_I also doesn't need to use "mask" which was wrong for w_mode anyway. 5) Masking with & 0xffffffff is better than casting to unsigned. We don't know for sure that unsigned int is 32-bit. 6) We also don't know that unsigned char is 8 bits. Mask codep accesses everywhere. I don't expect binutils will work on anything other than an 8-bit char host, but if we are masking codep accesses in some places we might as well be consistent. (Better would be to use stdint.h types more in binutils.) 2023-04-26 Alan Modra binutils runtest $CC I noticed in the binutile Makefile that runtest is being invoked with CC, CC_FOR_BUILD and other compiler related flags in the environment. That doesn't work. Those variables ought to be passed on the runtest command line. After fixing that I had some fails due to binutils testprog.c now being compiled with the default "-g -O2" picked up in CFLAGS_FOR_TARGET. Hack around that by passing -O0. Also, with the binutils testsuite now taking notice of CC_FOR_TARGET, I found a couple of debuginfod.exp fails with one of my compilers that happened to be built without --debug-id being enabled by default. * Makefile.am (check-DEJAGNU): Pass $CC and other variable on the runtest command line rather than futilely in the environment. Add -O0 to CFLAGS_FOR_TARGET. * Makefile.in: Regenerate. * testsuite/binutils-all/debuginfod.exp: Compile testprog.c with -Wl,--build-id. 2023-04-26 Alan Modra Avoid another -Werror=dangling-pointer write.c:415:7: error: dangling pointer ‘prev_frag’ to ‘dummy’ may be used * write.c (chain_frchains_together_1): Rewrite loop as a do while to avoid false positive -Wdangling-pointer. 2023-04-26 GDB Administrator Automatic date update in version.in 2023-04-25 Tom Tromey Use scoped_restore in varobj.c One spot in varobj.c should use scoped_restore to save and restore input_radix. Note that the current code may fail to restore it on error, so this patch fixes a latent bug. Approved-By: Simon Marchi 2023-04-25 Tom Tromey Remove some "goto"s from parse.c parser_state::push_dollar has some unnecessary "goto"s. Replacing them cleans up the code. Regression tested on x86-64 Fedora 36. Approved-By: Simon Marchi 2023-04-25 Michael Matz section-select: Fix performance problem (PR30367) when using many wild-statements with non-wildcard filenames we were running into quadraticness via repeatedly using lookup_name on a long list of loaded files. I've originally retained using lookup_name because that preserved existing behaviour most obviously. In particular in matching wild-statements when using a non-wildcard filename it matches against local_sym_name, not the filename member. If the wildspec would have an archive-spec or a wildcard it would use the filename member, though. Also it would load the named file (and ignore it, as being not equal to the currently considered input-statement). Rewrite this to not use lookup_name but retain the comparison against local_sym_name with a comment to that effect. PR 30367 * ldlang.c (walk_wild_section_match): Don't use lookup_name but directly compare spec and local_sym_name. 2023-04-25 Jan Beulich RISC-V: adjust logic to avoid register name symbols Special casing GPR names in my_getSmallExpression() leads to a number of inconsistencies. Generalize this by utilizing the md_parse_name() hook, limited to when instruction operands are being parsed (really: probed). Then both the GPR lookup there and the yet more ad hoc workaround for PR/gas 29940 can be removed (including its extension needed for making the compressed form JAL work again). RISC-V: test for expected / no unexpected symbols Both the temporary workaround for PR/gas 29940 and the existing special casing of GPRs in my_getSmallExpression() aren't really tested anywhere (i.e. with the workarounds remove testing would still succeed). Nor is there any test for uses of symbols with names matching GPRs, where such is permitted. Before altering how this is to be dealt with, install two testcases covering the expected behavior. (For now this includes only known affected insns; re-ordering of entries in riscv_opcodes[] could, however, yield more of them.) RISC-V: don't recognize bogus relocations With my_getSmallExpression() consistently and silently failing on relocation operators not fitting an insn, it is no longer necessary to hand it percent_op_itype[] "just in case" (i.e. to avoid errors when a subsequent parsing attempt for another operand combination might succeed). This also eliminates the latent problem of percent_op_itype[] and percent_op_stype[] growing a non-identical set of recognized relocation operators. RISC-V: avoid redundant and misleading/wrong error messages The use of a wrong (for the insn) relocation operator (or a future one which simply isn't recognized by older gas yet) doesn't render the (rest of the) expression "bad". Furthermore alongside the error from expression() in most cases the parser would emit another error then anyway. Suppress the call to my_getExpression() in such a case, arranging for a guaranteed subsequent error message by marking the expression "illegal". RISC-V: drop "percent_op" parameter from my_getOpcodeExpression() Both callers check for no relocations, so there's no point parsing for some. Have the function pass percent_op_null into my_getSmallExpression(). Note that there's no point passing percent_op_itype: Elsewhere, especially when processing compressed alias insns ahead of non-alias ones, this has the effect of avoiding "bad expression" errors when another parsing pass may follow (and succeed). Here, however, all alternative forms of an insn type will again start with the same O4 or O2, so avoiding errors earlier on doesn't really help. Plus constructs with a relocation specifier (as percent_op_itype would permit) can't be specified anyway, as the scrubber eats the whitespace between .insn's type and the O4 or O2 expression when that starts with % or ( - i.e. these will be seen as e.g. "i%lo(x)", and riscv_ip() looks only for whitespace when finding the end of a mnemonic. RISC-V: minor effort reduction in relocation specifier parsing The sole caller of parse_relocation() has already checked for the % prefix, so there's no need to check for it again in the strncasecmp() and there's also no reason to make the involved string literals longer than necessary. 2023-04-25 Tom de Vries [gdb/testsuite] Fix timeout in gdb.tui/empty.exp In test-case gdb.tui/empty.exp we run into: ... WARNING: timeout in accept_gdb_output PASS: gdb.tui/empty.exp: src: 90x40: box 1 ... We timeout here in Term::resize: ... # Due to the strange column resizing behavior, and because we # don't care about this intermediate resize, we don't check # the size here. wait_for "@@ resize done $_resize_count" ... because the string we're trying to match is split over two lines: ... 25 -----------------------------------------------------------------------------+No 26 ne No process In: L?? PC: ?? @@ 27 resize done 0, size = 79x40 28 (gdb) ... Fix this by dropping the "@@ " prefix. Tested on x86_64-linux. 2023-04-25 Tom de Vries [gdb/testsuite] Fix timeout in gdb.tui/completion.exp With test-case gdb.tui/completion.exp, we run into: ... WARNING: timeout in accept_gdb_output PASS: gdb.tui/completion.exp: check focus completions ... The timeout happens in this command: ... Term::command "layout src" ... which waits for: - "(gdb) layout src", and then - "(gdb) ". Because the "layout src" command enables the TUI there's just a prompt. Fix this by using Term::command_no_prompt_prefix. Tested on x86_64-linux. 2023-04-25 Tom de Vries [gdb/testsuite] Fix timeout in gdb.tui/new-layout.exp In test-case gdb.tui/new-layout.exp we run into: ... WARNING: timeout in accept_gdb_output PASS: gdb.tui/new-layout.exp: layout=cmd_only {cmd 1} {} {}: \ bottom of cmd window is blank ... The timeout happens here: ... Term::command "layout src" ... Before the "layout src" command we have: ... Screen Dump (size 80 columns x 24 rows, cursor at column 46, row 7): 0 +-tui-layout.c-------------------------+(gdb) layout example3 1 | 20 { |(gdb) layout src 2 | 21 return 0; |(gdb) winheight cmd 8 3 | 22 } |(gdb) layout example4 4 | 23 |(gdb) layout src 5 | 24 |(gdb) winheight cmd 8 6 | 25 |(gdb) layout example5 7 | 26 |(gdb) 8 | 27 | 9 | 28 | 10 | 29 | 11 | 30 | 12 | 31 | 13 | 32 | 14 | 33 | 15 | 34 | 16 | 35 | 17 | 36 | 18 | 37 | 19 | 38 | 20 | 39 | 21 | 40 | 22 +--------------------------------------+ 23 exec No process In: L?? PC: ?? ... and after: ... Screen Dump (size 80 columns x 24 rows, cursor at column 6, row 16): 0 +-tui-layout.c-----------------------------------------------------------------+ 1 | 20 { | 2 | 21 return 0; | 3 | 22 } | 4 | 23 | 5 | 24 | 6 | 25 | 7 | 26 | 8 | 27 | 9 | 28 | 10 | 29 | 11 | 30 | 12 | 31 | 13 | 32 | 14 +------------------------------------------------------------------------------+ 15 exec No process In: L?? PC: ?? 16 (gdb) 17 18 19 20 21 22 23 ... The Term::command "layout src" is waiting to match: - "(gdb) layout src", and then - "(gdb) ". The first part fails to match on a line: ... | 26 |(gdb) layout src ... because it expects the prompt at the start of the line. Fix this by allowing the prompt at the start of a window as well. Tested by x86_64-linux. 2023-04-25 Tom de Vries [gdb/testsuite] Fix timeout in gdb.tui/main.exp With test-case gdb.tui/main.exp we run into: ... WARNING: timeout in accept_gdb_output PASS: gdb.tui/main.exp: show main after file ... The problem is that this command: ... Term::command "file [standard_output_file $testfile]" ... tries to match "(gdb) $cmd", but due to the long file name, $cmd is split up over two lines: ... 16 (gdb) file /data/vries/gdb/leap-15-4/build/gdb/testsuite/outputs/gdb.tui/main/ma 17 in 18 Reading symbols from /data/vries/gdb/leap-15-4/build/gdb/testsuite/outputs/gdb.t 19 ui/main/main... 20 (gdb) ... Fix this by matching "Reading symbols from" instead. Tested on x86_64-linux. 2023-04-25 Tom de Vries [gdb/testsuite] Fix timeout in gdb.tui/corefile-run.exp With test-case gdb.tui/corefile-run.exp we run into: ... WARNING: timeout in accept_gdb_output PASS: gdb.tui/corefile-run.exp: load corefile ... The timeout happens in this command: ... Term::command "core-file $core" ... because it tries to match "(gdb) $cmd" but $cmd is split over two lines: ... 16 (gdb) core-file /data/vries/gdb/leap-15-4/build/gdb/testsuite/outputs/gdb.tui/co 17 refile-run/corefile-run.core 18 [New LWP 5370] 19 Core was generated by `/data/vries/gdb/leap-15-4/build/gdb/testsuite/outputs/gdb 20 .tui/corefile-run/coref'. 21 Program terminated with signal SIGTRAP, Trace/breakpoint trap. 22 #0 main () at tui-layout.c:21 23 (gdb) ... Fix this by using send_gdb "$cmd\n" and wait_for "Program terminated" instead. Tested on x86_64-linux. 2023-04-25 Tom de Vries [gdb/testsuite] Add debug prints in Term::wait_for The semantics of wait_for are non-trivial, and a bit hard to understand sometimes. Add some debug prints in wait_for that make it clear: - what regexps we're trying to match, - what strings we compare to the regexps, and - whether there's a match or mismatch. I've added this ad-hoc a couple of times, and it seems that it's worth having readily available. The debug prints are enabled by adding DEBUG_TUI_MATCHING=1 to the RUNTESTFLAGS: ... $ make check RUNTESTFLAGS="gdb.tui/empty.exp DEBUG_TUI_MATCHING=1" ... Tested on x86_64-linux. 2023-04-25 Tom de Vries [gdb/testsuite] Add warning for timeout in accept_gdb_output In accept_gdb_output we have: ... timeout { # Assume a timeout means we somehow missed the # expected result, and carry on. return 0 } ... The timeout is silent, and though in some places the return value is checked, this is not done consistently, and consequently there are silent timeouts when running the TUI testsuite (gdb.tui/*.exp and gdb.python/tui*.exp). Each timeout is 10 seconds, and there are 5 in total in the TUI tests, taking 50 seconds overall: ... real 1m0.275s user 0m10.440s sys 0m1.343s ... With an entire testsuite run taking about 30 minutes, that is about 2.5% of the time spent waiting in TUI tests. Let's make the timeouts visible using a warning, such that they can be fixed. Tested on x86_64-linux. 2023-04-25 GDB Administrator Automatic date update in version.in 2023-04-24 Tom de Vries [gdb/testsuite] Fix auto-indent in gdb.gdb/python-helper.exp When editing gdb.gdb/python-helper.exp, auto-indent is broken in my editor (emacs). The problem is that this: ... if { 1 } { foo "{" "}"bar } ... produces this: ... if { 1 } { foo "{" "}" bar } ... Note that this doesn't happen for "{}". Fix this by using "\{" and "\}". Tested on x86_64-linux. 2023-04-24 Tom de Vries [gdb/testsuite] Fix gdb.gdb/python-helper.exp with -O2 -flto On openSUSE Leap 15.4, with gcc 7.5.0, when building gdb with -O2 -g -flto=auto, I run into: ... FAIL: gdb.gdb/python-helper.exp: hit breakpoint in outer gdb FAIL: gdb.gdb/python-helper.exp: print integer from DWARF info FAIL: gdb.gdb/python-helper.exp: print *type->main_type ... Fix the first two FAILs by using $bkptno_numopt_re. The last FAIL is due to: ... (outer-gdb) print *type->main_type^M A syntax error in expression, near `->main_type'.^M (outer-gdb) FAIL: gdb.gdb/python-helper.exp: print *type->main_type ... because: ... (outer-gdb) print type^M Attempt to use a type name as an expression^M ... Fix this by making the test unresolved if "print type" or "print type->main_type" doesn't succeed. On openSUSE Tumbleweed, with gcc 13.0.1, when building gdb with -O2 -g -flto=auto, I run into timeouts due to the breakpoint in c_print_type not hitting. Fix this by detecting the situation and bailing out. Tested on x86_64-linux. 2023-04-24 Tom de Vries [gdb/testsuite] Fix -wrap in presence of -prompt in gdb_test_multiple While writing a gdb_test_multiple call in a test-case I tried to use -wrap in combination with -prompt and found out that it doesn't work, because -wrap uses "$gdb_prompt $" instead of $prompt_regexp. Fix this by making -wrap use $prompt_regexp. Tested on x86_64-linux. 2023-04-24 Simon Marchi gdb: remove end_stepping_range observable I noticed that this observable was never notified, which means we can probably safely remove it. The notification was removed in: commit 243a925328f8e3184b2356bee497181049c0174f Author: Pedro Alves Date: Wed Sep 9 18:23:24 2015 +0100 Replace "struct continuation" mechanism by something more extensible print_end_stepping_range_reason in turn becomes unused, so remote it as well. Change-Id: If5da5149276c282d2540097c8c4327ce0f70431a 2023-04-24 Tom de Vries [gdb/testsuite] Use -std=gnu99 for gdb.server/attach-flag.exp When using a compiler defaulting to -std=gnu90, we run into: ... Running gdb.server/attach-flag.exp ... gdb compile failed, attach-flag.c: In function 'main': attach-flag.c:22:3: error: 'for' loop initial declarations are only allowed \ in C99 or C11 mode for (int i = 0; i < NTHREADS; i++) ^~~ attach-flag.c:22:3: note: use option -std=c99, -std=gnu99, -std=c11 or \ -std=gnu11 to compile your code ... Fix this by using -std=gnu99. Tested on x86_64-linux. 2023-04-24 Tom de Vries [gdb/testsuite] Require GCC >= 5.x.x in gdb.base/utf8-identifiers.exp Test-case gdb.base/utf8-identifiers.exp compiles starting with GCC 5, so require this. Tested on x86_64-linux. 2023-04-24 Tom de Vries [gdb/testsuite] Fix gdb.multi/multi-arch.exp on powerpc64le When running test-case gdb.multi/multi-arch.exp on powerpc64le-linux, I run into: ... Running gdb/testsuite/gdb.multi/multi-arch.exp ... gdb compile failed, In file included from /usr/include/features.h:399:0, from /usr/include/stdio.h:27, from gdb/testsuite/gdb.multi/hangout.c:18: /usr/include/gnu/stubs.h:8:27: fatal error: gnu/stubs-32.h: \ No such file or directory # include ^ compilation terminated. ... The problem is that the test-case attempts to use gcc -m32 to produce an executable while that's not available. Fix this by: - introduce a new caching proc have_compile_and_link_flag, and - using have_compile_and_link_flag in test-case gdb.multi/multi-arch.exp. Tested on: - x86_64-linux (openSUSE Leap 15.4), and - powerpc64le-linux (CentOS-7). 2023-04-24 Tom de Vries [gdb/testsuite] Add basic lmap for tcl < 8.6 With test-case gdb.dwarf2/dw2-abs-hi-pc.exp and tcl 8.5, I run into: ... ERROR: tcl error sourcing gdb/testsuite/gdb.dwarf2/dw2-abs-hi-pc.exp. ERROR: invalid command name "lmap" while executing "::gdb_tcl_unknown lmap i {dw2-abs-hi-pc.c dw2-abs-hi-pc-hello.c \ dw2-abs-hi-pc-world.c} { expr { "$srcdir/$subdir/$i" } }" ... Fix this by adding basic lmap support for tcl version < 8.6. Tested on x86_64-linux. 2023-04-24 Tom de Vries [gdb/testsuite] Don't use string cat in gdb.dwarf2/dw2-abs-hi-pc.exp Test-case gdb.dwarf2/dw2-abs-hi-pc.exp uses string cat: ... set sources [lmap i $sources { string cat "${srcdir}/${subdir}/" $i }] ... but that's only supported starting tcl 8.6. Fix this by using "expr" instead: ... set sources [lmap i $sources { expr { "$srcdir/$subdir/$i" } }] ... Tested on x86_64-linux. 2023-04-24 Nick Clifton New georgian translation for the bfd sub-directory 2023-04-24 Alan Modra Revert "x86: work around compiler diagnosing dangling pointer" This reverts commit 983db9932a302f9e2ae1f1d4fd7c3149560bc269. 2023-04-24 Alan Modra gcc-13 i386-dis.c warning opcodes/i386-dis.c: In function ‘print_insn’: opcodes/i386-dis.c:9865:22: error: storing the address of local variable ‘priv’ in ‘*info.private_data’ [-Werror=dangling-pointer=] * i386-dis.c (print_insn): Clear info->private_data before returning. 2023-04-24 Alan Modra asan: segfault in coff_mangle_symbols The testcase managed to trigger creation of a wild pointer in coff_slurp_symbol_table. Stop that happening, and fix an unrelated problem I happened to see in bfd_coff_get_syment. * coff-bfd.c (bfd_coff_get_syment): Clear fix_value after converting n_value from a pointer to an index. * coffcode.h (coff_slurp_symbol_table ): Sanity check symbol value before converting to a pointer. 2023-04-24 Alan Modra objcopy of archives tidy This makes sure the input element bfd is closed before exiting the loop copying elements. * objcopy.c (copy_archive): Rename output_bfd to output_element. Localise last_element. Close this_element in more error cases. 2023-04-24 Tom de Vries [gdb/testsuite] Skip dap tests for tcl 8.5 When running the dap tests on a system with tcl 8.5, we run into: ... ERROR: tcl error sourcing gdb/testsuite/gdb.dap/memory.exp. ERROR: bad class "entier": must be alnum, alpha, ascii, control, boolean, \ digit, double, false, graph, integer, list, lower, print, punct, space, \ true, upper, wideinteger, wordchar, or xdigit while executing "string is entier $num" (procedure "num" line 16) invoked from within ... Fix this by: - requiring tcl 8.6 in allow_dap_tests, and - adding the missing require allow_dap_tests in gdb.dap/memory.exp. Tested on x86_64-linux. 2023-04-24 Jan Beulich x86: work around compiler diagnosing dangling pointer For quite come time print_insn() has been storing the address of a local variable into info->private_data. Since the compiler can't know that the field won't be accessed again after print_insn() returns, it may kind of legitimately diagnose this. And recent enough gcc does as of the introduction of the fetch_error() return paths (replacing setjmp()-based error handling). Utilizing that neither prefix_name() nor i386_dis_printf() actually use info->private_data, zap the pointer in fetch_error(), after having retrieved it for local use. 2023-04-24 GDB Administrator Automatic date update in version.in 2023-04-23 YunQiang Su MIPS: fix loongson3 llsc workaround -mfix-looongson3-llsc may add sync instructions not needed on some asm code with lots of debug info. PR: 30153 * gas/config/tc-mips.c(fix_loongson3_llsc): clear logistic. 2023-04-23 YunQiang Su MIPS: default output r6 obj if the triple is r6 If the triple is mipsisa32r6* or mipsisa64r6*, ld/as should output r6 objects by default. The triples with vendor `img` should do same. The examples include: as xx.s -o xx.o ld -r -b binary xx.dat -o xx.o 2023-04-23 YunQiang Su MIPS: support mips*64 as CPU and gnuabi64 as ABI For MIPS64r6 ports, Debian as an example, `mipsisa64r6el` is used as the cpu name in triple. Let's recognize them by `mips*64*(el)`. For 64bit Ports, like Debian's mips64el and mips64r6el ports, `gnuabi64` is used as the abi section. Let's use N64 abi by default for the triple with gnuabi64. 2023-04-23 mengqinggang LoongArch: Fix loongarch32 test fails Regenerated macro_op_32.d and add skip loongarch64-*-*. gas/ChangeLog: * testsuite/gas/loongarch/macro_op_32.d: Regenerated. ld/ChangeLog: * testsuite/ld-loongarch-elf/macro_op_32.d: Regenerated. 2023-04-23 GDB Administrator Automatic date update in version.in 2023-04-22 Tom de Vries [gdb/testsuite] Remove debug prints in gdb_find_gdc When running the gdb.dlang test-cases, and forcing gdb_find_gdc to be used rather than dejagnu's copy (mimicing what happens with an older dejagnu without find_gdc), I run into these debug prints: ... Tool Root: /data/vries/gdb/leap-15-4/build CC: gdc ... Remove these. Tested on x86_64-linux. 2023-04-22 WANG Rui gdb: Fix false match issue in skip_prologue_using_linetable [ Changes in v2: - rebase on trunk Changes in v3: - add test-case ] We should exclude matches to the ending PC to prevent false matches with the next function, as prologue_end is located at the end PC. : 0x00: ... <-- start_pc 0x04: ... 0x08: ... <-- breakpoint 0x0c: ret : 0x10: ret <-- end_pc | prologue_end of fun2 Tested on x86_64-linux. Co-Authored-By: WANG Rui (fix, tiny change [1]) Co-Authored-By: Tom de Vries (test-case) Approved-by: Kevin Buettner [1] https://www.gnu.org/prep/maintain/html_node/Legally-Significant.html PR symtab/30369 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30369 2023-04-22 GDB Administrator Automatic date update in version.in 2023-04-21 Simon Marchi gdb: remove language_auto I think that the language_auto enumerator and the auto_language class can be removed. There isn't really an "auto" language, it's only a construct of the "set language" command to say "pick the appropriate language automatically". But "auto" is never the current language. The `current_language` points to the current effective language, and the fact that we're in "auto language" mode is noted by the language_mode global. - Change set_language to handle the "auto" (and "local", which is a synonym) early, instead of in the for loop. I think it makes the two cases (auto vs explicit language) more clearly separated anyway. - Adjust add_set_language_command to hard-code the "auto" string, instead of using the "auto" language definition. - Remove auto_language, rename auto_or_unknown_language to unknown_language and move the bits of the existing unknown_language in there. - Remove the set_language at the end of _initialize_language. I think it's not needed, because we call set_language in gdb_init, after all _initialize functions are called. There is some chance that an _initialize function that runs after _initialize_language implicitly depends on current_language being set, but my testsuite runs haven't found anything like that. - Use language_unknown instead of language_auto when creating a minimal symbol (minimal_symbol_reader::record_full). I think that this value is used to indicate that we don't know the symbol of the minimal symbol (yet), so language_unknown makes sense to me. Update a condition accordingly in ada-lang.c. symbol_find_demangled_name also appears to "normalize" this value from "unknown" to "auto", remove that part and update the condition to just check for language_unknown. Change-Id: I47bcd6c15f607d9818f2e6e413053c2dc8ec5034 Reviewed-By: Tom Tromey 2023-04-21 Simon Marchi gdb: switch "set language" to getter/setter The `language` global variable is mostly a scratch variable used for the setting. The source of truth is really current_language and language_mode (auto vs manual), which are set by the set_language_command callback. Switch the setting to use the add_setshow_enum_cmd overload that takes a value getter and setter. Change-Id: Ief5b2f93fd7337eed7ec96023639ae3dfe62250b Reviewed-By: Tom Tromey 2023-04-21 Simon Marchi gdb: remove return value of set_language set_language returns the previous language, but nothing uses it. Remove the return value. This lets us remove the assignment to current_language, in _initialize_language. Change-Id: Ifccf9b488434c1addf4626130a74e159a37d8c17 Reviewed-By: Tom Tromey 2023-04-21 Tom de Vries [gdb/testsuite] Add make-check-all.sh Directory gdb/testsuite/boards contains a number of host/target boards, which run a test-case (or test-cases) in a different way. The benefits of using these boards are: - improving test coverage of gdb, - making the testsuite more robust, and - making sure the test-cases work for non-native and remote setups, if possible. Each board is slightly different, and developers need to learn how to use each one, what parameters to pass and how, and which ones can be used in combination with each other. This is a threshold to start using them. And then there quite a few, so I suppose typically only a few will be used by each developer. Add script gdb/testsuite/make-check-all.sh, that's intended to function as a drop-in replacement of make check, while excercising all host/target boards in gdb/testsuite/boards. An example of make-check-all.sh for one test-case is: ... $ ~/gdb/src/gdb/testsuite/make-check-all.sh gdb.base/advance.exp LOCAL: # of expected passes 8 TARGET BOARD: cc-with-gdb-index # of expected passes 8 ... HOST BOARD: local-remote-host-notty, TARGET BOARD: remote-stdio-gdbserver # of expected passes 8 HOST/TARGET BOARD: local-remote-host-native # of expected passes 8 ... Shell-checked and tested on x86_64-linux. Co-Authored-By: Simon Marchi Reviewed-By: Andrew Burgess 2023-04-21 Tom de Vries [gdb/cli] Add maint info screen While working on PRs tui/30337 and cli/30346 I came across various notions of width in gdb, as reported by gdb, readline, curses and the environment variables. As for gdb, readline and the environment variables, the way things work is: - Gdb asks readline to detect screen size, - readline sets the actual screen size in the environment variables COLUMNS and LINES, - readline reports back a screen size to gdb, which may have one column less than the actual screen size, to deal with lack of auto-wrap. This becomes gdb's notion of screen size (in other words the point where we can expect the gdb command line to wrap), - Gdb then explicitly sets readline's screen size, which readline itself may adjust to deal with lack of auto-wrap. This becomes readlines notion of screen size (well, internally the unadjusted one, but it'll report back the adjusted one). Add a command "maint info screen" that prints these notions, both for width and height. For TERM=xterm we have: ... $ TERM=xterm gdb -ex "maint info screen" Number of characters gdb thinks are in a line is 118. Number of characters readline reports are in a line is 118. Number of characters curses thinks are in a line is 118. Number of characters environment thinks are in a line is 118 (COLUMNS). Number of lines gdb thinks are in a page is 27. Number of lines readline reports are in a page is 27. Number of lines curses thinks are in a page is 27. Number of lines environment thinks are in a page is 27 (LINES). ... And for TERM=ansi: ... $ TERM=ansi gdb -ex "maint info screen" Number of characters gdb thinks are in a line is 117. Number of characters readline reports are in a line is 116. Number of characters curses thinks are in a line is 118. Number of characters environment thinks are in a line is 118 (COLUMNS). Number of lines gdb thinks are in a page is 27. Number of lines readline reports are in a page is 27. Number of lines curses thinks are in a page is 27. Number of lines environment thinks are in a page is 27 (LINES). ... [ The fact that we have "characters readline reports are in a line is 116" is is due to gdb making readline adjust twice for the lack of auto-wrap, this is PR cli/30346. Likewise we can detect tui/30337 by doing a resize in TUI mode and doing "maint info screen": ... Number of characters characters curses thinks are in a line is 110. Number of characters environment thinks are in a line is 111 (COLUMNS). ] And for TERM=ansi, with width and heigth set to 0: ... Number of characters gdb thinks are in a line is 4294967295 (unlimited). Number of characters readline reports are in a line is 32766 (unlimited - 1). Number of characters curses thinks are in a line is 118. Number of characters environment thinks are in a line is 118 (COLUMNS). Number of lines gdb thinks are in a page is 4294967295 (unlimited). Number of lines readline reports are in a page is 32767 (unlimited). Number of lines curses thinks are in a page is 27. Number of lines environment thinks are in a page is 27 (LINES). ... [ Note that when doing a resize by say maximizing or de-maximizing a terminal, all reported values are updated, except for curses when not in TUI mode. Maybe that means there's a bug. If not, then maybe we should not print the curses lines unless in TUI mode, or annotate those lines such that it's clear that the values may be not up-to-date. ] I'd like to use this command in the regression test for PR cli/30346. Tested on x86_64-linux. Reviewed-By: Eli Zaretskii Reviewed-By: Tom Tromey 2023-04-21 Tom Tromey Fix -Wmaybe-uninitialized warning in opcodes/i386-dis.c A recent change in opcodes/i386-dis.c caused a build failure on my x86-64 Fedora 36 system, which uses: $ gcc --version gcc (GCC) 12.2.1 20221121 (Red Hat 12.2.1-4) [...] The error is: ../../binutils-gdb/opcodes/i386-dis.c: In function ‘OP_J’: ../../binutils-gdb/opcodes/i386-dis.c:12705:22: error: ‘val’ may be used uninitialized [-Werror=maybe-uninitialized] 12705 | disp = val & 0x8000 ? val - 0x10000 : val; | ~~~~^~~~~~~~ This patch fixes the warning. opcodes/ChangeLog 2023-04-21 Tom Tromey * i386-dis.c (OP_J): Check result of get16. 2023-04-21 Tom Tromey Use entry values for 32-bit PPC struct return AdaCore has a local patch for PPC "finish", but last year, Ulrich Weigand pointed out that this patch was incorrect. It may work for simple functions like the one in the internal test, but nothing guarantees that r3 will be preserved by the callee, so checking r3 on exit is not always correct. This patch fixes the problem using the same approach as PPC64: use the entry value of r3, if available. Ulrich confirmed this matches the PPC32 ABI. 2023-04-21 Tom Tromey Handle erroneous DW_AT_call_return_pc On PPC64, with the test case included in an earlier patch, we found that "finish" would still not correctly find the return value via entry values. The issue is simple. The compiler emits: 0x00000000100032b8 <+28>: bl 0x1000320c 0x00000000100032bc <+32>: nop 0x00000000100032c0 <+36>: li r9,42 ... but the DWARF says: <162a> DW_AT_call_return_pc: 0x100032c0 That is, the declared return PC is one instruction past the actual return PC. This patch adds a new arch hook to handle this scenario, and implements it for PPC64. Some care is taken so that GDB will continue to work if this compiler bug is fixed. A GCC patch is here: https://gcc.gnu.org/pipermail/gcc-patches/2023-March/613336.html No check for 'nop' is done, as subsequent discussion revealed that the linker might replace this with another instruction. 2023-04-21 Tom Tromey Handle function descriptors in call_site_target call_site_target::iterate_over_addresses may look up a minimal symbol. On platforms like PPC64 that use function descriptors, this may find an unexpected address. The fix is to use gdbarch_convert_from_func_ptr_addr to convert from a function descriptor to the address recorded at the call site. I've added a new test case that is based on the internal AdaCore test that provoked this bug. However, I'm unable to test it as-is on PPC64. 2023-04-21 Jan Beulich x86: drop (explicit) BFD64 dependency from disassembler get64() is unreachable when !BFD64 (due to a check relatively early in print_insn()). Let's avoid the associated #ifdef-ary (or else we should extend it to remove more dead code). x86: drop use of setjmp() from disassembler With the longjmp() uses all gone, the setjmp() isn't necessary anymore either. 2023-04-21 Jan Beulich x86: change fetch error handling for get() Make them return boolean and convert FETCH_DATA() uses to fetch_code(). With this no further users of FETCH_DATA() remain, so the macro and its backing function are dropped as well. Leave value types as they were for the helper functions, even if I don't think that beyond get64() use of bfd_{,signed_}vma is really necessary. With type change of "disp" in OP_E_memory(), change the 2nd parameter of print_displacement() to a signed type as well, though (eliminating the need for a local variable of signed type). This also eliminates the need for custom printing of '-' in Intel syntax displacement expressions. While there drop forward declarations which aren't really needed. 2023-04-21 Jan Beulich x86: change fetch error handling when processing operands Make the handler functions all return boolean and convert FETCH_DATA() uses to fetch_code(). x86: change fetch error handling in get_valid_dis386() Introduce a special error indicator node, for the sole (real) caller to recognize and act upon. x86: change fetch error handling in ckprefix() Use a tristate (enum) return value type to be able to express all three cases which are of interest to the (sole) caller. This also allows doing away with the abuse of "rex_used". 2023-04-21 Jan Beulich x86: change fetch error handling in top-level function ... and its direct helper get_sib(). Using setjmp()/longjmp() for fetch error handling is problematic, as per https://sourceware.org/pipermail/binutils/2023-March/126687.html. Start using more conventional error handling instead. Also introduce a fetch_modrm() helper, for subsequent re-use. 2023-04-21 Jan Beulich x86: move fetch error handling into a helper function ... such that it can be used from other than the setjmp() error handling path. Since I'd like the function's parameter to be pointer-to-const, two other functions need respective constification then, too (along with needing to be forward-declared). 2023-04-21 Jan Beulich bfd: fix STRICT_PE_FORMAT build A semicolon was missing and "name" needs to be pointer-to-const. While adding "const" there, also add it for "sec". 2023-04-21 Lifang Xia RISC-V: Optimize relaxation of gp with max_alignment. This should be the first related issue, which posted in riscv-gnu-toolchain, https://github.com/riscv-collab/riscv-gnu-toolchain/issues/497 If the output sections are not between gp and the symbol, then their alignments shouldn't affect the gp relaxation. However, this patch improves this idea even more, it limits the range to the gp+-2k, which means only the output section which are in the [gp-2K, gp+2K) range need to be considered. Even if the output section candidates may be different for each relax passes, the symbol that can be relaxed ar this round will not be truncated at next round. That is because this round you can do relaxation which means that the section where the symbol is located is within the [gp-2K, gp+2K) range, so all the output section alignments between them should be considered. In other words, if the alignments between them may cause truncated, then we should already preserve the size and won't do the gp relaxation this time. This patch can resolve the github issue which mentioned above, and also passed all gcc/binutils regressions of riscv-gnu-toolchain, so should be worth and safe enough to commit. Originally, this patch also do the same optimization for the call relaxations, https://sourceware.org/pipermail/binutils/2022-October/123918.html But just in case there is something that has not been considered, we only deal with the gp relaxation at this time. bfd/ * elfnn-riscv.c (riscv_elf_link_hash_table): Added new bfd_vma, max_alignment_for_gp. It is used to record the maximum alignment of the output sections, which are in the [gp-2K, gp+2k) range. (riscv_elf_link_hash_table_create): Init max_alignment_for_gp to -1. (_bfd_riscv_get_max_alignment): Added new parameter, gp. If gp is zero, then all the output section alignments are possible candidates; Otherwise, only the output sections which are in the [gp-2K, gp+2K) range need to be considered. (_bfd_riscv_relax_lui): Called _bfd_riscv_get_max_alignment with the non-zero gp if the max_alignment_for_gp is -1. (_bfd_riscv_relax_pc): Likewise. (_bfd_riscv_relax_section): Record the first input section, so that we can reset the max_alignment_for_gp for each repeated relax passes. ld/ * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated. * testsuite/ld-riscv-elf/relax-max-align-gp.*: New testcase. It fails without this patch. 2023-04-21 Jan Beulich ld: add missing period after @xref At least older versions of one of the doc generation tools complain (warn) about it missing. 2023-04-21 Alan Modra Keeping track of rs6000-coff archive element pointers rs6000-coff archives use a linked list of file offsets, where each element points to the next element. The idea is to allow updating of large archives quickly without rewriting the whole archive. (binutils ar does not do this.) Unfortunately this is an easy target for fuzzers to create an archive that will cause ar or any other tool processing archives to hang. I'd implemented guards against pointing back to the previous element, but of course that didn't last long. So this patch implements a scheme to keep track of file offset ranges used by elements as _bfd_read_ar_hdr is called for each element. See the add_range function comment. I needed a place to stash the list, so chose the obvious artdata.tdata backend extension to archive's tdata, already used by xcoff. That involved a little cleanup, because while it would be possible to continue using different artdata.tdata for the big and small archives, it's nicer to use a union. If anyone is concerned this list of element ranges might grow large and thus significantly slow down the tools, adjacent ranges are merged. In fact something like "ar t" will only ever have one range on xcoff archives generated by binutils/ar. I agree there might still be a problem with ld random element access via the armap. include/ * coff/xcoff.h (SIZEOF_AR_FILE_HDR): Use sizeof. (SIZEOF_AR_FILE_HDR_BIG, SIZEOF_AR_HDR, SIZEOF_AR_HDR_BIG): Likewise. (struct ar_ranges, struct xcoff_artdata): New. (x_artdata): Define. (xcoff_big_format_p): Rewrite. (xcoff_ardata, xcoff_ardata_big): Delete. bfd/ * coff-rs6000.c: Replace uses of xcoff_ardata and xcoff_ardata_big throughout file. (_bfd_xcoff_archive_p): Adjust artdata.tdata allocation. (add_range): New function. (_bfd_xcoff_read_ar_hdr): Use it here. Fix memory leak. (_bfd_xcoff_openr_next_archived_file): Remove old sanity checks. Set up range for header. (xcoff_write_archive_contents_old): Make the temporary artdata.tdata used here to pass info down to _bfd_compute_and_write_armap a struct xcoff_artdata. (xcoff_write_archive_contents_big): Likewise. * coff64-rs6000.c: Replace uses of xcoff_ardata and xcoff_ardata_big throughout file. (xcoff64_archive_p): Adjust artdata.tdata allocation. 2023-04-21 Alan Modra Delete struct artdata archive_head This element is unused. Ideally we'd be moving archive_head and other archive specific fields from struct bfd to here, but that's a much larger change than this little bit of cleanup. * libbfd-in.h (struct artdata): Delete archive_head. * libbfd.h: Regenerate. * archive.c, * coff-rs6000.c, * coff64-rs6000.c: Delete comments mentioning artdata archive_head. 2023-04-21 GDB Administrator Automatic date update in version.in 2023-04-20 Nick Clifton Add a SECURITY.txt file describing the GNU Binutils' project's stance on security related bugs. 2023-04-20 Jan Beulich x86: adjust an ILP32 testcase using .insn In commit 6967633c8b49 ("x86: convert testcases to use .insn") an ILP32 clone of a testcase was missed in the set of tests needing --divide added. Reported-by: Clément Chigot 2023-04-20 GDB Administrator Automatic date update in version.in 2023-04-20 Alan Modra sh4-linux segfaults running ld testsuite Segmentation fault FAIL: pr22269-1 (static pie undefined weak) and others running "visibility (hidden undef)" tests No code has any right to access bfd_link_hash_entry u.def without first checking the type, and SYMBOL_REFERENCES_LOCAL isn't sufficient. * elf32-sh.c (sh_elf_finish_dynamic_symbol): Don't use relative relocs in GOT unless symbol is defined. 2023-04-20 Alan Modra PR30343 infrastructure Make ldemul_before_plugin_all_symbols_read more useful. * ldlang.c (lang_process): Move call to ldemul_before_plugin_all_symbols_read outside BFD_SUPPORTS_PLUGINS. Allow backends to add to gc_sym_list before handling entry sym. * ldelf.c (ldelf_before_plugin_all_symbols_read): Test lto_plugin_active. 2023-04-20 Alan Modra ubsan: signed integer overflow in display_debug_lines_raw This one was caused by me unnecessarily promoting an "int adv" to "int64_t adv". The expression overflowing was 4259 + 9223372036854775807 with the left number being unsigned int. * dwarf.h (DWARF2_Internal_LineInfo): Replace unsigned short with uint16_t and unsigned char with uint8_t. Make li_line_base an int8_t. * dwarf.c (display_debug_lines_raw): Revert "adv" back to an int. 2023-04-20 Alan Modra Yet another out-of-memory fuzzed object Do I care about out of memory conditions triggered by fuzzers? Not much. Your operating system ought to be able to handle it by killing the memory hog. Oh well, this one was an element of a coff-alpha archive that said it was a little less that 2**64 in size. The coff-alpha compression scheme expands at most 8 times, so we can do better in bfd_get_file_size. * bfdio.c (bfd_get_file_size): Assume elements in compressed archive can only expand a maximum of eight times. * coffgen.c (_bfd_coff_get_external_symbols): Sanity check size of symbol table agains file size. 2023-04-20 Alan Modra buffer overflow in print_symname * ecoff.c (_bfd_ecoff_slurp_symbolic_info): Zero terminate string sections. 2023-04-19 Indu Bhagat libsframe: minor formatting fixes in sframe_encoder_write_fre libsframe/ * sframe.c (sframe_encoder_write_fre): Formatting fixes for readability. libsframe: use consistent function argument names libsframe/ * sframe.c (sframe_decoder_get_header): Use consistent function arg names. (sframe_decoder_free): Likewise. (sframe_encode): Use more appropriate var name. 2023-04-19 Indu Bhagat sframe: correct some typos include/ * sframe.h: Correct a typo. libsframe/ * sframe.c: Likewise. 2023-04-19 Indu Bhagat libsframe: use return type of bool for predicate functions libsframe/ * sframe.c (sframe_header_sanity_check_p): Change return type to bool. (sframe_fre_sanity_check_p): Likewise. gas: sframe: fix comment gas: sframe: use ATTRIBUTE_UNUSED consistently gas/ * gen-sframe.c (sframe_set_version): Use ATTRIBUTE_UNUSED consistently. (output_sframe): Likewise. (sframe_set_fre_info): Remove the usage of ATTRIBUTE_UNUSED. 2023-04-19 Tom Tromey Remove adjust_type_signedness I happened across adjust_type_signedness, which may be used to modify a type when printing an Ada value. Modifying a type like this is a bad idea -- they should normally be considered immutable. Removing this function still passes both the dejagnu and internal AdaCore tests, though, so this patch drops it. As this was reviewed internally, and only affect Ada, I am checking it in. 2023-04-19 Nick Clifton Fix: readelf: loc_offset XX too big PR 30355 * dwarf.c (read_and_display_attr_value): Correctly handle DW_loclistx attributes that index a version 5 .debug_loclists section. 2023-04-19 Jan Beulich gas: document that get_symbol_name() can clobber the input buffer Callers which want to make further parsing attempts at the buffer passed to the function need to be aware that due to the potential of string concatenation the input buffer may be altered in ways beyond what can be undone by putting back at *input_line_pointer the character that the function returns. 2023-04-19 Jan Beulich x86: parse_register() must not alter the parsed string This reverts the code change done by 100f993c53a5 ("x86: Check unbalanced braces in memory reference"), which wrongly identified e87fb6a6d0cd ("x86/gas: support quoted address scale factor in AT&T syntax") as the root cause of PR gas/30248. (The testcase is left in place, no matter that it's at best marginally useful in that shape.) The problem instead is that parse_register() alters the string handed to it, thus breaking valid assumptions in subsequent parsing code. Since the function's behavior is a result of get_symbol_name()'s, make a copy of the incoming string before invoking that function. Like for parse_real_register() follow the model of strtol() et al: input string is const-qualified to signal that the string isn't altered, but the returned "end" pointer is not const-qualified, requiring const to be cast away (which generally is a bad idea, but the alternative would again be more convoluted code). 2023-04-19 Jan Beulich x86: parse_real_register() does not alter the parsed string Follow the model of strtol() et al - input string is const-qualified to signal that the string isn't altered, but the returned "end" pointer is not const-qualified, requiring const to be cast away (which generally is a bad idea, but the alternative would be more convoluted code). 2023-04-19 Nick Clifton Updated Hungarian translation for the gprof directory 2023-04-19 GDB Administrator Automatic date update in version.in 2023-04-18 Simon Marchi gdb: re-format Python code with black 23 Change-Id: I849d10d69c254342bf01e955ffe62a2b60f9de4b 2023-04-18 Carl Love PowerPC: fix _Float128 type output string PowerPC supports two 128-bit floating point formats, the IBM long double and IEEE 128-bit float. The issue is the DWARF information does not distinguish between the two. There have been proposals of how to extend the DWARF information as discussed in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=104194 but has not been fully implemented. GCC introduced the _Float128 internal type as a work around for the issue. The workaround is not transparent to GDB. The internal _Float128 type name is printed rather then the user specified long double type. This patch adds a new gdbarch method to allow PowerPC to detect the GCC workaround. The workaround checks for "_Float128" name when reading the base typedef from the die_info. If the workaround is detected, the type and format fields from the _Float128 typedef are copied to the long double typedef. The same is done for the complex long double typedef. This patch fixes 74 regression test failures in gdb.base/whatis-ptype-typedefs.exp on PowerPC with IEEE float 128 as the default on GCC. It fixes one regression test failure in gdb.base/complex-parts.exp. The patch has been tested on Power 10 where GCC defaults to IEEE Float 128-bit and on Power 10 where GCC defaults to the IBM 128-bit float. The patch as also been tested on X86-64 with no new regression failures. 2023-04-18 mengqinggang Symbols with GOT relocatios do not fix adjustbale gas * config/tc-loongarch.c (loongarch_fix_adjustable): Symbols with GOT relocatios do not fix adjustbale. * testsuite/gas/loongarch/macro_op_large_abs.d: Regenerated. * testsuite/gas/loongarch/macro_op_large_pc.d: Regenerated. ld * testsuite/ld-loongarch-elf/macro_op.d: Regenerated. - 2023-04-18 Thomas Koenig Assembler Internal Docs: Describe handling of opcodes for relaxation a bit better. 2023-04-18 Kito Cheng RISC-V: Cache the latest mapping symbol and its boundary. This issue was reported from https://github.com/riscv-collab/riscv-gnu-toolchain/issues/1188 Current flow: 1) Scan any mapping symbol less than this instruciton. 2) If not found, did a backward search. The flow seems not big issue, let run an example here: $x: 0x0 a <--- Found at step 1 0x4 b <--- Not found in step 1, but found at step 2 0x8 c <--- Not found in step 1, but found at step 2 $d 0x12 .word 1234 <-- Found at step 1 The instruciton didn't have the same address with mapping symbol will still did backward search again and again. So the new flow is: 1) Use the last mapping symbol status if the address is still within the range of the current mapping symbol. 2) Scan any mapping symbol less than this instruciton. 3) If not found, did a backward search. 4) If a proper mapping symbol is found in either step 2 or 3, find its boundary, and cache that. Use the same example to run the new flow again: $x: 0x0 a <--- Found at step 2, the boundary is 0x12 0x4 b <--- Cache hit at step 1, within the boundary. 0x8 c <--- Cache hit at step 1, within the boundary. $d 0x12 .word 1234 <-- Found at step 2, the boundary is the end of section. The disassemble time of the test cases has been reduced from ~20 minutes to ~4 seconds. opcode/ChangeLog PR 30282 * riscv-dis.c (last_map_symbol_boundary): New. (last_map_state): New. (last_map_section): New. (riscv_search_mapping_symbol): Cache the result of latest mapping symbol. 2023-04-18 Alan Modra objdump use of uninitialised value in pr_string_field PR 30365 * rdcoff.c (parse_coff_struct_type): Leave bitsize zero when no auxents. objdump buffer overflow in fetch_indexed_string PR 30361 * dwarf.c (fetch_indexed_string): Sanity check string index. 2023-04-18 GDB Administrator Automatic date update in version.in 2023-04-17 Vladimir Mezentsev gprofng: 30360 Seg. Fault when application uses std::thread We interpose a lot of libC functions (dlopen, fork, pthread_create, etc.). Some of these functions have versions. For example, % nm -D /lib64/gprofng/libgp-collector.so | grep thread_create@ | sort 000000000004b420 T pthread_create@GLIBC_2.34 000000000004b490 T pthread_create@GLIBC_2.17 000000000004b500 T pthread_create@GLIBC_2.2.5 000000000004b570 T pthread_create@GLIBC_2.1 000000000004b5e0 T pthread_create@GLIBC_2.0 Our library does not set the default version for symbols. This is correct because we don't know which libC will be used. gcc and g++ links differently the version symbols when the default version is not set. c-linker is using our pthread_create@GLIBC_2.34 and c++-linker is using our pthread_create@GLIBC_2.0 by default. The current implementation of the interposed functions is: If we are in our pthread_create@GLIBC_, we use dlvsym (dlflag, "pthread_create", "GLIBC_") to find and call the same function from libC. In the test from PR 30360, pthread_create@GLIBC_2.0 is not in the current libC. We need to call the default version symbol from libC. gprofng/ChangeLog 2023-04-16 Vladimir Mezentsev PR gprofng/30360 * libcollector/iotrace.c: Find and call a default libC version symbol. * libcollector/dispatcher.c: Likewise. * libcollector/iotrace.c: Likewise. * libcollector/linetrace.c: Likewise. * libcollector/mmaptrace.c: Likewise. * libcollector/synctrace.c: Likewise. * libcollector/collector.h (REAL_DCL): Remove an unused argument. 2023-04-17 Vladimir Mezentsev gprofng: Update documentation This patch addresses bugzilla 29521: Bug 29521 - [docs] man pages are not in the release tarball The dependence on help2man to create the man pages has been eliminated. All man pages are now written in Texinfo. Texi2pod and pod2man are used to generate the man pages from the source. The user guide has been significantly expanded. It also includes all the man pages. These are formatted appropriately in the INFO, PDF, and HTML formats. The index in the user guide has been enhanced to include an overview of all options and commands that have been documented so far. The work on the documentation has not been completed, but this is a significant step forward. gprofng/ChangeLog 2023-04-15 Vladimir Mezentsev PR gprofng/29521 * doc/Makefile.am: Build documentation. * doc/gprofng.texi: Update documentation. * doc/version.texi: Likewise. * src/Makefile.am: Move the man pages generation to doc/Makefile.am. * gp-display-html/Makefile.am: Likewise. * doc/gp-archive.texi: New file. * doc/gp-collect-app.texi: New file. * doc/gp-display-html.texi: New file. * doc/gp-display-src.texi: New file. * doc/gp-display-text.texi: New file. * doc/gp-macros.texi: New file. * doc/gprofng_ug.texi: New file. * doc/Makefile.in: Rebuild. * gp-display-html/Makefile.in: Rebuild. * src/Makefile.in" Rebuild. 2023-04-17 Tom Tromey Remove some unnecessary casts from ada-lang.c I noticed some unnecessary casts to LONGEST in ada-lang.c. This patch removes the ones I think are very clearly not needed. I'm checking this in as obvious. 2023-04-17 Simon Marchi gdb/amdgpu: add follow fork and exec support Prior to this patch, it's not possible for GDB to debug GPU code in fork children or after an exec. The amd-dbgapi target attaches to processes when an inferior appears due to a "run" or "attach" command, but not after a fork or exec. This patch adds support for that, such that it's possible to for an inferior to fork and for GDB to debug the GPU code in the child. To achieve that, use the inferior_forked and inferior_execd observers. In the case of fork, we have nothing to do if `child_inf` is nullptr, meaning that GDB won't debug the child. We also don't attach if the inferior has vforked. We are already attached to the parent's address space, which is shared with the child, so trying to attach would cause problems. And anyway, the inferior can't do anything other than exec or exit, it certainly won't start GPU kernels before exec'ing. In the case of exec, we detach from the exec'ing inferior and attach to the following inferior. This works regardless of whether they are the same or not. If they are the same, meaning the execution continues in the existing inferior, we need to do a detach/attach anyway, as amd-dbgapi needs to be aware of the new address space created by the exec. Note that we use observers and not target_ops::follow_{fork,exec} here. When the amd-dbgapi target is compiled in, it will attach (in the amd_dbgapi_process_attach sense, not the ptrace sense) to native inferiors when they appear, but won't push itself on the inferior's target stack just yet. It only pushes itself if the inferior initializes the ROCm runtime. So, if a non-GPU-using inferior calls fork, an amd_dbgapi_target::follow_fork method would not get called. Same for exec. A previous version of the code had the amd-dbgapi target pushed all the time, in which case we could use the target methods. But we prefer having the target pushed only when necessary, it's less intrusive when doing native debugging that doesn't involve the GPU. Change-Id: I5819c151c371120da8bab2fa9cbfa8769ba1d6f9 Reviewed-By: Pedro Alves 2023-04-17 Simon Marchi gdb: switch to right inferior in fetch_inferior_event The problem explained and fixed in the previous patch could have also been fixed by this patch. But I think it's good change anyhow, that could prevent future bugs, so here it is. fetch_inferior_event switches to an arbitrary (in practice, the first) inferior of the process target of the inferior used to fetch the event. The idea is that the event handling code will need to do some target calls, so we want to switch to an inferior that has target target. However, you can have two inferiors that share a process target, but with one inferior having an additional target on top: inf 1 inf 2 ----- ----- another target process target process target exec exec Let's say inferior 2 is selected by do_target_wait and returns an event that is really synthetized by "another target". This "another target" could be a thread or record stratum target (in the case explained by the previous patch, it was the arch stratum target, but it's because the amd-dbgapi abuses the arch layer). fetch_inferior_event will then switch to the first inferior with "process target", so inferior 1. handle_signal_stop then tries to fetch the thread's registers: ecs->event_thread->set_stop_pc (regcache_read_pc (get_thread_regcache (ecs->event_thread))); This will try to get the thread's register by calling into the current target stack, the stack of inferior 1. This is problematic because "another target" might have a special fetch_registers implementation. I think it would be a good idea to switch to the inferior for which the even was reported, not just some inferior of the same process target. This will ensure that any target call done before we eventually call context_switch will be done on the full target stack that reported the event. Not all events are associated to an inferior though. For instance, TARGET_WAITKIND_NO_RESUMED. In those cases, some targets return null_ptid, some return minus_one_ptid (ideally the expected return value should be clearly defined / documented). So, if the ptid returned is either of these, switch to an arbitrary inferior with that process target, as before. Change-Id: I1ffc8c1095125ab591d0dc79ea40025b1d7454af Reviewed-By: Pedro Alves 2023-04-17 Simon Marchi gdb: make regcache::raw_update switch to right inferior With the following patch, which teaches the amd-dbgapi target to handle inferiors that fork, we end up with target stacks in the following state, when an inferior that does not use the GPU forks an inferior that eventually uses the GPU. inf 1 inf 2 ----- ----- amd-dbgapi linux-nat linux-nat exec exec When a GPU thread from inferior 2 hits a breakpoint, the following sequence of events would happen, if it was not for the current patch. - we start with inferior 1 as current - do_target_wait_1 makes inferior 2 current, does a target_wait, which returns a stop event for an amd-dbgapi wave (thread). - do_target_wait's scoped_restore_current_thread restores inferior 1 as current - fetch_inferior_event calls switch_to_target_no_thread with linux-nat as the process target, since linux-nat is officially the process target of inferior 2. This makes inferior 1 the current inferior, as it's the first inferior with that target. - In handle_signal_stop, we have: ecs->event_thread->suspend.stop_pc = regcache_read_pc (get_thread_regcache (ecs->event_thread)); context_switch (ecs); regcache_read_pc executes while inferior 1 is still the current one (because it's before the `context_switch`). This is a problem, because the regcache is for a ptid managed by the amd-dbgapi target (e.g. (12345, 1, 1)), a ptid that does not make sense for the linux-nat target. The fetch_registers target call goes directly to the linux-nat target, which gets confused. - We would then get an error like: Couldn't get extended state status: No such process. ... since linux-nat tries to do a ptrace call on tid 1. GDB should switch to the inferior the ptid belongs to before doing the target call to fetch registers, to make sure the call hits the right target stack (it should be handled by the amd-dbgapi target in this case). In fact the following patch does this change, and it would be enough to fix this specific problem. However, I propose to change regcache to make it switch to the right inferior, if needed, before doing target calls. That makes the interface as a whole more independent of the global context. My first attempt at doing this was to find an inferior using the process stratum target and the ptid that regcache already knows about: gdb::optional restore_thread; inferior *inf = find_inferior_ptid (this->target (), this->ptid ()); if (inf != current_inferior ()) { restore_thread.emplace (); switch_to_inferior_no_thread (inf); } However, this caused some failures in fork-related tests and gdbserver boards. When we detach a fork child, we may create a regcache for the child, but there is no corresponding inferior. For instance, to restore the PC after a displaced step over the fork syscall. So find_inferior_ptid would return nullptr, and switch_to_inferior_no_thread would hit a failed assertion. So, this patch adds to regcache the information "the inferior to switch to to makes target calls". In typical cases, it will be the inferior that matches the regcache's ptid. But in some cases, like the detached fork child one, it will be another inferior (in this example, it will be the fork parent inferior). The problem that we witnessed was in regcache::raw_update specifically, but I looked for other regcache methods doing target calls, and added the same inferior switching code to raw_write too. In the regcache constructor and in get_thread_arch_aspace_regcache, "inf_for_target_calls" replaces the process_stratum_target parameter. We suppose that the process stratum target that would be passed otherwise is the same that is in inf_for_target_calls's target stack, so we don't need to pass both in parallel. The process stratum target is still used as a key in the `target_pid_ptid_regcache_map` map, but that's it. There is one spot that needs to be updated outside of the regcache code, which is the path that handles the "restore PC after a displaced step in a fork child we're about to detach" case mentioned above. regcache_test_data needs to be changed to include full-fledged mock contexts (because there now needs to be inferiors, not just targets). Change-Id: Id088569ce106e1f194d9ae7240ff436f11c5e123 Reviewed-By: Pedro Alves 2023-04-17 Simon Marchi gdb: add maybe_switch_inferior function Add the maybe_switch_inferior function, which ensures that the given inferior is the current one. Return an instantiated scoped_restore_current_thread object only we actually needed to switch inferior. Returning a scoped_restore_current_thread requires it to be move-constructible, so give it a move constructor. Change-Id: I1231037102ed6166f2530399e8257ad937fb0569 Reviewed-By: Pedro Alves 2023-04-17 Simon Marchi gdb: remove regcache::target The regcache class takes a process_stratum_target and then exposes it through regcache::target. But it doesn't use it itself, suggesting it doesn't really make sense to put it there. The only user of regcache::target is record_btrace_target::fetch_registers, but it might as well just get it from the current target stack. This simplifies a little bit a patch later in this series. Change-Id: I8878d875805681c77f469ac1a2bf3a508559a62d Reviewed-By: Pedro Alves 2023-04-17 Simon Marchi gdb: add inferior_forked observable In the upcoming patch to support fork in the amd-dbgapi target, the amd-dbgapi target will need to be notified of fork events through an observer, to attach itself (attach in the amd-dbgapi sense, not ptrace sense) to the new inferior / process. The reason that this can't be done through target_ops::follow_fork is that the amd-dbgapi target isn't pushed on the inferior's target stack right away. It attaches itself to the process and only pushes itself on its target stack if and when the inferior initializes the ROCm runtime. If an inferior that is not using the ROCm runtime forks, we want to be notified of it, so we can attach to the child, and catch if the child starts using the ROCm runtime. So, add a new observable and notify it in follow_fork_inferior. It will be used later in this series. Change-Id: I67fced5a9cba6d5da72b9c7ea1c8397644ca1d54 Reviewed-By: Pedro Alves 2023-04-17 Simon Marchi gdb: pass execing and following inferior to inferior_execd observers The upcoming patch to support exec in the amd-dbgapi target needs to detach amd-dbgapi from the inferior doing the exec and attach amd-dbgapi to the inferior continuing the execution. They may or may not be the same, depending on the `set follow-exec-mode` setting. But even if they are the same, we need to do the detach / attach dance. With the current observable signature, the observers only receive the inferior in which execution continues (the "following" inferior). Change the signature to pass both inferiors, and update all existing observers. Change-Id: I259d1ea09f70f43be739378d6023796f2fce2659 Reviewed-By: Pedro Alves 2023-04-17 Tom Tromey Add 128-bit integer support to the Ada parser This adds support for 128-bit integers to the Ada parser. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30188 2023-04-17 Tom Tromey Remove some Ada parser helper functions These helper functions in the Ada parser don't seem all that worthwhile to me, so this patch removes them. Add overload of fits_in_type This adds an overload of fits_in_type that accepts a gdb_mpz. A subsequent patch will use this. 2023-04-17 Tom Tromey Add 128-bit integer support to the Rust parser This adds support for 128-bit integers to the Rust parser. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=21185 2023-04-17 Tom Tromey Convert long_const_operation to use gdb_mpz This changes long_const_operation to use gdb_mpz for its storage. 2023-04-17 Tom Tromey Additions to gdb_mpz In preparation for adding more 128-bit support to gdb, a few additions to gdb_mpz are needed. First, this adds a new 'as_integer_truncate' method. This method works like 'as_integer' but does not require the value to fit in the target type -- it just truncates. Second, gdb_mpz::export_bits is changed to handle the somewhat unusual situation of zero-length types. This can happen for a Rust '()' type; but I think other languages have zero-bit integer types as well. Finally, this adds some operator== overloads. 2023-04-17 Nick Clifton Make the .rsrc section read only. PR 30142 * peXXigen.c (_bfd_XXi_swap_scnhdr_out): Do not force the .rsrc section to be writeable. * rescoff.c (write_coff_file): Add the SEC_READONLY flag to the .rsrc section. 2023-04-17 Tom de Vries [gdb/symtab] Handle empty file name in .debug_line section With DWARF 5, it's possible to produce an empty file name in the File Name Table of the .debug_line section: ... The File Name Table (offset 0x112, lines 1, columns 2): Entry Dir Name 0 1 (indirect line string, offset: 0x2d): ... Currently, when gdb reads an exec containing such debug info, it segfaults: ... Thread 1 "gdb" received signal SIGSEGV, Segmentation fault. 0x000000000072cd38 in dwarf2_start_subfile (cu=0x2badc50, fe=..., lh=...) at \ gdb/dwarf2/read.c:18716 18716 if (!IS_ABSOLUTE_PATH (filename) && dirname != NULL) ... because read_direct_string transforms "" into a nullptr, and we end up dereferencing the nullptr. Note that the behaviour of read_direct_string has been present since repo creation. Fix this in read_formatted_entries, by transforming nullptr filenames in to "" filenames. Tested on x86_64-linux. Reviewed-By: Tom Tromey PR symtab/30357 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30357 2023-04-17 Nick Clifton Add support for the .gnu.sgstubs section to the linker for ARM/ELF based targets. PR 30354 * emulparams/armelf.sh (OTHER_PLT_SECTIONS): Define in order to handle the .gnu.sgstubs section. 2023-04-17 GDB Administrator Automatic date update in version.in 2023-04-16 GDB Administrator Automatic date update in version.in 2023-04-15 GDB Administrator Automatic date update in version.in 2023-04-14 Andrew Burgess gdb/testsuite: accept script argument for mi_make_breakpoint_pending This commit changes mi_make_breakpoint_pending to accept the 'script' and 'times' arguments. I've then added a new test that makes use of 'scripts' in gdb.mi/mi-pending.exp and gdb.mi/mi-dprintf-pending.exp. There is already a test in gdb.mi/mi-pending.exp that uses the 'times' argument -- previously this argument was being ignored, but is now used. Reviewed-By: Tom Tromey 2023-04-14 Andrew Burgess gdb/testsuite: avoid {"} pattern in lib/mi-support.exp Commit: commit c569a946f6925d3f210c3eaf74dcda56843350ef Date: Fri Mar 24 10:45:37 2023 +0100 [gdb/testsuite] Fix unbalanced quotes in mi_expect_stop argument Introduced the use of {"} in mi-support.exp. There is absolutely nothing wrong with this in any way. However, this is causing my editor to get the syntax highlighting of this file wrong after this point. Maybe the real answer is to use a better editor, or fix my current editor.... but I'm hoping I can instead take the lazy approach of just changing {"} to "\"", which is handled fine, and means exactly the same as far as I understand it. There should be no change in what is tested after this commit. Reviewed-By: Tom Tromey 2023-04-14 Luis Machado pauth: Create new feature string for pauth to prevent crashing older gdb's Older gdb's (9, 10, 11 and 12) have a bug that causes them to crash whenever a target reports the pauth feature string in the target description and also provide additional register outside of gdb's known and expected feature strings. This was fixed in gdb 13 onwards, but that means we're stuck with gdb's out there that will crash on connection to the above targets. QEMU has postponed inclusion of the pauth feature string in version 8, and instead we agreed to use a new feature name to prevent crashing those older gdb's. Initially there was a plan to backport a trivial fix all the way to gdb 9, but given QEMU's choice, this is no longer needed. This new feature string is org.gnu.gdb.aarch64.pauth_v2, and should be used by all targets going forward, except native linux gdb and gdbserver, for backwards compatibility with older gdb's/gdbserver's. gdb/gdbserver will still emit the old feature string for Linux since it doesn't report additional system registers and thus doesn't cause a crash of older gdb's. We can revisit this in the future once the problematic gdb's are likely no longer in use. I've added some documentation to explain the situation. 2023-04-14 Luis Machado debug registers: Add missing debug version entry for FEAT_Debugv8p8 The Arm Architecture Reference Manual defines debug version 0b1010 for FEAT_Debugv8p8. This is used to identify valid hardware debug registers. gdb currently only knows about versions up to FEAT_Debugv8p4. This patch teaches gdb about this new version. No visible changes should happen as consequence of this patch, but in the future gdb will be able to identify debug registers in newer hardware. Regression-tested on aarch64-linux Ubuntu 20.04/22.04. 2023-04-14 Hui Li gdb/testsuite: Skip dump ihex for 64-bit address in gdb.base/dump.exp (1) Description of problem In the current code, when execute the following test on LoongArch: $make check-gdb TESTS="gdb.base/dump.exp" ``` FAIL: gdb.base/dump.exp: dump array as value, intel hex FAIL: gdb.base/dump.exp: dump struct as value, intel hex FAIL: gdb.base/dump.exp: dump array as memory, ihex FAIL: gdb.base/dump.exp: dump struct as memory, ihex ``` These tests passed on the X86_64, (2) Root cause On LoongArch, variable intarray address 0x120008068 out of range for IHEX, so dump ihex test failed. gdb.base/dump.exp has the following code to check 64-bit address ``` # Check the address of a variable. If it is bigger than 32-bit, # assume our target has 64-bit addresses that are not supported by SREC, # IHEX and TEKHEX. We skip those tests then. set max_32bit_address "0xffffffff" set data_address [get_hexadecimal_valueof "&intarray" 0x100000000] if {${data_address} > ${max_32bit_address}} { set is64bitonly "yes" } ``` We check the "&intarray" on different target as follow: ``` $gdb gdb/testsuite/outputs/gdb.base/dump/dump ... (gdb) start ... On X86_64: (gdb) print /x &intarray $1 = 0x404060 On LoongArch: (gdb) print /x &intarray $1 = 0x120008068 ``` The variable address difference here is due to the link script of linker. ``` On X86_64: $ld --verbose ... PROVIDE (__executable_start = SEGMENT_START("text-segment", 0x400000)); . = SEGMENT_START("text-segment", 0x400000) + SIZEOF_HEADERS; On LoongArch: $ld --verbose ... PROVIDE (__executable_start = SEGMENT_START("text-segment", 0x120000000)); . = SEGMENT_START("text-segment", 0x120000000) + SIZEOF_HEADERS; ``` (3) How to fix Because 64-bit variable address out of range for IHEX, it's not an functional problem for LoongArch. Refer to the handling of 64-bit targets in this testsuite, use the "is64bitonly" flag to skip those tests for the target has 64-bit addresses. Approved-By: Tom Tromey 2023-04-14 Tom de Vries [gdb/testsuite] Add regression test for PR30325 Add regression tests for PR30325, one for the asm window and one for the source window. Use maint set tui-left-margin verbose to make the extend of the left margin clear. Tested on x86_64-linux. Approved-By: Andrew Burgess 2023-04-14 GDB Administrator Automatic date update in version.in 2023-04-13 Tom Tromey Avoid double-free with debuginfod PR gdb/29257 points out a possible double free when debuginfod is in use. Aside from some ugly warts in the symbol code (an ongoing issue), the underlying issue in this particular case is that elfread.c seems to assume that symfile_bfd_open will return NULL on error, whereas in reality it throws an exception. As this code isn't prepared for an exception, bad things result. This patch fixes the problem by introducing a non-throwing variant of symfile_bfd_open and using it in the affected places. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29257 2023-04-13 Claudiu Zissulescu arc: Update ARC specific linker tests. All the tests are designed for a little-endian ARC system. Thus, update the arc predicate in arc.exp, improve the matching pattern for linker relaxation test, and add linker scripts to nps-1x tests. arc: Update ARC's CFI tests. The double store/loads instructions (e.g. STD/LDD) are not baseline ARC ISA. The same holds for some short instructions. Update the tests to use base ARC ISA. 2023-04-13 Claudiu Zissulescu arc: Update GAS test 2023-04-13 Alan Modra Preserve a few more bfd fields in check_format_matches AOUT and COFF targets set symcount and start_address in their object_p functions. If these are used anywhere then it would pay to save and restore them so that a successful match gets the values expected rather than that for a later unsuccessful target match. * format.c (struct bfd_preserve): Move some fields. Add symcount, read_only and start_address. (bfd_preserve_save): Save.. (bfd_preserve_restore): ..and restore.. (bfd_reinit): ..and zero new fields. 2023-04-13 Alan Modra Re: pe_ILF_object_p and bfd_check_format_matches The last patch wasn't quite correct. bfd_preserve_restore also needs to handle an in-memory to file backed transition, seen in a testcase ILF object matching both pei-arm-little and pei-arm-wince-little. There the first match is saved in preserve_match, and restored at the end of the bfd_check_format_matches loop making the bfd in-memory. On finding more than one match the function wants to restore the bfd back to its original state with another bfd_preserve_restore call before exiting with a bfd_error_file_ambiguously_recognized error. It is also not correct to restore abfd->iostream unless the iovec changes. abfd->iostream is a FILE* when using cache_iovec, and if the file has been closed and reopened the iostream may have changed. * format.c (io_reinit): New function. (bfd_reinit, bfd_preserve_restore): Use it. 2023-04-13 GDB Administrator Automatic date update in version.in 2023-04-12 Tom de Vries [gdb/tui] Revert workaround in tui_source_window::show_line_number The m_digits member of tui_source_window is documented as having semantics: ... /* How many digits to use when formatting the line number. This includes the trailing space. */ ... The commit 1b6d4bb2232 ("Redraw both spaces between line numbers and source code") started printing two trailing spaces instead: ... - xsnprintf (text, sizeof (text), "%*d ", m_digits - 1, lineno); + xsnprintf (text, sizeof (text), "%*d ", m_digits - 1, lineno); ... Now that PR30325 is fixed, this no longer has any effect. Fix this by reverting to the original behaviour: print one trailing space char. Tested on x86_64-linux. Approved-By: Tom Tromey 2023-04-12 Tom de Vries [gdb/tui] Fix left margin in disassembly window With a hello world a.out, and maint set tui-left-margin-verbose on, we have this disassembly window: ... ┌───────────────────────────────────────────────────────────┐ │___ 0x555555555149
endbr64 │ │___ 0x55555555514d push %rbp │ │___ 0x55555555514e mov %rsp,%rbp │ │B+> 0x555555555151 lea 0xeac(%rip),%rax│ │___ 0x555555555158 mov %rax,%rdi │ ... Note the space between "B+>" and 0x555555555151. The space shows that a bit of the left margin is not written, which is a problem because that location is showing a character previously written, which happens to be a space, but also may be something else, for instance a '[' as reported in PR tui/30325. The problem is caused by confusion about the meaning of: ... #define TUI_EXECINFO_SIZE 4 ... There's the meaning of defining the size of this zero-terminated char array: ... char element[TUI_EXECINFO_SIZE]; ... which is used to print the "B+>" bit, which is 3 chars wide. And there's the meaning of defining part of the size of the left margin: ... int left_margin () const { return 1 + TUI_EXECINFO_SIZE + extra_margin (); } ... where it represents 4 chars. The discrepancy between the two causes the space between "B+>" and "0x555555555151". Fix this by redefining TUI_EXECINFO_SIZE to 3, and using: ... char element[TUI_EXECINFO_SIZE + 1]; ... such that we have: ... |B+>0x555555555151 lea 0xeac(%rip),%rax │ ... This changes the layout of the disassembly window back to what it was before commit 9e820dec13e ("Use a curses pad for source and disassembly windows"), the commit that introduced the PR30325 regression. This also changes the source window from: ... │___000005__{ | ... to: ... │___000005_{ | ... Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30325 Approved-By: Tom Tromey 2023-04-12 Tom de Vries [gdb/tui] Add maint set/show tui-left-margin-verbose The TUI has two types of windows derived from tui_source_window_base: - tui_source_window (the source window), and - tui_disasm_window (the disassembly window). The two windows share a common concept: the left margin. With a hello world a.out, we can see the source window: ... ┌─/home/vries/hello.c───────────────────────────────────────┐ │ 5 { │ │B+> 6 printf ("hello\n"); │ │ 7 return 0; │ │ 8 } │ │ 9 │ │ ... where the left margin is the part holding "B+>" and the line number, and the disassembly window: ... ┌───────────────────────────────────────────────────────────┐ │ 0x555555555149
endbr64 │ │ 0x55555555514d push %rbp │ │ 0x55555555514e mov %rsp,%rbp │ │B+> 0x555555555151 lea 0xeac(%rip),%rax│ │ 0x555555555158 mov %rax,%rdi │ ... where the left margin is just the bit holding "B+>". Because the left margin contains some spaces, it's not clear where it starts and ends, making it harder to observe problems related to it. Add a new maintenance command "maint set tui-left-margin-verbose", that when set to on replaces the spaces in the left margin with either '_' or '0', giving us this for the source window: ... ┌─/home/vries/hello.c───────────────────────────────────────┐ │___000005__{ │ │B+>000006__ printf ("hello\n"); │ │___000007__ return 0; │ │___000008__} │ ... and this for the disassembly window: ... ┌───────────────────────────────────────────────────────────┐ │___ 0x555555555149
endbr64 │ │___ 0x55555555514d push %rbp │ │___ 0x55555555514e mov %rsp,%rbp │ │B+> 0x555555555151 lea 0xeac(%rip),%rax│ │___ 0x555555555158 mov %rax,%rdi │ ... Note the space between "B+>" and 0x555555555151. The space shows that a bit of the left margin is not written, a problem reported as PR tui/30325. Specifically, PR tui/30325 is about the fact that the '[' character from the string "[ No Assembly Available ]" ends up in that same spot: ... │B+>[0x555555555151 lea 0xeac(%rip),%rax│ ... which only happens for certain window widths. The new command allows us to spot the problem with any window width. Likewise, when we revert the fix from commit 1b6d4bb2232 ("Redraw both spaces between line numbers and source code"), we have: ... ┌─/home/vries/hello.c───────────────────────────────────────┐ │___000005_ { │ │B+>000006_ printf ("hello\n"); │ │___000007_ return 0; │ │___000008_ } │ ... showing a similar problem at the space between '_' and '{'. Tested on x86_64-linux. Reviewed-By: Eli Zaretskii Approved-By: Tom Tromey 2023-04-12 Tom Tromey Use SELF_CHECK in all unit tests I noticed a few unit tests are using gdb_assert. I think this was an older style, before SELF_CHECK was added. This patch switches them over. Approved-By: Simon Marchi 2023-04-12 Claudiu Zissulescu arc: remove faulty instructions Clean not implemented ARC instruction from ARC instruction table. 2023-04-12 Tom Tromey Use 'require' with gnatmake_version_at_least I found a couple of tests that check gnatmake_version_at_least using "if" where "require" would be a little cleaner. This patch converts these. 2023-04-12 YunQiang Su MIPS: make mipsisa32 and mipsisa64 link more systematic Introduce `static const struct mips_mach_extension mips_mach_32_64[]` and `mips_mach_extends_32_64 (unsigned long base, unsigned long extension)`, to make mipsisa32 and mipsisa64 interlink more systemtic. Normally, the ISA mipsisa64rN has two subset: mipsisa64r(N-1) and mipsisa32rN. `mips_mach_extensions` can hold only mipsisa64r(N-1), so we need to introduce a new instruction `mips_mach_32_64`, which holds the pair 32vs64. Note: R6 is not compatible with pre-R6. bfd/ChangeLog: * elfxx-mips.c (mips_mach_extends_p): make mipsisa32 and mipsisa64 interlink more systematic. (mips_mach_32_64): new struct added. (mips_mach_extends_32_64): new function added. 2023-04-12 Nick Clifton Fix typos in the linker's documentation of the --enable-non-contiguous-regions option. 2023-04-12 Alan Modra PR30326, uninitialised value in objdump compare_relocs This is a fuzzing PR, with a testcase involving a SHF_ALLOC and SHF_COMPRESSED SHT_RELA section, ie. a compressed dynamic reloc section. BFD doesn't handle compressed relocation sections, with most of the code reading relocs using sh_size (often no bfd section is created) but in the case of SHF_ALLOC dynamic relocs we had some code using the bfd section size. This led to a mismatch, sh_size is compressed, size is uncompressed, and from that some uninitialised memory. Consistently using sh_size is enough to fix this PR, but I've also added tests to exclude SHF_COMPRESSED reloc sections from consideration. PR 30362 * elf.c (bfd_section_from_shdr): Exclude reloc sections with SHF_COMPRESSED flag from normal reloc processing. (_bfd_elf_get_dynamic_reloc_upper_bound): Similarly exclude SHF_COMPRESSED sections from consideration. Use sh_size when sizing to match slurp_relocs. (_bfd_elf_canonicalize_dynamic_reloc): Likewise. (_bfd_elf_get_synthetic_symtab): Use NUM_SHDR_ENTRIES to size plt relocs. * elf32-arm.c (elf32_arm_get_synthetic_symtab): Likewise. * elf32-ppc.c (ppc_elf_get_synthetic_symtab): Likewise. * elf64-ppc.c (ppc64_elf_get_synthetic_symtab): Likewise. * elfxx-mips.c (_bfd_mips_elf_get_synthetic_symtab): Likewise. 2023-04-12 Alan Modra ubsan: dwarf2.c:2232:7: runtime error: index 16 out of bounds Except it isn't out of bounds because space for a larger array has been allocated. * dwarf2.c (struct trie_leaf): Make ranges a C99 flexible array. (alloc_trie_leaf, insert_arange_in_trie): Adjust sizing. 2023-04-12 Alan Modra Fail of x86_64 AMX-COMPLEX insns (Intel disassembly) x86_64-w64-mingw32 pads sections. * testsuite/gas/i386/x86-64-amx-complex-intel.d: Don't fail due to nop padding. 2023-04-12 Alan Modra pe_ILF_object_p and bfd_check_format_matches If pe_ILF_object_p succeeds, pe_ILF_build_a_bfd will have changed the bfd from being file backed to in-memory. This can have unfortunate results for targets checked by bfd_check_format_matches after that point as they will be matching against the created in-memory image rather than the file. bfd_preserve_restore also has a problem if it flips the BFD_IN_MEMORY flag, because the flag affects iostream meaning and should be set if using _bfd_memory_iovec. To fix these problems, save and restore iostream and iovec along with flags, and modify bfd_reinit to make the bfd file backed again. Restoring the iovec and iostream allows the hack in bfd_reinit keeping BFD_IN_MEMORY (part of BFD_FLAGS_SAVED) to be removed. One more detail: If restoring from file backed to in-memory then the bfd needs to be forcibly removed from the cache lru list, since after the bfd becomes in-memory a bfd_close will delete the bfd's memory leaving the lru list pointing into freed memory. * cache.c (bfd_cache_init): Clear BFD_CLOSED_BY_CACHE here.. (bfd_cache_lookup_worker): ..rather than here. (bfd_cache_close): Comment. * format.c (struct bfd_preserve): Add iovec and iostream fields. (bfd_preserve_save): Save them.. (bfd_preserve_restore): ..and restore them, calling bfd_cache_close if the iovec differs. (bfd_reinit): Add preserve param. If the bfd has been flipped to in-memory, reopen the file. Restore flags. * peicode.h (pe_ILF_cleanup): New function. (pe_ILF_object_p): Return it. * bfd.c (BFD_FLAGS_SAVED): Delete. * bfd-in2.h: Regenerate. 2023-04-12 Alan Modra Comment typo fix 2023-04-12 GDB Administrator Automatic date update in version.in 2023-04-11 Nathan Sidwell bfd: optimize bfd_elf_hash The bfd_elf_hash loop is taken straight from the sysV document, but it is poorly optimized. This refactoring removes about 5 x86 insns from the 15 insn loop. 1) The if (..) is meaningless -- we're xoring with that value, and of course xor 0 is a nop. On x86 (at least) we actually compute the xor'd value and then cmov. Removing the if test removes the cmov. 2) The 'h ^ g' to clear the top 4 bits is not needed, as those 4 bits will be shifted out in the next iteration. All we need to do is sink a mask of those 4 bits out of the loop. 3) anding with 0xf0 after shifting by 24 bits can allow betterin encoding on RISC ISAs than masking with '0xf0 << 24' before shifting. RISC ISAs often require materializing larger constants. bfd/ * elf.c (bfd_elf_hash): Refactor to optimize loop. (bfd_elf_gnu_hash): Refactor to use 32-bit type. 2023-04-11 Nils-Christian Kempke gdb, doc: correct argument description for info connections/inferiors It said for 'info inferiors' and 'info connections' that the argument could be 'a space separated list of inferior numbers' which is correct but incomplete. In fact the arguments can be any space separated combination of numbers and (ascending) ranges. The beginning of the section now describes the ID list as a new keyword. Co-Authored-By: Christina Schimpe 2023-04-11 Nick Clifton Replace an assertion in the dwarf code with a warning message. PR 30327 * dwarf.c (read_and_display_attr_value): Warn if the number of views is greater than the number of locations. Fix an illegal memorty access when running gprof over corrupt data. PR 30324 * symtab.c (symtab_finalize): Only change the end address if dst has been updated. Fix an attempt to allocate an excessive amount of memory when parsing a corrupt DWARF file. PR 30313 * dwarf.c (display_debug_lines_decoded): Check for an overlarge number of files or directories. Fix a potential illegal memory access when displaying corrupt DWARF information. PR 30312 * dwarf.c (prealloc_cu_tu_list): Always allocate at least one entry. Fix an attempt to allocate an overlarge amount of memory when decoding a corrupt ELF format file. PR 30311 * readelf.c (uncompress_section_contents): Check for a suspiciously large uncompressed size. Fix illegal memory access when disassembling corrupt NFP binaries. PR 30310 * nfp-dis.c (init_nfp6000_priv): Check that the output section exists. 2023-04-11 Andrew Burgess gdb: fix indentation within print_one_breakpoint_location Spotted some code in print_one_breakpoint_location that was not indented correctly, this commit just changes the indentation. There should be no user visible changes after this commit. 2023-04-11 Andrew Burgess gdb/testsuite: fix typo gdb_name_name -> gdb_test_name Spotted a small typo in gdb_breakpoint proc, we use $gdb_name_name instead of $gdb_test_name in one place. Fixed in this commit. 2023-04-11 Andrew Burgess gdb: warn when converting h/w watchpoints to s/w On amd64 (at least) if a user sets a watchpoint before the inferior has started then GDB will assume that a hardware watchpoint can be created. When the inferior starts there is a chance that the watchpoint can't actually be create as a hardware watchpoint, in which case (currently) GDB will silently convert the watchpoint to a software watchpoint. Here's an example session: (gdb) p sizeof var $1 = 4000 (gdb) watch var Hardware watchpoint 1: var (gdb) info watchpoints Num Type Disp Enb Address What 1 hw watchpoint keep y var (gdb) starti Starting program: /home/andrew/tmp/watch Program stopped. 0x00007ffff7fd3110 in _start () from /lib64/ld-linux-x86-64.so.2 (gdb) info watchpoints Num Type Disp Enb Address What 1 watchpoint keep y var (gdb) Notice that before the `starti` command the watchpoint is showing as a hardware watchpoint, but afterwards it is showing as a software watchpoint. Additionally, note that we clearly told the user we created a hardware watchpoint: (gdb) watch var Hardware watchpoint 1: var I think this is bad. I used `starti`, but if the user did `start` or even `run` then the inferior is going to be _very_ slow, which will be unexpected -- after all, we clearly told the user that we created a hardware watchpoint, and the manual clearly says that hardware watchpoints are fast (at least compared to s/w watchpoints). In this patch I propose adding a new warning which will be emitted when GDB downgrades a h/w watchpoint to s/w. The session now looks like this: (gdb) p sizeof var $1 = 4000 (gdb) watch var Hardware watchpoint 1: var (gdb) info watchpoints Num Type Disp Enb Address What 1 hw watchpoint keep y var (gdb) starti Starting program: /home/andrew/tmp/watch warning: watchpoint 1 downgraded to software watchpoint Program stopped. 0x00007ffff7fd3110 in _start () from /lib64/ld-linux-x86-64.so.2 (gdb) info watchpoints Num Type Disp Enb Address What 1 watchpoint keep y var (gdb) The important line is: warning: watchpoint 1 downgraded to software watchpoint It's not much, but hopefully it will be enough to indicate to the user that something unexpected has occurred, and hopefully, they will not be surprised when the inferior runs much slower than they expected. I've added an amd64 only test in gdb.arch/, I didn't want to try adding this as a global test as other architectures might be able to support the watchpoint request in h/w. Also the test is skipped for extended-remote boards as there's a different set of options for limiting hardware watchpoints on remote targets, and this test isn't about them. Reviewed-By: Lancelot Six 2023-04-11 Andrew Burgess gdb/riscv: Support c.li in prologue unwinder I was seeing some failures in gdb.threads/omp-par-scope.exp when run on a riscv64 target. It turns out the cause of the problem is that I didn't have debug information installed for libgomp.so, which this test makes use of. The test requires GDB to backtrace through a libgomp function, and the riscv prologue unwinder was failing to unwind this particular stack frame. The reason for the failure to unwind was that the function prologue includes a c.li (compressed load immediate) instruction, and the riscv prologue scanning unwinder doesn't know what to do with this instruction, though the unwinder does understand c.lui (compressed load unsigned immediate). This commit adds support for c.li. After this GDB is able to unwind through libgomp, and I no longer see any unexpected failures in gdb.threads/omp-par-scope.exp. I've also included a new test in gdb.arch/ which specifically checks for our c.li support. 2023-04-11 GDB Administrator Automatic date update in version.in 2023-04-10 Thiago Jung Bauermann gdb/dwarf: Fix MinGW build Unfortunately MinGW doesn't support std::future yet, so this causes the build to fail. Use GDB's version which provides a fallback for this case. Tested for regressions on native aarch64-linux. Approved-By: Tom Tromey 2023-04-10 Tom Tromey Handle unwinding from SEGV on Windows PR win32/30255 points out that a call to a NULL function pointer will leave gdb unable to "bt" on Windows. I tracked this down to the amd64 windows unwinder. If we treat this scenario as if it were a leaf function, unwinding works fine. I'm not completely sure this patch is the best way. I considered having it check for 'pc==0' -- but then I figured this could affect any inaccessible PC, not just the special 0 value. No test case because I can't run dejagnu tests on Windows. I tested this by hand using the test case in the bug. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30255 2023-04-10 Haochen Jiang x86: Add inval tests for AMX instructions gas/ChangeLog: * testsuite/gas/i386/i386.exp: Run AMX-FP16 and AMX-COMPLEX inval testcases. * testsuite/gas/i386/x86-64-amx-inval.l: Add AMX-BF16 tests. * testsuite/gas/i386/x86-64-amx-inval.s: Ditto. * testsuite/gas/i386/x86-64-amx-complex-inval.l: New test. * testsuite/gas/i386/x86-64-amx-complex-inval.s: Ditto. * testsuite/gas/i386/x86-64-amx-fp16-inval.l: Ditto. * testsuite/gas/i386/x86-64-amx-fp16-inval.s: Ditto. 2023-04-10 GDB Administrator Automatic date update in version.in 2023-04-09 GDB Administrator Automatic date update in version.in 2023-04-08 Philippe Blain Fix typos in previous commit of gdb.texinfo. * gdb/doc/gdb.texinfo (Requirements): Fix typos. 2023-04-08 Nick Alcock libctf, link: fix CU-mapped links with CTF_LINK_EMPTY_CU_MAPPINGS This is a bug in the intersection of two obscure options that cannot even be invoked from ld with a feature added to stop ld of the same input file repeatedly from crashing the linker. The latter fix involved tracking input files (internally to libctf) not just with their input CU name but with a version of their input CU name that was augmented with a numeric prefix if their linker input file name was changed, to prevent distinct CTF dicts with the same cuname from overwriting each other. (We can't use just the linker input file name because one linker input can contain many CU dicts, particularly under ld -r). If these inputs then produced conflicting types, those types were emitted into similarly-named output dicts, so we needed similar machinery to detect clashing output dicts and add a numeric prefix to them as well. This works fine, except that if you used the cu-mapping feature to force double-linking of CTF (so that your CTF can be grouped into output dicts larger than a single translation unit) and then also used CTF_LINK_EMPTY_CU_MAPPINGS to force every possible output dict in the mapping to be created (even if empty), we did the creation of empty dicts first, and then all the actual content got considered to be a clash. So you ended up with a pile of useless empty dicts and then all the content was in full dicts with the same names suffixed with a #0. This seems likely to confuse consumers that use this facility. Fixed by generating all the EMPTY_CU_MAPPINGS empty dicts after linking is complete, not before it runs. No impact on ld, which does not do cu-mapped links or pass CTF_LINK_EMPTY_CU_MAPPINGS to ctf_link(). libctf/ * ctf-link.c (ctf_create_per_cu): Don't create new dicts iff one already exists and we are making one for no input in particular. (ctf_link): Emit empty CTF dicts corresponding to no input in particular only after linkiing is complete. 2023-04-08 Nick Alcock libctf: propagate errors from parents correctly CTF dicts have per-dict errno values: as with other errno values these are set on error and left unchanged on success. This means that all errors *must* set the CTF errno: if a call leaves it unchanged, the caller is apt to find a previous, lingering error and misinterpret it as the real error. There are many places in libctf where we carry out operations on parent dicts as a result of carrying out other user-requested operations on child dicts (e.g. looking up information on a pointer to a type will look up the type as well: the pointer might well be in a child and the type it's a pointer to in the parent). Those operations on the parent might fail; if they do, the error must be correctly reflected on the child that the user-visible operation was carried out on. In many places this was not happening. So, audit and fix all those places. Add tests for as many of those cases as possible so they don't regress. libctf/ * ctf-create.c (ctf_add_slice): Use the original dict. * ctf-lookup.c (ctf_lookup_variable): Propagate errors. (ctf_lookup_symbol_idx): Likewise. * ctf-types.c (ctf_member_next): Likewise. (ctf_type_resolve_unsliced): Likewise. (ctf_type_aname): Likewise. (ctf_member_info): Likewise. (ctf_type_rvisit): Likewise. (ctf_func_type_info): Set the error on the right dict. (ctf_type_encoding): Use the original dict. * testsuite/libctf-writable/error-propagation.*: New test. 2023-04-08 Nick Alcock libctf, tests: do not assume host and target have identical field offsets The newly-introduced libctf-lookup unnamed-field-info test checks C compiler-observed field offsets against libctf-computed ones by #including the testcase in the lookup runner as well as generating CTF for it. This only works if the host, on which the lookup runner is compiled and executed, is the same architecture as the target, for which the CTF is generated: when crossing, the trick may fail. So pass down an indication of whether this is a cross into the testsuite, and add a new no_cross flag to .lk files that is used to suppress test execution when a cross-compiler is being tested. libctf/ * Makefile.am (check_DEJAGNU): Pass down TEST_CROSS. * Makefile.in: Regenerated. * testsuite/lib/ctf-lib.exp (run_lookup_test): Use it to implement the new no_cross option. * testsuite/libctf-lookup/unnamed-field-info.lk: Mark as no_cross. 2023-04-08 GDB Administrator Automatic date update in version.in 2023-04-07 Tom Tromey Rewrite Ada symbol cache In an experiment I'm trying, I needed Ada symbol cache entries to be allocated with 'new'. This patch reimplements the symbol cache to use the libiberty hash table and to use new and delete. A couple of other minor cleanups are done. Add Ada test case for break using a label I noticed there aren't any Ada test cases for setting a breakpoint using a label. This patch adds one, adapted from the AdaCore test suite. Use ui_out for "maint info frame-unwinders" This changes "maint info frame-unwinders" to use ui-out. This makes the table slightly nicer. In general I think it's better to use ui-out for tables. 2023-04-07 Tom de Vries [gdb/testsuite] Add -q to INTERNAL_GDBFLAGS Whenever we start gdb in the testsuite, we have the rather verbose: ... $ gdb GNU gdb (GDB) 14.0.50.20230405-git Copyright (C) 2023 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-pc-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: . Find the GDB manual and other documentation resources online at: . For help, type "help". Type "apropos word" to search for commands related to "word". (gdb) ... This makes gdb.log longer than necessary and harder to read. We do need to test that the output is produced, but that should be limited to one or a few test-cases. Fix this by adding -q to INTERNAL_GDBFLAGS, such that we simply have: ... $ gdb -q (gdb) ... Tested on x86_64-linux. 2023-04-07 Tom de Vries [gdb/testsuite] Add missing .note.GNU-stack in gdb.arch/amd64-disp-step-self-call.exp For test-case gdb.arch/amd64-disp-step-self-call.exp I get: ... gdb compile failed, ld: warning: amd64-disp-step-self-call0.o: \ missing .note.GNU-stack section implies executable stack ld: NOTE: This behaviour is deprecated and will be removed in a future \ version of the linker ... Fix this by adding the missing .note.GNU-stack. Likewise for gdb.arch/i386-disp-step-self-call.exp. Tested on x86_64-linux. 2023-04-07 Haochen Jiang Support Intel AMX-COMPLEX gas/ChangeLog: * NEWS: Support Intel AMX-COMPLEX. * config/tc-i386.c: Add amx_complex. * doc/c-i386.texi: Document .amx_complex. * testsuite/gas/i386/i386.exp: Run AMX-COMPLEX tests. * testsuite/gas/i386/amx-complex-inval.l: New test. * testsuite/gas/i386/amx-complex-inval.s: Ditto. * testsuite/gas/i386/x86-64-amx-complex-bad.d: Ditto. * testsuite/gas/i386/x86-64-amx-complex-bad.s: Ditto. * testsuite/gas/i386/x86-64-amx-complex-intel.d: Ditto. * testsuite/gas/i386/x86-64-amx-complex.d: Ditto. * testsuite/gas/i386/x86-64-amx-complex.s: Ditto. opcodes/ChangeLog: * i386-dis.c (MOD_VEX_0F386C_X86_64_W_0): New. (PREFIX_VEX_0F386C_X86_64_W_0_M_1_L_0): Ditto. (X86_64_VEX_0F386C): Ditto. (VEX_LEN_0F386C_X86_64_W_0_M_1): Ditto. (VEX_W_0F386C_X86_64): Ditto. (mod_table): Add MOD_VEX_0F386C_X86_64_W_0. (prefix_table): Add PREFIX_VEX_0F386C_X86_64_W_0_M_1_L_0. (x86_64_table): Add X86_64_VEX_0F386C. (vex_len_table): Add VEX_LEN_0F386C_X86_64_W_0_M_1. (vex_w_table): Add VEX_W_0F386C_X86_64. * i386-gen.c (cpu_flag_init): Add CPU_AMX_COMPLEX_FLAGS and CPU_ANY_AMX_COMPLEX_FLAGS. * i386-init.h: Regenerated. * i386-mnem.h: Ditto. * i386-opc.h (CpuAMX_COMPLEX): New. (i386_cpu_flags): Add cpuamx_complex. * i386-opc.tbl: Add AMX-COMPLEX instructions. * i386-tbl.h: Regenerated. 2023-04-07 Andrew Burgess gdb/testsuite: updates for gdb.arch/{amd64,i386}-disp-step-self-call.exp This commit: commit cf141dd8ccd36efe833aae3ccdb060b517cc1112 Date: Wed Feb 22 12:15:34 2023 +0000 gdb: fix reg corruption from displaced stepping on amd64 Added two test scripts gdb.arch/amd64-disp-step-self-call.exp and gdb.arch/i386-disp-step-self-call.exp. These scripts contained a test that included a stack address in the test name, this makes it harder to compare results between runs. This commit gives the tests proper names that doesn't include an address. Also in gdb.arch/i386-disp-step-self-call.exp I noticed that we were writing 8-bytes rather than 4 in order to clear the return address entry on the stack. This is also fixed in this commit. 2023-04-07 GDB Administrator Automatic date update in version.in 2023-04-06 Tom Tromey Use unique_xmalloc_ptr in apply_ext_lang_type_printers This changes apply_ext_lang_type_printers to use unique_xmalloc_ptr, removing some manual memory management. Regression tested on x86-64 Fedora 36. Approved-By: Simon Marchi 2023-04-06 Pedro Alves Fix gdb.base/align-*.exp and Clang + LTO and AIX GCC Clang with LTO (clang -flto) garbage collects unused global variables, Thus, gdb.base/align-c.exp and gdb.base/align-c++.exp fail with hundreds of FAILs like so: $ make check \ TESTS="gdb.*/align-*.exp" \ RUNTESTFLAGS="CC_FOR_TARGET='clang -flto' CXX_FOR_TARGET='clang++ -flto'" ... FAIL: gdb.base/align-c.exp: get integer valueof "a_char" FAIL: gdb.base/align-c.exp: print _Alignof(char) FAIL: gdb.base/align-c.exp: get integer valueof "a_char_x_char" FAIL: gdb.base/align-c.exp: print _Alignof(struct align_pair_char_x_char) FAIL: gdb.base/align-c.exp: get integer valueof "a_char_x_unsigned_char" ... AIX GCC has the same issue, and there the easier way of adding __attribute__((used)) to globals does not help. So add explicit uses of all globals to the generated code. For the C++ test, that reveals that the static variable members of the generated structs are not defined anywhere, leading to undefined references. Fixed by emitting initialization for all static members. Lastly, I noticed that CXX_FOR_TARGET was being ignored -- that's because the align-c++.exp testcase is compiling with the C compiler driver. Fixed by passing "c++" as option to prepare_for_testing. Change-Id: I874b717afde7b6fb1e45e526912b518a20a12716 2023-04-06 Andrew Burgess gdb: run black code formatter on gdbarch_components.py The following commit changed gdbarch_components.py but failed to format it with black: commit cf141dd8ccd36efe833aae3ccdb060b517cc1112 Date: Wed Feb 22 12:15:34 2023 +0000 gdb: fix reg corruption from displaced stepping on amd64 This commit just runs black on the file and commits the result. The change is just the addition of an extra "," -- there will be no change to the generated source files after this commit. There will be no user visible changes after this commit. 2023-04-06 Andrew Burgess gdb/python: allow Frame.read_var to accept named arguments This commit allows Frame.read_var to accept named arguments, and also improves (I think) some of the error messages emitted when values of the wrong type are passed to this function. The read_var method takes two arguments, one a variable, which is either a gdb.Symbol or a string, while the second, optional, argument is always a gdb.Block. I'm now using 'O!' as the format specifier for the second argument, which allows the argument type to be checked early on. Currently, if the second argument is of the wrong type then we get this error: (gdb) python print(gdb.selected_frame().read_var("a1", "xxx")) Traceback (most recent call last): File "", line 1, in RuntimeError: Second argument must be block. Error while executing Python code. (gdb) After this commit, we now get an error like this: (gdb) python print(gdb.selected_frame().read_var("a1", "xxx")) Traceback (most recent call last): File "", line 1, in TypeError: argument 2 must be gdb.Block, not str Error while executing Python code. (gdb) Changes are: 1. Exception type is TypeError not RuntimeError, this is unfortunate as user code _could_ be relying on this, but I think the improvement is worth the risk, user code relying on the exact exception type is likely to be pretty rare, 2. New error message gives argument position and expected argument type, as well as the type that was passed. If the first argument, the variable, has the wrong type then the previous exception was already a TypeError, however, I've updated the text of the exception to more closely match the "standard" error message we see above. If the first argument has the wrong type then before this commit we saw this: (gdb) python print(gdb.selected_frame().read_var(123)) Traceback (most recent call last): File "", line 1, in TypeError: Argument must be a symbol or string. Error while executing Python code. (gdb) And after we see this: (gdb) python print(gdb.selected_frame().read_var(123)) Traceback (most recent call last): File "", line 1, in TypeError: argument 1 must be gdb.Symbol or str, not int Error while executing Python code. (gdb) For existing code that doesn't use named arguments and doesn't rely on exceptions, there will be no changes after this commit. Reviewed-By: Tom Tromey 2023-04-06 Andrew Burgess gdb/python: convert Frame.read_register to take named arguments Following on from the previous commit, this updates Frame.read_register to accept named arguments. As with the previous commit there's no huge benefit for the users in accepting named arguments here -- this function only takes a single argument after all. But I do think it is worth keeping Frame.read_register method in sync with the PendingFrame.read_register method, this allows for the possibility that the user has some code that can operate on either a Frame or a Pending frame. Minor update to allow for named arguments, and an extra test to check the new functionality. Reviewed-By: Tom Tromey 2023-04-06 Andrew Burgess gdb/python: have PendingFrame methods accept keyword arguments Update the two gdb.PendingFrame methods gdb.PendingFrame.read_register and gdb.PendingFrame.create_unwind_info to accept keyword arguments. There's no huge benefit for making this change, both of these methods only take a single argument, so it is (maybe) less likely that a user will take advantage of the keyword arguments in these cases, but I think it's nice to be consistent, and I don't see any particular draw backs to making this change. For PendingFrame.read_register I've changed the argument name from 'reg' to 'register' in the documentation and used 'register' as the argument name in GDB. My preference for APIs is to use full words where possible, and given we didn't support named arguments before this change should not break any existing code. There should be no user visible changes (for existing code) after this commit. Reviewed-By: Eli Zaretskii Reviewed-By: Tom Tromey 2023-04-06 Andrew Burgess gdb/python: have UnwindInfo.add_saved_register accept named args Update gdb.UnwindInfo.add_saved_register to accept named keyword arguments. As part of this update we now use gdb_PyArg_ParseTupleAndKeywords instead of PyArg_UnpackTuple to parse the function arguments. By switching to gdb_PyArg_ParseTupleAndKeywords, we can now use 'O!' as the argument format for the function's value argument. This means that we can check the argument type (is gdb.Value) as part of the argument processing rather than manually performing the check later in the function. One result of this is that we now get a better error message (at least, I think so). Previously we would get something like: ValueError: Bad register value Now we get: TypeError: argument 2 must be gdb.Value, not XXXX It's unfortunate that the exception type changed, but I think the new exception type actually makes more sense. My preference for argument names is to use full words where that's not too excessive. As such, I've updated the name of the argument from 'reg' to 'register' in the documentation, which is the argument name I've made GDB look for here. For existing unwinder code that doesn't throw any exceptions nothing should change with this commit. It is possible that a user has some code that throws and catches the ValueError, and this code will break after this commit, but I think this is going to be sufficiently rare that we can take the risk here. Reviewed-By: Eli Zaretskii Reviewed-By: Tom Tromey 2023-04-06 Andrew Burgess gdb: fix reg corruption from displaced stepping on amd64 This commit aims to address a problem that exists with the current approach to displaced stepping, and was identified in PR gdb/22921. Displaced stepping is currently supported on AArch64, ARM, amd64, i386, rs6000 (ppc), and s390. Of these, I believe there is a problem with the current approach which will impact amd64 and ARM, and can lead to random register corruption when the inferior makes use of asynchronous signals and GDB is using displaced stepping. The problem can be found in displaced_step_buffers::finish in displaced-stepping.c, and is this; after GDB tries to perform a displaced step, and the inferior stops, GDB classifies the stop into one of two states, either the displaced step succeeded, or the displaced step failed. If the displaced step succeeded then gdbarch_displaced_step_fixup is called, which has the job of fixing up the state of the current inferior as if the step had not been performed in a displaced manner. This all seems just fine. However, if the displaced step is considered to have not completed then GDB doesn't call gdbarch_displaced_step_fixup, instead GDB remains in displaced_step_buffers::finish and just performs a minimal fixup which involves adjusting the program counter back to its original value. The problem here is that for amd64 and ARM setting up for a displaced step can involve changing the values in some temporary registers. If the displaced step succeeds then this is fine; after the step the temporary registers are restored to their original values in the architecture specific code. But if the displaced step does not succeed then the temporary registers are never restored, and they retain their modified values. In this context a temporary register is simply any register that is not otherwise used by the instruction being stepped that the architecture specific code considers safe to borrow for the lifetime of the instruction being stepped. In the bug PR gdb/22921, the amd64 instruction being stepped is an rip-relative instruction like this: jmp *0x2fe2(%rip) When we displaced step this instruction we borrow a register, and modify the instruction to something like: jmp *0x2fe2(%rcx) with %rcx having its value adjusted to contain the original %rip value. Now if the displaced step does not succeed, then %rcx will be left with a corrupted value. Obviously corrupting any register is bad; in the bug report this problem was spotted because %rcx is used as a function argument register. And finally, why might a displaced step not succeed? Asynchronous signals provides one reason. GDB sets up for the displaced step and, at that precise moment, the OS delivers a signal (SIGALRM in the bug report), the signal stops the inferior at the address of the displaced instruction. GDB cancels the displaced instruction, handles the signal, and then tries again with the displaced step. But it is that first cancellation of the displaced step that causes the problem; in that case GDB (correctly) sees the displaced step as having not completed, and so does not perform the architecture specific fixup, leaving the register corrupted. The reason why I think AArch64, rs600, i386, and s390 are not effected by this problem is that I don't believe these architectures make use of any temporary registers, so when a displaced step is not completed successfully, the minimal fix up is sufficient. On amd64 we use at most one temporary register. On ARM, looking at arm_displaced_step_copy_insn_closure, we could modify up to 16 temporary registers, and the instruction being displaced stepped could be expanded to multiple replacement instructions, which increases the chances of this bug triggering. This commit only aims to address the issue on amd64 for now, though I believe that the approach I'm proposing here might be applicable for ARM too. What I propose is that we always call gdbarch_displaced_step_fixup. We will now pass an extra argument to gdbarch_displaced_step_fixup, this a boolean that indicates whether GDB thinks the displaced step completed successfully or not. When this flag is false this indicates that the displaced step halted for some "other" reason. On ARM GDB can potentially read the inferior's program counter in order figure out how far through the sequence of replacement instructions we got, and from that GDB can figure out what fixup needs to be performed. On targets like amd64 the problem is slightly easier as displaced stepping only uses a single replacement instruction. If the displaced step didn't complete the GDB knows that the single instruction didn't execute. The point is that by always calling gdbarch_displaced_step_fixup, each architecture can now ensure that the inferior state is fixed up correctly in all cases, not just the success case. On amd64 this ensures that we always restore the temporary register value, and so bug PR gdb/22921 is resolved. In order to move all architectures to this new API, I have moved the minimal roll-back version of the code inside the architecture specific fixup functions for AArch64, rs600, s390, and ARM. For all of these except ARM I think this is good enough, as no temporaries are used all that's needed is the program counter restore anyway. For ARM the minimal code is no worse than what we had before, though I do consider this architecture's displaced-stepping broken. I've updated the gdb.arch/amd64-disp-step.exp test to cover the 'jmpq*' instruction that was causing problems in the original bug, and also added support for testing the displaced step in the presence of asynchronous signal delivery. I've also added two new tests (for amd64 and i386) that check that GDB can correctly handle displaced stepping over a single instruction that branches to itself. I added these tests after a first version of this patch relied too much on checking the program-counter value in order to see if the displaced instruction had executed. This works fine in almost all cases, but when an instruction branches to itself a pure program counter check is not sufficient. The new tests expose this problem. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22921 Approved-By: Pedro Alves 2023-04-06 Alan Modra Re: objcopy write_debugging_info memory leaks Oops, tried to free too much * wrstabs.c (write_stabs_in_sections_debugging_info): Don't free strings. 2023-04-06 Alan Modra objdump print_debugging_info memory leaks Fix memory leaks and do a general tidy of the code for printing coff and stabs debug. * prdbg.c: Delete unnneeded forward function declarations. Delete unnecessary casts throughout. Free all strings returned from pop_type throughout file. (struct pr_stack): Delete "num_parents". Replace tests for "num_parents" non-zero with tests of "parents" non-NULL throughout. Free "parents" before assigning, and set to NULL after freeing. Remove const from "method". Always strdup strings assigned to method, and free before assigning. (print_debugging_info): Free info.stack and info.filename. 2023-04-06 Alan Modra objdump -g on gcc COFF/PE files objdump -g can't be used much. Trying to dump PE files invariably seems to run into "debug_name_type: no current file" or similar errors, because parse_coff expects a C_FILE symbol to be the first symbol. Dumping -gstabs output works since the N_SO stab is present. Pre-setting the file name won't hurt stabs dumping. * rddbg.c (read_debugging_info): Call debug_set_filename. 2023-04-06 Alan Modra gas/write.c use better types A tiny tidy. * write.c (frags_chained): Make it a bool. (n_fixups): Make it unsigned. 2023-04-06 Alan Modra objcopy write_debugging_info memory leaks The old stabs code didn't bother too much about freeing memory. This patch corrects that and avoids some dubious copying of strings. * objcopy.c (write_debugging_info): Free both strings and syms on failure to create sections. * wrstabs.c: Delete unnecessary forward declarations and casts throughout file. (stab_write_symbol_and_free): New function. Use it throughout, simplifying return paths. (stab_push_string): Don't strdup string. Use it thoughout for malloced strings. (stab_push_string_dup): New function. Use it throughout for strings in auto buffers. (write_stabs_in_sections_debugging_info): Free malloced memory. (stab_enum_type): Increase buffer sizing for worst case. (stab_range_type, stab_array_type): Reduce buffer size. (stab_set_type): Likewise. (stab_method_type): Free args on error return. Correct buffer size. (stab_struct_field): Fix memory leaks. (stab_class_static_member, stab_class_baseclass): Likewise. (stab_start_class_type): Likewise. Correct buffer size. (stab_class_start_method): Correct buffer size. (stab_class_method_var): Free memory on error return. (stab_start_function): Fix "rettype" memory leak. 2023-04-06 GDB Administrator Automatic date update in version.in 2023-04-05 Thiago Jung Bauermann gdb/testsuite: Default to assembler's preferred debug format in asm-source.exp The stabs debug format is obsolete and there's no reason to think that toolchains still have good support for it. Therefore, if a specific debug format wasn't set in asm-source.exp then leave it to the assembler to decide which one to use. Reviewed-By: Tom Tromey 2023-04-05 Thiago Jung Bauermann gdb: Fix reading of partial symtabs in dbxread.c After commit 9675da25357c ("Use unrelocated_addr in minimal symbols"), aarch64-linux started failing gdb.asm/asm-source.exp: Running /home/thiago.bauermann/src/binutils-gdb/gdb/testsuite/gdb.asm/asm-source.exp ... PASS: gdb.asm/asm-source.exp: f at main PASS: gdb.asm/asm-source.exp: n at main PASS: gdb.asm/asm-source.exp: next over macro FAIL: gdb.asm/asm-source.exp: step into foo2 PASS: gdb.asm/asm-source.exp: info target PASS: gdb.asm/asm-source.exp: info symbol PASS: gdb.asm/asm-source.exp: list PASS: gdb.asm/asm-source.exp: search FAIL: gdb.asm/asm-source.exp: f in foo2 FAIL: gdb.asm/asm-source.exp: n in foo2 (the program exited) FAIL: gdb.asm/asm-source.exp: bt ALL in foo2 FAIL: gdb.asm/asm-source.exp: bt 2 in foo2 PASS: gdb.asm/asm-source.exp: s 2 PASS: gdb.asm/asm-source.exp: n 2 FAIL: gdb.asm/asm-source.exp: bt 3 in foo3 PASS: gdb.asm/asm-source.exp: info source asmsrc1.s FAIL: gdb.asm/asm-source.exp: finish from foo3 (the program is no longer running) FAIL: gdb.asm/asm-source.exp: info source asmsrc2.s PASS: gdb.asm/asm-source.exp: info sources FAIL: gdb.asm/asm-source.exp: info line FAIL: gdb.asm/asm-source.exp: next over foo3 (the program is no longer running) FAIL: gdb.asm/asm-source.exp: return from foo2 PASS: gdb.asm/asm-source.exp: look at global variable PASS: gdb.asm/asm-source.exp: x/i &globalvar PASS: gdb.asm/asm-source.exp: disassem &globalvar, (int *) &globalvar+1 PASS: gdb.asm/asm-source.exp: look at static variable PASS: gdb.asm/asm-source.exp: x/i &staticvar PASS: gdb.asm/asm-source.exp: disassem &staticvar, (int *) &staticvar+1 PASS: gdb.asm/asm-source.exp: look at static function The problem is simple: a pair of parentheses was removed from the expression calculating text_end and thus text_size was only added if lowest_text_address wasn't equal to -1. This patch restores the previous behaviour and fixes the testcase. Tested on native aarch64-linux. Reviewed-By: Tom Tromey 2023-04-05 Eli Zaretskii Improve documentation of GDB build requirements and options MPFR is now mandatory, so its previous description in Requirements was inappropriate and out of place. In addition, the description of how to go about specifying 'configure' time options for building with libraries was highly repetitive. Some of the text was also outdated and used wrong markup. Original patch and suggestions from Philippe Blain . ChangeLog: 2023-04-05 Eli Zaretskii * gdb/doc/gdb.texinfo (Requirements, Configure Options): Update and rearrange; improve and fix markup. 2023-04-05 Tankut Baris Aktemur gdb, doc: add the missing '-gid' option to 'info threads' The 'info threads' command does not show the '-gid' option in the syntax. Add the option. The flag is already explained in the command description and used in the examples. Approved-By: Eli Zaretskii 2023-04-05 Tankut Baris Aktemur gdb: boolify 'should_print_thread' Convert the return type of 'should_print_thread' from int to bool. Reviewed-By: Tom Tromey 2023-04-05 Simon Marchi gdb: make find_thread_ptid a process_stratum_target method Make find_thread_ptid (the overload that takes a process_stratum_target) a method of process_stratum_target. Change-Id: Ib190a925a83c6b93e9c585dc7c6ab65efbdd8629 Reviewed-By: Tom Tromey 2023-04-05 Simon Marchi gdb: make find_thread_ptid an inferior method Make find_thread_ptid (the overload that takes an inferior) a method of struct inferior. Change-Id: Ie5b9fa623ff35aa7ddb45e2805254fc8e83c9cd4 Reviewed-By: Tom Tromey 2023-04-05 GDB Administrator Automatic date update in version.in 2023-04-04 Jan Beulich bfd+ld: when / whether to generate .c files Having been irritated by seeing bfd/elf{32,64}-aarch64.c to be re- generated in x86-only builds, I came across 769a27ade588 ("Re: bfd BLD-POTFILES.in dependencies"). I think this went slightly too far, as outside of maintainer mode dependencies will cause the subset of files to be (re-)generated which are actually needed for the build. Generating them all is only needed when wanting to update certain files under bfd/po/, i.e. in maintainer mode. In the course of looking around in an attempt to try to understand how things are meant to work, I further noticed that ld has got things slightly wrong too: BLD-POTFILES.in depending on $(BLD_POTFILES) isn't quite right (the output doesn't change when any of the enumerated files changes; it's the mere presence which matters); like in bfd it looks like we would better extend BUILT_SOURCES accordingly. Furthermore it became apparent that ld fails to enumerate the .c files generated from the .l and .y ones. While in their absence it was benign whether translatable strings in the source files were actually marked as such, this now becomes relevant. Mark respective strings at the same time, but skipping ones which look to be of interest for debugging purposes only (e.g. such used by printf() enclosed in #ifdef TRACE). 2023-04-04 Alan Modra Use bfd_alloc memory for read_debugging_info storage Trying to free malloc'd memory used by the stabs and coff debug info parsers is complicated, and traversing the trees generated requires a lot of code. It's better to bfd_alloc the memory which allows it all to be freed without fuss when the bfd is closed. In the process of doing this I reverted most of commit a6336913332. Some of the stabs handling code grows arrays of pointers with realloc, to deal with arbitrary numbers of fields, function args, etc. The code still does that but copies over to bfd_alloc memory when finished. The alternative is to parse twice, once to size, then again to populate the arrays. I think that complication is unwarranted. Note that there is a greater than zero chance this patch breaks something, eg. that I missed an attempt to free obj_alloc memory. Also it seems there are no tests in the binutils testsuite aimed at exercising objdump --debugging. * budbg.h (finish_stab, parse_stab): Update prototypes * debug.c: Include bucomm.h. (struct debug_handle): Add "abfd" field. (debug_init): Add "abfd" param. bfd_alloc handle. (debug_xalloc, debug_xzalloc): New functions. Use throughout in place of xmalloc and memset. (debug_start_source): Remove "name_used" param. * debug.h (debug_init, debug_start_source): Update prototypes. (debug_xalloc, debug_xzalloc): Declare. * objcopy.c (copy_object): Don't free dhandle. * objdump.c (dump_bfd): Likewise. * rdcoff.c (coff_get_slot): Add dhandle arg. debug_xzalloc memory in place of xcalloc. Update callers. (parse_coff_struct_type): Don't leak on error return. Copy fields over to debug_xalloc memory. (parse_coff_enum_type): Copy names and vals over the debug_xalloc memory. * rddbg.c (read_debugging_info): Adjust debug_init call. Don't free dhandle. (read_section_stabs_debugging_info): Don't free shandle. Adjust parse_stab call. Call finish_stab on error return. (read_symbol_stabs_debugging_info): Similarly. * stabs.c (savestring): Delete unnecessary forward declaration. Add dhandle param. debug_xalloc memory. Update callers. (start_stab): Delete unnecessary casts. (finish_stab): Add "emit" param. Free file_types, so_string, and stabs handle. (parse_stab): Delete string_used param. Revert code dealing with string_used. Copy so_string passed to debug_set_filename and stored as main_filename to debug_xalloc memory. Similarly for string passed to debug_start_source and push_bincl. Copy args to debug_xalloc memory. Don't leak args. (parse_stab_enum_type): Copy names and values to debug_xalloc memory. Don't free name. (parse_stab_struct_type): Don't free fields. (parse_stab_baseclasses): Delete unnecessary cast. (parse_stab_struct_fields): Return debug_xalloc fields. (parse_stab_cpp_abbrev): Use debug_xalloc for _vb$ type name. (parse_stab_one_struct_field): Don't free name. (parse_stab_members): Copy variants and methods to debug_xalloc memory. Don't free name or argtypes. (parse_stab_argtypes): Use debug_xalloc memory for physname and args. (push_bincl): Add dhandle param. Use debug_xalloc memory. (stab_record_variable): Use debug_xalloc memory. (stab_emit_pending_vars): Don't free var list. (stab_find_slot): Add dhandle param. Use debug_xzalloc memory. Update all callers. (stab_find_tagged_type): Don't free name. Use debug_xzalloc. (stab_demangle_qualified): Don't free name. (stab_demangle_template): Don't free s1. (stab_demangle_args): Tidy pvarargs refs. Copy *pargs on success to debug_xalloc memory, free on failure. (stab_demangle_fund_type): Don't free name. (stab_demangle_v3_arglist): Copy args to debug_xalloc memory. Don't free dt. 2023-04-04 GDB Administrator Automatic date update in version.in 2023-04-03 Tom Tromey Add readMemory and writeMemory requests to DAP This adds the DAP readMemory and writeMemory requests. A small change to the evaluation code is needed in order to test this -- this is one of the few ways for a client to actually acquire a memory reference. 2023-04-03 Andrew Burgess gdb: cleanup around some set_momentary_breakpoint_at_pc calls I noticed a couple of places in infrun.c where we call set_momentary_breakpoint_at_pc, and then set the newly created breakpoint's thread field, these are in: insert_exception_resume_breakpoint insert_exception_resume_from_probe Function set_momentary_breakpoint_at_pc calls set_momentary_breakpoint, which always creates the breakpoint as thread-specific for the current inferior_thread(). The two insert_* functions mentioned above take an arbitrary thread_info* as an argument and set the breakpoint::thread to hold the thread number of that arbitrary thread. However, the insert_* functions store the breakpoint pointer within the current inferior_thread(), so we know that the thread being passed in must be the currently selected thread. What this means is that we can: 1. Assert that the thread being passed in is the currently selected thread, and 2. No longer adjust the breakpoint::thread field, this will already have been set correctly be calling set_momentary_breakpoint_at_pc. There should be no user visible changes after this commit. 2023-04-03 Andrew Burgess gdb: don't always print breakpoint location after failed condition check Consider the following session: (gdb) list some_func 1 int 2 some_func () 3 { 4 int *p = 0; 5 return *p; 6 } 7 8 void 9 foo () 10 { (gdb) break foo if (some_func ()) Breakpoint 1 at 0x40111e: file bpcond.c, line 11. (gdb) r Starting program: /tmp/bpcond Program received signal SIGSEGV, Segmentation fault. 0x0000000000401116 in some_func () at bpcond.c:5 5 return *p; Error in testing condition for breakpoint 1: The program being debugged stopped while in a function called from GDB. Evaluation of the expression containing the function (some_func) will be abandoned. When the function is done executing, GDB will silently stop. Breakpoint 1, 0x0000000000401116 in some_func () at bpcond.c:5 5 return *p; (gdb) What happens here is the breakpoint condition includes a call to an inferior function, and the inferior function segfaults. We can see that GDB reports the segfault, and then gives an error message that indicates that an inferior function call was interrupted. After this GDB appears to report that it is stopped at Breakpoint 1, inside some_func. I find this second stop report a little confusing. While it is true that GDB stopped as a result of hitting breakpoint 1, I think the message GDB currently prints might give the impression that GDB is actually stopped at a location of breakpoint 1, which is not the case. Also, I find the second stop message draws attention away from the "Program received signal SIGSEGV, Segmentation fault" stop message, and this second stop might be thought of as replacing in someway the earlier message. In short, I think things would be clearer if the second stop message were not reported at all, so the output should, I think, look like this: (gdb) list some_func 1 int 2 some_func () 3 { 4 int *p = 0; 5 return *p; 6 } 7 8 void 9 foo () 10 { (gdb) break foo if (some_func ()) Breakpoint 1 at 0x40111e: file bpcond.c, line 11. (gdb) r Starting program: /tmp/bpcond Program received signal SIGSEGV, Segmentation fault. 0x0000000000401116 in some_func () at bpcond.c:5 5 return *p; Error in testing condition for breakpoint 1: The program being debugged stopped while in a function called from GDB. Evaluation of the expression containing the function (some_func) will be abandoned. When the function is done executing, GDB will silently stop. (gdb) The user can still find the number of the breakpoint that triggered the initial stop in this line: Error in testing condition for breakpoint 1: But there's now only one stop reason reported, the SIGSEGV, which I think is much clearer. To achieve this change I set the bpstat::print field when: (a) a breakpoint condition evaluation failed, and (b) the $pc of the thread changed during condition evaluation. I've updated the existing tests that checked the error message printed when a breakpoint condition evaluation failed. 2023-04-03 Andrew Burgess gdb: avoid repeated signal reporting during failed conditional breakpoint Consider the following case: (gdb) list some_func 1 int 2 some_func () 3 { 4 int *p = 0; 5 return *p; 6 } 7 8 void 9 foo () 10 { (gdb) break foo if (some_func ()) Breakpoint 1 at 0x40111e: file bpcond.c, line 11. (gdb) r Starting program: /tmp/bpcond Program received signal SIGSEGV, Segmentation fault. 0x0000000000401116 in some_func () at bpcond.c:5 5 return *p; Error in testing breakpoint condition: The program being debugged was signaled while in a function called from GDB. GDB remains in the frame where the signal was received. To change this behavior use "set unwindonsignal on". Evaluation of the expression containing the function (some_func) will be abandoned. When the function is done executing, GDB will silently stop. Program received signal SIGSEGV, Segmentation fault. Breakpoint 1, 0x0000000000401116 in some_func () at bpcond.c:5 5 return *p; (gdb) Notice that this line: Program received signal SIGSEGV, Segmentation fault. Appears twice in the output. The first time is followed by the current location. The second time is a little odd, why do we print that? Printing that line is controlled, in part, by a global variable, stopped_by_random_signal. This variable is reset to zero in handle_signal_stop, and is set if/when GDB figures out that the inferior stopped due to some random signal. The problem is, in our case, GDB first stops at the breakpoint for foo, and enters handle_signal_stop and the stopped_by_random_signal global is reset to 0. Later within handle_signal_stop GDB calls bpstat_stop_status, it is within this function (via bpstat_check_breakpoint_conditions) that the breakpoint condition is checked, and, we end up calling the inferior function (some_func in our example above). In our case above the thread performing the inferior function call segfaults in some_func. GDB catches the SIGSEGV and handles the stop, this causes us to reenter handle_signal_stop. The global variable stopped_by_random_signal is updated, this time it is set to true because the thread stopped due to SIGSEGV. As a result of this we print the first instance of the line (as seen above in the example). Finally we unwind GDB's call stack, the inferior function call is complete, and we return to the original handle_signal_stop. However, the stopped_by_random_signal global is still carrying the value as computed for the inferior function call's stop, which is why we now print a second instance of the line, as seen in the example. To prevent this, I propose adding a scoped_restore before we start an inferior function call. This will save and restore the global stopped_by_random_signal value. With this done, the output from our example is now this: (gdb) list some_func 1 int 2 some_func () 3 { 4 int *p = 0; 5 return *p; 6 } 7 8 void 9 foo () 10 { (gdb) break foo if (some_func ()) Breakpoint 1 at 0x40111e: file bpcond.c, line 11. (gdb) r Starting program: /tmp/bpcond Program received signal SIGSEGV, Segmentation fault. 0x0000000000401116 in some_func () at bpcond.c:5 5 return *p; Error in testing condition for breakpoint 1: The program being debugged stopped while in a function called from GDB. Evaluation of the expression containing the function (some_func) will be abandoned. When the function is done executing, GDB will silently stop. Breakpoint 1, 0x0000000000401116 in some_func () at bpcond.c:5 5 return *p; (gdb) We now only see the 'Program received signal SIGSEGV, ...' line once, which I think makes more sense. Finally, I'm aware that the last few lines, that report the stop as being at 'Breakpoint 1', when this is not where the thread is actually located anymore, is not great. I'll address that in the next commit. 2023-04-03 Andrew Burgess gdbserver: allow agent expressions to fail with invalid memory access This commit extends gdbserver to take account of a failed memory access from agent_mem_read, and to return a new eval_result_type expr_eval_invalid_memory_access. I have only updated the agent_mem_read calls related directly to reading memory, I have not updated any of the calls related to tracepoint data collection. This is just because I'm not familiar with that area of gdb/gdbserver, and I don't want to break anything, so leaving the existing behaviour untouched seems like the safest approach. I've then updated gdb.base/bp-cond-failure.exp to test evaluating the breakpoints on the target, and have also extended the test so that it checks for different sizes of memory access. 2023-04-03 Andrew Burgess gdbserver: allows agent_mem_read to return an error code Currently the gdbserver function agent_mem_read ignores any errors from calling read_inferior_memory. This means that if there is an attempt to access invalid memory then this will appear to succeed. In this patch I update agent_mem_read so that if read_inferior_memory fails, agent_mem_read will return an error code. However, none of the callers of agent_mem_read actually check the return value, so this commit will have no effect on anything. In the next commit I will update the users of agent_mem_read to check for the error code. I've also updated the header comments on agent_mem_read to better reflect what the function does, and its possible return values. 2023-04-03 Andrew Burgess gdb: include breakpoint number in testing condition error message When GDB fails to test the condition of a conditional breakpoint, for whatever reason, the error message looks like this: (gdb) break foo if (*(int *) 0) == 1 Breakpoint 1 at 0x40111e: file bpcond.c, line 11. (gdb) r Starting program: /tmp/bpcond Error in testing breakpoint condition: Cannot access memory at address 0x0 Breakpoint 1, foo () at bpcond.c:11 11 int a = 32; (gdb) The line I'm interested in for this commit is this one: Error in testing breakpoint condition: In the case above we can figure out that the problematic breakpoint was #1 because in the final line of the message GDB reports the stop at breakpoint #1. However, in the next few patches I plan to change this. In some cases I don't think it makes sense for GDB to report the stop as being at breakpoint #1, consider this case: (gdb) list some_func 1 int 2 some_func () 3 { 4 int *p = 0; 5 return *p; 6 } 7 8 void 9 foo () 10 { (gdb) break foo if (some_func ()) Breakpoint 1 at 0x40111e: file bpcond.c, line 11. (gdb) r Starting program: /tmp/bpcond Program received signal SIGSEGV, Segmentation fault. 0x0000000000401116 in some_func () at bpcond.c:5 5 return *p; Error in testing breakpoint condition: The program being debugged was signaled while in a function called from GDB. GDB remains in the frame where the signal was received. To change this behavior use "set unwindonsignal on". Evaluation of the expression containing the function (some_func) will be abandoned. When the function is done executing, GDB will silently stop. Program received signal SIGSEGV, Segmentation fault. Breakpoint 1, 0x0000000000401116 in some_func () at bpcond.c:5 5 return *p; (gdb) Notice that, the final lines of output reports the stop as being at breakpoint #1, even though the inferior in not located within some_func, and it's certainly not located at the breakpoint location. I find this behaviour confusing, and propose that this should be changed. However, if I make that change then every reference to breakpoint #1 will be lost from the error message. So, in this commit, in preparation for the later commits, I propose to change the 'Error in testing breakpoint condition:' line to this: Error in testing condition for breakpoint NUMBER: where NUMBER will be filled in as appropriate. Here's the first example with the updated error: (gdb) break foo if (*(int *) 0) == 0 Breakpoint 1 at 0x40111e: file bpcond.c, line 11. (gdb) r Starting program: /tmp/bpcond Error in testing condition for breakpoint 1: Cannot access memory at address 0x0 Breakpoint 1, foo () at bpcond.c:11 11 int a = 32; (gdb) The breakpoint number does now appear twice in the output, but I don't see that as a negative. This commit just changes the one line of the error, and updates the few tests that either included the old error in comments, or actually checked for the error in the expected output. As the only test that checked the line I modified is a Python test, I've added a new test that doesn't rely on Python that checks the error message in detail. While working on the new test, I spotted that it would fail when run with native-gdbserver and native-extended-gdbserver target boards. This turns out to be due to a gdbserver bug. To avoid cluttering this commit I've added a work around to the new test script so that the test passes for the remote boards, in the next few commits I will fix gdbserver, and update the test script to remove the work around. 2023-04-03 Alan Modra asan: csky floatformat_to_double uninitialised value * csky-dis.c (csky_print_operand ): Don't access ibytes after read_memory_func error. Change type of ibytes to avoid casts. 2023-04-03 Andrew Burgess gdb/riscv: fix regressions in gdb.base/unwind-on-each-insn.exp This commit builds on the previous one to fix all the remaining failures in gdb.base/unwind-on-each-insn.exp for RISC-V. The problem we have in gdb.base/unwind-on-each-insn.exp is that, when we are in the function epilogue, the previous frame and stack pointer values are being restored, and so, the values that we calculated during the function prologue are no longer suitable. Here's an example from the function 'bar' in the mentioned test. This was compiled for 64-bit RISC-V with compressed instruction support: Dump of assembler code for function bar: 0x000000000001018a <+0>: add sp,sp,-32 0x000000000001018c <+2>: sd ra,24(sp) 0x000000000001018e <+4>: sd fp,16(sp) 0x0000000000010190 <+6>: add fp,sp,32 0x0000000000010192 <+8>: sd a0,-24(fp) 0x0000000000010196 <+12>: ld a0,-24(fp) 0x000000000001019a <+16>: jal 0x10178 0x000000000001019e <+20>: nop 0x00000000000101a0 <+22>: ld ra,24(sp) 0x00000000000101a2 <+24>: ld fp,16(sp) 0x00000000000101a4 <+26>: add sp,sp,32 0x00000000000101a6 <+28>: ret End of assembler dump. When we are at address 0x101a4 the previous instruction has restored the frame-pointer, as such GDB's (current) preference for using the frame-pointer as the frame base address is clearly not going to work. We need to switch to using the stack-pointer instead. At address 0x101a6 the previous instruction has restored the stack-pointer value. Currently GDB will not understand this and so will still assume the stack has been decreased by 32 bytes in this function. My proposed solution is to extend GDB such that GDB will scan the instructions at the current $pc looking for this pattern: ld fp,16(sp) add sp,sp,32 ret Obviously the immediates can change, but the basic pattern indicates that the function is in the process of restoring state before returning. If GDB sees this pattern then GDB can use the inferior's position within this instruction sequence to help calculate the correct frame-id. With this implemented then gdb.base/unwind-on-each-insn.exp now fully passes. Obviously what I've implemented is just a heuristic. It's not going to work for every function. If the compiler reorders the instructions, or merges the epilogue back into the function body then GDB is once again going to get the frame-id wrong. I'm OK with that, we're no worse off that we are right now in that situation (plus we can always improve the heuristic later). Remember, this is for debugging code without debug information, and (in our imagined situation) with more aggressive levels of optimisation being used. Obviously GDB is going to struggle in these situations. My thinking is, lets get something in place now. Then, later, if possible, we might be able to improve the logic to cover more situations -- if there's an interest in doing so. But I figure we need something in place as a starting point. After this commit gdb.base/unwind-on-each-insn.exp passes with no failures on RV64. 2023-04-03 Andrew Burgess gdb/riscv: support c.ldsp and c.lwsp in prologue scanner Add support to the RISC-V prologue scanner for c.ldsp and c.lwsp instructions. This fixes some of the failures in gdb.base/unwind-on-each-insn.exp, though there are further failures that are not fixed by this commit. This change started as a wider fix that would address all the failures in gdb.base/unwind-on-each-insn.exp, however, that wider fix needed support for the two additional compressed instructions. When I added support for those two compressed instructions I noticed that some of the failures in gdb.base/unwind-on-each-insn.exp resolved themselves! Here's what's going on: The reason for the failures is that GDB is trying to build the frame-id during the last few instructions of the function. These are the instructions that restore the frame and stack pointers just prior to the return instruction itself. By the time we reach the function epilogue the stack offset that we calculated during the prologue scan is no longer valid, and so we calculate the wrong frame-id. However, in the particular case of interest here, the test function 'foo', the function is so simple and short (the empty function) that GDB's prologue scan could, in theory, scan every instruction of the function. I say "could, in theory," because currently GDB stops the prologue scan early when it hits an unknown instruction. The unknown instruction happens to be one of the compressed instructions that I'm adding support for in this commit. Now that GDB understands the compressed instructions the prologue scan really does go from the start of the function right up to the current program counter. As such, GDB sees that the stack frame has been allocated, and then deallocated, and so builds the correct frame-id. Of course, most real functions are not as simple as the test function 'foo'. As such, we can't usually rely on scanning right up to the end of the function -- there are some instructions we always need to stop at because GDB can't reason about how they change the inferior state (e.g. a function call). The test function 'bar' is just such an example. After this commit, we can now build the frame-id correctly for every instruction in 'foo', but there are some tests still failing in 'bar'. 2023-04-03 Andrew Burgess gdb/riscv: convert riscv debug settings to new debug print scheme Convert the RISC-V specific debug settings to use the new debug printing scheme. This updates the following settings: set/show debug riscv breakpoints set/show debug riscv gdbarch set/show debug riscv infcall set/show debug riscv unwinder All of these settings now take a boolean rather than an integer, and all print their output using the new debug scheme. There should be no visible change for anyone not turning on debug. 2023-04-03 Andrew Burgess opcodes/arm: adjust whitespace in cpsie instruction While I was working on the disassembler styling for ARM I noticed that the whitespace in the cpsie instruction was inconsistent with most of the other ARM disassembly output, the disassembly for cpsie looks like this: cpsie if,#10 notice there's no space before the '#10' immediate, most other ARM instructions have a space before each operand. This commit updates the disassembler to add the missing space, and updates the tests I found that tested this instruction. 2023-04-03 Andrew Burgess gdb/testsuite: gdb.server/server-kill.exp 'info frame' before kill_server This commit follows on from the following two commits: commit 80dc83fd0e70f4d522a534bc601df5e05b81d564 Date: Fri Jun 11 11:30:47 2021 +0100 gdb/remote: handle target dying just before a stepi And: commit 079f190d4cfc6aa9c934b00a9134bc0fcc172d53 Date: Thu Mar 9 10:45:03 2023 +0100 [gdb/testsuite] Fix gdb.server/server-kill.exp for remote target The first of these commits fixed an issue in GDB and tried to extend the gdb.server/server-kill.exp test to cover the GDB fix. Unfortunately, the changes to gdb.server/server-kill.exp were not correct, and were causing problems when trying to run with the remote-gdbserver-on-localhost board file. The second commit reverts some of the gdb.server/server-kill.exp changes introduced in the first commit so that the test will now work correctly with the remote-gdbserver-on-localhost board file. The second commit is just about GDB's testing infrastructure -- it's not about the original fix to GDB from the first commit, the actual GDB change was fine. While reviewing the second commit I wanted to check that the problem fixed in the first commit is still being tested by the gdb.server/server-kill.exp script, so I reverted the change to breakpoint.c that is the core of the first commit and ran the test script ..... and saw no failures. The first commit is about GDB discovering that gdbserver has died while trying to insert a breakpoint. As soon as GDB spots that gdbserver is gone we mourn the remote inferior, which ends up deleting all the breakpoints associated with the remote inferiors. We then throw an exception which is caught in the insert breakpoints code, and we try to display an error that includes the breakpoint number .... but the breakpoint has already been deleted ... and so GDB crashes. After digging a little, what I found is that today, when the test does 'stepi' the first thing we end up doing is calculating the frame-id as part of the stepi logic, it is during this frame-id calculation that we mourn the remote inferior, delete the breakpoints, and throw an exception. The exception is caught by the top level interpreter loop, and so we never try to print the breakpoint number which is what caused the original crash. If I add an 'info frame' command to the test script, prior to killing gdbserver, then now when we 'stepi' GDB already has the frame-id calculated, and the first thing we do is try to insert the breakpoints, this will trigger the original bug. In order to reproduce this experiment you'll need to change a function in breakpoint.c, like this: static void rethrow_on_target_close_error (const gdb_exception &e) { return; } Then run gdb.server/server-kill.exp with and without this patch. You should find that without this patch there are zero test failures, while with this patch there will be one failure like this: (gdb) PASS: gdb.server/server-kill.exp: test_stepi: info frame Executing on target: kill -9 4513 (timeout = 300) builtin_spawn -ignore SIGHUP kill -9 4513 stepi ../../src/gdb/breakpoint.c:2863: internal-error: insert_bp_location: Assertion `bl->owner != nullptr' failed. A problem internal to GDB has been detected, further debugging may prove unreliable. ----- Backtrace ----- ... 2023-04-03 Andrew Burgess gdb/testsuite: fix failure in gdb.python/py-unwind.exp A potential test failure was introduced with commit: commit 6bf5f25bb150c0fbcb125e3ee466ba8f9680310b Date: Wed Mar 8 16:11:30 2023 +0000 gdb/python: make the gdb.unwinder.Unwinder class more robust In this commit a new test was added, however the expected output pattern varies depending on which Python version GDB is linked against. Older versions of Python result in output like this: (gdb) python global_test_unwinder.name = "foo" Traceback (most recent call last): File "", line 1, in AttributeError: can't set attribute Error while executing Python code. (gdb) While more recent versions of Python give a similar, but slightly more verbose error message, like this: (gdb) python global_test_unwinder.name = "foo" Traceback (most recent call last): File "", line 1, in AttributeError: can't set attribute 'name' Error while executing Python code. (gdb) The test was only accepting the first version of the output. This commit extends the test pattern so that either version will be accepted. 2023-04-03 Luis Machado [aarch64] tpidr2: Fix erroneous detection logic for TPIDR2 The detection logic for TPIDR2 was implemented incorrectly. Originally the detection was supposed to be through a ptrace error code, but in reality, for backwards compatibility, the detection should be based on the size of the returned iovec. For instance, if a target supports both TPIDR and TPIDR2, ptrace will return a iovec size of 16. If a target only supports TPIDR and not TPIDR2, it will return a iovec size of 8, even if we asked for 16 bytes. This patch fixes this issue in code that is shared between gdb and gdbserver, therefore both gdb and gdbserver are fixed. Tested on AArch64/Linux Ubuntu 20.04. 2023-04-03 GDB Administrator Automatic date update in version.in 2023-04-02 Alan Modra asan: heap buffer overflow printing ecoff debug info file name A case of a string section ending with an unterminated string. Fix it by allocating one more byte and making it zero. Also make functions reading the data return void* so that casts are not needed. * ecoff.c (READ): Delete type param. Allocate one extra byte to terminate string sections with a NUL. Adjust invocation. * elfxx-mips.c (READ): Likewise. * libbfd-in.h (_bfd_alloc_and_read): Return a void*. (_bfd_malloc_and_read): Likewise. * libbfd.h: Regenerate. 2023-04-02 Alan Modra ubsan: aarch64 parse_vector_reg_list tc-aarch64.c:1473:27: runtime error: left shift of 7 by 30 places cannot be represented in type 'int'. * config/tc-aarch64.c (parse_vector_reg_list): Avoid UB left shift. 2023-04-02 Alan Modra rddbg.c stabs FIXMEs This should sort out some very old FIXMEs in code handling stabs debug info. Necessary if we are to fuss over freeing up memory before objdump and objcopy exit. It is of course better from a user viewpoint to *not* free memory, which takes some time, and leave that to process exit. The only reason to do so is that having many memory leaks in binutils/ code tends to hide leaks in bfd/ or opcodes/, which we should care about. * budbg.h (parse_stab): Update prototype. * debug.h (debug_start_source): Update prototype. * debug.c (debug_start_source): Add name_used. Set if stashed. * rddbg.c (read_symbol_stabs_debugging_info): Always malloc stab string passed to parse_stab. Free stab string when unreferenced. (read_section_stabs_debugging_info): Likewise, and strings section contents. * stabs.c (parse_stab): Add string_used param. Set if string stashed. Pass to debug_start_source. Realloc file_types array rather that using malloc. Clarify comment about debug_make_indirect_type. 2023-04-02 Alan Modra Memory leak in process_abbrev_set We may have added some abbrevs to the list before hitting an error. Free the list elements too. free_abbrev_list returns list->next so we need to init it earlier to avoid an uninitialised memory access. * dwarf.c (process_abbrev_set): Call free_abbrev_list on errors. Set list->next earlier. 2023-04-02 Simon Marchi gdb: remove unused parameters in print_doc_of_command, apropos_cmd I noticed the prefix parameter was unused in print_doc_of_command. And when removing it, it becomes unused in apropos_cmd. Change-Id: Id72980b03fe091b22931e6b85945f412b274ed5e 2023-04-02 GDB Administrator Automatic date update in version.in 2023-04-01 Jan Kratochvil gdb/arm: Fix backtrace for pthread_cond_timedwait GDB expected PC should point right after the SVC instruction when the syscall is active. But some active syscalls keep PC pointing to the SVC instruction itself. This leads to a broken backtrace like: Backtrace stopped: previous frame identical to this frame (corrupt stack?) #0 0xb6f8681c in pthread_cond_timedwait@@GLIBC_2.4 () from /lib/arm-linux-gnueabihf/libpthread.so.0 #1 0xb6e21f80 in ?? () The reason is that .ARM.exidx unwinder gives up if PC does not point right after the SVC (syscall) instruction. I did not investigate why but some syscalls will point PC to the SVC instruction itself. This happens for the "futex" syscall used by pthread_cond_timedwait. That normally does not matter as ARM prologue unwinder gets called instead of the .ARM.exidx one. Unfortunately some glibc calls have more complicated prologue where the GDB unwinder fails to properly determine the return address (that is in fact an orthogonal GDB bug). I expect it is due to the "vpush" there in this case but I did not investigate it more: Dump of assembler code for function pthread_cond_timedwait@@GLIBC_2.4: 0xb6f8757c <+0>: push {r4, r5, r6, r7, r8, r9, r10, r11, lr} 0xb6f87580 <+4>: mov r10, r2 0xb6f87584 <+8>: vpush {d8} Regression tested on armv7l kernel 5.15.32-v7l+ (Raspbian 11). Approved-By: Luis Machado 2023-04-01 GDB Administrator Automatic date update in version.in 2023-03-31 H.J. Lu lto: Don't add indirect symbols for versioned aliases in IR Linker adds indirect symbols for versioned symbol aliases, which are created by ".symver foo, foo@FOO", by checking symbol type, value and section so that references to foo will be replaced by references to foo@FOO if foo and foo@FOO have the same symbol type, value and section. But in IR, since all symbols of the same type have the same value and section, we can't tell if a symbol is an alias of another symbol by their types, values and sections. We shouldn't add indirect symbols for versioned symbol aliases in IR. bfd/ PR ld/30281 * elflink.c (elf_link_add_object_symbols): Don't add indirect symbols for ".symver foo, foo@FOO" aliases in IR. ld/ PR ld/30281 * testsuite/ld-plugin/lto.exp: Add PR ld/30281 test. * testsuite/ld-plugin/pr30281.t: New file. * testsuite/ld-plugin/pr30281.c: Likewise. 2023-03-31 Tom Tromey Fix maybe-uninitialized warning in frame.c A recent patch caused my system gcc (Fedora 36, so gcc 12.2.1) to warn about sym_addr being possibly uninitialized in frame.c. It isn't, but the compiler can't tell. So, this patch initializes the variable. I also fixed a formatting buglet that I missed in review. 2023-03-31 Tom de Vries [gdb/testsuite] Fix gdb.base/trace-commands.exp with editing off With test-case gdb.base/trace-commands.exp and editing off, I run into fails because multi-line commands are issued using gdb_test_sequence, which doesn't handle them correctly. Fix this by using gdb_test instead. Tested on x86_64-linux. PR testsuite/30288 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30288 2023-03-31 Tom de Vries [gdb/testsuite] Fix gdb.threads/threadapply.exp with editing off With test-case gdb.threads/threadapply.exp and editing set to on, we have: ... (gdb) define remove^M Type commands for definition of "remove".^M End with a line saying just "end".^M >remove-inferiors 3^M >end^M (gdb) ... but with editing set to off, we run into: ... (gdb) define remove^M Type commands for definition of "remove".^M End with a line saying just "end".^M >remove-inferiors 3^M end^M >(gdb) FAIL: gdb.threads/threadapply.exp: thread_set=all: try remove: \ define remove (timeout) ... The commands are issued by this test: ... gdb_define_cmd "remove" { "remove-inferiors 3" } ... which does: - gdb_test_multiple "define remove", followed by - gdb_test_multiple "remove-inferiors 3\nend". Proc gdb_test_multiple has special handling for multi-line commands, which splits it up into subcommands, and for each subcommand issues it and then waits for the resulting prompt (the secondary prompt ">" for all but the last subcommand). However, that doesn't work as expected in this case because the initial gdb_test_multiple "define remove" fails to match all resulting output, and consequently the secondary prompt resulting from "define remove" is counted as if it was the one resulting from "remove-inferiors 3". Fix this by matching the entire output of "define remove", including the secondary prompt. Tested on x86_64-linux. PR testsuite/30288 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30288 2023-03-31 Tom Tromey Remove language_demangle I noticed that language_demangle shadows the global "current_language". When I went to fix this, though, I then saw that language_demangle is only called in two places, and has a comment saying it should be removed. This patch removes it. Note that the NULL check in language_demangle is not needed by either of the existing callers. Regression tested on x86-64 Fedora 36. Approved-By: Simon Marchi 2023-03-31 Tom Tromey Fix race in background index-cache writing Tom de Vries pointed out a bug in the index-cache background writer -- sometimes it will fail. He also noted that it fails when the number of worker threads is set to zero. These turn out to be the same problem -- the cache can't be written to until the per-BFD's "index_table" member is set. This patch avoids the race by rearranging the code slightly, to ensure the cache cannot possibly be written before the member is set. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30261 2023-03-31 Richard Bunt GDB: Add `info main' command Allow consumers of GDB to extract the name of the main method. This is most useful for Fortran programs which have a variable main method. Used by both MAP and DDT e.g. it is used to detect the presence of debug information. Co-Authored-By: Maciej W. Rozycki 2023-03-31 Maciej W. Rozycki GDB: Bring back the handling of DW_CC_program Fix a functional regression and restore the handling of DW_CC_program code of DW_AT_calling_convention attribute for determining the name of the starting function of the program where the DW_AT_main_subprogram attribute has not been provided, such as with Fortran code compiled with GCC versions 4.5.4 and below, or where DWARF version 3 or below has been requested. Without it "main" is considered the starting function. Cf. GCC PR fortran/43414. Original code was removed with commit 6209cde4ddb8 ("Delete DWARF psymtab code"), and then an update to complement commit 81873cc81eff ("[gdb/symtab] Support DW_AT_main_subprogram with -readnow.") has also been included here. 2023-03-31 Richard Bunt GDB: Favor full symbol main name for backtrace stop In the case where a Fortran program has a program name of "main" and there is also a minimal symbol called main, such as with programs built with GCC version 4.4.7 or below, the backtrace will erroneously stop at the minimal symbol rather than the user specified main, e.g.: (gdb) bt #0 bar () at .../gdb/testsuite/gdb.fortran/backtrace.f90:17 #1 0x0000000000402556 in foo () at .../gdb/testsuite/gdb.fortran/backtrace.f90:21 #2 0x0000000000402575 in main () at .../gdb/testsuite/gdb.fortran/backtrace.f90:31 #3 0x00000000004025aa in main () (gdb) This patch fixes this issue by increasing the precedence of the full symbol when the language of the current frame is Fortran. Newer versions of GCC transform the program name to "MAIN__" in this case, avoiding the problem. Co-Authored-By: Maciej W. Rozycki 2023-03-31 Ari Hannula gdb: Remove extra if statement The removed if statement is already checked in the parent if else statement. Co-Authored-By: Christina Schimpe 2023-03-31 Tsukasa OI RISC-V: Allocate "various" operand type This commit intends to move operands that require very special handling or operand types that are so minor (e.g. only useful on a few instructions) under "W". I also intend this "W" to be "temporary" operand storage until we can find good two character (or less) operand type. In this commit, prefetch offset operand "f" for 'Zicbop' extension is moved to "Wif" because of its special handling (and allocating single character "f" for this operand type seemed too much). Current expected allocation guideline is as follows: 1. 'W' 2. The most closely related single-letter extension in lowercase (strongly recommended but not mandatory) 3. Identify operand type The author currently plans to allocate following three-character operand types (for operands including instructions from unratified extensions). 1. "Wif" ('Zicbop': fetch offset) 2. "Wfv" (unratified 'Zfa': value operand from FLI.[HSDQ] instructions) 3. "Wfm" / "WfM" 'Zfh', 'F', 'D', 'Q': rounding modes "m" with special handling solely for widening conversion instructions. gas/ChangeLog: * config/tc-riscv.c (validate_riscv_insn, riscv_ip): Move from "f" to "Wif". opcodes/ChangeLog: * riscv-dis.c (print_insn_args): Move from "f" to "Wif". * riscv-opc.c (riscv_opcodes): Reflect new operand type. 2023-03-31 Jan Beulich x86: convert testcases to use .insn This can't be done for all insns currently encoded with .byte. For one outside of 64-bit mode unused (typically ignored) register encoding bits in VEX/XOP/EVEX prefixes can't be set to their non-default values, since the necessary registers cannot be specified (and some of these bits can't even be used outside of 64-bit mode). And then there are odd tests like the first one in bad-bcast.s: Its purpose is to illegaly set EVEX.b together with EVEX.W (which could be expressed; note though EVEX.W set is invalid on its own), but then it also clears EVEX.B and EVEX.R' plus it sets EVEX.vvvv to other than 0xf (rendering the test ambiguous, because that's another #UD reason). In {,x86-64-}disassem.s many bogus encodings exist - some with ModR/M byte but insufficient displacement bytes, some using SIB encoding with the SIB byte actually being the supposed immediate. Some of these could be expressed by .insn, but I don't want to introduce bogus examples. These will all need adjustment anyway once the disassembler is improved in the way it deals with unrecognized encodings. Generally generated code is meant to remain the same. {,x86-64-}nops.d are exceptions because insn prefixes are emitted in a different order. opcode{,-intel,-suffix}.d are also adjusted (along with an according correction to opcode.s) to cover an apparent typo in the original tests (xor when or was meant). Where necessary --divide is added as gas option, to allow for the use of the extension opcode functionality. Comments are being adjusted where obviously wrong/misleading. 2023-03-31 Jan Beulich x86: document .insn ... and mention its introduction in NEWS. 2023-03-31 Jan Beulich x86: handle immediate operands for .insn Since we have no insn suffix and it's also not realistic to infer immediate size from the size of other (typically register) operands (like optimize_imm() does), and since we also don't have a template telling us permitted size(s), a new syntax construct is introduced to allow size (and signedness) specification. In the absence of such, the size is inferred from significant bits (which obviously may yield inconsistent results at least for effectively negative values, depending on whether BFD64 is enabled), and only if supplied expressions can be evaluated at parsing time. Being explicit is generally recommended to users. Size specification is permitted at bit granularity, but of course the eventually emitted immediate values will be padded up to 8-, 16-, 32-, or 64-bit fields. 2023-03-31 Jan Beulich x86: allow for multiple immediates in output_disp() .insn isn't going to have a constraint of only a single immediate when, in particular, RIP-relative addressing is used. x86: handle EVEX Disp8 for .insn In particular the scaling factor cannot always be determined from pre- existing operand attributes. Introduce a new {:d} vector operand syntax extension, restricted to .insn only, to allow specifying this in (at least) otherwise ambiguous cases. 2023-03-31 Jan Beulich x86: process instruction operands for .insn Deal with register and memory operands; immediate operands will follow later, as will the handling of EVEX embedded broadcast and EVEX Disp8 scaling. Note that because we can't really know how to encode their use, %cr8 and up cannot be used with .insn outside of 64-bit mode. Users would need to specify an explicit LOCK prefix in combination with %cr0 etc. 2023-03-31 Jan Beulich x86: parse special opcode modifiers for .insn So called "short form" encoding is specified by a trailing "+r", whereas a possible extension opcode is specified by the usual "/". Take these off the expression before handing it to get_absolute_expression(). Note that on targets where / starts a comment, --divide needs passing to gas in order to make use of the extension opcode functionality. 2023-03-31 Jan Beulich x86: parse VEX and alike specifiers for .insn All encoding spaces can be used this way; there's a certain risk that the bits presently reserved could be used for other purposes down the road, but people using .insn are expected to know what they're doing anyway. Plus this way there's at least _some_ way to have those bits set. For now this will only allow operand-less insns to be encoded this way. 2023-03-31 Jan Beulich x86: introduce .insn directive For starters this deals with only very basic constructs. Arm64/ELF: accept relocations against STN_UNDEF While only a secondary issue there, the testcase of PR gas/27212 exposes an oversight in relocation handling: Just like e.g. Arm32, which has a similar comment and a similar check, relocations against STN_UNDEF have to be permitted to satisfy the ELF spec. 2023-03-31 GDB Administrator Automatic date update in version.in 2023-03-30 Kevin Buettner PR gdb/30219: Clear sync_quit_force_run in quit_force PR 30219 shows an internal error due to a "Bad switch" in print_exception() in gdb/exceptions.c. The switch in question contains cases for RETURN_QUIT and RETURN_ERROR, but is missing a case for the recently added RETURN_FORCED_QUIT. This commit adds that case. Making the above change allows the errant test case to pass, but does not fix the underlying problem, which I'll describe shortly. Even though the addition of a case for RETURN_FORCED_QUIT isn't the actual fix, I still think it's important to add this case so that other situations which lead to print_exeption() being called won't generate that "Bad switch" internal error. In order to understand the underlying problem, please examine this portion of the backtrace from the bug report: 0x5576e4ff5780 print_exception /home/smarchi/src/binutils-gdb/gdb/exceptions.c:100 0x5576e4ff5930 exception_print(ui_file*, gdb_exception const&) /home/smarchi/src/binutils-gdb/gdb/exceptions.c:110 0x5576e6a896dd quit_force(int*, int) /home/smarchi/src/binutils-gdb/gdb/top.c:1849 The real problem is in quit_force; here's the try/catch which eventually leads to the internal error: /* Get out of tfind mode, and kill or detach all inferiors. */ try { disconnect_tracing (); for (inferior *inf : all_inferiors ()) kill_or_detach (inf, from_tty); } catch (const gdb_exception &ex) { exception_print (gdb_stderr, ex); } While running the calls in the try-block, a QUIT check is being performed. This check finds that sync_quit_force_run is (still) set, causing a gdb_exception_forced_quit to be thrown. The exception gdb_exception_forced_quit is derived from gdb_exception, causing exception_print to be called. As shown by the backtrace, print_exception is then called, leading to the internal error. The actual fix, also implemented by this commit, is to clear sync_quit_force_run along with the quit flag. This will allow the various cleanup code, called by quit_force, to run without triggering a gdb_exception_forced_quit. (Though, if another SIGTERM is sent to the gdb process, these flags will be set again and a QUIT check in the cleanup code will detect it and throw the exception.) Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30219 Approved-By: Simon Marchi 2023-03-30 Richard Sandiford aarch64: Remove stray reglist variable Sorry for not catching this during testing. I was using a host compiler that predated the switch to -fno-common. 2023-03-30 Richard Sandiford aarch64: Add the RPRFM instruction This patch adds the RPRFM (range prefetch) instruction. It was introduced as part of SME2, but it belongs to the prefetch hint space and so doesn't require any specific ISA flags. The aarch64_rprfmop_array initialiser (deliberately) only fills in the leading non-null elements. 2023-03-30 Richard Sandiford aarch64: Add the SVE FCLAMP instruction aarch64: Add new SVE shift instructions This patch adds the new SVE SQRSHRN, SQRSHRUN and UQRSHRN instructions. aarch64: Add new SVE saturating conversion instructions This patch adds the SVE SQCVTN, SQCVTUN and UQCVTN instructions, which are available when FEAT_SME2 is implemented. aarch64: Add new SVE dot-product instructions This patch adds the SVE FDOT, SDOT and UDOT instructions, which are available when FEAT_SME2 is implemented. The patch also reorders the existing SVE_Zm3_22_INDEX to keep the operands numerically sorted. aarch64: Add the SVE BFMLSL instructions This patch adds the SVE BFMLSLB and BFMLSLT instructions, which are available when FEAT_SME2 is implemented. aarch64: Add the SME2 UZP and ZIP instructions This patch adds UZP and ZIP, which combine UZP{1,2} and ZIP{1,2} into single instructions. aarch64: Add the SME2 UNPK instructions This patch adds SUNPK and UUNPK, which unpack one register's worth of elements to two registers' worth, or two registers' worth to four registers' worth. 2023-03-30 Richard Sandiford aarch64: Add the SME2 shift instructions There are two instruction formats here: - SQRSHR, SQRSHRU and UQRSHR, which operate on lists of two or four registers. - SQRSHRN, SQRSHRUN and UQRSHRN, which operate on lists of four registers. These are the first SME2 instructions to have immediate operands. The patch makes sure that, when parsing SME2 instructions with immediate operands, the new predicate-as-counter registers are parsed as registers rather than as #-less immediates. 2023-03-30 Richard Sandiford aarch64: Add the SME2 saturating conversion instructions There are two instruction formats here: - SQCVT, SQCVTU and UQCVT, which operate on lists of two or four registers. - SQCVTN, SQCVTUN and UQCVTN, which operate on lists of four registers. 2023-03-30 Richard Sandiford aarch64: Add the SME2 FP<->FP conversion instructions This patch adds the BFCVT{,N} and FCVT{,N} instructions, which narrow a pair of .S registers to a single .H register. aarch64: Add the SME2 FP<->int conversion instructions This patch adds the SME2 versions of the FP<->integer conversion instructions FCVT* and *CVTF. It also adds FP rounding instructions FRINT*, which share the same format. aarch64: Add the SME2 CLAMP instructions FCLAMP, SCLAMP and UCLAMP share the same format, although FCLAMP doesn't have a .B form. aarch64: Add the SME2 MOPA and MOPS instructions [BSU]MOP[AS] share the same format. 2023-03-30 Richard Sandiford aarch64: Add the SME2 vertical dot-product instructions There are three instruction formats here: - BFVDOT + FVDOT - SVDOT + UVDOT - SUVDOT + USVDOT There are also 64-bit forms of SVDOT and UVDOT. 2023-03-30 Richard Sandiford aarch64: Add the SME2 dot-product instructions BFDOT, FDOT and USDOT share the same instruction format. SDOT and UDOT share a different format. SUDOT does not have the multi vector x multi vector forms, since they would be redundant with USDOT. aarch64: Add the SME2 MLALL and MLSLL instructions SMLALL, SMLSLL, UMLALL and UMLSLL have the same format. USMLALL and SUMLALL allow the same operand types as those instructions, except that SUMLALL does not have the multi-vector x multi-vector forms (which would be redundant with USMLALL). aarch64: Add the SME2 MLAL and MLSL instructions The {BF,F,S,U}MLAL and {BF,F,S,U}MLSL instructions share the same encoding. They are the first instance of a ZA (as opposed to ZA tile) operand having a range of offsets. As with ZA tiles, the expected range size is encoded in the operand-specific data field. aarch64: Add the SME2 FMLA and FMLS instructions aarch64: Add the SME2 maximum/minimum instructions This patch adds the SME2 multi-register forms of F{MAX,MIN}{,NM} and {S,U}{MAX,MIN}. SQDMULH, SRSHL and URSHL have the same form as SMAX etc., so the patch adds them too. 2023-03-30 Richard Sandiford aarch64: Add the SME2 ADD and SUB instructions Add support for the SME2 ADD. SUB, FADD and FSUB instructions. SUB and FSUB have the same form as ADD and FADD, except that ADD also has a 2-operand accumulating form. The 64-bit ADD/SUB instructions require FEAT_SME_I16I64 and the 64-bit FADD/FSUB instructions require FEAT_SME_F64F64. These are the first instructions to have tied register list operands, as opposed to tied single registers. The parse_operands change prevents unsuffixed Z registers (width==-1) from being treated as though they had an Advanced SIMD-style suffix (.4s etc.). It means that: Error: expected element type rather than vector type at operand 2 -- `add za\.s\[w8,0\],{z0-z1}' becomes: Error: missing type suffix at operand 2 -- `add za\.s\[w8,0\],{z0-z1}' 2023-03-30 Richard Sandiford aarch64: Add the SME2 ZT0 instructions SME2 adds lookup table instructions for quantisation. They use a new lookup table register called ZT0. LUTI2 takes an unsuffixed SVE vector index of the form Zn[], which is the first time that this syntax has been used. 2023-03-30 Richard Sandiford aarch64: Add the SME2 predicate-related instructions Implementation-wise, the main things to note here are: - the WHILE* instructions have forms that return a pair of predicate registers. This is the first time that we've had lists of predicate registers, and they wrap around after register 15 rather than after register 31. - the predicate-as-counter WHILE* instructions have a fourth operand that specifies the vector length. We can treat this as an enumeration, except that immediate values aren't allowed. - PEXT takes an unsuffixed predicate index of the form PN[]. This is the first instance of a vector/predicate index having no suffix. 2023-03-30 Richard Sandiford aarch64: Add the SME2 multivector LD1 and ST1 instructions SME2 adds LD1 and ST1 variants for lists of 2 and 4 registers. The registers can be consecutive or strided. In the strided case, 2-register lists have a stride of 8, starting at register x0xxx. 4-register lists have a stride of 4, starting at register x00xx. The instructions are predicated on a predicate-as-counter register in the range pn8-pn15. Although we already had register fields with upper bounds of 7 and 15, this is the first plain register operand to have a nonzero lower bound. The patch uses the operand-specific data field to record the minimum value, rather than having separate inserters and extractors for each lower bound. This in turn required adding an extra bit to the field. 2023-03-30 Richard Sandiford aarch64: Add the SME2 MOVA instructions SME2 defines new MOVA instructions for moving multiple registers to and from ZA. As with SME, the instructions are also available through MOV aliases. One notable feature of these instructions (and many other SME2 instructions) is that some register lists must start at a multiple of the list's size. The patch uses the general error "start register out of range" when this constraint isn't met, rather than an error specifically about multiples. This ensures that the error is consistent between these simple consecutive lists and later strided lists, for which the requirements aren't a simple multiple. 2023-03-30 Richard Sandiford aarch64: Add support for predicate-as-counter registers SME2 adds a new format for the existing SVE predicate registers: predicates as counters rather than predicates as masks. In assembly code, operands that interpret predicates as counters are written pn rather than p. This patch adds support for these registers and extends some existing instructions to support them. Since the new forms are just a programmer convenience, there's no need to make them more restrictive than the earlier predicate-as-mask forms. 2023-03-30 Richard Sandiford aarch64; Add support for vector offset ranges Some SME2 instructions operate on a range of consecutive ZA vectors. This is indicated by syntax such as: za[, :] Like with the earlier vgx2 and vgx4 support, we get better error messages if the parser allows all ZA indices to have a range. We can then reject invalid cases during constraint checking. 2023-03-30 Richard Sandiford aarch64: Add support for vgx2 and vgx4 Many SME2 instructions operate on groups of 2 or 4 ZA vectors. This is indicated by adding a "vgx2" or "vgx4" group size to the ZA index. The group size is optional in assembly but preferred for disassembly. There is not a binary distinction between mnemonics that have group sizes and mnemonics that don't, nor between mnemonics that take vgx2 and mnemonics that take vgx4. We therefore get better error messages if we allow any ZA index to have a group size during parsing, and wait until constraint checking to reject invalid sizes. A quirk of the way errors are reported means that if an instruction is wrong both in its qualifiers and its use of a group size, we'll print suggested alternative instructions that also have an incorrect group size. But that's a general property that also applies to things like out-of-range immediates. It's also not obviously the wrong thing to do. We need to be relatively confident that we're looking at the right opcode before reporting detailed operand-specific errors, so doing qualifier checking first seems resonable. 2023-03-30 Richard Sandiford aarch64: Add _off4 suffix to AARCH64_OPND_SME_ZA_array SME2 adds various new fields that are similar to AARCH64_OPND_SME_ZA_array, but are distinguished by the size of their offset fields. This patch adds _off4 to the name of the field that we already have. aarch64: Add a _10 suffix to FLD_imm3 SME2 adds various new 3-bit immediate fields, so this patch adds an lsb position suffix to the name of the field that we already have. aarch64: Add +sme2 This patch adds bare-bones support for +sme2. Later patches fill in the rest. 2023-03-30 Richard Sandiford aarch64: Prefer register ranges & support wrapping Until now, binutils has supported register ranges such as { v0.4s - v3.4s } as an unofficial shorthand for { v0.4s, v1.4s, v2.4s, v3.4s }. The SME2 ISA embraces this form and makes it the preferred disassembly. It also embraces wrapped lists such as { z31.s - z2.s }, which is something that binutils didn't previously allow. The range form was already binutils's preferred disassembly for 3- and 4-register lists. This patch prefers it for 2-register lists too. The patch also adds support for wrap-around. 2023-03-30 Richard Sandiford aarch64: Add support for strided register lists SME2 has instructions that accept strided register lists, such as { z0.s, z4.s, z8.s, z12.s }. The purpose of this patch is to extend binutils to support such lists. The parsing code already had (unused) support for strides of 2. The idea here is instead to accept all strides during parsing and reject invalid strides during constraint checking. The SME2 instructions that accept strided operands also have non-strided forms. The errors about invalid strides therefore take a bitmask of acceptable strides, which allows multiple possibilities to be summed up in a single message. I've tried to update all code that handles register lists. 2023-03-30 Richard Sandiford aarch64: Sort fields alphanumerically This patch just sorts the field enum alphanumerically, which makes it easier to see if a particular field has already been defined. aarch64: Resync field names This patch just makes the comments in aarch64-opc.c:fields match the names of the associated FLD_* enum. 2023-03-30 Richard Sandiford aarch64: Regularise FLD_* suffixes Some FLD_imm* suffixes used a counting scheme such as FLD_immN, FLD_immN_2, FLD_immN_3, etc., while others used the lsb as the suffix. The latter seems more mnemonic, and was a big help in doing the SME2 work. Similarly, the _10 suffix on FLD_SME_size_10 was nonobvious. Presumably it indicated a 2-bit field, but it actually starts in bit 22. 2023-03-30 Richard Sandiford aarch64: Rename some of GAS's REG_TYPE_* macros In GAS, the vector and predicate registers are identified by REG_TYPE_VN, REG_TYPE_ZN and REG_TYPE_PN. This "N" is obviously a placeholder for the register number. However, we don't use that convention for integer and FP registers, and (more importantly) SME2 adds "predicate-as-counter" registers that are denoted PN. This patch therefore drops the "N" suffix from the existing registers. The main hitch is that Z was also used for the zero register in things like R_Z, but using ZR seems more consistent with the SP-based names. 2023-03-30 Richard Sandiford aarch64: Add a aarch64_cpu_supports_inst_p helper Quite a lot of SME2 instructions have an opcode bit that selects between 32-bit and 64-bit forms of an instruction, with the 32-bit forms being part of base SME2 and with the 64-bit forms being part of an optional extension. It's nevertheless useful to have a single opcode entry for both forms since (a) that matches the ISA definition and (b) it tends to improve error reporting. This patch therefore adds a libopcodes function called aarch64_cpu_supports_inst_p that tests whether the target supports a particular instruction. In future it will depend on internal libopcodes routines. 2023-03-30 Richard Sandiford aarch64: Reorder some OP_SVE_* macros This patch just moves some out-of-order-looking OP_SVE_* macros. aarch64: Rename aarch64-tbl.h OP_SME_* macros This patch renames the OP_SME_* macros in aarch64-tbl.h so that they follow the same scheme as the OP_SVE_* ones. It also uses OP_SVE_ as the prefix, since there is no real distinction between the SVE and SME uses of qualifiers: a macro defined for one can be useful for the other too. 2023-03-30 Richard Sandiford aarch64: Tweak priorities of parsing-related errors There are three main kinds of error reported during parsing, in increasing order of priority: - AARCH64_OPDE_RECOVERABLE (register seen instead of immediate) - AARCH64_OPDE_SYNTAX_ERROR - AARCH64_OPDE_FATAL_SYNTAX_ERROR This priority makes sense when comparing errors reported against the same operand. But if we get to operand 3 (say) and see a register instead of an immediate, that's likely to be a better match than something that fails with a syntax error at operand 1. The idea of this patch is to prioritise parsing-related errors based on operand index first, then by error code. Post-parsing errors still win over parsing errors, and their relative priorities don't change. 2023-03-30 Richard Sandiford aarch64: Try to report invalid variants against the closest match If an instruction has invalid qualifiers, GAS would report the error against the final opcode entry that got to the qualifier- checking stage. It seems better to report the error against the opcode entry that had the closest match, just like we pick the closest match within an opcode entry for the "did you mean this?" message. This patch adds the number of invalid operands as an argument to AARCH64_OPDE_INVALID_VARIANT and then picks the AARCH64_OPDE_INVALID_VARIANT with the lowest argument. 2023-03-30 Richard Sandiford aarch64: Tweak register list errors The error for invalid register lists had the form: invalid number of registers in the list; N registers are expected at operand M -- `insn' This seems a bit verbose. Also, the "bracketing" is really: (invalid number of registers in the list; N registers are expected) at operand M but the semicolon works against that. This patch goes for slightly shorter messages, setting a template that later patches can use for more complex cases. 2023-03-30 Richard Sandiford aarch64: Make AARCH64_OPDE_REG_LIST take a bitfield AARCH64_OPDE_REG_LIST took a single operand that specified the expected number of registers. However, there are quite a few SME2 instructions that have both 2-register forms and (separate) 4-register forms. If the user tries to use a 3-register list, it isn't obvious which opcode entry they meant. Saying that we expect 2 registers and saying that we expect 4 registers would both be wrong. This patch therefore switches the operand to a bitfield. If a AARCH64_OPDE_REG_LIST is reported against multiple opcode entries, the patch ORs up the expected lengths. This has no user-visible effect yet. A later patch adds more error strings, alongside tests that use them. 2023-03-30 Richard Sandiford aarch64: Add an operand class for SVE register lists SVE register lists were classified as SVE_REG, since there had been no particular reason to separate them out. However, some SME2 instructions have tied register list operands, and so we need to distinguish registers and register lists when checking whether two operands match. Also, the register list operands used a general error message, even though we already have a dedicated error code for register lists that are the wrong length. 2023-03-30 Richard Sandiford aarch64: Commonise checks for index operands This patch splits out the constraint checking for index operands, so that it can be reused by new SME2 operands. aarch64: Add an error code for out-of-range registers libopcodes currently reports out-of-range registers as a general AARCH64_OPDE_OTHER_ERROR. However, this means that each register range needs its own hard-coded string, which is a bit cumbersome if the range is determined programmatically. This patch therefore adds a dedicated error type for out-of-range errors. 2023-03-30 Richard Sandiford aarch64: Deprioritise AARCH64_OPDE_REG_LIST SME2 has many instructions that take a list of SVE registers. There are often multiple forms, with different forms taking different numbers of registers. This means that if, after a successful parse and qualifier match, we find that the number of registers does not match the opcode entry, the associated error should have a lower priority/severity than other errors reported at the same stage. For example, if there are 2-register and 4-register forms of an instruction, and if the assembly code uses the 2-register form with an out-of-range value, the out-of-range value error against the 2-register instruction should have a higher priority than the "wrong number of registers" error against the 4-register instruction. This is tested by the main SME2 patches, but seemed worth splitting out. 2023-03-30 Richard Sandiford aarch64: Update operand_mismatch_kind_names The contents of operand_mismatch_kind_names were out of sync with the enum. 2023-03-30 Richard Sandiford aarch64: Rework reporting of failed register checks There are many opcode table entries that share the same mnemonic. Trying to parse an invalid assembly line will trigger an error for each of these entries, but the specific error might vary from one entry to another, depending on the exact nature of the problem. GAS has quite an elaborate system for picking the most appropriate error out of all the failed matches. And in many cases it works well. However, one of the limitations is that the error is always reported against a single opcode table entry. If that table entry isn't the one that the user intended to use, then the error can end up being overly specific. This is particularly true if an instruction has a typoed register name, or uses a type of register that is not accepted by any opcode table entry. For example, one of the expected error matches for an attempted SVE2 instruction is: Error: operand 1 must be a SIMD scalar register -- `addp z32\.s,p0/m,z32\.s,z0\.s' even though the hypothetical user was presumably attempting to use the SVE form of ADDP rather than the Advanced SIMD one. There are many other instances of this in the testsuite. The problem becomes especially acute with SME2, since many SME2 instructions reuse existing mnemonics. This could lead to us reporting an SME-related error against a non-SME instruction, or a non-SME-related error against an SME instruction. This patch tries to improve things by collecting together all the register types that an opcode table entry expected for a given operand. It also records what kind of register was actually seen, if any. It then tries to summarise all this in a more directed way, falling back to a generic error if the combination defies a neat summary. The patch includes tests for all new messages except REG_TYPE_ZA, which only triggers with SME2. To test this, I created an assembly file that contained the cross product of all known mnemonics and one example from each register class. I then looked for cases where the new routines fell back on the generic errors ("expected a register" or "unexpected register type"). I locally added dummy messages for each one until there were no more hits. The patch adds a specimen instruction to diagnostics.s for each of these combinations. In each case, the combination didn't seem like something that could be summarised in a natural way, so the generic messages seemed better. There's always going to be an element of personal taste around this kind of thing though. Adding more register types made 1< aarch64: Try to avoid inappropriate default errors After parsing a '{' and the first register, parse_typed_reg would report errors in subsequent registers in the same way as for the first register. It used set_default_error, which reports errors of the form "operand N must be X". The problem is that if there are multiple opcode entries for the same mnemonic, there could be several matches that lead to a default error. There's no guarantee that the default error for the register list is the one that will be chosen. To take an example from the testsuite: ext z0.b,{z31.b,z32.b},#0 gave: operand 2 must be an SVE vector register with the error being reported against the single-vector version of ext, even though the operand is clearly a list. This patch uses set_fatal_syntax_error to bump the priority of the error once we're sure that the operand is a list of the right type. 2023-03-30 Richard Sandiford aarch64: Improve errors for malformed register lists parse_typed_reg is used for parsing both bare registers and registers that occur in lists. If it doesn't see a register, or sees an unexpected kind of register, it queues a default error to report the problem. These default errors have the form "operand N must be an X", where X comes from the operand table. If there are multiple opcode entries that report default errors, GAS tries to pick the most appropriate one, using the opcode table order as a tiebreaker. But this can lead to cases where a syntax error in a register list is reported against an opcode that doesn't accept register lists. For example, the unlikely error: ext z0.b,{,},#0 is reported as: operand 2 must be an SVE vector register -- `ext z0.b,{,},#0' even though operand 2 can be a register list. If we've parsed the opening '{' of a register list, and then see something that isn't remotely register-like, it seems better to report that directly as a syntax error, rather than rely on the default error. The operand won't be a valid list of anything, so there's no need to pick a specific Y in "operand N must be a list of Y". 2023-03-30 Richard Sandiford aarch64: Tweak parsing of integer & FP registers Integer registers were parsed indirectly through aarch64_reg_parse_32_64 (and thus aarch64_addr_reg_parse) rather than directly through parse_reg. This was because we need the qualifier associated with the register, and the logic to calculate that was buried in aarch64_addr_reg_parse. The code that parses FP registers had the same need, but it open-coded the calculation of the qualifier. This patch tries to handle both cases in the same way. It is needed by a later patch that tries to improve the register-related diagnostics. 2023-03-30 Richard Sandiford aarch64: Tweak errors for base & offset registers parse_address_main currently uses get_reg_expected_msg to report invalid base and offset registers, but the disadvantage of doing that is that it isn't immediately clear which register is wrong (the base or the offset). A later patch moves away from using get_reg_expected_msg for failed type checks, but doing that here didn't seem like the best approach. The patch tries to use more tailored messages instead. 2023-03-30 Richard Sandiford aarch64: Tweak error for missing immediate offset This patch tweaks the error message that is printed when a ZA-style index is missing the immediate offset. 2023-03-30 Richard Sandiford aarch64: Move w12-w15 range check to libopcodes In SME, the vector select register had to be in the range w12-w15, so it made sense to enforce that during parsing. However, SME2 adds instructions for which the range is w8-w11 instead. This patch therefore moves the range check from the parsing stage to the constraint-checking stage. Also, the previous error used a capitalised range W12-W15, whereas other register range errors used lowercase ranges like p0-p7. A quick internal poll showed a preference for the lowercase form, so the patch uses that. The patch uses "selection register" rather than "vector select register" so that the terminology extends more naturally to PSEL. 2023-03-30 Richard Sandiford aarch64: Commonise index parsing Just a minor clean-up to factor out the index parsing, partly to ensure that the error handling remains consistent. No behavioural change intended. 2023-03-30 Richard Sandiford aarch64: Consolidate ZA slice parsing Now that parse_typed_reg checks the range of tile register numbers and libopcodes checks the range of vector select offsets, there's very little difference between the parsing of ZA tile indices, ZA array indices, and PSEL indices. The main one is that ZA array indices don't currently allow "za" to be qualified, but we need to remove that restriction for SME2. This patch therefore consolidates all three parsers into a single routine, parameterised by the type of register that they expect. 2023-03-30 Richard Sandiford aarch64: Move ZA range checks to aarch64-opc.c This patch moves the range checks on ZA vector select offsets from gas to libopcodes. Doing the checks there means that the error messages contain the expected range. It also fits in better with the error severity scheme, which becomes important later. (This is because out-of-range indices are treated as more severe than syntax errors, on the basis that parsing must have succeeded if we get to the point of checking the completed opcode.) The patch also adds a new check_za_access function for checking ZA accesses. That's a bit over the top for one offset check, but the function becomes more complex with later patches. sme-9-illegal.s checked for an invalid .q suffix using: psel p1, p15, p3.q[w15] but this is doubly invalid because it misses the immediate part of the index. The patch keeps that test but adds another with a zero index, so that .q is the only thing wrong. The aarch64-tbl.h change includes neatening up the backslash positions. 2023-03-30 Richard Sandiford aarch64: Pass aarch64_indexed_za to parsers ZA indices have more parts than most operands, so passing these parts around individually is more awkward than for other operand types. Things aren't too bad at the moment, but SME2 adds two further pieces: an offset range and a vector group size. This patch therefore replaces arguments for the individual pieces with a single argument for the index as a whole. 2023-03-30 Richard Sandiford aarch64: Make indexed_za use 64-bit immediates A later patch moves the range checking for ZA vector select offsets from gas to libopcodes. That in turn requires the immediate field to be big enough to support all parsed values. This shouldn't be a particularly size-sensitive structure, so there should be no memory problems with doing this. 2023-03-30 Richard Sandiford aarch64: Rename za_tile_vector to za_index za_tile_vector is also used for indexing ZA as a whole, rather than just for indexing tiles. The former is more common than the latter in SME2, so this patch generalises the name to "indexed_za". The patch also names the associated structure, so that later patches can reuse it during parsing. 2023-03-30 Richard Sandiford aarch64: Treat ZA as a register We already treat the ZA tiles ZA0-ZA15 as registers. This patch does the same for ZA itself. parse_sme_zero_mask can then parse ZA tiles and ZA in the same way, through parsed_type_reg. One important effect of going through parsed_type_reg (in general) is that it allows ZA to take qualifiers. This is necessary for many SME2 instructions. However, to support existing unqualified uses of ZA, parse_reg_with_qual needs to treat the qualiier as optional. Hopefully the net effect is to give better error messages, since now that SME2 makes "za." valid in some contexts, it might be natural to use it (incorrectly) in ZERO too. While there, the patch also tweaks the error messages for invalid ZA tiles, to try to make some cases more specific. For now, parse_sme_za_array just uses parse_reg, rather than parse_typed_reg/parse_reg_with_qual. A later patch consolidates the parsing further. 2023-03-30 Richard Sandiford aarch64: Consolidate ZA tile range checks Now that all parsing of ZA tile names goes through parse_typed_reg, we can check there for out-of-range tile numbers. The other check performed by parse_sme_zada_operand was to reject .q, but that can now be done via F_STRICT instead. (.q tiles are valid in other contexts, so they shouldn't be rejected in parse_typed_reg.) aarch64: Reuse parse_typed_reg for ZA tiles This patch reuses the general parse_typed_reg for ZA tiles. This involves adding a way of suppressing the usual treatment of register indices, since ZA indices look very different from Advanced SIMD and SVE vector indices. 2023-03-30 Richard Sandiford aarch64: Rework parse_typed_reg interface parse_typed_reg returned a register number and passed the register type back using a pointer parameter. It seems simpler to return the register entry instead, since that has both pieces of information in one place. The patch also replaces the boolean in_reg_list parameter with a mask of flags. This hopefully makes calls easier to read (more self-documenting than "true" or "false"), but more importantly, it allows a later patch to add a second flag. 2023-03-30 Richard Sandiford aarch64: Move vectype_to_qualifier further up This patch just moves vectype_to_qualifier further up, so that a later patch can call it at an earlier point in the file. No behavioural change intended. aarch64: Add REG_TYPE_ZATHV This patch adds a multi-register type that includes both REG_TYPE_ZATH and REG_TYPE_ZATV. This slightly simplifies the existing code, but the main purpose is to enable later patches. 2023-03-30 Richard Sandiford aarch64: Rename REG_TYPE_ZA* to REG_TYPE_ZAT* The ZA tile registers were called REG_TYPE_ZA, REG_TYPE_ZAH and REG_TYPE_ZAV. However, a later patch wants to make plain "za" a register type too, and REG_TYPE_ZA is the obvious name for that. This patch therefore adds "T" (tile) to the existing names. 2023-03-30 Richard Sandiford aarch64: Use aarch64_operand_error more widely GAS's aarch64_instruction had its own cut-down error record, but it's better for later patches if it reuses the binutils-wide aarch64_operand_error instead. The main difference is that aarch64_operand_error can store arguments to the error while aarch64_instruction couldn't. 2023-03-30 Richard Sandiford aarch64: Make SME instructions use F_STRICT This patch makes all SME instructions use F_STRICT, so that qualifiers have to be provided explicitly rather than being inferred from other operands. The main change is to move the qualifier setting from the operand-level decoders to the opcode level. This is one step towards consolidating the ZA parsing code and extending it to handle SME2. 2023-03-30 Richard Sandiford aarch64: Fix SVE2 register/immediate distinction GAS refuses to interpret register names like x0 as unadorned immediates, due to the obvious potential for confusion with register operands. (An explicit #x0 is OK.) For compatibility reasons, we can't extend the set of registers that GAS rejects for existing instructions. For example: mov x0, z0 was valid code before SVE was added, so it needs to stay valid code even when SVE is enabled. But we can make GAS reject newer registers in newer instructions. The SVE instruction: and z0.s, z0.s, z0.h is therefore invalid, rather than z0.h being an immediate. This patch extends the SVE behaviour to SVE2. The old call to AARCH64_CPU_HAS_FEATURE was technically the wrong way around, although it didn't matter in practice for base SVE instructions since their avariants only set SVE. 2023-03-30 Richard Sandiford aarch64: Restrict range of PRFM opcodes In the register-index forms of PRFM, the unallocated prefetch opcodes 24-31 have been reused for the encoding of the new RPRFM instruction. The PRFM opcode space is now capped at 23 for these forms. The other forms of PRFM are unaffected. aarch64: Fix PSEL opcode mask The opcode mask for PSEL was missing some bits, which meant that some upcoming SME2 opcodes would be misinterpreted as PSELs. aarch64: Add sme-i16i64 and sme-f64f64 aliases Most extension flags are named after the associated architectural FEAT_* flags, but sme-i64 and sme-f64 were exceptions. This patch adds sme-i16i64 and sme-f64f64 aliases, but keeps the old names too for compatibility. 2023-03-30 Nick Clifton Fix an illegal memory access triggered by parsing corrupt DWARF info. PR 30284 * dwarf.c (read_and_display_attr_value): Detect and ignore negative base values. 2023-03-30 Andrew Burgess gdb/python: Add new gdb.unwinder.FrameId class When writing an unwinder it is necessary to create a new class to act as a frame-id. This new class is almost certainly just going to set a 'sp' and 'pc' attribute within the instance. This commit adds a little helper class gdb.unwinder.FrameId that does this job. Users can make use of this to avoid having to write out standard boilerplate code any time they write an unwinder. Of course, if the user wants their FrameId class to be more complicated in some way, then they can still write their own class, just like they could before. I've simplified the example code in the documentation to now use the new helper class, and I've also made use of this helper within the testsuite. Any existing user code will continue to work just as it did before after this change. Reviewed-By: Eli Zaretskii Reviewed-By: Tom Tromey 2023-03-30 Andrew Burgess gdb/python: Allow gdb.UnwindInfo to be created with non gdb.Value args Currently when creating a gdb.UnwindInfo object a user must call gdb.PendingFrame.create_unwind_info and pass a frame-id object. The frame-id object should have at least a 'sp' attribute, and probably a 'pc' attribute too (it can also, in some cases have a 'special' attribute). Currently all of these frame-id attributes need to be gdb.Value objects, but the only reason for that requirement is that we have some code in py-unwind.c that only handles gdb.Value objects. If instead we switch to using get_addr_from_python in py-utils.c then we will support both gdb.Value objects and also raw numbers, which might make things simpler in some cases. So, I started rewriting pyuw_object_attribute_to_pointer (in py-unwind.c) to use get_addr_from_python. However, while looking at the code I noticed a problem. The pyuw_object_attribute_to_pointer function returns a boolean flag, if everything goes OK we return true, but we return false in two cases, (1) when the attribute is not present, which might be acceptable, or might be an error, and (2) when we get an error trying to extract the attribute value, in which case a Python error will have been set. Now in pending_framepy_create_unwind_info we have this code: if (!pyuw_object_attribute_to_pointer (pyo_frame_id, "sp", &sp)) { PyErr_SetString (PyExc_ValueError, _("frame_id should have 'sp' attribute.")); return NULL; } Notice how we always set an error. This will override any error that is already set. So, if you create a frame-id object that has an 'sp' attribute, but the attribute is not a gdb.Value, then currently we fail to extract the attribute value (it's not a gdb.Value) and set this error in pyuw_object_attribute_to_pointer: rc = pyuw_value_obj_to_pointer (pyo_value.get (), addr); if (!rc) PyErr_Format ( PyExc_ValueError, _("The value of the '%s' attribute is not a pointer."), attr_name); Then we return to pending_framepy_create_unwind_info and immediately override this error with the error about 'sp' being missing. This all feels very confused. Here's my proposed solution: pyuw_object_attribute_to_pointer will now return a tri-state enum, with states OK, MISSING, or ERROR. The meanings of these states are: OK - Attribute exists and was extracted fine, MISSING - Attribute doesn't exist, no Python error was set. ERROR - Attribute does exist, but there was an error while extracting it, a Python error was set. We need to update pending_framepy_create_unwind_info, the only user of pyuw_object_attribute_to_pointer, but now I think things are much clearer. Errors from lower levels are not blindly overridden with the generic meaningless error message, but we still get the "missing 'sp' attribute" error when appropriate. This change also includes the switch to get_addr_from_python which was what started this whole journey. For well behaving user code there should be no visible changes after this commit. For user code that hits an error, hopefully the new errors should be more helpful in figuring out what's gone wrong. Additionally, users can now use integers for the 'sp' and 'pc' attributes in their frame-id objects if that is useful. Reviewed-By: Tom Tromey 2023-03-30 Andrew Burgess gdb: have value_as_address call unpack_pointer While refactoring some other code in gdb/python/* I wanted to merge two code paths. One path calls value_as_address, while the other calls unpack_pointer. I suspect calling value_as_address is the correct choice, but, while examining the code I noticed that value_as_address calls unpack_long rather than unpack_pointer. Under the hood, unpack_pointer does just call unpack_long so there's no real difference here, but it feels like value_as_address should call unpack_pointer. I've updated the code to use unpack_pointer, and changed a related comment to say that we call unpack_pointer. I've also adjusted the header comment on value_as_address. The existing header refers to some code that is now commented out. Rather than trying to describe the whole algorithm of value_as_address, which is already well commented within the function, I've just trimmed the comment on value_as_address to be a brief summary of what the function does. There should be no user visible changes after this commit. Reviewed-By: Tom Tromey 2023-03-30 Andrew Burgess gdb/python: remove Py_TPFLAGS_BASETYPE from gdb.UnwindInfo It is not currently possible to directly create gdb.UnwindInfo instances, they need to be created by calling gdb.PendingFrame.create_unwind_info so that the newly created UnwindInfo can be linked to the pending frame. As such there's no tp_init method defined for UnwindInfo. A consequence of all this is that it doesn't really make sense to allow sub-classing of gdb.UnwindInfo. Any sub-class can't call the parents __init__ method to correctly link up the PendingFrame object (there is no parent __init__ method). And any instances that sub-classes UnwindInfo but doesn't call the parent __init__ is going to be invalid for use in GDB. This commit removes the Py_TPFLAGS_BASETYPE flag from the UnwindInfo class, which prevents the class being sub-classed. Then I've added a test to check that this is indeed prevented. Any functional user code will not have any issues with this change. Reviewed-By: Tom Tromey 2023-03-30 Andrew Burgess gdb/python: add __repr__ for PendingFrame and UnwindInfo Having a useful __repr__ method can make debugging Python code that little bit easier. This commit adds __repr__ for gdb.PendingFrame and gdb.UnwindInfo classes, along with some tests. Reviewed-By: Tom Tromey 2023-03-30 Andrew Burgess gdb/python: add some additional methods to gdb.PendingFrame The gdb.Frame class has far more methods than gdb.PendingFrame. Given that a PendingFrame hasn't yet been claimed by an unwinder, there is a limit to which methods we can add to it, but many of the methods that the Frame class has, the PendingFrame class could also support. In this commit I've added those methods to PendingFrame that I believe are safe. In terms of implementation: if I was starting from scratch then I would implement many of these (or most of these) as attributes rather than methods. However, given both Frame and PendingFrame are just different representation of a frame, I think there is value in keeping the interface for the two classes the same. For this reason everything here is a method -- that's what the Frame class does. The new methods I've added are: - gdb.PendingFrame.is_valid: Return True if the pending frame object is valid. - gdb.PendingFrame.name: Return the name for the frame's function, or None. - gdb.PendingFrame.pc: Return the $pc register value for this frame. - gdb.PendingFrame.language: Return a string containing the language for this frame, or None. - gdb.PendingFrame.find_sal: Return a gdb.Symtab_and_line object for the current location within the pending frame, or None. - gdb.PendingFrame.block: Return a gdb.Block for the current pending frame, or None. - gdb.PendingFrame.function: Return a gdb.Symbol for the current pending frame, or None. In every case I've just copied the implementation over from gdb.Frame and cleaned the code slightly e.g. NULL to nullptr. Additionally each function required a small update to reflect the PendingFrame type, but that's pretty minor. There are tests for all the new methods. For more extensive testing, I added the following code to the file gdb/python/lib/command/unwinders.py: from gdb.unwinder import Unwinder class TestUnwinder(Unwinder): def __init__(self): super().__init__("XXX_TestUnwinder_XXX") def __call__(self,pending_frame): lang = pending_frame.language() try: block = pending_frame.block() assert isinstance(block, gdb.Block) except RuntimeError as rte: assert str(rte) == "Cannot locate block for frame." function = pending_frame.function() arch = pending_frame.architecture() assert arch is None or isinstance(arch, gdb.Architecture) name = pending_frame.name() assert name is None or isinstance(name, str) valid = pending_frame.is_valid() pc = pending_frame.pc() sal = pending_frame.find_sal() assert sal is None or isinstance(sal, gdb.Symtab_and_line) return None gdb.unwinder.register_unwinder(None, TestUnwinder()) This registers a global unwinder that calls each of the new PendingFrame methods and checks the result is of an acceptable type. The unwinder never claims any frames though, so shouldn't change how GDB actually behaves. I then ran the testsuite. There was only a single regression, a test that uses 'disable unwinder' and expects a single unwinder to be disabled -- the extra unwinder is now disabled too, which changes the test output. So I'm reasonably confident that the new methods are not going to crash GDB. Reviewed-By: Eli Zaretskii Reviewed-By: Tom Tromey 2023-03-30 Andrew Burgess gdb/python: add PENDING_FRAMEPY_REQUIRE_VALID macro in py-unwind.c This commit copies the pattern that is present in many other py-*.c files: having a single macro to check that the Python object is still valid. This cleans up the code a little throughout the py-unwind.c file. Some of the exception messages will change slightly with this commit, though the type of the exceptions is still ValueError in all cases. I started writing some tests for this change and immediately ran into a problem: GDB would crash. It turns out that the PendingFrame objects are not being marked as invalid! In pyuw_sniffer where the pending frames are created, we make use of a scoped_restore to invalidate the pending frame objects. However, this only restores the pending_frame_object::frame_info field to its previous value -- and it turns out we never actually give this field an initial value, it's left undefined. So, when the scoped_restore (called invalidate_frame) performs its cleanup, it actually restores the frame_info field to an undefined value. If this undefined value is not nullptr then any future accesses to the PendingFrame object result in undefined behaviour and most likely, a crash. As part of this commit I now initialize the frame_info field, which ensures all the new tests now pass. Reviewed-By: Tom Tromey 2023-03-30 Andrew Burgess gdb/python: remove unneeded nullptr check in frapy_block Spotted a redundant nullptr check in python/py-frame.c in the function frapy_block. This was introduced in commit 57126e4a45e3000e when we expanded an earlier check in return early if the pointer in question is nullptr. There should be no user visible changes after this commit. Reviewed-By: Tom Tromey 2023-03-30 Andrew Burgess gdb/python: make the gdb.unwinder.Unwinder class more robust This commit makes a few related changes to the gdb.unwinder.Unwinder class attributes: 1. The 'name' attribute is now a read-only attribute. This prevents user code from changing the name after registering the unwinder. It seems very unlikely that any user is actually trying to do this in the wild, so I'm not very worried that this will upset anyone, 2. We now validate that the name is a string in the Unwinder.__init__ method, and throw an error if this is not the case. Hopefully nobody was doing this in the wild. This should make it easier to ensure the 'info unwinder' command shows sane output (how to display a non-string name for an unwinder?), 3. The 'enabled' attribute is now implemented with a getter and setter. In the setter we ensure that the new value is a boolean, but the real important change is that we call 'gdb.invalidate_cached_frames()'. This means that the backtrace will be updated if a user manually disables an unwinder (rather than calling the 'disable unwinder' command). It is not unreasonable to think that a user might register multiple unwinders (relating to some project) and have one command that disables/enables all the related unwinders. This command might operate by poking the enabled attribute of each unwinder object directly, after this commit, this would now work correctly. There's tests for all the changes, and lots of documentation updates that both cover the new changes, but also further improve (I think) the general documentation for GDB's Unwinder API. Reviewed-By: Eli Zaretskii Reviewed-By: Tom Tromey 2023-03-30 Nick Clifton Fix an illegal memory access when an accessing a zer0-lengthverdef table. PR 30285 * elf.c (_bfd_elf_slurp_version_tables): Fail if no version definitions are allocated. 2023-03-30 Vladimir Mezentsev gprofng: Add version symbols to libgprofng.ver gprofng/ChangeLog 2023-03-29 Vladimir Mezentsev PR gprofng/30089 * libcollector/libgprofng.ver: Add version symbols. * libcollector/synctrace.c: Fix typo for pthread_mutex_lock. 2023-03-30 Alan Modra Setting sh_link for SHT_REL/SHT_RELA It's wrong to have an alloc reloc section trying to use a non-alloc symbol table. * elf.c (assign_section_numbers ): Correct comment. Always set sh_link to .dynsym for alloc reloc sections and to .symtab for non-alloc. 2023-03-30 Alan Modra Fix memory leak in bfd_get_debug_link_info_1 * opncls.c (bfd_get_alt_debug_link_info): Don't bother freeing after bfd_malloc_and_get_section failure. (get_build_id): Likewise. (bfd_get_debug_link_info_1): Likewise. Free section contents when crc not present. * section.c (bfd_malloc_and_get_section): Document that the buffer is NULL on error return. Tidy leaked objcopy memory * objcopy.c (delete_symbol_htabs): Also free symbols. (write_debugging_info): Free strings and syms once written. * wrstabs.c (write_stabs_in_sections_debugging_info): memset entire info struct. Free hash tables before returning. Free syms on error return. Tidy memory on addr2line failures * addr2line.c (process_file): Close bfd on error paths. 2023-03-30 Roland McGrath Fix typo in ld manual --enable-non-contiguous-regions example 2023-03-30 GDB Administrator Automatic date update in version.in 2023-03-30 Palmer Dabbelt RISC-V: PR28789, Reject R_RISCV_PCREL relocations with ABS symbol in PIC/PIE. The non-preemptible SHN_ABS symbol with a pc-relative relocation should be disallowed when generating shared object (pic and pie). Generally, the following cases, which refer to pr25749, will cause a symbol be non-preemptible, * -pie, or -shared with -symbolic * STV_HIDDEN, STV_INTERNAL, STV_PROTECTED * Have dynamic symbol table, but without the symbol * VER_NDX_LOCAL However, PCREL_HI20/LO12 relocs are always bind locally when generating shared object, so not only the non-preemptible absolute symbol need to be disallowed, all absolute symbol references need but except that they are defined in linker script. If we also disallow the absolute symbol in linker script, then the glibc-linux toolchain build failed, so regard them as pc-relative symbols, just like what x86 did. Maybe we should add this check for all pc-relative relocations, rather than just handle in R_RISCV_PCREL relocs. Ideally, since the value of SHN_ABS symbol is a constant, only S - A relocations should be allowed in the shared object, so only BFD_RELOC_8/16/32/64 are allowed, which means R_RISCV_32/R_RISCV_64. bfd/ PR 28789 * elfnn-riscv.c (riscv_elf_check_relocs): The absolute symbol cannot be referneced with pc-relative relocation when generating shared object. ld/ PR 28789 * ld/testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated. * ld/testsuite/ld-riscv-elf/pcrel-reloc*: New testcases. 2023-03-30 Nelson Chu RISC-V: Clarify link behaviors of R_RISCV_32/64 relocations with ABS symbol. There are two improvements, which are all referenced to aarch64, * R_RISCV_32 with non ABS symbol cannot be used under RV64 when making shard objects. * Don't need dynamic relocation for R_RISCV_32/64 under RV32/RV64 when making shared objects, if the referenced symbol is local ABS symbol. However, considering this link, https://github.com/riscv-non-isa/riscv-elf-psabi-doc/issues/341 Seems like we should makes all R_RISCV_32/64 relocs with ABS symbol that don't need any dynamic relocations when making the shared objects. But anyway, I just sync the current behavior as aarch64 ld, in case there are any unexpected behaviors happen. Passed the gcc/binutils regressions in riscv-gnu-toolchain. bfd/ * elfnn-riscv.c (riscv_elf_check_relocs): Only allow R_RISCV_32 with ABS symbol under RV64. (riscv_elf_relocate_section): R_RISCV_32/64 with local ABS symbol under RV32/RV64 doesn't need any dynamic relocation when making shared objects. I just make the implementations similar to other targets, so that will be more easy to mainatain. ld/ * testsuite/ld-riscv-elf/data-reloc*: New testcases. * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Added new data-reloc* testcases, and need to make ifunc-seperate* testcases work for rv32. * testsuite/ld-riscv-elf/ifunc-seperate-caller-nonplt.s: Likewise. * testsuite/ld-riscv-elf/ifunc-seperate-caller-plt.s: Likewise. 2023-03-30 Nelson Chu RISC-V: Extract the ld code which are too complicated, and may be reused. These types of codes are different for each target, I am not sure what are the best for RISC-V, so extract them out may be more easy to compare what's the difference. bfd/ * elfnn-riscv.c (RISCV_NEED_DYNAMIC_RELOC): New defined. Extracted from riscv_elf_check_relocs, to see if dynamic reloc is needed for the specific relocation. (RISCV_GENERATE_DYNAMIC_RELOC): New defined. Extracted from riscv_elf_relocate_section, to see if R_RISCV_32/64 need to generate dynamic relocation. (RISCV_COPY_INPUT_RELOC): New defined. Extracted from riscv_elf_relocate_section, to see if R_RISCV_32/64 need to copy itslef tp output file. (RISCV_RESOLVED_LOCALLY): New defined. Extracted from riscv_elf_relocate_section, to see if R_RISCV_GOT_HI20 can be resolved locally. 2023-03-29 Tom Tromey Use the correct frame when evaluating a dynamic property The test case in this patch shows an unusual situation: an Ada array has a dynamic bound, but the bound comes from a frame that's referred to by the static link. This frame is correctly found when evaluating the array variable itself, but is lost when evaluating the array's bounds. This patch fixes the problem by passing this frame through to value_at_lazy in the DWARF expression evaluator. 2023-03-29 Tom Tromey Pass a frame to value_at_lazy and value_from_contents_and_address This patch adds a 'frame' parameter to value_at_lazy and ensures that it is passed down to the call to resolve_dynamic_type. This required also adding a frame parameter to value_from_contents_and_address. Nothing passes this parameter to value_at_lazy yet, so this patch should have no visible effect. 2023-03-29 Tom Tromey Add frame parameter to resolve_dynamic_type This adds a frame parameter to resolve_dynamic_type and arranges for it to be passed through the call tree and, in particular, to all calls to dwarf2_evaluate_property. Nothing passes this parameter yet, so this patch should have no visible effect. A 'const frame_info_ptr *' is used here to avoid including frame.h from gdbtypes.h. 2023-03-29 Tom Tromey Remove version_at_least version_at_least is a less capable variant of version_compare, so this patch removes it. Rewrite version_compare and rust_at_least This rewrites version_compare to allow the input lists to have different lengths, then rewrites rust_at_least to use version_compare. Introduce rust_at_least helper proc This adds a 'rust_at_least' helper proc, for checking the version of the Rust compiler in use. It then changes various tests to use this with 'require'. 2023-03-29 Tom de Vries [gdb/testsuite] Require gnatmake 11 for gdb.ada/verylong.exp With test-case gdb.ada/verylong.exp and gnatmake 7.5.0 I run into: ... compilation failed: gcc ... $src/gdb/testsuite/gdb.ada/verylong/prog.adb prog.adb:16:11: warning: file name does not match unit name, should be "main.adb" prog.adb:17:08: "Long_Long_Long_Integer" is undefined (more references follow) gnatmake: "prog.adb" compilation error FAIL: gdb.ada/verylong.exp: compilation prog.adb ... AFAICT, support for Long_Long_Long_Integer was added in gcc 11. Fix this by requiring gnatmake version 11 or higher in the test-case. Tested on x86_64-linux. 2023-03-29 Nils-Christian Kempke doc: fix informations typo in gdb.texinfo Co-Authored-By: Christina Schimpe 2023-03-29 Nils-Christian Kempke gdb, infcmd: remove redundant ERROR_NO_INFERIOR in continue_command The ERROR_NO_INFERIOR macro is already called at the beginning of the function continue_command. Since target/inferior are not switched in-between, the second call to it is redundant. Co-Authored-By: Christina Schimpe 2023-03-29 Andrew Burgess gdb: move displaced_step_dump_bytes into gdbsupport (and rename) It was pointed out during review of another patch that the function displaced_step_dump_bytes really isn't specific to displaced stepping, and should really get a more generic name and move into gdbsupport/. This commit does just that. The function is renamed to bytes_to_string and is moved into gdbsupport/common-utils.{cc,h}. The function implementation doesn't really change. Much... ... I have updated the function to take an array view, which makes it slightly easier to call in a couple of places where we already have a gdb::bytes_vector. I've then added an inline wrapper to convert a raw pointer and length into an array view, which is used in places where we don't easily have a gdb::bytes_vector (or similar). Updated all users of displaced_step_dump_bytes. There should be no user visible changes after this commit. Finally, I ended up having to add an include of gdb_assert.h into array-view.h. When I include array-view.h into common-utils.h I ran into build problems because array-view.h calls gdb_assert. Approved-By: Simon Marchi 2023-03-29 Andrew Burgess gdb: more debug output for displaced stepping While investigating a displaced stepping issue I wanted an easy way to see what GDB thought the original instruction was, and what instruction GDB replaced that with when performing the displaced step. We do print out the address that is being stepped, so I can track down the original instruction, I just need to go find the information myself. And we do print out the bytes of the new instruction, so I can figure out what the replacement instruction was, but it's not really easy. Also, the code that prints the bytes of the replacement instruction only prints 4 bytes, which clearly isn't always going to be correct. In this commit I remove the existing code that prints the bytes of the replacement instruction, and add two new blocks of code to displaced_step_prepare_throw. This new code prints the original instruction, and the replacement instruction. In each case we print both the bytes that make up the instruction and the completely disassembled instruction. Here's an example of what the output looks like on x86-64 (this is with 'set debug displaced on'). The two interesting lines contain the strings 'original insn' and 'replacement insn': (gdb) step [displaced] displaced_step_prepare_throw: displaced-stepping 2892655.2892655.0 now [displaced] displaced_step_prepare_throw: original insn 0x401030: ff 25 e2 2f 00 00 jmp *0x2fe2(%rip) # 0x404018 [displaced] prepare: selected buffer at 0x401052 [displaced] prepare: saved 0x401052: 1e fa 31 ed 49 89 d1 5e 48 89 e2 48 83 e4 f0 50 [displaced] fixup_riprel: %rip-relative addressing used. [displaced] fixup_riprel: using temp reg 2, old value 0x7ffff7f8a578, new value 0x401036 [displaced] amd64_displaced_step_copy_insn: copy 0x401030->0x401052: ff a1 e2 2f 00 00 68 00 00 00 00 e9 e0 ff ff ff [displaced] displaced_step_prepare_throw: prepared successfully thread=2892655.2892655.0, original_pc=0x401030, displaced_pc=0x401052 [displaced] displaced_step_prepare_throw: replacement insn 0x401052: ff a1 e2 2f 00 00 jmp *0x2fe2(%rcx) [displaced] finish: restored 2892655.2892655.0 0x401052 [displaced] amd64_displaced_step_fixup: fixup (0x401030, 0x401052), insn = 0xff 0xa1 ... [displaced] amd64_displaced_step_fixup: restoring reg 2 to 0x7ffff7f8a578 0x00007ffff7e402c0 in puts () from /lib64/libc.so.6 (gdb) One final note. For many targets that support displaced stepping (in fact all targets except ARM) the replacement instruction is always a single instruction. But on ARM the replacement could actually be a series of instructions. The debug code tries to handle this by disassembling the entire displaced stepping buffer. Obviously this might actually print more than is necessary, but there's (currently) no easy way to know how many instructions to disassemble; that knowledge is all locked in the architecture specific code. Still I don't think it really hurts, if someone is looking at this debug then hopefully they known what to expect. Obviously we can imagine schemes where the architecture specific displaced stepping code could communicate back how many bytes its replacement sequence was, and then our debug print code could use this to limit the disassembly. But this seems like a lot of effort just to save printing a few additional instructions in some debug output. I'm not proposing to do anything about this issue for now. Approved-By: Simon Marchi 2023-03-29 Tom de Vries [gdb/testsuite] Fix gdb.guile/scm-symbol.exp for remote host Fix test-case gdb.guile/scm-symbol.exp for remote host by making a regexp less strict. Likewise in gdb.guile/scm-symtab.exp. Tested on x86_64-linux. 2023-03-29 Tom de Vries [gdb/testsuite] Fix /gdb.guile/scm-parameter.exp for remote host Fix test-case gdb.guile/scm-parameter.exp for remote host by taking into account that gdb_reinitialize_dir has no effect for remote host. Tested on x86_64-linux. 2023-03-29 Tom de Vries [gdb/testsuite] Fix gdb.guile/scm-objfile-script.exp for remote host Fix test-case gdb.guile/scm-objfile-script.exp using gdb_remote_download. Tested on x86_64-linux. 2023-03-29 Tom de Vries [gdb/testsuite] Fix gdb.guile/scm-objfile-script.exp for remote host Fix test-case gdb.guile/scm-objfile-script.exp using host_standard_output_file. Tested on x86_64-linux. 2023-03-29 Tom de Vries [gdb/testsuite] Fix gdb.guile/scm-cmd.exp without readline Fix test-case gdb.guile/scm-cmd.exp using readline_is_used. Tested on x86_64-linux. 2023-03-29 Tom de Vries [gdb/testsuite] Fix gdb.guile/guile.exp for remote host Fix test-case gdb.guile/guile.exp for remote host using gdb_remote_download. Tested on x86_64-linux. 2023-03-29 Alan Modra Sanity check section size in bfd_init_section_compress_status This function doesn't just initialise for compression, it actually compresses. This patch sanity checks section size before allocating buffers for the uncompressed contents. * compress.c (bfd_init_section_compress_status): Sanity check section size. 2023-03-29 Alan Modra Re: Fix an aout memory leak We have way too much duplicated code in bfd. Apply dd3a3d0af9f6 and 920581c57e08 to pdp11.c. * pdp11.c (bfd_free_cached_info): Free line_buf. Return true if tdata.aout_data is NULL. 2023-03-29 Alan Modra ld testsuite CFLAGS_FOR_TARGET run_host_cmd adds $gcc_B_opt and $ld_L_opt to the command line if it detects the program being run is a compiler. Since the program being run in lto.exp linking pr28138 is "sh", we need to add these by hand. This isn't exactly as run_host_cmd does, as it lacks reordering of any user -B option in $CC_FOR_TARGET, but it's better than ignoring gcc_B_opt. This fixes a mips64 testsuite fail. ld_compile adds CFLAGS_FOR_TARGET and other flags as well, so there is no need for the ld_compile command line to include CFLAGS_FOR_TARGET. Fixing this is just a tidy. * testsuite/ld-plugin/lto.exp: Add gcc_B_opt, CFLAGS_FOR_TARGET and $ld_L_opt to pr28138 link line. * testsuite/lib/ld-lib.exp (run_ld_link_tests): Don't pass unnecessary flags to ld_compile. (run_ld_link_exec_tests, run_cc_link_tests): Likewise. 2023-03-29 GDB Administrator Automatic date update in version.in 2023-03-28 Tom Tromey Rename "raw" to "unrelocated" Per an earlier discussion, this patch renames the existing "raw" APIs to use the word "unrelocated" instead. Use unrelocated_addr in minimal symbols This changes minimal symbols to use unrelocated_addr. I believe this detected a latent bug in add_pe_forwarded_sym. Use unrelocated_addr in psymbols This changes psymbols themselves to use unrelocated_addr. This transform is largely mechanical. I don't think it finds any bugs. Use unrelocated_addr in partial symbol tables This changes partial symbol tables to use unrelocated_addr for the text_high and text_low members. This revealed some latent bugs in ctfread.c, which are fixed here. Move definition of unrelocated_addr earlier This moves the definition of unrelocated_addr a bit earlier in symtab.h, so that it can be used elsewhere in the file. Use function_view in gdb_bfd_lookup_symbol This changes gdb_bfd_lookup_symbol to use a function_view. This simplifies the code a little bit. 2023-03-28 Tom de Vries [gdb/testsuite] Fix gdb.btrace/multi-inferior.exp for remote host Fix test-case gdb.btrace/multi-inferior.exp for remote host using gdb_remote_download. Tested on x86_64-linux. 2023-03-28 Tom de Vries [gdb/testsuite] Fix gdb.btrace/gcore.exp for remote host Fix test-case gdb.btrace/gcore.exp for remote host using host_standard_output. Tested on x86_64-linux. 2023-03-28 Tom de Vries [gdb/testsuite] Fix gdb.btrace/reconnect.exp for remote target Fix test-case gdb.btrace/reconnect.exp for target board remote-gdbserver-on-localhost using gdb_remote_download. Tested on x86_64-linux. 2023-03-28 Tom Tromey Put pretty-printers to_string output in varobj result PR mi/11335 points out that an MI varobj will not display the result of a pretty-printer's "to_string" method. Instead, it always shows "{...}". This does not seem very useful, and there have been multiple complaints about it over the years. This patch changes varobj to emit this string when possible, and updates the test suite. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=11335 2023-03-28 Simon Marchi gdb/testsuite: allow "require" callbacks to provide a reason When an allow_* proc returns false, it can be a bit difficult what check failed exactly, if the procedure does multiple checks. To make investigation easier, I propose to allow the "require" callbacks to be able to return a list of two elements: the zero/non-zero value, and a reason string. Use the new feature in allow_hipcc_tests to demonstrate it (it's also where I hit actually hit this inconvenience). On my computer (where GDB is built with amd-dbgapi support but where I don't have a suitable GPU target), I get: UNSUPPORTED: gdb.rocm/simple.exp: require failed: allow_hipcc_tests (no suitable amdgpu targets found) vs before: UNSUPPORTED: gdb.rocm/simple.exp: require failed: allow_hipcc_tests Change-Id: Id1966535b87acfcbe9eac99f49dc1196398c6578 Approved-By: Tom de Vries 2023-03-28 Tom de Vries [gdb/testsuite] Fix gdb.server/server-kill-python.exp for remote host Fix test-case gdb.server/server-kill-python.exp for remote host using gdb_remote_download. Tested on x86_64-linux. 2023-03-28 Tom de Vries [gdb/testsuite] Fix gdb.server/sysroot.exp for remote host Fix test-case gdb.server/sysroot.exp for remote host, by: - using gdb_remote_download, and - disabling the "local" scenario for remote host/target, unless remote host == remote target. Tested on x86_64-linux. 2023-03-28 Tom de Vries [gdb/testsuite] Require non-remote host for gdb.server/multi-ui-errors.exp Require non-remote host for test-case gdb.server/multi-ui-errors.exp, because it uses "spawn -pty", which creates a pty on build, which gdb cannot use on remote host. Tested on x86_64-linux. 2023-03-28 Tom de Vries [gdb/testsuite] Fix gdb.server/solib-list.exp for remote host Fix test-case gdb.server/solib-list.exp for remote host using gdb_remote_download. Likewise in another test-case. Tested on x86_64-linux. 2023-03-28 Tom de Vries [gdb/testsuite] Fix gdb.server/file-transfer.exp for remote host Fix test-case gdb.server/file-transfer.exp for remote host using gdb_remote_download and host_standard_output_file. Tested on x86_64-linux. 2023-03-28 Tom de Vries [gdb/testsuite] Fix local-remote-host-native.exp for gdb.server tests When running test-case gdb.server/stop-reply-no-thread-multi.exp with host+target board local-remote-host-native, I run into a time-out: ... (gdb) PASS: gdb.server/stop-reply-no-thread-multi.exp: target-non-stop=off: \ to_disable=: disconnect builtin_spawn /usr/bin/ssh -t -l vries 127.0.0.1 gdbserver --once \ localhost:2346 stop-reply-no-thread-multi^M Process stop-reply-no-thread-multi created; pid = 32600^M Listening on port 2346^M set remote threads-packet off^M FAIL: gdb.server/stop-reply-no-thread-multi.exp: target-non-stop=off: \ to_disable=: set remote threads-packet off (timeout) ... This is due to this line in ${board}_spawn: ... set board_info($board,fileid) $spawn_id ... We have the following series of events: - gdb is spawned, setting fileid - a few gdb commands (set height etc) are send using fileid, arrive at gdb and are successful - gdbserver is spawned, overwriting fileid - the next gdb command is sent using fileid, so it's send to gdbserver instead of gdb, and we run into the timeout. There is some notion of current gdb, tracked in both gdb_spawn_id and fileid of the host board (see switch_gdb_spawn_id). And because the host and target board are the same, spawning something on the target overwrites the fileid on host, and consequently the current gdb. Fix this by only setting fileid when spawning gdb. Tested on x86_64-linux. Now gdb.server/*.exp passes for host+target board local-remote-host-native, except for file-transfer.exp. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29734 2023-03-28 Enze Li gdb: use dynamic year in update-freebsd.sh When running update-freebsd.sh on FreeBSD, I see the following modification in freebsd.xml, - So I looked at the strace sources, to confirm that clone3 is in fact recorded in the "process" group there too, and to check what other syscalls might be missing groups. After some digging, I found that strace records the group info in C arrays, with entries like: ... [ 61] = { 4, TP, SEN(wait4), "wait4" }, [ 62] = { 2, TS|TP, SEN(kill), "kill" }, [ 63] = { 1, 0, SEN(uname), "uname" }, ... You can see the current master's table for Linux x86-64 here: https://github.com/strace/strace/blob/e88e5e9ae6da68f22d15f9be3193b1412ac9aa02/src/linux/x86_64/syscallent.h The column with TS|TP above is what defines each syscall's groups. So I wrote a script that extracts this information and generates linux-defaults.xml.in. Approved-By: Simon Marchi Change-Id: I679d59d42fb2a914bf7a99e4c558e9696e5adff1 2023-02-27 Clément Chigot gas/testsuite: adjust another test for case insensitive file systems As 1fafeaac8503eea2f61c3a35f0eef183b7e7cc65, "line.s" and "Line.s" are identical in case insensitive file systems. Thus, gas doesn't trigger an input file switch. gas/ChangeLog: * testsuite/gas/elf/dwarf-5-macro.s: Change Line.s to Line2.s. 2023-02-27 Andrew Burgess gdb: don't treat empty enums as flag enums In C++ it is possible to use an empty enum as a strong typedef. For example, a user could write: enum class my_type : unsigned char {}; Now my_type can be used like 'unsigned char' except the compiler will not allow implicit conversion too and from the native 'unsigned char' type. This is used in the standard library for things like std::byte. Currently, when GDB prints a value of type my_type, it looks like this: (gdb) print my_var $1 = (unknown: 0x4) Which isn't great. This gets worse when we consider something like: std::vector vec; When using a pretty-printer, this could look like this: std::vector of length 2, capacity 2 = {(unknown: 0x2), (unknown: 0x4)} Clearly not great. This is described in PR gdb/30148. The problem here is in dwarf2/read.c, we assume all enums are flag enums unless we find an enumerator with a non-flag like value. Clearly an empty enum contains no non-flag values, so we assume the enum is a flag enum. I propose adding an extra check here; that is, an empty enum should never be a flag enum. With this the above cases look more like: (gdb) print my_var $1 = 4 and: std::vector of length 2, capacity 2 = {2, 4} Which look much better. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30148 Reviewed-By: Tom Tromey 2023-02-27 Benson Muite Do not change the timestamp when updating the gas asconfig file. PR 28909 * doc/local.mk (asconfig.texi): Use "cp -p" to preserve timestamps. * Makefile.in: Regenerate. 2023-02-27 Felix Willgerodt Fix missing "Core was generated by" when loading a x32 corefile. 2023-02-27 Nick Clifton Updated Serbian translations for gold, gprof and opcodes sub-directories 2023-02-27 Bruno Larsen gdb/testsuite: Improve testing of GDB's completion functions When looking at some failures of gdb.linespec/cp-completion-aliases.exp, I noticed that when a completion test will fail, it always fails with a timeout. This is because most completion tests use gdb_test_multiple and only add a check for the correct output. This commit adds new options for both, tab and command completion. For command completion, the new option will check if the prompt was printed, and fail in this case. This is enough to know that the test has failed because the check comes after the PASS path. For tab completion, we have to check if GDB outputted more than just the input line, because sometimes GDB would have printed a partial line before finishing with the correct completion. Approved-By: Tom Tromey 2023-02-27 Tankut Baris Aktemur gdb, python: do minor modernization in execute_gdb_command Use nullptr instead of NULL and boolify two local variables in execute_gdb_command. Approved-By: Tom Tromey 2023-02-27 GDB Administrator Automatic date update in version.in 2023-02-26 Tom Tromey Remove expand_symtab_containing_pc The function expand_symtab_containing_pc is unused; remove it. Tested by rebuilding. 2023-02-26 GDB Administrator Automatic date update in version.in 2023-02-25 Andrew Burgess gdb/amd64: replace xmalloc/alloca with gdb::byte_vector Replace a couple of uses of xmalloc and alloc with a gdb::byte_vector local variable instead. There should be no user visible changes after this commit. Reviewed-By: Tom Tromey 2023-02-25 Andrew Burgess opcodes/m68k: enable libopcodes styling for GDB The following commit added libopcodes styling for m68k: commit c22ff449275c91e4842bb10c650e83c572580f65 Date: Tue Feb 14 18:07:19 2023 +0100 opcodes: style m68k disassembler output but didn't set disassemble_info::created_styled_output in disassemble.c, which is needed in order for GDB to start using the libopcodes based styling. This commit fixes this small oversight. GDB now styles correctly. 2023-02-25 GDB Administrator Automatic date update in version.in 2023-02-24 Khem Raj gdbserver/linux-low.cc: Fix a typo in ternary operator 2023-02-24 Tom Tromey Remove struct buffer I've long wanted to remove 'struct buffer', and thanks to Simon's earlier patch, I was finally able to do so. My feeling has been that gdb already has several decent structures available for growing strings: std::string of course, but also obstack and even objalloc from BFD and dyn-string from libiberty. The previous patches in this series removed all the uses of struct buffer, so this one can remove the code and the remaining #includes. Don't use struct buffer in top.c This changes top.c to use std::string rather than struct buffer. Like the event-top.c change, this is not completely ideal in that it requires a copy of the string. Don't use struct buffer in event-top.c This changes event-top.c to use std::string rather than struct buffer. This isn't completely ideal, in that it requires a copy of the string to be made. Don't use struct buffer in handle_qxfer_threads This changes handle_qxfer_threads, in gdbserver, to use std::string rather than struct buffer. Don't use struct buffer in handle_qxfer_btrace This changes handle_qxfer_btrace and handle_qxfer_btrace_conf, in gdbserver, to use std::string rather than struct buffer. Don't use struct buffer in handle_qxfer_traceframe_info This changes handle_qxfer_traceframe_info, in gdbserver, to use std::string rather than struct buffer. Remove struct buffer from tracefile-tfile.c This changes tracefile-tfile.c to use std::string rather than struct buffer. 2023-02-24 Tom Tromey Write the DWARF index in the background The new DWARF cooked indexer interacts poorly with the DWARF index cache. In particular, the cache will require gdb to wait for the cooked index to be finalized. As this happens in the foreground, it means that users with this setting enabled will see a slowdown. This patch changes gdb to write the cache entry a worker thread. (As usual, in the absence of threads, this work is simply done immediately in the main thread.) Some care is taken to ensure that this can't crash, and that gdb will not exit before the task is complete. To avoid use-after-free problems, the DWARF per-BFD object explicitly waits for the index cache task to complete. To avoid gdb exiting early, an exit observer is used to wait for all such pending tasks. In normal use, neither of these waits will be very visible. For users using "-batch" to pre-generate the index, though, it would be. However I don't think there is much to be done about this, as it was the status quo ante. 2023-02-24 Tom Tromey Only use the per-BFD object to write a DWARF index The DWARF index does not need access to the objfile or per-objfile objects when writing -- it's entirely based on the objfile-independent per-BFD data. This patch implements this idea by changing the entire API to only be passed the per-BFD object. This simplifies some lifetime reasoning for the next patch. This patch removes some code that ensures that the BFD came from a file. It seems to me that checking for the existence of a build-id is good enough for the index cache. 2023-02-24 Simon Marchi gdb: fix parenthesis position in comment Change-Id: I535b597ab4482378910570d8dd69c090419941eb 2023-02-24 Clément Chigot testsuite: prune DOS drive letter in test outputs On DOS systems, absolute paths start with the drive letter. This can trigger failures in the regexp from dump tests, especially for those checking for warnings or errors. They are usually skipping everything before the first ":" as it has to be the file path. | [^:]*: warning: ... In order to avoid modifying many regexps to allow such drive letters, prune them from all the outputs if they are found at the beginning of a line. binutils/ChangeLog: * testsuite/lib/binutils-common.exp (prune_dump_output): New (run_dump_test): Use it. ld/ChangeLog: * testsuite/ld-elf/noinit-sections-2.l: Remove DOS drive letter handler. 2023-02-24 Jan Beulich x86: allow to request ModR/M encoding Several insns have a (typically shorter) non-ModR/M and a (typically longer) ModR/M encoding. In most cases the former is used by default. This isn't too dissimilar from register-only insns sometimes having two encoding forms. In those cases {load} or {store} can be used to control the encoding used. Extend this to ModR/M-less encodings which have a ModR/M counterpart (note that BSWAP hasn't). For insn reading and writing their (explicit) memory operand, both prefixes are honored; otherwise only the applicable one is. Note that for some forms of XCHG, {store} has already been performing this function, apparently as an unnoticed side effect of adding D to the template. 2023-02-24 Jan Beulich x86: MONITOR/MWAIT are not SSE3 insns These have their own CPUID bit and hence they should also have their own separate control. 2023-02-24 Jan Beulich x86-64: don't permit LAHF/SAHF with "generic64" The feature isn't universally available on 64-bit CPUs. Note that in i386-gen.c:isa_dependencies[] I'm only adding it to models where I'm certain the functionality exists. For Nocona and Core I'm uncertain in particular. 2023-02-24 Jan Beulich x86: have insns acting on segment selector values allow for consistent operands While MOV to/from segment register as well as selector storing insns already permit 32- and 64-bit GPR operands, selector loading insns and ARPL do not. Split templates accordingly. 2023-02-24 Jan Beulich x86: restrict insn templates accepting negative 8-bit immediates For shifts (but not ordinary rotates) and other cases where an immediate describes e.g. a bit count or position, allowing negative operands is at best confusing. An extreme example would be the two rotate-through-carry insns, where a negative value would _not_ mean rotating the corresponding number of bits in the other direction. To refuse such, give meaning to the combination of Imm8 and Imm8S in templates (so far these weren't used together anywhere). The issue was with smallest_imm_type() blindly setting .imm8 for signed numbers determined to fit in a byte. VPROT{B,W,D,Q} is a little special: The rotate count there is a signed quantity, so Imm8 is replaced by Imm8S. Adjust affected testcases accordingly as well. Another small adjustment to the testsuite is necessary: AAM and AAD were never sensible to use with 0xffffff90 operands. This should have been an error. 2023-02-24 Tom de Vries [gdb/testsuite] Cleanup unnecessary expr from require line In a recent commit I've added: ... require {expr [have_compile_flag -fsplit-stack]} ... but actually the expr bit is unnecessary, and we can just use: ... require {have_compile_flag -fsplit-stack} ... Reported-By: Tom Tromey 2023-02-24 Maciej W. Rozycki GDB: Fix out of bounds accesses with limited-length values Fix accesses to limited-length values in `contents_copy_raw' and `contents_copy_raw_bitwise' so that they observe the limit of the original allocation. Reported by Simon Marchi as a heap-buffer-overflow AddressSanitizer issue triggered with gdb.ada/limited-length.exp. Approved-By: Simon Marchi 2023-02-24 Nick Clifton Enhance better_fit() function to prefer function symbols over non-function symbols. 2023-02-24 Alan Modra PR30155, ld segfault in _bfd_nearby_section The segfault was a symptom of messing with the absolute section next field, confusing bfd_section_removed_from_list in linker.c:fix_syms. That's not all that was going wrong. The INSERT list of output sections was being inserted into itself, ie. lost from the main list of linker statements. PR 30155 * ldlang.c (process_insert_statements): Handle pathological case of the insert script being inserted before the first output section statement in the default script. (output_prev_sec_find): Don't test section owner here. (insert_os_after): Change parameter to a list union pointer. (lang_insert_orphan): Test section owner here and adjust insert_os_after call. 2023-02-24 Fangrui Song RISC-V: Add --[no-]relax-gp to ld --relax enables all relaxations. --no-relax-gp disables GP relaxation to allow measuring its effect. The option can test effectiveness of GP relaxation and support some ABI variants that use GP for other purposes. Link: https://github.com/riscv-non-isa/riscv-elf-psabi-doc/issues/298 bfd/ * elfnn-riscv.c (struct riscv_elf_link_hash_table): Add params. (riscv_elfNN_set_options): New. (riscv_info_to_howto_rela): Check relax_gp. (_bfd_riscv_relax_section): Likewise. * elfxx-riscv.h (struct riscv_elf_params): New. (riscv_elf32_set_options): New. (riscv_elf64_set_options): New. ld/ * emultempl/riscvelf.em: Add option parsing. * testsuite/ld-riscv-elf/code-model-relax-medlow-01-norelaxgp.d: New. * testsuite/ld-riscv-elf/pcgp-relax-01-norelaxgp.d: New. * testsuite/ld-riscv-elf/pcgp-relax-02.d: Test --relax --relax-gp can be used together. 2023-02-24 GDB Administrator Automatic date update in version.in 2023-02-23 Palmer Dabbelt gdb/doc: The RISC-V vector registers didn't change When we merged the GDB vector register support we did it a bit early, just eating the risk in the very unlikely case that the vector register names changed. They didn't, so we can now remove the caveat in the docs that they might. 2023-02-23 Simon Marchi gdb: remove --disable-gdbmi configure option I noticed that the --disable-gdbmi option was broken for almost a year (since 740b42ceb7c "gdb/python/mi: create MI commands using python"). The problem today is the python/py-cmd.c file. It is included in the build if Python support is enabled, and it calls into some MI functions (e.g. insert_mi_cmd_entry). If MI support is disabled, we get some undefined symbols like: mold: error: undefined symbol: insert_mi_cmd_entry(std::unique_ptr >) >>> referenced by py-micmd.c >>> python/py-micmd.o:(micmdpy_install_command(micmdpy_object*)) The python/py-cmd.c file should be included in the build if both Python and MI support are enabled. It is not a case we support today, but it could be done with a bit more configure code. However, I think we should just remove the --disable-gdbmi option, and just include MI support unconditionally. Tom Tromey proposed a while ago to remove this option, but it ended staying: https://inbox.sourceware.org/gdb-patches/20180628172132.28843-1-tom@tromey.com/ However, there was no strong opposition to remove it. The argument was just "bah, it doesn't hurt anybody". But given today's case, I would rather remove complexity rather than add some. I couldn't find anybody caring deeply for that option, and it's not like MI adds any external dependency. It's just a bit more code. Removing the option will not break anybody using --disable-gdbmi (it can be found in many build scripts [1]), since we don't flag invalid configure flags. So, remove the option from configure.ac, and adjust Makefile.in accordingly to always include the MI objects in the build. [1] https://github.com/search?q=%22--disable-gdbmi%22&type=code Change-Id: Ifcaa8c9fc4abc6fa686ed5fd984598644f745240 Approved-By: Tom Tromey 2023-02-23 Tom Tromey Fix Tcl quoting in gdb_assert The gdb_assert proc under-quotes the expression that is passed in. This leads to weird code in a couple of spots that tries to compensate: gdb_assert {{$all_regs eq $completed_regs}} ... The fix is to add a bit of quoting when evaluating the expression. 2023-02-23 Nick Clifton Fix _bfd_elf_find_function so that it can cope with overlapping symbols 2023-02-23 Simon Marchi gdb: add AMDGPU header files to HFILES_NO_SRCDIR Commit 18b4d0736bc5 ("gdb: initial support for ROCm platform (AMDGPU) debugging") missed adding these header files to the HFILES_NO_SRCDIR list in the Makefile. Fix that now. Change-Id: Ifd387096aef3d147b51aefa2037da5bf6373ea64 2023-02-23 Tom Tromey Remove 'eval' from gdb_breakpoint Now that Tcl has the {*} operator, we can remove the use of eval from gdb_breakpoint. Tested on x86-64 Fedora 36. 2023-02-23 Hui Li gdb: LoongArch: Support reg aliases in info reg command According to LoongArch ELF ABI specification [1], support the register aliases in "info register" command. Without this patch: ``` (gdb) info reg a0 Invalid register `a0' ``` With this patch: ``` (gdb) info reg a0 a0 0x1 1 ``` [1] https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html#_register_convention 2023-02-23 Hui Li gdb: LoongArch: Modify the result of the info reg command The "info register" command should only display general registers, but it shows the information of all registers in the current code, add loongarch_register_reggroup_p() so that we can get the expected result. 2023-02-23 Alexey Lapshin bfd: xtensa: fix __stop_SECTION literal drop 2023-02-23 Nick Clifton Fix the BFD library's find_nearest_line feature to produce consistent results. PR 30150 * dwarf2.c (comp_unit_contains_address): Renamed to ... (comp_unit_may_contain_address): this, and added code to return true if the CU's ranges have not yet been computed. (_bfd_dwarf2_find_nearest_line_with_alt): Use the renamed function, simplifying code in the process. 2023-02-23 Alan Modra dwarf1 .line SEC_HAS_CONTENTS * dwarf1.c (parse_line_table): Ignore .line without SEC_HAS_CONTENTS. Formatting. 2023-02-23 Alan Modra ip2k: don't look at stab sections without relocs No need to read contents if we won't do anything. * elf32-ip2k.c (adjust_all_relocations): Skip stab sections without relocs. 2023-02-23 Alan Modra Test SEC_HAS_CONTENTS in relax routines More places that generally expect instructions, so not zeros. * coff-sh.c (sh_relax_section, sh_relax_delete_bytes): Exclude sections without SEC_HAS_CONTENTS set. * elf-m10200.c (mn10200_elf_relax_section): Likewise. * elf32-arc.c (arc_elf_relax_section): Likewise. * elf32-avr.c (elf32_avr_relax_section): Likewise. * elf32-cr16.c (elf32_cr16_relax_section): Likewise. * elf32-crx.c (elf32_crx_relax_section): Likewise. * elf32-epiphany.c (epiphany_elf_relax_section): Likewise. * elf32-ft32.c (ft32_elf_relax_section): Likewise. * elf32-h8300.c (elf32_h8_relax_section): Likewise. * elf32-ip2k.c (ip2k_elf_relax_section): Likewise. * elf32-m32c.c (m32c_elf_relax_section): Likewise. * elf32-m68hc11.c (m68hc11_elf_relax_section): Likewise. * elf32-msp430.c (msp430_elf_relax_section): Likewise. * elf32-pru.c (pru_elf32_relax_section): Likewise. * elf32-rl78.c (rl78_elf_relax_section): Likewise. * elf32-rx.c (elf32_rx_relax_section): Likewise. * elf32-sh.c (sh_elf_relax_section): Likewise. (sh_elf_relax_delete_bytes): Likewise. * elf32-v850.c (v850_elf_relax_section): Likewise. * elf64-alpha.c (elf64_alpha_relax_section): Likewise. * elf64-ia64-vms.c (elf64_ia64_relax_section): Likewise. * elfnn-ia64.c (elfNN_ia64_relax_section): Likewise. * elfnn-riscv.c (_bfd_riscv_relax_section): Likewise. * elfxx-mips.c (_bfd_mips_elf_relax_section): Likewise. 2023-02-23 Alan Modra Test SEC_HAS_CONTENTS before reading section contents bfd_malloc_and_get_section does size sanity checking before allocating memory and reading contents. These size checks are not done for bss style sections, because they typically don't occupy file space and thus can't be compared against file size. However, if you are expecting to look at something other than a whole lot of zeros, don't allow fuzzers to avoid the size checking. * cofflink.c (process_embedded_commands): Don't look at sections without SEC_HAS_CONTENTS set. * cpu-arm.c (bfd_arm_update_notes): Likewise. (bfd_arm_get_mach_from_notes): Likewise. * elf-eh-frame.c (_bfd_elf_parse_eh_frame): Likewise. * elf-hppa.h (elf_hppa_sort_unwind): Likewise. * elf-m10300.c (mn10300_elf_relax_section): Likewise. * elf-sframe.c (_bfd_elf_parse_sframe): Likewise. * elf.c (_bfd_elf_print_private_bfd_data): Likewise. * elf32-arm.c (bfd_elf32_arm_process_before_allocation): Likewise. * elf32-avr.c (avr_elf32_load_property_records): Likewise. * elf32-ppc.c (_bfd_elf_ppc_set_arch): Likewise. (ppc_elf_get_synthetic_symtab, ppc_elf_relax_section): Likewise. * elf64-ppc.c (ppc64_elf_get_synthetic_symtab): Likewise. (opd_entry_value, ppc64_elf_edit_opd, ppc64_elf_edit_toc): Likewise. * elf64-x86-64.c (elf_x86_64_get_synthetic_symtab): Likewise. * elflink.c (elf_link_add_object_symbols): Likewise. (bfd_elf_get_bfd_needed_list): Likewise. * elfnn-aarch64.c (get_plt_type): Likewise. * elfxx-mips.c (_bfd_mips_elf_get_synthetic_symtab): Likewise. * linker.c (_bfd_handle_already_linked): Likewise. * opncls.c (bfd_get_debug_link_info_1): Likewise. (bfd_get_alt_debug_link_info, get_build_id): Likewise. * peXXigen.c (pe_print_idata, pe_print_pdata): Likewise. (_bfd_XX_print_ce_compressed_pdata, pe_print_reloc): Likewise. * pei-x86_64.c (pex64_bfd_print_pdata_section): Likewise. * stabs.c (_bfd_link_section_stabs): Likewise. (_bfd_discard_section_stabs): Likewise. * xcofflink.c (_bfd_xcoff_get_dynamic_symtab_upper_bound): Likewise. (_bfd_xcoff_canonicalize_dynamic_symtab): Likewise. (_bfd_xcoff_get_dynamic_reloc_upper_bound): Likewise. (_bfd_xcoff_canonicalize_dynamic_reloc): Likewise. (xcoff_link_add_dynamic_symbols): Likewise. (xcoff_link_check_dynamic_ar_symbols): Likewise. (bfd_xcoff_build_dynamic_sections): Likewise. 2023-02-23 GDB Administrator Automatic date update in version.in 2023-02-22 Pedro Alves gdb.reverse/time-reverse.exp: test both time syscall and C time function Instead of only testing this on systems that have a SYS_time syscall, test it everywhere using the time(2) C function, and in addition, run the tests again using the SYS_time syscall. The C variant ensures that if some platform uses some syscall we are not aware of yet, we'll still exercise it, and likely fail, at which point we should teach GDB about the syscall. The explicit syscall variant is useful on platforms where the C function does not call a syscall at all by default, e.g., on some systems the C time function wraps an implementation provided by the vDSO. Approved-By: Tom de Vries Change-Id: Id4b755d76577d02c46b8acbfa249d9c31b587633 2023-02-22 Jan Beulich x86-64: LAR and LSL don't need REX.W Just like we suppress emitting REX.W for e.g. MOV from/to segment register, there's also no need for it for LAR and LSL - these can only ever return 32-bit values and hence always zero-extend their results anyway. While there also drop the redundant Word from the first operand of the second template each - this is already implied by Reg16. 2023-02-22 Jan Beulich x86: optimize BT{,C,R,S} $imm,%reg In 64-bit mode BT can have REX.W or a data size prefix dropped in certain cases. Outside of 64-bit mode all 4 insns can have the data size prefix dropped in certain cases. 2023-02-22 Alan Modra set bfd_error on make_tempname or make_tempdir failure * bucomm.c (make_tempname, make_tempdir): Set bfd_error on error. 2023-02-22 GDB Administrator Automatic date update in version.in 2023-02-21 Alan Modra Re: objdump read_section_stabs Also fix ubsan "applying zero offset to null pointer". * objdump.c (print_section_stabs): Avoid ubsan warning. 2023-02-21 Alan Modra Re: objdump read_section_stabs Commit f9c36cc99518 changed (and renamed) read_section_stabs with one difference in overall behaviour. Previously read_section_stabs would return a NULL for an empty section, which was then treated the same as a missing section. Now an empty section is recognized and dumped. This leads to NULL stabp and stabs_end in print_section_stabs. Since stabs_end - STABSIZE is then a pointer to a very large address, the test "stabp < stabs_end - STABSIZE" succeeds. * objdump.c (print_section_stabs): Correct STABSIZE comparison. 2023-02-21 Alan Modra debug_link duplicate file size checks bfd_malloc_and_get_section does these checks. * opncls.c (bfd_get_debug_link_info_1): Don't check section size against file size. (bfd_get_alt_debug_link_info): Likewise. 2023-02-21 Tom Tromey Issue error on erroneous expression A while back I discovered that this does not issue an error: (gdb) p $x = (void * ) 57 $3 = (void *) 0x39 (gdb) p $x + 7 = 3 $6 = (void *) 0x3 This patch fixes the bug. Regression tested on x86-64 Fedora 36. Reviewed-By: Bruno Larsen Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=19312 2023-02-21 Philippe Blain gdb: add --with-curses to --configuration output 'gdb --configuration' does not mention if GDB was built with curses. Since b5075fb68d4 (Rename to allow_tui_tests, 2023-01-08) it does show --enable-tui (or --disable-tui), but one might want to know if GDB was built with curses independently of the availability of the TUI. Since configure.ac uses AC_SEARCH_LIBS to check for the curses library, we do not get an automatically defined HAVE_LIBCURSES symbol in config.in. We do have symbols defined by AC_CHECK_HEADERS (HAVE_CURSES_H, etc.) but it would be cumbersome to use those in print_gdb_configuration because we would have to check for all 6 symbols corresponding the 6 headers listed. This would also increase the maintenance burden if support for other variations of curses are added. Instead, define 'HAVE_LIBCURSES' ourselves by adding an 'action-if-found' argument to AC_SEARCH_LIBS, and use it in print_gdb_configuration. While at it, remove the condition on 'ac_cv_search_waddstr' and set 'curses_found' directly in 'action-if-found'. Change-Id: Id90e3d73990e169cee51bcc3e1d52072cfacd5b8 Approved-By: Simon Marchi 2023-02-21 Tom de Vries [gdb/testsuite] Require compilation flags in two gdb.arch/aarch64 test-cases With test-cases gdb.arch/aarch64-mte-core.exp and gdb.arch/aarch64-pauth.exp I run into compilation errors due to unsupported compilation flags. Fix this by requiring the compilation flags, such that I have instead: ... UNSUPPORTED: gdb.arch/aarch64-mte-core.exp: require failed: \ have_compile_flag -march=armv8.5-a+memtag UNSUPPORTED: gdb.arch/aarch64-pauth.exp: require failed: \ have_compile_flag -mbranch-protection=pac-ret+leaf ... Tested on aarch64-linux. 2023-02-21 Tom de Vries [gdb/testsuite] Require istarget x86* in gdb.reverse/step-indirect-call-thunk.exp On aarch64-linux, I run into: ... Running gdb.reverse/step-indirect-call-thunk.exp ... gdb compile failed, gcc: error: unrecognized command line option \ '-mindirect-branch=thunk'; did you mean '-findirect-inlining'? gcc: error: unrecognized command line option '-mfunction-return=thunk'; \ did you mean '-Wfunction-elimination'? UNTESTED: gdb.reverse/step-indirect-call-thunk.exp: failed to prepare ... Fix this by requiring istarget "x86*", similar to what was added in gdb.base/step-indirect-call-thunk.exp by commit 43127ae5714 ("Fix gdb.base/step-indirect-call-thunk.exp"), such that we have instead: ... UNSUPPORTED: gdb.reverse/step-indirect-call-thunk.exp: require failed: \ istarget "x86* ... Tested on x86_64-linux and aarch64-linux. 2023-02-21 Tom de Vries [gdb/testsuite] Require -fsplit-stack in gdb.base/morestack.exp On aarch64-linux, I run into: ... gdb compile failed, cc1: error: '-fsplit-stack' is not supported by this \ compiler configuration UNTESTED: gdb.base/morestack.exp: failed to prepare ... Fix this by requiring -fsplit-stack, such that we have instead: ... UNSUPPORTED: gdb.base/morestack.exp: require failed: \ expr [have_compile_flag -fsplit-stack] ... Tested on x86_64-linux and aarch64-linux. 2023-02-21 Tom de Vries [gdb/testsuite] Require syscall time in gdb.reverse/time-reverse.exp On aarch64-linux, I run into: ... Running gdb.reverse/time-reverse.exp ... gdb compile failed, gdb.reverse/time-reverse.c: In function 'main': gdb.reverse/time-reverse.c:39:12: error: 'SYS_time' undeclared \ (first use in this function); did you mean 'SYS_times'? syscall (SYS_time, &time_global); ^~~~~~~~ SYS_times gdb.reverse/time-reverse.c:39:12: note: each undeclared identifier is \ reported only once for each function it appears in UNTESTED: gdb.reverse/time-reverse.exp: failed to prepare ... Fix this by adding a new proc have_syscall, and requiring syscall time, such that we have instead: ... UNSUPPORTED: gdb.reverse/time-reverse.exp: require failed: \ expr [have_syscall time] ... Tested on x86_64-linux and aarch64-linux. 2023-02-21 Tom de Vries [gdb/testsuite] Require python in gdb.dap/basic-dap.exp When running test-case gdb.dap/basic-dap.exp with a gdb without python support, I run into: ... builtin_spawn gdb -nw -nx -iex set height 0 -iex set width 0 \ -data-directory data-directory -iex set debug dap-log-file dap.log.1 -q \ -i=dap >>> {"seq": 1, "type": "request", "command": "initialize"} Interpreter `dap' unrecognized ERROR: eof reading json header ... Fix this by requiring python in the test-case. Tested on x86_64-linux, both with a gdb without and with python. 2023-02-21 Nick Clifton Update the description of the bfd_fill_in_gnu_debuglink_section function Updated translatios for the bfd and gprof directories. 2023-02-21 Clément Chigot gas/testsuite: adjust a test for case insensitive file systems When dealing with case insensitive file systems, ".file line.s" and ".file Line.s" are identical and thus gas won't change the current input file. However, in line.l test, it's expecting to trigger an input file switch. As the second filename doesn't matter in it, change it to fit for those file systems. gas/ChangeLog: * testsuite/gas/elf/line.l: Change Line.s to Line2.s. * testsuite/gas/elf/line.s: Adjust output. 2023-02-21 Luis Machado [aarch64] Enable pointer authentication support for aarch64 bare metal/kernel mode addresses At the moment GDB only handles pointer authentication (pauth) for userspace addresses and if we're debugging a Linux-hosted program. The Linux Kernel can be configured to use pauth instructions for some additional security hardening, but GDB doesn't handle this well. To overcome this limitation, GDB needs a couple things: 1 - The target needs to advertise pauth support. 2 - The hook to remove non-address bits from a pointer needs to be registered in aarch64-tdep.c as opposed to aarch64-linux-tdep.c. There is a patch for QEMU that addresses the first point, and it makes QEMU's gdbstub expose a couple more pauth mask registers, so overall we will have up to 4 pauth masks (2 masks or 4 masks): pauth_dmask pauth_cmask pauth_dmask_high pauth_cmask_high pauth_dmask and pauth_cmask are the masks used to remove pauth signatures from userspace addresses. pauth_dmask_high and pauth_cmask_high masks are used to remove pauth signatures from kernel addresses. The second point is easily addressed by moving code around. When debugging a Linux Kernel built with pauth with an unpatched GDB, we get the following backtrace: #0 __fput (file=0xffff0000c17a6400) at /repos/linux/fs/file_table.c:296 #1 0xffff8000082bd1f0 in ____fput (work=) at /repos/linux/fs/file_table.c:348 #2 0x30008000080ade30 [PAC] in ?? () #3 0x30d48000080ade30 in ?? () Backtrace stopped: previous frame identical to this frame (corrupt stack?) With a patched GDB, we get something a lot more meaningful: #0 __fput (file=0xffff0000c1bcfa00) at /repos/linux/fs/file_table.c:296 #1 0xffff8000082bd1f0 in ____fput (work=) at /repos/linux/fs/file_table.c:348 #2 0xffff8000080ade30 [PAC] in task_work_run () at /repos/linux/kernel/task_work.c:179 #3 0xffff80000801db90 [PAC] in resume_user_mode_work (regs=0xffff80000a96beb0) at /repos/linux/include/linux/resume_user_mode.h:49 #4 do_notify_resume (regs=regs@entry=0xffff80000a96beb0, thread_flags=4) at /repos/linux/arch/arm64/kernel/signal.c:1127 #5 0xffff800008fb9974 [PAC] in prepare_exit_to_user_mode (regs=0xffff80000a96beb0) at /repos/linux/arch/arm64/kernel/entry-common.c:137 #6 exit_to_user_mode (regs=0xffff80000a96beb0) at /repos/linux/arch/arm64/kernel/entry-common.c:142 #7 el0_svc (regs=0xffff80000a96beb0) at /repos/linux/arch/arm64/kernel/entry-common.c:638 #8 0xffff800008fb9d34 [PAC] in el0t_64_sync_handler (regs=) at /repos/linux/arch/arm64/kernel/entry-common.c:655 #9 0xffff800008011548 [PAC] in el0t_64_sync () at /repos/linux/arch/arm64/kernel/entry.S:586 Backtrace stopped: Cannot access memory at address 0xffff80000a96c0c8 2023-02-21 Clément Chigot ld/testsuite: don't output to /dev/null Mingw doesn't have /dev/null and thus "-o /dev/null" will fail. Currently, all the options are checked using this "-o /dev/null", resulting in them being disabled on mingw hosts. Fix that by outputting to a real file for all targets. ld/ChangeLog: * testsuite/config/default.exp: Replace "-o /dev/null" by a file. 2023-02-21 Alan Modra Both FAIL and PASS "check sections 2"? * testsuite/ld-checks/checks.exp (check sections 2): Don't continue on with rest of test past first fail. ld-libs test on alpha-vms * testsuite/ld-libs/libs.exp: Don't run for alpha-vms. 2023-02-21 Alan Modra alpha-*-vms missing libraries For this: ./ld-new: cannot find -limagelib: No such file or directory ./ld-new: cannot find -lstarlet: No such file or directory ./ld-new: cannot find -lsys$public_vectors: No such file or directory the logs showed creating dummy tmpdir/libimagelib: creating dummy No creating dummy such etc. So rubbish instead of tmpdir/libimagelib.a and the other required libs. * testsuite/config/default.exp: Correct regex detecting missing libraries automatically searched by alpha-dec-vms-ld. 2023-02-21 GDB Administrator Automatic date update in version.in 2023-02-20 Tom Tromey Redefine FUNCTION in doc.str FUNCTION is identical to func, so simplify doc.str. 2023-02-17 Tom Tromey * doc/doc.str (FUNCTION): Call func. 2023-02-20 Tom Tromey Hoist the SECTION comment in opncls.c The opening and closing node in BFD starts: File: bfd.info, [...] /* Set to N to open the next N BFDs using an alternate id space. */ extern unsigned int bfd_use_reserved_id; 2.13 Opening and closing BFDs ============================= That is, there's a stray C comment and declaration before any other text or subsections. This occurs because the code fragment for bfd_use_reserved_id comes before the SECTION comment. Hoisting it makes this a little nicer. 2023-02-17 Tom Tromey * opncls.c: Hoist the SECTION comment. 2023-02-20 Tom Tromey Don't use chew comments for static functions I found a few static functions in the BFD manual. These can't be called by any user of the library, so I don't think it's useful to put them in the manual. This patch removes the chew markup from their comments. 2023-02-17 Tom Tromey * opncls.c (bfd_get_debug_link_info_1, separate_debug_file_exists) (separate_alt_debug_file_exists, find_separate_debug_file) (get_build_id, get_build_id_name, check_build_id_file): Don't use chew comments. 2023-02-20 Tom Tromey Fix formatting of long function description in chew output Currently, if a function description spans a line, the resulting info can look like this: -- Function: long bfd_canonicalize_reloc (bfd *abfd, asection *sec, arelent **loc, asymbol **syms); Call the back end associated with the open BFD ABFD and translate the external form of the relocation information attached to SEC into the internal canonical form. Place the table into memory at LOC, That is, the function prototype runs together with the text in an ugly way. This patch fixes this by introducing a new primitive, so that the generated Texinfo can be a bit nicer. Now this output looks like: -- Function: long bfd_canonicalize_reloc (bfd *abfd, asection *sec, arelent **loc, asymbol **syms); Call the back end associated with the open BFD ABFD and translate the external form of the relocation information attached to SEC 2023-02-17 Tom Tromey * doc/doc.str (SYNOPSIS): Use collapse_whitespace. * doc/chew.c (collapse_whitespace): New function. (main): Register collapse_whitespace. 2023-02-20 Andreas Schwab opcodes: style m68k disassembler output 2023-02-20 Simon Marchi gdb: revert one erroneous bool-ification change Commit 42c13555ff88 ("Change value::m_stack to bool") erroneously changed a `0` to `false` in this call to read_value_memory. This parameter is `LONGEST bit_offset`, it should stay `0`. Change-Id: I128df6834cf8055ec6a7051e237e379978d3d651 2023-02-20 Clément Chigot ld/testsuite: handle Windows drive letter in a noinit test The regexp in "noinit sections (ld -r)" is skipping the file path before the first ":". However, on Windows, a path can start with "C:". Adjust the regexp to allow such cases. ld/ChangeLog: * testsuite/ld-elf/noinit-sections-2.l: Allow Windows paths (starting with C:). 2023-02-20 Clément Chigot ld/testsuite: adjust to Windows path separator. In some tests, the path reported on Windows will have a \ instead of a /. This occurs when a file is concatened with the search path in ldfile.c.: "ld -Ltmpdir -ltext" will result into "tmpdir\libtext.a". ld/ChangeLog: * testsuite/ld-elf/retain5.map: Allow \ path separator. * testsuite/ld-plugin/plugin-10.d: Likewise. * testsuite/ld-plugin/plugin-11.d: Likewise. * testsuite/ld-plugin/plugin-18.d: Likewise. * testsuite/ld-plugin/plugin-19.d: Likewise. * testsuite/ld-plugin/plugin-20.d: Likewise. * testsuite/ld-plugin/plugin-22.d: Likewise. 2023-02-20 Andrew Burgess gdb/doc: Consistency fixes for GDB/MI documentation I noticed two inconsistencies in the GDB/MI documentation, which this commit addresses: 1. Each MI command is introduced like this: @subheading The @code{-command-name} Command Except for a few of the tracing command, which just use: @subheading -command-name In this commit I've updated all these trace commands to use the more common format. 2. Each MI command starts with a @subheading, and then the details of that command are split up using multiple @subsubheading entries. Except for a few commands which use @subheading for the top-level command, and then continue to use @subheading for each part of the command description. In this commit I've updated these to use @subsubheading where appropriate. 2023-02-20 Nick Clifton So the linker from producing an export data table when run with --exclude-all-symbols. PR 30004 * pe-dll.c (pe_dll_build_sections): Do not build an edata section if all symbols are being excluded. 2023-02-20 Tom de Vries [gdb/symtab] Trust epilogue unwind info for unknown or non-gcc producer Currently we only trust epilogue unwind info only for gcc >= 4.5.0. This has the effect that we don't trust epilogue unwind info for: - unknown producers (CU without DW_AT_producer attribute) - non-gcc producers (say, clang). Instead, only distrust epilogue unwind info only for gcc < 4.5.0. 2023-02-20 Tom de Vries [gdb/symtab] Trust epilogue unwind info for unknown producer (-g0 case) For a -g0 -fasynchronous-unwind-tables exec (without .debug_info but with .eh_frame section), start using the dwarf2 unwinder instead of the "amd64 epilogue override" unwinder, by returning true in compunit_epilogue_unwind_valid for cust == nullptr. This has effect both on the amd64 and i386 targets, but only add amd64 test-case gdb.base/unwind-on-each-insn-amd64-2.exp. 2023-02-20 Tom de Vries [gdb/tdep] Add amd64/i386 epilogue override unwinders For amd64 the current frame-unwinders are: ... $ gdb -q -batch -ex "set arch i386:x86-64" -ex "maint info frame-unwinders" The target architecture is set to "i386:x86-64". dummy DUMMY_FRAME dwarf2 tailcall TAILCALL_FRAME inline INLINE_FRAME python NORMAL_FRAME amd64 epilogue NORMAL_FRAME dwarf2 NORMAL_FRAME dwarf2 signal SIGTRAMP_FRAME amd64 sigtramp SIGTRAMP_FRAME amd64 prologue NORMAL_FRAME ... For a -g0 -fasynchronous-unwind-tables exec (without .debug_info but with .eh_frame section), we'd like to start using the dwarf2 unwinder instead of the "amd64 epilogue" unwinder, by returning true in compunit_epilogue_unwind_valid for cust == nullptr. But we'd run into the following problem for a -g0 -fno-asynchronous-unwind-tables (without .debug_info and .eh_frame section) exec: - the "amd64 epilogue" unwinder would not run (because compunit_epilogue_unwind_valid () == true) - the dwarf2 unwinder would also not run (because there's no .eh_frame info). Fix this by: - renaming the "amd64 epilogue" unwinder to "amd64 epilogue override", and - adding a fallback "amd64 epilogue" after the dwarf unwinders, while making sure that only one of the two is active. Likewise for i386. NFC. For amd64, this results in this change: ... $ gdb -q -batch -ex "set arch i386:x86-64" -ex "maint info frame-unwinders" The target architecture is set to "i386:x86-64". dummy DUMMY_FRAME dwarf2 tailcall TAILCALL_FRAME inline INLINE_FRAME python NORMAL_FRAME -amd64 epilogue NORMAL_FRAME +amd64 epilogue override NORMAL_FRAME dwarf2 NORMAL_FRAME dwarf2 signal SIGTRAMP_FRAME +amd64 epilogue NORMAL_FRAME amd64 sigtramp SIGTRAMP_FRAME amd64 prologue NORMAL_FRAME ... And for i386: ... $ gdb -q -batch -ex "set arch i386" -ex "maint info frame-unwinders" The target architecture is set to "i386". dummy DUMMY_FRAME dwarf2 tailcall TAILCALL_FRAME iline INLINE_FRAME -i386 epilogue NORMAL_FRAME +i386 epilogue override NORMAL_FRAME dwarf2 NORMAL_FRAME dwarf2 signal SIGTRAMP_FRAME +i386 epilogue NORMAL_FRAME i386 stack tramp NORMAL_FRAME i386 sigtramp SIGTRAMP_FRAME i386 prologue NORMAL_FRAME ... 2023-02-20 Tom de Vries [gdb/tdep] Fix amd64/i386_stack_frame_destroyed_p The use of compunit_epilogue_unwind_valid in both amd64_stack_frame_destroyed_p and i386_stack_frame_destroyed_p is problematic, in the sense that the functions no longer match their documented behaviour. Fix this by moving the use of compunit_epilogue_unwind_valid to amd64_epilogue_frame_sniffer and i386_epilogue_frame_sniffer. No functional changes. 2023-02-20 Tom de Vries [gdb/symtab] Factor out compunit_epilogue_unwind_valid Factor out compunit_epilogue_unwind_valid from both amd64_stack_frame_destroyed_p and i386_stack_frame_destroyed_p. No functional changes. Also add a comment in the new function about the assumption that in absence of producer information, epilogue unwind info is invalid. Approved-By: Tom Tromey 2023-02-20 Tom de Vries [gdb/testsuite] Add xfail case in gdb.python/py-record-btrace.exp I came across: ... gdb) PASS: gdb.python/py-record-btrace.exp: prepare record: stepi 100 python insn = r.instruction_history^M warning: Non-contiguous trace at instruction 1 (offset = 0x3e10).^M (gdb) FAIL: gdb.python/py-record-btrace.exp: prepare record: python insn = r.i\ nstruction_history ... I'm assuming it's the same root cause as for the already present XFAIL. Fix this by recognizing above warning in the xfail regexp. Tested on x86_64-linux, although sofar I was not able to trigger the warning again. Approved-By: Markus T. Metzger 2023-02-20 Tom de Vries [gdb/testsuite] Fix gdb.threads/schedlock.exp for gcc 4.8.5 Since commit 9af467b8240 ("[gdb/testsuite] Fix gdb.threads/schedlock.exp on fast cpu"), the test-case fails for gcc 4.8.5. The problem is that for gcc 4.8.5, the commit turned a two-line loop: ... (gdb) next 78 while (*myp > 0) (gdb) next 81 MAYBE_CALL_SOME_FUNCTION(); (*myp) ++; (gdb) next 78 while (*myp > 0) ... into a three-line loop: ... (gdb) next 83 MAYBE_CALL_SOME_FUNCTION(); (*myp) ++; (gdb) next 84 cnt++; (gdb) next 85 } (gdb) next 83 MAYBE_CALL_SOME_FUNCTION(); (*myp) ++; (gdb) ... and the test-case doesn't expect this. Fix this by reverting back to the original loop shape as much as possible by: - removing the cnt++ line - replacing "while (1)" with "while (one)", where one is a volatile variable set to 1. Tested on x86_64-linux, using compilers: - gcc 4.8.5, 7.5.0, 12.2.1 - clang 4.0.1, 13.0.1 2023-02-20 Alan Modra In-memory nested archives alpha-linuxecoff has compressed archives that are decompressed to a bfd-in-memory. We'd need to handle quite a lot of corner cases to support nesting of such archives, so just stop it before we run into segfaults later. * opncls.c (_bfd_new_bfd_contained_in): Prohibit nested archives in memory. 2023-02-20 GDB Administrator Automatic date update in version.in 2023-02-19 Tom Tromey Convert contained_in to method This converts contained_in to be a method of block. Make block members 'private' This changes block to make the data members 'private'. Remove allocate_block and allocate_global_block This removes allocate_block and allocate_global_block in favor of simply calling 'new'. Have global_block inherit from block This changes global_block to inherit from block, which is what was always intended. Use 'new' for block and global_block This changes block and global_block to add initializers, and then to use 'new' for allocation. 2023-02-19 Tom Tromey Fix memory leak in mdebugread.c mdebugread.c allocates blocks on the heap. However, this is a memory leak if the corresponding objfile is ever destroyed. This patch changes this code to use allocate_block instead, fixing a FIXME from 2003. I don't know how to test this patch. 2023-02-19 Tom Tromey Remove ALL_BLOCK_SYMBOLS This removes ALL_BLOCK_SYMBOLS in favor of foreach. Remove ALL_BLOCK_SYMBOLS_WITH_NAME This removes ALL_BLOCK_SYMBOLS_WITH_NAME in favor of foreach. Convert explicit iterator uses to foreach This converts most existing explicit uses of block_iterator to use foreach with the range iterator instead. Introduce a block iterator wrapper This introduces a C++-style iterator that wraps the existing block_iterator. It also adds a range adapter. These will be used in a later patch. Combine both styles of block iterator This merges the two styles of block iterator, having the initialization API decide which to use based on an optional parameter. Store 'name' in block_iterator This changes the block_iterator to store the 'name' that is used by block_iter_match_next. This avoids any problem where the name could be passed inconsistently, and also makes the subsequent patches easier to understand. Convert block_static_link to method This converts block_static_link to be a method. This was mostly written by script. Convert set_block_compunit_symtab to method This converts set_block_compunit_symtab to be a method. This was mostly written by script. Convert block_static_block and block_global_block to methods This converts block_static_block and block_global_block to be methods. This was mostly written by script. It was simpler to convert them at the same time because they're often used near each other. Convert block_containing_function to method This converts block_containing_function to be a method. This was mostly written by script. Convert block_linkage_function to method This converts block_linkage_function to be a method. This was mostly written by script. Convert more block functions to methods This converts block_scope, block_set_scope, block_using, and block_set_using to be methods. These are all done at once to make it easier to also convert block_initialize_namespace at the same time. This was mostly written by script. Convert block_inlined_p to method This converts block_inlined_p to be a method. This was mostly written by script. Convert block_gdbarch to method This converts block_gdbarch to be a method. This was mostly written by script. Convert block_objfile to method This converts block_objfile to be a method. This was mostly written by script. Don't allow NULL as an argument to block_global_block block_global_block has special behavior when the block is NULL. Remove this and patch up the callers instead. Don't allow NULL as an argument to block_static_block block_static_block has special behavior when the block is NULL. Remove this and patch up the callers instead. Don't allow NULL as an argument to block_using block_using has special behavior when the block is NULL. Remove this. No caller seems to be affected. Don't allow NULL as an argument to block_scope block_scope has special behavior when the block is NULL. Remove this and patch up the callers instead. Avoid extra allocations in block block_set_scope and block_set_using unconditionally allocate the block namespace object. However, this isn't truly needed, so arrange to only allocate when it is. Rearrange block.c to avoid a forward declaration Moving block_initialize_namespace before its callers lets us avoid a forward declaration. 2023-02-19 Alan Modra Buffer overflow in evax_bfd_print_eobj * vms-alpha.c (evax_bfd_print_eobj): Rewrite header handling, sanity checking rec_len. Check bfd_malloc return. 2023-02-19 Tom Tromey Avoid memory leak in chew An earlier patch of mine introduced a memory leak in chew. The bug was that the new "variable" word didn't free the following word. This patch fixes it by arranging to transfer ownership of the name to the variable itself. * doc/chew.c (add_variable): New function, from add_intrinsic_variable. (add_intrinsic_variable): Call add_variable. (compile): Call add_variable. 2023-02-19 GDB Administrator Automatic date update in version.in 2023-02-18 Tom Tromey Fix "start" for D, Rust, etc The new DWARF indexer broke "start" for some languages. For D, it is broken because, while the code in cooked_index_shard::add specifically excludes Ada, it fails to exclude D. This means that the C "main" will be detected as "main" here -- whereas what is intended is for the code in find_main_name to use d_main_name to find the name. The Rust compiler, on the other hand, uses DW_AT_main_subprogram. However, the code in dwarf2_build_psymtabs_hard fails to create a fully-qualified name, so the name always ends up as plain "main". For D and Ada, a very simple approach suffices: remove the check against "main" from cooked_index_shard::add. This also has the benefit of slightly speeding up DWARF indexing. I assume this approach will work for Pascal and Modula-2 as well, but I don't have a way to test those at present. For Rust, though, this is not sufficient. And, computing the fully-qualified name in dwarf2_build_psymtabs_hard will crash, because cooked_index_entry::full_name uses the canonical name -- and that is not computed until after canonicalization. However, we don't want to wait for canonicalization to be done before computing the main name. That would remove any benefit from doing canonicalization is the background. This patch solves this dilemma by noticing that languages using DW_AT_main_subprogram are, currently, disjoint from languages requiring canonicalization. Because of this, we can add a parameter to full_name to let us avoid crashes, slowdowns, and races here. This is kind of tricky and ugly, so I've tried to comment it sufficiently. While doing this, I had to change gdb.dwarf2/main-subprogram.exp. A different possibility here would be to ignore the canonicalization needs of C in this situation, because those only affect certain types. However, I chose this approach because the test case is artificial anyhow. A long time ago, in an earlier threading attempt, I changed the global current_language to be a function (hidden behind a macro) to let us attempt lazily computing the current language. Perhaps this approach could still be made to work. However, that also seemed rather tricky, more so than this patch. Reviewed-By: Andrew Burgess Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30116 2023-02-18 Tom Tromey Fix crash in go_symbol_package_name go_symbol_package_name package name asserts that it is only passed a Go symbol, but this is not enforced by one caller. It seems simplest to just check and return early in this case. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17876 Reviewed-By: Andrew Burgess 2023-02-18 Tom Tromey Avoid manual memory management in go-lang.c I noticed a couple of spots in go-lang.c that could be improved by using unique_ptr. Reviewed-By: Andrew Burgess 2023-02-18 GDB Administrator Automatic date update in version.in 2023-02-17 Andrew Burgess gdb: fix regression in gdb.xml/maint_print_struct.exp A regression in gdb.xml/maint_print_struct.exp was introduced with commit: commit 81b86eced24f905545b58aa6c27478104c364976 Date: Fri Jan 6 09:30:40 2023 -0700 Do not record a rejected target description The test relied on an invalid target description being stored within the tdesc_info of the current inferior, the above commit stopped this behaviour. Update the test to check that the invalid architecture is NOT stored, and then check printing the target description directly from the file. Approved-By: Tom Tromey 2023-02-17 Vladimir Mezentsev gprofng: fix Dwarf reader for DW_TAG_subprogram gprofng/ChangeLog 2023-02-16 Vladimir Mezentsev * src/Dwarf.cc: Skip DW_TAG_subprogram when DW_AT_declaration is 1. 2023-02-17 Vladimir Mezentsev gprofng: PR30036 Build failure on aarch64 w/ glibc: symbol `pwrite64' is already defined gprofng/ChangeLog 2023-02-16 Vladimir Mezentsev PR gprofng/30036 * libcollector/iotrace.c: Define creat64 and pwrite64 only when __USE_LARGEFILE64 and __USE_FILE_OFFSET64 are not defined. * libcollector/mmaptrace.c: Likewise for mmap64. 2023-02-17 Aditya Vidyadhar Kamath Fix multi-threaded debugging under AIX Multi-threaded debugging using the libpthdebug debug interface is currently broken due to multiple issues. When debugging a single inferior, we were getting assertion failures in get_aix_thread_info as no tp->priv structure was allocated for the main thread. We fixed this by switching the main thread from a (pid, 0, 0) ptid_t to a (pid, 0, tid) ptid_t and allocaing the tp->priv structure in sync_threadlists. As a result, the switch_to_thread call in pdc_read_data could now fail since the main thread no longer uses (pid, 0, 0). So we replaced the call by only switching inferior_ptid, the current inferior, and the current address space (like proc-service.c). Add similar switching to pdc_write_data where it was missing completely. When debugging multiple inferiors, an additional set of problems prevented correct multi-threaded debugging: First of all, aix-thread.c used to have a number of global variables holding per-inferior information. We switched hese to a per-inferior data structure instead. Also, sync_threadlists was getting confused as we were comparing the list of threads returned by libpthdebug for *one* process with GDB's list of threads for *all* processes. Now we only use he GDB threads of the current inferior instead. We also skip calling pd_activate from pd_enable if that in_initial_library_scan flag is true for the current inferior. Finally, the presence of the thread library in any but the first inferior was not correctly detected due to a bug in solib-aix.c, where the BFD file name for shared library members was changed when the library was loaded for the first time, which caused the library to no longer be recognized by name when loaded a second time. 2023-02-17 Tom Tromey Remove two unnecessary returns in ada-lang.c I found a couple of spots in ada-lang.c where a return follows a call to error. These are unnecessary because error never returns. 2023-02-17 Tom de Vries [gdb/testsuite] Simplify gdb.arch/amd64-disp-step-avx.exp On SLE-11, with glibc 2.11.3, I run into: ... (gdb) PASS: gdb.arch/amd64-disp-step-avx.exp: vex3: \ var128 has expected value after continue^M Continuing.^M ^M Program received signal SIGSEGV, Segmentation fault.^M 0x0000000000400283 in _exit (status=0) at \ ../sysdeps/unix/sysv/linux/_exit.c:33^M 33 ../sysdeps/unix/sysv/linux/_exit.c: No such file or directory.^M (gdb) FAIL: gdb.arch/amd64-disp-step-avx.exp: \ continue until exit at amd64-disp-step-avx ... This is not related to gdb, we get the same result by just running the exec. The problem is that the test-case: - calls glibc's _exit, and - uses -nostartfiles -static, putting the burden for any necessary initialization for calling glibc's _exit on the test-case itself. So, when we get to the second insn in _exit: ... 000000000040acb0 <_exit>: 40acb0: 48 63 d7 movslq %edi,%rdx 40acb3: 64 4c 8b 14 25 00 00 mov %fs:0x0,%r10 ... no glibc-related initialization is done, and we run into the segfault. Adding this (borrowed from __libc_start_main) in _start in the .S file is sufficient to fix it: ... .rept 200 nop + call __pthread_initialize_minimal .endr ... But that already doesn't compile with say glibc 2.31, and regardless I think this sort of fix is too fragile. We could of course fix this by simply not running to exit. But ideally we'd have an exec that doesn't segfault when you just run it. Alternatively, we could hand-code an _exit syscall and bypass glibc all together. But I'd rather fix this in a way that simplifies the test-case. Taking a step back, the -nostartfiles -static was added to address that the xmm registers were not zero at main (which AFAICT is a valid thing to happen). [ The change itself silently broke the test-case, needing further fixing by commit 40310f30a51 ("gdb: make gdb.arch/amd64-disp-step-avx.exp actually test displaced stepping"). ] Instead, simplify things by reverting to the original situation: - no -nostartfiles -static compilation flags, - no _start in the .S file, - use exit instead of _exit in the .S file, and fix the original problem by setting the xmm registers to zero rather than checking that they're zero. Now that we're no longer forcing -static, add nopie to the flags to prevent compilation failure with target board unix/-fPIE/-pie. Tested on x86_64-linux. PR testsuite/30132 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30132 2023-02-17 Alan Modra ld test asciz and ascii fails Fix these fails: alpha-dec-vms +FAIL: ld-scripts/asciz alpha-dec-vms +FAIL: ld-scripts/ascii i386-go32 +FAIL: ld-scripts/asciz sh-coff +FAIL: ld-scripts/asciz It's better to positively select targets for .section support than to try to exclude all targets that don't. Make a new is_coff_format so we can easily select such. binutils/ * testsuite/lib/binutils-common.exp (is_coff_format): New. ld/ * testsuite/ld-scripts/ascii.d: Use is_elf_format and is_coff_format to select targets, exclude ti coff. * testsuite/ld-scripts/asciz.d: Likewise. Accept trailing zeros. 2023-02-17 Alan Modra Wild pointer reads in _bfd_ecoff_locate_line * ecofflink.c (mk_fdrtab): Sanity check fdr procedure descriptor pointer and isymBase. Set fdrtab_len after possible discards. Use size_t vars and catch possible size overflows. 2023-02-17 GDB Administrator Automatic date update in version.in 2023-02-16 Alan Modra PR30046, power cmpi leads to unknown architecture PowerPC ELF always uses bfd_arch_powerpc, so we shouldn't allow the gas -mpwr, -mpwr2 or -mpwrx options to choose bfd_arch_rs6000. Given the possible values of ppc_cpu, I think the as_fatal at the end of ppc_arch will never be reached, so it can be deleted and the code simplified a little. PR 30046 * config/tc-ppc.c (ppc_arch): Return bfd_arch_powerpc for ELF. Delete dead code. 2023-02-16 Tom Tromey Rename parameter of create_ada_exception_catchpoint create_ada_exception_catchpoint has a parameter named "disabled", but both its callers and callees use it to mean "enabled". This is confusing, so this patch renames the parameter. 2023-02-16 Tom Tromey Update the 'g' packet documentation The 'g' packet documentation references a macro that no longer exists, and it also claims that the 'x' response for an unavailable register is limited to trace frames. This patch updates the documentation to reflect what I think is currently correct. Co-Authored-By: Pedro Alves Approved-By: Eli Zaretskii Change-Id: I863baa3b9293059cfd4aa3d534602cbcb693ba87 2023-02-16 Nick Clifton Add support for the ASCII directive inside linker scripts. * ldlex.l: Add ASCII token. * ldgram.y: Add parsing of the ASCII command. * ldlang.c (lang_add_string): Add maximum size parameter. Move escape character handling code into separate function. * ldlang.h (lang_add_string): Update prototype. * NEWS: Mention the new feature. * ld.texi (Output Section Data): Document the new directives. * testsuite/ld-scripts/asciz.t: Adjust to work on more architectures and to test more aspects of the ASCIZ directive. * testsuite/ld-scripts/asciz.d: Adjust to match the changes to the test linker script. * testsuite/ld-scripts/ascii.d: New test driver. * testsuite/ld-scripts/ascii.s: New test assembler source. * testsuite/ld-scripts/ascii.t: New test script. * testsuite/ld-scripts/script.exp: Run the new test. 2023-02-16 Tom Tromey Constify ada_main_name Unlike the other *_main_name functions, ada_main_name returns a non-const "char *". This is strange, though, because the caller should not in fact modify or free this pointer. This patch changes this function to constify its return type. Remove unused declaration from ada-lang.h I stumbled across this declaration in ada-lang.h. I don't know what function did, but it no longer exists, so remove the declaration. Tested by rebuilding. 2023-02-16 Alan Modra Delete PROGRESS macros I don't see much point in cluttering the source with the PROGRESS macros, which of course do nothing at all with the definitions in progress.h. progress.h is unchanged apart from the copyright comment since commit d4d4c53c68f0 in 1994. binutils/ * ar.c: Don't include progress.h, or invoke PROGRESS macros. * nm.c: Likewise. * objcopy.c: Likewise. * objdump.c: Likewise. gas/ * as.h: Don't include progress.h. * as.c: Don't invoke PROGRESS macros. * write.c: Likewise. include/ * progress.h: Delete. ld/ * ldmain.c: Don't include progress.h, or invoke PROGRESS macros. 2023-02-16 Alan Modra gas_init Rename gas_late_init to plain gas_init, to reinforce the idea that this is where the bulk of gas initialisation belongs. Also reorder some initialisation. * as.c (gas_init): Rename from gas_late_init. Open output file and arrange for dump_statistics to be called here rather than in main. Create .gasversion. local symbol earlier, because we can. 2023-02-16 Jan Beulich RISC-V: as_warn() already emits a newline Therefore there shouldn't be any at the end of the format string. 2023-02-16 Andrew Burgess gdb/doc: document MI -remove-inferior command Back in 2010 the -remove-inferior command was added in commit a79b8f6ea8c2, unfortunately this command was never added to the documentation. This commit addresses that oversight. Approved-By: Eli Zaretskii 2023-02-16 Jan Beulich x86/gas: replace inappropriate assertion when parsing registers PR gas/30117 Once a symbol had its expression evaluated, the "segment" of the symbol may be reg_section if a register is merely involved in the expression, not just when the expression references a "plain" register. Therefore the first of the assertions put in place by 4d1bb7955a8b was too strict. Convert it to an if() to deal with situations like this one found by fuzzing: x=s s=%eax+0 y=s or $6,x In non-debug builds this also avoids potentially silently generating bad code. 2023-02-16 GDB Administrator Automatic date update in version.in 2023-02-15 Tom Tromey Return bool from more value methods There are several more value methods that currently return 'int' but that should return 'bool'. This patch updates these. Reviewed-By: Bruno Larsen 2023-02-15 Tom Tromey Have value::bits_synthetic_pointer return bool This changes value::bits_synthetic_pointer to return bool and fixes up some fallout from this. Reviewed-By: Bruno Larsen 2023-02-15 Tom Tromey Change value::m_stack to bool This changes value::m_stack to be a bool and updates the various uses. Reviewed-By: Bruno Larsen 2023-02-15 Tom Tromey Change value::m_initialized to bool This changes value::m_initialized to be a bool and updates the various uses. Reviewed-By: Bruno Larsen 2023-02-15 Tom Tromey Change value::m_lazy to bool This changes value::m_lazy to be a bool and updates the various uses. Reviewed-By: Bruno Larsen 2023-02-15 Tom Tromey Change value::m_modifiable to bool This changes value::m_modifiable to be a bool and updates the various uses. Reviewed-By: Bruno Larsen 2023-02-15 Pedro Alves Don't throw quit while handling inferior events, part II I noticed that if Ctrl-C was typed just while GDB is evaluating a breakpoint condition in the background, and GDB ends up reaching out to the Python interpreter, then the breakpoint condition would still fail, like: c& Continuing. (gdb) Error in testing breakpoint condition: Quit That happens because while evaluating the breakpoint condition, we enter Python, and end up calling PyErr_SetInterrupt (it's called by gdbpy_set_quit_flag, in frame #0): (top-gdb) bt #0 gdbpy_set_quit_flag (extlang=0x558c68f81900 ) at ../../src/gdb/python/python.c:288 #1 0x0000558c6845f049 in set_quit_flag () at ../../src/gdb/extension.c:785 #2 0x0000558c6845ef98 in set_active_ext_lang (now_active=0x558c68f81900 ) at ../../src/gdb/extension.c:743 #3 0x0000558c686d3e56 in gdbpy_enter::gdbpy_enter (this=0x7fff2b70bb90, gdbarch=0x558c6ab9eac0, language=0x0) at ../../src/gdb/python/python.c:212 #4 0x0000558c68695d49 in python_on_memory_change (inferior=0x558c6a830b00, addr=0x555555558014, len=4, data=0x558c6af8a610 "") at ../../src/gdb/python/py-inferior.c:146 #5 0x0000558c6823a071 in std::__invoke_impl (__f=@0x558c6a8ecd98: 0x558c68695d01 ) at /usr/include/c++/11/bits/invoke.h:61 #6 0x0000558c68237591 in std::__invoke_r (__fn=@0x558c6a8ecd98: 0x558c68695d01 ) at /usr/include/c++/11/bits/invoke.h:111 #7 0x0000558c68233e64 in std::_Function_handler::_M_invoke(std::_Any_data const&, inferior*&&, unsigned long&&, long&&, unsigned char const*&&) (__functor=..., __args#0=@0x7fff2b70bd40: 0x558c6a830b00, __args#1=@0x7fff2b70bd38: 93824992247828, __args#2=@0x7fff2b70bd30: 4, __args#3=@0x7fff2b70bd28: 0x558c6af8a610 "") at /usr/include/c++/11/bits/std_function.h:290 #8 0x0000558c6830a96e in std::function::operator()(inferior*, unsigned long, long, unsigned char const*) const (this=0x558c6a8ecd98, __args#0=0x558c6a830b00, __args#1=93824992247828, __args#2=4, __args#3=0x558c6af8a610 "") at /usr/include/c++/11/bits/std_function.h:590 #9 0x0000558c6830a620 in gdb::observers::observable::notify (this=0x558c690828c0 , args#0=0x558c6a830b00, args#1=93824992247828, args#2=4, args#3=0x558c6af8a610 "") at ../../src/gdb/../gdbsupport/observable.h:166 #10 0x0000558c68309d95 in write_memory_with_notification (memaddr=0x555555558014, myaddr=0x558c6af8a610 "", len=4) at ../../src/gdb/corefile.c:363 #11 0x0000558c68904224 in value_assign (toval=0x558c6afce910, fromval=0x558c6afba6c0) at ../../src/gdb/valops.c:1190 #12 0x0000558c681e3869 in expr::assign_operation::evaluate (this=0x558c6af8e150, expect_type=0x0, exp=0x558c6afcfe60, noside=EVAL_NORMAL) at ../../src/gdb/expop.h:1902 #13 0x0000558c68450c89 in expr::logical_or_operation::evaluate (this=0x558c6afab060, expect_type=0x0, exp=0x558c6afcfe60, noside=EVAL_NORMAL) at ../../src/gdb/eval.c:2330 #14 0x0000558c6844a896 in expression::evaluate (this=0x558c6afcfe60, expect_type=0x0, noside=EVAL_NORMAL) at ../../src/gdb/eval.c:110 #15 0x0000558c6844a95e in evaluate_expression (exp=0x558c6afcfe60, expect_type=0x0) at ../../src/gdb/eval.c:124 #16 0x0000558c682061ef in breakpoint_cond_eval (exp=0x558c6afcfe60) at ../../src/gdb/breakpoint.c:4971 ... The fix is to disable cooperative SIGINT handling while handling inferior events, so that SIGINT is saved in the global quit flag, and not in the extension language, while handling an event. This commit augments the testcase added by the previous commit to test this scenario as well. Approved-By: Tom Tromey Change-Id: Idf8ab815774ee6f4b45ca2d0caaf30c9b9f127bb 2023-02-15 Pedro Alves GC get_active_ext_lang get_active_ext_lang is not used anywhere. Delete it. Approved-By: Tom Tromey Change-Id: I4c2b6d0d11291103c098e4db1d6ea449875c96b7 2023-02-15 Pedro Alves Don't throw quit while handling inferior events This implements what I suggested here: https://inbox.sourceware.org/gdb-patches/ab97c553-f406-b094-cdf3-ba031fdea925@palves.net/ Here is the current default quit_handler, a function that ends up called by the QUIT macro: void default_quit_handler (void) { if (check_quit_flag ()) { if (target_terminal::is_ours ()) quit (); else target_pass_ctrlc (); } } As we can see above, when the inferior is running in the foreground, then a Ctrl-C is translated into a call to target_pass_ctrlc(). The target_terminal::is_ours() case above is there to handle the scenario where GDB has the terminal, meaning it is handling some command the user typed, like "list", or "p a + b" or some such. However, when the inferior is running on the background, say with "c&", GDB also has the terminal. Run control handling is now done in the "background". The CLI is responsive to user commands. If users type Ctrl-C, they're expecting it to interrupt whatever command they next type in the CLI, which again, could be "list", "p a + b", etc. It's as if background run control was handled by a separate thread, and the Ctrl-C is meant to go to the main thread, handling the CLI. However, when handling an event, inside fetch_inferior_event & friends, a Ctrl-C _also_ results in a Quit exception, from the same default_quit_handler function shown above. This quit aborts run control handling, breakpoint condition evaluation, etc., and may even leave run control in an inconsistent state. The testcase added by this patch illustrates this. The test program just loops a number of times calling the "foo" function. The idea is to set a breakpoint in the "foo" function with a condition that sends SIGINT to GDB, and then evaluates to false, which results in the program being re-resumed in the background. The SIGINT-sending emulates pressing Ctrl-C just while GDB was evaluating the breakpoint condition, except, it's more deterministic. It looks like this: (gdb) p $counter = 0 $1 = 0 (gdb) b foo if $counter++ == 10 || $_shell("kill -SIGINT `pidof gdb`") != 0 Breakpoint 2 at 0x555555555131: file gdb.base/bg-exec-sigint-bp-cond.c, line 21. (gdb) c& Continuing. (gdb) After that background continue, the breakpoint should be hit 10 times, and we should see 10 "Quit" being printed on the screen. As if the user typed Ctrl-C on the prompt a number of times with no inferior running: (gdb) <<< Ctrl-C (gdb) Quit <<< Ctrl-C (gdb) Quit <<< Ctrl-C (gdb) However, here's what you see instead: (gdb) c& Continuing. (gdb) Quit (gdb) Just one Quit, and nothing else. If we look at the thread's state, we see: (gdb) info threads Id Target Id Frame * 1 Thread 0x7ffff7d6f740 (LWP 112192) "bg-exec-sigint-" foo () at gdb.base/bg-exec-sigint-bp-cond.c:21 So the thread stopped, but we didn't report a stop... Issuing another continue shows the same immediate-and-silent-stop: (gdb) c& Continuing. (gdb) Quit (gdb) p $counter $2 = 2 As mentioned, since the run control handling, and breakpoint and watchpoint evaluation, etc. are running in the background from the perspective of the CLI, when users type Ctrl-C in this situation, they're thinking of aborting whatever other command they were typing or running at the prompt, not the run control side, not the previous "c&" command. So I think that we should install a custom quit_handler while inside fetch_inferior_event, where we already disable pagination and other things for a similar reason. This custom quit handler does nothing if GDB has the terminal, and forwards Ctrl-C to the inferior otherwise. With the patch implementing that, and the same testcase, here's what you see instead: (gdb) p $counter = 0 $1 = 0 (gdb) b foo if $counter++ == 10 || $_shell("kill -SIGINT `pidof gdb`") != 0 Breakpoint 2 at 0x555555555131: file gdb.base/bg-exec-sigint-bp-cond.c, line 21. (gdb) c& Continuing. (gdb) Quit (gdb) Quit (gdb) Quit (gdb) Quit (gdb) Quit (gdb) Quit (gdb) Quit (gdb) Quit (gdb) Quit (gdb) Quit (gdb) Breakpoint 2, foo () at gdb.base/bg-exec-sigint-bp-cond.c:21 21 return 0; Approved-By: Tom Tromey Change-Id: I1f10d99496a7d67c94b258e45963e83e439e1778 2023-02-15 Pedro Alves Add new "$_shell(CMD)" internal function For testing a following patch, I wanted a way to send a SIGINT to GDB from a breakpoint condition. And I didn't want to do it from a Python breakpoint or Python function, as I wanted to exercise non-Python code paths. So I thought I'd add a new $_shell internal function, that runs a command under the shell, and returns the exit code. With this, I could write: (gdb) b foo if $_shell("kill -SIGINT $gdb_pid") != 0 || I think this is generally useful, hence I'm proposing it here. Here's the new function in action: (gdb) p $_shell("true") $1 = 0 (gdb) p $_shell("false") $2 = 1 (gdb) p $_shell("echo hello") hello $3 = 0 (gdb) p $_shell("foobar") bash: line 1: foobar: command not found $4 = 127 (gdb) help function _shell $_shell - execute a shell command and returns the result. Usage: $_shell (command) Returns the command's exit code: zero on success, non-zero otherwise. (gdb) NEWS and manual changes included. Approved-By: Andrew Burgess Approved-By: Tom Tromey Approved-By: Eli Zaretskii Change-Id: I7e36d451ee6b428cbf41fded415ae2d6b4efaa4e 2023-02-15 Pedro Alves Make "ptype INTERNAL_FUNCTION" in Ada print like other languages Currently, printing the type of an internal function in Ada shows double <>s, like: (gdb) with language ada -- ptype $_isvoid type = <> while all other languages print it with a single <>, like: (gdb) with language c -- ptype $_isvoid type = I don't think there's a reason that Ada needs to be different. We currently print the double <>s because we take this path in ada_print_type: switch (type->code ()) { default: gdb_printf (stream, "<"); c_print_type (type, "", stream, show, level, language_ada, flags); gdb_printf (stream, ">"); break; ... and the type's name already has the <>s. Fix this by simply adding an early check for TYPE_CODE_INTERNAL_FUNCTION. Approved-By: Andrew Burgess Approved-By: Tom Tromey Change-Id: Ic2b6527b9240a367471431023f6e27e6daed5501 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30105 2023-02-15 Pedro Alves Fix "ptype INTERNAL_FUNC" (PR gdb/30105) Currently, looking at the type of an internal function, like below, hits an odd error: (gdb) ptype $_isvoid type = type not handled in c_type_print_varspec_prefix() That is an error thrown from c-typeprint.c:c_type_print_varspec_prefix, where it reads: ... case TYPE_CODE_DECFLOAT: case TYPE_CODE_FIXED_POINT: /* These types need no prefix. They are listed here so that gcc -Wall will reveal any types that haven't been handled. */ break; default: error (_("type not handled in c_type_print_varspec_prefix()")); break; Internal function types have type code TYPE_CODE_INTERNAL_FUNCTION, which is not explicitly handled by that switch. That comment quoted above says that gcc -Wall will reveal any types that haven't been handled, but that's not actually true, at least with modern GCCs. You would need to enable -Wswitch-enum for that, which we don't. If I do enable that warning, then I see that we're missing handling for the following type codes: TYPE_CODE_INTERNAL_FUNCTION, TYPE_CODE_MODULE, TYPE_CODE_NAMELIST, TYPE_CODE_XMETHOD TYPE_CODE_MODULE and TYPE_CODE_NAMELIST and Fortran-specific, so it'd be a little weird to handle them here. I tried to reach this code with TYPE_CODE_XMETHOD, but couldn't figure out how to. ptype on an xmethod isn't treated specially, it just complains that the method doesn't exist. I've extended the gdb.python/py-xmethods.exp testcase to make sure of that. My thinking is that whatever type code we add next, the most likely scenario is that it won't need any special handling, so we'd just be adding another case to that "do nothing" list. If we do need special casing for whatever type code, I think that tests added at the same time as the feature would uncover it anyhow. If we do miss adding the special casing, then it still looks better to me to print the type somewhat incompletely than to error out and make it harder for users to debug whatever they need. So I think that the best thing to do here is to just remove all those explicit "do nothing" cases, along with the error default case. After doing that, I decided to write a testcase that iterates over all supported languages doing "ptype INTERNAL_FUNC". That revealed that Pascal has a similar problem, except the default case hits a gdb_assert instead of an error: (gdb) with language pascal -- ptype $_isvoid type = ../../src/gdb/p-typeprint.c:268: internal-error: type_print_varspec_prefix: unexpected type A problem internal to GDB has been detected, further debugging may prove unreliable. That is fixed by this patch in the same way. You'll notice that the new testcase special-cases the Ada expected output: } elseif {$lang == "ada"} { gdb_test "ptype \$_isvoid" "<>" } else { gdb_test "ptype \$_isvoid" "" } That will be subject of the following patch. Approved-By: Andrew Burgess Change-Id: I81aec03523cceb338b5180a0b4c2e4ad26b4c4db Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30105 2023-02-15 Simon Marchi gdb/dwarf2: split .debug_names reading code to own file Move everything related to reading .debug_names from read.c to read-debug-names.c. The only entry point exposed by read-debug-names.{c,h} is dwarf2_read_debug_names. Change-Id: I18b23f3c7a61b14abc3a46e4bf559bc2d078e8bc Approved-By: Tom Tromey 2023-02-15 Simon Marchi gdb/dwarf2: split .gdb_index reading code to own file Move everything related to reading .gdb_index from read.c to read-gdb-index.c. The only entry point exposed by read-gdb-index.{c,h} is dwarf2_read_gdb_index. Change-Id: I1e32c8f0720086538de8d2f612f27545377099bc Approved-By: Tom Tromey 2023-02-15 Simon Marchi gdb/dwarf2: move some things to read.h The following 2 patches move .gdb_index and .debug_names reading code to their own file. Prepare this by exposing some things used by that code to read.h. Change-Id: If8ef135758a2ff0ab3b765cc92596da8189f3bbd Approved-By: Tom Tromey 2023-02-15 Simon Marchi gdb: fix dealloc function not being called for frame 0 Tom de Vries reported [1] a regression in gdb.btrace/record_goto.exp caused by 6d3717d4c4 ("gdb: call frame unwinders' dealloc_cache methods through destroying the frame cache"). This issue is caught by ASan. On a non-ASan build, it may or may not cause a crash or some other issue, I haven't tried. I managed to narrow it down to: $ ./gdb -nx -q --data-directory=data-directory testsuite/outputs/gdb.btrace/record_goto/record_goto -ex "start" -ex "record btrace" -ex "next" ... and then doing repeatedly "record goto 19" and "record goto 27". Eventually, I get: (gdb) record goto 27 ================================================================= ==1527735==ERROR: AddressSanitizer: heap-use-after-free on address 0x6210003392a8 at pc 0x55e4c26eef86 bp 0x7ffd229f24e0 sp 0x7ffd229f24d8 READ of size 8 at 0x6210003392a8 thread T0 #0 0x55e4c26eef85 in bfcache_eq /home/simark/src/binutils-gdb/gdb/record-btrace.c:1639 #1 0x55e4c37cdeff in htab_find_slot_with_hash /home/simark/src/binutils-gdb/libiberty/hashtab.c:659 #2 0x55e4c37ce24a in htab_find_slot /home/simark/src/binutils-gdb/libiberty/hashtab.c:703 #3 0x55e4c26ef0c6 in bfcache_new /home/simark/src/binutils-gdb/gdb/record-btrace.c:1653 #4 0x55e4c26f1242 in record_btrace_frame_sniffer /home/simark/src/binutils-gdb/gdb/record-btrace.c:1820 #5 0x55e4c1b926a1 in frame_unwind_try_unwinder /home/simark/src/binutils-gdb/gdb/frame-unwind.c:136 #6 0x55e4c1b930d7 in frame_unwind_find_by_frame(frame_info_ptr, void**) /home/simark/src/binutils-gdb/gdb/frame-unwind.c:196 #7 0x55e4c1bb867f in get_frame_type(frame_info_ptr) /home/simark/src/binutils-gdb/gdb/frame.c:2925 #8 0x55e4c2ae6798 in print_frame_info(frame_print_options const&, frame_info_ptr, int, print_what, int, int) /home/simark/src/binutils-gdb/gdb/stack.c:1049 #9 0x55e4c2ade3e1 in print_stack_frame(frame_info_ptr, int, print_what, int) /home/simark/src/binutils-gdb/gdb/stack.c:367 #10 0x55e4c26fda03 in record_btrace_set_replay /home/simark/src/binutils-gdb/gdb/record-btrace.c:2779 #11 0x55e4c26fddc3 in record_btrace_target::goto_record(unsigned long) /home/simark/src/binutils-gdb/gdb/record-btrace.c:2843 #12 0x55e4c2de2bb2 in target_goto_record(unsigned long) /home/simark/src/binutils-gdb/gdb/target.c:4169 #13 0x55e4c275ed98 in record_goto(char const*) /home/simark/src/binutils-gdb/gdb/record.c:372 #14 0x55e4c275edba in cmd_record_goto /home/simark/src/binutils-gdb/gdb/record.c:383 0x6210003392a8 is located 424 bytes inside of 4064-byte region [0x621000339100,0x62100033a0e0) freed by thread T0 here: #0 0x7f6ca34a5b6f in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:123 #1 0x55e4c38a4c17 in rpl_free /home/simark/src/binutils-gdb/gnulib/import/free.c:44 #2 0x55e4c1bbd378 in xfree /home/simark/src/binutils-gdb/gdb/../gdbsupport/gdb-xfree.h:37 #3 0x55e4c37d1b63 in call_freefun /home/simark/src/binutils-gdb/libiberty/obstack.c:103 #4 0x55e4c37d25a2 in _obstack_free /home/simark/src/binutils-gdb/libiberty/obstack.c:280 #5 0x55e4c1bad701 in reinit_frame_cache() /home/simark/src/binutils-gdb/gdb/frame.c:2112 #6 0x55e4c27705a3 in registers_changed_ptid(process_stratum_target*, ptid_t) /home/simark/src/binutils-gdb/gdb/regcache.c:564 #7 0x55e4c27708c7 in registers_changed_thread(thread_info*) /home/simark/src/binutils-gdb/gdb/regcache.c:573 #8 0x55e4c26fd922 in record_btrace_set_replay /home/simark/src/binutils-gdb/gdb/record-btrace.c:2772 #9 0x55e4c26fddc3 in record_btrace_target::goto_record(unsigned long) /home/simark/src/binutils-gdb/gdb/record-btrace.c:2843 #10 0x55e4c2de2bb2 in target_goto_record(unsigned long) /home/simark/src/binutils-gdb/gdb/target.c:4169 #11 0x55e4c275ed98 in record_goto(char const*) /home/simark/src/binutils-gdb/gdb/record.c:372 #12 0x55e4c275edba in cmd_record_goto /home/simark/src/binutils-gdb/gdb/record.c:383 previously allocated by thread T0 here: #0 0x7f6ca34a5e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55e4c0b55c60 in xmalloc /home/simark/src/binutils-gdb/gdb/alloc.c:57 #2 0x55e4c37d1a6d in call_chunkfun /home/simark/src/binutils-gdb/libiberty/obstack.c:94 #3 0x55e4c37d1c20 in _obstack_begin_worker /home/simark/src/binutils-gdb/libiberty/obstack.c:141 #4 0x55e4c37d1ed7 in _obstack_begin /home/simark/src/binutils-gdb/libiberty/obstack.c:164 #5 0x55e4c1bad728 in reinit_frame_cache() /home/simark/src/binutils-gdb/gdb/frame.c:2113 #6 0x55e4c27705a3 in registers_changed_ptid(process_stratum_target*, ptid_t) /home/simark/src/binutils-gdb/gdb/regcache.c:564 #7 0x55e4c27708c7 in registers_changed_thread(thread_info*) /home/simark/src/binutils-gdb/gdb/regcache.c:573 #8 0x55e4c26fd922 in record_btrace_set_replay /home/simark/src/binutils-gdb/gdb/record-btrace.c:2772 #9 0x55e4c26fddc3 in record_btrace_target::goto_record(unsigned long) /home/simark/src/binutils-gdb/gdb/record-btrace.c:2843 #10 0x55e4c2de2bb2 in target_goto_record(unsigned long) /home/simark/src/binutils-gdb/gdb/target.c:4169 #11 0x55e4c275ed98 in record_goto(char const*) /home/simark/src/binutils-gdb/gdb/record.c:372 #12 0x55e4c275edba in cmd_record_goto /home/simark/src/binutils-gdb/gdb/record.c:383 The problem is a stale entry in the bfcache hash table (in record-btrace.c), left across a reinit_frame_cache. This entry points to something that used to be allocated on the frame obstack, that has since been wiped by reinit_frame_cache. Before the aforementioned, unwinder deallocation functions were called by iterating on the frame chain, starting with the sentinel frame, like so: /* Tear down all frame caches. */ for (frame_info *fi = sentinel_frame; fi != NULL; fi = fi->prev) { if (fi->prologue_cache && fi->unwind->dealloc_cache) fi->unwind->dealloc_cache (fi, fi->prologue_cache); if (fi->base_cache && fi->base->unwind->dealloc_cache) fi->base->unwind->dealloc_cache (fi, fi->base_cache); } After that patch, we relied on the fact that all frames are (supposedly) in the frame_stash. A deletion function was added to the frame_stash hash table, so that dealloc functions would be called when emptying the frame stash. There is one case, however, where a frame_info is not in the frame stash. That is when we create the frame_info for the current frame (level 0, unwound from the sentinel frame), but don't compute its frame id. The computation of the frame id for that frame (and only that frame, AFAIK) is done lazily. And putting a frame_info in the frame stash requires knowing its id. So a frame 0 whose frame id is not computed yet is necessarily not in the frame stash. When replaying with btrace, record_btrace_frame_sniffer insert entries corresponding to frames in the "bfcache" hash table. It then relies on record_btrace_frame_dealloc_cache being called for each frame to remove all those entries when the frames get invalidated. If a frame reinit happens while frame 0's id is not computed (and therefore that frame is not in frame_stash), record_btrace_frame_dealloc_cache does not get called for it, and it leaves a stale entry in bfcache. That then leads to a use-after-free when that entry is accessed later, which ASan catches. The proposed solution is to explicitly call frame_info_del on frame 0, if it exists, and if its frame id is not computed. If its frame id is computed, it is expected that it will be in the frame stash, so it will be "deleted" through that. [1] https://inbox.sourceware.org/gdb-patches/20230130200249.131155-1-simon.marchi@efficios.com/T/#mcf1340ce2906a72ec7ed535ec0c97dba11c3d977 Reported-By: Tom de Vries Tested-By: Tom de Vries Change-Id: I2351882dd511f3bbc01e4152e9db13b69b3ba384 2023-02-15 Tom Tromey Remove RETURNS from BFD chew comments When reading the BFD manual, I noticed text like this: -- Function: bool bfd_close (bfd *abfd); Close a BFD. If the BFD was open for writing, then pending operations are completed and the file written out and closed. If ... *Returns* 'TRUE' is returned if all is ok, otherwise 'FALSE'. The *Returns*, like the *Synopsis* in the earlier patch, is un-info-like. It's also used inconsistently. This patch removes all the uses of the RETURNS word and removes it entirely from the chew scripts. Now this example reads: -- Function: bool bfd_close (bfd *abfd); Close a BFD. If the BFD was open for writing, then pending operations are completed and the file written out and closed. If ... 'TRUE' is returned if all is ok, otherwise 'FALSE'. In a few cases I had to slightly reword the comment. There were also a couple of cases where there was redundant text. In these cases I just dropped the RETURNS copy. 2023-02-07 Tom Tromey * bfd.c, cache.c, compress.c, opncls.c: Remove RETURNS from documentation comments. * doc/doc.str, doc/proto.str (RETURNS): Remove. 2023-02-15 Tom Tromey Use @deftypefn in chew output When reading the BFD info manual, function definitions looked very strange to me: *Synopsis* long bfd_get_mtime (bfd *abfd); *Description* Return the file modification time (as read from the file system, or from the archive header for archive members). The *Synopsis* and *Description* text in particular is very un-info-like. To fix this, I tried removing the *Synopsis* text and having FUNCTION use @deftypefn instead. However, this ended up requiring some new state, because SYNOPSIS can appear without FUNCTION. This in turn required "catstrif" (I considered adding FORTH-style if-else-then, but in the end decided on an ad hoc approach). After this the result looks like: -- Function: long bfd_get_mtime (bfd *abfd); Return the file modification time (as read from the file system, or from the archive header for archive members). This patch also reorders a few documentation comments to ensure that SYNOPSIS comes before DESCRIPTION. This is the more common style and is also now required by doc.str. 2023-02-07 Tom Tromey * syms.c (bfd_decode_symclass, bfd_is_undefined_symclass) (bfd_symbol_info): Reorder documentation comment. * doc/doc.str (synopsis_seen): New variable. (SYNOPSIS): Set synopsis_seen. Emit @deftypefn. (DESCRIPTION): Use synopsis_seen. * doc/chew.c (catstrif): New function. (main): Add catstrif intrinsic. (compile): Recognize "variable" command. 2023-02-15 Tom Tromey Change internalmode to be an intrinsic variable Currently, internalmode is a special word to set an internal state variable. Because this series adds variables anyway, change this to be a variable instead. I saw some commits in the history that made sure that chew did not leak memory, so I put some extra effort into trying to handle this for variables as well. 2023-02-07 Tom Tromey * doc/proto.str (external, internal, ifinternal, ENUMEQ, ENUMDOC): Update. * doc/chew.c (internalmode): Remove. (add_intrinsic_variable): New function. (main): Add internalmode as intrinsic. (internal_mode): Remove global. (maybecatstr): Update. (free_words): Free variables. 2023-02-15 Tom Tromey Use intptr_t rather than long in chew To implement variables in chew, it's convenient to have a pointer-sized integer on the stack. To this end, use intptr_t rather than long. 2023-02-07 Tom Tromey * doc/chew.c (pcu) : Now intptr_t. (internal_mode, istack, isp): Likewise. (bang, atsign): Use intptr_t. 2023-02-15 Tom Tromey Remove the paramstuff word The chew "paramstuff" word has been a no-op since: commit c58b95236ce4c9345c4fa76e7ef16762e5229380 Author: Alan Modra Date: Sun Jun 29 10:06:40 2003 +0000 Convert to C90 and a few tweaks. Remove it and its one use. 2023-02-07 Tom Tromey * doc/proto.str (SYNOPSIS): Don't use paramstuff. * doc/chew.c (paramstuff): Remove. (main): Don't add paramstuff intrinsic. 2023-02-15 Tom Tromey Add copyright headers to the .str files The .str script files don't have copyright headers, but I think they should. I used the same dates that chew.c uses, which I think makes sense because these are inputs to chew. 2023-02-07 Tom Tromey * doc/doc.str, doc/proto.str: Add copyright header. 2023-02-15 Tom Tromey Simplify @node use in BFD documentation The BFD docs currently specify all the parameters to @node. However, this results in bad navigation in certain nodes -- the "space" command in info doesn't know how to find the next node. I think this style of @node is a leftover from ancient times. Makeinfo can figure out the node structure on its own now, so simplify everything to a single-argument @node. 2023-02-07 Tom Tromey * doc/webassembly.texi (File layout): Remove second argument from @node. * doc/bfd.texi: Use single-argument @node everywhere. 2023-02-15 Tom Tromey Remove H_CFLAGS from doc/local.mk I couldn't see that H_CFLAGS is defined anywhere, so remove it. 2023-02-07 Tom Tromey * Makefile.in: Rebuild. * doc/local.mk (%D%/chew.stamp): Don't use H_CFLAGS. 2023-02-15 Simon Marchi gdb: store internalvars in an std::map In a test downstream in ROCgdb, we had a test case failing when GDB_REVERSE_INIT_FUNCTIONS was set. The test was assuming a particular order in the output of "show convenience". And the order changes when running with GDB_REVERSE_INIT_FUNCTIONS. I think that a nice way to fix it is to make the output of "show convenience" sorted, and therefore stable. Ideally, I think that the the user-visible behavior of GDB should not change when using GDB_REVERSE_INIT_FUNCTIONS. Plus, it makes the output of "show convenience" look nice, not that it's really important. Implement this by storing the internal vars in an std::map, which is a sorted container. Change-Id: I1fca7e7877cc984a3a3432c7639d45e68d437241 Approved-By: Tom Tromey 2023-02-15 Simon Marchi gdb: add constructor to internalvar Add a constructor that takes the name as a parameter. Initialize the next and kind fields inline. Change-Id: Ic4db0aba85f1da9f12f3eee0ac62c0e5ef0cfe88 Approved-By: Tom Tromey 2023-02-15 Simon Marchi gdb: use std::string for internalvar::name Change internalvar::name to std::string, automating memory management. It becomes necessary to allocate internalvar with new instead of XNEW. I didn't find how to trigger the code in complete_internalvar. It is called from condition_completer, so it should be by using the "condition" command, but I never managed to get in the right code path. Change-Id: I814d61361663e7becb8f3fb5f58c0180cdc414bc Approved-By: Tom Tromey 2023-02-15 Tom Tromey Do not record a rejected target description When connecting to a certain target, gdb issues a warning about the target description: (gdb) target remote localhost:7947 Remote debugging using localhost:7947 warning: Architecture rejected target-supplied description If you then kill the inferior and change the exec-file, this will happen: (gdb) file bar Architecture of file not recognized. After this, debugging doesn't work very well. What happens here is that, despite the warning, target_find_description records the downloaded description in the target_desc_info. Then the "file" command ends up calling set_gdbarch_from_file, which uses that description. It seems to me that, because the architecture rejected the description, it should not be used. That is what this patch implements. 2023-02-15 Pedro Alves gdb/manual: Move @findex entries The manual currently has many cases like these: @item $_gdb_setting_str (@var{setting}) @findex $_gdb_setting_str@r{, convenience function} As suggested by Eli, move the @findex entries before @item so that the index records the position of @item, and the Info reader places you there when you use index-search. I went over all @findex calls in the manual, and most are like the above. Most either appear before @item, or before @subheading, like: @subheading The @code{-break-after} Command @findex -break-after I fixed all of them. There are findex entries in annotate.texinfo,python.texi, and stabs.texinfo as well, though those all look right to me already. Tested by typing "i _isvoid" (@item case) and "i -complete" (@subheading case) in an Info reader, and checking where those took me. Change-Id: Idb6903b0bb39ff03f93524628dcef86b5585c97e Suggested-By: Eli Zaretskii 2023-02-15 Alan Modra objdump read_section_stabs This function is used to read sections other than stabs, and there is now another version of it that extracts different info from the bfd section. Rename it and return the bfd section instead of assorted fields of the bfd section. * objcopy.c (read_section): Renamed from read_section_stabs. Delete size_ptr and entsize_ptr params, add contents param. Return asection pointer. Don't unnecessarily free contents on failure from bfd_malloc_and_get_section. (find_stabs_section): Use read_section. (dump_ctf, dump_section_sframe): Likewise. (read_section_sframe): Delete. 2023-02-15 Alan Modra objdump -G memory leak * objdump.c (find_stabs_section): Free stabs. 2023-02-15 Nick Clifton Fix the linker's merge4 test for the HPPA architecture. PR 30078 * testsuite/ld-elf/merge4b.s: Use .asciz instead of .string in order to avoid the special behaviour of the .string directive on HPPA architectures. 2023-02-15 Felix Willgerodt gdb, fortran: Fix quad floating-point type for ifort compiler. I fixed this a while ago for ifx, one of the two Intel compilers, in 8d624a9d8050ca96e154215c7858ac5c2d8b0b19. Apparently I missed that the older ifort Intel compiler actually emits slightly different debug info again: 0x0000007a: DW_TAG_base_type DW_AT_byte_size (0x20) DW_AT_encoding (DW_ATE_complex_float) DW_AT_name ("COMPLEX(16)") 0x00000081: DW_TAG_base_type DW_AT_byte_size (0x10) DW_AT_encoding (DW_ATE_float) DW_AT_name ("REAL(16)") This fixes two failures in gdb.fortran/complex.exp with ifort. Approved-By: Tom Tromey 2023-02-15 Jan Beulich gas: buffer_and_nest() needs to pass nul-terminated string to temp_ilp() In 7545aa2dd2eb ("gas: improve interaction between read_a_source_file() and s_linefile()") I didn't pay attention to the dual purpose of the nul character previously used. This was to a fair degree because of the open-coding of certain operations. Insert the earlier found line terminator instead of a hard-coded newline, and do so early in this special case (bypassing the later general insertion point). Plus properly use sb_terminate() to mark the end of the string. (Note that saved_eol_char was misnamed: Without calling sb_terminate() there's simply random data at that position in the buffer.) 2023-02-15 Alan Modra More ecoff sanity checks Change FIX so that unused pointers that escape the UPDATE_RAW_END sanity checks won't result in overflows. Also sanity check the local sym fdr isymBase and csym values. * ecoff.c (_bfd_ecoff_slurp_symbolic_info): Define FIX to set pointers into swapped internal data to NULL if count is zero. Sanity check local sym fdr_ptr->isymBase and fdr_ptr->csym. 2023-02-15 Alan Modra binutils stabs type list Fuzzers have found that specifying a large stab type number results in lots of memory being requested, as the list is extended with a 16 element array at a time until we reach the given stab type. It also takes a long time. Of course normal sane stab types use small positive integers, but it's not hard to modify the code to handle type numbers starting anyhere. * stabs.c (struct stab_types): Add base_index. (stab_find_slot): Simplify filenum check. Delete type number check. Don't allocate entire array from 0 to type number, allocate a sparse array. 2023-02-15 GDB Administrator Automatic date update in version.in 2023-02-14 Tom Tromey Remove a use of pagination_enabled I noticed that the TUI temporarily sets pagination_enabled and gdb_stdout in one spot. However, I don't believe these settings are necessary here, as a ui_file is passed to gdbarch_print_registers_info. This patch removes these settings. 2023-02-14 Simon Marchi gdb/dwarf2: rename some things, index -> gdb_index This renaming helps make it clearer that these entites (classes, functions) are specific to .gdb_index only, they are not shared with the .debug_names handling. Change-Id: I1a3cf3dbf450b62d1a0879d9aedd26397abdfd13 Approved-By: Tom Tromey 2023-02-14 Simon Marchi gdb: cast return value of std::unique_ptr::release to void My editor shows warnings like: value.c:2784: warning: The value returned by this function should be used value.c:2784: note: cast the expression to void to silence this warning [bugprone-unused-return-value] These warnings come from clangd, so ultimately from one of the clang static analyzers (probably clang-tidy). Silence these warnings by casting to void. Add a comment to explain why this unusual thing is done. Change-Id: I58323959c0baf9f1b20a8d596e4c58dc77c6809a Approved-By: Tom Tromey 2023-02-14 Simon Marchi gdb: remove unnecessary tui directory check in configure I suppose this was possible in the CVS days for the tui directory to be missing, but it's not really possible nowaday. Well, a user could delete the directory from their source tree but... it doesn't make sense. Remove the check for that directory in configure. Change-Id: Iea1412f5e5482ed003015030132ec22150c7d0b3 Approved-By: Tom Tromey 2023-02-14 Tom Tromey Do not cast away const in agent_run_command While investigating something else, I noticed some weird code in agent_run_command (use of memcpy rather than strcpy). Then I noticed that 'cmd' is used as both an in and out parameter, despite being const. Casting away const like this is bad. This patch removes the const and fixes the memcpy. I also added a static assert to assure myself that the code in gdbserver is correct -- gdbserver is passing its own buffer directly to agent_run_command. Reviewed-By: Andrew Burgess 2023-02-14 Tom de Vries [gdb/testsuite] Add xfail in gdb.python/py-record-btrace.exp There's a HW bug affecting Processor Trace on some Intel processors (Ice Lake to Raptor Lake microarchitectures). The bug was exposed by linux kernel commit 670638477aed ("perf/x86/intel/pt: Opportunistically use single range output mode"), added in version v5.5.0, and was worked around by commit ce0d998be927 ("perf/x86/intel/pt: Fix sampling using single range output") in version 6.1.0. The bug manifests (on a Performance-core of an i7-1250U, an Alder Lake cpu) in a single test-case: ... (gdb) python insn = r.instruction_history^M warning: Decode error (-20) at instruction 33 (offset = 0x3d6a, \ pc = 0x400501): compressed return without call.^M (gdb) FAIL: gdb.python/py-record-btrace.exp: prepare record: \ python insn = r.instruction_history ... Add a corresponding XFAIL. Note that the i7-1250U has both Performance-cores and Efficient-cores, and on an Efficient-Core the test-case runs without any problems, so if the testsuite run is not pinned to a specific cpu, the test may either PASS or XFAIL. Tested on x86_64-linux: - openSUSE Leap 15.4 with linux kernel version 5.14.21 - openSUSE Tumbleweed with linux kernel version 6.1.8 PR testsuite/30075 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30075 2023-02-14 Nick Clifton Mention that the -plugin command line option is used to load plugins. 2023-02-14 Tom de Vries [gdb/testsuite] Factor out proc linux_kernel_version Factor out new proc linux_kernel_version from test-case gdb.arch/i386-pkru.exp. Tested on x86_64-linux. 2023-02-14 Ulf Samuelsson ASCIZ Command for output section Adds a new directive to the linker script syntax: ASCIZ. This inserts a zero-terminated string into the output at the place where it is used. 2023-02-14 Jan Beulich gas: correct symbol name comparison in .startof./.sizeof. handling In 162c6aef1f3a ("gas: fold symbol table entries generated for .startof.() / .sizeof.()") I screwed up quite badly, inverting the case sensitive and case insensitive comparison functions. x86: {LD,ST}TILECFG use an extension opcode It being zero and happening to work right now doesn't mean the insns shouldn't be spelled out properly. 2023-02-14 Jan Beulich gas: improve interaction between read_a_source_file() and s_linefile() read_a_source_file() would bump line numbers only when seeing a newline, whereas is_end_of_line[] indicates further end-of-line characters, in particular the nul character. s_linefile() attempts to compensate for the bump, but was too aggressive with this so far: It should only adjust when a newline ends the line. To facilitate such a check, the check for nothing else on the line needs to move ahead, which luckily is easily possible: The relevant two conditions match, and the function can simply return from the body of that earlier instance of the conditional. The more strict treatment in s_linefile() then requires an adjustment to buffer_and_nest()'s invocation of the function: The line terminator now needs to be a newline, not nul. 2023-02-14 Tom Tromey Fix build bug in ppc-linux-nat.c The buildbot pointed out that my value refactoring series introduced a bug in ppc-linux-nat.c: ../../binutils-gdb/gdb/ppc-linux-nat.c: In member function ‘int ppc_linux_nat_target::num_memory_accesses(const std::vector >&)’: ../../binutils-gdb/gdb/ppc-linux-nat.c:2458:44: error: expected unqualified-id before ‘->’ token 2458 | if (VALUE_LVAL (v) == not_lval || v->->deprecated_modifiable () == 0) I don't know how that happened, but I am checking in this patch which I think should fix it. It just removes the second "->". I can't readily test this, so perhaps there's another bug lurking after this one. 2023-02-14 GDB Administrator Automatic date update in version.in 2023-02-13 Tom Tromey Rely on value_ref_ptr::operator-> Simon pointed out some spots were doing val.get()->mumble, where val is a value_ref_ptr. These were introduced by the function-to-method script, replacing older code that passed the result of .get() to a function. Now that value.h is using methods, we can instead rely on operator->. This patch replaces all the newly-introduced instances of this. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Remove deprecated_lval_hack This removes deprecated_lval_hack and the VALUE_LVAL macro, replacing all uses with a call to value::lval. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Introduce set_lval method on value This introduces the set_lval method on value, one step toward removing deprecated_lval_hack. Ultimately I think the goal should be for some of these set_* methods to be replaced with constructors; but I haven't done this, as the series is already too long. Other 'deprecated' methods can probably be handled the same way. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Make ~value private At the end of this series, I belatedly realized that values should only be destroyed by value_decref. This patch marks the the destructor private to enforce this. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Make struct value data members private This hoists the 'private' in struct value to also encompass the data members. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn record_latest_value into a method record_latest_value now access some internals of struct value, so turn it into a method. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Add value::set_modifiable This introduces a value::set_modifiable and changes a couple of spots to use it. I'm not completely sure the comments by deprecated_modifiable are correct any more. Perhaps they should be removed and the method renamed. Like so many before me, though, I've deferred investigation of the issue. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn various value copying-related functions into methods This patch turns a grab bag of value functions to methods of value. These are done together because their implementations are interrelated. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn preserve_one_value into method This changes preserve_one_value to be a method of value. Much of this patch was written by script. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn some xmethod functions into methods This turns value_from_xmethod, result_type_of_xmethod, and call_xmethod to be methods of value. value_from_xmethod is a static "constructor" now. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Change some code to use value methods A few functions in value.c were accessing the internal fields of struct value. However, in these cases it seemed simpler to change them to use the public API rather than convert them to be methods. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn set_value_component_location into method This turns set_value_component_location into a method of value. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn value_non_lval and value_force_lval into methods This changes value_non_lval and value_force_lval to be methods of value. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn many optimized-out value functions into methods This turns many functions that are related to optimized-out or availability-checking to be methods of value. The static function value_entirely_covered_by_range_vector is also converted to be a private method. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn value_copy into a method This turns value_copy into a method of value. Much of this was written by script. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Fully qualify calls to copy in value.c A coming patch will add value::copy, so this namespace-qualifies existing calls to 'copy' in value.c, to ensure it will still compile after that change is done. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn remaining value_contents functions into methods This turns the remaining value_contents functions -- value_contents, value_contents_all, value_contents_for_printing, and value_contents_for_printing_const -- into methods of value. It also converts the static functions require_not_optimized_out and require_available to be private methods. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn value_incref and value_decref into methods This changes value_incref and value_decref to be methods of value. Much of this patch was written by script. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Move value_ref_policy methods out-of-line This moves the value_ref_policy methods to be defined out-of-line. This is a necessary step to change value_incref and value_decref to be methods of value. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn value_bits_synthetic_pointer into a method This changes value_bits_synthetic_pointer to be a method of value. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn value_contents_eq into a method This changes value_contents_eq to be a method of value. It also converts the static function value_contents_bits_eq into a private method. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn allocate_value_contents into a method This turns the static function allocate_value_contents into a method on value. It is temporarily public, until some users are converted. set_limited_array_length is converted as well. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn value_fetch_lazy into a method This changes value_fetch_lazy to be a method of value. A few helper functions are converted as well, to avoid problems in later patches when the data members are all made private. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn some value_contents functions into methods This turns value_contents_raw, value_contents_writeable, and value_contents_all_raw into methods on value. The remaining functions will be changed later in the series; they were a bit trickier and so I didn't include them in this patch. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn value_zero into static "constructor" This turns value_zero into a static "constructor" of value. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn allocate_optimized_out_value into static "constructor" This turns allocate_optimized_out_value into a static "constructor" of value. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn allocate_computed_value into static "constructor" This turns allocate_computed_value into a static "constructor" of value. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn allocate_value into a static "constructor" This changes allocate_value to be a static "constructor" of value. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn allocate_value_lazy into a static "constructor" This changes allocate_value_lazy to be a static "constructor" of struct value. I considered trying to change value to use ordinary new/delete, but it seems to me that due to reference counting, we may someday want to change these static constructors to return value_ref_ptr instead. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn more deprecated_* functions into methods This changes deprecated_value_internalvar_hack, deprecated_value_internalvar_hack, and deprecated_value_regnum_hack into methods on value. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn value_address and set_value_address functions into methods This changes the value_address and set_value_address functions to be methods of value. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn value_initialized and set_value_initialized functions into methods This changes the value_initialized and set_value_initialized functions to be methods of value. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Convert value_lval_const and deprecated_lval_hack to methods This converts the value_lval_const and deprecated_lval_hack functions to be methods on value. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn value_computed_closure and value_computed_funcs functions into methods This changes the value_computed_funcs and value_computed_closure functions to be methods of value. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn value_stack and set_value_stack functions into methods This changes the value_stack and set_value_stack functions to be methods of value. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn value_lazy and set_value_lazy functions into methods This changes the value_lazy and set_value_lazy functions to be methods of value. Much of this patch was written by script. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn some value offset functions into method This changes various offset-related functions to be methods of value. Much of this patch was written by script. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn value_enclosing_type into method This changes value_enclosing_type to be a method of value. Much of this patch was written by script. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn deprecated_value_modifiable into method This changes deprecated_value_modifiable to be a method of value. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn value_offset into method This changes value_offset to be a method of value. Much of this patch was written by script. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn value_parent into method This changes value_parent to be a method of value. Much of this patch was written by script. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn value_bitpos into method This changes value_bitpos to be a method of value. Much of this patch was written by script. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn value_bitsize into method This changes value_bitsize to be a method of value. Much of this patch was written by script. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn value_arch into method This changes value_arch to be a method of value. Much of this patch was written by script. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn deprecated_set_value_type into a method This changes deprecated_set_value_type to be a method of value. Much of this patch was written by script. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Turn value_type into method This changes value_type to be a method of value. Much of this patch was written by script. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Move struct value to value.h This moves struct value to value.h. For now, all members remain public, but this is a temporary state -- by the end of the series we'll add 'private'. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Move ~value body out-of-line struct value is going to move to value.h, but to avoid having excessive code there, first move the destructor body out-of-line. Approved-By: Simon Marchi 2023-02-13 Tom Tromey Rename all fields of struct value This renames all the fields of struct value, in preparation for the coming changes. Approved-By: Simon Marchi 2023-02-13 Michael Matz PR30120: fix x87 fucomp misassembled this fixes the entry for 'fucomp' to use the correct Reg value (otherwise it's assembled as 'fucom'). 2023-02-13 Tom Tromey Remove unused imports from gdb's Python code The "sys" import is unused in several Python files. This removes this line from all the places where it is unnecessary. 2023-02-13 Andrew Burgess gdb/tui: don't leak the known_window_types map This commit finishes the task that was started in the previous commit. Now that all Python TUI window factories are correctly deleted when the Python interpreter is shut down, we no longer need to dynamically allocate the known_window_types map in tui-layout.c This commit changes known_window_types to a statically allocated data structure, removes the dynamic allocation from initialize_known_windows, and then replaces lots of '->' with '.' throughout this file. There should be no user visible changes after this commit. Reviewed-By: Tom Tromey 2023-02-13 Andrew Burgess gdb/python: deallocate tui window factories at Python shut down The previous commit relied on spotting when a Python defined TUI window factory was deleted. I spotted that the window factories are not deleted when GDB shuts down its Python environment, they are only deleted when one window factory replaces another. Consider this example Python script: class TestWindowFactory: def __init__(self, msg): self.msg = msg print("Entering TestWindowFactory.__init__: %s" % self.msg) def __call__(self, tui_win): print("Entering TestWindowFactory.__call__: %s" % self.msg) return TestWindow(tui_win, self.msg) def __del__(self): print("Entering TestWindowFactory.__del__: %s" % self.msg) gdb.register_window_type("test_window", TestWindowFactory("A")) gdb.register_window_type("test_window", TestWindowFactory("B")) And this GDB session: (gdb) source tui.py Entering TestWindowFactory.__init__: A Entering TestWindowFactory.__init__: B Entering TestWindowFactory.__del__: B (gdb) quit Notice that when the 'B' window replaces the 'A' window we see the 'A' object being deleted. But, when Python is shut down (after the 'quit') the 'B' object is never deleted. Instead, GDB retains a reference to the window factory object, which forces the Python object to remain live even after the Python interpreter itself has been shut down. The references themselves are held in a dynamically allocated std::unordered_map (in tui/tui-layout.c) which is never deallocated, thus the underlying Python references are never decremented to zero, and so GDB never tries to delete these Python objects. This commit is the first half of the work to clean up this edge case. All gdbpy_tui_window_maker objects (the objects that implement the TUI window factory callback for Python defined TUI windows), are now linked together into a global list using the intrusive list mechanism. When GDB shuts down the Python interpreter we can now walk this global list and release the reference that is held to the underlying Python object. By releasing this reference the Python object will now be deleted. I've added a new assert in gdbpy_tui_window_maker::operator(), this will catch the case where we somehow end up in here after having reset the reference to the underlying Python object. I don't think this should ever happen though as we only clear the references when shutting down the Python interpreter, and the ::operator() function is only called when trying to apply a new TUI layout - something that shouldn't happen while GDB itself is shutting down. This commit does not update the std::unordered_map in tui-layout.c, that will be done in the next commit. Reviewed-By: Tom Tromey 2023-02-13 Andrew Burgess gdb/python: allow Python TUI windows to be replaced The documentation for gdb.register_window_type says: "... It's an error to try to replace one of the built-in windows, but other window types can be replaced. ..." I take this to mean that if I imported a Python script like this: gdb.register_window_type('my_window', FactoryFunction) Then GDB would have a new TUI window 'my_window', which could be created by calling FactoryFunction(). If I then, in the same GDB session imported a script which included: gdb.register_window_type('my_window', UpdatedFactoryFunction) Then GDB would replace the old 'my_window' factory with my new one, GDB would now call UpdatedFactoryFunction(). This is pretty useful in practice, as it allows users to iterate on their window implementation within a single GDB session. However, right now, this is not how GDB operates. The second call to register_window_type is basically ignored and the old window factory is retained. This is because in tui_register_window (tui/tui-layout.c) we use std::unordered_map::emplace to insert the new factory function, and emplace doesn't replace an existing element in an unordered_map. In this commit, before the emplace call, I now search for an already existing element, and delete any matching element from the map, the emplace call will then add the new factory function. Reviewed-By: Tom Tromey 2023-02-13 Keith Seitz Fix doc build dependencies for --with-system-readline PR build/30108 concerns building gdb documentation with --with-sytem-readline. If the in-tree readline directory is missing, though, the docs will fail to build: make[4]: Entering directory '/home/keiths/work/readline-doc-issue/linux/gdb/doc' make[4]: *** No rule to make target '../../../src/gdb/doc/../../readline/readline/doc/rluser.texi', needed by 'gdb.info'. Stop. The listed file (and hsuser.texi) are conditionally included by gdb.texinfo. When system readline is used, gdb/configure.ac will leave READLINE_TEXI_INCFLAGS empty, causing doc/Makefile.in to output a line to $BUILD/doc/GDBvn.texi with "@set SYSTEM_READLINE". This surpresses the inclusion of the missing files. They are not needed or used in this scenario. However, GDB_DOC_SOURCE_INCLUDES always lists these two files as dependencies, thus provoking the build error whenever readline/ is missing. This patch fixes this by creating (essentially) a conditional setting of the dependencies to be included from readline. 2023-02-13 Michael Matz Fix PR30079: abort on mingw the early-out in wild_sort is not enough, it might still be that filenames are equal _and_ the wildcard list doesn't specify a sort order either. Don't call compare_section then. Tested on all targets. 2023-02-13 Alan Modra _bfd_ecoff_slurp_symbol_table buffer overflow Add missing bounds check, and tidy the existing bounds checking. * ecoff.c (_bfd_ecoff_slurp_symbol_table): Break overlong lines. Set bfd_error. Bounds check internal_sym.iss. 2023-02-13 Andrew Burgess opcodes/mips: disassemble unknown micromips instructions as two shorts Before commit: commit 2438b771ee07be19d5b01ea55e077dd8b7cef445 Date: Wed Nov 2 15:53:43 2022 +0000 opcodes/mips: use .word/.short for undefined instructions unknown 32-bit microMIPS instructions were disassembled as a raw 32-bit number with no '.word' directive. The above commit changed this and added a '.word' directive before the 32-bit number. It was pointed out on the mailing list, that for microMIPS it would be better to display such 32-bit instructions using a '.short' directive followed by two 16-bit values. This commit updates the mips disassembler to do this, and adds a new test that validates this output. 2023-02-13 Andrew Burgess gdb/testsuite: handle differences in guile error string output A new guile test added in commit: commit 0a9ccb9dd79384f3ba3f8cd75940e8868f3b526f Date: Mon Feb 6 13:04:16 2023 +0000 gdb: only allow one of thread or task on breakpoints or watchpoints fails for some versions of guile. It turns out that some versions of guile emit an error like this: (gdb) guile (set-breakpoint-thread! bp 1) ERROR: In procedure set-breakpoint-thread!: In procedure gdbscm_set_breakpoint_thread_x: cannot set both task and thread attributes Error while executing Scheme code. while other versions of guile emit the error like this: (gdb) guile (set-breakpoint-thread! bp 1) ERROR: In procedure set-breakpoint-thread!: ERROR: In procedure gdbscm_set_breakpoint_thread_x: cannot set both task and thread attributes Error while executing Scheme code. notice the extra 'ERROR: ' on the second line of output. This commit updates the test regexp to handle this optional 'ERROR: ' string. 2023-02-13 Alan Modra stabs.c static state Move all the function local static state variables to file scope, in order to tidy memory on exit and to reinit everything for that annoying oss-fuzz. Also fix a couple memory leaks. * read.h (read_begin, read_end): Declare. * read.c (read_begin): Call stabs_begin. (read_end): Call stabs_end. * stabs.c (stabs_begin, stabs_end): New functions. (in_dot_func_p): Delete, use current_function_label instead. (cached_sec): Move from s_stab_generic. (last_asm_file, file_label_count): Move from generate_asm_file. (line_label_count, prev_lineno, prev_line_file): Move from stabs_generate_asm_lineno. (void_emitted_p): Move from stabs_generate_asm_func. (endfunc_label_count): Move from stabs_generate_asm_endfunc. (stabs_generate_asm_lineno): Simplify setting of prev_line_file. (stabs_generate_asm_func): Don't leak current_function_label. (stabs_generate_asm_endfunc): Likewise. 2023-02-13 Alan Modra Split off gas init to functions With some slight reordering. * as.c (gas_early_init, gas_late_init): New functions, split.. (main): ..from here. 2023-02-13 Lancelot SIX gdb/testsuite: look for hipcc in env(ROCM_PATH) If the hipcc compiler cannot be found in dejagnu's tool_root_dir, look for it in $::env(ROCM_PATH) (if set). If hipcc is still not found, fallback to "hipcc" so the compiler will be searched in the PATH. This removes the fallback to the hard-coded "/opt/rocm/bin" prefix. This change is done so ROCM tools are searched in a uniform manner. Approved-By: Simon Marchi 2023-02-13 Lancelot SIX gdb/testsuite: allow_hipcc_tests tests the hipcc compiler Update allow_hipcc_tests so all gdb.rocm tests are skipped if we do not have a working hipcc compiler available. To achieve this, adjust gdb_simple_compile to ensure that the hip program is saved in a ".cpp" file before calling hipcc otherwise compilation will fail. One thing to note is that it is possible to have a hipcc installed with a CUDA backend. Compiling with this back-end will successfully result in an application, but GDB cannot debug it (at least for the offload part). In the context of the gdb.rocm tests, we want to detect such situation where gdb_simple_compile would give a false positive. To achieve this, this patch checks that there is at least one AMDGPU device available and that hipcc can compile for this or those targets. Detecting the device is done using the rocm_agent_enumerator tool which is installed with the all ROCm installations (it is used by hipcc to detect identify targets if this is not specified on the comand line). This patch also makes the allow_hipcc_tests proc a cached proc. Co-Authored-By: Pedro Alves Approved-By: Simon Marchi 2023-02-13 Lancelot SIX gdb/testsuite: require amd-dbgapi support to run rocm tests Update allow_hipcc_tests to check that GDB has the amd-dbgapi support built-in. Without this support, all tests using hipcc and the rocm stack will fail. Approved-By: Simon Marchi 2023-02-13 Lancelot SIX gdb/testsuite: Rename skip_hipcc_tests to allow_hipcc_tests Rename skip_hipcc_tests to allow_hipcc_tests so it can be used as a "require" predicate in tests. Use require in gdb.rocm/simple.exp. Approved-By: Simon Marchi 2023-02-13 Lancelot SIX gdb: 'show config' shows --with[out]-amd-dbgapi Ensure that the "show configuration" command and the "--configuration" command line switch shows if GDB was built with the AMDGPU support or not. This will be used in a later patch in this series. Approved-By: Simon Marchi 2023-02-13 Alan Modra objcopy memory leaks This fixes some objcopy memory leaks. commit 450da4bd38ae used xatexit to tidy most of the hash table memory, but of course that's ineffective without a call to xexit. The other major memory leak happens if there is an error of some sort writing the output file, due to not closing the input file and thus not freeing memory attached to the bfd. * objcopy.c (copy_file): Don't return when bfd_close of output gives an error, always bfd_close input too. (main): Call xexit. 2023-02-13 GDB Administrator Automatic date update in version.in 2023-02-12 Tom Tromey Move some code from dwarf2/read.c to die.c This patch introduces a new file, dwarf2/die.c, and moves some DIE-related code out of dwarf2/read.c and into this new file. This is just a small part of the long-term project to split up read.c. (According to 'wc', dwarf2/read.c is the largest file in gdb by around 8000 LOC.) Regression tested on x86-64 Fedora 36. 2023-02-12 Andrew Burgess gdb: fix describe_other_breakpoints for default task being -1 Commit: commit 2ecee236752932672fb3d6cd63c6976927f747d8 CommitDate: Sun Feb 12 05:46:44 2023 +0000 gdb: use -1 for breakpoint::task default value Failed to take account of an earlier commit: commit f1f517e81039f6aa673b7d87a66bfbd25a66e3d3 CommitDate: Sat Feb 11 17:36:24 2023 +0000 gdb: show task number in describe_other_breakpoints That both of these are my own commits is only more embarrassing. This small fix updates describe_other_breakpoints to take account of the default task number now being -1. This fixes regressions in gdb.base/break.exp, gdb.base/break-always.exp, and many other tests. 2023-02-12 Andrew Burgess gdb/c++: fix handling of breakpoints on @plt symbols This commit should fix PR gdb/20091, PR gdb/17201, and PR gdb/17071. Additionally, PR gdb/17199 relates to this area of code, but is more of a request to refactor some parts of GDB, this commit does not address that request, but it is probably worth reading that PR when looking at this commit. When the current language is C++, and the user places a breakpoint on a function in a shared library, GDB will currently find two locations for the breakpoint, one location will be within the function itself as we would expect, but the other location will be within the PLT table for the call to the named function. Consider this session: $ gdb -q /tmp/breakpoint-shlib-func Reading symbols from /tmp/breakpoint-shlib-func... (gdb) start Temporary breakpoint 1 at 0x40112e: file /tmp/breakpoint-shlib-func.cc, line 20. Starting program: /tmp/breakpoint-shlib-func Temporary breakpoint 1, main () at /tmp/breakpoint-shlib-func.cc:20 20 int answer = foo (); (gdb) break foo Breakpoint 2 at 0x401030 (2 locations) (gdb) info breakpoints Num Type Disp Enb Address What 2 breakpoint keep y 2.1 y 0x0000000000401030 2.2 y 0x00007ffff7fc50fd in foo() at /tmp/breakpoint-shlib-func-lib.cc:20 This is not the expected behaviour. If we compile the same test using a C compiler then we see this: (gdb) break foo Breakpoint 2 at 0x7ffff7fc50fd: file /tmp/breakpoint-shlib-func-c-lib.c, line 20. (gdb) info breakpoints Num Type Disp Enb Address What 2 breakpoint keep y 0x00007ffff7fc50fd in foo at /tmp/breakpoint-shlib-func-c-lib.c:20 Here's what's happening. When GDB parses the symbols in the main executable and the shared library we see a number of different symbols for foo, and use these to create entries in GDB's msymbol table: - In the main executable we see a symbol 'foo@plt' that points at the plt entry for foo, from this we add two entries into GDB's msymbol table, one called 'foo@plt' which points at the plt entry and has type mst_text, then we create a second symbol, this time called 'foo' with type mst_solib_trampoline which also points at the plt entry, - Then, when the shared library is loaded we see another symbol called 'foo', this one points at the actual implementation in the shared library. This time GDB creates a msymbol called 'foo' with type mst_text that points at the implementation. This means that GDB creates 3 msymbols to represent the 2 symbols found in the executable and shared library. When the user creates a breakpoint on 'foo' GDB eventually ends up in search_minsyms_for_name (linespec.c), this function then calls iterate_over_minimal_symbols passing in the name we are looking for wrapped in a lookup_name_info object. In iterate_over_minimal_symbols we iterate over two hash tables (using the name we're looking for as the hash key), first we walk the hash table of symbol linkage names, then we walk the hash table of demangled symbol names. When the language is C++ the symbols for 'foo' will all have been mangled, as a result, in this case, the iteration of the linkage name hash table will find no matching results. However, when we walk the demangled hash table we do find some results. In order to match symbol names, GDB obtains a symbol name matching function by calling the get_symbol_name_matcher method on the language_defn class. For C++, in this case, the matching function we use is cp_fq_symbol_name_matches, which delegates the work to strncmp_iw_with_mode with mode strncmp_iw_mode::MATCH_PARAMS and language set to language_cplus. The strncmp_iw_mode::MATCH_PARAMS mode means that strncmp_iw_mode will skip any parameters in the demangled symbol name when checking for a match, e.g. 'foo' will match the demangled name 'foo()'. The way this is done is that the strings are matched character by character, but, once the string we are looking for ('foo' here) is exhausted, if we are looking at '(' then we consider the match a success. Lets consider the 3 symbols GDB created. If the function declaration is 'void foo ()' then from the main executable we added symbols '_Z3foov@plt' and '_Z3foov', while from the shared library we added another symbol call '_Z3foov'. When these are demangled they become 'foo()@plt', 'foo()', and 'foo()' respectively. Now, the '_Z3foov' symbol from the main executable has the type mst_solib_trampoline, and in search_minsyms_for_name, we search for any symbols of type mst_solib_trampoline and filter these out of the results. However, the '_Z3foov@plt' symbol (from the main executable), and the '_Z3foov' symbol (from the shared library) both have type mst_text. During the demangled name matching, due to the use of MATCH_PARAMS mode, we stop the comparison as soon as we hit a '(' in the demangled name. And so, '_Z3foov@plt', which demangles to 'foo()@plt' matches 'foo', and '_Z3foov', which demangles to 'foo()' also matches 'foo'. By contrast, for C, there are no demangled hash table entries to be iterated over (in iterate_over_minimal_symbols), we only consider the linkage name symbols which are 'foo@plt' and 'foo'. The plain 'foo' symbol obviously matches when we are looking for 'foo', but in this case the 'foo@plt' will not match due to the '@plt' suffix. And so, when the user asks for a breakpoint in 'foo', and the language is C, search_minsyms_for_name, returns a single msymbol, the mst_text symbol for foo in the shared library, while, when the language is C++, we get two results, '_Z3foov' for the shared library function, and '_Z3foov@plt' for the plt entry in the main executable. I propose to fix this in strncmp_iw_with_mode. When the mode is MATCH_PARAMS, instead of stopping at a '(' and assuming the match is a success, GDB will instead search forward for the matching, closing, ')', effectively skipping the parameter list, and then resume matching. Thus, when comparing 'foo' to 'foo()@plt' GDB will effectively compare against 'foo@plt' (skipping the parameter list), and the match will fail, just as it does when the language is C. There is one slight complication, which is revealed by the test gdb.linespec/cpcompletion.exp, when searching for the symbol of a const member function, the demangled symbol will have 'const' at the end of its name, e.g.: struct_with_const_overload::const_overload_fn() const Previously, the matching would stop at the '(' character, but after my change the whole '()' is skipped, and the match resumes. As a result, the 'const' modifier results in a failure to match, when previously GDB would have found a match. To work around this issue, in strncmp_iw_with_mode, when mode is MATCH_PARAMS, after skipping the parameter list, if the next character is '@' then we assume we are looking at something like '@plt' and return a value indicating the match failed, otherwise, we return a value indicating the match succeeded, this allows things like 'const' to be skipped. With these changes in place I now see GDB correctly setting a breakpoint only at the implementation of 'foo' in the shared library. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=20091 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17201 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17071 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17199 Tested-By: Bruno Larsen Approved-By: Simon Marchi 2023-02-12 Andrew Burgess gdb: use -1 for breakpoint::task default value Within the breakpoint struct we have two fields ::thread and ::task which are used for thread or task specific breakpoints. When a breakpoint doesn't have a specific thread or task then these fields have the values -1 and 0 respectively. There's no particular reason (as far as I can tell) why these two "default" values are different, and I find the difference a little confusing. Long term I'd like to potentially fold these two fields into a single field, but that isn't what this commit does. What this commit does is switch to using -1 as the "default" value for both fields, this means that the default for breakpoint::task has changed from 0 to -1. I've updated all the code I can find that relied on the value of 0, and I see no test regressions, especially in gdb.ada/tasks.exp, which still fully passes. There should be no user visible changes after this commit. Approved-By: Pedro Alves 2023-02-12 Andrew Burgess gdb: only allow one of thread or task on breakpoints or watchpoints After this mailing list posting: https://sourceware.org/pipermail/gdb-patches/2023-February/196607.html it seems to me that in practice an Ada task maps 1:1 with a GDB thread, and so it doesn't really make sense to allow uses to give both a thread and a task within a single breakpoint or watchpoint condition. This commit updates GDB so that the user will get an error if both are specified. I've added new tests to cover the CLI as well as the Python and Guile APIs. For the Python and Guile testing, as far as I can tell, this was the first testing for this corner of the APIs, so I ended up adding more than just a single test. For documentation I've added a NEWS entry, but I've not added anything to the docs themselves. Currently we document the commands with a thread-id or task-id as distinct command, e.g.: 'break LOCSPEC task TASKNO' 'break LOCSPEC task TASKNO if ...' 'break LOCSPEC thread THREAD-ID' 'break LOCSPEC thread THREAD-ID if ...' As such, I don't believe there is any indication that combining 'task' and 'thread' would be expected to work; it seems clear to me in the above that those four options are all distinct commands. I think the NEWS entry is enough that if someone is combining these keywords (it's not clear what the expected behaviour would be in this case) then they can figure out that this was a deliberate change in GDB, but for a new user, the manual doesn't suggest combining them is OK, and any future attempt to combine them will give an error. Approved-By: Pedro Alves 2023-02-12 GDB Administrator Automatic date update in version.in 2023-02-11 Andrew Burgess gdb: show task number in describe_other_breakpoints I noticed that describe_other_breakpoints doesn't show the task number, but does show the thread-id. I can't see any reason why we'd want to not show the task number in this situation, so this commit adds this missing information, and extends gdb.ada/tasks.exp to check this case. Approved-By: Pedro Alves 2023-02-11 Andrew Burgess gdb: don't print global thread-id to CLI in describe_other_breakpoints I noticed that describe_other_breakpoints was printing the global thread-id to the CLI. For CLI output we should be printing the inferior local thread-id (e.g. "2.1"). This can be seen in the following GDB session: (gdb) info threads Id Target Id Frame 1.1 Thread 4065742.4065742 "bp-thread-speci" main () at /tmp/bp-thread-specific.c:27 * 2.1 Thread 4065743.4065743 "bp-thread-speci" main () at /tmp/bp-thread-specific.c:27 (gdb) break foo thread 2.1 Breakpoint 3 at 0x40110a: foo. (2 locations) (gdb) break foo thread 1.1 Note: breakpoint 3 (thread 2) also set at pc 0x40110a. Note: breakpoint 3 (thread 2) also set at pc 0x40110a. Breakpoint 4 at 0x40110a: foo. (2 locations) Notice that GDB says: Note: breakpoint 3 (thread 2) also set at pc 0x40110a. The 'thread 2' in here is using the global thread-id, we should instead say 'thread 2.1' which corresponds to how the user specified the breakpoint. This commit fixes this issue and adds a test. Approved-By: Pedro Alves 2023-02-11 Andrew Burgess gdb: add test for readline handling very long commands The test added in this commit tests for a long fixed readline issue relating to long command lines. A similar patch has existed in the Fedora GDB tree for several years, but I don't see any reason why this test would not be suitable for inclusion in upstream GDB. I've updated the patch to current testsuite standards. The test is checking for an issue that was fixed by this readline patch: https://lists.gnu.org/archive/html/bug-readline/2006-11/msg00002.html Which was merged into readline 6.0 (released ~2010). The issue was triggered when the user enters a long command line, which wrapped over multiple terminal lines. The crash looks like this: free(): invalid pointer Fatal signal: Aborted ----- Backtrace ----- 0x4fb583 gdb_internal_backtrace_1 ../../src/gdb/bt-utils.c:122 0x4fb583 _Z22gdb_internal_backtracev ../../src/gdb/bt-utils.c:168 0x6047b9 handle_fatal_signal ../../src/gdb/event-top.c:964 0x7f26e0cc56af ??? 0x7f26e0cc5625 ??? 0x7f26e0cae8d8 ??? 0x7f26e0d094be ??? 0x7f26e0d10aab ??? 0x7f26e0d124ab ??? 0x7f26e1d32e12 rl_free_undo_list ../../readline-5.2/undo.c:119 0x7f26e1d229eb readline_internal_teardown ../../readline-5.2/readline.c:405 0x7f26e1d3425f rl_callback_read_char ../../readline-5.2/callback.c:197 0x604c0d gdb_rl_callback_read_char_wrapper_noexcept ../../src/gdb/event-top.c:192 0x60581d gdb_rl_callback_read_char_wrapper ../../src/gdb/event-top.c:225 0x60492f stdin_event_handler ../../src/gdb/event-top.c:545 0xa60015 gdb_wait_for_event ../../src/gdbsupport/event-loop.cc:694 0xa6078d gdb_wait_for_event ../../src/gdbsupport/event-loop.cc:593 0xa6078d _Z16gdb_do_one_eventi ../../src/gdbsupport/event-loop.cc:264 0x6fc459 start_event_loop ../../src/gdb/main.c:411 0x6fc459 captured_command_loop ../../src/gdb/main.c:471 0x6fdce4 captured_main ../../src/gdb/main.c:1310 0x6fdce4 _Z8gdb_mainP18captured_main_args ../../src/gdb/main.c:1325 0x44f694 main ../../src/gdb/gdb.c:32 --------------------- I recreated the above crash by a little light hacking on GDB, and then linking GDB against readline 5.2. The above stack trace was generated from the test included in this patch, and matches the trace that was included in the original bug report. It is worth acknowledging that without hacking things GDB has a minimum requirement of readline 7.0. This test is not about checking whether GDB has been built against an older version of readline, it is about checking that readline doesn't regress in this area. Reviewed-By: Tom Tromey 2023-02-11 Andrew Burgess gdb: remove unnecessary 'dir' commands from gdb-gdb.gdb script While debugging GDB I used 'show directories' and spotted lots of entries that didn't make much sense. Here are all the entries that are in my directories list: /tmp/binutils-gdb/build /tmp/binutils-gdb/build/../../src/gdb /tmp/binutils-gdb/build/../../src/gdb/../bfd /tmp/binutils-gdb/build/../../src/gdb/../libiberty $cdir $cwd Notice the second, third, and fourth entries in this list, these should really be: /tmp/binutils-gdb/build/../src/gdb /tmp/binutils-gdb/build/../src/gdb/../bfd /tmp/binutils-gdb/build/../src/gdb/../libiberty The problem is because I generally run everything from the top level build directory, not the gdb/ sub-directory, thus, I start GDB like: ./gdb/gdb --data-directory ./gdb/data-directory If run GDB under GDB, then I end up loading the gdb/gdb-gdb.gdb script, which contains these lines: dir ../../src/gdb/../libiberty dir ../../src/gdb/../bfd dir ../../src/gdb dir . These commands only make sense when running within the gdb/ sub-directory. However, my debugging experience doesn't seem to be degraded at all, I can still see the GDB source code just fine; which is because the directory list still contains $cdir. The build/gdb/gdb-gdb.gdb script is created from the src/gdb/gdb-gdb.gdb.in template, which includes the automake @srcdir@ markers. The 'dir' commands have mostly been around since the sourceware repository was first created, though this commit 67f0714670383a did reorder some of the 'dir' commands, which would seem to indicate these commands were important to some people, at some time. One possible fix would be to replace @srcdir@ with @abs_srcdir@, this would ensure that the entries added were all valid, no matter the user's current directory when debugging GDB. However... I'd like to propose that we instead remove all the extra directories completely. My hope is that, with more recent tools, the debug information should allow us to correctly find all of the source files without having to add any extra 'dir' entries. Obviously, commit 67f0714670383a does make me a little nervous, but the gdb-gdb.gdb script isn't something a non-maintainer will be using, so I think we can afford to be a little more aggressive here. If it turns out the 'dir' entries are needed then we can add them back, but actually document why they are needed. Plus, when we add them back we will use @abs_srcdir@ instead of @srcdir@. Reviewed-By: Tom Tromey 2023-02-11 Tom de Vries [gdb/tdep] Don't use i386 unwinder for amd64 For i386 we have these unwinders: ... $ gdb -q -batch -ex "set arch i386" -ex "maint info frame-unwinders" The target architecture is set to "i386". dummy DUMMY_FRAME dwarf2 tailcall TAILCALL_FRAME inline INLINE_FRAME i386 epilogue NORMAL_FRAME dwarf2 NORMAL_FRAME dwarf2 signal SIGTRAMP_FRAME i386 stack tramp NORMAL_FRAME i386 sigtramp SIGTRAMP_FRAME i386 prologue NORMAL_FRAME ... and for amd64: ... $ gdb -q -batch -ex "set arch i386:x86-64" -ex "maint info frame-unwinders" The target architecture is set to "i386:x86-64". dummy DUMMY_FRAME dwarf2 tailcall TAILCALL_FRAME inline INLINE_FRAME python NORMAL_FRAME amd64 epilogue NORMAL_FRAME i386 epilogue NORMAL_FRAME dwarf2 NORMAL_FRAME dwarf2 signal SIGTRAMP_FRAME amd64 sigtramp SIGTRAMP_FRAME amd64 prologue NORMAL_FRAME i386 stack tramp NORMAL_FRAME i386 sigtramp SIGTRAMP_FRAME i386 prologue NORMAL_FRAME ... ISTM me there's no reason for the i386 unwinders to be there for amd64. Furthermore, there's a generic need to play around with enabling and disabling unwinders, see PR8434. Currently, that's only available for both the dwarf2 unwinders at once using "maint set dwarf unwinders on/off". If I manually disable the "amd64 epilogue" unwinder, the "i386 epilogue" unwinder becomes active and gives the wrong answer, while I'm actually interested in the result of the dwarf2 unwinder. Of course I can also manually disable the "i386 epilogue", but I take the fact that I have to do that as evidence that on amd64, the "i386 epilogue" is not only unnecessary, but in the way. Fix this by only adding the i386 unwinders if "info.bfd_arch_info->bits_per_word == 32". Note that the x32 abi (x86_64/-mx32): - has the same unwinder list as amd64 (x86_64/-m64) before this commit, - has info.bfd_arch_info->bits_per_word == 64, the same as amd64, and consequently, - has the same unwinder list as amd64 after this commit. Tested on x86_64-linux, -m64 and -m32. Not tested with -mx32. Reviewed-By: John Baldwin PR tdep/30102 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30102 2023-02-11 Alan Modra objdump -D of bss sections and -s with -j There is some inconsistency between the behaviour of objdump -D and objdump -s, both supposedly operating on all sections by default. objdump -s ignores bss sections, while objdump -D dissassembles the zeros. Fix this by making objdump -D ignore bss sections too. Furthermore, "objdump -s -j .bss" doesn't dump .bss as it should, since the user is specifically asking to look at all those zeros. This change does find some tests that used objdump -D with expected output in bss-style sections. I've updated all the msp430 tests that just wanted to find a non-empty section to look at section headers instead, making the tests slightly more stringent. The ppc xcoff and spu tests are fixed by adding -j options to objdump, which makes the tests somewhat more lenient. binutils/ * objdump.c (disassemble_section): Ignore sections without contents, unless overridden by -j. (dump_section): Allow -j to override the default of not displaying sections without contents. * doc/binutils.texi (objdump options): Update -D, -s and -j description. gas/ * testsuite/gas/ppc/xcoff-tls-32.d: Select wanted objdump sections with -j. * testsuite/gas/ppc/xcoff-tls-64.d: Likewise. ld/ * testsuite/ld-msp430-elf/main-bss-lower.d, * testsuite/ld-msp430-elf/main-bss-upper.d, * testsuite/ld-msp430-elf/main-const-lower.d, * testsuite/ld-msp430-elf/main-const-upper.d, * testsuite/ld-msp430-elf/main-text-lower.d, * testsuite/ld-msp430-elf/main-text-upper.d, * testsuite/ld-msp430-elf/main-var-lower.d, * testsuite/ld-msp430-elf/main-var-upper.d: Expect -wh output. * testsuite/ld-msp430-elf/msp430-elf.exp: Use objdump -wh rather than objdump -D or objdump -d with tests checking for non-empty given sections. * testsuite/ld-spu/ear.d, * testsuite/ld-spu/icache1.d, * testsuite/ld-spu/ovl.d, * testsuite/ld-spu/ovl2.d: Select wanted objdump sections. 2023-02-11 Alan Modra .debug sections without contents * dwarf1.c (_bfd_dwarf1_find_nearest_line): Exclude .debug sections without contents. 2023-02-11 Aaron Merey gdb/source: Fix open_source_file error handling open_source_file relies on errno to communicate the reason for a missing source file. open_source_file may also call debuginfod_find_source. It is possible for debuginfod_find_source to set errno to a value unrelated to the reason for a failed download. This can result in bogus error messages being reported as the reason for a missing source file. The following error message should instead be "No such file or directory": Temporary breakpoint 1, 0x00005555556f4de0 in main () (gdb) list Downloading source file /usr/src/debug/glibc-2.36-8.fc37.x86_64/elf/ 1 /usr/src/debug/glibc-2.36-8.fc37.x86_64/elf/: Directory not empty. Fix this by having open_source_file return a negative errno if it fails to open a source file. Use this value to generate the error message instead of errno. Approved-By: Tom Tromey Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29999 2023-02-11 Aaron Merey Move implementation of perror_with_name to gdbsupport gdbsupport/errors.h declares perror_with_name and leaves the implementation to the clients. However gdb and gdbserver's implementations are essentially the same, resulting in unnecessary code duplication. Fix this by implementing perror_with_name in gdbsupport. Add an optional parameter for specifying the errno used to generate the error message. Also move the implementation of perror_string to gdbsupport since perror_with_name requires it. Approved-By: Tom Tromey 2023-02-11 GDB Administrator Automatic date update in version.in 2023-02-10 Andrew Burgess GDB: Introduce limited array lengths while printing values This commit introduces the idea of loading only part of an array in order to print it, what I call "limited length" arrays. The motivation behind this work is to make it possible to print slices of very large arrays, where very large means bigger than `max-value-size'. Consider this GDB session with the current GDB: (gdb) set max-value-size 100 (gdb) p large_1d_array value requires 400 bytes, which is more than max-value-size (gdb) p -elements 10 -- large_1d_array value requires 400 bytes, which is more than max-value-size notice that the request to print 10 elements still fails, even though 10 elements should be less than the max-value-size. With a patched version of GDB: (gdb) p -elements 10 -- large_1d_array $1 = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9...} So now the print has succeeded. It also has loaded `max-value-size' worth of data into value history, so the recorded value can be accessed consistently: (gdb) p -elements 10 -- $1 $2 = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9...} (gdb) p $1 $3 = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, } (gdb) Accesses with other languages work similarly, although for Ada only C-style [] array element/dimension accesses use history. For both Ada and Fortran () array element/dimension accesses go straight to the inferior, bypassing the value history just as with C pointers. Co-Authored-By: Maciej W. Rozycki 2023-02-10 Maciej W. Rozycki GDB/testsuite: Add `-nonl' option to `gdb_test' Add a `-nonl' option to `gdb_test' making it possible to match output from commands such as `output' that do not produce a new line sequence at the end, e.g.: (gdb) output 0 0(gdb) 2023-02-10 Maciej W. Rozycki GDB: Only make data actually retrieved into value history available While it makes sense to allow accessing out-of-bounds elements in the debuggee and see whatever there might happen to be there in memory (we are a debugger and not a programming rules enforcement facility and we want to make people's life easier in chasing bugs), e.g.: (gdb) print one_hundred[-1] $1 = 0 (gdb) print one_hundred[100] $2 = 0 (gdb) we shouldn't really pretend that we have any meaningful data around values recorded in history (what these commands really retrieve are current debuggee memory contents outside the original data accessed, really confusing in my opinion). Mark values recorded in history as such then and verify accesses to be in-range for them: (gdb) print one_hundred[-1] $1 = (gdb) print one_hundred[100] $2 = Add a suitable test case, which also covers integer overflows in data location calculation. Approved-By: Tom Tromey 2023-02-10 Maciej W. Rozycki GDB: Fix the mess with value byte/bit range types Consistently use the LONGEST and ULONGEST types for value byte/bit offsets and lengths respectively, avoiding silent truncation for ranges exceeding the 32-bit span, which may cause incorrect matching. Also report a conversion overflow on byte ranges that cannot be expressed in terms of bits with these data types, e.g.: (gdb) print one_hundred[1LL << 58] Integer overflow in data location calculation (gdb) print one_hundred[(-1LL << 58) - 1] Integer overflow in data location calculation (gdb) Previously such accesses would be let through with unpredictable results produced. 2023-02-10 Maciej W. Rozycki GDB: Ignore `max-value-size' setting with value history accesses We have an inconsistency in value history accesses where array element accesses cause an error for entries exceeding the currently selected `max-value-size' setting even where such accesses successfully complete for elements located in the inferior, e.g.: (gdb) p/d one $1 = 0 (gdb) p/d one_hundred $2 = {0 } (gdb) p/d one_hundred[99] $3 = 0 (gdb) set max-value-size 25 (gdb) p/d one_hundred value requires 100 bytes, which is more than max-value-size (gdb) p/d one_hundred[99] $7 = 0 (gdb) p/d $2 value requires 100 bytes, which is more than max-value-size (gdb) p/d $2[99] value requires 100 bytes, which is more than max-value-size (gdb) According to our documentation the `max-value-size' setting is a safety guard against allocating an overly large amount of memory. Moreover a statement in documentation says, concerning this setting, that: "Setting this variable does not affect values that have already been allocated within GDB, only future allocations." While in the implementer-speak the sentence may be unambiguous I think the outside user may well infer that the setting does not apply to values previously printed. Therefore rather than just fixing this inconsistency it seems reasonable to lift the setting for value history accesses, under an implication that by having been retrieved from the debuggee they have already passed the safety check. Do it then, by suppressing the value size check in `value_copy' -- under an observation that if the original value has been already loaded (i.e. it's not lazy), then it must have previously passed said check -- making the last two commands succeed: (gdb) p/d $2 $8 = {0 } (gdb) p/d $2 [99] $9 = 0 (gdb) Expand the testsuite accordingly, covering both value history handling and the use of `value_copy' by `make_cv_value', used by Python code. 2023-02-10 Maciej W. Rozycki GDB: Switch to using C++ standard integer type limits Use instead of and ditch local fallback definitions for minimum and maximum value macros provided by C++11. Add LONGEST_MAX and LONGEST_MIN definitions. Approved-By: Tom Tromey 2023-02-10 Tom Tromey Ensure all DAP requests are keyword-only Python functions implementing DAP requests should not use positional parameters -- it only makes sense to call them with keyword arguments. This patch changes the few remaining cases to start with the special "*" parameter, following this rule. 2023-02-10 Simon Marchi gdb/testsuite: fix gdb.gdb/selftest.exp for native-extended-gdbserver Following commit 4e2a80ba606 ("gdb/testsuite: expect SIGSEGV from top GDB spawn id"), the next failure I get in gdb.gdb/selftest.exp, using the native-extended-gdbserver, is: (gdb) PASS: gdb.gdb/selftest.exp: send ^C to child process signal SIGINT Continuing with signal SIGINT. FAIL: gdb.gdb/selftest.exp: send SIGINT signal to child process (timeout) The problem is that in this gdb_test_multiple: set description "send SIGINT signal to child process" gdb_test_multiple "signal SIGINT" "$description" { -re "^signal SIGINT\r\nContinuing with signal SIGINT.\r\nQuit\r\n.* $" { pass "$description" } } The "Continuing with signal SIGINT" portion is printed by the top GDB, while the Quit portion is printed by the bottom GDB. As the gdb_test_multiple is written, it expects both the the top GDB's spawn id. Fix this by splitting the gdb_test_multiple in two. The first one expects the "Continuing with signal SIGINT" from the top GDB. The second one expect "Quit" and the "(xgdb)" prompt from $inferior_spawn_id. When debugging natively, this spawn id will be the same as the top GDB's spawn id, but it's different when debugging with GDBserver. Change-Id: I689bd369a041b48f4dc9858d38bf977d09600da2 2023-02-10 Tom Tromey Use std::string in main_info This changes main_info to use std::string. It removes some manual memory management. 2023-02-10 Tom de Vries [gdb/testsuite] Fix linespec ambiguity in gdb.base/longjmp.exp PR testsuite/30103 reports the following failure on aarch64-linux (ubuntu 22.04): ... (gdb) PASS: gdb.base/longjmp.exp: with_probes=0: pattern 1: next to longjmp next warning: Breakpoint address adjusted from 0x83dc305fef755015 to \ 0xffdc305fef755015. Warning: Cannot insert breakpoint 0. Cannot access memory at address 0xffdc305fef755015 __libc_siglongjmp (env=0xaaaaaaab1018 , val=1) at ./setjmp/longjmp.c:30 30 } (gdb) KFAIL: gdb.base/longjmp.exp: with_probes=0: pattern 1: gdb/26967 \ (PRMS: next over longjmp) delete breakpoints Delete all breakpoints? (y or n) y (gdb) info breakpoints No breakpoints or watchpoints. (gdb) break 63 No line 63 in the current file. Make breakpoint pending on future shared library load? (y or [n]) n (gdb) FAIL: gdb.base/longjmp.exp: with_probes=0: pattern 2: setup: breakpoint \ at pattern start (got interactive prompt) ... The test-case intends to set the breakpoint on line number 63 in gdb.base/longjmp.c. It tries to do so by specifying "break 63", which specifies a line in the "current source file". Due to the KFAIL PR, gdb stopped in __libc_siglongjmp, and because of presence of debug info, the "current source file" becomes glibc's ./setjmp/longjmp.c. Consequently, setting the breakpoint fails. Fix this by adding a $subdir/$srcfile: prefix to the breakpoint linespecs. I've managed to reproduce the FAIL on x86_64/-m32, by installing the glibc-32bit-debuginfo package. This allowed me to confirm the "current source file" that is used: ... (gdb) KFAIL: gdb.base/longjmp.exp: with_probes=0: pattern 1: gdb/26967 \ (PRMS: next over longjmp) info source^M Current source file is ../setjmp/longjmp.c^M ... Tested on x86_64-linux, target boards unix/{-m64,-m32}. Reported-By: Luis Machado Reviewed-By: Tom Tromey PR testsuite/30103 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30103 2023-02-10 Tom de Vries [gdb/cli] Add maint info frame-unwinders Add a new command "maint info frame-unwinders": ... (gdb) help maint info frame-unwinders List the frame unwinders currently in effect, starting with the highest \ priority. ... Output for i386: ... $ gdb -q -batch -ex "set arch i386" -ex "maint info frame-unwinders" The target architecture is set to "i386". dummy DUMMY_FRAME dwarf2 tailcall TAILCALL_FRAME inline INLINE_FRAME i386 epilogue NORMAL_FRAME dwarf2 NORMAL_FRAME dwarf2 signal SIGTRAMP_FRAME i386 stack tramp NORMAL_FRAME i386 sigtramp SIGTRAMP_FRAME i386 prologue NORMAL_FRAME ... Output for x86_64: ... $ gdb -q -batch -ex "set arch i386:x86-64" -ex "maint info frame-unwinders" The target architecture is set to "i386:x86-64". dummy DUMMY_FRAME dwarf2 tailcall TAILCALL_FRAME inline INLINE_FRAME python NORMAL_FRAME amd64 epilogue NORMAL_FRAME i386 epilogue NORMAL_FRAME dwarf2 NORMAL_FRAME dwarf2 signal SIGTRAMP_FRAME amd64 sigtramp SIGTRAMP_FRAME amd64 prologue NORMAL_FRAME i386 stack tramp NORMAL_FRAME i386 sigtramp SIGTRAMP_FRAME i386 prologue NORMAL_FRAME ... Tested on x86_64-linux. Reviewed-By: Tom Tromey Reviewed-By: Eli Zaretskii 2023-02-10 Tsukasa OI RISC-V: Reduce effective linker relaxation passses Commit 43025f01a0c9 ("RISC-V: Improve link time complexity.") reduced the time complexity of the linker relaxation but some code portions did not reflect this change. This commit fixes a comment describing each relaxation pass and reduces actual number of passes for the RISC-V linker relaxation from 3 to 2. Though it does not change the functionality, it marginally improves the performance while linking large programs (with many relocations). bfd/ChangeLog: * elfnn-riscv.c (_bfd_riscv_relax_section): Fix a comment to reflect current roles of each relaxation pass. ld/ChangeLog: * emultempl/riscvelf.em: Reduce the number of linker relaxation passes from 3 to 2. 2023-02-10 Alan Modra Fix mmo memory leaks The main one here is the section buffer, which can be quite large. By using alloc rather than malloc we can leave tidying memory to the generic bfd code when the bfd is closed. bfd_check_format also releases memory when object_p fails, so while it wouldn't be wrong to bfd_release at bad_format_free in mmo_object_p, it's a little extra code and work for no gain. * mmo.c (mmo_object_p): bfd_alloc rather than bfd_malloc lop_stab_symbol. Don't free/release on error. (mmo_get_spec_section): bfd_zalloc rather than bfd_zmalloc section buffer. (mmo_scan): Free fname on another error path. 2023-02-10 Alan Modra Local label checks in integer_constant "Local labels are never absolute" says the comment. Except when they are. Testcase .offset 0: a=0b I don't see any particular reason to disallow local labels inside struct definitions, so delete the comment and assertions. * expr.c (integer_constant): Delete local label assertions. 2023-02-10 Jan Beulich x86: drop use of VEX3SOURCES The attribute really specifies that the sum of register and memory operands is 4. Express it like that in most places, while using the 2nd (apart from XOP) CPU feature flags (FMA4) in reversed operand matching logic. With the use in build_modrm_byte() gone, part of an assertion there also becomes meaningless - simplify that at the same time. With all uses of the opcode modifier field gone, also drop that. 2023-02-10 Jan Beulich x86: drop use of XOP2SOURCES The few XOP insns which used it wrongly didn't have VexVVVV specified. With that added, the only further missing piece to use more generic code elsewhere is SwapSources - see e.g. the BMI2 insns for similar operand patterns. With the only users gone, drop the #define as well as the special case code. 2023-02-10 Jan Beulich x86: limit use of XOP2SOURCES The VPROT* forms with an immediate operand are entirely standard in the way their ModR/M bytes are built. There's no reason to invoke special case code. With that the handling of an immediate there can also be dropped; it was partially bogus anyway, as in its "no memory operands" portion it ignores the possibility of an immediate operand (which was okay only because that case was already handled by more generic code). 2023-02-10 Jan Beulich x86: move (and rename) opcodespace attribute This really isn't a "modifier" and rather ought to live next to the base opcode anyway. Use the bits we presently have available to fit in the field, renaming it to opcode_space. As an intended side effect this helps readability at the use sites, by shortening the references quite a bit. In generated code arrange for human readable output, by using the SPACE_* constants there rather than raw numbers. This may aid debugging down the road. 2023-02-10 Jan Beulich x86: simplify a few expressions Fold adjacent comparisons when, by ORing in a certain mask, the same effect can be achieved by a single one. In load_insn_p() this extends to further uses of an already available local variable. 2023-02-10 Jan Beulich x86: improve special casing of certain insns Now that we have identifiers for the mnemonic strings we can avoid opcode based comparisons, for (in many cases) being more expensive and (in a few cases) being a little fragile and not self-documenting. Note that the MOV optimization can be engaged by the earlier LEA one, and hence LEA also needs checking for there. 2023-02-10 Alan Modra objcopy of mach-o indirect symbols Anti-fuzzer measure. I'm not sure what the correct fix is for objcopy. Probably the BFD_MACH_O_S_NON_LAZY_SYMBOL_POINTERS, BFD_MACH_O_S_LAZY_SYMBOL_POINTERS and BFD_MACH_O_S_SYMBOL_STUBS contents should be read. * mach-o.c (bfd_mach_o_section_get_nbr_indirect): Omit sections with NULL sec->indirect_syms. 2023-02-10 GDB Administrator Automatic date update in version.in 2023-02-09 Tom Tromey Add full display feature to dwarf-mode.el I've found that I often use dwarf-mode with relatively small test files. In this situation, it's handy to be able to expand all the DWARF, rather than moving to each "..." separately and using C-u C-m. This patch implements this feature. It also makes a couple of other minor changes: * I removed a stale FIXME from dwarf-mode. In practice I find I often use "g" to restore the buffer to a pristine state; checking the file mtime would work against this. * I tightened the regexp in dwarf-insert-substructure. This prevents the C-m binding from trying to re-read a DIE which has already been expanded. * Finally, I've bumped the dwarf-mode version number so that this version can easily be installed using package.el. 2023-02-09 Tom Tromey * dwarf-mode.el: Bump version to 1.8. (dwarf-insert-substructure): Tighten regexp. (dwarf-refresh-all): New defun. (dwarf-mode-map): Bind "A" to dwarf-refresh-all. (dwarf-mode): Remove old FIXME. 2023-02-09 Tom Tromey Fix comment in gdb.rust/fnfield.exp gdb.rust/fnfield.exp has a comment that, I assume, I copied from some other test. This patch fixes it. 2023-02-09 Tom Tromey Trivially simplify rust_language::print_enum rust_language::print_enum computes: int nfields = variant_type->num_fields (); ... but then does not reuse this in one spot. This patch corrects the oversight. 2023-02-09 Roland McGrath [aarch64] Avoid initializers for VLAs Clang doesn't accept initializer syntax for variable-length arrays in C. Just use memset instead. 2023-02-09 Christina Schimpe gdb, testsuite: Remove unnecessary call of "set print pretty on" The command has no effect for the loading of GDB pretty printers and is removed by this patch to avoid confusion. Documentation for "set print pretty" "Cause GDB to print structures in an indented format with one member per line" 2023-02-09 Tom Tromey Increase size of main_type::nfields main_type::nfields is a 'short', and has been for many years. PR c++/29985 points out that 'short' is too narrow for an enum that contains more than 2^15 constants. This patch bumps the size of 'nfields'. To verify that the field isn't directly used, it is also renamed. Note that this does not affect the size of main_type on x86-64 Fedora 36. And, if it does have a negative effect somewhere, it's worth considering that types could be shrunk more drastically by using subclasses for the different codes. This is v2 of this patch, which has these changes: * I changed nfields to 'unsigned', per Simon's request. I looked at changing all the uses, but this quickly fans out into a very large patch. (One additional tweak was needed, though.) * I wrote a test case. I discovered that GCC cannot compile a large enough C test case, so I resorted to using the DWARF assembler. This test doesn't reproduce the crash, but it does fail without the patch. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29985 2023-02-09 Tom Tromey Remove mention of cooked_index_vector I noticed a leftover mention of cooked_index_vector. This updates the text. 2023-02-09 Tom Tromey Let user C-c when waiting for DWARF index finalization In PR gdb/29854, Simon pointed out that it would be good to be able to use C-c when the DWARF cooked index is waiting for finalization. The idea here is to be able to interrupt a command like "break" -- not to stop the finalization process itself, which runs in a worker thread. This patch implements this idea, by changing the index wait functions to, by default, allow a quit. Polling is done, because there doesn't seem to be a better way to interrupt a wait on a std::future. For v2, I realized that the thread compatibility code in thread-pool.h also needed an update. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29854 2023-02-09 Alan Modra coff keep_relocs and keep_contents keep_relocs is set by pe_ILF_save_relocs but not used anywhere in the coff/pe code. It is tested by the xcoff backend but not set. keep_contents is only used by the xcoff backend when dealing with the .loader section, and it's easy enough to dispense with it there. keep_contents is set in various places but that's fairly useless when the contents aren't freed anyway until later linker support functions, add_dynamic_symbols and check_dynamic_ar_symbols. There the contents were freed if keep_contents wasn't set. I reckon we can free them unconditionally. * coff-bfd.h (struct coff_section_tdata): Delete keep_relocs and keep_contents. * peicode.h (pe_ILF_save_relocs): Don't set keep_relocs. * xcofflink.c (xcoff_get_section_contents): Cache contents. Return the contents. Update callers. (_bfd_xcoff_canonicalize_dynamic_symtab): Don't set keep_contents for .loader. (xcoff_link_add_dynamic_symbols): Free .loader contents unconditionally. (xcoff_link_check_dynamic_ar_symbols): Likewise. 2023-02-09 GDB Administrator Automatic date update in version.in 2023-02-08 Alan Modra coff-sh.c keep_relocs, keep_contents and keep_syms keep_relocs and keep_contents are unused nowadays except by xcofflink.c, and I can't see a reason why keep_syms needs to be set. The external syms are read and used by sh_relax_section and used by sh_relax_delete_bytes. There doesn't appear to be any way that freeing them will cause trouble. * coff-sh.c (sh_relax_section): Don't set keep_relocs, keep_contents or keep_syms. (sh_relax_delete_bytes): Don't set keep_contents. 2023-02-08 Alan Modra Memory leak in bfd_init_section_compress_status * compress.c (bfd_init_section_compress_status): Free uncompressed_buffer on error return. 2023-02-08 Alan Modra Clear cached file size when bfd changed to BFD_IN_MEMORY If file size is calculated by bfd_get_file_size, as it is by _bfd_alloc_and_read calls in coff_object_p, then it is cached and when pe_ILF_build_a_bfd converts an archive entry over to BFD_IN_MEMORY, the file size is no longer valid. Found when attempting objdump -t on a very small (27 bytes) ILF file and hitting the pr24707 fix (commit 781152ec18f5). So, clear file size when setting BFD_IN_MEMORY on bfds that may have been read. (It's not necessary in writable bfds, because caching is ignored by bfd_get_size when bfd_write_p.) I also think the PR 24707 fix is no longer neeeded. All of the testcases in that PR and in PR24712 are caught earlier by file size checks when reading the symbols from file. So I'm reverting that fix, which just compared the size of an array of symbol pointers against file size. That's only valid if on-disk symbols are larger than a host pointer, so the test is better done in format-specific code. bfd/ * coff-alpha.c (alpha_ecoff_get_elt_at_filepos): Clear cached file size when making a BFD_IN_MEMORY bfd. * opncls.c (bfd_make_readable): Likewise. * peicode.h (pe_ILF_build_a_bfd): Likewise. binutils/ PR 24707 * objdump.c (slurp_symtab): Revert PR24707 fix. Tidy. (slurp_dynamic_symtab): Tidy. 2023-02-08 Alan Modra Internal error at gas/expr.c:1814 This is the assertion know (*input_line_pointer != ' '); after calling operand. The usual exit from operand calls SKIP_ALL_WHITESPACE. * expr.c (operand): Call SKIP_ALL_WHITESPACE after call to expr. 2023-02-08 Simon Marchi gdb: give sentinel for user frames distinct IDs, register sentinel frames to the frame cache The test gdb.base/frame-view.exp fails like this on AArch64: frame^M #0 baz (z1=hahaha, /home/simark/src/binutils-gdb/gdb/value.c:4056: internal-error: value_fetch_lazy_register: Assertion `next_frame != NULL' failed.^M A problem internal to GDB has been detected,^M further debugging may prove unreliable.^M FAIL: gdb.base/frame-view.exp: with_pretty_printer=true: frame (GDB internal error) The sequence of events leading to this is the following: - When we create the user frame (the "select-frame view" command), we create a sentinel frame just for our user-created frame, in create_new_frame. This sentinel frame has the same id as the regular sentinel frame. - When printing the frame, after doing the "select-frame view" command, the argument's pretty printer is invoked, which does an inferior function call (this is the point of the test). This clears the frame cache, including the "real" sentinel frame, which sets the sentinel_frame global to nullptr. - Later in the frame-printing process (when printing the second argument), the auto-reinflation mechanism re-creates the user frame by calling create_new_frame again, creating its own special sentinel frame again. However, note that the "real" sentinel frame, the sentinel_frame global, is still nullptr. If the selected frame had been a regular frame, we would have called get_current_frame at some point during the reinflation, which would have re-created the "real" sentinel frame. But it's not the case when reinflating a user frame. - Deep down the stack, something wants to fill in the unwind stop reason for frame 0, which requires trying to unwind frame 1. This leads us to trying to unwind the PC of frame 1: #0 gdbarch_unwind_pc (gdbarch=0xffff8d010080, next_frame=...) at /home/simark/src/binutils-gdb/gdb/gdbarch.c:2955 #1 0x000000000134569c in dwarf2_tailcall_sniffer_first (this_frame=..., tailcall_cachep=0xffff773fcae0, entry_cfa_sp_offsetp=0xfffff7f7d450) at /home/simark/src/binutils-gdb/gdb/dwarf2/frame-tailcall.c:390 #2 0x0000000001355d84 in dwarf2_frame_cache (this_frame=..., this_cache=0xffff773fc928) at /home/simark/src/binutils-gdb/gdb/dwarf2/frame.c:1089 #3 0x00000000013562b0 in dwarf2_frame_unwind_stop_reason (this_frame=..., this_cache=0xffff773fc928) at /home/simark/src/binutils-gdb/gdb/dwarf2/frame.c:1101 #4 0x0000000001990f64 in get_prev_frame_always_1 (this_frame=...) at /home/simark/src/binutils-gdb/gdb/frame.c:2281 #5 0x0000000001993034 in get_prev_frame_always (this_frame=...) at /home/simark/src/binutils-gdb/gdb/frame.c:2376 #6 0x000000000199b814 in get_frame_unwind_stop_reason (frame=...) at /home/simark/src/binutils-gdb/gdb/frame.c:3051 #7 0x0000000001359cd8 in dwarf2_frame_cfa (this_frame=...) at /home/simark/src/binutils-gdb/gdb/dwarf2/frame.c:1356 #8 0x000000000132122c in dwarf_expr_context::execute_stack_op (this=0xfffff7f80170, op_ptr=0xffff8d8883ee "\217\002", op_end=0xffff8d8883ee "\217\002") at /home/simark/src/binutils-gdb/gdb/dwarf2/expr.c:2110 #9 0x0000000001317b30 in dwarf_expr_context::eval (this=0xfffff7f80170, addr=0xffff8d8883ed "\234\217\002", len=1) at /home/simark/src/binutils-gdb/gdb/dwarf2/expr.c:1239 #10 0x000000000131d68c in dwarf_expr_context::execute_stack_op (this=0xfffff7f80170, op_ptr=0xffff8d88840e "", op_end=0xffff8d88840e "") at /home/simark/src/binutils-gdb/gdb/dwarf2/expr.c:1811 #11 0x0000000001317b30 in dwarf_expr_context::eval (this=0xfffff7f80170, addr=0xffff8d88840c "\221p", len=2) at /home/simark/src/binutils-gdb/gdb/dwarf2/expr.c:1239 #12 0x0000000001314c3c in dwarf_expr_context::evaluate (this=0xfffff7f80170, addr=0xffff8d88840c "\221p", len=2, as_lval=true, per_cu=0xffff90b03700, frame=..., addr_info=0x0, type=0xffff8f6c8400, subobj_type=0xffff8f6c8400, subobj_offset=0) at /home/simark/src/binutils-gdb/gdb/dwarf2/expr.c:1078 #13 0x000000000149f9e0 in dwarf2_evaluate_loc_desc_full (type=0xffff8f6c8400, frame=..., data=0xffff8d88840c "\221p", size=2, per_cu=0xffff90b03700, per_objfile=0xffff9070b980, subobj_type=0xffff8f6c8400, subobj_byte_offset=0, as_lval=true) at /home/simark/src/binutils-gdb/gdb/dwarf2/loc.c:1513 #14 0x00000000014a0100 in dwarf2_evaluate_loc_desc (type=0xffff8f6c8400, frame=..., data=0xffff8d88840c "\221p", size=2, per_cu=0xffff90b03700, per_objfile=0xffff9070b980, as_lval=true) at /home/simark/src/binutils-gdb/gdb/dwarf2/loc.c:1557 #15 0x00000000014aa584 in locexpr_read_variable (symbol=0xffff8f6cd770, frame=...) at /home/simark/src/binutils-gdb/gdb/dwarf2/loc.c:3052 - AArch64 defines a special "prev register" function, aarch64_dwarf2_prev_register, to handle unwinding the PC. This function does frame_unwind_register_unsigned (this_frame, AARCH64_LR_REGNUM); - frame_unwind_register_unsigned ultimately creates a lazy register value, saving the frame id of this_frame->next. this_frame is the user-created frame, to this_frame->next is the special sentinel frame we created for it. So the saved ID is the sentinel frame ID. - When time comes to un-lazify the value, value_fetch_lazy_register calls frame_find_by_id, to find the frame with the ID we saved. - frame_find_by_id sees it's the sentinel frame ID, so returns the sentinel_frame global, which is, if you remember, nullptr. - We hit the `gdb_assert (next_frame != NULL)` assertion in value_fetch_lazy_register. The issues I see here are: - The ID of the sentinel frame created for the user-created frame is not distinguishable from the ID of the regular sentinel frame. So there's no way frame_find_by_id could find the right frame, in value_fetch_lazy_register. - Even if they had distinguishable IDs, sentinel frames created for user frames are not registered anywhere, so there's no easy way frame_find_by_id could find it. This patch addresses these two issues: - Give sentinel frames created for user frames their own distinct IDs - Register sentinel frames in the frame cache, so they can be found with frame_find_by_id. I initially had this split in two patches, but I then found that it was easier to explain as a single patch. Rergarding the first part of the change: with this patch, the sentinel frames created for user frames (in create_new_frame) still have stack_status == FID_STACK_SENTINEL, but their code_addr and stack_addr fields are now filled with the addresses used to create the user frame. This ensures this sentinel frame ID is different from the "target" sentinel frame ID, as well as any other "user" sentinel frame ID. If the user tries to create the same frame, with the same addresses, multiple times, create_sentinel_frame just reuses the existing frame. So we won't end up with multiple user sentinels with the same ID. Regular "target" sentinel frames remain with code_addr and stack_addr unset. The concrete changes for that part are: - Remove the sentinel_frame_id constant, since there isn't one "sentinel frame ID" now. Add the frame_id_build_sentinel function for building sentinel frame IDs and a is_sentinel_frame_id function to check if a frame id represents a sentinel frame. - Replace the sentinel_frame_id check in frame_find_by_id with a comparison to `frame_id_build_sentinel (0, 0)`. The sentinel_frame global is meant to contain a reference to the "target" sentinel, so the one with addresses (0, 0). - Add stack and code address parameters to create_sentinel_frame, to be able to create the various types of sentinel frames. - Adjust get_current_frame to create the regular "target" sentinel. - Adjust create_new_frame to create a sentinel with the ID specific to the created user frame. - Adjust sentinel_frame_prev_register to get the sentinel frame ID from the frame_info object, since there isn't a single "sentinel frame ID" now. - Change get_next_frame_sentinel_okay to check for a sentinel-frame-id-like frame ID, rather than for sentinel_frame specifically, since this function could be called with another sentinel frame (and we would want the assert to catch it). The rest of the change is about registering the sentinel frame in the frame cache: - Change frame_stash_add's assertion to allow sentinel frame levels (-1). - Make create_sentinel_frame add the frame to the frame cache. - Change the "sentinel_frame != NULL" check in reinit_frame_cache for a check that the frame stash is not empty. The idea is that if we only have some user-created frames in the cache when reinit_frame_cache is called, we probably want to emit the frames invalid annotation. The goal of that check is to avoid unnecessary repeated annotations, I suppose, so the "frame cache not empty" check should achieve that. After this change, I think we could theoritically get rid of the sentienl_frame global. That sentinel frame could always be found by looking up `frame_id_build_sentinel (0, 0)` in the frame cache. However, I left the global there to avoid slowing the typical case down for nothing. I however, noted in its comment that it is an optimization. With this fix applied, the gdb.base/frame-view.exp now passes for me on AArch64. value_of_register_lazy now saves the special sentinel frame ID in the value, and value_fetch_lazy_register is able to find that sentinel frame after the frame cache reinit and after the user-created frame was reinflated. Tested-By: Alexandra Petlanova Hajkova Tested-By: Luis Machado Change-Id: I8b77b3448822c8aab3e1c3dda76ec434eb62704f 2023-02-08 Simon Marchi gdb: call frame unwinders' dealloc_cache methods through destroying the frame cache Currently, some frame resources are deallocated by iterating on the frame chain (starting from the sentinel), calling dealloc_cache. The problem is that user-created frames are not part of that chain, so we never call dealloc_cache for them. I propose to make it so the dealloc_cache callbacks are called when the frames are removed from the frame_stash hash table, by registering a deletion function to the hash table. This happens when frame_stash_invalidate is called by reinit_frame_cache. This way, all frames registered in the cache will get their unwinder's dealloc_cache callbacks called. Note that at the moment, the sentinel frames are not registered in the cache, so we won't call dealloc_cache for them. However, it's just a theoritical problem, because the sentinel frame unwinder does not provide this callback. Also, a subsequent patch will change things so that sentinel frames are registered to the cache. I moved the obstack_free / obstack_init pair below the frame_stash_invalidate call in reinit_frame_cache, because I assumed that some dealloc_cache would need to access some data on that obstack, so it would be better to free it after clearing the hash table. Change-Id: If4f9b38266b458c4e2f7eb43e933090177c22190 2023-02-08 Tom Tromey Remove block.h includes from some tdep files A few tdep files include block.h but do not need to. This patch removes the inclusions. I checked that this worked correctly by examining the resulting .Po file to make sure that block.h was not being included by some other route. Don't include block.h from expop.h expop.h needs block.h for a single inline function. However, I don't think most of the check_objfile functions need to be defined in the header (just the templates). This patch moves the one offending function and removes the include. 2023-02-08 Pedro Alves Simplify interp::exec / interp_exec - let exceptions propagate This patch implements a simplication that I suggested here: https://sourceware.org/pipermail/gdb-patches/2022-March/186320.html Currently, the interp::exec virtual method interface is such that subclass implementations must catch exceptions and then return them via normal function return. However, higher up the in chain, for the CLI we get to interpreter_exec_cmd, which does: for (i = 1; i < nrules; i++) { struct gdb_exception e = interp_exec (interp_to_use, prules[i]); if (e.reason < 0) { interp_set (old_interp, 0); error (_("error in command: \"%s\"."), prules[i]); } } and for MI we get to mi_cmd_interpreter_exec, which has: void mi_cmd_interpreter_exec (const char *command, char **argv, int argc) { ... for (i = 1; i < argc; i++) { struct gdb_exception e = interp_exec (interp_to_use, argv[i]); if (e.reason < 0) error ("%s", e.what ()); } } Note that if those errors are reached, we lose the original exception's error code. I can't see why we'd want that. And, I can't see why we need to have interp_exec catch the exception and return it via the normal return path. That's normally needed when we need to handle propagating exceptions across C code, like across readline or ncurses, but that's not the case here. It seems to me that we can simplify things by removing some try/catch-ing and just letting exceptions propagate normally. Note, the "error in command" error shown above, which only exists in the CLI interpreter-exec command, is only ever printed AFAICS if you run "interpreter-exec console" when the top level interpreter is already the console/tui. Like: (gdb) interpreter-exec console "foobar" Undefined command: "foobar". Try "help". error in command: "foobar". You won't see it with MI's "-interpreter-exec console" from a top level MI interpreter: (gdb) -interpreter-exec console "foobar" &"Undefined command: \"foobar\". Try \"help\".\n" ^error,msg="Undefined command: \"foobar\". Try \"help\"." (gdb) nor with MI's "-interpreter-exec mi" from a top level MI interpreter: (gdb) -interpreter-exec mi "-foobar" ^error,msg="Undefined MI command: foobar",code="undefined-command" ^done (gdb) in both these cases because MI's -interpreter-exec just does: error ("%s", e.what ()); You won't see it either when running an MI command with the CLI's "interpreter-exec mi": (gdb) interpreter-exec mi "-foobar" ^error,msg="Undefined MI command: foobar",code="undefined-command" (gdb) This last case is because MI's interp::exec implementation never returns an error: gdb_exception mi_interp::exec (const char *command) { mi_execute_command_wrapper (command); return gdb_exception (); } Thus I think that "error in command" error is pretty pointless, and since it simplifies things to not have it, the patch just removes it. The patch also ends up addressing an old FIXME. Change-Id: I5a6432a80496934ac7127594c53bf5221622e393 Approved-By: Tom Tromey Approved-By: Kevin Buettner 2023-02-08 Tom Tromey Avoid FAILs in gdb.compile Many gdb.compile C++ tests fail for me on Fedora 36. I think these are largely bugs in the plugin, though I didn't investigate too deeply. Once one failure is seen, this often cascades and sometimes there are many timeouts. For example, this can happen: (gdb) compile code var = a->get_var () warning: Could not find symbol "_ZZ9_gdb_exprP10__gdb_regsE1a" for compiled module "/tmp/gdbobj-0xdI6U/out2.o". 1 symbols were missing, cannot continue. I think this is probably a plugin bug because, IIRC, in theory these symbols should be exempt from a lookup via gdb. This patch arranges to catch any catastrophic failure and then simply exit the entire .exp file. 2023-02-08 Tom Tromey Don't let .gdb_history file cause failures I had a .gdb_history file in my testsuite directory in the build tree, and this provoked a failure in gdbhistsize-history.exp. It seems simple to prevent this file from causing a failure. 2023-02-08 Tom Tromey Merge fixup_section and fixup_symbol_section fixup_symbol_section delegates all its work to fixup_section, so merge the two. Because there is only a single caller to fixup_symbol_section, we can also remove some of the introductory logic. For example, this will never be called with a NULL objfile any more. The LOC_BLOCK case can be removed, because such symbols are handled by the buildsym code now. Finally, a symbol can only appear in a SEC_ALLOC section, so the loop is modified to skip sections that do not have this flag set. 2023-02-08 Tom Tromey Remove most calls to fixup_symbol_section Nearly every call to fixup_symbol_section in gdb is incorrect, and if any such call has an effect, it's purely by happenstance. fixup_section has a long comment explaining that the call should only be made before runtime section offsets are applied. And, the loop in this code (the fallback loop -- the minsym lookup code is "ok") is careful to remove these offsets before comparing addresses. However, aside from a single call in dwarf2/read.c, every call in gdb is actually done after section offsets have been applied. So, these calls are incorrect. Now, these calls could be made when the symbol is created. I considered this approach, but I reasoned that the code has been this way for many years, seemingly without ill effect. So, instead I chose to simply remove the offending calls. 2023-02-08 Tom Tromey Set section index when setting a symbol's block When a symbol's block is set, the block has the runtime section offset applied. So, it seems to me that the symbol implicitly is in the same section as the block. Therefore, this patch sets the symbol's section index at this same spot. Remove compunit_symtab::m_block_line_section The previous patch hard-coded SECT_OFF_TEXT into the buildsym code. After this, it's clear that there is only one caller of compunit_symtab::set_block_line_section, and it always passes SECT_OFF_TEXT. So, remove compunit_symtab::m_block_line_section and use SECT_OFF_TEXT instead. Do not pass section index to end_compunit_symtab Right now, the section index passed to end_compunit_symtab is always SECT_OFF_TEXT. Remove this parameter and simply always use SECT_OFF_TEXT. 2023-02-08 Tom Tromey Set section indices when symbols are made Most places in gdb that create a new symbol will apply a section offset to the address. It seems to me that the choice of offset here is also an implicit choice of the section. This is particularly true if you examine fixup_section, which notes that it must be called before such offsets are applied -- meaning that if any such call has an effect, it's purely by accident. This patch cleans up this area by tracking the section index and applying it to a symbol when the address is set. This is done for nearly every case -- the remaining cases will be handled in later patches. 2023-02-08 Tom Tromey Use default section indexes in fixup_symbol_section If fixup_section does not find a matching section, it arbitrarily chooses the first one. However, it seems better to make this default depend on the type of the symbol -- i.e., default data symbols to .data and text symbols to .text. I've also made fixup_section static, as it only has one caller. 2023-02-08 Tom Tromey Simplify checks of cooked_index This changes the cooked_index_functions to avoid an extra null check now that checked_static_cast allows a null argument. Approved-By: Simon Marchi 2023-02-08 Tom de Vries [gdb/testsuite] Use maint ignore-probes in gdb.base/longjmp.exp Test-case gdb.base/longjmp.exp handles both the case that there is a libc longjmp probe, and the case that there isn't. However, it only tests one of the two cases. Use maint ignore-probes to test both cases, if possible. Tested on x86_64-linux. 2023-02-08 Tom de Vries [gdb/testsuite] Use maint ignore-probes in gdb.base/solib-corrupted.exp Test-case gdb.base/solib-corrupted.exp only works for a glibc without probes interface, otherwise we run into: ... XFAIL: gdb.base/solib-corrupted.exp: info probes UNTESTED: gdb.base/solib-corrupted.exp: GDB is using probes ... Fix this by using maint ignore-probes to simulate the absence of the relevant probes. Also, it requires glibc debuginfo, and if not present, it produces an XFAIL: ... XFAIL: gdb.base/solib-corrupted.exp: make solibs looping UNTESTED: gdb.base/solib-corrupted.exp: no _r_debug symbol has been found ... This is incorrect, because an XFAIL indicates a known problem in the environment. In this case, there is no problem: the environment is functioning as expected when glibc debuginfo is not installed. Fix this by using UNSUPPORTED instead, and make the message less cryptic: ... UNSUPPORTED: gdb.base/solib-corrupted.exp: make solibs looping \ (glibc debuginfo required) ... Finally, with glibc debuginfo present, we run into: ... (gdb) PASS: gdb.base/solib-corrupted.exp: make solibs looping info sharedlibrary^M warning: Corrupted shared library list: 0x7ffff7ffe750 != 0x0^M From To Syms Read Shared Object Library^M 0x00007ffff7dd4170 0x00007ffff7df4090 Yes /lib64/ld-linux-x86-64.so.2^M (gdb) FAIL: gdb.base/solib-corrupted.exp: corrupted list \ (shared library list corrupted) ... due to commit 44288716537 ("gdb, testsuite: extend gdb_test_multiple checks"). Fix this by rewriting into gdb_test_multiple and using -early. Tested on x86_64-linux, with and without glibc debuginfo installed. 2023-02-08 Vladimir Mezentsev gprofng: fix SIGSEGV when processing unusual dwarf gprofng/ChangeLog 2023-02-07 Vladimir Mezentsev PR gprofng/30093 * src/Dwarf.cc: add nullptr check. * src/DwarfLib.cc: Likewise. 2023-02-08 Alan Modra Re: Resetting section vma after _bfd_dwarf2_find_nearest_line f.bfd_ptr is set too early to be a reliable indicator of good debug info. * dwarf2.c (_bfd_dwarf2_slurp_debug_info): Correct test for debug info being previously found. 2023-02-08 GDB Administrator Automatic date update in version.in 2023-02-07 Andrew Burgess gdb: fix display of thread condition for multi-location breakpoints This commit addresses the issue in PR gdb/30087. If a breakpoint with multiple locations has a thread condition, then the 'info breakpoints' output is a little messed up, here's an example of the current output: (gdb) break foo thread 1 Breakpoint 2 at 0x401114: foo. (3 locations) (gdb) break bar thread 1 Breakpoint 3 at 0x40110a: file /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c, line 32. (gdb) info breakpoints Num Type Disp Enb Address What 2 breakpoint keep y thread 1 stop only in thread 1 2.1 y 0x0000000000401114 in foo at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:25 2.2 y 0x0000000000401146 in foo at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:25 2.3 y 0x0000000000401168 in foo at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:25 3 breakpoint keep y 0x000000000040110a in bar at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:32 thread 1 stop only in thread 1 Notice that, at the end of the location for breakpoint 3, the 'thread 1' condition is printed, but this is then repeated on the next line with 'stop only in thread 1'. In contrast, for breakpoint 2, the 'thread 1' appears randomly, in the "What" column, though slightly offset, non of the separate locations have the 'thread 1' information. Additionally for breakpoint 2 we also get a 'stop only in thread 1' line. There's two things going on here. First the randomly placed 'thread 1' for breakpoint 2 is due to a bug in print_one_breakpoint_location, where we check the variable part_of_multiple instead of header_of_multiple. If I fix this oversight, then the output is now: (gdb) break foo thread 1 Breakpoint 2 at 0x401114: foo. (3 locations) (gdb) break bar thread 1 Breakpoint 3 at 0x40110a: file /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c, line 32. (gdb) info breakpoints Num Type Disp Enb Address What 2 breakpoint keep y stop only in thread 1 2.1 y 0x0000000000401114 in foo at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:25 thread 1 2.2 y 0x0000000000401146 in foo at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:25 thread 1 2.3 y 0x0000000000401168 in foo at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:25 thread 1 3 breakpoint keep y 0x000000000040110a in bar at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:32 thread 1 stop only in thread 1 The 'thread 1' condition is now displayed at the end of each location, which makes the output the same for single location breakpoints and multi-location breakpoints. However, there's still some duplication here. Both breakpoints 2 and 3 include a 'stop only in thread 1' line, and it feels like the additional 'thread 1' is redundant. In fact, there's a comment to this very effect in the code: /* FIXME: This seems to be redundant and lost here; see the "stop only in" line a little further down. */ So, lets fix this FIXME. The new plan is to remove all the trailing 'thread 1' markers from the CLI output, we now get this: (gdb) break foo thread 1 Breakpoint 2 at 0x401114: foo. (3 locations) (gdb) break bar thread 1 Breakpoint 3 at 0x40110a: file /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c, line 32. (gdb) info breakpoints Num Type Disp Enb Address What 2 breakpoint keep y stop only in thread 1 2.1 y 0x0000000000401114 in foo at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:25 2.2 y 0x0000000000401146 in foo at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:25 2.3 y 0x0000000000401168 in foo at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:25 3 breakpoint keep y 0x000000000040110a in bar at /tmp/src/gdb/testsuite/gdb.base/thread-bp-multi-loc.c:32 stop only in thread 1 All of the above points are also true for the Ada 'task' breakpoint condition, and the changes I've made also update how the task information is printed, though in the case of the Ada task there was no 'stop only in task XXX' line printed, so I've added one of those. Obviously it can't be quite that easy. For MI backwards compatibility I've retained the existing code (but now only for MI like outputs), which ensures we should generate backwards compatible output. I've extended an Ada test to cover the new task related output, and updated all the tests I could find that checked for the old output. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30087 Approved-By: Pedro Alves 2023-02-07 Nick Clifton Fix documentation of the 'n' symbol type displayed by nm. PR 30080 * doc/binutils.texi (nm): Update description of the 'n' symbol type. 2023-02-07 Tom de Vries [gdb/testsuite] Improve untested message in gdb.ada/finish-var-size.exp I came across: ... UNTESTED: gdb.ada/finish-var-size.exp: GCC too told for this test ... The message only tells us that the compiler version too old, not what compiler version is required. Fix this by rewriting using required: ... UNSUPPORTED: gdb.ada/finish-var-size.exp: require failed: \ expr [gcc_major_version] >= 12 ... Tested on x86_64-linux. 2023-02-07 GDB Administrator Automatic date update in version.in 2023-02-06 Simon Marchi gdb: adjust comment on target_desc_info::from_user_p Remove the stale reference to INFO, which is now "this target description info" now. Change-Id: I35dbdb089048ed7cfffe730d3134ee391b176abf 2023-02-06 Andrew Burgess gdb/doc: extend the documentation for the 'handle' command The documentation for the 'handle' command does not cover all of the features of the command, and in one case, is just wrong. The user can specify 'all' as signal name, the documentation implies that this will change the behaviour of all signals, in reality, this changes all signals except SIGINT and SIGTRAP (the signals used by GDB). I've updated the docs to list this limitation. The 'handle' command also allows the user to specify multiple signals for a single command, e.g. 'handle SIGFPE SIGILL nostop pass print', however the documentation doesn't describe this, so I've updated the docs to describe this feature. 2023-02-06 Alan Modra ppc32 and "LOAD segment with RWX permissions" When using a bss-plt we'll always trigger the RWX warning, which disturbs gcc test results. On the other hand, there may be reason to want the warning when gcc is configured with --enable-secureplt. So turning off the warning entirely for powerpc might not be the best solution. Instead, we'll turn off the warning whenever a bss-plt is generated, unless the user explicitly asked for the warning. bfd/ * elf32-ppc.c (ppc_elf_select_plt_layout): Set no_warn_rwx_segments on generating a bss plt, unless explicity enabled by the user. Also show the bss-plt warning when --warn-rwx-segments is given without --bss-plt. include/ * bfdlink.h (struct bfd_link_info): Add user_warn_rwx_segments. ld/ * lexsup.c (parse_args): Set user_warn_rwx_segments. * testsuite/ld-elf/elf.exp: Pass --secure-plt for powerpc to the rwx tests. 2023-02-06 Tom de Vries [gdb/testsuite] Fix gdb.threads/schedlock.exp on fast cpu Occasionally, I run into: ... (gdb) PASS: gdb.threads/schedlock.exp: schedlock=on: cmd=continue: \ set scheduler-locking on continue^M Continuing.^M PASS: gdb.threads/schedlock.exp: schedlock=on: cmd=continue: \ continue (with lock) [Thread 0x7ffff746e700 (LWP 1339) exited]^M No unwaited-for children left.^M (gdb) Quit^M (gdb) FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=continue: \ stop all threads (with lock) (timeout) ... What happens is that this loop which is supposed to run "just short of forever": ... /* Don't run forever. Run just short of it :) */ while (*myp > 0) { /* schedlock.exp: main loop. */ MAYBE_CALL_SOME_FUNCTION(); (*myp) ++; } ... finishes after 0x7fffffff iterations (when a signed wrap occurs), which on my system takes only about 1.5 seconds. Fix this by: - changing the pointed-at type of myp from signed to unsigned, which makes the wrap defined behaviour (and which also make the loop run twice as long, which is already enough to make it impossible for me to reproduce the FAIL. But let's try to solve this more structurally). - changing the pointed-at type of myp from int to long long, making the wrap unlikely. - making sure the loop runs forever, by setting the loop condition to 1. - making sure the loop still contains different lines (as far as debug info is concerned) by incrementing a volatile counter in the loop. - making sure the program doesn't run forever in case of trouble, by adding an "alarm (30)". Tested on x86_64-linux. PR testsuite/30074 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30074 2023-02-06 Andrew Burgess gdb: error if 'thread' or 'task' keywords are overused When creating a breakpoint or watchpoint, the 'thread' and 'task' keywords can be used to create a thread or task specific breakpoint or watchpoint. Currently, a thread or task specific breakpoint can only apply for a single thread or task, if multiple threads or tasks are specified when creating the breakpoint (or watchpoint), then the last specified id will be used. The exception to the above is that when the 'thread' keyword is used during the creation of a watchpoint, GDB will give an error if 'thread' is given more than once. In this commit I propose making this behaviour consistent, if the 'thread' or 'task' keywords are used more than once when creating either a breakpoint or watchpoint, then GDB will give an error. I haven't updated the manual, we don't explicitly say that these keywords can be repeated, and (to me), given the keyword takes a single id, I don't think it makes much sense to repeat the keyword. As such, I see this more as adding a missing error to GDB, rather than making some big change. However, I have added an entry to the NEWS file as I guess it is possible that some people might hit this new error with an existing (I claim, badly written) GDB script. I've added some new tests to check for the new error. Just one test needed updating, gdb.linespec/keywords.exp, this test did use the 'thread' keyword twice, and expected the breakpoint to be created. Looking at what this test was for though, it was checking the use of '-force-condition', and I don't think that being able to repeat 'thread' was actually a critical part of this test. As such, I've updated this test to expect the error when 'thread' is repeated. 2023-02-06 Alan Modra Resetting section vma after _bfd_dwarf2_find_nearest_line There are failure paths in _bfd_dwarf2_slurp_debug_info that can result in altered section vmas. Also, when setting ET_REL section vmas it's not too difficult to handle cases where the original vma was non-zero, so do that too. This patch was really in response to an addr2line buffer overflow processing a fuzzed mips relocatable object file. The file had a number of .debug_info sections with relocations that included lo16 and hi16 relocs, and in that order. At least one section VMA was non-zero. This resulted in processing of DWARF info twice, once via the call to _bfd_dwarf2_find_nearest_line in _bfd_mips_elf_find_nearest_line, and because that failed leaving VMAs altered, the second via the call in _bfd_elf_find_nearest_line. The first call left entries on mips_hi16_list pointing at buffers allocated during the first call, the second call processed the mips_hi16_list after the buffers had been freed. (At least when running with asan and under valgrind. Under gdb with a non-asan addr2line the second call allocated exactly the same buffer and the bug didn't show.) Now I don't really care too much what happens with fuzzed files, but the logic in _bfd_dwarf2_find_nearest_line is meant to result in only one read of .debug_info, not multiple reads of the same info when there are errors. This patch fixes that problem. * dwarf2.c (struct adjusted_section): Add orig_vma. (unset_sections): Reset vma to it. (place_sections): Handle non-zero vma too. Save orig_vma. (_bfd_dwarf2_slurp_debug_info): Tidy. Correct outdated comment. On error returns after calling place_sections, call unset_sections. (_bfd_dwarf2_find_nearest_line_with_alt): Simplify call to unset_sections. 2023-02-06 Romain Geissler [PR 30082] Pass $JANSSON_LIBS and $ZSTD_LIBS to ld-bootstrap/bootrap.exp 2023-02-06 GDB Administrator Automatic date update in version.in 2023-02-05 GDB Administrator Automatic date update in version.in 2023-02-04 Andrew Burgess gdb/testsuite: don't try to set non-stop mode on a running target The test gdb.threads/thread-specific-bp.exp tries to set non-stop mode on a running target, something which the manual makes clear is not allowed. This commit restructures the test a little, we now set the non-stop mode as part of the GDBFLAGS, so the mode will be set before GDB connects to the target. As a consequence I'm able to move the with_test_prefix out of the check_thread_specific_breakpoint proc. The check_thread_specific_breakpoint proc is now called within a loop. After this commit the gdb.threads/thread-specific-bp.exp test still has some failures, this is because of an issue GDB currently has printing "Thread ... exited" messages. This problem should be addressed by this patch: https://sourceware.org/pipermail/gdb-patches/2022-December/194694.html when it is merged. 2023-02-04 Dimitar Dimitrov ld: pru: Add optional section alignments The Texas Instruments SoCs with AARCH64 host processors have stricter alignment requirements than ones with ARM32 host processors. It's not only the requirement for resource_table to be aligned to 8. But also any loadable segment size must be a multiple of 4 [1]. The current PRU default linker script may output a segment size not aligned to 4, which would cause firmware load failure on AARCH64 hosts. Fix this by using COMMONPAGESIZE and MAXPAGESIZE to signify respectively the section memory size requirement and the resource table section's start address alignment. This would avoid penalizing the ARM32 hosts, for which the default values (1 and 1) are sufficient. For AARCH64 hosts, the alignments would be overwritten from GCC spec files using the linker command line, e.g.: -z common-page-size=4 -z max-page-size=8 [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/remoteproc/pru_rproc.c?h=v6.1#n555 ld/ChangeLog: * scripttempl/pru.sc (_data_end): Remove the alignment. (.data): Align output section size to COMMONPAGESIZE. (.resource_table): Ditto. 2023-02-04 Dimitar Dimitrov ld: pru: Merge the bss input sections into data The popular method to load PRU firmware is through the remoteproc Linux kernel driver. In order to save a few bytes from the firmware, the PRU CRT0 is spared from calling memset for the bss segment [1]. Instead the host loader is supposed to zero out the bss segment. This is important for PRU, which typically has only 8KB for instruction memory. The legacy non-mainline PRU host driver relied on the default behaviour of the kernel core remoteproc [2]. That default is to zero out the loadable memory regions not backed by file storage (i.e. the bss sections). This worked for the libgloss' CRT0. But the PRU loader merged in mainline Linux explicitly changes the default behaviour [3]. It no longer is zeroing out memory regions. Hence the bss sections are not initialized - neither by CRT0, nor by the host loader. This patch fixes the issue by aligning the GNU LD default linker script with the mainline Linux kernel expectation. Since the mainline kernel driver is submitted by the PRU manufacturer itself (Text Instruments), we can consider that as defining the ABI. This change has been tested on Beaglebone AI-64 [4]. Static counter variables in the firmware are now always starting from zero, as expected. There was only one new toolchain test failure in orphan3.d, due to reordering of the output sections. I believe this is a harmless issue. I could not rewrite the PASS criteria to ignore the output section ordering, so I have disabled that test case for PRU. [1] https://sourceware.org/git/?p=newlib-cygwin.git;a=blob;f=libgloss/pru/crt0.S;h=b3f0d53a93acc372f461007553e7688ca77753c9;hb=HEAD#l40 [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/remoteproc/remoteproc_elf_loader.c?h=v6.1#n228 [3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/remoteproc/pru_rproc.c?h=v6.1#n641 [4] https://beagleboard.org/ai-64 ld/ChangeLog: * scripttempl/pru.sc (.data): Merge .bss input sections into the .data output section. * testsuite/ld-elf/orphan3.d: Disable for PRU. 2023-02-04 GDB Administrator Automatic date update in version.in 2023-02-03 Guillermo E. Martinez bpf: fix error conversion from long unsigned int to unsigned int [-Werror=overflow] Regenerating BPF target using the maintainer mode emits: .../opcodes/bpf-opc.c:57:11: error: conversion from ‘long unsigned int’ to ‘unsigned int’ changes value from ‘18446744073709486335’ to ‘4294902015’ [-Werror=overflow] 57 | 64, 64, 0xffffffffffff00ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } The use of a narrow size to handle the mask CGEN in instruction format is causing this error. Additionally eBPF `call' instructions constructed by expressions using symbols (BPF_PSEUDO_CALL) emits annotations in `src' field of the instruction, used to identify BPF target endianness. cpu/ * bpf.cpu (define-call-insn): Remove `src' field from instruction mask. include/ *opcode/cge.h (CGEN_IFMT): Adjust mask bit width. opcodes/ * bpf-opc.c: Regenerate. 2023-02-03 Simon Marchi gdb: make target_desc_info_from_user_p a method of target_desc_info Move the implementation over to target_desc_info. Remove the target_desc_info forward declaration in target-descriptions.h, it's no longer needed. Change-Id: Ic95060341685afe0b73af591ca6efe32f5e7e892 2023-02-03 Simon Marchi gdb: remove copy_inferior_target_desc_info This function is now trivial, we can just copy inferior::tdesc_info where needed. Change-Id: I25185e2cd4ba1ef24a822d9e0eebec6e611d54d6 2023-02-03 Simon Marchi gdb: remove get_tdesc_info Remove this function, since it's now a trivial access to inferior::tdesc_info. Change-Id: I3e88a8214034f1a4163420b434be11f51eef462c 2023-02-03 Simon Marchi gdb: change inferior::tdesc_info to non-pointer I initially made this field a unique pointer, to have automatic memory management. But I then thought that the field didn't really need to be allocated separately from struct inferior. So make it a regular non-pointer field of inferior. Remove target_desc_info_free, as it's no longer needed. Change-Id: Ica2b97071226f31c40e86222a2f6922454df1229 2023-02-03 Simon Marchi gdb: move target_desc_info to inferior.h In preparation for the following patch, where struct inferior needs to "see" struct target_desc_info, move target_desc_info to the header file. I initially moved the structure to target-descriptions.h, and later made inferior.h include target-descriptions.h. This worked, but it then occured to me that target_desc_info is really an inferior property that involves a target description, so I think it makes sense to have it in inferior.h. Change-Id: I3e81d04faafcad431e294357389f3d4c601ee83d 2023-02-03 Simon Marchi gdb: use assignment to initialize variable in tdesc_parse_xml Since allocate_target_description returns a target_desc_up, use assignment to initialize the description variable. Change-Id: Iab3311642c09b95648984f305936f4a4cde09440 2023-02-03 Jan Beulich x86: drop LOCK from XCHG when optimizing Like with segment overrides on LEA, optimize away such a redundant instruction prefix. x86-64: respect {nooptimize} when building VEX prefix Swapping operands for commutative insns occurs outside of optimize_encoding() and hence needs explicit checking for a request to avoid any optimizations. x86: respect {nooptimize} for LEA Dropping a meaningless segment prefix occurs outside of optimize_encoding() and hence needs explicit checking for a request to avoid any optimizations. x86-64: respect MOVABS when choosing alternative encodings The alternative encoding is valid for MOV, but there's no such thing for MOVABS. RISC-V: don't disassemble unrecognized insns as .byte Insn width granularity being 16 bits, producing byte granular output isn't very useful. With there being a way to specific otherwise unknown insns to the assembler, use that same representation (to be precise: its , flavor) for disassembly. 2023-02-03 Alan Modra Add ECOFF Symbolic Header sanity checks Anti-fuzzer measures. The checks don't ensure the various elements in the header are distinct, but that isn't important as far as making sure we don't overrun the buffer containing all the elements. Also, we now don't care about offsets where the corresponding count is zero. * ecoff.c (_bfd_ecoff_slurp_symbolic_info): Sanity check offsets in debug->symbolic_header. 2023-02-03 GDB Administrator Automatic date update in version.in 2023-02-02 Simon Marchi gdb: initial support for ROCm platform (AMDGPU) debugging This patch adds the foundation for GDB to be able to debug programs offloaded to AMD GPUs using the AMD ROCm platform [1]. The latest public release of the ROCm release at the time of writing is 5.4, so this is what this patch targets. The ROCm platform allows host programs to schedule bits of code for execution on GPUs or similar accelerators. The programs running on GPUs are typically referred to as `kernels` (not related to operating system kernels). Programs offloaded with the AMD ROCm platform can be written in the HIP language [2], OpenCL and OpenMP, but we're going to focus on HIP here. The HIP language consists of a C++ Runtime API and kernel language. Here's an example of a very simple HIP program: #include "hip/hip_runtime.h" #include __global__ void do_an_addition (int a, int b, int *out) { *out = a + b; } int main () { int *result_ptr, result; /* Allocate memory for the device to write the result to. */ hipError_t error = hipMalloc (&result_ptr, sizeof (int)); assert (error == hipSuccess); /* Run `do_an_addition` on one workgroup containing one work item. */ do_an_addition<<>> (1, 2, result_ptr); /* Copy result from device to host. Note that this acts as a synchronization point, waiting for the kernel dispatch to complete. */ error = hipMemcpyDtoH (&result, result_ptr, sizeof (int)); assert (error == hipSuccess); printf ("result is %d\n", result); assert (result == 3); return 0; } This program can be compiled with: $ hipcc simple.cpp -g -O0 -o simple ... where `hipcc` is the HIP compiler, shipped with ROCm releases. This generates an ELF binary for the host architecture, containing another ELF binary with the device code. The ELF for the device can be inspected with: $ roc-obj-ls simple 1 host-x86_64-unknown-linux file://simple#offset=8192&size=0 1 hipv4-amdgcn-amd-amdhsa--gfx906 file://simple#offset=8192&size=34216 $ roc-obj-extract 'file://simple#offset=8192&size=34216' $ file simple-offset8192-size34216.co simple-offset8192-size34216.co: ELF 64-bit LSB shared object, *unknown arch 0xe0* version 1, dynamically linked, with debug_info, not stripped ^ amcgcn architecture that my `file` doesn't know about ----´ Running the program gives the very unimpressive result: $ ./simple result is 3 While running, this host program has copied the device program into the GPU's memory and spawned an execution thread on it. The goal of this GDB port is to let the user debug host threads and these GPU threads simultaneously. Here's a sample session using a GDB with this patch applied: $ ./gdb -q -nx --data-directory=data-directory ./simple Reading symbols from ./simple... (gdb) break do_an_addition Function "do_an_addition" not defined. Make breakpoint pending on future shared library load? (y or [n]) y Breakpoint 1 (do_an_addition) pending. (gdb) r Starting program: /home/smarchi/build/binutils-gdb-amdgpu/gdb/simple [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". [New Thread 0x7ffff5db7640 (LWP 1082911)] [New Thread 0x7ffef53ff640 (LWP 1082913)] [Thread 0x7ffef53ff640 (LWP 1082913) exited] [New Thread 0x7ffdecb53640 (LWP 1083185)] [New Thread 0x7ffff54bf640 (LWP 1083186)] [Thread 0x7ffdecb53640 (LWP 1083185) exited] [Switching to AMDGPU Wave 2:2:1:1 (0,0,0)/0] Thread 6 hit Breakpoint 1, do_an_addition (a=, b=, out=) at simple.cpp:24 24 *out = a + b; (gdb) info inferiors Num Description Connection Executable * 1 process 1082907 1 (native) /home/smarchi/build/binutils-gdb-amdgpu/gdb/simple (gdb) info threads Id Target Id Frame 1 Thread 0x7ffff5dc9240 (LWP 1082907) "simple" 0x00007ffff5e9410b in ?? () from /opt/rocm-5.4.0/lib/libhsa-runtime64.so.1 2 Thread 0x7ffff5db7640 (LWP 1082911) "simple" __GI___ioctl (fd=3, request=3222817548) at ../sysdeps/unix/sysv/linux/ioctl.c:36 5 Thread 0x7ffff54bf640 (LWP 1083186) "simple" __GI___ioctl (fd=3, request=3222817548) at ../sysdeps/unix/sysv/linux/ioctl.c:36 * 6 AMDGPU Wave 2:2:1:1 (0,0,0)/0 do_an_addition ( a=, b=, out=) at simple.cpp:24 (gdb) bt Python Exception : Unhandled dwarf expression opcode 0xe1 #0 do_an_addition (a=, b=, out=) at simple.cpp:24 (gdb) continue Continuing. result is 3 warning: Temporarily disabling breakpoints for unloaded shared library "file:///home/smarchi/build/binutils-gdb-amdgpu/gdb/simple#offset=8192&size=67208" [Thread 0x7ffff54bf640 (LWP 1083186) exited] [Thread 0x7ffff5db7640 (LWP 1082911) exited] [Inferior 1 (process 1082907) exited normally] One thing to notice is the host and GPU threads appearing under the same inferior. This is a design goal for us, as programmers tend to think of the threads running on the GPU as part of the same program as the host threads, so showing them in the same inferior in GDB seems natural. Also, the host and GPU threads share a global memory space, which fits the inferior model. Another thing to notice is the error messages when trying to read variables or printing a backtrace. This is expected for the moment, since the AMD GPU compiler produces some DWARF that uses some non-standard extensions: https://llvm.org/docs/AMDGPUDwarfExtensionsForHeterogeneousDebugging.html There were already some patches posted by Zoran Zaric earlier to make GDB support these extensions: https://inbox.sourceware.org/gdb-patches/20211105113849.118800-1-zoran.zaric@amd.com/ We think it's better to get the basic support for AMD GPU in first, which will then give a better justification for GDB to support these extensions. GPU threads are named `AMDGPU Wave`: a wave is essentially a hardware thread using the SIMT (single-instruction, multiple-threads) [3] execution model. GDB uses the amd-dbgapi library [4], included in the ROCm platform, for a few things related to AMD GPU threads debugging. Different components talk to the library, as show on the following diagram: +---------------------------+ +-------------+ +------------------+ | GDB | amd-dbgapi target | <-> | AMD | | Linux kernel | | +-------------------+ | Debugger | +--------+ | | | amdgcn gdbarch | <-> | API | <=> | AMDGPU | | | +-------------------+ | | | driver | | | | solib-rocm | <-> | (dbgapi.so) | +--------+---------+ +---------------------------+ +-------------+ - The amd-dbgapi target is a target_ops implementation used to control execution of GPU threads. While the debugging of host threads works by using the ptrace / wait Linux kernel interface (as usual), control of GPU threads is done through a special interface (dubbed `kfd`) exposed by the `amdgpu` Linux kernel module. GDB doesn't interact directly with `kfd`, but instead goes through the amd-dbgapi library (AMD Debugger API on the diagram). Since it provides execution control, the amd-dbgapi target should normally be a process_stratum_target, not just a target_ops. More on that later. - The amdgcn gdbarch (describing the hardware architecture of the GPU execution units) offloads some requests to the amd-dbgapi library, so that knowledge about the various architectures doesn't need to be duplicated and baked in GDB. This is for example for things like the list of registers. - The solib-rocm component is an solib provider that fetches the list of code objects loaded on the device from the amd-dbgapi library, and makes GDB read their symbols. This is very similar to other solib providers that handle shared libraries, except that here the shared libraries are the pieces of code loaded on the device. Given that Linux host threads are managed by the linux-nat target, and the GPU threads are managed by the amd-dbgapi target, having all threads appear in the same inferior requires the two targets to be in that inferior's target stack. However, there can only be one process_stratum_target in a given target stack, since there can be only one target per slot. To achieve it, we therefore resort the hack^W solution of placing the amd-dbgapi target in the arch_stratum slot of the target stack, on top of the linux-nat target. Doing so allows the amd-dbgapi target to intercept target calls and handle them if they concern GPU threads, and offload to beneath otherwise. See amd_dbgapi_target::fetch_registers for a simple example: void amd_dbgapi_target::fetch_registers (struct regcache *regcache, int regno) { if (!ptid_is_gpu (regcache->ptid ())) { beneath ()->fetch_registers (regcache, regno); return; } // handle it } ptids of GPU threads are crafted with the following pattern: (pid, 1, wave id) Where pid is the inferior's pid and "wave id" is the wave handle handed to us by the amd-dbgapi library (in practice, a monotonically incrementing integer). The idea is that on Linux systems, the combination (pid != 1, lwp == 1) is not possible. lwp == 1 would always belong to the init process, which would also have pid == 1 (and it's improbable for the init process to offload work to the GPU and much less for the user to debug it). We can therefore differentiate GPU and non-GPU ptids this way. See ptid_is_gpu for more details. Note that we believe that this scheme could break down in the context of containers, where the initial process executed in a container has pid 1 (in its own pid namespace). For instance, if you were to execute a ROCm program in a container, then spawn a GDB in that container and attach to the process, it will likely not work. This is a known limitation. A workaround for this is to have a dummy process (like a shell) fork and execute the program of interest. The amd-dbgapi target watches native inferiors, and "attaches" to them using amd_dbgapi_process_attach, which gives it a notifier fd that is registered in the event loop (see enable_amd_dbgapi). Note that this isn't the same "attach" as in PTRACE_ATTACH, but being ptrace-attached is a precondition for amd_dbgapi_process_attach to work. When the debugged process enables the ROCm runtime, the amd-dbgapi target gets notified through that fd, and pushes itself on the target stack of the inferior. The amd-dbgapi target is then able to intercept target_ops calls. If the debugged process disables the ROCm runtime, the amd-dbgapi target unpushes itself from the target stack. This way, the amd-dbgapi target's footprint stays minimal when debugging a process that doesn't use the AMD ROCm platform, it does not intercept target calls. The amd-dbgapi library is found using pkg-config. Since enabling support for the amdgpu architecture (amdgpu-tdep.c) depends on the amd-dbgapi library being present, we have the following logic for the interaction with --target and --enable-targets: - if the user explicitly asks for amdgcn support with --target=amdgcn-*-* or --enable-targets=amdgcn-*-*, we probe for the amd-dbgapi and fail if not found - if the user uses --enable-targets=all, we probe for amd-dbgapi, enable amdgcn support if found, disable amdgcn support if not found - if the user uses --enable-targets=all and --with-amd-dbgapi=yes, we probe for amd-dbgapi, enable amdgcn if found and fail if not found - if the user uses --enable-targets=all and --with-amd-dbgapi=no, we do not probe for amd-dbgapi, disable amdgcn support - otherwise, amd-dbgapi is not probed for and support for amdgcn is not enabled Finally, a simple test is included. It only tests hitting a breakpoint in device code and resuming execution, pretty much like the example shown above. [1] https://docs.amd.com/category/ROCm_v5.4 [2] https://docs.amd.com/bundle/HIP-Programming-Guide-v5.4 [3] https://en.wikipedia.org/wiki/Single_instruction,_multiple_threads [4] https://docs.amd.com/bundle/ROCDebugger-API-Guide-v5.4 Change-Id: I591edca98b8927b1e49e4b0abe4e304765fed9ee Co-Authored-By: Zoran Zaric Co-Authored-By: Laurent Morichetti Co-Authored-By: Tony Tye Co-Authored-By: Lancelot SIX Co-Authored-By: Pedro Alves 2023-02-02 Simon Marchi gdb: make gdb_printing_disassembler::stream public In the ROCm port, we need to access the underlying stream of a gdb_printing_disassembler, so make it public. The reason we need to access it is to know whether it supports style escape code. We then pass that information to a temporary string_file we use while symbolizing addresses. Change-Id: Ib95755a4a45b8f6478787993e9f904df60dd8dc1 Approved-By: Andrew Burgess 2023-02-02 Simon Marchi gdb/solib-svr4: don't disable probes interface if probe not found In ROCm-GDB, we install an solib provider for the GPU code objects on top of the svr4 provider for the host, in order to add solibs representing the GPU code objects to the solib list containing the host process' shared libraries. We override the target_so_ops::handle_event function pointer with our own, in which we call svr4_so_ops.handle_event (which contains svr4_handle_solib_event) manually. When the host (un)loads a library, the ROCm part of handle_event is a no-op. When the GPU (un)loads a code object, we want the host side (svr4) to be a no-op. The problem is that when handle_event is called because of a GPU event, svr4_handle_solib_event gets called while not stopped at an svr4 probe. It then assumes this means there's a problem with the probes interface and disables it through the following sequence of events: - solib_event_probe_at return nullptr - svr4_handle_solib_event returns early - the make_scope_exit callback calls disable_probes_interface We could fix that by making the ROCm handle_event callback check if an svr4 probe is that the stop address, and only call svr4_so_ops.handle_event if so. However, it doesn't feel right to include some svr4 implementation detail in the ROCm event handler. Instead, this patch changes svr4_handle_solib_event to not assume it is an error if called while not at an svr4 probe location, and therefore not disable the probes interface. That just means moving the make_scope_exit call below where we lookup the probe by pc. Change-Id: Ie8ddf5beffa2e92b8ebfdd016454546252519244 Co-Authored-By: Lancelot SIX 2023-02-02 Simon Marchi gdb: add gdbarch_up Add a gdbarch_up unique pointer type, that calls gdbarch_free on deletion. This is used in the ROCm support patch at the end of this series. Change-Id: I4b808892d35d69a590ce83180f41afd91705b2c8 Approved-By: Andrew Burgess 2023-02-02 Simon Marchi gdb: add inferior_pre_detach observable Add an observable notified in target_detach just before calling the detach method on the inferior's target stack. This allows observer to do some work on the inferior while it's still ptrace-attached, in the case of a native Linux inferior. Specifically, the amd-dbgapi target will need it in order to call amd_dbgapi_process_detach before the process gets ptrace-detached. Change-Id: I28b6065e251012a4c2db8a600fe13ba31671e3c9 Approved-By: Andrew Burgess 2023-02-02 Simon Marchi gdbsupport: add type definitions for pid, lwp and tid A following patch will want to declare variables of the same type as some ptid_t components. To make that easy (and avoid harcoding those types everywhere), define some type definitions in the ptid_t struct for each of them. Use them throughout ptid.h. I initially used pid_t, lwp_t and tid_t, but there is the risk of some system defining the pid_t type using a macro instead of a typedef, which would break things. So, use the _type suffix instead. Change-Id: I820b0bea9dafcb4914f1c9ba4bb96b5c666c8dec Approved-By: Andrew Burgess 2023-02-02 Pedro Alves gdb: make install_breakpoint return a non-owning reference A following patch will want to install a breakpoint and then keep a non-owning reference to it. Make install_breakpoint return a non-owning reference, to make that easy. Co-Authored-By: Simon Marchi Change-Id: I2e8106a784021ff276ce251e24708cbdccc2d479 Approved-By: Andrew Burgess 2023-02-02 Lancelot SIX gdb: add supports_arch_info callback to gdbarch_register In the ROCm GDB port, there are some amdgcn architectures known by BFD that we don't actually support in GDB. We don't want gdbarch_printable_names to return these architectures. gdbarch_printable_names is used for a few things: - completion of the "set architecture" command - the gdb.architecture_names function in Python - foreach-arch selftests Add an optional callback to gdbarch_register that is a predicate indicating whether the gdbarch supports the given bfd_arch_info. by default, it is nullptr, meaning that the gdbarch accepts all "mach"s for that architecture known by BFD. Change-Id: I712f94351b0b34ed1f42e5cf7fc7ba051315d860 Co-Authored-By: Simon Marchi Approved-By: Andrew Burgess 2023-02-02 Tom de Vries [gas] Update .loc syntax comment in dwarf2dbg.c I noticed that a comment in gas/dwarf2dbg.c describing .loc syntax was missing the "view VALUE" option. Fix this by adding the missing option. 2023-02-02 Enze Li gdb: remove gdb_indent.sh GDB has been converted to a C++ program for many years[1], and the gdb_indent.sh will not be used any more. Therefore, remove the script as obvious. [1] https://sourceware.org/gdb/wiki/cxx-conversion Approved-By: Simon Marchi 2023-02-02 Indu Bhagat ld/doc: use "stack trace" instead of "unwind" for SFrame SFrame format is meant for generating stack traces only. ld/ * ld.texi: Replace the use of "unwind" with "stack trace". 2023-02-02 Indu Bhagat bfd: use "stack trace" instead of "unwind" for SFrame SFrame format is meant for generating stack traces only. bfd/ * elf-bfd.h: Replace the use of "unwind" with "stack trace". * elf-sframe.c: Likewise. * elf64-x86-64.c: Likewise. * elfxx-x86.c: Likewise. include/ * elf/common.h: Likewise. 2023-02-02 Indu Bhagat gas: use "stack trace" instead of "unwind" for SFrame SFrame format is meant for generating stack traces only. gas/ * as.c: Replace the use of "unwind" with "stack trace". * config/tc-aarch64.c: Likewise. * config/tc-aarch64.h: Likewise. * config/tc-i386.c: Likewise. * config/tc-i386.h: Likewise. * gen-sframe.c: Likewise. * gen-sframe.h: Likewise. * testsuite/gas/cfi-sframe/cfi-sframe-aarch64-2.s: Likewise. * testsuite/gas/cfi-sframe/cfi-sframe-common-8.s: Likewise. * testsuite/gas/cfi-sframe/common-empty-2.s: Likewise. * testsuite/gas/cfi-sframe/common-empty-3.s: Likewise. 2023-02-02 Indu Bhagat sframe: use "stack trace" instead of "unwind" for SFrame SFrame format is meant for generating stack traces only. include/ * sframe.h: Fix comments in the header file. 2023-02-02 Indu Bhagat libsframe/doc: use "stack trace" instead of "unwind" for SFrame SFrame format is meant for generating stack traces only. libsframe/ * doc/sframe-spec.texi: Use "stack trace" instead of "unwind". 2023-02-02 Alan Modra ld-elf/merge test update The merge test fais on numerous targets because they don't support the necessary pc-relative relocs. This patch removes that part of the merge test, and makes references to the merged strings from .data rather than .text to better support targets that relax text by default. 2023-02-02 GDB Administrator Automatic date update in version.in 2023-02-01 Alan Modra obj-elf.h BYTES_IN_WORD Don't define this. It is defined just before elf-bfd.h is included, but doesn't have any relevance there. Instead is for aout64.h where the default is 4 anyway. 2023-02-01 Alan Modra gas obj_end Provide a way for config/obj-* to clean up at end of assembly, and do so for ELF. * obj.h (struct format_ops): Add "end". * config/obj-aout.c (aout_format_ops): Init new field. * config/obj-coff.c (coff_format_ops): Likewise. * config/obj-ecoff.c (ecoff_format_ops): Likewise. * config/obj-elf.c (elf_format_ops): Likewise. (elf_begin): Move later in file. Clear some more variables. (comment_section): Make file scope. (free_section_idx): Rewrite. (elf_adjust_symtab): Expand str_htab_create call and use free_section_idx as delete function. (elf_frob_file_after_relocs): Don't clean up groups.indexes here. (elf_end): New function. * config/obj-elf.h (obj_end): Define. * config/obj-multi.h (obj_end): Define. * output-file.c (output_file_close): Call obj_end. 2023-02-01 Thiago Jung Bauermann gdbserver: Add PID parameter to linux_get_auxv and linux_get_hwcap This patch doesn't change gdbserver behaviour, but after later changes are made it avoids a null pointer dereference when HWCAP needs to be obtained for a specific process while current_thread is nullptr. Fixing linux_read_auxv, linux_get_hwcap and linux_get_hwcap2 to take a PID parameter seems more correct than setting current_thread in one particular code path. Changes are propagated to allow passing the new parameter through the call chain. Approved-By: Simon Marchi 2023-02-01 Thiago Jung Bauermann gdbserver: Add assert in find_register_by_number It helped me during development, catching bugs closer to when they actually happened. Also remove the equivalent gdb_assert in regcache_raw_read_unsigned, since it's checking the same condition a few frames above. Suggested-By: Simon Marchi Approved-By: Simon Marchi 2023-02-01 Andrew Burgess gdb/testsuite: fix fetch_src_and_symbols.exp with native-gdbserver board I noticed that the gdb.debuginfod/fetch_src_and_symbols.exp script doesn't work with the native-gdbserver board, I see this error: ERROR: tcl error sourcing /tmp/build/gdb/testsuite/../../../src/gdb/testsuite/gdb.debuginfod/fetch_src_and_symbols.exp. ERROR: gdbserver does not support run without extended-remote while executing "error "gdbserver does not support $command without extended-remote"" (procedure "gdb_test_multiple" line 51) invoked from within This was introduced with this commit: commit 7dd38e31d67c2548b52bea313ab18e40824c05da Date: Fri Jan 6 18:45:27 2023 -0500 gdb/linespec.c: Fix missing source file during breakpoint re-set The problem is that the above commit introduces a direct use of the "run" command, which doesn't work with 'target remote' targets, as exercised by the native-gdbserver board. To avoid this, in this commit I switch to using runto_main. However, calling runto_main will, by default, delete all the currently set breakpoints. As the point of the above commit was to check that a breakpoint set before stating an inferior would be correctly re-set, we need to avoid this breakpoint deleting behaviour. To do this I make use of with_override, and override the delete_breakpoints proc with a dummy proc which does nothing. By reverting the GDB changes in commit 7dd38e31d67c I have confirmed that even after my changes in this commit, the test still fails. But with the fixes in commit 7dd38e31d67c, this test now passed using the unix, native-gdbserver, and native-extended-gdbserver boards. 2023-02-01 Alexandra Hájková gdb: defer warnings when loading separate debug files Currently, when GDB loads debug information from a separate debug file, there are a couple of warnings that could be produced if things go wrong. In find_separate_debug_file_by_buildid (build-id.c) GDB can give a warning if the separate debug file doesn't include any actual debug information, and in separate_debug_file_exists (symfile.c) we can warn if the CRC checksum in the separate debug file doesn't match the checksum in the original executable. The problem here is that, when looking up debug information, GDB will try several different approaches, lookup by build-id, lookup by debug-link, and then a lookup from debuginfod. GDB can potentially give a warning from an earlier attempt, and then succeed with a later attempt. In the cases I have run into this is primarily a warning about some out of date debug information on my machine, but then GDB finds the correct information using debuginfod. This can be confusing to a user, they will see warnings from GDB when really everything is working just fine. For example: warning: the debug information found in "/usr/lib/debug//lib64/ld-2.32.so.debug" \ does not match "/lib64/ld-linux-x86-64.so.2" (CRC mismatch). This diagnostic was printed on Fedora 33 even when the correct debuginfo was downloaded. In this patch I propose that we defer any warnings related to looking up debug information from a separate debug file. If any of the approaches are successful then GDB will not print any of the warnings. As far as the user is concerned, everything "just worked". Only if GDB completely fails to find any suitable debug information will the warnings be printed. The crc_mismatch test compiles two executables: crc_mismatch and crc_mismatch-2 and then strips them of debuginfo creating separate debug files. The test then replaces crc_mismatch-2.debug with crc_mismatch.debug to trigger "CRC mismatch" warning. A local debuginfod server is setup to supply the correct debug file, now when GDB looks up the debug info no warning is given. The build-id-no-debug-warning.exp is similar to the previous test. It triggers the "separate debug info file has no debug info" warning by replacing the build-id based .debug file with the stripped binary and then loading it to GDB. It then also sets up local debuginfod server with the correct debug file to download to make sure no warnings are emitted. 2023-02-01 Nick Clifton Fix compilation of the assembler with sanitization enabled. * dwarf2dbg.c (emit_inc_line_addr): Use unsigned constants when checking addr_delta. 2023-02-01 Alan Modra Recursion in as_info_where This function has a gas_assert, ie. possible call to as_abort, which calls as_report_context, which calls as_info_where. * messages.c (as_info_where): Don't gas_assert. 2023-02-01 Simon Marchi gdb/dwarf: rename cooked_index_vector to cooked_index See previous patch's commit message for rationale. Change-Id: I6b8cdc045dffccc1c01ed690ff258af09f6ff076 Approved-By: Tom Tromey 2023-02-01 Simon Marchi gdb/dwarf: rename cooked_index to cooked_index_shard I propose to rename cooked_index_vector and cooked_index such that the "main" object, that is the entry point to the index, is called cooked_index. The fact that the cooked index is implemented as a vector of smaller indexes is an implementation detail. This patch renames cooked_index to cooked_index_shard. The following patch renames cooked_index_vector to cooked_index. Change-Id: Id650f97dcb23c48f8409fa0974cd093ca0b75177 Approved-By: Tom Tromey 2023-02-01 Tom de Vries [gas] Emit v2 .debug_line for -gdwarf-2 Currently, when using -gdwarf-2, gas emits a v3 .debug_line contribution. Fix this by emitting a v2 .debug_line contribution instead. gas/ChangeLog: 2023-01-31 Tom de Vries PR 23941 * dwarf2dbg.c (DWARF2_LINE_VERSION): Set to 2 for -gdwarf-2. (DWARF2_LINE_OPCODE_BASE): Handle DWARF2_LINE_VERSION == 2. (dwarf2_directive_loc): Bump dwarf_level when encountering v3 .loc options. (out_debug_line): Don't output v3 standard opcodes for v2. * testsuite/gas/i386/debug1.d: Update. * testsuite/gas/i386/dwarf2-line-1.d: Update. * testsuite/gas/i386/dwarf2-line-4.d: Update. 2023-02-01 GDB Administrator Automatic date update in version.in 2023-01-31 Simon Marchi gdb: add nullptr check to cooked_index_functions::dump Since commit 7d82b08e9e0a ("gdb/dwarf: dump cooked index contents in cooked_index_functions::dump"), we see: maint print objfiles /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.dwarf2/dw2-error/dw2-error^M ^M Object file /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.dwarf2/dw2-error/dw2-error: Objfile at 0x614000005040, bfd at 0x6120000e08c0, 15 minsyms^M ^M Cooked index in use:^M ^M /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/gdb-checked-static-cast.h:58: internal-error: checked_static_cast: Assertion `result != nullptr' failed.^M A problem internal to GDB has been detected,^M further debugging may prove unreliable.^M ----- Backtrace -----^M FAIL: gdb.dwarf2/dw2-error.exp: maint print objfiles /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.dwarf2/dw2-error/dw2-error (GDB internal error) The problem is that when cooked_index_functions fails to build an index, per_objfile->index_table is nullptr. Therefore, add a nullptr check, like other methods of cooked_index_functions already do. Print the "Cooked index in use" message after the nullptr check, such that if the cooked index failed to build, that message is not printed. Change-Id: Id67aef592e76c41b1e3bde9838a4e36cef873253 2023-01-31 Simon Marchi gdbsupport: allow passing nullptr to checked_static_cast Both static_cast and dynamic_cast handle nullptr (they return nullptr), so I think checked_static_cast should too. This will allow doing a null check after a checked_static_cast: cooked_index_vector *table = (gdb::checked_static_cast (per_bfd->index_table.get ())); if (table != nullptr) return; Change-Id: If5c3134e63696f8e417c87b5f3901240c9f7ea97 2023-01-31 Simon Marchi gdb/testsuite: adjust ensure_gdb_index to cooked_index_functions::dump changes Following 7d82b08e9e0a ("gdb/dwarf: dump cooked index contents in cooked_index_functions::dump"), I see some failures like: (gdb) mt print objfiles with-mf^M ^M Object file /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/with-mf/with-mf: Objfile at 0x614000005040, bfd at 0x6120000e08c0, 18 minsyms ^M ^M Cooked index in use:^M ^M ... (gdb) FAIL: gdb.base/with-mf.exp: check if index present This is because the format of the "Cooked index in use" line changed slightly. Adjust ensure_gdb_index to expect the trailing colon. Change-Id: If0a87575c02d8a0bc0d4b8ead540c234c62760f8 2023-01-31 Simon Marchi gdb/testsuite: fix xfail in gdb.ada/ptype_tagged_param.exp I see: ERROR: wrong # args: should be "xfail message" while executing "xfail "no debug info" $gdb_test_name" ("uplevel" body line 3) invoked from within "uplevel { if {!$has_runtime_debug_info} { xfail "no debug info" $gdb_test_name } else { fail $gdb_test_name } }" This is because the xfail takes only one argument, fix that. Change-Id: I2e304d4fd3aa61067c04b5dac2be2ed34dab3190 2023-01-31 Nick Clifton Updated Swedish translation for the binutils sub-directory 2023-01-31 Alan Modra Re: Another fix for EFI generation with LTO enabled Revert 1c66b8a03989 and instead fix the broken list pointer. PR 29998 * pe-dll.c (build_filler_bfd): Revert last change. * ldlang.c (lang_process): When rescanning archives for lto, fix file_chain.tail pointer if the insert point happens to be at the end of the list. 2023-01-31 Andrew Burgess gas/ppc: Additional tests for DFP instructions I noticed that some of the Power6 DFP instructions were not covered by the assembler tests. I've added a new test file which I believe covers all the DFP Power6 instructions. The existing gas/testsuite/gas/ppc/power6.d test is called: POWER6 tests (includes DFP and Altivec) And does cover some of the DFP instructions. But, given the number of additional instructions I'm adding I opted to add a whole new test file. I've left the original power6.d unchanged, so there is now some overlap, but I don't think that should hurt much. 2023-01-31 Jan Beulich RISC-V: make C-extension JAL available again for (32-bit) assembly Along with the normal JAL alias, the C-extension one should have been moved as well by 839189bc932e ("RISC-V: re-arrange opcode table for consistent alias handling"), for the assembler to actually be able to use it where/when possible. Since neither this nor any other compressed branch insn was being tested so far, take the opportunity and introduce a new testcase covering those. 2023-01-31 Alan Modra Silence ubsan warning about 1<<31 * merge.c (hash_blob): Write 1u << 31. 2023-01-31 Alan Modra PR 30060, ASAN error in bfd_cache_close After bfd_close nothing should access bfd memory. Now that bfd_close always tidies up even after an error, attempting to tidy the cached bfd list by calling bfd_cache_close is wrong and not needed. PR 30060 * ar.c (remove_output): Don't call bfd_cache_close. (output_bfd): Delete. * arsup.c (ar_end): Call bfd_close_all_done, not bfd_cache_close. 2023-01-31 Alan Modra testsuite XPASSes This adjusts the testsuite to get rid of a number of XPASSes that have appeared. Someone might like to look into a better patch for the s390 change. aarch64-pe XPASS: weak symbols arm-nacl XPASS: rgn-over8 mcore-pe XPASS: ld-scripts/provide-8 mips64-linux-gnuabi64 XPASS: vers4 mips64-linux-gnuabi64 XPASS: vers4b mips-linux-gnu XPASS: vers4 mips-linux-gnu XPASS: vers4b s390-linux-gnu XPASS: undefined line sh4-linux-gnu XPASS: --gc-sections with __start_SECTIONNAME sh-coff XPASS: objcopy object (simple copy) sh-coff XPASS: objcopy executable (pr25662) binutils/ * testsuite/binutils-all/objcopy.exp: Don't xfail "simple copy" and "pr25662" on sh-*-coff. Remove all non-ELF xfails on "ELF unknown section type" test. ld/ * testsuite/ld-elfvers/vers.exp (vers4, vers4b): Don't xfail all mips, just xfail mips irix. * testsuite/ld-gc/pr19161.d: Don't xfail sh. * testsuite/ld-scripts/rgn-over8-ok.d: Don't xfail nacl. * testsuite/ld-scripts/weak.exp: Don't xfail aarch64-pe. * testsuite/ld-undefined/undefined.exp: Conditionally xfail "undefined line" depending on gcc version for s390. 2023-01-31 GDB Administrator Automatic date update in version.in 2023-01-30 Tom Tromey Remove value_next declaration value_next is declared but not defined. It's long obsolete. This patch removes the stray declaration. 2023-01-30 Simon Marchi gdb: fix dwarf2/cooked-index.c compilation on 32-bit systems The i386 builder shows: ../../binutils-gdb/gdb/dwarf2/cooked-index.c: In member function ‘void cooked_index_vector::dump(gdbarch*) const’: ../../binutils-gdb/gdb/dwarf2/cooked-index.c:492:40: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘std::__underlying_type_impl::type’ {aka ‘long long unsigned int’} [-Werror=format=] 492 | gdb_printf (" DIE offset: 0x%lx\n", | ~~^ | | | long unsigned int | %llx 493 | to_underlying (entry->die_offset)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | std::__underlying_type_impl::type {aka long long unsigned int} The die_offset's underlying type is uint64, so use PRIx64 in the format string. Change-Id: Ibdde4c624ed1bb50eced9a514a4e37aec70a1323 2023-01-30 Mark Wielaard gdb: Replace memcpy with std::copy to avoid some g++ warnings on sparc For some reason g++ 12.2.1 on sparc produces spurious warnings for stringop-overread and restrict in fbsd-tdep.c for a memcpy call. Use std::copy to avoid the warnings: In function ‘void* memcpy(void*, const void*, size_t)’, inlined from ‘gdb::optional > > > fbsd_make_note_desc(target_object, uint32_t)’ at ../../binutils-gdb/gdb/fbsd-tdep.c:666:10: /usr/include/bits/string_fortified.h:29:33: error: ‘void* __builtin_memcpy(void*, const void*, long unsigned int)’ specified bound 18446744073709551612 exceeds maximum object size 9223372036854775807 [-Werror=stringop-overflow=] In function ‘void* memcpy(void*, const void*, size_t)’, inlined from ‘gdb::optional > > > fbsd_make_note_desc(target_object, uint32_t)’ at ../../binutils-gdb/gdb/fbsd-tdep.c:673:10: /usr/include/bits/string_fortified.h:29:33: error: ‘void* __builtin_memcpy(void*, const void*, long unsigned int)’ accessing 18446744073709551612 bytes at offsets 0 and 0 overlaps 9223372036854775801 bytes at offset -9223372036854775805 [-Werror=restrict] gdb/ChangeLog: * fbsd-tdep.c (fbsd_make_note_desc): Use std::copy instead of memcpy. 2023-01-30 Simon Marchi gdb/dwarf: dump cooked index contents in cooked_index_functions::dump As I am investigating a crash I see with the cooked index, I thought it would be useful to have a way to dump the index contents. For those not too familiar with it (that includes me), it can help get a feel of what it contains and how it is structured. The cooked_index_functions::dump function is called as part of the "maintenance print objfiles" command. I tried to make the output well structured and indented to help readability, as this prints a lot of text. The dump function first dumps all cooked index entries, like this: [25] ((cooked_index_entry *) 0x621000121220) name: __ioinit canonical: __ioinit DWARF tag: DW_TAG_variable flags: 0x2 [IS_STATIC] DIE offset: 0x21a4 parent: ((cooked_index_entry *) 0x6210000f9610) [std] Then the information about the main symbol: main: ((cooked_index_entry *) 0x621000123b40) [main] And finally the address map contents: [1] ((addrmap *) 0x6210000f7910) [0x0] ((dwarf2_per_cu_data *) 0) [0x118a] ((dwarf2_per_cu_data *) 0x60c000007f00) [0x1cc7] ((dwarf2_per_cu_data *) 0) [0x1cc8] ((dwarf2_per_cu_data *) 0x60c000007f00) [0x1cdf] ((dwarf2_per_cu_data *) 0) [0x1ce0] ((dwarf2_per_cu_data *) 0x60c000007f00) The display of address maps above could probably be improved, to show it more as ranges, but I think this is a reasonable start. Note that this patch depends on Pedro Alves' patch "enum_flags to_string" [1]. If my patch is to be merged before Pedro's series, I will cherry-pick this patch from his series and merge it before mine. [1] https://inbox.sourceware.org/gdb-patches/20221212203101.1034916-8-pedro@palves.net/ Change-Id: Ida13e479fd4c8d21102ddd732241778bc3b6904a 2023-01-30 Pedro Alves enum_flags to_string This commit introduces shared infrastructure that can be used to implement enum_flags -> to_string functions. With this, if we want to support converting a given enum_flags specialization to string, we just need to implement a function that provides the enumerator->string mapping, like so: enum some_flag { SOME_FLAG1 = 1 << 0, SOME_FLAG2 = 1 << 1, SOME_FLAG3 = 1 << 2, }; DEF_ENUM_FLAGS_TYPE (some_flag, some_flags); static std::string to_string (some_flags flags) { static constexpr some_flags::string_mapping mapping[] = { MAP_ENUM_FLAG (SOME_FLAG1), MAP_ENUM_FLAG (SOME_FLAG2), MAP_ENUM_FLAG (SOME_FLAG3), }; return flags.to_string (mapping); } .. and then to_string(SOME_FLAG2 | SOME_FLAG3) produces a string like "0x6 [SOME_FLAG2 SOME_FLAG3]". If we happen to forget to update the mapping array when we introduce a new enumerator, then the string representation will pretty-print the flags it knows about, and then the leftover flags in hex (one single number). For example, if we had missed mapping SOME_FLAG2 above, we'd end up with: to_string(SOME_FLAG2 | SOME_FLAG3) => "0x6 [SOME_FLAG2 0x4]"); Other than in the unit tests included, no actual usage of the functionality is added in this commit. Approved-By: Simon Marchi Change-Id: I835de43c33d13bc0c95132f42c3f97318b875779 2023-01-30 Tom Tromey Fix comparator bug in cooked index Simon pointed out that the cooked index template-matching patch introduced a failure in libstdc++ debug mode. In particular, the new code violates the assumption of std::lower_bound and std::upper_bound that the range is sorted with respect to the comparison. When I first debugged this, I thought the problem was unfixable as-is and that a second layer of filtering would have to be done. However, on irc, Simon pointed out that it could perhaps be solved if the comparison function were assured that one operand always came from the index, with the other always being the search string. This patch implements this idea. First, a new mode is introduced: a sorting mode for cooked_index_entry::compare. In this mode, strings are compared case-insensitively, but we're careful to always sort '<' before any other printable character. This way, two names like "func" and "func" will be sorted next to each other -- i.e., "func1" will not be seen between them. This is important when searching. Second, the compare function is changed to work in a strcmp-like way. This makes it easier to test and (IMO) understand. Third, the compare function is modified so that in non-sorting modes, the index entry is always the first argument. This allows consistency in compares. I regression tested this in libstdc++ debug mode on x86-64 Fedora 36. It fixes the crash that Simon saw. This is v2. I believe it addresses the review comments, except for the 'enum class' change, as I mentioned in email on the list. Approved-By: Simon Marchi 2023-01-30 Tom Tromey Clean up lnp_state_machine constructor This changes the lnp_state_machine constructor to initialize members directly; and changes lnp_state_machine itself to initialize members inline when possible. Reviewed-By: Lancelot Six 2023-01-30 Tom Tromey Make addrmap const-correct in cooked index After the cooked index is created, the addrmaps should be const. Change-Id: I8234520ab346ced40a8dd6e478ba21fc438c2ba2 2023-01-30 Simon Marchi gdb: provide const-correct versions of addrmap::find and addrmap::foreach Users of addrmap::find and addrmap::foreach that have a const addrmap should ideally receive const pointers to objects, to indicate they should not be modified. However, users that have a non-const addrmap should still receive a non-const pointer. To achieve this, without adding more virtual methods, make the existing find and foreach virtual methods private and prefix them with "do_". Add small non-const and const wrappers for find and foreach. Obviously, the const can be cast away, but if using static_cast instead of C-style casts, then the compiler won't let you cast the const away. I changed all the callers of addrmap::find and addrmap::foreach I could find to make them use static_cast. Change-Id: Ia8e69d022564f80d961413658fe6068edc71a094 2023-01-30 Tom Tromey Use xfail in ptype_tagged_param.exp Pedro pointed out that ptype_tagged_param.exp used a kfail, but an xfail would be more appropriate as the problem appears to be in gcc, not gdb. 2023-01-30 Christina Schimpe gdb: Remove workaround for the vCont packet The workaround for the vCont packet is no longer required due to the former commit "gdb: Make global feature array a per-remote target array". The vCont packet is now checked once when the connection is started and the supported vCont actions are set to the target's remote state attribute. 2023-01-30 Christina Schimpe gdb: Add per-remote target variables for memory read and write config This patch adds per-remote target variables for the configuration of memory read- and write packet size. It is a further change to commit "gdb: Make global feature array a per-remote target array" to apply the fixme notes described in commit 5b6d1e4 "Multi-target support". The former global variables for that configuration are still available to allow the command line configuration for all future remote connections. Similar to the command line configuration of the per- remote target feature array, the commands - set remotewritesize (deprecated) - set remote memory-read-packet-size - set remote memory-write-packet-size will configure the current target (if available). If no target is available, the default configuration for future remote connections is adapted. The show command will display the current remote target's packet size configuration. If no remote target is selected, the default configuration for future connections will be shown. It is required to adapt the test gdb.base/remote.exp which is failing for --target_board=native-extended-gdbserver. With that board GDB connects to gdbserver at gdb start time. Due to this patch two loggings "The target may not be able to.." are shown if the command 'set remote memory-write-packet-size fixed' is executed while a target is connected for the current inferior. To fix this, the clean_restart command is moved to a later time point of the test. It is sufficient to be connected to the server when "runto_main" is executed. Now the connection time is similar to a testrun with --target_board=native-gdbserver. To allow the user to distinguish between the packet-size configuration for future remote connections and for the currently selected target, the commands' loggings are adapted. 2023-01-30 Christina Schimpe gdb: Make global feature array a per-remote target array This patch applies the appropriate FIXME notes described in commit 5b6d1e4 "Multi-target support". "You'll notice that remote.c includes some FIXME notes. These refer to the fact that the global arrays that hold data for the remote packets supported are still globals. For example, if we connect to two different servers/stubs, then each might support different remote protocol features. They might even be different architectures, like e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a host/controller scenario as a single program. That isn't going to work correctly today, because of said globals. I'm leaving fixing that for another pass, since it does not appear to be trivial, and I'd rather land the base work first. It's already useful to be able to debug multiple instances of the same server (e.g., a distributed cluster, where you have full control over the servers installed), so I think as is it's already reasonable incremental progress." Using this patch it is possible to configure per-remote targets' feature packets. Given the following setup for two gdbservers: ~~~~ gdbserver --multi :1234 gdbserver --disable-packet=vCont --multi :2345 ~~~~ Before this patch configuring of range-stepping was not possible for one of two connected remote targets with different support for the vCont packet. As one of the targets supports vCont, it should be possible to configure "set range-stepping". However, the output of GDB looks like: (gdb) target extended-remote :1234 Remote debugging using :1234 (gdb) add-inferior -no-connection [New inferior 2] Added inferior 2 (gdb) inferior 2 [Switching to inferior 2 [] ()] (gdb) target extended-remote :2345 Remote debugging using :2345 (gdb) set range-stepping on warning: Range stepping is not supported by the current target (gdb) inferior 1 [Switching to inferior 1 [] ()] (gdb) set range-stepping on warning: Range stepping is not supported by the current target ~~~~ Two warnings are shown. The warning for inferior 1 should not appear as it is connected to a target supporting the vCont package. ~~~~ (gdb) target extended-remote :1234 Remote debugging using :1234 (gdb) add-inferior -no-connection [New inferior 2] Added inferior 2 (gdb) inferior 2 [Switching to inferior 2 [] ()] (gdb) target extended-remote :2345 Remote debugging using :2345 (gdb) set range-stepping on warning: Range stepping is not supported by the current target (gdb) inferior 1 [Switching to inferior 1 [] ()] (gdb) set range-stepping on (gdb) ~~~~ Now only one warning is shown for inferior 2, which is connected to a target not supporting vCont. The per-remote target feature array is realized by a new class remote_features, which stores the per-remote target array and provides functions to determine supported features of the target. A remote_target object now has a new member of that class. Each time a new remote_target object is initialized, a new per-remote target array is constructed based on the global remote_protocol_packets array. The global array is initialized in the function _initialize_remote and can be configured using the command line. Before this patch the command line configuration affected current targets and future remote targets (due to the global feature array used by all remote targets). This behavior is different and the configuration applies as follows: - If a target is connected, the command line configuration affects the current connection. All other existing remote targets are not affected. - If not connected, the command line configuration affects future connections. The show command displays the current remote target's configuration. If no remote target is selected the default configuration for future connections is shown. If we have for instance the following setup with inferior 2 being selected: ~~~~ (gdb) info inferiors Num Description Connection Executable 1 1 (extended-remote :1234) * 2 2 (extended-remote :2345) ~~~~ Before this patch, if we run 'set remote multiprocess-feature-packet', the following configuration was set: The feature array of all remote targets (in this setup the two connected targets) and all future remote connections are affected. After this patch, it will be configured as follows: The feature array of target with port :2345 which is currently selected will be configured. All other existing remote targets are not affected. The show command 'show remote multiprocess-feature-packet' will display the configuration of target with port :2345. Due to this configuration change, it is required to adapt the test "gdb/testsuite/gdb.multi/multi-target-info-inferiors.exp" to configure the multiprocess-feature-packet before the connections are created. To inform the gdb user about the new behaviour of the 'show remote PACKET-NAME' commands and the new configuration impact for remote targets using the 'set remote PACKET-NAME' commands the commands' outputs are adapted. Due to this change it is required to adapt each test using the set/show remote 'PACKET-NAME' commands. 2023-01-30 GDB Administrator Automatic date update in version.in 2023-01-29 GDB Administrator Automatic date update in version.in 2023-01-28 GDB Administrator Automatic date update in version.in 2023-01-27 Tom Tromey More const-correctness in cooked indexer I noticed that iterating over the index yields non-const cooked_index_entry objects. However, after finalization, they should not be modified. This patch enforces this by adding const where needed. v2 makes the find, all_entries, and wait methods const as well. 2023-01-27 Tom de Vries [gdb/testsuite] Simplify gdb.base/unwind-on-each-insn.exp.tcl Recent commit 1d98e564c97 ("[gdb/testsuite] Add gdb.base/unwind-on-each-insn-{amd64,i386}.exp") broke commit eb015bf86b6 ("[gdb/testsuite] Avoid using .eh_frame in gdb.base/unwind-on-each-insn.exp"), in the sense that gdb.base/unwind-on-each-insn.exp no longer uses -fno-asynchronous-unwind-tables, due to trying to concatenate two lists using: ... lappend srcfile2_flags $nodebug_flags ... which should instead be: ... lappend srcfile2_flags {*}$nodebug_flags ... Fix this by simplifying gdb.base/unwind-on-each-insn.exp.tcl, completely leaving the responsibility to set srcfile_flags and srcfile2_flags to each includer. Tested on x86_64-linux. 2023-01-27 Tom Tromey Invert test in gdb.ada/ptype_tagged_param.exp Simon pointed out that the kfail check in gdb.ada/ptype_tagged_param.exp is inverted. See: https://sourceware.org/pipermail/gdb-patches/2023-January/196296.html This patch fixes the problem. 2023-01-27 Andrew Burgess gdb/tui: more debug output Add some additional debug output that I've found really useful while working on the previous set of patches. Unless tui debug is turned on, then there should be no user visible changes with this commit. 2023-01-27 Andrew Burgess gdb/tui: avoid extra refresh_window on vertical scroll While working on the previous couple of patches I noticed that when I scroll the src and asm windows vertically, I get two refresh_window calls. The two calls can be traced back to tui_source_window_base::update_source_window_as_is, in here we call show_source_content, which calls refresh_window, and then update_exec_info, which also calls refresh_window. In this commit I propose making the refresh_window call in update_exec_info optional. In update_source_window_as_is I'll then call update_exec_info before calling show_source_content, and pass a flag to update_exec_info to defer the refresh. There are places where update_exec_info is used without any subsequent refresh_window call (e.g. when a breakpoint is updated), so update_exec_info does not to call refresh_window in some cases, which is why I'm using a flag to control the refresh. With this changes I'm now only seeing a single refresh_window call for each vertical scroll. There should be no user visible changes after this commit. 2023-01-27 Andrew Burgess gdb/tui: avoid extra refresh_window on horizontal scroll While working on the previous patches I noticed that in some cases I was seeing two calls to tui_source_window_base::refresh_window when scrolling the window horizontally. The two calls would trigger in for the tui-disasm-long-lines.exp test when the pad needed to be refilled. The two called both come from tui_source_window_base::show_source_content. The first call is nested within check_and_display_highlight_if_needed, while the second call is done directly at the end of show_source_content. The check_and_display_highlight_if_needed is being used to draw the window box to the window, this is needed here because show_source_content is what gets called when the window needs updating, e.g. after a resize. We could potentially do the boxing in refresh_window, but then we'd be doing it each time we scroll, even though the box doesn't need changing in this case. However, we can move the check_and_display_highlight_if_needed to be the last thing done in show_source_content, this means that we can rely on the refresh_window call within it to be our single refresh call. There should be no user visible changes after this commit. 2023-01-27 Andrew Burgess gdb/tui: rewrite of tui_source_window_base to handle very long lines This commit addresses an issue that is exposed by the test script gdb.tui/tui-disasm-long-lines.exp, that is, tui_source_window_base does not handle very long lines. The problem can be traced back to the newpad call in tui_source_window_base::show_source_content, this is where we allocate a backing pad to hold the window content. Unfortunately, there appears to be a limit to the size of pad that can be allocated, and the gdb.tui/tui-disasm-long-lines.exp test goes beyond this limit. As a consequence the newpad call fails and returns nullptr. It just so happens that the reset of the tui_source_window_base code can handle the pad being nullptr (this happens anyway when the window is first created, so we already depend on nullptr handling), so all that happens is the source window displays no content. ... well, sort of ... something weird does happen in the command window, we seem to see a whole bunch of blank lines. I've not bothered to track down exactly what's happening there, but it's some consequence of GDB attempting to write content to a WINDOW* that is nullptr. Before explaining my solution, I'll outline how things currently work: Consider we have the following window content to display: aaaaaaaaaa bbbbbbbbbbbbbbbbbbbb ccccccccccccccc the longest line here is 20 characters. If our display window is 10 characters wide, then we will create a pad that is 20 characters wide, and then copy the lines of content into the pad: .--------------------. |aaaaaaaaaa | |bbbbbbbbbbbbbbbbbbbb| |ccccccccccccccc | .--------------------. Now we will copy a 10 character wide view into this pad to the display, our display will then see: .----------. |aaaaaaaaaa| |bbbbbbbbbb| |cccccccccc| .----------. As the user scrolls left and right we adjust m_horizontal_offset and use this to select which part of the pad is copied onto the display. The benefit of this is that we only need to copy the content to the pad once, which includes processing the ansi escape sequences, and then the user can scroll left and right as much as they want relatively cheaply. The problem then, is that if the longest content line is very long, then we try to allocate a very large pad, which can fail. What I propose is that we allow both the pad and the display view to scroll. Once we allow this, then it becomes possible to allocate a pad that is smaller than the longest display line. We then copy part of the content into the pad. As the user scrolls the view left and right GDB will continue to copy content from the pad just as it does right now. But, when the user scrolls to the edge of the pad, GDB will copy a new block of content into the pad, and then update the view as normal. This all works fine so long as the maximum pad size is larger than the current window size - which seems a reasonable restriction, if ncurses can't support a pad of a given size it seems likely it will not support a display window of that size either. If we return to our example above, but this time we assume that the maximum pad size is 15 characters, then initially the pad would be loaded like this: .---------------. |aaaaaaaaaa | |bbbbbbbbbbbbbbb| |ccccccccccccccc| .---------------. Notice that the last 5 characters from the 'b' line are no longer included in the pad. There is still enough content though to fill the 10 character wide display, just as we did before. The pad contents remain unchanged until the user scrolls the display right to this point: .----------. |aaaaa | |bbbbbbbbbb| |cccccccccc| .----------. Now, when the user scrolls right once more GDB spots that the user has reached the end of the pad, and the pad contents are reloaded, like this: .---------------. |aaaaa | |bbbbbbbbbbbbbbb| |cccccccccc | .---------------. The display can now be updated from the pad again just like normal. With this change in place the gdb.tui/tui-disasm-long-lines.exp test now correctly loads the assembler code, and we can scroll around as expected. Most of the changes are pretty mundane, just updating to match the above. One interesting change though is the new member function tui_source_window_base::puts_to_pad_with_skip. This replaces direct calls to tui_puts when copying content to the pad. The content strings contain ansi escape sequences. When these strings are written to the pad these escape sequences are translated into ncurses attribute setting calls. Now however, we sometimes only write a partial string to the pad, skipping some of the leading content. Imagine then that we have a content line like this: "\033[31mABCDEFGHIJKLM\033[0m" Now the escape sequences in this content mean that the actual content (the 'ABCDEFGHIJKLM') will have a red foreground color. If we want to copy this to the pad, but skip the first 3 characters, then what we expect is to have the pad contain 'DEFGHIJKLM', but this text should still have a red foreground color. It is this problem that puts_to_pad_with_skip solves. This function skips some number of printable characters, but processes all the escape sequences. This means that when we do start printing the actual content the content will have the expected attributes. / 2023-01-27 Andrew Burgess gdb/tui: make m_horizontal_offset private I noticed that tui_source_window_base::m_horizontal_offset was protected, but could be made private, so lets do that. This makes more sense in the context of a later commit where I plan to add another member variable that is similar to m_horizontal_offset. The new member variable could also be private. So I had to choose, place the new member variable next to m_horizontal_offset making it protected, but grouping similar variables together, or make m_horizontal_offset private, and then add the new variable as private too. I chose to make m_horizontal_offset private, which is this commit. There should be no user visible changes after this commit. 2023-01-27 Andrew Burgess gdb/tui: disable tui mode when an assert triggers When an assert triggers in tui mode the output is not great, the internal backtrace that is generated is printed directly to the file descriptor for gdb_stderr, and, as a result, does not currently format itself correctly - the output uses only '\n' at the end of each line, and so, when the terminal is in raw mode, the cursor does not return to the start of each line after the '\n'. This is mostly fixable, we could update bt-utils.c to use '\r\n' instead of just '\n', and this would fix most of the problems. The one we can't easily fix is if/when GDB is built to use execinfo instead of libbacktrace, in this case we use backtrace_symbols_fd to print the symbols, and this function only uses '\n' as the line terminator. Fixing this would require switching to backtrace_symbols, but that API uses malloc, which is something we're trying to avoid (this code is called when GDB hits an error, so ideally we don't want to rely on malloc). However, the execinfo code is only used when libbacktrace is not available (or the user specifically disables libbacktrace) so maybe we can ignore that problem... ... but there is another problem. When the backtrace is printed in raw mode, it is possible that the backtrace fills the screen. With the terminal in raw mode we don't have the ability to scroll back, which means we loose some of the backtrace, which isn't ideal. In this commit I propose that we should disable tui mode whenever we handle a fatal signal, or when we hit the internal error code path (e.g. when an assert triggers). With this done then we don't need to update the bt-utils.c code, and the execinfo version of the code (using backtrace_symbols_fd) works just fine. We also get the ability to scroll back to view the error message and all of the backtrace, assuming the users terminal supports scrolling back. The only downside I see with this change is if the tui_disable call itself causes an error for some reason, or, if we handle a single at a time when it is not safe to call tui_disable, in these cases the extra tui_disable call might cause GDB to loose the original error. However, I think (just from personal experience) that the above two issues are pretty rare and the benefits from this change far out weighs the possible drawbacks. 2023-01-27 Andrew Burgess gdb/tui: improve errors from tui focus command This commit improves (I think) the errors from the tui focus command. There are a number of errors that can be triggered by the focus command, they include: (1) Window name "NAME" is ambiguous (2) Unrecognized window name "NAME" (3) Window "NAME" cannot be focused Error (1) is triggered when the user gives a partial window name, and the name matches multiple windows in the current layout. It is worth noting that the ambiguity must be within the current layout; if the partial name matches one window in the current layout, and one or more windows not in the current layout, then this is not ambiguous, and focus will shift to the matching window in the current layout. This error was not previous being tested, but in this commit I make use of the Python API to trigger and test this error. Error (3) is simple enough, and was already being tested. This is triggered by something like 'focus status'. The named window needs to be present in the current layout, and non-focusable in order to trigger the error. Error (2) is what I'd like to improve in this commit. This error triggers if the name the user gives doesn't match any window in the current layout. Even if GDB does know about the window, but the window isn't in the current layout, then GDB will say it doesn't recognize the window name. In this commit I propose to to split this error into three different errors. These will be: (a) Unrecognized window name "NAME" (b) No windows matching "NAME" in the current layout (c) Window "NAME" is not in the current layout Error (a) is the same as before, but will now only trigger if GDB doesn't know about window NAME at all. If the window is known, but not in the current layout then one of the other errors will trigger. Error (b) will trigger if NAME is ambiguous for multiple windows that are not in the current layout. If NAME identifies a single window in the current layout then that window will continue to be selected, just as it currently is. Only in the case where NAME doesn't identify a window in the current layout do we then check all the other known windows, if NAME matches multiple of these, then (b) is triggered. Finally, error (c) is used when NAME uniquely identifies a single window that is not in the current layout. The hope with these new errors is that the user will have a better understanding of what went wrong. Instead of GDB claiming to not know about a window, the mention of the current layout will hint to the user that they should first switch layouts. There are tests included for all the new errors. 2023-01-27 Andrew Burgess gdb/testsuite: fix line feed scrolling in tuiterm.exp In a following commit I managed to trigger the line feed scrolling case in tuiterm.exp. This case is currently unhandled, and this commit fills in this missing functionality. The implementation is pretty simple, just scroll all the content up one line at a time until the cursor is back on the screen (a single line of scroll is all that should be needed). This change is untested in this commit, but is required by the next commit. 2023-01-27 Nick Clifton Another fix for EFI generation with LTO enabled. PR 29998 * pe-dll.c (build_filler_bfd): Initialise the next field of the filler input statement, so that it does not break the file chain. 2023-01-27 Jan Beulich x86: move reg_operands adjustment Ideally we'd do away with this somewhat questionable adjustment (leaving i.types[] untouched). That's non-trivial though as it looks, so only - move the logic into process_operands(), putting it closer to related logic and eliminating a conditional for operand-less insns, - make it consistent (i.e. also affect %xmm0), eliminating an ugly special case later in the function. x86: drop dead SSE2AVX-related code All (there are just two) SSE2AVX templates with %xmm0 as first operand also specify VEX3SOURCES. Hence there's no need for an "else" to the respective if(), and the if() itself can become an assertion. x86: use ModR/M for FPU insns with operands This is the correct way of expressing things; encoding the ModR/M byte directly in base_opcode has always been bogus. x86/Intel: improve special casing of certain insns Now that we have identifiers for the mnemonic strings we can avoid opcode based comparisons, for (in many cases) being more expensive and (in a few cases) being a little fragile and not self-documenting. 2023-01-27 Jan Beulich opcodes: suppress internationalization on build helper tools While one of the two actually having been instrumented (i386-gen.c) now has that instrumentation dropped, there's still no point in honoring such instrumentation in general (i.e. now for ia64-gen.c only), as that only leads to a waste of resources. With CFILES then being merely an alias of LIBOPCODES_CFILES, drop the former variable altogether. 2023-01-27 Jan Beulich x86: remove internationalization from i386-gen.c This is a build time helper utility, which doesn't require translation. 2023-01-27 Alan Modra Call bfd_close_all_done in ld_cleanup This is similar to "Call bfd_close_all_done in output_file_close", but with some code tidying in the pe/pep write_build_id functions. write_build_id is passed the output bfd as its parameter, so there is no need to go looking for the output bfd via link_info (and doing so will no longer work since I clear link_info.output_bfd before calling bfd_close). * emultempl/pe.em (write_build_id): Rename t to td. Formatting. Don't access pe_data(link_info.output_bfd), use td instead. (setup_build_id): Rename t to td. Formatting. * emultempl/pep.em: As for pe.em. * ldmain.c (ld_cleanup): Call bfd_close_all_done on linker bfds. (main): Clear link_info.output_bfd when closing. 2023-01-27 Alan Modra Perform cleanup in bfd_close after errors It seems reasonable to continue after errors in bfd_close_all_done, particularly since bfd_close_all_done is typically called on an output file after we've hit some sort of error elsewhere. The iovec test is necessary if bfd_close_all_done is to work on odd bfd's opened by bfd_create. * opncls.c (bfd_close): Call bfd_close_all_done after errors from _bfd_write_contents. (bfd_close_all_done): Call _bfd_delete_bfd after errors. Don't call iovec->bclose when iovec is NULL. 2023-01-27 Alan Modra Call bfd_close_all_done in output_file_close bfd_cache_close_all is good for closing file descriptors, but doesn't do the cleanup of bfd memory as in bfd_close_all_done. PR 13056 * output-file.c (output_file_close): Call bfd_close_all_done, not bfd_cache_close_all. 2023-01-27 Alan Modra gas macro memory leaks This tidies memory allocated for entries in macro_hash. Freeing the macro name requires a little restructuring of the define_macro interface due to the name being used in the error message, and exposed the fact that the name and other fields were not initialised by the iq2000 backend. There is also a fix for .macro .macro .endm .macro .macro .endm which prior to this patch reported mac.s:1: Warning: attempt to redefine pseudo-op `.macro' ignored mac.s:3: Error: Macro `.macro' was already defined rather than reporting the attempt to redefine twice. * macro.c (macro_del_f): New function. (macro_init): Use it when creating macro_hash. (free_macro): Free macro name too. (define_macro): Return the macro_entry, remove idx, file, line and namep params. Call as_where. Report errors here. Delete macro from macro_hash on attempt to redefined pseudo-op. (delete_macro): Don't call free_macro. * macro.h (define_macro): Update prototype. * read.c (s_macro): Adjust to suit. * config/tc-iq2000.c (iq2000_add_macro): Init all fields of macro_entry. 2023-01-27 Mark Harmstone gas/testsuite: Add -gcodeview test for aarch64-w64-mingw32 This is a copy of the x86 gas -gcodeview test, with changes made for the differing instruction lengths between x86 and aarch64. gas: Add CodeView constant for aarch64 Adds the correct constant to the S_COMPILE3 CodeView record when assembling aarch64-w64-mingw32 with the -gcodeview flag. 2023-01-27 Tom Tromey Use clean_restart in gdb.base Change gdb.base to use clean_restart more consistently. Use clean_restart in gdb.python Change gdb.python to use clean_restart more consistently. Use clean_restart in gdb.cp Change gdb.cp to use clean_restart more consistently. Use clean_restart in gdb.disasm Change gdb.disasm to use clean_restart more consistently. Use clean_restart in gdb.perf Change gdb.perf to use clean_restart more consistently. Use clean_restart in gdb.go Change gdb.go to use clean_restart more consistently. Use clean_restart in gdb.stabs Change gdb.stabs to use clean_restart more consistently. Use clean_restart in gdb.fortran Change gdb.fortran to use clean_restart more consistently. Use clean_restart in gdb.ada Change gdb.ada to use clean_restart more consistently. Use clean_restart in gdb.dwarf2 Change gdb.dwarf2 to use clean_restart more consistently. Use clean_restart in gdb.reverse Change gdb.reverse to use clean_restart more consistently. Use clean_restart in gdb.arch Change gdb.arch to use clean_restart more consistently. Use clean_restart in gdb.guile Change gdb.guile to use clean_restart more consistently. Use clean_restart in gdb.threads Change gdb.threads to use clean_restart more consistently. Use clean_restart in gdb.objc Change gdb.objc to use clean_restart more consistently. Use clean_restart in gdb.trace Change gdb.trace to use clean_restart more consistently. Use clean_restart in gdb.opencl Change gdb.opencl to use clean_restart more consistently. Use clean_restart in gdb.linespec Change gdb.linespec to use clean_restart more consistently. Use clean_restart in gdb.pascal Change gdb.pascal to use clean_restart more consistently. Use mi_clean_restart more This changes a number of MI tests to use mi_clean_restart rather than separate calls. This reduces the number of lines, which is nice, and also provides a nicer model to copy for future tests. Start gdb after building executable in mi-basics.exp A lot of the MI tests start gdb and only then build the executable. This just seemed weird to me, so I've fixed this up. In this patch, no other cleanups are done, the startup is just moved to a more logical (to me) spot. Remove unnecessary call to standard_testfile This test does not build a program and does not need to call standard_testfile. Minor "require" fixups I found a couple of spots that could use "require", and one spot where hoisting the "require" closer to the top of the file made it more clear. 2023-01-27 Tom Tromey Remove some dead code in gdb.fortran/info-types.exp An early "return" in this test case prevents a test from running. This seems to have been intentional and has been in place since: commit d57cbee932f86df06251498daa93154046dc77c0 Author: Andrew Burgess Date: Tue Dec 3 13:18:43 2019 +0000 gdb/testsuite/fortran: Fix info-modules/info-types for gfortran 8+ This patch removes the dead code. 2023-01-27 Tom Tromey Eliminate spurious returns from the test suite A number of tests end with "return". However, this is unnecessary. This patch removes all of these. Use clean_restart in gdb.dlang Change gdb.dlang to use clean_restart more consistently. Use ordinary calling convention for clean_restart clean_restart accepts a single optional argument. Rather than using {args} and handling the argument by hand, change it to use Tcl's own argument-checking. 2023-01-27 GDB Administrator Automatic date update in version.in 2023-01-26 Alan Modra Free gas/dwarf2dbg.c dirs Entries are allocated with xmemdup0. * dwarf2dbg.c (dwarf2_cleanup): Free dirs entries. 2023-01-26 Alan Modra Sanity check dwarf5 form of .file There's a comment a few lines earlier saying that demand_copy_C_string has already reported an error if it returns NULL. Given the proximity I decided not to duplicate the comment. * dwarf2dbg.c (dwarf2_directive_filename): Check return of demand_copy_C_string for file. 2023-01-26 Alan Modra resolve gas shift expressions with large exponents to zero * expr.c (resolve_expression ): Resolve shifts exceeding bits in a valueT to zero. segv in coff_aarch64_addr32nb_reloc * coff-aarch64.c (coff_aarch64_addr32nb_reloc): When output_bfd is NULL (which it is for objdump -W) get the output bfd via the input section. 2023-01-26 Simon Marchi gdb/testsuite: initialize "correct" variable in gdb.cp/cpexprs.exp.tcl Due to a GDB bug (visible when building with -D_GLIBCXX_DEBUG), GDB crashes somewhere in the middle of gdb.cp/cpexprs.exp, and thus fails to read the string, at gdb.cp/cpexprs.exp.tcl:725. The "correct" variable doesn't get set, and I then see this TCL error: ERROR: can't read "correct": no such variable Avoid the TCL error by initializing the "correct" variable to a dummy value. Change-Id: I828968d9b2d105ef47f8da2ef598aa16a518c059 2023-01-26 Simon Marchi gdb/testsuite/dap: fix gdb.dap/basic-dap.exp disassembly test for PIE Prior to this patch, I get: >>> {"seq": 17, "type": "request", "command": "disassemble", "arguments": {"memoryReference": "0x115d", "instructionCount": 1}} Content-Length: 147 {"request_seq": 17, "type": "response", "command": "disassemble", "success": false, "message": "Cannot access memory at address 0x115d", "seq": 41}FAIL: gdb.dap/basic-dap.exp: disassemble one instruction success FAIL: gdb.dap/basic-dap.exp: instructions in disassemble output The problem is that the PC to disassemble is taken from the breakpoint insertion response, which happens before running. With a PIE executable, that PC is unrelocated, but the disassembly request happens after relocation. I chose to fix this by watching for a breakpoint changed event giving the new breakpoint address, and recording the address from there. I think this is an interesting way to fix it, because it adds a bit of test coverage, I don't think these events are checked right now. Other ways to fix it would be: - Get the address by doing a breakpoint insertion after the program is started, or some other way. - Do the disassembly by symbol instead of by address. - Do the disassembly before running the program. Change-Id: I3c396f796ac4c8b22e7dfd2fa1c5467f7a47e84e 2023-01-26 Simon Marchi gdb/testsuite/dap: make dap_wait_for_event_and_check return preceding messages In the following patch, I change gdb.dap/basic-dap.exp such that after waiting for some event, it checks if it received another event meanwhile. To help with this, make dap_wait_for_event_and_check and _dap_dap_wait_for_event return a list with everything received before the event of interest. This is similar to what dap_check_request_and_response returns. Change-Id: I85c8980203a2dec833937e7552c2196bc137935d 2023-01-26 Simon Marchi gdb/testsuite/dap: rename dap_read_event to dap_wait_for_event_and_check I think that name describes a bit better what the proc does, it is similar to "wait_for" in tuiterm.exp. Change-Id: Ie55aa011e6595dd1b5a874db13881ba572ace419 2023-01-26 Simon Marchi gdb/testsuite/dap: pass around dicts instead of TON objects The DAP helper functions generally return TON objects. However, callers almost all immediately use ton::2dict to convert them to dicts, to access their contents. This commits makes things a bit simpler for them by having function return dicts directly instead. The downside is that the TON objects contain type information. For instance, a "2" in a TCL dict could have been the integer 2 or the string "2" in JSON. By converting to TCL dicts, we lose that information. If some tests specifically want to check the types of some fields, I think we can add intermediary functions that return TON objects, without having to complicate other callers who don't care. Change-Id: I2ca47bea355bf459090bae8680c6a917350b5c3f 2023-01-26 Simon Marchi gdb/testsuite/dap: remove catch from dap_read_event This catch didn't cause me any trouble, but for the same reason as the preceding patch, I think it's a bit better to just let any exception propagate, to make for easier debugging. Change-Id: I1779e62c788b77fef2d50434edf4c3d2ec5e1c4c 2023-01-26 Simon Marchi gdb/testsuite/dap: make dap_request_and_response not catch / issue test result Following some of my changes, dap_request_and_response was failing and I didn't know why. I think it's better to make it not catch any exception, and just make it do a simple "send request, read response". If an exception is thrown while sending a request or reading a response, things are going really badly, it's not like we'll want to recover from that and continue the test. Change-Id: I27568d3547f753c3a74e3e5a730d38a8caef9356 2023-01-26 Simon Marchi gdb/testsuite/dap: write requests to gdb.log This helps following what happens when reading gdb.log. The downside is that it becomes harder to tell what text is from GDB and what text is going to GDB, but I think that seeing responses without seeing requests is even more confusing. At least, the lines are prefix with >>>, so when you see this, you know that until the end of the line, it's something that was sent to GDB, and not GDB output. Change-Id: I1ba1acd8b16f4e64686c5ad268cc41082951c874 2023-01-26 Simon Marchi gdb/testsuite/dap: prefix some procs with _ Prefix some procs that are only used internally with an underscore, to make it clear they are internal. If they need to be used by some test later, we can always un-prefix them. Change-Id: Iacb8e77363b5d1f8b98d9ba5a6d115aee5c8925d 2023-01-26 Simon Marchi gdb/testsuite/dap: use gdb_assert in gdb.dap/basic-dap.exp Use gdb_assert instead of manual pass/fail. Change-Id: I71fbc4e37a0a1ef4783056c7424e932651fa397f 2023-01-26 Vladimir Mezentsev gprofng: PR30043 libgprofng.so.* are installed to a wrong location gprofng/ChangeLog 2023-01-25 Vladimir Mezentsev PR gprofng/30043 PR gprofng/28972 * src/Makefile.am: Use lib_LTLIBRARIES instead of pkglib_LTLIBRARIES. * src/Makefile.in: Rebuild. 2023-01-26 Tom de Vries [gdb/testsuite] Add gdb.base/unwind-on-each-insn-{amd64,i386}.exp The gcc 4.4.x (and earlier) compilers had the problem that the unwind info in the epilogue was inaccurate. In order to work around this in gdb, epilogue unwinders were added with a higher priority than the dwarf unwinders in the amd64 and i386 targets: - amd64_epilogue_frame_unwind, and - i386_epilogue_frame_unwind. Subsequently, the epilogue unwind info problem got fixed in gcc 4.5.0. However, the epilogue unwinders prevented gdb from taking advantage of the fixed epilogue unwind info, so the scope of the epilogue unwinders was limited, bailing out for gcc >= 4.5.0. There was no regression test added for this preference scheme, so if we now declare epilogue unwind info from all gcc versions as trusted, no test will start failing. Fix this by adding an amd64 and i386 regression test for this. I have no gcc 4.4.x lying around, so I fabricated the assembly files by: - commenting out some .cfi directives to break the epilogue unwind info, and - hand-editing the producer info to 4.4.7 to activate the fix. Tested on x86_64-linux, target boards unix/{-m64,-m32}. 2023-01-26 Tom de Vries [gdb/testsuite] Add and use is_x86_64_m64_target Add new proc is_x86_64_m64_target and use it where appropriate. Tested on x86_64-linux. 2023-01-26 GDB Administrator Automatic date update in version.in 2023-01-25 Mark Harmstone ld/testsuite: Add missing targets to PDB tests 2023-01-25 Mark Harmstone ld: Add pdb support to aarch64-w64-mingw32 This extends PDB support to the aarch64 PE targets. The changes to the test files are just to make it so they can be assembled as either x86, x86_64, or aarch64, mainly by changing the comment style. The only actual code change here is in adding the architecture constants to pdb.c. 2023-01-25 Torbjörn SVENSSON gdb/arm: Use new dwarf2 function cache This patch resolves the performance issue reported in pr/29738 by caching the values for the stack pointers for the inner frame. By doing so, the impact can be reduced to checking the state and returning the appropriate value. 2023-01-25 Torbjörn SVENSSON gdb: dwarf2 generic implementation for caching function data When there is no dwarf2 data for a register, a function can be called to provide the value of this register. In some situations, it might not be trivial to determine the value to return and it would cause a performance bottleneck to do the computation each time. This patch allows the called function to have a "cache" object that it can use to store some metadata between calls to reduce the performance impact of the complex logic. The cache object is unique for each function and frame, so if there are more than one function pointer stored in the dwarf2_frame_cache->reg array, then the appropriate pointer will be supplied (the type is not known by the dwarf2 implementation). dwarf2_frame_get_fn_data can be used to retrieve the function unique cache object. dwarf2_frame_allocate_fn_data can be used to allocate and retrieve the function unique cache object. 2023-01-25 Tom Tromey Clean up unusual code in mi-cmd-stack.c I noticed some unusual code in mi-cmd-stack.c. This code is a switch, where one of the cases appears in the middle of another block. It seemed cleaner to me to have the earlier case just conditionally fall through. 2023-01-25 H.J. Lu i386: Pass -Wl,--no-as-needed to compiler as needed Pass -Wl,--no-as-needed to linker tests to fix FAIL: Run pr19031 FAIL: Run got1 FAIL: Undefined weak symbol (-fPIE -no-pie) FAIL: Undefined weak symbol (-fPIE -pie) when --as-needed is passed to linker by compiler. PR ld/30050 * testsuite/ld-i386/i386.exp: Pass -Wl,--no-as-needed to compiler as needed. 2023-01-25 Tom Tromey Move target check into allow_altivec_tests Pedro pointed out that only PPC can possibly have altivec, so we can move the target check into allow_altivec_tests. Use require with is_remote This changes some tests to use require with 'is_remote', rather than an explicit test. This adds uniformity helps clean up more spots where a test might exit early without any notification. 2023-01-25 Tom Tromey Add unsupported calls where needed A number of tests will exit early without saying why. This patch adds "unsupported" at spots like this that I could readily find. There are definitely more of these; for example dw2-ranges.exp fails silently because a compilation fails. I didn't attempt to address these as that is a much larger task. 2023-01-25 Tom Tromey Introduce and use is_any_target A few tests work on two different targets that can't be detected with a single call to istarget -- that proc only accepts globs, not regular expressions. This patch introduces a new is_any_target proc and then converts these tests to use it in a 'require'. 2023-01-25 Tom Tromey Use require with istarget This changes many tests to use require when checking 'istarget'. A few of these conversions were already done in earlier patches. No change was needed to 'require' to make this work, due to the way it is written. I think the result looks pretty clear, and it has the bonus of helping to ensure that the reason that a test is skipped is always logged. 2023-01-25 Tom Tromey Rename skip_vsx_tests to allow form This renames skip_vsx_tests to allow_vsx_tests and updates it users to use require. Rename skip_power_isa_3_1_tests to allow form This renames skip_power_isa_3_1_tests to allow_power_isa_3_1_tests and updates its users to use require. Rename skip_float_test to allow form This renames skip_float_test to allow_float_test and updates its users to use require. Convert skip_altivec_tests to allow form This renames skip_altivec_tests to allow_altivec_tests and updates its users to use require. 2023-01-25 Tom de Vries [gdb/testsuite] Fix gdb.base/unwind-on-each-insn.exp for -m32 With test-case gdb.base/unwind-on-each-insn.exp and target board unix/-m32, I now get: ... # of expected passes 25 ... instead of: ... # of expected passes 133 ... as I used to get before commit d25a8dbc7c3 ("[gdb/testsuite] Allow debug srcfile2 in gdb.base/unwind-on-each-insn.exp"), due to the test-case trying to match "rip = " and info frame printing "eip = " instead. Fix this by dropping "rip" from the regexp. Tested on x86_64-linux, target boards unix/{-m64,-m32}. 2023-01-25 Tom de Vries [gdb/testsuite] Allow debug srcfile2 in gdb.base/unwind-on-each-insn.exp Test-case gdb.base/unwind-on-each-insn.exp compiles $srcfile with debug info, and $srcfile2 without. Occasionally, I try both files with debug info: ... - $srcfile $debug_flags $srcfile2 $nodebug_flags]]} { + $srcfile $debug_flags $srcfile2 $debug_flags]]} { ... This shortcuts the test due to no longer recognizing that stepi still lands in foo. Fix this by determining whether still in foo by checking the info frame output. Tested on x86_64-linux. 2023-01-25 Tom de Vries [gdb/testsuite] Allow nodebug srcfile in gdb.base/unwind-on-each-insn.exp Test-case gdb.base/unwind-on-each-insn.exp compiles $srcfile with debug info, and $srcfile2 without. Occasionally, I try both files with debug info: ... - $srcfile $debug_flags $srcfile2 $nodebug_flags]]} { + $srcfile $debug_flags $srcfile2 $debug_flags]]} { ... and both files without: ... - $srcfile $debug_flags $srcfile2 $nodebug_flags]]} { + $srcfile $nodebug_flags $srcfile2 $nodebug_flags]]} { ... In the latter case, I run into: ... FAIL: gdb.base/unwind-on-each-insn.exp: foo: instruction 1: bt 2 FAIL: gdb.base/unwind-on-each-insn.exp: foo: instruction 1: up ... due to a mismatch between the regexp and the different output due to using nodebug. Fix this by making the regexp less strict. Tested on x86_64-linux. 2023-01-25 Felix Willgerodt gdb, i386: Update stale comment in i386-tdep.h. The comment seems no longer valid, the functions technically check for non-pseudo registers, like zmmh. Which is a valid use case. 2023-01-25 Tom de Vries [gdb/testsuite] Analyze non-leaf fn in gdb.base/unwind-on-each-insn.exp In test-case gdb.base/unwind-on-each-insn.exp, we stepi through function foo to check various invariants at each insn, in particular hoping to excercise insns that modify stack and frame pointers. Function foo is a leaf function, so add a non-leaf function bar, and step through it as well (using nexti instead of stepi). With the updated test-case, on powerpc64le-linux, I run into PR tdep/30049: ... FAIL: bar: instruction 5: bt 2 FAIL: bar: instruction 5: up FAIL: bar: instruction 5: [string equal $fid $::main_fid] FAIL: bar: instruction 6: bt 2 FAIL: bar: instruction 6: up FAIL: bar: instruction 6: [string equal $fid $::main_fid] ... Tested on: - x86_64-linux (-m64 and -m32) - s390x-linux (-m64 and -m31) - aarch64-linux - powerpc64le-linux 2023-01-25 Tom de Vries [gdb/testsuite] Improve leaf fn in gdb.base/unwind-on-each-insn.exp In test-case gdb.base/unwind-on-each-insn.exp, we stepi through function foo to check various invariants at each insn, in particular hoping to excercise insns that modify stack and frame pointers. For x86_64-linux, we have a reasonably complex foo (and similar for -m32): ... 4004bc: 55 push %rbp 4004bd: 48 89 e5 mov %rsp,%rbp 4004c0: 90 nop 4004c1: 5d pop %rbp 4004c2: c3 ret ... Both stack pointer (%rsp) and frame pointer (%rbp) are modified. Also for s390x-linux (and similar for -m31): ... 0000000001000668 : 1000668: e3 b0 f0 58 00 24 stg %r11,88(%r15) 100066e: b9 04 00 bf lgr %r11,%r15 1000672: e3 b0 b0 58 00 04 lg %r11,88(%r11) 1000678: 07 fe br %r14 ... Frame pointer (%r11) is modified. Likewise for powerpc64le-linux: ... 00000000100006c8 : 100006c8: f8 ff e1 fb std r31,-8(r1) 100006cc: d1 ff 21 f8 stdu r1,-48(r1) 100006d0: 78 0b 3f 7c mr r31,r1 100006d4: 00 00 00 60 nop 100006d8: 30 00 3f 38 addi r1,r31,48 100006dc: f8 ff e1 eb ld r31,-8(r1) 100006e0: 20 00 80 4e blr ... Both stack pointer (r1) and frame pointer (r31) are modified. But for aarch64-linux, we have: ... 00000000004005fc : 4005fc: d503201f nop 400600: d65f03c0 ret ... There's no insn that modifies stack or frame pointer. Fix this by making foo more complex, adding an (unused) argument: ... 0000000000400604 : 400604: d10043ff sub sp, sp, #0x10 400608: f90007e0 str x0, [sp, #8] 40060c: d503201f nop 400610: 910043ff add sp, sp, #0x10 400614: d65f03c0 ret ... such that the stack pointer (sp) is modified. [ Note btw that we're seeing the effects of -momit-leaf-frame-pointer, with -mno-omit-leaf-frame-pointer we have instead: ... 0000000000400604 : 400604: a9be7bfd stp x29, x30, [sp, #-32]! 400608: 910003fd mov x29, sp 40060c: f9000fa0 str x0, [x29, #24] 400610: d503201f nop 400614: a8c27bfd ldp x29, x30, [sp], #32 400618: d65f03c0 ret ... such that also the frame pointer (x29) is modified. ] Having made foo more complex, we now run into the following fail on x86_64/-m32: ... FAIL: gdb.base/unwind-on-each-insn.exp: instruction 1: $sp_value == $main_sp .... The problem is that the stack pointer has changed inbetween the sampling of main_sp and *foo, in particular by the push insn: ... 804841a: 68 c0 84 04 08 push $0x80484c0 804841f: e8 10 00 00 00 call 8048434 ... Fix this by updating main_sp. On powerpc64le-linux, with gcc 7.5.0 I now run into PR tdep/30021: ... FAIL: gdb.base/unwind-on-each-insn.exp: insn 7: $fba_value == $main_fba FAIL: gdb.base/unwind-on-each-insn.exp: insn 7: [string equal $fid $main_fid] ... but I saw the same failure before this commit with gcc 4.8.5. Tested on: - x86_64-linux (-m64 and -m32) - s390x-linux (-m64 and -m31) - powerpc64le-linux - aarch64-linux Also I've checked that the test-case still functions as regression test for PR record/16678 on x86_64. 2023-01-25 Andrew Burgess gdb/tui: make use of a scoped_restore Make use of a scoped_restore object in tui_mld_read_key instead of doing a manual save/restore. I don't think the existing code can throw an exception, so this is just a cleanup rather than a bug fix. There should be no user visible changes after this commit. 2023-01-25 Andrew Burgess gdb/tui: better filtering of tab completion results for focus command While working on the previous couple of commits, I noticed that the 'focus' command would happily suggest 'status' as a possible focus completion, even though the 'status' window is non-focusable, and, after the previous couple of commits, trying to focus the status window will result in an error. This commit improves the tab-completion results for the focus command so that the status window is not included. 2023-01-25 Andrew Burgess gdb/tui: convert if/error to an assert While working on the previous commit, I realised that there was an error in tui_set_focus_command that could never be triggered. Since the big tui rewrite (adding dynamic layouts) it is no longer true that there is a tui_win_info object for every window at all times. We now only create a tui_win_info object for a particular window, when the window is part of the current layout. As a result, if we have a tui_win_info pointer, then the window must be visible inside tui_set_focus_command (this function calls tui_enable as its first action, which makes the current layout visible). The gdb.tui/tui-focus.exp test script exercises this area of code, and doesn't trigger the assert, nor do any of our other existing tui tests. 2023-01-25 Andrew Burgess gdb/testsuite/tui: more testing of the 'focus' command I noticed that we didn't have many tests of the tui 'focus' command, so I started adding some. This exposed a bug in GDB; we are able to focus windows that should not be focusable, e.g. the 'status' window. This is harmless until we then do 'focus next' or 'focus prev', along this code path we assert that the currently focused window is focusable, which obviously, is not always true, so GDB fails with an assertion error. The fix is simple; add a check to the tui_set_focus_command function to ensure that the selected window is focusable. If it is not then an error is thrown. The new tests I've added cover this case. 2023-01-25 Andrew Burgess gdb/testsuite: update gdb.tui/tui-nl-filtered-output.exp Following on from the previous commit, in this commit I am updating the test script gdb.tui/tui-nl-filtered-output.exp to take account of the changes in commit: commit 9162a27c5f5828240b53379d735679e2a69a9f41 Date: Tue Nov 13 11:59:03 2018 -0700 Change gdb test suite's TERM setting In the above commit the TERM environment variable was changed to be 'dumb' by default, which means that tests, that previously activated tui mode, no longer do unless TERM is set to 'ansi'. As the gdb.tui/tui-nl-filtered-output.exp script didn't do this, the test stopped working. As the expect patterns in this script were pretty generic no tests actually started failing, and we never noticed. In this commit I update the test script to correctly activate our terminal emulator, the test continues to pass after this update, but now we are testing in tui mode. 2023-01-25 Andrew Burgess gdb/testsuite: update gdb.tui/tui-disasm-long-lines.exp Following on from the previous commit, in this commit I am updating the test script gdb.tui/tui-disasm-long-lines.exp to take account of the changes in commit: commit 9162a27c5f5828240b53379d735679e2a69a9f41 Date: Tue Nov 13 11:59:03 2018 -0700 Change gdb test suite's TERM setting In the above commit the TERM environment variable was changed to be 'dumb' by default, which means that tests, that previously activated tui mode, no longer do unless TERM is set to 'ansi'. As the gdb.tui/tui-disasm-long-lines.exp script didn't do this, the test stopped working. As the expect patterns in this script were pretty generic no tests actually started failing, and we never noticed. In this commit I update the script to use Term::clean_restart, which correctly sets TERM to 'ansi'. I've also added a check that the asm box does appear on the screen, which should indicate that tui mode has correctly activated. However, I also notice that GDB doesn't appear to fully work correctly. The test should display the disassembly for the test program, but it doesn't. The test is trying to disassemble some code that (deliberately) uses a very long symbol name, this eventually results in GDB entering tui_source_window_base::show_source_content and trying to allocate an ncurses pad in order to hold the current page of disassembler output. Unfortunately, due to the very long line, the call to newpad fails, meaning that tui_source_window_base::m_pad is nullptr. Luckily non of the following calls appear to crash when passed a nullptr, however, all the output that is written to the pad is lost, which is why we don't see any assembly code written to the screen. As the test history indicates that the script was originally checking for a crash in GDB when the long identifier was encountered, I think there is value in just leaving the test as it is for now, I have a fix for the issue of the newpad call failing, which I'll post in a follow up commit later. 2023-01-25 Andrew Burgess gdb/testsuite: extend gdb.tui/tui-layout.exp test script In passing I noticed that the gdb.tui/tui-layout.exp test script was a little strange, it tests the layout command multiple times, but never sets up our ANSI terminal emulator, so every layout command fails with a message about the terminal lacking the required abilities. It turns out that this was caused by this commit: commit 9162a27c5f5828240b53379d735679e2a69a9f41 Date: Tue Nov 13 11:59:03 2018 -0700 Change gdb test suite's TERM setting This was when we changed the testsuite to set the TERM environment variable to "dumb" by default. After this, any tui test that didn't set the terminal mode back to 'ansi' would fail to activate tui mode. For the tui-layout.exp test it just so happens that the test patterns are generic enough that the test continued to pass, even after this change. In this commit I have updated the test so we now check the layout command both with a 'dumb' terminal and with the 'ansi' terminal. When testing with the 'ansi' terminal, I have some limited validation that GDB correctly entered tui mode. I figured that it is probably worth having at least one test in the test suite that deliberately tries to enter tui mode in a dumb terminal, it would be sad if we one day managed to break GDB such that this caused a crash, and never noticed. 2023-01-25 Andrew Burgess gdb/testsuite: rename test source file to match test script The previous commit touched the source file for the test script gdb.cp/cpcompletion.exp. This source file is called pr9594.cc. The source file is only used by the one test script. This commit renames the source file to cpcompletion.cc to match the test script, this is more inline with how we name source files these days. 2023-01-25 Andrew Burgess gdb/testsuite: use test_gdb_complete_unique more in C++ tests Spotted in gdb.cp/cpcompletion.exp that we could replace some uses of gdb_test with test_gdb_complete_unique, this will extend the completion testing to check tab-completion as well as completion using the 'complete' command in some additional cases. 2023-01-25 GDB Administrator Automatic date update in version.in 2023-01-24 Vladimir Mezentsev gprofng: PR29521 [docs] man pages are not in the release tarball gprofng/ChangeLog 2023-01-20 Vladimir Mezentsev PR gprofng/29521 * configure.ac: Check if $MAKEINFO and $HELP2MAN are missing. * Makefile.am: Build doc if $MAKEINFO exists. * doc/gprofng.texi: Update documentation for gprofng. * doc/Makefile.am: Build gprofng.1. * src/Makefile.am: Move the build of gprofng.1 to doc/Makefile.am. * configure: Rebuild. * Makefile.in: Rebuild. * doc/Makefile.in: Rebuild. * src/Makefile.in: Rebuild. 2023-01-24 Indu Bhagat libsframe/doc: fix some warnings 'make pdf' in libsframe shows some warnings, some of which (especially the Overfull warnings) are causing undesirable effects on the rendered output. Few examples of the warnings: Underfull \hbox (badness 10000) in paragraph at lines 406--407 @texttt pauth_ Underfull \hbox (badness 10000) in paragraph at lines 407--410 @textrm Specify which key is used for signing the return ... Overfull \hbox (2.0987pt too wide) in paragraph at lines 412--413 @texttt fdetype[]| ... Overfull \hbox (28.87212pt too wide) in paragraph at lines 446--447 @textrm SFRAME[]FDE[]TYPE[]PCMASK| ... This patch adjusts column widths of the affected cells to fix a subset of these warnings. For the rest of the warnings, use explicit newline command to fix them. libsframe/ * doc/sframe-spec.texi: Fix various underfull and overfull warnings. 2023-01-24 Nick Clifton Fix seg-fault when generating an empty DLL with LTO enabled. ld PR 29998 * pe-dll.c (generate_reloc): Handle sections with no assigned output section. Terminate early of there are no relocs to put in the .reloc section. (pe_exe_fill_sections): Do not emit an empty .reloc section. bfd * cofflink.c (_bfd_coff_generic_relocate_section): Add an assertion that the output section is set for defined, global symbols. 2023-01-24 Enze Li gdb: some int to bool conversion When building GDB with clang 16, I got this, CXX maint.o maint.c:1045:23: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion] m_space_enabled = 1; ^ ~ maint.c:1057:22: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion] m_time_enabled = 1; ^ ~ maint.c:1073:24: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion] m_symtab_enabled = 1; ^ ~ 3 errors generated. Work around this by using bool bitfields instead. Tested by rebuilding on x86_64-linux with clang 16 and gcc 12. Approved-By: Tom Tromey 2023-01-24 Mark Harmstone ld: Avoid magic numbers for subsystems in pe.em and pep.em 2023-01-24 GDB Administrator Automatic date update in version.in 2023-01-23 Mark Harmstone ld: Set default subsystem for arm-pe to IMAGE_SUBSYSTEM_WINDOWS_GUI This fixes the test failures introduced by 87a5cf5c, by changing the default subsystem for arm-pe from 9 (IMAGE_SUBSYSTEM_WINDOWS_CE_GUI) to 2 (IMAGE_SUBSYSTEM_WINDOWS_GUI), which matches what happens with other PE targets. As far as I can tell there's no working modern Windows CE toolchain knocking about anyway, so this change shouldn't inconvenience anyone. 2023-01-23 Mark Harmstone Add support for secidx relocations to aarch64-w64-mingw32 This patch adds support for the .secidx directive and its corresponding relocation to aarch64-w64-mingw32. As with x86, this is a two-byte LE integer which gets filled in with the 1-based index of the output section that a symbol ends up in. This is needed for PDBs, which represent addresses as a .secrel32, .secidx pair. The test is substantially the same as for amd64, but with changes made for padding and alignment. 2023-01-23 Tom de Vries [gdb/tdep, aarch64] Fix frame address of last insn Consider the test-case test.c, compiled without debug info: ... void foo (const char *s) { } int main (void) { foo ("foo"); return 0; } ... Disassembly of foo: ... 0000000000400564 : 400564: d10043ff sub sp, sp, #0x10 400568: f90007e0 str x0, [sp, #8] 40056c: d503201f nop 400570: 910043ff add sp, sp, #0x10 400574: d65f03c0 ret ... Now, let's do "info frame" at each insn in foo, as well as printing $sp and $x29 (and strip the output of info frame to the first line, for brevity): ... $ gdb -q a.out Reading symbols from a.out... (gdb) b *foo Breakpoint 1 at 0x400564 (gdb) r Starting program: a.out Breakpoint 1, 0x0000000000400564 in foo () (gdb) display /x $sp 1: /x $sp = 0xfffffffff3a0 (gdb) display /x $x29 2: /x $x29 = 0xfffffffff3a0 (gdb) info frame Stack level 0, frame at 0xfffffffff3a0: (gdb) si 0x0000000000400568 in foo () 1: /x $sp = 0xfffffffff390 2: /x $x29 = 0xfffffffff3a0 (gdb) info frame Stack level 0, frame at 0xfffffffff3a0: (gdb) si 0x000000000040056c in foo () 1: /x $sp = 0xfffffffff390 2: /x $x29 = 0xfffffffff3a0 (gdb) info frame Stack level 0, frame at 0xfffffffff3a0: (gdb) si 0x0000000000400570 in foo () 1: /x $sp = 0xfffffffff390 2: /x $x29 = 0xfffffffff3a0 (gdb) info frame Stack level 0, frame at 0xfffffffff3a0: (gdb) si 0x0000000000400574 in foo () 1: /x $sp = 0xfffffffff3a0 2: /x $x29 = 0xfffffffff3a0 (gdb) info frame Stack level 0, frame at 0xfffffffff3b0: pc = 0x400574 in foo; saved pc = 0x40058c (gdb) si 0x000000000040058c in main () 1: /x $sp = 0xfffffffff3a0 2: /x $x29 = 0xfffffffff3a0 ... The "frame at" bit lists 0xfffffffff3a0 except at the last insn, where it lists 0xfffffffff3b0. The frame address is calculated here in aarch64_make_prologue_cache_1: ... unwound_fp = get_frame_register_unsigned (this_frame, cache->framereg); if (unwound_fp == 0) return; cache->prev_sp = unwound_fp + cache->framesize; ... For insns after the prologue, we have cache->framereg == sp and cache->framesize == 16, so unwound_fp + cache->framesize gives the wrong answer once sp has been restored to entry value by the before-last insn. Fix this by detecting the situation that the sp has been restored. This fixes PRs tdep/30010 and tdep/30011. This also fixes the aarch64 FAILs in gdb.reverse/solib-precsave.exp and gdb.reverse/solib-reverse.exp I reported in PR gdb/PR29721. Tested on aarch64-linux. PR tdep/30010 PR tdep/30011 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30010 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30011 2023-01-23 Tom de Vries [gdb/testsuite] Avoid using .eh_frame in gdb.base/unwind-on-each-insn.exp One purpose of the gdb.base/unwind-on-each-insn.exp test-case is to test the architecture-specific unwinders on foo, so unwind-on-each-insn-foo.c is compiled with nodebug, to prevent the dwarf unwinders from taking effect. For for instance gcc x86_64 though, -fasynchronous-unwind-tables is enabled by default, generating an .eh_frame section contribution which might enable the dwarf unwinders and bypass the architecture-specific unwinders. Currently, that happens to be not the case due to the current implementation of epilogue_unwind_valid, which assumes that in absence of debug info proving that the compiler is gcc >= 4.5.0, the .eh_frame contribution is invalid. That may change though, see PR30028, in which case gdb.base/unwind-on-each-insn.exp stops being a regression test for commit 49d7cd733a7 ("Change calculation of frame_id by amd64 epilogue unwinder"). Fix this by making sure that we don't use .eh_frame info regardless of epilogue_unwind_valid, simply by not generating it using -fno-asynchronous-unwind-tables. Tested on x86_64-linux, target boards unix/{-m64,-m32}, using compilers gcc 7.5.0 and clang 13.0.1. 2023-01-23 Nick Clifton Updated Swedish translation for the binutils sub-directory 2023-01-23 Tom de Vries [gdb/testsuite] Simplify gdb.base/unwind-on-each-insn.exp In test-case gdb.base/unwind-on-each-insn.exp, we try to determine the last disassembled insn in function foo. This in it self is fragile, as demonstrated by commit 91836f41e20 ("Powerpc fix for gdb.base/unwind-on-each-insn.exp"). The use of the last disassembled insn in the test-case is to stop stepping in foo once reaching it. However, the intent is to stop stepping just before returning to main. There is no guarantee that the last disassembled insn: - is actually executed - is executed just before returning to main - is executed only once. Fix this by simplying the test-case to continue stepping till stepping out of foo. Tested on x86_64-linux. 2023-01-23 Tom de Vries [gdb/testsuite] Fix untested in gdb.base/frame-view.exp When running test-case gdb.base/frame-view.exp, I see: ... gdb compile failed, ld: frame-view0.o: in function `main': frame-view.c:73: undefined reference to `pthread_create' ld: frame-view.c:76: undefined reference to `pthread_join' collect2: error: ld returned 1 exit status UNTESTED: gdb.base/frame-view.exp: failed to prepare ... Fix this by adding pthreads to the compilation flags. Tested on x86_64-linux. 2023-01-23 Vladislav Khmelevsky Fix objdump --reloc for specific symbol If objdump is used with both --disassemble=symbol and --reloc options skip relocations that have addresses before the symbol, so that they are not displayed. 2023-01-23 GDB Administrator Automatic date update in version.in 2023-01-22 Tom Tromey Remove path name from test The test suite reports several path names in tests. I couldn't find most of these, and I suspect they are false reports, but I did manage to locate one. This one is probably harmless, as I think the path does not vary; but it's also easy to fix and suppress one warning. Minor cleanup in gdb.btrace/enable.exp I noticed a weird-looking bit of code in gdb.btrace/enable.exp that is left over from an earlier change. This patch moves the "!" inside the braces, where it belongs. Minor fixup in allow_aarch64_sve_tests An earlier patch failed to update a string in allow_aarch64_sve_tests. 2023-01-22 GDB Administrator Automatic date update in version.in 2023-01-21 GDB Administrator Automatic date update in version.in 2023-01-20 Simon Marchi gdb: make frame_info_ptr auto-reinflatable This is the second step of making frame_info_ptr automatic, reinflate on demand whenever trying to obtain the wrapper frame_info pointer, either through the get method or operator->. Make the reinflate method private, it is used as a convenience method in those two. Add an "is_null" method, because it is often needed to know whether the frame_info_ptr wraps an frame_info or is empty. Make m_ptr mutable, so that it's possible to reinflate const frame_info_ptr objects. Whether m_ptr is nullptr or not does not change the logical state of the object, because we re-create it on demand. I believe this is the right use case for mutable. Change-Id: Icb0552d0035e227f81eb3c121d8a9bb2f9d25794 Reviewed-By: Bruno Larsen 2023-01-20 Simon Marchi gdb: make frame_info_ptr grab frame level and id on construction This is the first step of making frame_info_ptr automatic. Remove the frame_info_ptr::prepare_reinflate method, move that code to the constructor. Change-Id: I85cdae3ab1c043c70e2702e7fb38e9a4a8a675d8 Reviewed-By: Bruno Larsen 2023-01-20 Simon Marchi gdb: make user-created frames reinflatable This patch teaches frame_info_ptr to reinflate user-created frames (frames created through create_new_frame, with the "select-frame view" command). Before this patch, frame_info_ptr doesn't support reinflating user-created frames, because it currently reinflates by getting the current target frame (for frame 0) or frame_find_by_id (for other frames). To reinflate a user-created frame, we need to call create_new_frame, to make it lookup an existing user-created frame, or otherwise create one. So, in prepare_reinflate, get the frame id even if the frame has level 0, if it is user-created. In reinflate, if the saved frame id is user create it, call create_new_frame. In order to test this, I initially enhanced the gdb.base/frame-view.exp test added by the previous patch by setting a pretty-printer for the type of the function parameters, in which we do an inferior call. This causes print_frame_args to not reinflate its frame (which is a user-created one) properly. On one machine (my Arch Linux one), it properly catches the bug, as the frame is not correctly restored after printing the first parameter, so it messes up the second parameter: frame #0 baz (z1=hahaha, z2=) at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/frame-view.c:40 40 return z1.m + z2.n; (gdb) FAIL: gdb.base/frame-view.exp: with_pretty_printer=true: frame frame #0 baz (z1=hahaha, z2=) at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/frame-view.c:40 40 return z1.m + z2.n; (gdb) FAIL: gdb.base/frame-view.exp: with_pretty_printer=true: frame again However, on another machine (my Ubuntu 22.04 one), it just passes fine, without the appropriate fix. I then thought about writing a selftest for that, it's more reliable. I left the gdb.base/frame-view.exp pretty printer test there, it's already written, and we never know, it might catch some unrelated issue some day. Change-Id: I5849baf77991fc67a15bfce4b5e865a97265b386 Reviewed-By: Bruno Larsen 2023-01-20 Simon Marchi gdb: make it possible to restore selected user-created frames I would like to improve frame_info_ptr to automatically grab the information needed to reinflate a frame, and automatically reinflate it as needed. One thing that is in the way is the fact that some frames can be created out of thin air by the create_new_frame function. These frames are not the fruit of unwinding from the target's current frame. These frames are created by the "select-frame view" command. These frames are not correctly handled by the frame save/restore functions, save_selected_frame, restore_selected_frame and lookup_selected_frame. This can be observed here, using the test included in this patch: $ ./gdb --data-directory=data-directory -nx -q testsuite/outputs/gdb.base/frame-view/frame-view Reading symbols from testsuite/outputs/gdb.base/frame-view/frame-view... (gdb) break thread_func Breakpoint 1 at 0x11a2: file /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/frame-view.c, line 42. (gdb) run Starting program: /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/frame-view/frame-view [Thread debugging using libthread_db enabled] Using host libthread_db library "/usr/lib/../lib/libthread_db.so.1". [New Thread 0x7ffff7cc46c0 (LWP 4171134)] [Switching to Thread 0x7ffff7cc46c0 (LWP 4171134)] Thread 2 "frame-view" hit Breakpoint 1, thread_func (p=0x0) at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/frame-view.c:42 42 foo (11); (gdb) info frame Stack level 0, frame at 0x7ffff7cc3ee0: rip = 0x5555555551a2 in thread_func (/home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/frame-view.c:42); saved rip = 0x7ffff7d4e8fd called by frame at 0x7ffff7cc3f80 source language c. Arglist at 0x7ffff7cc3ed0, args: p=0x0 Locals at 0x7ffff7cc3ed0, Previous frame's sp is 0x7ffff7cc3ee0 Saved registers: rbp at 0x7ffff7cc3ed0, rip at 0x7ffff7cc3ed8 (gdb) thread 1 [Switching to thread 1 (Thread 0x7ffff7cc5740 (LWP 4171122))] #0 0x00007ffff7d4b4b6 in ?? () from /usr/lib/libc.so.6 Here, we create a custom frame for thread 1 (using the stack from thread 2, for convenience): (gdb) select-frame view 0x7ffff7cc3f80 0x5555555551a2 The first calls to "frame" looks good: (gdb) frame #0 thread_func (p=0x7ffff7d4e630) at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/frame-view.c:42 42 foo (11); But not the second one: (gdb) frame #0 0x00007ffff7d4b4b6 in ?? () from /usr/lib/libc.so.6 This second "frame" command shows the current target frame instead of the user-created frame. It's not totally clear how the "select-frame view" feature is expected to behave, especially since it's not tested. I heard accounts that it used to be possible to select a frame like this and do "up" and "down" to navigate the backtrace starting from that frame. The fact that create_new_frame calls frame_unwind_find_by_frame to install the right unwinder suggest that it used to be possible. But that doesn't work today: (gdb) select-frame view 0x7ffff7cc3f80 0x5555555551a2 (gdb) up Initial frame selected; you cannot go up. (gdb) down Bottom (innermost) frame selected; you cannot go down. and "backtrace" always shows the actual thread's backtrace, it ignores the user-created frame: (gdb) bt #0 0x00007ffff7d4b4b6 in ?? () from /usr/lib/libc.so.6 #1 0x00007ffff7d50403 in ?? () from /usr/lib/libc.so.6 #2 0x000055555555521a in main () at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/frame-view.c:56 I don't want to address all the `select-frame view` issues , but I think we can agree that the "frame" command changing the selected frame, as shown above, is a bug. I would expect that command to show the currently selected frame and not change it. This happens because of the scoped_restore_selected_frame object in print_frame_args. The frame information is saved in the constructor (the backtrace below), and restored in the destructor. #0 save_selected_frame (frame_id=0x7ffdc0020ad0, frame_level=0x7ffdc0020af0) at /home/simark/src/binutils-gdb/gdb/frame.c:1682 #1 0x00005631390242f0 in scoped_restore_selected_frame::scoped_restore_selected_frame (this=0x7ffdc0020ad0) at /home/simark/src/binutils-gdb/gdb/frame.c:324 #2 0x000056313993581e in print_frame_args (fp_opts=..., func=0x62100023bde0, frame=..., num=-1, stream=0x60b000000300) at /home/simark/src/binutils-gdb/gdb/stack.c:755 #3 0x000056313993ad49 in print_frame (fp_opts=..., frame=..., print_level=1, print_what=SRC_AND_LOC, print_args=1, sal=...) at /home/simark/src/binutils-gdb/gdb/stack.c:1401 #4 0x000056313993835d in print_frame_info (fp_opts=..., frame=..., print_level=1, print_what=SRC_AND_LOC, print_args=1, set_current_sal=1) at /home/simark/src/binutils-gdb/gdb/stack.c:1126 #5 0x0000563139932e0b in print_stack_frame (frame=..., print_level=1, print_what=SRC_AND_LOC, set_current_sal=1) at /home/simark/src/binutils-gdb/gdb/stack.c:368 #6 0x0000563139932bbe in print_stack_frame_to_uiout (uiout=0x611000016840, frame=..., print_level=1, print_what=SRC_AND_LOC, set_current_sal=1) at /home/simark/src/binutils-gdb/gdb/stack.c:346 #7 0x0000563139b0641e in print_selected_thread_frame (uiout=0x611000016840, selection=...) at /home/simark/src/binutils-gdb/gdb/thread.c:1993 #8 0x0000563139940b7f in frame_command_core (fi=..., ignored=true) at /home/simark/src/binutils-gdb/gdb/stack.c:1871 #9 0x000056313994db9e in frame_command_helper::base_command (arg=0x0, from_tty=1) at /home/simark/src/binutils-gdb/gdb/stack.c:1976 Since the user-created frame has level 0 (identified by the saved level -1), lookup_selected_frame just reselects the target's current frame, and the user-created frame is lost. My goal here is to fix this particular problem. Currently, select_frame does not set selected_frame_id and selected_frame_level for frames with level 0. It leaves them at null_frame_id / -1, indicating to restore_selected_frame to use the target's current frame. User-created frames also have level 0, so add a special case them such that select_frame saves their selected id and level. save_selected_frame does not need any change. Change the assertion in restore_selected_frame that checks `frame_level != 0` to account for the fact that we can restore user-created frames, which have level 0. Finally, change lookup_selected_frame to make it able to re-create user-created frame_info objects from selected_frame_level and selected_frame_id. Add a minimal test case for the case described above, that is the "select-frame view" command followed by the "frame" command twice. In order to have a known stack frame to switch to, the test spawns a second thread, and tells the first thread to use the other thread's top frame. Change-Id: Ifc77848dc465fbd21324b9d44670833e09fe98c7 Reviewed-By: Bruno Larsen 2023-01-20 Simon Marchi gdb: add create_new_frame(frame_id) overload The subsequent patches will need to call create_new_frame with an existing frame_id representing a user created frame. They could call the existing create_new_frame, passing both addresses, but it seems nicer to have a version of the function that takes a frame_id directly. Change-Id: If31025314fec0c3e644703e4391a5ef8079e1a32 Reviewed-By: Bruno Larsen 2023-01-20 Simon Marchi gdb: add user-created frames to stash A subsequent patch makes it possible for frame_info_ptr to reinflate user-created frames. If two frame_info_ptr objects wrapping the same user-created frame_info need to do reinflation, we want them to end up pointing to the same frame_info instance, and not create two separate frame_infos. Otherwise, GDB gets confused down the line, as the state kept in one frame_info object starts differing from the other frame_info. Achieve this by making create_new_frame place the user-created frames in the frame stash. This way, when the second frame_info_ptr does reinflation, it will find the existing frame_info object, created by the other frame_info_ptr, in the frame stash. To make the frame stash differentiate between regular and user-created frame infos which would otherwise be equal, change frame_addr_hash and frame_id::operator== to account for frame_id::user_created_p. I made create_new_frame look up existing frames in the stash, and only create one if it doesn't find one. The goal is to avoid the "select-frame view"/"info frame view"/"frame view" commands from overriding existing entries into the stash, should the user specify the same frame more than once. This will also help in the subsequent patch that makes frame_info_ptr capable of reinflating user-created frames. It will be able to just call create_new_frame and it will do the right thing. Change-Id: I14ba5799012056c007b4992ecb5c7adafd0c2404 Reviewed-By: Bruno Larsen 2023-01-20 Simon Marchi gdb: add frame_id::user_created_p Later in this series, we'll need to differentiate frame ids for regular frames (obtained from the target state and unwinding from it) vs frame ids for user-created frames (created with create_new_frame). Add the frame_id::user_created_p field to indicate a frame is user-created, and set it in create_new_frame. The field is otherwise not used yet, so not changes in behavior are expected. Change-Id: I60de3ce581ed01bf0fddb30dff9bd932840120c3 Reviewed-By: Bruno Larsen 2023-01-20 Simon Marchi gdb: move frame_info_ptr to frame.{c,h} A patch later in this series will make frame_info_ptr access some fields internal to frame_info, which we don't want to expose outside of frame.c. Move the frame_info_ptr class to frame.h, and the definitions to frame.c. Remove frame-info.c and frame-info.h. Change-Id: Ic5949759e6262ea0da6123858702d48fe5673fea Reviewed-By: Bruno Larsen 2023-01-20 Simon Marchi gdb: move call site types to call-site.h I hesitated between putting the file in the dwarf2 directory (as gdb/dwarf2/call-site.h) or in the common directory (as gdb/call-site.h). The concept of call site is not DWARF-specific, another debug info reader could provide this information. But as it is, the implementation is a bit DWARF-specific, as one form it can take is a DWARF expression and parameters can be defined using a DWARF register number. So I ended up choosing to put it under dwarf2/. If another debug info reader ever wants to provide call site information, we can introduce a layer of abstraction between the "common" call site and the "dwarf2" call site. The copyright start year comes from the date `struct call_site` was introduced. Change-Id: I1cd84aa581fbbf729edc91b20f7d7a6e0377014d Reviewed-By: Bruno Larsen 2023-01-20 Simon Marchi gdb: move sect_offset and cu_offset to dwarf2/types.h I want to move the call_site stuff out of gdbtypes.h, to a new header file, to break some cyclic include problem. The call_site stuff uses cu_offset, also defined in gdbtypes.h, so cu_offset also needs to move somewhere else (otherwise, call-site.h will need to include gdbtypes.h, and we are back to square 1). I could move cu_offset to the future new file dwarf2/call-site.h, but it doesn't sound like a good place for it, at cu_offset is not specific to call sites, it's used throughout dwarf2/. So, move it to its own file, dwarf2/types.h. For now, gdbtypes.h includes dwarf2/types.h, but that will be removed once the call site stuff is moved to its own file. Move sect_offset with it too. sect_offset is not a DWARF-specific concept, but for the moment it is only used in dwarf2/. Change-Id: I1fd2a3b7b67dee789c4874244b044bde7db43d8e Reviewed-By: Bruno Larsen 2023-01-20 Simon Marchi gdb: remove language.h include from frame.h This helps resolve some cyclic include problem later in the series. The only language-related thing frame.h needs is enum language, and that is in defs.h. Doing so reveals that a bunch of files were relying on frame.h to include language.h, so fix the fallouts here and there. Change-Id: I178a7efec1953c2d088adb58483bade1f349b705 Reviewed-By: Bruno Larsen 2023-01-20 Simon Marchi gdb: move compile_instance to compile/compile.h struct compile_instance needs to be visible to users, since we use std::unique. language.c and c-lang.c currently includes compile-internal.h for this reason, which kind of defeats the purpose of having an "internal" header file. Change-Id: Iedffe5f1173b3de7bdc1be533ee2a68e6f6c549f Reviewed-By: Bruno Larsen 2023-01-20 Simon Marchi gdb: move type_map_instance to compile/compile.c It's only used in compile/compile.c, it doesn't need to be in a header. Change-Id: Ic5bec996b7b0cd7130055d1e8ff238b5ac4292a3 Reviewed-By: Bruno Larsen 2023-01-20 Indu Bhagat Upload SFrame spec files as well binutils/ * README-how-to-make-a-release: Include sframe-spec html and pdf files. 2023-01-20 Tom Tromey Use bool in pc_in_* functions I noticed that pc_in_unmapped_range had a weird return type -- it was returning a CORE_ADDR but intending to return a bool. This patch changes all the pc_in_* functions to return bool instead. 2023-01-20 Tom Tromey Constify notif_client It seems to me that a notif_client is read-only, so this patch changes the code to use "const" everywhere. 2023-01-20 Simon Marchi gdb: remove struct trad_frame forward declaration I found this forward declaration for a struct that doesn't exist, remove it. Change-Id: Ib9473435a949452160598035e5e0fe19fcdc4d20 2023-01-20 Tom Tromey Make gdb.ada/ptype_tagged_param.exp pass gdb.ada/ptype_tagged_param.exp is failing for me on x86-64 Fedora 36. However, it's actually generating the correct output -- it is just that the test thinks that the "ptype" will not work because I do not have the GNAT debuginfo installed. This patch changes the code to accept either result, and then to issue a kfail as appropriate. 2023-01-20 Simon Marchi gdb/dwarf: fix UBsan crash in read_subrange_type When running gdb.ada/arrayptr.exp (and others) on Ubuntu 22.04, with the `gnat-11` package installed (not `gnat`), with UBSan activated, I get: (gdb) break foo.adb:40 /home/smarchi/src/binutils-gdb/gdb/dwarf2/read.c:17689:20: runtime error: shift exponent 127 is too large for 64-bit type 'long unsigned int' The problematic DIEs are: 0x00001460: DW_TAG_subrange_type DW_AT_lower_bound [DW_FORM_data1] (0x00) DW_AT_upper_bound [DW_FORM_data16] (ffffffffffffffff3f00000000000000) DW_AT_name [DW_FORM_strp] ("foo__packed_array___XP7___XDLU_0__1180591620717411303423") DW_AT_type [DW_FORM_ref4] (0x0000153f "long_long_long_unsigned") DW_AT_GNAT_descriptive_type [DW_FORM_ref4] (0x0000147e) DW_AT_artificial [DW_FORM_flag_present] (true) 0x0000153f: DW_TAG_base_type DW_AT_byte_size [DW_FORM_data1] (0x10) DW_AT_encoding [DW_FORM_data1] (DW_ATE_unsigned) DW_AT_name [DW_FORM_strp] ("long_long_long_unsigned") DW_AT_artificial [DW_FORM_flag_present] (true) When processed by this code: negative_mask = -((ULONGEST) 1 << (base_type->length () * TARGET_CHAR_BIT - 1)); if (low.kind () == PROP_CONST && !base_type->is_unsigned () && (low.const_val () & negative_mask)) low.set_const_val (low.const_val () | negative_mask); When the base type's length (16 bytes in this case) is larger than a ULONGEST (typically 8 bytes), the bit shift is too large. My obvious fix is just to skip the fixup for base types larger than a ULONGEST (8 bytes). I don't think we really handle constant attribute values larger than 8 bytes anyway, so this is part of a much larger problem. Add a test that replicates this situation, but uses bounds that fit in a signed 64 bit, so we get a sensible result. Change-Id: I8d0a24f3edd83b44e0761a0ce38922d3e2e112fb Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29386 2023-01-20 Simon Marchi gdb/testsuite: add test for negative subrange bounds with unsigned form I am looking at this code [1]: /* Normally, the DWARF producers are expected to use a signed constant form (Eg. DW_FORM_sdata) to express negative bounds. But this is unfortunately not always the case, as witnessed with GCC, for instance, where the ambiguous DW_FORM_dataN form is used instead. To work around that ambiguity, we treat the bounds as signed, and thus sign-extend their values, when the base type is signed. */ negative_mask = -((ULONGEST) 1 << (base_type->length () * TARGET_CHAR_BIT - 1)); if (low.kind () == PROP_CONST && !base_type->is_unsigned () && (low.const_val () & negative_mask)) low.set_const_val (low.const_val () | negative_mask); if (high.kind () == PROP_CONST && !base_type->is_unsigned () && (high.const_val () & negative_mask)) high.set_const_val (high.const_val () | negative_mask); Nothing in the testsuite seems to exercise it, as when I remove it, all of gdb.dwarf2 still passes. And tests in other directories would be compiler-dependent, so would rely on having a buggy compiler. Update gdb.dwarf2/subrange.exp to have a test for it. When removing the code above, the new test fails with: ptype array_with_buggy_negative_bounds_type^M type = array [240..244] of signed_byte^M (gdb) FAIL: gdb.dwarf2/subrange.exp: ptype array_with_buggy_negative_bounds_type instead of the expected: ptype array_with_buggy_negative_bounds_type^M type = array [-16..-12] of signed_byte^M (gdb) PASS: gdb.dwarf2/subrange.exp: ptype array_with_buggy_negative_bounds_type [1] https://gitlab.com/gnutools/binutils-gdb/-/blob/5ea14aa4e53fa37f4ba4517497ed2c1e4c60dee2/gdb/dwarf2/read.c#L17681-17695 Change-Id: I1992a3ff0cb1e90fa8a9114dae6c591792f059c2 2023-01-20 Michael Matz Add testcase ld-elf/merge4 to check a situation that once failed with the new section merging when it mishandled offsets pointing into alignment padding in mergable string sections (i.e. pointing to zeros). It made bootstrap.exp fail but that depends on many factors to actually go wrong so this is a more explicit variant of it. 2023-01-20 Michael Matz arm32: Fix rodata-merge-map the test expects a second, but useless, $d mapping symbol for the partially merged section, and specifically disallows one for the completely merged section. The new merging algorithm makes it so that also the partially merged sections are conceptually SEC_EXCLUDED, except the first merge section (e.g. as if the very first object file already contains all strings). So that second mapping symbol is now missing. It never was needed anyway. So, adjust the test. 2023-01-20 Michael Matz Faster string merging * use power-of-two hash table * use better hash function (hashing 32bits at once and with better mixing characteristics) * use input-offset-to-entry maps instead of retaining full input contents for lookup time * don't reread SEC_MERGE section multiple times * care for cache behaviour for the hot lookup routine The overall effect is less usage in libz and much faster string merging itself. On a debug-info-enabled cc1 the effect at the time of this writing on the machine I used was going from 14400 perf samples to 9300 perf samples or from 3.7 seconds to 2.4 seconds, i.e. about 33% . 2023-01-20 Frederic Cambus Add OpenBSD ARM GAS support. 2023-01-20 Jan Beulich x86: split i386-gen's opcode hash entry struct All glibc malloc() implementations I've checked have a smallest allocation size worth of 3 pointers, with an increment worth of 2 pointers. Hence mnemonics with multiple templates can be stored more efficiently when maintaining the shared "name" field only in the actual hash entry. (To express the shared nature, also convert "name" to by pointer-to-const.) While doing the conversation also pull out common code from the involved if/else construct in expand_templates(). 2023-01-20 Jan Beulich x86: embed register and alike names in disassembler Register names are (including their nul terminators) on average almost 4 bytes long. Otoh no register name is longer than 8 bytes. Hence even for 32-bit builds using a pointer is only slightly more space efficient than embedding the strings. A level of indirection can be also avoided by embedding the names as an array of 8 characters directly in the arrays, and the number of base relocations in libopcodes.so (or PIE builds of statically linked executables) goes down as well. To amortize for the otherwise reduced folding of string literals by the linker, use att_names_seg[] in place of string literals in append_seg() and OP_ESreg(). 2023-01-20 Jan Beulich x86: embed register names in reg_entry Register names are (including their nul terminators) on average almost 4 bytes long. Otoh no register name is longer than 7 bytes. Hence even for 32-bit builds using a pointer is only slightly more space efficient than embedding the strings. A level of indirection can be also avoided by embedding the names as an array of 8 characters directly in the struct, and the number of base relocations in PIE builds of gas goes down as well. x86: avoid strcmp() in a few places Now that we have identifiers for the mnemonic strings we can avoid strcmp() in a number of places, comparing the offsets into the mnemonic string table instead. While doing this also - convert a leftover strncmp() to startswith() (apparently an oversight when rebasing the original patch introducing the startswith() uses), - use the new shorthand for current_templates->start also elsewhere in md_assemble() (valid up to the point where match_template() is called). x86: absorb allocation in i386-gen When generating the mnemonic string table we already set up an identifier for the following entry in a number of cases. Re-use that on the next loop iteration rather than re-doing allocation and conversion. x86: re-use insn mnemonic strings as much as possible Compact the mnemonic string table such that the tails of longer mnemonics are re-used for shorter ones, going beyond what compilers would typically do, but matching what ELF linkers may do when processing SHF_MERGE|SHF_STRINGS sections. This reduces table size by about 12.5%. 2023-01-20 Jan Beulich x86: move insn mnemonics to a separate table Using full pointers to reference the insn mnemonic strings is not very efficient. With overall string size presently just slightly over 20k, even a 16-bit value would suffice. Use "unsigned int" for now, as there's no good use we could presently make of the otherwise saved 16 bits. For 64-bit builds this reduces table size by 6.25% (prior to the recent ISA extension additions it would have been 12.5%), with a similar effect on cache occupation of table entries accessed. For PIE builds of gas this also reduces the number of base relocations quite a bit (obviously independent of bitness). 2023-01-20 Jan Beulich x86: abstract out obtaining of a template's mnemonic In preparation for changing the representation of the "name" field introduce a wrapper function. This keeps the mechanical change separate from the functional one. 2023-01-20 GDB Administrator Automatic date update in version.in 2023-01-19 Tom Tromey Use "maint ignore-probes" in no-libstdcxx-probe.exp While looking at some test output, I saw that no-libstdcxx-probe.exp was not being run. However, it occurred to me that Tom de Vries' new "maint ignore-probes" command could be used to enable this test unconditionally. Reviewed-by: Tom de Vries 2023-01-19 Rainer Orth i386: Don't emit unsupported TLS relocs on Solaris Emit R_386_TLS_LE and R_386_TLS_IE, instead of R_386_TLS_LE_32 and R_386_TLS_IE_32, on Solaris. PR ld/13671 * elf32-i386.c (elf_i386_tls_transition): Only emit R_386_TLS_LE, R_386_TLS_IE on Solaris. (elf_i386_relocate_section): Only use R_386_TLS_GD->R_386_TLS_LE transition on Solaris. Co-Authored-By: H.J. Lu 2023-01-19 Andrew Burgess GDB/testsuite: Expand for character string limiting options Modify test cases that verify the operation of the array element limit with character strings such that they are executed twice, once with the `set print characters' option set to `elements' and the limit controlled with the `set print elements' option, and then again with the limit controlled with the `set print characters' option instead. Similarly with the `-elements' and `-characters' options for the `print' command. Additionally verify that said `print' command options combined yield the expected result. Verify correct $_gdb_setting and $_gdb_setting_str values for the `print characters' setting, in particular the `void' value for the `elements' default, which has no corresponding integer value exposed. Add Guile and Python coverage for the `print characters' GDB setting. There are new tests for Ada and Pascal, as the string printing code for these languages is different than the generic string printing code used by other languages. Modula2 also has different string printing code, but (a) this is similar to Pascal, and (b) there are no existing modula2 tests written in Modula2, so I'm not sure how I'd even test the Modula2 string printing. Co-Authored-By: Maciej W. Rozycki Approved-By: Simon Marchi 2023-01-19 Andrew Burgess GDB: Add a character string limiting option This commit splits the `set/show print elements' option into two. We retain `set/show print elements' for controlling how many elements of an array we print, but a new `set/show print characters' setting is added which is used for controlling how many characters of a string are printed. The motivation behind this change is to allow users a finer level of control over how data is printed, reflecting that, although strings can be thought of as arrays of characters, users often want to treat these two things differently. For compatibility reasons by default the `set/show print characters' option is set to `elements', which makes the limit for character strings follow the setting of the `set/show print elements' option, as it used to. Using `set print characters' with any other value makes the limit independent from the `set/show print elements' setting, however it can be restored to the default with the `set print characters elements' command at any time. A corresponding `-characters' option for the `print' command is added, with the same semantics, i.e. one can use `elements' to make a given `print' invocation follow the limit of elements, be it set with the `-elements' option also given with the same invocation or taken from the `set/show print elements' setting, for characters as well regardless of the current setting of the `set/show print characters' option. The GDB changes are all pretty straightforward, just changing references to the old 'print_max' to use a new `get_print_max_chars' helper which figures out which of the two of `print_max' and `print_max_chars' values to use. Likewise, the documentation is just updated to reference the new setting where appropriate. To make people's life easier the message shown by `show print elements' now indicates if the setting also applies to character strings: (gdb) set print characters elements (gdb) show print elements Limit on string chars or array elements to print is 200. (gdb) set print characters unlimited (gdb) show print elements Limit on array elements to print is 200. (gdb) and the help text shows the dependency as well: (gdb) help set print elements Set limit on array elements to print. "unlimited" causes there to be no limit. This setting also applies to string chars when "print characters" is set to "elements". (gdb) In the testsuite there are two minor updates, one to add `-characters' to the list of completions now shown for the `print' command, and a bare minimum pair of checks for the right handling of `set print characters' and `show print characters', copied from the corresponding checks for `set print elements' and `show print elements' respectively. Co-Authored-By: Maciej W. Rozycki Approved-By: Simon Marchi 2023-01-19 Maciej W. Rozycki GDB: Allow arbitrary keywords in integer set commands Rather than just `unlimited' allow the integer set commands (or command options) to define arbitrary keywords for the user to use, removing hardcoded arrangements for the `unlimited' keyword. Remove the confusingly named `var_zinteger', `var_zuinteger' and `var_zuinteger_unlimited' `set'/`show' command variable types redefining them in terms of `var_uinteger', `var_integer' and `var_pinteger', which have the range of [0;UINT_MAX], [INT_MIN;INT_MAX], and [0;INT_MAX] each. Following existing practice `var_pinteger' allows extra negative values to be used, however unlike `var_zuinteger_unlimited' any number of such values can be defined rather than just `-1'. The "p" in `var_pinteger' stands for "positive", for the lack of a more appropriate unambiguous letter, even though 0 obviously is not positive; "n" would be confusing as to whether it stands for "non-negative" or "negative". Add a new structure, `literal_def', the entries of which define extra keywords allowed for a command and numerical values they correspond to. Those values are not verified against the basic range supported by the underlying variable type, allowing extra values to be allowed outside that range, which may or may not be individually made visible to the user. An optional value translation is possible with the structure to follow the existing practice for some commands where user-entered 0 is internally translated to UINT_MAX or INT_MAX. Such translation can now be arbitrary. Literals defined by this structure are automatically used for completion as necessary. So for example: const literal_def integer_unlimited_literals[] = { { "unlimited", INT_MAX, 0 }, { nullptr } }; defines an extra `unlimited' keyword and a user-visible 0 value, both of which get translated to INT_MAX for the setting to be used with. Similarly: const literal_def zuinteger_unlimited_literals[] = { { "unlimited", -1, -1 }, { nullptr } }; defines the same keyword and a corresponding user-visible -1 value that is used for the requested setting. If the last member were omitted (or set to `{}') here, then only the keyword would be allowed for the user to enter and while -1 would still be used internally trying to enter it as a part of a command would result in an "integer -1 out of range" error. Use said error message in all cases (citing the invalid value requested) replacing "only -1 is allowed to set as unlimited" previously used for `var_zuinteger_unlimited' settings only rather than propagating it to `var_pinteger' type. It could only be used for the specific case where a single extra `unlimited' keyword was defined standing for -1 and the use of numeric equivalents is discouraged anyway as it is for historical reasons only that they expose GDB internals, confusingly different across variable types. Similarly update the "must be >= -1" Guile error message. Redefine Guile and Python parameter types in terms of the new variable types and interpret extra keywords as Scheme keywords and Python strings used to communicate corresponding parameter values. Do not add a new PARAM_INTEGER Guile parameter type, however do handle the `var_integer' variable type now, permitting existing parameters defined by GDB proper, such as `listsize', to be accessed from Scheme code. With these changes in place it should be trivial for a Scheme or Python programmer to expand the syntax of the `make-parameter' command and the `gdb.Parameter' class initializer to have arbitrary extra literals along with their internal representation supplied. Update the testsuite accordingly. Approved-By: Simon Marchi 2023-01-19 Indu Bhagat libsframe: Use AM_SILENT_RULES macro in configure.ac Silence 'make' by default. libsframe/ * configure.ac: Use AM_SILENT_RULES. * configure: Regenerate. 2023-01-19 Tom Tromey Remove some unused includes I noticed a few spots that include gnu-stabs.h but that do not need to. This patch removes these unnecessary includes. Tested by rebuilding. 2023-01-19 Tom de Vries [gdb/tdep, aarch64] Remove fp and sp reg aliases, add x31 reg alias In aarch64-tdep.c we find these register aliases: ... { /* 64-bit register names. */ {"fp", AARCH64_FP_REGNUM}, {"lr", AARCH64_LR_REGNUM}, {"sp", AARCH64_SP_REGNUM}, ... The sp alias is superfluous, because the canonical name of x31 is already sp. The fp alias is superfluous, because it's already taken by the default meaning of fp, assigned here in _initialize_frame_reg: ... user_reg_add_builtin ("fp", value_of_builtin_frame_fp_reg, NULL); ... Fix this by removing the fp and sp aliases. While we're at it, add an x31 alias for sp. Approved-By: Luis Machado Tested on aarch64-linux. PR tdep/30012 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30012 2023-01-19 Tom de Vries [gdb/testsuite] Fix gdb.python/py-value-cc.exp for big endian On s390x-linux, I run into: ... (gdb) python print(u[u_fields[0]])^M 99^M (gdb) PASS: gdb.python/py-value-cc.exp: u's first field via field python print(u[u_fields[1]])^M 0 '\000'^M (gdb) FAIL: gdb.python/py-value-cc.exp: u's second field via field ... There's a var u of this type: ... union U { int a; char c; }; ... and after assigning 99 to u.a, the test-case expects u.c to contain 99 (which it does on x86_64), but instead it contains 0. Fix this by instead assigning 0x63636363, to ensure that u.c == 99 for both little and big endian. Tested on x86_64-linux and s390x-linux. 2023-01-19 Alan Modra Reinitialise macro_nest * input-scrub.c (input_scrub_begin): Init macro_nest. 2023-01-19 Alan Modra PR 30022, concurrent builds can fail So let's not copy .libs/libbfd.a to libbfd.a now that nothing in the binutils-gdb source tries to link against it. PR 30022 * Makefile.am (noinst_LIBRARIES, libbfd_a_SOURCES, stamp-lib), (libbfd.a): Delete rules. (CLEANFILES): Adjust to suit. 2023-01-19 Indu Bhagat toplevel: Makefile.def: add install-strip dependency on libsframe As noted in PR libsframe/30014 - FTBFS: install-strip fails because bfdlib relinks and fails to find libsframe, the install time dependencies of libbfd need to be updated. PR libsframe/30014 * Makefile.def: Reflect that libsframe needs to installed before libbfd. Reorder a bit to better track libsframe dependencies. * Makefile.in: Regenerate. 2023-01-19 Alan Modra The fuzzers have found the reloc special functions in coff-aarch64.c All of them need a bfd_reloc_offset_in_range check before accessing data + reloc_entry->address. This patch adds the missing checks and sanity checks reloc offsets in coff_pe_aarch64_relocate_section too. All of them also need changing to support objdump -W calls to bfd_simple_get_relocated_section_contents. At least, secrel_reloc needs the support, the others might not be present in dwarf debug sections. * coff-aarch64.c (coff_aarch64_rel21_reloc): Range check reloc offset. Support final-linking. (coff_aarch64_po12l_reloc): Likewise. (coff_aarch64_addr32nb_reloc): Likewise. (coff_aarch64_secrel_reloc): Likewise. (coff_pe_aarch64_relocate_section): Range check reloc offset. 2023-01-19 Alan Modra Correct coff-aarch64 howtos and delete unnecessary special functions The remaining special functions are still broken except when called by gas bfd_install_relocation. * coff-aarch64.c (coff_aarch64_addr64_reloc), (coff_aarch64_addr32_reloc, coff_aarch64_branch26_reloc), (coff_aarch64_branch19_reloc, coff_aarch64_branch14_reloc), (coff_aarch64_po12a_reloc): Delete. (HOWTO_INSTALL_ADDEND): Define as 1. (HOW): Remove pcrel_off. Correct all the howtos. (CALC_ADDEND): Define. (coff_aarch64_rtype_to_howto): New function. (coff_rtype_to_howto): Define. 2023-01-19 Alan Modra coff-aarch64.c howtos This is just a patch to fix overlong lines. Wrapping the HOWTO macro in a new HOW macro helps in this. No functional changes here. * coff-aarch64.c (HOW): Define and use for reloc howtos. 2023-01-19 Alan Modra howto install_addend This adds a new flag to the reloc howtos that can be used to incrementally change targets over to simple bfd_install_relocation that just installs the addend without any weird adjustments. I've made a few other changes to bfd_install_relocation, removing dead code and comments that are really only applicable to bfd_perform_relocation. There is also a reloc offset bounds check change. I've moved the check to where data is accessed, as it seems reasonable to me to not perform the check unless it is needed. There is precedence for this; Relocations against absolute symbols already avoided the check. I also tried always performing the reloc offset check, and ran into testsuite failures due to _NONE and _ALIGN relocs at the end of sections. These likely would be fixed if all such reloc howtos had size set to zero, but I would rather not edit lots of files when it involves checking that target code does not use the size. * reloc.c (struct reloc_howto_struct): Add install_addend. (HOWTO_INSTALL_ADDEND): Define. (HOWTO): Init new field with HOWTO_INSTALL_ADDEND. (bfd_install_relocation): Remove comments copied from bfd_perform_relocation that aren't applicable here. Remove code dealing with output_offset and output_section. Just set relocation to addend if install_addend. Move reloc offset bounds check to just before section data is accessed, avoiding the check when data is not accessed. * bfd-in2.h: Regenerate. 2023-01-19 Mike Frysinger sim: info: convert verbose field to a bool The verbose argument has always been an int treated as a bool, so convert it to an explicit bool. Further, update the API docs to match the reality that the verbose value is actually used by some of the internal modules. sim: unify sim-signal.o building Now that sim-main.h has been reduced significantly, we can remove it from sim-signal.c and unify it across all boards since it compiles to the same code. sim: v850: reduce extra header inclusion to igen files Limit these extra header includes to only when specific igen files include us until we can move the includes to the igen fils directly. sim: v850: drop redundant define This is already in v850/local.mk, so we can drop it from sim-main.h. 2023-01-19 Mark Wielaard sim: mn10300: minimize mn10300-sim.h include in sim-main.h sim-main.h is special since it is one of the files automatically included in igen generated files. But this means anything including sim-main.h might get everything included just for the igen files. To prevent clashing symbols/defines only include sim-fpu.h, sim-signal.h, mn10300-sim.h from sim-main.h if it is included from one of the generated igen C files. Add explicit includes of mn10300-sim.h, sim-fpu.h and/or sim-signal.h to dv-mn103cpu.c, interp.c and op_utils.c. 2023-01-19 GDB Administrator Automatic date update in version.in 2023-01-18 Maciej W. Rozycki GDB: Add references to erased args in cli-decode.c Complement commit 1d7fe7f01b93 ("gdb: Introduce setting construct within cmd_list_element") and commit 702991711a91 ("gdb: Have setter and getter callbacks for settings") and update inline documentation accordingly for `add_set_or_show_cmd' and `add_setshow_cmd_full_erased', documenting the `args' parameter and removing references to `var', `set_setting_func' and `get_setting_func'. Approved-By: Simon Marchi 2023-01-18 Maciej W. Rozycki GDB: Add missing inline documentation for `add_setshow_cmd_full' Complement commit 1d7fe7f01b93 ("gdb: Introduce setting construct within cmd_list_element") and add missing description for `add_setshow_cmd_full'. GDB: Correct inline documentation for `add_setshow_cmd_full_erased' Use proper English in the description of SET_LIST and SHOW_LIST. 2023-01-18 Maciej W. Rozycki GDB: Fix documentation for `theclass' parameters in cli-decode.c Rename CLASS to THECLASS in the documentation for `theclass' parameters throughout cli-decode.c, complementing commit fe978cb071b4 ("C++ keyword cleanliness, mostly auto-generated"). Approved-By: Simon Marchi 2023-01-18 Tom Tromey Fix 'make TAGS' in gdbserver PR build/29003 points out that "make TAGS" is broken in gdbserver. This patch fixes the problem that is pointed out there, plus another one I noticed while working on that -- namely that the "sed" computes the wrong names for some source files. Finally, a couple of obsolete variable references are removed. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29003 2023-01-18 Carl Love Revert "X86: reverse-finish fix" This reverts commit b22548ddb30bfb167708e82d3bb932461c1b703a. This patch is being reverted since the patch series is causing regressions. 2023-01-18 Carl Love Revert "PowerPC: fix for gdb.reverse/finish-precsave.exp and gdb.reverse/finish-reverse.exp" This reverts commit 92e07580db6a5572573d5177ca23933064158f89. Reverting patch as the patch series is causing regressions. 2023-01-18 Jan Vrany gdb: care for dynamic objfiles in build_id_bfd_get () Accessing gdb.Objfile.build_id caused GDB to crash when objfile is dynamic, that is created by JIT reader API. The issue was NULL-pointer dereferencing in build_id_bfd_get () because dynamic objfiles have no underlaying BFD structure. This commit fixes the problem by a NULL-check in build_id_bfd_get (). 2023-01-18 Nick Clifton Speed up objcopy's note merging. PR 29993 * objcopy.c (merge_gnu_build_notes): Remember the last non-deleted note in order to speed up the scan for matching notes. 2023-01-18 Mike Frysinger sim: ppc: drop local psim link This has never been installed, and it's not clear anyone cares about it in the local build dir (when the main program is sim/ppc/run), so drop all the logic to simplify. 2023-01-18 Mark Harmstone Use subsystem to distinguish between pei-arm-little and pei-arm-wince-little Running objdump against a 32-bit ARM PE file currently needs disambiguation, as it gets picked up by both pei-arm-little and pei-arm-wince-little. This adds a check in pe_bfd_object_p so that the subsystem in the PE header is used to do the disambiguation for us, so that WinCE images get assigned to pei-arm-wince-little, and everything else to pei-arm-little. 2023-01-18 Vladimir Mezentsev Revert "gprofng: PR29987 bfd/archive.c:1447: undefined reference to `filename_ncmp'" This reverts commit c2a5d74050ea9d7897b4122ef57c627d395683b3. 2023-01-18 GDB Administrator Automatic date update in version.in 2023-01-17 Tom Tromey Remove two unused fields from gdbarch When I converted gdbarch to use the registry, I forgot to remove the two fields that were used to implement the previous approach. This patch removes them. Tested by rebuilding. Use require in paramless.exp The new paramless.exp test was not converted to the new "require" approach. This patch fixes the problem. 2023-01-17 Carl Love PowerPC: fix for gdb.reverse/finish-precsave.exp and gdb.reverse/finish-reverse.exp PR record/29927 - reverse-finish requires two reverse next instructions to reach previous source line PowerPC uses two entry points called the local entry point (LEP) and the global entry point (GEP). Normally the LEP is used when calling a function. However, if the table of contents (TOC) value in register 2 is not valid the GEP is called to setup the TOC before execution continues at the LEP. When executing in reverse, the function finish_backward sets the break point at the alternate entry point (GEP). However if the forward execution enters via the normal entry point (LEP), the reverse execution never sees the break point at the GEP of the function. Reverse execution continues until the next break point is encountered or the end of the recorded log is reached causing gdb to stop at the wrong place. This patch adds a new address to struct execution_control_state to hold the address of the alternate function start address, known as the GEP on PowerPC. The finish_backwards function is updated. If the stopping point is between the two entry points (the LEP and GEP on PowerPC), the stepping range is set to execute back to the alternate entry point (GEP on PowerPC). Otherwise, a breakpoint is inserted at the normal entry point (LEP on PowerPC). Function process_event_stop_test checks uses a stepping range to stop execution in the caller at the first instruction of the source code line. Note, on systems that only support one entry point, the address of the two entry points are the same. Test finish-reverse-next.exp is updated to include tests for the reverse-finish command when the function is entered via the normal entry point (i.e. the LEP) and the alternate entry point (i.e. the GEP). The patch has been tested on X86 and PowerPC with no regressions. 2023-01-17 Carl Love X86: reverse-finish fix PR record/29927 - reverse-finish requires two reverse next instructions to reach previous source line Currently on X86, when executing the finish command in reverse, gdb does a single step from the first instruction in the callee to get back to the caller. GDB stops on the last instruction in the source code line where the call was made. When stopped at the last instruction of the source code line, a reverse next or step command will stop at the first instruction of the same source code line thus requiring two step/next commands to reach the previous source code line. It should only require one step/next command to reach the previous source code line. By contrast, a reverse next or step command from the first line in a function stops at the first instruction in the source code line where the call was made. This patch fixes the reverse finish command so it will stop at the first instruction of the source line where the function call was made. The behavior on X86 for the reverse-finish command now matches doing a reverse-next from the beginning of the function. The proceed_to_finish flag in struct thread_control_state is no longer used. This patch removes the declaration, initialization and setting of the flag. This patch requires a number of regression tests to be updated. Test gdb.mi/mi-reverse.exp no longer needs to execute two steps to get to the previous line. The gdb output for tests gdb.reverse/until-precsave.exp and gdb.reverse/until-reverse.exp changed slightly. The expected result in tests gdb.reverse/amd64-failcall-reverse.exp and gdb.reverse/singlejmp-reverse.exp are updated to the correct expected result. This patch adds a new test gdb.reverse/finish-reverse-next.exp to test the reverse-finish command when returning from the entry point and from the body of the function. The step_until proceedure in test gdb.reverse/step-indirect-call-thunk.exp was moved to lib/gdb.exp and renamed cmd_until. The patch has been tested on X86 and PowerPC to verify no additional regression failures occured. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29927 2023-01-17 Simon Marchi gdb/testsuite: expect SIGSEGV from top GDB spawn id When testing with the native-extended-gdbserver, I get: Thread 1 "xgdb" received signal SIGSEGV, Segmentation fault. 0x00007ffff6d828f2 in GC_find_limit_with_bound () from /usr/lib/x86_64-linux-gnu/libgc.so.1 (gdb) FAIL: gdb.gdb/selftest.exp: xgdb is at prompt This is because the -re that is supposed to match this SIGSEGV is after `-i $inferior_spawn_id`. On native, the top and bottom GDB are on the same spawn id, so it ends up working. But with a gdbserver board, that's not the case. Move the SIGSEGV -re before the `-i $inferior_spawn_id` line, such that it matches what the top GDB outputs. Do the same fix in gdb.gdb/python-helper.exp. Change-Id: I3291630e218a5a3a6a47805b999ddbc9b968c927 Approved-By: Tom Tromey 2023-01-17 Tom Tromey Fix parameter-less template regression in new DWARF reader PR c++/29896 points out a regression in the new DWARF reader. It does not properly handle a case like "break fn", where "fn" is a template function. This happens because the new index uses strncasecmp to compare. However, to make this work correctly, we need a custom function that ignores template parameters. This patch adds a custom comparison function and fixes the bug. A new test case is included. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29896 2023-01-17 Tom Tromey Move hash_entry and eq_entry into cooked_index::do_finalize I was briefly confused by the hash_entry and eq_entry functions in the cooked index. They are only needed in a single method, and that method already has a couple of local lambdas for a different hash table. So, it seemed cleaner to move these there as well. Don't erase empty indices in DWARF reader The DWARF reader has some code to remove empty indices. However, I think this code has been obsolete since some earlier changes to parallel_for_each. This patch removes this code. Avoid submitting empty tasks in parallel_for_each I found that parallel_for_each would submit empty tasks to the thread pool. For example, this can happen if the number of tasks is smaller than the number of available threads. In the DWARF reader, this resulted in the cooked index containing empty sub-indices. This patch arranges to instead shrink the result vector and process the trailing entries in the calling thread. 2023-01-17 Stam Markianos-Wright gas: arm: Change warning message to not reference specific A-class architecture revision We noticed that a warning message about the use of scalar fp16 instructions being UNPREDICTABLE when conditionalized in an IT block referenced the specific A-class architecture revision ARMv8.2-A. Many of these instructions are now also part of ARMv8.1-M, so the warning message had become misleading. Here we just change the message to not specify an architecture revision at all and update all testing accordingly. This was done with a simple find-n-replace within the binutils sources. No tests have regressed for the arm target. gas/ChangeLog: * config/tc-arm.c (do_scalar_fp16_v82_encode): Remove ARMv8.2-A from the warning message. (do_neon_movhf): Likewise * testsuite/gas/arm/armv8-2-fp16-scalar-bad.l: Likewise * testsuite/gas/arm/mve-vaddsub-it-bad.l: Likewise * testsuite/gas/arm/mve-vcvtne-it-bad.l: Likewise * testsuite/gas/arm/mve-vcvtne-it.d: Likewise 2023-01-17 Stam Markianos-Wright gas: arm: Fix a further IT-predicated vcvt issue in the presense of MVE vcvtn Previously we had experienced issues with assembling a "VCVTNE" instruction in the presence of the MVE architecture extension, because it could be interpreted both as: * The base instruction VCVT + NE for IT predication when inside an IT block. * The MVE instruction VCVTN + E in the Else of a VPT block. Given a C reproducer of: ``` int test_function(float value) { int ret_val = 10; if (value != 0.0) { ret_val = (int) value; } return ret_val; } ``` GCC generates a VCVTNE instruction based on the `truncsisf2_vfp` pattern, which will look like: `vcvtne.s32.f32 s-reg, s-reg` This still triggers an error due to being misidentified as "vcvtn+e" Similar errors were found with other type combinations and instruction patterns (these have all been added to the testing of this patch). This class of errors was previously worked around by: https://sourceware.org/pipermail/binutils/2020-August/112728.html which addressed this by looking at the operand types, however, that isn't adequate to cover all the extra cases that have been found. Instead, we add some special-casing logic earlier when the instructions are parsed that is conditional on whether we are in a VPT block or not, when the instruction is parsed. gas/ChangeLog: * config/tc-arm.c (opcode_lookup): Add special vcvtn handling. * testsuite/gas/arm/mve-vcvtne-it-bad.l: Add further testing. * testsuite/gas/arm/mve-vcvtne-it-bad.s: Likewise. * testsuite/gas/arm/mve-vcvtne-it.d: Likewise. * testsuite/gas/arm/mve-vcvtne-it.s: Likewise. 2023-01-17 Nick Clifton Fix snafu in previous delta for elf32-csky.c 2023-01-17 Xianmiao Qu C-SKY: Fix machine flag. * elf32-csky.c (elf32_csky_merge_attributes): Don't save and restore the ARCH attribute, it will actually clear the ARCH attribute. (csky_elf_merge_private_bfd_data): Store the machine flag correctly. 2023-01-17 GDB Administrator Automatic date update in version.in 2023-01-16 Enze Li libctf: update regexp to allow makeinfo to build document While trying to build gdb on latest openSUSE Tumbleweed, I noticed the following warning, checking for makeinfo... makeinfo --split-size=5000000 configure: WARNING: *** Makeinfo is too old. Info documentation will not be built. then I checked the version of makeinfo, it said, ====== $ makeinfo --version texi2any (GNU texinfo) 7.0.1 Copyright (C) 2022 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. ====== After digging a little bit, it became quite obvious that a dot is missing in regexp that makes it impossible to match versions higher than 7.0, and here's the solution: - | egrep 'texinfo[^0-9]*(6\.[3-9]|[7-9][0-9])' >/dev/null 2>&1; then + | egrep 'texinfo[^0-9]*(6\.[3-9]|[7-9]\.[0-9])' >/dev/null 2>&1; then However, Eli pointed out that the solution above has another problem: it will stop working when Texinfo 10.1 will be released. Meanwhile, he suggested to solve this problem permanently. That is, we don't care about the minor version for Texinfo > 6.9, we only care about the major version. In this way, the problem will be resolved permanently, thanks to Eli. libctf/ChangeLog: * configure: Regenerated. * configure.ac: Update regexp to match versions higher than 7.0. 2023-01-16 Alan Modra Correct ld-pe/aarch64.d test output "foo" is at 0x2010. This corrects the expected output for .long and .word referencing foo, showing a problem with relocation handling. * testsuite/ld-pe/aarch64.d: Correct expected output. 2023-01-16 Alan Modra Tidy gas/expr.c static state * expr.c (seen, nr_seen): Make file scope. (expr_begin): Clear seen, nr_seen, and expr_symbol_lines. (expr_end): New function. * expr.h (expr_end): Declare. * output-file.c (output_file_close): Call expr_end. * config/tc-hppa.c (expr_end): Rename to expr_parse_end. * config/tc-mips.c: Likewise. * config/tc-riscv.c: Likewise. * config/tc-sparc.c: Likewise. Leftover hack from i960-coff * reloc.c (bfd_perform_relocation, bfd_install_relocation): Remove i960-coff target hack. 2023-01-16 Alan Modra COFF CALC_ADDEND comment Old COFF (and AOUT) targets have unusual relocation addends. * coffcode.h (): Describe COFF addends. 2023-01-16 Alan Modra PR29991, MicroMIPS flag erased after align directives PR 29991 * config/tc-mips.c (s_align): Call file_mips_check_options and mips_mark_labels. * testsuite/gas/mips/align-after-label.s, * testsuite/gas/mips/mips-align-after-label.d, * testsuite/gas/mips/micromips-align-after-label.d: New test. * testsuite/gas/mips/mips.exp: Run it. 2023-01-16 Nick Clifton Update release making howto Updated translations for the gas and binutils sub-directories 2023-01-16 Mike Frysinger sim: assume sys/stat.h always exists (via gnulib) We have many uses of sys/stat.h that are unprotected by HAVE_SYS_STAT_H, so this is more formalizing the reality that we require this header. Since we switched to gnulib, it guarantees that a sys/stat.h exists for us to include, so we're doubly OK. sim: formally assume unistd.h always exists (via gnulib) We have many uses of unistd.h that are unprotected by HAVE_UNISTD_H, so this is more formalizing the reality that we require this header. Since we switched to gnulib, it guarantees that a unistd.h exists for us to include, so we're doubly OK. sim: build: stop probing system extensions (ourselves) This logic was added in order to expose the strsignal prototype for nrun.c. Since then, we've migrated to gnulib as our portability layer, and it takes care of probing system extensions for us, so there's no need to duplicate the work. 2023-01-16 Mike Frysinger sim: modules.c: fix generation after recent refactors Add explicit arch-specific modules.c rules to keep the build from generating an incorrect common/modules.c. Otherwise the pattern rules would cascade such that it'd look for $arch/modules.o which turned into common/modules.c which triggered the gen rule. My local testing of this code didn't catch this bug because of how Automake manages .Po (dependency files) in incremental builds -- it was adding extra rules that override the pattern rules which caused the build to generate correct modules.c files. But when building from a cold cache, the pattern rules would force common/modules.c to be used leading to crashes at runtime. 2023-01-16 GDB Administrator Automatic date update in version.in 2023-01-15 Mark Wielaard sim: microblaze, mn10300: remove signal.h include in interp.c signal.h isn't needed in microblaze and mn10300 interp.c so don't include it. 2023-01-15 Mike Frysinger sim: m32r: fix typos in stamp depends Copying & pasting the first rule missed updating the dep to the right stamp file. sim: igen: simplify build logic a little Now that all ports (that use igen) build in the top-level and depend on igen, we can move the conditional logic out of configure. We also switch from noinst_LIBRARIES to EXTRA_LIBRARIES so that the library is only built when needed (i.e. the igen tool is used). sim: build: drop depdir subdir hack Now that all the ports compile some C files in their arch dirs, Automake guarantees creating the depdir for us, so we can drop our configure hack. sim: common: simplify modules.c deps Now that all ports (other than ppc) build in the top-level, we don't need to expand all the modules.c targets as a recursive dep. Each port depends on their respective file now, and the ppc port doesn't use it at all. sim: common: move modules.c to source tracking This makes sure the arch-specific modules.c wildcard is matched and not the common/%.c so that we compile it correctly. It also makes sure each subdir has depdir logic enabled. sim: common: move libcommon.a dep to ppc code Rather than force this to be built ahead of time for all targets, move the dep to the ppc code since it's the only user of it now. sim: build: drop most recursive build deps Now that we build these objects in the top dir & generate modules.c there, we don't need to generate them all first -- we can let the normal dependency graph take care of building things in parallel. sim: common: move libcommon.a objects to sources This simplifies the build logic and avoids an Automake bug where the common_libcommon_a_OBJECTS variable isn't set in the arch libsim.a DEPENDENCIES for targets that, alphabetically, come before "common". We aren't affected by that bug with the current code, but as we move things out of SIM_ALL_RECURSIVE_DEPS and rely on finer dependencies, we will trip over it. sim: igen: simplify build dep Now that all ports (other than ppc) build in the top-level, we don't need to mark the igen tool as a recursive dep. Each port depends on the tool if it actually uses it, and ppc doesn't use it at all. sim: common: simplify hw-config.h deps Now that all ports (other than ppc) build in the top-level, we don't need to expand all the hw-config.h targets as a recursive dep. Each port depends on their respective header now, and the ppc port doesn't use it at all. sim: build: drop AM_MAKEFLAGS settings We don't have any recursive builds anymore, so we can drop this logic. 2023-01-15 GDB Administrator Automatic date update in version.in 2023-01-14 Tom Tromey Pass internal gdb flags to --configuration invocations The test suite uses the --configuration flag to feature-test gdb. However, when I added this, I neglected to pass the internal gdbflags to this, causing an error, which then caused failures in the test suite (which would not be seen if you'd ever run "make install"). This patch fixes the bug. Tested by removing my install tree first, to verify that I could reproduce the failure. 2023-01-14 Nick Clifton Update how-to-make-a-release file now that the 2.40 release is out 2023-01-14 GDB Administrator Automatic date update in version.in 2023-01-13 Mike Frysinger sim: build: delete Make-common.in logic Now that all (other than ppc) build in the top-level, this logic is unused, so punt it all. 2023-01-13 Tom Tromey Rename to allow_tui_tests This changes skip_tui_tests to invert the sense, and renames it to allow_tui_tests. It also rewrites this function to use the output of "gdb --configuration", and it adds a note about the state of the TUI to that output. Rename to allow_guile_tests This changes skip_guile_tests to invert the sense, and renames it to allow_guile_tests. It also rewrites this proc to check the output of "gdb --configuration", as was done for Python. Then it changes the code to use "require" where possible. Rename to allow_hw_breakpoint_tests This changes skip_hw_breakpoint_tests to invert the sense, and renames it to allow_hw_breakpoint_tests. This also converts some tests to use "require" -- I missed this particular check in the first series. Rename to allow_tsx_tests This changes skip_tsx_tests to invert the sense, and renames it to allow_tsx_tests. Rename to allow_shlib_tests This changes skip_shlib_tests to invert the sense, and renames it to allow_shlib_tests. Rename to allow_rust_tests This changes skip_rust_tests to invert the sense, and renames it to allow_rust_tests. Rename to allow_python_tests This changes skip_python_tests to invert the sense, and renames it to allow_python_tests. Rename to allow_perf_tests This changes skip_perf_tests to invert the sense, and renames it to allow_perf_tests. Rename to allow_opencl_tests This changes skip_opencl_tests to invert the sense, and renames it to allow_opencl_tests. Rename to allow_ifunc_tests This changes skip_ifunc_tests to invert the sense, and renames it to allow_ifunc_tests. Rename to allow_hw_watchpoint_tests This changes skip_hw_watchpoint_tests to invert the sense, and renames it to allow_hw_watchpoint_tests. Rename to allow_hw_watchpoint_multi_tests This changes skip_hw_watchpoint_multi_tests to invert the sense, and renames it to allow_hw_watchpoint_multi_tests. Rename to allow_hw_watchpoint_access_tests This changes skip_hw_watchpoint_access_tests to invert the sense, and renames it to allow_hw_watchpoint_access_tests. Rename to allow_go_tests This changes skip_go_tests to invert the sense, and renames it to allow_go_tests. Rename to allow_gdbserver_tests This changes skip_gdbserver_tests to invert the sense, and renames it to allow_gdbserver_tests. Rename to allow_fortran_tests This changes skip_fortran_tests to invert the sense, and renames it to allow_fortran_tests. Rename to allow_d_tests This changes skip_d_tests to invert the sense, and renames it to allow_d_tests. Rename to allow_dlmopen_tests This changes skip_dlmopen_tests to invert the sense, and renames it to allow_dlmopen_tests. Rename to allow_debuginfod_tests This changes skip_debuginfod_tests to invert the sense, and renames it to allow_debuginfod_tests. Rename to allow_ctf_tests This changes skip_ctf_tests to invert the sense, and renames it to allow_ctf_tests. Rename to allow_cplus_tests and allow_stl_tests This changes skip_cplus_tests to invert the sense, and renames it to allow_cplus_tests. This one also converts skip_stl_tests to allow_stl_tests, as that was convenient to do at the same time. Rename to allow_btrace_tests This changes skip_btrace_tests to invert the sense, and renames it to allow_btrace_tests. Rename to allow_btrace_pt_tests This changes skip_btrace_pt_tests to invert the sense, and renames it to allow_btrace_pt_tests. Rename to allow_avx512fp16_tests This changes skip_avx512fp16_tests to invert the sense, and renames it to allow_avx512fp16_tests. Rename to allow_avx512bf16_tests This changes skip_avx512bf16_tests to invert the sense, and renames it to allow_avx512bf16_tests. Rename to allow_ada_tests This changes skip_ada_tests to invert the sense, and renames it to allow_ada_tests. Rename to allow_aarch64_sve_tests This changes skip_aarch64_sve_tests to invert the sense, and renames it to allow_aarch64_sve_tests. Rename to allow_xml_test This changes gdb_skip_xml_test to invert the sense, and renames it to allow_xml_test. Use "require" for Python tests This changes various tests to use "require" for the Python feature. 2023-01-13 Tom Tromey Fix latent bug in default_prompt_gdb_start default_prompt_gdb_start mimics default_gdb_start, but does not set the use_gdb_stub global. This caused one Python test to work only because it used the ordinary gdb_start before later using default_prompt_gdb_start. This patch updates default_prompt_gdb_start to set this global as well. 2023-01-13 Tom Tromey Remove mi_skip_python_tests mi_skip_python_tests was necessary because skip_python_tests used the running gdb, and so needed to know what prompt to expect. Now that skip_python_tests has been rewritten, mi_skip_python_tests is no longer needed. Rewrite skip_python_tests This rewrites skip_python_tests to examine the output of "gdb --configuration". This is a bit nicer because it does not require an already-running gdb. Use require gnat_runtime_has_debug_info This changes some tests to use "require gnat_runtime_has_debug_info". Use require !skip_debuginfod_tests This changes some tests to use "require !skip_debuginfod_tests". Use require using_fission This changes some tests to use "require using_fission". Use require target_can_use_run_cmd This changes some tests to use "require target_can_use_run_cmd". Use require !skip_opencl_tests This changes some tests to use "require !skip_opencl_tests". Use require !skip_perf_tests This changes some tests to use "require !skip_perf_tests". Use require gdb_trace_common_supports_arch This changes some tests to use "require gdb_trace_common_supports_arch". Use require gdb_skip_xml_test This changes some tests to use "require gdb_skip_xml_test". Use require !gdb_debug_enabled This changes some tests to use "require !gdb_debug_enabled". Use require is_c_compiler_gcc This changes some tests to use "require is_c_compiler_gcc". Use require !skip_shlib_tests This changes some tests to use "require !skip_shlib_tests". This patch cleans up a few spots that were missed in the earlier patch. Use require !skip_gdbserver_tests This changes some tests to use "require !skip_gdbserver_tests". Use require isnative This changes some tests to use "require isnative". Use require can_spawn_for_attach This changes some tests to use "require can_spawn_for_attach". Use require !use_gdb_stub This changes some tests to use "require !use_gdb_stub". Use require support_go_compile This changes some tests to use "require support_go_compile". Use require supports_get_siginfo_type This changes some tests to use "require supports_get_siginfo_type". Use require can_single_step_to_signal_handler This changes some tests to use "require can_single_step_to_signal_handler". Use require is_elf_target This changes some tests to use "require is_elf_target". Use require is_amd64_regs_target This changes some tests to use "require is_amd64_regs_target". Use require is_aarch32_target This changes some tests to use "require is_aarch32_target". Use require is_aarch64_target This changes some tests to use "require is_aarch64_target". Use require support_displaced_stepping This changes some tests to use "require support_displaced_stepping". Use require !skip_avx_* This changes some tests to use "require" with !skip_avx_*. Use require !skip_btrace_tests This changes some tests to use "require !skip_btrace_tests". Use require !skip_btrace_pt_tests This changes some tests to use "require !skip_btrace_pt_tests" and "require !skip_tsx_tests". Use require !skip_aarch64_sve_tests This changes some tests to use "require !skip_aarch64_sve_tests". Use require !skip_ifunc_tests This changes some tests to use "require !skip_ifunc_tests". Use require !skip_hw_watchpoint_tests This changes some tests to use "require !skip_hw_watchpoint_tests". Use require !skip_ctf_tests This changes some tests to use "require !skip_ctf_tests". Use require !skip_d_tests This changes some tests to use "require !skip_d_tests". Use require !skip_go_tests This changes some tests to use "require !skip_go_tests". Use require !skip_ada_tests This changes some tests to use "require !skip_ada_tests". Use require !skip_fortran_tests This changes some tests to use "require !skip_fortran_tests". Use require !skip_rust_tests This changes some tests to use "require !skip_rust_tests". Use require !skip_stl_tests This changes some tests to use "require !skip_stl_tests". Use require !skip_dlmopen_tests This changes some tests to use "require !skip_dlmopen_tests". Use require !skip_shlib_tests This changes some tests to use "require !skip_shlib_tests". Use require !skip_cplus_tests This changes some tests to use "require !skip_cplus_tests". Use require is_x86_like_target This changes some tests to use "require is_x86_like_target". Use require dwarf2_support This changes some tests to use "require dwarf2_support". Use require supports_process_record This changes some tests to use "require supports_process_record". Use require supports_reverse This changes some tests to use "require supports_reverse". 2023-01-13 Tom Tromey Use unsupported in 'require' This changes 'require' to use 'unsupported' rather than 'untested'. The latter doesn't really seem to be correct according to the DejaGNU documentation: Declares a test was not run. `untested' writes in the log file a message beginning with _UNTESTED_, appending the `message' argument. For example, you might use this in a dummy test whose only role is to record that a test does not yet exist for some feature. The example there, and some text elsewhere, is what makes me think this isn't a great fit. On the other hand, 'unsupported' says: Declares that a test case depends on some facility that does not exist in the testing environment. 2023-01-13 Tom Tromey Change 'require' to accept a list of predicates This changes 'require' to accept a list of simple predicates. For now, each predicate is just the name of a proc, optionally prefixed with "!" to indicate that the result should be inverted. It's possible to make this fancier, but so far I haven't done so. One idea I had is to allow a predicate to have associated text to display on failure. Another is to convert the predicates that need a running gdb (e.g., skip_python_tests) to start their own gdb, and then 'require' could enforce the rule that gdb not be running when it is called. 2023-01-13 Tom Tromey Don't use ensure_gdb_index with require This series changes 'require' to take a list of simple predicates. This patch backs out the one use of 'require' that doesn't conform to this -- calling ensure_gdb_index. 2023-01-13 Vladimir Mezentsev gprofng: PR29987 bfd/archive.c:1447: undefined reference to `filename_ncmp' gprofng/ChangeLog 2023-01-12 Vladimir Mezentsev PR gprofng/29987 * configure.ac: Remove dependencies on libbfd and libiberty. * gprofng/src/Makefile.am: Likewise. * configure: Rebuild. * Makefile.in: Rebuild. * src/Makefile.in: Rebuild. * doc/Makefile.in: Rebuild. * gp-display-html/Makefile.in: Rebuild. 2023-01-13 Indu Bhagat libsframe: replace an strncat with strcat Calling strncat with the size of the src string is not so meaningful. The length argument to strncat should specify the remaining bytes bytes in the destination; although in this case, it appears to be unncessary altogether to use strncat in the first place. libsframe/ * sframe-dump.c (dump_sframe_func_with_fres): Use of strcat is just as fine. 2023-01-13 Andrew Burgess gdbserver: add comments to read_inferior_memory function Just adding some comments to the gdbserver read_inferior_memory function. No actual code changes. gdb/infrun: add debug print in print_signal_received_reason It would have helped me to see an infrun debug line being printed from print_signal_received_reason, so I'm adding one. 2023-01-13 Andrew Burgess gdb: int to bool conversion for normal_stop Change the return type of normal_stop (infrun.c) from int to bool. Update callers. I've also converted the (void) to () in the function declaration and definition, given I was changing those lines anyway. There should be no user visible changes after this commit. 2023-01-13 Nick Clifton Updated Romainian translation for the bfd sub-directory 2023-01-13 GDB Administrator Automatic date update in version.in 2023-01-12 Tom Tromey Disable ptype/o for dynamic types A user pointed out that "ptype/o" of a certain Ada type -- while in C mode -- caused gdb to crash. The bug here is that dynamic types can't really be printed this way. This patch avoids the bug by disabling the "/o" feature in this case. Note that using "ptype/o" in this way makes sense for the time being, because the Ada code doesn't support the "/o" feature (yet); and in any case gdb should not crash. 2023-01-12 Hans-Peter Nilsson ARM: Fix ld bloat introduced between binutils-2.38 and 2.39 Since commit 9833b7757d24, "PR28824, relro security issues", ELF_MAXPAGESIZE matters much more, with regards to layout of the linked file. That commit fixed an actual bug, but also exposes a problem for targets were that value is too high. For example, for ARM(32, a.k.a. "Aarch32") specifically bfd_arch_arm, it's set to 64 KiB, making all Linux(/GNU) targets pay an extra amount of up to 60 KiB of bloat in DSO:s and executables. This matters when there are many such files, and where storage is expensive. It's *mostly* bloat when using a Linux kernel, as ARM(32) is a good example of an target where ELF_MAXPAGESIZE is set to an extreme value for an obscure corner-case. The ARM (32-bit) kernel has 4 KiB pages, has had that value forever, and can't be configured to any other value. The use-case is IIUC "Aarch32" emulation on an "Aarch64" (arm64) kernel, but not just that, but a setup where the Linux page-size is configured to something other than the *default* 4 KiB. Not sure there actually any such systems in use, again with both Aarch32 compatibility support and a non-4KiB pagesize, with all the warnings in the kernel config and requiring the "EXPERT" level set on. So, let's do like x86-64 in a2267dbfc9e1 "x86-64: Use only one default max-page-size" and set ELF_MAXPAGESIZE to 4096. bfd: * elf32-arm.c (ELF_MAXPAGESIZE): Always set to 0x1000. 2023-01-12 Hans-Peter Nilsson ld/testsuite: Adjust for ELF_MAXPAGESIZE 0x1000 Many tests reflect a setting of ELF_MAXPAGESIZE to 64 KiB. With ELF_MAXPAGESIZE changed to 4 KiB, layout is sometimes different and symbols end up in other places. Avoid churn and regexpification of old test patterns by passing the max-page-size setting active at the time. ld/testsuite: * testsuite/ld-arm/arm-elf.exp, testsuite/ld-arm/non-contiguous-arm2.d, testsuite/ld-arm/non-contiguous-arm3.d, testsuite/ld-arm/non-contiguous-arm5.d, testsuite/ld-arm/non-contiguous-arm6.d, testsuite/ld-arm/thumb-plt-got.d, testsuite/ld-arm/thumb-plt.d: Pass -z max-page-size=0x10000 explicitly to test that rely on that value in output-matching patterns. 2023-01-12 Nick Alcock libctf: ctf-link outdated input check faulty This check has a pair of faults which, combined, can lead to memory corruption. Firstly, it assumes that the values of the ctf_link_inputs hash are ctf_dict_t's: they are not, they are ctf_link_input_t's, a much shorter structure. So the flags check which is the core of this is faulty (but happens, by chance, to give the right output on most architectures, since usually we happen to get a 0 here, so the test that checks this usually passes). Worse, the warning that is emitted when the test fails is added to the wrong dict -- it's added to the input dict, whose warning list is never consumed, rendering the whole check useless. But the dict it adds to is still the wrong type, so we end up overwriting something deep in memory (or, much more likely, dereferencing a garbage pointer and crashing). Fixing both reveals another problem: the link input is an *archive* consisting of multiple members, so we have to consider whether to check all of them for the outdated-func-info thing we are checking here. However, no compiler exists that emits a mixture of members with this flag on and members with it off, and the linker always reserializes (and upgrades) such things when it sees them: so all members in a given archive must have the same value of the flag, so we only need to check one member per input archive. libctf/ PR libctf/29983 * ctf-link.c (ctf_link_warn_outdated_inputs): Get the types of members of ctf_link_inputs right, fixing a possible spurious tesst failure / wild pointer deref / overwrite. Emit the warning message into the right dict. 2023-01-12 Nick Alcock libctf: skip the testsuite from inside dejagnu The libctf testsuite uses Tcl try/catch to trap run_output errors. This is only supported in reasonably recent Tcls, so we detect the lack of try/catch and suppress the testsuite via an Automake conditional in its absence. But this turns out not to work: Automake produces a check-DEJAGNU target regardless of the value of this conditional and sticks it in an unconditionally-executed part of the makefile, so the testsuite gets executed anyway, and fails with a nasty-looking syntax error. We can't disable it by taking "dejagnu" out of AUTOMAKE_OPTIONS, because if you do that Automake stops you using RUNTEST, RUNTESTFLAGS and other variables users would expect to work. So move to disabling the testsuite from inside the testsuite itself, importing the value of the former Automake conditional as a Tcl variable and exiting very early in default.exp if it's false. * configure.ac (TCL_TRY): No longer an Automake conditional. Rename to... (HAVE_TCL_TRY): ... this. * Makefile.am: Drop TCL_TRY. (development.exp): Set have_tcl_try. * testsuite/config/default.exp: Exit if have_tcl_try is false. * configure: Regenerated. * Makefile.in: Likewise. 2023-01-12 Nick Alcock ctf: fix various dreadful typos in the ctf_archive format comments When defining a format it helps to a) get the endianness right when you explicitly state what it is and b) define things in terms of fields that exist rather than fields that don't. (A bunch of changes of names during implementation were not reflected in these comments...) Thanks to Jose "Eye of the Eagle" Marchesi for spotting these. include/ * ctf.h (struct ctf_archive) [ctfa_ctfs]: The size element of this is in little-endian byte order, not network byte order. (struct ctf_archive_modent): This is positioned right after the end fo the struct ctf_archive, not at the offset of a nonexistent field. The number of elements in the array depends on ctfa_ndicts, not another nonexistent field. 2023-01-12 Nick Clifton Ensure that libbacktrace/allocfail.sh is not deleted when creating release tarballs. * Makefile.am (CLEANFILES): Import patch from upstream to prevent allocafail.sh from being removed when running 'make clean'. 2023-01-12 Alan Modra Use __func__ rather than __FUNCTION__ We already use C99's __func__ in places, use it more generally. This patch doesn't change uses in the testsuite. I've also left one in gold.h that is protected by GCC_VERSION < 4003. If any of the remaining uses bothers anyone I invite patches. bfd/ * bfd-in.h: Replace __FUNCTION__ with __func__. * elf32-bfin.c: Likewise. * elfnn-aarch64.c: Likewise. * elfxx-sparc.c: Likewise. * bfd-in2.h: Regenerate. gas/ * config/tc-cris.c: Replace __FUNCTION__ with __func__. * config/tc-m68hc11.c: Likewise. * config/tc-msp430.c: Likewise. gold/ * dwp.h: Replace __FUNCTION__ with __func__. * gold.h: Likewise, except for use inside GCC_VERSION < 4003. ld/ * emultempl/pe.em: Replace __FUNCTION__ with __func__. * emultempl/pep.em: Likewise. * pe-dll.c: Likewise. 2023-01-12 Alan Modra Remove myself as hppa32 maintainer Reflects the reality that I haven't done much on hppa32 for years. 2023-01-12 Mike Frysinger sim: build: drop subdir Makefile.in files These aren't used anymore, so punt them all. 2023-01-12 GDB Administrator Automatic date update in version.in 2023-01-11 Simon Marchi gdb/doc: fix install-html with Texinfo 7 Starting with Texinfo 7 (this commit [1]), the output directory for the HTML doc format is gdb/doc/gdb_html, rather than gdb/doc/gdb previously. This breaks the install-html target, which expects the HTML doc to be in gdb/doc/gdb: $ make install-html MAKEINFO=makeinfo DESTDIR=/tmp/install make[1]: Entering directory '/home/simark/build/binutils-gdb/gdb' make[2]: Entering directory '/home/simark/build/binutils-gdb/gdb/doc' makeinfo -DHAVE_MAKEINFO_CLICK --html -I /home/simark/src/binutils-gdb/gdb/doc/../../readline/readline/doc -I /home/simark/src/binutils-gdb/gdb/doc/../mi -I /home/simark/src/binutils-gdb/gdb/doc /home/simark/src/binutils-gdb/gdb/doc/gdb.texinfo makeinfo -DHAVE_MAKEINFO_CLICK --html -I /home/simark/src/binutils-gdb/gdb/doc /home/simark/src/binutils-gdb/gdb/doc/stabs.texinfo makeinfo -DHAVE_MAKEINFO_CLICK --html -I /home/simark/src/binutils-gdb/gdb/doc /home/simark/src/binutils-gdb/gdb/doc/annotate.texinfo test -z "/usr/local/share/doc/gdb" || /bin/sh /home/simark/src/binutils-gdb/gdb/doc/../../mkinstalldirs "/tmp/install/usr/local/share/doc/gdb" /usr/bin/install -c -m 644 '/home/simark/src/binutils-gdb/gdb/doc/gdb' '/tmp/install/usr/local/share/doc/gdb/gdb' /usr/bin/install: cannot stat '/home/simark/src/binutils-gdb/gdb/doc/gdb': No such file or directory /usr/bin/install -c -m 644 '/home/simark/src/binutils-gdb/gdb/doc/stabs' '/tmp/install/usr/local/share/doc/gdb/stabs' /usr/bin/install: cannot stat '/home/simark/src/binutils-gdb/gdb/doc/stabs': No such file or directory /usr/bin/install -c -m 644 '/home/simark/src/binutils-gdb/gdb/doc/annotate' '/tmp/install/usr/local/share/doc/gdb/annotate' /usr/bin/install: cannot stat '/home/simark/src/binutils-gdb/gdb/doc/annotate': No such file or directory make[2]: *** [Makefile:278: install-html] Error 1 make[2]: Leaving directory '/home/simark/build/binutils-gdb/gdb/doc' make[1]: *** [Makefile:2240: subdir_do] Error 1 make[1]: Leaving directory '/home/simark/build/binutils-gdb/gdb' make: *** [Makefile:2006: install-html] Error 2 Fix this by adding -o switches to the HTML targets, to force the output directories. [1] https://git.savannah.gnu.org/cgit/texinfo.git/commit/?id=a868421baf9c44227c43490687f8d6b8d6c95414 Change-Id: Ie147dc7b4a52eb2348005b8dc006a41b0784621f 2023-01-11 Thiago Jung Bauermann gdb: Update gdbarch.py with latest changes in gdbarch.c Commit 2b16913cdca2 ("gdb: make gdbarch_alloc take ownership of the tdep") changed gdbarch.c without updating gdbarch.py. As a result, running gdbarch.py reverts those changes and causes the build to fail. So change gdbarch.py to generate the current version of gdbarch.c. Approved-By: Simon Marchi 2023-01-11 Tom Tromey Set _WIN32_WINNT in common.m4 configure check GCC recently added support for the Windows thread model, enabling libstdc++ to support Windows natively. However, this supporrt requires a version of Windows later than the minimum version that is supported by GDB. PR build/29966 points out that the GDB configure test for std::thread does not work in this situation, because _WIN32_WINNT is not defined in test program, and so seems to be fine. This patch is an attempt to fix the problem, by using the same setting for _WIN32_WINNT at configure time as is used at build time. I don't have access to one of the older systems so I don't think I can truly test this. I did do a mingw cross build, though. I'm going to ask the bug reporter to test it. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29966 2023-01-11 Simon Marchi [gdb/testsuite] Fix regexp in gdb.threads/dlopen-libpthread.exp Fix regexp in gdb.threads/dlopen-libpthread.exp: 'libpthread\\.so' -> '/libpthread\\.so'. Tested on x86_64-linux. 2023-01-11 Alan Modra Fix XPASS weak symbols on x86_64-mingw32 Fixes commit 16fea92ccd99. * testsuite/ld-scripts/weak.exp: Don't xfail x86_64 PE targets. Do xfail other PE OS triplets by moving code setting xfails. 2023-01-11 Nick Clifton Fix a potential illegal memory access in the BFD library when parsing a corrupt DWARF file. PR 29988 * dwarf2.c (read_indexed_address): Fix check for an out of range offset. 2023-01-11 Tom de Vries [gdb/testsuite] Fix gdb.threads/dlopen-libpthread.exp for upstream glibc, again On an x86_64 laptop running ubuntu 22.04.1 with unity desktop: ... $ echo $XDG_CURRENT_DESKTOP Unity:Unity7:ubuntu ... I have: ... $ echo $LD_PRELOAD libgtk3-nocsd.so.0 ... due to package gtk3-nocsd, a package recommended by unity-session. Consequently, for each exec these dependencies are pulled in, including libpthread.so.0: ... $ lddtree /lib/x86_64-linux-gnu/libgtk3-nocsd.so.0 libgtk3-nocsd.so.0 => /lib/x86_64-linux-gnu/libgtk3-nocsd.so.0 (interpreter => none) libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 ld-linux-x86-64.so.2 => /lib/x86_64-linux-gnu/ld-linux-x86-64.so.2 ... So, while test-case gdb.threads/dlopen-libpthread.exp appears to run ok: ... # of expected passes 12 # of unsupported tests 1 ... with LD_PRELOAD="" we have instead: ... (gdb) PASS: gdb.threads/dlopen-libpthread.exp: continue to breakpoint: notify info sharedlibrary^M From To Syms Read Shared Object Library^M $hex $hex Yes /lib64/ld-linux-x86-64.so.2^M $hex $hex Yes /lib/x86_64-linux-gnu/libc.so.6^M $hex $hex Yes dlopen-libpthread.so^M (gdb) FAIL: gdb.threads/dlopen-libpthread.exp: libpthread.so found ... The problem is that libpthread is expected as dependency of dlopen-libpthread.so, but it's missing: ... $ lddtree dlopen-libpthread.so dlopen-libpthread.so => ./dlopen-libpthread.so (interpreter => none) libc.so.6 => $outputs/gdb.threads/dlopen-libpthread/dlopen-libpthread.so.d/libc.so.6 ld-linux-x86-64.so.2 => /lib/x86_64-linux-gnu/ld-linux-x86-64.so.2 ... due to having glibc 2.35, which has libpthread integrated into libc. Fix this by: - adding a proc has_dependency - using [has_dependency $exec libpthread.so] as hint that libpthread may be preloaded - using ![has_dependency $shlib libpthread.so] to detect that the libpthread.so dependency is missing. Also add a missing return after untested "no matching probes". Tested on x86_64-linux, with and without LD_PRELOAD="". 2023-01-11 Jan Beulich gas/RISC-V: adjust assembler for opcode table re-ordering PR gas/29940 With the single-operand JAL entry now sitting ahead of the two-operand one, the parsing of a two-operand insn would first try to parse an 'a'- style operand, resulting in the insertion of bogus (and otherwise unused) undefined symbols in the symbol table, having register names. Since 'a' is used as 1st operand only with J and JAL, and since JAL is the only insn _also_ allowing for a register as 1st operand (and then there being a 2nd one), special case this parsing aspect right there. Reviewed-by: Palmer Dabbelt 2023-01-11 Alan Modra Tidy some global bfd state used by gas * subsegs.c (subsegs_end): Clear abs and und userdata. 2023-01-11 Alan Modra now_seg after closing output file now_seg, a pointer into the output file sections, isn't valid after the output file is closed. gas doesn't and shouldn't use now_seg after this point of course, but let's be safe. * output-file.c (output_file_close): Clear now_seg and now_subseg. 2023-01-11 GDB Administrator Automatic date update in version.in 2023-01-10 Tom Tromey Fix bug in 'say_where' transform The patch to change say_where into a method introduced a bug. This patch fixes it. 2023-01-10 Mark Harmstone gas: Restore tc_pe_dwarf2_emit_offset for pe-aarch64 Restores tc_pe_dwarf2_emit_offset in tc-aarch64.c, which is needed to make sure that DWARF offsets are encoded correctly (they're secrels in COFF). There were remnants of this there before, but they were removed by Jedidiah's original patch - presumably because we didn't yet have .secrel32. 2023-01-10 Mark Harmstone Add aarch64-w64-mingw32 target This adds a mingw target for aarch64, including windres and dlltool. Note that the old value of jmp_aarch64_bytes was wrong, and this does the same thing as MSVC does. 2023-01-10 Mark Harmstone Add .secrel32 for pe-aarch64 Adds the .secrel32 pseudo-directive and its corresponding relocation. Add pe-aarch64 relocations This adds the remaining pe-aarch64 relocations, and gets them working. It also brings in the constant directives from ELF, as otherwise .word would be 2 rather than 4 bytes, and .xword and .dword wouldn't be defined. 2023-01-10 Mark Harmstone Fix size of external_reloc for pe-aarch64 This patch series finishes off the work by Jedidiah Thompson, and adds support for creating aarch64 PE images. This should be essentially complete: I've used this to create a "hello world" Windows program in asm, and (with GCC patches) a UEFI program in C. I think the only things missing are the .secidx relocation, which is needed for PDBs, and the SEH pseudos used for C++ exceptions. This first patch fixes the size of RELSZ; I'm not sure why it was 14 in the first place. This is the size of the "Base Relocation Block" in https://learn.microsoft.com/en-us/windows/win32/debug/pe-format, and AFAIK should be 10 for everything. 2023-01-10 Rohr, Stephan gdb/dwarf2: Fix 'rw_pieced_value' for values casted to different type. The 'rw_pieced_value' function is executed when fetching a (lazy) variable described by 'DW_OP_piece' or 'DW_OP_bit_piece'. The function checks the 'type' and 'enclosing_type' fields of the value for identity. * The 'type' field describes the type of a value. * In most cases, the 'enclosing_type' field is identical to the 'type' field. * Scenarios where the 'type' and 'enclosing_type' of an object differ are described in 'gdb/value.c'. Possible cases are: * If a value represents a C++ object, then the 'type' field gives the object's compile-time type. If the object actually belongs to some class derived from `type', perhaps with other base classes and additional members, then `type' is just a subobject of the real thing, and the full object is probably larger than `type' would suggest. * If 'type' is a dynamic class (i.e. one with a vtable), then GDB can actually determine the object's run-time type by looking at the run-time type information in the vtable. GDB may then elect to read the entire object. * If the user casts a variable to a different type (e.g. 'print ( []) '), the value's type is updated before reading the value. If a lazy value is fetched, GDB allocates space based on the enclosing type's length and typically reads the 'full' object. This is not implemented for pieced values and causes an internal error if 'type' and 'enclosing_type' of a value are not identical. However, GDB can read the value based on its type. Thus, this patch fixes the previously mentioned cases by removing the check for identity. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28605 gdb/ChangeLog: 2022-04-13 Stephan Rohr * dwarf2/loc.c (rw_pieced_value): Fix check on 'type' and 'enlcosing_type' when reading pieced value 'v'. gdb/testsuite/ChangeLog: 2022-04-13 Stephan Rohr * gdb.dwarf2/shortpiece.exp: Added test cases. 2023-01-10 Tom Tromey Convert say_where to method on code_breakpoint 'say_where' is only useful (and only called for) code breakpoints, so convert it to be a protected method on code_breakpoint. 2023-01-10 Simon Marchi gdb/doc: use @value{GDBP} in some spots Examples are supposed to use @value{GDBP} instead of the literal "(gdb)" (many of them already do). Update a bunch of spots where it wasn't the case. Change-Id: I601adaad61fd277a5fceea1759e49cede72e456d 2023-01-10 Simon Marchi gdb/doc: use @value{GDBN} in some spots Change some spots to use "@value{GDBN}" instead of just "GDB". Change-Id: I3fc26438e603538271cf33e4d148be5fda9ece7e 2023-01-10 Simon Marchi gdb/doc: some whitespace fixes For consistency, replace tabs with spaces in all gdb.texinfo menus. Change-Id: I0801a72cf82a8afe49ec842244f42d30719634ce 2023-01-10 Stefan Schulze Frielinghaus IBM zSystems: Fix offset relative to static TLS For local exec TLS relocations of the form foo@NTPOFF+x the addend was ignored. bfd/ChangeLog: * elf32-s390.c (elf_s390_relocate_section): Honor addend for R_390_TLS_LE32. * elf64-s390.c (elf_s390_relocate_section): Honor addend for R_390_TLS_LE64. ld/ChangeLog: * testsuite/ld-s390/reloctlsle-1.d: New test. * testsuite/ld-s390/reloctlsle-1.s: New test. 2023-01-10 Pekka Seppänen PR 29981 references to init.texi 2023-01-10 Alan Modra Re: Move bfd_init to bfd.c Commit b1c95bc4dd73 resulted in ...bfd.texi:246: @include: could not find init.texi which went unnoticed due to not building in a clean directory. This fixes the problem by moving bfd_init earlier, giving it a doc node, and stitching the nodes back together. * bfd.c (bfd_init): Move earlier. Give it a doc inode. Adjust other inodes to suit. * doc/bfd.texi: Don't include init.texi. Adjust nodes to suit. 2023-01-10 Mike Frysinger sim: disable recursive make in (most) subdirs Now that all (other than ppc) build in the top-level, we can disable the recursive make calls to them. This speeds things up nicely. sim: common: move test-hw-events to top-level build This is an internal developer target that isn't normally compiled, but it can still be occasionally useful. Move it to the top-level build so we can kill off common/Make-common.in. sim: move arch-specific file compilation of common/ files to top-level sim: v850: move arch-specific file compilation to top-level The arch-specific compiler flags are duplicated, but they'll be cleaned up once we move all subdir compiles to the top-level. sim: sh: move arch-specific file compilation to top-level sim: rx: move arch-specific file compilation to top-level The arch-specific flags are only used by the arch-specific modules, not the common/ files, so we can delete them too. sim: rl78: move arch-specific file compilation to top-level sim: riscv: move arch-specific file compilation to top-level The arch-specific compiler flags are duplicated, but they'll be cleaned up once we move all subdir compiles to the top-level. sim: pru: move arch-specific file compilation to top-level sim: or1k: move arch-specific file compilation to top-level The arch-specific compiler flags are duplicated, but they'll be cleaned up once we move all subdir compiles to the top-level. sim: msp430: move arch-specific file compilation to top-level sim: moxie: move arch-specific file compilation to top-level The arch-specific flags are only used by the arch-specific modules, not the common/ files, so we can delete them too. sim: mn10300: move arch-specific file compilation to top-level The arch-specific compiler flags are duplicated, but they'll be cleaned up once we move all subdir compiles to the top-level. sim: mips: move arch-specific file compilation to top-level The arch-specific compiler flags are duplicated, but they'll be cleaned up once we move all subdir compiles to the top-level. sim: microblaze: move arch-specific file compilation to top-level sim: mcore: move arch-specific file compilation to top-level sim: m68hc11: move arch-specific file compilation to top-level The arch-specific compiler flags are duplicated, but they'll be cleaned up once we move all subdir compiles to the top-level. sim: m32r: move arch-specific file compilation to top-level sim: m32c: move arch-specific file compilation to top-level The arch-specific flags are only used by the arch-specific modules, not the common/ files, so we can delete them too. sim: lm32: move arch-specific file compilation to top-level sim: iq2000: move arch-specific file compilation to top-level sim: h8300: move arch-specific file compilation to top-level sim: ft32: move arch-specific file compilation to top-level sim: frv: move arch-specific file compilation to top-level The arch-specific flags are only used by the arch-specific modules, not the common/ files, so we can delete them too. sim: example-synacor: move arch-specific file compilation to top-level sim: erc32: move arch-specific file compilation to top-level The arch-specific flags are only used by the arch-specific modules, not the common/ files, so we can delete them too. sim: d10v: move arch-specific file compilation to top-level sim: cris: move arch-specific file compilation to top-level sim: cr16: move arch-specific file compilation to top-level sim: bfin: move arch-specific file compilation to top-level The arch-specific flags are only used by the arch-specific modules, not the common/ files, so we can delete them too. sim: bpf: move arch-specific file compilation to top-level We can drop the arch-specific rules from the subdir as they're no longer used. sim: avr: move arch-specific file compilation to top-level sim: arm: move arch-specific file compilation to top-level The arch-specific flags are only used by the arch-specific modules, not the common/ files, so we can delete them too. sim: aarch64: move arch-specific file compilation to top-level sim: build: add basic framework for compiling arch objects in top-level The code so far has been assuming that we only compile common/ objects. Now that we're ready to compile arch-specific objects, refactor some of the flags & checks a bit to support both. sim: modules.c: move generation to top-level Now that all arches create libsim.a from the top-level, we have full access to their inputs, and can move the actual generation from the subdir up to the top-level. This avoids recursive makes and will help simplify state passing between the two. sim: build: drop common/nrun.o subdir hack Now that all the subdirs handle their own builds, we can drop this common rule as it's unused, and we don't want to use it anymore. sim: build: drop support for creating libsim.a in subdirs Now that all ports have moved to creating libsim.a in the top-level, drop all the support code to create it in a subdir. 2023-01-10 Mike Frysinger sim: v850: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: sh: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: rx: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: rl78: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: riscv: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: pru: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: or1k: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: msp430: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: moxie: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: mn10300: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: mips: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. The mips code is a little more tricky than others because, for multi-run targets, it generates the list of sources & objects on the fly in the configure script. 2023-01-10 Mike Frysinger sim: microblaze: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: mcore: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: m68hc11: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: m32r: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: m32c: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: lm32: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: iq2000: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: h8300: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: ft32: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: frv: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: example-synacor: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: erc32: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: d10v: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: cris: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: cr16: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: bpf: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: bfin: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: avr: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: arm: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: aarch64: move libsim.a creation to top-level The objects are still compiled in the subdir, but the creation of the archive itself is in the top-level. This is a required step before we can move compilation itself up, and makes it easier to review. The downside is that each object compile is a recursive make instead of a single one. On my 4 core system, it adds ~100msec to the build per port, so it's not great, but it shouldn't be a big deal. This will go away of course once the top-level compiles objects. 2023-01-10 Mike Frysinger sim: build: drop support for subdir extra deps Nothing uses this hook anymore, so punt it. It was largely used to track generated files (which we do in the top-level now) and extra header files (which we use automake depgen for now). 2023-01-10 Mike Frysinger sim: modules: trigger generation from top-level Add rules for tracking generated subdir modules.c files. This doesn't actually generate the file from the top-level, but allows us to add rules that need to be ordered wrt it. Once those changes land, we can rework this to actually generate from the top-level. This currently builds off of the objects that go into the libsim.a as we don't build those from the top-level either. Once we migrate that up, we can switch this to the source files directly. It's a bit hacky overall, but makes it easier to migrate things in smaller chunks, and we aren't going to keep this logic long term. 2023-01-10 Aaron Merey gdb/linespec.c: Fix missing source file during breakpoint re-set During breakpoint re-setting, the source_filename of an explicit_location_spec is used to lookup the symtabs associated with the breakpoint being re-set. This source_filename is compared with each known symtab filename in order to retrieve the breakpoint's symtabs. However the source_filename may have been originally copied from a symtab's fullname (the path where GDB found the source file) when the breakpoint was first created. If a breakpoint symtab's filename and fullname differ and there is no substitute-path rule that converts the fullname to the filename, this will cause a NOT_FOUND_ERROR to be thrown during re-setting. Fix this by using a symtab's filename to set the explicit_location_spec source_filename instead of the symtab's fullname. 2023-01-10 Aaron Merey gdb/linespec.c: Fix -Wmaybe-uninitialized warning Although the bool want_start_sal isn't actually used without being assigned a value, initialize it to be false in order to prevent the following -Wmaybe-uninitialized warning: linespec.c: In function ‘void minsym_found(linespec_state*, objfile*, minimal_symbol*, std::vector*)’: linespec.c:4150:19: warning: ‘want_start_sal’ may be used uninitialized [-Wmaybe-uninitialized] 4150 | if (is_function && want_start_sal) 2023-01-10 GDB Administrator Automatic date update in version.in 2023-01-09 Alan Modra Set dwarf2 stash pointer earlier This fixes a memory leak in the vanishingly rare cases (found by fuzzers of course) when something goes wrong in the save_section_vma, htab_create_alloc or alloc_trie_leaf calls before *pinfo is written. If *pinfo is not written, _bfd_dwarf2_cleanup_debug_info won't be able to free that memory. * dwarf2.c (_bfd_dwarf2_slurp_debug_info): Save stash pointer on setting up stash. 2023-01-09 Alan Modra peXXigen.c sanity checks Also fix a memory leak, and make some style changes. I tend to read (sizeof * x) as a multiplication of two variables, which I would not do if binutils followed the gcc coding conventions consistently (see https://gcc.gnu.org/codingconventions.html#Expressions). (sizeof *x) looks a lot better to me, or even (sizeof (*x)) which I've used here. * peXXigen.c (get_contents_sanity_check): New function. (pe_print_idata): Use it here.. (pe_print_edata): ..and here. Free data on error return. (rsrc_parse_entry): Check entry size read from file. (rsrc_parse_entries): Style fixes. (rsrc_process_section): Use bfd_malloc_and_get_section. (_bfd_XXi_final_link_postscript): Likewise. 2023-01-09 Alan Modra Move mips_refhi_list to bfd tdata Similar to commit c799eddb3512, but for mips-ecoff. mips-ecoff is marked obsolete, but we still allow reading of these object files in a number of mips targets. * coff-mips.c (struct mips_hi, mips_refhi_list): Delete. (mips_refhi_reloc, mips_reflo_reloc): Access mips_refhi_list in ecoff_data. * ecoff.c (_bfd_ecoff_close_and_cleanup): New function. * libecoff.h (struct mips_hi): Moved from coff-mips.c. (struct ecoff_tdata): Add mips_refhi_list. (_bfd_ecoff_close_and_cleanup): Declare. 2023-01-09 Alan Modra Move bfd_init to bfd.c init.c contains just one function that doesn't do much. Move it to bfd.c and give it something to do, initialising static state. So far the only initialisation is for bfd.c static variables. The idea behind reinitialising state is to see whether some set of flaky oss-fuzz crashes go away. oss-fuzz stresses binutils in ways that can't occur in reality, feeding multiple testcases into the internals of binutils. So one testcase may affect the result of the next testcase. * init.c: Delete file. Move bfd_init to.. * bfd.c (bfd_init): ..here. Init static variables. * Makefile.am (BFD32_LIBS): Remove init.lo. (BFD32_LIBS_CFILES, BFD_H_FILES): Remove init.c. * doc/local.mk: Remove mention of init.texi and init.c. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. 2023-01-09 Tom Tromey Fix crash with C++ qualified names PR c++/29503 points out that something like "b->Base::member" will crash when 'b' does not have pointer type. This seems to be a simple oversight in eval_op_member. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29503 Reviewed-By: Bruno Larsen 2023-01-09 Simon Marchi gdb/doc: fix @code{GDBN} -> @value{GDBN} Change-Id: I928d6f8d6e6bc41d8c7ddbfae8f6ae0614f4993e 2023-01-09 Christophe Lyon Skip ld/pr23169 test on arm. The test is already skipped on several targets (including AArch64) because it's invalid. * testsuite/ld-ifunc/ifunc.exp: Skip pr23169 on arm. 2023-01-09 Christophe Lyon Fix PR18841 ifunc relocation ordering In order to get the ifunc relocs properly sorted the correct class needs to be returned. The code mimics what has been done for AArch64. Fixes: FAIL: Run pr18841 with libpr18841b.so FAIL: Run pr18841 with libpr18841c.so FAIL: Run pr18841 with libpr18841bn.so (-z now) FAIL: Run pr18841 with libpr18841cn.so (-z now) bfd/ PR ld/18841 * elf32-arm.c (elf32_arm_reloc_type_class): Return reloc_class_ifunc for ifunc symbols. ld/testsuite/ * ld-arm/ifunc-12.rd: Update relocations order. * ld-arm/ifunc-3.rd: Likewise. * ld-arm/ifunc-4.rd: Likewise. 2023-01-09 Nick Clifton Updated transaltions for the gprof and binutils sub-directories 2023-01-09 Tankut Baris Aktemur testsuite: add -O0 to Intel compilers if no 'optimize' option is given icpx/icx give the following warning if '-g' is used without '-O'. icpx: remark: Note that use of '-g' without any optimization-level option will turn off most compiler optimizations similar to use of '-O0'; use '-Rno-debug-disables-optimization' to disable this remark [-Rdebug-disables-optimization] The warning makes dejagnu think that compilation has failed. E.g.: $ make check TESTS="gdb.cp/local.exp" RUNTESTFLAGS="CXX_FOR_TARGET='icpx' CC_FOR_TARGET=icx" ... gdb compile failed, icpx: remark: Note that use of '-g' without any optimization-level option will turn off most compiler optimizations similar to use of '-O0'; use '-Rno-debug-disables-optimization' to disable this remark [-Rdebug-disables-optimization] === gdb Summary === # of untested testcases 1 Furthermore, if no -O flag is passed, icx/icc optimize the code by default. This breaks assumptions in many GDB tests that the code is unoptimized by default. E.g.: $ make check TESTS="gdb.cp/cmpd-minsyms.exp" RUNTESTFLAGS="CXX_FOR_TARGET='icpx' CC_FOR_TARGET=icx" ... FAIL: gdb.cp/cmpd-minsyms.exp: gdb_breakpoint: set breakpoint at 'GDB::a() const' FAIL: gdb.cp/cmpd-minsyms.exp: gdb_breakpoint: set breakpoint at 'GDB::b() volatile' FAIL: gdb.cp/cmpd-minsyms.exp: gdb_breakpoint: set breakpoint at 'GDB::c() const volatile' FAIL: gdb.cp/cmpd-minsyms.exp: gdb_breakpoint: set breakpoint at GDB::operator == FAIL: gdb.cp/cmpd-minsyms.exp: gdb_breakpoint: set breakpoint at GDB::operator==(GDB const&) FAIL: gdb.cp/cmpd-minsyms.exp: gdb_breakpoint: set breakpoint at GDB::harder(char) FAIL: gdb.cp/cmpd-minsyms.exp: gdb_breakpoint: set breakpoint at GDB::harder(int) FAIL: gdb.cp/cmpd-minsyms.exp: gdb_breakpoint: set breakpoint at "int GDB::even_harder(char)" FAIL: gdb.cp/cmpd-minsyms.exp: gdb_breakpoint: set breakpoint at GDB::simple() === gdb Summary === # of expected passes 1 # of unexpected failures 9 To fix both problems, pass the -O0 flag explicitly, if no optimization option is given. With this patch we get, e.g.: $ make check TESTS="gdb.cp/cmpd-minsyms.exp gdb.cp/local.exp" RUNTESTFLAGS="CXX_FOR_TARGET='icpx' CC_FOR_TARGET=icx" ... === gdb Summary === # of expected passes 19 # of known failures 1 Approved-By: Tom Tromey 2023-01-09 Nils-Christian Kempke testsuite: handle icc and icpc deprecated remarks Starting with icc/icpc version 2021.7.0 and higher both compilers emit a deprecation remark when used. E.g. >> icc --version icc: remark #10441: The Intel(R) C++ Compiler Classic (ICC) is deprecated and will be removed from product release in the second half of 2023. The Intel(R) oneAPI DPC++/C++ Compiler (ICX) is the recommended compiler moving forward. Please transition to use this compiler. Use '-diag-disable=10441' to disable this message. icc (ICC) 2021.7.0 20220713 Copyright (C) 1985-2022 Intel Corporation. All rights reserved. >> icpc --version icpc: remark #10441: The Intel(R) C++ Compiler Classic (ICC) is deprecated ... icpc (ICC) 2021.7.0 20220720 Copyright (C) 1985-2022 Intel Corporation. All rights reserved. As the testsuite compile fails when unexpected output by the compiler is seen this change in the compiler breaks all existing icc and icpc tests. This patch makes the gdb testsuite more forgiving by a) allowing the output of the remark when trying to figure out the compiler version and by b) adding '-diag-disable=10441' to the compile command whenever gdb_compile is called without the intention to detect the compiler. Approved-By: Tom Tromey 2023-01-09 GDB Administrator Automatic date update in version.in 2023-01-08 Alan Modra PR29972, inconsistent format specification in singular form PR 29972 * readelf.c (process_dynamic_section): Correct format string. 2023-01-08 GDB Administrator Automatic date update in version.in 2023-01-07 GDB Administrator Automatic date update in version.in 2023-01-06 Indu Bhagat sframe: fix the defined SFRAME_FRE_TYPE_*_LIMIT constants An earlier commit 3f107464 defined the SFRAME_FRE_TYPE_*_LIMIT constants. These constants are used (by gas and libsframe) to pick an SFrame FRE type based on the function size. Those constants, however, were buggy, causing the generated SFrame sections to be bloated as SFRAME_FRE_TYPE_ADDR2/SFRAME_FRE_TYPE_ADDR4 got chosen more often than necessary. gas/ * sframe-opt.c (sframe_estimate_size_before_relax): Use typecast. (sframe_convert_frag): Likewise. libsframe/ * sframe.c (sframe_calc_fre_type): Use a more appropriate type for argument. Adjust the check for SFRAME_FRE_TYPE_ADDR4_LIMIT to keep it warning-free but meaningful. include/ * sframe-api.h (sframe_calc_fre_type): Use a more appropriate type for the argument. * sframe.h (SFRAME_FRE_TYPE_ADDR1_LIMIT): Correct the constant. (SFRAME_FRE_TYPE_ADDR2_LIMIT): Likewise. (SFRAME_FRE_TYPE_ADDR4_LIMIT): Likewise. 2023-01-06 Indu Bhagat libsframe: adjust an incorrect check in flip_sframe When sframe_encoder_write needs to flip the buffer containing the SFrame section before writing, it is not necessary that the SFrame FDES are in the order of their sfde_func_start_fre_off. On the contrary, SFrame FDEs will be sorted in the order of their start address. So, remove this incorrect assumption which is basically assuming that the last sfde_func_start_fre_off seen will help determine the end of the flipped buffer. The function now keeps track of the bytes_flipped and then compares it with the expected value. Also, added two more checks at appropriate places: - check that the SFrame FDE read is within bounds - check that the SFrame FRE read is within bounds libsframe/ * sframe.c (flip_sframe): Adjust an incorrect check. Add other checks to ensure reads are within the buffer size. 2023-01-06 Jan Beulich ld: yet another PDB build fix (or workaround) Older bash looks to improperly deal with backslashes in here-documents, leaving them in place on the escaped double quotes inside the parameter expansion. Convert to a model without using such a construct, by simply splitting the here-documents into three ones. 2023-01-06 Nick Clifton Updated Bulgarian and Russian translations for LD and BFD respectively 2023-01-06 Alan Modra Fix an aout memory leak * aoutx.h (aout_bfd_free_cached_info): Free line_buf. Tidy pe flag in coff_data Make it a bool, use obj_pe accessor everywhere. 2023-01-06 Alan Modra Make coff backend data read-only The bfd_coff_backend_data struct should be read-only, the only thing preventing this is that objcopy writes to one of the fields, _bfd_coff_long_section_names. This patch creates a copy of the field in bfd coff_obj_tdata, which makes more sense anyway. When enabling long section names the intent is to do so for a particular bfd, not for all bfds that might happen to be using the target xvec. bfd/ * coffcode.h: Update coff long section name comment. (bfd_coff_set_long_section_names_allowed): Use macro accessor to set flag. (bfd_coff_set_long_section_names_disallowed): Tidy. (coff_backend_info): Return a const pointer. (bfd_coff_std_swap_table, ticoff0_swap_table, ticoff1_swap_table), (bigobj_swap_table): Make const. (bfd_coff_long_section_names): Use tdata copy. (coff_mkobject): Set long_section_names from coff_backend_info. * coff-go32.c (_bfd_go32_mkobject): Likewise. * peicode.h (pe_mkobject): Likewise. * coff-sh.c (bfd_coff_small_swap_table): Make const. * libcoff-in.h (struct coff_tdata): Add long_section_names, reorder fields. * libcoff.h: Regenerate. binutils/ * objcopy.c (set_long_section_mode): Move earlier in file. (copy_object): Call set_long_section_mode here, after setting output format. (copy_file): Don't call set_long_section_mode. 2023-01-06 Bruno Larsen gdb/c++: Detect ambiguous variables in imported namespaces When running gdb.cp/nsusing.cc and stopping at line 17, we can ask GDB to print x and get a compiler-dependent answer. Using gcc 12.2.1, GDB will print M::x, and using clang 16.0.0 prints N::x. Not only is this behavior confusing to users, it is also not consistent with compiler behaviors, which would warn that using x is ambiguous at this point. This commit makes GDB behavior consistent with compilers. it achieves this by making it so instead of exiting early when finding any symbol with the correct name, GDB continues searching through all include directives, storing all matching symbols in a relational map betwen the mangled name and the found symbols. If the resulting map has more than one entry, GDB says that the reference is ambiguous and lists all possibilities. Otherwise it returns the block_symbol structure for the desired symbol, or an empty struct if nothing was found. The commit also changes gdb.cp/nsusing.exp to test the ambiguous detection. 2023-01-06 Bruno Larsen gdb/mi: add no-history stop reason When executing in reverse and runs out of recorded history, GDB prints a warning to the user, but does not add a reason in the stopped record, for example: *stopped,frame={addr="0x000000000040113e",func="main",args=[],file="/home/blarsen/Documents/fsf_build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.reverse/solib-reverse.c",fullname="/home/blarsen/Documents/binutils-gdb/gdb/testsuite/gdb.reverse/solib-reverse.c",line="27",arch="i386:x86-64"},thread-id="1",stopped-threads="all",core="1" This problem was reported as record/29260. This commit adds the reason no-history to the record, making it easier for interfaces using the mi interpreter to report the result. It also changes the test gdb.mi/mi-reverse.exp to test that the reason shows up correctly. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29260 2023-01-06 Bruno Larsen gdb/testsuite: Fix FAILs in gdb.linespec/cpcompletion.exp when using clang When using clang 16.0.0 to test gdb.linespec/cpcompletion.exp, I get 99 unexpected failures. They all fail to produce a complete list of completion options for a function, either overload2_function, overload3_function or anon_ns_function. This happens because clang is optimizing them away, since they are never used. Fix this by adding __attribute__((used)) to all declarations to the aforementioned functions. 2023-01-06 Clément Chigot configure: remove dependencies on gmp and mpfr when gdb is disabled Since 991180627851801f1999d1ebbc0e569a17e47c74, the configure checks about GMP and MPFR for gdb builds have been moved to the toplevel configure. However, it doesn't take into account the --disable-gdb option. Meaning that a build without gdb will require these libraries even if not needed. ChangeLog: * configure.ac: Skip GMP and MPFR when --disable-gdb is provided. * configure: Regenerate. 2023-01-06 GDB Administrator Automatic date update in version.in 2023-01-05 Simon Marchi gdbsupport: fix scoped_debug_start_end's move constructor I spotted a problem with scoped_debug_start_end's move constructor. When constructing a scoped_debug_start_end through it, it doesn't disable the moved-from object, meaning there are now two objects that will do the side-effects of decrementing the debug_print_depth global and printing the "end" message. Decrementing the debug_print_depth global twice is actually problematic, because the increments and decrements get out of sync, meaning we should hit this assertion, in theory: gdb_assert (debug_print_depth > 0); However, in practice, we don't see that. This is because despite the move constructor being required for this to compile: template static inline scoped_debug_start_end ATTRIBUTE_NULL_PRINTF (6, 7) make_scoped_debug_start_end (PT &&pred, const char *module, const char *func, const char *start_prefix, const char *end_prefix, const char *fmt, ...) { va_list args; va_start (args, fmt); auto res = scoped_debug_start_end (pred, module, func, start_prefix, end_prefix, fmt, args); va_end (args); return res; } ... it is never actually called, because compilers elide the move constructors all the way (the scoped_debug_start_end gets constructed directly in the instance of the top-level caller). To confirm this, I built GDB with -fno-elide-constructors, and now I see it: /home/simark/src/binutils-gdb/gdb/../gdbsupport/common-debug.h:147: internal-error: ~scoped_debug_start_end: Assertion `debug_print_depth > 0' failed. #9 0x00005614ba5f17c3 in internal_error_loc (file=0x5614b8749960 "/home/simark/src/binutils-gdb/gdb/../gdbsupport/common-debug.h", line=147, fmt=0x5614b8733fa0 "%s: Assertion `%s' failed.") at /home/simark/src/binutils-gdb/gdbsupport/errors.cc:58 #10 0x00005614b8e1b2e5 in scoped_debug_start_end::~scoped_debug_start_end (this=0x7ffc6c5e7b40, __in_chrg=) at /home/simark/src/binutils-gdb/gdb/../gdbsupport/common-debug.h:147 #11 0x00005614b96dbe34 in make_scoped_debug_start_end (pred=@0x5614baad7200: true, module=0x5614b891d840 "infrun", func=0x5614b891d800 "infrun_debug_show_threads", start_prefix=0x5614b891d7c0 "enter", end_prefix=0x5614b891d780 "exit", fmt=0x0) at /home/simark/src/binutils-gdb/gdb/../gdbsupport/common-debug.h:235 Fix this by adding an m_disabled field to scoped_debug_start_end, and setting it in the move constructor. Change-Id: Ie5213269c584837f751d2d11de831f45ae4a899f 2023-01-05 Simon Marchi gdbsupport: add gdb::string_view_hash Add the string_view_hash type, which will be useful to be able to use gdb::string_view as std::unordered_map keys. Use it in gdb/symtab.c, to exercise it. Change-Id: Id69a466ab19a9f6620b5df8a2dd29b5cddd94c00 Approved-By: Andrew Burgess 2023-01-05 Simon Marchi gdbsupport: move fast_hash to gdbsupport/common-utils.h The following patch adds a hash type for gdb::string_view in gdbsupport, which will use the fast_hash function. Move the latter to gdbsupport. Change-Id: Id74510e17801e775bd5ffa5f443713d79adf14ad Approved-By: Andrew Burgess 2023-01-05 Simon Marchi gdbsupport: move libxxhash configure check to gdbsupport The following patch moves the fast_hash function, which uses libxxhash, to gdbsupport. Move the libxxhash configure check to gdbsupport (and transitively to gdbserver). Change-Id: I242499e50c8cd6fe9f51e6e92dc53a1b3daaa96e Approved-By: Andrew Burgess 2023-01-05 Simon Marchi gdb: make gdbarch_alloc take ownership of the tdep It's currently not clear how the ownership of gdbarch_tdep objects works. In fact, nothing ever takes ownership of it. This is mostly fine because we never free gdbarch objects, and thus we never free gdbarch_tdep objects. There is an exception to that however: when initialization fails, we do free the gdbarch object that is not going to be used, and we free the tdep too. Currently, i386 and s390 do it. To make things clearer, change gdbarch_alloc so that it takes ownership of the tdep. The tdep is thus automatically freed if the gdbarch is freed. Change all gdbarch initialization functions to pass a new gdbarch_tdep object to gdbarch_alloc and then retrieve a non-owning reference from the gdbarch object. Before this patch, the xtensa architecture had a single global instance of xtensa_gdbarch_tdep. Since we need to pass a dynamically allocated gdbarch_tdep_base instance to gdbarch_alloc, remove this global instance, and dynamically allocate one as needed, like we do for all other architectures. Make the `rmap` array externally visible and rename it to the less collision-prone `xtensa_rmap` name. Change-Id: Id3d70493ef80ce4bdff701c57636f4c79ed8aea2 Approved-By: Andrew Burgess 2023-01-05 Simon Marchi gdb/testsuite: add back needed -re clause in gdb_breakpoint Commit 4b9728be ("gdb: use gdb_test_multiple in gdb_breakpoint") caused, amongst others: (gdb) break 1^M No line 1 in the current file.^M Make breakpoint pending on future shared library load? (y or [n]) n^M (gdb) FAIL: gdb.dwarf2/dw2-main-no-line-number.exp: gdb_breakpoint: set breakpoint at 1 FAIL: gdb.dwarf2/dw2-main-no-line-number.exp: !$breakpoint_at_missing_lineno_set This is because it removed one empty -re clause (matching just the prompt) that is necessary after replying "n" to the pending breakpoint question. Add this clause back. Change-Id: Ibfaa059d58bbea660bc29f0547e2f75c323fcbc6 Approved-By: Tom de Vries 2023-01-05 Tom de Vries [gdb/python] Avoid queue.SimpleQueue for python 3.6 On openSUSE Leap 15.4 with python 3.6, the gdb.dap/basic-dap.exp test-case fails as follows: ... ERROR: eof reading json header while executing "error "eof reading json header"" invoked from within "expect { -i exp19 -timeout 10 -re "^Content-Length: (\[0-9\]+)\r\n" { set length $expect_out(1,string) exp_continue } -re "^(\[^\r\n\]+)..." ("uplevel" body line 1) invoked from within "uplevel $body" NONE eof reading json header UNRESOLVED: gdb.dap/basic-dap.exp: startup - initialize ... Investigation using a "catch throw" shows that: ... (gdb) at gdb/python/py-utils.c:396 396 error (_("Error occurred in Python: %s"), msg.get ()); (gdb) p msg.get () $1 = 0x2b91d10 "module 'queue' has no attribute 'SimpleQueue'" ... The python class queue.SimpleQueue was introduced in python 3.7. Fix this by falling back to queue.Queue for python <= 3.6. Tested on x86_64-linux, by successfully running the test-case: ... # of expected passes 47 ... 2023-01-05 Tom Tromey Add type to expression dump of symbol I recently had cause to dump some expressions from gdb. I got output like this: Operation: BINOP_GTR Operation: OP_VAR_VALUE Block symbol: Symbol: small_value Block: 0x39b4c20 Operation: OP_LONG Operation: OP_LONG Type: int Constant: 0x0000000000000014 This is ok, but it would have been handy to see the type of the symbol. This patch adds this information. Reviewed-By: Bruno Larsen 2023-01-05 Nick Clifton Remove Stephen Casner as the PDP11 maintainer. Add an extra emulation called arm64pe to the aarch64pe emulation. 2023-01-05 Andreas K. Huettel Un xfail the PR19719 test for the AArch64 architecture 2023-01-05 Nick Clifton Updated Bulgarian and Russian translations for the gprof subdirectory 2023-01-05 Paul Koning PR29963, PDP11 link produces spurious relocation truncated messages PDP11 is a 16-bit processor with 16-bit logical addresses. Therefore wrapping should be allowed on the 16-bit relocs, and may as well be allowed for the 32-bit reloc too. PR 29963 * pdp11.c (howto_table_pdp11): Use complain_overflow_dont. 2023-01-05 Mike Frysinger sim: mips: add multi source to built sources The multirun generation mode is a bit of a mess as generated run files depend on generate igen files, all with unknown names ahead of time. In the multirun mode, be lazy and declare all of these generated source files as built sources so they'll be created early on. 2023-01-05 Tsukasa OI sim: Move getopt checking inside SIM_AC_PLATFORM This commit moves getopt declaration checker originally in sim/ configure.ac; added in commit 340aa4f6872c ("sim: Check known getopt definition existence") to sim/m4/sim_ac_platform.m4 (inside the SIM_AC_PLATFORM macro). It also regenerates configuration files using the maintainer mode. 2023-01-05 Guillermo E. Martinez sim: bpf: fix testsuite due to linker warnings [PR sim/29954] On a bpf-*-* testsuite fails: ./ld/ld-new: warning: test has a LOAD segment with RWX permissions Adjusting `--memory-size=10Mb' to the simulator bpf testsuite passes. Tested on bpf-*-*: Bug: https://sourceware.org/PR29954 sim/testsuite: * bpf/allinsn.exp (SIMFLAGS_FOR_TARGET): Adjust sim flags. 2023-01-05 GDB Administrator Automatic date update in version.in 2023-01-04 Indu Bhagat MAINTAINERS: add myself as maintainer of libsframe binutils/ * MAINTAINERS: Add myself as maintainer of libsframe. 2023-01-04 H.J. Lu x86: Remove duplicated I386_PCREL_TYPE_P/X86_64_PCREL_TYPE_P I386_PCREL_TYPE_P and X86_64_PCREL_TYPE_P are defined twice. Remove the duplications. * elfxx-x86.h (I386_PCREL_TYPE_P): Remove duplication. (X86_64_PCREL_TYPE_P): Likewise. 2023-01-04 Lancelot SIX gdb: ensure test_name is initialized in gdb_breakpoint A refactoring in 4b9728bec15 (gdb: use gdb_test_multiple in gdb_breakpoint) left the $test_name variable undefined. This patch fixes this. Approved-By: Simon Marchi 2023-01-04 Tom Tromey Use first_opcode in another spot I found one place that could use expression::first_opcode. Reviewed-By: Lancelot Six 2023-01-04 Tom Tromey Convert exp_uses_objfile to a method of expression This changes the exp_uses_objfile function to be a method of 'expression'. Reviewed-By: Lancelot Six 2023-01-04 Simon Marchi gdb: use gdb_test_multiple in gdb_breakpoint When running the testsuite in a non-optimized build on a slow machine, I sometimes get: UNTESTED: gdb.gdb/selftest.exp: Cannot set breakpoint at captured_main, skipping testcase. do_self_tests, in lib/selftest-support.exp, uses `with_timeout_factor 10`, to account for the fact that reading the debug info of the gdb binary (especially in a non-optimized GDB) can take time. But then it ends up calling gdb_breakpoint, which uses gdb_expect with a hard-coded timeout of 30 seconds. Fix this by making gdb_breakpoint use gdb_test_multiple, which is a desired change anyway for this kind of simple command / expected output case. Change-Id: I9b06ce991cc584810d8cc231b2b4893980b8be75 Reviewed-By: Lancelot Six 2023-01-04 Alan Modra Re: Avoid unaligned pointer reads in PEP .idata section Fix testsuite fallout. * testsuite/ld-pe/cfi.d: Adjust for changed .idata padding. * testsuite/ld-pe/secidx_64.d: Likewise. * testsuite/ld-pe/secrel_64.d: Likewise. 2023-01-04 Alan Modra objcopy fuzzed pe out of memory This occurs when attempting to read back a section from the output file in _bfd_XX_bfd_copy_private_bfd_data_common. The copy of the section failed size sanity checking, thus it won't be written. * objcopy.c (copy_object): Return false if copy_section or copy_relocations_in_section fails. 2023-01-04 Alan Modra fuzzed file timeout objcopy of archive, element containing an object with a fuzzed section size far exceeding the element size. copy_section detects this, but the temp file is laid out for the large section. It can take a long time to write terabytes of sparse file, a waste of time when it will be deleted. * objcopy.c (copy_archive): Don't write element contents after bad status result from copy_object. 2023-01-04 Alan Modra asan: segv in parse_module * vms-alpha.c (parse_module): Ignore DST__K_SRC_SETFILE data if out of range. 2023-01-04 Alan Modra addr2line out of memory on fuzzed file Another case of fuzzers finding the section size sanity checks are avoided with SHT_NOBITS sections. * dwarf2.c (read_section): Check that the DWARF section being read has contents. 2023-01-04 Andrew Burgess gdb: fix some #ifdef logic in bt-utils.h In passing I spotted some incorrect #ifdef logic in bt-utils.h. The logic in question has existed since the file was originally added in commit: commit abbbd4a3e0ca51132e7fb31a43f896d29894dae0 Date: Wed Aug 11 13:24:33 2021 +0100 gdb: use libbacktrace to create a better backtrace for fatal signals The code is trying to select between using libbacktrace or using the execinfo supplied backtrace API. First we check to see if we can use libbacktrace. If we can then we include some header files, and then set some defines to indicate that libbacktrace is being used. Then we check if execinfo is available, if it is then we include and set some alternative defines. In theory the second block of logic should not trigger if the first block (that uses libbacktrace) has also triggered, but we incorrectly check the define 'PRINT_BACKTRACE_ON_FATAL_SIGNAL' instead of checking for 'GDB_PRINT_INTERNAL_BACKTRACE_USING_LIBBACKTRACE', so the second block triggers more than it should. The 'PRINT_BACKTRACE_ON_FATAL_SIGNAL' define is not defined anywhere, this was a mistake in the original commit. In reality this is harmless, we include when we don't need too, but in by-utils.c the libbacktrace define is always checked for before the execinfo define, so we never actually end up using the execinfo path (when libbacktrace is available). But I figure its still worth cleaning this up. I've tested GDB in a "default" build where libbacktrace is used, and when configuring with --disable-libbacktrace which causes the execinfo backtrace API to be used instead, both still appear to work fine. There should be no user visible changes after this commit. 2023-01-04 Bruno Larsen gdb: add 'maintenance print record-instruction' command While chasing some reverse debugging bugs, I found myself wondering what was recorded by GDB to undo and redo a certain instruction. This commit implements a simple way of printing that information. If there isn't enough history to print the desired instruction (such as when the user hasn't started recording yet or when they request 2 instructions back but only 1 was recorded), GDB warns the user like so: (gdb) maint print record-instruction Not enough recorded history If there is enough, GDB prints the instruction like so: (gdb) maint print record-instruction 4 bytes of memory at address 0x00007fffffffd5dc changed from: 01 00 00 00 Register eflags changed: [ IF ] Register rip changed: (void (*)()) 0x401115 Approved-by: Eli Zaretskii Reviewed-by: Alexandra Hajkova Reviewed-by: Lancelot Six Approved-by: Tom Tromey 2023-01-04 Andreas K. Huettel Fix AArch64 linker testsuite failures trigeered by differences in build environments. PR 29843 * testsuite/ld-aarch64/bti-plt-5.d: Relax regxps slightly to allow for differences in build environments. * testsuite/ld-aarch64/tls-relax-gdesc-le-now.d: Likewise. 2023-01-04 Mark Harmstone Avoid unaligned pointer reads in PEP .idata section This is something I discovered when working on aarch64, though it's relevant to x86_64 too. The PE32+ imports are located in the .idata section, which starts off with a 20-byte structure for each DLL, containing offsets into the rest of the section. This is the Import Directory Table in https://learn.microsoft.com/en-us/windows/win32/debug/pe-format, which is a concatenation of the .idata$2 sections. This is then followed by an 20 zero bytes generated by the linker script, which calls this .idata$3. After this comes the .idata$4 entries for each function, which the loader overwrites with the function pointers. Because there's no padding between .idata$3 and .idata$4, this means that if there's an even number of DLLs, the function pointers won't be aligned on an 8-byte boundary. Misaligned reads are slower on x86_64, but this is more important on aarch64, as the e.g. `ldr x0, [x0, :lo12:__imp__func]` the compiler might generate requires __imp__func (the .idata$4 entry) to be aligned to 8 bytes. Without this you get IMAGE_REL_ARM64_PAGEOFFSET_12L overflow errors. 2023-01-04 Alan Modra Merge config/picflag.m4 from gcc and regen libiberty/configure 2023-01-04 Tsukasa OI sim: Regenerate using the maintainer mode Those files have changed by regenerating using the maintainer mode. The first line of sim/ppc/pk.h have changed by an effect of the commit 319e41e83a40 ("sim: ppc: inline the sim-packages option"). 2023-01-04 GDB Administrator Automatic date update in version.in 2023-01-03 Max Filippov opcodes: xtensa: fix jump visualization for FLIX opcodes/ * xtensa-dis.c (print_insn_xtensa): Add local variables insn_type, target and imm_pcrel to track control flow across multiple slots. opcodes: xtensa: implement styled disassembly opcodes/ * xtensa-dis.c (print_xtensa_operand) (print_insn_xtensa): Replace fprintf_func with fprintf_styled_func. 2023-01-03 Tom Tromey Add test case for "finish" with variably-sized types This adds a test case for "finish" with variably-sized types, and for inferior calls as well. This also extends the "runto" proc to handle temporary breakpoints. Use value_at_non_lval in get_call_return_value get_call_return_value can handle RETURN_VALUE_STRUCT_CONVENTION, because the call is completely managed by gdb. However, it does not handle variably-sized types correctly. The simplest way to fix this is to use value_at_non_lval, which does type resolution. Fix inferior calls with variably-sized return type This patch updates the gdbarch_return_value_as_value implementations to work correctly with variably-sized return types. Convert selected architectures to gdbarch_return_value_as_value This converts a few selected architectures to use gdbarch_return_value_as_value rather than gdbarch_return_value. The architectures are just the ones that I am able to test. This patch should not introduce any behavior changes. 2023-01-03 Tom Tromey Don't let property evaluation affect the current language On PPC, we saw that calling an inferior function could sometimes change the current language, because gdb would select the call dummy frame -- associated with _start. This patch changes gdb so that the current language is never affected by DWARF property evaluation. 2023-01-03 Tom Tromey Introduce value_at_non_lval In some cases, while a value might be read from memory, gdb should not record the value as being equivalent to that memory. In Ada, the inferior call code will call ada_convert_actual -- and here, if the argument is already in memory, that address will simply be reused. However, for a call like "f(g())", the result of "g" might be on the stack and thus overwritten by the call to "f". This patch introduces a new function that is like value_at but that ensures that the result is non-lvalue. 2023-01-03 Tom Tromey Don't emit gdbarch_return_value The previous patch introduced a new overload of gdbarch_return_value. The intent here is that this new overload always be called by the core of gdb -- the previous implementation is effectively deprecated, because a call to the old-style method will not work with any converted architectures (whereas calling the new-style method is will delegate when needed). This patch changes gdbarch.py so that the old gdbarch_return_value wrapper function can be omitted. This will prevent any errors from creeping in. 2023-01-03 Tom Tromey Add new overload of gdbarch_return_value The gdbarch "return_value" can't correctly handle variably-sized types. The problem here is that the TYPE_LENGTH of such a type is 0, until the type is resolved, which requires reading memory. However, gdbarch_return_value only accepts a buffer as an out parameter. Fixing this requires letting the implementation of the gdbarch method resolve the type and return a value -- that is, both the contents and the new type. After an attempt at this, I realized I wouldn't be able to correctly update all implementations (there are ~80) of this method. So, instead, this patch adds a new method that falls back to the current method, and it updates gdb to only call the new method. This way it's possible to incrementally convert the architectures that I am able to test. 2023-01-03 Tom Tromey Fix crash in amd64-tdep.c amd64-tdep.c could crash when 'finish'ing from a function whose return type had variable length. In this situation, the value will be passed by reference, and this patch avoids the crash. (Note that this does not fully fix the bug reported, but it does fix the crash, so it seems worthwhile to land independently.) 2023-01-03 Tom de Vries [gdb/testsuite] Add xfail in gdb.arch/i386-pkru.exp On a x86_64-linux machine with pkru register, I run into: ... (gdb) PASS: gdb.arch/i386-pkru.exp: set pkru value info register pkru^M pkru 0x12345678 305419896^M (gdb) FAIL: gdb.arch/i386-pkru.exp: read value after setting value ... This is a regression due to kernel commit e84ba47e313d ("x86/fpu: Hook up PKRU onto ptrace()"). This is fixed by recent kernel commit 4a804c4f8356 ("x86/fpu: Allow PKRU to be (once again) written by ptrace."). The regression occurs for kernel versions v5.14-rc1 (the first tag containing the regression) up to but excluding v6.2-rc1 (the first tag containing the fix). Fix this by adding an xfail for the appropriate kernel versions. Tested on x86_64-linux. PR testsuite/29790 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29790 2023-01-03 Tom Tromey Do not use PyObject_CallNoArgs PyObject_CallNoArgs was introduced in Python 3.9, so avoid it in favor of PyObject_CallObject. 2023-01-03 Himal Fix a potential problem in the BFD library when accessing the Windows' nul device driver. PR 29947 * bfdio.c (_bfd_real_fopen): Do not add a prefix to the Windows' nul device filename. 2023-01-03 Nick Clifton Fix a translation problem in the x86 assembler. PR 29952 * config/tc-i386.c (md_assemble): Avoid constructing translatable strings. Updated translations for various languages and sub-directories 2023-01-03 Luis Machado Add new NT_ARM_ZA and NT_ARM_SSVE register set constants. 2023-01-03 Andrew Burgess [gdb] Fix segfault during inferior call to ifunc With a simple test-case: ... $ cat test.c char *p = "a"; int main (void) { return strlen (p); } $ gcc -g test.c ... we run into this segfault: ... $ gdb -q -batch a.out -ex start -ex "p strlen (p)" Temporary breakpoint 1 at 0x1151: file test.c, line 4. [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Temporary breakpoint 1, main () at test.c:4 4 return strlen (p); Fatal signal: Segmentation fault ... The strlen is an ifunc, and consequently during the call to call_function_by_hand_dummy for "p strlen (p)" another call to call_function_by_hand_dummy is used to resolve the ifunc. This invalidates the get_current_frame () result in the outer call. Fix this by using prepare_reinflate and reinflate. Note that this series ( https://inbox.sourceware.org/gdb-patches/20221214033441.499512-1-simon.marchi@polymtl.ca/ ) should address this problem, but this patch is a simpler fix which is easy to backport. Tested on x86_64-linux. Co-Authored-By: Tom de Vries PR gdb/29941 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29941 2023-01-03 Mike Frysinger sim: sh: move some generated source files to built sources This should have been part of the previous commit 80636a54bcfa2bca3dc8f ("sim: build: move generated headers to built sources"), but they were missed because they're .c files effectively treated as .h files. sim: build: add var for tracking sim enable directly Rather than rely on SIM_SUBDIRS being set, add a dedicated variable to track whether to enable the sim. While the current code works fine, it won't work as we remove the recursive make logic (i.e. the SIM_SUBDIRS variable). sim: common: drop libcommon.a linkage All of these objects should be in libsim.a already, so don't link to it too. In practice it never gets used, but no point in listing it. 2023-01-03 Mike Frysinger sim: build: move generated headers to built sources Automake's automatic header deptracking has a bootstrap problem where it can't detect generated headers when compiling. We've been handling that by adding a custom SIM_ALL_RECURSIVE_DEPS variable, but that only works when building objects recursively in subdirs. As we move those out to the top-level, we don't have any recursive steps anymore. The Automake approach is to declare those headers in BUILT_SOURCES. This isn't completely foolproof as the Automake manual documents: it only activates for `make all`, not `make foo.o`, but that shouldn't be a huge limitation as it only affects the initial compile. After that, rebuilds should work fine. 2023-01-03 Mike Frysinger sim: cgen: drop common subdir build rules Now that everything has been hoisted to the top-level, we can delete this unused logic. sim: or1k: hoist cgen rules to top-level sim: m32r: hoist cgen rules to top-level sim: lm32: hoist cgen rules to top-level sim: iq2000: hoist cgen rules to top-level sim: frv: hoist cgen rules to top-level sim: cris: hoist cgen rules to top-level sim: bpf: hoist cgen rules to top-level sim: cgen: hoist rules to the top-level build The rules seem to generate the same output as existing subdir cgen rules with cgen ports, so hopefully this should be correct. These are the last set of codegen rules that we run in subdirs, so this will help unblock killing off subdir builds entirely. sim: build: use Automake include vars Rather than define our own hack for emitting an include statement, use the existing Automake include variables. These have the nice side-effect of being more portable. 2023-01-03 GDB Administrator Automatic date update in version.in 2023-01-02 Tom Tromey Simplify debug_exp debug_exp should call expression::dump rather than using the 'op' member. 2023-01-02 Tom Tromey Initial implementation of Debugger Adapter Protocol The Debugger Adapter Protocol is a JSON-RPC protocol that IDEs can use to communicate with debuggers. You can find more information here: https://microsoft.github.io/debug-adapter-protocol/ Frequently this is implemented as a shim, but it seemed to me that GDB could implement it directly, via the Python API. This patch is the initial implementation. DAP is implemented as a new "interp". This is slightly weird, because it doesn't act like an ordinary interpreter -- for example it doesn't implement a command syntax, and doesn't use GDB's ordinary event loop. However, this seemed like the best approach overall. To run GDB in this mode, use: gdb -i=dap The DAP code will accept JSON-RPC messages on stdin and print responses to stdout. GDB redirects the inferior's stdout to a new pipe so that output can be encapsulated by the protocol. The Python code uses multiple threads to do its work. Separate threads are used for reading JSON from the client and for writing JSON to the client. All GDB work is done in the main thread. (The first implementation used asyncio, but this had some limitations, and so I rewrote it to use threads instead.) This is not a complete implementation of the protocol, but it does implement enough to demonstrate that the overall approach works. There is a rudimentary test suite. It uses a JSON parser written in pure Tcl. This parser is under the same license as Tcl itself, so I felt it was acceptable to simply import it into the tree. There is also a bit of documentation -- just documenting the new interpreter name. 2023-01-02 Jonas Hoerberg Fix target remote pipe command for MinGW The cced7cacecad104fff0 ("gdb: preserve `|` in connection details string") commit added '|' detection and removal to ser-pipe.c, but missed to add it to ser-mingw.c. This results in the error message below for MinGW hosts: error starting child process '| ': CreateProcess: No such file or directory This commit add the missing '|' detection and removal to ser-mingw.c. 2023-01-02 Tom Tromey Remove target: prefix from gdb_sysroot in find_separate_debug_file I noticed that, when using gdbserver, gdb might print: Reading /usr/lib/debug/lib64//libcap.so.2.48-2.48-4.fc36.x86_64.debug from remote target... Reading target:/usr/lib/debug/lib64//libcap.so.2.48-2.48-4.fc36.x86_64.debug from remote target... The second line has the "target:" prefix, but from the code it's clear that this string is being passed verbatim to gdbserver -- which seems wrong. I filed PR remote/29929 for this. The problem here is that find_separate_debug_file uses gdb_sysroot without checking to see if it starts with the "target:" prefix. This patch changes this code to be a little more careful. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29929 2023-01-02 Tom de Vries [gdb/testsuite] Fix gdb.python/py-breakpoint.exp with libstdc++ debug info On x86_64-linux, I run into: ... (gdb) python hbp1 = gdb.Breakpoint("add", type=gdb.BP_HARDWARE_BREAKPOINT)^M Hardware assisted breakpoint 2 at 0x40072e: add. (7 locations)^M (gdb) FAIL: gdb.python/py-breakpoint.exp: test_hardware_breakpoints: \ Set hardware breakpoint ... due to libstdc++ debug info: ... $ gdb -q -batch outputs/gdb.python/py-breakpoint/py-breakpoint \ -ex start \ -ex "b add" \ -ex "info break" Temporary breakpoint 1 at 0x40076a: file py-breakpoint.c, line 50. Temporary breakpoint 1, main (argc=1, argv=$hex) at py-breakpoint.c:50 50 int foo = 5; Breakpoint 2 at 0x40072e: add. (7 locations) Num Type Disp Enb Address What 2 breakpoint keep y 2.1 y 0x000000000040072e in add(int) at \ py-breakpoint.c:39 2.2 y 0x00007ffff7b131de in \ (anonymous namespace)::fast_float::bigint::add at \ ../../../../../libstdc++-v3/src/c++17/fast_float/fast_float.h:1815 ... 2.7 y 0x00007ffff7b137e4 in \ (anonymous namespace)::fast_float::bigint::add at \ ../../../../../libstdc++-v3/src/c++17/fast_float/fast_float.h:1815 ... Fix this by using qualified=True. Tested on x86_64-linux. PR testsuite/29910 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29910 2023-01-02 Mike Frysinger sim: replace -I$srcroot/bfd include with -I$srcroot Clean up includes a bit by making ports include bfd/ headers explicitly. This matches other projects, and makes it more clear where these headers are coming from. sim: replace -I$srcroot/opcodes include with -I$srcroot Clean up includes a bit by making ports include opcodes/ headers explicitly. This matches other projects, and makes it more clear where these headers are coming from. 2023-01-02 Alan Modra obsolete target tidy Delete a few files only used for obsolete targets, and tidy config, xfails and other pieces of support specific to those targets. And since I was editing target triplets in test files, fix the nm alpha-linuxecoff fails. 2023-01-02 GDB Administrator Automatic date update in version.in 2023-01-01 Mike Frysinger sim: build: drop unused SIM_EXTRA_LIBS Now that all run binaries are linked in the topdir, this subdir libs variable isn't used anywhere, so punt it. sim: erc32: drop -I$(srcroot) Since the port doesn't actually use this include, drop it. No other port is doing this either. sim: drop mention of & support for subdir configure Now that no ports use these common configure APIs, delete the logic and remove it from the documentation. sim: refresh copyright dates a bit Update a few files that were missed, and revert the generated Automake output that uses dates from Automake itself. sim: or1k: drop unused rules These rules are the same as the common ones, so drop them to simplify. sim: iq2000: drop unused cpu define logic These defines seem to have been added in anticipation of adding another cpu port (IQ10BF?), but that was over 20 years ago, and that port has yet to materialize. So drop these compile flags since they don't do anything to the generated code. If another port ever shows up, it's easy enough to readd things as needed. 2023-01-01 Joel Brobecker manual copyright year range of various GDB files to add 2023 This commit updates the following file... gdb/doc/gdb.texinfo gdb/doc/refcard.tex gdb/syscalls/update-netbsd.sh ... by hand as instructed by the gdb/copyright.py script. The update by hand is needed because the copyright headers to update are actually nested inside those files, rather than located at the start of the file. 2023-01-01 Joel Brobecker Update copyright year range in header of all files managed by GDB This commit is the result of running the gdb/copyright.py script, which automated the update of the copyright year range for all source files managed by the GDB project to be updated to include year 2023. 2023-01-01 Joel Brobecker gdb/copyright.py: Adjust following rename of sim/ppc/ppc-instructions... ... to sim/ppc/powerpc.igen This file is in the NOT_FSF_LIST because this file has a copyright which is not assigned to the FSF. Since the file got renamed, the corresponding entry in NOT_FSF_LIST needs to be renamed as well. 2023-01-01 Joel Brobecker Update copyright year in help message of gdb, gdbserver, gdbreplay This commit updates the copyright year displayed by gdb, gdbserver and gdbreplay's help message from 2022 to 2023, as per our Start of New Year procedure. The corresponding source files' copyright header are also updated accordingly. 2023-01-01 Alan Modra Update year range in gprofng copyright notices This adds 'Innovative Computing Labs' as an external author to update-copyright.py, to cover the copyright notice in gprofng/common/opteron_pcbe.c, and uses that plus another external author 'Oracle and' to update gprofng copyright dates. I'm not going to commit 'Oracle and' as an accepted author, but that covers the string "Copyright (c) 2006, 2012, Oracle and/or its affiliates. All rights reserved." found in gprofng/testsuite/gprofng.display/jsynprog files. Update year range in copyright notice of binutils files The newer update-copyright.py fixes file encoding too, removing cr/lf on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and embedded cr in binutils/testsuite/binutils-all/ar.exp string match. 2023-01-01 Alan Modra Update etc/update-copyright.py This picks up some improvements from gcc/contrib. exceptions must derive from BaseException, port to python3, retain original file mode, fix name of script in examples. Adds libsframe to list of default dirs. I would have added gprofng too but there are some files claiming copyright by authors other than the Free Software Foundation. 2023-01-01 GDB Administrator Automatic date update in version.in 2022-12-31 Nick Clifton Update version numbers in howto-make-a-release document Update version number and regenerate files Add markers for 2.40 branch sync libiberty sources with gcc mainline 2022-12-31 Tom de Vries [gdb/cli] Add maintenance ignore-probes There's a command "disable probes", but SystemTap probes, for instance libc:longjmp cannot be disabled: ... $ gdb -q -batch a.out -ex start -ex "disable probes libc ^longjmp$" ... Probe libc:longjmp cannot be disabled. Probe libc:longjmp cannot be disabled. Probe libc:longjmp cannot be disabled. ... Add a command "maintenance ignore-probes" that ignores probes during get_probes, such that we can easily pretend to use a libc without the libc:longjmp probe: ... (gdb) maint ignore-probes -verbose libc ^longjmp$ ignore-probes filter has been set to: PROVIDER: 'libc' PROBE_NAME: '^longjmp$' OBJNAME: '' (gdb) start ^M ... Ignoring SystemTap probe libc longjmp in /lib64/libc.so.6.^M Ignoring SystemTap probe libc longjmp in /lib64/libc.so.6.^M Ignoring SystemTap probe libc longjmp in /lib64/libc.so.6.^M ... The "Ignoring ..." messages can be suppressed by not using -verbose. Note that as with "disable probes", running simply "maint ignore-probes" ignores all probes. The ignore-probes filter can be reset by using: ... (gdb) maint ignore-probes -reset ignore-probes filter has been reset ... For now, the command is only supported for SystemTap probes. PR cli/27159 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27159 2022-12-31 Mark Harmstone ld/testsuite: Don't add index to sizes in pdb.exp ld: Handle LF_VFTABLE types in PDBs 2022-12-31 Mark Harmstone ld: Handle extended-length data structures in PDB types A few fixes to minor issues I've discovered in my PDB patches. * If sizes or offsets are greater than 0x8000, they get encoded as extended values in the same way as for enum values - e.g. a LF_ULONG .short followed by a .long. * I've managed to coax MSVC to produce another type, LF_VFTABLE, which is seen when dealing with COM. I don't think LLVM emits this. Note that we can't just implement everything in Microsoft's header files, as most of it is obsolete. * Fixes a stupid bug in the test program, where I was adding an index to a size. The index was hard-coded to 0, so this didn't cause any actual issues. 2022-12-31 Nick Clifton Updated Romanian translation for the binutils sub-directory 2022-12-31 Tom de Vries [gdb/python] Fix gdb.python/py-finish-breakpoint2.exp for -m32 [ Partial resubmission of an earlier submission by Andrew ( https://sourceware.org/pipermail/gdb-patches/2012-September/096347.html ), so listing him as co-author. ] With x86_64-linux and target board unix/-m32, we have: ... (gdb) continue^M Continuing.^M Exception #10^M ^M Breakpoint 3, throw_exception_1 (e=10) at py-finish-breakpoint2.cc:23^M 23 throw new int (e);^M (gdb) FAIL: gdb.python/py-finish-breakpoint2.exp: \ check FinishBreakpoint in catch() ... The following scenario happens: - set breakpoint in throw_exception_1, a function that throws an exception - continue - hit breakpoint, with call stack main.c:38 -> throw_exception_1 - set a finish breakpoint - continue - hit the breakpoint again, with call stack main.c:48 -> throw_exception -> throw_exception_1 Due to the exception, the function call did not properly terminate, and the finish breakpoint didn't trigger. This is expected behaviour. However, the intention is that gdb detects this situation at the next stop and calls the out_of_scope callback, which would result here in this test-case in a rather confusing "exception did not finish" message. So the problem is that this message doesn't show up, in other words, the out_of_scope callback is not called. [ Note that the fact that the situation is detected only at the next stop (wherever that happens to be) could be improved upon, and the earlier submission did that by setting a longjmp breakpoint. But I'm considering this problem out-of-scope for this patch. ] Note that the message does show up later, at thread exit: ... [Inferior 1 (process 20046) exited with code 0236]^M exception did not finish ...^M ... The decision on whether to call the out_of_scope call back is taken in bpfinishpy_detect_out_scope_cb, and the interesting bit is here: ... if (b->pspace == current_inferior ()->pspace && (!target_has_registers () || frame_find_by_id (b->frame_id) == NULL)) bpfinishpy_out_of_scope (finish_bp); ... In the case of the thread exit, the callback triggers because target_has_registers () == 0. So why doesn't the callback trigger in the case of the breakpoint? Well, the b->frame_id is the frame_id of the frame of main (the frame in which the finish breakpoint is supposed to trigger), so AFAIU frame_find_by_id (b->frame_id) == NULL will only be true once we've left main, at which point I guess we don't stop till thread exit. Fix this by saving the frame in which the finish breakpoint was created, and using frame_find_by_id () == NULL on that frame instead, such that we have: ... (gdb) continue^M Continuing.^M Exception #10^M ^M Breakpoint 3, throw_exception_1 (e=10) at py-finish-breakpoint2.cc:23^M 23 throw new int (e);^M exception did not finish ...^M (gdb) FAIL: gdb.python/py-finish-breakpoint2.exp: \ check FinishBreakpoint in catch() ... Still, the test-case is failing because it's setup to match the behaviour that we get on x86_64-linux with target board unix/-m64: ... (gdb) continue^M Continuing.^M Exception #10^M stopped at ExceptionFinishBreakpoint^M (gdb) PASS: gdb.python/py-finish-breakpoint2.exp: \ check FinishBreakpoint in catch() ... So what happens here? Again, due to the exception, the function call did not properly terminate, but the finish breakpoint still triggers. This is somewhat unexpected. This happens because it just so happens to be that the frame return address at which the breakpoint is set, is also the first instruction after the exception has been handled. This is a know problem, filed as PR29909, so KFAIL it, and modify the test-case to expect the out_of_scope callback. Also add a breakpoint after setting the finish breakpoint but before throwing the exception, to check that we don't call the out_of_scope callback too early. Tested on x86_64-linux, with target boards unix/-m32. Co-Authored-By: Andrew Burgess PR python/27247 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27247 2022-12-31 Tom de Vries [gdb/testsuite] Fix gdb.base/print-symbol-loading.exp on ubuntu 22.04.1 On ubuntu 22.04.1 x86_64, I run into: ... (gdb) PASS: gdb.base/print-symbol-loading.exp: shlib off: \ set print symbol-loading off sharedlibrary .*^M Symbols already loaded for /lib/x86_64-linux-gnu/libc.so.6^M Symbols already loaded for /lib/x86_64-linux-gnu/libpthread.so.0^M (gdb) FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib ... The test-case expects the libc.so line, but not the libpthread.so line. However, we have: ... $ ldd /lib/x86_64-linux-gnu/libc.so.6 linux-vdso.so.1 (0x00007ffd7f7e7000) libgtk3-nocsd.so.0 => /lib/x86_64-linux-gnu/libgtk3-nocsd.so.0 (0x00007f4468c00000) /lib64/ld-linux-x86-64.so.2 (0x00007f4469193000) libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f4468f3e000) libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f4468f39000) ... so it's not unexpected that libpthread.so is loaded if libc.so is loaded. Fix this by accepting the libpthread.so line. Tested on x86_64-linux. PR testsuite/29919 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29919 2022-12-31 Tom de Vries [gdb/testsuite] Replace deprecated pthread_yield in gdb.threads/watchpoint-fork.exp On Ubuntu 22.04.1 x86_64, with glibc 2.35 I run into: ... watchpoint-fork-mt.c: In function 'start':^M watchpoint-fork-mt.c:67:7: warning: 'pthread_yield' is deprecated: \ pthread_yield is deprecated, use sched_yield instead \ [-Wdeprecated-declarations]^M 67 | i = pthread_yield ();^M | ^^M ... Fix this as suggested, by using sched_yield instead. Tested on x86_64-linux. 2022-12-31 Tom de Vries [gdb/testsuite] Fix gdb.base/corefile.exp with glibc 2.35 On Ubuntu 22.04.1 x86_64 (with glibc 2.35), I run into: ... (gdb) PASS: gdb.base/corefile.exp: $_exitcode is void bt^M #0 __pthread_kill_implementation (...) at ./nptl/pthread_kill.c:44^M #1 __pthread_kill_internal (...) at ./nptl/pthread_kill.c:78^M #2 __GI___pthread_kill (...) at ./nptl/pthread_kill.c:89^M #3 0x00007f4985e1a476 in __GI_raise (...) at ../sysdeps/posix/raise.c:26^M #4 0x00007f4985e007f3 in __GI_abort () at ./stdlib/abort.c:79^M #5 0x0000556b4ea4b504 in func2 () at gdb.base/coremaker.c:153^M #6 0x0000556b4ea4b516 in func1 () at gdb.base/coremaker.c:159^M #7 0x0000556b4ea4b578 in main (...) at gdb.base/coremaker.c:171^M (gdb) PASS: gdb.base/corefile.exp: backtrace up^M #1 __pthread_kill_internal (...) at ./nptl/pthread_kill.c:78^M 78 in ./nptl/pthread_kill.c^M (gdb) FAIL: gdb.base/corefile.exp: up ... The problem is that the regexp used here: ... gdb_test "up" "#\[0-9\]* *\[0-9xa-fH'\]* in .* \\(.*\\).*" "up" ... does not fit the __pthread_kill_internal line which lacks the instruction address due to inlining. Fix this by making the regexp less strict. Tested on x86_64-linux. 2022-12-31 GDB Administrator Automatic date update in version.in 2022-12-30 Tom de Vries [gdb/testsuite] Fix gdb.threads/dlopen-libpthread.exp for upstream glibc On ubuntu 22.04.1 x86_64, I run into: ... (gdb) info probes all rtld rtld_map_complete^M No probes matched.^M (gdb) XFAIL: gdb.threads/dlopen-libpthread.exp: info probes all rtld rtld_map_complete UNTESTED: gdb.threads/dlopen-libpthread.exp: no matching probes ... This has been filed as PR testsuite/17016. The problem is that the name rtld_map_complete is used, which was only available in Fedora 17, and upstream the name map_complete was used. In the email thread discussing a proposed patch ( https://sourceware.org/legacy-ml/gdb-patches/2014-09/msg00712.html ) it was suggested to make the test-case handle both names. So, handle both names: map_complete and rtld_map_complete. This exposes the following FAIL: ... (gdb) info sharedlibrary^M From To Syms Read Shared Object Library^M $hex $hex Yes /lib64/ld-linux-x86-64.so.2^M $hex $hex Yes (*) /lib/x86_64-linux-gnu/libgtk3-nocsd.so.0^M $hex $hex Yes /lib/x86_64-linux-gnu/libc.so.6^M $hex $hex Yes /lib/x86_64-linux-gnu/libdl.so.2^M $hex $hex Yes /lib/x86_64-linux-gnu/libpthread.so.0^M (*): Shared library is missing debugging information.^M (gdb) FAIL: gdb.threads/dlopen-libpthread.exp: libpthread.so not found ... due to using a glibc (v2.35) that has libpthread integrated into libc. Fix this by changing the FAIL into UNSUPPORTED. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17016 2022-12-30 Tom de Vries [gdb/testsuite] Fix gdb.reverse/step-indirect-call-thunk.exp with -fcf-protection On Ubuntu 22.04.1 x86_64, I run into: ... gdb.reverse/step-indirect-call-thunk.c: In function 'inc':^M gdb.reverse/step-indirect-call-thunk.c:22:1: error: '-mindirect-branch' and \ '-fcf-protection' are not compatible^M 22 | { /* inc.1 */^M | ^^M ... Fix this by forcing -fcf-protection=none, if supported. Tested on x86_64-linux. 2022-12-30 Tom de Vries [gdb/testsuite] Fix gdb.cp/step-and-next-inline.exp with -fcf-protection On Ubuntu 22.04.1 x86_64, I run into: ... (gdb) PASS: gdb.cp/step-and-next-inline.exp: no_header: not in inline 1 next^M 51 if (t != NULL^M (gdb) FAIL: gdb.cp/step-and-next-inline.exp: no_header: next step 1 ... This is due to -fcf-protection, which adds the endbr64 at the start of get_alias_set: ... 0000000000001180 <_Z13get_alias_setP4tree>: 1180: f3 0f 1e fa endbr64 1184: 48 85 ff test %rdi,%rdi ... so the extra insn gets an is-stmt line number entry: ... INDEX LINE ADDRESS IS-STMT PROLOGUE-END ... 11 50 0x0000000000001180 Y 12 50 0x0000000000001180 13 51 0x0000000000001184 Y 14 54 0x0000000000001184 ... and when stepping into get_alias_set we step to line 50: ... (gdb) PASS: gdb.cp/step-and-next-inline.exp: no_header: in main step^M get_alias_set (t=t@entry=0x555555558018 ) at step-and-next-inline.cc:50^M 50 {^M ... In contrast, with -fcf-protection=none, we get: ... 0000000000001170 <_Z13get_alias_setP4tree>: 1170: 48 85 ff test %rdi,%rdi ... and: ... INDEX LINE ADDRESS IS-STMT PROLOGUE-END ... 11 50 0x0000000000001170 Y 12 51 0x0000000000001170 Y 13 54 0x0000000000001170 ... so when stepping into get_alias_set we step to line 51: ... (gdb) PASS: gdb.cp/step-and-next-inline.exp: no_header: in main step^M get_alias_set (t=t@entry=0x555555558018 ) at step-and-next-inline.cc:51^M 51 if (t != NULL^M ... Fix this by rewriting the gdb_test issuing the step command to check which line the step lands on, and issuing an extra next if needed. Tested on x86_64-linux, both with and without -fcf-protection=none. PR testsuite/29920 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29920 2022-12-30 Tom de Vries [gdb/symtab] Make comp_unit_head.length private Make comp_unit_head.length private, to enforce using accessor functions. Replace accessor function get_length with get_length_with_initial and get_length_without_initial, to make it explicit which variant we're using. Tested on x86_64-linux. PR symtab/29343 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29343 2022-12-30 Alan Modra PR29948, heap-buffer-overflow in display_debug_lines_decoded This fixes a couple of places in display_debug_lines_decoded that were off by one in checking DWARF5 .debug_line directory indices. It also displays the DWARF5 entry 0 for the program current directory rather than "." as is done for pre-DWARF5. I decided against displaying DW_AT_comp_dir for pre-DWARF5 since I figure it is better for readelf to minimally interpret debug info. binutils/ PR 29948 * dwarf.c (display_debug_lines_decoded): Display the given directory entry 0 for DWARF5. Properly check directory index against number of entries in the table. Revert to using unsigned int for n_directories and associated variables. Correct warning messages. gas/ * testsuite/gas/elf/dwarf-5-loc0.d: Update. 2022-12-30 GDB Administrator Automatic date update in version.in 2022-12-29 Tsukasa OI RISC-V: Simplify riscv_csr_address logic on state enable extensions This commit makes CSR class handling for 'Smstateen' and 'Ssstateen' extensions simpler using fall-throughs (as used in CSR_CLASS_I{,_32}). gas/ChangeLog: * config/tc-riscv.c (riscv_csr_address): Simplify the logic for 'Smstateen' and 'Ssstateen' extensions. 2022-12-29 GDB Administrator Automatic date update in version.in 2022-12-28 Tom Tromey Use $decimal in timestamp.exp This patch fixes a review comment by Tom de Vries. He pointed out that the new timestamp.exp should use the $decimal convenience regexp. 2022-12-28 Tom Tromey Fix "set debug timestamp" PR cli/29945 points out that "set debug timestamp 1" stopped working -- this is a regression due to commit b8043d27 ("Remove a ui-related memory leak"). This patch fixes the bug and adds a regression test. I think this should probably be backported to the gdb 13 branch. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29945 2022-12-28 GDB Administrator Automatic date update in version.in 2022-12-27 H.J. Lu x86-64: Allocate input section memory if needed When --no-keep-memory is used, the input section memory may not be cached. Allocate input section memory for -z pack-relative-relocs if needed. bfd/ PR ld/29939 * elfxx-x86.c (elf_x86_size_or_finish_relative_reloc): Allocate input section memory if needed. ld/ PR ld/29939 * testsuite/ld-elf/dt-relr-2i.d: New test. 2022-12-27 Christoph Müllner RISC-V: Fix T-Head Fmv vendor extension encoding A recent change in the XTheadFmv spec fixed an encoding bug in the document. This patch changes the code to follow this bugfix. Spec patch can be found here: https://github.com/T-head-Semi/thead-extension-spec/pull/11 2022-12-27 Tom Tromey Handle SIGSEGV in gdb selftests The gdb.gdb self-tests were timing out for me, which turned out to be PR testsuite/29325. Looking into it, the problem is that the version of the Boehm GC that is used by Guile on my machine causes a SEGV during stack probing. This unexpected stop confuses the tests and causes repeated timeouts. This patch adapts the two failing tests. This makes them work for me, and reduces the running time of gdb.gdb from 20 minutes to about 11 seconds. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29325 2022-12-27 Mike Frysinger sim: build: clean up unused codegen logic Now that all igen ports are in the top-level makefile, we don't need this logic in any subdirs anymore, so clean it up. sim: mips: hoist "multi" igen rules up to common builds Since these are the last mips igen rules, we can clean up a number of bits in the local Makefile.in. sim: mips: hoist "m16" igen rules up to common builds sim: mips: hoist "single" igen rules up to common builds sim: mips: rename "igen" generation mode to "single" The naming in here has grown organically and is confusing to follow. Originally there was only one set of rules for generating code from the igen sources, so calling it "tmp-igen" and such made sense. But when other multigen modes were added ("m16" & "multi") which also used igen, it's not clear what's common igen and what's specific to this generation mode. So rename the set of rules from "igen" to "single" so it's easier to follow. sim: mips: hoist itable igen rules up to common builds Since this rule is pretty simple, hoist it up to the common build. 2022-12-27 Mike Frysinger sim: mips: unify itable generation (a bit) The m16 & multi targets generate itable once even when all the other modules are generated multiple times. The default igen target will generate itable with everything else out of convenience. This means flags are passed which don't affect the generated itable there. We can unify the itable generation by making sure the right -F/-M filter variables are passed down. Since there's already a dedicated rule & variable in the multi build mode, generalize that and switch the m16 & igen builds over too. I spent a lot of time staring at this code, building for diff mips targets, and exploring all the shell code paths. I think this is safe, but only time (and users) will really tell. 2022-12-27 Mike Frysinger sim: mips: rename multi_flags to igen_itable_flags This variable is only used to generate the itable files. In preparation for merging the itable logic among all ports, rename "multi_flags" to a more appropriate "igen_itable_flags" variable. There should be no real chagnes here otherwise. sim: mips: drop unused micromips igen logic This code appears to be unused since it was first merged. When micromips was enabled, it was via the "MULTI" config, not the "MICROMIPS" config, and the multi configs have sep vars. Since nothing sets SIM_MIPS_GEN=MICROMIPS in the config, all of this should be unreachable, so punt it to simplify. Further, the SIM_MIPS_MICROMIPS16_FLAGS & SIM_MIPS_MICROMIPS_FLAGS settings rely on sim_mips_micromips{,16}_{filter,machine} variables that are never set in the configure script. 2022-12-27 GDB Administrator Automatic date update in version.in 2022-12-26 Tom Tromey Add initializers to comp_unit_head PR symtab/29343 points out that it would be beneficial if comp_unit_head had a constructor and used initializers. This patch implements this. I'm unsure if this is sufficient to close the bug, but at least it's a step. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29343 2022-12-26 Alan Modra bfd/dwarf2.c: allow use of DWARF5 directory entry 0 I think the test for table->files[file].dir being non-zero is wrong for DWARF5 where index zero is allowed and is the current directory of the compilation. Most times this will be covered by the use of table->comp_dir (from DW_AT_comp_dir) in concat_filename but the point of putting the current dir in .debug_line was so the section could stand alone without .debug_info. Also, there is no need to check for table->dirs non-NULL, the table->num_dirs test is sufficient. * dwarf2.c (concat_filename): Correct and simplify tests of directory index. 2022-12-26 Flavio Cruz Add support for x86_64-*-gnu-* targets to build x86_64 gnumach/hurd 2022-12-26 GDB Administrator Automatic date update in version.in 2022-12-25 Mike Frysinger sim: build: drop support for subdir distclean All ports that need to clean things up at distclean time have moved to the top-level build, so we can drop support for this hook. sim: mips: move distclean settings to common build This was missed when mips/configure was merged into the top-level. 2022-12-25 Indu Bhagat libsframe: write out SFrame FRE start address correctly The following test was failing on ppc64 and s390x: "FAIL: encode-1: Encode buffer match" The offending stub was how we memcpy the FRE start address to the buffer (on-disk format). When the host is big-endian, the address of the source buffer for the memcpy needs to point to the uint8_t/uint16_t sized value of the FRE start addr, not uint32_t sized value; we intend to copy out only the fre_start_addr_sz number of bytes. ChangeLog: * libsframe/sframe.c (sframe_encoder_write_fre_start_addr): New function. (sframe_encoder_write_fre): Use it instead of memcpy. 2022-12-25 Mike Frysinger sim: smp: plumb igen flag down to all users While mips has respected sim_igen_smp at configure time (which was always empty since it defaulted smp to off), no other igen port did. Move this to a makefile variable and plumb it through the common IGEN_RUN variable instead so everyone gets it by default. We also clean up some redundant -N0 setting with multirun mips. sim: smp: make option available again At some point we want this to work, but it's not easy to test if the configure option isn't available. Restore it, but keep the default off. sim: cpu: change default init to handle all cpus All the runtimes were only initializing a single CPU. When SMP is enabled, things quickly crash as none of the other CPU structs are setup. Change the default from 0 to the compile time value. sim: msp430: add basic SMP cpu init There's no need to assert there's only 1 CPU when setting them all up here is trivial. sim: m32r: fix iterator typo when setting up cpus This code loops over available cpus with "c", but then looks up the cpu with "i". Fix the typo so the code works correctly with smp. sim: v850: fix SMP compile The igen tool sets up the SD & CPU defines for code fragments to use, but v850 was expecting "sd". Change all the igen related code to use SD so it actually compiles, and fix a few places to use "CPU" instead of hardcoding cpu0. sim: or1k: fix iterator typo when setting up cpus This code loops over available cpus with "c", but then looks up the cpu with "i". Fix the typo so the code works correctly with smp. sim: mn10300: fix SMP compile The igen tool sets up the SD define for code fragments to use, but mn10300 was expecting "sd". Change all the igen related code to use SD so it actually compiles. sim: cpu: fix SMP msg prefix helper This code fails to compile when SMP is enabled due to some obvious errors. Fix those and change the logic to avoid CPP to prevent any future rot from creeping back in. sim: mips: clean up a bit after mips/configure removal Now that there is no subdir configure script, we can clean up some logic that was spread between the files. sim: mips: move igen settings to top-level configure This is the last bit of logic that exists in the mips configure script, so move it to the top-level configure to kill it off. We still have to move the Makefile.in igen logic to local.mk, but this is a required first step for that. sim: mips: namespace igen configure vars To prepare moving this logic to the top-level configure, the vars need to be namespaced. Do that here to make it easier to review. Basically sim_xxx -> SIM_MIPS_XXX when a var is exported from the configure script to the Makefile, and sim_xxx -> sim_mips_xxx when the var is internal in the configure script. sim: mips: add igen recursive dep Make sure the igen tool exists before trying to compile the mips subdir. This happens to work when mips has a subconfigure, but hits a race condition when that is removed. sim: mips: drop unused ENGINE_ISSUE_POSTFIX_HOOK Nothing defines this, and it isn't called in all the engine runtimes, so drop it entirely to avoid confusion. sim: igen: drop move-if-changed usage Now that igen itself has this logic, drop these custom build rules to greatly simplify. sim: igen: support in-place updates ourself Every file that igen outputs is then processed with the move-if-changed shell script. This creates a lot of boilerplate in the build and not an insignificant amount of build-time overhead. Move the simple "is the file changed" logic into igen itself. sim: igen: constify itable data structures These are const data arrays of strings and numbers. We don't want or need them to be writable, so mark them all const. 2022-12-25 GDB Administrator Automatic date update in version.in 2022-12-24 Andrew Burgess gdb/testsuite: fix buffer overflow in gdb.base/signed-builtin-types.exp In commit: commit 9f50fe0835850645bd8ea9bb1efe1fe6c48dfb12 Date: Wed Dec 7 15:55:25 2022 +0000 gdb/testsuite: new test for recent dwarf reader issue A new test (gdb.base/signed-builtin-types.exp) was added that made use of 'info sources' to figure out if the debug information for a particular object file had been fully expanded or not. Unfortunately some lines of the 'info sources' output can be very long, this was observed on some systems where the debug information for the dynamic-linker was installed, in this case, the list of source files associated with the dynamic linker was so long it would cause expect's internal buffer to overflow. This commit switches from using 'info sources' to 'maint print objfile', the output from the latter command is more compact, but also, can be restricted to a single named object file. With this change in place I am no longer seeing buffer overflow errors from expect when running gdb.base/signed-builtin-types.exp. 2022-12-24 Mike Frysinger sim: or1k: move arch-specific settings to internal header There's no need for these settings to be in sim-main.h which is shared with common/ sim code, so move it all out to the existing or1k-sim.h. Unfortunately, we can't yet drop the or1k-sim.h include from sim-main.h as many of the generated CGEN files refer only to sim-main.h. We'll have to improve the CGEN interface before we can make more progress, but this is at least a minor improvement. 2022-12-24 GDB Administrator Automatic date update in version.in 2022-12-23 Tom Tromey Use bool for dwarf2_has_info This changes dwarf2_has_info to return bool. 2022-12-23 Indu Bhagat libsframe: testsuite: fix memory leaks in testcases ChangeLog: * libsframe/testsuite/libsframe.decode/be-flipping.c: Free SFrame buffer. * libsframe/testsuite/libsframe.decode/frecnt-1.c: Likewise. * libsframe/testsuite/libsframe.decode/frecnt-2.c: Likewise. 2022-12-23 Indu Bhagat libsframe: fix a memory leak in sframe_decode sframe_decode () needs to malloc a temporary buffer of the same size as the input buffer (containing the SFrame section bytes) when endian flipping is needed. The decoder keeps the endian flipped contents in this buffer for its usage. This code is necessary when the target endianneess is not the same as host endianness. The malloc'd buffer needs to be kept track of, so that it can freed up in sframe_decoder_free () later. ChangeLog: * libsframe/sframe-impl.h (struct sframe_decoder_ctx): Add new member to keep track of the internally malloc'd buffer. * libsframe/sframe.c (sframe_decoder_free): Free it up. (sframe_decode): Update the reference to the buffer. 2022-12-23 Simon Marchi gdb/testsuite: remove MPFR detection in gdb.base/float128.exp I see this fail since commit 991180627851 ("Use toplevel configure for GMP and MPFR for gdb"): FAIL: gdb.base/float128.exp: show configuration The test fails to find --with-mpfr or --without-mpfr in the "show configuration" output. Since MPFR has become mandatory, we can just remove that check and simplify the test to assume MPFR support is there. Change-Id: I4f3458470db0029705b390dfefed3a66dfc0633a Approved-By: Tom de Vries 2022-12-23 Mike Frysinger sim: m32r: move arch-specific settings to internal header There's no need for these settings to be in sim-main.h which is shared with common/ sim code, so move it all out to the existing m32r-sim.h. Unfortunately, we can't yet drop the m32r-sim.h include from sim-main.h as many of the generated CGEN files refer only to sim-main.h. We'll have to improve the CGEN interface before we can make more progress, but this is at least a minor improvement. sim: bfin: move arch-specific settings to internal header There's no need for these settings to be in sim-main.h which is shared with common/ sim code, so drop the bfin.h include and move the remaining bfin-specific settings into it. sim: m68hc11: move arch-specific settings to internal header There's no need for these settings to be in sim-main.h which is shared with common/ sim code, so move it all out to a new header which only this port will include. sim: sh: move arch-specific settings to internal header There's no need for these settings to be in sim-main.h which is shared with common/ sim code, so move it all out to a new header which only this port will include. sim: mcore: move arch-specific settings to internal header There's no need for these settings to be in sim-main.h which is shared with common/ sim code, so move it all out to a new header which only this port will include. sim: h8300: move arch-specific settings to internal header There's no need for these settings to be in sim-main.h which is shared with common/ sim code, so move it all out to a new header which only this port will include. sim: pru: move arch-specific settings to internal header There's no need for these settings to be in sim-main.h which is shared with common/ sim code, so drop the pru.h include and move the remaining pru-specific settings into it. 2022-12-23 Mike Frysinger sim: mn10300: standardize the arch-specific settings a little Rename mn10300_sim.h to mn10300-sim.h to match other ports, and move most of the arch-specific content out of sim-main.h to it. This isn't a big win though as we still have to include the header in sim-main.h due to the igen interface: it hardcodes including sim-main.h in its files. So until we can fix that, we have to keep bleeding these settings into the common codes. Also take the opportunity to purge a lot of unused headers from these. The local modules should already include the right headers, so there's no need to force everyone to pull them in. A lot of this is a hold over from the pre-igen days of this port. 2022-12-23 Mike Frysinger sim: microblaze: move arch-specific settings to internal header There's no need for these settings to be in sim-main.h which is shared with common/ sim code, so move it all out to a new header which only this port will include. sim: example-synacor: move arch-specific settings to internal header There's no need for these settings to be in sim-main.h which is shared with common/ sim code, so move it all out to a new header which only this port will include. sim: moxie: move arch-specific settings to internal header There's no need for these settings to be in sim-main.h which is shared with common/ sim code, so move it all out to a new header which only this port will include. 2022-12-23 Mike Frysinger sim: riscv: move arch-specific settings to internal header There's no need for these settings to be in sim-main.h which is shared with common/ sim code, so move it all out to a new header which only this port will include. We can also move the machs.h include out since the model logic was all generalized from compile-time to runtime last year. 2022-12-23 Mike Frysinger sim: v850: standardize the arch-specific settings a little Rename v850_sim.h to v850-sim.h to match other ports, and move most of the arch-specific content out of sim-main.h to it. This isn't a big win though as we still have to include the header in sim-main.h due to the igen interface: it hardcodes including sim-main.h in its files. So until we can fix that, we have to keep bleeding these settings into the common codes. 2022-12-23 Mike Frysinger sim: msp430: move arch-specific settings to internal header There's no need for these settings to be in sim-main.h which is shared with common/ sim code, so drop the msp430-sim.h include and move it to the few files that actually need it. While we're here, drop redundant includes from sim-main.h: * sim-config.h & sim-types.h included by sim-basics.h already * sim-engine.h included by sim-base.h already And move sim-options.h to the one file that needs it. 2022-12-23 Mike Frysinger sim: ft32: move arch-specific settings to internal header There's no need for these settings to be in sim-main.h which is shared with common/ sim code, so drop the ft32-sim.h include and move it to the few files that actually need it. 2022-12-23 Mike Frysinger sim: d10v: move arch-specific settings to internal header There's no need for these settings to be in sim-main.h which is shared with common/ sim code, so drop the d10v_sim.h include and move it to the few files that actually need it. Also rename the file to standardize it a bit better with other ports. 2022-12-23 Mike Frysinger sim: cr16: move arch-specific settings to internal header There's no need for these settings to be in sim-main.h which is shared with common/ sim code, so drop the cr16_sim.h include and move it to the few files that actually need it. Also rename the file to standardize it a bit better with other ports. 2022-12-23 Mike Frysinger sim: arm: move arch-specific settings to internal header There's no need for these settings to be in sim-main.h which is shared with common/ sim code, so move it all out to a new header which only this port will include. The BIT override would be better in the place where it's redefined, so move it to armdefs.h instead. 2022-12-23 Mike Frysinger sim: aarch64: move arch-specific settings to internal header There's no need for these settings to be in sim-main.h which is shared with common/ sim code, so move it all out to a new header which only this port will include. While we're here, drop redundant includes from sim-main.h: * sim-types.h is included by sim-base.h already * sim-base.h is included twice * sim-io.h is included by sim-base.h already 2022-12-23 Mike Frysinger sim: avr: move arch-specific settings to internal header There's no need for these settings to be in sim-main.h which is shared with common/ sim code, so move it all out to a new header which only this port will include. 2022-12-23 Nick Clifton Fix illegal memory access parsing corrupt DWARF information. PR 29936 * dwarf2.c (concat_filename): Fix check for a directory index off the end of the directory table. 2022-12-23 Eli Zaretskii Fix MinGW build using mingw.org's MinGW This allows to build GDB even though the default value of _WIN32_WINNT is lower than the one needed to expose some new APIs used here, and leave the test for their actual support to run time. * gdb/nat/windows-nat.c (EXTENDED_STARTUPINFO_PRESENT): Define if not defined. (create_process_wrapper): Use 'gdb_lpproc_thread_attribute_list' instead of 'PPROC_THREAD_ATTRIBUTE_LIST' (which might not be defined at compile time). This fixes compilation error using mingw.org's MinGW. 2022-12-23 Mark Harmstone ld: Write linker symbols in PDB ld: Copy other symbols into PDB file ld: Write globals stream in PDB ld: Parse LF_UDT_SRC_LINE records when creating PDB file ld: Write types into IPI stream of PDB ld: Write types into TPI stream of PDB ld: Write DEBUG_S_LINES entries in PDB file ld: Fix segfault in populate_publics_stream ld: Write DEBUG_S_FILECHKSMS entries in PDBs ld: Generate PDB string table 2022-12-23 Alan Modra pdb build fixes Enable compilation of ld/pdb.c just for x86, as is done for bfd/pdb.c. This reduces the size of ld and is necessary with the following patches that call a COFF-only bfd function from ld/pdb.c. Without it we'd break every non-COFF target build. 2022-12-23 Mike Frysinger sim: lm32/m32r: drop redundant opcode/cgen.h include The xxx-desc.h header file already includes this, and it's how the other cgen ports are getting it, so drop it from these two. sim: ppc: drop unused types from sim-main.h The common sim headers should define these for us already, so there's no need for the ppc header to set them up. sim: cgen: move symcat.h include to where it's used Move this out of the global sim-main.h and to the few files that actually use functions from it. Only the cgen ports were pulling this, so this makes cgen & non-cgen behave more the same. sim: cgen: move cgen-types.h include to cgen-defs.h The cgen-types.h header sets up types that are needed by cgen-defs.h, so move the include out of sim-main.h and to that header. It might be needed in other specific modules, but for now let's kick it out of sim-main.h to make some progress. Things still build with just this. 2022-12-23 Mike Frysinger Revert "sim: mn10300: drop unused sim-main.c" This reverts commit 681a422b855e4b20086554b170dae051361f00c7. I missed that this was included via common/sim-inline.c. I thought I had grepped the top of the tree, but I must have only done mn10300. Add a comment to make it clear where/how this file is used. 2022-12-23 Mike Frysinger sim: mn10300: drop unused sim-main.c Nothing compiles or references this, so punt it. sim: endian: move bfd.h from header to source The bfd APIs are used only by sim-n-endian.h which is only included by sim-endian.c, so move the bfd.h include there and out of sim-endian.h which is included by many other modules. 2022-12-23 Mike Frysinger sim: move bfd.h include out of sim-main.h Not all arches include this in sim-main.h, and the ones that do don't actually use bfd defines in the sim-main.h header. Prune it to make sim-main.h simpler so we can kill it off entirely in the future. We add the include to the files that utilize e.g. bfd_vma though. 2022-12-23 Mike Frysinger sim: mcore: replace custom "word" type with int32_t This is a 32-bit architecture with 32-bit registers, so replace the custom "word" long int typedef with an explicit int32_t. This is a correctness fix since long will be 64-bits on most 64-bit hosts. sim: moxie: replace custom "word" type with int32_t This is a 32-bit architecture with 32-bit registers, so replace the custom "word" int typedef with an explicit int32_t. Practically speaking, this produces the same code, but it should hopefully make it easier to merge common code in the future. sim: cr16/d10v/mcore/moxie: clean up unused word & uword types Nothing actually uses these, so punt them. Some of the ports are using local "word" types, but we'll clean those up in a follow up. sim: mips: trim redundant igen settings These variables are setting the same value as the defaults. Trim this redundant logic to make it easier to see the real differences so we can try to keep unifying cases. sim: mips: merge mips64* with existing multi-run build Change the default (unhandled) mips64* targets to use the existing mips64 multi-run build. It already handles the formats, we just have to list the mips8000 bfd for it. sim: mips: merge mips64vr5000 with existing multi-run build The existing mips64vr-* multi-run build already handles mips5000 targets, so reuse that for mips64vr5* targets too. This moves more logic from build-time to runtime so we can have a single binary that supports many targets. 2022-12-23 Nelson Chu RISC-V: Relax the order checking for the architecture string * riscv-toolchain-conventions, PR, https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/14 Issue, https://github.com/riscv-non-isa/riscv-toolchain-conventions/issues/11 * Refer to the commit afc41ffb, RISC-V: Reorder the prefixed extensions which are out of order. In the past we only allow to reorder the prefixed extensions. But according to the PR 14 in the riscv-toolchain-convention, we can also relax the order checking to allow the whole extensions be written out of orders, including the single standard extensions and the prefixed multi-letter extensions. Just that we still need to follow the following rules as usual, 1. prefixed extensions need to be seperated with `_'. 2. prefixed extensions need complete . version if set. Please see the details in the march-ok-reorder gas testcase. Passed the riscv-gnu-toolchain regressions. bfd/ * elfxx-riscv.c (enum riscv_prefix_ext_class): Changed RV_ISA_CLASS_UNKNOWN to RV_ISA_CLASS_SINGLE, since everything that does not belong to the multi-keyword will possible be a single extension for the current parser. (parse_config): Likewise. (riscv_get_prefix_class): Likewise. (riscv_compare_subsets): Likewise. (riscv_parse_std_ext): Removed, and merged with riscv_parse_prefixed_ext into riscv_parse_extensions. (riscv_parse_prefixed_ext): Likewise. (riscv_parse_subset): Only need to call riscv_parse_extensions to parse both single standard and prefixed extensions. gas/ * testsuite/gas/riscv/march-fail-order-std.d: Removed since the relaxed order checking. * testsuite/gas/riscv/march-fail-order-std.l: Likewise. * testsuite/gas/riscv/march-fail-order-x-std.d: Likewise. * testsuite/gas/riscv/march-fail-order-z-std.d: Likewise. * testsuite/gas/riscv/march-fail-order-zx-std.l: Likewise. * testsuite/gas/riscv/march-fail-unknown-std.l: Updated. * testsuite/gas/riscv/march-ok-reorder.d: New testcase. 2022-12-23 Mike Frysinger sim: drop unused SIM_ADDR type [PR sim/7504] Now that sim APIs either use 64-bit addresses all the time, or more appropriate target-specific types, drop this now-unused 32-bit-only address type. Bug: https://sourceware.org/PR7504 2022-12-23 Mike Frysinger sim: mips: switch from SIM_ADDR to address_word The latter type matches the address size configured for this sim. Also take the opportunity to simplify printf logic by leveraging PRI* macros. 2022-12-23 Mike Frysinger sim: v850: switch from SIM_ADDR to address_word The latter type matches the address size configured for this sim. 2022-12-23 Mike Frysinger sim: switch sim_{read,write} APIs to 64-bit all the time [PR sim/7504] We've been using SIM_ADDR which has always been 32-bit. This means the upper 32-bit address range in 64-bit sims is inaccessible. Use 64-bit addresses all the time since we want the APIs to be stable regardless of the active arch backend (which can be 32 or 64-bit). The length is also 64-bit because it's completely feasible to have a program that is larger than 4 GiB in size/image/runtime. Forcing the caller to manually chunk those accesses up into 4 GiB at a time doesn't seem useful to anyone. Bug: https://sourceware.org/PR7504 2022-12-23 Mike Frysinger sim: use bfd_vma when reading start addr from bfd info Since SIM_ADDR is always 32-bit, it might truncate the address with 64-bit ELFs. Since we load that addr from the bfd, use the bfd_vma type which matches the bfd_get_start_address API. sim: m32r: include sim-hw.h for sim_hw_parse 2022-12-23 Alan Modra COFF build-id writes uninitialised data to file 1) The first write in write_build_id wrote rubbish past the struct external_IMAGE_DEBUG_DIRECTORY, which was later overwritten with correct data. No user visible problem there, except that tools like valgrind complain. 2) The size for the pdb name was incorrectly calculated. * emultempl/pe.em (write_build_id): Write the debug directory, not the entire section contents. (setup_build_id): Add size for the base name of pdb_name, not the full path. * emultempl/pep.em: Likewise. * testsuite/ld-pe/pdb2-section-contrib.d: Update. 2022-12-23 Mike Frysinger sim: mips: merge mips64vr4300 with existing multi-run build The existing mips64vr-* multi-run build already handles mips4300 targets, so reuse that for mips64vr43* targets too. This moves more logic from build-time to runtime so we can have a single binary that supports many targets. 2022-12-23 GDB Administrator Automatic date update in version.in 2022-12-22 Indu Bhagat sframe: doc: update documentation for pauth key in SFrame FDE ChangeLog: * libsframe/doc/sframe-spec.texi 2022-12-22 Indu Bhagat gas: sframe: testsuite: add testcase for .cfi_b_key_frame This is actually a composite test that checks SFrame unwind information generation for both the .cfi_negate_ra_state and .cfi_b_key_frame directives on aarch64. ChangeLog: * testsuite/gas/cfi-sframe/cfi-sframe-aarch64-pac-ab-key-1.d: New test. * testsuite/gas/cfi-sframe/cfi-sframe-aarch64-pac-ab-key-1.s: Likewise. * testsuite/gas/cfi-sframe/cfi-sframe.exp: Run new test. 2022-12-22 Indu Bhagat objdump/readelf: sframe: emit marker for SFrame FDE with B key ChangeLog: * libsframe/sframe-dump.c (is_sframe_abi_arch_aarch64): New definition. (dump_sframe_func_with_fres): Emit a string if B key is used. 2022-12-22 Indu Bhagat gas: sframe: add support for .cfi_b_key_frame Gather the information from the DWARF FDE on whether frame's return addresses are signed using the B key or A key. Reflect the information in the SFrame counterpart data structure, the SFrame FDE. ChangeLog: * gas/gen-sframe.c (get_dw_fde_pauth_b_key_p): New definition. (sframe_v1_set_func_info): Add new argument for pauth_key. (sframe_set_func_info): Likewise. (output_sframe_funcdesc): Likewise. * gas/gen-sframe.h (struct sframe_version_ops): Add new argument to the function pointer declaration. * gas/sframe-opt.c (sframe_convert_frag): Handle pauth_key. 2022-12-22 Indu Bhagat sframe.h: add support for .cfi_b_key_frame ARM 8.3 provides five separate keys that can be used to authenticate pointers. There are two key for executable (instruction) pointers. The enum pointer_auth_key in gas/config/tc-aarch64.h currently holds two keys: enum pointer_auth_key { AARCH64_PAUTH_KEY_A, AARCH64_PAUTH_KEY_B }; Analogous to the above, in SFrame format V1, a bit is reserved in the SFrame FDE to indicate which key is used for signing the frame's return addresses: - SFRAME_AARCH64_PAUTH_KEY_A has a value of 0 - SFRAME_AARCH64_PAUTH_KEY_B has a value of 1 Note that the information in this bit will always be used along with the mangled_ra_p bit, the latter indicates whether the return addresses are mangled/contain PAC auth bits. include/ChangeLog: * sframe.h (SFRAME_AARCH64_PAUTH_KEY_A): New definition. (SFRAME_AARCH64_PAUTH_KEY_B): Likewise. (SFRAME_V1_FUNC_INFO): Adjust to accommodate pauth_key. (SFRAME_V1_FUNC_PAUTH_KEY): New macro. (SFRAME_V1_FUNC_INFO_UPDATE_PAUTH_KEY): Likewise. 2022-12-22 Jan Beulich gas: re-arrange listing output for .irp and alike It is kind of odd to have the expansions of such constructs ahead of their definition in listings with macro expansion enabled. Adjust this by pulling ahead the output of the definition lines, taking care to avoid producing a listing line for (non-existing) line 0 when the source is stdin. Note that with the code movement the conditional operator isn't necessary anymore - list->line now match up. 2022-12-22 Jan Beulich x86: correct/improve TSX controls TSXLDTRK takes RTM as a prereq. Additionally introduce an umbrella "tsx" extension option covering both RTM and HLE, paralleling the "abm" one we already have. 2022-12-22 Jan Beulich x86: add dependencies on SVME SEV-ES is an extension to SVME. SNP in turn is an extension to SEV-ES, and yet in turn RMPQUERY is a SNP extension. Note that cpu_arch[] has no SNP entry, so CPU_ANY_SNP_FLAGS remains unused (just like CPU_SNP_FLAGS already is). 2022-12-22 Jan Beulich x86: add dependencies on VMX Both EPT and VMFUNC are extensions to VMX. 2022-12-22 Jan Beulich x86: correct XSAVE* dependencies Like various other features AMX-TILE takes XSAVE as a prereq. XSAVES, unconditionally using compacted format, in turn effectively takes XSAVEC as a prereq (an SDM clarification to this effect is in the works). 2022-12-22 Jan Beulich x86: correct dependencies of a few AVX512 sub-features Like AVX512-FP16, several other extensions require wider than 16-bit mask registers. As a result they take AVX512BW as a prereq, not (just) AVX512F. Which in turn points out wrong expectations in the noavx512-1 testcase. x86: rework noavx512-1 testcase So far the set of ".noavx512*" has been accumulating, which isn't ideal. In particular this hides issues with dependencies between features. Switch back to the default ISA before disabling a particular subset. Furthermore limit redundancy by wrapping the repeated block of insns in an .irp. x86: add dependencies on AVX2 Like AVX-VNNI both VAES and VPCLMUL take AVX2 as a prereq, for operating on up to 256-bit packed integer vectors. x86: correct SSE dependencies SSE itself takes FXSR as a prereq. Like AES, PCLMUL, and SHA both GFNI and KL take SSE2 as a prereq, for operating on packed integers. And while correcting KL also record it as a prereq to WIDEKL. 2022-12-22 Jan Beulich x86: correct what gets disabled by certain ".arch .no*" Features with prereqs as well as features with dependents cannot re-use CPU_*_MASK for the 3rd argument of SUBARCH() - they need to use CPU_ANY_*_MASK in order to avoid disabling too many (when there are prereqs) and/or too few (when there are dependents) features. Generally any CPU_ANY_*_MASK which exist should not remain unused. Exceptions are - FISTTP which has no corresponding entry in cpu_arch[], - IAMCU which is a base architecture and hence uses ARCH(), not SUBARCH() (only extensions can be disabled, but unlike for Cpu*86 it would be a little more clumsy to suppress generating of the #define). 2022-12-22 Jan Beulich x86: re-work ISA extension dependency handling Getting both forward and reverse ISA dependencies right / consistent has been a permanent source of mistakes. Reduce what needs specifying manually to just the direct forward dependencies. Transitive forward dependencies as well as reverse ones are now derived and hence cannot go out of sync anymore (at least in the vast majority of cases; there are a few special cases to still take care of manually). In the course of this several CPU_ANY_*_FLAGS disappear, requiring adjustment to the assembler's cpu_arch[]. Note that to retain the correct reverse dependency of AVX512F wrt AVX512-VP2INTERSECT, the latter has the previously missing AVX512F prereq added. Note further that to avoid adding the following undue prereqs: * ATHLON, K8, and AMDFAM10 gain CMOV and FXSR, * IAMCU gains 387, auxiliary table entries (including a colon-separated modifier) are introduced in addition to the ones representing from converting the old table. To maintain forward-only dependencies between AVX (XOP) and SSE* (SSE4a) (i.e. "nosse" not disabling AVX), reverse dependency tracking is artifically suppressed. As a side effect disabling of SSE or SSE2 will now also disable AES, PCLMUL, and SHA (respective elements were missing from CPU_ANY_SSE2_FLAGS). 2022-12-22 Mike Frysinger sim: mips: match target on cpu settings We don't need to enforce larger target settings when the only thing the sim should care about is the CPU target. So reduce most of the target matches to only check the CPU. sim: mips: move fpu bitsize defines to top-level configure This drops support for the --enable-sim-float configure option, but it's not clear anyone ever actually used that. Eventually we'll want this to be a runtime option anyways. sim: mips: move bitsize defines to top-level configure Since the msb value is always defined as the wordsize-1, stop hardcoding that value directly, and use a CPP value instead. sim: mips: move subtarget defines to top-level configure We want to kill off mips/configure entirely. Move this small part out now to get started. sim: mips: always resolve active bfd mach dynamically Don't assume that the default bfd that we configured for is the one that is always active when running a program. We already have access to the real runtime value, so use it directly. This simplifies the code quite a bit, and will make it easier to support multiple mach's in a single binary. sim: hw-config.h: move generation to top-level In order to compile arch objects from the top-level, we need to generate the hw-config.h header, so move that logic up to the top level first. sim: build: hoist lists of hw devices up We need these in the top-level to generate libsim.a, but also in the subdirs to generate hw-config.h. Move it to the local.mk, and pass it down when running recursive make. This avoids duplication, and makes it available to both. We can simplify this once we move the various steps up to the top-level too. sim: build: hoist lists of common objects up In order to create libsim.a in the common dir, we need the list of objects for each target. To avoid duplicating the list with the recursive make in each port, pass it down as a variable. This is a temporary hack until the top-level creates libsim.a for ports. 2022-12-22 GDB Administrator Automatic date update in version.in 2022-12-21 Alan Modra PR29925, Memory leak in find_abstract_instance The testcase in the PR had a variable with both DW_AT_decl_file and DW_AT_specification, where the DW_AT_specification also specified DW_AT_decl_file. This leads to a memory leak as the file name is malloced and duplicates are not expected. I've also changed find_abstract_instance to not use a temp for "name", because that can result in a change in behaviour from the usual last of duplicate attributes wins. PR 29925 * dwarf2.c (find_abstract_instance): Delete "name" variable. Free *filename_ptr before assigning new file name. (scan_unit_for_symbols): Similarly free func->file and var->file before assigning. 2022-12-21 Andrew Pinski Fix compiling of top.c When I moved my last patch forward, somehow I missed removing the #endif for the HAVE_LIBMPFR case. Committed as obvious after a quick build. gdb/ChangeLog: * top.c: Remove the extra #endif which was missed. 2022-12-21 Andrew Pinski Use toplevel configure for GMP and MPFR for gdb This patch uses the toplevel configure parts for GMP/MPFR for gdb. The only thing is that gdb now requires MPFR for building. Before it was a recommended but not required library. Also this allows building of GMP and MPFR with the toplevel directory just like how it is done for GCC. We now error out in the toplevel configure of the version of GMP and MPFR that is wrong. OK after GDB 13 branches? Build gdb 3 ways: with GMP and MPFR in the toplevel (static library used at that point for both) With only MPFR in the toplevel (GMP distro library used and MPFR built from source) With neither GMP and MPFR in the toplevel (distro libraries used) Changes from v1: * Updated gdb/README and gdb/doc/gdb.texinfo. * Regenerated using unmodified autoconf-2.69 Thanks, Andrew Pinski ChangeLog: * Makefile.def: Add configure-gdb dependencies on all-gmp and all-mpfr. * configure.ac: Split out MPC checking from MPFR. Require GMP and MPFR if the gdb directory exist. * Makefile.in: Regenerate. * configure: Regenerate. gdb/ChangeLog: PR bug/28500 * configure.ac: Remove AC_LIB_HAVE_LINKFLAGS for gmp and mpfr. Use GMPLIBS and GMPINC which is provided by the toplevel configure. * Makefile.in (LIBGMP, LIBMPFR): Remove. (GMPLIBS, GMPINC): Add definition. (INTERNAL_CFLAGS_BASE): Add GMPINC. (CLIBS): Exchange LIBMPFR and LIBGMP for GMPLIBS. * target-float.c: Make the code conditional on HAVE_LIBMPFR unconditional. * top.c: Remove code checking HAVE_LIBMPFR. * configure: Regenerate. * config.in: Regenerate. * README: Update GMP/MPFR section of the config options. * doc/gdb.texinfo: Likewise. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28500 2022-12-21 Bruno Larsen gdb/c++: validate 'using' directives based on the current line When asking GDB to print a variable from an imported namespace, we only want to see variables imported in lines that the inferior has already gone through, as is being tested last in gdb.cp/nsusing.exp. However with the proposed change to gdb.cp/nsusing.exp, we get the following failures: (gdb) PASS: gdb.cp/nsusing.exp: continue to breakpoint: marker10 stop print x $9 = 911 (gdb) FAIL: gdb.cp/nsusing.exp: print x, before using statement next 15 y += x; (gdb) PASS: gdb.cp/nsusing.exp: using namespace M print x $10 = 911 (gdb) PASS: gdb.cp/nsusing.exp: print x, only using M Showing that the feature wasn't functioning properly, it just so happened that gcc ordered the namespaces in a convenient way. This happens because GDB doesn't take into account the line where the "using namespace" directive is written. So long as it shows up in the current scope, we assume it is valid. To fix this, add a new member to struct using_direct, that stores the line where the directive was written, and a new function that informs if the using directive is valid already. Unfortunately, due to a GCC bug, the failure still shows up. Compilers that set the declaration line of the using directive correctly (such as Clang) do not show such a bug, so the test includes an XFAIL for gcc code. Finally, because the final test of gdb.cp/nsusing.exp has turned into multiple that all would need XFAILs for older GCCs (<= 4.3), and that GCC is very old, if it is detected, the test just exits early. Approved-by: Tom Tromey 2022-12-21 Nick Clifton Updated Romanian translation for the BFD sub-directory. Fix an attempt to allocate an unreasonably large amount of memory when parsing a corrupt ELF file. PR 29924 * objdump.c (load_specific_debug_section): Check for excessively large sections. Keep the .drectve section when performing a relocateable link. PR 29900 * scripttempl/pe.sc: Keep the .drectve section when performing a relocateable link. * scripttempl/pep.sc: Likewise. 2022-12-21 Jan Beulich x86: rename CheckRegSize to CheckOperandSize While originally indeed used for register size checking only, the attribute has been used for memory operand size checking as well already for quite a while, with more such uses recently having been added. gprofng/testsuite: restrict testing to native configurations The binaries involved in testing gprofng are native ones, and hence a cross build of binutils won't really test intended functionality. Since this testing takes quite a bit of time (typically more than running all of binutils, gas, and ld testsuites together), restrict the testing to native configurations only. 2022-12-21 Alan Modra enable-non-contiguous-regions warnings The warning about discarded sections in elf_link_input_bfd doesn't belong there since the code is dealing with symbols. Multiple symbols in a discarded section will result in multiple identical warnings about the section. Move the warning to a new function in ldlang.c. The patch also tidies the warning quoting of section and file names, consistently using `%pA' and `%pB'. I'm no stickler for one style of section and file name quoting, but they ought to be consistent within a warning, eg. see the first one fixed in ldlang.c, and when a warning is emitted for multiple targets they all ought to use exactly the same format string to reduce translation work. elf64-ppc.c loses the build_one_stub errors since we won't get there before hitting the fatal errors in size_one_stub. bfd/ * elflink.c (elf_link_input_bfd): Don't warn here about discarded sections. * elf32-arm.c (arm_build_one_stub): Use consistent style in --enable-non-contiguous-regions error. * elf32-csky.c (csky_build_one_stub): Likewise. * elf32-hppa.c (hppa_build_one_stub): Likewise. * elf32-m68hc11.c (m68hc11_elf_build_one_stub): Likewise. * elf32-m68hc12.c (m68hc12_elf_build_one_stub): Likewise. * elf32-metag.c (metag_build_one_stub): Likewise. * elf32-nios2.c (nios2_build_one_stub): Likewise. * elfnn-aarch64.c (aarch64_build_one_stub): Likewise. * xcofflink.c (xcoff_build_one_stub): Likewise. * elf64-ppc.c (ppc_size_one_stub): Likewise. (ppc_build_one_stub): Delete dead code. ld/ * ldlang.c (lang_add_section): Use consistent style in --enable-non-contiguous-regions warnings. (size_input_section): Likewise. (warn_non_contiguous_discards): New function. (lang_process): Call it. * testsuite/ld-arm/non-contiguous-arm.d: Update. * testsuite/ld-arm/non-contiguous-arm4.d: Update. * testsuite/ld-arm/non-contiguous-arm7.d: Add --enable-non-contiguous-regions-warnings. * testsuite/ld-arm/non-contiguous-arm7.err: New. * testsuite/ld-powerpc/non-contiguous-powerpc.d: Update. * testsuite/ld-powerpc/non-contiguous-powerpc64.d: Update. 2022-12-21 Alan Modra PR29922, SHT_NOBITS section avoids section size sanity check PR 29922 * dwarf2.c (find_debug_info): Ignore sections without SEC_HAS_CONTENTS. 2022-12-21 Mike Frysinger sim: fully merge sim_cpu_base into sim_cpu Now that all ports have migrated to the new framework, drop support for the old sim_cpu_base layout. There's a lot of noise here, so it's been split into a dedicated commit. sim: enable common sim_cpu usage everywhere All ports should be migrated now. Drop the SIM_HAVE_COMMON_SIM_CPU knob and require it be used everywhere now. sim: or1k: invert sim_cpu storage The cpu.h change is in generated cgen code, but that has been sent upstream too, so the next regen should include it automatically. sim: m32r: invert sim_cpu storage The cpu*.h changes are in generated cgen code, but that has been sent upstream too, so the next regen should include it automatically. sim: lm32: invert sim_cpu storage The cpu.h change is in generated cgen code, but that has been sent upstream too, so the next regen should include it automatically. sim: iq2000: invert sim_cpu storage The cpu.h change is in generated cgen code, but that has been sent upstream too, so the next regen should include it automatically. sim: frv: invert sim_cpu storage The cpu.h change is in generated cgen code, but that has been sent upstream too, so the next regen should include it automatically. sim: cris: invert sim_cpu storage The cpu*.h changes are in generated cgen code, but that has been sent upstream too, so the next regen should include it automatically. sim: bpf: invert sim_cpu storage The cpu.h change is in generated cgen code, but that has been sent upstream too, so the next regen should include it automatically. sim: cgen: prep for inverting sim_cpu storage Some common cgen code changes to allow cgen ports to invert their sim_cpu storage one-by-one. sim: riscv: invert sim_cpu storage sim: pru: invert sim_cpu storage sim: example-synacor: invert sim_cpu storage sim: h8300: invert sim_cpu storage sim: m68hc11: invert sim_cpu storage sim: mips: invert sim_cpu storage sim: v850: invert sim_cpu storage sim: mcore: invert sim_cpu storage sim: aarch64: invert sim_cpu storage sim: microblaze: invert sim_cpu storage sim: avr: invert sim_cpu storage sim: moxie: invert sim_cpu storage sim: msp430: invert sim_cpu storage sim: ft32: invert sim_cpu storage sim: bfin: invert sim_cpu storage 2022-12-21 Mike Frysinger sim: sim_cpu: invert sim_cpu storage Currently all ports have to declare sim_cpu themselves in their sim-main.h and then embed the common sim_cpu_base in it. This dynamic makes it impossible to share common object code among multiple ports because the core data structure is always different. Let's invert this relationship: common code declares sim_cpu, and the port uses the new arch_data field for its per-cpu state. This is the first in a series of changes: it adds a define to select between the old & new layouts, then converts all the ports that don't need custom state over to the new layout. This includes mn10300 that, while it defines custom fields in its cpu struct, never uses them. 2022-12-21 Mike Frysinger sim: move register headers into sim/ namespace [PR sim/29869] These headers define the register numbers for each port to implement the sim_fetch_register & sim_store_register interfaces. While gdb uses these, the APIs are part of the sim, not gdb. Move the headers out of the gdb/ include namespace and into sim/ instead. sim: ppc: drop old dgen.c generator The spreg.[ch] files live in the source tree now and are created with the dgen.py script, so we don't need this old tool anymore. 2022-12-21 Mike Frysinger sim: ppc: move spreg.[ch] files to the source tree Simplify the build by moving the generation of these files from build-time (via dgen.c that we have to compile & execute on the build system) to maintainer/release mode (via spreg-gen.py that we only ever execute when the spreg table actually changes). It speeds up the build process and makes it easier for us to reason about & review changes to the code generator. The tool is renamed from "dgen" because it's hardcoded to only generated spreg files. It isn't a generalized tool for creating lookup tables. 2022-12-21 GDB Administrator Automatic date update in version.in 2022-12-20 Hannes Domani Fix install-strip target The libtool patch broke install-strip of gdb: /bin/sh ../../gdb/../mkinstalldirs /src/gdb/inst/share/gdb/python/gdb transformed_name=`t='s,y,y,'; \ echo gdb | sed -e "$t"` ; \ if test "x$transformed_name" = x; then \ transformed_name=gdb ; \ else \ true ; \ fi ; \ /bin/sh ../../gdb/../mkinstalldirs /src/gdb/inst/bin ; \ /bin/sh ./libtool --mode=install STRIPPROG='strip' /bin/sh /src/gdb/gdb.git/install-sh -c -s \ gdb \ /src/gdb/inst/bin/$transformed_name ; \ /bin/sh ../../gdb/../mkinstalldirs /src/gdb/inst/include/gdb ; \ /usr/bin/install -c -m 644 jit-reader.h /src/gdb/inst/include/gdb/jit-reader.h libtool: install: `/src/gdb/inst/bin/gdb' is not a directory libtool: install: Try `libtool --help --mode=install' for more information. Since INSTALL_PROGRAM_ENV is no longer at the beginning of the command, the gdb executable is not installed with install-strip. 2022-12-20 Torbjörn SVENSSON bfd: Discard symbol regardless of warning flag The discard of symbols should be performed whether the warning for the discard is enabled or not. Without this patch, ld would segfault in bfd_section_removed_from_list, called in the if-statement right after this block, as the argument isec->output_section can be NULL. Co-Authored-By: Yvan ROUX 2022-12-20 Alan Modra PR29915, bfdio.c does not compile with mingw.org's MinGW PR 29915 * configure.ac: Add AC_CHECK_DECLS test ___lc_codepage_func. * configure: Regenerate. * config.in: Regenerate. * bfdio.c (___lc_codepage_func): Move declaration to.. (_bfd_real_fopen): ..here, and use !HAVE_DECL____LC_CODEPAGE_FUNC. Re: x86: remove i386-opc.c Regen opcodes/po/POTFILES.in 2022-12-20 Mike Frysinger sim: ppc: change spreg switch table generation to compile-time Simplify the generator by always outputting the switch tables, and leave the choice of whether to use them to the compiler via a -D flag. 2022-12-20 Mike Frysinger sim: dv-core: add hw_detach_address method [PR sim/25211] The core device has an attach address method as the root of the tree which calls out to the sim API. But it doesn't have a corresponding detach method which means we just crash if anything tries to detach itself from the core. In practice, the m68hc11 is the only model that actually tries to detach itself on the fly, so no one noticed earlier. With this in place, we can delete the existing detach code from the m68hc11 model since it defaults to "passthru" callback which will in turn call the dv-core detach, and they have the same behavior -- call the sim core API to detach from the address space. Bug: https://sourceware.org/PR25211 2022-12-20 Vladimir Mezentsev gprofng: PR29646 Various warnings gprofng/ChangeLog 2022-12-19 Vladimir Mezentsev PR gprofng/29646 * common/core_pcbe.c: Fix missingReturn warning. * libcollector/iolib.c: Fix -Waddress warnings. * src/Settings.cc: Likewise. * src/checks.cc: Likewise. * libcollector/linetrace.c: Likewise. * libcollector/iotrace.c: Fix va_end_missing error. * libcollector/libcol_util.c: Fix uninitvar warning. * src/Command.cc: Fix arrayIndexOutOfBounds error. * src/Function.cc: Fix uninitStructMember warning. * src/ipc.cc: Fix -Wwrite-strings warnings. 2022-12-20 GDB Administrator Automatic date update in version.in 2022-12-19 Tom Tromey Avoid compiler warning in dwarf-do-refresh The Emacs 28 compiler warns about dwarf-mode.el: Warning (comp): dwarf-mode.el:180:32: Warning: Unused lexical argument `ignore' This is easily fixed by prepending "_" to the parameter's name. binutils/ChangeLog 2022-12-19 Tom Tromey * dwarf-mode.el (dwarf-do-refresh): Avoid compiler warning. 2022-12-19 Tom Tromey Use bool in bpstat This changes bpstat to use 'bool' rather than 'char', and updates the uses. Use bool constants for value_print_options This changes the uses of value_print_options to use 'true' and 'false' rather than integers. Remove quick_symbol_functions::relocated quick_symbol_functions::relocated is only needed for psymtabs, and there it is only needed for Rust. However, because we've switched the DWARF reader away from psymtabs, this means there's no longer a need for this method at all. 2022-12-19 Tom Tromey Remove MI version 1 MI version 1 is long since obsolete. Several years ago, I filed PR mi/23170 for this. I think it's finally time to remove this. Any users of MI 1 can and should upgrade to a newer version. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=23170 2022-12-19 Tom Tromey Remove vestiges of MI version 0 I found a few vestiges of MI version 0 in the test suite. This patch removes them. 2022-12-19 Alan Modra Tidy PR29893 and PR29908 fix PR 29893 PR 29908 * dwarf.c (display_debug_addr): Combine dwarf5 unit_length checks. Delete dead code. 2022-12-19 Jan Vrany gdb: fix command lookup in execute_command () Commit b5661ff2 ("gdb: fix possible use-after-free when executing commands") used lookup_cmd_exact () to lookup command again after its execution to avoid possible use-after-free error. However this change broke test gdb.base/define.exp which defines a post-hook for subcommand ("target testsuite"). In this case, lookup_cmd_exact () returned NULL because there's no command 'testsuite' in top-level commands. This commit fixes this case by looking up the command again using the original command line via lookup_cmd (). Approved-By: Simon Marchi 2022-12-19 Nick Clifton Fix potential illegal memory accesses when parsing corrupt DWARF data. PR 29914 * dwarf.c (fetch_indexed_value): Fail if the section is not big enough to contain a header size field. (display_debug_addr): Fail if the computed address size is too big or too small. New Romainian translation for the GOLD subdirectory. 2022-12-19 Jan Beulich gprofng/testsuite: skip Java test without JDK There's no point in even trying the Java test when gprofng was built without Java support, and when the building of the constituents of the testcase also would fail. On such systems this converts the respective tests from "unresolved" to "unsupported", making the overall testsuite run no longer report failure just because of this. gprofng/testsuite: eliminate bogus casts Casting pointers to unsigned int is generally problematic and hence compilers tend to warn about such. While here they're used only in fprintf(), it still seems better to omit such casts, even if only to avoid setting bad precedents. gprofng/testsuite: correct line continuation in endcases.c A backslash used to indicate line continuation (in a macro definition here) is not supposed to be followed by blanks or other white space; the end-of-line indicator is to follow immediately. gprofng/testsuite: correct names for signal handling tests The signal handling tests spend most of their time in the signal handlers, and hence for profile output to match anything in program output, the respective name fields need to hold the handler function names. This converts both respective tests from "unresolved" to actually succeeding. gprofng/testsuite: adjust linking of synprog In order for so_syn.so and so_syx.so to be able to access the main program's "testtime" variable, that variable needs exposing in the dynamic symbol table. Since this is a test program only, do it the brute force way and simply expose all global symbols. Arm: break gas dependency on libopcodes gas doesn't use anything from libopcodes (anymore?) - suppress linking in that library. x86: omit Cpu prefixes from opcode table These enumerators can be used in only one specific field, and hence the Cpu prefix isn't needed ther for disambiguation / name space separation. 2022-12-19 GDB Administrator Automatic date update in version.in 2022-12-18 Alan Modra Comment bfd_get_section_limit_octets and bfd_get_section_alloc_size * bfd.c (bfd_get_section_limit_octets): Add comment. (bfd_get_section_alloc_size): Likewise. * libbfd.c (_bfd_generic_get_section_contents): Use bfd_get_section_limit_octets. * section.c (bfd_get_section_contents): Likewise. * bfd-in2.h: Regenerate. 2022-12-18 Alan Modra ld bootstrap test in build dir with path containing symlinks This allows the bootstrap test to run if you have a symlink somewhere in the build path directory. $ld depends on $base_dir which is set via tcl [pwd], collapsing the symlink like /usr/bin/pwd, while $objdir contains the symlink. * testsuite/ld-bootstrap/bootstrap.exp: Normalize paths when checking for ld build directory. 2022-12-18 Joel Brobecker Update gdb/NEWS after GDB 13 branch creation. This commit a new section for the next release branch, and renames the section of the current branch, now that it has been cut. 2022-12-18 Joel Brobecker Bump version to 14.0.50.DATE-git. Now that the GDB 13 branch has been created, this commit bumps the version number in gdb/version.in to 14.0.50.DATE-git For the record, the GDB 13 branch was created from commit 71c90666e601c511a5f495827ca9ba545e4cb463. Also, as a result of the version bump, the following changes have been made in gdb/testsuite: * gdb.base/default.exp: Change $_gdb_major to 14. 2022-12-18 GDB Administrator Automatic date update in version.in 2022-12-17 Alan Modra bfd_get_relocated_section_contents allow NULL data buffer This patch removes the bfd_malloc in default_indirect_link_order and bfd_simple_get_relocated_section_contents, pushing the allocation down to bfd_get_relocated_section_contents. The idea is to make use of the allocation done with sanity checking in bfd_get_full_section_contents, which is called by bfd_generic_get_relocated_section_contents. Doing this exposed a bug in bfd_get_full_section_contents. With relaxation it is possible that an input section rawsize is different to the section size. In that case we want to use the larger of rawsize (the on-disk size for input sections) and size. * reloc.c (bfd_generic_get_relocated_section_contents), * reloc16.c (bfd_coff_reloc16_get_relocated_section_contents), * coff-alpha.c (alpha_ecoff_get_relocated_section_contents), * coff-sh.c (sh_coff_get_relocated_section_contents), * elf-m10200.c (mn10200_elf_get_relocated_section_contents), * elf-m10300.c (mn10300_elf_get_relocated_section_contents), * elf32-avr.c (elf32_avr_get_relocated_section_contents), * elf32-cr16.c (elf32_cr16_get_relocated_section_contents), * elf32-crx.c (elf32_crx_get_relocated_section_contents), * elf32-h8300.c (elf32_h8_get_relocated_section_contents), * elf32-nds32.c (nds32_elf_get_relocated_section_contents), * elf32-sh.c (sh_elf_get_relocated_section_contents), * elfxx-mips.c (_bfd_elf_mips_get_relocated_section_contents): Handle NULL data buffer. * bfd.c (bfd_get_section_alloc_size): New function. * bfd-in2.h: Regenerate. * compress.c (bfd_get_full_section_contents): Correct section malloc size. * linker.c (default_indirect_link_order): Don't malloc memory here before calling bfd_get_relocated_section_contents. * simple.c (bfd_simple_get_relocated_section_contents): Likewise. 2022-12-17 Alan Modra asan: elf.c:12621:18: applying zero offset to null pointer That's this line in elf_parse_notes: while (p < buf + size) * elf.c (_bfd_elf_make_section_from_shdr): Don't call elf_parse_notes when sh_size is zero. 2022-12-17 Alan Modra Re: The problem with warning in elf_object_p Commit 5aa0f10c424e added a per_xvec_warn array to provide support for warnings from elf_object_p (and a later patch for warnings from pe_bfd_object_p) to be cached and then only printed if the target matches. It was quite limited in the style of message supported, only one message could be printed, and didn't really meet the stated aim of only warning when a target matches: There are many other errors and warnings that can be emitted by functions called from elf_object_p. So this patch extends the error handler functions to support printing to a string buffer, extends per_xvec_warn to support multiple errors/ warnings, and hooks this all into bfd_check_format_matches. If bfd_check_format_matches succeeds then any errors/warnings are printed for the matching target. If bfd_check_format_matches fails either due to no match or to multiple matches and only one target vector produced errors, then those errors are printed. * bfd.c (MAX_ARGS): Define, use throughout. (print_func): New typedef. (_bfd_doprnt): Add new print param. Replace calls to fprintf with print. (PRINT_TYPE): Similarly. (error_handler_fprintf): Renamed from error_handler_internal. Use _bfd_get_error_program_name. Add fprintf arg. Move code setting up args.. (_bfd_doprnt_scan): ..to here. Add ap param. (struct buf_stream): New. (err_sprintf): New function. (error_handler_bfd): New static variable. (error_handler_sprintf): New function. (_bfd_set_error_handler_caching): New function. (_bfd_get_error_program_name): New function. * elfcode.h (elf_swap_shdr_in): Use _bfd_error_handler in warning messages. (elf_object_p): Likewise. * format.c (print_warnmsg): New function. (clear_warnmsg): Rewrite. (null_error_handler): New function. (bfd_check_format_matches): Ignore warnings from recursive calls checking first element of an archive. Use caching error handler otherwise. Print warnings on successful match, or when only one target has emitted warnings/errors. * peicode.h (pe_bfd_object_p): Use _bfd_error_handler in warning messages. * targets.c (per_xvec_warn): Change type of array elements. (struct per_xvec_message): New. (_bfd_per_xvec_warn): Rewrite. * Makefile.am (LIBBFD_H_FILES): Add bfd.c. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. 2022-12-17 Indu Bhagat sframe: doc: update spec for the mangled-RA bit in FRE ChangeLog: * libsframe/doc/sframe-spec.texi 2022-12-17 Indu Bhagat gas: sframe: testsuite: add testcase for .cfi_negate_ra_state Add a new test to check that .cfi_negate_ra_state on aarch64 is handled well (a non-empty SFrame section with valid SFrame FREs is generated). ChangeLog: * testsuite/gas/cfi-sframe/cfi-sframe-aarch64-2.d: New test. * testsuite/gas/cfi-sframe/cfi-sframe-aarch64-2.s: Likewise. * testsuite/gas/cfi-sframe/cfi-sframe.exp: Adjust the list accordingly. 2022-12-17 Indu Bhagat objdump/readelf: sframe: emit marker for FREs with mangled RA In the textual dump of the SFrame section, when an SFrame FRE recovers a mangled RA, use string "[s]" in the output to indicate that the return address is a signed (mangled) one. ChangeLog: * libsframe/sframe-dump.c (dump_sframe_func_with_fres): Postfix with "[s]" if RA is signed with authorization code. 2022-12-17 Indu Bhagat libsframe: provide new access API for mangled RA bit include/ChangeLog: * sframe-api.h (sframe_fre_get_ra_mangled_p): New declaration. ChangeLog: * libsframe/sframe.c (sframe_get_fre_ra_mangled_p): New definition. (sframe_fre_get_ra_mangled_p): New static function. 2022-12-17 Indu Bhagat gas: sframe: add support for .cfi_negate_ra_state DW_CFA_AARCH64_negate_ra_state in aarch64 is multiplexed with DW_CFA_GNU_window_save in the DWARF format. Remove the common-empty-4 testcase because the generated SFrame section will not be be empty anymore. A relevant test will be added in a later commit. ChangeLog: * gas/gen-sframe.c (sframe_v1_set_fre_info): Add new argument for mangled_ra_p. (sframe_set_fre_info): Likewise. (output_sframe_row_entry): Handle mangled_ra_p. (sframe_row_entry_new): Reset mangled_ra_p. (sframe_row_entry_initialize): Initialize mangled_ra_p. (sframe_xlate_do_gnu_window_save): New definition. (sframe_do_cfi_insn): Handle DW_CFA_GNU_window_save. * gas/gen-sframe.h (struct sframe_row_entry): New member. (struct sframe_version_ops): Add a new argument for mangled_ra_p. * gas/testsuite/gas/cfi-sframe/cfi-sframe.exp: Remove test. * gas/testsuite/gas/cfi-sframe/common-empty-4.d: Removed. * gas/testsuite/gas/cfi-sframe/common-empty-4.s: Removed. 2022-12-17 Indu Bhagat sframe.h: add support for .cfi_negate_ra_state Use the last remaining bit in the 'SFrame FRE info' word to store whether the RA is signed/unsigned with PAC authorization code: this bit is named as the "mangled RA" bit. This bit is still unused for x86-64. The behaviour of the mangled-RA info bit in SFrame format closely follows the behaviour of DW_CFA_AARCH64_negate_ra_state in DWARF. During unwinding, whenever an SFrame FRE with non-zero "mangled RA" bit is encountered, it means the upper bits of the return address contain Pointer Authentication code. The unwinder, hence, must use appropriate means to restore LR correctly in such cases. include/ChangeLog: * sframe.h (SFRAME_V1_FRE_INFO_UPDATE_MANGLED_RA_P): New macro. (SFRAME_V1_FRE_MANGLED_RA_P): Likewise. 2022-12-17 GDB Administrator Automatic date update in version.in 2022-12-16 Pedro Alves Delay checking whether /proc/pid/mem is writable (PR gdb/29907) As of 1bcb0708f229 ("gdb/linux-nat: Check whether /proc/pid/mem is writable"), GDB checks if /proc/pid/mem is writable. This is done early at GDB startup, in order to get a consistent warning, instead of a warning that depends on whenever GDB writes to inferior memory. PR gdb/29907 points out that some build systems (like QEMU's, apparently) may call 'gdb --version' to check GDB's presence & its version on the system, and that Gentoo's build process has sandboxing which blocks the /proc/pid/mem access and thus GDB warns, which results in build fails. To help with that, this patch delays the /proc/pid/mem check until we start or attach to an inferior. Ends up potentially emiting a warning close where we already emit other ptrace- and /proc- related warnings, which just Feels Right. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29907 Change-Id: I5537653ecfbbe76a04ab035e40e59d09b4980763 2022-12-16 Nick Clifton Fix previous delta to allow for compilation on 32-bit systems 2022-12-16 Tom de Vries [gdb/testsuite] Fix race in gdb.threads/detach-step-over.exp Once in a while I run into: ... FAIL: gdb.threads/detach-step-over.exp: \ breakpoint-condition-evaluation=host: target-non-stop=off: non-stop=off: \ displaced=off: iter 1: all threads running ... In can easily reproduce this by doing: ... # Wait a bit, to give time for the threads to hit the # breakpoint. - sleep 1 return true ... Fix this by counting the running threads in a loop, effectively allowing 10 seconds (instead of 1) for the threads to start running, but only sleeping if needed. Reduces total execution time from 1m27s to 56s. Tested on x86_64-linux. 2022-12-16 Andrew Burgess gdb: fix crash when getting the value of a label symbol When the source program contains a goto label, it turns out it's actually pretty hard for a user to find out more about that label. For example: (gdb) p some_label No symbol "some_label" in current context. (gdb) disassemble some_label No symbol "some_label" in current context. (gdb) x/10i some_label No symbol "some_label" in current context. (gdb) break some_label Breakpoint 2 at 0x401135: file /tmp/py-label-symbol-value.c, line 35. In all cases, some_label is a goto label within the current frame. Only placing a breakpoint on the label worked. This all seems a little strange to me, it feels like asking about a goto label would not be an unreasonable thing for a user to do. This commit doesn't fix any of the above issues, I mention them just to provide a little context for why the following issue has probably not been seen before. It turns out there is one way a user can access the symbol for a goto label, through the Python API: python frame = gdb.selected_frame() python frame_pc = frame.pc() python block = gdb.current_progspace().block_for_pc(frame_pc) python symbol,_ = gdb.lookup_symbol('some_label', block, gdb.SYMBOL_LABEL_DOMAIN) python print(str(symbol.value())) ../../src/gdb/findvar.c:204: internal-error: store_typed_address: Assertion `type->is_pointer_or_reference ()' failed. The problem is that label symbols are created using the builtin_core_addr type, which is a pure integer type. When GDB tries to fetch the value of a label symbol then we end up in findvar.c, in the function language_defn::read_var_value, in the LOC_LABEL case. From here store_typed_address is called to store the address of the label into a value object with builtin_core_addr type. The problem is that store_typed_address requires that the destination type be a pointer or reference, which the builtin_core_addr type is not. Now it's not clear what type a goto label address should have, but GCC has an extension that allows users to take the address of a goto label (using &&), in that case the result is of type 'void *'. I propose that when we convert the CORE_ADDR value to a GDB value object, we use builtin_func_ptr type instead of builtin_core_addr, this means the result will be of type 'void (*) ()'. The benefit of this approach is that when gdbarch_address_to_pointer is called the target type will be correctly identified as a pointer to code, which should mean any architecture specific adjustments are done correctly. We can then cast the new value to 'void *' type with a call to value_cast_pointer, this should not change the values bit representation, but will just update the type. After this asking for the value of a label symbol works just fine: (gdb) python print(str(symbol.value())) 0x401135 And the type is maybe what we'd expect: (gdb) python print(str(symbol.value().type)) void * 2022-12-16 Simon Marchi gdb: convert linux-osdata.c from buffer to std::string Replace the use of struct buffer in linux-osdata.c with std::string. There is no change in the logic, so there should be no user-visible change. Change-Id: I27f53165d401650bbd0bebe8ed88221e25545b3f Approved-By: Pedro Alves 2022-12-16 Simon Marchi gdbsupport: add string_xml_appendf Add a version of buffer_xml_printf (defined in gdbsupport/buffer.{c,h}) that appends to an std::string, rather than a struct buffer. Call it "string" rather than "buffer" since it operates on an std::string rather than a buffer. And call it "appendf" rather than "printf", since it appends to and does not replace the string's content. This mirrors string_appendf. Place the new version in gdbsupport/xml-utils.h. The code is a direct copy of buffer_xml_printf. The old version is going to disappear at some point, which is why I didn't do any effort to share code. Change-Id: I30e030627ab4970fd0b9eba3b7e8cec78fa561ba Approved-By: Pedro Alves 2022-12-16 Andrew Burgess gdb: clean up some inefficient std::string usage This commit: commit 53cf95c3389a3ecd97276d322e4a60fe3396a201 Date: Wed Dec 14 14:17:44 2022 +0000 gdb: make more use of make_target_connection_string Introduced a couple of inefficient uses of std::string, both of which are fixed in this commit. There should be no user visible changes after this commit. Approved-By: Simon Marchi 2022-12-16 Nick Clifton Fix a potential illegal memory access when parsing corrupt DWARF information. PR 29908 * dwarf.c (display_debug_addr): Check for corrupt header lengths. 2022-12-16 Jan Vrany gdb/testsuite: add test for Python commands redefining itself This commit adds a test that creates a Python command that redefines itself during its execution. This is to test use-after-free in execute_command (). This test needs run with ASan enabled in order to fail when it should. Approved-By: Simon Marchi 2022-12-16 Luis Machado [aarch64] Fix removal of non-address bits for PAuth PR gdb/28947 The address_significant gdbarch setting was introduced as a way to remove non-address bits from pointers, and it is specified by a constant. This constant represents the number of address bits in a pointer. Right now AArch64 is the only architecture that uses it, and 56 was a correct option so far. But if we are using Pointer Authentication (PAuth), we might use up to 2 bytes from the address space to store the required information. We could also have cases where we're using both PAuth and MTE. We could adjust the constant to 48 to cover those cases, but this doesn't cover the case where GDB needs to sign-extend kernel addresses after removal of the non-address bits. This has worked so far because bit 55 is used to select between kernel-space and user-space addresses. But trying to clear a range of bits crossing the bit 55 boundary requires the hook to be smarter. The following patch renames the gdbarch hook from significant_addr_bit to remove_non_address_bits and passes a pointer as opposed to the number of bits. The hook is now responsible for removing the required non-address bits and sign-extending the address if needed. While at it, make GDB and GDBServer share some more code for aarch64 and add a new arch-specific testcase gdb.arch/aarch64-non-address-bits.exp. Bug-url: https://sourceware.org/bugzilla/show_bug.cgi?id=28947 Approved-By: Simon Marchi 2022-12-16 Jan Beulich gas: restore Dwarf info generation after macro diagnostic adjustments While 6fdb723799e2 ("gas: re-work line number tracking for macros and their expansions") was meant to leave generated Dwarf as is, it really didn't (and the testcase intended to catch that wasn't covering the case which broke). Its adjustment to buffer_and_nest() didn't go far enough, leading to the "linefile" directive inserted at the top to also be processed later in the PR gas/16908 workaround (which clearly isn't intended - it's being put there for processing during macro expansion only). That unnoticed flaw in turn led me to work around it by a (suspicious to me already at the time) conditional in as_where(). x86: change representation of extension opcode Having a "None" field in the vast majority of entries is needlessly cluttering the overall table. Instead of this being a separate field, use a representation matching that of Intel SDM and AMD PM for the main use of the field: Append the value after a / as the separator. 2022-12-16 Simon Marchi gdbsupport: change xml_escape_text_append's parameter from pointer to reference The passed in string can't be nullptr, it makes more sense to pass in a reference. Change-Id: Idc8bd38abe1d6d9b44aa227d7856956848c233b3 2022-12-16 Simon Marchi gdb: remove static buffer in command_line_input [I sent this earlier today, but I don't see it in the archives. Resending it through a different computer / SMTP.] The use of the static buffer in command_line_input is becoming problematic, as explained here [1]. In short, with this patch [2] that attempt to fix a post-hook bug, when running gdb.base/commands.exp, we hit a case where we read a "define" command line from a script file using command_command_line_input. The command line is stored in command_line_input's static buffer. Inside the define command's execution, we read the lines inside the define using command_line_input, which overwrites the define command, in command_line_input's static buffer. After the execution of the define command, execute_command does a command look up to see if a post-hook is registered. For that, it uses a now stale pointer that used to point to the define command, in the static buffer, causing a use-after-free. Note that the pointer in execute_command points to the dynamically-allocated buffer help by the static buffer in command_line_input, not to the static object itself, hence why we see a use-after-free. Fix that by removing the static buffer. I initially changed command_line_input and other related functions to return an std::string, which is the obvious but naive solution. The thing is that some callees don't need to return an allocated string, so this this an unnecessary pessimization. I changed it to passing in a reference to an std::string buffer, which the callee can use if it needs to return dynamically-allocated content. It fills the buffer and returns a pointers to the C string inside. The callees that don't need to return dynamically-allocated content simply don't use it. So, it started with modifying command_line_input as described above, all the other changes derive directly from that. One slightly shady thing is in handle_line_of_input, where we now pass a pointer to an std::string's internal buffer to readline's history_value function, which takes a `char *`. I'm pretty sure that this function does not modify the input string, because I was able to change it (with enough massaging) to take a `const char *`. A subtle change is that we now clear a UI's line buffer using a SCOPE_EXIT in command_line_handler, after executing the command. This was previously done by this line in handle_line_of_input: /* We have a complete command line now. Prepare for the next command, but leave ownership of memory to the buffer . */ cmd_line_buffer->used_size = 0; I think the new way is clearer. [1] https://inbox.sourceware.org/gdb-patches/becb8438-81ef-8ad8-cc42-fcbfaea8cddd@simark.ca/ [2] https://inbox.sourceware.org/gdb-patches/20221213112241.621889-1-jan.vrany@labware.com/ Change-Id: I8fc89b1c69870c7fc7ad9c1705724bd493596300 Reviewed-By: Tom Tromey 2022-12-16 GDB Administrator Automatic date update in version.in 2022-12-15 Indu Bhagat libsframe asan: avoid generating misaligned loads There are two places where unaligned loads were seen on aarch64: - #1. access to the SFrame FRE stack offsets in the in-memory representation/abstraction provided by libsframe. - #2. access to the SFrame FRE start address in the on-disk representation of the frame row entry. For #1, we can fix this by reordering the struct members of sframe_frame_row_entry in libsframe/sframe-api.h. For #2, we need to default to using memcpy instead, and copy out the bytes to a location for output. SFrame format is an unaligned on-disk format. As such, there are other blobs of memory in the on-disk SFrame FRE that are on not on their natural boundaries. But that does not pose further problems yet, because the users are provided access to the on-disk SFrame FRE data via libsframe's sframe_frame_row_entry, the latter has its' struct members aligned on their respective natural boundaries (and initialized using memcpy). PR 29856 libsframe asan: load misaligned at sframe.c:516 ChangeLog: PR libsframe/29856 * bfd/elf64-x86-64.c: Adjust as the struct members have been reordered. * libsframe/sframe.c (sframe_decode_fre_start_address): Use memcpy to perform 16-bit/32-bit reads. * libsframe/testsuite/libsframe.encode/encode-1.c: Adjust as the struct members have been reordered. include/ChangeLog: PR libsframe/29856 * sframe-api.h: Reorder fre_offsets for natural alignment. 2022-12-15 Simon Marchi gdb/testsuite: don't delete command files in gdb.base/commands.exp Don't delete the runtime-generated command files. This makes it easier to reproduce tests by hand. Change-Id: I4e53484eea216512f1c5d7dfcb5c464b36950946 Approved-By: Tom Tromey 2022-12-15 Tom Tromey Move streq and compare_cstrings to gdbsupport It seems to me that streq and compare_cstrings belong near the other string utility functions in common-utils.h; and furthermore that streq ought to be inlined. This patch makes this change. Approved-By: Simon Marchi 2022-12-15 Tom Tromey Remove subset_compare I stumbled across subset_compare today, and after looking at the callers I realized it could be removed and replaced with calls to startswith. Approved-By: Simon Marchi 2022-12-15 Andrew Burgess gdb: use gdb_assert not internal_error Spotted a couple of places in findvar.c where we use: if ( ! CONDITION ) internal_error ("..."); this commit changes these to be: gdb_assert ( CONDITION ); which I think is better. Unless we happen to hit the internal_error calls (which was bad) there should be no user visible changes after this commit. 2022-12-15 Andrew Burgess gdb: some int to bool conversion in remote-sim.c Some obvious int to bool conversion in remote-sim.c, there should be no user visible changes after this commit. 2022-12-15 Andrew Burgess gdb: make more use of make_target_connection_string I noticed that we have a function make_target_connection_string which wraps all the logic for creating a string that describes a target connection - but in some places we are not calling this function, instead we duplicate the function's logic. This commit cleans this up, and calls make_target_connection_string where possible. There should be no user visible changes after this commit. 2022-12-15 Andrew Burgess gdb: int to bool conversion in tracefile.c Some obvious int to bool conversion in tracefile.c. Should be no user visible changes after this commit. 2022-12-15 Tom de Vries [gdb/testsuite] Fix gdb.base/condbreak-multi-context.exp with gcc 4.8.5 With gcc 4.8.5, I run into: ... Running gdb.base/condbreak-multi-context.exp ... gdb compile failed, condbreak-multi-context.cc:21:11: warning: non-static \ data member initializers only available with -std=c++11 or -std=gnu++11 \ [enabled by default] int b = 20; ^ ... Fix this by making it a static const. Tested on x86_64-linux, with gcc 4.8.5, 7.5.0 and clang 13.0.1. 2022-12-15 GDB Administrator Automatic date update in version.in 2022-12-14 Andrew Burgess gdb/maint: add core file name to 'maint info program-spaces' output Each program space can have an associated core file. Include this information in the output of 'maint info program-spaces'. 2022-12-14 Andrew Burgess gdb: ensure all targets are popped before an inferior is destructed Now that the inferiors target_stack automatically manages target reference counts, we might think that we don't need to unpush targets when an inferior is deleted... ...unfortunately that is not the case. The inferior::unpush function can do some work depending on the type of target, so it is important that we still pass through this function. To ensure that this is the case, in this commit I've added an assert to inferior::~inferior that ensures the inferior's target_stack is empty (except for the ever present dummy_target). I've then added a pop_all_targets call to delete_inferior, otherwise the new assert will fire in, e.g. the gdb.python/py-inferior.exp test. 2022-12-14 Andrew Burgess gdb: remove the pop_all_targets (and friends) global functions This commit removes the global functions pop_all_targets, pop_all_targets_above, and pop_all_targets_at_and_above, and makes them methods on the inferior class. As the pop_all_targets functions will unpush each target, which decrements the targets reference count, it is possible that the target might be closed. Right now, closing a target, in some cases, depends on the current inferior being set correctly, that is, to the inferior from which the target was popped. To facilitate this I have used switch_to_inferior_no_thread within the new methods. Previously it was the responsibility of the caller to ensure that the correct inferior was selected. In a couple of places (event-top.c and top.c) I have been able to remove a previous switch_to_inferior_no_thread call. In remote_unpush_target (remote.c) I have left the switch_to_inferior_no_thread call as it is required for the generic_mourn_inferior call. 2022-12-14 Andrew Burgess gdb: remove decref_target The decref_target function is not really needed. Calling target_ops::decref will just redirect to decref_target anyway, so why not just rename decref_target to target_ops::decref? That's what this commit does. It's not exactly renaming to target_ops::decref, because the decref functionality is handled by a policy class, so the new name is now target_ops_ref_policy::decref. There should be no user visible change after this commit. 2022-12-14 Andrew Burgess gdb: have target_stack automate reference count handling This commit changes the target_stack class from using a C style array of 'target_ops *' to using a C++ std::array. The benefit of this change is that some of the reference counting of target_ops objects is now done automatically. This commit fixes a crash in gdb.python/py-inferior.exp where GDB crashes at exit, leaving a core file behind. The crash occurs in connpy_connection_dealloc, and is actually triggered by this assert: gdb_assert (conn_obj->target == nullptr); Now a little aside... ... the assert is never actually printed, instead GDB crashes due to calling a pure virtual function. The backtrace at the point of crash looks like this: #7 0x00007fef7e2cf747 in std::terminate() () from /lib64/libstdc++.so.6 #8 0x00007fef7e2d0515 in __cxa_pure_virtual () from /lib64/libstdc++.so.6 #9 0x0000000000de334d in target_stack::find_beneath (this=0x4934d78, t=0x2bda270 ) at ../../s> #10 0x0000000000df4380 in inferior::find_target_beneath (this=0x4934b50, t=0x2bda270 ) at ../.> #11 0x0000000000de2381 in target_ops::beneath (this=0x2bda270 ) at ../../src/gdb/target.c:3047 #12 0x0000000000de68aa in target_ops::supports_terminal_ours (this=0x2bda270 ) at ../../src/gd> #13 0x0000000000dde6b9 in target_supports_terminal_ours () at ../../src/gdb/target.c:1112 #14 0x0000000000ee55f1 in internal_vproblem(internal_problem *, const char *, int, const char *, typedef __va_li> Notice in frame #12 we called target_ops::supports_terminal_ours, however, this is the_dummy_target, which is of type dummy_target, and so we should have called dummy_target::supports_terminal_ours. I believe the reason we ended up in the wrong implementation of supports_terminal_ours (which is a virtual function) is because we made the call during GDB's shut-down, and, I suspect, the vtables were in a weird state. Anyway, the point of this patch is not to fix GDB's ability to print an assert during exit, but to address the root cause of the assert. With that aside out of the way, we can return to the main story... Connections are represented in Python with gdb.TargetConnection objects (or its sub-classes). The assert in question confirms that when a gdb.TargetConnection is deallocated, the underlying GDB connection has itself been removed from GDB. If this is not true then we risk creating multiple different gdb.TargetConnection objects for the same connection, which would be bad. To ensure that we have one gdb.TargetConnection object for each connection, the all_connection_objects map exists, this maps the process_stratum_target object (the connection) to the gdb.TargetConnection object that represents the connection. When a connection is removed in GDB the connection_removed observer fires, which we catch with connpy_connection_removed, this function then sets conn_obj->target to nullptr, and removes the corresponding entry from the all_connection_objects map. The first issue here is that connpy_connection_dealloc is being called as part of GDB's exit code, which is run after the Python interpreter has been shut down. The connpy_connection_dealloc function is used to deallocate the gdb.TargetConnection Python object. Surely it is wrong for us to be deallocating Python objects after the interpreter has been shut down. The reason why connpy_connection_dealloc is called during GDB's exit is that the global all_connection_objects map is still holding a reference to the gdb.TargetConnection object. When the map is destroyed during GDB's exit, the gdb.TargetConnection objects within the map can finally be deallocated. The reason why all_connection_objects has contents when GDB exits, and the reason the assert fires, is that, when GDB exits, there are still some connections that have not yet been removed from GDB, that is, they have a non-zero reference count. If we take a look at quit_force (top.c) you can see that, for each inferior, we call pop_all_targets before we (later in the function) call do_final_cleanups. It is the do_final_cleanups call that is responsible for shutting down the Python interpreter. The pop_all_targets calls should, in theory, cause all the connections to be removed from GDB. That this isn't working indicates that some targets have a non-zero reference count even after this final pop_all_targets call, and indeed, when I debug GDB, that is what I see. I tracked the problem down to delete_inferior where we do some house keeping, and then delete the inferior object, which calls inferior::~inferior. In neither delete_inferior or inferior::~inferior do we call pop_all_targets, and it is this missing call that means we leak some references to the target_ops objects on the inferior's target_stack. In this commit I will provide a partial fix for the problem. I say partial fix, but this will actually be enough to resolve the crash. In a later commit I will provide the final part of the fix. As mentioned at the start of the commit message, this commit changes the m_stack in target_stack to hold target_ops_ref objects. This means that when inferior::~inferior is called, and m_stack is released, we automatically decrement the target_ops reference count. With this change in place we no longer leak any references, and now, in quit_force the final pop_all_targets calls will release the final references. This means that the targets will be correctly closed at this point, which means the connections will be removed from GDB and the Python objects deallocated before the Python interpreter shuts down. There's a slight oddity in target_stack::unpush, where we std::move the reference out of m_stack like this: auto ref = std::move (m_stack[stratum]); the `ref' isn't used explicitly, but it serves to hold the target_ops_ref until the end of the scope while allowing the m_stack entry to be reset back to nullptr. The alternative would be to directly set the m_stack entry to nullptr, like this: m_stack[stratum] = nullptr; The problem here is that when we set the m_stack entry to nullptr we first decrement the target_ops reference count, and then set the array entry to nullptr. If the decrement means that the target_ops object reaches a zero reference count then the target_ops object will be closed by calling target_close. In target_close we ensure that the target being closed is not in any inferiors target_stack. As we decrement before clearing, then this check in target_close will fail, and an assert will trigger. By using std::move to move the reference out of m_stack, this clears the m_stack entry, meaning the inferior no longer contains the target_ops in its target_stack. Now when the REF object goes out of scope and the reference count is decremented, target_close can run successfully. I've made use of the Python connection_removed listener API to add a test for this issue. The test installs a listener and then causes delete_inferior to be called, we can then see that the connection is then correctly removed (because the listener triggers). 2022-12-14 Andrew Burgess gdb/remote: remove some manual reference count handling While working on some other target_ops reference count related code, I spotted that in remote.c we do some manual reference count handling, i.e. we call target_ops::incref and decref_target (which wraps target_ops::decref). I think it would be better to make use of gdb::ref_ptr to automate the reference count management. So, this commit updates scoped_mark_target_starting in two ways, first, I use gdb::ref_ptr to handle the reference counts. Then, instead of using the scoped_mark_target_starting constructor and destructor to set and reset the starting_up flag, I now use a scoped_restore_tmpl object to set and restore the flag. The above changes mean that the scoped_mark_target_starting destructor can be completely removed, and the constructor body is now empty. I've also fixed a typo in the class comment. The only change in behaviour after this commit is that previously we didn't care what the value of starting_up was, we just set it to true in the constructor and false in the destructor. Now, I assert that the flag is initially false, then set the flag true when the scoped_mark_target_starting is created. As the starting_up flag is initialized to false then, for the assert to fire, we would need to recursively enter remote_target::start_remote_1, which I don't think is something we should be doing, so I think the new assert is an improvement. 2022-12-14 Alan Modra Re: ld, gold: remove support for -z bndplt (MPX prefix) Don't attempt to run gold tests with -z bndplt * testsuite/Makefile.am (exception_x86_64_bnd_test, bnd_plt_1.sh), (bnd_ifunc_1.sh, bnd_ifunc_2.sh): Delete rules. * testsuite/Makefile.in: Regenerate. * testsuite/bnd_ifunc_1.s: Delete. * testsuite/bnd_ifunc_1.sh: Delete. * testsuite/bnd_ifunc_2.s: Delete. * testsuite/bnd_ifunc_2.sh: Delete. * testsuite/bnd_plt_1.s: Delete. * testsuite/bnd_plt_1.sh: Delete. 2022-12-14 Alan Modra asan: buffer overflow in sh_reloc * coff-sh.c (sh_reloc): Use bfd_reloc_offset_in_range. 2022-12-14 Alan Modra Fix haiku ld dependencies I noticed after commit 8ad93045ed, "ld, gold: remove support for -z bndplt (MPX prefix)", that some of my builds were failing with eelf_x86_64_haiku.c:650:9: error: no member named 'bndplt' in 'struct elf_linker_x86_params' params.bndplt = true; ~~~~~~ ^ * emulparams/aarch64haiku.sh: Use "source_sh" rather than ".". * emulparams/armelf_haiku.sh: Likewise. * emulparams/elf32ppchaiku.sh: Likewise. * emulparams/elf_mipsel_haiku.sh: Likewise. * emulparams/elf_x86_64_haiku.sh: Likewise. 2022-12-14 Andrew Burgess gdb: add SYMBOL_LOOKUP_SCOPED_DEBUG_ENTER_EXIT After the previous commit converted symbol-lookup debug to use the new debug scheme, this commit adds SYMBOL_LOOKUP_SCOPED_DEBUG_ENTER_EXIT. The previous commit didn't add SYMBOL_LOOKUP_SCOPED_DEBUG_ENTER_EXIT because symbol-lookup debug is controlled by an 'unsigned int' rather than a 'bool' control variable, we use the numeric value to offer different levels of verbosity for symbol-lookup debug. The *_SCOPED_DEBUG_ENTER_EXIT mechanism currently relies on capturing a reference to the bool control variable, and evaluating the variable both on entry, and at exit, this is done in the scoped_debug_start_end class (see gdbsupport/common-debug.h). This commit templates scoped_debug_start_end so that the class can accept either a 'bool &' or an invokable object, e.g. a lambda function, or a function pointer. The existing scoped_debug_start_end and scoped_debug_enter_exit macros in common-debug.h are updated to support scoped_debug_enter_exit being templated, however, nothing outside of common-debug.h needs to change. I've then added SYMBOL_LOOKUP_SCOPED_DEBUG_ENTER_EXIT in symtab.h, and added a couple of token uses in symtab.c. I didn't want to add too much in this first commit, this is really about updating common-debug.h to support this new functionality. Within symtab.h I created a couple of global functions that can be used to query the status of the symbol_lookup_debug control variable, these functions are then used within the two existing macros: symbol_lookup_debug_printf symbol_lookup_debug_printf_v and also in the new SYMBOL_LOOKUP_SCOPED_DEBUG_ENTER_EXIT macro. 2022-12-14 Andrew Burgess gdb: convert 'set debug symbol-lookup' to new debug printing scheme Convert the implementation of 'set debug symbol-lookup' to the new debug printing scheme. In a few places I've updated the debug output to remove places where the printed debug message included the function name, the new debug scheme already adds that, but I haven't done all the possible updates. 2022-12-14 Andrew Burgess gdb/testsuite: new test for recent dwarf reader issue This commit provides a test for this commit: commit 55fc1623f942fba10362cb199f9356d75ca5835b Date: Thu Nov 3 13:49:17 2022 -0600 Add name canonicalization for C Which resolves PR gdb/29105. My reason for writing this test was a desire to better understand the above commit, my process was to study the commit until I thought I understood it, then write a test to expose the issue. As the original commit didn't have a test, I thought it wouldn't hurt to commit this upstream. The problem tested for here is already described in the above commit, but I'll give a brief description here. This description describes GDB prior to the above commit: - Builtin types are added to GDB using their canonical name, e.g. "short", not "signed short", - When the user does something like 'p sizeof(short)', then this is handled in c-exp.y, and results in a call to lookup_signed_type for the name "int". The "int" here is actually being looked up as the type for the result of the 'sizeof' expression, - In lookup_signed_type GDB first adds a 'signed' and looks for that type, so in this case 'signed int', and, if that lookup fails, GDB then looks up 'int', - The problem is that 'signed int' is not the canonical name for a signed int, so no builtin type with that name will be found, GDB will then go to each object file in turn looking for a matching type, - When checking each object file, GDB will first check the partial symtab to see if the full symtab should be expanded or not. Remember, at this point GDB is looking for 'signed int', there will be no partial symbols with that name, so GDB will not expand anything, - However, GDB checks each partial symbol using multiple languages, not just the current language (C in this case), so, when GDB checks using the C++ language, the symbol name is first canonicalized (the code that does this can be found lookup_name_info::language_lookup_name). As the canonical form of 'signed int' is just 'int', GDB then looks for any symbols with the name 'int', most partial symtabs will contain such a symbol, so GDB ends up expanding pretty much every symtab. The above commit fixes this by avoiding the use of non-canonical names with C, now the initial builtin type lookup will succeed, and GDB never even considers whether to expand any additional symtabs. The test case creates a library that includes char, short, int, and long types, and a test program that links against the library. In the test script we start the inferior, but don't allow it to progress far enough that the debug information for the library has been fully expanded yet. Then we evaluate some 'sizeof(TYPE)' expressions. In the buggy version of GDB this would cause the debug information for the library to be fully expanded, while in the fixed version of GDB this will not be the case. We use 'info sources' to determine if the debug information has been fully expanded or not. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29105 2022-12-14 Andrew Burgess gdb/testsuite: fix readnow detection The following commit broke the readnow detection in the testsuite: commit dfaa040b440084dd73ebd359326752d5f44fc02c Date: Mon Mar 29 18:31:31 2021 -0600 Remove some "OBJF_READNOW" code from dwarf2_debug_names_index The testsuite checks if GDB was started with the -readnow flag by using the 'maintenance print objfiles' command, and looking for the string 'faked for "readnow"' in the output. This is implemented in two helper procs `readnow` (gdb.exp) and `mi_readnow` (mi-support.exp). The following tests all currently depend on this detection: gdb.base/maint.exp gdb.cp/nsalias.exp gdb.dwarf2/debug-aranges-duplicate-offset-warning.exp gdb.dwarf2/dw2-stack-boundary.exp gdb.dwarf2/dw2-zero-range.exp gdb.dwarf2/gdb-index-nodebug.exp gdb.mi/mi-info-sources.exp gdb.python/py-symbol.exp gdb.rust/traits.exp The following test also includes detection of 'readnow', but does the detection itself by checking $::GDBFLAGS for the readnow flag: gdb.opt/break-on-_exit.exp The above commit removed from GDB the code that produced the 'faked for "readnow"' string, as a consequence the testsuite can no longer correctly spot when readnow is in use, and many of the above tests will fail (at least partially). When looking at the above tests, I noticed that gdb.rust/traits.exp does call `readnow`, but doesn't actually use the result, so I've removed the readnow call, this simplifies the next part of this patch as gdb.rust/traits.exp was the only place an extra regexp was passed to the readnow call. Next I have rewritten `readnow` to check the $GDBFLAGS for the -readnow flag, and removed the `maintenance print objfiles` check. At least for all the tests above, when using the readnow board, this is good enough to get everything passing again. For the `mi_readnow` proc, I changed this to just call `readnow` from gdb.exp, I left the mi_readnow name in place - in the future it might be the case that we want to do some different checks here. Finally, I updated gdb.opt/break-on-_exit.exp to call the `readnow` proc. With these changes, all of the tests listed above now pass correctly when using the readnow board. 2022-12-14 Li Xu RISC-V: Add string length check for operands in AS The current AS accepts invalid operands due to miss of operands length check. For example, "e6" is an invalid operand in (vsetvli a0, a1, e6, mf8, tu, ma), but it's still accepted by assembler. In detail, the condition check "strncmp (array[i], *s, len) == 0" in arg_lookup function passes with "strncmp ("e64", "e6", 2)" in the case above. So the generated encoding is same as that of (vsetvli a0, a1, e64, mf8, tu, ma). This patch fixes issue above by prompting an error in such case and also adds a new testcase. gas/ChangeLog: * config/tc-riscv.c (arg_lookup): Add string length check for operands. * testsuite/gas/riscv/vector-insns-fail-vsew.d: New testcase for an illegal vsew. * testsuite/gas/riscv/vector-insns-fail-vsew.l: Likewise. * testsuite/gas/riscv/vector-insns-fail-vsew.s: Likewise. 2022-12-14 Jan Beulich x86: adjust type checking constructs As Alan points out, ASAN takes issue with these constructs, for current_templates being NULL. Wrap them in sizeof(), so the expressions aren't actually evaluated. 2022-12-14 Martin Liska ld, gold: remove support for -z bndplt (MPX prefix) bfd/ChangeLog: * elf-linker-x86.h (struct elf_linker_x86_params): Remove bndplt. * elf64-x86-64.c (elf_x86_64_scan_relocs): Ignore R_X86_64_PLT32_BND. (elf_x86_64_relocate_section): Similarly here. (elf_x86_64_link_setup_gnu_properties): Ignore bndplt. * elfxx-x86.c: Likewise. * elfxx-x86.h: Likewise. gold/ChangeLog: * NEWS: Document -z bndplt. * options.h (class General_options): Remove bndplt option. * x86_64.cc (class Output_data_plt_x86_64_bnd): Remove. (Target_x86_64::do_make_data_plt): Do not use Output_data_plt_x86_64_bnd. (Target_x86_64::Scan::get_reference_flags): Likewise. (Target_x86_64::Scan::check_non_pic): Likewise. (Target_x86_64::Scan::local): Likewise. (Target_x86_64::Scan::global): Likewise. ld/ChangeLog: * NEWS: Document -z bndplt. * emulparams/elf_x86_64.sh: Remove bndplt option. * ld.texi: Likewise. * testsuite/ld-x86-64/x86-64.exp: * testsuite/ld-x86-64/bnd-branch-1-now.d: Removed. * testsuite/ld-x86-64/bnd-branch-1.d: Removed. * testsuite/ld-x86-64/bnd-branch-1.s: Removed. * testsuite/ld-x86-64/bnd-ifunc-1-now.d: Removed. * testsuite/ld-x86-64/bnd-ifunc-1.d: Removed. * testsuite/ld-x86-64/bnd-ifunc-1.s: Removed. * testsuite/ld-x86-64/bnd-ifunc-2-now.d: Removed. * testsuite/ld-x86-64/bnd-ifunc-2.d: Removed. * testsuite/ld-x86-64/bnd-ifunc-2.s: Removed. * testsuite/ld-x86-64/bnd-plt-1-now.d: Removed. * testsuite/ld-x86-64/bnd-plt-1.d: Removed. * testsuite/ld-x86-64/mpx.exp: Removed. * testsuite/ld-x86-64/mpx1.out: Removed. * testsuite/ld-x86-64/mpx1a.c: Removed. * testsuite/ld-x86-64/mpx1a.rd: Removed. * testsuite/ld-x86-64/mpx1b.c: Removed. * testsuite/ld-x86-64/mpx1c.c: Removed. * testsuite/ld-x86-64/mpx1c.rd: Removed. * testsuite/ld-x86-64/mpx2.out: Removed. * testsuite/ld-x86-64/mpx2a.c: Removed. * testsuite/ld-x86-64/mpx2a.rd: Removed. * testsuite/ld-x86-64/mpx2b.c: Removed. * testsuite/ld-x86-64/mpx2c.c: Removed. * testsuite/ld-x86-64/mpx2c.rd: Removed. * testsuite/ld-x86-64/mpx3.dd: Removed. * testsuite/ld-x86-64/mpx3a.s: Removed. * testsuite/ld-x86-64/mpx3b.s: Removed. * testsuite/ld-x86-64/mpx3n.dd: Removed. * testsuite/ld-x86-64/mpx4.dd: Removed. * testsuite/ld-x86-64/mpx4a.s: Removed. * testsuite/ld-x86-64/mpx4b.s: Removed. * testsuite/ld-x86-64/mpx4n.dd: Removed. * testsuite/ld-x86-64/pr20800a.S: Removed. * testsuite/ld-x86-64/pr20800b.S: Removed. * testsuite/ld-x86-64/pr21038a-now.d: Removed. * testsuite/ld-x86-64/pr21038a.d: Removed. * testsuite/ld-x86-64/pr21038a.s: Removed. * testsuite/ld-x86-64/pr21038b-now.d: Removed. * testsuite/ld-x86-64/pr21038b.d: Removed. * testsuite/ld-x86-64/pr21038b.s: Removed. * testsuite/ld-x86-64/pr21038c-now.d: Removed. * testsuite/ld-x86-64/pr21038c.d: Removed. * testsuite/ld-x86-64/pr21038c.s: Removed. 2022-12-14 Alan Modra asan: signed integer overflow in display_debug_frames * dwarf.c (struct Frame_Chunk): Make col_offset an int64_t. Adjust all places allocating col_offset and col_type to use the size of the array element rather than the size of a type. (frame_display_row): Adjust printing of col_offset. (display_debug_frames): Factor out multiplication by code_factor and data_factor. Avoid signed overflow. Use 64-bit variables. 2022-12-14 Alan Modra Don't access freed memory printing objcopy warning abfd->filename will be freed if bfd_close gets far enough to delete the bfd. It's possible to have an error from fclose at this point. * objcopy.c (copy_archive): Dup filename before closing bfd for potential use in bfd_nonfatal_message. 2022-12-14 GDB Administrator Automatic date update in version.in 2022-12-13 Tom Tromey Fix control-c handling on Windows As Hannes pointed out, the Windows target-async patches broke C-c handling there. Looking into this, I found a few oddities, fixed here. First, windows_nat_target::interrupt calls GenerateConsoleCtrlEvent. I think this event can be ignored by the inferior, so it's not a great way to interrupt. Instead, using DebugBreakProcess (or a more complicated thing for Wow64) seems better. Second, windows_nat_target did not implement the pass_ctrlc method. Implementing this lets us remove the special code to call SetConsoleCtrlHandler and instead integrate into gdb's approach to C-c handling. I believe that this should also fix the race that's described in the comment that's being removed. Initially, I thought a simpler version of this patch would work. However, I think what happens is that some other library (I'm not sure what) calls SetConsoleCtrlHandler while gdb is running, and this intercepts and handles C-c -- so that the gdb SIGINT handler is not called. C-break continues to work, presumably because whatever handler is installed ignores it. This patch works around this issue by ensuring that the gdb handler always comes first. 2022-12-13 Tom Tromey Refactor code to check for terminal sharing This refactors the code to check for terminal sharing. is_gdb_terminal is exported, and sharing_input_terminal_1 is renamed, slightly refactored, and moved to posix-hdep.c. A new Windows-specific implementation of this function is added to mingw-hdep.c. MSDN has a warning about GetConsoleProcessList This API is not recommended and does not have a virtual terminal equivalent. [...] Applications remoting via cross-platform utilities and transports like SSH may not work as expected if using this API. However, we believe this isn't likely to be an issue for gdb. 2022-12-13 Tom Tromey Use gdb::optional for sigint_ours sigint_ours (and sigquit_ours) can be used without being set. Avoid this problem by changing them to gdb::optional and checking that they are in fact set before using the value. Rename install_sigint_handler A subsequent patch will introduce a global 'install_sigint_handler' function, so first rename the static one in extension.c. 2022-12-13 Tom de Vries [gdb/tdep] Fix s390_linux_nat_target::stopped_by_watchpoint On s390x-linux, I run into: ... (gdb) continue^M Continuing.^M breakpoint.c:5784: internal-error: bpstat_stop_status_nowatch: \ Assertion `!target_stopped_by_watchpoint ()' failed.^M A problem internal to GDB has been detected,^M further debugging may prove unreliable.^M FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: \ breakpoint after the first fork (GDB internal error) ... What happens is the follow: - a watchpoint event triggers - the event is processed, s390_linux_nat_target::stopped_by_watchpoint is called and it returns true, as expected - the watchpoint event is reported by gdb, and gdb stops - we issue a continue command - a fork event triggers - the event is processed, and during processing that event s390_linux_nat_target::stopped_by_watchpoint is called again, and returns true - the assertion fails, because the function is expected to return false The function s390_linux_nat_target::stopped_by_watchpoint returns true the second time, because it looks at the exact same data that was looked at when it was called the first time, and that data hasn't changed. There's code in the same function that intends to prevent that from happening: ... /* Do not report this watchpoint again. */ memset (&per_lowcore, 0, sizeof (per_lowcore)); if (ptrace (PTRACE_POKEUSR_AREA, s390_inferior_tid (), &parea, 0) < 0) perror_with_name (_("Couldn't clear watchpoint status")); ... and that probably used to work for older kernels, but no longer does since linux kernel commit 5e9a26928f55 ("[S390] ptrace cleanup"). Fix this by copying this: ... siginfo_t siginfo; if (!linux_nat_get_siginfo (inferior_ptid, &siginfo)) return false; if (siginfo.si_signo != SIGTRAP || (siginfo.si_code & 0xffff) != TRAP_HWBKPT) return false; ... from aarch64_linux_nat_target::stopped_data_address and remove the obsolete watchpoint status clearing code. Tested on s390x-linux. Approved-By: Ulrich Weigand 2022-12-13 H.J. Lu gold: Remove BND from 64-bit x86-64 IBT PLT Since MPX support has been removed from x86-64 psABI, remove BND from 64-bit IBT PLT by using 32-bit IBT PLT. PR gold/29851 * x86_64.cc (Output_data_plt_x86_64_ibt<32>::first_plt_entry): Renamed to ... (Output_data_plt_x86_64_ibt::first_plt_entry): This. (Output_data_plt_x86_64_ibt<64>::first_plt_entry): Removed. (Output_data_plt_x86_64_ibt::do_fill_first_plt_entry): Drop the size == 32 check. (Output_data_plt_x86_64_ibt<32>::plt_entry): Renamed to ... (Output_data_plt_x86_64_ibt::plt_entry): This. (Output_data_plt_x86_64_ibt<64>::plt_entry): Removed. (Output_data_plt_x86_64_ibt<32>::aplt_entry): Renamed to ... (Output_data_plt_x86_64_ibt::aplt_entry): This. (Output_data_plt_x86_64_ibt<64>::aplt_entry): Removed. (Output_data_plt_x86_64_ibt::do_fill_plt_entry): Drop the size == 32 check. (Output_data_plt_x86_64_ibt::fill_aplt_entry): Likewise. 2022-12-13 Tom Tromey Remove two unnecessary casts A couple of calls to parse_probe_linespec had an unnecessary cast. I suspect this cast was never needed, but once commands were changed to take a 'const' argument, they became completely obsolete. Tested by rebuilding. 2022-12-13 Andrew Burgess gdb/testsuite: avoid creating temp file in gdb/testsuite/ directory After this commit: commit 33c1395cf5e9deec7733691ba32c450e5c27f757 Date: Fri Nov 11 15:26:46 2022 +0000 gdb/testsuite: fix gdb.trace/unavailable-dwarf-piece.exp with Clang The gdb.trace/unavailable-dwarf-piece.exp test script was creating a temporary file in the build/gdb/testsuite/ directory, instead of in the expected place in the outputs directory. Fix this by adding a call to standard_output_file. 2022-12-13 Tom de Vries [gdb/testsuite] Fix gdb.python/py-disasm.exp on s390x On s390x-linux, I run into: ... (gdb) disassemble test^M Dump of assembler code for function test:^M 0x0000000001000638 <+0>: stg %r11,88(%r15)^M 0x000000000100063e <+6>: lgr %r11,%r15^M 0x0000000001000642 <+10>: nop 0^M => 0x0000000001000646 <+14>: nop 0^M 0x000000000100064a <+18>: nop 0^M 0x000000000100064e <+22>: lhi %r1,0^M 0x0000000001000652 <+26>: lgfr %r1,%r1^M 0x0000000001000656 <+30>: lgr %r2,%r1^M 0x000000000100065a <+34>: lg %r11,88(%r11)^M 0x0000000001000660 <+40>: br %r14^M End of assembler dump.^M (gdb) FAIL: gdb.python/py-disasm.exp: global_disassembler=: disassemble test ... The problem is that the test-case expects "nop" but on s390x we have instead "nop\t0". Fix this by allowing the insn. Tested on s390x-linux and x86_64-linux. 2022-12-13 Jan Beulich gas: re-work line number tracking for macros and their expansions The PR gas/16908 workaround aimed at uniformly reporting line numbers to reference macro invocation sites. As mentioned in a comment this may be desirable for small macros, but often isn't for larger ones. As a first step improve diagnostics to report both locations, while aiming at leaving generated debug info unaltered. Note that macro invocation context is lost for any diagnostics issued only after all input was processed (or more generally for any use of as_*_where(), as the functions can't know whether the passed in location is related to [part of] the present stack of locations). To maintain the intended workaround behavior for PR gas/16908, a new as_where() is introduced to "look through" macro invocations, while the existing as_where() is renamed (and used in only very few places for now). Down the road as_where() will likely want to return a list of (file,line) pairs. 2022-12-13 Jan Beulich Arm: avoid unhelpful uses of .macro in testsuite Macros with just a single use site are a little pointless to have, and even in further cases .irp is more suitable for the purpose. Expand such inline, avoiding the need to touch the testcases when diagnostics are changed for code resulting from macro expansion. While there also make what was "iter_mla" in sp-usage-thumb2-relax cover smlatt as well, rather than testing smlabt twice. 2022-12-13 Tom Tromey Fix crash in is_nocall_function is_nocall_function anticipates only being called for a function or a method. However, PR gdb/29871 points out a situation where an unusual expression -- but one that parses to a valid, if extremely weird, function call -- breaks this assumption. This patch changes is_nocall_function to remove this assert and instead simply return 'false' in this case. Approved-By: Simon Marchi Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29871 2022-12-13 Johnson Sun Replace gdbpy_should_stop with gdbpy_breakpoint_cond_says_stop In 2014, the function `gdbpy_should_stop' has been replaced with `gdbpy_breakpoint_cond_says_stop' This replaces `gdbpy_should_stop' with `gdbpy_breakpoint_cond_says_stop' in the comments. Since `gdbpy_should_stop' has been renamed as noted in `gdb/ChangeLog-2014': * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed from gdbpy_should_stop. Change result type to enum scr_bp_stop. Change-Id: I0ef3491ce5e057c5e75ef8b569803b30a5838575 Approved-By: Simon Marchi 2022-12-13 Alan Modra asan: mips_hi16_list segfault in bfd_get_section_limit_octets static variables like mips_hi16_list are nasty for applications using bfd. It is possible when opening and closing bfds with mis-matched hi/lo relocs to leave a stale section pointer on the list. That can cause a segfault if multiple bfds are being processed. Tidying the list when closing is sufficient to stop this happening (and fixes small memory leaks). This patch goes further and moves mips_hi16_list to where it belongs in the bfd tdata. * elf32-mips.c (bfd_elf32_close_and_cleanup(: Define. * elf64-mips.c (bfd_elf64_close_and_cleanup): Define. * elfn32-mips.c (bfd_elf32_close_and_cleanup(: Define. * elfxx-mips.c (struct mips_hi16): Move earlier. (mips_hi16_list): Move to.. (struct mips_elf_obj_tdata): ..here. (_bfd_mips_elf_close_and_cleanup): New function. (_bfd_mips_elf_hi16_reloc, _bfd_mips_elf_lo16_reloc), (_bfd_elf_mips_get_relocated_section_contents): Adjust uses of mips_hi16_list. * elfxx-mips.h (_bfd_mips_elf_close_and_cleanup): Declare. 2022-12-13 GDB Administrator Automatic date update in version.in 2022-12-12 Indu Bhagat libctf: remove unnecessary zstd constructs This patch is essentially a revert of commit-id: 8818c80cbd4116ef5af171ec47c61167179e225c (libctf: Add ZSTD_LIBS to LIBS so that ac_cv_libctf_bfd_elf can be true) As the specific configure check now uses libtool, this explicit mention of the dependency $ZSTD_LIBS is not needed anymore. ChangeLog: * libctf/Makefile.in: Regenerated. * libctf/aclocal.m4: Likewise. * libctf/config.h.in: Likewise. * libctf/configure: Likewise. * libctf/configure.ac: Remove ZSTD_LIBS from LIBS. Cleanup unused AC_ZSTD. 2022-12-12 Indu Bhagat libctf: remove AC_CONFIG_MACRO_DIR ACLOCAL_AMFLAGS is being set already. So using AC_CONFIG_MACRO_DIR is unnecessary. ChangeLog: * libctf/configure: Regenerated. * libctf/configure.ac: remove AC_CONFIG_MACRO_DIR usage. 2022-12-12 Indu Bhagat libctf: remove unnecessary zlib constructs This dependency is managed via libtool. So explicit addition to LDFLAGS and LIBS is not necessary anymore. ChangeLog: * libctf/configure: Regenerated. * libctf/configure.ac: remove zlib from LDFLAGS and LIBS. 2022-12-12 Tom de Vries [gdb/testsuite] Fix PR20630 regression test in gdb.base/printcmds.exp On s390x-linux, I run into: ... (gdb) print {unsigned char}{65}^M $749 = 0 '\000'^M (gdb) FAIL: gdb.base/printcmds.exp: print {unsigned char}{65} ... In contrast, on x86_64-linux, we have: ... (gdb) print {unsigned char}{65}^M $749 = 65 'A'^M (gdb) PASS: gdb.base/printcmds.exp: print {unsigned char}{65} ... The first problem here is that the test is supposed to be a regression test for PR20630, which can be reproduced (for an unfixed gdb) like this: ... (gdb) p {unsigned char[]}{0x17} gdbtypes.c:4641: internal-error: copy_type: \ Assertion `TYPE_OBJFILE_OWNED (type)' failed. ... but it's not due to insufficient quoting (note the dropped '[]'). That's easy to fix, but after that we have on s390 (big endian): ... (gdb) print {unsigned char[]}{65}^M $749 = ""^M ... and on x86_64 (little endian): ... (gdb) print {unsigned char[]}{65}^M $749 = "A"^M ... Fix this by using 0xffffffff, such that in both cases we have: ... (gdb) print {unsigned char[]}{0xffffffff}^M $749 = "\377\377\377\377"^M ... Tested on x86_64-linux and s390x-linux. 2022-12-12 Alan Modra PR29893, buffer overflow in display_debug_addr PR 29893 * dwarf.c (display_debug_addr): Sanity check dwarf5 unit_length field. Don't read past end. 2022-12-12 Tom Tromey Another Rust operator precedence bug My earlier patch to fix PR rust/29859 introduced a new operator precedence bug in the Rust parser. Assignment operators are right-associative in Rust. And, while this doesn't often matter, as Rust assignments always have the value (), still as a matter of principle we should get this correct. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29859 2022-12-12 Tom de Vries [gdb/testsuite] Fix gdb.base/write_mem.exp for big endian On s390x-linux (big endian), I run into: ... (gdb) x /xh main^M 0x1000638
: 0x0000^M (gdb) FAIL: gdb.base/write_mem.exp: x /xh main ... In contrast, on x86_64-linux (little endian), we have the expected: ... (gdb) x /xh main^M 0x4004a7
: 0x4242^M (gdb) PASS: gdb.base/write_mem.exp: x /xh main ... The problem is that the test-case hard-codes expectations about endiannes by writing an int-sized value (4 bytes in this case) and then printing only a halfword by using "/h" (so, two bytes). If we print 4 bytes, we have for s390x: ... 0x1000638
: 0x00004242^M ... and for x86_64: ... 0x4004a7
: 0x00004242^M ... Fix this by removing the "/h". Tested on x86_64-linux and s390x-linux. 2022-12-12 Jan Vrany gdb: fix possible use-after-free when executing commands In principle, `execute_command()` does following: struct cmd_list_element *c; c = lookup_cmd ( ... ); ... /* If this command has been pre-hooked, run the hook first. */ execute_cmd_pre_hook (c); ... /* ...execute the command `c` ...*/ ... execute_cmd_post_hook (c); This may lead into use-after-free error. Imagine the command being executed is a user-defined Python command that redefines itself. In that case, struct `cmd_list_element` pointed to by `c` is deallocated during its execution so it is no longer valid when post hook is executed. To fix this case, this commit looks up the command once again after it is executed to get pointer to (possibly newly allocated) `cmd_list_element`. 2022-12-12 Jan Beulich x86: further re-work insn/suffix recognition to also cover MOVSX PR gas/29524 Having templates with a suffix explicitly present has always been quirky. After prior adjustment all that's left to also eliminate the anomaly from move-with-sign-extend is to consolidate the insn templates and to make may_need_pass2() cope (plus extend testsuite coverage). 2022-12-12 Jan Beulich x86: drop (now) stray IsString The need for them on the operand-less string insns has gone away with the removal of maybe_adjust_templates() and associated logic. Since i386_index_check() needs adjustment then anyway, take the opportunity and also simplify it, possible again as a result of said removal (plus the opcode template adjustments done here). 2022-12-12 Jan Beulich x86: move bad-use-of-TLS-reloc check Having it in match_template() is unhelpful. Neither does looking for the next template to possibly match make any sense in that case, nor is the resulting diagnostic making clear what the problem is. While moving the check, also generalize it to include all SIMD and VEX- encoded insns. This way an existing conditional can be re-used in md_assemble(). Note though that this still leaves a lof of insns which are also wrong to use with these relocations. Further fold the remaining check (BFD_RELOC_386_GOT32) with the XRELEASE related one a few lines down. This again allows re-using an existing conditional. 2022-12-12 Jan Beulich x86-64: allow HLE store of accumulator to absolute 32-bit address In commit 1212781b35c9 ("ix86: allow HLE store of accumulator to absolute address") I was wrong to exclude 64-bit code. Dropping the check also leads to better diagnostics in 64-bit code ("MOV", after all, isn't invalid with "XRELEASE"). While there also limit the amount of further checks done: The operand type checks that were there were effectively redundant with other ones anyway, plus it's quite fine to also have "xrelease mov , %eax" look for the next MOV template (in fact again also improving diagnostics). 2022-12-12 Jan Beulich ix86: don't recognize/derive Q suffix in the common case Have its use, except where actually legitimate, result in the same "only supported in 64-bit mode" diagnostic as emitted for other 64-bit only insns. Also suppress deriving of the suffix in Intel mode except in the legitimate cases. This in exchange allows dropping the respective code from match_template(). To maintain reasonable diagnostics (in particular to avoid "`mov' is only supported in 64-bit mode" on the SIMD forms of MOVQ) we need to defer parse_insn()'s emitting of errors unrelated to prefix parsing. Utilize i.error just like match_template() does. Oddly enough despite gcc's preference towards FILDQ and FIST{,T}Q we had no testcase whatsoever for these. Therefore such tests are being added. Note that the removed line in the x86-64-lfence-load testcase was redundant with the exact same one a few lines up. 2022-12-12 Jan Beulich x86: re-work insn/suffix recognition Having templates with a suffix explicitly present has always been quirky. Introduce a 2nd matching pass in case the 1st one couldn't find a suitable template _and_ didn't itself already need to trim off a suffix to find a match at all. This requires error reporting adjustments (albeit luckily fewer than I was afraid might be necessary), as errors previously reported during matching now need deferring until after the 2nd pass (because, obviously, we must not emit any error if the 2nd pass succeeds). While also related to PR gas/29524, it was requested that move-with-sign-extend be left as broken as it always was. PR gas/29525 Note that with the dropped CMPSD and MOVSD Intel Syntax string insn templates taking operands, mixed IsString/non-IsString template groups (with memory operands) cannot occur anymore. With that maybe_adjust_templates() becomes unnecessary (and is hence being removed). PR gas/29526 Note further that while the additions to the intel16 testcase aren't really proper Intel syntax, we've been permitting all of those except for the MOVD variant. The test therefore is to avoid re-introducing such an inconsistency. 2022-12-12 Jan Beulich x86: constify parse_insn()'s input The function doesn't alter its input buffer: Reflect this in its prototype. To avoid using any kind of cast, simply calculate the update of "line" from the function's input and output. x86: revert disassembler parts of "x86: Allow 16-bit register source for LAR and LSL" This reverts the disassembler parts of 859aa2c86dc9 ("x86: Allow 16-bit register source for LAR and LSL"), adjusting testcases as necessary. That change was itself a partial revert of c9f5b96bdab0 ("x86: correct handling of LAR and LSL"), without actually saying so. While the earlier commit was properly agreed upon, the partial revert was not, and hence should not have been committed. This is even more so that the revert part of that change wasn't even necessary to address PR gas/29844. 2022-12-12 Alan Modra PR29892, Field file_table of struct module is uninitialized PR 29892 * vms-alphs.c (new_module): Use bfd_zmalloc to alloc file_table. (parse_module): Rewrite file_table reallocation code and clear. Lack of bounds checking in vms-alpha.c parse_module PR 29873 PR 29874 PR 29875 PR 29876 PR 29877 PR 29878 PR 29879 PR 29880 PR 29881 PR 29882 PR 29883 PR 29884 PR 29885 PR 29886 PR 29887 PR 29888 PR 29889 PR 29890 PR 29891 * vms-alpha.c (parse_module): Make length param bfd_size_type. Delete length == -1 checks. Sanity check record_length. Sanity check DST__K_MODBEG, DST__K_RTNBEG, DST__K_RTNEND lengths. Sanity check DST__K_SOURCE and DST__K_LINE_NUM elements before accessing. (build_module_list): Pass dst_section size to parse_module. 2022-12-12 Alan Modra PR29872, uninitialised value in display_debug_lines_decoded dwarf.c:5413 Plus segvs if the C-library doesn't handle printf %s of NULL. PR 29872 * dwarf.c (null_name): New function. (process_debug_info): Use it here.. (display_debug_lines_raw): ..and here.. (display_debug_lines_decoded): ..and here. xcalloc directory_table. Simplify xcalloc of file_table. 2022-12-12 Jan Beulich gas/codeview: avoid "shadowing" of glibc function name While not "index" this time, old enough glibc also has an (unguarded) declaration of fileno() in stdio.h, which triggers a "shadows a global declaration" warning with our choice of warning level and with at least some gcc versions. x86: generate template sets data at build time Speed up gas startup by avoiding runtime allocation of the instances of type "templates". At the same time cut the memory requirement to just very little over half (not even accounting for any overhead notes_alloc() may incur) by reusing the "end" slot of a preceding entry for the "start" slot of the subsequent one. x86: drop sentinel from i386_optab[] Now that the table is local to gas, ARRAY_SIZE() can be used to determine the end of the table. Re-arrange the processing loop in md_begin() accordingly, at the same time folding the two calls to notes_alloc() into just one. x86: add generated tables dependency check to gas As requested by H.J., just for the sake of people potentially building in gas/ alone, add a check that the generated files in opcodes/ are actually up-to-date. Personally I think this should at best be a warning, but I can see how this may not be easily noticable among other make output (depending in particular on the verbosity level). x86: break gas dependency on libopcodes gas doesn't use anything from libopcodes anymore - suppress linking in that library. x86: remove i386-opc.c Remove the now empty i386-opc.c. To compensate, tie table generation in opcodes/ to the building of i386-dis.o, despite the file not really depending on the generated data. 2022-12-12 Jan Beulich x86: instantiate i386_{op,reg}tab[] in gas instead of in libopcodes Unlike many other architectures, x86 does not share an opcode table between assembly and disassembly. Any consumer of libopcodes would only ever access one of the two. Since gas is the only consumer of the assembly data, move it there. While doing so mark respective entities "static" in i386-gen (we may want to do away with i386_regtab_size altogether). This also shrinks the number of relocations to be processed for libopcodes.so by about 30%. 2022-12-12 GDB Administrator Automatic date update in version.in 2022-12-11 Alan Modra PR29870, objdump SEGV in display_debug_lines_decoded dwarf.c:5524 DWARF5 directory and file table allow more opportunity for fuzzers to break things. There are likely other places in dwarf.c that should be fixed too. PR 29870 * dwarf.c (display_debug_lines_decoded): Handle NULL file_table name entry. 2022-12-11 GDB Administrator Automatic date update in version.in 2022-12-10 Tom de Vries [gdb/tdep] Fix larl handling in s390_displaced_step_fixup On s390x-linux with target board unix/-m31, I run into: ... (gdb) PASS: gdb.guile/scm-lazy-string.exp: bad length print ptr^M $1 = 0x804006b0 ^M (gdb) FAIL: gdb.guile/scm-lazy-string.exp: ptr: print ptr ... A minimal example is: ... $ gdb -q -batch -ex "set trace-commands on" -x gdb.in +file scm-lazy-string +break main Breakpoint 1 at 0x4005d2: file scm-lazy-string.c, line 23. +run Breakpoint 1, main () at scm-lazy-string.c:23 23 const char *ptr = "pointer"; +step 24 const char array[] = "array"; +print ptr $1 = 0x804006b0 ... If we delete the breakpoint after running to it, we have instead the expected: ... +delete +step 24 const char array[] = "array"; +print ptr $1 = 0x4006b0 "pointer" ... The problem is in displaced stepping, forced by the presence of the breakpoint, when stepping over this insn: ... 0x4005d2 larl %r1,0x4006b0 ... With normal stepping we have: ... (gdb) p /x $r1 $2 = 0x3ff004006b0 ... but with displaced stepping we have instead (note the 0x80000000 difference): ... (gdb) p /x $r1 $1 = 0x3ff804006b0 (gdb) ... The difference comes from this code in s390_displaced_step_fixup: ... /* Handle LOAD ADDRESS RELATIVE LONG. */ else if (is_ril (insn, op1_larl, op2_larl, &r1, &i2)) { /* Update PC. */ regcache_write_pc (regs, from + insnlen); /* Recompute output address in R1. */ regcache_cooked_write_unsigned (regs, S390_R0_REGNUM + r1, amode | (from + i2 * 2)); } ... where the "amode |" adds the 0x80000000. Fix this by removing the "amode |". Tested on s390-linux, with native and target board unix/-m31. Approved-By: Ulrich Weigand 2022-12-10 GDB Administrator Automatic date update in version.in 2022-12-09 Indu Bhagat objdump: sframe: fix memory leaks ChangeLog: * binutils/objdump.c (dump_section_sframe): free up contents and SFrame decoder context on exit. 2022-12-09 Indu Bhagat libsframe: rename API sframe_fde_func_info to sframe_fde_create_func_info The new name better reflects the purpose of the function. ChangeLog: * bfd/elfxx-x86.c (_bfd_x86_elf_create_sframe_plt): Use new name. * libsframe/sframe.c (sframe_fde_create_func_info): Rename sframe_fde_func_info to this. * libsframe/testsuite/libsframe.encode/encode-1.c: Use new name. include/ChangeLog: * sframe-api.h (sframe_fde_create_func_info): Rename sframe_fde_func_info to this. 2022-12-09 Indu Bhagat gas: sframe: fine tune the fragment fixup for SFrame func info SFrame function info is an unsigned 8-bit field comprising of the following (from LSB to MSB): - 4-bits: FRE type - 1-bit: FRE start address encoding - 3-bits: Unused At the moment, the most-significat 4-bits are zero (The FRE start address encoding of SFRAME_FDE_TYPE_PCINC has a value of zero, and the upper 3-bits are unused). So the current implementation works without this patch. To be precise, however, the fragment fixup logic is meant to fixup only the least-significant 4-bits (i.e., only the FRE type needs to be updated according to the function size). This patch makes the gas implementation a bit more resilient: In the future, when the format does evolve to make use of the currently unused 3-bits in various ways, the values in those 3-bits can be propagated unchanged while the fragment fixup continues to update the lowermost 4-bits to indicate the selected FRE type. ChangeLog: * gas/gen-sframe.c (create_func_info_exp): New definition. (output_sframe_funcdesc): Call create_func_info_exp. * gas/sframe-opt.c (sframe_estimate_size_before_relax): The associated fragment uses O_modulus now. (sframe_convert_frag): Adjust the fragment fixup code according to the new composite exp. 2022-12-09 Indu Bhagat sframe: gas: libsframe: define constants and remove magic numbers Define constants in sframe.h for the various limits associated with the range of offsets that can be encoded in the start address of an SFrame FRE. E.g., sframe_frame_row_entry_addr1 is used when start address offset can be encoded as 1-byte unsigned value. Update the code in gas to use these defined constants as it checks for these limits, and remove the usage of magic numbers. ChangeLog: * gas/sframe-opt.c (sframe_estimate_size_before_relax): (sframe_convert_frag): Do not use magic numbers. * libsframe/sframe.c (sframe_calc_fre_type): Likewise. include/ChangeLog: * sframe.h (SFRAME_FRE_TYPE_ADDR1_LIMIT): New constant. (SFRAME_FRE_TYPE_ADDR2_LIMIT): Likewise. (SFRAME_FRE_TYPE_ADDR4_LIMIT): Likewise. 2022-12-09 Indu Bhagat sframe.h: make some macros more precise include/ChangeLog: * sframe.h (SFRAME_V1_FUNC_INFO): Use specific bits only. (SFRAME_V1_FRE_INFO): Likewise. 2022-12-09 Indu Bhagat libsframe: minor formatting nits ChangeLog: * libsframe/sframe.c: Fix formatting nits. 2022-12-09 Luis Machado [aarch64] Add TPIDR2 register support for Linux With the AArch64 Scalable Matrix Extension we have a new TPIDR2 register, and it will be added to the existing NT_ARM_TLS register set. Kernel patches are being reviewed here: https://lore.kernel.org/linux-arm-kernel/20220818170111.351889-1-broonie@kernel.org/ From GDB's perspective, we handle it in a similar way to the existing TPIDR register. But we need to consider cases of systems that only have TPIDR and systems that have both TPIDR and TPIDR2. With that in mind, the following patch adds the required code to support TPIDR2 and turns the org.gnu.gdb.aarch64.tls feature into a dynamically-generated target description as opposed to a static target description containing only TPIDR. That means we can remove the gdb/features/aarch64-tls.xml file and replace the existing gdb/features/aarch64-tls.c auto-generated file with a new file that dynamically generates the target description containing either TPIDR alone or TPIDR and TPIDR2. In the future, when *BSD's start to support this register, they can just enable it as is being done for the AArch64 Linux target. The core file read/write code has been updated to support TPIDR2 as well. On GDBserver's side, there is a small change to the find_regno function to expose a non-throwing version of it. It always seemed strange to me how find_regno causes the whole operation to abort if it doesn't find a particular register name. The patch moves code from find_regno into find_regno_no_throw and makes find_regno call find_regno_no_throw instead. This allows us to do register name lookups to find a particular register number without risking erroring out if nothing is found. The patch also adjusts the feature detection code for aarch64-fbsd, since the infrastructure is shared amongst all aarch64 targets. I haven't added code to support TPIDR2 in aarch64-fbsd though, as I'm not sure when/if that will happen. 2022-12-09 Alan Modra PR28306, segfault in _bfd_mips_elf_reloc_unshuffle Access to section data during relocation processing should be bounds checked, as it is in bfd_perform_relocation. bfd_perform_relocation does these checks after any special_function is called. So a reloc special_function needs to do its own bounds checking before accessing section data. This patch adds many such checks to the mips backend. Checking mips relocs is not without some difficulty. See the comment in _bfd_mips_reloc_offset_in_range. In a multitple reloc sequence applied to the same location, relocs that may appear somewhere other than the last one of the sequence need to be treated specially since they apply to the addend for the next relocation rather than the section contents. If the addend is in the section then it needs to be checked but not when the addend is in the reloc. check_inplace handles this situation. _bfd_mips_reloc_offset_in_range with check_shuffle handles the case where contents are shuffled before applying the relocation. PR 28306 * elf32-mips.c (_bfd_mips_elf32_gprel16_reloc): Check reloc address using _bfd_mips_reloc_offset_in_range. (gprel32_with_gp, mips16_gprel_reloc): Likewise. * elf64-mips.c (mips_elf64_gprel32_reloc): Likewise. (mips16_gprel_reloc): Likewise. * elfn32-mips.c (mips16_gprel_reloc): Likewise. (gprel32_with_gp): Check reloc address using bfd_reloc_offset_in_range. * elfxx-mips.h (enum reloc_check): Define. (_bfd_mips_reloc_offset_in_range): Declare. * elfxx-mips.c (needs_shuffle): New function. (_bfd_mips_elf_reloc_unshuffle, _bfd_mips_elf_reloc_shuffle): Use it. (_bfd_mips_reloc_offset_in_range): New function. (_bfd_mips_elf_gprel16_with_gp): Move reloc address checks to partial_inplace handling. Use bfd_reloc_offset_in_range. (_bfd_mips_elf_lo16_reloc): Check reloc address using bfd_reloc_offset_in_range. (_bfd_mips_elf_generic_reloc): Check reloc address using _bfd_mips_reloc_offset_in_range. (mips_elf_calculate_relocation): Check reloc address before calling mips_elf_nullify_got_load. (_bfd_mips_elf_check_relocs): Likewise. (mips_elf_read_rel_addend): Add sec param, check reloc address before reading. Adjust callers. (mips_elf_add_lo16_rel_addend): Add sec param, adjust callers. 2022-12-09 Tom de Vries [gdb/testsuite] Fix gdb.guile/scm-symtab.exp for ppc64le On powerpc64le-linux, I run into: ... (gdb) PASS: gdb.guile/scm-symtab.exp: step out of func2 guile (print (> (sal-line (find-pc-line (frame-pc (selected-frame)))) line))^M = #f^M (gdb) FAIL: gdb.guile/scm-symtab.exp: test find-pc-line with resume address ... The problem is as follows: the instructions for the call to func2 are: ... 1000070c: 39 00 00 48 bl 10000744 10000710: 00 00 00 60 nop 10000714: 59 00 00 48 bl 1000076c 10000718: 00 00 00 60 nop 1000071c: 00 00 20 39 li r9,0 ... and the corresponding line number info is: ... scm-symtab.c: File name Line number Starting address View Stmt scm-symtab.c 42 0x1000070c x scm-symtab.c 43 0x10000714 x scm-symtab.c 44 0x1000071c x ... The test-case looks at the line numbers for two insns: - the insn of the call to func2 (0x10000714), and - the insn after that (0x10000718), and expects the line number of the latter to be greater than the line number of the former. However, both insns have the same line number: 43. Fix this by replacing ">" with ">=". Tested on x86_64-linux and powerpc64le-linux. 2022-12-09 GDB Administrator Automatic date update in version.in 2022-12-08 H.J. Lu x86-64: Remove BND from 64-bit IBT PLT Since MPX support has been removed from x86-64 psABI, remove BND from 64-bit IBT PLT by using x32 IBT PLT. bfd/ PR ld/29851 * elf64-x86-64.c (elf_x86_64_get_synthetic_symtab): Also check x32 IBT PLT for 64-bit. (elf_x86_64_link_setup_gnu_properties): Always use x32 IBT PLT. ld/ PR ld/29851 * testsuite/ld-x86-64/ibt-plt-1.d: Updated. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3b.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/plt-main-ibt-x32.dd: Moved to ... * testsuite/ld-x86-64/plt-main-ibt.dd: This. * testsuite/ld-x86-64/x86-64.exp: Don't use plt-main-ibt-x32.dd. 2022-12-08 Tom de Vries [gdb/testsuite] Require debug info for gdb.tui/tui-layout-asm-short-prog.exp When running test-case gdb.tui/tui-layout-asm-short-prog.exp on SLE-12-SP3 aarch64, I run into: ... FAIL: gdb.tui/tui-layout-asm-short-prog.exp: check asm box contents FAIL: gdb.tui/tui-layout-asm-short-prog.exp: check asm box contents again ... due to: ... (gdb) file tui-layout-asm-short-prog^M Reading symbols from tui-layout-asm-short-prog...^M (No debugging symbols found in tui-layout-asm-short-prog)^M ... I managed to reproduce the same behaviour on openSUSE Leap 15.4 x86_64, by removing the debug option. Fix this by making the test-case unsupported if no debug info is found. Tested on x86_64-linux. 2022-12-08 Enze Li gdb/testsuite: update a pattern in gdb_file_cmd When building GDB with the following CFLAGS and CXXFLAGS as part of configure line: CFLAGS=-std=gnu11 CXXFLAGS=-std=gnu++11 Then run the selftest.exp, I see: ====== Running /home/lee/dev/binutils-gdb/gdb/testsuite/gdb.gdb/selftest.exp ... FAIL: gdb.gdb/selftest.exp: run until breakpoint at captured_main WARNING: Couldn't test self === gdb Summary === # of unexpected failures 1 /home/lee/dev/binutils-gdb/gdb/gdb version 13.0.50.20221206-git -nw -nx -iex "set height 0" -iex "set width 0" -data-directory /home/lee/dev/binutils-gdb/gdb/testsuite/../data-directory ====== It is the fact that when I use the previously mentioned CFLAGS and CXXFLAGS as part of the configuration line, the default value (-O2 -g) is overridden, then GDB has no debug information. When there's no debug information, GDB should not run the testcase in selftest.exp. The root cause of this FAIL is that the $gdb_file_cmd_debug_info didn't get the right value ("nodebug") during the gdb_file_cmd procedure. That's because in this commit, commit 3453e7e409f44a79ac6695589836edb8a49bfb08 Date: Sat May 19 11:25:20 2018 -0600 Clean up "Reading symbols" output It changed "no debugging..." to "No debugging..." which causes the above problem. This patch only updates the corresponding pattern to fix this issue. With this patch applied, I see: ====== Running /home/lee/dev/binutils-gdb/gdb/testsuite/gdb.gdb/selftest.exp ... === gdb Summary === # of untested testcases 1 /home/lee/dev/binutils-gdb/gdb/gdb version 13.0.50.20221206-git -nw -nx -iex "set height 0" -iex "set width 0" -data-directory /home/lee/dev/binutils-gdb/gdb/testsuite/../data-directory ====== Tested on x86_64-linux. Approved-By: Simon Marchi 2022-12-08 Nick Clifton Update the description of the linker script's TYPE directive. PR 29861 * ld.texi (Output Section Type): Note that setting the output section type only works if the section contains untyped data. 2022-12-08 Jan Vrany gdb: skip objfiles with no BFD in DWARF unwinder While playing with JIT reader I experienced GDB to crash on null-pointer dereference when stepping through non-jitted code. The problem was that dwarf2_frame_find_fde () assumed that all objfiles have BFD but that's not always true. To address this problem, this commit skips such objfiles. To test the fix we put breakpoint in jit_function_add (). The JIT reader does not know how unwind this function so unwinding eventually falls back to DWARF unwinder which in turn iterates over objfiles. Since the the code is jitted, it is guaranteed it would eventually process JIT objfile. Approved-By: Simon Marchi 2022-12-08 Alan Modra libctf: avoid potential double free * ctf-link.c (ctf_link_add_cu_mapping): Set t NULL after free. 2022-12-08 GDB Administrator Automatic date update in version.in 2022-12-07 Peter Bergner PowerPC: Add support for RFC02655 - Saturating Subtract Instruction opcodes/ * ppc-opc.c (XOL): New define. (XOL_MASK): Likewise. (powerpc_opcodes): Add subfus, subfus., subwus, subwus., subdus, subdus. gas/ * testsuite/gas/ppc/rfc02655.s: New test. * testsuite/gas/ppc/rfc02655.d: Likewise * testsuite/gas/ppc/future-raw.s: Likewise. * testsuite/gas/ppc/future-raw.d: Likewise. * testsuite/gas/ppc/ppc.exp: Run them. 2022-12-07 Peter Bergner PowerPC: Add support for RFC02656 - Enhanced Load Store with Length Instructions opcodes/ * ppc-opc.c (PPCVSXF): New define. (powerpc_opcodes): Add lxvrl, lxvrll, lxvprl, lxvprll, stxvrl, stxvrll, stxvprl, stxvprl. gas/ * testsuite/gas/ppc/rfc02656.s: New test. * testsuite/gas/ppc/rfc02656.d: Likewise. * testsuite/gas/ppc/ppc.exp: Run it. 2022-12-07 Simon Marchi gdb: add invalidate_selected_frame function Instead of using `select_frame (nullptr)` to invalidate the selected frame, introduce a function to do that. There is no change in behavior, but it makes the intent a bit clearer. It also allows adding an assert in select_frame that fi is not nullptr, so it avoids passing nullptr by mistake. Change-Id: I61643f46bc8eca428334513ebdaadab63997bdd0 Reviewed-By: Bruno Larsen 2022-12-07 Tom de Vries [gdb/testsuite] Add KFAILs in gdb.base/longjmp.exp Add KFAILs in test-case gdb.base/longjmp.exp for PR gdb/26967, covering various ways that gdb is unable to recover the longjmp target if the libc probe is not supported. Tested on x86_64-linux. Approved-By: Simon Marchi 2022-12-07 Tom Tromey Remove unnecessary xstrdup from bppy_init I saw that bppy_init used a non-const "char *". Fixing this revealed that the xstrdup here was also unnecessary, so this patch removes it. 2022-12-07 Alan Modra coff make_a_section_from_file tidy Also support compressing a few more sections. * coffgen.c (make_a_section_from_file): Rename return_section to newsect. Don't try to be clever matching section name. Compress .gnu.debuglto_.debug_ and .gnu.linkonce.wi. too. Only rename debug sections when decompressing for linker. 2022-12-07 Alan Modra gas compress_debug tidy * write.c (compress_debug): Don't set up "ob" until after seginfo NULL check. Simplify SEC_CONTENTS test. Localise variables. Use bfd_debug_name_to_zdebug. _bfd_elf_slurp_secondary_reloc_section sanity check * elf.c (_bfd_elf_slurp_secondary_reloc_section): Sanity check section header against file size. Avoid overflow in reloc_count. bfd_compress_section_contents access to elf_section_data * compress.c (bfd_compress_section_contents): Don't access elf_section_data for non-ELF. 2022-12-07 Alan Modra Compression tidy and fixes Tidies: - Move stuff from bfd-in.h and libbfd.c to compress.c - Delete COMPRESS_DEBUG from enum compressed_debug_section_type - Move compress_debug field out of link_info to ld_config. Fixes: - Correct test in bfd_convert_section_setup to use obfd flags, not ibfd. - Apply bfd_applicable_file_flags to compression bfd flags added by gas and ld to the output bfd. bfd/ * bfd-in.h (enum compressed_debug_section_type), (struct compressed_type_tuple), (bfd_get_compression_algorithm), (bfd_get_compression_algorithm_name), * libbfd.c (compressed_debug_section_names), (bfd_get_compression_algorithm), (bfd_get_compression_algorithm_name): Move.. * compress.c: ..to here, deleting COMPRESS_DEBUG from enum compressed_debug_section_type. (bfd_convert_section_setup): Test obfd flags not ibfd for compression flags. * elf.c (elf_fake_sections): Replace link_info->compress_debug test with abfd->flags test. * bfd-in2.h: Regenerate. binutils/ * objcopy.c (copy_file): Tidy setting of bfd compress flags. Expand comment. gas/ * write.c (compress_debug): Test bfd compress flags rather than flag_compress_debug. (write_object_file): Apply bfd_applicable_file_flags to compress debug flags added to output bfd. include/ * bfdlink.h (struct bfd_link_info): Delete compress_debug. ld/ * ld.h (ld_config_type): Add compress_debug. * emultempl/elf.em: Replace references to link_info.compress_debug with config.compress_debug. * lexsup.c (elf_static_list_options): Likewise. * ldmain.c (main): Likewise. Apply bfd_applicable_file_flags to compress debug flags added to output bfd. 2022-12-07 GDB Administrator Automatic date update in version.in 2022-12-06 H.J. Lu bfd: Avoid signed overflow for new_size adjustment When bfd_size_type is unsigned 64-bit integer and sizeof is unsigned 32-bit integer, subtraction in *new_size += sizeof (Elf32_External_Chdr) - sizeof (Elf64_External_Chdr); will overflow. Use *new_size -= sizeof (Elf64_External_Chdr) - sizeof (Elf32_External_Chdr); to avoid overflow. PR binutils/29860 * compress.c (bfd_convert_section_setup): Avoid signed overflow for new_size adjustment. 2022-12-06 Tom Tromey Cosmetic fix in ppc-sysv-tdep.c This is just a couple of cosmetic fixes in ppc-sysv-tdep.c: fixing some formatting and correcting a typo. Fix operator precedence bug in Rust parser PR rust/29859 points out an operator precedence bug in the Rust parser. This patch fixes it and adds a regression test. 2022-12-06 Nick Clifton Fix a dereference of NULL when scanning the symbol hashes array in the ARM linker. PR 29852 * elf32-arm.c (cmse_scan): Check for NULL entries in the sym_hashes array. (elf32_arm_gc_mark_extra_sections): Likewise. 2022-12-06 Tom de Vries [gdb/testsuite] Fix test names in gdb.base/longjmp.exp When running test-case gdb.base/longjmp.exp, we have: ... PASS: gdb.base/longjmp.exp: next over setjmp (1) ... PASS: gdb.base/longjmp.exp: next over setjmp (2) ... The trailing " (1)" and " (2)" are interpreted as comments rather than parts of the test name, and therefore this is a duplicate, which is currently not detected by our duplicate detection mechanism (PR testsuite/29772). Fix the duplicate by using with_test_prefix. Tested on x86_64-linux. 2022-12-06 Tom de Vries [gdb/testsuite] Make gdb.base/longjmp.exp FAIL more stable across archs When running test-case gdb.base/longjmp.exp on x86_64-linux, the master longjmp breakpoint is set using probes and the test-case passes: ... (gdb) PASS: gdb.base/longjmp.exp: next to longjmp (1) next^M 0x00000000004005cc 49 if (setjmp (env) == 0) /* patt1 */^M (gdb) PASS: gdb.base/longjmp.exp: next over longjmp(1) next^M 56 resumes++;^M (gdb) PASS: gdb.base/longjmp.exp: next into else block (1) ... However, if I disable create_longjmp_master_breakpoint_probe, we have instead: ... (gdb) PASS: gdb.base/longjmp.exp: next to longjmp (1) next^M 56 resumes++;^M (gdb) FAIL: gdb.base/longjmp.exp: next over longjmp(1) ... At first glance, the failure mode doesn't look too bad: we stop a few insns later than the passing scenario. For contrast, if we do the same on powerpc64le, the failure mode is: ... (gdb) PASS: gdb.base/longjmp.exp: next to longjmp (1) next^M ^M Breakpoint 3, main () at longjmp.c:59^M 59 i = 1; /* miss_step_1 */^M (gdb) FAIL: gdb.base/longjmp.exp: next over longjmp(1) ... Here we only stop because of running into the safety net breakpoint at miss_step_1. So, how does this happen on x86_64? Let's look at the code: ... 4005c7: e8 94 fe ff ff call 400460 <_setjmp@plt> 4005cc: 85 c0 test %eax,%eax 4005ce: 75 1e jne 4005ee 4005d0: 8b 05 8e 0a 20 00 mov 0x200a8e(%rip),%eax # 601064 4005d6: 83 c0 01 add $0x1,%eax 4005d9: 89 05 85 0a 20 00 mov %eax,0x200a85(%rip) # 601064 4005df: be 01 00 00 00 mov $0x1,%esi 4005e4: bf 80 10 60 00 mov $0x601080,%edi 4005e9: e8 82 fe ff ff call 400470 4005ee: 8b 05 74 0a 20 00 mov 0x200a74(%rip),%eax # 601068 ... The next over the longjmp call at 4005e9 is supposed to stop at the longjmp target at 4005cc, but instead we stop at 4005ee, where we have the step-resume breakpoint inserted by the next. In other words, we accidentally "return" from the longjmp call to the insn immediately after it (even though a longjmp is a noreturn function). Try to avoid this accident and make the failure mode on x86_64 the same as on powerpc64le, by switching the then and else branch. Tested on x86_64-linux. 2022-12-06 Xiao Zeng gdb/riscv: correct dwarf to gdb register number mapping According to the riscv psabi, the mapping relationship between the DWARF registers and the machine registers is as follows: DWARF Number | Register Name | Description 0 - 31 | x0 - x31 | Integer Registers 32 - 63 | f0 - f31 | Floating-point Registers This is not modelled quite right in riscv_dwarf_reg_to_regnum, the DWARF register numbers 31 and 63 are not handled correctly due to a use of '<' instead of '<='. This commit fixes this issue. 2022-12-06 Haochen Jiang x86: Remove unnecessary vex.w check for xh_mode in disassembler For all the xh_mode usage in table, they are all using %XH, which will print "{bad}" while EVEX.W=1. This makes this vex.w check unnecessary. opcodes/ChangeLog: * i386-dis.c (OP_E_memory): Remove vex.w check for xh_mode. 2022-12-06 Alan Modra Get rid of SEC_ELF_COMPRESS This flag also isn't needed, except for some sanity checks which we can omit. * elf.c (elf_fake_sections): Don't set SEC_ELF_COMPRESS for compressed debug sections, just leave sh_name as -1. (assign_file_positions_for_non_load_sections), (assign_file_positions_except_relocs): Decide whether a section needs compressing and thus should not have its file offset set by looking at sh_name. (_bfd_elf_assign_file_positions_for_non_load): Similarly decide which sections need compressing. * elflink.c (bfd_elf_final_link): Don't test SEC_ELF_COMPRESS. * merge.c (_bfd_write_merged_section): Likewise. * section.c (SEC_ELF_COMPRESS): Don't define. (SEC_ELF_PURECODE): Renumber. * bfd-in2.h: Regenerate. 2022-12-06 Alan Modra Get rid of SEC_ELF_RENAME SEC_ELF_RENAME is a flag used to effect section name changes when compressing/decompressing zlib-gnu debug sections. This can be accomplished more directly in one of the objcopy specific bfd functions. Renaming for ld input is simplified too. Ld input object files always have BFD_DECOMPRESS set. bfd/ * compress.c (bfd_convert_section_size): Rename to.. (bfd_convert_section_setup): ..this. Handle objcopy renaming of compressed/decompressed debug sections. * elf.c (_bfd_elf_make_section_from_shdr): Only rename zdebug input for linker. (elf_fake_sections): Don't handle renaming of debug sections for objcopy here. * section.c (SEC_ELF_RENAME): Delete. * bfd-in2.h: Regenerate. binutils/ * objcopy.c (setup_section): Call bfd_convert_section_setup. Don't call bfd_convert_section_size. 2022-12-06 Alan Modra Compression header enum Define an enum instead of using ELFCOMPRESS_ZLIB and ELFCOMPRESS_ZSTD in bfd and binutils, and move some functions from bfd.c to compress.c. When looking at the COFF/PE debug compression support, I wondered about extending it to support zstd. I likely won't do that, but the compression header ch_type field isn't just ELF specific if these headers are to be used in COFF/PE too. bfd/ * bfd.c (bfd_update_compression_header), (bfd_check_compression_header, bfd_get_compression_header_size), (bfd_convert_section_size, bfd_convert_section_contents): Move to.. * compress.c: ..here. (enum compression_type): New. Use it throughout file. * elf.c (_bfd_elf_make_section_from_shdr): Replace uses of ELFCOMPRESS_ZLIB and ELFCOMPRESS_ZSTD with ch_compress_zlib and ch_compress_zstd. * bfd-in2.h: Regenerate. binutils/ * readelf.c (process_section_headers, dump_section_as_strings), (dump_section_as_bytes, load_specific_debug_section): Replace uses of ELFCOMPRESS_ZLIB and ELFCOMPRESS_ZSTD with ch_compress_zlib and ch_compress_zstd. 2022-12-06 mengqinggang LoongArch: Fix dynamic reloc not generated bug in some cases. bfd/ChangeLog: * elfnn-loongarch.c (loongarch_elf_relocate_section): Likewise. 2022-12-06 Alan Modra PR29855, ch_type in bfd_init_section_decompress_status can be uninitialized PR 29855 * compress.c (bfd_init_section_decompress_status): Set ch_type to zero for zlib-gnu case. 2022-12-06 GDB Administrator Automatic date update in version.in 2022-12-05 Simon Marchi gdb/linux-nat: add ptid parameter to linux_xfer_siginfo Make the inferior_ptid bubble up to linux_nat_target::xfer_partial. Change-Id: I62dbc5734c26648bb465f449c2003c73751cd812 2022-12-05 Simon Marchi gdb/linux-nat: use l linux_nat_get_siginfo in linux_xfer_siginfo I noticed we could reduce duplication a bit here. Change-Id: If24e54d1dac71b46f7c1f68a18a073d4c084b644 2022-12-05 Simon Marchi gdb/linux-nat: check ptrace return value in linux_nat_get_siginfo Not a big deal, but it seems strange to check errno instead of the ptrace return value to know whether it succeeded. Change-Id: If0a6d0280ab0e5ecb077e546af0d6fe489c5b9fd 2022-12-05 Simon Marchi gdb/linux-nat: don't memset siginfo on failure in linux_nat_get_siginfo No caller cares about the value of *SIGINFO on failure. It's also documented in the function doc that *SIGINFO is uninitialized (I understand "untouched") on failure. Change-Id: I5ef38a5f58e3635e109b919ddf6f827f38f1225a 2022-12-05 Simon Marchi gdb/linux-nat: bool-ify linux_nat_get_siginfo Change return type to bool. Change-Id: I1bf0360bfdd1b5994cd0f96c268d806f96fe51a4 2022-12-05 Simon Marchi gdb/linux-nat: use get_ptrace_pid in two spots No behavior change expected. Change-Id: Ifaa64ecd619483646b024fd7c62e571e92a8eedb 2022-12-05 Simon Marchi gdb/testsuite: remove perror calls when failing to run I noticed that when running these two tests in sequence: Running /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.ada/arrayptr.exp ... ERROR: GDB process no longer exists ERROR: Couldn't run foo-all Running /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.ada/assign_1.exp ... The results in gdb.sum are: Running /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.ada/arrayptr.exp ... PASS: gdb.ada/arrayptr.exp: scenario=all: compilation foo.adb ERROR: GDB process no longer exists UNRESOLVED: gdb.ada/arrayptr.exp: scenario=all: gdb_breakpoint: set breakpoint at foo.adb:40 (eof) ERROR: Couldn't run foo-all Running /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.ada/assign_1.exp ... UNRESOLVED: gdb.ada/assign_1.exp: changing the language to ada PASS: gdb.ada/assign_1.exp: set convenience variable $xxx to 1 The UNRESOLVED for arrayptr.exp is fine, as GDB crashes in that test, while trying to run to main. However, the UNRESOLVED in assign_1.exp doesn't make sense, GDB behaves as expected in that test: (gdb) set lang ada^M (gdb) UNRESOLVED: gdb.ada/assign_1.exp: changing the language to ada print $xxx := 1^M $1 = 1^M (gdb) PASS: gdb.ada/assign_1.exp: set convenience variable $xxx to 1 The problem is that arrayptr.exp calls perror when failing to run to main, then returns. perror makes it so that the next test (as in pass/fail) will be recorded as UNRESOLVED. However, here, the next test (as in pass/fail) is in the next test (as in .exp). Hence the spurious UNRESOLVED in assign_1.exp. These perror when failing to run to X are not really useful, especially since runto records a FAIL on error, by default. Remove all the perrors on runto failure I could find. When there wasn't one already, add a return statement when failing to run, to avoid running the test of the test unnecessarily. I thought of adding a check ran between test (in gdb_finish probably) where we would emit a warning if errcnt > 0, meaning a test quit and left a perror "active". However, reading that variable would poke into the DejaGNU internals, not sure it's a good idea. Change-Id: I2203df6d06e199540b36f56470d1c5f1dc988f7b 2022-12-05 Luis Machado Add missing newline to gdbarch_tdep debugging output The missing newline causes testsuite issues because the gdb prompt gets output to an unexpected location. 2022-12-05 Nick Clifton Prevent an illegal memory access when comparing the prefix of a section name regexp. PR 29849 * ldlang.c (spec_match): Check that there is sufficient length in the target name to match the spec's prefix. 2022-12-05 Martin Liska testsuite: support mold linker Mold linker demotes symbols like main to be local and the patch adjusts expected output from nm. Moreover, simplify the regex patterns. 2022-12-05 Thiago Jung Bauermann gdbarch.py: Fix indentation in the generated set_gdbarch_* definitions Use as many tabs as possible for indentation and pad with spaces to keep the argument aligned to the opening parenthesis in the line above. Co-developed-by: Simon Marchi Approved-By: Simon Marchi 2022-12-05 Thiago Jung Bauermann gdbarch.py: Fix indentation in the generated gdbarch_dump function Use tab for the first eight spaces of indentation, and align the gdb_printf arguments to the open parenthesis of the function call. Approved-By: Simon Marchi 2022-12-05 Thiago Jung Bauermann gdb: Update my email address in MAINTAINERS 2022-12-05 Jan Beulich gas: add Dwarf line number test for .macro expansions Before fiddling with the code let's put in place a test covering what PR/gas 16908 aimed at. gas: squash (some) .linefile from listings Not so long ago we started to insert these artificially when expanding certain macro-like constructs; zap them as cluttering what actually results from user input. 2022-12-05 Jan Beulich gas: avoid inserting extra newline in buffer_and_nest() In "-alm" listings I've noticed an odd blank line following the inserted .linefile one. This results from the explicit NL inserted being redundant with the one left in place from the original input line by all respective callers. Note that we need to compensate for the removed line by bumping the directive argument (which in turn is decremented again in s_linefile() before calling new_logical_line_flags(), and I have to confess that when putting together the original change I was a little puzzled by the imbalance of increments/decrements, but then I forgot to actually go look for the cause). While there also switch to sb_add_string() instead of effectively open- coding it to some degree. 2022-12-05 Jan Beulich Arm: .noinit and .persistent are not supported for Linux targets Respective tests being run means guaranteed failures. 2022-12-05 Nick Clifton Fix an illegal memory access when parsing a corrupt VMS Alpha file. PR 29848 * vms-alpha.c (parse_module): Fix potential out of bounds memory access. 2022-12-05 Andrew Burgess libopcodes/mips: add support for disassembler styling This commit adds disassembler styling support for MIPS. After this commit objdump and GDB will style disassembler output. This is a pretty straight forward change, we switch to use the disassemble_info::fprintf_styled_func callback, and pass an appropriate style through as needed. No additional tricks were needed (compared to say i386, or ARM). Tested by running all of the objdump commands used by the gas testsuite and manually inspecting the styled output, everything looks reasonable, though I'm not a MIPS expert, so it is possible that I've missed some corner cases. Worst case though is that something will be styled incorrectly, the actual content should be unchanged. All the gas, ld, and binutils tests still pass for me. 2022-12-05 Andrew Burgess opcodes/mips: use .word/.short for undefined instructions While working on disassembler styling for MIPS, I noticed that undefined instructions are printed by the disassembler as raw number with no assembler directive prefix (e.g. without .word or .short). I think adding something like .word, or .short, helps to make it clearer the size of the value that is being displayed, and is inline with what many of the other libopcode disassemblers do. In this commit I've added the .word and .short directives, and updated all the tests that I spotted that failed as a result. 2022-12-05 Alan Modra Re: Renaming .debug to .zdebug and vice versa * compress.c (bfd_debug_name_to_zdebug): Fix C++ compile error. (bfd_zdebug_name_to_debug): Likewise. * bfd-in2.h: Regenerate. 2022-12-05 GDB Administrator Automatic date update in version.in 2022-12-04 Alan Modra PR29846, segmentation fault in objdump.c compare_symbols Fixes a fuzzed object file problem where plt relocs were manipulated in such a way that two synthetic symbols were generated at the same plt location. Won't occur in real object files. PR 29846 PR 20337 * objdump.c (compare_symbols): Test symbol flags to exclude section and synthetic symbols before attempting to check flavour. 2022-12-04 Alan Modra COFF compressed debug support Since commit 4bea06d73c04 COFF support for compressed debug sections has been broken due to the "flags" variable not getting SEC_HAS_CONTENTS. * coffgen.c (make_a_section_from_file): Correct section flags handling. Delete extraneous condition. Update error messages to be the same as in elf.c. 2022-12-04 Alan Modra Renaming .debug to .zdebug and vice versa Move a couple of elf.c functions to compress.c. * compress.c (bfd_debug_name_to_zdebug): New inline function. (bfd_zdebug_name_to_debug): Likewise. * elf.c (convert_debug_to_zdebug, convert_zdebug_to_debug): Delete. (_bfd_elf_make_section_from_shdr, elf_fake_sections), (_bfd_elf_assign_file_positions_for_non_load): Adjust to suit. * coffgen.c (make_a_section_from_file): Use new inlines here. 2022-12-04 GDB Administrator Automatic date update in version.in 2022-12-03 H.J. Lu Revert "ld: Add .note.GNU-stack to ld-plugin/dummy.s" This reverts commit 44e59b5a7d8a874f6546a1471b8a003911853aa0. It works only for ELF targets. 2022-12-03 H.J. Lu ld: Add .note.GNU-stack to ld-plugin/dummy.s * testsuite/ld-plugin/dummy.s: Add .note.GNU-stack. 2022-12-03 H.J. Lu x86: Allow 16-bit register source for LAR and LSL Since LAR and LSL only access 16 bits of the source operand, regardless of operand size, allow 16-bit register source for LAR and LSL, and always disassemble LAR and LSL with 16-bit source operand. gas/ PR gas/29844 * testsuite/gas/i386/i386.s: Add tests for LAR and LSL. * testsuite/gas/i386/x86_64.s: Likewise. * testsuite/gas/i386/intelbad.s: Remove "lar/lsl eax, ax". * testsuite/gas/i386/i386-intel.d: Updated. * testsuite/gas/i386/i386.d: Likewise. * testsuite/gas/i386/intel-intel.d: Likewise. * testsuite/gas/i386/intel.d: Likewise. * testsuite/gas/i386/intelbad.l: Likewise. * testsuite/gas/i386/x86_64-intel.d: Likewise. * testsuite/gas/i386/x86_64.d: Likewise. opcodes/ PR gas/29844 * i386-dis.c (MOD_0F02): Removed. (MOD_0F03): Likewise. (dis386_twobyte): Restore larS and lslS. (mod_table): Remove MOD_0F02 and MOD_0F03. * i386-opc.tbl: Allow 16-bit register source for LAR and LSL. * i386-tbl.h: Regenerated. 2022-12-03 GDB Administrator Automatic date update in version.in 2022-12-02 Simon Marchi gdb/linux-nat: add pid parameter to linux_proc_xfer_memory_partial Add a pid parameter to linux_proc_xfer_memory_partial, making the inferior_ptid reference bubble up close to the target_ops::xfer_partial boundary. No behavior change expected. Change-Id: I58171b00ee1bba1ea22efdbb5dcab8b1ab3aac4c 2022-12-02 Simon Marchi gdb: add some debug statements to solib-svr4.c Add a few debug statements that were useful to me when debugging why the glibc probes interface wasn't getting used. Change-Id: Ic20744f9fc80a90f196896b0829949411620c540 2022-12-02 Simon Marchi gdb: merge solib-frv aix-solib debug options into "set/show debug solib" solib implementations are typically used one at a time. So it will be rare that you will want to enable debug for one solib kind, and absolutely want to keep the others disabled. To make things simpler, instead of adding separate variables / macros / commands for each solib implementation, merge the existing ones (frv and aix) into a unified "set/show debug solib", with the solib_debug_printf macro. Change-Id: I6e18bbc7401724f37ae66681badb079d75ecf7fa 2022-12-02 Nick Clifton Add Jan Beulich as an x86_64 maintainer. 2022-12-02 Jan Beulich x86: drop most OPERAND_TYPE_* (and rework the rest) With the general use of C99 there's no need anymore to have i386-gen produce these. For more frequently used ones introduce local #define-s, while others are simply spelled out directly. While doing this move some static constants into more narrow scopes. Note that as a "side effect" this corrects type_names[]'es imm8s entry. 2022-12-02 Jan Beulich x86: simplify and slightly correct XCHG vs NOP checking For one, because of CheckRegSize, there's no need to check the size of both (register) operands. And then in process_suffix() check opcode space rather than the (potentially ambiguous) extension opcode. x86: also use D for XCHG and TEST Leverage the C (commutative) attribute to also reduce the number of XCHG and TEST templates we have. This way the reg <-> r/m (and reg <-> reg for XCHG) forms can also be folded into a single template each, utilizing D. 2022-12-02 Tom de Vries [gdb/testsuite] Prevent timeout in gdb.ada/float-bits.exp Recent commit 32a5aa26256 ("[gdb/testsuite] Fix gdb.ada/float-bits.exp for powerpc64le") started using command "maint print architecture", which produces ~275 lines. Rewrite the corresponding gdb_test_multiple to read line-by-line, to prevent timeouts on slower test setups. Note that this doesn't fix a timeout in the test-case on aarch64 due to: ... gdbarch_dump: read_core_file_mappings = <0x817438> (gdb) aarch64_dump_tdep: Lowest pc = 0x0x8000 ... Tested on x86_64-linux. 2022-12-02 GDB Administrator Automatic date update in version.in 2022-12-01 Carl Love PowerPC, fix gdb.reverse/finish-reverse-bkpt.exp and gdb.reverse/next-reverse-bkpt-over-sr.exp The tests set a break point with the command break *func. This sets a breakpoint on the first instruction of the function. PowerPC uses Global Entry Points (GEP) and Local Entry Points (LEP). The first instruction in the function is the GEP. The GEP sets up register r2 before reaching the LEP. When the function is called with func() the function is entered via the LEP and the test fails because GDB does not see the breakpoint on the GEP. However, if the function is called via a function pointer, execution begins at the GEP as the test expects. Currently finish-reverse-bkpt.exp uses source file finish-reverse.c and next-reverse-bpkt-over-sr.exp uses source file step-reverse.c A new source file was created for tests finish-reverse-bkpt.exp and next-reverse-bkpt-over-sr.exp. The new files use the new function pointer method to call the functions so the tests will work correctly on both PowerPC with a GEP and LEP as well as on other systems. The GEP is the same as the LEP on non PowerPC systems. The expect files were changed to use the new source files and to set the initial break point for the rest of the test on the function pointer call for the function. This patch fixes two PowerPC test failures in each of the tests gdb.reverse/finish-reverse-bkpt.exp and gdb.reverse/next-reverse-bkpt-over-sr.exp. Patch tested on PowerPC and Intel X86-64 with no regressions. Reviewed-By: Bruno Larsen 2022-12-01 Tom Tromey Remove call to registers_changed from windows-nat.c I noticed that windows_nat_target::interrupt calls registers_changed. However, I don't think there's any reason to do this, because this will happen automatically when the inferior stop is processed. Approved-By: Simon Marchi 2022-12-01 Tom Tromey Remove the_windows_nat_target global I belatedly realized that the "the_windows_nat_target" global isn't really necessary. It's only used in one place, where 'this' would be simpler and clearer. This patch removes the global entirely. Approved-By: Simon Marchi 2022-12-01 Simon Marchi gdb: make frame_register static It is only used inside frame.c. Change-Id: I44eb46a5992412f8f8b4954b2284b0ef3b549504 2022-12-01 Tom Tromey Add name canonicalization for C PR symtab/29105 shows a number of situations where symbol lookup can result in the expansion of too many CUs. What happens is that lookup_signed_typename will try to look up a type like "signed int". In cooked_index_functions::expand_symtabs_matching, when looping over languages, the C++ case will canonicalize this type name to be "int" instead. Then this method will proceed to expand every CU that has an entry for "int" -- i.e., nearly all of them. A crucial component of this is that the caller, objfile::lookup_symbol, does not do this canonicalization, so when it tries to find the symbol for "signed int", it fails -- causing the loop to continue. This patch fixes the problem by introducing name canonicalization for C. The idea here is that, by making C and C++ agree on the canonical name when a symbol name can have multiple spellings, we avoid the bad behavior in objfile::lookup_symbol (and any other such code -- I don't know if there is any). Unlike C++, C only has a few situations where canonicalization is needed. And, in particular, due to the lack of overloading (thus avoiding any issues in linespec) and due to the way c-exp.y works, I think that no canonicalization is needed during symbol lookup -- only during symtab construction. This explains why lookup_name_info is not touched. The stabs reader is modified on a "best effort" basis. The DWARF reader needed one small tweak in dwarf2_name to avoid a regression in dw2-unusual-field-names.exp. I think this is adequately explained by the comment, but basically this is a scenario that should not occur in real code, only the gdb test suite. lookup_signed_typename is simplified. It used to search for two different type names, but now gdb can search just for the canonical form. gdb.dwarf2/enum-type.exp needed a small tweak, because the canonicalizer turns "unsigned integer" into "unsigned int integer". It seems better here to use the correct C type name. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29105 Tested-by: Simon Marchi Reviewed-by: Andrew Burgess 2022-12-01 Tom Tromey Refactor cooked_index::do_finalize This refactors cooked_index::do_finalize, reordering an 'if' to make it a little less redundant. This change makes a subsequent patch easier to read. Reviewed-by: Andrew Burgess 2022-12-01 Tom Tromey Remove language check from dwarf2_compute_name dwarf2_compute_name has a redundant check of the CU's language -- this is also checked in dwarf2_canonicalize_name. Removing this slightly simplifies a future patch. Reviewed-by: Andrew Burgess 2022-12-01 Simon Marchi gdb/dwarf: add some QUIT macros While testing the fix for PR 29105, I noticed I couldn't ctrl-C my way out of GDB expanding many symtabs. GDB was busy in a loop in cooked_index_functions::expand_symtabs_matching. Add a QUIT there. I also happened to see a spot in cooked_index_functions::expand_matching_symbols where a QUIT would be useful too, since we iterate over a potentially big number of index entries and expand CUs in the loop. Add one there too. Change-Id: Ie1d650381df7f944c16d841b3e592d2dce7306c3 Approved-By: Kevin Buettner 2022-12-01 Simon Marchi gdb: remove prune_threads in thread_db_target::update_thread_list Pedro mentioned that this prune_threads call in thread_db_target::update_thread_list was not needed, and it was probably an oversight to leave it there in the work following commit e8032dde10b ("Push pruning old threads down to the target"). That commit changed the "find new threads" target operation to "update thread list", making the target responsible of adding new threads and removing exited threads, rather than just adding new threads. Commit e8032dde10b moved the prune_threads calls previously done in common code into each target's update_thread_list method, in order to keep the existing behavior, which is why this prune_threads call ended up there. In the mean time, the linux-nat target was taught to update_thread_list, and thread_db_target::update_thread_list defers to that for any live inferior, so the prune_threads call is not needed there. Otherwise, the thread_db_target::update_thread_list implementation based on td_ta_thr_iter_p only knows how to add new threads, not how to delete exited threads, but that is only used for non-live inferiors, where threads can't exit anyway. So the prune_threads call is not needed for that case either. Change-Id: I127fd4f84c25086f97853dadf34c5cec6816840d Approved-By: Pedro Alves 2022-12-01 H.J. Lu opcodes: Remove i386-init.h and i386-tbl.h from HFILES i386-init.h and i386-tbl.h are generated files. There is nothing to translate. Remove them from HFILES (POTFILES). * Makefile.am (HFILES): Remove i386-init.h and i386-tbl.h. * Makefile.in: Regenerated. * po/POTFILES.in: Likewise. 2022-12-01 Tom Tromey Avoid timeouts in gdb.compile PR compile/29541 points out that some of the C++ tests in gdb.compile will time out when the glibc debuginfo is installed. This was interfering with my hacking on gdb by making test runs extremely long, so I looked into it. Internally the bug seems to be that gdb tries to convert multiple symbols named "var" via the compiler interface; one such symbol (I didn't track it down too far) causes the C++ compiler plugin to crash. Unfortunately, the crash is reported as a timeout, as the gdb side of the plugin simply hangs. This seems like a bug in the plugin RPC mechanism and, worse, apparently when I wrote this stuff I didn't really consider error reporting very much at all, so gdb can't really detect failures in the first place. Anyway... this patch works around the timeout by compiling a simple test that should provoke this bug, and then using "untested" if it notices a GCC crash. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29541 2022-12-01 Tom Tromey Remove obsolete check from skip_compile_feature_tests skip_compile_feature_tests checks for "Command not supported on this host", but this error was removed by commit e8d8cce6 ("Import mkdtemp gnulib module, fix mingw build"). This patch removes the obsolete test. Remove one copy of skip_compile_feature_tests I noticed that there are two identical copies of skip_compile_feature_tests in the test suite. This removes one from gdb.exp, in favor of the one in compile-support.exp. 2022-12-01 Clément Chigot binutils: improve holes detection in .debug_loclists. The previous warnings about holes in .debug_loclists sections don't take into account the headers of each CU and could include the locviews if they precede the loclist. The following warning can be triggered between two CU. ... ... 0000001d 0000002a v000000000000000 v000000000000000 location view pair 0000002c v000000000000000 v000000000000000 location view pair readelf: Warning: There is a hole [0x1e - 0x2e] in .debug_loclists section. 0000002e v000000000000000 v000000000000000 views at 0000002a for: ... But [0x1e - 0x2a] corresponds to the CU header and [0x2a - 0x2e] are the locviews. Thus there is no hole here. binutils/ChangeLog: * dwarf.c (display_debug_loc): Adjust holes detections for headers and locviews. 2022-12-01 Nick Clifton Fix verilog output when the width is > 1. PR 25202 bfd * bfd.c (VerilogDataEndianness): New variable. (verilog_write_record): Use VerilogDataEndianness, if set, to choose the endianness of the output. (verilog_write_section): Adjust the address by the data width. binutils* objcopy.c (copy_object): Set VerilogDataEndianness to the endianness of the input file. (copy_main): Verifiy the value set by the --verilog-data-width option. * testsuite/binutils-all/objcopy.exp: Add tests of the new behaviour. * testsuite/binutils-all/verilog-I4.hex: New file. 2022-12-01 Jan Beulich x86: rework of match_template()'s suffix checking (Ab)using i386_opcode_modifier for this has been overkill, as the logic doesn't really require the full structure. With the removal of LONG_DOUBLE_MNEM_SUFFIX and No_ldSuf there's no good reason at all anymore to pull out such a loop invariant: We're dealing a check of a bit in the loop for a simple comparison. Do the original compares inside the loop, thus also making it easier to understand what is actually being checked. x86: drop No_ldSuf With LONG_DOUBLE_MNEM_SUFFIX gone there'salso no use for No_ldSuf anymore. x86/Intel: drop LONG_DOUBLE_MNEM_SUFFIX With the removal of its use for FPU insns the suffix is now finally properly misnamed. Drop its use altogether, replacing it by a separate boolean instead. x86/Intel: restrict use of LONG_DOUBLE_MNEM_SUFFIX As a comment near the top of match_template() already says: We really only need this pseudo-suffix for far branch handling. Stop "deriving" it for floating point insns. (Don't bother renaming the now properly misnamed LONG_DOUBLE_MNEM_SUFFIX, to e.g. FAR_BRANCH_SUFFIX - it's going to disappear anyway.) 2022-12-01 Tom de Vries [gdb/testsuite] Wait longer for core generation When I run the gdb testsuite on a powerpc64le-linux system with (slow) nfs file system, I run into timeouts due to core generation, like for instance: ... (gdb) gcore $outputs/gdb.ada/task_switch_in_core/crash.gcore^M FAIL: gdb.ada/task_switch_in_core.exp: save a corefile (timeout) ... Fix this by using with_timeout_factor 3 in gdb_gcore_cmd. Tested on powerpc64le-linux. Approved-By: Tom Tromey 2022-12-01 Tom de Vries [gdb/testsuite] Fix gdb.ada/float-bits.exp for powerpc64le On powerpc64le-linux, I run into: ... (gdb) print 16llf#4000921fb54442d18469898cc51701b8#^M $9 = ^M (gdb) FAIL: gdb.ada/float-bits.exp: print \ 16llf#4000921fb54442d18469898cc51701b8# ... The problem is that we're using a hex string for the 128-bit IEEE quad long double format, but the actual long double float format is: ... gdbarch_dump: long_double_format = floatformat_ibm_long_double_little^M ... Fix this by using the hex string obtained by compiling test.c: ... long double a = 5.0e+25L; ... like so: ... $ gcc -mlittle test.c -c -g ... and running gdb: ... $ gdb -q -batch test.o -ex "p /x a" $1 = 0xc1e1c000000000004544adf4b7320335 ... and likewise for -mbig: ... $ gdb -q -batch test.o -ex "p /x a" $1 = 0x4544adf4b7320335c1e1c00000000000 ... Tested on powerpc64le-linux. I excercised the case of floatformat_ibm_long_double_big by using "set endian big" in the test-case. Note that for this patch to work correctly, recent commit aaa79cd62b8 ("[gdb] Improve printing of float formats") is required. PR testsuite/29816 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29816 Approved-By: Tom Tromey 2022-12-01 GDB Administrator Automatic date update in version.in 2022-11-30 Tom de Vries [gdb/testsuite] Fix DUPLICATEs in s390-multiarch.exp On s390x-linux, I run into: ... DUPLICATE: gdb.arch/s390-multiarch.exp: Linux v2 DUPLICATE: gdb.arch/s390-multiarch.exp: Linux v2 DUPLICATE: gdb.arch/s390-multiarch.exp: Linux v2 ... Fix this by using with_test_prefix. Tested on s390x-linux. 2022-11-30 Tom de Vries [gdb/testsuite] Enable gdb.arch/s390-disassembler-options.exp for --enable-targets=all On s390x-linux, I run into: ... DUPLICATE: gdb.arch/s390-disassembler-options.exp: \ show disassembler-options esa ... First, reproduce this on x86_64-linux with --enable-targets=all, by replacing the test for 'istarget "s390*-*-*"' with a test for 'get_set_option_choices "set architecture" "s390"'. Fix the DUPLICATE by using with_test_prefix. Also modernize the test-case by using clean_restart instead of gdb_exit/gdb_start. Tested on x86_64-linux. 2022-11-30 Michael Matz section-select: Fix exclude-file-3 this testcase wasn't correctly testing everything, it passed, even though sections from an excluded file were included. Fixing this reveals a problem in the new section selector. This fixes that as well. section-select: Remove unused code walk_wild_file, hence walk_wild_section and walk_wild_section_handler aren't called with the prefix tree. Hence initialization of the latter and all potential special cases for it aren't used anymore. That also removes the need to handler_data[] and some associated helper functions. So, remove all of that. 2022-11-30 Michael Matz section-select: Implement a prefix-tree Now that we have a list of potentially matching sections per wild statement we can actually pre-fill that one by going once over all input sections and match their names against a prefix-tree that points to the potentially matching wild statements. So instead of looking at all sections names for each glob for each wild statement we now look at the sections only once and then only check against those globs that have a possibility of a match at all (usually only one or two). This pushes the whole section selection off the profiles. 2022-11-30 Michael Matz section-select: Completely rebuild matches The check_relocs callback (and others) might have created new section behind our back and some of them (e.g. on powerpc the "linker stubs" .got) need to come in front of all others, despite being created late (a symptom would be "TOC opt*" failing on powerpc). This resets all section matches before updating for newly created sections (i.e. completely rebuilds the matches). 2022-11-30 Michael Matz section-select: Lazily resolve section matches and remember the results. Before this the order of section matching is basically: foreach script-wild-stmt S foreach pattern P of S foreach inputfile I foreach section S of I match S against P if match: do action for S And this process is done three or four times: for each top-level call to walk_wild() or wild(), that is: check_input_sections, lang_gc_sections, lang_find_relro_sections and of course map_input_to_output_sections. So we iterate over all sections of all files many many times (for each glob). Reality is a bit more complicated (some special glob types don't need the full iteration over all sections, only over all files), but that's the gist of it. For future work this shuffles the whole ordering a bit by lazily doing the matching process and memoizing results, trading a little memory for a 75% speedup of the overall section selection process. This lazy resolution introduces a problem with sections added late that's corrected in the next patch. 2022-11-30 Tom Tromey Bounds check access to Ada task state names While looking into Ada tasking a little, I noticed that no bounds checking is done on accesses to the Ada task state names arrays. This isn't a problem currently, but if the runtime ever added numbers -- or if there was some kind of runtime corruption -- it could cause a gdb crash. This patch adds range checking. It also adds a missing _() call when printing from the 'task_states' array. 2022-11-30 Tom Tromey Use ui_file_up in mi_interp This changes mi_interp to use ui_file_up rather than explicit management. Approved-By: Simon Marchi 2022-11-30 Tom Tromey Rename fields of cli_interp_base::saved_output_files This renames the fields of cli_interp_base::saved_output_files, as requested by Simon. I tried to choose names that more obviously reflect what the field is used for. I also added a couple of comments. Approved-By: Simon Marchi 2022-11-30 Tom de Vries [gdb] Improve printing of float formats Currently, on x86_64, a little endian target, I get: ... $ gdb -q -batch -ex "maint print architecture" | grep " = floatformat" gdbarch_dump: bfloat16_format = floatformat_bfloat16_big gdbarch_dump: double_format = floatformat_ieee_double_big gdbarch_dump: float_format = floatformat_ieee_single_big gdbarch_dump: half_format = floatformat_ieee_half_big gdbarch_dump: long_double_format = floatformat_i387_ext ... which suggests big endian. This is due to this bit of code in pformat: ... /* Just print out one of them - this is only for diagnostics. */ return format[0]->name; ... Fix this by using gdbarch_byte_order to pick the appropriate index, such that we have the more accurate: ... gdbarch_dump: bfloat16_format = floatformat_bfloat16_little gdbarch_dump: half_format = floatformat_ieee_half_little gdbarch_dump: float_format = floatformat_ieee_single_little gdbarch_dump: double_format = floatformat_ieee_double_little gdbarch_dump: long_double_format = floatformat_i387_ext ... Tested on x86_64-linux. 2022-11-30 Alan Modra Correct ordering problem in comm-data.exp * testsuite/ld-elf/comm-data.exp: Build libcomm-data.so before attempting to read it to set ELF64. regen SRC-POTFILES.in 2022-11-30 Jan Beulich x86/Intel: adjustment to restricted suffix derivation In "x86/Intel: restrict suffix derivation" I think I screwed up slightly, bringing a piece of code out of sync with its comment, and resulting in a suffix potentially being derived when one isn't needed. 2022-11-30 Jan Beulich x86: clean up after removal of support for gcc <= 2.8.1 At the very least a comment in process_operands() is stale. Beyond that there are effectively two options: 1) It is possible that FADDP and FMULP were mistakenly not marked as being in need of dealing with the compiler anomaly, and hence the respective templates weren't removed at the time when they should have been. 2) It is also possible that there are indeed uses known beyond compiler generated output for these two commutative opcodes, and hence the templates need to stay. To be on the safe side assume 2: Update the comment and fold the templates into their "normal" ones (utilizing D), adjusting consuming code accordingly. For FMULP also add a comment paralleling a similar one FADDP has. 2022-11-30 Jan Beulich x86: drop FloatR There are just 4 templates using it, which can be easily identified by other means, as D is set only on a very limited number of FPU templates. Also move the respective conditional out of the code path taken by all "reverse match" insns (it probably should have been this way already before, to avoid the one conditional in the common case). With this the templates which had FloatR dropped no longer differ from their AT&T syntax + mnemonic counterparts - the only difference is now which of the two would be recognized. For this, however, we don't need two templates - we can simply arrange the condition for setting Opcode_FloatR accordingly. 2022-11-30 Jan Beulich x86: extend FPU test coverage for AT&T / Intel mnemonic differences Before touching the templates, let's ensure we actually cover things: For one FSUB{,R} and FDIV{,R} would better be tested with operands in both possible orders. And then -mmnemonic=intel wasn't tested at all. 2022-11-30 Joel Brobecker src-release.sh: Fix gdb source tarball build failure due to libsframe This script was recently changed as follow: | commit e619dddb3a45780ae66d762756882a3b896b617d | Date: Tue Nov 15 15:07:13 2022 -0800 | Subject: src-release.sh: Add libsframe | | Add libsframe to the list of top level directories that will be included | in a release. Since then, the gdb source tarball has been failing with the error below during the "make configure-host configure-target" phase: | make[3]: *** No rule to make target '../libsframe/libsframe.la', | needed by 'libbfd.la'. Stop. | make[3]: Leaving directory '/tmp/gdb-public/bfd' This patch fixes the issue by adding libsframe to the list of GDB_SUPPORT_DIRS, similar to what was done for BINUTILS. ChangeLog: * src-release.sh (GDB_SUPPORT_DIRS): Add libsframe. 2022-11-30 GDB Administrator Automatic date update in version.in 2022-11-29 Tom de Vries [gdb/testsuite] Fix gdb.base/vla-optimized-out.exp for ppc64le On powerpc64le-linux, I run into: ... (gdb) PASS: gdb.base/vla-optimized-out.exp: o1: printed optimized out vla p sizeof (a)^M $2 = ^M (gdb) FAIL: gdb.base/vla-optimized-out.exp: o1: \ printed size of optimized out vla ... The problem happens as follows. In order to find the size of the optimized out vla, gdb needs to evaluate: ... <155> DW_AT_upper_bound : 13 byte block: f3 1 53 23 1 8 20 24 8 20 26 31 1c \ (DW_OP_GNU_entry_value: (DW_OP_reg3 (r3)); DW_OP_plus_uconst: 1; DW_OP_const1u: 32; DW_OP_shl; DW_OP_const1u: 32; DW_OP_shra; DW_OP_lit1; DW_OP_minus) ... When trying to evaluate DW_OP_GNU_entry_value, it looks for a call site matching the pc, but doesn't find it: ... $ gdb -q -batch outputs/gdb.base/vla-optimized-out/vla-optimized-out-o1 \ -ex "break f1" -ex run -ex "set debug entry-values 1" -ex "print sizeof (a)" Breakpoint 1 at 0x1000067c: file vla-optimized-out.c, line 34. Breakpoint 1, f1 (i=5) at vla-optimized-out.c:34 34 } DW_OP_entry_value resolving cannot find DW_TAG_call_site 0x100006b0 in main $1 = .... The call site lookup fails because the call site label .LVL4: ... bl f1 # 11 *call_value_nonlocal_aixdi [length = 8] nop .LVL4: ... is not placed directly after the bl insn. This is gcc PR target/107909. However, after manually fixing the .s file we have instead: ... Cannot find matching parameter at DW_TAG_call_site 0x10000690 at main $1 = ... due to the fact that the call site has no call site parameters. The call site does have a reference to the corresponding function f1, with parameter i, for which we find location list entries: ... 0037 1000067c 10000680 (DW_OP_reg3 (r3)) 004a 10000680 10000690 (DW_OP_GNU_entry_value: (DW_OP_reg3 (r3)); DW_OP_stack_value) ... and we could use the fact that the current pc is in the 1000067c-10000680 range, and that that the range starts at the start of the function, to deduce that DW_OP_GNU_entry_value: (DW_OP_reg3 (r3)) == DW_OP_reg3 (r3). But that's a non-trivial enhancement, filed as enhancement PR symtab/29836. Fix this by allowing for target powerpc and the gcc compiler. Reviewed-By: Carl Love Tested-By: Carl Love PR testsuite/29813 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29813 2022-11-29 Simon Marchi gdb/testsuite: make gdb_unload use gdb_test_multiple In the failure seen by Philippe here: https://inbox.sourceware.org/gdb-patches/20221120173024.3647464-1-philippe.waroquiers@skynet.be/ gdb_unload crashed GDB, leaving no trace in the test results. Change it to use gdb_test_multiple, so that it leaves an UNRESOLVED result. I think it is good practice anyway. Make it return the result of gdb_test_multiple directly, change gdb.python/py-objfile.exp accordingly. Change gdb.base/endian.exp as well to avoid duplicate test names. Change gdb.base/gnu-debugdata.exp to avoid recording a test result, since gdb_unload does it already now. Change-Id: I59a1e4947691330797e6ce23277942547c437a48 Approved-By: Tom de Vries 2022-11-29 Simon Marchi gdb/testsuite: make gdb_test_multiple return immediately if send_gdb fails In the failure seen by Philippe here: https://inbox.sourceware.org/gdb-patches/20221120173024.3647464-1-philippe.waroquiers@skynet.be/ ... the testsuite only outputs PASSes, and an ERROR, resulting from an uncaught exception. This is a bit sneaky, because ERRORs are not reported in the test summary. In certain circumstances, it can be easy to miss. Normally, gdb_test_multiple outputs an UNRESOLVED when GDB crashes. But this is only if it manages to send the command, and it's that command that crashes GDB. Here, the ERROR is due to the fact that GDB had already crashed by the time we entered gdb_test_multiple and tried to send a command. GDB was crashed by the previous "file" command, sent by gdb_unload. Because gdb_unload uses bare expect, it didn't record a test failure when crashing GDB (this will be addressed separately). In this patch, I propose to make gdb_test_multiple call unresolved directly and return -1 send_gdb fails. This way, if GDB is already crashed by the time we enter gdb_test_multiple, it will leave a trace in the test results in the form of an UNRESOLVED. It will also spare us the not-so-useful-in-my-opinion TCL backtrace. Before, it looks like: ERROR: Couldn't send python print(objfile.filename) to GDB. ERROR: : spawn id exp9 not open while executing "expect { -i exp9 -timeout 10 -re ".*A problem internal to GDB has been detected" { fail "$message (GDB internal error)" gdb_internal_error..." ("uplevel" body line 1) invoked from within "uplevel $body" NONE : spawn id exp9 not open And after: Couldn't send python print(objfile.filename) to GDB. UNRESOLVED: gdb.python/py-objfile.exp: objfile.filename after objfile is unloaded Change-Id: I72af8dc0d687826fc3f76911c27a9e5f91b677ba Approved-By: Tom de Vries 2022-11-29 Vladimir Mezentsev gprofng: remove unused gprofng/src/DbeSession.cc.1 2022-11-29 Max Filippov xtensa: allow dynamic configuration Import include/xtensa-dynconfig.h that defines XCHAL_* macros as fields of a structure returned from the xtensa_get_config_v function call. Define that structure and fill it with default parameter values specified in the include/xtensa-config.h. Define reusable function xtensa_load_config that tries to load configuration and return an address of an exported object from it. Define functions xtensa_get_config_v{1,2} that use xtensa_load_config to get structures xtensa_config_v{1,2}, either dynamically configured or the default. bfd/ * Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Append xtensa-dynconfig.c. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac (xtensa_elf32_be_vec, xtensa_elf32_le_vec): Add xtensa-dynconfig.lo to the tb. * elf32-xtensa.c (xtensa-config.h): Replace #include with xtensa-dynconfig.h. (XSHAL_ABI, XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0): Remove definitions. * xtensa-dynconfig.c: New file. * xtensa-isa.c (xtensa-dynconfig.h): New #include. (xtensa_get_modules): New function. (xtensa_isa_init): Call xtensa_get_modules instead of taking address of global xtensa_modules. gas/ * config/tc-xtensa.c (xtensa-config.h): Replace #include with xtensa-dynconfig.h. (XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0, XTENSA_MARCH_EARLIEST): Remove definitions. * config/tc-xtensa.h (xtensa-config.h): Replace #include with xtensa-dynconfig.h. * config/xtensa-relax.c (xtensa-config.h): Replace #include with xtensa-dynconfig.h. (XCHAL_HAVE_WIDE_BRANCHES): Remove definition. include/ * xtensa-dynconfig.h: New file. ld/ * emultempl/xtensaelf.em (xtensa-config.h): Replace #include with xtensa-dynconfig.h. (XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0): Remove definitions. 2022-11-29 GDB Administrator Automatic date update in version.in 2022-11-28 Andrew Burgess gdb/testsuite: remove use of then keyword from library files The canonical form of 'if' in modern TCL is 'if {} {}'. But there's still a bunch of places in the testsuite where we make use of the 'then' keyword, and sometimes these get copies into new tests, which just spreads poor practice. This commit removes all use of the 'then' keyword from the testsuite library files (in boards/, config/, and lib/). Previous commits have removed all uses of the 'then' keyword from the test script files, this commit just cleans up the library files. There should be no changes in what is tested after this commit. 2022-11-28 Andrew Burgess gdb/testsuite: remove use of then keyword from gdb.*/*.exp scripts The canonical form of 'if' in modern TCL is 'if {} {}'. But there's still a bunch of places in the testsuite where we make use of the 'then' keyword, and sometimes these get copies into new tests, which just spreads poor practice. This commit removes all use of the 'then' keyword from the remaining gdb.*/*.exp scripts. Previous commits have done the bulk of this removal, this commit just handles the remaining directories that each contain a low number of instances. There should be no changes in what is tested after this commit. 2022-11-28 Andrew Burgess gdb/testsuite: remove use of then keyword from gdb.multi/*.exp The canonical form of 'if' in modern TCL is 'if {} {}'. But there's still a bunch of places in the testsuite where we make use of the 'then' keyword, and sometimes these get copies into new tests, which just spreads poor practice. This commit removes all use of the 'then' keyword from the gdb.multi/ test script directory. There should be no changes in what is tested after this commit. 2022-11-28 Andrew Burgess gdb/testsuite: remove use of then keyword from gdb.fortran/*.exp The canonical form of 'if' in modern TCL is 'if {} {}'. But there's still a bunch of places in the testsuite where we make use of the 'then' keyword, and sometimes these get copies into new tests, which just spreads poor practice. This commit removes all use of the 'then' keyword from the gdb.fortran/ test script directory. There should be no changes in what is tested after this commit. 2022-11-28 Andrew Burgess gdb/testsuite: remove use of then keyword from gdb.disasm/*.exp The canonical form of 'if' in modern TCL is 'if {} {}'. But there's still a bunch of places in the testsuite where we make use of the 'then' keyword, and sometimes these get copies into new tests, which just spreads poor practice. This commit removes all use of the 'then' keyword from the gdb.disasm/ test script directory. There should be no changes in what is tested after this commit. 2022-11-28 Andrew Burgess gdb/testsuite: remove use of then keyword from gdb.reverse/*.exp The canonical form of 'if' in modern TCL is 'if {} {}'. But there's still a bunch of places in the testsuite where we make use of the 'then' keyword, and sometimes these get copies into new tests, which just spreads poor practice. This commit removes all use of the 'then' keyword from the gdb.reverse/ test script directory. There should be no changes in what is tested after this commit. 2022-11-28 Andrew Burgess gdb/testsuite: remove use of then keyword from gdb.trace/*.exp The canonical form of 'if' in modern TCL is 'if {} {}'. But there's still a bunch of places in the testsuite where we make use of the 'then' keyword, and sometimes these get copies into new tests, which just spreads poor practice. This commit removes all use of the 'then' keyword from the gdb.trace/ test script directory. There should be no changes in what is tested after this commit. 2022-11-28 Andrew Burgess gdb/testsuite: remove use of then keyword from gdb.threads/*.exp The canonical form of 'if' in modern TCL is 'if {} {}'. But there's still a bunch of places in the testsuite where we make use of the 'then' keyword, and sometimes these get copies into new tests, which just spreads poor practice. This commit removes all use of the 'then' keyword from the gdb.threads/ test script directory. There should be no changes in what is tested after this commit. 2022-11-28 Andrew Burgess gdb/testsuite: remove use of then keyword from gdb.python/*.exp The canonical form of 'if' in modern TCL is 'if {} {}'. But there's still a bunch of places in the testsuite where we make use of the 'then' keyword, and sometimes these get copies into new tests, which just spreads poor practice. This commit removes all use of the 'then' keyword from the gdb.python/ test script directory. There should be no changes in what is tested after this commit. 2022-11-28 Andrew Burgess gdb/testsuite: remove use of then keyword from gdb.cp/*.exp The canonical form of 'if' in modern TCL is 'if {} {}'. But there's still a bunch of places in the testsuite where we make use of the 'then' keyword, and sometimes these get copies into new tests, which just spreads poor practice. This commit removes all use of the 'then' keyword from the gdb.cp/ test script directory. There should be no changes in what is tested after this commit. 2022-11-28 Andrew Burgess gdb/testsuite: remove use of then keyword from gdb.arch/*.exp The canonical form of 'if' in modern TCL is 'if {} {}'. But there's still a bunch of places in the testsuite where we make use of the 'then' keyword, and sometimes these get copies into new tests, which just spreads poor practice. This commit removes all use of the 'then' keyword from the gdb.arch/ test script directory. There should be no changes in what is tested after this commit. 2022-11-28 Andrew Burgess gdb/testsuite: remove use of then keyword from gdb.base/*.exp The canonical form of 'if' in modern TCL is 'if {} {}'. But there's still a bunch of places in the testsuite where we make use of the 'then' keyword, and sometimes these get copies into new tests, which just spreads poor practice. This commit removes all use of the 'then' keyword from the gdb.base/ test script directory. There should be no changes in what is tested after this commit. 2022-11-28 Andrew Burgess gdb/testsuite: remove use of then keyword from gdb.ada/*.exp The canonical form of 'if' in modern TCL is 'if {} {}'. But there's still a bunch of places in the testsuite where we make use of the 'then' keyword, and sometimes these get copies into new tests, which just spreads poor practice. This commit removes all use of the 'then' keyword from the gdb.ada/ test script directory. There should be no changes in what is tested after this commit. 2022-11-28 Andrew Burgess gdb/testsuite: remove DOS line endings from a test script The gdb.fortran/nested-funcs.exp test script has DOS line endings. I can see no reason why this script needs DOS line endings. Convert to UNIX line endings. There should be no change in what is tested after this commit. 2022-11-28 Tom Tromey Don't let gdb_stdlog use pager When using the "set logging" commands, cli_interp_base::set_logging will send gdb_stdlog output (among others) to the tee it makes for gdb_stdout. However, this has the side effect of also causing logging to use the pager. This is PR gdb/29787. This patch fixes the problem by keeping stderr and stdlog separate from stdout, preserving the rule that only gdb_stdout should page. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29787 2022-11-28 Tom Tromey Don't let tee_file own a stream Right now, tee_file owns the second stream it writes to. This is done for the convenience of the users. In a subsequent patch, this will no longer be convenient, so this patch moves the responsibility for ownership to the users of tee_file. Remove 'saved_output' global CLI redirect uses a global variable, 'saved_output'. However, globals are generally bad, and there is no need for this one -- it can be a member of cli_interp_base. This patch makes this change. 2022-11-28 Hannes Domani Remove no longer used jump label The out label is unused since wait_for_debug_event is in a different thread. Actually set m_is_async to current async mode Looks like this was missed in the async mode implementation. 2022-11-28 Hannes Domani Don't use auto for lambda parameter Older gcc versions (here 4.9.2) can't handle auto for a lambda parameter: ../../gdb/windows-nat.c: In member function 'void windows_nat_target::delete_thread(ptid_t, DWORD, bool)': ../../gdb/windows-nat.c:629:12: error: use of 'auto' in lambda parameter declaration only available with -std=c++1y or -std=gnu++1y [-Werror] [=] (auto &th) ^ 2022-11-28 Hannes Domani Fix calling convention of thread entry point For i686 the CreateThread entry point function needs the WINAPI (stdcall) calling convention: ../../gdb/windows-nat.c: In constructor 'windows_nat_target::windows_nat_target()': ../../gdb/windows-nat.c:450:56: error: invalid user-defined conversion from 'windows_nat_target::windows_nat_target()::' to 'LPTHREAD_START_ROUTINE' {aka 'long unsigned int (__attribute__((stdcall)) *)(void*)'} [-fpermissive] 450 | HANDLE bg_thread = CreateThread (nullptr, 64 * 1024, fn, this, 0, nullptr); | ^~ ../../gdb/windows-nat.c:444:13: note: candidate is: 'constexpr windows_nat_target::windows_nat_target()::::operator DWORD (*)(LPVOID)() const' (near match) 444 | auto fn = [] (LPVOID self) -> DWORD | ^ ../../gdb/windows-nat.c:444:13: note: no known conversion from 'DWORD (*)(LPVOID)' {aka 'long unsigned int (*)(void*)'} to 'LPTHREAD_START_ROUTINE' {aka 'long unsigned int (__attribute__((stdcall)) *)(void*)'} Since it's not possible to change the calling convention of a lambda, I've moved it to a separate function. 2022-11-28 Andrew Burgess gdb: mark disassembler function callback types as noexcept In disasm.h we define a set of types that are used by the various disassembler classes to hold callback functions before passing the callbacks into libopcodes. Because libopcodes is C code, and on some (many?) targets, C code is compiled without exception support, it is important that GDB not try to throw an exception over libopcode code. In the previous commit all the existing callbacks were marked as noexcept, however, this doesn't protect us from a future change to GDB either adding a new callback that is not noexcept, or removing the noexcept keyword from an existing callback. In this commit I mark all the callback types as noexcept. This means that GDB's disassembler classes will no longer compile if we try to pass a callback that is not marked as noexcept. At least, that's the idea. Unfortunately, it's not that easy. Before C++17, the noexcept keyword on a function typedef would be ignored, thus: using func_type = void (*) (void) noexcept; void a_func () { throw 123; } void some_func (func_type f) { f (); } int main () { some_func (a_func); return 0; } Will compile just fine for C++11 and C++14 with GCC. Clang on the other hand complains that 'noexcept' should not appear on function types, but then does appear to correctly complain that passing a_func is a mismatch in the set of exceptions that could be thrown. Switching to C++17 and both GCC and Clang correctly point out that passing a_func is an invalid conversion relating to the noexcept keyword. Changing a_func to: void a_func () noexcept { /* Nothing. */ } And for C++17 both GCC and Clang compile this just fine. My conclusion then is that adding the noexcept keyword to the function types is pointless while GDB is not compiled as C++17, and silencing the warnings would require us to jump through a bunch of hoops. And so, in this commit, I define a macro LIBOPCODE_CALLBACK_NOEXCEPT, this macro expands to noexcept when compiling for C++17, but otherwise expands to nothing. I then add this macro to the function types. I've compiled GDB as the default C++11 and also forced the compile to C++17. When compiling as C++17 I spotted a few additional places where callbacks needed to be marked noexcept (these fixes were merged into the previous commit, but this confirmed to be that the macro is working as expected). 2022-11-28 Andrew Burgess gdb/disasm: mark functions passed to the disassembler noexcept While working on another patch, Simon pointed out that GDB could be improved by marking the functions passed to the disassembler as noexcept. https://sourceware.org/pipermail/gdb-patches/2022-October/193084.html The reason this is important is the on some hosts, libopcodes, being C code, will not be compiled with support for handling exceptions. As such, an attempt to throw an exception over libopcodes code will cause GDB to terminate. See bug gdb/29712 for an example of when this happened. In this commit all the functions that are passed to the disassembler, and which might be used as callbacks by libopcodes are marked noexcept. Ideally, I would have liked to change these typedefs: using read_memory_ftype = decltype (disassemble_info::read_memory_func); using memory_error_ftype = decltype (disassemble_info::memory_error_func); using print_address_ftype = decltype (disassemble_info::print_address_func); using fprintf_ftype = decltype (disassemble_info::fprintf_func); using fprintf_styled_ftype = decltype (disassemble_info::fprintf_styled_func); which are declared in disasm.h, as including the noexcept keyword. However, when I tried this, I ran into this warning/error: In file included from ../../src/gdb/disasm.c:25: ../../src/gdb/disasm.h: In constructor ‘gdb_printing_disassembler::gdb_printing_disassembler(gdbarch*, ui_file*, gdb_disassemble_info::read_memory_ftype, gdb_disassemble_info::memory_error_ftype, gdb_disassemble_info::print_address_ftype)’: ../../src/gdb/disasm.h:116:3: error: mangled name for ‘gdb_printing_disassembler::gdb_printing_disassembler(gdbarch*, ui_file*, gdb_disassemble_info::read_memory_ftype, gdb_disassemble_info::memory_error_ftype, gdb_disassemble_info::print_address_ftype)’ will change in C++17 because the exception specification is part of a function type [-Werror=noexcept-type] 116 | gdb_printing_disassembler (struct gdbarch *gdbarch, | ^~~~~~~~~~~~~~~~~~~~~~~~~ So I've left that change out. This does mean that if somebody adds a new use of the disassembler classes in the future, and forgets to mark the callbacks as noexcept, this will compile fine. We'll just have to manually check for that during review. 2022-11-28 Andrew Burgess gdb/python: avoid throwing an exception over libopcodes code Bug gdb/29712 identifies a problem with the Python disassembler API. In some cases GDB will try to throw an exception through the libopcodes disassembler code, however, not all targets include exception unwind information when compiling C code, for targets that don't include this information GDB will terminate when trying to pass the exception through libopcodes. To explain what GDB is trying to do, consider the following trivial use of the Python disassembler API: class ExampleDisassembler(gdb.disassembler.Disassembler): class MyInfo(gdb.disassembler.DisassembleInfo): def __init__(self, info): super().__init__(info) def read_memory(self, length, offset): return super().read_memory(length, offset) def __init__(self): super().__init__("ExampleDisassembler") def __call__(self, info): info = self.MyInfo(info) return gdb.disassembler.builtin_disassemble(info) This disassembler doesn't add any value, it defers back to GDB to do all the actual work, but it serves to allow us to discuss the problem. The problem occurs when a Python exception is raised by the MyInfo.read_memory method. The MyInfo.read_memory method is called from the C++ function gdbpy_disassembler::read_memory_func. The C++ stack at the point this function is called looks like this: #0 gdbpy_disassembler::read_memory_func (memaddr=4198805, buff=0x7fff9ab9d2a8 "\220ӹ\232\377\177", len=1, info=0x7fff9ab9d558) at ../../src/gdb/python/py-disasm.c:510 #1 0x000000000104ba06 in fetch_data (info=0x7fff9ab9d558, addr=0x7fff9ab9d2a9 "ӹ\232\377\177") at ../../src/opcodes/i386-dis.c:305 #2 0x000000000104badb in ckprefix (ins=0x7fff9ab9d100) at ../../src/opcodes/i386-dis.c:8571 #3 0x000000000104e28e in print_insn (pc=4198805, info=0x7fff9ab9d558, intel_syntax=-1) at ../../src/opcodes/i386-dis.c:9548 #4 0x000000000104f4d4 in print_insn_i386 (pc=4198805, info=0x7fff9ab9d558) at ../../src/opcodes/i386-dis.c:9949 #5 0x00000000004fa7ea in default_print_insn (memaddr=4198805, info=0x7fff9ab9d558) at ../../src/gdb/arch-utils.c:1033 #6 0x000000000094fe5e in i386_print_insn (pc=4198805, info=0x7fff9ab9d558) at ../../src/gdb/i386-tdep.c:4072 #7 0x0000000000503d49 in gdbarch_print_insn (gdbarch=0x5335560, vma=4198805, info=0x7fff9ab9d558) at ../../src/gdb/gdbarch.c:3351 #8 0x0000000000bcc8c6 in disasmpy_builtin_disassemble (self=0x7f2ab07f54d0, args=0x7f2ab0789790, kw=0x0) at ../../src/gdb/python/py-disasm.c:324 ### ... snip lots of frames as we pass through Python itself ... #22 0x0000000000bcd860 in gdbpy_print_insn (gdbarch=0x5335560, memaddr=0x401195, info=0x7fff9ab9e3c8) at ../../src/gdb/python/py-disasm.c:783 #23 0x00000000008995a5 in ext_lang_print_insn (gdbarch=0x5335560, address=0x401195, info=0x7fff9ab9e3c8) at ../../src/gdb/extension.c:939 #24 0x0000000000741aaa in gdb_print_insn_1 (gdbarch=0x5335560, vma=0x401195, info=0x7fff9ab9e3c8) at ../../src/gdb/disasm.c:1078 #25 0x0000000000741bab in gdb_disassembler::print_insn (this=0x7fff9ab9e3c0, memaddr=0x401195, branch_delay_insns=0x0) at ../../src/gdb/disasm.c:1101 So gdbpy_disassembler::read_memory_func is called from the libopcodes disassembler to read memory, this C++ function then calls into user supplied Python code to do the work. If the user supplied Python code raises an gdb.MemoryError exception indicating the memory read failed, this is fine. The C++ code converts this exception back into a return value that libopcodes can understand, and returns to libopcodes. However, if the user supplied Python code raises some other exception, what we want is for this exception to propagate through GDB and appear as if raised by the call to gdb.disassembler.builtin_disassemble. To achieve this, when gdbpy_disassembler::read_memory_func spots an unknown Python exception, we must pass the information about this exception from frame #0 to frame #8 in the above backtrace. Frame #8 is the C++ implementation of gdb.disassembler.builtin_disassemble, and so it is this function that we want to re-raise the unknown Python exception, so the user can, if they want, catch the exception in their code. The previous mechanism by which the exception was passed was to pack the details of the Python exception into a C++ exception, then throw the exception from frame #0, and catch the exception in frame #8, unpack the details of the Python exception, and re-raise it. However, this relies on the exception passing through frames #1 to #7, some of which are in libopcodes, which is C code, and so, might not be compiled with exception support. This commit proposes an alternative solution that does not rely on throwing a C++ exception. When we spot an unhandled Python exception in frame #0, we will store the details of this exception within the gdbpy_disassembler object currently in use. Then we return to libopcodes a value indicating that the memory_read failed. libopcodes will now continue to disassemble as though that memory read failed (with one special case described below), then, when we eventually return to disasmpy_builtin_disassemble we check to see if there is an exception stored in the gdbpy_disassembler object. If there is then this exception can immediately be installed, and then we return back to Python, when the user will be able to catch the exception. There is one extra change in gdbpy_disassembler::read_memory_func. After the first call that results in an exception being stored on the gdbpy_disassembler object, any future calls to the ::read_memory_func function will immediately return as if the read failed. This avoids any additional calls into user supplied Python code. My thinking here is that should the first call fail with some unknown error, GDB should not keep trying with any additional calls. This maintains the illusion that the exception raised from MyInfo.read_memory is immediately raised by gdb.disassembler.builtin_disassemble. I have no tests for this change though - to trigger this issue would rely on a libopcodes disassembler that will try to read further memory even after the first failed read. I'm not aware of any such disassembler that currently does this, but that doesn't mean such a disassembler couldn't exist in the future. With this change in place the gdb.python/py-disasm.exp test should now pass on AArch64. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29712 Approved-By: Simon Marchi 2022-11-28 Tom Tromey Remove reset_ecs and execution_control_state::reset I noticed that execution_control_state has a 'reset' method, and there's also a 'reset_ecs' function that calls it. This patch cleans this area up a little by adding a parameter to the constructor and (a change Simon suggested) removing the reset method. Some extraneous variables are also removed, like: - struct execution_control_state ecss; - struct execution_control_state *ecs = &ecss; Here 'ecs' is never changed, so this patch removes it entirely in favor of just using the object everywhere. Regression tested on x86-64 Fedora 34. Approved-By: Simon Marchi 2022-11-28 Andrew Burgess gdb: relax requirement for the map_failed stap probe to be present From glibc 2.35 and later, the "map_failed" stap probe is no longer included in glibc. The removal of the probe looks like an accident, but it was caused by a glibc commit which meant that the "map_failed" probe could no longer be reached; the compiler then helpfully optimised out the probe. In GDB, in solib-svr4.c, we have a list of probes that we look for related to the shared library loading detection. If any of these probes are missing then GDB will fall back to the non-probe based mechanism for detecting shared library loading. The "map_failed" probe is include in the list of required probes. This means that on glibc 2.35 (or later) systems, GDB is going to always fall back to the non-probes based mechanism for detecting shared library loading. I raised a glibc bug to discuss this issue: https://sourceware.org/bugzilla/show_bug.cgi?id=29818 But, whatever the ultimate decision from the glibc team, given there are version of glibc in the wild without the "map_failed" probe, we probably should update GDB to handle this situation. The "map_failed" probe is already a little strange, very early versions of glibc didn't include this probe, so, in some cases, if this probe is missing GDB is happy to ignore it. This is fine, the action associated with this probe inside GDB is DO_NOTHING, this means the probe isn't actually required in order for GDB to correctly detect the loading of shared libraries. In this commit I propose changing the rules so that any probe whose action is DO_NOTHING, is optional. There is one possible downside to this change, and that concerns 'set stop-on-solib-events on'. If a probe is removed from glibc, but the old style breakpoint based mechanism is still in place within glibc for that same event, then GDB will stop when using the old style non-probe based mechanism, but not when using the probes based mechanism. For the map_failed case this is not a problem, both the map_failed probe, and the call to the old style breakpoint location were optimised out, and so neither event (probes based, or breakpoint based) will trigger. This would only become an issue if glibc removed a probe, but left the breakpoint in place (this would almost certainly be a bug in glibc). For now, I'm proposing that we just don't worry about this. Because some probes have actions that are not DO_NOTHING, then we know the user will always seem _some_ stops when a shared library is loaded/unloaded, and (I'm guessing), in most cases, that's all they care about. I figure when someone complains then we can figure out what the right solution is then. With this commit in place, then, when using a glibc 2.35 or later system, GDB will once again use the stap probes for shared library detection. Reviewed-By: Lancelot SIX 2022-11-28 Tom de Vries [gdb/testsuite] Require hw watchpoint in gdb.ada/task_watch.exp On powerpc64le-linux I run into: ... (gdb) PASS: gdb.ada/task_watch.exp: info tasks before inserting breakpoint watch -location value task 3^M Watchpoint 2: -location value^M (gdb) PASS: gdb.ada/task_watch.exp: watch -location value task 3 continue^M Continuing.^M [Thread 0x7ffff7ccf170 (LWP 65550) exited]^M [Thread 0x7ffff7abf170 (LWP 65551) exited]^M FAIL: gdb.ada/task_watch.exp: continue to watchpoint (timeout) ... On x86_64-linux (where the test-case passes), a hardware watchpoint is used: ... (gdb) PASS: gdb.ada/task_watch.exp: info tasks before inserting breakpoint watch -location value task 3^M Hardware watchpoint 2: -location value^M ... and after forcing "set can-use-hw-watchpoints 0" we can intermittently reproduce the same failure. In the gdb documentation related to watchpoints in multi-threaded programs, we read: ... Warning: In multi-threaded programs, software watchpoints have only limited usefulness. If GDB creates a software watchpoint, it can only watch the value of an expression in a single thread. If you are confident that the expression can only change due to the current thread’s activity (and if you are also confident that no other thread can become current), then you can use software watchpoints as usual. However, GDB may not notice when a non-current thread’s activity changes the expression. (Hardware watchpoints, in contrast, watch an expression in all threads.) ... Since the ada task construct is mapped onto threads, it seems that the same limitation holds for tasks. Fix this by using skip_hw_watchpoint_tests. Tested on powerpc64-linux. Tested-By: Carl Love 2022-11-28 Tom de Vries [gdb/testsuite] Fix gdb.ada/out_of_line_in_inlined.exp for ppc64le On powerpc64le-linux, with test-case gdb.ada/out_of_line_in_inlined.exp I run into: ... (gdb) run ^M Starting program: foo_o224_021-all ^M ^M Breakpoint 1, 0x0000000010002f48 in foo_o224_021.child1.child2 (s=...) at \ foo_o224_021.adb:24^M 24 function Child2 (S : String) return Boolean is -- STOP^M (gdb) FAIL: gdb.ada/out_of_line_in_inlined.exp: scenario=all: \ run to foo_o224_021.child1.child2 ... The breakpoint is correctly set at the local entry point, and given that the local entry point doesn't correspond to a line number entry, the instruction address of the breakpoint is shown. The problem is that test-case doesn't expect the breakpoint address. Fix this by allowing the breakpoint address to occur. Tested on powerpc64le-linux. 2022-11-28 Michael Matz Only use wild_sort_fast there's no reason why the tree-based variant can't always be used when sorting is required, it merely needs to also support filename sorting and have a fast path for insertion at end (aka rightmost tree leaf). The filename sorting isn't tested anywhere and the only scripttempl that uses it is avr (for 'SORT(*)(.ctors)'), and I believe even there it was a mistake. Either way, this adds a testcase for filename sorting as well. Then the non-BST based sorting can be simplified to only support the fast case of no sorting required at all (at the same time renaming the two variants to _sort and _nosort). 2022-11-28 Michael Matz Special case more simple patterns fnmatch is slow, so avoiding it in more cases is good. This implements a more generic version of match_simple_wild which needs some pre-processing of patterns. In particular it supports patterns of the form PREFIX*SUFFIX (where all parts are optional), i.e. a super set of what's handled now. Most section matchers of this form and hence don't need any calls to fnmatch anymore. We retain the implementation of match_simple_wild for the filename matchers (they aren't called often enough to matter). 2022-11-28 Simon Marchi gdb/testsuite: fail if gdb_start_cmd fails I broke gdb.ada/start.exp, and did not notice it, because it outputs an UNTESTED if gdb_start_cmd fails. I don't really see when start would fail and it's not a problem that should be looked at. Change all spots that call untested after a gdb_start_cmd failure, use fail instead. Doing so caused some failures with the native-gdbserver board. Some tests that use "start" were relying on the fact that start would fail with that board to just return with "untested". Change them to add an early return if use_gdb_stub returns true. Some gdb.pascal tests also failed with native-gdbserver, because they did use gdb_start_cmd to start the inferior, for no good reason. Convert them to use runto_main instead, which does the right thing if the target is a stub. A further refactoring could be to make gdb_start_cmd match the expected breakpoint hit and the prompt, which it doesn't do currently (it leaves that to the callers, but not all of them do). Change-Id: I097370851213e798ff29fb6cf8ba25ef7d2be007 Reviewed-By: Bruno Larsen Approved-By: Andrew Burgess 2022-11-28 Tom Tromey Fix range type signed-ness heuristic The code to create a range type has a heuristic to decide whether the range is unsigned. However, this heuristic can fail if the upper bound of the range has its high bit set, because the test is done using LONGEST. With this patch, if the underlying type of a range is unsigned, then the range will always be unsigned. A new test is included. Regression tested on x86-64 Fedora 34. We've also been using this internally at AdaCore for a while. 2022-11-28 Simon Marchi gdb: disable commit resumed in target_kill New in this version: - Better comment in target_kill - Uncomment line in test to avoid hanging when exiting, when testing on native-extended-gdbserver PR 28275 shows that doing a sequence of: - Run inferior in background (run &) - kill that inferior - Run again We get into this assertion: /home/smarchi/src/binutils-gdb/gdb/target.c:2590: internal-error: target_wait: Assertion `!proc_target->commit_resumed_state' failed. #0 internal_error_loc (file=0x5606b344e740 "/home/smarchi/src/binutils-gdb/gdb/target.c", line=2590, fmt=0x5606b344d6a0 "%s: Assertion `%s' failed.") at /home/smarchi/src/binutils-gdb/gdbsupport/errors.cc:54 #1 0x00005606b6296475 in target_wait (ptid=..., status=0x7fffb9390630, options=...) at /home/smarchi/src/binutils-gdb/gdb/target.c:2590 #2 0x00005606b5767a98 in startup_inferior (proc_target=0x5606bfccb2a0 , pid=3884857, ntraps=1, last_waitstatus=0x0, last_ptid=0x0) at /home/smarchi/src/binutils-gdb/gdb/nat/fork-inferior.c:482 #3 0x00005606b4e6c9c5 in gdb_startup_inferior (pid=3884857, num_traps=1) at /home/smarchi/src/binutils-gdb/gdb/fork-child.c:132 #4 0x00005606b50f14a5 in inf_ptrace_target::create_inferior (this=0x5606bfccb2a0 , exec_file=0x604000039f50 "/home/smarchi/build/binutils-gdb/gdb/test", allargs="", env=0x61500000a580, from_tty=1) at /home/smarchi/src/binutils-gdb/gdb/inf-ptrace.c:105 #5 0x00005606b53b6d23 in linux_nat_target::create_inferior (this=0x5606bfccb2a0 , exec_file=0x604000039f50 "/home/smarchi/build/binutils-gdb/gdb/test", allargs="", env=0x61500000a580, from_tty=1) at /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:978 #6 0x00005606b512b79b in run_command_1 (args=0x0, from_tty=1, run_how=RUN_NORMAL) at /home/smarchi/src/binutils-gdb/gdb/infcmd.c:468 #7 0x00005606b512c236 in run_command (args=0x0, from_tty=1) at /home/smarchi/src/binutils-gdb/gdb/infcmd.c:526 When running the kill command, commit_resumed_state for the process_stratum_target (linux-nat, here) is true. After the kill, when there are no more threads, commit_resumed_state is still true, as nothing touches this flag during the kill operation. During the subsequent run command, run_command_1 does: scoped_disable_commit_resumed disable_commit_resumed ("running"); We would think that this would clear the commit_resumed_state flag of our native target, but that's not the case, because scoped_disable_commit_resumed iterates on non-exited inferiors in order to find active process targets. And after the kill, the inferior is exited, and the native target was unpushed from it anyway. So scoped_disable_commit_resumed doesn't touch the commit_resumed_state flag of the native target, it stays true. When reaching target_wait, in startup_inferior (to consume the initial expect stop events while the inferior is starting up and working its way through the shell), commit_resumed_state is true, breaking the contract saying that commit_resumed_state is always false when calling the targets' wait method. (note: to be correct, I think that startup_inferior should toggle commit_resumed between the target_wait and target_resume calls, but I'll ignore that for now) I can see multiple ways to fix this. In the end, we need commit_resumed_state to be cleared by the time we get to that target_wait. It could be done at the end of the kill command, or at the beginning of the run command. To keep things in a coherent state, I'd like to make it so that after the kill command, when the target is left with no threads, its commit_resumed_state flag is left to false. This way, we can keep working with the assumption that a target with no threads (and therefore no running threads) has commit_resumed_state == false. Do this by adding a scoped_disable_commit_resumed in target_kill. It clears the target's commit_resumed_state on entry, and leaves it false if the target does not have any resumed thread on exit. That means, even if the target has another inferior with stopped threads, commit_resumed_state will be left to false, which makes sense. Add a test that tries to cover various combinations of actions done while an inferior is running (and therefore while commit_resumed_state is true on the process target). Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28275 Change-Id: I8e6fe6dc1f475055921520e58cab68024039a1e9 Approved-By: Andrew Burgess 2022-11-28 Simon Marchi gdbserver: switch to right process in find_one_thread New in this version: add a dedicated test. When I do this: $ ./gdb -nx --data-directory=data-directory -q \ /bin/sleep \ -ex "maint set target-non-stop on" \ -ex "tar ext :1234" \ -ex "set remote exec-file /bin/sleep" \ -ex "run 1231 &" \ -ex add-inferior \ -ex "inferior 2" Reading symbols from /bin/sleep... (No debugging symbols found in /bin/sleep) Remote debugging using :1234 Starting program: /bin/sleep 1231 Reading /lib64/ld-linux-x86-64.so.2 from remote target... warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead. Reading /lib64/ld-linux-x86-64.so.2 from remote target... Reading /usr/lib/debug/.build-id/a6/7a1408f18db3576757eea210d07ba3fc560dff.debug from remote target... [New inferior 2] Added inferior 2 on connection 1 (extended-remote :1234) [Switching to inferior 2 [] ()] (gdb) Reading /lib/x86_64-linux-gnu/libc.so.6 from remote target... attach 3659848 Attaching to process 3659848 /home/smarchi/src/binutils-gdb/gdb/thread.c:85: internal-error: inferior_thread: Assertion `current_thread_ != nullptr' failed. Note the "attach" command just above. When doing it on the command-line with a -ex switch, the bug doesn't trigger. The internal error of GDB is actually caused by GDBserver crashing, and the error recovery of GDB is not on point. This patch aims to fix just the GDBserver crash, not the GDB problem. GDBserver crashes with a segfault here: (gdb) bt #0 0x00005555557fb3f4 in find_one_thread (ptid=...) at /home/smarchi/src/binutils-gdb/gdbserver/thread-db.cc:177 #1 0x00005555557fd5cf in thread_db_thread_handle (ptid=, handle=0x7fffffffc400, handle_len=0x7fffffffc3f0) at /home/smarchi/src/binutils-gdb/gdbserver/thread-db.cc:461 #2 0x000055555578a0b6 in linux_process_target::thread_handle (this=0x5555558a64c0 , ptid=, handle=0x7fffffffc400, handle_len=0x7fffffffc3f0) at /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:6905 #3 0x00005555556dfcc6 in handle_qxfer_threads_worker (thread=0x60b000000510, buffer=0x7fffffffc8a0) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:1645 #4 0x00005555556e00e6 in operator() (__closure=0x7fffffffc5e0, thread=0x60b000000510) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:1696 #5 0x00005555556f54be in for_each_thread >(struct {...}) (func=...) at /home/smarchi/src/binutils-gdb/gdbserver/gdbthread.h:159 #6 0x00005555556e0242 in handle_qxfer_threads_proper (buffer=0x7fffffffc8a0) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:1694 #7 0x00005555556e04ba in handle_qxfer_threads (annex=0x629000000213 "", readbuf=0x621000019100 '\276' ..., writebuf=0x0, offset=0, len=4097) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:1732 #8 0x00005555556e1989 in handle_qxfer (own_buf=0x629000000200 "qXfer:threads", packet_len=26, new_packet_len_p=0x7fffffffd630) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:2045 #9 0x00005555556e720a in handle_query (own_buf=0x629000000200 "qXfer:threads", packet_len=26, new_packet_len_p=0x7fffffffd630) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:2685 #10 0x00005555556f1a01 in process_serial_event () at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4176 #11 0x00005555556f4457 in handle_serial_event (err=0, client_data=0x0) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4514 #12 0x0000555555820f56 in handle_file_event (file_ptr=0x607000000250, ready_mask=1) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:573 #13 0x0000555555821895 in gdb_wait_for_event (block=1) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:694 #14 0x000055555581f533 in gdb_do_one_event (mstimeout=-1) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:264 #15 0x00005555556ec9fb in start_event_loop () at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:3512 #16 0x00005555556f0769 in captured_main (argc=4, argv=0x7fffffffe0d8) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:3992 #17 0x00005555556f0e3f in main (argc=4, argv=0x7fffffffe0d8) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4078 The reason is a wrong current process when find_one_thread is called. The current process is the 2nd one, which was just attached. It does not yet have thread_db data (proc->priv->thread_db is nullptr). As we iterate on all threads of all process to fulfull the qxfer:threads:read request, we get to a thread of process 1 for which we haven't read thread_db information yet (lwp_info::thread_known is false), so we get into find_one_thread. find_one_thread uses `current_process ()->priv->thread_db`, assuming the current process matches the ptid passed as a parameter, which is wrong. A segfault happens when trying to dereference that thread_db pointer. Fix this by making find_one_thread not assume what the current process / current thread is. If it needs to call into libthread_db, which we know will try to read memory from the current process, then temporarily set the current process. In the case where the thread is already know and we return early, we don't need to switch process. Add a test to reproduce this specific situation. Change-Id: I09b00883e8b73b7e5f89d0f47cb4e9c0f3d6caaa Approved-By: Andrew Burgess 2022-11-28 Tom Tromey Fix crash in "document" command PR cli/29800 points out that "document" will now crash when the argument is an undefined command. This is a regression due to the "document user-defined aliases" patch. Approved-By: Joel Brobecker Reviewed-By: Philippe Waroquiers Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29800 2022-11-28 Tom de Vries [gdb/testsuite] Fix gdb.opt/solib-intra-step.exp for powerpc64le On powerpc64le-linux, I run into: ... (gdb) PASS: gdb.opt/solib-intra-step.exp: first-hit step^M 28 { /* first-retry */^M (gdb) FAIL: gdb.opt/solib-intra-step.exp: second-hit ... It's a bit easier to understand what happens if we do a full stepping session: ... Temporary breakpoint 1, main () at solib-intra-step-main.c:23 23 shlib_first (); (gdb) step shlib_first () at solib-intra-step-lib.c:29 29 shlib_second (0); /* first-hit */ (gdb) step 28 { /* first-retry */ (gdb) step 29 shlib_second (0); /* first-hit */ (gdb) step shlib_second (dummy=0) at solib-intra-step-lib.c:23 23 abort (); /* second-hit */ ... and compare that to the line info: ... CU: solib-intra-step-lib.c: File name Line number Starting address View Stmt solib-intra-step-lib.c 22 0x710 x solib-intra-step-lib.c 23 0x724 x solib-intra-step-lib.c 28 0x740 x solib-intra-step-lib.c 29 0x74c x solib-intra-step-lib.c 28 0x750 x solib-intra-step-lib.c 29 0x758 x solib-intra-step-lib.c 30 0x760 x solib-intra-step-lib.c - 0x77c ... So we step from line 29 to line 28, and back to line 29, which is behaviour that matches the line table. The peculiar order is due to using optimization. The problem is that the test-case doesn't expect this order. Fix this by allowing this order in the test-case. Tested on powerpc64le-linux. PR testsuite/29792 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29792 2022-11-28 Andrew Burgess gdb: fix assert when quitting GDB while a thread is stepping This commit addresses one of the issues identified in PR gdb/28275. Bug gdb/28275 identifies a number of situations in which this assert: Assertion `!proc_target->commit_resumed_state' failed. could be triggered. There's actually a number of similar places where this assert is found in GDB, the two of interest in gdb/28275 are in target_wait and target_stop. In one of the comments: https://sourceware.org/bugzilla/show_bug.cgi?id=28275#c1 steps to trigger the assertion within target_stop were identified when using a modified version of the gdb.threads/detach-step-over.exp test script. In the gdb.threads/detach-step-over.exp test, we attach to a multi-threaded inferior, and continue the inferior in asynchronous (background) mode. Each thread is continuously hitting a conditional breakpoint where the condition is always false. While the inferior is running we detach. The goal is that we detach while GDB is performing a step-over for the conditional breakpoint in at least one thread. While detaching, if a step-over is in progress, then GDB has to complete the step over before we can detach. This involves calling target_stop and target_wait (see prepare_for_detach). As far as gdb/28275 is concerned, the interesting part here, is the the process_stratum_target::commit_resumed_state variable must be false when target_stop and target_wait are called. This is currently ensured because, in detach_command (infrun.c), we create an instance of scoped_disable_commit_resumed, this ensures that when target_detach is called, ::commit_resumed_state will be false. The modification to the test that I propose here, and which exposed the bug, is that, instead of using "detach" to detach from the inferior, we instead use "quit". Quitting GDB after attaching to an inferior will cause GDB to first detach, and then exit. When we quit GDB we end up calling target_detach via a different code path, the stack looks like: #0 target_detach #1 kill_or_detach #2 quit_force #3 quit_command Along this path there is no scoped_disable_commit_resumed created. ::commit_resumed_state can be true when we reach prepare_for_detach, which calls target_wait and target_stop, so the assertion will trigger. In this commit, I propose fixing this by adding the creation of a scoped_disable_commit_resumed into target_detach. This will ensure that ::commit_resumed_state is false when calling prepare_for_detach from within target_detach. I did consider placing the scoped_disable_commit_resumed in prepare_for_detach, however, placing it in target_detach ensures that the target's commit_resumed_state flag is left to false if the detached inferior was the last one for that target. It's the same rationale as for patch "gdb: disable commit resumed in target_kill" that comes later in this series, but for detach instead of kill. detach_command still includes a scoped_disable_commit_resumed too, but I think it is still relevant to cover the resumption at the end of the function. Co-Authored-By: Simon Marchi Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28275 Change-Id: Ie128f7aba6ef0e018859275eca372e6ea738e96f 2022-11-28 Andrew Burgess gdb/testsuite: refactor gdb.threads/detach-step-over.exp Factor out some bits of gdb.threads/detach-step-over.exp to procs in preparation to adding some new variations of the test. Rename the existing "test" proc and make it use proc_with_prefix. Co-Authored-By: Simon Marchi Change-Id: Ib4412545c81c8556029e0f7bfa9dd48d7a9f3189 2022-11-28 Simon Marchi gdb/testsuite: remove global declarations in gdb.threads/detach-step-over.exp Before doing further changes to this file, change to use the :: notation instead of declaring global variables with the `global` keyword. Change-Id: I72301fd8f4693fea61aac054ba17245a1f4442fb Approved-By: Andrew Burgess 2022-11-28 Tom de Vries [gdb/testsuite] Fix gdb.arch/altivec-regs.exp with gcc 4.8.5 On powerpc64le-linux, using gcc 4.8.5, I run into: ... (gdb) PASS: gdb.arch/altivec-regs.exp: next (1) next^M 11 c = vec_add (a, b);^M (gdb) PASS: gdb.arch/altivec-regs.exp: next (2) print/x a^M $67 = {0xfefefefe, 0xfefefefe, 0xfefefefe, 0xfefefefe}^M (gdb) FAIL: gdb.arch/altivec-regs.exp: print vector parameter a ... Looking at the disassembly and the debug info, it's clear why there's a FAIL. The debug info says that the variable can be found at some stack location, but the instructions don't seem to be writing there. We can work around this by marking variable a volatile. Likewise for b. Note that marking the variables as volatile doesn't change the location information. Tested on power64le-linux. 2022-11-28 Tom de Vries [gdb/tdep] Fix gdb.base/msym-bp-shl.exp for ppc64le With test-case gdb.base/msym-bp-shl.exp on powerpc64le-linux, I run into: ... (gdb) PASS: gdb.base/msym-bp-shl.exp: debug=0: before run: break foo info breakpoint^M Num Type Disp Enb Address What^M 1 breakpoint keep y ^M 1.1 y 0x00000000000008d4 ^M 1.2 y 0x0000000000000a34 crti.S:88^M (gdb) FAIL: gdb.base/msym-bp-shl.exp: debug=0: before run: info breakpoint ... The problem is that the prologue skipper walks from foo@plt at 0xa28 to 0xa34: ... 0000000000000a28 : a28: c0 ff ff 4b b 9e8 <__glink_PLTresolve> Disassembly of section .fini: 0000000000000a2c <_fini>: a2c: 02 00 4c 3c addis r2,r12,2 a30: d4 74 42 38 addi r2,r2,29908 a34: a6 02 08 7c mflr r0 ... This is caused by ppc_elfv2_elf_make_msymbol_special which marks foo@plt as having a local entry point, due to incorrectly accessing an asymbol struct using a (larger) elf_symbol_type. Fix this by simply ignoring artificial symbols in ppc_elfv2_elf_make_msymbol_special. Tested on powerpc64le. Approved-By: Ulrich Weigand Reviewed-By: Carl Love Tested-By: Carl Love PR tdep/29814 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29814 2022-11-28 Alan Modra PR10368, ISO 8859 mentioned as 7bit encoding in strings documentation PR 10368 * doc/binutils.texi (strings): Delete example of 7-bit encoding. Use bfd_rename_section in msp430.em * emultempl/msp430.em (add_region_prefix ): Use bfd_rename_section. * testsuite/ld-msp430-elf/msp430-tiny-rom.ld: Handle varian data and bss input sections. asan: pef: buffer overflow * pef.c (bfd_pef_parse_traceback_table): Correct size moved when stripping leading dot. regen gas/Makefile.in 2022-11-28 Tsukasa OI RISC-V: Allow merging 'H' extension Because riscv_merge_std_ext function did not merge the 'H' extension, linked executables lacked 'H' extension when multiple objects are merged. This issue is found while building OpenSBI with 'H' extension (resulting ELF files did not contain "h1p0" in "Tag_RISCV_arch" even if *all* linked object files contained it). This commit adds 'h' to standard_exts variable to merge 'H' extension. bfd/ChangeLog: * elfnn-riscv.c (riscv_merge_std_ext): Add 'H' extension merging. 2022-11-28 Tsukasa OI RISC-V: Better support for long instructions (tests) This commit tests both (assembler and disassembler) fixes of "Better support for long instructions". gas/ChangeLog: * testsuite/gas/riscv/insn.s: Add testcases such that big number handling is required and should be disassembled as long ".byte" sequence with correct instruction bits. * testsuite/gas/riscv/insn.d: Likewise. * testsuite/gas/riscv/insn-na.d: Likewise. * testsuite/gas/riscv/insn-dwarf.d: Likewise. 2022-11-28 Tsukasa OI RISC-V: Better support for long instructions (assembler) Commit bb996692bd96 ("RISC-V/gas: allow generating up to 176-bit instructions with .insn") tried to start supporting long instructions but it was insufficient. 1. It heavily depended on the bignum internals (radix of 2^16), 2. It generates "value conflicts with instruction length" even if a big number instruction encoding does not exceed its expected length and 3. Because long opcode was handled separately (from struct riscv_cl_insn), some information like DWARF line number correspondence was missing. To resolve these problems, this commit: 1. Handles bignum (and its encodings) precisely and 2. Incorporates long opcode handling into regular instruction handling. This commit will be tested on the separate commit. gas/ChangeLog: * config/tc-riscv.c (struct riscv_cl_insn): Add long opcode field. (create_insn) Clear long opcode marker. (install_insn) Install longer opcode as well. (s_riscv_insn) Likewise. (riscv_ip_hardcode): Make big number handling stricter. Length and the value conflicts only if the bignum size exceeds the expected maximum length. 2022-11-28 Tsukasa OI RISC-V: Better support for long instructions (disassembler) Commit bb996692bd96 ("RISC-V/gas: allow generating up to 176-bit instructions with .insn") tried to start supporting long instructions but it was insufficient. On the disassembler, correct ".byte" output was limited to the first 64-bits of an instruction. After that, zeroes are incorrectly printed. Note that, it only happens on ".byte" output (instruction part) and not on hexdump (data) part. For example, before this commit, hexdump and ".byte" produces different values: Assembly: .insn 22, 0xfedcba98765432100123456789abcdef55aa33cc607f objdump output example (before the fix): 10: 607f 33cc 55aa cdef .byte 0x7f, 0x60, 0xcc, 0x33, 0xaa, 0x55, 0xef, 0xcd, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 18: 89ab 4567 0123 3210 20: 7654 ba98 fedc Note that, after 0xcd (after first 64-bits of the target instruction), all ".byte" values are incorrectly printed as zero while hexdump prints correct instruction bits. To resolve this, this commit adds "packet" argument to support dumping instructions longer than 64-bits (to print correct instruction bits on ".byte"). This commit will be tested on the separate commit. Assembly: .insn 22, 0xfedcba98765432100123456789abcdef55aa33cc607f objdump output example (after the fix): 10: 607f 33cc 55aa cdef .byte 0x7f, 0x60, 0xcc, 0x33, 0xaa, 0x55, 0xef, 0xcd, 0xab, 0x89, 0x67, 0x45, 0x23, 0x01, 0x10, 0x32, 0x54, 0x76, 0x98, 0xba, 0xdc, 0xfe 18: 89ab 4567 0123 3210 20: 7654 ba98 fedc opcodes/ChangeLog: * riscv-dis.c (riscv_disassemble_insn): Print unknown instruction using the new argument packet. (riscv_disassemble_data): Add unused argument packet. (print_insn_riscv): Pass packet to the disassemble function. 2022-11-28 GDB Administrator Automatic date update in version.in 2022-11-27 Philippe Waroquiers Fix leak in the dwarf reader Valgrind reports a leak in the dwarf reader (see details below). The function dw2_get_file_names_reader is interning in the per_objfile all the file names it finds, except the name of 'fnd file name and directory'. Instead, it was xstrdup-ing the name. Fix the leaks by also interning the name. This was validated running the tests natively, and under valgrind. Leaks have decreased as mentionned below. Valgrind detected no error such as double free or use after free. Stack trace of the leak: ==4113266== 490,735 bytes in 17,500 blocks are definitely lost in loss record 7,061 of 7,074 ==4113266== at 0x483979B: malloc (vg_replace_malloc.c:393) ==4113266== by 0x25A454: xmalloc (alloc.c:57) ==4113266== by 0x7D1E1E: xstrdup (xstrdup.c:34) ==4113266== by 0x39D141: dw2_get_file_names_reader (read.c:2825) ==4113266== by 0x39D141: dw2_get_file_names(dwarf2_per_cu_data*, dwarf2_per_objfile*) (read.c:2851) ==4113266== by 0x39DD6C: dw_expand_symtabs_matching_file_matcher(dwarf2_per_objfile*, gdb::function_view) (read.c:4149) ==4113266== by 0x3BC8B5: cooked_index_functions::expand_symtabs_matching(objfile*, gdb::function_view, lookup_name_info const*, gdb::function_view, gdb::function_view, enum_flags, domain_enum, search_domain) (read.c:18688) ==4113266== by 0x5DD1EA: objfile::map_symtabs_matching_filename(char const*, char const*, gdb::function_view) (symfile-debug.c:207) ==4113266== by 0x5F04CC: iterate_over_symtabs(char const*, gdb::function_view) (symtab.c:633) ==4113266== by 0x477EE3: collect_symtabs_from_filename(char const*, program_space*) (linespec.c:3712) ==4113266== by 0x477FC1: symtabs_from_filename(char const*, program_space*) (linespec.c:3726) ==4113266== by 0x47A9B8: convert_explicit_location_spec_to_linespec(linespec_state*, linespec*, char const*, char const*, symbol_name_match_type, char const*, line_offset) (linespec.c:2329) ==4113266== by 0x47E86E: convert_explicit_location_spec_to_sals (linespec.c:2388) ==4113266== by 0x47E86E: location_spec_to_sals(linespec_parser*, location_spec const*) (linespec.c:3104) ==4113266== by 0x47EDAC: decode_line_full(location_spec*, int, program_space*, symtab*, int, linespec_result*, char const*, char const*) (linespec.c:3149) ... Without the fix, the top 10 leaks are: ./gdb/testsuite/outputs/gdb.base/condbreak-bad/gdb.log:345:==3213924== definitely lost: 130,937 bytes in 5,409 blocks ./gdb/testsuite/outputs/gdb.base/hbreak2/gdb.log:619:==3758919== definitely lost: 173,323 bytes in 7,204 blocks ./gdb/testsuite/outputs/gdb.mi/mi-var-cp/gdb.log:1320:==4152873== definitely lost: 172,826 bytes in 7,207 blocks ./gdb/testsuite/outputs/gdb.base/advance-until-multiple-locations/gdb.log:398:==2992643== definitely lost: 172,965 bytes in 7,211 blocks ./gdb/testsuite/outputs/gdb.mi/mi-var-cmd/gdb.log:2302:==4159476== definitely lost: 173,129 bytes in 7,211 blocks ./gdb/testsuite/outputs/gdb.cp/gdb2384/gdb.log:222:==3811851== definitely lost: 218,106 bytes in 7,761 blocks ./gdb/testsuite/outputs/gdb.cp/mb-templates/gdb.log:310:==3787344== definitely lost: 290,311 bytes in 10,340 blocks ./gdb/testsuite/outputs/gdb.mi/mi-var-rtti/gdb.log:2568:==4158350== definitely lost: 435,427 bytes in 15,507 blocks ./gdb/testsuite/outputs/gdb.mi/mi-catch-cpp-exceptions/gdb.log:1704:==4119722== definitely lost: 435,405 bytes in 15,510 blocks ./gdb/testsuite/outputs/gdb.mi/mi-vla-fortran/gdb.log:768:==4113266== definitely lost: 508,585 bytes in 18,109 blocks With the fix: ./gdb/testsuite/outputs/gdb.base/fork-running-state/gdb.log:1536:==2924193== indirectly lost: 13,848 bytes in 98 blocks ./gdb/testsuite/outputs/gdb.base/fork-running-state/gdb.log:1675:==2928777== indirectly lost: 13,848 bytes in 98 blocks ./gdb/testsuite/outputs/gdb.python/py-inferior-leak/gdb.log:4729:==3353335== definitely lost: 3,360 bytes in 140 blocks ./gdb/testsuite/outputs/gdb.base/kill-detach-inferiors-cmd/gdb.log:210:==2746927== indirectly lost: 13,246 bytes in 154 blocks ./gdb/testsuite/outputs/gdb.base/inferior-clone/gdb.log:179:==3034984== indirectly lost: 12,921 bytes in 161 blocks ./gdb/testsuite/outputs/gdb.base/interrupt-daemon/gdb.log:209:==3006248== indirectly lost: 20,683 bytes in 174 blocks ./gdb/testsuite/outputs/gdb.threads/watchpoint-fork/gdb.log:714:==3512403== indirectly lost: 20,707 bytes in 175 blocks ./gdb/testsuite/outputs/gdb.threads/watchpoint-fork/gdb.log:962:==3514498== indirectly lost: 20,851 bytes in 178 blocks ./gdb/testsuite/outputs/gdb.base/multi-forks/gdb.log:336:==2585839== indirectly lost: 53,630 bytes in 386 blocks ./gdb/testsuite/outputs/gdb.base/multi-forks/gdb.log:1338:==2592417== indirectly lost: 100,008 bytes in 1,154 blocks Approved-By: Simon Marchi 2022-11-27 Philippe Waroquiers fix leak in gdb_environ valgrind reports a leak when assigning a gdb_environ to another gdb_environ. The memory allocated for the target gdb_environ env variables is not released. The gdb_environ selftest reproduces the leak (see below). Fix the leak by clearing the target gdb_environ before std::move-ing the members. Tested natively and re-running all tests under valgrind. ==3261873== 4,842 bytes in 69 blocks are definitely lost in loss record 6,772 of 6,839 ==3261873== at 0x483979B: malloc (vg_replace_malloc.c:393) ==3261873== by 0x25A454: xmalloc (alloc.c:57) ==3261873== by 0x7D1E4E: xstrdup (xstrdup.c:34) ==3261873== by 0x7E2A51: gdb_environ::from_host_environ() (environ.cc:56) ==3261873== by 0x66F1C8: test_reinit_from_host_environ (environ-selftests.c:78) ==3261873== by 0x66F1C8: selftests::gdb_environ_tests::run_tests() (environ-selftests.c:285) ==3261873== by 0x7EFC43: operator() (std_function.h:622) = Approved-By: Simon Marchi 2022-11-27 Philippe Waroquiers Use false/true for some inferior class members instead of 0/1 Some class members were changed to bool, but there was still some assignments or comparisons using 0/1. Approved-By: Simon Marchi 2022-11-27 Tom de Vries [gdb/server] Emit warning for SIGINT failure Consider the executable from test-case gdb.base/interrupt-daemon.exp. When starting it using gdbserver: ... $ ./build/gdbserver/gdbserver localhost:2345 \ ./outputs/gdb.base/interrupt-daemon/interrupt-daemon ... and connecting to it using gdb: ... $ gdb -q -ex "target remote localhost:2345" \ -ex "set follow-fork-mode child" \ -ex "break daemon_main" -ex cont ... we are setup to do the same as in the test-case: interrupt a running inferior using ^C. So let's try: ... (gdb) continue Continuing. ^C ... After pressing ^C, nothing happens. This a known problem, filed as PR remote/18772. The problem is that in linux_process_target::request_interrupt, a kill is used to send a SIGINT, but it fails. And it fails silently. Make the failure verbose by adding a warning, such that the gdbserver output becomes more helpful: ... Process interrupt-daemon created; pid = 15068 Listening on port 2345 Remote debugging from host ::1, port 35148 Detaching from process 15068 Detaching from process 15085 gdbserver: Sending SIGINT to process group of pid 15068 failed: \ No such process ... Note that the failure can easily be reproduced using the test-case and target board native-gdbserver: ... (gdb) continue^M Continuing.^M PASS: gdb.base/interrupt-daemon.exp: fg: continue ^CFAIL: gdb.base/interrupt-daemon.exp: fg: ctrl-c stops process (timeout) ... as reported in PR server/23382. Tested on x86_64-linux. Approved-By: Simon Marchi 2022-11-27 GDB Administrator Automatic date update in version.in 2022-11-26 Tom de Vries [gdb/testsuite] Don't generate core in gdb.base/bt-on-fatal-signal.exp When running test-case gdb.base/bt-on-fatal-signal.exp on powerpc64le-linux I noticed: ... FAIL: gdb.base/bt-on-fatal-signal.exp: SEGV: scan for backtrace (timeout) ... The timeout is 10 seconds, but generating the core file takes more than a minute, probably due to slow NFS. I managed to reproduce this behaviour independently of gdb, by compiling "int main (void) { __builtin_abort (); }" and running it, which took 1.5 seconds for a core file 50 times smaller than the one for gdb. Fix this by preventing the core file from being generated, using a wrapper around gdb that does "ulimit -c 0". Tested on x86_64-linux. 2022-11-26 Tom de Vries [gdb/symtab] Handle failure to open .gnu_debugaltlink file If we instrument cc-with-tweaks.sh to remove the .gnu_debugaltlink file after dwz has created it, with test-case gdb.threads/access-mem-running-thread-exit.exp and target board cc-with-dwz-m we run into: ... (gdb) file access-mem-running-thread-exit^M Reading symbols from access-mem-running-thread-exit...^M could not find '.gnu_debugaltlink' file for access-mem-running-thread-exit^M ... followed a bit later by: ... (gdb) file access-mem-running-thread-exit^M Reading symbols from access-mem-running-thread-exit...^M gdb/dwarf2/read.c:7284: internal-error: create_all_units: \ Assertion `per_objfile->per_bfd->all_units.empty ()' failed.^M ... The problem is that create_units does not catch the error thrown by dwarf2_get_dwz_file. Fix this by catching the error and performing the necessary cleanup, getting the same result for the first and second file command. PR symtab/29805 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29805 2022-11-26 Philippe Waroquiers Fix jump on uninit producer_is_clang bit of cu.h dwarf2_cu struct. Valgrind reports a "jump on unitialised bit error" when running e.g. gdb.base/macro-source-path.exp (see details below). Fix this by initializing producer_is_clang member variable of dwarf2_cu. Tested on amd64/debian11 and re-running gdb.base/macro-source-path.exp under valgrind. ==2140965== Conditional jump or move depends on uninitialised value(s) ==2140965== at 0x5211F7: dwarf_decode_macro_bytes(dwarf2_per_objfile*, buildsym_compunit*, bfd*, unsigned char const*, unsigned char const*, macro_source_file*, line_header const*, dwarf2_section_info const*, int, int, unsigned int, dwarf2_section_info*, dwarf2_section_info*, gdb::optional, htab*, dwarf2_cu*) (macro.c:676) ==2140965== by 0x52158A: dwarf_decode_macros(dwarf2_per_objfile*, buildsym_compunit*, dwarf2_section_info const*, line_header const*, unsigned int, unsigned int, dwarf2_section_info*, dwarf2_section_info*, gdb::optional, int, dwarf2_cu*) (macro.c:967) ==2140965== by 0x523BC4: dwarf_decode_macros(dwarf2_cu*, unsigned int, int) (read.c:23379) ==2140965== by 0x552AB5: read_file_scope(die_info*, dwarf2_cu*) (read.c:9687) ==2140965== by 0x54F7B2: process_die(die_info*, dwarf2_cu*) (read.c:8660) ==2140965== by 0x5569C7: process_full_comp_unit (read.c:8429) ==2140965== by 0x5569C7: process_queue (read.c:7675) ==2140965== by 0x5569C7: dw2_do_instantiate_symtab (read.c:2063) ==2140965== by 0x5569C7: dw2_instantiate_symtab(dwarf2_per_cu_data*, dwarf2_per_objfile*, bool) (read.c:2085) ==2140965== by 0x55700B: dw2_expand_symtabs_matching_one(dwarf2_per_cu_data*, dwarf2_per_objfile*, gdb::function_view, gdb::function_view) (read.c:3984) ==2140965== by 0x557EA3: cooked_index_functions::expand_symtabs_matching(objfile*, gdb::function_view, lookup_name_info const*, gdb::function_view, gdb::function_view, enum_flags, domain_enum, search_domain) (read.c:18781) ==2140965== by 0x778977: objfile::lookup_symbol(block_enum, char const*, domain_enum) (symfile-debug.c:276) .... ==2140965== Uninitialised value was created by a heap allocation ==2140965== at 0x4839F01: operator new(unsigned long) (vg_replace_malloc.c:434) ==2140965== by 0x533A64: cutu_reader::cutu_reader(dwarf2_per_cu_data*, dwarf2_per_objfile*, abbrev_table*, dwarf2_cu*, bool, abbrev_cache*) (read.c:6264) ==2140965== by 0x5340C2: load_full_comp_unit(dwarf2_per_cu_data*, dwarf2_per_objfile*, dwarf2_cu*, bool, language) (read.c:7729) ==2140965== by 0x548338: load_cu(dwarf2_per_cu_data*, dwarf2_per_objfile*, bool) (read.c:2021) ==2140965== by 0x55634C: dw2_do_instantiate_symtab (read.c:2048) ==2140965== by 0x55634C: dw2_instantiate_symtab(dwarf2_per_cu_data*, dwarf2_per_objfile*, bool) (read.c:2085) ==2140965== by 0x55700B: dw2_expand_symtabs_matching_one(dwarf2_per_cu_data*, dwarf2_per_objfile*, gdb::function_view, gdb::function_view) (read.c:3984) ==2140965== by 0x557EA3: cooked_index_functions::expand_symtabs_matching(objfile*, gdb::function_view, lookup_name_info const*, gdb::function_view, gdb::function_view, enum_flags, domain_enum, search_domain) (read.c:18781) ==2140965== by 0x778977: objfile::lookup_symbol(block_enum, char const*, domain_enum) (symfile-debug.c:276) .... 2022-11-26 Philippe Waroquiers remove the declared but undefined/unused method find_partial_die The method struct partial_die_info *find_partial_die (sect_offset sect_off); in cu.h is defined, but is used nowhere and not implemented. 2022-11-26 GDB Administrator Automatic date update in version.in 2022-11-25 Martin Liska Revert "readelf: Do not require EI_OSABI for IFUNC." This reverts commit ffbbab0b3a1000f862b6d4ce3d9a76ed14f08801. 2022-11-25 Christoph Müllner riscv: Add AIA extension support (Smaia, Ssaia) This commit adds the AIA extensions (Smaia and Ssaia) CSRs. bfd/ChangeLog: * elfxx-riscv.c: Add 'smaia' and 'ssaia' to the list of known standard extensions. gas/ChangeLog: * config/tc-riscv.c (enum riscv_csr_class): (riscv_csr_address): Add CSR classes for Smaia/Ssaia. * testsuite/gas/riscv/csr-dw-regnums.d: Add new CSRs. * testsuite/gas/riscv/csr-dw-regnums.s: Likewise. * testsuite/gas/riscv/csr-version-1p10.d: Likewise. * testsuite/gas/riscv/csr-version-1p10.l: Likewise. * testsuite/gas/riscv/csr-version-1p11.d: Likewise. * testsuite/gas/riscv/csr-version-1p11.l: Likewise. * testsuite/gas/riscv/csr-version-1p12.d: Likewise. * testsuite/gas/riscv/csr-version-1p12.l: Likewise. * testsuite/gas/riscv/csr-version-1p9p1.d: Likewise. * testsuite/gas/riscv/csr-version-1p9p1.l: Likewise. * testsuite/gas/riscv/csr.s: Likewise. include/ChangeLog: * opcode/riscv-opc.h (CSR_MISELECT): New CSR macro. (CSR_MIREG): Likewise. (CSR_MTOPEI): Likewise. (CSR_MTOPI): Likewise. (CSR_MVIEN): Likewise. (CSR_MVIP): Likewise. (CSR_MIDELEGH): Likewise. (CSR_MIEH): Likewise. (CSR_MVIENH): Likewise. (CSR_MVIPH): Likewise. (CSR_MIPH): Likewise. (CSR_SISELECT): Likewise. (CSR_SIREG): Likewise. (CSR_STOPEI): Likewise. (CSR_STOPI): Likewise. (CSR_SIEH): Likewise. (CSR_SIPH): Likewise. (CSR_HVIEN): Likewise. (CSR_HVICTL): Likewise. (CSR_HVIPRIO1): Likewise. (CSR_HVIPRIO2): Likewise. (CSR_VSISELECT): Likewise. (CSR_VSIREG): Likewise. (CSR_VSTOPEI): Likewise. (CSR_VSTOPI): Likewise. (CSR_HIDELEGH): Likewise. (CSR_HVIENH): Likewise. (CSR_HVIPH): Likewise. (CSR_HVIPRIO1H): Likewise. (CSR_HVIPRIO2H): Likewise. (CSR_VSIEH): Likewise. (CSR_VSIPH): Likewise. (DECLARE_CSR): Add CSRs for Smaia and Ssaia. Changes for v3: - Imply ssaia for smaia - Imply zicsr for ssaia (and transitively smaia) - Move hypervisor CSRs to Ssaia+H - Rebase on upstream/master Changes for v2: - Add hypervisor and VS CSRs - Fix whitespace issue 2022-11-25 GDB Administrator Automatic date update in version.in 2022-11-24 Indu Bhagat sframe/doc: remove usage of xrefautomaticsectiontitle xrefautomaticsectiontitle appears to be available from texinfo 5.0 or greater. As such, it is not worthwhile to add requirement for a minimum necessary makeinfo version. So remove the usage of it. Also align node name with section title where possible. ChangeLog: * libsframe/doc/sframe-spec.texi: Remove usage of xrefautomaticsectiontitle. 2022-11-24 Andrew Burgess gdb: fix typo in debug output message Spotted a minor type, a missing ')', in a debug message. 2022-11-24 Simon Marchi gdb/testsuite/gdb.base/break.exp: split test_break Move all the remaining tests to a single test_break proc. It's a bit big, but all of these are kind of tied together. The procs starts by setting breakpoints, checks that we can see them in "info breakpoints", and tries stopping on them. Move all the "set bp_locationX" calls together at the top. Change-Id: Id05f98957e1a3462532d2dbd577cd0a7c7263900 Approved-By: Kevin Buettner 2022-11-24 Simon Marchi gdb/testsuite/gdb.base/break.exp: split test_tbreak Leave setting bp_location11 in the global scope, so that it's accessible to other procs. Change-Id: I8928f01640d3a1e993649b2168b9eda0724ee1d9 Approved-By: Kevin Buettner 2022-11-24 Simon Marchi gdb/testsuite/gdb.base/break.exp: split test_no_break_on_catchpoint Change-Id: Ifa7070943f1de22c2839fedf5f346d6591bb5a76 Approved-By: Kevin Buettner gdb/testsuite/gdb.base/break.exp: split test_break_nonexistent_line Change-Id: I4390dd5da23bae83ccc513ad0de0169ddff7df12 Approved-By: Kevin Buettner 2022-11-24 Simon Marchi gdb/testsuite/gdb.base/break.exp: split test_break_default One special thing here is that the part just above this one, that sets catchpoints and verifies they are not hit, requires that we resume execution to verify that the catchpoints are indeed not hit. I guess it was previously achieved by the until command, but it doesn't happen now that the until is moved into test_break_default. Add a gdb_continue_to_end after setting the catchpoints. If any catchpoint were to be hit, it would catch the problem. Change-Id: I5d4b43da91886b1beda9f6e56b05aa04331a9c05 Approved-By: Kevin Buettner 2022-11-24 Simon Marchi gdb/testsuite/gdb.base/break.exp: split test_break_silent_and_more This one is a bit tricky. The clear tests seem to depend on the various breakpoints that have been set before, starting with the "silent" breakpoints. So, move all this in a single chunk, it can always be split later if needed. Change-Id: I7ba61a5b130ade63eda0c4790534840339f8a72f Approved-By: Kevin Buettner 2022-11-24 Simon Marchi gdb/testsuite/gdb.base/break.exp: split test_break_line_convenience_var Change-Id: I593002373da971a0a4d6b5355d3fe321873479ab Approved-By: Kevin Buettner gdb/testsuite/gdb.base/break.exp: split test_break_user_call Change-Id: I9151ce9db9435722b758f41c6606b461bf15f320 Approved-By: Kevin Buettner gdb/testsuite/gdb.base/break.exp: split test_finish_arguments Change-Id: Id84babed1eeb3ce7d14b94ff332795964e8ead51 Approved-By: Kevin Buettner 2022-11-24 Simon Marchi gdb/testsuite/gdb.base/break.exp: use proc_with_prefix for test_next_with_recursion This one is already in a proc, just make the proc use proc_with_prefix, for consistency. Change-Id: I313ecf5097ff04526c29396529baeba84e37df5a Approved-By: Kevin Buettner 2022-11-24 Simon Marchi gdb/testsuite/gdb.base/break.exp: split test_break_optimized_prologue Change-Id: Ibf17033c8ce72aa5cfe1b739be2902e84a5e945d Approved-By: Kevin Buettner gdb/testsuite/gdb.base/break.exp: split test_rbreak_shlib Change-Id: I130e8914c2713095aab03e84aba1481b4c7af978 Approved-By: Kevin Buettner gdb/testsuite/gdb.base/break.exp: split test_break_file_line_convenience_var Change-Id: I0c31b037669b2917e062bf431372fb6531f8f53c Approved-By: Kevin Buettner gdb/testsuite/gdb.base/break.exp: split test_break_commands_clear Change-Id: Ia58f90117d52fc419fc494836d9b4ed5d902fe9b Approved-By: Kevin Buettner 2022-11-24 Nick Clifton Impport libiberty commit: 885b6660c17f from gcc mainline. Fix gas's acinclude.m4 to stop a potwntial configure time warning message. 2022-11-24 Martin Liska readelf: Do not require EI_OSABI for IFUNC. PR 29718 binutils/ChangeLog: * readelf.c (get_symbol_type): Consider STT_GNU_IFUNC as reserved name. 2022-11-24 Jan Beulich x86: widen applicability and use of CheckRegSize First of all make operand_type_register_match() apply to all sized operands, i.e. in Intel Syntax also to respective memory ones. This addresses gas wrongly accepting certain SIMD insns where register and memory operand sizes should match but don't. This apparently has affected all templates with one memory-only operand and one or more register ones, both permitting at least two sizes, due to CheckRegSize not taking effect. Then also add CheckRegSize to a couple of non-SIMD templates matching that same pattern of memory-only vs register operands. This replaces bogus (for Intel Syntax) diagnostics referring to a wrong suffix (when none was used at all) by "type mismatch" ones, just like already emitted for insns where the template allows a register operand alongside a memory one at any particular position. This also is a prereq to limiting (ideally eliminating in the long run) suffix "derivation" in Intel Syntax mode. While making the code adjustment also flip order of checks to do the cheaper one first in both cases. 2022-11-24 Jan Beulich x86: add missing CheckRegSize To properly and predictably determine operand size encoding (operand size or REX.W prefixes), consistent operand sizes need to be specified. Add CheckRegSize where this was previously missing. x86: correct handling of LAR and LSL Both uniformly only ever take 16-bit memory operands while at the same time requiring matching (in size) register operands, which then also should disassemble that way. This in particular requires splitting each of the templates for the assembler and separating decode of the register and memory forms in the disassembler. 2022-11-24 Alan Modra Tidy objdump printing of section size * objdump.c (load_specific_debug_section): Use PRIx64 format. Constify nm format array * nm.c (formats, format): Make const. 2022-11-24 Alan Modra PR16995, m68k coldfire emac immediate to macsr incorrect disassembly Mode/reg bits for these insns are 000 Dy, 001 Ay, and 111 100 for the move immediate. * m68k-opc.c (m68k_opcodes): Only accept 000 and 001 as mode for move reg to macsr/mask insns. 2022-11-24 Mark Harmstone gas: Disable --gcodeview on PE targets with no O_secrel 2022-11-24 GDB Administrator Automatic date update in version.in 2022-11-23 Torbjörn SVENSSON gdb/arm: Include FType bit in EXC_RETURN pattern on v8m For v8m, the EXC_RETURN pattern, without security extension, consists of FType, Mode and SPSEL. These are the same bits that are used in v7m. This patch extends the list of patterns to include also the FType bit and not just Mode and SPSEL bits for v8m targets without security extension. 2022-11-23 Alan Modra regen POTFILES.in 2022-11-23 Alan Modra PR22509 - Null pointer dereference on coff_slurp_reloc_table This extends the commit 4581a1c7d304 fix to more targets, which hardens BFD a little. I think the real underlying problem was the bfd_canonicalize_reloc call in load_specific_debug_section which passed a NULL for "symbols". Fix that too. PR 22509 bfd/ * aoutx.h (swap_ext_reloc_out): Gracefully handle NULL symbols. * i386lynx.c (swap_ext_reloc_out): Likewise. * pdp11.c (pdp11_aout_swap_reloc_out): Likewise. * coff-tic30.c (reloc_processing): Likewise. * coff-tic4x.c (tic4x_reloc_processing): Likewise. * coff-tic54x.c (tic54x_reloc_processing): Likewise. * coff-z80.c (reloc_processing): Likewise. * coff-z8k.c (reloc_processing): Likewise. * ecoff.c (ecoff_slurp_reloc_table): Likewise. * som.c (som_set_reloc_info): Likewise. binutils/ * objdump.c (load_specific_debug_section): Pass syms to bfd_canonicalize_reloc. 2022-11-23 Alan Modra asan: NULL deref in filter_symbols If tdata->symbols is NULL, make tdata->symcount zero too. This makes wasm_get_symtab_upper_bound return the proper result and stops cascading errors. * wasm-module.c (wasm_scan_name_function_section): Clear tdata->symcount on error. 2022-11-23 Luis Machado Document the memory_tagged argument for memory region callbacks There were no comments in some instances (gdb/defs.h, gdb/core.c and gdb/linux-tdep.c), so address that by adding comments where those are missing. 2022-11-23 Tom de Vries Fix gdb.cp/gdb2495.exp on powerpc64le On powerpc64le-linux I ran into this FAIL: ... (gdb) p exceptions.throw_function()^M terminate called after throwing an instance of 'int'^M ^M Program received signal SIGABRT, Aborted.^M 0x00007ffff7979838 in raise () from /lib64/libc.so.6^M The program being debugged was signaled while in a function called from GDB.^M GDB remains in the frame where the signal was received.^M To change this behavior use "set unwindonsignal on".^M Evaluation of the expression containing the function^M (SimpleException::throw_function()) will be abandoned.^M When the function is done executing, GDB will silently stop.^M (gdb) FAIL: gdb.cp/gdb2495.exp: call a function that raises an exception \ without a handler. ... The following happens: - we start an inferior call - an internal breakpoint is set on the global entry point of std::terminate - the inferior call uses the local entry point - the breakpoint is not triggered - we run into std::terminate We can fix this by simply adding the missing gdbarch_skip_entrypoint call in create_std_terminate_master_breakpoint, but we try to do this a bit more generic, by: - adding a variant of function create_internal_breakpoint which takes a minimal symbol instead of an address as argument - in the new function: - using both gdbarch_convert_from_func_ptr_addr and gdbarch_skip_entrypoint - documenting why we don't need to use gdbarch_addr_bits_remove - adding a note about possibly needing gdbarch_deprecated_function_start_offset. - using the new function in: - create_std_terminate_master_breakpoint - create_exception_master_breakpoint_hook, which currently uses only gdbarch_convert_from_func_ptr_addr. Note: we could use the new function in more locations in breakpoint.c, but as we're not aware of any related failures, we declare this out of scope for this patch. Tested on x86_64-linux, powerpc64le-linux. Co-Authored-By: Ulrich Weigand Tested-by: Carl Love PR tdep/29793 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29793 2022-11-23 Xiao Zeng RISC-V: Make R_RISCV_SUB6 conforms to riscv ABI standard According to the riscv psabi, R_RISCV_SUB6 only allows 6 least significant bits are valid, but since binutils implementation, we usually get 8 bits field for it. That means, the high 2 bits could be other field and have different purpose. Therefore, we should filter the 8 bits to 6 bits before calculate, and then only encode the valid 6 bits back. By the way, we also need the out-of-range check for R_RISCV_SUB6, and the overflow checks for all R_RISCV_ADD/SUB/SET relocations, but we can add them in the future patches. Passing riscv-gnu-toolchain regressions. bfd/ChangeLog: * elfnn-riscv.c (riscv_elf_relocate_section): Take the R_RISCV_SUB6 lower 6 bits as the significant bit. * elfxx-riscv.c (riscv_elf_add_sub_reloc): Likewise. 2022-11-23 Mark Harmstone gas: Add --gcodeview option ld: Add section contributions substream to PDB files 2022-11-23 GDB Administrator Automatic date update in version.in 2022-11-22 John Baldwin aarch64-fbsd: Use a static regset for the TLS register set. This uses custom collect/supply regset handlers which pass the TLS register number from the gdbarch_tdep as the base register number. Approved-By: Simon Marchi 2022-11-22 John Baldwin arm-fbsd: Use a static regset for the TLS register set. This uses custom collect/supply regset handlers which pass the TLS register number from the gdbarch_tdep as the base register number. Approved-By: Simon Marchi 2022-11-22 John Baldwin fbsd-nat: Pass an optional register base to the register set helpers. This is needed to permit using the helpers for register sets with a variable base. In particular regnum needs to be converted into a relative register number before passed to regcache_map_supplies. Approved-By: Simon Marchi 2022-11-22 John Baldwin fbsd-nat: Use regset supply/collect methods. fbsd-nat includes various helper routines for fetching and storing register sets via ptrace where the register set is described by a regset. These helper routines directly invoke the supply/collect_regset regcache methods which doesn't permit a regset to provide custom logic when fetching or storing a register set. Instead, just use the function pointers from the struct regset directly. Approved-By: Simon Marchi 2022-11-22 John Baldwin regcache: Add collect/supply_regset variants that accept a register base. Some register sets described by an array of regcache_map_entry structures do not have fixed register numbers in their associated architecture but do describe a block of registers whose numbers are at fixed offsets relative to some base register value. An example of this are the TLS register sets for the ARM and AArch64 architectures. Currently OS-specific architectures create register maps and register sets dynamically using the register base number. However, this requires duplicating the code to create the register map and register set. To reduce duplication, add variants of the collect_regset and supply_regset regcache methods which accept a base register number. For valid register map entries (i.e. not REGCACHE_MAP_SKIP), add this base register number to the value from the map entry to determine the final register number. Approved-By: Simon Marchi 2022-11-22 H.J. Lu x86: Don't define _TLS_MODULE_BASE_ for ld -r bfd/ PR ld/29820 * elfxx-x86.c (_bfd_x86_elf_always_size_sections): Don't define _TLS_MODULE_BASE_ for ld -r. ld/ PR ld/29820 * testsuite/ld-x86-64/pr29820.d: New file. * testsuite/ld-x86-64/pr29820.s: Likewise. * testsuite/ld-x86-64/x86-64.ex: Run pr29820. 2022-11-22 Alan Modra Don't use "long" in readelf for file offsets The aim here is to improve readelf handling of large 64-bit object files on LLP64 hosts (Windows) where long is only 32 bits. The patch changes more than just file offsets. Addresses and sizes are also changed to avoid "long". Most places get to use uint64_t even where size_t may be more appropriate, because that allows some overflow checks to be implemented easily (*alloc changes). * dwarf.c (cmalloc, xcmalloc, xcrealloc, xcalloc2): Make nmemb parameter uint64_t. * dwarf.h: Update prototypes. (struct dwarf_section): Make num_relocs uint64_t. * elfcomm.c (setup_archive): Update error format. * elfcomm.h (struct archive_info): Make sym_size, longnames_size, nested_member_origin, next_arhdr_offset uint64_t. * readelf.c (struct filedata): Make archive_file_offset, archive_file_size, string_table_length, dynamic_addr, dynamic_nent, dynamic_strings_length, num_dynamic_syms, dynamic_syminfo_offset uint64_t. (many functions): Replace uses of "unsigned long" with "uint64_t" or "size_t". 2022-11-22 Alan Modra Re: readelf: use fseeko64 or fseeko if possible Replace the macros with a small wrapper function that verifies the fseek offset arg isn't overlarge. * readelf.c (FSEEK_FUNC): Delete, replace uses with.. (fseek64): ..this new function. (process_program_headers): Don't cast p_offset to long. 2022-11-22 Torbjörn SVENSSON gdb/arm: Fix obvious typo in b0b23e06c3a As part of the rebase of the patch, I managed to loose the local changes I had for the comments from Tomas in https://sourceware.org/pipermail/gdb-patches/2022-November/193413.html This patch corrects the obvious two typos. 2022-11-22 Michael Matz binutils/configure.ac: integrate last change Integrate back checks for fseeko{,64} into configure.ac, so that regeneration works. binutils/ * configure.ac: Add fseeko, fseeko64 checks. * configure: Regenerate. 2022-11-22 Shahab Vahedi opcodes: Correct address for ARC's "isa_config" aux reg This patch changes the address for "isa_config" auxiliary register from 0xC2 to the correct value 0xC1. Moreover, it only exists in arc700+ and not all ARCs. opcodes/ChangeLog: * arc-regs.h: Change isa_config address to 0xc1. isa_config exists for ARC700 and ARCV2 and not ARCALL. 2022-11-22 Bruno Larsen gdb/testsuite: remove gcc restriction from gdb.dwarf2/clang-cli-macro.exp With the recent changes to the dwarf assembler, there is no longer a need to test for gcc in gdb.dwarf2/clang-cli-macro.exp and mark it as untested. This commit removes that logic. 2022-11-22 Jan Beulich gas/sframe: avoid "shadowing" of glibc function name Once again: Old enough glibc has an (unguarded) declaration of index() in string.h, which triggers a "shadows a global declaration" warning with our choice of wanring level and with at least some gcc versions. 2022-11-22 GDB Administrator Automatic date update in version.in 2022-11-21 Brett Werling readelf: use fseeko64 or fseeko if possible Changes readelf to make use first of fseeko64 and then fseeko, depending on which of those is available. If neither is available, reverts to the previous behavior of using fseek. This is necessary when building readelf for LLP64 systems, where a long will only be 32 bits wide. If the elf file in question is >= 2 GiB, that is greater than the max long value and therefore fseek will fail indicating that the offset is negative. On such systems, making use of fseeko64 or fseeko will result in the ability so seek past the 2 GiB max long boundary. Note that large archive handling in readelf remains to be fixed. 2022-11-21 Alan Modra PR29807, SIGSEGV when linking fuzzed PE object PR 29807 * cofflink.c (_bfd_coff_generic_relocate_section): Skip relocs against symbols with a NULL section. 2022-11-21 Alan Modra Re: ld: Always output local symbol for relocatable link Remove this code dating back to commit 98790d3a95fc entirely, what it was trying to do is done elsewhere. PR ld/29761 * elflink.c (elf_link_output_symstrtab): Don't handle symbols in SEC_EXCLUDE sections here. 2022-11-21 Philippe Waroquiers When getting the locno of a bpstat, handle the case of bp with null locations. The test py-objfile.exp unloads the current file while debugging the process. This results in bpstat bs->b->loc to become nullptr. Handle this case in breakpoint.c:bpstat_locno. Note: GDB crashes on this problem with an internal error, but the end of gdb summary shows: ... === gdb Summary === # of expected passes 36 The output also does not contain a 'FAIL:'. After the fix, the nr of expected passes increased. In the gdb.log output, one can see: ... Fatal signal: Segmentation fault ----- Backtrace ----- 0x55698905c5b9 gdb_internal_backtrace_1 ../../binutils-gdb/gdb/bt-utils.c:122 0x55698905c5b9 _Z22gdb_internal_backtracev ... ERROR: Couldn't send python print(objfile.filename) to GDB. ERROR: : spawn id exp9 not open while executing "expect { -i exp9 -timeout 10 -re ".*A problem internal to GDB has been detected" { fail "$message (GDB internal error)" gdb_internal_error..." ("uplevel" body line 1) invoked from within .... Wondering if it might be possible to improve gdb_test to have gdb_test "python print(objfile.filename)" "None" \ "objfile.filename after objfile is unloaded" reporting a failed result instead of just producing the internal error. 2022-11-21 Philippe Waroquiers Fix use after free introduced by $_hit_bpnum/$_hit_locno variables. If the commands of the bpstat bs contain commands such as step or next or continue, the BS and its commands are freed by execute_control_command. So, we cannot remember the BS that was printed. Instead, remember the bpnum and locno. Regtested on debian/amd64 and re-run a few tests under valgrind. 2022-11-21 Philippe Waroquiers Fix step-over-syscall.exp matching regexp for $bpnum.$locno matching step-over-syscall.exp has some specific tests for gdbserver. The regexp matching breakpoint hit must take the added locno into account. Test re-run in 3 modes (normal, native-gdbserver and native-extended-gdbserver). 2022-11-21 Nick Clifton Fix ARM and AArch64 assembler tests to work in a multi-arch environment. PR 29764 gas * testsuite/gas/arm/cpu-cortex-a76ae.d: Add arm prefix to the -m option passed to objdump. * testsuite/gas/arm/cpu-cortex-a77.d: Likewise. * testsuite/gas/aarch64/cpu-cortex-a76ae.d: Add aarch64 prefix to the -m option passed to objdump. * testsuite/gas/aarch64/cpu-cortex-a77.d: Likewise. bfd * cpu-arm.c (scan): Accept machine names prefixed with "arm:". * cpu-aarch64.c (scan): Accept machine names prefixed with "aarch64:". bin * doc/binutils.texi (objdump): Note that the -m option supports the : syntax. 2022-11-21 Torbjörn SVENSSON gdb/arm: Ensure that stack pointers are in sync For targets with secext, msp and psp can be seen as an alias for one of msp_s, msp_ns, psp_s or psp_ns. Without this patch, sp might be secure, but msp or psp is non-secure (this state can not happen in the hardware). gdb/arm: Update active msp/psp when switching stack For targets with secext, msp and psp can be seen as an alias for one of msp_s, msp_ns, psp_s or psp_ns. When switching active sp, the corresponding msp/psp needs to be switched too. 2022-11-21 Jiangshuai Li gdb/csky just return type from csky_vector_type() for vector resgisters Some gdb stubs may not describe the type for vector registers in the tdesc-xml and only send bitsize="128", gdb can't deal with a reg with default type int with bitsize==128. So Just return csky_vector_type() for vector resgisters. gdb/csky return type int32 for float and vector pseudo regs When reg_nr is one of the float and vector pseudo registers, return builtin_type (gdbarch)->builtin_int32 for it. 2022-11-21 GDB Administrator Automatic date update in version.in 2022-11-20 Rainer Orth [PR build/29791] gnulib: Disable _GL_ATTRIBUTE_DEALLOC on Solaris gdbsupport compilation badly fails with GCC 12 on Solaris, with errors like ../gnulib/config.h:1693:72: error: ‘malloc’ attribute argument 1 is ambiguous 1693 | # define _GL_ATTRIBUTE_DEALLOC(f, i) __attribute__ ((__malloc__ (f, i))) | ^ ../gnulib/config.h:1693:72: note: use a cast to the expected type to disambiguate We've not yet been able to determine where the ambiguity actually lies, so this patch works around the issue by disabling _GL_ATTRIBUTE_DEALLOC on Solaris, at least as a workaround for GDB 13. As Tom suggested in the PR, this is done using our infrastructure for local gnulib patches. Tested on sparcv9-sun-solaris2.11, amd64-pc-solaris2.11, and x86_64-pc-linux-gnu. Approved-By: Simon Marchi 2022-11-20 Rainer Orth Fix sol-thread.c compilation on 32-bit Solaris sol-thread.c fails to compile on 32-bit Solaris: there are several instances of In file included from /vol/src/gnu/gdb/hg/master/local/gdb/../gdbsupport/common-defs.h:203, from /vol/src/gnu/gdb/hg/master/local/gdb/defs.h:28, from /vol/src/gnu/gdb/hg/master/local/gdb/sol-thread.c:51: /vol/src/gnu/gdb/hg/master/local/gdb/sol-thread.c: In member function ‘virtual void sol_thread_target::resume(ptid_t, int, gdb_signal)’: /vol/src/gnu/gdb/hg/master/local/gdb/sol-thread.c:416:20: error: format ‘%ld’ expects argument of type ‘long int’, but argument 2 has type ‘ULONGEST’ {aka ‘long long unsigned int’} [-Werror=format=] 416 | warning (_("Specified thread %ld seems to have terminated"), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /vol/src/gnu/gdb/hg/master/local/gdb/../gdbsupport/gdb_locale.h:28:29: note: in definition of macro ‘_’ 28 | # define _(String) gettext (String) | ^~~~~~ /vol/src/gnu/gdb/hg/master/local/gdb/sol-thread.c:416:40: note: format string is defined here 416 | warning (_("Specified thread %ld seems to have terminated"), | ~~^ | | | long int | %lld Fixed by using pulongest () instead. Tested on i386-pc-solaris2.11, amd64-pc-solaris2.11, sparc-sun-solaris2.11, and sparcv9-sun-solaris2.11 (together with Simon's patch for PR build/29798). 2022-11-20 GDB Administrator Automatic date update in version.in 2022-11-19 Philippe Waroquiers Add missing gdb_prompt in ctxobj.exp to avoid random failure, fix typo. ctxobj.exp fails randomly when computer is loaded. With the addition of $gdb_prompt in the regexp testing for breakpoint hit, I could not make it fail anymore. Also fixed a typo in a comment. 2022-11-19 Philippe Waroquiers Show locno for 'multi location' breakpoint hit msg+conv var $_hit_bbnum $_hit_locno PR breakpoints/12464 This implements the request given in PR breakpoints/12464. Before this patch, when a breakpoint that has multiple locations is reached, GDB printed: Thread 1 "zeoes" hit Breakpoint 1, some_func () at somefunc1.c:5 This patch changes the message so that bkpt_print_id prints the precise encountered breakpoint: Thread 1 "zeoes" hit Breakpoint 1.2, some_func () at somefunc1.c:5 In mi mode, bkpt_print_id also (optionally) prints a new table field "locno": locno is printed when the breakpoint hit has more than one location. Note that according to the GDB user manual node 'GDB/MI Development and Front Ends', it is ok to add new fields without changing the MI version. Also, when a breakpoint is reached, the convenience variables $_hit_bpnum and $_hit_locno are set to the encountered breakpoint number and location number. $_hit_bpnum and $_hit_locno can a.o. be used in the command list of a breakpoint, to disable the specific encountered breakpoint, e.g. disable $_hit_bpnum.$_hit_locno In case the breakpoint has only one location, $_hit_locno is set to the value 1, so as to allow a command such as: disable $_hit_bpnum.$_hit_locno to disable the breakpoint even when the breakpoint has only one location. This also fixes a strange behaviour: when a breakpoint X has only one location, enable|disable X.1 is accepted but transforms the breakpoint in a multiple locations breakpoint having only one location. The changes in RFA v4 handle the comments of Tom Tromey: - Changed convenience var names from $bkptno/$locno to $_hit_bpnum/$_hit_locno. - updated the tests and user manual accordingly. User manual also explictly describes that $_hit_locno is set to 1 for a breakpoint with a single location. - The variable values are now set in bpstat_do_actions_1 so that they are set for silent breakpoints, and when several breakpoints are hit at the same time, that the variables are set to the printed breakpoint. The changes in RFA v3 handle the additional comments of Eli: GDB/NEW: - Use max 80-column - Use 'code location' instead of 'location'. - Fix typo $bkpno - Ensure that disable $bkptno and disable $bkptno.$locno have each their explanation inthe example - Reworded the 'breakpoint-hit' paragraph. gdb.texinfo: - Use 'code location' instead of 'location'. - Add a note to clarify the distinction between $bkptno and $bpnum. - Use @kbd instead of examples with only one command. Compared to RFA v1, the changes in v2 handle the comments given by Keith Seitz and Eli Zaretskii: - Use %s for the result of paddress - Use bkptno_numopt_re instead of 2 different -re cases - use C@t{++} - Add index entries for $bkptno and $locno - Added an example for "locno" in the mi interface - Added examples in the Break command manual. 2022-11-19 Tsukasa OI RISC-V: Add 'Ssstateen' extension and its CSRs This commit adds 'Ssstateen' extension, which is a supervisor-visible view of the 'Smstateen' extension. It means, this extension implements sstateen* and hstateen* CSRs of the 'Smstateen' extension. Note that 'Smstateen' extension itself is unchanged but due to implementation simplicity, it is implemented so that 'Smstateen' implies 'Ssstateen' (just like 'M' implies 'Zmmul'). This is based on the latest version of RISC-V Profiles (version 0.9-draft, Frozen): bfd/ChangeLog: * elfxx-riscv.c (riscv_implicit_subsets): Update implication rules. (riscv_supported_std_s_ext) Add 'Ssstateen' extension. gas/ChangeLog: * config/tc-riscv.c (enum riscv_csr_class): Rename CSR_CLASS_SMSTATEEN_AND_H{,_32} to CSR_CLASS_SSSTATEEN_... Add CSR_CLASS_SSSTATEEN. (riscv_csr_address): Support new/renamed CSR classes. * testsuite/gas/riscv/csr.s: Add 'Ssstateen' extension to comment. * testsuite/gas/riscv/csr-version-1p9p1.l: Reflect changes to error messages. * testsuite/gas/riscv/csr-version-1p10.l: Likewise. * testsuite/gas/riscv/csr-version-1p11.l: Likewise. * testsuite/gas/riscv/csr-version-1p12.l: Likewise. * testsuite/gas/riscv/ssstateen-csr.s: Test for 'Ssstateen' CSRs. * testsuite/gas/riscv/ssstateen-csr.d: Likewise. * testsuite/gas/riscv/smstateen-csr-s.d: Test to make sure that supervisor/hypervisor part of 'Smstateen' CSRs are accessible from 'RV32IH_Smstateen', not just from 'RV32IH_Ssstateen' that is tested in ssstateen-csr.d. include/ChangeLog: * opcode/riscv-opc.h: Update DECLARE_CSR declarations with new CSR classes. 2022-11-19 GDB Administrator Automatic date update in version.in 2022-11-18 Simon Marchi gdbserver/linux-x86: move lwp declaration out of __x86_64__ region Commit 4855cbdc3d8f ("gdbserver/linux-x86: make is_64bit_tdesc accept thread as a parameter") caused this when building in 32 bits / i386 mode: CXX linux-x86-low.o In file included from /home/smarchi/src/binutils-gdb/gdbserver/linux-x86-low.cc:24: /home/smarchi/src/binutils-gdb/gdbserver/linux-x86-low.cc: In member function ‘virtual int x86_target::low_get_thread_area(int, CORE_ADDR*)’: /home/smarchi/src/binutils-gdb/gdbserver/linux-x86-low.cc:357:47: error: ‘lwp’ was not declared in this scope 357 | struct thread_info *thr = get_lwp_thread (lwp); | ^~~ /home/smarchi/src/binutils-gdb/gdbserver/linux-low.h:709:31: note: in definition of macro ‘get_lwp_thread’ 709 | #define get_lwp_thread(lwp) ((lwp)->thread) | ^~~ This is because it moved the lwp variable declaration inside the __x86_64__ guard, making it unavailable when building in 32 bits mode. Move the lwp variable outside of the __x86_64__ region. Change-Id: I7fa3938c6b44b345c27a52c8b8d3ea12aba53e05 2022-11-18 Simon Marchi gdbserver: use current_process in ps_getpid The following patch ("gdbserver: switch to right process in find_one_thread") makes it so find_one_thread calls into libthread_db with a current process but no current thread. This tripped on ps_getpid using current_thread in order to get the process' pid. Get the pid from `current_process ()` instead, which removes the need to have a current thread. Eventually, it would be good to get it from the gdb_ps_prochandle_t structure, to avoid the need for a current process as well. Reviewed-By: Andrew Burgess Change-Id: I9d2fae266419199a2fbc2fde0a5104c6e0dbd2d5 2022-11-18 Simon Marchi gdbserver/linux-x86: make is_64bit_tdesc accept thread as a parameter ps_get_thread_area receives as a parameter the lwpid it must work on. It then calls is_64bit_tdesc, which uses the current_thread as the thread to work on. However, it is not said that both are the same. This became a problem when working in a following patch that makes find_one_thread switch to a process but to no thread (current_thread == nullptr). When libthread_db needed to get the thread area, is_64bit_tdesc would try to get the regcache of a nullptr thread. Fix that by making is_64bit_tdesc accept the thread to work on as a parameter. Find the right thread from the context, when possible (when we know the lwpid to work on). Otherwise, pass "current_thread", to retain the existing behavior. Reviewed-By: Andrew Burgess Change-Id: I44394d6be92392fa28de71982fd04517ce8a3007 2022-11-18 Simon Marchi gdbserver/linux: take condition out of callback in find_lwp_pid Just a small optimization, it's not necessary to recompute lwp at each iteration. While at it, change the variable type to long, as ptid_t::lwp returns a long. Reviewed-By: Andrew Burgess Change-Id: I181670ce1f90b59cb09ea4899367750be2ad9105 2022-11-18 Johnson Sun Fix deletion of FinishBreakpoints Currently, FinishBreakpoints are set at the return address of a frame based on the `finish' command, and are meant to be temporary breakpoints. However, they are not being cleaned up after use, as reported in PR python/18655. This was happening because the disposition of the breakpoint was not being set correctly. This commit fixes this issue by correctly setting the disposition in the post-stop hook of the breakpoint. It also adds a test to ensure this feature isn't regressed in the future. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=18655 2022-11-18 Simon Marchi gdb: fix symtab.c build on 32 bit targets When building on Ubuntu 22.04, gcc 12, x86-64 with -m32 and -O2, I get: CXX symtab.o /home/smarchi/src/binutils-gdb/gdb/symtab.c: In member function ‘std::vector global_symbol_searcher::search() const’: /home/smarchi/src/binutils-gdb/gdb/symtab.c:4961:44: error: ‘__builtin___sprintf_chk’ may write a terminating nul past the end of the destination [-Werror=format-overflow=] 4961 | sprintf (tmp, "operator%.*s%s", fix, " ", opname); | ^ In file included from /usr/include/stdio.h:894, from ../gnulib/import/stdio.h:43, from /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/common-defs.h:86, from /home/smarchi/src/binutils-gdb/gdb/defs.h:28, from /home/smarchi/src/binutils-gdb/gdb/symtab.c:20: In function ‘int sprintf(char*, const char*, ...)’, inlined from ‘std::vector global_symbol_searcher::search() const’ at /home/smarchi/src/binutils-gdb/gdb/symtab.c:4961:16: /usr/include/i386-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 9 and 2147483648 bytes into a destination of size 2147483647 38 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1, | ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 39 | __glibc_objsize (__s), __fmt, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 40 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ PR build/29798 shows a similar error message but on Solaris. Work around that by using string_printf. It is a good thing to get rid of the alloca anyway. Change-Id: Ifbac11fee3062ad7f134d596b4e2229dc5d166f9 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29798 2022-11-18 Andrew Burgess gdb/testsuite: rewrite gdb.cp/call-method-register.exp with dwarf assembler Convert the gdb.cp/call-method-register.exp test to make use of the DWARF assembler. The existing gdb.cp/call-method-register.exp test relies on a GCC extension - forcing a local variable into a particular named register. This means that the test will only work with Clang, and, as we have to name the register into which the variable will be placed, will only work for those targets where we've selected a suitable register, currently this is x86-64, i386, and ppc64. By switching to the DWARF assembler, the test will work with gcc and clang, and should work on most, if not all, architectures. The test creates a small structure, something that can fit within a register, and then tries to call a method on the structure from within GDB. This should fail because GDB can't take the address of the in register structure (for the `this` pointer). As the test is for a failure case, then we don't really care _which_ register the structure is in, and I take advantage of this for the DWARF assembler test, I just declare that the variable is in DW_OP_reg0, whatever that might be. I've tested the new test on x86-64, ppc, aarch64, and risc-v, and the test runs, and passes on all these architectures, which is already more than we used to cover. Additionally, on x86-64, I've tested with Clang and gcc, and the test runs and passed with both compilers. Reviewed-By: Lancelot SIX 2022-11-18 Andrew Burgess gdb/testsuite: fix gdb.debuginfod/fetch_src_and_symbols.exp with Clang The gdb.debuginfod/fetch_src_and_symbols.exp test is showing a single failure when run with some older versions of Clang, e.g. 9.0.1. The problem appears to be with Clang's generated line table. The test source looks like this: int main() { asm ("main_label: .globl main_label"); return 0; } In GDB, when we 'start', we expect to stop at the 'return 0;' line. This is the behaviour when the compiler is gcc, or later versions of Clang. However, with Clang 9.0.2, I see GDB stop on the 'asm' line. In this commit I'll fix this issue by placing a breakpoint on the return line, and then using gdb_continue_to_breakpoint to ensure we have stopped in the correct place. Of course, using gdb_continue_to_breakpoint will only work if we are not already stopped at the breakpoint location, so I've added some filler work before the 'return 0;' line. With this done we can use gdb_continue_to_breakpoint in all cases. As a result of adding the new filler work, one of the later tests, that used the 'list' command, no longer see the correct expected output (the top line of the source file is no longer included in the output). I've fixed this by listing a known specific line, the test is checking that GDB managed to find the source file, it doesn't matter which source line we list, as long as we can list something. 2022-11-18 Andrew Burgess gdb/testsuite: rename source file gdb.debuginfod/main.c The test gdb.debuginfod/fetch_src_and_symbols.exp uses a source file named main.c. I can't see any particular reason why the file is named as such. Usually test source files are named after the test script. This commit just renames the source file inline with the test script, and updates the call to standard_testfile (removing the reference to main.c). There's no particular reason for this change other than seeing the file named main.c made me thing that the source file must be shared with some other test (it isn't). There should be no change in what is tested after this commit. 2022-11-18 Andrew Burgess gdb/testsuite: add (and use) a new build-id compile option I noticed that the gdb.debuginfod/fetch_src_and_symbols.exp test was failing when run with Clang as the compiler. This test relies on the compiled binaries having a build-id within them. For GCC, really GNU ld, the default is to always include a build-id. When compiling with Clang though, the default is for no build-id. I did consider *always* turning on the build-id feature when the compiler is Clang, but that felt a little weird. Instead, I propose that we add a new 'build-id' compiler option to gdb_compile, this flag indicates that the test _requires_ a build-id. In gcc_compile we can then add the required flags if the compiler is Clang so that we do get a build-id. With this change the gdb.debuginfod/fetch_src_and_symbols.exp test now (mostly) passes with Clang 9.0.1 and 15.0.2, and still passes with gcc. The 'mostly' part is an unrelated issue, and will be addressed in a later commit in this series. Reviewed-By: Lancelot SIX 2022-11-18 Andrew Burgess gdb/testsuite: fix gdb.compile/compile-ops.exp with clang I noticed that the gdb.compile/compile-ops.exp test was failing when run with Clang as the compiler. This test makes use of the DWARF assembler, and, it turns out, uses a technique which is not portable to Clang. This problem is described in the comment on the function_range proc in lib/dwarf.exp, the explanation is: # If the compiler is gcc, we can do the following to get function start # and end address too: # # asm ("func_start: .globl func_start"); # static void func (void) {} # asm ("func_end: .globl func_end"); # # however, this isn't portable, because other compilers, such as clang, # may not guarantee the order of global asms and function. The code # becomes: # # asm ("func_start: .globl func_start"); # asm ("func_end: .globl func_end"); # static void func (void) {} These start/end labels are used for computing the function start, end, and length. The portable solution is to place a label within the function, like this: # int main (void) # { # asm ("main_label: .globl main_label"); # return 0; # } And make use of 'proc function_range' (from lib/dwarf.exp). So, that's what I do in this commit. One consequence of this change is that we need to compile the source file, and have it loaded into a GDB session, before calling function_range, so I've added an early call to prepare_for_testing. Additionally, this test script was generating the DWARF assembler into a file called gdbjit-ops.S, I suspect a copy and paste issue there, so I've switched this to use compile-ops-dbg.S instead, which is more inline with what other DWARF assembler tests do. The only other change, which might be a problem, is that I also deleted these two lines from the source file: asm (".section \".text\""); asm (".balign 8"); These lines were setting the alignment of the .text section. What I don't know is whether this was significant or not. If it is significant, then I can't see why. On x86-64, the test still passes fine without these lines, but that doesn't mean the test wont start failing on some other architecture. Still, I figure, lets remove them, then, if/when we find a test that starts failing, we can add the lines back, along with an explanation for why the extra alignment is required. But, if people would prefer to be more conservative, then I'm happy to just add the lines back. Reviewed-By: Lancelot SIX 2022-11-18 Andrew Burgess gdb/testsuite: fix gdb.trace/unavailable-dwarf-piece.exp with Clang I noticed that the test gdb.trace/unavailable-dwarf-piece.exp was failing when run with Clang. Or rather, the test was not running as the test executable failed to compile. The problem is that Clang was emitting this warning: warning: argument unused during compilation: '-fdiagnostics-color=never' [-Wunused-command-line-argument] This warning is emitted when compiling the assembler file generated by the DWARF assembler. Most DWARF assembler tests generate the assembler file into a file with the '.S' extension. However, this particular test uses a '.s' extension. Now a .S file will be passed through the preprocessor, while a .s will be sent straight to the assembler. My guess is that Clang doesn't support the -fdiagnostics-color=never option for the assembler, but does for the preprocessor. That's a little annoying, but easily worked around. We don't care if our assembler file is passed through the preprocessor, so, in this commit, I just change the file extension from .s to .S, and the problem is fixed. Currently, the unavailable-dwarf-piece.exp script names the assembler file using standard_output_file, in this commit I've switched to make use of standard_testfile, as that seems to be the more common way of doing this sort of thing. With these changes the test now passes with Clang 9.0.1 and 15.0.2, and also still passes with gcc. Reviewed-By: Lancelot SIX 2022-11-18 Andrew Burgess gdb/testsuite: don't avoid DWARF assembler tests with Clang Two tests make the claim that the DWARF assembler requires gcc, however, this isn't true. I think at one point, when the DWARF assembler was first added, we did use some techniques that were not portable (see the comments in lib/dwarf.exp on function_range for details), however, I think most DWARF assembler tests will now work fine with Clang. The two tests that I modify in this commit both work fine with Clang, at least, I've tested with Clang 9.0.1 and 15.0.2, and don't see any problems, so I'm removing the early return logic that stops these tests from running with Clang. Reviewed-By: Lancelot SIX 2022-11-18 Zac Walker GAS fix alignment for aarch64-pe Fixes issue where various values of '.align' causes writing of COFF files to fail. Specific to the aarch64-pe target. 2022-11-18 Alan Modra PR29799 heap buffer overflow in display_gdb_index dwarf.c:10548 PR 29799 * dwarf.c (display_gdb_index): Typo fix. go32 sanity check * coff-stgo32 (go32exe_check_format): Sanity check stubsize against filesize before malloc. Regen potfiles for sframe 2022-11-18 GDB Administrator Automatic date update in version.in 2022-11-17 Indu Bhagat [gas, aarch64]: fix build breakage for aarch64-pe SFrame is supported for ELF only. Keep the definitions and declarations guarded with OBJ_ELF consistently. ChangeLog: * gas/config/tc-aarch64.h: Guard SFrame related definitions with OBJ_ELF. 2022-11-17 Tom Tromey Fix static initialization order problem in windows-nat.c This patch fixes a static initialization order problem in windows-nat.c that was pointed out by Jon Turney. The underlying problem is that the windows_nat_target constructor relies on serial_logfile already being constructed, but this is not enforced by C++ rules. This patch fixes the problem by initializing the global windows_nat_target later. 2022-11-17 H.J. Lu opcodes: Define NoSuf in i386-opc.tbl Use NoSuf to replace No_bSuf|No_wSuf|No_lSuf|No_sSuf|No_qSuf|No_ldSuf and add the explicit NoSuf to AddrPrefixOpReg in templates. * i386-opc.tbl (NoSuf): New macro. (AddrPrefixOpReg): Remove No_?Suf. Replace No_bSuf|No_wSuf|No_lSuf|No_sSuf|No_qSuf|No_ldSuf with NoSuf in templates. Add NoSuf to AddrPrefixOpReg in templates. 2022-11-17 H.J. Lu i386: Move i386_seg_prefixes to gas gas/ * config/tc-i386.c (i386_seg_prefixes): New. Moved from opcodes. opcodes/ * i386-opc.c (i386_seg_prefixes): Removed. * i386-opc.h (i386_seg_prefixes): Likewise. 2022-11-17 Carl Love PowerPC, fix gdb.base/retval-large-struct.exp Support for printining non-trivial return values was recently added in commit: commit a0eda3df5b750ae32576a9be092b361281a41787 Author: Carl Love Date: Mon Nov 14 16:22:37 2022 -0500 PowerPC, fix support for printing the function return value for non-trivial values. The functionality can now be used to fix gdb.base/retval-large-struct.exp. The test just needs to be compiled with -fvar-tracking to enable GDB to determine the address off the return buffer when the function is called. The current output from the test: 34 return big_struct; (gdb) PASS: gdb.base/retval-large-struct.exp: continue to breakpoint: Break in print_large_struct finish warning: Cannot determine the function return value. Try compiling with -fvar-tracking. Run till exit from #0 return_large_struct () at binutils-gdb-current/gdb/testsuite/gdb.base/retval-large-struct.c:34 main (argc=1, argv=0x7fffffffcd58) at binutils-gdb-current/gdb/testsuite/gdb.base/retval-large-struct.c:44 44 return 0; Value returned has type: struct big_struct_t. Cannot determine contents (gdb) FAIL: gdb.base/retval-large-struct.exp: finish from return_large_struct testcase binutils-gdb-current/gdb/testsuite/gdb.base/retval-large-struct.exp completed in 1 seconds This patch adds the command line argument -fvar-tracking to enable gdb to determine the return vaule and thus fixing the test. Patch tested on Power 10 with no regressions. 2022-11-17 Tom Tromey Use boolean literals for pagination_enabled I noticed a couple of spots that used '0' rather than 'false' when modifying pagination_enabled. This patch cleans these up. 2022-11-17 Carl Love Change NULL to nullptr in gdb/infcmd.c and gdb/infrun.c The GDB coding standard specifies that nullptr should be used instead of NULL. There are numerous uses of NULL and nullptr in files infcmd.c and infrun.c. This patch replaces the various uses of NULL with nullptr in the source files. The use of NULL in the comments was not changed. The patch does not introduce any functional changes. The patch has been tested on PowerPC and Intel X86_64 with no new unexpected test failures, unresolved tests, new core files etc. 2022-11-17 H.J. Lu ld: Always call elf_backend_output_arch_local_syms Always call elf_backend_output_arch_local_syms since only the backend knows if elf_backend_output_arch_local_syms is needed when all symbols are striped. elf_backend_output_arch_local_syms is defined only for x86, ARM and AARCH64. On x86, elf_backend_output_arch_local_syms must be called to handle local IFUNC symbols even if all symbols are striped. Update ARM and AARCH64 to skip elf_backend_output_arch_local_syms when symbols aren't needed. bfd/ PR ld/29797 * elf32-arm.c (elf32_arm_output_arch_local_syms): Skip if symbols aren't needed. * elfnn-aarch64.c (elfNN_aarch64_output_arch_local_syms): Likewise. * elflink.c (bfd_elf_final_link): Always call elf_backend_output_arch_local_syms if available. ld/ PR ld/29797 * testsuite/ld-elf/linux-x86.exp: Run PR ld/29797 test. * testsuite/ld-elf/pr29797.c: New file. 2022-11-17 Andrew Burgess gdb: new $_inferior_thread_count convenience variable Add a new convenience variable $_inferior_thread_count that contains the number of live (non-exited) threads in the current inferior. This can be used in command scripts, or breakpoint conditions, etc to adjust the behaviour for multi-threaded inferiors. This value is only stable in all-stop mode. In non-stop mode, where new threads can be started, and existing threads exit, at any time, this convenience variable can give a different value each time it is evaluated. 2022-11-17 Tom Tromey Remove two obsolete declarations I happened to find a couple of obsolete declarations in cli-interp.h. This patch removes them. Tested by rebuilding. 2022-11-17 Andrew Burgess gdb/testsuite: fix failure in gdb.python/py-send-packet.exp While working on another patch I noticed that, when run on an AArch64 target, the test gdb.python/py-send-packet.exp was failing: Traceback (most recent call last): File "", line 1, in File "/tmp/build/gdb/testsuite/outputs/gdb.python/py-send-packet/py-send-packet.py", line 106, in run_auxv_send_packet_test assert string == expected_result AssertionError Error while executing Python code. (gdb) FAIL: gdb.python/py-send-packet.exp: call python run_auxv_send_packet_test function The test uses 'maint packet ...' to send a packet to gdbserver, and then captures the output in TCL. This output is then passed through to a Python function, which performs some actions using the Python API, and compares the results from the Python API to the results captured in TCL from 'maint packet ...'. The problem is that the output captured in TCL contains lots of things like '\x000', when this is passed through to Python the '\x' causes this to be treated as an escape code, which isn't what we want - we want the actual string "\x000". So, in the TCL part of the test we were expanding '\x' to '\\x', this seemed to work fine for my testing on x86-64. However, on AArch64 what I see is that the results from 'maint packet ...' contain a literal '\' character followed by a literal 'x' character. When GDB prints this in the 'maint packet' output, GDB escapes the '\' for us, thus we get '\\x' printed by 'maint packet'. However, now our TCL test script kicks in and tries to "fix" the '\x', this means we now have '\\\x', which isn't correct. The problem is that in the TCL script we are too restrictive, we expand '\x' to '\\x', but really, we should be expanding all '\' characters, regardless of what follows them. This is what this patch does. After this the gdb.python/py-send-packet.exp test passes on AArch64 for me. 2022-11-17 Aditya Vidyadhar Kamath Fix call functions command bug in 64 bits programs for AIX In AIX for 64 bit programs we need to zero extend variables of integer or enum or char data type. Otherwise a zero will get dumped in the register as we memset our word to 0 and we copy non zero extended contents to the cache. 2022-11-17 Andrew Burgess gdb/fortran/testsuite: print values and types of string variables While looking through the Fortran tests, I couldn't find a test of GDB printing the value and type of a Fortran string defined using the 'character*SIZE' notation. This works fine in GDB right now, but I thought it wouldn't hurt to have a test for this, so this commit adds such a test. The test also includes printing a string that includes some embedded special characters: \n \r \t \000 - that's right, as Fortran strings are stored as an address and length, it is fine to include an embedded null, so this test includes an example of that. Standard Fortran doesn't support backslash escape sequences within strings, the special characters must be generated using the `achar` function. However, when GDB prints the strings we currently print using the standard C like backslash sequences. I'm not currently proposing to change that behaviour, the backslash sequences are more compact than the standard Fortran way of doing things, and are so widely used that I suspect most Fortran programmers will understand them. 2022-11-17 Rainer Orth Fix various procfs.c compilation errors procfs.c has accumulated several compilation errors lately (some of them new with GCC 12), which are fixed by this patch: * auxv_parse gets: /vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c:144:7: error: ‘int procfs_target::auxv_parse(gdb_byte**, gdb_byte*, CORE_ADDR*, CORE_ADDR*)’ marked ‘override’, but does not override 144 | int auxv_parse (gdb_byte **readptr, | ^~~~~~~~~~ Obviouly, procfs.c was missed in the auxv_parse constification. * dead_procinfo has: /vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c: In function ‘void dead_procinfo(procinfo*, const char*, int)’: /vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c:563:11: warning: the address of ‘procinfo::pathname’ will never be NULL [-Waddress] 563 | if (pi->pathname) | ~~~~^~~~~~~~ /vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c:238:8: note: ‘procinfo::pathname’ declared here 238 | char pathname[MAX_PROC_NAME_SIZE]; /* Pathname to /proc entry */ | ^~~~~~~~ The warning is correct, so the code can lose support for the NULL pathname case. * create_inferior has this ugly warning: /vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c: In member function ‘virtual void procfs_target::create_inferior(const char*, const std::string&, char**, int)’: /vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c:2815:19: warning: ‘char* std::strncpy(char*, const char*, size_t)’ output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] 2815 | strncpy (tryname, p, len); | ~~~~~~~~^~~~~~~~~~~~~~~~~ /vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c:2814:26: note: length computed here 2814 | len = strlen (p); | ~~~~~~~^~~ It seems that this is another case of GCC PR middle-end/88059, which Martin Sebor refuses to fix. So I'm using the hack suggested in the PR to use memcpy instead of strncpy. * find_memory_regions_callback fails with /vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c: In function ‘int find_memory_regions_callback(prmap*, find_memory_region_ftype, void*)’: /vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c:3167:18: error: too few arguments to function 3167 | return (*func) ((CORE_ADDR) map->pr_vaddr, | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~ 3168 | map->pr_size, | ~~~~~~~~~~~~~ 3169 | (map->pr_mflags & MA_READ) != 0, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 3170 | (map->pr_mflags & MA_WRITE) != 0, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 3171 | (map->pr_mflags & MA_EXEC) != 0, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 3172 | 1, /* MODIFIED is unknown, pass it as true. */ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 3173 | data); | ~~~~~ Again, procfs.c was overlooked when adding the new memory_tagged arg. Unfortunately, it wasn't even documented in gdb/defs.h when it was added in commit 68cffbbd4406b4efe1aa6e18460b1d7ca02549f1 Author: Luis Machado Date: Thu Mar 31 11:42:35 2022 +0100 [AArch64] MTE corefile support With those changes, procfs.c compiles again. Together with the hack from the Solaris gdbsupport breakage reported in PR build/29791, I was able to build and test gdb on both amd64-pc-solaris2.11 and sparcv9-sun-solaris2.11. Approved-By: Simon Marchi 2022-11-17 Christoph Müllner RISC-V: Add T-Head Int vendor extension This patch adds the XTheadInt extension, which provides interrupt stack management instructions. The XTheadFmv extension is documented in the RISC-V toolchain contentions: https://github.com/riscv-non-isa/riscv-toolchain-conventions Co-developed-by: Lifang Xia 2022-11-17 Christoph Müllner RISC-V: Add T-Head Fmv vendor extension This patch adds the XTheadFmv extension, which allows to access the upper 32 bits of a double-precision floating-point register in RV32. The XTheadFmv extension is documented in the RISC-V toolchain contentions: https://github.com/riscv-non-isa/riscv-toolchain-conventions Co-developed-by: Lifang Xia 2022-11-17 Tom de Vries [gdb/testsuite] Fix DUPLICATE in gdb.arch/ppc-fp.exp I noticed: ... DUPLICATE: gdb.arch/ppc-fp.exp: next ... Fix this by adding unique test names. Tested on powerpc64le-linux. 2022-11-17 GDB Administrator Automatic date update in version.in 2022-11-16 Kévin Le Gouguec Add myself to the gdb/MAINTAINERS write-after-approval list 2022-11-16 Kévin Le Gouguec Guard against frame.c destructors running before frame-info.c's On x86_64-windows, since 04e2ac7b2a7, we observe this internal error: [...]/gdbsupport/intrusive_list.h:458: internal-error: erase_element: Assertion `elem_node->prev != INTRUSIVE_LIST_UNLINKED_VALUE' failed. Breaking in the destructors for intrusive_list and frame_info_ptr shows that in this configuration, the destructors for frame.c's statically-stored objects are run before frame-info.c's: Thread 1 hit Breakpoint 7, intrusive_list >::~intrusive_list (this=0x7ff69c418c90 , __in_chrg=) [...]/../gdbsupport/intrusive_list.h:250 250 clear (); (gdb) bt #0 intrusive_list > ::~intrusive_list (this=0x7ff69c418c90 , __in_chrg=) [...]/../gdbsupport/intrusive_list.h:250 #1 0x00007ff69b78edba in __tcf_1 () [...]/frame-info.c:27 #2 0x00007ff9c457aa9f in msvcrt!_initterm_e () from C:\Windows\System32\msvcrt.dll #3 0x00007ff69b8246a6 in captured_main_1 (context=0x5ffe00) [...]/main.c:1111 #4 0x00007ff69b825149 in captured_main (data=0x5ffe00) [...]/main.c:1320 #5 0x00007ff69b8251b1 in gdb_main (args=0x5ffe00) [...]/main.c:1345 #6 0x00007ff69b5d1730 in main (argc=2, argv=0x751730) [...]/gdb.c:32 (gdb) c Continuing. Thread 1 hit Breakpoint 8, frame_info_ptr::~frame_info_ptr (this=0x7ff69c418e20 , __in_chrg=) [...]/frame-info.h:74 74 if (is_linked ()) (gdb) bt #0 frame_info_ptr::~frame_info_ptr (this=0x7ff69c418e20 , __in_chrg=) [...]/frame-info.h:74 #1 0x00007ff69b79a643 in __tcf_1 () [...]/frame.c:1675 #2 0x00007ff9c457aa9f in msvcrt!_initterm_e () from C:\Windows\System32\msvcrt.dll #3 0x00007ff69b8246a6 in captured_main_1 (context=0x5ffe00) [...]/main.c:1111 #4 0x00007ff69b825149 in captured_main (data=0x5ffe00) [...]/main.c:1320 #5 0x00007ff69b8251b1 in gdb_main (args=0x5ffe00) [...]/main.c:1345 #6 0x00007ff69b5d1730 in main (argc=2, argv=0x751730) [...]/gdb.c:32 Approved-By: Simon Marchi 2022-11-16 Vladimir Mezentsev PR29788, gprofng cannot display Java's generated assembly code gprofng/ChangeLog 2022-11-15 Vladimir Mezentsev PR gprofng/29788 * src/Experiment.h: Declare dyntext_name. * src/Experiment.cc: Use dyntext_name to initialize img_fname. 2022-11-16 Tom de Vries [gdb/testsuite] Use gdb_gcore_cmd in gdb.threads/gcore-thread.exp I noticed a plain gcore command in test-case gdb.threads/gcore-thread.exp: ... gdb_test "gcore $core0file" "Saved corefile .*" \ "save a zeroed-threads corefile" ... Use gdb_gcore_cmd instead. Tested on x86_64-linux. 2022-11-16 Carl Love Bug fix in commit for printing the function return value for non-trivial values The recent commit: commit a0eda3df5b750ae32576a9be092b361281a41787 Author: Carl Love Date: Mon Nov 14 16:22:37 2022 -0500 PowerPC, fix support for printing the function return value for non-trivial values. Is generating a segmentation fault on x86_64-linux. segfault: ... PASS: gdb.asm/asm-source.exp: info source asmsrc1.s ERROR: GDB process no longer exists UNRESOLVED: gdb.asm/asm-source.exp: finish from foo3 ... Reproduced on command line: ... $ gdb -q -batch -x outputs/gdb.asm/asm-source/gdb.in.1 ... The problem seems to be that: ... Thread 1 "gdb" received signal SIGSEGV, Segmentation fault. 0x000000000043de7a in symbol::type (this=0x0) at .../gdb_versions/devel/src/gdb/symtab.h:1287 1287 return m_type; ... because: ... (gdb) up #1 0x0000000000852d94 in finish_command (arg=0x0, from_tty=0) at .../gdb_versions/devel/src/gdb/infcmd.c:1887 1887 = check_typedef (sm->function->type ()->target_type ()); (gdb) p sm->function $1 = (symbol *) 0x0 The code is not checking if sm->function is NULL. If sm->function is NULL the check for the return buffer should be skipped. 2022-11-16 Tom Tromey Update Ada tasks documentation My co-worker Kévin noticed that the Ada tasks documentation is slightly out of date -- it does not document all the states that can be reported by ada-tasks.c. This patch adds the missing states to the appropriate node, and updates one state to reflect a change made some time ago. 2022-11-16 Pedro Alves gdb: add "set style tui-current-position on|off", default to off As discussed at: https://sourceware.org/pipermail/gdb-patches/2020-June/169519.html this patch disables source and assembly code highlighting for the text highlighted by the TUI's current position indicator, and adds a command to enable it back. 2022-11-16 Tom de Vries [gdb/testsuite] Modernize gdb.arch/i386-biarch-core.exp I noticed in test-case gdb.arch/i386-biarch-core.exp that we run into the completion limit for "complete set gnutarget": ... set gnutarget vms-libtxt^M set gnutarget *** List may be truncated, max-completions reached. ***^M (gdb) PASS: gdb.arch/i386-biarch-core.exp: complete set gnutarget ... Fix this by using get_set_option_choices. Also use get_set_option_choices for "complete set architecture i386", which required extending get_set_option_choices to accept a second argument, such that we can do: ... set archs [get_set_option_choices "set architecture" "i386"] ... because this returns an empty list: ... set archs [get_set_option_choices "set architecture i386"] ... because it does "complete set architecture i386 ". Also clean up the explicit gdb_exit/gdb_start and use clean_restart instead. Tested on x86_64-linux. 2022-11-16 Tom de Vries [gdb/testsuite] Fix gdb.arch/ppc64-symtab-cordic.exp without bzip2 After de-installing bzip2, I run into: ... Running ppc64-symtab-cordic.exp ... sh: bzip2: command not found PATH: gdb.arch/ppc64-symtab-cordic.exp: failed bzip2 for \ src/gdb/testsuite/gdb.arch/cordic.ko.bz2 ... Fix these by: - using remote_exec instead of catch system, and - using file tail in the untested message. I've tried making output redirection work with remote_exec, but that seems to be broken, so we now: - copy the file $f.bz2 into the desired location $dir/$f.bz2, and - decompress the bz2 file using "bzip2 -df $dir/$f.bz2", resulting in a file $dir/$f. Factor out new function decompress_bz2 to make the test-case less verbose, and also use it in gdb.arch/i386-biarch-core.exp. Tested on x86_64-linux, without and with bzip2 installed. 2022-11-16 GDB Administrator Automatic date update in version.in 2022-11-15 Indu Bhagat doc: add SFrame spec file ChangeLog: * libsframe/Makefile.am: Add info-in-builddir to AUTOMAKE_OPTIONS. Include doc/local.mk. * libsframe/Makefile.in: Regenerated. * libsframe/configure: Likewise. * libsframe/configure.ac: Check for makeinfo and set BUILD_INFO. * libsframe/doc/local.mk: New file. * libsframe/doc/sframe-spec.texi: Likewise. 2022-11-15 Indu Bhagat gas/NEWS: add text about new command line option and SFrame support ChangeLog: * gas/NEWS: Add SFrame related news. 2022-11-15 Indu Bhagat binutils/NEWS: add text for SFrame support ChangeLog: * binutils/NEWS: Add item for SFrame support. 2022-11-15 Indu Bhagat src-release.sh: Add libsframe Add libsframe to the list of top level directories that will be included in a release. ChangeLog: * src-release.sh: Add libsframe 2022-11-15 Indu Bhagat readelf/objdump: support for SFrame section This patch adds support for SFrame in readelf and objdump. The arguments of --sframe are optional for both readelf and objdump. include/ChangeLog: * sframe-api.h (dump_sframe): New function declaration. ChangeLog: * binutils/Makefile.am: Add dependency on libsframe for readelf and objdump. * binutils/Makefile.in: Regenerate. * binutils/doc/binutils.texi: Document --sframe=[section]. * binutils/doc/sframe.options.texi: New file. * binutils/objdump.c: Add support for SFrame format. * binutils/readelf.c: Likewise. * include/sframe-api.h: Add new API for dumping .sframe section. * libsframe/Makefile.am: Add sframe-dump.c. * libsframe/Makefile.in: Regenerate. * libsframe/sframe-dump.c: New file. 2022-11-15 Indu Bhagat bfd: linker: merge .sframe sections The linker merges all the input .sframe sections. When merging, the linker verifies that all the input .sframe sections have the same abi/arch. The linker uses libsframe library to perform key actions on the .sframe sections - decode, read, and create output data. This implies buildsystem changes to make and install libsframe before libbfd. The linker places the output .sframe section in a new segment of its own: PT_GNU_SFRAME. A new segment is not added, however, if the generated .sframe section is empty. When a section is discarded from the final link, the corresponding entries in the .sframe section for those functions are also deleted. The linker sorts the SFrame FDEs on start address by default and sets the SFRAME_F_FDE_SORTED flag in the .sframe section. This patch also adds support for generation of SFrame unwind information for the .plt* sections on x86_64. SFrame unwind info is generated for IBT enabled PLT, lazy/non-lazy PLT. The existing linker option --no-ld-generated-unwind-info has been adapted to include the control of whether .sframe unwind information will be generated for the linker generated sections like PLT. Changes to the linker script have been made as necessary. ChangeLog: * Makefile.def: Add install dependency on libsframe for libbfd. * Makefile.in: Regenerated. * bfd/Makefile.am: Add elf-sframe.c * bfd/Makefile.in: Regenerated. * bfd/bfd-in2.h (SEC_INFO_TYPE_SFRAME): Regenerated. * bfd/configure: Regenerate. * bfd/configure.ac: Add elf-sframe.lo. * bfd/elf-bfd.h (struct sframe_func_bfdinfo): New struct. (struct sframe_dec_info): Likewise. (struct sframe_enc_info): Likewise. (struct elf_link_hash_table): New member for encoded .sframe object. (struct output_elf_obj_tdata): New member. (elf_sframe): New access macro. (_bfd_elf_set_section_sframe): New declaration. * bfd/elf.c (get_segment_type): Handle new segment PT_GNU_SFRAME. (bfd_section_from_phdr): Likewise. (get_program_header_size): Likewise. (_bfd_elf_map_sections_to_segments): Likewise. * bfd/elf64-x86-64.c (elf_x86_64_link_setup_gnu_properties): Add contents to the .sframe sections or .plt* entries. * bfd/elflink.c (elf_section_ignore_discarded_relocs): Handle SEC_INFO_TYPE_SFRAME. (_bfd_elf_default_action_discarded): Handle .sframe section. (elf_link_input_bfd): Merge .sframe section. (bfd_elf_final_link): Write the output .sframe section. (bfd_elf_discard_info): Handle discarding .sframe section. * bfd/elfxx-x86.c (_bfd_x86_elf_size_dynamic_sections): Create .sframe section for .plt and .plt.sec. (_bfd_x86_elf_finish_dynamic_sections): Handle .sframe from .plt* sections. * bfd/elfxx-x86.h (PLT_SFRAME_FDE_START_OFFSET): New definition. (SFRAME_PLT0_MAX_NUM_FRES): Likewise. (SFRAME_PLTN_MAX_NUM_FRES): Likewise. (struct elf_x86_sframe_plt): New structure. (struct elf_x86_link_hash_table): New member. (struct elf_x86_init_table): New members for .sframe creation. * bfd/section.c: Add new definition SEC_INFO_TYPE_SFRAME. * binutils/readelf.c (get_segment_type): Handle new segment PT_GNU_SFRAME. * ld/ld.texi: Update documentation for --no-ld-generated-unwind-info. * ld/scripttempl/elf.sc: Support .sframe sections. * ld/Makefile.am (TESTSFRAMELIB): Use it. (check-DEJAGNU): Likewise. * ld/Makefile.in: Regenerated. * ld/configure.ac (TESTSFRAMELIB): Set to the .so or .a like TESTBFDLIB. * ld/configure: Regenerated. * bfd/elf-sframe.c: New file. include/ChangeLog: * elf/common.h (PT_GNU_SFRAME): New definition. * elf/internal.h (struct elf_segment_map): Handle new segment type PT_GNU_SFRAME. ld/testsuite/ChangeLog: * ld/testsuite/ld-bootstrap/bootstrap.exp: Add SFRAMELIB. * ld/testsuite/ld-aarch64/aarch64-elf.exp: Add new test sframe-simple-1. * ld/testsuite/ld-aarch64/sframe-bar.s: New file. * ld/testsuite/ld-aarch64/sframe-foo.s: Likewise. * ld/testsuite/ld-aarch64/sframe-simple-1.d: Likewise. * ld/testsuite/ld-sframe/sframe-empty.d: New test. * ld/testsuite/ld-sframe/sframe-empty.s: New file. * ld/testsuite/ld-sframe/sframe.exp: New testsuite. * ld/testsuite/ld-x86-64/sframe-bar.s: New file. * ld/testsuite/ld-x86-64/sframe-foo.s: Likewise. * ld/testsuite/ld-x86-64/sframe-simple-1.d: Likewise. * ld/testsuite/ld-x86-64/sframe-plt-1.d: Likewise. * ld/testsuite/ld-x86-64/sframe-simple-1.d: Likewise. * ld/testsuite/ld-x86-64/x86-64.exp: Add new tests - sframe-simple-1, sframe-plt-1. * ld/testsuite/lib/ld-lib.exp: Add new proc to check if assembler supports SFrame section. * ld/testsuite/ld-sframe/discard.d: New file. * ld/testsuite/ld-sframe/discard.ld: Likewise. * ld/testsuite/ld-sframe/discard.s: Likewise. 2022-11-15 Weimin Pan libsframe: add the SFrame library libsframe is a library that allows you to: - decode a .sframe section - probe and inspect a .sframe section - encode (and eventually write) a .sframe section. This library is currently being used by the linker, readelf, objdump. This library will also be used by the SFrame unwinder which is still to be upstream'd. The file include/sframe-api.h defines the user-facing APIs for decoding, encoding and probing .sframe sections. A set of error codes together with their error message strings are also defined. Endian flipping is performed automatically at read and write time, if cross-endianness is detected. ChangeLog: * Makefile.def: Add libsframe as new module with its dependencies. * Makefile.in: Regenerated. * binutils/Makefile.am: Add libsframe. * binutils/Makefile.in: Regenerated. * configure: Regenerated * configure.ac: Add libsframe to host_libs. * libsframe/Makefile.am: New file. * libsframe/Makefile.in: New file. * libsframe/aclocal.m4: New file. * libsframe/config.h.in: New file. * libsframe/configure: New file. * libsframe/configure.ac: New file. * libsframe/sframe-error.c: New file. * libsframe/sframe-impl.h: New file. * libsframe/sframe.c: New file. include/ChangeLog: * sframe-api.h: New file. testsuite/ChangeLog: * libsframe/testsuite/Makefile.am: New file. * libsframe/testsuite/Makefile.in: Regenerated. * libsframe/testsuite/libsframe.decode/Makefile.am: New file. * libsframe/testsuite/libsframe.decode/Makefile.in: Regenerated. * libsframe/testsuite/libsframe.decode/decode.exp: New file. * libsframe/testsuite/libsframe.encode/Makefile.am: Likewise. * libsframe/testsuite/libsframe.encode/Makefile.in: Regenerated. * libsframe/testsuite/libsframe.encode/encode.exp: New file. * libsframe/testsuite/libsframe.encode/encode-1.c: Likewise. * libsframe/testsuite/libsframe.decode/be-flipping.c: Likewise. * libsframe/testsuite/libsframe.decode/frecnt-1.c: Likewise. * libsframe/testsuite/libsframe.decode/frecnt-2.c: Likewise. * libsframe/testsuite/libsframe.decode/DATA-BE: New file. * libsframe/testsuite/libsframe.decode/DATA1: Likewise. * libsframe/testsuite/libsframe.decode/DATA2: Likewise. 2022-11-15 Indu Bhagat gas: testsuite: add new tests for SFrame unwind info Earlier these tests were in the same commit as previous which adds the support in GNU assembler to generate .sframe section from CFI directives. Splitting this out here for ease of applying and testing. ChangeLog: * gas/testsuite/gas/cfi-sframe/cfi-sframe-aarch64-1.d: New file. * gas/testsuite/gas/cfi-sframe/cfi-sframe-aarch64-1.s: Likewise. * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-1.d: Likewise. * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-1.s: Likewise. * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-2.d: Likewise. * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-2.s: Likewise. * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-3.d: Likewise. * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-3.s: Likewise. * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-4.d: Likewise. * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-4.s: Likewise. * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-5.d: Likewise. * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-5.s: Likewise. * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-6.d: Likewise. * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-6.s: Likewise. * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-7.d: Likewise. * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-7.s: Likewise. * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-8.d: Likewise. * gas/testsuite/gas/cfi-sframe/cfi-sframe-common-8.s: Likewise. * gas/testsuite/gas/cfi-sframe/cfi-sframe-x86_64-1.d: Likewise. * gas/testsuite/gas/cfi-sframe/cfi-sframe-x86_64-1.s: Likewise. * gas/testsuite/gas/cfi-sframe/cfi-sframe.exp: Likewise. * gas/testsuite/gas/cfi-sframe/common-empty-1.d: Likewise. * gas/testsuite/gas/cfi-sframe/common-empty-1.s: Likewise. * gas/testsuite/gas/cfi-sframe/common-empty-2.d: Likewise. * gas/testsuite/gas/cfi-sframe/common-empty-2.s: Likewise. * gas/testsuite/gas/cfi-sframe/common-empty-3.d: Likewise. * gas/testsuite/gas/cfi-sframe/common-empty-3.s: Likewise. * gas/testsuite/gas/cfi-sframe/common-empty-4.d: Likewise. * gas/testsuite/gas/cfi-sframe/common-empty-4.s: Likewise. 2022-11-15 Indu Bhagat gas: generate .sframe from CFI directives Currently supported for x86_64 and aarch64 only. [PS: Currently, the compiler has not been adapted to generate ".cfi_sections" with ".sframe" in it. The newly added command line option of --gsframe provides an easy way to try out .sframe support in the toolchain.] gas interprets the CFI directives to generate DWARF-based .eh_frame info. These internal DWARF structures are now consumed by gen-sframe.[ch] sub-system to, in turn, create the SFrame unwind information. These internal DWARF structures are read-only for the purpose of SFrame unwind info generation. SFrame unwind info generation does not impact .eh_frame unwind info generation. Both .eh_frame and .sframe can co-exist in an ELF file, if so desired by the user. Recall that SFrame unwind information only contains the minimal necessary information to generate backtraces and does not provide information to recover all callee-saved registers. The reason being that callee-saved registers other than FP are not needed for stack unwinding, and hence are not included in the .sframe section. Consequently, gen-sframe.[ch] only needs to interpret a subset of DWARF opcodes in gas. More details follow. [Set 1, Interpreted] The following opcodes are interpreted: - DW_CFA_advance_loc - DW_CFA_def_cfa - DW_CFA_def_cfa_register - DW_CFA_def_cfa_offset - DW_CFA_offset - DW_CFA_remember_state - DW_CFA_restore_state - DW_CFA_restore [Set 2, Bypassed] The following opcodes are acknowledged but are not necessary for generating SFrame unwind info: - DW_CFA_undefined - DW_CFA_same_value Anything else apart from the two above-mentioned sets is skipped altogether. This means that any function containing a CFI directive not in Set 1 or Set 2 above, will not have any SFrame unwind information generated for them. Holes in instructions covered by FREs of a single FDE are not representable in the SFrame unwind format. As few examples, following opcodes are not processed for .sframe generation, and are skipped: - .cfi_personality* - .cfi_*lsda - .cfi_escape - .cfi_negate_ra_state - ... Not processing .cfi_escape, .cfi_negate_ra_state will cause SFrame unwind information to be absent for SFrame FDEs that contain these CFI directives, hence affecting the asynchronicity. x86-64 and aarch64 backends need to have a few new definitions and functions for .sframe generation. These provide gas with architecture specific information like the SP/FP/RA register numbers and an SFrame-specific ABI marker. Lastly, the patch also implements an optimization for size, where specific fragments containing SFrame FRE start address and SFrame FDE function are fixed up. This is similar to other similar optimizations in gas, where fragments are sized and fixed up when the associated symbols can be resolved. This optimization is controlled by a #define SFRAME_FRE_TYPE_SELECTION_OPT and should be easy to turn off if needed. The optimization is on by default for both x86_64 and aarch64. ChangeLog: * gas/Makefile.am: Include gen-sframe.c and sframe-opt.c. * gas/Makefile.in: Regenerated. * gas/as.h (enum _relax_state): Add new state rs_sframe. (sframe_estimate_size_before_relax): New function. (sframe_relax_frag): Likewise. (sframe_convert_frag): Likewise. * gas/config/tc-aarch64.c (aarch64_support_sframe_p): New definition. (aarch64_sframe_ra_tracking_p): Likewise. (aarch64_sframe_cfa_ra_offset): Likewise. (aarch64_sframe_get_abi_arch): Likewise. (md_begin): Set values of sp/fp/ra registers. * gas/config/tc-aarch64.h (aarch64_support_sframe_p): New declaration. (support_sframe_p): Likewise. (SFRAME_CFA_SP_REG): Likewise. (SFRAME_CFA_FP_REG): Likewise. (SFRAME_CFA_RA_REG): Likewise. (aarch64_sframe_ra_tracking_p): Likewise. (sframe_ra_tracking_p): Likewise. (aarch64_sframe_cfa_ra_offset): Likewise. (sframe_cfa_ra_offset): Likewise. (aarch64_sframe_get_abi_arch): Likewise. (sframe_get_abi_arch): Likewise. * gas/config/tc-i386.c (x86_support_sframe_p): New definition. (x86_sframe_ra_tracking_p): Likewise. (x86_sframe_cfa_ra_offset): Likewise. (x86_sframe_get_abi_arch): Likewise. * gas/config/tc-i386.h (x86_support_sframe_p): New declaration. (support_sframe_p): Likewise. (SFRAME_CFA_SP_REG): Likewise. (SFRAME_CFA_FP_REG): Likewise. (x86_sframe_ra_tracking_p): Likewise. (sframe_ra_tracking_p): Likewise. (x86_sframe_cfa_ra_offset): Likewise. (sframe_cfa_ra_offset): Likewise. (x86_sframe_get_abi_arch): Likewise. (sframe_get_abi_arch): Likewise. * gas/config/tc-xtensa.c (unrelaxed_frag_max_size): Add case for rs_sframe. * gas/doc/as.texi: Add .sframe to the documentation for .cfi_sections. * gas/dw2gencfi.c (cfi_finish): Create a .sframe section. * gas/dw2gencfi.h (CFI_EMIT_sframe): New definition. * gas/write.c (cvt_frag_to_fill): Handle rs_sframe. (relax_segment): Likewise. * gas/gen-sframe.c: New file. * gas/gen-sframe.h: New file. * gas/sframe-opt.c: New file. 2022-11-15 Indu Bhagat gas: add new command line option --gsframe When --gsframe is specified, the assembler will generate a .sframe section from the CFI directives in the assembly. ChangeLog: * gas/as.c (parse_args): Parse args and set flag_gen_sframe. * gas/as.h: Introduce skeleton for --gsframe. * gas/doc/as.texi: document --gsframe. 2022-11-15 Indu Bhagat sframe.h: Add SFrame format definition The header sframe.h defines the SFrame format. The SFrame format is the Simple Frame format. It can be used to represent the minimal necessary unwind information required for backtracing. The current version supports AMD64 and AARCH64. More details of the SFrame format are included in the documentation of the header file in this patch. include/ChangeLog: * sframe.h: New file. 2022-11-15 Alan Modra Re: [gas] arm: Add support for new unwinder directive ".pacspval". * testsuite/gas/arm/ehabi-pacbti-m.d: Limit test to ELF. 2022-11-15 Alan Modra aarch64-pe can't fill 16 bytes in section .text Without commit b66e671854, this: .p2align 4 nop .p2align 3 nop results in an error when coff_frob_section attempts to pad out the section to a 16-byte boundary. Due to miscalculating the pad pattern repeat count, write.c:write_contents attempts to shove 16 bytes of padding into the remaining 4 bytes of the .text section. * config/obj-coff.c (coff_frob_section): Correct fill count. Don't pad after errors. 2022-11-15 Jose E. Marchesi gdb/configure: regenerate The commit bbaabc767a4293492817a0840819aef2768cce90 introduced an incorrect thunk for the `configure' script. This patch regenerates configure by calling autoreconf. 2022-11-15 Jose E. Marchesi gdb: use libtool in GDB_AC_CHECK_BFD The GDB_AC_CHECK_BFD macro defined in gdb/acinclude.m4 uses the AC_LINK_IFELSE autoconf macro in order to link a simple program to check features of libbfd. If libbfd's link dependencies change, it was necessary to reflect them either in the definition of the macro, or as a consequence of checking for them with an autoconf macro resulting in an addition to LIBS. This patch modifies the definition of the GDB_CHECK_BFD macro in order to use libtool to perform the test link. This makes it possible to not have to list dependencies of libbfd (which are indirect to GDB) at all. After this patch: configure:28553: checking for ELF support in BFD configure:28573: ./libtool --quiet --mode=link gcc -o conftest \ -I../../gdb/../include -I../bfd \ -I../../gdb/../bfd -g -O2 \ -L../bfd -L../libiberty conftest.c -lbfd -liberty \ -lncursesw -lm -ldl >&5 configure:28573: $? = 0 configure:28583: result: yes Tests performed: - Configure --with-system-zlib and --without-system-zlib. - Check link dependencies of installed GDB with both --enable-shared and --disable-shared. - Run installed GDB in both cases. Approved-By: Simon Marchi 2022-11-15 Tom Tromey Fix crash in ada_print_type The "varstring" paramter to ada_print_type can be null, but one spot failed to check this. This could cause a crash in some situations. As this is Ada-specific, and we've been using it internally at AdaCore for a while, I am going to push it. 2022-11-15 Tejas Joshi Add AMD znver4 processor support 2022-09-28 Tejas Joshi gas/ * config/tc-i386.c (cpu_arch): Add znver4 ARCH and rmpquery SUBARCH. (md_assemble): Expand comment before swap_operands() with rmpquery. * doc/c-i386.texi: Add znver4. * testsuite/gas/i386/arch-14-1.d: New. * testsuite/gas/i386/arch-14-1.s: New. * testsuite/gas/i386/arch-14-znver4.d: New. * testsuite/gas/i386/i386.exp: Add new znver4 test cases. * testsuite/gas/i386/rmpquery.d: New. * testsuite/gas/i386/rmpquery.s: New. * testsuite/gas/i386/x86-64-arch-4-1.d: New. * testsuite/gas/i386/x86-64-arch-4-1.s: New. * testsuite/gas/i386/x86-64-arch-4-znver4.d: New. opcodes/ * i386-dis.c (x86_64_table): Add rmpquery. * i386-gen.c (cpu_flag_init): Add CPU_ZNVER4_FLAGS and CPU_RMPQUERY_FLAGS. (cpu_flags): Add CpuRMPQUERY. * i386-opc.h (enum): Add CpuRMPQUERY. (i386_cpu_flags): Add cpurmpquery. * i386-opc.tbl: Add rmpquery insn. * i386-init.h: Re-generated. * i386-tbl.h: Re-generated. 2022-11-15 Simon Marchi gdb/testsuite: get_set_option_choices: expect \r\n after each item I get some random failures since commit 8d45c3a82a0e ("[gdb/testsuite] Set completions to unlimited in get_set_option_choices"), which can be reproduced with: $ make check-read1 TESTS="gdb.base/parse_number.exp" For instance: set architecture A^M Ambiguous item "A".^M (gdb) FAIL: gdb.base/parse_number.exp: arch=A: set architecture A The problem is the regexp in get_set_option_choices, it is possible that is only matches part of a completion result. With check-read1, that is always one letter. Fix this by expecting the \r\n at the end of the line, so we only match entire results. Use ^ in match patterns to ensure we don't miss any output. Approved-By: Tom de Vries Change-Id: Ib1733737feab7dde0f7095866e089081a891054e 2022-11-15 Andre Vieira aarch64, testsuite: Fixed recently added cssc.d Fixed wrong paste in cssc.d. gas/ChangeLog: * testsuite/gas/aarch64/cssc.d: Removed duplicate head. 2022-11-15 Tom de Vries [gdb/testsuite] Normalize gdbserver path name Currently for the target board remote-gdbserver-on-localhost we use the gdbserver file on build, using a file name which includes "/../". Fix this by using a normalized file name instead. This allows us to be more restrictive about which files REMOTE_TARGET_USERNAME can access: ... - remote_exec build "chmod go-rx $objdir/outputs" + remote_exec build "chmod go-rx $objdir" ... Tested on x86_64-linux. 2022-11-15 Tom de Vries [gdb/testsuite] Fix gdb.base/jit-elf-so.exp for remote target With test-case gdb.base/jit-elf-so.exp and target board remote-gdbserver-on-localhost (using REMOTE_TARGET_USERNAME) we run into some failures. Fix these by: - setting jit_libname with the name as returned by gdb_load_shlib - allowing the libraries to be prefixed with the remote target directory. Tested on x86_64-linux. Co-Authored-by: Ivan Tetyushkin 2022-11-15 Tom de Vries [gdb/testsuite] Fix gdb.base/jit-reader-exec.exp for remote target With test-case gdb.base/jit-reader-exec.exp and target board remote-gdbserver-on-localhost (using REMOTE_TARGET_USERNAME) we run into some failures. Fix this by adding the missing gdb_remote_download. Tested on x86_64-linux. Co-Authored-by: Ivan Tetyushkin 2022-11-15 Tom de Vries [gdb/testsuite] Fix gdb.base/info-shared.exp for remote target With test-case gdb.base/info-shared.exp and target board remote-gdbserver-on-localhost (using REMOTE_TARGET_USERNAME) we run into some failures. Fix these by adding the missing gdb_load_shlib. Tested on x86_64-linux. Co-Authored-by: Ivan Tetyushkin 2022-11-15 Tom de Vries [gdb/testsuite] Fix gdb.base/solib-vanish.exp for remote target When running test-case gdb.base/solib-vanish.exp with target board remote-gdbserver-on-localhost (using REMOTE_TARGET_USERNAME) we run into some failures. Fix these by adding the missing gdb_load_shlib. Tested on x86_64-linux. Co-Authored-by: Ivan Tetyushkin 2022-11-15 Tom de Vries [gdb/testsuite] Fix gdb.base/infcall-exec.exp for remote target When running test-case gdb.base/infcall-exec.exp with target board remote-gdbserver-on-localhost (using REMOTE_TARGET_USERNAME) we run into: ... (gdb) call (int) execlp ("$outputs/gdb.base/infcall-exec/infcall-exec2", \ "$outputs/gdb.base/infcall-exec/infcall-exec2", (char *)0)^M $1 = -1^M (gdb) FAIL: gdb.base/infcall-exec.exp: call execlp ... Fix this by using just: ... (gdb) call (int) execlp ("infcall-exec2", "infcall-exec2", (char *)0)^M ... and using putenv ("PATH=...") to allow infcall-exec to exec infcall-exec2 if it's available alongside. Also fix the exec name in the test-case, such that we can successfully run the test-case: ... $ ./outputs/gdb.base/infcall-exec/infcall-exec PATH SETTING: 'PATH=./outputs/gdb.base/infcall-exec' $ ... Tested on x86_64-linux. Co-Authored-by: Ivan Tetyushkin 2022-11-15 Tom de Vries [gdb/testsuite] Fix gdb.base/print-file-var.exp for remote target When running test-case gdb.base/print-file-var.exp with target board remote-gdbserver-on-localhost (using REMOTE_TARGET_USERNAME) we run into some failures. Fix these by using the name of a shared lib as returned by gdb_load_shlib. This required splitting up the gdb_load_shlib functionality, which is now defined as: ... proc gdb_load_shlib { file } { set dest [gdb_download_shlib $file] gdb_locate_shlib $file return $dest } ... such that we can do gdb_download_shlib before gdb is started. Tested on x86_64-linux. Co-Authored-by: Ivan Tetyushkin 2022-11-15 Tom de Vries [gdb/testsuite] Add REMOTE_TARGET_USERNAME in remote-gdbserver-on-localhost.exp As reported here ( https://sourceware.org/pipermail/gdb-patches/2022-October/193147.html ) a number of test-cases fails with a remote target setup, for instance test-case gdb.base/print-file-var.exp. So, why don't we see these fails with our remote target boards in gdb/testsuite/boards, say remote-gdbserver-on-localhost.exp? The problem is that the target board uses the same machine and user for both (by-definition-local) build and remote target, and when using absolute pathnames to refer to files on build, we can access those files on target, which in a real remote target setup wouldn't be the case: we'd have to download them to target first, and then the filename would also be different. For aforementioned test-case, this happens when the name of a shared library is passed as absolute file name to gcc: ... gcc ... -DSHLIB_NAME="$outputs/gdb.base/print-file-var/\ print-file-var-lib2-hidden0-dlopen1-version_id_main0_c.so" ... Make these problems visible with remote-gdbserver-on-localhost.exp by adding an option to specify a test account (still on the same machine) using REMOTE_TARGET_USERNAME. We make sure by restricting file permissions, that the test account cannot see the build files on the $USER account, and that the $USER account cannot see the target files on the test account. And so we can reproduce the reported fails: ... $ cd build/gdb $ tc="gdb.base/print-file-var.exp" $ tb="--target_board remote-gdbserver-on-localhost" $ tbu="REMOTE_TARGET_USERNAME=remote-target" $ make check RUNTESTFLAGS="$tb $tbu $tc" ... FAIL: gdb.base/print-file-var.exp: lang=c: hidden=0: dlopen=1: \ version_id_main=0: continue to STOP marker ... Tested on x86_64-linux. Reported-by: Ivan Tetyushkin 2022-11-15 Tom de Vries [gdb/testsuite] Fix gdb.base/info_sources_2.exp for remote target With test-case gdb.base/info_sources_2.exp and target board remote-gdbserver-on-localhost (using REMOTE_TARGET_USERNAME) we run into some failures. Fix these by adding the missing gdb_load_shlib. Tested on x86_64-linux. 2022-11-15 Tom de Vries [gdb/testsuite] Fix gdb.base/foll-exec.exp for remote target When running test-case gdb.base/foll-exec.exp with target board remote-gdbserver-on-localhost.exp, I run into: ... (gdb) PASS: gdb.base/foll-exec.exp: insert first exec catchpoint continue^M Continuing.^M [Inferior 1 (process 4476) exited normally]^M (gdb) FAIL: gdb.base/foll-exec.exp: continue to first exec catchpoint (the program e\ xited) ... The problem is that the foll-exec executable expects the exec-ed executable execd-prog alongside it, but it's missing. Fix this by adding the missing gdb_remote_download. Likewise in a few other test-cases. Tested on x86_64-linux. 2022-11-15 Tom de Vries [gdb/testssuite] Skip aarch64 in skip_gdbserver_test if no xml support On aarch64-linux, with a gdb build without libexpat, so without xml support, I run into: ... (gdb) builtin_spawn attach-no-multi-process^M attach 26808^M Attaching to Remote target^M warning: Can not parse XML target description; XML support was disabled at \ compile time^M Reading symbols from attach-no-multi-process...^M Remote 'g' packet reply is too long (expected 788 bytes, got 796 bytes): ... ^M ... The test-case checks for skip_gdbserver_tests and that one contains a check for xml support: ... # If GDB is lack of XML support, and targets, like arm, have # multiple target descriptions, GDB doesn't know which target # description GDBserver uses, and may fail to parse 'g' packet # after connection. if { [gdb_skip_xml_test] && ([istarget "arm*-*-linux*"] || [istarget "mips*-*-linux*"] || [istarget "powerpc*-*-linux*"] || [istarget "s390*-*-linux*"] || [istarget "x86_64-*-linux*"] || [istarget "i\[34567\]86-*-linux*"]) } { return 1 } ... but it doesn't trigger because aarch64 is missing. Fix this by adding istarget "aarch64*-*-linux*". Tested on aarch64-linux. Approved-By: Luis Machado 2022-11-15 Aditya Vidyadhar Kamath Enable multi-process debugging for AIX This patch adds multi-process debugging feature in AIX. Till now AIX supported debugging only one inferior at a time, now we can be able to debug multi process. Users can use set follow fork mode in child or parent and set detach on fork on or off to enable/disable simultaneous debugging of parent/child. 2022-11-15 GDB Administrator Automatic date update in version.in 2022-11-14 Carl Love PowerPC, fix support for printing the function return value for non-trivial values. Currently, a non-trivial return value from a function cannot currently be reliably determined on PowerPC. This is due to the fact that the PowerPC ABI uses register r3 to store the address of the buffer containing the non-trivial return value when the function is called. The PowerPC ABI does not guarantee the value in register r3 is not modified in the function. Thus the value in r3 cannot be reliably used to obtain the return addreses on exit from the function. This patch adds a new gdbarch method to allow PowerPC to access the value of r3 on entry to a function. On PowerPC, the new gdbarch method attempts to use the DW_OP_entry_value for the DWARF entries, when exiting the function, to determine the value of r3 on entry to the function. This requires the use of the -fvar-tracking compiler option to compile the user application thus generating the DW_OP_entry_value in the binary. The DW_OP_entry_value entries in the binary file allows GDB to resolve the DW_TAG_call_site entries. This new gdbarch method is used to get the return buffer address, in the case of a function returning a nontrivial data type, on exit from the function. The GDB function should_stop checks to see if RETURN_BUF is non-zero. By default, RETURN_BUF will be set to zero by the new gdbarch method call for all architectures except PowerPC. The get_return_value function will be used to obtain the return value on all other architectures as is currently being done if RETURN_BUF is zero. On PowerPC, the new gdbarch method will return a nonzero address in RETURN_BUF if the value can be determined. The value_at function uses the return buffer address to get the return value. This patch fixes five testcase failures in gdb.cp/non-trivial-retval.exp. The correct function return values are now reported. Note this patch is dependent on patch: "PowerPC, function ppc64_sysv_abi_return_value add missing return value convention". This patch has been tested on Power 10 and x86-64 with no regressions. 2022-11-14 Carl Love PowerPC, function ppc64_sysv_abi_return_value add missing return value convention This patch address five testcase failures in gdb.cp/non-trivial-retval.exp. The following commit resulted in the five testcases failures on PowerPC. The value returned by the function is being reported incorrectly. commit b1718fcdd1d2a5c514f8ee504ba07fb3f42b8608 Author: Andrew Burgess Date: Mon Dec 13 16:56:16 2021 +0000 gdb: on x86-64 non-trivial C++ objects are returned in memory Fixes PR gdb/28681. It was observed that after using the `finish` command an incorrect value was displayed in some cases. Specifically, this behaviour was observed on an x86-64 target. The function: enum return_value_convention ppc64_sysv_abi_return_value (struct gdbarch *gdbarch, struct value *function, struct type *valtype, struct regcache *regcache, gdb_byte *readbuf, const gdb_byte *writebuf) should return RETURN_VALUE_STRUCT_CONVENTION if the valtype->code() is TYPE_CODE_STRUCT and if the language_pass_by_reference is not trivially_copyable. This patch adds the needed code to return the value RETURN_VALUE_STRUCT_CONVENTION in this case. With this patch, the five test cases still fail but with the message "Value returned has type: A. Cannot determine contents". The PowerPC ABI stores the address of the buffer containing the function return value in register r3 on entry to the function. However, the PowerPC ABI does not guarentee that r3 will not be modified in the function. So when the function returns, the return buffer address cannot be reliably obtained from register r3. Thus the message "Cannot determine contents" is appropriate in this case. 2022-11-14 Tom Tromey Remove dump_prefix_expression Since the expression rewrite, dump_prefix_expression has been misnamed. This patch cleans this up by removing the function, turning it into a method on struct expression. 2022-11-14 Andre Vieira aarch64: Add support for Common Short Sequence Compression extension This patch adds support for the CSSC extension and its corresponding instructions: ABS, CNT, CTZ, SMAX, UMAX, SMIN, UMIN. gas/ChangeLog: * config/tc-aarch64.c (parse_operands): Handle new operand types. * doc/c-aarch64.texi: Document new extension. * testsuite/gas/aarch64/cssc.d: New test. * testsuite/gas/aarch64/cssc.s: New test. include/ChangeLog: * opcode/aarch64.h (AARCH64_FEATURE_CSSC): New feature Macro. (enum aarch64_opnd): New operand types. (enum aarch64_insn_class): New instruction class. opcodes/ChangeLog: * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. * aarch64-opc.c (operand_general_constraint_met_p): Update for new operand types. (aarch64_print_operand): Likewise. * aarch64-opc.h (enum aarch64_field_kind): Declare FLD_CSSC_imm8 field. * aarch64-tbl.h (aarch64_feature_cssc): Define new feature set. (CSSC): Define new feature set Macro. (CSSC_INSN): Define new instruction type. (aarch64_opcode_table): Add new instructions. 2022-11-14 Jan Beulich x86: fold special-operand insn attributes into a single enum Attributes which aren't used together in any single insn template can be converted from individual booleans to a single enum, as was done for a few other attributes before. This is more space efficient. Collect together all attributes which express special operand constraints (and which fit the criteria for folding). 2022-11-14 Dimitar Dimitrov pru: bfd: Correct default to no execstack Data and instruction memories are strictly separated, so it is not possible to execute instructions from the stack memory on PRU. I don't see any difference in testsuite results with or without this change. bfd/ChangeLog: * elf32-pru.c (elf_backend_default_execstack): Define as 0. ld/ChangeLog: * testsuite/ld-elf/elf.exp (target_defaults_to_execstack): Return 0 for pru. 2022-11-14 Srinath Parvathaneni [gas] arm: Add support for new unwinder directive ".pacspval". This patch adds the assembler support for the new unwinder directive ".pacspval" and encodes this directives with opcode "0xb5". This opcode indicates the unwinder to use effective vsp as modifier for PAC validation. gas/ChangeLog: 2022-11-07 Srinath Parvathaneni * doc/c-arm.texi: Document directive. * config/tc-arm.c (s_arm_unwind_pacspval): Define function. (md_pseudo_table): Add entry for pacspval directive. * testsuite/gas/arm/ehabi-pacbti-m.d: New test. * testsuite/gas/arm/ehabi-pacbti-m.s: Likewise. 2022-11-14 Srinath Parvathaneni [readelf] arm: Support for new pacbti unwind opcode 0xb5. This patch adds readelf support for decoding the exception table opcode "0xb5", which indicates to use effective vsp as modifier for PAC validation as defined by EHABI (https://github.com/ARM-software/abi-aa/releases/download/2022Q3/ehabi32.pdf Section 10.3). binutils/ChangeLog: 2022-11-07 Srinath Parvathaneni * readelf.c (decode_arm_unwind_bytecode): Add entry to decode opcode 0xb5. 2022-11-14 Tsukasa OI gdb/unittests: PR28413, suppress warnings generated by Gnulib Gnulib generates a warning if the system version of certain functions are used (to redirect the developer to use Gnulib version). It caused a compiler error when... - Compiled with Clang - -Werror is specified (by default) - C++ standard used by Clang is before C++17 (by default as of 15.0.0) when this unit test is activated. This issue is raised as PR28413. However, previous proposal to fix this issue (a "fix" to Gnulib): was rejected because it ruins the intent of Gnulib warnings. So, we need a Binutils/GDB-side solution. This commit tries to address this issue on the GDB side. We have "include/diagnostics.h" to disable certain warnings only when necessary. This commit suppresses the Gnulib warnings by surrounding entire #include block with DIAGNOSTIC_IGNORE_USER_DEFINED_WARNINGS to disable Gnulib- generated warnings on all standard C++ header files. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28413 Approved-By: Simon Marchi Change-Id: Ieeb5a31a6902808d4c7263a2868ae19a35e0ccaa 2022-11-14 Srinath Parvathaneni arm: Add support for Cortex-X1C CPU. This patch adds support for Cortex-X1C CPU in Arm. bfd/ChangeLog: 2022-11-09 Srinath Parvathaneni * cpu-arm.c (processors): Add Cortex-X1C CPU entry. gas/ChangeLog: 2022-11-09 Srinath Parvathaneni * NEWS: Update docs. * config/tc-arm.c (arm_cpus): Add cortex-x1c to -mcpu. * doc/c-arm.texi: Update docs. * testsuite/gas/arm/cpu-cortex-x1c.d: New test. 2022-11-14 Tom de Vries [gdb/testsuite] Run gdb.arch/ppc64-symtab-cordic.exp for --enable-targets=all While looking at test-case gdb.arch/ppc64-symtab-cordic.exp I realized that the test-case is too restrictive here: ... if {![istarget "powerpc*"] || ![is_lp64_target]} { verbose "Skipping powerpc64 separate debug file symtab test." return } ... and can also be run on x86_64-linux, if "set arch powerpc:common64" is supported, which is the case if we've build gdb with --enable-targets=all. Fix this by instead checking if powerpc:common64 is in the completion list for "set arch". This allows us to remove the 'untested "powerpc:common64 is not supported"'. While we're at it, clean up the test-case by using clean_restart. Tested on x86_64-linux. 2022-11-14 Tom de Vries [gdb/testsuite] Handle with_set arch I realized that the more irregular output of show arch: ... (gdb) show arch^M The target architecture is set to "auto" (currently "i386").^M ... would be a problem for something like: ... with_set arch powerpc:common64 {} ... and indeed: ... (gdb) set arch powerpc:common64^M The target architecture is set to "powerpc:common64".^M (gdb) FAIL: gdb.base/foo.exp: set arch powerpc:common64 ... and: ... (gdb) set arch set to "auto" (currently "i386")^M Undefined item: "set".^M ... Fix this in with_set by handling this type of output. Tested on x86_64-linux. 2022-11-14 Tom de Vries [gdb/testsuite] Set completions to unlimited in get_set_option_choices In some test-case I tried to use get_set_option_choices "set architecture" and ran into max-completions: ... set architecture simple^M set architecture tomcat^M set architecture xscale^M set architecture *** List may be truncated, max-completions reached. ***^M (gdb) PASS: gdb.base/foo.exp: complete set architecture ... There's only one test-case using this currently: gdb.base/parse_number.exp, and it locally sets max-completions to unlimited. Fix this by: - factoring out a new proc with_set out of proc with_complaints, and - using it to temporarily set max-completions to unlimited in get_set_option_choice. Tested on x86_64-linux, by running test-cases that excercise get_set_option_choice and with_complaints. 2022-11-14 Alan Modra Re: objcopy renaming section with explicit flags For now, xfail the new test. Some header/aux-header rewriting is required at the very least. * testsuite/binutils-all/rename-section-01.d: xfail xcoff. 2022-11-14 Alan Modra objcopy renaming section with explicit flags This tidies SEC_RELOC handling in bfd, in the process fixing a bug with objcopy when renaming sections. bfd/ * reloc.c (_bfd_generic_set_reloc): Set/clear SEC_RELOC depending on reloc count. * elf64-sparc.c (elf64_sparc_set_reloc): Likewise. binutils/ * objcopy.c (copy_relocations_in_section): Remove now unnecessary clearing of SEC_RELOC. * testsuite/binutils-all/rename-section-01.d: New test. * testsuite/binutils-all/objcopy.exp: Run it. gas/ * write.c (size_seg): Remove unneccesary twiddle of SEC_RELOC. (write_relocs): Likewise. Always call bfd_set_reloc. 2022-11-14 GDB Administrator Automatic date update in version.in 2022-11-13 Jon Turney Fix Cygwin build after 02d04eac Commit 02d04eac "Use strwinerror in gdb/windows-nat.c" also moves strwinerror() under the USE_WIN32API conditional, which is not defined for Cygwin (and looks like it shouldn't be, as appears to imply non-POSIX and MiNGW and WinSock...) Also enable the declaration and definition of strwinerror() when __CYGWIN__ is defined. 2022-11-13 Jon Turney Drop apparently unneeded include of winsock2.h Commit d08bae3d ("Implement target async for Windows") unconditionally includes winsock2.h. We don't want to do that on Cygwin, since including both winsock2.h and sys/select.h causes incompatible redefinition problems. Since that include is apparently unneeded, just drop it. Fixes: d08bae3d 2022-11-13 GDB Administrator Automatic date update in version.in 2022-11-12 Dimitar Dimitrov sim: pru: Fix behaviour when loop count is zero If the counter for LOOP instruction is provided by a register with value zero, then the instruction must cause a PC jump directly to the loop end. But in that particular case simulator must not initialize its internal loop variables, because loop body will not be executed. Instead, simulator must obtain the loop's end address directly from the LOOP instruction. 2022-11-12 Alan Modra PowerPC64 paddi -Mraw On a testcase like pla 8,foo@pcrel disassembled with -Mpower10 results in 0: 00 00 10 06 pla r8,0 # 0 4: 00 00 00 39 0: R_PPC64_PCREL34 foo but with -Mpower10 -Mraw 0: 00 00 10 06 .long 0x6100000 0: R_PPC64_PCREL34 foo 4: 00 00 00 39 addi r8,0,0 The instruction is unrecognised due to the hack we have in extract_pcrel0 in order to disassemble paddi with RA0=0 and R=1 as pla. I could have just added "&& !(dialect & PPC_OPCODE_RAW)" to the condition in extract_pcrel0 under which *invalid is set, but went for this larger patch that reorders the extended insn pla to the more usual place before its underlying machine insn. (la is after addi because we never disassemble to la.) gas/ * testsuite/gas/ppc/raw.d, * testsuite/gas/ppc/raw.s: Add pla. opcodes/ * ppc-opc.c (extract_pcrel1): Rename from extract_pcrel0 and invert *invalid logic. (PCREL1): Rename from PCREL0. (prefix_opcodes): Sort pla before paddi, adjusting R operand for pla, paddi and psubi. 2022-11-12 Indu Bhagat libctf: use libtool for link test in configure The configure check for ELF support in BFD uses the AC_TRY_LINK. If libbfd's dependencies change, this macro will need to be updated manually with explicit additions to LDFLAGS and LIBS. This patch updates the check to use libtool instead. ChangeLog: * libctf/configure.ac: Use libtool instead. * libctf/configure: Regenerated. 2022-11-12 GDB Administrator Automatic date update in version.in 2022-11-11 Simon Marchi gdb: fix start breakpoint expression not working in some languages Commit 0be837be9fb4 ("gdb: make "start" breakpoint inferior-specific") regresses gdb.ada/start.exp: (gdb) start Error in expression, near `1'. (gdb) UNTESTED: gdb.ada/start.exp: start failed to land inside the right procedure This is because in Ada, the equality operator is =, not ==. I checked the other languages supported by GDB, these other languages use = for equality: - Pascal: tests like gdb.pascal/hello.exp are affected too - Modula-2: I tried building a Modula-2 hello world using gm2, but it seems like the generated DWARF doesn't specify the Modula-2 language in the CUs, it's C++ and C, so the selected language isn't "modula-2". But if I manually do "set language modula-2" on a dummy program and then "start", I get the same error. Other languages all use ==. So, a short term fix would be to use = or == in the expression, based on the current language. If this was meant to be permanent, I would suggest adding something like an "equality_operator" method to language_defn, that returns the right equality operator for the language. But the goal is to replace all this with proper inferior-specific breakpoints, so I hope all this is temporary. Approved-By: Tom de Vries Change-Id: Id4d38e14a80e6bbbb1ad2b2277f974dd55192969 2022-11-11 Mike Frysinger sim: igen: cleanup archaic pointer-to-long printf casts Use proper %p to printf a pointer instead of casting it to long and using 0x%lx. It's cleaner, more correct, and doesn't break on LLP64. 2022-11-11 Tom de Vries [gdb/testsuite] Don't timeout on prompt in gdb_start_cmd We're currently running into a timeout at: ... (gdb) start ^M Error in expression, near `1'.^M (gdb) UNTESTED: gdb.ada/start.exp: start failed to land inside the right \ procedure ... due to the fact that gdb_start_cmd doesn't handle a prompt as reaction to the start command. Fix this by handling the prompt. Reduces execution time of the test-case from 1m1s to 1s. Tested on x86_64-linux. 2022-11-11 Tom de Vries [gdb/testsuite] Better error checking in has_hw_wp_support With gdb 12.1, on powerpc64le I ran into ERRORs related to has_hw_wp_support usage, which was already fixed on trunk by commits: - 13f72372413 ("gdb/testsuite: fix gdb.base/break-idempotent.exp on ppc"), and - 01a32ee0b8c ("PowerPC, fix gdb.base/watchpoint.exp on Power 9") While looking into these ERRORs and the commits that fix them, it occurred to me that while the commits fix the root cause, the failure mode is not great. The test-cases expect a running instance of gdb upon return, which is not there, so there's an long stream of ERRORs generated as a result. Fix this at the start of has_hw_wp_support, by (instead of accomodating a running gdb instance by calling gdb_exit), checking whether it's called without a running gdb instance, and erroring out otherwise. This way, there's just one error. I also noticed that in case we do an early exit due to !runto_main, we don't clean up, so copy the missing cleanups (gdb_exit and $obj file deletion) from the regular exit. Tested on x86_64-linux, using has_hw_wp_support for x86_64 in skip_hw_watchpoint_tests. 2022-11-11 Lancelot SIX gdb/py-inferior: Keep inferior threads in a map The python code maintains a list of threads for each inferior. This list is implemented as a linked list. When the number of threads grows high, this implementation can begin to be a performance bottleneck as finding a particular thread_object in the list has a complexity of O(N). We see this in ROCgdb[1], a downstream port of GDB for AMDGUP. On AMDGPU devices, the number of threads can get significantly higher than on usual GDB workloads. In some situations, we can reach the end of the inferior process with GDB still having a substantial list of known threads. While running target_mourn_inferior, we end up in inferior::clear_thread_list which iterates over all remaining threads and marks each thread exited. This fires the gdb::observers::thread_exit observer and eventually py-inferior.c:set_thread_exited gets called. This function searches in the linked list with poor performances. This patch proposes to change the linked list that keeps the per inferior_object list of thread_objects into a std::unordered_map. This allows to have the search operation complexity be O(1) on average instead of O(N). With this patch, we can complete clear_thread_list in about 2.5 seconds compared to 10 minutes without it. Except for the performance change, no user visible change is expected. Regression tested on Ubuntu-22.04 x86_64. [1] https://github.com/ROCm-Developer-Tools/ROCgdb 2022-11-11 Luis Machado Make sure a copy_insn_closure is available when we have a match in copy_insn_closure_by_addr PR gdb/29272 Investigating PR29272, it was mentioned a particular test used to work on GDB 10, but it started failing with GDB 11 onwards. I tracked it down to some displaced stepping improvements on commit 187b041e2514827b9d86190ed2471c4c7a352874. In particular, one of the corner cases using copy_insn_closure_by_addr got silently broken. It is hard to spot because it doesn't have any good tests for it, and the situation is quite specific to the Arm target. Essentially, the change from the displaced stepping improvements made it so we could still invoke copy_insn_closure_by_addr correctly to return the pointer to a copy_insn_closure, but it always returned nullptr due to the order of the statements in displaced_step_buffer::prepare. The way it is now, we first write the address of the displaced step buffer to PC and then save the copy_insn_closure pointer. The problem is that writing to PC for the Arm target requires figuring out if the new PC is thumb mode or not. With no copy_insn_closure data, the logic to determine the thumb mode during displaced stepping doesn't work, and gives random results that are difficult to track (SIGILL, SIGSEGV etc). Fix this by reordering the PC write in displaced_step_buffer::prepare and, for safety, add an assertion to displaced_step_buffer::copy_insn_closure_by_addr so GDB stops right when it sees this invalid situation. If this gets broken again in the future, it will be easier to spot. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29272 Approved-By: Simon Marchi 2022-11-11 Felix Willgerodt gdb, btrace: Fix rn-dl-bind.exp for new icx remark. When running the test with the latest Intel compiler: Running gdb/gdb/testsuite/gdb.btrace/rn-dl-bind.exp ... gdb compile failed, icpx: warning: treating 'c' input as 'c++' when in C++ mode, this behavior is deprecated [-Wdeprecated] The test doesn't seem to test something specifically for C++, so I removed the C++ compilation option. Alternatively we could rename rn-dl-bind.exp.c to rn-dl-bind.exp.cc. 2022-11-11 Bruno Larsen gdb/testsuite: disable gdb.cp/call-method-register.exp when not using gcc The test gdb.cp/call-method-register.exp assumes that the class will be placed on a register. However, this keyword has been deprecated since C++11, and Clang, for instance, does not feel the need to follow it. Since this test is not usable without this working, this commit marks this test as untested. Approved-by: Tom Tromey 2022-11-11 Bruno Larsen gdb/testsuite: remove XFAIL on gdb.cp/temargs.exp gdb.cp/temargs.exp last 2 tests always setup an XFAILs, despite checking for old gcc versions. However, Clang does not fail in this test, turning into XPASSes and slighty annoying when comparing between compilers. To change this, make the xfails only happen if we using gcc. Approved-by: Tom Tromey 2022-11-11 Bruno Larsen gdb/testsuite: disable some tests of gdb.cp/typeid.exp when using Clang Since Clang chooses to not add any debug information for base types, expecting it to be included with libraries' informations, gdb.cp/typeid.exp will always fail if the program hasn't started. This commit fixes that by making it so when using Clang, the base type variables aren't tested. Approved-by: Tom Tromey 2022-11-11 Bruno Larsen gdb/testsuite: skip gdb.cp/anon-struct.exp when using Clang When Clang compiles anonymous structures, it does not add linkage names in their dwarf representations. This is compounded by Clang not adding linkage names to subprograms of those anonymous structs (for instance, the constructor). With these 2 things together, GDB is unable to refer to any of them, so there is no way to pass any of the tests of gdb.cp/anon-struct.exp Since this isn't a bug on Clang or GDB according to the DWARF specifications as DW_AT_name is optional for all DIEs, the test was marked as untested. Since I was already touching the file, I also added a comment at the top of the file explaining what it is testing for. Approved-by: Tom Tromey 2022-11-11 Bruno Larsen gdb/testsuite: allow for Clang style destructors on gdb.cp/m-static.exp when running gdb.cp/m-static.exp using Clang, we get the following failures: print test1.~gnu_obj_1^M $6 = {void (gnu_obj_1 * const)} 0x555555555470 ^M (gdb) FAIL: gdb.cp/m-static.exp: simple object instance, print destructor ptype test1.~gnu_obj_1^M type = void (gnu_obj_1 * const)^M (gdb) FAIL: gdb.cp/m-static.exp: simple object instance, ptype destructor print test1.'~gnu_obj_1'^M $7 = {void (gnu_obj_1 * const)} 0x555555555470 ^M (gdb) FAIL: gdb.cp/m-static.exp: simple object instance, print quoted destructor This is because the test is expecting an extra integer parameter on the destructor. Looking at the debuginfo, it seems that there is nothing actually wrong with this output, so these tests were changed to test multiple possible regexps. Approved-by: Tom Tromey 2022-11-11 Bruno Larsen gdb/testsuite: add XFAIL to gdb.cp/derivation.exp when using Clang When running gdb.cp/derivation.exp using Clang, we get an unexpected failure when printing the type of a class with an internal typedef. This happens because Clang doesn't add accessibility information for typedefs inside classes (see https://github.com/llvm/llvm-project/issues/57608 for more info). To help with Clang testing, an XFAIL was added to this test. Approved-by: Tom Tromey 2022-11-11 Bruno Larsen gdb/testsuite: account for clang's nested destructor calls on gdb.cp/mb-ctor.exp When compiling virtual classes's destructors, two versions are compiled, one with a single parameter (this) and the other with 2 parameters (this and vtt). GCC's compilation makes it so either the version with 1 parameter or the one with 2 parameters is called, depending on whether the destructor is being called by the class itself or by an inherited class. On the test gdb.cp/mb-ctor.exp, this means that the breakpoint set at the destructor will be hit 4 times. Clang, on the other hand, makes the single-parameter version call the 2 parameter version, probably in an attempt to reduce the size of the resulting executable. This means that the gdb.cp/mb-ctor.exp will hit 6 breakpoints before finishing, and is the reason why this test was failing. To make this test stop failing, a compiler check is added and another "continue" instruction is issued to account for this difference. Approved-by: Tom Tromey 2022-11-11 Bruno Larsen gdb/testsuite: enable running gdb.cp/classes.exp with clang When attempting to run the gdb.cp/classes.exp test using Clang++, the test fails to prepare with -Wnon-c-typedef-for-linkage like the previously fixed gdb.cp/class2.exp. Upon fixing this, the test shows 5 unexpected failures. One such failures is: ptype/r class class_with_public_typedef type = class class_with_public_typedef { private: int a; public: class_with_public_typedef::INT b; private: typedef int INT; } (gdb) FAIL: gdb.cp/classes.exp: ptype class class_with_public_typedef // wrong access specifier for typedef: private While g++ provided the following output: ptype/r class class_with_public_typedef type = class class_with_public_typedef { private: int a; public: class_with_public_typedef::INT b; typedef int INT; } (gdb) PASS: gdb.cp/classes.exp: ptype class class_with_public_typedef This error happens because Clang does not add DW_AT_accessibility to typedefs inside classes, and without this information GDB defaults to assuming the typedef is private. Since there is nothing that GDB can do about this, these tests have been set as xfails, and Clang bug 57608 has been filed. Bug: https://github.com/llvm/llvm-project/issues/57608 Approved-by: Tom Tromey 2022-11-11 Bruno Larsen gdb/testsuite: ignore Non-C-typedefs for gdb.cp/class2.exp When attempting to test gdb.cp/class2.exp using Clang, it fails to prepare with the following error: Executing on host: clang++ -fdiagnostics-color=never -Wno-unknown-warning-option -c -g -o /home/blarsen/Documents/fsf_build/gdb/testsuite/outputs/gdb.cp/class2/class20.o /home/blarsen/Documents/fsf_build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.cp/class2.cc (timeout = 300) builtin_spawn -ignore SIGHUP clang++ -fdiagnostics-color=never -Wno-unknown-warning-option -c -g -o /home/blarsen/Documents/fsf_build/gdb/testsuite/outputs/gdb.cp/class2/class20.o /home/blarsen/Documents/fsf_build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.cp/class2.cc /home/blarsen/Documents/fsf_build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.cp/class2.cc:53:14: warning: anonymous non-C-compatible type given name for linkage purposes by typedef declaration; add a tag name here [-Wnon-c-typedef-for-linkage] typedef class { ^ Dbase /home/blarsen/Documents/fsf_build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.cp/class2.cc:54:2: note: type is not C-compatible due to this member declaration public: ^~~~~~~ /home/blarsen/Documents/fsf_build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.cp/class2.cc:58:3: note: type is given name 'Dbase' for linkage purposes by this typedef declaration } Dbase; ^ 1 warning generated. gdb compile failed, /home/blarsen/Documents/fsf_build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.cp/class2.cc:53:14: warning: anonymous non-C-compatible type given name for linkage purposes by typedef declaration; add a tag name here [-Wnon-c-typedef-for-linkage] typedef class { ^ Dbase /home/blarsen/Documents/fsf_build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.cp/class2.cc:54:2: note: type is not C-compatible due to this member declaration public: ^~~~~~~ /home/blarsen/Documents/fsf_build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.cp/class2.cc:58:3: note: type is given name 'Dbase' for linkage purposes by this typedef declaration } Dbase; ^ 1 warning generated. UNTESTED: gdb.cp/class2.exp: failed to prepare This can be silenced by adding -Wno-non-c-typedef-for-linkage for Clang 11 or later. The test shows no failures with this change. Approved-by: Tom Tromey 2022-11-11 Jan Beulich gas: accept custom ".linefile ." While .linefile is generally intended for gas internal use only, its use in a source file would better not result in an internal error. Give use of it outside of any macro(-like) construct the meaning of restoring the original (physical) input file name. x86: drop stray IsString from PadLock insns The need for IsString on the PadLock insns went away with the introduction of RepPrefixOk. Drop these leftovers. x86: drop duplicate sse4a entry from cpu_arch[] Of the two instances the first is correct in using ANY_SSE4A as 3rd argument to SUBARCH(), so drop the wrong/redundant/dead 2nd one. 2022-11-11 Alan Modra PR28834, PR26946 sanity checking section size This patch provides a new function to sanity check section sizes. It's mostly extracted from what we had in bfd_get_full_section_contents but also handles compressed debug sections. Improvements are: - section file offset is taken into account, - added checks that a compressed section can be read from file. The function is then used when handling multiple .debug_* sections that need to be read into a single buffer, to sanity check sizes before allocating the buffer. PR 26946, PR 28834 * Makefile.am (LIBBFD_H_FILES): Add section.c. * compress.c (bfd_get_full_section_contents): Move section size sanity checks.. * section.c (_bfd_section_size_insane): ..to here. New function. * dwarf2.c (read_section): Use _bfd_section_size_insane. (_bfd_dwarf2_slurp_debug_info): Likewise. * Makefile.in: Regenerate. * libbfd.h: Regenerate. 2022-11-11 Alan Modra Sanity check SHT_MIPS_OPTIONS size * elfxx-mips.c (_bfd_mips_elf_section_from_shdr): Use bfd_malloc_and_get_section to read contents of .MIPS.options. Re: gold: add --compress-debug-sections=zstd [PR 29641] Fix the following: compressed_output.cc:86:8: error: assignment of read-only variable ‘size’ 86 | size = ZSTD_compress(*compressed_data + header_size, size, uncompressed_data, 2022-11-11 Fangrui Song gold: add --compress-debug-sections=zstd [PR 29641] This option compresses output debug sections with zstd and sets ch_type to ELFCOMPRESS_ZSTD. Latest gdb and lldb support ELFCOMPRESS_ZSTD. There will be an error if zstd is not enabled at configure time. error: --compress-debug-sections=zstd: gold is not built with zstd support 2022-11-11 Fangrui Song gold, dwp: support zstd compressed input debug sections [PR 29641] This feature is enabled if config/zstd.m4 uses zstd. 2022-11-11 Vladimir Mezentsev gprofng: fix typo in configure.ac gprofng/ChangeLog 2022-11-10 Vladimir Mezentsev * configure.ac: Fix typo in redirect operator. * configure: Rebuild. 2022-11-11 Vladislav Khmelevsky Fix adrp distance check gold/ * aarch64.cc (aarch64_valid_for_adrp_p): Shift offset as a signed number. 2022-11-11 GDB Administrator Automatic date update in version.in 2022-11-10 Mike Frysinger sim: v850: rename v850.dc to align with other ports Other arches use the .dc extension for the instruction decode table. sim: igen: fix hang when decoding boolean rule constants The parser for boolean rules fails to skip over the , separator in the options which makes it hang forever. No dc files in the tree use boolean rules atm which is why no one noticed. sim: igen: mark error func as noreturn since it exits sim: igen: mark output funcs with printf attribute ... and fix the legitimate bug that it catches. sim: igen: constify various func arguments sim: ppc: rename ppc-instructions to powerpc.igen To make it clear this is an input to the igen tool, rename it with an igen extension. This matches the other files in the ppc dir (altivec & e500 igen files), and the other igen ports (mips, mn10300, v850). 2022-11-10 H.J. Lu i386: Check invalid (%dx) usage (%dx) isn't a valid memory address in any modes. It is used as a special memory operand for input/output port address in AT&T syntax and should only be used with input/output instructions. Update i386_att_operand to set i.input_output_operand to true for (%dx) and issue an error if (%dx) is used with non-input/output instructions. PR gas/29751 * config/tc-i386.c (_i386_insn): Add input_output_operand. (md_assemble): Issue an error if input/output memory operand is used with non-input/output instructions. (i386_att_operand): Set i.input_output_operand to true for (%dx). * testsuite/gas/i386/inval.l: Updated. * testsuite/gas/i386/x86-64-inval.l: Likewise. * testsuite/gas/i386/inval.s: Add tests for invalid (%dx) usage. * testsuite/gas/i386/x86-64-inval.s: Likewise. 2022-11-10 Simon Marchi gdb: make "start" breakpoint inferior-specific I saw this failure on a CI: (gdb) add-inferior [New inferior 2] Added inferior 2 (gdb) PASS: gdb.threads/vfork-multi-inferior.exp: method=non-stop: add-inferior inferior 2 [Switching to inferior 2 [] ()] (gdb) PASS: gdb.threads/vfork-multi-inferior.exp: method=non-stop: inferior 2 kill The program is not being run. (gdb) file /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/tmp/tmp.GYATAXR8Ku/gdb/testsuite/outputs/gdb.threads/vfork-multi-inferior/vfork-multi-inferior-sleep Reading symbols from /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/tmp/tmp.GYATAXR8Ku/gdb/testsuite/outputs/gdb.threads/vfork-multi-inferior/vfork-multi-inferior-sleep... (gdb) run & Starting program: /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/tmp/tmp.GYATAXR8Ku/gdb/testsuite/outputs/gdb.threads/vfork-multi-inferior/vfork-multi-inferior-sleep (gdb) PASS: gdb.threads/vfork-multi-inferior.exp: method=non-stop: run inferior 2 inferior 1 [Switching to inferior 1 [] ()] (gdb) PASS: gdb.threads/vfork-multi-inferior.exp: method=non-stop: inferior 1 kill The program is not being run. (gdb) file /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/tmp/tmp.GYATAXR8Ku/gdb/testsuite/outputs/gdb.threads/vfork-multi-inferior/vfork-multi-inferior Reading symbols from /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/tmp/tmp.GYATAXR8Ku/gdb/testsuite/outputs/gdb.threads/vfork-multi-inferior/vfork-multi-inferior... (gdb) break should_break_here Breakpoint 1 at 0x11b1: file /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/src/binutils-gdb/gdb/testsuite/gdb.threads/vfork-multi-inferior.c, line 25. (gdb) PASS: gdb.threads/vfork-multi-inferior.exp: method=non-stop: break should_break_here [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". start Temporary breakpoint 2 at 0x11c0: -qualified main. (2 locations) Starting program: /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/tmp/tmp.GYATAXR8Ku/gdb/testsuite/outputs/gdb.threads/vfork-multi-inferior/vfork-multi-inferior [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Thread 2.1 "vfork-multi-inf" hit Temporary breakpoint 2, main () at /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/src/binutils-gdb/gdb/testsuite/gdb.threads/vfork-multi-inferior-sleep.c:23 23 sleep (30); (gdb) FAIL: gdb.threads/vfork-multi-inferior.exp: method=non-stop: start inferior 1 What happens is: 1. We start inferior 2 with "run&", it runs very slowly, takes time to get to main 2. We switch to inferior 1, and run "start" 3. The temporary breakpoint inserted by "start" applies to all inferiors 4. Inferior 2 hits that breakpoint and GDB reports that hit To avoid this, breakpoints inserted by "start" should be inferior-specific. However, we don't have a nice way to make inferior-specific breakpoints yet. It's possible to make pspace-specific breakpoints (for example how the internal_breakpoint constructor does) by creating a symtab_and_line manually. However, inferiors can share program spaces (usually on particular embedded targets), so we could have a situation where two inferiors run the same code in the same program space. In that case, it would just not be possible to insert a breakpoint in one inferior but not the other. A simple solution that should work all the time is to add a condition to the breakpoint inserted by "start", to check the inferior reporting the hit is the expected one. This is what this patch implements. Add a test that does: - start in background inferior 1 that sleeps before reaching its main function (using a sleep in a global C++ object's constructor) - start inferior 2 with the "start" command, which also sleeps before reaching its main function - validate that we hit the breakpoint in inferior 2 Without the fix, we hit the breakpoint in inferior 1 pretty much all the time. There could be some unfortunate scheduling causing the test not to catch the bug, for instance if the scheduler decides not to schedule inferior 1 for a long time, but it would be really rare. If the bug is re-introduced, the test will catch it much more often than not, so it will be noticed. Reviewed-By: Bruno Larsen Approved-By: Pedro Alves Change-Id: Ib0148498a476bfa634ed62353c95f163623c686a 2022-11-10 Bruno Larsen gdb: Fix regressions caused by 041de3d73aa121f2ff0c077213598963bfb34b79 Commit 041de3d73aa changed the output format of all error messages when GDB couldn't determine a compatible overload for a given function, but it was only supposed to change if the failure happened due to incomplete types. This commit removes the stray . that was added 2022-11-10 Aaron Merey gdb/debuginfod: Improve progress updates If the download size is known, a progress bar is displayed along with the percentage of completion and the total download size. Downloading separate debug info for /lib/libxyz.so [############ ] 25% (10.01 M) If the download size is not known, a progress indicator is displayed with a ticker ("###") that moves across the screen at a rate of 1 tick every 0.5 seconds. Downloading separate debug info for /lib/libxyz.so [ ### ] If the output stream is not a tty, batch mode is enabled, the screen is too narrow or width has been set to 'unlimited', then only a static description of the download is printed. No bar or ticker is displayed. Downloading separate debug info for /lib/libxyz.so... In any case, if the size of the download is known at the time the description is printed then it will be included in the description. Downloading 10.01 MB separate debug info for /lib/libxyz.so... 2022-11-10 Simon Marchi gdb: add special handling for frame level 0 in frame_info_ptr I noticed this problem while preparing the initial submission for the ROCm GDB port. One particularity of this patch set is that it does not support unwinding frames, that requires support of some DWARF extensions that will come later. It was still possible to run to a breakpoint and print frame #0, though. When rebasing on top of the frame_info_ptr work, GDB started tripping on a prepare_reinflate call, making it not possible anymore to event print the frame when stopping on a breakpoint. One thing to know about frame 0 is that its id is lazily computed when something requests it through get_frame_id. See: https://gitlab.com/gnutools/binutils-gdb/-/blob/23912acd402f5af9caf91b257e5209ec4c58a09c/gdb/frame.c#L2070-2080 So, up to that prepare_reinflate call, frame 0's id was not computed, and prepare_reinflate, calling get_frame_id, forces it to be computed. Computing the frame id generally requires unwinding the previous frame, which with my ROCm GDB patch fails. An exception is thrown and the printing of the frame is simply abandonned. Regardless of this ROCm GDB problem (which is admittedly temporary, it will be possible to unwind with subsequent patches), we want to avoid prepare_reinflate to force the computing of the frame id, for the same reasons we lazily compute it in the first place. In addition, frame 0's id is subject to change across a frame cache reset. This is why save_selected_frame and restore_selected_frame have special handling for frame 0: https://gitlab.com/gnutools/binutils-gdb/-/blob/23912acd402f5af9caf91b257e5209ec4c58a09c/gdb/frame.c#L1841-1863 For this last reason, we also need to handle frame 0 specially in prepare_reinflate / reinflate. Because the frame id of frame 0 can change across a frame cache reset, we must not rely on the frame id from that frame to reinflate it. We should instead just re-fetch the current frame at that point. This patch adds a frame_info_ptr::m_cached_level field, set in frame_info_ptr::prepare_reinflate, so we can tell if a frame is frame 0. There are cases where a frame_info_ptr object wraps a sentinel frame, for which frame_relative_level returns -1, so I have chosen the value -2 to represent "invalid frame level", for when the frame_info_ptr object is empty. In frame_info_ptr::prepare_reinflate, only cache the frame id if the frame level is not 0. It's fine to cache the frame id for the sentinel frame, it will be properly handled by frame_find_by_id later. In frame_info_ptr::reinflate, if the frame level is 0, call get_current_frame to get the target's current frame. Otherwise, use frame_find_by_id just as before. This patch should not have user-visible changes with upstream GDB. But it will avoid forcing the computation of frame 0's when calling prepare_reinflate. And, well, it fixes the upcoming ROCm GDB patch series. Change-Id: I176ed7ee9317ddbb190acee8366e087e08e4d266 Reviewed-By: Bruno Larsen 2022-11-10 Simon Marchi gdb: add missing prepare_reinflate call in print_frame_info print_frame_info calls frame_info_ptr::reinflate, but not frame_info_ptr::prepare_reinflate, add the call to prepare_reinflate. It works right now, because all callers of print_frame_info that could possibly lead to the pretty printers being called, and the frame_info objects being invalidated, do call prepare_reinflate themselves. And since the cached frame id is copied when passing a frame_info_ptr by value, print_frame_info does have a cached frame id on entry. So technically, this change isn't needed. But I don't think it's good for a function to rely on its callers to have called prepare_reinflate, if it intends to call reinflate. Change-Id: Ie332b2d5479aef46f83fdc1120c7c83f4e84d1b0 Reviewed-By: Bruno Larsen 2022-11-10 Simon Marchi gdb: use frame_id_p instead of comparing to null_frame_id in frame_info_ptr::reinflate The assertion gdb_assert (m_cached_id != null_frame_id); is always true, as comparing equal to null_frame_id is always false (it's the first case in frame_id::operator==, not sure why it's not this way, but that's what it is). Replace the comparison with a call to frame_id_p. Approved-By: Tom Tromey Change-Id: I93986e6a85ac56353690792552e5b3b4cedec7fb 2022-11-10 Simon Marchi gdb: remove manual frame_info reinflation code in backtrace_command_1 With the following patch applied (gdb: use frame_id_p instead of comparing to null_frame_id in frame_info_ptr::reinflate), I would get: $ ./gdb -q -nx --data-directory=data-directory testsuite/outputs/gdb.base/bt-selected-frame/bt-selected-frame -ex "b breakpt" -ex r -ex "bt full" Reading symbols from testsuite/outputs/gdb.base/bt-selected-frame/bt-selected-frame... Breakpoint 1 at 0x1131: file /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.base/bt-selected-frame.c, line 22. Starting program: /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/bt-selected-frame/bt-selected-frame [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Breakpoint 1, breakpt () at /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.base/bt-selected-frame.c:22 22 } #0 breakpt () at /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.base/bt-selected-frame.c:22 No locals. /home/smarchi/src/binutils-gdb/gdb/frame-info.c:42: internal-error: reinflate: Assertion `frame_id_p (m_cached_id)' failed. This is because the code in backtrace_command_1 to manually reinflate `fi` steps overs frame_info_ptr's toes. When calling fi.prepare_reinflate (); `fi` gets properly filled with the cached frame id. But when this happens: fi = frame_find_by_id (frame_id); `fi` gets replaced by a brand new frame_info_ptr that doesn't have a cached frame id. Then this is called without a cached frame id: fi.reinflate (); That doesn't cause any problem currently, since - the gdb_assert in the reinflate method doesn't actually do anything (the following patch fixes that) - `fi.m_ptr` will always be non-nullptr, since we just got it from frame_find_by_id, so reinflate will not do anything, it won't try to use m_cached_id Fix that by removing the code to manually re-fetch the frame. That should be taken care of by frame_info_ptr::reinflate. Note that the old code checked if we successfully re-inflated the frame or not, and if not it did emit a warning. The equivalent in frame_info_ptr::reinflate asserts that the frame has been successfully re-inflated. It's not clear if / when this can happen, but if it can happen, we'll need to find a solution to this problem globally (everywhere a frame_info_ptr can be re-inflated), not just here. So I propose to leave it like this, until it does become a problem. Reviewed-By: Bruno Larsen Change-Id: I07b783d94e2853e0a2d058fe7deaf04eddf24835 2022-11-10 Simon Marchi gdb: move frame_info_ptr method implementations to frame-info.c I don't see any particular reason why the implementations of the frame_info_ptr object are in the header file. It only seems to add some complexity. Since we can't include frame.h in frame-info.h, we have to add declarations of functions defined in frame.c, in frame-info.h. By moving the implementations to a new frame-info.c, we can avoid that. Change-Id: I435c828f81b8a3392c43ef018af31effddf6be9c Reviewed-By: Bruno Larsen Reviewed-By: Tom Tromey 2022-11-10 Simon Marchi gdb: add prepare_reinflate/reinflate around print_frame_args in info_frame_command_core I noticed this crash: $ ./gdb --data-directory=data-directory -nx -q \ testsuite/outputs/gdb.python/pretty-print-call-by-hand/pretty-print-call-by-hand \ -x testsuite/outputs/gdb.python/pretty-print-call-by-hand/pretty-print-call-by-hand.py \ -ex "b g" -ex r (gdb) info frame Stack level 0, frame at 0x7fffffffdd80: rip = 0x555555555160 in g (/home/simark/src/binutils-gdb/gdb/testsuite/gdb.python/pretty-print-call-by-hand.c:41); saved rip = 0x5555555551a3 called by frame at 0x7fffffffdda0 source language c. Arglist at 0x7fffffffdd70, args: mt=mytype is 0x555555556004 "hello world", depth=10 Fatal signal: Segmentation fault This is another case of frame_info being invalidated under a function's feet. The stack trace when the frame_info get invalidated looks like: ... many frames to pretty print the arg, that eventually invalidate the frame_infos ... #35 0x00005568d0a8ab24 in print_frame_arg (fp_opts=..., arg=0x7ffc3216bcb0) at /home/simark/src/binutils-gdb/gdb/stack.c:489 #36 0x00005568d0a8cc75 in print_frame_args (fp_opts=..., func=0x621000233210, frame=..., num=-1, stream=0x60b000000300) at /home/simark/src/binutils-gdb/gdb/stack.c:898 #37 0x00005568d0a9536d in info_frame_command_core (fi=..., selected_frame_p=true) at /home/simark/src/binutils-gdb/gdb/stack.c:1682 print_frame_args knows that print_frame_arg can invalidate frame_info objects, and therefore calls prepare_reinflate/reinflate. However, info_frame_command_core has a separate frame_info_ptr instance (it is passed by value / copy). So info_frame_command_core needs to know that print_frame_args can invalidate frame_info objects, and therefore needs to prepare_reinflate/reinflate as well. Add those calls, and enhance the gdb.python/pretty-print-call-by-hand.exp test to test that command. Reviewed-By: Bruno Larsen Change-Id: I9edaae06d62e97ffdb30938d364437737238a960 2022-11-10 Simon Marchi gdb: clear other.m_cached_id in frame_info_ptr's move ctor We do it in the move assignment operator, so I think it makes sense to do it here too for consistency. I don't think it's absolutely necessary to clear the other object's fields (in other words, copy constructor and move constructor could be the same), as there is no exclusive resource being transfered. The important thing is to leave the moved-from object in an unknown, but valid state. But still, I think that clearing the fields of the moved-from object is not a bad idea, it helps ensure we don't rely on the moved-from object after. Change-Id: Iee900ff9d25dad51d62765d694f2e01524351340 Reviewed-By: Bruno Larsen 2022-11-10 Bruno Larsen gdb/c++: Improve error messages in overload resolution When resolving overloaded functions, GDB relies on knowing relationships between types, i.e. if a type inherits from another. However, some compilers may not add complete information for given types as a way to reduce unnecessary debug information. In these cases, GDB would just say that it couldn't resolve the method or function, with no extra information. The problem is that sometimes the user may not know that the type information is incomplete, and may just assume that there is a bug in GDB. To improve the user experience, we attempt to detect if the overload match failed because of an incomplete type, and warn the user of this. This commit also adds a testcase confirming that the message is only triggered in the correct scenario. This test was not developed as an expansion of gdb.cp/overload.cc because it needed the dwarf assembler, and porting all of overload.cc seemed unnecessary. Approved-By: Tom Tromey 2022-11-10 Bruno Larsen gdb/testsuite: allowed for function_range to deal with mangled functions When calling get_func_info inside a test case, it would cause failures if the function was printed using a C++ style mangled name. The current patch fixes this by allowing for mangled names along with the current rules. Approved-By: Tom Tromey 2022-11-10 Clément Chigot ld/testsuite: skip ld-size when -shared is not supported ld/ChangeLog: * testsuite/ld-size/size.exp: Skip when -shared is not supported. 2022-11-10 Alan Modra mach-o reloc size overflow * mach-o.c (bfd_mach_o_canonicalize_reloc): Set bfd_error on multiply overflow. 2022-11-10 Alan Modra Sanity check reloc count in get_reloc_upper_bound The idea here is the stop tools from allocating up to 32G per section for the arelent pointer array, only to find a little later that the section reloc count was fuzzed. This usually doesn't hurt much (on systems that allow malloc overcommit) except when compiled with asan. We already do this for ELF targets, and while fixing the logic recently I decided other targets ought to do the same. * elf64-sparc.c (elf64_sparc_get_reloc_upper_bound): Sanity check section reloc count against file size. * mach-o.c (bfd_mach_o_get_reloc_upper_bound): Likewise. * aoutx.h (get_reloc_upper_bound): Likewise, and don't duplicate check done in bfd_get_reloc_upper_bound. * pdp11.c (get_reloc_upper_bound): Likewise. * coffgen.c (coff_get_reloc_upper_bound): Likewise. 2022-11-10 Lancelot SIX gdb/testsuite: Fix rtld-step-nodebugsym.exp The test case introduced in bafcc335266 (Fix stepping in rtld without debug symbol) fails on some systems as reported by PR/29768. This can be seen if the system does not have debug info for the libc: (gdb) step^M Single stepping until exit from function main,^M which has no line number information.^M hello world[Inferior 1 (process 48203) exited normally]^M (gdb) PASS: gdb.base/rtld-step-nodebugsym.exp: step continue^M The program is not being run.^M (gdb) FAIL: gdb.base/rtld-step-nodebugsym.exp: continue until exit (the program is no longer running) Without glibc debug info, GDB steps until the program finishes, and then "gdb_continue_to_end" fails. As this test was designed to check that GDB does not crash in the "step" command, the continue does not carry real meaning to the test. Replace it by "print 0" so we still check that after the step command GDB is still alive, which is what we care about. Tested on Ubuntu-22.04 x86_64, with and without libc6-dbg. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29768 Approved-By: Simon Marchi 2022-11-10 Mike Frysinger sim: ppc: drop old makefile fragment Support for these files was dropped almost 30 years ago, but the ppc arch was missed. Clean that up now too. sim: ppc: drop support for dgen -L option Nothing passes this to dgen, and even if it did, nothing would happen because the generated spreg.[ch] files don't include any references back to the original data table. So drop it to simplify. sim: ppc: collapse is_readonly & length switch tables heavily Since we know we'll return 0 by default, we don't have to output case statements for readonly or length fields whose values are also zero. This is the most common case by far and thus generates a much smaller switch table in the end. 2022-11-10 Mike Frysinger sim: ppc: collapse is_valid switch table more Instead of writing: case 1: return 1; case 2: return 1; ...etc... Output a single return so we get: case 1: case 2: case ... return 1; This saves ~100 lines of code. Hopefully the compiler was already smart enough to optimize to the same code, but if not, this probably helps there too :). 2022-11-10 Mike Frysinger sim: ppc: pull default switch return out This saves a single line for the same result. By itself, it's not interesting, but we can further optimize the generated output and completely omit the switch table in some cases. Which we'll do in follow up commits. sim: ppc: constify spreg table This internal table is only ever read, so constify it. 2022-11-10 Mark Harmstone ld: Add module information substream to PDB files 2022-11-10 Luis Machado [opcodes/arm] Fix potential null pointer dereferences PR tdep/29598 As pointed out in the bug ticket, we have a couple potential null pointer dereferencing situations. Harden those. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29598 2022-11-10 Luis Machado [gdb/aarch64] Use safer memory read routines PR tdep/28796 As reported, we are using some memory read routines that don't handle read errors gracefully. Convert those to use the safe_* versions if available. This allows the code to handle those read errors in a more sensible way. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28796 2022-11-10 GDB Administrator Automatic date update in version.in 2022-11-09 Lancelot SIX Fix stepping in rtld without debug symbol Commit be6276e0aed "Allow debugging of runtime loader / dynamic linker" introduced a small regression when stepping into the runtime loader / dynamic linker from function we do not have debug information for. This is reported in PR/29747. This can be shown by the following example (given by Simon Marchi in buzilla bug report): $ cat test.c #include int main() { printf("Hi\n"); return 0; } $ gcc test.c -O0 -o test $ ./gdb -q -nx --data-directory=data-directory test -ex start -ex s Reading symbols from test... (No debugging symbols found in test) Temporary breakpoint 1 at 0x1151 Starting program: .../binutils-gdb/gdb/test [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Temporary breakpoint 1, 0x0000555555555151 in main () Single stepping until exit from function main, which has no line number information. /home/smarchi/src/binutils-gdb/gdb/infrun.c:6960:64: runtime error: member call on null pointer of type 'struct symbol' The crash happens here: #0 __sanitizer::Die () at ../../../../src/libsanitizer/sanitizer_common/sanitizer_termination.cpp:50 #1 0x00007ffff5dd7128 in __ubsan::__ubsan_handle_type_mismatch_v1_abort (Data=, Pointer=) at ../../../../src/libsanitizer/ubsan/ubsan_handlers.cpp:148 #2 0x000055556183e1a7 in process_event_stop_test (ecs=0x7fffffffccd0) at .../binutils-gdb/gdb/infrun.c:6960 #3 0x0000555561838ea4 in handle_signal_stop (ecs=0x7fffffffccd0) at .../binutils-gdb/gdb/infrun.c:6615 #4 0x000055556182f77b in handle_inferior_event (ecs=0x7fffffffccd0) at .../binutils-gdb/gdb/infrun.c:5866 When evaluating: 6956 if (execution_direction != EXEC_REVERSE 6957 && ecs->event_thread->control.step_over_calls == STEP_OVER_UNDEBUGGABLE 6958 && in_solib_dynsym_resolve_code (ecs->event_thread->stop_pc ()) 6959 && !in_solib_dynsym_resolve_code ( 6961 ecs->event_thread->control.step_start_function->value_block () 6962 ->entry_pc ())) we dereference, ecs->event_thread->control.step_start_function which is nullptr. This patch changes this condition so it evaluates to true if ecs->event_thread->control.step_start_function is nullptr since this matches the behaviour before be6276e0aed. Tested on ubuntu-22.04 x86_64. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29747 Reviewed-By: Bruno Larsen Approved-By: Kevin Buettner 2022-11-09 Mike Frysinger sim: igen: add missing newline to various error messages The error() function expects a trailing newline in its message. Most callers do this already, so adding it to the few that don't. sim: restore lstat & mkdir func checks When merging ppc configure checks into the top-level, these 2 funcs were accidentally dropped (probably due to incorrect resolution of conflicts). Restore them since the ppc code utilizes them both. sim: ppc: drop obsolete USE_WIN32API check This controls only one thing: how to call mkdir(). The gnulib code already has a mkdir module that provides this exact logic for us, so punt the code entirely. 2022-11-09 Tankut Baris Aktemur gdbserver: do not report btrace support if target does not announce it Gdbserver unconditionally reports support for btrace packets. Do not report the support, if the underlying target does not say it supports it. Otherwise GDB would query the server with btrace-related packets unnecessarily. 2022-11-09 Tom Tromey Allow 'ptype/o' for assembly PR exp/28359 points out that 'ptype/o' does not work when the current language is "asm". I tracked this down to a hard-coded list of languages in typeprint.c. This patch replaces this list with a method on 'language_defn' instead. If all languages are ever updated to have this feature, the method could be removed; but in the meantime this lets each language control what happens. I looked at having each print_type method simply modify the flags itself, but this doesn't work very well with the feature that disables method-printing by default (but allows it via a flag). Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28359 Approved-By: Andrew Burgess Approved-By: Keith Seitz 2022-11-09 Mike Frysinger sim: ppc: add missing parens with e500 macro This macro expansion was missing a set of outer-most parenthesis which some compilers would complain about depending on how the macro is used. This is just standard good macro hygiene too. sim: ppc: drop useless linking of helper tools We've never run these helper programs directly. The igen program includes the relevant source files directly and runs the code that way. So stop wasting developer CPU time linking programs that are never run. We leave the rules in place for people who need to test and debug the specific bits of code every now & then. 2022-11-09 Jan Beulich x86/Intel: don't accept malformed EXTRQ / INSERTQ Operand swapping was mistakenly suppressed when the first two operands were immediate ones, not taking into account overall operand count. This way EXTRQ / INSERTQ would have been accepted also with kind-of-AT&T operand order. For the testcase being extended, in order to not move around "GAS LISTING" expectations, suppress pagination. 2022-11-09 Alan Modra Re: Fuzzed files in archives Like commit ffbe89531c2e this avoids more silliness writing output that is going to be deleted. bfd_close and bfd_close_all_done differ in that only the former calls _bfd_write_contents. * objcopy.c (copy_archive): Don't call bfd_close for elements that are going to be deleted, call bfd_close_all_done instead. Do the same for the archive itself. 2022-11-09 Christoph Müllner RISC-V: xtheadfmemidx: Use fp register in mnemonics Although the encoding for scalar and fp registers is identical, we should follow common pratice and use fp register names when referencing fp registers. The xtheadmemidx extension consists of indirect load/store instructions which all load to or store from fp registers. Let's use fp register names in this case and adjust the test cases accordingly. gas/ * testsuite/gas/riscv/x-thead-fmemidx-fail.l: Updated since rd need to be float register. * testsuite/gas/riscv/x-thead-fmemidx-fail.s: Likewise. * testsuite/gas/riscv/x-thead-fmemidx.d: Likewise. * testsuite/gas/riscv/x-thead-fmemidx.s: Likewise. opcodes/ * riscv-opc.c (riscv_opcodes): Updated since rd need to be float register. 2022-11-09 H.J. Lu ld: Always output local symbol for relocatable link PR ld/29761 * elflink.c (elf_link_output_symstrtab): Don't skip local symbol in SEC_EXCLUDE section for relocatable link. 2022-11-09 GDB Administrator Automatic date update in version.in 2022-11-08 Simon Marchi gdb/linux-nat: get core count using /sys/devices/system/cpu/possible I get this test failure on my CI; FAIL: gdb.base/info-os.exp: get process list The particularity of this setup is that builds are done in containers who are allocated 4 CPUs on a machine that has 40. The code in nat/linux-osdata.c fails to properly fetch the core number for each task. linux_xfer_osdata_processes uses `sysconf (_SC_NPROCESSORS_ONLN)`, which returns 4, so it allocates an array of 4 integers. However, the core numbers read from /proc/pid/task/tid/stat, by function linux_common_core_of_thread, returns a value anywhere between 0 and 39. The core numbers above 3 are therefore ignored, many processes end up with no core value, and the regexp in the test doesn't match (it requires an integer as the core field). The way this the CPUs are exposed to the container is that the container sees 40 CPUs "present" and "possible", but only 4 arbitrary CPUs actually online: root@ci-node-jammy-amd64-04-08:~# cat /sys/devices/system/cpu/present 0-39 root@ci-node-jammy-amd64-04-08:~# cat /sys/devices/system/cpu/online 5,11,24,31 root@ci-node-jammy-amd64-04-08:~# cat /sys/devices/system/cpu/possible 0-39 The solution proposed in this patch is to find out the number of possible CPUs using /sys/devices/system/cpu/possible. In practice, this will probably always contain `0-N`, where N is the number of CPUs, minus one. But the documentation [1] doesn't such guarantee, so I'll assume that it can contain a more complex range list such as `2,4-31,32-63`, like the other files in that directory can have. The solution is to iterate over these numbers to find the highest possible CPU id, and use that that value plus one as the size of the array to allocate. [1] https://www.kernel.org/doc/Documentation/admin-guide/cputopology.rst Change-Id: I7abce2e43b000c1327fa94cd7b99d46e49d7ccf3 2022-11-08 Simon Marchi gdbsupport, gdb: add read_text_file_to_string, use it in linux_common_core_of_thread I would like to add more code to nat/linux-osdata.c that reads an entire file from /proc or /sys and processes it as a string afterwards. I would like to avoid duplicating the somewhat error-prone code that reads an entire file to a buffer. I think we should have a utility function that does that. Add read_file_to_string to gdbsupport/filestuff.{c,h}, and make linux_common_core_of_thread use it. I want to make the new function return an std::string, and because strtok doesn't play well with std::string (it requires a `char *`, std::string::c_str returns a `const char *`), change linux_common_core_of_thread to use std::string methods instead. Approved-By: Tom Tromey Change-Id: I1793fda72a82969c28b944a84acb953f74c9230a 2022-11-08 Peter Bergner PowerPC: Add XSP operand define opcodes/ * ppc-opc.c (XSP): New define. (powerpc_opcodes) : Use it. 2022-11-08 Tom de Vries [gdb/cli] Make quit really quit after remote connection closed Consider a hello world a.out, started using gdbserver: ... $ gdbserver --once 127.0.0.1:2345 ./a.out Process ./a.out created; pid = 15743 Listening on port 2345 ... that we can connect to using gdb: ... $ gdb -ex "target remote 127.0.0.1:2345" Remote debugging using 127.0.0.1:2345 Reading /home/vries/a.out from remote target... ... 0x00007ffff7dd4550 in _start () from target:/lib64/ld-linux-x86-64.so.2 (gdb) ... After that, we can for instance quit with confirmation: ... (gdb) quit A debugging session is active. Inferior 1 [process 16691] will be killed. Quit anyway? (y or n) y $ ... Or, kill with confirmation and quit: ... (gdb) kill Kill the program being debugged? (y or n) y [Inferior 1 (process 16829) killed] (gdb) quit $ ... Or, monitor exit, kill with confirmation, and quit: ... (gdb) monitor exit (gdb) kill Kill the program being debugged? (y or n) y Remote connection closed (gdb) quit $ ... But when doing monitor exit followed by quit with confirmation, we get the gdb prompt back, requiring us to do quit once more: ... (gdb) monitor exit (gdb) quit A debugging session is active. Inferior 1 [process 16944] will be killed. Quit anyway? (y or n) y Remote connection closed (gdb) quit $ ... So, the first quit didn't quit. This happens as follows: - quit_command calls query_if_trace_running - a TARGET_CLOSE_ERROR is thrown - it's caught in remote_target::get_trace_status, but then rethrown because it's TARGET_CLOSE_ERROR - catch_command_errors catches the error, at which point the quit command has been aborted. The TARGET_CLOSE_ERROR is defined as: ... /* Target throwing an error has been closed. Current command should be aborted as the inferior state is no longer valid. */ TARGET_CLOSE_ERROR, ... so in a way this is expected behaviour. But aborting quit because the inferior state (which we've already confirmed we're not interested in) is no longer valid, and having to type quit again seems pointless. Furthermore, the purpose of not catching errors thrown by query_if_trace_running as per commit 2f9d54cfcef ("make -gdb-exit call disconnect_tracing too, and don't lose history if the target errors on "quit""), was to make sure that error (_("Not confirmed.") had effect. Fix this in quit_command by catching only the TARGET_CLOSE_ERROR exception during query_if_trace_running and reporting it: ... (gdb) monitor exit (gdb) quit A debugging session is active. Inferior 1 [process 19219] will be killed. Quit anyway? (y or n) y Remote connection closed $ ... Tested on x86_64-linux. PR server/15746 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=15746 Approved-By: Tom Tromey 2022-11-08 Tom de Vries [gdb/testsuite] Remove test-case from test name Remove test-cases from test-names, such that we don't have the redundant: ... PASS: gdb.base/corefile.exp: backtrace in corefile.exp ... but simply: ... PASS: gdb.base/corefile.exp: backtrace ... Fixed all instances found using: ... $ grep ":.*:.*\.exp" gdb.sum ... Tested on x86_64-linux. 2022-11-08 Tom de Vries [gdb/testsuite] Fix find_core_file for core named core With test-case gdb.base/bigcore.exp I run into: ... (gdb) PASS: gdb.base/bigcore.exp: get inferior pid signal SIGABRT^M Continuing with signal SIGABRT.^M ^M Program terminated with signal SIGABRT, Aborted.^M The program no longer exists.^M (gdb) PASS: gdb.base/bigcore.exp: signal SIGABRT UNTESTED: gdb.base/bigcore.exp: can't generate a core file ... due to find_core_file returning "". There is a core file name core: ... $ ls ./outputs/gdb.base/bigcore bigcore bigcore.corefile core gdb.cmd.1 gdb.in.1 gdbserver.cmd.1 ... but it's not found. The problem is this statement: ... lappend files [list ${::testfile}.core core] ... which adds a single list item "${::testfile}.core core". Fix this in the most readable way: ... lappend files ${::testfile}.core lappend files core ... Tested on x86_64-linux. 2022-11-08 Mike Frysinger sim: mips: call Unpredictable instead of setting bogus values [PR sim/29276] The intention of this code seems to be to indicate that this insn should not be used and produces undefined behavior, so instead of setting registers to bogus values, call Unpredictable. This fixes build warnings due to 32-bit/64-bit type conversions, and outputs a log message for users at runtime instead of silent corruption. Bug: https://sourceware.org/PR29276 2022-11-08 Mike Frysinger sim: drop unused CORE_ADDR_TYPE This hasn't been used by gdb in decades, and doesn't make sense with a standalone sim program/library where the ABI is fixed. So punt it to simplify the code. 2022-11-08 Haochen Jiang x86: Correct wrong comments in vex_w_table Hi all, This wrong comment was introduced by previous AVX-VNNI-INT8 commit. Committed as obvious fix. BRs, Haochen opcodes/ChangeLog: * i386-dis.c (VEX_W_0F3851): Corrected from VEX_W_0F3851_P_0. 2022-11-08 Kong Lingling Support Intel RAO-INT gas/ChangeLog: * NEWS: Support Intel RAO-INT. * config/tc-i386.c: Add raoint. * doc/c-i386.texi: Document .raoint. * testsuite/gas/i386/i386.exp: Run RAO_INT tests. * testsuite/gas/i386/raoint-intel.d: New test. * testsuite/gas/i386/raoint.d: Ditto. * testsuite/gas/i386/raoint.s: Ditto. * testsuite/gas/i386/x86-64-raoint-intel.d: Ditto. * testsuite/gas/i386/x86-64-raoint.d: Ditto. * testsuite/gas/i386/x86-64-raoint.s: Ditto. opcodes/ChangeLog: * i386-dis.c (PREFIX_0F38FC): New. (prefix_table): Add PREFIX_0F38FC. * i386-gen.c: (cpu_flag_init): Add CPU_RAO_INT_FLAGS and CPU_ANY_RAO_INT_FLAGS. * i386-init.h: Regenerated. * i386-opc.h: (CpuRAO_INT): New. (i386_cpu_flags): Add cpuraoint. * i386-opc.tbl: Add RAO_INT instructions. * i386-tbl.h: Regenerated. 2022-11-08 GDB Administrator Automatic date update in version.in 2022-11-07 Tom Tromey Silence libtool during link The switch to linking with libtool now shows a very long link line even when V=0. This patch arranges to silence libtool in this situation. Approved-By: Simon Marchi 2022-11-07 Simon Marchi gdb: make lookup_selected_frame static Change-Id: Ide2749a34333110c7f0112b25852c78cace0d2b4 2022-11-07 Mike Frysinger sim: riscv: add missing AC_MSG_RESULT call Previous commit in here forgot to include this. sim: v850: drop subdir configure logic We've been using this only to set the default word size to 32. We can easily move this into the makefile via a -D compiler flag and clean up the build logic quite a bit. sim: mn10300: drop subdir configure logic We've been using this only to set the default word size to 32. We can easily move this into the makefile via a -D compiler flag and clean up the build logic quite a bit. sim: or1k: drop subdir configure logic We've been using this only to set the default word size to 32. We can easily move this into the makefile via a -D compiler flag and clean up the build logic quite a bit. sim: bpf: drop subdir configure logic We've been using this only to set the default word size to 64. We can easily move this into the makefile via a -D compiler flag and clean up the build logic quite a bit. sim: riscv: drop subdir configure logic We've been using this only to set the default word size to 32-vs-64 based on the $target. We can easily merge this with the top-level configure script to clean things up a bit. 2022-11-07 Jose E. Marchesi gdb: link executables with libtool This patch changes the GDB build system in order to use libtool to link the several built executables. This makes it possible to refer to libtool libraries (.la files) in CLIBS. As an application of the above, BFD now refers to ../libbfd/libbfd.la OPCODES now refers to ../opcodes/libopcodes.la LIBBACKTRACE_LIB now refers to ../libbacktrace/libbacktrace.la LIBCTF now refers to ../libctf/libctf.la NOTE1: The addition of libtool adds a few new configure-time options to GDB. Among these, --enable-shared and --disable-shared, which were previously ignored. Now GDB shall honor these options when linking, picking up the right version of the referred libtool libraries automagically. NOTE2: I have not tested the insight build. NOTE3: For regenerating configure I used an environment with Autoconf 2.69 and Automake 1.15.1. This should match the previously used version as announced in the configure script. NOTE4: Now the installed shared objects libbfd.so, libopcodes.so and libctf.so are used by gdb if binutils is installed with --enable-shared. Testing performed: - --enable-shared and --disable-shared (the default in binutils) work as expected: the linked executables link with the archive or shared libraries transparently. - Makefile.in modified for EXEEXT = .exe. It installs the binaries just fine. The installed gdb.exe runs fine. - Native build regtested in x86_64. No regressions found. - Cross build for aarch64-linux-gnu built to exercise program_transform_name and friends. The installed aarch64-linux-gnu-gdb runs fine. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29372 Approved-By: Simon Marchi 2022-11-07 Simon Marchi gdb/testsuite: use a more unique name in gdb.mi/mi-breakpoint-multiple-locations.exp I see failures in this test, due to the function name "add" being too generic, and unexpected breakpoint locations being found in my libstdc++, such as (wrapped for readability): { number="2.4",enabled="y",addr="0x00007ffff7d67e68", func="(anonymous namespace)::fast_float::bigint::add", file="/usr/src/debug/gcc/libstdc++-v3/src/c++17/fast_float/fast_float.h", fullname="/usr/src/debug/gcc/libstdc++-v3/src/c++17/fast_float/fast_float.h", line="1815", thread-groups=["i1"] } Change the test to use a more unique name. Change-Id: I91de781be62d246eb41c73eaa410ebdd12633d1d 2022-11-07 Pedro Alves Don't explicitly set clone child ptrace options linux_handle_extended_wait calls target_post_attach if we're handling a PTRACE_EVENT_CLONE, and libthread_db.so isn't active. target_post_attach just calls linux_init_ptrace_procfs to set the lwp's ptrace options. However, this is completely unnecessary, because, as man ptrace [1] says, options are inherited: "Flags are inherited by new tracees created and "auto-attached" via active PTRACE_O_TRACEFORK, PTRACE_O_TRACEVFORK, or PTRACE_O_TRACECLONE options." This removes the unnecessary call. [1] - https://man7.org/linux/man-pages/man2/ptrace.2.html Approved-By: Simon Marchi Change-Id: I533eaa60b700f7e40760311fc0d344d0b3f19a78 2022-11-07 Mike Frysinger sim: .gdbinit: generate for all arch subdirs This was being skipped for ports that had a recursive configure, but we want it for them too. sim: build: add a proper var for enabled arches The install code was using $SUBDIRS to track all enabled arches. This works, but isn't great if we want to add a subdir that isn't an arch port, or as we merge the subdirs into the top-level. Create a new var explicitly to track the list of enabled arches instead. 2022-11-07 Christophe Lyon configure: require libzstd >= 1.4.0 gas uses ZSTD_compressStream2 which is only available with libzstd >= 1.4.0, leading to build errors when an older version is installed. This patch updates the check libzstd presence to check its version is >= 1.4.0. However, since gas seems to be the only component requiring such a recent version this may imply that we disable ZSTD support for all components although some would still benefit from an older version. I ran 'autoreconf -f' in all directories containing a configure.ac file, using vanilla autoconf-2.69 and automake-1.15.1. I noticed several errors from autoheader in readline, as well as warnings in intl, but they are unrelated to this patch. This should fix some of the buildbots. OK for trunk? Thanks, Christophe 2022-11-07 Clément Chigot ld/testsuite: skip tests related to -shared when disabled Call the helper function "check_shared_lib_support" to ensure -shared is enabled before launching ld-shared, ld-elfweak and ld-elfvers. This allows to catch custom targets explicitly disabling it. ld/ChangeLog: * testsuite/ld-elfvers/vers.exp: Call check_shared_lib_support. * testsuite/ld-elfweak/elfweak.exp: Likewise. * testsuite/ld-shared/shared.exp: Likewise. 2022-11-07 Tsukasa OI RISC-V: Remove RV32EF conflict Despite that the RISC-V ISA Manual version 2.2 prohibited "RV32EF", later versions beginning with the version 20190608-Base-Ratified removed this restriction. Because the 'E' extension is still a draft, the author chose to *just* remove the conflict (not checking the ISA version). Note that, because RV32E is only used with a soft-float calling convention, there's no valid official ABI for RV32EF. It means, even if we can assemble a program with -march=rv32ef -mabi=ilp32e, floating-point registers are kept in an unmanaged state (outside ABI management). The purpose of this commit is to suppress unnecessary errors while parsing an ISA string and/or disassembling, not to allow hard-float with RVE. bfd/ChangeLog: * elfxx-riscv.c (riscv_parse_check_conflicts): Accept RV32EF because only older specifications disallowed it. gas/ChangeLog: * testsuite/gas/riscv/march-fail-rv32ef.d: Remove as not directly prohibited. * testsuite/gas/riscv/march-fail-rv32ef.l: Likewise. 2022-11-07 GDB Administrator Automatic date update in version.in 2022-11-06 Mike Frysinger sim: build: respect AM_MAKEFLAGS when entering subdirs This doesn't matter right now, but it will as we add more flags to the recursive make step to pass state down. sim: build: stop passing down SIM_PRIMARY_TARGET This was needed when the install step was run in subdirs, but now that we process that entirely in the top-level, we don't need to pass this down, so drop it. 2022-11-06 GDB Administrator Automatic date update in version.in 2022-11-05 Tom Tromey Deprecate MI version 1 MI version 1 is long since obsolete. Rather than remove it immediately (though I did send a patch for that), instead let's deprecate it in GDB 13 and then remove it for GDB 14. This version of the patch incorporates Simon's warning change, and Luis' recommendation to mention the gdb versions here. 2022-11-05 Mike Frysinger sim: fix readline linkage Now that we link programs in the top dir instead of the arch subdir, update the readline library path to be relative to the top dir. sim: use libtool to install programs Now that we use libtool to link, we have to use it to install instead of keeping the manual logic so we don't install wrapper shell scripts. sim: bfin: move linux-fixed-code.h to top-level 2022-11-05 Mike Frysinger sim: run: move linking into top-level Automake will run each subdir individually before moving on to the next one. This means that the linking phase, a single threaded process, will not run in parallel with anything else. When we have to link ~32 ports, that's 32 link steps that don't take advantage of parallel systems. On my really old 4-core system, this cuts a multi-target build from ~60 sec to ~30 sec. We eventually want to move all compile+link steps to this common dir anyways, so might as well move linking now for a nice speedup. We use noinst_PROGRAMS instead of bin_PROGRAMS because we're taking care of the install ourselves rather than letting automake process it. 2022-11-05 Mike Frysinger sim: build: add uninstall support This never worked before, but adding it to the common top-level dir is pretty easy to do now that we're unified. sim: build: move install steps to the top-level We still have to maintain custom install rules due to how we rename arch-specific files with an arch prefix in their name, but we can at least unify the logic in the common dir. sim: cris: move rvdummy linking to top-level This is only used by `make check`, so we can move it out of the default build too. sim: build: add SIM_HW_CFLAGS to top-level build too This matches what we do with targets already. sim: drop unused SIM_HARDWARE variable This hasn't been used since the refactor way back in commit f872d0d643968c1101bb8c07b252edd54f626da2 ("Only enable H/W on some mips targets."), so punt it. sim: adjust sim_hw options style We use uppercase for other variables, and are already turning it to uppercase in the arch-subdir.mk, so convert it in the configure step. sim: ppc: drop unused /dev/zero logic Nothing in the tree checks this option, or has checked for decades. The pre-cvs-import ChangeLog suggests this was added & removed back then, but can't be sure as that history doesn't exist in the VCS. sim: ppc: delete unused host bitsize settings Nothing checks this define anywhere, so drop all the logic. We don't want this to be a configure option in the first place as all such usage should be automatic & following proper types. sim: ppc: inline the sim-packages option This has only ever had a single option that's enabled by default. The objects it adds are pretty small and don't add overhead at runtime if it isn't used, so just enable it all the time to make the build code simpler. 2022-11-05 GDB Administrator Automatic date update in version.in 2022-11-04 H.J. Lu binutils: Run PR binutils/26160 test Update expected PR binutils/26160 test output for readelf out change and run PR binutils/26160 test. PR binutils/26160 * testsuite/binutils-all/pr26160.r: Updated. * testsuite/binutils-all/readelf.exp: Run PR binutils/26160 test. 2022-11-04 Lancelot SIX [testsuite] gdb.base/dlmopen: Fix test name and use gdb_attach One test name in gdb.base/dlmopen.exp changes from run to run since it includes a process id: PASS: gdb.base/dlmopen.exp: attach 3442682 This is not convenient do diff gdb.sum files to compare test runs. Fix by using gdb_attach helper function to handle attaching to the process as it produce a constant test name. While at it also check gdb_attach's return value to only run the rest of the test if the attach was successful. Approved-By: Simon Marchi 2022-11-04 Carl Love PowerPC update comments for the MMA instruction name changes. The mnemonics for the pmxvf16ger*, pmxvf32ger*,pmxvf64ger*, pmxvi4ger8*, pmxvi8ger4*, and pmxvi16ger2* instructions were officially changed to pmdmxbf16ger*, pmdmxvf32ger*, pmdmxvf64ger*, pmdmxvi4ger8*, pmdmxvi8ger4*, pmdmxvi16ger* respectively. The old mnemonics are still supported by the assembler as extended mnemonics. The disassembler generates the new mnemonics. The name changes occurred in commit: commit bb98553cad4e017f1851153fa5de91f2cee98fb2 Author: Peter Bergner Date: Sat Oct 8 16:19:51 2022 -0500 PowerPC: Add support for RFC02658 - MMA+ Outer-Product Instructions gas/ * config/tc-ppc.c (md_assemble): Only check for prefix opcodes. * testsuite/gas/ppc/rfc02658.s: New test. * testsuite/gas/ppc/rfc02658.d: Likewise. * testsuite/gas/ppc/ppc.exp: Run it. opcodes/ * ppc-opc.c (XMSK8, P_GERX4_MASK, P_GERX2_MASK, XX3GERX_MASK): New. (powerpc_opcodes): Add dmxvi8gerx4pp, dmxvi8gerx4, dmxvf16gerx2pp, dmxvf16gerx2, dmxvbf16gerx2pp, dmxvf16gerx2np, dmxvbf16gerx2, dmxvi8gerx4spp, dmxvbf16gerx2np, dmxvf16gerx2pn, dmxvbf16gerx2pn, dmxvf16gerx2nn, dmxvbf16gerx2nn, pmdmxvi8gerx4pp, pmdmxvi8gerx4, pmdmxvf16gerx2pp, pmdmxvf16gerx2, pmdmxvbf16gerx2pp, pmdmxvf16gerx2np, pmdmxvbf16gerx2, pmdmxvi8gerx4spp, pmdmxvbf16gerx2np, pmdmxvf16gerx2pn, pmdmxvbf16gerx2pn, pmdmxvf16gerx2nn, pmdmxvbf16gerx2nn. This patch updates the comments in the various gdb files to reflect the name changes. There are no functional changes made by this patch. The older instruction names are still used in the test gdb.reverse/ppc_record_test_isa_3_1.exp for backwards compatibility. Patch has been tested on Power 10 with no regressions. 2022-11-04 Carl Love PowerPC fix for the gdb.arch/powerpc-power10.exp test. The mnemonics for the pmxvf16ger*, pmxvf32ger*,pmxvf64ger*, pmxvi4ger8*, pmxvi8ger4*, pmxvi16ger2* instructions were officially changed to pmdmxvf16ger*, pmdmxvf32ger*, pmdmxvf64ger*, pmdmxvi4ger8*, pmdmxvi8ger4*, pmdmxvi16ger* respectively. The old mnemonics are still supported by the assembler as extended mnemonics. The disassembler generates the new mnemonics. The name changes occurred in commit: commit bb98553cad4e017f1851153fa5de91f2cee98fb2 Author: Peter Bergner Date: Sat Oct 8 16:19:51 2022 -0500 PowerPC: Add support for RFC02658 - MMA+ Outer-Product Instructions gas/ * config/tc-ppc.c (md_assemble): Only check for prefix opcodes. * testsuite/gas/ppc/rfc02658.s: New test. * testsuite/gas/ppc/rfc02658.d: Likewise. * testsuite/gas/ppc/ppc.exp: Run it. opcodes/ * ppc-opc.c (XMSK8, P_GERX4_MASK, P_GERX2_MASK, XX3GERX_MASK): New. (powerpc_opcodes): Add dmxvi8gerx4pp, dmxvi8gerx4, dmxvf16gerx2pp, dmxvf16gerx2, dmxvbf16gerx2pp, dmxvf16gerx2np, dmxvbf16gerx2, dmxvi8gerx4spp, dmxvbf16gerx2np, dmxvf16gerx2pn, dmxvbf16gerx2pn, dmxvf16gerx2nn, dmxvbf16gerx2nn, pmdmxvi8gerx4pp, pmdmxvi8gerx4, pmdmxvf16gerx2pp, pmdmxvf16gerx2, pmdmxvbf16gerx2pp, pmdmxvf16gerx2np, pmdmxvbf16gerx2, pmdmxvi8gerx4spp, pmdmxvbf16gerx2np, pmdmxvf16gerx2pn, pmdmxvbf16gerx2pn, pmdmxvf16gerx2nn, pmdmxvbf16gerx2nn. The above commit results in about 224 failures on Power 10 since the disassembled names do not match the expected names in the test. This patch updates the expected names in the test to match the values produced by the disassembler. This patch updates file gdb.arch/powerpc-power10.exp with the new expected values to the instructions. The comment giving the name of the instruction for each binary value in the file gdb.arch/powerpc-power10.c is updated with the new name. There are no functional changes in file gdb.arch/powerpc-power10.c. 2022-11-04 Carl Love Powerpc fix for gdb.base/unwind-on-each-insn.exp The test disassembles function foo and searches for the line "End of assembler dump" to determing the last address in the function. The assumption is the last instruction will be given right before the line "End of assembler dump". This assumption fails on PowerPC. The PowerPC disassembly of the function foo looks like: Dump of assembler code for function foo: # => 0x00000000100006dc <+0>: std r31,-8(r1) # 0x00000000100006e0 <+4>: stdu r1,-48(r1) # 0x00000000100006e4 <+8>: mr r31,r1 # 0x00000000100006e8 <+12>: nop # 0x00000000100006ec <+16>: addi r1,r31,48 # 0x00000000100006f0 <+20>: ld r31,-8(r1) # 0x00000000100006f4 <+24>: blr # 0x00000000100006f8 <+28>: .long 0x0 # 0x00000000100006fc <+32>: .long 0x0 # 0x0000000010000700 <+36>: .long 0x1000180 # End of assembler dump. The blr instruction is the last instruction in function foo. The lines with .long following the blr instruction need to be ignored. This patch adds a new condition to the gdb_test_multiple "disassemble foo" test to ignore the lines with the .long. The patch has been tested on PowerPC and Intel X86-64. 2022-11-04 Jan Beulich x86: adjust recently introduced testcases The issue addressed by 2c02c72c62d2 ("re: Support Intel AMX-FP16") has been introduced once again in a number of new tests. 2022-11-04 Nick Clifton Update release documentation with regard to uploading gprofng docs 2022-11-04 Bruno Larsen gdb/testsuite: add KFAILs to gdb.reverse/step-reverse.exp Recent changes to gdb.reverse/step-reverse.exp revealed the latent bug PR record/29745, where we can't skip one funcion forward if we're using native-gdbserver. This commit just adds kfails to the test. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29745 Approved-By: Simon Marchi 2022-11-04 Andrew Burgess opcodes/arm: silence compiler warning about uninitialized variable use After this commit: commit 6576bffe6cbbb53c5756b2fccd2593ba69b74cdf Date: Thu Jul 7 13:43:45 2022 +0100 opcodes/arm: add disassembler styling for arm Some people were seeing their builds failing with complaints about a possible uninitialized variable usage. I previously fixed an instance of this issue in this commit: commit 2df82cd4b459fbc32120e0ad1ce19e26349506fe Date: Tue Nov 1 10:36:59 2022 +0000 opcodes/arm: silence compiler warning about uninitialized variable use which did fix the build problems that the sourceware buildbot was hitting, however, an additional instance of the same problem was brought to my attention, and that is fixed in this commit. Where commit 2df82cd4b4 fixed the uninitialized variable problem in print_mve_unpredictable, this commit fixes the same problem in print_mve_undefined. As with the previous commit, I don't believe we could really ever get an uninitialized variable usage, based on the current usage of the function, so I have just initialized the reason variable to "??". 2022-11-04 Mike Frysinger sim: rx: drop unused $arch setting This is only needed for CGEN ports which RX isn't, so drop it. 2022-11-04 Mike Frysinger sim: build: remove various obsolete generation dep variables These manual settings were necessary when we weren't doing automatic header dependency tracking. That was changed a while ago, and we use automake now to do it all for us. As a result, many of these vars aren't even referenced anymore. Further, some of the source file generation (e.g. .c files, or igen, or cgen outputs) were moved to the common automake build, and it takes care of dependency tracking for us with the object files. 2022-11-04 Mike Frysinger sim: don't hardcode -ldl for SDL support Since we use AC_SEARCH_LIBS to find dlopen, we don't need to hardcode -ldl when using SDL ourselves. 2022-11-04 konglin1 Support Intel AVX-NE-CONVERT gas/ChangeLog: * NEWS: Support Intel AVX-NE-CONVERT. * config/tc-i386.c: Add avx_ne_convert. * doc/c-i386.texi: Document .avx_ne_convert. * testsuite/gas/i386/i386.exp: Run AVX NE CONVERT tests. * testsuite/gas/i386/avx-ne-convert-intel.d: New test. * testsuite/gas/i386/avx-ne-convert.d: Ditto. * testsuite/gas/i386/avx-ne-convert.s: Ditto. * testsuite/gas/i386/x86-64-avx-ne-convert-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx-ne-convert.d: Ditto. * testsuite/gas/i386/x86-64-avx-ne-convert.s: Ditto. opcodes/ChangeLog: * i386-dis.c (Mw): New. (PREFIX_VEX_0F3872): Ditto. (PREFIX_VEX_0F38B0_W_0): Ditto. (PREFIX_VEX_0F38B1_W_0): Ditto. (VEX_W_0F3872_P_1): Ditto. (VEX_W_0F38B0): Ditto. (VEX_W_0F38B1): Ditto. (prefix_table): Add PREFIX_VEX_0F3872, PREFIX_VEX_0F38B0_W_0, PREFIX_VEX_0F38B1_W_0. (vex_w_table): Add VEX_W_0F3872_P_1, VEX_W_0F38B0, VEX_W_0F38B1. * i386-gen.c (cpu_flag_init): Add CPU_AVX_NE_CONVERT_FLGAS and CPU_ANY_AVX_NE_CONVERT_FLAGS. (cpu_flags): Add CpuAVX_NE_CONVERT. * i386-init.h: Regenerated. * i386-opc.h (CpuAVX_NE CONVERT): New. (i386_cpu_flags): Add cpuavx_ne_convert. * i386-opc.tbl: Add Intel AVX-NE-CONVERT instructions. * i386-tbl.h: Regenerated. 2022-11-04 konglin1 i386: Rename template. opcodes/ * i386-opc.tbl: Rename template for VEX insn with x/y suffix to . Rename for EVEX insn with x/y suffix to . 2022-11-04 Jojo R Support multiple .eh_frame sections This patch is based on MULTIPLE_FRAME_SECTIONS and EH_FRAME_LINKONCE, it allows backend to enable this feature and use '--gc-sections' simply. * gas/dw2gencfi.h (TARGET_MULTIPLE_EH_FRAME_SECTIONS): New. (MULTIPLE_FRAME_SECTIONS): Add TARGET_MULTIPLE_EH_FRAME_SECTIONS. * gas/dw2gencfi.c (EH_FRAME_LINKONCE): Add TARGET_MULTIPLE_EH_FRAME_SECTIONS. (is_now_linkonce_segment): Likewise. (get_cfi_seg): Create relocation info between .eh_frame.* and .text.* section. * bfd/elf-bfd.h (elf_backend_can_make_multiple_eh_frame): New. * bfd/elfxx-target.h (elf_backend_can_make_multiple_eh_frame): Likewise. * bfd/elflink.c (_bfd_elf_default_action_discarded): Add checking for elf_backend_can_make_multiple_eh_frame. 2022-11-04 Jojo R gas/doc/internals.texi: fix typo * gas/doc/internals.texi (md_emit_single_noop_insn): fix '@var missing closing brace' * gas/doc/internals.texi (Hash tables): fix '@menu reference to nonexistent node `Hash tables'' 2022-11-04 Mike Frysinger sim: drop -lm from SIM_EXTRA_LIBS We have configure tests for this in the top-level configure script to link this when necessary, so we don't need to explicitly list it for specific ports. sim: build: change AC_CHECK_LIB to AC_SEARCH_LIBS With more C libraries moving functions entirely into the main -lc, change the AC_CHECK_LIB calls to AC_SEARCH_LIBS so we look in there first and avoid extra linkage when possible. sim: build: drop duplicate $(LIBS) usage COMMON_LIBS is set to $(LIBS), and CONFIG_LIBS is set to that plus @LIBS@. This leds to the values being used twice. Inline the CONFIG_LIBS variable without @LIBS@ since it's used only once. sim: build: switch to bfd & opcodes libtool linker scripts Now that we use libtool to link, we don't need to duplicate all the libs that bfd itself uses. This simplifies the configure & Makefile. sim: build: switch to libtool for linking The top-level already sets up a libtool script for the host, so use that when linking rather than invoking CC directly. This will also happen when we (someday) move the building to pure automake. 2022-11-04 GDB Administrator Automatic date update in version.in 2022-11-03 Mike Frysinger sim: testsuite: fix cris stat3 in diff setups This test uses the test itself as an input to stating regular files. This gets funky though: when we run check in parallel, the output object dir is the subdir that matches the .exp file. When we run with -j1, the output object dir is the sim builddir itself. The old test would append argv[0] to find the file, while the new test uses basename on it. Each method works in only one of the aforementioned build scenarios. Rather than complicate this any more, switch to a different file that we know will always exist: the Makefile. 2022-11-03 Mike Frysinger sim: testsuite: fix cris badarch in multi-target builds This test assumes that /bin/sh will never be a CRIS ELF by way of assuming that the current bfd cannot load it (since a basic cris cross-compiler only understands CRIS ELFs). In a multi-target build though, bfd understands just about every ELF out there, so we're able to read the /bin/sh format before failing at a diff point in the cris code. Let's switch to using / instead since it'll fail for a similar reason (at least similar enough for what this test is testing). 2022-11-03 Mike Frysinger sim: cleanup unused SIM_EXTRA_CFLAGS We want to eventually delete this, so at least drop the empty ones. sim: m32c/rx: drop useless $(ENDLIST) This is used to allow for dangling \ in object lists, but these are the only ports that do it, and it isn't really necessary. Punt it to keep the various makefiles harmonized. sim: mips: simplify fpu configure logic The configure code always defaults to HARD_FLOATING_POINT, so inline that value and drop redundant target checks as a result. 2022-11-03 Mike Frysinger sim: erc32: link sis to run program The erc32 sim does a lot itself, including handling of the CLI. It used to provide a run-compatible interface in the pre-nrun days, but it was dropped when the old run interface was punted. Since the old commit 465fb143c87076b6416a8d0d5dd79bb016060fe3 ("sim: make nrun the default run program"), the erc32 run & sis programs have been the same, and erc32 hasn't provide a real run-compatible interface. Simplify this by linking the two programs via ln/cp instead of running the linking phase twice to produce the same result. If/when we fix up the erc32 port to have a proper run interface, it should be easy to split these back apart into real programs. Note: the interf.o reference in here is a bit of a misdirect. Since that object is placed into libsim.a, it's never been linked into the programs since the linker ignores objects that aren't referenced, and only gdb uses those symbols. 2022-11-03 Nick Clifton V850 Linker: do not complain about RWX segments. PR 29748 * configure.tgt (ac_default_ld_warn_rwx_segments): Set to 0 for the V850. 2022-11-03 Mike Frysinger sim: v850: switch to standard (high-level) trace defines The v850 port uses -DDEBUG to control whether to enable internal tracing. We already have such options via the common trace framework, and those can be controlled at build time via configure flags (which the v850 code currently cannot). So switch it over to WITH_TRACE_ANY_P to simplify the v850 build code even if it doesn't (yet) respect any other trace options. sim: ppc: include copyright & license in --version This makes it match the other sim run programs and GNU tools. sim: update --version copyright year Probably should have done this 11 months ago ... sim: ppc: drop use of DATE & TIME No other tool does this, sim or otherwise, and it makes the ppc build non-reproducible. Drop it to simplify & make reproducible. 2022-11-03 Bruno Larsen gdb: Fix issue with Clang CLI macros Clang up to version 15 (current) adds macros that were defined in the command line or by "other means", according to the Dwarf specification, after the last DW_MACRO_end_file, instead of before the first DW_MACRO_start_file, as the specification dictates. When GDB reads the macros after the last file is closed, the macros never end up "in scope" and so we can't print them. This has been submitted as a bug to Clang developers (https://github.com/llvm/llvm-project/issues/54506), and PR macros/29034 was opened for GDB to keep track of this. Seeing as there is no expected date for it to be fixed, add a workaround for all current versions of Clang. The workaround detects when the main file would be closed and if the producer is Clang, and turns that operation into a noop, so we keep a reference to the current_file as those macros are read. A test case was added to confirm the functionality, and the KFAIL for running gdb.base/macro-source-path when using clang. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29034 Approved-By: Simon Marchi 2022-11-03 Nick Clifton AVR Linker: Allow the start of the data region to be specified on the linker command line. [Fix PR number in ChangeLog entry] PR 29741 * scripttempl/avr.sc (__DATA_REGION_ORIGIN__): Define. If a value has not been provided on the command line then use DATA_ORIGIN. (MEMORY): Use __DATA_REGION_ORIGIN__ as the start of the data region. AVR Linker: Allow the start of the data region to specified on the command line. PR 29471 * scripttempl/avr.sc (__DATA_REGION_ORIGIN__): Define. If a value has not been provided on the command line then use DATA_ORIGIN. (MEMORY): Use __DATA_REGION_ORIGIN__ as the start of the data region. 2022-11-03 Mike Frysinger sim: move common flags to default AM_CPPFLAGS Since all host files we compile use these settings, move them out of libcommon.a and into the default AM_CPPFLAGS. This has the effect of dropping the custom per-target automake rules. Currently it saves us ~150 lines, but since it's about ~8 lines per object, the overhead will increase quite a bit as we merge more files into a single build. This also changes the object output names, so we have to tweak the rules that were pulling in the common objects when linking. 2022-11-03 Mike Frysinger sim: merge gnulib logic into the top-level We aren't using this just yet, but we will, so make it available to building of common sim files. sim: common: remove unused include paths A bunch of these paths don't include any headers, and most likely never will, so there's no real need to keep them. This will let us harmonize paths with the top-level Makefile more easily, which will in turn make it easier to move more compile steps there. 2022-11-03 GDB Administrator Automatic date update in version.in 2022-11-02 Christophe Lyon arm: PR 29739 Fix typo where ';' should not have been replaced with '@' ';' does not always indicate the start of a comment, and commit 8cb6e17571f3fb66ccd4fa19f881602542cd06fc incorrectly replaced 3 instances of ';' with '@' in expected diagnostics, leading to tests failures. This patch restores the original ';' as needed in these testcases. Fixes bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29739 2022-11-02 Mike Frysinger sim: split CPPFLAGS between build & host In order to merge more common/ files into the top-level, we need to add more host flags to CPPFLAGS, and that conflicts with our current use with build-time tools. So split them apart like we do with all other build flags to avoid the issue. sim: h8300: switch to cpu for state Rather than rely on pulling out the first cpu from the sim state for cpu state, pass down the active cpu that's already available. sim: common: change sim_{fetch,store}_register helpers to use void* buffers When reading/writing arbitrary data to the system's memory, the unsigned char pointer type doesn't make that much sense. Switch it to void so we align a bit with standard C library read/write functions, and to avoid having to sprinkle casts everywhere. 2022-11-02 Jon Turney Fix Cygwin build after 20489cca Update code under __CYGWIN__ which accesses inferior process information which is now stored in windows_process_info rather than globals. 2022-11-02 Jon Turney Fix Cygwin build after bcb9251f Absent _UNICODE being defined (which gdb's Makefile doesn't do), windows.h will always define STARTUPINFO is as STARTUPINFOA, so this cast isn't correct when create_process expects a STARTUPINFOW parameter (i.e. in a Cygwin build). Instead write this as &info_ex.StartupInfo (which is always of the correct type). 2022-11-02 Jan Beulich x86: drop bogus Tbyte Prior to commit 1cb0ab18ad24 ("x86/Intel: restrict suffix derivation") the Tbyte modifier on the FLDT and FSTPT templates was pointless, as No_ldSuf would have prevented it being accepted. Due to the special nature of LONG_DOUBLE_MNEM_SUFFIX said commit, however, has led to these insns being accepted in Intel syntax mode even when "tbyte ptr" was present. Restore original behavior by dropping Tbyte there. (Note that these insns in principle should by marked AT&T syntax only, but since they haven't been so far we probably shouldn't change that.) x86: simplify expressions in update_imm() Comparing the sum of the relevant .imm fields against a constant imo makes more obvious what is actually meant. It allows dropping of two static variables, with a 3rd drop requiring two more minor adjustments elsewhere, utilizing that "i" is zeroed first thing in md_assemble(). This also increases the chances of the compiler doing the calculations all in registers. 2022-11-02 Nelson Chu RISC-V: Fixed the missing $x+arch when adding odd paddings for alignment. Consider the case, .option arch, rv32i .option norelax .option arch, +c .byte 1 .align 2 addi a0, zero, 1 Assembler adds $d for the odd .byte, and then adds $x+arch for the alignment. Since norelax, riscv_add_odd_padding_symbol will add the $d and $x for the odd alignment, but accidently remove the $x+arch because it has the same address as $d. Therefore, we will get the unexpected result before applying this patch, .byte 1 # $d .align 2 # odd alignment, $xrv32ic replaced by $d + $x After this patch, the expected result should be, .byte 1 # $d .align 2 # odd alignment, $xrv32ic replaced by $d + $xrv32ic gas/ * config/tc-riscv.c (make_mapping_symbol): If we are adding mapping symbol for odd alignment, then we probably will remove the $x+arch by accidently when it has the same address of $d. Try to add the removed $x+arch back after the $d rather than just $x. (riscv_mapping_state): Updated since parameters of make_mapping_symbol are changed. (riscv_add_odd_padding_symbol): Likewise. (riscv_remove_mapping_symbol): Removed and moved the code into the riscv_check_mapping_symbols. (riscv_check_mapping_symbols): Updated. * testsuite/gas/riscv/mapping-dis.d: Updated and added new testcase. * testsuite/gas/riscv/mapping-symbols.d: Likewise. * testsuite/gas/riscv/mapping.s: Likewise. 2022-11-02 Hu, Lin1 Support Intel MSRLIST gas/ChangeLog: * NEWS: Support Intel MSRLIST. * config/tc-i386.c: Add msrlist. * doc/c-i386.texi: Document .msrlist. * testsuite/gas/i386/i386.exp: Add MSRLIST tests. * testsuite/gas/i386/msrlist-inval.l: New test. * testsuite/gas/i386/msrlist-inval.s: Ditto. * testsuite/gas/i386/x86-64-msrlist-intel.d: Ditto. * testsuite/gas/i386/x86-64-msrlist.d: Ditto. * testsuite/gas/i386/x86-64-msrlist.s: Ditto. opcodes/ChangeLog: * i386-dis.c (X86_64_0F01_REG_0_MOD_3_RM_6_P_1): New. (X86_64_0F01_REG_0_MOD_3_RM_6_P_3): Ditto. (prefix_table): New entry for msrlist. (x86_64_table): Add X86_64_0F01_REG_0_MOD_3_RM_6_P_1 and X86_64_0F01_REG_0_MOD_3_RM_6_P_3. * i386-gen.c (cpu_flag_init): Add CPU_MSRLIST_FLAGS and CPU_ANY_MSRLIST_FLAGS. * i386-init.h: Regenerated. * i386-opc.h (CpuMSRLIST): New. (i386_cpu_flags): Add cpumsrlist. * i386-opc.tbl: Add MSRLIST instructions. * i386-tbl.h: Regenerated. 2022-11-02 Hu, Lin1 Support Intel WRMSRNS gas/ChangeLog: * NEWS: Support Intel WRMSRNS. * config/tc-i386.c: Add wrmsrns. * doc/c-i386.texi: Document .wrmsrns. * testsuite/gas/i386/i386.exp: Add WRMSRNS tests. * testsuite/gas/i386/wrmsrns-intel.d: New test. * testsuite/gas/i386/wrmsrns.d: Ditto. * testsuite/gas/i386/wrmsrns.s: Ditto. * testsuite/gas/i386/x86-64-wrmsrns-intel.d: Ditto. * testsuite/gas/i386/x86-64-wrmsrns.d: Ditto. opcodes/ChangeLog: * i386-dis.c (PREFIX_0F01_REG_0_MOD_3_RM_6): New. (prefix_table): Add PREFIX_0F01_REG_0_MOD_3_RM_6. (rm_table): New entry for wrmsrns. * i386-gen.c (cpu_flag_init): Add CPU_WRMSRNS_FLAGS and CPU_ANY_WRMSRNS_FLAGS. (cpu_flags): Add CpuWRMSRNS. * i386-init.h: Regenerated. * i386-opc.h (CpuWRMSRNS): New. (i386_cpu_flags): Add cpuwrmsrns. * i386-opc.tbl: Add WRMSRNS instructions. * i386-tbl.h: Regenerated. 2022-11-02 Kong Lingling Add handler for more i386_cpu_flags gas/ChangeLog: * config/tc-i386.c (cpu_flags_all_zero): Add new ARRAY_SIZE handle. (cpu_flags_equal): Ditto. (cpu_flags_and): Ditto. (cpu_flags_or): Ditto. (cpu_flags_and_not): Ditto. 2022-11-02 Haochen Jiang Support Intel CMPccXADD gas/ChangeLog: * NEWS: Support Intel CMPccXADD. * config/tc-i386.c: Add cmpccxadd. (build_modrm_byte): Add operations for Vex.VVVV reg on operand 0 while have memory operand. * doc/c-i386.texi: Document .cmpccxadd. * testsuite/gas/i386/i386.exp: Run CMPccXADD tests. * testsuite/gas/i386/cmpccxadd-inval.s: New test. * testsuite/gas/i386/cmpccxadd-inval.l: Ditto. * testsuite/gas/i386/x86-64-cmpccxadd-intel.d: Ditto. * testsuite/gas/i386/x86-64-cmpccxadd.s: Ditto. * testsuite/gas/i386/x86-64-cmpccxadd.d: Ditto. opcodes/ChangeLog: * i386-dis.c (Mdq): New. (X86_64_VEX_0F38E0): Ditto. (X86_64_VEX_0F38E1): Ditto. (X86_64_VEX_0F38E2): Ditto. (X86_64_VEX_0F38E3): Ditto. (X86_64_VEX_0F38E4): Ditto. (X86_64_VEX_0F38E5): Ditto. (X86_64_VEX_0F38E6): Ditto. (X86_64_VEX_0F38E7): Ditto. (X86_64_VEX_0F38E8): Ditto. (X86_64_VEX_0F38E9): Ditto. (X86_64_VEX_0F38EA): Ditto. (X86_64_VEX_0F38EB): Ditto. (X86_64_VEX_0F38EC): Ditto. (X86_64_VEX_0F38ED): Ditto. (X86_64_VEX_0F38EE): Ditto. (X86_64_VEX_0F38EF): Ditto. (x86_64_table): Add X86_64_VEX_0F38E0, X86_64_VEX_0F38E1, X86_64_VEX_0F38E2, X86_64_VEX_0F38E3, X86_64_VEX_0F38E4, X86_64_VEX_0F38E5, X86_64_VEX_0F38E6, X86_64_VEX_0F38E7, X86_64_VEX_0F38E8, X86_64_VEX_0F38E9, X86_64_VEX_0F38EA, X86_64_VEX_0F38EB, X86_64_VEX_0F38EC, X86_64_VEX_0F38ED, X86_64_VEX_0F38EE, X86_64_VEX_0F38EF. * i386-gen.c (cpu_flag_init): Add CPU_CMPCCXADD_FLAGS and CPU_ANY_CMPCCXADD_FLAGS. (cpu_flags): Add CpuCMPCCXADD. * i386-init.h: Regenerated. * i386-opc.h (CpuCMPCCXADD): New. (i386_cpu_flags): Add cpucmpccxadd. Comment unused for it is actually 0. * i386-opc.tbl: Add Intel CMPccXADD instructions. * i386-tbl.h: Regenerated. 2022-11-02 Cui,Lili Support Intel AVX-VNNI-INT8 gas/ * NEWS: Support Intel AVX-VNNI-INT8. * config/tc-i386.c: Add avx_vnni_int8. * doc/c-i386.texi: Document avx_vnni_int8. * testsuite/gas/i386/avx-vnni-int8-intel.d: New file. * testsuite/gas/i386/avx-vnni-int8.d: Likewise. * testsuite/gas/i386/avx-vnni-int8.s: Likewise. * testsuite/gas/i386/x86-64-avx-vnni-int8-intel.d: Likewise. * testsuite/gas/i386/x86-64-avx-vnni-int8.d: Likewise. * testsuite/gas/i386/x86-64-avx-vnni-int8.s: Likewise. * testsuite/gas/i386/i386.exp: Run AVX VNNI INT8 tests. opcodes/ * i386-dis.c: (PREFIX_VEX_0F3850) New. (PREFIX_VEX_0F3851): Likewise. (VEX_W_0F3850_P_0): Likewise. (VEX_W_0F3850_P_1): Likewise. (VEX_W_0F3850_P_2): Likewise. (VEX_W_0F3850_P_3): Likewise. (VEX_W_0F3851_P_0): Likewise. (VEX_W_0F3851_P_1): Likewise. (VEX_W_0F3851_P_2): Likewise. (VEX_W_0F3851_P_3): Likewise. (VEX_W_0F3850): Delete. (VEX_W_0F3851): Likewise. (prefix_table): Add PREFIX_VEX_0F3850 and PREFIX_VEX_0F3851. (vex_table): Add PREFIX_VEX_0F3850 and PREFIX_VEX_0F3851, delete VEX_W_0F3850 and VEX_W_0F3851. (vex_w_table): Add VEX_W_0F3850_P_0, VEX_W_0F3850_P_1, VEX_W_0F3850_P_2 VEX_W_0F3850_P_3, VEX_W_0F3851_P_0, VEX_W_0F3851_P_1, VEX_W_0F3851_P_2 and VEX_W_0F3851_P_3, delete VEX_W_0F3850 and VEX_W_0F3851. * i386-gen.c: (cpu_flag_init): Add CPU_AVX_VNNI_INT8_FLAGS and CPU_ANY_AVX_VNNI_INT8_FLAGS. (cpu_flags): Add CpuAVX_VNNI_INT8. * i386-opc.h (CpuAVX_VNNI_INT8): New. * i386-opc.tbl: Add Intel AVX_VNNI_INT8 instructions. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. 2022-11-02 Hongyu Wang Haochen Jiang Support Intel AVX-IFMA x86: Support Intel AVX-IFMA Intel AVX IFMA instructions are marked with CpuVEX_PREFIX, which is cleared by default. Without {vex} pseudo prefix, Intel IFMA instructions are encoded with EVEX prefix. {vex} pseudo prefix will turn on VEX encoding for Intel IFMA instructions. gas/ * NEWS: Support Intel AVX-IFMA. * config/tc-i386.c (cpu_arch): Add avx_ifma. * doc/c-i386.texi: Document .avx_ifma. * testsuite/gas/i386/avx-ifma.d: New file. * testsuite/gas/i386/avx-ifma-intel.d: Likewise. * testsuite/gas/i386/avx-ifma.s: Likewise. * testsuite/gas/i386/x86-64-avx-ifma.d: Likewise. * testsuite/gas/i386/x86-64-avx-ifma-intel.d: Likewise. * testsuite/gas/i386/x86-64-avx-ifma.s: Likewise. * testsuite/gas/i386/i386.exp: Run AVX IFMA tests. opcodes/ * i386-dis.c (PREFIX_VEX_0F38B4): New. (PREFIX_VEX_0F38B5): Likewise. (VEX_W_0F38B4_P_2): Likewise. (VEX_W_0F38B5_P_2): Likewise. (prefix_table): Add PREFIX_VEX_0F38B4 and PREFIX_VEX_0F38B5. (vex_table): Add VEX_W_0F38B4_P_2 and VEX_W_0F38B5_P_2. * i386-dis-evex.h: Fold AVX512IFMA entries to AVX-IFMA. * i386-gen.c (cpu_flag_init): Clear the CpuAVX_IFMA bit in CPU_UNKNOWN_FLAGS. Add CPU_AVX_IFMA_FLGAS and CPU_ANY_AVX_IFMA_FLAGS. Add CpuAVX_IFMA to CPU_AVX2_FLAGS. (cpu_flags): Add CpuAVX_IFMA. * i386-opc.h (CpuAVX_IFMA): New. (i386_cpu_flags): Add cpuavx_ifma. * i386-opc.tbl: Add Intel AVX IFMA instructions. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. 2022-11-02 GDB Administrator Automatic date update in version.in 2022-11-01 Andrew Burgess opcodes/arm: don't pass non-string literal to printf like function The earlier commit: commit 6576bffe6cbbb53c5756b2fccd2593ba69b74cdf Date: Thu Jul 7 13:43:45 2022 +0100 opcodes/arm: add disassembler styling for arm introduced two places where a register name was passed as the format string to the disassembler's fprintf_styled_func callback. This will cause a warning from some compilers, like this: ../../binutils-gdb/opcodes/arm-dis.c: In function ‘print_mve_vld_str_addr’: ../../binutils-gdb/opcodes/arm-dis.c:6005:3: error: format not a string literal and no format arguments [-Werror=format-security] 6005 | func (stream, dis_style_register, arm_regnames[gpr]); | ^~~~ This commit fixes these by using "%s" as the format string. 2022-11-01 Andrew Burgess opcodes/arm: silence compiler warning about uninitialized variable use The earlier commit: commit 6576bffe6cbbb53c5756b2fccd2593ba69b74cdf Date: Thu Jul 7 13:43:45 2022 +0100 opcodes/arm: add disassembler styling for arm was causing a compiler warning about a possible uninitialized variable usage within opcodes/arm-dis.c. The problem is in print_mve_unpredictable, and relates to the reason variable, which is set by a switch table. Currently the switch table does cover every valid value, though there is no default case. The variable switched on is passed in as an argument to the print_mve_unpredictable function. Looking at how print_mve_unpredictable is used, there is only one use, the second argument is the one that is used for the switch table, looking at how this argument is set, I don't believe it is possible for this argument to take an invalid value. So, I think the compiler warning is a false positive. As such, my proposed solution is to initialize the reason variable to the string "??", this will silence the warning, and the "??" string should never end up being printed. 2022-11-01 Andrew Burgess opcodes/arm: add disassembler styling for arm This commit adds disassembler styling for the ARM architecture. The ARM disassembler is driven by several instruction tables, e.g. cde_opcodes, coprocessor_opcodes, neon_opcodes, etc The type for elements in each table can vary, but they all have one thing in common, a 'const char *assembler' field. This field contains a string that describes the assembler syntax of the instruction. Embedded within that assembler syntax are various escape characters, prefixed with a '%'. Here's an example of a very simple instruction from the arm_opcodes table: "pld\t%a" The '%a' indicates a particular type of operand, the function print_insn_arm processes the arm_opcodes table, and includes a switch statement that handles the '%a' operand, and takes care of printing the correct value for that instruction operand. It is worth noting that there are many print_* functions, each function handles a single *_opcodes table, and includes its own switch statement for operand handling. As a result, every *_opcodes table uses a different mapping for the operand escape sequences. This means that '%a' might print an address for one *_opcodes table, but in a different *_opcodes table '%a' might print a register operand. Notice as well that in our example above, the instruction mnemonic 'pld' is embedded within the assembler string. Some instructions also include comments within the assembler string, for example, also from the arm_opcodes table: "nop\t\t\t@ (mov r0, r0)" here, everything after the '@' is a comment that is displayed at the end of the instruction disassembly. The next complexity is that the meaning of some escape sequences is not necessarily fixed. Consider these two examples from arm_opcodes: "ldrex%c\tr%12-15d, [%16-19R]" "setpan\t#%9-9d" Here, the '%d' escape is used with a bitfield modifier, '%12-15d' in the first instruction, and '%9-9d' in the second instruction, but, both of these are the '%d' escape. However, in the first instruction, the '%d' is used to print a register number, notice the 'r' immediately before the '%d'. In the second instruction the '%d' is used to print an immediate, notice the '#' just before the '%d'. We have two problems here, first, the '%d' needs to know if it should use register style or immediate style, and secondly, the 'r' and '#' characters also need to be styled appropriately. The final thing we must consider is that some escape codes result in more than just a single operand being printed, for example, the '%q' operand as used in arm_opcodes ends up calling arm_decode_shift, which can print a register name, a shift type, and a shift amount, this could end up using register, sub-mnemonic, and immediate styles, as well as the text style for things like ',' between the different parts. I propose a three layer approach to adding styling: (1) Basic state machine: When we start printing an instruction we should maintain the idea of a 'base_style'. Every character from the assembler string will be printed using the base_style. The base_style will start as mnemonic, as each instruction starts with an instruction mnemonic. When we encounter the first '\t' character, the base_style will change to text. When we encounter the first '@' the base_style will change to comment_start. This simple state machine ensures that for simple instructions the basic parts, except for the operands themselves, will be printed in the correct style. (2) Simple operand styling: For operands that only have a single meaning, or which expand to multiple parts, all of which have a consistent meaning, then I will simply update the operand printing code to print the operand with the correct style. This will cover a large number of the operands, and is the most consistent with how styling has been added to previous architectures. (3) New styling syntax in assembler strings: For cases like the '%d' that I describe above, I propose adding a new extension to the assembler syntax. This extension will allow me to temporarily change the base_style. Operands like '%d', will then print using the base_style rather than using a fixed style. Here are the two examples from above that use '%d', updated with the new syntax extension: "ldrex%c\t%{R:r%12-15d%}, [%16-19R]" "setpan\t%{I:#%9-9d%}" The syntax has the general form '%{X:....%}' where the 'X' character changes to indicate a different style. In the first instruction I use '%{R:...%}' to change base_style to the register style, and in the second '%{I:...%}' changes base_style to immediate style. Notice that the 'r' and '#' characters are included within the new style group, this ensures that these characters are printed with the correct style rather than as text. The function decode_base_style maps from character to style. I've included a character for each style for completeness, though only a small number of styles are currently used. I have updated arm-dis.c to the above scheme, and checked all of the tests in gas/testsuite/gas/arm/, and the styling looks reasonable. There are no regressions on the ARM gas/binutils/ld tests that I can see, so I don't believe I've changed the output layout at all. There were two binutils tests for which I needed to force the disassembler styling off. I can't guarantee that I've not missed some untested corners of the disassembler, or that I might have just missed some incorrectly styled output when reviewing the test results, but I don't believe I've introduced any changes that could break the disassembler - the worst should be some aspect is not styled correctly. 2022-11-01 Andrew Burgess opcodes/arm: use '@' consistently for the comment character Looking at the ARM disassembler output, every comment seems to start with a ';' character, so I assumed this was the correct character to start an assembler comment. I then spotted a couple of places where there was no ';', but instead, just a '@' character. I thought that this was a case of a missing ';', and proposed a patch to add the missing ';' characters. Turns out I was wrong, '@' is actually the ARM assembler comment character, while ';' is the statement separator. Thus this: nop ;@ comment is two statements, the first is the 'nop' instruction, while the second contains no instructions, just the '@ comment' comment text. This: nop @ comment is a single 'nop' instruction followed by a comment. And finally, this: nop ; comment is two statements, the first contains the 'nop' instruction, while the second contains the instruction 'comment', which obviously isn't actually an instruction at all. Why this matters is that, in the next commit, I would like to add libopcodes syntax styling support for ARM. The question then is how should the disassembler style the three cases above? As '@' is the actual comment start character then clearly the '@' and anything after it can be styled as a comment. But what about ';' in the second example? Style as text? Style as a comment? And the third example is even harder, what about the 'comment' text? Style as an instruction mnemonic? Style as text? Style as a comment? I think the only sensible answer is to move the disassembler to use '@' consistently as its comment character, and remove all the uses of ';'. Then, in the next commit, it's obvious what to do. There's obviously a *lot* of tests that get updated by this commit, the only actual code changes are in opcodes/arm-dis.c. 2022-11-01 GDB Administrator Automatic date update in version.in 2022-10-31 Tom Tromey Add missing TYPE_CODE_* constants to Python A user noticed that TYPE_CODE_FIXED_POINT was not exported by the gdb Python layer. This patch fixes the bug, and prevents future occurences of this type of bug. 2022-10-31 Carl Love Remove REPARSE condition to force hardware resource checking when updating watchpoints Currently the resource checking is done if REPARSE is true. The hardware watchpoint resource checking in update_watchpoint needs to be redone on each call to function update_watchpoints as the value chain may have changed. The number of hardware registers needed for a watchpoint can change if the variable being watched changes. This situation occurs in this test when watching variable **global_ptr_ptr. Initially when the watch command is issued, only two addresses need to be watched as **global_ptr_ptr has not yet been initialized. Once the value of **global_ptr_ptr is initialized the locations to be tracked increase to three addresses. However, update_watchpoints is not called again with REPARSE set to 1 to force the resource checking to be redone. When the test is run on Power 10, an internal gdb error occurs when the PowerPC routine tries to setup the three hardware watchpoint address since the hw only has two hardware watchpoint registers. The error occurs because the resource checking was not redone in update_watchpoints after **global_ptr_ptr changed. The following descibes the situation in detail that occurs on Power 10 with gdb running on the binary for gdb.base/watchpoint.c. 1 break func4 2 run 3 watch *global_ptr 4 next execute source code: buf[0] = 3; 5 next execute source code: global_ptr = buf; 6 next execute source code: buf[0] = 7; 7 delete 2 (delete watch *global_ptr) 8 watch **global_ptr_ptr 9 next execute source code: buf[1] = 5; 10 next global_ptr_ptr = &global_ptr; 11 next buf[0] = 9; In step 8, the the watch **global_ptr_prt command calls update_watchpoint in breakpoint.c with REPARSE set to 1. The function update_watchpoint calls can_use_hardware_watchpoint to see if there are enough resources available to add the watchpoint since REPARSE is set to 1. At this point, **global_ptr_ptr has not been initialized so only two addresses are watched. The val_chain contains the address for **global_ptr_ptr and 0 since **global_ptr_ptr has not been initialized. The update_watchpoint updates the breakpoint list as follows: breakpoint 0 loc 0: b->address = 0x100009c0 breakpoint 1 loc 1: b->address = 0x7ffff7f838a0 breakpoint 2 loc 2: b->address = 0x7ffff7b7fc54 breakpoint 3 loc 3: b->address = 0x7ffff7a5788c breakpoint 4 loc 4: b->address = 0x0 <-- location pointed to by global_ptr_ptr loc 5: b->address = 0x100200b8 <-- global_ptr_ptr watchpoint breakpoint 5 loc 6: b->address = 0x7ffff7b7fc54 In step 10, the next command executes the source code global_ptr_ptr = &global_ptr. This changes the set of locations to be watched for the watchpoint **global_ptr_prt. The list of addresses for the breakpoint consist of the address for global_ptr_prt, global_ptr and buf. The breakpoint list gets updated by update_watchpoint as follows: breakpoint 0 loc 0: b->address = 0x100009c0 breakpoint 1 loc 1: b->address = 0x7ffff7f838a0 breakpoint 2 loc 2: b->address = 0x7ffff7b7fc54 breakpoint 3 loc 3: b->address = 0x7ffff7a5788c breakpoint 4 loc 4: b->address = 0x10020050 buf loc 5: b->address = 0x100200b0 watch *global_ptr loc 6: b->address = 0x100200b8 watch **global_ptr_ptr breakpoint 5 loc 7: b->address = 0x7ffff7b7fc54 breakpoint 6 However, the hardware resource checking was not redone because update_breakpoint was called with REPARSE equal to 0. Step 11, execute the third next command. The function ppc_linux_nat_target::low_prepare_to_resume() attempts a ptrace call to setup each of the three address for breakpoint 4. The slot value returned for the third ptrace call is -1 indicating an error because there are only two hardware watchpoint registers available on Power 10. This patch removes just the statement "if (reparse)" in function update_watchpoint to force the resources to be rechecked on every call to the function. This ensures that any changes to the val_chain resulting in needing more resources then available will be caught. The patch has been tested on Power 8, Power 10 and X86-64. Note the patch has no effect on Power 9 since hardware watchpoint support is disabled on that processor. 2022-10-31 Carl Love PowerPC, add support for recording pipe2 system call. Test gdb.reverse/pipe-reverse.exp fails on Power 10 running the fedora 36 distro. The gdb record error message is: Process record and replay target doesn't support syscall number 317. System call 317 on PowerPC maps to the pipe2 system call. This patch adds support for the missing pipe2 system call for PowerPC. Patch fixes the test failure in gdb.reverse/pipe-reverse.exp. The patch has been tested on Power 10 with no regression failures. 2022-10-31 Jan Beulich x86: minor improvements to optimize_imm() (part III) Earlier tidying still missed an opportunity: There's no need for the "anyimm" static variable. Instead of using it in the loop to mask "allowed" (which is necessary to satisfy operand_type_or()'s assertions) simply use "mask", requiring it to be calculated first. That way the post-loop masking by "mask" ahead of the operand_type_all_zero() can be dropped. 2022-10-31 Mike Frysinger sim: reg: constify store helper These functions only read from memory, so mark the pointer as const. sim: constify various integer readers These functions only read from memory, so mark the pointer as const. sim: cgen: constify GETT helpers These functions only read from memory, so mark the pointer as const. sim: common: change sim_read & sim_write to use void* buffers When reading/writing arbitrary data to the system's memory, the unsigned char pointer type doesn't make that much sense. Switch it to void so we align a bit with standard C library read/write functions, and to avoid having to sprinkle casts everywhere. 2022-10-31 H.J. Lu x86: Silence GCC 12 warning on tc-i386.c Silence GCC 12 warning on tc-i386.c: gas/config/tc-i386.c: In function ‘md_assemble’: gas/config/tc-i386.c:5039:16: error: too many arguments for format [-Werror=format-extra-args] 5039 | as_warn (_("only support RIP-relative address"), i.tm.name); * config/tc-i386.c (md_assemble): Print mnemonic in RIP-relative warning. * estsuite/gas/i386/x86-64-prefetchi-warn.l: Updated. 2022-10-31 Tom Tromey Use enum for gdbarch's call_dummy_location This changes gdbarch to use an enum for call_dummy_location, providing a little more type safety. Inline initialization of gdbarch members This changes gdbarch to use the "predefault" to initialize its members inline. This required changing a couple of the Value instantiations to avoid a use of "gdbarch" during initialization, but on the whole I think this is better -- it removes a hidden ordering dependency. 2022-10-31 Tom Tromey Fix regression in pointer-to-member printing PR c++/29243 points out that "info func" on a certain C++ executable will cause an infinite loop in gdb. I tracked this down to a bug introduced by commit 6b5a7bc76 ("Handle member pointers directly in generic_value_print"). Before this commit, the C++ code to print a member pointer would wind up calling value_print_scalar_formatted; but afterward it simply calls generic_value_print and gets into a loop. This patch restores the previous behavior and adds a regression test. 2022-10-31 Nick Clifton Updated Romainain translation for the binutils sub-directory and Swedish translations for the ld and opcodes sub-directories. 2022-10-31 Cui, Lili Support Intel PREFETCHI gas/ChangeLog: * NEWS: Add support for Intel PREFETCHI instruction. * config/tc-i386.c (load_insn_p): Use prefetch* to fold all prefetches. (md_assemble): Add warning for illegal input of PREFETCHI. * doc/c-i386.texi: Document .prefetchi. * testsuite/gas/i386/i386.exp: Run PREFETCHI tests. * testsuite/gas/i386/x86-64-lfence-load.d: Add PREFETCHI. * testsuite/gas/i386/x86-64-lfence-load.s: Likewise. * testsuite/gas/i386/x86-64-prefetch.d: New test. * testsuite/gas/i386/x86-64-prefetchi-intel.d: Likewise. * testsuite/gas/i386/x86-64-prefetchi-inval-register.d: Likewise.. * testsuite/gas/i386/x86-64-prefetchi-inval-register.s: Likewise. * testsuite/gas/i386/x86-64-prefetchi-warn.l: Likewise. * testsuite/gas/i386/x86-64-prefetchi-warn.s: Likewise. * testsuite/gas/i386/x86-64-prefetchi.d: Likewise. * testsuite/gas/i386/x86-64-prefetchi.s: Likewise. opcodes/ChangeLog: * i386-dis.c (reg_table): Add MOD_0F18_REG_6 and MOD_0F18_REG_7 (x86_64_table): Add X86_64_0F18_REG_6_MOD_0 and X86_64_0F18_REG_7_MOD_0. (mod_table): Add MOD_0F18_REG_6 and MOD_0F18_REG_7. (prefix_table): Add PREFIX_0F18_REG_6_MOD_0_X86_64 and PREFIX_0F18_REG_7_MOD_0_X86_64. (PREFETCHI_Fixup): New. * i386-gen.c (cpu_flag_init): Add CPU_PREFETCHI_FLAGS. (cpu_flags): Add CpuPREFETCHI. * i386-opc.h (CpuPREFETCHI): New. (i386_cpu_flags): Add cpuprefetchi. * i386-opc.tbl: Add Intel PREFETCHI instructions. * i386-init.h: Regenerated. * i386-tbl.h: Likewise. 2022-10-31 Bruno Larsen gdb/testsuite: fix gdb.cp/converts.exp to run with clang Clang attempts to minimize the size of the debug-info by not adding complete information about types that aren't constructed in a given file. Specifically, this meant that there was minimal information about class B in the test gdb.cp/converts.exp. To fix this, we just need to construct any object of type B in that file. Approved-By: Andrew Burgess 2022-10-31 Bruno Larsen gdb/testsuite: add XFAIL to gdb.cp/ptype-flags.exp when using clang When running gdb.cp/ptype-flags.exp using Clang, we get an unexpected failure when printing the type of a class with an internal typedef. This happens because Clang doesn't add accessibility information for typedefs inside classes (see https://github.com/llvm/llvm-project/issues/57608 for more info). To help with Clang testing, an XFAIL was added to this test. 2022-10-31 Yoshinori Sato RX assembler: switch arguments of thw MVTACGU insn. 2022-10-31 Nick Clifton objdump: Add configure time option to enable colored disassembly output by default. PR 29457 * configure.ac: Add --enable-colored-disassembly. * objdump.c: Add --disassembler-color=terminal. * doc/binutils.texi (objdump): Document the new option. * NEWS: Mention new feature. * config.in: Regenerate in. * configure: Regenerate. 2022-10-31 Mark Harmstone ld: Add publics stream to PDB files ld: Add section header stream to PDB files ld: Use %E in einfo in pdb.c Resubmission, taking into account https://sourceware.org/pipermail/binutils/2022-October/123948.html. 2022-10-31 GDB Administrator Automatic date update in version.in 2022-10-30 Alan Modra Pool section entries for DWP version 1 Ref: https://gcc.gnu.org/wiki/DebugFissionDWP?action=recall&rev=3 Fuzzers have found a weakness in the code stashing pool section entries. With random nonsensical values in the index entries (rather than each index pointing to its own set distinct from other sets), it's possible to overflow the space allocated, losing the NULL terminator. Without a terminator, find_section_in_set can run off the end of the shndx_pool buffer. Fix this by scanning the pool directly. binutils/ * dwarf.c (add_shndx_to_cu_tu_entry): Delete range check. (end_cu_tu_entry): Likewise. (process_cu_tu_index): Fill shndx_pool by directly scanning pool, rather than indirectly from index entries. 2022-10-30 GDB Administrator Automatic date update in version.in 2022-10-29 Maciej W. Rozycki gdb/testsuite: Wrap `param_integer_error' in gdb.guile/scm-parameter.exp Wrap an overlong line in the definition of `param_integer_error' in gdb.guile/scm-parameter.exp. No functional change. 2022-10-29 Tsukasa OI sim/sh: Remove redundant function declaration Clang generates a warning if there is a function declaration/definition with zero arguments. Such declarations/definitions without a prototype (an argument list) are deprecated forms of indefinite arguments ("-Wdeprecated-non-prototype"). On the default configuration, it causes a build failure (unless "--disable-werror" is specified). But there is another issue. This function declaration in sim/sh/interp.c is completely redundant. This commit just removes that declaration. 2022-10-29 Tsukasa OI sim/m32r: Initialize "list" variable The variable "list" is only initialized when arg1 > 0 and when arg1 == 0, an uninitialized value is passed to translate_endian_h2t function. Although this behavior is harmless, this commit adds initialization to avoid a GCC warning ("-Wmaybe-uninitialized"). 2022-10-29 Tsukasa OI sim/erc32: Use int32_t as IRQ callback argument Clang generates a warning if an argument is passed to a function without prototype (zero arguments, even without (void)). Such calls are deprecated forms of indefinite arguments passing ("-Wdeprecated-non-prototype"). On the default configuration, it (somehow) doesn't cause a build failure but a warning is generated. But because the cause is the same as the issue the author fixed in "sim/erc32: Use int32_t as event callback argument", it would be better to fix it now to prevent problems in the future. To fix the issue, this commit makes struct irqcall to use int32_t as a callback (callback) argument of an IRQ. 2022-10-29 Tsukasa OI sim/erc32: Use int32_t as event callback argument Clang generates a warning if an argument is passed to a function without prototype (zero arguments, even without (void)). Such calls are deprecated forms of indefinite arguments passing ("-Wdeprecated-non-prototype"). On the default configuration, it causes a build failure (unless "--disable-werror" is specified). To fix that, this commit makes struct evcell to use int32_t as a callback (cfunc) argument of an event. int32_t is chosen because "event" function accepts "int32_t arg". 2022-10-29 Tsukasa OI sim/erc32: Insert void parameter Clang generates a warning if there is a function declaration/definition with zero arguments. Such declarations/definitions without a prototype (an argument list) are deprecated forms of indefinite arguments ("-Wdeprecated-non-prototype"). On the default configuration, it causes a build failure (unless "--disable-werror" is specified). This commit replaces () with (void) to avoid this warning. 2022-10-29 Tom de Vries [gdb/testsuite] Use ssh -t in remote-*.exp When running test-case gdb.server/multi-ui-errors.exp on target board remote-gdbserver-on-localhost.exp, I run into: ... (gdb) PASS: gdb.server/multi-ui-errors.exp: connect to gdbserver continue^M Continuing.^M PASS: gdb.server/multi-ui-errors.exp: continue - extra UI Remote debugging from host ::1, port 35466^M FAIL: gdb.server/multi-ui-errors.exp: ensure inferior is running ... The problem is that the target board uses ssh -T, which fails to guarantee that output from the inferior will be available. Fix this by copying proc ${board}_spawn from local-remote-host.exp, which ensures using ssh -t. [ It would be nice to define an ssh base board to get rid of the copies, but I'm not addressing that in this commit. ] Likewise for target board remote-stdio-gdbserver.exp. Tested on x86_64-linux. 2022-10-29 Tom de Vries [gdb/testsuite] Fix gdb.server/multi-ui-errors.exp with local-remote-host-notty With test-case gdb.server/multi-ui-errors.exp and host board local-remote-host-notty, I run into: ... (gdb) PASS: gdb.server/multi-ui-errors.exp: interact with GDB's main UI Executing on target: kill -9 29666 (timeout = 300) builtin_spawn -ignore SIGHUP kill -9 29666^M echo^M Remote connection closed^M (gdb) (gdb) FAIL: gdb.server/multi-ui-errors.exp: \ main UI, prompt after gdbserver dies (timeout) ... In contrast, with local-remote-host (so, everything the same but editing off): ... (gdb) PASS: gdb.server/multi-ui-errors.exp: interact with GDB's main UI Executing on target: kill -9 31245 (timeout = 300) builtin_spawn -ignore SIGHUP kill -9 31245^M Remote connection closed^M (gdb) echo^M (gdb) PASS: gdb.server/multi-ui-errors.exp: main UI, prompt after gdbserver dies ... The test-case issues a kill, which results in a "Remote connection closed" message and a prompt. The problem is that the prompt is not consumed, so the subsequent echo may be issued before that prompt, which causes a mismatch when matching the result of the echo. Fix this by consuming the "Remote connection closed" message and prompt. Tested on x86_64-linux. 2022-10-29 Tom de Vries [gdb/testsuite] Consume output asap in gdb.server/multi-ui-errors.exp With test-case gdb.server/multi-ui-errors.exp we see: ... (gdb) PASS: multi-ui-errors.exp: main UI, prompt after gdbserver dies continue^M Continuing.^M echo^M (gdb) PASS: multi-ui-errors.exp: extra UI, prompt after gdbserver dies ... The continue is issued earlier in the test-case, but the output has not been consumed, which makes it show up much later. Consume the continue output asap, to make it clear when the continue is issued: ... (gdb) PASS: gdb.server/multi-ui-errors.exp: connect to gdbserver continue^M Continuing.^M PASS: gdb.server/multi-ui-errors.exp: continue - extra UI ... Tested on x86_64-linux. 2022-10-29 Tom de Vries [gdb/testsuite] Remove REMOTE_PORTNUM in remote-stdio-gdbserver.exp The usage for board remote-stdio-gdbserver.exp is advertised as: ... # bash$ make check RUNTESTFLAGS="--target_board=remote-stdio-gdbserver \ # REMOTE_USERNAME=... REMOTE_HOSTNAME=... REMOTE_PORTNUM=... \ # [REMOTE_TMPDIR=${remote_dir}] [GDBSERVER=${remote_gdbserver}]" ... but when adding REMOTE_PORTNUM=22, I run into: ... Running stop-reply-no-thread-multi.exp ... ERROR: tcl error sourcing stop-reply-no-thread-multi.exp. ERROR: couldn't execute "/usr/bin/ssh -p22": no such file or directory while executing "builtin_spawn {/usr/bin/ssh -p22} -l vries localhost {/usr/bin/gdbserver \ --once localhost:2346 \ /home/vries/gdb_versions/devel/build/gdb/testsuite/outp..." ... Fix this by simply removing REMOTE_PORTNUM. Tested on x86_64-linux. 2022-10-29 Tsukasa OI sim, sim/{m32c,ppc,rl78}: Use getopt_long Because of a Libiberty hack, getopt on GNU libc (2.25 or earlier) is currently unusable on sim, causing a regression on CentOS 7. This is caused as follows: 1. If HAVE_DECL_GETOPT is defined (getopt declaration with known prototype is detected while configuration), a declaration of getopt in "include/getopt.h" is suppressed. The author started to define HAVE_DECL_GETOPT in sim with the commit 340aa4f6872c ("sim: Check known getopt definition existence"). 2. GNU libc (2.25 or earlier)'s includes with a special purpose macro defined to declare only getopt function but due to include path (not tested while configuration), it causes to include Libiberty's "include/getopt.h". 3. If both 1. and 2. are satisfied, despite that tries to declare getopt by including , "include/getopt.h" does not do so, causing getopt function undeclared. Getting rid of "include/getopt.h" (e.g. renaming this header file) is the best solution to avoid hacking but as a short-term solution, this commit replaces getopt with getopt_long under sim/. 2022-10-29 Alan Modra pef: sanity check before malloc And do the sanity check in a way that can't overflow. * pef.c (bfd_pef_parse_function_stubs): Sanity check header imported_library_count and total_imported_symbol_count before allocating memory. 2022-10-29 Alan Modra Fix small objcopy memory leak * objcopy.c (copy_archive): Free l->name. 2022-10-29 Alan Modra NULL dereference read in som_write_object_contents objcopy copy_object may omit the call to bfd_copy_private_bfd_data for various conditions deemed non-fatal, in which case obj_som_exec_data will be NULL for the output file. * som.c (som_finish_writing): Don't dereference NULL obj_som_exec_data. 2022-10-29 Nelson Chu RISC-V: Always generate mapping symbols at the start of the sections. Before figuring out the suppress rule of mapping symbol with architecture (changed back to $x), always generate them at the start of the sections. gas/ * config/tc-riscv.c (need_arch_map_symbol): Removed. (riscv_mapping_state): Updated. (riscv_check_mapping_symbols): Updated. * testsuite/gas/riscv/mapping-non-arch.d: Removed. * testsuite/gas/riscv/mapping-non-arch.s: Likewise. 2022-10-29 GDB Administrator Automatic date update in version.in 2022-10-28 Palmer Dabbelt gas: NEWS: Note support for RISC-V Zawrs This has been supported since eb668e50036 ("RISC-V: Add Zawrs ISA extension support"). gas: NEWS: Add a missing newline 2022-10-28 Tom Tromey Convert compunit_language to a method This changes compunit_language to be a method on compunit_symtab. Approved-By: Simon Marchi 2022-10-28 Tsukasa OI RISC-V: Improve "bits undefined" diagnostics This commit improves internal error message "internal: bad RISC-V opcode (bits 0x%lx undefined): %s %s" to display actual unused bits (excluding non-instruction bits). gas/ChangeLog: * config/tc-riscv.c (validate_riscv_insn): Exclude non- instruction bits from displaying internal diagnostics. Change error message slightly. 2022-10-28 Tsukasa OI RISC-V: Fallback for instructions longer than 64b We don't support instructions longer than 64-bits yet. Still, we can modify validate_riscv_insn function to prevent unexpected behavior by limiting the "length" of an instruction to 64-bit (or less). gas/ChangeLog: * config/tc-riscv.c (validate_riscv_insn): Fix function description comment based on current spec. Limit instruction length up to 64-bit for now. Make sure that required_bits does not corrupt even if unsigned long long is longer than 64-bit. 2022-10-28 Jan Beulich RISC-V/gas: fix build with certain gcc versions Some versions of gcc warn by default about shadowed outer-scope declarations. This affects frag_align_code, which is declared in frags.h. Rename the offending function parameter. While there also switch to using true/false at the function call sites. 2022-10-28 Tsukasa OI RISC-V: Fix build failure for -Werror=maybe-uninitialized Commit 40f1a1a4564b ("RISC-V: Output mapping symbols with ISA string.") caused a build failure on GCC 12 as follows: make[3]: Entering directory '$(builddir)/gas' CC config/tc-riscv.o In file included from $(srcdir)/gas/config/tc-riscv.c:23: $(srcdir)/gas/as.h: In function ‘make_mapping_symbol’: $(srcdir)/gas/as.h:123:15: error: ‘buff’ may be used uninitialized [-Werror=maybe-uninitialized] 123 | #define xfree free | ^~~~ $(srcdir)/gas/config/tc-riscv.c:487:9: note: ‘buff’ was declared here 487 | char *buff; | ^~~~ cc1: all warnings being treated as errors make[3]: *** [Makefile:1425: config/tc-riscv.o] Error 1 This is caused by a false positive of "maybe uninitialized" variable detection (-Wmaybe-uninitialized). To avoid this error, this commit initializes the local variable buff to NULL first in all cases. gas/ChangeLog: * config/tc-riscv.c (make_mapping_symbol): Initialize variable buff with NULL to avoid build failure caused by a GCC's false positive of maybe uninitialized variable detection. 2022-10-28 Markus Metzger gdb, btrace: fix family and model computation In gdb/nat/linux-btrace.c:btrace_this_cpu() we initialize the cpu structure given to the libipt btrace decoder. We only consider the extended model field for family 0x6 and forget about family 0xf and we don't consider the extended family field. Fix it. 2022-10-28 Tsukasa OI include: Define macro to ignore -Wdeprecated-declarations on GCC "-Wdeprecated-declarations" warning option can be helpful to track deprecated function delarations but sometimes we need to disable this warning for a good reason. DIAGNOSTIC_IGNORE_DEPRECATED_DECLARATIONS is an existing macro but only defined on Clang. Since "-Wdeprecated-declarations" is also available on GCC (>= 3.4.0), this commit adds equivalent definition as Clang. __GNUC__ and __GNUC_MINOR__ are not checked because this header file seems to assume GCC >= 4.6 (with "GCC diagnostic push/pop"). include/ChangeLog: * diagnostics.h (DIAGNOSTIC_IGNORE_DEPRECATED_DECLARATIONS): Define also on GCC. 2022-10-28 Nelson Chu RISC-V: Output mapping symbols with ISA string. RISC-V Psabi pr196, https://github.com/riscv-non-isa/riscv-elf-psabi-doc/pull/196 bfd/ * elfxx-riscv.c (riscv_release_subset_list): Free arch_str if needed. (riscv_copy_subset_list): Copy arch_str as well. * elfxx-riscv.h (riscv_subset_list_t): Store arch_str for each subset list. gas/ * config/tc-riscv.c (riscv_reset_subsets_list_arch_str): Update the architecture string in the subset_list. (riscv_set_arch): Call riscv_reset_subsets_list_arch_str after parsing new architecture string. (s_riscv_option): Likewise. (need_arch_map_symbol): New boolean, used to indicate if .option directives do affect instructions. (make_mapping_symbol): New boolean parameter reset_seg_arch_str. Need to generate $x+arch for MAP_INSN, and then store it into tc_segment_info_data if reset_seg_arch_str is true. (riscv_mapping_state): Decide if we need to add $x+arch for MAP_INSN. For now, only add $x+arch if the architecture strings in subset list and segment are different. Besides, always add $x+arch at the start of section, and do not add $x+arch for code alignment, since rvc for alignment can be judged from addend of R_RISCV_ALIGN. (riscv_remove_mapping_symbol): If current and previous mapping symbol have same value, then remove the current $x only if the previous is $x+arch; Otherwise, always remove previous. (riscv_add_odd_padding_symbol): Updated. (riscv_check_mapping_symbols): Don't need to add any $x+arch if need_arch_map_symbol is false, so changed them to $x. (riscv_frag_align_code): Updated since riscv_mapping_state is changed. (riscv_init_frag): Likewise. (s_riscv_insn): Likewise. (riscv_elf_final_processing): Call riscv_release_subset_list to release subset_list of riscv_rps_as, rather than only release arch_str in the riscv_write_out_attrs. (riscv_write_out_attrs): No need to call riscv_arch_str, just get arch_str from subset_list of riscv_rps_as. * config/tc-riscv.h (riscv_segment_info_type): Record current $x+arch mapping symbol of each segment. * testsuite/gas/riscv/mapping-0*: Merged and replaced by mapping.s. * testsuite/gas/riscv/mapping.s: New testcase, to test most of the cases in one file. * testsuite/gas/riscv/mapping-symbols.d: Likewise. * testsuite/gas/riscv/mapping-dis.d: Likewise. * testsuite/gas/riscv/mapping-non-arch.s: New testcase for the case that does need any $x+arch. * testsuite/gas/riscv/mapping-non-arch.d: Likewise. * testsuite/gas/riscv/option-arch-01a.d: Updated. opcodes/ * riscv-dis.c (riscv_disassemble_insn): Set riscv_fpr_names back to riscv_fpr_names_abi or riscv_fpr_names_numeric when zfinx is disabled for some specfic code region. (riscv_get_map_state): Recognized mapping symbols $x+arch, and then reset the architecture string once the ISA is different. 2022-10-28 Lifang Xia binutils: Update my e-mail and Yunhai's e-mail binutils/ * MAINTAINERS(C-SKY): update e-mails of Lifang & Yunhai. 2022-10-28 Peter Bergner PowerPC: Add support for RFC02658 - MMA+ Outer-Product Instructions gas/ * config/tc-ppc.c (md_assemble): Only check for prefix opcodes. * testsuite/gas/ppc/rfc02658.s: New test. * testsuite/gas/ppc/rfc02658.d: Likewise. * testsuite/gas/ppc/ppc.exp: Run it. opcodes/ * ppc-opc.c (XMSK8, P_GERX4_MASK, P_GERX2_MASK, XX3GERX_MASK): New. (powerpc_opcodes): Add dmxvi8gerx4pp, dmxvi8gerx4, dmxvf16gerx2pp, dmxvf16gerx2, dmxvbf16gerx2pp, dmxvf16gerx2np, dmxvbf16gerx2, dmxvi8gerx4spp, dmxvbf16gerx2np, dmxvf16gerx2pn, dmxvbf16gerx2pn, dmxvf16gerx2nn, dmxvbf16gerx2nn, pmdmxvi8gerx4pp, pmdmxvi8gerx4, pmdmxvf16gerx2pp, pmdmxvf16gerx2, pmdmxvbf16gerx2pp, pmdmxvf16gerx2np, pmdmxvbf16gerx2, pmdmxvi8gerx4spp, pmdmxvbf16gerx2np, pmdmxvf16gerx2pn, pmdmxvbf16gerx2pn, pmdmxvf16gerx2nn, pmdmxvbf16gerx2nn. 2022-10-28 Peter Bergner PowerPC: Add support for RFC02653 - Dense Math Facility gas/ * config/tc-ppc.c (pre_defined_registers): Add dense math registers. (md_assemble): Check dmr specified in correct operand. * testsuite/gas/ppc/outerprod.s : Add new tests. * testsuite/gas/ppc/outerprod.d: Likewise. * testsuite/gas/ppc/rfc02653.s: New test. * testsuite/gas/ppc/rfc02653.d: Likewise. * testsuite/gas/ppc/ppc.exp: Run it. include/ * opcode/ppc.h (PPC_OPERAND_DMR): Define. Renumber following PPC_OPERAND defines. opcodes/ * ppc-dis.c (print_insn_powerpc): Prepend 'dm' when printing DMR regs. * ppc-opc.c (insert_p2, (extract_p2, (insert_xa5, (extract_xa5, insert_xb5, (extract_xb5): New functions. (insert_xa6a, extract_xa6a, insert_xb6a, extract_xb6a): Disallow operand overlap only on Power10. (DMR, DMRAB, P1, P2, XA5p, XB5p, XDMR_MASK, XDMRDMR_MASK, XX2ACC_MASK, XX2DMR_MASK, XX3DMR_MASK): New defines. (powerpc_opcodes): Add dmmr, dmsetaccz, dmsetdmrz, dmxor, dmxvbf16ger2, dmxvbf16ger2nn, dmxvbf16ger2np, dmxvbf16ger2pn, dmxvbf16ger2pp, dmxvf16ger2, dmxvf16ger2nn, dmxvf16ger2np, dmxvf16ger2pn, dmxvf16ger2pp, dmxvf32ger, dmxvf32gernn, dmxvf32gernp, dmxvf32gerpn, dmxvf32gerpp, dmxvf64ger, dmxvf64gernn, dmxvf64gernp, dmxvf64gerpn, dmxvf64gerpp, dmxvi16ger2, dmxvi16ger2pp, dmxvi16ger2s, dmxvi16ger2spp, dmxvi4ger8, dmxvi4ger8pp, dmxvi8ger4, dmxvi8ger4pp, dmxvi8ger4spp, dmxxextfdmr256, dmxxextfdmr512, dmxxinstdmr256, dmxxinstdmr512, dmxxmfacc, dmxxmtacc, pmdmxvbf16ger2, pmdmxvbf16ger2nn, pmdmxvbf16ger2np, pmdmxvbf16ger2pn, pmdmxvbf16ger2pp, pmdmxvf16ger2, pmdmxvf16ger2nn, pmdmxvf16ger2np, pmdmxvf16ger2pn, pmdmxvf16ger2pp, pmdmxvf32ger, pmdmxvf32gernn, pmdmxvf32gernp, pmdmxvf32gerpn, pmdmxvf32gerpp, pmdmxvf64ger, pmdmxvf64gernn, pmdmxvf64gernp, pmdmxvf64gerpn, pmdmxvf64gerpp, pmdmxvi16ger2, pmdmxvi16ger2pp, pmdmxvi16ger2s, pmdmxvi16ger2spp, pmdmxvi4ger8, pmdmxvi4ger8pp, pmdmxvi8ger4, pmdmxvi8ger4pp, pmdmxvi8ger4spp. 2022-10-28 GDB Administrator Automatic date update in version.in 2022-10-27 Andrew Burgess sim/cgen: initialize variable at creation in engine_run_n Zero initialize engine_fns entirely at creation, then override those fields we intend to use, rather than zero just initializing the unused fields later on. There should be no user visible changes after this commit. 2022-10-27 Tom de Vries [gdb/testsuite] Remove address from test names I noticed an address in a test name: ... PASS: gdb.base/eh_return.exp: gdb_breakpoint: \ set breakpoint at *0x000000000040071b ... Stabilize the test name by using "set breakpoint on address" instead. Likewise in two other test-cases. Tested on x86_64-linux. 2022-10-27 Tom de Vries [gdb/testsuite] Disable styling in host board local-remote-host-native.exp Propagate fix from commit 17c68d98f74 ("[gdb/testsuite] Disable styling in host board local-remote-host.exp") to local-remote-host-native.exp. Tested on x86_64-linux. 2022-10-27 Tom de Vries [gdb/testsuite] Fix silent timeouts in gdb.mi/mi-exec-run.exp with remote host I noticed that running test-case gdb.mi/mi-exec-run.exp with host board local-remote-host.exp takes about 44 seconds. I found two silent timeouts responsible for this. The first is in mi_gdb_exit, where we have: ... if { [is_remote host] && [board_info host exists fileid] } { send_gdb "999-gdb-exit\n" gdb_expect 10 { -re "y or n" { send_gdb "y\n" exp_continue } -re "Undefined command.*$gdb_prompt $" { send_gdb "quit\n" exp_continue } -re "DOSEXIT code" { } } } ... so in gdb.log we see: ... 999-gdb-exit^M 999^exit^M =thread-exited,id="1",group-id="i1"^M =thread-group-exited,id="i1"^M ... after which expect just waits for the timeout. Fix this by adding a gdb_expect clause to parse the exit: ... -re "\r\n999\\^exit\r\n" { } ... Note that we're not parsing the thread-exited/thread-group-exited messages, because they may not be present: ... $ gdb -i=mi =thread-group-added,id="i1" (gdb) 999-gdb-exit 999^exit $ ... After fixing that, we have: ... (gdb) ^M saw mi error PASS: gdb.mi/mi-exec-run.exp: inferior-tty=separate: mi=separate: \ force-fail=1: run failure detected quit^M &"quit\n"^M ... What seems to be happening is that default_gdb_exit sends a cli interpreter quit command to an mi interpreter, after which again expect just waits for the timeout. Fix this by adding mi_gdb_exit to the end of the test-case, as in many other gdb.mi/*.exp test-cases. After these two fixes, the test-case takes about 4 seconds. Tested on x86_64-linux. 2022-10-27 Tom de Vries [gdb/testsuite] Use remote_exec chmod instead of remote_spawn I build gdb using -O2, and ran the testsuite using taskset -c 0, and ran into: ... (gdb) PASS: gdb.server/connect-with-no-symbol-file.exp: sysroot=: \ action=delete: setup: adjust sysroot builtin_spawn gdbserver --once localhost:2385 /connect-with-no-symbol-file^M /bin/bash: connect-with-no-symbol-file: Permission denied^M /bin/bash: line 0: exec: connect-with-no-symbol-file: cannot execute: \ Permission denied^M During startup program exited with code 126.^M Exiting^M target remote localhost:2385^M `connect-with-no-symbol-file' has disappeared; keeping its symbols.^M localhost:2385: Connection timed out.^M (gdb) FAIL: gdb.server/connect-with-no-symbol-file.exp: sysroot=: \ action=delete: connection to GDBserver succeeded ... The expected series of events is (skipping disconnect and detach as I don't think they're relevant to the problem): - enter scenario "permission" - cp $exec.bak $exec - gdbserver start with $exec - chmod 000 $exec - connect to gdbserver - enter scenario "delete" - cp $exec.bak $exec - gdbserver start with $exec - delete $exec - connect to gdbserver The problem is that the chmod is executed using remote_spawn: ... } elseif { $action == "permission" } { remote_spawn target "chmod 000 $target_exec" } ... without waiting on the resulting spawn id, so we're not sure when the chmod will have effect. The FAIL we're seeing above is explained by the chmod having effect during the delete scenario, after the "cp $exec.bak $exec" and before the "gdbserver start with $exec". Fix this by using remote_exec instead. Likewise, fix a similar case in gdb.mi/mi-exec-run.exp. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29726 2022-10-27 Nelson Chu RISC-V: Fix build failures for -Werror=sign-compare. elfnn-riscv.c: In function ‘riscv_relax_resolve_delete_relocs’: elfnn-riscv.c:4256:30: error: operand of ‘?:’ changes signedness from ‘int’ to ‘unsigned int’ due to unsignedness of other operand [-Werror=sign-compare] So make the operands unsigned could resolve problem. bfd/ * elfnn-riscv.c (riscv_relax_resolve_delete_relocs): Fixed build failures for -Werror=sign-compare. 2022-10-27 Alan Modra Fuzzed files in archives Given a fuzzed object file in an archive with section size exceeding file size, objcopy will report an error like "section size (0xfeffffff bytes) is larger than file size (0x17a bytes)" but will create a copy of the object laid out for the large section. That means a large temporary file on disk that is read back and written to the output archive, which can take a while. The output archive is then deleted due to the error. Avoid some of this silliness. * objcopy.c (copy_section): If section contents cannot be read set output section size to zero. 2022-10-27 Martin Liska tests: use canonical option name ld/ChangeLog: * testsuite/ld-size/size.exp: Use canonical option name. 2022-10-27 Alan Modra re: Support Intel AMX-FP16 Fix these fails due to the target padding out sections with nops. x86_64-w64-mingw32 +FAIL: x86_64 AMX-FP16 insns x86_64-w64-mingw32 +FAIL: x86_64 AMX-FP16 insns (Intel disassembly) * testsuite/gas/i386/x86-64-amx-fp16-intel.d: Accept trailing nops. * testsuite/gas/i386/x86-64-amx-fp16.d: Likewise. 2022-10-27 Alan Modra Re: ld/testsuite: adjust ld-arm to run shared tests only when supported commit 67527cffcd enabled previously disabled tests unresolved-1-dyn, thumb-plt and thumb-plt-got for nacl. The first fails due to trying to link against mixed-lib.so which isn't compiled for nacl. The last two fail with objdump: tmpdir/dump(.rel.plt): relocation 0 has invalid symbol index 14885104 and readelf: Error: bad symbol index: 00e320f0 in reloc Relocation section '.rel.plt' at offset 0x128 contains 1 entry: Offset Info Type Sym. Value Symbol's Name e320f000 e320f000 R_ARM_NONE * testsuite/ld-arm/arm-elf.exp: Disable unresolved-1-dyn, thumb-plt and thumb-plt-got for nacl. 2022-10-27 GDB Administrator Automatic date update in version.in 2022-10-26 Simon Marchi gdb/testsuite: fix gdb.guile/scm-parameter.exp "wrong type argument" test pattern for Guile >= 2.2 Since commit 90319cefe3 ("GDB/Guile: Don't assert that an integer value is boolean"), I see: FAIL: gdb.guile/scm-parameter.exp: kind=PARAM_ZINTEGER: test-PARAM_ZINTEGER-param: guile (set-parameter-value! test-PARAM_ZINTEGER-param #:unlimited) FAIL: gdb.guile/scm-parameter.exp: kind=PARAM_ZUINTEGER: test-PARAM_ZUINTEGER-param: guile (set-parameter-value! test-PARAM_ZUINTEGER-param #:unlimited) This comes from the fact that GDB outputs this: ERROR: In procedure set-parameter-value!: In procedure gdbscm_set_parameter_value_x: Wrong type argument in position 2 (expecting integer): #:unlimited Error while executing Scheme code. while the test expects an additional "ERROR:" on the second line, something like this: ERROR: In procedure set-parameter-value!: ERROR: In procedure gdbscm_set_parameter_value_x: Wrong type argument in position 2 (expecting integer): #:unlimited Error while executing Scheme code. Guile 2.0 outputs the `ERROR:` on the second line, while later versions do not. Change the pattern to accept both outputs. This is similar to commit 6bbe1a929c6 ("[gdb/testsuite] Fix gdb.guile/scm-breakpoint.exp with guile 3.0"). Change-Id: I9dc45e7492a4f08340cad974610242ed689de959 2022-10-26 Luis Machado gdb/arm: Fix M-profile EXC_RETURN Arm v8-M Architecture Reference Manual, D1.2.95 EXC_RETURN, Exception Return Payload describes ES bit: "ES, bit [0] Exception Secure. The security domain the exception was taken to. The possible values of this bit are: 0 Non-secure. 1 Secure" arm-tdep.c:3443, arm_m_exception_cache () function tests this bit: exception_domain_is_secure = (bit (lr, 0) == 0); The test is negated! Later on line 3553, the condition evaluates if an additional state context is stacked: /* With the Security extension, the hardware saves R4..R11 too. */ if (tdep->have_sec_ext && secure_stack_used && (!default_callee_register_stacking || exception_domain_is_secure)) RM, B3.19 Exception entry, context stacking reads: RPLHM "In a PE with the Security Extension, on taking an exception, the PE hardware: ... 2. If exception entry requires a transition from Secure state to Non-secure state, the PE hardware extends the stack frame and also saves additional state context." So we should test for !exception_domain_is_secure instead of non-negated value! These two bugs compensate each other so unstacking works correctly. But another test of exception_domain_is_secure (negated due to the first bug) prevents arm_unwind_secure_frames to work as expected: /* Unwinding from non-secure to secure can trip security measures. In order to avoid the debugger being intrusive, rely on the user to configure the requested mode. */ if (secure_stack_used && !exception_domain_is_secure && !arm_unwind_secure_frames) Test with GNU gdb (GDB) 13.0.50.20221016-git. Stopped in a non-secure handler: (gdb) set arm unwind-secure-frames 0 (gdb) bt #0 HAL_SYSTICK_Callback () at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/NonSecure/Src/nsmain.c:490 #1 0x0804081c in SysTick_Handler () at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/NonSecure/Src/nsstm32l5xx_it.c:134 #2 #3 HAL_GPIO_ReadPin (GPIOx=0x52020800, GPIO_Pin=8192) at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/Drivers/STM32L5xx_HAL_Driver/Src/stm32l5xx_hal_gpio.c:386 #4 0x0c000338 in SECURE_Mode () at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/Secure/Src/main.c:86 #5 0x080403f2 in main () at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/NonSecure/Src/nsmain.c:278 Backtrace stopped: previous frame inner to this frame (corrupt stack?) The frames #3 and #4 are secure. backtrace should stop before #3. Stopped in a secure handler: (gdb) bt #0 HAL_SYSTICK_Callback () at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/Secure/Src/main.c:425 #1 0x0c000b6a in SysTick_Handler () at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/Secure/Src/stm32l5xx_it.c:234 warning: Non-secure to secure stack unwinding disabled. #2 The exception from secure to secure erroneously stops unwinding. It should continue as far as the security unlimited backtrace: (gdb) set arm unwind-secure-frames 1 (gdb) si <-- used to rebuild frame cache after change of unwind-secure-frames 0x0c0008e6 425 if (SecureTimingDelay != 0U) (gdb) bt #0 0x0c0008e6 in HAL_SYSTICK_Callback () at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/Secure/Src/main.c:425 #1 0x0c000b6a in SysTick_Handler () at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/Secure/Src/stm32l5xx_it.c:234 #2 #3 0x0c000328 in SECURE_Mode () at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/Secure/Src/main.c:88 #4 0x080403f2 in main () at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/NonSecure/Src/nsmain.c:278 Backtrace stopped: previous frame inner to this frame (corrupt stack?) Set exception_domain_is_secure to the value expected by its name. Fix exception_domain_is_secure usage in the additional state context stacking condition. 2022-10-26 Luis Machado gdb/arm: fix IPSR field test in arm_m_exception_cache () Arm v8-M Architecture Reference Manual, D1.2.141 IPSR, Interrupt Program Status Register reads "Exception, bits [8:0]" 9 bits, not 8! It is uncommon but true! 2022-10-26 Luis Machado gdb/arm: Terminate frame unwinding in M-profile lockup In the lockup state the PC value of the the outer frame is irreversibly lost. The other registers are intact so LR likely contains PC of some frame next to the outer one, but we cannot analyze the nearest outer frame without knowing its PC therefore we do not know SP fixup for this frame. The frame unwinder possibly gets mad due to the wrong SP value. To prevent problems terminate unwinding if PC contains the magic value of the lockup state. Example session wihtout this change, Cortex-M33 CPU in lockup, gdb 13.0.50.20221016-git: ---------------- (gdb) c Continuing. Program received signal SIGINT, Interrupt. 0xeffffffe in ?? () (gdb) bt #0 0xeffffffe in ?? () #1 0x0c000a9c in HardFault_Handler () at C:/dvl/stm32l5trustzone/GPIO_IOToggle_TrustZone/Secure/Src/stm32l5xx_it.c:99 #2 0x2002ffd8 in ?? () Backtrace stopped: previous frame identical to this frame (corrupt stack?) (gdb) ---------------- The frame #1 is at correct PC taken from LR, #2 is a total nonsense. With the change: ---------------- (gdb) c Continuing. Program received signal SIGINT, Interrupt. warning: ARM M in lockup state, stack unwinding terminated. (gdb) bt #0 (gdb) ---------------- There is a visible drawback of emitting a warning in a cache buildnig routine as introduced in Torbjörn SVENSSON's [PATCH v4] gdb/arm: Stop unwinding on error, but do not assert The warning is printed just once and not repeated on each backtrace command. 2022-10-26 Mike Frysinger gdb: copyright: make file header scan a bit more pythonic Should be functionally the same, but uses more pythonic idioms to get fewer lines of code, and to make sure to not leak open file handles. Approved-By: Simon Marchi 2022-10-26 Mike Frysinger gdb: make copyright.py interface a bit nicer This way people can run `./copyright.py --help` and get some info as to what this does without it going and modifying the tree. sim: testsuite: improve parallel test processing The current logic limits itself to a maxdepth of 4 when looking for results. This wouldn't be a problem if cris didn't have a testsuite at a depth of 5 which we end up ignoring when summarizing. Rather than bump the number from 4 to 5, rework the code so that we gather the exact set of tests that we tried to run. 2022-10-26 Alan Modra buffer overflow in _bfd_XX_print_ce_compressed_pdata More fuzzed fun. * peXXigen.c (_bfd_XX_print_ce_compressed_pdata): Use smaller of virt_size and bfd section size as limit of function table. 2022-10-26 Alan Modra Correct ELF reloc size sanity check The external reloc size check was wrong. Here asect is the code/data section, not the reloc section. So using this_hdr gave the size of the code/data section. * elf.c (_bfd_elf_get_reloc_upper_bound): Properly get external size from reloc headers. 2022-10-26 Alan Modra segfault in objdump.c reloc_at bfd_canonicalize_reloc returns -1L on errors. * objdump.c (load_specific_debug_section): Properly handle error return from bfd_canonicalize_reloc. 2022-10-26 Alan Modra som.c reloc sanity checking This patch checks that relocations emitted in som_write_fixups have offsets that are monotonic and within a section. To do that properly using bfd_reloc_offset_in_range it is necessary to set the reloc howto size field, which isn't used otherwise by the som backend. Note that the sizes used are not exactly those in the old sizing switch statement deleted from som_write_fixups, but all relocs handled by the main switch statement there get the same size. Most unhandled relocs get a zero size (exceptions being R_RELOCATION, R_SPACE_REF, R_MILLI_REL, R_BREAKPOINT which all involve writing one word according to my SOM reference). I figure it doesn't matter since any unhandled reloc is converted to 0xff R_RESERVED, and a default of zero is better for a "don't know" reloc. Besides tidying the code, stringizing name from type in SOM_HOWTO fixes R_REPEATED_INIT name. * som.c (SOM_HOWTO): Add SIZE arg, delete NAME. Stringize type to name. (som_hppa_howto_table): Update with sizes. (som_write_fixups): Delete sizing switch statement. Sanity check bfd_reloc address against subsection size. 2022-10-26 Alan Modra som.c buffer overflow Fuzzed object files can put random values in bfd_reloc->address, leading to large som_reloc_skip output. * som.c (som_write_fixups): Allow for maximal som_reloc_skip. 2022-10-26 Alan Modra PR29720, objdump -S crashes if build-id is missing PR 29720 * objdump.c (slurp_file): Don't call debuginfod_find_source when build_id is NULL. 2022-10-26 GDB Administrator Automatic date update in version.in 2022-10-25 Simon Marchi gdb: remove spurious spaces after frame_info_ptr Fix some whitespace issues introduced with the frame_info_ptr patch. Change-Id: I158d30d8108c97564276c647fc98283ff7b12163 2022-10-25 Michael Matz x86-64: Use only one default max-page-size On x86-64 the default ELF_MAXPAGESIZE depends on a configure option (--disable-separate-code). Since 9833b775 ("PR28824, relro security issues") we use max-page-size for relro alignment (with a short interval, from 31b4d3a ("PR28824, relro security issues, x86 keep COMMONPAGESIZE relro") to its revert a1faa5ea, where x86-64 only used COMMONPAGESIZE as relro alignment target). But that means that a linker configured with --disable-separate-code behaves different from one configured with --enable-separate-code (the default), _even if using "-z {no,}separate-code" option to use the non-configured behaviour_ . In particular it means that when configuring with --disable-separate-code the linker will produce binaries aligned to 2MB pages on disk, and hence generate 2MB executables for a hello world (and even 6MB when linked with "-z separate-code"). Generally we can't have constants that ultimately land in static variables be depending on configure options if those only influence behaviour that is overridable by command line options. So, do away with that, make the default MAXPAGESIZE be 4k (as is default for most x86-64 configs anyway, as most people won't configure with --disable-separate-code). If people need more they can use the "-z max-page-size" (with would have been required right now for a default configure binutils). bfd/ * elf64-x86-64.c (ELF_MAXPAGESIZE): Don't depend on DEFAULT_LD_Z_SEPARATE_CODE. 2022-10-25 Simon Marchi gdb/testsuite: make sure to consume the prompt in gdb.base/unwind-on-each-insn.exp This test fails quite reliably for me when ran as: $ taskset -c 1 make check TESTS="gdb.base/unwind-on-each-insn.exp" RUNTESTFLAGS="--target_board=native-gdbserver" or more simply: $ make check-read1 TESTS="gdb.base/unwind-on-each-insn.exp" The problem is that the gdb_test_multiple call that grabs the frame id from "maint print frame-id" does not consume the prompt. Well, it does sometimes due to the trailing .*, but not always. If the prompt is not consumed, the tests that follow get confused: FAIL: gdb.base/unwind-on-each-insn.exp: gdb_breakpoint: set breakpoint at *foo FAIL: gdb.base/unwind-on-each-insn.exp: disassemble foo FAIL: gdb.base/unwind-on-each-insn.exp: get $sp and frame base in foo: get hexadecimal valueof "$sp" ... many more ... Use -wrap to make gdb_test_multiple consume the prompt. While at it, remove the bit that consumes the command name and do exp_continue, it's not really necessary. And for consistency, do the same changes to the gdb_test_multiple that consumes the stack address, although that one was fine, it did consume the prompt explicitly. Change-Id: I2b7328c8844c7e98921ea494c4c05107162619fc Reviewed-By: Bruno Larsen 2022-10-25 Tom de Vries [gdb/testsuite] Handle missing .note.GNU-stack On openSUSE Tumbleweed I run into this for the dwarf assembly test-cases, and some hardcoded assembly test-cases: ... Running gdb.dwarf2/fission-absolute-dwo.exp ... gdb compile failed, ld: warning: fission-absolute-dwo.o: \ missing .note.GNU-stack section implies executable stack ld: NOTE: This behaviour is deprecated and will be removed in a future \ version of the linker === gdb Summary === # of untested testcases 1 ... Fix the dwarf assembly test-cases by adding the missing .note.GNU-stack in proc Dwarf::assemble. Fix the hard-coded test-cases using this command: ... $ for f in $(find gdb/testsuite/gdb.* -name *.S); do if ! grep -q note.GNU-stack $f; then echo -e "\t.section\t.note.GNU-stack,\"\",@progbits" >> $f; fi; done ... Likewise for .s files, and gdb/testsuite/lib/my-syscalls.S. The idiom for arm seems to be to use %progbits instead, see commit 9a5911c08be ("gdb/testsuite/gdb.dwarf2: Replace @ with % for ARM compatability"), so hand-edit gdb/testsuite/gdb.arch/arm-disp-step.S to use %progbits instead. Note that dwarf assembly testcases use %progbits as decided by proc _section. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29674 2022-10-25 Tom de Vries [gdb/testsuite] Add missing skip_gdbserver_tests in gdb.multi/attach-no-multi-process.exp I build gdb without gdbserver, and ran into: ... (gdb) PASS: gdb.multi/attach-no-multi-process.exp: target_non_stop=off: \ switch to inferior 2 spawn of --once --multi localhost:2346 failed ERROR: tcl error sourcing attach-no-multi-process.exp. ERROR: tcl error code NONE ERROR: Timeout waiting for gdbserver response. ... Add the missing skip_gdbserver_tests. Tested on x86_64-linux. 2022-10-25 Tom de Vries [gdb] Rewrite RETHROW_ON_TARGET_CLOSE_ERROR into function Recent commit b2829fcf9b5 ("[gdb] Fix rethrow exception slicing in insert_bp_location") introduced macro RETHROW_ON_TARGET_CLOSE_ERROR. I wrote this as a macro in order to have the rethrowing throw be part of the same function as the catch, but as it turns out that's not necessary. Rewrite into a function. Tested on x86_64-linux. 2022-10-25 Simon Marchi gdb: internal_error -> internal_error_loc in gdb-gdb.gdb.in Commit f34652de0b ("internal_error: remove need to pass __FILE__/__LINE__") renamed the internal_error function to internal_error_loc. Change gdb-gdb.gdb.in accordingly. Change-Id: I876e1623607b6becf74ade53d102ead53a74ed86 2022-10-25 Nelson Chu RISC-V: Should reset `again' flag for _bfd_riscv_relax_pc. The R_RISCV_DELETE relocations are no longer deleted at another relax pass, so we should reset 'again' flag to true for _bfd_riscv_relax_pc, while the deleted bytes are marked as R_RISCV_DELETE. bfd/ * elfnn-riscv.c (_bfd_riscv_relax_pc): Set `again' to true while the deleted bytes are marked as R_RISCV_DELETE. 2022-10-25 Patrick O'Neill RISC-V: Improve link time complexity. The riscv port does deletion and symbol table update for each relocation while relaxing, so we are moving section bytes and scanning symbol table once for each relocation. Compared to microblaze port, they record the relaxation changes into a table, then do the deletion and symbol table update once per section, rather than per relocation. Therefore, they should have better link time complexity than us. To improve the link time complexity, this patch try to make the deletion in linear time. Compared to record the relaxation changes into a table, we replace the unused relocation with R_RISCV_DELETE for the deleted bytes, and then resolve them at the end of the section. Assuming the number of R_RISCV_DELETE is m, and the number of symbols is n, the total link complexity should be O(m) for moving section bytes, and O(m*n^2) for symbol table update. If we record the relaxation changes into the table, and then sort the symbol table by values, then probably can reduce the time complexity to O(m*n*log(n)) for updating symbol table, but it doesn't seem worth it for now. bfd/ * elfnn-riscv.c (_riscv_relax_delete_bytes): Renamed from riscv_relax_delete_bytes, updated to reduce the tiem complexity to O(m) for memmove. (typedef relax_delete_t): Function pointer declaration of delete functions. (riscv_relax_delete_bytes): Can choose to use _riscv_relax_delete_piecewise or _riscv_relax_delete_immediate for deletion. (_riscv_relax_delete_piecewise): Just mark the deleted bytes as R_RISCV_DELETE. (_riscv_relax_delete_immediate): Delete some bytes from a section while relaxing. (riscv_relax_resolve_delete_relocs): Delete the bytes for R_RISCV_DELETE relocations from a section, at the end of _bfd_riscv_relax_section. (_bfd_riscv_relax_call): Mark deleted bytes as R_RISCV_DELETE by reusing R_RISCV_RELAX. (_bfd_riscv_relax_lui): Likewise, but reuse R_RISCV_HI20 for lui, and reuse R_RISCV_RELAX for c.lui. (_bfd_riscv_relax_tls_le): Likewise, but resue R_RISCV_TPREL_HI20 and R_RISCV_TPREL_ADD. (_bfd_riscv_relax_pc): Likewise, but resue R_RISCV_PCREL_HI20 for auipc. (_bfd_riscv_relax_align): Updated, don't need to resue relocation since calling _riscv_relax_delete_immediate. (_bfd_riscv_relax_delete): Removed. (_bfd_riscv_relax_section): Set riscv_relax_delete_bytes for each relax_func, to delete bytes immediately or later. Call riscv_relax_resolve_delete_relocs to delete bytes for DELETE relocations from a section. 2022-10-25 GDB Administrator Automatic date update in version.in 2022-10-24 Andrew Burgess gdb/doc: reword description of DisassembleInfo.read_memory While reading the documentation of DisassembleInfo.read_memory I spotted the word 'available' in one sentence where it didn't make sense. 2022-10-24 Andrew Burgess sim/lm32: fix some missing function declaration warnings In the lm32 simulator, I was seeing some warnings about missing function declarations. The lm32 simulator has a weird header structure, in order to pull in the full cpu.h header we need to define WANT_CPU_LM32BF. This is done in some files, but not in others. Critically, it's not done in some files that then use functions declared in cpu.h In this commit I added the missing #define so that the full cpu.h can be included. After doing this there are still a few functions that are used undeclared, these functions appear to be missing any declarations at all, so I've added some to cpu.h. With this done all the warnings when compiling lm32 are resolved for both gcc and clang, so I've removed the SIM_WERROR_CFLAGS line from Makefile.in, this allows lm32 to build with -Werror. 2022-10-24 Andrew Burgess sim/h8300: avoid self assignment There are two places in the h8300 simulator where we assign a variable to itself. Clang gives a warning for this, which is converted into an error by -Werror. Silence the warning by removing the self assignments. As these assignments were in a complex if/then/else tree, rather than try to adjust all the conditions, I've just replaced the self assignments with a comment and an empty statement. 2022-10-24 Andrew Burgess sim/aarch64: remove two unused functions These functions are not used. Clang warns about the unused functions, which is then converted into an error by -Werror. Delete the unused functions. 2022-10-24 Andrew Burgess sim/ppc: fix for operator precedence warning from clang In the ppc simulator, clang was warning about some code like this: busy_ptr->nr_writebacks = 1 + (PPC_ONE_BIT_SET_P(out_vmask)) ? 1 : 2; The warning was: operator '?:' has lower precedence than '+'; '+' will be evaluated first I suspect that this is not the original authors intention. PPC_ONE_BIT_SET_P is going to be 0 or 1, so if we evaluate the '+' first, the condition will always be non-zero, so true. The whole expression could then be simplified to just '1', which doesn't make much sense. I suspect the answer the author was expecting was either 2 or 3. Why they didn't just write: busy_ptr->nr_writebacks = (PPC_ONE_BIT_SET_P(out_vmask)) ? 2 : 3; I have no clue, however, to keep the structure of the code unchanged, I've updated things to: busy_ptr->nr_writebacks = 1 + (PPC_ONE_BIT_SET_P (out_vmask) ? 1 : 2); which silences the warning from clang, and is, I am guessing, what the original author intended. 2022-10-24 Andrew Burgess sim/ppc: initialize a memory buffer in all cases In the ppc simulator's do_fstat function, which provides the fstat call for the simulator, if the fstat is going to fail then we currently write an uninitialized buffer into the simulated target. In theory, I think this is fine, we also write the error status into the simulated target, so, given that the fstat has failed, the target shouldn't be relying on the buffer contents. However, writing an uninitialized buffer means we might leak simulator private data into the simulated target, which is probably a bad thing. Plus it probably makes life easier if something consistent, like all zeros, is written rather than random junk, which might look like a successful call (except for the error code). So, in this commit, I initialize the stat buffer to zero before it is potentially used. If the stat call is not made then the buffer will be left initialized as all zeros. 2022-10-24 Andrew Burgess sim/ppc: don't try to print an uninitialized variable The ppc simulator, in sim_create_inferior, tries to print the function local entry_point variable before the variable is initialized. In this commit, I defer the debug print line until the variable has been initialized. 2022-10-24 Andrew Burgess sim/sh: use fabs instead of abs The sh simulator incorrectly uses integer abs instead of the floating point fabs on some floating point values, fixed in this commit. 2022-10-24 Tom de Vries [gdb] Fix rethrow exception slicing in insert_bp_location The preferred way of rethrowing an exception is by using throw without expression, because it avoids object slicing of the exception [1]. Fix this in insert_bp_location. Tested on x86_64-linux. [1] https://en.cppreference.com/w/cpp/language/throw Approved-By: Andrew Burgess 2022-10-24 Tom de Vries [gdb] Fix rethrow exception slicing in pretty_print_insn The preferred way of rethrowing an exception is by using throw without expression, because it avoids object slicing of the exception [1]. Fix this in gdb_pretty_print_disassembler::pretty_print_insn. Tested on x86_64-linux. [1] https://en.cppreference.com/w/cpp/language/throw Approved-By: Andrew Burgess 2022-10-24 Clément Chigot ld/testsuite: adjust ld-arm to run shared tests only when supported If a custom arm-elf target is disabling the shared support, a lot of failures are reported by the testsuite. Moreover, some tests try to access libraries which have been explicitly skipped earlier (eg mixed-lib.so). ld/ChangeLog: * testsuite/ld-arm/arm-elf.exp: Separate tests needing shared lib support. 2022-10-24 Clément Chigot ld/testsuite: skip ld-elf/exclude when -shared is not supported ld/ChangeLog: * testsuite/ld-elf/exclude.exp: Call check_shared_lib_support. to skip for all targets without shared lib support. 2022-10-24 Jan Beulich x86: consolidate VPCLMUL tests There's little point in having Intel syntax disassembler tests when the purpose of a test is assembler functionality: Drop all *avx512*_vpclmulqdq-wig1-intel. For *avx512*_vpclmulqdq-wig1 share source with *avx512*_vpclmulqdq. Finally put in place similar tests for -mvexwig=1. 2022-10-24 Jan Beulich x86: consolidate VAES tests There's little point in having Intel syntax disassembler tests when the purpose of a test is assembler functionality: Drop all *avx512*_vaes-wig1-intel. For *avx512*_vaes-wig1 share source with *avx512*_vaes. This in particular makes sure that the 32-bit VL test actually tests any EVEX encodings in the first place. Finally put in place similar tests for -mvexwig=1. 2022-10-24 Jan Beulich x86: emit {evex} prefix when disassembling ambiguous AVX512VL insns When no AVX512-specific functionality is in use, the disassembly of AVX512VL insns is indistinguishable from their AVX counterparts (if such exist). Emit the {evex} pseudo-prefix in such cases. Where applicable drop stray uses of PREFIX_OPCODE from table entries. 2022-10-24 Tom de Vries [gdb/testsuite] Add skip_python_tests in gdb.python/tui-window-names.exp I did a gdb build without python support, and during testing ran into FAILs in test-case gdb.python/tui-window-names.exp. Fix this by adding the missing skip_python_test. Tested on x86_64-linux. 2022-10-24 GDB Administrator Automatic date update in version.in 2022-10-23 Mike Frysinger sim: testsuite: update ignored .exp files [PR sim/29596] Now that we run `check/foo.exp` instead of `check/./foo.exp`, update the config/ & lib/ exceptions to cover both paths. Bug: https://sourceware.org/PR29596 2022-10-23 Mike Frysinger sim: testsuite: tweak parallel find invocation [PR sim/29596] Make sure we invoke runtest with the same exp filenames when running in parallel as it will find when run single threaded. When `runtest` finds files itself, it will use paths like "aarch64/allinsn.exp". When we run `find .` with the %p option, it produces "./aarch64/allinsn.exp". Switch to %P to get "aarch64/allinsn.exp". Bug: https://sourceware.org/PR29596 2022-10-23 Mike Frysinger sim: mips/ppc/riscv: re-add AC_CANONICAL_SYSTEM [PR sim/29439] These configure scripts check $target and change behavior. They shouldn't be doing that, but until we can rework the sim to change behavior based on the input ELF, restore AC_CANONICAL_SYSTEM to these so that $target is correctly populated. This was lost in the d3562f83a7b8a1ae6e333cd5561419d3da18fcb4 ("sim: unify toolchain probing logic") refactor as the logic was hoisted up to the common code. But the fact the vars weren't passed down to the sub-configure scripts was missed. Bug: https://sourceware.org/PR29439 2022-10-23 GDB Administrator Automatic date update in version.in 2022-10-22 Simon Marchi gdb/testsuite: add max number of instructions check in gdb.base/unwind-on-each-insn.exp This test sends my CI in an infinite loop of failures. We expect to have a handful of iterations (5 on my development machine, where the test passes fine)but the log shows that it went up to 104340 iterations: FAIL: gdb.base/unwind-on-each-insn.exp - instruction 104340: maint print frame-id DUPLICATE: gdb.base/unwind-on-each-insn.exp - instruction 104340: maint print frame-id FAIL: gdb.base/unwind-on-each-insn.exp - instruction 104340: [string equal $fid $main_fid] FAIL: gdb.base/unwind-on-each-insn.exp - instruction 104340: get hexadecimal valueof "$pc" Add a max instruction check, exit the loop if we reach 100 iterations. This should allow the test to fail fast if there's a problem, but 100 iterations should be more than enough for when things are working. Change-Id: I77978d593aca046068f9209272d82e1675ba17c2 2022-10-22 GDB Administrator Automatic date update in version.in 2022-10-21 Pedro Alves Improve Python Unwinders documentation - avoid "GDB proper" to refer to global locus, as object files and program spaces are also GDB proper. - gdb.register_unwinder does not accept locus=gdb. - "a unwinder" -> "an unwinder" Approved-by: Eli Zaretskii Change-Id: I98c1b1000e1063815238e945ca71ec6f37b5702e 2022-10-21 Simon Marchi gdb: make inherit_abstract_dies use vector iterators Small cleanup to use std::vector iterators rather than raw pointers. Approved-By: Tom Tromey Change-Id: I8d50dbb3f2d8dad7ff94066a578d523f1f31b590 2022-10-21 Simon Marchi gdb: check for empty offsets vector in inherit_abstract_dies When building GDB with clang and --enable-ubsan, I get: UNRESOLVED: gdb.dwarf2/frame-inlined-in-outer-frame.exp: starti prompt The cause being: $ ./gdb --data-directory=data-directory -nx -q -readnow testsuite/outputs/gdb.dwarf2/frame-inlined-in-outer-frame/frame-inlined-in-outer-frame Reading symbols from testsuite/outputs/gdb.dwarf2/frame-inlined-in-outer-frame/frame-inlined-in-outer-frame... Expanding full symbols from testsuite/outputs/gdb.dwarf2/frame-inlined-in-outer-frame/frame-inlined-in-outer-frame... /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:11954:47: runtime error: applying non-zero offset 8 to null pointer I found this to happen with ld-linux on at least Arch Linux and Ubuntu 22.04: $ ./gdb --data-directory=data-directory -nx -q -readnow -iex "set debuginfod enabled on" /lib64/ld-linux-x86-64.so.2 Reading symbols from /lib64/ld-linux-x86-64.so.2... Reading symbols from /home/simark/.cache/debuginfod_client/22bd7a2c03d8cfc05ef7092bfae5932223189bc1/debuginfo... Expanding full symbols from /home/simark/.cache/debuginfod_client/22bd7a2c03d8cfc05ef7092bfae5932223189bc1/debuginfo... /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:11954:47: runtime error: applying non-zero offset 8 to null pointer The problem happens when doing this: sect_offset *offsetp = offsets.data () + 1 When `offsets` is an empty vector, `offsets.data ()` returns nullptr. Fix it by wrapping that in a `!offsets.empty ()` check. Change-Id: I6d29ba2fe80ba4308f68effd9c57d4ee8d67c29f Approved-By: Tom Tromey 2022-10-21 Fangrui Song readelf: support zstd compressed debug sections [PR 29640] 2022-10-21 Tom Tromey Fix incorrect .gdb_index with new DWARF scanner PR symtab/29694 points out a regression caused by the new DWARF scanner when the cc-with-gdb-index target board is used. What happens here is that an older version of gdb will make an index describing the "A" type as: [737] A: 1 [global, type] whereas the new gdb says: [1008] A: 0 [global, type] Here the old one is correct because the A in CU 0 is just a declaration without a size: <1><45>: Abbrev Number: 10 (DW_TAG_structure_type) <46> DW_AT_name : A <48> DW_AT_declaration : 1 <48> DW_AT_sibling : <0x6d> This patch fixes the problem by introducing the idea of a "type declaration". I think gdb still needs to recurse into these types, searching for methods, but by marking the type itself as a declaration, gdb can skip this type during lookups and when writing the index. Regression tested on x86-64 using the cc-with-gdb-index board. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29694 2022-10-21 Tom Tromey Fix crash in value_print_array_elements A user noticed that gdb would crash when printing a packed array after doing "set lang c". Packed arrays don't exist in C, but it's occasionally useful to print things in C mode when working in a non-C language -- this lets you see under the hood a little bit. The bug here is that generic value printing does not handle packed arrays at all. This patch fixes the bug by introducing a new function to extract a value from a bit offset and width. The new function includes a hack to avoid problems with some existing test cases when using -fgnat-encodings=all. Cleaning up this code looked difficult, and since "all" is effectively deprecated, I thought it made sense to simply work around the problems. 2022-10-21 Tom Tromey Fix bug in Ada packed array handling A user found a bug where an array of packed arrays was printed incorrectly. The bug here is that the packed array has a bit stride, but the outer array does not -- and should not. However, update_static_array_size does not distinguish between an array of packed arrays and a multi-dimensional packed array, and for the latter, only the innermost array will end up with a stride. This patch fixes the problem by adding a flag to indicate whether a given array type is a constituent of a multi-dimensional array. 2022-10-21 Simon Marchi gdb: declare variables on first use in inherit_abstract_dies Move variable declarations to where they are first use, plus some random style fixes. Change-Id: Idf40d60f9034996fa6a234165cd989a721eb4148 2022-10-21 Nick Clifton Add a -w option to the linker to suppress warning and error messages. PR 29654 * ld.h (struct ld_config_type): Add no_warnings field. * ldlex.h (enum option_values): Add OPTION_NO_WARNINGS. * lexsup.c (ld_options): Add --no-warnings. (parse_args): Add support for -w and --no-warnings. * ldmisc.c (vfinfo): Return early if the message is a warning and -w has been enabled. * ld.texi (options): Document new command line option. * NEWS: Mention the new feature. Add a note to the binutils/NEWS file about DCO signed contributions. 2022-10-21 Bruno Larsen gdb/reverse: Fix stepping over recursive functions Currently, when using GDB to do reverse debugging, if we try to use the command "reverse next" to skip a recursive function, instead of skipping all of the recursive calls and stopping in the previous line, we stop at the second to last recursive call, and need to manually step backwards until we leave the first call. This is well documented in PR gdb/16678. This bug happens because when GDB notices that a reverse step has entered into a function, GDB will add a step_resume_breakpoint at the start of the function, then single step out of the prologue once that breakpoint is hit. The problem was happening because GDB wouldn't give that step_resume_breakpoint a frame-id, so the first time the breakpoint was hit, the inferior would be stopped. This is fixed by giving the current frame-id to the breakpoint. This commit also changes gdb.reverse/step-reverse.c to contain a recursive function and attempt to both, skip it altogether, and to skip the second call from inside the first call, as this setup broke a previous version of the patch. 2022-10-21 Bruno Larsen Change calculation of frame_id by amd64 epilogue unwinder When GDB is stopped at a ret instruction and no debug information is available for unwinding, GDB defaults to the amd64 epilogue unwinder, to be able to generate a decent backtrace. However, when calculating the frame id, the epilogue unwinder generates information as if the return instruction was the whole frame. This was an issue especially when attempting to reverse debug, as GDB would place a step_resume_breakpoint from the epilogue of a function if we were to attempt to skip that function, and this breakpoint should ideally have the current function's frame_id to avoid other problems such as PR record/16678. This commit changes the frame_id calculation for the amd64 epilogue, so that it is always the same as the dwarf2 unwinder's frame_id. It also adds a test to confirm that the frame_id will be the same, regardless of using the epilogue unwinder or not, thanks to Andrew Burgess. Co-Authored-By: Andrew Burgess 2022-10-21 Nick Clifton Updated Hungarian translation for the gprof sub-directory. * po/hu.po: Updated Hungarian translation. 2022-10-21 Maciej W. Rozycki GDB/Python: Make `None' stand for `unlimited' in setting integer parameters Similarly to booleans and following the fix for PR python/29217 make `gdb.parameter' accept `None' for `unlimited' with parameters of the PARAM_UINTEGER, PARAM_INTEGER, and PARAM_ZUINTEGER_UNLIMITED types, as `None' is already returned by parameters of the two former types, so one might expect to be able to feed it back. It also makes it possible to avoid the need to know what the internal integer representation is for the special setting of `unlimited'. Expand the testsuite accordingly. Approved-By: Simon Marchi 2022-10-21 Maciej W. Rozycki GDB/testsuite: Expand Python integer parameter coverage across all types Also verify PARAM_UINTEGER, PARAM_INTEGER, and PARAM_ZINTEGER parameter types, in addition to PARAM_ZUINTEGER and PARAM_ZUINTEGER_UNLIMITED already covered, and verify a choice of existing GDB parameters. Add verification for reading parameters via `.value' in addition to `gdb.parameter('')' as this covers different code paths. Approved-By: Simon Marchi 2022-10-21 Maciej W. Rozycki GDB/Guile: Don't assert that an integer value is boolean Do not assert that a value intended for an integer parameter, of either the PARAM_UINTEGER or the PARAM_ZUINTEGER_UNLIMITED type, is boolean, causing error messages such as: ERROR: In procedure make-parameter: ERROR: In procedure gdbscm_make_parameter: Wrong type argument in position 15 (expecting integer or #:unlimited): 3 Error while executing Scheme code. when initialization with a number is attempted. Instead assert that it is integer. Keep matching `#:unlimited' keyword as an alternative. Add suitable test cases. Approved-By: Simon Marchi 2022-10-21 Tom de Vries [gdb/testsuite] Silence compilation fail in gdb.base/rtld-step.exp With gcc 7.5.0 and test-case gdb.base/rtld-step.exp, I run into: ... gdb compile failed, gcc: error: unrecognized command line option \ '-static-pie'; did you mean '-static'? ... Silence this by checking in the test-case that -static-pie is supported, and emitting instead: ... UNTESTED: gdb.base/rtld-step.exp: \ failed to compile (-static-pie not supported or static libc missing) ... Tested on x86_64-linux, with: - gcc 7.5.0: UNTESTED - gcc 12.2.1 with static glibc not installed: UNTESTED - gcc 12.2.1 with static glibc installed: PASS 2022-10-21 Cui,Lili Support Intel AMX-FP16 gas/ * NEWS: Add support for Intel AMX-FP16 instruction. * config/tc-i386.c: Add amx_fp16. * doc/c-i386.texi: Document .amx_fp16. * testsuite/gas/i386/i386.exp: Add AMX-FP16 tests. * testsuite/gas/i386/x86-64-amx-fp16-intel.d: New test. * testsuite/gas/i386/x86-64-amx-fp16.d: Likewise. * testsuite/gas/i386/x86-64-amx-fp16.s: Likewise. * testsuite/gas/i386/x86-64-amx-fp16-bad.d: Likewise. * testsuite/gas/i386/x86-64-amx-fp16-bad.s: Likewise. opcodes/ * i386-dis.c (MOD_VEX_0F385C_X86_64_P_3_W_0): New. (VEX_LEN_0F385C_X86_64_P_3_W_0_M_0): Likewise. (VEX_W_0F385C_X86_64_P_3): Likewise. (prefix_table): Add VEX_W_0F385C_X86_64_P_3. (vex_len_table): Add VEX_LEN_0F385C_X86_64_P_3_W_0_M_0. (vex_w_table): Add VEX_W_0F385C_X86_64_P_3. (mod_table): Add MOD_VEX_0F385C_X86_64_P_3_W_0. * i386-gen.c (cpu_flag_init): Add AMX-FP16_FLAGS. (CPU_ANY_AMX_TILE_FLAGS): Add CpuAMX_FP16. (cpu_flags): Add CpuAMX-FP16. * i386-opc.h (enum): Add CpuAMX-FP16. (i386_cpu_flags): Add cpuamx_fp16. * i386-opc.tbl: Add Intel AMX-FP16 instruction. * i386-init.h: Regenerate. * i386-tbl.h: Likewise. 2022-10-21 Tsukasa OI sim: Remove unused CXXFLAGS substitution Not only that sim/configure.ac does not AC_SUBST CXXFLAGS, unless we need C++ compiler like CXX, substitution @CXXFLAGS@ is useless. Because of this, this commit removes this substitution. 2022-10-21 GDB Administrator Automatic date update in version.in 2022-10-20 H.J. Lu x86: Check VEX/EVEX encoding before checking vector operands Since commit 837e225ba1992f9745e5bbbd5e8443243a7f475f Author: Jan Beulich Date: Thu Oct 20 10:01:12 2022 +0200 x86: re-work AVX-VNNI support moved AVX-VNNI after AVX512-VNNI, vector Disp8 is applied even when VEX encoding is selected. Check VEX/EVEX encoding before checking vector operands to avoid vector Disp8 with VEX encoding. PR gas/29708 * config/tc-i386.c (match_template): Check VEX/EVEX encoding before checking vector operands. * testsuite/gas/i386/avx-vnni.d: Updated. * testsuite/gas/i386/x86-64-avx-vnni.d: Likewise. * testsuite/gas/i386/avx-vnni.s: Add a Disp32 test. * testsuite/gas/i386/x86-64-avx-vnni.s: Likewise. 2022-10-20 Andrew Burgess gdb/python: break more dependencies between gdbpy_initialize_* functions In a later commit in this series I will propose removing all of the explicit gdbpy_initialize_* calls from python.c and replace these calls with a more generic mechanism. One of the side effects of this generic mechanism is that the order in which the various Python sub-systems within GDB are initialized is no longer guaranteed. On the whole I don't think this matters, most of the sub-systems are independent of each other, though testing did reveal a few places where we did have dependencies, though I don't think those dependencies were explicitly documented in comment anywhere. This commit is similar to the previous one, and fixes the second dependency issue that I found. In this case the finish_breakpoint_object_type uses the breakpoint_object_type as its tp_base, this means that breakpoint_object_type must have been initialized with a call to PyType_Ready before finish_breakpoint_object_type can be initialized. Previously we depended on the ordering of calls to gdbpy_initialize_breakpoints and gdbpy_initialize_finishbreakpoints in python.c. After this commit a new function gdbpy_breakpoint_init_breakpoint_type exists, this function ensures that breakpoint_object_type has been initialized, and can be called from any gdbpy_initialize_* function. I feel that this change makes the dependency explicit, which I think is a good thing. There should be no user visible changes after this commit. 2022-10-20 Andrew Burgess gdb/python: break dependencies between gdbpy_initialize_* functions In a later commit in this series I will propose removing all of the explicit gdbpy_initialize_* calls from python.c and replace these calls with a more generic mechanism. One of the side effects of this generic mechanism is that the order in which the various Python sub-systems within GDB are initialized is no longer guaranteed. On the whole I don't think this matters, most of the sub-systems are independent of each other, though testing did reveal a few places where we did have dependencies, though I don't think those dependencies were explicitly documented in a comment anywhere. This commit removes the first dependency issue, with this and the next commit, all of the implicit inter-sub-system dependencies will be replaced by explicit dependencies, which will allow me to, I think, clean up how the sub-systems are initialized. The dependency is around the py_insn_type. This type is setup in gdbpy_initialize_instruction and used in gdbpy_initialize_record. Rather than depend on the calls to these two functions being in a particular order, in this commit I propose adding a new function py_insn_get_insn_type. This function will take care of setting up the py_insn_type type and calling PyType_Ready. This helper function can be called from gdbpy_initialize_record and gdbpy_initialize_instruction, and the py_insn_type will be initialized just once. To me this is better, the dependency is now really obvious, but also, we no longer care in which order gdbpy_initialize_record and gdbpy_initialize_instruction are called. There should be no user visible changes after this commit. 2022-10-20 Andrew Burgess gdb: some int to bool conversion in breakpoint.c Some int to bool conversion in breakpoint.c. I've only updated the function signatures of static functions, but I've updated some function local variables throughout the file. There should be no user visible changes after this commit. Approved-By: Simon Marchi 2022-10-20 Andrew Burgess gdb: make use of scoped_restore in unduplicated_should_be_inserted I noticed that we could make use of a scoped_restore in the function unduplicated_should_be_inserted. I've also converted the function return type from int to bool. This change shouldn't make any difference, as I don't think anything within should_be_inserted could throw an exception, but the change doesn't hurt, and will help keep us safe if anything ever changes in the future. Approved-By: Simon Marchi 2022-10-20 Andrew Burgess gdb: used scoped_restore_frame in update_watchpoint I was doing some int to bool cleanup in update_watchpoint, and I noticed a manual version of scoped_restore_selected_frame. As always when these things are done manually, there is the chance that, in an error case, we might leave the wrong frame selected. This commit updates things to use scoped_restore_selected_frame, and also converts a local variable from int to bool. The only user visible change after this commit is in the case where update_watchpoint throws an error - we should now correctly restore the previously selected frame. Otherwise, this commit should be invisible to the user. Approved-By: Simon Marchi 2022-10-20 Andrew Burgess gdb: make some bp_location arguments const in breakpoint.c I spotted a few places where I could make some 'bp_location *' arguments constant in breakpoint.c. There should be no user visible changes after this commit. Approved-By: Simon Marchi 2022-10-20 Дилян Палаузов Reapply "Don't build readline/libreadline.a, when --with-system-readline is supplied" Commit 228cf97dd3c8 ("Merge configure.ac from gcc project") undid the change originally done in commit 69961a84c9b ("Don't build readline/libreadline.a, when --with-system-readline is supplied"). Re-apply it. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=18632 2022-10-20 Jan Beulich x86: re-work AVX-VNNI support By putting the templates after their AVX512 counterparts, the AVX512 flavors will be picked by default. That way the need to always use {vex} ceases to exist once respective CPU features (AVX512-VNNI or AVX512VL as a whole) have been disabled. This way the need for the PseudoVexPrefix attribute also disappears. 2022-10-20 Tom de Vries [gdb/testsuite] Fix gdb.debuginfod/fetch_src_and_symbols.exp with check-read1 With test-case gdb.debuginfod/fetch_src_and_symbols.exp and check-read1, I run into: ... (gdb) FAIL: gdb.debuginfod/fetch_src_and_symbols.exp: local_url: \ file fetch_src_and_symbols (got interactive prompt) ... The problem is that this output: ... Enable debuginfod for this session? (y or [n]) y^M ... is matched using regexp "Enable debuginfod?.*" with matches only the first two words of the output, after which an implicit clause in gdb_test_multiple triggers on the second part containing the interactive prompt. Fix this by included the interactive prompt in the regexp. Tested on x86_64-linux. 2022-10-20 Tom de Vries [gdb/testsuite] Fix gdb.mi/mi-disassemble.exp with check-read1 With test-case gdb.mi/mi-disassemble.exp and check-read1 I run into: ... FAIL: gdb.mi/mi-disassemble.exp: disassemble /b main FAIL: gdb.mi/mi-disassemble.exp: get valueof "*((unsigned char *) 0x400549)" ... The problem for both FAILs is that the output is parsed using gdb_test_multiple, which has implicit clauses using $gdb_prompt, which can match before the explicit clauses using $mi_gdb_prompt. Fix this by passing -prompt "$mi_gdb_prompt$" to gdb_test_multiple. Tested on x86-64-linux. 2022-10-20 Alan Modra Re: aarch64-pe support for LD, GAS and BFD Fix dependencies for eaarch64pe.c. Generated files aren't handled fully automatically. 2022-10-20 Mark Harmstone ld: Add minimal pdb generation ld: Add --pdb option Second patch incorporates fixes for endian and UB issues in calc_hash, as per https://sourceware.org/pipermail/binutils/2022-October/123514.html. 2022-10-20 Kevin Buettner Test stepping within a runtime loader / dynamic linker See the remarks in rtld-step.exp for a description of what this test is about. This test case has been tested using gcc on the following x86-64 Linux distributions/releases: Fedora 28 Fedora 32 Fedora 33 Fedora 34 Fedora 35 Fedora 36 Fedora 37 rawhide (f38) RHEL 9.1 Ubuntu 22.04.1 LTS It's also been tested (and found to be working) with RUNTESTFLAGS="CC_FOR_TARGET=clang" on all of the above expect for Fedora 28. The (old) version of clang available on F28 did not accept the -static-pie option. I also tried to make this test work on FreeBSD 13.1. While I think I made significant progress, I was ultimately stymied by this message which occurs when attempting to run the main program which has been set to use the fake/pretend RTLD as the ELF interpreter: ELF interpreter /path/to/rtld-step-rtld not found, error 22 I have left one of the flags (-static) in place which I believe to be needed for FreeBSD (though since I never got it to work, I don't know for sure.) I've also left some declarations needed for FreeBSD in rtld-step-rtld.c. They're currently disabled via a #if 0; you'll need to enable them if you want to try to make it work on FreeBSD. 2022-10-20 Kevin Buettner Allow debugging of runtime loader / dynamic linker At present, GDB does not allow for the debugging of the runtime loader and/or dynamic linker. Much of the time, this makes sense. An application programmer doesn't normally want to see symbol resolution code when stepping into a function that hasn't been resolved yet. But someone who wishes to debug the runtime loader / dynamic linker might place a breakpoint in that code and then wish to debug it as normal. At the moment, this is not possible. Attempting to step will cause GDB to internally step (and not stop) until code unrelated to the dynamic linker is reached. This commit makes a minor change to infrun.c which allows the dynamic loader / linker to be debugged in the case where a step, next, etc. is initiated from within that code. While developing this fix, I tried some approaches which weren't quite right. The GDB testusite definitely contains tests which FAIL when it's done incorrectly. (At one point, I saw 17 regressions!) This commit has been tested on x86-64 linux with no regressions. 2022-10-20 Tsukasa OI binutils: Remove unused substitution PROGRAM Unlike other substitution, this substitution of @PROGRAM@ was done in binutils/Makefile and it was intended for binutils/cxxfilt.man. @PROGRAM@ in binutils/cxxfilt.man is removed in the commit 0285c67df190 ("Automate generate on man pages") in 2001 and @PROGRAM@ is ineffective since then. Because PROGRAM substitution does nothing, removing this manual substitution should be completely safe. binutils/ChangeLog: * doc/local.mk: Remove unused substitution PROGRAM. * Makefile.in: Regenerate. 2022-10-20 GDB Administrator Automatic date update in version.in 2022-10-20 Alan Modra Obsolete beos * config.bfd: Obsolete *-*-beos*. Simplify x86 beos match. Regen ld/po/BLD-POTFILES.in 2022-10-19 Tom de Vries [gdb] Fix assert in handle_jit_event With the cc-with-tweaks.sh patch submitted here ( https://sourceware.org/pipermail/gdb-patches/2022-October/192586.html ) we run with: ... $ export STRIP_ARGS_STRIP_DEBUG=--strip-all $ make check RUNTESTFLAGS="gdb.base/jit-reader.exp \ --target_board cc-with-gnu-debuglink" ... into the following assert: ... (gdb) run ^M Starting program: jit-reader ^M gdb/jit.c:1247: internal-error: jit_event_handler: \ Assertion `jiter->jiter_data != nullptr' failed.^M ... Fix this by handling the jit_bp_sym.objfile->separate_debug_objfile_backlink != nullptr case in handle_jit_event. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29277 2022-10-19 Pedro Alves internal_error: remove need to pass __FILE__/__LINE__ Currently, every internal_error call must be passed __FILE__/__LINE__ explicitly, like: internal_error (__FILE__, __LINE__, "foo %d", var); The need to pass in explicit __FILE__/__LINE__ is there probably because the function predates widespread and portable variadic macros availability. We can use variadic macros nowadays, and in fact, we already use them in several places, including the related gdb_assert_not_reached. So this patch renames the internal_error function to something else, and then reimplements internal_error as a variadic macro that expands __FILE__/__LINE__ itself. The result is that we now should call internal_error like so: internal_error ("foo %d", var); Likewise for internal_warning. The patch adjusts all calls sites. 99% of the adjustments were done with a perl/sed script. The non-mechanical changes are in gdbsupport/errors.h, gdbsupport/gdb_assert.h, and gdb/gdbarch.py. Approved-By: Simon Marchi Change-Id: Ia6f372c11550ca876829e8fd85048f4502bdcf06 2022-10-19 Nick Clifton Fix an illegal memory access when parsing an ELF file containing corrupt symbol version information. PR 29699 * elf.c (_bfd_elf_slurp_version_tables): Fail if the sh_info field of the section header is zero. 2022-10-19 Andrew Burgess sim/iq2000: silence pointer-sign warnings When building the iq2000 simulator I see a few warnings like this: /tmp/build/sim/../../src/sim/iq2000/iq2000.c: In function ‘fetch_str’: /tmp/build/sim/../../src/sim/iq2000/iq2000.c:50:54: error: pointer targets in passing argument 3 of ‘sim_read’ differ in signedness [-Werror=pointer-sign] 50 | sim_read (CPU_STATE (current_cpu), CPU2DATA(addr), buf, nr); | ^~~ | | | char * I've silenced these warnings by casting buf to 'unsigned char *'. With this change I now see no warnings when compiling iq2000.c, so I've removed the line from Makefile.in that disables -Werror. Makefile.in was also disabling -Werror when compiling mloop.c, however, I'm not seeing any warnings when compiling that file, so I've removed the -Werror disable in that case too. 2022-10-19 Andrew Burgess sim/erc32: avoid dereferencing type-punned pointer warnings When building the erc32 simulator I get a few warnings like this: /tmp/build/sim/../../src/sim/erc32/exec.c:1377:21: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] 1377 | sregs->fs[rd] = *((float32 *) & ddata[0]); | ~^~~~~~~~~~~~~~~~~~~~~~~ The type of '& ddata[0]' will be 'uint32_t *', which is what triggers the warning. This commit makes use of memcpy when performing the type-punning, which resolves the above warnings. With this change, I now see no warnings when compiling exec.c, which means that the line in Makefile.in that disables -Werror can be removed. There should be no change in behaviour after this commit. 2022-10-19 Andrew Burgess sim/ppc: mark device_error function as ATTRIBUTE_NORETURN The device_error function always ends up calling the error function, which is itself marked as ATTRIBUTE_NORETURN, so it makes sense that device_error should also be marked ATTRIBUTE_NORETURN. Doing this resolves a few warnings from hw_ide.c about possibly uninitialized variables - the variables are only uninitialized after passing through a call to device_error, which obviously means the variables are never really used uninitialized, the simulation will terminate with the device_error call. 2022-10-19 Andrew Burgess sim/ppc: fix warnings related to printf format strings This commit is a follow on to: commit 182421c9d2eea8c4877d983a2124e591f0aca710 Date: Tue Oct 11 15:02:08 2022 +0100 sim/ppc: fixes for arguments to printf style functions where commit 182421c9d2ee addressed issues with printf format arguments that were causing the compiler to give an error, this commit addresses issues that caused the compiler to emit a warning. This commit is mostly either changing the format string to match the argument, or in some cases, excess, unused arguments are removed. 2022-10-19 Andrew Burgess sim/cgen: mask uninitialized variable warning in cgen-run.c I see an uninitialized variable warning (with gcc 9.3.1) from cgen-run.c, like this: /tmp/build/sim/../../src/sim/cris/../common/cgen-run.c: In function ‘sim_resume’: /tmp/build/sim/../../src/sim/cris/../common/cgen-run.c:259:5: warning: ‘engine_fns$’ may be used uninitialized in this function [-Wmaybe-uninitialized] 259 | (* engine_fns[next_cpu_nr]) (cpu); | ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /tmp/build/sim/../../src/sim/cris/../common/cgen-run.c:232:14: note: ‘engine_fns$’ was declared here 232 | ENGINE_FN *engine_fns[MAX_NR_PROCESSORS]; | ^~~~~~~~~~ This is a false positive - we over allocate engine_fn, and then only initialize the nr_cpus entries which we will later go on to use. However, we can easily silence this warning by initializing the unused entries in engine_fns to NULL, this might also help if anyone ever looks at engine_fns in a debugger, it should now be obvious which entries are in use, and which are not. With this change the warning is gone. There should be no change in behaviour with this commit. 2022-10-19 Alan Modra Fix addr2line test for ppc64 elfv1 and mingw * testsuite/binutils-all/addr2line.exp: Tidy. For powerpc64 arrange to pass --synthetic to nm, and extract .main and .fn symbol address for addr2line test. Handle default executable extension on cygwin/mingw compilers. 2022-10-19 Nick Clifton Update MAINTAINERS file with details about accepting DCO signed contributions. * MAINTAINERS: Add section on patches, copyright and DCO. 2022-10-19 Andrew Burgess gdb/testsuite: avoid temporary file in gdb/testsuite (unittest.exp) I spotted that the gdb.gdb/unittest.exp script causes a temporary file inserters_extractors-2.txt to be created in build/gdb/testsuite/ instead of in build/gdb/testsuite/output/gdb.gdb/unittest/. This is because some of the 'maint selftest' tests create temporary files in GDB's current directory, specifically, the two source files: gdb/unittests/basic_string_view/inserters/wchar_t/2.cc gdb/unittests/basic_string_view/inserters/char/2.cc both create a temporary file called inserters_extractors-2.txt, though we only run the second of these as part of GDB's selftests. I initially proposed just using GDB's 'cd' command in unittest.exp to switch to the test output directory before running the selftests, however, Pedro pointed out that there was a risk here that, if GDB crashed during shutdown, the generated core file would be left in the test output directory rather than in the testsuite directory. As a result, our clever core file spotting logic would fail to spot the core file and alert the user. Instead, I propose this slightly more involved solution. I've added a new with_gdb_cwd directory proc, used like this: with_gdb_cwd $directory { # Tests here... } The new proc temporarily switches to $directory and then runs the tests within the block. After running the tests the previous current working directory is restored. Additionally, after switching back to the previous cwd, we check that GDB is still responsive. This means that if GDB crashed immediately prior to restoring the previous directory, and left the core file in the wrong place, then the responsiveness check will fail, and a FAIL will be emitted, this should be enough to alert the user that something has gone wrong. With this commit in place the unittest.exp script now leaves its temporary file in the test output directory. 2022-10-19 Andrew Burgess gdb/testsuite: avoid creating files in gdb/testsuite directory I spotted that the test gdb.dwarf2/dw2-using-debug-str.exp was creating an output file called debug_str_section in the root build/gdb/testsuite directory instead of using the build/gdb/testsuite/output/gdb.dwarf2/dw2-using-debug-str/ directory. This appears to be caused by a missing '$' character. We setup a variable debug_str_section which contains a path within the output directory, but then when we build the objcopy command we use 'debug_str_section' without a '$' prefix, as a result, we create the debug_str_section file. This commit adds the missing '$', the file is now created in the output directory. 2022-10-19 Andrew Burgess bfd: fix undefined references to aarch64_pe_le_vec After commit: commit c60b3806799abf1d7f6cf5108a1b0e733a950b13 Date: Wed Oct 19 10:57:12 2022 +0200 aarch64-pe support for LD, GAS and BFD It appears that bfd/Makefile.in and bfd/configure were not regenerated correctly. The differences in the configure file are only whitespace, but in Makefile.in a critical reference to pe-aarch64.lo was missing. 2022-10-19 Jedidiah Thompson Jedidiah Thompson Zac Walker aarch64-pe support for LD, GAS and BFD Allows aarch64-pe to be targeted natively, not having to use objcopy to convert it from ELF to PE. Based on initial work by Jedidiah Thompson 2022-10-19 rupesh potharla Binutils: Adding new testcase for addr2line. * binutils/testsuite/config/default.exp: Set ADDR2LINE and ADDR2LINEFLAGS. * binutils/testsuite/binutils-all/addr2line.exp: New file. 2022-10-19 Tom de Vries [gdb/testsuite] Fix ERROR in gdb.python/py-breakpoint.exp With test-case gdb.python/py-breakpoint.exp I run into: ... (gdb) ERROR: tcl error sourcing gdb.python/py-breakpoint.exp. ERROR: can't read "skip_hw_watchpoint_tests_p": no such variable while executing "if {$skip_hw_watchpoint_tests_p} { gdb_test_no_output "set can-use-hw-watchpoints 0" "" }" ... Fix this by adding the missing "global skip_hw_watchpoint_tests_p" in two procs. Tested on x86_64-linux. 2022-10-19 Andreas Krebbel IBM zSystems: Issue error for *DBL relocs on misaligned symbols Relocs like PC32DBL require a right shift of the symbol value. There is no situation where dropping symbol value bits with the right shift is a good thing. Hence we now issue an error to detect such problems. 2022-10-19 Simon Marchi gdb: check for groups with duplicate names in reggroups:add In the downstream ROCm GDB port, we would create multiple register groups with duplicate names. While it did not really hurt, it certainly wasn't the intent. And I don't think it ever makes sense to do so. To catch these, change the assert in reggroups::add to check for duplicate names. It's no longer necessary to check for duplicate reggroup pointers, because adding the same group twice would be caught by the duplicate name check. Change-Id: Id216a58acf91f1b314d3cba2d02de73656f8851d Approved-By: Tom Tromey 2022-10-19 GDB Administrator Automatic date update in version.in 2022-10-18 H.J. Lu x86: Disable AVX-VNNI when disabling AVX2 Since AVX-VNNI requires AVX2, disable AVX-VNNI when disabling AVX2. * i386-gen.c (cpu_flag_init): Add CpuAVX_VNNI to CPU_ANY_AVX2_FLAGS. * i386-init.h: Regenerate. 2022-10-18 Tom Tromey Remove dead code from py-finishbreakpoint.c PR python/16324 points out that comparing a frame id to null_frame_id can never succeed, and proposes simply removing the dead code. That is what this patch does. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=16324 2022-10-18 Carl Love Update tests to use skip_hw_watchpoint_tests to test for HW watchpoint support. The hardware watchpoint check has been updated in a couple of recent patches. This patch updates the hardware watchpoint test in the remaining gdb tests. The issue is the PowerPC processors support hardware watchpoints with the exception of Power 9. The hardware watchpoint support is disabled on Power 9. The test skip_hw_watchpoint_tests must be used to correctly determine if the PowerPC processor supports hardware watchpoints. This patch fixes 6 test failures in test gdb.threads/watchpoint-fork.exp. Test gdb.base/watch-vfork.exp runs with can-use-hw-watchpoints set to true and false. When the test is run with can-use-hw-watchpoints set to true, gdb just falls back to using software watchpoints. The patch reduces the number of expected passes by 2 since because it now only runs once with can-use-hw-watchpoints set to false. Test gdb.mi/mi-watch.exp runs the test with argument hw and sw. If the argument is hw and hardware watchpoints are not supported the test exits. The number of expected passes is cut in half with the patch as it now only runs the test using software breakpoints. Previously the pass to use hardware watchpoints was not skipped and the test actually ran using software watchpoints. The following tests run the same with and without the patch. The tests are supposed to execute the gdb command "set can-use-hw-watchpoints 0" if the processor does not support hardware bwatchpoints. However the command was not being executed and gdb was falling back to using software watchpoints since the Power 9 watchpoint resource check fails. With the patch, the tests now execute the command and the test runs using software watchpoints as it did previously. The tests are: gdb.base/commands.exp gdb.base/cond-eval-mode.exp gdb.base/display.exp gdb.base/gdb11531.exp gdb.base/recurse.exp gdb.base/value-double-free.exp gdb.base/watch-bitfields.exp gdb.base/watch-cond-infcall.exp gdb.base/watch-cond.exp gdb.base/watchpoint-solib.exp gdb.base/watchpoints.exp The following two tests are not supported on the Power 9 system used to test the changes. The patch does not change the tests results for these tests: gdb.python/py-breakpoint.exp gdb.mi/mi-watch-nonstop.exp 2022-10-18 Tom de Vries [gdb/testsuite] Handle header files with local-remote-host.exp With test-case gdb.base/included.exp and host board local-remote-host.exp with tentative fix for PR29697 I run into: ... included.c:18:10: fatal error: included.h: No such file or directory #include "included.h" ^~~~~~~~~~~~ compilation terminated. ... Fix this by adding the missing gdb_remote_download calls. Likewise in a few other test-cases. Tested on x86_64-linux. 2022-10-18 Tom de Vries [gdb/testsuite] Fix gdb.server/no-thread-db.exp with local-remote-host.exp With test-case gdb.server/no-thread-db.exp and host board local-remote-host.exp with a tentative fix for PR29697 I run into: ... (gdb) print foo^M Cannot find thread-local storage for Thread 29613.29613, executable file \ $HOME/no-thread-db:^M Remote target failed to process qGetTLSAddr request^M (gdb) FAIL: gdb.server/no-thread-db.exp: print foo ... The regexp in the test-case expects the full $binfile pathname, but we have instead $HOME/no-thread-db. Fix this by making the regexp less strict. Tested on x86_64-linux. 2022-10-18 Tom de Vries [gdb/testsuite] Fix gdb.base/return-nodebug.exp with local-remote-host.exp With host board local-remote-host.exp and test-case gdb.base/return-nodebug.exp, I run into: ... Executing on host: gcc -fno-stack-protector -fdiagnostics-color=never \ -DTYPE=signed\ char -c -g -o return-nodebug-signed-char0.o \ /home/vries/gdb_versions/devel/src/gdb/testsuite/gdb.base/return-nodebug.c \ (timeout = 300) builtin_spawn [open ...]^M gcc: error: char: No such file or directory ... Avoid the quoting problem by not using spaces in the define. Tested on x86_64-linux. 2022-10-18 Tom de Vries [gdb/testsuite] Fix gdb.server/file-transfer.exp with local-remote-host.exp When running test-case gdb.server/file-transfer.exp with host board local-remote-host.exp, I get: ... Executing on host: cmp -s $outputs/gdb.server/file-transfer/file-transfer \ down-server (timeout = 300) builtin_spawn [open ...]^M XYZ2ZYX FAIL: gdb.server/file-transfer.exp: compare intermediate binary file ... The remote host and remote target cases are handled here together here in proc test_file_transfer: ... if {![is_remote host] && ![is_remote target]} { set up_server [standard_output_file $up_server] set down_server [standard_output_file $down_server] } ... Fix this by handling them separately. Tested on x86_64-linux. 2022-10-18 Tom de Vries [gdb/testsuite] Update boards/README Update gdb/testsuite/boards/README to reflect recent commit c4c8c27263d ("[gdb/testsuite] Fix host board local-remote-host-notty.exp timeouts"), which means the board now uses a pseudo-tty, but with editing disabled. 2022-10-18 Markus Metzger gdb, solib-svr4: support namespaces in DSO iteration When looking up names, GDB needs to stay within one linker namespace to find the correct instance in case the same name is provided in more than one namespace. Modify svr4_iterate_over_objfiles_in_search_order() to stay within the namespace of the current_objfile argument. If no current_objfile is provided (i.e. it is nullptr), iterate over objfiles in the initial namespace. For objfiles that do not have a corresponding so_list to provide the namespace, assume that the objfile was loaded into the initial namespace. This would cover the main executable objfile (which is indeed loaded into the initial namespace) as well as manually added symbol files. Expected fails: - gdb.base/non-lazy-array-index.exp: the expression parser may lookup global symbols, which may result in xfers to read auxv for determining the debug base as part of svr4_iterate_over_objfiles_in_search_order(). - gdb.server/non-lazy-array-index.exp: symbol lookup may access the target to read AUXV in order to determine the debug base for SVR4 linker namespaces. Known issues: - get_symbol_address() and get_msymbol_address() search objfiles for a 'better' match. This was introduced by 4b610737f02 Handle copy relocations to handle copy relocations but it now causes a wrong address to be read after symbol lookup actually cound the correct symbol. This can be seen, for example, with gdb.base/dlmopen.exp when compiled with clang. - gnu ifuncs are only looked up in the initial namespace. - lookup_minimal_symbol() and lookup_minimal_symbol_text() directly iterate over objfiles and are not aware of linker namespaces. 2022-10-18 Markus Metzger gdb: update gnu ifunc resolve Update elf_gnu_ifunc_resolve_by_cache() and elf_gnu_ifunc_resolve_by_got() to use gdbarch_iterate_over_objfiles_in_search_order() in order to restrict the objfile traversal to the initial namespace. In order to extend this to other namespaces, we'd need to provide context, e.g. via an objfile inside that namespace. 2022-10-18 Markus Metzger gdb, symtab: inline find_quick_global_symbol_language There is only one use of find_quick_global_symbol_language that calls it for the special symbol "main". Inline the function as it is probably not correct in the general case where we may have multiple instances of global symbols with the same name but different languages in different libraries in different linker namespaces. Further, change the objfiles iteration into a call to gdbarch_iterate_over_objfiles_in_search_order, which would only search the initial linker namespace, where we expect "main" to be located. 2022-10-18 Markus Metzger gdb, hppa: remove unused hppa_lookup_stub_minimal_symbol I stumbled over this while reviewing all objfiles traversals with regards to impact of linker namespaces. Recursive grep only finds two occurrences of hppa_lookup_stub_minimal_symbol: - the declaration in hppa-tdep.h. - the definition in hppa-tdep.c. There appear to be no calls to this function. Remove it. 2022-10-18 Markus Metzger gdb, cp: update add_symbol_overload_list_qualified Iterate over objfiles in search order using the objfile of the selected block as current_objfile so the iteration can stay inside the block's linker namespace. fixup! gdb, ada: update ada_lookup_simple_minsym remove get_selected_block() gdb, ada: update ada_lookup_simple_minsym Iterate over objfile in search order using the objfile of the context block as current_objfile so the iteration can stay inside the block's linker namespace. gdb, ada: collect standard exceptions in all objfiles When searching for standard exceptions for Ada, we lookup the minimal symbol of each exception. With linker namespaces there can be multiple instances in different namespaces. Collect them all. 2022-10-18 Markus Metzger gdb, python: use gdbarch_iterate_over_objfiles_in_search_order The implementation of gdb.lookup_objfile() iterates over all objfiles and compares their name or build id to the user-provided search string. This will cause problems when supporting linker namespaces as the first objfile in any namespace will be found. Instead, use gdbarch_iterate_over_objfiles_in_search_order to only consider the namespace of gdb.current_objfile() for the search, which defaults to the initial namespace when gdb.current_objfile() is None. 2022-10-18 Markus Metzger gdb, compile: unlink objfile stored in module When cleaning up after a compile command, we iterate over all objfiles and unlink the first objfile with the same name as the one we compiled. Since we already store a pointer to that objfile in the module and use it to get the name we're comparing against, there's no reason to iterate, at all. We can simply use that objfile. This further avoids potential issues when an objfile with the same name is loaded into a different linker namespace. 2022-10-18 Markus Metzger gdb, gdbserver: extend RSP to support namespaces Introduce a new qXfer:libraries-svr4:read annex key/value pair lmid= to be used together with start and prev to provide the namespace of start and prev to gdbserver. Unknown key/value pairs are ignored by gdbserver so no new supports check is needed. Introduce a new library-list-svr4 library attribute lmid to provide the namespace of a library entry to GDB. This implementation uses the address of a namespace's r_debug object as namespace identifier. This should have incremented the minor version but since unknown XML attributes are ignored, anyway, and since changing the version results in a warning from GDB, the version is left at 1.0. 2022-10-18 Markus Metzger gdbserver: move main_lm handling into caller When listing SVR4 shared libraries, special care has to be taken about the first library in the default namespace as that refers to the main executable. The load map address of this main executable is provided in an attribute of the library-list-svr4 element. Move that code from where we enumerate libraries inside a single namespace to where we generate the rest of the library-list-svr4 element. This allows us to complete the library-list-svr4 element inside one function. There should be no functional change. 2022-10-18 Markus Metzger Lu, Hongjiu gdb, gdbserver: support dlmopen() In glibc, the r_debug structure contains (amongst others) the following fields: int r_version: Version number for this protocol. It should be greater than 0. If r_version is 2, struct r_debug is extended to struct r_debug_extended with one additional field: struct r_debug_extended *r_next; Link to the next r_debug_extended structure. Each r_debug_extended structure represents a different namespace. The first r_debug_extended structure is for the default namespace. 1. Change solib_svr4_r_map argument to take the debug base. 2. Add solib_svr4_r_next to find the link map in the next namespace from the r_next field. 3. Update svr4_current_sos_direct to get the link map in the next namespace from the r_next field. 4. Don't check shared libraries in other namespaces when updating shared libraries in a new namespace. 5. Update svr4_same to check the load offset in addition to the name 6. Update svr4_default_sos to also set l_addr_inferior 7. Change the flat solib_list into a per-namespace list using the namespace's r_debug address to identify the namespace. Add gdb.base/dlmopen.exp to test this. To remain backwards compatible with older gdbserver, we reserve the namespace zero for a flat list of solibs from all namespaces. Subsequent patches will extend RSP to allow listing libraries grouped by namespace. This fixes PR 11839. 2022-10-18 Markus Metzger gdb, solib-svr4: remove locate_base() Whenever we call locate_base(), we clear info->debug_base directly before the call. Thus, we never cache the base location as locate_base() had intended. Move the svr4_have_link_map_offsets() check into elf_locate_base(), inline locate_base() at all call sites, and remove it. 2022-10-18 Markus Metzger gdb, testsuite: extend gdb_test_multiple checks Check for warning: Corrupted shared library list and for Invalid cast. warning: Probes-based dynamic linker interface failed. Reverting to original interface. in gdb_test_multiple. 2022-10-18 Jan Beulich x86: generalize gas documentation for disabling of ISA extensions As of commit ae89daecb132 ("x86: generalize disabling of sub- architectures") there's no arbitrary subset of ISAs which can also be disabled. This should have been reflected in documentation right away. Since I failed to do so, correct this now. x86: correct CPU_AMX_{BF16,INT8}_FLAGS AMX-TILE is a prereq to these, as already correctly expressed by CPU_ANY_AMX_TILE_FLAGS. Express the dependency also in the reverse ("positive") direction. 2022-10-18 GDB Administrator Automatic date update in version.in 2022-10-17 Tom Tromey kfail an Ada test for GCC < 12 I noticed one particular Ada test was failing on Fedora 34, but works when I switch to GCC 12. This patch arranges to kfail the test when an older compiler is used. I tested this with GCC 11, 12, and 13. I'm going to check it in. 2022-10-17 Tom Tromey Remove a nullptr check in DWARF scanner In scan_attributes, The DWARF scanner checks whether maybe_defer is nullptr, but this can never happen. This patch removes the check. 2022-10-17 Pedro Alves gdbarch-components.py: Remove spurious space from "frame_info_ptr " params If you run gdbarch.py today, you'll get local modifications compared to what's in the tree, like: --- c/gdb/gdbarch-gen.h +++ w/gdb/gdbarch-gen.h @@ -315,8 +315,8 @@ extern void set_gdbarch_register_type (struct gdbarch *gdbarch, gdbarch_register should match the address at which the breakpoint was set in the dummy frame. */ -typedef struct frame_id (gdbarch_dummy_id_ftype) (struct gdbarch *gdbarch, frame_info_ptr this_frame); -extern struct frame_id gdbarch_dummy_id (struct gdbarch *gdbarch, frame_info_ptr this_frame); +typedef struct frame_id (gdbarch_dummy_id_ftype) (struct gdbarch *gdbarch, frame_info_ptr this_frame); +extern struct frame_id gdbarch_dummy_id (struct gdbarch *gdbarch, frame_info_ptr this_frame); extern void set_gdbarch_dummy_id (struct gdbarch *gdbarch, gdbarch_dummy_id_ftype *dummy_id); etc. The extra space comes from the "frame_info_ptr " param that appears in a number of gdbarch methods in gdbarch-components.py. With the extra space removed, running ./gdbarch.py generates the exact code that's in the tree already. Change-Id: If7d20b8c6b2fd9ff466142a01bd2611c9ef9f53e 2022-10-17 Tom Tromey Change .gdb_index de-duplication implementation While investigating PR symtab/29179, I found that one Ada test failed because, although a certain symbol was present in the index, with the new DWARF reader it pointed to a different CU than was chosen by earlier versions of gdb. This patch changes how symbol de-duplication is done, deferring the process until the entire symbol table has been constructed. This way, it's possible to always choose the lower-numbered CU among duplicates, which is how gdb (implicitly) previously worked. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29179 2022-10-17 Tom Tromey Improve Ada support in .gdb_index The cooked index work changed how .gdb_index is constructed, and in the process broke .gdb_index support. This is PR symtab/29179. This patch partially fixes the problem. It arranges for Ada names to be encoded in the form expected by the index code. In particular, linkage names for Ada are emitted, including the "main" name; names are Ada-encoded; and names are no longer case-folded, something that prevented operator names from round-tripping correctly. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29179 2022-10-17 Tom Tromey Don't add type linkage names to cooked index The compiler will sometimes emit a linkage name for a type, like: <1d3> DW_AT_linkage_name: (indirect string, offset: 0x106f): 11__mbstate_t These names aren't very useful, and this patch changes the DWARF reader so that they are ignored by the cooked index. 2022-10-17 Tom Tromey Fix regression in c-linkage-name.exp with gdb index c-linkage-name.exp started failing with the gdb-index target board due to an earlier patch. The problem here is that some linkage names must be in the index -- but, based on inspection, not C++ linkage names. This patch updates the code to exclude only these. 2022-10-17 TaiseiIto Fix null pointer representations Since "NULL" and "0" are used to represent invalid address in function "gdbarch_find_by_info" in "binutils-gdb/gdb/arch-utils.c", I modified them to "nullptr". 2022-10-17 Simon Marchi gdb: silence unused-but-set-variable warning about yynerrs in cp-name-parser.y When building with clang 15 on Ubuntu 20.04, I get: CXX cp-name-parser.o cp-name-parser.c.tmp:1777:9: error: variable 'cpnameyynerrs' set but not used [-Werror,-Wunused-but-set-variable] int yynerrs; ^ /home/smarchi/src/binutils-gdb/gdb/yy-remap.h:58:18: note: expanded from macro 'yynerrs' #define yynerrs GDB_YY_REMAP (yynerrs) ^ /home/smarchi/src/binutils-gdb/gdb/yy-remap.h:40:29: note: expanded from macro 'GDB_YY_REMAP' #define GDB_YY_REMAP(YYSYM) GDB_YY_REMAP_1 (GDB_YY_REMAP_PREFIX, YYSYM) ^ /home/smarchi/src/binutils-gdb/gdb/yy-remap.h:39:39: note: expanded from macro 'GDB_YY_REMAP_1' #define GDB_YY_REMAP_1(PREFIX, YYSYM) GDB_YY_REMAP_2 (PREFIX, YYSYM) ^ /home/smarchi/src/binutils-gdb/gdb/yy-remap.h:38:39: note: expanded from macro 'GDB_YY_REMAP_2' #define GDB_YY_REMAP_2(PREFIX, YYSYM) PREFIX ## YYSYM ^ :45:1: note: expanded from here cpnameyynerrs ^ This is because clang 15 warns for something like this: int n; n = 0; ++n; whereas previous versions do not. yynerrs is defined in yyparse and is there for actions to use. Since the actions in cp-name-parser.y don't use it, we get a warning. We see this problem on this particular .y file because it uses `%pure-parser` [1], which makes yynerrs a local rather than a global. I initially fixed this by using DIAGNOSTIC_IGNORE_UNUSED_BUT_SET_VARIABLE (like in commit f7aa1a5acc5 ("gold: Suppress "unused" variable warning on Clang")), but then I realized we could suppress the warning in a more fine-grained way using this in a rule: (void) yynerrs; [1] https://www.gnu.org/software/bison/manual/html_node/Error-Reporting-Function.html Change-Id: I6cae7a4207c19fe1b719e2ac19be69122ebe3af1 2022-10-17 Clément Chigot ld/testsuite: consistently add board_ldflags when linking with GCC Currently, the functions checking if the compiler is available or if a feature is available add both board_cflags and board_ldflags. However, functions running the tests only retrieve board_cflags. This can lead to unexpected errors when mandaratory flags are defined in board_ldflags and not board_cflags. ld/ChangeLog: * testsuite/ld-unique/unique.exp: Add board_ldflags when linking with GCC. * testsuite/lib/ld-lib.exp: Likewise. 2022-10-17 CaiJingtao Allow explicit size specifier for predicate operand of {sq, uq, }{incp, decp} Omitting predicate size specifier in vector form of {sq, uq, }{decp, incp} is deprecated and will be prohibited in a future release of the aarch64, see https://developer.arm.com/documentation/ddi0602/2021-09/SVE-Instructions/DECP--vector---Decrement-vector-by-count-of-true-predicate-elements-. This allows explicit size specifier, e.g. `decp z0.h, p0.h`, for predicate operand of these SVE instructions. The existing behaviour of not requiring the specifier is preserved. And the disasembly is with the specifier with this patch. The GAS tests passed under our local tests. opcodes/ * aarch64-asm.c: Modify `sve_size_hsd` encoding. * aarch64-tbl.h (aarch64_opcode_table): Add QUALS's type OP_SVE_Vv_HSD for decp, incp, sqdecp, sqincp, uqdecp and uqincp. gas/ * testsuite/gas/aarch64/sve-movprfx_23.s: Update movprfx_23 testcase's test_sametwo macro, where take the predicate size specifier. * testsuite/gas/aarch64/sve-movprfx_23.d: Update movprfx_23 testcase's expected disassembly. * testsuite/gas/aarch64/sve-movprfx_23.l: Update movprfx_23 testcase's expected assembler messages. * testsuite/gas/aarch64/sve.s: Add sve testcase's instructions for decp, incp, sqdecp, sqincp, uqdecp and uqincp, which take the predicate size specifier. * testsuite/gas/aarch64/sve.d: Update sve testcase's expected disassembly. 2022-10-17 Richard Sandiford aarch64: Tweak handling of F_STRICT Current F_STRICT qualifier checking is enforced after the fact rather than as part of the match. This makes it impossible to have, e.g.: QLF2(S_D, S_D) QLF2(S_D, NIL) in the same list. opcodes/ * aarch64-opc.c (aarch64_find_best_match): Handle F_STRICT here rather than... (match_operands_qualifier): ...here. 2022-10-17 Jan Beulich x86: properly decode EVEX.W for AVX512_4{FMAPS,VNNIW} insns These require EVEX.W=0. Use %XS to facilitate the checking, even if for the AVX512_4VNNIW ones this is kind of an abuse (as 's' there stands for "signed", not "single"). While there also correct the 3rd operand for the AVX512_4VNNIW entries: Only the memory form is allowed (just like for AVX512_4FMAPS, where the correct type is already in use). 2022-10-17 Jan Beulich x86: fold AVX512-VNNI disassembler entries with AVX-VNNI ones Make %XV also print the separating blank in the VEX case, while making it do nothing for EVEX-encoded insns. This way the AVX-VNNI entries can be re-used for AVX512-VNNI, at the same time fixing the lack of EVEX.W decoding. For the AVX-VNNI ones further make sure only VEX.66 forms are actually decoded. 2022-10-17 GDB Administrator Automatic date update in version.in 2022-10-16 Tom Tromey More uses of checked_static_cast This patch changes a few more uses of static_cast to use checked_static_cast. In this patch, cast-to-references are converted by moving the dereference outside of the cast, as checked_static_cast only handles pointers. 2022-10-16 Tom Tromey Use checked_static_cast in more places I looked through all the uses of static_cast<... *> in gdb and converted many of them to checked_static_cast. I couldn't test a few of these changes. 2022-10-16 Alan Modra PowerPC se_rfmci and VLE, SPE2 and LSP insns with -many I noticed recently that se_rfmci, a VLE mode instruction, was being accepted by non-VLE cpus, and also that se_rfmci by itself in a section did not cause SHF_PPC_VLE to be set. ie. both testcases added by this patch fail without the changes to tc-ppc.c here. Also, VLE, SPE2 and LSP insns were not accepted by the assembler with -many nor were SPE2 and LSP being disassembled with -Many. gas/ * config/tc-ppc.c (ppc_setup_opcodes): Wrap long lines. Add vle_opcodes when PPC_OPCODE_VLE or PPC_OPCODE_ANY. Simplify disassembler index segment checks. Add LSP and SPE2 opcodes when PPC_OPCODE_ANY too. (md_assemble): Correct logic adding PPC_APUINFO_VLE and SHF_PPC_VLE. * testsuite/gas/ppc/se_rfmci.s * testsuite/gas/ppc/se_rfmci.d, * testsuite/gas/ppc/se_rfmci_bad.d: New tests. * testsuite/gas/ppc/ppc.exp: Run them. opcodes/ * ppc-dis.c (print_insn_powerpc): Disassemble SPE2 and LSP insn when -Many. * ppc-opc.c (vle_opcodes ): Comment. 2022-10-16 Alan Modra zlib-gabi to zstd woes So we had a zlib-gabi .debug_info section that increased in size with zstd, so much so that it was better to leave the section uncompressed. Things went horribly wrong when the section was read again later. The section was read again off disk using the uncompressed size. So you get the zlib section again with some garbage at the end. Fix that particular problem by setting the section flag SEC_IN_MEMORY. Any future read will get sec->contents. Also, if the section is to be left uncompressed, the input SHF_COMPRESSED flag needs to be reset otherwise objcopy will copy it to output. Finally, bfd_convert_section_contents needed a small update to handle zstd compressed sections, and I've deleted bfd_cache_section_contents. * bfd.c (bfd_convert_section_contents): Handle zstd. * compress.c (bfd_compress_section_contents): When section contents are uncompressed set SEC_IN_MEMORY flag, compress_status to COMRESS_SECTION_NONE, and clear SHF_COMPRESSED. Set SEC_IN_MEMORY for compressed contents. (bfd_get_full_section_contents): Don't check section size against file size when SEC_IN_MEMORY. (bfd_cache_section_contents): Delete function. * elf32-arm.c (elf32_arm_get_synthetic_symtab): Expand bfd_cache_section_contents here. * bfd-in2.h: Regenerate. 2022-10-16 GDB Administrator Automatic date update in version.in 2022-10-15 Torbjörn SVENSSON gdb/arm: Don't rely on loop detection to stop unwinding Setting SP of the next frame to the same address as the current frame is an ugly way to stop the unwinding. A cleaner way is to rely on the frame_unwind_stop_reason function to return UNWIND_OUTERMOST. 2022-10-15 GDB Administrator Automatic date update in version.in 2022-10-14 Tom de Vries [gdb/testsuite] Add boards/README Add a file gdb/testsuite/boards/README, to make it easier to get a high-level overview of the various boards. 2022-10-14 Tom de Vries [gdb/contrib] Handle STRIP_ARGS_{STRIP,KEEP}_DEBUG in cc-with-tweaks.sh Handle new environment variable STRIP_ARGS_STRIP_DEBUG, defaulting to --strip-debug in gdb/contrib/cc-with-tweaks.sh, such that we can easily reproduce the PR29277 assert using: ... $ export STRIP_ARGS_STRIP_DEBUG=--strip-all $ make check RUNTESTFLAGS="gdb.base/jit-reader.exp \ --target_board cc-with-gnu-debuglink" ... For completeness sake and to avoid confusion about which of the two used strip invocations the passed args apply to, likewise add STRIP_ARGS_KEEP_DEBUG, defaulting to --only-keep-debug. Script checked with shellcheck, no new warnings added. Tested on x86_64-linux. 2022-10-14 Tom de Vries [gdb] Fix heap-buffer-overflow in find_program_interpreter With the test-case included in this patch, we run into: ... (gdb) target remote localhost:2347^M `target:twice-connect' has disappeared; keeping its symbols.^M Remote debugging using localhost:2347^M warning: Unable to find dynamic linker breakpoint function.^M GDB will be unable to debug shared library initializers^M and track explicitly loaded dynamic code.^M Reading /usr/lib/debug/.build-id/$hex/$hex.debug from remote target...^M 0x00007ffff7dd4550 in ?? ()^M (gdb) PASS: gdb.server/twice-connect.exp: session=second: gdbserver started FAIL: gdb.server/twice-connect.exp: found interpreter ... The problem originates in find_program_interpreter, where bfd_get_section_contents is called to read .interp, but fails. The function returns false but the result is ignored, so find_program_interpreter returns some random string. Fix this by checking the result of the call to bfd_get_section_contents. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29652 2022-10-14 Tom de Vries [gdb/testsuite] Fix gdb.server/unittest.exp with host board local-remote-host.exp With test-case gdb.server/unittest.exp and host board local-remote-host.exp I run into: ... builtin_spawn build/gdbserver/gdbserver --selftest^M ERROR: : spawn id exp7 not open while executing "expect { -i exp7 -timeout 10 -i $server_spawn_id -re "Ran ($decimal) unit tests, 0 failed" { set num_ran $expect_out(1,string) gdb_assert "..." ("uplevel" body line 1) invoked from within "uplevel $body" NONE : spawn id exp7 not open UNRESOLVED: gdb.server/unittest.exp: unit tests ... The problem is (as fixed for avr in commit df5b8876083 ("gdb/testsuite: better handle failures in simavr board, reap simavr process")), that gdb_expect through remote_expect adds a "-i -timeout 10", which is the one causing the error. As in aforementioned commit, fix this by using expect instead. Tested on x86_64-linux. 2022-10-14 Tom de Vries [gdb/testsuite] Fix host board local-remote-host-notty.exp timeouts With test-case gdb.server/stop-reply-no-thread-multi.exp and host board local-remote-host-notty.exp we occasionally run into a silent out, due to getting: ... (gdb) kill^M (gdb) The program is not being run.^M ... instead of the expected: ... (gdb) kill^M The program is not being run.^M (gdb) ... Likewise, we occasionally run into a nonsilent timeout: ... (gdb) disconnect^M (gdb) You can't do that when your target is `exec'^M FAIL: gdb.server/stop-reply-no-thread.exp: to_disable=Tthread: t_nonstop=on: \ disconnect (timeout) ... Typically, this results in the test-case taking more than two minutes to run. The problem can be reproduced using just: ... $ ssh -l $USER 127.0.0.1 gdb -q -ex kill ... Note that ssh by default uses -T which disables pseudo-tty allocation (as opposed to -t which forces pseudo-tty allocation): ... $ ssh -l $USER 127.0.0.1 -T tty not a tty $ ssh -l $USER 127.0.0.1 -t tty /dev/pts/5 Connection to 127.0.0.1 closed. ... and according to https://stackoverflow.com/a/63241102 the behaviour we're seeing is specific to using '-T'. The related host board local-remote-host.exp does use '-t', and the only difference between the two boards mentioned is whether editing is on or off. Fix this by: - moving the content of local-remote-host-notty.exp into local-remote-host.exp - consequently, extending the copyright years in local-remote-host.exp - including local-remote-host.exp in local-remote-host-notty.exp (making local-remote-host-notty.exp use '-t') - adding -iex "set editing off" to GDBFLAGS in local-remote-host-notty.exp This results in the test-case taking just 6 seconds to run. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29669 2022-10-14 Tom de Vries [gdb/testsuite] Disable styling in host board local-remote-host.exp With test-case gdb.server/stop-reply-no-thread.exp and host board local-remote-host.exp, I run into: ... Breakpoint 1, ^[[33mmain^[[m () at ^[[32mstop-reply-no-thread.c^[[m:21^M 21 ^[[01;34mreturn^[[m ^[[35m0^[[m^[[31m;^[[m^M (gdb) FAIL: gdb.server/stop-reply-no-thread.exp: to_disable=: t_nonstop=off: \ continue to main ... The problem is that styling is enabled, and that is causing a regexp mismatch. With native, styling is disabled in default_gdb_init by doing 'setenv TERM "dumb"', but that only has effect because the build (where we execute runtest, and consequently the setenv) and the host (where we execute gdb) are the same. For this host board however, gdb executes on a remote host, and the setenv has no effect. We could try to make some generic way to set TERM on the host, but for the purposes of this test-case it seems sufficient to just add: ... set GDBFLAGS "${GDBFLAGS} -iex \"set style enabled off\"" ... so let's go with that for now. Tested on x86_64-linux. 2022-10-14 Tom Tromey Use scoped_value_mark in more places I looked at all the spots using value_mark, and converted all the straightforward ones to use scoped_value_mark instead. Regression tested on x86-64 Fedora 34. 2022-10-14 Torbjörn SVENSSON gdb/arm: Stop unwinding on error, but do not assert When it's impossible to read the FPCCR and XPSR, the unwinding is unpredictable as the it's not possible to determine the correct frame size or padding. The only sane thing to do in this condition is to stop the unwinding. Example session without this patch: (gdb) bt #0 SVC_Handler () at .../GPIO/GPIO_EXTI/Src/stm32f4xx_it.c:112 .../gdb/arm-tdep.c:3594: internal-error: arm_m_exception_cache: Assertion `safe_read_memory_unsigned_integer (FPCCR, ARM_INT_REGISTER_SIZE, byte_order, &fpccr)' failed. A problem internal to GDB has been detected, further debugging may prove unreliable. ----- Backtrace ----- 0x5583bfb2a157 gdb_internal_backtrace_1 ... --------------------- This is a bug, please report it. For instructions, see: . Aborted (core dumped) Example session with this patch: (gdb) bt #0 SVC_Handler () at .../GPIO/GPIO_EXTI/Src/stm32f4xx_it.c:112 warning: Could not fetch required FPCCR content. Further unwind is impossible. #1 (gdb) Reviewed-by: Pedro Alves 2022-10-14 Alan Modra PowerPC SPE disassembly and tests Where sub and subf forms of an instruction exist we generally disassemble to the extended insn sub form rather than the underlying machine subf instruction. Do so for SPE evsubw and evsubiw too. spe_ambiguous.d always was a bit too optimistic. There is no sensible way to disassemble identical bytes back to different and original source. Instead change the test to check -Mraw results. gas/ * testsuite/gas/ppc/ppc.exp: Run spe_ambiguous test. * testsuite/gas/ppc/spe.d: Expect evsubw and evsubiw rather than evsubfw and evsubifw. * testsuite/gas/ppc/spe_ambiguous.s: Test evnor form equivalent to evnot. * testsuite/gas/ppc/spe_ambiguous.d: Test Mraw. opcodes/ * ppc-opc.c (powerpc_opcodes): Move evsubw before evsubfw and evsubiw before evsubifw and mark EXT. 2022-10-14 Alan Modra e200 LSP support It has bothered me for a long time that we have disabled LSP (and SPE) tests. Also the LSP test comment indicating there is something wrong with get_powerpc_dialect. I don't think there is. Decoding of a VLE instruction depends on whether the processor is in VLE mode (some processors support both VLE and standard PPC) which we flag per section with SHF_PPC_VLE for decoding when disassembling. Background: Some versions of powerpc e200 have "Lightweight Signal Processing" support, examples being e200z215 and e200z425. As far as I can tell, LSP and SPE are mutually exclusive. This seems to be borne out by insn encoding, for example LSP "zvaddih" and SPE "evaddw" have the same encoding. So none of the processor descriptions in ppc_opts ought to have both PPC_OPCODE_LSP and PPC_OPCODE_SPE/2, if we want disassembly to work. I also could not find anything to suggest that the LSP insns are enabled only in VLE mode, which means the LSP insns should not be in vle_opcodes. Fix all this by moving the LSP insns to their own table, and add a new e200z2 cpu entry with LSP support, removing LSP from -me200z4 and from -mvle. (Yes, I know, as I said above some of the e200z4 processors have LSP. Others have SPE. It's hard to choose good options. Think of z2 as meaning earlier, z4 as later.) Also add -mlsp to allow adding the LSP insn set. include/ * opcode/ppc.h (lsp_opcodes, lsp_num_opcodes): Declare. (LSP_OP_TO_SEG): Define. binutils/ * doc/binutils.texi: Update ppc docs. gas/ * config/tc-ppc.c (ppc_setup_opcodes): Add lsp opcodes to ppc_hash. * doc/c-ppc.texi: Document e200 and lsp. * testsuite/gas/ppc/lsp-checks.d: Assemble with -me200z2. * testsuite/gas/ppc/lsp.d: Likewise, disassembly too. * testsuite/gas/ppc/ppc.exp: Don't xfail lsp test. opcodes/ * ppc-dis.c (ppc_opts): Add e200z2 and lsp. Don't set PPC_OPCODE_LSP for e200z4 or vle. (ppc_parse_cpu): Mutually exclude LSP and SPE. (LSP_OPCD_SEGS): Define. (lsp_opcd_indices): New array. (disassemble_init_powerpc): Init lsp_opcd_indices. (lookup_lsp): New function. (print_insn_powerpc): Call it. * ppc-opc.c: Include libiberty.h for ARRAY_SIZE and use throughout. (vle_opcodes): Move LSP opcodes to.. (lsp_opcodes): ..here, and sort. (lsp_num_opcodes): New. 2022-10-14 Alan Modra PR29677, Field `the_bfd` of `asymbol` is uninitialised Besides not initialising the_bfd of synthetic symbols, counting symbols when sizing didn't match symbols created if there were any dynsyms named "". We don't want synthetic symbols without names anyway, so get rid of them. Also, simplify and correct sanity checks. PR 29677 * mach-o.c (bfd_mach_o_get_synthetic_symtab): Rewrite. 2022-10-14 Tom de Vries [gdb/testsuite] Drop unnecessary -Wl,-soname in gdb.base/skip-solib.exp I noticed in gdb.base/skip-solib.exp: ... if {[gdb_compile_shlib ${srcdir}/${subdir}/${srcfile_lib} ${binfile_lib} \ [list debug -Wl,-soname,${libname}.so]] != ""} { return -1 } ... that the -Wl,-soname argument is missing an ldflags= prefix, but adding it gives us a duplicate: ... Executing on host: gcc -fno-stack-protector \ outputs/gdb.base/skip-solib/skip-solib-lib.c.o -fdiagnostics-color=never \ -shared -g -Wl,-soname,libskip-solib.so -Wl,-soname,libskip-solib.so -lm \ -o outputs/gdb.base/skip-solib/libskip-solib.so (timeout = 300) ... so apparently it's taken care of by gdb_compile_shlib. Drop the inactive and also unnecessary -Wl,-soname,${libname}.so from the flags list for the gdb_compile_shlib call. Tested on x86_64-linux. 2022-10-14 Tom de Vries [gdb/testsuite] Fix gdb.base/infoline-reloc-main-from-zero.exp with PIE With test-case gdb.base/infoline-reloc-main-from-zero.exp and target board unix/-fPIE/-pie I run into: ... gdb compile failed, ld: infoline-reloc-main-from-zero: error: \ PHDR segment not covered by LOAD segment collect2: error: ld returned 1 exit status ... When running with native, I find that the executable is static: ... $ file infoline-reloc-main-from-zero infoline-reloc-main-from-zero: ELF 64-bit LSB executable, x86-64, \ version 1 (SYSV), statically linked, BuildID[sha1]=$hex, with debug_info, \ not stripped ... despite not having been compiled with -static. Fix the compilation by adding -static to the compilation flags. Tested on x86_64-linux. 2022-10-14 Tom de Vries [gdb/testsuite] Fix gdb.base/infoline-reloc-main-from-zero.exp with clang With test-case gdb.base/infoline-reloc-main-from-zero.exp and clang I run into: ... gdb compile failed, clang-13.0: warning: -e main: 'linker' input unused \ [-Wunused-command-line-argument] clang-13.0: warning: -Wl,-Ttext=0x00: 'linker' input unused \ [-Wunused-command-line-argument] clang-13.0: warning: -Wl,-N: 'linker' input unused \ [-Wunused-command-line-argument] UNTESTED: gdb.base/infoline-reloc-main-from-zero.exp: \ infoline-reloc-main-from-zero.exp UNTESTED: gdb.base/infoline-reloc-main-from-zero.exp: failed to compile ... Fix this by using ldflags instead of additional_flags. Likewise, fix all occurrences of: ... $ find gdb/testsuite -name *.exp | xargs grep additional_flags.*Wl ... Tested on x86_64-linux. 2022-10-14 Tom de Vries [gdb/testsuite] Fix nopie test-cases with target board unix/-fPIE/-pie Compilers default to either PIE or no-PIE executables. In order to test PIE executables with a compiler that produces non-PIE by default, we can use target board unix/-fPIE/-pie, which set the multilib_flags of the target board to "-fPIE -pie". Likewise, we can use target board unix/-fno-PIE/-no-pie with a compiler that produces PIE by default. The target board unix/-fno-PIE/-no-pie has a potential problem when compiling shared libs, because the multilib_flags will override the attempts of gdb_compile_shlib to compile with -fPIC. This is taken care of by running the body of gdb_compile_shlib wrapped in with_PIE_multilib_flags_filtered. The target board unix/-fPIE/-pie has a problem with nopie compilations. The current approach is to do the compilation hoping for the best, and if we find out that the resulting executable is PIE despite specifying nopie, we error out with the standard error message "nopie failed to prevent PIE executable". That however does not work for hard-coded assembly nopie test-cases, which will just noisily refuse to compile: ... ld: amd64-disp-step0.o: relocation R_X86_64_32S against `.text' can not be \ used when making a PIE object; recompile with -fPIE^M ... Fix this in gdb_compile by filtering out the PIE settings in the target board multilib_flags when pie or nopie is specified. Tested on x86_64-linux. 2022-10-14 Tom de Vries [gdb/testsuite] Factor out with_PIE_multilib_flags_filtered Factor out new procs with_PIE_multilib_flags_filtered and with_multilib_flags_filtered from proc gdb_compile_shlib. Tested on x86_64-linux. 2022-10-14 Tom de Vries [gdb/testsuite] Add cond_wrap proc Add a new proc cond_wrap, that can be used to replace the repetitive: ... if { $cond } { wrap { } } else { } ... with the shorter: ... cond_wrap $cond wrap { } ... Tested on x86_64-linux. 2022-10-14 Torbjörn SVENSSON gdb: add Torbjörn Svensson to gdb/MAINTAINERS 2022-10-14 Jan Beulich RISC-V: Zicbo{m,p,z} adjustments to riscv_multi_subset_supports_ext() The lack thereof did caused gas to issue "internal: unreachable INSN_CLASS_*" errors when trying to assemble respective insns without the feature(s) enabled via e.g. ".option arch, ...". Of course a proper hint towards the missing extension then wasn't given either. 2022-10-14 Tsukasa OI RISC-V: Imply 'Zicsr' from privileged extensions with CSRs 'H', 'Smstateen', 'Sscofpmf' and 'Sstc' are four privileged extensions with their CSR definitions and 'Smepmp' is a privileged extension with additional CSR bits. Volume II: Privileged Architecture of the RISC-V ISA Manual states that the privileged architecture requires the 'Zicsr' extension. However, current GNU Binutils has no direct way whether the program has dependency to the privileged architecture itself. As a workaround, we should add implications from privileged extensions that either add new CSRs, extend existing CSRs or depends on using CSRs. This commit adds such implications for existing privileged extensions that satisfy this condition. gas/ChangeLog: * testsuite/gas/riscv/march-imply-h.d: New test, at least for 'H'. bfd/ChangeLog: * elfxx-riscv.c (riscv_implicit_subsets): Add 'Zicsr' implicications for privileged extensions 'H', 'Smstateen', 'Sscofpmf', 'Sstc' and 'Smepmp'. 2022-10-14 Tsukasa OI opcodes/riscv-dis.c: Remove last_map_state Before changing the core disassembler, we take care of minor code clarity issues and improve readability. This commit removes unused variable last_map_state (set by the print_insn_riscv function but not read anywhere else). opcodes/ChangeLog: * riscv-dis.c (last_map_state): Remove. (print_insn_riscv): Remove setting last_map_state. 2022-10-14 Tsukasa OI opcodes/riscv-dis.c: Make XLEN variable static Before changing the core disassembler, we take care of minor code clarity issues and improve readability. Since xlen variable is not (and should not) used outside riscv-dis.c, this commit makes this variable static. opcodes/ChangeLog: * riscv-dis.c (xlen): Make this variable static. 2022-10-14 Tsukasa OI opcodes/riscv-dis.c: Use bool type whenever possible Before changing the core disassembler, we take care of minor code clarity issues and improve readability. This commit replaces uses of int with bool whenever possible. opcodes/ChangeLog: * riscv-dis.c (no_aliases) Change type to bool. (set_default_riscv_dis_options): Use boolean. (parse_riscv_dis_option_without_args): Likewise. (riscv_disassemble_insn): Use boolean keywords. 2022-10-14 Tsukasa OI opcodes/riscv-dis.c: Tidying with spacing Before changing the core disassembler, we take care of minor code clarity issues and improve readability. This commit takes care of improper spacing for code clarity. opcodes/ChangeLog: * riscv-dis.c (riscv_disassemble_insn): Tidying with spacing. 2022-10-14 Tsukasa OI opcodes/riscv-dis.c: Tidying with comments/clarity Before changing the core disassembler, we take care of minor code clarity issues and improve readability. First, we need to clarify the roles of variables and code portions. opcodes/ChangeLog: * riscv-dis.c (xlen): Move before default_isa_spec. Add comment. (default_isa_spec, default_priv_spec): Add comment. (riscv_gpr_names, riscv_fpr_names): Likewise. (parse_riscv_dis_option_without_args): Likewise. (parse_riscv_dis_option, parse_riscv_dis_options): Likewise. (maybe_print_address): Likewise. (riscv_disassemble_insn): Fix comment about the Zfinx "extension". Add comment about the riscv_multi_subset_supports call. 2022-10-14 Tsukasa OI RISC-V: Test DWARF register number for "fp" This commit adds "fp" (x8 or s0) to dw-regnums.{s,d}. gas/ChangeLog: * testsuite/gas/riscv/dw-regnums.s: Add "fp". * testsuite/gas/riscv/dw-regnums.d: Likewise. 2022-10-14 Tsukasa OI RISC-V: Move standard hints before all instructions Because all standard hints must be placed before corresponding instruction for the disassembler, they may taint basic RVI instruction section. This commit moves all standard hints before all basic RVI instructions to improve maintainability. opcodes/ChangeLog: * riscv-opc.c (riscv_opcodes): Move all standard hints before all standard instructions. 2022-10-14 Tsukasa OI RISC-V: Move certain arrays to riscv-opc.c This is a part of small tidying (declare tables in riscv-opc.c). include/ChangeLog: * opcode/riscv.h (riscv_rm, riscv_pred_succ): Move declarations to opcodes/riscv-opc.c. New non-static definitions. opcodes/ChangeLog: * riscv-opc.c (riscv_rm, riscv_pred_succ): Move from include/opcode/riscv.h. Add description. 2022-10-14 Fangrui Song ld: Add --undefined-version This cancels a previous --no-undefined-version. gold has had --undefined-version for a long time. 2022-10-14 GDB Administrator Automatic date update in version.in 2022-10-13 Carl Love PowerPC, fix gdb.base/watchpoint.exp on Power 9 Test gdb.base/watchpoint.exp generates 4 test errors on Power 9. The test uses the test [target_info exists gdb,no_hardware_watchpoints] to determine if the processor supports hardware watchpoints. The check only examines the processor type to determine if it supports hardware watchpoints. The PowerPC processors support hardware watchpoints with the exception of Power 9. The hardware watchpoint support is disabled on Power 9. The test skip_hw_watchpoint_tests must be used to correctly determine if the PowerPC processor supports hardware watchpoints. This patch replaces the [target_info exists gdb,no_hardware_watchpoints] with the skip_hw_watchpoint_tests_p check. With the patch, the test runs on Power 9 with hardware watchpoint force-disabled. The test runs on all other PowerPC processors with and without hardware watchpoints enabled. The patch has been tested on Power 9 to verify the test only runs with hardware breakpoints disabled. The patch has been tested on X86-64 with no regression failures. The test fails on Power 10 due to an internal GDB error due to resource management. The resource management issue will be addressed in another patch. 2022-10-13 Tom de Vries [gdb/testsuite] Fix gdb.dwarf2/macro-source-path.exp with -m32 With test-case gdb.dwarf2/macro-source-path.exp and target board unix/-m32, I run into: ... as: macro-source-path-gcc11-ld238-dw5-filename-641.o: \ unsupported relocation type: 0x1^M ... The problem is that we have 64-bit dwarf so the debug_line offset in the .debug_macro section is an 8-byte entity, emitted using ".8byte": ... .section .debug_macro .Lcu_macros4: .2byte 5 /* version */ .byte 3 /* flags */ .8byte .LLlines3 /* debug_line offset */ ... but the linker doesn't support 8-byte relocation types on a 32-bit architecture. This is similar to what was fixed in commit a5ac8e7fa3b ("[gdb/testsuite] Fix 64-bit dwarf test-cases with -m32") for for instance .debug_abbrev. Fix this in the same way, by using _op_offset to emit the debug_line offset. Tested on x86_64-linux with native and target board unix/-m32. 2022-10-13 Tom de Vries [gdb/testsuite] Fix gdb.dwarf2/entry-value-typedef.exp with -m32 With test-case gdb.dwarf2/entry-value-typedef.exp and target board unix/-m32, I run into: ... builtin_spawn -ignore SIGHUP g++ -fno-stack-protector \ gdb/testsuite/gdb.dwarf2/entry-value-typedef-amd64.S \ -fdiagnostics-color=never -Lbuild/libiberty -lm -m32 \ -o outputs/gdb.dwarf2/entry-value-typedef/entry-value-typedef^M entry-value-typedef.cpp: Assembler messages:^M entry-value-typedef.cpp:38: Error: bad register name `%rbp'^M ... The problem is that the test-cases selects an amd64 .S file based on the check: ... if { [istarget "x86_64-*-linux*"] } { ... which is also true for target board unix/-m32 on x86_64-linux. Fix this by adding the missing is_lp64_target check. Tested on x86_64-linux, using native and target board unix/-m32. 2022-10-13 Tom de Vries [gdb/testsuite] Fix gdb.mi/mi-disassemble.exp with -m32 With target board unix/-m32 and test-case gdb.mi/mi-disassemble.exp we have: ... (gdb) ^M print/x *((unsigned char *) 0x8048485)^M &"print/x *((unsigned char *) 0x8048485)\n"^M ~"$9 = 0x83\n"^M ^done^M (gdb) ^M PASS: gdb.mi/mi-disassemble.exp: get valueof "*((unsigned char *) 0x8048485)" FAIL: gdb.mi/mi-disassemble.exp: byte at 0x8048485 matches ... The test-case passes with native. With native we see in gdb.log that variable longest_insn_bytes is: ... Longest instruction at 0x0000000000400549 with bytes '48 8b 05 20 01 00 00' ... and variable split_bytes (added debug puts) ends up as: ... SPLIT_BYTES: 48 8b 05 20 01 00 00 ... But with unix/-m32 we have longest_insn_byte: ... Longest instruction at 0x08048481 with bytes '8d 4c 24 04 ' ... and split_bytes ends up as: ... SPLIT_BYTES: 8d 4c 24 04 {} {} {} {} {} {} {} {} ... so the trailing whitespace is translated by split to empty bytes, and the mismatch FAILs are generated for those. Fix this by stripping the whitespace, which makes us end up with a different and indeed longer insn: ... Longest instruction at 0x08048492 with bytes 'dd 05 98 85 04 08' ... Tested on x86_64-linux, with native and target board unix/-m32. 2022-10-13 GDB Administrator Automatic date update in version.in 2022-10-12 Carl Love PowerPC, fix test gdb.base/watchpoint-stops-at-right-insn.exp Test gdb.base/watchpoint-stops-at-right-insn.exp generates 4 test errors on Power 9. The test uses the test [target_info exists gdb, no_hardware_watchpoints] to determine if the processor supports hardware watchpoints. The check only examines the processor type to determine if it supports hardware watchpoints. Note, the test works fine on Power 10. The PowerPC processors support hardware watchpoints with the exception of Power 9. The hardware watchpoint support is disabled on Power 9. The test skip_hw_watchpoint_tests must be used to correctly determine if the PowerPC processor supports hardware watchpoints. This patch replaces the [target_info exists gdb,no_hardware_watchpoints] with the skip_hw_watchpoint_tests_p check. With the patch, the test is disabled on Power 9 but runs on all other PowerPC processors. The patch has been tested on Power 9, Power 10 and X86-64 with no regression failures. 2022-10-12 Jan Beulich x86: drop "regmask" static variable Replace its two uses by more direct checks, paralleling what's already there for SIMD registers. 2022-10-12 Tom de Vries [gdb/symtab] Factor out elf_symfile_read_dwarf2 Factor out elf_symfile_read_dwarf2 from elf_symfile_read. NFC. Tested on x86_64-linux. 2022-10-12 Tom de Vries [gdb/testsuite] Fix ctf test-cases on openSUSE Tumbleweed When running test-case gdb.base/ctf-constvars.exp on openSUSE Tumbleweed (with system gcc version 12, providing gcc -gctf support, enabling the ctf test-cases in the gdb testsuite), I run into: ... (gdb) print vox^M 'vox' has unknown type; cast it to its declared type^M (gdb) FAIL: gdb.base/ctf-constvars.exp: print vox ... There are two causes for this: - the linker flags are missing --ctf-variables, so the information for variable vox is missing (reported in PR29468), and - the executable contains some dwarf2 due to some linked-in glibc objects, so the ctf info is ignored (reported in PR29160). By using: - -Wl,--ctf-variable, - -Wl,--strip-debug, and we can make the test-case and some similar test-cases pass. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29160 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29468 2022-10-12 Tom de Vries [gdb/testsuite] Silence warnings about obsolete -gstabs When running test-case gdb.base/gdbindex-stabs.exp on openSUSE Tumbleweed (with gcc 12) I get: ... gdb compile failed, gdb/testsuite/gdb.base/gdbindex-stabs.c: warning: \ STABS debugging information is obsolete and not supported anymore ... Silence the warning by passing quiet to gdb_compile. Likewise in two other test-cases. 2022-10-12 Tom de Vries [gdb/testsuite] Replace remaining -gt with -gctf With test-cases gdb.base/cvexpr.exp and gdb.base/whatis.exp I run into: ... gdb compile failed, gcc: error: unrecognized debug output level 't' ... This is due to using additional_flags=-gt. Commit ffb3f587933 ("CTF: multi-CU and archive support") replaced additional_flags=-gt with additional_flags=-gctf in gdb.ctf/*.exp and gdb.base/ctf-*.exp. Do the same in these two test-cases. Tested on x86_64-linux. 2022-10-12 Tom de Vries [gdb/testsuite] Fix gdb.base/infoline-reloc-main-from-zero.exp with recent ld On openSUSE Tumbleweed (with ld 2.39) and test-case gdb.base/infoline-reloc-main-from-zero.exp, I get: ... gdb compile failed, ld: warning: infoline-reloc-main-from-zero has a LOAD \ segment with RWX permissions UNTESTED: gdb.base/infoline-reloc-main-from-zero.exp: \ infoline-reloc-main-from-zero.exp ... Fix this by compiling with -Wl,--no-warn-rwx-segments. Tested on x86_64-linux. 2022-10-12 Tom de Vries [gdb/testsuite] Fix gdb.base/nested-subp{2,3}.exp with recent ld On openSUSE Tumbleweed (with ld 2.39) I get for test-case gdb.base/nested-subp2.exp: ... gdb compile failed, ld: warning: tmp.o: requires executable stack \ (because the .note.GNU-stack section is executable) ... Fix this by compiling with -Wl,--no-warn-execstack. Likewise in gdb.base/nested-subp3.exp Tested on x86_64-linux. 2022-10-12 Tom de Vries [gdb/testsuite] Remove unnecessary perror in some test-cases On openSUSE Tumbleweed I noticed: ... UNTESTED: gdb.dwarf2/fission-absolute-dwo.exp: fission-absolute-dwo.exp ERROR: failed to compile fission-absolute-dwo ... The ERROR is unnecessary, given that an UNTESTED is already emitted. Furthermore, it could be argued that it is incorrect because it's not a testsuite error to not be able to compile something, and UNTESTED or UNSUPPORTED is more appropriate. Remove the perror call, likewise in fission-relative-dwo.exp. Tested on x86_64-linux. 2022-10-12 Nick Clifton Fix objcopy's error message when it cannot add a .gnu_debuglink section because the section already exists. PR 29665 * objcopy.c (copy_object): Use the input filename when reporting that a .gnu_debuglink section already exists. 2022-10-12 Tsukasa OI sim/ppc: Fix core_find_mapping diagnostics Because "%p" is the pointer conversion specifier to print a pointer in an implementation-defined manner, the result with format string containing "0x%p" can be strange. For instance, core_map_find_mapping prints error containing "0x0x...." (processor is not NULL) or "0x(null)" (processor is NULL) on glibc. This commit replaces "0x%p" with "%p" to prevent unpredictable behavior. 2022-10-12 Andrew Burgess sim/ppc: fixes for arguments to printf style functions After the recent series of fixes to mark more functions in the simulator with ATTRIBUTE_PRINTF, there were some build failures in the ppc sim due, in some cases, to bugs with the arguments being passed, and in other cases, the issues were (maybe) less serious, with arguments being the wrong size, or type, for the printf format being used. This commit fixes all of the issues that I ran into. In each case I selected the easiest solution to the problem, which is usually just casting the argument to the correct type. If anyone later on thinks the print format should change, please feel free to do that. What we have here should keep the simulator basically working as it does currently, which is my goal with this commit. 2022-10-12 Tom de Vries [gdb/contrib] Use OBJCOPY everywhere in cc-with-tweaks.sh I noticed that the $want_gnu_debuglink code in gdb/contrib/cc-with-tweaks.sh uses objcopy instead of $OBJCOPY. Fix this. Script checked with shellcheck, no new warnings added. Tested on x86_64-linux. 2022-10-12 Simon Marchi Re-apply "Pass PKG_CONFIG_PATH down from top-level Makefile" Commit 228cf97dd3c8 ("Merge configure.ac from gcc project") undid the change originally done in de83289ef32e ("Pass PKG_CONFIG_PATH down from top-level Makefile"). Re-apply it. Change-Id: I91138dfca41c43b05e53e445f62e4b27882536bf 2022-10-12 Simon Marchi gdb: rename target_read_auxv(target_ops *) to target_read_auxv_raw Having two overloads of target_read_auxv that don't have the same goals is confusing. Rename the one that reads from an explicit target_ops to target_read_auxv_raw. Also, it occured to me that the non-raw version could use the raw version, that reduces duplication a bit. Change-Id: I28e5f7cecbfcacd0174d4686efb3e4a23b4ad491 2022-10-12 GDB Administrator Automatic date update in version.in 2022-10-12 Alan Modra Re: Merge configure.ac from gcc project Also copy over config.acx.m4, and regenerate. 2022-10-11 Simon Marchi gdb: fix auxv caching There's a flaw in the interaction of the auxv caching and the fact that target_auxv_search allows reading auxv from an arbitrary target_ops (passed in as a parameter). This has consequences as explained in this thread: https://inbox.sourceware.org/gdb-patches/20220719144542.1478037-1-luis.machado@arm.com/ In summary, when loading an AArch64 core file with MTE support by passing the executable and core file names directly to GDB, we see the MTE info: $ ./gdb -nx --data-directory=data-directory -q aarch64-mte-gcore aarch64-mte-gcore.core ... Program terminated with signal SIGSEGV, Segmentation fault Memory tag violation while accessing address 0x0000ffff8ef5e000 Allocation tag 0x1 Logical tag 0x0. #0 0x0000aaaade3d0b4c in ?? () (gdb) But if we do it as two separate commands (file and core) we don't: $ ./gdb -nx --data-directory=data-directory -q -ex "file aarch64-mte-gcore" -ex "core aarch64-mte-gcore.core" ... Program terminated with signal SIGSEGV, Segmentation fault. #0 0x0000aaaade3d0b4c in ?? () (gdb) The problem with the latter is that auxv data gets improperly cached between the two commands. When executing the file command, auxv gets first queried here, when loading the executable: #0 target_auxv_search (ops=0x55555b842400 , match=0x9, valp=0x7fffffffc5d0) at /home/simark/src/binutils-gdb/gdb/auxv.c:383 #1 0x0000555557e576f2 in svr4_exec_displacement (displacementp=0x7fffffffc8c0) at /home/simark/src/binutils-gdb/gdb/solib-svr4.c:2482 #2 0x0000555557e594d1 in svr4_relocate_main_executable () at /home/simark/src/binutils-gdb/gdb/solib-svr4.c:2878 #3 0x0000555557e5989e in svr4_solib_create_inferior_hook (from_tty=1) at /home/simark/src/binutils-gdb/gdb/solib-svr4.c:2933 #4 0x0000555557e6e49f in solib_create_inferior_hook (from_tty=1) at /home/simark/src/binutils-gdb/gdb/solib.c:1253 #5 0x0000555557f33e29 in symbol_file_command (args=0x7fffffffe01c "aarch64-mte-gcore", from_tty=1) at /home/simark/src/binutils-gdb/gdb/symfile.c:1655 #6 0x00005555573319c3 in file_command (arg=0x7fffffffe01c "aarch64-mte-gcore", from_tty=1) at /home/simark/src/binutils-gdb/gdb/exec.c:555 #7 0x0000555556e47185 in do_simple_func (args=0x7fffffffe01c "aarch64-mte-gcore", from_tty=1, c=0x612000047740) at /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:95 #8 0x0000555556e551c9 in cmd_func (cmd=0x612000047740, args=0x7fffffffe01c "aarch64-mte-gcore", from_tty=1) at /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:2543 #9 0x00005555580e63fd in execute_command (p=0x7fffffffe02c "e", from_tty=1) at /home/simark/src/binutils-gdb/gdb/top.c:692 #10 0x0000555557771913 in catch_command_errors (command=0x5555580e55ad , arg=0x7fffffffe017 "file aarch64-mte-gcore", from_tty=1, do_bp_actions=true) at /home/simark/src/binutils-gdb/gdb/main.c:513 #11 0x0000555557771fba in execute_cmdargs (cmdarg_vec=0x7fffffffd570, file_type=CMDARG_FILE, cmd_type=CMDARG_COMMAND, ret=0x7fffffffd230) at /home/simark/src/binutils-gdb/gdb/main.c:608 #12 0x00005555577755ac in captured_main_1 (context=0x7fffffffda10) at /home/simark/src/binutils-gdb/gdb/main.c:1299 #13 0x0000555557775c2d in captured_main (data=0x7fffffffda10) at /home/simark/src/binutils-gdb/gdb/main.c:1320 #14 0x0000555557775cc2 in gdb_main (args=0x7fffffffda10) at /home/simark/src/binutils-gdb/gdb/main.c:1345 #15 0x00005555568bdcbe in main (argc=10, argv=0x7fffffffdba8) at /home/simark/src/binutils-gdb/gdb/gdb.c:32 Here, target_auxv_search is called on the inferior's target stack. The target stack only contains the exec target, so the query returns empty auxv data. This gets cached for that inferior in `auxv_inferior_data`. In its constructor (before it is pushed to the inferior's target stack), the core_target needs to identify the right target description from the core, and for that asks the gdbarch to read a target description from the core file. Because some implementations of gdbarch_core_read_description (such as AArch64's) need to read auxv data from the core in order to determine the right target description, the core_target passes a pointer to itself, allowing implementations to call target_auxv_search it. However, because we have previously cached (empty) auxv data for that inferior, target_auxv_search searched that cached (empty) auxv data, not auxv data read from the core. Remember that this data was obtained by reading auxv on the inferior's target stack, which only contained an exec target. The problem I see is that while target_auxv_search offers the flexibility of reading from an arbitrary (passed as an argument) target, the caching doesn't do the distinction of which target is being queried, and where the cached data came from. So, you could read auxv from a target A, it gets cached, then you try to read auxv from a target B, and it returns the cached data from target A. That sounds wrong. In our case, we expect to read different auxv data from the core target than what we have read from the target stack earlier, so it doesn't make sense to hit the cache in this case. To fix this, I propose splitting the code paths that read auxv data from an inferior's target stack and those that read from a passed-in target. The code path that reads from the target stack will keep caching, whereas the one that reads from a passed-in target won't. And since, searching in auxv data is independent from where this data came from, split the "read" part from the "search" part. From what I understand, auxv caching was introduced mostly to reduce latency on remote connections, when doing many queries. With the change I propose, only the queries done while constructing the core_target end up not using cached auxv data. This is fine, because there are just a handful of queries max, done at this point, and reading core files is local. The changes to auxv functions are: - Introduce 2 target_read_auxv functions. One reads from an explicit target_ops and doesn't do caching (to be used in gdbarch_core_read_description context). The other takes no argument, reads from the current inferior's target stack (it looks just like a standard target function wrapper) and does caching. The first target_read_auxv actually replaces get_auxv_inferior_data, since it became a trivial wrapper around it. - Change the existing target_auxv_search to not read auxv data from the target, but to accept it as a parameter (a gdb::byte_vector). This function doesn't care where the data came from, it just searches in it. It still needs to take a target_ops and gdbarch to know how to parse auxv entries. - Add a convenience target_auxv_search overload that reads auxv data from the inferior's target stack and searches in it. This overload is useful to replace the exist target_auxv_search calls that passed the `current_inferior ()->top_target ()` target and keep the call sites short. - Modify parse_auxv to accept a target_ops and gdbarch to use for parsing entries. Not strictly related to the rest of this change, but it seems like a good change in the context. Changes in architecture-specific files (tdep and nat): - In linux-tdep, linux_get_hwcap and linux_get_hwcap2 get split in two, similar to target_auxv_search. One version receives auxv data, target and arch as parameters. The other gets everything from the current inferior. The latter is for convenience, to avoid making call sites too ugly. - Call sites of linux_get_hwcap and linux_get_hwcap2 are adjusted to use either of the new versions. The call sites in gdbarch_core_read_description context explicitly read auxv data from the passed-in target and call the linux_get_hwcap{,2} function with parameters. Other call sites use the versions without parameters. - Same idea for arm_fbsd_read_description_auxv. - Call sites of target_auxv_search that passed `current_inferior ()->top_target ()` are changed to use the target_auxv_search overload that works in the current inferior. Reviewed-By: John Baldwin Reviewed-By: Luis Machado Change-Id: Ib775a220cf1e76443fb7da2fdff8fc631128fe66 2022-10-11 Tom de Vries [gdb/testsuite] Fix gdb.debuginfod/fetch_src_and_symbols.exp with native-gdbserver When running test-case gdb.debuginfod/fetch_src_and_symbols.exp with target board native-gdbserver, I get: ... Running gdb.debuginfod/fetch_src_and_symbols.exp ... ERROR: tcl error sourcing gdb.debuginfod/fetch_src_and_symbols.exp. ERROR: gdbserver does not support start without extended-remote while executing "error "gdbserver does not support $command without extended-remote"" (procedure "gdb_test_multiple" line 51) invoked from within "gdb_test_multiple $command $message {*}$opts $user_code" (procedure "gdb_test" line 56) invoked from within "gdb_test "start" "Temporary breakpoint.*"" ... Fix this by replacing gdb_test "start" with runto_main. Tested on x86_64-linux. 2022-10-11 Nick Clifton Re: Error: attempt to get value of unresolved symbol `L0' * symbols.c (S_GET_VALUE): If the unresolved symbol is the fake label provide a more helpful error message to the user. (S_GET_VALUE_WHERE): Like S_GET_VALUE, but includes a file/line number for error reporting purposes. * symbols.h (S_GET_VALUE_WHERE): Prototype. * write.c (fixup_segment): Use S_GET_VALUE_WHERE. 2022-10-11 Tsukasa OI sim: Initialize pbb_br_* by default On the files generated by sim/common/genmloop.sh, variables pbb_br_type and pbb_br_npc are declared uninitialized and passed to other functions in some cases. Despite that those are harmless, they will generate GCC warnings ("-Wmaybe-uninitialized"). This commit ensures that pbb_br_type and pbb_br_npc variables are initialized to a harmless value. 2022-10-11 Tsukasa OI sim: Check known getopt definition existence Clang generates a warning if there is a function declaration/definition with zero arguments. Such declarations/definitions without a prototype (an argument list) are deprecated forms of indefinite arguments ("-Wdeprecated-non-prototype"). On the default configuration, it causes a build failure (unless "--disable-werror" is specified). include/getopt.h defines some getopt function definitions but one of them has a form "extern int getopt ();". If this form is selected in include/getopt.h, Clang generates a warning and the build fails by default. In really old environments, this getopt definition with no arguments is necessary (because the definition may change between environments). However, this definition is now a cause of problems on modern environments. A good news is, this definition is not always selected (e.g. if used by binutils/*.c). This is because configuration scripts of binutils, gas, gprof and ld tries to find known definition of getopt function is used and defines HAVE_DECL_GETOPT macro. If this macro is defined when getopt.h is included, a good form of getopt is used and Clang won't generate warnings. This commit adds a modified portion of ld/configure.ac to find the known getopt definition. If we could find one (and we *will* in most modern environments), we don't need to rely on the deprecated definition. 2022-10-11 Tsukasa OI Andrew Burgess sim: Suppress non-literal printf warning Clang generates a warning if the format string of a printf-like function is not a literal ("-Wformat-nonliteral"). On the default configuration, it causes a build failure (unless "--disable-werror" is specified). To avoid this warning, this commit now uses vsnprintf to format error message and pass the message to sim_engine_abort function with another printf-style formatting. This patch is mostly authored by Andrew Burgess and slightly modified by Tsukasa OI. 2022-10-11 Tsukasa OI sim: Make WITH_{TRACE,PROFILE}-based macros bool Clang generates a warning if there is an ambiguous expression (possibly a bitwise operation (& or |), but a logical operator (&& or ||) is used; "-Wconstant-logical-operand"). On the default configuration, it causes a build failure (unless "--disable-werror" is specified). This is caused by predicate macros that use the form (base_variable & flag). Clang considers them as regular integer values (not boolean) and generates that warning. This commit makes Clang think those predicate macros to be boolean. 2022-10-11 Tsukasa OI sim: Remove self-assignments Clang generates a warning if there is a redundant self-assignment ("-Wself-assign"). On the default configuration, it causes a build failure (unless "--disable-werror" is specified). This commit removes redundant self-assignments from two files. 2022-10-11 Tsukasa OI sim/rl78: Add ATTRIBUTE_PRINTF Clang generates a warning if the format string of a printf-like function is not a literal ("-Wformat-nonliteral"). On the default configuration, it causes a build failure (unless "--disable-werror" is specified). To avoid warnings on the printf-like wrapper, it requires proper __attribute__((format)) and we have ATTRIBUTE_PRINTF macro for this reason. This commit adds ATTRIBUTE_PRINTF to the printf-like functions. 2022-10-11 Tsukasa OI sim/ppc: Add ATTRIBUTE_PRINTF Clang generates a warning if the format string of a printf-like function is not a literal ("-Wformat-nonliteral"). On the default configuration, it causes a build failure (unless "--disable-werror" is specified). To avoid warnings on the printf-like wrapper, it requires proper __attribute__((format)) and we have ATTRIBUTE_PRINTF macro for this reason. This commit adds ATTRIBUTE_PRINTF to the printf-like functions. For the error function defined in sim_calls.c, the ATTRIBUTE_NORETURN has been moved to the function declaration. 2022-10-11 Tsukasa OI sim/m68hc11: Add ATTRIBUTE_PRINTF Clang generates a warning if the format string of a printf-like function is not a literal ("-Wformat-nonliteral"). On the default configuration, it causes a build failure (unless "--disable-werror" is specified). To avoid warnings on the printf-like wrapper, it requires proper __attribute__((format)) and we have ATTRIBUTE_PRINTF macro for this reason. This commit adds ATTRIBUTE_PRINTF to a printf-like function. 2022-10-11 Tsukasa OI sim/m32c: Add ATTRIBUTE_PRINTF Clang generates a warning if the format string of a printf-like function is not a literal ("-Wformat-nonliteral"). On the default configuration, it causes a build failure (unless "--disable-werror" is specified). To avoid warnings on the printf-like wrapper, it requires proper __attribute__((format)) and we have ATTRIBUTE_PRINTF macro for this reason. This commit adds ATTRIBUTE_PRINTF to the printf-like functions. 2022-10-11 Tsukasa OI sim/erc32: Add ATTRIBUTE_PRINTF Clang generates a warning if the format string of a printf-like function is not a literal ("-Wformat-nonliteral"). On the default configuration, it causes a build failure (unless "--disable-werror" is specified). To avoid warnings on the printf-like wrapper, it requires proper __attribute__((format)) and we have ATTRIBUTE_PRINTF macro for this reason. This commit adds ATTRIBUTE_PRINTF to the printf-like functions. 2022-10-11 Tsukasa OI sim/cris: Add ATTRIBUTE_PRINTF Clang generates a warning if the format string of a printf-like function is not a literal ("-Wformat-nonliteral"). On the default configuration, it causes a build failure (unless "--disable-werror" is specified). To avoid warnings on the printf-like wrapper, it requires proper __attribute__((format)) and we have ATTRIBUTE_PRINTF macro for this reason. This commit adds ATTRIBUTE_PRINTF to a printf-like function. 2022-10-11 Tsukasa OI sim/common: Add ATTRIBUTE_PRINTF Clang generates a warning if the format string of a printf-like function is not a literal ("-Wformat-nonliteral"). On the default configuration, it causes a build failure (unless "--disable-werror" is specified). To avoid warnings on the printf-like wrapper, it requires proper __attribute__((format)) and we have ATTRIBUTE_PRINTF macro for this reason. This commit adds ATTRIBUTE_PRINTF to a printf-like function. 2022-10-11 Martin Liska fix compressed_debug_section_names definition for "zlib" bfd/ChangeLog: * libbfd.c: Set COMPRESS_DEBUG_GABI_ZLIB for "zlib" value. 2022-10-11 Martin Liska add --enable-default-compressed-debug-sections-algorithm configure option ChangeLog: * configure.ac: Add --enable-default-compressed-debug-sections-algorithm. * configure: Regenerate. gas/ChangeLog: * NEWS: Document the new option. * as.c (flag_compress_debug): Set default algorithm based on the configure option. * configure.ac: Add --enable-default-compressed-debug-sections-algorithm. * configure: Regenerate. * config.in: Likewise. ld/ChangeLog: * NEWS: Document the new option. * configure.ac: Add --enable-default-compressed-debug-sections-algorithm. * configure: Regenerate. * config.in: Likewise. * ldmain.c: Set default algorithm based on the configure option. 2022-10-11 Martin Liska refactor usage of compressed_debug_section_type bfd/ChangeLog: * bfd-in.h (bfd_hash_set_default_size): Add COMPRESS_UNKNOWN enum value. (struct compressed_type_tuple): New. * bfd-in2.h (bfd_hash_set_default_size): Regenerate. (struct compressed_type_tuple): Likewise. * libbfd.c (ARRAY_SIZE): New macro. (bfd_get_compression_algorithm): New function. (bfd_get_compression_algorithm_name): Likewise. gas/ChangeLog: * as.c: Do not special-case, use the new functions. ld/ChangeLog: * emultempl/elf.em: Do not special-case, use the new functions. * lexsup.c (elf_static_list_options): Likewise. 2022-10-11 Tsukasa OI sim/riscv: fix multiply instructions on simulator After this commit: commit 0938b032daa52129b4215d8e0eedb6c9804f5280 Date: Wed Feb 2 10:06:15 2022 +0900 RISC-V: Add 'Zmmul' extension in assembler. some instructions in the RISC-V simulator stopped working as a new instruction class 'INSN_CLASS_ZMMUL' was added, and some existing instructions were moved into this class. The simulator doesn't currently handle this instruction class, and so the instructions will now cause an illegal instruction trap. This commit adds support for INSN_CLASS_ZMMUL, and adds a test that ensures the affected instructions can be executed by the simulator. Reviewed-by: Palmer Dabbelt Reviewed-by: Andrew Burgess 2022-10-11 Nick Clifton Error: attempt to get value of unresolved symbol `L0' * symbols.c (S_GET_VALUE): If the unresolved symbol is the fake label provide a more helpful error message to the user. 2022-10-11 Tsukasa OI sim/moxie: add custom directory stamp rule Because sim/moxie/moxie-gdb.dtb is neither a program nor a library, automake does not generate dirstamp file ($builddir/sim/moxie/.dirstamp) for it. When maintainer mode is enabled, it tries to rebuild sim/moxie/moxie-gdb.dtb but fails because there's no rules for automake-generated dirstamp file which moxie-gdb.dtb depends. This commit adds its own rule for the directory stamp (modified copy of the automake output) and adds the directory stamp file to DISTCLEANFILES to mimic automake-generated behavior (although "make distclean" does not work when maintainer mode is enabled). 2022-10-11 Bruno Larsen gdb/testsuite: Fix formatting of python script The python black formatter was complaining about formatting on the script gdb.python/pretty-print-call-by-hand.py. This commit changed the offending lines to make the formatter happy. 2022-10-11 Tom de Vries [gdb/testsuite] Fix prompt parsing in capture_command_output I noticed in capture_command_output that the output of a single command is matched using two gdb_test_multiples: - the first one matching the echoed command and skipping an optional prefix, - the second one matching the output and the prompt. This is error-prone, because the first gdb_test_multiple has implicit clauses which may consume the prompt. The problem is easy to spot with an example. First consider: ... set output [capture_command_output "print 1" "\\\$1 = "] gdb_assert { [string equal $output "1"] } ... for which we get: ... PASS: [string equal $output "1"] ... If we change the prefix string to a no-match, say "1 = ", and update the output string match accordingly, we get instead: ... FAIL: capture_command_output for print 1 FAIL: [string equal $output "\$1 = 1"] ... The first FAIL is produced by the first gdb_test_multiple, consuming the prompt. The second gdb_test_multiple then silently times out waiting for another prompt, after which the second FAIL is produced. Note that the timeout is silent because the gdb_test_multiple is called with an empty message argument. The second FAIL is because capture_command_output returns "", given that all the command output was consumed by the first gdb_test_multiple. Fix this by rewriting capture_command_output to use only a single gdb_test_multiple. Tested on x86_64-linux. 2022-10-11 Vladimir Mezentsev gprofng: no need to build version.texi gprofng/ChangeLog 2022-10-10 Vladimir Mezentsev PR gprofng/29465 PR gprofng/29667 * doc/Makefile.am: No need to build version.texi. * doc/Makefile.in: Rebuild. 2022-10-11 Vladimir Mezentsev gprofng: use the --libdir path to find libraries gprofng/ChangeLog 2022-10-10 Vladimir Mezentsev PR gprofng/29663 * src/Makefile.am: Add -DLIBDIR to CPPFLAGS. * src/Makefile.in: Rebuild. * src/envsets.cc (putenv_libcollector_ld_misc): Use LIBDIR to find the gprofng libraries. 2022-10-11 Vladimir Mezentsev gprofng: run tests without installation gprofng/ChangeLog 2022-10-10 Vladimir Mezentsev PR gprofng/29107 * testsuite/config/default.exp: Set up environment to run gprofng tests without installation. * testsuite/lib/Makefile.skel: Likewise. * testsuite/lib/display-lib.exp: Likewise. 2022-10-11 Simon Marchi gdb/testsuite: fix race in gdb.base/async-shell.exp I see some random failures in this test: FAIL: gdb.base/async-shell.exp: run & (timeout) It can be reliably reproduced on a recent enough GNU/Linux with this change: diff --git a/gdb/testsuite/lib/gdb.exp b/gdb/testsuite/lib/gdb.exp index 44cc28b30051..2a3c8253ba5a 100644 --- a/gdb/testsuite/lib/gdb.exp +++ b/gdb/testsuite/lib/gdb.exp @@ -1301,6 +1301,7 @@ proc gdb_test_multiple { command message args } { } set gdb_test_name "$message" + sleep 2 set result 0 set code [catch {gdb_expect $code} string] "recent enough" means a system where libpthread.so was merged with libc.so, so at least glibc 2.34. The problem is that the `run &` command prints some things after the prompt: (gdb) [Thread debugging using libthread_db enabled] Using host libthread_db library "/usr/lib/../lib/libthread_db.so.1". If expect is quick enough, it will consume only up to the prompt. But if it is slow enough, it will consume those messages at the same time as the prompt, in which case the gdb_test used for "run &" won't match. By default, the prompt used by gdb_test uses a `$` to anchor the match at the end of the buffer. If there's anything following the prompt, it won't match. The diff above adds a delay between sending the command and consuming the output, giving GDB more time to output the messages, giving a good chance that expect consumes them at the same time as the prompt. This is normally handled by using gdb_test_multiple and specifying a pattern that ends with "$gdb_prompt", but not a trailing $. I think this is common enough that it deserves its own gdb_test option. Therefore, add the -no-anchor-prompt option to gdb_test, and gdb_test_no_output for completeness. Use it in gdb.base/async-shell.exp. Change-Id: I9051d8800d1c10a2e95db1a575991f7723492f1b Approved-By: Tom de Vries 2022-10-11 GDB Administrator Automatic date update in version.in 2022-10-10 Tom Tromey Fix a latent bug in print_wchar print_wchar keeps track of when escape sequences are emitted, to force an escape sequence if needed by a subsequent character. For example for the string concatenation "\0" "1", gdb will print "\000\061" -- because printing "\0001" might be confusing. However, this code has two errors. First, this logic is not needed for octal escapes, because there is a length limit of 3 for octal escapes, and gdb always prints these with "%.3o". Second, though, this *is* needed for hex escapes, because those do not have a length limit. This patch fixes these problems and adds the appropriate tests. 2022-10-10 Tom Tromey Don't use wchar_printable in print_wchar print_wchar uses wchar_printable, but this isn't needed -- all the relevant cases are already handled by the 'switch'. This changes the code to use gdb_iswprint, and removes a somewhat confusing comment related to this code. Remove c_printstr This renames c_printstr, removing a layer of indirection. Remove c_emit_char This renames c_emit_char, removing a layer of indirection. Boolify need_escape in generic_emit_char This changes 'need_escape' in generic_emit_char to be of type bool, rather than int. 2022-10-10 Tom Tromey Andrew Burgess Fix latent quote char bug in generic_printstr generic_printstr prints an empty string like: fputs_filtered ("\"\"", stream); However, this seems wrong to me if the quote character is something other than double quote. This patch fixes this latent bug. Thanks to Andrew for the test case. 2022-10-10 Tom Tromey Fix the guile build The frame_info_ptr patches broke the build with Guile. This patch fixes the problem. In mos cases I chose to preserve the use of frame_info_ptr, at least where I could be sure that the object lifetime did not interact with Guile's longjmp-based exception scheme. Tested on x86-64 Fedora 34. 2022-10-10 Tom de Vries [gdb/testsuite] Detect trailing ^C/^D in command Detect a trailing ^C/^D in the command argument of gdb_test_multiple, and error out. Tested on x86_64-linux. 2022-10-10 Tom de Vries [gdb/testsuite] Fix error message for cmd with trailing newline I noticed that the error message in gdb_test_multiple about trailing newline in a command does not mention the offending command, nor the word command: ... if [string match "*\[\r\n\]" $command] { error "Invalid trailing newline in \"$message\" test" } ... Fix this by using instead: ... error "Invalid trailing newline in \"$command\" command" ... Also add a test-case to trigger this: gdb.testsuite/gdb-test.exp. Tested on x86_64-linux. 2022-10-10 Andrew Burgess gdb: include the base address in in-memory bfd filenames The struct target_buffer (in gdb_bfd.c) is used to hold information about an in-memory BFD object created by GDB. For now this mechanism is used by GDB when loading information about JIT symfiles. This commit updates target_buffer (in gdb_bfd.c) to be more C++ like, and, at the same time, adds the base address of the symfile into the BFD filename. Right now, every in-memory BFD is given the filename "". This filename is visible in things like 'maint info symtabs' and 'maint info line-table'. If there are multiple in-memory BFD objects then it can be hard to match keep track if which BFD is which. This commit changes the name to be "" where ADDRESS is replaced with the base address for where the in-memory symbol file was read from. As an example of how this is useful, here's the output of 'maint info jit' showing a single loaded JIT symfile: (gdb) maintenance info jit jit_code_entry address symfile address symfile size 0x00000000004056b0 0x0000000007000000 17320 And here's part of the output from 'maint info symtabs': (gdb) maintenance info symtabs ...snip... { objfile ((struct objfile *) 0x5258250) { ((struct compunit_symtab *) 0x4f0afb0) debugformat DWARF 4 producer GNU C17 9.3.1 20200408 (Red Hat 9.3.1-2) -mtune=generic -march=x86-64 -g -fno-stack-protector -fpic name jit-elf-solib.c dirname /tmp/binutils-gdb/build/gdb/testsuite blockvector ((struct blockvector *) 0x5477850) user ((struct compunit_symtab *) (null)) { symtab /tmp/binutils-gdb/build/gdb/testsuite/../../../src/gdb/testsuite/gdb.base/jit-elf-solib.c ((struct symtab *) 0x4f0b030) fullname (null) linetable ((struct linetable *) 0x5477880) } } } I've added a new test that checks the new in-memory file names are generated correctly, and also checks that the in-memory JIT files can be dumped back out using 'dump binary memory'. 2022-10-10 Andrew Burgess gdb: remove filename arg from gdb_bfd_open_from_target_memory The filename argument to gdb_bfd_open_from_target_memory was never used; this argument had a default value of nullptr, and the only call to this function, in jit.c, relied on the default value. In the next commit I'm going to make some changes to the gdb_bfd_open_from_target_memory function, and, though I could take account of a filename parameter, it seems pointless to maintain an unused argument. This commit removes the filename argument. There should be no user visible changes after this commit. 2022-10-10 Andrew Burgess gdb: add infcall specific debugging Add two new commands: set debug infcall on|off show debug infcall These enable some new debugging related to when GDB makes inferior function calls. I've added some basic debugging for what I think are the major steps in the inferior function call process, but I'm sure we might want to add more later. 2022-10-10 Andrew Burgess gdb: extra debug output in thread.c Add some extra 'threads' debug in a couple of places in thread.c. I've also added an additional gdb_assert in one case. gdb: improve infrun_debug_show_threads output This commit switches to use INFRUN_SCOPED_DEBUG_START_END in the infrun_debug_show_threads function, which means the output will get an extra level of indentation, this looks a little nicer I think. 2022-10-10 Nick Clifton Add ability to create reproducible source tarballs. * src-release.sh: Add "-r " option to create reproducible tarballs based upon a fixed timestamp of . * binutils/README-how-to-make-a-release: Add a line showing how to use -r when creating a binutils release. 2022-10-10 Bruno Larsen gdb/frame: Add reinflation method for frame_info_ptr Currently, despite having a smart pointer for frame_infos, GDB may attempt to use an invalidated frame_info_ptr, which would cause internal errors to happen. One such example has been documented as PR python/28856, that happened when printing frame arguments calls an inferior function. To avoid failures, the smart wrapper was changed to also cache the frame id, so the pointer can be reinflated later. For this to work, the frame-id stuff had to be moved to their own .h file, which is included by frame-info.h. Frame_id caching is done explicitly using the prepare_reinflate method. Caching is done manually so that only the pointers that need to be saved will be, and reinflating has to be done manually using the reinflate method because the get method and the -> operator must not change the internals of the class. Finally, attempting to reinflate when the pointer is being invalidated causes the following assertion errors: check_ptrace_stopped_lwp_gone: assertion `lp->stopped` failed. get_frame_pc: Assertion `frame->next != NULL` failed. As for performance concerns, my personal testing with `time make chec-perf GDB_PERFTEST_MODE=run` showed an actual reduction of around 10% of time running. This commit also adds a testcase that exercises the python/28856 bug with 7 different triggers, run, continue, step, backtrace, finish, up and down. Some of them can seem to be testing the same thing twice, but since this test relies on stale pointers, there is always a chance that GDB got lucky when testing, so better to test extra. Regression tested on x86_64, using both gcc and clang. Approved-by: Tom Tomey 2022-10-10 Tom Tromey Change GDB to use frame_info_ptr This changes GDB to use frame_info_ptr instead of frame_info * The substitution was done with multiple sequential `sed` commands: sed 's/^struct frame_info;/class frame_info_ptr;/' sed 's/struct frame_info \*/frame_info_ptr /g' - which left some issues in a few files, that were manually fixed. sed 's/\ Approved-by: Tom Tomey 2022-10-10 Tom Tromey Introduce frame_info_ptr smart pointer class This adds frame_info_ptr, a smart pointer class. Every instance of the class is kept on an intrusive list. When reinit_frame_cache is called, the list is traversed and all the pointers are invalidated. This should help catch the typical GDB bug of keeping a frame_info pointer alive where a frame ID was needed instead. Co-Authored-By: Bruno Larsen Approved-by: Tom Tomey 2022-10-10 Tom Tromey Remove frame_id_eq This replaces frame_id_eq with operator== and operator!=. I wrote this for a version of this series that I later abandoned; but since it simplifies the code, I left this patch in. Approved-by: Tom Tomey 2022-10-10 Andrew Burgess gdb/testsuite: use 'end' at the end of python blocks Within the testsuite, use the keyword 'end' to terminate blocks of Python code being sent to GDB, rather than sending \004. I could only find three instances of this, all in tests that I originally wrote. I have no memory of there being any special reason why I used \004 instead of 'end' - I assume I copied this from somewhere else that has since changed. Non of the tests being changed here are specifically about whether \004 can be used to terminate a Python block, so I think switching to the more standard 'end' keyword is the right choice. 2022-10-10 Simon Marchi gdbsupport: re-generate configure I get this diff when re-generating configure, probably leftover from 67d1991b785 ("egrep in binutils"). Change-Id: I759c88c2bad648736d33ff98089db45c9b686356 2022-10-10 Alan Modra Merge configure.ac from gcc project To merge with gcc's copy of configure.ac we need to revert changes to configure.ac in the following gcc commits: dc832fb39fc0 2022-08-25 fc259b522c0f 2022-06-25 Then reapply configure.ac changes in binutils from these binutils commits: 50ad1254d503 2021-01-09 bb368aad297f 2022-03-11 e5f2f7d901ee 2022-07-26 2cac01e3ffff 2022-09-26 Plus copy over gcc's config/ax_cxx_compile_stdcxx.m4, then regenerate configure. 2022-10-10 GDB Administrator Automatic date update in version.in 2022-10-09 GDB Administrator Automatic date update in version.in 2022-10-08 Tom Tromey Merge both implementations of debug_names::insert The class debug_names has two 'insert' overloads, but only one of them is ever called externally, and it simply forwards to the other implementation. It seems cleaner to me to have a single method, so this patch merges the two. 2022-10-08 Tom de Vries [gdb/testsuite] Fix silent fail in gdb.server/connect-with-no-symbol-file.exp With native and target boards native-gdbserver, remote-gdbserver-on-localhost and remote-stdio-gdbserver I have for gdb.server/connect-with-no-symbol-file.exp: ... # of expected passes 8 ... but with native-extended-gdbserver I have instead: ... # of expected passes 8 # of unexpected failures 4 ... The extra FAILs are of the form: ... (gdb) detach^M Detaching from pid process 28985^M [Inferior 1 (process 28985) detached]^M (gdb) FAIL: gdb.server/connect-with-no-symbol-file.exp: sysroot=: \ action=permission: connection to GDBserver succeeded ... and are due to the fact that the actual gdb output doesn't match the regexp: ... gdb_test "detach" \ ".*Detaching from program: , process.*Ending remote debugging.*" \ "connection to GDBserver succeeded" ... With native, the actual gdb output is: ... (gdb) detach^M Detaching from pid process 29657^M Ending remote debugging.^M [Inferior 1 (process 29657) detached]^M (gdb) Remote debugging from host ::1, port 51028^M ... and because the regexp doesn't match, it triggers an implicit clause for "Ending remote debugging" in gdb_test_multiple, which has the consequence that the FAIL is silent. Fix: - the regexp by making it less strict - the silent fail by rewriting into a gdb_test_multiple, and adding an explicit fail clause. Tested on x86_64-linux, using native and aforementioned target boards. 2022-10-08 GDB Administrator Automatic date update in version.in 2022-10-07 Lancelot SIX gdb/testsuite: fix gdb.threads/linux-dp.exp regex On ubuntu 22.04 with the libc6-dbg package installed, I have the following failure: where #0 print_philosopher (n=3, left=33 '!', right=33 '!') at .../gdb/testsuite/gdb.threads/linux-dp.c:105 #1 0x000055555555576a in philosopher (data=0x55555555937c) at .../gdb/testsuite/gdb.threads/linux-dp.c:148 #2 0x00007ffff7e11b43 in start_thread (arg=) at ./nptl/pthread_create.c:442 #3 0x00007ffff7ea3a00 in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 (gdb) FAIL: gdb.threads/linux-dp.exp: first thread-specific breakpoint hit The regex for this test accounts for different situations (with / without debug symbol) but assumes that if debug info is present the backtrace shows execution under pthread_create. However, for the implementation under test, we are under start_thread. Update the regex to accept start_thread. Tested on Ubuntu-22.04 x86_64 with and without libc6-dbg debug symbols available. Change-Id: I1e1536279890bca2cd07f038e026b41e46af44e0 2022-10-07 Tom de Vries [gdb/testsuite] Handle host cleanfiles When running test-case gdb.server/abspath.exp with host board local-remote-host-notty, I get: ... $ git sti ... deleted: gdb/testsuite/gdb.xml/trivial.xml ... This happens as follows. The test-case calls skip_gdbserver_test, which calls gdb_skip_xml_test, which does: ... set xml_file [gdb_remote_download host "${srcdir}/gdb.xml/trivial.xml"] ... Then proc gdb_remote_download appends $xml_file (which for this particular host board happens to be ${srcdir}/gdb.xml/trivial.xml) to cleanfiles, which ends up being handled in gdb_finish by: ... eval remote_file target delete $cleanfiles ... The problem is that a host file is deleted using target delete. Fix this by splitting cleanfiles up in cleanfiles_target and cleanfiles_host. Tested on x86_64-linux. 2022-10-07 Tom de Vries [gdb/testsuite] Remove unnecessary warning in gdb.base/default.exp When running test-case gdb.base/default.exp with target board native-gdbserver, we get: ... WARNING: Skipping backtrace and break tests because of GDB stub. ... There's no need for such a warning, so remove it. Tested on x86_64-linux with native and target board native-gdbserver. 2022-10-07 Tom de Vries [gdb/testsuite] Fix have_mpx with remote-gdbserver-on-localhost With target board remote-gdbserver-on-localhost and gdb.arch/i386-mpx-call.exp I run into: ... FAIL: gdb.arch/i386-mpx-call.exp: upper_bnd0: continue to a bnd violation ... This is due to the have_mpx test which should return 0, but instead returns 1 because the captured output: ... No MPX support No MPX support ... does not match the used regexp: ... set status [expr ($status == 0) \ && ![regexp "^No MPX support\r\n" $output]] ... which does match the captured output with native: ... No MPX support^M No MPX support^M ... Fix this by making the \r in the regexp optional. Tested on x86_64-linux, with native and target board remote-gdbserver-on-localhost. 2022-10-07 Tom de Vries [gdb/testsuite] Fix DUPLICATEs with remote-gdbserver-on-localhost Fix some DUPLICATEs that we run into with target board remote-gdbserver-on-localhost, by using test_with_prefix. Tested on x86_64-linux, with native and target board remote-gdbserver-on-localhost. 2022-10-07 Tom de Vries [gdb/testsuite] Fix path in test name in gdb_load_shlib When running test-case gdb.server/solib-list.exp with target board remote-gdbserver-on-localhost, I run into: ... (gdb) set solib-search-path $outputs/gdb.server/solib-list^M (gdb) PASS: gdb.server/solib-list.exp: non-stop 0: \ set solib-search-path $outputs/gdb.server/solib-list PATH: gdb.server/solib-list.exp: non-stop 0: \ set solib-search-path $outputs/gdb.server/solib-list ... This is due to this code in gdb_load_shlib: ... gdb_test "set solib-search-path [file dirname $file]" "" "" ... Fix this by setting an explicit test name. Tested on x86_64-linux, with native and target boards remote-gdbserver-on-localhost, native-gdbserver and native-extended-gdbserver. 2022-10-07 Alan Modra PR29653, objcopy/strip: fuzzed small input file induces large output file _bfd_check_format functions should not print errors or warnings if they return NULL. A NULL return means the particular target under test does not match, so there isn't any reason to make a complaint about the target. In fact there isn't a good reason to warn even if the target matches, except via the _bfd_per_xvec_warn mechanism; Some other target might be a better match. This patch tidies pe_bfd_object_p with the above in mind, and restricts the PE optional header SectionAlignment and FileAlignment fields somewhat. I chose to warn on nonsense values rather than refusing to match. Refusing to match would be OK too. PR 29653 * peXXigen.c (_bfd_XXi_swap_aouthdr_in): Don't emit error about invalid NumberOfRvaAndSizes here. Limit loop copying data directory to IMAGE_NUMBEROF_DIRECTORY_ENTRIES. * peicode.h (pe_bfd_object_p): Don't clear and test bfd_error around bfd_coff_swap_aouthdr_in. Warn on invalid SectionAlignment, FileAlignment and NumberOfRvaAndSizes. Don't return NULL on invalid NumberOfRvaAndSizes. 2022-10-07 GDB Administrator Automatic date update in version.in 2022-10-06 Tom Tromey Fix indentation in riscv-tdep.c This just fixes some indentation in riscv-tdep.c. 2022-10-06 Torbjörn SVENSSON gdb/arm: Handle lazy FPU state preservation Read LSPEN, ASPEN and LSPACT bits from FPCCR and use them together with FPCAR to identify if lazy FPU state preservation is active for the current frame. See "Lazy context save of FP state", in B1.5.7, also ARM AN298, supported by Cortex-M4F architecture for details on lazy FPU register stacking. The same conditions are valid for other Cortex-M cores with FPU. This patch has been verified on a STM32F4-Discovery board by: a) writing a non-zero value (lets use 0x1122334455667788 as an example) to all the D-registers in the main function b) configured the SysTick to fire c) in the SysTick_Handler, write some other value (lets use 0x0022446688aaccee as an example) to one of the D-registers (D0 as an example) and then do "SVC #0" d) in the SVC_Handler, write some other value (lets use 0x0099aabbccddeeff) to one of the D-registers (D0 as an example) In GDB, suspend the execution in the SVC_Handler function and compare the value of the D-registers for the SVC_handler frame and the SysTick_Handler frame. With the patch, the value of the modified D-register (D0) should be the new value (0x009..eff) on the SVC_Handler frame, and the intermediate value (0x002..cee) for the SysTick_Handler frame. Now compare the D-register value for the SysTick_Handler frame and the main frame. The main frame should have the initial value (0x112..788). 2022-10-06 Tom de Vries [gdb/symtab] Factor out have_complaint After committing 8ba677d3560 ("[gdb/symtab] Don't complain about function decls") I noticed that quite a bit of code in read_func_scope is used to decide whether to issue the "cannot get low and high bounds for subprogram DIE at $hex" complaint, which executes unnecessarily if we have the default "set complaints 0". Fix this by (NFC): - factoring out new static function have_complaint from macro complaint, and - using it to wrap the relevant code in read_func_scope. Tested on x86_64-linux. 2022-10-06 Andrew Burgess gdb: add missing nullptr checks in bpstat_check_breakpoint_conditions Add a couple of missing nullptr checks in the function bpstat_check_breakpoint_conditions. No user visible change after this commit. 2022-10-06 Andrew Burgess gdb: more infrun debug from breakpoint.c This commit adds additional infrun debug from the breakpoint.c file. The new debug output all relates to breakpoint condition evaluation. There is already some infrun debug emitted from the breakpoint.c file, so hopefully, adding more will not be contentious. I think the functions being instrumented make sense as part of the infrun process, the inferior stops, evaluates the condition, and then either stops or continues. This new debug gives more insight into that process. I had to make the bp_location* argument to find_loc_num_by_location const, and add a declaration for find_loc_num_by_location. There should be no user visible changes unless they turn on debug output. 2022-10-06 Andrew Burgess gdb: add some additional debug in mark_async_event_handler Extend the existing debug printf call to include the previous state of the async_event_handler object. 2022-10-06 Tsukasa OI RISC-V: Print XTheadMemPair literal as "immediate" The operand type "Xl(...)" denotes that (...) is a literal. Specifically, they are intended to be a constant immediate value. This commit prints "Xl(...)" operand with dis_style_immediate style, not dis_style_text. opcodes/ChangeLog: * riscv-dis.c (print_insn_args): Use dis_style_immediate on the constant literal of the "Xl..." operand. 2022-10-06 Tsukasa OI RISC-V: Fix T-Head immediate types on printing This commit fixes two minor typing-related issues for T-Head immediate operands. 1. A signed type must be specified when printing with %i. 2. unsigned/signed int is not portable enough for max 32-bit immediates. Instead, we should use unsigned/signed long. The format string is changed accordingly. opcodes/ChangeLog: * riscv-dis.c (print_insn_args): Fix T-Head immediate types on printing. 2022-10-06 Tsukasa OI RISC-V: Print comma and tabs as the "text" style On the RISC-V disassembler, some separators have non-text style when printed with another word with another style. This commit splits those, making sure that those comma and tabs are printed with the "text" style. opcodes/ChangeLog: * riscv-dis.c (print_insn_args): Split and print the comma as text. (riscv_disassemble_insn): Split and print tabs as text. (riscv_disassemble_data): Likewise. 2022-10-06 Tsukasa OI RISC-V: Optimize riscv_disassemble_data printf This commit makes types of printf arguments on riscv_disassemble_data as small as possible (as long as we can preserve the portability) to reduce the cost of printf (especially on 32-bit host). opcodes/ChangeLog: * riscv-dis.c (riscv_disassemble_data): Use smallest possible type to printing data. 2022-10-06 Tsukasa OI RISC-V: Fix printf argument types corresponding %x "%x" format specifier requires unsigned type, not int. This commit fixes this issue on the RISC-V disassembler. opcodes/ChangeLog: * riscv-dis.c (print_insn_args): Fix printf argument types where the format specifier is "%x". 2022-10-06 Tsukasa OI RISC-V: Fix immediates to have "immediate" style This commit fixes certain print calls on immediate operands to have dis_style_immediate. opcodes/ChangeLog: * riscv-dis.c (print_insn_args): Fix immediates to have "immediate" style. (riscv_disassemble_data): Likewise. 2022-10-06 GDB Administrator Automatic date update in version.in 2022-10-06 Alan Modra Re: bfd BLD-POTFILES.in dependencies Removing $BLD_POTFILES from BFD-POTFILES.in was correct, but left a hole in dependencies. make[4]: Entering directory '/home/alan/build/gas/all/bfd/po' make[4]: *** No rule to make target '../elf32-aarch64.c', needed by '/home/alan/src/binutils-gdb/bfd/po/bfd.pot'. Stop. * Makefile.am (BUILT_SOURCES): Add BUILD_CFILES. * Makefile.in: Regenerate. 2022-10-05 Jan Beulich x86/gas: support quoted address scale factor in AT&T syntax An earlier attempt (e68c3d59acd0 ["x86: better respect quotes in parse_operands()"]) needed undoing (cc0f96357e0b ["x86: permit parenthesized expressions again as addressing scale factor"]) as far its effect here went. As indicated back then, the issue is the backwards scanning of the operand string to find the matching opening parenthesis. Switch to forward scanning, finding the last outermost unquoted opening parenthesis (which is the one matching the trailing closing one). Arm64: support CLEARBHB alias While the Arm v8 ARM (rev I-a) still doesn't mention this alias, it is (typically via a macro) already in use in kernels and alike. 2022-10-05 Alan Modra PR29647, objdump -S looping Fuzzed input with this in .debug_line [0x0000003b] Special opcode 115: advance Address by 8 to 0x401180 and Line by -2 to -1 PR 29647 * objdump.c (print_line): Don't decrement line number here.. (dump_lines): ..do so here instead, ensuring loop terminates. 2022-10-05 Alan Modra Re: stab nearest_line bfd_malloc_and_get_section It didn't take long for the fuzzers to avoid size checks in bfd_malloc_and_get_section. Plug this hole. * syms.c (_bfd_stab_section_find_nearest_line): Ignore fuzzed sections with no contents. 2022-10-05 Vladimir Mezentsev gprofng: fix build with --enable-pgo-build=lto gprofng/ChangeLog 2022-10-04 Vladimir Mezentsev PR gprofng/29579 * libcollector/dispatcher.c: Fix the symbol version in SYMVER_ATTRIBUTE. * libcollector/iotrace.c: Likewise. * libcollector/linetrace.c: Likewise. * libcollector/mmaptrace.c: Likewise. * libcollector/synctrace.c: Likewise. 2022-10-05 GDB Administrator Automatic date update in version.in 2022-10-04 Tom Tromey Remove decode_location_spec_default This removes decode_location_spec_default, inlining it into its sole caller. Regression tested on x86-64 Fedora 34. 2022-10-04 Palmer Dabbelt gas: NEWS: Mention the T-Head extensions that were recently added 2022-10-04 Tom de Vries [gdb/symtab] Don't complain about function decls [ Requires "[gdb/symtab] Don't complain about inlined functions" as submitted here ( https://sourceware.org/pipermail/gdb-patches/2022-September/191762.html ). ] With the test-case included in this patch, we get: ... (gdb) ptype main^M During symbol reading: cannot get low and high bounds for subprogram DIE \ at 0xc1^M type = int (void)^M (gdb) FAIL: gdb.dwarf2/anon-ns-fn.exp: ptype main without complaints ... The DIE causing the complaint is a function declaration: ... <2>: Abbrev Number: 3 (DW_TAG_subprogram) DW_AT_name : foo DW_AT_declaration : 1 ... which is referred to from the DIE representing the function definition: ... <1>: Abbrev Number: 7 (DW_TAG_subprogram) DW_AT_specification: <0xc1> DW_AT_low_pc : 0x4004c7 <101> DW_AT_high_pc : 0x7 ... which does contain the low and high bounds. Fix this by not complaining about function declarations. Tested on x86_64-linux. 2022-10-04 Tom de Vries [gdb/symtab] Don't complain about inlined functions With the test-case included in this patch, we get: ... (gdb) ptype main^M During symbol reading: cannot get low and high bounds for subprogram DIE \ at 0x113^M During symbol reading: cannot get low and high bounds for subprogram DIE \ at 0x11f^M type = int (void)^M (gdb) FAIL: gdb.dwarf2/inline.exp: ptype main ... The complaints are about foo, with DW_AT_inline == DW_INL_inlined: ... <1><11f>: Abbrev Number: 6 (DW_TAG_subprogram) <120> DW_AT_name : foo <126> DW_AT_prototyped : 1 <126> DW_AT_type : <0x10c> <12a> DW_AT_inline : 1 (inlined) ... and foo2, with DW_AT_inline == DW_INL_declared_inlined: ... <1><113>: Abbrev Number: 5 (DW_TAG_subprogram) <114> DW_AT_name : foo2 <11a> DW_AT_prototyped : 1 <11a> DW_AT_type : <0x10c> <11e> DW_AT_inline : 3 (declared as inline and inlined) ... Fix this by not complaining about inlined functions. Tested on x86_64-linux. 2022-10-04 Tsukasa OI gdb/riscv: Partial support for instructions up to 176-bit Because riscv_insn_length started to support instructions up to 176-bit, we need to increase buf size to 176-bit in size. Also, that would break an assumption in riscv_insn::decode so this commit fixes it, noting that instructions longer than 64-bit are not fully supported yet. 2022-10-04 Tsukasa OI RISC-V: Fix buffer overflow on print_insn_riscv Because riscv_insn_length started to support instructions up to 176-bit, we need to increase packet buffer size to 176-bit in size. include/ChangeLog: * opcode/riscv.h (RISCV_MAX_INSN_LEN): Max instruction length for use in buffer size. opcodes/ChangeLog: * riscv-dis.c (print_insn_riscv): Increase buffer size for max 176-bit length instructions. 2022-10-04 Nelson Chu RISC-V: Renamed INSN_CLASS for floating point in integer extensions. Just added suffix _INX for those INSN_CLASS should be enough to represent their fpr can be replaced by gpr. 2022-10-04 Nick Clifton Note that at least dejagnu version 1.5.3 is required in order to be ale to run the testsuites. * README-maintainer-mode: Add a minimum version of dejagnu requirement. 2022-10-04 Andrew Burgess opcodes/riscv: style csr names as registers While reviewing another patch I noticed that RISC-V CSR names are given the text style, not the register style. This patch fixes this mistake. 2022-10-04 Luis Machado [AArch64] Update FPSR/FPCR fields for FPU and SVE I noticed some missing flags/fields from FPSR and FPCR registers in both the FPU and SVE target descriptions. This patch adds those and makes the SVE versions of FPSR and FPCR use the proper flags/bitfields types. 2022-10-04 Alan Modra Support objcopy changing compression to or from zstd Commit 2cac01e3ffff lacked support for objcopy changing compression style. Add that support, which meant a rewrite of bfd_compress_section_contents. In the process I've fixed some memory leaks. * compress.c (bfd_is_section_compressed_info): Rename from bfd_is_section_compressed_with_header and add ch_type param to return compression header ch_type field. Update all callers. (decompress_section_contents): Remove buffer and size params. Rewrite. Update callers. (bfd_init_section_compress_status): Free contents on failure. (bfd_compress_section): Likewise. * elf.c (_bfd_elf_make_section_from_shdr): Support objcopy changing between any of the three compression schemes. Report "unable to compress/decompress" rather than "unable to initialize compress/decompress status" on compress/decompress failures. * bfd-in2.h: Regenerate. 2022-10-04 Alan Modra Re: compress .gnu.debuglto_.debug_* sections if requested Enable zlib-gnu compression for .gnu.debuglto_.debug_*. This differs from zlib-gnu for .debug_* where the name is changed to .zdebug_*. The name change isn't really needed. bfd/ * elf.c (elf_fake_sections): Replace "." with ".z" in debug section names only when name was ".d*", ie. ".debug_*". (_bfd_elf_assign_file_positions_for_non_load): Likewise. gas/ * write.c (compress_debug): Compress .gnu.debuglto_.debug_* for zlib-gnu too. Compress .gnu.linkonce.wi.*. 2022-10-04 Martin Liska compress .gnu.debuglto_.debug_* sections if requested Right now, when using LTO, the intermediate object files do contain debug info in sections starting with .gnu.debuglto_ prefix and are not compressed when --compress-debug-sections is used. It's a mistake and we can save quite some disk space. The following example comes from tramp3d when the corresponding LTO sections are compressed with zlib: $ bloaty tramp3d-v4-v2.o -- tramp3d-v4.o FILE SIZE VM SIZE -------------- -------------- +83% +10 [ = ] 0 [Unmapped] -68.0% -441 [ = ] 0 .gnu.debuglto_.debug_line -52.3% -759 [ = ] 0 .gnu.debuglto_.debug_line_str -62.4% -3.24Ki [ = ] 0 .gnu.debuglto_.debug_abbrev -64.8% -1.12Mi [ = ] 0 .gnu.debuglto_.debug_info -88.8% -4.58Mi [ = ] 0 .gnu.debuglto_.debug_str -27.7% -5.70Mi [ = ] 0 TOTAL bfd/ChangeLog: * elf.c (_bfd_elf_make_section_from_shdr): Compress all debug info sections. gas/ChangeLog: * write.c (compress_debug): Compress also ".gnu.debuglto_.debug_" if the compression algorithm is different from zlib-gnu. 2022-10-04 Jan Beulich RISC-V/gas: allow generating up to 176-bit instructions with .insn For the time being simply utilize O_big to avoid widening other fields, bypassing append_insn() etc. RISC-V/gas: don't open-code insn_length() Use the helper when it can be used. RISC-V/gas: drop stray call to install_insn() add_fixed_insn(), by calling move_insn(), already invokes install_insn(). RISC-V/gas: drop riscv_subsets static variable It's fully redundant with the subset_list member of riscv_rps_as. RISC-V: don't cast expressions' X_add_number to long in diagnostics There's no need for such workarounds anymore now that we use C99 uniformly. This addresses several testsuite failures encountered when (cross-)building on a 32-bit host. 2022-10-04 Potharla, Rupesh ignore DWARF debug information for -gsplit-dwarf with dwarf-5 Skip dwo_id for split dwarf. * dwarf2.c (parse_comp_unit): Skip DWO_id for DW_UT_skeleton. 2022-10-04 GDB Administrator Automatic date update in version.in 2022-10-03 Jan-Benedict Glaw Fix self-move warning check for GCC 13+ GCC 13 got the self-move warning (0abb78dda084a14b3d955757c6431fff71c263f3), but that warning is only checked for clang, resulting in: /usr/lib/gcc-snapshot/bin/g++ -x c++ -I. -I. -I./config -DLOCALEDIR="\"/tmp/gdb-m68k-linux/share/locale\"" -DHAVE_CONFIG_H -I./../include/opcode -I./../readline/readline/.. -I./../zlib -I../bfd -I./../bfd -I./../include -I../libdecnumber -I./../libdecnumber -I./../gnulib/import -I../gnulib/import -I./.. -I.. -I./../libbacktrace/ -I../libbacktrace/ -DTUI=1 -I./.. -pthread -Wall -Wpointer-arith -Wno-unused -Wunused-value -Wunused-variable -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wunused-but-set-parameter -Wunused-but-set-variable -Wno-sign-compare -Wno-error=maybe-uninitialized -Wno-mismatched-tags -Wsuggest-override -Wimplicit-fallthrough=3 -Wduplicated-cond -Wshadow=local -Wdeprecated-copy -Wdeprecated-copy-dtor -Wredundant-move -Wmissing-declarations -Wstrict-null-sentinel -Wformat -Wformat-nonliteral -Werror -g -O2 -c -o unittests/environ-selftests.o -MT unittests/environ-selftests.o -MMD -MP -MF unittests/.deps/environ-selftests.Tpo unittests/environ-selftests.c unittests/environ-selftests.c: In function 'void selftests::gdb_environ_tests::test_self_move()': unittests/environ-selftests.c:228:7: error: moving 'env' of type 'gdb_environ' to itself [-Werror=self-move] 228 | env = std::move (env); | ~~~~^~~~~~~~~~~~~~~~~ unittests/environ-selftests.c:228:7: note: remove 'std::move' call cc1plus: all warnings being treated as errors make[1]: *** [Makefile:1896: unittests/environ-selftests.o] Error 1 make[1]: Leaving directory '/var/lib/laminar/run/gdb-m68k-linux/3/binutils-gdb/gdb' make: *** [Makefile:13193: all-gdb] Error 2 2022-10-03 Simon Marchi gdb: constify inferior::target_is_pushed Change-Id: Ia4143b9c63cb76e2c824ba773c66f5c5cd94b2aa 2022-10-03 Luis Machado [AArch64] Handle W registers as pseudo-registers instead of aliases of X registers The aarch64 port handles W registers as aliases of X registers. This is incorrect because X registers are 64-bit and W registers are 32-bit. This patch teaches GDB how to handle W registers as pseudo-registers of 32-bit, the bottom half of the X registers. Testcase included. 2022-10-03 Luis Machado [AArch64] Fix pseudo-register numbering in the presence of unexpected additional registers When using AArch64 GDB with the QEMU debugging stub (in user mode), we get additional system registers that GDB doesn't particularly care about, so it doesn't number those explicitly. But given the pseudo-register numbers are above the number of real registers, we need to setup/account for the real registers first before going ahead and numbering the pseudo-registers. This has to happen at the end of aarch64_gdbarch_init, after the call to tdesc_use_registers, as that updates the total number of real registers. This is in preparation to supporting pointer authentication for bare metal aarch64 (QEMU). 2022-10-03 Nick Clifton readelf: DO not load section headers from file offset zero * readelf.c (get_32bit_section_headers): Return false if the e_shoff field is zero. (get_64bit_section_headers): Likewise. 2022-10-03 Tsukasa OI RISC-V: Move supervisor instructions after all unprivileged ones This location of supervisor instructions is out of place (because many other privileged instructions are located at the tail but after the supervisor instructions, we have many unprivileged instructions including bit manipulation / crypto / vector instructions). Not only that, this is harmful to implement pseudoinstructions in the latest 'P'-extension proposal (CLROV and RDOV). This commit moves supervisor instructions after all unprivileged instructions. opcodes/ChangeLog: * riscv-opc.c (riscv_opcodes): Adjust indents. Move supervisor instructions after all unprivileged instructions. 2022-10-03 Bruno Larsen Improve GDB's baseclass detection with typedefs When a class inherits from a typedef'd baseclass, GDB may be unable to find the baseclass if the user is not using the typedef'd name, as is tested on gdb.cp/virtbase2.exp; the reason that test case is working under gcc is that the dwarf generated by gcc links the class to the original definition of the baseclass, not to the typedef. If the inheritance is linked to the typedef, such as how clang does it, gdb.cp/virtbase2.exp starts failing. This can also be seen in gdb.cp/impl-this.exp, when attempting to print D::Bint::i, and GDB not being able to find the baseclass Bint. This happens because searching for baseclasses only uses the macro TYPE_BASECLASS_NAME, which returns the typedef'd name. However, we can't switch that macro to checking for typedefs, otherwise we wouldn't be able to find the typedef'd name anymore. This is fixed by searching for members or baseclasses by name, we check both the saved name and the name after checking for typedefs. This also fixes said long-standing bug in gdb.cp/impl-this.exp when the compiler adds information about typedefs in the debuginfo. 2022-10-03 Tsukasa OI RISC-V: Assign DWARF numbers to vector registers This commit assigns DWARF register numbers to vector registers (v0-v31: 96..127) to implement RISC-V DWARF Specification version 1.0-rc4 (now in the frozen state): https://github.com/riscv-non-isa/riscv-elf-psabi-doc/releases/tag/v1.0-rc4 binutils/ChangeLog: * dwarf.c (dwarf_regnames_riscv): Assign DWARF register numbers 96..127 to vector registers v0-v31. gas/ChangeLog: * config/tc-riscv.c (tc_riscv_regname_to_dw2regnum): Support vector registers. * testsuite/gas/riscv/dw-regnums.s: Add vector registers to the DWARF register number test. * testsuite/gas/riscv/dw-regnums.d: Likewise. 2022-10-03 Tsukasa OI RISC-V: Add testcase for DWARF register numbers Although it had csr-dw-regnums.d (for CSRs), it didn't have DWARF register number test for GPRs/FPRs. This commit adds dw-regnums.{s,d} to test such registers. gas/ChangeLog: * testsuite/gas/riscv/dw-regnums.s: New DWARF register number test for GPRs/FPRs. * testsuite/gas/riscv/dw-regnums.d: Likewise. 2022-10-03 GDB Administrator Automatic date update in version.in 2022-10-02 Tom de Vries [gdb/testsuite] Fix waitpid testing in next-fork-other-thread.c In next-fork-other-thread.c, there's this loop: ... do { ret = waitpid (pid, &stat, 0); } while (ret == EINTR); ... The loop condition tests for "ret == EINTR" but waitpid signals EINTR by returning -1 and setting errno to EINTR. Fix this by changing the loop condition to "ret == -1 && errno == EINTR". Tested on x86_64-linux. 2022-10-02 Andrew Burgess gdb/testsuite: handle invalid .exp names passed in TESTS I ran some tests like: $ make check-gdb TESTS="gdb.base/break.exp" then, then I went to rerun the tests later, I managed to corrupt the command line, like this: $ make check-gdb TESTS="gdb.base/breakff.exp" the make command did exit with an error, but DejaGnu appeared to report that every test passed! The tail end of the output looks like this: Illegal Argument "no-matching-tests-found" try "runtest --help" for option list === gdb Summary === # of expected passes 115 /tmp/build/gdb/gdb version 13.0.50.20220831-git -nw -nx -iex "set height 0" -iex "set width 0" -data-directory /tmp/build/gdb/testsuite/../data-directory make[3]: *** [Makefile:212: check-single] Error 1 make[3]: Leaving directory '/tmp/build/gdb/testsuite' make[2]: *** [Makefile:161: check] Error 2 make[2]: Leaving directory '/tmp/build/gdb/testsuite' make[1]: *** [Makefile:1916: check] Error 2 make[1]: Leaving directory '/tmp/build/gdb' make: *** [Makefile:13565: check-gdb] Error 2 For a while, I didn't spot that DejaGnu had failed at all, I saw the 115 passes, and thought everything had run correctly - though I was puzzled that make was reporting an error. What happens is that in gdb/testsuite/Makefile, in the check-single rule, we first run DejaGnu, then run the dg-add-core-file-count.sh script, and finally, we use sed to extract the results from the gdb.sum file. In my case, with the invalid test name, DejaGnu fails, but the following steps are still run, the final result, the 115 passes, is then extracted from the pre-existing gdb.sum file. If I use 'make -jN' then the 'check-parallel' rule, rather than the 'check-single' rule is used. In this case the behaviour is slightly different, the tail end of the output now looks like this: No matching tests found. make[4]: Leaving directory '/tmp/build/gdb/testsuite' find: ‘outputs’: No such file or directory Usage: ../../../src/gdb/testsuite/../../contrib/dg-extract-results.py [-t tool] [-l variant-list] [-L] log-or-sum-file ... tool The tool (e.g. g++, libffi) for which to create a new test summary file. If not specified then output is created for all tools. variant-list One or more test variant names. If the list is not specified then one is constructed from all variants in the files for . sum-file A test summary file with the format of those created by runtest from DejaGnu. If -L is used, merge *.log files instead of *.sum. In this mode the exact order of lines may not be preserved, just different Running *.exp chunks should be in correct order. find: ‘outputs’: No such file or directory Usage: ../../../src/gdb/testsuite/../../contrib/dg-extract-results.py [-t tool] [-l variant-list] [-L] log-or-sum-file ... tool The tool (e.g. g++, libffi) for which to create a new test summary file. If not specified then output is created for all tools. variant-list One or more test variant names. If the list is not specified then one is constructed from all variants in the files for . sum-file A test summary file with the format of those created by runtest from DejaGnu. If -L is used, merge *.log files instead of *.sum. In this mode the exact order of lines may not be preserved, just different Running *.exp chunks should be in correct order. make[3]: Leaving directory '/tmp/build/gdb/testsuite' make[2]: Leaving directory '/tmp/build/gdb/testsuite' make[1]: Leaving directory '/tmp/build/gdb' Rather than DejaGnu failing, we now get a nice 'No matching tests found' message, followed by some other noise. This other noise is first `find` failing, followed by the dg-extract-results.py script failing. What happens here is that, in the check-parallel rule, the outputs directory is deleted before DejaGnu is invoked. Then we try to run all the tests, and finally we use find and dg-extract-results.py to combine all the separate .sun and .log files together. However, if there are no tests run then the outputs/ directory is never created, so the find command and consequently the dg-extract-results.py script, fail. This commit aims to fix the following issues: (1) For check-single and check-parallel rules, don't run any of the post-processing steps if DejaGnu failed to run. This will avoid all the noise after the initial failure of DejaGnu, (2) For check-single ensure that we don't accidentally report previous results, this is related to the above, but is worth calling out as a separate point, and (3) For check-single, print the 'No matching tests found' message just like we do for a parallel test run. This makes the parallel and non-parallel testing behaviour more similar, and I think is clearer than the current 'Illegal Argument' error message. Points (1) and (2) will be handled by moving the post processing steps inside an if block within the recipe. For check-single I propose deleting the gdb.sum and gdb.log files before running DejaGnu, this is similar (I think) to how we delete the outputs/ directory in the check-parallel rule. For point (3) I plan to split the check-single rule in two, the existing check-single will be renamed do-check-single, then a new check-single rule will be added. The new check-single rule can either depend on the new do-check-single, or will ensure the 'No matching tests found' message is printed when appropriate. 2022-10-02 Andrew Burgess gdb/disasm: better intel flavour disassembly styling with Pygments This commit was inspired by this stackoverflow post: https://stackoverflow.com/questions/73491793/why-is-there-a-%C2%B1-in-lea-rax-rip-%C2%B1-0xeb3 One of the comments helpfully links to this Python test case: from pygments import formatters, lexers, highlight def colorize_disasm(content, gdbarch): try: lexer = lexers.get_lexer_by_name("asm") formatter = formatters.TerminalFormatter() return highlight(content, lexer, formatter).rstrip().encode() except: return None print(colorize_disasm("lea [rip+0x211] # COMMENT", None).decode()) Run the test case and you should see that the '+' character is underlined, and could be confused with a combined +/- symbol. What's happening is that Pygments is failing to parse the input text, and the '+' is actually being marked in the error style. The error style is red and underlined. It is worth noting that the assembly instruction being disassembled here is an x86-64 instruction in the 'intel' disassembly style, rather than the default att style. Clearly the Pygments module expects the att syntax by default. If we change the test case to this: from pygments import formatters, lexers, highlight def colorize_disasm(content, gdbarch): try: lexer = lexers.get_lexer_by_name("asm") lexer.add_filter('raiseonerror') formatter = formatters.TerminalFormatter() return highlight(content, lexer, formatter).rstrip().encode() except: return None res = colorize_disasm("lea rax,[rip+0xeb3] # COMMENT", None) if res: print(res.decode()) else: print("No result!") Here I've added the call: lexer.add_filter('raiseonerror'), and I am now checking to see if the result is None or not. Running this and the test now print 'No result!' - instead of styling the '+' in the error style, we instead give up on the styling attempt. There are two things we need to fix relating to this disassembly text. First, Pygments is expecting att style disassembly, not the intel style that this example uses. Fortunately, Pygments also supports the intel style, all we need to do is use the 'nasm' lexer instead of the 'asm' lexer. However, this leads to the second problem; in our disassembler line we have '# COMMENT'. The "official" Intel disassembler style uses ';' for its comment character, however, gas and libopcodes use '#' as the comment character, as gas uses ';' for an instruction separator. Unfortunately, Pygments expects ';' as the comment character, and treats '#' as an error, which means, with the addition of the 'raiseonerror' filter, that any line containing a '#' comment, will not get styled correctly. However, as the i386 disassembler never produces a '#' character other than for comments, we can easily "fix" Pygments parsing of the disassembly line. This is done by creating a filter. This filter looks for an Error token with the value '#', we then change this into a comment token. Every token after this (until the end of the line) is also converted into a comment. In this commit I do the following: 1. Check the 'disassembly-flavor' setting and select between the 'asm' and 'nasm' lexers based on the setting. If the setting is not available then the 'asm' lexer is used by default, 2. Use "add_filter('raiseonerror')" to ensure that the formatted output will not include any error text, which would be underlined, and might be confusing, 3. If the 'nasm' lexer is selected, then add an additional filter that will format '#' and all other text on the line, as a comment, and 4. If Pygments throws an exception, instead of returning None, return the original, unmodified content. This will mean that this one instruction is printed without styling, but GDB will continue to call into the Python code to style later instructions. I haven't included a test specifically for the above error case, though I have manually check that the above case now styles correctly (with no underline). The existing style tests check that the disassembler styling still works though, so I know I've not generally broken things. One final thought I have after looking at this issue is that I wonder now if using Pygments for styling disassembly from every architecture is actually a good idea? Clearly, the 'asm' lexer is OK with att style x86-64, but not OK with intel style x86-64, so who knows how well it will handle other random architectures? When I first added this feature I tested it against some random RISC-V, ARM, and X86-64 (att style) code, and it seemed fine, but I never tried to make an exhaustive check of all instructions, so its quite possible that there are corner cases where things are styled incorrectly. With the above changes I think that things should be a bit better now. If a particular instruction doesn't parse correctly then our Pygments based styling code will just not style that one instruction. This is combined with the fact that many architectures are now moving to libopcodes based styling, which is much more reliable. So, I think it is fine to keep using Pygments as a fallback mechanism for styling all architectures, even if we know it might not be perfect in all cases. 2022-10-02 Andrew Burgess gdb: improve disassembler styling when Pygments raises an exception While working on another issue relating to GDB's use of the Python Pygments package for disassembly styling I noticed an issue in the case where the Pygments package raises an exception. The intention of the current code is that, should the Pygments package raise an exception, GDB will disable future attempts to call into the Pygments code. This was intended to prevent repeated errors during disassembly if, for some reason, the Pygments code isn't working. Since the Pygments based styling was added, GDB now supports disassembly styling using libopcodes, but this is only available for some architectures. For architectures not covered by libopcodes Pygments is still the only option. What I observed is that, if I disable the libopcodes styling, then setup GDB so that the Pygments based styling code will indicate an error (by returning None), GDB does, as expected, stop using the Pygments based styling. However, the libopcodes based styling will instead be used, despite this feature having been disabled. The problem is that the disassembler output is produced into a string_file buffer. When we are using Pygments, this buffer is created without styling support. However, when Pygments fails, we recreate the buffer with styling support. The problem is that we should only recreate the buffer with styling support only if libopcodes styling is enabled. This was an oversight in commit: commit 4cbe4ca5da5cd7e1e6331ce11f024bf3c07b9744 Date: Mon Feb 14 14:40:52 2022 +0000 gdb: add support for disassembler styling using libopcodes This commit: 1. Factors out some of the condition checking logic into two new helper functions use_ext_lang_for_styling and use_libopcodes_for_styling, 2. Reorders gdb_disassembler::m_buffer and gdb_disassembler::m_dest, this allows these fields to be initialised m_dest first, which means that the new condition checking functions can rely on m_dest being set, even when called from the gdb_disassembler constructor, 3. Make use of the new condition checking functions each time m_buffer is initialised, 4. Add a new test that forces the Python disassembler styling function to return None, this will cause GDB to disable use of Pygments for styling, and 5. When we reinitialise m_buffer, and re-disassemble the instruction, call reset the in-comment flag. If the instruction being disassembler ends in a comment then the first disassembly pass will have set the in-comment flag to true. This shouldn't be a problem as we will only be using Pygments, and thus performing a re-disassembly pass, if libopcodes is disabled, so the in-comment flag will never be checked, even if it is set incorrectly. However, I think that having the flag set correctly is a good thing, even if we don't check it (you never know what future uses might come up). 2022-10-02 Andrew Burgess gdb/testsuite: extend styling test for libopcodes styling This commit extends the gdb.base/style.exp test to cover disassembler styling using libopcodes (where available). The test will try to enable libopcode based styling, if this works (because such styling is available) then some tests are run to check that the output is styled, and that the styling can be disabled using 'set style disassembler enabled off'. If libopcodes styling is not available on the current architecture then these new tests will be skipped. I've moved the Python Pygments module check inside the test_disable_disassembler_styling function now, so that the test will be run even when Python Pygments is not available, this allows the new tests discussed above. If the Pygments module is not available then the Pygments based tests will be skipped just as they were before. 2022-10-02 Andrew Burgess gdb: update now gdbarch_register_name doesn't return nullptr After the previous few commit, gdbarch_register_name no longer returns nullptr. This commit audits all the calls to gdbarch_register_name and removes any code that checks the result against nullptr. There should be no visible change after this commit. 2022-10-02 Andrew Burgess gdb: final cleanup of various gdbarch_register_name methods Building on the previous commits, this commit goes through the various gdbarch_register_name methods and removes all the remaining 'return NULL' cases, I claim that these either couldn't be hit, or should be returning the empty string. In all cases the return of NULL was used if the register number being passed to gdbarch_register_name was "invalid", i.e. negative, or greater than the total number of declared registers. I don't believe either of these cases can occur, and the previous commit asserts that this is the case. As a result we can simplify the code by removing these checks. In many cases, where the register names are held in an array, I was able to add a static assert that the array contains the correct number of strings, after that, a direct access into the array is fine. I don't have any means of testing these changes. 2022-10-02 Andrew Burgess gdb/csky: remove nullptr return from csky_pseudo_register_name Building on the previous commits, in this commit I remove two instances of 'return NULL' from csky_pseudo_register_name, and replace them with a return of the empty string. These two are particularly interesting, and worth pulling into their own commit, because these returns of NULL appear to be depended on within other parts of the csky code. In csky-linux-tdep.c in the register collect/supply code, GDB checks for the register name being nullptr in order to decide if a target supports a particular feature or not. I've updated the code to check for the empty string. I have no way of testing this change. 2022-10-02 Andrew Burgess gdb: add asserts to gdbarch_register_name This commit adds asserts to gdbarch_register_name that validate the parameters, and the return value. The interesting thing here is that gdbarch_register_name is generated by gdbarch.py, and so, to add these asserts, I need to update the generation script. I've added two new arguments for Functions and Methods (as declared in gdbarch-components.py), these arguments are 'param_checks' and 'result_checks'. Each of these new arguments can be used to list some expressions that are then used within gdb_assert calls in the generated code. The asserts that validate the API as described in the comment I added to gdbarch_register_name a few commits back; the register number passed in needs to be a valid cooked register number, and the result being returned should not be nullptr. 2022-10-02 Andrew Burgess gdb: check for duplicate register names in selftest Building on the previous commit, this commit extends the register_name selftest to check for duplicate register names. If two registers in the cooked register set (real + pseudo registers) have the same name, then this will show up as duplicate registers in the 'info all-registers' output, but the user will only be able to interact with one copy of the register. In this commit I extend the selftest that I added in the previous commit to check for duplicate register names, I didn't include this functionality in the previous commit because one architecture needed fixing, and I wanted to keep those fixes separate from the fixes in the previous commit. The problematic architecture(s) are powerpc:750 and powerpc:604. In both of these cases the 'dabr' register appears twice, there's a definition of dabr in power-oea.xml which is included into both powerpc-604.xml and powerpc-750.xml. Both of these later two xml files also define the dabr register. I'm hopeful that this change shouldn't break anything, but I don't have the ability to actually test this change, however: On the gdbserver side, neither powerpc-604.xml nor powerpc-750.xml are mentioned in gdbserver/configure.srv, which I think means that gdbserver will never use these descriptions, and, Within GDB the problematic descriptions are held in the variables tdesc_powerpc_604 and tdesc_powerpc_750, which are only mentioned in the variants array in rs6000-tdep.c, this is used when looking up a description based on the architecture. For a native Linux target however, this will not be used as ppc_linux_nat_target::read_description exists, which calls ppc_linux_match_description, which I don't believe can return either of the problematic descriptions. This leaves the other native targets, FreeBSD, AIX, etc. These don't appear to override the ::read_description method, so will potentially return the problematic descriptions, but, in each case I think the ::fetch_registers and ::store_registers methods will ignore the dabr register, which will leave the register as . So, my proposed solution is to just remove the duplicate register from each of powerpc-604.xml and powerpc-750.xml, then regenerate the corresponding C++ source file. With this change made, the selftest now passes for all architectures. 2022-10-02 Andrew Burgess gdb: add a gdbarch_register_name self test, and fix some architectures This commit adds a self-test that checks that gdbarch_register_name never returns nullptr for any valid register number. Most architectures already met this requirement, there were just 6 that failed the new selftest, and are updated in this commit. Beyond the self-tests I don't have any facilities to test that the architectures I've adjusted still work correctly. If you review all the various gdbarch_register_name implementations then you will see that there are far more architectures that seem like they might return nullptr in some situations, e.g. alpha, avr, bpf, etc. This commit doesn't attempt to address these cases as non of them are hit during the selftest. Many of these cases can never be hit, for example, in alpha_register_name GDB checks for a register number less than zero, this case can't happen and could be changed into an assert. A later commit in this series will have a general cleanup of all the various register_name methods, and remove all references to NULL from their code, however, as that commit will be mostly adjusting code that is never hit, I want to keep those changes separate. The selftest has been tested on x86-64, but I don't have access to suitable systems to fully test any of the *-tdep.c code I've changed in this commit. 2022-10-02 Andrew Burgess gdb/gdbarch: add a comment to gdbarch_register_name After the previous commit, this commit sets out to formalise the API for gdbarch_register_name. Not every architecture is actually in compliance with the API I set out here, but I believe that most are. I think architectures that don't comply with the API laid out here will fail the gdb.base/completion.exp test. The claims in the comment are I feel, best demonstrated with the asserts in this code: const char * gdbarch_register_name (struct gdbarch *gdbarch, int regnr) { gdb_assert (regnr >= 0); gdb_assert (regnr < gdbarch_num_cooked_regs (gdbarch)); const char *name = gdbarch->register_name (gdbarch, regnr); gdb_assert (name != nullptr); return name; } Like I said, I don't believe every architecture follows these rules right now, which is why I'm not actually adding any asserts. Instead, this commit adds a comment to gdbarch_register_name, this comment is where I'd like to get to, rather than where we are right now. Subsequent commits will fix all targets to be in compliance with this comment, and will even add the asserts shown above to gdbarch_register_name. 2022-10-02 Andrew Burgess gdb/riscv: fix failure in gdb.base/completion.exp I noticed a test failure in gdb.base/completion.exp for RISC-V on a native Linux target, this is the failure: (gdb) FAIL: gdb.base/completion.exp: complete 'info registers ' The problem is caused by a mismatch in the output of 'maint print registers' and the completion list for 'info registers'. The 'info registers' completion list contains less registers than expected. Additionally, the list of registers extracted from the 'maint print registers' list was wrong too, in some cases the test was grabbing the register number, rather than a register name, Both of these problems have the same root cause, riscv_register_name returns nullptr for some registers when it should return an empty string. The gdbarch_register_name API is not clearly documented anywhere, and at first glance it would appear that the function can return either nullptr, or an empty string to indicate that a register is not available on the current target. Indeed, there are plenty of places in GDB where we compare the output of gdbarch_register_name to both nullptr and '\0' in order to see if a register is supported or not, and there are plenty of targets that return empty string in some cases, and nullptr in others. However, the 'info registers' completion code (reg_or_group_completer) clearly depends on user_reg_map_regnum_to_name only returning nullptr when the passed in regnum is greater than the maximum possible register number (i.e. after all physical registers, pseudo-registers, and user-registers), this means that gdbarch_register_name should not be returning nullptr. I did consider "fixing" user_reg_map_regnum_to_name, if gdbarch_register_name returns nullptr, I could convert to an empty string at this point, but that felt like a real hack, so I discarded that plan. The next possibility I considered was "fixing" reg_or_group_completer to not rely on nullptr to indicate the end marker. Or rather, I could have reg_or_group_completer use gdbarch_num_cooked_regs, we know that we should check at least that many register numbers. Then, once we're passed that limit, we keep checking until we hit a nullptr. This would absolutely work, and didn't actually feel that bad, but, it still felt a little weird that gdbarch_register_name could return nullptr OR the empty string to mean the same thing, so I wondered if the "right" solution was to have gdbarch_register_name not return nullptr. With this in mind I tried an experiment: I added a self-test that, for each architecture, calls gdbarch_register_name for every register number up to the gdbarch_num_cooked_regs limit, and checks that the name is not nullptr. Only a handful of architectures failed this test, RISC-V being one of them. This seems to suggest that most architectures agree that the correct API for gdbarch_register_name is to return an empty string for registers that are not supported on the current target, and that returning nullptr is really a mistake. In this commit I will update the RISC-V target so that GDB no longer returns nullptr from riscv_register_name, instead we return the empty string. In subsequent commits I will add the selftest that I mention above, and will fix the targets that fail the selftest. With this change the gdb.base/completion.exp test now passes. 2022-10-02 Andrew Burgess gdb/testsuite: rewrite capture_command_output proc I noticed a test failure in gdb.base/completion.exp for RISC-V on a native Linux target. Upon investigation I discovered a couple of reasons for the failure, this commit addresses one of them. A later commit will address the other issue. The completion.exp test makes use of the capture_command_output proc to collect the output of the 'maint print registers' command. For RISC-V this command produces a lot of output. Currently the capture_command_output proc tries to collect the complete command output in a single expect buffer, and what I see is an error caused by the expect buffer becoming full. This commit rewrites capture_command_output to make use of gdb_test_multiple to collect the command output line at a time, in this way we avoid overflowing the expect buffer. The capture_command_output proc has some logic for skipping a prefix pattern, which is passed in to the proc as an argument. In order to handle this correctly (only matching the prefix at the start of the command output), I use two gdb_test_multiple calls, the first spots and discards the echoed command and the (optional) prefix pattern, the second gdb_test_multiple call then collects the rest of the command output line at a time until a prompt is seen. There is one slight oddity with the current implementation, which I have changed in my rewrite, this does, slightly, change the behaviour of the proc. The current implementation uses this pattern: -re "[string_to_regexp ${command}]\[\r\n\]+${prefix}(.*)\[\r\n\]+$gdb_prompt $" Now a typical command output will look like this: output here\r\n (gdb) As the TCL regexp matching is greedy, TCL will try to match as much as possible in one part of the pattern before moving on to the next. Thus, when this matches against (.*)[\r\n]+, the (.*) will end up matching against 'output here\r' and the [\r\n]+ will match '\n' only. In short the previous implementation would leave the '\r' on the end of the returned text, but not the final trailing '\n'. Now clearly I could make a new version of capture_command_output that maintained this behaviour, but I couldn't see any reason to do this. So, my new implementation drops the final '\r\n' completely, in our example above we now return 'output here' with no '\r'. This change doesn't seem to affect any of the existing tests, but I thought it was worth mentioning. 2022-10-02 Andrew Burgess gdb/mi: new options for -data-disassemble command Now that the disassembler has two different strategies for laying out the opcode bytes of an instruction (see /r vs /b for the disassemble command), I wanted to add support for this to the MI disassemble command. Currently the -data-disassemble command takes a single 'mode' value, which currently has 6 different values (0 -> 5), 3 of these modes relate to opcode display. So, clearly I should just add an additional 3 modes to handle the new opcode format, right? No, I didn't think that was a great idea either. So, I wonder, could I adjust the -data-disassemble command in a backward compatible way, that would allow GDB to move away from using the mode value altogether? I think we can. In this commit, I propose adding two new options to -data-disassemble, these are: --opcodes none|bytes|display --source Additionally, I will make the mode optional, and default to mode 0 if no mode value is given. Mode 0 is the simplest, no source code, no opcodes disassembly mode. The two new options are only valid for mode 0, if they are used with any other mode then an error is thrown. The --opcodes option can add opcodes to the result, with 'bytes' being equivalent to 'disassemble /b' and 'display' being 'disassemble /r'. The --source option will enable the /s style source code display, this is equivalent to modes 4 and 5. There is no way, using the new command options to get the now deprecated /m style source code display, that is mode 1 and 3. My hope is that new users of the MI will not use the mode at all, and instead will just use the new options to achieve the output they need. Existing MI users can continue to use the mode, and will not need to be updated to use the new options. 2022-10-02 Andrew Burgess gdb/mi: some int to bool conversion Just some simple int to bool conversion in mi_cmd_disassemble. There should be no user visible changes after this commit. 2022-10-02 Andrew Burgess gdb/doc: update syntax of -data-disassemble command arguments The argument documentation for -data-disassemble looks like this: -data-disassemble [ -s @var{start-addr} -e @var{end-addr} ] | [ -a @var{addr} ] | [ -f @var{filename} -l @var{linenum} [ -n @var{lines} ] ] -- @var{mode} However, I believe, according to the 'Notation and Terminology' section, this means that the there are 3 optional location specification argument groups for the command, followed by a non-optional '-- mode'. However, this is not true, one of the location specifications must be given, i.e. we can't choose to give NO location specification, which is what the above implies. I propose that we change this to instead be: -data-disassemble ( -s @var{start-addr} -e @var{end-addr} | -a @var{addr} | -f @var{filename} -l @var{linenum} [ -n @var{lines} ] ) -- @var{mode} By placing all the location specifications within '( ... )' we indication that these are a group, from which one of the options, separated by '|', must be selected. However, the 'Notation and Terminology' section only describes two uses for parenthesis: '( GROUP )*' and '( GROUP )+', in the first case GROUP is repeated zero or more times, and in the second GROUP is repeated 1 or more times. Neither of those exactly describe what I want, which is GROUP must appear exactly once. I propose to extend 'Notation and Terminology' to include '( GROUP )' which means that GROUP should appear exactly once. This change is important because, in a later commit, I want to add additional optional arguments to the -data-disassemble command, and things start to get confusing with the original syntax. 2022-10-02 Andrew Burgess gdb: make gdb_disassembly_flag unsigned In a later commit I want to use operator~ on a gdb_disassembly_flag flag value. This is currently not possible as gdb_disassembly_flag is, by default, signed. This commit just makes this enum unsigned. There should be no user visible changes after this commit. 2022-10-02 Andrew Burgess gdb: disassembler opcode display formatting This commit changes the format of 'disassemble /r' to match GNU objdump. Specifically, GDB will now display the instruction bytes in as 'objdump --wide --disassemble' does. Here is an example for RISC-V before this patch: (gdb) disassemble /r 0x0001018e,0x0001019e Dump of assembler code from 0x1018e to 0x1019e: 0x0001018e : 03 26 84 fe lw a2,-24(s0) 0x00010192 : 83 25 c4 fe lw a1,-20(s0) 0x00010196 : 61 65 lui a0,0x18 0x00010198 : 13 05 85 6a addi a0,a0,1704 0x0001019c : f1 22 jal 0x10368 End of assembler dump. And here's an example after this patch: (gdb) disassemble /r 0x0001018e,0x0001019e Dump of assembler code from 0x1018e to 0x1019e: 0x0001018e : fe842603 lw a2,-24(s0) 0x00010192 : fec42583 lw a1,-20(s0) 0x00010196 : 6561 lui a0,0x18 0x00010198 : 6a850513 addi a0,a0,1704 0x0001019c : 22f1 jal 0x10368 End of assembler dump. There are two differences here. First, the instruction bytes after the patch are grouped based on the size of the instruction, and are byte-swapped to little-endian order. Second, after the patch, GDB now uses the bytes-per-line hint from libopcodes to add whitespace padding after the opcode bytes, this means that in most cases the instructions are nicely aligned. It is still possible for a very long instruction to intrude into the disassembled text space. The next example is x86-64, before the patch: (gdb) disassemble /r main Dump of assembler code for function main: 0x0000000000401106 <+0>: 55 push %rbp 0x0000000000401107 <+1>: 48 89 e5 mov %rsp,%rbp 0x000000000040110a <+4>: c7 87 d8 00 00 00 01 00 00 00 movl $0x1,0xd8(%rdi) 0x0000000000401114 <+14>: b8 00 00 00 00 mov $0x0,%eax 0x0000000000401119 <+19>: 5d pop %rbp 0x000000000040111a <+20>: c3 ret End of assembler dump. And after the patch: (gdb) disassemble /r main Dump of assembler code for function main: 0x0000000000401106 <+0>: 55 push %rbp 0x0000000000401107 <+1>: 48 89 e5 mov %rsp,%rbp 0x000000000040110a <+4>: c7 87 d8 00 00 00 01 00 00 00 movl $0x1,0xd8(%rdi) 0x0000000000401114 <+14>: b8 00 00 00 00 mov $0x0,%eax 0x0000000000401119 <+19>: 5d pop %rbp 0x000000000040111a <+20>: c3 ret End of assembler dump. Most instructions are aligned, except for the very long instruction. Notice too that for x86-64 libopcodes doesn't request that GDB group the instruction bytes. This matches the behaviour of objdump. In case the user really wants the old behaviour, I have added a new modifier 'disassemble /b', this displays the instruction byte at a time. For x86-64, which never groups instruction bytes, /b and /r are equivalent, but for RISC-V, using /b gets the old layout back (except that the whitespace for alignment is still present). Consider our original RISC-V example, this time using /b: (gdb) disassemble /b 0x0001018e,0x0001019e Dump of assembler code from 0x1018e to 0x1019e: 0x0001018e : 03 26 84 fe lw a2,-24(s0) 0x00010192 : 83 25 c4 fe lw a1,-20(s0) 0x00010196 : 61 65 lui a0,0x18 0x00010198 : 13 05 85 6a addi a0,a0,1704 0x0001019c : f1 22 jal 0x10368 End of assembler dump. Obviously, this patch is a potentially significant change to the behaviour or /r. I could have added /b with the new behaviour and left /r alone. However, personally, I feel the new behaviour is significantly better than the old, hence, I made /r be what I consider the "better" behaviour. The reason I prefer the new behaviour is that, when I use /r, I almost always want to manually decode the instruction for some reason, and having the bytes displayed in "instruction order" rather than memory order, just makes this easier. The 'record instruction-history' command also takes a /r modifier, and has been modified in the same way as disassemble; /r gets the new behaviour, and /b has been added to retain the old behaviour. Finally, the MI command -data-disassemble, is unchanged in behaviour, this command now requests the raw bytes of the instruction, which is equivalent to the /b modifier. This means that the MI output will remain backward compatible. 2022-10-02 Andrew Burgess gdb/disasm: read opcodes bytes with a single read_code call This commit reduces the number of times we call read_code when printing the instruction opcode bytes during disassembly. I've added a new gdb::byte_vector within the gdb_pretty_print_disassembler class, in line with all the other buffers that gdb_pretty_print_disassembler needs. This byte_vector is then resized as needed, and filled with a single read_code call for each instruction. There should be no user visible changes after this commit. 2022-10-02 Andrew Burgess gdb/testsuite: new test for -data-disassemble opcodes format Add another test for the output of MI command -data-disassemble. The new check validates the format of the 'opcodes' field, specifically, this test checks that the field contains a series of bytes, separated by a single space. We also check that the bytes are in the correct order, that is, the first byte is from the lowest address, and subsequent bytes are from increasing addresses. The motivation for this test (besides more tests being generally good) is that I plan to make changes to how opcode bytes are displayed in the disassembler output, and I want to ensure that I don't break any existing MI behaviour. There should be no user visible changes to GDB after this commit. 2022-10-02 GDB Administrator Automatic date update in version.in 2022-10-01 GDB Administrator Automatic date update in version.in 2022-09-30 Tsukasa OI RISC-V: Relax "fmv.[sdq]" requirements This commit relaxes requirements to "fmv.s" instructions from 'F' to ('F' or 'Zfinx'). The same applies to "fmv.d" and "fmv.q". Note that 'Zhinx' extension already contains "fmv.h" instruction (as well as 'Zfh'). gas/ChangeLog: * testsuite/gas/riscv/zfinx.s: Add "fmv.s" instruction. * testsuite/gas/riscv/zfinx.d: Likewise. * testsuite/gas/riscv/zdinx.s: Add "fmv.d" instruction. * testsuite/gas/riscv/zdinx.d: Likewise. * testsuite/gas/riscv/zqinx.d: Add "fmv.q" instruction. * testsuite/gas/riscv/zqinx.s: Likewise. opcodes/ChangeLog: * riscv-opc.c (riscv_opcodes): Relax requirements to "fmv.[sdq]" instructions to support those in 'Zfinx'/'Zdinx'/'Zqinx'. 2022-09-30 Tsukasa OI RISC-V: Reorganize and enhance 'Zfinx' tests This commit adds certain test cases for 'Zfinx'/'Zdinx'/'Zqinx' extensions and reorganizes them, fixing coding style while improving coverage. This is partially based on jiawei's 'Zhinx' testcases. gas/ChangeLog: * testsuite/gas/riscv/zfinx.s: Use different registers for better encode space testing. Make indentation consistent. Add tests for instruction with rounding mode. Change march to minimum required extensions. Remove source line. * testsuite/gas/riscv/zfinx.d: Likewise. * testsuite/gas/riscv/zdinx.s: Likewise. * testsuite/gas/riscv/zdinx.d: Likewise. * testsuite/gas/riscv/zqinx.s: Likewise. Also use even-numbered registers to use valid register pairs. * testsuite/gas/riscv/zqinx.d: Likewise. 2022-09-30 Christoph Müllner RISC-V: Eliminate long-casts of X_add_number in diagnostics There is no need for casts to (signed/unsigned) long, as we can use C99's PRId64/PRIu64 format specifiers. 2022-09-30 Jan Beulich RISC-V: fallout from "re-arrange opcode table for consistent alias handling" Several new testcasee have appeared since the submission of said change, some of which now also need adjustment. RISC-V: fix build after "Add support for arbitrary immediate encoding formats" Pre- and post-increment/decrement are side effects, the behavior of which is undefined when combined with passing an address of the accessed variable in the same function invocation. There's no need for the increments here - simply adding 1 achieves the intended effect without triggering compiler diagnostics (which are fatal with -Werror). objcopy: avoid "shadowing" of remove() function name remove() is a standard library function (declared in stdio.h), which triggers a "shadows a global declaration" warning with some gcc versions. RISC-V: drop stray INSN_ALIAS flags FENCE.TSO isn't an alias. ZIP and UNZIP in the long run likely are, but presently they aren't. This fixes disassembly of these insns with -Mno-aliases. 2022-09-30 Jan Beulich RISC-V: re-arrange opcode table for consistent alias handling For disassembly to pick up aliases in favor of underlying insns (helping readability in the common case), the aliases need to come ahead of the "base" insns. Slightly more code movement is needed because of insns with the same name needing to stay next to each other. Note that the "rorw" alias entry also has the missing INSN_ALIAS added here. Clone a few testcases to exercise -Mno-aliases some more, better covering the differences between the default and that disassembly mode. 2022-09-30 Jan Beulich x86: correct build dependencies in opcodes/ With the command in the rule merely being "echo", i386-tbl.h won't be rebuilt if missing, when at the same time i386-init.h is present and up-to-date. Use a pattern rule instead to express the multiple targets correctly (the &: rule separator is supported only by GNU make 4.3 and newer). Note that now, for the opposite case to work (i386-tbl.h is up-to-date but i386-init.h is missing), i386-init.h also needs mentioning as a dependency somewhere: Add a fake dependency for i386-opc.lo ("fake" because i386-opc.c doesn't include that header). At the same time use $(AM_V_GEN) in the actual rule, replacing the earlier (open-coded) "echo". And while there also drop a duplicate dependency of i386-gen.o on i386-opc.h. 2022-09-30 Jan Beulich x86: improve match_template()'s diagnostics At the example of extractps $0, %xmm0, %xmm0 insertps $0, %xmm0, %eax (both having respectively the same mistake of using the wrong kind of destination register) it is easy to see that current behavior is far from ideal: The former results in "unsupported instruction" for 32-bit code simply because the 2nd template we have is a Cpu64 one. Instead we should aim at emitting the "best" possible error, which will typically be the one where we passed the largest number of checks. Generalize the original "specific_error" approach by making it apply to the entire matching loop, utilizing that line numbers increase as we pass further checks. 2022-09-30 Jan Beulich x86/Intel: restrict suffix derivation While in some cases deriving an AT&T-style suffix from an Intel syntax memory operand size specifier is necessary, in many cases this is not only pointless, but has led to the introduction of various workarounds: Excessive use of IgnoreSize and NoRex64 as well as the ToDword and ToQword attributes. Suppress suffix derivation when we can clearly tell that the memory operand's size isn't going to be needed to infer the possible need for the low byte/word opcode bit or an operand size prefix (0x66 or REX.W). As a result ToDword and ToQword can be dropped entirely, plus a fair number of IgnoreSize and NoRex64 can also be got rid of. Note that IgnoreSize needs to remain on legacy encoded SIMD insns with GPR operand, to avoid emitting an operand size prefix in 16-bit mode. (Since 16-bit code using SIMD insns isn't well tested, clone an existing testcase just enough to cover a few insns which are potentially problematic but are being touched here.) Note that while folding the VCVT{,T}S{S,D}2SI templates, VCVT{,T}SH2SI isn't included there. This is to fulfill the request of not allowing L and Q suffixes there, despite the inconsistency with VCVT{,T}S{S,D}2SI. 2022-09-30 liuzhensong LoongArch: Update ELF e_flags handling according to specification. Update handling of e_flags according to the documentation update [1] (discussions [2][3]). Object file bitness is now represented in the EI_CLASS byte. The e_flags field is now interpreted as follows: e_flags[2:0]: Base ABI modifier - 0x1: soft-float - 0x2: single-precision hard-float - 0x3: double-precision hard-float e_flags[7:6]: ELF object ABI version - 0x0: v0 - 0x1: v1 [1]: https://github.com/loongson/LoongArch-Documentation/blob/main/docs/LoongArch-ELF-ABI-EN.adoc#e_flags-identifies-abi-type-and-version [2]: https://github.com/loongson/LoongArch-Documentation/pull/61 [3]: https://github.com/loongson/LoongArch-Documentation/pull/47 2022-09-30 Vladimir Mezentsev gprofng: fix cppcheck warnings gprofng/ChangeLog 2022-09-29 Vladimir Mezentsev * common/hwcdrv.c: Fix cppcheck warning. * src/ABS.h: Likewise. * src/CompCom.cc: Likewise. 2022-09-30 Tom de Vries [gdb/testsuite] Fix gdb.mi/mi-sym-info.exp on openSUSE Tumbleweed On openSUSE Tumbleweed, I run into: ... FAIL: gdb.mi/mi-sym-info.exp: List all functions from debug information only ... The problem is in matching this string: ... {name="_start",type="void (void)",description="void _start(void);"} ... using regexp fun_re, which requires a line field: ... set fun_re \ "\{line=\"$decimal\",name=${qstr},type=${qstr},description=${qstr}\}" ... Fix this by making the line field optional in fun_re. Tested on x86_64-linux. 2022-09-30 Tsukasa OI RISC-V: Add privileged extensions without instructions/CSRs Currently, GNU Binutils does not support following privileged extensions: - 'Smepmp' - 'Svnapot' - 'Svpbmt' as they do not provide new CSRs or new instructions ('Smepmp' extends the privileged architecture CSRs but does not define the CSR itself). However, adding them might be useful as we no longer have to "filter" ISA strings just for toolchains (if full ISA string is given by a vendor, we can straightly use it). And there's a fact that supports this theory: there's already an (unprivileged) extension which does not provide CSRs or instructions (but only an architectural guarantee): 'Zkt' (constant timing guarantee for certain subset of RISC-V instructions). This simple commit simply adds three privileged extensions listed above. bfd/ChangeLog: * elfxx-riscv.c (riscv_supported_std_s_ext): Add 'Smepmp', 'Svnapot' and 'Svpbmt' extensions. 2022-09-30 Tsukasa OI gdb: Remove unused extra_lines variable Clang generates a warning if there is a variable that is set but not used otherwise ("-Wunused-but-set-variable"). On the default configuration, it causes a build failure (unless "--disable-werror" is specified). The only extra_lines use in arrange_linetable function is removed on the commit 558802e4d1c5dcbd0df7d2c6ef62a6deac247a2f ("gdb: change subfile::line_vector to an std::vector"). So, this variable should be removed to prevent a build failure. 2022-09-30 Tom de Vries [gdb/testsuite] Add aranges to gdb.dwarf2/dw2-dir-file-name.exp Since commit 52b920c5d20 ("[gdb/testsuite] Fix gdb.dwarf2/dw2-dir-file-name.exp for ppc64le"), the test-case fails with target board cc-with-debug-names, due to missing .debug_aranges info. Add the missing .debug_aranges info. Also add a file_id option to Dwarf::assemble, to make it possible to contribute to an already open file. Tested on x86_64-linux. 2022-09-30 Tom de Vries [gdb/c++] Print destructor the same for gcc and clang Consider the test-case contained in this patch. With g++ (7.5.0) we have for "ptype A": ... type = class A { public: int a; A(void); ~A(); } ... and with clang++ (13.0.1): ... type = class A { public: int a; A(void); ~A(void); } ... and we observe that the destructor is printed differently. There's a difference in debug info between the two cases: in the clang case, there's one artificial parameter, but in the g++ case, there are two, and these similar cases are handled differently in cp_type_print_method_args. This is due to this slightly convoluted bit of code: ... i = staticp ? 0 : 1; if (nargs > i) { while (i < nargs) ... } else if (varargs) gdb_printf (stream, "..."); else if (language == language_cplus) gdb_printf (stream, "void"); ... The purpose of "i = staticp ? 0 : 1" is to skip the printing of the implicit this parameter. In commit 5f4d1085085 ("c++/8218: Destructors w/arguments"), skipping of other artificial parameters was added, but using a different method: rather than adjusting the potential loop start, it skips the parameter in the loop. The observed difference in printing is explained by whether we enter the loop: - in the clang case, the loop is not entered and we print "void". - in the gcc case, the loop is entered, and nothing is printed. Fix this by rewriting the code to: - always enter the loop - handle whether arguments need printing in the loop - keep track of how many arguments are printed, and use that after the loop to print void etc. such that we have the same for both gcc and clang: ... A(void); ~A(void); ... Note that I consider the discussion of whether we want to print: - A(void) / ~A(void), or - A() / ~A() out-of-scope for this patch. Tested on x86_64-linux. 2022-09-30 Alan Modra PR29626, Segfault when disassembling ARM code PR 29626 * arm-dis.c (mapping_symbol_for_insn): Return false on zero symtab_size. Delete later symtab_size test. 2022-09-30 GDB Administrator Automatic date update in version.in 2022-09-29 Simon Marchi gdb: make target_auxv_parse static and rename It is only used in auxv.c. Also, given it is not strictly a wrapper around target_ops::auxv (since 27a48a9223d0 "Add auxv parsing to the architecture vector."), I think that the name prefixed with target is a bit misleading. Rename to just parse_auxv. Change-Id: I41cca055b92c8ede37c258ba6583746a07d8f77e 2022-09-29 Simon Marchi gdb: make fprint_target_auxv static It's only used in auxv.c. Change-Id: I4992d9aae37b6631a074ab99bbab2f619725b642 2022-09-29 Simon Marchi gdb: constify auxv parse functions Constify the input parameters of the various auxv parse functions, they don't need to modify the raw auxv data. Change-Id: I13eacd5ab8e925ec2b5c1f7722cbab39c41516ec 2022-09-29 Simon Marchi gdb: constify target_stack::is_pushed The target_ops parameters here can be made const. Change-Id: Ibc18b17d6b21d06145251a03e68aca90538117d6 2022-09-29 Keith Seitz Constify target_desc declarations This patch changes various global target_desc declarations to const, thereby correcting a prominent source of ODR violations in PowerPC-related target code. The majority of files/changes are mechanical const-ifications accomplished by regenerating the C files in features/. This also required manually updating mips-linux-tdep.h, s390-linux-tdep.h, nios2-tdep.h, s390-tdep.h, arch/ppc-linux-tdesc.h, arch/ppc-linux-common.c, and rs6000-tdep.c. Patch tested against the sourceware trybot, and fully regression tested against our (Red Hat's) internal test infrastructure on Rawhide aarch64, s390x, x86_64, and powerpcle. With this patch, I can finally enable LTO in our GDB package builds. [Tested with a rawhide scratch build containing this patch.] Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=24835 2022-09-29 Keith Seitz cleanup: Add missing feature/ XML files to Makefile This patch adds some missing .xml files to features/Makefile so that when the directory's C files are regenerated, all files are appropriately remade. This has demonstrated that there have been several "misses" in regenerating files in this directory. Namely, arm-secext.c and sparc{32,64}-solaris.c. For the former case, there was what essentially amounts to a typo regarding the create feature function's name. In the later case, this file has missed at least one important update in July, 2020, when allocate_target_description was changed to return a unique pointer. Those corrections are included. 2022-09-29 Nick Clifton Add -B to the help output from gprof, and add suitable documentation. PR 29627 * gprof.c (usage): Add -B. * gprof.texi (synopsis): Add -B. (Output Options): Add entry for -B. 2022-09-29 GDB Administrator Automatic date update in version.in 2022-09-28 Pedro Alves Fix GDB build: ELF support check & -lzstd GDB fails to build for me, on Ubuntu 20.04. I get: ... CXXLD gdb /usr/bin/ld: linux-tdep.o: in function `linux_corefile_thread(thread_info*, linux_corefile_thread_data*)': /home/pedro/gdb/binutils-gdb/src/gdb/linux-tdep.c:1831: undefined reference to `gcore_elf_build_thread_register_notes(gdbarch*, thread_info*, gdb_signal, bfd*, std::unique_ptr >*, int*)' /usr/bin/ld: linux-tdep.o: in function `linux_make_corefile_notes(gdbarch*, bfd*, int*)': /home/pedro/gdb/binutils-gdb/src/gdb/linux-tdep.c:2117: undefined reference to `gcore_elf_make_tdesc_note(bfd*, std::unique_ptr >*, int*)' collect2: error: ld returned 1 exit status make[2]: *** [Makefile:2149: gdb] Error 1 make[2]: Leaving directory '/home/pedro/gdb/binutils-gdb/build/gdb' make[1]: *** [Makefile:11847: all-gdb] Error 2 make[1]: Leaving directory '/home/pedro/gdb/binutils-gdb/build' make: *** [Makefile:1004: all] Error 2 Those undefined functions exist in gdb/gcore-elf.c, which is only included in the build if GDB's configure thinks that the target you're configuring for is an ELF target. GDB's configure thinks my system isn't ELF, which is incorrect. For the ELF support check, gdb/config.log shows: configure:17387: checking for ELF support in BFD configure:17407: gcc -o conftest -I/home/pedro/gdb/binutils-gdb/src/gdb/../include -I../bfd -I/home/pedro/gdb/binutils-gdb/src/gdb/../bfd -g3 -O0 -L../bfd -L../libiberty -lzstd conftest.c -lbfd -liberty -lz -lncursesw -lm -ldl >&5 /usr/bin/ld: ../bfd/libbfd.a(compress.o): in function `decompress_contents': /home/pedro/gdb/binutils-gdb/src/bfd/compress.c:42: undefined reference to `ZSTD_decompress' /usr/bin/ld: /home/pedro/gdb/binutils-gdb/src/bfd/compress.c:44: undefined reference to `ZSTD_isError' /usr/bin/ld: ../bfd/libbfd.a(compress.o): in function `bfd_compress_section_contents': /home/pedro/gdb/binutils-gdb/src/bfd/compress.c:195: undefined reference to `ZSTD_compress' /usr/bin/ld: /home/pedro/gdb/binutils-gdb/src/bfd/compress.c:198: undefined reference to `ZSTD_isError' collect2: error: ld returned 1 exit status configure:17407: $? = 1 ... configure:17417: result: no Note how above, in the gcc command line, "-lzstd" appears before "-lbfd". That explain the link failure. It should appear after, like -lz does. This commit fixes it, by moving ZSTD_LIBS from LDFLAGS to LIBS, next to -lz, in GDB_AC_CHECK_BFD, and regenerating gdb/configure. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29630 Change-Id: I1f4128dde634e8ea04c9002904f1005a8b3a6863 2022-09-28 Simon Marchi gdb: remove trailing spaces in README Change-Id: Ic7f8e415acd1bff6194cf08ed646bff45571f165 2022-09-28 Tom Tromey Treat Character as a discrete type in Ada A user noticed that gdb would assert when printing a certain array with array-indexes enabled. This turned out to be caused by the array having an index type of Character, which is completely valid in Ada. This patch changes the Ada support to recognize Character as a discrete type, and adds some tests. Because this is Ada-specific and was also reviewed internally, I am checking it in. 2022-09-28 Nick Clifton The help document of size misses an option. PR 29628 * size.c (usage): Add -f. * doc/binutils.texi (size): Add -f. 2022-09-28 Clément Chigot ld/testsuite: force warnings when dealing with execstack tests Binutils can be configured to avoid printing the execstack or RWD segment warnings. In this case, the first test of PR ld/29072 will fail. Fix that by always manually forcing the warnings for it. ld/ChangeLog: * testsuite/ld-elf/elf.exp (PR ld/29072): Force execstack and RWD segment warnings. 2022-09-28 Alan Modra Re: egrep in binutils Multi-line patterns for grep are not supported on some old versions of grep. binutils/ * embedspu.sh: Replace multi-line grep with sed. ld/ * testsuite/ld-elfvers/vers.exp: Replace multi-line grep with sed. 2022-09-28 Pedro Alves Renenerate {gdb,gdbserver}/configure Pick up config/lib-ld.m4 changes from: commit 67d1991b785bdfef1d70cddfa0202b99b43ccce9 Author: Alan Modra AuthorDate: Wed Sep 28 13:37:31 2022 +0930 Commit: Alan Modra CommitDate: Wed Sep 28 13:37:31 2022 +0930 egrep in binutils Change-Id: Ifc84d30f1fca015e80bafa80f9a35616b0077220 2022-09-28 Nick Clifton The help document of as misses some many options PR 29623 * as.c (show_usage): Document the --dump-config, --gdwarf-cie-version, --hash-size, --multibyte-handling, and --reduce-memory-overheads options. * config/tc-i386.c (md_show_usage): Document the -O option. * doc/as.texi: Document the --dump-config, --emulation, --hash-size, and --reduce-memory-overheads options. 2022-09-28 Alan Modra egrep in binutils Apparently some distros have a nagging egrep that helpfully tells you egrep is deprecated and to use "grep -E". The nag message causes a ld testsuite failure. What's more the advice isn't that good. The "-E" flag may not be available with older versions of grep. This patch fixes bare invocation of egrep within binutils, replacing it with the autoconf $EGREP or with grep. config/ * lib-ld.m4 (AC_LIB_PROG_LD_GNU): Require AC_PROG_EGREP and invoke $EGREP. (AC_LIB_PROG_LD): Likewise. binutils/ * configure: Regenerate. * embedspu.sh: Replace egrep with grep. gold/ * testsuite/Makefile.am (flagstest_compress_debug_sections.check): Replace egrep with grep. * testsuite/Makefile.in: Regenerate. * testsuite/bnd_ifunc_1.sh: Replace egrep with $EGREP. * testsuite/bnd_ifunc_2.sh: Likewise. * testsuite/bnd_plt_1.sh: Likewise. * testsuite/discard_locals_test.sh: Likewise. * testsuite/gnu_property_test.sh: Likewise. * testsuite/no_version_test.sh: Likewise. * testsuite/pr18689.sh: Likewise. * testsuite/pr26936.sh: Likewise. * testsuite/retain.sh: Likewise. * testsuite/split_i386.sh: Likewise. * testsuite/split_s390.sh: Likewise. * testsuite/split_x32.sh: Likewise. * testsuite/split_x86_64.sh: Likewise. * testsuite/ver_test_pr16504.sh: Likewise. intl/ * configure: Regenerate. ld/ * testsuite/ld-elfvers/vers.exp (test_ar): Replace egrep with grep. 2022-09-28 Alan Modra regen bfd/configure 2022-09-28 Alan Modra asan: _bfd_stab_section_find_nearest_line segv The segv was on "info->strs[strsize - 1] = 0;" with strsize zero. OK, if strsize is zero we don't have any filenames in stabs so no useful info. * syms.c (_bfd_stab_section_find_nearest_line): Exit if either stabsize or strsize is zero. 2022-09-28 Alan Modra asan: segv in _bfd_archive_close_and_cleanup Uninitialised arelt_data->parent_cache led to this segv. * pdb.c (pdb_get_elt_at_index): Clear arelt_data. 2022-09-28 GDB Administrator Automatic date update in version.in 2022-09-27 Fangrui Song sim: Link ZSTD_LIBS This fixes linker errors in a `../../configure --enable-targets --enable-sim; make all-gdb` build. 2022-09-27 Tsukasa OI gold: Suppress "unused" variable warning on Clang Clang generates a warning if there is a variable that is set but not used otherwise ("-Wunused-but-set-variable"). On the default configuration, it causes a build failure (unless "--disable-werror" is specified). Because the cause of this error is in the Bison-generated code ($(srcdir)/gold/yyscript.y -> $(builddir)/gold/yyscript.c), this commit suppresses this warning ("-Wunused-but-set-variable") by placing DIAGNOSTIC_IGNORE_UNUSED_BUT_SET_VARIABLE macro at the end of user prologue on yyscript.y. * yyscript.y: Suppress -Wunused-but-set-variable warning on the Bison-generated code. 2022-09-27 Fangrui Song libctf: Add ZSTD_LIBS to LIBS so that ac_cv_libctf_bfd_elf can be true 2022-09-27 Fangrui Song binutils, gdb: support zstd compressed debug sections PR29397 PR29563: Add new configure option --with-zstd which defaults to auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support zstd compressed debug sections for most tools. * bfd: for addr2line, objdump --dwarf, gdb, etc * gas: support --compress-debug-sections=zstd * ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd * objcopy: support ELFCOMPRESS_ZSTD input for --decompress-debug-sections and --compress-debug-sections=zstd * gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd symbols, so gdb has to link against -lzstd in this patch. If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this is too heavyweight, so don't do it for now. ``` % ld/ld-new a.o ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support ... % ld/ld-new a.o --compress-debug-sections=zstd ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support % binutils/objcopy --compress-debug-sections=zstd a.o b.o binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support % binutils/objcopy b.o --decompress-debug-sections binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support ... ``` 2022-09-27 Alan Modra PR29617, ld segfaults when bfd_close fails PR 29617 * ldmain.c (main): Don't access output_bfd after bfd_close. 2022-09-27 GDB Administrator Automatic date update in version.in 2022-09-26 Simon Marchi gdb/testsuite: update field names in gdb-gdb.py.in Patches that renamed the type::length and type::target_type fields didn't update gdb-gdb.py.in accordingly, do that. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29599 Change-Id: I0f3f37a94d43497789156b0ded4d2f2dd5b89496 2022-09-26 Simon Marchi gdb/testsuite: use gdb_test in gdb.gdb/python-helper.exp If some command in there gives the wrong answer, we currently have to wait for a timeout for the test to continue. For instance, I currently see: print *val->type $1 = Python Exception : Cannot take address of method length. (outer-gdb) FAIL: gdb.gdb/python-helper.exp: pretty print type (timeout) We can avoid this and modernize the test at the same time by using the -prompt option of gdb_test. gdb_test_no_output currently accepts a -prompt_re option (the variable name passed to parse_args defines the option name), but I think it's a typo. It's supposed to be -prompt, like gdb_test. I can't find anything using -prompt_re using grep. Change it to just "prompt". Change-Id: Icc0a9a0ef482e62460c708bccdd544c11d711eca 2022-09-26 Simon Marchi gdb/testsuite: bump duration for the whole test in do_self_tests When running gdb.gdb/python-helper.exp, I get some timeouts: continue Continuing. print 1 FAIL: gdb.gdb/python-helper.exp: hit breakpoint in outer gdb (timeout) At this time, GDB is actually processing the stop and reading in some CUs. selftest_setup does bump the timeout, but it's not for the whole test. Since debugging GDB with GDB is (unfortunately) a bit slow, bump the timeout for the whole duration of the setup and body. On my optimized build, the command takes just a bit more than the current timeout of 10 seconds. But it's much slower if running the test on an unoptimized build, so I think it's necessary to bump the timeout for that in any case. Change-Id: I4d38285870e76c94f9d0bfdb60648a2e7f2cfa5d 2022-09-26 Clément Chigot binutils/testsuite: handle the different install names of c++filt c++filt is always named cxxfilt in a build directory, but in a install directory it would be named either cxxfilt or c++filt (depending on the host). Handle this last case in testsuite. binutils/ChangeLog: * testsuite/config/default.exp (CXXFILE): if cxxfilt not found, try c++filt. 2022-09-26 Clément Chigot binutils/testsuite: skip gentestdlls related tests if missing When launching the testsuite through runtest outside the build tree, gentestdlls might not be available, this binary being created by make check. Simply untested the related tests instead of crashing. binutils/ChangeLog: * testsuite/binutils-all/objdump.exp: Skip dotnet tests if gentestdlls is not available. 2022-09-26 Tom de Vries [gdb/testsuite] Fix gdb.dwarf2/dw2-unspecified-type-foo.c with -m32 When running test-case gdb.dwarf2/dw2-unspecified-type-foo.c with target board unix/-m32, I run into: ... (gdb) PASS: gdb.dwarf2/dw2-unspecified-type.exp: ptype foo p ((int (*) ()) foo) ()^M $1 = -135698472^M ... Add the missing "return 0" in foo, which fixes this. Tested on x86_64-linux. 2022-09-26 Alan Modra PR29613, use of uninitialized value in objcopy PR 29613 * elf.c (_bfd_elf_write_secondary_reloc_section): Trim sh_size back to relocs written. Use better types for vars. 2022-09-26 Alan Modra PR29542, PowerPC gold internal error in get_output_view, We were attempting to set a BSS style section contents. PR 29542 * powerpc.cc (Output_data_plt_powerpc::do_write): Don't set .plt, .iplt or .lplt section contents when position independent. 2022-09-26 Alan Modra stab nearest_line bfd_malloc_and_get_section bfd_malloc_and_get_section performs some sanity checks on the section size before allocating memory. This patch avails the stab nearest_line code of that sanity checking, and tidies up memory afterward. * coffgen.c (_bfd_coff_close_and_cleanup): Call _bfd_stab_cleanup. * elf.c (_bfd_elf_close_and_cleanup): Likewise. * syms.c (_bfd_stab_section_find_nearest_line): Set *pinfo earlier. Use bfd_malloc_and_get_section. Free malloc'd buffers on failure. Malloc indextable. (_bfd_stab_cleanup): New function. * libbfd-in.h (_bfd_stab_cleanup): Declare. * libbfd.h: Regnerate. 2022-09-26 Alan Modra PKG_CHECK_MODULES for msgpack and jansson Using AS_IF rather than shell "if" is recommended for conditionals that contain non-trivial autoconf macros, because autoconf will emit any AC_REQUIREd autoconf macro expansions outside of the conditional. This makes them available elsewhere in the configure script. binutils/ * configure.ac (msgpack): Use "AS_IF" rather than "if". * configure: Regenerate. ld/ * configure.ac (jansson): Use "AS_IF" rather than "if". * configure: Regenerate. 2022-09-26 GDB Administrator Automatic date update in version.in 2022-09-25 GDB Administrator Automatic date update in version.in 2022-09-24 Magne Hov gdb/source.c: Fix undefined behaviour dereferencing empty string When a source file's dirname is solely made up of directory separators we end up trying to dereference the last character of an empty string with std::string::back, which results in undefined behaviour. A typical use case where this can happen is when the root directory "/" is used as a compilation directory. With libstdc++.so.6.0.28 we get no out-of-bounds checks and the byte preceding the storage of the empty string is returned. The character value of this byte depends on heap implementation and usage, but when this byte happens to hold the value of the directory separator character we go on to call std::string::pop_back on the empty string which results in an out_of_range exception which terminates GDB. Fix this by using path_join. prepare_path_for_appending ensures that the filename component is relative. The testsuite has been run before and after the change and no regressions were found. 2022-09-24 Enze Li gdbserver: remove unused for loop In this commit, commit cf6c1e710ee162a5adb0ae47acb731f2bfecc956 Date: Mon Jul 11 20:53:48 2022 +0800 gdbserver: remove unused variable I removed an unused variable in handle_v_run. Pedro then pointed out that the for loop after it was also unused. After a period of smoke testing, no exceptions were found. Tested on x86_64-linux. 2022-09-24 Alan Modra The problem with warning in elf_object_p elfcode.h can emit three warnings in elf_object_p for various things, "section extending past end of file", "corrupt string table index", and "program header with invalid alignment". The problem with doing this is that the warning can be emitted for multiple possible targets as each one is tried. I was looking at a fuzzer testcase that had an object file with 6144 program headers, 5316 of which had invalid alignment. It would be bad enough to get 5316 messages all the same, but this object was contained in an archive and resulted in 4975776 repeats. Some trimming can be done by not warning if the bfd is already marked read_only, as is done for the "section extending past end of file" warning, but that still results in an unacceptable number of warnings for object files in archives. Besides that, it is just wrong to warn about a problem detected by a target elf_object_p other than the one that actually matches. At some point we might have more target specific warnings. So what to do? One obvious solution is to remove the warnings. Another is to poke any warning strings into the target xvec, emitting them if that xvec is the final one chosen. This also has the benefit of solving the archive problem. A warning when recursing into _bfd_check_format for the first element of the archive (to find the correct target for the archive) will still be on the xvec at the point that target is chosen for the archive. However, target xvecs are read-only. Thus the need for per_xvec_warn to logically extend bfd_target with a writable field. I've made per_xvec_warn one larger than bfd_target_vector to provide one place for user code that makes private copies of target xvecs. * elfcode.h (elf_swap_shdr_in, elf_object_p): Stash potential warnings in _bfd_per_xvec_warn location. * format.c (clear_warnmsg): New function. (bfd_check_format_matches): Call clear_warnmsg before trying a new xvec. Print warnings for the successful non-archive match. * targets.c: Include libiberty.h. (_bfd_target_vector_entries): Use ARRAY_SIZE. (per_xvec_warn): New. (_bfd_per_xvec_warn): New function. * Makefile.am (LIBBFD_H_FILES): Add targets.c. * Makefile.in: Regenerate. * libbfd.h: Regenerate. 2022-09-24 Alan Modra Re: bfd_cleanup for object_p Bits still missing from commit cb001c0d283d. * aoutx.h (aout_@var{size}_some_aout_object_p): Correct synopsis. * i386lynx.c (lynx_core_file_p): Correct return type. * ptrace-core.c (ptrace_unix_core_file_p): Likewise. 2022-09-24 GDB Administrator Automatic date update in version.in 2022-09-23 John Baldwin Support AT_USRSTACKBASE and AT_USRSTACKLIM. FreeBSD's kernel has recently added two new ELF auxiliary vector entries to describe the location of the user stack for the initial thread in a process. This change displays the proper name and description of these entries in 'info auxv'. 2022-09-23 Christoph Müllner RISC-V: Add Zawrs ISA extension support This patch adds support for the Zawrs ISA extension ("wrs.nto" and "wrs.sto" instructions). The specification can be found here: https://github.com/riscv/riscv-zawrs/blob/main/zawrs.adoc 2022-09-23 Simon Marchi gdb/testsuite/tui: start GDB with "set filename-display basename" The test gdb.tui/tui-missing-src.exp fails on my CI machine, and I concluded that it is caused by the long source directory name: /home/jenkins/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/src/binutils-gdb The long name causes some particular redrawing that doesn't happen for shorter directories, and causes a Term::command call to return too early. This can be reproduced by cloning the binutils-gdb repo in a directory with a name similar to the one shown above. $ pwd /home/simark/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd64/target_board/unix/src/binutils-gdb/build/gdb $ make check-read1 TESTS="gdb.tui/tui-missing-src.exp" FAIL: gdb.tui/tui-missing-src.exp: checking if inside f2 () FAIL: gdb.tui/tui-missing-src.exp: f2.c must be displayed in source window FAIL: gdb.tui/tui-missing-src.exp: check source box is empty after return FAIL: gdb.tui/tui-missing-src.exp: Back in main Note that using "make check" instead of "make check-read1" only shows the last 2 failures for me. When running gdb.tui/tui-missing-src.exp in a directory with a shorter name, the terminal looks like this by the time the "checking if inside f2" test runs: Screen Dump (size 80 columns x 24 rows, cursor at column 6, row 23): 0 +-...ld/binutils-gdb-noasan/gdb/testsuite/outputs/gdb.tui/tui-missing-src/f2.c-+ 1 | 1 | 2 | 2 int | 3 | 3 f2 (int x) | 4 | 4 { | 5 | > 5 x <<= 1; | 6 | 6 return x+5; | 7 | 7 } | 8 | 8 | 9 | 9 | 10 | 10 | 11 | 11 | 12 | 12 | 13 | 13 | 14 +------------------------------------------------------------------------------+ 15 multi-thre Thread 0x7ffff7cc07 In: f2 L5 PC: 0x555555555143 16 at /home/simark/build/binutils-gdb-noasan/gdb/testsuite/outputs/gdb.tui/tui- 17 missing-src/main.c:6 18 (gdb) next 19 (gdb) step 20 f2 (x=4) 21 at /home/simark/build/binutils-gdb-noasan/gdb/testsuite/outputs/gdb.tui/tui- 22 missing-src/f2.c:5 23 (gdb) PASS: gdb.tui/tui-missing-src.exp: checking if inside f2 () When running the `Term::command "step"` just before, GDB writes the "step", which makes the `wait_for` proc go in the "looking for the prompt" mode, to know when the command's execution is complete. As some new output appears, lines that must disappear are deleted using the "Delete Line" operation [1] and some new ones are drawn. The source window gets redrawn with the contents of the f2.c file. Then, GDB writes the prompt (at line 23 above), which satisfies `wait_for`, which then returns. The state of the terminal is therefore correct for the "check if inside f2" and "f2.c must be displayed in the source window" tests. In the non-working case, the terminal looks like this by the time the "check if inside f2" test runs: Screen Dump (size 80 columns x 24 rows, cursor at column 6, row 17): 0 +------------------------------------------------------------------------------+ 1 | | 2 | | 3 | | 4 | | 5 | | 6 | | 7 | [ No Source Available ] | 8 | | 9 | | 10 | | 11 | | 12 | | 13 | | 14 +------------------------------------------------------------------------------+ 15 multi-thre Thread 0x7ffff7cc1b In: main L7 PC: 0x555555555128 16 sing-src/main.c:6 17 (gdb) ary breakpoint 1, main () 18 at /home/simark/workspace/binutils-gdb_master_linuxbuild/platform/jammy-amd6 19 4/target_board/unix/src/binutils-gdb/build/gdb/testsuite/outputs/gdb.tui/tui-mis 20 sing-src/main.c:6 21 (gdb) next 22 (gdb) step 23 FAIL: gdb.tui/tui-missing-src.exp: checking if inside f2 () What happened is: GDB wrote the "step" command, which make the `wait_for` proc go in its "looking for the prompt" mode. However, curses decided to redraw whatever scrolled up to line 17 using some standard character insertion operations: +++ Cursor Down (1), cursor: (16, 0) -> (17, 0) +++ Inserting string '(' +++ Inserted char '(', cursor: (17, 0) -> (17, 1) +++ Inserted string '(', cursor: (17, 0) -> (17, 1) +++ Inserting string 'g' +++ Inserted char 'g', cursor: (17, 1) -> (17, 2) +++ Inserted string 'g', cursor: (17, 1) -> (17, 2) +++ Inserting string 'd' +++ Inserted char 'd', cursor: (17, 2) -> (17, 3) +++ Inserted string 'd', cursor: (17, 2) -> (17, 3) +++ Inserting string 'b' +++ Inserted char 'b', cursor: (17, 3) -> (17, 4) +++ Inserted string 'b', cursor: (17, 3) -> (17, 4) +++ Inserting string ')' +++ Inserted char ')', cursor: (17, 4) -> (17, 5) +++ Inserted string ')', cursor: (17, 4) -> (17, 5) +++ Inserting string ' ' +++ Inserted char ' ', cursor: (17, 5) -> (17, 6) +++ Inserted string ' ', cursor: (17, 5) -> (17, 6) And that causes `wait_for` to think the "step" command is complete. This is wrong, as the prompt at line 17 isn't the prompt drawn after the completion of the "step" command. The subsequent tests now run with a partially updated screen (what is shown above) and obviously fail. The ideal way to fix this would be for `wait_for` to be smarter, to avoid it confusing the different prompts drawn. However, I would also like to reduce the variations in TUI test results due to the directories (source and build) in which tests are ran. TUI tests are more prone to differences in test results due to variations in directory names than other tests, as it makes curses take different redrawing decisions. So in this patch, I propose to make TUI tests use "set filename-display basename", which makes GDB omit directory names when it prints file names. This way, regardless of where you run the tests, you should get the same results (all other things being equal). Doing this happens to fix my failures and makes my CI happy (which in turns makes me happy). To be clear, I understand that this does not fix the root issue of `proc wait_for` being confused. However, it makes TUI test runs be more similar for everyone, such that there's less chance of TUI tests randomly failing for somebody. If some other change triggers the `wait_for` problem again in the future, hopefully everybody will see the problem and we can work on getting it fixed more easily than if just one unlucky person sees the problem. Note that there are other reasons why TUI tests could vary, like different curses library versions taking different re-drawing decisions. However, I think my change is a good step towards more stable test results. [1] https://vt100.net/docs/vt510-rm/DL.html Change-Id: Ib18da83317e7b78a46f77892af0d2e39bd261bf5 2022-09-23 Jiangshuai Li gdb/csky add cskyv2-linux.xml for cskyv2-linux.c Add cskyv2-linux.xml for re-generating cskyv2-linux.c if needed. Also update cskyv2-linux.c. 2022-09-23 Alan Modra pdb: _bfd_generic_close_and_cleanup Every format that might appear inside a generic archive needs to call _bfd_generic_close_and_cleanup, so that the archive element lookup htab can be tidied on closing an element. Otherwise you get stale entries in the htab pointing at freed and perhaps reused memory, resulting in segfaults when the archive is closed. Calling _bfd_generic_close_and_cleanup on close means tdata needs to be set up too, since pdb claims to be of format bfd_archive. * pdb.c (pdb_close_and_cleanup): Define as _bfd_generic_close_and_cleanup. (pdb_archive_p): Set up tdata for bfd_archive format. 2022-09-23 Alan Modra Don't attempt to compress bss sections It doesn't make sense to try to compress a section without contents since those sections take no space on disk. Compression can only increase the disk image size. * coffgen.c (make_a_section_from_file): Exclude !SEC_HAS_CONTENTS sections from compression and decompression. * elf.c (_bfd_elf_make_section_from_shdr): Likewise. 2022-09-23 GDB Administrator Automatic date update in version.in 2022-09-22 Lancelot SIX gdb/testsuite/lib/future.exp: follow dejagnu default_target_compile GDB's testsuite can override dejagnu's default_target_compile if the system provided dejagnu installation does not provide support to compile languages GDB needs. Recent version of dejagnu (1.6.3, installed on RHEL-9) includes ba60272 "Establish a default C compiler by evaluating [find_gcc] if no other compiler is given."[1]. This commit removed calls such as `set_board_info compiler "[find_gcc]"` from the various baseboards and has default_target_compile call `find_gcc` itself to find a compiler if none was specified by the board description. On systems with dejagnu-1.6.3, if GDB's overrides is needed to support languages still unknown to dejagnu, we end up in the following situation: - The system board files do not set the C compiler anymore, - GDB's replacement for default_target_compile assumes that the compiler should have been set up by the board file. In this situation, no one sets the C compiler for the board and as a result many test are not compiled and not executed: [...] Running .../gdb/testsuite/gdb.base/bt-on-error-and-warning.exp ... gdb compile failed, default_target_compile: No compiler to compile with Running .../gdb/testsuite/gdb.base/dprintf-non-stop.exp ... gdb compile failed, default_target_compile: No compiler to compile with Running .../gdb/testsuite/gdb.base/structs3.exp ... gdb compile failed, default_target_compile: No compiler to compile with [...] We are observing this error with ROCgdb[2], a downstream port of GDB supporting AMD GPUs. This port needs to use GDB's override of default_target_compile to compile HIP programs since dejagnu does not provide support for this language yet. This patch changes gdb_default_target_compile_1 in a similar way default_target_compile has been updated so both implementations remain compatible. Even if this is not strictly required by GDB just yet, I believe keeping both implementations in sync desirable. Using board files provided with dejagnu <=1.6.2 is still supported: if the compiler is set by the board file, gdb_default_target_compile_1 uses it and does not need `find_gcc`. Patch tested on x86_64 RHEL-9 and ubuntu-20.04 on top of GDB and ROCgdb. [1] http://git.savannah.gnu.org/gitweb/?p=dejagnu.git;a=commit;h=ba60272a5ac6f6a7012acca03f596a6ed003f044 [2] https://github.com/ROCm-Developer-Tools/ROCgdb Change-Id: Ibff52684d9cab8243a7c6748ecbd29f50c37e669 2022-09-22 Christoph Müllner RISC-V: Add T-Head MemPair vendor extension T-Head has a range of vendor-specific instructions. Therefore it makes sense to group them into smaller chunks in form of vendor extensions. This patch adds the XTheadMemPair extension, a collection of T-Head specific two-GP-register memory operations. The 'th' prefix and the "XTheadMemPair" extension are documented in a PR for the RISC-V toolchain conventions ([1]). [1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19 Co-developed-by: Lifang Xia 2022-09-22 Christoph Müllner RISC-V: Add support for literal instruction arguments This patch introduces support for arbitrary literal instruction arguments, that are not encoded in the opcode. A typical use case for this feature would be an instruction that applies an implicit shift by a constant value on an immediate (that is a real operand). With this patch it is possible to make this shift visible in the dissasembly and support such artificial parameter as part of the asssembly code. Co-developed-by: Lifang Xia 2022-09-22 Christoph Müllner RISC-V: Add T-Head MemIdx vendor extension T-Head has a range of vendor-specific instructions. Therefore it makes sense to group them into smaller chunks in form of vendor extensions. This patch adds the XTheadMemIdx extension, a collection of T-Head specific GPR memory access instructions. The 'th' prefix and the "XTheadMemIdx" extension are documented in a PR for the RISC-V toolchain conventions ([1]). In total XTheadCmo introduces the following 44 instructions (BU,HU,WU only for loads (zero-extend instead of sign-extend)): * {L,S}{D,W,WU,H,HU,B,BU}{IA,IB} rd, rs1, imm5, imm2 * {L,S}R{D,W,WU,H,HU,B,BU} rd, rs1, rs2, imm2 * {L,S}UR{D,W,WU,H,HU,B,BU} rd, rs1, rs2, imm2 [1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19 Co-developed-by: Lifang Xia 2022-09-22 Christoph Müllner RISC-V: Add T-Head FMemIdx vendor extension T-Head has a range of vendor-specific instructions. Therefore it makes sense to group them into smaller chunks in form of vendor extensions. This patch adds the XTheadFMemIdx extension, a collection of T-Head-specific floating-point memory access instructions. The 'th' prefix and the "XTheadFMemIdx" extension are documented in a PR for the RISC-V toolchain conventions ([1]). [1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19 Co-developed-by: Lifang Xia 2022-09-22 Christoph Müllner RISC-V: Add T-Head MAC vendor extension T-Head has a range of vendor-specific instructions. Therefore it makes sense to group them into smaller chunks in form of vendor extensions. This patch adds the XTheadMac extension, a collection of T-Head-specific multiply-accumulate instructions. The 'th' prefix and the "XTheadMac" extension are documented in a PR for the RISC-V toolchain conventions ([1]). [1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19 Co-developed-by: Lifang Xia 2022-09-22 Christoph Müllner RISC-V: Add T-Head CondMov vendor extension T-Head has a range of vendor-specific instructions. Therefore it makes sense to group them into smaller chunks in form of vendor extensions. This patch adds the XTheadCondMov extension, a collection of T-Head-specific conditional move instructions. The 'th' prefix and the "XTheadCondMov" extension are documented in a PR for the RISC-V toolchain conventions ([1]). [1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19 Co-developed-by: Lifang Xia 2022-09-22 Christoph Müllner RISC-V: Add T-Head Bitmanip vendor extension T-Head has a range of vendor-specific instructions. Therefore it makes sense to group them into smaller chunks in form of vendor extensions. This patch adds the XThead{Ba,Bb,Bs} extensions, a collection of T-Head-specific bitmanipulation instructions. The 'th' prefix and the "XThead{Ba,Bb,Bs}" extension are documented in a PR for the RISC-V toolchain conventions ([1]). [1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19 Co-developed-by: Lifang Xia 2022-09-22 Christoph Müllner RISC-V: Add support for arbitrary immediate encoding formats This patch introduces support for arbitrary signed or unsigned immediate encoding formats. The formats have the form "XsN@S" and "XuN@S" with N being the number of bits and S the LSB position. For example an immediate field of 5 bytes that encodes a signed value and is stored in the bits 24-20 of the instruction word can use the format specifier "Xs5@20". Co-developed-by: Lifang Xia 2022-09-22 Christoph Müllner RISC-V: Add T-Head SYNC vendor extension T-Head has a range of vendor-specific instructions. Therefore it makes sense to group them into smaller chunks in form of vendor extensions. This patch adds the XTheadSync extension, a collection of T-Head-specific multi-processor synchronization instructions. The 'th' prefix and the "XTheadSync" extension are documented in a PR for the RISC-V toolchain conventions ([1]). [1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19 Co-developed-by: Lifang Xia 2022-09-22 Christoph Müllner RISC-V: Add T-Head CMO vendor extension T-Head has a range of vendor-specific instructions. Therefore it makes sense to group them into smaller chunks in form of vendor extensions. This patch adds the XTheadCmo extension, a collection of T-Head specific cache management operations. The 'th' prefix and the "XTheadCmo" extension are documented in a PR for the RISC-V toolchain conventions ([1]). In total XTheadCmo introduces the following 21 instructions: * DCACHE.{C,CI,I}ALL * DCACHE.{C,CI,I}{PA,VA,SW} rs1 * DCACHE.C{PAL1,VAL1} rs1 * ICACHE.I{ALL,ALLS} * ICACHE.I{PA,VA} rs1 * L2CACHE.{C,CI,I}ALL Contrary to Zicbom, the XTheadCmo instructions don't have a constant displacement, therefore we have a different syntax for the arguments. To clarify this is intended behaviour, there is a set of negative test for Zicbom-style arguments in x-thead-cmo-fail.s. [1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19 v2: - Add missing DECLARE_INSN() list - Fix ordering Co-developed-by: Lifang Xia 2022-09-22 Christoph Müllner RISC-V: Add generic support for vendor extensions This patch introduces changes that allow the integration of vendor ISA extensions: * Define a list of vendor extensions (riscv_supported_vendor_x_ext) where vendor extensions can be added * Introduce a section with a table in the documentation where vendor extensions can be added To add a vendor extension that consists of instructions only, the following things need to be done: * Add the extension to the riscv_supported_vendor_x_ext list * Add lookup entry in riscv_multi_subset_supports * Documenting the extension in c-riscv.texti * Add test cases for all instructions * Add MATCH*/MASK* constants and DECLARE_INSN() for all instructions * Add new instruction class to enum riscv_insn_class * Define the instructions in riscv_opcodes * Additional changes if necessary (depending on the instructions) Co-developed-by: Lifang Xia 2022-09-22 Tom de Vries [gdb/symtab] Add all_comp_units/all_type_units views on all_units Add all_comp_units/all_type_units views on all_units. Having the views allows us to: - easily get the number of CUs or TUs in all_units, and - easily access the nth CU or TU. This minimizes the use of tu_stats.nr_tus. Tested on x86_64-linux. 2022-09-22 Tom de Vries [gdb/symtab] Rename all_comp_units to all_units Mechanically rename all_comp_units to all_units: ... $ sed -i 's/all_comp_units/all_units/' gdb/dwarf2/* ... Tested on x86_64-linux. 2022-09-22 Yoshinori Sato opcodes: SH fix bank register disassemble. * sh-dis.c (print_insn_sh): Enforce bit7 of LDC Rm,Rn_BANK and STC Rm_BANK,Rn is always 1. 2022-09-22 Tsukasa OI include: Add macro to ignore -Wunused-but-set-variable "-Wunused-but-set-variable" warning option can be helpful to track variables that are written but not read thereafter. But it can be harmful if some of the code is auto-generated and we have no ways to deal with it. The particular example is Bison-generated code. The new DIAGNOSTIC_IGNORE_UNUSED_BUT_SET_VARIABLE macro can be helpful on such cases. A typical use of this macro is to place this macro before the end of user prologues on Bison (.y) files. include/ChangeLog: * diagnostics.h (DIAGNOSTIC_IGNORE_UNUSED_BUT_SET_VARIABLE): New. 2022-09-22 Tsukasa OI include: Add macro to ignore -Wuser-defined-warnings User-defined warnings (on Clang, "-Wuser-defined-warnings") can be harmful if we have specified "-Werror" and we have no control to disable the warning ourself. The particular example is Gnulib. Gnulib generates a warning if the system version of certain functions are used (to redirect the developer to use Gnulib version). However, it can be harmful if we cannot easily replace them (e.g. the target is in the standard C++ library). The new DIAGNOSTIC_IGNORE_USER_DEFINED_WARNINGS macro can be helpful on such cases. A typical use of this macro is to place this macro before including certain system headers. include/ChangeLog: * diagnostics.h (DIAGNOSTIC_IGNORE_USER_DEFINED_WARNINGS): New. 2022-09-22 Andrew Burgess gdb/python: restrict the names accepted by gdb.register_window_type I noticed that, from Python, I could register a new TUI window that had whitespace in its name, like this: gdb.register_window_type('my window', MyWindowType) however, it is not possible to then use this window in a new TUI layout, e.g.: (gdb) tui new-layout foo my window 1 cmd 1 Unknown window "my" (gdb) tui new-layout foo "my window" 1 cmd 1 Unknown window ""my" (gdb) tui new-layout foo my\ window 1 cmd 1 Unknown window "my\" GDB clearly uses the whitespace to split the incoming command line. I could fix this by trying to add a mechanism by which we can use whitespace within a window name, but it seems like an easier solution if we just forbid whitespace within a window name. Not only is this easier, but I think this is probably the better solution, identifier names with spaces in would mean we'd need to audit all the places a window name could be printed and ensure that the use of a space didn't make the output ambiguous. So, having decided to disallow whitespace, I then thought about other special characters. We currently accept anything as a window name, and I wondered if this was a good idea. My concerns were about how special characters used in a window name might cause confusion, for example, we allow '$' in window names, which is maybe fine now, but what if one day we wanted to allow variable expansion when creating new layouts? Or what about starting a window name with '-'? We already support a '-horizontal' option, what if we want to add more in the future? Or use of the special character '{' which has special meaning within a new layout? In the end I figured it might make sense to place some restrictive rules in place, and then relax the rules later if/when users complain, we can consider each relaxation as its requested. So, I propose that window names should match this regular expression: [a-zA-Z][-_.a-zA-Z0-9]* There is a chance that there is user code in the wild which will break with the addition of this change, but hopefully adapting to the new restrictions shouldn't be too difficult. 2022-09-22 Bruno Larsen gdb/testsuite: Add test to step through function epilogue The testsuite implicitly tests GDB's ability to step through epilogues in multiple tests, without doing it explicitly anywhere. This is unfortunate, as clang does not emit epilogue information, so using clang on our testsuite makes many tests fail. This patch adds a central, explicit test for walking through the epilogue so we can safely remove this from other tests and have them working with clang. The test created attempts to step through a simple epilogue, an epilogue that ends on another epilogue, and epilogues leading to other function calls. 2022-09-22 Bruno Larsen gdb.base/skip.exp: Use finish to exit functions gdb.base/skip.exp was making use of a fixed number of step commands to exit some functions. This caused some problems when using clang to test GDB, as GDB would need fewer steps to reach the desired spots. For instance, when testing in the section "step after disabling 3", the log looks like this: Breakpoint 4, main () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:32 32 x = baz ((bar (), foo ())); (gdb) step bar () at binutils-gdb/gdb/testsuite/gdb.base/skip1.c:21 21 return 1; (gdb) PASS: gdb.base/skip.exp: step after disabling 3: step 1 step foo () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:42 42 return 0; (gdb) PASS: gdb.base/skip.exp: step after disabling 3: step 2 step main () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:34 34 test_skip_file_and_function (); (gdb) step test_skip_file_and_function () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:59 59 test_skip (); (gdb) FAIL: gdb.base/skip.exp: step after disabling 3: step 3 step test_skip () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:48 48 } (gdb) PASS: gdb.base/skip.exp: step after disabling 3: step 4 step test_skip_file_and_function () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:60 60 skip1_test_skip_file_and_function (); (gdb) FAIL: gdb.base/skip.exp: step after disabling 3: step 5 This shows that the feature is working but because the inferior lands in a different location, it registers as a failure. Seeing as along with this difference, there are also some differences that depend on gcc versions (where gdb might stop back at line 32 before entering foo), it would not be easy to test for this behavior using steps and analzing where the inferior stops at each point. On the other hand, using gdb_step_until is not feasible because we'd possibly gloss over stepping into baz and rendering the whole test useless. Instead, skip.exp now uses finish to leave functions, synchronizing through compilers and compiler versions. Some test names were also changed to be a bit more descriptive. The new log looks like this, independently of compiler used: Breakpoint 4, main () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:32 32 x = baz ((bar (), foo ())); (gdb) step bar () at binutils-gdb/gdb/testsuite/gdb.base/skip1.c:21 21 return 1; (gdb) PASS: gdb.base/skip.exp: step after disabling 3: step into bar finish Run till exit from #0 bar () at binutils-gdb/gdb/testsuite/gdb.base/skip1.c:21 main () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:32 32 x = baz ((bar (), foo ())); Value returned is $2 = 1 (gdb) PASS: gdb.base/skip.exp: step after disabling 3: return from bar step foo () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:42 42 return 0; (gdb) PASS: gdb.base/skip.exp: step after disabling 3: step into foo finish Run till exit from #0 foo () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:42 main () at binutils-gdb/gdb/testsuite/gdb.base/skip.c:32 32 x = baz ((bar (), foo ())); Value returned is $3 = 0 (gdb) PASS: gdb.base/skip.exp: step after disabling 3: Return from foo step 34 test_skip_file_and_function (); (gdb) PASS: gdb.base/skip.exp: step after disabling 3: step and skip baz 2022-09-22 Bruno Larsen fix gdb.base/jit-elf.exp when testing with clang When using clang as the compiler for the target, gdb.base/jit-elf.exp was failing because the filename displayed when GDB attached to the inferior was only showing up as with a relative path, like so: (gdb) attach 3674146 Attaching to program: /home/blarsen/Documents/gdb-build/gdb/testsuite/outputs/gdb.base/jit-elf/jit-elf-main, process 3674146 Reading symbols from /lib64/libm.so.6... Reading symbols from .gnu_debugdata for /lib64/libm.so.6... (No debugging symbols found in .gnu_debugdata for /lib64/libm.so.6) Reading symbols from /lib64/libc.so.6... (No debugging symbols found in /lib64/libc.so.6) Reading symbols from /lib64/ld-linux-x86-64.so.2... [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". 0x00000000004013ff in main (argc=3, argv=0x7fffffffd820) at ../../../common/git-repos/binutils-gdb/gdb/testsuite/gdb.base/jit-elf-main.c:118 118| WAIT_FOR_GDB; i = 0; /* gdb break here 1 */ (gdb) FAIL: gdb.base/jit-elf.exp: attach: one_jit_test-2: break here 1: attach While gcc's output is as follows: (gdb) attach 3592961 Attaching to program: /home/blarsen/Documents/gdb-build/gdb/testsuite/outputs/gdb.base/jit-elf/jit-elf-main, process 3592961 Reading symbols from /lib64/libm.so.6... Reading symbols from .gnu_debugdata for /lib64/libm.so.6... (No debugging symbols found in .gnu_debugdata for /lib64/libm.so.6) Reading symbols from /lib64/libc.so.6... (No debugging symbols found in /lib64/libc.so.6) Reading symbols from /lib64/ld-linux-x86-64.so.2... [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". main (argc=3, argv=0x7fffffffd860) at /home/blarsen/Documents/gdb-build/gdb/testsuite/../../../common/git-repos/binutils-gdb/gdb/testsuite/gdb.base/jit-elf-main.c:118 118| WAIT_FOR_GDB; i = 0; /* gdb break here 1 */ (gdb) PASS: gdb.base/jit-elf.exp: attach: one_jit_test-2: break here 1: attach This difference only happens when GDB's configure is ran using a relative path, but seeing as testing the full path is not important for this specific test, it feels worth fixing anyway. To fix the false positive, the regexp for checking where gdb has stopped was relaxed a little to allow the relative path. 2022-09-22 Bruno Larsen gdb/testsuite: fix gdb.base/msym-bp-shl when running with Clang When trying to test gdb.base/msym-bp-shl.exp using clang, it would have many failures because one of the version of the foo function was being optimized away. Adding __attribute__ ((used)) to it fixed this. 2022-09-22 Bruno Larsen gdb/testsuite: fix testing gdb.base/skip-inline.exp with clang When testing gdb.base/skip-inline.exp using clang, we get failures when trying to step out of functions, since clang requires one fewer step when compared to gcc. The inferior gets increasingly out of sync as the test continues because of this difference, which generates those failures. This commit fixes this by switching those hardcoded steps to gdb_step_until, to guarantee that the inferior is always synced to what the test expects. This approach does not work for the parts that use step 2 or step 3, so when we identify that clang is being used, those tests are skipped. 2022-09-22 Bruno Larsen Change gdb.base/skip-solib.exp deal with lack of epilogue information When running gdb.base/skip-solib.exp, the backtrace tests could fail with compilers that associated epilogue instructions with the last statement line of the function, instead of associating it with the closing brace, despite the feature being fully functional. As an example, when testing skipping the function square, the testsuite would show Breakpoint 1, main () at (...)/binutils-gdb/gdb/testsuite/gdb.base/skip-solib-main.c:5 5 return square(0); (gdb) step 0x00007ffff7cef560 in __libc_start_call_main () from /lib64/libc.so.6 (gdb) PASS: gdb.base/skip-solib.exp: ignoring solib file: step bt #0 0x00007ffff7cef560 in __libc_start_call_main () from /lib64/libc.so.6 #1 0x00007ffff7cef60c in __libc_start_main_impl () from /lib64/libc.so.6 #2 0x0000000000401065 in _start () (gdb) FAIL: gdb.base/skip-solib.exp: ignoring solib file: bt Which means that the feature is working, the testsuite is just mis-identifying it. To avoid this problem, the skipped function calls have been sent to a line before `return`, so epilogues won't factor in. 2022-09-22 Bruno Larsen gdb/testsuite: Add a proc to test where compiler links the epilogue Different compilers link the epilogue of functions to different lines. As an example, gcc links it to the closing brace of the function, whereas clang links it to the last statement of the function. This difference is important for the testsuite, since the where GDB will land after a step can be wildly different. Where possible, this dependency should be side-stepped in the testsuite, but it isn't always possible, so this commit adds a gdb_caching_proc that is able to detect where the epilogue is linked, so tests can react accordingly. 2022-09-22 Clément Chigot ld/testsuite: allow to force another directory for gcc linker Add a new variable "ld_testsuite_tmpdir" to enable manual configuration of the -B flag added to gcc calls. This flag ensure that gcc is invoking the linker and the assembler we want to test. When launching the testsuite outside of the build tree, the links made by the testsuite in tmpdir/ld will point to nothing. Thus, even with the PATH correctly setup towards the linker directory, gcc might end up falling back to its default linker. Hence this variable to ensure that gcc, whatever happens, is using the linker we want. ld/ChangeLog: * testsuite/config/default.exp: Allow to change -B flag with ld_testsuite_bindir variable. 2022-09-22 Clément Chigot ld/testsuite: skip bootstrap.exp when OFILES are missing OFILES are normally provided through an environment variable set by Makefiles. However, when launching the testsuite directly through runtest outside the build tree, it can be hard to retrieve them. Thus, they can be missing. Instead of letting tcl raise an error when trying to access this OFILES variable, skip bootstrap.exp if it doesn't exist. ld/ChangeLog: * testsuite/ld-bootstrap/bootstrap.exp: Skip if OFILES is missing 2022-09-22 Tsukasa OI RISC-V: Remove "b" operand type from disassembler There are a few operand types not used by any RISC-V instructions. - Cx - Vf - Ve - [ - ] - b But most of them has a reasoning to keep them: - Cx : Same as "Ct" except it has a constraint to have rd == rs2 (similar to "Cw"). Although it hasn't used, its role is clear enough to implement a new instruction with this operand type. - Vf, Ve : Used by vector AMO instructions (not ratified and real instructions are not upstreamed yet). - [, ] : Unused tokenization symbols. Reserving them is not harmful and a vendor may use this symbol for special purposes. ... except "b". I could not have found any reference to this operand type except it works like the "s" operand type. Historically, it seems... it's just unused from the beginning. Its role is not clear either. On such cases, we should vacate this room for the new operand type with much clearer roles. opcodes/ChangeLog: * riscv-dis.c (print_insn_args): Remove 'b' operand type. 2022-09-22 Tsukasa OI RISC-V: Add macro-only operands to validate_riscv_insn Although they are not (and should not be) reachable, following macro-only operands are parsed in the `validate_riscv_insn' function and ignored. That function also notes that they are macro-only. - "A" - "B" - "I" Following this convention, this commit adds three remaining macro-only operands to this function. By doing this, we could instead choose to reject those operands from appearing in regular instructions later. - "c" (used by call, tail and jump macros) - "VM" (used by vmsge.vx and vmsgeu.vx macros) - "VT" (likewise) gas/ChangeLog: * config/tc-riscv.c (validate_riscv_insn): Add "c", "VM" and "VT" macro-only operand types. 2022-09-22 Vladimir Mezentsev gprofng: fix -Wduplicated-cond warning gprofng/ChangeLog 2022-09-21 Vladimir Mezentsev * src/collctrl.cc: Fix -Wduplicated-cond warning. 2022-09-22 GDB Administrator Automatic date update in version.in 2022-09-21 Alan Modra bfd BLD-POTFILES.in dependencies A file that consists of a list of files doesn't depend on those files being built. This patch came from trying to avoid a maintainer-mode make -j bug, where the recipe for targmatch.h was being run twice in parallel. Typical output shown below. make[2]: Entering directory '/build/gas/all/bfd' GEN bfdver.h GEN elf32-target.h GEN elf64-target.h GEN targmatch.h Making info in po make[3]: Entering directory '/build/gas/all/bfd/po' cd .. && make po/SRC-POTFILES.in cd .. && make po/BLD-POTFILES.in make[4]: Entering directory '/build/gas/all/bfd' GEN elf32-aarch64.c GEN elf64-aarch64.c GEN elf32-ia64.c GEN elf64-ia64.c GEN elf32-loongarch.c GEN elf64-loongarch.c GEN elf32-riscv.c GEN elf64-riscv.c GEN peigen.c GEN pepigen.c GEN pex64igen.c GEN pe-aarch64igen.c GEN targmatch.h make[4]: Entering directory '/build/gas/all/bfd' CCLD doc/chew.stamp mv: cannot stat 'targmatch.new': No such file or directory make[4]: *** [Makefile:2325: targmatch.h] Error 1 * Makefile.am (po/BLD-POTFILES.in): Don't depend on $(BLD_POTFILES). (po/SRC-POTFILES.in): Don't depend on $(SRC_POTFILES). 2022-09-21 Simon Marchi gdbsupport: move fileio_errno_to_host to fileio.{h,cc} and rename gdb_bfd.c and remote.c contain identical implementations of a fileio_error -> errno function. Factor that out to gdbsupport/fileio.{h,cc}. Rename it fileio_error_to_host, for symmetry with host_to_fileio_error. Change-Id: Ib9b8807683de2f809c94a5303e708acc2251a0df 2022-09-21 Simon Marchi gdbsupport: convert FILEIO_* macros to an enum Converting from free-form macros to an enum gives a bit of type-safety. This caught places where we would assign host error numbers to what should contain a target fileio error number, for instance in target_fileio_pread. I added the FILEIO_SUCCESS enumerator, because remote.c:remote_hostio_parse_result initializes the remote_errno output variable to 0. It seems better to have an explicit enumerator than to assign a value for which there is no enumerator. I considered initializing this variable to FILEIO_EUNKNOWN instead, such that if the remote side replies with an error and omits the errno value, we'll get an errno that represents an error instead of 0 (which reprensents no error). But it's not clear what the consequences of that change would be, so I prefer to err on the side of caution and just keep the existing behavior (there is no intended change in behavior with this patch). Note that remote_hostio_parse_resul still reads blindly what the remote side sends as a target errno into this variable, so we can still end up with a nonsensical value here. It's not good, but out of the scope of this patch. Convert host_to_fileio_error and fileio_errno_to_host to return / accept a fileio_error instead of an int, and cascade the change in the whole chain that uses that. Change-Id: I454b0e3fcf0732447bc872252fa8e57d138b0e03 2022-09-21 Simon Marchi gdbsupport: move include/gdb/fileio.h contents to fileio.h I don't see why include/gdb/fileio.h is placed there. It's not installed by "make install", and it's not included by anything outside of gdb/gdbserver/gdbsupport. Move its content back to gdbsupport/fileio.h. I have omitted the bits inside an `#if 0`, since it's obviously not used, as well as the "limits" constants, which are also unused. Change-Id: I6fbc2ea10fbe4cfcf15f9f76006b31b99c20e5a9 2022-09-21 Simon Marchi gdbsupport: change path_join parameter to array_view When a GDB built with -D_GLIBCXX_DEBUG=1 reads a binary with a single character name, we hit this assertion failure: $ ./gdb -q --data-directory=data-directory -nx ./x /usr/include/c++/12.1.0/string_view:239: constexpr const std::basic_string_view<_CharT, _Traits>::value_type& std::basic_string_view<_CharT, _Traits>::operator[](size_type) const [with _CharT = char; _Traits = std::char_traits; const_reference = const char&; size_type = long unsigned int]: Assertion '__pos < this->_M_len' failed. The backtrace: #3 0x00007ffff6c0f002 in std::__glibcxx_assert_fail (file=, line=, function=, condition=) at /usr/src/debug/gcc/libstdc++-v3/src/c++11/debug.cc:60 #4 0x000055555da8a864 in std::basic_string_view >::operator[] (this=0x7fffffffcc30, __pos=1) at /usr/include/c++/12.1.0/string_view:239 #5 0x00005555609dcb88 in path_join[abi:cxx11](gdb::array_view > const>) (paths=...) at /home/simark/src/binutils-gdb/gdbsupport/pathstuff.cc:203 #6 0x000055555e0443f4 in path_join () at /home/simark/src/binutils-gdb/gdb/../gdbsupport/pathstuff.h:84 #7 0x00005555609dc336 in gdb_realpath_keepfile[abi:cxx11](char const*) (filename=0x6060000a8d40 "/home/simark/build/binutils-gdb-one-target/gdb/./x") at /home/simark/src/binutils-gdb/gdbsupport/pathstuff.cc:122 #8 0x000055555ebd2794 in exec_file_attach (filename=0x7fffffffe0f9 "./x", from_tty=1) at /home/simark/src/binutils-gdb/gdb/exec.c:471 #9 0x000055555f2b3fb0 in catch_command_errors (command=0x55555ebd1ab6 , arg=0x7fffffffe0f9 "./x", from_tty=1, do_bp_actions=false) at /home/simark/src/binutils-gdb/gdb/main.c:513 #10 0x000055555f2b7e11 in captured_main_1 (context=0x7fffffffdb60) at /home/simark/src/binutils-gdb/gdb/main.c:1209 #11 0x000055555f2b9144 in captured_main (data=0x7fffffffdb60) at /home/simark/src/binutils-gdb/gdb/main.c:1319 #12 0x000055555f2b9226 in gdb_main (args=0x7fffffffdb60) at /home/simark/src/binutils-gdb/gdb/main.c:1344 #13 0x000055555d938c5e in main (argc=5, argv=0x7fffffffdcf8) at /home/simark/src/binutils-gdb/gdb/gdb.c:32 The problem is this line in path_join: gdb_assert (strlen (path) == 0 || !IS_ABSOLUTE_PATH (path)); ... where `path` is "x". IS_ABSOLUTE_PATH eventually calls HAS_DRIVE_SPEC_1: #define HAS_DRIVE_SPEC_1(dos_based, f) \ ((f)[0] && ((f)[1] == ':') && (dos_based)) This macro accesses indices 0 and 1 of the input string. However, `f` is a string_view of length 1, so it's incorrect to try to access index 1. We know that the string_view's underlying object is a null-terminated string, so in practice there's no harm. But as far as the string_view is concerned, index 1 is considered out of bounds. This patch makes the easy fix, that is to change the path_join parameter from a vector of to a vector of `const char *`. Another solution would be to introduce a non-standard gdb::cstring_view class, which would be a view over a null-terminated string. With that class, it would be correct to access index 1, it would yield the NUL character. If there is interest in having this class (it has been mentioned a few times in the past) I can do it and use it here. This was found by running tests such as gdb.ada/arrayidx.exp, which produce 1-char long filenames, so adding a new test is not necessary. Change-Id: Ia41a16c7243614636b18754fd98a41860756f7af 2022-09-21 Simon Marchi gdb: remove TYPE_LENGTH Remove the macro, replace all uses with calls to type::length. Change-Id: Ib9bdc954576860b21190886534c99103d6a47afb 2022-09-21 Simon Marchi gdb: add type::length / type::set_length Add the `length` and `set_length` methods on `struct type`, in order to remove the `TYPE_LENGTH` macro. In this patch, the macro is changed to use the getter, so all the call sites of the macro that are used as a setter are changed to use the setter method directly. The next patch will remove the macro completely. Change-Id: Id1090244f15c9856969b9be5006aefe8d8897ca4 2022-09-21 Simon Marchi gdb: remove TYPE_TARGET_TYPE Remove the macro, replace all uses by calls to type::target_type. Change-Id: Ie51d3e1e22f94130176d6abd723255282bb6d1ed 2022-09-21 Simon Marchi gdb: add type::target_type / type::set_target_type Add the `target_type` and `set_target_type` methods on `struct type`, in order to remove the `TYPE_TARGET_TYPE` macro. In this patch, the macro is changed to use the getter, so all the call sites of the macro that are used as a setter are changed to use the setter method directly. The next patch will remove the macro completely. Change-Id: I85ce24d847763badd34fdee3e14b8c8c14cb3161 2022-09-21 Tsukasa OI RISC-V: Fix riscv_set_tso declaration To avoid -Werror=strict-prototypes, this commit changes () to (void). This is because "()" possibly means a function prototype with indeterminate arguments on old C standards. gas/ChangeLog: * config/tc-riscv.c (riscv_set_tso): Fix declaration. 2022-09-21 Alan Modra PR29566, objdump -p considers an empty .gnu.version_r invalid Allow and ignore an empty section. PR 29566 * elf.c (bfd_section_from_shdr): Don't set elf_dynverdef or elf_dynverref for empty sections. (_bfd_elf_slurp_version_tables): Remove now redundant tests. 2022-09-21 Tsukasa OI RISC-V: Set EF_RISCV_TSO also on .option arch This is a minor fix to commit 96462b012988d35ebb1137a2ad9fd0a96547d79a ("RISC-V: Implement Ztso extension"). Currently, it sets EF_RISCV_TSO ELF flag when initial ISA string contains the 'Ztso' extension. However, GAS has a way to update the ISA string: ".option arch". When the architecture is updated by ".option arch", EF_RISCV_RVC ELF flag is set when the 'C' extension is detected. Analogously, this commit sets the EF_RISCV_TSO when the 'Ztso' extension is detected. gas/ChangeLog: * config/tc-riscv.c (s_riscv_option): Set TSO ELF flag if the 'Ztso' extension is specified via ".option arch" directive. 2022-09-21 Alan Modra PR29573, addr2line doesn't display file/line for local symbols The DWARF standard is clear that DW_AT_linkage_name is optional. Compilers may not provide the attribute on functions and variables, even though the language mangles names. g++ does not for local variables and functions. Without DW_AT_linkage_name, mangled object file symbols can't be directly matched against the source-level DW_AT_name in DWARF info. One possibility is demangling the object file symbols, but that comes with its own set of problems: 1) A demangler might not be available for the compiler/language. 2) Demangling doesn't give the source function name as stored in DW_AT_name. Class and template parameters must be stripped at least. So this patch takes a simpler approach. A symbol matches DWARF info if the DWARF address matches the symbol address, and if the symbol name contains the DWARF name as a sub-string. Very likely the name matching is entirely superfluous. PR 29573 * dwarf.c (lookup_symbol_in_function_table): Match a symbol containing the DWARF source name as a substring. (lookup_symbol_in_variable_table): Likewise. (_bfd_dwarf2_find_nearest_line_with_alt): If stash_find_line_fast returns false, fall back to comp_unit_find_line. 2022-09-21 Alan Modra dwarf2.c: simplify best_fit_len tests * dwarf2.c (lookup_address_in_function_table): Simplify best_fit_len test. (info_hash_lookup_funcinfo): Likewise. (lookup_symbol_in_function_table): Likewise, also reorder tests and check "file" is set. (lookup_symbol_in_variable_table): Reorder tests. 2022-09-21 Alan Modra dwarf2.c: mangle_style non_mangled incorrectly returned "true" for Ada. Correct that, and add a few more non-mangled entries. Return a value suitable for passing to cplus_demangle to control demangling. * dwarf2.c: Include demangle.h. (mangle_style): Rename from non_mangled. Return DMGL_* value to suit lang. Adjust all callers. 2022-09-21 Alan Modra dwarf2.c remove varinfo and funcinfo sec field The "sec" field in these structures is only set and used in lookup functions. It always starts off as NULL. So the only possible effect of the field is to modify the return of the lookup, which was its purpose back in 2005 when HJ fixed PR990. Since then we solved the problem of relocatable object files with the fix for PR2338, so this field is now redundant. * dwarf.c (struct funcinfo, struct varinfo): Remove "sec" field. (lookup_symbol_in_function_table): Don't set or test "sec". (lookup_symbol_in_variable_table): Likewise. (info_hash_lookup_funcinfo, info_hash_lookup_varinfo): Likewise. 2022-09-21 Tsukasa OI configure: Pass CPPFLAGS_FOR_BUILD to subdirs Because CPPFLAGS_FOR_BUILD is used in some subdirectories (through bfd/warning.m4), not AC_SUBSTing the variable causes minor issues. Fortunately, it didn't cause severe errors but error messages related to @CPPFLAGS_FOR_BUILD@ (not AC_SUBSTed CPPFLAGS_FOR_BUILD variable passed to subdirectories through Makefile) remain in config.log. To avoid invalid invocation of preprocessor for build environment, we need to set proper CPPFLAGS_FOR_BUILD (may be empty) and pass it to subdirectories that need it. This is what this commit does. ChangeLog: * configure.ac: Pass CPPFLAGS_FOR_BUILD to subdirectories. * configure: Regenerate. 2022-09-21 Shihua RISC-V: Implement Ztso extension This patch support ZTSO extension. It will turn on the tso flag for elf_flags once we have enabled Ztso extension. This is intended to implement v0.1 of the proposed specification which can be found in Chapter 25 of, https://github.com/riscv/riscv-isa-manual/releases/download/draft-20220723-10eea63/riscv-spec.pdf. bfd\ChangeLog: * elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Set TSO flag. * elfxx-riscv.c: Add Ztso's arch. binutils\ChangeLog: * readelf.c (get_machine_flags): Set TSO flag. gas\ChangeLog: * config/tc-riscv.c (riscv_set_tso): Ditto. (riscv_set_arch): Ditto. * testsuite/gas/riscv/ztso.d: New test. include\ChangeLog: * elf/riscv.h (EF_RISCV_TSO): Ditto. 2022-09-21 Nelson Chu RISC-V: Always generate R_RISCV_CALL_PLT reloc for call in assembler. Since we have the same behaviors of CALL and CALL_PLT relocs in linker for now, https://github.com/bminor/binutils-gdb/commit/3b1450b38c644f99aa2e211747b428b9f8d15cca And the psabi already deprecate the CALL reloc, https://github.com/riscv-non-isa/riscv-elf-psabi-doc/commit/a0dced85018d7a0ec17023c9389cbd70b1dbc1b0 Therefore, we should always generate R_RISCV_CALL_PLT reloc for call, even if it has @plt postfix. I believe LLVM (https://reviews.llvm.org/D132530) already support this, so GNU as should do the same thing. gas/ * config/tc-riscv.c (riscv_ip): Always generate CALL_PLT reloc for call, even if it has @plt postfix. * testsuite/gas/riscv/no-relax-reloc.d: Updated CALL to CALL_PLT. * testsuite/gas/riscv/relax-reloc.d: Likewise. ld/ * testsuite/ld-riscv-elf/variant_cc-r.d: Updated CALL to CALL_PLT. 2022-09-21 GDB Administrator Automatic date update in version.in 2022-09-21 Alan Modra Re: PowerPC64 pcrel got relocs against local symbols The last patch wasn't all that shiny. There are rather a lot more relocations that can hit the assertion in md_apply_fix if the symbol is local or absolute. Fix them all. * config/tc-ppc.c (ppc_force_relocation): Add all relocs that expect a symbol in md_apply_fix. Remove tls pcrel relocs already covered in general tls match range. 2022-09-21 Alan Modra looping in alpha_vms_slurp_relocs The direct cause for the looping was failing to test for error return from _bfd_vms_get_object_record inside a while(1) loop. Fix that. Also record status of first alpha_vms_slurp_relocs call and return that for all subsequent calls. (The object format has one set of relocation records for all sections.) If the first call fails, all others should too. * vms-alpha.c (struct vms_private_data_struct): Make reloc_done a tri-state int. (alpha_vms_slurp_relocs): Set reloc_done to 1 on success, -1 on failure. Return that status on subsequent calls. Check _bfd_vms_get_object_record return status. (alpha_vms_get_reloc_upper_bound): Return status from alpha_vms_slurp_relocs. (alpha_vms_write_exec): Exclude sections with contents NULL due to previous errors from layout, and don't try to write them. 2022-09-20 Dmitry Selyutin ppc/svp64: test setvl ms operand 2022-09-20 Tom Tromey Make stdin_event_handler static I noticed that stdin_event_handler is only used in event-top.c, so this patch changes it to be 'static'. 2022-09-20 Tom Tromey Constify some target_so_ops instances This changes some target_so_ops instances to be const. This makes their use a little more obvious (they can't be mutated) and also allows for the removal of some initialization code. Move solib_ops into gdbarch This changs solib_ops to be an ordinary gdbarch value and updates all the uses. This removes a longstanding FIXME and makes the code somewhat cleaner as well. Remove current_target_so_ops current_target_so_ops is only set in a single place. It seems better to simply remove it. 2022-09-20 Andrew Burgess gdb/testsuite: add a debuginfod-support.exp helper library We currently have a single test for GDB's debuginfod support, this is gdb.debuginfod/fetch_src_and_symbols.exp, this script does all the setup, starts debuginfod, and then does the testing. This commit tries to split the existing script in two, there is a new library lib/debuginfod-support.exp, which contains a helper functions related to running debuginfod tests. All the code in the new library is basically copied from the existing test case (which is why I retained the copyright date range on the new library), with some minor adjustments to try and make the code a little more generic. One change I made, for example, is the library offers functions to shut down debuginfod, previously we just relied on expect shutting down debuginfod when dejagnu completed. The existing test script is updated to make use of the new library code, and this test is still passing for me. The only change in the test results is a single test where I changed the name to remove the port number from the test name - the port number can change from run to run, so could make it hard to compare test results. I have also done a little light house keeping on the original test script, updating and adding new comments, and making use of proc_with_prefix in a couple of places. 2022-09-20 liuzhensong LoongArch: Set macro SUB_SEGMENT_ALIGN to 0. 2022-09-20 Nick Clifton Stop strip from complaining about empty note sections when stripping a binary for a second time. * objcopy.c (copy_object): Do not issue a warning message when encountering empty .gnu.build.attribute sections. New Serbian translations for various binutils sub-directories. 2022-09-20 Zeke Lu Bug 29580 - typo in warning message: .note.gnu.build-id data size is too bug 2022-09-20 Xi Ruoyao LoongArch: Fix R_LARCH_IRELATIVE insertion after elf_link_sort_relocs loongarch_elf_finish_dynamic_symbol is called after elf_link_sort_relocs if -z combreloc. elf_link_sort_relocs redistributes the contents of .rela.* sections those would be merged into .rela.dyn, so the slot for R_LARCH_IRELATIVE may be out of relplt->contents now. To make things worse, the boundary check dyn < dyn + relplt->size / sizeof (*dyn) is obviously wrong ("x + 10 < x"? :), causing the issue undetected during the linking process and the resulted executable suddenly crashes at runtime. The issue was found during an attempt to add static-pie support to the toolchain. Fix it by iterating through the inputs of .rela.dyn to find the slot. 2022-09-20 Xi Ruoyao LoongArch: Don't write into GOT for local ifunc Local ifuncs are always resolved at runtime via R_LARCH_IRELATIVE, so there is no need to write anything into GOT. And when we write the GOT we actually trigger a heap-buffer-overflow: If a and b are different sections, we cannot access something in b with "a->contents + (offset from a)" because "a->contents" and "b->contents" are heap buffers allocated separately, not slices of a large buffer. So stop writing into GOT for local ifunc now. 2022-09-20 GDB Administrator Automatic date update in version.in 2022-09-19 Vladimir Mezentsev gprofng: build documentation only if BUILD_MAN is true gprofng/ChangeLog 2022-09-16 Vladimir Mezentsev PR gprofng/29476 * gprofng/Makefile.am: Build documentation only if BUILD_MAN is true * gprofng/Makefile.in: Rebuild. * gprofng/configure: Rebuild. 2022-09-19 Enze Li gdb: add ATTRIBUTE_PRINTF to gdb_bfd_error_handler I see this error when building with clang, CXX gdb_bfd.o gdb_bfd.c:1180:43: error: format string is not a string literal [-Werror,-Wformat-nonliteral] const std::string str = string_vprintf (fmt, ap_copy); ^~~ 1 error generated. This patch adds missing ATTRIBUTE_PRINTF to fix the error. Tested on x86_64-linux with gcc 12 and clang 14. 2022-09-19 GDB Administrator Automatic date update in version.in 2022-09-18 GDB Administrator Automatic date update in version.in 2022-09-17 Tom de Vries [gdb/symtab] Fix "file index out of range" complaint With the test-case included in this commit, we run into this FAIL: ... (gdb) p var^M During symbol reading: file index out of range^M $1 = 0^M (gdb) FAIL: gdb.dwarf2/dw2-no-code-cu.exp: p var with no complaints ... This is a regression since commit 6d263fe46e0 ("Avoid bad breakpoints with --gc-sections"), which contains this change in read_file_scope: ... - handle_DW_AT_stmt_list (die, cu, fnd, lowpc); + if (lowpc != highpc) + handle_DW_AT_stmt_list (die, cu, fnd, lowpc); ... The change intends to avoid a problem with a check in lnp_state_machine::check_line_address, but also prevents the file and dir tables from being read, which causes the complaint. Fix the FAIL by reducing the scope of the "lowpc != highpc" condition to the call to dwarf_decode_lines in handle_DW_AT_stmt_list. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29561 2022-09-17 GDB Administrator Automatic date update in version.in 2022-09-17 Kevin Buettner BFD error message suppression test case This commit adds a GDB test case which tests GDB's BFD error handler hook for suppressing output of all but the first identical messages. See the comment at the beginning of bfd-errors.exp for details about this new test. I've tested this test for both 32- and 64-bit ELF files and also on both little endian and big endian machines. It also works for both native and remote targets. The only major restriction is that it only works for ELF targets. 2022-09-17 Kevin Buettner Suppress printing of superfluous BFD error messages This commit adds a hook to the BFD error handler for suppressing identical messages which have been output once already. It's motivated by this Fedora bug... https://bugzilla.redhat.com/show_bug.cgi?id=2083315 ...in which over 900,000 BFD error messages are output when attaching to firefox. From the bug report, the messages all say: BFD: /usr/lib/debug/usr/lib64/firefox/libxul.so-100.0-2.fc35.x86_64.debug: attempt to load strings from a non-string section (number 38) Since there's no (additional) context which might assist the user in determining what's wrong, there's really no point in outputting more than one message. Of course, if BFD should output some other/different message, it should be output too, but all future messages identical to those already output should be suppressed. For the firefox problem, it turned out that there were only 37 sections, but something was referring to section #38. I haven't investigated further to find out how this came to be. Despite this problem, useful debugging might still be done, especially if the user doesn't care about debugging the problematic library. If it turns out that knowing the quantity of messages might be useful, I've implemented the suppression mechanism by keeping a count of each identical message. A new GDB command, perhaps a 'maintenance' command, could be added to print out each message along with the count. I haven't implemented this though because I'm not convinced of its utility. Also, the BFD message printer has support for BFD- specific format specifiers. The BFD message strings that GDB stores in its map are sufficient for distinguishing messages from each other, but are not identical to those output by BFD's default error handler. So, that problem would need to be solved too. 2022-09-16 Tom de Vries [gdb/symtab] Handle named DW_TAG_unspecified_type DIE With the test-case included in the patch, we run into: ... (gdb) info types -q std::nullptr_t^M During symbol reading: unsupported tag: 'DW_TAG_unspecified_type'^M ^M File /usr/include/c++/7/x86_64-suse-linux/bits/c++config.h:^M 2198: typedef decltype(nullptr) std::nullptr_t;^M (gdb) FAIL: gdb.dwarf2/nullptr_t.exp: info types -q std::nullptr_t \ without complaint ... Fix the complaint by handling DW_TAG_unspecified_type in new_symbol, and verify in the test-case using "maint print symbols" that the symbol exists. Tested on x86_64-linux, with gcc 7.5.0 and clang 13.0. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17271 2022-09-16 Tom de Vries [gdb/tdep] Fix PowerPC IEEE 128-bit format arg passing On a powerpc system with gcc 12 built to default to 128-bit IEEE long double, I run into: ... (gdb) print find_max_long_double_real(4, ldc1, ldc2, ldc3, ldc4)^M $8 = 0 + 0i^M (gdb) FAIL: gdb.base/varargs.exp: print \ find_max_long_double_real(4, ldc1, ldc2, ldc3, ldc4) ... This is due to incorrect handling of the argument in ppc64_sysv_abi_push_param. Fix this and similar cases, and expand the test-case to test handling of homogeneous aggregates. Tested on ppc64le-linux, power 10. Co-Authored-By: Ulrich Weigand Tested-by: Carl Love Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29543 2022-09-16 Tom de Vries [gdb/testsuite] Fix gdb.dwarf2/dw2-dir-file-name.exp for aarch64 [ Another attempt at fixing the problem described in commit cd919f5533c ("[gdb/testsuite] Fix gdb.dwarf2/dw2-dir-file-name.exp"). ] When running the test-case gdb.dwarf2/dw2-dir-file-name.exp with aarch64-linux, we run into: ... (gdb) continue^M Continuing.^M ^M Breakpoint 2, compdir_missing__ldir_missing__file_basename () at \ tmp-dw2-dir-file-name.c:999^M (gdb) FAIL: gdb.dwarf2/dw2-dir-file-name.exp: \ compdir_missing__ldir_missing__file_basename: continue to breakpoint: \ compdir_missing__ldir_missing__file_basename ... The breakpoint set at compdir_missing__ldir_missing__file_basename_label, address 0x400608 starts at a line entry: ... CU: tmp-dw2-dir-file-name.c: File name Line number Starting address View Stmt tmp-dw2-dir-file-name.c 999 0x400608 x tmp-dw2-dir-file-name.c 1000 0x40062c x tmp-dw2-dir-file-name.c - 0x40062c ... and therefore the breakpoint is printed without instruction address. In contrast, for x86_64-linux, we have the breakpoint printed with instruction address: ... (gdb) continue^M Continuing.^M ^M Breakpoint 2, 0x004004c1 in compdir_missing__ldir_missing__file_basename () \ at tmp-dw2-dir-file-name.c:999^M (gdb) PASS: gdb.dwarf2/dw2-dir-file-name.exp: \ compdir_missing__ldir_missing__file_basename: continue to breakpoint: \ compdir_missing__ldir_missing__file_basename ... The breakpoint set at compdir_missing__ldir_missing__file_basename_label, address 0x004004c1 doesn't start at a line entry: ... CU: tmp-dw2-dir-file-name.c: File name Line number Starting address View Stmt tmp-dw2-dir-file-name.c 999 0x4004bd x tmp-dw2-dir-file-name.c 1000 0x4004d3 x tmp-dw2-dir-file-name.c - 0x4004d3 ... Fix this by: - unifying behaviour between the archs by adding an explicit line number entry for the address compdir_missing__ldir_missing__file_basename_label, making the FAIL reproducible on x86_64-linux. - expecting the breakpoint to be printed without instruction address. Tested on x86_64-linux and aarch64-linux. 2022-09-16 Tom de Vries [gdb] Handle pending ^C after rl_callback_read_char In completion tests in various test-cases, we've been running into these "clearing input line" timeouts: ... (gdb) $cmd^GPASS: gdb.gdb/unittest.exp: tab complete "$cmd" FAIL: gdb.gdb/unittest.exp: tab complete "$cmd" (clearing input line) (timeout) ... where $cmd == "maintenance selftest name_that_does_not_exist". AFAIU, the following scenario happens: - expect sends "$cmd\t" - gdb detects the stdin event, and calls rl_callback_read_char until it comes to handle \t - readline interprets the \t as completion, tries to complete, fails to do so, outputs a bell (^G) - expect sees the bell, and proceeds to send ^C - readline is still in the call to rl_callback_read_char, and stores the signal in _rl_caught_signal - readline returns from the call to rl_callback_read_char, without having handled _rl_caught_signal - gdb goes to wait for the next event - expect times out waiting for "Quit", the expected reaction for ^C Fix this by handling pending signals after each call to rl_callback_read_char. The fix is only available for readline 8.x, if --with-system-readline provides an older version, then the fix is disabled due to missing function rl_check_signals. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27813 2022-09-16 Alan Modra PowerPC64 pcrel got relocs against local symbols Not that anyone would want to indirect via the GOT when an address can be loaded directly with pla, the following: pld 3,x@got@pcrel x: leads to "Internal error in md_apply_fix", because the generic parts of assembler fixup handling convert the fx_pcrel fixup to one without a symbol. Stop that happening. * config/tc-ppc.c (ppc_force_relocation): Add PLT_PCREL34 and assorted GOT_PCREL34 relocs. 2022-09-16 Alan Modra pdb sanity check block_size * pdb.c (pdb_get_elt_at_index): Only allow block_size to be 512, 1024, 2048, or 4096. 2022-09-16 Nelson Chu RISC-V: Make g imply zmmul extension. bfd/ * elfxx-riscv.c (riscv_implicit_subset): Moved entry of m after g, so that g can imply zmmul. gas/ * testsuite/gas/riscv/attribute-01.d: Updated. * testsuite/gas/riscv/attribute-02.d: Likewise. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-04.d: Likewise. * testsuite/gas/riscv/attribute-05.d: Likewise. * testsuite/gas/riscv/attribute-10.d: Likewise. * testsuite/gas/riscv/march-imply-g.d: Likewise. * testsuite/gas/riscv/march-imply-unsupported.d: Likewise. 2022-09-16 GDB Administrator Automatic date update in version.in 2022-09-15 Tsukasa OI bfd, binutils, gas: Remove/mark unused variables Clang generates a warning on unused (technically, written but not read thereafter) variables. By the default configuration (with "-Werror"), it causes a build failure (unless "--disable-werror" is specified). This commit adds ATTRIBUTE_UNUSED attribute to some of them, which means they are *possibly* unused (can be used but no warnings occur when unused) and removes others. bfd/ChangeLog: * elf32-lm32.c (lm32_elf_size_dynamic_sections): Mark unused rgot_count variable. * elf32-nds32.c (elf32_nds32_unify_relax_group): Remove unused count variable. * mmo.c (mmo_scan): Mark unused lineno variable. binutils/ChangeLog: * windmc.c (write_rc): Remove unused i variable. gas/ChangeLog: * config/tc-riscv.c (riscv_ip): Remove unused argnum variable. ld/ChangeLog: * pe-dll.c (generate_reloc): Remove unused bi and page_count variables. 2022-09-15 Vladimir Mezentsev gprofng: fix build issues on musl gprofng/ChangeLog 2022-09-14 Vladimir Mezentsev PR gprofng/29477 * configure.ac: Set __MUSL_LIBC. * configure: Rebuild. * common/config.h.in: Rebuild. * src/collector_module.h: Fix compiler errors because mmap64, open64, pwrite64 are macros and getcontext() is absent on musl. * libcollector/collector.c: Likewise. * libcollector/hwprofile.c: Likewise. * libcollector/iolib.c: Likewise. * libcollector/libcol_util.c: Likewise. * libcollector/linetrace.c: Likewise. * libcollector/memmgr.c: Likewise. * libcollector/profile.c: Likewise. * libcollector/unwind.c: Likewise. * libcollector/dispatcher.c: Likewise. * src/Experiment.cc: Likewise. * libcollector/collector.h: Use dlsym() because dlvsym() is not defined on musl. * libcollector/iotrace.c: Remove interposition of versioned functions. * libcollector/mmaptrace.c: Likewise. * libcollector/libcol_util.h: Fix -Wint-to-pointer-cast warnings. * libcollector/jprofile.c: Likewise. * libcollector/synctrace.c: Include "collector.h". * src/Print.cc: Use get_basename() because basename() is not defined on musl. * common/hwcdrv.c: Fix -Wformat= warnings. 2022-09-15 GDB Administrator Automatic date update in version.in 2022-09-14 Rupesh Potharla Binutils: Readelf testcase failing with clang * testsuite/binutils-all/readelf.exp (readelf_wi_test): Extend regexps to allow for output genreated by the Clang compiler. 2022-09-14 Alan Modra looping in bfd_mach_o_fat_openr_next_archived_file mach-o.c doesn't sanity check mach-o-fat archives, making it easy for fuzzers to create an archive with mach_o_fat_archentry headers that point to the same offset. bfd_mach_o_fat_openr_next_archived_file uses the previous element offset to find its header, and thus the next element. If two offsets are the same, any tool reading the archive will get stuck. This patch rejects such archives, and any with overlapping elements. * mach-o.c (overlap_previous): New function. (bfd_mach_o_fat_archive_p): Sanity check that elements do not overlap each other or the file and archive headers. 2022-09-14 Alan Modra regen pofiles 2022-09-14 Tsukasa OI bfd: Stop using -Wstack-usage=262144 when built with Clang Some components of GNU Binutils will pass "-Wstack-usage=262144" when "GCC >= 5.0" is detected. However, Clang does not support "-Wstack-usage", despite that related configuration part in bfd/warning.m4 handles the latest Clang (15.0.0 as of this writing) as "GCC >= 5.0". The option "-Wstack-usage" was ignored when the first version of Clang is released but even this "ignoring" behavior is removed before Clang 4.0.0. So, if we give Clang "-Wstack-usage=262144", it generates a warning, making the build failure. This commit checks "__clang__" macro to prevent adding the option if the compiler is identified as Clang. bfd/ChangeLog: * warning.m4: Stop appending "-Wstack-usage=262144" option when compiled with Clang. * configure: Regenerate. binutils/ChangeLog: * configure: Regenerate. gas/ChangeLog: * configure: Regenerate. gold/ChangeLog: * configure: Regenerate. gprof/ChangeLog: * configure: Regenerate. ld/ChangeLog: * configure: Regenerate. opcodes/ChangeLog: * configure: Regenerate. 2022-09-14 Alan Modra Modify ld-ctf test files to suit ARM The "@" char starts a comment on ARM. * testsuite/ld-ctf/diag-ctf-version-0.s: Replace @progbits with %progbits. * testsuite/ld-ctf/diag-ctf-version-2-unsupported-feature.s: Likewise. * testsuite/ld-ctf/diag-ctf-version-f.s: Likewise. * testsuite/ld-ctf/diag-cttname-invalid.s: Likewise. * testsuite/ld-ctf/diag-cttname-null.s: Likewise. * testsuite/ld-ctf/diag-cuname.s: Likewise. * testsuite/ld-ctf/diag-decompression-failure.s: Likewise. * testsuite/ld-ctf/diag-parlabel.s: Likewise. * testsuite/ld-ctf/diag-parname.s: Likewise. * testsuite/ld-ctf/diag-strlen-invalid.s: Likewise. * testsuite/ld-ctf/diag-unsupported-flag.s: Likewise. * testsuite/ld-ctf/diag-wrong-magic-number.s: Likewise. 2022-09-14 Alan Modra asan: som_set_reloc_info heap buffer overflow Also a bugfix. The first time the section was read, the contents didn't supply an addend. * som.c (som_set_reloc_info): Sanity check offset. Do process contents after reading. Tidy section->contents after freeing. 2022-09-14 Alan Modra ubsan: som_is_space null dereference On objcopy of fuzzed file. * som.c (som_write_fixups): Exit loop if space sections all processed. 2022-09-14 Alan Modra msan: vms-alpha use-of-uninitialized-value in dst_retrieve_location * vms-alpha.c (dst_define_location): Init any unused entries. 2022-09-14 Alan Modra ubsan: arm-dis.c index out of bounds We are way off in the weeds with this one, and will be printing for S > 10. * arm-dis.c (print_insn_cde): Wrap 'T' value. 2022-09-14 Alan Modra PR29540, R_PPC64_NONE in .rela.dyn when linking Linux vdso PR 29540 * elf64-ppc.c (allocate_dynrelocs): Don't alloc space for relocs against discarded sections. (ppc64_elf_size_dynamic_sections): Use standard test for discarded sections. * elf32-ppc.c (allocate_dynrelocs): Don't alloc space for relocs against discarded sections. (ppc_elf_size_dynamic_sections): Use standard test for discarded sections. 2022-09-14 GDB Administrator Automatic date update in version.in 2022-09-13 Aaron Merey objdump: '-S' should trigger search for separate debuginfo. Add with_source_code to the command line options that trigger might_need_separate_debug_info and dump_any_debugging. This helps 'objdump -S' download missing files via debuginfod without the need for specifying extra command line options like '-L'. 2022-09-13 Bruno Larsen gdb/testsuite: Update gdb.base/so-impl-ld.exp gdb.base/so-impl-ld.exp was setup assuming that the compiler would add epilogue information and that GDB would stop in the } line. This would make clang tests fail like so: step^M solib_main (arg=10000) at ../../../common/git-repos/binutils-gdb/gdb/testsuite/gdb.base/solib1.c:7^M 7|__ return arg*arg;|__|___/* HERE */^M (gdb) PASS: gdb.base/so-impl-ld.exp: step into solib call next^M main () at ../../../common/git-repos/binutils-gdb/gdb/testsuite/gdb.base/so-impl-ld.c:22^M 22|_ return 0;^M (gdb) FAIL: gdb.base/so-impl-ld.exp: step in solib call next^M 0x00007ffff7cef560 in __libc_start_call_main () from /lib64/libc.so.6^M (gdb) FAIL: gdb.base/so-impl-ld.exp: step out of solib call This patch changes it so solib_main has 2 lines where GDB can stop regardless of compiler choices, and updates the exp file to generically deal with unknown number of steps until leaving that function. 2022-09-13 Bruno Larsen gdb/testsuite: introduce gdb_step_until Currently, GDB's testsuite uses a set amount of step commands to exit functions. This is a problem if a compiler emits different epilogue information from gcc, or emits no epilogue information at all. It was most noticeable if Clang was used to test GDB. To fix this unreliability, this commit introduces a new proc that will step the inferior until it is stopped at a line that matches the given regexp, or until it steps too many times - defined as an optional argument. If the line is found, it shows up as a single PASS in the test, and if the line is not found, a single FAIL is emitted. This patch only introduces this proc, but does not add it to any existing tests, these will be introduced in the following commit. 2022-09-13 Bruno Larsen explicitly test for stderr in gdb.base/dprintf.exp Not all compilers add stderr debug information when compiling a program. Clang, for instance, prefers to add nothing from standard libraries and let an external debug package have this information. Because of this, gdb.base/dprintf.exp was failing when GDB attempted to use dprintf as a call to fprintf(stderrr, ...), like this: (gdb) PASS: gdb.base/dprintf.exp: call: fprintf: set dprintf style to call continue Continuing. kickoff 1234 also to stderr 1234 'stderr' has unknown type; cast it to its declared type (gdb) FAIL: gdb.base/dprintf.exp: call: fprintf: 1st dprintf (timeout) To avoid this false positive, we explicitly test to see if the compiler has added information about stderr at all, and abort testing dprintf as an fprintf call if it is unavailable. 2022-09-13 Mark Harmstone Add pdb archive format Resubmitted with changes in https://sourceware.org/pipermail/binutils/2022-September/122791.html made. 2022-09-13 Jiangshuai Li gdb/csky rm csky_print_registers_info The reason for implementing this interface is that we want to print GPR, PC, EPC, PSR and EPSR when the "info register" command is executed. A prev patch has added PC, EPC, PSR and EPSR to reggroup general_group, the purpose has been achieved, so this function is no longer required. 2022-09-13 Jiangshuai Li gdb/csky rm csky_memory_insert/remove_breakpoint Software breakpoints are inserted or removed by the gdb stub via remote protocol, these two functions are no longer needed. 2022-09-13 Jiangshuai Li gdb/csky add unwinder for long branch cases There are two sequences of instructions for long branch: 1. jmpi [pc+4] //insn code: 0xeac00001 .long addr 2. lrw t1, [pc+8] //insn code: 0xea8d0002 jmp t1 //insn code: 0x7834 nop //insn code: 0x6c03 .long addr 2022-09-13 Jiangshuai Li gdbserver/csky add csky gdbserver support Add new files: gdb/arch/csky.c gdb/arch/csky.h gdb/features/cskyv2-linux.c gdbserver/linux-csky-low.cc 1. In gdb/arch/csky.c file, add function "csky_create_target_description()" for csky_target::low_arch_setup(). later, it can be used for csky native gdb. 2. In gdb/features/cskyv2-linux.c file, create target_tdesc for csky, include gprs, pc, hi, lo, float, vector and float control registers. 3. In gdbserver/linux-csky-low.cc file, using PTRACE_GET/SET_RGESET to get/set registers. The main data structures in asm/ptrace.h are: struct pt_regs { unsigned long tls; unsigned long lr; unsigned long pc; unsigned long sr; unsigned long usp; /* * a0, a1, a2, a3: * r0, r1, r2, r3 */ unsigned long orig_a0; unsigned long a0; unsigned long a1; unsigned long a2; unsigned long a3; /* * r4 ~ r13 */ unsigned long regs[10]; /* r16 ~ r30 */ unsigned long exregs[15]; unsigned long rhi; unsigned long rlo; unsigned long dcsr; }; struct user_fp { unsigned long vr[96]; unsigned long fcr; unsigned long fesr; unsigned long fid; unsigned long reserved; }; 2022-09-13 GDB Administrator Automatic date update in version.in 2022-09-12 Tom Tromey Use checked_static_cast in more places I went through all the uses of dynamic_cast<> in gdb, looking for ones that could be replaced with checked_static_cast. This patch is the result. Regression tested on x86-64 Fedora 34. 2022-09-12 Peter Bergner ppc: Document the -mfuture and -Mfuture options and make them usable The -mfuture and -Mfuture options which are used for adding potential new ISA instructions were not documented. They also lacked a bitmask so new instructions could not be enabled by those options. Fixed. binutils/ * doc/binutils.texi: Document -Mfuture. gas/ * config/tc-ppc.c: Document -mfuture * doc/c-ppc.texi: Likewise. include/ * opcode/ppc.h (PPC_OPCODE_FUTURE): Define. opcodes/ * ppc-dis.c (ppc_opts) : Use it. * ppc-opc.c (FUTURE): Define. 2022-09-12 Bruno Larsen add xfails to gdb.base/complex-parts.exp when testing with clang clang doesn't add encoding to the name of complex variables, only says that the type name is complex, making the relevant tests fail. This patch adds the xfails to the tests that expect the variable name to include it. 2022-09-12 Bruno Larsen Fix gdb.base/call-ar-st to work with Clang When running gdb.base/call-ar-st.exp against Clang, we see one FAIL, like so: print_all_arrays (array_i=, array_c= "ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa ZaZaZaZaZaZaZaZaZaZaZaZa", array_f=, array_d=) at ../../../src/gdb/testsuite/gdb.base/call-ar-st.c:274 274 print_int_array(array_i); /* -step1- */ (gdb) FAIL: gdb.base/call-ar-st.exp: step inside print_all_arrays With GCC we instead see: print_all_arrays (array_i=, array_c= "ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa", array_f=, array_d=) at /home/pedro/gdb/build/gdb/testsuite/../../../src/gdb/testsuite/gdb.base/call-ar-st.c:274 274 print_int_array(array_i); /* -step1- */ (gdb) PASS: gdb.base/call-ar-st.exp: step inside print_all_arrays The difference is that with Clang we get: array_i=, ... instead of array_i = , ... These symbols are local static variables, and "main" is the name of the function they are defined in. GCC instead appends a sequence number to the linkage name: $ nm -A call-ar-st.gcc | grep integer_ call-ar-st/call-ar-st:00000000000061a0 b integer_array.3968 $ nm -A call-ar-st.clang | grep integer_ call-ar-st:00000000004061a0 b main.integer_array This commit changes the testcase to accept both outputs, as they are functionally identical. Co-Authored-By: Pedro Alves Change-Id: Iaf2ccdb9d5996e0268ed12f595a6e04b368bfcb4 2022-09-12 Bruno Larsen fix gdb.base/access-mem-running.exp for clang testing Clang was optimizing global_var away because it was not being used anywhere. this commit fixes that by adding the attribute used it. update gdb.base/info-program.exp to not fail with clang The test specifically mentions that it doesn't care where the program stops, however it was still testing for a specific location. The clang compiler emits different line information for epilogue, so GDB reports a different stopping location, depending on the used compiler. With this patch the test works even with clang. 2022-09-12 Bruno Larsen gdb/testsuite: change gdb.base/nodebug.exp to not fail with clang Clang organizes the variables differently to gcc in the original version of this code, leading to the following differences when testing p (int*) &dataglobal + 1 gcc: $16 = (int *) 0x404034 clang: $16 = (int *) 0x404034 However, since the important part of this test doesn't seem to be which symbol is linked, but rather if GDB is correctly increasing the address. This test was changed to actually measure address changes, instead of assuming the ordering and naming of symbols. Co-Authored-By: Andrew Burgess 2022-09-12 Martin Storsjö ld: pe: Apply review suggestions on the existing exports/imports arrays Use a separate explicit max_exports/imports field, instead of deducing it from the number of allocated elements. Use a named constant for the incremental growth of the array. Use bool instead of int for boolean values. Remove an unnecessary if statement/scope in the def_file_free function. Add more verbose comments about parameters, and about insertion into an array of structs. Generally use unsigned integers for all array indices and sizes. The num_exports/imports fields are kept as is as signed integers, since changing them to unsigned would require a disproportionate amount of changes ti pe-dll.c to avoid comparisons between signed and unsigned. Simply use xrealloc instead of a check and xmalloc/xrealloc; xrealloc can take NULL as the first parameter (and does a similar check internally). (This wasn't requested in review though, but noticed while working on the code.) 2022-09-12 Martin Storsjö ld: pe: Improve performance of object file exclude symbol directives Store the list of excluded symbols in a sorted list, speeding up checking for duplicates when inserting new entries. This is done in the same way as is done for exports and imports (while the previous implementation was done with a linked list, based on the implementation for aligncomm). When linking object files with excluded symbols, there can potentially be very large numbers of excluded symbols (just like builds with exports can have a large number of exported symbols). This improves the link performance somewhat, when linking with large numbers of excluded symbols. The later actual use of the excluded symbols within pe-dll.c handles them via an unordered linked list still, though. 2022-09-12 Tom de Vries [gdb] Fix abort in selftest run_on_main_thread with ^C When running selftest run_on_main_thread and pressing ^C, we can run into: ... Running selftest run_on_main_thread. terminate called without an active exception Fatal signal: Aborted ... The selftest function looks like this: ... static void run_tests () { std::thread thread; done = false; { gdb::block_signals blocker; thread = std::thread (set_done); } while (!done && gdb_do_one_event () >= 0) ; /* Actually the test will just hang, but we want to test something. */ SELF_CHECK (done); thread.join (); } ... The error message we see is due to the destructor of thread being called while thread is joinable. This is supposed to be taken care of by thread.join (), but the ^C prevents that one from being called, while the destructor is still called. Fix this by ensuring thread.join () is called (if indeed required) before the destructor using SCOPE_EXIT. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29549 2022-09-12 Tom de Vries [gdb/symtab] Support .gdb_index section with TUs in .debug_info The .gdb_index variant of commit d878bb39e41 ("[gdb/symtab] Support .debug_names section with TUs in .debug_info"). Tested on x86_64-linux. 2022-09-12 Tom de Vries [gdb/testsuite] Fix gdb.dwarf2/dw2-dir-file-name.exp for ppc64le In commit cd919f5533c ("[gdb/testsuite] Fix gdb.dwarf2/dw2-dir-file-name.exp"), I made gdb.dwarf2/dw2-dir-file-name.exp independent of prologue analyzers, using this change: ... - gdb_breakpoint $func + gdb_breakpoint *$func ... That however caused a regression on ppc64le. For PowerPC, as described in the ELFv2 ABI, a function can have a global and local entry point. Setting a breakpoint on *$func effectively creates a breakpoint for the global entry point, so if the function is entered through the local entry point, the breakpoint doesn't trigger. Fix this by reverting commit cd919f5533c, and setting the breakpoint on ${func}_label instead. Tested on x86_64-linux and ppc64le-linux. 2022-09-12 Tom de Vries [gdb/testsuite] Fix gdb.dwarf2/dw2-dir-file-name.exp with clang When running test-case gdb.dwarf2/dw2-dir-file-name.exp with clang, we run into: ... (gdb) break *compdir_missing__ldir_missing__file_basename^M Breakpoint 2 at 0x400580^M (gdb) continue^M Continuing.^M ^M Breakpoint 2, 0x0000000000400580 in \ compdir_missing.ldir_missing.file_basename ()^M (gdb) FAIL: gdb.dwarf2/dw2-dir-file-name.exp: \ compdir_missing__ldir_missing__file_basename: continue to breakpoint: \ compdir_missing__ldir_missing__file_basename ... The problem is that the test-case uses labels outside functions, which is know to cause problem with clang, as documented in the comment for proc function_range. Fix this by using get_func_info instead. Tested on x86_64-linux, with both gcc 7.5.0 and clang 13.0.0. 2022-09-12 Jan Beulich x86: avoid i386_dis_printf()'s staging area for a fair part of output While PR binutils/29483 has now been addressed differently, this originally proposed change still has its merits: Avoiding vsnprintf() for typically far more than half of the overall output results in a 2-3% performance gain in my testing (with debug builds of objdump, libbfd, and libopcodes). With that part of output no longer using staging_area[], the array also doesn't need to be quite as large anymore (the largest presently used size is 27, from "64-bit address is disabled"). While limiting the scope of "res" it became apparent that - no caller cares about the function's return value, - the comment about the return value was wrong, - a particular positive return value would have been meaningless to the caller. Therefore convert the function to return "void" at the same time. 2022-09-12 Nelson Chu RISC-V: PR28509, the default visibility symbol cannot be referenced by R_RISCV_JAL. When generating the shared object, the default visibility symbols may bind externally, which means they will be exported to the dynamic symbol table, and are preemptible by default. These symbols cannot be referenced by the non-pic R_RISCV_JAL and R_RISCV_RVC_JUMP. However, consider that linker may relax the R_RISCV_CALL relocations to R_RISCV_JAL or R_RISCV_RVC_JUMP, if these relocations are relocated to the plt entries, then we won't report error for them. Perhaps we also need the similar checks for the R_RISCV_BRANCH and R_RISCV_RVC_BRANCH relocations. After applying this patch, and revert the following glibc patch, riscv: Fix incorrect jal with HIDDEN_JUMPTARGET https://sourceware.org/git/?p=glibc.git;a=commit;h=68389203832ab39dd0dbaabbc4059e7fff51c29b I get the expected errors as follows, ld: relocation R_RISCV_RVC_JUMP against `__sigsetjmp' which may bind externally can not be used when making a shared object; recompile with -fPIC ld: relocation R_RISCV_JAL against `exit' which may bind externally can not be used when making a shared object; recompile with -fPIC Besides, we also have similar changes for libgcc, RISC-V: jal cannot refer to a default visibility symbol for shared object https://github.com/gcc-mirror/gcc/commit/45116f342057b7facecd3d05c2091ce3a77eda59 bfd/ pr 28509 * elfnn-riscv.c (riscv_elf_relocate_section): Report errors when makeing a shard object, and the referenced symbols of R_RISCV_JAL relocations are default visibility. Besides, we should handle most of the cases here, so don't need the unresolvable check later for R_RISCV_JAL and R_RISCV_RVC_JUMP. ld/ pr 28509 * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated. * testsuite/ld-riscv-elf/lib-nopic-01a.s: Removed. * testsuite/ld-riscv-elf/lib-nopic-01b.d: Likewise. * testsuite/ld-riscv-elf/lib-nopic-01b.s: Likewise. * testsuite/ld-riscv-elf/shared-lib-nopic-01.d: New testcase. * testsuite/ld-riscv-elf/shared-lib-nopic-01.s: Likewise. * testsuite/ld-riscv-elf/shared-lib-nopic-02.d: Likewise. * testsuite/ld-riscv-elf/shared-lib-nopic-02.s: Likewise. * testsuite/ld-riscv-elf/shared-lib-nopic-03.d: Likewise. * testsuite/ld-riscv-elf/shared-lib-nopic-03.s: Likewise. * testsuite/ld-riscv-elf/shared-lib-nopic-04.d: Likewise. * testsuite/ld-riscv-elf/shared-lib-nopic-04.s: Likewise. 2022-09-12 GDB Administrator Automatic date update in version.in 2022-09-11 Tom de Vries [gdb/symtab] Fix handling of DW_TAG_unspecified_type Currently, the test-case contained in this patch fails: ... (gdb) p (int) foo ()^M Invalid cast.^M (gdb) FAIL: gdb.dwarf2/dw2-unspecified-type.exp: p (int) foo () ... because DW_TAG_unspecified_type is translated as void. There's some code in read_unspecified_type that marks the type as stub, but that's only active for ada: ... if (cu->lang () == language_ada) type->set_is_stub (true); ... Fix this by: - marking the type as a stub for all languages, and - handling the stub return type case in call_function_by_hand_dummy. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29558 2022-09-11 GDB Administrator Automatic date update in version.in 2022-09-10 Alan Modra Re: PR29466, APP/NO_APP with linefile It looks like I copied the SIZE init across from binutils/testsuite/config/default.exp without some necessary editing. * testsuite/config/default.exp (SIZE): Adjust relative path. 2022-09-10 GDB Administrator Automatic date update in version.in 2022-09-09 Nick Clifton Support debuginfo files with empty group sections. PR 29532 bfd * elf.c (setup_group): Do not return false if there is no group information available. bionutils* objcopy.c (setup_section): Leave group sections intact when creating separate debuginfo files. 2022-09-09 Tsukasa OI RISC-V: Fix vector CSR requirements Vector CSRs are also required on smaller vector subsets. Not only that the most of vector CSRs are general purpose (and must be accessible for every vector subsets), current minimum vector subset 'Zve32x' requires fixed point arithmetic, making remaining non-general purpose (fixed point arithmetic only) CSRs mandatory for such subsets. So, those CSRs must be accessible from 'Zve32x', not just from 'V'. This commit fixes this issue which caused CSR accessibility warnings. gas/ChangeLog: * config/tc-riscv.c (riscv_csr_address): Change vector CSR requirement from 'V' to 'Zve32x'. * testsuite/gas/riscv/csr-version-1p9p1.l: Change vector CSR requirement from 'V' to 'Zve32x'. * testsuite/gas/riscv/csr-version-1p10.l: Likewise. * testsuite/gas/riscv/csr-version-1p11.l: Likewise. * testsuite/gas/riscv/csr-version-1p12.l: Likewise. 2022-09-09 GDB Administrator Automatic date update in version.in 2022-09-08 Carl Love Fix hardware watchpoint check in test gdb.base/watchpoint-reuse-slot.exp This test generates 48 failures on Power 9 when testing with HW watchpoints enabled. Note HW watchpoint support is disabled on Power 9 due to a HW bug. The skip_hw_watchpoint_tests proc must be used to correctly determine if the processor supports HW watchpoints. This patch replaces the [target_info exists gdb,no_hardware_watchpoints] with the skip_hw_watchpoint_tests check. This patch was tested on Power 9, Power 10 and X86-64 with no regressions. 2022-09-08 Nick Clifton Gas generated incorrect debug info (top-level DW_TAG_unspecified_type DIE) PR 29559 * dwarf2dbg.c (out_debug_info): Place DW_TAG_unspecified_type at the end of the list of children, not at the start of the CU information. * testsuite/gas/elf/dwarf-3-func.d: Update expected output. * testsuite/gas/elf/dwarf-5-func-global.d: Likewise. * testsuite/gas/elf/dwarf-5-func-local.d: Likewise. * testsuite/gas/elf/dwarf-5-func.d: Likewise. 2022-09-08 Tsukasa OI gdbsupport: Fix config.status dependency Commit 171fba11ab27 ("Make GDBserver abort on internal error in development mode") created a new substitution CONFIG_STATUS_DEPENDENCIES but this is used by Makefile.in (which is not regenerated by that commit). After regenerating it, it is found that CONFIG_STATUS_DEPENDENCIES value is not valid, making gdbsupport fail to build. Since the CONFIG_STATUS_DEPENDENCIES value is used in the Makefile, macro substitution must have a Makefile format but commit 171fba11ab27 used shell format "$srcdir/../bfd/development.sh". This commit fixes this issue by substituting "$srcdir" (shell format) to "$(srcdir)" (Makefile format). It preserves the dependency as Pedro intended and fixes the build problem. It also regenerates corresponding files with the maintainer mode. gdbsupport/ChangeLog: * configure.ac: Fix config.status dependency. * Makefile.in: Regenerate. * configure: Regenerate. 2022-09-08 Nick Clifton Maintainer mode: wrong gettext version? * README-maintainer-mode: Update minimum version of gettext required. i686-w64-mingw32-objdump -WL returns incorrect file paths PR 29523 * dwarf.c (display_debug_lines_decoded): Correctly handle DWARF-5 directory and filename tables. 2022-09-08 GDB Administrator Automatic date update in version.in 2022-09-07 Tom de Vries [gdb/testsuite] xfail gdb.ada/O2_float_param.exp for aarch64 and gcc 7.5.0 On aarch64-linux, with gcc 7.5.0, we run into: ... (gdb) frame^M #0 callee.increment (val=99.0, val@entry=9.18340949e-41, msg=...) at \ callee.adb:21^M 21 if Val > 200.0 then^M (gdb) FAIL: gdb.ada/O2_float_param.exp: scenario=all: frame ... The problem is a GCC bug, filed as "PR98148 - [AArch64] Wrong location expression for function entry values" ( https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98148 ). Xfail the test for aarch64 and gcc 7. Tested on x86_64-linux and aarch64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29418 2022-09-07 Tom de Vries [gdb/testsuite] Fix gdb.ada/access_tagged_param.exp for aarch64 On aarch64-linux, I run into: ... Breakpoint 2, pck.inspect (obj=0x430eb0 \ , =0) at pck.adb:17^M 17 procedure Inspect (Obj: access Top_T'Class) is^M (gdb) FAIL: gdb.ada/access_tagged_param.exp: continue ... while on x86_64-linux, I see: ... Breakpoint 2, pck.inspect (obj=0x62b2a0, =2) at pck.adb:19^M 19 null;^M (gdb) PASS: gdb.ada/access_tagged_param.exp: continue ... Note the different line numbers, 17 vs 19. The difference comes from the gdbarch_skip_prologue implementation. The amd64_skip_prologue implementation doesn't use gcc line numbers, and falls back to the architecture-specific prologue analyzer, which correctly skips past the prologue, to address 0x4022f7: ... 00000000004022ec : 4022ec: 55 push %rbp 4022ed: 48 89 e5 mov %rsp,%rbp 4022f0: 48 89 7d f8 mov %rdi,-0x8(%rbp) 4022f4: 89 75 f4 mov %esi,-0xc(%rbp) 4022f7: 90 nop 4022f8: 90 nop 4022f9: 5d pop %rbp 4022fa: c3 ret ... The aarch64_skip_prologue implementation does use gcc line numbers, which are: ... File name Line number Starting address View Stmt pck.adb 17 0x402580 x pck.adb 17 0x402580 1 x pck.adb 19 0x40258c x pck.adb 20 0x402590 x ... and which are represented like this internally in gdb: ... INDEX LINE ADDRESS IS-STMT PROLOGUE-END 0 17 0x0000000000402580 Y 1 17 0x0000000000402580 Y 2 19 0x000000000040258c Y 3 20 0x0000000000402590 Y 4 END 0x00000000004025a0 Y ... The second entry is interpreted as end-of-prologue, so 0x402580 is used, while the actual end of the prologue is at 0x40258c: ... 0000000000402580 : 402580: d10043ff sub sp, sp, #0x10 402584: f90007e0 str x0, [sp, #8] 402588: b90007e1 str w1, [sp, #4] 40258c: d503201f nop 402590: d503201f nop 402594: 910043ff add sp, sp, #0x10 402598: d65f03c0 ret 40259c: d503201f nop ... Note that the architecture-specific prologue analyzer would have gotten this right: ... (gdb) p /x aarch64_analyze_prologue (gdbarch, pc, pc + 128, 0) $2 = 0x40258c ... Fix the FAIL by making the test-case more robust against problems in prologue skipping, by setting the breakpoint on line 19 instead. Likewise in a few similar test-cases. Tested on x86_64-linux and aarch64-linux. 2022-09-07 Luis Machado Tom de Vries Fix endianness handling for arm record self tests v2: - Add 32-bit Arm instruction selftest - Refactored abstract memory reader into abstract instruction reader - Adjusted code to use templated type and to use host endianness as opposed to target endianness. The arm record tests handle 16-bit and 32-bit thumb instructions, but the code is laid out in a way that handles the 32-bit thumb instructions as two 16-bit parts. This is fine, but it is prone to host-endianness issues given how the two 16-bit parts are stored and how they are accessed later on. Arm is little-endian by default, so running this test with a GDB built with --enable-targets=all and on a big endian host will run into the following: Running selftest arm-record. Process record and replay target doesn't support syscall number -2036195 Process record does not support instruction 0x7f70ee1d at address 0x0. Self test failed: self-test failed at ../../binutils-gdb/gdb/arm-tdep.c:14482 It turns out the abstract memory reader class is more generic than it needs to be, and we can simplify the code a bit by assuming we have a simple instruction reader that only reads up to 4 bytes, which is the length of a 32-bit instruction. Instead of returning a bool, we return instead the instruction that has been read. This way we avoid having to deal with the endianness conversion, and use the host endianness instead. The Arm selftests can be executed on non-Arm hosts. While at it, Tom suggested adding a 32-bit Arm instruction selftest to increase the coverage of the selftests. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29432 2022-09-07 Tom de Vries [gdb/testsuite] Use prototype to call libc functions On openSUSE Tumbleweed (using glibc 2.36), I run into: ... (gdb) print /d (int) munmap (4198400, 4096)^M Invalid cast.^M (gdb) FAIL: gdb.base/break-main-file-remove-fail.exp: cmdline: \ get integer valueof "(int) munmap (4198400, 4096)" ... The problem is that after starting the executable, the symbol has type "void (*) (void)": ... (gdb) p munmap $1 = {} 0x401030 (gdb) start ... (gdb) p munmap $2 = {void (void)} 0x7ffff7feb9a0 <__GI_munmap> ... which causes the "Invalid cast" error. Looking at the debug info for glibc for symbol __GI_munmap: ... <0><189683>: Abbrev Number: 1 (DW_TAG_compile_unit) <189691> DW_AT_name : ../sysdeps/unix/syscall-template.S <189699> DW_AT_producer : GNU AS 2.39.0 <1><1896ae>: Abbrev Number: 2 (DW_TAG_subprogram) <1896af> DW_AT_name : __GI___munmap <1896b3> DW_AT_external : 1 <1896b4> DW_AT_low_pc : 0x10cad0 <1896bc> DW_AT_high_pc : 37 ... that's probably caused by this bit (or similar bits for other munmap aliases). This is fixed in gas on trunk by commit 5578fbf672e ("GAS: Add a return type tag to DWARF DIEs generated for function symbols"). Work around this (for say gas 2.39) by explicitly specifying the prototype for munmap. Likewise for getpid in a couple of other test-cases. Tested on x86_64-linux. 2022-09-07 mengqinggang LoongArch: fix gas BFD_RELOC_8/16/24 bug If fixP->fx_subsy is NULL, BFD_RELOC_8/16/24 can't convert to BFD_RELOC_LARCH_xxx. gas/config/tc-loongarch.c 2022-09-07 GDB Administrator Automatic date update in version.in 2022-09-06 Aaron Merey Nick Clifton Add debuginfod support for objdump -S Currently objdump -S is not able to make use files downloaded from debuginfod. This is due to bfd_find_nearest_line_discriminator being unable to locate any separate debuginfo files in the debuginfod cache. Additionally objdump lacked a call to debuginfod_find_source in order to download missing source files. Fix this by using bfd_find_nearest_line_with_alt instead of bfd_find_nearest_line_discriminator. Also add a call to debuginfod_find_source in order to download missing source files. 2022-09-06 Aaron Merey bfd: Add bfd_find_nearest_line_with_alt bfd_find_nearest_line_with_alt functions like bfd_find_nearest_line with the addition of a parameter for specifying the filename of a supplementary debug file such as one referenced by .gnu_debugaltlink or .debug_sup. This patch focuses on implementing bfd_find_nearest_line_with_alt support for ELF/DWARF2 .gnu_debugaltlink. For other targets this function simply sets the invalid_operation bfd_error. 2022-09-06 Tsukasa OI gdb: add Tsukasa Oi to gdb/MAINTAINERS 2022-09-06 Andrew Burgess gdb: move a write after approval entry into the correct place Noticed in passing that an entry in the MAINTAINERS write after approval list was in the wrong place. 2022-09-06 Tsukasa OI gdb: Add non-enum disassembler options This is paired with "opcodes: Add non-enum disassembler options". There is a portable mechanism for disassembler options and used on some architectures: - ARC - Arm - MIPS - PowerPC - RISC-V - S/390 However, it only supports following forms: - [NAME] - [NAME]=[ENUM_VALUE] Valid values for [ENUM_VALUE] must be predefined in disasm_option_arg_t.values. For instance, for -M cpu=[CPU] in ARC architecture, opcodes/arc-dis.c builds valid CPU model list from include/elf/arc-cpu.def. In this commit, it adds following format: - [NAME]=[ARBITRARY_VALUE] (cannot contain "," though) This is identified by NULL value of disasm_option_arg_t.values (normally, this is a non-NULL pointer to a NULL-terminated list). gdb/ChangeLog: * gdb/disasm.c (set_disassembler_options): Add support for non-enum disassembler options. (show_disassembler_options_sfunc): Likewise. 2022-09-06 Tom de Vries [gdb/symtab] Support .debug_names section with TUs in .debug_info When running test-case gdb.cp/cpexprs-debug-types.exp on target board cc-with-debug-names/gdb:debug_flags=-gdwarf-5, we get an executable with a .debug_names section, but no .debug_types section. For dwarf-5, the TUs are no longer put in a separate unit, but instead they're put in the .debug_info section. When loading the executable, the .debug_names section is silently ignored because of this check in dwarf2_read_debug_names: ... if (map->tu_count != 0) { /* We can only handle a single .debug_types when we have an index. */ if (per_bfd->types.size () != 1) return false; ... which triggers because per_bfd->types.size () == 0. The intention of the check is to make sure we don't have more that one .debug_types section, as can happen in a object file (see PR12984): ... $ grep "\.debug_types" 11.s .section .debug_types,"G",@progbits,wt.75c042c23a9a07ee,comdat .section .debug_types,"G",@progbits,wt.c59c413bf50a4607,comdat ... Fix this by: - changing the check condition to "per_bfd->types.size () > 1", and - handling per_bfd->types.size () == 0. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29385 2022-09-06 Tom de Vries [gdb/testsuite] Add gdb.dwarf2/debug-names-bad-cu-index.exp Add test-case gdb.dwarf2/debug-names-bad-cu-index.exp, a regression test for commit 2fe9a3c41fa ("[gdb/symtab] Fix bad compile unit index complaint"). Tested on x86_64-linux. 2022-09-06 Tom de Vries [gdb/testsuite] Add gdb.dwarf2/debug-names-tu.exp Add a test-case gdb.dwarf2/debug-names-tu.exp, that uses the dwarf assembler to specify a .debug_names index with the TU list referring to a TU from the .debug_types section. This is intended to produce something similar to: ... $ gcc -g -fdebug-types-section ~/hello.c -gdwarf-4 $ gdb-add-index -dwarf-5 a.out ... Tested on x86_64-linux. 2022-09-06 Tsukasa OI opcodes: Add non-enum disassembler options This is paired with "gdb: Add non-enum disassembler options". There is a portable mechanism for disassembler options and used on some architectures: - ARC - Arm - MIPS - PowerPC - RISC-V - S/390 However, it only supports following forms: - [NAME] - [NAME]=[ENUM_VALUE] Valid values for [ENUM_VALUE] must be predefined in disasm_option_arg_t.values. For instance, for -M cpu=[CPU] in ARC architecture, opcodes/arc-dis.c builds valid CPU model list from include/elf/arc-cpu.def. In this commit, it adds following format: - [NAME]=[ARBITRARY_VALUE] (cannot contain "," though) This is identified by NULL value of disasm_option_arg_t.values (normally, this is a non-NULL pointer to a NULL-terminated list). include/ChangeLog: * dis-asm.h (disasm_option_arg_t): Update comment of values to allow non-enum disassembler options. opcodes/ChangeLog: * riscv-dis.c (print_riscv_disassembler_options): Support non-enum disassembler options on printing disassembler help. * arc-dis.c (print_arc_disassembler_options): Likewise. * mips-dis.c (print_mips_disassembler_options): Likewise. 2022-09-06 GDB Administrator Automatic date update in version.in 2022-09-05 Tsukasa OI sim/riscv: Complete tidying up with SBREAK This commit removes SBREAK-related references on the simulator as it's renamed to EBREAK in 2016 (the RISC-V ISA, version 2.1). sim/ChangeLog: * riscv/sim-main.c (execute_i): Use "ebreak" instead of "sbreak". 2022-09-05 GDB Administrator Automatic date update in version.in 2022-09-04 Andrew Burgess sim/erc32: fix gdb with simulator build In commit: commit 7b01c1cc1d111ba0afa51e60fa9842d3b971e2d1 Date: Mon Apr 4 22:38:04 2022 +0100 sim: fixes for libopcodes styled disassembler changes were made to the simulator source to handle the new libopcodes disassembler styling API. Unfortunately, these changes broke building GDB with the erc32 (sparc) simulator, like this: ../src/configure --target=sparc-linux make all-gdb .... /usr/bin/ld: ../sim/erc32/libsim.a(interf.o): in function `sim_open': /tmp/build/sim/../../src/sim/erc32/interf.c:247: undefined reference to `fprintf_styled' collect2: error: ld returned 1 exit status The problem is that in commit 7b01c1cc1d11 the fprintf_styled function was added into sis.c. This file is only used when building the 'run' binary, that is, the standalone simulator, and is not included in the libsim.a library. Now, the obvious fix would be to move fprintf_styled into libsim.a, however, that turns out to be tricky. The erc32 simulator currently has two copies of the function run_sim, one in sis.c, and one in interf.c, both of these copies are global. Currently, the 'run' binary links fine, though I suspect this might be pure luck. When I tried moving fprintf_styled into interf.c, I ran into multiple-definition (of run_sim) errors. I suspect that by requiring the linker to pull in fprintf_styled from libsim.a I was changing the order in which symbols were loaded, and the linker was now seeing both copies of run_sim, while currently we only see one copy. The ideal solution of course, would be to merge the two similar, but slightly different copies of run_sim, and just use the one copy. Then we could safely move fprintf_styled into interf.c too, and all would be good. But I don't have time right now to start debugging the erc32 simulator, so I wanted a solution that fixes the build without introducing multiple definition errors. The easiest solution I think is to just have two copies of fprintf_styled, one in sis.c, and one in interf.c. Unlike run_sim, these two copies are both static, so we will not run into multiple definition issues with this function. The functions themselves are not very big, so it's not a huge amount of duplicate code. I am very aware that this is not an ideal solution, and I would welcome anyone who wants to take on fixing the run_sim problem properly, and then cleanup the fprintf_styled duplication. 2022-09-04 GDB Administrator Automatic date update in version.in 2022-09-03 GDB Administrator Automatic date update in version.in 2022-09-02 Max Filippov xtensa: bfd: fix TLS relocations generated for PIE When generating TLS dynamic relocations the existing xtensa BFD code treats linking to a PIE exactly as linking to a shared object, resulting in generation of wrong relocations for TLS entries. Fix that and add tests. bfd/ * elf32-xtensa.c (elf_xtensa_check_relocs): Use bfd_link_dll instead of bfd_link_pic. Add elf_xtensa_dynamic_symbol_p test when generating GOT entries. (elf_xtensa_relocate_section): Use bfd_link_dll instead of bfd_link_pic. ld/ * testsuite/ld-xtensa/tlspie.dd: New file. * testsuite/ld-xtensa/tlspie.rd: New file. * testsuite/ld-xtensa/tlspie.sd: New file. * testsuite/ld-xtensa/tlspie.td: New file. * testsuite/ld-xtensa/xtensa-linux.exp (TLS PIE transitions): New test. 2022-09-02 Max Filippov xtensa: adjust expected output in ld TLS tests objdump output for l32r opcode was changed in commit b3ea76397a07 ("opcodes: xtensa: display loaded literal value"), but xtensa linker TLS relaxation tests weren't adjusted accordingly. readelf output was changed in commit 23356397449a ("Adjust readelf's output so that section symbols without a name as shown with their section name."), but xtensa linker TLS relaxation tests weren't adjusted accordingly. Fix expected output changes in xtensa ld TLS relaxation tests. ld/ * testsuite/ld-xtensa/tlsbin.dd: Adjust expected output for l32r opcodes. * testsuite/ld-xtensa/tlsbin.rd: Adjust expected output to allow for named section symbols. * testsuite/ld-xtensa/tlspic.dd: Adjust expected output for l32r opcodes. * testsuite/ld-xtensa/tlspic.rd: Adjust expected output to allow for named section symbols. 2022-09-02 Frederic Cambus Add OpenBSD ARM Little Endian BFD support. * config.bfd (arm-*-openbsd*): Restore target. 2022-09-02 Tsukasa OI RISC-V: Print highest address (-1) on the disassembler This patch makes possible to print the highest address (-1) and the addresses related to gp which value is -1. This is particularly useful if the highest address space is used for I/O registers and corresponding symbols are defined. Besides, despite that it is very rare to have GP the highest address, it would be nice because we enabled highest address printing on regular cases. gas/ChangeLog: * testsuite/gas/riscv/dis-addr-topaddr.s: New test for the top address (-1) printing. * testsuite/gas/riscv/dis-addr-topaddr-32.d: Likewise. * testsuite/gas/riscv/dis-addr-topaddr-64.d: Likewise. * testsuite/gas/riscv/dis-addr-topaddr-gp.s: New test for GP-relative addressing when GP is the highest address (-1). * testsuite/gas/riscv/dis-addr-topaddr-gp-32.d: Likewise. * testsuite/gas/riscv/dis-addr-topaddr-gp-64.d: Likewise. opcodes/ChangeLog: * riscv-dis.c (struct riscv_private_data): Add `to_print_addr' to enable printing the highest address. (maybe_print_address): Utilize `to_print_addr'. (riscv_disassemble_insn): Likewise. 2022-09-02 Tsukasa OI RISC-V: PR29342, Fix RV32 disassembler address computation If either the base register is `zero', `tp' or `gp' and XLEN is 32, an incorrectly sign-extended address is produced when printing. This commit fixes this by fitting an address into a 32-bit value on RV32. Besides, H. Peter Anvin discovered that we have wrong address computation for JALR instruction (the initial bug is back in 2018). This commit also fixes that based on the idea of Palmer Dabbelt. gas/ pr29342 * testsuite/gas/riscv/lla32.d: Reflect RV32 address computation fix. * testsuite/gas/riscv/dis-addr-overflow.s: New testcase. * testsuite/gas/riscv/dis-addr-overflow-32.d: Likewise. * testsuite/gas/riscv/dis-addr-overflow-64.d: Likewise. opcodes/ pr29342 * riscv-dis.c (maybe_print_address): Fit address into 32-bit on RV32. (print_insn_args): Fix JALR address by adding EXTRACT_ITYPE_IMM. 2022-09-02 Tsukasa OI RISC-V: Add address printer tests with ADDIW Address sequences involving ADDIW/C.ADDIW instructions require special handling to sign-extend lower 32-bits of the original result. This commit tests whether this sign-extension works. gas/ChangeLog: * testsuite/gas/riscv/dis-addr-addiw.s: New to test the address computation with sign extension as used in ADDIW/C.ADDIW. * testsuite/gas/riscv/dis-addr-addiw-a.d: Test PC sign bit 0. * testsuite/gas/riscv/dis-addr-addiw-b.d: Test PC sign bit 1. gas/ChangeLog: * testsuite/gas/riscv/dis-addr-addiw-a.d: New test. * testsuite/gas/riscv/dis-addr-addiw-b.d: New test. * testsuite/gas/riscv/dis-addr-addiw.s: New test. 2022-09-02 GDB Administrator Automatic date update in version.in 2022-09-01 Tsukasa OI sim: Update mailing list address The commit bf1102165389 "* MAINTAINERS: Perform some obvious fixups." back in 2009 changed the mailing list address gdb-patches@sources.redhat.com to gdb-patches@sourceware.org. This commit does the same to sim/MAINTAINERS. sim/ChangeLog: * MAINTAINERS: Update mailing list address. Change-Id: I56c6bf21a4bddfb35ffc3336ffcba7ff9b39926e 2022-09-01 Nick Clifton dllwrap, windres and dlltools use mktemp, which should be avoided PR 29534 * dllwrap.c: Replace uses of choose_temp_base() with make_temp_file(). * dlltool.c: Likewise. * resrc.c: Likewise. 2022-09-01 Maciej W. Rozycki GDB/doc: Document the Guile `#:unlimited' keyword Document the Guile `#:unlimited' keyword and deprecate the internal integer representation it corresponds to for integer parameters. 2022-09-01 Lancelot SIX gdb/python-config: replace deprecated distutils.sysconfig When running the gdb/configure script on ubuntu 22.04 with python-3.10.4, I see: checking for python... no checking for python3... /usr/bin/python3 [...]/gdb/python/python-config.py:7: DeprecationWarning: The distutils package is deprecated and slated for removal in Python 3.12. Use setuptools or check PEP 632 for potential alternatives from distutils import sysconfig [...]/gdb/python/python-config.py:7: DeprecationWarning: The distutils.sysconfig module is deprecated, use sysconfig instead from distutils import sysconfig [...]/gdb/python/python-config.py:7: DeprecationWarning: The distutils package is deprecated and slated for removal in Python 3.12. Use setuptools or check PEP 632 for potential alternatives from distutils import sysconfig [...]/gdb/python/python-config.py:7: DeprecationWarning: The distutils.sysconfig module is deprecated, use sysconfig instead from distutils import sysconfig [...]/gdb/python/python-config.py:7: DeprecationWarning: The distutils package is deprecated and slated for removal in Python 3.12. Use setuptools or check PEP 632 for potential alternatives from distutils import sysconfig [...]/gdb/python/python-config.py:7: DeprecationWarning: The distutils.sysconfig module is deprecated, use sysconfig instead from distutils import sysconfig checking for python... yes The distutils module is deprecated as per the PEP 632[1] and will be removed in python-3.12. This patch migrates gdb/python/python-config.py from distutils.sysconfig to the sysconfig module[2]. The sysconfig module has has been introduced in the standard library in python 3.2. Given that support for python < 3.2 has been removed by edae3fd6600f: "gdb/python: remove Python 2 support", this patch does not need to support both implementations for backward compatibility. Tested on ubuntu-22.04 and ubuntu 20.04. [1] https://peps.python.org/pep-0632/ [2] https://docs.python.org/3/library/sysconfig.html Change-Id: Id0df2baf3ee6ce68bd01c236b829ab4c0a4526f6 2022-09-01 GDB Administrator Automatic date update in version.in 2022-08-31 Tom Tromey Fix interpreter-exec crash PR mi/10347 points out that using interpreter-exec inside of a "define" command will crash gdb. The bug here is that gdb_setup_readline doesn't check for the case where instream==nullptr. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=10347 2022-08-31 Tom Tromey Fix "source" with interpreter-exec PR mi/15811 points out that "source"ing a file that uses interpreter-exec will put gdb in a weird state, where the CLI stops working. The bug is that tui_interp::suspend does not unregister the event file descriptor. The test case is from Andrew Burgess. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=15811 2022-08-31 Tom Tromey Remove a call to clear_interpreter_hooks mi_interp::resume does not need to call clear_interpreter_hooks, because this is already done by interp_set. TUI stdout buffering cleanup The TUI checks against gdb_stdout to decide when to buffer. It seems much cleaner to me to simply record this as an attribute of the stream itself. Remove a ui-related memory leak gdb_setup_readline makes new streams and assigns to the various stream members of struct ui. However, these assignments cause the previous values to leak. As far as I can, this code is simply unnecessary and can be removed -- with the exception of the assignment to gdb_stdtarg, which is not initialized anywhere else. Remove tui_out_new tui_out_new is just a simple wrapper for 'new' and can be removed, simplifying gdb a tiny bit. Use scoped_restore in safe_parse_type This changes safe_parse_type to use scoped_restore rather than explicit assignments. Use member initialization in 'struct ui' This changes 'struct ui' to use member initialization. This is simpler to understand. Remove two unused members from mi_interp These members of mi_interp aren't used and can be removed. Remove obsolete filtering comment top.h has an obsolete comment about the use of _unfiltered. Remove the "for moment" comments A few spots setting some gdb output stream variables have a "for moment" comment. These comments aren't useful and I think the moment has passed -- these are permanent now. Use ui_out_redirect_pop in more places This changes ui_out_redirect_pop to also perform the redirection, and then updates several sites to use this, rather than explicit redirects. Free ui::line_buffer A ui initializes its line_buffer, but never calls buffer_free on it. This patch fixes the oversight. I found this by inspection. Remove some dead code This patch removes some dead code and an old FIXME. These no longer seem useful, even for documentation purposes. Let ui::input_fd be -1 This changes gdb so that, if ui::input_fd is set to -1, then it will not be registered with the event loop. This is useful for the DAP support code I wrote, but as it turns out to also be useful to Insight, it seems best to check it in separately. 2022-08-31 Andrew Burgess gdb/riscv: better support for fflags and frm registers First, some background on the RISC-V registers fflags, frm, and fcsr. These three registers all relate to the floating-point status and control mechanism on RISC-V. The fcsr is the floatint-point control status register, and consists of two parts, the flags (bits 0 to 4) and the rounding-mode (bits 5 to 7). The fcsr register is just one of many control/status registers (or CSRs) available on RISC-V. The fflags and frm registers are also CSRs. These CSRs are aliases for the relevant parts of the fcsr register. So fflags is an alias for bits 0 to 4 of fcsr, and frm is an alias for bits 5 to 7 of fcsr. This means that a user can change the floating-point rounding mode either, by writing a complete new value into fcsr, or by writing just the rounding mode into frm. How this impacts on GDB is like this: a target description could, legitimately include all three registers, fcsr, fflags, and frm. The QEMU target currently does this, and this makes sense. The target is emulating the complete system, and has all three CSRs available, so why not tell GDB about this. In contrast, the RISC-V native Linux target only has access to the fcsr. This is because the ptrace data structure that the kernel uses for reading and writing floating point state only contains a copy of the fcsr, after all, this one field really contains both the fflags and frm fields, so why carry around duplicate data. So, we might expect that the target description for the RISC-V native Linux GDB would only contain the fcsr register. Unfortunately, this is not the case. The RISC-V native Linux target uses GDB's builtin target descriptions by calling riscv_lookup_target_description, this will then add an fpu feature from gdb/features/riscv, either 32bit-fpu.xml or 64bit-fpu.xml. The problem, is that these features include an entry for fcsr, fflags, and frm. This means that GDB expects the target to handle reading and writing these registers. And the RISC-V native Linux target currently doesn't. In riscv_linux_nat_target::store_registers and riscv_linux_nat_target::fetch_registers only the fcsr register is handled, this means that, for RISC-V native Linux, the fflags and frm registers always show up as - they are present in the target description, but the target doesn't know how to access the registers. A final complication relating to these floating pointer CSRs is which target description feature the registers appear in. These registers are CSRs, so it would seem sensible that these registers should appear in the CSR target description feature. However, when I first added RISC-V target description support, I was using a RISC-V simulator that didn't support any CSRs other than the floating point related ones. This simulator bundled all the float related CSRs into the fpu target feature. This didn't feel completely unreasonable to me, and so I had GDB check for these registers in either target feature. In this commit I make some changes relating to how GDB handles the three floating point CSR: 1. Remove fflags and frm from 32bit-fpu.xml and 64bit-fpu.xml. This means that the default RISC-V target description (which RISC-V native FreeBSD), and the target descriptions created for RISC-V native Linux, will not include these registers. There's nothing stopping some other target (e.g. QEMU) from continuing to include all three of these CSRs, the code in riscv-tdep.c continues to check for all three of these registers, and will handle them correctly if they are present. 2. If a target supplied fcsr, but does not supply fflags and/or frm, then RISC-V GDB will now create two pseudo registers in order to emulate the two missing CSRs. These new pseudo-registers do the obvious thing of just reading and writing the fcsr register. 3. With the new pseudo-registers we can no longer make use of the GDB register numbers RISCV_CSR_FFLAGS_REGNUM and RISCV_CSR_FRM_REGNUM. These will be the numbers used if the target supplies the registers in its target description, but, if GDB falls back to using pseudo-registers, then new, unique numbers will be used. To handle this I've added riscv_gdbarch_tdep::fflags_regnum and riscv_gdbarch_tdep::frm_regnum, I've then updated the RISC-V code to compare against these fields. When adding the pseudo-register support, it is important that the pseudo-register numbers are calculated after the call to tdesc_use_registers. This is because we don't know the total number of physical registers until after this call, and the psuedo-register numbers must follow on from the real (target supplied) registers. I've updated some tests to include more testing of the fflags and frm registers, as well as adding a new test. 2022-08-31 Andrew Burgess gdb: Add tdesc_found_register function to tdesc API This commit adds a new function to the target description API within GDB. This new function is not used in this commit, but will be used in the next commit, I'm splitting it out into a separate patch for easier review. What I want to do in the next commit is check to see if a target description supplied a particular register, however, the register in question could appear in one of two possible features. The new function allows me to ask the tdesc_arch_data whether a register was found and assigned a particular GDB register number once all of the features have been checked. I think this is a much simpler solution than adding code such that, while checking each feature, I spot if the register I'm processing is the one I care about. No tests here as the new code is not used, but this code will be exercised in the next commit. 2022-08-31 Andrew Burgess gdb/riscv: improve (and fix) display of frm field in 'info registers' On RISC-V the FCSR (float control/status register) is split into two parts, FFLAGS (the flags) and FRM (the rounding mode). Both of these two fields are part of the FCSR register, but can also be accessed as separate registers in their own right. And so, we have three separate registers, $fflags, $frm, and $fcsr, with the last of these being the combination of the first two. Here's how the bits of FCSR are split between FRM and FFLAGS: ,--------- FFLAGS |---| 76543210 <----- FCSR |-| '--------------FRM Here's how GDB currently displays these registers: (gdb) info registers $fflags $frm $fcsr fflags 0x0 RD:0 NV:0 DZ:0 OF:0 UF:0 NX:0 frm 0x0 FRM:0 [RNE (round to nearest; ties to even)] fcsr 0x0 RD:0 NV:0 DZ:0 OF:0 UF:0 NX:0 FRM:0 [RNE (round to nearest; ties to even)] Notice the 'RD' field which is present in both $fflags and $fcsr. This field contains the value of the FRM field, which makes sense when displaying the $fcsr, but makes no sense when displaying $fflags, as the $fflags doesn't include the FRM field. Additionally, the $fcsr already includes an FRM field, so the information in 'RD' is duplicated. Consider this: (gdb) set $frm = 0x3 (gdb) info registers $fflags $frm $fcsr │ fflags 0x0 RD:0 NV:0 DZ:0 OF:0 UF:0 NX:0 frm 0x3 FRM:3 [RUP (Round up towards +INF)] fcsr 0x60 RD:3 NV:0 DZ:0 OF:0 UF:0 NX:0 FRM:3 [RUP (Round up towards +INF)] See how the 'RD' field in $fflags still displays 0, while the 'RD' and 'FRM' fields in $fcsr show the same information. The first change I propose in this commit is to remove the 'RD' field. After this change the output now looks like this: (gdb) info registers $fflags $frm $fcsr fflags 0x0 NV:0 DZ:0 OF:0 UF:0 NX:0 frm 0x0 FRM:0 [RNE (round to nearest; ties to even)] fcsr 0x0 NV:0 DZ:0 OF:0 UF:0 NX:0 FRM:0 [RNE (round to nearest; ties to even)] Next, I spotted that the text that goes along with the 'FRM' field was not wrapped in the i18n markers for internationalisation, so I added those. Next, I spotted that: (gdb) set $frm=0x7 (gdb) info registers $fflags $frm $fcsr fflags 0x0 RD:0 NV:0 DZ:0 OF:0 UF:0 NX:0 frm 0x7 FRM:3 [RUP (Round up towards +INF)] fcsr 0xe0 RD:7 NV:0 DZ:0 OF:0 UF:0 NX:0 FRM:3 [RUP (Round up towards +INF)] Notice that despite being a 3-bit field, FRM masks to 2-bits. Checking the manual I can see that the FRM field is 3-bits, and is defined for all 8 values. That GDB masks to 2-bits is just a bug I think, so I've fixed this. Finally, the 'FRM' text for value 0x7 is wrong. Currently we use the text 'dynamic rounding mode' for value 0x7. However, this is not really correct. A RISC-V instruction can either encode the rounding mode within the instruction, or a RISC-V instruction can choose to use a global, dynamic rounding mode. So, for the rounding-mode field of an _instruction_ the value 0x7 indicates "dynamic round mode", the instruction should defer to the rounding mode held in the FRM field of the $fcsr. But it makes no sense for the FRM of $fcsr to itself be set to 0x7 (dynamic rounding mode), and indeed, section 11.2, "Floating-Point Control and Status Register" of the RISC-V manual, says that a value of 0x7 in the $fcsr FRM field is invalid, and if an instruction has _its_ round-mode set to dynamic, and the FRM field is also set to 0x7, then an illegal instruction exception is raised. And so, I propose changing the text for value 0x7 of the FRM field to be "INVALID[7] (Dynamic rounding mode)". We already use the text "INVALID[5]" and "INVALID[6]" for the two other invalid fields, however, I think adding the extra "Dynamic round mode" hint might be helpful. I've added a new test that uses 'info registers' to check what GDB prints for the three registers related to this patch. There is one slight oddity with this test - for the fflags and frm registers, the test accepts both the "normal" output (as described above), but also allows these registers to be reported as ''. The reason why I accept is that currently, the RISC-V, native Linux target advertises these registers in its target description, but then doesn't support reading or writing of these registers, this results in the registers being reported as unavailable. A later patch in this series will address this issue, and will remove this check for . 2022-08-31 Frederic Cambus Add OpenBSD AArch64 GAS support. * configure.tgt (aarch64*-*-openbsd*): Add target. 2022-08-31 Nils-Christian Kempke gdb, dwarf: create symbols for template tags without names The following GDB behavior was also reported as a GDB bug in https://sourceware.org/bugzilla/show_bug.cgi?id=28396 I will reiterate the problem a bit and give some more information here. This patch closes the above mentioned bug. The DWARF 5 standard 2.23 'Template Parameters' reads: A template type parameter is represented by a debugging information entry with the tag DW_TAG_template_type_parameter. A template value parameter is represented by a debugging information entry with the tag DW_TAG_template_value_parameter. The actual template parameter entries appear in the same order as the corresponding template formal parameter declarations in the source progam. A type or value parameter entry may have a DW_AT_name attribute, whose value is a null-terminated string containing the name of the corresponding formal parameter. So the DW_AT_name attribute for DW_TAG_template_type_parameter and DW_TAG_template_value_parameter is optional. Within GDB, creating a new symbol from some read DIE usually requires the presence of a DW_AT_name for the DIE (an exception here is the case of unnamed namespaces or the existence of a linkage name). This patch makes the presence of the DW_AT_name for template value/type tags optional, similar to the unnamed namespaces. For unnamed namespaces dwarf2_name simply returns the constant string CP_ANONYMOUS_NAMESPACE_STR '(anonymous namespace)'. For template tags a case was added to the switch statement calling the unnamed_template_tag_name helper. Within the scope of parent which the template parameter is a child of, the helper counts the position of the template tag within the unnamed template tags and returns '' where NUMBER is its position. This way we end up with unique names within the respective scope of the function/class/struct (these are the only currenltly supported template kinds within GDB and usually the compilers) where we discovered the template tags in. While I do not know of a way to bring GCC to emit template tags without names there is one for clang/icpx. Consider the following example template class Foo {}; template class Foo; int main () { Foo f; return 0; } The forward declaration for 'Foo' with the missing template type names 'A' and 'C' makes clang emit a bunch of template tags without names: ... <2><43>: Abbrev Number: 3 (DW_TAG_variable) <44> DW_AT_location : 2 byte block: 91 78 (DW_OP_fbreg: -8) <47> DW_AT_name : (indirect string, offset: 0x63): f <4b> DW_AT_decl_file : 1 <4c> DW_AT_decl_line : 8 <4d> DW_AT_type : <0x59> ... <1><59>: Abbrev Number: 5 (DW_TAG_class_type) <5a> DW_AT_calling_convention: 5 (pass by value) <5b> DW_AT_name : (indirect string, offset: 0x74): Foo <5f> DW_AT_byte_size : 1 <60> DW_AT_decl_file : 1 <61> DW_AT_decl_line : 2 <2><62>: Abbrev Number: 6 (DW_TAG_template_type_param) <63> DW_AT_type : <0x76> <2><67>: Abbrev Number: 7 (DW_TAG_template_type_param) <68> DW_AT_type : <0x52> <6c> DW_AT_name : (indirect string, offset: 0x6c): B <2><70>: Abbrev Number: 6 (DW_TAG_template_type_param) <71> DW_AT_type : <0x7d> ... Befor this patch, GDB would not create any symbols for the read template tag DIEs and thus lose knowledge about them. Breaking at the return statement and printing f's type would read (gdb) ptype f type = class Foo [with B = int] { } After this patch GDB does generate symbols from the DWARF (with their artificial names: (gdb) ptype f type = class Foo [with = double, B = int, = float] { } The same principle theoretically applies to template functions. Also here, GDB would not record unnamed template TAGs but I know of no visual way to trigger and test this changed behavior. Template functions do not emit a '[with...]' list and their name generation also does not suffer from template tags without names. GDB does not check whether or not a template tag has a name in 'dwarf2_compute_name' and thus, the names of the template functions are created independently of whether or not the template TAGs have a DW_TAT_name attribute. A testcase has been added in the gdb.dwarf2 for template classes and structs. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28396 2022-08-31 Nils-Christian Kempke gdb, testsuite: adapt function_range expected name When writing a dwarf testcase for some C++ code I wanted to use the MACRO_AT_range which in turn uses the function_range proc in dwarf.exp to extract the bounds of 'main'. However, the macro failed as GDB prints the C++ 'main' with its arguments as 'main(int, char**)' or 'main()'. The reason for this is that in read.c::dwarf2_compute_name we call c_type_print_args on C++ functions and append their arguments to the function name. This happens to all C++ functions, but is only visible when the function doesn't have a linkage name. An example might make this more clear. Given the following code >> cat c.cpp int foo (int a, float b) { return 0; } int main (int argc, char **argv) { return 0; } which is legal in both languages, C and C++, and compiling it with e.g. clang or gcc will make the disassemble command look like: >> clang --version clang version 10.0.0-4ubuntu1 ... >> clang -O0 -g ./c.cpp >> gdb -q ./a.out -ex "start" ... (gdb) disassemble main Dump of assembler code for function main(int, char**): 0x0000000000401120 <+0>: push %rbp 0x0000000000401121 <+1>: mov %rsp,%rbp ... 0x0000000000401135 <+21>: ret End of assembler dump. (gdb) disassemble foo Dump of assembler code for function _Z3fooif: 0x0000000000401110 <+0>: push %rbp 0x0000000000401111 <+1>: mov %rsp,%rbp ... 0x000000000040111f <+15>: ret End of assembler dump. Note, that main is emitted with its arguments while for foo the linkage name is being printed, as also visible in its DWARF: >> objdump ./a.out --dwarf=info | grep "foo" -A3 -B3 <2b> DW_AT_low_pc : 0x401110 <33> DW_AT_high_pc : 0x10 <37> DW_AT_frame_base : 1 byte block: 56 (DW_OP_reg6 (rbp)) <39> DW_AT_linkage_name: (indirect string, offset: 0x39): _Z3fooif <3d> DW_AT_name : (indirect string, offset: 0x42): foo <41> DW_AT_decl_file : 1 <42> DW_AT_decl_line : 1 <43> DW_AT_type : <0x9a> Now, let's rename the C++ file and compile it as C: >> mv c.cpp c.c >> clang -O0 -g ./c.c >> gdb -q ./a.out -ex "start' ... (gdb) disassemble main Dump of assembler code for function main: 0x0000000000401120 <+0>: push %rbp 0x0000000000401121 <+1>: mov %rsp,%rbp ... 0x0000000000401135 <+21>: ret End of assembler dump. (gdb) disassemble foo Dump of assembler code for function foo: 0x0000000000401110 <+0>: push %rbp 0x0000000000401111 <+1>: mov %rsp,%rbp ... 0x000000000040111f <+15>: ret End of assembler dump. Note, for foo we did not get a linkage name emitted in DWARF, so it is printed by its name: >> objdump --dwarf=info ./a.out | grep foo -A3 -B3 <2b> DW_AT_low_pc : 0x401110 <33> DW_AT_high_pc : 0x10 <37> DW_AT_frame_base : 1 byte block: 56 (DW_OP_reg6 (rbp)) <39> DW_AT_name : (indirect string, offset: 0x37): foo <3d> DW_AT_decl_file : 1 <3e> DW_AT_decl_line : 1 <3f> DW_AT_prototyped : 1 To make the macro and proc work with C++ as well, an optional argument list was added to the regex matching the function name in the disassemble command in function_range. This does not change any used behavior as currently, there exists no C++ test using the proc function_range. 2022-08-31 Aaron Merey gdb/elfread.c: Use bfd filename instead of objfile->original_name The call to debuginfod_debuginfo_query in elf_symfile_read is given objfile->original_name as the filename to print when downloading the objfile's debuginfo. In some cases original_name is prefixed with gdb's working directory even though the objfile is not located in the working directory. This causes debuginfod to display the wrong path of the objfile during a download. Fix this by using the objfile's bfd filename instead. 2022-08-31 GDB Administrator Automatic date update in version.in 2022-08-30 Martin Storsjö ld: pe: Fix linking against Microsoft import libraries with multiple DLLs Initially, since c6c37250e98f113755e0d787f7070e2ac80ce77e (in 1999), in order to fix linking against Microsoft import libraries, ld did internally rename members of such libraries. At that point, the criteria for being considered a Microsoft import library was that every archive member had the same name (no regard for exactly what that name was). This was later amended in 44dbf3639f127af46d569ad96b6242dfbc4c0a89 (in 2003) to allow for Microsoft import libraries with intermixed static object files. At this point, the criteria were extended, so that all members following the first member named *.dll either had the exact same member name, or be named *.obj. (Curiously, this would allow members with any name if it precedes the first one named *.dll.) In practice, Microsoft style import libraries can contain members for linking against more than one DLL (built by merging multiple regular import libraries into one). Instead of trying to do validation of the whole archive before considering it a Microsoft style import library, relax the criteria for doing the member renaming: If an archive member is named *.dll and it contains .idata sections, assume that that member is a Microsoft import file, and apply the renaming scheme. This works for imports for any number of DLLs in the same library, intermixed with other static object files (regardless of their names), and vastly simplifies the code. LLVM generates Microsoft style import libraries, and Rust builds seem to bundle up multiple import libraries together with some Rust specific static objects. This fixes linking directly against them with ld.bfd. 2022-08-30 Simon Marchi gdbsupport: add wrapper around result_of and invoke_result When building with Clang 14 (using gcc 12 libstdc++ headers), I get: CXX dwarf2/read.o In file included from /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:94: /home/simark/src/binutils-gdb/gdb/../gdbsupport/parallel-for.h:142:21: error: 'result_of<(lambda at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:7124:5) (__gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator *, std::__cxx1998::vector>>, std::vector>, std::random_access_iterator_tag>, __gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator *, std::__cxx1998::vector>>, std::vector>, std::random_access_iterator_tag>)>' is deprecated: use 'std::invoke_result' instead [-Werror,-Wdeprecated-declarations] = typename std::result_of::type; ^ /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:7122:14: note: in instantiation of function template specialization 'gdb::parallel_for_each<__gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator *, std::__cxx1998::vector>>, std::vector>, std::random_access_iterator_tag>, (lambda at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:7124:5)>' requested here = gdb::parallel_for_each (1, per_bfd->all_comp_units.begin (), ^ /usr/bin/../lib64/gcc/x86_64-pc-linux-gnu/12.1.1/../../../../include/c++/12.1.1/type_traits:2597:9: note: 'result_of<(lambda at /home/simark/src/binutils-gdb/gdb/dwarf2/read.c:7124:5) (__gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator *, std::__cxx1998::vector>>, std::vector>, std::random_access_iterator_tag>, __gnu_debug::_Safe_iterator<__gnu_cxx::__normal_iterator *, std::__cxx1998::vector>>, std::vector>, std::random_access_iterator_tag>)>' has been explicitly marked deprecated here { } _GLIBCXX17_DEPRECATED_SUGGEST("std::invoke_result"); ^ /usr/bin/../lib64/gcc/x86_64-pc-linux-gnu/12.1.1/../../../../include/c++/12.1.1/x86_64-pc-linux-gnu/bits/c++config.h:120:45: note: expanded from macro '_GLIBCXX17_DEPRECATED_SUGGEST' # define _GLIBCXX17_DEPRECATED_SUGGEST(ALT) _GLIBCXX_DEPRECATED_SUGGEST(ALT) ^ /usr/bin/../lib64/gcc/x86_64-pc-linux-gnu/12.1.1/../../../../include/c++/12.1.1/x86_64-pc-linux-gnu/bits/c++config.h:96:19: note: expanded from macro '_GLIBCXX_DEPRECATED_SUGGEST' __attribute__ ((__deprecated__ ("use '" ALT "' instead"))) ^ It complains about the use of std::result_of, which is deprecated in C++17 and removed in C++20: https://en.cppreference.com/w/cpp/types/result_of Given we'll have to transition to std::invoke_result eventually, make a GDB wrapper to mimimc std::invoke_result, which uses std::invoke_result for C++ >= 17 and std::result_of otherwise. This way, it will be easy to remove the wrapper in the future, just replace gdb:: with std::. Tested by building with gcc 12 in -std=c++11 and -std=c++17 mode, and clang in -std=c++17 mode (I did not test fully with clang in -std=c++11 mode because there are other unrelated issues). Change-Id: I50debde0a3307a7bc67fcf8fceefda51860efc1d 2022-08-30 Tom Tromey Fix flush for sys.stderr GDB overwrites Python's sys.stdout and sys.stderr, but does not properly implement the 'flush' method -- it only ever will flush stdout. This patch fixes the bug. I couldn't find a straightforward way to write a test for this. Fix gdb.flush documentation The gdb.flush documentation does not mention the 'stream' argument in the function signature, only in the description. This patch fixes the oversight. 2022-08-30 Nick Clifton BFD library: Use entry 0 in directory and filename tables of DWARF-5 debug info. PR 29529 * dwarf2.c (struct line_info_table): Add new field: use_dir_and_file_0. (concat_filename): Use new field to help select the correct table slot. (read_formatted_entries): Do not skip entry 0. (decode_line_info): Set new field depending upon the version of DWARF being parsed. Initialise filename based upon the setting of the new field. 2022-08-30 Enze Li gdb: update ranged_breakpoint::print_one_detail in comments The print_one_detail_ranged_breakpoint has been renamed to ranged_breakpoint::print_one_detail in this commit: commit ec45bb676c9c69c30783bcf35ffdac8280f3b8bc Date: Sat Jan 15 16:34:51 2022 -0700 Convert ranged breakpoints to vtable ops So their comments should be updated as well. 2022-08-30 Nick Clifton Add a testcase for PR 29494. PR 29494 * testsuite/gas/arm/pr29494.s: New test source file. * testsuite/gas/arm/pr29494.d: New test driver. 2022-08-30 liuzhensong LoongArch: Fix redefinition of "PACKAGE". Running configure and make in binutils-gdb. $ ./configure $ make In file included from ./as.h:37, from ./config/loongarch-lex.l:21, from config/loongarch-lex-wrapper.c:20: ./config.h:206: error: “PACKAGE” redefined [-Werror] #define PACKAGE "gas" ... gas/config * loongarch-lex-wrapper.c 2022-08-30 Tsukasa OI RISC-V: Add 'Zmmul' extension in assembler. Three-part patch set from Tsukasa OI to support zmmul in assembler. The 'Zmmul' is a RISC-V extension consisting of only multiply instructions (a subset of 'M' which has multiply and divide instructions). bfd/ * elfxx-riscv.c (riscv_implicit_subsets): Add 'Zmmul' implied by 'M'. (riscv_supported_std_z_ext): Add 'Zmmul' extension. (riscv_multi_subset_supports): Add handling for new instruction class. gas/ * testsuite/gas/riscv/attribute-09.d: Updated implicit 'Zmmul' by 'M'. * testsuite/gas/riscv/option-arch-02.d: Likewise. * testsuite/gas/riscv/m-ext.s: New test. * testsuite/gas/riscv/m-ext-32.d: New test (RV32). * testsuite/gas/riscv/m-ext-64.d: New test (RV64). * testsuite/gas/riscv/zmmul-32.d: New expected output. * testsuite/gas/riscv/zmmul-64.d: Likewise. * testsuite/gas/riscv/m-ext-fail-xlen-32.d: New test (failure by using RV64-only instructions in RV32). * testsuite/gas/riscv/m-ext-fail-xlen-32.l: Likewise. * testsuite/gas/riscv/m-ext-fail-zmmul-32.d: New failure test (RV32 + Zmmul but with no M). * testsuite/gas/riscv/m-ext-fail-zmmul-32.l: Likewise. * testsuite/gas/riscv/m-ext-fail-zmmul-64.d: New failure test (RV64 + Zmmul but with no M). * testsuite/gas/riscv/m-ext-fail-zmmul-64.l: Likewise. * testsuite/gas/riscv/m-ext-fail-noarch-64.d: New failure test (no Zmmul or M). * testsuite/gas/riscv/m-ext-fail-noarch-64.l: Likewise. include/ * opcode/riscv.h (enum riscv_insn_class): Added INSN_CLASS_ZMMUL. ld/ * testsuite/ld-riscv-elf/attr-merge-arch-01.d: We don't care zmmul in these testcases, so just replaced m by a. * testsuite/ld-riscv-elf/attr-merge-arch-01a.s: Likewise. * testsuite/ld-riscv-elf/attr-merge-arch-01b.s: Likewise. * testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-arch-02a.s: Likewise. * testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-arch-03a.s: Likewise. * testsuite/ld-riscv-elf/attr-merge-user-ext-01.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-user-ext-rv32i2p1_a2p0.s: Renamed. * testsuite/ld-riscv-elf/attr-merge-user-ext-rv32i2p1_a2p1.s: Renamed. opcodes/ * riscv-opc.c (riscv_opcodes): Updated multiply instructions to zmmul. 2022-08-30 Tom de Vries [gdb/symtab] Fix assert in set_length When running the included test-case, we run into: ... (gdb) break _start^M read.h:309: internal-error: set_length: \ Assertion `m_length == length' failed.^M ... The problem is that while there are two CUs: ... $ readelf -wi debug-names-missing-cu | grep @ Compilation Unit @ offset 0x0: Compilation Unit @ offset 0x2d: ... the CU table in the .debug_names section only contains the first one: ... CU table: [ 0] 0x0 ... The incomplete CU table makes create_cus_from_debug_names_list set the size of the CU at 0x0 to the actual size of both CUs combined. This eventually leads to the assert, when we read the actual size from the CU header. While having an incomplete CU table in a .debug_names section is incorrect, we need a better failure mode than asserting. The easiest way to fix this is to set the length to 0 (meaning: unkown) in create_cus_from_debug_names_list. This makes the failure mode to accept the incomplete CU table, but to ignore the missing CU. It would be nice to instead reject the .debug_names index, and build a complete CU list, but the point where we find this out is well after dwarf2_initialize_objfile, so it looks rather intrusive to restart at that point. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29453 2022-08-30 Tom de Vries [gdb/tdep] Declare score-*-* target obsolete I tried out the script gdb/gdb_mbuild.sh, and ran into: ... score-elf ... ... configure --target=score-elf ... make score-elf ... run score-elf score-elf: gdb dumped core Terminated ... Gdb runs into this internal error in initialize_current_architecture: ... if (! gdbarch_update_p (info)) internal_error (__FILE__, __LINE__, _("initialize_current_architecture: Selection of " "initial architecture failed")); ... The call to gdbarch_update_p fails because commit 575b4c298a6 ("gdb: Remove support for S+core") removed support for the architecture. Fix this by adding score-*-* to the list of obsolete targets in gdb/configure.tgt, such that we're no longer able to build the configuration: ... *** Configuration score-unknown-elf is obsolete. *** Support has been REMOVED. make: *** [Makefile:12806: configure-gdb] Error 1 ... Also remove the related line from the "Target Instruction Set Architectures" list in gdb/MAINTAINERS, such that gdb/gdb_mbuild.sh no longer tries to build it. 2022-08-30 GDB Administrator Automatic date update in version.in 2022-08-29 GDB Administrator Automatic date update in version.in 2022-08-28 Alan Modra PR29494 Trailing jump table on ARM out_inc_line_addr and relax_inc_line_addr are passed INT_MAX as line_delta to flag end of section. This filters its way down to size_inc_line_addr and emit_inc_line_addr. Pass line_delta on to scale_addr_delta where it can be used to omit an unaligned opcode error. PR 29494 * dwarf2dbg.c (scale_addr_delta): Delete unnecessary forward decl. Add line_delta param. Don't print error at end of section, just round the address down. (size_inc_line_addr, emit_inc_line_addr): Adjust calls. 2022-08-28 GDB Administrator Automatic date update in version.in 2022-08-27 rupothar bfd: Fix minor bug in read_indexed_address function. read_indexed_address function is using offset_size instead of addr_size while reading addrx forms. 2022-08-27 GDB Administrator Automatic date update in version.in 2022-08-26 Simon Marchi gdbsupport: fix gdb::optional compilation with C++11 && _GLIBCXX_DEBUG Similar to 911438f9f4 ("gdbsupport: fix array-view compilation with c++11 && _GLIBCXX_DEBUG"), but for gdb::optional. I get this error when building with Clang 14 and -std=c++11: CXX agent.o In file included from /home/simark/src/binutils-gdb/gdbsupport/agent.cc:20: In file included from /home/simark/src/binutils-gdb/gdbsupport/common-defs.h:210: In file included from /home/simark/src/binutils-gdb/gdbsupport/common-debug.h:23: /home/simark/src/binutils-gdb/gdbsupport/../gdbsupport/gdb_optional.h:213:5: error: use of this statement in a constexpr function is a C++14 extension [-Werror,-Wc++14-extensions] gdb_assert (this->has_value ()); ^ /home/simark/src/binutils-gdb/gdbsupport/gdb_assert.h:35:3: note: expanded from macro 'gdb_assert' ((void) ((expr) ? 0 : \ ^ Change-Id: If0cf55607fc9dbd1925ccb97cd9abbf8993ff264 2022-08-26 Simon Marchi gdb: change bpstat_print's kind parameter to target_waitkind Change from int to target_waitkind, which is really what is is. While at it, remove some outdated doc. The return value is described by a relatively self-describing enum, not a numerical value like the doc says. Change-Id: Id899c853a857c7891c45e5b1639024067d5b59cd 2022-08-26 Simon Marchi gdb, gdbsupport: configure: factor out yes/no/auto value checking Factor out the code that checks that a value is yes/no or yes/no/auto. Add two macros to gdbsupport/common.m4 and use them in gdb/configure.ac I inspected the changes to configure. Other than whitespace changes, we have some benign changes to the error messages (one of them had an error actually). There are changes to the --enable-source-highlight and --enable-libbacktrace handling, but setting enable_source_highlight / enable_libbacktrace was not really useful anyway, they already had the right value. Change-Id: I92587aec36874309e1605e2d60244649f09a757a 2022-08-26 Alan Modra PR12265, Compiling ld/ fails on Solaris 8 The fail was due to -Werror and headers included by dlfcn.h and elf-bfd.h disagreeing about AT_DCACHEBSIZE and other AT_*. Not a serious problem obviously, since release versions of binutils don't enable -Werror and the defines are not used. Anyway, reduce the number of files that might hit this problem by only including dlfcn.h where it is needed. PR 12265 * sysdep.h: Don't include dlfcn.h here. * plugin.c: Include it here. 2022-08-26 GDB Administrator Automatic date update in version.in 2022-08-25 Philippe Waroquiers Allow to document user-defined aliases. Compared to the previous version, this version fixes the comments reported by Tom Tromey and ensures that the 'help some-user-documented-alias' shows the alias definition to ensure the user understands this is an alias even if specifically documented. When using 'help ALIASNAME', GDB shows the help of the aliased command. This is a good default behaviour. However, GDB alias command allows to define aliases with arguments possibly changing or tuning significantly the behaviour of the aliased command. In such a case, showing the help of the aliased command might not be ideal. This is particularly true when defining an alias as a set of nested 'with' followed by a last command to launch, such as: (gdb) alias pp10 = with print pretty -- with print elements 10 -- print Asking 'help pp10' shows the help of the 'with' command, which is not particularly useful: (gdb) help pp10 with, pp10, w alias pp10 = with print pretty -- with print elements 10 -- print Temporarily set SETTING to VALUE, run COMMAND, and restore SETTING. Usage: with SETTING [VALUE] [-- COMMAND] .... Such an alias can now be documented by the user: (gdb) document pp10 >Pretty printing an expressiong, printing 10 elements. >Usage: pp10 [PRINT-COMMAND-OPTIONS] EXP >See 'help print' for more information. >end (gdb) help pp10 alias pp10 = with print pretty -- with print elements 10 -- print Pretty printing an expressiong, printing 10 elements. Usage: pp10 [PRINT-COMMAND-OPTIONS] EXP See 'help print' for more information. (gdb) When a user-defined alias is documented specifically, help and apropos use the provided alias documentation instead of the documentation of the aliased command. Such a documented alias is also not shown anymore in the help of the aliased command, and the alias is not listed anymore in the help of the aliased command. In particular for cases such as pp10 example above, indicating that pp10 is an alias of the 'with' command is confusing. 2022-08-25 Jan-Benedict Glaw sim/aarch64: Fix aarch64_get_CPSR_bits() declaration Noticed while doing mass builds with a very recent GCC: /usr/lib/gcc-snapshot/bin/gcc -DHAVE_CONFIG_H -DWITH_HW=1 -DHAVE_DV_SOCKSER -DDEFAULT_INLINE=0 -Wall -Wdeclaration-after-statement -Wpointer-arith -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wunused-but-set-parameter -Wno-error=maybe-uninitialized -Wmissing-declarations -Wmissing-prototypes -Wdeclaration-after-statement -Wmissing-parameter-type -Wpointer-sign -Wold-style-declaration -Werror -I. -I/var/lib/laminar/run/gdb-aarch64-elf/1/binutils-gdb/sim/aarch64 -I../common -I/var/lib/laminar/run/gdb-aarch64-elf/1/binutils-gdb/sim/aarch64/../common -I../../include -I/var/lib/laminar/run/gdb-aarch64-elf/1/binutils-gdb/sim/aarch64/../../include -I../../bfd -I/var/lib/laminar/run/gdb-aarch64-elf/1/binutils-gdb/sim/aarch64/../../bfd -I../../opcodes -I/var/lib/laminar/run/gdb-aarch64-elf/1/binutils-gdb/sim/aarch64/../../opcodes -I../.. -I/var/lib/laminar/run/gdb-aarch64-elf/1/binutils-gdb/sim/aarch64/../../gnulib/import -I../../gnulib/import -g -O2 -c -o cpustate.o -MT cpustate.o -MMD -MP -MF .deps/cpustate.Tpo cpustate.c cpustate.c:270:1: error: conflicting types for 'aarch64_get_CPSR_bits' due to enum/integer mismatch; have 'uint32_t(sim_cpu *, FlagMask)' {aka 'unsigned int(struct _sim_cpu *, FlagMask)'} [-Werror=enum-int-mismatch] 270 | aarch64_get_CPSR_bits (sim_cpu *cpu, FlagMask mask) | ^~~~~~~~~~~~~~~~~~~~~ In file included from sim-main.h:30, from cpustate.c:28: cpustate.h:310:20: note: previous declaration of 'aarch64_get_CPSR_bits' with type 'uint32_t(sim_cpu *, uint32_t)' {aka 'unsigned int(struct _sim_cpu *, unsigned int)'} 310 | extern uint32_t aarch64_get_CPSR_bits (sim_cpu *, uint32_t); | ^~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors 2022-08-25 H.J. Lu x86: Ignore protected visibility in shared libraries on Solaris On x86, the PLT entry in executable may be used as function address for functions in shared libraries. If functions are protected, the function address used in executable can be different from the function address used in shared library. This will lead to incorrect run-time behavior if function pointer equality is needed. By default, x86 linker issues an error in this case. On Solaris, linker issued an error for struct tm *tb = (kind == CPP_time_kind::FIXED ? gmtime : localtime) (&tt); where gmtime is a protected function in libc.so. Use gmtime's PLT entry in executable as function address is safe since function pointer equality isn't needed. Ignore protected visibility in shared libraries on Solaris to disable linker error. If function pointer equality is needed, linker will silently generate executable with incorrect run-time behavior on Solaris. PR ld/29512 * elf32-i386.c (elf_i386_scan_relocs): Ignore protected visibility in shared libraries on Solaris. * elf64-x86-64.c (elf_x86_64_scan_relocs): Likewise. 2022-08-25 Nick Clifton GAS: Add a return type tag to DWARF DIEs generated for function symbols. PR 29517 * dwarf2dbg.c (GAS_ABBREV_COMP_UNIT): New defined constant. (GAS_ABBREV_SUBPROG): New defined constant. (GAS_ABBREV_NO_TYPE): New defined constant. (out_debug_abbrev): Use the new defined constants when emitting abbreviation numbers. Generate an abbreviation for an unspecified type. (out_debug_info): Use the new defined constants when referring to abbreviations. Generate a use of the no_type abbreviation. Reference the use when generating DIEs for functions. * testsuite/gas/elf/dwarf-3-func.d: Update to allow for newly extended output from the assembler. * testsuite/gas/elf/dwarf-5-func-global.d: Likewise. * testsuite/gas/elf/dwarf-5-func-local.d: Likewise. * testsuite/gas/elf/dwarf-5-func.d: Likewise. GAS: Allow AArch64 pseudo-ops to accept the command line separator character. PR 29519 * config/tc-aarch64.c (s_unreq): Use find_end_of_line(). (s_aarch64_cpu): Likewise. (s_aarch64_arch): Likewise. (s_aarch64_arch_extension): Likewise. * testsuite/gas/aarch64/pr29519.d: New test driver file. * testsuite/gas/aarch64/pr29519.s: New test source file. 2022-08-25 Palmer Dabbelt gas: NEWS: Add the RISC-V features for 2.39 gas: NEWS: Add the RISC-V features for 2.38 gas: NEWS: Add the RISC-V features for 2.37 gas: NEWS: Add the RISC-V features for 2.36 gas: NEWS: Add the RISC-V features for 2.35 gas: NEWS: Add the RISC-V features for 2.31 2022-08-25 Alan Modra PR11290, avr-ld "out of range error" is confusing Don't overload bfd_reloc_outofrange with what is really a domain error (target at odd address), or an overflow. PR 11290 * reloc.c (bfd_reloc_other): Correct comment. * elf32-avr.c (avr_final_link_relocate): Return bfd_reloc_other for unaligned reloc target values. Return bfd_reloc_overflow when stubs are too far away and when R_AVR_LDS_STS_16, R_AVR_PORT6, or R_AVR_PORT5 overflow. (elf32_avr_relocate_section): Report more descriptive relocation errors. * bfd-in2.h: Regenerate. 2022-08-25 Martin Storsjö ld: pe: Move the return type to a separate line from the function name This fixes the coding style of an old, preexisting function. 2022-08-25 Alan Modra PR10372, SH: ld test with sim/sh/run fails always PR 10372 * testsuite/ld-sh/start.s: Add _start sym. Use trapa 34. Create an alloc .stack section. 2022-08-25 Alan Modra Re: LoongArch: ld: Fix bug not generate plt when link a dso Fixes loongarch32-elf +FAIL: medium jirl plt * testsuite/ld-loongarch-elf/cmodel.exp: Don't run test when no shared library support. 2022-08-25 GDB Administrator Automatic date update in version.in 2022-08-24 Martin Storsjö ld: pe: Make archive member file extension comparisons case insensitive when cross compiling too On Windows, filename_cmp is case insensitive, but when cross compiling with libraries that may contain members with uppercase file names, we should keep those comparisons case insensitive when running the build tools on other OSes too. Also make the check for .def consistent with the other ones, fixing out of bounds reads if file names are shorter than 4 characters. 2022-08-24 Richard Earnshaw gas: arm: handle multiple .directives on a single line (PR29519) There's been a long-standing bug in the arm backend where target-specific directives did not correctly handle lines with multiple statements. This patch fixes the issue for all the cases I've been able to find. It does result in a slight change in behaviour when errors are encountered: where, previously, .cpu arm6 bar would result in the error "junk at end of line, first unrecognized character is `b'", we now get "unknown cpu `arm6 bar'", which I think is slightly more helpful anyway. Similar errors are generated for other directives. 2022-08-24 Andrew Burgess gdb: new 'maint print frame-id' command When debugging a certain class of GDB bug, I often end up wanting to know what GDB thinks the frame-id is in a particular frame. It's not too hard to pull this from some debug output, but I thought it might be nice if there was a maintenance command that could tell us. This commit adds 'maint print frame-id' which prints the frame-id of the currently selected frame. You can also pass a frame level number to find the frame-id for a specific frame. There's a new test too. 2022-08-24 liuzhensong LoongArch: ld: Fix bug not generate plt when link a dso Fix the bug that can not generate func@plt when linking a undefined function with cmodel=medium. Add testcase. bfd/ * elfnn-loongarch.c ld/testsuite/ld-loongarch-elf/ * cmodel-libjirl.dd * cmodel.exp * libjirl.s 2022-08-24 GDB Administrator Automatic date update in version.in 2022-08-23 Alan Modra SHT_RELR sh_link and sh_info I don't think it makes any sense for a SHT_RELR section to specify a symbol table with sh_link. SHT_RELR relocations don't use symbols. There is no real need to specify sh_info either, SHT_RELR is not for relocatable object files. Anyway, fuzzers of course don't restrict themselves to even half-sensible objects. So they found a hole in objcopy using a non-alloc SHT_RELR in an ET_EXEC. In that case BFD set up the SHT_RELR section as if it were a SHT_REL against the sh_info target section. When it came to reading in the target section relocs, the count was horribly wrong which caused a buffer overflow. * elf.c (bfd_section_from_shdr ): Always just make a normal section, don't treat it as a reloc section. 2022-08-23 Alan Modra Re: bfd_elf_set_group_contents assertion Further to commit 7744e3278b9f. * elf.c (bfd_elf_set_group_contents): Restrict loc in loop writing contents, and add another assertion. 2022-08-23 Nick Clifton Add an option to dlltool to allow the creation of deterministic libraries. PR 29489 * dlltool.c (deterministic): New variable. (gen_lib_file): If deterministic is true set the BFD_DETERMINISTIC_OUTPUT flag. (usage): Mention --deterministic-libraries and --non-deterministic-libraries. (long_options): Add new options. (main): Parse new options. * doc/binutils.texi: Document the new options. * NEWS: Mention the new feature. 2022-08-23 Nelson Chu binutils: Updated my email address. binutils/ * MAINTAINERS (RISC-V): Updated my email address. 2022-08-23 GDB Administrator Automatic date update in version.in 2022-08-22 Tom Tromey Implement target async for Windows This implements target async for Windows. The basic idea is to have the worker thread block in WaitForDebugEvent, then notify the event loop when an event is seen. In a few situations, this blocking behavior is undesirable, so the functions passed to do_synchronously are changed to return a boolean indicating which behavior is needed. 2022-08-22 Tom Tromey Move some Windows operations to worker thread On Windows, certain debugging APIs can only be called from the thread that started (or attached) to the inferior. Also, there is no way on Windows to wait for a debug event in addition to other events. Therefore, in order to implement target async for Windows, gdb will have to call some functions in a worker thread. This patch implements the worker thread and moves the necessary operations there. Target async isn't yet implemented, so this patch does not cause any visible changes. 2022-08-22 Tom Tromey Avoid crash with Ravenscar tasks When using Ravenscar, gdb can crash if the user sets a breakpoint very early in task startup. This happens because gdb thinks the runtime is initialized, but in practice the particular task isn't sufficiently initialized. This patch avoids the issue by turning an assertion into an early return. I tested this using the AdaCore internal test suite. I don't know how to test Ravenscar using the FSF test suite. 2022-08-22 Nick Clifton Fix compile time warning from Clang about error messages not being printed safely. Have readelf warn users if it is asked to decode a LLVM bitcode file or a golang object file. * readelf.c (check_magic_number): New function. Checks the magic bytes at the start of a file. If they are not the ELF format magic values, then attempts to generate a helpful error message. (process_file_header): Call check_magic_number. 2022-08-22 Frederic Cambus Add OpenBSD AArch64 Little Endian BFD support. * config.bfd (aarch64-*-openbsd*): Add target. 2022-08-22 tangxiaolin LoongArch: gas: add support using constant variable in instructions. Instructions that can load immediate support using constant variable like ".equ var, 123 li.w/d resgister, var". gas/ * config/loongarch-parse.y * config/tc-loongarch.c Add four testcases.One is a program using constant variable, one test using label is unsupported, and another two test almost instructions that can load immediate. gas/ * testsuite/gas/loongarch/li.d * testsuite/gas/loongarch/li.s * testsuite/gas/loongarch/imm_ins_label-fail.d * testsuite/gas/loongarch/imm_ins_label-fail.l * testsuite/gas/loongarch/imm_ins_label-fail.s * testsuite/gas/loongarch/imm_ins.d * testsuite/gas/loongarch/imm_ins.s * testsuite/gas/loongarch/imm_ins_32.d * testsuite/gas/loongarch/imm_ins_32.s 2022-08-22 GDB Administrator Automatic date update in version.in 2022-08-21 Tom Tromey Fix crash in gdbpy_parse_register_id I noticed that gdbpy_parse_register_id would assert if passed a Python object of a type it was not expecting. The included test case shows this crash. This patch fixes the problem and also changes gdbpy_parse_register_id to be more "Python-like" -- it always ensures the Python error is set when it fails, and the callers now simply propagate the existing exception. 2022-08-21 GDB Administrator Automatic date update in version.in 2022-08-20 Alan Modra symbols for bfd_simple_get_relocated_section_contents If symbols are provided by the caller of this function they are passed on to bfd_get_relocated_section_contents. No surprises there. It gets a little weird if they are not provided. In that case they are read from the bfd by _bfd_generic_link_add_symbols, and global symbols are added to the generic linker hash table. Global symbols are not added to the linker hash table if symbols *are* provided. Now the linker hash table symbols are not used by the generic bfd_get_relocated_section_conents, and also not by most target versions when called from bfd_simple_get_relocated_section_contents except for symbols like "_gp". So it mostly doesn't matter whether symbols are in the linker hash table, but it's odd that there is a difference. We could always add them, but I'm inclined to think that is unnecessary work so this patch always leaves them out. Also, symbols are canonicalized and written into a malloc'd buffer. The buffer isn't freed, see commit 8e16317ca5eb. I don't know whether that matters any more, but in any case I can't see why we need another copy of the symbols when _bfd_generic_link_read_symbols has already cached symbols. * simple.c (bfd_simple_get_relocated_section_contents): If not provided, read symbols via bfd_generic_link_read_symbols. Do not create another copy of symbols. Tidy failure exits. Minor tidy of bfd_get_relocated_section_contents and bfd_get_full_section_contents arguments. 2022-08-20 Alan Modra Re: Missing linking test case for pe dll using a def file Fixes this when cross-compiling from x86_64-linux x86_64-w64-mingw32 +FAIL: compiling shared lib fastcall/stdcall * testsuite/ld-pe/pe-run2-def.exp (test_direct2_link_dll_def): Use CC_FOR_TARGET and CFLAGS_FOR_TARGET rather than CC and CFLAGS. 2022-08-20 GDB Administrator Automatic date update in version.in 2022-08-19 Patrick Monnerat gdb_do_one_event: use integer test syntax Timeout is an int, not a bool. 2022-08-19 Tom Tromey Remove two initialization functions I noticed a couple of initialization functions that aren't really needed, and that currently require explicit calls in gdb_init. This patch removes these functions, simplifying gdb a little. Regression tested on x86-64 Fedora 34. 2022-08-19 Simon Marchi gdb/testsuite: re-compile entry-value-typedef .S files with -fPIE As Luis pointed out here [1], the AArch64 variant of the test doesn't work on systems that use PIE by default. For example, on this Debian 11: $ make check TESTS="gdb.dwarf2/entry-value-typedef.exp" gdb compile failed, /usr/bin/ld: /tmp/ccJE8ZSr.o: relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `_ZNSsD1Ev@@GLIBCXX_3.4' which may bind externally can not be used when making a shared object; recompile with -fPIC /usr/bin/ld: /tmp/ccJE8ZSr.o(.text+0x38): unresolvable R_AARCH64_ADR_PREL_PG_HI21 relocation against symbol `_ZNSsD1Ev@@GLIBCXX_3.4' This is because entry-value-typedef-aarch64.S was generated on an old system that does not generate position-independent code by default, but the system the test runs on tries to link the test executable as position-independent. Fix this by regenerating the same binary on the same system as the original one, but with -fPIE this time. Do the same for the amd64 binary, although this one was already position-independent so the generated code doesn't change. With this patch applied, the test passes on the Debian 11 AArch64 system. [1] https://sourceware.org/pipermail/gdb-patches/2022-August/191462.html Change-Id: I68d55adaa56a7a3eddb0c13980b1a98b791f8144 2022-08-19 Felix Willgerodt gdb, testsuite: Adapt gdb.base/callfuncs.exp for new clang warning. Clang 15.0.0 enabled the warning for deprecated non-prototype functions by default: https://reviews.llvm.org/D122895 Callfuncs.exp is impacted and won't run due to new warnings: callfuncs.c:339:5: warning: a function declaration without a prototype is deprecated in all versions of C and is not supported in C2x [-Wdeprecated-non-prototype] int t_float_values (float_arg1, float_arg2) This patch disables those warnings with -Wno-deprecated-non-prototype. Removing the test for deprecated syntax would also be an option. But I will leave that up for others to decide/implement. 2022-08-19 Felix Willgerodt gdb, testsuite: Enable testcases that suppress specific warnings, for icc/icx. To cite gdb.exp: Some C/C++ testcases unconditionally pass -Wno-foo as additional options to disable some warning. That is OK with GCC, because by design, GCC accepts any -Wno-foo option, even if it doesn't support -Wfoo. Clang however warns about unknown -Wno-foo by default, unless you pass -Wno-unknown-warning-option as well. We do that here, so that individual testcases don't have to worry about it. This patch adds the same option that already exists for clang for icx and adds the equivalent icc option. 2022-08-19 Tiezhu Yang gdb: LoongArch: Handle variadic arguments According to LoongArch ELF ABI specification [1], variadic arguments are passed in GARs in the same manner as named arguments. And after a variadic argument has been passed on the stack, all future arguments will also be passed on the stack, i.e., the last argument register may be left unused due to the aligned register pair rule. long double data tpye is passed in an aligned GAR pair, the first register in the pair is even-numbered. [1] https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html 2022-08-19 Alan Modra loongarch64_pei_vec garbage in objcopy'd relocs Like commit a9c09a3667cc, but for loongarch64. * coff-loongarch64.c (SWAP_IN_RELOC_OFFSET): Define. (SWAP_OUT_RELOC_OFFSET): Define. 2022-08-19 GDB Administrator Automatic date update in version.in 2022-08-18 Vladimir Mezentsev gprofng: fix bug 29479 Collection fails when built without java support gprofng/ChangeLog 2022-08-17 Vladimir Mezentsev PR gprofng/29479 * libcollector/collector.c: Add #if defined(GPROFNG_JAVA_PROFILING) for java specific code. * libcollector/unwind.c: Likewise. 2022-08-18 Simon Marchi gdb: call check_typedef at beginning of dwarf_expr_context::fetch_result Bug 29374 shows this crash: $ ./gdb -nx --data-directory=data-directory -q -batch -ex "catch throw" -ex r -ex bt a.out ... /home/simark/src/binutils-gdb/gdb/../gdbsupport/array-view.h:217: internal-error: copy: Assertion `dest.size () == src.size ()' failed. The backtrace is: #0 internal_error (file=0x5555606504c0 "/home/simark/src/binutils-gdb/gdb/../gdbsupport/array-view.h", line=217, fmt=0x55556064b700 "%s: Assertion `%s' failed.") at /home/simark/src/binutils-gdb/gdbsupport/errors.cc:51 #1 0x000055555d41c0bb in gdb::copy (src=..., dest=...) at /home/simark/src/binutils-gdb/gdb/../gdbsupport/array-view.h:217 #2 0x000055555deef28c in dwarf_expr_context::fetch_result (this=0x7fffffffb830, type=0x621007a86830, subobj_type=0x621007a86830, subobj_offset=0, as_lval=false) at /home/simark/src/binutils-gdb/gdb/dwarf2/expr.c:1040 #3 0x000055555def0015 in dwarf_expr_context::evaluate (this=0x7fffffffb830, addr=0x62f00004313e "0", len=1, as_lval=false, per_cu=0x60b000069550, frame=0x621007c9e910, addr_info=0x0, type=0x621007a86830, subobj_type=0x621007a86830, subobj_offset=0) at /home/simark/src/binutils-gdb/gdb/dwarf2/expr.c:1091 #4 0x000055555e084327 in dwarf2_evaluate_loc_desc_full (type=0x621007a86830, frame=0x621007c9e910, data=0x62f00004313e "0", size=1, per_cu=0x60b000069550, per_objfile=0x613000006080, subobj_type=0x621007a86830, subobj_byte_offset=0, as_lval=false) at /home/simark/src/binutils-gdb/gdb/dwarf2/loc.c:1485 #5 0x000055555e0849e2 in dwarf2_evaluate_loc_desc (type=0x621007a86830, frame=0x621007c9e910, data=0x62f00004313e "0", size=1, per_cu=0x60b000069550, per_objfile=0x613000006080, as_lval=false) at /home/simark/src/binutils-gdb/gdb/dwarf2/loc.c:1529 #6 0x000055555e0828c6 in dwarf_entry_parameter_to_value (parameter=0x621007a96e58, deref_size=0x0, type=0x621007a86830, caller_frame=0x621007c9e910, per_cu=0x60b000069550, per_objfile=0x613000006080) at /home/simark/src/binutils-gdb/gdb/dwarf2/loc.c:1235 #7 0x000055555e082f55 in value_of_dwarf_reg_entry (type=0x621007a86890, frame=0x621007acc510, kind=CALL_SITE_PARAMETER_DWARF_REG, kind_u=...) at /home/simark/src/binutils-gdb/gdb/dwarf2/loc.c:1332 #8 0x000055555e083449 in value_of_dwarf_block_entry (type=0x621007a86890, frame=0x621007acc510, block=0x61e000033568 "T\004\205\001\240\004\004\243\001T\237\004\240\004\261\004\001T\004\261\004\304\005\004\243\001T\237\004\304\005\310\005\001T\004\310\005\311\005\004\243\001T\237", block_len=1) at /home/simark/src/binutils-gdb/gdb/dwarf2/loc.c:1365 #9 0x000055555e094d40 in loclist_read_variable_at_entry (symbol=0x621007a99bd0, frame=0x621007acc510) at /home/simark/src/binutils-gdb/gdb/dwarf2/loc.c:3889 #10 0x000055555f5192e0 in read_frame_arg (fp_opts=..., sym=0x621007a99bd0, frame=0x621007acc510, argp=0x7fffffffbf20, entryargp=0x7fffffffbf60) at /home/simark/src/binutils-gdb/gdb/stack.c:559 #11 0x000055555f51c352 in print_frame_args (fp_opts=..., func=0x621007a99ad0, frame=0x621007acc510, num=-1, stream=0x6030000bad90) at /home/simark/src/binutils-gdb/gdb/stack.c:887 #12 0x000055555f521919 in print_frame (fp_opts=..., frame=0x621007acc510, print_level=1, print_what=LOCATION, print_args=1, sal=...) at /home/simark/src/binutils-gdb/gdb/stack.c:1390 #13 0x000055555f51f22e in print_frame_info (fp_opts=..., frame=0x621007acc510, print_level=1, print_what=LOCATION, print_args=1, set_current_sal=0) at /home/simark/src/binutils-gdb/gdb/stack.c:1116 #14 0x000055555f526c6d in backtrace_command_1 (fp_opts=..., bt_opts=..., count_exp=0x0, from_tty=0) at /home/simark/src/binutils-gdb/gdb/stack.c:2079 #15 0x000055555f527ae5 in backtrace_command (arg=0x0, from_tty=0) at /home/simark/src/binutils-gdb/gdb/stack.c:2198 The problem is that the type that gets passed down to dwarf_expr_context::fetch_result (the type of a variable of which we're trying to read the entry value) is a typedef whose size has never been computed yet (check_typedef has never been called on it). As we get in the DWARF_VALUE_STACK case (line 1028 of dwarf2/expr.c), the `len` variable is therefore set to 0, instead of the actual type length. We then call allocate_value on subobj_type, which does call check_typedef, so the length of the typedef gets filled in at that point. We end up passing to the copy function a source array view of length 0 and a target array view of length 4, and the assertion fails. Fix this by calling check_typedef on both type and subobj_type at the beginning of fetch_result. I tried writing a test for this using the DWARF assembler, but I haven't succeeded. It's possible that we need to get into this specific code path (value_of_dwarf_reg_entry and all) to manage to get to dwarf_expr_context::fetch_result with a typedef type that has never been resolved. In all my attempts, the typedef would always be resolved already, so the bug wouldn't show up. As a fallback, I made a gdb.dwarf2 test with compiler-generated .S files. I don't particularly like those, but I think it's better than no test. The .cpp source code is the smallest reproducer I am able to make from the reproducer given in the bug (thanks to Pedro for suggestions on how to minimize it further than I had). Since I tested on both amd64 and aarch64, I added versions of the test for these two architectures. Change-Id: I182733ad08e34df40d8bcc47af72c482fabf4900 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29374 2022-08-18 Luis Machado [aarch64] Remove handling of ADR/ADRP from prologue analyzer As reported by Tom in https://sourceware.org/pipermail/gdb-patches/2022-August/191357.html, the aarch64 prologue analyzer considers the adrp instruction in the gdb.dwarf2/dw2-dir-file-name.exp testcase to be part of a prologue. The function has no prologue though, and it only loads the volatile variable from memory. GDB should not skip any instructions in this case. Doing some archaeology, it seems handling for adr/adrp in prologues was included with the original aarch64 port. It might've been an oversight. In the particular case of gdb.dwarf2/dw2-dir-file-name.exp, the analyzer skips a couple instructions and leaves us in a nice spot where the address to the variable "v" is already in w0. But no prologues exists. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29481 2022-08-18 Tom Tromey Change bookmark allocation This changes how bookmarks are allocated and stored, replacing a linked list with a vector and removing some ALL_* iterator macros. Regression tested on x86-64 Fedora 34. 2022-08-18 Thiago Jung Bauermann Add test for AArch64 Scalable Vector Extension It exercises a bug that GDB previously had where it would lose track of some registers when the inferior changed its vector length. It also checks that the vg register and the size of the z0-z31 registers correctly reflect the new vector length. 2022-08-18 Thiago Jung Bauermann Fix thread's gdbarch when SVE vector length changes When the inferior program changes the SVE length, GDB can stop tracking some registers as it obtains the new gdbarch that corresponds to the updated length: Breakpoint 1, do_sve_ioctl_test () at sve-ioctls.c:44 44 res = prctl(PR_SVE_SET_VL, i, 0, 0, 0, 0); (gdb) print i $2 = 32 (gdb) info registers ⋮ [ snip registers x0 to x30 ] ⋮ sp 0xffffffffeff0 0xffffffffeff0 pc 0xaaaaaaaaa8ac 0xaaaaaaaaa8ac cpsr 0x60000000 [ EL=0 BTYPE=0 C Z ] fpsr 0x0 0 fpcr 0x0 0 vg 0x8 8 tpidr 0xfffff7fcb320 0xfffff7fcb320 (gdb) next 45 if (res < 0) { (gdb) info registers ⋮ [ snip registers x0 to x30 ] ⋮ sp 0xffffffffeff0 0xffffffffeff0 pc 0xaaaaaaaaa8cc 0xaaaaaaaaa8cc cpsr 0x200000 [ EL=0 BTYPE=0 SS ] fpsr 0x0 0 fpcr 0x0 0 vg 0x4 4 (gdb) Notice that register tpidr disappeared when vg (which holds the vector length) changed from 8 to 4. The tpidr register is provided by the org.gnu.gdb.aarch64.tls feature. This happens because the code that searches for a new gdbarch to match the new vector length in aarch64_linux_nat_target::thread_architecture doesn't take into account the features present in the target description associated with the previous gdbarch. This patch makes it do that. Since the id member of struct gdbarch_info is now unused, it's removed. 2022-08-18 Ralf Habacker Missing linking test case for pe dll using a def file. PR 28362 * testsuite/ld-pe/pe-run2-def.exp: New file. 2022-08-18 Patrick Monnerat gdbsupport/event-loop: add a timeout parameter to gdb_do_one_event Since commit b2d8657, having a per-interpreter event/command loop is not possible anymore. As Insight uses a GUI that has its own event loop, gdb and GUI event loops have then to be "merged" (i.e.: work together). But this is problematic as gdb_do_one_event is not aware of this alternate event loop and thus may wait forever. A solution is to delegate GUI events handling to the gdb events handler. Insight uses Tck/Tk as GUI and the latter offers a "notifier" feature to implement such a delegation. The Tcl notifier spec requires the event wait function to support a timeout parameter. Unfortunately gdb_do_one_event does not feature such a parameter. This timeout cannot be implemented externally with a gdb timer, because it would become an event by itself and thus can cause a legitimate event to be missed if the timeout is 0. Tcl implements "idle events" that are (internally) triggered only when no other event is pending. For this reason, it can call the event wait function with a 0 timeout quite often. This patch implements a wait timeout to gdb_do_one_event. The initial pending events monitoring is performed as before without the possibility to enter a wait state. If no pending event has been found during this phase, a timer is then created for the given timeout in order to re-use the implemented timeout logic and the event wait is then performed. This "internal" timer only limits the wait time and should never be triggered. It is deleted upon gdb_do_one_event exit. The new parameter defaults to "no timeout" (-1): as it is used by Insight only, there is no need to update calls from the gdb source tree. 2022-08-18 Patrick Monnerat gdb: add Patrick Monnerat to gdb/MAINTAINERS 2022-08-18 Jan Beulich x86: move / quiesce pre-386 non-16-bit warning Emitting this warning for every insn, including ones having actual errors, is annoying. Introduce a boolean variable to emit the warning just once on the first insn after .arch may have changed the things, and move the warning to output_insn(). (I didn't want to go as far as checking whether the .arch actually turned off the i386 bit, but doing so would be an option.) x86: insert "no error" enumerator in i386_error enumeration The value of zero would better not indicate any error, but rather hit the abort() at the top of the consuming switch(). 2022-08-18 GDB Administrator Automatic date update in version.in 2022-08-17 Maciej W. Rozycki GDB/testsuite: Fix PARAM_ZUINTEGER reported for PARAM_ZUINTEGER_UNLIMITED Correctly report PARAM_ZUINTEGER_UNLIMITED rather than PARAM_ZUINTEGER in testing a Python parameter of the PARAM_ZUINTEGER_UNLIMITED type. 2022-08-17 Alan Modra bfd_elf_set_group_contents assertion objcopy of broken SHT_GROUP sections shouldn't write garbage. * elf.c (bfd_elf_set_group_contents): If number of entries is unexpected, fill out section with zeros. 2022-08-17 Alan Modra timeout in mmo_get_symbols Fix mmo_get_byte to return a fail-safe value, not just on the first call with a read error but on subsequent calls too. * mmo.c (mmo_get_byte): Return the fail-safe value on every call after a read error. 2022-08-17 Alan Modra mmo.c leak in mmo_make_section * mmo.c (mmo_make_section): Alloc name using bfd_alloc. Use bfd_error_no_memory. (mmo_decide_section): Check for NULL return from mmo_make_section. 2022-08-17 Alan Modra asan: heap buffer overflow in mmo_scan mmo_get_loc needs to handle arbitrary vma and size chunks. Fuzzers found that it wasn't working so well when the end of chunks were getting close to address wrap-around. * mmo.c (mmo_get_loc): Make "size" unsigned. Avoid arithmetic overflow when calculating whether range hits an existing chunk. 2022-08-17 Alan Modra elf.c tidy Swap params of is_note, so they are section, segment like others used in rewrite_elf_program_header. Whitespace fixes, plus wrapping of overlong lines. 2022-08-17 GDB Administrator Automatic date update in version.in 2022-08-16 Torbjörn SVENSSON bfd: Define ___lc_codepage_func prototype for older MinGW-w64 In commit 68e80d96a84282d547f3b3c1234c99009521630c, the usage of ___lc_codepage_func was introduced to determine the current encoding. Prior to version 9.0 of MinGW-w64, the function prototype for ___lc_codepage_func was missing and trying to build BFD caused the following error: error: implicit declaration of function ‘___lc_codepage_func’ This changeset adds a conditonal definition of ___lc_codepage_func to allow a sucessful build with MinGW-w64. 2022-08-16 H.J. Lu i386: Add MAX_OPERAND_BUFFER_SIZE When displaying operands, invalid opcodes may overflow operand buffer due to additional styling characters. Each style is encoded with 3 bytes. Define MAX_OPERAND_BUFFER_SIZE for operand buffer size and increase it from 100 bytes to 128 bytes to accommodate 9 sets of styles in an operand. gas/ PR binutils/29483 * testsuite/gas/i386/i386.exp: Run pr29483. * testsuite/gas/i386/pr29483.d: New file. * testsuite/gas/i386/pr29483.s: Likewise. opcodes/ PR binutils/29483 * i386-dis.c (MAX_OPERAND_BUFFER_SIZE): New. (obuf): Replace 100 with MAX_OPERAND_BUFFER_SIZE. (staging_area): Likewise. (op_out): Likewise. 2022-08-16 Andrew Burgess gdb/riscv: fix gdb.arch/riscv-unwind-long-insn.exp on RV64 I noticed that the gdb.arch/riscv-unwind-long-insn.exp test was failing when run on a 64-bit RISC-V target. The problem was that GDB was failing to stop after a finish command, and was then running to an unexpected location. The reason GDB failed to stop at the finish breakpoint was that the frame-id of the inferior, when we reached the finish breakpoint, didn't match the expected frame-id that was stored on the breakpoint. The reason for this mismatch was that the assembler code that is included in this test, was written only taking 32-bit RISC-V into account, as a result, the $fp register was being corrupted, and this was causing the frame-id mismatch. Specifically, the $fp register would end up being sign-extended from 32 to 64 bits. If the expected $fp value has some significant bits above bit 31 then the computed and expected frame-ids would not match. To fix this I propose merging the two .s files into a single .S file, and making use of preprocessor macros to specialise the file for the correct size of $fp. There are plenty of existing tests that already make use of preprocessor macros in assembler files, so I assume this approach is fine. Once I'd decided to make use of preprocessor macros to solve the 32/64 bit issue, then I figured I might as well merge the two test assembler files, they only differed by a single instruction. With this change in place I now see this test fully passing on 32 and 64 bit RISC-V targets. 2022-08-16 Simon Marchi gdb/testsuite: fix breakpoint script output in gdb.mi/mi-break.exp Commit 9db0d8536dbc ("gdb/mi: fix breakpoint script field output") fixed the output of the script key in the MI breakpoint output, from script={"print 10","continue"} to script=["print 10","continue"] However, it missed updating this test case, which still tests for the old (broken) form, causing: FAIL: gdb.mi/mi-break.exp: mi-mode=main: test_breakpoint_commands: breakpoint commands: check that commands are set (unexpected output) FAIL: gdb.mi/mi-break.exp: mi-mode=separate: test_breakpoint_commands: breakpoint commands: check that commands are set (unexpected output) Update the test to expect the new form. Change-Id: I174919d4eea53e96d914ca9bd1cf6f01c8de30b8 2022-08-16 Tom Tromey Use strwinerror in gdb/windows-nat.c When working on windows-nat.c, it's useful to see an error message in addition to the error number given by GetLastError. This patch moves strwinerror from gdbserver to gdbsupport, and then updates windows-nat.c to use it. A couple of minor changes to strwinerror (constify the return type and use the ARRAY_SIZE macro) are also included. 2022-08-16 Tom Tromey Remove register_gdbarch_init This removes the deprecated register_gdbarch_init in favor a default argument to gdbarch_register. Regression tested on x86-64 Fedora 34. 2022-08-16 Alan Modra PR29495, rewrite_elf_program_header looping This patch, in order of significance: 1) Replaces some macros with inline functions. 2) Those inline functions catch and avoid arithmetic overflows when comparing addresses. 3) When assigning sections to segments (IS_SECTION_IN_INPUT_SEGMENT) use bed->want_p_paddr_set_to_zero to decide whether lma vs p_paddr or vma vs p_vaddr should be tested. When remapping, use the same test, and use is_note rather than the more restrictive IS_COREFILE_NOTE. It's important that the later tests not be more restrictive. If they are it can lead to the situation triggered by the testcases, where a section seemingly didn't fit and thus needed a new mapping. It didn't fit the new mapping either, and this repeated until memory exhausted. PR 29495 * elf.c (SEGMENT_END, SECTION_SIZE, IS_CONTAINED_BY_VMA): Delete. (IS_CONTAINED_BY_LMA, IS_NOTE, IS_COREFILE_NOTE): Delete. (segment_size, segment_end, section_size): New inline function. (is_contained_by, is_note): Likewise. (rewrite_elf_program_header): Use new functions. 2022-08-16 Jan Beulich x86: shorten certain template names Now that we can purge templates, let's use this to improve readability a little by shortening a few of their names, making functionally similar ones also have identical names in their multiple incarnations. 2022-08-16 Jan Beulich x86: template-ize certain vector conversion insns Many of the vector conversion insns come with X/Y/Z suffixed forms, for disambiguation purposes in AT&T syntax. All of these gorups follow certain patterns. Introduce "xy" and "xyz" templates to reduce redundancy. To facilitate using a uniform name for both AVX and AVX512, further introduce a means to purge a previously defined template: A standalone will be recognized to have this effect. Note that in the course of the conversion VFPCLASSPH is properly split to separate AT&T and Intel syntax forms, matching VFPCLASSP{S,D} and yielding the intended "ambiguous operand size" diagnostic in Intel mode. 2022-08-16 Jan Beulich x86: template-ize vector packed byte/word integer insns Many of the vector integer insns come in byte/word element pairs. Most of these pairs follow certain encoding patterns. Introduce a "bw" template to reduce redundancy. Note that in the course of the conversion - the AVX VPEXTRW template which is not being touched needs to remain ahead of the new "combined" ones, as (a) this should be tried first when matching insns against templates and (b) its Load attributes requires it to be first, - this add a benign/meaningless IgnoreSize attribute to the memory form of PEXTRB; it didn't seem worth avoiding this. 2022-08-16 Jan Beulich x86: re-order AVX512 S/G templates The AVX2 gather ones are nicely grouped - do the same for the various AVX512 scatter/gather ones. On the moved lines also convert EVex= to EVex. 2022-08-16 Jan Beulich x86: template-ize vector packed dword/qword integer insns Many of the vector integer insns come in dword/qword element pairs. Most of these pairs follow certain encoding patterns. Introduce a "dq" template to reduce redundancy. Note that in the course of the conversion - a few otherwise untouched templates are moved, so they end up next to their siblings), - drop an unhelpful Cpu64 from the GPR form of VPBROADCASTQ, matching what we already have for KMOVQ - the diagnostic is better this way for insns with multiple forms (i.e. the same Cpu64 attributes on {,V}MOVQ, {,V}PEXTRQ, and {,V}PINSRQ are useful to keep), - this adds benign/meaningless IgnoreSize attributes to the GPR forms of KMOVD and VPBROADCASTD; it didn't seem worth avoiding this. 2022-08-16 Jan Beulich x86: template-ize packed/scalar vector floating point insns The vast majority of vector FP insns comes in single/double pairs. Many pairs follow certain encoding patterns. Introduce an "sd" template to reduce redundancy. Similarly, to further cover similarities between AVX512F and AVX512-FP16, introduce an "sdh" template. For element-size Disp8 shift generalize i386-gen's broadcast size determination, allowing Disp8MemShift to be specified without an operand in the affected templated templates. While doing the adjustment also eliminate an unhelpful (lost information) diagnostic combined with a use after free in what is now get_element_size(). Note that in the course of the conversion - the AVX512F form of VMOVUPD has a stray (leftover) Load attribute dropped, - VMOVSH has a benign IgnoreSize added (the attribute is still strictly necessary for VMOVSD, and necessary for VMOVSS as long as we permit strange combinations like "-march=i286+avx"), - VFPCLASSPH is properly split to separate AT&T and Intel syntax forms, matching VFPCLASSP{S,D}. 2022-08-16 Jan Beulich revert "x86: Also pass -P to $(CPP) when processing i386-opc.tbl" This reverts commit 384f368958f2a5bb083660e58e5f8a010e6ad429, which broke i386-gen's emitting of diagnostics. As a replacement to address the original issue of newer gcc no longer splicing lines when dropping the line continuation backslashes, switch to using + as the line continuation character, doing the line splicing in i386-gen. 2022-08-16 GDB Administrator Automatic date update in version.in 2022-08-15 Alan Modra PR29362, some binutils memory leaks 2022-08-16 Alan Modra Cunlong Li PR 29362 * dwarf.c (free_debug_information): New function, extracted.. (free_debug_memory): ..from here. (process_debug_info): Use it when before clearing out unit debug_information. Clear all fields. * objcopy.c (delete_symbol_htabs): New function. (main): Call it via xatexit. (copy_archive): Free "dir". * objdump.c (free_debug_section): Free reloc_info. 2022-08-15 Jiangshuai Li gdb/csky add unwinder for sigtramp frame when kernel 4.x and later When kernel veriosn >= V4.x, the characteristic values used to determine whether it is a signal function call are: movi r7, 139 trap 0 Registers are saved at (sp + CSKY_SIGINFO_OFFSET + CSKY_SIGINFO_SIZE + CSKY_UCONTEXT_SIGCONTEXT + CSKY_SIGCONTEXT_PT_REGS_TLS). The order is described in csky_linux_rt_sigreturn_init_pt_regs. 2022-08-15 Alan Modra aarch64_pei_vec I know this target is just a skeleton, but let's not write out relocs with uninitialised garbage. * coff-aarch64.c (SWAP_IN_RELOC_OFFSET): Define. (SWAP_OUT_RELOC_OFFSET): Define. 2022-08-15 GDB Administrator Automatic date update in version.in 2022-08-14 Andrew Burgess gdb/riscv: improve a comment about fcsr, fflags, and frm registers There's a comment in riscv-tdep.c that explains some of the background about how we check for the fcsr, fflags, and frm registers within a riscv target description. This comment (and the functionality it describes) relates to how QEMU advertises these registers within its target description. Unfortunately, QEMU includes these three registers in both the fpu and crs target description features. To work around this GDB uses one of the register declarations, and ignores the other, this means the GDB user sees a single copy of each register, and things just work. When I originally wrote the comment I thought it didn't matter which copy of the register GDB selected, the fpu copy or the csr copy, so long as we just used one of them. The comment reflected this belief. Upon further investigation, it turns out I was wrong. GDB has to use the csr copy of the register. If GDB tries to use the register from the fpu feature then QEMU will return an error when GDB tries to read or write the register. Luckily, the code within GDB (currently) will always select the csr copy of the register, so nothing is broken, but the comment is wrong. This commit updates the comment to better describe what is actually going on. Of course, I should probably also send a patch to QEMU to fix up the target description that is sent to GDB. 2022-08-14 Andrew Burgess gdb/nds32: update features/nds32.c After this commit: commit 7b7c365c5c663ffdfb2b3f696db35c23cdccd921 Date: Wed Sep 15 10:10:46 2021 +0200 [bfd] Ensure unique printable names for bfd archs The printable name field of the default nds32 bfd_arch_info changed from 'n1h' to 'n1'. As a consequence the generated feature file within GDB should have been recreated. Recreate it now. 2022-08-14 Tom Tromey Move decode_location_spec to code_breakpoint breakpoint::decode_location_spec just asserts if called. It turned out to be relatively easy to remove this method from breakpoint and instead move the base implementation to code_breakpoint. Change location_spec_to_sals to a method location_spec_to_sals is only ever called for code breakpoints, so make it a protected method there. Change breakpoint_re_set_default to a method breakpoint_re_set_default is only ever called from breakpoint re_set methods, so make it a protected method on code_breakpoint. 2022-08-14 GDB Administrator Automatic date update in version.in 2022-08-13 Alan Modra PR29482 - strip: heap-buffer-overflow PR 29482 * coffcode.h (coff_set_section_contents): Sanity check _LIB. asan: NULL dereference in spu_elf_object_p * elf32-spu.c (spu_elf_object_p): Don't dereference NULL shdr->bfd_section. ubsan: undefined shift in sign_extend * libhppa.h (sign_extend): Avoid undefined behaviour. asan: NULL dereference in som_set_reloc_info * som.c (som_set_reloc_info): Ignore non-existent previous fixup references. readelf: print 0x0 as 0, and remove trailing spaces This changes readelf output a little, removing the 0x prefix on hex output when the value is 0, except in cases where a fixed field width is shown. %#010x is not a good replacement for 0x%08x. Make dwarf_vma uint64_t This replaces dwarf_vma, dwarf_size_type and dwarf_signed_vma with uint64_t and int64_t everywhere. The patch also gets rid of DWARF_VMA_FMT since we can't use that with uint64_t, and all of the configure support for deciding the flavour of HOST_WIDEST_INT. dwarf_vmatoa also disappears, replacing most uses with one of PRIx64, PRId64 or PRIu64. Printing of size_t and ptrdiff_t values now use %z and %t rather than by casting to unsigned long. Also, most warning messages that used 0x%lx or similar now use %#lx and a few that didn't print the 0x hex prefix now also use %#. The patch doesn't change normal readelf output, except in odd cases where values previously might have been truncated. Don't use bfd_vma in readelf.c This replaces bfd_vma with uint64_t in readelf, defines BFD64 unconditionally, removes tests of BFD64 and sizeof (bfd_vma), and removes quite a few now unnecessary casts. Don't use bfd_size_type in readelf.c and dwarf.c Replacing bfd_size_type with dwarf_size_type or uint64_t is mostly cosmetic. The point of the change is to avoid use of a BFD type in readelf, where we'd like to keep as independent of BFD as possible. Also, the patch is a step towards using standard types. Replace elf_vma with uint64_t This patch replaces all uses of elf_vma with uint64_t, removes tests of sizeof (elf_vma), and does a little tidying of byte_get_little_endian and byte_get_big_endian. 2022-08-13 GDB Administrator Automatic date update in version.in 2022-08-12 Tom de Vries [gdb/testsuite] Fix gdb.dwarf2/dw2-dir-file-name.exp When running test-case gdb.dwarf2/dw2-dir-file-name.exp on x86_64-linux, we have: ... (gdb) break compdir_missing__ldir_missing__file_basename^M Breakpoint 2 at 0x4004c4: file tmp-dw2-dir-file-name.c, line 999.^M (gdb) continue^M Continuing.^M ^M Breakpoint 2, 0x00000000004004c4 in \ compdir_missing__ldir_missing__file_basename () \ at tmp-dw2-dir-file-name.c:999^M (gdb) PASS: gdb.dwarf2/dw2-dir-file-name.exp: \ compdir_missing__ldir_missing__file_basename: continue to breakpoint: \ compdir_missing__ldir_missing__file_basename ... When trying to set a breakpoint on compdir_missing__ldir_missing__file_basename, the architecture-specific prologue skipper starts at 0x4004c0 and skips past two insns, to 0x4004c4: ... 00000000004004c0 : 4004c0: 55 push %rbp 4004c1: 48 89 e5 mov %rsp,%rbp 4004c4: 8b 05 72 1b 20 00 mov 0x201b72(%rip),%eax # 60203c 4004ca: 83 c0 01 add $0x1,%eax 4004cd: 89 05 69 1b 20 00 mov %eax,0x201b69(%rip) # 60203c 4004d3: 90 nop 4004d4: 5d pop %rbp 4004d5: c3 ret ... And because the line table info is rudamentary: ... CU: tmp-dw2-dir-file-name.c: File name Line number Starting address View Stmt tmp-dw2-dir-file-name.c 999 0x4004c0 x tmp-dw2-dir-file-name.c 1000 0x4004d6 x tmp-dw2-dir-file-name.c - 0x4004d6 ... the address does not fall at an actual line, so the breakpoint is shown with address, both when setting it and hitting it. when running the test-case with aarch64-linux, we have similarly: ... (gdb) break compdir_missing__ldir_missing__file_basename^M Breakpoint 2 at 0x400618: file tmp-dw2-dir-file-name.c, line 999.^M ... due to the architecture-specific prologue skipper starting at 0x400610 and skipping past two insns, to 0x400618: ... 0000000000400610 : 400610: 90000100 adrp x0, 420000 <__libc_start_main@GLIBC_2.17> 400614: 9100b000 add x0, x0, #0x2c 400618: b9400000 ldr w0, [x0] 40061c: 11000401 add w1, w0, #0x1 400620: 90000100 adrp x0, 420000 <__libc_start_main@GLIBC_2.17> 400624: 9100b000 add x0, x0, #0x2c 400628: b9000001 str w1, [x0] 40062c: d503201f nop 400630: d65f03c0 ret ... But interestingly, the aarch64 architecture-specific prologue skipper is wrong. There is no prologue, and the breakpoint should be set at 0x400610. By using "break *compdir_missing__ldir_missing__file_basename" we can get the breakpoint set at 0x400610: ... (gdb) break *compdir_missing__ldir_missing__file_basename^M Breakpoint 2 at 0x400610: file tmp-dw2-dir-file-name.c, line 999.^M ... and make the test-case independent of prologue analysis. This requires us to update the expected patterns. The fix ensures that once the aarch64 architecture-specific prologue skipper will be fixed, this test-case won't start failing. Tested on x86_64-linux. 2022-08-12 GDB Administrator Automatic date update in version.in 2022-08-11 Lancelot SIX gdb/varobj: Only re-evaluate invalid globals during re_set When doing varobj_re_set, we currently try to recreate floating varobj. This was introduced by 4e969b4f0128 "Re-evaluate floating varobj as part of varobj_invalidate" to deal with use a after free issue. However since bc20e562ec0 "Fix use after free in varobj" we now ensure that we never have dangling pointers so this all recreation is not strictly needed anymore for floating varobjs. This commit proposes to remove this recreation process for floating varobjs. Tested on x86_64-linux. 2022-08-11 Tom de Vries Lancelot SIX gdb/varobj: Reset varobj after relocations have been computed [This patch is a followup to the discussion in https://sourceware.org/pipermail/gdb-patches/2022-August/191188.html] PR/29426 shows failures when running the gdb.mi/mi-var-invalidate-shlib test when using a compiler which does not produce a PIE executable by default. In the testcase, a varobj is created to track a global variable, and then the main binary is reloaded in GDB (using the file command). During the load of the new binary, GDB tries to recreate the varobj to track the global in the new binary (varobj_invalidate_iter). At this point, the old process is still in flight. So when we try to access to the value of the global, in a PIE executable we only have access to the unrelocated address (the objfile's text_section_offset () is 0). As a consequence down the line read_value_memory fails to read the unrelated address, so cannot evaluate the value of the global. Note that the expression used to access to the global’s value is valid, so the varobj can be created. When using a non PIE executable, the address of the global GDB knows about at this point does not need relocation, so read_value_memory can access the (old binary’s) value. So at this point, in the case of a non-PIE executable the value field is set, while it is cleared in the case of PIE executable. Later when the test issues a "-var-update global_var", the command sees no change in the case of the non-PIE executable, while in the case of the PIE executable install_new_value sees that value changes, leading to a different output. This patch makes sure that, as we do for breakpoints, we wait until relocation has happened before we try to recreate varobjs. This way we have a consistent behavior between PIE and non-PIE binaries. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29426 2022-08-11 Lancelot SIX gdb/varobj: Do not invalidate locals in varobj_invalidate_iter The varobj_invalidate_iter function has logic to invalidate any local varobj it can find. However since bc20e562ec0 "gdb/varobj: Fix use after free in varobj" all varobj containing references to an objfile are cleared when the objfile goes out of scope. This means that at this point any local varobj seen by varobj_invalidate_iter either has already been invalidated by varobj_invalidate_if_uses_objfile or only contains valid references and there is no reason to invalidate it. This patch proposes to remove this unnecessary invalidation and adds a testcase which exercises a scenario where a local varobj can legitimately survive a call to varobj_invalidate_iter. At this point the varobj_invalidate and varobj_invalidate_iter seem misnamed since they deal with re-creating invalid objects and do not do invalidation, but this will be fixed in a following patch. Tested on x86_64-linux. 2022-08-11 Dmitry Selyutin ppc/svp64: support svindex instruction https://libre-soc.org/openpower/sv/ https://libre-soc.org/openpower/sv/remap/#svindex https://libre-soc.org/openpower/isa/simplev/ ppc/svp64: support svremap instruction https://libre-soc.org/openpower/sv/ https://libre-soc.org/openpower/sv/remap/#svremap https://libre-soc.org/openpower/isa/simplev/ ppc/svp64: support svshape instruction https://libre-soc.org/openpower/sv/ https://libre-soc.org/openpower/sv/remap/#svshape https://libre-soc.org/openpower/isa/simplev/ ppc/svp64: support svstep instructions https://libre-soc.org/openpower/sv/ https://libre-soc.org/openpower/sv/svstep/ https://libre-soc.org/openpower/isa/simplev/ ppc/svp64: support setvl instructions https://libre-soc.org/openpower/sv/ https://libre-soc.org/openpower/sv/setvl/ https://libre-soc.org/openpower/isa/simplev/ ppc/svp64: introduce non-zero operand flag svstep and svshape instructions subtract 1 before encoding some of the operands. Obviously zero is not supported for these operands. Whilst PPC_OPERAND_PLUS1 fits perfectly to mark that maximal value should be incremented, there is no flag which marks the fact that zero values are not allowed. This patch adds a new flag, PPC_OPERAND_NONZERO, for this purpose. 2022-08-11 Dmitry Selyutin ppc/svp64: support LibreSOC architecture This patch adds support for LibreSOC machine and SVP64 extension flag for PowerPC architecture. SV (Simple-V) is a strict RISC-paradigm Scalable Vector Extension for the Power ISA. SVP64 is the 64-bit Prefixed instruction format implementing SV. Funded by NLnet through EU Grants No: 825310 and 825322, SV is in DRAFT form and is to be publicly submitted via the OpenPOWER Foundation ISA Working Group via the newly-created External RFC Process. For more details, visit https://libre-soc.org. 2022-08-11 Torbjörn SVENSSON [Arm] Cleanup arm_m_exception_cache With this change, only valid contents of LR are accepted when unwinding exception frames for m-profile targets. If the contents of LR are anything but EXC_RETURN or FNC_RETURN, it will cause GDB to print an error and/or abort unwinding of the frame as it's an invalid state for the unwinder. The FNC_RETURN pattern requires Security Extensions to be enabled. 2022-08-11 Fangrui Song RISC-V: Remove R_RISCV_GNU_VTINHERIT/R_RISCV_GNU_VTENTRY They were legacy relocation types copied from other ports. The related -fvtable-gc was removed from GCC in 2003. The associated assembler directives (.vtable_inherit and .vtable_entry) have never been supported by the RISC-V port. Remove related ld code. Link: https://github.com/riscv-non-isa/riscv-elf-psabi-doc/pull/323 2022-08-11 Alan Modra PR29466, APP/NO_APP with .linefile Commit 53f2b36a54b9 exposed a bug in sb_scrub_and_add_sb that could result in losing input. If scrubbing results in expansion past the holding capacity of do_scrub_chars output buffer, then do_scrub_chars stashes the extra input for the next call. That call never came because sb_scrub_and_add_sb wrongly decided it was done. Fix that by allowing sb_scrub_and_add_sb to see whether there is pending input. Also allow a little extra space so that in most cases we won't need to resize the output buffer. sb_scrub_and_add_sb also limited output to the size of the input, rather than the actual output buffer size. Fixing that resulted in a fail of gas/testsuite/macros/dot with an extra warning: "end of file not at end of a line; newline inserted". OK, so the macro in dot.s really does finish without end-of-line. Apparently the macro expansion code relied on do_scrub_chars returning early. So fix that too by adding a newline if needed in macro_expand_body. PR 29466 * app.c (do_scrub_pending): New function. * as.h: Declare it. * input-scrub.c (input_scrub_include_sb): Add extra space for two .linefile directives. * sb.c (sb_scrub_and_add_sb): Take into account pending input. Allow output to max. * macro.c (macro_expand_body): Add terminating newline. * testsuite/config/default.exp (SIZE, SIZEFLAGS): Define. * testsuite/gas/macros/app5.d, * testsuite/gas/macros/app5.s: New test. * testsuite/gas/macros/macros.exp: Run it. 2022-08-11 Alan Modra regen potfiles 2022-08-11 GDB Administrator Automatic date update in version.in 2022-08-10 Simon Marchi gdb/mi: fix breakpoint script field output The "script" field, output whenever information about a breakpoint with commands is output, uses wrong MI syntax. $ ./gdb -nx -q --data-directory=data-directory -x script -i mi =thread-group-added,id="i1" =breakpoint-created,bkpt={number="1",type="breakpoint",disp="keep",enabled="y",addr="0x000000000000111d",func="main",file="test.c",fullname="/home/simark/build/binutils-gdb-one-target/gdb/test.c",line="3",thread-groups=["i1"],times="0",original-location="main"} =breakpoint-modified,bkpt={number="1",type="breakpoint",disp="keep",enabled="y",addr="0x000000000000111d",func="main",file="test.c",fullname="/home/simark/build/binutils-gdb-one-target/gdb/test.c",line="3",thread-groups=["i1"],times="0",script={"aaa","bbb","ccc"},original-location="main"} (gdb) -break-info ^done,BreakpointTable={nr_rows="1",nr_cols="6",hdr=[{width="7",alignment="-1",col_name="number",colhdr="Num"},{width="14",alignment="-1",col_name="type",colhdr="Type"},{width="4",alignment="-1",col_name="disp",colhdr="Disp"},{width="3",alignment="-1",col_name="enabled",colhdr="Enb"},{width="18",alignment="-1",col_name="addr",colhdr="Address"},{width="40",alignment="2",col_name="what",colhdr="What"}],body=[bkpt={number="1",type="breakpoint",disp="keep",enabled="y",addr="0x000000000000111d",func="main",file="test.c",fullname="/home/simark/build/binutils-gdb-one-target/gdb/test.c",line="3",thread-groups=["i1"],times="0",script={"aaa","bbb","ccc"},original-location="main"}]} (gdb) In both the =breakpoint-modified and -break-info output, we have: script={"aaa","bbb","ccc"} According to the output syntax [1], curly braces means tuple, and a tuple contains key=value pairs. This looks like it should be a list, but uses curly braces by mistake. This would make more sense: script=["aaa","bbb","ccc"] Fix it, keeping the backwards compatibility by introducing a new MI version (MI4), in exactly the same way as was done when fixing multi-locations breakpoint output in [2]. - Add a fix_breakpoint_script_output uiout flag. MI uiouts will use this flag if the version is >= 4. - Add a fix_breakpoint_script_output_globally variable and the -fix-breakpoint-script-output MI command to set it, if frontends want to use the fixed output for this without using the newer MI version. - When emitting the script field, use list instead of tuple, if we want the fixed output (depending on the two criteria above) - [1] https://sourceware.org/gdb/onlinedocs/gdb/GDB_002fMI-Output-Syntax.html#GDB_002fMI-Output-Syntax [2] https://gitlab.com/gnutools/binutils-gdb/-/commit/b4be1b0648608a2578bbed39841c8ee411773edd Change-Id: I7113c6892832c8d6805badb06ce42496677e2242 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=24285 2022-08-10 Andrew Burgess objdump: fix extended (256) disassembler colors After commit: commit a88c79b77036e4778e70d62081c3cfd1044bb8e3 Date: Tue Aug 9 14:57:48 2022 +0100 Default to enabling colored disassembly if output is to a terminal. The 256 extended-color support for --disassembler-color was broken. This is fixed in this commit. PR 29457 * objdump (objdump_styled_sprintf): Check disassembler_color against an enum value, don't treat it as a bool. 2022-08-10 mga-sc gdb/riscv: implement cannot_store_register gdbarch method The x0 (zero) register is read-only on RISC-V. Implement the cannot_store_register gdbarch method to tell GDB this. Without this method GDB will try to write to x0, and relies on the target to ignore such writes. If you are using a target that complains (or throws an error) when writing to x0, this change will prevent this from happening. The gdb.arch/riscv-reg-aliases.exp test exercises writing to x0, and will show the errors when using a suitable target. 2022-08-10 Luis Machado Disable year 2038 support on 32-bit hosts by default With a recent import of gnulib, code has been pulled that tests and enables 64-bit time_t by default on 32-bit hosts that support it. Although gdb can use the gnulib support, bfd doesn't use gnulib and currently doesn't do these checks. As a consequence, if we have a 32-bit host that supports 64-bit time_t, we'll have a mismatch between gdb's notion of time_t and bfd's notion of time_t. This will lead to mismatches in the struct stat size, leading to memory corruption and crashes. This patch disables the year 2038 check for now, which makes things work reliably again. I'd consider this a temporary fix until we have proper bfd checks for the year 2038, if it makes sense. 64-bit hosts seems to be more common these days, so I'm not sure how important it is to have this support enabled and how soon we want to enable it. Thoughts? 2022-08-10 Jan Beulich gas/Dwarf: properly skip zero-size functions PR gas/29451 While out_debug_abbrev() properly skips such functions, out_debug_info() mistakenly didn't. It needs to calculate the high_pc expression ahead of time, in order to skip emitting any data for the function if the value is zero. The one case which would still leave a zero-size entry is when symbol_get_obj(symp)->size ends up evaluating to zero. I hope we can expect that to not be the case, otherwise we'd need to have a way to post-process .debug_info contents between resolving expressions and actually writing the data out to the file. Even then it wouldn't be entirely obvious in which way to alter the data. 2022-08-10 Alan Modra PR29462, internal error in relocate, at powerpc.cc:10796 Prior to the inline plt call support (commit 08be322439), the only local syms with plt entries were local ifunc symbols. There shouldn't be stubs for other local symbols so don't look for them. The patch also fixes minor bugs in get_reference_flags; Many relocs are valid only for ppc64 and a couple only for ppc32. PR 29462 * powerpc.cc (Target_powerpc::Relocate::relocate): Rename use_plt_offset to pltcal_to_direct, invert logic. For relocs not used with inline plt sequences against local symbols, only look for stubs when the symbol is an ifunc. (Target_powerpc::Scan::get_reference_flags): Correct reloc handling for relocs not valid for both 32-bit and 64-bit. 2022-08-10 Youling Tang bfd: Add support for LoongArch64 EFI (efi-*-loongarch64). This adds support for efi-loongarch64 by virtue of adding a new PEI target pei-loongarch64. This is not a full target and only exists to support EFI at this time. This means that this target does not support relocation processing and is mostly a container format. This format has been added to elf based loongarch64 targets such that efi images can be made natively on Linux. However this target is not valid for use with gas but only with objcopy. We should't limit addresses to 32-bits for 64-bit vma, otherwise there will be "RVA truncated" error when using objcopy on loongarch64. With these changes the resulting file is recognized as an efi image. Any magic number is based on the Microsoft PE specification [1]. The test results are as follows: $ make check-binutils RUNTESTFLAGS='loongarch64.exp' PASS: Check if efi app format is recognized $ objdump -h -f tmpdir/loongarch64copy.o tmpdir/loongarch64copy.o: file format pei-loongarch64 architecture: Loongarch64, flags 0x00000132: EXEC_P, HAS_SYMS, HAS_LOCALS, D_PAGED start address 0x0000000000000000 Sections: Idx Name Size VMA LMA File off Algn 0 .text 0000003c 00000000200000b0 00000000200000b0 00000200 2**2 CONTENTS, ALLOC, LOAD, READONLY, CODE [1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format bfd: * .gitignore (pe-loongarch64igen.c): New. * Makefile.am (pei-loongarch64.lo, pe-loongarch64igen.lo, pei-loongarch64.c, pe-loongarch64igen.c): Add support. * Makefile.in: Likewise. * bfd.c (bfd_get_sign_extend_vma): Add pei-loongarch64. * coff-loongarch64.c: New file. * coffcode.h (coff_set_arch_mach_hook, coff_set_flags, coff_write_object_contents) Add loongarch64 (loongarch64_pei_vec) support. * config.bfd: Likewise. * configure: Likewise. * configure.ac: Likewise. * libpei.h (GET_OPTHDR_IMAGE_BASE, PUT_OPTHDR_IMAGE_BASE, GET_OPTHDR_SIZE_OF_STACK_RESERVE, PUT_OPTHDR_SIZE_OF_STACK_RESERVE, GET_OPTHDR_SIZE_OF_STACK_COMMIT, PUT_OPTHDR_SIZE_OF_STACK_COMMIT, GET_OPTHDR_SIZE_OF_HEAP_RESERVE, PUT_OPTHDR_SIZE_OF_HEAP_RESERVE, GET_OPTHDR_SIZE_OF_HEAP_COMMIT, PUT_OPTHDR_SIZE_OF_HEAP_COMMIT, GET_PDATA_ENTRY, _bfd_peLoongArch64_bfd_copy_private_bfd_data_common, _bfd_peLoongArch64_bfd_copy_private_section_data, _bfd_peLoongArch64_get_symbol_info, _bfd_peLoongArch64_only_swap_filehdr_out, _bfd_peLoongArch64_print_private_bfd_data_common, _bfd_peLoongArch64i_final_link_postscript, _bfd_peLoongArch64i_only_swap_filehdr_out, _bfd_peLoongArch64i_swap_aouthdr_in, _bfd_peLoongArch64i_swap_aouthdr_out, _bfd_peLoongArch64i_swap_aux_in, _bfd_peLoongArch64i_swap_aux_out, _bfd_peLoongArch64i_swap_lineno_in, _bfd_peLoongArch64i_swap_lineno_out, _bfd_peLoongArch64i_swap_scnhdr_out, _bfd_peLoongArch64i_swap_sym_in, _bfd_peLoongArch64i_swap_sym_out, _bfd_peLoongArch64i_swap_debugdir_in, _bfd_peLoongArch64i_swap_debugdir_out, _bfd_peLoongArch64i_write_codeview_record, _bfd_peLoongArch64i_slurp_codeview_record, _bfd_peLoongArch64_print_ce_compressed_pdata): New. * peXXigen.c (_bfd_XXi_swap_aouthdr_in, _bfd_XXi_swap_aouthdr_out, _bfd_XXi_swap_scnhdr_out, pe_print_pdata, _bfd_XX_print_private_bfd_data_common, _bfd_XX_bfd_copy_private_section_data, _bfd_XXi_final_link_postscript): Support COFF_WITH_peLoongArch64, * pei-loongarch64.c: New file. * peicode.h (coff_swap_scnhdr_in, pe_ILF_build_a_bfd, pe_ILF_object_p): Support COFF_WITH_peLoongArch64. (jtab): Add dummy entry that traps. * targets.c (loongarch64_pei_vec): New. binutils * testsuite/binutils-all/loongarch64/loongarch64.exp: New file. * testsuite/binutils-all/loongarch64/pei-loongarch64.d: New test. * testsuite/binutils-all/loongarch64/pei-loongarch64.s: New test. include * coff/loongarch64.h: New file. * coff/pe.h (IMAGE_FILE_MACHINE_LOONGARCH64): New. 2022-08-10 GDB Administrator Automatic date update in version.in 2022-08-09 Andrew Burgess gdb/riscv/testsuite: fix failures in gdb.arch/riscv-reg-aliases.exp When running on a native RISC-V Linux target I currently see failures in the gdb.arch/riscv-reg-aliases.exp test like this: set $ft0.float = 501 (gdb) PASS: gdb.arch/riscv-reg-aliases.exp: write non-zero value to ft0 p/d $ft0.float $263 = 1140490240 (gdb) FAIL: gdb.arch/riscv-reg-aliases.exp: read ft0 after non-zero write to ft0 This test started failing after this commit: commit 56262a931b7ca8ee3ec9104bc7e9e0b40cf3d64e Date: Thu Feb 17 13:43:59 2022 -0700 Change how "print/x" displays floating-point value The problem is that when 501 is written to $ft0.float the value is converted to floating point format and stored in the register. Prior to the above commit printing with /x and /d would first extract the value as a float, and then convert the value to an integer for display. After the above commit GDB now uses the raw register value when displaying /x and /d, and so we see this behaviour: (gdb) info registers $ft0 ft0 {float = 501, double = 5.6347704700123827e-315} (raw 0x0000000043fa8000) (gdb) p/f $ft0.float $1 = 501 (gdb) p/d $ft0.float $2 = 1140490240 (gdb) p/x $ft0.float $3 = 0x43fa8000 To fix this test I now print the float registers using the /f format rather than /d. With this change the test now passes. 2022-08-09 Stepan Nemec Another gas manual typo correction. Fix typos in assembler documentation. 2022-08-09 Feiyang Chen gdb/gdbserver: LoongArch: Improve implementation of fcc registers The current implementation of the fcc register is referenced to the user_fp_state structure of the kernel uapi [1]. struct user_fp_state { uint64_t fpr[32]; uint64_t fcc; uint32_t fcsr; }; But it is mistakenly defined as a 64-bit fputype register, resulting in a confusing output of "info register". (gdb) info register ... fcc {f = 0x0, d = 0x0} {f = 0, d = 0} ... According to "Condition Flag Register" in "LoongArch Reference Manual" [2], there are 8 condition flag registers of size 1. Use 8 registers of uint8 to make it easier for users to view the fcc register groups. (gdb) info register ... fcc0 0x1 1 fcc1 0x0 0 fcc2 0x0 0 fcc3 0x0 0 fcc4 0x0 0 fcc5 0x0 0 fcc6 0x0 0 fcc7 0x0 0 ... [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/loongarch/include/uapi/asm/ptrace.h [2] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#_condition_flag_register 2022-08-09 Nick Clifton Default to enabling colored disassembly if output is to a terminal. PR 29457 * objdump.c (disassembler_color): Change type to an enum. (disassembler_extended_color): Remove. (usage): Update. (objdump_color_for_assembler_style): Update. (main): Update initialisation of disassembler_color. If not initialised via a command line option, set based upon terminal output. * doc/binutils.texi: Update description of disassmbler-color option. * testsuite/binutils-all/arc/objdump.exp: Add --disassembler-color=off option when disassembling. * testsuite/binutils-all/arm/objdump.exp: Likewise. 2022-08-09 Aditya Vidyadhar Kamath Fix-for-multiple-thread-detection-in-AIX. In AIX multiple threads were not added. This patch is a fix for the same When we create a pthread debug session we have callbacks to read symbols and memory. One of those call backs is pdc_read_data. Before we come into aix-thread wait() we switch to no thread and therefore the current thread is null. When we get into pdc_read_data we have a dependency that we need to be in the correct current thread that has caused an event of new thread, inorder to read memory. Hence we switch to the correct thread. This is done by passing the pid in the pthdb_user_t user_current_pid parameter in every call back. 2022-08-09 Tom de Vries [gdb/testsuite] Fix gdb.dwarf2/debug-names.exp When running test-case gdb.dwarf2/debug-names.exp on openSUSE Tumbleweed, I run into: ... (gdb) maint info symtabs^M ... ERROR: internal buffer is full. UNRESOLVED: gdb.dwarf2/debug-names.exp: break _start expanded symtab ... Fix this by simplifying the test-case to print _start rather running to it. Tested on x86_64-linux. 2022-08-09 Andrew Burgess gdb/riscv: use register name enum values in riscv-linux-nat.c There were a few places where we were using integer values rather than the RISCV_*_REGNUM constants defined in riscv-tdep.h. This commit replaces 0 with RISCV_ZERO_REGNUM and 32 with RISCV_PC_REGNUM in a few places. There should be no user visible changes after this commit. 2022-08-09 Jan Beulich x86-64: adjust MOVQ to/from SReg attributes It is unclear to me why the corresponding MOV (no Q suffix) can be issued without REX.W, but MOVQ has to have that prefix (bit). Add NoRex64 and in exchange drop Size64. x86: adjust MOVSD attributes The non-SSE2AVX form of the SIMD variant of the instruction needlessly has the (still multi-purpose) IgnoreSize attribute. All other similar SSE2 insns use NoRex64 instead. Make this consistent, noting that the SSE2AVX form can't have the same change made - there the memory operand doesn't at the same time permit RegXMM (which logic uses when deciding whether a Q suffix is okay outside of 64-bit mode). x86: fold AVX VGATHERDPD / VPGATHERDQ While the other three variants each differ in attributes and hence can't be folded, these two pairs actually can be (and were previously overlooked). This effectively matches their AVX512VL counterparts, which are also expressed as a single template. x86: allow use of broadcast with X/Y/Z-suffixed AVX512-FP16 insns While the x/y/z suffix isn't necessary to use in this case, it is still odd that these forms don't support broadcast (unlike their AVX512F / AVX512DQ counterparts). The lack thereof can e.g. make macro-ized programming more difficult. x86/Intel: split certain AVX512-FP16 VCVT*2PH templates One more place where pre-existing templates should have been taken as a basis: In Intel syntax we want to consistently issue an "ambiguous operand size" error when a size-less memory operand is specified for an insn where register use alone isn't sufficient for disambiguation. 2022-08-09 Jiangshuai Li gdb/csky fix build error in ubuntu20_04 build error in: https://builder.sourceware.org/buildbot/#/builders/170/builds/246 ... ../../binutils-gdb/gdb/csky-linux-tdep.c: In function ‘void csky_supply_fregset(const regset*, regcache*, int, const void*, size_t)’: ../../binutils-gdb/gdb/csky-linux-tdep.c:194:18: error: format ‘%ld’ expects argument of type ‘long int’, but argument 2 has type ‘size_t’ {aka ‘unsigned int’} [-Werror=format=] 194 | warning (_("Unknow size %ld of section .reg2, can not get value" | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 195 | " of float registers."), len); ... Fix it via using %s vs pulongest suggested by Tom. 2022-08-09 GDB Administrator Automatic date update in version.in 2022-08-08 Tom Tromey Fix regression from gdbarch registry change The gdbarch registry patch introduced a regression that could cause a crash when opening files in gdb. The bug is that, previously, the solib ops would default to current_target_so_ops; but the patch changed this code to default to nullptr. This patch fixes the bug by reintroducing the earlier behavior. This is PR gdb/29449. I managed to reproduce the bug with a riscv-elf build and then verified that this fixes the problem. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29449 2022-08-08 Martin Liska add splay tree for info_ptr -> CU mapping While using perf top for MozillaThunderbird I noticed quite some slow dissably call with source code involved. E.g. time ./objdump --start-address=0x0000000004e0dcd0 --stop-address=0x0000000004e0df8b -l -d --no-show-raw-insn -S -C /usr/lib64/thunderbird/libxul.so took 2.071s and I noticed quite some time is spent in find_abstract_instance: 33.46% objdump objdump [.] find_abstract_instance 18.22% objdump objdump [.] arange_add 13.77% objdump objdump [.] read_attribute_value 4.82% objdump objdump [.] comp_unit_maybe_decode_line_info 3.10% objdump libc.so.6 [.] __memset_avx2_unaligned_erms where linked list of CU is iterated when searing for where info_ptr belongs to: : 3452 for (u = unit->prev_unit; u != NULL; u = u->prev_unit) 0.00 : 4c61f7: mov 0x10(%rbx),%rax 0.00 : 4c61fb: test %rax,%rax 0.00 : 4c61fe: je 4c6215 : 3453 if (info_ptr >= u->info_ptr_unit && info_ptr < u->end_ptr) 0.00 : 4c6200: cmp 0x60(%rax),%rdx 83.20 : 4c6204: jb 4c620c 0.00 : 4c6206: cmp 0x78(%rax),%rdx 6.89 : 4c620a: jb 4c6270 : 3452 for (u = unit->prev_unit; u != NULL; u = u->prev_unit) 0.00 : 4c620c: mov 0x10(%rax),%rax 7.90 : 4c6210: test %rax,%rax 0.00 : 4c6213: jne 4c6200 The following scan can be replaced with search in a splay tree and with that I can get to 1.5s and there are other symbols where the difference is even bigger. bfd/ChangeLog: PR 29081 * dwarf2.c (struct addr_range): New. (addr_range_intersects): Likewise. (splay_tree_compare_addr_range): Likewise. (splay_tree_free_addr_range): Likewise. (struct dwarf2_debug_file): Add comp_unit_tree. (find_abstract_instance): Use the splay tree when searching for a info_ptr. (stash_comp_unit): Insert to the splay tree. (_bfd_dwarf2_cleanup_debug_info): Clean up the splay tree. 2022-08-08 Martin Liska dwarf: use find_abstract_instance for vars and DW_AT_specification The following simple test case fails when dwz is used: $ cat demo.C namespace std { enum { _S_fixed, _S_floatfield = _S_fixed }; struct { struct {}; } __ioinit; } int main() { return 0; } $ g++ demo.C -g && cp a.out b.out && dwz -m xxx.so a.out b.out && objdump -S a.out >/dev/null objdump: DWARF error: could not find variable specification at offset 0x3d3 As seen the reference is defined in xxx.so shared part: $ eu-readelf -w -N a.out | grep -A3 -B3 3d3 decl_column (data1) 11 sibling (ref_udata) [ 387] [ 387] variable abbrev: 30 specification (GNU_ref_alt) [ 3d3] location (exprloc) [ 0] addr 0x404019 [ 396] subprogram abbrev: 32 $ eu-readelf -w -N a.out | less ... Compilation unit at offset 920: Version: 5, Abbreviation section offset: 0, Address size: 8, Offset size: 4 Unit type: partial (3) ... [ 3d3] variable abbrev: 31 name (strp) "__ioinit" decl_file (data1) demo.C (10) decl_line (data1) 6 decl_column (data1) 3 type (ref_udata) [ 3c4] declaration (flag_present) yes With the patch the same output is emitted as before usage of dwz. bfd/ChangeLog: PR 29442 * dwarf2.c (struct varinfo): Use const char * type. (scan_unit_for_symbols): Call find_abstract_instance for DW_AT_specification for variables that can be in a different CU (e.g. done by dwz) 2022-08-08 Tsukasa OI Mach-O: i18n enablement on some error messages. * config/obj-macho.c (obj_mach_o_get_section_names): Wrap two string literals within with gettext macro. 2022-08-08 Martin Liska ld: fix NEWS typos ld/ChangeLog: * NEWS: Fix 2 typos. 2022-08-08 Nick Clifton Add a link to the NEWS files in the release announcement email. 2022-08-08 Jiangshuai Li gdb/csky support .reg2 for kernel 4.x and later When kernel's version >= 4.x, the size of .reg2 section will be 400. Contents of .reg2 are { unsigned long vr[96]; unsigned long fcr; unsigned long fesr; unsigned long fid; unsigned long reserved; }; VR[96] means: (vr0~vr15) + (fr16~fr31), each Vector register is 128-bits, each Float register is 64 bits, the total size is (4*96). In addition, for fr0~fr15, each FRx is the lower 64 bits of the corresponding VRx. So fr0~fr15 and vr0~vr15 regisetrs use the same offset. 2022-08-08 GDB Administrator Automatic date update in version.in 2022-08-07 Tom de Vries [gdb/build] Fix build with gcc 4.8.5 When building with gcc 4.8.5, I run into: ... user-regs.c:85:1: error: could not convert \ ‘{0l, (& builtin_user_regs.gdb_user_regs::first)}’ from \ ‘’ to ‘gdb_user_regs’ }; ^ ... Fix this by removing the initialization and handling regs.last == nullptr in append_user_reg. Tested on x86_64-linux. 2022-08-07 Tom de Vries [gdb/symtab] Fix assert in read_addrmap_from_aranges When loading the debug-names-duplicate-cu executable included in this test-case, we run into: ... (gdb) file debug-names-duplicate-cu^M Reading symbols from debug-names-duplicate-cu...^M src/gdb/dwarf2/read.c:2353: internal-error: read_addrmap_from_aranges: \ Assertion `insertpair.second' failed.^M ... This assert was added in recent commit 75337cbc147 ("[gdb/symtab] Fix .debug_aranges duplicate offset warning"). The assert triggers because the CU table in the .debug_names section contains a duplicate: ... Version 5 Augmentation string: 47 44 42 00 ("GDB") CU table: [ 0] 0x0 [ 1] 0x0 ... Fix this by rejecting the .debug_names index: ... (gdb) file debug-names-duplicate-cu^M Reading symbols from debug-names-duplicate-cu...^M warning: Section .debug_names has duplicate entry in CU table, \ ignoring .debug_names.^M ... Likewise for the case where the CU table is not sorted by increasing offset. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29436 2022-08-07 Tom de Vries [gdb/testsuite] Add support for .debug_names in dwarf assembler Add: - support for a per-module .debug_names section in the dwarf assembler, and - a test-case excercising this new functionality. A per-module .debug_names section needs to have an entry in the CU list for each CU in the module, which is made more difficult by two things: - linking in other objects, which may contain additional CUs (typically the case on openSUSE), and - adding dummy CUs in the dwarf assembler. We handle this by: - compiling with -nostartfiles (so the test-case contains _start rather than main), and - disabling the dummy CU generation for the test-case. I've kept things simple by having the test-case specify the hash value, rather than adding that functionality in the dwarf assembler. Also I've kept the bucket count to 1, which makes it trivial to satisfy the requirement that "the symbol is entered into a bucket whose index is the hash value modulo bucket_count". The readelf dump of the .debug_names section from the test-case looks like: ... Version 5 Augmentation string: 47 44 42 00 ("GDB") CU table: [ 0] 0x0 TU table: Foreign TU table: Used 1 of 1 bucket. Out of 2 items there are 1 bucket clashes (longest of 1 entries). Symbol table: [ 0] #eddb6232 _start: <1> DW_TAG_subprogram DW_IDX_compile_unit=0 [ 1] #0b888030 int: <2> DW_TAG_base_type DW_IDX_compile_unit=0 ... Tested on x86_64-linux. 2022-08-07 GDB Administrator Automatic date update in version.in 2022-08-06 Alan Modra asan: heap buffer overflow in _bfd_error_handler On coff_slurp_symbol_table printing "unrecognized storage class" for a symbol error. If the symbol name is the last string in its section and not terminated, we run off the end of the buffer. * coffgen.c (build_debug_section): Terminate the section with an extra 0. 2022-08-06 Alan Modra asan: segfault in coff_write_auxent_fname More fuzzed input file nonsense. * coffgen.c (coff_write_symbol): Don't call coff_write_auxent_fname when extrap is NULL. 2022-08-06 Alan Modra msan: bfd_mach_o_layout_commands use of uninitialised value Catches fuzzed input with unterminated strings that later run off the end of their buffers when calling strlen. * mach-o.c: Use size_t vars where approprite. (bfd_mach_o_alloc_and_read): Add "extra" param. Allocate that much extra and clear. Update all callers, those that set up strings with one extra byte. 2022-08-06 Alan Modra objcopy section alignment bfd_set_section_alignment currently always returns true. This patch changes it to return false on silly alignment values, avoiding yet another way to trigger ubsan errors like coffcode.h:3192:12: runtime error: shift exponent 299 is too large for 32-bit type 'int'. We'll catch that one in objcopy.c:setup_sections. However, setup_sections gives up on other setup operations that are necessary even after an error of some sort. Change that to keep going, which might change the error message but that shouldn't matter in the least. bfd/ * section.c (bfd_set_section_alignment): Return false and don't set alignment_power for stupidly large alignments. * bfd-in2.h: Regenerate. * coffcode.h (coff_compute_section_file_positions): Don't use an int constant when calculating alignment. binutils/ * objcopy.c (setup_section): Keep on going after hitting non-fatal errors. 2022-08-06 Alan Modra ubsan: som.c undefined shift in som_set_reloc_info Do the shift using unsigned variables to avoid UB on << 8. * som.c (som_set_reloc_info): Make v unsigned. Localise some variables to their blocks. 2022-08-06 GDB Administrator Automatic date update in version.in 2022-08-05 Alan Modra Get rid of BFD_VMA_FMT Remove the BFD_VMA_FMT defines in bfd.h and configure support. * bfd-in.h (BFD_VMA_FMT): Don't define. * configure.ac (BFD_INT64_FMT): Remove configure test. * configure.com: Likewise. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. 2022-08-05 Alan Modra Don't use BFD_VMA_FMT in gdb and sim Like commit b82817674f, this replaces BFD_VMA_FMT "x" in sim/ with PRIx64 and casts to promote bfd_vma to uint64_t. The one file using BFD_VMA_FMT in gdb/ instead now uses hex_string, and a typo in the warning message is fixed. 2022-08-05 Tom de Vries [gdb/build] Fix build breaker in language.c with gcc 7.5.0 When building gdb on openSUSE Leap 15.3, using gcc 7.5.0, I run into: ... gdb/language.c: In constructor ‘constexpr language_gdbarch::language_gdbarch()’: gdb/language.c:921:8: error: use of deleted function \ ‘language_arch_info::language_arch_info(const language_arch_info&)’ struct language_gdbarch ^~~~~~~~~~~~~~~~ In file included from gdbsupport/common-defs.h:104:0, from gdb/defs.h:28, from gdb/language.c:31: gdb/language.h:95:28: note: declared here DISABLE_COPY_AND_ASSIGN (language_arch_info); ^ include/ansidecl.h:342:3: note: in definition of macro \ ‘DISABLE_COPY_AND_ASSIGN’ TYPE (const TYPE&) = delete; \ ^~~~ gdb/language.c: In function ‘language_gdbarch* get_language_gdbarch(gdbarch*)’: gdb/language.c:936:22: note: synthesized method ‘constexpr \ language_gdbarch::language_gdbarch()’ first required here l = new struct language_gdbarch; ^~~~~~~~~~~~~~~~ ... This seems to be fixed by this change in the struct language_gdbarch definition: ... - struct language_arch_info arch_info[nr_languages] {}; + struct language_arch_info arch_info[nr_languages]; ... Tested on x86_64-linux. 2022-08-05 Tom de Vries [gdb] Add unit test for gdb::sequential_for_each With commit 18a5766d09c ("[gdbsupport] Add sequential_for_each") I added a drop-in replacement for gdb::parallel_for_each, but there's nothing making sure that the two remain in sync. Extend the unit test for gdb::parallel_for_each to test both. Do this using a slightly unusual file-self-inclusion. Doing so keep things readable and maintainable, and avoids macrofying functions. Tested on x86_64-linux. 2022-08-05 Tom de Vries [gdb/symtab] Use task size in parallel_for_each in dwarf2_build_psymtabs_hard In dwarf2_build_psymtabs_hard, we use a parallel_for_each to distribute CUs over threads. Ensuring a fair distribution over the worker threads and main thread in terms of number of CUs might not be the most efficient way, given that CUs can vary in size. Fix this by using per_cu->get_length () as the task size. I've used this experiment to verify the performance impact: ... $ for n in $(seq 1 10); do \ time gdb -q -batch ~/firefox/libxul.so-93.0-1.1.x86_64.debug \ 2>&1 \ | grep "real:"; \ done ... and without the patch got: ... real: 4.71 real: 4.88 real: 4.29 real: 4.30 real: 4.65 real: 4.27 real: 4.27 real: 4.27 real: 4.75 real: 4.41 ... and with the patch: ... real: 3.68 real: 3.81 real: 3.80 real: 3.68 real: 3.75 real: 3.69 real: 3.69 real: 3.74 real: 3.67 real: 3.74 ... so that seems a reasonable improvement. With parallel_for_each_debug set to true, we get some more detail about the difference in behaviour. Without the patch we have: ... Parallel for: n_elements: 2818 Parallel for: minimum elements per thread: 1 Parallel for: elts_per_thread: 704 Parallel for: elements on worker thread 0 : 705 Parallel for: elements on worker thread 1 : 705 Parallel for: elements on worker thread 2 : 704 Parallel for: elements on worker thread 3 : 0 Parallel for: elements on main thread : 704 ... and with the patch: ... Parallel for: n_elements: 2818 Parallel for: total_size: 1483674865 Parallel for: size_per_thread: 370918716 Parallel for: elements on worker thread 0 : 752 (size: 371811790) Parallel for: elements on worker thread 1 : 360 (size: 371509370) Parallel for: elements on worker thread 2 : 1130 (size: 372681710) Parallel for: elements on worker thread 3 : 0 (size: 0) Parallel for: elements on main thread : 576 (size: 367671995) ... Tested on x86_64-linux. 2022-08-05 Tom de Vries [gdbsupport] Add task size parameter in parallel_for_each Add a task_size parameter to parallel_for_each, defaulting to nullptr, and use the task size to distribute similarly-sized chunks to the threads. Tested on x86_64-linux. 2022-08-05 Pedro Alves Introduce gdb::make_function_view This adds gdb::make_function_view, which lets you create a function view from a callable without specifying the function_view's template parameter. For example, this: auto lambda = [&] (int) { ... }; auto fv = gdb::make_function_view (lambda); instead of: auto lambda = [&] (int) { ... }; gdb::function_view fv = lambda; It is particularly useful if you have a template function with an optional function_view parameter, whose type depends on the function's template parameters. Like: template void my_function (T v, gdb::function_view callback = nullptr); For such a function, the type of the callback argument you pass must already be a function_view. I.e., this wouldn't compile: auto lambda = [&] (int) { ... }; my_function (1, lambda); With gdb::make_function_view, you can write the call like so: auto lambda = [&] (int) { ... }; my_function (1, gdb::make_function_view (lambda)); Unit tests included. Tested by building with GCC 9.4, Clang 10, and GCC 4.8.5, on x86_64 GNU/Linux, and running the unit tests. Change-Id: I5c4b3b4455ed6f0d8878cf1be189bea3ee63f626 2022-08-05 Nick Clifton Update following 2.39 release 2022-08-05 Alan Modra asan: ppc64_elf_get_synthetic_symtab heap buffer overflow Fuzzed input files with sizes of .dynamic not a multiple of dynamic tag size can result in reading past the end of the buffer with the current simple checks. Fix that, and use the same check in other files that process input object .dynamic section. (There is no need for buffer overflow checks in the linker's generated .dynamic section.) * elf32-ppc.c (ppc_elf_get_synthetic_symtab): Sanity check .dynamic content buffer reads. * elf64-ppc.c (ppc64_elf_get_synthetic_symtab): Likewise. * elf64-ia64-vms.c (elf64_vms_link_add_object_symbols): Likewise. * elf.c (_bfd_elf_print_private_bfd_data): Simplify .dynamic buffer sanity checks. * elflink.c (elf_link_add_object_symbols): Avoid possible UB subtracting sizeof_dyn from pointer. 2022-08-05 Alan Modra Sanity check loc_offsets index Fixes a segfault found by the fuzzers. * dwarf.c (fetch_indexed_value): Return -1 on error. (read_and_display_attr_value): Don't display string when fetch_indexed_value returns an error. Sanity check loc_offsets index. 2022-08-05 Jan Beulich binutils/Dwarf: avoid "shadowing" of glibc function name As before: Old enough glibc has an (unguarded) declaration of index() in string.h, which triggers a "shadows a global declaration" warning. 2022-08-05 Tsukasa OI gas: fix a testcase broken by new ZSTD support The commit 1369522f36eece1b37139a81f7f2139ba3915172 ("Recognize the new ELF compression type for ZSTD.") added the new ELF compression type but it accidentally broke a GAS testcase. Since testing for the section type "2048" (SHF_COMPRESSED) is not going to be portable in the long term, it now tests SHF_LINK_ORDER ("128") instead. Using SHF_LINK_ORDER (with possibly sh_link == 0) is an idea by Jan Beulich. gas/ChangeLog: * testsuite/gas/elf/section10.s: Use SHF_LINK_ORDER to test mixed numeric and alpha values. * testsuite/gas/elf/section10.d: Reflect the change above. 2022-08-05 Nick Clifton When gas/read.c calls mbstowcs with a NULL destination, it should set size to 0 PR 29447 * read.c (read_symbol_name): Pass 0 as the length parameter when invoking mbstowc in order to check the validity of a wide string. 2022-08-05 Tom de Vries [gdb] Add debug_{exp,val} When debugging cc1 I heavily rely on simple one-parameter debug functions that allow me to inspect a variable of a common type, like: - debug_generic_expr - debug_gimple_stmt - debug_rtx and I miss similar functions in gdb. Add functions to dump variables of types 'value' and 'expression': - debug_exp, and - debug_val. Tested on x86_64-linux, by breaking on varobj_create, and doing: ... (gdb) call debug_exp (var->root->exp.get ()) &"Operation: OP_VAR_VALUE\n" &" Block symbol:\n" &" Symbol: aaa\n" &" Block: 0x2d064f0\n" (gdb) ... and: ... (gdb) call debug_val (value) &"5" (gdb) ... 2022-08-05 Luca Boccassi Add gold support for --package-metadata option. Following the same format as the implementation in ld: 9e2bb0cb5e74aed4158f08495534922d7108f928 Generate a .note.package FDO package metadata ELF note, following the spec: https://systemd.io/ELF_PACKAGE_METADATA/ If the jansson library is available at build time (and it is explicitly enabled), link ld to it, and use it to validate that the input is correct JSON, to avoid writing garbage to the file. The configure option --enable-jansson has to be used to explicitly enable it (error out when not found). This allows bootstrappers (or others who are not interested) to seamlessly skip it without issues. elfcpp/ * elfcpp.h: Add FDO_PACKAGING_METADATA note type. gold/ * Makefile.am: Add jansson flags and libraries. * configure.ac: Check for jansson library. * layout.cc (Layout::create_notes): Call create_package_metadata(). (Layout::create_package_metadata): New function. * layout.h (Layout::create_package_metadata): New function. (Layout::package_metadata_note_): New data member. * options.h (class General_options): Add --package-metadata option. * testsuite/Makefile.am (object_unittest): Add jansson libraries. (binary_unittest): Likewise. (leb128_unittest): Likewise. (overflow_unittest): Likewise. (package_metadata_test): New test. * testsuite/package_metadata_main.c: New test source. 2022-08-05 Cary Coutant Recognize the new ELF compression type for ZSTD. There is more work to be done to actually support compression and decompression using the zstd library, but I will leave that to the champions of the new compression option. binutils/ * binutils/readelf.c (process_section_headers): Add support for ELFCOMPRESS_ZSTD. 2022-08-05 GDB Administrator Automatic date update in version.in 2022-08-04 Tom Tromey Use registry in gdbarch gdbarch implements its own registry-like approach. This patch changes it to instead use registry.h. It's a rather large patch but largely uninteresting -- it's mostly a straightforward conversion from the old approach to the new one. The main benefit of this change is that it introduces type safety to the gdbarch registry. It also removes a bunch of code. One possible drawback is that, previously, the gdbarch registry differentiated between pre- and post-initialization setup. This doesn't seem very important to me, though. 2022-08-04 Tom Tromey Allow registry to refer to const types So far, the registry hasn't been used to refer to a 'const' type, but this changes with the gdbarch change. This patch arranges to let the registry store a pointer-to-const, by removing const in the 'set' method. Use new and delete for gdbarch This changes gdbarch to use new and delete. Use bool in gdbarch This changes gdbarch to use bool for initialized_p. 2022-08-04 Tom de Vries [gdb/testsuite] Fix .debug_aranges in gdb.dwarf2/fission-loclists.S When running test-case gdb.dwarf2/fission-loclists.exp, I noticed: ... warning: Section .debug_aranges in fission-loclists has duplicate \ debug_info_offset 0x8f, ignoring .debug_aranges.^M ... Fix this by removing the duplicate .debug_aranges entry. Tested on x86_64-linux. 2022-08-04 Tom de Vries [gdb/testsuite] Fix ERROR in gdb.base/watchpoint-unaligned.exp In PR23888 an error is reported: ... ERROR: tcl error sourcing watchpoint-unaligned.exp. ERROR: expected boolean value but got "" while executing "if {$wpnum} { ... This presumably happens when: - skip_hw_watchpoint_tests returns 0 meaning hw watchpoints are supported - gdb fails to set a hw watchpoint and instead sets a sw watchpoint That particular situation is handled for arm: ... -re "Watchpoint (\[0-9\]+): .*\r\n$gdb_prompt $" { if {[istarget "arm*-*-*"]} { untested $test set wpnum 0 } } ... but not for any other targets so wpnum remains "", triggering the ERROR. Possibly this has been fixed for powerpc by commit 8d4e4d13afb ("gdb Power 9 add test for HW watchpoint support."), but it's still possible for other targets. Fix this by: - initializing wpnum to 0 instead of "" - signalling the failure to set a hw watchpoint by a fail Tested on x86_64-linux, also by adding: ... gdb_test_no_output "set can-use-hw-watchpoints 0" ... and verifying that it triggers the fail. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=23888 2022-08-04 Tom de Vries [gdb/tdep] Fix gdb.base/large-frame.exp for aarch64 On aarch64, I run into: ... FAIL: gdb.base/large-frame.exp: optimize=-O0: backtrace ... The problem is that the architecture-specific prologue analyzer fails to handle the first two insns in the prologue properly: ... 0000000000400610 : 400610: d2880210 mov x16, #0x4010 400614: cb3063ff sub sp, sp, x16 400618: a9007bfd stp x29, x30, [sp] 40061c: 910003fd mov x29, sp 400620: 910043a0 add x0, x29, #0x10 400624: 97fffff0 bl 4005e4 ... so we get: ... $ gdb -q -batch ./outputs/gdb.base/large-frame/large-frame-O0 -ex "b func" Breakpoint 1 at 0x400614 ... Fix this by: - fixing the support for the first insn to extract the immediate operand, and - adding support for the second insn, such that we have: ... Breakpoint 1 at 0x400624 ... Note that we're overshooting by one insn (0x400620 is the first insn after the prologue), but that's a pre-existing problem. Tested on aarch64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29408 2022-08-04 Alan Modra Don't use BFD_VMA_FMT in binutils BFD_VMA_FMT can't be used in format strings that need to be translated, because the translation won't work when the type of bfd_vma differs from the machine used to compile .pot files. We've known about this for a long time, but patches slip through review. So just get rid of BFD_VMA_FMT, instead using the appropriate PRId64, PRIu64, PRIx64 or PRIo64 and SCN variants for scanf. The patch is mostly mechanical, the only thing requiring any thought is casts needed to preserve PRId64 output from bfd_vma values, or to preserve one of the unsigned output formats from bfd_signed_vma values. 2022-08-04 Alan Modra Re: Get rid of fprintf_vma and sprintf_vma Commit f493c2174e messed the formatting in linker map files, particularly for 32-bit builds where a number of tests using map files regressed. I should have noticed the BFD64 conditional printing of spaces to line up output due to the original %V printing hex vmas with 16 digits when BFD64 and 8 digits when not. Besides that, it is nicer to print 32-bit vmas for 32-bit targets. So change %V back to be target dependent, now using bfd_sprintf_vma. Since minfo doesn't return the number of chars printed, that means some places that currently use %V must instead sprintf to a buffer in order to find the length printed. * ldmisc.h (print_spaces): Declare. (print_space): Change to a macro. * ldmisc.c (vfinfo): Use bfd_sprintf_vma for %V. Tidy %W case. (print_space): Delete. (print_spaces): New function. * emultempl/aix.em (print_symbol): Use print_spaces. * ldctor.c (ldctor_build_sets): Likewise. * ldmain.c (add_archive_element): Likewise. * ldlang.c (print_one_symbol, lang_print_asneeded): Likewise. (print_output_section_statement, print_data_statement): Likewise. (print_reloc_statement, print_padding_statement): Likewise. (print_assignment): Likewise. Also replace %V printing of vmas with printing to a buffer in order to properly format output. (print_input_section, lang_one_common): Likewise. 2022-08-04 Alan Modra MIPS: Use R_MIPS_REL16 for BFD_RELOC_16 R_MIPS_REL16 isn't a pc-relative reloc as the name might indicate. * elf64-mips.c (mips_reloc_map): Map BFD_RELOC_16 to R_MIPS_REL16. * elfn32-mips.c (mips_reloc_map): Likewise. 2022-08-04 GDB Administrator Automatic date update in version.in 2022-08-03 H.J. Lu elf: Reset alignment for each PT_LOAD segment Reset alignment for each PT_LOAD segment to avoid using alignment from the previous PT_LOAD segment. bfd/ PR ld/29435 * elf.c (assign_file_positions_for_load_sections): Reset alignment for each PT_LOAD segment. ld/ PR ld/29435 * testsuite/ld-elf/pr29435.d: New file. * testsuite/ld-elf/pr29435.s: Likewise. 2022-08-03 Tom Tromey Use unique_ptr to destroy per-bfd object In some cases, the objfile owns the per-bfd object. This is yet another object that can sometimes be destroyed before the registry is destroyed, possibly reslting in a use-after-free. Also, I noticed that the condition for deleting the object is not the same as the condition used to create it -- so it could possibly result in a memory leak in some situations. This patch fixes the problem by introducing a new unique_ptr that holds this object when necessary. Use auto_obstack in objfile This changes objfile to use an auto_obstack. This helps prevent use-after-free bugs, because it ensures that anything allocated on the objfile obstack will live past the point at which the registry object is destroyed. Use gdb_bfd_ref_ptr in objfile This changes struct objfile to use a gdb_bfd_ref_ptr. In addition to removing some manual memory management, this fixes a use-after-free that was introduced by the registry rewrite series. The issue there was that, in some cases, registry shutdown could refer to memory that had already been freed. This help fix the bug by delaying the destruction of the BFD reference (and thus the per-bfd object) until after the registry has been shut down. 2022-08-03 Ruud van der Pas gprofng: fix bug 29410 - Argument " 0." isn't numeric in numeric gt (>) gprofng/Changelog: 2022-08-02 Ruud van der Pas PR gprofng/29410 * gp-display-html/gp-display-html.in: Remove non-breaking spaces. 2022-08-03 Alan Modra Fix a conflict between the linker's need to rename some PE format input libraries and the BFD library's file caching mechanism. PR 29389 bfd * bfd.c (BFD_CLOSED_BY_CACHE): New bfd flag. * cache.c (bfd_cache_delete): Set BFD_CLOSED_BY_DELETE on the closed bfd. (bfd_cache_lookup_worker): Clear BFD_CLOSED_BY_DELETE on the newly reopened bfd. * opncls.c (bfd_set_filename): Refuse to change the name of a bfd that has been closed by bfd_cache_delete. Mark changed bfds as uncacheable. * bfd-in2.h: Regenerate. ld * ldlang.h (lang_input_statement_struct): Add sort_key field. * emultempl/pe.em (after_open): If multiple import libraries refer to the same bfd, store their names in the sort_key field. * emultempl/pep.em (after_open): Likewise. * ldlang.c (sort_filename): New function. Returns the filename to be used when sorting input files. (wild_sort): Use the sort_filename function. 2022-08-03 Enze Li gdb/amd64: clean up unused variable When building with clang 15, I got this, CXX amd64-tdep.o amd64-tdep.c:1410:13: error: variable 'insn' set but not used[-Werror,-Wunused-but-set-variable] gdb_byte *insn = insn_details->raw_insn + modrm_offset; ^ 1 error generated. The function that uses this variable has been removed in this commit, commit 870f88f7551b0f2d6aaaa36fb684b5ff8f468107 Date: Mon Apr 18 13:16:27 2016 -0400 remove trivialy unused variables Fix this by removing unused variable. Tested by rebuilding on x86_64-linux with clang 15 and gcc 12. 2022-08-03 Lancelot SIX gdb: Fix regression in varobj recreation Commit bc20e562ec0 "Fix use after free in varobj" introduced a regression. This commit makes sure that the varobj object does not keeps stale references to object being freed when we unload an objfile. This includes the "valid_block" field which is reset to nullptr if the pointed to block is tied to an objfile being freed. However, at some point varobj_invalidate_iter might try to recreate varobjs tracking either floating or globals. Varobj tracking globals are identified as having the "valid_block" field set nullptr, but as bc20e562ec0 might clear this field, we have lost the ability to distinguish between varobj referring to globals and non globals. Fix this by introducing a "global" flag which tracks if a given varobj was initially created as tracking a global. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29426 2022-08-03 Alan Modra Re: PE objdump -x All of these buffer overrun tests are better written as a comparison against size remaining, due to ISO C 9899 standard 6.5.2 para 8 regarding adding a constant to a pointer: "If both the pointer operand and the result point to elements of the same array object, or one past the last element of the array object, the evaluation shall not produce an overflow; otherwise, the behavior is undefined." So "ex_dta + 4" might be undefined behaviour, if you interpret "the array object" in this case to be the malloc'd section contents! * pei-x86_64.c (pex64_get_unwind_info): Tidy sanity checks. (pex64_xdata_print_uwd_codes): Likewise. 2022-08-03 Jan Beulich x86: improve/shorten vector zeroing-idiom optimization conditional - Drop the rounding type check: We're past template matching, and none of the involved insns support embedded rounding. - Drop the extension opcode check: None of the involved opcodes have variants with it being other than None. - Instead check opcode space, even if just to be on the safe side going forward. - Reduce the number of comparisons by folding two groups. x86: properly mark i386-only insns Just like all Size64 insns are marked Cpu64, all Size32 insns ought to be marked Cpu386. x86: also use D for MOVBE First of all rename the meanwhile misleading Opcode_SIMD_FloatD, as it has also been used for KMOV* and BNDMOV. Then simplify the condition selecting which form if "reversing" to use - except for the MOV to/from control/debug/test registers all extended opcode space insns use bit 0 (rather than bit 1) to indicate the direction (from/to memory) of an operation. With that, D can simply be set on the first of the two templates, while the other can be dropped. 2022-08-03 GDB Administrator Automatic date update in version.in 2022-08-03 Cary Coutant Add ELFCOMPRESS_ZSTD. include/elf/ * common.h: Add ELFCOMPRESS_ZSTD. 2022-08-02 John Baldwin fbsd-nat: Correct the return type of the have_regset method. During the development of 40c23d880386d6e8202567eaa2a6b041feb1a652, the return value of fbsd_nat_target::have_regset was changed from a simple boolean to returning the size of the register set. The comments and callers were all updated for this change, but the actual return type was accidentally left as a bool. This change fixes the return type to be a size_t. Current callers of this only checked the value against 0 and thus still worked correctly. 2022-08-02 Jan Beulich ELF: emit symbol table when there are relocations Even when there are no symbols (e.g. all relocations being against absolute values), a symbol table (with just the first placeholder entry) needs to be emitted. Otherwise tools like objdump won't properly process the relocations. The respective checks in assign_section_numbers() and _bfd_elf_compute_section_file_positions() support also this view. Oddly enough so far HAS_RELOC was only set when reading in an object file, but not when generating one anew; the flag would only have been cleared when no relocations were found (anymore). While there also amend the affected function's leading comment to also mention gas. 2022-08-02 Matthew Malcomson ld: aarch64: Adjust TLS relaxation condition In aarch64_tls_transition_without_check and elfNN_aarch64_tls_relax we choose whether to perform a relaxation to an IE access model or an LE access model based on whether the symbol itself is marked as local (i.e. `h == NULL`). This is problematic in two ways. The first is that sometimes a global dynamic access can be relaxed to an initial exec access when creating a shared library, and if that happens on a local symbol then we currently relax it to a local exec access instead. This usually does not happen since we only relax an access if aarch64_can_relax_tls returns true and aarch64_can_relax_tls does not have the same problem. However, it can happen when we have seen both an IE and GD access on the same symbol. This case is exercised in the newly added testcase tls-relax-gd-ie-2. The second problem is that deciding based on whether the symbol is local misses the case when the symbol is global but is still non-interposable and known to be located in the executable. This happens on all global symbols in executables. This case is exercised in the newly added testcase tls-relax-ie-le-4. Here we adjust the condition we base our relaxation on so that we relax to local-exec if we are creating an executable and the relevant symbol we're accessing is stored inside that executable. -- Updating tests for new relaxation criteria Many of the tests added to check our relaxation to IE were implemented by taking advantage of the fact that we did not relax a global symbol defined in an executable. Since a global symbol defined in an executable is still not interposable, we know that a TLS version of such a symbol will be in the main TLS block. This means that we can perform a stronger relaxation on such symbols and relax their accesses to a local-exec access. Hence we have to update all tests that relied on the older suboptimal decision making. The two cases when we still would want to relax a general dynamic access to an initial exec one are: 1) When in a shared library and accessing a symbol which we have already seen accessed with an initial exec access sequence. 2) When in an executable and accessing a symbol defined in a shared library. Both of these require shared library support, which means that these tests are now only available on targets with that. I have chosen to switch the existing testcases from a plain executable to one dynamically linked to a shared object as that doesn't require changing the testcases quite so much (just requires accessing a different variable rather than requiring adding another code sequence). The tls-relax-all testcase was an outlier to the above approach, since it included a general dynamic access to both a local and global symbol and inspected for the difference accordingly. 2022-08-02 Matthew Malcomson ld: aarch64: Update test linker scripts relocs.ld and relocs-ilp32.ld The updates are to ensure that the .data section exists. This means that we always have a data section. That means that we don't create a RWX segment and avoid the corresponding warning. We get this warning when testing aarch64-none-elf with -mcmodel=tiny. N.b. this changes quite a few testcases from fail to pass. 2022-08-02 Victor Do Nascimento arm: Add cfi expression support for ra_auth_code This patch extends assembler support for the use of register names to allow for pseudo-registers, e.g. ra_auth_code register. This is done particularly with CFI directives in mind, allowing for expressions of the type: .cfi_register ra_auth_code, 12 gas/Changelog: * config/tc-arm.c (tc_arm_regname_to_dw2regnum): Add REG_TYPE_PSEUDO handling. * testsuite/gas/arm/cfi-pacbti-m-readelf.d: New. * testsuite/gas/arm/cfi-pacbti-m.s: New. 2022-08-02 Victor Do Nascimento arm: Use DWARF numbering convention for pseudo-register representation This patch modifies the internal `struct reg_entry' numbering of DWARF pseudo-registers to match values assigned in DWARF standards (see "4.1 DWARF register names" in [1])so ra_auth_code goes from 12 to 143 and amends the unwinder .save directive-processing code to correctly handle mixed register-type save directives. The mechanism for splitting the register list is also re-written to comply with register ordering on push statements, being that registers are stored on the stack in numerical order, with the lowest numbered register at the lowest address [2]. Consequently, the parsing of the hypothetical directive .save{r4-r7, r10, ra_auth_core, lr} has been changed such as rather than producing .save{r4-r7, r10} .save{ra_auth_code} .save{lr} as was the case with previous implementation, now produces: .save{lr} .save{ra_auth_code} .save{r4-r7, r10} [1] [2] gas/Changelog: * config/tc-arm.c (REG_RA_AUTH_CODE): New. (parse_dot_save): Likewise. (parse_reg_list): Remove obsolete code. (reg_names): Set ra_auth_code to 143. (s_arm_unwind_save): Handle core and pseudo-register lists via parse_dot_save. (s_arm_unwind_save_mixed): Deleted. (s_arm_unwind_save_pseudo): Handle one register at a time. * testsuite/gas/arm/unwind-pacbti-m-readelf.d: Fix test. * testsuite/gas/arm/unwind-pacbti-m.d: Likewise. 2022-08-02 Alan Modra PE objdump -x objdump -x on PE executables produces lots of "xdata section corrupt" and "corrupt unwind data" warnings, and refuses to dump that info. It turns out that the sanity checks were bad, not the data. Fix them. * pei-x86_64.c (pex64_get_unwind_info): Correct buffer overrun sanity checks. (pex64_xdata_print_uwd_codes): Similarly. 2022-08-02 Jan Beulich x86: XOP shift insns don't really allow B suffix By mistake it was permitted to be used from the very introduction of XOP support. 2022-08-02 GDB Administrator Automatic date update in version.in 2022-08-01 Martin Storsjö ld: Support the -exclude-symbols option via COFF def files, with the EXCLUDE_SYMBOLS keyword This was requested in review. ld: Add support for a new option, -exclude-symbols, in COFF object file directives This maps to the same as ld's --exclude-symbols command line option, but allowing specifying the option via directives embedded in the object files instead of passed manually on the command line. 2022-08-01 Tom de Vries [gdb/symtab] Fix .debug_aranges duplicate offset warning The function read_addrmap_from_aranges contains code to issue a warning: ... if (!insertpair.second) { warning (_("Section .debug_aranges in %s has duplicate " "debug_info_offset %s, ignoring .debug_aranges."), objfile_name (objfile), sect_offset_str (per_cu->sect_off)); return false; } ... but the warning is in fact activated when all_comp_units has duplicate entries, which is very misleading. Fix this by: - adding a test-case that should trigger the warning, - replacing the current implementation of the warning with an assert that all_comp_units should not contain duplicates, and - properly re-implementing the warning, such that it is triggered by the test-case. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29381 2022-08-01 Jan Beulich x86: SKINIT with operand needs IgnoreSize Without it in 16-bit mode a pointless operand size prefix would be emitted. 2022-08-01 WANG Xuerui opcodes: LoongArch: add "ret" instruction to reduce typing This syntactic sugar is present in both classical and emerging architectures, like Alpha, SPARC and RISC-V, and assembler macros doing the same thing can already be found in the wild e.g. [1], proving the feature's popularity. It's better to provide support directly in the assembler so downstream users wouldn't have to re-invent this over and over again. [1]: https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/loongarch/sysdep.h;h=c586df819cd90;hb=HEAD#l28 2022-08-01 WANG Xuerui opcodes: LoongArch: make all non-native jumps desugar to canonical b{lt/ge}[u] forms Also re-order the jump/branch opcodes while at it, so that insns are sorted in ascending order according to opcodes, and the label form preceding the real definition. 2022-08-01 Alan Modra Get rid of fprintf_vma and sprintf_vma These two macros print either a 16 digit hex number or an 8 digit hex number. Unfortunately they depend on both target and host, which means that the output for 32-bit targets may be either 8 or 16 hex digits. Replace them in most cases with code that prints a bfd_vma using PRIx64. In some cases, deliberately lose the leading zeros. This change some output, notably in base/offset fields of m68k disassembly which I think looks better that way, and in error messages. I've kept leading zeros in symbol dumps (objdump -t) and in PE header dumps. bfd/ * bfd-in.h (fprintf_vma, sprintf_vma, printf_vma): Delete. * bfd-in2.h: Regenerate. * bfd.c (bfd_sprintf_vma): Don't use sprintf_vma. (bfd_fprintf_vma): Don't use fprintf_vma. * coff-rs6000.c (xcoff_reloc_type_tls): Don't use sprintf_vma. Instead use PRIx64 to print bfd_vma values. (xcoff_ppc_relocate_section): Likewise. * cofflink.c (_bfd_coff_write_global_sym): Likewise. * mmo.c (mmo_write_symbols_and_terminator): Likewise. * srec.c (srec_write_symbols): Likewise. * elf32-xtensa.c (print_r_reloc): Similarly for fprintf_vma. * pei-x86_64.c (pex64_dump_xdata): Likewise. (pex64_bfd_print_pdata_section): Likewise. * som.c (som_print_symbol): Likewise. * ecoff.c (_bfd_ecoff_print_symbol): Use bfd_fprintf_vma. opcodes/ * dis-buf.c (perror_memory, generic_print_address): Don't use sprintf_vma. Instead use PRIx64 to print bfd_vma values. * i386-dis.c (print_operand_value, print_displacement): Likewise. * m68k-dis.c (print_base, print_indexed): Likewise. * ns32k-dis.c (print_insn_arg): Likewise. * ia64-gen.c (_opcode_int64_low, _opcode_int64_high): Delete. (opcode_fprintf_vma): Delete. (print_main_table): Use PRIx64 to print opcode. binutils/ * od-macho.c: Replace all uses of printf_vma with bfd_printf_vma. * objcopy.c (copy_object): Don't use sprintf_vma. Instead use PRIx64 to print bfd_vma values. (copy_main): Likewise. * readelf.c (CHECK_ENTSIZE_VALUES): Likewise. (dynamic_section_mips_val): Likewise. (print_vma): Don't use printf_vma. Instead use PRIx64 to print bfd_vma values. (dump_ia64_vms_dynamic_fixups): Likewise. (process_version_sections): Likewise. * rddbg.c (stab_context): Likewise. gas/ * config/tc-i386.c (offset_in_range): Don't use sprintf_vma. Instead use PRIx64 to print bfd_vma values. (md_assemble): Likewise. * config/tc-mips.c (load_register, macro): Likewise. * messages.c (as_internal_value_out_of_range): Likewise. * read.c (emit_expr_with_reloc): Likewise. * config/tc-ia64.c (note_register_values): Don't use fprintf_vma. Instead use PRIx64 to print bfd_vma values. (print_dependency): Likewise. * listing.c (list_symbol_table): Use bfd_sprintf_vma. * symbols.c (print_symbol_value_1): Use %p to print pointers. (print_binary): Likewise. (print_expr_1): Use PRIx64 to print bfd_vma values. * write.c (print_fixup): Use %p to print pointers. Don't use fprintf_vma. * testsuite/gas/all/overflow.l: Update expected output. * testsuite/gas/m68k/mcf-mov3q.d: Likewise. * testsuite/gas/m68k/operands.d: Likewise. * testsuite/gas/s12z/truncated.d: Likewise. ld/ * deffilep.y (def_file_print): Don't use fprintf_vma. Instead use PRIx64 to print bfd_vma values. * emultempl/armelf.em (gld${EMULATION_NAME}_finish): Don't use sprintf_vma. Instead use PRIx64 to print bfd_vma values. * emultempl/pe.em (gld${EMULATION_NAME}_finish): Likewise. * ldlang.c (lang_map): Use %V to print region origin. (lang_one_common): Don't use sprintf_vma. * ldmisc.c (vfinfo): Don't use fprintf_vma or sprintf_vma. * pe-dll.c (pe_dll_generate_def_file): Likewise. gdb/ * remote.c (remote_target::trace_set_readonly_regions): Replace uses of sprintf_vma with bfd_sprintf_vma. 2022-08-01 liuzhensong LoongArch: Set defaults to exec stack 0. 2022-08-01 Alan Modra libctf: Avoid use of uninitialised variables * ctf-link.c (ctf_link_add_ctf_internal): Don't free uninitialised pointers. 2022-08-01 Alan Modra PR29348, BFD_VMA_FMT wrong There is a problem with my commit 0e3c1eebb2, which replaced bfd_uint64_t with uint64_t: Some hosts typedef int64_t to long long even when long is the same size as long long. That confuses the code choosing one of "l", "ll", or "I64" for BFD_VMA_FMT, and results in warnings. Write a direct configure test for the printf int64_t style instead. This removes the last use of BFD_HOST_64BIT_LONG, so delete that. Note that the changes to configure.com are pure guesswork. PR 29348 * bfd-in.h (BFD_HOST_64BIT_LONG): Don't define. (BFD_VMA_FMT): Define using BFD_INT64_FMT when 64-bit. (bfd_vma, bfd_signed_vma): Move comments to 64-bit typedefs. * configure.ac (BFD_HOST_64BIT_LONG): Delete. (BFD_INT64_FMT): New config test. * configure.com: Update similarly. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. 2022-08-01 GDB Administrator Automatic date update in version.in 2022-07-31 GDB Administrator Automatic date update in version.in 2022-07-30 Tom de Vries [gdb/testsuite] Fix gdb.ada/literals.exp with aarch64 On aarch64-linux, I run into: ... (gdb) print 16#ffffffffffffffff#^M $7 = 18446744073709551615^M (gdb) FAIL: gdb.ada/literals.exp: print 16#ffffffffffffffff# ... while on x86_64-linux instead, I get: ... (gdb) print 16#ffffffffffffffff#^M $7 = -1^M (gdb) PASS: gdb.ada/literals.exp: print 16#ffffffffffffffff# ... We can easily reproduce this on x86_64-linux using: ... $ gdb -q -batch -ex "set lang ada" -ex "set arch i386" \ -ex "print 16#ffffffffffffffff#" $1 = -1 $ gdb -q -batch -ex "set lang ada" -ex "set arch aarch64" \ -ex "print 16#ffffffffffffffff#" $1 = 18446744073709551615 ... With i386, we have: ... (gdb) p int_bits $3 = 32 (gdb) p long_bits $4 = 32 (gdb) p long_long_bits $5 = 64 ... and so in processInt we hit the fits-in-unsigned-long-long case where we use as type long long: ... /* Note: Interprets ULLONG_MAX as -1. */ yylval.typed_val.type = type_long_long (par_state); ... With aarch64, we have instead: ... (gdb) p int_bits $1 = 32 (gdb) p long_bits $2 = 64 (gdb) p long_long_bits $3 = 64 ... and so in processInt we hit the fits-in-unsigned-long case where we use as type unsigned long: ... yylval.typed_val.type = builtin_type (par_state->gdbarch ())->builtin_unsigned_long; ... It's not clear why for ada we're using long long for the fits-in-unsigned-long-long case. Fix this by using unsigned long long for the fits-in-unsigned-long-long case, meaning the new reference output is 18446744073709551615 instead of -1. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29416 2022-07-30 Simon Marchi gdb/testsuite: add macros test for source files compiled in various ways Using different ways of passing source file paths to compilers results n different file and directory paths in the line header. For example: - gcc foo.c - gcc ./foo.c - gcc ../cwd/foo.c - gcc $PWD/foo.c Because of this, GDB sometimes failed to look up macros. The previous patch fixed that as much as possible. This patch adds the corresponding tests. Add both a DWARF assembler-based test and a regular test. The DWARF assembled-based one tests some hard-coded debug info based on what I have observed some specific versions of gcc and clang generate. We want to make sure that GDB keeps handling all these cases correctly, even if it's not always clear whether they are really valid DWARF. Also, they will be tested no matter what the current target compiler is for a given test run. The regular test is compiled using the target compiler, so it may help find bugs when testing against some other toolchains than what was used to generate the DWARF assembler-based test. For the DWARF assembler-based test, add to testsuite/lib/dwarf.exp the necessary code to generate a DWARF5 .debug_macro section. The design of the new procs is based on what was done for rnglists and loclists. To test against a specific compiler one can use this command, for example: $ make check TESTS="gdb.base/macro-source-path.exp" RUNTESTFLAGS="CC_FOR_TARGET=clang --target_board unix/gdb:debug_flags=-gdwarf-5" Change-Id: Iab8da498e57d10cc2a3d09ea136685d9278cfcf6 2022-07-30 Simon Marchi gdb: remove code to prepend comp dir in buildsym_compunit::start_subfile The bit of code removed by this patch was introduced to fix the same kind of problem that the previous patch fixes. That is, to try to match existing subfiles when different name forms are used to refer to a same file. The thread for the patch that introduced this code is: https://pi.simark.ca/gdb-patches/45F8CBDF.9090501@hq.tensilica.com/ The important bits are that the compiler produced a compilation unit with: DW_AT_name : test.c DW_AT_comp_dir : /home/maxim/W/BadgerPass/PR_14999 and DWARF v2 line table with: The Directory Table: /home/maxim/W/BadgerPass/PR_14999 The File Name Table: Entry Dir Time Size Name 1 1 1173897037 152 test.c Because the main symtab was created with only DW_AT_name, it was named "test.c". And because the path built from the line header contained the "directory" part, it was "/home/maxim/W/BadgerPass/PR_14999/test.c". Because of this mismatch, thing didn't work, so they added this code to prepend the compilation directory to the existing subfile names, so that this specific case would work. With the changes done earlier in this series, where subfiles are identified using the "most complete path possible", this case would be handled. The main subfile's would be "/home/maxim/W/BadgerPass/PR_14999/test.c" from the start (DW_AT_comp_dir + DW_AT_name). It's not so different from some DWARF 5 cases actually, which make the compilation directory explicit in the line table header. I therefore think that this code is no longer needed. It does feel like a quick hack to make one specific case work, and we have a more general solution now. Also, this code was introduced to work around a problem in the DWARF debug info or the DWARF debug info reader. In general, I think it's preferable for these hacks to be located in the specific debug info reader code, rather than in the common code. Even though this code was added to work around a DWARF reader problem, it's possible that some other debug info reader has started taking advantage of this code in the mean time. It's very difficult to know or verify, but I think the likelyhood is quite small, so I'm proposing to get rid of it to simplify things a little bit. Change-Id: I710b8ec0d449d1b110d67ddf9fcbdb2b37108306 2022-07-30 Simon Marchi gdb: add "id" fields to identify symtabs and subfiles Printing macros defined in the main source file doesn't work reliably using various toolchains, especially when DWARF 5 is used. For example, using the binaries produced by either of these commands: $ gcc --version gcc (GCC) 11.2.0 $ ld --version GNU ld (GNU Binutils) 2.38 $ gcc test.c -g3 -gdwarf-5 $ clang --version clang version 13.0.1 $ clang test.c -gdwarf-5 -fdebug-macro I get: $ ./gdb -nx -q --data-directory=data-directory a.out (gdb) start Temporary breakpoint 1 at 0x111d: file test.c, line 6. Starting program: /home/simark/build/binutils-gdb-one-target/gdb/a.out Temporary breakpoint 1, main () at test.c:6 6 return ZERO; (gdb) p ZERO No symbol "ZERO" in current context. When starting to investigate this (taking the gcc-compiled binary as an example), we see that GDB fails to look up the appropriate macro scope when evaluating the expression. While stopped in macro_lookup_inclusion: (top-gdb) p name $1 = 0x62100011a980 "test.c" (top-gdb) p source.filename $2 = 0x62100011a9a0 "/home/simark/build/binutils-gdb-one-target/gdb/test.c" `source` is the macro_source_file that we would expect GDB to find. `name` comes from the symtab::filename field of the symtab we are stopped in. GDB doesn't find the appropriate macro_source_file because the name of the macro_source_file doesn't match exactly the name of the symtab. The name of the main symtab comes from the compilation unit's DW_AT_name, passed to the buildsym_compunit's constructor: https://gitlab.com/gnutools/binutils-gdb/-/blob/4815d6125ec580cc02a1094d61b8c9d1cc83c0a1/gdb/dwarf2/read.c#L10627-10630 The contents of DW_AT_name, in this case, is "test.c". It is typically (what I witnessed all compilers do) the same string that was passed to the compiler on the command-line. The name of the macro_source_file comes from the line number program header's file table, from the call to the line_header::file_file_name method: https://gitlab.com/gnutools/binutils-gdb/-/blob/4815d6125ec580cc02a1094d61b8c9d1cc83c0a1/gdb/dwarf2/macro.c#L54-65 line_header::file_file_name prepends the directory path that the file entry refers to, in the file table (if the file name is not already absolute). In this case, the file name is "test.c", appended to the directory "/home/simark/build/binutils-gdb-one-target/gdb". Because the symtab's name is not created the same way as the macro_source_file's name is created, we get this mismatch. GDB fails to find the appropriate macro scope for the symtab, and we can't print macros when stopped in that symtab. To make this work, we must ensure that paths produced in these two ways end up identical. This can be tricky because of the different ways a path can be passed to the compiler by the user. Another thing to consider is that while the main symtab's name (or subfile, before it becomes a symtab) is created using DW_AT_name, the main symtab is also referred to using its entry in the line table header's file table, when processing the line table. We must therefore ensure that the same name is produced in both cases, so that a call to "start_subfile" for the main subfile will correctly find the already-created subfile, created by buildsym_compunit's constructor. If we fail to do that, things still often work, because of a fallback: the watch_main_source_file_lossage method. This method determines that if the main subfile has no symbols but there exists another subfile with the same basename (e.g. "test.c") that does have symbols, it's probably because there was some filename mismatch. So it replaces the main subfile with that other subfile. I think that heuristic is useful as a last effort to work around any bug or bad debug info, but I don't think we should design things such as to rely on it. It's a heuristic, it can get things wrong. So in my search for a fix, it is important that given some good debug info, we don't end up relying on that for things to work. A first attempt at fixing this was to try to prepend the compilation directory here or not prepend it there. In practice, because of all the possible combinations of debug info the compilers produce, it was not possible to get something that would produce reliable, consistent paths. Another attempt at fixing this was to make both macro_source_file objects and symtab objects use the most complete form of path possible. That means to prepend directories at least until we get an absolute path. In theory, we should end up with the same path in all cases. This generally worked, but because it changed the symtab names, it resulted in user-visible changes (for example, paths to source files in Breakpoint hit messages becoming always absolute). I didn't find this very good, first because there is a "set filename-display" setting that lets the user control how they want the paths to be displayed, and that would suddenly make this setting completely ineffective (although even today, it is a bit dependent on the debug info). Second, it would require a good amount of testsuite tweaks to make tests accept these suddenly absolute paths. This new patch is a slight variation of that: it adds a new field called "filename_for_id" in struct symtab and struct subfile, next to the existing filename field. The goal is to separate the internal ids used for finding objects from the names used for presentation. This field is used for identifying subfiles, symtabs and macro_source_files internally. For DWARF symtabs, this new field is meant to contain the "most complete possible" path, as discussed above. So for a given file, it must always be in the same form, everywhere. The existing symtab::filename field remains the one used for printing to the user, so there shouldn't be any change in how paths are printed. Changes in the core symtab files are: - Add "name_for_id" and "filename_for_id" fields to "struct subfile" and "struct symtab", next to existing "name" and "filename" fields. - Make buildsym_compunit::buildsym_compunit and buildsym_compunit::start_subfile accept a "name_for_id" parameter next to the existing "name" ones. - Make buildsym_compunit::start_subfile use "name_for_id" for looking up existing subfiles. This is the key thing for making calls to start_subfile for the main source file look up the existing subfile successfully, and avoid relying on watch_main_source_file_lossage. - Make sal_macro_scope pass "filename_for_id", rather than "filename", to macro_lookup_inclusion. This is the key thing to making the lookup work and macro printing work. Changes in the DWARF files are: - Make line_header::file_file_name return the "most complete possible" name. The only pre-existing user of this method is the macro code, to give the macro_source_file objects their name. And we now want them to have this "most complete possible" name, which will match the corresponding symtab's "filename_for_id". - Make dwarf2_cu::start_compunit_symtab pass the "most complete possible" name for the main symtab's "filename_for_id". In this context, where the info comes from the compilation unit's DW_AT_name / DW_AT_comp_dir, it means prepending DW_AT_comp_dir to DW_AT_name if DW_AT_name is not already absolute. - Change dwarf2_start_subfile to build a name_for_id for the subfile being started. The simplest way is to re-use line_header::file_file_name, since the callers always have a file_entry handy. This ensures that it will get the exact same path representation as the macro code does, for the same file (since it also uses line_header::file_file_name). - Update calls to allocate_symtab to pass the "name_for_id" from the subfile. Tests exercising all this are added by the following patch. Of all the cases I tried, the only one I found that ends up relying on watch_main_source_file_lossage is the following one: $ clang --version clang version 13.0.1 Target: x86_64-pc-linux-gnu Thread model: posix InstalledDir: /usr/bin $ clang ./test.c -g3 -O0 -gdwarf-4 $ ./gdb -nx --data-directory=data-directory -q -readnow -iex "set debug symtab-create 1" a.out ... [symtab-create] start_subfile: name = test.c, name_for_id = /home/simark/build/binutils-gdb-one-target/gdb/test.c [symtab-create] start_subfile: name = ./test.c, name_for_id = /home/simark/build/binutils-gdb-one-target/gdb/./test.c [symtab-create] start_subfile: name = ./test.c, name_for_id = /home/simark/build/binutils-gdb-one-target/gdb/./test.c [symtab-create] start_subfile: found existing symtab with name_for_id /home/simark/build/binutils-gdb-one-target/gdb/./test.c (/home/simark/build/binutils-gdb-one-target/gdb/./test.c) [symtab-create] watch_main_source_file_lossage: using subfile ./test.c as the main subfile As we can see, there are two forms used for "test.c", one with a "." and one without. This comes from the fact that the compilation unit DIE contains: DW_AT_name ("test.c") DW_AT_comp_dir ("/home/simark/build/binutils-gdb-one-target/gdb") without a ".", and the line table for that file contains: include_directories[ 1] = "." file_names[ 1]: name: "test.c" dir_index: 1 When assembling the filename from that entry, we get a ".". It is a bit unexpected that the main filename resulting from the line table header does not match exactly the name in the compilation unit. For instance, gcc uses "./test.c" for the DW_AT_name, which gives identical paths in the compilation unit and in the line table header. Similarly, with DWARF 5: $ clang ./test.c -g3 -O0 -gdwarf-5 clang create two entries that refer to the same file but are of in a different form. include_directories[ 0] = "/home/simark/build/binutils-gdb-one-target/gdb" include_directories[ 1] = "." file_names[ 0]: name: "test.c" dir_index: 0 file_names[ 1]: name: "test.c" dir_index: 1 The first file name produces a path without a "." while the second does. This is not caught by watch_main_source_file_lossage, because of dwarf_decode_lines that creates a symtab for each file entry in the line table. It therefore appears as "non-empty" to watch_main_source_file_lossage. This results in two symtabs: (gdb) maintenance info symtabs { objfile /home/simark/build/binutils-gdb-one-target/gdb/a.out ((struct objfile *) 0x613000005d00) { ((struct compunit_symtab *) 0x62100011aca0) debugformat DWARF 5 producer clang version 13.0.1 name test.c dirname /home/simark/build/binutils-gdb-one-target/gdb blockvector ((struct blockvector *) 0x621000129ec0) user ((struct compunit_symtab *) (null)) { symtab test.c ((struct symtab *) 0x62100011ad20) fullname (null) linetable ((struct linetable *) 0x0) } { symtab ./test.c ((struct symtab *) 0x62100011ad60) fullname (null) linetable ((struct linetable *) 0x621000129ef0) } } } I am not sure what is the consequence of this, but this is also what happens before my patch, so I think its acceptable to leave it as-is. To handle these two cases nicely, I think we will need a function that removes the unnecessary "." from path names, something that can be done later. Finally, I made a change in find_file_and_directory is necessary to avoid breaking test gdb.dwarf2/dw2-compdir-oldgcc.exp: info source gcc42 Without that change, we would get: (gdb) info source Current source file is /dir/d/dw2-compdir-oldgcc42.S Compilation directory is /dir/d whereas the expected result is: (gdb) info source Current source file is dw2-compdir-oldgcc42.S Compilation directory is /dir/d This test was added here: https://sourceware.org/pipermail/gdb-patches/2012-November/098144.html Long story short, GCC <= 4.2 apparently had a bug where it would generate a DW_AT_name with a full path ("/dir/d/dw2-compdir-oldgcc42.S") and no DW_AT_comp_dir. The line table has one entry with filename "dw2-compdir-oldgcc42.S", which refers to directory 0. Directory 0 normally refers to the compilation unit's comp dir, but it is non-existent in this case. This caused some symtab lookup problems, and to work around them, some workaround was added, which today reads as: if (res.get_comp_dir () == nullptr && producer_is_gcc_lt_4_3 (cu) && res.get_name () != nullptr && IS_ABSOLUTE_PATH (res.get_name ())) res.set_comp_dir (ldirname (res.get_name ())); Source: https://gitlab.com/gnutools/binutils-gdb/-/blob/6577f365ebdee7dda71cb996efa29d3714cbccd0/gdb/dwarf2/read.c#L9428-9432 It extracts an artificial DW_AT_comp_dir from DW_AT_name, if there is no DW_AT_comp_dir and DW_AT_name is absolute. Prior to my patch, a subfile would get created with filename "/dir/d/dw2-compdir-oldgcc42.S", from DW_AT_name, and another would get created with filename "dw2-compdir-oldgcc42.S" from the line table's file table. Then watch_main_source_file_lossage would kick in and merge them, keeping only the "dw2-compdir-oldgcc42.S" one: [symtab-create] start_subfile: name = /dir/d/dw2-compdir-oldgcc42.S [symtab-create] start_subfile: name = dw2-compdir-oldgcc42.S [symtab-create] start_subfile: name = dw2-compdir-oldgcc42.S [symtab-create] start_subfile: found existing symtab with name dw2-compdir-oldgcc42.S (dw2-compdir-oldgcc42.S) [symtab-create] watch_main_source_file_lossage: using subfile dw2-compdir-oldgcc42.S as the main subfile And so "info source" would show "dw2-compdir-oldgcc42.S" as the filename. With my patch applied, but without the change in find_file_and_directory, both DW_AT_name and the line table would try to start a subfile with the same filename_for_id, and there was no need for watch_main_source_file_lossage - which is what we want: [symtab-create] start_subfile: name = /dir/d/dw2-compdir-oldgcc42.S, name_for_id = /dir/d/dw2-compdir-oldgcc42.S [symtab-create] start_subfile: name = dw2-compdir-oldgcc42.S, name_for_id = /dir/d/dw2-compdir-oldgcc42.S [symtab-create] start_subfile: found existing symtab with name_for_id /dir/d/dw2-compdir-oldgcc42.S (/dir/d/dw2-compdir-oldgcc42.S) [symtab-create] start_subfile: name = dw2-compdir-oldgcc42.S, name_for_id = /dir/d/dw2-compdir-oldgcc42.S [symtab-create] start_subfile: found existing symtab with name_for_id /dir/d/dw2-compdir-oldgcc42.S (/dir/d/dw2-compdir-oldgcc42.S) But since the one with name == "/dir/d/dw2-compdir-oldgcc42.S", coming from DW_AT_name, gets created first, it wins, and the symtab ends up with "/dir/d/dw2-compdir-oldgcc42.S" as the name, "info source" shows "/dir/d/dw2-compdir-oldgcc42.S" and the test breaks. This is not wrong per-se, after all DW_AT_name is "/dir/d/dw2-compdir-oldgcc42.S", so it wouldn't be wrong to report the current source file as "/dir/d/dw2-compdir-oldgcc42.S". If you compile a file passing "/an/absolute/path.c", DW_AT_name typically contains (at least with GCC) "/an/absolute/path.c" and GDB tells you that the source file is "/an/absolute/path.c". But we can also keep the existing behavior fairly easily with a little change in find_file_and_directory. When extracting an artificial DW_AT_comp_dir from DW_AT_name, we now modify the name to just keep the file part. The result is coherent with what compilers do when you compile a file by just passing its filename ("gcc path.c -g"): DW_AT_name ("path.c") DW_AT_comp_dir ("/home/simark/build/binutils-gdb-one-target/gdb") With this change, filename_for_id is still the full name, "/dir/d/dw2-compdir-oldgcc42.S", but the filename of the subfile / symtab (what ends up shown by "info source") is just "dw2-compdir-oldgcc42.S", and that makes the test happy. Change-Id: I8b5cc4bb3052afdb172ee815c051187290566307 2022-07-30 Simon Marchi gdb/dwarf: pass a file_entry to line_header::file_file_name In the following patch, there will be some callers of file_file_name that will already have access to the file_entry object for which they want the file name. It would be inefficient to have them pass an index, only for line_header::file_file_name to re-lookup the same file_entry object. Change line_header::file_file_name to accept a file_entry object reference, instead of an index to look up. I think this change makes sense in any case. Callers that have an index can first obtain a file_entry using line_header::file_name_at or line_header::file_names. When passing a file_entry object, we can assume that the file_entry's index is valid, unlike when passing an index. So, push the special case about an invalid index to the sole current caller of file_file_name, macro_start_file. I think that error belongs there anyway, since it specifically talks about "bad file number in macro information". This requires recording the file index in the file_entry structure, so add that. Change-Id: Ic6e44c407539d92b7863d7ba82405ade17f384ad 2022-07-30 Simon Marchi gdb/dwarf: pass compilation directory to line header The following patch changes line_header::file_file_name to prepend the compilation directory to the file name, if needed. For that, the line header needs to know about the compilation directory. Prepare for that by adding a constructor that takes it as a parameter, and passing the value down everywhere needed. Add a second constructor for the special case of building a line_header for doing a hash table lookup, since that case doesn't require a compilation directory value. Change-Id: Iba3ba0293e4e2d13a64b257cf9a3094684d54330 2022-07-30 Simon Marchi gdb: add debug prints in buildsym.c Add a few debug prints in buildsym.c that were helpful to me in writing this series. Change-Id: If10a818feaee3ce1b78a2a254013b62dd578002b 2022-07-30 Simon Marchi gdb: introduce symtab_create_debug_printf Introduce symtab_create_debug_printf and symtab_create_debug_printf_v, to print the debug messages enabled by "set debug symtab-create". Change-Id: I442500903f72d4635c2dd9eaef770111f317dc04 2022-07-30 GDB Administrator Automatic date update in version.in 2022-07-29 Tom de Vries [gdb/testsuite] Fix gdb.ada/convvar_comp.exp with broken debug info On aarch64-linux I run into this failure with gcc 7.5.0: ... (gdb) print $item.started^M $1 = (-5312, 65535, 4202476)^M (gdb) FAIL: gdb.ada/convvar_comp.exp: print $item.started ... The test-case expects (0, 0, 0), but we're getting another value due to incorrect location information. Work around this by: - first printing the value, and then - verifying that the convenience variable matches the printed value. I've verified that the test-case still checks what it should by disabling the fix from commit cc0e770c0d0 ("memory error printing component of record from convenience variable") and observing the test-case fail. Tested on x86_64-linux and aarch64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29420 2022-07-29 Alan Modra Re: PR16005, avr linker crash on a particular instruction sequence with --relax The last patch wasn't so clever. The contents in fact have already been read, just not cached where relax_delete_bytes expects them. relax_delete_bytes also modifies relocs and syms, so they should be cached too. PR 16005 * elf32-avr.c (elf32_avr_relax_delete_bytes): Revert last change. (elf32_avr_relax_section): Cache contents, relocs and syms before calling relax_delete_bytes. 2022-07-29 Andrew Burgess libopcodes/aarch64: add support for disassembler styling This commit enables disassembler styling for AArch64. After this commit it is possible to have objdump style AArch64 disassembler output (using --disassembler-color option). Once the required GDB patches are merged, GDB will also style the disassembler output. The changes to support styling are mostly split between two files opcodes/aarch64-dis.c and opcodes/aarch64-opc.c. The entry point for the AArch64 disassembler can be found in aarch64-dis.c, this file handles printing the instruction mnemonics, and assembler directives (e.g. '.byte', '.word', etc). Some operands, mostly relating to assembler directives are also printed from this file. This commit changes all of this to pass through suitable styling information. However, for most "normal" instructions, the instruction operands are printed using a two step process. From aarch64-dis.c, in the print_operands function, the function aarch64_print_operand is called, this function is in aarch64-opc.c, and converts an instruction operand into a string. Then, back in print_operands (aarch64-dis.c), the operand string is printed. Unfortunately, the string returned by aarch64_print_operand can be quite complex, it will include syntax elements, like '[' and ']', in addition to register names and immediate values. In some cases, a single operand will expand into what will appear (to the user) as multiple operands separated with a ','. This makes the task of styling more complex, all these different components need to by styled differently, so we need to get the styling information out of aarch64_print_operand in some way. The solution that I propose here is similar to the solution that I used for the i386 disassembler. Currently, aarch64_print_operand uses snprintf to write the operand text into a buffer provided by the caller. What I propose is that we pass an extra argument to the aarch64_print_operand function, this argument will be a structure, the structure contains a callback function and some state. When aarch64_print_operand needs to format part of its output this can be done by using the callback function within the new structure, this callback returns a string with special embedded markers that indicate which mode should be used for each piece of text. Back in aarch64-dis.c we can spot these special style markers and use this to split the disassembler output up and apply the correct style to each piece. To make aarch64-opc.c clearer a series of new static functions have been added, e.g. 'style_reg', 'style_imm', etc. Each of these functions formats a piece of text in a different style, 'register' and 'immediate' in this case. Here's an example taken from aarch64-opc.c of the new functions in use: snprintf (buf, size, "[%s, %s]!", style_reg (styler, base), style_imm (styler, "#%d", opnd->addr.offset.imm)); The aarch64_print_operand function is also called from the assembler to aid in printing diagnostic messages. Right now I have no plans to add styling to the assembler output, and so, the callback function used in the assembler ignores the styling information and just returns an plain string. I've used the source files in gas/testsuite/gas/aarch64/ for testing, and have manually gone through and checked that the styling looks reasonable, however, I'm not an AArch64 expert, so it is possible that the odd piece is styled incorrectly. Please point out any mistakes I've made. With objdump disassembler color turned off, there should be no change in the output after this commit. 2022-07-29 Nick Clifton Stop the linker from complaining about unrecognised DW_FORM-rnglistx and DW_FORM_loclistx format attributes. PR 29424 * dwarf2.c (read_attribute_value): Handle DW_FORM_rnglistx and DW_FORM_loclistx. 2022-07-29 Alan Modra PR16005, avr linker crash on a particular instruction sequence with --relax It's possible for relax_delete_bytes to be called with section contents NULL, as demonstrated by the testcase in this PR. PR 16005 * elf32-avr.c (elf32_avr_relax_delete_bytes): Get section contents if not already available. 2022-07-29 Jan Beulich x86: drop stray NoRex64 from KeyLocker insns It's entirely unclear why some of the KeyLocker insns had NoRex64 on them - there's nothing here which could cause emission of REX.W (except of course a user-specified "rex.w", which we ought to honor anyway). 2022-07-29 Jan Beulich Arm64: re-work PR gas/27217 fix The original approach has resulted in anomalies when . is involved in an operand of one of the affected insns. We cannot leave . unresolved, or else it'll be resolved at the end of assembly, then pointing to the address of a section rather than at the insn of interest. Undo part of the original change and instead check whether a relocation cannot be omitted in md_apply_fix(). By resolving the expressions again, equates (see the adjustment of the respective testcase) will now be evaluated, and hence relocations against absolute addresses be emitted. This ought to be okay as long as the equates aren't global (and hence can't be overridden). If a need for such arises, quite likely the only way to address this would be to invent yet another expression evaluation mode, leaving everything _except_ . un-evaluated. There's a further anomaly in how transitive equates are handled. In .set x, 0x12345678 .eqv bar, x foo: adrp x0, x add x0, x0, :lo12:x adrp x0, bar add x0, x0, :lo12:bar the first two relocations are now against *ABS*:0x12345678 (as said above), whereas the latter two relocations would be against x. (Before the change here, the first two relocations are against x and the latter two against bar.) But this is an issue seen elsewhere as well, and would likely require adjustments in the target-independent parts of the assembler instead of trying to hack around this for every target. 2022-07-29 Rainer Orth ld: Extend ac_default_ld_warn_rwx_segments to all SPARC targets [PR29411] As discussed in PR ld/29411, the ld warning [...] has a LOAD segment with RWX permissions needs to be disabled on all SPARC targets, not just Solaris/SPARC: the .plt section is required to be RWX by the 32-bit SPARC ELF psABI and the 64-bit SPARC Compliance Definition 2.4.1. Given that ld only supports SPARC ELF targets, this patch implements this. Tested on sparc64-unknown-linux-gnu and sparc-sun-solaris2.11. 2022-07-28 Rainer Orth ld: PR ld/29411 * configure.tgt (ac_default_ld_warn_rwx_segments): Extend to all sparc targets. Expand comment. 2022-07-29 Tom de Vries [gdb/testsuite] Fix gdb.threads/killed-outside.exp on aarch64 On aarch64 (and likewise on arm), I run into: ... (gdb) PASS: gdb.threads/killed-outside.exp: get pid of inferior Executing on target: kill -9 11516 (timeout = 300) builtin_spawn -ignore SIGHUP kill -9 11516^M continue^M Continuing.^M Unable to fetch general registers: No such process.^M (gdb) [Thread 0xfffff7d511e0 (LWP 11518) exited]^M ^M Program terminated with signal SIGKILL, Killed.^M The program no longer exists.^M FAIL: gdb.threads/killed-outside.exp: prompt after first continue (timeout) ... due to a mismatch between the actual "No such process" line and the expected one: ... set no_such_process_msg "Couldn't get registers: No such process\." ... Fix this by updating the regexp. Tested on aarch64-linux, and x86_64-linux. 2022-07-29 Tsukasa OI RISC-V: Add `OP_V' to .insn named opcodes This commit adds `OP_V' (OP-V: vector instruction opcode for now ratified `V' extension) to .insn opcode name list. Although vector instruction encoding is not implemented in `.insn' directive, it will help future implementation of custom vector `.insn'. gas/ChangeLog: * config/tc-riscv.c (opcode_name_list): Add `OP_V'. * testsuite/gas/riscv/insn.s: Add testcase. * testsuite/gas/riscv/insn.d: Likewise. * testsuite/gas/riscv/insn-dwarf.d: Reflect insn.s update. 2022-07-29 GDB Administrator Automatic date update in version.in 2022-07-28 Tom Tromey Remove some unneeded checks in Guile code The Guile code generally checks to see if an htab is non-null before destroying it. However, the registry code already ensures this, so we can change these checks to asserts and simplify the code a little. Change registry to use less memory The registry code creates "registry_data" objects that hold the free function and the index; then the registry keys refer to this object. However, only the index is really useful, and now that registries have a private implementation, just the index can be stored and we can reduce the memory use of registries a little bit. This also simplifies the code somewhat. 2022-07-28 Tom Tromey Rewrite registry.h This rewrites registry.h, removing all the macros and replacing it with relatively ordinary template classes. The result is less code than the previous setup. It replaces large macros with a relatively straightforward C++ class, and now manages its own cleanup. The existing type-safe "key" class is replaced with the equivalent template class. This approach ended up requiring relatively few changes to the users of the registry code in gdb -- code using the key system just required a small change to the key's declaration. All existing users of the old C-like API are now converted to use the type-safe API. This mostly involved changing explicit deletion functions to be an operator() in a deleter class. The old "save/free" two-phase process is removed, and replaced with a single "free" phase. No existing code used both phases. The old "free" callbacks took a parameter for the enclosing container object. However, this wasn't truly needed and is removed here as well. 2022-07-28 Tom Tromey Remove some unused functions from guile code The guile code has a couple of unused functions that touch on the registry API. This patch removes them. 2022-07-28 Tom Tromey Change allocation of type-copying hash table When an objfile is destroyed, types that are still in use and allocated on that objfile are copied. A temporary hash map is created during this process, and it is allocated on the destroyed objfile's obstack -- which normally is fine, as that is going to be destroyed shortly anyway. However, this approach requires that the objfile be passed to registry destruction, and this won't be possible in the rewritten registry. This patch changes the copied type hash table to simply use the heap instead. It also removes the 'objfile' parameter from copy_type_recursive, to make this all more clear. This patch also fixes an apparent bug in copy_type_recursive. Previously it was copying the dynamic property list to the dying objfile's obstack: - = copy_dynamic_prop_list (&objfile->objfile_obstack, However I think this is incorrect -- that obstack is about to be destroyed. 2022-07-28 Tom Tromey Change address_space to use new and delete This changes address_space to use new and delete, and makes some other small C++-ification changes as well, like changing address_space_num to be a method. This patch was needed for the subsequent patch to rewrite the registry system. 2022-07-28 Simon Farre gdb/python: Add BreakpointLocation type PR python/18385 v7: This version addresses the issues pointed out by Tom. Added nullchecks for Python object creations. Changed from using PyLong_FromLong to the gdb_py-versions. Re-factored some code to make it look more cohesive. Also added the more safe Python reference count decrement PY_XDECREF, even though the BreakpointLocation type is never instantiated by the user (explicitly documented in the docs) decrementing < 0 is made impossible with the safe call. Tom pointed out that using the policy class explicitly to decrement a reference counted object was not the way to go, so this has instead been wrapped in a ref_ptr that handles that for us in blocpy_dealloc. Moved macro from py-internal to py-breakpoint.c. Renamed section at the bottom of commit message "Patch Description". v6: This version addresses the points Pedro gave in review to this patch. Added the attributes `function`, `fullname` and `thread_groups` as per request by Pedro with the argument that it more resembles the output of the MI-command "-break-list". Added documentation for these attributes. Cleaned up left overs from copy+paste in test suite, removed hard coding of line numbers where possible. Refactored some code to use more c++-y style range for loops wrt to breakpoint locations. Changed terminology, naming was very inconsistent. Used a variety of "parent", "owner". Now "owner" is the only term used, and the field in the gdb_breakpoint_location_object now also called "owner". v5: Changes in response to review by Tom Tromey: - Replaced manual INCREF/DECREF calls with gdbpy_ref ptrs in places where possible. - Fixed non-gdb style conforming formatting - Get parent of bploc increases ref count of parent. - moved bploc Python definition to py-breakpoint.c The INCREF of self in bppy_get_locations is due to the individual locations holding a reference to it's owner. This is decremented at de-alloc time. The reason why this needs to be here is, if the user writes for instance; py loc = gdb.breakpoints()[X].locations[Y] The breakpoint owner object is immediately going out of scope (GC'd/dealloced), and the location object requires it to be alive for as long as it is alive. Thanks for your review, Tom! v4: Fixed remaining doc issues as per request by Eli. v3: Rewritten commit message, shortened + reworded, added tests. Patch Description Currently, the Python API lacks the ability to query breakpoints for their installed locations, and subsequently, can't query any information about them, or enable/disable individual locations. This patch solves this by adding Python type gdb.BreakpointLocation. The type is never instantiated by the user of the Python API directly, but is produced by the gdb.Breakpoint.locations attribute returning a list of gdb.BreakpointLocation. gdb.Breakpoint.locations: The attribute for retrieving the currently installed breakpoint locations for gdb.Breakpoint. Matches behavior of the "info breakpoints" command in that it only returns the last known or currently inserted breakpoint locations. BreakpointLocation contains 7 attributes 6 read-only attributes: owner: location owner's Python companion object source: file path and line number tuple: (string, long) / None address: installed address of the location function: function name where location was set fullname: fullname where location was set thread_groups: thread groups (inferiors) where location was set. 1 writeable attribute: enabled: get/set enable/disable this location (bool) Access/calls to these, can all throw Python exceptions (documented in the online documentation), and that's due to the nature of how breakpoint locations can be invalidated "behind the scenes", either by them being removed from the original breakpoint or changed, like for instance when a new symbol file is loaded, at which point all breakpoint locations are re-created by GDB. Therefore this patch has chosen to be non-intrusive: it's up to the Python user to re-request the locations if they become invalid. Also there's event handlers that handle new object files etc, if a Python user is storing breakpoint locations in some larger state they've built up, refreshing the locations is easy and it only comes with runtime overhead when the Python user wants to use them. gdb.BreakpointLocation Python type struct "gdbpy_breakpoint_location_object" is found in python-internal.h Its definition, layout, methods and functions are found in the same file as gdb.Breakpoint (py-breakpoint.c) 1 change was also made to breakpoint.h/c to make it possible to enable and disable a bp_location* specifically, without having its LOC_NUM, as this number also can change arbitrarily behind the scenes. Updated docs & news file as per request. Testsuite: tests the .source attribute and the disabling of individual locations. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=18385 Change-Id: I302c1c50a557ad59d5d18c88ca19014731d736b0 2022-07-28 yaowenbin gdb/gdb_mbuild.sh: use return instead of continue to avoid shellcheck error Fix: In gdb_mbuild.sh line 174: continue ^------^ SC2104 (error): In functions, use return instead of continue. Change-Id: I5ce95b01359c5cfbb1612f2f48b80bfeea66c96c 2022-07-28 GDB Administrator Automatic date update in version.in 2022-07-27 GDB Administrator Automatic date update in version.in 2022-07-27 Vladimir Mezentsev gprofng: check for the makeinfo version gprofng/ChangeLog 2022-07-25 Vladimir Mezentsev PR gprofng/29368 * configure.ac: Check for the makeinfo version. * configure: Rebuild. 2022-07-26 Keith Seitz gdb/linux_nat: Write memory using ptrace if /proc/pid/mem is not writable Commit 05c06f318fd9a112529dfc313e6512b399a645e4 enabled GDB to access memory while threads are running. It did this by accessing /proc/PID/task/LWP/mem. Unfortunately, this interface is not implemented for writing in older kernels (such as RHEL6). This means that GDB is unable to insert breakpoints on these hosts: $ ./gdb -q gdb -ex start Reading symbols from gdb... Temporary breakpoint 1 at 0x40fdd5: file ../../src/gdb/gdb.c, line 28. Starting program: /home/rhel6/fsf/linux/gdb/gdb Warning: Cannot insert breakpoint 1. Cannot access memory at address 0x40fdd5 (gdb) Before this patch, linux_proc_xfer_memory_partial (previously called linux_proc_xfer_partial) would return TARGET_XFER_EOF if the write to /proc/PID/mem failed. [More specifically, linux_proc_xfer_partial would not "bother for one word," but the effect is the essentially same.] This status was checked by linux_nat_target::xfer_partial, which would then fallback to using ptrace to perform the operation. This is the specific hunk that removed the fallback: - xfer = linux_proc_xfer_partial (object, annex, readbuf, writebuf, - offset, len, xfered_len); - if (xfer != TARGET_XFER_EOF) - return xfer; + return linux_proc_xfer_memory_partial (readbuf, writebuf, + offset, len, xfered_len); + } return inf_ptrace_target::xfer_partial (object, annex, readbuf, writebuf, offset, len, xfered_len); This patch makes linux_nat_target::xfer_partial go straight to writing memory via ptrace if writing via /proc/pid/mem is not possible in the running kernel, enabling GDB to insert breakpoints on these older kernels. Note that a recent patch changed the return status from TARGET_XFER_EOF to TARGET_XFER_E_IO. Tested on {unix,native-gdbserver,native-extended-gdbserver}/-m{32,64} on x86_64, s390x, aarch64, and ppc64le. Change-Id: If1d884278e8c4ea71d8836bedd56e6a6c242a415 2022-07-26 Pedro Alves gdb/linux-nat: Check whether /proc/pid/mem is writable Probe whether /proc/pid/mem is writable, by using it to write to a GDB variable. This will be used in the following patch to avoid falling back to writing to inferior memory with ptrace if /proc/pid/mem _is_ writable. Change-Id: If87eff0b46cbe5e32a583e2977a9e17d29d0ed3e 2022-07-26 Tiezhu Yang gdb: LoongArch: Handle the function return value According to LoongArch ELF ABI specification [1], handle the function return value of various types. [1] https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html#_return_values 2022-07-26 Tiezhu Yang gdb: LoongArch: Fix code style issues Fix some code style issues suggested by Tom Tromey and Andrew Burgess, thank you. (1) Put an introductory comment to explain the purpose for some functions. (2) Modify the the attribute code to make it portable. (3) Remove globals and pass pointers to locals. (4) Remove "*" in the subsequent comment lines. (5) Put two spaces before "{" and "}". 2022-07-26 Nick Clifton Stop the linker from complaining about RWX segments in sparc-solaris targets. PR 29411 * configure.tgt (ac_default_ld_warn_rwx_segments): Disable for sparc-solaris configurations. 2022-07-26 Tom de Vries [gdb/testsuite] Fix gdb.opt/inline-small-func.exp with clang When running test-case gdb.opt/inline-small-func.exp with clang 12.0.1, I run into: ... gdb compile failed, /usr/bin/ld: inline-small-func0.o: in function `main': inline-small-func.c:21: undefined reference to `callee' clang-12.0: error: linker command failed with exit code 1 \ (use -v to see invocation) UNTESTED: gdb.opt/inline-small-func.exp: failed to prepare ... Fix this by using __attribute__((always_inline)). Tested on x86_64-linux. 2022-07-26 Alan Modra PowerPC32 ld test fails with --enable-targets=all Three pppc32 ld tests fail when spe support is included in the linker due to this snippet in ld/emulparams/elf32ppc.sh. if grep -q 'ld_elf32_spu_emulation' ldemul-list.h; then DATA_START_SYMBOLS="${RELOCATING+*crt1.o(.data .data.* .gnu.linkonce.d.*) PROVIDE (__spe_handle = .); *(.data.spehandle) . += 4 * (DEFINED (__spe_handle) || . != 0);}" fi * testsuite/ld-powerpc/tlsexe32.r: Pass with .data section present. * testsuite/ld-powerpc/tlsexe32no.r: Likewise. * testsuite/ld-powerpc/tlsso32.r: Likewise. 2022-07-26 Enze Li gdb/hurd: pass memory_tagged as false to find_memory_region_ftype I tried building GDB on GNU/Hurd, and ran into this error: CXX gnu-nat.o gnu-nat.c: In member function ‘virtual int gnu_nat_target::find_memory_regions(find_memory_region_ftype, void*)’: gnu-nat.c:2620:21: error: too few arguments to function 2620 | (*func) (last_region_address, | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ 2621 | last_region_end - last_region_address, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2622 | last_protection & VM_PROT_READ, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2623 | last_protection & VM_PROT_WRITE, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2624 | last_protection & VM_PROT_EXECUTE, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2625 | 1, /* MODIFIED is unknown, pass it as true. */ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2626 | data); | ~~~~~ gnu-nat.c:2635:13: error: too few arguments to function 2635 | (*func) (last_region_address, last_region_end - last_region_address, | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2636 | last_protection & VM_PROT_READ, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2637 | last_protection & VM_PROT_WRITE, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2638 | last_protection & VM_PROT_EXECUTE, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2639 | 1, /* MODIFIED is unknown, pass it as true. */ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2640 | data); | ~~~~~ make[2]: *** [Makefile:1926: gnu-nat.o] Error 1 This is because in this commit: commit 68cffbbd4406b4efe1aa6e18460b1d7ca02549f1 Date: Thu Mar 31 11:42:35 2022 +0100 [AArch64] MTE corefile support Added a new argument to find_memory_region_ftype, but did not pass it to the function in gnu-nat.c. Fix this by passing memory_tagged as false. As Luis pointed out, similar bugs may also appear on FreeBSD and NetBSD, and I have reproduced them on both systems. This patch fixes them incidentally. Tested by rebuilding on GNU/Hurd, FreeBSD/amd64 and NetBSD/amd64. 2022-07-26 Enze Li gdb/netbsd: add missing header file I ran into this error when building GDB on NetBSD: CXX netbsd-nat.o netbsd-nat.c: In member function 'virtual bool nbsd_nat_target::info_proc(const char*, info_proc_what)': netbsd-nat.c:314:3: error: 'gdb_argv' was not declared in this scope gdb_argv built_argv (args); ^~~~~~~~ netbsd-nat.c:314:3: note: suggested alternative: 'gdbarch' gdb_argv built_argv (args); ^~~~~~~~ gdbarch netbsd-nat.c:315:7: error: 'built_argv' was not declared in this scope if (built_argv.count () == 0) ^~~~~~~~~~ netbsd-nat.c:315:7: note: suggested alternative: 'buildargv' if (built_argv.count () == 0) ^~~~~~~~~~ buildargv gmake[2]: *** [Makefile:1893: netbsd-nat.o] Error 1 Fix this by adding the missing header file, as it is obvious. Tested by rebuilding on NetBSD/amd64. 2022-07-26 Nick Clifton Updated translations for various sub-directories 2022-07-26 Andrew Burgess gdb: rename gdbarch_tdep struct to fix g++ 4.8 build After the commit: commit 08106042d9f5fdff60c129bf33190639f1a98b2a Date: Thu May 19 13:20:17 2022 +0100 gdb: move the type cast into gdbarch_tdep GDB would no longer build using g++ 4.8. The issue appears to be some confusion caused by GDB having 'struct gdbarch_tdep', but also a templated function called 'gdbarch_tdep'. Prior to the above commit the gdbarch_tdep function was not templated, and this compiled just fine. Note that the above commit compiles just fine with later versions of g++, so this issue was clearly fixed at some point, though I've not tried to track down exactly when. In this commit I propose to fix the g++ 4.8 build problem by renaming 'struct gdbarch_tdep' to 'struct gdbarch_tdep_base'. This rename better represents that the struct is only ever used as a base class, and removes the overloading of the name, which allows GDB to build with g++ 4.8. I've also updated the comment on 'struct gdbarch_tdep_base' to fix a typo, and the comment on the 'gdbarch_tdep' function, to mention that in maintainer mode a run-time type check is performed. 2022-07-26 Nick Clifton Fix indentation in loongarch code, preventing a compile time warning. 2022-07-26 Lancelot SIX gdb/varobj: Fix varobj_invalidate_iter The varobj_invalidate function is meant to be called when restarting a process, and check at this point if some of the previously existing varobj can be recreated in the context of the new process. Two kind of varobj are subject to re-creation: global varobj (i.e. varobj which reference a global variable), and floating varobj (i.e. varobj which are always re-evaluated in the context of whatever is the currently selected frame at the time of evaluation). However, in the re-creation process, the varobj_invalidate_iter recreates floating varobj as non-floating, due to an invalid parameter. This patches fixes this and adds an assertion to check that if a varobj is indeed recreated, it matches the original varobj "floating" property. Another issue is that if at this recreation time the expression watched by the floating varobj is not in scope, then the varobj is marked as invalid. If later the user selects a frame where the expression becomes valid, the varobj remains invalid and this is wrong. This patch also make sure that floating varobj are not invalidated if they cannot be evaluated. The last important thing to note is that due to the previous patch, when varobj_invalidate is executed (in the context of a new process), any global var have already been invalidated (this has been done when the objfile it referred to got invalidated). As a consequence, varobj_invalidate tries to recreate vars which are already marked as invalid. This does not entirely feels right, but I keep this behavior for backward compatibility. Tested on x86_64-linux 2022-07-26 Lancelot SIX gdb/varobj: Fix use after free in varobj Varobj object contains references to types, variables (i.e. struct variable) and expression. All of those can reference data on an objfile's obstack. It is possible for this objfile to be deleted (and the obstack to be feed), while the varobj remains valid. Later, if the user uses the varobj, this will result in a use-after-free error. With address sanitizer build, this leads to a plain error. For non address sanitizer build we might see undefined behaviour, which manifest themself as assertion failures when accessing data backed by feed memory. This can be observed if we create a varobj that refers to ta symbol in a shared library, after either the objfile gets reloaded (using the `file` command) or after the shared library is unloaded (with a call to dlclose for example). This patch fixes those issues by: - Adding cleanup procedure to the free_objfile observable. When activated this observer clears expressions referencing the objfile being freed, and removes references to blocks belonging to this objfile. - Adding varobj support in the `preserve_values` (gdb.value.c). This ensures that before the objfile is unloaded, any type owned by the objfile referenced by the varobj is replaced by an equivalent type not owned by the objfile. This process is done here instead of in the free_objfile observer in order to reuse the type hash table already used for similar purpose when replacing types of values kept in the value history. This patch also makes sure to keep a reference to the expression's gdbarch and language_defn members when the varobj->root->exp is initialized. Those structures outlive the objfile, so this is safe. This is done because those references might be used initialize a python context even after exp is invalidated. Another approach could have been to initialize the python context with default gdbarch and language_defn (i.e. nullptr) if expr is NULL, but since we might still try to display the value which was obtained by evaluating exp when it was still valid, keeping track of the context which was used at this time seems reasonable. Tested on x86_64-Linux. Co-Authored-By: Pedro Alves 2022-07-26 Pedro Alves MI: mi_runto -pending With the CLI testsuite's runto proc, we can pass "allow-pending" as an option, like: runto func allow-pending That is currently not possible with MI's mi_runto, however. This patch makes it possible, by adding a new "-pending" option to mi_runto. A pending breakpoint shows different MI attributes compared to a breakpoint with a location, so the regexp returned by mi_make_breakpoint isn't suitable. Thus, add a new mi_make_breakpoint_pending proc for pending breakpoints. Tweak mi_runto to let it take and pass down arguments. Change-Id: I185fef00ab545a1df2ce12b4dbc3da908783a37c 2022-07-26 GDB Administrator Automatic date update in version.in 2022-07-25 Ruud van der Pas gprofng: fix bug 29356 - Execution fails if gprofng is not included in PATH gprofng/Changelog: 2022-07-22 Ruud van der Pas PR gprofng/29356 * gp-display-html/gp-display-html.in: fixed a problem to execute gp-display-text in case gprofng is not included in the search path. 2022-07-25 Ruud van der Pas gprofng: fix bug 29392 - Unexpected line format in summary file gprofng/Changelog: 2022-07-22 Ruud van der Pas PR gprofng/29392 * gp-display-html/gp-display-html.in: modified a regex, plus the code to handle the results; renamed a variable to improve the consistency in naming. 2022-07-25 Ruud van der Pas gprofng: fix bug 29353 - Fix a lay-out issue in the html disassembly files gprofng/Changelog: 2022-07-22 Ruud van der Pas PR gprofng/29353 * gp-display-html/gp-display-html.in: fixed a problem in the generation of html for the disassembly where instructions without arguments were not handled correctly. 2022-07-25 Ruud van der Pas gprofng: fix bug 29352 - Fix the message Hexadecimal number > 0xffffffff non-portable gprofng/Changelog: 2022-07-22 Ruud van der Pas PR gprofng/29352 * gp-display-html/gp-display-html.in: the hex subroutine from the bigint module is now used. 2022-07-25 Ruud van der Pas gprofng: fix bug 29351 - Move dynamic loading of modules to a later stage gprofng/Changelog: 2022-07-22 Ruud van der Pas PR gprofng/29351 * gp-display-html/gp-display-html.in: the dynamic loading of modules occurred too early, resulting in the generation of the man page to fail in case a module is missing; the loading part is now done somewhat later in the execution to avoid this problem. 2022-07-25 Kevin Buettner set/show python dont-write-bytecode fixes GDB uses the environment variable PYTHONDONTWRITEBYTECODE to determine whether or not to write the result of byte-compiling python modules when the "python dont-write-bytecode" setting is "auto". Simon noticed that GDB's implementation doesn't follow the Python documentation. At present, GDB only checks for the existence of this environment variable. That is not sufficient though. Regarding PYTHONDONTWRITEBYTECODE, this document... https://docs.python.org/3/using/cmdline.html ...says: If this is set to a non-empty string, Python won't try to write .pyc files on the import of source modules. This commit fixes GDB's handling of PYTHONDONTWRITEBYTECODE by adding an empty string check. This commit also corrects the set/show command documentation for "python dont-write-bytecode". The current doc was just a copy of that for set/show python ignore-environment. During his review of an earlier version of this patch, Eli Zaretskii asked that the help text that I proposed for "set/show python dont-write-bytecode" be expanded. I've done that in addition to clarifying the documentation of this option in the GDB manual. 2022-07-25 Andrew Burgess gdb/python: fix invalid use disassemble_info::stream After this commit: commit 81384924cdcc9eb2676dd9084b76845d7d0e0759 Date: Tue Apr 5 11:06:16 2022 +0100 gdb: have gdb_disassemble_info carry 'this' in its stream pointer The disassemble_info::stream field will no longer be a ui_file*. That commit failed to update one location in py-disasm.c though. While running some tests using the Python disassembler API, I triggered a call to gdbpy_disassembler::print_address_func, and, as I had compiled GDB with the undefined behaviour sanitizer, GDB crashed as the code currently (incorrectly) casts the stream field to be a ui_file*. In this commit I fix this error. In order to test this case I had to tweak the existing test case a little. I also spotted some debug printf statements in py-disasm.py, which I have removed. 2022-07-25 Andrew Burgess gdb: fix use of uninitialised gdb_printing_disassembler::m_in_comment Simon pointed out that gdb_printing_disassembler::m_in_comment can be used uninitialised by the Python disassembler API code. This issue was spotted when GDB was built with the undefined behaviour sanitizer, and causes the gdb.python/py-disasm.exp test to fail like this: (gdb) PASS: gdb.python/py-disasm.exp: global_disassembler=GlobalPreInfoDisassembler: python add_global_disassembler(GlobalPreInfoDisassembler) disassemble main Dump of assembler code for function main: 0x0000555555555119 <+0>: push %rbp 0x000055555555511a <+1>: mov %rsp,%rbp 0x000055555555511d <+4>: nop /home/user/src/binutils-gdb/gdb/disasm.h:144:12: runtime error: load of value 118, which is not a valid value for type 'bool' The problem is that in disasmpy_builtin_disassemble we create a new instance of gdbpy_disassembler, which is a sub-class of gdb_printing_disassembler, however, the m_in_comment field is never initialised. This commit fixes the issue by providing a default initialisation value for m_in_comment in disasm.h. As we only ever disassemble a single instruction in disasmpy_builtin_disassemble then we don't need to worry about reseting m_in_comment back to false after the single instruction has been disassembled. With this commit the above issue is resolved and gdb.python/py-disasm.exp now passes. 2022-07-25 H.J. Lu ld: Compile 2 CTF tests with -O2 When GCC 12 is used to build binutils with -O0, the following 2 tests failed: FAIL: Conflicted data syms, partially indexed, stripped, with variables FAIL: Conflicted data syms, partially indexed, stripped Compile 2 tests with -O2 to avoid test failures. PR ld/29378 * testsuite/ld-ctf/data-func-conflicted-vars.d: Compile with -O2. * testsuite/ld-ctf/data-func-conflicted.d: Likewise. 2022-07-25 Pedro Alves struct packed: Add fallback byte array implementation Attribute gcc_struct is not implemented in Clang targeting Windows, so add a fallback standard-conforming implementation based on arrays. I ran the testsuite on x86_64 GNU/Linux with this implementation forced, and saw no regressions. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29373 Change-Id: I023315ee03622c59c397bf4affc0b68179c32374 2022-07-25 Pedro Alves struct packed: Unit tests and more operators For PR gdb/29373, I wrote an alternative implementation of struct packed that uses a gdb_byte array for internal representation, needed for mingw+clang. While adding that, I wrote some unit tests to make sure both implementations behave the same. While at it, I implemented all relational operators. This commit adds said unit tests and relational operators. The alternative gdb_byte array implementation will come next. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29373 Change-Id: I023315ee03622c59c397bf4affc0b68179c32374 2022-07-25 Pedro Alves struct packed: Use gcc_struct on Windows Building GDB on mingw/gcc hosts is currently broken, due to a static assertion failure in gdbsupport/packed.h: In file included from ../../../../../binutils-gdb/gdb/../gdbsupport/common-defs.h:201, from ../../../../../binutils-gdb/gdb/defs.h:28, from ../../../../../binutils-gdb/gdb/dwarf2/read.c:31: ../../../../../binutils-gdb/gdb/../gdbsupport/packed.h: In instantiation of 'packed::packed(T) [with T = dwarf_unit_type; long long unsigned int Bytes = 1]': ../../../../../binutils-gdb/gdb/dwarf2/read.h:181:74: required from here ../../../../../binutils-gdb/gdb/../gdbsupport/packed.h:41:40: error: static assertion failed 41 | gdb_static_assert (sizeof (packed) == Bytes); | ~~~~~~~~~~~~~~~~^~~~~~~~ ../../../../../binutils-gdb/gdb/../gdbsupport/gdb_assert.h:27:48: note: in definition of macro 'gdb_static_assert' 27 | #define gdb_static_assert(expr) static_assert (expr, "") | ^~~~ ../../../../../binutils-gdb/gdb/../gdbsupport/packed.h:41:40: note: the comparison reduces to '(4 == 1)' 41 | gdb_static_assert (sizeof (packed) == Bytes); | ~~~~~~~~~~~~~~~~^~~~~~~~ The issue is that mingw gcc defaults to "-mms-bitfields", which affects how bitfields are laid out. We can however tell GCC that we want the regular GCC layout instead using attribute gcc_struct. Attribute gcc_struct is not implemented in "clang -target x86_64-pc-windows-gnu", so that will need a different fix. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29373 Change-Id: I023315ee03622c59c397bf4affc0b68179c32374 2022-07-25 Andrew Burgess binutils-gdb/git: highlight whitespace errors in source files For a long time I've had this in my ~/.gitconfig: [core] whitespace = space-before-tab,indent-with-non-tab,trailing-space which causes git to show me if I muck up and use spaces instead of tabs, or leave in trailing whitespace. I find this really useful. I recently proposed adding something like this to the .gitattributes files for the GDB sub-directories (gdb, gdbsupport, and gdbserver)[1], however, the question was asked - couldn't this be done at the top level? So, in this commit, I propose to update the top-level .gitattributes file, after this commit, any git diff on a C, C++, Expect, or TCL source file, will highlight the following whitespace errors: (a) Use a space before a tab at the start of a line, (b) Use of spaces where a tab could be used at the start of a line, and (c) Any trailing whitespace. Errors are only highlighted in the diff on new or modified lines, so you don't get spammed for errors on context lines that you haven't modified. The only downside I see to adding this at the top level is if there are any sub-directories that don't follow the tabs/spaces indentation rules very well already, in those directories you'll end up hitting issues any time you edit a line. For GDB we're usually pretty good, so having this highlighting isn't an issue. [1] https://sourceware.org/pipermail/gdb-patches/2022-July/190843.html 2022-07-25 Yvan Roux gdb/arm: Sync sp with other *sp registers For Arm Cortex-M33 with security extensions, there are 4 different stack pointers (msp_s, msp_ns, psp_s, psp_ns), without security extensions and for other Cortex-M targets, there are 2 different stack pointers (msp and psp). With this patch, sp will always be in sync with one of the real stack pointers on Arm targets that contain more than one stack pointer. 2022-07-25 Torbjörn SVENSSON gdb/arm: Use if-else if instead of switch As the register numbers for the alternative Arm SP registers are not constant, it's not possible to use switch statement to define the rules. In order to not have a mix, replace the few existing switch statements with regular if-else if statements 2022-07-25 Tom Tromey Remove dead code from windows_nat_target::detach windows_nat_target::detach has a variable 'detached' that is only set after a call to 'error'. However, this can't happen because 'error' throws an exception. This patch removes the dead code. 2022-07-25 Andrew Burgess gdb: handle dis_style_sub_mnemonic disassembler style In commit: commit 4f46c0bc36471b725de0253bfec1a42a36e2c5c5 Date: Mon Jul 4 17:45:25 2022 +0100 opcodes: add new sub-mnemonic disassembler style I added a new disassembler style dis_style_sub_mnemonic, but forgot to add GDB support for this style. Fix this oversight in this commit. 2022-07-25 Andrew Burgess libopcodes/ppc: add support for disassembler styling This commit adds disassembler styling to the libopcodes ppc disassembler. This conversion was pretty straight forward, I just converted the fprintf_func calls to fprintf_styled_func calls and added an appropriate style. For testing the new styling I just assembled then disassembled the source files in gas/testsuite/gas/ppc and manually checked that the styling looked reasonable. I think the only slightly weird case was how things like '4*cr1+eq' are styled. As best I can tell, this construct, used for example in this instruction: crand 4*cr1+lt,4*cr1+gt,4*cr1+eq is used to access a field of a control register. I initially tried styling this whole construct as a register[1], but during review it was suggested that instead different parts of the text should have different styles. In this commit I propose styling '4*cr1+lt' like this: 4 - immediate, * - text, cr1 - register + - text lt - sub-mnemonic If the user does not request styled output from objdump, then there should be no change in the disassembler output after this commit. [1] https://sourceware.org/pipermail/binutils/2022-July/121771.html 2022-07-25 Andrew Burgess opcodes: add new sub-mnemonic disassembler style When adding libopcodes disassembler styling support for AArch64, it feels like the results would be improved by having a new sub-mnemonic style. This will be used in cases like: add w16, w7, w1, uxtb #2 ^^^^----- Here And: cinc w0, w1, ne ^^----- Here This commit just adds the new style, and prepares objdump to handle the style. A later commit will add AArch64 styling, and will actually make use of the style. As this style is currently unused, there should be no user visible changes after this commit. 2022-07-25 liuzhensong LoongArch: Add testcases for new relocate types. gas/testsuite/gas/all/ gas.exp gas/testsuite/gas/loongarch/ jmp_op.d jmp_op.s macro_op.d macro_op.s macro_op_32.d macro_op_32.s macro_op_large_abs.d macro_op_large_abs.s macro_op_large_pc.d macro_op_large_pc.s reloc.d reloc.s ld/testsuite/ld-elf/ pr26936.d shared.exp ld/testsuite/ld-loongarch-elf/ attr-ifunc-4.c attr-ifunc-4.out disas-jirl.d ifunc.exp jmp_op.d jmp_op.s libnopic-global.s macro_op.d macro_op.s macro_op_32.d macro_op_32.s nopic-global-so.rd nopic-global-so.sd nopic-global.out nopic-global.s nopic-global.sd nopic-global.xd nopic-local.out nopic-local.rd nopic-local.s nopic-local.sd nopic-local.xd nopic-weak-global-so.rd nopic-weak-global-so.sd nopic-weak-global.out nopic-weak-global.s nopic-weak-global.sd nopic-weak-global.xd nopic-weak-local.out nopic-weak-local.rd nopic-weak-local.s nopic-weak-local.sd nopic-weak-local.xd pic.exp pic.ld 2022-07-25 liuzhensong bfd: Delete R_LARCH_NONE from dyn info of LoongArch. Some R_LARCH_64 in section .eh_frame will to generate R_LARCH_NONE, we change relocation to R_LARCH_32_PCREL from R_LARCH_64 in setction .eh_frame and not generate dynamic relocation for R_LARCH_32_PCREL. Add New relocate type R_LARCH_32_PCREL for .eh_frame. include/elf/ loongarch.h bfd/ bfd/bfd-in2.h libbfd.h reloc.c elfxx-loongarch.c elfnn-loongarch.c gas/config/ tc-loongarch.c binutils/ readelf.c ld/testsuite/ld-elf/ eh5.d 2022-07-25 liuzhensong LoongArch: Move ifunc info to rela.dyn from rela.plt. Delete R_LARCH_IRELATIVE from dynamic loader (glibc ld.so) when loading lazy function (rela.plt section). In dynamic programes, move ifunc dynamic relocate info to section srelgot from srelplt. bfd/ elfnn-loongarch.c 2022-07-25 liuzhensong LoongArch: gas: Add new reloc types. Generate new relocate types while use new macro insns. gas/config/ loongarch-lex.h loongarch-parse.y tc-loongarch.c tc-loongarch.h 2022-07-25 liuzhensong LoongArch:opcodes: Add new reloc types. opcodes: Replace old insns with news and generate new relocate types while macro insns expanding. opcodes/ loongarch-opc.c 2022-07-25 liuzhensong bfd: Add supported for LoongArch new relocations. Define new reloc types according to linker needs. include/elf/ loongarch.h bfd/ bfd-in2.h libbfd.h reloc.c elfnn-loongarch.c elfxx-loongarch.c elfxx-loongarch.h 2022-07-25 Alan Modra Re: PowerPC64 .branch_lt address On seeing PR29369 my suspicion was naturally on a recent powerpc64 change, commit 0ab80031430e. Without a reproducer, I spent time wondering what could have gone wrong, and while I doubt this patch would have fixed the PR, there are some improvements that can be made to cater for user silliness. I also noticed that when -z relro -z now sections are created out of order, with .got before .plt in the section headers but .got is laid out at a higher address. That's due to the address expression for .branch_lt referencing SIZEOF(.got) and so calling init_os (which creates a bfd section) for .got before the .plt section is created. Fix that by ignoring SIZEOF in exp_init_os. Unlike ADDR and LOADADDR which need to reference section vma and lma respectively, SIZEOF can and does cope with a missing bfd section by returning zero for its size, which of course is correct. PR 29369 * ldlang.c (exp_init_os): Don't create a bfd section for SIZEOF. * emulparams/elf64ppc.sh (OTHER_RELRO_SECTIONS_2): Revise .branch_lt address to take into account possible user sections with alignment larger than 8 bytes. 2022-07-25 GDB Administrator Automatic date update in version.in 2022-07-24 Enze Li gdb/testsuite: add a clear test to py-breakpoint.exp This patch adds a test case to try to clear an internal python breakpoint using the clear command. This was suggested by Pedro during a code review of the following commit. commit a5c69b1e49bae4d0dcb20f324cebb310c63495c6 Date: Sun Apr 17 15:09:46 2022 +0800 gdb: fix using clear command to delete non-user breakpoints(PR cli/7161) Tested on x86_64 openSUSE Tumbleweed. 2022-07-24 Enze Li gdb/testsuite: rename get_maint_bp_addr and move it to gdb-utils.exp The get_maint_bp_addr procedure will be shared by other test suite, so move it to gdb-utils.exp. Following Andrew's suggestion, I renamed get_maint_bp_addr to gdb_get_bp_addr, since it would have handled normal breakpoints in addition to the internal ones. Note that there is still room for improvement in this procedure, which I indicated in comments nearby. 2022-07-24 GDB Administrator Automatic date update in version.in 2022-07-23 GDB Administrator Automatic date update in version.in 2022-07-22 Tom de Vries [gdb/symtab] Fix duplicate CUs in all_comp_units When running test-case gdb.cp/cpexprs-debug-types.exp with target board cc-with-debug-names on a system with gcc 12.1.1 (defaulting to dwarf 5), I run into: ... (gdb) file cpexprs-debug-types^M Reading symbols from cpexprs-debug-types...^M warning: Section .debug_aranges in cpexprs-debug-types has duplicate \ debug_info_offset 0x0, ignoring .debug_aranges.^M gdb/dwarf2/read.h:309: internal-error: set_length: \ Assertion `m_length == length' failed.^M ... The exec contains a .debug_names section, which gdb rejects due to .debug_names containing a list of TUs, while the exec doesn't contain a .debug_types section (which is what you'd expect for dwarf 4). Gdb then falls back onto the cooked index, which calls create_all_comp_units to create all_comp_units. However, the failed index reading left some elements in all_comp_units, so we end up with duplicates in all_comp_units, which causes the misleading complaint and the assert. Fix this by: - asserting at the start of create_all_comp_units that all_comp_units is empty, as we do in create_cus_from_index and create_cus_from_debug_names, and - cleaning up all_comp_units when failing in dwarf2_read_debug_names. Add a similar cleanup in dwarf2_read_gdb_index. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29381 2022-07-22 Simon Marchi gdb/testsuite: give binaries distinct names in Ada tests Some Ada tests repeat their test sequence with different gnat-encodings, typically "all" and "minimal". However, they give the same name to both binaries, meaning the second run overwrites the binary of the first run. This makes it difficult and confusing when trying to reproduce problems manually with the test artifacts. Change those tests to use unique names for each pass. Change-Id: Iaa3c9f041241249a7d67392e785c31aa189dcc88 2022-07-22 Tom Tromey Change target_ops::async to accept bool This changes the parameter of target_ops::async from int to bool. Regression tested on x86-64 Fedora 34. Fix typo in windows-nat.c I noticed a typo in a printf in windows-nat.c. This fixes it. 2022-07-22 Tom de Vries [gdb] Add empty range unit test for gdb::parallel_for_each Add a unit test that verifies that we can call gdb::parallel_for_each with an empty range. Tested on x86_64-linux. 2022-07-22 Alan Modra PR17122, OSX 10.9 build failure sbrk hasn't been used in binutils/ or ld/ for quite some time (so the PR was fixed a while ago). Tidy up configury. PR 17122 binutils/ * configure.ac: Don't check for sbrk. * sysdep.h (sbrk): Don't supply fallback declaration. * config.in: Regenerate. * configure: Regenerate. ld/ * configure.ac: Don't check for sbrk. * config.in: Regenerate. * configure: Regenerate. 2022-07-22 Jiangshuai Li gdb/csky modify registers list for general_reggroup There are two modification points here: 1. For the debugging of csky architecture, after executing "info register", we hope to print out GPRs, PC and the registers related to exceptions. 2. With tdesc-xml, users can view the register groups described in XML. 2022-07-22 Alan Modra PR15951, binutils testsuite builds status wrapper unconditionally PR 15951 * testsuite/binutils-all/objcopy.exp: Build testglue.o when needs_status_wrapper. 2022-07-22 GDB Administrator Automatic date update in version.in 2022-07-21 Peter Bergner Add ChangeLog entry from previous commit 2022-07-21 Peter Bergner PowerPC: Create new MMA instruction masks and use them The MMA instructions use XX3_MASK|3<<21 as an instruction mask, but that misses the RC bit/bit 31, so if we disassemble a .long that represents an MMA instruction except that it also has bit 31 set, we will erroneously disassemble it to that MMA instruction. We create new masks defines that contain bit 31 so that doesn't happen anymore. opcodes/ * ppc-opc.c (XACC_MASK, XX3ACC_MASK): New defines. (P_GER_MASK, xxmfacc, xxmtacc, xxsetaccz, xvi8ger4pp, xvi8ger4, xvf16ger2pp, xvf16ger2, xvf32gerpp, xvf32ger, xvi4ger8pp, xvi4ger8, xvi16ger2spp, xvi16ger2s, xvbf16ger2pp, xvbf16ger2, xvf64gerpp, xvf64ger, xvi16ger2, xvf16ger2np, xvf32gernp, xvi8ger4spp, xvi16ger2pp, xvbf16ger2np, xvf64gernp, xvf16ger2pn, xvf32gerpn, xvbf16ger2pn, xvf64gerpn, xvf16ger2nn, xvf32gernn, xvbf16ger2nn, xvf64gernn: Use them. 2022-07-21 H.J. Lu i386: Don't allow GOTOFF relocation against IFUNC symbol for PIC We can't use the PLT entry as the function address for PIC since the PIC register may not be set up properly for indirect call. bfd/ PR ld/27998 * elf32-i386.c (elf_i386_relocate_section): Don't allow GOTOFF relocation against IFUNC symbol for PIC. ld/ PR ld/27998 * testsuite/ld-i386/pr27998a.d: Replace -shared with -e bar. * testsuite/ld-i386/pr27998b.d: Expect a linker error. * testsuite/ld-ifunc/ifunc-2-i386-now.d: Updated. * testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386.s: Replace @GOTOFF with @GOT. * testsuite/ld-ifunc/ifunc-2-local-i386.s: Likewise. 2022-07-21 Andrew Burgess gdb: ensure the cast in gdbarch_tdep is valid This commit makes use of gdb::checked_static_cast when casting the generic gdbarch_tdep pointer to a specific sub-class type. This means that, when compiled in developer mode, GDB will validate that the cast is correct. In order to use gdb::checked_static_cast the types involved must have RTTI, which is why the gdbarch_tdep base class now has a virtual destructor. Assuming there are no bugs in GDB where we cast a gdbarch_tdep pointer to the wrong type, then there should be no changes after this commit. If any bugs do exist, then GDB will now assert (in a developer build). 2022-07-21 Andrew Burgess gdbsupport: add checked_static_cast This commit was inspired by these mailing list posts: https://sourceware.org/pipermail/gdb-patches/2022-June/190323.html https://sourceware.org/pipermail/gdb-patches/2022-April/188098.html The idea is to add a new function gdb::checked_static_cast, which can, in some cases, be used as a drop-in replacement for static_cast. And so, if I previously wrote this: BaseClass *base = get_base_class_pointer (); DerivedClass *derived = static_cast (base); I can now write: BaseClass *base = get_base_class_pointer (); DerivedClass *derived = gdb::checked_static_cast (base); The requirement is that BaseClass and DerivedClass must be polymorphic. The benefit of making this change is that, when GDB is built in developer mode, a run-time check will be made to ensure that `base` really is of type DerivedClass before the cast is performed. If `base` is not of type DerivedClass then GDB will assert. In a non-developer build gdb::checked_static_cast is equivalent to a static_cast, and there should be no performance difference. This commit adds the support function, but does not make use of this function, a use will be added in the next commit. Co-Authored-By: Pedro Alves Co-Authored-By: Tom Tromey 2022-07-21 Andrew Burgess gdb: move the type cast into gdbarch_tdep I built GDB for all targets on a x86-64/GNU-Linux system, and then (accidentally) passed GDB a RISC-V binary, and asked GDB to "run" the binary on the native target. I got this error: (gdb) show architecture The target architecture is set to "auto" (currently "i386"). (gdb) file /tmp/hello.rv32.exe Reading symbols from /tmp/hello.rv32.exe... (gdb) show architecture The target architecture is set to "auto" (currently "riscv:rv32"). (gdb) run Starting program: /tmp/hello.rv32.exe ../../src/gdb/i387-tdep.c:596: internal-error: i387_supply_fxsave: Assertion `tdep->st0_regnum >= I386_ST0_REGNUM' failed. What's going on here is this; initially the architecture is i386, this is based on the default architecture, which is set based on the native target. After loading the RISC-V executable the architecture of the current inferior is updated based on the architecture of the executable. When we "run", GDB does a fork & exec, with the inferior being controlled through ptrace. GDB sees an initial stop from the inferior as soon as the inferior comes to life. In response to this stop GDB ends up calling save_stop_reason (linux-nat.c), which ends up trying to read register from the inferior, to do this we end up calling target_ops::fetch_registers, which, for the x86-64 native target, calls amd64_linux_nat_target::fetch_registers. After this I eventually end up in i387_supply_fxsave, different x86 based targets will end in different functions to fetch registers, but it doesn't really matter which function we end up in, the problem is this line, which is repeated in many places: i386_gdbarch_tdep *tdep = (i386_gdbarch_tdep *) gdbarch_tdep (arch); The problem here is that the ARCH in this line comes from the current inferior, which, as we discussed above, will be a RISC-V gdbarch, the tdep field will actually be of type riscv_gdbarch_tdep, not i386_gdbarch_tdep. After this cast we are relying on undefined behaviour, in my case I happen to trigger an assert, but this might not always be the case. The thing I tried that exposed this problem was of course, trying to start an executable of the wrong architecture on a native target. I don't think that the correct solution for this problem is to detect, at the point of cast, that the gdbarch_tdep object is of the wrong type, but, I did wonder, is there a way that we could protect ourselves from incorrectly casting the gdbarch_tdep object? I think that there is something we can do here, and this commit is the first step in that direction, though no actual check is added by this commit. This commit can be split into two parts: (1) In gdbarch.h and arch-utils.c. In these files I have modified gdbarch_tdep (the function) so that it now takes a template argument, like this: template static inline TDepType * gdbarch_tdep (struct gdbarch *gdbarch) { struct gdbarch_tdep *tdep = gdbarch_tdep_1 (gdbarch); return static_cast (tdep); } After this change we are no better protected, but the cast is now done within the gdbarch_tdep function rather than at the call sites, this leads to the second, much larger change in this commit, (2) Everywhere gdbarch_tdep is called, we make changes like this: - i386_gdbarch_tdep *tdep = (i386_gdbarch_tdep *) gdbarch_tdep (arch); + i386_gdbarch_tdep *tdep = gdbarch_tdep (arch); There should be no functional change after this commit. In the next commit I will build on this change to add an assertion in gdbarch_tdep that checks we are casting to the correct type. 2022-07-21 Andrew Burgess gdb: select suitable thread for gdbarch_adjust_breakpoint_address The three targets that implement gdbarch_adjust_breakpoint_address are arm, frv, and mips. In each of these targets the adjust breakpoint address function does some combination of reading the symbol table, or reading memory at the location the breakpoint could be placed. The problem is that performing these actions requires that the current inferior and program space be the one in which the breakpoint will be placed, and this is not currently always the case. Consider a GDB session with multiple inferiors. One inferior might be a native target while another could be a remote target of a completely different architecture. Alternatively, if we consider ARM and AArch64, one native inferior might be AArch64, while a second native inferior could be ARM. In these cases it is possible, and valid, for a user to have one inferior selected, and place a breakpoint in the other inferior by placing a breakpoint on a particular symbol. If this happens, then currently, when gdbarch_adjust_breakpoint_address is called, the wrong inferior (and program space) will be selected, and memory reads, and symbol look ups, will not return the expected results, this could lead to breakpoints being placed in the wrong location. There are currently two places where gdbarch_adjust_breakpoint_address is called: 1. In infrun.c, in the function handle_step_into_function. In this case, I believe that the correct inferior and program space will already be selected as this is called as part of the stop event handling, so I don't think we need to worry about this case, and 2. In breakpoint.c, in the function adjust_breakpoint_address, which is itself called from code_breakpoint::add_location and watch_command_1. The watch_command_1 case I don't think we need to worry about, this is for when a local watch expression is created, which can only be in the currently selected inferior, so this case should be fine. The code_breakpoint::add_location case is the one that needs fixing, this is what allows a breakpoint to be created between inferiors. To fix the code_breakpoint::add_location case, I propose that we pass the "correct" program_space (i.e. the program space in which the breakpoint will be created) to the adjust_breakpoint_address function. Then in adjust_breakpoint_address we can make use of switch_to_program_space_and_thread to switch program_space and inferior before calling gdbarch_adjust_breakpoint_address. I discovered this issue while working on a later patch in this series. This later patch will detect when we cast the result of gdbarch_tdep to the wrong type. With this later patch in place I ran gdb.multi/multi-arch.exp on an AArch64 target. In this situation, two inferiors are created, an AArch64 inferior, and an ARM inferior. The test selected the AArch64 inferior and tries to create a breakpoint in the ARM inferior. As a result of this we end up in arm_adjust_breakpoint_address, which calls arm_pc_is_thumb. Before this commit the AArch64 inferior would be current. As a result, all of the checks in arm_pc_is_thumb would fail (they rely on reading symbols from the current program space), and so, at the end of arm_pc_is_thumb we would call arm_frame_is_thumb. However, remember, at this point the current inferior is the AArch64 inferior, so the current frame is an AArch64 frame. In arm_frame_is_thumb we call arm_psr_thumb_bit, which calls gdbarch_tdep and casts the result to arm_gdbarch_tdep. This is wrong, the tdep field is of type aarch64_gdbarch_tdep. After this we have undefined behaviour. With this patch in place, we will have switched to a thread in the ARM program space before calling arm_adjust_breakpoint_address. As a result, we now succeed in looking up the required symbols in arm_pc_is_thumb, and so we never call arm_frame_is_thumb. However, in the worst case scenario, if we did end up calling arm_frame_is_thumb, as the current inferior should now be the ARM inferior, the current frame should be an ARM frame, so we still should not hit undefined behaviour. I have added an assert to arm_frame_is_thumb. 2022-07-21 Andrew Burgess gdb/mips: rewrite show_mask_address This commit is similar to the previous commit, but in this case GDB is actually relying on undefined behaviour. Consider building GDB for all targets on x86-64/GNU-Linux, then doing this: (gdb) show mips mask-address Zeroing of upper 32 bits of 64-bit addresses is auto. The 32 bit address mask is set automatically. Currently disabled (gdb) The 'show mips mask-address' command ends up in show_mask_address in mips-tdep.c, and this function does this: mips_gdbarch_tdep *tdep = (mips_gdbarch_tdep *) gdbarch_tdep (target_gdbarch ()); Later we might pass TDEP to mips_mask_address_p. However, in my example above, on an x86-64 native target, the current target architecture will be an x86-64 gdbarch, and the tdep field within the gdbarch will be of type i386_gdbarch_tdep, not of type mips_gdbarch_tdep, as a result the cast above was incorrect, and TDEP is not pointing at what it thinks it is. I also think the current output is a little confusing, we appear to have two lines that show the same information, but using different words. The first line comes from calling deprecated_show_value_hack, while the second line is printed directly from show_mask_address. However, both of these lines are printing the same mask_address_var value. I don't think the two lines actually adds any value here. Finally, none of the text in this function is passed through the internationalisation mechanism. It would be nice to remove another use of deprecated_show_value_hack if possible, so this commit does a complete rewrite of show_mask_address. After this commit the output of the above example command, still on my x86-64 native target is: (gdb) show mips mask-address Zeroing of upper 32 bits of 64-bit addresses is "auto" (current architecture is not MIPS). The 'current architecture is not MIPS' text is only displayed when the current architecture is not MIPS. If the architecture is mips then we get the more commonly seen 'currently "on"' or 'currently "off"', like this: (gdb) set architecture mips The target architecture is set to "mips". (gdb) show mips mask-address Zeroing of upper 32 bits of 64-bit addresses is "auto" (currently "off"). (gdb) All the text is passed through the internationalisation mechanism, and we only call gdbarch_tdep when we know the gdbarch architecture is bfd_arch_mips. 2022-07-21 Andrew Burgess gdb/arm: move fetch of arm_gdbarch_tdep to a more inner scope This is a small refactor to resolve an issue before it becomes a problem in a later commit. Move the fetching of an arm_gdbarch_tdep into a more inner scope within two functions in arm-tdep.c. The problem with the current code is that the functions in question are used as the callbacks for two set/show parameters. These set/show parameters are available no matter the current architecture, but are really about controlling an ARM architecture specific setting. And so, if I build GDB for all targets on an x86-64/GNU-Linux system, I can still do this: (gdb) show arm fpu (gdb) show arm abi After these calls we end up in show_fp_model and arm_show_abi respectively, where we unconditionally do this: arm_gdbarch_tdep *tdep = (arm_gdbarch_tdep *) gdbarch_tdep (target_gdbarch ()); However, the gdbarch_tdep() result will only be a arm_gdbarch_tdep if the current architecture is ARM, otherwise the result will actually be of some other type. This isn't actually a problem, as in both cases the use of tdep is guarded by a later check that the gdbarch architecture is bfd_arch_arm. This commit just moves the call to gdbarch_tdep() after the architecture check. In a later commit gdbarch_tdep() will be able to spot when we are casting the result to the wrong type, and this function will trigger assertion failures if things are not fixed. There should be not user visible changes after this commit. 2022-07-21 Torbjörn SVENSSON [arm] Rename arm_cache_is_sp_register to arm_is_alternative_sp_register All usages of this helper are really made to check if the register is one of the alternative SP registers (MSP/MSP_S/MSP_NS/PSP/PSP_S/PSP_NS) with the ARM_SP_REGNUM case being handled separately. 2022-07-21 Tom de Vries [gdb/python] Fix typo in test_python Fix typo in ref_output_0 variable in test_python. Tested by running the selftest on x86_64-linux with python 3.11. 2022-07-21 Tom de Vries [gdb/python] Fix python selftest with python 3.11 With python 3.11 I noticed: ... $ gdb -q -batch -ex "maint selftest python" Running selftest python. Self test failed: self-test failed at gdb/python/python.c:2246 Ran 1 unit tests, 1 failed ... In more detail: ... (gdb) p output $5 = "Traceback (most recent call last):\n File \"\", line 0, \ in \nKeyboardInterrupt\n" (gdb) p ref_output $6 = "Traceback (most recent call last):\n File \"\", line 1, \ in \nKeyboardInterrupt\n" ... Fix this by also allowing line number 0. Tested on x86_64-linux. This should hopefully fix buildbot builder gdb-rawhide-x86_64. 2022-07-21 Tom de Vries [gdbsupport] Fix type of parallel_for_each_debug When I changed the initialization of parallel_for_each_debug from 0 to false, I forgot to change the type from int to bool. Fix this. Tested by rebuilding on x86_64-linux. 2022-07-21 Tom de Vries [gdb/symtab] Fix bad compile unit index complaint I noticed this code in dw2_debug_names_iterator::next: ... case DW_IDX_compile_unit: /* Don't crash on bad data. */ if (ull >= per_bfd->all_comp_units.size ()) { complaint (_(".debug_names entry has bad CU index %s" " [in module %s]"), pulongest (ull), objfile_name (objfile)); continue; } per_cu = per_bfd->get_cu (ull); break; ... This code used to DTRT, before we started keeping both CUs and TUs in all_comp_units. Fix by using "per_bfd->all_comp_units.size () - per_bfd->tu_stats.nr_tus" instead. It's hard to produce a test-case for this, but let's try at least to trigger the complaint somehow. We start out by creating an exec with .debug_types and .debug_names: ... $ gcc -g ~/hello.c -fdebug-types-section $ gdb-add-index -dwarf-5 a.out ... and verify that we don't see any complaints: ... $ gdb -q -batch -iex "set complaints 100" ./a.out ... We look at the CU and TU table using readelf -w and conclude that we have nr_cus == 6 and nr_tus == 1. Now override ull in dw2_debug_names_iterator::next for the DW_IDX_compile_unit case to 6, and we have: ... $ gdb -q -batch -iex "set complaints 100" ./a.out During symbol reading: .debug_names entry has bad CU index 6 [in module a.out] ... After this, it still crashes because this code in dw2_debug_names_iterator::next: ... /* Skip if already read in. */ if (m_per_objfile->symtab_set_p (per_cu)) goto again; ... is called with per_cu == nullptr. Fix this by skipping the entry if per_cu == nullptr. Now revert the fix and observe that the complaint disappears, so we've confirmed that the fix is required. A somewhat similar issue for .gdb_index in dw2_symtab_iter_next has been filed as PR29367. Tested on x86_64-linux, with native and target board cc-with-debug-names. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29336 2022-07-21 Jan Beulich x86: replace wrong attributes on VCVTDQ2PH{X,Y} A standalone (without SAE) StaticRounding attribute is meaningless, and indeed all other similar insns have ATTSyntax there instead. I can only assume this was some strange copy-and-paste mistake. x86/Intel: correct AVX512F scatter insn element sizes I clearly screwed up in 6ff00b5e12e7 ("x86/Intel: correct permitted operand sizes for AVX512 scatter/gather") giving all AVX512F scatter insns Dword element size. Update testcases (also their gather parts), utilizing that there previously were two identical lines each (for no apparent reason). 2022-07-21 Alan Modra PR29390, DW_CFA_AARCH64_negate_ra_state vs. DW_CFA_GNU_window_save PR 29390 binutils/ * dwarf.c (is_aarch64, DW_CFA_GNU_window_save_name): New. (display_debug_frames): Use them. (init_dwarf_regnames_aarch64): Set is_aarch64. (init_dwarf_regnames_by_elf_machine_code): Clear is_aarch64. (init_dwarf_regnames_by_bfd_arch_and_mach): Likewise. gas/ * testsuite/gas/aarch64/pac_ab_key.d: Adjust expected output. * testsuite/gas/aarch64/pac_negate_ra_state.d: Likewise. 2022-07-21 Alan Modra PR29337, readelf CU/TU mixup in .gdb_index Commit 244e19c79111 changed a number of variables in display_gdb_index to count entries rather than words. PR 29337 * dwarf.c (display_gdb_index): Correct use of cu_list_elements. 2022-07-21 Alan Modra PR29370, infinite loop in display_debug_abbrev The PR29370 testcase is a fuzzed object file with multiple .trace_abbrev sections. Multiple .trace_abbrev or .debug_abbrev sections are not a violation of the DWARF standard. The DWARF5 standard even gives an example of multiple .debug_abbrev sections contained in groups. Caching and lookup of processed abbrevs thus needs to be done by section and offset rather than base and offset. (Why base anyway?) Or, since section contents are kept, by a pointer into the contents. PR 29370 * dwarf.c (struct abbrev_list): Replace abbrev_base and abbrev_offset with raw field. (find_abbrev_list_by_abbrev_offset): Delete. (find_abbrev_list_by_raw_abbrev): New function. (process_abbrev_set): Set list->raw and list->next. (find_and_process_abbrev_set): Replace abbrev list lookup with new function. Don't set list abbrev_base, abbrev_offset or next. 2022-07-21 Alan Modra binutils/dwarf.c: abbrev caching I'm inclined to think that abbrev caching is counter-productive. The time taken to search the list of abbrevs converted to internal form is non-zero, and it's easy to decode the raw abbrevs. It's especially silly to cache empty lists of decoded abbrevs (happens with zero padding in .debug_abbrev), or abbrevs as they are displayed when there is no further use of those abbrevs. This patch stops caching in those cases. * dwarf.c (record_abbrev_list_for_cu): Add free_list param. Put abbrevs on abbrev_lists here. (new_abbrev_list): Delete function. (process_abbrev_set): Return newly allocated list. Move abbrev base, offset and size checking to.. (find_and_process_abbrev_set): ..here, new function. Handle lookup of cached abbrevs here, and calculate start and end for process_abbrev_set. Return free_list if newly alloc'd. (process_debug_info): Consolidate cached list lookup, new list alloc and processing into find_and_process_abbrev_set call. Free list when not cached. (display_debug_abbrev): Similarly. 2022-07-21 Alan Modra miscellaneous dwarf.c tidies * dwarf.c: Leading and trailing whitespace fixes. (free_abbrev_list): New function. (free_all_abbrevs): Use the above. Free cu_abbrev_map here too. (process_abbrev_set): Print actual section name on error. (get_type_abbrev_from_form): Add overflow check. (free_debug_memory): Don't free cu_abbrev_map here.. (process_debug_info): ..or here. Warn on another case of not finding a neeeded abbrev. 2022-07-21 Alan Modra PowerPC64: fix build error on 32-bit hosts elf64-ppc.c:11673:33: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘bfd_vma’ {aka ‘long long unsigned int’} [-Werror=format=] 11673 | fprintf (stderr, "offset = %#lx:", stub_entry->stub_offset); | ~~~^ ~~~~~~~~~~~~~~~~~~~~~~~ | | | | | bfd_vma {aka long long unsigned int} | long unsigned int | %#llx * elf64-ppc.c (dump_stub): Use BFD_VMA_FMT. 2022-07-21 Kevin Buettner Wrap python_write_bytecode with HAVE_PYTHON ifdef This commit fixes a build error on machines lacking python headers and/or libraries. 2022-07-21 GDB Administrator Automatic date update in version.in 2022-07-20 Kevin Buettner Handle Python 3.11 deprecation of PySys_SetPath and Py_SetProgramName Python 3.11 deprecates PySys_SetPath and Py_SetProgramName. The PyConfig API replaces these and other functions. This commit uses the PyConfig API to provide equivalent functionality while also preserving support for older versions of Python, i.e. those before Python 3.8. A beta version of Python 3.11 is available in Fedora Rawhide. Both Fedora 35 and Fedora 36 use Python 3.10, while Fedora 34 still used Python 3.9. I've tested these changes on Fedora 34, Fedora 36, and rawhide, though complete testing was not possible on rawhide due to a kernel bug. That being the case, I decided to enable the newer PyConfig API by testing PY_VERSION_HEX against 0x030a0000. This corresponds to Python 3.10. We could try to use the PyConfig API for Python versions as early as 3.8, but I'm reluctant to do this as there may have been PyConfig related bugs in earlier versions which have since been fixed. Recent linux distributions should have support for Python 3.10. This should be more than adequate for testing the new Python initialization code in GDB. Information about the PyConfig API as well as the motivation behind deprecating the old interface can be found at these links: https://github.com/python/cpython/issues/88279 https://peps.python.org/pep-0587/ https://docs.python.org/3.11/c-api/init_config.html The v2 commit also addresses several problems that Simon found in the v1 version. In v1, I had used Py_DontWriteBytecodeFlag in the new initialization code, but Simon pointed out that this global configuration variable will be deprecated in Python 3.12. This version of the patch no longer uses Py_DontWriteBytecodeFlag in the new initialization code. Additionally, both Py_DontWriteBytecodeFlag and Py_IgnoreEnvironmentFlag will no longer be used when building GDB against Python 3.10 or higher. While it's true that both of these global configuration variables are deprecated in Python 3.12, it makes sense to disable their use for gdb builds against 3.10 and higher since those are the versions for which the PyConfig API is now being used by GDB. (The PyConfig API includes different mechanisms for making the same settings afforded by use of the soon-to-be deprecated global configuration variables.) Simon also noted that PyConfig_Clear() would not have be called for one of the failure paths. I've fixed that problem and also made the rest of the "bail out" code more direct. In particular, PyConfig_Clear() will always be called, both for success and failure. The v3 patch addresses some rebase conflicts related to module initialization . Commit 3acd9a692dd ("Make 'import gdb.events' work") uses PyImport_ExtendInittab instead of PyImport_AppendInittab. That commit also initializes a struct for each module to import. Both the initialization and the call to were moved ahead of the ifdefs to avoid having to replicate (at least some of) the code three times in various portions of the ifdefs. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28668 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29287 2022-07-20 Christopher Di Bella gdb/value.c: add several headers to the include list Building GDB currently fails to build with libc++, because libc++ is stricter about which headers "leak" entities they're not guaranteed to support. The following headers have been added: * ``, to support `std::back_inserter` * ``, to support `std::move` and `std::swap` * ``, to support `std::vector` Change-Id: Iaeb15057c5fbb43217df77ce34d4e54446dbcf3d 2022-07-20 Pedro Alves Don't stop all threads prematurely after first step of "step N" In all-stop mode, when the target is itself in non-stop mode (like GNU/Linux), if you use the "step N" (or "stepi/next/nexti N") to step a thread a number of times: (gdb) help step step, s Step program until it reaches a different source line. Usage: step [N] Argument N means step N times (or till program stops for another reason). ... GDB prematurely stops all threads after the first step, and doesn't re-resume them for the subsequent N-1 steps. It's as if for the 2nd and subsequent steps, the command was running with scheduler-locking enabled. This can be observed with the testcase added by this commit, which looks like this: static pthread_barrier_t barrier; static void * thread_func (void *arg) { pthread_barrier_wait (&barrier); return NULL; } int main () { pthread_t thread; int ret; pthread_barrier_init (&barrier, NULL, 2); /* We run to this line below, and then issue "next 3". That should step over the 3 lines below and land on the return statement. If GDB prematurely stops the thread_func thread after the first of the 3 nexts (and never resumes it again), then the join won't ever return. */ pthread_create (&thread, NULL, thread_func, NULL); /* set break here */ pthread_barrier_wait (&barrier); pthread_join (thread, NULL); return 0; } The test hangs and times out without the GDB fix: (gdb) next 3 [New Thread 0x7ffff7d89700 (LWP 525772)] FAIL: gdb.threads/step-N-all-progress.exp: non-stop=off: target-non-stop=on: next 3 (timeout) The problem is a core gdb bug. When you do "step/stepi/next/nexti N", GDB internally creates a thread_fsm object and associates it with the stepping thread. For the stepping commands, the FSM's class is step_command_fsm. That object is what keeps track of how many steps are left to make. When one step finishes, handle_inferior_event calls stop_waiting and returns, and then fetch_inferior_event calls the "should_stop" method of the event thread's FSM. The implementation of that method decrements the steps-left counter. If the counter is 0, it returns true and we proceed to presenting the stop to the user. If it isn't 0 yet, then the method returns false, indicating to fetch_inferior_event to "keep going". Focusing now on when the first step finishes -- we're in "all-stop" mode, with the target in non-stop mode. When a step finishes, handle_inferior_event calls stop_waiting, which itself calls stop_all_threads to stop everything. I.e., after the first step completes, all threads are stopped, before handle_inferior_event returns. And after that, now in fetch_inferior_event, we consult the thread's thread_fsm::should_stop, which as we've seen, for the first step returns false -- i.e., we need to keep_going for another step. However, since the target is in non-stop mode, keep_going resumes _only_ the current thread. All the other threads remain stopped, inadvertently. If the target is in non-stop mode, we don't actually need to stop all threads right after each step finishes, and then re-resume them again. We can instead defer stopping all threads until all the steps are completed. So fix this by delaying the stopping of all threads until after we called the FSM's "should_stop" method. I.e., move it from stop_waiting, to handle_inferior_events's callers, fetch_inferior_event and wait_for_inferior. New test included. Tested on x86-64 GNU/Linux native and gdbserver. Change-Id: Iaad50dcfea4464c84bdbac853a89df92ade6ae01 2022-07-20 Alan Modra Re: opcodes/arc: Implement style support in the disassembler * arc-dis.c (print_insn_arc): Fix thinko. 2022-07-20 Dmitry Selyutin gas/symbols: introduce md_resolve_symbol Assuming GMSD is a special operand, marked as O_md1, the code: .set VREG, GMSD .set REG, VREG extsw REG, 2 ...fails upon attempts to resolve the value of the symbol. This happens since machine-dependent values are not handled in the giant op switch. We introduce a custom md_resolve_symbol macro; the ports can use this macro to customize the behavior when resolve_symbol_value hits O_md operand. 2022-07-20 GDB Administrator Automatic date update in version.in 2022-07-19 H.J. Lu x86: Disallow invalid relocations against protected symbols Since glibc 2.36 will issue warnings for copy relocation against protected symbols and non-canonical reference to canonical protected functions, change the linker to always disallow such relocations. bfd/ * elf32-i386.c (elf_i386_scan_relocs): Remove check for elf_has_indirect_extern_access. * elf64-x86-64.c (elf_x86_64_scan_relocs): Likewise. (elf_x86_64_relocate_section): Remove check for elf_has_no_copy_on_protected. * elfxx-x86.c (elf_x86_allocate_dynrelocs): Check for building executable instead of elf_has_no_copy_on_protected. (_bfd_x86_elf_adjust_dynamic_symbol): Disallow copy relocation against non-copyable protected symbol. * elfxx-x86.h (SYMBOL_NO_COPYRELOC): Remove check for elf_has_no_copy_on_protected. ld/ * testsuite/ld-i386/i386.exp: Expect linker error for PR ld/17709 test. * testsuite/ld-i386/pr17709.rd: Removed. * testsuite/ld-i386/pr17709.err: New file. * testsuite/ld-x86-64/pr17709.rd: Removed. * testsuite/ld-x86-64/pr17709.err: New file. * testsuite/ld-x86-64/pr28875-func.err: Updated. * testsuite/ld-x86-64/x86-64.exp: Expect linker error for PR ld/17709 test. Add tests for function pointer against protected function. 2022-07-19 Fangrui Song x86: Make protected symbols local for -shared Call _bfd_elf_symbol_refs_local_p with local_protected==true. This has 2 noticeable effects for -shared: * GOT-generating relocations referencing a protected data symbol no longer lead to a GLOB_DAT (similar to a hidden symbol). * Direct access relocations (e.g. R_X86_64_PC32) no longer has the confusing diagnostic below. __attribute__((visibility("protected"))) void *foo() { return (void *)foo; } // gcc -fpic -shared -fuse-ld=bfd relocation R_X86_64_PC32 against protected symbol `foo' can not be used when making a shared object The new behavior matches arm, aarch64 (commit 83c325007c5599fa9b60b8d5f7b84842160e1d1b), and powerpc ports, and other linkers: gold and ld.lld. Note: if some code tries to use direct access relocations to take the address of foo, the pointer equality will break, but the error should be reported on the executable link, not on the innocent shared object link. glibc 2.36 will give a warning at relocation resolving time. With this change, `#define elf_backend_extern_protected_data 1` is no longer effective. Just remove it. Remove the test "Run protected-func-1 without PIE" since -fno-pic address taken operation in the executable doesn't work with protected symbol in a shared object by default. Similarly, remove protected-data-1a and protected-data-1b. protected-data-1b can be made working by removing HAVE_LD_PIE_COPYRELOC from GCC (https://sourceware.org/pipermail/gcc-patches/2022-June/596678.html). 2022-07-19 Luis Machado Reformat gdbarch-components.py to fix deviations Reformat to make sure we have a clean file with no deviations from the expected python code format. 2022-07-19 Luis Machado [AArch64] MTE corefile support Teach GDB how to dump memory tags for AArch64 when using the gcore command and how to read memory tag data back from a core file generated by GDB (via gcore) or by the Linux kernel. The format is documented in the Linux Kernel documentation [1]. Each tagged memory range (listed in /proc//smaps) gets dumped to its own PT_AARCH64_MEMTAG_MTE segment. A section named ".memtag" is created for each of those segments when reading the core file back. To save a little bit of space, given MTE tags only take 4 bits, the memory tags are stored packed as 2 tags per byte. When reading the data back, the tags are unpacked. I've added a new testcase to exercise the feature. Build-tested with --enable-targets=all and regression tested on aarch64-linux Ubuntu 20.04. [1] Documentation/arm64/memory-tagging-extension.rst (Core Dump Support) 2022-07-19 Luis Machado [AArch64] Support AArch64 MTE memory tag dumps in core files The Linux kernel can dump memory tag segments to a core file, one segment per mapped range. The format and documentation can be found in the Linux kernel tree [1]. The following patch adjusts bfd and binutils so they can handle this new segment type and display it accordingly. It also adds code required so GDB can properly read/dump core file data containing memory tags. Upon reading, each segment that contains memory tags gets mapped to a section named "memtag". These sections will be used by GDB to lookup the tag data. There can be multiple such sections with the same name, and they are not numbered to simplify GDB's handling and lookup. There is another patch for GDB that enables both reading and dumping of memory tag segments. Tested on aarch64-linux Ubuntu 20.04. [1] Documentation/arm64/memory-tagging-extension.rst (Core Dump Support) 2022-07-19 Luis Machado [AArch64] Fix testcase compilation failure Newer distros carry newer headers that contains MTE definitions. Account for that fact in the MTE testcases (gdb.arch/aarch64-mte.exp) and define constants conditionally to prevent compilation failures. 2022-07-19 H.J. Lu ld: Pass -nostdlib to compiler with -r Pass -nostdlib to compiler with -r to avoid unnecessary .o file and libraries. PR ld/29377 * testsuite/ld-elf/linux-x86.exp: Pass -nostdlib with -r. 2022-07-19 H.J. Lu x86: Properly check invalid relocation against protected symbol Only check invalid relocation against protected symbol defined in shared object. bfd/ PR ld/29377 * elf32-i386.c (elf_i386_scan_relocs): Only check invalid relocation against protected symbol defined in shared object. * elf64-x86-64.c (elf_x86_64_scan_relocs): Likewise. ld/ PR ld/29377 * testsuite/ld-elf/linux-x86.exp: Run PR ld/29377 tests. * testsuite/ld-elf/pr29377a.c: New file. * testsuite/ld-elf/pr29377b.c: Likewise. 2022-07-19 GDB Administrator Automatic date update in version.in 2022-07-18 Vladimir Mezentsev gprofng: link libgprofng.so against -lpthread gprofng/ChangeLog 2022-07-15 Vladimir Mezentsev PR gprofng/29364 * src/Makefile.am (libgprofng_la_LIBADD): Add -lpthread. * src/Makefile.in: Rebuild. 2022-07-18 Vladimir Mezentsev gprofng: fix regression in build and a race condition in autoreconf gprofng/ChangeLog 2022-07-14 Vladimir Mezentsev PR gprofng/29338 * libcollector/configure.ac (AC_CONFIG_HEADERS): Fix a race condition. * libcollector/configure: Rebuild. * libcollector/Makefile.in: Rebuild. * common/config.h.in: Rebuild. * common/lib-config.h.in: Created by autoreconf. 2022-07-18 Tom Tromey Add gdb.free_objfile event registry Currently, Python code can use event registries to detect when gdb loads a new objfile, and when gdb clears the objfile list. However, there's no way to detect the removal of an objfile, say when the inferior calls dlclose. This patch adds a gdb.free_objfile event registry and arranges for an event to be emitted in this case. 2022-07-18 Pedro Alves Put gdb.base/bt-on-fatal-signal.exp GDB cores in output dir I noticed that gdb.base/bt-on-fatal-signal.exp was contributing four core files to the count of unexpected core files: $ make check TESTS="gdb.base/bt-on-fatal-signal.exp" === gdb Summary === # of unexpected core files 4 # of expected passes 21 These are GDB core dumps. They are expected, however, because the whole point of the testcase is to crash GDB with a signal. Make GDB change its current directory to the output dir just before crashing, so that the core files end up there. The result is now: === gdb Summary === # of expected passes 25 and: $ find . -name "core.*" ./testsuite/outputs/gdb.base/bt-on-fatal-signal/core.gdb.1676506.nelson.1657727692 ./testsuite/outputs/gdb.base/bt-on-fatal-signal/core.gdb.1672585.nelson.1657727671 ./testsuite/outputs/gdb.base/bt-on-fatal-signal/core.gdb.1674833.nelson.1657727683 ./testsuite/outputs/gdb.base/bt-on-fatal-signal/core.gdb.1673709.nelson.1657727676 (Note the test is skipped at the top if on a remote host.) Change-Id: I79e4fb2e91330279c7a509930b1952194a72e85a 2022-07-18 Tom Tromey Remove array typedef assumption for Ada Currently the Ada code assumes that it can distinguish between a multi-dimensional array and an array of arrays by looking for an intervening typedef -- that is, for an array of arrays, there will be a typedef wrapping the innermost array type. A recent compiler change removes this typedef, which causes a gdb failure in the internal AdaCore test suite. This patch handles this case by checking whether the array type in question has a name. 2022-07-18 Tom Tromey Remove manual lifetime management from cli_interp cli_interp manually manages its cli_out object. This patch changes it to use a unique_ptr, and also changes cli_uiout to be a private member. Remove cli_out_new cli_out_new is just a small wrapper around 'new'. This patch removes it, replacing it with uses of 'new' instead. Replace input_interactive_p with a method This replaces the global input_interactive_p function with a new method ui::input_interactive_p. Remove ui_register_input_event_handler This patch removes ui_register_input_event_handler and ui_unregister_input_event_handler, replacing them with methods on 'ui'. It also changes gdb to use these methods everywhere, rather than sometimes reaching in to the ui to manage the file descriptor directly. 2022-07-18 Claudiu Zissulescu opcodes/arc: Implement style support in the disassembler Update the ARC disassembler to supply style information to the disassembler output. The output formatting remains unchanged. opcodes/ChangeLog: * disassemble.c (disassemble_init_for_target): Set created_styled_output for ARC based targets. * arc-dis.c (find_format_from_table): Use fprintf_styled_ftype instead of fprintf_ftype throughout. (find_format): Likewise. (print_flags): Likewise. (print_insn_arc): Likewise. 2022-07-18 Claudiu Zissulescu arc: Update missing cipher. The ciphers 5,7, and 9 are missing when parsing an assembly instruction leading to errors when those ciphers are used. gas/config * tc-arc.c (md_assembly): Update strspn string with the missing ciphers. 2022-07-18 Tom de Vries [gdb/testsuite] Remove duplicate of supports_gnuc In commit 9d9dd861e98 ("[gdb/testsuite] Fix regression in step-indirect-call-thunk.exp with gcc 7") I accidentally committed a duplicate of supports_gnuc, which caused: ... DUPLICATE: gdb.base/gdb-caching-proc.exp: supports_gnuc: consistency ... Fix this by removing the duplicate. Tested on x86_64-linux. 2022-07-18 Andrew Burgess gdb/python: look for python, then python 3 at configure time It is possible that a system might have a python3 executable, but no python executable. For example, on my Fedora system the python2 package provides /usr/bin/python2, the python3 package provides /usr/bin/python3, and the python-unversioned-command package provides /usr/bin/python, which picks between python2 and python3. It is quite possible to only have python3 available on a system. Currently, when GDB configures, it looks for a 'python' executable. If non is found then GDB will be built without python support. Or the user needs to configure using --with-python=/usr/bin/python3. This commit updates GDB's configure.ac script to first look for 'python', and then 'python3'. Now, on a system that only has a python3 executable, GDB will automatically find, and use that in order to provide python support, no user supplied configure arguments are needed. I've tested this on my local machine by removing the python-unversioned-command package, confirming that there is no longer a 'python' executable in my $PATH, and then rebuilding GDB from scratch. GDB with this patch has python support. 2022-07-18 Jan Beulich x86: correct VMOVSH attributes Both forms were missing VexW0 (thus allowing Evex.W=1 to be encoded by suitable means, which would cause #UD). The memory operand form further was using the wrong Masking value, thus allowing zeroing-masking to be encoded for the store form (which would again cause #UD). x86: re-order insn template fields This saves quite a number of shift instructions: The "operands" field can now be retrieved by just masking (no shift), and extracting the "extension_opcode" field now only requires a (signed) right shift, with no prereq left one. (Of course there may be architectures where, in a cross build, there might be no difference at all, e.g. when there are suitable bitfield extraction insns.) 2022-07-18 Tom de Vries [gdbsupport] Improve thread scheduling in parallel_for_each When running a task using parallel_for_each, we get the following distribution: ... Parallel for: n_elements: 7271 Parallel for: minimum elements per thread: 10 Parallel for: elts_per_thread: 1817 Parallel for: elements on worker thread 0 : 1817 Parallel for: elements on worker thread 1 : 1817 Parallel for: elements on worker thread 2 : 1817 Parallel for: elements on worker thread 3 : 0 Parallel for: elements on main thread : 1820 ... Note that there are 4 active threads, and scheduling elts_per_thread on each of those handles 4 * 1817 == 7268, leaving 3 "left over" elements. These leftovers are currently handled in the main thread. That doesn't seem to matter much for this example, but for say 10 threads and 99 elements, you'd have 9 threads handling 9 elements and 1 thread handling 18 elements. Instead, distribute the left over elements over the worker threads, such that we have: ... Parallel for: elements on worker thread 0 : 1818 Parallel for: elements on worker thread 1 : 1818 Parallel for: elements on worker thread 2 : 1818 Parallel for: elements on worker thread 3 : 0 Parallel for: elements on main thread : 1817 ... Tested on x86_64-linux. 2022-07-18 Tom de Vries [gdb/testsuite] Allow override of ASAN_OPTIONS in lib/gdb.exp Use set_sanitizer_default for ASAN_OPTIONS in lib/gdb.exp. This allows us to override the default detect_leaks=0 setting, by manually doing: ... $ export ASAN_OPTIONS=detect_leaks=1 $ make check ... Tested on x86_64-linux, by building with -fsanitize=address and running test-case gdb.dwarf2/gdb-add-index.exp with and without "export ASAN_OPTIONS=detect_leaks=1". 2022-07-18 Tom de Vries [gdb/testsuite] Fix regression in step-indirect-call-thunk.exp with gcc 7 Since commit 43127ae5714 ("Fix gdb.base/step-indirect-call-thunk.exp") I run into: ... gdb compile failed, gcc: error: unrecognized command line option \ '-fcf-protection=none'; did you mean '-flto-partition=none'? UNTESTED: gdb.base/step-indirect-call-thunk.exp: failed to prepare ... The problem is that -fcf-protection is supported starting gcc 8, but I'm using system gcc 7.5.0. Fix this by only adding -fcf-protection=none for gcc 8 and later. Tested on x86_64-linux, with gcc 7.5.0, 8.2.1 and 12.1.1. 2022-07-18 Tom de Vries [gdb/testsuite] Fix gdb.arch/i386-mpx.exp Since commit c4a3dbaf113 ("Expose current 'print' settings to Python") we have: ... (gdb) print /x $bnd0 = {0x10, 0x20}^M $22 = {lbound = 0x10, ubound = 0x20} : size 0x11^M (gdb) FAIL: gdb.arch/i386-mpx.exp: verify size for bnd0 ... The regexp in the test-case expects "size 17". Fix this by updating the regexp. Tested on x86_64-linux. 2022-07-18 Tom de Vries [gdbsupport] Add parallel_for_each_debug Add a parallel_for_each_debug variable, set to false by default. With an a.out compiled from hello world, we get with parallel_for_each_debug == true: ... $ gdb -q -batch a.out -ex start ... Parallel for: n_elements: 7271 Parallel for: minimum elements per thread: 10 Parallel for: elts_per_thread: 1817 Parallel for: elements on worker thread 0 : 1817 Parallel for: elements on worker thread 1 : 1817 Parallel for: elements on worker thread 2 : 1817 Parallel for: elements on worker thread 3 : 0 Parallel for: elements on main thread : 1820 Temporary breakpoint 1, main () at /home/vries/hello.c:6 6 printf ("hello\n"); ... Tested on x86_64-linux. 2022-07-18 GDB Administrator Automatic date update in version.in 2022-07-17 GDB Administrator Automatic date update in version.in 2022-07-16 GDB Administrator Automatic date update in version.in 2022-07-15 Aaron Merey gdb-add-index always generates an error when libdebuginfod wasn't compiled in gdb-add-index runs gdb with -iex 'set debuginfod enabled off'. If gdb is not compiled against libdebuginfod this causes an unnecessary error message to be printed to stderr indicating that gdb was not built with debuginfod support. Fix this by changing the 'set debuginfod enabled off' command to a no-op when gdb isn't built with libdebuginfod. 2022-07-15 Bruno Larsen gdb/testsuite: modernize gdb.base/maint.exp gdb.base/maint.exp was using several gdb_expect statements, probably because this test case predates the existance of gdb_test_multiple. This commit updates the test case to use gdb_test_multiple, making it more resilient to internal errors and such. The only gdb_expect left in the testcase is one that specifically looks for an internal error being triggered as a PASS. 2022-07-15 Tom Tromey Add 'nibbles' to gdb.print_options When I rebased and updated the print_options patch, I forgot to update print_options to add the new 'nibbles' feature to the result. This patch fixes the oversight. I'm checking this in. 2022-07-15 Carl Love PowerPC: Add support for IEEE 128-bit format. The test gdb.base/infcall-nested-structs-c.exp fails on a gdb assert in function ppc64_sysv_abi_return_value in file gdb/ppc-sysv-tdep.c. The assert is due to the missing IEEE 128-bit support in file gdb/ppc-sysv-tdep.c. The IBM long double was the initial float 128-bit support added by IBM The IEEE 128-bit support, which is similar IBM long double support, was made the default starting with GCC 12. The floating point format differences include the number of bits used to encode the exponent and significand. Also, IBM long double values are passed in a pair of floating point registers. The IEEE 128-bit value is passed in a single vector register. This patch fixes the gdb_assert (ok); in function ppc64_sysv_abi_return_value in gdb/ppc-sysv-tdep.c by adding IEEE FLOAT 128-bit type support for PowerPC. The patch has been tested on Power 10, ELFv2. It fixes the following list of regression failures on Power 10: gdb.base/infcall-nested-structs-c.exp 192 gdb.base/infcall-nested-structs-c++.exp 76 gdb.base/structs.exp 9 The patch has been tested on Power 8 BE which is ELFv1. 2022-07-15 Tom Tromey Add 'summary' mode to Value.format_string This adds a 'summary' mode to Value.format_string and to gdb.print_options. For the former, it lets Python code format values using this mode. For the latter, it lets a printer potentially detect if it is being called in a backtrace with 'set print frame-arguments' set to 'scalars'. I considered adding a new mode here to let a pretty-printer see whether it was being called in a 'backtrace' context at all, but I'm not sure if this is really desirable. 2022-07-15 Tom Tromey Expose current 'print' settings to Python PR python/17291 asks for access to the current print options. While I think this need is largely satisfied by the existence of Value.format_string, it seemed to me that a bit more could be done. First, while Value.format_string uses the user's settings, it does not react to temporary settings such as "print/x". This patch changes this. Second, there is no good way to examine the current settings (in particular the temporary ones in effect for just a single "print"). This patch adds this as well. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17291 2022-07-15 Carl Love PowerPC: fix for gdb.base/eh_return.exp Disable the Traceback Table generation on PowerPC for this test. The Traceback Table consists of a series of bit fields to indicate things like the Traceback Table version, language, and specific information about the function. The Traceback Table is generated following the end of the code for every function by default. The Traceback Table is defined in the PowerPC ELF ABI and is intended to support debuggers and exception handlers. The Traceback Table is displayed in the disassembly of functions by default and is part of the function length. The table is typically interpreted by the disassembler as data represented by .long xxx entries. Generation of the Traceback Table is disabled in this test using the PowerPC specific gcc compiler option -mtraceback=no, the xlc option additional_flags-qtable=none and the clang optons -mllvm -xcoff-traceback-table=false. Disabling the Traceback Table generation in this test results in the gdb_test_multiple statement correctly locating the address of the bclr instruction before the statement "End of assembler dump." in the disassembly output. 2022-07-15 Tom Tromey Run 'black' on gdb Running 'black' on gdb fixed a couple of small issues. This patch is the result. 2022-07-15 GDB Administrator Automatic date update in version.in 2022-07-14 Tom de Vries [gdb/symtab] Fix data race in cooked_index_functions::expand_symtabs_matching When building gdb with -fsanitize-threads and running test-case gdb.ada/char_enum_unicode.exp, I run into: ... WARNING: ThreadSanitizer: data race (pid=21301)^M Write of size 8 at 0x7b2000008080 by main thread:^M #0 free (libtsan.so.2+0x4c5e2)^M #1 _dl_close_worker (ld-linux-x86-64.so.2+0x4b7b)^M #2 convert_between_encodings() charset.c:584^M ... #21 cooked_index_functions::expand_symtabs_matching() read.c:18606 ... This is fixed by making cooked_index_functions::expand_symtabs_matching wait for the cooked index finalization to be done. Tested on x86_64-linux. https://sourceware.org/bugzilla/show_bug.cgi?id=29311 https://sourceware.org/bugzilla/show_bug.cgi?id=29286 2022-07-14 Tom de Vries [gdbsupport] Add sequential_for_each Add a sequential_for_each alongside the parallel_for_each, which can be used as a drop-in replacement. This can be useful when debugging multi-threading behaviour, and you want to limit multi-threading in a fine-grained way. Tested on x86_64-linux, by using it instead of the parallel_for_each in dwarf2_build_psymtabs_hard. 2022-07-14 Tiezhu Yang gdb: Document floating-point support for LoongArch Update NEWS and gdb.texinfo to document floating-point support for LoongArch. 2022-07-14 Tom de Vries [gdb/build] Fix gdb build with gcc 4.8.5 When building gdb with gcc 4.8.5, we run into: ... In file included from /usr/include/c++/4.8/future:43:0, from gdbsupport/thread-pool.h:30, from gdb/dwarf2/cooked-index.h:33, from gdb/dwarf2/read.h:26, from gdb/dwarf2/abbrev-cache.c:21: /usr/include/c++/4.8/atomic: In instantiation of \ ‘_Tp std::atomic<_Tp>::load(std::memory_order) const [with _Tp = \ packed; std::memory_order = std::memory_order]’: gdb/dwarf2/read.h:332:44: required from here /usr/include/c++/4.8/atomic:208:13: error: no matching function for call to \ ‘packed::packed()’ _Tp tmp; ^ ... Fix this by adding the default constructor for packed. Tested on x86_64-linux, with gdb build with gcc 4.8.5. 2022-07-14 Tom de Vries [gdb/symtab] Make per_cu->m_lang atomic When building gdb with -fsanitize=thread and running test-case gdb.dwarf2/inlined_subroutine-inheritance.exp, we run into a data race between: ... Read of size 1 at 0x7b2000003010 by thread T4: #0 packed::operator language() const packed.h:54 #1 dwarf2_per_cu_data::set_lang(language) read.h:363 ... and: ... Previous write of size 1 at 0x7b2000003010 by main thread: #0 dwarf2_per_cu_data::set_lang(language) read.h:365 ... Fix this by making per_cu->m_lang atomic. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29286 2022-07-14 Tom de Vries [gdb/symtab] Make per_cu->unit_type atomic With gdb with -fsanitize=thread and test-case gdb.ada/array_bounds.exp, I run into a data race between: ... Read of size 1 at 0x7b2000025f0f by main thread: #0 packed::operator dwarf_unit_type() const packed.h:54 #1 dwarf2_per_cu_data::set_unit_type(dwarf_unit_type) read.h:339 ... and: ... Previous write of size 1 at 0x7b2000025f0f by thread T3: #0 dwarf2_per_cu_data::set_unit_type(dwarf_unit_type) read.h:341 ... Fix this by making per_cu->unit_type atomic. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29286 2022-07-14 Tom de Vries [gdb/symtab] Fix data race in ~charset_vector When doing: ... $ gdb ./outputs/gdb.ada/char_enum_unicode/foo -batch -ex "break foo.adb:26" ... with a gdb build with -fsanitize=thread I run into a data race: ... WARNING: ThreadSanitizer: data race (pid=30917) Write of size 8 at 0x7b0400004070 by main thread: #0 free (libtsan.so.2+0x4c5e2) #1 xfree gdbsupport/gdb-xfree.h:37 (gdb+0x650f17) #2 charset_vector::clear() gdb/charset.c:703 (gdb+0x651354) #3 charset_vector::~charset_vector() gdb/charset.c:697 (gdb+0x6512d3) #4 (libtsan.so.2+0x32643) #5 captured_main_1 gdb/main.c:1310 (gdb+0xa3975a) ... The problem is that we're freeing the charset_vector elements in the destructor, which may still be used by a worker thread. Fix this by not freeing the charset_vector elements in the destructor. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29311 2022-07-14 Alan Modra Re: PowerPC: implement md_operand to parse register names I meant to make this change before committing, to let compilers know the code on the false branch of md_parse_name is dead. * config/tc-ppc.c (ppc_parse_name): Return void. * config/tc-ppc.h (md_parse_name): Always true. (ppc_parse_name): Update prototype. 2022-07-14 Alan Modra PowerPC: implement md_operand to parse register names Allows register names to appear in symbol assignments, so for example tocp = %r2 mr %r3,tocp now assembles. * gas/config/tc-ppc.c (REG_NAME_CNT): Delete, replace uses with ARRAY_SIZE. (register_name): Rename to.. (md_operand): ..this. Only handle %reg. (cr_names): Rename to.. (cr_cond): ..this. Just keep conditions. (ppc_parse_name): Add mode param. Search both cr_cond and pre_defined_registers. Handle absolute and register symbol values here rather than in expr.c:operand(). (md_assemble): Don't special case register name matching in operands, except to set cr_operand as appropriate. * gas/config/tc-ppc.h (md_operand): Don't define. (md_parse_name, ppc_parse_name): Update. * read.c (pseudo_set): Copy over entire O_register value. * testsuite/gas/ppc/regsyms.d. * testsuite/gas/ppc/regsyms.s: New test. * testsuite/gas/ppc/ppc.exp: Run it. 2022-07-14 GDB Administrator Automatic date update in version.in 2022-07-13 Pedro Alves Tighten gdb.threads/no-unwaited-for-left.exp regexps A WIP version of a patch (https://sourceware.org/pipermail/gdb-patches/2022-June/190202.html) resulted in a bug that went unnoticed by the testuite, like so: (gdb) PASS: gdb.threads/no-unwaited-for-left.exp: enable scheduler-locking, for main thread continue Continuing. [New Thread 1251861.1251861] No unwaited-for children left. (gdb) PASS: gdb.threads/no-unwaited-for-left.exp: continue stops when the main thread exits info threads Id Target Id Frame 3 Thread 1251861.1251863 "no-unwaited-for" __pthread_clockjoin_ex (threadid=140737351558976, thread_return=0x0, clockid=, abstime=, block=) at pthread_join_common.c:145 4 Thread 1251861.1251861 "no-unwaited-for" in ?? () The current thread has terminated. See `help thread'. (gdb) PASS: gdb.threads/no-unwaited-for-left.exp: only thread 3 left, main thread terminated Somehow, above, GDB re-added the zombie leader back before printing "No unwaited-for children left.". The "only thread 3 left, main thread terminated" test should have caught this, but didn't. That is because the test's regexp has a ".*" after the part that matches thread 3. This commit tightens that regexp to catch such a bug. It also tightens the "only main thread left, thread 2 terminated" test's regexp in the same way. Change-Id: I8744f327a0aa0e2669d1ddda88247e99b91cefff 2022-07-13 Carl Love Fix for gdb.base/stap-probe.c On PowePC, the test fails on a compile error: /../binutils-gdb-current/gdb/testsuite/gdb.base/stap-probe.c:107:1: error: expected '=', ',', ';', 'asm' or 'attribute' before 'use_xmm_reg' 107 | use_xmm_reg (int val) | ^~~~~~~~~~~ Where the source code for stap-probe.c is: static const char * __attribute__((noinline)) ATTRIBUTE_NOCLONE use_xmm_reg (int val) <-- line 107 { ... The issue is the ATTRIBUTE_NOCLONE is not defined as an attribute as expected. The #define for ATTRIBUTE_NOCLONE can be found in ../lib/attributes.h. This patch adds the missing include statement for the definition of ATTRIBUTE_NOCLONE. The patch has been tested and verified on a Power10 system. 2022-07-13 Carl Love Add PowerPC support to gdb.cp/call-method-register.cc This patch adds the needed define ASM_REG for PowerPC. The patch was run on a Power 10 system. The gdb Summary for the run lists 2 expected passes, no unexpected failures or untested testcases. Please let me know if this patch is acceptable for mainline. Carl Love 2022-07-13 Carl Love Fix gdb.base/step-indirect-call-thunk.exp Due to recent changes in the default value of -fcf-protection for gcc, the test gdb.base/step-indirect-call-thunk.exp fails on Intel X86-64 with the error: Executing on host: gcc -fno-stack-protector -fdiagnostics-color=never -mindirect-branch=thunk -mfunction-return=thunk -c -g -o /.../gdb/testsuite/outputs/gdb.base/step-indirect-call-thunk/step-indirect-call-thunk0.o /.../gdb/testsuite/gdb.base/step-indirect-call-thunk.c (timeout = 300) builtin_spawn -ignore SIGHUP gcc -fno-stack-protector -fdiagnostics-color=never -mindirect-branch=thunk -mfunction-return=thunk -c -g -o /.../gdb/testsuite/outputs/gdb.base/step-indirect-call-thunk/step-indirect-call-thunk0.o /.../binutils-gdb-current/gdb/testsuite/gdb.base/step-indirect-call-thunk.c /.../gdb/testsuite/gdb.base/step-indirect-call-thunk.c: In function 'inc': /.../gdb/testsuite/gdb.base/step-indirect-call-thunk.c: 22:1: error: '-mindirect-branch' and '-fcf-protection' are not compatible 22 | { /* inc.1 */ As stated in the error message the default "-fcf-protection" and "-mindirect-branch' are in compatible. The fcf-protection argument needs to be "-fcf-protection=none" for the test to compile on Intel. The gcc command line "-mindirect-branch' is an Intel specific and will give an error on other platforms. A check for X86 is added so the test will only run on X86 platforms. The patch has been tested and verified on Power 10 and Intel X86-64 systems with no regressions. 2022-07-13 Pedro Alves Fix "until LINE" in main, when "until" runs into longjmp With a test like this: 1 #include 2 int 3 main () 4 { 5 dlsym (RTLD_DEFAULT, "FOO"); 6 return 0; 7 } and then "start" followed by "until 6", GDB currently incorrectly stops inside the runtime loader, instead of line 6. Vis: ... Temporary breakpoint 1, main () at until.c:5 4 { (gdb) until 6 0x00007ffff7f0a90d in __GI__dl_catch_exception (exception=exception@entry=0x7fffffffdb00, operate=, args=0x7ffff7f0a90d <__GI__dl_catch_exception+109>) at dl-error-skeleton.c:206 206 dl-error-skeleton.c: No such file or directory. (gdb) The problem is related to longjmp handling -- dlsym internally longjmps on error. The testcase can be reduced to this: 1 #include 2 void func () { 3 jmp_buf buf; 4 if (setjmp (buf) == 0) 5 longjmp (buf, 1); 6 } 7 8 int main () { 9 func (); 10 return 0; /* until to here */ 11 } and then with "start" followed by "until 10", GDB currently incorrectly stops at line 4 (returning from setjmp), instead of line 10. The problem is that the BPSTAT_WHAT_CLEAR_LONGJMP_RESUME code in infrun.c fails to find the initiating frame, and so infrun thinks that the longjmp jumped somewhere outer to "until"'s originating frame. Here: case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME: { struct frame_info *init_frame; /* There are several cases to consider. 1. The initiating frame no longer exists. In this case we must stop, because the exception or longjmp has gone too far. ... init_frame = frame_find_by_id (ecs->event_thread->initiating_frame); if (init_frame) // this is NULL! { ... } /* For Cases 1 and 2, remove the step-resume breakpoint, if it exists. */ delete_step_resume_breakpoint (ecs->event_thread); end_stepping_range (ecs); // case 1., so we stop. } The initiating frame is set by until_break_command -> set_longjmp_breakpoint. The initiating frame is supposed to be the frame that is selected when the command was issued, but until_break_command instead passes the frame id of the _caller_ frame by mistake. When the "until LINE" command is issued from main, the caller frame is the caller of main. When later infrun tries to find that frame by id, it fails to find it, because frame_find_by_id doesn't unwind past main. The bug is that we passed the caller frame's id to set_longjmp_breakpoint. We should have passed the selected frame's id instead. Change-Id: Iaae1af7cdddf296b7c5af82c3b5b7d9b66755b1c 2022-07-13 Enze Li gdbserver: remove unused variable When building with clang 15, I got this error: CXX server.o server.cc:2985:10: error: variable 'new_argc' set but not used [-Werror,-Wunused-but-set-variable] int i, new_argc; ^ Remove the unused variable to eliminate the error. Tested by rebuilding on x86_64-linux with clang 15. 2022-07-13 Tom de Vries [gdb/symtab] Make per_cu->set_lang more strict We have in per_cu->set_lang this comment: ... void set_lang (enum language lang) { /* We'd like to be more strict here, similar to what is done in set_unit_type, but currently a partial unit can go from unknown to minimal to ada to c. */ ... Fix this by not setting m_lang for partial units. This requires us to move the m_unit_type initialization to ensure that m_unit_type is initialized before per_cu->m_lang. Tested on x86_64-linux, with native and target board cc-with-dwz-m. 2022-07-13 GDB Administrator Automatic date update in version.in 2022-07-12 Pedro Alves Improve "set scheduler-locking" documentation This improves the "set scheduler-locking" documentation in the GDB manual: - Use a table to describe the four available modes. - Describe "step" in terms of "on" and "off". - Tweak the "replay" mode's description to describe replay first instead of recording, and also mention how the mode behaves during normal execution. - Say what is the default mode. Change-Id: Ie12140138b37534b7fc1d904da34f0f174aa11ce 2022-07-12 Tom de Vries [gdb/symtab] Add dwarf2_cu::lang () The cu->per_cu->lang field was added to carry information from the initial partial symtabs phase to the symtab expansion phase, for the benefit of a particular optimization in process_imported_unit_die. Other uses have been added, but since the first phase now has been parallelized, those have become problematic and sources of race conditions. Fix this by adding dwarf2_cu::lang () and using it where we can to replace cu->per_cu->lang () with cu->lang (). Also assert in dwarf2_cu::lang () that we're not returning language_unknown. Tested on x86_64-linux. 2022-07-12 Martin Liska LTO plugin: sync header file with GCC include/ChangeLog: * plugin-api.h (enum ld_plugin_tag): Sync with GCC. 2022-07-12 Tom de Vries [gdb/record] Support recording of getrandom Add missing support for recording of linux syscall getrandom. Tested on x86_64-linux with native and target board unix/-m32. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22081 2022-07-12 Tiezhu Yang gdbserver: LoongArch: Add floating-point support This commit adds floating-point support for LoongArch gdbserver. gdb: LoongArch: Add floating-point support This commit adds floating-point support for LoongArch gdb. 2022-07-12 Tom de Vries [gdb/testsuite] Run two test-cases with ASAN_OPTIONS=verify_asan_link_order=0 When building gdb with -fsanitize=address we run into: ... builtin_spawn gdb -nw -nx -iex set height 0 -iex set width 0 -data-directory \ build/gdb/data-directory^M ==10637==ASan runtime does not come first in initial library list; you \ should either link runtime to your application or manually preload it with \ LD_PRELOAD.^M ERROR: GDB process no longer exists ... Prevent the ASan runtime error by using ASAN_OPTIONS=verify_asan_link_order=0. This makes both test-cases pass. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29358 2022-07-12 Tom de Vries [gdb/testsuite] Add tsan-suppressions.txt Add a new file tsan-suppressions.txt, to suppress the "unlock unlocked mutex" problem in ncurses, filed in PR29328. The file is added to the TSAN_OPTIONS in lib/gdb.exp. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29328 2022-07-12 Tom de Vries [gdb/build] Fix build with gcc 4.8.5 When building gdb with gcc 4.8.5, we run into problems due to unconditionally using: ... gdb_static_assert (std::is_trivially_copyable::value); ... in gdbsupport/packed.h. Fix this by guarding the usage with HAVE_IS_TRIVIALLY_COPYABLE. Tested by doing a full gdb build with gcc 4.8.5. 2022-07-12 Tom de Vries Fix -fsanitize=thread for per_cu fields When building gdb with -fsanitize=thread and gcc 12, and running test-case gdb.dwarf2/dwz.exp, we run into a data race between: ... Read of size 1 at 0x7b200000300d by thread T2:^M #0 cutu_reader::cutu_reader(dwarf2_per_cu_data*, dwarf2_per_objfile*, \ abbrev_table*, dwarf2_cu*, bool, abbrev_cache*) gdb/dwarf2/read.c:6164 \ (gdb+0x82ec95)^M ... and: ... Previous write of size 1 at 0x7b200000300d by main thread:^M #0 prepare_one_comp_unit gdb/dwarf2/read.c:23588 (gdb+0x86f973)^M ... In other words, between: ... if (this_cu->reading_dwo_directly) ... and: ... cu->per_cu->lang = pretend_language; ... Likewise, we run into a data race between: ... Write of size 1 at 0x7b200000300e by thread T4: #0 process_psymtab_comp_unit gdb/dwarf2/read.c:6789 (gdb+0x830720) ... and: ... Previous read of size 1 at 0x7b200000300e by main thread: #0 cutu_reader::cutu_reader(dwarf2_per_cu_data*, dwarf2_per_objfile*, \ abbrev_table*, dwarf2_cu*, bool, abbrev_cache*) gdb/dwarf2/read.c:6164 \ (gdb+0x82edab) ... In other words, between: ... this_cu->unit_type = DW_UT_partial; ... and: ... if (this_cu->reading_dwo_directly) ... Likewise for the write to addresses_seen in cooked_indexer::check_bounds and a read from is_dwz in dwarf2_find_containing_comp_unit for test-case gdb.dwarf2/dw2-dir-file-name.exp and target board cc-with-dwz-m. The problem is that the written fields are part of the same memory location as the read fields, so executing a read and write in different threads is undefined behavour. Making the written fields separate memory locations, using the new struct packed template fixes this. The set of fields has been established experimentally to be the minimal set to get rid of this type of -fsanitize=thread errors, but more fields might require the same treatment. Looking at the properties of the lang field, unlike dwarf_version it's not available in the unit header, so it will be set the first time during the parallel cooked index reading. The same holds for unit_type, and likewise for addresses_seen. dwarf2_per_cu_data::addresses_seen is moved so that the bitfields that currently follow it can be merged in the same memory location as the bitfields that currently precede it, for better packing. Tested on x86_64-linux. Co-Authored-By: Pedro Alves Change-Id: Ifa94f0a2cebfae5e8f6ddc73265f05e7fd9e1532 2022-07-12 Pedro Alves Introduce struct packed template When building gdb with -fsanitize=thread and gcc 12, and running test-case gdb.dwarf2/dwz.exp, we run into a few data races. For example, between: ... Write of size 1 at 0x7b200000300e by thread T4: #0 process_psymtab_comp_unit gdb/dwarf2/read.c:6789 (gdb+0x830720) ... and: ... Previous read of size 1 at 0x7b200000300e by main thread: #0 cutu_reader::cutu_reader(dwarf2_per_cu_data*, dwarf2_per_objfile*, \ abbrev_table*, dwarf2_cu*, bool, abbrev_cache*) gdb/dwarf2/read.c:6164 \ (gdb+0x82edab) ... In other words, between: ... this_cu->unit_type = DW_UT_partial; ... and: ... if (this_cu->reading_dwo_directly) ... The problem is that the written fields are part of the same memory location as the read fields, so executing a read and write in different threads is undefined behavour. Making the written fields separate memory locations, like this: ... struct { ENUM_BITFIELD (dwarf_unit_type) unit_type : 8; }; ... fixes it, however that also increases the size of struct dwarf2_per_cu_data, because it introduces padding due to alignment of these new structs, which align on the natural alignment of the specified type of their fields. We can fix that with __attribute__((packed)), like so: struct { ENUM_BITFIELD (dwarf_unit_type) unit_type : 8 __attribute__((packed)); }; but to avoid having to write that in several places and add suitable comments explaining how that concoction works, introduce a new struct packed template that wraps/hides this. Instead of the above, we'll be able to write: packed unit_type; Note that we can't change the type of dwarf_unit_type, as that is defined in include/, and shared with other projects, some of those written in C. This patch just adds the struct packed type. Following patches will make use of it. One of those patches will want to wrap a struct packed in an std::atomic, like: std::atomic> m_lang; so the new gdbsupport/packed.h header adds some operators to make comparisions between that std::atomic and the type that the wrapped struct packed wraps work, like in: if (m_lang == language_c) It would be possible to implement struct packed without using __attribute__((packed)), by having it store an array of bytes of the appropriate size instead, however that would make it less convenient to debug GDB. The way it's implemented, printing a struct packed variable just prints its field using its natural type, which is particularly useful if the type is an enum. I believe that __attribute__((packed)) is supported by all compilers that are able to build GDB. Even a few BFD headers use on ATTRIBUTE_PACKED on external types: include/coff/external.h: } ATTRIBUTE_PACKED include/coff/external.h:} ATTRIBUTE_PACKED ; include/coff/external.h:} ATTRIBUTE_PACKED ; include/coff/pe.h:} ATTRIBUTE_PACKED ; include/coff/pe.h:} ATTRIBUTE_PACKED; include/elf/external.h:} ATTRIBUTE_PACKED Elf_External_Versym; It is not possible to build GDB with MSVC today, but if it could, that would be one compiler that doesn't support this attribute. However, it supports packing via pragmas, so there's a way to cross that bridge if we ever get to it. I believe any compiler worth its salt supports some way of packing. In any case, the worse that happens without the attribute is that some types become larger than ideal. Regardless, I've added a couple static assertions to catch such compilers in action: /* Ensure size and aligment are what we expect. */ gdb_static_assert (sizeof (packed) == Bytes); gdb_static_assert (alignof (packed) == 1); Change-Id: Ifa94f0a2cebfae5e8f6ddc73265f05e7fd9e1532 2022-07-12 Alan Modra PowerPC md_end: Don't htab_delete(NULL) It might be possible to hit md_end before md_begin is called, don't segfault if so. Also, remove a useless check. * gas/config/tc-ppc.c (insn_calloc): Remove needless overflow check. (ppc_md_end): Check ppc_hash before deleting. Clear ppc_hash. 2022-07-12 Alan Modra PR29355, ld segfaults with -r/-q and custom-named section .rela* The bug testcase uses an output section named .rel or .rela which has input .data sections mapped to it. The input .data section has relocations. When counting output relocations SHT_REL and SHT_RELA section reloc_count is ignored, with the justification that reloc sections themselves can't have relocations and some backends use reloc_count in reloc sections. However, the test wrongly used the output section type (which normally would match input section type). Fix that. Note that it is arguably wrong for ld to leave the output .rel/.rela section type as SHT_REL/SHT_RELA when non-empty non-reloc sections are written to it, but I'm not going to change that since it might be useful to hand-craft relocs in a data section that is then written to a SHT_REL/SHT_RELA output section. PR 29355 * elflink.c (bfd_elf_final_link): Use input section type rather than output section type to determine whether to exclude using reloc_count from that section. 2022-07-12 Jiangshuai Li gdb/csky complete csky_dwarf_reg_to_regnum For csky arch, the correspondence between Dwarf registers and GDB registers are as follows: dwarf regnos 0~31 ==> gdb regs r0~r31 dwarf regno CSKY_HI_REGNUM(36) ==> gdb reg hi dwarf regno CSKY_LO_REGNUM(37) ==> gdb reg hi dwarf regno CSKY_PC_REGNUM(72) ==> gdb reg pc dwarf regnos FV_PSEUDO_REGNO_FIRST(74)~FV_PSEUDO_REGNO_LAST(201) ==> gdb regs s0~s127 (pseudo regs for float and vector regs) other dwarf regnos have no corresponding gdb regs to them. 2022-07-12 GDB Administrator Automatic date update in version.in 2022-07-11 Pedro Alves Always emit =thread-exited notifications, even if silent [Note: the testcased added by this commit depends on https://sourceware.org/pipermail/gdb-patches/2022-June/190259.html, otherwise GDB just crashes when detaching the core] Currently, in MI, =thread-created are always emitted, like: =thread-group-started,id="i1",pid="195680" =thread-created,id="1",group-id="i1" ... but on teardown, if the target uses exit_inferior_silent, then you'll only see the inferior exit notification (thread-group-exited), no notification for threads. The core target is one of the few targets that use exit_inferior_silent. Here's an example session: -target-select core $corefile =thread-group-started,id="i1",pid="195680" =thread-created,id="1",group-id="i1" ... ^connected,frame=.... (gdb) -target-detach =thread-group-exited,id="i1" ^done (gdb) This imbalance of emitting =thread-created but then not =thread-exited seems off to me. (And, it complicates changes I want to do to centralize emitting thread exit notifications for the CLI, which is why I'm looking at this.) And then, since most other targets use exit_inferior instead of exit_inferior_silent, MI is already emitting =thread-exited notifications when tearing down an inferior, for most targets. This commit makes MI always emit the =thread-exited notifications, even for exit_inferior_silent. Afterwards, when debugging a core, MI outputs: (gdb) -target-detach =thread-exited,id="1",group-id="i1" << new line =thread-group-exited,id="i1" ^done (gdb) Surprisingly, there's no MI testcase debugging a core file. This commit adds the first. Change-Id: I5100501a46f07b6bbad3e04d120c2562a51c93a4 2022-07-11 Pedro Alves Fix core-file -> detach -> crash (corefiles/29275) After loading a core file, you're supposed to be able to use "detach" to unload the core file. That unfortunately regressed starting with GDB 11, with these commits: 1192f124a308 - gdb: generalize commit_resume, avoid commit-resuming when threads have pending statuses 408f66864a1a - detach in all-stop with threads running resulting in a GDB crash: ... Thread 1 "gdb" received signal SIGSEGV, Segmentation fault. 0x0000555555e842bf in maybe_set_commit_resumed_all_targets () at ../../src/gdb/infrun.c:2899 2899 if (proc_target->commit_resumed_state) (top-gdb) bt #0 0x0000555555e842bf in maybe_set_commit_resumed_all_targets () at ../../src/gdb/infrun.c:2899 #1 0x0000555555e848bf in scoped_disable_commit_resumed::reset (this=0x7fffffffd440) at ../../src/gdb/infrun.c:3023 #2 0x0000555555e84a0c in scoped_disable_commit_resumed::reset_and_commit (this=0x7fffffffd440) at ../../src/gdb/infrun.c:3049 #3 0x0000555555e739cd in detach_command (args=0x0, from_tty=1) at ../../src/gdb/infcmd.c:2791 #4 0x0000555555c0ba46 in do_simple_func (args=0x0, from_tty=1, c=0x55555662a600) at ../../src/gdb/cli/cli-decode.c:95 #5 0x0000555555c112b0 in cmd_func (cmd=0x55555662a600, args=0x0, from_tty=1) at ../../src/gdb/cli/cli-decode.c:2514 #6 0x0000555556173b1f in execute_command (p=0x5555565c5916 "", from_tty=1) at ../../src/gdb/top.c:699 The code that crashes looks like: static void maybe_set_commit_resumed_all_targets () { scoped_restore_current_thread restore_thread; for (inferior *inf : all_non_exited_inferiors ()) { process_stratum_target *proc_target = inf->process_target (); if (proc_target->commit_resumed_state) ^^^^^^^^^^^ With 'proc_target' above being null. all_non_exited_inferiors filters out inferiors that have pid==0. We get here at the end of detach_command, after core_target::detach has already run, at which point the inferior _should_ have pid==0 and no process target. It is clear it no longer has a process target, but, it still has a pid!=0 somehow. The reason the inferior still has pid!=0, is that core_target::detach just unpushes, and relies on core_target::close to actually do the getting rid of the core and exiting the inferior. The problem with that is that detach_command grabs an extra strong reference to the process stratum target, so the unpush_target inside core_target::detach doesn't actually result in a call to core_target::close. Fix this my moving the cleaning up the core inferior to a shared routine called by both core_target::close and core_target::detach. We still need to cleanup the inferior from within core_file::close because there are paths to it that want to get rid of the core without going through detach. E.g., "core-file" -> "run". This commit includes a new test added to gdb.base/corefile.exp to cover the "core-file core" -> "detach" scenario. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29275 Change-Id: Ic42bdd03182166b19f598428b0dbc2ce6f67c893 2022-07-11 Pedro Alves Fix non-existent "@var{thread-id}" in stop reply descriptions In the description of stop replies, where the "thread" register is explained, and where the fork and vfork stop reasons are detailed, there are references to "@var{thread-id}", but such variable does not actually exist. This commit fixes it. Change-Id: If679944aaf15f6f64aabe506339a9e7667864cab 2022-07-11 Luis Machado Try a couple PAuth compilation flags for gdb.arch/aarch64-pauth.exp The -msign-return-address switch has been dropped from GCC, but some older compiler may still support it. Make sure we try both -msign-return-address and -mbranch-protection before bailing out when running gdb.arch/aarch64-pauth.exp. 2022-07-11 Andrew Burgess gdb: add support for disassembler styling using libopcodes This commit extends GDB to make use of libopcodes styling support where available, currently this is just i386 based architectures, and RISC-V. For architectures that don't support styling using libopcodes GDB will fall back to using the Python Pygments package, when the package is available. The new libopcodes based styling has the disassembler identify parts of the disassembled instruction, e.g. registers, immediates, mnemonics, etc, and can style these components differently. Additionally, as the styling is now done in GDB we can add settings to allow the user to configure which colours are used right from the GDB CLI. There's some new maintenance commands: maintenance set libopcodes-styling enabled on|off maintenance show libopcodes-styling These can be used to manually disable use of libopcodes styling. This is a maintenance command as it's not anticipated that a user should need to do this. But, this could be useful for testing, or, in some rare cases, a user might want to override the Python hook used for disassembler styling, and then disable libopcode styling so that GDB falls back to using Python. Right now I would consider this second use case a rare situation, which is why I think a maintenance command is appropriate. When libopcodes is being used for styling then the user can make use of the following new styles: set/show style disassembler comment set/show style disassembler immediate set/show style disassembler mnemonic set/show style disassembler register The disassembler also makes use of the 'address' and 'function' styles to style some parts of the disassembler output. I have also added the following aliases though: set/show style disassembler address set/show style disassembler symbol these are aliases for: set/show style address set/show style function respectively, and exist to make it easier for users to discover disassembler related style settings. The 'address' style is used to style numeric addresses in the disassembler output, while the 'symbol' or 'function' style is used to style the names of symbols in disassembler output. As not every architecture supports libopcodes styling, the maintenance setting 'libopcodes-styling enabled' has an "auto-off" type behaviour. Consider this GDB session: (gdb) show architecture The target architecture is set to "auto" (currently "i386:x86-64"). (gdb) maintenance show libopcodes-styling enabled Use of libopcodes styling support is "on". the setting defaults to "on" for architectures that support libopcodes based styling. (gdb) set architecture sparc The target architecture is set to "sparc". (gdb) maintenance show libopcodes-styling enabled Use of libopcodes styling support is "off" (not supported on architecture "sparc") the setting will show as "off" if the user switches to an architecture that doesn't support libopcodes styling. The underlying setting is still "on" at this point though, if the user switches back to i386:x86-64 then the setting would go back to being "on". (gdb) maintenance set libopcodes-styling enabled off (gdb) maintenance show libopcodes-styling enabled Use of libopcodes styling support is "off". now the setting is "off" for everyone, even if the user switches back to i386:x86-64 the setting will still show as "off". (gdb) maintenance set libopcodes-styling enabled on Use of libopcodes styling not supported on architecture "sparc". (gdb) maintenance show libopcodes-styling enabled Use of libopcodes styling support is "off". attempting to switch the setting "on" for an unsupported architecture will give an error, and the setting will remain "off". (gdb) set architecture auto The target architecture is set to "auto" (currently "i386:x86-64"). (gdb) maintenance show libopcodes-styling enabled Use of libopcodes styling support is "off". (gdb) maintenance set libopcodes-styling enabled on (gdb) maintenance show libopcodes-styling enabled Use of libopcodes styling support is "on". the user will need to switch back to a supported architecture before they can one again turn this setting "on". 2022-07-11 Andrew Burgess gdb: have gdb_disassemble_info carry 'this' in its stream pointer The gdb_disassemble_info class is a wrapper around the libopcodes disassemble_info struct. The 'stream' field of disassemble_info is passed as an argument to the fprintf_func and fprintf_styled_func callbacks when the disassembler wants to print anything. Previously, GDB would store a pointer to a ui_file object in the 'stream' field, then, when the disassembler wanted to print anything, the content would be written to the ui_file object. An example of an fprintf_func callback, from gdb/disasm.c is: int gdb_disassembler::dis_asm_fprintf (void *stream, const char *format, ...) { /* Write output to STREAM here. */ } This is fine, but has one limitation, within the print callbacks we only have access to STREAM, we can't access any additional state stored within the gdb_disassemble_info object. Right now this isn't a problem, but in a future commit this will become an issue, how we style the output being written to STREAM will depend on the state of the gdb_disassemble_info object, and this state might need to be updated, depending on what is being printed. In this commit I propose changing the 'stream' field of the disassemble_info to carry a pointer to the gdb_disassemble_info sub-class, rather than the stream itself. We then have the two sub-classes of gdb_disassemble_info to consider, the gdb_non_printing_disassembler class never cared about the stream, previously, for this class, the stream was nullptr. With the change to make stream be a gdb_disassemble_info pointer, no further updates are needed for gdb_non_printing_disassembler. The other sub-class is gdb_printing_disassembler. In this case the sub-class now carries around a pointer to the stream object. The print callbacks are updated to cast the incoming stream object back to a gdb_printing_disassembler, and then extract the stream. This is purely a refactoring commit. A later commit will add additional state to the gdb_printing_disassembler, and update the print callbacks to access this state. There should be no user visible changes after this commit. 2022-07-11 Tom de Vries [gdb/symtab] Fix data race in per_cu->length With gdb build with -fsanitize=thread and test-case gdb.dwarf2/dw4-sig-types.exp and target board cc-with-dwz-m we run into a data race between: ... Write of size 4 at 0x7b2800002268 by thread T4:^M #0 cutu_reader::cutu_reader(dwarf2_per_cu_data*, dwarf2_per_objfile*, \ abbrev_table*, dwarf2_cu*, bool, abbrev_cache*) gdb/dwarf2/read.c:6236 \ (gdb+0x82f525)^M ... and this read: ... Previous read of size 4 at 0x7b2800002268 by thread T1:^M #0 dwarf2_find_containing_comp_unit gdb/dwarf2/read.c:23444 \ (gdb+0x86e22e)^M ... In other words, between this write: ... this_cu->length = cu->header.get_length (); ... and this read: ... && mid_cu->sect_off + mid_cu->length > sect_off)) ... of per_cu->length. Fix this similar to the per_cu->dwarf_version case, by only setting it if needed, and otherwise verifying that the same value is used. [ Note that the same code is already present in the other cutu_reader constructor. ] Move this logic into into a member function set_length to make sure it's used consistenly, and make the field private in order to enforce access through the member functions, and rename it to m_length. This exposes (running test-case gdb.dwarf2/fission-reread.exp) that in fill_in_sig_entry_from_dwo_entry, the m_length field is overwritten. For now, allow for that exception. While we're at it, make sure that the length is set before read. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29344 2022-07-11 Tom de Vries [gdb/symtab] Use comp_unit_head::get_length There's a spot in read_comp_units_from_section where we explictly use initial_length_size to get the total length: ... this_cu->length = cu_header.length + cu_header.initial_length_size; ... Instead, just use cu_header.get_length (). Tested on x86_64-linux. 2022-07-11 GDB Administrator Automatic date update in version.in 2022-07-10 Luis Machado Fix include guard naming for arch/aarch64-mte-linux.h It should be ARCH_AARCH64_MTE_LINUX_H as opposed to ARCH_AARCH64_LINUX_H. 2022-07-10 Youling Tang gdbserver: LoongArch: Add orig_a0 processing Commit 736918239b16 ("gdb: LoongArch: add orig_a0 into register set") introduced orig_a0, similar processing needs to be done in gdbserver. At the same time, add orig_a0 related comments. 2022-07-10 Youling Tang gdbserver: LoongArch: Simplify code with register number macros Move "enum loongarch_regnum" to gdb/arch/loongarch.h so that the macro definitions can be used in gdbserver/linux-loongarch-low.cc to simplify the code. 2022-07-10 GDB Administrator Automatic date update in version.in 2022-07-09 Alan Modra gas: tc-tic54x.c hash tables Cleaning up the subsym_hash memory is a real pain. Keys and values entered into the table are quite diverse. In some cases the key is allocated and thus needs to be freed, in others the key is a const string. Values are similar, and in some cases not even a string. Tidy this by inserting a new subsym_ent_t that describes key/value type. This meant the math_hash table was no longer needed. The patch also tidies how math functions are called, those that are supposed to return int now no longer return their value in a float. * config/tc-tic54x.c (math_hash): Delete. (subsym_proc_entry): Move earlier, make proc a union, merge with.. (math_proc_entry): ..this. Delete type. (math_procs): Merge into subsym_procs. (subsym_ent_t): New. Use this type in subsym_hash.. (stag_add_field_symbols, tic54x_var, tic54x_macro_info): ..here.. (md_begin, subsym_create_or_replace, subsym_lookup): ..and here.. (subsym_substitute): ..and here. Adjust subsym_proc_entry function calls. Free replacement when not returned. (subsym_get_arg): Adjust subsym_lookup. (free_subsym_ent, subsym_htab_create ): New functions, use when creating subsym_hash. (free_local_label_ent, local_label_htab_create): Similarly. (tic54x_remove_local_label): Delete. (tic54x_clear_local_labels): Simplify. (tic54x_asg): Use notes obstack to dup strings. (tic54x_eval): Likewise. (subsym_ismember): Likewise. (math_cvi, math_int, math_sgn): Return int. (tic54x_macro_start): Decrement macro_level before calling as_fatal. (tic54x_md_end): New function. * config/tc-tic54h.c (tic54x_md_end): Declare. (md_end): Define. 2022-07-09 Alan Modra gas: use notes_calloc in string hash Using notes_calloc means all of the string hash table memory should now be freed before gas exits, even though htab_delete isn't called. This also means that the hash table free_f and del_f must be NULL, because freeing notes obstack memory results in all more recently allocated notes memory being freed too. So hash table resizing won't free any memory, and will be a little faster. Also, htab_delete won't do anything (and be quick about it). Since htab_traverse can also resize hash tables (to make another traversal faster if the table is largely empty), stop that happening when only one traversal is done. * as.h: Reorder hash.h after symbols.h for notes_calloc decl. * hash.h (str_htab_create): Use notes_calloc. Do not free. * symbols.c (resolve_local_symbol_values): Don't resize during hash table traversal. * config/obj-elf.c (elf_frob_file_after_relocs): Likewise. * config/tc-ia64.c (ia64_adjust_symtab, ia64_frob_file): Likewise. * config/tc-nds32.c (nds32_elf_analysis_relax_hint): Likewise. 2022-07-09 Alan Modra gas: target string hash tables This allocates entries added to the string hash tables on the notes obstack, so that at least those do not leak. A followup patch will switch over the str_hash allocation to notes_calloc, which is why I haven't implemented deleting all the target string hash tables. * config/obj-coff-seh.c (get_pxdata_name, alloc_pxdata_item): Use notes obstack for string hash table entries. * config/tc-alpha.c (get_alpha_reloc_tag, md_begin): Likewise. * config/tc-h8300.c (md_begin): Likewise. * config/tc-ia64.c (dot_rot, dot_pred_rel, dot_alias): Likewise. * config/tc-nds32.c (nds32_relax_hint): Likewise. * config/tc-riscv.c (riscv_init_csr_hash): Likewise. * config/tc-score.c (s3_insert_reg): Likewise. (s3_build_score_ops_hsh, s3_build_dependency_insn_hsh): Likewise. * config/tc-score7.c (s7_build_score_ops_hsh): Likewise. (s7_build_dependency_insn_hsh): Likewise. * config/tc-tic4x.c (tic4x_asg): Likewise. 2022-07-09 Alan Modra arc gas: don't leak arc_opcode_hash memory The arc opcode hash table has entries that have a realloc'd field. This doesn't lend itself to obstack allocation, so freeing must be done with a purpose built hashtab del_f. * config/tc-arc.c (arc_opcode_free): New function. (md_begin): Pass the above as del_f to htab_create_alloc. (arc_md_end): New function. * config/tc-arc.h (arc_md_end): Declare. (md_end): Define. 2022-07-09 Alan Modra i386 gas: don't leak op_hash or reg_hash memory This tidies memory used by the two x86 gas string hash tables before exiting. I'm using a two-pronged approach, firstly the obvious call to htab_delete plus telling the libiberty/hashtab.c infrastructure to free tuples generated by str_hash_insert, and secondly putting the x86 core_optab memory on the notes obstack. It would be possible to free core_optab memory by using a custom hash table del_f on x86, as I do for arc, but a later patch will move all the string hash memory to the notes obstack. * config/tc-i386.c (md_begin): Use notes_alloc for core_optab. (386_md_end): New function. * config/tc-i386.h (386_md_end): Declare. (md_end): Define. * hash.h (str_htab_create): Pass free as del_f. 2022-07-09 Alan Modra ppc gas: don't leak ppc_hash memory * config/tc-ppc.c (insn_obstack): New. (insn_calloc): New function. (ppc_setup_opcodes): Use insn_obstack for ppc_hash. (ppc_md_end): New function. * config/tc-ppc.h (ppc_md_end): Declare (md_end): Define. 2022-07-09 Alan Modra gas hash.h tidy Only inline functions should be defined in hash.h, there's no benefit in having multiple copies of hash_string_tuple and eq_string_tuple. Also, use the table alloc_f when allocating tuples to be stored, so that these functions are usable with different memory allocation strategies. * hash.h (struct string_tuple, string_tuple_t): Move earlier. (string_tuple_alloc): Add table param, allocate using table alloc_f. (str_hash_insert): Adjust to suit. Call table->free_f when entry is not used. (hash_string_tuple, eq_string_tuple): Move to.. * hash.c: ..here. 2022-07-09 Alan Modra gas: rename md_end to md_finish Currently md_end is typically used for some final actions rather than freeing memory like other *_end functions. Rename it to md_finish, and rename target implementation. The renaming of target functions makes it possible to find them all with "grep md_finish", eg. md_mips_end is renamed to mips_md_finish, not md_mips_finish. This patch leaves a number of md_end functions unchanged, those that either do nothing or deallocate memory, and calls them late. The idea here is that target maintainers implement md_end functions to tidy memory, if anyone cares. Freeing persistent memory in gas is not at all important, except that it can hide more important memory leaks, those that happen once per some frequent gas operation, amongst these unimportant memory leaks. * as.c (main): Rename md_end to md_finish. * config/tc-alpha.c, * config/tc-alpha.h, * config/tc-arc.c, * config/tc-arc.h, * config/tc-arm.c, * config/tc-arm.h, * config/tc-csky.c, * config/tc-csky.h, * config/tc-ia64.c, * config/tc-ia64.h, * config/tc-mcore.c, * config/tc-mcore.h, * config/tc-mips.c, * config/tc-mips.h, * config/tc-mmix.c, * config/tc-mmix.h, * config/tc-msp430.c, * config/tc-msp430.h, * config/tc-nds32.c, * config/tc-nds32.h, * config/tc-ppc.c, * config/tc-ppc.h, * config/tc-pru.c, * config/tc-pru.h, * config/tc-riscv.c, * config/tc-riscv.h, * config/tc-s390.c, * config/tc-s390.h, * config/tc-sparc.c, * config/tc-sparc.h, * config/tc-tic4x.c, * config/tc-tic4x.h, * config/tc-tic6x.c, * config/tc-tic6x.h, * config/tc-v850.c, * config/tc-v850.h, * config/tc-xtensa.c, * config/tc-xtensa.h, * config/tc-z80.c, * config/tc-z80.h: Similarly. * output-file.c (output_file_close): Call md_end. 2022-07-09 Alan Modra gas: set up notes obstack earlier So that the notes obstack can be used for persistent storage in parse_args. * as.c (parse_args): Use notes_alloc and notes_strdup. (free_notes): New function. (main): Init notes obstack, and arrange to be freed on exit. * read.c (read_begin): Don't init notes obstack. (read_end): Free cond_obstack. * subsegs.c (subsegs_end): Don't free cond_obstack or notes. 2022-07-09 Alan Modra gas: itbl_files itbl_files seems to be debug code. Get rid of it. * as.c (struct itbl_file_list): Delete. (itbl_files): Delete. (parse_args): Don't keep itbl_files list. 2022-07-09 Alan Modra gas: free sy_hash, macro_hash and po_hash * macro.c (macro_end): New function. * macro.h (macro_end): Declare. * read.c (read_end, poend): New functions. * read.h (read_end): Declare. * symbols.c (symbol_end): New function. * symbols.h (symbol_end): Declare. * output-file.c (output_file_close): Call new *_end functions. 2022-07-09 Alan Modra dw2gencfi.c: use notes obstack Use notes obstack for dwcfi_hash entries, and free table. Freeing the table makes memory checkers complain more about "definitely lost" memory as we've moved some from the "still reachable" category. That will be fixed with a later patch. * dw2gencfi.c (get_debugseg_name): Allocate on notes obstack. (alloc_debugseg_item): Likewise. (dwcfi_hash_find_or_make): Adjust failure path free. (cfi_finish): Delete dwfci_hash. 2022-07-09 Alan Modra expr.c make_expr_symbol: use notes obstack * expr.c (make_expr_symbol): Use notes_alloc. read.c assign_symbol: use notes obstack for dummy listing frag * read.c (assign_symbol): Use notes_calloc for dummy_frag. read.c s_include: use notes obstack for path * read.c (s_include): Use notes obstack for path mem. 2022-07-09 Alan Modra macro.c: use string hash from hash.h for macro_hash Another case of duplicated hash.h code, the only minor difference being that macro->format_hash was created with 7 entries vs. str_hash with 16 entries. * macro.c (macro_init, define_macro): Use str_htab_create. (do_formals, define_macro, macro_expand_body): Use str_hash_insert (macro_expand_body): Use str_hash_find and str_hash_delete. (delete_macro): Likewise. (sub_actual, macro_expand, check_macro): Use str_hash_find. (expand_irp): Use str_htab_create and str_hash_insert. * macro.h (struct macro_struct): Tidy. (struct macro_hash_entry, macro_hash_entry_t, hash_macro_entry), (eq_macro_entry, macro_entry_alloc, macro_entry_find), (struct formal_hash_entry, formal_hash_entry_t), (hash_formal_entry, eq_formal_entry, formal_entry_alloc), (formal_entry_find): Delete. * config/tc-iq2000.c (iq2000_add_macro): Use str_htab_create and str_hash_insert. 2022-07-09 Alan Modra read.c: use string hash from hash.h for po_hash po_hash code duplicates the str_hash code in hash.h for no good reason. * read.c (struct po_entry, po_entry_t): Delete. (hash_po_entry, eq_po_entry, po_entry_alloc, po_entry_find): Delete. (pop_insert): Use str_hash_insert. (pobegin): Use str_htab_create. (read_a_source_file, s_macro): Use str_hash_find. 2022-07-09 Alan Modra free read_symbol_name string read_symbol_name mallocs the string it returns. Free it when done. * read.c (read_symbol_name): Free name on error path. * config/tc-ppc.c (ppc_GNU_visibility): Free name returned from read_symbol_name. (ppc_extern, ppc_globl, ppc_weak): Likewise. 2022-07-09 Alan Modra gas: output_file_close This is mostly a tidy with the aim of being able to free out_file_name, but it does fix a possible attempt to unlink the output file twice (not that that matters). * as.h (keep_it): New global. * as.c (keep_it): Delete. (close_output_file): Delete, merged into.. * output-file.c (output_file_close): ..here. Delete parameter. * output-file.h (output_file_close): Update prototype. 2022-07-09 Alan Modra gas: utility notes memory alloc functions Makes it a little easier to use the notes obstack for persistent storage. * as.h (gas_mul_overflow): Define. * symbols.h (notes_alloc, notes_calloc, notes_memdup), (notes_strdup, notes_concat, notes_free): Declare. * symbols.c (notes_alloc, notes_calloc, notes_memdup), (notes_strdup, notes_concat, notes_free): New functions. (save_symbol_name): Use notes_strdup. (symbol_create, local_symbol_make, local_symbol_convert), (symbol_clone, decode_local_label_name): Use notes_alloc. 2022-07-09 Alan Modra gas: arm -mwarn-syms duplicates arm gas is only supposed to warn once per symbol for -mwarn-syms, but doesn't because the str_hash_find added with commit 629310abec88 always returns NULL. That's so because the str_hash_insert inserts a NULL value for the key,value pair. Let str_hash_insert do the job instead. * config/tc-arm.c (arm_tc_equal_in_insn): Correct already_warned logic. * testsuite/gas/arm/pr18347.s: Modify to generate duplicate warning without this patch. 2022-07-09 Alan Modra Regenerate with automake-1.15.1 Until we update the recommended versions of autoconf/automake, files should be regenerated with automake-1.15.1 and autoconf-2.69. That's not because we think those versions are golden, and newer versions are bad. It's simply because maintainers want to be able to update configury files without trouble, and if someone regenerates files with automake-1.16.5 then --enable-maintainer-mode builds will hit errors: checking that generated files are newer than configure... configure.ac:26: error: version mismatch. This is Automake 1.15.1, configure.ac:26: but the definition used by this AM_INIT_AUTOMAKE configure.ac:26: comes from Automake 1.16.5. You should recreate configure.ac:26: aclocal.m4 with aclocal and run automake again. WARNING: 'automake-1.15' is probably too old. Correcting this requires regenerating the files by hand. 2022-07-09 GDB Administrator Automatic date update in version.in 2022-07-08 Tom Tromey Accept gdb.Value in more Python APIs PR python/27000 points out that gdb.block_for_pc will accept a Python integer, but not a gdb.Value. This patch corrects this oversight. I looked at all uses of GDB_PY_LLU_ARG and fixed these up to use get_addr_from_python instead. I also looked at uses of GDB_PY_LL_ARG, but those seemed relatively unlikely to be useful with a gdb.Value, so I didn't change them. My thinking here is that a Value will typically come from inferior memory, and something like a line number is not too likely to be found this way. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27000 2022-07-08 Tom Tromey Handle bool specially in gdb.set_parameter PR python/29217 points out that gdb.parameter will return bool values, but gdb.set_parameter will not properly accept them. This patch fixes the problem by adding a special case to set_parameter. I looked at a fix involving rewriting set_parameter in C++. However, this one is simpler. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29217 2022-07-08 Ludovic Courtès [gdb/build] Handle deprecation of scm_install_gmp_memory_functions When building gdb with guile 3.0.8, we run into: ... gdb/guile/guile.c: In function \ 'void gdbscm_initialize(const extension_language_defn*)': gdb/guile/guile.c:680:5: error: 'scm_install_gmp_memory_functions' is \ deprecated [-Werror=deprecated-declarations] 680 | scm_install_gmp_memory_functions = 0; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/guile/3.0/libguile.h:128, from gdb/guile/guile-internal.h:30, from gdb/guile/guile.c:36: /usr/include/guile/3.0/libguile/deprecated.h:164:20: note: declared here 164 | SCM_DEPRECATED int scm_install_gmp_memory_functions; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1plus: all warnings being treated as errors make[1]: *** [Makefile:1896: guile/guile.o] Error 1 ... The variable has been deprecated because it no longer has any effect. Fix this by disabling the specific deprecation warning. Also handle upcoming guile versions > 3.0, in which the variable will be removed, by limiting the usage of the variable to guile versions <= 3.0. This does not break anything. The variable was merely used to address a problem present in guile versions <= v3.0.5. Note that we don't limit the usage of the variable to guile versions <= 3.0.5, because we want to support f.i. building against 3.0.6 and then using a shared lib with 3.0.5. Tested on x86_64-linux. Co-Authored-By: Tom de Vries Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28994 2022-07-08 Tom de Vries [gdb/symtab] Fix assert in process_imported_unit_die When running test-case gdb.dwarf2/dw2-symtab-includes.exp with target board cc-with-debug-names, I run into: ... (gdb) maint expand-symtab dw2-symtab-includes.h^M src/gdb/dwarf2/read.h:311: internal-error: unit_type: \ Assertion `m_unit_type != 0' failed.^M A problem internal to GDB has been detected,^M further debugging may prove unreliable.^M ----- Backtrace -----^M FAIL: gdb.dwarf2/dw2-symtab-includes.exp: maint expand-symtab \ dw2-symtab-includes.h (GDB internal error) ... The assert was recently added in commit 2c474c46943 ("[gdb/symtab] Add get/set functions for per_cu->lang/unit_type"). The assert is triggered here: ... /* We're importing a C++ compilation unit with tag DW_TAG_compile_unit into another compilation unit, at root level. Regard this as a hint, and ignore it. */ if (die->parent && die->parent->parent == NULL && per_cu->unit_type () == DW_UT_compile && per_cu->lang () == language_cplus) return; ... We're trying to access unit_type / lang which hasn't been set yet. Normally, these are set during cooked index creation, but that's not the case when using an index (or using -readnow). In other words, this lto binary reading speed optimization only works in the normal use case. IWBN to have this working in all use cases, but for now, allow lang () and unit_type () to return language_unknown and 0 here. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29321 2022-07-08 Tom de Vries [gdb/symtab] Fix segfault in dwarf2_per_objfile::symtab_set_p When running test-case gdb.cp/cpexprs-debug-types.exp with target board cc-with-debug-names, I run into: ... (gdb) print base::operator new^M ^M ^M Fatal signal: Segmentation fault^M ----- Backtrace -----^M 0x57ea46 gdb_internal_backtrace_1^M /home/vries/gdb_versions/devel/src/gdb/bt-utils.c:122^M 0x57eae9 _Z22gdb_internal_backtracev^M /home/vries/gdb_versions/devel/src/gdb/bt-utils.c:168^M 0x75b8ad handle_fatal_signal^M /home/vries/gdb_versions/devel/src/gdb/event-top.c:946^M 0x75ba19 handle_sigsegv^M /home/vries/gdb_versions/devel/src/gdb/event-top.c:1019^M 0x7f795f46a8bf ???^M 0x6d3cb1 _ZNK18dwarf2_per_objfile12symtab_set_pEPK18dwarf2_per_cu_data^M /home/vries/gdb_versions/devel/src/gdb/dwarf2/read.c:1515^M ... The problem is in this piece of code in dw2_debug_names_iterator::next: ... case DW_IDX_type_unit: /* Don't crash on bad data. */ if (ull >= per_bfd->tu_stats.nr_tus) { complaint (_(".debug_names entry has bad TU index %s" " [in module %s]"), pulongest (ull), objfile_name (objfile)); continue; } per_cu = per_bfd->get_cu (ull + per_bfd->tu_stats.nr_tus); break; ... The all_comp_units vector (which get_cu accesses) contains both CUs and TUs, with CUs first. So to get the nth TU we need the element at "nr_cus + n", but the code uses "nr_tus + n" instead. Fix this by using "nr_cus + n". Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29334 2022-07-08 Enze Li gdb: initialize the data_head variable to eliminate compilation warnings On a machine with gcc 12, I get this warning: CXX nat/linux-btrace.o In function ‘btrace_error linux_read_bts(btrace_data_bts*, btrace_target_info*, btrace_read_type)’, inlined from ‘btrace_error linux_read_btrace(btrace_data*, btrace_target_info*, btrace_read_type)’ at ../gdb/nat/linux-btrace.c:935:29: ../gdb/nat/linux-btrace.c:865:21: warning: ‘data_head’ may be used uninitialized [-Wmaybe-uninitialized] 865 | pevent->last_head = data_head; | ~~~~~~~~~~~~~~~~~~^~~~~~~~~~~ ../gdb/nat/linux-btrace.c: In function ‘btrace_error linux_read_btrace(btrace_data*, btrace_target_info*, btrace_read_type)’: ../gdb/nat/linux-btrace.c:792:9: note: ‘data_head’ was declared here 792 | __u64 data_head, data_tail; | ^~~~~~~~~ Fix this by initializing the 'data_head' variable. Tested by rebuilding on x86_64 openSUSE Tumbleweed with gcc 12. 2022-07-08 Andrew Burgess libopcodes/s390: add support for disassembler styling This commit adds disassembler style to the libopcodes s390 disassembler. This conversion was pretty straight forward, I just converted the fprintf_func calls to fprintf_styled_func calls and added an appropriate style. For testing the new styling I just assembled then disassembled the source files in gas/testsuite/gas/s390 and manually checked that the styling looked reasonable. If the user does not request styled output from objdump, then there should be no change in the disassembler output after this commit. 2022-07-08 Nick Clifton Fix regeneration of ld configure and makefiles Update release README with new version numbers Update version to 2.39.50 and regenerate files Add markers for 2.39 branch 2022-07-08 GDB Administrator Automatic date update in version.in 2022-07-07 Vladimir Mezentsev gprofng: fix regression in testing for not yet installed version gprofng/ChangeLog 2022-07-07 Vladimir Mezentsev * src/Settings.cc (Settings::read_rc): Read environment variable GPROFNG_SYSCONFDIR. * testsuite/lib/Makefile.skel: Export GPROFNG_SYSCONFDIR. * testsuite/gprofng.display/display.exp: Shorten the list of tests. 2022-07-07 Simon Marchi gdb: fix {rs6000_nat_target,aix_thread_target}::wait to not use inferior_ptid Trying to run a simple program (empty main) on AIX, I get: (gdb) run Starting program: /scratch/simark/build/gdb/a.out Child process unexpectedly missing: There are no child processes.. ../../src/binutils-gdb/gdb/inferior.c:304: internal-error: find_inferior_pid: Assertion `pid != 0' failed. A problem internal to GDB has been detected, further debugging may prove unreliable. ----- Backtrace ----- 0x10ef12a8 gdb_internal_backtrace_1() ../../src/binutils-gdb/gdb/bt-utils.c:122 0x10ef1470 gdb_internal_backtrace() ../../src/binutils-gdb/gdb/bt-utils.c:168 0x1004d368 internal_vproblem(internal_problem*, char const*, int, char const*, char*) ../../src/binutils-gdb/gdb/utils.c:396 0x1004d8a8 internal_verror(char const*, int, char const*, char*) ../../src/binutils-gdb/gdb/utils.c:476 0x1004c424 internal_error(char const*, int, char const*, ...) ../../src/binutils-gdb/gdbsupport/errors.cc:55 0x102ab344 find_inferior_pid(process_stratum_target*, int) ../../src/binutils-gdb/gdb/inferior.c:304 0x102ab4a4 find_inferior_ptid(process_stratum_target*, ptid_t) ../../src/binutils-gdb/gdb/inferior.c:318 0x1061bae8 find_thread_ptid(process_stratum_target*, ptid_t) ../../src/binutils-gdb/gdb/thread.c:519 0x10319e98 handle_inferior_event(execution_control_state*) ../../src/binutils-gdb/gdb/infrun.c:5532 0x10315544 fetch_inferior_event() ../../src/binutils-gdb/gdb/infrun.c:4221 0x10952e34 inferior_event_handler(inferior_event_type) ../../src/binutils-gdb/gdb/inf-loop.c:41 0x1032640c infrun_async_inferior_event_handler(void*) ../../src/binutils-gdb/gdb/infrun.c:9548 0x10673188 check_async_event_handlers() ../../src/binutils-gdb/gdb/async-event.c:335 0x1066fce4 gdb_do_one_event() ../../src/binutils-gdb/gdbsupport/event-loop.cc:214 0x10001a94 start_event_loop() ../../src/binutils-gdb/gdb/main.c:411 0x10001ca0 captured_command_loop() ../../src/binutils-gdb/gdb/main.c:471 0x10003d74 captured_main(void*) ../../src/binutils-gdb/gdb/main.c:1329 0x10003e48 gdb_main(captured_main_args*) ../../src/binutils-gdb/gdb/main.c:1344 0x10000744 main ../../src/binutils-gdb/gdb/gdb.c:32 --------------------- ../../src/binutils-gdb/gdb/inferior.c:304: internal-error: find_inferior_pid: Assertion `pid != 0' failed. A problem internal to GDB has been detected, further debugging may prove unreliable. Quit this debugging session? (y or n) This is due to some bit-rot in the AIX port, still relying on the entry value of inferior_ptid in the wait methods. Problem #1 is in rs6000_nat_target::wait, here: /* Ignore terminated detached child processes. */ if (!WIFSTOPPED (status) && pid != inferior_ptid.pid ()) pid = -1; At this point, waitpid has returned an "exited" status for some pid, so pid is non-zero. Since inferior_ptid is set to null_ptid on entry, the pid returned by wait is not equal to `inferior_ptid.pid ()`, so we reset pid to -1 and go to waiting again. Since there are not more children to wait for, waitpid then returns -1 so we get here: if (pid == -1) { gdb_printf (gdb_stderr, _("Child process unexpectedly missing: %s.\n"), safe_strerror (save_errno)); /* Claim it exited with unknown signal. */ ourstatus->set_signalled (GDB_SIGNAL_UNKNOWN); return inferior_ptid; } We therefore return a "signalled" status with a null_ptid (again, inferior_ptid is null_ptid). This confuses infrun, because if the target returns a "signalled" status, it should be coupled with a ptid for an inferior that exists. So, the first step is to fix the snippets above to not use inferior_ptid. In the first snippet, use find_inferior_pid to see if we know the event process. If there is no inferior with that pid, we assume it's a detached child process to we ignore the event. That should be enough to fix the problem, because it should make it so we won't go into the second snippet. But still, fix the second snippet to return an "ignore" status. This is copied from inf_ptrace_target::wait, which is where rs6000_nat_target::wait appears to be copied from in the first place. These changes, are not sufficient, as the aix_thread_target, which sits on top of rs6000_nat_target, also relies on inferior_ptid. aix_thread_target::wait, by calling pd_update, assumes that rs6000_nat_target has set inferior_ptid to the appropriate value (the ptid of the event thread), but that's not the case. pd_update returns inferior_ptid - null_ptid - and therefore aix_thread_target::wait returns null_ptid too, and we still hit the assert shown above. Fix this by changing pd_activate, pd_update, sync_threadlists and get_signaled_thread to all avoid using inferior_ptid. Instead, they accept as a parameter the pid of the process we are working on. With this patch, I am able to run the program to completion: (gdb) r Starting program: /scratch/simark/build/gdb/a.out [Inferior 1 (process 11010794) exited normally] As well as break on main: (gdb) b main Breakpoint 1 at 0x1000036c (gdb) r Starting program: /scratch/simark/build/gdb/a.out Breakpoint 1, 0x1000036c in main () (gdb) c Continuing. [Inferior 1 (process 26083688) exited normally] Change-Id: I7c2613bbefe487d75fa1a0c0994423471d961ee9 2022-07-07 Pedro Alves Fix pedantically invalid DWARF in gdb.trace/unavailable-dwarf-piece.exp The DWARF spec says: Any debugging information entry representing the declaration of an object, module, subprogram or type may have DW_AT_decl_file, DW_AT_decl_line and DW_AT_decl_column attributes, each of whose value is an unsigned integer ^^^^^^^^ constant. Grepping around the DWARF-assembler-based testcases, I noticed that gdb.trace/unavailable-dwarf-piece.exp emits decl_line with DW_FORM_sdata, a signed integer form. This commit tweaks it to use DW_FORM_udata instead. Unsurprisingly, this: $ make check \ TESTS="gdb.trace/unavailable-dwarf-piece.exp" \ RUNTESTFLAGS="--target_board=native-gdbserver" ... still passes cleanly for me after this change. I've noticed this because current llvm-dwarfdump crashed on an ROCm-internal DWARF-assembler-based testcase that incorrectly used signed forms for DW_AT_decl_file/DW_AT_decl_line. The older llvm-dwarfdump found on Ubuntu 20.04 (LLVM 10) reads the line numbers with signed forms as "0" instead of crashing. Here's the before/after fix for gdb.trace/unavailable-dwarf-piece.exp with that llvm-dwarfdump version: $ diff -up before.txt after.txt --- before.txt 2022-07-07 13:21:28.387690334 +0100 +++ after.txt 2022-07-07 13:21:39.379801092 +0100 @@ -18,7 +18,7 @@ DW_AT_name ("s") DW_AT_byte_size (3) DW_AT_decl_file (0) - DW_AT_decl_line (0) + DW_AT_decl_line (1) 0x0000002f: DW_TAG_member DW_AT_name ("a") @@ -41,7 +41,7 @@ DW_AT_name ("t") DW_AT_byte_size (3) DW_AT_decl_file (0) - DW_AT_decl_line (0) + DW_AT_decl_line (1) 0x00000054: DW_TAG_member DW_AT_name ("a") Change-Id: I5c866946356da421ff944019d0eca2607b2b738f 2022-07-07 Tiezhu Yang gdb: LoongArch: Fix typos in code comments "it’s" should be "it's". 2022-07-07 Maciej W. Rozycki GDB/testsuite: Add coverage for `print -elements' command We currently have no coverage for the `print -elements ...' command (or `p -elements ...' in the shortened form), so add a couple of test cases mimicking ones using corresponding `set print elements ...' values. 2022-07-07 Tiezhu Yang gdb: LoongArch: Implement the push_dummy_call gdbarch method According to "Procedure Calling Convention" in "LoongArch ELF ABI specification" [1], implement the push_dummy_call gdbarch method as clear as possible. [1] https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html#_procedure_calling_convention 2022-07-07 Tsukasa OI RISC-V: Added Zfhmin and Zhinxmin. This commit adds Zfhmin and Zhinxmin extensions (subsets of Zfh and Zhinx extensions, respectively). In the process supporting Zfhmin and Zhinxmin extension, this commit also changes how instructions are categorized considering Zfhmin, Zhinx and Zhinxmin extensions. Detailed changes, * From INSN_CLASS_ZFH to INSN_CLASS_ZFHMIN: flh, fsh, fmv.x.h and fmv.h.x. * From INSN_CLASS_ZFH to INSN_CLASS_ZFH_OR_ZHINX: fmv.h. * From INSN_CLASS_ZFH_OR_ZHINX to INSN_CLASS_ZFH_OR_ZHINX: fneg.h, fabs.h, fsgnj.h, fsgnjn.h, fsgnjx.h, fadd.h, fsub.h, fmul.h, fdiv.h, fsqrt.h, fmin.h, fmax.h, fmadd.h, fnmadd.h, fmsub.h, fnmsub.h, fcvt.w.h, fcvt.wu.h, fcvt.h.w, fcvt.h.wu, fcvt.l.h, fcvt.lu.h, fcvt.h.l, fcvt.h.lu, feq.h, flt.h, fle.h, fgt.h, fge.h, fclass.h. * From INSN_CLASS_ZFH_OR_ZHINX to INSN_CLASS_ZFHMIN_OR_ZHINXMIN: fcvt.s.h and fcvt.h.s. * From INSN_CLASS_D_AND_ZFH_INX to INSN_CLASS_ZFHMIN_AND_D: fcvt.d.h and fcvt.h.d. * From INSN_CLASS_Q_AND_ZFH_INX to INSN_CLASS_ZFHMIN_AND_Q: fcvt.q.h and fcvt.h.q. bfd/ChangeLog: * elfxx-riscv.c (riscv_implicit_subsets): Change implicit subsets. Zfh->Zicsr is not needed and Zfh->F is replaced with Zfh->Zfhmin and Zfhmin->F. Zhinx->Zicsr is not needed and Zhinx->Zfinx is replaced with Zhinx->Zhinxmin and Zhinxmin->Zfinx. (riscv_supported_std_z_ext): Added zfhmin and zhinxmin. (riscv_multi_subset_supports): Rewrite handling for new instruction classes. (riscv_multi_subset_supports_ext): Updated. (riscv_parse_check_conflicts): Change error message to include zfh and zfhmin extensions. gas/ChangeLog: * testsuite/gas/riscv/zfhmin-d-insn-class-fail.s: New complex error handling test. * testsuite/gas/riscv/zfhmin-d-insn-class-fail-1.d: Likewise. * testsuite/gas/riscv/zfhmin-d-insn-class-fail-1.l: Likewise. * testsuite/gas/riscv/zfhmin-d-insn-class-fail-2.d: Likewise. * testsuite/gas/riscv/zfhmin-d-insn-class-fail-2.l: Likewise. * testsuite/gas/riscv/zfhmin-d-insn-class-fail-3.d: Likewise. * testsuite/gas/riscv/zfhmin-d-insn-class-fail-3.l: Likewise. * testsuite/gas/riscv/zfhmin-d-insn-class-fail-4.d: Likewise. * testsuite/gas/riscv/zfhmin-d-insn-class-fail-4.l: Likewise. * testsuite/gas/riscv/zfhmin-d-insn-class-fail-5.d: Likewise. * testsuite/gas/riscv/zfhmin-d-insn-class-fail-5.l: Likewise. * testsuite/gas/riscv/zhinx.d: Renamed from fp-zhinx-insns.d and refactored. * testsuite/gas/riscv/zhinx.s: Likewise. include/ChangeLog: * opcode/riscv.h (enum riscv_insn_class): Removed INSN_CLASS_ZFH, INSN_CLASS_D_AND_ZFH_INX and INSN_CLASS_Q_AND_ZFH_INX. Added INSN_CLASS_ZFHMIN, INSN_CLASS_ZFHMIN_OR_ZHINXMIN, INSN_CLASS_ZFHMIN_AND_D and INSN_CLASS_ZFHMIN_AND_Q. opcodes/ChangeLog: * riscv-opc.c (riscv_opcodes): Change instruction classes for Zfh and Zfhmin instructions. Fix `fcvt.h.lu' instruction (two operand variant) mask. 2022-07-07 Vladimir Mezentsev gprofng: adjust GPROFNG_VARIANT GPROFNG_VARIANT depends on compiler options, not on $(host). gprofng/ChangeLog 2022-07-06 Vladimir Mezentsev PR gprofng/29116 * libcollector/configure.ac: Adjust GPROFNG_VARIANT. * libcollector/configure: Rebuild. 2022-07-07 Tsukasa OI RISC-V: Fix disassembling Zfinx with -M numeric This commit fixes floating point operand register names from ABI ones to dynamically set ones. gas/ChangeLog: * testsuite/gas/riscv/zfinx-dis-numeric.s: Test new behavior of Zfinx extension and -M numeric disassembler option. * testsuite/gas/riscv/zfinx-dis-numeric.d: Likewise. opcodes/ChangeLog: * riscv-dis.c (riscv_disassemble_insn): Use dynamically set GPR names to disassemble Zfinx instructions. 2022-07-07 Tsukasa OI RISC-V: Fix requirement handling on Zhinx+{D,Q} This commit fixes how instructions are masked on Zhinx+Z{d,q}inx. fcvt.h.d and fcvt.d.h require ((D&&Zfh)||(Zdinx&&Zhinx)) and fcvt.h.q and fcvt.q.h require ((Q&&Zfh)||(Zqinx&&Zhinx)). bfd/ChangeLog: * elfxx-riscv.c (riscv_multi_subset_supports): Fix feature gate on INSN_CLASS_{D,Q}_AND_ZFH_INX. (riscv_multi_subset_supports_ext): Fix feature gate diagnostics on INSN_CLASS_{D,Q}_AND_ZFH_INX. gas/ChangeLog: * testsuite/gas/riscv/fp-zhinx-insns.d: Add Zqinx to -march for proper testing. 2022-07-07 Alan Modra PR29320, 'struct obstack' declared inside parameter list PR 29320 * frags.h: Move declaration of struct obstack.. * as.h: ..to here. 2022-07-07 GDB Administrator Automatic date update in version.in 2022-07-06 Ruud van der Pas gprofng: implement a functional gp-display-html This patch enables the first support for the "gprofng display html" command. This command works for C/C++ applications on x86_64. Using one or more gprofng experiment directories as input, a new directory with html files is created. Through the index.html file in this directory, the performance results may be viewed in a browser. gprofng/Changelog: 2022-06-28 Ruud van der Pas * gp-display-html/gp-display-html.in: implement first support for x86_64 and C/C++ 2022-07-06 H.J. Lu elf: Copy p_align of PT_GNU_STACK for stack alignment commit 74e315dbfe5200c473b226e937935fb8ce391489 Author: H.J. Lu Date: Mon Dec 13 19:46:04 2021 -0800 elf: Set p_align to the minimum page size if possible may ignore p_align of PT_GNU_STACK when copying ELF program header if the maximum page size is larger than p_align of PT_LOAD segments. Copy p_align of PT_GNU_STACK since p_align of PT_GNU_STACK describes stack alignment, not page size, PR binutils/29319 * elf.c (copy_elf_program_header): Copy p_align of PT_GNU_STACK for stack alignment. 2022-07-06 Jan Beulich x86: make D attribute usable for XOP and FMA4 insns This once again allows to reduce redundancy in (and size of) the opcode table. Don't go as far as also making D work on the two 5-operand XOP insns: This would significantly complicate the code, as there the first (immediate) operand would need special treatment in several places. Note that the .s suffix isn't being enabled to have any effect, for being deprecated. Whereas neither {load} nor {store} pseudo prefixes make sense here, as the respective operands are inputs (loads) only anyway, regardless of order. Hence there is (as before) no way for the programmer to request the alternative encoding to be used for register- only insns. Note further that it is always the first original template which is retained (and altered), to make sure the same encoding as before is used for register-only insns. This has the slightly odd (but pre- existing) effect of XOP register-only insns having XOP.W clear, but FMA4 ones having VEX.W set. 2022-07-06 Jan Beulich x86: fold two switch() statements in match_template() I don't see why two of them were introduced (very long ago) using similar fall-through logic. 2022-07-06 Jan Beulich x86: fix 3-operand insn reverse-matching The middle operand would have gone entirely unchecked, allowing e.g. vmovss %xmm0, %esp, %xmm2 to assemble successfully, or e.g. vmovss %xmm0, $4, %xmm2 causing an internal error. Alongside dealing with this also drop a related comment, which hasn't been applicable anymore since the introduction of 3-operand patterns with D set (and which perhaps never had been logical to be there, as reverse-matched insns don't make it there in the first place). 2022-07-06 Bhuvanendra Kumar N Descriptive DWARF operations dump support for DW_AT_rank DW_AT_rank is a dwarf-5 feature. 2022-07-06 Jan Beulich x86: introduce a state stack for .arch When using just slightly non-trivial combinations of .arch, it can be quite useful to be able to go back to prior state without needing to re-invoke perhaps many earlier directives and without needing to invoke perhaps many "negative" ones. Like some other architectures allow saving (pushing) and restoring (popping) present/prior state. For now require the same .code to be in effect for ".arch pop" that was in effect for the corresponding ".arch push". Also change the global "no_cond_jump_promotion" to be bool, to match the new struct field. 2022-07-06 Jan Beulich x86: generalize disabling of sub-architectures I never really understood upon what basis ".arch .no*" options were made available. Let's not have any "criteria" at all, and simply allow disabling of all of them. Then we also have all data for a sub-arch in a single place, as we now only need a single table. 2022-07-06 Jan Beulich x86: permit "default" with .arch So far there was no way to reset the architecture to that assembly would start with in the absence of any overrides (command line or directives). Note that for Intel MCU "default" is merely an alias of "iamcu". While there also zap a stray @item from the doc section, as noticed when inspecting the generated output (which still has some quirks, but those aren't easy to address without re-flowing almost the entire section). 2022-07-06 Jan Beulich x86: don't leak sub-architecture accumulated strings While it may not be necessary in i386_target_format() (but then setting the variable to NULL also wouldn't be necessary), at least in the other cases strings may already have accumulated. 2022-07-06 GDB Administrator Automatic date update in version.in 2022-07-05 Tom de Vries [gdb/exp] Fix internal error when printing C++ pointer-to-member When running the test-case included with this patch, we run into: ... (gdb) print ptm^M $1 = gdb/gdbtypes.h:695: internal-error: loc_bitpos: \ Assertion `m_loc_kind == FIELD_LOC_KIND_BITPOS' failed.^M ... while printing a c++ pointer-to-member. Fix this by skipping static fields in cp_find_class_member, such that we have: ... (gdb) print ptm^M $1 = &A::i^M ... Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29294 2022-07-05 Tom Tromey Add gdb.Objfile.is_file attribute Sometimes an objfile comes from memory and not from a file. It can be useful to be able to check this from Python, so this patch adds a new "is_file" attribute. 2022-07-05 Tom Tromey Make 'import gdb.events' work Pierre-Marie noticed that, while gdb.events is a Python module, it can't be imported. This patch changes how this module is created, so that it can be imported, while also ensuring that the module is always visible, just as it was in the past. This new approach required one non-obvious change -- when running gdb.base/warning.exp, where --data-directory is intentionally not found, the event registries can now be nullptr. Consequently, this patch probably also requires https://sourceware.org/pipermail/gdb-patches/2022-June/189796.html Note that this patch obsoletes https://sourceware.org/pipermail/gdb-patches/2022-June/189797.html 2022-07-05 Xi Ruoyao gdb: LoongArch: add orig_a0 into register set The basic support for LoongArch has been merged into the upstream Linux kernel since 5.19-rc1 on June 5, 2022. This commit adds orig_a0 which is added into struct user_pt_regs [1] to match the upstream kernel, and then the upstream GDB will work with the upstream kernel. Note that orig_a0 was added into struct user_pt_regs in the development cycle for merging LoongArch port into the upstream Linux kernel, so earlier kernels (notably, the product kernel with version 4.19 used in distros like UOS and Loongnix) don't have it. Inspect arch/loongarch/include/uapi/asm/ptrace.h in the kernel tree to make sure. To build upstream GDB for a kernel lacking orig_a0, it's necessary to revert this commit locally. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/loongarch/include/uapi/asm/ptrace.h#n24 2022-07-05 Bhuvanendra Kumar N Support for location and range lists for split-dwarf and dwarf-5. Adding support for location and range lists for split-dwarf and dwarf-5. Following issues are taken care. 1. Display of the index values for DW_FORM_loclistx and DW_FORM_rnglistx. 2. Display of .debug_loclists.dwo and .debug_rnglists.dwo sections. * dwarf.c(read_and_display_attr_value): Handle DW_FORM_loclistx and DW_FORM_rnglistx for .dwo files. (process_debug_info): Load .debug_loclists.dwo and .debug_rnglists.dwo if exists. (load_separate_debug_files): Load .debug_loclists and .debug_rnglists if exists. Include 2 entries in debug_displays table. * dwarf.h (enum dwarf_section_display_enum): Include 2 entries. 2022-07-05 Jan Beulich x86: introduce fake processor type to mark sub-arch entries in cpu_arch[] This is in preparation of dropping the leading . from the strings. While there also move PROCESSOR_GENERIC{32,64} from the middle of AMD entries to near the top. 2022-07-05 Jan Beulich x86: macro-ize cpu_arch[] entries Putting individual elements behind macros, besides (imo) improving readability, will make subsequent (and likely also future) changes less intrusive. Utilize this right away to pack the table a little more tightly, by converting "skip" to bool and putting it earlier in a group of bitfields together with "len". 2022-07-05 Jan Beulich x86: de-duplicate sub-architecture strings accumulation Introduce a helper function to replace 4 instances of similar code. Use reconcat() to cover the previously explicit free(). 2022-07-05 GDB Administrator Automatic date update in version.in 2022-07-04 Nick Clifton Fix snafu in rust demangler recursion limit code 2022-07-04 Alan Modra alloc gas seginfo on notes obstack Lots of memory used in gas should go on this obstack. The patch also frees all the gas obstacks on exit, which isn't a completely trivial task. * subsegs.c (alloc_seginfo): New function. (subseg_change, subseg_get): Use it. (subsegs_end): New function. * as.h (subsegs_end): Declare. * output-file.c: Include subsegs.h (stash_frchain_obs): New function. (output_file_close): Save obstacks attached to output bfd before closing. Call subsegs_end with the array of obstacks. 2022-07-04 Alan Modra objcopy: bfd_alloc orelocation This fixes an inconsequential objcopy memory leak. I'd normally ignore reports of leaks like this one, that are merely one block or fewer per section processed, since objcopy soon exits and frees all memory. However I thought it worth providing support for allocating memory on a bfd objalloc in objcopy and other utils. PR 29233 * bucomm.c (bfd_xalloc): New function. * bucomm.h (bfd_xalloc): Declare. * objcopy.c (copy_relocations_in_section): Use it to allocate array of reloc pointers. Rewrite code stripping relocs to do without extra memory allocation. 2022-07-04 Nick Clifton Synchronize libbierty sources with gcc. 2022-07-04 Bhuvanendra Kumar N Modified changes for split-dwarf and dwarf-5. * dwarf.c(process_debug_info): Include DW_TAG_skeleton_unit. (display_debug_str_offsets): While dumping .debug_str_offsets.dwo, pass proper str_offsets_base to fetch_indexed_string(). (load_separate_debug_files): Skip DWO ID dump for dwarf-5. 2022-07-04 Marcus Nilsson opcodes/avr: Implement style support in the disassembler * disassemble.c: (disassemble_init_for_target): Set created_styled_output for AVR based targets. * avr-dis.c: (print_insn_avr): Use fprintf_styled_ftype instead of fprintf_ftype throughout. (avr_operand): Pass in and fill disassembler_style when parsing operands. 2022-07-04 Tom de Vries [gdb/symtab] Add get/set functions for per_cu->lang/unit_type The dwarf2_per_cu_data fields lang and unit_type both have a dont-know initial value (respectively language_unknown and (dwarf_unit_type)0), which allows us to add certain checks, f.i. checking that that a field is not read before written. Add get/set member functions for the two fields as a convenient location to add such checks, make the fields private to enforce using the member functions, and add the m_ prefix. Tested on x86_64-linux. 2022-07-04 Jan Beulich gas/testsuite: properly exclude aout in all/weakref1u Use the (wider) predicate rather than a triplet. This eliminates the sole i386-msdos failure in the testsuite. 2022-07-04 Jan Beulich x86: fold Disp32S and Disp32 The only case where 64-bit code uses non-sign-extended (can also be considered zero-extended) displacements is when an address size override is in place for a memory operand (i.e. particularly excluding displacements of direct branches, which - if at all - are controlled by operand size, and then are still sign-extended, just from 16 bits). Hence the distinction in templates is unnecessary, allowing code to be simplified in a number of places. The only place where logic becomes more complicated is when signed-ness of relocations is determined in output_disp(). The other caveat is that Disp64 cannot be specified anymore in an insn template at the same time as Disp32. Unlike for non-64-bit mode, templates don't specify displacements for both possible addressing modes; the necessary adjustment to the expected ones has already been done in match_template() anyway (but of course the logic there needs tweaking now). Hence the single template so far doing so is split. 2022-07-04 Jan Beulich x86: restore masking of displacement kinds Commit 7d5e4556a375 rendered the check near the end of what is now i386_finalize_displacement() entirely dead for AT&T mode, since for operands involving a displacement .unspecified will always be set. But the logic there is bogus anyway - Intel syntax operand size specifiers are of no interest there either. The only thing which matters in the "displacement only" determination is .baseindex. Of course when masking displacement kinds we should not at the same time also mask off other attributes. Furthermore the type mask returned by lex_got() also needs to be adjusted: The only case where we want Disp32 (rather than Disp32S) is when dealing with 32-bit addressing mode in 64-bit code. 2022-07-04 Jan Beulich x86-64: improve handling of branches to absolute addresses There are two related problems here: The use of "addr32" on a direct branch would, besides causing a warning, result in operands to be permitted which mistakenly are refused without "addr32". Plus at some point not too long ago I'm afraid it may have been me who regressed the relocation addends emitted for such branches. Correct both problems, adding a testcase to guard against regressing this again. 2022-07-04 Tsukasa OI RISC-V: Update Zihintpause extension version Because ratified Zihintpause extension has a version number of 2.0 (not 1.0), we should update the number. bfd/ChangeLog: * elfxx-riscv.c (riscv_supported_std_z_ext): Update version number of Zihintpause extension. 2022-07-04 GDB Administrator Automatic date update in version.in 2022-07-03 GDB Administrator Automatic date update in version.in 2022-07-02 Tom de Vries [gdb/symtab] Fix data race on per_cu->dwarf_version When building gdb with -fsanitize=thread and gcc 12, and running test-case gdb.dwarf2/dwz.exp, we run into a data race between thread T2 and the main thread in the same write: ... Write of size 1 at 0x7b200000300c:^M #0 cutu_reader::cutu_reader(dwarf2_per_cu_data*, dwarf2_per_objfile*, \ abbrev_table*, dwarf2_cu*, bool, abbrev_cache*) gdb/dwarf2/read.c:6252 \ (gdb+0x82f3b3)^M ... which is here: ... this_cu->dwarf_version = cu->header.version; ... Both writes are called from the parallel for in dwarf2_build_psymtabs_hard, this one directly: ... #1 process_psymtab_comp_unit gdb/dwarf2/read.c:6774 (gdb+0x8304d7)^M #2 operator() gdb/dwarf2/read.c:7098 (gdb+0x8317be)^M #3 operator() gdbsupport/parallel-for.h:163 (gdb+0x872380)^M ... and this via the PU import: ... #1 cooked_indexer::ensure_cu_exists(cutu_reader*, dwarf2_per_objfile*, \ sect_offset, bool, bool) gdb/dwarf2/read.c:17964 (gdb+0x85c43b)^M #2 cooked_indexer::index_imported_unit(cutu_reader*, unsigned char const*, \ abbrev_info const*) gdb/dwarf2/read.c:18248 (gdb+0x85d8ff)^M #3 cooked_indexer::index_dies(cutu_reader*, unsigned char const*, \ cooked_index_entry const*, bool) gdb/dwarf2/read.c:18302 (gdb+0x85dcdb)^M #4 cooked_indexer::make_index(cutu_reader*) gdb/dwarf2/read.c:18443 \ (gdb+0x85e68a)^M #5 process_psymtab_comp_unit gdb/dwarf2/read.c:6812 (gdb+0x830879)^M #6 operator() gdb/dwarf2/read.c:7098 (gdb+0x8317be)^M #7 operator() gdbsupport/parallel-for.h:171 (gdb+0x8723e2)^M ... Fix this by setting the field earlier, in read_comp_units_from_section. The write in cutu_reader::cutu_reader() is still needed, in case read_comp_units_from_section is not used (run the test-case with say, target board cc-with-gdb-index). Make the write conditional, such that it doesn't trigger if the field is already set by read_comp_units_from_section. Instead, verify that the field already has the value that we're trying to set it to. Move this logic into into a member function set_version (in analogy to the already present member function version) to make sure it's used consistenly, and make the field private in order to enforce access through the member functions, and rename it to m_dwarf_version. While we're at it, make sure that the version is set before read, to avoid say returning true for "per_cu.version () < 5" if "per_cu.version () == 0". Tested on x86_64-linux. 2022-07-02 Tom de Vries [gdb/testsuite] Fix gdb.base/early-init-file.exp with -fsanitize=thread When building gdb with -fsanitize=thread, I run into: ... FAIL: gdb.base/early-init-file.exp: check startup version string has style \ version ... due to this: ... warning: Found custom handler for signal 7 (Bus error) preinstalled.^M warning: Found custom handler for signal 8 (Floating point exception) \ preinstalled.^M warning: Found custom handler for signal 11 (Segmentation fault) \ preinstalled.^M Some signal dispositions inherited from the environment (SIG_DFL/SIG_IGN)^M won't be propagated to spawned programs.^M ... appearing before the "GNU gdb (GDB) $version" line. This is similar to the problem fixed by commit f0bbba7886f ("gdb.debuginfod/fetch_src_and_symbols.exp: fix when GDB is built with AddressSanitizer"). In that commit, the problem was fixed by starting gdb with -quiet, but using that would mean the "GNU gdb (GDB) $version" line that we're trying to check would disappear. Fix this instead by updating the regexp to allow the message. Tested on x86_64-linux. 2022-07-02 GDB Administrator Automatic date update in version.in 2022-07-01 Maciej W. Rozycki GDB/doc: Remove indentation from `print -elements' completion example Remove indentation from the text of the manual after the example here: " Completion will in some cases guide you with a suggestion of what kind of argument an option expects. For example: (gdb) print -elements NUMBER unlimited Here, the option expects a number (e.g., '100'), not literal 'NUMBER'. Such metasyntactical arguments are always presented in uppercase." as this is a continuation of the same paragraph. 2022-07-01 Maciej W. Rozycki GDB/doc: Remove extraneous spaces from completion examples Completion results are usually different when the operation is applied to a word that is or is not followed by a space. In some cases they are equivalent, however a space would not be produced if completion was used earlier on in the word processed. However in the manual we have completion examples given using a space that actually prevents the example from working. E.g.: (gdb) info bre (nothing) and: (gdb) info bre Display all 200 possibilities? (y or n) as it now goes on to propose the entire symbol table, while: (gdb) info bre (gdb) info breakpoints does the right thing, but is not what is shown in the manual. In other cases an extraneous space is used that does not correspond to the actual completion pattern shown, which gives an impression of sloppiness. Remove extraneous spaces then from completion examples as appropriate. 2022-07-01 Nick Clifton Add newline to the end of the rnglists displsy. 2022-07-01 GDB Administrator Automatic date update in version.in 2022-06-30 Maciej W. Rozycki GDB: Add `NUMBER' completion to `set' integer commands Fix a completion consistency issue with `set' commands accepting integer values and the special `unlimited' keyword: (gdb) complete print -elements print -elements NUMBER print -elements unlimited (gdb) vs: (gdb) complete set print elements set print elements unlimited (gdb) (there is a space entered at the end of both commands, not shown here) which also means if you strike with `set print elements ' input, it will, annoyingly, complete to `set print elements unlimited' right away rather than showing a choice between `NUMBER' and `unlimited'. Add `NUMBER' then as an available completion for such `set' commands: (gdb) complete set print elements set print elements NUMBER set print elements unlimited (gdb) Adjust the testsuite accordingly. Also document the feature in the Completion section of the manual in addition to the Command Options section already there. 2022-06-30 Bruno Larsen gdb/testsuite: Expand gdb.cp/mb-ctor.exp to test dynamic allocation When testing GDB's ability to stop in constructors, gdb.cp/mb-ctor.exp only tested objects allocated on the stack. This commit adds a couple of dynamic allocations and tests if GDB can stop in it as well. 2022-06-30 Nick Clifton Fix implementation of readelf's -wE and -wN options, * dwarf.c (dwarf_select_sections_by_name): If the entry's value is zero then clear the corresponding variable. (dwarf_select_sections_by_letters): Likewise. * testsuite/binutils-all/debuginfo.exp: Expect -WE and -wE debuginfod tests to fail. 2022-06-30 Tom de Vries [gdb] Block SIGTERM in worker threads With gdb build with gcc-12 and -fsanitize=thread, and test-case gdb.base/gdb-sigterm.exp, I run into: ... WARNING: ThreadSanitizer: data race (pid=9722)^M Write of size 4 at 0x00000325bc68 by thread T1:^M #0 handle_sigterm(int) src/gdb/event-top.c:1211 (gdb+0x8ec01f)^M ... Previous read of size 4 at 0x00000325bc68 by main thread:^M [failed to restore the stack]^M ^M Location is global 'sync_quit_force_run' of size 4 at \ 0x00000325bc68 (gdb+0x325bc68)^M ... SUMMARY: ThreadSanitizer: data race gdb/event-top.c:1211 in \ handle_sigterm(int)^M ... and 3 more data races involving handle_sigterm and locations: - active_ext_lang - quit_flag - heap block of size 40 (XNEW (async_signal_handler) in create_async_signal_handler) This was reported in PR29297. The testcase executes a "kill -TERM $gdb_pid", which generates a process-directed signal. A process-directed signal can be delivered to any thread, and what we see here is the fallout of the signal being delivered to a worker thread rather than the main thread. Fix this by blocking SIGTERM in the worker threads. [ I have not been able to reproduce this after it occurred for the first time, so unfortunately I cannot confirm that the patch fixes the problem. ] Tested on x86_64-linux, with and without -fsanitize=thread. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29297 2022-06-30 Andrew Burgess gdb/doc: fix column widths in MI compatibility table In passing I noticed that the column headings for the table of MI compatibility and breaking changes, were overlapping, at least when the PDF is generated on my machine. I propose giving slightly more space to the two version number columns, this prevents the headers overlapping for me. 2022-06-30 GDB Administrator Automatic date update in version.in 2022-06-29 Pedro Alves Fix GDBserver regression due to change to avoid reading shell registers Simon reported that the recent change to make GDB and GDBserver avoid reading shell registers caused a GDBserver regression, caught with ASan while running gdb.server/non-existing-program.exp: $ /home/smarchi/build/binutils-gdb/gdb/testsuite/../../gdb/../gdbserver/gdbserver stdio non-existing-program ================================================================= ==127719==ERROR: AddressSanitizer: heap-use-after-free on address 0x60f0000000e9 at pc 0x55bcbfa301f4 bp 0x7ffd238a7320 sp 0x7ffd238a7310 WRITE of size 1 at 0x60f0000000e9 thread T0 #0 0x55bcbfa301f3 in scoped_restore_tmpl::~scoped_restore_tmpl() /home/smarchi/src/binutils-gdb/gdbserver/../gdbsupport/scoped_restore.h:86 #1 0x55bcbfa2ffe9 in post_fork_inferior(int, char const*) /home/smarchi/src/binutils-gdb/gdbserver/fork-child.cc:120 #2 0x55bcbf9c9199 in linux_process_target::create_inferior(char const*, std::__debug::vector > const&) /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:991 #3 0x55bcbf954549 in captured_main /home/smarchi/src/binutils-gdb/gdbserver/server.cc:3941 #4 0x55bcbf9552f0 in main /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4084 #5 0x7ff9d663b0b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x240b2) #6 0x55bcbf8ef2bd in _start (/home/smarchi/build/binutils-gdb/gdbserver/gdbserver+0x1352bd) 0x60f0000000e9 is located 169 bytes inside of 176-byte region [0x60f000000040,0x60f0000000f0) freed by thread T0 here: #0 0x7ff9d6c6f0c7 in operator delete(void*) ../../../../src/libsanitizer/asan/asan_new_delete.cpp:160 #1 0x55bcbf910d00 in remove_process(process_info*) /home/smarchi/src/binutils-gdb/gdbserver/inferiors.cc:164 #2 0x55bcbf9c4ac7 in linux_process_target::remove_linux_process(process_info*) /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:454 #3 0x55bcbf9cdaa6 in linux_process_target::mourn(process_info*) /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:1599 #4 0x55bcbf988dc4 in target_mourn_inferior(ptid_t) /home/smarchi/src/binutils-gdb/gdbserver/target.cc:205 #5 0x55bcbfa32020 in startup_inferior(process_stratum_target*, int, int, target_waitstatus*, ptid_t*) /home/smarchi/src/binutils-gdb/gdbserver/../gdb/nat/fork-inferior.c:515 #6 0x55bcbfa2fdeb in post_fork_inferior(int, char const*) /home/smarchi/src/binutils-gdb/gdbserver/fork-child.cc:111 #7 0x55bcbf9c9199 in linux_process_target::create_inferior(char const*, std::__debug::vector > const&) /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:991 #8 0x55bcbf954549 in captured_main /home/smarchi/src/binutils-gdb/gdbserver/server.cc:3941 #9 0x55bcbf9552f0 in main /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4084 #10 0x7ff9d663b0b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x240b2) previously allocated by thread T0 here: #0 0x7ff9d6c6e5a7 in operator new(unsigned long) ../../../../src/libsanitizer/asan/asan_new_delete.cpp:99 #1 0x55bcbf910ad0 in add_process(int, int) /home/smarchi/src/binutils-gdb/gdbserver/inferiors.cc:144 #2 0x55bcbf9c477d in linux_process_target::add_linux_process_no_mem_file(int, int) /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:425 #3 0x55bcbf9c8f4c in linux_process_target::create_inferior(char const*, std::__debug::vector > const&) /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:985 #4 0x55bcbf954549 in captured_main /home/smarchi/src/binutils-gdb/gdbserver/server.cc:3941 #5 0x55bcbf9552f0 in main /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4084 #6 0x7ff9d663b0b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x240b2) Above we see that in the non-existing-program case, the process gets deleted before the starting_up flag gets restored to false. This happens because startup_inferior calls target_mourn_inferior before throwing an error, and in GDBserver, unlike in GDB, mourning deletes the process. Fix this by not using a scoped_restore to manage the starting_up flag, since we should only clear it when startup_inferior doesn't throw. Change-Id: I67325d6f81c64de4e89e20e4ec4556f57eac7f6c 2022-06-29 Maciej W. Rozycki GDB/testsuite: Tighten `set print elements' error check Match the whole error message expected to be given rather than omitting the part about the "unlimited" keyword. There's no point in omitting the missing part first, and second with an upcoming change the part in parentheses will no longer be a fixed string, so doing a full match will ensure the algorithm correctly builds the message expected here. Also avoid any wildcard matches. 2022-06-29 Maciej W. Rozycki GDB: Remove extraneous full stops from `set' command error messages With errors given for bad commands such as `set annotate' or `set width' we produce an extraneous full stop within parentheses: (gdb) set annotate Argument required (integer to set it to.). (gdb) set width Argument required (integer to set it to, or "unlimited".). (gdb) This is grammatically incorrect, so remove the full stop and adjust the testsuite accordingly. 2022-06-29 Andrew Burgess gdb/doc: improve description of --data-disassemble opcodes output Extend the description of the MI command --data-disassemble. Specifically, expand the description of the 'opcodes' field to explain how the bytes are formatted. 2022-06-29 Yvan Roux gdb/arm: Only stack S16..S31 when FPU registers are secure The FPCCR.TS bit is used to identify if FPU registers are considered non-secure or secure. If they are secure, then callee saved registers (S16 to S31) are stacked on exception entry or otherwise skipped. 2022-06-29 Andrew Burgess opcodes/aarch64: split off creation of comment text in disassembler The function aarch64_print_operand (aarch64-opc.c) is responsible for converting an instruction operand into the textual representation of that operand. In some cases, a comment is included in the operand representation, though this (currently) only happens for the last operand of the instruction. In a future commit I would like to enable the new libopcodes styling for AArch64, this will allow objdump and GDB[1] to syntax highlight the disassembler output, however, having operands and comments combined in a single string like this makes such styling harder. In this commit, I propose to extend aarch64_print_operand to take a second buffer. Any comments for the instruction are written into this extra buffer. The two callers of aarch64_print_operand are then updated to pass an extra buffer, and print any resulting comment. In this commit no styling is added, that will come later. However, I have adjusted the output slightly. Before this commit some comments would be separated from the instruction operands with a tab character, while in other cases the comment was separated with two single spaces. After this commit I use a single tab character in all cases. This means a few test cases needed updated. If people would prefer me to move everyone to use the two spaces, then just let me know. Or maybe there was a good reason why we used a mix of styles, I could probably figure out a way to maintain the old output exactly if that is critical. Other than that, there should be no user visible changes after this commit. [1] GDB patches have not been merged yet, but have been posted to the GDB mailing list: https://sourceware.org/pipermail/gdb-patches/2022-June/190142.html 2022-06-29 Carl Love Andrew Burgess gdb/testsuite: fix gdb.base/break-idempotent.exp on ppc When running the gdb.base/break-idempotent.exp test on ppc, I was seeing some test failures (or rather errors), that looked like this: (gdb) watch local Hardware watchpoint 2: local has_hw_wp_support: Hardware watchpoint detected ERROR: no fileid for gcc2-power8 ERROR: Couldn't send delete breakpoints to GDB. ERROR OCCURED: can't read "gdb_spawn_id": no such variable while executing "expect { -i 1000 -timeout 100 -re ".*A problem internal to GDB has been detected" { fail "$message (GDB internal error)" gdb_internal_erro..." ("uplevel" body line 1) invoked from within What happens is that in break-idempotent.exp we basically do this: if {[prepare_for_testing "failed to prepare" $binfile $srcfile $opts]} { continue } # .... if {![skip_hw_watchpoint_tests]} { test_break $always_inserted "watch" } The problem with this is that skip_hw_watchpoint_tests, includes this: if { [istarget "i?86-*-*"] || [istarget "x86_64-*-*"] || [istarget "ia64-*-*"] || [istarget "arm*-*-*"] || [istarget "aarch64*-*-*"] || ([istarget "powerpc*-*-linux*"] && [has_hw_wp_support]) || [istarget "s390*-*-*"] } { return 0 } For powerpc only we call has_hw_wp_support. This is a caching proc that runs a test within GDB to detect if we have hardware watchpoint support or not. Unfortunately, to run this test we restart GDB, and when the test has completed, we exit GDB. This means that in break-idempotent.exp, when we call skip_hw_watchpoint_tests for the first time on powerpc, GDB will unexpectedly be exited. When we later call delete_breakpoints we see the errors I reported above. The fix is to call skip_hw_watchpoint_tests early, before we start GDB as part of the break-idempotent.exp script, and store the result in a variable, we can then check this variable in the script as needed. After this change break-idempotent.exp runs fine on powerpc. 2022-06-29 Jan Beulich x86: drop stray NoRex64 from XBEGIN Presumably this being there was a result of taking CALL as a reference when adding the RTM insns. But with No_qSuf the attribute has no effect. 2022-06-29 Vladimir Mezentsev gprofng: fix build when BUILD_MAN is false gprofng/ChangeLog 2022-06-28 Vladimir Mezentsev PR gprofng/29131 * gp-display-html/Makefile.am: Set man_MANS only when BUILD_MAN is true. * src/Makefile.am: Likewise. * gp-display-html/Makefile.in: Rebuild. * src/Makefile.in: Rebuild. 2022-06-29 Vladimir Mezentsev gprofng: use $(sysconfdir) instead $(prefix)/etc gprofng/ChangeLog 2022-06-28 Vladimir Mezentsev PR gprofng/29191 * src/Makefile.am: Use $(sysconfdir) instead $(prefix)/etc. * src/Settings.cc: Likewise. * src/Makefile.in: Rebuild. 2022-06-29 Alan Modra Re: ld/x86: skip p_align-1 tests with unsuitable compiler commit d0e0f9c87a3e results "ERROR: i586-linux-cc does not exist" if cross-building an i586-linux target without a target compiler installed. * testsuite/ld-elf/linux-x86.exp (compiler_honours_aligned): New. Use it after first testing check_compiler_available. 2022-06-29 GDB Administrator Automatic date update in version.in 2022-06-28 Pedro Alves gdb+gdbserver/Linux: avoid reading registers while going through shell For every stop, Linux GDB and GDBserver save the stopped thread's PC, in lwp->stop_pc. This is done in save_stop_reason, in both gdb/linux-nat.c and gdbserver/linux-low.cc. However, while we're going through the shell after "run", in startup_inferior, we shouldn't be reading registers, as we haven't yet determined the target's architecture -- the shell's architecture may not even be the same as the final inferior's. In gdb/linux-nat.c, lwp->stop_pc is only needed when the thread has stopped for a breakpoint, and since when going through the shell, no breakpoint is going to hit, we could simply teach save_stop_reason to only record the stop pc when the thread stopped for a breakpoint. However, in gdbserver/linux-low.cc, lwp->stop_pc is used in more cases than breakpoint hits (e.g., it's used in tracepoints & the "while-stepping" feature). So to avoid GDB vs GDBserver divergence, we apply the same approach to both implementations. We set a flag in the inferior (process in GDBserver) whenever it is being nursed through the shell, and when that flag is set, save_stop_reason bails out early. While going through the shell, we'll only ever get process exits (normal or signalled), random signals, and exec events, so nothing is lost. Change-Id: If0f01831514d3a74d17efd102875de7d2c6401ad 2022-06-28 Tom de Vries [gdb/build] Fix gdb build with -fsanitize=thread and gcc 7 When building gdb with system gcc 7.5.0, I run into: ... gdb/ia64-tdep.c: In function ‘int is_float_or_hfa_type_recurse(type*, type**)’: gdb/ia64-tdep.c:3362:1: error: control reaches end of non-void function \ [-Werror=return-type] ... This is due to PR gcc/81275 - "-fsanitize=thread produce incorrect -Wreturn-type warning", which has been fixed in gcc-8. Work around this by moving the default return outside the switch. Tested on x86_64-linux. 2022-06-28 Clément Chigot bfd: handle codepage when opening files on MinGW Even if MS docs say that CP_UTF8 should always be used on newer applications, forcing it might produce undefined filename if the encoding isn't UTF-8. MinGW seems to call ___lc_codepage_func() in order to retrieve the current thread codepage. bfd/ChangeLog: * bfdio.c (_bfd_real_fopen): Retrieve codepage with ___lc_codepage_func() on MinGW. 2022-06-28 Clément Chigot windres: add quotes around preprocessor cmd if needed This patch ensures that the gcc binary called by windres is quoted if needed. Otherwise, errors can occur if the gcc is under a folder having a name containing a space (eg "Program Files"). binutils/ * resrc.c (DEFAULT_PREPROCESSOR): Split into... (DEFAULT_PREPROCESSOR_CMD): that... (DEFAULT_PREPROCESSOR_ARGS): and that. (look_for_default): Add quotes around the command if needed. (read_rc_file): Adapt to new defines. 2022-06-28 Nick Clifton Fix the display of the idnex values for DW_FORM_loclistx and DW_FORM_rnglistx. Correct the display of .debug.loclists sections. PR 29267 * dwarf.c (display_debug_rnglists): New function, broken out of.. (display_debug_ranges): ... here. (read_and_display_attr_value): Correct calculation of index displayed for DW_FORM_loclistx and DW_FORM_rnglistx. * testsuite/binutils-all/x86-64/pr26808.dump: Update expected output. 2022-06-28 Jan Beulich ld/x86: skip p_align-1 tests with unsuitable compiler When the compiler doesn't properly arrange for foo's alignment, there's no point even trying these tests. Report the situation as a single "unsupported" test. 2022-06-28 Alan Modra PowerPC64: align plt_branch stubs plt_branch stubs are similar to plt_call stubs in that they branch via bctr. Align them too. bfd/ * elf64-ppc.c (ppc_size_one_stub): Align plt_branch stubs as for plt_call stubs. ld/ * testsuite/ld-powerpc/elfv2exe.d: Adjust for plt_branch changes. * testsuite/ld-powerpc/notoc.d: Likewise. * testsuite/ld-powerpc/notoc.wf: Likewise. * testsuite/ld-powerpc/notoc3.d: Likewise. * testsuite/ld-powerpc/pr23937.d: Likewise. 2022-06-28 Alan Modra PowerPC64: plt_stub_pad * elf64-ppc.c (plt_stub_pad): Simplify parameters and untangle from plt_stub_size. (ppc_size_one_stub): Call plt_stub_size before plt_stub_pad to provide size. Recalculate size if it might change. 2022-06-28 Alan Modra PowerPC64: Tidy stub type changes It made sense before I started using separate fields for main type and sub type to add a difference in main type to the type (thus keeping sub type unchanged). Not so much now. * elf64-ppc.c (ppc_merge_stub): Simplify stub type change. (ppc_size_one_stub): Likewise. 2022-06-28 Jiangshuai Li gdb:csky add pseudo regs for float and vector regs In the existing CSKY architecture, there are at most 32 floating and 16 vector registers. Float registers's count can be configured as 16 or 32. In the future, the vector registers's count may be extended to 32. The bit width of floating-point register is 64bits, and the bit width of vector register is 128bit. Special points: in fr0~fr15 and vr0~vr15, each FRx is the lower 64 bits of the corresponding VRx. Here, we will split each floating-point and vector register to 32bits wide, add the corresponding pseudo registers, and finally use them for the dwarf registers. There are 128 pseudo registers in total, s0~s127, including: 1. s0 and s1 correspond to fr0, s4 and s5 correspond to fr1, and so on. Every two separated pseudo registers correspond to a float register. 2. s0, s1, s2 and s3 correspond to vr0; s4, s5, s6 and s7 correspond to vr1, and so on. Every four pseudo registers corresponds to a vector register. Therefore, in s64~s127, there are general registers that are not actually used. This part is to prepare for the expansion of vector registers to 32 Therefore, in s64~s127, half of the registers are actually unused. This part is to prepare for the expansion of the vector register to 32. 2022-06-28 Pekka Seppänen PR29293, elfnn-aarch64.c: def_protected member unintialized PR 29293 * elfnn-aarch64.c (elfNN_aarch64_link_hash_newfunc): Init def_protected. 2022-06-28 Tsukasa OI RISC-V: Add 'Sstc' extension and its CSRs This commit adds "stimecmp / vstimecmp" Extension (Sstc) and its CSRs. bfd/ChangeLog: * elfxx-riscv.c (riscv_supported_std_s_ext): Add 'Sstc' extension to valid 'S' extension list. gas/ChangeLog: * config/tc-riscv.c (enum riscv_csr_class): Add CSR classes for 'Sstc' extension. (riscv_csr_address): Add handling for new CSR classes. * testsuite/gas/riscv/csr-dw-regnums.s: Add new CSRs. * testsuite/gas/riscv/csr-dw-regnums.d: Likewise. * testsuite/gas/riscv/csr.s: Add new CSRs. * testsuite/gas/riscv/csr-version-1p9p1.d: Likewise. * testsuite/gas/riscv/csr-version-1p9p1.l: Likewise. * testsuite/gas/riscv/csr-version-1p10.d: Likewise. * testsuite/gas/riscv/csr-version-1p10.l: Likewise. * testsuite/gas/riscv/csr-version-1p11.d: Likewise. * testsuite/gas/riscv/csr-version-1p11.l: Likewise. * testsuite/gas/riscv/csr-version-1p12.d: Likewise. * testsuite/gas/riscv/csr-version-1p12.l: Likewise. include/ChangeLog: * opcode/riscv-opc.h (CSR_STIMECMP, CSR_STIMECMPH, CSR_VSTIMECMP, CSR_VSTIMECMPH): New CSR macros. 2022-06-28 Tsukasa OI RISC-V: Add 'Sscofpmf' extension with its CSRs This commit adds Count Overflow and Mode-Based Filtering Extension (Sscofpmf) and its CSRs. bfd/ChangeLog: * elfxx-riscv.c (riscv_supported_std_s_ext): Add 'Sscofpmf' extension to valid 'S' extension list. gas/ChangeLog: * config/tc-riscv.c (enum riscv_csr_class): Add CSR classes for 'Sscofpmf' extension. (riscv_csr_address): Add handling for new CSR classes. * testsuite/gas/riscv/csr-dw-regnums.s: Add new CSRs. * testsuite/gas/riscv/csr-dw-regnums.d: Likewise. * testsuite/gas/riscv/csr.s: Add new CSRs. * testsuite/gas/riscv/csr-version-1p9p1.d: Likewise. * testsuite/gas/riscv/csr-version-1p9p1.l: Likewise. * testsuite/gas/riscv/csr-version-1p10.d: Likewise. * testsuite/gas/riscv/csr-version-1p10.l: Likewise. * testsuite/gas/riscv/csr-version-1p11.d: Likewise. * testsuite/gas/riscv/csr-version-1p11.l: Likewise. * testsuite/gas/riscv/csr-version-1p12.d: Likewise. * testsuite/gas/riscv/csr-version-1p12.l: Likewise. include/ChangeLog: * opcode/riscv-opc.h (CSR_SCOUNTOVF, CSR_MHPMEVENT3H, CSR_MHPMEVENT4H, CSR_MHPMEVENT5H, CSR_MHPMEVENT6H, CSR_MHPMEVENT7H, CSR_MHPMEVENT8H, CSR_MHPMEVENT9H, CSR_MHPMEVENT10H, CSR_MHPMEVENT11H, CSR_MHPMEVENT12H, CSR_MHPMEVENT13H, CSR_MHPMEVENT14H, CSR_MHPMEVENT15H, CSR_MHPMEVENT16H, CSR_MHPMEVENT17H, CSR_MHPMEVENT18H, CSR_MHPMEVENT19H, CSR_MHPMEVENT20H, CSR_MHPMEVENT21H, CSR_MHPMEVENT22H, CSR_MHPMEVENT23H, CSR_MHPMEVENT24H, CSR_MHPMEVENT25H, CSR_MHPMEVENT26H, CSR_MHPMEVENT27H, CSR_MHPMEVENT28H, CSR_MHPMEVENT29H, CSR_MHPMEVENT30H, CSR_MHPMEVENT31H): New CSR macros. 2022-06-28 Tsukasa OI RISC-V: Add 'Smstateen' extension and its CSRs This commit adds State Enable Extension (Smstateen) and its CSRs. bfd/ChangeLog: * elfxx-riscv.c (riscv_supported_std_s_ext): Add 'Smstateen' extension to valid 'S' extension list. gas/ChangeLog: * config/tc-riscv.c (enum riscv_csr_class): Add CSR classes for 'Smstateen' extension. (riscv_csr_address): Add handling for new CSR classes. * testsuite/gas/riscv/csr-dw-regnums.s: Add new CSRs. * testsuite/gas/riscv/csr-dw-regnums.d: Likewise. * testsuite/gas/riscv/csr.s: Add new CSRs. * testsuite/gas/riscv/csr-version-1p9p1.d: Likewise. * testsuite/gas/riscv/csr-version-1p9p1.l: Likewise. * testsuite/gas/riscv/csr-version-1p10.d: Likewise. * testsuite/gas/riscv/csr-version-1p10.l: Likewise. * testsuite/gas/riscv/csr-version-1p11.d: Likewise. * testsuite/gas/riscv/csr-version-1p11.l: Likewise. * testsuite/gas/riscv/csr-version-1p12.d: Likewise. * testsuite/gas/riscv/csr-version-1p12.l: Likewise. include/ChangeLog: * opcode/riscv-opc.h (CSR_MSTATEEN0, CSR_MSTATEEN1, CSR_MSTATEEN2, CSR_MSTATEEN3, CSR_SSTATEEN0, CSR_SSTATEEN1, CSR_SSTATEEN2, CSR_SSTATEEN3, CSR_HSTATEEN0, CSR_HSTATEEN1, CSR_HSTATEEN2, CSR_HSTATEEN3, CSR_MSTATEEN0H, CSR_MSTATEEN1H, CSR_MSTATEEN2H, CSR_MSTATEEN3H, CSR_HSTATEEN0H, CSR_HSTATEEN1H, CSR_HSTATEEN2H, CSR_HSTATEEN3H): New CSR macros. 2022-06-28 Tsukasa OI RISC-V: Add new CSR feature gate handling (RV32,H) To support feature gate like Smstateen && H, this commit adds certain CSR feature gate handling. It also changes how RV32-only CSRs are handled for cleanliness. gas/ChangeLog: * config/tc-riscv.c (riscv_csr_address): Add CSR feature gate handling for H. Change handling on RV32. 2022-06-28 Alan Modra Re: Disable execstack and rwx segments warnings for MIPS targets. PR 29263 * configure.ac: Fix typo. * testsuite/ld-elf/elf.exp: Add mips to targets that need --warn-execstack to pass first pr29072 test. 2022-06-28 GDB Administrator Automatic date update in version.in 2022-06-27 Bruno Larsen gdb/testsuite: update bug numbers from Gnats to bugzilla Some tests link to outdated bug numbers when an XFAIL or a KFAIL happen. gdb.base/macscp.exp was referencing bug number 555, and the bug 7660 mentions that it used to be 555 on the Gnats system and seems to relate to the issue at hand. gdb.base/annota1.exp was referencing bug number 1270, and bug 8375 mentions being number 1270 on Gnats, and mentions annota1 specifically, so it seemed pretty obvious. 2022-06-27 Tom de Vries [gdb/build] Fix build breaker with --enable-shared When building gdb with --enable-shared, I run into: ... ld: build/zlib/libz.a(libz_a-inffast.o): relocation R_X86_64_32S against \ `.rodata' can not be used when making a shared object; recompile with -fPIC ld: build/zlib/libz.a(libz_a-inflate.o): warning: relocation against \ `inflateResetKeep' in read-only section `.text' collect2: error: ld returned 1 exit status make[3]: *** [libbfd.la] Error 1 ... This is a regression since commit a08bdb159bb ("[gdb/build] Fix gdbserver build with -fsanitize=thread"). The problem is that a single case statement in configure is shared to handle special requirements for both the host libiberty and host zlib, which has the effect that only one is handled. Fix this by handling libiberty and zlib each in its own case statement. Build on x86_64-linux, with and without --enable-shared. ChangeLog: 2022-06-27 Tom de Vries * configure.ac: Set extra_host_libiberty_configure_flags and extra_host_zlib_configure_flags in separate case statements. * configure: Regenerate. 2022-06-27 Pedro Alves Make GDBserver abort on internal error in development mode Currently, if GDBserver hits some internal assertion, it exits with error status, instead of aborting. This makes it harder to debug GDBserver, as you can't just debug a core file if GDBserver fails an assertion. I've had to hack the code to make GDBserver abort to debug something several times before. I believe the reason it exits instead of aborting, is to prevent potentially littering the filesystem of smaller embedded targets with core files. I think I recall Daniel Jacobowitz once saying that many years ago, but I can't be sure. Anyhow, that seems reasonable to me. Since we nowadays have a distinction between development and release modes, I propose to make GDBserver abort on internal error if in development mode, while keeping the status quo when in release mode. Thus, after this patch, in development mode, you get: $ ../gdbserver/gdbserver ../../src/gdbserver/server.cc:3711: A problem internal to GDBserver has been detected. captured_main: Assertion `0' failed. Aborted (core dumped) $ while in release mode, you'll continue to get: $ ../gdbserver/gdbserver ../../src/gdbserver/server.cc:3711: A problem internal to GDBserver has been detected. captured_main: Assertion `0' failed. $ echo $? 1 I do not think that this requires a separate configure switch. A "--target_board=native-extended-gdbserver" run on Ubuntu 20.04 ends up with: === gdb Summary === # of unexpected core files 29 ... for me, of which 8 are GDBserver core dumps, 7 more than without this patch. Change-Id: I6861e08ad71f65a0332c91ec95ca001d130b0e9d 2022-06-27 Nick Clifton Replace a run-time assertion failure with a warning message when parsing corrupt DWARF data. PR 29289 * dwarf.c (display_debug_names): Replace assert with a warning message. Fix NULL pointer indirection when parsing corrupt DWARF data. PR 29290 * dwarf.c (read_and_display_attr_value): Check that debug_info_p is set before dereferencing it. Have gold's File_read::do_read() function check the start parameter PR 23765 * fileread.cc (File_read::do_read): Check start parameter before computing number of bytes to read. 2022-06-27 Yvan Roux gdb/arm: Unwind Non-Secure callbacks from Secure Without this changeset, the unwinding doesn't take into account Non-Secure to Secure stack unwinding enablement status and doesn't choose the proper SP to do the unwinding. This patch only unwinds the stack when Non-Secure to Secure unwinding is enabled, previous SP is set w/r to the current mode (Handler -> msp_s, Thread -> psp_s) and then the Secure stack is unwound. Ensure thumb bit is set in PSR when needed. Also, drop thumb bit from PC if set. 2022-06-27 Nick Clifton Stop bogus warnings about DWARF indexed string offsets being too big. * dwarf.c (fetch_indexed_string): Do not use length of first table in string section as the length of every table in the section. * testsuite/binutils-all/pr26112.r: Update expected output. 2022-06-27 Tom de Vries [gdb/testsuite] Handle older python in gdb.python/py-send-packet.py With python 3.4, I run into: ... Traceback (most recent call last):^M File "", line 1, in ^M File "outputs/gdb.python/py-send-packet/py-send-packet.py", line 128, in \ run_set_global_var_test^M res = conn.send_packet(b"X%x,4:\x02\x02\x02\x02" % addr)^M TypeError: Could not convert Python object: b'X%x,4:\x02\x02\x02\x02'.^M Error while executing Python code.^M ... while with python 3.6 this works fine. The type of addr is , so the first thing to try is whether changing it into a string works: ... addr_str = "%x" % addr res = conn.send_packet(b"X%s,4:\x02\x02\x02\x02" % addr_str) ... which gets us the more detailed: ... TypeError: unsupported operand type(s) for %: 'bytes' and 'str' ... Fix this by avoiding the '%' operator in the byte literal, and use instead: ... def xpacket_header (addr): return ("X%x,4:" % addr).encode('ascii') ... res = conn.send_packet(xpacket_header(addr) + b"\x02\x02\x02\x02") ... Tested on x86_64-linux, with python 3.4 and 3.6, and a backported version was tested on the gdb-12-branch in combination with python 2.7. 2022-06-27 Tom de Vries [gdb/testsuite] Fix gdb.reverse/i387-env-reverse.exp for -pie When running test-case gdb.reverse/i387-env-reverse.exp for x86_64-linux with target board unix/-m32/-fPIE/-pie, we run into: ... (gdb) PASS: gdb.reverse/i387-env-reverse.exp: push st0 info register eax^M eax 0x56550000 1448411136^M (gdb) FAIL: gdb.reverse/i387-env-reverse.exp: verify eax == 0x8040000 ... The problem is that the tested instruction (fstsw) only sets $ax, not $eax. Fix this by verifying $ax instead of $eax. Tested on x86_64-linux with target boards unix/-m32 and unix/-m32/-fPIE/-pie. 2022-06-27 Tom de Vries [gdb/testsuite] Enable some test-cases for x86_64 -m32 When trying to run test-case gdb.reverse/i387-env-reverse.exp for x86_64-linux with target board unix/-m32, it's skipped. Fix this by using is_x86_like_target instead of istarget "i?86-*linux*". This exposes a number of duplicates, fix those by making the test names unique. Likewise in a couple of other test-cases. Tested on x86_64-linux with target boards unix/-m32. 2022-06-27 Tom de Vries [gdb/testsuite] Workaround unnecessary .s file with gfortran 4.8 After running test-case gdb.fortran/namelist.exp with gfortran 4.8.5, I'm left with: ... $ git sti On branch master Your branch is up to date with 'origin/master'. Untracked files: (use "git add ..." to include in what will be committed) gdb/testsuite/lib/compiler.s nothing added to commit but untracked files present (use "git add" to track) ... We're running into PR gcc/60447, which was fixed in gcc 4.9.0. Workaround this by first copying the source file to the temp dir, such that the .s file is left there instead: ... $ ls build/gdb/testsuite/temp// compiler.c compiler.F90 compiler.s ... Tested on x86_64-linux. 2022-06-27 Tom de Vries [gdb/testsuite] Skip gdb.fortran/namelist.exp for gfortran 4.8 The test-case gdb.fortran/namelist.exp uses a gfortran feature (emitting DW_TAG_namelist in the debug info) that has been supported since gfortran 4.9, see PR gcc/37132. Skip the test for gfortran 4.8 and earlier. Do this using gcc_major_version, and update it to be able to handle "gcc_major_version {gfortran-*} f90". Tested on x86_64-linux, with gfortran 4.8.5, 7.5.0, and 12.1.1. 2022-06-27 Tom de Vries [gdb/symtab] Fix parsing of .debug_str_offsets header When running test-case gdb.dwarf2/fission-mix.exp with target board dwarf64 and gcc-12 (defaulting to DWARF5), I run into: ... (gdb) break func2^M Offset from DW_FORM_GNU_str_index or DW_FORM_strx pointing outside of \ .debug_str.dwo section in CU at offset 0x0 [in module fission-mix]^M (gdb) FAIL: gdb.dwarf2/fission-mix.exp: break func2 ... The .debug_str_offsets section has version 5, so as per the standard it has it's own header, with initial length and version: ... Contents of the .debug_str_offsets.dwo section (loaded from fission-mix2.dwo): Length: 0x1c Version: 0x5 Index Offset [String] 0 0 build/gdb/testsuite 1 33 GNU C17 2 8f src/gdb/testsuite/gdb.dwarf2/fission-mix-2.c ... But when trying to read the string offset at index 0 in the table (which is 0), we start reading at offset 8, which points in the header, at the last 4 bytes of the initial length (it's 12 bytes because of 64-bit dwarf), as well at the 2-byte version field and 2 bytes of padding, so we get: ... (gdb) p /x str_offset $1 = 0x500000000 ... which indeed is an offset that doesn't fit in the .debug_str section. The offset 8 is based on reader->cu->header.addr_size: ... static const char * read_dwo_str_index (const struct die_reader_specs *reader, ULONGEST str_index) { ULONGEST str_offsets_base = reader->cu->header.version >= 5 ? reader->cu->header.addr_size : 0; ... which doesn't in look in agreement with the standard. Note that this happens to give the right answer for 32-bit dwarf and addr_size == 8, because then we have header size == (initial length (4) + version (2) + padding (2)) == 8. Conversely, for 32-bit dwarf and addr_size == 4 (target board unix/-m32) we run into a similar problem. It just happens to not trigger the warning, instead we get the wrong strings, like "func2" for DW_AT_producer and "build/gdb/testsuite" for DW_AT_name of the DW_TAG_compile_unit DIE. Fix this by parsing the .debug_str_offsets header in read_dwo_str_index. Add a FIXME that we should not parse this for every call. Tested on x86_64-linux. 2022-06-27 Tom de Vries [gdb/build] Fix gdbserver build with -fsanitize=thread [ Copied from gcc commit 153689603fd ("[gdb/build] Fix gdbserver build with -fsanitize=thread"). ] When building gdbserver with -fsanitize=thread (added to CFLAGS/CXXFLAGS) we run into: ... ld: ../libiberty/libiberty.a(safe-ctype.o): warning: relocation against \ `__tsan_init' in read-only section `.text' ld: ../libiberty/libiberty.a(safe-ctype.o): relocation R_X86_64_PC32 \ against symbol `__tsan_init' can not be used when making a shared object; \ recompile with -fPIC ld: final link failed: bad value collect2: error: ld returned 1 exit status make[1]: *** [libinproctrace.so] Error 1 ... which looks similar to what is described in commit 78e49486944 ("[gdb/build] Fix gdbserver build with -fsanitize=address"). The gdbserver component builds a shared library libinproctrace.so, which uses libiberty and therefore requires the pic variant. The gdbserver Makefile is setup to use this variant, if available, but it's not there. Fix this by listing gdbserver in the toplevel configure alongside libcc1, as a component that needs the libiberty pic variant, setting: ... extra_host_libiberty_configure_flags=--enable-shared ... Tested on x86_64-linux. ChangeLog: 2022-06-27 Tom de Vries * configure.ac: Build libiberty pic variant for gdbserver. * configure: Regenerate. 2022-06-27 Nick Clifton Disable execstack and rwx segments warnings for MIPS targets. PR 29263 * configure.ac: Move HPPA specific code from here... * configure.tgt: ... to here. Add similar code for MIPS. Move code for CRIS, MIPS and HPPA to block at start of file. * configure: Regenerate. 2022-06-27 Jan Beulich bfd: prune config.bfd's setting of targ_archs The final "match all" case can take care of a few explicit entries: Purge those. Also move s12z* into proper position (the table is otherwise sorted, after all). 2022-06-27 Jan Beulich drop XC16x bits Commit 04f096fb9e25 ("Move the xc16x target to the obsolete list") moved the architecture from the "obsolete but still available" to the "obsolete / support removed" list in config.bfd, making the architecture impossible to enable (except maybe via "enable everything" options"). Note that I didn't touch */po/*.po{,t} on the assumption that these would be updated by some (half)automatic means. 2022-06-27 Bhuvanendra Kumar N Fix location list offset address dump under DW_AT_location (dwarf-5) For clang compiled objects with dwarf-5, location list offset address dump under DW_AT_location is corrected, where DW_FORM_loclistx is used. While dumping the location list offset, the address dumped is wrong where it was refering to .debug_addr instead of .debug_loclists * dwarf.c (fetch_indexed_value): Add base_address as parameter and use it to access the section offset. (read_and_display_attr_value): Handle DW_FORM_loclistx form separately. Pass loclists_base to fetch_indexed_value(). 2022-06-27 Alan Modra PowerPC64 .branch_lt address .branch_lt is really an extension of .plt, as is .iplt. We'd like all of the PLT sections to be fixed relative to .TOC. after stub sizing, because changes in offset to PLT entries might mean a change in stub sizes. When -z relro, the relro layout does this by laying out sections from the end of the relro segment. So for example, a change in .eh_frame (which happens after stub sizing) will keep the same GOT to PLT offset when -z relro. Not so when -z norelro, because then the usual forward layout of section is done and .got is more aligned than .branch_lt. * emulparams/elf64ppc.sh: Set .branch_lt address fixed relative to .got. * testsuite/ld-powerpc/elfv2exe.d: Adjust to suit. 2022-06-27 Alan Modra -z relro relaxation and ld script SIZEOF A number of targets use assignments like: . = DATA_SEGMENT_RELRO_END (SIZEOF (.got.plt) >= 12 ? 12 : 0, .); (from i386) in linker scripts to put the end of the relro segment past the header in .got.plt. Examination of testcases like those edited by this patch instead sees the end of the relro segment being placed at the start of .got.plt. For the i386 pie1 test: [ 9] .got.plt PROGBITS 00002000 001000 00000c 04 WA 0 0 4 GNU_RELRO 0x000f90 0x00001f90 0x00001f90 0x00070 0x00070 R 0x1 A map file shows: .dynamic 0x0000000000001f90 0x70 *(.dynamic) .dynamic 0x0000000000001f90 0x70 tmpdir/pie1.o 0x0000000000001f90 _DYNAMIC .got 0x0000000000002000 0x0 *(.got) .got 0x0000000000002000 0x0 tmpdir/pie1.o *(.igot) 0x0000000000002ff4 . = DATA_SEGMENT_RELRO_END (., (SIZEOF (.got.plt) >= 0xc)?0xc:0x0) .got.plt 0x0000000000002000 0xc *(.got.plt) .got.plt 0x0000000000002000 0xc tmpdir/pie1.o 0x0000000000002000 _GLOBAL_OFFSET_TABLE_ The DATA_SEGMENT_RELRO_END value in the map file is weird too. All of this is triggered by SIZEOF (.got.plt) being evaluated wrongly as zero. Fix it by taking into account the action of lang_reset_memory_regions during relaxation. * ldexp.c (fold_name ): Use rawsize if size has been reset. * ldlang.c (lang_size_sections_1): Don't reset processed_vma here. * testsuite/ld-i386/pie1.d: Adjust to suit. * testsuite/ld-x86-64/pr20830a.d: Likewise. * testsuite/ld-x86-64/pr20830b.d: Likewise. * testsuite/ld-x86-64/pr21038a.d: Likewise. * testsuite/ld-x86-64/pr21038b.d: Likewise. * testsuite/ld-x86-64/pr21038c.d: Likewise. 2022-06-27 GDB Administrator Automatic date update in version.in 2022-06-26 GDB Administrator Automatic date update in version.in 2022-06-25 Fangrui Song arm: Define elf_backend_extern_protected_data to 0 [PR 18705] Similar to commit 4fb55bf6a9606eb7b626c30a9f4e71d6c2d4fbb2 for aarch64. Commit b68a20d6675f1360ea4db50a9835c073675b9889 changed ld to produce R_ARM_GLOB_DAT but that defeated the purpose of protected visibility as an optimization. Restore the previous behavior (which matches ld.lld) by defining elf_backend_extern_protected_data to 0. 2022-06-25 Tom Tromey Fix corrupt DWARF in dw2-double-set-die-type The dw2-double-set-die-type.exp test case caused an AddressSanitizer failure in the new DWARF scanner. The immediate cause was bad DWARF in the test -- in particular, the the sibling attribute here: <2><181>: Abbrev Number: 33 (DW_TAG_subprogram) <182> DW_AT_external : 1 <183> DW_AT_name : address <18b> DW_AT_type : <0x171> <18f> DW_AT_declaration : 1 <190> DW_AT_sibling : <0x1a1> ... <1><1a1>: Abbrev Number: 23 (DW_TAG_pointer_type) <1a2> DW_AT_byte_size : 4 <1a3> DW_AT_type : <0x1a7> ...points to a "sibling" DIE that is at a different child depth. Because this test case doesn't really require sibling attributes, this patch fixes the problem by removing them from the test. Note that gdb is not generally robust against malformed DWARF. Detecting and compensating for this problem would probably be expensive and, IMO, is better left to some (still hypothetical) DWARF linter. 2022-06-25 Tom Tromey Fix end of CU calculation in cooked_indexer::index_dies cooked_indexer::index_dies incorrect computes the end of the current CU in the .debug_info. This isn't readily testable without writing intentionally corrupt DWARF, but it's apparent through observation: it is currently based on 'info_ptr', which does not always point to the start of the CU. This patch fixes the expression. Tested on x86-64 Fedora 34. 2022-06-25 Tiezhu Yang gdb: LoongArch: Implement loongarch_linux_syscall_next_pc() When FRAME is at a syscall instruction, return the PC of the next instruction to be executed. gdb: LoongArch: Define register numbers and clean up code This commit defines register numbers of various important registers, we can use them directly in the related code, and also clean up some code to make them more clear and readable. 2022-06-25 GDB Administrator Automatic date update in version.in 2022-06-24 Pedro Alves Eliminate TUI/CLI observers duplication For historical reasons, the CLI and the TUI observers are basically exact duplicates, except for the downcast: cli: struct cli_interp *cli = as_cli_interp (interp); tui: struct interp *tui = as_tui_interp (interp); and how they get at the interpreter's ui_out: cli: cli->cli_uiout tui: tui->interp_ui_out () Since interp_ui_out() is a virtual method that also works for the CLI interpreter, and, both the CLI and the TUI interpreters inherit from the same base class (cli_interp_base), we can convert the CLI observers to cast to cli_interp_base instead and use interp_ui_out() too. With that, the CLI observers will work for the TUI interpreter as well. This lets us completely eliminate the TUI observers. That's what this commit does. Change-Id: Iaf6cf12dfa200ed3ab203a895a72b69dfedbd6e0 2022-06-24 Pedro Alves Revert "Delete delete_thread_silent" Turns out we'll be gaining a new use of this function very soon, the incoming AMDGPU port needs it. Let's add it back, as it isn't really hurting anything. This reverts commit 39b8a8090ed7e8967ceca3655aa5f3a2ae91219d. 2022-06-24 Yvan Roux gdb/arm: Update the value of active sp when base sp changes For Arm Cortex-M33 with security extensions, there are 4 different stacks pointers (msp_s, msp_ns, psp_s, psp_ns). When plain "sp" is updated during unwinding of the stack, the active stack pointer of the 4 stack pointers needs to be kept in sync. 2022-06-24 Andrew Burgess gdb/testsuite: remove unneeded calls to get_compiler_info It is not necessary to call get_compiler_info before calling test_compiler_info, and, after recent commits that removed setting up the gcc_compiled, true, and false globals from get_compiler_info, there is now no longer any need for any test script to call get_compiler_info directly. As a result every call to get_compiler_info outside of lib/gdb.exp is redundant, and this commit removes them all. There should be no change in what is tested after this commit. 2022-06-24 Andrew Burgess gdb/testsuite: remove global gcc_compiled from gdb.exp After this commit the gcc_compiled global is no longer exported from lib/gdb.exp. In theory we could switch over all uses of gcc_compiled to instead call test_compiler_info directly, however, I have instead added a new proc to gdb.exp: 'is_c_compiler_gcc'. I've then updated the testsuite to call this proc instead of using the global. Having a new proc specifically for this task means that we have a single consistent pattern for detecting gcc. By wrapping this logic within a proc that calls test_compiler_info, rather than using the global, means that test scripts don't need to call get_compiler_info before they read the global, simply calling the new proc does everything in one go. As a result I've been able to remove the get_compiler_info calls from all the test scripts that I've touched in this commit. In some of the tests e.g. gdb.dwarf2/*.exp, the $gcc_compiled flag was being checked at the top of the script to decide if the whole script should be skipped or not. In these cases I've called the new proc directly and removed all uses of gcc_compiled. In other cases, e.g. most of the gdb.base scripts, there were many uses of gcc_compiled. In these cases I set a new global gcc_compiled near the top of the script, and leave the rest of the script unchanged. There should be no changes in what is tested after this commit. 2022-06-24 Pedro Alves Include count of unexpected core files in gdb.sum summary If GDB, GDBserver, a testcase program, Valgrind, etc. unexpectedly crash while running the GDB testsuite, and you've setup your machine such that core files are dumped in the current directory instead of being shoved somewhere by abrt, apport, or similar (as you should for proper GDB testing), you'll end up with an unexpected core file in the $build/gdb/testsuite/ directory. It can happen that GDB, GDBserver, etc. even crashes _after_ gdb_exit, during teardown, and thus such a crash won't be noticed by looking at the gdb.sum file at all. This commit aims at improving that, by including a new "unexpected core files" line in the testrun summary. For example, here's what I get on x86-64 Ubuntu 20.04, with this patch: === gdb Summary === # of unexpected core files 12 << new info # of expected passes 107557 # of unexpected failures 35 # of expected failures 77 # of unknown successes 2 # of known failures 114 # of untested testcases 31 # of unsupported tests 139 I have my core pattern setup like this: $ cat /proc/sys/kernel/core_pattern core.%e.%p.%h.%t That's: %e: executable filename %p: pid %h: hostname %t: UNIX time of dump and so I get these core files: $ ls -1 testsuite/core.* testsuite/core.connect-with-no.216191.nelson.1656002431 testsuite/core.connect-with-no.217729.nelson.1656002431 testsuite/core.gdb.194247.nelson.1656002423 testsuite/core.gdb.226014.nelson.1656002435 testsuite/core.gdb.232078.nelson.1656002438 testsuite/core.gdb.352268.nelson.1656002441 testsuite/core.gdb.4152093.nelson.1656002337 testsuite/core.gdb.4154515.nelson.1656002338 testsuite/core.gdb.4156668.nelson.1656002339 testsuite/core.gdb.4158871.nelson.1656002341 testsuite/core.gdb.468495.nelson.1656002444 testsuite/core.vgdb.4192247.nelson.1656002366 where we can see that GDB crashed a number of times, but also Valgrind's vgdb, and a couple testcase programs. Neither of which is good. If your core_pattern is just "core" (but why??), then I guess that you may end up with just a single core file in testsuite/. Still, that is one core file too many. Above, we see a couple cores for "connect-with-no", which are the result of gdb.server/connect-with-no-symbol-file.exp. This is a case mentioned above -- while the program crashed, that happens during testcase teardown, and it goes unnoticed (without this commit) by gdb.sum results. Vis: $ make check TESTS="gdb.server/connect-with-no-symbol-file.exp" ... === gdb Summary === # of unexpected core files 2 # of expected passes 8 ... $ The tests fully passed, but still the testcase program crashed somehow: $ ls -1 testsuite/core.* testsuite/core.connect-with-no.941561.nelson.1656003317 testsuite/core.connect-with-no.941682.nelson.1656003317 Against --target_board=native-extended-gdbserver it's even worse. I get: # of unexpected core files 26 and note that when GDBserver hits an assertion failure, it exits with error, instead of crashing with SIGABRT. I think that should be changed, at least on development builds, but that would be for another patch. After such patch, I suspect the number of unexpected cores will be higher, as there are likely teardown GDBserver assertions that we're not noticing. I decided to put this new info in the "gdb Summary" section, as that's a place people already are used to looking at, either when looking at the tail of gdb.sum, or when diffing gdb.sum files, and we've already extended this section before, to include the count of DUPLICATE and PATH problems, so there's precedent. Implementation-wise, the new line is appended after DejaGnu is finished, with a shell script that is invoked by the Makefile. It is done this way so that serial and parallel testing work the same way. My initial cut at an implementation was in TCL, straight in testsuite/lib/check-test-names.exp, where DUPLICATES and PATH are handled, like so: @@ -148,6 +159,10 @@ namespace eval ::CheckTestNames { $counts(paths,$which) maybe_show_count "# of duplicate test names\t" \ $counts(duplicates,$which) + + set cores [glob -nocomplain -directory $::objdir core*] + maybe_show_count "# of unexpected core files\t" \ + [llength $cores] } But that would only work for serial testing, as in parallel testing, the final gdb.sum is generated by aggregating the results of all the individual gdb.sum files, and dg-extract-results.sh doesn't know about our new summary line. And I don't think that dg-extract-results.sh should be taught about it, since the count of core files is not something that we want to count many times, once per testcase, and then add up the subcounts at the end. Every time we count the core files, we're already counting the final count. I considered using the Tcl implementation in serial mode, and the script approach for parallel testing, but that has the obvious downside of implementing and maintaining the same thing twice. In the end, I settled on the script approach for serial mode too, which requires making the "check-single" rule print the tail end of the gdb.sum file, with a side effect being that if you look at the terminal after a run (instead of at the gdb.sum file), you'll see the "gdb Summary" section twice, once without the unexpected core lines printed, and then another with. IMO, this isn't an issue; when testing in parallel mode, if you look at the terminal after "make -jN check", you'll also see multiple "gdb Summary" sections printed. Change-Id: I190b8d41856d49ad143854b6e3e6ccd7caa04491 2022-06-24 Pedro Alves Improve core file path detection & put cores in output dir After a testrun, I noticed that I have some kernel-produced cores for testcase programs, under build/gdb/testsuite/, which shouldn't be there: $ ls -1 testsuite/core.* testsuite/core.annota1.1274351.nelson.1656004407 testsuite/core.annota3.1288474.nelson.1656004414 testsuite/core.exitsignal.1240674.nelson.1656004391 I have my core pattern setup like this: $ cat /proc/sys/kernel/core_pattern core.%e.%p.%h.%t That's: %e: executable filename %p: pid %h: hostname %t: UNIX time of dump so it's easy to tell which program produced the core from the core file name. From above, we can tell that the corresponding testcases are gdb.base/annota1.exp, gdb.base/annota3.exp and gdb.base/exitsignal.exp. At least gdb.base/annota1.exp and gdb.base/annota3.exp have code in them to delete the core file. However, that isn't working for me, because said code only looks for cores named exactly either "core" or "core.PID", and my core_pattern doesn't match that. Another issue I noticed, is that I have not been running gdb.base/bigcore.exp, for a similar reason. I get: Program terminated with signal SIGABRT, Aborted. The program no longer exists. (gdb) PASS: gdb.base/bigcore.exp: signal SIGABRT UNTESTED: gdb.base/bigcore.exp: can't generate a core file But I actually have a core file under the testcase's output dir: $ find . -name "core.*" ./testsuite/outputs/gdb.base/bigcore/core.bigcore.2306705.nelson.1656005213 $ This commit fixes these things, by adding a find_core_file routine that searches core files in a way that works with my core pattern as well. This then also adds a convenience remove_core routine as a wrapper around find_core_file that removes the found core file. In addition, it changes some testcases that expect to have their program dump core, to switch the inferior's cwd to the testcase's output dir, so that the core is dumped there instead of in build/gdb/testsuite/. Some testcases were already doing that, but not all. The idea is that any core file dumped in build/gdb/testsuite/ is an unexpected core file. The next patch will add a count of such unexpected core files to gdb.sum. Another change is that the directory changing is now done with "set cwd" instead of with "cd". "set cwd" only affects the inferior cwd, while "cd" affects GDB's cwd too. By using "set cwd" instead of "cd", if GDB dumps core in these testcases, the GDB core dump will still end up in build/gdb/testsuite/, and can thus be detected as an unexpected core. Change-Id: I45068f21ffd4814350aaa8a3cc65cad5e3107607 2022-06-24 Andrew Burgess gdb: make use of RAII in run_inferior_call In passing I noticed that there are three local variables in run_inferior_call that are used to save, and then restore some state, I think these could all be replaced with a RAII style scoped_restore instead. Of the three locals that I've changed, the only one that I believe is now restored in a different location is ui::async, before this commit the async field was restored after a call to either delete_file_handle or ui_register_input_event_handler, and after this commit, the field is restored before these calls. However, I don't believe that either of these functions depend on the value of the async field, so I believe the commit is fine. Tested on x86-64/Linux passes with no regressions. 2022-06-24 Pedro Alves Delete delete_thread_silent delete_thread_silent is no longer used anywhere. Delete it. Change-Id: Iafcec12339861d5ab2e29c14d7b1f884c9e11c0f 2022-06-24 GDB Administrator Automatic date update in version.in 2022-06-23 Tom Tromey Don't declare cli_set_logging cli_set_logging is declared but not defined. It's probably a leftover from whenever interpreters were changed to use inheritance. This patch removes the declaration. Tested by grep and rebuilding. Use PyBool_FromLong I noticed a few spots that were explicitly creating new references to Py_True or Py_False. It's simpler here to use PyBool_FromLong, so this patch changes all the places I found. 2022-06-23 Alan Modra PowerPC64: fix assertion in ppc_build_one_stub with -Os code save_res stubs aren't written in ppc_build_one_stub, their offsets (which are zero) should not be checked. * elf64-ppc.c (ppc_build_one_stub): Don't check save_res offsets. 2022-06-23 Alan Modra Re: PowerPC64: stub debug dump Let's show the current stub as well as the previous one. Of interest is the current offset and a new field, id. Check that the build hash table traversal is in the same order as sizing traversal too. * elf64-ppc.c (struct ppc_stub_hash_entry): Add id. (struct ppc_link_hash_table): Add stub_id. (stub_hash_newfunc): Init id and symtype. (dump_stub): New function, extracted from.. (dump_previous_stub): ..here. Deleted. (ppc_build_one_stub): Sanity check stub id as well as offset. Show current stub as well as previous. (ppc_size_one_stub): Set stub id. (ppc64_elf_size_stubs): Init stub_id before traversal. (ppc64_elf_build_stubs): Likewise. 2022-06-23 Fangrui Song aarch64: Allow PC-relative relocations against protected STT_FUNC for -shared __attribute__((visibility("protected"))) void *foo() { return (void *)foo; } gcc -fpic -shared -fuse-ld=bfd fails with the confusing diagnostic: relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `foo' which may bind externally can not be used when making a shared object; recompile with -fPIC Call _bfd_elf_symbol_refs_local_p with local_protected==true to suppress the error. The new behavior matches gold and ld.lld. Note: if some code tries to use direct access relocations to take the address of foo (likely due to -fno-pic), the pointer equality will break, but the error should be reported on the executable link, not on the innocent shared object link. glibc 2.36 will give a warning at relocation resolving time. 2022-06-23 Fangrui Song aarch64: Define elf_backend_extern_protected_data to 0 [PR 18705] Follow-up to commit 90b7a5df152a64d2bea20beb438e8b81049a5c30 ("aarch64: Disallow copy relocations on protected data"). Commit 32f573bcb3aaa1c9defcad79dbb5851fcc02ae2d changed ld to produce R_AARCH64_GLOB_DAT but that defeated the purpose of protected visibility as an optimization. Restore the previous behavior (which matches ld.lld) by defining elf_backend_extern_protected_data to 0. 2022-06-23 GDB Administrator Automatic date update in version.in 2022-06-22 Tom Tromey Use std::string for interpreter_p The global interpreter_p is a manually-managed 'char *'. This patch changes it to be a std::string instead, and removes some erroneous comments. Move mi_interpreter to mi-interp.h I noticed that touching interps.h caused a lot of recompilation. I tracked this down to mi-common.h including this file. This patch moves the MI interpreter to mi-interp.h, which cuts down on recompilation when modifying interps.h. Use unique_xmalloc_ptr in interp This changes interp::m_name to be a unique_xmalloc_ptr, removing some manual memory management. It also cleans up the initialization of the 'inited' member, and moves the 'private:' and 'public:' keywords to their proper spots. 2022-06-22 Fangrui Song aarch64: Disallow copy relocations on protected data If an executable has copy relocations for extern protected data, that can only work if the shared object containing the definition is built with assumptions (a) the compiler emits GOT-generating relocations (b) the linker produces R_*_GLOB_DAT instead of R_*_RELATIVE. Otherwise the shared object uses its own definition directly and the executable accesses a stale copy. Note: the GOT relocations defeat the purpose of protected visibility as an optimization, and it turns out this never worked perfectly. glibc 2.36 will warn on copy relocations on protected data. Let's produce a warning at link time, matching ld.lld which has been used on many aarch64 OSes. Note: x86 requires GNU_PROPERTY_NO_COPY_ON_PROTECTED to have the error. This is to largely due to GCC 5's "x86-64: Optimize access to globals in PIE with copy reloc" which started to use direct access relocations for external data symbols in -fpie mode. GCC's aarch64 port does not have the change. Nowadays with most builds switching to -fpie/-fpic, aarch64 mostly doesn't need to worry about copy relocations. So for aarch64 we simply don't check GNU_PROPERTY_NO_COPY_ON_PROTECTED. 2022-06-22 Kumar N, Bhuvanendra Binutils support for split-dwarf and dwarf-5 * dwarf.c (fetch_indexed_string): Added new parameter str_offsets_base to calculate the string offset. (read_and_display_attr_value): Read DW_AT_str_offsets_base attribute. (process_debug_info): While allocating memory and initializing debug_information, do it for do_debug_info also, if its true. (load_separate_debug_files): Load .debug_str_offsets if exists. * dwarf.h (struct debug_info): Add str_offsets_base field. 2022-06-22 Nelson Chu RISC-V: Reorder the prefixed extensions which are out of order. This patch has been pending for almost a year... However, I noticed that llvm can already re-order the extensions, even if they are out of orders. Not really sure if they can also re-order the single letter extensions, but at least we can do this for the multi-letter extensions in binutils. bfd/ * elfxx-riscv.c (riscv_parse_prefixed_ext): Removed the code which are used to check the prefixed extension orders. gas/ * testsuite/gas/riscv/march-fail-order-x-z.d: Removed since we will help tp reorder the prefixed extensions for now. * testsuite/gas/riscv/march-fail-order-x-z.l: Likewise. * testsuite/gas/riscv/march-fail-order-x.d: Likewise. * testsuite/gas/riscv/march-fail-order-x.l: Likewise. * testsuite/gas/riscv/march-fail-order-z.d: Likewise. * testsuite/gas/riscv/march-fail-order-z.l: Likewise. 2022-06-22 Nelson Chu RISC-V: Use single h extension to control hypervisor CSRs and instructions. According to the picture 28.1 in the current ISA spec, h is no larger the multi-letter extension, it is a single extension after v. Therefore, this patch fix the implementation, and use the single h to control hypervisor CSRs and instructions, which we promised to do before. bfd/ * elfxx-riscv.c (riscv_supported_std_ext): Added h with version 1.0 after v. (riscv_supported_std_h_ext): Removed. (riscv_all_supported_ext): Updated since riscv_supported_std_h_ext is removed. (riscv_prefix_ext_class): Removed RV_ISA_CLASS_H. (parse_config): Updated since riscv_prefix_ext_class is removed. (riscv_recognized_prefixed_ext): Likewise. (riscv_get_default_ext_version): Likewise. (riscv_multi_subset_supports): Handle INSN_CLASS_H for hypervisor instructions. (riscv_multi_subset_supports_ext): Likewise. gas/ * config/tc-riscv.c (riscv_csr_class): Added CSR_CLASS_H and CSR_CLASS_H_32 for hypervisor CSRs. (riscv_csr_address): Likewise. * testsuite/gas/riscv/csr-version-1p10.d: Updated since hypervisor CSRs are controlled by single h extension for now. * testsuite/gas/riscv/csr-version-1p10.l: Likewise. * testsuite/gas/riscv/csr-version-1p11.d: Likewise. * testsuite/gas/riscv/csr-version-1p11.l: Likewise. * testsuite/gas/riscv/csr-version-1p12.d: Likewise. * testsuite/gas/riscv/csr-version-1p12.l: Likewise. * testsuite/gas/riscv/csr-version-1p9p1.d: Likewise. * testsuite/gas/riscv/csr-version-1p9p1.l: Likewise. * testsuite/gas/riscv/h-ext-32.d: Added h to architecture string. * testsuite/gas/riscv/h-ext-64.d: Likewise. * testsuite/gas/riscv/march-fail-single-prefix-h: Removed since h is no longer multi-letter extension. * testsuite/gas/riscv/march-fail-unknown-h.d: Likewise. include/ * opcode/riscv-opc.h: Control hypervisor CSRs by h extension, rather than the privileged spec verisons. * opcode/riscv.h (riscv_insn_class): Added INSN_CLASS_H. opcodes/ * riscv-opc.c (riscv_opcodes): Control hypervisor instructions by h extension. 2022-06-22 Tsukasa OI RISC-V: Add 'H' to canonical extension ordering This commit adds 'H' to canonical extension ordering based on current consensus (not officially ratified as a new ISA specification manual but discussion for software compatibility is made). bfd/ChangeLog * elfxx-riscv.c (riscv_ext_canonical_order): Add 'H' for canonical extension ordering based on current consensus. 2022-06-22 Tsukasa OI RISC-V: Prepare i18n for required ISA extensions Some strings returned by the riscv_multi_subset_supports_ext function contain not just extension names but words like "and" and "or". This commit wraps such strings with the gettext macro (_) for internationalization in the future. bfd/ChangeLog: * elfxx-riscv.c (riscv_multi_subset_supports_ext): Wrap some strings with the gettext macro to prepare future i18n. 2022-06-22 Tsukasa OI RISC-V: Fix inconsistent error message (range) This commit fixes inconsistent error message format involving compressed funct fields. In specific, funct6 had an error message with range 0..2^ ("0..64") unlike other funct fields with 0..2^-1 (e.g. funct4 with "0..15"). gas/ChangeLog: * config/tc-riscv.c (riscv_ip): Fix inconsistent error message. 2022-06-22 Marcus Nilsson readelf: replace xmalloc with malloc in slurp_relr_relocs Using xmalloc makes the null check redundant since failing allocation will exit the program. Instead use malloc and let the error be conveyed up the call chain. 2022-06-22 Alan Modra PowerPC64: stub debug dump powerpc64le-linux-ld is failing the assertion in ppc_build_one_stub, again apparently, which means a stub will overwrite the tail of a previous stub. The difficulty with debugging these issues is that it's not a problem with the stub that triggers the assertion, but the previous stub in that section. This patch keeps track of the last stub and adds a debug dump. Hopefully that will help. * elf64-ppc.c (enum _ppc64_sec_type): Add sec_stub. (struct _ppc64_elf_section_data): Add u.last_ent. (dump_previous_stub): New function. (ppc_build_one_stub): Keep track of previous stub, and dump it when finding an overlapping stub. 2022-06-22 Alan Modra PR29270, DW_FORM_udata signed output PR 29270 * dwarf.c (read_and_display_attr_value): Output DW_FORM_udata as unsigned. 2022-06-22 GDB Administrator Automatic date update in version.in 2022-06-21 Nick Alcock ld: regenerate configure after recent misgeneration Things work again after this. ld/ChangeLog: * configure: Regenerate. 2022-06-21 Nick Alcock libctf: tests: prune warnings from compiler output We were failing to call prune_warnings appropriately, leading to false-positive test failures on some platforms (observed on sparclinux). libctf/ChangeLog: * testsuite/lib/ctf-lib.exp: Prune warnings from compiler and linker output. * testsuite/libctf-regression/libctf-repeat-cu.exp: Likewise, and ar output too. 2022-06-21 Nick Alcock libctf: avoid mingw warning A missing paren led to an intended cast to avoid dependence on the size of size_t in one argument of ctf_err_warn applying to the wrong type by mistake. libctf/ChangeLog: * ctf-serialize.c (ctf_write_mem): Fix cast. 2022-06-21 Nick Alcock libctf: fix linking together multiple objects derived from the same source Right now, if you compile the same .c input repeatedly with CTF enabled and different compilation flags, then arrange to link all of these together, then things misbehave in various ways. libctf may conflate either inputs (if the .o files have the same name, say if they are stored in different .a archives), or per-CU outputs when conflicting types are found: the latter can lead to entirely spurious errors when it tries to produce multiple per-CU outputs with the same name (discarding all but the last, but then looking for types in the earlier ones which have just been thrown away). Fixing this is multi-pronged. Both inputs and outputs need to be differentiated in the hashtables libctf keeps them in: inputs with the same cuname and filename need to be considered distinct as long as they have different associated CTF dicts, and per-CU outputs need to be considered distinct as long as they have different associated input dicts. Right now there is nothing tying the two together other than the CU name: fix this by introducing a new field in the ctf_dict_t named ctf_link_in_out, which (for input dicts) points to the associated per-CU output dict (if any), and for output dicts points to the associated input dict. At creation time the name used is completely arbitrary: it's only important that it be distinct if CTF dicts are distinct. So, when a clash is found, adjust the CU name by sticking the number of elements in the input on the end. At output time, the CU name will appear in the linked object, so it matters a little more that it look slightly less ugly: in conflicting cases, append an incrementing integer, starting at 0. This naming scheme is not very helpful, but it's hard to see what else we can do. The input .o name may be the same. The input .a name is not even visible to ctf_link, and even *that* might be the same, because .a's can contain many members with the same name, all of which participate in the link. All we really know is that the two have distinct dictionaries with distinct types in them, and at least this way they are all represented, any any symbols, variables etc referring to those types are accurately stored. (As a side-effect this also fixes a use-after-free and double-free when errors are found during variable or symbol emission.) Use the opportunity to prevent a couple of sources of problems, to wit changing the active CU mappings when a link has already been done (no effect on ld, which doesn't use CU mappings at all), and causing multiple consecutive ctf_link's to have the same net effect as just doing the last one (no effect on ld, which only ever does one ctf_link) rather than having the links be a sort of half-incremental not-really-intended mess. libctf/ChangeLog: PR libctf/29242 * ctf-impl.h (struct ctf_dict) [ctf_link_in_out]: New. * ctf-dedup.c (ctf_dedup_emit_type): Set it. * ctf-link.c (ctf_link_add_ctf_internal): Set the input CU name uniquely when clashes are found. (ctf_link_add): Document what repeated additions do. (ctf_new_per_cu_name): New, come up with a consistent name for a new per-CU dict. (ctf_link_deduplicating): Use it. (ctf_create_per_cu): Use it, and ctf_link_in_out, and set ctf_link_in_out properly. Don't overwrite per-CU dicts with per-CU dicts relating to different inputs. (ctf_link_add_cu_mapping): Prevent per-CU mappings being set up if we already have per-CU outputs. (ctf_link_one_variable): Adjust ctf_link_per_cu call. (ctf_link_deduplicating_one_symtypetab): Likewise. (ctf_link_empty_outputs): New, delete all the ctf_link_outputs and blank out ctf_link_in_out on the corresponding inputs. (ctf_link): Clarify the effect of multiple ctf_link calls. Empty ctf_link_outputs if it already exists rather than having the old output leak into the new link. Fix a variable name. * testsuite/config/default.exp (AR): Add. (OBJDUMP): Likewise. * testsuite/libctf-regression/libctf-repeat-cu.exp: New test. * testsuite/libctf-regression/libctf-repeat-cu*: Main program, library, and expected results for the test. 2022-06-21 Kevin Buettner Document how GDB searches for files when using -s, -e, and -se options GDB's documentation of the 'file' command says: If you do not specify a directory and the file is not found in the GDB working directory, GDB uses the environment variable PATH as a list of directories to search, just as the shell does when looking for a program to run. The same is true for files specified via commandline options -s, -e, and -se. This commit adds a cross reference to the file command for these options. 2022-06-21 Nick Clifton Binutils support for dwarf-5 (location and range lists related) * dwarf.h (struct debug_info): Add rnglists_base field. * dwarf.c (read_and_display_attr_value): Read attribute DW_AT_rnglists_base. (display_debug_rnglists_list): While handling DW_RLE_base_addressx, DW_RLE_startx_endx, DW_RLE_startx_length items, pass the proper parameter value to fetch_indexed_addr(), i.e. fetch the proper entry in .debug_addr section. (display_debug_ranges): Add rnglists_base to the .debug_rnglists base address. (load_separate_debug_files): Load .debug_addr section, if exists. Default to disabling the linker warnings about execstack and RWX segments if the target is the HPPA architecture. PR 29263 * configure.ac (ac_default_ld_warn_execstack): Default to 'no' for HPPA targets. (ac_default_ld_warn_rwx_segments): Likewise. * configure: Regenerate. * testsuite/ld-elf/elf.exp: Add the --warn-execstack command line option to the command line when running execstack tests for the HPPA target. 2022-06-21 GDB Administrator Automatic date update in version.in 2022-06-20 Tom Tromey Move finish_print out of value_print_options 'finish_print' does not really belong in value_print_options -- this is consulted only when deciding whether or not to print a value, and never during the course of printing. This patch removes it from the structure and makes it a static global in infcmd.c instead. Tested on x86-64 Fedora 34. 2022-06-20 Alan Modra PR29262, memory leak in pr_function_type PR 29262 * prdbg.c (pr_function_type): Free "s" on failure path. PR29261, memory leak in parse_stab_struct_fields PR 29261 * stabs.c (parse_stab_struct_fields): Free "fields" on failure path. 2022-06-20 GDB Administrator Automatic date update in version.in 2022-06-19 GDB Administrator Automatic date update in version.in 2022-06-18 Tom Tromey Fix assertion failure in copy_type PR exp/20630 points out a simple way to cause an assertion failure in copy_type -- but this was found in the wild a few times as well. copy_type only works for objfile-owned types, but there isn't a deep reason for this. This patch fixes the bug by updating copy_type to work for any sort of type. Better would perhaps be to finally implement type GC, but I still haven't attempted this. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=20630 2022-06-18 Tomoaki Kawada Fix the sorting algorithm for reloc entries The optimized insertion sort algorithm in `elf_link_adjust_relocs` incorrectly assembled "runs" from unsorted entries and inserted them to an already-sorted prefix, breaking the loop invariants of insertion sort. This commit updates the run assembly loop to break upon encountering a non-monotonic change in the sort key. PR 29259 bfd/ * elflink.c (elf_link_adjust_relocs): Ensure run being inserted is sorted. ld/ * testsuite/ld-elf/pr29259.d, * testsuite/ld-elf/pr29259.s, * testsuite/ld-elf/pr29259.t: New test. 2022-06-18 Enze Li gdb/python: Export nibbles to python layer This patch makes it possible to allow Value.format_string() to return nibbles output. When we set the parameter of nibbles to True, we can achieve the displaying binary values in groups of every four bits. Here's an example: (gdb) py print (gdb.Value (1230).format_string (format='t', nibbles=True)) 0100 1100 1110 (gdb) Note that the parameter nibbles is only useful if format='t' is also used. This patch also includes update to the relevant testcase and documentation. Tested on x86_64 openSUSE Tumbleweed. 2022-06-18 Enze Li gdb/doc: Documentation for the new print command Document the new command "print nibbles" and add a NEWS entry. 2022-06-18 Enze Li gdb: Add new 'print nibbles' feature Make an introduction of a new print setting that can be set by 'set print nibbles [on|off]'. The default value if OFF, which can be changed by user manually. Of course, 'show print nibbles' is also included in the patch. The new feature displays binary values by group, with four bits per group. The motivation for this work is to enhance the readability of binary values. Here's a GDB session before this patch is applied. (gdb) print var_a $1 = 1230 (gdb) print/t var_a $2 = 10011001110 With this patch applied, we can use the new print setting to display the new form of the binary values. (gdb) print var_a $1 = 1230 (gdb) print/t var_a $2 = 10011001110 (gdb) set print nibbles on (gdb) print/t var_a $3 = 0100 1100 1110 Tested on x86_64 openSUSE Tumbleweed. 2022-06-18 GDB Administrator Automatic date update in version.in 2022-06-17 Tiezhu Yang gdb: NEWS: Move LoongArch gdbserver to the correct section commit e5ab6af52d38 ("gdbserver: Add LoongArch/Linux support") was merged into the master since GDB 12, so we should put the news in the "Changes since GDB 12" section. Thanks Tom Tromey for your correction [1], sorry for that. [1] https://sourceware.org/pipermail/gdb-patches/2022-June/190122.html 2022-06-17 Alan Modra PR29256, memory leak in obj_elf_section_name When handling section names in quotes obj_elf_section_name calls demand_copy_C_string, which puts the name on the gas notes obstack. Such strings aren't usually freed, since obstack_free frees all more recently allocated objects as well as its arg. When handling non-quoted names, obj_elf_section_name mallocs the name. Due to the mix of allocation strategies it isn't possible for callers to free names, if that was desirable. Partially fix this by always creating names on the obstack, which is more efficient anyway. (You still can't obstack_free on error paths due to the xtensa tc_canonicalize_section_name.) Also remove a couple of cases where the name is dup'd for no good reason as far as I know. PR 29256 * config/obj-elf.c (obj_elf_section_name): Create name on notes obstack. (obj_elf_attach_to_group): Don't strdup group name. (obj_elf_section): Likewise. (obj_elf_vendor_attribute): Use xmemdup0 rather than xstrndup. 2022-06-17 Alan Modra PR29255, memory leak in make_tempdir PR 29255 * bucomm.c (make_tempdir, make_tempname): Free template on all failure paths. PR29254, memory leak in stab_demangle_v3_arg PR 29254 * stabs.c (stab_demangle_v3_arg): Free dt on failure path. 2022-06-17 Pedro Alves Fix GDB build with GCC 4.8 & 4.9 With gcc 4.8/4.9, we run into this build failure (and other similar ones): /home/palves/gdb/binutils-gdb/src/gdb/location.h:224:59: error: could not convert ‘{0, LINE_OFFSET_UNKNOWN}’ from ‘’ to ‘line_offset’ struct line_offset line_offset = {0, LINE_OFFSET_UNKNOWN}; ^ The issue is that at around the GCC 4.8/4.9 era, a default member initializer prevented the struct from being an aggregate, so you cannot use aggregate initialization on them. That rule changed after GCC 4.9 and GCC 5 & later uses new rules. Fix this by not using aggregate initialization for struct line_offset. The default member initization already leaves line_offset as {0, LINE_OFFSET_UNKNOWN}, so initialization to those values can just go away. The remaining cases are of the form {0, LINE_OFFSET_NONE}, and those cases can be better rewritten to delay setting the sign field until we know we have a valid offset. Change-Id: I0506ea4a83c5fa2f15e159569db68b3b0a7509b4 2022-06-17 Pedro Alves Convert set_location_spec_string to a method This converts set_location_spec_string to a method of location_spec, and makes the location_spec::as_string field protected, renaming it to m_as_string along the way. Change-Id: Iccfb1654e9fa7808d0512df89e775f9eacaeb9e0 2022-06-17 Pedro Alves Convert location_spec_to_string to a method This converts location_spec_to_string to a method of location_spec, simplifying the code using it, as it no longer has to use std::unique_ptr::get(). Change-Id: I621bdad8ea084470a2724163f614578caf8f2dd5 2022-06-17 Pedro Alves Convert location_spec_type to a method This converts location_spec_type to location_spec::type(). Change-Id: Iff4cbfafb1cf3d22adfa142ff939b4a148e52273 2022-06-17 Pedro Alves Convert location_spec_empty_p to a method This converts location_spec_empty_p to a method of location_spec, simplifying users, as they no longer have to use std::unique_ptr::get(). Change-Id: I83381a729896f12e1c5a1b4d6d4c2eb1eb6582ff 2022-06-17 Pedro Alves Eliminate copy_location_spec copy_location_spec is just a wrapper around location_spec::clone(), so remove it and call clone() directly. This simplifies users, as they no longer have to use std::unique_ptr::get(). Change-Id: I8ce8658589460b98888283b306b315a5b8f73976 2022-06-17 Pedro Alves Eliminate the two-level data structures behind location_specs Currently, there's the location_spec hierarchy, and then some location_spec subclasses have their own struct type holding all their data fields. I.e., there is this: location_spec explicit_location_spec linespec_location_spec address_location_spec probe_location_spec and then these separate types: explicit_location linespec_location where: explicit_location_spec has-a explicit_location linespec_location_spec has-a linespec_location This patch eliminates explicit_location and linespec_location, inlining their members in the corresponding location_spec type. The location_spec subclasses were the ones currently defined in location.c, so they are moved to the header. Since the definitions of the classes are now visible, we no longer need location_spec_deleter. Some constructors that are used for cloning location_specs, like: explicit explicit_location_spec (const struct explicit_location *loc) ... were converted to proper copy ctors. In the process, initialize_explicit_location is eliminated, and some functions that returned the "data type behind a locspec", like get_linespec_location are converted to downcast functions, like as_linespec_location_spec. Change-Id: Ia31ccef9382b25a52b00fa878c8df9b8cf2a6c5a 2022-06-17 Pedro Alves event_location -> location_spec Currently, GDB internally uses the term "location" for both the location specification the user input (linespec, explicit location, or an address location), and for actual resolved locations, like the breakpoint locations, or the result of decoding a location spec to SaLs. This is expecially confusing in the breakpoints module, as struct breakpoint has these two fields: breakpoint::location; breakpoint::loc; "location" is the location spec, and "loc" is the resolved locations. And then, we have a method called "locations()", which returns the resolved locations as range... The location spec type is presently called event_location: /* Location we used to set the breakpoint. */ event_location_up location; and it is described like this: /* The base class for all an event locations used to set a stop event in the inferior. */ struct event_location { and even that is incorrect... Location specs are used for finding actual locations in the program in scenarios that have nothing to do with stop events. E.g., "list" works with location specs. To clean all this confusion up, this patch renames "event_location" to "location_spec" throughout, and then all the variables that hold a location spec, they are renamed to include "spec" in their name, like e.g., "location" -> "locspec". Similarly, functions that work with location specs, and currently have just "location" in their name are renamed to include "spec" in their name too. Change-Id: I5814124798aa2b2003e79496e78f95c74e5eddca 2022-06-17 Vladimir Mezentsev gprofng: fix build with -Werror=format-truncation gprofng/ChangeLog 2022-06-16 Vladimir Mezentsev * configure.ac: Remove -Wno-format-truncation. * src/Makefile.am: Likewise. * configure: Rebuild. * src/Makefile.in: Rebuild. * common/hwctable.c: Fix -Werror=format-truncation errors. * src/ipc.cc: Likewise. * src/parse.cc: Likewise. 2022-06-17 GDB Administrator Automatic date update in version.in 2022-06-16 Tom de Vries [gdb/testsuite] Fix have_mpx test When testing on openSUSE Leap 15.4 I ran into this FAIL: ... FAIL: gdb.arch/i386-mpx-map.exp: NULL address of the pointer ... and likewise for all the other mpx tests. The problem is that have_mpx is supposed to return 0, but it doesn't because it tries to match this output: ... builtin_spawn -ignore SIGHUP temp/20294/have_mpx-2-20294.x^M No MPX support^M No MPX support^M ... using: ... && ![string equal $output "No MPX support\r\n"]] ... Fix this by matching using a regexp instead. Tested on x86_64-linux. 2022-06-16 Alan Modra use of uninitialised value in input_file_open Triggered by a file containing just "#N" or "#A". fgets when hitting EOF before reading anything returns NULL and does not write to buf. strchr (buf, '\n') then is reading from uninitialised memory. * input-file.c (input_file_open): Don't assume buf contains zero string terminator when fgets returns NULL. 2022-06-16 Alan Modra Always free matching vector from bfd_check_format_matches At least one place calling list_matching_formats failed to free the "matching" vector from bfd_check_format_matches afterwards. Fix that by calling free inside list_matching_formats. binutils/ * bucomm.c (list_matching_formats): Free arg. * addr2line.c (process_file): Adjust to suit. * ar.c (open_inarch, ranlib_touch): Likewise. * coffdump.c (main): Likewise. * nm.c (display_archive, display_file): Likewise. * objcopy.c (copy_file): Likewise. * objdump.c (display_object_bfd): Likewise. * size.c (display_bfd): Likewise. * srconv.c (main): Likewise. ld/ * ldlang.c (load_symbols): Free "matching". 2022-06-16 Alan Modra Revert "Revert "Fix fbsd core matching"" This reverts commit 476288fa2bddecf0f0e13dee826a076309bf01fe. 2022-06-16 Alan Modra Restore readelf -wF Commit 94585d6d4495 resulted in readelf -wF failing with Unrecognized debug letter option 'F' binutils/ * dwarf.c (debug_dump_long_opts): Add letter. (debug_option_table): New, replacing.. (opts_table, letter_table): ..these. (dwarf_select_sections_by_names): Adjust to suit. Set do_debug_frames outside of loop. (dwarf_select_sections_by_letters): Similarly. gas/ * testsuite/gas/i386/ehinterp.d: Use readelf -wF. 2022-06-16 Alan Modra PR29250, readelf erases CIE initial register state PR 29250 binutils/ * dwarf.c (display_debug_frames): Set col_type[reg] on sizing pass over FDE to cie->col_type[reg] if CIE specifies reg. Handle DW_CFA_restore and DW_CFA_restore_extended on second pass using the same logic. Remove unnecessary casts. Don't call frame_need_space on second pass over FDE. gas/ * testsuite/gas/i386/ehinterp.d, * testsuite/gas/i386/ehinterp.s: New test. * testsuite/gas/i386/i386.exp: Run it. 2022-06-16 GDB Administrator Automatic date update in version.in 2022-06-15 Sergei Trofimovich sim: fix BFD_VMA format arguments on 32-bit hosts [PR gdb/29184] Noticed format mismatch when attempted to build gdb on i686-linux-gnu in --enable-64-bit-bfd mode: sim/../../sim/cris/sim-if.c:576:28: error: format '%lx' expects argument of type 'long unsigned int', but argument 4 has type 'bfd_size_type' {aka 'long long unsigned int'} [-Werror=format=] 576 | sim_do_commandf (sd, "memory region 0x%" BFD_VMA_FMT "x,0x%lx", | ^~~~~~~~~~~~~~~~~~~ 577 | interp_load_addr, interpsiz); | ~~~~~~~~~ | | | bfd_size_type {aka long long unsigned int} While at it fixed format string for time-related types. 2022-06-15 Tom Tromey Check for listeners in emit_exiting_event I noticed that emit_exiting_event does not check whether there are any listeners before creating the event object. All other event emitters do this, so this patch updates this one as well. 2022-06-15 Tom Tromey Add to documentation of Python 'dont_repeat' method PR python/28533 points out that the Python 'dont_repeat' documentation is a bit ambiguous about when the method ought to be called. This patch spells it out. 2022-06-15 Yvan Roux gdb/arm: Make sp alias for one of the other stack pointers For Cortex-M targets, SP register is never detached from msp or psp, it always has the same value as one of them. Let GDB treat ARM_SP_REGNUM as an alias similar to what is done in hardware. 2022-06-15 Yvan Roux gdb/arm: Track msp and psp For Arm Cortex-M33 with security extensions, there are 4 different stack pointers (msp_s, msp_ns, psp_s, psp_ns). To be compatible with earlier Cortex-M derivates, the msp and psp registers are aliases for one of the 4 real stack pointer registers. These are the combinations that exist: sp -> msp -> msp_s sp -> msp -> msp_ns sp -> psp -> psp_s sp -> psp -> psp_ns This means that when the GDB client is to show the value of "msp", the value should always be equal to either "msp_s" or "msp_ns". Same goes for "psp". To add a bit more context; GDB does not really use the register msp (or psp) internally, but they are part of the set of registers which are provided by the target.xml file. As a result, they will be part of the set of registers printed by the "info r" command. Without this particular patch, GDB will hit the assert in the bottom of arm_cache_get_sp_register function. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29121 2022-06-15 Yvan Roux gdb/arm: Fetch initial sp value prior to compare For Arm Cortex-M33 with security extensions, there are 4 different stack pointers (msp_s, msp_ns, psp_s, psp_ns). In order to identify the active one, compare the values of the different stacks. The value of the initial sp register needs to be fetched to perform this comparison. 2022-06-15 Andrew Burgess gdb: unify two dis_asm_read_memory functions in disasm.c After the recent restructuring of the disassembler code, GDB has ended up with two identical class static functions, both called dis_asm_read_memory, with identical implementations. My first thought was to move these out of their respective classes, and just make them global functions, then I'd only need a single copy. And maybe that's the right way to go. But I disliked that by doing that I loose the encapsulation of the method with the corresponding disassembler class. So, instead, I placed the static method into its own class, and had both the gdb_non_printing_memory_disassembler and gdb_disassembler classes inherit from this new class as an additional base-class. In terms of code generated, I don't think there's any significant difference with this approach, but I think this better reflects how the function is closely tied to the disassembler. There should be no user visible changes after this commit. 2022-06-15 Andrew Burgess gdb: refactor the non-printing disassemblers This commit started from an observation I made while working on some other disassembler patches, that is, that the function gdb_buffered_insn_length, is broken ... sort of. I noticed that the gdb_buffered_insn_length function doesn't set up the application data field if the disassemble_info structure. Further, I noticed that some architectures, for example, ARM, require that the application_data field be set, see gdb_print_insn_arm in arm-tdep.c. And so, if we ever use gdb_buffered_insn_length for ARM, then GDB will likely crash. Which is why I said only "sort of" broken. Right now we don't use gdb_buffered_insn_length with ARM, so maybe it isn't broken yet? Anyway to prove to myself that there was a problem here I extended the disassembler self tests in disasm-selftests.c to include a test of gdb_buffered_insn_length. As I run the test for all architectures, I do indeed see GDB crash for ARM. To fix this we need gdb_buffered_insn_length to create a disassembler that inherits from gdb_disassemble_info, but we also need this new disassembler to not print anything. And so, I introduce a new gdb_non_printing_disassembler class, this is a disassembler that doesn't print anything to the output stream. I then observed that both ARC and S12Z also create non-printing disassemblers, but these are slightly different. While the disassembler in gdb_non_printing_disassembler reads the instruction from a buffer, the ARC and S12Z disassemblers read from target memory using target_read_code. And so, I further split gdb_non_printing_disassembler into two sub-classes, gdb_non_printing_memory_disassembler and gdb_non_printing_buffer_disassembler. The new selftests now pass, but otherwise, there should be no user visible changes after this commit. 2022-06-15 Andrew Burgess gdb/python: implement the print_insn extension language hook This commit extends the Python API to include disassembler support. The motivation for this commit was to provide an API by which the user could write Python scripts that would augment the output of the disassembler. To achieve this I have followed the model of the existing libopcodes disassembler, that is, instructions are disassembled one by one. This does restrict the type of things that it is possible to do from a Python script, i.e. all additional output has to fit on a single line, but this was all I needed, and creating something more complex would, I think, require greater changes to how GDB's internal disassembler operates. The disassembler API is contained in the new gdb.disassembler module, which defines the following classes: DisassembleInfo Similar to libopcodes disassemble_info structure, has read-only properties: address, architecture, and progspace. And has methods: __init__, read_memory, and is_valid. Each time GDB wants an instruction disassembled, an instance of this class is passed to a user written disassembler function, by reading the properties, and calling the methods (and other support methods in the gdb.disassembler module) the user can perform and return the disassembly. Disassembler This is a base-class which user written disassemblers should inherit from. This base class provides base implementations of __init__ and __call__ which the user written disassembler should override. DisassemblerResult This class can be used to hold the result of a call to the disassembler, it's really just a wrapper around a string (the text of the disassembled instruction) and a length (in bytes). The user can return an instance of this class from Disassembler.__call__ to represent the newly disassembled instruction. The gdb.disassembler module also provides the following functions: register_disassembler This function registers an instance of a Disassembler sub-class as a disassembler, either for one specific architecture, or, as a global disassembler for all architectures. builtin_disassemble This provides access to GDB's builtin disassembler. A common use case that I see is augmenting the existing disassembler output. The user code can call this function to have GDB disassemble the instruction in the normal way. The user gets back a DisassemblerResult object, which they can then read in order to augment the disassembler output in any way they wish. This function also provides a mechanism to intercept the disassemblers reads of memory, thus the user can adjust what GDB sees when it is disassembling. The included documentation provides a more detailed description of the API. There is also a new CLI command added: maint info python-disassemblers This command is defined in the Python gdb.disassemblers module, and can be used to list the currently registered Python disassemblers. 2022-06-15 Andrew Burgess gdb: add extension language print_insn hook This commit is setup for the next commit. In the next commit I will add a Python API to intercept the print_insn calls within GDB, each print_insn call is responsible for disassembling, and printing one instruction. After the next commit it will be possible for a user to write Python code that either wraps around the existing disassembler, or even, in extreme situations, entirely replaces the existing disassembler. This commit does not add any new Python API. What this commit does is put the extension language framework in place for a print_insn hook. There's a new callback added to 'struct extension_language_ops', which is then filled in with nullptr for Python and Guile. Finally, in the disassembler, the code is restructured so that the new extension language function ext_lang_print_insn is called before we delegate to gdbarch_print_insn. After this, the next commit can focus entirely on providing a Python implementation of the new print_insn callback. There should be no user visible change after this commit. 2022-06-15 Andrew Burgess gdb: add new base class to gdb_disassembler The motivation for this change is an upcoming Python disassembler API that I would like to add. As part of that change I need to create a new disassembler like class that contains a disassemble_info and a gdbarch. The management of these two objects is identical to how we manage these objects within gdb_disassembler, so it might be tempting for my new class to inherit from gdb_disassembler. The problem however, is that gdb_disassembler has a tight connection between its constructor, and its print_insn method. In the constructor the ui_file* that is passed in is replaced with a member variable string_file*, and then in print_insn, the contents of the member variable string_file are printed to the original ui_file*. What this means is that the gdb_disassembler class has a tight coupling between its constructor and print_insn; the class just isn't intended to be used in a situation where print_insn is not going to be called, which is how my (upcoming) sub-class would need to operate. My solution then, is to separate out the management of the disassemble_info and gdbarch into a new gdb_disassemble_info class, and make this class a parent of gdb_disassembler. In arm-tdep.c and mips-tdep.c, where we used to cast the disassemble_info->application_data to a gdb_disassembler, we can now cast to a gdb_disassemble_info as we only need to access the gdbarch information. Now, my new Python disassembler sub-class will still want to print things to an output stream, and so we will want access to the dis_asm_fprintf functionality for printing. However, rather than move this printing code into the gdb_disassemble_info base class, I have added yet another level of hierarchy, a gdb_printing_disassembler, thus the class structure is now: struct gdb_disassemble_info {}; struct gdb_printing_disassembler : public gdb_disassemble_info {}; struct gdb_disassembler : public gdb_printing_disassembler {}; In a later commit my new Python disassembler will inherit from gdb_printing_disassembler. The reason for adding the additional layer to the class hierarchy is that in yet another commit I intend to rewrite the function gdb_buffered_insn_length, and to do this I will be creating yet more disassembler like classes, however, these will not print anything, thus I will add a gdb_non_printing_disassembler class that also inherits from gdb_disassemble_info. Knowing that that change is coming, I've gone with the above class hierarchy now. There should be no user visible changes after this commit. 2022-06-15 Andrew Burgess gdb/python: convert gdbpy_err_fetch to use gdbpy_ref Convert the gdbpy_err_fetch class to make use of gdbpy_ref, this removes the need for manual reference count management, and allows the destructor to be removed. There should be no functional change after this commit. I think this cleanup is worth doing on its own, however, in a later commit I will want to copy instances of gdbpy_err_fetch, and switching to using gdbpy_ref means that I can rely on the default copy constructor, without having to add one that handles the reference counts, so this is good preparation for that upcoming change. 2022-06-15 Jan Beulich x86: drop print_operand_value()'s "hex" parameter For quite some time all callers have been passing 1 / true. While there fold the final oappend_with_style() calls. 2022-06-15 Tom de Vries [gdb/build] Fix build for gcc < 11 When building trunk on openSUSE Leap 15.3 with system gcc 7.5.0, I run into: ... In file included from ../bfd/bfd.h:46:0, from gdb/defs.h:37, from gdb/debuginfod-support.c:19: gdb/debuginfod-support.c: In function ‘bool debuginfod_is_enabled()’: gdb/../include/diagnostics.h:42:3: error: unknown option after \ ‘#pragma GCC diagnostic’ kind [-Werror=pragmas] _Pragma (DIAGNOSTIC_STRINGIFY (GCC diagnostic ignored option)) ^ gdb/../include/diagnostics.h:80:3: note: in expansion of macro \ ‘DIAGNOSTIC_IGNORE’ DIAGNOSTIC_IGNORE ("-Wstringop-overread") ^~~~~~~~~~~~~~~~~ gdb/debuginfod-support.c:201:4: note: in expansion of macro \ ‘DIAGNOSTIC_IGNORE_STRINGOP_OVERREAD’ DIAGNOSTIC_IGNORE_STRINGOP_OVERREAD ^ ... The problem is that the warning -Wstringop-overread has been introduced for gcc 11, and we can only tell gcc to ignore if it knows about it. Fix this by guarding the DIAGNOSTIC_IGNORE_STRINGOP_OVERREAD definition in diagnostics.c with '#if __GNUC__ >= 11'. Tested on x86_64-linux, by completing a build. 2022-06-15 Alan Modra PR29230, segv in lookup_symbol_in_variable_table The PR23230 testcase uses indexed strings without specifying SW_AT_str_offsets_base. In this case we left u.str with garbage (from u.val) which then led to a segfault when attempting to access the string. Fix that by clearing u.str. The patch also adds missing sanity checks in the recently committed read_indexed_address and read_indexed_string functions. PR 29230 * dwarf2.c (read_indexed_address): Return uint64_t. Sanity check idx. (read_indexed_string): Use uint64_t for str_offset. Sanity check idx. (read_attribute_value): Clear u.str for indexed string forms when DW_AT_str_offsets_base is not yet read or missing. 2022-06-15 Mark Wielaard gdb: Always suppress stringop-overread warning in debuginfod-support.c Just like on s390x with g++ 11.2.1 and ppc64le with g++ 11.3.1 g++ 11 on hppa produces a spurious warning for stringop-overread in debuginfod_is_enabled for url_view. Just always suppress it on all arches. https://sourceware.org/bugzilla/show_bug.cgi?id=29198 gdb/ChangeLog: * debuginfod-support.c (debuginfod_is_enabled): Always use DIAGNOSTIC_IGNORE_STRINGOP_OVERREAD. 2022-06-15 GDB Administrator Automatic date update in version.in 2022-06-14 Vladimir Mezentsev gprofng docs: provide help for == The help message from 'gprofng collect app -h', in the section on == , had a dangling reference to a non-existent manpage. Provide basic info, including reasons for caution. gprofng docs: mention HTML / PDF in the gprofng README The HTML and PDF formats are described in the gprofng tutorial (info topic "Other Document Formats"). In addition, describe them in the README because: they are important; they are easily searchable; and the README is primarily oriented to the person who is installing gprofng, who may differ from the person who follows a user tutorial. 2022-06-14 Vladimir Mezentsev gprofng: fix build with -Werror=format-security gprofng/ChangeLog 2022-06-13 Vladimir Mezentsev PR gprofng/28968 * src/src/Hist_data.cc (print_row): Make param const. * src/src/Hist_data.h (print_row): Likewise. * src/src/Print.h: Remove unused functions and variables. * src/Print.cc: Fix -Werror=format-security errors. * src/parse.cc: Likewise. 2022-06-14 Tom de Vries [gdb/testsuite] Handle unordered dict in gdb.python/py-mi-cmd.exp When running test-case gdb.python/py-mi-cmd.exp on openSUSE Leap 42.3 with python 3.4, I occasionally run into: ... Expecting: ^(-pycmd dct[^M ]+)?(\^done,result={hello="world",times="42"}[^M ]+[(]gdb[)] ^M [ ]*) -pycmd dct^M ^done,result={times="42",hello="world"}^M (gdb) ^M FAIL: gdb.python/py-mi-cmd.exp: -pycmd dct (unexpected output) ... The problem is that the data type used here in py-mi-cmd.py: ... elif argv[0] == "dct": return {"result": {"hello": "world", "times": 42}} ... is a dictionary, and only starting version 3.6 are dictionaries insertion ordered, so using PyDict_Next in serialize_mi_result doesn't guarantee a fixed order. Fix this by allowing the alternative order. Tested on x86_64-linux. 2022-06-14 Tom Tromey Implement lazy FPU initialization for ravenscar Some ravenscar runtimes implement lazy FPU handling. On these runtimes, the FPU is only initialized when a task tries to use it. Furthermore, the FP registers aren't automatically saved on a task switch -- instead, the save is deferred until the new task tries to use the FPU. Furthermore, each task's context area has a flag indicating whether the FPU has been initialized for this task. This patch teaches GDB to understand this implementation. When fetching or storing registers, GDB now checks to see whether the live FP registers should be used. If not, the task's saved FP registers will be used if the task has caused FPU initialization. Currently only AArch64 uses this code. bb-runtimes implements this for ARM as well, but GDB doesn't yet have an arm-ravenscar-thread.c. 2022-06-14 Tom Tromey Reimplement ravenscar registers using tables Currently, the ravenscar-thread implementation for each architecture is written by hand. However, these are actually written by copy-paste. It seems better to switch to a table-driven approach. The previous code also fetched all registers whenever any register was requested. This is corrected in the new implementation. 2022-06-14 Tom Tromey Fix bugs in aarch64-ravenscar-thread.c We found a few bugs in aarch64-ravenscar-thread.c. First, some of the register offsets were incorrect. The "bb-runtimes" file for this runtime had the wrong offsets in comments, which GDB took to be correct. However, those comments didn't account for alignment. This patch adjusts the offsets. Next, the "FPU Saved field" is not a register -- it is an implementation detail of the runtime. This is removed. Finally, I think the FP registers are actually named V0-V31, and the "Q" names are pseudo-registers. This patch fixes the comment. 2022-06-14 Tom Tromey Allow 'interrupt -a' in all-stop mode PR gdb/17160 points out that "interrupt -a" errors in all-stop mode, but there's no good reason for this. This patch removes the error. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17160 2022-06-14 Youling Tang gdbserver: Add LoongArch/Linux support Implement LoongArch/Linux support, including XML target description handling based on features determined, GPR regset support, and software breakpoint handling. In the Linux kernel code of LoongArch, ptrace implements PTRACE_POKEUSR and PTRACE_PEEKUSR in the arch_ptrace function, so srv_linux_usrregs is set to yes. With this patch on LoongArch: $ make check-gdb TESTS="gdb.server/server-connect.exp" [...] # of expected passes 18 [...] 2022-06-14 Tom de Vries Revert "Fix fbsd core matching" This reverts commit a7e29f797cecd5a2f73c27838b09eae1f1b6c657. I accidentally pushed this, so revert. 2022-06-14 Tom de Vries [gdb/testsuite] Fix regexp in gdb.ada/mi_var_access.exp With gcc-12 and target board unix/-m32, we run into: ... (gdb) ^M Expecting: ^(-var-create A_String_Access \* A_String_Access[^M ]+)?(\^done,name="A_String_Access",numchild="1",.*[^M ]+[(]gdb[)] ^M [ ]*) -var-create A_String_Access * A_String_Access^M ^error,msg="Value out of range."^M (gdb) ^M FAIL: gdb.ada/mi_var_access.exp: Create varobj (unexpected output) ... What happens is easier to understand if we take things out of the mi context: ... $ gdb -q -batch \ outputs/gdb.ada/mi_var_access/mi_access \ -ex "b mi_access.adb:19" \ -ex run \ -ex "p A_String_Access" ... Breakpoint 1, mi_access () at mi_access.adb:19 19 A_String : String (3 .. 5) := "345"; -- STOP $1 = (pck.string_access) ... while with target board unix we have instead: ... $1 = (pck.string_access) 0x431b40 ... The var-create command samples the value of the variable at a location where the variable is not yet initialized, and with target board unix we accidentally hit a valid address, but with target board unix/-m32 that's not the case. Fix the FAIL by accepting the error message. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28464 2022-06-14 Alan Modra Fix fbsd core matching On Thu, Jun 09, 2022 at 08:59:37AM -0700, John Baldwin wrote: > On 6/9/22 1:58 AM, Tom de Vries via Gdb-patches wrote: > > Hi, > > > > With an --enable-targets=all build and target board unix/-m32 I run into a > > FAIL in test-case gdb.base/corefile.exp: > > ... > > (gdb) file outputs/gdb.base/corefile/corefile^M > > Reading symbols from outputs/gdb.base/corefile/corefile...^M > > (gdb) core-file outputs/gdb.base/corefile/corefile.core^M > > warning: core file may not match specified executable file.^M > > [New LWP 12011]^M > > Core was generated by `outputs/gdb.base/corefile/co'.^M > > Program terminated with signal SIGABRT, Aborted.^M > > (gdb) FAIL: gdb.base/corefile.exp: core-file warning-free > > ... > > > > The warning is there because of this mismatch between core and exec: > > ... > > (gdb) p core_bfd->xvec > > $3 = (const struct bfd_target *) 0x20112a0 > > (gdb) p exec_bfd->xvec > > $4 = (const struct bfd_target *) 0x2010b00 > > ... > > > > In the exec case, the detected architecture is i386_elf32_vec because this bit > > of code in elfcode.h:elf_object_p(): > > ... > > if (ebd->elf_machine_code != EM_NONE > > && i_ehdrp->e_ident[EI_OSABI] != ebd->elf_osabi > > && ebd->elf_osabi != ELFOSABI_NONE) > > goto got_wrong_format_error; > > ... > > prevents i386_elf32_fbsd from matching. > > > > Fix the core matching by copying that code to elfcore.h:elf_core_file_p(). > > > > Tested on x86_64-linux. > > > > Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29227 > > > > Any comments? Looks good. > Looking at elfcore.h, it seems to have not gotten changes made to elfcode.h over > time and is a bit rotted. I suspect that all of changes made in commit 0aabe54e6222 > that added these lines in elfcode.h (along with several other changes) need to > be applied to this function in elfcore.h, not just adding these lines. Yes, the commit 0aabe54e6222 changes likely should go in too. I'm a little wary of adding all the sanity checks to elf_core_file_p since that might result in some core files not being recognised at all. For example, despite the FIXME I'd guess leaving out the EI_VERSION check was deliberate. The following seems reasonable to me. Please test. 2022-06-14 Kavitha Natarajan Debug support for global alias variable Starting with (future) Clang 15 (since https://reviews.llvm.org/D120989), Clang emits the DWARF information of global alias variables as DW_TAG_imported_declaration. However, GDB does not handle it. It incorrectly always reads this tag as C++/Fortran imported declaration (type alias, namespace alias and Fortran module). This commit adds support to handle this tag as an alias variable. This change fixes the failures in the gdb.base/symbol-alias.exp testcase with current git Clang. This testcase is also updated to test nested (recursive) aliases. 2022-06-14 Alan Modra BFD_RELOC_MIPS_16 MIPS should not be using BFD_RELOC_16 for its R_MIPS_16 relocation, since R_MIPS_16 specifies a 16-bit field in a 32-bit word. BFD_RELOC_16, emitted by generic code to handle fixups on 16-bit data directives, expects fixups to operate on the whole of a 16-bit word. This patch corrects the problem by using BFD_RELOC_MIPS_16, a new bfd reloc that is used to generate R_MIPS_16. BFD_RELOC_16 is handled in md_apply_fix for cases where the fixup can be applied at assembly time. Like BFD_RELOC_8, BFD_RELOC_16 now has no corresponding object file relocation, and thus .half, .hword, .short and .dc.w must be resolved at assembly time. BFD_RELOC_MIPS_REL16 is removed by this patch since it isn't used. PR 3243 PR 26542 * reloc.c (BFD_RELOC_MIPS_16): Rename from BFD_RELOC_MIPS_REL16. * elf32-mips.c (mips_reloc_map): Map BFD_RELOC_MIPS_16 to R_MIPS_16. * elf64-mips.c (mips_reloc_map): Likewise, delete BFD_RELOC_MIPS_REL16. * elfn32-mips.c (mips_reloc_map): Likewise. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. gas/ * config/tc-mips.c (append_insn): Handle BFD_RELOC_MIPS_16. (macro_build): Likewise. (mips_percent_op <%half>): Generate BFD_RELOC_MIPS_16. (md_apply_fix): Handle BFD_RELOC_16 and BFD_RELOC_MIPS_16 when fx_done. ld/ * testsuite/ld-mips-elf/reloc-local-overflow.d, * testsuite/ld-mips-elf/reloc-local-overflow.s: Rewrite. 2022-06-14 Alan Modra Correct R_MIPS_16 n32 howto If the howto is actually used, an all-zero dst_mask will result in unchanged section contents on attempting to apply R_MIPS_16. * elfn32-mips.c (elf_mips_howto_table_rela ): Correct dst_mask. 2022-06-14 Alan Modra asan: applying zero offset to NULL pointer * dwarf.c (fetch_indexed_string): Move initialisation of "curr" and "end" after checking for missing section. 2022-06-14 Alan Modra gas dwarf2dbg.c tidy Make it a little more obvious that remap_debug_filename returns an allocated string (that should be freed) by returning a char * rather than const char *. Free a few missed cases in dwarf2dbg.c, and free other memory allocated in dwarf2dbg.c. Also remove static initialisation of variables and initialise in dwarf2_init instead, in order to ensure gas state is saner for oss-fuzz. * remap.c (remap_debug_filename): Remove const from return. * as.h (remap_debug_filename): Update prototype. * config/obj-elf.c (obj_elf_ident): Simplify free of remap_debug_filename output. * stabs.c (stabs_generate_asm_file): Likewise. * dwarf2dbg.c (dirs, dirs_in_use, dirs_allocated, current): Don't initialise statically.. (dwarf2_init): ..do so here, along with most other static vars. (assign_file_to_slot): Don't set files_allocated until we succeed in allocating memory. (purge_generated_debug): Add bool param, free more stuff if true. (dwarf2_directive_filename): Adjust purge_generated_debug call. (process_entries): Don't free line_entry here.. (dwarf2_cleanup): ..do so here instead, new function. (dwarf2_finish): Call dwarf2_cleanup. When chaining together subseg line entries, unhook entries from old subseg list. (dwarf2_directive_loc): Free remap_debug_filename string. (out_dir_and_file_list): Likewise. (out_debug_str): Likewise. 2022-06-14 GDB Administrator Automatic date update in version.in 2022-06-13 Tom de Vries [gdb/testsuite] Fix gdb.reverse/test_ioctl_TCSETSW.exp with libc debuginfo When running test-case gdb.reverse/test_ioctl_TCSETSW.exp with glibc debuginfo installed, I run into: ... (gdb) PASS: gdb.reverse/test_ioctl_TCSETSW.exp: at TCSETSW call step^M __tcsetattr (fd=0, optional_actions=1, termios_p=0x7fffffffcf50) at \ ../sysdeps/unix/sysv/linux/tcsetattr.c:45^M 45 {^M (gdb) FAIL: gdb.reverse/test_ioctl_TCSETSW.exp: handle TCSETSW ... The problem is that the step is expected to step over the call to tcsetattr, but due to glibc debuginfo being installed, we step into the call. Fix this by using next instead of step. Tested on x86_64-linux. 2022-06-13 Tom de Vries [gdb] Avoid warnings in cooked_{read,write}_test for m68hc11 With --enable-targets=all we have: ... $ gdb -q -batch -ex "maint selftest" ... Running selftest regcache::cooked_read_test::m68hc11. warning: No frame soft register found in the symbol table. Stack backtrace will not work. Running selftest regcache::cooked_read_test::m68hc12. warning: No frame soft register found in the symbol table. Stack backtrace will not work. Running selftest regcache::cooked_read_test::m68hc12:HCS12. warning: No frame soft register found in the symbol table. Stack backtrace will not work. ... Likewise for regcache::cooked_write_test. The warning has no use in the selftest context. Fix this by skipping the specific selftests. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29224 2022-06-13 Tiezhu Yang gdb: LoongArch: Deal with atomic sequence We can't put a breakpoint in the middle of a ll/sc atomic sequence, so look for the end of the sequence and put the breakpoint there. 2022-06-13 Sam James gdb: don't use bashism in configure test Results in configure output like: ``` checking for X... no /var/tmp/portage/sys-devel/gdb-12.1/work/gdb-12.1/gdb/configure: 18837: test: yes: unexpected operator checking whether to use babeltrace... auto ``` ... when /bin/sh is provided by a POSIX-compliant shell, like dash, instead of bash. 2022-06-13 Jiangshuai Li gdb:csky add support target-descriptions for CSKY arch Registers in CSKY architecture included: 1. 32 gprs 2. 16 ars (alternative gprs used for quick interrupt) 3. hi, lo, pc 4. fr0~fr31, fcsr, fid, fesr 5. vr0~vr15 6. ((32 banks) * 32) cr regs (max 32 banks, 32 control regs a bank) For register names: Except over control registers, other registers, like gprs, hi, lo ... are fixed names. Among the 32*32 control registers, some used registers will have fixed names, others will have a default name "cpxcry". 'x' refers to bank, y refers index in the bank(a control register in bank 4 with index 14 will has a default name cp4cr14). For register numbers in GDB: We assign a fixed number to each register in GDB, like: r0~r31 with 0~31 hi, lo with 36, 37 fpu/vpu with 40~71 ... described in function csky_get_supported_register_by_index(). Function csky_get_supported_tdesc_registers_count(): To calculate the total number of registers that GDB can analyze, including those with fixed names and those with default register names. Function csky_get_supported_register_by_index(): To find a supported struct csky_supported_tdesc_register, return a struct include name with regnum via index. Arrays csky_supported_tdesc_feature_names[]: Include all supported feature names in tdesc-xmls. We use the information described above to load the register description file of the target from the stub. When loading, do a little check that whether the register description file contains SP, LR and PC. 2022-06-13 Tom de Vries [gdb/testsuite] Handle quotes in gdb_py_module_available On openSUSE Leap 42.3 with python 3.4, I run into: ... (gdb) python import pygments^M Traceback (most recent call last):^M File "", line 1, in ^M ImportError: No module named 'pygments'^M Error while executing Python code.^M (gdb) FAIL: gdb.base/style.exp: python import pygments ERROR: unexpected output from python import ... because gdb_py_module_available doesn't handle the single quotes around the module name in the ImportError. Fix this by allowing the single quotes. Tested on x86_64-linux. 2022-06-13 Jan Beulich x86: fix incorrect indirection Commit 384e201e5aec ("x86: properly initialize struct instr_info instance(s)") was based on an improperly refreshed patch. Correct the oversight. 2022-06-13 Jan Beulich x86: replace global scratch buffer With its movement to the stack, and with the subsequent desire to initialize the entire instr_info instances, this has become doubly inefficient. Individual users have better knowledge of how big a buffer they need, and in a number of cases going through an intermediate buffer can be avoided altogether. Having got confirmation that it wasn't intentional to print memory operand displacements with inconsistent style, print_displacement() is now using dis_style_address_offset consistently (eliminating the need for callers to pass in a style). While touching print_operand_value() also convert its "hex" parameter to bool. And while altering (and moving) oappend_immediate(), fold oappend_maybe_intel_with_style() into its only remaining caller. Finally where doing adjustments, use snprintf() in favor of sprintf(). 2022-06-13 Jan Beulich x86: avoid string copy when swapping Vex.W controlled operands Now that op_out[] is an array of pointers, there's no need anymore to copy strings. Simply swap the pointers. 2022-06-13 Jan Beulich x86: shrink prefix related disassembler state fields By changing the values used for "artificial" prefix values, all_prefixes[] can be shrunk to array of unsigned char. All that additionally needs adjusting is the printing of possible apparently standalone prefixes when recovering from longjmp(): Simply check whether any prefixes were successfully decoded, to avoid converting opcode bytes matching the "artificial" values to prefix mnemonics. Similarly by re-arranging the bits assigned to PREFIX_* mask values we can fit all segment register masks in a byte and hence shrink active_seg_prefix to unsigned char. Somewhat similarly with last_*_prefix representing offsets into the opcode being disassembled, signed char is sufficient to hold all possible values. 2022-06-13 Jan Beulich x86: properly initialize struct instr_info instance(s) Commit 39fb369834a3 ("opcodes: Make i386-dis.c thread-safe") introduced a lot of uninitialized data. Alan has in particular observed ubsan taking issue with the loop inverting the order of operands, where op_riprel[] - an array of bool - can hold values other than 0 or 1. Move instantiation of struct instr_info into print_insn() (thus having just a single central point), and make use of C99 dedicated initializers to fill fields right in the initializer where possible. This way all fields not explicitly initialized will be zero-filled, which in turn allows dropping of some other explicit initialization later in the function or in ckprefix(). Additionally this removes a lot of indirection, as all "ins->info" uses can simply become "info". Make one further arrangement though, to limit the amount of data needing (zero)initializing on every invocation: Convert the op_out structure member to just an array of pointers, with the actual arrays living inside print_insn() (and, as befoe, having just their 1st char filled with nul). While there, instead of adjusting print_insn()'s forward declaration, arrange for no such declaration to be needed in the first place. 2022-06-13 GDB Administrator Automatic date update in version.in 2022-06-12 Tom Tromey Fix self-test failure in addrmap Mark pointed out that my recent addrmap C++-ficiation changes caused a regression in the self-tests. This patch fixes the problem by updating this test not to allocate the mutable addrmap on an obstack. Remove psymtab_addrmap While working on addrmaps, I noticed that psymtab_addrmap is no longer needed now. It was introduced in ancient times as an optimization for DWARF, but no other symbol reader was ever updated to use it. Now that DWARF does not use psymtabs, it can be deleted. Use malloc for mutable addrmaps Mutable addrmaps currently require an obstack. This was probably done to avoid having to call splay_tree_delete, but examination of the code shows that all mutable obstacks have a limited lifetime -- now it's simple to treat them as ordinary C++ objects, in some cases stack-allocating them, and have a destructor to make the needed call. This patch implements this change. Remove addrmap::create_fixed addrmap::create_fixed is just a simple wrapper for 'new', so remove it in favor of uses of 'new'. Remove addrmap_create_mutable This removes addrmap_create_mutable in favor of using 'new' at the spots where the addrmap is created. Remove addrmap wrapper functions This removes the various addrmap wrapper functions in favor of simple method calls on the objects themselves. Move addrmap classes to addrmap.h This moves the addrmap class definitions to addrmap.h. This is safe to do now that the contents are private. Privacy for addrmap_mutable This changes addrmap_mutable so that its data members are private. Privacy for addrmap_fixed This changes addrmap_fixed so that its data members are private. It also makes struct addrmap_transition private as well. Use inheritance for addrmap This is a simply C++-ification of the basics of addrmap: it uses virtual methods rather than a table of function pointers, and it changes the concrete implementations to be subclasses. 2022-06-12 Jon Turney Trivial fixes to Cygwin build after 8fea1a81 * Remove a stray semicolon * Restore dropped nullptr program argument in use of create_process() under CYGWIN Simplify __USEWIDE Prior to c6ca3dab dropping support for Cygwin 1.5, __USEWIDE was not defined for Cygwin 1.5. After that, it's always defined if __CYGWIN__ is, so remove __USEWIDE conditionals inside __CYGWIN__ conditionals. Simplify cygwin_buf_t Prior to c6ca3dab dropping support for Cygwin 1.5, cygwin_buf_t was defined as char for Cygwin 1.5. After that, it's always wchar_t, so just use that. 2022-06-12 GDB Administrator Automatic date update in version.in 2022-06-11 GDB Administrator Automatic date update in version.in 2022-06-10 Tom Tromey Fix warning-avoidance initialization in xcoffread.c With the registry rewrite series, on Fedora 34, I started seeing this error in xcoffread.c: ../../binutils-gdb/gdb/xcoffread.c: In function ‘void read_xcoff_symtab(objfile*, legacy_psymtab*)’: ../../binutils-gdb/gdb/xcoffread.c:948:25: error: ‘main_aux’ is used uninitialized [-Werror=uninitialized] 948 | union internal_auxent fcn_aux_saved = main_aux; | ^~~~~~~~~~~~~ ../../binutils-gdb/gdb/xcoffread.c:933:25: note: ‘main_aux’ declared here 933 | union internal_auxent main_aux; | ^~~~~~~~ I don't know why this error started suddenly... that seems weird, because it's not obviously related to the changes I made. Looking into it, it seems this line was intended to avoid a similar warning -- but since 'main_aux' is uninitialized at the point where it is used, this fix was incomplete. This patch avoids the warning by initializing using "{}". I'm checking this in. 2022-06-10 Carl Love Fix comparison of unsigned long int to int in record_linux_system_call. The if statement in case gdb_sys_ioctl in function record_linux_system_call in file gdb/linux-record.c is as follows: if (tmpulongest == tdep->ioctl_FIOCLEX || tmpulongest == tdep->ioctl_FIONCLEX .... || tmpulongest == tdep->ioctl_TCSETSW ... } The PowerPC ioctl value for ioctl_TCSETW is 0x802c7415. The variable ioctl_TCSETW is defined in gdb/linux-record.h as an int. The TCSETW value has the MSB set to one so it is a negative integer. The comparison of the unsigned long value tmpulongest to a negative integer value for ioctl_TCSETSW fails. This patch changes the declarations for the ioctl_* values in struct linux_record_tdep to unsigned long to fix the comparisons between tmpulongest and the tdep->ioctl_* values. An additional test gdb.reverse/test_ioctl_TCSETSW.exp is added to verify the gdb record_linux_system_call() if statement for the ioctl TCSETSW succeeds. This patch has been tested on Power 10 and Intel with no test failures. 2022-06-10 Carl Love PowerPC, correct the gdb ioctl values for TCGETS, TCSETS, TCSETSW and TCSETSF. Some of the ioctl numbers are based on the size of kernel termios structure. Currently the PowerPC GDB definitions are "hard coded" into the ioctl number. The current PowerPC values for TCGETS, TCSETS, TCSETSW and TCSETSF are defined in gdb/ppc-linux-tdep.c as: record_tdep->ioctl_TCGETS = 0x403c7413; record_tdep->ioctl_TCSETS = 0x803c7414; record_tdep->ioctl_TCSETSW = 0x803c7415; record_tdep->ioctl_TCSETSF = 0x803c7416; Where the termios structure size is in hex digits [5:4] as 0x3c. The definition for the PowerPC termios structure is given in: arch/powerpc/include/uapi/asm/termbits.h The size of the termios data structure in this file is 0x2c not 0x3c. This patch changes the hex digits for the size of the PowerPC termios size in the ioctl values for TCGETS, TCSETS, TCSETSW and TCSETSF to 0x2c. This patch also changes the hard coding to generate the number based on a it easier to update the ioctl numbers. 2022-06-10 Andrew Burgess gdb/testsuite: remove definition of true/false from gdb_compiler_info Since pretty much forever the get_compiler_info function has included these lines: # Most compilers will evaluate comparisons and other boolean # operations to 0 or 1. uplevel \#0 { set true 1 } uplevel \#0 { set false 0 } These define global variables true (to 1) and false (to 0). It seems odd to me that these globals are defined in get_compiler_info, I guess maybe the original thinking was that if a compiler had different true/false values then we would detect it there and define true/false differently. I don't think we should be bundling this logic into get_compiler_info, it seems weird to me that in order to use $true/$false a user needs to first call get_compiler_info. It would be better I think if each test script that wants these variables just defined them itself, if in the future we did need different true/false values based on compiler version then we'd just do: if { [test_compiler_info "some_pattern"] } { # Defined true/false one way... } else { # Defined true/false another way... } But given the current true/false definitions have been in place since at least 1999, I suspect this will not be needed any time soon. Given that the definitions of true/false are so simple, right now my suggestion is just to define them in each test script that wants them (there's not that many). If we ever did need more complex logic then we can always add a function in gdb.exp that sets up these globals, but that seems overkill for now. There should be no change in what is tested after this commit. 2022-06-10 Luis Machado Document the ARM_CC_FOR_TARGET testsuite variable This variable is useful when exercising AArch64 multi-arch support (debugging 32-bit AArch32 executables). Unfortunately it isn't well documented. This patch adds information about it and explains how to use it. 2022-06-10 Tom de Vries [gdb/testsuite] Fix XPASS with gcc-12 in gdb.base/vla-struct-fields.exp With gcc-12, I get for test-case gdb.base/vla-struct-fields.exp: ... (gdb) print inner_vla_struct_object_size == sizeof(inner_vla_struct_object)^M $7 = 1^M (gdb) XPASS: gdb.base/vla-struct-fields.exp: size of inner_vla_struct_object ... Fix this by limiting the xfailing to gcc-11 and earlier. Also, limit the xfailing to the equality test. Tested on x86_64-linux. 2022-06-10 Tom de Vries [gdb/testsuite] Fix timeout in gdb.ada/ghost.exp On openSUSE Tumbleweed with gcc-12, I run into a timeout: ... (gdb) print value^M Multiple matches for value^M [0] cancel^M [1] ada.strings.maps.value ( ada.strings.maps.character_mapping; \ character) return character at a-strmap.adb:599^M [2] pck.value at src/gdb/testsuite/gdb.ada/ghost/pck.ads:17^M [3] system.object_reader.value ( system.object_reader.object_symbol) \ return system.object_reader.uint64 at s-objrea.adb:2279^M [4] system.traceback.symbolic.value (system.address) return string at \ s-trasym.adb:200^M > FAIL: gdb.ada/ghost.exp: print value (timeout) print ghost_value^M Argument must be choice number^M (gdb) FAIL: gdb.ada/ghost.exp: print ghost_value ... Fix this by prefixing value (as well as the other printed values) with the package name: ... (gdb) print pck.value^M ... Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29055 2022-06-10 GDB Administrator Automatic date update in version.in 2022-06-09 Tom Tromey Minor fix to Python breakpoint event documentation I noticed that the Python event documentation referred to the event's "breakpoint" field as a function, whereas it is actually an attribute. This patch fixes the error. 2022-06-09 Andrew Burgess gdb/aarch64: fix 32-bit arm compatibility GDB's ability to run 32-bit ARM processes on an AArch64 native target is currently broken. The test gdb.multi/multi-arch.exp currently fails with a timeout. The cause of these problems is the following three functions: aarch64_linux_nat_target::thread_architecture aarch64_linux_nat_target::fetch_registers aarch64_linux_nat_target::store_registers What has happened, over time, is that these functions have been modified, forgetting that any particular thread (running on the native target) might be an ARM thread, or might be an AArch64 thread. The problems always start with a line similar to this: aarch64_gdbarch_tdep *tdep = (aarch64_gdbarch_tdep *) gdbarch_tdep (inf->gdbarch); The problem with this line is that if 'inf->gdbarch' is an ARM architecture, then gdbarch_tdep will return a pointer to an arm_gdbarch_tdep object, not an aarch64_gdbarch_tdep object. The result of the above cast will, as a consequence, be undefined. In aarch64_linux_nat_target::thread_architecture, after the undefined cast we then proceed to make use of TDEP, like this: if (vq == tdep->vq) return inf->gdbarch; Obviously at this point the result is undefined, but, if this check returns false we then proceed with this code: struct gdbarch_info info; info.bfd_arch_info = bfd_lookup_arch (bfd_arch_aarch64, bfd_mach_aarch64); info.id = (int *) (vq == 0 ? -1 : vq); return gdbarch_find_by_info (info); As a consequence we will return an AArch64 gdbarch object for our ARM thread! Things go downhill from there on. There are similar problems, with similar undefined behaviour, in the fetch_registers and store_registers functions. The solution is to make use of a check like this: if (gdbarch_bfd_arch_info (inf->gdbarch)->bits_per_word == 32) If the word size is 32 then we know we have an ARM architecture. We just need to make sure that we perform this check before trying to read the tdep field. In aarch64_linux_nat_target::thread_architecture a little reordering, and the addition of the above check allows us to easily avoid the undefined behaviour. For fetch_registers and store_registers I made the decision to split each of the functions into two new helper functions, and so aarch64_linux_nat_target::fetch_registers now calls to either aarch64_fetch_registers or aarch32_fetch_registers, and there's a similar change for store_registers. One thing I had to decide was whether to place the new aarch32_* functions into the aarch32-linux-nat.c file. In the end I decided to NOT place the functions there, but instead leave them in aarch64-linux-nat.c, my reasoning was this: The existing functions in that file are shared from arm-linux-nat.c and aarch64-linux-nat.c, this generic code to support 32-bit ARM debugging from either native target. In contrast, the two new aarch32 functions I have added _only_ make sense when debugging on an AArch64 native target. These function shouldn't be called from arm-linux-nat.c at all, and so, if we places the functions into aarch32-linux-nat.c, the functions would be built into a 32-bit ARM GDB, but never used. With that said, there's no technical reason why they couldn't go in aarch32-linux-nat.c, so if that is preferred I'm happy to move them. After this commit the gdb.multi/multi-arch.exp passes. 2022-06-09 Yvan Roux gdb/arm: Document and fix exception stack offsets Add a description of exception entry context stacking and fix next frame offset (at 0xA8 relative to R0 location) as well as FPU registers ones (starting at 0x68 relative to R0). gdb/arm: Simplify logic for updating addresses Small performance improvement by fetching previous SP value only once before the loop and reuse it to avoid fetching at every iteration. 2022-06-09 Pedro Alves Fix ARM_CC_FOR_TARGET handling The previous patch that introduced the arm_cc_for_target procedure moved the ARM_CC_FOR_TARGET global check to that procedure, but forgot to tell tcl that ARM_CC_FOR_TARGET is a global. As a result, specifying ARM_CC_FOR_TARGET on the command line actually does nothing. This fixes it. Change-Id: I4e33b7633fa665e2f7b8f8c9592a949d74a19153 2022-06-09 Yvan Roux gdb/arm: Terminate unwinding when LR is 0xffffffff ARMv7-M Architecture Reference "A2.3.1 Arm core registers" states that LR is set to 0xffffffff on reset. ARMv8-M Architecture Reference "B3.3 Registers" states that LR is set to 0xffffffff on warm reset if Main Extension is implemented, otherwise the value is unknown. 2022-06-09 Andrew Burgess gdb/testsuite: solve problems with compiler_info caching After this commit: commit 44d469c5f85a4243462b8966722dafa62b602bf5 Date: Tue May 31 16:43:44 2022 +0200 gdb/testsuite: add Fortran compiler identification to GDB Some regressions were noticed: https://sourceware.org/pipermail/gdb-patches/2022-May/189673.html The problem is associated with how compiler_info variable is cached between calls to get_compiler_info. Even before the above commit, get_compiler_info supported two language, C and C++. Calling get_compiler_info would set the global compiler_info based on the language passed as an argument to get_compiler_info, and, in theory, compiler_info would not be updated for the rest of the dejagnu run. This obviously is slightly broken behaviour. If the first call to get_compiler_info was for the C++ language then compiler_info would be set based on the C++ compiler in use, while if the first call to get_compiler_info was for the C language then compiler_info would be set based on the C compiler. This probably wasn't very noticable, assuming a GCC based test environment then in most cases the C and C++ compiler would be the same version. However, if the user starting playing with CC_FOR_TARGET or CXX_FOR_TARGET, then they might not get the behaviour they expect. Except, to make matters worse, most of the time, the user probably would get the behaviour they expected .... except when they didn't! I'll explain: In gdb.exp we try to avoid global variables leaking between test scripts, this is done with the help of the two procs gdb_setup_known_globals and gdb_cleanup_globals. All known globals are recorded before a test script starts, and then, when the test script ends, any new globals are deleted. Normally, compiler_info is only set as a result of a test script calling get_compiler_info or test_compiler_info. This means that the compiler_info global will not exist when the test script starts, but will exist when the test script end, and so, the compiler_info variable is deleted at the end of each test. This means that, in reality, the compiler_info is recalculated once for each test script, hence, if a test script just checks on the C compiler, or just checks on the C++ compiler, then compiler_info will be correct and the user will get the behaviour they expect. However, if a single test script tries to check both the C and C++ compiler versions then this will not work (even before the above commit). The situation is made worse be the behaviour or the load_lib proc. This proc (provided by dejagnu) will only load each library once. This means that if a library defines a global, then this global would normally be deleted at the end of the first test script that includes the library. As future attempts to load the library will not actually reload it, then the global will not be redefined and would be missing for later test scripts that also tried to load that library. To work around this issue we override load_lib in gdb.exp, this new version adds all globals from the newly loaded library to the list of globals that should be preserved (not deleted). And this is where things get interesting for us. The library trace-support.exp includes calls, at the file scope, to things like is_amd64_regs_target, which cause get_compiler_info to be called. This means that after loading the library the compiler_info global is defined. Our override of load_lib then decides that this new global has to be preserved, and adds it to the gdb_persistent_globals array. From that point on compiler_info will never be recomputed! This commit addresses all the caching problems by doing the following: Change the compiler_info global into compiler_info_cache global. This new global is an array, the keys of this array will be each of the supported languages, and the values will be the compiler version for that language. Now, when we call get_compiler_info, if the compiler information for the specific language has not been computed, then we do that, and add it to the cache. Next, compiler_info_cache is defined by calling gdb_persistent_global. This automatically adds the global to the list of persistent globals. Now the cache will not be deleted at the end of each test script. This means that, for a single test run, we will compute the compiler version just once for each language, this result will then be cached between test scripts. Finally, the legacy 'gcc_compiled' flag is now only set when we call get_compiler_info with the language 'c'. Without making this change the value of 'gcc_compiled' would change each time a new language is passed to get_compiler_info. If the last language was e.g. Fortran, then gcc_compiled might be left false. 2022-06-09 Andrew Burgess gdb/testsuite: handle errors better in test_compiler_info Now that get_compiler_info might actually fail (if the language is not handled), then we should try to handle this failure better in test_compiler_info. After this commit, if get_compiler_info fails then we will return a suitable result depending on how the user called test_compiler_info. If the user does something like: set version [test_compiler_info "" "unknown-language"] Then test_compiler_info will return an empty string. My assumption is that the user will be trying to match 'version' against something, and the empty string hopefully will not match. If the user does something like: if { [test_compiler_info "some_pattern" "unknown-language"] } { .... } Then test_compiler_info will return false which seems the obvious choice. There should be no change in the test results after this commit. 2022-06-09 Andrew Burgess gdb/testsuite: make 'c' default language for get/test compiler info This commit is a minor cleanup for the two functions (in gdb.exp) get_compiler_info and test_compiler_info. Instead of using the empty string as the default language, and just "knowing" that this means the C language. Make this explicit. The language argument now defaults to "c" if not specified, and the if chain in get_compiler_info that checks the language not explicitly handles "c" and gives an error for unknown languages. This is a good thing, now that the API appears to take a language, if somebody does: test_compiler_info "xxxx" "rust" to check the version of the rust compiler then we will now give an error rather than just using the C compiler and leaving the user having to figure out why they are not getting the results they expect. After a little grepping, I think the only place we were explicitly passing the empty string to either get_compiler_info or test_compiler_info was in gdb_compile_shlib_1, this is now changed to pass "c" as the default language. There should be no changes to the test results after this commit. 2022-06-09 Andrew Burgess gdb/testsuite: remove get_compiler_info calls from gdb.exp and dwarf.exp We don't need to call get_compiler_info before calling test_compiler_info; test_compiler_info includes a call to get_compiler_info. This commit cleans up lib/gdb.exp and lib/dwarf.exp a little by removing some unneeded calls to get_compiler_info. We could do the same cleanup throughout the testsuite, but I'm leaving that for another day. There should be no change in the test results after this commit. 2022-06-09 Nils-Christian Kempke gdb/testsuite: use test_compiler_info in gcc_major_version The procedure gcc_major_version was earlier using the global variable compiler_info to retrieve gcc's major version. This is discouraged and (as can be read in a comment in compiler.c) compiler_info should be local to get_compiler_info and test_compiler_info. The preferred way of getting the compiler string is via calling test_compiler_info without arguments. Gcc_major_version was changed to do that. 2022-06-09 Yvan Roux gdb: add Yvan Roux to gdb/MAINTAINERS 2022-06-09 Andrew Burgess gdb/testsuite: resolve duplicate test names in gdb.threads/tls.exp While running the gdb.threads/tls.exp test with a GDB configured without Python, I noticed some duplicate test names. This is caused by a call to skip_python_tests that is within a proc that is called multiple times by the test script. Each call to skip_python_tests results in a call to 'unsupported', and this causes the duplicate test names. After this commit we now call skip_python_tests just once and place the result into a variable. Now, instead of calling skip_python_tests multiple times, we just check the variable. There should be no change in what is tested after this commit. 2022-06-09 Andrew Burgess gdb/testsuite: resolve duplicate test name in gnu_vector.exp While testing on AArch64 I spotted a duplicate test name in the gdb.base/gnu_vector.exp test. This commit adds a 'with_test_prefix' to resolve the duplicate. While I was in the area I updated a 'gdb_test_multiple' call to make use of $gdb_test_name. There should be no change in what is tested after this commit. 2022-06-09 GDB Administrator Automatic date update in version.in 2022-06-08 Andrew Burgess gdb: make throw_perror_with_name static The throw_perror_with_name function is not used outside of utils.c right now. And as perror_with_name is just a wrapper around throw_perror_with_name, then any future calls would be to perror_with_name. Lets make throw_perror_with_name static. There should be no user visible changes after this commit. 2022-06-08 Andrew Burgess gdb: remove trailing '.' from perror_with_name calls I ran into this error while working on AArch64 GDB: Unable to fetch VFP registers.: Invalid argument. Notice the '.:' in the middle of this error message. This is because of this call in aarch64-linux-nat.c: perror_with_name (_("Unable to fetch VFP registers.")); The perror_with_name function take a string, and adds ': ' to the end the string, so I don't think the string that we pass to perror_with_name should end in '.'. This commit removes all of the trailing '.' characters from perror_with_name calls, which give more readable error messages. I don't believe that any of these errors are tested in the testsuite (after a little grepping). 2022-06-08 Tom Tromey Move CU queue to dwarf2_per_objfile The CU queue is a member of dwarf2_per_bfd, but it is only used when expanding CUs. Also, the dwarf2_per_objfile destructor checks the queue -- however, if the per-BFD object is destroyed first, this will not work. This was pointed out Lancelot as fallout from the patch to rewrite the registry system. This patch avoids this problem by moving the queue to the per-objfile object. 2022-06-08 Tom Tromey Change allocation of m_dwarf2_cus m_dwarf2_cus manually manages the 'dwarf2_cu' pointers it owns. This patch simplifies the code by changing it to use unique_ptr. 2022-06-08 Andrew Burgess libopcodes: extend the styling within the i386 disassembler The i386 disassembler is pretty complex. Most disassembly is done indirectly; operands are built into buffers within a struct instr_info instance, before finally being printed later in the disassembly process. Sometimes the operand buffers are built in a different order to the order in which they will eventually be printed. Each operand can contain multiple components, e.g. multiple registers, immediates, other textual elements (commas, brackets, etc). When looking for how to apply styling I guess the ideal solution would be to move away from the operands being a single string that is built up, and instead have each operand be a list of "parts", where each part is some text and a style. Then, when we eventually print the operand we would loop over the parts and print each part with the correct style. But it feels like a huge amount of work to move from where we are now to that potentially ideal solution. Plus, the above solution would be pretty complex. So, instead I propose a .... different solution here, one that works with the existing infrastructure. As each operand is built up, piece be piece, we pass through style information. This style information is then encoded into the operand buffer (see below for details). After this the code can continue to operate as it does right now in order to manage the set of operand buffers. Then, as each operand is printed we can split the operand buffer into chunks at the style marker boundaries, with each chunk being printed with the correct style. For encoding the style information I use a single character, currently \002, followed by the style encoded as a single hex digit, followed again by the \002 character. This of course relies on there not being more than 16 styles, but that is currently true, and hopefully will remain true for the foreseeable future. The other major concern that has arisen around this work is whether the escape character could ever be encountered in output naturally generated by the disassembler. If this did happen then the escape characters would be stripped from the output, and the wrong styling would be applied. However, I don't believe that this is currently a problem. Disassembler content comes from a number of sources. First there's content that copied directly from the i386-dis.c file, this is things like register names, and other syntax elements (brackets, commas, etc). We can easily check that the i386-dis.c file doesn't contain our special character. The next source of content are immediate operands. The text for these operands is generated by calls into libc. By selecting a non-printable character we can be confident that this is not something that libc will generate as part of an immediate representation. The other output that appears to be from the disassembler is operands that contain addresses and (possibly) symbol names. It is quite possible that a symbol name might contain any special character we could imagine, so is this a problem? I don't think it is, we don't actually print address and symbol operands through the disassembler, instead, the disassembler calls back to the user (objdump, gdb, etc) to print the address and symbol on its behalf. This content is printed directly to the output stream, it does not pass through the i386 disassembler output buffers. As a result, we never check this particular output for styling escape characters. In some (not very scientific) benchmarking on my machine, disassembling a reasonably large (142M) shared library, I'm not seeing any significant slow down in disassembler speed with this change. Most instructions are now being fully syntax highlighted when I disassemble using the --disassembler-color=extended-color option. I'm sure that there are probably still a few corner cases that need fixing up, but we can come back to them later I think. When disassembler syntax highlighting is not being used, then there should be no user visible changes after this commit. 2022-06-08 Carl Love Fix gdb.arch/powerpc-power7.exp isel disassembly output. The following commit changes the output format for the isel instruction on PowerPC. commit dd4832bf3efc1bd1797a6b9188260692b8b0db52 Introduces error in test Author: Dmitry Selyutin Date: Tue May 24 13:46:35 2022 +0000 opcodes: introduce BC field; fix isel Per Power ISA Version 3.1B 3.3.12, isel uses BC field rather than CRB field present in binutils sources. Also, per 1.6.2, BC has the same semantics as BA and BB fields, so this should keep the same flags and mask, only with the different offset. opcodes/ * ppc-opc.c (BC): Define new field, with the same definition as CRB field, but with the PPC_OPERAND_CR_BIT flag present. gas/ * testsuite/gas/ppc/476.d: Update. * testsuite/gas/ppc/a2.d: Update. * testsuite/gas/ppc/e500.d: Update. * testsuite/gas/ppc/power7.d: Update. --- a/gas/testsuite/gas/ppc/476.d +++ b/gas/testsuite/gas/ppc/476.d @@ -209,7 +209,7 @@ Disassembly of section \.text: .*: (7c 20 07 8c|8c 07 20 7c) ici 1 .*: (7c 03 27 cc|cc 27 03 7c) icread r3,r4 .*: (50 83 65 36|36 65 83 50) rlwimi r3,r4,12,20,27 -.*: (7c 43 27 1e|1e 27 43 7c) isel r2,r3,r4,28 +.*: (7c 43 27 1e|1e 27 43 7c) isel r2,r3,r4,4\*cr7\+lt The above change breaks the gdb regression test gdb.arch/powerpc-power7.exp on Power 7, Power 8, Power 9 and Power 10. This patch updates the regression test gdb.arch/powerpc-power7.exp with the new expected output for the isel instruction. The patch has been tested on Power 7 and Power 10 to verify the patch fixes the test. 2022-06-08 Pedro Alves aarch64: Add fallback if ARM_CC_FOR_TARGET not set On Aarch64, you can set ARM_CC_FOR_TARGET to point to the 32-bit compiler to use when testing gdb.multi/multi-arch.exp and gdb.multi/multi-arch-exec.exp. If you don't set it, then those testcases don't run. I guess that approximately nobody remembers to set ARM_CC_FOR_TARGET. This commit adds a fallback. If ARM_CC_FOR_TARGET is not set, and testing for Linux, try arm-linux-gnueabi-gcc, arm-none-linux-gnueabi-gcc, arm-linux-gnueabihf-gcc as 32-bit compilers, making sure that the produced executable runs on the target machine before claiming that the compiler produces useful executables. Change-Id: Iefe5865d5fc84b4032eaff7f4c5c61582bf75c39 2022-06-08 Alan Modra Don't encode reloc.size I expect the encoded reloc.size field originally came from aout r_length ecoding, but somehow went wrong for 64-bit relocs (which should have been encoded as 3). Toss all that out, just use a byte size instead. The changes outside of reloc.c in this patch should make the code independent of how reloc.size is encoded. * reloc.c (struct reloc_howto_struct): Increase size field by one bit. Comment. (HOWTO_RSIZE): Don't encode size. (bfd_get_reloc_size): Adjust, and make it an inline function. (read_reloc, write_reloc): Adjust. * bfd-in2.h: Regenerate. * aout-ns32k.c: Include libbfd.h. (put_reloc): Don't use howto->size directly. Calculate r_length using bfd_log2 and bfd_get_reloc_size. * aoutx.h (swap_std_reloc_out): Likewise. (aout_link_reloc_link_order): Likewise. * i386lynx.c (swap_std_reloc_out * mach-o-i386.c (bfd_mach_o_i386_swap_reloc_out * pdp11.c (aout_link_reloc_link_order * coff-arm.c (coff_arm_reloc): Don't use howto->size directly, use bfd_get_reloc_size instead and adjust switch cases. * coff-i386.c (coff_i386_reloc): Similarly. * coff-x86_64.c (coff_amd64_reloc): Likewise. * cpu-ns32k.c (do_ns32k_reloc): Likewise. * elf32-arc.c (arc_do_relocation): Likewise. * elf32-arm.c (elf32_arm_final_link_relocate): Likewise. * elf32-bfin.c (bfin_bfd_reloc): Likewise. * elf32-cr16.c (cr16_elf_final_link_relocate): Likewise. * elf32-cris.c (cris_elf_pcrel_reloc): Likewise. * elf32-crx.c (crx_elf_final_link_relocate): Likewise. * elf32-csky.c (csky_elf_relocate_section): Likewise. * elf32-d10v.c (extract_rel_addend, insert_rel_addend): Likewise. * elf32-i386.c (elf_i386_relocate_section): Likewise. * elf32-m32r.c (m32r_elf_generic_reloc): Likewise. * elf32-nds32.c (nds32_elf_generic_reloc): Likewise. * syms.c (_bfd_stab_section_find_nearest_line): Likewise. * coff-rs6000.c (xcoff_ppc_relocate_section): Adjust howto.size. * coff64-rs6000.c (xcoff64_ppc_relocate_section): Likewise. 2022-06-08 Alan Modra bfin reloc offset checks These all ought to use bfd_reloc_offset_in_range. In particular, replace the check using howto->size + 1u. * elf32-bfin.c (bfin_pcrel24_reloc): Use bfd_reloc_offset_in_range. (bfin_imm16_reloc, bfin_byte4_reloc, bfin_bfd_reloc), (bfin_final_link_relocate): Likewise. 2022-06-08 Alan Modra Revert reloc howto nits The "HOWTO size encoding" patch put 1 as the HOWTO size arg for numerous howtos that are unused, describe dynamic relocs, are markers, or otherwise are special purpose reloc howtos that don't care about the size. The idea was to ensure no howto changed by inspecting object files. Revert those changes, making them zero size. * coff-alpha.c: Give special purpose reloc howtos a size of zero. * coff-mcore.c, * elf-hppa.h, * elf-m10300.c, * elf32-arm.c, * elf32-csky.c, * elf32-m32c.c, * elf32-m68k.c, * elf32-mep.c, * elf32-mips.c, * elf32-ppc.c, * elf32-rx.c, * elf32-s390.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilepro.c, *elf32-vax.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-mips.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elfn32-mips.c, * elfxx-loongarch.c, * elfxx-riscv.c, * elfxx-sparc.c, * elfxx-tilegx.c, * som.c, * vms-alpha.c: Likewise. 2022-06-08 Alan Modra HOWTO size encoding This changes the HOWTO macro to encode the howto.size field from a value given in bytes. This of course requires editing all target uses of HOWTO, a major pain, but makes it a little nicer to specify new target HOWTOs. Object files before/after this patch are unchanged in .data and .rodata. bfd/ * reloc.c (HOWTO_RSIZE): Encode size in bytes. (EMPTY_HOWTO): Adjust to keep it all zero. * aout-ns32k.c, * aoutx.h, * coff-alpha.c, * coff-arm.c, * coff-i386.c, * coff-mcore.c, * coff-mips.c, * coff-rs6000.c, * coff-sh.c, * coff-tic30.c, * coff-tic4x.c, * coff-tic54x.c, * coff-x86_64.c, * coff-z80.c, * coff-z8k.c, * coff64-rs6000.c, * elf-hppa.h, * elf-m10200.c, * elf-m10300.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c, * elf32-d10v.c, * elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-gen.c, * elf32-h8300.c, * elf32-i386.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c, * elf32-m68k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c, * elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s12z.c, * elf32-s390.c, * elf32-score.c, * elf32-score7.c, * elf32-sh-relocs.h, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c, * elf32-wasm32.c, * elf32-xc16x.c, * elf32-xgate.c, * elf32-xstormy16.c, * elf32-xtensa.c, * elf32-z80.c, * elf64-alpha.c, * elf64-bpf.c, * elf64-gen.c, * elf64-mips.c, * elf64-mmix.c, * elf64-nfp.c, * elf64-ppc.c, * elf64-s390.c, * elf64-x86-64.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfxx-ia64.c, * elfxx-loongarch.c, * elfxx-mips.c, * elfxx-riscv.c, * elfxx-sparc.c, * elfxx-tilegx.c, * mach-o-aarch64.c, * mach-o-arm.c, * mach-o-i386.c, * mach-o-x86-64.c, * pdp11.c, * reloc.c, * som.c, * vms-alpha.c: Adjust all uses of HOWTO. * bfd-in2.h: Regenerate. include/ * elf/arc-reloc.def: Adjust all uses of HOWTO. 2022-06-08 Alan Modra HOWTO_RSIZE Define a helper macro for HOWTO. * reloc.c (HOWTO_RSIZE): Define. (HOWTO): Use it. * bfd-in2.h: Regenerate. 2022-06-08 Alan Modra elf64-nfp reloc fix These are all dummy howtos, there is no reason one of them should have partial_inplace true. * elf64-nfp.c (elf_nfp_howto_table ): Don't set partial_inplace. 2022-06-08 Alan Modra coff-z80 reloc howto fixes Mostly cosmetic unless attempting to link coff-z80 into another output format. * coff-z80.c (howto_table ): Correct size. (extra_case): Use bfd_{get,put}_24 when applying R_IMM24. 2022-06-08 Alan Modra NONE reloc fixes Make them all zero size standard do-nothing howtos. * elf32-csky.c (csky_elf_howto_table ): Correct howto. * elf32-ft32.c (ft32_elf_howto_table ): Likewise. * elf32-gen.c (dummy): Likewise. * elf32-nds32.c (none_howto): Likewise. * elf32-nios2.c (elf_nios2_r2_howto_table_rel ): Likewise. * elf32-pru.c (elf_pru_howto_table_rel ): Likewise. * elf32-v850.c (v800_elf_howto_table ): Likewise. * elf64-gen.c (dummy): Likewise. * elfn32-mips.c (elf_mips_howto_table_rela asan: double free sb_kill oss-fuzz hits a flaky crash with a double-free. I think this is due to gas static state not being reinitialised between testcases, a bug with oss-fuzz not gas. Anyway, this patch should avoid the problem. * input-scrub.c (input_scrub_push): Move init of sb_index.. (input_scrub_reinit): ..to here. 2022-06-08 GDB Administrator Automatic date update in version.in 2022-06-07 Tom Tromey Use subclasses of windows_process_info This changes windows_process_info to use virtual methods for its callbacks, and then changes the two clients of this code to subclass this class to implement the methods. I considered using CRTP here, but that would require making the new structures visible to the compilation of of nat/windows-nat.c. This seemed like a bit of a pain, so I didn't do it. This change then lets us change all the per-inferior globals to be members of the new subclass. Note that there can still only be a single inferior -- currently there's a single global of the new type. This is just another step toward possibly implementing multi-inferior for Windows. It's possible this could be cleaned up further... ideally I'd like to move more of the data into the base class. However, because gdb supports Cygwin and gdbserver does not, and because I don't have a way to build or test Cygwin, larger refactorings are difficult. 2022-06-07 Tom Tromey Turn some windows-nat.c static functions into methods This patch turns some windows-nat.c static functions into methods on windows_nat_target. This avoids having to reference the windows_nat_target singleton in some more spots -- a minor code cleanup. Allow ASLR to be disabled on Windows On Windows, it is possible to disable ASLR when creating a process. This patch adds code to do this, and hooks it up to gdb's existing disable-randomization feature. Because the Windows documentation cautions that this isn't available on all versions of Windows, the CreateProcess wrapper function is updated to make the attempt, and then fall back to the current approach if it fails. Introduce wrapper for CreateProcess This is a small refactoring that introduces a wrapper for the Windows CreateProcess function. This is done to make the next patch a bit simpler. 2022-06-07 Enze Li Update my email address in gdb/MAINTAINERS 2022-06-07 Tom Tromey Constify solib_name_from_address I noticed that solib_name_from_address returned a non-const string, but it's more appropriate to return const. This patch implements this. Tested by rebuilding. 2022-06-07 Tom de Vries [gdb/rust] Add missing _() for error call In commit 1390b65a1b9 ("[gdb/rust] Fix literal truncation") I forgot to add _() around a string using in an error call. Fix this by adding the missing _(). Tested on x86_64-linux. 2022-06-07 Tom de Vries [gdb] Allow frv::fr300 in selftests In skip_arch in gdb/selftest-arch.c we skip architecture fr300 because of PR20946, but the PR has been fixed by commit 0ae60c3ef45 ("Prevent an abort in the FRV disassembler if the target bfd name is unknown.") in Januari 2017. Remove the skipping of frv::fr300. Tested on x86_64-linux. 2022-06-07 GDB Administrator Automatic date update in version.in 2022-06-06 Tom Tromey Consolidate "Python API" sections in NEWS I noticed that the gdb NEWS file had two "Python API" sections in "Changes since GDB 12". This patch consolidates the two. I chose to preserve the second one, first because it is longer, and second because I felt that user command changes should come before API changes. Simplify varobj "change" logic varobj used to store 'print_value' as a C string, where NULL was a valid value, and so it had logic to handle this situation. However, at some point this was changed to be a std::string, and so the code can be simplified in this spot. 2022-06-06 Tom Tromey Remove "-break-insert -r" tests PR mi/14270 points out that mi-break.exp has some tests for an unimplemented "-r" switch for "-break-insert". This switch was never implemented, and is not documented -- though it is mentioned in a comment in the documentation. This patch removes the test and the doc comment. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=14270 2022-06-06 Tom de Vries [gdb] Name arch selftests more clearly When running some all archs selftest I get: ... $ gdb -q -batch -ex "maint selftest unpack_field_as_long" Running selftest unpack_field_as_long::A6. ... By now I know that A6 is an arc architecture, but for others that's less clear. Fix this by using unpack_field_as_long::arc::A6 instead. This then introduces redundant names like arm::arm, so try to avoid those, though I'm not entirely convinced that that's worth the trouble. This introduces the following new names: ... +Running selftest unpack_field_as_long::am33_2::am33-2. +Running selftest unpack_field_as_long::arc::A6. +Running selftest unpack_field_as_long::arc::A7. +Running selftest unpack_field_as_long::arc::EM. +Running selftest unpack_field_as_long::arc::HS. +Running selftest unpack_field_as_long::arm::ep9312. +Running selftest unpack_field_as_long::arm::iwmmxt. +Running selftest unpack_field_as_long::arm::iwmmxt2. +Running selftest unpack_field_as_long::arm::xscale. +Running selftest unpack_field_as_long::bpf::xbpf. +Running selftest unpack_field_as_long::frv::fr400. +Running selftest unpack_field_as_long::frv::fr450. +Running selftest unpack_field_as_long::frv::fr500. +Running selftest unpack_field_as_long::frv::fr550. +Running selftest unpack_field_as_long::frv::simple. +Running selftest unpack_field_as_long::frv::tomcat. +Running selftest unpack_field_as_long::iq2000::iq10. +Running selftest unpack_field_as_long::m32c::m16c. +Running selftest unpack_field_as_long::mep::c5. +Running selftest unpack_field_as_long::mep::h1. +Running selftest unpack_field_as_long::nds32::n1. +Running selftest unpack_field_as_long::nds32::n1h. +Running selftest unpack_field_as_long::nds32::n1h_v2. +Running selftest unpack_field_as_long::nds32::n1h_v3. +Running selftest unpack_field_as_long::nds32::n1h_v3m. +Running selftest unpack_field_as_long::z80::ez80-adl. +Running selftest unpack_field_as_long::z80::ez80-z80. +Running selftest unpack_field_as_long::z80::gbz80. +Running selftest unpack_field_as_long::z80::r800. +Running selftest unpack_field_as_long::z80::z180. ... Tested on x86_64-linux. 2022-06-06 Tom de Vries [gdb] Enable some more print_one_insn selftests In print_one_insn_test we have this cluster of skipped tests: ... case bfd_arch_ia64: case bfd_arch_mep: case bfd_arch_mips: case bfd_arch_tic6x: case bfd_arch_xtensa: return; ... Enable some of these, and document in more detail why they're enabled or skipped. Likewise, document bfd_arch_or1k because it's an odd case. Tested on x86_64-linux. 2022-06-06 Tom de Vries [gdb] Fix maint selftest -v print_one_insn When running the print_one_insn selftests with -v, I get: ... $ gdb -q -batch -ex "maint selftest -v print_one_insn" Running selftest print_one_insn::A6. .shor 0x783eRunning selftest print_one_insn::A7. trap_s 0x1Running selftest print_one_insn::ARC600. .shor 0x783eRunning selftest print_one_insn::ARC601. Running selftest print_one_insn::ARC700. trap_s 0x1Running selftest print_one_insn::ARCv2. trap_s 0x1Running selftest print_one_insn::EM. trap_s 0x1Running selftest print_one_insn::HS. trap_s 0x1Running selftest print_one_insn::Loongarch32. ... The insn is written to gdb_stdout, and there is code in the selftest to add a newline after the insn, which writes to stream(). The stream() ui_file points into a string buffer, which the disassembler uses before writing to gdb_stdout, so writing into it after the disassembler has finished has no effect. Fix this by using gdb_stdlog and debug_printf (which is what the unit test infrastructure itself uses) instead, such that we have: ... Running selftest print_one_insn::A6. .shor 0x783e Running selftest print_one_insn::A7. trap_s 0x1 Running selftest print_one_insn::ARC600. .shor 0x783e Running selftest print_one_insn::ARC601. Running selftest print_one_insn::ARC700. trap_s 0x1 Running selftest print_one_insn::ARCv2. trap_s 0x1 Running selftest print_one_insn::Loongarch32. ... Note: I've also removed the printing of arch_name, which would give us otherwise the redundant: ... Running selftest print_one_insn::A6. arc .shor 0x783e Running selftest print_one_insn::A7. arc trap_s 0x1 ... Tested on x86_64-linux. 2022-06-06 Andrew Burgess gdb/testsuite: add missing skip_python_tests call in py-doc-reformat.exp In commit: commit 51e8dbe1fbe7d8955589703140ca5eba7b4f1bd7 Date: Mon May 16 19:26:54 2022 +0100 gdb/python: improve formatting of help text for user defined commands the test that was added (gdb.python/py-doc-reformat.exp) was missing a call to skip_python_tests. As a result, this test would fail for any GDB built within Python support. This commit adds a call to skip_python_tests. 2022-06-06 GDB Administrator Automatic date update in version.in 2022-06-05 Tom Tromey Remove obsolete Python 2 comment I found a comment that referred to Python 2, but that is now obsolete -- the code it refers to is gone. I'm checking in this patch to remove the comment. There's a similar comment elsewhere, but I plan to remove that one in another patch I'm going to submit shortly. 2022-06-05 GDB Administrator Automatic date update in version.in 2022-06-04 Alan Modra asan: null dereference in coff_count_linenumbers * coffgen.c (coff_count_linenumbers): Don't segfault when asymbol the_bfd is NULL. asan: uninitialised write in bfd_mach_o_write_contents * mach-o.c (bfd_mach_o_write_contents): Always set bfd_mach_o_dyld_info_command *_off fields. 2022-06-04 Tom de Vries [gdb/ada] Fix literal truncation Make sure we error out on overflow instead of truncating in all cases. Tested on x86_64-linux, with a build with --enable-targets=all. 2022-06-04 Tom de Vries [gdb/m2] Fix UB and literal truncation Rewrite parse_number to use ULONGEST instead of LONGEST, to fix UB errors as mentioned in PR29163. Furthermore, make sure we error out on overflow instead of truncating in all cases. Tested on x86_64-linux, with a build with --enable-targets=all. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29163 2022-06-04 Tom de Vries [gdb/rust] Fix literal truncation Make sure we error out on overflow instead of truncating in all cases. I've used as overflow string: "Integer literal is too large", based on what I found at /src/test/ui/parser/int-literal-too-large-span.rs but perhaps someone has a better idea. Tested on x86_64-linux, with a build with --enable-targets=all. 2022-06-04 Tom de Vries [gdb/pascal] Fix literal truncation Make sure we error out on overflow instead of truncating in all cases. The current implementation of parse_number contains a comment about PR16377, but that's related to C-like languages. In absence of information of whether the same fix is needed for pascal, take the conservative approach and keep behaviour for decimals unchanged. Tested on x86_64-linux, with a build with --enable-targets=all. 2022-06-04 Tom de Vries [gdb/go] Fix literal truncation Make sure we error out on overflow instead of truncating in all cases. The current implementation of parse_number contains a comment about PR16377, but that's related to C-like languages. In absence of information of whether the same fix is needed for go, take the conservative approach and keep behaviour for decimals unchanged. Tested on x86_64-linux, with a build with --enable-targets=all. 2022-06-04 Tom de Vries [gdb/fortran] Fix literal truncation As mentioned in commit 5b758627a18 ("Make gdb.base/parse_number.exp test all architectures"): ... There might be a bug that 32-bit fortran truncates 64-bit values to 32-bit, given "p/x 0xffffffffffffffff" returns "0xffffffff". ... More concretely, we have: ... $ for arch in i386:x86-64 i386; do \ gdb -q -batch -ex "set arch $arch" -ex "set lang fortran" \ -ex "p /x 0xffffffffffffffff"; \ done The target architecture is set to "i386:x86-64". $1 = 0xffffffffffffffff The target architecture is set to "i386". $1 = 0xffffffff ... Fix this by adding a range check in parse_number in gdb/f-exp.y. Furthermore, make sure we error out on overflow instead of truncating in all other cases. Tested on x86_64-linux. 2022-06-04 Tom de Vries [gdb/c] Fix type of 2147483648 and literal truncation [ Assuming arch i386:x86-64, sizeof (int) == 4, sizeof (long) == sizeof (long long) == 8. ] Currently we have (decimal for 0x80000000): ... (gdb) ptype 2147483648 type = unsigned int ... According to C language rules, unsigned types cannot be used for decimal constants, so the type should be long instead (reported in PR16377). Fix this by making sure the type of 2147483648 is long. The next interesting case is (decimal for 0x8000000000000000): ... (gdb) ptype 9223372036854775808 type = unsigned long ... According to the same rules, unsigned long is incorrect. Current gcc uses __int128 as type, which is allowed, but we don't have that available in gdb, so the strict response here would be erroring out with overflow. Older gcc without __int128 support, as well as clang use an unsigned type, but with a warning. Interestingly, clang uses "unsigned long long" while gcc uses "unsigned long", which seems the better choice. Given that the compilers allow this as a convience, do the same in gdb and keep type "unsigned long", and make this explicit in parser and test-case. Furthermore, make sure we error out on overflow instead of truncating in all cases. Tested on x86_64-linux with --enable-targets=all. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=16377 2022-06-04 Tom de Vries [gdb/testsuite] Test more values in gdb.base/parse_numbers.exp Currently we only test value 0xffffffffffffffff in test-case gdb.base/parse_numbers.exp. Test more interesting values, both in decimal and hex format, as well as negative decimals for language modula-2. This results in an increase in total tests from 15572 to 847448 (55 times more tests). Balance out the increase in runtime by reducing the number of architectures tested: only test one architecture per sizeof longlong/long/int/short combination, while keeping the possibility intact to run with all architectures (through setting a variable in the test-case) Results in slight reduction of total tests: 15572 -> 13853. Document interesting cases in the expected results: - wrapping from unsigned to signed - truncation - PR16377: using unsigned types to represent decimal constants in C Running the test-case with a gdb build with -fsanitize=undefined, we trigger two UB errors in the modula-2 parser, filed as PR29163. Tested on x86_64-linux with --enable-targets=all. 2022-06-04 Tom de Vries [gdb/testsuite] Fix ERROR in gdb.ctf/funcreturn.exp On openSUSE Tumbleweed (with gcc-12, enabling ctf tests) I run into: ... ERROR: tcl error sourcing src/gdb/testsuite/gdb.ctf/funcreturn.exp. ERROR: tcl error code NONE ERROR: Unexpected arguments: \ {print v_double_func} \ {[0-9]+ = {double \(\)} 0x[0-9a-z]+.*} \ {print double function} \ } ... The problem is a curly brace as fourth argument to gdb_test, which errors out due to recently introduced more strict argument checking in gdb_test. Fix the error by removing the brace. Though this fixes the error for me, due to PR29160 I get only FAILs, so I can't claim proper testing on x86_64-linux. 2022-06-04 Tom de Vries [gdb/testsuite] Fix gdb.threads/manythreads.exp with check-read1 When running test-case gdb.threads/manythreads.exp with check-read1, I ran into this hard-to-reproduce FAIL: ... [New Thread 0x7ffff7318700 (LWP 31125)]^M [Thread 0x7ffff7321700 (LWP 31124) exited]^M [New T^C^M ^M Thread 769 "manythreads" received signal SIGINT, Interrupt.^M [Switching to Thread 0x7ffff6d66700 (LWP 31287)]^M 0x00007ffff7586a81 in clone () from /lib64/libc.so.6^M (gdb) FAIL: gdb.threads/manythreads.exp: stop threads 1 ... The matching in the failing gdb_test_multiple is done in an intricate way, trying to pass on some order and fail on another order. Fix this by rewriting the regexps to match one line at most, and detecting invalid order by setting and checking state variables. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29177 2022-06-04 Tom de Vries [gdb] Fix warning in print_one_insn::ez80-adl When running selftest print_one_insn::ez80-adl we run into this warning: ... Running selftest print_one_insn::ez80-adl. warning: Unable to determine inferior's software breakpoint type: couldn't find `_break_handler' function in inferior. Will be used default software \ breakpoint instruction RST 0x08. ... Fix this by explicitly handling bfd_arch_z80 in print_one_insn_test. Tested on x86_64-linux. 2022-06-04 GDB Administrator Automatic date update in version.in 2022-06-03 Tom Tromey Use bool for evregpy_no_listeners_p I noticed that evregpy_no_listeners_p should return a bool. This patch makes this change. I'm checking it in. 2022-06-03 Alan Modra asan: heap buffer overflow in _bfd_mips_elf_section_from_shdr * elfxx-mips.c (_bfd_mips_elf_section_from_shdr): Sanity check intopt.size and remaining bytes in section for reginfo. 2022-06-03 Alan Modra Re: ubsan: undefined shift in frag_align_code This one needs the same fix too. * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Avoid signed integer overflow. 2022-06-03 Tom de Vries [gdb] Fix warning in foreach_arch selftests When running the selftests, I run into: ... $ gdb -q -batch -ex "maint selftest" ... Running selftest execute_cfa_program::aarch64:ilp32. warning: A handler for the OS ABI "GNU/Linux" is not built into this configuration of GDB. Attempting to continue with the default aarch64:ilp32 settings. ... and likewise for execute_cfa_program::i8086 and execute_cfa_program::ia64-elf32. The warning can easily be reproduced outside the selftests by doing: ... $ gdb -q -batch -ex "set arch aarch64:ilp32" ... and can be prevented by first doing "set osabi none". Fix the warning by setting osabi to none while doing selftests that iterate over all architectures. This causes a regression in the print_one_insn selftests for the ARC architecture. The problem is pre-existing, and can be demonstrated (already without this patch) using: ... $ gdb -q -batch -ex "set osabi none" -ex "maint selftest print_one_insn::A6" Running selftest print_one_insn::A6. Self test failed: Cannot access memory at address 0x0 Ran 1 unit tests, 1 failed $ ... For ARC, we use the generic case in print_one_insn_test, containing this code: ... int kind = gdbarch_breakpoint_kind_from_pc (gdbarch, &pc); ... insn = gdbarch_sw_breakpoint_from_kind (gdbarch, kind, &bplen); ... The problem is that with osabi linux we trigger: ... static int arc_linux_breakpoint_kind_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr) { return trap_size; } ... but with osabi none: ... arc_breakpoint_kind_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr) { size_t length_with_limm = gdb_insn_length (gdbarch, *pcptr); ... which needs access to memory, and will consequently fail. Fix this in print_one_insn_test, in the default case, by iterating over supported osabi's to makes sure we trigger arc_linux_breakpoint_kind_from_pc which will give us a usable instruction to disassemble. Tested on x86_64-linux. 2022-06-03 Tom de Vries Revert "[gdb] Fix warning in foreach_arch selftests" This reverts commit fc18b1c5afd ("[gdb] Fix warning in foreach_arch selftests"). The commit introduced regressions for an --enable-targets=all build: ... Running selftest print_one_insn::A6.^M Self test failed: Cannot access memory at address 0x0^M ... and while investigating those I realized that the commit fc18b1c5afd complicates things by trying to set the current osabi. So, revert the patch in preparation for a simpler solution. Tested on x86_64-linux. 2022-06-03 Jan Beulich x86: exclude certain ISA extensions from v3/v4 ISA Like TBM and LWP, XOP and FMA4 also shouldn't be included in v3. Like AVX512-4VNNIW, AVX512-4FMAPS also shouldn't be included in v4. 2022-06-03 Roland McGrath gdb: LoongArch: Remove nonportable #include Don't use gregset.h in *-tdep.c since it's not usable on hosts that don't have . It's not needed by this file, and should only be needed by *-nat.c files. 2022-06-03 Alan Modra Re: asan: mips_gprel_reloc segfault Similarly for the elf mips support. * elf32-mips.c (mips_elf_final_gp): Don't segfault on symbols in any of the bfd_is_const_section sections. * elf64-mips.c (mips_elf64_final_gp): Likewise. * elfn32-mips.c (mips_elf_final_gp): Likewise. 2022-06-03 Alan Modra asan: mips_gprel_reloc segfault Not just the undefined section has a NULL owner, the absolute section has too. Which means we can't find output_bfd for __gp. Also, may as well test directly for output_bfd == NULL. * coff-mips.c (mips_gprel_reloc): Don't segfault on any of bfd_is_const_section sections. 2022-06-03 GDB Administrator Automatic date update in version.in 2022-06-02 Tom de Vries [gdb/testsuite] Detect change instead of init in gdb.mi/mi-var-block.exp On openSUSE Tumbleweed with target board unix/-m32, I run into: ... PASS: gdb.mi/mi-var-block.exp: step at do_block_test 2 Expecting: ^(-var-update \*[^M ]+)?(\^done,changelist=\[{name="foo",in_scope="true",type_changed="false",has_more="0"}, {name="cb",in_scope="true",type_changed="false",has_more="0"}\][^M ]+[(]gdb[)] ^M [ ]*) -var-update *^M ^done,changelist=[{name="foo",in_scope="true",type_changed="false",has_more="0"}]^M (gdb) ^M FAIL: gdb.mi/mi-var-block.exp: update all vars: cb foo changed (unexpected output) ... The problem is that the test-case attempts to detect a change in the cb variable caused by this initialization: ... void do_block_tests () { int cb = 12; ... but that only works if the stack location happens to be unequal to 12 before the initialization. Fix this by first initializing to 0, and then changing the value to 12: ... - int cb = 12; + int cb = 0; + cb = 12; ... and detecting that change. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29195 2022-06-02 Eli Zaretskii Rearrange and slightly reword the "Location Specification" section This rearranges and changes the wording of the "Location Specification" section of the GDB manual in minor ways. 2022-06-02 Tom Tromey ODR warning for "main" "main" is redeclared with a different type in maint.c. I think this might have come from my first gdb patch, many many years ago. While I wonder if this profiling code is actually useful at all any more, in the meantime it's simple to fix the declaration. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395 2022-06-02 Tom Tromey ODR warnings for "struct coff_symbol" "struct coff_symbol" is defined in multiple .c files, causing ODR warnings. This patch renames just the xcoffread.c type. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395 2022-06-02 Tom Tromey ODR warnings for "struct insn_decode_record_t" "struct insn_decode_record_t" is defined in multiple .c files, causing ODR warnings. This patch renames the types, and removes the use of "typedef" here -- this is a C-ism that's no longer needed. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395 2022-06-02 Tom Tromey ODR warnings for "struct insn_info" "struct insn_info" is defined in multiple .c files, causing ODR warnings. This patch renames the type in z80-tdep.c, leaving the other one alone. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395 2022-06-02 Tom Tromey ODR warnings from overlay constants Some overlay-related constants are duplicated in z80-tdep.c, causing ODR warnings. This patch renames just the z80-specific ones. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395 2022-06-02 Tom Tromey ODR warning for "enum string_repr_result" "enum string_repr_result" is defined in multiple .c files, causing ODR warnings. This patch renames the types. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395 2022-06-02 Tom Tromey ODR warning for "struct find_targ_sec_arg" "struct find_targ_sec_arg" is defined in multiple .c files, causing ODR warnings. This patch renames the types. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395 2022-06-02 Tom Tromey ODR warning for "struct stack_item" "struct stack_item" is defined in multiple .c files, causing ODR warnings. This patch renames these types. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395 2022-06-02 Tom Tromey ODR warning for "struct instruction_type" "struct instruction_type" is defined in multiple .c files, causing an ODR warning. This patch renames the types. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395 2022-06-02 Tom Tromey ODR warning for struct ext_link_map This renames the solib-dsbt.c copy of "struct ext_link_map" to avoid an ODR warning. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395 2022-06-02 Tom Tromey ODR warning for struct field_info This renames one of the instance of "struct field_info" to avoid an ODR warning. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395 2022-06-02 Tom Tromey ODR warnings for struct nextfield "struct nextfield" is defined in multiple places in GDB. This patch renames just the stabs one, leaving the DWARF one untouched. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395 2022-06-02 Tom Tromey ODR warnings for struct symloc "struct symloc" is defined in multiple spots in gdb, causing ODR warnings. This patch renames these. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395 2022-06-02 Tom Tromey Fix ODR warning in observable.h observable.h triggers an ODR warning because this line: extern observable target_changed; ... may be the only declaration of "struct target_ops" in scope (depending on the particular .c file) -- and this declares it in a namespace, resulting in confusion. This patch fixes the problem by adding a forward declaration. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395 2022-06-02 Tiezhu Yang gdb: LoongArch: Implement the software_single_step gdbarch method When execute the following command on LoongArch: make check-gdb TESTS="gdb.base/branch-to-self.exp" there exist the following failed testcases: FAIL: gdb.base/branch-to-self.exp: single-step: si (timeout) FAIL: gdb.base/branch-to-self.exp: break-cond: side=host: continue to breakpoint: continue to break (timeout) FAIL: gdb.base/branch-to-self.exp: break-cond: side=host: p counter (timeout) Implement the software_single_step gdbarch method to decode the current branch instruction and determine the address of the next instruction on LoongArch to fix the above failed testcases. 2022-06-02 Ilya Leoshkevich gdb: Do not add empty sections to the section map From: Ulrich Weigand build_objfile_section_table () creates four synthetic sections per objfile, which are collected by update_section_map () and passed to std::sort (). When there are a lot of objfiles, for example, when debugging JITs, the presence of these sections slows down the sorting significantly. The output of update_section_map () is used by find_pc_section (), which can never return any of these sections: their size is 0, so they cannot be accepted by bsearch_cmp (). Filter them (and all the other empty sections) out in insert_section_p (), which is used only by update_section_map (). 2022-06-02 Jon Turney Fix a new warning on Cygwin > ../../gdb/windows-nat.c: In function ‘windows_solib* windows_make_so(const char*, LPVOID)’: > ../../gdb/windows-nat.c:714:12: error: declaration of ‘char name [512]’ shadows a parameter [-Werror=shadow=compatible-local] > 714 | char name[SO_NAME_MAX_PATH_SIZE]; > | ^~~~ > ../../gdb/windows-nat.c:655:30: note: shadowed declaration is here > 655 | windows_make_so (const char *name, LPVOID load_addr) > | ~~~~~~~~~~~~^~~~ Fix Cygwin build after 85b25bd9 Fix Cygwin build after 85b25bd9 ("Simplify windows-nat.c solib handling"). Fix Cygwin build after 0578e87f Fix Cygwin build after 0578e87f ("Remove some globals from nat/windows-nat.c"). Update code under ifdef __CYGWIN__ for globals moved to members of struct windows_process_info. Fix Cygwin build after fcab5839 Fix Cygwin build after fcab5839 ("Implement pid_to_exec_file for Windows in gdbserver"). That change moves code from gdb/windows-nat.c to gdb/nat/windows-nat.c, but doesn't add the required typedefs and includes for parts of that code under ifdef __CYGWIN__. 2022-06-02 Alan Modra Re: ubsan: signed integer overflow in atof_generic Oops. * atof-generic.c: Include limits.h. 2022-06-02 Alan Modra ubsan: signed integer overflow in atof_generic Fix the signed overflows by using unsigned variables and detect overflow at BUG! comment. * atof-generic.c (atof_generic): Avoid signed integer overflow. Return ERROR_EXPONENT_OVERFLOW if exponent overflows a long. 2022-06-02 Alan Modra asan: uninit write _bfd_ecoff_write_object_contents * ecoff.c (_bfd_ecoff_write_object_contents): zalloc reloc_buff. asan: null deref in coff_write_relocs * coffcode.h (coff_write_relocs): Don't deref NULL howto. ubsan: undefined shift in frag_align_code * frags.c (MAX_MEM_FOR_RS_ALIGN_CODE): Avoid signed integer overflow. 2022-06-02 Alan Modra gas read_a_source_file #APP processing This fixes some horrible code using do_scrub_chars. What we had ran text through do_scrub_chars twice, directly in read_a_source_file and again via the input_scrub_include_sb call. That's silly, and since do_scrub_chars is a state machine, possibly wrong. More silliness is evident in the temporary malloc'd buffer for do_scrub_chars output, which should have been written directly to sbuf. So, get rid of the do_scrub_chars call and support functions, leaving scrubbing to input_scrub_include_sb. I did wonder about #NO_APP overlapping input_scrub_next_buffer buffers, but that should only happen if the string starts in one file and finishes in another. * read.c (scrub_string, scrub_string_end): Delete. (scrub_from_string): Delete. (read_a_source_file): Rewrite #APP processing. 2022-06-02 Alan Modra sb_scrub_and_add_sb not draining input string buffer It is possible for sb_scrub_and_add_sb to not consume all of the input string buffer. If this happens for reasons explained in the comment, do_scrub_chars can leave pointers to the string buffer for the next call. This patch fixes that by ensuring the input is drained. Note that the behaviour for an empty string buffer is also changed, avoiding another do_scrub_chars bug where empty input and single char sized output buffers could result in a write past the end of the output. sb.c (sb_scrub_and_add_sb): Loop until all of input sb is consumed. 2022-06-02 Alan Modra asan: heap buffer overflow in dwarf2_directive_filename Seen with .file 4294967289 "xxx.c" * dwarf2dbg.c (assign_file_to_slot): Catch more cases of integer overflow. Make param i an unsigned int. 2022-06-02 Alan Modra asan: NULL deref in scan_unit_for_symbols Since commit b43771b045 it has been possible to look up addresses that match a unit with errors, since ranges are added to a trie while the unit is being parsed. On error, parse_comp_unit leaves first_child_die_ptr NULL which results in a NULL info_ptr being passed to scan_unit_for_symbols. Fix this by setting unit->error. Also wrap some overlong lines, and fix some formatting errors. * dwarf2.c: Formatting. (parse_comp_unit): Set unit->error on err_exit path. 2022-06-02 GDB Administrator Automatic date update in version.in 2022-06-01 Tom de Vries [gdb] Fix warning in foreach_arch selftests When running the selftests, I run into: ... $ gdb -q -batch -ex "maint selftest" ... Running selftest execute_cfa_program::aarch64:ilp32. warning: A handler for the OS ABI "GNU/Linux" is not built into this configuration of GDB. Attempting to continue with the default aarch64:ilp32 settings. ... and likewise for execute_cfa_program::i8086 and execute_cfa_program::ia64-elf32. The warning can easily be reproduced outside the selftests by doing: ... $ gdb -q -batch -ex "set arch aarch64:ilp32" ... and can be prevented by first doing "set osabi none". Fix the warning by setting osabi to none while doing selftests that iterate over all architectures. Tested on x86_64-linux. 2022-06-01 Tom Tromey Add gdb.current_language and gdb.Frame.language This adds the gdb.current_language function, which can be used to find the current language without (1) ever having the value "auto" or (2) having to parse the output of "show language". It also adds the gdb.Frame.language, which can be used to find the language of a given frame. This is normally preferable if one has a Frame object handy. 2022-06-01 Yvan Roux [arm] Don't use special treatment for PC In an exception frame the PC register is extracted from the stack just like other base registers, so there is no need for a special treatment. [arm] Add support for FPU registers in prologue unwinder The prologue unwinder had support for FPU registers, but only to calculate the correct offset on the stack, the values were not saved. 2022-06-01 Yvan Roux [arm] d0..d15 are 64-bit each, not 32-bit When unwinding the stack, the floating point registers d0 to d15 need to be handled as double words, not words. Only the first 8 registers have been confirmed fixed with this patch on a STM32F407-DISC0 board, but the upper 8 registers on Cortex-M33 should be handled in the same way. The test consisted of running a program compiled with float-abi=hard. In the main function, a function taking a double as an argument was called. After the function call, a hardware timer was used to trigger an interrupt. In the debug session, a breakpoint was set in the function called from main to verify the content of the registers using "info float" and another breakpoint in the interrupt handler was used to check the same registers using "info float" on frame 2 (the frame just before the dummy frame created for the signal handler in gdb). 2022-06-01 Yvan Roux [arm] Cleanup: use hex for offsets Changed offset from decimal to hex to match architecture reference manual terminology and keep coherency with the rest of the code. 2022-06-01 Jiangshuai Li gdb:csky save fpu and vdsp info to struct csky_gdbarch_tdep First, add three variables fpu_abi, fpu_hardfp and vdsp_version to csky_gdbarch_tdep. They will be initialized from info.abfd in cskg_gdbarch_init. Now, they are just used to find a candidate among the list of pre-declared architectures Later, they will be used in gdbarch_return_value and gdbarch_push_dummy_call for funtions described below: fpu_abi: to check if the bfd is using VAL_CSKY_FPU_ABI_HARD or VAL_CSKY_FPU_ABI_SOFT fpu_hardfp: to check if the bfd is using VAL_CSKY_FPU_HARDFP_SINGLE or VAL_CSKY_FPU_HARDFP_DOUBLE vdsp_version: to check if a function is returned with CSKY_VRET_REGNUM 2022-06-01 Alan Modra Re: use libiberty xmalloc in bfd/doc/chew.c We can't use libiberty.a in chew. libiberty is a host library, chew a build program. Partly revert commit 7273d78f3f7a, instead define local versions of the libiberty functions. ansidecl.h also isn't needed. * doc/chew.c: Don't include libiberty.h or ansidecl.h. (xmalloc, xrealloc, xstrdup): New functions. * doc/local.mk (LIBIBERTY): Don't define or use. * Makefile.in: Regenerate. 2022-06-01 GDB Administrator Automatic date update in version.in 2022-06-01 H.J. Lu x86: Properly handle IFUNC function pointer reference Update commit 68c4956b1401de70173848a6bdf620cb42fa9358 Author: H.J. Lu Date: Tue Apr 26 09:08:54 2022 -0700 x86: Properly handle function pointer reference to properly handle IFUNC function pointer reference. Since IFUNC symbol value is only known at run-time, set pointer_equality_needed for IFUNC function pointer reference in PDE so that it will be resolved to its PLT entry directly. bfd/ PR ld/29216 * elf32-i386.c (elf_i386_scan_relocs): Set pointer_equality_needed for IFUNC function pointer reference in PDE. * elf64-x86-64.c (elf_x86_64_scan_relocs): Likewise. ld/ PR ld/29216 * testsuite/ld-ifunc/ifunc.exp: Run PR ld/29216 test. * testsuite/ld-ifunc/pr29216.c: New file. 2022-05-31 H.J. Lu i386: Ajdust more tests for opcodes/i386: remove trailing whitespace This fixes: FAIL: Build ifunc-1a with -z ibtplt FAIL: Build ifunc-1a with PIE -z ibtplt FAIL: Build libno-plt-1b.so FAIL: No PLT (dynamic 1a) FAIL: No PLT (dynamic 1b) FAIL: No PLT (dynamic 1c) FAIL: No PLT (static 1d) FAIL: No PLT (PIE 1e) FAIL: No PLT (PIE 1f) FAIL: No PLT (PIE 1g) FAIL: No PLT (dynamic 1h) FAIL: No PLT (dynamic 1i) FAIL: No PLT (static 1j) * ld-i386/libno-plt-1b.dd: Remove trailing whitespaces. * ld-i386/no-plt-1a.dd: Likewise. * ld-i386/no-plt-1b.dd: Likewise. * ld-i386/no-plt-1c.dd: Likewise. * ld-i386/no-plt-1d.dd: Likewise. * ld-i386/no-plt-1e.dd: Likewise. * ld-i386/no-plt-1f.dd: Likewise. * ld-i386/no-plt-1g.dd: Likewise. * ld-i386/no-plt-1h.dd: Likewise. * ld-i386/no-plt-1i.dd: Likewise. * ld-i386/no-plt-1j.dd: Likewise. * ld-i386/plt-main-ibt.dd: Likewise. * ld-i386/plt-pie-ibt.dd: Likewise. 2022-05-31 Tom Tromey Use unique_ptr for objfiles A while back, I changed objfiles to be held via a shared_ptr. The idea at the time was that this was a step toward writing to the index cache in the background, and this would let gdb keep a reference alive to do so. However, since then we've rewritten the DWARF reader, and the new index can do this without requiring a shared pointer -- in fact there are patches pending to implement this. This patch switches objfile management to unique_ptr, which makes more sense now. Regression tested on x86-64 Fedora 34. 2022-05-31 Nils-Christian Kempke gdb/testsuite: fixup common-block.exp for intel compilers The order in which the variables in info common and info locals are displayed is compiler (and dwarf) dependent. While all symbols should be displayed the order is not fixed. I added a gdb_test_multiple that lets ifx and ifort pass in cases where only the order differs. 2022-05-31 Nils-Christian Kempke gdb, testsuite, fortran: fixup mixed-lang-stack for Intel/LLVM compilers When value-printing a pointer within GDB by default GDB will look for defined symbols residing at the address of the pointer. For the given test the Intel/LLVM compiler stacks both display a symbol associated with a printed pointer while the gnu stack does not. This leads to failures in the test when running the test with CC_FOR_TARGET='clang' CXX_FOR_TARGET='clang' F90_FOR_TARGET='flang'" (gdb) b 37 (gdb) r (gdb) f 6 (gdb) info args a = 1 b = 2 c = 3 d = 4 + 5i f = 0x419ed0 "abcdef" g = 0x4041a0 <.BSS4> or CC_FOR_TARGET='icx' CXX_FOR_TARGET='icpx' F90_FOR_TARGET='ifx'" (gdb) b 37 (gdb) r (gdb) f 6 (gdb) info args a = 1 b = 2 c = 3 d = 4 + 5i f = 0x52eee0 "abcdef" g = 0x4ca210 For the compiled binary the Intel/LLVM compilers both decide to move the local variable g into the .bss section of their executable. The gnu stack will keep the variable locally on the stack and not define a symbol for it. Since the behavior for Intel/LLVM is actually expected I adapted the testcase at this point to be a bit more allowing for other outputs. I added the optional "" to the regex testing for g. The given changes reduce the test fails for Intel/LLVM stack by 4 each. 2022-05-31 Nils-Christian Kempke gdb, testsuite, fortran: fix double free in mixed-lang-stack.exp While testing mixed-lang-stack I realized that valgrind actually complained about a double free in the test. All done ==2503051== ==2503051== HEAP SUMMARY: ==2503051== in use at exit: 0 bytes in 0 blocks ==2503051== total heap usage: 26 allocs, 27 frees, 87,343 bytes allocated ==2503051== ==2503051== All heap blocks were freed -- no leaks are possible ==2503051== ==2503051== For lists of detected and suppressed errors, rerun with: -s ==2503051== ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 0 from 0) Reason for this is that in mixed-lang-stack.cpp in mixed_func_1f an object "derived_type obj" goes on the stack which is then passed-by-value (so copied) to mixed_func_1g. The default copy-ctor will be called but, since derived_type contains a heap allocated string and the copy constructor is not implemented it will only be able to shallow copy the object. Right after each of the functions the object gets freed - on the other hand the d'tor of derived_type actually is implemented and calls free on the heap allocated string which leads to a double free. Instead of obeying the rule of 3/5 I just got rid of all that since it does not serve the test. The string is now just a const char* = ".." object member. 2022-05-31 Nils-Christian Kempke testsuite, fortran: allow additional completions in module.exp For ifort, ifx, and flang the tests "complete modm" and "complete modmany" fail. This is because all three emit additional completion suggestions. These additional suggestions have their origin in symbols emitted by the compilers which can also be completed from the respective incomplete word (modm or modmany). For this specific example gfortran does not emit any additional symbols. For example, in this test the linkage name for var_a in ifx is "modmany_mp_var_a_" while gfortran uses "__modmany_MOD_var_a" instead. Since modmany_mp_var_a can be completed from modm and also modmany they will get displayed, while gfortran's symbol starts with "__" and thus will be ignored (it cannot be a completion of a word starting with "m"). Similar things happen in flang and ifort. Some example output is shown below: FLANG (gdb) complete p modm p modmany p modmany::var_a p modmany::var_b p modmany::var_c p modmany::var_i p modmany_ IFX/IFORT (gdb) complete p modm p modmany p modmany._ p modmany::var_a p modmany::var_b p modmany::var_c p modmany::var_i p modmany_mp_var_a_ p modmany_mp_var_b_ p modmany_mp_var_c_ p modmany_mp_var_i_ GFORTRAN (gdb) complete p modm p modmany p modmany::var_a p modmany::var_b p modmany::var_c p modmany::var_i I want to emphasize: for Fortran (and also C/C++) the complete command does not actually check whether its suggestions make sense - all it does is look for any symbol (in the minimal symbols, partial symbols etc.) that a given substring can be completed to (meaning that the given substring is the beginning of the symbol). One can easily produce a similar output for the gfortran compiled executable. For this look at the slightly modified "complete p mod" in gfortran: (gdb) complete p mod p mod1 p mod1::var_const ... p mod_1.c p modcounter p mode_t p modf ... p modify_ldt p modmany p modmany::var_a p modmany::var_b p modmany::var_c p modmany::var_i p module p module.f90 p module_entry p moduse p moduse::var_x p moduse::var_y Many of the displayed symbols do not actually work with print: (gdb) p mode_t Attempt to use a type name as an expression (gdb) p mod_1.c No symbol "mod_1" in current context. (gdb) I think that in the given test the output for gfortran only looks nice "by chance" rather than is actually expected. Expected is any output that also contains the completions p modmany p modmany::var_a p modmany::var_b p modmany::var_c p modmany::var_i while anythings else can be displayed as well (depending on the compiler and its emitted symbols). This, I'd consider all three outputs as valid and expected - one is just somewhat lucky that gfortran does not produce any additional symbols that got matched. The given patch improves test performance for all three compilers by allowing additional suggested completions inbetween and after the two given blocks in the test. I did not allow additional print within the modmany_list block since the output is ordered alphabetically and there should normally not appear any additional symbols there. For flang/ifx/ifort I each see 2 failures less (which are exactly the two complete tests). As a side note and since I mentioned C++ in the beginning: I also tried the gdb.cp/completion.exp. The output seems a bit more reasonable, mainly since C++ actually has a demangler in place and linkage symbols do not appear in the output of complete. Still, with a poor enough to-be-completed string one can easily produce similar results: (gdb) complete p t ... p typeinfo name for void p typeinfo name for void const* p typeinfo name for void* p typeinfo name for wchar_t p typeinfo name for wchar_t const* p typeinfo name for wchar_t* p t *** List may be truncated, max-completions reached. *** (gdb) p typeinfo name for void* No symbol "typeinfo" in current context. (gdb) complete p B p BACK_SLASH p BUF_FIRST p BUF_LAST ... p Base p Base::Base() p Base::get_foo() p bad_key_err p buf p buffer p buffer_size p buflen p bufsize p build_charclass.isra (gdb) p bad_key_err No symbol "bad_key_err" in current context. (compiled with gcc/g++ and breaking at main). This patch is only about making the referenced test more 'fair' for the other compilers. Generally, I find the behavior of complete a bit confusing and maybe one wants to change this at some point but this would be a bigger task. 2022-05-31 Nils-Christian Kempke testsuite, fortran: fix info-types for intel compilers This info-types.exp test case had a few issues that this patch fixes. First, the emitted symbol character(kind=1)/character*1 (different compilers use different naming converntions here) which is checkedin the test is not actually expected given the test program. There is no variable of that type in the test. Still, gfortran emits it for every Fortran program there is. The reason is the way gfortran handles Fortran's named main program. It generates a wrapper around the Fortran program that is quite similar to a C main function. This C-like wrapper has argc and argv arguments for command line argument passing and the argv pointer type has a base type character(kind=1) DIE emitted at CU scope. Given the program program prog end program prog the degbug info gfortran emits looks somewhat like <0>: Abbrev Number: 3 (DW_TAG_compile_unit) ... <1><2f>: Abbrev Number: 4 (DW_TAG_subprogram) <30> DW_AT_external : 1 <30> DW_AT_name : (indirect string, ...): main ... <2><51>: Abbrev Number: 1 (DW_TAG_formal_parameter) <52> DW_AT_name : (indirect string, ...): argc ... <2><5d>: Abbrev Number: 1 (DW_TAG_formal_parameter) <5e> DW_AT_name : (indirect string, ...): argv ... <62> DW_AT_type : <0x77> ... <2><6a>: Abbrev Number: 0 ... <1><77>: Abbrev Number: 6 (DW_TAG_pointer_type) <78> DW_AT_byte_size : 8 <79> DW_AT_type : <0x7d> <1><7d>: Abbrev Number: 2 (DW_TAG_base_type) <7e> DW_AT_byte_size : 1 <7f> DW_AT_encoding : 8 (unsigned char) <80> DW_AT_name : (indirect string, ...): character(kind=1) <1><84>: Abbrev Number: 7 (DW_TAG_subprogram) <85> DW_AT_name : (indirect string, ...): prog ... Ifx and flang do not emit any debug info for a wrapper main method so the type is missing here. There was the possibility of actually adding a character*1 type variable to the Fortran executable, but both, ifx and gfortran chose to emit this variable's type as a DW_TAG_string_type of length one (instead of a character(kind=1), or whatever the respective compiler naming convention is). While string types are printed as character*LENGHT in the fortran language part (e.g. when issuing a 'ptype') they do not generate any symbols inside GDB. In read.c it says /* These dies have a type, but processing them does not create a symbol or recurse to process the children. Therefore we can read them on-demand through read_type_die. */ So they did not add any output to 'info types'. Only flang did emit a character type here. As adding a type would have a) not solved the problem for ifx and would have b) somehow hidden the curious behavior of gfortran, instead, the check for this character type was chagened to optional with the check_optional_entry to allow for the symbols's absence and to allow flang and ifx to pass this test as well. Second, the line checked for s1 was hardcoded as 37 in the test. Given that the type is actually defined on line 41 (which is what is emitted by ifx) it even seems wrong. The line check for s1 was changed to actually check for 41 and a gfortran bug has been filed here https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105454 The test is now marked as xfail for gfortran. Third, the whole test of checking for the 'Type s1' in info types seemed questionable. The type s1 is declared iside the scope of the Fortran program info_types_test. Its DIE however is emitted as a child of the whole compilation unit making it visible outside of the program's scope. The 'info types' command checks for types stored in the GLOBAL_BLOCK, or STATIC_BLOCKm wgucm according to block.h The GLOBAL_BLOCK contains all the symbols defined in this compilation whose scope is the entire program linked together. The STATIC_BLOCK contains all the symbols whose scope is the entire compilation excluding other separate compilations. so for gfortran, the type shows up in the output of 'info types'. For flang and ifx on the other hand this is not the case. The two compilers emit the type (correctly) as a child of the Fortran program, thus not adding it to either, the GLOBAL_BLOCK nor the LOCAL_BLOCK. A bug has been opened for the gfortran scoping issue: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105454 While the most correct change might have been removing the check for s1, the change made here was to only check for this type in case of gfortran being used as the compiler, as this check also covers the declaration line issue mentioned above. A comment was added to maybe remove this check once the scoping issue is resolved (and it starts to fail with newer gfortran versions). The one used to test these changes was 13.0. 2022-05-31 Nils-Christian Kempke testsuite/lib: add check_optional_entry for GDBInfoSymbols There was already a similar functionality for the GDBInfoModuleSymbols. This just extends the GDBInfoSymbols. We will use this feature in a later commit to make a testcase less GNU specific and more flexible for other compilers. Namely, in gdb.fortran/info-types.exp currenlty GDBInfoSymbols::check_entry is used to verify and test the output of the info symbols command. The test, however was written with gfortran as a basis and some of the tests are not fair with e.g. ifx and ifort as they test for symbols that are not actually required to be emitted. The lines GDBInfoSymbols::check_entry "${srcfile}" "" "${character1}" and GDBInfoSymbols::check_entry "${srcfile}" "37" "Type s1;" check for types that are either not used in the source file (character1) or should not be emitted by the compiler at global scope (s1) thus no appearing in the info symbols command. In order to fix this we will later use the newly introduced check_optional_entry over check_entry. 2022-05-31 Nils-Christian Kempke testsuite, fortran: Add '-debug-parameters all' when using ifx/ifort In order for ifx and ifort to emit all debug entries, even for unused parameters in modules we have to define the '-debug-parameters all' flag. This commit adds it to the ifx-*/ifort-* specific flags in gdb.exp. 2022-05-31 Nils-Christian Kempke testsuite, fortran: add compiler dependent types to dynamic-ptype-whatis The test was earlier not using the compiler dependent type print system in fortran.exp. I changed this. It should generally improve the test performance for different compilers. For ifx and gfortran I do not see any failures. 2022-05-31 Nils-Christian Kempke testsuite, fortran: add required external keyword Currenlty, ifx/ifort cannot compile the given executable as it is not valid Fortran. It is missing the external keyword on the no_arg_subroutine. Gfortran compiles the example but this is actually a bug and there is an open gcc ticket for this here: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=50377 Adding the keyword does not change the gfortran compiling of the example. It will, however, prevent a future fail once 50377 has been addressed. 2022-05-31 Nils-Christian Kempke gdb/testsuite: disable charset.exp for intel compilers The test specifically tests for the Fortran CHARACTER(KIND=4) which is not available in ifx/ifort. Since the other characters are also printed elsewhere, we disable this test for the unsupported compilers. 2022-05-31 Nils-Christian Kempke gdb/testsuite: rename intel next gen c/cpp compilers The name for icx and icpx in the testsuite was earlier set to 'intel-*' by the compiler identification. This commit changes this to 'icx-*'. Note, that currently these names are not used within the testsuite so no tests have to be adapted here. 2022-05-31 Cristian Sandu Nils-Christian Kempke gdb/testsuite: add Fortran compiler identification to GDB This commit adds a separate Fortran compiler identification mechanism to the testsuite, similar to the existing one for C/C++. Before this change, the options and version for the Fortran compiler specified when running the testsuite with F90_FOR_TARGET set, was detected via its respective C compiler. So running the testsuite as make check TEST=gdb.fortran/*.exp CC_FOR_TARGET=gcc F90_FOR_TARGET=ifx or even make check TEST=gdb.fortran/*.exp F90_FOR_TARGET=ifx would use the gcc compiler inside the procedures get_compiler_info and test_compiler_info to identify compiler flags and the compiler version. This could sometimes lead to unpredictable outputs. It also limited testsuite execution to combinations where C and Fortran compiler would come from the same family of compiers (gcc/gfortran, icc/ifort, icx/ifx, clang/flang ..). This commit enables GDB to detect C and Fortran compilers independently of each other. As most/nearly all Fortran compilers have a mechanism for preprocessing files in a C like fashion we added the exact same meachnism that already existed for C/CXX. We let GDB preprocess a file with the compilers Fortran preprocessor and evaluate the preprocessor defined macros in that file. This enables GDB to properly run heterogeneous combinations of C and Fortran compilers such as CC_FOR_TARGET='gcc' and F90_FOR_TARGET='ifort' or enables one to run the testsuite without specifying a C compiler as in make check TESTS=gdb.fortran/*.exp F90_FOR_TARGET='ifx' make check TESTS=gdb.fortran/*.exp F90_FOR_TARGET='flang' On the other hand this also requires one to always specify a identification mechanism for Fortran compilers in the compiler.F90 file. We added identification for GFORTRAN, FLANG (CLASSIC and LLVM) IFX, IFORT, and ARMFLANG for now. Classic and LLVM flang were each tested with their latest releases on their respective release pages. Both get recognized by the new compiler identification and we introduced the two names flang-classic and flang-llvm to distinguish the two. While LLVM flang is not quite mature enough yet for running the testsuite we still thought it would be a good idea to include it already. For this we added a case for the fortran_main procedure. LLVM flang uses 'MAIN__' as opposed to classic flang which uses 'MAIN_' here. We did not have the possibility to test ARMFLANG - the versioning scheme here was extracted from its latest online documentation. We changed the test_compiler_info procedure to take another optional argument, the language string, which will be passed though to the get_compiler_info procedure. Passing 'f90' or 'c++' here will then trigger the C++/Fortran compiler identification within get_compiler_info. The latter procedure was extended to also handle the 'f90' argument (similarly to the already existing 'c++' one). 2022-05-31 Nils-Christian Kempke gdb/testsuite: move getting_compiler_info to front of gdb_compile The procedure gdb_compile queries its options via [lsearch -exact $options getting_compiler_info] to check whether or not it was called in with the option getting_compiler_info. If it was called with this option it would preprocess some test input to try and figure out the actual compiler version of the compiler used. While doing this we cannot again try to figure out the current compiler version via the 'getting_compiler_info' option as this would cause infinite recursion. As some parts of the procedure do recursively test for the compiler version to e.g. set certain flags, at several places gdb_compile there are checks for the getting_compiler_info option needed. In the procedure, there was already a variable 'getting_compiler_info' which was set to the result of the 'lsearch' query and used instead of again and again looking for getting_compiler_info in the procedure options. But, this variable was actually set too late within the code. This lead to a mixture of querying 'getting_compiler_info' or doing an lserach on the options passed to the procedure. I found this inconsistent and instead moved the variable getting_compiler_info to the front of the procedure. It is set to true or false depending on whether or not the argument is found in the procedure's options (just as before) and queried instead of doing an lsearch on the procedure options in the rest of the procedure. 2022-05-31 Felix Willgerodt Abdul Basit Ijaz Nils-Christian Kempke gdb/testsuite: Fix fortran types for Intel compilers. Newer Intel compilers emit their dwarf type name in a slightly different format. Therefore, this needs adjustment to make more tests pass in the Fortran testsuite. 2022-05-31 Abdul Basit Ijaz gdb/testsuite: Use -module option for Intel Fortran compilers The '-J' option is not supported in Intel compilers (ifx and ifort). The Intel version of the flag is '-module' which serves the same purpose. 2022-05-31 Nils-Christian Kempke gdb/testsuite: remove F77_FOR_TARGET support The last uses of the F77_FOR_TARGET via passing f77 to GDB's compile procedure were removed in this commit commit 0ecee54cfd04a60e7ca61ae07c72b20e21390257 Author: Tom Tromey Date: Wed Jun 29 17:50:47 2011 +0000 over 10 years ago. The last .f files in the testsuite by now are all being compiled by passing 'f90' to the GDB compile, thus only actually using F90_FOR_TARGET (array-element.f, block-data.f, subarray.f). Gfortran in this case is backwards compatible with most f77 code as claimed on gcc.gnu.org/fortran. The reason we'd like to get rid of this now is, that we'll be implementing a Fortran compiler identification mechanism, similar to the C/Cpp existing ones. It would be using the Fortran preprocessor macro defines to identify the Fortran compiler version at hand. We found it inconsequent to only implement this for f90 but, on the other hand, f77 seems deprecated. So, with this commit we remove the remaining lines for its support. 2022-05-31 Pedro Alves Improve clear command's documentation Co-Authored-By: Eli Zaretskii Change-Id: I9440052fd28f795d6f7c93a4576beadd21f28885 2022-05-31 Pedro Alves Clarify why we unit test matching symbol names with 0xff characters In the name matching unit tests in gdb/dwarf2/read.c, explain better why we test symbols with \377 / 0xff characters (Latin1 'ÿ'). Change-Id: I517f13adfff2e4d3cd783fec1d744e2b26e18b8e 2022-05-31 Pedro Alves Improve break-range's documentation Change-Id: Iac26e1d2e7d8dc8a7d9516e6bdcc5c3fc4af45c8 Explicitly mention yet-unloaded shared libraries in location spec examples Change-Id: I05639ddb3bf620c7297b57ed286adc3aa926b7b6 2022-05-31 Alan Modra sparc64 segfault in finish_dynamic_symbol SYMBOL_REFERENCES_LOCAL can return true for undefined symbols. This can result in a segfault when running sparc64 ld/testsuite/ld-vsb tests that expect a failure. * elfxx-sparc.c (_bfd_sparc_elf_finish_dynamic_symbol): Don't access u.def.section on non-default visibility undefined symbol. 2022-05-31 Alan Modra ia64 gas: Remove unnecessary init The whole struct is cleared by alloc_record. * config/tc-ia64.c (output_prologue, output_prologue_gr): Don't zero r.record.r.mask. 2022-05-31 Alan Modra v850_elf_set_note prototype v850_elf_set_note is declared using an unsigned int note param in elf32-v850.h but defined with enum c850_notes note in elf32-v850.c. Current mainline gcc is warning about this. Huh. * elf32-v850.c (v850_elf_set_note): Make "note" param an unsigned int. 2022-05-31 Alan Modra Import libiberty from gcc PR 29200 include/ * ansidecl.h, * demangle.h: Import from gcc. libiberty/ * cp-demangle.c, * testsuite/demangle-expected: Import from gcc. 2022-05-31 Andrew Burgess gdb/testsuite: resolve duplicate test name in gdb.trace/signal.exp Spotted a duplicate test name in gdb.trace/signal.exp, resolved in this commit by making use of 'with_test_prefix'. 2022-05-31 Alan Modra Ajdust more tests for opcodes/i386: remove trailing whitespace git commit 202be274a4 also missed adjusting a few testsuite files. This fixes i686-vxworks +FAIL: VxWorks shared library test 1 i686-vxworks +FAIL: VxWorks executable test 1 (dynamic) 2022-05-31 Alan Modra Trailing spaces in objdump -r header git commit 202be274a4 went a little wild in removing trailing spaces in gas/testsuite/gas/i386/{secidx.d,secrel.d}, causing x86_64-w64-mingw32 +FAIL: i386 secrel reloc x86_64-w64-mingw32 +FAIL: i386 secidx reloc I could have just replaced the trailing space, but let's fix the objdump output instead. Touches lots of testsuite files. 2022-05-31 GDB Administrator Automatic date update in version.in 2022-05-30 Simon Marchi gdb/testsuite: fix gdb.trace/signal.exp on x86 Patch 202be274a41a ("opcodes/i386: remove trailing whitespace from insns with zero operands") causes this regression: FAIL: gdb.trace/signal.exp: find syscall insn in kill It's because the test still expects to match a whitespace after the instruction, which the patch mentioned above removed. Remove the whitespaces for the regexp. Change-Id: Ie194273cc942bfd91332d4035f6eec55b7d3a428 2022-05-30 Pedro Alves gdb/manual: Introduce location specs The current "Specify Location" section of the GDB manual starts with: "Several @value{GDBN} commands accept arguments that specify a location of your program's code." And then, such commands are documented as taking a "location" argument. For example, here's a representative subset: @item break @var{location} @item clear @var{location} @item until @var{location} @item list @var{location} @item edit @var{location} @itemx info line @var{location} @item info macros @var{location} @item trace @var{location} @item info scope @var{location} @item maint agent @r{[}-at @var{location}@r{,}@r{]} @var{expression} The issue here is that "location" isn't really correct for most of these commands. Instead, the "location" argument is really a placeholder that represent an umbrella term for all of the "linespecs", "explicit location", and "address location" input formats. GDB parses these and then finds the actual code locations (plural) in the program that match. For example, a "location" specified like "-function func" will actually match all the code locations in the program that correspond to the address/file/lineno of all the functions named "func" in all the loaded programs and shared libraries of all the inferiors. A location specified like "-function func -label lab" matches all the addresses of C labels named "lab" in all functions named "func". Etc. This means that several of the commands that claim they accept a "location", actually end up working with multiple locations, and the manual doesn't explain that all that well. In some cases, the command will work with all the resolved locations. In other cases, the command aborts with an error if the location specification resolves to multiple locations in the program. In other cases, GDB just arbitrarily and silently picks whatever is the first resolved code location (which sounds like should be improved). To clarify this, I propose we use the term "Location Specification", with shorthand "locaction spec", when we're talking about the user input, the argument or arguments that is/are passed to commands to instruct GDB how to find locations of interest. This is distinct from the actual code locations in the program, which are what GDB finds based on the user-specified location spec. Then use "location specification or the shorter "location spec" thoughout instead of "location" when we're talking about the user input. Thus, this commit does the following: - renames the "Specify Location" section of the manual to "Location Specifications". - It then introduces the term "Location Specification", with corresponding shorthand "location spec", as something distinct from an actual code location in the program. It explains what a concrete code location is. It explains that a location specification may be incomplete, and that may match multiple code locations in the program, or no code location at all. It gives examples. Some pre-existing examples were moved from the "Set Breaks" section, and a few new ones that didn't exist yet were added. I think it is better to have these centralized in this "Location Specification" section, since all the other commands that accept a location spec have an xref that points there. - Goes through the manual, and where "@var{location}" was used for a command argument, updated it to say "@var{locspec}" instead. At the same time, tweaks the description of the affected commands to describe what happens when the location spec resolves to more than one location. Most commands just did not say anything about that. One command -- "maint agent -at @var{location}" -- currently says it accepts a "location", suggesting it can accept address and explicit locations too, but that's incorrect. In reality, it only accepts linespecs, so fix it accordingly. One MI command -- "-trace-find line" -- currently says it accepts a "line specification", but it can accept address and explicit locations too, so fix it accordingly. Special thanks goes to Eli Zaretskii for reviews and rewording suggestions. Change-Id: Ic42ad8565e79ca67bfebb22cbb4794ea816fd08b 2022-05-30 Luis Machado Move 64-bit BFD files from ALL_TARGET_OBS to ALL_64_TARGET_OBS Doing a 32-bit build with "--enable-targets=all --disable-sim" fails to link properly. -- loongarch-tdep.o: In function `loongarch_gdbarch_init': binutils-gdb/gdb/loongarch-tdep.c:443: undefined reference to `loongarch_r_normal_name' loongarch-tdep.o: In function `loongarch_fetch_instruction': binutils-gdb/gdb/loongarch-tdep.c:37: undefined reference to `loongarch_insn_length' loongarch-tdep.o: In function `loongarch_scan_prologue(gdbarch*, unsigned long long, unsigned long long, frame_info*, trad_frame_cache*) [clone .isra.4]': binutils-gdb/gdb/loongarch-tdep.c:87: undefined reference to `loongarch_insn_length' binutils-gdb/gdb/loongarch-tdep.c:88: undefined reference to `loongarch_decode_imm' binutils-gdb/gdb/loongarch-tdep.c:89: undefined reference to `loongarch_decode_imm' binutils-gdb/gdb/loongarch-tdep.c:90: undefined reference to `loongarch_decode_imm' binutils-gdb/gdb/loongarch-tdep.c:91: undefined reference to `loongarch_decode_imm' binutils-gdb/gdb/loongarch-tdep.c:92: undefined reference to `loongarch_decode_imm' -- Given the list of 64-bit BFD files in opcodes/Makefile.am:TARGET64_LIBOPCODES_CFILES, it looks like GDB's ALL_TARGET_OBS list is including files that should be included in ALL_64_TARGET_OBS instead. This patch accomplishes this and enables a 32-bit build with "--enable-targets=all --disable-sim" to complete. Moving the bpf, tilegx and loongarch files to the correct list means GDB can find the correct disassembler function instead of finding a null pointer. We still need the "--disable-sim" switch (or "--enable-64-bit-bfd") to make a 32-bit build with "--enable-targets=all" complete correctly 2022-05-30 Luis Machado Fix failing test for armeb-gnu-eabi The following test fails on the armeb-gnu-eabi target: FAIL: Unwind information for Armv8.1-M.Mainline PACBTI extension This patch adjusts the expected output for big endian. 2022-05-30 Alan Modra Use a union to avoid casts in bfd/doc/chew.c This fixes -Wpedantic warnings in chew.c. Conversion between function and object pointers is not guaranteed. They can even be different sizes, not that we're likely to encounter build machines like that nowadays. PR 29194 * doc/chew.c (pcu): New union typedef. (dict_type, pc): Use it here. Adjust uses of pc. (add_to_definition): Make "word" param a pcu. Adjust all uses of function. (stinst_type): Delete. 2022-05-30 Alan Modra use libiberty xmalloc in bfd/doc/chew.c Catch out of memory. * doc/chew.c: Include libibery.h. (init_string_with_size, nextword): Replace malloc with xmalloc. (newentry, add_to_definition): Likewise. (catchar, catbuf): Replace realloc with xrealloc. (add_intrinsic): Replace strdup with xstrdup. * doc/local.mk (LIBIBERTY): Define. (chew): Link against libiberty. * Makefile.in: Regenerate. 2022-05-30 Alan Modra Update K&R functions in bfd/doc/chew.c * doc/chew.c: Update function definitions to ISO C, remove now unnecessary prototypes. 2022-05-30 Alan Modra Reorganise bfd/doc/chew.c a little This also removes some unused variables, and deletes support for the "var" keyword which isn't used and was broken. (No means to set variables, and add_var used push_number inconsistent with its use elsewhere.) * doc/chew.c: Move typedefs before variables, variables before functions. (die): Move earlier. (word_type, sstack, ssp): Delete. (dict_type): Delete var field. (add_var): Delete. (compile): Remove "var" support. 2022-05-30 jiawei RISC-V: Add zhinx extension supports. The zhinx extension is a sub-extension in zfinx, corresponding to zfh extension but use GPRs instead of FPRs. This patch expanded the zfh insn class define, since zfh and zhinx use the same opcodes, thanks for Nelson's works. changelog in V2: Add missing classes of 'zfh' and 'zhinx' in "riscv_multi_subset_supports_ext". bfd/ChangeLog: * elfxx-riscv.c (riscv_multi_subset_supports): New extensions. (riscv_multi_subset_supports_ext): New extensions. gas/ChangeLog: * testsuite/gas/riscv/fp-zhinx-insns.d: New test. * testsuite/gas/riscv/fp-zhinx-insns.s: New test. include/ChangeLog: * opcode/riscv.h (enum riscv_insn_class): New INSN classes. opcodes/ChangeLog: * riscv-opc.c: Modify INSN_CLASS. 2022-05-30 GDB Administrator Automatic date update in version.in 2022-05-29 GDB Administrator Automatic date update in version.in 2022-05-28 Andrew Burgess gdb/python: improve formatting of help text for user defined commands Consider this command defined in Python (in the file test-cmd.py): class test_cmd (gdb.Command): """ This is the first line. Indented second line. This is the third line. """ def __init__ (self): super ().__init__ ("test-cmd", gdb.COMMAND_OBSCURE) def invoke (self, arg, from_tty): print ("In test-cmd") test_cmd() Now, within a GDB session: (gdb) source test-cmd.py (gdb) help test-cmd This is the first line. Indented second line. This is the third line. (gdb) I think there's three things wrong here: 1. The leading blank line, 2. The trailing blank line, and 3. Every line is indented from the left edge slightly. The problem of course, is that GDB is using the Python doc string verbatim as its help text. While the user has formatted the help text so that it appears clear within the .py file, this means that the text appear less well formatted when displayed in the "help" output. The same problem can be observed for gdb.Parameter objects in their set/show output. In this commit I aim to improve the "help" output for commands and parameters. To do this I have added gdbpy_fix_doc_string_indentation, a new function that rewrites the doc string text following the following rules: 1. Leading blank lines are removed, 2. Trailing blank lines are removed, and 3. Leading whitespace is removed in a "smart" way such that the relative indentation of lines is retained. With this commit in place the above example now looks like this: (gdb) source ~/tmp/test-cmd.py (gdb) help test-cmd This is the first line. Indented second line. This is the third line. (gdb) Which I think is much neater. Notice that the indentation of the second line is retained. Any blank lines within the help text (not leading or trailing) will be retained. I've added a NEWS entry to note that there has been a change in behaviour, but I didn't update the manual. The existing manual is suitably vague about how the doc string is used, so I think the new behaviour is covered just as well by the existing text. 2022-05-28 Andrew Burgess gdb: use gdb::unique_xmalloc_ptr for docs in cmdpy_init Make use of gdb::unique_xmalloc_ptr to hold the documentation string in cmdpy_init (when creating a custom GDB command in Python). I think this is all pretty straight forward, the only slight weirdness is the removal of the call to free toward the end of this function. Prior to this commit, if an exception was thrown after the GDB command was created then we would (I think) end up freeing the documentation string even though the command would remain registered with GDB, which would surely lead to undefined behaviour. After this commit we release the doc string at the point that we hand it over to the command creation routines. If we throw _after_ the command has been created within GDB then the doc string will be left live. If we throw during the command creation itself (either from add_prefix_cmd or add_cmd) then it is up to those functions to free the doc string (I suspect we don't, but I think in general the commands are pretty bad at cleaning up after themselves, so I don't think this is a huge problem). 2022-05-28 Vladimir Mezentsev gprofng: fix build with -mx32 gprofng/ChangeLog 2022-05-27 Vladimir Mezentsev PR gprofng/28983 PR gprofng/29143 * src/Experiment.cc (write_header): Fix argument for ctime. Fix -Wformat= warnings. * src/Dbe.cc: Likewise. * src/DwarfLib.h: Fix [-Wsign-compare] warnings. * src/Experiment.h: Likewise. * src/ipc.cc: Fix -Wformat= warnings. 2022-05-28 GDB Administrator Automatic date update in version.in 2022-05-27 Tom Tromey Fix crash with "maint print arc" Luis noticed that "maint print arc" would crash, because the command handler did not find "show" in the command name, violating an invariant. This patch fixes the bug by changing the registration to use add_basic_prefix_cmd instead. 2022-05-27 Andrew Burgess opcodes/i386: remove trailing whitespace from insns with zero operands While working on another patch[1] I had need to touch this code in i386-dis.c: ins->obufp = ins->mnemonicendp; for (i = strlen (ins->obuf) + prefix_length; i < 6; i++) oappend (ins, " "); oappend (ins, " "); (*ins->info->fprintf_styled_func) (ins->info->stream, dis_style_mnemonic, "%s", ins->obuf); What this code does is add whitespace after the instruction mnemonic and before the instruction operands. The problem I ran into when working on this code can be seen by assembling this input file: .text nop retq Now, when I disassemble, here's the output. I've replaced trailing whitespace with '_' so that the issue is clearer: Disassembly of section .text: 0000000000000000 <.text>: 0: 90 nop 1: c3 retq___ Notice that there's no trailing whitespace after 'nop', but there are three spaces after 'retq'! What happens is that instruction mnemonics are emitted into a buffer instr_info::obuf, then instr_info::mnemonicendp is setup to point to the '\0' character at the end of the mnemonic. When we emit the whitespace, this is then added starting at the mnemonicendp position. Lets consider 'retq', first the buffer is setup like this: 'r' 'e' 't' 'q' '\0' Then we add whitespace characters at the '\0', converting the buffer to this: 'r' 'e' 't' 'q' ' ' ' ' ' ' '\0' However, 'nop' is actually an alias for 'xchg %rax,%rax', so, initially, the buffer is setup like this: 'x' 'c' 'h' 'g' '\0' Then in NOP_Fixup we spot that we have an instruction that is an alias for 'nop', and adjust the buffer to this: 'n' 'o' 'p' '\0' '\0' The second '\0' is left over from the original buffer contents. However, when we rewrite the buffer, we don't afjust mnemonicendp, which still points at the second '\0' character. Now, when we insert whitespace we get: 'n' 'o' 'p' '\0' ' ' ' ' ' ' ' ' '\0' Notice the whitespace is inserted after the first '\0', so, when we print the buffer, the whitespace is not printed. The fix for this is pretty easy, I can change NOP_Fixup to adjust mnemonicendp, but now a bunch of tests start failing, we now produce whitespace after the 'nop', which the tests don't expect. So, I could update the tests to expect the whitespace.... ...except I'm not a fan of trailing whitespace, so I'd really rather not. Turns out, I can pretty easily update the whitespace emitting code to spot instructions that have zero operands and just not emit any whitespace in this case. So this is what I've done. I've left in the fix for NOP_Fixup, I think updating mnemonicendp is probably a good thing, though this is not really required any more. I've then updated all the tests that I saw failing to adjust the expected patterns to account for the change in whitespace. [1] https://sourceware.org/pipermail/binutils/2022-April/120610.html 2022-05-27 Alan Modra Replace bfd_hostptr_t with uintptr_t bfd_hostptr_t is defined as a type large enough to hold either a long or a pointer. It mostly appears in the coff backend code in casts. include/coff/internal.h struct internal_syment and union internal_auxent have the only uses in data structures, where comparison with include/coff/external.h and other code reveals that the type only needs to be large enough for a 32-bit integer or a pointer. That should mean replacing with uintptr_t is OK. Remove much of BFD_HOST configury This patch removes the definition of bfd_uint64_t and bfd_int64_t as well as most BFD_HOST_* which are now unused. Remove use of bfd_uint64_t and similar Requiring C99 means that uses of bfd_uint64_t can be replaced with uint64_t, and similarly for bfd_int64_t, BFD_HOST_U_64_BIT, and BFD_HOST_64_BIT. This patch does that, removes #ifdef BFD_HOST_* and tidies a few places that print 64-bit values. 2022-05-27 Vladimir Mezentsev gprofng: fix build with --disable-shared gprofng/ChangeLog 2022-05-26 Vladimir Mezentsev * libcollector/configure.ac: Use AC_MSG_WARN instead of AC_MSG_ERROR * libcollector/configure: Rebuild. 2022-05-27 Jan Beulich x86/Intel: allow MASM representation of embedded rounding / SAE MASM doesn't support the separate operand form; the modifier belongs after the instruction instead. Accept this form alongside the original (now legacy) one. Short of having access to a MASM version to actually check in how far "after the instruction" is a precise statement in their documentation, allow both that and the SDM mandated form where the modifier is on the last register operand (with a possible immediate operand following). Sadly the split out function, at least for the time being, needs to cast away constness at some point, as the two callers disagree in this regard. Adjust some, but not all of the testcases. 2022-05-27 Jan Beulich x86: re-work AVX512 embedded rounding / SAE As a preparatory step to allowing proper non-operand forms of specifying embedded rounding / SAE, convert the internal representation to non- operand form. While retaining properties (and in a few cases perhaps providing more meaningful diagnostics), this means doing away with a few hundred standalone templates, thus - as a nice side effect - reducing memory consumption / cache occupancy. x86/Intel: adjust representation of embedded rounding / SAE MASM doesn't consider {sae} and alike a separate operand; it is attached to the last register operand instead, just like spelled out by the SDM. Make the disassembler follow this first, before also adjusting the assembler (such that it'll be easy to see that the assembler change doesn't alter generated code). 2022-05-27 Jan Beulich x86/Intel: allow MASM representation of embedded broadcast MASM doesn't support the {1to} form; DWORD BCST (paralleling DWORD PTR) and alike are to be used there instead. Accept these forms alongside the original (now legacy) ones. Acceptance of the original {1to} operand suffix is retained both for backwards compatibility and to disambiguate VFPCLASSP{S,D,H} and vector conversions with shrinking element sizes. I have no insight (yet) into how MASM expects those to be disambiguated. Adjust some, but not all of the testcases. 2022-05-27 Jan Beulich x86/Intel: adjust representation of embedded broadcast MASM doesn't support the {1to} form; DWORD BCST (paralleling DWORD PTR) and alike are to be used there instead. Make the disassembler follow this first, before also adjusting the assembler (such that it'll be easy to see that the assembler change doesn't alter generated code). For VFPCLASSP{S,D,H} and vector conversions with shrinking element sizes the original {1to} operand suffix is retained, to disambiguate output. I have no insight (yet) into how MASM expects those to be disambiguated. 2022-05-27 Vladimir Mezentsev gprofng: fix build with -mx32 gprofng/ChangeLog 2022-05-26 Vladimir Mezentsev PR gprofng/28983 * libcollector/libcol_util.h (__collector_getsp, __collector_getfp, __collector_getpc): Adapt for build with -mx32 * libcollector/heaptrace.c: Fix -Wpointer-to-int-cast warnings. * libcollector/hwprofile.h: Likewise. * libcollector/mmaptrace.c: Likewise. * libcollector/synctrace.c: Likewise. * libcollector/unwind.c: Likewise. 2022-05-27 GDB Administrator Automatic date update in version.in 2022-05-27 Hans-Peter Nilsson ld: cris*-elf: Default to --no-warn-rwx-segment ld: configure.tgt (cris-*-*, crisv32-*-* sans *-aout and *-linux): Unless specified through the --enable-* -option, default to --no-warn-rwx-segment. Change-Id: I846bcd3e6762da807b17215a9fe337461ea0d710 2022-05-27 Hans-Peter Nilsson cris: bfd: Correct default to no execstack In the now-historical CRIS glibc port, the default stack permission was no-exec as in "#define DEFAULT_STACK_PERMS (PF_R|PF_W)", and the gcc port only emits the executable-stack marker when needed; when emitting code needing it. In other words, the binutils setting mismatches. It doesn't matter much, except being confusing and defaulting to "off" is more sane. ld: * testsuite/ld-elf/elf.exp (target_defaults_to_execstack): Switch to 0 for cris*-*-*. bfd: * elf32-cris.c (elf_backend_default_execstack): Define to 0. Change-Id: I52f37598f119b19111c7a6546c00a627fca0f396 2022-05-26 John Baldwin aarch64-fbsd-nat: Move definition of debug_regs_probed under HAVE_DBREG. This fixes the build on older FreeBSD systems without support for hardware breakpoints/watchpoints. 2022-05-26 Lancelot SIX gdb: Change psymbol_functions::require_partial_symbols to partial_symbols The previous patch ensured that partial symbols are read before calling most of the quick_function's methods. The psymbol_functions class has the require_partial_symbols method which serves this exact purpose, and does not need to do it anymore. This patch renames this method to partial_symbols and makes it an accessor which asserts that partial symbols have been read at this point. Regression tested on x86_64-linux. 2022-05-26 Lancelot SIX gdb: Require psymtab before calling quick_functions in objfile The recent DWARF indexer rewrite introduced a regression when debugging a forking program. Here is a way to reproduce the issue (there might be other ways, but one is enough and this one mimics the situation we encountered). Consider a program which forks, and the child loads a shared library and calls a function in this shared library: if (fork () == 0) { void *solib = dlopen (some_solib, RTLD_NOW); void (*foo) () = dlsym (some_solib, "foo"); foo (); } Suppose that this program is compiled without debug info, but the shared library it loads has debug info enabled. When debugging such program with the following options: - set detach-on-fork off - set follow-fork-mode child we see something like: (gdb) b foo Function "foo" not defined. Make breakpoint pending on future shared library load? (y or [n]) y Breakpoint 1 (foo) pending. (gdb) run Starting program: a.out [Attaching after process 19720 fork to child process 19723] [New inferior 2 (process 19723)] [Switching to process 19723] Thread 2.1 "a.out" hit Breakpoint 1, 0x00007ffff7fc3101 in foo () from .../libfoo.so (gdb) list Fatal signal: Segmentation fault ----- Backtrace ----- 0x55a278f77d76 gdb_internal_backtrace_1 ../../gdb/bt-utils.c:122 0x55a278f77f83 _Z22gdb_internal_backtracev ../../gdb/bt-utils.c:168 0x55a27940b83b handle_fatal_signal ../../gdb/event-top.c:914 0x55a27940bbb1 handle_sigsegv ../../gdb/event-top.c:987 0x7effec0343bf ??? /build/glibc-sMfBJT/glibc-2.31/nptl/../sysdeps/unix/sysv/linux/x86_64/sigaction.c:0 0x55a27924c9d3 _ZNKSt15__uniq_ptr_implI18dwarf2_per_cu_data26dwarf2_per_cu_data_deleterE6_M_ptrEv /usr/include/c++/9/bits/unique_ptr.h:154 0x55a279248bc9 _ZNKSt10unique_ptrI18dwarf2_per_cu_data26dwarf2_per_cu_data_deleterE3getEv /usr/include/c++/9/bits/unique_ptr.h:361 0x55a2792ae718 _ZN27dwarf2_base_index_functions23find_last_source_symtabEP7objfile ../../gdb/dwarf2/read.c:3164 0x55a279afb93e _ZN7objfile23find_last_source_symtabEv ../../gdb/symfile-debug.c:139 0x55a279aa3040 _Z20select_source_symtabP6symtab ../../gdb/source.c:365 0x55a279aa22a1 _Z34set_default_source_symtab_and_linev ../../gdb/source.c:268 0x55a27903c44c list_command ../../gdb/cli/cli-cmds.c:1185 0x55a279051233 do_simple_func ../../gdb/cli/cli-decode.c:95 0x55a27905f221 _Z8cmd_funcP16cmd_list_elementPKci ../../gdb/cli/cli-decode.c:2514 0x55a279c3b0ba _Z15execute_commandPKci ../../gdb/top.c:660 0x55a27940a6c3 _Z15command_handlerPKc ../../gdb/event-top.c:598 0x55a27940b032 _Z20command_line_handlerOSt10unique_ptrIcN3gdb13xfree_deleterIcEEE ../../gdb/event-top.c:797 0x55a279caf401 tui_command_line_handler ../../gdb/tui/tui-interp.c:278 0x55a279409098 gdb_rl_callback_handler ../../gdb/event-top.c:230 0x55a279ed5df2 rl_callback_read_char ../../../readline/readline/callback.c:281 0x55a279408bd8 gdb_rl_callback_read_char_wrapper_noexcept ../../gdb/event-top.c:188 0x55a279408de7 gdb_rl_callback_read_char_wrapper ../../gdb/event-top.c:205 0x55a27940a061 _Z19stdin_event_handleriPv ../../gdb/event-top.c:525 0x55a27a23771e handle_file_event ../../gdbsupport/event-loop.cc:574 0x55a27a237f5f gdb_wait_for_event ../../gdbsupport/event-loop.cc:700 0x55a27a235d81 _Z16gdb_do_one_eventv ../../gdbsupport/event-loop.cc:237 0x55a2796c2ef0 start_event_loop ../../gdb/main.c:418 0x55a2796c3217 captured_command_loop ../../gdb/main.c:478 0x55a2796c717b captured_main ../../gdb/main.c:1340 0x55a2796c7217 _Z8gdb_mainP18captured_main_args ../../gdb/main.c:1355 0x55a278d0b381 main ../../gdb/gdb.c:32 --------------------- A fatal error internal to GDB has been detected, further debugging is not possible. GDB will now terminate. This is a bug, please report it. For instructions, see: . The first issue observed is in the message printed when hitting the breakpoint. It says that there was a break in the .so file as if there was no debug info associated with it, but there is. Later, if we try to display the source where the execution stopped, we have a segfault. Note that not having the debug info on the main binary is not strictly required to encounter some issues, it only is to encounter the segfault. If the main binary has debug information, GDB shows some source form the main binary, unrelated to where we stopped. The core of the issue is that GDB never loads the psymtab for the library. It is not loaded when we first see the .so because in case of detach-on-fork off, follow-fork-mode child, infrun.c sets child_inf->symfile_flags = SYMFILE_NO_READ to delay the psymtab loading as much as possible. If we compare to what was done to handle this before the new indexer was activated, the psymatb construction for the shared library was done under psymbol_functions::expand_symtabs_matching: bool psymbol_functions::expand_symtabs_matching (...) { for (partial_symtab *ps : require_partial_symbols (objfile)) ... } The new indexer's expand_symtabs_matching callback does not have a call to the objfile's require_partial_symbols, so if the partial symbol table is not loaded at this point, there is no mechanism to fix this. Instead of requiring each implementation of the quick_functions to check that partial symbols have been read, I think it is safer to enforce this when calling the quick functions. The general pattern for calling the quick functions is: for (auto *iter : qf) iter->the_actual_method_call (...) This patch proposes to wrap the access of the `qf` field with an accessor which ensures that partial symbols have been read before iterating: qf_require_partial_symbols. All calls to quick functions are updated except: - quick_functions::dump - quick_functions::read_partial_symbols (from objfile::require_partial_symbols) - quick_functions::can_lazily_read_symbols and quick_functions::has_symbols (from objfile::has_partial_symbols) Regression tested on x86_64-gnu-linux. Change-Id: I39a13a937fdbaae613a5cf68864b021000554546 2022-05-26 Tom Tromey Fix crash in new DWARF indexer PR gdb/29128 points out a crash in the new DWARF index code. This happens if the aranges for a CU claims a PC, but the symtab that is created during CU expansion does not actually contain the PC. This can only occur due to bad debuginfo, but at the same time, gdb should not crash. This patch fixes the bug and further merges some code into dwarf2_base_index_functions. This merger helps prevent the same issue from arising from the other index implementations. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29128 2022-05-26 Tom Tromey Finalize each cooked index separately After DWARF has been scanned, the cooked index code does a "finalization" step in a worker thread. This step combines all the index entries into a single master list, canonicalizes C++ names, and splits Ada names to synthesize package names. While this step is run in the background, gdb will wait for the results in some situations, and it turns out that this step can be slow. This is PR symtab/29105. This can be sped up by parallelizing, at a small memory cost. Now each index is finalized on its own, in a worker thread. The cost comes from name canonicalization: if a given non-canonical name is referred to by multiple indices, there will be N canonical copies (one per index) rather than just one. This requires changing the users of the index to iterate over multiple results. However, this is easily done by introducing a new "chained range" class. When run on gdb itself, the memory cost seems rather low -- on my current machine, "maint space 1" reports no change due to the patch. For performance testing, using "maint time 1" and "file" will not show correct results. That approach measures "time to next prompt", but because the patch only affects background work, this shouldn't (and doesn't) change. Instead, a simple way to make gdb wait for the results is to set a breakpoint. Before: $ /bin/time -f%e ~/gdb/install/bin/gdb -nx -q -batch \ -ex 'break main' /tmp/gdb Breakpoint 1 at 0x43ec30: file ../../binutils-gdb/gdb/gdb.c, line 28. 2.00 After: $ /bin/time -f%e ./gdb/gdb -nx -q -batch \ -ex 'break main' /tmp/gdb Breakpoint 1 at 0x43ec30: file ../../binutils-gdb/gdb/gdb.c, line 28. 0.65 Regression tested on x86-64 Fedora 34. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29105 2022-05-26 Alan Modra bit-rot in target before_parse function Copy initialisation over from the elf.em before_parse. Commit ba951afb999 2022-05-03 changed behaviour on arm and score regarding exec stack. This patch restores the previous behaviour. * emultempl/aarch64elf.em (before_parse): Init separate_code, warn_execstack, no_warn_rwx_segments and default_execstack. * emultempl/armelf.em (before_parse): Likewise. * emultempl/scoreelf.em (before_parse): Likewise. * testsuite/ld-elf/elf.exp (target_defaults_to_execstack): Return true for arm and nacl. 2022-05-26 Richard Earnshaw arm: avoid use of GNU builtin function in s_arm_unwind_save_mixed Whilst reviewing Luis' proposed change to s_arm_unwind_save_mixed yesterday I noticed that we were making use of __builting_clzl directly within the main function, which is not guaranteed to be portable. Whilst studying the code further, I also realized that it could be rewritten without using it and also reworked to remove a lot of unnecessary iterations steps. So this patch does that (and also removes the source of the warning that Luis was trying to fix). Finally, with the rewrite we can also simplify the caller of this routine as the new version can handle all the cases directly. * config/tc-arm.c (s_arm_unwind_save_mixed): Rewrite without using __builtin_clzl. (s_arm_unwind_save): Simplify logic for simple/mixed register saves. 2022-05-26 Lancelot SIX gdb/linux-nat: xfer_memory_partial return E_IO on error When accessing /proc/PID/mem, if pread64/pwrite64/read/write encounters an error and return -1, linux_proc_xfer_memory_partial return TARGET_XFER_EOF. I think it should return TARGET_XFER_E_IO in this case. TARGET_XFER_EOF is returned when pread64/pwrite64/read/frite returns 0, which indicates that the address space is gone and the whole process has exited or execed. This patch makes this change. Regression tested on x86_64-linux-gnu. Change-Id: I6030412459663b8d7933483fdda22a6c2c5d7221 2022-05-26 Lancelot SIX gdb/testsuite: prefer gdb_test in gdb.dwarf2/calling-convention Since ed01945057c "Make gdb_test's question non-optional if specified", if the question and response parameters are given to gdb_test, the framework enforces that GDB asks the question. Before this patch, tests needed to use gdb_test_multiple to enforce this. This patch updates the gdb.dwarf2/calling-convention.exp testcase to use gdb_test to check that GDB asks a question. This replaces the more complicated gdb_test_multiple based implementation. Tested on x86_64-gnu-linux. Change-Id: I7216e822ca68f2727e0450970097d74c27c432fe 2022-05-26 Potharla, Rupesh bfd: Add Support for DW_FORM_strx* and DW_FORM_addrx* 2022-05-26 Luca Boccassi ld: add --package-metadata Generate a .note.package FDO package metadata ELF note, following the spec: https://systemd.io/ELF_PACKAGE_METADATA/ If the jansson library is available at build time (and it is explicitly enabled), link ld to it, and use it to validate that the input is correct JSON, to avoid writing garbage to the file. The configure option --enable-jansson has to be used to explicitly enable it (error out when not found). This allows bootstrappers (or others who are not interested) to seamlessly skip it without issues. 2022-05-26 GDB Administrator Automatic date update in version.in 2022-05-26 Natarajan, Kavitha Re: Add bionutils support for DWARF v5's DW_OP_addrx Testsuite files belonging to commit 3ac9da49378c. 2022-05-25 Pedro Alves Show enabled locations with disabled breakpoint parent as "y-" Currently, breakpoint locations that are enabled while their parent breakpoint is disabled are displayed with "y" in the Enb colum of "info breakpoints": (gdb) info breakpoints Num Type Disp Enb Address What 1 breakpoint keep n 1.1 y 0x00000000000011b6 in ... 1.2 y 0x00000000000011c2 in ... 1.3 n 0x00000000000011ce in ... Such locations won't trigger a break, so to avoid confusion, show "y-" instead. For example: (gdb) info breakpoints Num Type Disp Enb Address What 1 breakpoint keep n 1.1 y- 0x00000000000011b6 in ... 1.2 y- 0x00000000000011c2 in ... 1.3 n 0x00000000000011ce in ... The "-" sign is inspired on how the TUI represents breakpoints on the left side of the source window, with "b-" for a disabled breakpoint. Change-Id: I9952313743c51bf21b4b380c72360ef7d4396a09 2022-05-25 Natarajan, Kavitha Add bionutils support for DWARF v5's DW_OP_addrx. 2022-05-25 Pedro Alves gdb: Fix DUPLICATE and PATH regressions throughout The previous patch to add -prompt/-lbl to gdb_test introduced a regression: Before, you could specify an explicit empty message to indicate you didn't want to PASS, like so: gdb_test COMMAND PATTERN "" After said patch, gdb_test no longer distinguishes no-message-specified vs empty-message, so tests that previously would be silent on PASS, now started emitting PASS messages based on COMMAND. This in turn introduced a number of PATH/DUPLICATE violations in the testsuite. This commit fixes all the regressions I could see. This patch uses the new -nopass feature introduced in the previous commit, but tries to avoid it if possible. Most of the patch fixes DUPLICATE issues the usual way, of using with_test_prefix or explicit unique messages. See previous commit's log for more info. In addition to looking for DUPLICATEs, I also looked for cases where we would now end up with an empty message in gdb.sum, due to a gdb_test being passed both no message and empty command. E.g., this in gdb.ada/bp_reset.exp: gdb_run_cmd gdb_test "" "Breakpoint $decimal, foo\\.nested_sub \\(\\).*" was resulting in this in gdb.sum: PASS: gdb.ada/bp_reset.exp: I fixed such cases by passing an explicit message. We may want to make such cases error out. Tested on x86_64 GNU/Linux, native and native-extended-gdbserver. I see zero PATH cases now. I get zero DUPLICATEs with native testing now. I still see some DUPLICATEs with native-extended-gdbserver, but those were preexisting, unrelated to the gdb_test change. Change-Id: I5375f23f073493e0672190a0ec2e847938a580b2 2022-05-25 Pedro Alves Add -nopass option to gdb_test/gdb_test_multiple The previous patch to add -prompt/-lbl to gdb_test introduced a regression: Before, you could specify an explicit empty message to indicate you didn't want to PASS, like so: gdb_test COMMAND PATTERN "" After said patch, gdb_test no longer distinguishes no-message-specified vs empty-message, so tests that previously would be silent on PASS, now started emitting PASS messages based on COMMAND. This in turn introduced a number of PATH/DUPLICATE violations in the testsuite. I think that not issuing a PASS should be restricted to only a few cases -- namely in shared routines exported by gdb.exp, which happen to use gdb_test internally. In tests that iterate an unknown number of tests exercising some racy scenario. In the latter case, if we emit PASSes for each iteration, we run into the situation where different testsuite runs emit a different number of PASSes. Thus, this patch preserves the current behavior, and, instead, adds a new "-nopass" option to gdb_test and gdb_test_no_output. Compared to the old way of supressing PASS with an empty message, this has the advantage that you can specify a FAIL message that is distinct from the command string, and, it's also more explicit. Change-Id: I5375f23f073493e0672190a0ec2e847938a580b2 2022-05-25 Tsukasa OI RISC-V: Fix RV32Q conflict This commit makes RV32 + 'Q' extension (version 2.2 or later) not conflicting since this combination is no longer prohibited by the specification. bfd/ChangeLog: * elfxx-riscv.c (riscv_parse_check_conflicts): Remove conflict detection that prohibits RV32Q on 'Q' version 2.2 or later. gas/ChangeLog: * testsuite/gas/riscv/march-fail-rv32iq.d: Removed. * testsuite/gas/riscv/march-fail-rv32iq.l: Likewise. * testsuite/gas/riscv/march-fail-rv32iq2p0.d: New test showing RV32IQ fails on 'Q' extension version 2.0. * testsuite/gas/riscv/march-fail-rv32iq2p0.l: Likewise. * testsuite/gas/riscv/march-fail-rv32iq2.d: Likewise. * testsuite/gas/riscv/march-fail-rv32iq-isa-2p2.d: New test showing RV32IQ fails on ISA specification version 2.2. * testsuite/gas/riscv/march-ok-rv32iq2p2.d: New test showing RV32IQ succesds on 'Q' extension version 2.2. * testsuite/gas/riscv/march-ok-rv32iq-isa-20190608.d: New test showing RV32IQ succesds on ISA specification 20190608. 2022-05-25 Dmitry Selyutin opcodes: introduce BC field; fix isel Per Power ISA Version 3.1B 3.3.12, isel uses BC field rather than CRB field present in binutils sources. Also, per 1.6.2, BC has the same semantics as BA and BB fields, so this should keep the same flags and mask, only with the different offset. opcodes/ * ppc-opc.c (BC): Define new field, with the same definition as CRB field, but with the PPC_OPERAND_CR_BIT flag present. gas/ * testsuite/gas/ppc/476.d: Update. * testsuite/gas/ppc/a2.d: Update. * testsuite/gas/ppc/e500.d: Update. * testsuite/gas/ppc/power7.d: Update. 2022-05-25 Dmitry Selyutin ppc: extend opindex to 16 bits With the upcoming SVP64 extension[0] to PowerPC architecture, it became evident that PowerPC operand indices no longer fit 8 bits. This patch switches the underlying type to uint16_t, also introducing a special typedef so that any future extension goes even smoother. [0] https://libre-soc.org include/ * opcode/ppc.h (ppc_opindex_t): New typedef. (struct powerpc_opcode): Use it. (PPC_OPINDEX_MAX): Define. gas/ * write.h (struct fix): Increase size of fx_pcrel_adjust. Reorganise. * config/tc-ppc.c (insn_validate): Use ppc_opindex_t for operands. (md_assemble): Likewise. (md_apply_fix): Likewise. Mask fx_pcrel_adjust with PPC_OPINDEX_MAX. (ppc_setup_opcodes): Adjust opcode index assertion. opcodes/ * ppc-dis.c (skip_optional_operands): Use ppc_opindex_t for operand pointer. (lookup_powerpc, lookup_prefix, lookup_vle, lookup_spe2): Likewise. (print_insn_powerpc): Likewise. 2022-05-25 GDB Administrator Automatic date update in version.in 2022-05-24 Tom de Vries [gdb/testsuite] Fix gdb.opt/clobbered-registers-O2.exp with clang When running test-case gdb.opt/clobbered-registers-O2.exp with clang 12.0.1, I get: ... (gdb) run ^M Starting program: clobbered-registers-O2 ^M ^M Program received signal SIGSEGV, Segmentation fault.^M gen_movsd (operand0=, operand1=) at \ clobbered-registers-O2.c:31^M 31 return *start_sequence(operand0, operand1);^M (gdb) FAIL: gdb.opt/clobbered-registers-O2.exp: runto: run to start_sequence ... The problem is that the breakpoint in start_sequence doesn't trigger, because: - the call to start_sequence in gen_movsd is optimized away, despite the __attribute__((noinline)), so the actual function start_sequence doesn't get called, and - the debug info doesn't contain inlined function info, so there's only one breakpoint location. Adding noclone and noipa alongside the noinline attribute doesn't fix this. Adding the clang-specific attribute optnone in start_sequence does, but since it inhibits all optimization, that's not a preferred solution in a gdb.opt test-case, and it would work only for clang and not other compilers that possibly have the same issue. Fix this by moving functions start_sequence and gen_movsd into their own files, as a way of trying harder to enforce noinline/noipa/noclone. Tested on x86_64-linux. 2022-05-24 Tom de Vries [gdb/testsuite] Fix gdb.opt/clobbered-registers-O2.exp with gcc-12 When running test-case gdb.opt/clobbered-registers-O2.exp with gcc-12, I run into: ... (gdb) PASS: gdb.opt/clobbered-registers-O2.exp: backtracing print operand0^M $1 = (unsigned int *) 0x7fffffffd070^M (gdb) print *operand0^M $2 = 4195541^M (gdb) FAIL: gdb.opt/clobbered-registers-O2.exp: print operand0 ... The problem is that starting gcc-12, the assignments to x and y in main are optimized away: ... int main(void) { unsigned x, y; x = 13; y = 14; return (int)gen_movsd (&x, &y); ... Fix this by making x and y volatile. Note that the test-case intends to check the handling of debug info for optimized code in function gen_movsd, so inhibiting optimization in main doesn't interfere with that. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29161 2022-05-24 Tiezhu Yang gdb: LoongArch: Define LOONGARCH_LINUX_NUM_GREGSET as 45 LOONGARCH_LINUX_NUM_GREGSET should be defined as 45 (32 + 1 + 1 + 11) due to reserved 11 for extension in glibc, otherwise when execute: make check-gdb TESTS="gdb.base/corefile.exp" there exists the following failed testcase: (gdb) core-file /home/loongson/build.git/gdb/testsuite/outputs/gdb.base/corefile/corefile.core [New LWP 7742] warning: Unexpected size of section `.reg/7742' in core file. Core was generated by `/home/loongson/build.git/gdb/testsuite/outputs/gdb.base/corefile/corefile'. Program terminated with signal SIGABRT, Aborted. warning: Unexpected size of section `.reg/7742' in core file. #0 0x000000fff76f4e24 in raise () from /lib/loongarch64-linux-gnu/libc.so.6 (gdb) FAIL: gdb.base/corefile.exp: core-file warning-free 2022-05-24 Christophe Lyon AArch64: add support for DFP (Decimal Floating point) This small patch adds support for TYPE_CODE_DECFLOAT in aapcs_is_vfp_call_or_return_candidate_1 and pass_in_v_vfp_candidate, so that GDB for AArch64 knows how to pass DFP parameters and how to read DFP results when calling a function. Tested on aarch64-linux-gnu, with a GCC with DFP support in the PATH, all of GDB's DFP tests pass. 2022-05-24 Christophe Lyon Merge config/ changes from GCC, to enable DFP on AArch64 2022-04-28 Christophe Lyon config/ * dfp.m4 (enable_decimal_float): Enable BID for AArch64. libdecnumber/ * configure: Regenerate. 2022-05-24 Alan Modra PR29171, invalid read causing SIGSEGV The fix here is to pass "section" down to read_and_display_attr_value. The test in read_and_display_attr_value is a little bit of hardening. PR 29171 * dwarf.c (display_debug_macro, display_debug_names): Pass section to read_and_display_attr_value2. (read_and_display_attr_value): Don't attempt to check for .dwo section name when section is NULL. 2022-05-24 Alan Modra PR29170, divide by zero displaying fuzzed .debug_names PR 29170 * dwarf.c (display_debug_names): Don't attempt to display bucket clashes when bucket count is zero. PR29169, invalid read displaying fuzzed .gdb_index PR 29169 * dwarf.c (display_gdb_index): Combine sanity checks. Calculate element counts, not word counts. 2022-05-24 GDB Administrator Automatic date update in version.in 2022-05-23 John Baldwin Tweak the std::hash<> specialization for aarch64_features. Move the specialization into an explicit std namespace to workaround a bug in older compilers. GCC 6.4.1 at least fails to compile the previous version with the following error: gdb/arch/aarch64.h:48:13: error: specialization of 'template struct std::hash' in different namespace [-fpermissive] struct std::hash 2022-05-23 John Baldwin Fix loongarch_iterate_over_regset_sections for non-native targets. Define a constant for the number of registers stored in a register set and use this with register_size to compute the size of the general-purpose register set in core dumps. This also fixes the build on hosts such as FreeBSD that do not define an elf_gregset_t type. 2022-05-23 Tiezhu Yang gdb: LoongArch: Implement the iterate_over_regset_sections gdbarch method When execute the following command on LoongArch: make check-gdb TESTS="gdb.base/auxv.exp" there exist the following unsupported and failed testcases: UNSUPPORTED: gdb.base/auxv.exp: gcore FAIL: gdb.base/auxv.exp: load core file for info auxv on native core dump FAIL: gdb.base/auxv.exp: info auxv on native core dump FAIL: gdb.base/auxv.exp: matching auxv data from live and core UNSUPPORTED: gdb.base/auxv.exp: info auxv on gcore-created dump UNSUPPORTED: gdb.base/auxv.exp: matching auxv data from live and gcore we can see the following messages in gdb/testsuite/gdb.log: gcore /home/loongson/build.git/gdb/testsuite/outputs/gdb.base/auxv/auxv.gcore Target does not support core file generation. (gdb) UNSUPPORTED: gdb.base/auxv.exp: gcore In order to fix the above issues, implement the iterate_over_regset_sections gdbarch method to iterate over core file register note sections on LoongArch. By the way, with this patch, the failed testcases in gdb.base/corefile.exp and gdb.base/gcore.exp can also be fixed. 2022-05-23 Tom de Vries [gdb/testsuite] Fix -prompt handling in gdb_test With check-read1 I run into: ... [infrun] maybe_set_commit_resumed_all_targets: not requesting commit-resumed for target native, no resumed threads^M (gdb) FAIL: gdb.base/ui-redirect.exp: debugging: continue [infrun] fetch_inferior_event: exit^M ... The problem is that proc gdb_test doesn't pass down the -prompt option to proc gdb_test_multiple, due to a typo making this lappend without effect: ... set opts {} lappend "-prompt $prompt" ... Fix this by actually appending to opts. Tested on x86_64-linux. 2022-05-23 Tom de Vries [gdbsupport] Fix UB in print-utils.cc:int_string When building gdb with -fsanitize=undefined, I run into: ... (gdb) PASS: gdb.ada/access_to_packed_array.exp: set logging enabled on maint print symbols^M print-utils.cc:281:29:runtime error: negation of -9223372036854775808 cannot \ be represented in type 'long int'; cast to an unsigned type to negate this \ value to itself (gdb) FAIL: gdb.ada/access_to_packed_array.exp: maint print symbols ... By running in a debug session, we find that this happens during printing of: ... typedef system.storage_elements.storage_offset: \ range -9223372036854775808 .. 9223372036854775807; ... Possibly, an ada test-case could be created that exercises this in isolation. The problem is here in int_string, where we negate a val with type LONGEST: ... return decimal2str ("-", -val, width); ... Fix this by, as recommend, using "-(ULONGEST)val" instead. Tested on x86_64-linux. 2022-05-23 Tom de Vries [gdb/exp] Fix UB in scalar_binop When building gdb with -fsanitize=undefined, I run into: ... $ gdb -q -batch -ex "p -(-0x7fffffffffffffff - 1)" src/gdb/valarith.c:1385:10: runtime error: signed integer overflow: \ 0 - -9223372036854775808 cannot be represented in type 'long int' $1 = -9223372036854775808 ... Fix this by performing the substraction in scalar_binop using unsigned types. Tested on x86_64-linux. 2022-05-23 Tom de Vries [gdb/ada] Fix gdb.ada/dynamic-iface.exp with gcc 7 This test in test-case gdb.ada/dynamic-iface.exp passes with gcc 8: ... (gdb) print obj^M $1 = (n => 3, a => "ABC", value => 93)^M (gdb) PASS: gdb.ada/dynamic-iface.exp: print local as interface ... but fails with gcc 7: ... (gdb) print obj^M $1 = ()^M (gdb) FAIL: gdb.ada/dynamic-iface.exp: print local as interface ... More concretely, we have trouble finding the type of obj. With gcc 8: ... $ gdb -q -batch main -ex "b concrete.adb:20" -ex run -ex "ptype obj" ... type = new concrete.intermediate with record value: integer; end record ... and with gcc 7: ... type = tagged record null; end record ... The translation from tagged type to "full view" type happens in ada_tag_value_at_base_address, where we hit this code: ... /* Storage_Offset'Last is used to indicate that a dynamic offset to top is used. In this situation the offset is stored just after the tag, in the object itself. */ if (offset_to_top == last) { struct value *tem = value_addr (tag); tem = value_ptradd (tem, 1); tem = value_cast (ptr_type, tem); offset_to_top = value_as_long (value_ind (tem)); } ... resulting in an offset_to_top for gcc 8: ... (gdb) p offset_to_top $1 = -16 ... and for gcc 7: ... (gdb) p offset_to_top $1 = 16 ... The difference is expected, it bisects to gcc commit d0567dc0dbf ("[multiple changes]") which mentions this change. There's some code right after the code quoted above that deals with this change: ... else if (offset_to_top > 0) { /* OFFSET_TO_TOP used to be a positive value to be subtracted from the base address. This was however incompatible with C++ dispatch table: C++ uses a *negative* value to *add* to the base address. Ada's convention has therefore been changed in GNAT 19.0w 20171023: since then, C++ and Ada use the same convention. Here, we support both cases by checking the sign of OFFSET_TO_TOP. */ offset_to_top = -offset_to_top; } ... but it's not activated because of the 'else'. Fix this by removing the 'else'. Tested on x86_64-linux, with gcc 7.5.0. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29057 2022-05-23 Mark Harmstone ld: use definitions in generate_reloc rather than raw literals 2022-05-23 Tom de Vries [gdb/testsuite] Skip language auto in gdb.base/parse_number.exp In test-case gdb.base/parse_number.exp, we skip architecture auto in the $supported_archs loop, to prevent duplicate testing. Likewise, skip language auto and its alias local in the $::all_languages loop. This reduces the number of tests from 17744 to 15572. Tested on x86_64-linux, with a build with --enable-targets=all. 2022-05-23 GDB Administrator Automatic date update in version.in 2022-05-22 Alok Kumar Sharma Accept functions with DW_AT_linkage_name present Currently GDB is not able to debug (Binary generated with Clang) variables present in shared/private clause of OpenMP Task construct. Please note that LLVM debugger LLDB is able to debug. In case of OpenMP, compilers generate artificial functions which are not present in actual program. This is done to apply parallelism to block of code. For non-artifical functions, DW_AT_name attribute should contains the name exactly as present in actual program. (Ref# http://wiki.dwarfstd.org/index.php?title=Best_Practices) Since artificial functions are not present in actual program they not having DW_AT_name and having DW_AT_linkage_name instead should be fine. Currently GDB is invalidating any function not havnig DW_AT_name which is why it is not able to debug OpenMP (Clang). It should be fair to fallback to check DW_AT_linkage_name in case DW_AT_name is absent. 2022-05-22 GDB Administrator Automatic date update in version.in 2022-05-21 GDB Administrator Automatic date update in version.in 2022-05-20 Pedro Alves Rename base_breakpoint -> code_breakpoint Even after the previous patches reworking the inheritance of several breakpoint types, the present breakpoint hierarchy looks a bit surprising, as we have "breakpoint" as the superclass, and then "base_breakpoint" inherits from "breakpoint". Like so, simplified: breakpoint base_breakpoint ordinary_breakpoint internal_breakpoint momentary_breakpoint ada_catchpoint exception_catchpoint tracepoint watchpoint catchpoint exec_catchpoint ... The surprising part to me is having "base_breakpoint" being a subclass of "breakpoint". I'm just refering to naming here -- I mean, you'd expect that it would be the top level baseclass that would be called "base". Just flipping the names of breakpoint and base_breakpoint around wouldn't be super great for us, IMO, given we think of every type of *point as a breakpoint at the user visible level. E.g., "info breakpoints" shows watchpoints, tracepoints, etc. So it makes to call the top level class breakpoint. Instead, I propose renaming base_breakpoint to code_breakpoint. The previous patches made sure that all code breakpoints inherit from base_breakpoint, so it's fitting. Also, "code breakpoint" contrasts nicely with a watchpoint also being typically known as a "data breakpoint". After this commit, the resulting hierarchy looks like: breakpoint code_breakpoint ordinary_breakpoint internal_breakpoint momentary_breakpoint ada_catchpoint exception_catchpoint tracepoint watchpoint catchpoint exec_catchpoint ... ... which makes a lot more sense to me. I've left this patch as last in the series in case people want to bikeshed on the naming. "code" has a nice property that it's exactly as many letters as "base", so this patch didn't require any reindentation. :-) Change-Id: Id8dc06683a69fad80d88e674f65e826d6a4e3f66 2022-05-20 Pedro Alves Test "set multiple-symbols on" creating multiple breakpoints To look for code paths that lead to create_breakpoints_sal creating multiple breakpoints, I ran the whole testsuite with this hack: --- a/gdb/breakpoint.c +++ b/gdb/breakpoint.c @@ -8377,8 +8377,7 @@ create_breakpoints_sal (struct gdbarch *gdbarch, int from_tty, int enabled, int internal, unsigned flags) { - if (canonical->pre_expanded) - gdb_assert (canonical->lsals.size () == 1); + gdb_assert (canonical->lsals.size () == 1); surprisingly, the assert never failed... The way to get to create_breakpoints_sal with multiple lsals is to use "set multiple-symbols ask" and then select multiple options from the menu, like so: (gdb) set multiple-symbols ask (gdb) b overload1arg [0] cancel [1] all [2] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg() [3] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(char) [4] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(double) [5] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(float) [6] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(int) [7] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(long) [8] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(short) [9] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(signed char) [10] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(unsigned char) [11] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(unsigned int) [12] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(unsigned long) [13] /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc:foo::overload1arg(unsigned short) > 2-3 Breakpoint 2 at 0x1532: file /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc, line 107. Breakpoint 3 at 0x154b: file /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.cp/ovldbreak.cc, line 110. warning: Multiple breakpoints were set. Use the "delete" command to delete unwanted breakpoints. ... which would trigger the assert. This commit makes gdb.cp/ovldbreak.exp test this scenario. It does that by making set_bp_overloaded take a list of expected created breakpoints rather than just one breakpoint. It converts the procedure to use gdb_test_multiple instead of send_gdb/gdb_expect along the way. Change-Id: Id87d1e08feb6670440d926f5344e5081f5e37c8e 2022-05-20 Pedro Alves Make sure momentary breakpoints are always thread-specific This adds a new ctor to momentary_breakpoints with a few parameters that are always necessary for momentary breakpoints. In particular, I noticed that set_std_terminate_breakpoint doesn't make the breakpoint be thread specific, which looks like a bug to me. The point of that breakpoint is to intercept std::terminate calls that happen as result of the called thread throwing an exception that won't be caught by the dummy frame. If some other thread calls std::terminate, IMO, it's no different from some other thread calling exit/_exit, for example. Change-Id: Ifc5ff4a6d6e58b8c4854d00b86725382d38a1a02 2022-05-20 Pedro Alves Momentary breakpoints should have no breakpoint number Momentary breakpoints have no breakpoint number, their breakpoint number should be always 0, to avoid constantly incrementing (or decrementing) the internal breakpoint count. Indeed, set_momentary_breakpoint installs the created breakpoint without a number. However, momentary_breakpoint_from_master incorrectly gives an internal breakpoint number to the new breakpoint. This commit fixes that. Change-Id: Iedcae5432cdf232db9e9a6e1a646d358abd34f95 2022-05-20 Pedro Alves Add/tweak intro comments of struct breakpoint and several subclasses This tweaks the intro comments of the following classes: internal_breakpoint momentary_breakpoint breakpoint base_breakpoint watchpoint catchpoint Change-Id: If6b31f51ebbb81705fbe5b8435f60ab2c88a98c8 2022-05-20 Pedro Alves Move add_location(sal) to base_breakpoint After the previous patches, only base_breakpoint subclasses use add_location(sal), so we can move it to base_breakpoint (a.k.a. base class for code breakpoints). This requires a few casts here and there, but always at spots where you can see from context what the breakpoint's type actually is. I inlined new_single_step_breakpoint into its only caller exactly for this reason. I did try to propagate more use of base_breakpoint to avoid casts, but that turned out unwieldy for this patch. Change-Id: I49d959322b0fdce5a88a216bb44730fc5dd7c6f8 2022-05-20 Pedro Alves Move common bits of catchpoint/exception_catchpoint to breakpoint's ctor Move common bits of catchpoint and exception_catchpoint to breakpoint's ctor, to avoid duplicating code. Change-Id: I3a115180f4d496426522f1d89a3875026aea3cf2 2022-05-20 Pedro Alves Make catchpoint inherit breakpoint, eliminate init_raw_breakpoint struct catchpoint's ctor currently calls init_raw_breakpoint, which is a bit weird, as that ctor-like function takes a sal argument, but catchpoints don't have code locations. Instead, make struct catchpoint's ctor add the catchpoint's dummy location using add_dummy_location. init_raw_breakpoint uses add_location under the hood, and with a dummy sal it would ultimately use the breakpoint's gdbarch for the location's gdbarch, so replace the references to loc->gdbarch (which is now NULL) in syscall_catchpoint to references to the catchpoint's gdbarch. struct catchpoint's ctor was the last user of init_raw_breakpoint, so this commit eliminates the latter. Since catchpoint locations aren't code locations, make struct catchpoint inherit struct breakpoint instead of base_breakpoint. This let's us delete the tracepoint::re_set override too. Change-Id: Ib428bf71efb09fdaf399c56e4372b0f41d9c5869 2022-05-20 Pedro Alves Make breakpoint_address_bits look at the location kind Software watchpoints allocate a special dummy location using software_watchpoint_add_no_memory_location, and then breakpoint_address_bits checks whether the location is that special location to decide whether the location has a meaninful address to print. Introduce a new bp_loc_software_watchpoint location kind, and make breakpoint_address_bits use bl_address_is_meaningful instead, which returns false for bp_loc_other, which is in accordance with we document for bp_location::address: /* (... snip ...) Valid for all types except bp_loc_other. */ CORE_ADDR address = 0; Rename software_watchpoint_add_no_memory_location to add_dummy_location, and simplify it. This will be used by catchpoints too in a following patch. Note that neither "info breakpoints" nor "maint info breakpoints" actually prints the addresses of watchpoints, but I think it would be useful to do so in "maint info breakpoints". This approach let's us implement that in the future. Change-Id: I50e398f66ef618c31ffa662da755eaba6295aed7 2022-05-20 Pedro Alves Make exception_catchpoint inherit base_breakpoint instead of catchpoint exception_catchpoint is really a code breakpoint, with locations set by sals, re-set like other code breakpoints, etc., so make it inherit base_breakpoint. This adds a bit of duplicated code to exception_catchpoint's ctor (copied from struct catchpoint's ctor), but it will be eliminated in a following patch. Change-Id: I9fbb2927491120e9744a4f5e5cb5e6870ca07009 2022-05-20 Pedro Alves Refactor momentary breakpoints, eliminate set_raw_breakpoint{,_without_location} This commit makes set_momentary_breakpoint allocate the breakpoint type without relying on set_raw_breakpoint, and similarly, momentary_breakpoint_from_master not rely on set_raw_breakpoint_without_location. This will let us convert init_raw_breakpoint to a ctor in a following patch. The comment about set_raw_breakpoint being used in gdbtk sources is stale. gdbtk no longer uses it. Change-Id: Ibbf77731e4b22e18ccebc1b5799bbec0aff28c8a 2022-05-20 Pedro Alves Refactor set_internal_breakpoint / internal_breakpoint ctor This moves initialization of internal_breakpoint's breakpoint fields to internal_breakpoint's ctor, and stops using new_breakpoint_from_type for internal_breakpoint breakpoints. Change-Id: I898ed0565f47cb00e4429f1c6446e6f9a385a78d 2022-05-20 Pedro Alves Convert init_ada_exception_catchpoint to a ctor Currently, init_ada_exception_catchpoint is defined in breakpoint.c, I presume so it can call the static describe_other_breakpoints function. I think this is a dependency inversion. init_ada_exception_catchpoint, being code specific to Ada catchpoints, should be in ada-lang.c, and describe_other_breakpoints, a core function, should be exported. And then, we can convert init_ada_exception_catchpoint to an ada_catchpoint ctor. Change-Id: I07695572dabc5a75d3d3740fd9b95db1529406a1 2022-05-20 Pedro Alves Make ada_catchpoint_location's owner ctor parameter be ada_catchpoint This commit changes ada_catchpoint_location's ctor from: ada_catchpoint_location (breakpoint *owner) to: ada_catchpoint_location (ada_catchpoint *owner) just to make the code better document intention. To do this, we need to move the ada_catchpoint_location type's definition to after ada_catchpoint is defined, otherwise the compiler doesn't know that ada_catchpoint is convertible to struct breakpoint. Change-Id: Id908b2e38bde30b262381e00c5637adb9bf0129d 2022-05-20 Pedro Alves init_breakpoint_sal -> base_breakpoint::base_breakpoint This converts init_breakpoint_sal to a base_breakpoint constructor. It removes a use of init_raw_breakpoint. To avoid manually adding a bunch of parameters to new_breakpoint_from_type, and manually passing them down to the constructors of a number of different base_breakpoint subclasses, make new_breakpoint_from_type a variable template function. Change-Id: I4cc24133ac4c292f547289ec782fc78e5bbe2510 2022-05-20 Pedro Alves Remove "internal" parameter from a couple functions None of init_breakpoint_sal, create_breakpoint_sal, and strace_marker_create_breakpoints_sal make use of their "internal" parameter, so remove it. Change-Id: I943f3bb44717ade7a7b7547edf8f3ff3c37da435 2022-05-20 Pedro Alves More breakpoint_ops parameter elimination Remove breakpoint_ops parameters from a few functions that don't need it. Change-Id: Ifcf5e1cc688184acbf5e19b8ea60138ebe63cf28 2022-05-20 Pedro Alves Make a few functions work with base_breakpoint instead of breakpoint This makes tracepoints inherit from base_breakpoint, since their locations are code locations. If we do that, then we can eliminate tracepoint::re_set and tracepoint::decode_location, as they are doing the same as the base_breakpoint implementations. With this, all breakpoint types created by new_breakpoint_from_type are code breakpoints, i.e., base_breakpoint subclasses, and thus we can make it return a base_breakpoint pointer. Finally, init_breakpoint_sal can take a base_breakpoint pointer as "self" pointer too. This will let us convert this function to a base_breakpoint ctor in a following patch. Change-Id: I3a4073ff1a4c865f525588095c18dc42b744cb54 2022-05-20 Pedro Alves ranged_breakpoint: move initialization to ctor Move initialization of ranged_breakpoint's fields to its ctor. Change-Id: If7b842861f3cc6a429ea329d45598b5852283ba3 2022-05-20 Pedro Alves ranged_breakpoint: use install_breakpoint This commit replaces a chunk of code in break_range_command by an equivalent call to install_breakpoint. Change-Id: I31c06cabd36f5be91740aab029265f678aa78e35 2022-05-20 Pedro Alves ranged_breakpoint: don't use init_raw_breakpoint ranged_breakpoint's ctor already sets the breakpoint's type to bp_hardware_breakpoint. Since this is a "regular" breakpoint, b->pspace should remain NULL. Thus, the only thing init_raw_breakpoint is needed for, is to add the breakpoint's location. Do that directly. Change-Id: I1505de94c3919881c2b300437e2c0da9b05f76bd 2022-05-20 Pedro Alves Make structs breakpoint/base_breakpoint/catchpoint be abstract You should never instanciate these types directly. Change-Id: I8086c74c415eadbd44924bb0ef20f34b5b97ee6f 2022-05-20 Pedro Alves add_location_to_breakpoint -> breakpoint::add_location Make add_location_to_breakpoint be a method of struct breakpoint. A patch later in the series will move this to base_breakpoint, but for now, it needs to be here. Change-Id: I5bdc2ec1a7c2d66f26f51bf6f6adc8384a90b129 2022-05-20 Carl Love PowerPC: Make test gdb.arch/powerpc-power10.exp Endian independent. The .quad statement stores the 64-bit hex value in Endian order. When used to store a 64-bit prefix instructions on Big Endian (BE) systems, the .quad statement stores the 32-bit suffix followed by the 32-bit prefix rather than the expected order of prefix word followed by the suffix word. GDB fetches 32-bits at a time when disassembling instructions. The disassembly on BE gets messed up since GDB fetches the suffix first and interprets it as a word instruction not a prefixed instruction. When gdb fetches the prefix part of the instruction, following the initial suffix word, gdb associates the prefix word incorrectly with the following 32-bits as the suffix for the instruction when in fact it is the following instruction. For example on BE we have two prefixed instructions stored using the .quad statement as follows: addr word GDB action --------------------------------------------- 1 suffix inst A <- GDB interprets as a word instruction 2 prefix inst A <- GDB uses this prefix with 3 suffix inst B <- this suffix rather than the suffix at addr 1. 4 prefix inst B This patch changes the .quad statement into two .longs to explicitly store the prefix followed by the suffix of the instruction. The patch rearranges the instructions to put all of the word instructions together followed by the prefix instructions for clarity. The patch has been tested on Power 10 and Power 7 BE and LE to verify the change works as expected. 2022-05-20 Tom Tromey Remove obsolete text from documentation The documentation says that -enable-pretty-printing is experimental in 7.0 and may change -- that's long enough ago that I think we can say that this text is no longer correct or useful. 2022-05-20 Nick Clifton Stop readekf and objdump from aggressively following links. * dwarf.c (dwarf_select_sections_by_names): Return zero if no sections were selected. (dwarf_select_sections_by_letters): Likewise. * dwarf.h: (dwarf_select_sections_by_names): Update prototype. (dwarf_select_sections_by_letters): Update prototype. * objdump.c (might_need_separate_debug_info): New function. (dump_bfd): Call new function before attempting to load separate debug info files. (main): Do not enable dwarf section dumping for -WK or -WN. * readelf.c (parse_args): Do not enable dwarf section dumping for -wK or -wN. (might_need_separate_debug_info): New function. (process_object): Call new function before attempting to load separate debug info files. * testsuite/binutils-all/debuginfo.exp: Expect -WE and -wE debuginfod tests to pass. * testsuite/binutils-all/objdump.Wk: Add extra regexps. * testsuite/binutils-all/readelf.k: Add extra regexps. 2022-05-20 Jia-Wei Chen RISC-V: Update zfinx implement with zicsr. Update zfinx implement with zicsr, fix missing fcsr use by zfinx. add zicsr imply by zfinx. bfd/ChangeLog: * elfxx-riscv.c: New imply. gas/ChangeLog: * testsuite/gas/riscv/csr-insns-pseudo-zfinx.d: New test. opcodes/ChangeLog: * riscv-opc.c: Update insn class. 2022-05-20 Tsukasa OI RISC-V: Remove RV128-only fmv instructions As fmv.x.q and fmv.q.x instructions are RV128-only (not RV64-only), it should be removed until RV128 support for GNU Binutils is required again. gas/ChangeLog: * testsuite/gas/riscv/fmv.x.q-rv64-fail.d: New failure test. * testsuite/gas/riscv/fmv.x.q-rv64-fail.l: Likewise. * testsuite/gas/riscv/fmv.x.q-rv64-fail.s: Likewise. include/ChangeLog: * opcode/riscv-opc.h (MATCH_FMV_X_Q, MASK_FMV_X_Q, MATCH_FMV_Q_X, MASK_FMV_Q_X): Remove RV128-only instructions. opcodes/ChangeLog: * riscv-opc.c (riscv_opcodes): Remove RV128-only instructions. 2022-05-20 Aditya Vidyadhar Kamath Fix non-pointer type compilation error in aix-thread.c In aix-thread.c we use ms->value_address () to get the symbol address. This triggers the following compiler error... base operand of '->' has non-pointer type 'bound_minimal_symbol' ... because ms is not a pointer. This commit fixes this error by using ms.value_address () instead. 2022-05-20 Steinar H. Gunderson add a trie to map quickly from address range to compilation unit When using perf to profile large binaries, _bfd_dwarf2_find_nearest_line() becomes a hotspot, as perf wants to get line number information (for inline-detection purposes) for each and every sample. In Chromium in particular (the content_shell binary), this entails going through 475k address ranges, which takes a long time when done repeatedly. Add a radix-256 trie over the address space to quickly map address to compilation unit spaces; for content_shell, which is 1.6 GB when some (but not full) debug information turned is on, we go from 6 ms to 0.006 ms (6 µs) for each lookup from address to compilation unit, a 1000x speedup. There is a modest RAM increase of 180 MB in this binary (the existing linked list over ranges uses about 10 MB, and the entire perf job uses between 2–3 GB for a medium-size profile); for smaller binaries with few ranges, there should be hardly any extra RAM usage at all. 2022-05-20 Alan Modra Tidy warn-execstack handling Make ld and bfd values consistent by swapping values 0 and 2 in link_info.warn_execstack. This has the benefit of making the value an "extended" boolean, with 0 meaning no warning, 1 meaning warn, other values a conditional warning. Yes, this patch introduces fails on arm/aarch64. Not a problem with this patch but an arm/aarch64 before_parse problem. bfd/ * elflink.c (bfd_elf_size_dynamic_sections): Adjust warn_execstack test. include/ * bfdlink.h (warn_execstack): Swap 0 and 2 meaning. ld/ * configure.ac (DEFAULT_LD_WARN_EXECSTACK): Use values of 0, 1, 2 consistent with link_info.warn_execstack. * ld.texi: Typo fixes. * lexsup.c (parse_args): Adjust setting of link_info.warn_execstack. (elf_static_list_options): Adjust help message conditions. * configure: Regenerate. 2022-05-20 GDB Administrator Automatic date update in version.in 2022-05-19 Srinath Parvathaneni arm: Fix system register fpcxt_ns and fpcxt_s naming convention. The current assembler accepts system registers FPCXTNS and FPCXTS for Armv8.1-M Mainline Instructions VSTR, VLDR, VMRS and VMSR. Assembler should be also allowing FPCXT_NS, fpcxt_ns, fpcxtns, FPCXT_S, fpcxt_s and fpcxts. This patch fixes the issue. 2022-05-19 Andrew Burgess gdb/doc: use @value{GDBP} in 'info pretty-printer' example Update the 'info pretty-printer' example in the manual to make use of @value{GDBP} instead of hard-coding '(gdb)'. 2022-05-19 Andrew Burgess gdb/doc: make use of group/end group in 'info pretty-printers' example The 'info pretty-printers' example is pretty long and consists of many commands and their output. Currently, when the pdf manual is generated this example spans a page-break, with the page-break falling part way through some example output from GDB. This commit breaks up the example using @group .... @end group, within each group is a single GDB command and all its output. Now, when the pdf manual is created, the page-break is placed after the output of one GDB command, and before the subsequent command, this looks much nicer. 2022-05-19 Nikolaos Chatzikonstantinou gdb/doc: fix inconsistent info pretty-printer example The example for 'info pretty-printer' in the manual passes an object-regexp in some cases, but presents output as though no object-regexp was passed. This commit fixes the two mistakes, in one case, fixing the output to filter based on object-regexp, and in the other, to remove the object-regexp from the command and leave all the output. 2022-05-19 Nick Clifton Fix potentially uninitialised variables in the Windows tools 2022-05-19 Tiezhu Yang gdb: testsuite: Support displaced stepping on LoongArch When execute the following command on LoongArch: make check-gdb TESTS="gdb.base/async-shell.exp" we can see the following message in gdb/testsuite/gdb.sum: UNSUPPORTED: gdb.base/async-shell.exp: displaced stepping modify support_displaced_stepping to support displaced stepping on LoongArch. With this patch: PASS: gdb.base/async-shell.exp: run & PASS: gdb.base/async-shell.exp: shell echo foo PASS: gdb.base/async-shell.exp: interrupt PASS: gdb.base/async-shell.exp: process stopped I did the following tests that use support_displaced_stepping with this patch on LoongArch, there is no failed testcases. loongson@linux:~/gdb.git$ grep -r support_displaced_stepping gdb/testsuite/gdb.* gdb/testsuite/gdb.arch/disp-step-insn-reloc.exp:if { ![support_displaced_stepping] } { gdb/testsuite/gdb.base/step-over-no-symbols.exp: if { $displaced != "off" && ![support_displaced_stepping] } { gdb/testsuite/gdb.base/moribund-step.exp:if { ![support_displaced_stepping] } { gdb/testsuite/gdb.base/async-shell.exp:if { ![support_displaced_stepping] } { gdb/testsuite/gdb.base/inferior-died.exp:if { ![support_displaced_stepping] } { gdb/testsuite/gdb.base/step-over-syscall.exp: if {$displaced == "on" && ![support_displaced_stepping]} { gdb/testsuite/gdb.mi/mi-watch-nonstop.exp:if { ![support_displaced_stepping] } { gdb/testsuite/gdb.mi/mi-ns-stale-regcache.exp:if { ![support_displaced_stepping] } { gdb/testsuite/gdb.mi/mi-nonstop.exp:if { ![support_displaced_stepping] } { gdb/testsuite/gdb.mi/mi-nsmoribund.exp:if { ![support_displaced_stepping] } { gdb/testsuite/gdb.mi/mi-nsintrall.exp:if { ![support_displaced_stepping] } { gdb/testsuite/gdb.mi/mi-nsthrexec.exp:if { ![support_displaced_stepping] } { gdb/testsuite/gdb.mi/mi-nonstop-exit.exp:if { ![support_displaced_stepping] } { gdb/testsuite/gdb.multi/watchpoint-multi.exp:if [support_displaced_stepping] { gdb/testsuite/gdb.python/py-evthreads.exp:if { ![support_displaced_stepping] } { gdb/testsuite/gdb.threads/step-over-lands-on-breakpoint.exp: if { $displaced != "off" && ![support_displaced_stepping] } { gdb/testsuite/gdb.threads/interrupt-while-step-over.exp: if { ${displaced-stepping} != "off" && ![support_displaced_stepping] } { gdb/testsuite/gdb.threads/step-over-trips-on-watchpoint.exp: if { $displaced != "off" && ![support_displaced_stepping] } { 2022-05-19 Simon Marchi gdbsupport: fix path_join crash with -std=c++17 and -D_GLIBCXX_DEBUG When building GDB with -std=c++17 and -D_GLIBCXX_DEBUG=1, I get: $ ./gdb -nx --data-directory=data-directory -q -ex "maint selftest path_join" /usr/include/c++/11.2.0/string_view:233: constexpr const value_type& std::basic_string_view<_CharT, _Traits>::operator[](std::basic_string_view<_CharT, _Traits>::size_type) const [with _CharT = char; _Traits = std::char_traits; std::basic_string_view<_CharT, _Traits>::const_reference = const char&; std::basic_string_view<_CharT, _Traits>::size_type = long unsigned int]: Assertion '__pos < this->_M_len' failed. The problem is that we're passing an empty string_view to IS_ABSOLUTE_PATH. IS_ABSOLUTE_PATH accesses [0] on that string_view, which is out-of-bounds. The reason this is not seen with -std less than c++17 is that our local copy of string_view (used with C++ < 17) does not have the assert in operator[], as that wouldn't work in a constexpr method: https://gitlab.com/gnutools/binutils-gdb/-/blob/5890af36e5112bcbb8d7555e63570f68466e6944/gdbsupport/gdb_string_view.h#L180 IS_ABSOLUTE_PATH is normally used with null-terminated string. It's fine to pass an empty null-terminated string to IS_ABSOLUTE_PATH, because index 0 in such a string is valid. But not with an empty string_view. Fix that by avoiding the "call" to IS_ABSOLUTE_PATH if the string_view is empty. Change-Id: Idf4df961b63f513b3389235e93814c02b89ea32e 2022-05-19 Jan Beulich Arm64: force emission of ILP32-dependent relocs Like the placeholder types added in 04dfe7aa5217 ("Arm64: follow-on to PR gas/27217 fix"), these are also placeholders which are subsequently resolved (albeit later, hence this being a separate issue). As for the resolved types 1 is returned, these pseudo-relocs should also have 1 returned to force retaining of the [eventual] relocations. This is also spelled out individually for each of them in md_apply_fix(). 2022-05-19 Jan Beulich COFF: use hash for string table also when copying / stripping Otherwise the string table may grow and hence e.g. change a final binary (observed with PE/COFF ones) even if really there's no change. Doing so in fact reduces the overall amount of code, and in particular the number of places which need to remain in sync. Afaics there's no real equivalent to the "traditional_format" field used when linking, so hashing is always enabled when copying / stripping. 2022-05-19 Jan Beulich COFF/PE: keep linker version during objcopy / strip Neither of the tools is really a linker, so whatever was originally recorded should be retained rather than being overwritten by these tools' versions. COFF/PE: don't leave zero timestamp after objcopy / strip Fill the timestamp field suitably for _bfd_XXi_only_swap_filehdr_out(). Instead of re-arranging the present if(), fold this logic with that of copying the optional header. 2022-05-19 Jan Beulich COFF: make objcopy / strip honor --keep-file-symbols So far this option had no effect when used together with e.g. --strip-debug. Set BSF_FILE on these symbols to change that. While altering this also join two adjacent blocks of case labeled statements with identical code. 2022-05-19 Jan Beulich don't over-align file positions of PE executable sections When a sufficiently small alignment was specified via --file-alignment, individual section alignment shouldn't affect placement within the file. This involves first of all clearing D_PAGED for images when section and file alignment together don't permit paging of the image. The involved comparison against COFF_PAGE_SIZE in turn helped point out (through a compiler warning) that 'page_size' should be of unsigned type (as in particular FileAlignment is). This yet in turn pointed out a dubious error condition (which is being deleted). For the D_PAGED case I think the enforced file alignment may still be too high, but I'm wary of changing that logic without knowing of possible corner cases. Furthermore file positions in PE should be independent of the alignment recorded in section headers anyway. Otherwise there are e.g. anomalies following commit 6f8f6017a0c4 ("PR27567, Linking PE files adds alignment section flags to executables") in that linking would use information a subsequent processing step (e.g. stripping) wouldn't have available anymore, and hence a binary could change in that 2nd step for no actual reason. (Similarly stripping a binary linked with a linker pre-dating that commit would change the binary again when stripping it a 2nd time.) 2022-05-19 Yvan Roux _bfd_real_fopen should not use ccs parameter on Windows PR 25713 * bfdio.c (_bfd_real_fopen): Delete ccs string. 2022-05-19 Tsukasa OI RISC-V: Fix canonical extension order (K and J) This commit fixes canonical extension order to follow the RISC-V ISA Manual draft-20210402-1271737 or later. bfd/ChangeLog: * elfxx-riscv.c (riscv_recognized_prefixed_ext): Fix "K" extension prefix to be placed before "J". 2022-05-19 GDB Administrator Automatic date update in version.in 2022-05-18 John Baldwin Use aarch64_features to describe register features in target descriptions. Replace the sve bool member of aarch64_features with a vq member that holds the vector quotient. It is zero if SVE is not present. Add std::hash<> specialization and operator== so that aarch64_features can be used as a key with std::unordered_map<>. Change the various functions that create or lookup aarch64 target descriptions to accept a const aarch64_features object rather than a growing number of arguments. Replace the multi-dimension tdesc_aarch64_list arrays used to cache target descriptions with unordered_maps indexed by aarch64_feature. 2022-05-18 Jan Beulich Arm64: follow-on to PR gas/27217 fix PR gas/27217 Prior to trying to address PR gas/28888 I noticed anomalies in how certain insns would / wouldn't be affected in similar ways. Commit eac4eb8ecb26 ("Fix a problem assembling AArch64 sources when a relocation is generated against a symbol that has a defined value") had two copy-and-paste mistakes, passing the wrong type to aarch64_force_reloc(). It further failed to add placeholder relocation types to that function's block of case labels leading to a return of 1. While not of interest for aarch64_force_relocation() (these placeholders are resolved right in parse_operands()), calls to aarch64_force_reloc() happen before that resolution would take place. 2022-05-18 Nick Clifton Fix compile time warning building gold with Clang-14. * int_encoding.cc (get_length_as_unsigned_LEB_128): Remove current_length variable. 2022-05-18 Victor Do Nascimento oops - forgot changelog entry for the previous delta. arm: Add unwind support for mixed register lists * config/tc-arm.c (parse_reg_list): Add handling of mixed register types. (reg_names): Enumerate pseudoregister according to mapped physical register number. (s_arm_unwind_save_pseudo): Modify function signature. (s_arm_unwind_save_core): Likewise. (s_arm_unwind_save_mixed): New function. (s_arm_unwind_save): Generate register list mask to pass to nested functions. * testsuite/gas/arm/unwind-pacbti-m.s: Expand test for mixed register type lists. * testsuite/gas/arm/unwind-pacbti-m.d: Likewise. * testsuite/gas/arm/unwind-pacbti-m-readelf.d: Likewise. 2022-05-18 Carl Love PowerPC: bp-permanent.exp, kill-after-signal fix Fix changes that didn't make it into commit: dd9cd55e990bcc9f8448cac38d242d53974b3604. Fix missing -wrap on gdb_test_multiple in gdb.base/kill-after-signal.exp that is causing regression test on x86_64-linux with taskset -c 0. 2022-05-18 Yichao Yu [AArch64] Return the regnum for PC (32) on aarch64 This will allow the unwind info to explicitly specify a different value for the return address from the link register. Such usage, although uncommon, is valid and useful for signal frames. It is also supported by aadwarf64 from ARM (Note 9 in [1]). Ref https://sourceware.org/pipermail/gdb/2022-May/050091.html [1] https://github.com/ARM-software/abi-aa/blob/2022Q1/aadwarf64/aadwarf64.rst#dwarf-register-names 2022-05-18 Jan Beulich x86: shrink op_riprel It is only ever initialized from a boolean, so it as well as related variables' types can simply be bool and there's no masking to 32 bits needed in set_op(). 2022-05-18 Nick Clifton Add a --no-weak option to nm. PR 29135 * nm.c (non_weak): New variable. (filter_symbols): When non-weak is true, ignore weak symbols. (long_options): Add --no-weak. (usage): Mention --no-weak. (main): Handle -W/--no-weak. * doc/binutils.texi: Document new feature. * NEWS: Mention the new feature. * testsuite/binutils-all/nm.exp: Add test of new feature. * testsuite/binutils-all/no-weak.s: New test source file. 2022-05-18 Pedro Alves Support -prompt and -lbl in gdb_test This teaches gdb_test to forward the -prompt and -lbl options to gdb_test_multiple. The option parsing is done with parse_args. As a cleanup, instead of using llength and lindex to get at the positional arguments, use lassign, and check whether the corresponding variable is empty. Convert gdb.base/ui-redirect.exp and gdb.xml/tdesc-reload.exp to use gdb_test -prompt/-lbl instead of gdb_test_multiple as examples. Change-Id: I243e1296d32c05a421ccef30b63d43a89eaeb4a0 2022-05-18 Luis Machado Remove unused DWARF PAUTH registers The AARCH64_DWARF_PAUTH_DMASK and AARCH64_DWARF_PAUTH_CMASK DWARF registers never made their way into the aadwarf64. The following patch removes these constants and their use. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26295 2022-05-18 Luis Machado Rename PAUTH_RA_STATE to RA_SIGN_STATE The aadwarf64 [1] names this register RA_SIGN_STATE, so update the code to use the same name. [1] https://github.com/ARM-software/abi-aa/blob/main/aadwarf64/aadwarf64.rst 2022-05-18 Tom de Vries [gdb/testsuite] Simplify unknown lang testing in gdb.base/parse_number.exp Move testing of language unknown out of the $supported_archs loop in gdb.base/parse_number.exp. This reduces total amount of tests from 18466 to 17744. Tested on x86_64-linux. 2022-05-18 Tom de Vries [gdb/testsuite] Use hex_for_lang in gdb.base/parse_number.exp In gdb.base/parse_number.exp, add a new proc hex_for_lang that formats a hex number appropriately for a given language. Tested on x86_64-linux. 2022-05-18 Tom de Vries [gdb/tdep] Add gdb/syscalls/update-linux-from-src.sh Add a new script gdb/syscalls/update-linux-from-src.sh, that can be used to generate *-linux.xml.in files from linux kernel sources, like so: ... $ ./update-linux-from-src.sh ~/upstream/linux-stable.git Skipping aarch64-linux.xml.in, no syscall.tbl Generating amd64-linux.xml.in Skipping arm-linux.xml.in, use arm-linux.py instead Skipping bfin-linux.xml.in, no longer supported Generating i386-linux.xml.in Generating mips-n32-linux.xml.in Generating mips-n64-linux.xml.in Generating mips-o32-linux.xml.in Generating ppc64-linux.xml.in Generating ppc-linux.xml.in Generating s390-linux.xml.in Generating s390x-linux.xml.in Generating sparc64-linux.xml.in Generating sparc-linux.xml.in ... Update *-linux.xml.in and *-linux.xml using linux kernel tag v5.18-rc6. 2022-05-18 Tamar Christina AArch64: Enable FP16 by default for Armv9-A. In Armv9-A SVE is mandatory, and for SVE FP16 is mandatory. This fixes a disconnect between GCC and binutils where GCC has FP16 on by default and gas doesn't. include/ChangeLog: 2022-05-16 Tamar Christina * opcode/aarch64.h (AARCH64_ARCH_V9_FEATURES): Add AARCH64_FEATURE_F16. 2022-05-18 Jan Beulich gas: avoid octal numbers being accepted when processing .linefile Compilers would put decimal numbers there, so I think we should treat finding octal numbers the same as finding bignums - ignore them as actually being comments of some very specific form. 2022-05-18 Jan Beulich gas: avoid bignum related errors when processing .linefile Any construct which to the scrubber looks like a C preprocessor line/file "directive" is converted to .linefile, but the amount of checking the scrubber does is minimal (albeit it does let through only decimal digits for the line part of the contruct). Since the scrubber conversion is further tied to # being a line comment character, anything which upon closer inspection turns out not to be a line/file "directive" is supposed to be treated as a comment, i.e. ignored. Therefore we cannot use get_absolute_expression(), as this may raise errors. Open- code the function instead, treating everything not resulting in O_constant as a comment as well. Furthermore also bounds-check the parsed value. This bounds check tries to avoid implementation defined behavior (which may be the raising of an implementation defined signal), but for now makes the assumption that int has less than 64 bits. The way bfd_signed_vma (which is what offsetT aliases) is defined in bfd.h for the BFD64 case I cannot really see a clean way of avoiding this assumption. Omitting the #ifdef, otoh, would risk "condition is always false" warnings by compilers. Convert get_linefile_number() to return bool at this occasion as well. 2022-05-18 Jan Beulich gas: fold do_repeat{,_with_expander}() do_repeat_with_expander() already deals with the "no expander" case quite fine, so there's really little point having two functions. What it lacks compared with do_repeat() is a call to sb_build(), which can simply be moved (and the then redundant sb_new() be avoided). Along with this moving also flip if the main if()'s condition such that the "no expander" case is handled first. gas: don't ignore .linefile inside false conditionals When assembling code previously pre-processed by a C compiler, long enough comments may have been collapsed into "# " constructs. If we skip these, line numbers (and possibly even file names) will be off / wrong in both diagnostics and debug info. gas: simplify ignore_input() First of all convert to switch(), in preparation of adding another directive here which may not be ignored. While doing so drop dead code: A string the first two characters of which do not match "if" also wont match "ifdef" or "ifndef". gas: tweak .irp and alike file/line handling for M68K/MRI In commit 2ee1792bec22 ("gas: further adjust file/line handling for .irp and alike") I neglected the need to omit the leading . in M68K/MRI mode. 2022-05-18 Xi Ruoyao gold: don't invoke IA32 syscall in x86_64 assembly testcase pr17704a_test.s is a x86_64 assembly file, but it invokes IA32 exit syscall with "int 0x80". This causes a segfault on kernels with CONFIG_IA32_EMULATION disabled. gold/ * testsuite/pr17704a_test.s (_start): Invoke x86_64 exit syscall instead of its IA32 counterpart. 2022-05-18 GDB Administrator Automatic date update in version.in 2022-05-17 Nikolaos Chatzikonstantinou Fix typo in info page 2022-05-17 Pedro Alves Fix gdb.python/py-connection.exp with remote targets After the patch to make gdb_test's question non-optional when specified, gdb.python/py-connection.exp started failing like so: $ make check TESTS="gdb.python/py-connection.exp" RUNTESTFLAGS="--target_board=native-gdbserver" (gdb) PASS: gdb.python/py-connection.exp: info connections while the connection is still around disconnect^M Ending remote debugging.^M (gdb) FAIL: gdb.python/py-connection.exp: kill the inferior The problem is that "disconnect" when debugging with the native target asks the user whether to kill the program, while with remote targets, it doesn't. Fix it by explicitly killing before disconnecting. Tested with --target_board unix, native-gdbserver, and native-extended-gdbserver. Change-Id: Icd85015c76deb84b71894715d43853c1087eba0b 2022-05-17 Felix Willgerodt gdb, btrace: Throw an error for empty recordings when replaying starts. This makes record_btrace_start_replaying() more consistent, as it already errors out e.g. on a recording with only gaps. 2022-05-17 Pedro Alves Make gdb_test's question non-optional if specified gdb_test supports handling scenarios where GDB asks a question before finishing handling some command. The full prototype of gdb_test is: # gdb_test COMMAND PATTERN MESSAGE QUESTION RESPONSE However, QUESTION is a question that GDB _may_ ask, not one that GDB _must_ ask: # QUESTION is a question GDB may ask in response to COMMAND, like # "are you sure?" # RESPONSE is the response to send if QUESTION appears. If GDB doesn't raise the question, the test still passes. I think that this is a misfeature. If GDB regresses and stops asking a question, the testsuite won't notice. So I think that if a QUESTION is specified, gdb_test should ensure it comes out of GDB. Running the testsuite exposed a number of tests that pass QUESTION/RESPONSE to GDB, but no question comes out. The previous commits fixed them all, so this commit changes gdb_test's behavior. A related issue is that gdb_test doesn't enforce that if you specify QUESTION, that you also specify RESPONSE. I.e., you should pass 1, 2, 3, or 5 arguments to gdb_test, but never 4, or more than 5. Making gdb_test detect bogus arguments actually regressed some testcases, also all fixed in previous commits. Change-Id: I47c39c9034e6a6841129312037a5ca4c5811f0db 2022-05-17 Pedro Alves gdb.base/skip.exp: Don't abuse gdb_test's question support gdb.base/skip.exp abuses gdb_test's support for answering a GDB question to do this: # With gcc 9.2.0 we jump once back to main before entering foo here. # If that happens try to step a second time. gdb_test "step" "foo \\(\\) at.*" "step 3" \ "main \\(\\) at .*\r\n$gdb_prompt " "step" After a patch later in this series, gdb_test will FAIL if GDB does NOT issue the question, so this test would start failing on older GCCs. Switch to using gdb_test_multiple instead. There are three spots in the file that have the same pattern, and they're actually in a sequence of commands that is repeated those 3 times. Factor all that out to a procedure. I don't have gcc 9.2 handy, but I do have gcc 6.5, and that one is affected as well, so update the comment. Change-Id: If0a7e3cdf5191b4eec95ce0c8845c3a4d801c39e 2022-05-17 Pedro Alves Avoid having to unload file in gdb.server/connect-with-no-symbol-file.exp gdb.server/connect-with-no-symbol-file.exp's connect_no_symbol_file does: gdb_test "file" ".*" "discard symbol table" \ {Discard symbol table from `.*'\? \(y or n\) } "y" A following patch will make gdb_test expect the question out of GDB if one is passed down as argument to gdb_test. With that, this test starts failing. This is because connect_no_symbol_file is called in a loop, and the first time around, there's a loaded file, so "file" asks the "Discard symbol table ... ?" question, while in the following iterations there's no file, so there's no question. Fix this by not loading a file into GDB in the first place. Change-Id: I810c036b57842c4c5b47faf340466b0d446d1abc 2022-05-17 Pedro Alves Fix bogus gdb_test invocations A following patch will make gdb_test error out if bogus arguments are passed, which exposed bugs in a few testcases: - gdb.python/py-parameter.exp, passing a spurious "1" as extra parameter, resulting in: ERROR: Unexpected arguments: {set test-file-param bar.txt} {The name of the file has been changed to bar.txt} {set new file parameter} 1 - gdb.python/py-xmethods.exp, a missing test message, resulting in the next gdb_test being interpreted as message, question and response! With the enforcing patch, this was caught with: ERROR: Unexpected arguments: {p g.mul('a')} {From Python G<>::mul.*} gdb_test {p g_ptr->mul('a')} {From Python G<>::mul.*} {after: g_ptr->mul('a')} - gdb.base/pointers.exp, missing a quote. Change-Id: I66f2db4412025a64121db7347dfb0b48240d46d4 2022-05-17 Pedro Alves gdb.base/scope.exp: Remove bogus gdb_test questions This test is abusing the QUESTION/RESPONSE feature to send an alternative command to GDB if the first command fails. Like so: gdb_test "print 'scope0.c'::filelocal" \ "\\\$$decimal = 1" "print 'scope0.c'::filelocal at main" \ "No symbol \"scope0.c\" in current context.*" \ "print '$srcdir/$subdir/scope0.c'::filelocal" So if 'scope0.c' doesn't work, we try again with '$srcdir/$subdir/scope0.c'. I strongly suspect this is really an obsolete test. I think that if '$srcdir/$subdir/scope0.c' works, then 'scope0.c' should have worked too, thus I'd think that if we pass due to the question path, then it's a bug. So just remove the question part passed to gdb_test. Change-Id: I2acc99285f1d519284051b49693b5441fbdfe3cd 2022-05-17 Pedro Alves Remove gdb_test questions that GDB doesn't ask Change-Id: Ib2616dc883e9dc9ee100f6c86d83a921a0113c16 2022-05-17 Nelson Chu RISC-V: Added half-precision floating-point v1.0 instructions. bfd/ * elfxx-riscv.c (riscv_implicit_subsets): Added implicit f and zicsr for zfh. (riscv_supported_std_z_ext): Added default v1.0 version for zfh. (riscv_multi_subset_supports): Handle INSN_CLASS_ZFH, INSN_CLASS_D_AND_ZFH and INSN_CLASS_Q_AND_ZFH. gas/ * config/tc-riscv.c (FLT_CHARS): Added "hH". (macro): Expand Pseudo M_FLH and M_FSH. (riscv_pseudo_table): Added .float16 directive. * testsuite/gas/riscv/float16-be.d: New testcase for .float16. * testsuite/gas/riscv/float16-le.d: Likewise. * testsuite/gas/riscv/float16.s: Likewise. * testsuite/gas/riscv/fp-zfh-insns.d: New testcase for zfh. * testsuite/gas/riscv/fp-zfh-insns.s: Likewise. include/ * opcode/riscv-opc.h: Added MASK and MATCH encodings for zfh. * opcode/riscv.h: Added INSN_CLASS and pseudo macros for zfh. opcodes/ * riscv-opc.c (riscv_opcodes): Added zfh instructions. 2022-05-17 GDB Administrator Automatic date update in version.in 2022-05-16 Ilya Leoshkevich IBM zSystems: Fix left-shifting negative PCRel32 values (PR gas/29152) s390_insert_operand ()'s val, min and max are encoded PCRel32 values and need to be left-shifted by 1 before being shown to the user. Left-shifting negative values is undefined behavior in C, but the current code does not try to prevent it, causing UBSan to complain. Fix by casting the values to their unsigned equivalents before shifting. 2022-05-16 Pedro Alves Reindent gdbsupport/event-loop.cc:handle_file_event The handle_file_event function has a few unnecessary {} lexical blocks, presumably because they were originally if blocks, and the conditions were removed, or something along those lines. Remove the unnecessary blocks, and reindent. Change-Id: Iaecbe5c9f4940a80b81dbbc42e51ce506f6aafb2 2022-05-16 Pedro Alves gdbsupport/event-loop.cc: simplify !HAVE_POLL paths gdbsupport/event-loop.cc throughout handles the case of use_poll being true on a system where HAVE_POLL is not defined, by calling internal_error if that situation ever happens. Simplify this by moving the "use_poll" global itself under HAVE_POLL, so that it's way more unlikely to ever end up in such a situation. Then, move the code that checks the value of use_poll under HAVE_POLL too, and remove the internal_error calls. Like, from: if (use_poll) { #ifdef HAVE_POLL // poll code #else internal_error (....); #endif /* HAVE_POLL */ } else { // select code } to #ifdef HAVE_POLL if (use_poll) { // poll code } else #endif /* HAVE_POLL */ { // select code } While at it, make use_poll be a bool. The current code is using unsigned char most probably to save space, but I don't think it really matters here. Co-Authored-By: Youling Tang Change-Id: I0dd74fdd4d393ccd057906df4cd75e8e83c1cdb4 2022-05-16 Eli Zaretskii gdb: Fix typo in last change in gdb.texinfo gdb: Document the 'metadata' styling in GDB displays. The 'metadata' styling was never documented in the GDB manual. This fills that gap. 2022-05-16 Tom Tromey Fix Ada exception regression on Windows The breakpoint c++-ification series introduced another bug in Ada -- it caused "catch exception" and related commands to fail on Windows. The problem is that the re_set method calls the wrong superclass method, so the breakpoint doesn't get correctly re-set when the runtime offsets change. This patch fixes the problem. 2022-05-16 Bruno Larsen gdb/testsuite: fix "continue outside of loop" TCL errors Many test cases had a few lines in the beginning that look like: if { condition } { continue } Where conditions varied, but were mostly in the form of ![runto_main] or [skip_*_tests], making it quite clear that this code block was supposed to finish the test if it entered the code block. This generates TCL errors, as most of these tests are not inside loops. All cases on which this was an obvious mistake are changed in this patch. 2022-05-16 GDB Administrator Automatic date update in version.in 2022-05-15 GDB Administrator Automatic date update in version.in 2022-05-14 GDB Administrator Automatic date update in version.in 2022-05-13 Tom Tromey Remove unused field cooked_index::m_start cooked_index::m_start is unused and can be removed. I think this was a leftover from a previous approach in the index finalization code, and then when rewriting it I forgot to remove it. Tested by rebuilding. 2022-05-13 Tom Tromey Implement pid_to_exec_file for Windows in gdbserver I noticed that gdbserver did not implement pid_to_exec_file for Windows, while gdb did implement it. This patch moves the code to nat/windows-nat.c, so that it can be shared. This makes the gdbserver implementation trivial. Remove windows_process_info::id I noticed that windows_process_info::id is only used by gdbserver, and not really necessary. This patch removes it. Constify target_pid_to_exec_file This changes target_pid_to_exec_file and target_ops::pid_to_exec_file to return a "const char *". I couldn't build many of these targets, but did examine the code by hand -- also, as this only affects the return type, it's normally pretty safe. This brings gdb and gdbserver a bit closer, and allows for the removal of a const_cast as well. Put corefile-run.core into test subdirectory I noticed that corefile-run.core ends up in the 'runtest' directory. It's better, when at all possible, for test files to end up in the test's designated subdirectory. This patch makes this change. 2022-05-13 Tom Tromey Do not double-read minimal symbols for PE COFF This changes coffread.c to avoid re-reading minimal symbols when possible. This only works when there are no COFF symbols to be read, but at least for my mingw builds of gdb, this seems to be the case. Tested using the AdaCore internal test suite on Windows. I also did some local builds to ensure that no warnings crept in. 2022-05-13 Pedro Alves Fix "gdb --write" with core files If you load a core file into GDB with the --write option, or "set write on" (equivalent), and then poke memory expecting it to patch the core binary, you'll notice something odd -- the write seems to succeed, but in reality, it doesn't. The value you wrote doesn't persist. Like so: $ gdb -q --write -c testsuite/outputs/gdb.base/patch/gcore.test [New LWP 615986] Core was generated by `/home/pedro/gdb/build/gdb/testsuite/outputs/gdb.base/patch/patch'. Program terminated with signal SIGTRAP, Trace/breakpoint trap. #0 0x0000555555555131 in ?? () (gdb) p *(unsigned char *)0x0000555555555131 = 1 $1 = 1 '\001' (gdb) p *(unsigned char *)0x0000555555555131 $2 = 185 '\271' (gdb) Diffing hexdumps of before/after patching, reveals that a "0x1" was actually written somewhere in the file. The problem is that the "0x1" was written at the wrong offset in the file... That happens because _bfd_elf_set_section_contents does this to seek to the section's offset: pos = hdr->sh_offset + offset; if (bfd_seek (abfd, pos, SEEK_SET) != 0 || bfd_bwrite (location, count, abfd) != count) return false; ... and 'hdr->sh_offset' is zero, so we seek to just OFFSET, which is incorrect. The reason 'hdr->sh_offset' is zero is that kernel-generated core files normally don't even have a section header table (gdb-generated ones do, but that's more an accident than a feature), and indeed elf_core_file_p doesn't even try to read sections at all: /* Core files are simply standard ELF formatted files that partition the file using the execution view of the file (program header table) rather than the linking view. In fact, there is no section header table in a core file. The process status information (including the contents of the general register set) and the floating point register set are stored in a segment of type PT_NOTE. We handcraft a couple of extra bfd sections that allow standard bfd access to the general registers (.reg) and the floating point registers (.reg2). */ bfd_cleanup elf_core_file_p (bfd *abfd) Changing _bfd_elf_set_section_contents from: pos = hdr->sh_offset + offset; to: pos = section->filepos + offset; fixes it. If we do that however, the tail end of _bfd_elf_set_section_contents ends up as a copy of _bfd_generic_set_section_contents, so just call the latter, thus eliminating some duplicate code. New GDB testcase included, which exercises both patching an executable and patching a core file. Patching an executable already works without this fix, because in that case BFD reads in the sections table. Still, we had no testcase for that yet. In fact, we have no "set write on" testcases at all, this is the first one. Tested on x86-64 GNU/Linux, gdb, ld, binutils, and gas. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=18227 Change-Id: I0f49f58b48aabab2e269f2959b8fd8a7fe36fdce 2022-05-13 Alan Modra Import libiberty from gcc sim: remove use of PTR PTR will soon disappear from ansidecl.h. Remove uses in sim. Where a PTR cast is used in assignment or function args to a void* I've simply removed the unnecessary (in C) cast rather than replacing with (void *). 2022-05-13 GDB Administrator Automatic date update in version.in 2022-05-13 Alan Modra gdb: remove use of PTR PTR will disappear from ansidecl.h and libiberty on the next import from gcc. Remove current uses in gdb. 2022-05-12 Tom de Vries [gdb/testsuite] Fix gdb.cp/break-f-std-string.cc with older gcc When running test-case gdb.cp/break-f-std-string.exp on openSUSE Leap 15.3 with system gcc 7.5.0, I run into: ... (gdb) whatis /r std::string^M No symbol "string" in namespace "std".^M (gdb) FAIL: gdb.cp/break-f-std-string.exp: _GLIBCXX_USE_CXX11_ABI=1: \ whatis /r std::string ... The same for gcc 8.2.1, but it passes with gcc 9.3.1. At source level (as we can observe in the .ii file with -save-temps) we have indeed: ... namespace std { namespace __cxx11 { typedef basic_string string; } } ... while with gcc 9.3.1, we have instead: ... namespace std { namespace __cxx11 { ... } typedef basic_string string; } ... due to gcc commit 33b43b0d8cd ("Define std::string and related typedefs outside __cxx11 namespace"). Fix this by adding the missing typedef for gcc version 5 (the first version to have the dual abi) to 8 (the last version missing aforementioned gcc commit). Tested on x86_64-linux, with: - system gcc 7.5.0 - gcc 4.8.5, 8.2.1, 9.3.1, 10.3.0, 11.2.1 - clang 8.0.1, 12.0.1 2022-05-12 Alan Modra Fix an illegal memory access when creating DLLs. PR 29006 * pe-dll.c (dll_name): Delete, replacing with.. (dll_filename): ..this, moved earlier in file. (generate_edata): Delete parameters. Don't set up dll_name here.. (pe_process_import_defs): ..instead set up dll_filename and dll_symname here before returning. (dll_symname_len): Delete write-only variable. (pe_dll_generate_implib): Don't set up dll_symname here. 2022-05-12 Mark Wielaard gdb: Workaround stringop-overread warning in debuginfod-support.c on powerpc64 Just like on s390x with g++ 11.2.1, ppc64le with g++ 11.3.1 produces a spurious warning for stringop-overread in debuginfod_is_enabled for url_view. Also suppress it on powerpc64. gdb/ChangeLog: * debuginfod-support.c (debuginfod_is_enabled): Use DIAGNOSTIC_IGNORE_STRINGOP_OVERREAD on powerpc64. 2022-05-12 Luis Machado Make gdb.ada/float-bits.exp more generic There are assumptions in the test about the long double format being used. While the results are OK for i387 128-bit long doubles, it is not correct for IEEE quad 128-bit long doubles. Also, depending on the target (64-bit/32-bit), long doubles may not be available at all. And it may be the case that the compiler for a 64-bit target doesn't support 128-bit long doubles, but GDB might still support it internally. Lastly, not every long double format has invalid values. Some formats consider all values as valid floating point numbers. These divergences cause the following FAIL's on aarch64/arm: FAIL: gdb.ada/float-bits.exp: print val_long_double FAIL: gdb.ada/float-bits.exp: print val_long_double after assignment With the above in mind, extend the test a little so it behaves well on different architectures and so it works with different long double formats. Main changes: - Use long double values appropriate for the long double format. - Test long double assignment to compiler-generated long double variables. - Test long double assignment to GDB internal variables. Tested on x86_64 (16 PASS), i686 (16 PASS), aarch64 (12 PASS) and arm (9 PASS). 2022-05-12 Tom de Vries [gdb/tdep] Improve gdb/syscalls/update-linux.sh Fix two things in update-linux.sh: - remove use of unnecessary tmp file - inline gen-header.py into update-linux.sh Tested on x86_64-linux. 2022-05-12 Tom de Vries [gdb/testsuite] Fix gdb.dwarf2/dw2-out-of-range-end-of-seq.exp on aarch64 On aarch64-linux, with test-case gdb.dwarf2/dw2-out-of-range-end-of-seq.exp I run into: ... (gdb) run ^M Starting program: dw2-out-of-range-end-of-seq ^M ^M Program received signal SIGILL, Illegal instruction.^M main () at src/gdb/testsuite/gdb.dwarf2/main.c:1^M 1 /* This testcase is part of GDB, the GNU debugger.^M (gdb) FAIL: gdb.dwarf2/dw2-out-of-range-end-of-seq.exp: runto: run to main ... There are two problems here: - the test-case contains a hardcoded "DW_LNS_advance_pc 1" which causes the breakpoint pointing in the middle of an insn - the FAIL triggers on aarch64-linux, but not on x86_64-linux, because the test-case uses 'main_label' as the address of the first and only valid entry in the line table, and: - on aarch64-linux, there's no prologue, so main_label and main coincide, while - on x86_64-linux, there's a prologue, so main_label is different from main. Fix these problems by: - eliminating the use of "DW_LNS_advance_pc 1", and using "DW_LNE_set_address $main_end" instead, and - eliminating the use of main_label, using "DW_LNE_set_address $main_start" instead. Tested on both x86_64-linux and aarch64-linux. 2022-05-12 Alan Modra cgen: increase buffer for hash_insn_list As was done for hash_insn_array in commit d3d1cc7b13b4. * cgen-dis.c (hash_insn_list): Increase size of buf. Assert size is large enough. 2022-05-12 Alan Modra PR29142, segv in ar with empty archive and libdeps specified PR 29142 * ar.c (main): Properly handle libdeps for zero file_count. 2022-05-12 Alan Modra Re: IBM zSystems: Accept (. - 0x100000000) PCRel32 operands The new test failed on s390-linux due to bfd_sprintf_vma trimming output to 32 bits for 32-bit targets. The test was faulty anyway, expecting zero as the min end of the range is plainly wrong, but that's what you get if you cast min to int. * config/tc-s390.c (s390_insert_operand): Print range error using PRId64. * testsuite/gas/s390/zarch-z900-err.l: Correct expected output. 2022-05-12 GDB Administrator Automatic date update in version.in 2022-05-11 Tom de Vries [gdb/testsuite] Fix gdb.base/catch-syscall.exp with --with-expat=no When doing a gdb build with --with-expat=no, I run into: ... (gdb) PASS: gdb.base/catch-syscall.exp: determine pipe syscall: \ continue to breakpoint: before pipe call catch syscall pipe^M Unknown syscall name 'pipe'.^M (gdb) PASS: gdb.base/catch-syscall.exp: determine pipe syscall: \ catch syscall pipe catch syscall pipe2^M Unknown syscall name 'pipe2'.^M (gdb) PASS: gdb.base/catch-syscall.exp: determine pipe syscall: \ catch syscall pipe2 continue^M Continuing.^M [Detaching after vfork from child process 18538]^M [Inferior 1 (process 18537) exited normally]^M (gdb) FAIL: gdb.base/catch-syscall.exp: determine pipe syscall: continue ... This is a regression since recent commit 5463a15c18b ("[gdb/testsuite] Handle pipe2 syscall in gdb.base/catch-syscall.exp"). Fix this by using pipe/pipe2 syscall numbers instead. Tested on x86_64-linux. 2022-05-11 Nick Clifton nm: use -U as an alias for --defines-only, in line with llvm-nm 2022-05-11 Tom de Vries [gdb/testsuite] Fix gdb.base/catch-syscall.exp without --enable-targets When doing a gdb build without --enable-targets, I run into: ... (gdb) UNSUPPORTED: gdb.base/catch-syscall.exp: multiple targets: \ s390:31-bit vs s390:64-bit: set architecture s390:64-bit delete breakpoints^M (gdb) info breakpoints^M No breakpoints or watchpoints.^M (gdb) break -qualified main^M No symbol table is loaded. Use the "file" command.^M Make breakpoint pending on future shared library load? (y or [n]) n^M (gdb) FAIL: gdb.base/catch-syscall.exp: gdb_breakpoint: set breakpoint at main ... The problem is that due to recent commit e21d8399303 ("[gdb/testsuite] Remove target limits in gdb.base/catch-syscall.exp") "clean_restart $binfile" no longer is called at the end of test_catch_syscall_multi_arch. Fix this by moving "clean_restart $binfile" back to test_catch_syscall_multi_arch. Tested on x86_64-linux. 2022-05-11 Tom de Vries [gdb/testsuite] Fix gdb.base/maint.exp on powerpc64le On powerpc64le-linux, I ran into: ... FAIL: gdb.base/maint.exp: maint print objfiles: symtabs ... The problem is that: - the "Cooked index in use" line occurs twice in the gdb output: - once for exec maint, and - once for "Object file system-supplied DSO". - the matching of the second "Cooked index in use" also consumes the "Symtabs:" string, and consequently the corresponding clause does not trigger and $symtabs remains 0. Fix this by limiting the output of the command to the exec. Tested on x86_64-linux and powerpcle-linux. 2022-05-11 Tom de Vries [gdb/tdep] Update syscalls/{ppc64,ppc}-linux.xml Regenerate syscalls/{ppc64,ppc}-linux.xml on a system with 5.14 kernel. 2022-05-11 Tom de Vries [gdb/testsuite] Remove target limits in gdb.base/catch-syscall.exp In test-case gdb.base/catch-syscall.exp, proc test_catch_syscall_multi_arch we test for supported targets using istarget, like so: ... if { [istarget "i*86-*-*"] || [istarget "x86_64-*-*"] } { ... } elseif { [istarget "powerpc-*-linux*"] \ || [istarget "powerpc64*-linux*"] } { ... ... but the tests excercised there can all be executed if gdb is configured with --enable-targets=all. Rewrite the proc to iterate over all cases, and check if the test is supported by trying "set arch $arch1" and "set arch $arch2". Tested on x86_64-linux, with: - a gdb build with --enable-targets=all, and - a gdb build build with my usual --enable-targets setting (too long to include here) which means the sparc vs sparc:v9 case is unsupported. 2022-05-11 Tom de Vries [gdb/record] Handle statx system call When running test-case gdb.reverse/fstatat-reverse.exp with target board unix/-m32 on openSUSE Tumbleweed, I run into: ... (gdb) PASS: gdb.reverse/fstatat-reverse.exp: set breakpoint at marker2 continue^M Continuing.^M Process record and replay target doesn't support syscall number 383^M Process record: failed to record execution log.^M ^M Program stopped.^M 0xf7fc5555 in __kernel_vsyscall ()^M (gdb) FAIL: gdb.reverse/fstatat-reverse.exp: continue to breakpoint: marker2 ... The problems is that while with native we're trying to record these syscalls (showing strace output): ... openat(AT_FDCWD, "/", O_RDONLY|O_PATH) = 3 newfstatat(3, ".", {st_mode=S_IFDIR|0755, st_size=146, ...}, 0) = 0 ... with unix/-m32 we have instead: ... openat(AT_FDCWD, "/", O_RDONLY|O_PATH) = 3 statx(3, ".", AT_STATX_SYNC_AS_STAT|AT_NO_AUTOMOUNT, STATX_BASIC_STATS, \ {stx_mask=STATX_ALL|STATX_MNT_ID, stx_attributes=STATX_ATTR_MOUNT_ROOT, \ stx_mode=S_IFDIR|0755, stx_size=146, ...}) = 0 ... and statx is not supported. Fix this by adding support for recording syscall statx. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28461 2022-05-11 Alan Modra opcodes cgen: remove use of PTR Note that opcodes is regenerated with cgen commit d1dd5fcc38e reverted, due to failure of bpf to compile with that patch applied. .../opcodes/bpf-opc.c:57:11: error: conversion from ‘long unsigned int’ to ‘unsigned int’ changes value from ‘18446744073709486335’ to ‘4294902015’ [-Werror=overflow] 57 | 64, 64, 0xffffffffffff00ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } } plus other similar errors. cpu/ * mep.opc (print_tpreg, print_spreg): Delete unnecessary forward declarations. Replace PTR with void *. * mt.opc (print_dollarhex, print_pcrel): Delete forward decls. opcodes/ * bpf-desc.c, * bpf-dis.c, * cris-desc.c, * epiphany-desc.c, * epiphany-dis.c, * fr30-desc.c, * fr30-dis.c, * frv-desc.c, * frv-dis.c, * ip2k-desc.c, * ip2k-dis.c, * iq2000-desc.c, * iq2000-dis.c, * lm32-desc.c, * lm32-dis.c, * m32c-desc.c, * m32c-dis.c, * m32r-desc.c, * m32r-dis.c, * mep-desc.c, * mep-dis.c, * mt-desc.c, * mt-dis.c, * or1k-desc.c, * or1k-dis.c, * xc16x-desc.c, * xc16x-dis.c, * xstormy16-desc.c, * xstormy16-dis.c: Regenerate. 2022-05-11 GDB Administrator Automatic date update in version.in 2022-05-10 Youling Tang gdb: mips: Fix large-frame.exp test case failure $ objdump -d outputs/gdb.base/large-frame/large-frame-O2 0000000120000b20 : 120000b20: 67bdbff0 daddiu sp,sp,-16400 120000b24: ffbc4000 sd gp,16384(sp) 120000b28: 3c1c0002 lui gp,0x2 120000b2c: 679c8210 daddiu gp,gp,-32240 120000b30: 0399e02d daddu gp,gp,t9 120000b34: df998058 ld t9,-32680(gp) 120000b38: ffbf4008 sd ra,16392(sp) 120000b3c: 0411ffd8 bal 120000aa0 ... The disassembly of the above func function shows that we may use instructions such as daddiu/daddu, so add "daddiu $gp,$gp,n", "daddu $gp,$gp,$t9" and "daddu $gp,$t9,$gp" to the mips32_scan_prologue function to fix the large-frame.exp test case. Before applying the patch: backtrace #0 blah (a=0xfffffee220) at .../gdb/testsuite/gdb.base/large-frame-1.c:24 #1 0x0000000120000b44 in func () Backtrace stopped: frame did not save the PC (gdb) FAIL: gdb.base/large-frame.exp: optimize=-O2: backtrace # of expected passes 5 # of unexpected failures 1 After applying the patch: # of expected passes 6 2022-05-10 Tiezhu Yang gdb: LoongArch: Use GDB style to check readbuf and writebuf The GDB style is to write 'if (readbuf != nullptr)', and the same for writebuf. 2022-05-10 Tom Tromey Fix --disable-threading build PR build/29110 points out that GDB fails to build on mingw when the "win32" thread model is in use. It turns out that the Fedora cross tools using the "posix" thread model, which somehow manages to support std::future, whereas the win32 model does not. While looking into this, I found that the configuring with --disable-threading will also cause a build failure. This patch fixes this build by introducing a compatibility wrapper for std::future. I am not able to test the win32 thread model build, but I'm going to ask the reporter to try this patch. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29110 2022-05-10 Pedro Alves Fix "b f(std::string)" when current language is C If you try to set a breakpoint at a function such as "b f(std::string)", and the current language is C, the breakpoint fails to be set, like so: (gdb) set language c break f(std::string) Function "f(std::string)" not defined. Make breakpoint pending on future shared library load? (y or [n]) n (gdb) The problem is that the code in GDB that expands the std::string typedef hits this in c-typeprint.c: /* If we have "typedef struct foo {. . .} bar;" do we want to print it as "struct foo" or as "bar"? Pick the latter for C++, because C++ folk tend to expect things like "class5 *foo" rather than "struct class5 *foo". We rather arbitrarily choose to make language_minimal work in a C-like way. */ if (language == language_c || language == language_minimal) { if (type->code () == TYPE_CODE_UNION) gdb_printf (stream, "union "); else if (type->code () == TYPE_CODE_STRUCT) { if (type->is_declared_class ()) gdb_printf (stream, "class "); else gdb_printf (stream, "struct "); } else if (type->code () == TYPE_CODE_ENUM) gdb_printf (stream, "enum "); } I.e., std::string is expanded to "class std::..." instead of just "std::...", and then the "f(class std::..." symbol doesn't exist. Fix this by making cp-support.c:inspect_type print the expanded typedef type using the language of the symbol whose type we're expanding the typedefs for -- in the example in question, the "std::string" typedef symbol, which is a C++ symbol. Use type_print_raw_options as it seems to me that in this scenario we always want raw types, to match the real symbol names. Adjust the gdb.cp/break-f-std-string.exp testcase to try setting a breakpoint at "f(std::string)" in both C and C++. Change-Id: Ib54fab4cf0fd307bfd55bf1dd5056830096a653b 2022-05-10 Pedro Alves Always pass an explicit language down to c_type_print The next patch will want to do language->print_type(type, ...), to print a type in a given language, avoiding a dependency on the current language. That doesn't work correctly currently, however, because most language implementations of language_defn::print_type call c_print_type without passing down the language. There are two overloads of c_print_type, one that takes a language, and one that does not. The one that does not uses the current language, defeating the point of calling language->print_type()... This commit removes the c_print_type overload that does not take a language, and adjusts the codebase throughout to always pass down a language. In most places, there's already an enum language handy. language_defn::print_type implementations naturally pass down this->la_language. In a couple spots, like in ada-typeprint.c and rust-lang.c there's no enum language handy, but the code is written for a specific language, so we just hardcode the language. In gnuv3_print_method_ptr, I wasn't sure whether we could hardcode C++ here, and we don't have an enum language handy, so I made it use the current language, just like today. Can always be improved later. Change-Id: Ib54fab4cf0fd307bfd55bf1dd5056830096a653b 2022-05-10 Pedro Alves Fix "b f(std::string)", always use DMGL_VERBOSE Currently, on any remotely modern GNU/Linux system, gdb.cp/no-dmgl-verbose.exp fails like so: break 'f(std::string)' Function "f(std::string)" not defined. (gdb) FAIL: gdb.cp/no-dmgl-verbose.exp: gdb_breakpoint: set breakpoint at 'f(std::string)' break 'f(std::basic_string, std::allocator >)' Function "f(std::basic_string, std::allocator >)" not defined. (gdb) PASS: gdb.cp/no-dmgl-verbose.exp: DMGL_VERBOSE-demangled f(std::string) is not defined This testcase was added back in 2011, here: [patch] Remove DMGL_VERBOSE https://sourceware.org/pipermail/gdb-patches/2011-June/083081.html Back then, the testcase would pass cleanly. It turns out that the reason it fails today is that the testcase is exercising something in GDB that only makes sense if the program is built for the pre-C++11 libstc++ ABI. Back then the C++11 ABI didn't exist yet, but nowadays, you need to compile with -D_GLIBCXX_USE_CXX11_ABI=0 to use the old ABI. See "Dual ABI" in the libstdc++ manual, at . If we tweak the gdb.cp/no-dmgl-verbose.exp testcase to force the old ABI with -D_GLIBCXX_USE_CXX11_ABI=0, then it passes cleanly. So why is it that setting a breakpoint at "f(std::string)" fails with modern ABI, but passes with old ABI? This is where libiberty demangler's DMGL_VERBOSE option comes in. The Itanium ABI mangling scheme has a shorthand form for std::string (and some other types). See : "In addition, the following catalog of abbreviations of the form "Sx" are used: ::= St # ::std:: ::= Sa # ::std::allocator ::= Sb # ::std::basic_string ::= Ss # ::std::basic_string < char, ::std::char_traits, ::std::allocator > ::= Si # ::std::basic_istream > ::= So # ::std::basic_ostream > ::= Sd # ::std::basic_iostream > " When the libiberty demangler encounters such a abbreviation, by default, it expands it to the user-friendly typedef "std::string", "std::iostream", etc.. If OTOH DMGL_VERBOSE is specified, the abbreviation is expanded to the underlying, non-typedefed fullname "std::basic_string, std::allocator >" etc. as documented in the Itanium ABI, and pasted above. You can see the standard abbreviations/substitutions in libiberty/cp-demangle.c:standard_subs. Back before Jan's patch in 2011, there were parts of GDB that used DMGL_VERBOSE, and others that did not, leading to mismatches. The solution back then was to stop using DMGL_VERBOSE throughout. GDB has code in place to let users set a breakpoint at a function with typedefs in its parameters, like "b f(uint32_t)". Demangled function names as they appear in the symbol tables almost (more on this is in a bit) never have typedefs in them, so when processing "b f(uint32_t)" GDB first replaces "uint32_t" for its underlying type, and then sets a breakpoint on the resulting prototype, in this case "f(unsigned int)". Now, if DMGL_VERBOSE is _not_ used, then the demangler demangles the mangled name of a function such as "void f(std::string)" that was mangled using the standard abbreviations mentioned above really as: "void f(std::string)". For example, the mangled name of "void f(std::string)" if you compile with old pre-C++11 ABI is "_Z1fSs". That uses the abbreviation "Ss", so if you demangle that without DMGL_VERBOSE, you get: $ echo "_Z1fSs" | c++filt --no-verbose f(std::string) while with DMGL_VERBOSE you'd get: $ echo "_Z1fSs" | c++filt f(std::basic_string, std::allocator >) If, when the user sets a breakpoint at "f(std::string)", GDB would replace the std::string typedef for its underlying type using the same mechanism I mentioned for the "f(uint32_t)" example above, then GDB would really try to set a breakpoint at "f(std::basic_string, std::allocator >)", and that would fail, as the function symbol GDB knows about for that function, given no DMGL_VERBOSE, is "f(std::string)". For this reason, the code that expands typedefs in function parameter names has an exception for std::string (and other standard abbreviation types), such that "std::string" is never typedef-expanded. And here lies the problem when you try to do "b f(std::string)" with a program compiled with the C++11 ABI. In that case, std::string expands to a different underlying type, like so: f(std::__cxx11::basic_string, std::allocator >) and this symbol naturally mangles differently, as: _Z1fNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEE and then because this doesn't use the shorthand mangling abbreviation for "std::string" anymore, it always demangles as: f(std::__cxx11::basic_string, std::allocator >) Now, when using the C++11 ABI, and you set a breakpoint at "f(std::string)", GDB's typedefs-in-parameters expansion code hits the exception for "std::string" and doesn't expand it, so the breakpoint fails to be inserted, because the symbol that exists is really the f(std::__cxx11::basic_string, std::allocator >) one, not "f(std::string)". So to fix things for C++11 ABI, clearly we need to remove the "std::string" exception from the typedef-in-parameters expansion logic. If we do just that, then "b f(std::string)" starts working with the C++11 ABI. However, if we do _just_ that, and nothing else, then we break pre-C++11 ABI... The solution is then to in addition switch GDB to always use DMGL_VERBOSE. If we do this, then pre-C++11 ABI symbols works the same as C++11 ABI symbols overall -- the demangler expands the standard abbreviation for "std::string" as "std::basic_string, std::allocator >" and letting GDB expand the "std::string" typedef (etc.) too is no longer a problem. To avoid getting in the situation where some parts of GDB use DMGL_VERBOSE and others not, this patch adds wrappers around the demangler's entry points that GDB uses, and makes those force DMGL_VERBOSE. The point of the gdb.cp/no-dmgl-verbose.exp testcase was to try to ensure that DMGL_VERBOSE doesn't creep back in: gdb_test {break 'f(std::basic_string, std::allocator >)'} \ {Function ".*" not defined\.} \ "DMGL_VERBOSE-demangled f(std::string) is not defined" This obviously no longer makes sense to have, since we now depend on DMGL_VERBOSE. So the patch replaces gdb.cp/no-dmgl-verbose.exp with a new gdb.cp/break-f-std-string.exp testcase whose purpose is to make sure that setting a breakpoint at "f(std::string)" works. It exercises both pre-C++11 ABI and C++11 ABI. Change-Id: Ib54fab4cf0fd307bfd55bf1dd5056830096a653b 2022-05-10 Nils-Christian Kempke gdb/testsuite: fix testsuite regressions for unix/-m32 board This commit fixes two regressions introduced by 891e4190ba705373eec7b374209478215fff5401. Reason for the failures was, that on a 32 bit machine the maximum array length as well as the maximum allocatable memory for arrays (in bytes) both seem to be limited by the maximum value of a 4 byte (signed) Fortran integer. This lead to compiler errors/unexpected behavior when compiling/running the test with the -m32 board. This behavior is compiler dependent and can differ for different compiler implementations, but generally, it seemed like a good idea to simply avoid such situations. The affected tests check for GDB's overflow behavior when using KIND parameters with GDB implemented Fortran intrinsic functions. If these KIND parameters are too small to fit the actual intrinsic function's result, an overflow is expected. This was done for 1, 2, and 4 byte overflows. The last one caused problems, as it tried to allocate arrays of length/byte-size bigger than the 4 byte signed integers which would then be used with the LBOUND/UBOUND/SIZE intrinsics. The tests were adapted to only execute the 4 byte overflow tests when running on targets with 64 bit. For this, the compiled tests evaluate the byte size of a C_NULL_PTR via C_SIZEOF, both defined in the ISO_C_BINDING module. The ISO_C_BINDING constant C_NULL_PTR is a Fortran 2003, the C_SIZEOF a Fortran 2008 extension. Both have been implemented in their respective compilers for while (e.g. C_SIZEOF is available since gfortran 4.6). If this byte size evaluates to less than 8 we skip the 4 byte overflow tests in the compiled tests of size.f90 and lbound-ubound.f90. Similarly, in the lbound-ubound.exp testsfile we skip the 4 byte overflow tests if the procedure is_64_target evaluates to false. In size.f90, additionally, the to-be-allocated amount of bytes did not fit into 4 byte signed integers for some of the arrays, as it was approximately 4 times the maximum size of a 4 byte signed integer. We adapted the dimensions of the arrays in question as the meaningfulness of the test does not suffer from this. With this patch both test run fine with the unix/-m32 board and gcc/gfortran (9.4) as well as the standard board file. We also thought about completely removing the affected test from the testsuite. We decided against this as the 32 bit identification comes with Fortran 2008 and removing tests would have decreased coverage. A last change that happened with this patch was due to gfortran's and ifx's type resolution when assigning big constants to Fortran Integer*8 variables. Before the above changes this happened in a parameter statement. Here, both compilers happily accepted a line like integer*8, parameter :: var = 2147483647 + 5. After this change the assignment is not done as a parameter anymore, as this triggered compile time overflow errors. Instead, the assignment is done dynamically, depending on the kind of machine one is on. Sadly, just changing this line to integer*8 :: var var = 2147483647 + 5 does not work with ifx (or flang for that matter, they behave similarly here). It will create an integer overflow in the addition as ifx deduces the type the additon is done in as Integer*4. So var will actually contain the value -2147483644 after this. The lines integer*8 :: var var = 2147483652 on the other hand fail to compile with gfortran (9.4.0) as the compiler identifies an Integer overflow here. Finally, to make this work with all three compilers an additional parameter has been introduced integer*8, parameter :: helper = 2147483647 integer*8 :: var var = helper + 5. This works on all 3 compilers as expected. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29053 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29054 2022-05-10 Pedro Alves Move non-dependent gdb::observers::observable::visit_state outside template The other day, while looking at the symbols that end up in a GDB index, I noticed that the gdb::observers::observable::visit_state enum class appears a number of times: $ grep VISIT gdb-index-symbol-names.txt gdb::observers::observable::visit_state::NOT_VISITED gdb::observers::observable::visit_state::VISITED gdb::observers::observable::visit_state::VISITING gdb::observers::observable::visit_state::NOT_VISITED gdb::observers::observable::visit_state::VISITED gdb::observers::observable::visit_state::VISITING gdb::observers::observable::visit_state::NOT_VISITED gdb::observers::observable::visit_state::VISITED gdb::observers::observable::visit_state::VISITING gdb::observers::observable::visit_state::NOT_VISITED gdb::observers::observable::visit_state::VISITED gdb::observers::observable::visit_state::VISITING gdb::observers::observable >::visit_state::NOT_VISITED gdb::observers::observable >::visit_state::VISITED gdb::observers::observable >::visit_state::VISITING gdb::observers::observable::visit_state::NOT_VISITED gdb::observers::observable::visit_state::VISITED gdb::observers::observable::visit_state::VISITING gdb::observers::observable::visit_state::NOT_VISITED gdb::observers::observable::visit_state::VISITED gdb::observers::observable::visit_state::VISITING gdb::observers::observable::visit_state::NOT_VISITED gdb::observers::observable::visit_state::VISITED gdb::observers::observable::visit_state::VISITING [... snip ...] $ grep VISIT gdb-index-symbol-names.txt | wc -l 72 enum class visit_state is defined inside the class template observable, but it doesn't have to be, as it does not depend on the template parameters. This commit moves it out, so that only one such type exists. This reduces the size of a -O0 -g3 build for me by around 0.6%, like so: $ du -b gdb.before gdb.after 164685280 gdb.before 163707424 gdb.fixed and codesize by some 0.5%. Change-Id: I405f4ef27b8358fdd22158245b145d849b45658e 2022-05-10 Nick Clifton Fix compiling binutils/resbin.c with Clang version 14 2022-05-10 Vladimir Mezentsev gprofng: include percentages in default metrics list gprofng/ChangeLog 2022-05-09 Vladimir Mezentsev * src/gprofng.rc: Include percentages in default metrics list. 2022-05-10 Alan Modra gprof: remove use of PTR * basic_blocks.c: Replace uses of PTR with void * throughout. * cg_arcs.c: Likewise. * cg_print.c: Likewise. * hist.c: Likewise. * source.h: Likewise. * symtab.c: Likewise. gas: remove use of PTR * config/obj-evax.c (evax_symbol_new_hook): Don't cast to PTR. 2022-05-10 Alan Modra opcodes: remove use of PTR The non-cgen parts of opcodes. * cr16-dis.c (print_arg): Replace PTR with void *. * crx-dis.c (print_arg): Likewise. * rl78-dis.c (print_insn_rl78_common): Don't use PTR cast. * rx-dis.c (print_insn_rx): Likewise. * visium-dis.c (print_insn_visium): Likewise. * z8k-dis.c (print_insn_z8k): Likewise. 2022-05-10 Alan Modra bfd: remove use of PTR * coffcode.h (coff_write_object_contents): Don't cast to PTR. * elf32-csky.c (csky_elf_link_hash_traverse): Remove use of PTR and PARAMS. (csky_allocate_dynrelocs): Don't use PTR cast. * elf32-nios2.c (adjust_dynrelocs, allocate_dynrelocs): Replace PTR with void *. * elf32-visium.c (visium_elf_howto_parity_reloc): Likewise. * elfxx-ia64.c (ia64_elf_reloc): Likewise. * plugin.c (bfd_plugin_bfd_print_private_bfd_data): Likewise. include: remove use of PTR * hashtab.h (HTAB_EMPTY_ENTRY): Replace PTR with void *. (HTAB_DELETED_ENTRY): Likewise. 2022-05-10 GDB Administrator Automatic date update in version.in 2022-05-09 Ilya Leoshkevich IBM zSystems: Accept (. - 0x100000000) PCRel32 operands as does not accept instructions like brasl %r0,.-0x100000000, because of two problems with the generic overflow check: 1. PCRel32 operands are signed, but are treated as unsigned. 2. The allowed range for these operands is [-(1 << 32), (1 << 32) - 1], and not [-(1 << 31), (1 << 31) - 1]. Fix both by disabling the generic overflow check - it's not needed, because s390_insert_operand () performs its own. gas/ * config/tc-s390.c (md_gather_operands): Set fx_no_overflow. * testsuite/gas/s390/s390.exp: Add zarch-z900-err. * testsuite/gas/s390/esa-z900.d: New test. * testsuite/gas/s390/esa-z900.s: New test. * testsuite/gas/s390/zarch-z900-err.l: New test. * testsuite/gas/s390/zarch-z900-err.s: New test. 2022-05-09 Andrew Burgess gdb/testsuite: fix occasional failure in gdb.mi/mi-multi-commands.exp In bug PR gdb/29036, another failure was reported for the test gdb.mi/mi-multi-commands.exp. This test sends two commands to GDB as a single write, and then checks that both commands are executed. The problem that was encountered here is that the output of the first command, which looks like this: ^done,value="\"FIRST COMMAND\"" Is actually produced in parts, first the '^done' is printed, then the ',value="\"FIRST COMMAND\"" is printed. What was happening is that some characters from the second command were being echoed after the '^done' had been printed, but before the value part had been printed. To avoid this issue I've relaxed the pattern that checks for the first command a little. With this fix in place the occasional failure in this test is no longer showing up. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29036 2022-05-09 Tom de Vries [gdb] Update syscalls/{amd64,i386}-linux.xml - Add a script syscalls/gen-header.py, based on syscalls/arm-linux.py. - Add a script syscalls/update-linux.sh (alongside update-freebsd.sh and update-netbsd.sh). - Use syscalls/update-linux.sh to update syscalls/{amd64,i386}-linux.xml.in. - Regenerate syscalls/{amd64,i386}-linux.xml using syscalls/Makefile. In gdb/syscalls/i386-linux.xml.in, updating has the following notable effect: ... - - - + + ... I've verified in ./arch/x86/entry/syscalls/syscall_32.tbl that the numbers are correct. Tested on x86_64-linux. 2022-05-09 Tom de Vries [gdb] Add gdb/syscalls/Makefile Add a Makefile in gdb/syscalls that can be used to translate gdb/syscalls/*.xml.in into gdb/syscalls/*.xml. Calling make reveals that bfin-linux.xml is missing, so add it. Tested on x86_64-linux. 2022-05-09 Tiezhu Yang gdb: LoongArch: Implement the return_value gdbarch method When execute the following command on LoongArch: make check-gdb TESTS="gdb.base/async.exp" there exist the following failed testcases: FAIL: gdb.base/async.exp: finish& (timeout) FAIL: gdb.base/async.exp: jump& (timeout) FAIL: gdb.base/async.exp: until& (timeout) FAIL: gdb.base/async.exp: set exec-done-display off (GDB internal error) we can see the following messages in gdb/testsuite/gdb.log: finish& Run till exit from #0 foo () at /home/loongson/gdb.git/gdb/testsuite/gdb.base/async.c:9 (gdb) /home/loongson/gdb.git/gdb/gdbarch.c:2646: internal-error: gdbarch_return_value: Assertion `gdbarch->return_value != NULL' failed. A problem internal to GDB has been detected, further debugging may prove unreliable. In order to fix the above failed testcases, implement the return_value gdbarch method on LoongArch. 2022-05-09 Andrew Burgess gdb: fix for gdb.base/eof-exit.exp test failures This fix relates to PR gdb/29032, this makes the test more stable by ensuring that the Ctrl-D is only sent once the prompt has been displayed. This issue was also discussed on the mailing list here: https://sourceware.org/pipermail/gdb-patches/2022-April/187670.html The problem identified in the bug report is that sometimes the Ctrl-D (that the test sends to GDB) arrives while GDB is processing a command. When this happens the Ctrl-D is handled differently than if the Ctrl-D is sent while GDB is waiting for input at a prompt. The original intent of the test was that the Ctrl-D be sent while GDB was waiting at a prompt, and that is the case the occurs most often, but, when the Ctrl-D arrives during command processing, then GDB will ignore the Ctrl-D, and the test will fail. This commit ensures the Ctrl-D is always sent while GDB is waiting at a prompt, which makes this test stable. But, that still leaves an open question, what should happen when the Ctrl-D arrives while GDB is processing a command? This commit doesn't attempt to answer that question, which is while bug PR gdb/29032 will not be closed once this commit is merged. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29032 2022-05-09 Tom de Vries [gdb] Make btrace maintainer entry more clear Do: ... -record btrace +record + btrace ... to clarify that the listed maintainer is only maintainer of the btrace part of record. 2022-05-09 Martin Liska ansidecl.h: sync from GCC include/ChangeLog: * ansidecl.h: Sync from GCC. 2022-05-09 Tom de Vries [gdb/tdep] Support catch syscall pipe2 for i386 With test-case gdb.base/catch-syscall.exp and target board unix/-m32, we run into: ... (gdb) catch syscall pipe2^M Unknown syscall name 'pipe2'.^M (gdb) FAIL: gdb.base/catch-syscall.exp: determine pipe syscall: catch syscall pipe2 ... Fix this by: - adding a pipe2 entry in gdb/syscalls/i386-linux.xml.in, and - regenerating gdb/syscalls/i386-linux.xml using "xsltproc --output i386-linux.xml apply-defaults.xsl i386-linux.xml.in". Tested on x86_64-linux with native and unix/-m32. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29056 2022-05-09 Tom de Vries [gdb/testsuite] Handle pipe2 syscall in gdb.base/catch-syscall.exp When running test-case gdb.reverse/pipe-reverse.exp on openSUSE Tumbleweed, I run into: ... (gdb) continue^M Continuing.^M ^M Catchpoint 2 (returned from syscall pipe2), in pipe () from /lib64/libc.so.6^M (gdb) FAIL: gdb.base/catch-syscall.exp: without arguments: \ syscall pipe has returned ... The current glibc on Tumbleweed is 2.35, which contains commit "linux: Implement pipe in terms of __NR_pipe2", and consequently syscall pipe2 is used instead of syscall pipe. Fix this by detecting whether syscall pipe or pipe2 is used before running the tests. Tested on x86_64-linux, specifically on: - openSUSE Tumbleweed (with glibc 2.35), and - openSUSE Leap 15.3 (with glibc 2.31). On openSUSE Tumbleweed + target board unix/-m32, this exposes: ... (gdb) catch syscall pipe2^M Unknown syscall name 'pipe2'.^M ... which will be fixed in a folllow-up patch. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29056 2022-05-09 Tom de Vries [gdb/tdep] Handle pipe2 syscall for amd64 When running test-case gdb.reverse/pipe-reverse.exp on openSUSE Tumbleweed, I run into: ... (gdb) continue^M Continuing.^M Process record and replay target doesn't support syscall number 293^M Process record: failed to record execution log.^M ^M Program stopped.^M 0x00007ffff7daabdb in pipe () from /lib64/libc.so.6^M (gdb) FAIL: gdb.reverse/pipe-reverse.exp: continue to breakpoint: marker2 ... The current glibc on Tumbleweed is 2.35, which contains commit "linux: Implement pipe in terms of __NR_pipe2", and consequently syscall pipe2 is used in stead of syscall pipe. There is already support added for syscall pipe2 for aarch64 (which only has syscall pipe2, not syscall pipe), so enable the same for amd64, by: - adding amd64_sys_pipe2 in enum amd64_syscall - translating amd64_sys_pipe2 to gdb_sys_pipe2 in amd64_canonicalize_syscall Tested on x86_64-linux, specifically on: - openSUSE Tumbleweed (with glibc 2.35), and - openSUSE Leap 15.3 (with glibc 2.31). Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29056 2022-05-09 GDB Administrator Automatic date update in version.in 2022-05-08 Tom de Vries [gdb/testsuite] Fix gdb.tui/scroll.exp with read1 When running test-case gdb.tui/scroll.exp, I get: ... Box Dump (80 x 8) @ (0, 0): 0 $17 = 16 1 (gdb) p 17 2 $18 = 17 3 (gdb) p 18 4 $19 = 18 5 (gdb) p 19 6 $20 = 19 7 (gdb) PASS: gdb.tui/scroll.exp: check cmd window in flip layout ... but with check-read1 I get instead: ... Box Dump (80 x 8) @ (0, 0): 0 (gdb) 15 1 (gdb) p 16 2 $17 = 16 3 (gdb) p 17 4 $18 = 17 5 (gdb) p 18 6 $19 = 18 7 (gdb) p 19 FAIL: gdb.tui/scroll.exp: check cmd window in flip layout ... The "p 19" command is handled by Term::command, which sends the command and then does Term::wait_for "^$gdb_prompt [string_to_regexp $cmd]", which: - matches the line with "(gdb) p 19", and - tries to match the following prompt "(gdb) " The problem is that scrolling results in reissuing output before the "(gdb) p 19", and the second matching triggers on that. Consequently, wait_for no longer translates gdb output into screen actions, and the screen does not reflect the result of "p 19". Fix this by using a new proc wait_for_region_contents, which in contrast to wait_for can handle a multi-line regexp. Tested on x86_64-linux with make targets check and check-read1. 2022-05-08 Tom de Vries [gdb/testsuite] Fix gdb.cp/casts.exp with -m32 When running test-case gdb.cp/casts.exp with target board unix/-m32, I run into: ... (gdb) print (unsigned long long) &gd == gd_value^M $31 = false^M (gdb) FAIL: gdb.cp/casts.exp: print (unsigned long long) &gd == gd_value ... With some additional printing, we can see in more detail why the comparison fails: ... (gdb) print /x &gd^M $31 = 0xffffc5c8^M (gdb) PASS: gdb.cp/casts.exp: print /x &gd print /x (unsigned long long)&gd^M $32 = 0xffffc5c8^M (gdb) PASS: gdb.cp/casts.exp: print /x (unsigned long long)&gd print /x gd_value^M $33 = 0xffffffffffffc5c8^M (gdb) PASS: gdb.cp/casts.exp: print /x gd_value print (unsigned long long) &gd == gd_value^M $34 = false^M (gdb) FAIL: gdb.cp/casts.exp: print (unsigned long long) &gd == gd_value ... The gd_value is set by this assignment: ... unsigned long long gd_value = (unsigned long long) &gd; ... The problem here is directly casting from a pointer to a non-pointer-sized integer. Fix this by adding an intermediate cast to std::uintptr_t. Tested on x86_64-linux with native and target board unix/-m32. 2022-05-08 Tom de Vries [gdb/testsuite] Handle init errors in gdb.mi/user-selected-context-sync.exp In OBS, on aarch64-linux, with a gdb 11.1 based package, I run into: ... (gdb) builtin_spawn -pty^M new-ui mi /dev/pts/5^M New UI allocated^M (gdb) =thread-group-added,id="i1"^M (gdb) ERROR: MI channel failed warning: Error detected on fd 11^M thread 1.1^M Unknown thread 1.1.^M (gdb) UNRESOLVED: gdb.mi/user-selected-context-sync.exp: mode=non-stop: \ test_cli_inferior: reset selection to thread 1.1 ... with many more UNRESOLVED following. The ERROR is a common problem, filed as https://sourceware.org/bugzilla/show_bug.cgi?id=28561 . But the many UNRESOLVEDs are due to not checking whether the setup as done in the test_setup function succeeds or not. Fix this by: - making test_setup return an error upon failure - handling test_setup error at the call site - adding a "setup done" pass/fail to be turned into an unresolved in case of error during setup. Tested on x86_64-linux, by manually triggering the error in mi_gdb_start_separate_mi_tty. 2022-05-08 Tom de Vries [gdb/testsuite] Fix gdb.ada/catch_ex_std.exp with remote-gdbserver-on-localhost When running test-case gdb.ada/catch_ex_std.exp on target board remote-gdbserver-on-localhost, I run into: ... (gdb) continue^M Continuing.^M [Inferior 1 (process 15656) exited with code 0177]^M (gdb) FAIL: gdb.ada/catch_ex_std.exp: runto: run to main Remote debugging from host ::1, port 49780^M /home/vries/foo: error while loading shared libraries: libsome_package.so: \ cannot open shared object file: No such file or directory^M ... Fix this by adding the usual shared-library + remote-target helper "gdb_load_shlib $sofile". Tested on x86_64-linux with native and target board remote-gdbserver-on-localhost. 2022-05-08 Tom de Vries [gdb/testsuite] Fix gdb.threads/fork-plus-threads.exp with check-readmore When running test-case gdb.threads/fork-plus-threads.exp with check-readmore, I run into: ... [Inferior 11 (process 7029) exited normally]^M [Inferior 1 (process 6956) exited normally]^M FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: \ inferior 1 exited (timeout) ... The problem is that the regexp consuming the "Inferior exited normally" messages: - consumes more than one of those messages at a time, but - counts only one of those messages. Fix this by adopting a line-by-line approach, which deals with those messages one at a time. Tested on x86_64-linux with native, check-read1 and check-readmore. 2022-05-08 GDB Administrator Automatic date update in version.in 2022-05-07 Tom Tromey Fix "catch syscall" Simon pointed out that some recent patches of mine broke "catch syscall". Apparently I forgot to finish the conversion of this code when removing init_catchpoint. This patch completes the conversion and fixes the bug. 2022-05-07 Andrew Burgess gdb/readline: fix extra 'quit' message problem After these two commits: commit 4fb7bc4b147fd30b781ea2dad533956d0362295a Date: Mon Mar 7 13:49:21 2022 +0000 readline: back-port changes needed to properly detect EOF commit 91395d97d905c31ac38513e4aaedecb3b25e818f Date: Tue Feb 15 17:28:03 2022 +0000 gdb: handle bracketed-paste-mode and EOF correctly It was observed that, if a previous command is selected at the readline prompt using the up arrow key, then when the command is accepted (by pressing return) an unexpected 'quit' message will be printed by GDB. Here's an example session: (gdb) p 123 $1 = 123 (gdb) p 123 quit $2 = 123 (gdb) In this session the second 'p 123' was entered not by typing 'p 123', but by pressing the up arrow key to select the previous command. It is important that the up arrow key is used, typing Ctrl-p will not trigger the bug. The problem here appears to be readline's EOF detection when handling multi-character input sequences. I have raised this issue on the readline mailing list here: https://lists.gnu.org/archive/html/bug-readline/2022-04/msg00012.html a solution has been proposed here: https://lists.gnu.org/archive/html/bug-readline/2022-04/msg00016.html This patch includes a test for this issue as well as a back-port of (the important bits of) readline commit: commit 2ef9cec8c48ab1ae3a16b1874a49bd1f58eaaca1 Date: Wed May 4 11:18:04 2022 -0400 fix for setting RL_STATE_EOF in callback mode That commit also includes some updates to the readline documentation and tests that I have not included in this commit. With this commit in place the unexpected 'quit' messages are resolved. 2022-05-07 Alan Modra Fix multiple ubsan warnings in i386-dis.c Commit 39fb369834a3 "opcodes: Make i386-dis.c thread-safe" introduced a number of casts to bfd_signed_vma that cause undefined behaviour with a 32-bit libbfd. Revert those changes. * i386-dis.c (OP_E_memory): Do not cast disp to bfd_signed_vma for negation. (get32, get32s): Don't use bfd_signed_vma here. 2022-05-07 Alan Modra Re: Fix new linker testsuite failures due to rwx segment test problems Fix it some more. bfd/ * elfnn-loongarch.c: Remove commented out elf_backend_* defines. ld/ * testsuite/ld-elf/elf.exp (target_defaults_to_execstack): Match arm*. Delete loongarch. 2022-05-07 GDB Administrator Automatic date update in version.in 2022-05-07 Carl Love PowerPC fix for gdb.server/sysroot.exp On PowerPC, the stop in the printf function is of the form: Breakpoint 2, 0x00007ffff7c6ab08 in printf@@GLIBC_2.17 () from /lib64/libc.so.6 On other architectures the output looks like: Breakpoint 2, 0x0000007fb7ea29ac in printf () from /lib/aarch64-linux-gnu/libc.so.6 The following patch modifies the printf test by matchine any character starting immediately after the printf. The test now works for PowerPC output as well as the output from other architectures. The test has been run on a Power 10 system and and Intel x86_64 system. 2022-05-06 Nick Clifton Fix new linker testsuite failures due to rwx segment test problems 2022-05-06 Tom Tromey Introduce catchpoint class This introduces a catchpoint class that is used as the base class for all catchpoints. init_catchpoint is rewritten to be a constructor instead. This changes the hierarchy a little -- some catchpoints now inherit from base_breakpoint whereas previously they did not. This isn't a problem, as long as re_set is redefined in catchpoint. 2022-05-06 Tom Tromey Add initializers to tracepoint This adds some initializers to tracepoint. I think right now these may not be needed, due to obscure rules about zero initialization. However, this will change in the next patch, and anyway it is clearer to be explicit. Remove init_raw_breakpoint_without_location This removes init_raw_breakpoint_without_location, replacing it with a constructor on 'breakpoint' itself. The subclasses and callers are all updated. Disable copying for breakpoint It seems to me that breakpoint should use DISABLE_COPY_AND_ASSIGN. This patch does this. Add constructor to exception_catchpoint This adds a constructor to exception_catchpoint and simplifies the caller. Add constructor to syscall_catchpoint This adds a constructor to syscall_catchpoint and simplifies the caller. Add constructor to signal_catchpoint This adds a constructor to signal_catchpoint and simplifies the caller. Add constructor to solib_catchpoint This adds a constructor to solib_catchpoint and simplifies the caller. Add constructor to fork_catchpoint This adds a constructor to fork_catchpoint and simplifies the caller. Remove unnecessary line from catch_exec_command_1 catch_exec_command_1 clears the new catchpoint's "exec_pathname" field, but this is already done by virtue of calling "new". Constify breakpoint::print_recreate This constifies breakpoint::print_recreate. Constify breakpoint::print_mention This constifies breakpoint::print_mention. Constify breakpoint::print_one This constifies breakpoint::print_one. Constify breakpoint::print_it This constifies breakpoint::print_it. Doing this pointed out some code in ada-lang.c that can be simplified a little as well. Move works_in_software_mode to watchpoint works_in_software_mode is only useful for watchpoints. This patch moves it from breakpoint to watchpoint, and changes it to return bool. Boolify breakpoint::explains_signal This changes breakpoint::explains_signal to return bool. Remove breakpoint::ops The breakpoint::ops field is set but never used. This removes it. Change print_recreate_thread to a method This changes print_recreate_thread to be a method on breakpoint. This function is only used as a helper by print_recreate methods, so I thought this transformation made sense. 2022-05-06 Carl Love PowerPC: bp-permanent.exp, kill-after-signal fix The break point after the stepi on Intel is the entry point of the user signal handler function test_signal_handler. The code at the break point looks like: 0x : endbr64 On PowerPC with a Linux 5.9 kernel or latter, the address where gdb stops after the stepi is in the vdso code inserted by the kernel. The code at the breakpoint looks like: 0x <__kernel_start_sigtramp_rt64>: bctrl This is different from other architectures. As discussed below, recent kernel changes involving the vdso for PowerPC have been made changes to the signal handler code flow. PowerPC is now stopping in function __kernel_start_sigtramp_rt64. PowerPC now requires an additional stepi to reach the user signal handler unlike other architectures. The bp-permanent.exp and kill-after-signal tests run fine on PowerPC with an kernel that is older than Linux 5.9. The PowerPC 64 signal handler was updated by the Linux kernel 5.9-rc1: commit id: 0138ba5783ae0dcc799ad401a1e8ac8333790df9 powerpc/64/signal: Balance return predictor stack in signal trampoline An additional change to the PowerPC 64 signal handler was made in Linux kernel version 5.11-rc7 : commit id: 24321ac668e452a4942598533d267805f291fdc9 powerpc/64/signal: Fix regression in __kernel_sigtramp_rt64() semantics The first kernel change, puts code into the user space signal handler (in the vdso) as a performance optimization to prevent the call/return stack from getting out of balance. The patch ensures that the entire user/kernel/vdso cycle is balanced with the addition of the "brctl" instruction. The second patch, fixes the semantics of __kernel_sigtramp_rt64(). A new symbol is introduced to serve as the jump target from the kernel to the trampoline which now consists of two parts. The above changes for PowerPC signal handler, causes gdb to stop in the kernel code not the user signal handler as expected. The kernel dispatches to the vdso code which in turn calls into the signal handler. PowerPC is special in that the kernel is using a vdso instruction (bctrl) to enter the signal handler. I do not have access to a system with the first patch but not the second. I did test on Power 9 with the Linux 5.15.0-27-generic kernel. Both tests fail on this Power 9 system. The two tests also fail on Power 10 with the Linux 5.14.0-70.9.1.el9_0.ppc64le kernel. The following patch fixes the issue by checking if gdb stopped at "signal handler called". If gdb stopped there, the tests verifies gdb is in the kernel function __kernel_start_sigtramp_rt64 then does an additional stepi to reach the user signal handler. With the patch below, the tests run without errors on both the Power 9 and Power 10 systems with out any failures. 2022-05-06 Alan Modra bfd targmatch.h makefile rule I hit this just now with a make -j build after touching config.bfd. mv: cannot stat 'targmatch.new': No such file or directory make[2]: *** [Makefile:2336: targmatch.h] Error 1 make[2]: *** Waiting for unfinished jobs.... Fix that by not removing the target of the rule, a practice that seems likely to cause parallel running of the rule recipe. The bug goes back to 1997, the initial c0734708814c commit. * Makefile.am (targmatch.h): rm the temp file, not targmatch.h. * Makefile.in: Regenerate. 2022-05-06 Tom de Vries [gdb/testsuite] Fix gdb.dwarf2/locexpr-data-member-location.exp with nopie When running test-case gdb.dwarf2/locexpr-data-member-location.exp with target board unix/-fno-PIE/-no-pie/-m32 I run into: ... (gdb) step^M 26 return 0;^M (gdb) FAIL: gdb.dwarf2/locexpr-data-member-location.exp: step into foo ... The problem is that the test-case tries to mimic some gdb_compile_shlib behaviour using: ... set flags {additional_flags=-fpic debug} get_func_info foo $flags ... but this doesn't work with the target board setting, because we end up doing: ... gcc locexpr-data-member-location-lib.c -fpic -g -lm -fno-PIE -no-pie -m32 \ -o func_addr23029.x ... while gdb_compile_shlib properly filters out the -fno-PIE -no-pie. Consequently, the address for foo determined by get_func_info doesn't match the actual address of foo. Fix this by printing the address of foo using the result of gdb_compile_shlib. 2022-05-06 GDB Administrator Automatic date update in version.in 2022-05-05 Simon Marchi gdb: use gdb::function_view for gdbarch_iterate_over_objfiles_in_search_order callback A rather straightforward patch to change an instance of callback + void pointer to gdb::function_view, allowing pasing lambdas that capture, and eliminating the need for the untyped pointer. Change-Id: I73ed644e7849945265a2c763f79f5456695b0037 2022-05-05 Vladimir Mezentsev gprofng: use $host instead $target By mistake, $target was used instead of $host to configure the gprogng build. gprofng/ChangeLog 2022-04-28 Vladimir Mezentsev PR gprofng/29113 PR gprofng/29116 * configure.ac: Use $host instead $target. * libcollector/configure.ac: Likewise. * configure: Rebuild. * libcollector/configure: Rebuild. 2022-05-05 Simon Marchi gdb: make regcache's cooked_write_test selftest work with native-extended-gdbserver board Running $ make check TESTS="gdb.gdb/unittest.exp" RUNTESTFLAGS="--target_board=native-extended-gdbserver" I get some failures: Running selftest regcache::cooked_write_test::i386.^M Self test failed: target already pushed^M Running selftest regcache::cooked_write_test::i386:intel.^M Self test failed: target already pushed^M Running selftest regcache::cooked_write_test::i386:x64-32.^M Self test failed: target already pushed^M Running selftest regcache::cooked_write_test::i386:x64-32:intel.^M Self test failed: target already pushed^M Running selftest regcache::cooked_write_test::i386:x86-64.^M Self test failed: target already pushed^M Running selftest regcache::cooked_write_test::i386:x86-64:intel.^M Self test failed: target already pushed^M Running selftest regcache::cooked_write_test::i8086.^M Self test failed: target already pushed^M This is because the native-extended-gdbserver automatically connects GDB to a GDBserver on startup, and therefore pushes a remote target on the initial inferior. cooked_write_test is currently written in a way that errors out if the current inferior has a process_stratum_target pushed. Rewrite it to use scoped_mock_context, so it doesn't depend on the current inferior (the current one upon entering the function). Change-Id: I0357f989eacbdecc4bf88b043754451b476052ad 2022-05-05 Luis Machado Move TILE-Gx files to TARGET64_LIBOPCODES_CFILES TILE-Gx is a 64-bit core, so we should include those files in the TARGET64_LIBOPCODES_CFILES as opposed to TARGET32_LIBOPCODES_CFILES. Don't define ARCH_cris for BFD64 I believe it is a mistake to define ARCH_cris when BFD64 is defined. It is a 32-bit architecture, so should be placed outside of the BFD64 block. 2022-05-05 Xi Ruoyao loongarch: Don't check ABI flags if no code section Various packages (glib and gtk4 for example) produces data-only objects using `ld -r -b binary` or `objcopy`, with no elf header flags set. But these files also have no code sections, so they should be compatible with all ABIs. bfd/ * elfnn-loongarch.c (elfNN_loongarch_merge_private_bfd_data): Skip ABI checks if the input has no code sections. Reported-by: Wu Xiaotian Suggested-by: Wang Xuerui 2022-05-05 Andreas Krebbel IBM zSystems: mgrk, mg first operand requires register pair opcodes/ * s390-opc.c (INSTR_RRF_R0RER): New instruction type. (MASK_RRF_R0RER): Define mask for new instruction type. * s390-opc.txt: Use RRF_R0RER for mgrk and RXY_RERRD for mg. 2022-05-05 H.J. Lu bfd: Check NULL pointer before setting ref_real PR ld/29086 * linker.c (bfd_wrapped_link_hash_lookup): Check NULL pointer before setting ref_real. 2022-05-05 GDB Administrator Automatic date update in version.in 2022-05-05 H.J. Lu LTO: Handle __real_SYM reference in IR When an IR symbol SYM is referenced in IR via __real_SYM, its resolution should be LDPR_PREVAILING_DEF, not PREVAILING_DEF_IRONLY, since LTO doesn't know that __real_SYM should be resolved by SYM. bfd/ PR ld/29086 * linker.c (bfd_wrapped_link_hash_lookup): Mark SYM is referenced via __real_SYM. include/ PR ld/29086 * bfdlink.h (bfd_link_hash_entry): Add ref_real. ld/ PR ld/29086 * plugin.c (get_symbols): Resolve SYM definition to LDPR_PREVAILING_DEF for __real_SYM reference. * testsuite/ld-plugin/lto.exp: Run PR ld/29086 test. * testsuite/ld-plugin/pr29086.c: New file. 2022-05-04 Alan Modra cris bfd config cris support will be built into a 32-bit bfd if using --enable-targets=all on a 32-bit host, so we may as well make targmatch.h include cris. * config.bfd (cris): Remove #idef BFD64. 2022-05-04 Alan Modra PowerPC64 check_relocs Tidy the dynamic reloc handling code in check_relocs, removing leftover comments and code from when check_relocs was called as each object file was read in. * elf64-ppc.c (ppc64_elf_check_relocs): Tidy dynamic reloc handling code. (dec_dynrel_count): Do the same here. 2022-05-04 Tom Tromey Fix crash when creating index from index My patches yesterday to unify the DWARF index base classes had a bug -- namely, I did the wholesale dynamic_cast-to-static_cast too hastily and introduced a crash. This can be seen by trying to add an index to a file that has an index, or by running a test like gdb-index-cxx.exp using the cc-with-debug-names.exp target board. This patch fixes the crash by introducing a new virtual method and removing some of the static casts. 2022-05-04 Luis Machado Fix build failure for aarch64 gdbserver We're missing an argument. 2022-05-04 Mark Wielaard gdb: Workaround stringop-overread warning in debuginfod-support.c on s390x For some reason g++ 11.2.1 on s390x produces a spurious warning for stringop-overread in debuginfod_is_enabled for url_view. Add a new DIAGNOSTIC_IGNORE_STRINGOP_OVERREAD macro to suppress this warning. include/ChangeLog: * diagnostics.h (DIAGNOSTIC_IGNORE_STRINGOP_OVERREAD): New macro. gdb/ChangeLog: * debuginfod-support.c (debuginfod_is_enabled): Use DIAGNOSTIC_IGNORE_STRINGOP_OVERREAD on s390x. 2022-05-04 Pedro Alves Fix GDBserver Aarch64 Linux regression Luis noticed that the recent changes to gdbserver to make it track process and threads independently regressed a few gdb.multi/*.exp tests for aarch64-linux. We started seeing the following internal error for gdb.multi/multi-target-continue.exp for example: Starting program: binutils-gdb/gdb/testsuite/outputs/gdb.multi/multi-target-continue/multi-target-continue ^M Error in re-setting breakpoint 2: Remote connection closed^M ../../../repos/binutils-gdb/gdb/thread.c:85: internal-error: inferior_thread: Assertion `current_thread_ != nullptr' failed.^M A problem internal to GDB has been detected,^M further debugging may prove unreliable. A backtrace looks like: #0 thread_regcache_data (thread=thread@entry=0x0) at ../../../repos/binutils-gdb/gdbserver/inferiors.cc:120 #1 0x0000aaaaaaabf0e8 in get_thread_regcache (thread=0x0, fetch=fetch@entry=0) at ../../../repos/binutils-gdb/gdbserver/regcache.cc:31 #2 0x0000aaaaaaad785c in is_64bit_tdesc () at ../../../repos/binutils-gdb/gdbserver/linux-aarch64-low.cc:194 #3 0x0000aaaaaaad8a48 in aarch64_target::sw_breakpoint_from_kind (this=, kind=4, size=0xffffffffef04) at ../../../repos/binutils-gdb/gdbserver/linux-aarch64-low.cc:3226 #4 0x0000aaaaaaabe220 in bp_size (bp=0xaaaaaab6f3d0) at ../../../repos/binutils-gdb/gdbserver/mem-break.cc:226 #5 check_mem_read (mem_addr=187649984471104, buf=buf@entry=0xaaaaaab625d0 "\006", mem_len=mem_len@entry=56) at ../../../repos/binutils-gdb/gdbserver/mem-break.cc:1862 #6 0x0000aaaaaaacc660 in read_inferior_memory (memaddr=, myaddr=0xaaaaaab625d0 "\006", len=56) at ../../../repos/binutils-gdb/gdbserver/target.cc:93 #7 0x0000aaaaaaac3d9c in gdb_read_memory (len=56, myaddr=0xaaaaaab625d0 "\006", memaddr=187649984471104) at ../../../repos/binutils-gdb/gdbserver/server.cc:1071 #8 gdb_read_memory (memaddr=187649984471104, myaddr=0xaaaaaab625d0 "\006", len=56) at ../../../repos/binutils-gdb/gdbserver/server.cc:1048 #9 0x0000aaaaaaac82a4 in process_serial_event () at ../../../repos/binutils-gdb/gdbserver/server.cc:4307 #10 handle_serial_event (err=, client_data=) at ../../../repos/binutils-gdb/gdbserver/server.cc:4520 #11 0x0000aaaaaaafbcd0 in gdb_wait_for_event (block=block@entry=1) at ../../../repos/binutils-gdb/gdbsupport/event-loop.cc:700 #12 0x0000aaaaaaafc0b0 in gdb_wait_for_event (block=1) at ../../../repos/binutils-gdb/gdbsupport/event-loop.cc:596 #13 gdb_do_one_event () at ../../../repos/binutils-gdb/gdbsupport/event-loop.cc:237 #14 0x0000aaaaaaacacb0 in start_event_loop () at ../../../repos/binutils-gdb/gdbserver/server.cc:3518 #15 captured_main (argc=4, argv=) at ../../../repos/binutils-gdb/gdbserver/server.cc:3998 #16 0x0000aaaaaaab66dc in main (argc=, argv=) at ../../../repos/binutils-gdb/gdbserver/server.cc:4084 This sequence of functions is invoked due to a series of conditions: 1 - The probe-based breakpoint mechanism failed (for some reason) so ... 2 - ... gdbserver has to know what type of architecture it is dealing with so it can pick the right breakpoint kind, so it wants to check if we have a 64-bit target. 3 - To determine the size of a register, we currently fetch the current thread's register cache, and the current thread pointer is now nullptr. In #3, the current thread is nullptr because gdb_read_memory clears it on purpose, via set_desired_process, exactly to expose code relying on the current thread when it shouldn't. It was always possible to end up in this situation (when the current thread exits), but it was harder to reproduce before. This commit fixes it by tweaking is_64bit_tdesc to look at the current process's tdesc instead of the current thread's tdesc. Note that the thread's tdesc is itself filled from the process's tdesc, so this should be equivalent: struct regcache * get_thread_regcache (struct thread_info *thread, int fetch) { struct regcache *regcache; regcache = thread_regcache_data (thread); ... if (regcache == NULL) { struct process_info *proc = get_thread_process (thread); gdb_assert (proc->tdesc != NULL); regcache = new_register_cache (proc->tdesc); set_thread_regcache_data (thread, regcache); } ... Change-Id: Ibc809d7345e70a2f058b522bdc5cdbdca97e2cdc 2022-05-04 Simon Marchi gdb/remote: send qSymbol to all inferiors on startup start_remote_1 calls remote_check_symbols after things are set up to give the remote side a chance to look up symbols. One call to remote_check_symbols sets the "general thread", if needed, and sends one qSymbol packet. However, a remote target could have more than one process on initial connection, and this would send a qSymbol for only one of these processes. Change it to iterate on all the target's inferiors and send a qSymbol packet for each one. I tested this by changing gdbserver to spawn two processes on startup: diff --git a/gdbserver/server.cc b/gdbserver/server.cc index 33c42714e72..9b682e9f85f 100644 --- a/gdbserver/server.cc +++ b/gdbserver/server.cc @@ -3939,6 +3939,7 @@ captured_main (int argc, char *argv[]) /* Wait till we are at first instruction in program. */ target_create_inferior (program_path.get (), program_args); + target_create_inferior (program_path.get (), program_args); /* We are now (hopefully) stopped at the first instruction of the target process. This assumes that the target process was Instead of hacking GDBserver, it should also be possible to test this by starting manually two inferiors on an "extended-remote" connection, disconnecting from GDBserver (with the disconnect command), and re-connecting. I was able to see qSymbol being sent for each inferior: [remote] Sending packet: $Hgp828dc.828dc#1f [remote] Packet received: OK [remote] Sending packet: $qSymbol::#5b [remote] Packet received: qSymbol:6764625f6167656e745f6764625f74705f686561705f627566666572 [remote] Sending packet: $qSymbol::6764625f6167656e745f6764625f74705f686561705f627566666572#1e [remote] Packet received: qSymbol:6e70746c5f76657273696f6e [remote] Sending packet: $qSymbol::6e70746c5f76657273696f6e#4d [remote] Packet received: OK [remote] Sending packet: $Hgp828dd.828dd#21 [remote] Packet received: OK [remote] Sending packet: $qSymbol::#5b [remote] Packet received: qSymbol:6764625f6167656e745f6764625f74705f686561705f627566666572 [remote] Sending packet: $qSymbol::6764625f6167656e745f6764625f74705f686561705f627566666572#1e [remote] Packet received: qSymbol:6e70746c5f76657273696f6e [remote] Sending packet: $qSymbol::6e70746c5f76657273696f6e#4d [remote] Packet received: OK Note that there would probably be more work to be done to fully support this scenario, more things that need to be done for each discovered inferior instead of just for one. Change-Id: I21c4ecf6367391e2e389b560f0b4bd906cf6472f 2022-05-04 Simon Marchi gdb/remote: iterate on pspace inferiors in remote_new_objfile Commit 152a17495663 ("gdb: prune inferiors at end of fetch_inferior_event, fix intermittent failure of gdb.threads/fork-plus-threads.exp") broke some tests with the native-gdbserver board, such as: (gdb) PASS: gdb.base/step-over-syscall.exp: detach-on-fork=off: follow-fork=child: break cond on target : vfork: break marker continue^M Continuing.^M terminate called after throwing an instance of 'gdb_exception_error'^M I can manually reproduce the issue by running (just the commands that the test does as a one liner): $ ./gdb -q --data-directory=data-directory \ testsuite/outputs/gdb.base/step-over-syscall/step-over-vfork \ -ex "tar rem | ../gdbserver/gdbserver - testsuite/outputs/gdb.base/step-over-syscall/step-over-vfork" \ -ex "b main" \ -ex c \ -ex "d 1" \ -ex "set displaced-stepping off" \ -ex "b *0x7ffff7d7ac5a if main == 0" \ -ex "set detach-on-fork off" \ -ex "set follow-fork-mode child" \ -ex c \ -ex "inferior 1" \ -ex "b marker" \ -ex c ... where 0x7ffff7d7ac5a is the exact address of the vfork syscall (which can be found by looking at gdb.log). The important part of the above is that a vfork syscall creates inferior 2, then inferior 2 executes until exit, then we switch back to inferior 1 and try to resume it. The uncaught exception happens here: #4 0x00005596969d81a9 in error (fmt=0x559692da9e40 "Cannot execute this command while the target is running.\nUse the \"interrupt\" command to stop the target\nand then try again.") at /home/simark/src/binutils-gdb/gdbsupport/errors.cc:43 #5 0x0000559695af6f66 in remote_target::putpkt_binary (this=0x617000038080, buf=0x559692da4380 "qSymbol::", cnt=9) at /home/simark/src/binutils-gdb/gdb/remote.c:9560 #6 0x0000559695af6aaf in remote_target::putpkt (this=0x617000038080, buf=0x559692da4380 "qSymbol::") at /home/simark/src/binutils-gdb/gdb/remote.c:9518 #7 0x0000559695ab50dc in remote_target::remote_check_symbols (this=0x617000038080) at /home/simark/src/binutils-gdb/gdb/remote.c:5141 #8 0x0000559695b3cccf in remote_new_objfile (objfile=0x0) at /home/simark/src/binutils-gdb/gdb/remote.c:14600 #9 0x0000559693bc52a9 in std::__invoke_impl (__f=@0x61b0000167f8: 0x559695b3cb1d ) at /usr/include/c++/11.2.0/bits/invoke.h:61 #10 0x0000559693bb2848 in std::__invoke_r (__fn=@0x61b0000167f8: 0x559695b3cb1d ) at /usr/include/c++/11.2.0/bits/invoke.h:111 #11 0x0000559693b8dddf in std::_Function_handler::_M_invoke(std::_Any_data const&, objfile*&&) (__functor=..., __args#0=@0x7ffe0bae0590: 0x0) at /usr/include/c++/11.2.0/bits/std_function.h:291 #12 0x00005596956374b2 in std::function::operator()(objfile*) const (this=0x61b0000167f8, __args#0=0x0) at /usr/include/c++/11.2.0/bits/std_function.h:560 #13 0x0000559695633c64 in gdb::observers::observable::notify (this=0x55969ef5c480 , args#0=0x0) at /home/simark/src/binutils-gdb/gdb/../gdbsupport/observable.h:150 #14 0x0000559695df6cc2 in clear_symtab_users (add_flags=...) at /home/simark/src/binutils-gdb/gdb/symfile.c:2873 #15 0x000055969574c263 in program_space::~program_space (this=0x6120000c8a40, __in_chrg=) at /home/simark/src/binutils-gdb/gdb/progspace.c:154 #16 0x0000559694fc086b in delete_inferior (inf=0x61700003bf80) at /home/simark/src/binutils-gdb/gdb/inferior.c:205 #17 0x0000559694fc341f in prune_inferiors () at /home/simark/src/binutils-gdb/gdb/inferior.c:390 #18 0x0000559695017ada in fetch_inferior_event () at /home/simark/src/binutils-gdb/gdb/infrun.c:4293 #19 0x0000559694f629e6 in inferior_event_handler (event_type=INF_REG_EVENT) at /home/simark/src/binutils-gdb/gdb/inf-loop.c:41 #20 0x0000559695b3b0e3 in remote_async_serial_handler (scb=0x6250001ef100, context=0x6170000380a8) at /home/simark/src/binutils-gdb/gdb/remote.c:14466 #21 0x0000559695c59eb7 in run_async_handler_and_reschedule (scb=0x6250001ef100) at /home/simark/src/binutils-gdb/gdb/ser-base.c:138 #22 0x0000559695c5a42a in fd_event (error=0, context=0x6250001ef100) at /home/simark/src/binutils-gdb/gdb/ser-base.c:189 #23 0x00005596969d9ebf in handle_file_event (file_ptr=0x60700005af40, ready_mask=1) at /home/simark/src/binutils-gdb/gdbsupport/event-loop.cc:574 #24 0x00005596969da7fa in gdb_wait_for_event (block=0) at /home/simark/src/binutils-gdb/gdbsupport/event-loop.cc:700 #25 0x00005596969d8539 in gdb_do_one_event () at /home/simark/src/binutils-gdb/gdbsupport/event-loop.cc:212 If I enable "set debug infrun" just before the last continue, we see: (gdb) continue Continuing. [infrun] clear_proceed_status_thread: 965604.965604.0 [infrun] proceed: enter [infrun] proceed: addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT [infrun] scoped_disable_commit_resumed: reason=proceeding [infrun] start_step_over: enter [infrun] start_step_over: stealing global queue of threads to step, length = 0 [infrun] operator(): step-over queue now empty [infrun] start_step_over: exit [infrun] resume_1: step=0, signal=GDB_SIGNAL_0, trap_expected=0, current thread [965604.965604.0] at 0x7ffff7d7ac5c [infrun] do_target_resume: resume_ptid=965604.0.0, step=0, sig=GDB_SIGNAL_0 [infrun] prepare_to_wait: prepare_to_wait [infrun] reset: reason=proceeding [infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target remote [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target remote [infrun] proceed: exit [infrun] fetch_inferior_event: enter [infrun] scoped_disable_commit_resumed: reason=handling event [infrun] do_target_wait: Found 2 inferiors, starting at #1 [infrun] random_pending_event_thread: None found. [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) = [infrun] print_target_wait_results: 965604.965604.0 [Thread 965604.965604], [infrun] print_target_wait_results: status->kind = VFORK_DONE [infrun] handle_inferior_event: status->kind = VFORK_DONE [infrun] context_switch: Switching context from 0.0.0 to 965604.965604.0 [infrun] handle_vfork_done: not waiting for a vfork-done event [infrun] start_step_over: enter [infrun] start_step_over: stealing global queue of threads to step, length = 0 [infrun] operator(): step-over queue now empty [infrun] start_step_over: exit [infrun] resume_1: step=0, signal=GDB_SIGNAL_0, trap_expected=0, current thread [965604.965604.0] at 0x7ffff7d7ac5c [infrun] do_target_resume: resume_ptid=965604.0.0, step=0, sig=GDB_SIGNAL_0 [infrun] prepare_to_wait: prepare_to_wait [infrun] reset: reason=handling event [infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target remote [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target remote terminate called after throwing an instance of 'gdb_exception_error' What happens is: - After doing the "continue" on inferior 1, the remote target gives us a VFORK_DONE event. The core ignores it and resumes inferior 1. - Since prune_inferiors is now called after each handled event, in fetch_inferior_event, it is called after we handled that VFORK_DONE event and resumed inferior 1. - Inferior 2 is pruned, which (see backtrace above) causes its program space to be deleted, which clears the symtabs for that program space, which calls the new_objfile observable and remote_new_objfile observer (with a nullptr objfile, to indicate that the previously loaded symbols have been discarded), which calls remote_check_symbols. remote_check_symbols is the function that sends the qSymbol packet, to let the remote side ask for symbol addresses. The problem is that the remote target is working in all-stop / sync mode and is currently resumed. It has sent a vCont packet to resume the target and is waiting for a stop reply. It can't send any packets in the mean time. That causes the exception to be thrown. This wasn't a problem before, when prune_inferiors was called in normal_stop, because it was always called at a time the target was not resumed. An important observation here is that the new_objfile observable is invoked for a change in inferior 2's program space (inferior 2's program space is the current program space). Inferior 2 isn't bound to any process on the remote side (it has exited, that's why it's being pruned). It doesn't make sense to try to send a qSymbol packet for a process that doesn't exist on the remote side. remote_check_symbols actually attempts to avoid that: /* The remote side has no concept of inferiors that aren't running yet, it only knows about running processes. If we're connected but our current inferior is not running, we should not invite the remote target to request symbol lookups related to its (unrelated) current process. */ if (!target_has_execution ()) return; The problem here is that while inferior 2's program space is the current program space, inferior 1 is the current inferior. So the check above passes, since inferior has execution. We therefore try to send a qSymbol packet for inferior 1 in reaction to a change in inferior 2's program space, that's wrong. This exposes a conceptual flaw in remote_new_objfile. The "new_objfile" event concerns a specific program space, which can concern multiple inferiors, as inferiors can share a program space. We shouldn't consider the current inferior at all, but instead all inferiors bound to the affected program space. Especially since the current inferior can be unrelated to the current program space at that point. To be clear, we are in this state because ~program_space sets itself as the current program space, but there is no more inferior having that program space to switch to, inferior 2 has already been unlinked. To fix this, make remote_new_objfile iterate on all inferiors bound to the affected program space. Remove the target_has_execution check from remote_check_symbols, replace it with an assert. All callers must ensure that the current inferior has execution before calling it. Change-Id: Ica643145bcc03115248290fd310cadab8ec8371c 2022-05-04 Jan Beulich Dwarf: rename yet another instance of "index" As before, on sufficiently old glibc this conflicts with a global identifier in the library headers. While there also zap the unusual padding by blanks. 2022-05-04 Martin Liska LTO plugin: sync header file with GCC include/ChangeLog: * plugin-api.h (enum ld_plugin_tag): Sync with GCC. 2022-05-04 Alan Modra PowerPC32 treatment of absolute symbols As already done for PowerPC64, fix dynamic relocs for absolute symbols. The patch also tidies the dynamic reloc handling code in check_relocs, removing leftover comments and code from when check_relocs was called as each object file was read in. bfd/ * elf32-ppc.c (ppc_elf_check_relocs): Set isym and ifunc earlier. Rearrange tests for dynamic relocs, handling absolute symbols. (allocate_dynrelocs): Don't allocate dynamic relocs for locally defined absolute symbols. (ppc_elf_size_dynamic_sections): Similarly. (ppc_elf_relocate_section): Similarly. ld/ * testsuite/ld-powerpc/abs32-pie.d, * testsuite/ld-powerpc/abs32-pie.r, * testsuite/ld-powerpc/abs32-reloc.s, * testsuite/ld-powerpc/abs32-shared.d, * testsuite/ld-powerpc/abs32-shared.r, * testsuite/ld-powerpc/abs32-static.d, * testsuite/ld-powerpc/abs32-static.r: New tests. * testsuite/ld-powerpc/powerpc.exp: Run them. 2022-05-04 John Baldwin gdbserver: Fix build after adding tls feature to arm tdesc. 2022-05-04 GDB Administrator Automatic date update in version.in 2022-05-04 John Baldwin NEWS: Add a note for TLS support on FreeBSD/arm and FreeBSD/Aarch64. Read the tpidr register from NT_ARM_TLS on Linux. gdbserver: Read the tpidr register from NT_ARM_TLS on Linux. Read the tpidr register from NT_ARM_TLS core dump notes on Linux Aarch64. Fetch the NT_ARM_TLS register set for native FreeBSD/Aarch64 processes. This permits resolving TLS variables. Support TLS variables on FreeBSD/Aarch64. Derive the pointer to the DTV array from the tpidr register. Read the tpidr register from NT_ARM_TLS core dump notes on FreeBSD/Aarch64. Add an aarch64-tls feature which includes the tpidr register. Fetch the NT_ARM_TLS register set for native FreeBSD/arm processes. This permits resolving TLS variables. Support TLS variables on FreeBSD/arm. Derive the pointer to the DTV array from the tpidruro register. Read the tpidruro register from NT_ARM_TLS core dump notes on FreeBSD/arm. Add an arm-tls feature which includes the tpidruro register from CP15. fbsd-nat: Add helper routines for register sets using PT_[G]SETREGSET. FreeBSD's kernel has recently added PT_GETREGSET and PT_SETREGSET operations to fetch a register set named by an ELF note type. These helper routines provide helpers to check for a register set's existence, fetch registers for a register set, and store registers to a register set. 2022-05-03 H.J. Lu ld: Regenerate aclocal.m4 with automake 1.15.1 * aclocal.m4: Regenerate with automake 1.15.1. 2022-05-03 Pedro Alves gdbserver: track current process as well as current thread The recent commit 421490af33bf ("gdbserver/linux: Access memory even if threads are running") caused a regression in gdb.threads/access-mem-running-thread-exit.exp with gdbserver, which I somehow missed. Like so: (gdb) print global_var Cannot access memory at address 0x555555558010 (gdb) FAIL: gdb.threads/access-mem-running-thread-exit.exp: non-stop: access mem (print global_var after writing, inf=2, iter=1) The problem starts with GDB telling GDBserver to select a thread, via the Hg packet, which GDBserver complies with, then that thread exits, and GDB, without knowing the thread is gone, tries to write to memory, through the context of the previously selected Hg thread. GDBserver's GDB-facing memory access routines, gdb_read_memory and gdb_write_memory, call set_desired_thread to make GDBserver re-select the thread that GDB has selected with the Hg packet. Since the thread is gone, set_desired_thread returns false, and the memory access fails. Now, to access memory, it doesn't really matter which thread is selected. All we should need is the target process. Even if the thread that GDB previously selected is gone, and GDB does not yet know about that exit, it shouldn't matter, GDBserver should still know which process that thread belonged to. Fix this by making GDBserver track the current process separately, like GDB also does. Add a new set_desired_process routine that is similar to set_desired_thread, but just sets the current process, leaving the current thread as NULL. Use it in the GDB-facing memory read and write routines, to avoid failing if the selected thread is gone, but the process is still around. Change-Id: I4ff97cb6f42558efbed224b30d5c71f6112d44cd 2022-05-03 Pedro Alves Fix gdb.threads/access-mem-running-thread-exit.exp w/ native-extended-gdbserver When testing gdb.threads/access-mem-running-thread-exit.exp with --target_board=native-extended-gdbserver, we get: Running gdb.threads/access-mem-running-thread-exit.exp ... FAIL: gdb.threads/access-mem-running-thread-exit.exp: non-stop: second inferior: runto: run to main WARNING: Timed out waiting for EOF in server after monitor exit === gdb Summary === # of expected passes 3 # of unexpected failures 1 # of unsupported tests 1 The problem is that the testcase spawns a second inferior with -no-connection, and then runto_main does "run", which fails like so: (gdb) run Don't know how to run. Try "help target". (gdb) FAIL: gdb.threads/access-mem-running-thread-exit.exp: non-stop: second inferior: runto: run to main That "run" above failed because native-extended-gdbserver forces "set auto-connect-native-target off", to prevent testcases from mistakenly running programs with the native target, which would exactly be the case here. Fix this by letting the second inferior share the first inferior's connection everywhere except on targets that do reload on run (e.g., --target_board=native-gdbserver). Change-Id: Ib57105a238cbc69c57220e71261219fa55d329ed 2022-05-03 Andrew Burgess gdb: add some additional thread status debug output While working on this patch: https://sourceware.org/pipermail/gdb-patches/2022-January/185109.html I found it really useful to print the executing/resumed status of all threads (or all threads in a particular inferior) at various places (e.g. when a new inferior is started, when GDB attaches, etc). This debug was originally part of the above patch, but I wanted to rewrite this as a separate patch and move the code into a new function in infrun.h, which is what this patch does. Unless 'set debug infrun on' is in effect, then there should be no user visible changes after this commit. 2022-05-03 Nick Clifton Add a linker warning when creating potentially dangerous executable segments. Add tests, options to disabke and configure switches to choose defaults. Fix potential arithmetic overflow in the linker's plugin handling code. PR 29101 * libdep_plugin.c (get_libdeps): Check for overflow when computing amount of memory to allocate. 2022-05-03 Andrew Burgess objdump: fix styled printing of addresses Previous work to add styled disassembler output missed a case in objdump_print_addr, which is fixed in this commit. 2022-05-03 Andrew Burgess gdb/testsuite: small cleanup in mi-break-qualified.exp It is not necessary to pass an empty string to mi_gdb_start, passing the empty string is equivalent to passing no arguments, which is what we do everywhere else (that we don't need to specify an actual argument). The only place we use 'mi_gdb_start ""' is in gdb.mi/mi-break-qualified.exp, so in this commit I just replace that with a call to 'mi_gdb_start' - just for consistency. There should be no change in what is tested after this commit. 2022-05-03 Andrew Burgess gdb/testsuite: change mi_gdb_start to take a list of flags After this previous commit I was thinking about the API of mi_gdb_start. I felt that the idea of passing flags as separate arguments and using 'args' to gather these into a list, though clever, was not an intuitive API. In this commit I modify mi_gdb_start so that it expects a single argument, which should be a list of flags. Thus, where we previously would have said: mi_gdb_start separate-mi-tty separate-inferior-tty We would now say: mi_gdb_start { separate-mi-tty separate-inferior-tty } However, it turns out we never actually call mi_gdb_start passing two arguments in this way at all. We do in some places do this: mi_gdb_start separate-inferior-tty But that's fine, a single string like this works equally well as a single item list, so this will not need updating. There is also one place where we do this: eval mi_gdb_start $start_ops where $start_ops is a list that might contains 0, 1, or 2 items. The eval here is used to expand the $start_ops list so mi_gdb_start sees the list contents as separate arguments. In this case we just need to drop the use of eval. I think that the new API is more intuitive, but others might disagree, in which case I can drop this change. There should be no change in what is tested after this commit. 2022-05-03 Andrew Burgess gdb/testsuite: fix mi-exec-run.exp with native-extended-gdbserver board When running with the native-extended-gdbserver board, I currently see one failure in gdb.mi/mi-exec-run.exp: FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=separate: mi=separate: force-fail=0: breakpoint hit reported on console (timeout) In this test the MI interface should be started in a separate tty, which means we should have a CLI tty and an MI tty, however, this is not happening. Instead GDB is just started in MI mode and there is no CLI tty. The test script tries to switch between the CLI an MI terminals and look for some expected output on each, however, as there is no CLI terminal the expected output never arrives, and the test times out. It turns out that this is not a GDB problem, rather, this is an issue with argument passing within the test script. The proc default_mi_gdb_start expects to take a set of flags (strings) as arguments, each of flag is expected to be a separate argument. The default_mi_gdb_start proc collects all its arguments into a list using the special 'args' parameter name, and then iterates over this list to see which flags were passed. In mi_gdb_start, which forwards to default_mi_gdb_start, the arguments are also gathered into the 'args' parameter list, but are then expanded back to be separate arguments using the eval trick, i.e.: proc mi_gdb_start { args } { return [eval default_mi_gdb_start $args] } This ensures that when we arrive in default_mi_gdb_start each flag is a separate argument, rather than appearing as a single list containing all arguments. When using the native-extended-gdbserver board however, the file boards/native-extended-gdbserver.exp is loaded, and this file replaces the default mi_gdb_start with its own version. This new mi_gdb_start also gathers the arguments into an 'args' list, but forgets to expand the arguments out using the eval trick. As a result, when using the native-extended-gdbserver board, by the time we get to default_mi_gdb_start, we end up with the args list containing a single item, which is a list containing all the arguments the user passed. What this means is that if the user passes two arguments, then, in default_mi_gdb_start, instead of seeing two separate arguments, we see a single argument made by concatenating the two arguments together. The only place this is a problem is in the test mi-exec-run.exp, which (as far as I can see) is the only test where we might try to pass both arguments at the same time. Currently we think we passed both arguments to mi_gdb_start, but mi_gdb_start behaves as if no arguments were passed. This commit fixes the problem by making use of the eval trick within the native-extended-gdbserver version of mi_gdb_start. After this, the FAIL listed at the top of this message is resolved. 2022-05-03 Andrew Burgess gdb: fix failures in gdb.mi/mi-exec-run.exp with native-extended-gdbserver When running the gdb.mi/mi-exec-run.exp test using the native-extended-gdbserver I see failures like this: FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=main: mi=main: force-fail=1: run failure detected FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=main: mi=separate: force-fail=1: run failure detected FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=separate: mi=separate: force-fail=1: run failure detected There's a race condition here, so you might see a slightly different set of failures, but I always see some from the 'run failure detected' test. NOTE: I also see an additional test failure: FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=separate: mi=separate: force-fail=0: breakpoint hit reported on console (timeout) but that is a completely different issue, and is not being addressed in this commit. The problem for the 'run failure detected' test is that we end up in gdb_expect looking for output from two spawn-ids, one from gdbserver, and one from gdb. We're looking for one output pattern from each spawn-id, and for the test to pass we need to see both patterns. Now, if gdb exits then this is a test failure (this would indicate gdb crashing, which is bad), so we have an eof pattern associated with the gdb spawn-id. However, in this particular test we expect gdbserver to fail to execute the binary (the test binary is set non-executable), and so we get an error message from gdbserver (which matches the pattern), and then gdbserver exits, this is expected. The problem is that after spotting the pattern from gdbserver, we often see the eof from gdbserver before we see the pattern from gdb. If this happens then we drop out of the gdb_expect without ever seeing the pattern from gdb, and fail the test. In this commit, I place the spawn-id of gdbserver into a global variable, and then use this global variable as the -i option within the gdb_expect. Now, once we have seen the expected pattern on the gdbserver spawn-id, the global variable is cleared. After this the gdb_expect no longer checks the gdbserver spawn-id for additional output, and so never sees the eof event. This leaves the gdb_expect running, which allows the pattern from gdb to be seen, and for the test to pass. I now see no failures relating to 'run failure detected'. 2022-05-03 GDB Administrator Automatic date update in version.in 2022-05-02 Tom de Vries [gdb/testsuite] Fix gdb.cp/align.exp with gcc 12.1 / 11.3 Starting with gcc 12.1 / gcc 11.3, for test-case gdb.cp/align.exp we run into: ... align.cc:29:23: error: invalid application of 'alignof' to a void type^M 29 | unsigned a_void = alignof (void);^M | ^~~~~~~~~~~~~~^M ... Fix this by using __alignof__ instead. Tested on x86_64-linux, with gcc 7.5.0, gcc 12.1 and clang 12.0.1. 2022-05-02 Aaron Merey gdb/debuginfod: Whitespace-only URL should disable debuginfod Currently debuginfod is disabled when the string of server URLs is unset or set to be the empty string (via the $DEBUGINFOD_URLS environment variable or the 'set debuginfod urls' gdb command). Extend this functionality so that a whitespace-only URL also disables debuginfod. Modify a testcase to verify that a whitespace-only URL disables debuginfod. 2022-05-02 Simon Marchi gdb: remove type_wanted parameter from a few functions The type_wanted value, passed down to the create_sals_from_location callback, is never used. Remove it. Change-Id: Ic363ee13f6af593a3e875ff7fe46de130cdc190c 2022-05-02 Simon Marchi gnulib: update to bd11400942d6 Update the gnulib import to fixes these issues: - GDB build with clang + glibc < 2.33. https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=d6a07b4dc21b3118727743142c678858df442853 https://lists.gnu.org/archive/html/bug-gnulib/2022-04/msg00072.html With glibc < 2.33, gnulib (since relatively recently) enables a replacement for free (see gnulib/import/m4/free.m4). In that path, clang shows this error: make[2]: Entering directory '/home/smarchi/build/binutils-gdb-clang/gdbsupport' CXX agent.o In file included from /home/smarchi/src/binutils-gdb/gdbsupport/agent.cc:20: In file included from /home/smarchi/src/binutils-gdb/gdbsupport/common-defs.h:95: ../gnulib/import/string.h:636:19: error: exception specification in declaration does not match previous declaration _GL_EXTERN_C void free (void *) throw (); ^ ../gnulib/import/stdlib.h:737:17: note: expanded from macro 'free' # define free rpl_free ^ ../gnulib/import/stdlib.h:739:1: note: previous declaration is here _GL_FUNCDECL_RPL (free, void, (void *ptr)); ^ ../gnulib/import/sys/select.h:251:23: note: expanded from macro '_GL_FUNCDECL_RPL' _GL_FUNCDECL_RPL_1 (rpl_##func, rettype, parameters_and_attributes) ^ :139:1: note: expanded from here rpl_free ^ The gnulib commit mentioned fixes the exception specification of `free`. - GDB build on RHEL 7: CC libgnu_a-openat-proc.o In file included from /usr/include/string.h:633, from ./string.h:41, from ../../../binutils-gdb/gnulib/import/openat-proc.c:30: ./string.h:1105:1: error: expected identifier or '(' before '__extension__' 1105 | _GL_FUNCDECL_SYS (strndup, char *, | ^~~~~~~~~~~~~~~~ https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=84863a1c4dc8cca8fb0f6f670f67779cdd2d543b https://lists.gnu.org/archive/html/bug-gnulib/2022-04/msg00075.html Change-Id: Ibd51302feece6f385d0c53e0d08921b5d95e2776 2022-05-02 Tom Tromey Fix Ada catchpoint regression The breakpoint C++-ification series introduced a regression for Ada catchpoints. Specifically, commit 2b5ab5b8 ("Convert base breakpoints to vtable ops") caused these to start failing. I didn't notice this because testing Ada using a Linux distro compiler requires installing the GNAT debuginfo, which I hadn't done. This patch fixes the problem. I'm checking it in. 2022-05-02 GDB Administrator Automatic date update in version.in 2022-05-01 Tom de Vries [gdb/testsuite] Fix gdb.multi/attach-no-multi-process.exp with check-readmore When running test-case gdb.multi/attach-no-multi-process.exp with check-readmore, I get: ... (gdb) attach 13411^M Attaching to Remote target^M No unwaited-for children left.^M (gdb) Reading symbols from attach-no-multi-process...^M Reading symbols from /lib64/libm.so.6...^M (No debugging symbols found in /lib64/libm.so.6)^M Reading symbols from /lib64/libc.so.6...^M (No debugging symbols found in /lib64/libc.so.6)^M Reading symbols from /lib64/ld-linux-x86-64.so.2...^M (No debugging symbols found in /lib64/ld-linux-x86-64.so.2)^M 0x00007f5df1fffc8a in clock_nanosleep@GLIBC_2.2.5 () from /lib64/libc.so.6^M FAIL: gdb.multi/attach-no-multi-process.exp: target_non_stop=off: \ attach to the program via remote (timeout) ... The problem is that the attach output is matched using gdb_test, which uses the '$gdb_prompt $' regexp, and this does not handle the case that '(gdb) ' is not the last available output. Fix this by using a gdb_test_multiple instead with a '$gdb_prompt ' regexp, so without the '$' anchor. Tested on x86_64-linux with native, check-read1 and check-readmore. 2022-05-01 GDB Administrator Automatic date update in version.in 2022-04-30 Thomas Hebb opcodes: don't assume ELF in riscv, csky, rl78, mep disassemblers Currently, the get_disassembler() implementations for riscv, csky, and rl78--and mep_print_insn() for mep--access ELF variants of union fields without first checking that the bfd actually represents an ELF. This causes undefined behavior and crashes when disassembling non-ELF files (the "binary" BFD, for example). Fix that. 2022-04-30 GDB Administrator Automatic date update in version.in 2022-04-29 Tom Tromey Remove create_breakpoints_sal_default create_breakpoints_sal_default is just a simple wrapper, so remove it. Remove allocate_bp_location allocate_bp_location is just a small wrapper for a method call, so inline it everywhere. Constify breakpoint_ops Now that all breakpoint_ops are statically initialized, they can all be made const. Remove breakpoint ops initialization initialize_breakpoint_ops does not do much any more, so remove it in favor of statically-initialize objects. Remove vtable_breakpoint_ops There's no need to have vtable_breakpoint_ops any more, so remove it in favor of base_breakpoint_ops. Remove most fields from breakpoint_ops At this point, all implementations of breakpoints use the vtable. So, we can now remove most function pointers from breakpoint_ops and switch to using methods directly in the callers. Only the two "static virtual" methods remain in breakpoint_ops. Remove breakpoint_ops from init_catchpoint init_catchpoint is only ever passed a single breakpoint_ops pointer, so remove the parameter. Remove breakpoint_ops from init_ada_exception_breakpoint init_ada_exception_breakpoint is only ever passed a single breakpoint_ops structure, so remove the parameter. 2022-04-29 Tom Tromey Merge probe and ordinary tracepoints Right now, probe tracepoints are handled by a separate ops object. However, they differ only in a small way from ordinary tracepoints, and furthermore can be distinguished by their event location. This patch merges the two cases, just as was done for breakpoints. 2022-04-29 Tom Tromey Merge probe and ordinary breakpoints Right now, probe breakpoints are handled by a separate ops object. However, they differ only in a small way from ordinary breakpoints, and furthermore can be distinguished by their "probe" object. This patch merges the two cases. This avoids having to introduce a new bp_ constant (which can be quite subtle to do correctly) and a new subclass. 2022-04-29 Tom Tromey Remove bkpt_base_breakpoint_ops An earlier patch removed the last use of bkpt_base_breakpoint_ops, so remove the object entirely. Convert static marker tracepoints to vtable ops This converts static marker tracepoints to use vtable_breakpoint_ops. Add bp_static_marker_tracepoint Because the actual construction of a breakpoint is buried deep in create_breakpoint, at present it's necessary to have a new bp_ enumerator constant any time a new subclass is needed. Static marker tracepoints are one such case, so this patch introduces bp_static_marker_tracepoint and updates various spots to recognize it. Convert ranged breakpoints to vtable ops This converts ranged breakpoints to use vtable_breakpoint_ops. This requires introducing a new ranged_breakpoint type, but this is relatively simple because ranged breakpoints can only be created by break_range_command. Convert dprintf to vtable ops This converts dprintf to use vtable_breakpoint_ops. Convert Ada catchpoints to vtable ops This converts Ada catchpoints to use vtable_breakpoint_ops. Convert ordinary breakpoints to vtable ops This converts "ordinary" breakpoint to use vtable_breakpoint_ops. Recall that an ordinary breakpoint is both the kind normally created by users, and also a base class used by other classes. Change inheritance of dprintf The dprintf breakpoint ops is mostly a copy of bpkt_breakpoint_ops, except it's written out explicitly -- and, importantly, there's nothing that bpkt_breakpoint_ops overrides that dprintf does not. This changes dprintf to simply inherit directly, and updates struct dprintf_breakpoint to reflect the change as well. Convert momentary breakpoints to vtable ops This converts momentary breakpoints to use vtable_breakpoint_ops. Convert internal breakpoints to vtable ops This converts internal breakpoints to use vtable_breakpoint_ops. Convert break-catch-throw to vtable ops This converts break-catch-throw.c to use vtable_breakpoint_ops. Convert base breakpoints to vtable ops This converts base breakpoints to use vtable_breakpoint_ops. 2022-04-29 Tom Tromey Add some new subclasses of breakpoint This adds a few new subclasses of breakpoint. The inheritance hierarchy is chosen to reflect what's already present in initialize_breakpoint_ops -- it mirrors the way that the _ops structures are filled in. This patch also changes new_breakpoint_from_type to create the correct sublcass based on bptype. This is important due to the somewhat inverted way in which create_breakpoint works; and in particular later patches will change some of these entries. 2022-04-29 Tom Tromey Convert tracepoints to vtable ops This converts tracepoints to use vtable_breakpoint_ops. Convert watchpoints to vtable ops This converts watchpoints and masked watchpoints. to use vtable_breakpoint_ops. For masked watchpoints, a new subclass must be introduced, and watch_command_1 is changed to create one. Convert break-catch-load to vtable ops This converts break-catch-load.c to use vtable_breakpoint_ops. Convert break-catch-fork to vtable ops This converts break-catch-fork.c to use vtable_breakpoint_ops. Convert break-catch-exec to vtable ops This converts break-catch-exec.c to use vtable_breakpoint_ops. Convert break-catch-syscall to vtable ops This converts break-catch-syscall.c to use vtable_breakpoint_ops. Convert break-catch-sig to use vtable ops This converts break-catch-sig.c to use vtable_breakpoint_ops. 2022-04-29 Tom Tromey Add a vtable-based breakpoint ops This adds methods to struct breakpoint. Each method has a similar signature to a corresponding function in breakpoint_ops, with the exceptions of create_sals_from_location and create_breakpoints_sal, which can't be virtual methods on breakpoint -- they are only used during the construction of breakpoints. Then, this adds a new vtable_breakpoint_ops structure and populates it with functions that simply forward a call from breakpoint_ops to the corresponding virtual method. These are all done with lambdas, because they are just a stepping stone -- by the end of the series, this structure will be deleted. 2022-04-29 Tom Tromey Return bool from breakpoint_ops::print_one This changes breakpoint_ops::print_one to return bool, and updates all the implementations and the caller. The caller is changed so that a NULL check is no longer needed -- something that will be impossible with a real method. Delete some unnecessary wrapper functions This patch deletes a few unnecessary wrapper functions from breakpoint.c. Add an assertion to clone_momentary_breakpoint This adds an assertion to clone_momentary_breakpoint. This will eventually be removed, but in the meantime is is useful for helping convince oneself that momentary breakpoints will always use momentary_breakpoint_ops. This understanding will help when cleaning up the code later. Boolify print_solib_event Change print_solib_event to accept a bool parameter and update the callers. Move "catch load" to a new file The "catch load" code is reasonably self-contained, and so this patch moves it out of breakpoint.c and into a new file, break-catch-load.c. One function from breakpoint.c, print_solib_event, now has to be exposed, but this seems pretty reasonable. 2022-04-29 Vladimir Mezentsev gprofng: assertion in gprofng/src/Expression.cc:139 gprofng/ChangeLog 2022-04-28 Vladimir Mezentsev PR gprofng/29102 * src/Expression.h: Remove fixupValues. * src/Expression.cc (Expression::copy): Fix a bug. 2022-04-29 Tom Tromey De-duplicate .gdb_index This de-duplicates variables and types in .gdb_index, making the new index closer to what gdb generated before the new DWARF scanner series. Spot-checking the resulting index for gdb itself, it seems that the new scanner picks up some extra symbols not detected by the old one. I tested both the new and old versions of gdb on both new and old versions of the index, and startup time in all cases is roughly the same (it's worth noting that, for gdb itself, the index no longer provides any benefit over the DWARF scanner). So, I think this fixes the size issue with the new index writer. Regression tested on x86-64 Fedora 34. 2022-04-29 Tom Tromey Fix .debug_names regression with new indexer At AdaCore, we run the internal gdb test suite in several modes, including one using the .debug_names index. This caught a regression caused by the new DWARF indexer. First, the psymtabs-based .debug_names generator was completely wrong. However, to avoid making the rewrite series even bigger (fixing the writer will also require rewriting the .debug_names reader), it attempted to preserve the weirdness. However, this was not done properly. For example the old writer did this: - case STRUCT_DOMAIN: - return DW_TAG_structure_type; The new code, instead, simply preserves the actual DWARF tag -- but this makes future lookups fail, because the .debug_names reader only looks for DW_TAG_structure_type. This patch attempts to revert to the old behavior in the writer. 2022-04-29 Simon Marchi gdb/infrun: make fetch_inferior_event restore thread if exited or signalled Commit 152a1749566 ("gdb: prune inferiors at end of fetch_inferior_event, fix intermittent failure of gdb.threads/fork-plus-threads.exp") introduced some follow-fork-related test failures, such as: info inferiors^M Num Description Connection Executable ^M * 1 process 634972 1 (native) /home/simark/build/binutils-gdb-one-target/gdb/testsuite/outputs/gdb.base/foll-fork/foll-fork ^M 2 process 634975 1 (native) /home/simark/build/binutils-gdb-one-target/gdb/testsuite/outputs/gdb.base/foll-fork/foll-fork ^M (gdb) PASS: gdb.base/foll-fork.exp: follow-fork-mode=parent: detach-on-fork=off: cmd=next 2: test_follow_fork: info inferiors inferior 2^M [Switching to inferior 2 [process 634975] (/home/simark/build/binutils-gdb-one-target/gdb/testsuite/outputs/gdb.base/foll-fork/foll-fork)]^M [Switching to thread 2.1 (Thread 0x7ffff7c9a740 (LWP 634975))]^M #0 0x00007ffff7d7abf7 in _Fork () from /usr/lib/libc.so.6^M (gdb) PASS: gdb.base/foll-fork.exp: follow-fork-mode=parent: detach-on-fork=off: cmd=next 2: test_follow_fork: inferior 2 continue^M Continuing.^M [Inferior 2 (process 634975) exited normally]^M [Switching to Thread 0x7ffff7c9a740 (LWP 634972)]^M (gdb) PASS: gdb.base/foll-fork.exp: follow-fork-mode=parent: detach-on-fork=off: cmd=next 2: test_follow_fork: continue until exit at continue unfollowed inferior to end break callee^M Breakpoint 2 at 0x555555555160: file /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/foll-fork.c, line 9.^M (gdb) FAIL: gdb.base/foll-fork.exp: follow-fork-mode=parent: detach-on-fork=off: cmd=next 2: test_follow_fork: break callee What happens here is: - inferior 2 is selected - we continue, leading to inferior 2's exit - we set breakpoint, expect 2 locations, but only one location is resolved Reading between the lines, we understand that inferior 2 got pruned, when it shouldn't have been. The issue can be reproduced by hand with: $ ./gdb -q --data-directory=data-directory testsuite/outputs/gdb.base/foll-fork/foll-fork -ex "set detach-on-fork off" -ex start -ex "next 2" -ex "inferior 2" -ex "set debug infrun" ... Temporary breakpoint 1, main () at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/foll-fork.c:14 14 int v = 5; [New inferior 2 (process 637627)] [Thread debugging using libthread_db enabled] Using host libthread_db library "/usr/lib/../lib/libthread_db.so.1". 17 if (pid == 0) /* set breakpoint here */ [Switching to inferior 2 [process 637627] (/home/simark/build/binutils-gdb-one-target/gdb/testsuite/outputs/gdb.base/foll-fork/foll-fork)] [Switching to thread 2.1 (Thread 0x7ffff7c9a740 (LWP 637627))] #0 0x00007ffff7d7abf7 in _Fork () from /usr/lib/libc.so.6 (gdb) continue Continuing. [infrun] clear_proceed_status_thread: 637627.637627.0 [infrun] proceed: enter [infrun] proceed: addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT [infrun] scoped_disable_commit_resumed: reason=proceeding [infrun] start_step_over: enter [infrun] start_step_over: stealing global queue of threads to step, length = 0 [infrun] operator(): step-over queue now empty [infrun] start_step_over: exit [infrun] proceed: start: resuming threads, all-stop-on-top-of-non-stop [infrun] proceed: resuming 637627.637627.0 [infrun] resume_1: step=0, signal=GDB_SIGNAL_0, trap_expected=0, current thread [637627.637627.0] at 0x7ffff7d7abf7 [infrun] do_target_resume: resume_ptid=637627.637627.0, step=0, sig=GDB_SIGNAL_0 [infrun] infrun_async: enable=1 [infrun] prepare_to_wait: prepare_to_wait [infrun] proceed: end: resuming threads, all-stop-on-top-of-non-stop [infrun] reset: reason=proceeding [infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target native [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target native [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target native [infrun] proceed: exit [infrun] fetch_inferior_event: enter [infrun] scoped_disable_commit_resumed: reason=handling event [infrun] do_target_wait: Found 2 inferiors, starting at #1 [infrun] random_pending_event_thread: None found. [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) = [infrun] print_target_wait_results: 637627.637627.0 [process 637627], [infrun] print_target_wait_results: status->kind = EXITED, exit_status = 0 [infrun] handle_inferior_event: status->kind = EXITED, exit_status = 0 [Inferior 2 (process 637627) exited normally] [infrun] stop_waiting: stop_waiting [infrun] stop_all_threads: start: reason=presenting stop to user in all-stop, inf=-1 [infrun] stop_all_threads: pass=0, iterations=0 [infrun] stop_all_threads: 637624.637624.0 not executing [infrun] stop_all_threads: pass=1, iterations=1 [infrun] stop_all_threads: 637624.637624.0 not executing [infrun] stop_all_threads: done [infrun] stop_all_threads: end: reason=presenting stop to user in all-stop, inf=-1 [Switching to Thread 0x7ffff7c9a740 (LWP 637624)] [infrun] infrun_async: enable=0 [infrun] reset: reason=handling event [infrun] maybe_set_commit_resumed_all_targets: not requesting commit-resumed for target native, no resumed threads (gdb) [infrun] fetch_inferior_event: exit (gdb) info inferiors Num Description Connection Executable * 1 process 637624 1 (native) /home/simark/build/binutils-gdb-one-target/gdb/testsuite/outputs/gdb.base/foll-fork/foll-fork (gdb) i th Id Target Id Frame * 1 Thread 0x7ffff7c9a740 (LWP 637624) "foll-fork" main () at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/foll-fork.c:17 After handling the EXITED event for inferior 2, inferior 2 should have stayed the current inferior, which should have prevented it from getting pruned. When debugging, we find that when getting at the prune_inferiors call, the current inferior is inferior 1. Further debugging shows that prior to the call to clean_up_just_stopped_threads_fsms, the current inferior is inferior 2, and after, it's inferior 1. Then, back in fetch_inferior_event, the restore_thread object is disabled, due to: /* If we got a TARGET_WAITKIND_NO_RESUMED event, then the previously selected thread is gone. We have two choices - switch to no thread selected, or restore the previously selected thread (now exited). We chose the later, just because that's what GDB used to do. After this, "info threads" says "The current thread has terminated." instead of "No thread selected.". */ if (!non_stop && cmd_done && ecs->ws.kind () != TARGET_WAITKIND_NO_RESUMED) restore_thread.dont_restore (); So in the end, inferior 1 stays current, and inferior 2 gets wrongfully pruned. I'd say clean_up_just_stopped_threads_fsms is the culprit here. It actually attempts to restore the event_thread to be current at the end, after the loop (I presume the current thread on entry is always supposed to be the event thread). But in this case, the event is of kind EXITED, and ecs->event_thread is not set, so the current inferior isn't restored. Fix that by using scoped_restore_current_thread. If there is no current thread, scoped_restore_current_thread will still restore the current inferior, and that's what we want. Random note: the thread_info object for inferior 2's thread is never freed. It is held (by refcount) by the restore_thread object in fetch_inferior_event, while the inferior's thread list gets cleared, in the exit event processing. When the refcount reaches 0 (when the restore_thread object is destroyed), there's nothing that actually deletes the thread_info object. And I think that nothing in GDB points to it anymore, so it leaks. I don't want to fix that in this patch, but thought it would be good to mention it, in case somebody has an idea for how to fix that. Change-Id: Ibc7df543e2c46aad5f3b9250b28c3fb5912be4e8 2022-04-29 Pedro Alves Slightly tweak and clarify target_resume's interface The current target_resume interface is a bit odd & non-intuitive. I've found myself explaining it a couple times the recent past, while reviewing patches that assumed STEP/SIGNAL always applied to the passed in PTID. It goes like this today: - if the passed in PTID is a thread, then the step/signal request is for that thread. - otherwise, if PTID is a wildcard (all threads or all threads of process), the step/signal request is for inferior_ptid, and PTID indicates which set of threads run free. Because GDB always switches the current thread to "leader" thread being resumed/stepped/signalled, we can simplify this a bit to: - step/signal are always for inferior_ptid. - PTID indicates the set of threads that run free. Still not ideal, but it's a minimal change and at least there are no special cases this way. That's what this patch does. It renames the PTID parameter to SCOPE_PTID, adds some assertions to target_resume, and tweaks target_resume's description. In addition, it also renames PTID to SCOPE_PTID in the remote and linux-nat targets, and simplifies their implementation a little bit. Other targets could do the same, but they don't have to. Change-Id: I02a2ec2ab3a3e9b191de1e9a84f55c17cab7daaf 2022-04-29 GDB Administrator Automatic date update in version.in 2022-04-28 Tom Tromey Fix libinproctrace.so build on PPC The recent gnulib import caused a build failure of libinproctrace.so on PPC: alloc.c:(.text+0x20): undefined reference to `rpl_malloc' alloc.c:(.text+0x70): undefined reference to `rpl_realloc' This patch fixes the problem using the same workaround that was previously used for free. 2022-04-28 H.J. Lu x86: Properly handle function pointer reference Update commit ebb191adac4ab45498dec0bfaac62f0a33537ba4 Author: H.J. Lu Date: Wed Feb 9 15:51:22 2022 -0800 x86: Disallow invalid relocation against protected symbol to allow function pointer reference and make sure that PLT entry isn't used for function reference due to function pointer reference. bfd/ PR ld/29087 * elf32-i386.c (elf_i386_scan_relocs): Don't set pointer_equality_needed nor check non-canonical reference for function pointer reference. * elf64-x86-64.c (elf_x86_64_scan_relocs): Likewise. ld/ PR ld/29087 * testsuite/ld-x86-64/x86-64.exp: Run PR ld/29087 tests. * testsuite/ld-x86-64/protected-func-3.c: New file. 2022-04-28 Tom Tromey Check OBJF_NOT_FILENAME in DWARF index code The DWARF index code currently uses 'stat' to see if an objfile represents a real file. However, I think it's more correct to check OBJF_NOT_FILENAME instead. Regression tested on x86-64 Fedora 34. 2022-04-28 Tom Tromey Remove "typedef enum ..." I noticed a few spots in GDB that use "typedef enum". However, in C++ this isn't as useful, as the tag is automatically entered as a typedef. This patch removes most uses of "typedef enum" -- the exceptions being in some nat-* code I can't compile, and glibc_thread_db.h, which I think is more or less a copy of some C code from elsewhere. Tested by rebuilding. 2022-04-28 Andrew Burgess gdb: fix nullptr dereference in block::ranges() This commit: commit f5cb8afdd297dd68273d98a10fbfd350dff918d8 Date: Sun Feb 6 22:27:53 2022 -0500 gdb: remove BLOCK_RANGES macro introduces a potential nullptr dereference in block::ranges, this is breaking most tests, e.g. gdb.base/break.exp is failing for me. In the above patch BLOCK_CONTIGUOUS_P is changed from this: #define BLOCK_CONTIGUOUS_P(bl) (BLOCK_RANGES (bl) == nullptr \ || BLOCK_NRANGES (bl) <= 1) to this: #define BLOCK_CONTIGUOUS_P(bl) ((bl)->ranges ().size () == 0 \ || (bl)->ranges ().size () == 1) So, before the commit we checked for the block ranges being nullptr, but afterwards we just call block::ranges() in all cases. The problem is that block::ranges() looks like this: /* Return a view on this block's ranges. */ gdb::array_view ranges () { return gdb::make_array_view (m_ranges->range, m_ranges->nranges); } where m_ranges is: struct blockranges *m_ranges; And so, we see that the nullptr check has been lost, and we might end up dereferencing a nullptr. My proposed fix is to move the nullptr check into block::ranges, and return an explicit empty array_view if m_ranges is nullptr. After this, everything seems fine again. 2022-04-28 Stefan Liebler s390: Add DT_JMPREL pointing to .rela.[i]plt with static-pie In static-pie case, there are IRELATIVE-relocs in .rela.iplt (htab->irelplt), which will later be grouped to .rela.plt. On s390, the IRELATIVE relocations are always located in .rela.iplt - even for non-static case. Ensure that DT_JMPREL, DT_PLTRELA, DT_PLTRELASZ is added to the dynamic section even if htab->srelplt->size == 0. See _bfd_elf_add_dynamic_tags in bfd/elflink.c. bfd/ elf64-s390.c (elf_s390_size_dynamic_sections): Enforce DT_JMPREL via htab->elf.dt_jmprel_required. 2022-04-28 Stefan Liebler s390: Avoid dynamic TLS relocs in PIE No dynamic relocs are needed for TLS defined in an executable, the TP relative offset is known at link time. Fixes FAIL: Build pr22263-1 bfd/ PR ld/22263 * elf64-s390.c (elf_s390_tls_transition): Use bfd_link_dll instead of bfd_link_pic for TLS. (elf_s390_check_relocs): Likewise. (allocate_dynrelocs): Likewise. (elf_s390_relocate_section): Likewise. 2022-04-28 Nick Alcock libctf: impose an ordering on conflicting types When two types conflict and they are not types which can have forwards (say, two arrays of different sizes with the same name in two different TUs) the CTF deduplicator uses a popularity contest to decide what to do: the type cited by the most other types ends up put into the shared dict, while the others are relegated to per-CU child dicts. This works well as long as one type *is* most popular -- but what if there is a tie? If several types have the same popularity count, we end up picking the first we run across and promoting it, and unfortunately since we are working over a dynhash in essentially arbitrary order, this means we promote a random one. So multiple runs of ld with the same inputs can produce different outputs! All the outputs are valid, but this is still undesirable. Adjust things to use the same strategy used to sort types on the output: when there is a tie, always put the type that appears in a CU that appeared earlier on the link line (and if there is somehow still a tie, which should be impossible, pick the type with the lowest type ID). Add a testcase -- and since this emerged when trying out extern arrays, check that those work as well (this requires a newer GCC, but since all GCCs that can emit CTF at all are unreleased this is probably OK as well). Fix up one testcase that has slight type ordering changes as a result of this change. libctf/ChangeLog: * ctf-dedup.c (ctf_dedup_detect_name_ambiguity): Use cd_output_first_gid to break ties. ld/ChangeLog: * testsuite/ld-ctf/array-conflicted-ordering.d: New test, using... * testsuite/ld-ctf/array-char-conflicting-1.c: ... this... * testsuite/ld-ctf/array-char-conflicting-2.c: ... and this. * testsuite/ld-ctf/array-extern.d: New test, using... * testsuite/ld-ctf/array-extern.c: ... this. * testsuite/ld-ctf/conflicting-typedefs.d: Adjust for ordering changes. 2022-04-28 Nick Alcock libctf: add a comment explaining how to use ctf_*open Specifically, tell users what to pass to those functions that accept raw section content, since it's fairly involved and easy to get wrong. (.dynsym / .dynstr when CTF_F_DYNSTR is set, otherwise .symtab / .strtab). include/ChangeLog: * ctf-api.h (ctf_*open): Improve comment. 2022-04-28 Vladimir Mezentsev gprofng: test suite problems gprofng/ChangeLog 2022-04-27 Vladimir Mezentsev PR gprofng/29065 * testsuite/lib/Makefile.skel: Search parent dir for libs too. 2022-04-28 Simon Marchi gdb: remove BLOCKVECTOR_MAP macro Replace with equivalent methods. Change-Id: I4e56c76dfc363c1447686fb29c4212ea18b4dba0 2022-04-28 Simon Marchi gdb: constify addrmap_find addrmap_find shouldn't need to modify the addrmap, so constify the addrmap parameter. This helps for the following patch, where getting the map of a const blockvector will return a const addrmap. Change-Id: If670e425ed013724a3a77aab7961db50366dccb2 2022-04-28 Simon Marchi gdb: remove BLOCKVECTOR_BLOCK and BLOCKVECTOR_NBLOCKS macros Replace with calls to blockvector::blocks, and the appropriate method call on the returned array_view. Change-Id: I04d1f39603e4d4c21c96822421431d9a029d8ddd 2022-04-28 Simon Marchi gdb: remove BLOCK_ENTRY_PC macro Replace with equivalent method. Change-Id: I0e033095e7358799930775e61028b48246971a7d 2022-04-28 Simon Marchi gdb: remove BLOCK_CONTIGUOUS_P macro Replace with an equivalent method. Change-Id: I60fd3be7b4c2601c2a74328f635fa48ed80eb7f5 2022-04-28 Simon Marchi gdb: remove BLOCK_RANGE macro Replace with access through the block::ranges method. Change-Id: I50f3ed433b997c9f354e49bc6583f540ae4b6121 2022-04-28 Simon Marchi gdb: remove BLOCK_NRANGES macro Replace with range for loops. Change-Id: Icbe04f9b6f9e6ddae2e15b2409c61f7a336bc3e3 2022-04-28 Simon Marchi gdb: remove BLOCK_RANGES macro Replace with an equivalent method on struct block. Change-Id: I6dcf13e9464ba8a08ade85c89e7329c300fd6c2a 2022-04-28 Simon Marchi gdb: remove BLOCK_RANGE_{START,END} macros Replace with equivalent methods on blockrange. Change-Id: I20fd8f624e0129782c36768291891e7582d77c74 2022-04-28 Simon Marchi gdb: remove BLOCK_NAMESPACE macro Replace with equivalent methods. Change-Id: If86b8cbdfb0f52e22c929614cd53e73358bab76a 2022-04-28 Simon Marchi gdb: remove BLOCK_MULTIDICT macro Replace with equivalent methods. Change-Id: If9a239c511a664f2a59fecb6d1cd579881b23dc2 2022-04-28 Simon Marchi gdb: remove BLOCK_SUPERBLOCK macro Replace with equivalent methods. Change-Id: I334a319909a50b5cc5570a45c38c70e10dc00630 2022-04-28 Simon Marchi gdb: remove BLOCK_FUNCTION macro Replace with equivalent methods. Change-Id: I31ec00f5bf85335c8b23d306ca0fe0b84d489101 2022-04-28 Simon Marchi gdb: remove BLOCK_{START,END} macros Replace with equivalent methods. Change-Id: I10a6c8a2a86462d9d4a6a6409a3f07a6bea66310 2022-04-28 GDB Administrator Automatic date update in version.in 2022-04-27 H.J. Lu x86: Disable 2 tests with large memory requirement gas/ * testsuite/gas/i386/i386.exp: Disable rept. ld/ * testsuite/ld-x86-64/x86-64.exp: Disable pr17618. 2022-04-27 Pedro Alves Make gdb.base/parse_number.exp test all architectures There are some subtle differences between architectures, like the size of a "long" type, and this isn't currently accounted for in gdb.base/parse_number.exp. For example, on aarch64 a long type is 8 bytes, whereas a long type is 4 bytes for x86_64. This causes the following FAIL's: FAIL: gdb.base/parse_number.exp: lang=asm: ptype 0xffffffffffffffff FAIL: gdb.base/parse_number.exp: lang=auto: ptype 0xffffffffffffffff FAIL: gdb.base/parse_number.exp: lang=c: ptype 0xffffffffffffffff FAIL: gdb.base/parse_number.exp: lang=c++: ptype 0xffffffffffffffff FAIL: gdb.base/parse_number.exp: lang=fortran: p/x 0xffffffffffffffff FAIL: gdb.base/parse_number.exp: lang=fortran: ptype 0xffffffffffffffff FAIL: gdb.base/parse_number.exp: lang=go: ptype 0xffffffffffffffff FAIL: gdb.base/parse_number.exp: lang=local: ptype 0xffffffffffffffff FAIL: gdb.base/parse_number.exp: lang=minimal: ptype 0xffffffffffffffff FAIL: gdb.base/parse_number.exp: lang=objective-c: ptype 0xffffffffffffffff FAIL: gdb.base/parse_number.exp: lang=opencl: ptype 0xffffffffffffffff FAIL: gdb.base/parse_number.exp: lang=pascal: ptype 0xffffffffffffffff There are some fortran-specific divergences as well, where 32-bit architectures show "unsigned int" for both 32-bit and 64-bit integers and 64-bit architectures show "unsigned int" and "unsigned long" for 32-bit and 64-bit integers. There might be a bug that 32-bit fortran truncates 64-bit values to 32-bit, given "p/x 0xffffffffffffffff" returns "0xffffffff". Here's what we get for aarch64: (gdb) ptype 0xffffffff type = unsigned int (gdb) ptype 0xffffffffffffffff type = unsigned long (gdb) p sizeof (0xffffffff) $1 = 4 (gdb) p sizeof (0xffffffffffffffff) quit $2 = 8 (gdb) ptype 0xffffffff type = unsigned int (gdb) ptype 0xffffffffffffffff type = unsigned long And for arm: (gdb) ptype 0xffffffff type = unsigned int (gdb) ptype 0xffffffffffffffff quit type = unsigned long long (gdb) p sizeof (0xffffffff) quit $1 = 4 (gdb) p sizeof (0xffffffffffffffff) quit $2 = 8 (gdb) ptype 0xffffffff type = unsigned int (gdb) ptype 0xffffffffffffffff type = unsigned long This patch... * Makes the testcase iterate over all architectures, thus covering all the different combinations of types/sizes every time. * Adjusts the expected values and types based on the sizes of long long, long and int. A particularly curious architecture is s12z, which has 32-bit long long, and thus no way to represent 64-bit integers in C-like languages. Co-Authored-By: Luis Machado Change-Id: Ifc0ccd33e7fd3c7585112ff6bebe7d266136768b 2022-04-27 Tom Tromey Fix gdbserver build for x86-64 Windows I broke the gdbserver build on x86-64 Windows a little while back. Previously, I could not build this configuration, but today I found out that if I configure with: --host=x86_64-w64-mingw32 --target=x86_64-w64-mingw32 using the Fedora 34 tools, it will in fact build. I'm not certain, but maybe the gnulib update helped with this. This patch fixes the build. I'm checking it in. 2022-04-27 John Baldwin Create pseudo sections for NT_ARM_TLS notes on FreeBSD. bfd/ChangeLog: * elf.c (elfcore_grok_freebsd_note): Handle NT_ARM_TLS notes. 2022-04-27 Christophe Lyon gdb/arm: Extend arm_m_addr_is_magic to support FNC_RETURN, add unwind-secure-frames command This patch makes use of the support for several stack pointers introduced by the previous patch to switch between them as needed during unwinding. It introduces a new 'unwind-secure-frames' arm command to enable/disable mode switching during unwinding. It is enabled by default. It has been tested using an STM32L5 board (with cortex-m33) and the sample applications shipped with the STM32Cube development environment: GTZC_TZSC_MPCBB_TrustZone in STM32CubeL5/Projects/NUCLEO-L552ZE-Q/Examples/GTZC. The test consisted in setting breakpoints in various places and check that the backtrace is correct: SecureFault_Callback (Non-secure mode), __gnu_cmse_nonsecure_call (before and after the vpush instruction), SecureFault_Handler (Secure mode). This implies that we tested only some parts of this patch (only MSP* were used), but remaining parts seem reasonable. 2022-04-27 Christophe Lyon gdb/arm: Add support for multiple stack pointers on Cortex-M Armv8-M architecture with Security extension features four stack pointers to handle Secure and Non-secure modes. This patch adds support to switch between them as needed during unwinding, and replaces all updates of cache->prev_sp with calls to arm_cache_set_prev_sp. 2022-04-27 Christophe Lyon gdb/arm: Introduce arm_cache_init This patch is a preparation for the rest of the series and adds two arm_cache_init helper functions. It updates every place that updates cache->saved_regs to call the helper instead. gdb/arm: Define MSP and PSP registers for M-Profile This patch removes the hardcoded access to PSP in arm_m_exception_cache() and relies on the definition with the XML descriptions. 2022-04-27 Christophe Lyon gdb/arm: Fix prologue analysis to support vpush While working on adding support for Non-secure/Secure modes unwinding, I noticed that the prologue analysis lacked support for vpush, which is used for instance in the CMSE stub routine. This patch updates thumb_analyze_prologue accordingly, adding support for vpush of D-registers. 2022-04-27 Enze Li gdb/testsuite: fix FAIL in gdb.base/clear_non_user_bp.exp Tom and Simon feedback that there is a test failing in this commit: commit a5c69b1e49bae4d0dcb20f324cebb310c63495c6 Date: Sun Apr 17 15:09:46 2022 +0800 gdb: fix using clear command to delete non-user breakpoints(PR cli/7161) Then, I reproduced the same fail with Ubuntu 20.04 as Simon said, and I fixed the nit in this patch. The root of the problem is not correctly matching the presentation of internal breakpoints. In addition, as Pedro pointed out, the original testcase is not portable in some methods, so this patch fixes this issue and some other improvements. Tested on x86_64 ubuntu 20.04.4 and openSUSE Tumbleweed(VERSION_ID="20220425"). 2022-04-27 Jan Beulich x86: VFPCLASSSH is Evex.LLIG This also was mistakenly flagged as Evex.128. 2022-04-27 Nick Clifton Fix potential buffer overruns when creating DLLs. PR 29006 * pe-dll.c (make_head): Use asprintf to allocate and populate a buffer containing the temporary name. (make_tail, make_one, make_singleton_name_thunk): Likewise. (make_import_fixup_mark, make_import_fixup_entry): Likewise. (make_runtime_pseudo_reloc): Likewise. (pe_create_runtime_relocator_reference): Likewise. 2022-04-27 Alan Modra Revert pr29072 lto test changes Revert commit 65daf5bed6 testsuite changes in ld-plugin/. -z isn't supported for non-ELF targets, and isn't needed since we now prune the exec stack warning (commit 333cd559ba). PR 29072 2022-04-27 Simon Marchi gdb/testsuite: use with_cwd where possible I learned about with_cwd today. I spotted a few spots that could use it, to make the code more robust. Change-Id: Ia23664cb827f25e79d31948e0c006a8dc61c33e1 2022-04-27 GDB Administrator Automatic date update in version.in 2022-04-26 Carl Love GDB PowerPC record test cases for ISA 2.06 and ISA 3.1 This patch adds PowerPC specific tests to verify recording of various instructions. The first test case checks the ISA 2.06 lxvd2x instruction. The second test case tests several of the ISA 3.01 instructions. Specifically, it checks the word and prefixed instructions and some of the Matrix Multiply Assist (MMA) instructions. The patch has been run on both Power 10 and Power 9 to verify the ISA 2.06 test case runs on both platforms without errors. The ISA 3.1 test runs without errors on Power 10 and is skipped as expected on Power 9. 2022-04-26 Carl Love Add recording support for the ISA 3.1 PowerPC instructions. This patch adds support for the PowerPC ISA 3.1 instructions to the PowerPC gdb instruction recording routines. Case statement entries are added to a number of the existing routines for recording the 32-bit word instructions. A few new functions were added to handle the new word instructions. The 64-bit prefix instructions are all handled by a set of new routines. The function ppc_process_prefix_instruction() is the primary function to handle the prefixed instructions. It calls additional functions to handle specific sets of prefixed instructions. These new functions are: ppc_process_record_prefix_vsx_d_form(), ppc_process_record_prefix_store_vsx_ds_form(), ppc_process_record_prefix_op34(), ppc_process_record_prefix_op33(), ppc_process_record_prefix_op32(), ppc_process_record_prefix_store(), ppc_process_record_prefix_op59_XX3(), ppc_process_record_prefix_op42(). 2022-04-26 Tom Tromey Handle encoding failures in Windows thread names Internally at AdaCore, we noticed that the new Windows thread name code could fail. First, it might return a zero-length string, but in gdb conventions it should return nullptr instead. Second, an encoding failure could wind up showing replacement characters to the user; this is confusing and not useful; it's better to recognize such errors and simply discard the name. This patch makes both of these changes. 2022-04-26 H.J. Lu i386: Pass -z noexecstack to linker tests PR ld/29072 * testsuite/ld-i386/i386.exp: Pass -z noexecstack to gotpc1 and property-6. 2022-04-26 John Baldwin bsd-kvm: Fix build after recent changes to path handling functions. Convert bsd_kvm_corefile and the local filename in bsd_kvm_open to std::string rather than simple char * pointers freed by xfree. 2022-04-26 Simon Marchi gdb: make some random Python files Python 3-compatible I noticed that these files failed to format with Black, because they use print without parenthesis (which isn't Python 3 compatible). I don't know if these files are still relevant, but the change is trivial, so here it is. Change-Id: I116445c2b463486016f824d32effffc915b60766 2022-04-26 Carl Love PowerPC: Update expected floating point output for gdb.arch/altivec-regs.exp and gdb.arch/vsx-regs.exp The format for printing the floating point values was changed by commit: commit 56262a931b7ca8ee3ec9104bc7e9e0b40cf3d64e Author: Tom Tromey Date: Thu Feb 17 13:43:59 2022 -0700 Change how "print/x" displays floating-point value Currently, "print/x" will display a floating-point value by first casting it to an integer type. This yields weird results like: (gdb) print/x 1.5 $1 = 0x1 ... Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=16242 The above change results in 417 regression test failures since the expected Power vector register output no longer match. This patch updates the expected Altivec floating point register prints to the hexadecimal format for both big endian and little endian systems. The patch also fixes a formatting isue with the decimal_vector expected value assign statements. The expected VSX vector_register1, vector_register1_vr, vector_register2, vector_register2_vr variables are updated to include the new float128 entry. Additionally, the comment in the vsx expect file about the initialization of the vs registers is updated. The patch has been tested on Power 10, Power 8 LE and Power 8 BE. 2022-04-26 John Baldwin gdbsupport/pathstuff.h: #include explicitly for std::array<> This fixes build breakage using clang with libc++ on FreeBSD where std::array<> is not yet declared when used by the path_join variadic function template. 2022-04-26 GDB Administrator Automatic date update in version.in 2022-04-25 Tom Tromey Do not put linkage names into .gdb_index This changes the .gdb_index writer to skip linkage names. This was always done historically (though somewhat implicitly). 2022-04-25 Nick Clifton Emit a note warning the user that creating an executable stack because of a missing .note.GNU-stack section is deprecated. PR 29072 bfd * elflink.c (bfd_elf_size_dynamic_sections): Display a note to the user that the current ehaviour of creating an executable stack because of a missing .note.GNU-stack section is deprecated and will be changed in a future release. binutils* testsuite/lib/binutils-common.exp (prune_warnings_extra): Filter out notes about the executable stacjk behaviour beign deprecated. ld * testsuite/ld-elf/pr29072.b.warn: Update to include the note about the linker's behaviour being depreccated. 2022-04-25 rupothar gdb/fortran: Support for assumed rank zero If a variable is passed to function in FORTRAN as an argument the variable is treated as an array with rank zero. GDB currently does not support the case for assumed rank 0. This patch provides support for assumed rank 0 and updates the testcase as well. Without patch: Breakpoint 1, arank::sub1 (a=) at assumedrank.f90:11 11 PRINT *, RANK(a) (gdb) p a failed to resolve dynamic array rank (gdb) p rank(a) failed to resolve dynamic array rank With patch: Breakpoint 1, arank::sub1 (a=0) at assumedrank.f90:11 11 PRINT *, RANK(a) (gdb) p a $1 = 0 (gdb) p rank(a) $2 = 0 2022-04-25 Lancelot SIX gdb/infrun: assert !step_over_info_valid_p in restart_threads While working in gdb/infrun.c:restart_threads, I was wondering what are the preconditions to call the function. It seems to me that !step_over_info_valid_p should be a precondition (i.e. if we are doing an inline step over breakpoint, we do not want to resume non stepping threads as one of them might miss the breakpoint which is temporally disabled). To convince myself that this is true, I have added an assertion to enforce this, and got one regression in the testsuite: FAIL: gdb.base/step-over-syscall.exp: vfork: displaced=off: single step over vfork (GDB internal error) This call to restart_threads originates from handle_vfork_done which does not check if a step over is active when restarting other threads: if (target_is_non_stop_p ()) { scoped_restore_current_thread restore_thread; insert_breakpoints (); restart_threads (event_thread, event_thread->inf); start_step_over (); } In this patch, I propose to: - Call start_step_over before restart_threads. If a step over is already in progress (as it is the case in the failing testcase), start_step_over return immediately, and there is no point in restarting all threads just to stop them right away for a step over breakpoint. - Only call restart_threads if no step over is in progress at this point. In this patch, I also propose to keep the assertion in restart_threads to help enforce this precondition, and state it explicitly. I have also checked all other places which call restart_threads, and they all seem to check that there is no step over currently active before doing the call. As for infrun-related things, I am never completely sure I did not miss something. So as usual, all feedback and thoughts are very welcome. Tested on x86_64-linux-gnu. Change-Id: If5f5f98ec4cf9aaeaabb5e3aa88ae6ffd70d4f37 2022-04-25 GDB Administrator Automatic date update in version.in 2022-04-24 Andrew Burgess gdb: move setbuf calls out of gdb_readline_no_editing_callback After this commit: commit d08cbc5d3203118da5583296e49273cf82378042 Date: Wed Dec 22 12:57:44 2021 +0000 gdb: unbuffer all input streams when not using readline Issues were reported with some MS-Windows hosts, see the thread starting here: https://sourceware.org/pipermail/gdb-patches/2022-March/187004.html Filed in bugzilla as: PR mi/29002 The problem seems to be that calling setbuf on terminal file handles is not always acceptable, see this mail for more details: https://sourceware.org/pipermail/gdb-patches/2022-April/187310.html This commit does two things, first moving the setbuf calls out of gdb_readline_no_editing_callback so that we don't end up calling setbuf so often. Then, for MS-Windows hosts, we don't call setbuf for terminals, this appears to resolve the issues that have been reported. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29002 2022-04-24 GDB Administrator Automatic date update in version.in 2022-04-23 GDB Administrator Automatic date update in version.in 2022-04-22 Simon Marchi gdb: handle_no_resumed: only update thread list of event target When running: $ make check TESTS="gdb.multi/multi-re-run.exp" RUNTESTFLAGS="--target_board=native-gdbserver" I get: target remote localhost:2347^M Remote debugging using localhost:2347^M Reading symbols from /lib64/ld-linux-x86-64.so.2...^M Reading symbols from /usr/lib/debug//lib/x86_64-linux-gnu/ld-2.31.so...^M 0x00007ffff7fd0100 in _start () from /lib64/ld-linux-x86-64.so.2^M (gdb) continue^M Continuing.^M Cannot execute this command while the target is running.^M Use the "interrupt" command to stop the target^M and then try again.^M (gdb) FAIL: gdb.multi/multi-re-run.exp: re_run_inf=1: iter=1: runto: run to all_started The test does: - Connect to a remote target with inferior 2, continue and stop on the all_started function - Connect to a separate remote target / GDBserver instance with inferior 1, continue and (expect to) stop on the all_started function The failure seen above happens when trying to continue inferior 1. What happens is: - GDB tells inferior 1's remote target to continue - We go into fetch_inferior_event, try to get an event at random from the targets - do_target_wait happens to pick inferior 2's target - That target return TARGET_WAITKIND_NO_RESUMED, which makes sense: inferior 2 is stopped, that target has no resumed thread - handle_no_resumed tries to update the thread list of all targets: for (auto *target : all_non_exited_process_targets ()) { switch_to_target_no_thread (target); update_thread_list (); } - When trying to update the thread list of inferior 1's target, it hits the "Cannot execute this command while the target is running" error. This target is working in "remote all-stop" mode, and it is currently waiting for a stop reply, so it can't send packets to update the thread list at this time. To handle the problem described in the comment in handle_no_resumed, I don't think it is necessary to update the thread list of all targets, but only the event target. That comment describes a kind of race condition where some target reports a breakpoint hit for a thread and then its last remaining resumed thread exits, so sends a "no resumed" event. If we ended up resuming the thread that hit a breakpoint, we want to ignore the "no resumed" and carry on. But I don't really see why we need to update the thread list on the other targets. I can't really articulate this, it's more a gut feeling, maybe I just fail to imagine the situation where this is needed. But here is the patch anyway, so we can discuss it. The patch changes handle_no_resumed to only update the thread list of the event target. This fixes the test run shown above. The way I originally tried to fix this was to make remote_target::update_thread_list return early if the target is currently awaiting a stop reply, since there's no way it can update the thread list at that time. But that felt more like papering over the problem. I then thought that we probably shouldn't be asking the target to update the thread list unnecessarily. Change-Id: Ide3df22b4f556478e155ad1c67ad4b4fe7c26a58 2022-04-22 Simon Marchi gdbserver/linux: free process_info_private and arch_process_info when failing to attach Running $ ../gdbserver/gdbserver --once --attach :1234 539436 with ASan while /proc/sys/kernel/yama/ptrace_scope is set to 1 (prevents attaching) shows that we fail to free some platform-specific objects tied to the process_info (process_info_private and arch_process_info): Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7f6b558b3fb9 in __interceptor_calloc /usr/src/debug/gcc/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x562eaf15d04a in xcalloc /home/simark/src/binutils-gdb/gdbserver/../gdb/alloc.c:100 #2 0x562eaf251548 in xcnew /home/simark/src/binutils-gdb/gdbserver/../gdbsupport/poison.h:122 #3 0x562eaf22810c in linux_process_target::add_linux_process_no_mem_file(int, int) /home/simark/src/binutils-gdb/gdbserver/linux-low.cc:426 #4 0x562eaf22d33f in linux_process_target::attach(unsigned long) /home/simark/src/binutils-gdb/gdbserver/linux-low.cc:1132 #5 0x562eaf1a7222 in attach_inferior /home/simark/src/binutils-gdb/gdbserver/server.cc:308 #6 0x562eaf1c1016 in captured_main /home/simark/src/binutils-gdb/gdbserver/server.cc:3949 #7 0x562eaf1c1d60 in main /home/simark/src/binutils-gdb/gdbserver/server.cc:4084 #8 0x7f6b552f630f in __libc_start_call_main (/usr/lib/libc.so.6+0x2d30f) Indirect leak of 56 byte(s) in 1 object(s) allocated from: #0 0x7f6b558b3fb9 in __interceptor_calloc /usr/src/debug/gcc/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x562eaf15d04a in xcalloc /home/simark/src/binutils-gdb/gdbserver/../gdb/alloc.c:100 #2 0x562eaf2a0d79 in xcnew /home/simark/src/binutils-gdb/gdbserver/../gdbsupport/poison.h:122 #3 0x562eaf295e2c in x86_target::low_new_process() /home/simark/src/binutils-gdb/gdbserver/linux-x86-low.cc:723 #4 0x562eaf22819b in linux_process_target::add_linux_process_no_mem_file(int, int) /home/simark/src/binutils-gdb/gdbserver/linux-low.cc:428 #5 0x562eaf22d33f in linux_process_target::attach(unsigned long) /home/simark/src/binutils-gdb/gdbserver/linux-low.cc:1132 #6 0x562eaf1a7222 in attach_inferior /home/simark/src/binutils-gdb/gdbserver/server.cc:308 #7 0x562eaf1c1016 in captured_main /home/simark/src/binutils-gdb/gdbserver/server.cc:3949 #8 0x562eaf1c1d60 in main /home/simark/src/binutils-gdb/gdbserver/server.cc:4084 #9 0x7f6b552f630f in __libc_start_call_main (/usr/lib/libc.so.6+0x2d30f) Those objects are deleted by linux_process_target::mourn, but that is not called if we fail to attach, we only call remove_process. I initially fixed this by making linux_process_target::attach call linux_process_target::mourn on failure (before calling error). But this isn't done anywhere else (including in GDB) so it would just be confusing to do things differently here. Instead, add a linux_process_target::remove_linux_process helper method (which calls remove_process), and call that instead of remove_process in the Linux target. Move the free-ing of the extra data from the mourn method to that new method. Change-Id: I277059a69d5f08087a7f3ef0b8f1792a1fcf7a85 2022-04-22 Andrew Burgess gdb: handle bracketed-paste-mode and EOF correctly This commit replaces an earlier commit that worked around the issues reported in bug PR gdb/28833. The previous commit just implemented a work around in order to avoid the worst results of the bug, but was not a complete solution. The full solution was considered too risky to merge close to branching GDB 12. This improved fix has been applied after GDB 12 branched. See this thread for more details: https://sourceware.org/pipermail/gdb-patches/2022-March/186391.html This commit replaces this earlier commit: commit 74a159a420d4b466cc81061c16d444568e36740c Date: Fri Mar 11 14:44:03 2022 +0000 gdb: work around prompt corruption caused by bracketed-paste-mode Please read that commit for a full description of the bug, and why is occurs. In this commit I extend GDB to use readline's rl_deprep_term_function hook to call a new function gdb_rl_deprep_term_function. From this new function we can now print the 'quit' message, this replaces the old printing of 'quit' in command_line_handler. Of course, we only print 'quit' in gdb_rl_deprep_term_function when we are handling EOF, but thanks to the previous commit (to readline) we now know when this is. There are two aspects of this commit that are worth further discussion, the first is in the new gdb_rl_deprep_term_function function. In here I have used a scoped_restore_tmpl to disable the readline global variable rl_eof_found. The reason for this is that, in rl_deprep_terminal, readline will print an extra '\n' character before printing the escape sequence to leave bracketed paste mode. You might then think that in the gdb_rl_deprep_term_function function, we could simply print "quit" and rely on rl_deprep_terminal to print the trailing '\n'. However, rl_deprep_terminal only prints the '\n' when bracketed paste mode is on. If the user has turned this feature off, no '\n' is printed. This means that in gdb_rl_deprep_term_function we need to print "quit" when bracketed paste mode is on, and "quit\n" when bracketed paste mode is off. We could absolutely do that, no problem, but given we know how rl_deprep_terminal is implemented, it's easier (I think) to just temporarily clear rl_eof_found, this prevents the '\n' being printed from rl_deprep_terminal, and so in gdb_rl_deprep_term_function, we can now always print "quit\n" and this works for all cases. The second issue that should be discussed is backwards compatibility with older versions of readline. GDB can be built against the system readline, which might be older than the version contained within GDB's tree. If this is the case then the system readline might not contain the fixes needed to support correctly printing the 'quit' string. To handle this situation I have retained the existing code in command_line_handler for printing 'quit', however, this code is only used now if the version of readline we are using doesn't not include the required fixes. And so, if a user is using an older version of readline, and they have bracketed paste mode on, then they will see the 'quit' sting printed on the line below the prompt, like this: (gdb) quit I think this is the best we can do when someone builds GDB against an older version of readline. Using a newer version of readline, or the patched version of readline that is in-tree, will now give a result like this in all cases: (gdb) quit Which is what we want. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28833 2022-04-22 Andrew Burgess readline: back-port changes needed to properly detect EOF This commit is a partial back-port of this upstream readline commit: commit 002d31aa5f5929eb32d0e0e2e8b8d35d99e59961 Author: Chet Ramey Date: Thu Mar 3 11:11:47 2022 -0500 add rl_eof_found to public API; fix pointer aliasing problems \ with history-search-backward; fix a display problem with \ runs of invisible characters at the end of a physical \ screen line I have only pulled in the parts of this commit that relate to the new rl_eof_found global, and the RL_STATE_EOF state flag. These changes are needed in order to fix PR cli/28833, and are discussed in this thread to the bug-readline mailing list: https://lists.gnu.org/archive/html/bug-readline/2022-02/msg00021.html The above commit is not yet in any official readline release, but my hope is that now it has been merged into the readline tree it should be safe enough to back port this fix to GDB's tree. At some point in the future we will inevitably want to roll forward the version of readline that we maintain in the binutils-gdb repository. When that day comes the changes in this commit can be replaced with the latest upstream readline code, as I have not changed the meaning of this code at all from what is in upstream readline. This commit alone does not fix the PR cli/28833 issue, for that see the next commit, which changes GDB itself. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28833 2022-04-22 Andrew Burgess gdb: improved EOF handling when using readline 7 In this commit: commit a6b413d24ccc5d76179bab866834e11fd6fec294 Date: Fri Mar 11 14:44:03 2022 +0000 gdb: work around prompt corruption caused by bracketed-paste-mode a change was made to GDB to work around bug PR gdb/28833. The consequence of this work around is that, when bracketed paste mode is enabled in readline, and GDB is quit by sending EOF, then the output will look like this: (gdb) quit The ideal output, which is what we get when bracketed paste mode is off, is this: (gdb) quit The reason we need to make this change is explained in the original commit referenced above. What isn't mentioned in the above commit, is that the change that motivated this work around was only added in readline 8, older versions of readline don't require the change. In later commits in this series I will add a fix to GDB's in-tree copy of readline (this fix is back-ported from upstream readline), and then I will change GDB so that, when using the (patched) in-tree readline, we can have the ideal output in all cases. However, GDB can be built against the system readline. When this is done, and the system readline is version 8, then we will still have to use the work around (two line) style output. But, if GDB is built against the system readline, and the system readline is an older version 7 readline, then there's no reason why we can't have the ideal output, after all, readline 7 doesn't include the change that we need to work around. This commit changes GDB so that, when using readline 7 we get the ideal output in all cases. This change is trivial (a simple check against the readline version number) so I think this should be fine to include. For testing this commit, you need to configure GDB including the '--with-system-readline' flag, and build GDB on a system that uses readline 7, for example 'Ubuntu 18.04'. Then run the test 'gdb.base/eof-exit.exp', you should expect everything to PASS. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28833 2022-04-22 Simon Marchi gdb: prune inferiors at end of fetch_inferior_event, fix intermittent failure of gdb.threads/fork-plus-threads.exp This test sometimes fail like this: info threads^M Id Target Id Frame ^M 11.12 process 2270719 Couldn't get registers: No such process.^M (gdb) FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left [Inferior 11 (process 2270719) exited normally]^M info inferiors^M Num Description Connection Executable ^M * 1 /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.threads/fork-plus-threads/fork-plus-threads ^M 11 /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.threads/fork-plus-threads/fork-plus-threads ^M (gdb) FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left (the program exited) I can get it to fail quite reliably by pinning it to a core: $ taskset -c 5 make check TESTS="gdb.threads/fork-plus-threads.exp" The previous attempt at fixing this was: https://sourceware.org/pipermail/gdb-patches/2021-October/182846.html What we see is part due to a possible unfortunate ordering of events given by the kernel, and what could be considered a bug in GDB. The test program makes a number of forks, waits them all, then exits. Most of the time, GDB will get and process the exit event for inferior 1 after the exit events of all the children. But this is not guaranteed. After the last child exits and is waited by the parent, the parent can exit quickly, such that GDB collects from the kernel the exit events for the parent and that child at the same time. It then chooses one event at random, which can be the event for the parent. This will result in the parent appearing to exit before its child. There's not much we can do about it, so I think we have to adjust the test to cope. After expect has seen the "exited normally" notification for inferior 1, it immediately does an "info thread" that it expects to come back empty. But at this point, GDB might not have processed inferior 11's (the last child) exit event, so it will look like there is still a thread. Of course that thread is dead, we just don't know it yet. But that makes the "no thread" test fail. If the test waited just a bit more for the "exited normally" notification for inferior 11, then the list of threads would be empty. So, first change, make the test collect all the "exited normally" notifications for all inferiors before proceeding, that should ensure we see an empty thread list. That would fix the first FAIL above. However, we would still have the second FAIL, as we expect inferior 11 to not be there, it should have been deleted automatically. Inferior 11 is normally deleted when prune_inferiors is called. That is called by normal_stop, which is only called by fetch_inferior_event only if the event thread completed an execution command FSM (thread_fsm). But the FSM for the continue command completed when inferior 1 exited. At that point inferior 11 was not prunable, as it still had a thread. When inferior 11 exits, prune_inferiors is not called. I think that can be considered a GDB bug. From the user point of view, there's no reason why in one case inferior 11 would be deleted and not in the other case. This patch makes the somewhat naive change to call prune_inferiors in fetch_inferior_event, so that it is called in this case. It is placed at this particular point in the function so that it is called after the user inferior / thread selection is restored. If it was called before that, inferior 11 wouldn't be pruned, because it would still be the current inferior. Change-Id: I48a15d118f30b1c72c528a9f805ed4974170484a Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26272 2022-04-22 Tom Tromey Un-break the coff-pe-read.c build This fixes a build breakage in my recent coff-pe-read.c change. I'm sorry about this. I don't understand how it happened, because I definitely built and tested the series on Windows, and I didn't change it before pushing. Something must have gone wrong on the Windows build, but I don't know what. I'll investigate and and re-test to be sure. 2022-04-22 Tom Tromey More const use and alloca avoidance in coff-pe-read.c This changes another function in coff-pe-read.c to use 'const' more, and to avoid the use of alloca by instead using std::string. Use std::string in coff-pe-read.c coff-pe-read.c uses xsnprintf and alloca, but using std::string is better, and just as easy. In general I think alloca is something to be avoided, and unbounded uses especially so. Remove a const-removing cast from coff-pe-read.c coff-pe-read.c casts away const at one spot, but this is easily replaced by calling bfd_get_filename directly in a couple of debugging prints. Simplify BFD section iteration in coff-pe-read.c coff-pe-read.c iterates over BFD sections using bfd_map_over_sections, but it's much simpler to use a for-each loop. This allows for the removal of helper functions and types. 2022-04-22 Tom Tromey Fix method naming bug in new DWARF indexer Pedro pointed out that gdb-add-index is much slower with the new DWARF indexer. He also noticed that, in some cases, the generated .gdb_index would have the wrong fully-qualified name for a method. I tracked this down to a bug in the indexer. If a type could have methods but was marked as a declaration, the indexer was ignoring it. However, this meant that the internal map to find the qualified name was not updated for this container. 2022-04-22 Christoph Muellner RISC-V: Add missing DECLARE_INSNs for Zicbo{m,p,z} The recently added support for the Zicbo{m,p,z} extensions did not include DECLARE_INSN() declarations for the instructions. These declarations are needed by GDB's instruction detection code. This patch adds them. 2022-04-22 GDB Administrator Automatic date update in version.in 2022-04-21 Carl Love Fix for gdb.base/solib-search.exp test. The variable right_lib_flags is not being set correctly to define RIGHT. The value RIGHT is needed to force the address of the library functions lib1_func3 and lib2_func4 to occur at different address in the wrong and right libraries. With RIGHT defined correctly, functions lib1_func3 and lib2_func4 occur at different addresses the test runs correctly on Powerpc. The test needs the lib2 addresses to be different in the right and wrong cases. That is the point of introducing function lib2_spacer with the ifdef RIGHT compiler directive. On Intel, the ARRAY_SIZE of 1 versus 8192 is sufficient to get the dynamic linker to move the addresses of the library. You can also get the same effect on PowerPC but you must use a value much larger than 8192. The key thing is that the test was not properly setting RIGHT to defined to get the lib2_spacer function on Intel and Powerpc. Without the patch, we have the Intel backtrace for the bad libraries: backtrace #0 break_here () at /home/ ... /gdb/testsuite/gdb.base/solib-search.c:30 #1 0x00007ffff7fae156 in ?? () #2 0x00007fffffffc150 in ?? () #3 0x00007ffff7fbb156 in ?? () #4 0x00007fffffffc160 in ?? () #5 0x00007ffff7fae146 in ?? () #6 0x00007fffffffc170 in ?? () #7 0x00007ffff7fbb146 in ?? () #8 0x00007fffffffc180 in ?? () #9 0x0000555555555156 in main () at /home/ ... /binutils-gdb/gdb/testsuite/gdb.base/solib-search.c:23 Backtrace stopped: previous frame inner to this frame (corrupt stack?) (gdb) PASS: gdb.base/solib-search.exp: backtrace (with wrong libs) (data collection) The backtrace on Intel with the good libraries is: backtrace #0 break_here () at /.../binutils-gdb/gdb/testsuite/gdb.base/solib-search.c:30 #1 0x00007ffff7fae156 in lib2_func4 () at /.../binutils-gdb/gdb/testsuite/gdb.base/solib-search-lib2.c:49 #2 0x00007ffff7fbb156 in lib1_func3 () at /.../gdb.base/solib-search-lib1.c:49 #3 0x00007ffff7fae146 in lib2_func2 () at /.../testsuite/gdb.base/solib-search-lib2.c:30 #4 0x00007ffff7fbb146 in lib1_func1 () at /.../gdb.base/solib-search-lib1.c:30 #5 0x0000555555555156 in main () at /...solib-search.c:23 (gdb) PASS: gdb.base/solib-search.exp: backtrace (with right libs) (data collection) PASS: gdb.base/solib-search.exp: backtrace (with right libs) In one case the backtrace is correct and the other it is wrong on Intel. This is due to the fact that the ARRAY_SIZE caused the dynamic linker to move the library function addresses around. I believe it has to do with the default size of the data and code sections used by the dynamic linker. So without the patch the backtrace on PowerPC looks like: backtrace #0 break_here () at /.../solib-search.c:30 #1 0x00007ffff7f007f4 in lib2_func4 () at /.../solib-search-lib2.c:49 #2 0x00007ffff7f307f4 in lib1_func3 () at /.../solib-search-lib1.c:49 #3 0x00007ffff7f007ac in lib2_func2 () at /.../solib-search-lib2.c:30 #4 0x00007ffff7f307ac in lib1_func1 () at /.../solib-search-lib1.c:30 #5 0x000000001000074c in main () at /.../solib-search.c:23 for both the good and bad libraries. The patch fixes defining RIGHT in solib-search-lib1.c and solib-search- lib2.c. Note, without the patch the lib1_spacer and lib2_spacer functions do not show up in the object dump of the Intel or Powerpc libraries as it should. The patch fixes that by making sure RIGHT gets defined. Now with the patch the backtrace for the bad library on PowerPC looks like: backtrace #0 break_here () at /.../solib-search.c:30 #1 0x00007ffff7f0083c in __glink_PLTresolve () from /.../solib-search-lib2.so Backtrace stopped: frame did not save the PC And the backtrace for the good libraries on PowerPC looks like: backtrace #0 break_here () at /.../solib-search.c:30 #1 0x00007ffff7f0083c in lib2_func4 () at /.../solib-search-lib2.c:49 #2 0x00007ffff7f3083c in lib1_func3 () at /.../solib-search-lib1.c:49 #3 0x00007ffff7f007cc in lib2_func2 () at /.../solib-search-lib2.c:30 #4 0x00007ffff7f307cc in lib1_func1 () at /.../solib-search-lib1.c:30 #5 0x000000001000074c in main () at /.../solib-search.c:23 (gdb) PASS: gdb.base/solib-search.exp: backtrace (with right libs) (data collection) PASS: gdb.base/solib-search.exp: backtrace (with right libs) The issue then is on Power where the ARRAY_SIZE of 1 versus 8192 is not sufficient to cause the dymanic linker to allocate the libraries at different addresses. I don't claim to understand the specifics of how the dynamic linker works and what the default size is for the data and code sections are. My guess is by default PowerPC allocates a larger data size by default, which is large enough to hold array[8192]. The default size of the data section allocated by the dynamic linker on Intel is not large enough to hold array[8192] thus causing the code section on Intel to have to move when the large array is defined. Note on PowerPC, if you make ARRAY_SIZE big enough, then you will cause the library addresses to occur at different addresses as the larger data section forces the code section to a different address. That was actually my original fix for the program until I spoke with Doug Evans who originally wrote the test. Doug noticed that RIGHT was not getting defined as he originally intended in the test. With the patch to fix the definition of RIGHT, PowerPC has a bad and a good backtrace because the address of lib1_func3 and lib2_func4 both move because lib1_spacer and lib2_spacer are now defined before lib1_func3 and lib2_func4. Without the patch, the lib1_spacer and lib2_spacer function doesn't show up in the binary for the correct or incorrect library on Intel or PowerPC. With the patch, RIGHT gets defined as originally intended for the test on both architectures and lib1_spacer and lib2_spacer function show up in the binaries on both architectures changing the other function addresses as intended thus causing the test work as intended on PowerPC. 2022-04-21 Simon Marchi gdb/dwarf: remove line_header::header_length field This can be a local in dwarf_decode_line_header. Change-Id: I2ecf4616d1a3197bd1e81ded9f999a2da9a685af 2022-04-21 Simon Marchi gdb/dwarf: remove line_header::total_length field This doesn' have to be a field, it can simply be a local variable in dwarf_decode_line_header. Name the local variable "unit_length", since that's what the field in called in DWARF 4 and 5. It's always easier to follow the code with the standard on the side when we use the same terminology. Change-Id: I3ad1022afd9410b193ea11b9b5437686c1e4e633 2022-04-21 Simon Marchi gdb/testsuite: fix "set temporary breakpoint" DUPLICATEs Commit c67f4e538 ("gdb/testsuite: make gdb.ada/mi_prot.exp stop at expected location") introduced some DUPLICATEs in MI tests using mi_continue_to_line, for example: DUPLICATE: gdb.ada/mi_ref_changeable.exp: mi_continue_to_line: set temporary breakpoint These test names were previously differentiated by the location passed to mi_continue_to_line. Since the location can contain a path, that commit removed the location from the test name, in favor of a hardcoded string "set temporary breakpoint", hence removing the differentiator. mi_continue_to_line receives a "test" parameter, containing a test name. Add a "with_test_prefix" with that name, so that all tests recorded during mi_continue_to_line have this in their name. mi_continue_to_line passes that "test" string to mi_get_stop_line, that is a bit superfluous. mi_get_stop_line only uses that string in case of failures (it doesn't record a pass if everything goes fine). Since it's not crucial, just remove it, and adjust all callers. Adjust three gdb.mi/mi-var-*.exp tests to use prefixes to differentiate the multiple calls to mi_run_inline_test (which calls mi_continue_to_line). Change-Id: I511c6caa70499f8657b1cde37d71068d74d56a74 2022-04-21 Tom Tromey Always use dwarf2_initialize_objfile Internally we noticed that some tests would fail like so on Windows: warning: Section .debug_aranges in [...] has duplicate debug_info_offset 0x0, ignoring .debug_aranges. Debugging showed that, in fact, a second CU was being created at this offset. We tracked this down to the fact that, while the ELF reader is careful to re-use the per-BFD data, other readers are not, and could re-read the DWARF data multiple times. However, since the change to allow an objfile to have multiple "quick symbol" implementations, there's no reason for this approach -- it's safe and easy for all symbol readers to reuse the per-BFD data when reading DWARF. This patch implements this idea, simplifying dwarf2_build_psymtabs and making it private, and then switching to dwarf2_initialize_objfile as the sole way to start the DWARF reader. Note that, while I think the call to dwarf2_build_frame_info in machoread.c is also obsolete, I haven't attempted to remove it here. 2022-04-21 Andrew Burgess gdb: fix 'remote show FOO-packet' aliases The following behaviour was observed in GDB: (gdb) show remote X-packet Support for the `p' packet is auto-detected, currently unknown. Note the message mentions the 'p' packet. This is a regression since this commit: commit 8579fd136a614985bd27f20539c7bb7c5a51287d Date: Mon Nov 8 14:58:46 2021 +0000 gdb/gdbsupport: make xstrprintf and xstrvprintf return a unique_ptr Before this commit the behaviour was: (gdb) show remote X-packet Support for the `X' packet is auto-detected, currently unknown. The problem was caused by a failed attempt to ensure that some allocated strings were deleted when GDB exits. The code in the above commit attempted to make use of 'static' to solve this problem, however, the solution was just wrong. In this new commit I instead allocate a static vector into which all the allocated strings are stored, this ensures the strings are released when GDB exits (which makes output from tools like valgrind cleaner), but each string within the vector can be unique, which fixes the regression. 2022-04-21 Simon Marchi gdbsupport: add path_join function In this review [1], Eli pointed out that we should be careful when concatenating file names to avoid duplicated slashes. On Windows, a double slash at the beginning of a file path has a special meaning. So naively concatenating "/" and "foo/bar" would give "//foo/bar", which would not give the desired results. We already have a few spots doing: if (first_path ends with a slash) path = first_path + second_path else path = first_path + slash + second_path In general, I think it's nice to avoid superfluous slashes in file paths, since they might end up visible to the user and look a bit unprofessional. Introduce the path_join function that can be used to join multiple path components together (along with unit tests). I initially wanted to make it possible to join two absolute paths, to support the use case of prepending a sysroot path to a target file path, or the prepending the debug-file-directory to a target file path. But the code in solib_find_1 shows that it is more complex than this anyway (for example, when the right hand side is a Windows path with a drive letter). So I don't think we need to support that case in path_join. That also keeps the implementation simpler. Change a few spots to use path_join to show how it can be used. I believe that all the spots I changed are guarded by some checks that ensure the right hand side operand is not an absolute path. Regression-tested on Ubuntu 18.04. Built-tested on Windows, and I also ran the new unit-test there. [1] https://sourceware.org/pipermail/gdb-patches/2022-April/187559.html Change-Id: I0df889f7e3f644e045f42ff429277b732eb6c752 2022-04-21 Lancelot SIX gdb_spawn_attach_cmdline: use unsupported instead of untested In a previous commit (b750766ac96: gdb/testsuite: Introduce and use gdb_spawn_attach_cmdline), if gdb_spawn_attach_cmdline cannot have GDB attach to the process because of ptrace restrictions (operation not permitted), the proc issues UNTESTED. This should really be UNSUPPORTED, as it is done in gdb_attach. This patch fixes this oversight. Change-Id: Ib87e33b9230f3fa7a85e06220ef4c63814b71f7d 2022-04-21 Enze Li gdb/testsuite: add binary testcases to py-format-string.exp We currently only test decimal and hexadecimal for the gdb.Value.format_string() interface, this patch adds testcases for binary format. Tested on x86_64 openSUSE Tumbleweed(VERSION_ID="20220413"). 2022-04-21 Pedro Alves gdb.debuginfod/fetch_src_and_symbols.exp: Fix "notice empty URL" test The gdb_test_multiple pattern for the "notice empty URL" test in gdb.debuginfod/fetch_src_and_symbols.exp misses expecting the prompt. Fix it by using -re -wrap. Also, by using "confirm off", the message GDB prints if Debuginfod downloading is available doesn't contain "Enable debuginfod" any longer. E.g.: ~~~ (gdb) file testsuite/outputs/gdb.debuginfod/fetch_src_and_symbols/fetch_src_and_symbols Reading symbols from testsuite/outputs/gdb.debuginfod/fetch_src_and_symbols/fetch_src_and_symbols... This GDB supports auto-downloading debuginfo from the following URLs: Enable debuginfod for this session? (y or [n]) ~~~ ~~~ (gdb) with confirm off -- file testsuite/outputs/gdb.debuginfod/fetch_src_and_symbols/fetch_src_and_symbols Reading symbols from testsuite/outputs/gdb.debuginfod/fetch_src_and_symbols/fetch_src_and_symbols... This GDB supports auto-downloading debuginfo from the following URLs: <127.0.0.1:8000> Debuginfod has been disabled. To make this setting permanent, add 'set debuginfod enabled off' to .gdbinit. (No debugging symbols found in testsuite/outputs/gdb.debuginfod/fetch_src_and_symbols/fetch_src_and_symbols) (gdb) ~~~ I handled that correctly in the other tests that use test_urls, but had forgotten to update the "notice empty URL" one. Change-Id: I00040c83466e1494b3875574eb009c571a1504bf 2022-04-21 Alan Modra prune .note.GNU-stack warning from testsuite binutils/ * testsuite/lib/binutils-common.exp (prune_warnings_extra): Remove .note.GNU-stack warning. (run_dump_test): Call prune_warnings for ld and objcopy output. ld/ * testsuite/ld-elf/elf.exp: Disable prune_warnings_extra temporarily around test for absent .note.GNU-stack * testsuite/ld-cris/globsymw2.s, * testsuite/ld-cris/warn3.d: Modify "is not implemented" message to avoid dejagnu prune_warnings. ld testsuite xcoff XPASS * testsuite/ld-scripts/defined5.d: Don't xfail xcoff targets. Delete unused COFF gas macro * config/obj-coff.h (sy_obj): Don't define. (OBJ_SYMFIELD_TYPE): Revise comments. 2022-04-21 GDB Administrator Automatic date update in version.in 2022-04-20 Aaron Merey gdb/debuginfod: Prevent out_of_range exception Trailing whitespace in the string of debuginfod URLs causes an out_of_range exception during the printing of URLs for the first use notice. To fix this, stop printing URLs when the substring to be printed consists only of whitespace. Also add first use notice testcases. Co-Authored-By: Pedro Alves 2022-04-20 Lancelot SIX gdb/testsuite: Introduce and use gdb_spawn_attach_cmdline Following a7e6a19e87f3d719ea23c65b580a6d9bca4ccab3 "gdb: testsuite: add new gdb_attach to check "attach" command", this commit proposes to introduce the gdb_spawn_attach_cmdline helper and use it in gdb.base/attach.exp. This helper starts GDB and adds the "--pid=$PID" argument. Also note that both the original and new implementation use gdb_spawn_with_cmdline_opts, which in the end uses default_gdb_spawn. This makes sure that we use $INTERNAL_GDBFLAGS, which by default already contain "-iex \"set height 0\" -iex \"set width 0\"". To avoid repetition of those arguments, gdb_spawn_attach_cmdline does not repeat those arguments. To maintain a behavior similat to what gdb.base/attach.exp used to do, gdb_spawn_attach_cmdline keeps the -quiet flag. Tested on x86_64-gnu-linux Change-Id: I1fdcdb71c86d9c5d34bb28fc86fac68bcec37358 2022-04-20 Tom Tromey Replace symbol_symtab with symbol::symtab This turns symbol_symtab into a method on symbol. It also replaces symbol_set_symtab with a method. Replace symbol_arch with symbol::arch This turns symbol_arch into a method on symbol. Replace symbol_objfile with symbol::objfile This turns symbol_objfile into a method on symbol. Remove symbol::aclass_index Symbols have an aclass_index method, but this isn't needed, because the aclass index isn't useful outside of the symbol implementation. Use array_view for symbol_impls It seemed to me that using array_view for symbol_impls would give a bit more error checking, at least when gdb is built in libstdc++ debug mode. Add accessors for symbol's artificial field For a series I'm experimenting with, it was handy to hide a symbol's "artificial" field behind accessors. This patch is the result. Unify the DWARF index holders The dwarf2_per_bfd object has a separate field for each possible kind of index. Until an earlier patch in this series, two of these were even derived from a common base class, but still had separate slots. This patch unifies all the index fields using the common base class that was introduced earlier in this series. This makes it more obvious that only a single index can be active at a time, and also removes some code from dwarf2_initialize_objfile. Add an ad hoc version check to dwarf_scanner_base Some generic code in the DWARF reader has a special case for older versions of .gdb_index. This patch adds an ad hoc version check method so that these spots can work without specific knowledge of which index is in use. Simplify version check in dw2_symtab_iter_next This simplifies the index versio check in dw2_symtab_iter_next, by passing a reference to the index object to this function. This avoids an indirection via the per_bfd object. Introduce and use dwarf_scanner_base This introduces dwarf_scanner_base, a base class for all the index readers in the DWARF code. Then, it changes both mapped_index_base and cooked_index_vector to derive from this new base class. Introduce readnow_functions This introduces readnow_functions, a new subclass of dwarf2_base_index_functions, and changes the DWARF reader to use it. This lets us drop the "index is NULL" hack from the gdb index code. Remove some "OBJF_READNOW" code from dwarf2_debug_names_index The dwarf2_debug_names_index code treats a NULL debug_names_table as if it were from OBJF_READNOW. However, this trick is only done for gdb_index, never for debug_names -- see dwarf2_initialize_objfile. Let mapped index classes create the quick_symbol_functions object This changes the mapped index classes to create the quick_symbol_functions objects. This is a step toward having a more abstract interface to mapped indices. Give mapped_index_base a virtual destructor This changes mapped_index_base to have a virtual destructor, so it can be destroyed via its base class. Move mapped_index_base to new header file This moves mapped_index_base and the helper struct name_component to a new header file in gdb/dwarf2/. 2022-04-20 Jan Beulich x86: reject all invalid SAE variants So far an SAE-only specifier was accepted for static-rounding insns, while SAE-only insns didn't accept static rounding specifiers. If anything it would make sense the other way around, allowing SAE-only insns to have the (ignored) rounding mode specified individually rather than globally via -mevexrcig=. But for now make things match the SDM. 2022-04-20 Alan Modra Re: xcoff: implement linker relaxation * xcofflink.c (xcoff_stub_csect_name): Increase buffer size. (xcoff_stub_get_csect_in_range, xcoff_build_one_stub): Whitespace. (bfd_xcoff_size_stubs): Cast PRIx64 arg to required type. Don't use freed stub_name. Revert "as: Reject unknown -gXXX option" testsuite This reverts the test committed as part of 6ea673e2d6. 2022-04-20 Cl?ment Chigot xcoff: implement linker relaxation bfd/ChangeLog: * coff-rs6000.c (xcoff_reloc_type_noop): Add info argument. (xcoff_reloc_type_fail): Likewise. (xcoff_reloc_type_pos): Likewise. (xcoff_reloc_type_neg): Likewise. (xcoff_reloc_type_rel): Likewise. (xcoff_reloc_type_toc): Likewise. (xcoff_reloc_type_ba): Likewise. (xcoff_reloc_type_crel): Likewise. (xcoff_reloc_type_tls): Likewise. (xcoff_reloc_type_br): Add stub handler. (xcoff_ppc_relocate_section): Add info to xcoff_calculate_relocation. (xcoff_stub_indirect_call_code): New constant. (xcoff_stub_shared_call_code): Likewise. (bfd_xcoff_backend_data): Add stub code fields. (bfd_pmac_xcoff_backend_data): Likewise. * coff64-rs6000.c (xcoff64_reloc_type_br): Add stub handler. (xcoff64_ppc_relocate_section): Add info to xcoff64_calculate_relocation. (xcoff64_stub_indirect_call_code): New constant. (xcoff64_stub_shared_call_code): Likewise. (bfd_xcoff_backend_data): Add stub code fields. (bfd_xcoff_aix5_backend_data): Likewise. * libxcoff.h (struct xcoff_backend_data_rec): Add stub fields. (bfd_xcoff_stub_indirect_call_code): New define. (bfd_xcoff_stub_indirect_call_size): New define. (bfd_xcoff_stub_shared_call_code): New define. (bfd_xcoff_stub_shared_call_size): New define. (xcoff_reloc_function): Add info argument. (enum xcoff_stub_type): New enum. (struct xcoff_stub_hash_entry): New structure. * xcofflink.c (struct xcoff_link_hash_table): Add stub hash table and params fields. (xcoff_stub_hash_entry): New define. (xcoff_stub_hash_lookup): New define. (stub_hash_newfunc): New function. (_bfd_xcoff_bfd_link_hash_table_free): Free the new stub hash table. (_bfd_xcoff_bfd_link_hash_table_create): Create the new stub hash table. (xcoff_link_add_symbols): Save rawsize for XTY_SD. (bfd_xcoff_link_init): New function. (xcoff_stub_csect_name): New function. (xcoff_stub_get_csect_in_range): New function. (xcoff_stub_name): New function. (bfd_xcoff_get_stub_entry): New function. (bfd_xcoff_type_of_stub): New function. (xcoff_add_stub): New function. (xcoff_build_one_stub): New function. (bfd_xcoff_size_stubs): New function. (bfd_xcoff_build_stubs): New function. (xcoff_stub_create_relocations): New function. (xcoff_link_input_bfd): Adapt relocations to stub. (xcoff_write_global_symbol): Adapt to new TOC entries generated for stubs. (_bfd_xcoff_bfd_final_link): Handle stub file. * xcofflink.h (struct bfd_xcoff_link_params): New structure. ld/ChangeLog: * emultempl/aix.em (params): New variable. (stub_file): New variable. (xcoff_add_stub_section): New function. (xcoff_layout_sections_again): New function (hook_in_stub): New function. (_after_allocation): Add stub creation. (_create_output_section_statements): Allocate stub file and pass params to backend. 2022-04-20 Cl?ment Chigot Stubs (added in a later patch) will generate new .loader symbols, once the allocations have been done. Thus, the .loader section cannot be layout before that. bfd/ChangeLog: * coff-rs6000.c (_bfd_xcoff_put_ldsymbol_name): Write len in ldinfo->strings instead of directly in the output_bfd. * coff64-rs6000.c (_bfd_xcoff64_put_ldsymbol_name): Likewise. * xcofflink.c (struct xcoff_link_hash_table): Remove ldrel_count field. Add ldinfo field. (xcoff_mark_symbol): Adjust to new ldinfo field. (xcoff_mark): Likewise. (bfd_xcoff_link_count_reloc): Likewise. (xcoff_build_loader_section): Split into two functions: one that build the loader section (this function) and one that only size it... (xcoff_size_loader_section): ... (this function). (bfd_xcoff_size_dynamic_sections): Adapt to new ldinfo field. Move the part where the dynamic sections are build to ... (bfd_xcoff_build_dynamic_sections): ... this function. * xcofflink.h: Add bfd_xcoff_build_dynamic_sections prototype. include/ChangeLog: * coff/xcoff.h (struct xcoff_loader_info): Add ldrel_count and libpath fields. ld/ChangeLog: * emultempl/aix.em (_after_allocation): New function. 2022-04-20 Tom Tromey Use symbol_symtab accessor in compile-object-load.c I noticed that compile-object-load.c directly references owner.symtab of a symbol. However, I think it's better for all users to call symbol_symtab. This patch makes this change. 2022-04-20 Nick Clifton Add linker warning for when it creates an executable stack. PR 29072 2022-04-20 Tom Tromey Micro-optimize cooked_index_entry::full_name I noticed that cooked_index_entry::full_name can return the canonical string when there is no parent entry. Regression tested on x86-64 Fedora 34. 2022-04-20 Tiezhu Yang gdb: LoongArch: Implement loongarch_scan_prologue() If can't determine prologue from the symbol table, need to examine instructions. Implement loongarch_scan_prologue() to analyze the function prologue from START_PC to LIMIT_PC, return the address of the first instruction past the prologue. 2022-04-20 GDB Administrator Automatic date update in version.in 2022-04-19 H.J. Lu as: Reject unknown -gXXX option * as.c (parse_args): Reject unknown -gXXX option. * testsuite/gas/all/empty.s: New file. * testsuite/gas/all/pr29067.d: Likewise. * testsuite/gas/all/pr29067.err: Likewise. * testsuite/gas/all/gas.exp: Run pr29067. 2022-04-19 Lancelot SIX gdb/selftest-arch: Make register_test_foreach_arch generate arch tests lazily The register_test_foreach_arch is used to instantiate a given selftest for all architectures supported by GDB. It is used in many _initialize_* functions (under initialize_all_files, called by gdb_init). Because the call is done during GDB's initialization, and because there is no guaranty about the order in which all the _initialize_* functions are executed, when register_test_foreach_arch is called, GDB is not fully initialized. Specifically, when a particular initialize function is executed, only the architectures registered at that point are listed by gdbarch_printable_names. As a consequence, the list of selftest effectively executed depends on the order the _initialize_* functions are called. This can be observed with the following: $ ./gdb/gdb \ -data-directory ./gdb/data-directory \ -quiet -batch -ex "maint selftest" 2>&1 \ | grep -E "Ran [0-9]+ unit tests" Ran 145 unit tests, 0 failed $ GDB_REVERSE_INIT_FUNCTIONS=1 ./gdb/gdb \ -data-directory ./gdb/data-directory \ -quiet -batch -ex "maint selftest" 2>&1 \ | grep -E "Ran [0-9]+ unit tests" Ran 82 unit tests, 0 failed To fix this, make register_test_foreach_arch register a lazy selftest generator. This way when the test generator is eventually executed, all architectures are registered and we do not have a dependency on the order the initialize functions are executed in. Tested on x86_64-linux Change-Id: I88eefebf7d372ad672f42d3a103e89354bc8a925 2022-04-19 Lancelot SIX gdbsupport/selftest: Allow lazy registration This patch adds a way to delay the registration of tests until the latest possible moment. This is intended for situations where GDB needs to be fully initialized in order to decide if a particular selftest can be executed or not. This mechanism will be used in the next patch. Change-Id: I7f6b061f4c0a6832226c7080ab4e3a2523e1b0b0 2022-04-19 Lancelot SIX gdbsupport/selftest: Replace for_each_selftest with an iterator_range Remove the callback-based selftests::for_each_selftest function and use an iterator_range instead. Also use this iterator range in run_tests so all iterations over the selftests are done in a consistent way. This will become useful in a later commit. Change-Id: I0b3a5349a7987fbcb0071f11c394e353df986583 2022-04-19 Jan Beulich x86: don't mistake ordinary immediates for SAE / rounding control The way SAE templates are constructed was always puzzling me (including the need for separate templates in the first place), and expressing the extzra attribute via Imm8 actually has a bad effect: Ordinary immediates would also be accepted, leading to an extra byte being added after the instruction (i.e. generating bad code). Before re-working this (in particular to accept proper Intel syntax there), fix the immediate issue by adding the so far missing check. x86: VCMPSH is Evex.LLIG These were mistakenly flagged as Evex.128. Getting the LLIG status right for insns allowing for SAE is a prereq for planned further work. x86: drop stray CheckRegSize from VFPCLASSPH Like VFPCLASSP{S,D} it has only a single operand allowing multiple sizes, hence there are no pairs of operands to check for consistent size. x86/Intel: test non-legacy VCVT{,U}SI2SH insn forms For an unclear reason corresponding AVX512F tests were apparently not cloned or used as reference here, and instead the bogus legacy forms of the insns (with the embedded rounding specifier not last) were used. 2022-04-19 Jan Beulich x86: correct and simplify NOP disassembly It's not just REX.W which is ignored with opcode 0x90. The same goes for REX.R and REX.X as well as empty REX. None of these are forms of "xchg %eax,%eax" (which would mean zero-extending %eax to %rax), so they also shouldn't be disassembled this way. While there simplify things: A single hook function suffices, thus making it unnecessary to keep two expressions in sync. And checking ins->address_mode for mode_64bit also is unnecessary, as "rex" can be non-zero only in that case anyway. 2022-04-19 GDB Administrator Automatic date update in version.in 2022-04-18 Simon Marchi gdb/testsuite/dwarf: don't automatically add directory and file entry for DWARF 5 To support DWARF 5 in the DWARF assembler line tables, we currently copy the first user-provided directory and the first user-provided files and make them elements at indices 0 in the directory and file name tables. That was a sufficient behavior at the time (see commit 44fda089397a ("[gdb/testsuite] Support .debug_line v5 in dwarf assembler")), but in the following patches, I would need to have finer grained control on what is generated exactly. For example, I'd like to generate a DWARF 5 line table with just a single file and a single directory. Get rid of this behavior, and implement what is suggested in 44fda089397a: make include_dir return the directory index that can be used to refer to that directory entry (based on the DWARF version), and use it afterwards. Adjust dw2-lines.exp and dw2-prologue-end.exp accordingly. Their produced DWARF5 binaries will change a bit, in that they will now have a single directory and file, where they had two before. But it doesn't change the expected GDB behavior. Change-Id: I5459b16ac9b7f28c34c9693c35c9afd2ebb3aa3b 2022-04-18 Simon Marchi gdb: use gdb_tilde_expand instead of gdb_tilde_expand_up in source_script_with_search Since this is the latest use of gdb_tilde_expand_up, remove it. Change-Id: I964c812ce55fe087876abf91e7a3577ad79c0425 2022-04-18 Simon Marchi gdbsupport: make gdb_realpath_keepfile return an std::string I'm trying to switch these functions to use std::string instead of char arrays, as much as possible. Some callers benefit from it (can avoid doing a copy of the result), while others suffer (have to make one more copy). Change-Id: I793aab17baaef8345488f4c40b9094e2695425bc 2022-04-18 Simon Marchi gdbsupport: make gdb_abspath return an std::string I'm trying to switch these functions to use std::string instead of char arrays, as much as possible. Some callers benefit from it (can avoid doing a copy of the result), while others suffer (have to make one more copy). Change-Id: Iced49b8ee2f189744c5072a3b217aab5af17a993 2022-04-18 Simon Marchi gdb: call gdb_tilde_expand instead of gdb_tilde_expand_up in source_script_with_search This removes a use of gdb_tilde_expand_up, which is removed later in this series. Change-Id: I5887d526cea987103e4ca24514a982b0a28e992a 2022-04-18 Tom Tromey Update gnulib This updates gnulib to a relatively recent commit. Most of this was done by the gnulib import script; the only change I made was to update-gnulib.sh. Tested on x86-64 Fedora 34. I also did a mingw cross build. 2022-04-18 Tom Tromey Fix C++ cast of derived class to base class PR c++/28907 points out that casting from a derived class to a base class fails in some situations. The problem turned out to be a missing use of value_embedded_offset. One peculiarity here is that, if you managed to construct a pointer-to-derived with an embedded offset of 0, the cast would work -- for example, one of the two new tests here passes without the patch. This embedded offset stuff is an endless source of bugs. I wonder if it's possible to get rid of it somehow. Regression tested on x86-64 Fedora 34. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28907 2022-04-18 Simon Marchi gdb/testsuite: make gdb.ada/mi_prot.exp stop at expected location This test attempts to run until the line marked "STOP", which is at prot.adb:34. It first runs until the "main" symbol, then tries to place a breakpoint by line at line 34, without specifying the source file. When looking at the logs: -break-insert -t 34^M ^done,bkpt={number="2",type="breakpoint",disp="del",enabled="y",addr="0x0000555555558a6c",func="adafinal",file="/home/simark/build/binutils-gdb-one-target/gdb/testsuite/outputs/gdb.ada/mi_pro t/b~prot.adb",fullname="/home/simark/build/binutils-gdb-one-target/gdb/testsuite/outputs/gdb.ada/mi_prot/b~prot.adb",line="44",thread-groups=["i1"],times="0",original-location="/home/simark/b uild/binutils-gdb-one-target/gdb/testsuite/outputs/gdb.ada/mi_prot/b~prot.adb:34"}^M ... continues ... *stopped,reason="breakpoint-hit",disp="del",bkptno="2",frame={addr="0x0000555555558a6c",func="adafinal",args=[],file="/home/simark/build/binutils-gdb-one-target/gdb/testsuite/outputs/gdb.ada/ mi_prot/b~prot.adb",fullname="/home/simark/build/binutils-gdb-one-target/gdb/testsuite/outputs/gdb.ada/mi_prot/b~prot.adb",line="44",arch="i386:x86-64"},thread-id="1",stopped-threads="all",co re="8"^M ... we see that the breakpoint is placed in some generated file, not in the test source file as we expect. The problem is that "b main" in Ada does not place a breakpoint on the "Ada main", but on some symbol in a generated source file. So when stopped at the "main" symbol, we are not stopped in the file that contains the STOP marker at line 34. The test passes anyway today, so it doesn't seem to matter that we are stopped at an unexpected location. But it starts failing with this patch [1], because b~prot.adb:34 happens to be between two functions, so the breakpoint doesn't resolve. Fix this by placing the breakpoint at "$srcfile:$line", which works regardless of what is the current source file. However, this ends up introducing a path in the test name. Modify mi_tbreak and mi_continue_to_line to avoid that. [1] https://sourceware.org/pipermail/gdb-patches/2022-April/187686.html Change-Id: I742e2a9993046dcb5e30c64fe2ad920a363baf75 2022-04-18 Vignesh Balasubramanian gdb/testsuite: add text_segment option to gdb_compile LLVM's lld linker doesn't have the "-Ttext-segment" option, but "--image-base" can be used instead. To centralize the logic of checking which option is supported, add the text_segment option to gdb_compile. Change tests that are currently using -Ttext-segment to use that new option instead. This patch fixes only compilation error, for example: Before: $ make check TESTS="gdb.base/jit-elf.exp" RUNTESTFLAGS="CC_FOR_TARGET=clang LDFLAGS_FOR_TARGET=-fuse-ld=ld" Running /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/jit-elf.exp ... gdb compile failed, clang-13: warning: -Xlinker -Ttext-segment=0x7000000: 'linker' input unused [-Wunused-command-line-argument] After: $ make check TESTS="gdb.base/jit-elf.exp" RUNTESTFLAGS="CC_FOR_TARGET=clang LDFLAGS_FOR_TARGET=-fuse-ld=ld" Running /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/jit-elf.exp ... FAIL: gdb.base/jit-elf.exp: one_jit_test-1: continue to breakpoint: break here 1 FAIL: gdb.base/jit-elf.exp: one_jit_test-1: continue to breakpoint: break here 2 FAIL: gdb.base/jit-elf.exp: one_jit_test-2: continue to breakpoint: break here 1 FAIL: gdb.base/jit-elf.exp: one_jit_test-2: info function ^jit_function FAIL: gdb.base/jit-elf.exp: one_jit_test-2: continue to breakpoint: break here 2 FAIL: gdb.base/jit-elf.exp: attach: one_jit_test-2: continue to breakpoint: break here 1 FAIL: gdb.base/jit-elf.exp: attach: one_jit_test-2: break here 1: attach FAIL: gdb.base/jit-elf.exp: PIE: one_jit_test-1: continue to breakpoint: break here 1 FAIL: gdb.base/jit-elf.exp: PIE: one_jit_test-1: continue to breakpoint: break here 2 === gdb Summary === # of expected passes 26 # of unexpected failures 9 Change-Id: I3678c5c9bbfc2f80671698e28a038e6b3d14e635 2022-04-18 Enze Li gdb: fix using clear command to delete non-user breakpoints(PR cli/7161) The clear command shouldn't delete momentary and internal breakpoints, nor internal breakpoints created via Python's gdb.Breakpoint. This patch fixes this issue and adds a testcase. Regression tested on x86_64 openSUSE Tumbleweed(VERSION_ID="20220413"). Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7161 2022-04-18 GDB Administrator Automatic date update in version.in 2022-04-17 GDB Administrator Automatic date update in version.in 2022-04-16 Tom Tromey Add comments to dwarf2/abbrev-cache.h This patch started when I noticed that the unordered_set include wasn't needed in abbrev-cache.h. (That was probably leftover from some earlier implementation of the class.) Then, I noticed that the class itself was under-commented. This patch fixes both issues. 2022-04-16 GDB Administrator Automatic date update in version.in 2022-04-15 Tom Tromey Return void from gdb_putc I don't think it's very useful to return the character from gdb_putc, so this patch changes it to return void. 2022-04-15 Tom Tromey Handle "set height 1" PR cli/17151 points out that "set height 1" has pathological behavior in gdb. What I see is that gdb will endlessly print the pagination prompt. This patch takes a simple and expedient approach to a fix: pretend that the height is really 2. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17151 2022-04-15 Tom Tromey Allow word wrapping even when paging is disabled PR cli/20741 points out that when pagination is disabled, this also disabled word wrapping. However, the manual documents that these settings are separate -- if you intend to disable the wrapping, you must use "set width unlimited". This patch fixes the bug by letting the pagination-disabled case fall through to the code that also handles word-wrapping. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=20741 2022-04-15 Tom Tromey Implement value_print for Rust This adds an implementation of the value_print method to Rust. As described in PR rust/22254, this removes a bit of weird-looking output from some "print"s -- because c_value_print is bypassed. I don't have a test for the bug that inspired this patch, because I only know how to reproduce it when using a relatively old Rust compiler. However, the new "cast-printing" code in value_print is required, because omitting this causes some existing tests to fail. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22254 2022-04-15 Tom Tromey Reimplement Rust slice printing The current nightly Rust compiler (aka 1.61) added better DWARF representation for unsized types. Fixing this is PR rust/21466; but the code is actually the same as what is required to make slice printing more useful, which is PR rust/23871. This patch implements this. I tested this against various Rust compilers: 1.48, current stable, current beta, and current nightly. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=21466 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=23871 2022-04-15 Tom Tromey Remove some dead code from the Rust value printer This removes a bit of dead code from the Rust value printer. This code wasn't always dead -- it fixed a real bug, and a test case was added for it. However, once val_print was removed, it became unnecessary. 2022-04-15 Tom Tromey Match rustc beta versions The rust_compiler_version proc extracts the Rust compiler version from the "rustc --version" output. For a beta compiler, the output looks like: rustc 1.60.0-beta.6 (7bccde197 2022-03-22) This patch slightly relaxes the regexp -- removing a space -- so that this can be understood by this proc. 2022-04-15 Tom de Vries [gdb/testsuite] Fix gdb.ada/float-bits.exp with -m32 With test-case gdb.ada/float-bits.exp and native we get: ... (gdb) print 16llf#7FFFF7FF4054A56FA5B99019A5C8#^M $9 = 5.0e+25^M (gdb) PASS: gdb.ada/float-bits.exp: print 16llf#7FFFF7FF4054A56FA5B99019A5C8# ... but with target board unix/-m32 we have instead: ... (gdb) print 16llf#7FFFF7FF4054A56FA5B99019A5C8#^M Cannot export value 2596145952482202326224873165792712 as 96-bits \ unsigned integer (must be between 0 and 79228162514264337593543950335)^M (gdb) FAIL: gdb.ada/float-bits.exp: print 16llf#7FFFF7FF4054A56FA5B99019A5C8# ... Fix this by testing whether 16llf is supported by doing ptype long_long_float which gets us either: ... type = <16-byte float>^M ... or: ... type = <12-byte float>^M ... Tested on x86_64-linux with native and unix/-m32. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29041 2022-04-15 Tom Tromey Remove WITH_SIM define Since score-tdep.c was removed, the WITH_SIM define is not used in gdb. This patch removes it. Note that re-running autoheader shows a separate change that was missed. I've kept it in this patch to avoid extra work. 2022-04-15 Tom de Vries [gdb/testsuite] Fix gdb.go/methods.exp with check-readmore When running test-case gdb.go/methods.exp with make check we have: ... (gdb) break main.T.Foo^M Function "main.T.Foo" not defined.^M Make breakpoint pending on future shared library load? (y or [n]) n^M (gdb) XFAIL: gdb.go/methods.exp: gdb_breakpoint: set breakpoint at main.T.Foo ... but with make check-readmore the XFAIL fails to trigger: ... (gdb) break main.T.Foo^M Function "main.T.Foo" not defined.^M Make breakpoint pending on future shared library load? (y or [n]) n^M (gdb) FAIL: gdb.go/methods.exp: gdb_breakpoint: set breakpoint at main.T.Foo ... This happens because this gdb_test_multiple "maintenance print symbols" regexp: ... -re "\r\n$gdb_prompt $" { ... matches the entire command output. Fix this by adding the missing ^ at the regexp start. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29064 2022-04-15 GDB Administrator Automatic date update in version.in 2022-04-14 Pedro Alves gdbserver: Eliminate prepare_to_access_memory Given: - The prepare_to_access_memory machinery was added for non-stop mode. - Only Linux supports non-stop. - Linux no longer needs the prepare_to_access_memory machinery. In fact, after the previous patch, linux_process_target::prepare_to_access_memory became a nop. Thus, prepare_to_access_memory can go away, simplifying core GDBserver code. Change-Id: I93ac8bfe66bd61c3d1c4a0e7d419335163120ecf 2022-04-14 Pedro Alves gdbserver/linux: Access memory even if threads are running Similarly to how the native Linux target was changed and subsequently reworked in these commits: 05c06f318fd9 Linux: Access memory even if threads are running 8a89ddbda2ec Avoid /proc/pid/mem races (PR 28065) ... teach GDBserver to access memory even when the current thread is running, by always accessing memory via /proc/PID/mem. The existing comment: /* Neither ptrace nor /proc/PID/mem allow accessing memory through a running LWP. */ ... is incorrect for /proc/PID/mem does allow that. Actually, from GDB's perspective, GDBserver could already access memory while threads were running, but at the expense of pausing all threads for the duration of the memory access, via prepare_to_access_memory. This new implementation does not require pausing any thread, thus linux_process_target::prepare_to_access_memory / linux_process_target::done_accessing_memory become nops. A subsequent patch will remove the whole prepare_to_access_memory infrastructure completely. The GDBserver linux-low.cc implementation is simpler than GDB's linux-nat.c's, because GDBserver always adds the unfollowed vfork/fork children to the process list immediately when the fork/vfork event is seen out of ptrace. I.e., there's no need to keep the file descriptor stored on a side map, we can store it directly in the process structure. Change-Id: I0abfd782ceaa4ddce8d3e5f3e2dfc5928862ef61 2022-04-14 Pedro Alves gdbserver: special case target_write_memory len==0 The next patch in this series adds a common helper routine for both memory reads and writes, like this: static int proc_xfer_memory (CORE_ADDR memaddr, unsigned char *readbuf, const gdb_byte *writebuf, int len) { gdb_assert ((readbuf == nullptr) != (writebuf == nullptr)); ... } int linux_process_target::read_memory (CORE_ADDR memaddr, unsigned char *myaddr, int len) { return proc_xfer_memory (memaddr, myaddr, nullptr, len); } linux_process_target::write_memory (CORE_ADDR memaddr, const unsigned char *myaddr, int len) { return proc_xfer_memory (memaddr, nullptr, myaddr, len); } Surprisingly, the assertion fails. That happens because it can happen that target_write_memory is called with LEN==0, due to this in gdb/remote.c: /* Determine whether the remote target supports binary downloading. This is accomplished by sending a no-op memory write of zero length to the target at the specified address. (...) */ void remote_target::check_binary_download (CORE_ADDR addr) { ... p = rs->buf.data (); *p++ = 'X'; p += hexnumstr (p, (ULONGEST) addr); *p++ = ','; p += hexnumstr (p, (ULONGEST) 0); *p++ = ':'; *p = '\0'; In this scenario, in gdbserver's target_write_memory, the "myaddr" argument of the_target->write_memory is passed the data() of a local gdb::byte_vector (which is a specialized std::vector). It's valid for std::vector::data() to return NULL when the vector is empty. This commit adds an early return to target_write_memory to avoid target backends having to care about this. For good measure, do the same on the read side, in read_inferior_memory. Change-Id: Iac8f04fcf99014c624ef4036bd318ca1771ad491 2022-04-14 Pedro Alves gdbserver/qXfer::threads, prepare_to_access_memory=>target_pause_all handle_qxfer_threads_proper needs to pause all threads even if the target can read memory when threads are running, so use target_pause_all instead, which is what the Linux implementation of prepare_to_access_memory uses. (Only Linux implements this hook.) A following patch will make the Linux backend be able to access memory when threads are running, and thus will also make prepare_to_access_memory do nothing, which would cause testsuite regressions without this change. Change-Id: I127fec7246b7c45b60dfa7341e781606bf54b5da 2022-04-14 Tom Tromey Ignore 0,0 entries in .debug_aranges When running the internal AdaCore test suite against the new DWARF indexer, I found one regression on RISC-V. The test in question uses --gc-sections, and winds up with an entry in the middle of a .debug_aranges that has both address and length of 0. In this scenario, gdb assumes the entries are terminated and then proceeds to reject the section because it reads a subsequent entry as if it were a header. It seems to me that, because each header describes the size of each .debug_aranges CU, it's better to simply ignore 0,0 entries and simply read to the end. That is what this patch does. I've patched an existing test to provide a regression test for this. 2022-04-14 Tom Tromey Use GetThreadDescription on Windows Windows 10 introduced SetThreadDescription and GetThreadDescription, a simpler way to set a thread's name. This changes gdb and gdbserver to use this convention when it is available. This is part of PR win32/29050. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29050 2022-04-14 Tom Tromey Set the worker thread name on Windows This patch is a bit different from the rest of the series, in that it is a change to gdb's behavior on the host. It changes gdb's thread pool to try to set the thread name on Windows, if SetThreadDescription is available. This is part of PR win32/29050. This patch isn't likely to be useful to many people in the short term, because the Windows port of the libstdc++ thread code is not upstream. (AdaCore uses it, and sent it upstream, but it did not land, I don't know why.) However, if that patch does ever go in, or presumably if you build using some other C++ runtime library, then this will be useful. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29050 2022-04-14 Tom Tromey Implement thread_name for gdbserver This changes gdbserver to implement thread_name method. Share handle_ms_vc_exception with gdbserver Currently, gdb's native Windows target implements the exception-based approach for setting thread names, but gdbserver does not. This patch moves handle_ms_vc_exception to the shared nat/windows-nat.c code, as preparation for adding this support to gdbserver. Move target_read_string to target/target.c This moves the two overloads of target_read_string to a new file, target/target.c, and updates both gdb and gdbserver to build this. Remove the byte order parameter to target_read_string target_read_string takes a byte order parameter, but only uses this to check whether a given character is zero. This is readily done without requiring the parameter, so remove it. Rename read_string This renames read_string to be an overload of target_read_string. This makes it more consistent for the eventual merger with gdbserver. Don't call QUIT in read_string read_string does not need to call QUIT, because target_read_memory already does. This change is needed to make string-reading usable by gdbserver. Fix possible Cygwin build problem I noticed that nat/windows-nat.c checks __USEWIDE, but nothing sets it there -- I forgot to copy over the definition when making this file. This patch tries to fix the problem. I don't have a Cygwin setup, so I don't know whether this is sufficient, but it's probably necessary. 2022-04-14 Lancelot SIX Pedro Alves gdb/testsuite: Fix race in gdb.dwarf2/calling-convention.exp Pedro Alves warned me that there is a race in gdb.dwarf2/calling-convention.exp making the test sometimes fail on his setup. This can be reliably reproduced using : make check-read1 TESTS="gdb.dwarf2/calling-convention.exp" The relevant part of the gdb.log file is: return 35 Function 'foo' does not follow the target calling convention. If you continue, setting the return value will probably lead to unpredictable behaviors. Make foo return now? (y or n) PASS: gdb.dwarf2/calling-convention.exp: return 35 n Not confirmed (gdb) FAIL: gdb.dwarf2/calling-convention.exp: finish The issue is that when doing the test for "return 35", the DejaGnu test sends "n" (to tell GDB not to perform the return action) but never consumes the "Not confirmed" acknowledgment sent by GDB. Later, when trying to do the next test, DejaGnu tries to match the leftover output from the "return" test. As this output is not expected, the test fails. Fix by using gdb_test to send the "n" answer and match the confirmation and consume all output to the prompt. Also do minor adjustments to the main regex: - Remove the leading ".*" which is not required. - Ensure that the "?" from the question is properly escaped. Tested on x86_64-gnu-linux, using - make check TESTS="gdb.dwarf2/calling-convention.exp" - make check-read1 TESTS="gdb.dwarf2/calling-convention.exp" - make check-readmore TESTS="gdb.dwarf2/calling-convention.exp" Change-Id: I42858b13db2cbd623c5c1739de65ad423e0c0938 2022-04-14 Tom Tromey Silence -Wmaybe-uninitialized warning from target_waitstatus Currently, one use of target_waitstatus yields a warning: target/waitstatus.h: In function 'void stop_all_threads()': target/waitstatus.h:175:13: warning: 'ws.target_waitstatus::m_value' may be used uninitialized in this function [-Wmaybe-uninitialized] 175 | m_value = other.m_value; | ~~~~~~~~^~~~~~~~~~~~~~~ This patch silences the warning. I tried the "volatile member" approach that was used for gdb::optional, but that didn't work, so this patch simply initializes the member. 2022-04-14 Tom Tromey Fix regression on Windows with WOW64 Internally at AdaCore, we recently started testing a 64-bit gdb debugging 32-bit processes. This failed with gdb head, but not with gdb 11. The tests fail like this: Starting program: [...].exe warning: Could not load shared library symbols for WOW64_IMAGE_SECTION. Do you need "set solib-search-path" or "set sysroot"? warning: Could not load shared library symbols for WOW64_IMAGE_SECTION. Do you need "set solib-search-path" or "set sysroot"? warning: Could not load shared library symbols for NOT_AN_IMAGE. Do you need "set solib-search-path" or "set sysroot"? warning: Could not load shared library symbols for NOT_AN_IMAGE. Do you need "set solib-search-path" or "set sysroot"? After some debugging and bisecting, to my surprise the bug was introduced by commit 183be222 ("gdb, gdbserver: make target_waitstatus safe"). The problem occurs in handle_exception. Previously the code did: - ourstatus->kind = TARGET_WAITKIND_STOPPED; [...] case EXCEPTION_BREAKPOINT: [...] - ourstatus->kind = TARGET_WAITKIND_SPURIOUS; [...] /* FALLTHROUGH */ case STATUS_WX86_BREAKPOINT: DEBUG_EXCEPTION_SIMPLE ("EXCEPTION_BREAKPOINT"); - ourstatus->value.sig = GDB_SIGNAL_TRAP; [...] - last_sig = ourstatus->value.sig; However, in the new code, the fallthrough case does: + ourstatus->set_stopped (GDB_SIGNAL_TRAP); ... which changes the 'kind' in 'ourstatus' after falling through. This patch rearranges the 'last_sig' setting to more closely match what was done before (this is probably not strictly needed but also seemed harmless), and removes the fall-through in the 'ignore_first_breakpoint' case when __x86_64__ is defined. 2022-04-14 Tom Tromey Reorganize Python events documentation This slightly reorganizes the Python events documentation. It hoists the "ThreadEvent" text out of the list of events, where it seemed to be misplaced. It tidies the formatting a little bit (adding some vertical space for easier reading in info), fixes a typo, adds some missing commas, and fixes an incorrect reference to NewInferiorEvent. 2022-04-14 Simon Marchi gdb: remove move constructor and move assignment operator from cooked_index Building with clang++-14, I see: CXX dwarf2/cooked-index.o In file included from /home/smarchi/src/binutils-gdb/gdb/dwarf2/cooked-index.c:21: /home/smarchi/src/binutils-gdb/gdb/dwarf2/cooked-index.h:172:12: error: explicitly defaulted move constructor is implicitly deleted [-Werror,-Wdefaulted-function-deleted] explicit cooked_index (cooked_index &&other) = default; ^ /home/smarchi/src/binutils-gdb/gdb/dwarf2/cooked-index.h:225:16: note: move constructor of 'cooked_index' is implicitly deleted because field 'm_storage' has a deleted move constructor auto_obstack m_storage; ^ /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/gdb_obstack.h:128:28: note: 'auto_obstack' has been explicitly marked deleted here DISABLE_COPY_AND_ASSIGN (auto_obstack); ^ In file included from /home/smarchi/src/binutils-gdb/gdb/dwarf2/cooked-index.c:21: /home/smarchi/src/binutils-gdb/gdb/dwarf2/cooked-index.h:174:17: error: explicitly defaulted move assignment operator is implicitly deleted [-Werror,-Wdefaulted-function-deleted] cooked_index &operator= (cooked_index &&other) = default; ^ /home/smarchi/src/binutils-gdb/gdb/dwarf2/cooked-index.h:225:16: note: move assignment operator of 'cooked_index' is implicitly deleted because field 'm_storage' has a deleted move assignment operator auto_obstack m_storage; ^ /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/gdb_obstack.h:128:3: note: 'operator=' has been explicitly marked deleted here DISABLE_COPY_AND_ASSIGN (auto_obstack); ^ /home/smarchi/src/binutils-gdb/gdb/../include/ansidecl.h:425:8: note: expanded from macro 'DISABLE_COPY_AND_ASSIGN' void operator= (const TYPE &) = delete ^ We explicitly make cooked_index have a default move constructor and move assignment operator. But it doesn't actually happen because cooked_index has a field of type auto_obstack, which isn't movable. We don't actually need cooked_index to be movable at the moment, so remove those lines. Change-Id: Ifc1fe3d7d67e3ae1a14363d6c1869936fe80b0a2 2022-04-14 Tom Tromey Let std::thread check pass even without pthreads Currently, the configure check for std::thread relies on pthreads existing. However, this means that if std::thread is implemented for a non-pthreads host, then the check will yield the wrong answer. This happened in AdaCore internal builds. Here, we have this GCC patch: https://gcc.gnu.org/legacy-ml/gcc-patches/2019-06/msg01840.html ... which adds mingw support to GCC's gthreads implementation, and also to std::thread. This configure change fixes this problem and enables threading for gdb. 2022-04-14 Tiezhu Yang gdb: fix build errors in gdbsupport/thread-pool.h used with old gcc When I build gdb with gcc 8.3, there exist the following build errors, rename the typedef to task_t to fix them. CXX thread-pool.o In file included from /home/loongson/gdb.git/gdbsupport/thread-pool.cc:21: /home/loongson/gdb.git/gdbsupport/../gdbsupport/thread-pool.h: In member function ‘std::future gdb::thread_pool::post_task(std::function&&)’: /home/loongson/gdb.git/gdbsupport/../gdbsupport/thread-pool.h:69:44: error: declaration of ‘task’ shadows a previous local [-Werror=shadow=local] std::packaged_task task (std::move (func)); ^~~~ /home/loongson/gdb.git/gdbsupport/../gdbsupport/thread-pool.h:102:39: note: shadowed declaration is here typedef std::packaged_task task; ^~~~ /home/loongson/gdb.git/gdbsupport/../gdbsupport/thread-pool.h: In member function ‘std::future<_Res> gdb::thread_pool::post_task(std::function&&)’: /home/loongson/gdb.git/gdbsupport/../gdbsupport/thread-pool.h:80:41: error: declaration of ‘task’ shadows a previous local [-Werror=shadow=local] std::packaged_task task (std::move (func)); ^~~~ /home/loongson/gdb.git/gdbsupport/../gdbsupport/thread-pool.h:102:39: note: shadowed declaration is here typedef std::packaged_task task; ^~~~ 2022-04-14 Tom de Vries [gdb/testsuite] Detect 'No MPX support' On openSUSE Leap 15.3, mpx support has been disabled for m32, so I run into: ... (gdb) run ^M Starting program: outputs/gdb.arch/i386-mpx/i386-mpx ^M [Thread debugging using libthread_db enabled]^M Using host libthread_db library "/lib64/libthread_db.so.1".^M No MPX support^M ... and eventually into all sort of fails in this and other mpx test-cases. Fix this by detecting the "No MPX support" message in have_mpx. Tested on x86_64-linux with target boards unix and unix/-m32. 2022-04-14 Sergei Trofimovich M68K: avoid quadratic slowdlow in label alignment check Before the change tc-m68k maintained a list of seen labels. Alignment check traversed label list to resolve symbol to label. This caused quadratic slowdown as each symbol was checked against each label. Worst affected files are the ones built with debugging enabled as DWARF generates many labels. The change embeds auxiliary label information right into symbol using TC_SYMFIELD_TYPE. Before the change test from PR 29058 did not finish in 10 minutes. After the change it finishes in 2 seconds. gas/ChangeLog: PR 29058 * config/tc-m68k.h (TC_SYMFIELD_TYPE): define as m68k_tc_sy. * config/tc-m68k.c (m68k_frob_label): Use TC_SYMFIELD_TYPE to store label information. 2022-04-14 caiyinyu ld:LoongArch: Fix glibc fail: tst-audit25a/b. bfd/ * elfnn-loongarch.c: Add new func elf_loongarch64_hash_symbol. 2022-04-14 GDB Administrator Automatic date update in version.in 2022-04-13 Simon Marchi gdb: add ATTRIBUTE_PRINTF to complaint_interceptor::issue_complaint Fix this error when building with clang++-14: CXX complaints.o /home/smarchi/src/binutils-gdb/gdb/complaints.c:130:65: error: format string is not a string literal [-Werror,-Wformat-nonliteral] g_complaint_interceptor->m_complaints.insert (string_vprintf (fmt, args)); ^~~ Change-Id: I0ef11f970510eb8638d1651fa0d5eeecd6a9d31a 2022-04-13 Simon Marchi gdb: fix clang build failure in msymbol_is_mips Building with clang++-14, I see: CXX mips-tdep.o /home/smarchi/src/binutils-gdb/gdb/mips-tdep.c:453:12: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical] return !(MSYMBOL_TARGET_FLAG_MIPS16 (msym) ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/smarchi/src/binutils-gdb/gdb/mips-tdep.h:54:2: note: expanded from macro 'MSYMBOL_TARGET_FLAG_MIPS16' (sym)->target_flag_1 () ^ /home/smarchi/src/binutils-gdb/gdb/mips-tdep.c:453:12: note: cast one or both operands to int to silence this warning /home/smarchi/src/binutils-gdb/gdb/mips-tdep.h:54:2: note: expanded from macro 'MSYMBOL_TARGET_FLAG_MIPS16' (sym)->target_flag_1 () ^ That's since commit e165fcef1e7 ("gdb: remove MSYMBOL_TARGET_FLAG_{1,2} macros"). Fix this by using the boolean || rather than the bitwise |, since the new methods return bool values. No change in behavior expected. Change-Id: Ia82664135aa25db64c29c92f5c1141859d345bf7 2022-04-13 Alexander von Gluck IV binutils: enable PE on 32bit haiku build * config.bfd (x86-haiku): Add i386_pei_vec as a selectable format. 2022-04-13 Pedro Alves Make intrusive_list_node's next/prev private Tromey noticed that intrusive_list_node leaves its data members public, which seems sub-optimal. This commit makes intrusive_list_node's data fields private. intrusive_list_iterator, intrusive_list_reverse_iterator, and intrusive_list do need to access the fields, so they are made friends. Change-Id: Ia8b306b40344cc218d423c8dfb8355207a612ac5 2022-04-13 Pedro Alves Tidy gdb.base/parse_number.exp Now that Ada is able to parse & print 0xffffffffffffffff (2^64-1) in hex, move it to the else branch like most other languages. Change-Id: Ib305f6bb2b6b230a1190ea783b245b865821094c 2022-04-13 Alan Modra ubsan: member access within null pointer of union Add some nonsense to cover "undefined behaviour". * ldlang.c (section_for_dot): Avoid UB. 2022-04-13 GDB Administrator Automatic date update in version.in 2022-04-12 Tom Tromey Fix bug in Ada number lexing On irc, Pedro pointed out that Ada couldn't properly handle 0xffffffffffffffff. This used to work, but is a regression due to some patches I wrote in the Ada lexer. This patch fixes the bug. 2022-04-12 Simon Marchi gdb: fix "passing NULL to memcpy" UBsan error in dwarf2/cooked-index.c Reading a simple file compiled with : $ gcc -DONE=1 -gdwarf-4 -g3 test.c $ gcc --version gcc (Ubuntu 9.4.0-1ubuntu1~20.04) 9.4.0 I get: Reading symbols from /tmp/cwd/a.out... /home/smarchi/src/binutils-gdb/gdb/dwarf2/cooked-index.c:332:11: runtime error: null pointer passed as argument 2, which is declared to never be null It looks like even if the size is 0 (the size of the `entries` vector is 0), we shouldn't be passing a NULL pointer to memcpy. And `entries.data ()` returns NULL. Fix that by using std::vector::insert to insert the items of entries into m_entries. I haven't checked, but it should essentially compile down to a memcpy, since the vector elements are trivially copyiable. Change-Id: I75f1c901e9b522e42e89eb5936e2c70d68eb21e5 2022-04-12 Simon Marchi gdb: change subfile::line_vector to an std::vector Change this field to an std::vector to facilitate memory management. Since the linetable_entry array is copied into the symtab resulting from the subfile, it is possible to change it without changing how symtab stores the linetable entries (which would be a much larger change). There is a small change in buildsym_compunit::record_line to avoid accessing a now invalid linetable_entry. Before this patch, we keep a pointer to the last linetable entry, pop it from the vector, and then read last->line. It works with the manually-maintained array, but since we now use std::vector::pop_back, I am afraid that it could be flagged as an invalid access by the various static / dynamic analysis tools to access the linetable_entry object after popping it from the vector. Instead, record just the line number in an optional and use it. There are substantial changes in xcoffread.c that simplify the code, but I can't test them. I was hesitant to do this change because of that, but I decided to send it anyway. I don't think that an almost dead platform should hold back improving the code in the common parts of GDB. The changes in xcoffread.c are: - Make arrange_linetable "arrange" the linetable passed as a parameter, instead of returning possibly a new one, possibly the same one. - In the "Process main file's line numbers.", I'm not too sure what happens. We get the lintable from "main_subfile", "arrange" it, but then assign the result to the current subfile, obtained with get_current_subfile. I assume that the current subfile is also the main one, so now I just call arrange_linetable on the main subfile's line table. - Remove that weird "Useless if!!!" FIXME comment. It's been there forever, but the "if" is still there, so I guess the "if" can stay there. Change-Id: I11799006fd85189e8cf5bd3a168f8f38c2c27a80 2022-04-12 Simon Marchi gdb: use std::vector for temporary linetable_entry array in arrange_linetable Reduce manual memory management and make the code a bit easier to read. This helps me a bit in the following patch. I don't have a way to test this, it's best-effort. Change-Id: I64af9cd756311deabc6cd95e701dfb21234a40a5 2022-04-12 Simon Marchi gdb: change subfile::name and buildsym_compunit::m_comp_dir to strings Change subfile::name to be a string, for easier memory management. Change buildsym_compunit::m_comp_dir as well, since we move one in to the other at some point in patch_subfile_names, so it's easier to do both at the same time. There are various NULL checks for both fields currently, replace them with empty checks, I think it ends up equivalent. I can't test the change in xcoffread.c, it's best-effort. Change-Id: I62b5fb08b2089e096768a090627ac7617e90a016 2022-04-12 Simon Marchi gdb: allocate subfile with new Allocate struct subfile with new, initialize its fields instead of memset-ing it to 0. Use a unique_ptr for the window after a subfile has been allocated but before it is linked in the buildsym_compunit's list of subfile (and therefore owned by the buildsym_compunit. I can't test the change in xcoffread.c, it's best-effort. I couldn't find where subfiles are freed in that file, I assume they were intentionally (or not) leaked. Change-Id: Ib3b6877de31b7e65bc466682f08dbf5840225f24 2022-04-12 Simon Marchi gdb: use decltype instead of typeof in dwarf2/read.c When building with -std=c++11, I get: CXX dwarf2/read.o /home/smarchi/src/binutils-gdb/gdb/dwarf2/read.c: In function ‘void dwarf2_build_psymtabs_hard(dwarf2_per_objfile*)’: /home/smarchi/src/binutils-gdb/gdb/dwarf2/read.c:7130:23: error: expected type-specifier before ‘typeof’ 7130 | using iter_type = typeof (per_bfd->all_comp_units.begin ()); | ^~~~~~ This is because typeof is a GNU extension. Use C++'s decltype keyword instead. Change-Id: Ieca2e8d25e50f71dc6c615a405a972a54de3ef14 2022-04-12 Simon Marchi gdbsupport: use result_of_t instead of result_of in parallel-for.h When building with -std=c++11, I get: In file included from /home/smarchi/src/binutils-gdb/gdb/unittests/parallel-for-selftests.c:22: /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/parallel-for.h:134:10: error: ‘result_of_t’ is not a member of ‘std’; did you mean ‘result_of’? 134 | std::result_of_t | ^~~~~~~~~~~ | result_of This is because result_of_t has been introduced in C++14. Use the equivalent result_of<...>::type instead. result_of and result_of_t have been removed in C++20 though, so I think we'll need some patches eventually to make the code use invoke_result instead, depending on the C++ version. Change-Id: I4817f361c0ebcdd4b32976898fc368bb302b61b9 2022-04-12 Tom Tromey Remove dwarf2_per_cu_data::v Now that the psymtab reader has been removed, the dwarf2_per_cu_data::v union is no longer needed. Instead, we can simply move the members from dwarf2_per_cu_quick_data into dwarf2_per_cu_data and remove the "quick" object entirely. Delete DWARF psymtab code This removes the DWARF psymtab reader. 2022-04-12 Tom Tromey Enable the new DWARF indexer This patch finally enables the new indexer. It is left until this point in the series to avoid any regressions; in particular, it has to come after the changes to the DWARF index writer to avoid this problem. However, if you experiment with the series, this patch can be moved anywhere from the patch to wire in the new reader to this point. Moving this patch around is how I got separate numbers for the parallelization and background finalization patches. In the ongoing performance example, this reduces the time from the baseline of 1.598869 to 0.903534. 2022-04-12 Tom Tromey Adapt .debug_names writer to new DWARF scanner This updates the .debug_names writer to work with the new DWARF scanner. 2022-04-12 Tom Tromey Adapt .gdb_index writer to new DWARF scanner This updates the .gdb_index writer to work with the new DWARF scanner. The .debug_names writer is deferred to another patch, to make review simpler. This introduces a small hack to psyms_seen_size, but is inconsequential because this function will be deleted in a subsequent patch. 2022-04-12 Tom Tromey Genericize addrmap handling in the DWARF index writer This updates the DWARF index writing code to make the addrmap-writing a bit more generic. Now, it can handle multiple maps, and it can work using the maps generated by the new indexer. Note that the new addrmap_index_data::using_index field will be deleted in a future patch, when the rest of the DWARF psymtab code is removed. 2022-04-12 Tom Tromey Change parameters to write_address_map To support the removal of partial symtabs from the DWARF index writer, this makes a small change to have write_address_map accept the address map as a parameter, rather than assuming it always comes from the per-BFD object. Change the key type in psym_index_map In order to change the DWARF index writer to avoid partial symtabs, this patch changes the key type in psym_index_map (and renames that type as well). Using the dwarf2_per_cu_data as the key makes it simpler to reuse this code with the new indexer. Rename write_psymtabs_to_index We'll be removing all the psymtab code from the DWARF reader. As a preparatory step, this renames write_psymtabs_to_index to avoid the "psymtab" name. 2022-04-12 Tom Tromey "Finalize" the DWARF index in the background After scanning the CUs, the DWARF indexer merges all the data into a single vector, canonicalizing C++ names as it proceeds. While not necessarily single-threaded, this process is currently done in just one thread, to keep memory costs lower. However, this work is all done without reference to any data outside of the indexes. This patch improves the apparent performance of GDB by moving it to the background. All uses of the index are then made to wait for this process to complete. In our ongoing example, this reduces the scanning time on gdb itself to 0.173937 (wall). Recall that before this patch, the time was 0.668923; and psymbol reader does this in 1.598869. That is, at the end of this series, we see about a 10x speedup. 2022-04-12 Tom Tromey Parallelize DWARF indexing This parallelizes the new DWARF indexer. The indexer's storage was designed so that each storage object and each indexer is fully independent. This setup makes it simple to scan different CUs independently. This patch creates a new cooked index storage object per thread, and then scans a subset of all the CUs in each such thread, using gdb's existing thread pool. In the ongoing "gdb gdb" example, this patch reduces the wall time down to 0.668923, from 0.903534. (Note that the 0.903534 is the time for the new index -- that is, when the "enable the new index" patch is rebased to before this one. However, in the final series, that patch appears toward the end. Hopefully this isn't too confusing.) 2022-04-12 Tom Tromey Pre-read DWARF section data Because BFD is not thread-safe, we need to be sure that any section data that is needed is read before trying to do any DWARF indexing in the background. This patch takes a simple approach to this -- it pre-reads the "info"-related sections. This is done for the main file, but also any auxiliary files as well, such as the DWO file. This patch could be perhaps enhanced by removing some now-redundant calls to dwarf2_section_info::read. 2022-04-12 Tom Tromey Introduce thread-safe handling for complaints This introduces a new class that can be used to make the "complaint" code thread-safe. Instantiating the class installs a new handler that collects complaints, and then prints them all when the object is destroyed. This approach requires some locks. I couldn't think of a better way to handle this, though, because the I/O system is not thread-safe. It seemed to me that only GDB developers are likely to enable complaints, and because the complaint macro handle this case already (before any locks are required), I reasoned that any performance degradation that would result here would be fine. As an aside about complaints -- are they useful at all? I just ignore them, myself, since mostly they seem to indicate compiler problems that can't be solved in the GDB world anyway. I'd personally prefer them to be in a separate tool, like a hypothetical 'dwarflint'. 2022-04-12 Tom Tromey Wire in the new DWARF indexer This wires the new DWARF indexer into the existing reader code. That is, this patch makes the modification necessary to enable the new indexer. It is not actually enabled by this patch -- that will be done later. I did a bit of performance testing for this patch and a few others. I copied my built gdb to /tmp, so that each test would be done on the same executable. Then, each time, I did: $ ./gdb -nx (gdb) maint time 1 (gdb) file /tmp/gdb This patch is the baseline and on one machine came in at 1.598869 wall time. 2022-04-12 Tom Tromey Implement quick_symbol_functions for cooked DWARF index This implements quick_symbol_functions for the cooked DWARF index. This is the code that interfaces between the new index and the rest of gdb. Cooked indexes still aren't created by anything. For the most part this is straightforward. It shares some concepts with the existing DWARF indices. However, because names are stored pre-split in the cooked index, name lookup here is necessarily different; see expand_symtabs_matching for the gory details. 2022-04-12 Tom Tromey The new DWARF indexer This patch adds the code to index DWARF. This is just the scanner; it reads the DWARF and constructs the index, but nothing calls it yet. The indexer is split into two parts: a storage object and an indexer object. This is done to support the parallelization of this code -- a future patch will create a single storage object per thread. 2022-04-12 Tom Tromey Introduce the new DWARF index class This patch introduces the new DWARF index class. It is called "cooked" to contrast against a "raw" index, which is mapped from disk without extra effort. Nothing constructs a cooked index yet. The essential idea here is that index entries are created via the "add" method; then when all the entries have been read, they are "finalize"d -- name canonicalization is performed and the entries are added to a sorted vector. Entries use the DWARF name (DW_AT_name) or linkage name, not the full name as is done for partial symbols. These two facets -- the short name and the deferred canonicalization -- help improve the performance of this approach. This will become clear in later patches, when parallelization is added. Some special code is needed for Ada, because GNAT only emits mangled ("encoded", in the Ada lingo) names, and so we reconstruct the hierarchical structure after the fact. This is also done in the finalization phase. One other aspect worth noting is that the way the "main" function is found is different in the new code. Currently gdb will notice DW_AT_main_subprogram, but won't recognize "main" during reading -- this is done later, via explicit symbol lookup. This is done differently in the new code so that finalization can be done in the background without then requiring a synchronization to look up the symbol. 2022-04-12 Tom Tromey Update skip_one_die for new abbrev properties This updates skip_one_die to speed it up in the cases where either sibling_offset or size_if_constant are set. 2022-04-12 Tom Tromey Statically examine abbrev properties The new DIE scanner works more or less along the lines indicated by the text for the .debug_names section, disregarding the bugs in the specification. While working on this, I noticed that whether a DIE is interesting is a static property of the DIE's abbrev. It also turns out that many abbrevs imply a static size for the DIE data, and additionally that for many abbrevs, the sibling offset is stored at a constant offset from the start of the DIE. This patch changes the abbrev reader to analyze each abbrev and stash the results on the abbrev. These combine to speed up the new indexer. If the "interesting" flag is false, GDB knows to skip the DIE immediately. If the sibling offset is statically known, skipping can be done without reading any attributes; and in some other cases, the DIE can be skipped using simple arithmetic. 2022-04-12 Tom Tromey Introduce DWARF abbrev cache The replacement for the DWARF psymbol reader works in a somewhat different way. The current reader reads and stores all the DIEs that might be interesting. Then, if it is missing a DIE, it re-scans the CU and reads them all. This approach is used for both intra- and inter-CU references. I instrumented the partial DIE hash to see how frequently it was used: [ 0] -> 1538165 [ 1] -> 4912 [ 2] -> 96102 [ 3] -> 175 [ 4] -> 244 That is, most DIEs are never used, and some are looked up twice -- but this is just an artifact of the implementation of partial_die_info::fixup, which may do two lookups. Based on this, the new implementation doesn't try to store any DIEs, but instead just re-scans them on demand. In order to do this, though, it is convenient to have a cache of DWARF abbrevs. This way, if a second CU is needed to resolve an inter-CU reference, the abbrevs for that CU need only be computed a single time. 2022-04-12 Tom Tromey Add "fullname" handling to file_and_directory This changes the file_and_directory object to be able to compute and cache the "fullname" in the same way that is done by other code, like the psymtab reader. Specialize std::hash for gdb_exception This adds a std::hash specialization for gdb_exception. This lets us store these objects in a hash table, which is used later in this series to de-duplicate the exception output from multiple threads. Return vector of results from parallel_for_each This changes gdb::parallel_for_each to return a vector of the results. However, if the passed-in function returns void, the return type remains 'void'. This functionality is used later, to parallelize the new indexer. Add batching parameter to parallel_for_each parallel_for_each currently requires each thread to process at least 10 elements. However, when indexing, it's fine for a thread to handle just a single CU. This patch parameterizes this, and updates the one user. Refactor build_type_psymtabs_reader The new DWARF scanner needs to save the entire cutu_reader object, not just parts of it. In order to make this possible, this patch refactors build_type_psymtabs_reader. This change is done separately because it is easy to review in isolation and it helps make the later patches smaller. Add new overload of dwarf5_djb_hash This adds a new overload of dwarf5_djb_hash. This is used in subsequent patches. 2022-04-12 Tom Tromey Add name splitting The new DWARF index code works by keeping names pre-split. That is, rather than storing a symbol name like "a::b::c", the names "a", "b", and "c" will be stored separately. This patch introduces some helper code to split a full name into its components. 2022-04-12 Tom Tromey Let skip_one_die not skip children This patch adds an option to skip_one_die that causes it not to skip child DIEs. This is needed in the new scanner. Allow ada_decode not to decode operators The new DWARF scanner records names as they appear in DWARF. However, because Ada is unusual, it also decodes the Ada names to synthesize package components for them. In order for this to work out properly, gdb also needs a mode where ada_decode can be instructed not to decode Ada operator names. That is what this patch implements. Refactor dwarf2_get_pc_bounds This changes dwarf2_get_pc_bounds so that it does not directly access a psymtab or psymtabs_addrmap. Instead, both the addrmap and the desired payload are passed as parameters. This makes it suitable to be used by the new indexer. Add dwarf2_per_cu_data::addresses_seen This adds a new member to dwarf2_per_cu_data that indicates whether addresses have been seen for this CU. This is then set by the .debug_aranges reader. The idea here is to detect when a CU does not have address information, so that the new indexer will know to do extra scanning in that case. Fix latent bug in read_addrmap_from_aranges Tom de Vries found a failure that we tracked down to a latent bug in read_addrmap_from_aranges (previously create_addrmap_from_aranges). The bug is that this code can erroneously reject .debug_aranges when dwz is in use, due to CUs at duplicate offsets. Because aranges can't refer to a CU coming from the dwz file, the fix is to simply skip such CUs in the loop. Split create_addrmap_from_aranges This patch splits create_addrmap_from_aranges into a wrapper function and a worker function. The worker function is then used in a later patch. 2022-04-12 Tom Tromey Allow thread-pool.h to work without threads thread-pool.h requires CXX_STD_THREAD in order to even be included. However, there's no deep reason for this, and during review we found that one patch in the new DWARF indexer series unconditionally requires the thread pool. Because the thread pool already allows a task to be run in the calling thread (for example if it is configured to have no threads in the pool), it seemed straightforward to make this code ok to use when host threads aren't available at all. This patch implements this idea. I built it on a thread-less host (mingw, before my recent configure patch) and verified that the result builds. After the thread-pool change, parallel-for.h no longer needs any CXX_STD_THREAD checks at all, so this patch removes these as well. 2022-04-12 Nick Clifton Rebase the zlib sources to the 1.2.12 release 2022-04-12 Tom de Vries [gdb/testsuite] Fix gdb.base/stap-probe.exp with read1 When running test-case gdb.base/stap-probe.exp with make target check-read1, I run into this and similar: ... FAIL: gdb.base/stap-probe.exp: without semaphore, not optimized: \ info probes stap (timeout) ... Fix this by using gdb_test_lines instead of gdb_test. Tested on x86_64-linux. 2022-04-12 Tom Tromey Add C++ "save gdb-index" test I found a bug in the new DWARF reader series, related to the handling of enumerator names. This bug caused a crash, so this patch adds a regression test for this particular case. I'm checking this in. 2022-04-12 Tom Tromey Remove "Ada Settings" node from the manual A while back, I sent a patch to unify the Ada varsize-limit setting with the more generic max-value-size: https://sourceware.org/pipermail/gdb-patches/2021-September/182004.html However, it turns out I somehow neglected to send part of the patch. Internally, I also removed the "Ada Settings" node from the manual, as it only documents the obsolete setting. This patch removes this text. 2022-04-12 Tom Tromey Require GNAT debug info for some Ada tests A few Ada tests require some debug info in the GNAT runtime. When run without this info, these tests can't pass. This patch changes these tests to detect this situation and stop with "untested". 2022-04-12 Nick Clifton Stop strip from removing debuglink sections. PR 28992 * objcopy.c (is_strip_section_1): Do not delete debuglink sections when stripping debug information. 2022-04-12 Jan Beulich gas: new_logical_line{,_flags}() can return "void" With the sole user of the return value gone, convert the return type to void. This in turn allows simplifying another construct, by moving it slightly later in the function. gas: drop .appfile and .appline These were used originally to represent "# " constructs inserted by (typically) compilers when pre-processing. Quite some time ago they were replaced by .linefile though. Since the original directives were never documented, we ought to be able to remove support for them. As a result in a number of case function parameter aren't used anymore and can hence be dropped. 2022-04-12 Jan Beulich gas: further adjust file/line handling for .macro Commit 7992631e8c0b ("gas/Dwarf: improve debug info generation from .irp and alike blocks"), while dealing okay with actual assembly source files not using .file/.line and alike outside but not inside of .macro, has undue effects when the logical file/line pair was already overridden: Line numbers would continuously increment while processing the expanded macro, while the goal of the PR gas/16908 workaround is to keep the expansion associated with the line invoking the macro. However, as soon as enough state was overridden _inside_ the macro to cause as_where() to no longer fall back top as_where_physical(), honor this by resuming the bumping of the logical line number. Note that from_sb_is_expansion's initializer was 1 for an unknown reason. While renaming the variable and changing its type, also change the initializer to "expanding_none", which would have been "0" in the original code. Originally the initializer value itself wasn't ever used anyway (requiring sb_index != -1), as it necessarily had changed in input_scrub_include_sb() alongside setting sb_index to other than -1. Strictly speaking input_scrub_insert_line() perhaps shouldn't use expanding_none, yet none of the other enumerators fit there either. And then strictly speaking that function probably shouldn't exist in the first place. It's used only by tic54x. 2022-04-12 Jan Beulich gas: further adjust file/line handling for .irp and alike Commit 7992631e8c0b ("gas/Dwarf: improve debug info generation from .irp and alike blocks"), while dealing okay with actual assembly source files not using .file/.line and alike outside but not inside of .irp et al, has undue effects when the logical file/line pair was already overridden: Line numbers would continuously increment upon every iteration, thus potentially getting far off. Furthermore it left it to the user to actually insert .file/.line inside such constructs. Note though that before aforementioned change things weren't pretty either: Diagnostics (and debug info) would be associated with the directive terminating the iteration construct, rather than with the actual lines. Handle this automatically by simply latching the present line and then re-instating coordinates first thing on every iteration; note that the file can't change from what was previously pushed on the scrubber's state stack, and hence can be taken from there by using a new flavor of .linefile (which is far better memory-footprint-wise than recording the full path in the inserted directive). (This then leaves undisturbed any file/line control occurring in the body of the construct, as these will only be seen and processed afterwards.) 2022-04-12 Jan Beulich x86: make {disp16} work similarly to {disp32} In a few places {disp32} was handled specially when really {disp16} wants handling just the same. 2022-04-12 Vladimir Mezentsev gprofng doesn't build with gcc 5.5 gprofng/ChangeLog 2022-04-07 Vladimir Mezentsev PR gprofng/29026 * configure.ac: Check version of bison. * src/Makefile.am (QLParser.yy): Run bison * src/QLParser.yy: Adapted for bison 3.04 or later. * src/DbeSession.cc: make some params const. * src/DbeSession.h: Likewise. * configure: Regenerate. * Makefile.in: Regenerate. * src/Makefile.in: Regenerate. * src/QLParser.tab.cc: Deleted. * src/QLParser.tab.hh: Deleted. * doc/Makefile.in: Regenerate. * gp-display-html/Makefile.in: Regenerate. * libcollector/configure: Regenerate. 2022-04-12 GDB Administrator Automatic date update in version.in 2022-04-11 John Baldwin i386-fbsd-nat: Remove two unused variables. Earlier versions of the change in 1285ce8629b37f800bf21731ee7c7a8b1b8d0233 used this variable, but not the final version that landed. 2022-04-11 Simon Marchi gdb: remove MSYMBOL_TARGET_FLAG_{1,2} macros Replace with equivalent getter/setter macros. Change-Id: I1042564dd47347337374762bd64ec31b5c573ee2 2022-04-11 Simon Marchi gdb: remove minimal symbol size macros Remove MSYMBOL_HAS_SIZE, MSYMBOL_SIZE and SET_MSYMBOL_SIZE, replace them with equivalent methods. Change-Id: I6ee1cf82df37e58dff52ea6568ceb4649c7d7538 2022-04-11 Simon Marchi gdb: remove MSYMBOL_TYPE macro Add a getter and a setter for a minimal symbol's type. Remove the corresponding macro and adjust all callers. Change-Id: I89900df5ffa5687133fe1a16b2e0d4684e67a77d 2022-04-11 Simon Marchi gdb: remove symbol value macros Remove all macros related to getting and setting some symbol value: #define SYMBOL_VALUE(symbol) (symbol)->value.ivalue #define SYMBOL_VALUE_ADDRESS(symbol) \ #define SET_SYMBOL_VALUE_ADDRESS(symbol, new_value) \ #define SYMBOL_VALUE_BYTES(symbol) (symbol)->value.bytes #define SYMBOL_VALUE_COMMON_BLOCK(symbol) (symbol)->value.common_block #define SYMBOL_BLOCK_VALUE(symbol) (symbol)->value.block #define SYMBOL_VALUE_CHAIN(symbol) (symbol)->value.chain #define MSYMBOL_VALUE(symbol) (symbol)->value.ivalue #define MSYMBOL_VALUE_RAW_ADDRESS(symbol) ((symbol)->value.address + 0) #define MSYMBOL_VALUE_ADDRESS(objfile, symbol) \ #define BMSYMBOL_VALUE_ADDRESS(symbol) \ #define SET_MSYMBOL_VALUE_ADDRESS(symbol, new_value) \ #define MSYMBOL_VALUE_BYTES(symbol) (symbol)->value.bytes #define MSYMBOL_BLOCK_VALUE(symbol) (symbol)->value.block Replace them with equivalent methods on the appropriate objects. Change-Id: Iafdab3b8eefc6dc2fd895aa955bf64fafc59ed50 2022-04-11 Nils-Christian Kempke gdb/doc: add section about Fortran intrinsic functions and types The earlier version of this document had no sections about the available Fortran intrinsic functions or the Fortran builtin types. I added two sections 'Fortran intrinsics' and 'Fortran types' to document the available Fortran language features. The subsection 'Fortran Defaults' has been integrated into the Fortran subsection. 2022-04-11 Nils-Christian Kempke gdb/fortran/testsuite: add complex from integers test When working on the files I noted that there was no actual test for a COMPLEX built from two INTEGERS. I added that now for completion. 2022-04-11 Nils-Christian Kempke gdb/fortran: rewrite intrinsic handling and add some missing overloads The operators FLOOR, CEILING, CMPLX, LBOUND, UBOUND, and SIZE accept (some only with Fortran 2003) the optional parameter KIND. This parameter determines the kind of the associated return value. So far, implementation of this kind parameter has been missing in GDB. Additionally, the one argument overload for the CMPLX intrinsic function was not yet available. This patch adds overloads for all above mentioned functions to the Fortran intrinsics handling in GDB. It re-writes the intrinsic function handling section to use the helper methods wrap_unop_intrinsic/wrap_binop_intrinsic/wrap_triop_intrinsic. These methods define the action taken when a Fortran intrinsic function is called with a certain amount of arguments (1/2/3). The helper methods fortran_wrap2_kind and fortran_wrap3_kind have been added as equivalents to the existing wrap and wrap2 methods. After adding more overloads to the intrinsics handling, some of the operation names were no longer accurate. E.g. UNOP_FORTRAN_CEILING has been renamed to FORTRAN_CEILING as it is no longer a purely unary intrinsic function. This patch also introduces intrinsic functions with one, two, or three arguments to the Fortran parser and the UNOP_OR_BINOP_OR_TERNOP_INTRINSIC token has been added. 2022-04-11 Nils-Christian Kempke gdb/fortran: rename f77_keywords to f_keywords Rename f77_keywords to f_keywords since some of the introduced keywords in the array are f90 only. 2022-04-11 Nils-Christian Kempke gdb/fortran: Change GDB print for fortran default types Currently, when asking GDB to print the type of a Fortran default type such as INTEGER or REAL, GDB will return the default name of that type, e.g. "integer"/"real": (gdb) ptype integer type = integer (gdb) ptype real type = real For LOGICAL and COMPLEX it would return the actual underlying types (gdb) ptype logical type = logical*4 (gdb) ptype complex type = complex*4 Similarly, GDB would print the default integer type for the underlying default type: (gdb) ptype integer*4 type = integer (gdb) ptype real*4 type = real (gdb) ptype logical type = logical*4 (gdb) ptype complex*4 type = complex*4 This is inconsistent and a bit confusing. Both options somehow indicate what the internal underlying type for the default type is - but I think the logical/complex version is a bit clearer. Consider again: (gdb) ptype integer type = integer This indicates to a user that the type of "integer" is Fortran's default integer type. Without examining "ptype integer*4" I would expect, that any variable declared integer in the actual code would also fit into a GDB integer. But, since we cannot adapt out internal types to the compiler flags used at compile time of a debugged binary, this might be wrong. Consider debugging Fortran code compiled with GNU and e.g. the "-fdefault-integer-8" flag. In this case the gfortran default integer would be integer*8 while GDB internally still would use a builtin_integer, so an integer of the size of an integer*4 type. On the other hand having GDB print (gdb) ptype integer type = integer*4 makes this clearer. I would still be tempted to fit a variable declared integer in the code into a GDB integer - but at least ptype would directly tell me what is going on. Note, that when debugging a binary compiled with "-fdefault-integer-8" a user will always see the actual underlying type of any variable declared "integer" in the Fortran code. So having the code program test integer :: a = 5 print *, a ! breakpt end program test will, when breaking at breakpt print (gdb) ptype var type = integer(kind=4) or (gdb) ptype var type = integer(kind=8) depending on the compiler flag. This patch changes the outputs for the REAL and INTEGER default types to actually print the internally used type over the default type name. The new behavior for the above examples is: (gdb) ptype integer type = integer*4 (gdb) ptype integer*4 type = integer*4 Existing testcases have been adapted to reflect the new behavior. 2022-04-11 Nils-Christian Kempke gdb/fortran: clean-up Fortran intrinsic types The currently implemented intrinsic type handling for Fortran missed some tokens and their parsing. While still not all Fortran type kinds are implemented this patch at least makes the currently handled types consistent. As an example for what this patch does, consider the intrinsic type INTEGER. GDB implemented the handling of the keywords "integer" and "integer_2" but missed "integer_4" and "integer_8" even though their corresponding internal types were already available as the Fortran builtin types builtin_integer and builtin_integer_s8. Similar problems applied to LOGICAL, REAL, and COMPLEX. This patch adds all missing tokens and their parsing. Whenever a section containing the type handling was touched, it also was reordered to be in a more easy to grasp order. All INTEGER/REAL/LOGICAL/COMPLEX types were grouped together and ordered ascending in their size making a missing one more easy to spot. Before this change GDB would print the following when tyring to use the INTEGER keywords: (gdb) set language fortran (gdb) ptype integer*1 unsupported kind 1 for type integer (gdb) ptype integer_1 No symbol table is loaded. Use the "file" command. (gdb) ptype integer*2 type = integer*2 (gdb) ptype integer_2 type = integer*2 (gdb) ptype integer*4 type = integer (gdb) ptype integer_4 No symbol table is loaded. Use the "file" command. (gdb) ptype integer*8 type = integer*8 (gdb) ptype integer_8 No symbol table is loaded. Use the "file" command. (gdb) ptype integer type = integer With this patch all keywords are available and the GDB prints: (gdb) set language fortran (gdb) ptype integer*1 type = integer*1 (gdb) ptype integer_1 type = integer*1 (gdb) ptype integer*2 type = integer*2 (gdb) ptype integer_2 type = integer*2 (gdb) ptype integer*4 type = integer*4 (gdb) ptype integer_4 type = integer*4 (gdb) ptype integer*8 type = integer*8 (gdb) ptype integer_8 type = integer*8 (gdb) ptype integer type = integer The described changes have been applied to INTEGER, REAL, COMPLEX, and LOGICAL. Existing testcases have been adapted to reflect the new behavior. Tests for formerly missing types have been added. 2022-04-11 Nils-Christian Kempke gdb/fortran: change default logical type to builtin_logical According to the Fortran standard, logical is of the size of a 'single numeric storage unit' (just like real and integer). For gfortran, flang and ifx/ifort this storage unit (or the default logical type) is of size kind 4, actually occupying 4 bytes of storage, and so the default type for logical expressions in Fortran should probably also be Logical*4 and not Logical*2. I adapted GDB's behavior to be in line with gfortran/ifort/ifx/flang. gdb/fortran: reformat build_fortran_types in f-lang.c Add a few newlines after the type definitions and remove some unnecessary linebreaks. 2022-04-11 Nils-Christian Kempke gdb/fortran: fix complex type in Fortran builtin types Before this patch things like (gdb) ptype complex*8 complex*16 (gdb) ptype complex*4 complex*8 were possible in GDB, which seems confusing for a user. The reason is a mixup in the implementation of the Fortran COMPLEX type. In Fortran the "*X" after a type would normally (I don't think this is language required) specify the type's size in memory. For the COMPLEX type the kind parameters usually (at least for GNU, Intel, Flang) specify not the size of the whole type but the size of the individual two REALs used to form the COMPLEX. Thus, a COMPLEX*4 will usually consist of two REAL*4s. Internally this type was represented by a builtin_complex_s8 - but here I think the s8 actually meant the raw size of the type. This is confusing and I renamed the types (e.g. builting_complex_s8 became builtin_complex_s4 according to its most common useage) and their printed names to their language equivalent. Additionally, I added the default COMPLEX type "COMPLEX" being the same as a COMPLEX*4 (as is normally the case) and removed the latter. I added a few tests for this new behavior as well. The new behavior is (gdb) ptype complex*8 complex*8 (gdb) ptype complex*4 complex*4 2022-04-11 Nils-Christian Kempke gdb/f-lang: remove hidden ^L characters gdb/f-lang: add Integer*1 to Fortran builtin types Add builtin_integer_s1 of size TARGET_CHAR_BIT to Fortran builtin types. 2022-04-11 Tom de Vries [gdb/testsuite] Fix gdb.base/annota1.exp with pie Since commit 359efc2d894 ("[gdb/testsuite] Make gdb.base/annota1.exp more robust") we see this fail with target board unix/-fPIE/-pie: ... FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout) ... The problem is that the commit makes the number and order of matched annotations fixed, while between target boards unix and unix/-fPIE/-pie there is a difference: ... \032\032post-prompt Starting program: outputs/gdb.base/annota1/annota1 +\032\032breakpoints-invalid + \032\032starting \032\032frames-invalid ... Fix this by optionally matching the additional annotation. Tested on x86_64-linux. 2022-04-11 Tom de Vries [gdb/testsuite] Fix gdb.dwarf2/dw2-lines.exp for m32 pie As reported in PR29043, when running test-case gdb.dwarf2/dw2-lines.exp with target board unix/-m32/-fPIE/-pie, we run into: ... Breakpoint 2, 0x56555540 in bar ()^M (gdb) PASS: gdb.dwarf2/dw2-lines.exp: cv=2: cdw=32: lv=2: ldw=32: \ continue to breakpoint: foo \(1\) next^M Single stepping until exit from function bar,^M which has no line number information.^M 0x56555587 in main ()^M (gdb) FAIL: gdb.dwarf2/dw2-lines.exp: cv=2: cdw=32: lv=2: ldw=32: \ next to foo (2) ... The problem is that the bar breakpoint ends up at an unexpected location because: - the synthetic debug info is incomplete and doesn't provide line info for the prologue part of the function, so consequently gdb uses the i386 port prologue skipper to get past the prologue - the i386 port prologue skipper doesn't get past a get_pc_thunk call. Work around this in the test-case by breaking on bar_label instead. Tested on x86_64-linux with target boards unix, unix/-m32, unix/-fPIE/-pie and unix/-m32/-fPIE/-pie. 2022-04-11 GDB Administrator Automatic date update in version.in 2022-04-10 GDB Administrator Automatic date update in version.in 2022-04-09 Tom Tromey Remove MSYMBOL_VALUE_CHAIN I noticed that MSYMBOL_VALUE_CHAIN is unused, so this patch removes it. 2022-04-09 Alan Modra Rearrange struct bfd_section a little For better packing on 64-bit hosts. * section.c (struct bfd_section): Move next and prev field earlier. Move alignment_power later. (BFD_FAKE_SECTION): Adjust to suit. * bfd-in2.h: Regenerate. 2022-04-09 Alan Modra Don't run pr27228 test for hppa As the comment says, hppa doesn't support use of BFD_RELOC_* in .reloc directives. Using xfail can result in a spurious XPASS result as BFD_RELOC values change. * testsuite/gas/elf/pr27228.d: Change xfail to notarget for hppa. 2022-04-09 Alan Modra Correct nds32 readelf reloc numbers * readelf.c (is_32bit_abs_reloc, is_16bit_abs_reloc): Comment fixes. (is_none_reloc): Correct nds32 reloc numbers. 2022-04-09 GDB Administrator Automatic date update in version.in 2022-04-08 Fangrui Song gas: Port "copy st_size only if unset" to aarch64 and riscv And disable the new test gas/elf/size.s for alpha which uses its own .set, for hppa*-*-hpux* which does not allow .size before declaration. 2022-04-08 Vladimir Mezentsev gprofng: fprintf_styled_func not inizialized for disassembler gprofng/ChangeLog 2022-04-07 Vladimir Mezentsev * libcollector/unwind.c: inizialize fprintf_styled_func. * src/Disasm.cc: Likewise. 2022-04-08 Vladimir Mezentsev gprofng: zlib handling gprofng/ChangeLog 2022-04-06 Vladimir Mezentsev * configure.ac: Add AM_ZLIB. * src/Makefile.am: Add $(ZLIBINC) and $(ZLIB). * gprofng/src/DbeSession.h: Likewise. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * gp-display-html/Makefile.in: Regenerate. * src/Makefile.in: Regenerate. 2022-04-08 Pedro Alves gdb: Avoid undefined shifts, fix Go shifts I noticed that a build of GDB with GCC + --enable-ubsan, testing against GDBserver showed this GDB crash: (gdb) PASS: gdb.trace/trace-condition.exp: trace: 0x00abababcdcdcdcd << 46 == 0x7373400000000000: advance to trace begin tstart ../../src/gdb/valarith.c:1365:15: runtime error: left shift of 48320975398096333 by 46 places cannot be represented in type 'long int' ERROR: GDB process no longer exists GDB process exited with wait status 269549 exp9 0 1 UNRESOLVED: gdb.trace/trace-condition.exp: trace: 0x00abababcdcdcdcd << 46 == 0x7373400000000000: start trace experiment The problem is that, "0x00abababcdcdcdcd << 46" is an undefined signed left shift, because the result is not representable in the type of the lhs, which is signed. This actually became defined in C++20, and if you compile with "g++ -std=c++20 -Wall", you'll see that GCC no longer warns about it, while it warns if you specify prior language versions. While at it, there are a couple other situations that are undefined (and are still undefined in C++20) and result in GDB dying: shifting by a negative ammount, or by >= than the bit size of the promoted lhs. For the latter, GDB shifts using (U)LONGEST internally, so you have to shift by >= 64 bits to see it: $ gdb --batch -q -ex "p 1 << -1" ../../src/gdb/valarith.c:1365:15: runtime error: shift exponent -1 is negative $ # gdb exited $ gdb --batch -q -ex "p 1 << 64" ../../src/gdb/valarith.c:1365:15: runtime error: shift exponent 64 is too large for 64-bit type 'long int' $ # gdb exited Also, right shifting a negative value is implementation-defined (before C++20, after which it is defined). For this, I chose to change nothing in GDB other than adding tests, as I don't really know whether we need to do anything. AFAIK, most implementations do an arithmetic right shift, and it may be we don't support any host or target that behaves differently. Plus, this becomes defined in C++20 exactly as arithmetic right shift. Compilers don't error out on such shifts, at best they warn, so I think GDB should just continue doing the shifts anyhow too. Thus: - Adjust scalar_binop to avoid the undefined paths, either by adding explicit result paths, or by casting the lhs of the left shift to unsigned, as appropriate. For the shifts by a too-large count, I made the result be what you'd get if you split the large count in a series of smaller shifts. Thus: Left shift, positive or negative lhs: V << 64 => V << 16 << 16 << 16 << 16 => 0 Right shift, positive lhs: Vpos >> 64 => Vpos >> 16 >> 16 >> 16 >> 16 => 0 Right shift, negative lhs: Vneg >> 64 => Vneg >> 16 >> 16 >> 16 >> 16 => -1 This is actually Go's semantics (the compiler really emits instructions to make it so that you get 0 or -1 if you have a too-large shift). So for that language GDB does the shift and nothing else. For other C-like languages where such a shift is undefined, GDB warns in addition to performing the shift. For shift by a negative count, for Go, this is a hard error. For other languages, since their compilers only warn, I made GDB warn too. The semantics I chose (we're free to pick them since this is undefined behavior) is as-if you had shifted by the count cast to unsigned, thus as if you had shifted by a too-large count, thus the same as the previous scenario illustrated above. Examples: (gdb) set language go (gdb) p 1 << 100 $1 = 0 (gdb) p -1 << 100 $2 = 0 (gdb) p 1 >> 100 $3 = 0 (gdb) p -1 >> 100 $4 = -1 (gdb) p -2 >> 100 $5 = -1 (gdb) p 1 << -1 left shift count is negative (gdb) set language c (gdb) p -2 >> 100 warning: right shift count >= width of type $6 = -1 (gdb) p -2 << 100 warning: left shift count >= width of type $7 = 0 (gdb) p 1 << -1 warning: left shift count is negative $8 = 0 (gdb) p -1 >> -1 warning: right shift count is negative $9 = -1 - The warnings' texts are the same as what GCC prints. - Add comprehensive tests in a new gdb.base/bitshift.exp testcase, so that we exercise all these scenarios. Change-Id: I8bcd5fa02de3114b7ababc03e65702d86ec8d45d 2022-04-08 Pedro Alves Fix undefined behavior in the Fortran, Go and Pascal number parsers This commit ports these two fixes to the C parser: commit ebf13736b42af47c9907b5157c8e80c78dbe00e1 CommitDate: Thu Sep 4 21:46:28 2014 +0100 parse_number("0") reads uninitialized memory commit 20562150d8a894bc91657c843ee88c508188e32e CommitDate: Wed Oct 3 15:19:06 2018 -0600 Avoid undefined behavior in parse_number ... to the Fortran, Go, and Fortran number parsers, fixing the same problems there. Also add a new testcase that exercises printing 0xffffffffffffffff (max 64-bit) in all languages, which crashes a GDB built with UBsan without the fix. I moved get_set_option_choices out of all-architectures.exp.tcl to common code to be able to extract all the supported languages. I did a tweak to it to generalize it a bit -- you now have to pass down the "set" part of the command as well. This is so that the proc can be used with "maintenance set" commands as well in future. Change-Id: I8e8f2fdc1e8407f63d923c26fd55d98148b9e16a 2022-04-08 Nick Clifton Debug info for function in Windows PE binary on wrong instruction PR 29038 * coffgen.c (coff_find_nearest_line_with_names): Fix typo retrieving saved bias. 2022-04-08 Simon Marchi Pass PKG_CONFIG_PATH down from top-level Makefile [Sending to binutils, gdb-patches and gcc-patches, since it touches the top-level Makefile/configure] I have my debuginfod library installed in a non-standard location (/opt/debuginfod), which requires me to set PKG_CONFIG_PATH=/opt/debuginfod/lib/pkg-config. If I just set it during configure: $ PKG_CONFIG_PATH=/opt/debuginfod/lib/pkg-config ./configure --with-debuginfod $ make or $ ./configure --with-debuginfod PKG_CONFIG_PATH=/opt/debuginfod/lib/pkg-config $ make Then PKG_CONFIG_PATH is only present (and ignored) during the top-level configure. When running make (which runs gdb's and binutils' configure), PKG_CONFIG_PATH is not set, which results in their configure script not finding the library: checking for libdebuginfod >= 0.179... no configure: error: "--with-debuginfod was given, but libdebuginfod is missing or unusable." Change the top-level configure/Makefile system to capture the value passed when configuring the top-level and pass it down to subdirectories (similar to CFLAGS, LDFLAGS, etc). I don't know much about the top-level build system, so I really don't know if I did this correctly. The changes are: - Use AC_SUBST(PKG_CONFIG_PATH) in configure.ac, so that @PKG_CONFIG_PATH@ gets replaced with the actual PKG_CONFIG_PATH value in config files (i.e. Makefile) - Add a PKG_CONFIG_PATH Makefile variable in Makefile.tpl, initialized to @PKG_CONFIG_PATH@ - Add PKG_CONFIG_PATH to HOST_EXPORTS in Makefile.tpl, which are the variables set when running the sub-configures I initially added PKG_CONFIG_PATH to flags_to_pass, in Makefile.def, but I don't think it's needed. AFAIU, this defines the flags to pass down when calling "make" in subdirectories. We only need PKG_CONFIG_PATH to be passed down during configure. After that, it's captured in gdb/config.status, so even if a "make" causes a re-configure later (because gdb/configure has changed, for example), the PKG_CONFIG_PATH value will be remembered. ChangeLog: * configure.ac: Add AC_SUBST(PKG_CONFIG_PATH). * configure: Re-generate. * Makefile.tpl (HOST_EXPORTS): Pass PKG_CONFIG_PATH. (PKG_CONFIG_PATH): New. * Makefile.in: Re-generate. Change-Id: I91138dfca41c43b05e53e445f62e4b27882536bf 2022-04-08 Simon Marchi gdb/testsuite: use nopie in gdb.dwarf2/dw2-inline-param.exp I see this failure: (gdb) run ^M Starting program: /home/smarchi/build/binutils-gdb/gdb/testsuite/outputs/gdb.dwarf2/dw2-inline-param/dw2-inline-param ^M Warning:^M Cannot insert breakpoint 1.^M Cannot access memory at address 0x113b^M ^M (gdb) FAIL: gdb.dwarf2/dw2-inline-param.exp: runto: run to *0x113b The test loads the binary in GDB, grabs the address of a symbol, strips the binary, reloads it in GDB, runs the program, and then tries to place a breakpoint at that address. The problem is that the binary is built as position independent, so the address GDB grabs in the first place isn't where the code ends up after running. Fix this by linking the binary as non-position-independent. The alternative would be to compute the relocated address where to place the breakpoint, but that's not very straightforward, unfortunately. I was confused for a while, I was trying to load the binary in GDB manually to get the symbol address, but GDB was telling me the symbol could not be found. Meanwhile, it clearly worked in gdb.log. The thing is that GDB strips the binary in-place, so we don't have access to the intermediary binary with symbols. Change the test to output the stripped binary to a separate file instead. Change-Id: I66c56293df71b1ff49cf748d6784bd0e935211ba 2022-04-08 Alan Modra gdb maintainer commit rights Formalise what ought to be obvious. The top level of the binutils-gdb repository isn't owned by binutils. * MAINTAINERS: Spelling fix. GDB global maintainer rights. 2022-04-08 Bernhard Heckel Nils-Christian Kempke gdb/fortran: print fortran extended types with ptype Add the print of the base-class of an extended type to the output of ptype. This requires the Fortran compiler to emit DW_AT_inheritance for the extended type. 2022-04-08 Bernhard Heckel Nils-Christian Kempke gdb/fortran: add support for accessing fields of extended types Fortran 2003 supports type extension. This patch allows access to inherited members by using their fully qualified name as described in the Fortran standard. In doing so the patch also fixes a bug in GDB when trying to access the members of a base class in a derived class via the derived class' base class member. This patch fixes PR22497 and PR26373 on GDB side. Using the example Fortran program from PR22497 program mvce implicit none type :: my_type integer :: my_int end type my_type type, extends(my_type) :: extended_type end type extended_type type(my_type) :: foo type(extended_type) :: bar foo%my_int = 0 bar%my_int = 1 print*, foo, bar end program mvce and running this with GDB and setting a BP at 17: Before: (gdb) p bar%my_type A syntax error in expression, near `my_type'. (gdb) p bar%my_int There is no member named my_int. (gdb) p bar%my_type%my_int A syntax error in expression, near `my_type%my_int'. (gdb) p bar $1 = ( my_type = ( my_int = 1 ) ) After: (gdb) p bar%my_type $1 = ( my_int = 1 ) (gdb) p bar%my_int $2 = 1 # this line requires DW_TAG_inheritance to work (gdb) p bar%my_type%my_int $3 = 1 (gdb) p bar $4 = ( my_type = ( my_int = 1 ) ) In the above example "p bar%my_int" requires the compiler to emit information about the inheritance relationship between extended_type and my_type which gfortran and flang currently do not de. The respective issue gcc/49475 has been put as kfail. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26373 https://sourceware.org/bugzilla/show_bug.cgi?id=22497 2022-04-08 Nils-Christian Kempke gdb: add Nils-Christian Kempke to gdb/MAINTAINERS 2022-04-08 Simon Marchi gdb: change file_file_name to return an std::string Straightforward change, return an std::string instead of a gdb::unique_xmalloc_ptr. No behavior change expected. Change-Id: Ia5e94c94221c35f978bb1b7bdffbff7209e0520e 2022-04-08 GDB Administrator Automatic date update in version.in 2022-04-07 Andrew Burgess gdb/fortran: fix fetching assumed rank array content Commit: commit df7a7bdd9766adebc6b117c31bc617d81c1efd43 Date: Thu Mar 17 18:56:23 2022 +0000 gdb: add support for Fortran's ASSUMED RANK arrays Added support for Fortran assumed rank arrays. Unfortunately, this commit contained a bug that means though GDB can correctly calculate the rank of an assumed rank array, GDB can't fetch the contents of an assumed rank array. The history of this patch can be seen on the mailing list here: https://sourceware.org/pipermail/gdb-patches/2022-January/185306.html The patches that were finally committed can be found here: https://sourceware.org/pipermail/gdb-patches/2022-March/186906.html The original patches did support fetching the array contents, it was only the later series that introduced the regression. The problem is that when calculating the array rank the result is a count of the number of ranks, i.e. this is a 1 based result, 1, 2, 3, etc. In contrast, when computing the details of any particular rank the value passed to the DWARF expression evaluator should be a 0 based rank offset, i.e. a 0 based number, 0, 1, 2, etc. In the patches that were originally merged, this was not the case, and we were passing the 1 based rank number to the expression evaluator, e.g. passing 1 when we should pass 0, 2 when we should pass 1, etc. As a result the DWARF expression evaluator was reading the wrong (undefined) memory, and returning garbage results. In this commit I have extended the test case to cover checking the array contents, I've then ensured we make use of the correct rank value, and extended some comments, and added or adjusted some asserts as appropriate. 2022-04-07 Simon Marchi gdb/testsuite: add "macros" option to gdb_compile Make gdb_compile handle a new "macros" option, which makes it pass the appropriate flag to make the compiler include macro information in the debug info. This will help simplify tests using macros, reduce redundant code, and make it easier to add support for a new compiler. Right now it only handles clang specially (using -fdebug-macro) and falls back to -g3 otherwise (which works for gcc). Other compilers can be added as needed. There are some tests that are currently skipped if the compiler is nor gcc nor clang. After this patch, the tests will attempt to run (the -g3 fall back will be used). That gives a chance to people using other compilers to notice something is wrong and maybe add support for their compiler. If it is needed to support a compiler that doesn't have a way to include macro information, then we can always introduce a "skip_macro_tests" that can be used to skip over them. Change-Id: I50cd6ab1bfbb478c1005486408e214b551364c9b 2022-04-07 Simon Marchi gdb: remove subfile::buildsym_compunit field It is only set, never used. Change-Id: Ia46ed2f9da243b0ccfc4588c1b57be2a0f3939de 2022-04-07 Tom de Vries [gdb/testsuite] Make gdb.base/annota1.exp more robust On openSUSE Tumbleweed I run into: ... FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout) ... The problem is that the libthread_db message occurs at a location where it's not expected: ... Starting program: outputs/gdb.base/annota1/annota1 ^M ^M ^Z^Zstarting^M ^M ^Z^Zframes-invalid^M [Thread debugging using libthread_db enabled]^M Using host libthread_db library "/lib64/libthread_db.so.1".^M ^M ^Z^Zbreakpoints-invalid^M ^M ... Fix this by making the matching more robust: - rewrite the regexp such that each annotation is on a single line, starting with \r\n\032\032 and ending with \r\n - add a regexp variable optional_re, that matches all possible optional output, and use it as a separator in the first part of the regexp Tested on x86_64-linux. 2022-04-07 Simon Marchi gdb/testsuite/dwarf: simplify line number program syntax By calling `uplevel $body` in the program proc (a pattern we use at many places), we can get rid of curly braces around each line number program directive. That seems like a nice small improvement to me. Change-Id: Ib327edcbffbd4c23a08614adee56c12ea25ebc0b 2022-04-07 Simon Marchi gdb/testsuite/dwarf: remove two unused variables These variables seem to be unused, remove them. Change-Id: I7d613d9d35735930ee78b2c348943c73a702afbb 2022-04-07 Simon Marchi gdb: remove symtab::pspace Same idea as previous patch, but for symtab::pspace. Change-Id: I1023abe622bea75ef648c6a97a01b53775d4104d 2022-04-07 Simon Marchi gdb: remove symtab::objfile Same idea as previous patch, but for symtab::objfile. I find it clearer without this wrapper, as it shows that the objfile is common to all symtabs of a given compunit. Otherwise, you could think that each symtab (of a given compunit) can have a specific objfile. Change-Id: Ifc0dbc7ec31a06eefa2787c921196949d5a6fcc6 2022-04-07 Simon Marchi gdb: remove symtab::blockvector symtab::blockvector is a wrapper around compunit_symtab::blockvector. It is a bit misleadnig, as it gives the impression that a symtab has a blockvector. Remove it, change all users to fetch the blockvector through the compunit instead. Change-Id: Ibd062cd7926112a60d52899dff9224591cbdeebf 2022-04-07 Simon Marchi gdb: remove symtab::dirname I think the symtab::dirname method is bogus, or at least very misleading. It makes you think that it returns the directory that was used to find that symtab's file during compilation (i.e. the directory the file refers to in the DWARF line header file table), or the directory part of the symtab's filename maybe. In fact, it returns the compilation unit's directory, which is the CWD of the compiler, at compilation time. At least for DWARF, if the symtab's filename is relative, it will be relative to that directory. But if the symtab's filename is absolute, then the directory returned by symtab::dirname has nothing to do with the symtab's filename. Remove symtab::dirname to avoid this confusion, change all users to fetch the same information through the compunit. At least, it will be clear that this is a compunit property, not a symtab property. Change-Id: I2894c3bf3789d7359a676db3c58be2c10763f5f0 2022-04-07 Simon Marchi gdb/testsuite: make gdb_breakpoint and runto take a linespec Change gdb_breakpoint to accept a linespec, not just a function. In fact, no behavior changes are necessary, this only changes the parameter name and documentation. Change runto as well, since the two are so close (runto forwards all its arguments to gdb_breakpoint). I wrote this for a downstrean GDB port, but thought it could be useful upstream, eventually, even though not callers take advantage of it yet. Change-Id: I08175fd444d5a60df90fd9985e1b5dfd87c027cc 2022-04-07 Andrew Burgess gdb: update comments throughout reggroups.{c,h} files This commit updates the comments in the gdb/reggroups.{c,h} files. Fill in some missing comments, correct a few comments that were not clear, and where we had comments duplicated between .c and .h files, update the .c to reference the .h. No user visible changes after this commit. 2022-04-07 Andrew Burgess gdb: move struct reggroup into reggroups.h header Move 'struct reggroup' into the reggroups.h header. Remove the reggroup_name and reggroup_type accessor functions, and just use the name/type member functions within 'struct reggroup', update all uses of these removed functions. There should be no user visible changes after this commit. 2022-04-07 Andrew Burgess gdb: convert reggroup to a C++ class with constructor, etc Convert the 'struct reggroup' into a real class, with a constructor and getter methods. There should be no user visible changes after this commit. 2022-04-07 Andrew Burgess gdb: make the pre-defined register groups const Convert the 7 global, pre-defined, register groups const, and fix the fall out (a minor tweak required in riscv-tdep.c). There should be no user visible changes after this commit. 2022-04-07 Andrew Burgess gdb: more 'const' in gdb/reggroups.{c,h} Convert the reggroup_new and reggroup_gdbarch_new functions to return a 'const regggroup *', and fix up all the fallout. There should be no user visible changes after this commit. 2022-04-07 Andrew Burgess gdb: remove reggroup_next and reggroup_prev Add a new function gdbarch_reggroups that returns a reference to a vector containing all the reggroups for an architecture. Make use of this function throughout GDB instead of the existing reggroup_next and reggroup_prev functions. Finally, delete the reggroup_next and reggroup_prev functions. Most of these changes are pretty straight forward, using range based for loops instead of the old style look using reggroup_next. There are two places where the changes are less straight forward. In gdb/python/py-registers.c, the register group iterator needed to change slightly. As the iterator is tightly coupled to the gdbarch, I just fetch the register group vector from the gdbarch when needed, and use an index counter to find the next item from the vector when needed. In gdb/tui/tui-regs.c the tui_reg_next and tui_reg_prev functions are just wrappers around reggroup_next and reggroup_prev respectively. I've just inlined the logic of the old functions into the tui functions. As the tui function had its own special twist (wrap around behaviour) I think this is OK. There should be no user visible changes after this commit. 2022-04-07 Andrew Burgess gdb: convert reggroups to use a std::vector Replace manual linked list with a std::vector. This commit doesn't change the reggroup_next and reggroup_prev API, but that will change in a later commit. This commit is focused on the minimal changes needed to manage the reggroups using a std::vector, without changing the API exposed by the reggroup.c file. There should be no user visible changes after this commit. 2022-04-07 Andrew Burgess gdb: always add the default register groups There's a set of 7 default register groups. If we don't add any gdbarch specific register groups during gdbarch initialisation, then when we iterate over the register groups using reggroup_next and reggroup_prev we will make use of these 7 default groups. See the use of default_groups in gdb/reggroups.c for details on this. However, if the gdbarch adds its own groups during gdbarch initialisation, then these groups will be used in preference to the default groups. A problem arises though if the particular architecture makes use of the target description mechanism. If the default target description(s) (i.e. those internal to GDB that are used when the user doesn't provide their own) don't mention any additional register groups then the default register groups will be used. But if the target description does mention additional groups then the default groups are not used, and instead, the groups from the target description are used. The problem with this is that what usually happens is that the target description will mention additional groups, e.g. groups for special registers. Most architectures that use target descriptions work around this by adding all (or most) of the default register groups in all cases. See i386_add_reggroups, aarch64_add_reggroups, riscv_add_reggroups, xtensa_add_reggroups, and others. In this patch, my suggestion is that we should just add the default register groups for every architecture, always. This change is in gdb/reggroups.c. All the remaining changes are me updating the various architectures to not add the default groups themselves. So, where will this change be visible to the user? I think the following commands will possibly change: * info registers / info all-registers: The user can provide a register group to these commands. For example, on csky, we previously never added the 'vector' group. Now, as a default group, this will be available, but (presumably) will not contain any registers. I don't think this is necessarily a bad thing, there's something to be said for having some consistent defaults available. There are other architectures that didn't add all 7 of the defaults, which will now have gained additional groups. * maint print reggroups This prints the set of all available groups. As a maintenance command I'm less concerned with the output changing here. Obviously, for the architectures that didn't previously add all the defaults, this list just got bigger. * maint print register-groups This prints all the registers, and the groups they are in. If the defaults were not previously being added then a register (obviously) can't appear in one of the default groups. Now the groups are available then registers might be in more groups than previously. However, this is again a maintenance command, so I'm less concerned about this changing. 2022-04-07 Andrew Burgess gdb/tui: fix 'tui reg next/prev' command when data window is hidden Start GDB like: $ gdb -q executable (gdb) start (gdb) layout src ... tui windows are now displayed ... (gdb) tui reg next At this point the data (register) window should be displayed, but will contain the message 'Register Values Unavailable', and at the console you'll see the message "unknown register group 'next'". The same happens with 'tui reg prev' (but the error message is slightly different). At this point you can continue to use 'tui reg next' and/or 'tui reg prev' and you'll keep getting the error message. The problem is that when the data (register) window is first displayed, it's current register group is nullptr. As a consequence tui_reg_next and tui_reg_prev (tui/tui-regs.c) will always just return nullptr, which triggers an error in tui_reg_command. In this commit I change tui_reg_next and tui_reg_prev so that they instead return the first and last register group respectively if the current register group is nullptr. So, after this, using 'tui reg next' will (in the above case) show the first register group, while 'tui reg prev' will display the last register group. 2022-04-07 Andrew Burgess gdb/tui: avoid theoretical bug with 'tui reg' command While looking at the 'tui reg' command as part of another patch, I spotted a theoretical bug. The 'tui reg' command takes the name of a register group, but also handles partial register group matches, though the partial match has to be unique. The current command logic goes: With the code as currently written, if a target description named a register group either 'prev' or 'next' then GDB would see this as an ambiguous register name, and refuse to switch groups. Naming a register group 'prev' or 'next' seems pretty unlikely, but, by adding a single else block we can prevent this problem. Now, if there's a 'prev' or 'next' register group, the user will not be able to select the group directly, the 'prev' and 'next' names will always iterate through the available groups instead. But at least the user could select their groups by iteration, rather than direct selection. 2022-04-07 Andrew Burgess gdb: have reggroup_find return a const Update reggroup_find to return a const reggroup *. There are other function in gdb/reggroup.{c,h} files that could benefit from returning const, these will be updated in later commits. There should be no user visible changes after this commit. 2022-04-07 Andrew Burgess gdb: use 'const reggroup *' in python/py-registers.c file Convert uses of 'struct reggroup *' in python/py-registers.c to be 'const'. There should be no user visible changes after this commit. 2022-04-07 Andrew Burgess gdb: switch to using 'const reggroup *' in tui-regs.{c,h} Make uses of 'reggroup *' const throughout tui-regs.{c,h}. There should be no user visible changes after this commit. 2022-04-07 Andrew Burgess gdb: make gdbarch_register_reggroup_p take a const reggroup * Change gdbarch_register_reggroup_p to take a 'const struct reggroup *' argument. This requires a change to the gdb/gdbarch-components.py script, regeneration of gdbarch.{c,h}, and then updates to all the architectures that implement this method. There should be no user visible changes after this commit. 2022-04-07 Andrew Burgess gdb: add some const in gdb/reggroups.c This commit makes the 'struct reggroup *' argument const for the following functions: reggroup_next reggroup_prev reggroup_name reggroup_type There are other places that could benefit from const in the reggroup.{c,h} files, but these will be changing in further commits. There should be no user visible changes after this commit. 2022-04-07 Andrew Burgess gdb: don't try to use readline before it's initialized While working on a different patch, I triggered an assertion from the initialize_current_architecture code, specifically from one of the *_gdbarch_init functions in a *-tdep.c file. This exposes a couple of issues with GDB. This is easy enough to reproduce by adding 'gdb_assert (false)' into a suitable function. For example, I added a line into i386_gdbarch_init and can see the following issue. I start GDB and immediately hit the assert, the output is as you'd expect, except for the very last line: $ ./gdb/gdb --data-directory ./gdb/data-directory/ ../../src.dev-1/gdb/i386-tdep.c:8455: internal-error: i386_gdbarch_init: Assertion `false' failed. A problem internal to GDB has been detected, further debugging may prove unreliable. ----- Backtrace ----- ... snip ... --------------------- ../../src.dev-1/gdb/i386-tdep.c:8455: internal-error: i386_gdbarch_init: Assertion `false' failed. A problem internal to GDB has been detected, further debugging may prove unreliable. Quit this debugging session? (y or n) ../../src.dev-1/gdb/ser-event.c:212:16: runtime error: member access within null pointer of type 'struct serial' Something goes wrong when we try to query the user. Note, I configured GDB with --enable-ubsan, I suspect that without this the above "error" would actually just be a crash. The backtrace from ser-event.c:212 looks like this: (gdb) bt 10 #0 serial_event_clear (event=0x675c020) at ../../src/gdb/ser-event.c:212 #1 0x0000000000769456 in invoke_async_signal_handlers () at ../../src/gdb/async-event.c:211 #2 0x000000000295049b in gdb_do_one_event () at ../../src/gdbsupport/event-loop.cc:194 #3 0x0000000001f015f8 in gdb_readline_wrapper ( prompt=0x67135c0 "../../src/gdb/i386-tdep.c:8455: internal-error: i386_gdbarch_init: Assertion `false' failed.\nA problem internal to GDB has been detected,\nfurther debugging may prove unreliable.\nQuit this debugg"...) at ../../src/gdb/top.c:1141 #4 0x0000000002118b64 in defaulted_query(const char *, char, typedef __va_list_tag __va_list_tag *) ( ctlstr=0x2e4eb68 "%s\nQuit this debugging session? ", defchar=0 '\000', args=0x7fffffffa6e0) at ../../src/gdb/utils.c:934 #5 0x0000000002118f72 in query (ctlstr=0x2e4eb68 "%s\nQuit this debugging session? ") at ../../src/gdb/utils.c:1026 #6 0x00000000021170f6 in internal_vproblem(internal_problem *, const char *, int, const char *, typedef __va_list_tag __va_list_tag *) (problem=0x6107bc0 , file=0x2b976c8 "../../src/gdb/i386-tdep.c", line=8455, fmt=0x2b96d7f "%s: Assertion `%s' failed.", ap=0x7fffffffa8e8) at ../../src/gdb/utils.c:417 #7 0x00000000021175a0 in internal_verror (file=0x2b976c8 "../../src/gdb/i386-tdep.c", line=8455, fmt=0x2b96d7f "%s: Assertion `%s' failed.", ap=0x7fffffffa8e8) at ../../src/gdb/utils.c:485 #8 0x00000000029503b3 in internal_error (file=0x2b976c8 "../../src/gdb/i386-tdep.c", line=8455, fmt=0x2b96d7f "%s: Assertion `%s' failed.") at ../../src/gdbsupport/errors.cc:55 #9 0x000000000122d5b6 in i386_gdbarch_init (info=..., arches=0x0) at ../../src/gdb/i386-tdep.c:8455 (More stack frames follow...) It turns out that the problem is that the async event handler mechanism has been invoked, but this has not yet been initialized. If we look at gdb_init (in gdb/top.c) we can indeed see the call to gdb_init_signals is after the call to initialize_current_architecture. If I reorder the calls, moving gdb_init_signals earlier, then the initial error is resolved, however, things are still broken. I now see the same "Quit this debugging session? (y or n)" prompt, but when I provide an answer and press return GDB immediately crashes. So what's going on now? The next problem is that the call_readline field within the current_ui structure is not initialized, and this callback is invoked to process the reply I entered. The problem is that call_readline is setup as a result of calling set_top_level_interpreter, which is called from captured_main_1. Unfortunately, set_top_level_interpreter is called after gdb_init is called. I wondered how to solve this problem for a while, however, I don't know if there's an easy "just reorder some lines" solution here. Looking through captured_main_1 there seems to be a bunch of dependencies between printing various things, parsing config files, and setting up the interpreter. I'm sure there is a solution hiding in there somewhere.... I'm just not sure I want to spend any longer looking for it. So. I propose a simpler solution, more of a hack/work-around. In utils.c we already have a function filtered_printing_initialized, this is checked in a few places within internal_vproblem. In some of these cases the call gates whether or not GDB will query the user. My proposal is to add a new readline_initialized function, which checks if the current_ui has had readline initialized yet. If this is not the case then we should not attempt to query the user. After this change GDB prints the error message, the backtrace, and then aborts (including dumping core). This actually seems pretty sane as, if GDB has not yet made it through the initialization then it doesn't make much sense to allow the user to say "no, I don't want to quit the debug session" (I think). 2022-04-07 Luis Machado Recognize the NT_ARM_SYSTEM_CALL register set Update binutils to recognize the NT_ARM_SYSTEM_CALL set that is dumped by Linux to core files. 2022-04-07 Mark Harmstone Add support for COFF secidx relocations bfd * coff-i386.c (in_reloc_p): Add R_SECTION. (howto_table): Add R_SECTION. (coff_pe_i386_relocation_section): Add support for R_SECTION. (coff_i386_reloc_type_lookup): Add support for BFD_RELOC_16_SECCIDX. * coff-x86_64.c (in_reloc_p): Add R_SECTION. (howto_table): Add R_SECTION. (coff_pe_amd64_relocation_section): Add support for R_SECTION. (coff_amd64_reloc_type_lookup): Add support for BFD_RELOC_16_SECCIDX. * reloc.c: Add BFD_RELOC_16_SECIDX. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas * config/tc-i386.c (pe_directive_secidx): New function. (md_pseudo_table): Add support for secidx. (x86_cons_fix_new): Likewise. (tc_gen_reloc): Likewise. * expr.c (op_rank): Add O_secidx. * expr.h (operatorT): Likewise. * symbols.c (resolve_symbol_value): Add support for O_secidx. * testsuite/gas/i386/secidx.s: New test source file. * testsuite/gas/i386/secidx.d: New test driver file. * testsuite/gas/i386/i386.exp: Run new test. include * coff/i386.h: Define R_SECTION. * coff/x86_64.h: Likewise. ld * testsuite/ld-pe/secidx1.s: New test source file. * testsuite/ld-pe/secidx2.s: New test source file. * testsuite/ld-pe/secidx.d: New test driver file. * testsuite/ld-pe/secidx_64.d: New test driver file. * testsuite/ld-pe/pe.exp: Add new tests. 2022-04-07 Jan Beulich gas/Dwarf: record functions To help tools like addr2line looking up function names, in particular when dealing with e.g. PE/COFF binaries (linked from ELF objects), where there's no ELF symbol table to fall back to, emit minimalistic information for functions marked as such and having their size specified. Notes regarding the restriction to (pure) ELF: - I realize this is a layering violation; I don't see how to deal with that in a better way. - S_GET_SIZE(), when OBJ_MAYBE_ELF is defined, looks wrong: Unlike S_SET_SIZE() it does not check whether the hook is NULL. - symbol_get_obj(), when OBJ_MAYBE_ELF is defined, looks unusable, as its return type can only ever be one object format's type (and this may then not be ELF's). The new testcases are limited to x86 because I wanted to include the case where function size can't be determined yet at the time Dwarf2 info is generated. As .nops gains support by further targets, they could also be added here then (with, as necessary, expecations suitably relaxed to cover for insn size differences). 2022-04-07 Jan Beulich Arm64: arrange for line number emission for .inst Just like insns encoded the more conventional way these should have line number info associated with them. Arm32: arrange for line number emission for .inst Just like insns encoded the more conventional way these should have line number info associated with them. RISC-V: add testcase to check line number emission for .insn Since no such test looks to exist, derive one from insn.s. 2022-04-07 Andreas Krebbel IBM zSystems: Add support for z16 as CPU name. So far z16 was identified as arch14. After the machine has been announced we can now add the real name. gas/ChangeLog: * config/tc-s390.c (s390_parse_cpu): Add z16 as alternate CPU name. * doc/as.texi: Add z16 and arch14 to CPU string list. * doc/c-s390.texi: Add z16 to CPU string list. opcodes/ChangeLog: * s390-mkopc.c (main): Enable z16 as CPU string in the opcode table. 2022-04-07 GDB Administrator Automatic date update in version.in 2022-04-06 Youling Tang gdb: mips: Fix the handling of complex type of function return value $ objdump -d outputs/gdb.base/varargs/varargs 00000001200012e8 : ... 1200013b8: c7c10000 lwc1 $f1,0(s8) 1200013bc: c7c00004 lwc1 $f0,4(s8) 1200013c0: 46000886 mov.s $f2,$f1 1200013c4: 46000046 mov.s $f1,$f0 1200013c8: 46001006 mov.s $f0,$f2 1200013cc: 46000886 mov.s $f2,$f1 1200013d0: 03c0e825 move sp,s8 1200013d4: dfbe0038 ld s8,56(sp) 1200013d8: 67bd0080 daddiu sp,sp,128 1200013dc: 03e00008 jr ra 1200013e0: 00000000 nop From the above disassembly, we can see that when the return value of the function is a complex type and len <= 2 * MIPS64_REGSIZE, the return value will be passed through $f0 and $f2, so fix the corresponding processing in mips_n32n64_return_value(). $ make check RUNTESTFLAGS='GDB=../gdb gdb.base/varargs.exp --outdir=test' Before applying the patch: FAIL: gdb.base/varargs.exp: print find_max_float_real(4, fc1, fc2, fc3, fc4) FAIL: gdb.base/varargs.exp: print find_max_double_real(4, dc1, dc2, dc3, dc4) # of expected passes 9 # of unexpected failures 2 After applying the patch: # of expected passes 11 This also fixes: FAIL: gdb.base/callfuncs.exp: call inferior func with struct - returns float _Complex Co-Authored-By: Maciej W. Rozycki 2022-04-06 Tom Tromey Use new and delete in jit.c This changes jit.c to use new and delete, rather than XCNEW. This simplifies the code a little. This was useful for another patch I'm working on, and I thought it would make sense to send it separately. Regression tested on x86-64 Fedora 34. 2022-04-06 Simon Marchi gdb: don't copy entirely optimized out values in value_copy Bug 28980 shows that trying to value_copy an entirely optimized out value causes an internal error. The original bug report involves MI and some Python pretty printer, and is quite difficult to reproduce, but another easy way to reproduce (that is believed to be equivalent) was proposed: $ ./gdb -q -nx --data-directory=data-directory -ex "py print(gdb.Value(gdb.Value(5).type.optimized_out()))" /home/smarchi/src/binutils-gdb/gdb/value.c:1731: internal-error: value_copy: Assertion `arg->contents != nullptr' failed. This is caused by 5f8ab46bc691 ("gdb: constify parameter of value_copy"). It added an assertion that the contents buffer is allocated if the value is not lazy: if (!value_lazy (val)) { gdb_assert (arg->contents != nullptr); This was based on the comment on value::contents, which suggest that this is the case: /* Actual contents of the value. Target byte-order. NULL or not valid if lazy is nonzero. */ gdb::unique_xmalloc_ptr contents; However, it turns out that it can also be nullptr also if the value is entirely optimized out, for example on exit of allocate_optimized_out_value. That function creates a lazy value, marks the entire value as optimized out, and then clears the lazy flag. But contents remains nullptr. This wasn't a problem for value_copy before, because it was calling value_contents_all_raw on the input value, which caused contents to be allocated before doing the copy. This means that the input value to value_copy did not have its contents allocated on entry, but had it allocated on exit. The result value had it allocated on exit. And that we copied bytes for an entirely optimized out value (i.e. meaningless bytes). From here I see two choices: 1. respect the documented invariant that contents is nullptr only and only if the value is lazy, which means making allocate_optimized_out_value allocate contents 2. extend the cases where contents can be nullptr to also include values that are entirely optimized out (note that you could still have some entirely optimized out values that do have contents allocated, it depends on how they were created) and adjust value_copy accordingly Choice #1 is safe, but less efficient: it's not very useful to allocate a buffer for an entirely optimized out value. It's even a bit less efficient than what we had initially, because values coming out of allocate_optimized_out_value would now always get their contents allocated. Choice #2 would be more efficient than what we had before: giving an optimized out value without allocated contents to value_copy would result in an optimized out value without allocated contents (and the input value would still be without allocated contents on exit). But it's more risky, since it's difficult to ensure that all users of the contents (through the various_contents* accessors) are all fine with that new invariant. In this patch, I opt for choice #2, since I think it is a better direction than choice #1. #1 would be a pessimization, and if we go this way, I doubt that it will ever be revisited, it will just stay that way forever. Add a selftest to test this. I initially started to write it as a Python test (since the reproducer is in Python), but a selftest is more straightforward. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28980 Change-Id: I6e2f5c0ea804fafa041fcc4345d47064b5900ed7 2022-04-06 Jeff Law Fix for v850e divq instruction This is the last of the correctness fixes I've been carrying around for the v850. Like the other recent fixes, this is another case where we haven't been as careful as we should WRT host vs target types. For the divq instruction both operands are 32 bit types. Yet in the simulator code we convert them from unsigned int to signed long by assignment. So 0xfffffffb (aka -5) turns into 4294967291 and naturally that changes the result of our division. The fix is simple, insert a cast to int32_t to force interpretation as a signed value. Testcase for the simulator is included. It has a trivial dependency on the bins patch. 2022-04-06 Jeff Law Fix "bins" simulation for v850e3v5 I've been carrying this for a few years. One test in the GCC testsuite is failing due to a bug in the handling of the v850e3v5 instruction "bins". When the "bins" instruction specifies a 32bit bitfield size, the simulator exhibits undefined behavior by trying to shift a 32 bit quantity by 32 bits. In the case of a 32 bit shift, we know what the resultant mask should be. So we can just set it. That seemed better than using 1UL for the constant (on a 32bit host unsigned long might still just be 32 bits) or needlessly forcing everything to long long types. Thankfully the case where this shows up is only bins , 0, 32, which would normally be encoded as a simple move. * testsuite/v850/allinsns.exp: Add v850e3v5. * testsuite/v850/bins.cgs: New test. * v850/simops.c (v850_bins): Avoid undefined behavior on left shift. 2022-04-06 Tiezhu Yang gdb: LoongArch: prepend tramp frame unwinder for signal Implement the "init" method of struct tramp_frame to prepend tramp frame unwinder for signal on LoongArch. With this patch, the following failed testcases can be fixed: FAIL: gdb.base/annota1.exp: backtrace @ signal handler (timeout) FAIL: gdb.base/annota3.exp: backtrace @ signal handler (pattern 2) 2022-04-06 Andrew Burgess gdb: make interp_add static Since this commit: commit 8322445e0584be846f5873b9aab257dc9fbda05d Date: Tue Jun 21 01:11:45 2016 +0100 Introduce interpreter factories Interpreters should be registered with GDB, not by calling interp_add, but with a call to interp_factory_register. I've checked the insight source, and it too has moved over to using interp_factory_register. In this commit I make interp_add static within interps.c. There should be no user visible change after this commit. 2022-04-06 Nick Clifton Add code to display the contents of .debug_loclists sections which contain offset entry tables. PR 28981 * dwarf.c (fetch_indexed_value): Rename to fecth_indexed_addr and return the address, rather than a string. (fetch_indexed_value): New function - returns a value indexed by a DW_FORM_loclistx or DW_FORM_rnglistx form. (read_and_display_attr_value): Add support for DW_FORM_loclistx and DW_FORM_rnglistx. (process_debug_info): Load the loclists and rnglists sections. (display_loclists_list): Add support for DW_LLE_base_addressx, DW_LLE_startx_endx, DW_LLE_startx_length and DW_LLE_default_location. (display_offset_entry_loclists): New function. Displays a .debug_loclists section that contains offset entry tables. (display_debug_loc): Call the new function. (display_debug_rnglists_list): Add support for DW_RLE_base_addressx, DW_RLE_startx_endx and DW_RLE_startx_length. (display_debug_ranges): Display the contents of the section's header. * dwarf.h (struct debug_info): Add loclists_base field. * testsuite/binutils-all/dw5.W: Update expected output. * testsuite/binutils-all/x86-64/pr26808.dump: Likewise. 2022-04-06 Luis Machado Enable ARMv8.1-m PACBTI support This set of changes enable support for the ARMv8.1-m PACBTI extensions [1]. The goal of the PACBTI extensions is similar in scope to that of a-profile PAC/BTI (aarch64 only), but the underlying implementation is different. One important difference is that the pointer authentication code is stored in a separate register, thus we don't need to mask/unmask the return address from a function in order to produce a correct backtrace. The patch introduces the following modifications: - Extend the prologue analyser for 32-bit ARM to handle some instructions from ARMv8.1-m PACBTI: pac, aut, pacg, autg and bti. Also keep track of return address signing/authentication instructions. - Adds code to identify object file attributes that indicate the presence of ARMv8.1-m PACBTI (Tag_PAC_extension, Tag_BTI_extension, Tag_PACRET_use and Tag_BTI_use). - Adds support for DWARF pseudo-register RA_AUTH_CODE, as described in the aadwarf32 [2]. - Extends the dwarf unwinder to track the value of RA_AUTH_CODE. - Decorates backtraces with the "[PAC]" identifier when a frame has signed the return address. - Makes GDB aware of a new XML feature "org.gnu.gdb.arm.m-profile-pacbti". This feature is not included as an XML file on GDB's side because it is only supported for bare metal targets. - Additional documentation. [1] https://community.arm.com/arm-community-blogs/b/architectures-and-processors-blog/posts/armv8-1-m-pointer-authentication-and-branch-target-identification-extension [2] https://github.com/ARM-software/abi-aa/blob/main/aadwarf32/aadwarf32.rst 2022-04-06 Andrew Burgess gdb: move gdb_disassembly_flag into a new disasm-flags.h file While working on the disassembler I was getting frustrated. Every time I touched disasm.h it seemed like every file in GDB would need to be rebuilt. Surely the disassembler can't be required by that many parts of GDB, right? Turns out that disasm.h is included in target.h, so pretty much every file was being rebuilt! The only thing from disasm.h that target.h needed is the gdb_disassembly_flag enum, as this is part of the target_ops api. In this commit I move gdb_disassembly_flag into its own file. This is then included in target.h and disasm.h, after which, the number of files that depend on disasm.h is much reduced. I also audited all the other includes of disasm.h and found that the includes in mep-tdep.c and python/py-registers.c are no longer needed, so I've removed these. Now, after changing disasm.h, GDB rebuilds much quicker. There should be no user visible changes after this commit. 2022-04-06 GDB Administrator Automatic date update in version.in 2022-04-05 Tom Tromey Introduce wrapped_file Simon pointed out that timestamped_file probably needed to implement a few more methods. This patch introduces a new file-wrapping file that forwards most of its calls, making it simpler to implement new such files. It also converts timestamped_file and pager_file to use it. Regression tested on x86-64 Fedora 34. 2022-04-05 Tom Tromey Don't call init_thread_list in windows-nat.c I don't think there's any need to call init_thread_list in windows-nat.c. This patch removes it. I tested this using the internal AdaCore test suite on Windows, which FWIW does include some multi-threaded inferiors. 2022-04-05 Simon Marchi gdb/testsuite: fix intermittent failure in gdb.base/vfork-follow-parent.exp Tom de Vries reported some failures in this test: continue Continuing. [New inferior 2 (process 14967)] Thread 1.1 "vfork-follow-pa" hit Breakpoint 2, break_parent () at /home/vries/gdb_versions/devel/src/gdb/testsuite/gdb.base/vfork-follow-parent.c:23 23 } (gdb) FAIL: gdb.base/vfork-follow-parent.exp: resolution_method=schedule-multiple: continue to end of inferior 2 inferior 1 [Switching to inferior 1 [process 14961] (/home/vries/gdb_versions/devel/build/gdb/testsuite/outputs/gdb.base/vfork-follow-parent/vfork-follow-parent)] [Switching to thread 1.1 (process 14961)] #0 break_parent () at /home/vries/gdb_versions/devel/src/gdb/testsuite/gdb.base/vfork-follow-parent.c:23 23 } (gdb) PASS: gdb.base/vfork-follow-parent.exp: resolution_method=schedule-multiple: inferior 1 continue Continuing. [Inferior 2 (process 14967) exited normally] (gdb) FAIL: gdb.base/vfork-follow-parent.exp: resolution_method=schedule-multiple: continue to break_parent (the program exited) Here, we continue both the vfork parent and child, since schedule-multiple is on. The child exits, which un-freezes the parent and makes an exit event available to GDB. We expect GDB to consume this exit event and present it to the user. Here, we see that GDB shows the parent hitting a breakpoint before showing the child exit. Because of the vfork, we know that chronologically, the child exiting must have happend before the parent hitting a breakpoint. However, scheduling being what it is, it is possible for the parent to un-freeze and exit quickly, such that when GDB pulls events out of the kernel, exit events for both processes are available. And then, GDB may chose at random to return the one for the parent first. This is what I imagine what causes the failure shown above. We could change the test to expect both possible outcomes, but I wanted to avoid complicating the .exp file that way. Instead, add a variable that the parent loops on that we set only after we confirmed the exit of the child. That should ensure that the order is always the same. Note that I wasn't able to reproduce the failure, so I can't tell if this fix really fixes the problem. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29021 Change-Id: Ibc8e527e0e00dac54b22021fe4d9d8ab0f3b28ad 2022-04-05 Simon Marchi gdb/testsuite: fix intermittent failures in gdb.mi/mi-cmd-user-context.exp I got failures like this once on a CI: frame^M &"frame\n"^M ~"#0 child_sub_function () at /home/jenkins/workspace/binutils-gdb_master_build/arch/amd64/target_board/unix/src/binutils-gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c:33\n"^M ~"33\t dummy = !dummy; /* thread loop line */\n"^M ^done^M (gdb) ^M FAIL: gdb.mi/mi-cmd-user-context.exp: frame 1 (unexpected output) The problem is that the test expects the following regexp: ".*#0 0x.*" And that typically works, when the output of the frame command looks like: #0 0x00005555555551bb in child_sub_function () at ... Note the lack of hexadecimal address in the failing case. Whether or not the hexadecimal address is printed (roughly) depends on whether the current PC is at the beginning of a line. So depending on where thread 2 was when GDB stopped it (after thread 1 hit its breakpoint), we can get either output. Adjust the regexps to not expect an hexadecimal prefix (0x) but a function name instead (either child_sub_function or child_function). That one is always printed, and is also a good check that we are in the frame we expect. Note that for test "frame 5", we are showing a pthread frame (on my system), so the function name is internal to pthread, not something we can rely on. In that case, it's almost certain that we are not at the beginning of a line, or that we don't have debug info, so I think it's fine to expect the hex prefix. And for test "frame 6", it's ok to _not_ expect a hex prefix (what the test currently does), since we are showing thread 1, which has hit a breakpoint placed at the beginning of a line. When testing this, Tom de Vries pointed out that the current test code doesn't ensure that the child threads are in child_sub_function when they are stopped. If the scheduler chooses so, it is possible for the child threads to be still in the pthread_barrier_wait or child_function functions when they get stopped. So that would be another racy failure waiting to happen. The only way I can think of to ensure the child threads are in the child_sub_function function when they get stopped is to synchronize the threads using some variables instead of pthread_barrier_wait. So, replace the barrier with an array of flags (one per child thread). Each child thread flips its flag in child_sub_function to allow the main thread to make progress and eventually hit the breakpoint. I copied user-selected-context-sync.c to a new mi-cmd-user-context.c and made modifications to that, to avoid interfering with user-selected-context-sync.exp. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29025 Change-Id: I919673bbf9927158beb0e8b7e9e980b8d65eca90 2022-04-05 Luis Machado Fix qRcmd error code parsing Someone at IRC spotted a bug in qRcmd handling. This looks like an oversight or it is that way for historical reasons. The code in gdb/remote.c:remote_target::rcmd uses isdigit instead of isxdigit. One could argue that we are expecting decimal numbers, but further below we use fromhex (). Update the function to use isxdigit instead and also update the documentation. I see there are lots of other cases of undocumented number format for error messages, mostly described as NN instead of nn. For now I'll just update this particular function. 2022-04-05 Simon Marchi gdb: resume ongoing step after handling fork or vfork The test introduced by this patch would fail in this configuration, with the native-gdbserver or native-extended-gdbserver boards: FAIL: gdb.threads/next-fork-other-thread.exp: fork_func=fork: target-non-stop=auto: non-stop=off: displaced-stepping=auto: i=2: next to for loop The problem is that the step operation is forgotten when handling the fork/vfork. With "debug infrun" and "debug remote", it looks like this (some lines omitted for brevity). We do the next: [infrun] proceed: enter [infrun] proceed: addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT [infrun] resume_1: step=1, signal=GDB_SIGNAL_0, trap_expected=0, current thread [4154304.4154304.0] at 0x5555555553bf [infrun] do_target_resume: resume_ptid=4154304.0.0, step=1, sig=GDB_SIGNAL_0 [remote] Sending packet: $vCont;r5555555553bf,5555555553c4:p3f63c0.3f63c0;c:p3f63c0.-1#cd [infrun] proceed: exit We then handle a fork event: [infrun] fetch_inferior_event: enter [remote] wait: enter [remote] Packet received: T05fork:p3f63ee.3f63ee;06:0100000000000000;07:b08e59f6ff7f0000;10:bf60e8f7ff7f0000;thread:p3f63c0.3f63c6;core:17; [remote] wait: exit [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) = [infrun] print_target_wait_results: 4154304.4154310.0 [Thread 4154304.4154310], [infrun] print_target_wait_results: status->kind = FORKED, child_ptid = 4154350.4154350.0 [infrun] handle_inferior_event: status->kind = FORKED, child_ptid = 4154350.4154350.0 [remote] Sending packet: $D;3f63ee#4b [infrun] resume_1: step=0, signal=GDB_SIGNAL_0, trap_expected=0, current thread [4154304.4154310.0] at 0x7ffff7e860bf [infrun] do_target_resume: resume_ptid=4154304.0.0, step=0, sig=GDB_SIGNAL_0 [remote] Sending packet: $vCont;c:p3f63c0.-1#73 [infrun] fetch_inferior_event: exit In the first snippet, we resume the stepping thread with the range-stepping (r) vCont command. But after handling the fork (detaching the fork child), we resumed the whole process freely. The stepping thread, which was paused by GDBserver while reporting the fork event, was therefore resumed freely, instead of confined to the addresses of the stepped line. Note that since this is a "next", it could be that we have entered a function, installed a step-resume breakpoint, and it's ok to continue freely the stepping thread, but that's not the case here. The two snippets shown above were next to each other in the logs. For the fork case, we can resume stepping right after handling the event. However, for the vfork case, where we are waiting for the external child process to exec or exit, we only resume the thread that called vfork, and keep the others stopped (see patch "gdb: fix handling of vfork by multi-threaded program" prior in this series). So we can't resume the stepping thread right now. Instead, do it after handling the vfork-done event. Change-Id: I92539c970397ce880110e039fe92b87480f816bd 2022-04-05 Simon Marchi gdb/remote: remove_new_fork_children don't access target_waitstatus::child_ptid if kind == TARGET_WAITKIND_THREAD_EXITED Following the previous patch, running gdb.threads/forking-threads-plus-breakpoints.exp continuously eventually gives me an internal error. gdb/target/waitstatus.h:372: internal-error: child_ptid: Assertion `m_kind == TARGET_WAITKIND_FORKED || m_kind == TARGET_WAITKIND_VFORKED' failed.^M FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: displaced=off: inferior 1 exited (GDB internal error) The backtrace is: 0x55925b679c85 internal_error(char const*, int, char const*, ...) /home/simark/src/binutils-gdb/gdbsupport/errors.cc:55 0x559258deadd2 target_waitstatus::child_ptid() const /home/simark/src/binutils-gdb/gdb/target/waitstatus.h:372 0x55925a7cbac9 remote_target::remove_new_fork_children(threads_listing_context*) /home/simark/src/binutils-gdb/gdb/remote.c:7311 0x55925a79dfdb remote_target::update_thread_list() /home/simark/src/binutils-gdb/gdb/remote.c:3981 0x55925ad79b83 target_update_thread_list() /home/simark/src/binutils-gdb/gdb/target.c:3793 0x55925addbb15 update_thread_list() /home/simark/src/binutils-gdb/gdb/thread.c:2031 0x559259d64838 stop_all_threads(char const*, inferior*) /home/simark/src/binutils-gdb/gdb/infrun.c:5104 0x559259d88b45 keep_going_pass_signal /home/simark/src/binutils-gdb/gdb/infrun.c:8215 0x559259d8951b keep_going /home/simark/src/binutils-gdb/gdb/infrun.c:8251 0x559259d78835 process_event_stop_test /home/simark/src/binutils-gdb/gdb/infrun.c:6858 0x559259d750e9 handle_signal_stop /home/simark/src/binutils-gdb/gdb/infrun.c:6580 0x559259d6c07b handle_inferior_event /home/simark/src/binutils-gdb/gdb/infrun.c:5832 0x559259d57db8 fetch_inferior_event() /home/simark/src/binutils-gdb/gdb/infrun.c:4222 Indeed, the code accesses target_waitstatus::child_ptid when the kind is TARGET_WAITKIND_THREAD_EXITED, which is not right. A TARGET_WAITKIND_THREAD_EXITED event does not have a child_ptid value associated, it has an exit status, which we are not interested in. The intent is to remove from the thread list the thread that has exited. Its ptid is found in the stop reply event, get it from there. Change-Id: Icb298cbb80b8779fdf0c660dde9a5314d5591535 2022-04-05 Simon Marchi gdbserver: report correct status in thread stop race condition The test introduced by the following patch would sometimes fail in this configuration: FAIL: gdb.threads/next-fork-other-thread.exp: fork_func=vfork: target-non-stop=on: non-stop=off: displaced-stepping=auto: i=14: next to for loop The test has multiple threads constantly forking or vforking while the main thread keep doing "next"s. (After writing the commit message, I realized this also fixes a similar failure in gdb.threads/forking-threads-plus-breakpoint.exp with the native-gdbserver and native-extended-gdbserver boards.) As stop_all_threads is called, because the main thread finished its "next", it inevitably happens at some point that we ask the remote target to stop a thread and wait() reports that this thread stopped with a fork or vfork event, instead of the SIGSTOP we sent to try to stop it. While running this test, I attached to GDBserver and stopped at linux-low.cc:3626. We can see that the status pulled from the kernel for 2742805 is indeed a vfork event: (gdb) p/x w $3 = 0x2057f (gdb) p WIFSTOPPED(w) $4 = true (gdb) p WSTOPSIG(w) $5 = 5 (gdb) p/x (w >> 8) & (PTRACE_EVENT_VFORK << 8) $6 = 0x200 However, the statement at line 3626 overrides that: ourstatus->set_stopped (gdb_signal_from_host (WSTOPSIG (w))); OURSTATUS becomes "stopped by a SIGTRAP". The information about the fork or vfork is lost. It's then all downhill from there, stop_all_threads eventually asks for a thread list update. That thread list includes the child of that forgotten fork or vfork, the remote target goes "oh cool, a new process, let's attach to it!", when in fact that vfork child's destiny was to be detached. My reverse-engineered understanding of the code around there is that the if/else between lines 3562 and 3583 (in the original code) makes sure OURSTATUS is always initialized (not "ignore"). Either the details are already in event_child->waitstatus (in the case of fork/vfork, for example), in which case we just copy event_child->waitstatus to ourstatus. Or, if the event is a plain "stopped by a signal" or a syscall event, OURSTATUS is set to "stopped", but without a signal number. Lines 3601 to 3629 (in the original code) serve to fill in that last bit of information. The problem is that when `w` holds the vfork status, the code wrongfully takes this branch, because WSTOPSIG(w) returns SIGTRAP: else if (current_thread->last_resume_kind == resume_stop && WSTOPSIG (w) != SIGSTOP) The intent of this branch is, for example, when we sent SIGSTOP to try to stop a thread, but wait() reports that it stopped with another signal (that it must have received from somewhere else simultaneously), say SIGWINCH. In that case, we want to report the SIGWINCH. But in our fork/vfork case, we don't want to take this branch, as the thread didn't really stop because it received a signal. For the non "stopped by a signal" and non "syscall signal" cases, we would ideally skip over all that snippet that fills in the signal or syscall number. The fix I propose is to move this snipppet of the else branch of the if/else above. In addition to moving the code, the last two "else if" branches: else if (current_thread->last_resume_kind == resume_stop && WSTOPSIG (w) != SIGSTOP) { /* A thread that has been requested to stop by GDB with vCont;t, but, it stopped for other reasons. */ ourstatus->set_stopped (gdb_signal_from_host (WSTOPSIG (w))); } else if (ourstatus->kind () == TARGET_WAITKIND_STOPPED) ourstatus->set_stopped (gdb_signal_from_host (WSTOPSIG (w))); are changed into a single else: else ourstatus->set_stopped (gdb_signal_from_host (WSTOPSIG (w))); This is the default path we take if: - W is not a syscall status - W does not represent a SIGSTOP that have sent to stop the thread and therefore want to suppress it Change-Id: If2dc1f0537a549c293f7fa3c53efd00e3e194e79 2022-04-05 Simon Marchi gdb: fix handling of vfork by multi-threaded program (follow-fork-mode=parent, detach-on-fork=on) There is a problem with how GDB handles a vfork happening in a multi-threaded program. This problem was reported to me by somebody not using vfork directly, but using system(3) in a multi-threaded program, which may be implemented using vfork. This patch only deals about the follow-fork-mode=parent, detach-on-fork=on case, because it would be too much to chew at once to fix the bugs in the other cases as well (I tried). The problem ----------- When a program vforks, the parent thread is suspended by the kernel until the child process exits or execs. Specifically, in a multi-threaded program, only the thread that called vfork is suspended, other threads keep running freely. This is documented in the vfork(2) man page ("Caveats" section). Let's suppose GDB is handling a vfork and the user's desire is to detach from the child. Before detaching the child, GDB must remove the software breakpoints inserted in the shared parent/child address space, in case there's a breakpoint in the path the child is going to take before exec'ing or exit'ing (unlikely, but possible). Otherwise the child could hit a breakpoint instruction while running outside the control of GDB, which would make it crash. GDB must also avoid re-inserting breakpoints in the parent as long as it didn't receive the "vfork done" event (that is, when the child has exited or execed): since the address space is shared with the child, that would re-insert breakpoints in the child process also. So what GDB does is: 1. Receive "vfork" event for the parent 2. Remove breakpoints from the (shared) address space and set program_space::breakpoints_not_allowed to avoid re-inserting them 3. Detach from the child thread 4. Resume the parent 5. Wait for and receive "vfork done" event for the parent 6. Clean program_space::breakpoints_not_allowed and re-insert breakpoints 7. Resume the parent Resuming the parent at step 4 is necessary in order for the kernel to report the "vfork done" event. The kernel won't report a ptrace event for a thread that is ptrace-stopped. But the theory behind this is that between steps 4 and 5, the parent won't actually do any progress even though it is ptrace-resumed, because the kernel keeps it suspended, waiting for the child to exec or exit. So it doesn't matter for that thread if breakpoints are not inserted. The problem is when the program is multi-threaded. In step 4, GDB resumes all threads of the parent. The thread that did the vfork stays suspended by the kernel, so that's fine. But other threads are running freely while breakpoints are removed, which is a problem because they could miss a breakpoint that they should have hit. The problem is present with all-stop and non-stop targets. The only difference is that with an all-stop targets, the other threads are stopped by the target when it reports the vfork event and are resumed by the target when GDB resumes the parent. With a non-stop target, the other threads are simply never stopped. The fix ------- There many combinations of settings to consider (all-stop/non-stop, target-non-stop on/off, follow-fork-mode parent/child, detach-on-fork on/off, schedule-multiple on/off), but for this patch I restrict the scope to follow-fork-mode=parent, detach-on-fork=on. That's the "default" case, where we detach the child and keep debugging the parent. I tried to fix them all, but it's just too much to do at once. The code paths and behaviors for when we don't detach the child are completely different. The guiding principle for this patch is that all threads of the vforking inferior should be stopped as long as breakpoints are removed. This is similar to handling in-line step-overs, in a way. For non-stop targets (the default on Linux native), this is what happens: - In follow_fork, we call stop_all_threads to stop all threads of the inferior - In follow_fork_inferior, we record the vfork parent thread in inferior::thread_waiting_for_vfork_done - Back in handle_inferior_event, we call keep_going, which resumes only the event thread (this is already the case, with a non-stop target). This is the thread that will be waiting for vfork-done. - When we get the vfork-done event, we go in the (new) handle_vfork_done function to restart the previously stopped threads. In the same scenario, but with an all-stop target: - In follow_fork, no need to stop all threads of the inferior, the target has stopped all threads of all its inferiors before returning the event. - In follow_fork_inferior, we record the vfork parent thread in inferior::thread_waiting_for_vfork_done. - Back in handle_inferior_event, we also call keep_going. However, we only want to resume the event thread here, not all inferior threads. In internal_resume_ptid (called by resume_1), we therefore now check whether one of the inferiors we are about to resume has thread_waiting_for_vfork_done set. If so, we only resume that thread. Note that when resuming multiple inferiors, one vforking and one not non-vforking, we could resume the vforking thread from the vforking inferior plus all threads from the non-vforking inferior. However, this is not implemented, it would require more work. - When we get the vfork-done event, the existing call to keep_going naturally resumes all threads. Testing-wise, add a test that tries to make the main thread hit a breakpoint while a secondary thread calls vfork. Without the fix, the main thread keeps going while breakpoints are removed, resulting in a missed breakpoint and the program exiting. Change-Id: I20eb78e17ca91f93c19c2b89a7e12c382ee814a1 2022-04-05 Simon Marchi gdb/infrun: add logging statement to do_target_resume This helped me, it shows which ptid we actually call target_resume with. Change-Id: I2dfd771e83df8c25f39371a13e3e91dc7882b73d 2022-04-05 Simon Marchi gdb/infrun: add inferior parameters to stop_all_threads and restart_threads A following patch will want to stop all threads of a given inferior (as opposed to all threads of all inferiors) while handling a vfork, and restart them after. To help with this, add inferior parameters to stop_all_threads and restart_threads. This is done as a separate patch to make sure this doesn't cause regressions on its own, and to keep the following patches more concise. No visible changes are expected here, since all calls sites pass nullptr, which should keep the existing behavior. Change-Id: I4d9ba886ce842042075b4e346cfa64bbe2580dbf 2022-04-05 Simon Marchi gdb: replace inferior::waiting_for_vfork_done with inferior::thread_waiting_for_vfork_done The inferior::waiting_for_vfork_done flag indicates that some thread in that inferior is waiting for a vfork-done event. Subsequent patches will need to know which thread precisely is waiting for that event. Replace the boolean flag (waiting_for_vfork_done) with a thread_info pointer (thread_waiting_for_vfork_done). I think there is a latent buglet in that waiting_for_vfork_done is currently not reset on inferior exec or exit. I could imagine that if a thread in the parent process calls exec or exit while another thread of the parent process is waiting for its vfork child to exec or exit, we could end up with inferior::waiting_for_vfork_done without a thread actually waiting for a vfork-done event anymore. And since that flag is checked in resume_1, things could misbehave there. Since the new field points to a thread_info object, and those are destroyed on exec or exit, it could be worse now since we could try to access freed memory, if thread_waiting_for_vfork_done were to point to a stale thread_info. To avoid this, clear the field in infrun_inferior_exit and infrun_inferior_execd. Change-Id: I31b847278613a49ba03fc4915f74d9ceb228fdce 2022-04-05 Simon Marchi gdb: make timestamped_file implement write_async_safe Trying to use "set debug linux-nat 1", I get an internal error: /home/smarchi/src/binutils-gdb/gdb/ui-file.h:70: internal-error: write_async_safe: write_async_safe The problem is that timestamped_file doesn't implement write_async_safe, which linux-nat's sigchld_handler uses. Implement it. Change-Id: I830981010c6119f13ae673605ed015cced0f5ee8 2022-04-05 GDB Administrator Automatic date update in version.in 2022-04-04 Andrew Burgess gdb/testsuite: fix timeout in server-pipe.exp test I noticed that the gdb.server/server-pipe.exp test would sometimes timeout when my machine was more heavily loaded. Turns out the test is reading all the shared libraries over GDB's remote protocol, which can be slow. We avoid this in other tests by setting the sysroot in GDBFLAGS, something which is missing from the gdb.server/server-pipe.exp test. Fix the timeouts by setting sysroot in GDBFLAGS, after this the shared libraries are no longer copied over the remote protocol, and I no longer see the test timeout. 2022-04-04 John Baldwin Handle TLS variable lookups when using separate debug files. Commit df22c1e5d53c38f38bce6072bb46de240f9e0e2b handled the case that a separate debug file was passed as the objfile for a shared library to svr4_fetch_objfile_link_map. However, a separate debug file can also be passed for TLS variables in the main executable. In addition, frv_fetch_objfile_link_map also expects to be passed the original objfile rather than a separate debug file, so pull the code to resolve a separate debug file to the main objfile up into target_translate_tls_address. 2022-04-04 Lancelot SIX gdb: Add maint set ignore-prologue-end-flag The previous patch added support for the DWARF prologue-end flag in line table. This flag can be used by DWARF producers to indicate where to place breakpoints past a function prologue. However, this takes precedence over prologue analyzers. So if we have to debug a program with erroneous debug information, the overall debugging experience will be degraded. This commit proposes to add a maintenance command to instruct GDB to ignore the prologue_end flag. Tested on x86_64-gnu-linux. Change-Id: Idda6d1b96ba887f4af555b43d9923261b9cc6f82 2022-04-04 Lancelot SIX gdb: Add support for DW_LNS_set_prologue_end in line-table Add support for DW_LNS_set_prologue_end when building line-tables. This attribute can be set by the compiler to indicate that an instruction is an adequate place to set a breakpoint just after the prologue of a function. The compiler might set multiple prologue_end, but considering how current skip_prologue_using_sal works, this commit modifies it to accept the first instruction with this marker (if any) to be the place where a breakpoint should be placed to be at the end of the prologue. The need for this support came from a problematic usecase generated by hipcc (i.e. clang). The problem is as follows: There's a function (lets call it foo) which covers PC from 0xa800 to 0xa950. The body of foo begins with a call to an inlined function, covering from 0xa800 to 0xa94c. The issue is that when placing a breakpoint at 'foo', GDB inserts the breakpoint at 0xa818. The 0x18 offset is what GDB thinks is foo's first address past the prologue. Later, when hitting the breakpoint, GDB reports the stop within the inlined function because the PC falls in its range while the user expects to stop in FOO. Looking at the line-table for this location, we have: INDEX LINE ADDRESS IS-STMT [...] 14 293 0x000000000000a66c Y 15 END 0x000000000000a6e0 Y 16 287 0x000000000000a800 Y 17 END 0x000000000000a818 Y 18 287 0x000000000000a824 Y [...] For comparison, let's look at llvm-dwarfdump's output for this CU: Address Line Column File ISA Discriminator Flags ------------------ ------ ------ ------ --- ------------- ------------- [...] 0x000000000000a66c 293 12 2 0 0 is_stmt 0x000000000000a6e0 96 43 82 0 0 is_stmt 0x000000000000a6f8 102 18 82 0 0 is_stmt 0x000000000000a70c 102 24 82 0 0 0x000000000000a710 102 18 82 0 0 0x000000000000a72c 101 16 82 0 0 is_stmt 0x000000000000a73c 2915 50 83 0 0 is_stmt 0x000000000000a74c 110 1 1 0 0 is_stmt 0x000000000000a750 110 1 1 0 0 is_stmt end_sequence 0x000000000000a800 107 0 1 0 0 is_stmt 0x000000000000a800 287 12 2 0 0 is_stmt prologue_end 0x000000000000a818 114 59 81 0 0 is_stmt 0x000000000000a824 287 12 2 0 0 is_stmt 0x000000000000a828 100 58 82 0 0 is_stmt [...] The main difference we are interested in here is that llvm-dwarfdump's output tells us that 0xa800 is an adequate place to place a breakpoint past a function prologue. Since we know that foo covers from 0xa800 to 0xa94c, 0xa800 is the address at which the breakpoint should be placed if the user wants to break in foo. This commit proposes to add support for the prologue_end flag in the line-program processing. The processing of this prologue_end flag is made in skip_prologue_sal, before it calls gdbarch_skip_prologue_noexcept. The intent is that if the compiler gave information on where the prologue ends, we should use this information and not try to rely on architecture dependent logic to guess it. The testsuite have been executed using this patch on GNU/Linux x86_64. Testcases have been compiled with both gcc/g++ (verison 9.4.0) and clang/clang++ (version 10.0.0) since at the time of writing GCC does not set the prologue_end marker. Tests done with GCC 11.2.0 (not over the entire testsuite) show that it does not emit this flag either. No regression have been observed with GCC or Clang. Note that when using Clang, this patch fixes a failure in gdb.opt/inline-small-func.exp. Change-Id: I720449a8a9b2e1fb45b54c6095d3b1e9da9152f8 2022-04-04 Lancelot SIX gdb/buildsym: Line record use a record flag Currently when recording a line entry (with buildsym_compunit::record_line), a boolean argument argument is used to indicate that the is_stmt flag should be set for this particular record. As a later commit will add support for new flags, instead of adding a parameter to record_line for each possible flag, transform the current is_stmt parameter into a enum flag. This flags parameter will allow greater flexibility in future commits. This enum flags type is not propagated into the linetable_entry type as this would require a lot of changes across the codebase for no practical gain (it currently uses a bitfield where each interesting flag only occupy 1 bit in the structure). Tested on x86_64-linux, no regression observed. Change-Id: I5d061fa67bdb34918742505ff983d37453839d6a 2022-04-04 Simon Marchi gdb: make timestamped_file implement can_emit_style_escape In our AMDGPU downstream port, we use styling in some logging output. We noticed it stopped working after the gdb_printf changes. Making timestamped_file implement can_emit_style_escape (returning the value of the stream it wraps) fixes it. To show that it works, modify some logging statements in auto-load.c to output style filenames. You can see it in action by setting "set debug auto-load 1" and running a program. We can incrementally add styling to other debug statements throughout GDB, as needed. Change-Id: I78a2fd1e078f80f2263251cf6bc53b3a9de9c17a 2022-04-04 Simon Marchi gdb: remove assertion in psymbol_functions::expand_symtabs_matching psymtab_to_symtab is documented as possibly returning nullptr, if the primary symtab of the partial symtab has no symbols. However, psymbol_functions::expand_symtabs_matching asserts that the result of psymtab_to_symtab as non-nullptr. I caught this assert by trying the CTF symbol reader on a library I built with -gctf: $ ./gdb --data-directory=data-directory /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0 ... Reading symbols from /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0... (gdb) maintenance expand-symtabs /home/simark/src/binutils-gdb/gdb/psymtab.c:1142: internal-error: expand_symtabs_matching: Assertion `symtab != nullptr' failed. The "symtab" in question is: $ readelf --ctf=.ctf /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0 ... CTF archive member: /home/simark/src/babeltrace/src/lib/graph/component-descriptor-set.c: Header: Magic number: 0xdff2 Version: 4 (CTF_VERSION_3) Flags: 0xe (CTF_F_NEWFUNCINFO, CTF_F_IDXSORTED, CTF_F_DYNSTR) Parent name: .ctf Compilation unit name: /home/simark/src/babeltrace/src/lib/graph/component-descriptor-set.c Type section: 0x0 -- 0x13 (0x14 bytes) String section: 0x14 -- 0x5f (0x4c bytes) Labels: Data objects: Function objects: Variables: Types: 0x80000001: (kind 5) bt_bool (*) (const bt_value *) (aligned at 0x8) Strings: 0x0: 0x1: .ctf 0x6: /home/simark/src/babeltrace/src/lib/graph/component-descriptor-set.c It contains a single type, and it is skipped by ctf_add_type_cb, because an identical type was already seen earlier in this objfile. As a result, no compunit_symtab is created. Change psymbol_functions::expand_symtabs_matching to expect that psymtab_to_symtab can return nullptr. Another possibility would be to make the CTF symbol reader always create a compunit_symtab, even if there are no symbols in it (like the DWARF parser does), but so far I don't see any advantage in doing so. Change-Id: Ic43c38202c838a5eb87630ed1fd61d33528164f4 2022-04-04 Andrew Burgess sim: fixes for libopcodes styled disassembler In commit: commit 60a3da00bd5407f07d64dff82a4dae98230dfaac Date: Sat Jan 22 11:38:18 2022 +0000 objdump/opcodes: add syntax highlighting to disassembler output I broke several sim/ targets by forgetting to update their uses of the libopcodes disassembler to take account of the new styled printing. These should all be fixed by this commit. I've not tried to add actual styled output to the simulator traces, instead, the styled print routines just ignore the style and print the output unstyled. 2022-04-04 Tom Tromey Remove some globals from nat/windows-nat.c nat/windows-nat.c has a number of globals that it uses to communicate with its clients (gdb and gdbserver). However, if we ever want the Windows ports to be multi-inferior, globals won't work. This patch takes a step toward that by moving most nat/windows-nat.c globals into a new struct windows_process_info. Many functions are converted to be methods on this object. A couple of globals remain, as they are needed to truly be global due to the way that the Windows debugging APIs work. The clients still have a global for the current process. That is, this patch is a step toward the end goal, but doesn't implement the goal itself. 2022-04-04 Tom Tromey Remove windows_thread_info destructor windows_thread_info declares and defines a destructor, but this doesn't need to be explicit. Use unique_ptr in the Windows thread list windows-nat.c uses some manual memory management when manipulating the thread_list global. Changing this to use unique_ptr simplifies the code, in particular windows_init_thread_list. (Note that, while I think the the call to init_thread_list in there is wrong, I haven't removed it in this patch.) Use auto_obstack in windows-nat.c One spot in windows-nat.c can use auto_obstack, removing some manual memory management. 2022-04-04 Tom Tromey Simplify windows-nat.c solib handling Currently windows-nat.c uses struct so_list to record its local idea of which shared libraries have been loaded. However, many fields in this are not needed, and furthermore I found this quite confusing at first -- Windows actually uses solib-target and so the use of so_list here is weird. This patch simplifies this code by changing it to use a std::vector and a new type that holds exactly what's needed for the Windows code. 2022-04-04 Pedro Alves Avoid undefined behavior in gdbscm_make_breakpoint Running gdb.guile/scm-breakpoint.exp against an --enable-ubsan build, we see: UNRESOLVED: gdb.guile/scm-breakpoint.exp: test_watchpoints: create a breakpoint with an invalid type number ... guile (define wp2 (make-breakpoint "result" #:wp-class WP_WRITE #:type 999)) ../../src/gdb/guile/scm-breakpoint.c:377:11: runtime error: load of value 999, which is not a valid value for type 'bptype' ERROR: GDB process no longer exists Fix this by parsing the user/guile input as plain int, and cast to internal type only after we know we have a number that would be valid. Change-Id: I03578d07db00be01b610a8f5ce72e5521aea6a4b 2022-04-04 Tom Tromey Add context-sensitive field name completion to Ada parser This updates the Ada expression parser to implement context-sensitive field name completion. This is PR ada/28727. This is somewhat complicated due to some choices in the Ada lexer -- it chooses to represent a sequence of "."-separated identifiers as a single token, so the parser must partially recreate the completer's logic to find the completion word boundaries. Despite the minor warts in this patch, though, it is a decent improvement. It's possible that the DWARF reader rewrite will help fix the package completion problem pointed out in this patch as well. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28727 2022-04-04 Tom Tromey Consolidate single-char tokens in ada-lex.l There are two rules in ada-lex.l that match single-character tokens. This merges them. Also, this removes '.' from the list of such tokens. '.' is not used in any production in ada-exp.y, and removing it here helps the subsequent completion patches. 2022-04-04 Tom Tromey Remove the Ada DOT_ALL token The Ada parser has a DOT_ALL token to represent ".all", and another token to represent other "." forms. However, for completion it is a bit more convenient to unify these cases, so this patch removes DOT_ALL. Refactor ada-lex.l:processId processId in ada-lex.l is a bit funny -- it uses an "if" and a "switch", and a nested loop. This patch cleans it up a bit, changing it to use a boolean flag and a simpler "if". Implement completion for Ada attributes This adds a completer for Ada attributes. Some work in the lexer is required in order to match end-of-input correctly, as flex does not have a general-purpose way of doing this. (The approach taken here is recommended in the flex manual.) 2022-04-04 Tom Tromey Refactor expression completion This refactors the gdb expression completion code to make it easier to add more types of completers. In the old approach, just two kinds of completers were supported: field names for some sub-expression, or tag names (like "enum something"). The data for each kind was combined in single structure, "expr_completion_state", and handled explicitly by complete_expression. In the new approach, the parser state just holds an object that is responsible for implementing completion. This way, new completion types can be added by subclassing this base object. The structop completer is moved into structop_base_operation, and new objects are defined for use by the completion code. This moves much of the logic of expression completion out of completer.c as well. 2022-04-04 Tom Tromey Enable "set debug parser" for Ada I noticed that "set debug parser 1" did not affect Ada parsing. This patch fixes the problem. Because this is rarely useful, and pretty much only for maintainers, I didn't write a test case. 2022-04-04 Tom Tromey Fix bug in Ada attributes lexing The Ada lexer allows whitespace between the apostrophe and the attribute text, but processAttribute does not handle this. This patch fixes the problem and introduces a regression test. Remove null sentinel from 'attributes' In a subsequent patch, it's handy if the 'attributes' array in ada-lex.l does not have a NULL sentinel at the end. In C++, this is easy to avoid. Handle ghost entities in symbol lookup Normally, SPARK ghost entities are removed from the executable. However, with -gnata, they will be preserved. In this situation, it's handy to be able to inspect them. This patch allows this by removing the "___ghost_" prefix in the appropriate places. 2022-04-04 Simon Marchi gdb: rename start_symtab/end_symtab to start_compunit_symtab/end_compunit_symtab It's a bit confusing because we have both "compunit_symtab" and "symtab" types, and many methods and functions containing "start_symtab" or "end_symtab", which actually deal with compunit_symtabs. I believe this comes from the time before compunit_symtab was introduced, where symtab did the job of both. Rename everything I found containing start_symtab or end_symtab to use start_compunit_symtab or end_compunit_symtab. Change-Id: If3849b156f6433640173085ad479b6a0b085ade2 2022-04-04 Simon Marchi gdb: remove some unused buildsym-legacy functions Pretty much self-explanatory. Change-Id: I5b658d017cd891ecdd1df61075eacb0f44316935 2022-04-04 Fangrui Song gas: copy st_size only if unset For ``` .size foo1, 1 foo1: .set bar1, foo1 .size bar1, 2 .size bar2, 2 .set bar2, foo1 .set bar3, foo2 .size bar3, 2 .size bar4, 2 .set bar4, foo2 .size foo2, 1 foo2: ``` bar1's size is 2 while bar2, bar3, bar4's is 1. The behavior of bar1 makes sense (generally directives on the new symbol should win) and is relied upon by glibc stdio-common/errlist.c: ``` .hidden _sys_errlist_internal .globl _sys_errlist_internal .type _sys_errlist_internal, @object .size _sys_errlist_internal, 1072 _sys_errlist_internal: .globl __GLIBC_2_1_sys_errlist .set __GLIBC_2_1_sys_errlist, _sys_errlist_internal .type __GLIBC_2_1_sys_errlist, %object .size __GLIBC_2_1_sys_errlist, 125 * (64 / 8) // glibc expects that .size __GLIBC_2_1_sys_errlist, 125 * (64 / 8) wins. ``` The behavior of bar2/bar3/bar4 seems brittle. To avoid the reordering of the two code blocks which will result in the bar3 situation, glibc compiles errlist.c with gcc -fno-toplevel-reorder (previously -fno-unit-at-a-time). To fix the inconsistency and improve robustness, make bar2/bar3/bar4 match bar1, removing the directive order sensitivity. There is a pity that `.size dest, 0` is indistinguishable from the case where dest is unset, but the compromise seems fine. PR gas/29012 * config/obj-elf.c (elf_copy_symbol_attributes): don't copy if src's size has been set. * testsuite/gas/elf/elf.exp: New test. * testsuite/gas/elf/size.d: New file. * testsuite/gas/elf/size.s: Likewise. 2022-04-04 Andrew Burgess gdb: remove use of vfprintf_filtered Commit: commit 60a3da00bd5407f07d64dff82a4dae98230dfaac Date: Sat Jan 22 11:38:18 2022 +0000 objdump/opcodes: add syntax highlighting to disassembler output Introduced a new use of vfprintf_filtered, which has been deprecated. This commit replaces this with gdb_vprintf instead. 2022-04-04 Andrew Burgess opcodes/i386: partially implement disassembler style support This commit adds partial support for disassembler styling in the i386 disassembler. The i386 disassembler collects the instruction arguments into an array of strings, and then loops over the array printing the arguments out later on. The problem is that by the time we print the arguments out it's not obvious what the type of each argument is. Obviously this can be fixed, but I'd like to not do that as part of this commit, rather, I'd prefer to keep this commit as small as possible to get the basic infrastructure in place, then we can improve on this, to add additional styling, in later commits. For now then, I think this commit should correctly style mnemonics, some immediates, and comments. Everything else will be printed as plain text, which will include most instruction arguments, unless the argument is printed as a symbol, by calling the print_address_func callback. Ignoring colours, there should be no other user visible changes in the output of the disassembler in either objdump or gdb. opcodes/ChangeLog: * disassembler.c (disassemble_init_for_target): Set created_styled_output for i386 based targets. * i386-dis.c: Changed throughout to use fprintf_styled_func instead of fprintf_func. 2022-04-04 Andrew Burgess opcodes/riscv: implement style support in the disassembler Update the RISC-V disassembler to supply style information. This allows objdump to apply syntax highlighting to the disassembler output (when the appropriate command line flag is used). Ignoring colours, there should be no other user visible changes in the output of the disassembler in either objdump or gdb. opcodes/ChangeLog: * disassembler.c (disassemble_init_for_target): Set created_styled_output for riscv. * riscv-dis.c: Changed throughout to use fprintf_styled_func instead of fprintf_func. 2022-04-04 Andrew Burgess objdump/opcodes: add syntax highlighting to disassembler output This commit adds the _option_ of having disassembler output syntax highlighted in objdump. This option is _off_ by default. The new command line options are: --disassembler-color=off # The default. --disassembler-color=color --disassembler-color=extended-color I have implemented two colour modes, using the same option names as we use of --visualize-jumps, a basic 8-color mode ("color"), and an extended 8bit color mode ("extended-color"). The syntax highlighting requires that each targets disassembler be updated; each time the disassembler produces some output we now pass through an additional parameter indicating what style should be applied to the text. As updating all target disassemblers is a large task, the old API is maintained. And so, a user of the disassembler (i.e. objdump, gdb) must provide two functions, the current non-styled print function, and a new, styled print function. I don't currently have a plan for converting every single target disassembler, my hope is that interested folk will update the disassemblers they are interested in. But it is possible some might never get updated. In this initial series I intend to convert the RISC-V disassembler completely, and also do a partial conversion of the x86 disassembler. Hopefully having the x86 disassembler at least partial converted will allow more people to try this out easily and provide feedback. In this commit I have focused on objdump. The changes to GDB at this point are the bare minimum required to get things compiling, GDB makes no use of the styling information to provide any colors, that will come later, if this commit is accepted. This first commit in the series doesn't convert any target disassemblers at all (the next two commits will update some targets), so after this commit, the only color you will see in the disassembler output, is that produced from objdump itself, e.g. from objdump_print_addr_with_sym, where we print an address and a symbol name, these are now printed with styling information, and so will have colors applied (if the option is on). Finally, my ability to pick "good" colors is ... well, terrible. I'm in no way committed to the colors I've picked here, so I encourage people to suggest new colors, or wait for this commit to land, and then patch the choice of colors. I do have an idea about using possibly an environment variable to allow the objdump colors to be customised, but I haven't done anything like that in this commit, the color choices are just fixed in the code for now. binutils/ChangeLog: * NEWS: Mention new feature. * doc/binutils.texi (objdump): Describe --disassembler-color option. * objdump.c (disassembler_color): New global. (disassembler_extended_color): Likewise. (disassembler_in_comment): Likewise. (usage): Mention --disassembler-color option. (long_options): Add --disassembler-color option. (objdump_print_value): Use fprintf_styled_func instead of fprintf_func. (objdump_print_symname): Likewise. (objdump_print_addr_with_sym): Likewise. (objdump_color_for_disassembler_style): New function. (objdump_styled_sprintf): New function. (fprintf_styled): New function. (disassemble_jumps): Use disassemble_set_printf, and reset disassembler_in_comment. (null_styled_print): New function. (disassemble_bytes): Use disassemble_set_printf, and reset disassembler_in_comment. (disassemble_data): Update init_disassemble_info call. (main): Handle --disassembler-color option. include/ChangeLog: * dis-asm.h (enum disassembler_style): New enum. (struct disassemble_info): Add fprintf_styled_func field, and created_styled_output field. (disassemble_set_printf): Declare. (init_disassemble_info): Add additional parameter. (INIT_DISASSEMBLE_INFO): Add additional parameter. opcodes/ChangeLog: * dis-init.c (init_disassemble_info): Take extra parameter, initialize the new fprintf_styled_func and created_styled_output fields. * disassembler.c (disassemble_set_printf): New function definition. 2022-04-04 Tom Tromey Remove more Python 2 code I found another more place that still had a workaround for Python 2. This patch removes it. 2022-04-04 Tom de Vries [gdb/testsuite] Fix KPASS in gdb.ada/arrayptr.exp On openSUSE Leap 15.3 I run into: ... KPASS: gdb.ada/arrayptr.exp: scenario=minimal: print pa_ptr.all \ (PRMS minimal encodings) KPASS: gdb.ada/arrayptr.exp: scenario=minimal: print pa_ptr(3) \ (PRMS minimal encodings) KPASS: gdb.ada/arrayptr.exp: scenario=minimal: print pa_ptr.all(3) \ (PRMS minimal encodings) ... The test-case KFAILs some tests. However, the analysis in the corresponding PR talks of a compiler problem, so it should use XFAILs instead. The KFAILs are setup for pre-gcc-12, but apparantly the fix has been backported to system compiler 7.5.0, hence the KPASS. Fix this by: - using an XFAIL instead of a KFAIL - matching the specific gdb output that corresponds to the XFAILs (reproduced on Fedora 34). Tested on x86_64-linux, specifically openSUSE Leap 15.3 and Fedora 34. 2022-04-04 GDB Administrator Automatic date update in version.in 2022-04-03 rupothar gdb: add support for Fortran's ASSUMED RANK arrays This patch adds a new dynamic property DYN_PROP_RANK, this property is read from the DW_AT_rank attribute and stored within the type just like other dynamic properties. As arrays with dynamic ranks make use of a single DW_TAG_generic_subrange to represent all ranks of the array, support for this tag has been added to dwarf2/read.c. The final piece of this puzzle is to add support in gdbtypes.c so that we can resolve an array type with dynamic rank. To do this the existing resolve_dynamic_array_or_string function is split into two, there's a new resolve_dynamic_array_or_string_1 core that is responsible for resolving each rank of the array, while the now outer resolve_dynamic_array_or_string is responsible for figuring out the array rank (which might require resolving a dynamic property) and then calling the inner core. The resolve_dynamic_range function now takes a rank, which is passed on to the dwarf expression evaluator. This rank will only be used in the case where the array itself has dynamic rank, but we now pass the rank in all cases, this should be harmless if the rank is not needed. The only small nit is that resolve_dynamic_type_internal actually handles resolving dynamic ranges itself, which now obviously requires us to pass a rank value. But what rank value to use? In the end I just passed '1' through here as a sane default, my thinking is that if we are in resolve_dynamic_type_internal to resolve a range, then the range isn't part of an array with dynamic rank, and so the range should actually be using the rank value at all. An alternative approach would be to make the rank value a gdb::optional, however, this ends up adding a bunch of complexity to the code (e.g. having to conditionally build the array to pass to dwarf2_evaluate_property, and handling the 'rank - 1' in resolve_dynamic_array_or_string_1) so I haven't done that, but could, if people think that would be a better approach. Finally, support for assumed rank arrays was only fixed very recently in gcc, so you'll need the latest gcc in order to run the tests for this. Here's an example test program: PROGRAM arank REAL :: a1(10) CALL sub1(a1) CONTAINS SUBROUTINE sub1(a) REAL :: a(..) PRINT *, RANK(a) END SUBROUTINE sub1 END PROGRAM arank Compiler Version: gcc (GCC) 12.0.0 20211122 (experimental) Compilation command: gfortran assumedrank.f90 -gdwarf-5 -o assumedrank Without Patch: gdb -q assumedrank Reading symbols from assumedrank... (gdb) break sub1 Breakpoint 1 at 0x4006ff: file assumedrank.f90, line 10. (gdb) run Starting program: /home/rupesh/STAGING-BUILD-2787/bin/assumedrank Breakpoint 1, arank::sub1 (a=) at assumedrank.f90:10 10 PRINT *, RANK(a) (gdb) print RANK(a) 'a' has unknown type; cast it to its declared type With patch: gdb -q assumedrank Reading symbols from assumedrank... (gdb) break sub1 Breakpoint 1 at 0x4006ff: file assumedrank.f90, line 10. (gdb) run Starting program: /home/rupesh/STAGING-BUILD-2787/bin/assumedrank Breakpoint 1, arank::sub1 (a=...) at assumedrank.f90:10 10 PRINT *, RANK(a) (gdb) print RANK(a) $1 = 1 (gdb) ptype a type = real(kind=4) (10) (gdb) Co-Authored-By: Andrew Burgess 2022-04-03 Andrew Burgess gdb/dwarf: pass an array of values to the dwarf evaluator When we need to evaluate a DWARF expression in order to resolve some dynamic property of a type we call the dwarf2_evaluate_property function, which is declared in gdb/dwarf/loc.h and defined in gdb/dwarf/loc.c. Currently, this function takes (amongst other things) an argument of type property_addr_info called addr_stack and a boolean called push_initial_value. When push_initial_value then the top value of addr_stack is pushed onto the dwarf expression evaluation stack before the expression is evaluated. So far this has worked fine, as the only two cases we needed to handle are the case the DWARF expression doesn't require the object address (what the top of addr_stack represents), and the case where the DWARF expression does require the address. In the next commit this is going to change. As we add support for Fortran assumed rank arrays, we need to start resolving the dynamic properties of arrays. To do this, we need to push the array rank onto the dwarf expression evaluation stack before the expression is evaluated. This commit is a refactoring commit aimed at making it easier to support Fortran assumed rank arrays. Instead of passing a boolean, and using this to decide if we should push the object address or not, we instead pass an array (view) of values that should be pushed to the dwarf expression evaluation stack. In the couple of places where we previously passed push_initial_value as true (mostly this was defaulting to false), we now have to pass the address from the addr_stack as an item in the array view. In the next commit, when we want to handle passing the array rank, this will easily be supported too. There should be no user visible changes after this commit. 2022-04-03 Andrew Burgess gdb: small simplification in dwarf2_locexpr_baton_eval While examining the dwarf expression evaluator, I noticed that in dwarf2_locexpr_baton_eval, whenever push_initial_value is true, the addr_stack will never be nullptr. This allows for a small cleanup, replacing an if/then/else with an assertion. There should be no user visible changes after this commit. 2022-04-03 Andrew Burgess gdb/testsuite: resolve some duplicate test names in gdb.base This commit resolves all the duplicate test names that I see in the script: gdb.base/attach-pie-misread.exp The duplicate names all come from a second call to build_executable_own_libs, so in this commit I've places the second call inside a with_test_prefix block. While I was making this change I've also modified the value being passed as the testname for the second build_executable_own_libs call. Previously we used ${test}, however, I think this was likely a mistake, the 'test' variable is setup for the previous test. I suspect that ${testfile} is a better choice - especially now we have a testname prefix. As the testname is only used (after various calls) from within build_executable_from_specs should the build fail, I don't think this change really makes much difference though. There should be no change in what is tested after this commit. 2022-04-03 Andrew Burgess gdb/testsuite: resolve a duplicate test name in a gdb.mi test Solve two duplicate test names in the test script: gdb.mi/mi-catch-cpp-exceptions.exp by moving the call to restart_for_test inside the with_test_prefix block. There should be no difference in what is tested after this commit. 2022-04-03 Andrew Burgess gdb/Makefile.in: move ALLDEPFILES earlier in Makefile.in If I do 'make tags' in the gdb build directory, the tags target does complete, but I see these warnings: ../../src/gdb/arm.c: No such file or directory ../../src/gdb/arm-get-next-pcs.c: No such file or directory ../../src/gdb/arm-linux.c: No such file or directory The reason for this is the ordering of build rules and make variables in gdb/Makefile.in, specifically, the placement of the tags related rules, and the ALLDEPFILES variable. The ordering is like this: TAGFILES_NO_SRCDIR = .... $(ALLDEPFILES) .... TAGS: $(TAGFILES_NO_SRCDIR) .... # Recipe uses $(TAGFILES_NO_SRCDIR) tags: TAGS ALLDEPFILES = ..... When the TAGS rule is parsed TAGFILES_NO_SRCDIR is expanded, which then expands ALLDEPFILES, which, at that point in the Makefile is undefined, and so expands to the empty string. As a result TAGS does not depend on any file listed in ALLDEPFILES. However, when the TAGS recipe is invoked ALLDEPFILES is now defined. As a result, all the files in ALLDEPFILES are passed to the etags program. The ALLDEPFILES references three files, arm.c, arm-get-next-pcs.c, and arm-linux.c, which are actually in the gdb/arch/ directory, but, in ALLDEPFILES these files don't include the arch/ prefix. As a result, the etags program ends up looking for these files in the wrong location. As ALLDEPFILES is only used by the TAGS rule, this mistake was not previously noticed (the TAGS rule itself was broken until a recent commit). In this commit I make two changes, first, I move ALLDEPFILES to be defined before TAGFILES_NO_SRCDIR, this means that the TAGS rule will depend on all the files in ALLDEPFILES. With this change the TAGS rule now breaks complaining that there's no rule to build the 3 files mentioned above. Next, I have added all *.c files in gdb/arch/ to ALLDEPFILES, including their arch/ prefix, and removed the incorrect (missing arch/ prefix) references. With these two changes the TAGS (or tags if you prefer) target now builds without any errors or warnings. 2022-04-03 Reuben Thomas gdb/Makefile.in: fix 'make tags' build target The gdb_select.h file was moved to the gdbsupport directory long ago, but a reference was accident left in gdb/Makefile.in (in the HFILES_NO_SRCDIR variable), this commit removes that reference. Before this commit, if I use 'make tags' here's what I see: $ make tags make: *** No rule to make target 'gdb_select.h', needed by 'TAGS'. Stop. After this commit 'make tags' completes, but I still see these warnings: ../../src/gdb/arm.c: No such file or directory ../../src/gdb/arm-get-next-pcs.c: No such file or directory ../../src/gdb/arm-linux.c: No such file or directory These are caused by a separate issue, and will be addressed in the next commit. 2022-04-03 Andrew Burgess gdb/Makefile.in: remove SOURCES variable The SOURCES variable was added to gdb/Makefile.in as part of commit: commit fb40c20903110ed8af9701ce7c2635abd3770d52 Date: Wed Feb 23 00:25:43 2000 +0000 Add mi/ and testsuite/gdb.mi/ subdirectories. But as far as I can tell was not used at the time it was added, and is not used today. Lets remove it. 2022-04-03 Andrew Burgess gdb/tui: fair split of delta after a resize Currently, in master gdb, when a tui window is changed in size, the screen delta is mostly just added to the next available window. We do take care to respect the min/max size, but in most cases, these limits are just "the terminal size", and so, we end up placing the whole delta on the next window. Consider these steps in an 80 column, 24 line terminal: (gdb) tui enable (gdb) layout src (gdb) layout split (gdb) info win Name Lines Columns Focus src 8 80 (has focus) asm 8 80 status 1 80 cmd 8 80 (gdb) winheight cmd +2 (gdb) info win Name Lines Columns Focus src 6 80 (has focus) asm 8 80 status 1 80 cmd 10 80 Notice that initially, the windows were balanced, 8 lines each for the major windows. Then, when the cmd window was adjusted, the extra two lines were given to the asm window. I think it would be nicer if the delta was spread more evenly over the available windows. In the example above, after the adjustment the layout now looks like: (gdb) info win Name Lines Columns Focus src 7 80 (has focus) asm 7 80 status 1 80 cmd 10 80 This is achieved within tui_layout_split::set_size, by just handing out the delta in increments of 1 to each window (except for the window the user adjusted), until there's no more delta left. Of course, we continue to respect the min/max window sizes. 2022-04-03 Andrew Burgess gdb/tui: relax restrictions on window max height and width This commit removes some arbitrary adjustments made in tui_cmd_window::max_height, tui_win_info::max_height, and tui_win_info::max_width. These member functions all subtract some constant from the theoretical maximum height or width. I've looked back through the history a little and can see no real reason why these adjustments should be needed, with these adjustments removed all the existing tui tests still pass. However, retaining these restrictions causes some bugs, consider: (gdb) tui new-layout hsrc {-horizontal src 1 cmd 1} 1 When this layout is selected with current master, gdb will leave a 4 line gap at the bottom of the terminal. The problem is that the maximum height is restricted, for the cmd window, to 4 less than the terminal height. By removing this restriction gdb is able to size the windows to the complete terminal height, and the layout is done correctly. This 4 line restriction is also what prevents this layout from working correctly: (gdb) tui new-layout conly cmd 1 Previously, this layout would present a cmd window only, but there would be a 4 line gap at the bottom of the terminal. This issue was mentioned in an earlier commit in this series (when a different bug was fixed), but with this commit, the above layout now correctly fills the terminal. The associated test is updated. After removing the adjustment in tui_cmd_window::max_height, the implementation is now the same as the implementation in the parent class tui_win_info, so I've completely removed the max_height call from tui_cmd_window. 2022-04-03 Andrew Burgess gdb/testsuite: some additional tests in gdb.tui/scroll.exp This commit just adds an extra check of the src window size prior to sending all the commands to gdb. We also set the cmd window height to its existing height, this (obviously) shouldn't change the window layout, which we check. My main motivation was adding the initial window layout check, the winheight and recheck are just extras. All of these test pass both before and after this commit. 2022-04-03 Andrew Burgess gdb/tui: support placing the cmd window into a horizontal layout This commit allows the user to place the cmd window within horizontal tui layouts. Consider this set of steps, carried out in an 80 columns by 24 lines terminal, using current master gdb: (gdb) tui new-layout hsrc { -horizontal src 1 cmd 1 } 1 status 1 (gdb) tui layout hsrc What you end up with is a full width cmd window with the status bar beneath. Where's the src window gone? We then try: (gdb) info win Name Lines Columns Focus src 23 3 (has focus) cmd 23 80 status 1 80 (gdb) Something weird has gone on, gdb has overlapped the cmd window with the src window. If we trigger the src window to redraw is content, for example, 'list main', then we see corruption in the cmd window as the src window overwrites it. So, what's going on? The problem is some code in tui_layout_split::apply, in tui-layout.c. Within 'Step 1', there is a loop that calculates the min/max window sizes for all windows within a tui_layout_split. However, there's a special case for the cmd window. This special case is trying to have the cmd window retain its current size when a layout is re-applied, or a new layout is applied. This makes sense, consider moving from the 'src' layout to the 'asm' layout, this looks something like this (status window removed): .-------. .-------. | src | | asm | |-------| ====> |-------| | cmd | | cmd | '-------' '-------' If the user has gone to the effort of adjusting the cmd window size, then, the thinking goes, we shouldn't reset the cmd window size when switching layouts like this. The problem though, is that when we do a switch more like this: .-----------. .-----------. | src | | | | |-----------| ====> | asm | cmd | | cmd | | | | '-----------' '-----------' Now retaining the cmd window width makes no sense; the new layout has a completely different placement for the cmd window, instead of sizing by height, we're now sizing by width. The existing code doesn't understand this though, and tried to retain the full width for the cmd window. To solve this problem, I propose we introduce the idea of a layout "fingerprint". The fingerprint tries to capture, in an abstract way, where the cmd window lives within the layout. Only when two layouts have the same fingerprint will we attempt to retain the cmd window size. The fingerprint for a layout is represented as a string, the string is a series of 'V' or 'H' characters, ending with a single 'C' character. The series of 'V' and 'H' characters represent the vertical or horizontal layouts that must be passed through to find the cmd window. Here are a few examples: # This layout is equivalent to the builtin 'src' layout. # Fingerprint: VC tui new-layout example1 src 2 status 0 cmd 1 # This layout is equivalent to the builtin 'split' layout. # Fingerprint: VC tui new-layout example2 src 1 asm 1 status 0 cmd 1 # This is the same layout that was given at the top. # Fingerprint: VHC tui new-layout hsrc { -horizontal src 1 cmd 1 } 1 status 1 And so, when switching between example1 and example2, gdb knows that the cmd window is, basically, in the same sort of position within the layout, and will retain the cmd window size. In contrast, when switching to the hsrc layout, gdb understands that the position of the cmd window is different, and does not try to retain the cmd window size. 2022-04-03 Andrew Burgess gdb/tui: allow cmd window to change size in tui_layout_split::apply When we switch layouts we call the tui_layout_split::apply member function to reapply the layout, and recalculate all the window sizes. One special case is the cmd window, which we try to keep at its existing size. However, in some cases it is not appropriate to keep the cmd window at its existing size. I will describe two such cases here, in one, we want the cmd window to reduce in size, and in the other, we want the cmd window to grow in size. Try these steps in a 80 columns, by 24 lines terminal: (gdb) tui enable (gdb) layout src (gdb) winheight cmd 20 (gdb) layout split You should see that the status window is missing from the new layout, and that the cmd window has been placed over the border of the asm window. The 'info win' output is: (gdb) info win Name Lines Columns Focus src 3 80 (has focus) asm 3 80 status 1 80 cmd 20 80 Notice that gdb has assigned 27 lines of screen space, even with the border overlap between the src and asm windows, this is still 2 lines too many. The problem here is that after switching layouts, gdb has forced the cmd window to retain its 20 line height. Really, we want the cmd window to reduce in height so that the src and asm windows can occupy their minimum required space. This commit allows this (details on how are below). After this commit, in the above situation, we now see the status window displayed correctly, and the 'info win' output is: (gdb) info win Name Lines Columns Focus src 3 80 (has focus) asm 3 80 status 1 80 cmd 18 80 The cmd window has been reduced in size by 2 lines so that everything can fit on the screen. The second example is one which was discussed in a recent commit, consider this case (still in the 80 column, 24 line terminal): (gdb) tui enable (gdb) tui new-layout conly cmd 1 (gdb) layout conly (gdb) info win Name Lines Columns Focus cmd 8 80 (has focus) (gdb) This layout only contains a cmd window, which we would expect to occupy the entire terminal. But instead, the cmd window only occupies the first 8 lines, and the rest of the terminal is unused! The reason is, again, that the cmd window is keeping its previous size (8 lines). After this commit things are slightly different, the 'info win' output is now: (gdb) info win Name Lines Columns Focus cmd 20 80 (has focus) Which is a little better, but why only 20 lines? Turns out there's yet another bug hitting this case. That bug will be addressed in a later commit, so, for now, we're accepting the 20 lines. What this commit does is modify the phase of tui_layout_split::apply that handles any left over space. Usually, in "Step 2", each sub-layout has a size calculated. As the size is an integer, then, when all sizes are calculated we may have some space left over. This extra space is then distributed between all the windows fairly until all the space is used up. When we consider windows minimum size, or fixed size windows, then it is possible that we might try to use more space than is available, this was our first example above. The same code that added extra space to the windows, can also be used to reclaim space (in the over allocation case) to allow all windows to fit. The problem then is the cmd window, which we often force to a fixed size. Inside the loop that handles the allocation of excess space, if we find that we have tried every window, and still have space either left to give, or we need to claim back more space, then, if the cmd window was changed to a fixed size, we can change the cmd window back to a non-fixed-size window, and proceed to either give, or take space from the cmd window as needed. 2022-04-03 Andrew Burgess gdb/tui: fairer distribution of excess space during apply When applying layouts gdb computes the size of each window (or rather, each sub-layout within a layout) using integer arithmetic. As this rounds down the results, then, when all sub-layouts are sized, there is the possibility that we have some space left over. Currently, this space is just assigned to an arbitrary sub-layout. This can result in some unbalanced results. Consider this set of steps with current master: (gdb) tui enable (gdb) layout regs (gdb) info win Name Lines Columns Focus regs 7 80 src 9 80 (has focus) status 1 80 cmd 8 80 Notice the weird split between the src and regs windows, the original layout specification has these windows given equal weight. The problem is that, with rounding, both the regs and src windows are initially sized to 7, the extra 2 lines are then arbitrarily added to the src window. In this commit, rather than add all the extra space to one single window, I instead hand out the extra space 1 line at a time, looping over all the sub-layouts. We take care to respect the min/max sizes, and so, we now get this result: (gdb) tui enable (gdb) layout regs (gdb) info win Name Lines Columns Focus regs 8 80 src 8 80 (has focus) status 1 80 cmd 8 80 This looks more natural to me. This is obviously a change in behaviour, and so, lots of the existing tests need to be updated to take this into account. None of the changes are huge, it's just a line or two (or column for width) moved between windows. 2022-04-03 Andrew Burgess gdb/tui: avoid fp exception when applying layouts Consider: (gdb) tui enable (gdb) layout src (gdb) tui new-layout conly cmd 1 (gdb) layout conly After this, with current master, gdb crashes with a floating-point exception. The problem is that in tui_layout_split::apply, when we switch from 'src' to 'conly', we will try to retain the cmd window height. As such, the cmd window will become a fixed size window, which decreases the available_size, but doesn't count towards the total_weight. As the cmd window is the only window, the total_weight stays at zero, and, when we move into step 2, where we attempt to size the windows, we perform a divide by zero, and crash. After this commit we avoid the divide by zero, and just directly set the window size based on the fixed size. There is still a problem after this commit, when the conly layout is selected the cmd window retains its original height, which will only be part of the terminal. The rest of the terminal is left unused. This issue will be addressed in a later commit, this commit is just about the floating-point exception. 2022-04-03 Andrew Burgess gdb/tui/testsuite: refactor new-layout.exp test This commit changes the gdb.tui/new-layout.exp test to make use of a list of test descriptions, and a loop to check each description in turn. There's no change to what is actually tested after this commit. In future commits I plan to add additional tests to this file, and this will be easier now that all I have to do is add a new test description to the list. 2022-04-03 Andrew Burgess gdb/tui: add left_boxed_p and right_boxed_p member functions When I initially saw this code in tui_layout_split::apply, I assumed that this must be a bug: /* Two adjacent boxed windows will share a border, making a bit more size available. */ if (i > 0 && m_splits[i - 1].layout->bottom_boxed_p () && m_splits[i].layout->top_boxed_p ()) ... After all, the apply might be laying out a horizontal layout, right? So checking bottom_boxed_p and top_boxed_p is clearly wrong. Well, it turns on, that due to the implementations of these things, bottom_boxed_p is equivalent to an imagined right_boxed_p, and top_boxed_p is equivalent to an imagined left_boxed_p. In this commit I've renamed both top_boxed_p and bottom_boxed_p to first_edge_has_border_p and last_edge_has_border_p respectively, and extended the comments in tui_layout_base to mention that these methods handle both horizontal and vertical layouts. Now, hopefully, the code shouldn't look like it only applies for vertical layouts. There should be no user visible changes after this commit. 2022-04-03 Andrew Burgess gdb/tui: add a tui debugging flag This commit adds 'set debug tui on|off' and 'show debug tui'. This commit adds the control variable, and the printing macros in tui/tui.h. I've then added some uses of these in tui.c and tui-layout.c. To help produce more useful debug output in tui-layout.c, I've added some helper member functions in the class tui_layout_split, and also moved the size_info struct out of tui_layout_split::apply into the tui_layout_split class. If tui debug is not turned on, then there should be no user visible changes after this commit. One thing to note is that, due to the way that the tui terminal is often cleared, the only way I've found this useful is when I do: (gdb) tui enable (gdb) set logging file /path/to/file (gdb) set logging debugredirect on (gdb) set logging enable on Additionally, gdb has some quirks when it comes to setting up logging redirect and switching interpreters. Thus, the above only really works if the logging is enabled after the tui is enabled, and disabled again before the tui is disabled. Enabling logging and switching interpreters can cause undefined results, including crashes. This is an existing bug in gdb[1], and has nothing directly to do with tui debug, but it is worth mentioning here I think. [1] https://sourceware.org/bugzilla/show_bug.cgi?id=28948 2022-04-03 Andrew Burgess gdb/tui: add new 'tui window width' command and 'winwidth' alias This commit adds a new command 'tui window width', and an alias 'winwidth'. This command is equivalent to the old 'winheight' command (which was recently renamed 'tui window height'). Even though I recently moved the old tui commands under the tui namespace, and I would strongly encourage all new tui commands to be added as 'tui ....' only (users can create their own top-level aliases if they want), I'm breaking that suggestion here, and adding a 'winwidth' alias. Given that we already have 'winheight' and have done for years, it just didn't seem right to no have the matching 'winwidth'. You might notice in the test that the window resizing doesn't quite work right. I setup a horizontal layout, then grow and shrink the windows. At the end of the test the windows should be back to their original size... ... they are not. This isn't my fault, honest! GDB's window resizing is a little ... temperamental, and is prone to getting things slightly wrong during resizes, off by 1 type things. This is true for height resizing, as well as the new width resizing. Later patches in this series will rework the resizing algorithm, which should improve things in this area. For now, I'm happy that the width resizing is as good as the height resizing, given the existing quirks. For the docs side I include a paragraph that explains how multiple windows are required before the width can be adjusted. For completeness, I've added the same paragraph to the winheight description. With the predefined layouts this extra paragraph is not really needed for winheight, as there are always multiple windows on the screen. However, with custom layouts, this might not be true, so adding the paragraph seems like a good idea. As for the changes in gdb itself, I've mostly just taken the existing height adjustment code, changed the name to make it generic 'size' adjustment, and added a boolean flag to indicate if we are adjusting the width or the height. 2022-04-03 Andrew Burgess gdb/tui: rename tui_layout_split:set_weights_from_heights In a following commit I'm going to add the ability to change the width of a tui window (when in a horizontal layout). As a result, some of the places where we currently hard-code references to height need to be changed to handle either height, or width, based on whether we are in a vertical, or horizontal layout. This commit renames set_weights_from_heights to set_weights_from_sizes, and makes the function use either the height, or width as appropriate. Currently, the only place that we call this function is from the tui_layout_split::set_height function, in a part of the code we will only reach for vertical layouts, so the new code is not actually being used, but, this small change will help make later patches smaller, so I'm proposing this as a stand alone change. There should be no user visible changes after this commit. 2022-04-03 Andrew Burgess gdb/tui: rename tui_layout_base::adjust_size to ::set_height Rename tui_layout_base::adjust_size to tui_layout_base::set_height, the new name more accurately reflects what this member function does, and makes it easier for a later commit to add a new tui_layout_base::set_width member function. There should be no user visible changes after this commit. 2022-04-03 Andrew Burgess gdb: move some commands into the tui namespace There are a lot of tui related commands that live in the top-level command name space, e.g. layout, focus, refresh, winheight. Having them at the top level means less typing for the user, which is good, but, I think, makes command discovery harder. In this commit, I propose moving all of the above mentioned commands into the tui namespace, so 'layout' becomes 'tui layout', etc. But I will then add aliases so that the old commands will still work, e.g. I'll make 'layout' an alias for 'tui layout'. The benefit I see in this work is that tui related commands can be more easily discovered by typing 'tui ' and then tab-completing. Also the "official" command is now a tui-sub-command, this is visible in, for example, the help output, e.g.: (gdb) help layout tui layout, layout Change the layout of windows. Usage: tui layout prev | next | LAYOUT-NAME List of tui layout subcommands: tui layout asm -- Apply the "asm" layout. tui layout next -- Apply the next TUI layout. tui layout prev -- Apply the previous TUI layout. tui layout regs -- Apply the TUI register layout. tui layout split -- Apply the "split" layout. tui layout src -- Apply the "src" layout. Which I think is a good thing, it makes it clearer that this is a tui command. I've added a NEWS entry and updated the docs to mention the new and old command names, with the new name being mentioned first. 2022-04-03 Simon Marchi gdb: fix gdb_print -> gdb_printf typo This caused a build failure with !CXX_STD_THREAD. Change-Id: I30f0c89c43a76f85c0db34809192644fa64a9d18 2022-04-03 Alan Modra Move microblaze relax info to target specific data Target specific data shouldn't be put in struct bfd_section. * section.c (struct bfd_section): Delete relax and relax_count. (BFD_FAKE_SECTION): Adjust to suit. (struct relax_table): Move to.. * elf32-microblaze.c (struct relax_table): ..here. (struct _microblaze_elf_section_data): New. (microblaze_elf_section_data): Define. (microblaze_elf_new_section_hook): New function. (bfd_elf32_new_section_hook): Define. (calc_fixup): Return a size_t. Adjust to suit new location of relax and relax_count. (microblaze_elf_relax_section): Adjust to suit new location of relax and relax_count. Make some variables size_t. * bfd-in2.h: Regenerate. 2022-04-03 Alan Modra Revert commit 240d6706c6a2 PR 28592 PR 15994 PR 15935 * dwarf2.c (lookup_address_in_line_info_table): Return bool rather than a range. (comp_unit_find_nearest_line): Likewise. Return true if function info found without line info. (_bfd_dwarf2_find_nearest_line): Revert range handling code. Regen bfd po/SRC-POTFILES.in 2022-04-03 GDB Administrator Automatic date update in version.in 2022-04-02 Tiezhu Yang gdb: rename floatformats_ia64_quad to floatformats_ieee_quad It is better to rename floatformats_ia64_quad to floatformats_ieee_quad to reflect the reality, and then we can clean up the related code. As Tom Tromey said [1]: These files are maintained in gcc and then imported into the binutils-gdb repository, so any changes to them will have to be proposed there first. the related changes have been merged into gcc master now [2], it is time to do it for gdb. [1] https://sourceware.org/pipermail/gdb-patches/2022-March/186569.html [2] https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=b2dff6b2d9d6 2022-04-02 GDB Administrator Automatic date update in version.in 2022-04-01 John Baldwin Remove unused variable. 2022-04-01 Aaron Merey gdb/debuginfod-support.c: Always display debuginfod errors Errors encountered when downloading files from debuginfod servers are not displayed if debuginfod verbosity is set to 0 (via 'set debuginfod verbose 0'). Tom recommended that these errors always be displayed, regardless of the verbosity setting [1]. Fix this. [1] https://sourceware.org/pipermail/gdb-patches/2022-March/186350.html 2022-04-01 John Baldwin Use I386_GSBASE_REGNUM in i386fbsd_get_thread_local_address. 32-bit x86 arches always the I386_*BASE_REGNUM values. Only code that needs to support both 64-bit and 32-bit arches needs to use tdep->fsbase_regnum to compute a segment base register number. FreeBSD/x86: Read segment base registers from NT_X86_SEGBASES. FreeBSD kernels recently grew a new register core dump note containing the base addresses of the %fs and %gs segments (corresponding to the %fsbase and %gsbase registers). Parse this note to permit inspecting TLS variables in core dumps. Native processes already supported TLS via older ptrace() operations. 2022-04-01 John Baldwin Use pseudosections for NT_FREEBSD_X86_SEGBASES core dump notes. This includes adding pseudosections when reading a core dump as well as support for writing out a core dump note from a pseudosection. bfd/ChangeLog: * elf-bfd.h (elfcore_write_x86_segbases): New. * elf.c (elfcore_grok_freebsd_note): Add pseudosections for NT_FREEBSD_X86_SEGBASES register notes. (elfcore_write_x86_segbases): New. (elfcore_write_register_note): Write NT_FREEBSD_X86_SEGBASES register notes. 2022-04-01 John Baldwin Recognize FreeBSD core dump note for x86 segment base registers. This core dump note contains the value of the base address of the %fs and %gs segments for both i386 and amd64 core dumps. It is primarily useful in resolving the address of TLS variables in core dumps. binutils/ChangeLog: * readelf.c (get_freebsd_elfcore_note_type): Handle NT_FREEBSD_X86_SEGBASES. include/ChangeLog: * elf/common.h (NT_FREEBSD_X86_SEGBASES): Define. 2022-04-01 John Baldwin elfcore_grok_freebsd_note: Remove checks of note->namesz. This function is only called if the note name is "FreeBSD", so checking the name size is unnecessary. bfd/ChangeLog: * elf.c (elfcore_grok_freebsd_note): Remove checks for namesz. 2022-04-01 Andrew Burgess gdb/testing/tui: add new _csi_{L,S,T} This patch was original part of this series: https://sourceware.org/pipermail/gdb-patches/2022-March/186429.html https://sourceware.org/pipermail/gdb-patches/2022-March/186433.html I've pulled this out as it might be useful ahead of the bigger series being merged. This commit adds: _csi_L - insert line _csi_S - pan down _csi_T - pan up 2022-04-01 H.J. Lu x86: Remove bfd_arch_l1om and bfd_arch_k1om Remove bfd_arch_l1om and bfd_arch_k1om since L1OM/K1OM support has been removed from gas, ld and opcodes. bfd/ * Makefile.am (ALL_MACHINES): Remove cpu-l1om.lo and cpu-k1om.lo. (ALL_MACHINES_CFILES): Remove cpu-l1om.c and cpu-k1om.c. * archures.c (bfd_mach_l1om): Removed. (bfd_mach_l1om_intel_syntax): Likewise. (bfd_mach_k1om): Likewise. (bfd_mach_k1om_intel_syntax): Likewise. (bfd_k1om_arch): Likewise. (bfd_l1om_arch): Likewise. (bfd_archures_list): Remove bfd_k1om_arch and bfd_l1om_arch references. * config.bfd (targ_selvecs): Remove l1om_elf64_vec. l1om_elf64_fbsd_vec, k1om_elf64_vec and k1om_elf64_fbsd_vec. (targ_archs): Remove bfd_l1om_arch and bfd_k1om_arch. * configure.ac (k1om_elf64_vec): Removed. (k1om_elf64_fbsd_vec): Likewise. (l1om_elf64_vec): Likewise. (l1om_elf64_fbsd_vec): Likewise. * cpu-k1om.c: Removed. * cpu-l1om.c: Likewise. * elf64-x86-64.c (elf64_l1om_elf_object_p): Removed. (elf64_k1om_elf_object_p): Likewise. (l1om_elf64_vec): Removed. (l1om_elf64_fbsd_vec): Likewise. (k1om_elf64_vec): Likewise. (k1om_elf64_fbsd_vec): Likewise. (ELF_TARGET_OS): Undefine. * targets.c (_bfd_target_vector): Remove k1om_elf64_vec, k1om_elf64_fbsd_vec, l1om_elf64_vec and l1om_elf64_fbsd_vec. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * configure: Likewise. opcodes/ * configure.ac: Remove bfd_arch_l1om/bfd_arch_k1om references. * disassemble.c (disassembler): Likewise. * configure: Regenerate. 2022-04-01 Simon Marchi gdb/ctf: pass partial symtab's filename to buildsym_compunit I noticed that the CTF symbol reader passes the objfile's name to all buildsym_compunit instances it creates. The result is that all compunit_symtabs created have the same name, that of the objfile: { objfile /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0 ((struct objfile *) 0x613000005d00) { ((struct compunit_symtab *) 0x621000286760) debugformat ctf producer (null) name libbabeltrace2.so.0.0.0 dirname (null) blockvector ((struct blockvector *) 0x6210003911d0) user ((struct compunit_symtab *) (null)) { symtab /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0 ((struct symtab *) 0x6210003911f0) fullname (null) linetable ((struct linetable *) 0x0) } } { ((struct compunit_symtab *) 0x621000275c10) debugformat ctf producer (null) name libbabeltrace2.so.0.0.0 dirname (null) blockvector ((struct blockvector *) 0x621000286710) user ((struct compunit_symtab *) (null)) { symtab /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0 ((struct symtab *) 0x621000286730) fullname (null) linetable ((struct linetable *) 0x0) } } Notice the two "name libbabeltrace2.so.0.0.0". Change it to pass the partial_symtab's filename instead. The output becomes: { objfile /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0 ((struct objfile *) 0x613000005d00) { ((struct compunit_symtab *) 0x621000295610) debugformat ctf producer (null) name libbabeltrace2.so.0.0.0 dirname (null) blockvector ((struct blockvector *) 0x6210003a15d0) user ((struct compunit_symtab *) (null)) { symtab /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0 ((struct symtab *) 0x6210003a15f0) fullname (null) linetable ((struct linetable *) 0x0) } } { ((struct compunit_symtab *) 0x621000288700) debugformat ctf producer (null) name current-thread.c dirname (null) blockvector ((struct blockvector *) 0x6210002955c0) user ((struct compunit_symtab *) (null)) { symtab /home/simark/src/babeltrace/src/lib/current-thread.c ((struct symtab *) 0x6210002955e0) fullname (null) linetable ((struct linetable *) 0x0) } } Note that the first compunit_symtab still has libbabeltrace2.so.0.0.0 as its name. This is because the CTF symbol reader really creates a partial symtab named like this. It appears to be because the debug info contains information that has been factored out of all CUs and is at the "top-level" of the objfile, outside any real CU. So it creates a partial symtab and an artificial CU that's named after the objfile. Change-Id: I576316bab2a3668adf87b4e6cebda900a8159b1b 2022-04-01 Simon Marchi gdb: print compunit_symtab name in "maint info symtabs" I think it would make sense to print a compunit_symtab's name in "maint info symtabs". If you are looking for a given CU in the list, that's probably the field you will be looking at. As the doc of compunit_symtab::name says, it is not meant to be a reliable file name, it is for debugging purposes (and "maint info symtabs" exists for debugging purposes). Sample output with the new field: (gdb) maintenance info symtabs { objfile /home/simark/build/binutils-gdb-one-target/gdb/a.out ((struct objfile *) 0x613000005d00) { ((struct compunit_symtab *) 0x621000131630) debugformat DWARF 5 producer GNU C17 11.2.0 -mtune=generic -march=x86-64 -g3 -O0 name test.c dirname /home/simark/build/binutils-gdb-one-target/gdb blockvector ((struct blockvector *) 0x621000131d10) user ((struct compunit_symtab *) (null)) { symtab test.c ((struct symtab *) 0x6210001316b0) fullname (null) linetable ((struct linetable *) 0x621000131d40) } { symtab /home/simark/build/binutils-gdb-one-target/gdb/test.h ((struct symtab *) 0x6210001316e0) fullname (null) linetable ((struct linetable *) 0x0) } { symtab /usr/include/stdc-predef.h ((struct symtab *) 0x621000131710) fullname (null) linetable ((struct linetable *) 0x0) } } { ((struct compunit_symtab *) 0x6210001170a0) debugformat DWARF 5 producer GNU C17 11.2.0 -mtune=generic -march=x86-64 -g3 -O0 name foo.c dirname /home/simark/build/binutils-gdb-one-target/gdb blockvector ((struct blockvector *) 0x621000131580) user ((struct compunit_symtab *) (null)) { symtab foo.c ((struct symtab *) 0x621000117120) fullname (null) linetable ((struct linetable *) 0x6210001315b0) } { symtab /usr/include/stdc-predef.h ((struct symtab *) 0x621000117150) fullname (null) linetable ((struct linetable *) 0x0) } } } Change-Id: I17b87adfac2f6551cb5bda30d59f6c6882789211 2022-04-01 Simon Marchi gdb/ctf: don't create a buildsym_compunit when building partial symbols I am trying to do some changes to buildsym_compunit, so I am auditing the current uses. Something seems odd with this use of buildsym_compunit (that this patch removes). A buildsym_compunit is normally used when building a compunit_symtab. That is, when expanding a partial symtab into a full compunit symtab. In ctfread.c, a buildsym_compunit is created in ctf_start_archive, which is only used when creating partial symtabs. At this moment, I don't see how that's useful. ctf_start_archive creates a new buildsym_compunit and starts a subfile. But that buildsym_compunit is never used again. It's just overriden in ctf_start_symtab, which means we leak the old buildsym_compunit, I suppose. Remove ctf_start_archive completely. Add an assert in ctf_start_symtab to verify that we are not overwriting an existing buildsym_compunit (meaning we'd leak the existing one). This assert triggers without the other part of the fix. When doing: $ ./gdb --data-directory=data-directory /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0 ... (gdb) maintenance expand-symtabs /home/simark/src/binutils-gdb/gdb/ctfread.c:1255: internal-error: ctf_start_symtab: Assertion `!ccp->builder' failed. Change-Id: I666d146454a019f08e7305f3a1c4a974d27b4592 2022-04-01 Tom Tromey Style URLs in GDB output I noticed that GDB will display URLs in a few spots. This changes them to be styled. Originally I thought I'd introduce a new "url" style, but there aren't many places to use this, so I just reused filename styling instead. This patch also changes the debuginfod URL list to be printed one URL per line. I think this is probably a bit easier to read. 2022-04-01 GDB Administrator Automatic date update in version.in 2022-03-31 Simon Marchi gdb: initialize ctf_context::builder in create_partial_symtab I built a random project with -gctf, in order to test the CTF support in GDB. With my ASan/UBSan/etc-enabled build of GDB, I get: $ ./gdb --data-directory=data-directory /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0 ... Reading symbols from /tmp/babeltrace-ctf/src/lib/.libs/libbabeltrace2.so.0.0.0... /home/simark/src/binutils-gdb/gdb/ctfread.c:1545:31: runtime error: member call on misaligned address 0xbebebebebebebebe for type 'struct buildsym_compunit', which requires 8 byte alignment 0xbebebebebebebebe: note: pointer points here The 0xbebebebebebebebe value is a sign that the ctf_context::builder field is uninitialized. The problem probably goes under the radar if the field happens to be zero-initialized, because ctf_start_archive contains this code: if (ccx->builder == nullptr) { ccx->builder = new buildsym_compunit (of, of->original_name, nullptr, language_c, 0); If the field was zero-initialized (by chance), this will create a new buildsym_compunit. But if the field was purposely filled with random bytes by one of the sanitizers, we won't create a buildsym_compunit here and we'll continue with ccx->builder equal to 0xbebebebebebebebe. Fix this the easy way by initializing ccx->builder where the other ctf_context fields are initialized (yeah, this code could be made nicer C++, but I am going for the obvious fix here). With this patch, this passes cleanly on my system: $ make check TESTS="gdb.ctf/*.exp" RUNTESTFLAGS="CC_FOR_TARGET=/opt/gcc/git/bin/gcc" # of expected passes 40 ... where /opt/gcc/git/bin/gcc is a gcc with CTF support, given my system gcc does not have it. Change-Id: Idea1b0cf3e3708b72ecb16b1b60222439160f9b9 2022-03-31 Tom Tromey Remove dbx mode This patch removes gdb's dbx mode. Regression tested on x86-64 Fedora 34. 2022-03-31 H.J. Lu gdb: Consolidate 32bit-pkeys.xml and 64bit-pkeys.xml 1. Since 32bit-pkeys.xml and 64bit-pkeys.xml are identical, consolidate them into a single keys.xml. 2. Enable PKU for x32 to fix: $ gdbserver :123456 x32-program ... .../gdbserver/regcache.cc:255: A problem internal to GDBserver has been detected . Unknown register pkru requested on Tiger Lake. 2022-03-31 Simon Marchi gdb/linux-nat: remove check based on current_inferior in linux_handle_extended_wait The check removed by this patch, using current_inferior, looks wrong. When debugging multiple inferiors with the Linux native target and linux_handle_extended_wait is called, there's no guarantee about which is the current inferior. The vfork-done event we receive could be for any inferior. If the vfork-done event is for a non-current inferior, we end up wrongfully ignoring it. As a result, the core never processes a TARGET_WAITKIND_VFORK_DONE event, program_space::breakpoints_not_allowed is never cleared, and breakpoints are never reinserted. However, because the Linux native target decided to ignore the event, it resumed the thread - while breakpoints out. And that's bad. The proposed fix is to remove this check. Always report vfork-done events and let infrun's logic decide if it should be ignored. We don't save much cycles by filtering the event here. Add a test that replicates the situation described above. See comments in the test for more details. Change-Id: Ibe33c1716c3602e847be6c2093120696f2286fbf 2022-03-31 Simon Marchi gdbserver/linux: set lwp !stopped when failing to resume I see some failures, at least in gdb.multi/multi-re-run.exp and gdb.threads/interrupted-hand-call.exp. Running `stress -C $(nproc)` at the same time as the test makes those tests relatively frequent. Let's take gdb.multi/multi-re-run.exp as an example. The failure looks like this, an unexpected "no resumed": continue Continuing. No unwaited-for children left. (gdb) FAIL: gdb.multi/multi-re-run.exp: re_run_inf=2: iter=1: continue until exit The situation is: - Inferior 1 is stopped somewhere, it won't really play a role here. - Inferior 2 has 2 threads, both stopped. - We resume inferior 2, the leader thread is expected to exit, making the process exit. From GDB's perspective, a failing run looks like this: [infrun] fetch_inferior_event: enter [infrun] scoped_disable_commit_resumed: reason=handling event [infrun] do_target_wait: Found 2 inferiors, starting at #1 [infrun] random_pending_event_thread: None found. [remote] wait: enter [remote] Packet received: T0506:20dcffffff7f0000;07:20dcffffff7f0000;10:9551555555550000;thread:pae4cd.ae4cd;core:e; [remote] wait: exit [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) = [infrun] print_target_wait_results: 713933.713933.0 [Thread 713933.713933], [infrun] print_target_wait_results: status->kind = STOPPED, sig = GDB_SIGNAL_TRAP [infrun] handle_inferior_event: status->kind = STOPPED, sig = GDB_SIGNAL_TRAP [infrun] clear_step_over_info: clearing step over info [infrun] context_switch: Switching context from 0.0.0 to 713933.713933.0 [infrun] handle_signal_stop: stop_pc=0x555555555195 [infrun] start_step_over: enter [infrun] start_step_over: stealing global queue of threads to step, length = 0 [infrun] operator(): step-over queue now empty [infrun] start_step_over: exit [infrun] process_event_stop_test: no stepping, continue [remote] Sending packet: $Z0,555555555194,1#8e [remote] Packet received: OK [infrun] resume_1: step=0, signal=GDB_SIGNAL_0, trap_expected=0, current thread [713933.713933.0] at 0x555555555195 [remote] Sending packet: $QPassSignals:e;10;14;17;1a;1b;1c;21;24;25;2c;4c;97;#0a [remote] Packet received: OK [remote] Sending packet: $vCont;c:pae4cd.-1#9f [infrun] prepare_to_wait: prepare_to_wait [infrun] reset: reason=handling event [infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target extended-remote [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target extended-remote [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target extended-remote [infrun] fetch_inferior_event: exit [infrun] fetch_inferior_event: enter [infrun] scoped_disable_commit_resumed: reason=handling event [infrun] do_target_wait: Found 2 inferiors, starting at #0 [infrun] random_pending_event_thread: None found. [remote] wait: enter [remote] Packet received: N [remote] wait: exit [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) = [infrun] print_target_wait_results: -1.0.0 [process -1], [infrun] print_target_wait_results: status->kind = NO_RESUMED [infrun] handle_inferior_event: status->kind = NO_RESUMED [remote] Sending packet: $Hgp0.0#ad [remote] Packet received: OK [remote] Sending packet: $qXfer:threads:read::0,1000#92 [remote] Packet received: l\n\n\n\n\n [infrun] stop_waiting: stop_waiting [remote] Sending packet: $qXfer:threads:read::0,1000#92 [remote] Packet received: l\n\n\n\n\n [infrun] infrun_async: enable=0 [infrun] reset: reason=handling event [infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target extended-remote [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target extended-remote [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target extended-remote [infrun] fetch_inferior_event: exit We can see that we resume the inferior with vCont;c, but got NO_RESUMED. When the test passes, we get an EXITED status to indicate the process has exited. From GDBserver's point of view, it looks like this. The logs contain some logging I added and that are part of this patch. [remote] getpkt: getpkt ("vCont;c:pae4cf.-1"); [no ack sent] [threads] resume: enter [threads] thread_needs_step_over: Need step over [LWP 713931]? Ignoring, should remain stopped [threads] thread_needs_step_over: Need step over [LWP 713932]? Ignoring, should remain stopped [threads] get_pc: pc is 0x555555555195 [threads] thread_needs_step_over: Need step over [LWP 713935]? No, no breakpoint found at 0x555555555195 [threads] get_pc: pc is 0x7ffff7d35a95 [threads] thread_needs_step_over: Need step over [LWP 713936]? No, no breakpoint found at 0x7ffff7d35a95 [threads] resume: Resuming, no pending status or step over needed [threads] resume_one_thread: resuming LWP 713935 [threads] proceed_one_lwp: lwp 713935 [threads] resume_one_lwp_throw: continue from pc 0x555555555195 [threads] resume_one_lwp_throw: Resuming lwp 713935 (continue, signal 0, stop not expected) [threads] resume_one_lwp_throw: NOW ptid=713935.713935.0 stopped=0 resumed=0 [threads] resume_one_thread: resuming LWP 713936 [threads] proceed_one_lwp: lwp 713936 [threads] resume_one_lwp_throw: continue from pc 0x7ffff7d35a95 [threads] resume_one_lwp_throw: Resuming lwp 713936 (continue, signal 0, stop not expected) [threads] resume_one_lwp_throw: ptrace errno = 3 (No such process) [threads] resume: exit [threads] wait_1: enter [threads] wait_1: [] [threads] wait_for_event_filtered: waitpid(-1, ...) returned 0, ERRNO-OK [threads] resume_stopped_resumed_lwps: resuming stopped-resumed LWP LWP 713935.713936 at 7ffff7d35a95: step=0 [threads] resume_one_lwp_throw: continue from pc 0x7ffff7d35a95 [threads] resume_one_lwp_throw: Resuming lwp 713936 (continue, signal 0, stop not expected) [threads] resume_one_lwp_throw: ptrace errno = 3 (No such process) [threads] operator(): check_zombie_leaders: leader_pid=713931, leader_lp!=NULL=1, num_lwps=2, zombie=0 [threads] operator(): check_zombie_leaders: leader_pid=713935, leader_lp!=NULL=1, num_lwps=2, zombie=1 [threads] operator(): Thread group leader 713935 zombie (it exited, or another thread execd). [threads] delete_lwp: deleting 713935 [threads] wait_for_event_filtered: exit (no unwaited-for LWP) sigchld_handler [threads] wait_1: ret = null_ptid, TARGET_WAITKIND_NO_RESUMED [threads] wait_1: exit What happens is: - We resume the leader (713935) successfully. - The leader exits. - We resume the secondary thread (713936), we get ESRCH. This is expected this the leader has exited. - resume_one_lwp_throw throws, it's caught by resume_one_lwp. - resume_one_lwp checks with check_ptrace_stopped_lwp_gone that the failure can be explained by the LWP becoming zombie, and swallows the error. - Note that this means that the secondary lwp still has stopped==1. - wait_1 is called, probably because linux_process_target::resume marks the async pipe at the end. - The exit event isn't ready yet, probably because the machine is under load, so waitpid returns nothing. - check_zombie_leaders detects that the leader is zombie and deletes - We try to find a resumed (non-stopped) LWP to get an event from, there's none since the leader (that was resumed) is now deleted, and the secondary thread is still marked stopped. wait_for_event_filtered returns -1, causing wait_1 to return NO_RESUMED. What I notice here is that there is some kind of race between the availability of the process' exit notification and the call to wait_1 that results from marking the async pipe at the end of resume. I think what we want from this wait_1 invocation is to keep waiting, as we will eventually get thread exit notifications for both of our threads. The fix I came up with is to mark the secondary thread as !stopped (or resumed) when we fail to resume it. This makes wait_1 see that there is at least one resume lwp, so it won't return NO_RESUMED. I think this makes sense to consider it resumed, because we are going to receive an exit event for it. Here's the GDBserver logs with the fix applied: [threads] resume: enter [threads] thread_needs_step_over: Need step over [LWP 724595]? Ignoring, should remain stopped [threads] thread_needs_step_over: Need step over [LWP 724596]? Ignoring, should remain stopped [threads] get_pc: pc is 0x555555555195 [threads] thread_needs_step_over: Need step over [LWP 724597]? No, no breakpoint found at 0x555555555195 [threads] get_pc: pc is 0x7ffff7d35a95 [threads] thread_needs_step_over: Need step over [LWP 724598]? No, no breakpoint found at 0x7ffff7d35a95 [threads] resume: Resuming, no pending status or step over needed [threads] resume_one_thread: resuming LWP 724597 [threads] proceed_one_lwp: lwp 724597 [threads] resume_one_lwp_throw: continue from pc 0x555555555195 [threads] resume_one_lwp_throw: Resuming lwp 724597 (continue, signal 0, stop not expected) [threads] resume_one_lwp_throw: NOW ptid=724597.724597.0 stopped=0 resumed=0 [threads] resume_one_thread: resuming LWP 724598 [threads] proceed_one_lwp: lwp 724598 [threads] resume_one_lwp_throw: continue from pc 0x7ffff7d35a95 [threads] resume_one_lwp_throw: Resuming lwp 724598 (continue, signal 0, stop not expected) [threads] resume_one_lwp_throw: ptrace errno = 3 (No such process) [threads] resume: exit [threads] wait_1: enter [threads] wait_1: [] sigchld_handler [threads] wait_for_event_filtered: waitpid(-1, ...) returned 0, ERRNO-OK [threads] operator(): check_zombie_leaders: leader_pid=724595, leader_lp!=NULL=1, num_lwps=2, zombie=0 [threads] operator(): check_zombie_leaders: leader_pid=724597, leader_lp!=NULL=1, num_lwps=2, zombie=1 [threads] operator(): Thread group leader 724597 zombie (it exited, or another thread execd). [threads] delete_lwp: deleting 724597 [threads] wait_for_event_filtered: sigsuspend'ing sigchld_handler [threads] wait_for_event_filtered: waitpid(-1, ...) returned 724598, ERRNO-OK [threads] wait_for_event_filtered: waitpid 724598 received 0 (exited) [threads] filter_event: 724598 exited [threads] wait_for_event_filtered: waitpid(-1, ...) returned 724597, ERRNO-OK [threads] wait_for_event_filtered: waitpid 724597 received 0 (exited) [threads] wait_for_event_filtered: waitpid(-1, ...) returned 0, ERRNO-OK sigchld_handler [threads] wait_1: ret = LWP 724597.724598, exited with retcode 0 [threads] wait_1: exit Change-Id: Idf0bdb4cb0313f1b49e4864071650cc83fb3c100 2022-03-31 Simon Marchi gdb/testsuite/tui: implement _csi_P proc Since commit 3cd522938792 ("Change the pager to a ui_file"), I see these errors when running gdb.tui/scroll.exp: ERROR: invalid command name "_csi_P" while executing "::gdb_tcl_unknown _csi_P 2" ("uplevel" body line 1) invoked from within "uplevel 1 ::gdb_tcl_unknown $args" (procedure "::unknown" line 5) invoked from within "_csi_P 2" ("eval" body line 1) invoked from within "eval _csi_$cmd $params" It looks like GDB is emitting a CSI that it did not emit before, the "Delete character" one: https://vt100.net/docs/vt510-rm/DCH.html Implement it. Co-Authored-By: Andrew Burgess Change-Id: I5bf86b6104d51b0623a26a69df83d1ca9a4851b7 2022-03-31 Simon Marchi gdb: fix use of fprintf_filtered in top.c A race condition in how patches were pushed causes this build failure: CXX top.o /home/simark/src/binutils-gdb/gdb/top.c: In function ‘void print_gdb_configuration(ui_file*)’: /home/simark/src/binutils-gdb/gdb/top.c:1622:3: error: ‘fprintf_filtered’ was not declared in this scope; did you mean ‘printf_unfiltered’? 1622 | fprintf_filtered (stream, _("\ | ^~~~~~~~~~~~~~~~ fprintf_filtered has been removed, gdb_printf must be used now. Fix this. Change-Id: I6a172ba0d53dab2e7cc43ed0ed2696c82925245b 2022-03-31 Richard Sandiford aarch64: Relax check for RNG system registers FEAT_RNG is an optional Armv8.5-A extension, but it can be backported to earlier architectures as well. GAS previously made the RNG registers conditional on having both armv8.5-a and +rng, but only +rng should be required. This seems to be the only feature that was handled like this. opcodes/ * aarch64-opc.c (SR_RNG): Don't require V8_5. gas/ * testsuite/gas/aarch64/rng-1.s, testsuite/gas/aarch64/rng-1.d: New test. 2022-03-31 Eli Zaretskii * gdb/top.c (print_gdb_configuration): Announce --enable-threading. This includes the reporting of --enable/disable-threading as part of the GDB configuration description. 2022-03-31 Simon Marchi gdb/infrun: add reason parameter to stop_all_threads Add a "reason" parameter, only used to show in debug messages what is the reason for stopping all threads. This helped me understand the debug logs while adding some new uses of stop_all_threads, so I am proposing to merge it. Change-Id: I66c8c335ebf41836a7bc3d5fe1db92c195f65e55 2022-03-31 Simon Marchi gdb/testsuite: update copyright years in gdb.base/vfork-follow-parent.* I forgot to do this before pushing the previous commit. Change-Id: Ia343f702e8357d0fd109e9ddd778973e91862805 2022-03-31 Simon Marchi gdb: test vfork + follow-fork-mode=parent + detach-on-fork=off The particular behavior we have when using that combination of settings doesn't seem tested at all (at least, I don't find it if I grep for "Can not resume the parent process"). Add a simple test for that. Change-Id: Ib9454a615abba661b42f1b15056df73ed1bcd4c5 2022-03-31 Nick Clifton Accept the + character as part of filenames for MRI scripts. 2022-03-31 Rainer Orth Fix procfs.c compilation procfs.c doesn't compile on Solaris: /vol/src/gnu/gdb/hg/master/local/gdb/procfs.c: In member function ‘virtual bool procfs_target::info_proc(const char*, info_proc_what)’: /vol/src/gnu/gdb/hg/master/local/gdb/procfs.c:3302:3: error: ‘gdb_argv’ was not declared in this scope 3302 | gdb_argv built_argv (args); | ^~~~~~~~ /vol/src/gnu/gdb/hg/master/local/gdb/procfs.c:3303:20: error: ‘built_argv’ was not declared in this scope; did you mean ‘buildargv’? 3303 | for (char *arg : built_argv) | ^~~~~~~~~~ | buildargv Fixed by including "gdbsupport/buildargv.h". Tested on amd64-pc-solaris2.11, sparcv9-sun-solaris2.11. 2022-03-31 GDB Administrator Automatic date update in version.in 2022-03-30 Simon Marchi gdb/testsuite: add tests for Term While trying to review Andrew's patch here [1], I thought I spotted a bug in the handling of a CSI, but I had no way to know for sure. So I thought it would be useful to have unit tests for the handling of control characters and control sequences of our toy terminal implementation. It might help avoid chasing bugs in the GDB TUI when in reality it's a problem with the testsuite's terminal implementation. Add the gdb.tui/tuiterm.exp file to do that. All currently supported control sequences and characters are tested, except _csi_m (the one that handles colors and stuff). _csi_m should probably be tested too, but it will require more work. Fix a few issues that the tests spotted: - backspace: according to [3] (table 4-1), a backspace when the cursor is at the beginning of a line should have no effect. Our implementation did wrap to the end of the previous line. Change our implementation to match the doc (and the test). - insert character: this control sequence is supposed to insert blank characters, shifting all the rest of the line right. The current implementation moves N characters right, but it overwrites the characters on the right instead of shifting them. It also doesn't insert blank characters at the cursor. - Cursor down, forward, next line: off-by-one error when reaching the end of the display. - erase in display, line: off-by-one errors. - vertical line position absolute: allowed setting the cursor outside the display, when it should clamp it to the display size. I found that this web page [2] gave some good clues on the expected behavior of some control characters or sequences that some other pages didn't. [1] https://sourceware.org/pipermail/gdb-patches/2022-March/186433.html [2] https://docs.microsoft.com/en-us/windows/console/console-virtual-terminal-sequences [3] https://vt100.net/docs/vt510-rm/chapter4.html#S4.3.3 Change-Id: Iab4141fdcfb7459d1b7c45cc63bd1fcb50a78d5d 2022-03-30 Tom Tromey Only allow QUIT on the main thread Pedro pointed out that gdb worker threads should not react to quits. While I don't think that the new DWARF reader can call QUIT from a worker thread (and I don't think the existing minsym threading code can either), it seems safest to address this before checking in the new code. This patch arranges for the QUIT macro to only work on the main thread. 2022-03-30 Tom Tromey Use gdb_printf and gdb_vprintf in more places Luis pointed out that I missed a spot in the gdb_printf conversion -- namely aarch64-nat.c. While looking at this, I found another spot in darwin-nat.c that I also missed. I can't build either of these, but I think this patch should fix the problems. Consolidate definition of current_directory I noticed that both gdbserver and gdb define current_directory. However, as it is referenced by gdbsupport, it seemed better to define it there as well. This patch also moves the declaration to pathstuff.h. Tested by rebuilding. 2022-03-30 Tom Tromey Decode "dynamic" interface types in Ada In Ada, if a class implements an interface and has a dynamic superclass, then the "offset to top" -- the offset that says how to turn a pointer to the interface into a pointer to the whole object -- is stored in the object itself. This patch changes GDB to understand this. Because this only touches Ada code, and because Joel already reviewed it internally, I am checking it in. 2022-03-30 Jeff Law Fix for MUL instruction on the v850 * sim/v850/simops.c (Multiply64): Properly test if we need to negate either of the operands. * sim/testsuite/v850/mul.cgs: New test. 2022-03-30 GDB Administrator Automatic date update in version.in 2022-03-29 Tom Tromey Remove two unused hooks I noticed that a couple of deprecated hooks aren't ever called, so they can't really be used by Insight. This patch removes them entirely. I checked the Insight sources, and these aren't mentioned there, either. 2022-03-29 Tom Tromey Remove unnecessary calls to wrap_here and gdb_flush Various spots in gdb currently know about the wrap buffer, and so are careful to call wrap_here to be certain that all output has been flushed. Now that the pager is just an ordinary stream, this isn't needed, and a simple call to gdb_flush is enough. Similarly, there are places where gdb prints to gdb_stderr, but first flushes gdb_stdout. stderr_file already flushes gdb_stdout, so these aren't needed. 2022-03-29 Tom Tromey Minor comment updates in utils.h This patch updates some comments in utils.h to more closely reflect the new reality. Remove vfprintf_styled Nothing calls vfprintf_styled any more, so remove it. Remove ui_out_flag::unfiltered_output There is no longer any need for ui_out_flag::unfiltered_output -- nothing ever sets this flag. This used to be needed to make the _unfiltered output work, but now only printf_unfiltered can be used, and it uses the puts_unfiltered method. This patch removes the flag and the dead code. Rename fprintf_symbol_filtered fprintf_symbol_filtered is misnamed, because whether filtering happens is now up to the stream. This renames it to fprintf_symbol, which isn't a great name (the first "f" doesn't mean much and the second one is truly meaningless here), but "print_symbol" was already taken. Rename puts_filtered_tabular puts_filtered_tabular is now misnamed, because whether filtering happens is now up to the stream. So, rename it. (This function is pretty weird, and should probably be rewritten to avoid using the chars_printed global, and moved into objc-lang.c. However, I haven't done so.) Rename print_spaces_filtered print_spaces_filtered is now misnamed, because whether filtering happens is up to the stream. So, rename it. Unify gdb printf functions Now that filtered and unfiltered output can be treated identically, we can unify the printf family of functions. This is done under the name "gdb_printf". Most of this patch was written by script. Unify gdb putc functions Now that filtered and unfiltered output can be treated identically, we can unify the putc family of functions. This is done under the name "gdb_putc". Most of this patch was written by script. Unify gdb puts functions Now that filtered and unfiltered output can be treated identically, we can unify the puts family of functions. This is done under the name "gdb_puts". Most of this patch was written by script. Unify vprintf functions Now that filtered and unfiltered output can be treated identically, we can unify the vprintf family of functions: vprintf_filtered, vprintf_unfiltered, vfprintf_filtered and vfprintf_unfiltered. (For the gdb_stdout variants, recall that only printf_unfiltered gets truly unfiltered output at this point.) This removes one such function and renames the remaining two to "gdb_vprintf". All callers are updated. Much of this patch was written by script. Remove fputs_styled_unfiltered fputs_styled_unfiltered is only called from cli_ui_out, so remove it. This area will be further simplified in future patches. 2022-03-29 Tom Tromey Change the pager to a ui_file This rewrites the output pager as a ui_file implementation. A new header is introduced to declare the pager class. The implementation remains in utils.c for the time being, because there are some static globals there that must be used by this code. (This could be cleaned up at some future date.) I went through all the text output in gdb to ensure that this change should be ok. There are a few cases: * Any existing call to printf_unfiltered is required to be avoid the pager. This is ensured directly in the implementation. * All remaining calls to the f*_unfiltered functions -- the ones that take an explicit ui_file -- either send to an unfiltered stream (e.g., gdb_stderr), which is obviously ok; or conditionally send to gdb_stdout I investigated all such calls by searching for: grep -e '\bf[a-z0-9_]*_unfiltered' *.[chyl] */*.[ch] | grep -v gdb_stdlog | grep -v gdb_stderr This yields a number of candidates to check. * The breakpoint _print_recreate family, and save_trace_state_variables. These are used for "save" commands and so are fine. * Things printing to a temporary stream. Obviously ok. * Disassembly selftests. * print_gdb_help - this is non-obvious, but ok because paging isn't yet enabled at this point during startup. * serial.c - doens't use gdb_stdout * The code in compile/. This is all printing to a file. * DWARF DIE dumping - doesn't reference gdb_stdout. * Calls to the _filtered form -- these are all clearly ok, because if they are using gdb_stdout, then filtering will still apply; and if not, then filtering never applied and still will not. Therefore, at this point, there is no longer any distinction between all the other _filtered and _unfiltered calls, and they can be unified. In this patch, take special note of the vfprintf_maybe_filtered and ui_file::vprintf change. This is one instance of the above idea, erasing the distinction between filtered and unfiltered -- in this part of the change, the "unfiltered_output" flag is never passe to cli_ui_out. Subsequent patches will go much further in this direction. Also note the can_emit_style_escape changes in ui-file.c. Checking against gdb_stdout or gdb_stderr was always a bit of a hack; and now it is no longer needed, because this is decision can be more fully delegated to the particular ui_file implementation. ui_file::can_page is removed, because this patch removed the only call to it. I think this is the main part of fixing PR cli/7234. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7234 2022-03-29 Tom Tromey Remove vfprintf_styled_no_gdbfmt This removes vfprintf_styled_no_gdbfmt, inlining it at the sole point of call. Add style-escape methods to ui_file This adds emit_style_escape and reset_style methods to ui_file. These aren't used yet, but they will be once the pager is converted to be a ui_file subclass. Add puts_unfiltered method to ui_file When the pager is rewritten as a ui_file, gdb will still need a way to bypass the filtering. After examining a few approaches, I chose this patch, which adds a puts_unfiltered method to ui_file. For most implementations of ui_file, this will just delegate to puts. This patch also switches printf_unfiltered to use the new method. Only have one API for unfiltered output At the end of this series, the use of unfiltered output will be very restricted -- only places that definitely need it will use it. To this end, I thought it would be good to reduce the number of _unfiltered APIs that are exposed. This patch changes gdb so that only printf_unfiltered exists. (After this patch, the f* variants still exist as well, but those will be removed later.) 2022-03-29 Tom Tromey Remove some uses of printf_unfiltered A number of spots call printf_unfiltered only because they are in code that should not be interrupted by the pager. However, I believe these cases are all handled by infrun's blanket ban on paging, and so can be converted to the default (_filtered) API. After this patch, I think all the remaining _unfiltered calls are ones that really ought to be. A few -- namely in complete_command -- could be replaced by a scoped assignment to pagination_enabled, but for the remainder, the code seems simple enough like this. 2022-03-29 Tom Tromey Use unfiltered output in annotate.c It seems to me that annotations should not be filtered. While it might be weird for an annotation-based UI to use the pager, it's not, I think, out of the question. This patch makes this change. 2022-03-29 Tankut Baris Aktemur Aleksandar Paunovic gdb/remote: use current_inferior in read_ptid if multi-process not supported When parsing the ptid out of a reply package, if the multi-process extensions are not supported, use current_inferior's pid as the pid of the reported thread, instead of inferior_ptid. This is needed because the inferior_ptid may be null_ptid although a legit context exists, due to a prior context switch via switch_to_inferior_no_thread. Below is a scenario that illustrates what could go wrong. First, setup a multi-target scenario. This is needed, because in a multi-target setting, the inferior_ptid is cleared out before waiting on targets. The second inferior below sits on top of a remote target. Multi-process packets are disabled. $ # First, spawn a process with PID 26253 to attach to later. $ gdb-up a.out Reading symbols from a.out... (gdb) maint set target-non-stop on (gdb) set remote multiprocess-feature-packet off (gdb) start ... (gdb) add-inferior -no-connection [New inferior 2] Added inferior 2 (gdb) inferior 2 [Switching to inferior 2 [] ()] (gdb) target extended-remote | gdbserver --multi - Remote debugging using | gdbserver --multi - Remote debugging using stdio (gdb) attach 26253 Attaching to Remote target Attached; pid = 26253 [New Thread 26253] [New inferior 3] Reading /tmp/a.out from remote target... ... [New Thread 26253] ... Reading /usr/local/lib/debug/....debug from remote target... >>> GDB seems to hang here. After attaching to a process and reading some library files, GDB seems to hang. One interesting thing to note is that [New Thread 26253] appears twice. We also see [New inferior 3] Running the same scenario with "debug infrun on" reveals more details. ... (gdb) attach 26253 [infrun] scoped_disable_commit_resumed: reason=attaching Attaching to Remote target Attached; pid = 26253 [New Thread 26253] [infrun] infrun_async: enable=1 [infrun] attach_command: immediately after attach: [infrun] attach_command: thread 26253.26253.0, executing = 1, resumed = 0, state = RUNNING [infrun] clear_proceed_status_thread: 26253.26253.0 [infrun] reset: reason=attaching [infrun] maybe_set_commit_resumed_all_targets: not requesting commit-resumed for target native, no resumed threads [infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target extended-remote [infrun] fetch_inferior_event: enter [infrun] scoped_disable_commit_resumed: reason=handling event [infrun] do_target_wait: Found 2 inferiors, starting at #1 [infrun] random_pending_event_thread: None found. [infrun] print_target_wait_results: target_wait (-1.0.0 [Thread 0], status) = [infrun] print_target_wait_results: 26253.26253.0 [Thread 26253], [infrun] print_target_wait_results: status->kind = STOPPED, sig = GDB_SIGNAL_0 [infrun] handle_inferior_event: status->kind = STOPPED, sig = GDB_SIGNAL_0 [infrun] start_step_over: enter [infrun] start_step_over: stealing global queue of threads to step, length = 0 [infrun] operator(): step-over queue now empty [infrun] start_step_over: exit [infrun] context_switch: Switching context from 0.0.0 to 26253.26253.0 [infrun] handle_signal_stop: stop_pc=0x7f849d8cf151 [infrun] stop_waiting: stop_waiting [infrun] stop_all_threads: starting [infrun] stop_all_threads: pass=0, iterations=0 [New inferior 3] Reading /tmp/a.out from remote target... warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead. Reading /tmp/a.out from remote target... Reading symbols from target:/tmp/a.out... [New Thread 26253] [infrun] stop_all_threads: 4723.4723.0 not executing [infrun] stop_all_threads: 26253.26253.0 not executing [infrun] stop_all_threads: 42000.26253.0 executing, need stop [infrun] print_target_wait_results: target_wait (-1.0.0 [Thread 0], status) = [infrun] print_target_wait_results: -1.0.0 [Thread 0], [infrun] print_target_wait_results: status->kind = IGNORE [infrun] print_target_wait_results: target_wait (-1.0.0 [Thread 0], status) = [infrun] print_target_wait_results: -1.0.0 [Thread 0], [infrun] print_target_wait_results: status->kind = IGNORE GDB tried to stop Thread 42000.26253.0, which does not exist, and we are waiting for a stop event that will never happen. The PID in '42000.26253.0', namely 42000, is the PID of magic_null_ptid. It comes from gdb/remote.c:read_ptid: /* Since the stub is not sending a process id, then default to what's in inferior_ptid, unless it's null at this point. If so, then since there's no way to know the pid of the reported threads, use the magic number. */ if (inferior_ptid == null_ptid) pid = magic_null_ptid.pid (); else pid = inferior_ptid.pid (); if (obuf) *obuf = pp; return ptid_t (pid, tid); Because multi-process was turned off, GDB did not parse an explicitly specified PID. Furthermore, inferior_ptid == null_ptid, and eventually GDB picked the PID from magic_null_ptid. If target-non-stop is not turned on at the beginning, the same bug reveals itself as a duplicated thread as shown below. # Same setup as above, without 'maint set target-non-stop on'. ... (gdb) attach 26253 Attaching to Remote target Attached; pid = 26253 [New inferior 3] ... [New Thread 26253] ... (gdb) info threads Id Target Id Frame 1.1 process 13517 "a.out" main () at test.c:3 * 2.1 Thread 26253 "a.out" 0x00007f12750c5151 in read () from target:/lib/x86_64-linux-gnu/libc.so.6 3.1 Thread 26253 "a.out" Remote 'g' packet reply is too long (expected 560 bytes, got 2496 bytes): 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 (gdb) Fix the problem by preferring current_inferior()'s pid instead of magic_null_ptid. Regression-tested on X86-64 Linux. 2022-03-29 Andrew Burgess gdb/testsuite: fix test failure when building against readline v7 The test added in the commit: commit a6b413d24ccc5d76179bab866834e11fd6fec294 Date: Fri Mar 11 14:44:03 2022 +0000 gdb: work around prompt corruption caused by bracketed-paste-mode Was not written with readline 7 in mind, only readline 8+. Between readline 7 and 8 the escape sequence used to disable bracketed paste mode changed, an additional '\r' character was added to the end. In fact, it was the addition of this '\r' character that triggered the issue for which the above commit is part of the solution. Anyway, the test tries to spot the case where the output from GDB is not perfect, but does have the above work around applied. However, the pattern in the test assumes that the problematic '\r' will be present, and this is only true for readline 8+. With readline 7 the test was failing. In this commit I generalise the pattern a little so that the test will still KFAIL with readline 7. It's a little unfortunate that the test is KFAILing with readline 7, as without the problematic '\r' there's actually no reason that GDB couldn't "do the right thing" in this case, in which case, the test would PASS, but that would require changes within GDB itself. My preference then is that initially we patch the test to get it KFAILing, then in a separate commit I can modify GDB so that it can PASS with readline 7. 2022-03-29 Andrew Burgess gdb/testsuite: fix copy & paste error in gdb.python/py-format-address.exp The test gdb.python/py-format-address.exp, added in commit: commit 25209e2c6979c3838e14e099f0333609810db280 Date: Sat Oct 23 09:59:25 2021 +0100 gdb/python: add gdb.format_address function included 3 copy & paste errors where the wrong address was used in the expected output patterns. The test compiles two almost identical test binaries (one function changes its name, that's the only difference), two inferiors are created, each inferior using one of the test binaries. We then take the address of the name changing function in both inferiors ('foo' in inferior 1 and 'bar' in inferior 2) and the tests are carried out using these addresses. What we're checking for is that symbols 'foo' and 'bar' show up in the correct inferior, and that (as this test is for a Python API feature), the user can have one inferior selected, but ask about the other inferior, and see the correct symbol in the result. The hope is that the two binaries will be laid out identically by the compiler, and that 'foo' and 'bar' will be at the same address. This is fine, unless the executable is compiled as PIE (position independent executable), in which case there is a problem. The problem is that though inferior 1 is set running, the inferior 2 never is. If the executables are compiled as PIE, then the address in the inferior 2 will not have been resolved, while the address in the inferior 1 will have been, and so the two addresses we use in the tests will be different. This issue was reported here: https://sourceware.org/pipermail/gdb-patches/2022-March/186911.html The first part of the fix is to use the correct address variable in the expected output patterns, with this change the tests pass even when the executables are compiled as PIE. A second part of this fix is to pass the 'nopie' option when we compile the tests, this should ensure that the address obtained in inferior 2 is the same as the address from inferior 1, which makes the test more useful. 2022-03-29 Andrew Burgess gdb/mi: fix use after free of frame_info causing spurious notifications In commit: commit a2757c4ed693cef4ecc4dcdcb2518353eb6b3c3f Date: Wed Mar 16 15:08:22 2022 +0000 gdb/mi: consistently notify user when GDB/MI client uses -thread-select Changes were made to GDB to address some inconsistencies in when notifications are sent from a MI terminal to a CLI terminal (when multiple terminals are in use, see new-ui command). Unfortunately, in order to track when the currently selected frame has changed, that commit grabs a frame_info pointer before and after an MI command has executed, and compares the pointers to see if the frame has changed. This is not safe. If the frame cache is deleted for any reason then the frame_info pointer captured before the command started, is no longer valid, and any comparisons based on that pointer are undefined. This was leading to random test failures for some folk, see: https://sourceware.org/pipermail/gdb-patches/2022-March/186867.html This commit changes GDB so we no longer hold frame_info pointers, but instead store the frame_id and frame_level, this is safe even when the frame cache is flushed. 2022-03-29 Jan Beulich bfd/Dwarf2: gas doesn't mangle names Include the language identifier emitted by gas in the set of ones where no mangled names are expected. Even if there could be "hand-mangled" names, gas doesn't emit DW_AT_linkage_name in the first place. bfd/Dwarf2: make find-nearest-line returned function name consistent Prior to entering the enclosing "else if()" the earlier associated if() checks function->is_linkage and, if set, uses function->name. The comment in patch context precedes (and explains) the setting function->is_linkage. Yet with the flag set, we should then also return the function name, just like said earlier if() would do when we came here a 2nd time for the same "addr". And indeed passing the same address twice on addr2line's command line would resolve the function for the 2nd instance, but not for the 1st (if this code path is taken). (This, obviously, is particularly relevant when there's no ELF symbol table in the first place, like would be the case - naturally - in PE/COFF binaries, for example.) gas/Dwarf: special-case .linefile only for macros Restrict the PR gas/16908 workaround to just macros, matching the original intention as well as the comment there. For constructs like .irp or .rept the reasoning doesn't apply, as there's no separate "invocation" point which may be of interest to record (for, as said there, short macros). 2022-03-29 Jan Beulich RISC-V: correct FCVT.Q.L[U] While the spec isn't explicit about this, it pointing out the similarity with the D extension ought to extend to the ignoring of a meaningless rounding mode: "Note FCVT.D.W[U] always produces an exact result and is unaffected by rounding mode." Hence the chosen encodings also ought to match. Note that to avoid breaking existing code the forms with a 3rd operand are not removed, which means there continues to be a difference to FCVT.D.W[U]. 2022-03-29 Mike Frysinger sim: add arch/.gdbinit stub scripts Make it easy to load the common gdbinit script even when running in the arch/ subdir instead of the top-level sim dir. 2022-03-29 Alan Modra asan: heap buffer overflow in pa_chk_field_selector The buffer overflow showed up running the gas "all macro" test. PR 29005 * config/tc-hppa.c (pa_chk_field_selector): Don't read past end of line. 2022-03-29 GDB Administrator Automatic date update in version.in 2022-03-28 Tom Tromey Add Rust parser check for end of expression I noticed that "print 5," passed in Rust -- the parser wasn't checking that the entire input was used. This patch fixes the problem. This in turn pointed out another bug in the parser, namely that it didn't lex the next token after handling a string token. This is also fixed here. 2022-03-28 Tom Tromey Switch gdb_stdlog to use timestamped_file Currently, timestamps for logging are done by looking for the use of gdb_stdlog in vfprintf_unfiltered. This seems potentially buggy, in that during logging or other redirects (like execute_fn_to_ui_file) we might have gdb_stdout==gdb_stdlog and so, conceivably, wind up with timestamps in a log when they were not desired. It seems better, instead, for timestamps to be a property of the ui_file itself. This patch changes gdb to use the new timestamped_file for gdb_stdlog where appropriate, and removes the special case from vfprintf_unfiltered. Note that this may somewhat change the output in some cases -- in particular, when going through execute_fn_to_ui_file (or the _string variant), timestamps won't be emitted. This could be fixed in those functions, but it wasn't clear to me whether this is really desirable. Note also that this changes the TUI to send gdb_stdlog to gdb_stderr. I imagine that the previous use of gdb_stdout here was inadvertent. (And in any case it probably doesn't matter.) 2022-03-28 Tom Tromey Add new timestamped_file class This adds a "timestamped_file" subclass of ui_file. This class adds a timestamp to its output when appropriate. That is, it follows the rule already used in vfprintf_unfiltered of adding a timestamp at most once per write. The new class is not yet used. 2022-03-28 Tom Tromey Use unique_ptr in CLI logging code This changes the CLI logging code to avoid manual memory management (to the extent possible) by using unique_ptr in a couple of spots. This will come in handy in a later patch. 2022-03-28 Tom Tromey Simplify the CLI set_logging logic The CLI's set_logging logic seemed unnecessarily complicated to me. This patch simplifies it, with an eye toward changing it to use RAII objects in a subsequent patch. I did not touch the corresponding MI code. That code seems incorrect (nothing ever uses raw_stdlog, and nothing ever sets saved_raw_stdlog). I didn't attempt to fix this, because I question whether this is even useful for MI. 2022-03-28 Tom Tromey Handle multiple addresses in call_site_target A large customer program has a function that is partitioned into hot and cold parts. A variable in a callee of this function is described using DW_OP_GNU_entry_value, but gdb gets confused when trying to find the caller. I tracked this down to dwarf2_get_pc_bounds interpreting the function's changes so that the returned low PC is the "wrong" function. Intead, when processing DW_TAG_call_site, the low PC of each range in DW_AT_ranges should be preserved in the call_site_target. This fixes the variable lookup in the test case I have. I didn't write a standalone test for this as it seemed excessively complicated. 2022-03-28 Tom Tromey Change call_site_target to iterate over addresses In order to handle the case where a call site target might refer to multiple addresses, we change the code to use a callback style. Any spot using call_site_target::address now passes in a callback function that may be called multiple times. 2022-03-28 Tom Tromey Change call_site_find_chain_1 to work recursively call_site_find_chain_1 has a comment claiming that recursive calls would be too expensive. However, I doubt this is so expensive; and furthermore the explicit state management approach here is difficult both to understand and to modify. This patch changes this code to use explicit recursion, so that a subsequent patch can generalize this code without undue trauma. Additionally, I think this patch detects a latent bug in the recursion code. (It's hard for me to be completely certain.) The bug is that when a new target_call_site is entered, the code does: if (target_call_site) { if (addr_hash.insert (target_call_site->pc ()).second) { /* Successfully entered TARGET_CALL_SITE. */ chain.push_back (target_call_site); break; } } Here, if entering the target_call_site fails, then any tail_call_next elements in this call site are not visited. However, if this code does happen to enter a call site, then the tail_call_next elements will be visited during backtracking. This applies when doing the backtracking as well -- it will only continue through a given chain as long as each element in the chain can successfully be visited. I'd appreciate some review of this. If this behavior is intentional, it can be added to the new implementation. 2022-03-28 Tom Tromey Constify chain_candidate While investigating this bug, I wasn't sure if chain_candidate might update 'chain'. I changed it to accept a const reference, making it clear that it cannot. This simplifies the code a tiny bit as well. Make call_site_target members private This makes the data members of call_site_target 'private'. This lets us remove most of its public API. call_site_to_target_addr is changed to be a method of this type. This is a preparatory refactoring for the fix at the end of this series. Change call_site_target to use custom type and enum call_site_target reuses field_loc_kind and field_location. However, it has never used the full range of the field_loc_kind enum. In a subsequent patch, I plan to add a new 'kind' here, so it seemed best to avoid this reuse and instead introduce new types here. 2022-03-28 GDB Administrator Automatic date update in version.in 2022-03-27 GDB Administrator Automatic date update in version.in 2022-03-26 Tom Tromey Remove an unused declaration from value.h value.h has a declaration of value_print_array_elements that is incorrect. In C, this would have been an error, but in C++ this is a declaration of an overload that is neither defined nor used. This patch removes the declaration. 2022-03-26 GDB Administrator Automatic date update in version.in 2022-03-25 Nick Alcock libtool.m4: fix the NM="/nm/over/here -B/option/with/path" case My previous nm patch handled all cases but one -- if the user set NM in the environment to a path which contained an option, libtool's nm detection tries to run nm against a copy of nm with the options in it: e.g. if NM was set to "nm --blargle", and nm was found in /usr/bin, the test would try to run "/usr/bin/nm --blargle /usr/bin/nm --blargle". This is unlikely to be desirable: in this case we should run "/usr/bin/nm --blargle /usr/bin/nm". Furthermore, as part of this nm has to detect when the passed-in $NM contains a path, and in that case avoid doing a path search itself. This too was thrown off if an option contained something that looked like a path, e.g. NM="nm -B../prev-gcc"; libtool then tries to run "nm -B../prev-gcc nm" which rarely works well (and indeed it looks to see whether that nm exists, finds it doesn't, and wrongly concludes that nm -p or whatever does not work). Fix all of these by clipping all options (defined as everything including and after the first " -") before deciding whether nm contains a path (but not using the clipped value for anything else), and then removing all options from the path-modified nm before looking to see whether that nm existed. NM=my-nm now does a path search and runs e.g. /usr/bin/my-nm -B /usr/bin/my-nm NM=/usr/bin/my-nm now avoids a path search and runs e.g. /usr/bin/my-nm -B /usr/bin/my-nm NM="my-nm -p../wombat" now does a path search and runs e.g. /usr/bin/my-nm -p../wombat -B /usr/bin/my-nm NM="../prev-binutils/new-nm -B../prev-gcc" now avoids a path search: ../prev-binutils/my-nm -B../prev-gcc -B ../prev-binutils/my-nm This seems to be all combinations, including those used by GCC bootstrap (which, before this commit, fails to bootstrap when configured --with-build-config=bootstrap-lto, because the lto plugin is now using --export-symbols-regex, which requires libtool to find a working nm, while also using -B../prev-gcc to point at the lto plugin associated with the GCC just built.) Regenerate all affected configure scripts. * libtool.m4 (LT_PATH_NM): Handle user-specified NM with options, including options containing paths. 2022-03-25 Alan Modra Re: gas/Dwarf: improve debug info generation from .irp and alike blocks am33_2.0-linux is a mn10300 target. * testsuite/gas/elf/dwarf-5-irp.d: xfail am33. 2022-03-25 GDB Administrator Automatic date update in version.in 2022-03-24 Aaron Merey Remove download size from debuginfod progress messages if unavailable Currently debuginfod progress update messages include the size of each download: Downloading 7.5 MB separate debug info for /lib/libxyz.so.0 This value originates from the Content-Length HTTP header of the transfer. However this header is not guaranteed to be present for each download. This can happen when debuginfod servers compress files on-the-fly at the time of transfer. In this case gdb wrongly prints "-0.00 MB" as the size. This patch removes download sizes from progress messages when they are not available. It also removes usage of the progress bar until a more thorough reworking of progress updating is implemented. [1] [1] https://sourceware.org/pipermail/gdb-patches/2022-February/185798.html 2022-03-24 Reuben Thomas sim: fix a comment typo in sim-load.c Fix a typo where the documentation refers to a function parameter by the wrong name. Change-Id: I99494efe62cd4aa76fb78a0bd5da438d35740ebe 2022-03-24 Reuben Thomas sim: fix “alligned” typos Change-Id: Ifd574e38524dd4f1cf0fc003e0c5c7499abc84a0 2022-03-24 Jan Beulich x86: mention dropped L1OM/K1OM support in ld/ as well This amends e961c696dcb2 ("x86: drop L1OM/K1OM support from ld"). Also remove the marker that I mistakenly added in c085ab00c7b2 ("x86: drop L1OM/K1OM support from gas"). 2022-03-24 Simon Marchi gdb/testsuite: remove gdb.python/pretty-print-call-by-hand.exp This test was added without a corresponding fix, with some setup_kfails. However, it results in UNRESOLVED results when GDB is built with ASan. ERROR: GDB process no longer exists GDB process exited with wait status 1946871 exp7 0 1 UNRESOLVED: gdb.python/pretty-print-call-by-hand.exp: frame print: backtrace test (PRMS gdb/28856) Remove the test from the tree, I'll attach it to the Bugzilla bug instead [1]. [1] https://sourceware.org/bugzilla/show_bug.cgi?id=28856 Change-Id: Id95d8949fb8742874bd12aeac758aa4d7564d678 2022-03-24 Jan Beulich x86: drop L1OM/K1OM support from ld This was only rudimentary support anyway; none of the sub-architecture specific insns were ever supported. x86: drop L1OM special case from disassembler There wasn't any real support anyway: None of the sub-architecture specific insns were ever supported. 2022-03-24 Jan Beulich MAINTAINERS: add myself I much appreciate Nick offering this role to me. Nevertheless there's still a lot for me to learn here. At this occasion also update my email address in the pre-existing, much more narrow entry. 2022-03-24 GDB Administrator Automatic date update in version.in 2022-03-23 Andrew Burgess gdb/testsuite: address test failures in gdb.mi/mi-multi-commands.exp The gdb.mi/mi-multi-commands.exp test was added in commit: commit d08cbc5d3203118da5583296e49273cf82378042 Date: Wed Dec 22 12:57:44 2021 +0000 gdb: unbuffer all input streams when not using readline And then tweaked in commit: commit 144459531dd68a1287905079aaa131b777a8cc82 Date: Mon Feb 7 20:35:58 2022 +0000 gdb/testsuite: relax pattern in new gdb.mi/mi-multi-commands.exp test The second of these commits was intended to address periodic test failures that I was seeing, and this change did fix some problems, but, unfortunately, introduced other issues. The problem is that the test relies on sending two commands to GDB in a single write. As the characters that make these two commands arrive they are echoed to GDB's console. However, there is a race between how quickly the characters are echoed and how quickly GDB decides to act on the incoming commands. Usually, both commands are echoed in full before GDB acts on the first command, but sometimes this is not the case, and GDB can execute the first command before both commands are fully echoed to the console. In this case, the output of the first command will be mixed in with the echoing of the second command. This mixing of the command echoing and the first command output is what was causing failures in the original version of the test. The second commit relaxed the expected output pattern a little, but was still susceptible to failures, so this commit further relaxes the pattern. Now, we look for the first command output with no regard to what is before, or after the command. Then we look for the first mi prompt to indicate that the first command has completed. I believe that this change should make the test more stable than it was before. 2022-03-23 Nick Alcock libctf: add LIBCTF_WRITE_FOREIGN_ENDIAN debugging option libctf has always handled endianness differences by detecting foreign-endian CTF dicts on the input and endian-flipping them: dicts are always written in native endianness. This makes endian-awareness very low overhead, but it means that the foreign-endian code paths almost never get routinely tested, since "make check" usually reads in dicts ld has just written out: only a few corrupted-CTF tests are actually in fixed endianness, and even they only test the foreign- endian code paths when you run make check on a big-endian machine. (And the fix is surely not to add more .s-based tests like that, because they are a nightmare to maintain compared to the C-code-based ones.) To improve on this, add a new environment variable, LIBCTF_WRITE_FOREIGN_ENDIAN, which causes libctf to unconditionally endian-flip at ctf_write time, so the output is always in the wrong endianness. This then tests the foreign-endian read paths properly at open time. Make this easier by restructuring the writeout code in ctf-serialize.c, which duplicates the maybe-gzip-and-write-out code three times (once for ctf_write_mem, with thresholding, and once each for ctf_compress_write and ctf_write just so those can avoid thresholding and/or compression). Instead, have the latter two call the former with thresholds of 0 or (size_t) -1, respectively. The endian-flipping code itself gains a bit of complexity, because one single endian-flipper (flip_types) was assuming the input to be in foreign-endian form and assuming it could pull things out of the input once they had been flipped and make sense of them. At the cost of a few lines of duplicated initializations, teach it to read before flipping if we're flipping to foreign-endianness instead of away from it. libctf/ * ctf-impl.h (ctf_flip_header): No longer static. (ctf_flip): Likewise. * ctf-open.c (flip_header): Rename to... (ctf_flip_header): ... this, now it is not private to one file. (flip_ctf): Rename... (ctf_flip): ... this too. Add FOREIGN_ENDIAN arg. (flip_types): Likewise. Use it. (ctf_bufopen_internal): Adjust calls. * ctf-serialize.c (ctf_write_mem): Add flip_endian path via a newly-allocated bounce buffer. (ctf_compress_write): Move below ctf_write_mem and reimplement in terms of it. (ctf_write): Likewise. (ctf_gzwrite): Note that this obscure writeout function does not support endian-flipping. 2022-03-23 Nick Alcock libctf, ld: diagnose corrupted CTF header cth_strlen The last section in a CTF dict is the string table, at an offset represented by the cth_stroff header field. Its length is recorded in the next field, cth_strlen, and the two added together are taken as the size of the CTF dict. Upon opening a dict, we check that none of the header offsets exceed this size, and we check when uncompressing a compressed dict that the result of the uncompression is the same length: but CTF dicts need not be compressed, and short ones are not. Uncompressed dicts just use the ctf_size without checking it. This field is thankfully almost unused: it is mostly used when reserializing a dict, which can't be done to dicts read off disk since they're read-only. However, when opening an uncompressed foreign-endian dict we have to copy it out of the mmaped region it is stored in so we can endian- swap it, and we use ctf_size when doing that. When the cth_strlen is corrupt, this can overrun. Fix this by checking the ctf_size in all uncompressed cases, just as we already do in the compressed case. Add a new test. This came to light because various corrupted-CTF raw-asm tests had an incorrect cth_strlen: fix all of them so they produce the expected error again. libctf/ PR libctf/28933 * ctf-open.c (ctf_bufopen_internal): Always check uncompressed CTF dict sizes against the section size in case the cth_strlen is corrupt. ld/ PR libctf/28933 * testsuite/ld-ctf/diag-strlen-invalid.*: New test, derived from diag-cttname-invalid.s. * testsuite/ld-ctf/diag-cttname-invalid.s: Fix incorrect cth_strlen. * testsuite/ld-ctf/diag-cttname-null.s: Likewise. * testsuite/ld-ctf/diag-cuname.s: Likewise. * testsuite/ld-ctf/diag-parlabel.s: Likewise. * testsuite/ld-ctf/diag-parname.s: Likewise. 2022-03-23 Nick Alcock include, libctf, ld: extend variable section to contain functions too The CTF variable section is an optional (usually-not-present) section in the CTF dict which contains name -> type mappings corresponding to data symbols that are present in the linker input but not in the output symbol table: the idea is that programs that use their own symbol- resolution mechanisms can use this section to look up the types of symbols they have found using their own mechanism. Because these removed symbols (mostly static variables, functions, etc) all have names that are unlikely to appear in the ELF symtab and because very few programs have their own symbol-resolution mechanisms, a special linker flag (--ctf-variables) is needed to emit this section. Historically, we emitted only removed data symbols into the variable section. This seemed to make sense at the time, but in hindsight it really doesn't: functions are symbols too, and a C program can look them up just like any other type. So extend the variable section so that it contains all static function symbols too (if it is emitted at all), with types of kind CTF_K_FUNCTION. This is a little fiddly. We relied on compiler assistance for data symbols: the compiler simply emits all data symbols twice, once into the symtypetab as an indexed symbol and once into the variable section. Rather than wait for a suitably adjusted compiler that does the same for function symbols, we can pluck unreported function symbols out of the symtab and add them to the variable section ourselves. While we're at it, we do the same with data symbols: this is redundant right now because the compiler does it, but it costs very little time and lets the compiler drop this kludge and save a little space in .o files. include/ * ctf.h: Mention the new things we can see in the variable section. ld/ * testsuite/ld-ctf/data-func-conflicted-vars.d: New test. libctf/ * ctf-link.c (ctf_link_deduplicating_variables): Duplicate symbols into the variable section too. * ctf-serialize.c (symtypetab_delete_nonstatic_vars): Rename to... (symtypetab_delete_nonstatics): ... this. Check the funchash when pruning redundant variables. (ctf_symtypetab_sect_sizes): Adjust accordingly. * NEWS: Describe this change. 2022-03-23 Nick Alcock ld, testsuite: improve CTF-availability test The test for -gctf support in the compiler is used to determine when to run the ld-ctf tests and most of those in libctf. Unfortunately, because it uses check_compiler_available and compile_one_cc, it will fail whenever the compiler emits anything on stderr, even if it actually does support CTF perfectly well. So, instead, ask the compiler to emit assembler output and grep it for references to ".ctf": this is highly unlikely to be present if the compiler does not support CTF. (This will need adjusting when CTF grows support for non-ELF platforms that don't dot-prepend their section names, but right now the linker doesn't link CTF on any such platforms in any case.) With this in place we can do things like run all the libctf tests under leak sanitizers etc even if those spray warnings on simple CTF compilations, rather than being blocked from doing so just when we would most like to. ld/ * testsuite/lib/ld-lib.exp (check_ctf_available): detect CTF even if a CTF-capable compiler emits warnings. 2022-03-23 Simon Marchi gdb/python: remove Python 2/3 compatibility macros New in this version: - Rebase on master, fix a few more issues that appeared. python-internal.h contains a number of macros that helped make the code work with both Python 2 and 3. Remove them and adjust the code to use the Python 3 functions. Change-Id: I99a3d80067fb2d65de4f69f6473ba6ffd16efb2d 2022-03-23 Simon Marchi gdb/python: remove Python 2 support New in this version: - Add a PY_MAJOR_VERSION check in configure.ac / AC_TRY_LIBPYTHON. If the user passes --with-python=python2, this will cause a configure failure saying that GDB only supports Python 3. Support for Python 2 is a maintenance burden for any patches touching Python support. Among others, the differences between Python 2 and 3 string and integer types are subtle. It requires a lot of effort and thinking to get something that behaves correctly on both. And that's if the author and reviewer of the patch even remember to test with Python 2. See this thread for an example: https://sourceware.org/pipermail/gdb-patches/2021-December/184260.html So, remove Python 2 support. Update the documentation to state that GDB can be built against Python 3 (as opposed to Python 2 or 3). Update all the spots that use: - sys.version_info - IS_PY3K - PY_MAJOR_VERSION - gdb_py_is_py3k ... to only keep the Python 3 portions and drop the use of some now-removed compatibility macros. I did not update the configure script more than just removing the explicit references to Python 2. We could maybe do more there, like check the Python version and reject it if that version is not supported. Otherwise (with this patch), things will only fail at compile time, so it won't really be clear to the user that they are trying to use an unsupported Python version. But I'm a bit lost in the configure code that checks for Python, so I kept that for later. Change-Id: I75b0f79c148afbe3c07ac664cfa9cade052c0c62 2022-03-23 Jan Beulich x86: reject relocations involving registers To prevent fatal or even internal errors, add a simple check to i386_validate_fix(), rejecting relocations when their target symbol is an equate of a register (or resolved to reg_section for any other reason). x86: improve resolution of register equates Allow transitive (or recursive) equates to work in addition to direct ones. The only requirements are that - the equate being straight of a register, i.e. no expressions involved (albeit I'm afraid something like "%eax + 0" will be viewed as %eax), - at the point of use there's no forward ref left which cannot be resolved, yet. Revert "PR28977 tc-i386.c internal error in parse_register" This reverts commit 5fac3f02edacfca458f7eeaaaa33a87e26e0e332, which was superceeded / replaced by 4faaa10f3fab. 2022-03-23 Jan Beulich x86: don't attempt to resolve equates and alike from i386_parse_name() PR gas/28977 Perhaps right from its introduction in 4d1bb7955a8b it was wrong for i386_parse_name() to call parse_register(). This being a hook from the expression parser, it shouldn't be resolving e.g. equated symbols. That's relevant only for all other callers of parse_register(). To compensate, in Intel syntax mode check_register() needs calling; perhaps not doing so was an oversight right when the function was introduced. This is necessary in particular to force EVEX encoding when VRex registers are used (but of course also to reject bad uses of registers, i.e. fully matching what parse_register() needs it for). 2022-03-23 Luis Machado Update the list of recognized m-profile TAG_CPU_ARCH_* Check 3 additional variants previously not recognized: - TAG_CPU_ARCH_V7E_M - TAG_CPU_ARCH_V8M_BASE - TAG_CPU_ARCH_V8M_MAIN 2022-03-23 Jan Beulich gas/Dwarf5: re-use file 0 line string table entry when faking file 0 No need to emit the same string a 2nd time for file 1 in this case. gas/Dwarf5: adjust .debug_line file 0 checking First of all when a table entry has a NULL filename, the two inner if()s are better done the other way around: The 2nd doesn't depend on what the first does. This then renders redundant half of the conditions of the other if() and clarifies that subsequently only entry 0 is dealt with (indicating that part of the comment was wrong). Finally for there to be a usable name in slot 1, files_in_use needs to be larger than 1 and slot 1's (rather than slot 0's) name needs to be non-NULL. 2022-03-23 Jan Beulich gas/Dwarf5: drop dead code Commit 3417bfca676f ("GAS: DWARF-5: Ensure that the 0'th entry in the directory table contains the current... ") added a "dwarf_level < 5" check to out_dir_and_file_list(). This rendered dead that branch of the construct, due to the enclosing if()'s "DWARF2_LINE_VERSION >= 5". Delete that code as well as the corresponding part of the comment. While there also drop a redundant "dirs != NULL": "dirs" will always be non-NULL when dirs_in_use is not zero. 2022-03-23 Jan Beulich gas/Dwarf: improve debug info generation from .irp and alike blocks Tying the bumping of the logical line number to reading from the original source file looks wrong: Upon finishing of the processing of an sb the original values will be restored anyway. Yet without bumping the line counter uses of .line inside e.g. an .irp construct won't have the intended effect: Such uses may be necessary to ensure proper debug info is emitted in particular when switching sections inside the .irp body, as dwarf2_gen_line_info() would bail without doing anything when it finds the line number unchanged from what it saw last. 2022-03-23 Jan Beulich ELF32: don't silently truncate relocation addends At least x86-64's x32 sub-mode and RISC-V's 32-bit mode calculate addends as 64-bit values, but store them in signed 32-bit fields when generating the file without encountering any earlier error. When the relocated field is a 64-bit one, the value resulting after processing the relocation record when linking (or the latest when loading) may thus be wrong due to the truncation. With the code change in place, one x32 testcase actually triggers the new diagnostic. That one case of too large a (negative) addend is being adjusted alongside the addition of a new testcase to actually trigger the new error. (Note that due to internal BFD behavior the relocation in .data doesn't get processed anymore after the errors in .text.) Note that in principle it is possible to express 64-bit relocations in ELF32, but this would require .rel relocations, i.e. with the addend stored in the 64-bit field being relocated. But I guess it would be a lot of effort for little gain to actually support this. 2022-03-23 Jan Beulich gas: retain whitespace between strings Macro arguments may be separated by commas or just whitespace. Macro arguments may also be quoted (where one level of quotes is removed in the course of determining the values for the respective formal parameters). Furthermore this quote removal knows _two_ somewhat odd escaping mechanisms: One, apparently in existence forever, is that a pair of quotes counts as the escaping of a quote, with the pair being transformed to a single quote in the course of quote removal. The other (introduced by c06ae4f232e6) looks more usual on the surface in that it deals with \" sequences, but it _retains_ the escaping \. Hence only the former mechanism is suitable when the value to be used by the macro body is to contain a quote. Yet this results in ambiguity of what "a""b" is intended to mean; elsewhere (e.g. for .ascii) it represents two successive string literals. However, in any event is the above different from "a" "b": I don't think this can be viewed the same as "a""b" when processing macro arguments. Change the scrubber to retain such whitespace, by making the processing of strings more similar to that of symbols. And indeed this appears to make sense when taking into account that for quite a while gas has been supporting quoted symbol names. Taking a more general view, however, the change doesn't go quite far enough. There are further cases where significant whitespace is removed by the scrubber. The new testcase enumerates a few in its ".if 0" section. I'm afraid the only way that I see to deal with this would be to significantly simplify the scrubber, such that it wouldn't do much more than collapse sequences of unquoted whitespace into a single blank. To be honest problems in this area aren't really surprising when seeing that there's hardly any checking of .macro use throughout the testsuite (and in particular in the [relatively] generic tests under all/). 2022-03-23 Vladimir Mezentsev Only .so files are used in libcollector. Remove the other files. * libcollector/Makefile.am (install-data-local): Remove the *.la and *.a libraries. * libcollector/Makefile.in: Regenerate. 2022-03-23 Tiezhu Yang gdb: testsuite: use gdb_attach to fix jit-elf.exp If /proc/sys/kernel/yama/ptrace_scope is 1, when execute the following command without superuser: make check-gdb TESTS="gdb.base/jit-elf.exp" we can see the following messages in gdb/testsuite/gdb.log: (gdb) attach 1650108 Attaching to program: /home/yangtiezhu/build/gdb/testsuite/outputs/gdb.base/jit-elf/jit-elf-main, process 1650108 ptrace: Operation not permitted. (gdb) FAIL: gdb.base/jit-elf.exp: attach: one_jit_test-2: break here 1: attach use gdb_attach to fix the above issue, at the same time, the clean_reattach proc should return a value to indicate whether it worked, and the callers should return early as well on failure. 2022-03-23 Tiezhu Yang gdb: testsuite: use gdb_attach to fix attach-pie-noexec.exp If /proc/sys/kernel/yama/ptrace_scope is 1, when execute the following command without superuser: make check-gdb TESTS="gdb.base/attach-pie-noexec.exp" we can see the following messages in gdb/testsuite/gdb.log: (gdb) attach 6500 Attaching to process 6500 ptrace: Operation not permitted. (gdb) PASS: gdb.base/attach-pie-noexec.exp: attach It is obviously wrong, the expected result should be UNSUPPORTED in such a case. With this patch, we can see "Operation not permitted" in the log info, and then we can do the following processes to test: (1) set ptrace_scope as 0 $ echo 0 | sudo tee /proc/sys/kernel/yama/ptrace_scope $ make check-gdb TESTS="gdb.base/attach-pie-noexec.exp" (2) use sudo $ sudo make check-gdb TESTS="gdb.base/attach-pie-noexec.exp" 2022-03-23 Tiezhu Yang gdb: testsuite: add new gdb_attach to check "attach" command This commit adds new gdb_attach to centralize the failure checking of "attach" command. Return 0 if attach failed, otherwise return 1. 2022-03-23 Tiezhu Yang gdb: testsuite: remove attach test from can_spawn_for_attach As Pedro Alves said, caching procs should not issue pass/fail [1], this commit removes attach test from can_spawn_for_attach, at the same time, use "verbose -log" instead of "unsupported" to get a trace about why a test run doesn't support spawning for attach. [1] https://sourceware.org/pipermail/gdb-patches/2022-March/186311.html 2022-03-23 GDB Administrator Automatic date update in version.in 2022-03-22 John Baldwin Add support for hardware breakpoints/watchpoints on FreeBSD/Aarch64. This shares aarch64-nat.c and nat/aarch64-hw-point.c with the Linux native target. Since FreeBSD writes all of the debug registers in one ptrace op, use an unordered_set<> to track the "dirty" state for threads rather than bitmasks of modified registers. fbsd-nat: Add a low_prepare_to_resume virtual method. This method can be overridden by architecture-specific targets to perform additional work before a thread is resumed. 2022-03-22 John Baldwin fbsd-nat: Add a low_delete_thread virtual method. This method can be overridden by architecture-specific targets to perform additional work when a thread is deleted. Note that this method is only invoked on systems supporting LWP events, but the pending use case (aarch64 debug registers) is not supported on older kernels that do not support LWP events. 2022-03-22 John Baldwin fbsd-nat: Add helper routine to fetch siginfo_t for a ptid. 2022-03-22 John Baldwin aarch64: Add an aarch64_nat_target mixin class. This class includes platform-independent target methods for hardware breakpoints and watchpoints using routines from nat/aarch64-hw-point.c. stopped_data_address is not platform-independent since the FAR register holding the address for a breakpoint hit must be fetched in a platform-specific manner. However, aarch64_stopped_data_address is provided as a helper routine which performs platform-independent validation given the value of the FAR register. For tracking the per-process debug register mirror state, use an unordered_map indexed by pid as recently adopted in x86-nat.c rather than a manual linked-list. 2022-03-22 John Baldwin nat: Split out platform-independent aarch64 debug register support. Move non-Linux-specific support for hardware break/watchpoints from nat/aarch64-linux-hw-point.c to nat/aarch64-hw-point.c. Changes beyond a simple split of the code are: - aarch64_linux_region_ok_for_watchpoint and aarch64_linux_any_set_debug_regs_state renamed to drop linux_ as they are not platform specific. - Platforms must implement the aarch64_notify_debug_reg_change function which is invoked from the platform-independent code when a debug register changes for a given debug register state. This does not use the indirection of a 'low' structure as is done for x86. - The handling for kernel_supports_any_contiguous_range is not pristine. For non-Linux it is simply defined to true. Some uses of this could perhaps be implemented as new 'low' routines for the various places that check it instead? - Pass down ptid into aarch64_handle_breakpoint and aarch64_handle_watchpoint rather than using current_lwp_ptid which is only defined on Linux. In addition, pass the ptid on to aarch64_notify_debug_reg_change instead of the unused state argument. 2022-03-22 John Baldwin x86-fbsd-nat: Copy debug register state on fork. Use the FreeBSD native target low_new_fork hook to copy the per-process debug state from the parent to the child on fork. fbsd-nat: Add a low_new_fork virtual method. This method can be overridden by architecture-specific targets to perform additional work when a new child process is forked. 2022-03-22 John Baldwin Add an x86_fbsd_nat_target mixin class for FreeBSD x86 native targets. This class implements debug register support common between the i386 and amd64 native targets. While here, remove #ifdef's for HAVE_PT_GETDBREGS in FreeBSD-specific code. The ptrace request has been present on FreeBSD x86 architectures since 4.0 (released in March 2000). The last FreeBSD release without this support is 3.5 released in June 2000. 2022-03-22 John Baldwin x86-nat: Add x86_lookup_debug_reg_state. This function returns nullptr if debug register state does not yet exist for a given process rather than creating new state. x86-nat: Use an unordered_map to store per-pid debug reg state. This replaces a manual linked list which used O(n) lookup and removal. Remove USE_SIGTRAP_SIGINFO condition for FreeBSD/x86 debug regs support. For BSD x86 targets, stopped_by_hw_breakpoint doesn't check siginfo_t but inspects the DR6 register directly via PT_GETDBREGS. 2022-03-22 Tom Tromey Remove two unused variables I found a couple of spots that declare a symtab_and_line but don't actually use it. I think this probably isn't detected as unused because it has a constructor. 2022-03-22 Steiner H Gunderson Fix return code in _bfd_dwarf2_find_nearest_line(). * dwarf2.c (_bfd_dwarf2_find_nearest_line): if a function name is found, but no line number info, then return a result of 2. 2022-03-22 Andrew Burgess gdb/python: add gdb.format_address function Add a new function, gdb.format_address, which is a wrapper around GDB's print_address function. This method takes an address, and returns a string with the format: ADDRESS Where, ADDRESS is the original address, formatted as hexadecimal, SYMBOL is a symbol with an address lower than ADDRESS, and OFFSET is the offset from SYMBOL to ADDRESS in decimal. If there's no SYMBOL suitably close to ADDRESS then the part is not included. This is useful if a user wants to write a Python script that pretty-prints addresses, the user no longer needs to do manual symbol lookup, or worry about correctly formatting addresses. Additionally, there are some settings that effect how GDB picks SYMBOL, and whether the file name and line number should be included with the SYMBOL name, the gdb.format_address function ensures that the users Python script also benefits from these settings. The gdb.format_address by default selects SYMBOL from the current inferiors program space, and address is formatted using the architecture for the current inferior. However, a user can also explicitly pass a program space and architecture like this: gdb.format_address(ADDRESS, PROGRAM_SPACE, ARCHITECTURE) In order to format an address for a different inferior. Notes on the implementation: In py-arch.c I extended arch_object_to_gdbarch to add an assertion for the type of the PyObject being worked on. Prior to this commit all uses of arch_object_to_gdbarch were guaranteed to pass this function a gdb.Architecture object, but, with this commit, this might not be the case. So, with this commit I've made it a requirement that the PyObject be a gdb.Architecture, and this is checked with the assert. And in order that callers from other files can check if they have a gdb.Architecture object, I've added the new function gdbpy_is_architecture. In py-progspace.c I've added two new function, the first progspace_object_to_program_space, converts a PyObject of type gdb.Progspace to the associated program_space pointer, and gdbpy_is_progspace checks if a PyObject is a gdb.Progspace or not. 2022-03-22 Luis Machado Fix some stale header names from dwarf files Some of these references were not updated when they were moved to a separate directory. 2022-03-22 Vladimir Mezentsev Install gprofng libraries under $(pkglibdir) gprofng/ChangeLog 2022-03-21 Vladimir Mezentsev PR gprofng/28972 * gprofng/libcollector/Makefile.am: Rename lib_LTLIBRARIES to pkglib_LTLIBRARIES. Add install-data-local. * gprofng/src/Makefile.am: Likewise. * gprofng/src/envsets.cc (putenv_libcollector_ld_misc): New location of the gprofng libraries. * gprofng/configure.ac: Removed an unused GPROFNG_LIBDIR. * gprofng/Makefile.am: Removed an unused GPROFNG_LIBDIR. Add install-data-local. * gprofng/configure: Regenerate. * gprofng/Makefile.in: Likewise. * gprofng/doc/Makefile.in: Likewise. * gprofng/gp-display-htmllibcollector/Makefile.in: Likewise. * gprofng/libcollector/Makefile.in: Likewise. * gprofng/src/Makefile.in: Likewise. 2022-03-22 GDB Administrator Automatic date update in version.in 2022-03-21 Roland McGrath gdb: Add missing #include in solib.h The gdb_bfd_ref_ptr type is used in solib.h declarations. 2022-03-21 Aaron Merey PR gdb/27570: missing support for debuginfod in core_target::build_file_mappings Add debuginfod support to core_target::build_file_mappings and locate_exec_from_corefile_build_id to enable the downloading of missing executables and shared libraries referenced in core files. Also add debuginfod support to solib_map_sections so that previously downloaded shared libraries can be retrieved from the local debuginfod cache. When core file shared libraries are found locally, verify that their build-ids match the corresponding build-ids found in the core file. If there is a mismatch, attempt to query debuginfod for the correct build and print a warning if unsuccessful: warning: Build-id of /lib64/libc.so.6 does not match core file. Also disable debuginfod when gcore invokes gdb. Debuginfo is not needed for core file generation so debuginfod queries will slow down gcore unnecessarily. 2022-03-21 Aaron Merey gdb: Add soname to build-id mapping for core files Since commit aa2d5a422 gdb has been able to read executable and shared library build-ids within core files. Expand this functionality so that each core file bfd maintains a map of soname to build-id for each shared library referenced in the core file. This feature may be used to verify that gdb has found the correct shared libraries for core files and to facilitate downloading shared libaries via debuginfod. 2022-03-21 Pedro Alves Watchpoint followed by catchpoint misreports watchpoint (PR gdb/28621) If GDB reports a watchpoint hit, and then the next event is not TARGET_WAITKIND_STOPPED, but instead some event for which there's a catchpoint, such that GDB calls bpstat_stop_status, GDB mistakenly thinks the watchpoint triggered. Vis, using foll-fork.c: (gdb) awatch v Hardware access (read/write) watchpoint 2: v (gdb) catch fork Catchpoint 3 (fork) (gdb) c Continuing. Hardware access (read/write) watchpoint 2: v Old value = 0 New value = 5 main () at gdb.base/foll-fork.c:16 16 pid = fork (); (gdb) Continuing. Hardware access (read/write) watchpoint 2: v <<<< <<<< these lines are spurious Value = 5 <<<< Catchpoint 3 (forked process 1712369), arch_fork (ctid=0x7ffff7fa4810) at arch-fork.h:49 49 arch-fork.h: No such file or directory. (gdb) The problem is that when we handle the fork event, nothing called watchpoints_triggered before calling bpstat_stop_status. Thus, each watchpoint's watchpoint_triggered field was still set to watch_triggered_yes from the previous (real) watchpoint stop. watchpoint_triggered is only current called in the handle_signal_stop path, when handling TARGET_WAITKIND_STOPPED. This fixes it by adding watchpoint_triggered calls in the other events paths that call bpstat_stop_status. But instead of adding them explicitly, it adds a new function bpstat_stop_status_nowatch that wraps bpstat_stop_status and calls watchpoint_triggered, and then replaces most calls to bpstat_stop_status with calls to bpstat_stop_status_nowatch. This required constifying watchpoints_triggered. New test included, which fails without the fix. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28621 Change-Id: I282b38c2eee428d25319af3bc842f9feafed461c 2022-03-21 Pedro Alves gdbserver: Fixup previous patch The previous prepare_resume_reply change missed updating the 'buf' reference that overwrites the 'T', so if 'buf' was advanced, we'd still overwrite the wrong character. This fixes it. Change-Id: Ia8ce433366b85af4e268c1c49e7b447da3130a4d 2022-03-21 Pedro Alves gdbserver: Fix incorrect assertion While playing with adding a new event kind, I noticed that prepare_resume_reply TARGET_WAITKIND_FORKED, etc. advance 'buf', so if we force-disable the T packet, we'd fail the *buf == 'T' assertion. Fix it by tweaking the assertion to always look at the beginning of the buffer. Change-Id: I8c38e32353db115edcde418b3b1e8ba12343c22b 2022-03-21 Simon Marchi gdb: re-generate config.in I'm getting this diff when running `autoreconf -vf`. Change-Id: Id5f009d0f0481935c1ee9df5332cb4bf45fbd32d 2022-03-21 Andrew Burgess gdb/x86: handle stap probe arguments in xmm registers On x86 machines with xmm register, and with recent versions of systemtap (and gcc?), it can occur that stap probe arguments will be placed into xmm registers. I notice this happening on a current Fedora Rawhide install with the following package versions installed: $ rpm -q glibc systemtap gcc glibc-2.35.9000-10.fc37.x86_64 systemtap-4.7~pre16468670g9f253544-1.fc37.x86_64 gcc-12.0.1-0.12.fc37.x86_64 If I check the probe data in libc, I see this: $ readelf -n /lib64/libc.so.6 ... stapsdt 0x0000004d NT_STAPSDT (SystemTap probe descriptors) Provider: libc Name: pthread_start Location: 0x0000000000090ac3, Base: 0x00000000001c65c4, Semaphore: 0x0000000000000000 Arguments: 8@%xmm1 8@1600(%rbx) 8@1608(%rbx) stapsdt 0x00000050 NT_STAPSDT (SystemTap probe descriptors) Provider: libc Name: pthread_create Location: 0x00000000000912f1, Base: 0x00000000001c65c4, Semaphore: 0x0000000000000000 Arguments: 8@%xmm1 8@%r13 8@8(%rsp) 8@16(%rsp) ... Notice that for both of these probes, the first argument is a uint64_t stored in the xmm1 register. Unfortunately, if I try to use this probe within GDB, then I can't view the first argument. Here's an example session: $ gdb $(which gdb) (gdb) start ... (gdb) info probes stap libc pthread_create ... (gdb) break *0x00007ffff729e2f1 # Use address of probe. (gdb) continue ... (gdb) p $_probe_arg0 Invalid cast. What's going wrong? If I re-run my session, but this time use 'set debug stap-expression 1', this is what I see: (gdb) set debug stap-expression 1 (gdb) p $_probe_arg0 Operation: UNOP_CAST Operation: OP_REGISTER String: xmm1 Type: uint64_t Operation: UNOP_CAST Operation: OP_REGISTER String: r13 Type: uint64_t Operation: UNOP_CAST Operation: UNOP_IND Operation: UNOP_CAST Operation: BINOP_ADD Operation: OP_LONG Type: long Constant: 0x0000000000000008 Operation: OP_REGISTER String: rsp Type: uint64_t * Type: uint64_t Operation: UNOP_CAST Operation: UNOP_IND Operation: UNOP_CAST Operation: BINOP_ADD Operation: OP_LONG Type: long Constant: 0x0000000000000010 Operation: OP_REGISTER String: rsp Type: uint64_t * Type: uint64_t Invalid cast. (gdb) The important bit is this: Operation: UNOP_CAST Operation: OP_REGISTER String: xmm1 Type: uint64_t Which is where we cast the xmm1 register to uint64_t. And the final piece of the puzzle is: (gdb) ptype $xmm1 type = union vec128 { v8bf16 v8_bfloat16; v4f v4_float; v2d v2_double; v16i8 v16_int8; v8i16 v8_int16; v4i32 v4_int32; v2i64 v2_int64; uint128_t uint128; } So, we are attempting to cast a union type to a scalar type, which is not supporting in C/C++, and as a consequence GDB's expression evaluator throws an error when we attempt to do this. The first approach I considered for solving this problem was to try and make use of gdbarch_stap_adjust_register. We already have a gdbarch method (gdbarch_stap_adjust_register) that allows us to tweak the name of the register that we access. Currently only x86 architectures use this to transform things like ax to eax in some cases. I wondered, what if we change gdbarch_stap_adjust_register to do more than just change the register names? What if this method instead became gdbarch_stap_read_register. This new method would return a operation_up, and would take the register name, and the type we are trying to read from the register, and return the operation that actually reads the register. The default implementation of this method would just use user_reg_map_name_to_regnum, and then create a register_operation, like we already do in stap_parse_register_operand. But, for x86 architectures this method would fist possibly adjust the register name, then do the default action to read the register. Finally, for x86 this method would spot when we were accessing an xmm register, and, based on the type being pulled from the register, would extract the correct field from the union. The benefit of this approach is that it would work with the expression types that GDB currently supports. The draw back would be that this approach would not be very generic. We'd need code to handle each sub-field size with an xmm register. If other architectures started using vector registers for probe arguments, those architectures would have to create their own gdbarch_stap_read_register method. And finally, the type of the xmm registers comes from the type defined in the target description, there's a risk that GDB might end up hard-coding the names of type sub-fields, then if a target uses a different target description, with different field names for xmm registers, the stap probes would stop working. And so, based on all the above draw backs, I rejected this first approach. My second plan involves adding a new expression type to GDB called unop_extract_operation. This new expression takes a value and a type, during evaluation the value contents are fetched, and then a new value is extracted from the value contents (based on type). This is similar to the following C expression: result_value = *((output_type *) &input_value); Obviously we can't actually build this expression in this case, as the input_value is in a register, but hopefully the above makes it clearer what I'm trying to do. The benefit of the new expression approach is that this code can be shared across all architectures, and it doesn't care about sub-field names within the union type. The draw-backs that I see are potential future problems if arguments are not stored within the least significant bytes of the register. However if/when that becomes an issue we can adapt the gdbarch_stap_read_register approach to allow architectures to control how a value is extracted. For testing, I've extended the existing gdb.base/stap-probe.exp test to include a function that tries to force an argument into an xmm register. Obviously, that will only work on a x86 target, so I've guarded the new function with an appropriate GCC define. In the exp script we use readelf to check if the probe exists, and is using the xmm register. If the probe doesn't exist then the associated tests are skipped. If the probe exists, put isn't using the xmm register (which will depend on systemtap/gcc versions), then again, the tests are skipped. Otherwise, we can run the test. I think the cost of running readelf is pretty low, so I don't feel too bad making all the non-xmm targets running this step. I found that on a Fedora 35 install, with these packages installed, I was able to run this test and have the probe argument be placed in an xmm register: $ rpm -q systemtap gcc glibc systemtap-4.6-4.fc35.x86_64 gcc-11.2.1-9.fc35.x86_64 glibc-2.34-7.fc35.x86_64 Finally, as this patch adds a new operation type, then I need to consider how to generate an agent expression for the new operation type. I have kicked the can down the road a bit on this. In the function stap_parse_register_operand, I only create a unop_extract_operation in the case where the register type is non-scalar, this means that in most cases I don't need to worry about generating an agent expression at all. In the xmm register case, when an unop_extract_operation will be created, I have sketched out how the agent expression could be handled, however, this code is currently not reached. When we try to generate the agent expression to place the xmm register on the stack, GDB hits this error: (gdb) trace -probe-stap test:xmmreg Tracepoint 1 at 0x401166 (gdb) actions Enter actions for tracepoint 1, one per line. End with a line saying just "end". >collect $_probe_arg0 Value not scalar: cannot be an rvalue. This is because GDB doesn't currently support placing non-scalar types on the agent expression evaluation stack. Solving this is clearly related to the original problem, but feels a bit like a second problem. I'd like to get feedback on whether my approach to solving the original problem is acceptable or not before I start looking at how to handle xmm registers within agent expressions. 2022-03-21 Steiner H Gunderson Reduce O(n2) performance overhead when parsing DWARF unit information. PR 28978 * dwarf2.c (scan_unit_for_symbols): When performing second pass, check to see if the function or variable being processed is the same as the previous one. 2022-03-21 Jan Beulich x86: don't suppress overflow diagnostics in x32 mode Unlike in 64-bit mode, where values wrap at the 64-bit boundary anyway, there's no wrapping at the 32-bit boundary here, and hence overflow detection shouldn't be suppressed just because rela relocations are going to be used. The extra check against NO_RELOC is actually a result of an ilp32 test otherwise failing. But thinking about it, reporting overflows for not-really-relocations (typically because of earlier errors) makes little sense in general. Perhaps this should even be extended to non- 64-bit modes. 2022-03-21 Simon Marchi gdb/testsuite: reformat gdb.python/pretty-print-call-by-hand.py Run black on the file. Change-Id: Ifb576137fb7158a0227173f61c1202f0695b3685 2022-03-21 Bruno Larsen [gdb/testsuite] test a function call by hand from pretty printer The test case added here is testing the bug gdb/28856, where calling a function by hand from a pretty printer makes GDB crash. There are 6 mechanisms to trigger this crash in the current test, using the commands backtrace, up, down, finish, step and continue. Since the failure happens because of use-after-free (more details below) the tests will always have a chance of passing through sheer luck, but anecdotally they seem to fail all of the time. The reason GDB is crashing is a use-after-free problem. The above mentioned functions save a pointer to the current frame's information, then calls the pretty printer, and uses the saved pointer for different reasons, depending on the function. The issue happens because call_function_by_hand needs to reset the obstack to get the current frame, invalidating the saved pointer. 2022-03-21 Pedro Alves gdb/testsuite: Installed-GDB testing & data-directory In testsuite/README, we suggest that you can run the testsuite against some other GDB binary by using: make check RUNTESTFLAGS=GDB=/usr/bin/gdb However, that example isn't fully correct, because with that command line, the testsuite will still pass -data-directory=[pwd]/../data-directory to /usr/bin/gdb, like e.g.: ... builtin_spawn /usr/bin/gdb -nw -nx -data-directory /home/pedro/gdb/build/gdb/testsuite/../data-directory -iex set height 0 -iex set width 0 ... while if you're testing an installed GDB (the system GDB being the most usual scenario), then you should normally let it use its own configured directory, not the just-built GDB's data directory. This commit improves the status quo with the following two changes: - if the user specifies GDB on the command line, then by default, don't start GDB with the -data-directory command line option. I.e., let the tested GDB use its own configured data directory. - let the user override the data directory, via a new GDB_DATA_DIRECTORY global. This replaces the existing BUILD_DATA_DIRECTORY variable in testsuite/lib/gdb.exp, which wasn't overridable, and was a bit misnamed for the new purpose. So after this, the following commands I believe behave intuitively: # Test the non-installed GDB in some build dir: make check \ RUNTESTFLAGS="GDB=/path/to/other/build/gdb \ GDB_DATA_DIRECTORY=/path/to/other/build/gdb/data-directory" # Test the GDB installed in some prefix: make check \ RUNTESTFLAGS="GDB=/opt/gdb/bin/gdb" # Test the built GDB with some alternative data directory, e.g., the system GDB's data directory: make check \ RUNTESTFLAGS="GDB_DATA_DIRECTORY=/usr/share/gdb" Change-Id: Icdc21c85219155d9564a9900961997e6624b78fb 2022-03-21 Nick Clifton z80 assembler: Fix new unexpected overflow warning in v2.37 PR 28791 * config/tc-z80.c (emit_data_val): Do not warn about overlarge constants generated by bit manipulation operators. * testsuite/gas/z80/pr28791.s: New test source file. * testsuite/gas/z80/pr28791.d: New test driver file. 2022-03-21 Andreas Schwab Add support for readline 8.2 In readline 8.2 the type of rl_completer_word_break_characters changed to include const. 2022-03-21 GDB Administrator Automatic date update in version.in 2022-03-20 Andreas Schwab RISC-V: Fix misplaced @end table Move the csr-check and arch items inside the table for the .option directive. 2022-03-20 Alan Modra PR28979, internal error in demand_empty_rest_of_line The change in read_a_source_file prevents the particular testcase in the PR from triggering the assertion in demand_empty_rest_of_line. I've also removed the assertion. Nothing much goes wrong with gas if something else triggers it, so it's not worthy of an abort. I've also changed my previous patch to ignore_rest_of_line to allow that function to increment input_line_pointer past buffer_limit, like demand_empty_rest_of_line: The two functions ought to behave the same in that respect. Finally, demand_empty_rest_of_line gets a little hardening to prevent accesses past buffer_limit plus one. PR 28979 * read.c (read_a_source_file): Calculate known size for sbuf rather than calling strlen. (demand_empty_rest_of_line): Remove "know" check. Expand comment. Don't dereference input_line_pointer when past buffer_limit. (ignore_rest_of_line): Allow input_line_pointer to increment to buffer_limit plus one. Expand comment. 2022-03-20 Joel Brobecker Update gdb/NEWS after GDB 12 branch creation. This commit a new section for the next release branch, and renames the section of the current branch, now that it has been cut. 2022-03-20 Joel Brobecker Bump version to 13.0.50.DATE-git. Now that the GDB 12 branch has been created, this commit bumps the version number in gdb/version.in to 13.0.50.DATE-git For the record, the GDB 12 branch was created from commit 2be64de603f8b3ae359d2d3fbf5db0e79869f32b. Also, as a result of the version bump, the following changes have been made in gdb/testsuite: * gdb.base/default.exp: Change $_gdb_major to 13. 2022-03-20 liuzhensong ld:LoongArch: Add test cases to adapt to LoongArch32 and LoongArch64 ld/testsuite/ld-loongarch-elf * ld-loongarch-elf.exp: Test LoongArch32 and LoongArch64 testcases respectively. * jmp_op.d: Fix bug in test LoongArch32. * disas-jirl-32.d: New test case for LoongArch32. * disas-jirl-32.s: New test case for LoongArch32. * disas-jirl.d: Skip test case LoongArch32. * macro_op_32.d: New test case for LoongArch32. * macro_op_32.s: New test case for LoongArch32. * macro_op.d: Skip test case LoongArch32. 2022-03-20 liuzhensong gas:LoongArch: Fix "make check" pr21884 fail in LoongArch32. gas/config/ * tc-loongarch.c: Add function to select target mach. * tc-loongarch.h: Define macro TARGET_MACH. ld: loongarch: Skip unsupport test cases. ld/testsuite/ld-elf/ * eh5.d Skip loongarch64 target. * pr21884.d Skip loongarch* targets. * pr26936.d Skip loongarch* targets. 2022-03-20 liuzhensong LoongArch: Fix LD check fails. Some test cases about ifunc. bfd/ * elfnn-loongarch.c * elfxx-loongarch.h === ld Summary === of expected passes 1430 of expected failures 11 of untested testcases 1 of unsupported tests 154 2022-03-20 liuzhensong LoongArch: Update ABI eflag in elf header. Update LoongArch ABI eflag in elf header. ilp32s 0x5 ilp32f 0x6 ilp32d 0x7 lp64s 0x1 lp64f 0x2 lp64d 0x3 bfd/ * elfnn-loongarch.c Check object flags while ld. gas/ * tc-loongarch.c Write eflag to elf header. include/elf * loongarch.h Define ABI number. 2022-03-20 liuzhensong gas:LoongArch: Fix wrong line number in .debug_line The dwarf2_emit_insn() can create debuginfo of line. But it is called too late in append_fixp_and_insn. It causes extra offs when debuginfo of line sets address. gas/config/ * tc-loongarch.c 2022-03-20 liuzhensong gas:LoongArch: Fix segment error in compilation due to too long symbol name. Change "char buffer[8192];" into "char *buffer = (char *) malloc(1000 + 6 * len_str);" in function loongarch_expand_macro_with_format_map. gas/ * config/tc-loongarch.c include/ * opcode/loongarch.h opcodes/ * loongarch-coder.c 2022-03-20 liuzhensong LoongArch: Use functions instead of magic numbers. Replace the magic numbers in gas(tc-loongarch.c) and bfd(elfnn-loongarch.c) with the functions defined in the howto table(elfxx-loongarch.c). gas/ * config/tc-loongarch.c: use functions. bfd/ * elfnn-loongarch.c: use functions. * elfxx-loongarch.c: define functions. * elfxx-loongarch.h 2022-03-20 liuzhensong ubsan: loongarch : signed integer shift overflow. opcodes/ * loongarch-coder.c : int32_t ret = 0; ret <<= sizeof (ret) * 8 - len; ret >>= sizeof (ret) * 8 - len; ... Avoid ubsan warning. 2022-03-20 GDB Administrator Automatic date update in version.in 2022-03-19 Simon Marchi gdb/python: remove gdb._mi_commands dict The motivation for this patch is the fact that py-micmd.c doesn't build with Python 2, due to PyDict_GetItemWithError being a Python 3-only function: CXX python/py-micmd.o /home/smarchi/src/binutils-gdb/gdb/python/py-micmd.c: In function ‘int micmdpy_uninstall_command(micmdpy_object*)’: /home/smarchi/src/binutils-gdb/gdb/python/py-micmd.c:430:20: error: ‘PyDict_GetItemWithError’ was not declared in this scope; did you mean ‘PyDict_GetItemString’? 430 | PyObject *curr = PyDict_GetItemWithError (mi_cmd_dict.get (), | ^~~~~~~~~~~~~~~~~~~~~~~ | PyDict_GetItemString A first solution to fix this would be to try to replace PyDict_GetItemWithError equivalent Python 2 code. But I looked at why we are doing this in the first place: it is to maintain the `gdb._mi_commands` Python dictionary that we use as a `name -> gdb.MICommand object` map. Since the `gdb._mi_commands` dictionary is never actually used in Python, it seems like a lot of trouble to use a Python object for this. My first idea was to replace it with a C++ map (std::unordered_map>). While implementing this, I realized we don't really need this map at all. The mi_command_py objects registered in the main MI command table can own their backing micmdpy_object (that's a gdb.MICommand, but seen from the C++ code). To know whether an mi_command is an mi_command_py, we can use a dynamic cast. Since there's one less data structure to maintain, there are less chances of messing things up. - Change mi_command_py::m_pyobj to a gdbpy_ref, the mi_command_py is now what keeps the MICommand alive. - Set micmdpy_object::mi_command in the constructor of mi_command_py. If mi_command_py manages setting/clearing that field in swap_python_object, I think it makes sense that it also takes care of setting it initially. - Move a bunch of checks from micmdpy_install_command to swap_python_object, and make them gdb_asserts. - In micmdpy_install_command, start by doing an mi_cmd_lookup. This is needed to know whether there's a Python MI command already registered with that name. But we can already tell if there's a non-Python command registered with that name. Return an error if that happens, rather than waiting for insert_mi_cmd_entry to fail. Change the error message to "name is already in use" rather than "may already be in use", since it's more precise. I asked Andrew about the original intent of using a Python dictionary object to hold the command objects. The reason was to make sure the objects get destroyed when the Python runtime gets finalized, not later. Holding the objects in global C++ data structures and not doing anything more means that the held Python objects will be decref'd after the Python interpreter has been finalized. That's not desirable. I tried it and it indeed segfaults. Handle this by adding a gdbpy_finalize_micommands function called in finalize_python. This is the mirror of gdbpy_initialize_micommands called in do_start_initialization. In there, delete all Python MI commands. I think it makes sense to do it this way: if it was somehow possible to unload Python support from GDB in the middle of a session we'd want to unregister any Python MI command. Otherwise, these MI commands would be backed with a stale PyObject or simply nothing. Delete tests that were related to `gdb._mi_commands`. Co-Authored-By: Andrew Burgess Change-Id: I060d5ebc7a096c67487998a8a4ca1e8e56f12cd3 2022-03-19 GDB Administrator Automatic date update in version.in 2022-03-18 Pedro Alves Fix crash with stepi, no debug info, and "set debug infrun 1" A stepi in a function without debug info with "set debug infrun 1" crashes GDB since commit c8353d682f69 (gdb/infrun: some extra infrun debug print statements), due to a reference to "tp->current_symtab->filename" when tp->current_symtab is null. This commit adds the missing null check. The output in this case becomes: [infrun] set_step_info: symtab = , line = 0, step_frame_id = {stack=0x7fffffffd980,code=0x0000000000456c30,!special}, step_stack_frame_id = {stack=0x7fffffffd980,code=0x0000000000456c30,!special} Change-Id: I5171a9d222bc7e15b9dba2feaba7d55c7acd99f8 2022-03-18 Tom Tromey Implement gdbarch_stack_frame_destroyed_p for aarch64 The internal AdaCore testsuite has a test that checks that an out-of-scope watchpoint is deleted. This fails on some aarch64 configurations, reporting an extra stop: (gdb) continue Continuing. Thread 3 hit Watchpoint 2: result Old value = 64 New value = 0 0x0000000040021648 in pck.get_val (seed=0, off_by_one=false) at [...]/pck.adb:13 13 end Get_Val; I believe what is happening here is that the variable is stored at: DW_AT_location : 2 byte block: 91 7c (DW_OP_fbreg: -4) and the extra stop is reported just before a return, when the ldp instruction is executed: 0x0000000040021644 <+204>: ldp x29, x30, [sp], #48 0x0000000040021648 <+208>: ret This instruction modifies the frame base calculation, and so the test picks up whatever memory is pointed to in the callee frame. Implementing the gdbarch hook gdbarch_stack_frame_destroyed_p fixes this problem. As usual with this sort of patch, it has passed internal testing, but I don't have a good way to try it with dejagnu. So, I don't know whether some existing test covers this. I suspect there must be one, but it's also worth noting that this test passes for aarch64 in some configurations -- I don't know what causes one to fail and another to succeed. 2022-03-18 Nick Clifton Fix Build issues due to patch "gprofng: a new GNU profiler" Find and fix more places where clock_gettime() and CLOCK_MONOTONIC_RAW are used. 2022-03-18 Simon Marchi gdb: run black to format some Python files Seems like some leftovers from previous commits. Change-Id: I7155ccdf7a4fef83bcb3d60320252c3628efdb83 2022-03-18 Viorel Preoteasa Fix ld-arm bug in encoding of blx calls jumping from thumb to arm instructions PR 28924 * elf32-arm.c (THM_MAX_FWD_BRANCH_OFFSET): Fix definition. (THM2_MAX_FWD_BRANCH_OFFSET): Likewise. 2022-03-18 Jan Beulich x86: also fold remaining multi-vector-size shift insns By slightly relaxing the checking in operand_type_register_match() we can fold the vector shift insns with an XMM source as well. While strictly speaking an overlap in just one size (see the code comment) is not enough (both operands could have multiple sizes with just a single common one), this is good enough for all templates we have, or which could sensibly / usefully appear (within the scope of the present operand matching model). Tightening this a little would be possible, but would require broadcast related information to be passed into the function. 2022-03-18 Jan Beulich x86: drop stray CheckRegSize from VEXTRACT{F,I}32X4 They have only a single operand allowing multiple sizes, hence there are no pairs of operands to check for consistent size. x86: fold certain AVX2 templates into their AVX counterparts Like for AVX512VL we can make the handling of operand sizes a little more flexible to allow reducing the number of templates we have. 2022-03-18 Tsukasa OI RISC-V: Cache management instructions This commit adds 'Zicbom' / 'Zicboz' instructions. bfd/ChangeLog: * elfxx-riscv.c (riscv_multi_subset_supports): Add handling for new instruction classes. include/ChangeLog: * opcode/riscv-opc.h (MATCH_CBO_CLEAN, MASK_CBO_CLEAN, MATCH_CBO_FLUSH, MASK_CBO_FLUSH, MATCH_CBO_INVAL, MASK_CBO_INVAL, MATCH_CBO_ZERO, MASK_CBO_ZERO): New macros. * opcode/riscv.h (enum riscv_insn_class): Add new instruction classes INSN_CLASS_ZICBOM and INSN_CLASS_ZICBOZ. opcodes/ChangeLog: * riscv-opc.c (riscv_opcodes): Add cache-block management instructions. 2022-03-18 Tsukasa OI RISC-V: Prefetch hint instructions and operand set This commit adds 'Zicbop' hint instructions. bfd/ChangeLog: * elfxx-riscv.c (riscv_multi_subset_supports): Add handling for new instruction class. gas/ChangeLog: * config/tc-riscv.c (riscv_ip): Add handling for new operand type 'f' (32-byte aligned pseudo S-type immediate for prefetch hints). (validate_riscv_insn): Likewise. include/ChangeLog: * opcode/riscv-opc.h (MATCH_PREFETCH_I, MASK_PREFETCH_I, MATCH_PREFETCH_R, MASK_PREFETCH_R, MATCH_PREFETCH_W, MASK_PREFETCH_W): New macros. * opcode/riscv.h (enum riscv_insn_class): Add new instruction class INSN_CLASS_ZICBOP. opcodes/ChangeLog: * riscv-dis.c (print_insn_args): Add handling for new operand type. * riscv-opc.c (riscv_opcodes): Add prefetch hint instructions. 2022-03-18 Alan Modra PR28977 tc-i386.c internal error in parse_register PR 28977 * config/tc-i386.c (parse_register): Handle X_op not O_register as for a non-reg_section symbol. Simplify array bounds check. 2022-03-18 Alan Modra Tidy gas current_frame before exit Releases some obstack memory on an error path. * cond.c (cond_finish_check): Call cond_exit_macro. 2022-03-18 Alan Modra ubsan: logical_input_line signed integer overflow To avoid a completely useless fuzzing ubsan "bug" report, I decided to make logical_input_line unsigned. * input-scrub.c (logical_input_line): Make unsigned. (struct input_save): Here too. (input_scrub_reinit, input_scrub_close, bump_line_counters), (as_where): Adjust to suit. 2022-03-18 GDB Administrator Automatic date update in version.in 2022-03-17 H.J. Lu gprofng: Skip jsynprog with a broken javac On CET enabled Linux/x86-64 machines, one can get $ javac simple.java Error: dl failure on line 894 Error: failed /usr/lib/jvm/java-1.8.0-openjdk-1.8.0.322.b06-6.fc35.x86_64/jre/lib/amd64/server/libjvm.so, because /usr/lib/jvm/java-1.8.0-openjdk-1.8.0.322.b06-6.fc35.x86_64/jre/lib/amd64/server/libjvm.so: rebuild shared object with SHSTK support enabled Set GPROFNG_BROKEN_JAVAC to "yes" only with a broken javac and skip the jsynprog test with a broken javac. PR gprofng/28965 * Makefile.am (GPROFNG_BROKEN_JAVAC): New. (check-DEJAGNU): Pass GPROFNG_BROKEN_JAVAC to runtest. * configure.ac (GPROFNG_BROKEN_JAVAC): New AC_SUBST. Set to yes with a broken javac. * Makefile.in: Regenerate. * configure: Likewise. * testsuite/gprofng.display/display.exp: Skip jsynprog with a broken javac. 2022-03-17 John Baldwin Remove fall throughs in core_target::xfer_partial. The cases for TARGET_OBJECT_LIBRARIES and TARGET_OBJECT_LIBRARIES_AIX can try to fetch different data objects (such as TARGET_OBJECT_SIGNAL_INFO) if gdbarch methods for the requested data aren't present. Return with TARGET_XFER_E_IO if the gdbarch method isn't present instead. 2022-03-17 Pedro Alves gdb: Remove support for S+core GCC removed support for score back in 2014 already. Back then, we basically agreed about removing it from GDB too, but it ended up being forgotten. See: https://sourceware.org/pipermail/gdb/2014-October/044643.html Following through this time around. Change-Id: I5b25a1ff7bce7b150d6f90f4c34047fae4b1f8b4 2022-03-17 Tom Tromey Add another test for Ada Wide_Wide_String In an earlier patch, I had written that I wanted to add this test: ptype Wide_Wide_String'("literal") ... but that it failed with the distro GNAT. Further investigation showed that it could be made to work by adding a function using Wide_Wide_String to the program -- this caused the type to end up in the debug info. This patch adds the test. I'm checking this in. 2022-03-17 Alan Modra ubsan: Null dereference in parse_module * vms-alpha.c (parse_module): Sanity check that DST__K_RTNBEG has set module->func_table for DST__K_RTNEND. Check return of bfd_zalloc. 2022-03-17 Alan Modra asan: Buffer overflow in evax_bfd_print_dst With "name" a char*, the length at name[0] might be negative, escaping buffer limit checks. * vms-alpha.c (evax_bfd_print_dst): Make name an unsigned char*. (evax_bfd_print_emh): Likewise. 2022-03-17 Alan Modra asan: Buffer overflow in som_set_reloc_info * som.c (som_set_reloc_info): Add symcount parameter. Don't access symbols past symcount. Don't access fixup past end_fixups. (som_slurp_reloc_table): Adjust som_set_reloc_info calls. 2022-03-17 Alan Modra asan: use of uninitialized value in buffer_and_nest More occurences of the same as commit d12b8d620c6a. * macro.c (buffer_and_nest): Sanity check length in buffer before calling strncasecmp. 2022-03-17 Alan Modra gprofng configure target tests ${target} in configure.ac should be the canonical target, so that for example, someone configuring with --target=x86_64-linux will match x86_64-*-linux*. * configure.ac: Invoke AC_CANONICAL_TARGET. * libcollector/configure.ac: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * gp-display-html/Makefile.in: Regenerate. * libcollector/Makefile.in: Regenerate. * libcollector/configure: Regenerate. * src/Makefile.in: Regenerate. 2022-03-17 Alan Modra Re: asan: buffer overflow in peXXigen.c In the process of fixing a buffer overflow in commit fe69d4fcf0194a, I managed to introduce a fairly obvious NULL pointer dereference.. * peXXigen.c (_bfd_XX_bfd_copy_private_bfd_data_common): Don't segfault on not finding section. Wrap overlong lines. 2022-03-17 Alan Modra asan: buffer overflows after calling ignore_rest_of_line operand() is not a place that should be calling ignore_rest_of_line. ignore_rest_of_line shouldn't increment input_line_pointer if already at buffer limit. * expr.c (operand): Don't call ignore_rest_of_line. * read.c (s_mri_common): Likewise. (ignore_rest_of_line): Don't increment input_line_pointer if already at buffer_limit. 2022-03-17 Alan Modra Re: bfd: add AMDGCN architecture * po/SRC-POTFILES.in: Regenerate. 2022-03-17 Jan Beulich x86: don't accept base architectures as extensions The -march= intentions are quite clear: A base architecture may be followed by any number of extensions. Accepting a base architecture in place of an extension will at best result in confusion, as the first of the two (or more) items specified simply would not take effect, due to being overridden by the later one(s). 2022-03-17 Jan Beulich x86: never set i386_cpu_flags' "unused" field Setting this field risks cpu_flags_all_zero() mistakenly returning "false" when the object passed in was e.g. the result of ANDing together two objects which had the bit set, or ANDNing together an object with the field set and one with the field clear. While there also avoid setting CpuNo64: Like Cpu64 this is driven differently anyway and hence shouldn't be set anywhere by default. Note that the moving of the two items in i386-gen.c's cpu_flags[] is only for documentation purposes (and slight reducing of overhead), as the fields are sorted anyway upon program start. 2022-03-17 Jan Beulich x86: unify CPU flag on/off processing There's no need for the arbitrary special "unknown" token: Simply recognize the leading ~ and process everything else the same, merely recording whether to set individual fields to 1 or 0. While there exclude CpuIAMCU from CPU_UNKNOWN_FLAGS - CPU_IAMCU_FLAGS override cpu_arch_flags anyway when -march=iamcu is passed, and there's no reason to have the stray flag set even if no insn actually is keyed to it. 2022-03-17 Jan Beulich x86: add another IAMCU testcase Now that {L,K}1OM support is gone, and with it the brokenness in check_cpu_arch_compatible(), put in place a test making sure that only extensions can be enabled via .arch for IAMCU, and that the base architecture cannot be changed. x86: drop L1OM/K1OM support from gas This was only rudimentary support anyway; none of the sub-architecture specific insns were ever supported. x86: assorted IAMCU CPU checking fixes The checks done by check_cpu_arch_compatible() were halfway sensible only at the time where only L1OM support was there. The purpose, however, has always been to prevent bad uses of .arch (turning off the base CPU "feature" flag) while at the same time permitting extensions to be enabled / disabled. In order to achieve this (and to prevent regressions when L1OM and K1OM support are removed) - set CpuIAMCU in CPU_IAMCU_FLAGS, - adjust the IAMCU check in the function itself (the other two similarly broken checks aren't adjusted as they're slated to be removed anyway), - avoid calling the function for extentions (which would never have the base "feature" flag set), - add a new testcase actually exercising ".arch iamcu" (which would also regress with the planned removal). 2022-03-17 GDB Administrator Automatic date update in version.in 2022-03-16 Andrew Burgess gdb: work around prompt corruption caused by bracketed-paste-mode In this commit: commit b4f26d541aa7224b70d363932e816e6e1a857633 Date: Tue Mar 2 13:42:37 2021 -0700 Import GNU Readline 8.1 We imported readline 8.1 into GDB. As a consequence bug PR cli/28833 was reported. This bug spotted that, when the user terminated GDB by sending EOF (usually bound to Ctrl+d), the last prompt would become corrupted. Here's what happens, the user is sat at a prompt like this: (gdb) And then the user sends EOF (Ctrl+d), we now see this: quit) ... gdb terminates, and we return to the shell ... Notice the 'quit' was printed over the prompt. This problem is a result of readline 8.1 enabling bracketed paste mode by default. This problem is present in readline 8.0 too, but in that version of readline bracketed paste mode is off by default, so a user will not see the bug unless they specifically enable the feature. Bracketed paste mode is available in readline 7.0 too, but the bug is not present in this version of readline, see below for why. What causes this problem is how readline disables bracketed paste mode. Bracketed paste mode is a terminal feature that is enabled and disabled by readline emitting a specific escape sequence. The problem for GDB is that the escape sequence to disable bracketed paste mode includes a '\r' character at the end, see this thread for more details: https://lists.gnu.org/archive/html/bug-bash/2018-01/msg00097.html The change to add the '\r' character to the escape sequence used to disable bracketed paste mode was introduced between readline 7.0 and readline 8.0, this is why the bug would not occur when using older versions of readline (note: I don't know if its even possible to build GDB using readline 7.0. That really isn't important, I'm just documenting the history of this issue). So, the escape sequence to disable bracketed paste mode is emitted from the readline function rl_deprep_terminal, this is called after the user has entered a complete command and pressed return, or, if the user sends EOF. However, these two cases are slightly different. In the first case, when the user has entered a command and pressed return, the cursor will have moved to the next, empty, line, before readline emits the escape sequence to leave bracketed paste mode. The final '\r' character moves the cursor back to the beginning of this empty line, which is harmless. For the EOF case though, this is not what happens. Instead, the escape sequence to leave bracketed paste mode is emitted on the same line as the prompt. The final '\r' moves the cursor back to the start of the prompt line. This leaves us ready to override the prompt. It is worth noting, that this is not the intended behaviour of readline, in rl_deprep_terminal, readline should emit a '\n' character when EOF is seen. However, due to a bug in readline this does not happen (the _rl_eof_found flag is never set). This is the first readline bug that effects GDB. GDB prints the 'quit' message from command_line_handler (in event-top.c), this function is called (indirectly) from readline to process the complete command line, but also in the EOF case (in which case the command line is set to nullptr). As this is part of the callback to process a complete command, this is called after readline has disabled bracketed paste mode (by calling rl_deprep_terminal). And so, when bracketed paste mode is in use, rl_deprep_terminal leaves the cursor at the start of the prompt line (in the EOF case), and command_line_handler then prints 'quit', which overwrites the prompt. The solution to this problem is to print the 'quit' message earlier, before rl_deprep_terminal is called. This is easy to do by using the rl_deprep_term_function hook. It is this hook that usually calls rl_deprep_terminal, however, if we replace this with a new function, we can print the 'quit' string, and then call rl_deprep_terminal ourselves. This allows the 'quit' to be printed before rl_deprep_terminal is called. The problem here is that there is no way in rl_deprep_terminal to know if readline is processing EOF or not, and as a result, we don't know when we should print 'quit'. This is the second readline bug that effects GDB. Both of these readline issues are discussed in this thread: https://lists.gnu.org/archive/html/bug-readline/2022-02/msg00021.html The result of that thread was that readline was patched to address both of these issues. Now it should be easy to backport the readline fix to GDB's in tree copy of readline, and then change GDB to make use of these fixes to correctly print the 'quit' string. However, we are just about to branch GDB 12, and there is concern from some that changing readline this close to a new release is a risky idea, see this thread: https://sourceware.org/pipermail/gdb-patches/2022-March/186391.html So, this commit doesn't change readline at all. Instead, this commit is the smallest possible GDB change in order to avoid the prompt corruption. In this commit I change GDB to print the 'quit' string on the line after the prompt, but only when bracketed paste mode is on. This avoids the overwriting issue, the user sees this: (gdb) quit ... gdb terminates, and returns to the shell ... This isn't ideal, but is better than the existing behaviour. After GDB 12 has branched, we can backport the readline fix, and apply a real fix to GDB. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28833 2022-03-16 Fangrui Song objcopy --weaken-symbol: apply to STB_GNU_UNIQUE symbols PR binutils/28926 * objcopy.c (filter_symbols): Apply weaken to STB_GNU_UNIQUE symbols * NEWS: Mention feature. * testsuite/binutils-all/objcopy.exp (objcopy_test_symbol_manipulation): New test. * testsuite/binutils-all/weaken-gnu-unique.s: New. 2022-03-16 Tom Tromey Reimplement array concatenation for Ada and D This started as a patch to implement string concatenation for Ada. However, while working on this, I looked at how this code could possibly be called. It turns out there are only two users of concat_operation: Ada and D. So, in addition to implementing this for Ada, this patch rewrites value_concat, removing the odd "concatenate or repeat" semantics, which were completely unused. As Ada and D both seem to represent strings using TYPE_CODE_ARRAY, this removes the TYPE_CODE_STRING code from there as well. Remove eval_op_concat eval_op_concat has code to search for an operator overload of BINOP_CONCAT. However, the operator overloading code is specific to C++, which does not have this operator. And, binop_types_user_defined_p rejects this case right at the start, and value_x_binop does not handle this case. I think this code has been dead for a very long time. This patch removes it and hoists the remaining call into concatenation::evaluate, removing eval_op_concat entirely. 2022-03-16 Tom Tromey Ada support for wide strings This adds some basic support for Wide_String and Wide_Wide_String to the Ada expression evaluator. In particular, a string literal may be converted to a wide or wide-wide string depending on context. The patch updates an existing test case. Note that another test, namely something like: ptype Wide_Wide_String'("literal") ... would be nice to add, but when tested against a distro GNAT, this did not work (probably due to lack of debuginfo); so, I haven't included it here. 2022-03-16 Tom Tromey Remove eval_op_string eval_op_string is only used in a single place -- the implementation of string_operation. This patch turns it into the string_operation::evaluate method, removing a bit of extraneous code. 2022-03-16 Carl Love Powerpc fix for gdb.base/ending-run.exp The last two tests in gdb.base/ending-run.exp case fail on Powerpc when the system does not have the needed glibc debug-info files loaded. In this case, gdb is not able to determine where execution stopped. This behavior looks as follows for the test case: The next to the last test does a next command when the program is stopped at the closing bracket for main. The message printed is: 0x00007ffff7d01524 in ?? () from /lib/powerpc64le-linux-gnu/libc.so.6 which fails to match any of the test_multiple options. The test then does another next command. On Powerpc, the message printed it: Cannot find bounds of current function The test fails as the output does not match any of the options for the gdb_test_multiple. I checked the behavior on Powerpc to see if this is typical. I ran gdb on the following simple program as shown below. #include int main(void) { printf("Hello, world!\n"); return 0; } gdb ./hello_world Type "apropos word" to search for commands related to "word"... Reading symbols from ./hello_world... (No debugging symbols found in ./hello_world) (gdb) break main Breakpoint 1 at 0x818 (gdb) r Starting program: /home/carll/hello_world [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/powerpc64le-linux-gnu/libthread_db.so.1". Breakpoint 1, 0x0000000100000818 in main () (gdb) n Single stepping until exit from function main, which has no line number information. Hello, world! 0x00007ffff7d01524 in ?? () from /lib/powerpc64le-linux-gnu/libc.so.6 (gdb) n Cannot find bounds of current function So it would seem that the messages seen from the test case are "normal" output for Powerpc when the debug-info is not available. The following patch adds the output from Powerpc as an option to the gdb_test_multiple statement, identifying the output as the expected output on Powerpc without the needed debug-info files installed. The patch has been tested on a Power 10 system and an Intel 64-bit system. No additional regression failures were seen on either platform. 2022-03-16 Martin Storsj? dlltool: Use the output name as basis for deterministic temp prefixes PR 28885 * dlltool.c (main): use imp_name rather than dll_name when generating a temporary file name. 2022-03-16 Jan Vrany Andrew Burgess gdb/mi: consistently notify user when GDB/MI client uses -thread-select GDB notifies users about user selected thread changes somewhat inconsistently as mentioned on gdb-patches mailing list here: https://sourceware.org/pipermail/gdb-patches/2022-February/185989.html Consider GDB debugging a multi-threaded inferior with both CLI and GDB/MI interfaces connected to separate terminals. Assuming inferior is stopped and thread 1 is selected, when a thread 2 is selected using '-thread-select 2' command on GDB/MI terminal: -thread-select 2 ^done,new-thread-id="2",frame={level="0",addr="0x00005555555551cd",func="child_sub_function",args=[],file="/home/jv/Projects/gdb/users_jv_patches/gdb/testsuite/gdb.mi/user-selected-context-sync.c",fullname="/home/uuu/gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c",line="30",arch="i386:x86-64"} (gdb) and on CLI terminal we get the notification (as expected): [Switching to thread 2 (Thread 0x7ffff7daa640 (LWP 389659))] #0 child_sub_function () at /home/uuu/gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c:30 30 volatile int dummy = 0; However, now that thread 2 is selected, if thread 1 is selected using 'thread-select --thread 1 1' command on GDB/MI terminal terminal: -thread-select --thread 1 1 ^done,new-thread-id="1",frame={level="0",addr="0x0000555555555294",func="main",args=[],file="/home/jv/Projects/gdb/users_jv_patches/gdb/testsuite/gdb.mi/user-selected-context-sync.c",fullname="/home/jv/Projects/gdb/users_jv_patches/gdb/testsuite/gdb.mi/user-selected-context-sync.c",line="66",arch="i386:x86-64"} (gdb) but no notification is printed on CLI terminal, despite the fact that user selected thread has changed. The problem is that when `-thread-select --thread 1 1` is executed then thread is switched to thread 1 before mi_cmd_thread_select () is called, therefore the condition "inferior_ptid != previous_ptid" there does not hold. To address this problem, we have to move notification logic up to mi_cmd_execute () where --thread option is processed and notify user selected contents observers there if context changes. However, this in itself breaks GDB/MI because it would cause context notification to be sent on MI channel. This is because by the time we notify, MI notification suppression is already restored (done in mi_command::invoke(). Therefore we had to lift notification suppression logic also up to mi_cmd_execute (). This change in made distinction between mi_command::invoke() and mi_command::do_invoke() unnecessary as all mi_command::invoke() did (after the change) was to call do_invoke(). So this patches removes do_invoke() and moves the command execution logic directly to invoke(). With this change, all gdb.mi tests pass, tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=20631 2022-03-16 H.J. Lu gprofng: Use symver attribute if available Use symver attribute if available, instead of asm statement, to support LTO build. PR gprof/28962 * libcollector/dispatcher.c (timer_create@@GLIBC_2.3.3): Use SYMVER_ATTRIBUTE. (timer_create@GLIBC_2.2): Likewise. (timer_create@GLIBC_2.2.5): Likewise. (pthread_create@@GLIBC_2.1): Likewise. (pthread_create@GLIBC_2.0): Likewise. * libcollector/iotrace.c (open64@@GLIBC_2.2): Likewise. (open64@GLIBC_2.1): Likewise. (fopen@@GLIBC_2.1): Likewise. (fopen@GLIBC_2.0): Likewise. (fclose@@GLIBC_2.1): Likewise. (fclose@GLIBC_2.0): Likewise. (fdopen@@GLIBC_2.1): Likewise. (fdopen@GLIBC_2.0): Likewise. (pread@@GLIBC_2.2): Likewise. (pread@GLIBC_2.1): Likewise. (pwrite@@GLIBC_2.2): Likewise. (pwrite@GLIBC_2.1): Likewise. (pwrite64@@GLIBC_2.2): Likewise. (pwrite64@GLIBC_2.1): Likewise. (fgetpos@@GLIBC_2.2): Likewise. (fgetpos@GLIBC_2.0): Likewise. (fgetpos64@@GLIBC_2.2): Likewise. (fgetpos64@GLIBC_2.1): Likewise. (fsetpos@@GLIBC_2.2): Likewise. (fsetpos@GLIBC_2.0): Likewise. (fsetpos64@@GLIBC_2.2): Likewise. (fsetpos64@GLIBC_2.1): Likewise. * libcollector/linetrace.c (posix_spawn@@GLIBC_2.15): Likewise. (posix_spawn@GLIBC_2.2): Likewise. (posix_spawn@GLIBC_2.2.5): Likewise. (posix_spawnp@@GLIBC_2.15): Likewise. (posix_spawnp@GLIBC_2.2): Likewise. (posix_spawnp@GLIBC_2.2.5): Likewise. (popen@@GLIBC_2.1): Likewise. (popen@GLIBC_2.0): Likewise. (_popen@@GLIBC_2.1): Likewise. (_popen@GLIBC_2.0): Likewise. * libcollector/mmaptrace.c (dlopen@@GLIBC_2.1): Likewise. (dlopen@GLIBC_2.0): Likewise. * libcollector/synctrace.c (pthread_cond_wait@@GLIBC_2.3.2): Likewise. (pthread_cond_wait@GLIBC_2.0): Likewise. (pthread_cond_wait@GLIBC_2.2.5): Likewise. (pthread_cond_wait@GLIBC_2.2): Likewise. (pthread_cond_timedwait@@GLIBC_2.3.2): Likewise. (pthread_cond_timedwait@GLIBC_2.0): Likewise. (pthread_cond_timedwait@GLIBC_2.2.5): Likewise. (pthread_cond_timedwait@GLIBC_2.2): Likewise. (sem_wait@@GLIBC_2.1): Likewise. (sem_wait@GLIBC_2.0): Likewise. * src/collector_module.h (SYMVER_ATTRIBUTE): New. 2022-03-16 H.J. Lu gprofng: Don't hardcode -Wno-format-truncation/-Wno-switch Use -Wno-format-truncation and -Wno-switch only if they are supported. PR gprof/28969 * configure.ac (GPROFNG_NO_FORMAT_TRUNCATION_CFLAGS): New AC_SUBST for -Wno-format-truncation. (GPROFNG_NO_SWITCH_CFLAGS): New AC_SUBST for -Wno-switch. * Makefile.in: Regenerate. * configure: Likewise. * src/Makefile.am (AM_CFLAGS): Replace -Wno-format-truncation and -Wno-switch with GPROFNG_NO_FORMAT_TRUNCATION_CFLAGS and GPROFNG_NO_SWITCH_CFLAGS. * src/Makefile.in: Regenerate. 2022-03-16 H.J. Lu gprofng: Don't hardcode -Wno-nonnull-compare Use -Wno-nonnull-compare only if it is supported. PR gprof/28969 * libcollector/Makefile.am (AM_CFLAGS): Replace -Wno-nonnull-compare with GPROFNG_NO_NONNULL_COMPARE_CFLAGS. * libcollector/configure.ac (GPROFNG_NO_NONNULL_COMPARE_CFLAGS): New AC_SUBST for -Wno-nonnull-compare. * libcollector/Makefile.in: Regenerate. * libcollector/aclocal.m4: Likewise. * libcollector/configure: Likewise. 2022-03-16 H.J. Lu gprofng: Define ATTRIBUTE_FALLTHROUGH Define ATTRIBUTE_FALLTHROUGH to __attribute__ ((fallthrough)) only for GCC 7 or above. PR gprof/28969 * common/gp-defs.h (ATTRIBUTE_FALLTHROUGH): New. * src/gp-collect-app.cc (collect::check_args): Replace /* FALLTHROUGH */ with ATTRIBUTE_FALLTHROUGH. 2022-03-16 Simon Marchi binutils/readelf: handle AMDGPU relocation types Make readelf recognize AMDGPU relocation types, as documented here: https://llvm.org/docs/AMDGPUUsage.html#amdgpu-relocation-records The user-visible change looks like: -000000000004 000400000001 unrecognized: 1 0000000000000000 SCRATCH_RSRC_DWORD0 -00000000000c 000500000001 unrecognized: 1 0000000000000000 SCRATCH_RSRC_DWORD1 -000000000014 000600000007 unrecognized: 7 0000000000000000 global_var0 -00000000001c 000700000008 unrecognized: 8 0000000000000000 global_var1 -000000000024 000800000009 unrecognized: 9 0000000000000000 global_var2 -00000000002c 00090000000a unrecognized: a 0000000000000000 global_var3 -000000000034 000a0000000b unrecognized: b 0000000000000000 global_var4 +000000000004 000400000001 R_AMDGPU_ABS32_LO 0000000000000000 SCRATCH_RSRC_DWORD0 +00000000000c 000500000001 R_AMDGPU_ABS32_LO 0000000000000000 SCRATCH_RSRC_DWORD1 +000000000014 000600000007 R_AMDGPU_GOTPCREL 0000000000000000 global_var0 +00000000001c 000700000008 R_AMDGPU_GOTPCREL 0000000000000000 global_var1 +000000000024 000800000009 R_AMDGPU_GOTPCREL 0000000000000000 global_var2 +00000000002c 00090000000a R_AMDGPU_REL32_LO 0000000000000000 global_var3 +000000000034 000a0000000b R_AMDGPU_REL32_HI 0000000000000000 global_var4 binutils/ChangeLog: * readelf.c (dump_relocations): Handle EM_AMDGPU. include/ChangeLog: * elf/amdgpu.h: Add relocation values. Change-Id: I2ed4589f4cd37ea11ad2e0cb38d4b682271e1334 2022-03-16 Simon Marchi binutils/readelf: build against msgpack, dump NT_AMDGPU_METADATA note contents The AMDGPU HSA OS ABI (code object v3 and above) defines the NT_AMDGPU_METADATA ELF note [1]. The content is a msgpack object describing, among other things, the kernels present in the code object and how to call them. I think it would be useful for readelf to be able to display the content of those notes. msgpack is a structured format, a bit like JSON, except not text-based. It is therefore possible to dump the contents in human-readable form without knowledge of the specific layout of the note. Add configury to binutils to optionally check for the msgpack C library [2]. Add There is a new --with{,out}-msgpack configure flag, and the actual library lookup is done using pkg-config. If msgpack support is enabled, dumping a NT_AMDGPU_METADATA note looks like: $ readelf --notes amdgpu-code-object Displaying notes found in: .note Owner Data size Description AMDGPU 0x0000040d NT_AMDGPU_METADATA (code object metadata) { "amdhsa.kernels": [ { ".args": [ { ".address_space": "global", ".name": "out.coerce", ".offset": 0, ".size": 8, ".value_kind": "global_buffer", }, If msgpack support is disabled, dump the contents as hex, as is done with notes that are not handled in a special way. This allows one to decode the contents manually (maybe using a command-line msgpack decoder) if really needed. [1] https://llvm.org/docs/AMDGPUUsage.html#code-object-metadata [2] https://github.com/msgpack/msgpack-c/tree/c_master binutils/ChangeLog: * Makefile.am (readelf_CFLAGS): New. (readelf_LDADD): Add MSGPACK_LIBS. * Makefile.in: Re-generate. * config.in: Re-generate. * configure: Re-generate. * configure.ac: Add --with-msgpack flag and check for msgpack using pkg-config. * readelf.c: Include msgpack.h if HAVE_MSGPACK. (print_note_contents_hex): New. (print_indents): New. (dump_msgpack_obj): New. (dump_msgpack): New. (print_amdgpu_note): New. (process_note): Handle NT_AMDGPU_METADATA note contents. Use print_note_contents_hex. Change-Id: Ia60a654e620bc32dfdb1bccd845594e2af328b84 2022-03-16 Simon Marchi binutils/readelf: handle NT_AMDGPU_METADATA note name Handle the NT_AMDGPU_METADATA note, which is described here: https://llvm.org/docs/AMDGPUUsage.html#code-object-v3-note-records As of this patch, just print out the name, not the contents, which is in the msgpack format. binutils/ChangeLog: * readelf.c (get_amdgpu_elf_note_type): New. (process_note): Handle "AMDGPU" notes. include/ChangeLog: * elf/amdgcn.h (NT_AMDGPU_METADATA): New. Change-Id: Id2dba2e2aeaa55ef7464fb35aee9c7d5f96ddb23 2022-03-16 Simon Marchi binutils/readelf: decode AMDGPU-specific e_flags Decode and print the AMDGPU-specific fields of e_flags, as documented here: https://llvm.org/docs/AMDGPUUsage.html#header That is: - The specific GPU model - Whether the xnack and sramecc features are enabled The result looks like: - Flags: 0x52f + Flags: 0x52f, gfx906, xnack any, sramecc any The flags for the "HSA" OS ABI are properly versioned and documented on that page. But the NONE, PAL and MESA3D OS ABIs are not well documented nor versioned. Taking a peek at the LLVM source code, we see that they encode their flags the same way as HSA v3. For example, for PAL: https://github.com/llvm/llvm-project/blob/c8b614cd74a92d85936aed5ac7c642af75ffdc29/llvm/lib/Target/AMDGPU/MCTargetDesc/AMDGPUTargetStreamer.cpp#L601 So for those other OS ABIs, we read them the same as HSA v3. binutils/ChangeLog: * readelf.c: Include elf/amdgcn.h. (decode_AMDGPU_machine_flags): New. (get_machine_flags): Handle flags for EM_AMDGPU machine type. include/ChangeLog: * elf/amdgcn.h: Add EF_AMDGPU_MACH_AMDGCN_* and EF_AMDGPU_FEATURE_* defines. Change-Id: Ib5b94df7cae0719a22cf4e4fd0629330e9485c12 2022-03-16 Simon Marchi binutils/readelf: handle AMDGPU OS ABIs When the machine is EM_AMDGPU, handle the various OS ABIs described here: https://llvm.org/docs/AMDGPUUsage.html#header For a binary with the HSA OS ABI, the change looks like: - OS/ABI: + OS/ABI: AMD HSA binutils/ChangeLog: * readelf.c (get_osabi_name): Handle EM_AMDGPU OS ABIs. include/ChangeLog: * elf/common.h (ELFOSABI_AMDGPU_PAL, ELFOSABI_AMDGPU_MESA3D): New. Change-Id: I383590c390f7dc2fe0f902f50038735626d71863 2022-03-16 Simon Marchi opcodes: handle bfd_amdgcn_arch in configure script There isn't an actual opcodes implementation for the AMDGCN arch (yet), this is just the bare minimum to get $ ./configure --target=amdgcn-hsa-amdhsa --disable-gas $ make all-binutils working later in this series. opcodes/ChangeLog: * configure.ac: Handle bfd_amdgcn_arch. * configure: Re-generate. Change-Id: Ib7d7c5533a803ed8b2a293e9275f667ed781ce79 2022-03-16 Simon Marchi bfd: add AMDGCN architecture Add support for the AMDGCN architecture to BFD. This is the bare minimum to get $ ./configure --target=amdgcn-hsa-amdhsa --disable-gas $ make all-binutils working later in this series. The specific AMDGCN models added here are a bit arbitrary, based on what we intend to initially support in GDB. This list will need to be updated in the future anyway. The complete up-to-date list of existing AMDGPU models can be found here: https://llvm.org/docs/AMDGPUUsage.html#processors The ELF format for this architecture is documented here: https://llvm.org/docs/AMDGPUUsage.html#elf-code-object The flags for the "HSA" OS ABI are properly versioned and documented on that page. But the NONE, PAL and MESA3D OS ABIs are not well documented nor versioned. Taking a peek at the LLVM source code, we see that they encode their flags the same way as HSA v3. For example, for PAL: https://github.com/llvm/llvm-project/blob/c8b614cd74a92d85936aed5ac7c642af75ffdc29/llvm/lib/Target/AMDGPU/MCTargetDesc/AMDGPUTargetStreamer.cpp#L601 So at least, we know that all AMDGPU objects (of which AMDGCN objects are a subset of) at the time of writing encode the specific GPU model in the EF_AMDGPU_MACH field of e_flags. bfd/ChangeLog: * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add cpu-amdgcn.c. (BFD64_BACKENDS): Add elf64-amdgcn.lo. (BFD64_BACKENDS_CFILES): Add elf64-amdgcn.c. * Makefile.in: Re-generate. * cpu-amdgcn.c: New. * elf64-amdgcn.c: New. * archures.c (bfd_architecture): Add bfd_arch_amdgcn and related mach defines. (bfd_amdgcn_arch): New. (bfd_archures_list): Add bfd_amdgcn_arch. * bfd-in2.h: Re-generate. * config.bfd: Handle amdgcn* target. * configure.ac: Handle amdgcn_elf64_le_vec. * configure: Re-generate. * elf-bfd.h (elf_target_id): Add AMDGCN_ELF_DATA. * targets.c (amdgcn_elf64_le_vec): New. (_bfd_target_vector): Add amdgcn_elf64_le_vec. include/ChangeLog: * elf/amdgpu.h: New. * elf/common.h (ELFOSABI_AMDGPU_HSA): Add. Change-Id: I969f7b14960797e88891c308749a6e341eece5b2 2022-03-16 Nick Clifton Updated Serbian (for binutils/) and Russian (for gprof/) translations 2022-03-16 Pedro Alves Make gdb.fortran/{array-slices,lbound-ubound} work against gdbserver gdb.fortran/array-slices.exp and gdb.fortran/lbound-ubound.exp were recently disabled unless testing with the native target, because they rely on inferior I/O. However, when testing against gdbserver using the native-gdbserver/native-extended-gdbserver boards, we do have access to inferior I/O. The right way to check whether the board can do I/O, is via checking the gdb,noinferiorio board variable. Switch to using that. And then, tweak the testcases to expect output to appear in inferior_spawn_id, instead of gdb_spawn_id. When testing against the native target, inferior_spawn_id is the same as gdb_spawn_id. When testing against gdbserver, it maps to gdbserver_spawn_id. This exposed a buglet in gdb.fortran/array-slices.f90's show_1d subroutine -- it was missing printing newline at the end of the "Expected GDB Output" text, leading to a test timeout. All other subroutines end with advance=yes, except this one. Fix it by using advance=yes here too. Change-Id: I4640729f334431cfc24b0917e7d3977b677c6ca5 2022-03-16 GDB Administrator Automatic date update in version.in 2022-03-15 Alan Modra Delete PowerPC macro insn support Let's hope this stays dead, but it's here as a patch separate from those that removed use of powerpc_macros just in case it needs to be resurrected. include/ * opcode/ppc.h (struct powerpc_macro): Delete declaration. (powerpc_macros, powerpc_num_macros): Likewise.. opcodes/ * ppc-opc.c (powerpc_macros, powerpc_num_macros): Delete. gas/ * config/tc-ppc.c (ppc_macro): Delete function. (ppc_macro_hash): Delete. (ppc_setup_opcodes, md_assemble): Delete macro support. 2022-03-15 Alan Modra PowerPC SPE/SPE2 aliases in powerpc_macros * ppc-opc.c (powerpc_macros): Move "evsadd", "evssub", "evsabs", "evsnabs", "evsneg", "evsmul", "evsdiv", "evscmpgt", "evsgmplt", "evsgmpeq", "evscfui", "evscfsi", "evscfuf", "evscfsf", "evsctui", "evsctsi", "evsctuf", "evsctsf", "evsctuiz", "evsctsiz", "evststgt", "evststlt", "evststeq".. (powerpc_opcodes): ..to here. (powerpc_macros): Move "evdotphsssi", "evdotphsssia", "evdotpwsssi", and "evdotpwsssia".. (spe2_opcodes): ..to here. 2022-03-15 Alan Modra PowerPC VLE extended instructions in powerpc_macros This moves VLE insn out of the macro table. "e_slwi" and "e_srwi" already exist in vle_opcodes as distinct instructions rather than encodings of e_rlwinm. opcodes/ * ppc-opc.c (vle_opcodes): Typo fix e_rlwinm operand. Add "e_inslwi", "e_insrwi", "e_rotlwi", "e_rotrwi", "e_clrlwi", "e_clrrwi", "e_extlwi", "e_extrwi", and "e_clrlslwi". (powerpc_macros): Delete same. Delete "e_slwi" and "e_srwi" too. gas/ * testsuite/gas/ppc/vle-simple-5.d: Update. 2022-03-15 Alan Modra PowerPC32 extended instructions in powerpc_macros As for PowerPC64, move instructions to the main opcode table. opcodes/ * ppc-opc.c (insert_crwn, extract_crwn, insert_elwn, extract_elwn), (insert_erwn, extract_erwn, insert_erwb, extract_erwb), (insert_cslwn, extract_cslwb, insert_ilwb, extract_ilwn), (insert_irwb, extract_irwn, insert_rrwn, extract_rrwn), (insert_slwn, extract_slwn, insert_srwn, extract_srwn): New functions. (CRWn, ELWn, ERWn, ERWb, CSLWb, CSLWn, ILWn, ILWb, IRWn, IRWb), (RRWn, SLWn, SRWn): Define and add powerpc_operands entries. (MMB_MASK, MME_MASK, MSHMB_MASK): Define. (powerpc_opcodes): Add "inslwi", "insrwi", "rotrwi", "clrrwi", "slwi", "srwi", "extlwi", "extrwi", "sli", "sri" and corresponding record (ie. dot suffix) forms. (powerpc_macros): Delete same. gas/ * testsuite/gas/ppc/476.d: Update. * testsuite/gas/ppc/simpshft.d: Update. 2022-03-15 Alan Modra PowerPC64 extended instructions in powerpc_macros The extended instructions implemented in powerpc_macros aren't used by the disassembler. That means instructions like "sldi r3,r3,2" appear in disassembly as "rldicr r3,r3,2,61", which is annoying since many other extended instructions are shown. Note that some of the instructions moved out of the macro table to the opcode table won't appear in disassembly, because they are aliases rather than a subset of the underlying raw instruction. If enabled, rotrdi, extrdi, extldi, clrlsldi, and insrdi would replace all occurrences of rotldi, rldicl, rldicr, rldic and rldimi. (Or many occurrences in the case of clrlsldi if n <= b was added to the extract functions.) The patch also fixes a small bug in opcode sanity checking. include/ * opcode/ppc.h (PPC_OPSHIFT_SH6): Define. opcodes/ * ppc-opc.c (insert_erdn, extract_erdn, insert_eldn, extract_eldn), (insert_crdn, extract_crdn, insert_rrdn, extract_rrdn), (insert_sldn, extract_sldn, insert_srdn, extract_srdn), (insert_erdb, extract_erdb, insert_csldn, extract_csldb), (insert_irdb, extract_irdn): New functions. (ELDn, ERDn, ERDn, RRDn, SRDn, ERDb, CSLDn, CSLDb, IRDn, IRDb): Define and add associated powerpc_operands entries. (powerpc_opcodes): Add "rotrdi", "srdi", "extrdi", "clrrdi", "sldi", "extldi", "clrlsldi", "insrdi" and corresponding record (ie. dot suffix) forms. (powerpc_macros): Delete same from here. gas/ * config/tc-ppc.c (insn_validate): Don't modify value passed to operand->insert for PPC_OPERAND_PLUS1 when calculating mask. Handle PPC_OPSHIFT_SH6. * testsuite/gas/ppc/prefix-reloc.d: Update. * testsuite/gas/ppc/simpshft.d: Update. ld/ * testsuite/ld-powerpc/elfv2so.d: Update. * testsuite/ld-powerpc/notoc.d: Update. * testsuite/ld-powerpc/notoc3.d: Update. * testsuite/ld-powerpc/tlsdesc2.d: Update. * testsuite/ld-powerpc/tlsget.d: Update. * testsuite/ld-powerpc/tlsget2.d: Update. * testsuite/ld-powerpc/tlsopt5.d: Update. * testsuite/ld-powerpc/tlsopt6.d: Update. 2022-03-15 Tom Tromey Do not capture updated 'pc' in add_local_symbols Simon pointed out that commit 13835d88 ("Use function view when iterating over block symbols") caused a regression. The bug is that the new closure captures 'pc' by reference, but later code updates this variable -- but the earlier code did not update the callback structure with the new value. This patch restores the old behavior by using a new varible name in an inner scope. 2022-03-15 Jose E. Marchesi gprofng: avoid using `fallthrough' attributes gprofng didn't build with gcc 6.3 due to the usage of __attribute__ ((fallthrough)). This patch uses /* FALLTHROUGH */ instead. 2022-03-15 Jose E. Marchesi * gprofng/src/gp-collect-app.cc (collect::check_args): Use fallthrough comment instead of attribute. 2022-03-15 Tom Tromey Fix bug in dwarf-mode.el I noticed that, occasionally, dwarf-mode would think that the objdump subprocess was still running after it had clearly exited. I managed to reliably reproduce this today and learned that a process sentinel is not guaranteed to be run with the current buffer set to the process buffer. This patch fixes the problem. I've bumped the version number of dwarf-mode.el to make it easier to install for users who already have an earlier one installed. I'm checking this in. 2022-03-15 Tom Tromey * dwarf-mode.el: Now 1.7. (dwarf--sentinel): Switch to the process buffer. 2022-03-15 Andrew Burgess gdb/testsuite: rename a proc and fix a typo Rename a proc in gdb.mi/user-selected-context-sync.exp, I think the old name was most likely a typo. The old name match_re_or_ensure_not_output seems (to me) to imply we're in some way checking that the regexp was not output. But that's not what we are doing, we're checking either for the regexp, or for no output, hence the new name match_re_or_ensure_no_output. Additionally, I found a definite typo in one of the comments that I've also fixed. I also updated some test names. These tests (probably due to copy & paste errors) has 'on MI' on their name, when they were actually checking CLI output. For these test I changed the name to use 'on CLI'. There should be no change in what is tested after this commit. 2022-03-15 Nick Clifton gprofng: Add a configure test for clock_gettime and a use of the test in getthrtime.c 2022-03-15 H.J. Lu gprofng: Don't generate gprofng.info in source Add info-in-builddir to AUTOMAKE_OPTIONS. PR gprof/28967 * doc/Makefile.am (AUTOMAKE_OPTIONS): Add info-in-builddir. * doc/Makefile.in: Regenerate. 2022-03-15 Tiezhu Yang gdb: LoongArch: fix failed testcases in gdb.base/align-c.exp When execute the following command on LoongArch: make check-gdb TESTS="gdb.base/align-c.exp" there exist some failed testcases: ... FAIL: gdb.base/align-c.exp: print _Alignof(struct align_pair_long_double_x_float) FAIL: gdb.base/align-c.exp: print _Alignof(struct align_pair_long_double_x_double) FAIL: gdb.base/align-c.exp: print _Alignof(struct align_pair_long_double_x_long_double) ... According to LoongArch ELF ABI specification [1], set the target data types of floating-point to fix the above failed testcases. [1] https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html 2022-03-15 GDB Administrator Automatic date update in version.in 2022-03-14 Andrew Burgess gdb/python/mi: create MI commands using python This commit allows a user to create custom MI commands using Python similarly to what is possible for Python CLI commands. A new subclass of mi_command is defined for Python MI commands, mi_command_py. A new file, gdb/python/py-micmd.c contains the logic for Python MI commands. This commit is based on work linked too from this mailing list thread: https://sourceware.org/pipermail/gdb/2021-November/049774.html Which has also been previously posted to the mailing list here: https://sourceware.org/pipermail/gdb-patches/2019-May/158010.html And was recently reposted here: https://sourceware.org/pipermail/gdb-patches/2022-January/185190.html The version in this patch takes some core code from the previously posted patches, but also has some significant differences, especially after the feedback given here: https://sourceware.org/pipermail/gdb-patches/2022-February/185767.html A new MI command can be implemented in Python like this: class echo_args(gdb.MICommand): def invoke(self, args): return { 'args': args } echo_args("-echo-args") The 'args' parameter (to the invoke method) is a list containing (almost) all command line arguments passed to the MI command (--thread and --frame are handled before the Python code is called, and removed from the args list). This list can be empty if the MI command was passed no arguments. When used within gdb the above command produced output like this: (gdb) -echo-args a b c ^done,args=["a","b","c"] (gdb) The 'invoke' method of the new command must return a dictionary. The keys of this dictionary are then used as the field names in the mi command output (e.g. 'args' in the above). The values of the result returned by invoke can be dictionaries, lists, iterators, or an object that can be converted to a string. These are processed recursively to create the mi output. And so, this is valid: class new_command(gdb.MICommand): def invoke(self,args): return { 'result_one': { 'abc': 123, 'def': 'Hello' }, 'result_two': [ { 'a': 1, 'b': 2 }, { 'c': 3, 'd': 4 } ] } Which produces output like: (gdb) -new-command ^done,result_one={abc="123",def="Hello"},result_two=[{a="1",b="2"},{c="3",d="4"}] (gdb) I have required that the fields names used in mi result output must match the regexp: "^[a-zA-Z][-_a-zA-Z0-9]*$" (without the quotes). This restriction was never written down anywhere before, but seems sensible to me, and we can always loosen this rule later if it proves to be a problem. Much harder to try and add a restriction later, once people are already using the API. What follows are some details about how this implementation differs from the original patch that was posted to the mailing list. In this patch, I have changed how the lifetime of the Python gdb.MICommand objects is managed. In the original patch, these object were kept alive by an owned reference within the mi_command_py object. As such, the Python object would not be deleted until the mi_command_py object itself was deleted. This caused a problem, the mi_command_py were held in the global mi command table (in mi/mi-cmds.c), which, as a global, was not cleared until program shutdown. By this point the Python interpreter has already been shutdown. Attempting to delete the mi_command_py object at this point was causing GDB to try and invoke Python code after finalising the Python interpreter, and we would crash. To work around this problem, the original patch added code in python/python.c that would search the mi command table, and delete the mi_command_py objects before the Python environment was finalised. In contrast, in this patch, I have added a new global dictionary to the gdb module, gdb._mi_commands. We already have several such global data stores related to pretty printers, and frame unwinders. The MICommand objects are placed into the new gdb.mi_commands dictionary, and it is this reference that keeps the objects alive. When GDB's Python interpreter is shut down gdb._mi_commands is deleted, and any MICommand objects within it are deleted at this point. This change avoids having to make the mi_cmd_table global, and walk over it from within GDB's python related code. This patch handles command redefinition entirely within GDB's python code, though this does impose one small restriction which is not present in the original code (detailed below), I don't think this is a big issue. However, the original patch relied on being able to finish executing the mi_command::do_invoke member function after the mi_command object had been deleted. Though continuing to execute a member function after an object is deleted is well defined, it is also (IMHO) risky, its too easy for someone to later add a use of the object without realising that the object might sometimes, have been deleted. The new patch avoids this issue. The one restriction that is added to avoid this, is that an MICommand object can't be reinitialised with a different command name, so: (gdb) python cmd = MyMICommand("-abc") (gdb) python cmd.__init__("-def") can't reinitialize object with a different command name This feels like a pretty weird edge case, and I'm happy to live with this restriction. I have also changed how the memory is managed for the command name. In the most recently posted patch series, the command name is moved into a subclass of mi_command, the python mi_command_py, which inherits from mi_command is then free to use a smart pointer to manage the memory for the name. In this patch, I leave the mi_command class unchanged, and instead hold the memory for the name within the Python object, as the lifetime of the Python object always exceeds the c++ object stored in the mi_cmd_table. This adds a little more complexity in py-micmd.c, but leaves the mi_command class nice and simple. Next, this patch adds some extra functionality, there's a MICommand.name read-only attribute containing the name of the command, and a read-write MICommand.installed attribute that can be used to install (make the command available for use) and uninstall (remove the command from the mi_cmd_table so it can't be used) the command. This attribute will be automatically updated if a second command replaces an earlier command. This patch adds additional error handling, and makes more use the gdbpy_handle_exception function. Co-Authored-By: Jan Vrany 2022-03-14 Andrew Burgess gdb/gdbarch: compare some fields against 0 verify_gdbarch After the previous commit, which removes the predicate function gdbarch_register_type_p, I noticed that the gdbarch->register_type field was not checked at in the verify_gdbarch function. More than not being checked, the field wasn't mentioned at all. I find this strange, I would expect that every field would at least be mentioned - we already generate comments for some fields saying that this field is _not_ being checked, so the fact that this field isn't being checked looks (to me), like this field is somehow slipping through the cracks. The comment at the top of gdbarch-components.py tries to explain how the validation is done. I didn't understand this comment completely, but, I think this final sentence: "Otherwise, the check is done against 0 (really NULL for function pointers, but same idea)." Means that, if non of the other cases apply, then the field should be checked against 0, with 0 indicating that the field is invalid (was not set by the tdep code). However, this is clearly not being done. Looking in gdbarch.py at the code to generate verify_gdbarch we do find that there is a case that is not handled, the case where the 'invalid' field is set true True, but non of the other cases apply. In this commit I propose two changes: 1. Handle the case where the 'invalid' field of a property is set to True, this should perform a check for the field of gdbarch still being set to 0, and 2. If the if/else series that generates verify_gdbarch doesn't handle a property then we should raise an exception. This means that if a property is added which isn't handled, we should no longer silently ignore it. After doing this, I re-generated the gdbarch files and saw that the following gdbarch fields now had new validation checks: register_type believe_pcc_promotion register_to_value value_to_register frame_red_zone_size displaced_step_restore_all_in_ptid solib_symbols_extension Looking at how these are currently set in the various -tdep.c files, I believe the only one of these that is required to be set for all architectures is the register_type field. And so, for all of the other fields, I've changed the property definition on gdbarch-components.py, setting the 'invalid' field to False. Now, after re-generation, the register_type field is checked against 0, thus an architecture that doesn't set_gdbarch_register_type will now fail during validation. For all the other fields we skip the validation, in which case, it is find for an architecture to not set this field. My expectation is that there should be no user visible changes after this commit. Certainly for all fields except register_type, all I've really done is cause some extra comments to be generated, so I think that's clearly fine. For the register_type field, my claim is that any architecture that didn't provide this would fail when creating its register cache, and I couldn't spot an architecture that doesn't provide this hook. As such, I think this change should be fine too. 2022-03-14 Andrew Burgess gdb/gdbarch: remove the predicate function for gdbarch_register_type I don't believe that the gdbarch_register_type_p predicate is called anywhere in GDB, and the gdbarch_register_type function is called without checking the gdbarch_register_type_p predicate function everywhere it is used, for example in init_regcache_descr (regcache.c). My claim is that the gdbarch_register_type function is required for every architecture, and GDB will not work if this function is not supplied. And so, in this commit, I remove the 'predicate=True' from gdbarch-components.py for the 'register_type' field, and regenerate the gdbarch files. There should be no user visible changes after this commit. 2022-03-14 Patrick Monnerat Replace deprecated_target_wait_hook by observers Commit b60cea7 (Make target_wait options use enum flags) broke deprecated_target_wait_hook usage: there's a commit comment telling this hook has not been converted. Rather than trying to mend it, this patch replaces the hook by two target_wait observers: target_pre_wait (ptid_t ptid) target_post_wait (ptid_t event_ptid) Upon target_wait entry, target_pre_wait is notified with the ptid passed to target_wait. Upon exit, target_post_wait is notified with the event ptid returned by target_wait. Should an exception occur, event_ptid is null_ptid. This change benefits to Insight (out-of-tree): there's no real use of the late hook in gdb itself. 2022-03-14 Tom Tromey Correctly print subrange types in generic_value_print I noticed that generic_value_print assumes that a subrange type is always a subrange of an integer type. However, this isn't necessarily the case. In Ada, for example, one has subranges of character and enumeration types. This code isn't often exercised, I think, because languages with real subrange types tend to implement their own printers. However, it still seemed worth fixing. 2022-03-14 Luis Machado [aarch64/arm] Properly extract the return value returned in memory When running gdb.cp/non-trivial-retval.exp, the following shows up for both aarch64-linux and armhf-linux: Breakpoint 3, f1 (i1=23, i2=100) at src/gdb/testsuite/gdb.cp/non-trivial-retval.cc:35 35 A a; (gdb) finish Run till exit from #0 f1 (i1=23, i2=100) at src/gdb/testsuite/gdb.cp/non-trivial-retval.cc:35 main () at /src/gdb/testsuite/gdb.cp/non-trivial-retval.cc:163 163 B b = f2 (i1, i2); Value returned is $6 = {a = -11952} (gdb) The return value should be {a = 123} instead. This happens because the backends don't extract the return value from the correct location. GDB should fetch a pointer to the memory location from X8 for aarch64 and r0 for armhf. With the patch, gdb.cp/non-trivial-retval.exp has full passes on aarch64-linux and armhf-linux on Ubuntu 20.04/18.04. The problem only shows up with the "finish" command. The "call" command works correctly and displays the correct return value. This is also related to PR gdb/28681 (https://sourceware.org/bugzilla/show_bug.cgi?id=28681) and fixes FAIL's in gdb.ada/mi_var_array.exp. A new testcase is provided, and it exercises GDB's ability to "finish" a function that returns a large struct (> 16 bytes) and display the contents of this struct correctly. This has always been incorrect for these backends, but no testcase exercised this particular scenario. 2022-03-14 GDB Administrator Automatic date update in version.in 2022-03-13 Alan Modra PR28959, obdump doesn't disassemble mftb instruction Without a -M cpu option given, powerpc objdump defaults currently to -Mpower10 but -Many is also given. Commit 1ff6a3b8e562 regressed -Many disassembly of instructions that are encoded differently depending on cpu, such as mftb which has pre- and post-power4 encodings. PR 28959 * ppc-dis.c (lookup_powerpc): Revert 2021-05-28 change. Instead only look at deprecated PPC_OPCODE_RAW bit when -Many. 2022-03-13 GDB Administrator Automatic date update in version.in 2022-03-12 Tom Tromey Relax regexp in gdb.rust/unsized.exp With nightly rustc, gdb.rust/unsized.exp fails: (gdb) ptype *us Structure has no component named operator*. rustc changed to emit a bit more debug info for unsized types. Because the original test is just to make sure that ptype of an unsized array looks right, this patch relaxes the regexp and changes the expression. I think this keeps the original test meaning, but also works with nightly. I also tested stable and 1.48. 2022-03-12 GDB Administrator Automatic date update in version.in 2022-03-11 Tom Tromey Avoid crash with cross-linux core file An internal test case creates a core file using gcore, then restarts gdb with that core. When run with a cross-linux gdb (in this case, x86-64 host with ppc64-linux target), the test fails: | (gdb) core core | [New LWP 18437] | warning: `/lib64/libc.so.6': Shared library architecture unknown is not compatible with target architecture powerpc:common64. | warning: Could not load shared library symbols for /lib64/ld64.so.1. | Do you need "set solib-search-path" or "set sysroot"? | ../../src/gdb/gdbarch.c:3388: internal-error: int gdbarch_elf_make_msymbol_special_p(gdbarch*): Assertion `gdbarch != NULL' failed. | A problem internal to GDB has been detected, | further debugging may prove unreliable. | Quit this debugging session? (y or n) y What's happening here is that the core file lists some shared libraries. These aren't available via the solib search path, and so gdb finds the local (x86-64) libraries. This is not ideal, but on the other hand, it is what was asked for -- while the test does set solib-search-path, it does not set the sysroot. But, because gdb isn't configured to handle these libraries, it crashes. It seems to me that it's better to avoid the crash by having solib_bfd_open fail in the case where a library is incompatible. That is what this patch does. Now it looks like: | [New LWP 15488] | Error while mapping shared library sections: | `/lib64/libc.so.6': Shared library architecture unknown is not compatible with target architecture powerpc:common64. ... and does not crash gdb. I don't have a good setup for testing this using dejagnu, so I don't know whether an existing gdb test covers this scenario. 2022-03-11 Andrew Burgess gdb/testsuite: remove duplicates from gdb.base/stap-probe.exp Remove the duplicate test names from gdb.base/stap-probe.exp, this is done by actually passing a unique test name in a couple of places (rather than using the command as the test name), and in another couple of places, a test has a duplicate name due to a cut & paste error, which I've fixed. There's no change in what is actually being tested after this commit. 2022-03-11 Vladimir Mezentsev gprofng: a new GNU profiler top-level * Makefile.def: Add gprofng module. * configure.ac: Add --enable-gprofng option. * src-release.sh: Add gprofng. * Makefile.in: Regenerate. * configure: Regenerate. * gprofng: New directory. binutils * MAINTAINERS: Add gprofng maintainer. * README-how-to-make-a-release: Add gprofng. include. * collectorAPI.h: New file. * libcollector.h: New file. * libfcollector.h: New file. 2022-03-11 GDB Administrator Automatic date update in version.in 2022-03-10 Aaron Merey gdb/auto-load: Remove repeating "auto-load" from debug message Remove "auto-load:" from a format string passed to auto_load_debug_printf. It is unnecessary since this function will prefix the string with "[auto-load]" when printing it. 2022-03-10 Tom Tromey Change how "print/x" displays floating-point value Currently, "print/x" will display a floating-point value by first casting it to an integer type. This yields weird results like: (gdb) print/x 1.5 $1 = 0x1 This has confused users multiple times -- see PR gdb/16242, where there are several dups. I've also seen some confusion from this internally at AdaCore. The manual says: 'x' Regard the bits of the value as an integer, and print the integer in hexadecimal. ... which seems more useful. So, perhaps what happened is that this was incorrectly implemented (or maybe correctly implemented and then regressed, as there don't seem to be any tests). This patch fixes the bug. There was a previous discussion where we agreed to preserve the old behavior: https://sourceware.org/legacy-ml/gdb-patches/2017-06/msg00314.html However, I think it makes more sense to follow the manual. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=16242 2022-03-10 Tom Tromey Simplify the ui-out progress API I noticed that 'progress' is a method on ui-out, but it seems to me that it would be better if the only API were via the progress_meter class. This patch makes this change, changing progress to be a method on the meter itself. 2022-03-10 Andrew Burgess gdb/gdbarch: fix typo in gdbarch-components.py Fixes a minor typo, in a comment, in the gdbarch-components.py script. There should be no user visible changes after this commit. 2022-03-10 Lancelot SIX Process exit status is leader exit status testcase This adds a multi-threaded testcase that has all threads in the process exit with a different exit code, and ensures that GDB reports the thread group leader's exit status as the whole-process exit status. Before this set of patches, this would randomly report the exit code of some other thread, and thus fail. Tested on Linux-x86_64, native and gdbserver. Co-Authored-By: Pedro Alves Change-Id: I30cba2ff4576fb01b5169cc72667f3268d919557 2022-03-10 Pedro Alves Re-add zombie leader on exit, gdbserver/linux Same as the previous patch, but for GDBserver. In summary, the current zombie leader detection code in linux-low.cc has a race -- if a multi-threaded inferior exits just before check_zombie_leaders finds that the leader is now zombie via checking /proc/PID/status, check_zombie_leaders deletes the leader, assuming we won't get an event for that exit (which we won't in some scenarios, but not in this one), which is a false-positive scenario, where the whole process is simply exiting. Later when we see the last LWP in our list exit, we report that LWP's exit status as exit code, even though for the (real) parent process, the exit code that counts is the child's leader thread's exit code. Like for GDB, the solution here is to: - only report whole-process exit events for the leader. - re-add the leader back to the LWP list when we finally see it exit. Change-Id: Id2d7bbb51a415534e1294fff1d555b7ecaa87f1d 2022-03-10 Pedro Alves Re-add zombie leader on exit, gdb/linux The current zombie leader detection code in linux-nat.c has a race -- if a multi-threaded inferior exits just before check_zombie_leaders finds that the leader is now zombie via checking /proc/PID/status, check_zombie_leaders deletes the leader, assuming we won't get an event for that exit (which we won't in some scenarios, but not in this one). That might seem mostly harmless, but it has some downsides: - later when we continue pulling events out of the kernel, we will collect the exit event of the non-leader threads, and once we see the last lwp in our list exit, we return _that_ lwp's exit code as whole-process exit code to infrun, instead of the leader's exit code. - this can cause a hang in stop_all_threads in infrun.c. Say there are 2 threads in the process. stop_all_threads stops each of those threads, and then waits for two stop or exit events, one for each thread. If the whole process exits, and check_zombie_leaders hits the false-positive case, linux-nat.c will only return one event to GDB (the whole-process exit returned when we see the last thread, the non-leader thread, exit), making stop_all_threads hang forever waiting for a second event that will never come. However, in this false-positive scenario, where the whole process is exiting, as opposed to just the leader (with pthread_exit(), for example), we _will_ get an exit event shortly for the leader, after we collect the exit event of all the other non-leader threads. Or put another way, we _always_ get an event for the leader after we see it become zombie. I tried a number of approaches to fix this: #1 - My first thought to address the race was to make GDB always report the whole-process exit status for the leader thread, not for whatever is the last lwp in the list. We _always_ get a final exit (or exec) event for the leader, and when the race triggers, we're not collecting it. #2 - My second thought was to try to plug the race in the first place. I thought of making GDB call waitpid/WNOHANG for all non-leader threads immediately when the zombie leader is detected, assuming there would be an exit event pending for each of them waiting to be collected. Turns out that that doesn't work -- you can see the leader become zombie _before_ the kernel kills all other threads. Waitpid in that small time window returns 0, indicating no-event. Thankfully we hit that race window all the time, which avoided trading one race for another. Looking at the non-leader thread's status in /proc doesn't help either, the threads are still in running state for a bit, for the same reason. #3 - My next attempt, which seemed promising, was to synchronously stop and wait for the stop for each of the non-leader threads. For the scenario in question, this will collect all the exit statuses of the non-leader threads. Then, if we are left with only the zombie leader in the lwp list, it means we either have a normal while-process exit or an exec, in which case we should not delete the leader. If _only_ the leader exited, like in gdb.threads/leader-exit.exp, then after pausing threads, we will still have at least one live non-leader thread in the list, and so we delete the leader lwp. I got this working and polished, and it was only after staring at the kernel code to convince myself that this would really work (and it would, for the scenario I considered), that I realized I had failed to account for one scenario -- if any non-leader thread is _already_ stopped when some thread triggers a group exit, like e.g., if you have some threads stopped and then resume just one thread with scheduler-locking or non-stop, and that thread exits the process. I also played with PTRACE_EVENT_EXIT, see if it would help in any way to plug the race, and I couldn't find a way that it would result in any practical difference compared to looking at /proc/PID/status, with respect to having a race. So I concluded that there's no way to plug the race, we just have to deal with it. Which means, going back to approach #1. That is the approach taken by this patch. Change-Id: I6309fd4727da8c67951f9cea557724b77e8ee979 2022-03-10 Pedro Alves gdbserver: Reindent check_zombie_leaders This fixes the indentation of linux_process_target::check_zombie_leaders, which will help with keeping its comments in sync with the gdb/linux-nat.c counterpart. Change-Id: I37332343bd80423d934249e3de2d04feefad1891 2022-03-10 Pedro Alves gdbserver: Reorganize linux_process_target::filter_event Reorganize linux-low.cc:linux_process_target::filter_event such that all the handling for events for LWPs not in the LWP list is together. This helps make a following patch clearer. The comments and debug messages have also been tweaked to have them synchronized with the GDB counterpart. Change-Id: If9019635f63a846607cfda44b454b4254a404019 2022-03-10 Pedro Alves gdb: Reorganize linux_nat_filter_event Reorganize linux-nat.c:linux_nat_filter_event such that all the handling for events for LWPs not in the LWP list is together. This helps make a following patch clearer. The comments and debug messages have also been tweaked - the end goal is to have them synchronized with the gdbserver counterpart. Change-Id: I8586d8dcd76d8bd3795145e3056fc660e3b2cd22 2022-03-10 Pedro Alves Fix gdb.threads/current-lwp-dead.exp race If we make GDB report the process EXIT event for the leader thread, as will be done in a latter patch of this series, then gdb.threads/current-lwp-dead.exp starts failing: (gdb) break fn_return Breakpoint 2 at 0x5555555551b5: file /home/pedro/rocm/gdb/build/gdb/testsuite/../../../src/gdb/testsuite/gdb.threads/current-lwp-dead.c, line 45. (gdb) continue Continuing. [New LWP 2138466] [Inferior 1 (process 2138459) exited normally] (gdb) FAIL: gdb.threads/current-lwp-dead.exp: continue to breakpoint: fn_return (the program exited) The inferior exit reported is actually correct. The main thread has indeed exited, and that's the thread that has the right exit code to report to the user, as that's the exit code that is reported to the program's parent. In this case, GDB managed to collect the exit code for the leader thread before reaping the other thread, because in reality, the testcase isn't creating standard threads, it is using raw clone, and the new clones are put in their own thread group. Fix it by making the main "thread" not exit until the scenario we're exercising plays out. Also, run the program to completion for completeness. The original program really wanted the leader thread to exit before the fn_return function was reached -- it was important that the current thread as pointed by inferior_ptid was gone when infrun got the breakpoint event. I've tweaked the testcase to ensure that that condition is still held, though it is no longer the main thread that exits. This required a bit of synchronization between the threads, which required using CLONE_VM unconditionally. The #ifdef guards were added as a fix for https://sourceware.org/bugzilla/show_bug.cgi?id=11214, though I don't think they were necessary because the program is not using TLS. If it turns out they were necessary, we can link the testcase with "-z now" instead, which was mentioned as an alternative workaround in that Bugzilla. Change-Id: I7be2f0da4c2fe8f80a60bdde5e6c623d8bd5a0aa 2022-03-10 Pedro Alves Fix gdb.threads/clone-new-thread-event.exp race If we make GDB report the process EXIT event for the leader thread, instead of whatever is the last thread in the LWP list, as will be done in a latter patch of this series, then gdb.threads/current-lwp-dead.exp starts failing: (gdb) FAIL: gdb.threads/clone-new-thread-event.exp: catch SIGUSR1 (the program exited) This is a testcase race -- the main thread does not wait for the spawned clone "thread" to finish before exiting, so the main program may exit before the second thread is scheduled and reports its SIGUSR1. With the change to make GDB report the EXIT for the leader, the race is 100% reproducible by adding a sleep(), like so: --- c/gdb/testsuite/gdb.threads/clone-new-thread-event.c +++ w/gdb/testsuite/gdb.threads/clone-new-thread-event.c @@ -51,6 +51,7 @@ local_gettid (void) static int fn (void *unused) { + sleep (1); tkill (local_gettid (), SIGUSR1); return 0; } Resulting in: Breakpoint 1, main (argc=1, argv=0x7fffffffd418) at gdb.threads/clone-new-thread-event.c:65 65 stack = malloc (STACK_SIZE); (gdb) continue Continuing. [New LWP 3715562] [Inferior 1 (process 3715555) exited normally] (gdb) FAIL: gdb.threads/clone-new-thread-event.exp: catch SIGUSR1 (the program exited) That inferior exit reported is actually correct. The main thread has indeed exited, and that's the thread that has the right exit code to report to the user, as that's the exit code that is reported to the program's parent. In this case, GDB managed to collect the exit code for the leader thread before reaping the other thread, because in reality, the testcase isn't creating standard threads, it is using raw clone, and the new clones are put in their own thread group. Fix it by making the main thread wait for the child to exit. Also, run the program to completion for completeness. Change-Id: I315cd3dc2b9e860395dcab9658341ea868d7a6bf 2022-03-10 Pedro Alves Fix gdbserver/linux target_waitstatus logging assert Turning on debug output in gdbserver leads to an assertion failure if gdbserver reports a non-signal event: [threads] wait_1: LWP 3273770: extended event with waitstatus status->kind = EXECD, execd_pathname = gdb.threads/non-ldr-exc-1/non-ldr-exc-1 [threads] wait_1: Hit a non-gdbserver trap event. ../../src/gdbserver/../gdb/target/waitstatus.h:365: A problem internal to GDBserver has been detected. sig: Assertion `m_kind == TARGET_WAITKIND_STOPPED || m_kind == TARGET_WAITKIND_SIGNALLED' failed. Fix it in the obvious way, using target_waitstatus::to_string(), resulting in, for example: [threads] wait_1: ret = LWP 1542412.1542412, status->kind = STOPPED, sig = GDB_SIGNAL_TRAP Change-Id: Ia4832f9b4fa39f4af67fcaf21fd4d909a285a645 2022-03-10 Nick Clifton Add option to objdump/readelf to disable access to debuginfod servers. * dwarf.c (use_debuginfod): New variable. Set to 1. (load_separate_debug_info): Only call debuginfod_fetch_separate_debug_info is use_debuginfod is true. (dwarf_select_sections_by_names): Add do-not-use-debuginfod and use-debuginfod options. (dwarf_select_sections_by_letters): Add D and E options. * dwarf.h (use_debuginfod): New extern. * objdump.c (usage): Mention the new options. * readelf.c (usage): Likewise. * doc/binutils.texi: Document the new options. * doc/debug-options.texi: Describe the new options. * NEWS: Mention the new feature. * testsuite/binutils-all/debuginfod.exp: Add tests of the new options. 2022-03-10 Alan Modra Re: ld: Add a before_plugin_all_symbols_read hook * testsuite/ld-plugin/pr28849.d: Adjust for powerpc64 function descriptors. 2022-03-10 H.J. Lu ld: Add a before_plugin_all_symbols_read hook Add a before_plugin_all_symbols_read hook to load symbol references from DT_NEEDED entries, included from --copy-dt-needed-entries, before reading plugin symbols to properly resolve plugin symbol references. bfd/ PR ld/28849 * elf-bfd.h (elf_link_hash_table): Add handling_dt_needed. * elflink.c (_bfd_elf_merge_symbol): Don't set non_ir_ref_dynamic before plugin 'all symbols read' hook is called. ld/ PR ld/28849 * ldelf.c (ldelf_handle_dt_needed): New function. (ldelf_before_plugin_all_symbols_read): Likewise. (ldelf_after_open): Call ldelf_handle_dt_needed. * ldelf.h (ldelf_before_plugin_all_symbols_read): New. * ldemul.c (ldemul_before_plugin_all_symbols_read): Likewise. * ldemul.h (ldemul_before_plugin_all_symbols_read): Likewise. (ld_emulation_xfer_struct): Add before_plugin_all_symbols_read. * ldlang.c (lang_process): Call ldemul_before_plugin_all_symbols_read before calling plugin_call_all_symbols_read. * emultempl/elf.em (gld${EMULATION_NAME}_before_plugin_all_symbols_read): New. (LDEMUL_BEFORE_PLUGIN_ALL_SYMBOLS_READ): New. * emultempl/emulation.em (ld_${EMULATION_NAME}_emulation): Initialize the before_plugin_all_symbols_read field. * testsuite/ld-plugin/lto.exp: Run PR ld/28849 tests. * testsuite/ld-plugin/pr28849.d: New file. * testsuite/ld-plugin/pr28849a.c: Likewise. * testsuite/ld-plugin/pr28849b.c: Likewise. 2022-03-10 GDB Administrator Automatic date update in version.in 2022-03-09 Hans-Peter Nilsson toplevel: Makefile.def: Make configure-sim depend on all-readline Without this, a "make all-sim" without the equivalent of libreadline-dev installed on the build system, won't properly pick up the in-tree readline build, and you'll see: mkdir -p -- ./sim Configuring in ./sim configure: creating cache ./config.cache checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking target system type... cris-axis-elf checking for x86_64-pc-linux-gnu-gcc... gcc checking whether the C compiler works... yes ... checking for library containing tgetent... -ltermcap checking for readline in -lreadline... no configure: error: the required "readline" library is missing make[1]: *** [Makefile:11188: configure-sim] Error 1 make[1]: Leaving directory '/home/hp/sim/b' The sim dependency on readline is apparently (nominally) valid as there's a readline call in sim/erc32/sis.c. 2022-02-21 Hans-Peter Nilsson * Makefile.def (dependencies): Make configure-sim depend on all-readline. 2022-03-09 Maciej W. Rozycki GDB/testsuite: Fix a "displayed" typo in gdb.base/default.exp Fix a typo, s/dislayed/displayed/ in default.exp at the top level. GDB/testsuite: Remove a stray backslash from gdb.base/settings.exp Remove a stray trailing backslash from `test-integer' in settings.exp. It is harmless as only white space follows in the next line before the closing brace, so it merely swallows the newline character, but it may look confusing to the reader. 2022-03-09 Christina Schimpe (tiny change) * gdb/doc/gdb.texinfo (Requirements): Fix a typo. 2022-03-09 Alan Modra Constant fold view increment expressions The idea here is to replace expressions like v + 1 + 1 + 1 with v + 3. * dwarf2dbg.c (set_or_check_view): Remove useless assertion. Resolve multiple view increments. * testsuite/gas/elf/dwarf2-18.d: Don't xfail mep. 2022-03-09 Alan Modra Reduce duplicated symbol_clone_if_forward_ref work * symbol.c (struct symbol_flags): Add forward_resolved. (symbol_entry_find): Update needle initialisation. (symbol_clone_if_forward_ref): Do no work when forward_resolved is already set. Set forward_resolved. 2022-03-09 Aaron Merey gdb: Try searching for auto-load script using .gnu_debuglink If an auto-load script cannot be found and objfile is a separate debuginfo whose filename does not match the name found in the parent file's .gnu_debuglink section, then repeat the search using the parent's filename where the last component is replaced with the .gnu_debuglink name. For example if the parent's filename is "/usr/lib/libxyz.so" and the name in its .gnu_debuglink section is "libxyz.so.debug", then if no auto-load script is otherwise found the search will be repeated with the filename "/usr/lib/libxyz.so.debug". This helps gdb locate auto-load scripts when debuginfo files do not have the expected filename, such as when they are aquired from debuginfod. 2022-03-09 GDB Administrator Automatic date update in version.in 2022-03-08 Aaron Merey PR gdb/27876 - debuginfod-downloaded source files don't pass proper fullname across mi / (gdb)info source Source files downloaded from debuginfod currently use their original DWARF filename as their "fullname". This causes a mismatch between the fullname and the actual location of the source file in the debuginfod client cache. MI consumers such as VSCode will fail to open debuginfod-downloaded source files due to this. Also 'info source' will fail to include the true paths of these files. To fix this, use the debuginfod cache path as the fullname for debuginfod- downloaded source files. 2022-03-08 Jan Vrany gdb/mi: preserve user selected thread and frame when invoking MI commands Fix for PR gdb/20684. When invoking MI commands with --thread and/or --frame, the user selected thread and frame was not preserved: (gdb) info thread &"info thread\n" ~" Id Target Id Frame \n" ~"* 1 Thread 0x7ffff7c30740 (LWP 19302) \"user-selected-c\" main () at /home/uuu/gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c:60\n" ~" 2 Thread 0x7ffff7c2f700 (LWP 19306) \"user-selected-c\" child_sub_function () at /home/uuu/gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c:30\n" ~" 3 Thread 0x7ffff742e700 (LWP 19307) \"user-selected-c\" child_sub_function () at /home/uuu/gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c:30\n" ^done (gdb) info frame &"info frame\n" ~"Stack level 0, frame at 0x7fffffffdf90:\n" ~" rip = 0x555555555207 in main (/home/uuu/gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c:60); saved rip = 0x7ffff7c5709b\n" ~" source language c.\n" ~" Arglist at 0x7fffffffdf80, args: \n" ~" Locals at 0x7fffffffdf80, Previous frame's sp is 0x7fffffffdf90\n" ~" Saved registers:\n " ~" rbp at 0x7fffffffdf80, rip at 0x7fffffffdf88\n" ^done (gdb) -stack-info-depth --thread 3 ^done,depth="4" (gdb) info thread &"info thread\n" ~" Id Target Id Frame \n" ~" 1 Thread 0x7ffff7c30740 (LWP 19302) \"user-selected-c\" main () at /home/uuu/gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c:60\n" ~" 2 Thread 0x7ffff7c2f700 (LWP 19306) \"user-selected-c\" child_sub_function () at /home/uuu/gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c:30\n" ~"* 3 Thread 0x7ffff742e700 (LWP 19307) \"user-selected-c\" child_sub_function () at /home/uuu/gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c:30\n" ^done (gdb) info frame &"info frame\n" ~"Stack level 0, frame at 0x7ffff742dee0:\n" ~" rip = 0x555555555169 in child_sub_function (/home/uuu/gdb/gdb/testsuite/gdb.mi/user-selected-context-sync.c:30); saved rip = 0x555555555188\n" ~" called by frame at 0x7ffff742df00\n" ~" source language c.\n" ~" Arglist at 0x7ffff742ded0, args: \n" ~" Locals at 0x7ffff742ded0, Previous frame's sp is 0x7ffff742dee0\n" ~" Saved registers:\n " ~" rbp at 0x7ffff742ded0, rip at 0x7ffff742ded8\n" ^done (gdb) This caused problems for frontends that provide access to CLI because UI may silently change the context for CLI commands (as demonstrated above). This commit fixes the problem by restoring thread and frame in mi_cmd_execute (). With this change, there are only two GDB/MI commands that can change user selected context: -thread-select and -stack-select-frame. This allows us to remove all and rather complicated logic of notifying about user selected context change from mi_execute_command (), leaving it to these two commands themselves to notify. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=20684 2022-03-08 Andrew Burgess gdb: announce upcoming removal of Python 2 support from gdb As has been discussed here: https://sourceware.org/pipermail/gdb-patches/2022-January/184910.html Python 2 support will be removed from GDB after GDB 12 has branched. This commit places an entry in the NEWS file to inform users of this decision. 2022-03-08 GDB Administrator Automatic date update in version.in 2022-03-07 Andrew Burgess gdb/testsuite: add new test for comparing char types in Python There's an interesting property of the 'char' type in C and C++, the three types 'char', 'unsigned char', and 'signed char', are all considered distinct. In contrast, and 'int' is signed by default, and so 'int' and 'signed int' are considered the same type. This commit adds a test to ensure that this edge case is visible to a user from Python. It is worth noting that for any particular compiler implementation (or the flags a compiler was invoked with), a 'char' will be either signed or unsigned; it has to be one or the other, and a user can access this information by using the Type.is_signed property. However, for something like function overload resolution, the 'char' type is considered distinct from the signed and unsigned variants. There's no change to GDB with this commit, this is just adding a new test to guard some existing functionality. 2022-03-07 Andrew Burgess gdb/python: add Type.is_signed property Add a new read-only property, Type.is_signed, which is True for signed types, and False otherwise. This property should only be read on types for which Type.is_scalar is true, attempting to read this property for non-scalar types will raise a ValueError. I chose 'is_signed' rather than 'is_unsigned' in order to match the existing Architecture.integer_type method, which takes a 'signed' parameter. As far as I could find, that was the only existing signed/unsigned selector in the Python API, so it seemed reasonable to stay consistent. 2022-03-07 Andrew Burgess gdb/python: add Type.is_scalar property Add a new read-only property which is True for scalar types, otherwise, it's False. 2022-03-07 Andrew Burgess gdb/mi: add --no-connection to MI -add-inferior command Following on from the previous commit, where the -add-inferior command now uses the same connection as the current inferior, this commit adds a --no-connection option to -add-inferior. This new option matches the existing option of the same name for the CLI version of add-inferior; the new inferior is created with no connection. I've added a new 'connection' field to the MI output of -add-inferior, which includes the connection number and short name. I haven't included the longer description field, this is the MI after all. My expectation would be that if the frontend wanted to display all the connection details then this would be looked up from 'info connection' (or the MI equivalent if/when such a command is added). The existing -add-inferior tests are updated, as are the docs. 2022-03-07 Umair Sair gdb/mi: fix regression in mi -add-inferior command Prior to the multi-target support commit: commit 5b6d1e4fa4fc6827c7b3f0e99ff120dfa14d65d2 Date: Fri Jan 10 20:06:08 2020 +0000 Multi-target support When a new inferior was added using the MI -add-inferior command, the new inferior would be using the same target as all the other inferiors. This makes sense, GDB only supported a single target stack at a time. After the above commit, each inferior has its own target stack. To maintain backward compatibility, for the CLI add-inferior command, when a new inferior is added the above commit has the new inferior inherit a copy of the target stack from the current inferior. Unfortunately, this same backward compatibility is missing for the MI. This commit fixes this oversight. Now, when the -add-inferior MI command is used, the new inferior will inherit a copy of the target stack from the current inferior. 2022-03-07 Tom Tromey Deprecate dbx mode GDB has a dbx emulation mode that adds a few aliases and helper commands. This mode is barely documented and is very superficial besides. I suspect it is rarely used, and I would like to propose deprecating it for GDB 12, and then removing it in GDB 13. 2022-03-07 Pedro Alves Remove unnecessary inferior lookup in infrun:handle_one infrun.c:handle_one calls find_inferior_ptid unnecessarily, since we already have a thread pointer handy, and the thread has a pointer to the inferior. This commit removes the unnecessary lookup. Change-Id: I2ae18601dd75346c6c91068e9a4f9a6484fb3339 2022-03-07 Tom Tromey Fix bug in ada_print_floating ada_print_floating rewrites a floating-point string representation to conform to Ada syntax. However, if you managed to get a floating point error, you might see: (gdb) print whatever $2 = What's happening here is that ada_print_floating doesn't recognize this error case, and proceeds to modify the error text. This patch fixes this problem. 2022-03-07 Tom Tromey Implement real literal extension for Ada Sometimes it is convenient to be able to specify the exact bits of a floating-point literal. For example, you may want to set a floating-point register to a denormalized value, or to a particular NaN. In C, you can do this by combining the "{}" cast with an array literal, like: (gdb) p {double}{0x576488BDD2AE9FFE} $1 = 9.8765449999999996e+112 This patch adds a somewhat similar idea to Ada. It extends the lexer to allow "l" and "f" suffixes in a based literal. The "f" indicates a floating-point literal, and the "l"s control the size of the floating-point type. Note that this differs from Ada's based real literals. I believe those can also be used to control the bits of a floating-point value, but they are a bit more cumbersome to use (simplest is binary but that's also very lengthy). Also, these aren't implemented in GDB. I chose not to allow this extension to work with based integer literals with exponents. That didn't seem very useful. 2022-03-07 Tom Tromey Fix Ada integer literals with exponents While working on another patch, I noticed that Ada integer literals with exponents did not work. For example, with one form you get an error: (gdb) print 8e2 Invalid digit `e' in based literal And with another form you get an incorrect value: (gdb) print 16#8#e2 $2 = 8 This patch fixes the bugs and adds tests. 2022-03-07 Tom Tromey Fix gdb.ada/arrayptr.exp results PR ada/28115 points out that gdb.ada/arrayptr.exp works with GNAT 12, but fails with minimal encodings in earlier versions. This patch updates the test to try to report the results correctly. I tried this with the Fedora 34 system gcc (GCC 11) and with a GCC 12 built from git trunk sometime relatively recently. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28115 2022-03-07 Tom Tromey Handle non-ASCII identifiers in Ada Ada allows non-ASCII identifiers, and GNAT supports several such encodings. This patch adds the corresponding support to gdb. GNAT encodes non-ASCII characters using special symbol names. For character sets like Latin-1, where all characters are a single byte, it uses a "U" followed by the hex for the character. So, for example, thorn would be encoded as "Ufe" (0xFE being lower case thorn). For wider characters, despite what the manual says (it claims Shift-JIS and EUC can be used), in practice recent versions only support Unicode. Here, characters in the base plane are represented using "Wxxxx" and characters outside the base plane using "WWxxxxxxxx". GNAT has some further quirks here. Ada is case-insensitive, and GNAT emits symbols that have been case-folded. For characters in ASCII, and for all characters in non-Unicode character sets, lower case is used. For Unicode, however, characters that fit in a single byte are converted to lower case, but all others are converted to upper case. Furthermore, there is a bug in GNAT where two symbols that differ only in the case of "Y WITH DIAERESIS" (and potentially others, I did not check exhaustively) can be used in one program. I chose to omit handling this case from gdb, on the theory that it is hard to figure out the logic, and anyway if the bug is ever fixed, we'll regret having a heuristic. This patch introduces a new "ada source-charset" setting. It defaults to Latin-1, as that is GNAT's default. This setting controls how "U" characters are decoded -- W/WW are always handled as UTF-32. The ada_tag_name_from_tsd change is needed because this function will read memory from the inferior and interpret it -- and this caused an encoding failure on PPC when running a test that tries to read uninitialized memory. This patch implements its own UTF-32-based case folder. This avoids host platform quirks, and is relatively simple. A short Python program to generate the case-folding table is included. It simply relies on whatever version of Unicode is used by the host Python, which seems basically acceptable. Test cases for UTF-8, Latin-1, and Latin-3 are included. This exercises most of the new code paths, aside from Y WITH DIAERESIS as noted above. 2022-03-07 Tom Tromey Define HOST_UTF32 in charset.h rust-parse.c has a #define for the host-specific UTF-32 charset name. A later patch needs the same thing, so this patch moves the definition to charset.h for easier reuse. 2022-03-07 Tom Tromey Let phex and phex_nz handle sizeof_l==1 Currently, neither phex nor phex_nz handle sizeof_l==1 -- they let this case fall through to the default case. However, a subsequent patch in this series needs this case to work correctly. I looked at all calls to these functions that pass a 1 for the sizeof_l parameter. The only such case seems to be correct with this change. 2022-03-07 Tom Tromey Don't pre-size result string in ada_decode Currently, ada_decode pre-sizes the output string, filling it with 'X' characters. However, it's a bit simpler and more flexible to let std::string do the work here, and simply append characters to the string as we go. This turns out to be useful for a subsequent patch. Simplify a regular expression in ada-lex.l ada-lex.l uses "%option case-insensitive", so there is no need for regular expressions to match upper case. 2022-03-07 GDB Administrator Automatic date update in version.in 2022-03-06 Maciej W. Rozycki MIPS/opcodes: Fix alias annotation for branch instructions Correct issues with INSN2_ALIAS annotation for branch instructions: - regular MIPS BEQZ/L and BNEZ/L assembly instructions are idioms for BEQ/L and BNE/L respectively with the `rs' operand equal to $0, - microMIPS 32-bit BEQZ and BNEZ assembly instructions are idioms for BEQ and BNE respectively with the `rt' operand equal to $0, - regular MIPS BAL assembly instruction is an idiom for architecture levels of up to the MIPSr5 ISA and a machine instruction on its own from the MIPSr6 ISA up. Add missing annotation to BEQZ/L and BNEZ/L accordingly then and add a new entry for BAL for the MIPSr6 ISA, correcting a disassembly bug: $ mips-linux-gnu-objdump -m mips:isa64r6 -M no-aliases -d bal.o bal.o: file format elf32-tradlittlemips Disassembly of section .text: 00000000 : 0: 04110000 0x4110000 ... $ Add test cases accordingly. Parts for regular MIPS BEQZ/L and BNEZ/L instructions from Sagar Patel. 2022-03-06 Maciej W. Rozycki binutils/ * testsuite/binutils-all/mips/mips1-branch-alias.d: New test. * testsuite/binutils-all/mips/mips1-branch-noalias.d: New test. * testsuite/binutils-all/mips/mips2-branch-alias.d: New test. * testsuite/binutils-all/mips/mips2-branch-noalias.d: New test. * testsuite/binutils-all/mips/mips32r6-branch-alias.d: New test. * testsuite/binutils-all/mips/mips32r6-branch-noalias.d: New test. * testsuite/binutils-all/mips/micromips-branch-alias.d: New test. * testsuite/binutils-all/mips/micromips-branch-noalias.d: New test. * testsuite/binutils-all/mips/mips-branch-alias.s: New test source. * testsuite/binutils-all/mips/micromips-branch-alias.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests. 2022-03-06 Sagar Patel Maciej W. Rozycki opcodes/ * mips-opc.c (mips_builtin_opcodes): Fix INSN2_ALIAS annotation for "bal", "beqz", "beqzl", "bnez" and "bnezl" instructions. * micromips-opc.c (micromips_opcodes): Likewise for "beqz" and "bnez" instructions. 2022-03-06 Tom Tromey Use function view when iterating over block symbols This changes iterate_over_block_local_vars and iterate_over_block_arg_vars to take a gdb::function_view rather than a function pointer and a user-data. In one spot, this allows us to remove a helper structure and helper function. In another spot, this looked more complicated, so I changed the helper function to be an "operator()" -- also a simplification, just not as big. 2022-03-06 Tom Tromey Simplify hppa-tdep.c use of objfile_key I happened to notice a couple of unnecessary casts in hppa-tdep.c, and then I saw that the use of objfile_key could be simplified -- removing some code and using the default deleter rather than noop_deleter. Tested by rebuilding. Let me know what you think. 2022-03-06 Simon Marchi gdb: constify parameter of value_copy In a following patch, I have a const value I want to copy using a value_copy. However, value_copy takes a non-const source value, at the moment. Change the paramter to be const, If the source value is not lazy, we currently call value_contents_all_raw, which calls allocate_value_contents, to get a view on the contents. They both take a non-const value, that's a problem. My first attempt at solving it was to add a const version of value_contents_all_raw, make allocate_value_contents take a const value, and either: - make value::contents mutable - make allocate_value_contents cast away the const The idea being that allocating the value contents buffer does modify the value at the bit level, but logically that doesn't change its state. That was getting a bit complicated, so what I ended up doing is make value_copy not call value_contents_all_raw. We know at this point that the value is not lazy, so value::contents must have been allocate already. Change-Id: I3741ab362bce14315f712ec24064ccc17e3578d4 2022-03-06 Simon Marchi gdb: remove internalvar_funcs::destroy No kind of internal var uses it remove it. This makes the transition to using a variant easier, since we don't need to think about where this should be called (in a destructor or not), if it can throw, etc. Change-Id: Iebbc867d1ce6716480450d9790410d6684cbe4dd 2022-03-06 GDB Administrator Automatic date update in version.in 2022-03-05 GDB Administrator Automatic date update in version.in 2022-03-04 Tom Tromey Mark vDSO as not a file The vDSO objfile is not a real file, so mark it as such. I noticed this because, when playing with debuginfod, I saw: Downloading 0.01 MB separate debug info for /tmp/system-supplied DSO at 0x7ffff7fc9000 That "/tmp" is wrong -- it's just gdb's cwd. This patch corrects the problem, resulting in: Downloading 0.01 MB separate debug info for system-supplied DSO at 0x7ffff7fc9000 Regression tested on x86-64 Fedora 34. 2022-03-04 Simon Marchi binutils/readelf: fix indentation in process_dynamic_section Clangd shows a warning about misleading indentation in this file, fix it. binutils/ChangeLog: * readelf.c (process_dynamic_section): Fix indentation. Change-Id: I43a7f4f4c75dd080af614222b980526f5debf297 2022-03-04 Christina Schimpe gdb: Use a typedef's scoped type name to identify local typedefs GDB prints the wrong type for typedefs in case there is another typedef available for the same raw type (gdb/16040). The reason is that the current hashmap based substitution mechanism always compares the target type of a typedef and not its scoped name. The original output of GDB for a program like ~~~~ namespace ns { typedef double scoped_double; } typedef double global_double; class TypedefHolder { public: double a; ns::scoped_double b; global_double c; private: typedef double class_double; class_double d; double method1(ns::scoped_double) { return 24.0; } double method2(global_double) { return 24.0; } }; int main() { TypedefHolder th; return 0; } ~~~~ is ~~~~ (gdb) b 27 Breakpoint 1 at 0x1131: file TypedefHolder.cc, line 27. (gdb) r Starting program: /tmp/typedefholder Breakpoint 1, main () at TypedefHolder.cc:27 27 return 0; (gdb) ptype th type = class TypedefHolder { public: class_double a; class_double b; class_double c; private: class_double d; class_double method1(class_double); class_double method2(class_double); typedef double class_double; } ~~~~ Basically all attributes of a class which have the raw type "double" are substituted by "class_double". With the patch the output is the following ~~~~ type = class TypedefHolder { public: double a; ns::scoped_double b; global_double c; private: class_double d; double method1(ns::scoped_double); double method2(global_double); typedef double class_double; } ~~~~ 2022-03-04 Jan Beulich RISC-V: make .insn actually work for 64-bit insns Presently in this case, due to an undefined behavior shift, at least with x86 cross builds I'm observing: Error: value conflicts with instruction length `8,0x0000003f' Eliminate the UB and extend the respective testcase. 2022-03-04 Jan Beulich x86: drop redundant x86-64-code16-2 test The code16-2 test is already meaningless enough as a gas test, identical to this one, and is run uniformly for all ELF targets anyway. 2022-03-04 GDB Administrator Automatic date update in version.in 2022-03-03 Roland McGrath Fix typo in last change. 2022-03-03 Roland McGrath Avoid conflict with gnulib open/close macros. On some systems, the gnulib configuration will decide to define open and/or close as macros to replace the POSIX C functions. This interferes with using those names in C++ class or namespace scopes. gdbsupport/ * event-pipe.cc (event_pipe::open): Renamed to ... (event_pipe::open_pipe): ... this. (event_pipe::close): Renamed to ... (event_pipe::close_pipe): ... this. * event-pipe.h (class event_pipe): Updated. gdb/ * inf-ptrace.h (async_file_open, async_file_close): Updated. gdbserver/ * gdbserver/linux-low.cc (linux_process_target::async): Likewise. 2022-03-03 Alan Modra Adjust ld ctf test for 32-bit targets powerpc-linux, and I suspect other 32-bit targets, report "aligned at 0x4" for this test. * testsuite/ld-ctf/nonrepresentable.d: Accept any alignment. 2022-03-03 Luis Machado Update my e-mail address in the MAINTAINERS file Update the information accordingly. 2022-03-03 Tiezhu Yang gdb: testsuite: fix failed testcases in gdb.base/gdb-caching-proc.exp When execute the following command: make check-gdb TESTS="gdb.base/gdb-caching-proc.exp" we can see there exist some failed testcases: FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 0: can spawn for attach (got interactive prompt) FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 1: can spawn for attach (got interactive prompt) FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 2: can spawn for attach (got interactive prompt) FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 3: can spawn for attach (got interactive prompt) FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 4: can spawn for attach (got interactive prompt) FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 5: can spawn for attach (got interactive prompt) FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 6: can spawn for attach (got interactive prompt) FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 7: can spawn for attach (got interactive prompt) FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 8: can spawn for attach (got interactive prompt) FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 9: can spawn for attach (got interactive prompt) here are the detailed messages in gdb/testsuite/gdb.log: attach 873776 A program is being debugged already. Kill it? (y or n) n Not killed. (gdb) FAIL: gdb.base/gdb-caching-proc.exp: can_spawn_for_attach: 0: can spawn for attach (got interactive prompt) so handle the case "A program is being debugged already. Kill it" in can_spawn_for_attach to fix the failed testcases. 2022-03-03 Alan Modra comment typo fix 2022-03-03 Alan Modra PowerPC64 DT_RELR relative reloc addresses Section addresses can change between ppc64_elf_size_stubs and ppc64_elf_build_stubs due to .eh_frame editing. The idea of stashing r_offset final addresses calculated in ppc64_elf_size_stubs for use by ppc64_elf_build_stubs was never a good idea. Instead, we need to keep section/offset pairs. * elf64-ppc.c (struct ppc_link_hash_table): Delete relr_addr. Add relr section/offset array. (append_relr_off): Rewrite. Update all callers. (sort_relr): New function. (ppc64_elf_size_stubs): Adjust to suit new relative reloc stash. (ppc64_elf_build_stubs): Likewise. 2022-03-03 GDB Administrator Automatic date update in version.in 2022-03-02 John Baldwin configure: Stop checking for PT_GETXMMREGS. This request is present on all modern *BSD/i386 systems (those released since mid-2006), and the *BSD/i386 targets now assume it is present unconditionally. i386-bsd-nat: Assume PT_GETXMMREGS is present. NetBSD has included PT_GETXMMREGS since 1.6 released in September 2002. OpenBSD has included PT_GETXMMREGS since 3.8 released in November 2005. i386-fbsd-nat: Assume PT_GETXMMREGS is present. PT_GETXMMREGS was first added in FreeBSD 6.0 released in November 2005. The last FreeBSD release without support was 5.5 released in May 2006. 2022-03-02 John Baldwin fbsd-tdep: Implement the vsyscall_range gdbarch hook. FreeBSD recently added a real vDSO in its shared page for the amd64 architecture. The vDSO is mapped at the address given by the AT_KPRELOAD ELF auxiliary vector entry. To find the end of the mapping range, parse the list of virtual map entries used by 'info proc mappings' either from the NT_PROCSTAT_VMMAP core dump note, or via the kinfo_getvmmap function for native targets (fetched from the native target as the TARGET_OBJECT_FREEBSD_VMMAP object). This silences warnings on recent FreeBSD/amd64 kernels due to not finding symbols for the vdso: warning: Could not load shared library symbols for [vdso]. Do you need "set solib-search-path" or "set sysroot"? 2022-03-02 Tom Tromey Rewrite make-target-delegates in Python I think gdb is probably better off having fewer languages involved when generating code. 'sh' is unavoidable for build-time generation, but for other things, let's use Python. This rewrites make-target-delegates in Python. I've stuck pretty closely to the original code in this rewrite, so it may look slightly weird from a Python perspective. The only output difference is that a copyright header is now generated, using the code introduced in the previous patch. make-target-delegates.py is simpler to invoke, as it knows the correct input file to scan and it creates the output file itself. 2022-03-02 Tom Tromey Move copyright code from gdbarch.py to new file This moves the copyright code from gdbarch.py to a new Python source file, gdbcopyright.py. The function in this file will find the copyright dates by scanning the calling script. This will be reused in a future patch. This involved minor changes to the output of gdbarch.py. Also, I've updated copyright.py to remove the reference to gdbarch.sh. We don't need to mention gdbarch.py there, either. 2022-03-02 GDB Administrator Automatic date update in version.in 2022-03-01 Tom Tromey Some "distclean" fixes in gdb PR build/12440 points out that "make distclean" is broken in gdb. Most of the breakage comes from other projects in the tree, but we can fix some of the issues, which is what this patch does. Note that the yacc output files, like c-exp.c, are left alone. In a source distribution, these are included in the tarball, and if the user builds in-tree, we would not want to remove them. While that seems a bit obscure, it seems to me that "distclean" is only really useful for in-tree builds anyway -- out-of-tree I simply delete the entire build directory and start over. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=12440 2022-03-01 Tom Tromey Fix typo in the "alias" example PR cli/17332, filed around 8 years ago, points out a typo in the docs -- in one example, the command and its output are obviously out of sync. This patch fixes it. I'm checking this in as obvious. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17332 2022-03-01 Nick Clifton Fix a typo in the previous delta to bfdio.c. PR 25713 * bfdio.c (_bfd_real_fopen): Fix typo. 2022-03-01 Alan Modra Revert "Check thin archive element file size against archive header" This reverts commit 48e3e6aec8a4f37d00ea6c0da3ab45e76490e3db. PR 28929 * archive.c (_bfd_get_elt_at_filepos): Don't check thin archive element file size. 2022-03-01 Nick Clifton Fix linker tests to compile with gcc-12. PR 21964 * testsuite/ld-elf/pr21964-1a.c: Fix array comparisons. * testsuite/ld-elf/pr21964-1b.c: Likewise. * testsuite/ld-elf/pr21964-1c.c: Likewise. * testsuite/ld-elf/pr21964-2a.c: Likewise. * testsuite/ld-elf/pr21964-2b.c: Likewise. * testsuite/ld-elf/pr21964-3a.c: Likewise. Prevent an assertion from being triggered when linking an ARM object file with incorrectly set build attributes. PR 28848 PR 28859 * elf32-arm.c (elf32_arm_merge_eabi_attributes): If the first input bfd has a Tag_ABI_HardFP_use set to 3 but does not also have TAG_FP_arch set then reset the TAG_ABI_HardFP_use. 2022-03-01 Tiezhu Yang gdb: testsuite: fix wrong expected result in attach-pie-noexec.exp If /proc/sys/kernel/yama/ptrace_scope is 1, when execute the test case gdb.base/attach-pie-noexec.exp without superuser, the gdb.log shows the following info: (gdb) attach 6500 Attaching to process 6500 ptrace: Operation not permitted. (gdb) PASS: gdb.base/attach-pie-noexec.exp: attach It is obviously wrong, the expected result should be UNSUPPORTED in such a case. It is better to make can_spawn_for_attach to return false for this case. It would have to setup a small test program, compile it to exec, spawn it and try to attach to it. With this patch, we can see "Operation not permitted" in the log info, and then we can do the following processes to test: (1) set ptrace_scope as 0 $ echo 0 | sudo tee /proc/sys/kernel/yama/ptrace_scope $ make check-gdb TESTS="gdb.base/attach-pie-noexec.exp" (2) use sudo $ sudo make check-gdb TESTS="gdb.base/attach-pie-noexec.exp" Additionally, handle the other cases when test with RUNTESTFLAGS= "--target_board=native-extended-gdbserver". 2022-03-01 Tiezhu Yang gdb: testsuite: print explicit test result in can_spawn_for_attach In the current code, there is no test result when execute the following commands: $ make check-gdb TESTS="gdb.base/attach-pie-noexec.exp" RUNTESTFLAGS="--target_board=remote-gdbserver-on-localhost" $ make check-gdb TESTS="gdb.base/attach-pie-noexec.exp" RUNTESTFLAGS="--target_board=native-gdbserver" It is better to print explicit test result in can_spawn_for_attach. 2022-03-01 Tiezhu Yang gdb: add Tiezhu Yang as LoongArch maintainer The patch series "gdb: Add basic support for LoongArch" has been merged into master, list Tiezhu Yang as LoongArch maintainer. 2022-03-01 GDB Administrator Automatic date update in version.in 2022-02-28 Keith Seitz Fix "spawn id XYZ not open" errors in gdb.mi/mi-exec-run.exp Running mi-exec-run.exp on native-extended-gdbserver/-m{32,64} causes several Tcl errors to appear. For example, (gdb) ERROR: : spawn id exp20 not open while executing "expect { -i exp11 -timeout 10 -i "$inferior_spawn_id" -re ".*Cannot exec.*Permission denied" { set saw_perm_error 1 verbose -log "saw..." ("uplevel" body line 1) invoked from within "uplevel $body" NONE : spawn id exp20 not open UNRESOLVED: gdb.mi/mi-exec-run.exp: inferior-tty=separate: mi=separate: force-fail=1: run failure detected (eof) This is happening because of the way this test is implemented: while {1} { gdb_expect { -i "$inferior_spawn_id" -re ".*Cannot exec.*Permission denied" { set saw_perm_error 1 verbose -log "saw mi error" } -i "$gdb_spawn_id" -re "\\^error,msg=\"During startup program exited with code 127" { set saw_mi_error 1 verbose -log "saw mi error" } # and so on } } The first time this loop is executed, `inferior_spawn_id' is valid. When the first branch of the expect statement is reached, gdbserver has exited, closing the spawn_id. Since we haven't seen the gdb-side error yet, the loop is executed again. The first branch now refers to a non-existent spawn_id, leading to the error. This can be fixed by using exp_continue to loop in expect instead of looping around expect, which is the approach I have used[1]. Note I've had to update the expected message for the "During startup..." error message when running with gdbserver. One other small change I've made is to add a log entry which spills the values of the two variables, saw_mi_error and saw_perm_error (and updated the log output for the later). This should make the log output clearer about why the test failed. With this patch installed, all the ERRORs disappear, leaving previously masked FAILs (which I have not attempted to fix). [1] Anyone know why this test doesn't simply use gdb_test_multiple? I can only assume that it was intentionally written this way, and I've modified the code with that assumption. I have tested a version using gdb_test_multiple, and that appears to work fine, too, if that is preferred. [It still employs exp_continue to fix the spawn_id errors.] 2022-02-28 Tom Tromey Add more filename styling I found a few spots where filename styling ought to be applied, but is not. 2022-02-28 Tom Tromey Fix maybe-uninitialized warning in py-infthread.c I got this warning from py-infthread.c using the Fedora 34 system GCC: ../../binutils-gdb/gdb/python/py-infthread.c:102:30: warning: ‘extra_info’ may be used uninitialized in this function [-Wmaybe-uninitialized] I think this happens because GDB_PY_HANDLE_EXCEPTION expands to an 'if' whose condition is always true -- but GCC can't know this. This patch avoids the warning by adding a harmless initialization. 2022-02-28 Tom Tromey Handle multi-byte bracket sequences in Ada lexer As noted in an earlier patch, the Ada lexer does not handle multi-byte bracket sequences. This patch adds support for these for character literals. gdb does not generally seem to handle the Ada wide string types, so for the time being these continue to be excluded -- but an explicit error is added to make this more clear. 2022-02-28 Tom Tromey Handle 'QWW' encoding case in Ada enums In Ada, an enum can contain character literals. GNAT encodes these values in a special way. For example, the Unicode character U+0178 would be represented as 'QW0178' in the DWARF: <3><112f>: Abbrev Number: 2 (DW_TAG_enumerator) <1130> DW_AT_name : (indirect string, offset: 0x19ff): QW0178 <1134> DW_AT_const_value : 2 gdb handles this reasonably well, but failed to handle the 'QWW' encoding, which is used for characters outside the base plane. Also, while working on this, I noticed that gdb will print the decimal value for an enum character constant: (gdb) print Char_X $2 = 1 'x' This is a nice feature, IMO, because in this situation the 'x' enum constant does not have its usual decimal value -- it has the value that's assigned based on the enumeration type. However, gdb did not do this when it decided to print the constant using the bracket notation: (gdb) print Char_Thorn $3 = ["de"] This patch changes gdb to print the decimal value here as well, and to put the bracket notation in single quotes -- otherwise gdb will be printing something that it can't then read. Now it looks like: (gdb) print Char_Thorn $3 = 4 '["de"]' Note that gdb can't read longer bracket notations, like the other ones printed in this test case: (gdb) print Char_King $4 = 3 '["01fa00"]' While I think this is a bug, I plan to fix it separately. Finally, in the new test case, the copyright dates are chosen this way because this all started as a copy of an existing test. 2022-02-28 Andrew Burgess gdb/python: Add gdb.InferiorThread.details attribute This adds a new read-only attribute gdb.InferiorThread.details, this attribute contains a string, the results of target_extra_thread_info for the thread, or None, if target_extra_thread_info returns nullptr. As the string returned by target_extra_thread_info is unstructured, this attribute is only really useful for echoing straight through to the user, but, if a user wants to write a command that displays the same, or a similar 'Thread Id' to the one seen in 'info threads', then they need access to this string. Given that the string produced by target_extra_thread_info varies by target, there's only minimal testing of this attribute, I check that the attribute can be accessed, and that the return value is either None, or a string. 2022-02-28 Keith Seitz Error when gdb_is_target_1 is called without running gdb instance This is a snafu that I encountered while implementing the previous patch, which attempted to use gdb_is_target_native. This proc and gdb_is_target_remote both rely on gdb_is_target_1, which actually cannot be called without gdb already running. This patch adds appropriate warning comments to these procs and causes gdb_is_target_1 to issue a Tcl error if it is called without a gdb instance already running. This should prevent unwitting callers from using this at the wrong time. 2022-02-28 Keith Seitz Fix gdb.fortran "failed to extract expected results" errors When running the gdb.fortran tests array-slices.exp and lbound-ubound.exp, the test suite throws several ERRORs on native-gdbserver/-m{32,64}, and native-extended-gdbsever/-m{32,64}: [on native-extended-gdbserver/-m64] Running /home/keiths/work/gdb/branches/testsuite-errors/linux/gdb/testsuite/../../../src/gdb/testsuite/gdb.fortran/array-slices.exp ... ERROR: failed to extract expected results ERROR: failed to extract expected results Running /home/keiths/work/gdb/branches/testsuite-errors/linux/gdb/testsuite/../../../src/gdb/testsuite/gdb.fortran/lbound-ubound.exp ... ERROR: failed to extract expected results for lbound This occurs because the tests require inferior I/O which we do not have access to while using these targets. This patch skips these tests when running on non-native targets. 2022-02-28 Torbj?rn Svensson Further correct the handling of long pathnames on Windows hosts. PR 25713 * bfdio.c (_bfd_real_fopen): Fix handling of parhs longer than 260 characters on Windows hosts. 2022-02-28 Nick Clifton Clarify the wording of the error message when an obsolete configuration is encountered. PR 28886 * config.bfd: Update error message for obsolete configurations. 2022-02-28 GDB Administrator Automatic date update in version.in 2022-02-27 GDB Administrator Automatic date update in version.in 2022-02-26 Kevin Buettner Handle recursive internal problem in gdb_internal_error_resync I came across this problem when testing gdb.base/gdb-sigterm.exp on a machine with a pre-release version of glib-2.34 installed: A problem internal to GDB has been detected, further debugging may prove unreliable. Quit this debugging session? (y or n) Recursive internal problem. FAIL: gdb.base/gdb-sigterm.exp: expect eof #0 (GDB internal error) Resyncing due to internal error. ERROR: : spawn id exp11 not open while executing "expect { -i exp11 -timeout 10 -re "Quit this debugging session\\? \\(y or n\\) $" { send_gdb "n\n" answer incr count } -re "Create..." ("uplevel" body line 1) invoked from within "uplevel $body" NONE : spawn id exp11 not open ERROR: Could not resync from internal error (timeout) gdb.base/gdb-sigterm.exp: expect eof #0: stepped 9 times UNRESOLVED: gdb.base/gdb-sigterm.exp: 50 SIGTERM passes I don't have a problem with the latter ERROR nor the UNRESOLVED messages. However the first ERROR regarding the exp11 spawn id not being open is not especially useful. This commit handles the "Recursive internal problem" case, avoiding the problematic ERROR shown above. With this commit in place, the log messages look like this instead: A problem internal to GDB has been detected, further debugging may prove unreliable. Quit this debugging session? (y or n) Recursive internal problem. FAIL: gdb.base/gdb-sigterm.exp: expect eof #15 (GDB internal error) Resyncing due to internal error. ERROR: Could not resync from internal error (recursive internal problem) gdb.base/gdb-sigterm.exp: expect eof #15: stepped 12 times UNRESOLVED: gdb.base/gdb-sigterm.exp: 50 SIGTERM passes gdb/testsuite/ChangeLog: * lib/gdb.exp (gdb_internal_error_resync): Handle "Recursive internal problem". 2022-02-26 GDB Administrator Automatic date update in version.in 2022-02-25 Aaron Merey gdb-add-index: disable debuginfod gdb-add-index may trigger debuginfod's first-use notice. The notice is misleading in this case. It instructs the user to modify .gdbinit in order to permanently enable/disable debuginfod but gdb-add-index invokes gdb with -nx which ignores .gdbinit. Additionally debuginfod is not needed for gdb-add-index since the symbol file is given as an argument and should already be present locally. Fix this by disabling debuginfod when gdb-add-index invokes gdb. 2022-02-25 Andrew Burgess gdb: add operator+= and operator+ overload for std::string This commit adds operator+= and operator+ overloads for adding gdb::unique_xmalloc_ptr to a std::string. I could only find 3 places in GDB where this was useful right now, and these all make use of operator+=. I've also added a self test for gdb::unique_xmalloc_ptr, which makes use of both operator+= and operator+, so they are both getting used/tested. There should be no user visible changes after this commit, except when running 'maint selftest', where the new self test is visible. 2022-02-25 Tom Tromey Print MI prompt on interrupted command Joel noticed that if the remote dies unexpectedly during a command -- you can simulate this by using "continue" and then killing gdbserver -- then the CLI will print a new prompt, but MI will not. Later, we found out that this was also filed in bugzilla as PR mi/23820. The output looks something like this: | (gdb) | cont | &"cont\n" | ~"Continuing.\n" | ^running | *running,thread-id="all" | (gdb) | [... some output from GDB during program startup...] | =thread-exited,id="1",group-id="i1" | =thread-group-exited,id="i1" | &"Remote connection closed\n" Now, what about that "(gdb)" in the middle? That prompt comes from this questionable code in mi-interp.c:mi_on_resume_1: /* This is what gdb used to do historically -- printing prompt even if it cannot actually accept any input. This will be surely removed for MI3, and may be removed even earlier. */ if (current_ui->prompt_state == PROMPT_BLOCKED) fputs_unfiltered ("(gdb) \n", mi->raw_stdout); ... which seems like something to remove. But maybe the intent here is that this prompt is sufficient, and MI clients must be ready to handle output coming after a prompt. On the other hand, if this code *is* removed, then nothing would print a prompt in this scenario. Anyway, the CLI and the TUI handle emitting the prompt here by hooking into gdb::observers::command_error, but MI doesn't install an observer here. This patch adds the missing observer and arranges to show the MI prompt. Regression tested on x86-64 Fedora 34. It seems like this area could be improved a bit, by having start_event_loop call the prompt-displaying code directly, rather than indirecting through an observer. However, I haven't done this. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=23820 2022-02-25 Andrew Burgess Tom Tromey gdb/testsuite: fix list.exp test cases PR testsuite/7142 -- old enough to have been converted from Gnats -- points out that test_list_filename_and_function in gdb.base/list.exp has "fails" that are unmatched with passes. This patch cleans this up a little. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7142 2022-02-25 Tsukasa OI RISC-V: Remove a loop in the ISA parser Since commit e601909a3287bf541c6a7d82214bb387d2c76d82 ("RISC-V: Support to parse the multi-letter prefix in the architecture string.") changed so that all prefixed extensions are parsed in single riscv_parse_prefixed_ext call, a "while" loop on riscv_parse_subset is no longer required. bfd/ChangeLog: * elfxx-riscv.c (riscv_parse_subset): Remove unnecessary loop. 2022-02-25 Tsukasa OI RISC-V: Fix mask for some fcvt instructions This commit fixes incorrect uses of mask values in 'fcvt' instruction family. opcodes/ChangeLog: * riscv-opc.c (riscv_opcodes): Fix incorrect uses of mask values in 'fcvt' instruction family. 2022-02-25 Keith Seitz Support template lookups in strncmp_iw_with_mode This patch adds support for wild template parameter list matches, similar to how ABI tags or function overloads are now handled. With this patch, users will be able to "gloss over" the details of matching template parameter lists. This is accomplished by adding (yet more) logic to strncmp_iw_with_mode to skip parameter lists if none is explicitly given by the user. Here's a simple example using gdb.linespec/cpls-ops.exp: Before ------ (gdb) ptype test_op_call type = struct test_op_call { public: void operator()(void); void operator()(int); void operator()(long); void operator()(int *); } (gdb) b test_op_call::operator() Breakpoint 1 at 0x400583: test_op_call::operator(). (3 locations) (gdb) i b Num Type Disp Enb Address What 1 breakpoint keep y 1.1 y 0x400583 in test_op_call::operator()(int) at cpls-ops.cc:43 1.2 y 0x40058e in test_op_call::operator()() at cpls-ops.cc:47 1.3 y 0x40059e in test_op_call::operator()(long) at cpls-ops.cc:51 The breakpoint at test_op_call::operator() was never set. After ----- (gdb) b test_op_call::operator() Breakpoint 1 at 0x400583: test_op_call::operator(). (4 locations) (gdb) i b Num Type Disp Enb Address What 1 breakpoint keep y 1.1 y 0x400583 in test_op_call::operator()(int) at cpls-ops.cc:43 1.2 y 0x40058e in test_op_call::operator()() at cpls-ops.cc:47 1.3 y 0x40059e in test_op_call::operator()(long) at cpls-ops.cc:51 1.4 y 0x4008d0 in test_op_call::operator()(int*) at cpls-ops.cc:57 Similar to how scope lookups work, passing "-qualified" to the break command will cause a literal lookup of the symbol. In the example immediately above, this will cause GDB to only find the three non-template functions. 2022-02-25 Keith Seitz Unit tests for strncmp_iw_with_mode This patch attempts to make a start at adding unit tests for strncmp_iw_with_mode. While there is quite a bit of testing of this function in other tests, these are currently end-to-end tests. This patch attempts to cover the basics of string matching, white space, C++ ABI tags, and several other topics. However, one area that is ostensibly missing is testing the `match_for_lcd' feature. This is otherwise tested as part of our end-to-end DejaGNU-based testing. 2022-02-25 Keith Seitz Move find_toplevel_char to cp-support.[ch] find_toplevel_char is being used more and more outside of linespec.c, so this patch moves it into cp-support.[ch]. 2022-02-25 GDB Administrator Automatic date update in version.in 2022-02-24 Tom Tromey Andrew Burgess Fix crash in Fortran code PR fortran/28801 points out a gdb crash that can be provoked by certain Fortran code. The bug is that f77_get_upperbound assumes the property is either a constant or undefined, but in this case it is PROP_LOCEXPR. This patch fixes the crash by making this function (and the lower-bound one as well) do the correct check before calling 'const_val'. Thanks to Andrew for writing the test case. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28801 2022-02-24 John Baldwin Revert "do_target_wait_1: Clear TARGET_WNOHANG if the target isn't async." Commit 14b3360508b1 ("do_target_wait_1: Clear TARGET_WNOHANG if the target isn't async.") broke some multi-target tests, such as gdb.multi/multi-target-info-inferiors.exp. The symptom is that execution just hangs at some point. What happens is: 1. One remote inferior is started, and now sits stopped at a breakpoint. It is not "async" at this point (but it "can async"). 2. We run a native inferior, the event loop gets woken up by the native target's fd. 3. In do_target_wait, we randomly choose an inferior to call target_wait on first, it happens to be the remote inferior. 4. Because the target is currently not "async", we clear TARGET_WNOHANG, resulting in synchronous wait. We therefore block here: #0 0x00007fe9540dbb4d in select () from /usr/lib/libc.so.6 #1 0x000055fc7e821da7 in gdb_select (n=15, readfds=0x7ffdb77c1fb0, writefds=0x0, exceptfds=0x7ffdb77c2050, timeout=0x7ffdb77c1f90) at /home/simark/src/binutils-gdb/gdb/posix-hdep.c:31 #2 0x000055fc7ddef905 in interruptible_select (n=15, readfds=0x7ffdb77c1fb0, writefds=0x0, exceptfds=0x7ffdb77c2050, timeout=0x7ffdb77c1f90) at /home/simark/src/binutils-gdb/gdb/event-top.c:1134 #3 0x000055fc7eda58e4 in ser_base_wait_for (scb=0x6250002e4100, timeout=1) at /home/simark/src/binutils-gdb/gdb/ser-base.c:240 #4 0x000055fc7eda66ba in do_ser_base_readchar (scb=0x6250002e4100, timeout=-1) at /home/simark/src/binutils-gdb/gdb/ser-base.c:365 #5 0x000055fc7eda6ff6 in generic_readchar (scb=0x6250002e4100, timeout=-1, do_readchar=0x55fc7eda663c ) at /home/simark/src/binutils-gdb/gdb/ser-base.c:444 #6 0x000055fc7eda718a in ser_base_readchar (scb=0x6250002e4100, timeout=-1) at /home/simark/src/binutils-gdb/gdb/ser-base.c:471 #7 0x000055fc7edb1ecd in serial_readchar (scb=0x6250002e4100, timeout=-1) at /home/simark/src/binutils-gdb/gdb/serial.c:393 #8 0x000055fc7ec48b8f in remote_target::readchar (this=0x617000038780, timeout=-1) at /home/simark/src/binutils-gdb/gdb/remote.c:9446 #9 0x000055fc7ec4da82 in remote_target::getpkt_or_notif_sane_1 (this=0x617000038780, buf=0x6170000387a8, forever=1, expecting_notif=1, is_notif=0x7ffdb77c24f0) at /home/simark/src/binutils-gdb/gdb/remote.c:9928 #10 0x000055fc7ec4f045 in remote_target::getpkt_or_notif_sane (this=0x617000038780, buf=0x6170000387a8, forever=1, is_notif=0x7ffdb77c24f0) at /home/simark/src/binutils-gdb/gdb/remote.c:10037 #11 0x000055fc7ec354d4 in remote_target::wait_ns (this=0x617000038780, ptid=..., status=0x7ffdb77c33c8, options=...) at /home/simark/src/binutils-gdb/gdb/remote.c:8147 #12 0x000055fc7ec38aa1 in remote_target::wait (this=0x617000038780, ptid=..., status=0x7ffdb77c33c8, options=...) at /home/simark/src/binutils-gdb/gdb/remote.c:8337 #13 0x000055fc7f1409ce in target_wait (ptid=..., status=0x7ffdb77c33c8, options=...) at /home/simark/src/binutils-gdb/gdb/target.c:2612 #14 0x000055fc7e19da98 in do_target_wait_1 (inf=0x617000038080, ptid=..., status=0x7ffdb77c33c8, options=...) at /home/simark/src/binutils-gdb/gdb/infrun.c:3636 #15 0x000055fc7e19e26b in operator() (__closure=0x7ffdb77c2f90, inf=0x617000038080) at /home/simark/src/binutils-gdb/gdb/infrun.c:3697 #16 0x000055fc7e19f0c4 in do_target_wait (ecs=0x7ffdb77c33a0, options=...) at /home/simark/src/binutils-gdb/gdb/infrun.c:3716 #17 0x000055fc7e1a31f7 in fetch_inferior_event () at /home/simark/src/binutils-gdb/gdb/infrun.c:4061 Before the aforementioned commit, we would not have cleared TARGET_WNOHANG, the remote target's wait would have returned nothing, and we would have consumed the native target's event. After applying this revert, the testsuite state looks as good as before for me on Ubuntu 20.04 amd64. Change-Id: Ic17a1642935cabcc16c25cb6899d52e12c2f5c3f 2022-02-24 Andrew Burgess gdb: use a range based for loop when iterating over an array Make use of a range based for loop to iterate over a static global array, removing the need to have a null entry at the end of the array. There should be no user visible changes after this commit. 2022-02-24 Dominique Quatravaux Louis-He <1726110778@qq.com> Philippe Blain gdb/darwin: skip over WIFSTOPPED wait4 status On modern Darwin's, there appears to be a new circumstance in which a MACH_NOTIFY_DEAD_NAME message can be received, and which was not previously accounted for: to signal the WIFSTOPPED condition in the debuggee. In that case the debuggee is not dead yet (and in fact, counting it as dead would cause a zombie leak - A process in such a state reparents to PID 1, but cannot be killed). - Read and ignore such messages (counting on the next exception message to let us know of the inferior's new state again) - Refactor logging so as to clearly distinguish between the MACH_NOTIFY_DEAD_NAME cases (WIFEXITED, WIFSTOPPED, signal, or something else), and warn in the last case Change-Id: Ie86904a894e9bd154e6b674b1bfbfbaee7fde3e1 2022-02-24 Simon Marchi gdb/linux-tdep: move "Perms" column right Commit 29ef4c0699e1 ("gdb/linux-tdep.c: Add Perms to the 'info proc mappings' output") has broken test gdb.base/info-proc.exp on Linux, because it changes the output of "info proc mappings" in a way that the test does not expect (my bad for not testing before pushing). I looked at how FreeBSD handles this, since I remembered it did show permission flags. It looks like this: Start Addr End Addr Size Offset Flags File 0x200000 0x243000 0x43000 0x0 r-- CN-- /usr/local/bin/tmux (I think that `Flags` and the flags not being aligned is not intentional) The test passes on FreeBSD, because the test looks for four hex numbers in a row and ignores the rest: ".*Mapped address spaces:.*${hex}${ws}${hex}${ws}${hex}${ws}${hex}.*" I suggest fixing it on Linux by moving the flags column to the same place as in the FreeBSD output. It makes things a bit more consistent between OSes, and we don't have to touch the test. At the same time, make use of the actual length of the permission's string to specify the number of characters to print. Before this patch, the output looks like: Start Addr End Addr Perms Size Offset objfile 0x55dd4b544000 0x55dd4b546000 r--p 0x2000 0x0 /usr/bin/sleep and after, it looks like: Start Addr End Addr Size Offset Perms objfile 0x5622ae662000 0x5622ae664000 0x2000 0x0 r--p /usr/bin/sleep Change-Id: If0fc167b010b25f97a3c54e2f491df4973ccde8f 2022-02-24 Simon Marchi gdb/linux-tdep: make read_mapping return a structure Change read_mapping to return a structure instead of taking many output parameters. Change the string + length output parameters (permissions and device) to be gdb::string_view, since that's what string_view is for (a non-NULL terminated view on a string). No changes in behavior expected. Change-Id: I86e627d84d3dda8c9b835592b0f4de8d90d12112 2022-02-24 GDB Administrator Automatic date update in version.in 2022-02-23 Tom Tromey Fix bug in C++ overload resolution PR c++/28901 points out a bug in C++ overload resolution. When comparing two overloads, one might be better than the other for certain parameters -- but, if that one also has some invalid conversion, then it should never be considered the better choice. Instead, a valid-but-not-apparently-quite-as-good overload should be preferred. This patch fixes this problem by changing how overload comparisons are done. I don't believe it should affect any currently valid overload resolution; nor should it affect resolutions where all the choices are equally invalid. 2022-02-23 Dominik 'Disconnect3d' Czarnota gdb/linux-tdep.c: Add Perms to the 'info proc mappings' output Fixes #28914 and so it adds a 'Perms' (permissions) column to the 'info proc mappings' command output. This will allow users to know the memory pages permissions right away from GDB instead of having to fetch them from the /proc/$pid/maps file (which is also what GDB does internally, but it just did not print that column). Below I am also showing how an example output looks like before and after this commit in case someone wonders. On i386 targets - before this commit: ``` (gdb) info proc mappings process 3461464 Mapped address spaces: Start Addr End Addr Size Offset objfile 0x56555000 0x56556000 0x1000 0x0 /home/dc/src/binutils-gdb/build/a.out 0x56556000 0x56557000 0x1000 0x1000 /home/dc/src/binutils-gdb/build/a.out 0x56557000 0x56558000 0x1000 0x2000 /home/dc/src/binutils-gdb/build/a.out 0x56558000 0x5655a000 0x2000 0x2000 /home/dc/src/binutils-gdb/build/a.out 0xf7fc4000 0xf7fc8000 0x4000 0x0 [vvar] 0xf7fc8000 0xf7fca000 0x2000 0x0 [vdso] 0xf7fca000 0xf7fcb000 0x1000 0x0 /usr/lib/i386-linux-gnu/ld-2.33.so 0xf7fcb000 0xf7fee000 0x23000 0x1000 /usr/lib/i386-linux-gnu/ld-2.33.so 0xf7fee000 0xf7ffb000 0xd000 0x24000 /usr/lib/i386-linux-gnu/ld-2.33.so 0xf7ffb000 0xf7ffe000 0x3000 0x30000 /usr/lib/i386-linux-gnu/ld-2.33.so 0xfffdc000 0xffffe000 0x22000 0x0 [stack] (gdb) ``` On i386 targets - after this commit: ``` (gdb) info proc mappings process 3461464 Mapped address spaces: Start Addr End Addr Perms Size Offset objfile 0x56555000 0x56556000 r--p 0x1000 0x0 /home/dc/src/binutils-gdb/build/a.out 0x56556000 0x56557000 r-xp 0x1000 0x1000 /home/dc/src/binutils-gdb/build/a.out 0x56557000 0x56558000 r--p 0x1000 0x2000 /home/dc/src/binutils-gdb/build/a.out 0x56558000 0x5655a000 rw-p 0x2000 0x2000 /home/dc/src/binutils-gdb/build/a.out 0xf7fc4000 0xf7fc8000 r--p 0x4000 0x0 [vvar] 0xf7fc8000 0xf7fca000 r-xp 0x2000 0x0 [vdso] 0xf7fca000 0xf7fcb000 r--p 0x1000 0x0 /usr/lib/i386-linux-gnu/ld-2.33.so 0xf7fcb000 0xf7fee000 r-xp 0x23000 0x1000 /usr/lib/i386-linux-gnu/ld-2.33.so 0xf7fee000 0xf7ffb000 r--p 0xd000 0x24000 /usr/lib/i386-linux-gnu/ld-2.33.so 0xf7ffb000 0xf7ffe000 rw-p 0x3000 0x30000 /usr/lib/i386-linux-gnu/ld-2.33.so 0xfffdc000 0xffffe000 rw-p 0x22000 0x0 [stack] (gdb) ``` On amd64 targets - after this commit: ``` (gdb) info proc mappings process 3461869 Mapped address spaces: Start Addr End Addr Perms Size Offset objfile 0x555555554000 0x555555555000 r--p 0x1000 0x0 /home/dc/src/binutils-gdb/build/a.out 0x555555555000 0x555555556000 r-xp 0x1000 0x1000 /home/dc/src/binutils-gdb/build/a.out 0x555555556000 0x555555557000 r--p 0x1000 0x2000 /home/dc/src/binutils-gdb/build/a.out 0x555555557000 0x555555559000 rw-p 0x2000 0x2000 /home/dc/src/binutils-gdb/build/a.out 0x7ffff7fc3000 0x7ffff7fc7000 r--p 0x4000 0x0 [vvar] 0x7ffff7fc7000 0x7ffff7fc9000 r-xp 0x2000 0x0 [vdso] 0x7ffff7fc9000 0x7ffff7fca000 r--p 0x1000 0x0 /usr/lib/x86_64-linux-gnu/ld-2.33.so 0x7ffff7fca000 0x7ffff7ff1000 r-xp 0x27000 0x1000 /usr/lib/x86_64-linux-gnu/ld-2.33.so 0x7ffff7ff1000 0x7ffff7ffb000 r--p 0xa000 0x28000 /usr/lib/x86_64-linux-gnu/ld-2.33.so 0x7ffff7ffb000 0x7ffff7fff000 rw-p 0x4000 0x31000 /usr/lib/x86_64-linux-gnu/ld-2.33.so 0x7ffffffdd000 0x7ffffffff000 rw-p 0x22000 0x0 [stack] 0xffffffffff600000 0xffffffffff601000 --xp 0x1000 0x0 [vsyscall] (gdb) ``` Change-Id: I4991f6cc758cd532eae3ae98c29d22e7bd9d9c36 2022-02-23 Patrick O'Neill RISC-V: PR28733, add missing extension info to 'unrecognized opcode' error Currently we report errors as "unrecognized opcode `fence.i'" when the opcode isn't part of the selected extensions. This patch expands that error message to include the missing extension information. For example, now the error message would be "unrecognized opcode `fence.i', extension `zifencei' required". If the opcode is not a part of any extension, the error message reverts to "unrecognized opcode `'". bfd/ pr 28733 * elfxx-riscv.c (riscv_multi_subset_supports_ext): New function, used to return the extension string for each INSN_CLASS_*. * elfxx-riscv.h: Added extern riscv_multi_subset_supports_ext. gas/ pr 28733 * config/tc-riscv.c (struct riscv_ip_error): New structure, contains information about errors that occur within the riscv_ip. (riscv_ip): Use struct riscv_ip_error to report more detailed errors. * testsuite/gas/riscv/c-fld-fsd-fail.l: Updated. * testsuite/gas/riscv/march-imply-i2p1-01.: Likewise. 2022-02-23 Patrick O'Neill RISC-V: PR28733, add missing extension info to 'invalid CSR' error Currently we report errors as "invalid CSR 'fscr' for the current ISA" when the instruction isn't valid. This patch expands that error message to include the missing extension information. For example, now the error message would be "invalid CSR 'fscr' for the current ISA, CSR 'fscr' needs 'f' extension". gas/ pr 28733 * config/tc-riscv.c (riscv_csr_address): Report more details when the CSR is invalid. * testsuite/gas/riscv/csr-version-1p10.l: Updated detailed errors. * testsuite/gas/riscv/csr-version-1p11.l: Likewise. * testsuite/gas/riscv/csr-version-1p12.l: Likewise. * testsuite/gas/riscv/csr-version-1p9p1.l: Likewise. 2022-02-23 Alan Modra binutils 2.38 vs. ppc32 linux kernel Commit b25f942e18d6 made .machine more strict. Weaken it again. * config/tc-ppc.c (ppc_machine): Treat an early .machine specially, keeping sticky options to work around gcc bugs. 2022-02-23 Nelson Chu RISC-V: Updated CSRs to privileged spec v1.12 and debug spec v1.0. * Removed N extension CSRs, ustatus, uie, utvec, uscratch, uepc, ucause, utval and uip. * Removed two supervisor CSRs, sedeleg and sideleg. * Changed debug CSR address of scontext from 0x7aa to 0x5a8. We cannot support different versions of debug specs for now, so only supporting the latest one is the only way to move forward. * Added debug CSRs, mscontext (0x7aa), mcontrol6 (0x7a1, tdata1) and tmexttrigger ((0x7a1, tdata1). * Regarded hcontext as a debug CSR. include/ * opcode/riscv-opc.h: Updated CSRs to privileged spec v1.12 and debug spec v1.0. gas/ * testsuite/gas/riscv/csr.s: Updated CSRs to privileged spec v1.12 and debug spec v1.0. * testsuite/gas/riscv/csr-dw-regnums.d: Likewise. * testsuite/gas/riscv/csr-version-1p10.d: Likewise. * testsuite/gas/riscv/csr-version-1p10.l: Likewise. * testsuite/gas/riscv/csr-version-1p11.d: Likewise. * testsuite/gas/riscv/csr-version-1p11.l: Likewise. * testsuite/gas/riscv/csr-version-1p12.d: Likewise. * testsuite/gas/riscv/csr-version-1p12.l: Likewise. * testsuite/gas/riscv/csr-version-1p9p1.d: Likewise. * testsuite/gas/riscv/csr-version-1p9p1.l: Likewise. * testsuite/gas/riscv/csr-dw-regnums.d: Likewise. * testsuite/gas/riscv/csr-dw-regnums.s: Likewise. 2022-02-23 Tsukasa OI RISC-V: Add Privileged Architecture 1.12 CSRs This commit adds, * Most of CSRs as listed in the Privileged Architecture, version 1.12 (except scontext and mscontext). * Testcases for most CSRs added on the Privileged Architecture, version 1.12 (except moved "scontext" and new "mscontext"). include/ChangeLog: * opcode/riscv-opc.h (CSR_SENVCFG, CSR_MCONFIGPTR, CSR_MENVCFG, CSR_MSTATUSH, CSR_MENVCFGH, CSR_MTINST, CSR_MTVAL2, CSR_MSECCFG, CSR_MSECCFGH, CSR_PMPCFG4, CSR_PMPCFG5, CSR_PMPCFG6, CSR_PMPCFG7, CSR_PMPCFG8, CSR_PMPCFG9, CSR_PMPCFG10, CSR_PMPCFG11, CSR_PMPCFG12, CSR_PMPCFG13, CSR_PMPCFG14, CSR_PMPCFG15, CSR_PMPADDR16, CSR_PMPADDR17, CSR_PMPADDR18, CSR_PMPADDR19, CSR_PMPADDR20, CSR_PMPADDR21, CSR_PMPADDR22, CSR_PMPADDR23, CSR_PMPADDR24, CSR_PMPADDR25, CSR_PMPADDR26, CSR_PMPADDR27, CSR_PMPADDR28, CSR_PMPADDR29, CSR_PMPADDR30, CSR_PMPADDR31, CSR_PMPADDR32, CSR_PMPADDR33, CSR_PMPADDR34, CSR_PMPADDR35, CSR_PMPADDR36, CSR_PMPADDR37, CSR_PMPADDR38, CSR_PMPADDR39, CSR_PMPADDR40, CSR_PMPADDR41, CSR_PMPADDR42, CSR_PMPADDR43, CSR_PMPADDR44, CSR_PMPADDR45, CSR_PMPADDR46, CSR_PMPADDR47, CSR_PMPADDR48, CSR_PMPADDR49, CSR_PMPADDR50, CSR_PMPADDR51, CSR_PMPADDR52, CSR_PMPADDR53, CSR_PMPADDR54, CSR_PMPADDR55, CSR_PMPADDR56, CSR_PMPADDR57, CSR_PMPADDR58, CSR_PMPADDR59, CSR_PMPADDR60, CSR_PMPADDR61, CSR_PMPADDR62, CSR_PMPADDR63): New CSR macros. gas/ChangeLog: * testsuite/gas/riscv/csr-dw-regnums.s: Add new CSRs. * testsuite/gas/riscv/csr-dw-regnums.d: Likewise. * testsuite/gas/riscv/csr.s: Add new CSRs. * testsuite/gas/riscv/csr-version-1p9p1.d: Likewise. * testsuite/gas/riscv/csr-version-1p9p1.l: Likewise. * testsuite/gas/riscv/csr-version-1p10.d: Likewise. * testsuite/gas/riscv/csr-version-1p10.l: Likewise. * testsuite/gas/riscv/csr-version-1p11.d: Likewise. * testsuite/gas/riscv/csr-version-1p11.l: Likewise. * testsuite/gas/riscv/csr-version-1p12.d: Likewise. * testsuite/gas/riscv/csr-version-1p12.l: Likewise. 2022-02-23 Tsukasa OI RISC-V: Reorganize testcases for CFI directives This commit reorganizes and adds some CSRs to csr-dw-regnums.[sd] to make it test the same CSRs as csr.s. gas/ChangeLog: * testsuite/gas/riscv/csr-dw-regnums.s: Reorganize and add defined CSRs tested in csr.s. * testsuite/gas/riscv/csr-dw-regnums.d: Likewise. 2022-02-23 GDB Administrator Automatic date update in version.in 2022-02-22 John Baldwin NEWS: Note that the FreeBSD async target supports async mode. 2022-02-22 John Baldwin inf-ptrace: Add an event_pipe to be used for async mode in subclasses. Subclasses of inf_ptrace_target have to opt-in to using the event_pipe by implementing the can_async_p and async methods. For subclasses which do this, inf_ptrace_target provides is_async_p, async_wait_fd and closes the pipe in the close target method. inf_ptrace_target also provides wrapper routines around the event pipe (async_file_open, async_file_close, async_file_flush, and async_file_mark) for use in target methods such as async. inf_ptrace_target also exports a static async_file_mark_if_open function which can be used in SIGCHLD signal handlers. 2022-02-22 John Baldwin Enable async mode in the target in attach_cmd. If the attach target supports async mode, enable it after the attach target's ::attach method returns. fbsd-nat: Return nullptr rather than failing ::thread_name. ptrace on FreeBSD cannot be used against running processes and instead fails with EBUSY. This meant that 'info threads' would fail if any of the threads were running (for example when using schedule-multiple=on in gdb.base/fork-running-state.exp). Instead of throwing errors, just return nullptr as no thread name is better than causing info threads to fail completely. 2022-02-22 John Baldwin fbsd-nat: Various cleanups to the ::resume entry debug message. Move the message from 'show debug fbsd-lwp' to 'show debug fbsd-nat' since it is helpful for debugging async target support and not just LWP support. Use target_pid_to_str to format the ptid and log the step and signo arguments. 2022-02-22 John Baldwin fbsd-nat: Include ptrace operation in error messages. 2022-02-22 John Baldwin fbsd-nat: Implement async target support. This is a fairly simple version of async target support. Synchronous mode still uses blocking waitpid() calls in inf_ptrace::wait() unlike the Linux native target which always uses WNOHANG and uses sigsuspend() for synchronous operation. Asynchronous mode registers an event pipe with the core as a file handle and writes to the pipe when SIGCHLD is raised. TARGET_WNOHANG is handled by inf_ptrace::wait(). 2022-02-22 John Baldwin inf-ptrace: Support async targets in inf_ptrace_target::wait. - Handle TARGET_WNOHANG by passing WNOHANG to waitpid and returning TARGET_WAITKIND_IGNORE if there are no events to report. - Handle a race in async mode where SIGCHLD might signal the event pipe for an event that has already been reported. If the event was the exit of the last child process, waitpid() will fail with ECHILD rather than returning a pid of 0. For this case, return TARGET_WAITKIND_NO_RESUMED. 2022-02-22 John Baldwin inf-ptrace: Return an IGNORE event if waitpid() fails. Previously this returned a TARGET_WAITKIND_SIGNALLED event for inferior_ptid. However, inferior_ptid is invalid during ::wait() methods after the multi-target changes, so this was triggering an assertion further up the stack. do_target_wait_1: Clear TARGET_WNOHANG if the target isn't async. Previously, TARGET_WNOHANG was cleared if a target supported async mode even if async mode wasn't currently enabled. This change only permits TARGET_WNOHANG if async mode is enabled. 2022-02-22 John Baldwin Don't enable async mode at the end of target ::resume methods. Now that target_resume always enables async mode after target::resume returns, these calls are redundant. The other place that target resume methods are invoked outside of target_resume are as the beneath target in record_full_wait_1. In this case, async mode should already be enabled when supported by the target before the resume method is invoked due to the following: In general, targets which support async mode run as async until ::wait returns TARGET_WAITKIND_NO_RESUMED to indicate that there are no unwaited for children (either they have exited or are stopped). When that occurs, the loop in wait_one disables async mode. Later if a stopped child is resumed, async mode is re-enabled in do_target_resume before waiting for the next event. In the case of record_full_wait_1, this function is invoked from the ::wait target method when fetching an event. If the underlying target supports async mode, then an earlier call to do_target_resume to resume the child reporting an event in the loop in record_full_wait_1 would have already enabled async mode before ::wait was invoked. In addition, nothing in the code executed in the loop in record_full_wait_1 disables async mode. Async mode is only disabled higher in the call stack in wait_one after ::wait returns. It is also true that async mode can be disabled by an INF_EXEC_COMPLETE event passed to inferior_event_handle, but all of the places that invoke that are in the gdb core which is "above" a target ::wait method. Note that there is an earlier call to enable async mode in linux_nat_target::resume. That call also marks the async event pipe to report an existing event after enabling async mode, so it needs to stay. 2022-02-22 John Baldwin Enable async mode on supported targets in target_resume. Enabling async mode above the target layer removes duplicate code in ::resume methods of async-capable targets. Commit 5b6d1e4fa4f ("Multi-target support") enabled async mode in do_target_resume after target_resume returns which is a step in this direction. However, other callers of target_resume such as target_continue do not enable async mode. Rather than enabling async mode in each of the callers after target_resume returns, enable async mode at the end of target_resume. gdbserver linux-low: Convert linux_event_pipe to the event_pipe class. Use event_pipe from gdbsupport in place of the existing file descriptor array. gdb linux-nat: Convert linux_nat_event_pipe to the event_pipe class. Use event_pipe from gdbsupport in place of the existing file descriptor array. 2022-02-22 John Baldwin gdbsupport: Add an event-pipe class. This pulls out the implementation of an event pipe used to implement target async support in both linux-low.cc (gdbserver) and linux-nat.c (gdb). This will be used to replace the existing event pipe in linux-low.cc and linux-nat.c in future commits. Co-Authored-By: Lancelot SIX 2022-02-22 Ruslan Kabatsayev gdb: fix detection of compilation and linking flags for source-highlight Currently there are two problems with the detection of source-highlight via pkg-config in GDB's configure script: 1. The LDFLAGS variable is used to pass the 'pkg-config --libs' output to AC_LINK_IFELSE, which results in the "-L/some/path -lsource-highlight" preceding the conftest.cpp, which can result in a failure to find symbols referenced in conftest.cpp, if the linker is using --as-needed by default. 2. The CFLAGS variable is used to pass the 'pkg-config --cflags' output to AC_LINK_IFELSE. However, as the current language is C++, AC_LINK_IFELSE will actuall use CXXFLAGS, not CFLAGS, so any flags returned from pkg-config will not be seen. This patch fixes both of these mistakes, allowing GDB to correctly configure and build using source-highlight installed into a custom prefix, e.g. ~/opt/gdb-git (because the system version of source-highlight is too old). 2022-02-22 Philippe Blain gdb/testsuite/README: point to default value of INTERNAL_GDBFLAGS The INTERNAL_GDBFLAGS runtest variable was updated in 55c3ad88013 ([gdb/testsuite] Prevent pagination in GDB_INTERNALFLAGS, 2020-10-26) to disable pagination, and in aae1c79a03a (PR python/12227..., 2010-12-07) to point to the data directory, but its default value mentioned in the testsuite's README was not kept up to date. To avoid it getting out of sync even more, point the reader to the definition of the variable in lib/gdb.exp, and move the explanation of the different flags there. Also adjust the example in the README so it follows the flags added in 55c3ad88013. Change-Id: I3533608a7d6ae5198af09c7dc7743bde24c19ed7 2022-02-22 Kito Cheng RISC-V: Maintain a string to hold the canonical order Using dummy entry in riscv_supported_std_ext cause confusing and wrongly support `b` and `k` extensions. bfd/ * elfxx-riscv.c (riscv_supported_std_ext): Drop unsupported extensions. (riscv_ext_canonical_order): New. (riscv_init_ext_order): Use riscv_ext_canonical_order rather than riscv_supported_std_ext to compute canonical order. V2 Changes: - Use `*ext` rather than `*ext != NULL` for checking is reach end of string. 2022-02-22 GDB Administrator Automatic date update in version.in 2022-02-21 Alan Modra Re: ld: Support customized output section type "DO NOT EDIT!" says the comment at the top of bfd-in2.h. Move the new type field where it belongs. PR ld/28841 * section.c (struct bfd_section): Add type. Formatting. (BFD_FAKE_SECTION): Formatting. * bfd-in2.h: Regenerate. 2022-02-21 Mike Frysinger sim: gdbinit: hoist setup to common code This was left in subdirs because of the dynamic cgen usage. However, we can move this breakpoint call to runtime and let gdb detect whether the symbol exists. 2022-02-21 Andrew Burgess gdb/testsuite: relax pattern in new gdb.mi/mi-multi-commands.exp test I saw some failures in the test gdb.mi/mi-multi-commands.exp that I added recently. This test was added in commit: commit d08cbc5d3203118da5583296e49273cf82378042 Date: Wed Dec 22 12:57:44 2021 +0000 gdb: unbuffer all input streams when not using readline The failures I see only occurred when my machine was very heavily loaded. In this test I send multiple commands from dejagnu to gdb with a single send_gdb call. In a well behaving world what I want to happen is that the gdb console sees both commands arrive and echos the text of those commands. Then gdb starts processing the first command, prints the result, and then processes the second command, and prints the result. However, what I saw in my loaded environment was that only after sending the two commands, only the first command was echoed to gdb's terminal. Then gdb started processing the first command, and started to write the output. Now, mixed in with the first command output, the second command was echoed to gdb's terminal. Finally, gdb would finish printing the first command output, and would read and handle the second command. This mixing of command echoing with the first command output was causing the test matching patterns to fail. In this commit I change the command I use in the test from a CLI command to an MI command, this reduces the number of lines of output that come from the test, CLI commands sent through the MI interpreter are echoed back like this: (gdb) set $a = "FIRST COMMAND" &"set $a = \"FIRST COMMAND\"\n" ^done (gdb) While this is not the case for true MI command: (gdb) -data-evaluate-expression $a ^done,value="\"FIRST COMMAND\"" (gdb) Less output makes for simpler patterns to match against. Next, when sending two command to gdb I was previously trying to spot the output of the first command followed by the prompt with nothing between. This is not really needed, for the first command I can look for just the ^done,value="\"FIRST COMMAND\"" string, then I can start looking for the output of the second command. So long as the second pattern matches up to the gdb prompt, then I can be sure than nothing is left over in the expect buffer to muck up later matches. As to see the second command output gdb must have read in the second command, the second command output never suffers from the corruption that the first command output does. Since making this change, I've not seen a failure in this test. 2022-02-21 Andrew Burgess gdb: avoid nullptr access in dbxread.c from read_dbx_symtab This fixes a GDB crash reported in bug pr/28900, related to reading in some stabs debug information. In this commit my goal is to stop GDB crashing. I am not trying to ensure that GDB makes the best possible use of the available stabs debug information. At this point I consider stabs a legacy debug format, with only limited support in GDB. So, the problem appears to be that, when reading in the stabs data, we need to find a N_SO entry, this is the entry that defines the start of a compilation unit (or at least the location of a corresponding source file). It is while handling an N_SO that GDB creates a psymtab to hold the incoming debug information (symbols, etc). The problem we hit in the bug is that we encounter some symbol information (an N_PC entry) outside of an N_SO entry - that is we find some symbol information that is not associated with any source file. We already have some protection for this case, look (in read_dbx_symtab) at the handling of N_PC entries of type 'F' and 'f', if we have no psymtab (the pst variable is nullptr) then we issue a complaint. However, for whatever reason, in both 'f' and 'F' handling, there is one place where we assume that the pst variable (the psymtab) is not nullptr. This is a mistake. In this commit, I guard these two locations (in 'f' and 'F' handling) so we no longer assume pst is not nullptr. While I was at it, I audited all the other uses of pst in read_dbx_symtab, and in every potentially dangerous case I added a nullptr check, and issue a suitable complaint if pst is found to be nullptr. It might well be true that we could/should do something smarter if we see a debug symbol outside of an N_SO entry, and if anyone wanted to do that work, they're welcome too. But this commit is just about preventing the nullptr access, and the subsequent GDB crash. I don't have any tests for this change, I have no idea how to generate weird stabs data for testing. The original binary from the bug report now loads just fine without GDB crashing. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28900 2022-02-21 Andrew Burgess gdb: make use of std::string in dbxread.c and xcoffread.c While taking a look through dbxread.c I spotted a couple of places where making use of std::string would remove the need for manual memory allocation and memcpy. During review Simon pointed out that the same code exists in xcoffread.c, so I've applied the same fix there too. There should be no user visible changes after this commit. 2022-02-21 GDB Administrator Automatic date update in version.in 2022-02-20 Lancelot SIX gdb: Only paginate for filtered output in fputs_maybe_filtered A have had situation where a unfiltered output (done using fputs_unfiltered) ended up triggering pagination. The backtrace for this was: ... #24 0x000055839377ee4e in check_async_event_handlers () at ../../gdb/async-event.c:335 #25 0x0000558394b67b57 in gdb_do_one_event () at ../../gdbsupport/event-loop.cc:216 #26 0x0000558394587454 in gdb_readline_wrapper (prompt=0x7ffd907712d0 "--Type for more, q to quit, c to continue without paging--") at ../../gdb/top.c:1148 #27 0x0000558394707270 in prompt_for_continue () at ../../gdb/utils.c:1438 #28 0x00005583947088b3 in fputs_maybe_filtered (linebuffer=0x60c0000f4000 " [...quite big message...]", stream=0x60300028e9d0, filter=0) at ../../gdb/utils.c:1752 #29 0x0000558394708e57 in fputs_unfiltered (linebuffer=0x60c0000f4000 " [...quite big message...]", stream=0x60300028e9d0) at ../../gdb/utils.c:1811 ... This comes from what appears to be a oversight in fputs_maybe_filtered. This function has a FILTER parameter which if true makes the function pause after every screenful (i.e. triggers pagination). The filter parameter is correctly used to guard the first place where prompt_for_continue. There is a second place in the function which can call prompt_for_continue, but is currently unguarded. I believe that this is an oversight, this patch fixes that. Tested on Linux-x86_64, no regression observed. Change-Id: Iad8ffd50a87cf20077500878e2564b5a7dc81ece 2022-02-20 GDB Administrator Automatic date update in version.in 2022-02-19 Dominique Quatravaux gdb/darwin: remove not-so-harmless spurious call to `wait4` As seen in https://sourceware.org/bugzilla/show_bug.cgi?id=24069 this code will typically wait4() a second time on the same process that was already wait4()'d a few lines above. While this used to be harmless/idempotent (when we assumed that the process already exited), this now causes a deadlock in the WIFSTOPPED case. The early (~2019) history of bug #24069 cautiously suggests to use WNOHANG instead of outright deleting the call. However, tests on the current version of Darwin (Big Sur) demonstrate that gdb runs just fine without a redundant call to wait4(), as would be expected. Notwithstanding the debatable value of conserving bug compatibility with an OS release that is more than a decade old, there is scant evidence of what that double-wait4() was supposed to achieve in the first place - A cursory investigation with `git blame` pinpoints commits bb00b29d7802 and a80b95ba67e2 from the 2008-2009 era, but fails to answer the "why" question conclusively. Co-Authored-By: Philippe Blain Change-Id: Id4e4415d66d6ff6b3552b60d761693f17015e4a0 2022-02-19 GDB Administrator Automatic date update in version.in 2022-02-18 Tom Tromey Add constructor to bound_minimal_symbol This adds a constructor to bound_minimal_symbol, to avoid a build failure with clang that Simon pointed out. I also took the opportunity to remove some redundant initializations, and to change one use of push_back to emplace_back, as suggested by Simon. 2022-02-18 Roland McGrath Fix typo in ld.texi ld/ * ld.texi (Output Section Type): Fix typo in @code syntax. 2022-02-18 Simon Marchi gdb: remove newlines from some linux_nat_debug_printf calls Change-Id: I80328fab7096221356864b5a4fb30858b48d2c10 2022-02-18 GDB Administrator Automatic date update in version.in 2022-02-17 Nick Clifton Updated Serbian translations for the bfd, gold, ld and opcodes directories 2022-02-17 GDB Administrator Automatic date update in version.in 2022-02-16 Fangrui Song ld: Support customized output section type bfd/ PR ld/28841 * bfd-in2.h (struct bfd_section): Add type. (discarded_section): Add field. * elf.c (elf_fake_sections): Handle bfd_section::type. * section.c (BFD_FAKE_SECTION): Add field. * mri.c (mri_draw_tree): Update function call. ld/ PR ld/28841 * ld.texi: Document new output section type. * ldlex.l: Add new token TYPE. * ldgram.y: Handle TYPE=exp. * ldlang.h: Add type_section to list of section types. * ldlang.c (lang_add_section): Handle type_section. (map_input_to_output_sections): Handle type_section. * testsuite/ld-scripts/output-section-types.t: Add tests. * testsuite/ld-scripts/output-section-types.d: Update. 2022-02-16 Andrew Burgess gdb/tui: add a missing white space character Just adds a missing space. There should be no user visible changes after this commit. gdb: convert callback_handler_installed from int to bool Simple int to bool conversion on callback_handler_installed in event-top.c. There should be no user visible changes after this commit. 2022-02-16 Alan Modra gas local label and dollar label handling Much of the gas source and older BFD source use "long" for function parameters and variables, when other types would be more appropriate. This patch fixes one of those cases. Dollar labels and numeric local labels do not need large numbers. Small positive itegers are usually all that is required. Due to allowing longs, it was possible for fb_label_name and dollar_label_name to overflow their buffers. * symbols.c: Delete unnecessary forward declarations. (dollar_labels, dollar_label_instances): Use unsigned int. (dollar_label_defined, dollar_label_instance): Likewise. (define_dollar_label): Likewise. (fb_low_counter, fb_labels, fb_label_instances): Likewise. (fb_label_instance_inc, fb_label_instance): Likewise. (fb_label_count, fb_label_max): Make them size_t. (dollar_label_name, fb_label_name): Rewrite using sprintf. * symbols.h (dollar_label_defined): Update prototype. (define_dollar_label, dollar_label_name): Likewise. (fb_label_instance_inc, fb_label_name): Likewise. * config/bfin-lex.l (yylex): Remove unnecessary casts. * expr.c (integer_constant): Likewise. * read.c (read_a_source_file): Limit numeric label range to int. 2022-02-16 Alan Modra ubsan: s_app_line integer overflow There are quite a few ubsan warnings in gas. This one disappears with a code tidy. * read.c (s_app_line): Rename 'l' to 'linenum'. Avoid ubsan warning. 2022-02-16 Alan Modra pe_ILF_make_a_symbol_reloc segfault pei-aarch64-little apparently lacks support for BFD_RELOC_RVA. * peicode.h (pe_ILF_make_a_symbol_reloc): Don't segfault on NULL howto. 2022-02-16 Alan Modra What to do when sh_addralign isn't a power of two BFD generally doesn't handle anything but a power of two section alignment, and ELF sh_addralign is required to be an integral power of two (or zero) by the ELF spec. Of course this is ignored by fuzzers, and because bfd_log2 rounds up, we can end up with alignment_power being 32 on a 32-bit object or 64 on a 64-bit object. That then triggers ubsan warnings in places like bfd_update_compression_header where we want to convert from alignment_power back to an alignment. I suppose we could reject object files that have non-compliant sh_addralign, but I think it's also reasonable to use the greatest power of two divisor of sh_addralign, ie. the rightmost 1 bit. * elf.c (_bfd_elf_make_section_from_shdr): Use greatest power of two divisor of sh_addralign. (_bfd_elf_assign_file_position_for_section): Likewise. (assign_file_positions_for_non_load_sections): Likewise. 2022-02-16 Alan Modra asan: buffer overflow in vms-alpha.c * vms-alpha.c (evax_bfd_print_dst): Sanity check another place printing strings. asan : use of uninitialized value in buffer_and_nest * macro.c (buffer_and_nest): Don't read past end of string buffer. asan: buffer overflow in peXXigen.c * peXXigen.c (_bfd_XX_bfd_copy_private_bfd_data_common): Properly sanity check DataDirectory[PE_DEBUG_DATA].Size. 2022-02-16 Hans-Peter Nilsson sim/common: Improve sim_dump_memory head comment As requested by Mike. * sim-memopt.c: Improve head comment. 2022-02-16 Hans-Peter Nilsson sim/testsuite/cris/c/stat3.c: Fix formatting nit * c/stat3.c (main): Fix formatting nit. 2022-02-16 Mike Frysinger sim: testsuite: cleanup the istarget * logic Now that the multitarget testing has settled, clean up the cases where istarget * is used. This ends up being mostly style unindenting. 2022-02-16 GDB Administrator Automatic date update in version.in 2022-02-15 H.J. Lu i386: Update I386_NEED_DYNAMIC_RELOC_TYPE_P for DT_TEXTREL Update I386_NEED_DYNAMIC_RELOC_TYPE_P to allow R_386_TLS_IE for relocation in read-only section. bfd/ PR ld/28894 * elfxx-x86.h (I386_NEED_DYNAMIC_RELOC_TYPE_P): Allow R_386_TLS_IE. ld/ PR ld/28894 * testsuite/ld-i386/i386.exp: Run pr28894. * testsuite/ld-i386/pr28894.d: New file. * testsuite/ld-i386/pr28894.s: Likewise. 2022-02-15 Hans-Peter Nilsson sim/testsuite: Default global_cc_os and global_cc_works properly There was an omission on 3e6dc39ed7a8 "sim/testsuite: Set global_cc_os also when no compiler is found"; global_cc_os wasn't set for other than the primary target, which means that the "unguarded" use of global_cc_os in testsuite/cris/c/c.exp caused the dreaded "ERROR: can't read "global_cc_os": no such variable" when e.g. configuring for pru-elf and doing "make check-sim". Better initializing both variables at the top to default values, rather than adding another single 'set global_cc_os ""', to reduce the risk of not setting them properly if or when that if-statement-chain is made longer. sim/testsuite: * lib/sim-defs.exp (sim_init_toolchain): Default global_cc_os and global_cc_works properly, before if-chain. 2022-02-15 H.J. Lu x86: Add has_sib to struct instr_info Add has_sib to struct instr_info and use SIB info only if ins->has_sib is true. PR binutils/28892 * i386-dis.c (instr_info): Add has_sib. (get_sib): Set has_sib. (OP_E_memory): Replace havesib with ins->has_sib. (OP_VEX): Use ins->sib.index only if ins->has_sib is true. 2022-02-15 Lancelot SIX gdb: Respect the DW_CC_nocall attribute It is possible for a compiler to optimize a function in a such ways that the function does not follow the calling convention of the target. In such situation, the compiler can use the DW_AT_calling_convention attribute with the value DW_CC_nocall to tell the debugger that it is unsafe to call the function. The DWARF5 standard states, in 3.3.1.1: > If the value of the calling convention attribute is the constant > DW_CC_nocall, the subroutine does not obey standard calling > conventions, and it may not be safe for the debugger to call this > subroutine. Non standard calling convention can affect GDB's assumptions in multiple ways, including how arguments are passed to the function, how values are returned, and so on. For this reason, it is unsafe for GDB to try to do the following operations on a function with marked with DW_CC_nocall: - call / print an expression requiring the function to be evaluated, - inspect the value a function returns using the 'finish' command, - force the value returned by a function using the 'return' command. This patch ensures that if a command which relies on GDB's knowledge of the target's calling convention is used on a function marked nocall, GDB prints an appropriate message to the user and does not proceed with the operation which is unreliable. Note that it is still possible for someone to use a vendor specific value for the DW_AT_calling_convention attribute for example to indicate the use of an alternative calling convention. This commit does not prevent this, and target dependent code can be adjusted if one wanted to support multiple calling conventions. Tested on x86_64-Linux, with no regression observed. Change-Id: I72970dae68234cb83edbc0cf71aa3d6002a4a540 2022-02-15 Lancelot SIX Simon Marchi gdb: add a symbol* argument to get_return_value Add an argument to the get_return_value function to indicate the symbol of the function the debuggee is returning from. This will be used by the following patch. Since the function return type can be deduced from the symbol remove the value_type argument which becomes redundant. No user visible change after this patch. Tested on x86_64-linux. Change-Id: Idf1279f1f7199f5022738a6679e0fa63fbd22edc 2022-02-15 H.J. Lu x86-64: Use MAXPAGESIZE for the relro segment alignment Adjust x86-64 linker tests after reverting commit 31b4d3a16f200bf04db8439a63b72bba7af4e1be Author: Alan Modra Date: Thu Feb 3 08:57:47 2022 +1030 PR28824, relro security issues, x86 keep COMMONPAGESIZE relro to use MAXPAGESIZE for the end of the relro segment alignment, like other ELF targets. * testsuite/ld-x86-64/plt-main-bnd.dd: Updated. * testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise. * testsuite/ld-x86-64/plt-main-ibt.dd: Likewise. * testsuite/ld-x86-64/pr14207.d: Likewise. * testsuite/ld-x86-64/pr18176.d: Likewise. * testsuite/ld-x86-64/pr20830a-now.d: Likewise. * testsuite/ld-x86-64/pr20830a.d: Likewise. * testsuite/ld-x86-64/pr20830b-now.d: Likewise. * testsuite/ld-x86-64/pr20830b.d: Likewise. * testsuite/ld-x86-64/pr21038a-now.d: Likewise. * testsuite/ld-x86-64/pr21038a.d: Likewise. * testsuite/ld-x86-64/pr21038b-now.d: Likewise. * testsuite/ld-x86-64/pr21038b.d: Likewise. * testsuite/ld-x86-64/pr21038c-now.d: Likewise. * testsuite/ld-x86-64/pr21038c.d: Likewise. 2022-02-15 H.J. Lu Revert "PR28824, relro security issues, x86 keep COMMONPAGESIZE relro" This reverts commit 31b4d3a16f200bf04db8439a63b72bba7af4e1be. 2022-02-15 GDB Administrator Automatic date update in version.in 2022-02-14 Hans-Peter Nilsson sim/testsuite/cris: If failing compilation, mark C tests as errors ...when we know we have a working compiler. This will reduce the risk of faulty edits by exposing them rather than hiding them as "unresolved". It also harmonizes behavior with that of run_sim_test. * c/c.exp: Mark C tests failing compilation test errors. 2022-02-14 Hans-Peter Nilsson sim/testsuite/cris: Remove faulty use of basename in C tests Calls to basename were added here as part of commit e1e1ae6e9b5e "sim: testsuite: fix objdir handling", but that commit missed adding "#include " or the equivalent GNU extension, see basename(3). Fixing that shows a logical error in the change to openpf1.c; the non-/-prefixed code-path was changed instead of the "/"-prefixed code-path, which is the one executed after that commit. For "newlib" these tests failed linking after that commit. Recent newlib has the (asm-renamed) GNU-extension-variant of basename, but we're better off not using it at all. Unfortunately, compilation failures for C tests run by the machinery in c.exp are currently just marked "unresolved", in contrast to C and assembler tests run by calling run_sim_test. The interaction of calling with the full program-path vs. use of --sysroot exposes a consistency problem: when --sysroot is used, argv[0] isn't the path by which the program can find itself. It's undecided whether argv[0] for the program running in the simulator should be edited (related to the naked argument to the simulator before passing on to the simulated program) to remove a leading --sysroot. Either way, such a change would be out of scope for this commit. * c/stat3.c (mybasename): New macro. Use it instead of basename. * c/openpf1.c: Correct basename-related change and update related comment. 2022-02-14 Hans-Peter Nilsson sim: Add sim_dump_memory for debugging Intended to be called from the debugger tool. sim/common: * sim-memopt.c (sim_dump_memory): New function. 2022-02-14 Hans-Peter Nilsson sim: Fix use of out-of-tree assembler and linker when testing With commit 7a259895bb2d "sim: testsuite: expand arch specific toolchain settings", trying to use out-of-tree ld and as at test-time broke for the "primary target", like when testing a release-tarball. Subsequent to that commit, all assembler tests without in-tree-built tools FAIL, getting errors when trying to call $(abs_builddir)/../gas/as-new. But, that isn't the actual culprint; it's actually it's its immediate predecessor, commit 8996c21067373 "sim: testsuite: setup per-port toolchain settings for multitarget build", which hardcodes in-tree-paths to those tools instead of considering e.g. $(_FOR_TARGET), the preferred overridable variable for single-target builds, as set up by the toplevel Makefile. This commit calls GCC_TARGET_TOOL (a deceptive name; gcc-specific features aren't used) from toplev/config/acx.m4, somewhat like calls in toplev/configure.ac but without the NCN_STRICT_CHECK_TARGET_TOOLS step, for each X to find a value for $(_FOR_TARGET). N.B.: in-tree tools still override any ${target}-${tool} found in $PATH, i.e. only previously broken builds are affected. The variables $(_FOR_TARGET) are usually overridden by the toplevel Makefile to the same value or better, but has to be set here too, as automake "wants" Makefiles to be self-contained (you get an error pointing out that the variable may be empty). If it hadn't been for that, SIM_AC_CHECK_TOOLCHAIN_FOR_PRIMARY_TARGET would not be needed. This detail should only (positively) affect users invoking "make check" in sim/ instead of "make check-sim" (or "make check") at the toplevel. Now the output from "configure" matches the target tools actually used by sim at test-time, for the "primary target". Using $(CC) for "example-" targets CC_FOR_TARGET is not changed, as that appears to be a deliberate special-case. Note that all tools still have to be installed and present in $PATH at configure-time to be properly used at test-time. sim: * m4/sim_ac_toolchain.m4 (SIM_AC_CHECK_TOOLCHAIN_FOR_PRIMARY_TARGET): New defun. (SIM_TOOLCHAIN_VARS): Call it using AC_REQUIRE, and use variables AS_FOR_TARGET, LD_FOR_TARGET and CC_FOR_TARGET instead of hard-coded values. * Makefile.in, configure: Regenerate. 2022-02-14 Hans-Peter Nilsson sim cris: Unbreak --disable-sim-hardware builds With --disable-sim-hardware (--enable-sim-hardware=no), whose default was changed to --enable-sim-hardware(=yes) in commit 34cf51120683, building for cris-elf fails as sim_hw_parse then doesn't exist. A cris-elf simulator configured for --enable-sim-hardware (or the default after to the mentioned commit) runs about 2.5x slower than one configured --disable-sim-hardware. A further 2-5% performance regression was not investigated. When sim_hw_parse doesn't exist, --cris-900000xx can't be supported. The best action here is to remove it completely, so its absence can be identified through --help, but avoiding littering the code with "#if WITH_HW". sim/cris: * sim-if.c (cris_options) [WITH_HW]: Conditionalize support of option --cris-900000xx. (sim_open) [WITH_HW]: Conditionalize sim_hw_parse call. 2022-02-14 Hans-Peter Nilsson sim/testsuite/cris: As applicable, require simoption --cris-900000xx Apply the new run_sim_test option "require" as in "#require simoption --cris-900000xx" for all tests using that option. This allows a clean test-suite-run for a build with --disable-sim-hardware, where that option is not supported, by skipping those tests as "untested". sim/testsuite/cris: * asm/io1.ms, asm/io2.ms, asm/io3.ms, asm/io6.ms, asm/io7.ms: Call "#require: simoption --cris-900000xx". 2022-02-14 Hans-Peter Nilsson sim/testsuite: Support "requires: simoption <--name-of-option>" Simulator features can be present or not, typically depending on different-valued configure options, like --enable-sim-hardware[=off|=on]. To avoid failures in test-suite-runs when testing such configurations, a new predicate is needed, as neither "target", "progos" nor "mach" fits cleanly. The immediate need was to check for presence of a simulator option, but rather than a specialized "requires-simoption:" predicate I thought I'd handle the general (parametrized) need, so here's a generic predicate machinery and a (first) predicate to use together with it; checking whether a particular option is supported, by looking at "run --help" output. This was inspired by the check_effective_target_ machinery in the gcc test-suite. Multiple "requires: " form a list of predicates (with parameters), to be used as a conjunction. sim/testsuite: * lib/sim-defs.exp (sim_check_requires_simoption): New function. (run_sim_test): Support "requires: ". 2022-02-14 Hans-Peter Nilsson sim/testsuite/cris/hw/rv-n-cris/irq1.ms: Disable due to randomness For reasons that remain largely to be investigated (besides the apparent lack of synchronization between two processes), this test fails randomly, with two different sets of common outputs. Curiously, that doesn't happen for the other similar tests. There's a comment that mentions this, though that doesn't make it a sustainable part of a test-suite. (Known-blinking tests should be disabled until fixed.) sim/testsuite/cris: * hw/rv-n-cris/irq1.ms: Disable by use of a never-matched "progos" value. 2022-02-14 Hans-Peter Nilsson sim/testsuite/cris/c: Use -sim3 but only for newlib targets Commit a39487c6685f "sim: cris: use -sim with C tests for cris-elf targets" caused " -sim" to be appended to CFLAGS_FOR_TARGET for cris*-*-elf, where testing had until then relied on "RUNTESTFLAGS=--target_board=cris-sim" being passed when running "make check-sim", adding the right options. While "-sim" happens to work, the baseboard-file cris-sim.exp uses "-sim3" so for consistency use that instead. Then commit b42f20d2ac72 "sim: testsuite: drop most specific istarget checks" caused " -sim" to be appended for *all* targets, which just doesn't work. For example, for crisv32-linux-gnu, that's not a recognized option and will cause a dejagnu error and further testing in c.exp will be aborted. While cris-sim.exp appends "-static" for *-linux-gnu, further changes in the test-suite have caused "linux"-specific tests to break, so that part will be tended to separately. But, save and restore CFLAGS_FOR_TARGET around the modification and use where needed, to not have the CRIS-specific modification affect a continuing test-run (possibly for other targets). sim/testsuite/cris: * c/c.exp (CFLAGS_FOR_TARGET): Replace appended option " -sim" with " -sim3", but do it conditionally for newlib targets. Save and restore CFLAGS_FOR_TARGET in saved_CFLAGS_FOR_TARGET such that it doesn't affect the value of CFLAGS_FOR_TARGET outside c.exp. 2022-02-14 Hans-Peter Nilsson sim/testsuite: Set global_cc_os also when no compiler is found If we don't set this variable, it doesn't exist, and using "#progos:" in an assembler-file will cause an error rather than just skipping the test, viz: Running /src/sim/testsuite/cris/hw/rv-n-cris/rvc.exp ... ERROR: tcl error sourcing /src/sim/testsuite/cris/hw/rv-n-cris/rvc.exp. ERROR: can't read "global_cc_os": no such variable while executing "if { $opts(progos) != "" && $opts(progos) != $global_cc_os } { untested $subdir/$name return }" (procedure "run_sim_test" line 102) Neither the commit introducing progos, nor the top comment in run_sim_test, mentions progos as intended only for C tests, or that its use must be gated on $global_cc_works != 0, so (not) setting it in the no-working-compiler path seems just overlooked. Allowing it to be used for assembler tests makes it usable for e.g. an always-false predicate and in expressions in .exp files without gating on $global_cc_works != 0. With this patch, global_cc_os is set to "", just as for "unknown OS". sim/testsuite: * lib/sim-defs.exp (sim_init_toolchain): Set global_cc_os also when no working target C compiler is found. 2022-02-14 Hans-Peter Nilsson sim/testsuite/cris: Assembler testcase for PRIx32 usage bug Several C test-cases exposed the bug, but let's have one for people who test using just the assembler and linker. * asm/endmem1.ms: New test. 2022-02-14 Hans-Peter Nilsson sim cris: Correct PRIu32 to PRIx32 In 5ee0bc23a68f "sim: clean up bfd_vma printing" there was an additional introduction of PRIx32 and PRIu32 but just in sim/cris/sim-if.c. One type of bug was fixed in commit d16ce6e4d581 "sim: cris: fix memory setup typos" but one remained; the PRIu32 usage is wrong, as hex output is desired; note the 0x prefix. Without this fix, you'll see output like: memory map 0:0x4000..0x5fff (8192 bytes) overlaps 0:0x0..0x16383 (91012 bytes) program stopped with signal 6 (Aborted). for some C programs, like some of the ones in the sim/cris/c testsuite from where the example is taken (freopen2.c). The bug behavior was with memory allocation. With an attempt to allocate memory using the brk syscall such that the room up to the next 8192-byte "page boundary" wasn't sufficient, the simulator memory allocation machinery horked on a consistency error when trying to allocate a memory block to raise the "end of the data segment": there was already memory allocated at that address. Unfortunately, none of the programs in sim/cris/asm exposed this bug at the time, but an assembler test-case is committed after this fix. sim/cris: * sim-if.c (sim_open): Correct PRIu32 to PRIx32. 2022-02-14 Sergei Trofimovich microblaze: fix fsqrt collicion to build on glibc-2.35 * microblaze-opcm.h: Renamed 'fsqrt' to 'microblaze_fsqrt'. * microblaze-opc.h: Follow 'fsqrt' rename. 2022-02-14 Tom Tromey Remove LA_PRINT_STRING This removes the LA_PRINT_STRING macro, in favor of using ordinary method calls. Remove LA_PRINT_CHAR This removes the LA_PRINT_CHAR macro, in favor of using ordinary method calls. Remove LA_PRINT_TYPE This removes the LA_PRINT_TYPE macro, in favor of using ordinary method calls. 2022-02-14 Andrew Burgess gdb/python: move styling support to gdb.styling This commit moves the two Python functions that are used for styling into a new module, gdb.styling, there's then a small update in python.c so GDB can find the functions in their new location. The motivation for this change is purely to try and reduce the clutter in the top-level gdb module, and encapsulate related functions into modules. I did ponder documenting these functions as part of the Python API, however, doing so would effectively "fix" the API, and I'm still wondering if there's improvements that could be made, also, the colorize function is only called in some cases now that GDB prefers libsource-highlight, so it's not entirely sure how this would work as part of a user facing API. Still, despite these functions never having been part of a documented API, it is possible that a user out there has overridden these to, in some way, customize how GDB performs styling. Moving the function as I propose in this patch could break things for that user, however, fixing this breakage is trivial, and, as these functions were never documented, I don't think we should be obliged to not break user code that relies on them. 2022-02-14 Andrew Burgess gdb: use python to colorize disassembler output This commit adds styling support to the disassembler output, as such two new commands are added to GDB: set style disassembler enabled on|off show style disassembler enabled In this commit I make use of the Python Pygments package to provide the styling. I did investigate making use of libsource-highlight, however, I found the highlighting results to be inferior to those of Pygments; only some mnemonics were highlighted, and highlighting of register names such as r9d and r8d (on x86-64) was incorrect. To enable disassembler highlighting via Pygments, I've added a new extension language hook, which is then implemented for Python. This hook is very similar to the existing hook for source code colorization. One possibly odd choice I made with the new hook is to pass a gdb.Architecture through, even though this is currently unused. The reason this argument is not used is that, currently, styling is performed identically for all architectures. However, even though the Python function used to perform styling of disassembly output is not part of any documented API, I don't want to close the door on a user overriding this function to provide architecture specific styling. To do this, the user would inevitably require access to the gdb.Architecture, and so I decided to add this field now. The styling is applied within gdb_disassembler::print_insn, to achieve this, gdb_disassembler now writes its output into a temporary buffer, styling is then applied to the contents of this buffer. Finally the gdb_disassembler buffer is copied out to its final destination stream. There's a new test to check that the disassembler output includes some escape sequences, though I don't check for specific colours; the precise colors will depend on which instructions are in the disassembler output, and, I guess, how pygments is configured. The only negative change with this commit is how we currently style addresses in GDB. Currently, when the disassembler wants to print an address, we call back into GDB, and GDB prints the address value using the `address` styling, and the symbol name using `function` styling. After this commit, if pygments is used, then all disassembler styling is done through pygments, and this include the address and symbol name parts of the disassembler output. I don't know how much of an issue this will be for people. There's already some precedent for this in GDB when we look at source styling. For example, function names in styled source listings are not styled using the `function` style, but instead, either GNU Source Highlight, or pygments gets to decide how the function name should be styled. If the Python pygments library is not present then GDB will continue to behave as it always has, the disassembler output is mostly unstyled, but the address and symbols are styled using the `address` and `function` styles, as they are today. However, if the user does `set style disassembler enabled off`, then all disassembler styling is switched off. This obviously covers the use of pygments, but also includes the minimal styling done by GDB when pygments is not available. 2022-02-14 H.J. Lu ld: Keep indirect symbol from IR if referenced from shared object Don't change indirect symbol defined in IR to undefined if it is referenced from shared object. bfd/ PR ld/28879 * elflink.c (_bfd_elf_merge_symbol): Don't change indirect symbol defined in IR to undefined if it is referenced from shared object. ld/ PR ld/28879 * testsuite/ld-plugin/lto.exp: Run PR ld/28879 tests. * testsuite/ld-plugin/pr28879a.cc: New file. * testsuite/ld-plugin/pr28879b.cc: Likewise. 2022-02-14 GDB Administrator Automatic date update in version.in 2022-02-13 Alan Modra PR28882, build failure with gcc-4.2 due to use of 0b literals PR 28882 * elf/loongarch.h: Replace binary literals with hex. 2022-02-13 Alan Modra Don't pass around expld.dataseg pointer The better to see any code that accesses expld.dataseg. * ldexp.c (fold_segment_end): Remove seg parameter. Adjust calls. (fold_segment_align, fold_segment_relro_end): Likewise. * ldlang.c (lang_size_segment): Likewise. (lang_size_relro_segment_1, lang_find_relro_sections_1): Likewise. 2022-02-13 Alan Modra Remove bfd ELF_RELROPAGESIZE Now that ld properly aligns the end of the relro segment, the hack to make relro work on powerpc can disappear. bfd/ * bfd.c (bfd_emul_get_commonpagesize): Remove relro param. Don't return bed->relropagesize. * elf-bfd.h (struct elf_backend_data): Remove relropagesize. * elfxx-target.h (ELF_RELROPAGESIZE): Remove. * elf32-ppc.c (ELF_RELROPAGESIZE): Don't define. * elf64-ppc.c: Likewise. * bfd-in2.h: Regenerate. ld/ * ldemul.c (after_parse_default): Adjust bfd_emul_get_commonpagesize call. 2022-02-13 Alan Modra PR28824, relro security issues, x86 keep COMMONPAGESIZE relro x86 treats MAXPAGESIZE as a memory optimisation parameter, actual hardware paging is always COMMPAGESIZE of 4k. Use COMMONPAGESIZE for the end of the relro segment alignment. The previous patch regresses pr18176, increasing the testcase file size from 322208 to 2099872 bytes. Fixing this on x86 will require introducing a gap after the end of the relro segment (of up to relropagesize-1 bytes). PR 28824 PR 18176 * ld.h (ld_config_type): Add relro_use_commonpagesize field. * ldexp.c (fold_segment_align): Set relropagesize depending on relro_use_commonpagesize. * emultempl/elf-x86.em (elf_x86_create_output_section_statements): Set relro_use_commonpagesize. * testsuite/ld-x86-64/pr18176.d: xfail. 2022-02-13 Alan Modra PR28824, relro security issues Background ========== There are constraints on layout of binaries to meet demand paging and memory protection requirements. Demand paged binaries must have file offset mod pagesize equal to vma mod pagesize. Memory protection (executable, read, write status) can only change at page boundaries. The linker's MAXPAGESIZE variable gives the page size for these layout constraints. In a typical basic executable with two memory segments, text (RE) and data (RW), the data segment must start on a different page to the last text segment page. For example, with 64k pages and a small executable of 48k text and 1k data, the text segment might start at address 0x10000 and data at 0x20000 for a total of two 64k memory pages. Demand paging would require the image on disk to be 64k+1k in size. We can do better than that. If the data segment instead starts at 0x2c000 (the end of the text segment plus one 64k page) then there are still only two memory pages, but the disk image is now smaller, 48k+1k in size. This is why the linker normally starts the data segment at the end of the text segment plus one page. That simple heuristic isn't ideal in all cases. Changing our simple example to one with 64k-1 text size, following that heuristic would result in data starting at 0x2ffff. Now we have two 64k memory data pages for a data segment of 1k! If the data segment instead started at 0x30000 we'd get a single data segment page at the cost of 1 byte extra in the disk image, which is likely a good trade-off. So the linker does adjust the simple heuristic. Just how much disk image size increase is allowed is controlled by the linker's COMMONPAGESIZE variable. A PT_GNU_RELRO segment overlays the initial part of the data segment, saying that those pages should be made read-only after relocation by the dynamic loader. Page granularity for memory protection means that the end of the relro segment must be at a page boundary. The problem =========== Unfortunately most targets currently only align the end of the relro segment to COMMONPAGESIZE. That results in only partial relro protection if an executable is running with MAXPAGESIZE pages, since any part of the relro segment past the last MAXPAGESIZE boundary can't be made read-only without also affecting sections past the end of the relro segment. I believe this problem arose because x86 always runs with 4k (COMMPAGESIZE) memory pages, and therefore using a larger MAXPAGESIZE on x86 is for reasons other than the demand paging and memory page protection boundary requirements. The solution ============ Always end the relro segment on a MAXPAGESIZE boundary, except for x86. Note that the relro segment, comprising of sections at the start of the data segment, is sized according to how those sections are laid out. That means the start of the relro segment is fixed relative to its end. Which also means the start of the data segment must be at a fixed address mod MAXPAGESIZE. So for relro the linker can't play games with the start of the data segment to save disk space. At least, not without introducing gaps between the relro sections. In fact, because the linker was starting layout using its simple heuristic of starting the data segment at the end of the text segment plus one page, it was sometimes introducing page gaps for no reason. See pr28743. PR 28824 PR 28734 * ldexp.c (fold_segment_align): When relro, don't adjust up by offset within page. Set relropagesize. (fold_segment_relro_end): Align to relropagesize. * ldexp.h (seg_align_type): Rename pagesize to commonpagesize. Add relropagesize. Comment. * ldlang.c (lang_size_segment): Adjust to suit field renaming. (lang_size_relro_segment_1): Align relro_end using relropagesize. 2022-02-13 GDB Administrator Automatic date update in version.in 2022-02-12 GDB Administrator Automatic date update in version.in 2022-02-11 H.J. Lu x86: Disallow invalid relocation against protected symbol I am checking this into master and will backport it to 2.38 branch. H.J ---- On x86, GCC 12 supports -mno-direct-extern-access to enable canonical reference to protected function and disable copy relocation. With -mno-direct-extern-access, the canonical protected function symbols must be accessed via canonical reference and the protected data symbols in shared libraries are non-copyable. Under glibc 2.35, non-canonical reference to the canonical protected function will get the run-time error: ./y: internal_f: ./libfoo.so: non-canonical reference to canonical protected function and copy relocations against the non-copyable protected symbols will get the run-time error: ./x: internal_i: ./libfoo.so: copy relocation against non-copyable protected symbol Update x86 linker to disallow non-canonical reference to the canonical protected function: ld: plt.o: non-canonical reference to canonical protected function `internal_f' in libfoo.so ld: failed to set dynamic section sizes: bad value and copy relocation against the non-copyable protected symbol: ld: main.o: copy relocation against non-copyable protected symbol `internal_i' in libfoo.so at link-time. bfd/ PR ld/28875 * elf-properties.c (_bfd_elf_parse_gnu_properties): Don't skip shared libraries for GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS. * elf32-i386.c (elf_i386_scan_relocs): Disallow non-canonical reference to canonical protected function. * elf64-x86-64.c (elf_x86_64_scan_relocs): Likewise. * elfxx-x86.c (elf_x86_allocate_dynrelocs): Don't allow copy relocation against non-copyable protected symbol. ld/ PR ld/28875 * testsuite/ld-i386/i386.exp: Check non-canonical reference to canonical protected function and check copy relocation against non-copyable protected symbol. * testsuite/ld-i386/pr21997-1.err: New file. * testsuite/ld-i386/pr28875.err: Likewise. * testsuite/ld-i386/pr28875a.c: Likewise. * testsuite/ld-i386/pr28875b.c: Likewise. * testsuite/ld-x86-64/pr21997-1a.err: Updated. * testsuite/ld-x86-64/pr21997-1b.err: Likewise. * testsuite/ld-x86-64/pr28875-data.err: New file. * testsuite/ld-x86-64/pr28875-func.err: Likewise. * testsuite/ld-x86-64/x86-64.exp: Check non-canonical reference to canonical protected function and check copy relocation against non-copyable protected symbol. 2022-02-11 Tom Tromey Add initializers to bound_minimal_symbol This adds initializers to bound_minimal_symbol, allowing for the removal of some calls to memset. 2022-02-11 Bhuvanendra Kumar N gdb/fortran: support ptype and print commands for namelist variables Gfortran supports namelists (a Fortran feature); it emits DW_TAG_namelist and DW_TAG_namelist_item dies. But gdb does not process these dies and does not support 'print' or 'ptype' commands on namelist variables. An attempt to print namelist variables results in gdb bailing out with the error message as shown below. (gdb) print nml No symbol "nml" in current context. This commit is to make the print and ptype commands work for namelist variables and its items. Sample output of these commands is shared below, with fixed gdb. (gdb) ptype nml type = Type nml integer(kind=4) :: a integer(kind=4) :: b End Type nml (gdb) print nml $1 = ( a = 10, b = 20 ) 2022-02-11 Bruno Larsen gdb: fix until behavior with trailing !is_stmt lines When using the command "until", it is expected that GDB will exit a loop if the current instruction is the last one related to that loop. However, if there were trailing non-statement instructions, "until" would just behave as "next". This was noticeable in clang-compiled code, but might happen with gcc-compiled as well. PR gdb/17315 relates to this problem, as running gdb.base/watchpoint.exp with clang would fail for this reason. To better understand this issue, consider the following source code, with line numbers marked on the left: 10: for (i = 0; i < 10; ++i) 11: loop_body (); 12: other_stuff (); If we transform this to pseudo-assembler, and generate a line table, we could end up with something like this: Address | Pseudo-Assembler | Line | Is-Statement? 0x100 | i = 0 | 10 | Yes 0x104 | loop_body () | 11 | Yes 0x108 | i = i + 1 | 10 | Yes 0x10c | if (i < 10): | 10 | No 0x110 | goto 0x104 | 10 | No 0x114 | other_stuff () | 12 | Yes Notice the two non-statement instructions at the end of the loop. The problem is that when we reach address 0x108 and use 'until', hoping to leave the loop, GDB sets up a stepping range that runs from the start of the function (0x100 in our example) to the end of the current line table entry, that is 0x10c in our example. GDB then starts stepping forward. When 0x10c is reached GDB spots that we have left the stepping range, that the new location is not a statement, and that the new location is associated with the same source line number as the previous stepping range. GDB then sets up a new stepping range that runs from 0x10c to 0x114, and continues stepping forward. Within that stepping range the inferior hits the goto (at 0x110) and loops back to address 0x104. At 0x104 GDB spots that we have left the previous stepping range, that the new address is marked as a statement, and that the new address is for a different source line. As a result, GDB stops and returns control to the user. This is not what the user was expecting, they expected GDB to exit the loop. The fix proposed in this patch, is that, when the user issues the 'until' command, and GDB sets up the initial stepping range, GDB will check subsequent SALs (symtab_and_lines) to see if they are non-statements associated with the same line number. If they are then the end of the initial stepping range is extended to the end of the non-statement SALs. In our example above, the user is at 0x108 and uses 'until', GDB now sets up a stepping range from the start of the function 0x100 to 0x114, the first address associated with a different line. Now as GDB steps around the loop it never leaves the initial stepping range. It is only when GDB exits the loop that we leave the stepping range, and the stepping finishes at address 0x114. This patch also adds a test case that can be run with gcc to test that this functionality is not broken in the future. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17315 2022-02-11 Richard Sandiford gas/doc: Fix "a true results" typo 2022-02-11 Jan Vrany gdb: extend the information printed by 'maint info jit' This commit updates the output of 'maint info jit' to print not just the jit_code_entry address, but also the symfile address, and the symfile size. The new information could be obtained by looking into target memory at the contents of the jit_code_entry, but, by storing this information within gdb at the time the jit object is loaded, it is now possible to check if the jit_code_entry has been modified in target memory behind gdb's back. Additionally, the symfile address is the same address that is now used in the objfile names after commit 4a620b7e. One test that relies on the output of 'maint info jit' was updated to allow for the new output format. 2022-02-11 Michael Forney bfd: Remove return with expression in void function * bfd.c (bfd_set_gp_value): Remove return with expression in void function. 2022-02-11 Tiezhu Yang gdb: LoongArch: Add Makefile, configure and NEWS This commit adds Makefile, configure and NEWS for LoongArch. gdb: LoongArch: Add initial native Linux support This commit adds initial native Linux support for LoongArch. gdb: LoongArch: Add initial Linux target support This commit adds initial Linux target support for LoongArch. gdb: LoongArch: Add initial baremetal support This commit adds initial baremetal support for LoongArch. gdb: LoongArch: Add initial target description support This commit adds initial target description support for LoongArch. 2022-02-11 Mike Frysinger libctf: delete unused libctf_TEXINFOS It's not clear what this was meant for, but it's not used by anything, and the info pages still generate fine without it. 2022-02-11 Simon Marchi gdb/linux: remove ptrace support check for exec, fork, vfork, vforkdone, clone, sysgood I think it's safe to remove checking support for these ptrace features, they have all been added in what is now ancient times (around the beginning of Linux 2.6). This allows removing a bit of complexity in linux-nat.c and nat/linux-ptrace.c. It also allows saving one extra fork every time we start debugging on Linux: linux_check_ptrace_features forks a child process to test if some ptrace features are supported. That child process forks a grand-child, to test whether ptrace reports an event for the fork by the child. This is no longer needed, if we assume the kernel supports reporting forks. PTRACE_O_TRACEVFORKDONE was introduced in Linux in this change, in 2003: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=45c1a159b85b3b30afd26a77b4be312226bba416 PTRACE_O_TRACESYSGOOD was supported at least as of this change, in 2002: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=acc7088569c8eef04eeed0eff51d23bb5bcff964 PTRACE_O_TRACEFORK, PTRACE_O_TRACEVFORK, PTRACE_O_TRACEEXEC and PTRACE_O_TRACECLONE were introduced in this change, in 2002: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=a0691b116f6a4473f0fa264210ab9b95771a2b46 Change-Id: Iffb906549a89cc6b619427f976ec044706ab1e8d 2022-02-11 GDB Administrator Automatic date update in version.in 2022-02-10 Andrew Burgess gdb/infrun: some extra infrun debug print statements While reviewing a different patch I wanted to know more about what was going on during GDB's stepping. I added some extra infrun debug print calls, and I thought these might be useful to others. 2022-02-10 GDB Administrator Automatic date update in version.in 2022-02-09 Nick Clifton Update the obsolete list and how-to-make-a-release documentation now that the 2.38 release is out. 2022-02-09 Alan Modra PR28763, SIGSEGV during processing of program headers via readelf PR 28763 * readelf.c (process_file_header): Discard any cached program headers if there is an extension field for e_phnum in first section header. 2022-02-09 Alan Modra Work around gcc-4 warnings in elf64-ppc.c elf64-ppc.c: In function 'ppc64_elf_size_dynamic_sections': elf64-ppc.c:10309:45: error: value computed is not used [-Werror=unused-value] ++lgot_ents, ++lgot_masks, isym != NULL && isym++) It is of course a silly warning, fixed in later versions of gcc. I wrote "isym != NULL && isym++" rather than the simpler "isym++" to stop sanitisers complaining about incrementing a NULL pointer. isym is of course unused in any code path where it might start off as NULL. Sometimes you can't win. So don't try to be clever in reading local symbols only when needed. 99 times out of 100 they will be cached anyway. * elf64-ppc.c (ppc64_elf_size_dynamic_sections): Avoid annoying warnings by always reading local syms. (ppc64_elf_layout_multitoc): Likewise. 2022-02-09 Peilin Ye Test --only-keep-debug on ELF relocatables Add a test for commit 7c4643efe7be, which fixed --only-keep-debug for ELF relocatables. * testsuite/binutils-all/objcopy.exp (keep_debug_symbols_for_elf_relocatable): New test. 2022-02-09 GDB Administrator Automatic date update in version.in 2022-02-08 Palmer Dabbelt RISC-V: Stop reporting warnings for mismatched extension versions The extension version checking logic is really just too complicated to encode into the linker, trying to do so causes more harm than good. This removes the checks and the associated tests, leaving the logic to keep the largest version of each extension linked into the target. bfd/ * elfnn-riscv.c (riscv_version_mismatch): Rename to riscv_update_subset_version, and stop reporting warnings on version mismatches. (riscv_merge_std_ext): Adjust calls to riscv_version_mismatch. (riscv_merge_multi_letter_ext): Likewise. ld/ * testsuite/ld-riscv-elf/attr-merge-arch-failed-01.d: Remove * testsuite/ld-riscv-elf/attr-merge-arch-failed-01a.s: Likewise * testsuite/ld-riscv-elf/attr-merge-arch-failed-01b.s: Likewise * testsuite/ld-riscv-elf/attr-merge-arch-failed-02.d: Likewise * testsuite/ld-riscv-elf/attr-merge-arch-failed-02a.s: Likewise * testsuite/ld-riscv-elf/attr-merge-arch-failed-02b.s: Likewise * testsuite/ld-riscv-elf/attr-merge-arch-failed-02c.s: Likewise * testsuite/ld-riscv-elf/attr-merge-arch-failed-02d.s: Likewise * testsuite/ld-riscv-elf/attr-merge-user-ext-01.d: New test. * testsuite/ld-riscv-elf/attr-merge-user-ext-rv32i21_m2p0.s: Likewise. * testsuite/ld-riscv-elf/attr-merge-user-ext-rv32i21_m2p1.s: Likewise. * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Remove obselete attr-merge-arch-failed-{01,02}, replace with attr-merge-user-ext-01. 2022-02-08 Alan Modra PR28862, heap-buffer-overflow in parse_stab_string I have no info on the format of a "SUNPRO C++ Namespace" stab, so am relying on the previous code being correct in parsing these stabs. Just don't allow NULs anywhere in the stab. PR 28862 * stabs.c (parse_stab_string): Don't overrun buffer when parsing 'Y' stab. 2022-02-08 Alan Modra Re: elf: Check symbol version without any symbols * testsuite/ld-elf/pr24718-1.d: Don't xfail for hppa64. 2022-02-08 Andrew Burgess gdb: remove tailing newlines from index_cache_debug calls I noticed that most of the calls to index_cache_debug include a trailing newline. As the new debug mechanism already adds a newline, that means all of these debug calls result in a blank line being printed, which I think is a mistake. Remove all the trailing newlines. I also reformatted one of the index_cache_debug where a string will now fit onto a single line. Unless 'set debug index-cache on' is used, there should be no visible change in output after this commit. 2022-02-08 H.J. Lu i386: Allow GOT32 relocations against ABS symbols GOT32 relocations are allowed since absolute value + addend is stored in the GOT slot. Tested on glibc 2.35 build with GCC 11.2 and -Os. bfd/ PR ld/28870 * elfxx-x86.c (_bfd_elf_x86_valid_reloc_p): Also allow GOT32 relocations. ld/ PR ld/28870 * testsuite/ld-i386/i386.exp: Run pr28870. * testsuite/ld-i386/pr28870.d: New file. * testsuite/ld-i386/pr28870.s: Likewise. 2022-02-08 GDB Administrator Automatic date update in version.in 2022-02-07 Andrew Burgess gdb/python: allow Value.format_string to return styled output Add a new argument to the gdb.Value.format_string method, 'styling'. This argument is False by default. When this argument is True, then the returned string can contain output styling escape sequences. When this argument is False, then the returned string will not contain any styling escape sequences. If the returned string is going to be printed to the user, then it is often nice to retain the GDB styling. For the testing, we need to adjust the TERM environment variable, as we do for all the styling tests. I'm now running all of the C tests in gdb.python/py-format-string.exp in an environment where styling could be generated, but only my new test should actually produce styled output, hopefully this will catch the case where a bug might cause format_string to always produce styled output. 2022-02-07 Lancelot SIX gdb: make thread_info::m_thread_fsm a std::unique_ptr While working on function calls, I realized that the thread_fsm member of struct thread_info is a raw pointer to a resource it owns. This commit changes the type of the thread_fsm member to a std::unique_ptr in order to signify this ownership relationship and slightly ease resource management (no need to manually call delete). To ensure consistent use, the field is made a private member (m_thread_fsm). The setter method (set_thread_fsm) can then check that it is incorrect to associate a FSM to a thread_info object if another one is already in place. This is ensured by an assertion. The function run_inferior_call takes an argument as a pointer to a call_thread_fsm and installs it in it in a thread_info instance. Also change this function's signature to accept a unique_ptr in order to signify that the ownership of the call_thread_fsm is transferred during the call. No user visible change expected after this commit. Tested on x86_64-linux with no regression observed. Change-Id: Ia1224f72a4afa247801ce6650ce82f90224a9ae8 2022-02-07 Andrew Burgess gdb: unbuffer all input streams when not using readline This commit should fix PR gdb/28711. What's actually going on is pretty involved, and there's still a bit of the story that I don't understand completely, however, from my observed results, I think that the change I propose making here (or something very similar) is going to be needed. The original bug report involves using eclipse to drive gdb using mi commands. A separate tty is spun off in which to send gdb the mi commands, this tty is created using the new-ui command. The behaviour observed is that, given a particular set of mi commands being sent to gdb, we sometimes see an ESPIPE error from a lseek call, which ultimately results in gdb terminating. The problems all originate from gdb_readline_no_editing_callback in gdb/event-top.c, where we can (sometimes) perform calls to fgetc, and allow glibc to perform buffering on the FILE object being used. I say sometime, because, gdb_readline_no_editing_callback already includes a call to disable the glibc buffering, but this is only done if the input stream is not a tty. In our case the input stream is a tty, so the buffering is left in place. The first step to understanding why this problem occurs is to understand that eclipse sends multiple commands to gdb very quickly without waiting for and answer to each command, eclipse plans to collect all of the command results after sending all the commands to gdb. In fact, eclipse sends the commands to gdb that they appear to arrive in the gdb process as a single block of data. When reproducing this issue within the testsuite I find it necessary to send multiple commands using a single write call. The next bit of the story gets a little involved, and this is where my understanding is not complete. I can describe the behaviour that I observe, and (for me at least) I'm happy that what I'm seeing, if a little strange, is consistent. In order to fully understand what's going on I think I would likely need to dive into kernel code, which currently seems unnecessary given that I'm happy with the solution I'm proposing. The following description all relates to input from a tty in which I'm not using readline. I see the same problems either when using a new-ui tty, or with gdb's standard, non-readline, mi tty. Here's what I observe happening when I send multiple commands to gdb using a single write, if I send gdb this: command_1\ncommand_2\ncommand_3 then gdb's event loop will wake up (from its select) as it sees there is input available. We call into gdb_readline_no_editing_callback, where we call fgetc, glibc will do a single big read, and get back just: command_1\n that is, despite there being multiple lines of input available, I consistently get just a single line. From glibc a single character is returned from the fgetc call, and within gdb we accumulate characters, one at a time, into our own buffer. Eventually gdb sees the '\n' character, and dispatches the whole 'command_1' into gdb's command handler, which processes the command and prints the result. We then return to gdb_readline_no_editing_callback, which in turn returns to gdb's event loop where we re-enter the select. Inside the select we immediately see that there is more input waiting on the input stream, drop out of the select, and call back into gdb_readline_no_editing_callback. In this function we again call fgetc where glibc performs another big read. This time glibc gets: command_2\n that is, we once again get just a single line, despite there being a third line available. Just like the first command we copy the whole string, character by character into gdb's buffer, then handle the command. After handling the command we go to the event loop, enter, and then exit the select, and call back to the function gdb_readline_no_editing_callback. In gdb_readline_no_editing_callback we again call fgetc, this time glibc gets the string: command_3\n like before, we copy this to gdb's buffer and handle the command, then we return to the event loop. At this point the select blocks while we wait for more input to arrive. The important bit of this is that someone, somewhere is, it appears, taking care to split the incoming write into lines. My next experiment is to try something like: this_is_a_very_long_command\nshort_command\n However, I actually make 'this_is_a_very_long_command' very long, as in many hundreds of characters long. One way to do this is: echo xxxxxx.....xxxxx and just adding more and more 'x' characters as needed. What I'm aiming for is to have the first command be longer than glibc's internal read buffer, which, on my machine, is 1024 characters. However, for this discussion, lets imagine that glibc's buffer is just 8 characters (we can create just this situation by adding a suitable setbuf call into gdb_readline_no_editing_callback). Now, if I send gdb this data: abcdefghij\nkl\n The first read from glibc will get 'abcdefgh', that is a full 8 character buffer. Once gdb has copied these to its buffer we call fgetc again, and now glibc will get 'ij\n', that is, just like before, multiple lines are split at the '\n' character. The full command, which is now in gdb's buffer can be handled 'abcdefghij', after which we go (via the event loop) back to gdb_readline_no_editing_callback. Now we call fgetc, and glibc will get 'kl\n', which is then handled in the normal way. So far, so good. However, there is, apparently, one edge case where the above rules don't apply. If the '\n' character is the first character read from the kernel, then the incoming lines are not split up. So, given glibc's 8 character buffer, if I send gdb this: abcdefgh\nkl\n that is the first command is 8 characters plus a newline, then, on the first read (from within glibc) we get 'abcdefgh' in a single buffer. As there's no newline gdb calls fgetc again, and glibc does another large read, now we get: \nkl\n which doesn't follow the above pattern - the lines are not split into separate buffers! So, gdb reads the first character from glibc using fgetc, this is the newline. Now gdb has a complete command, and so the command is handled. We then return to the event loop and enter the select. The problem is that, as far as the kernel is concerned, there is no more input pending, it's all been read into glibc's buffer, and so the select doesn't return. The second command is basically stuck in glibc's buffer. If I send another command to gdb, or even just send an empty command (a lone newline) then the select returns, we call into gdb_readline_no_editing_callback, and now gdb sees the second command. OK, so the above is interesting, but it doesn't explain the ESPIPE error. Well, that's a slightly different, but related issue. The ESPIPE case will _only_ show up when using new-ui to create the separate tty for mi commands, and is a consequence of this commit: commit afe09f0b6311a4dd1a7e2dc6491550bb228734f8 Date: Thu Jul 18 17:20:04 2019 +0100 Fix for using named pipes on Windows Prior to this commit, the new-ui command would open the tty three times, once each for stdin, stderr, and stdout. After this commit we open the tty just once and reuse the FILE object for all three roles. Consider the problem case, where glibc has (unexpectedly) read the second command into its internal buffer. When we handle the first command we usually end up having to write something to the mi output stream. After the above commit the same FILE object represents both the input and output streams, so, when gdb tries to write to the FILE object, glibc spots that there is input pending within the input buffer, and so assumes that we have read ahead of where we should be in the input file. To correct for this glibc tries to do an lseek call to reposition the file offset of the output stream prior to writing to it. However, as the output stream is a tty, and seeking is not supported on a tty, this lseek call fails, this results in the ESPIPE, which ultimately causes gdb to terminate. So, now we understand why the ESPIPE triggers (which was what caused the gdb crash in the original bug report), and we also understand that sometime gdb will not handle the second command in a timely fashion (if the first command is just the wrong length). So, what to do about all this? We could revert the commit mentioned above (and implement its functionality another way). This would certainly resolve the ESPIPE issue, the buffered input would now only be on the input stream, the output stream would have no buffered input, and so glibc would never try to lseek, and so we'd never get the ESPIPE error. However, this only solves one of the two problems. We would still suffer from the problem where, if the first command is just the wrong length, the second command will not (immediately) get handled. The only solution I can see to this problem is to unbuffer the input stream. If glibc is not buffering the input, but instead, we read incoming data character by character from the kernel, then everything will be fine. As soon as we see the newline at the end of the first command we will handle the first command. As glibc will have no buffered input it will not be tempted to lseek, so no ESPIPE error. When we go have to the event loop there will be more data pending in the kernel, so the select will immediately return, and the second command will be processed. I'm tempted to suggest that we should move the unbuffering of the input stream out of gdb_readline_no_editing_callback and do it somewhere earlier, more like when we create the input streams. However, I've not done that in this commit for a couple of reasons: 1. By keeping the unbuffering in gdb_readline_no_editing_callback I'm making the smallest possible change that fixes the bug. Moving the unbuffering somewhere better can be done as a refactor later, if that 's felt to be important, 2. I don't think making repeated calls to unbuffer the input will have that much performance impact. We only make the unbuffer call once per call to gdb_readline_no_editing_callback, and, if the input stream is already unbuffered we'll return pretty quickly, so I don't see this as being massively costly, 3. Tom is currently doing lots of gdb stream management changes and I want to minimise the chances we'll conflict. So, this commit just changes gdb_readline_no_editing_callback to always unbuffer the input stream. The test for this issue sends two commands in a loop, with the first command growing bigger each time around the loop. I actually make the first command bigger by just adding whitespace to the front, as gdb still has to read the complete command (including whitespace) via glibc, so this is enough to trigger the bug. The original bug was reported when using a virtual machine, and in this situation we see this in the strace output: read(9, "70-var-info-path-expression var1.aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa", 1024) = 64 read(9, "\n71-var-info-path-expression var1.aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa\n", 1024) = 67 I'm not completely sure what's going on here, but it appears that the kernel on the virtual machine is delivering the input to glibc slower than I see on my real hardware; glibc asks for 1024 bytes, but only gets 64 bytes the first time. In the second read we see the problem case, the first character is the newline, but then the entire second command is included. If I run this exact example on my real hardware then the first command would not be truncated at 64 bytes, instead, I'd expect to see the newline included in the first read, with the second command split into a second read. So, for testing, I check cases where the first command is just a few characters (starting at 8 character), all the way up to 2048 characters. Hopefully, this should mean we hit the problem case for most machine setups. The only last question relates to commit afe09f0b6311a4d that I mentioned earlier. That commit was intended to provide support for Microsoft named pipes: https://docs.microsoft.com/en-us/windows/win32/ipc/named-pipes I know next to nothing about this topic beyond a brief scan of the above link, but I think these windows named pipe are closer in behaviour to unix sockets than to unix named fifos. I am a little nervous that, after the above commit, we now use the same FILE for in, err, and out streams. In contrast, in a vanilla C program, I would expect different FILE objects for each stream. Still, I'm reluctant to revert the above commit (and provide the same functionality a different way) without a specific bug to point at, and, now that the streams are unbuffered, I expect a lot of the read and write calls are going straight to the kernel with minimal glibc involvement, so maybe it doesn't really matter. Anyway, I haven't touched the above patch, but it is something to keep in mind when working in this area. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28711 2022-02-07 Andrew Burgess gdb/disasm: combine the no printing disassembler setup code We have three places in gdb where we initialise a disassembler that will not print anything (used for figuring out the length of instructions, or collecting other information from the disassembler). Each of these places has its own stub function to act as a print like callback, the stub function is identical in each case, and just does nothing. In this commit I create a new function to initialise a disassembler that doesn't print anything, and have all three locations use this new function. There's now only one non-printing stub function. There should be no user visible changes after this commit. 2022-02-07 Tankut Baris Aktemur gdb: add the 'set/show suppress-cli-notifications' command GDB already has a flag to suppress printing notification events, such as thread and inferior context switches, on the CLI. This is used internally when executing commands. Make the flag available to the user via a new command. This is expected to be useful in scripts. For instance, suppose that when Inferior 1 gets to a certain state, you want to add and set up a new inferior using the commands below, but you also want to have a reduced/clean output. define do-setup printf "Setting up Inferior 2...\n" add-inferior -exec a.out inferior 2 break file.c:3 run inferior 1 printf "Done\n" end Currently, GDB prints (gdb) do-setup Setting up Inferior 2... [New inferior 2] Added inferior 2 on connection 1 (native) [Switching to inferior 2 [] (/tmp/a.out)] Breakpoint 2 at 0x1155: file file.c, line 3. Thread 2.1 "a.out" hit Breakpoint 2, main () at file.c:3 3 return 0; [Switching to inferior 1 [process 7670] (/tmp/test)] [Switching to thread 1.1 (process 7670)] #0 main () at test.c:2 2 int a = 1; Done GDB's Python API make it possible to capture and return GDB's output, but this does not work for all the streams. In particular, CLI notification events are not captured: (gdb) python gdb.execute("do-setup", False, True) [Switching to inferior 2 [] (/tmp/a.out)] Thread 2.1 "a.out" hit Breakpoint 2, main () at file.c:3 3 return 0; [Switching to inferior 1 [process 8263] (/tmp/test)] [Switching to thread 1.1 (process 8263)] #0 main () at test.c:2 2 int a = 1; You can use the new "set suppress-cli-notifications" command to suppress the output: (gdb) set suppress-cli-notifications on (gdb) do-setup Setting up Inferior 2... [New inferior 2] Added inferior 2 on connection 1 (native) Breakpoint 2 at 0x1155: file file.c, line 3. Done 2022-02-07 Tankut Baris Aktemur gdb/cli: add a 'normal_stop' option to 'cli_suppress_notification' Extend the 'cli_suppress_notification' struct with a new field, 'normal_stop', that can be used for checking if printing normal stop events on the CLI should be suppressed. This patch only introduces the flag. The subsequent patch adds a user command to turn the flag off/on. 2022-02-07 Tankut Baris Aktemur gdb/cli: convert cli_suppress_notification from int to bool Convert the suppress_notification flag for the CLI from int to bool. 2022-02-07 Alan Modra Revert "elf: Remove the 1-page gap before the RELRO segment" This reverts commit 2f83249c13d86065b4c7cdb198ea871017b4bba1. PR ld/28743 * ldlang.c (lang_size_relro_segment_1): Revert 2022-01-10 changes. * testsuite/ld-i386/pr20830.d: Likewise. * testsuite/ld-s390/gotreloc_64-relro-1.dd: Likewise. * testsuite/ld-x86-64/pr14207.d: Likewise. * testsuite/ld-x86-64/pr18176.d: Likewise. * testsuite/ld-x86-64/pr20830a-now.d: Likewise. * testsuite/ld-x86-64/pr20830a.d: Likewise. * testsuite/ld-x86-64/pr20830b-now.d: Likewise. * testsuite/ld-x86-64/pr20830b.d: Likewise. * testsuite/ld-x86-64/pr21038a-now.d: Likewise. * testsuite/ld-x86-64/pr21038a.d: Likewise. * testsuite/ld-x86-64/pr21038b-now.d: Likewise. * testsuite/ld-x86-64/pr21038c-now.d: Likewise. * testsuite/ld-x86-64/pr21038c.d: Likewise. 2022-02-07 Alan Modra Revert "ld: Rewrite lang_size_relro_segment_1" This reverts commit c804c6f98d342c3d46f73d7a7ec6229d5ab1c9f3. PR ld/28743 PR ld/28819 * ldlang.c (lang_size_relro_segment_1): Revert 2022-01-14 change. * testsuite/ld-x86-64/pr28743-1.d: Likewise. * testsuite/ld-x86-64/pr28743-1.s: Likewise. * testsuite/ld-x86-64/x86-64.exp: Likewise. 2022-02-07 GDB Administrator Automatic date update in version.in 2022-02-06 Alan Modra A more elegant pr28827-1 testcase Use .irpc macros in pr28827-1.s * testsuite/ld-powerpc/pr28827-1.s: Make the testcase more elegant. Comment. 2022-02-06 Tom Tromey Merge do_val_print and common_val_print The only caller of do_val_print just does a small bit of work before the call. This patch merges the two functions, and removes an unnecessary local variable, making gdb a bit simpler. 2022-02-06 Simon Marchi gdb: remove SYMBOL_LINE macro Add a getter and a setter for a symbol's line. Remove the corresponding macro and adjust all callers. Change-Id: I229f2b8fcf938c07975f641361313a8761fad9a5 2022-02-06 Simon Marchi gdb: remove SYMBOL_TYPE macro Add a getter and a setter for a symbol's type. Remove the corresponding macro and adjust all callers. Change-Id: Ie1a137744c5bfe1df4d4f9ae5541c5299577c8de 2022-02-06 Simon Marchi gdb: remote SYMBOL_IS_CPLUS_TEMPLATE_FUNCTION macro Add a getter for a whether a symbol is a C++ template function. Remove the corresponding macro and adjust all callers. Change-Id: I89abc2802a952b77b0e0eb73a25c2306cb8e8bcc 2022-02-06 Simon Marchi gdb: remove SYMBOL_INLINED macro Add a getter and a setter for whether a symbol is inlined. Remove the corresponding macro and adjust all callers. Change-Id: I934468da3b5a32dd6b161a6f252a6b1b94737279 2022-02-06 Simon Marchi gdb: remove SYMBOL_IS_ARGUMENT macro Add a getter and a setter for whether a symbol is an argument. Remove the corresponding macro and adjust all callers. Change-Id: I71b4f0465f3dfd2ed8b9e140bd3f7d5eb8d9ee81 2022-02-06 Simon Marchi gdb: remove SYMBOL_OBJFILE_OWNED macro Add a getter and a setter for whether a symbol is objfile owned. Remove the corresponding macro and adjust all callers. Change-Id: Ib7ef3718d65553ae924ca04c3fd478b0f4f3147c 2022-02-06 Simon Marchi gdb: remove SYMBOL_DOMAIN macro Add a getter and a setter for a symbol's domain. Remove the corresponding macro and adjust all callers. Change-Id: I54465b50ac89739c663859a726aef8cdc6e4b8f3 2022-02-06 Simon Marchi gdb: remove SYMBOL_CLASS macro, add getter Change-Id: I83211d5a47efc0564386e5b5ea4a29c00b1fd46a 2022-02-06 Simon Marchi gdb: remove SYMBOL_IMPL macro, add method Add a getter for a symbol's "impl". Remove the corresponding macro and adjust all callers. Change-Id: Ibe26ed442f0f99a0f5cddafca30bd96ec7fb9fa8 2022-02-06 Simon Marchi gdb: remove SYMBOL_ACLASS_INDEX macro, add getter/setter Add a getter and a setter for a symbol's aclass index. Remove the corresponding macro and adjust all callers. Change-Id: Ie8c8d732624cfadb714aba5ddafa3d29409b3d39 2022-02-06 Simon Marchi gdb: remove SYMBOL_MATCHES_SEARCH_NAME It seems like this macro is not needed at all anymore, it just wraps the function of the same name with the same arguments. Change-Id: I3c342ac8d89c27af5aee1a819dc32cc6396fd41b 2022-02-06 Simon Marchi gdb: remove SYMTAB_DIRNAME macro Remove the macro, replace with an equivalent method. Change-Id: I46ec36b91bb734331138eb9cd086b2db01635aed 2022-02-06 Simon Marchi gdb: remove SYMTAB_PSPACE macro Remove the macro, replace with an equivalent method. Change-Id: Icccc20e7e8ae03ac4dac1c7514c25a12a9a0ac69 2022-02-06 Simon Marchi gdb: remove SYMTAB_OBJFILE macro Remove the macro, replace with an equivalent method. Change-Id: I8f9ecd290ad28502e53c1ceca5006ba78bf042eb 2022-02-06 Simon Marchi gdb: remove SYMTAB_BLOCKVECTOR macro Remove the macro, replace with an equivalent method. Change-Id: Id6fe2a79c04bcd6c69ccaefb7a69bc06a476288c 2022-02-06 Simon Marchi gdb: remove SYMTAB_LANGUAGE macro, add getter/setter Add a getter and a setter for a symtab's language. Remove the corresponding macro and adjust all callers. Change-Id: I9f4d840b11c19f80f39bac1bce020fdd1739e11f 2022-02-06 Simon Marchi gdb: remove SYMTAB_LINETABLE macro, add getter/setter Add a getter and a setter for a symtab's linetable. Remove the corresponding macro and adjust all callers. Change-Id: I159183fc0ccd8e18ab937b3c2f09ef2244ec6e9c 2022-02-06 Simon Marchi gdb: remove SYMTAB_COMPUNIT macro, add getter/setter Add a getter and a setter for a symtab's compunit_symtab. Remove the corresponding macro and adjust all callers. For brevity, I chose the name "compunit" instead of "compunit_symtab" the the field, getter and setter names. Since we are already in symtab context, the _symtab suffix seems redundant. Change-Id: I4b9b731c96e3594f7733e75af1e3d01bc0e4fe92 2022-02-06 Simon Marchi gdb: remove COMPUNIT_MACRO_TABLE macro, add getter/setter Add a getter and a setter for a compunit_symtab's macro table. Remove the corresponding macro and adjust all callers. Change-Id: I00615ea72d5ac43d9a865e941cb2de0a979c173a 2022-02-06 Simon Marchi gdb: remove COMPUNIT_EPILOGUE_UNWIND_VALID macro, add getter/setter Add a getter and a setter for a compunit_symtab's epilogue unwind valid flag. Remove the corresponding macro and adjust all callers. Change-Id: If3b68629d987767da9be7041a95d96dc34367a9a 2022-02-06 Simon Marchi gdb: remove COMPUNIT_LOCATIONS_VALID macro, add getter/setter Add a getter and a setter for a compunit_symtab's locations valid flag. Remove the corresponding macro and adjust all callers. Change-Id: I3e3cfba926ce62993d5b61814331bb3244afad01 2022-02-06 Simon Marchi gdb: remove COMPUNIT_BLOCK_LINE_SECTION macro, add getter/setter Add a getter and a setter for a compunit_symtab's block line section. Remove the corresponding macro and adjust all callers. Change-Id: I3eb1a323388ad55eae8bfa45f5bc4a08dc3df455 2022-02-06 Simon Marchi gdb: remove COMPUNIT_BLOCKVECTOR macro, add getter/setter Add a getter and a setter for a compunit_symtab's blockvector. Remove the corresponding macro and adjust all callers. Change-Id: I99484c6619dcbbea7c5d89c72aa660316ca62f64 2022-02-06 Simon Marchi gdb: remove COMPUNIT_DIRNAME macro, add getter/setter Add a getter and a setter for a compunit_symtab's dirname. Remove the corresponding macro and adjust all callers. Change-Id: If2f39b295fd26822586485e04a8b8b5aa5cc9b2e 2022-02-06 Simon Marchi gdb: remove COMPUNIT_PRODUCER macro, add getter/setter Add a getter and a setter for a compunit_symtab's producer. Remove the corresponding macro and adjust all callers. Change-Id: Ia1d6d8a0e247a08a21af23819d71e49b37d8931b 2022-02-06 Simon Marchi gdb: remove COMPUNIT_DEBUGFORMAT macro, add getter/setter Add a getter and a setter for a compunit_symtab's debugformat. Remove the corresponding macro and adjust all callers. Change-Id: I1667b02d5322346f8e23abd9f8a584afbcd75975 2022-02-06 Simon Marchi gdb: remove COMPUNIT_FILETABS macro I think that most remaining uses of COMPUNIT_FILETABS intend to get the primary filetab of the compunit_symtab specifically (and not to iterate over all filetabs, for example, those cases would use compunit_filetabs, which has been converted to compunit_symtab::filetabs), so replace mosts uses with compunit_symtab::primary_filetab. In jit.c, function finalize_symtab, we can save the symtab object returned by allocate_symtab and use it, it makes things simpler. Change-Id: I4e51d6d4b40759de8768b61292e5e13c8eae2e38 2022-02-06 Simon Marchi gdb: move compunit_filetabs to compunit_symtab::filetabs Make compunit_filetabs, used to iterate a compunit_symtab's filetabs, a method of compunit_symtab. The name filetabs conflicts with the current name of the field. Rename the field to m_filetabs, since at this point nothing outside of compunit_symtab uses it, so we should treat it as private (even though it's not actually private). Rename the last_filetab field to m_last_filetab as well (it's only used on compunit_symtab::add_filetab). Adjust the COMPUNIT_FILETABS macro to keep its current behavior of returning the first filetab. Change-Id: I537b553a44451c52d24b18ee1bfa47e23747cfc3 2022-02-06 Simon Marchi gdb: add compunit_symtab::set_primary_filetab method Add a method to set the primary filetab of the CU. This is currently done in buildsym_compunit::end_symtab_with_blockvector. Change-Id: I16c51a6b90a4cb4c0c5f183b0f2e12bc64b6fd74 2022-02-06 Simon Marchi gdb: add compunit_symtab::add_filetab method Add a method to append a filetab/symtab to a compunit_symtab. There is a single place where this is done currently, in allocate_symtab. Change-Id: Ie86c6e34d175728173d1cffdce44acd6cff6c31d 2022-02-06 Simon Marchi gdb: rename compunit_primary_filetab to compunit_symtab::primary_filetab Make compunit_primary_filetab a method of compunit_symtab. Change-Id: Iee3c4f7e36d579bf763c5bba146e5e10d6766768 2022-02-06 Simon Marchi gdb: remove COMPUNIT_OBJFILE macro Remove the macro, update all users to use the getter directly. Change-Id: I3f0fd6f4455d1c4ebd5da73b561eb18a979ef1f6 2022-02-06 Simon Marchi gdb: add getter/setter for compunit_symtab::objfile Rename the field to m_objfile, and add a getter and a setter. Update all users. Change-Id: If7e2f763ee3e70570140d9af9261b1b056253317 2022-02-06 Tom Tromey Allow non-ASCII characters in Rust identifiers Rust 1.53 (quite a while ago now) ungated the support for non-ASCII identifiers. This didn't work in gdb. This is PR rust/20166. This patch fixes the problem by allowing non-ASCII characters to be considered as identifier components. It seemed simplest to just pass them through -- doing any extra checking didn't seem worthwhile. The new test also verifies that such characters are allowed in strings and character literals as well. The latter also required a bit of work in the lexer. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=20166 2022-02-06 Tom Tromey Fix Rust parser bug with function fields In Rust, 'obj.f()' is a method call -- but '(obj.f)()' is a call of a function-valued field 'f' in 'obj'. The Rust parser in gdb currently gets this wrong. This is PR rust/24082. The expression and Rust parser rewrites made this simple to fix -- simply wrapping a parenthesized expression in a new operation handles it. This patch has a slight hack because I didn't want to introduce a new exp_opcode enumeration constant just for this. IMO this doesn't matter, since we should work toward removing dependencies on these opcodes anyway; but let me know what you think of this. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=24082 2022-02-06 H.J. Lu ld: Add emultempl/emulation.em Add emultempl/emulation.em to define ld_${EMULATION_NAME}_emulation so that new emulation hooks can be added easily. * emultempl/aix.em (LDEMUL_AFTER_OPEN): New. (LDEMUL_SET_OUTPUT_ARCH): Likewise. (LDEMUL_CHOOSE_TARGET): Likewise. (LDEMUL_BEFORE_ALLOCATION): Likewise. (LDEMUL_CREATE_OUTPUT_SECTION_STATEMENTS): Likewise. (LDEMUL_OPEN_DYNAMIC_ARCHIVE): Likewise. (LDEMUL_PARSE_ARGS): Likewise. (LDEMUL_ADD_OPTIONS): Likewise. (LDEMUL_HANDLE_OPTION): Likewise. (LDEMUL_UNRECOGNIZED_FILE): Likewise. (LDEMUL_PRINT_SYMBOL): Likewise. (ld_${EMULATION_NAME}_emulation): Removed. Source ${srcdir}/emultempl/emulation.em. * emultempl/beos.em (gld_${EMULATION_NAME}_before_parse): Renamed to ... (gld${EMULATION_NAME}_before_parse): This. (gld_${EMULATION_NAME}_set_symbols): Renamed to ... (gld${EMULATION_NAME}_set_symbols): This. (gld_${EMULATION_NAME}_after_open): Renamed to ... (gld${EMULATION_NAME}_after_open): This. (gld_${EMULATION_NAME}_before_allocation): Renamed to ... (gld${EMULATION_NAME}_before_allocation): This. (gld_${EMULATION_NAME}_get_script): Renamed to ... (gld${EMULATION_NAME}_get_script): This. (LDEMUL_AFTER_OPEN): New. (LDEMUL_BEFORE_ALLOCATION): Likewise. (LDEMUL_PLACE_ORPHAN): Likewise. (LDEMUL_SET_SYMBOLS): Likewise. (LDEMUL_ADD_OPTIONS): Likewise. (LDEMUL_HANDLE_OPTION): Likewise. (ld_${EMULATION_NAME}_emulation): Removed. Source ${srcdir}/emultempl/emulation.em. * emultempl/elf.em (LDEMUL_AFTER_PARSE): New. (LDEMUL_AFTER_OPEN): Likewise. (LDEMUL_BEFORE_PLACE_ORPHANS): Likewise. (LDEMUL_AFTER_ALLOCATION): Likewise. (LDEMUL_SET_OUTPUT_ARCH): Likewise. (LDEMUL_BEFORE_ALLOCATION): Likewise. (LDEMUL_OPEN_DYNAMIC_ARCHIVE): Likewise. (LDEMUL_PLACE_ORPHAN): Likewise. (LDEMUL_ADD_OPTIONS): Likewise. (LDEMUL_HANDLE_OPTION): Likewise. (LDEMUL_LIST_OPTIONS): Likewise. (LDEMUL_UNRECOGNIZED_FILE): Likewise. (ld_${EMULATION_NAME}_emulation): Removed. Source ${srcdir}/emultempl/emulation.em. * emultempl/emulation.em: New file. * emultempl/generic.em (ld_${EMULATION_NAME}_emulation): Removed. Source ${srcdir}/emultempl/emulation.em. * emultempl/msp430.em (LDEMUL_AFTER_OPEN): New. (LDEMUL_AFTER_ALLOCATION): Likewise. (LDEMUL_PLACE_ORPHAN): Likewise. (LDEMUL_FINISH): Likewise. (LDEMUL_ADD_OPTIONS): Likewise. (LDEMUL_HANDLE_OPTION): Likewise. (LDEMUL_LIST_OPTIONS): Likewise. (ld_${EMULATION_NAME}_emulation): Removed. Source ${srcdir}/emultempl/emulation.em. * emultempl/pe.em (gld_${EMULATION_NAME}_before_parse): Renamed to ... (gld${EMULATION_NAME}_before_parse): This. (gld_${EMULATION_NAME}_list_options): Renamed to ... (gld${EMULATION_NAME}_list_options): This. (gld_${EMULATION_NAME}_set_symbols): Renamed to ... (gld${EMULATION_NAME}_set_symbols): This. (gld_${EMULATION_NAME}_after_parse): Renamed to ... (gld${EMULATION_NAME}_after_parse): This. (gld_${EMULATION_NAME}_after_open): Renamed to ... (gld${EMULATION_NAME}_after_open): This. (gld_${EMULATION_NAME}_before_allocation): Renamed to ... (gld${EMULATION_NAME}_before_allocation): This. (gld_${EMULATION_NAME}_unrecognized_file): Renamed to ... (gld${EMULATION_NAME}_unrecognized_file): This. (gld_${EMULATION_NAME}_recognized_file): Renamed to ... (gld${EMULATION_NAME}_recognized_file): This. (gld_${EMULATION_NAME}_finish): Renamed to ... (gld${EMULATION_NAME}_finish): This. (gld_${EMULATION_NAME}_place_orphan): Renamed to ... (gld${EMULATION_NAME}_place_orphan): This. (gld_${EMULATION_NAME}_open_dynamic_archive): Renamed to ... (gld${EMULATION_NAME}_open_dynamic_archive): This. (gld_${EMULATION_NAME}_find_potential_libraries): Renamed to ... (gld${EMULATION_NAME}_find_potential_libraries): This. (gld_${EMULATION_NAME}_get_script): Renamed to ... (gld${EMULATION_NAME}_get_script): This. (LDEMUL_AFTER_PARSE): New. (LDEMUL_AFTER_OPEN): Likewise. (LDEMUL_BEFORE_ALLOCATION): Likewise. (LDEMUL_FINISH=): Likewise. (LDEMUL_OPEN_DYNAMIC_ARCHIVE): Likewise. (LDEMUL_PLACE_ORPHAN): Likewise. (LDEMUL_SET_SYMBOLS): Likewise. (LDEMUL_ADD_OPTIONS): Likewise. (LDEMUL_HANDLE_OPTION): Likewise. (LDEMUL_UNRECOGNIZED_FILE): Likewise. (LDEMUL_LIST_OPTIONS): Likewise. (LDEMUL_RECOGNIZED_FILE): Likewise. (LDEMUL_FIND_POTENTIAL_LIBRARIES): Likewise. (ld_${EMULATION_NAME}_emulation): Removed. Source ${srcdir}/emultempl/emulation.em. * emultempl/pep.em (gld_${EMULATION_NAME}_before_parse): Renamed to ... (gld${EMULATION_NAME}_before_parse): This. (gld_${EMULATION_NAME}_list_options): Renamed to ... (gld${EMULATION_NAME}_list_options): This. (gld_${EMULATION_NAME}_set_symbols): Renamed to ... (gld${EMULATION_NAME}_set_symbols): This. (gld_${EMULATION_NAME}_after_parse): Renamed to ... (gld${EMULATION_NAME}_after_parse): This. (gld_${EMULATION_NAME}_after_open): Renamed to ... (gld${EMULATION_NAME}_after_open): This. (gld_${EMULATION_NAME}_before_allocation): Renamed to ... (gld${EMULATION_NAME}_before_allocation): This. (gld_${EMULATION_NAME}_unrecognized_file): Renamed to ... (gld${EMULATION_NAME}_unrecognized_file): This. (gld_${EMULATION_NAME}_recognized_file): Renamed to ... (gld${EMULATION_NAME}_recognized_file): This. (gld_${EMULATION_NAME}_finish): Renamed to ... (gld${EMULATION_NAME}_finish): This. (gld_${EMULATION_NAME}_place_orphan): Renamed to ... (gld${EMULATION_NAME}_place_orphan): This. (gld_${EMULATION_NAME}_open_dynamic_archive): Renamed to ... (gld${EMULATION_NAME}_open_dynamic_archive): This. (gld_${EMULATION_NAME}_find_potential_libraries): Renamed to ... (gld${EMULATION_NAME}_find_potential_libraries): This. (gld_${EMULATION_NAME}_get_script): Renamed to ... (gld${EMULATION_NAME}_get_script): This. (LDEMUL_AFTER_PARSE): New. (LDEMUL_AFTER_OPEN): Likewise. (LDEMUL_BEFORE_ALLOCATION): Likewise. (LDEMUL_FINISH=): Likewise. (LDEMUL_OPEN_DYNAMIC_ARCHIVE): Likewise. (LDEMUL_PLACE_ORPHAN): Likewise. (LDEMUL_SET_SYMBOLS): Likewise. (LDEMUL_ADD_OPTIONS): Likewise. (LDEMUL_HANDLE_OPTION): Likewise. (LDEMUL_UNRECOGNIZED_FILE): Likewise. (LDEMUL_LIST_OPTIONS): Likewise. (LDEMUL_RECOGNIZED_FILE): Likewise. (LDEMUL_FIND_POTENTIAL_LIBRARIES): Likewise. (ld_${EMULATION_NAME}_emulation): Removed. Source ${srcdir}/emultempl/emulation.em. * emultempl/ticoff.em (gld_${EMULATION_NAME}_list_options): Renamed to ... (gld${EMULATION_NAME}_list_options): This. (gld_${EMULATION_NAME}_before_parse): Renamed to ... (gld_${EMULATION_NAME}_get_script): Renamed to ... (gld${EMULATION_NAME}_get_script): This. (LDEMUL_ADD_OPTIONS): New. (LDEMUL_HANDLE_OPTION): Likewise. (LDEMUL_LIST_OPTIONS): Likewise. (ld_${EMULATION_NAME}_emulation): Removed. Source ${srcdir}/emultempl/emulation.em. * emultempl/vanilla.em (LDEMUL_BEFORE_PARSE): New. (LDEMUL_SET_OUTPUT_ARCH): Likewise. (LDEMUL_GET_SCRIPT): Likewise. (EMULATION_NAME): Likewise. (OUTPUT_FORMAT): Likewise. (ld_vanilla_emulation): Removed. Source ${srcdir}/emultempl/emulation.em. 2022-02-06 Andrew Burgess gdb/doc: update docs for 'info win' and 'winheight' commands This started by noticing that the docs for 'winheight' are out of date, the docs currently give a specific list of possible window names. However, now that windows can be implemented in Python, it is not possible to list all possible names. I now link the user to a mechanism by which they can discover the valid names for themselves at run time (by using 'info win'). That, and the fact that gdb provides tab-completion of the name at the command line, feels good enough. Finally, I noticed that the docs for 'win info' don't explicitly say that the name of the window is given in the output. This could probably have been inferred, but given I'm now linking to this as a mechanism to find the window name, I'd prefer to mention that the name can be found in the output. 2022-02-06 Andrew Burgess gdb/tui: add window width information to 'info win' output Now that we support horizontal window placement in the tui, it makes sense to have 'info win' include the width, as well as the height, of the currently visible windows. That's what this commit does. Example output is now: (gdb) info win Name Lines Columns Focus src 12 40 (has focus) asm 12 41 status 1 80 cmd 11 80 I've added a NEWS entry, but the documentation was already suitably vague, it just says that 'info win' displays the size of the visible windows, so I don't think anything needs to be added there. I've also added some tests, as far as I could find, the 'info win' command was previously untested. 2022-02-06 GDB Administrator Automatic date update in version.in 2022-02-05 H.J. Lu x86: Skip undefined symbol when finishing DT_RELR Don't abort for undefined symbol when finishing DT_RELR. Instead, skip undefined symbol. Undefined symbol will be reported by relocate_section. * elfxx-x86.c (elf_x86_size_or_finish_relative_reloc): Skip undefined symbol in finishing phase. 2022-02-05 Alan Modra Tweak assembler invocation for pr28827-1 test PR 28827 * testsuite/ld-powerpc/pr28827-1.d: Pass -a64 to gas. 2022-02-05 Alan Modra PR28827 testcase This testcase triggers a stub sizing error with the patches applied for PR28743 (commit 2f83249c13d8 and c804c6f98d34). PR 28827 * testsuite/ld-powerpc/pr28827-1.s, * testsuite/ld-powerpc/pr28827-1.d: New test. * testsuite/ld-powerpc/powerpc.exp: Run it. 2022-02-05 Alan Modra Enable "size" as a dumpprog in ld binutils/ * testsuite/lib/binutils-common.exp (run_dump_test): Reference global SIZE and SIZEFLAGS. ld/ * testsuite/config/default.exp: Define SIZE and SIZEFLAGS. 2022-02-05 Alan Modra Detect .eh_frame_hdr earlier for SIZEOF_HEADERS Current code detects the need for PT_GNU_EH_FRAME using a field set by _bfd_elf_discard_section_eh_frame_hdr, which is called fairly late in the linking process. Use the elf hash table eh_info instead, which is set up earlier by size_dynamic_sections. * elf-bfd.h (struct output_elf_obj_tdata): Delete eh_frame_hdr. (elf_eh_frame_hdr): Don't define. (_bfd_elf_discard_section_eh_frame_hdr): Update prototype. * elf-eh-frame.c (_bfd_elf_discard_section_eh_frame_hdr): Delete abfd parameter. Don't set elf_eh_frame_hdr. * elf.c (elf_eh_frame_hdr): New function. (get_program_header_size): Adjust elf_eh_frame_hdr call. (_bfd_elf_map_sections_to_segments): Likewise. 2022-02-05 Faraz Shahbazker sim: mips: Add simulator support for mips32r6/mips64r6 2022-02-01 Ali Lown Andrew Bennett Dragan Mladjenovic Faraz Shahbazker sim/common/ChangeLog: * sim-bits.h (EXTEND9, EXTEND18 ,EXTEND19, EXTEND21, EXTEND26): New macros. sim/mips/ChangeLog: * Makefile.in (IGEN_INCLUDE): Add mips3264r6.igen. * configure: Regenerate. * configure.ac: Support mipsisa32r6 and mipsisa64r6. (sim_engine_run): Pick simulator model from processor specified in e_flags. * cp1.c (value_fpr): Handle fmt_dc32. (fp_unary, fp_binary): Zero initialize locals. (update_fcsr, fp_classify, fp_rint, fp_r6_cmp, inner_fmac, fp_fmac, fp_min, fp_max, fp_mina, fp_maxa, fp_fmadd, fp_fmsub): New functions. (sim_fpu_class_mips_mapping): New. * cp1.h (fcsr_ABS2008_mask, fcsr_ABS2008_shift): New define. * interp.c (MIPSR6_P): New. (load_word): Allow unaligned memory access for MIPSR6. * micromips.igen (sc, scd): Adapt to new do_sc* helper signature. * mips.igen: Add *r6 models. (signal_if_cti, forbiddenslot32): New helpers. (delayslot32): Use signal_if_cti. (do_sc, do_scd); Add store_ll_bit parameter. (sc, scd): Adapt to previous change. (nal, beq, bal): New definitions for *r6. (sll): Split nop and ssnop cases into ... (nop, ssnop): New definitions. (loadstore_ea): Use the 32-bit compatibility adressing. (cache): Split logic into ... (do_cache): New helper. (check_fpu): Select IEEE 754-2008 mode for R6. (not_word_value, unpredictable, check_mt_hilo, check_mf_hilo, check_multi_hilo, check_div_hilo, check_u64, do_dmfc1b, add, li, addu, and, andi, bgez, bgtz, blez, bltz, bne, break, dadd, daddiu, daddu, dror, dror32, drorv, dsll, dsll32, dsllv, dsra, dsra32, dsrav, dsrl, dsrl32, dsub, dsubu, j, jal, jalr, jalr.hb, lb, lbu, ld, lh, lhu, lui, lw, lwu, nor, or, ori, ror, rorv, sb, sd, sh, sll, sllv, slt, slti, sltiu, sltu, sra, srav, srl, srlv, sub, subu, sw, sync, syscall, teq, tge, tgeu, tlt, tltu, tne, xor, xori, check_fmt_p, do_load_double, do_store_double, abs.FMT, add.FMT, ceil.l.FMT, ceil.w.FMT, cfc1, ctc1, cvt.d.FMT, cvt.l.FMT, cvt.w.FMT, div.FMT, dfmc1, dmtc1, floor.l.FMT, floor.w.FMT, ldc1, lwc1, mfc1, mov.FMT, mtc1, mul.FMT, recip.FMT, round.l.FMT, round.w.FMT, rsqrt.FMT, sdc1, sqrt.FMT, sub.FMT, swc1, trunc.l.FMT, trunc.w.FMT, bc0f, bc0fl, bc0t, bc0tl, dmfc0, dmtc0, eret, mfc0, mtc0, cop, tlbp, tlbr, tlbwi, tlbwr): Enable on *r6 models. * mips3264r2.igen (dext, dextm, dextu, di, dins, dinsm, dinsu, dsbh, dshd, ei, ext, mfhc1, mthc1, ins, seb, seh, synci, rdhwr, wsbh): Likewise. * mips3264r6.igen: New file. * sim-main.h (FP_formats): Add fmt_dc32. (FORBIDDEN_SLOT): New macros. (simFORBIDDENSLOT, FP_R6CMP_*, FP_R6CLASS_*): New defines. (fp_r6_cmp, fp_classify, fp_rint, fp_min, fp_max, fp_mina, fp_maxa, fp_fmadd, fp_fmsub): New declarations. (R6Compare, Classify, RoundToIntegralExact, Min, Max, MinA, MaxA, FusedMultiplyAdd, FusedMultiplySub): New macros. Wrapping previous declarations. sim/testsuite/mips/ChangeLog: * basic.exp: Add r6-*.s tests. (run_r6_removed_test): New function. (run_endian_tests): New function. * hilo-hazard-3.s: Skip for mips*r6. * r2-fpu.s: New test. * r6-64.s: New test. * r6-branch.s: New test. * r6-forbidden.s: New test. * r6-fpu.s: New test. * r6-llsc-dp.s: New test. * r6-llsc-wp.s: New test. * r6-removed.csv: New test. * r6-removed.s: New test. * r6.s: New test. * utils-r6.inc: New inc. 2022-02-05 Faraz Shahbazker sim: Add partial support for IEEE 754-2008 2022-02-01 Faraz Shahbazker sim/common/ChangeLog: * sim-fpu.c (sim_fpu_minmax_nan): New. (sim_fpu_max): Add variant behaviour for IEEE 754-2008. (sim_fpu_min): Likewise. (sim_fpu_is_un, sim_fpu_is_or): New. (sim_fpu_un, sim_fpu_or): New. (sim_fpu_is_ieee754_2008, sim_fpu_is_ieee754_1985): New. (sim_fpu_set_mode): New. (sim_fpu_classify): New. * sim-fpu.h (sim_fpu_minmax_nan): New declaration. (sim_fpu_un, sim_fpu_or): New declarations. (sim_fpu_is_un, sim_fpu_is_or): New declarations. (sim_fpu_mode): New enum. [sim_fpu_state](current_mode): New field. (sim_fpu_current_mode): New define. (sim_fpu_is_ieee754_2008): New declaration. (sim_fpu_is_ieee754_1985): New declaration. (sim_fpu_set_mode): New declaration. (sim_fpu_classify): New declaration. 2022-02-05 Faraz Shahbazker sim: Factor out NaN handling in floating point operations 2022-02-01 Faraz Shahbazker sim/common/ChangeLog: * sim-fpu.c (sim_fpu_op_nan): New. (sim_fpu_add): Factor out NaN operand handling with a call to sim_fpu_op_nan. (sim_fpu_sub, sim_fpu_mul, sim_fpu_div): Likewise. (sim_fpu_rem, sim_fpu_max, sim_fpu_min): Likewise. * sim-fpu.h (sim_fpu_op_nan): New declaration. 2022-02-05 Faraz Shahbazker sim: Allow toggling of quiet NaN-bit semantics IEEE754-1985 specifies the top bit of the mantissa as an indicator of signalling vs. quiet NaN, but does not define the precise semantics. Most architectures treat this bit as indicating quiet NaN, but legacy (pre-R6) MIPS goes the other way and treats it as signalling NaN. This used to be controlled by a macro that was only defined for MIPS. This patch replaces the macro with a variable to track the current semantics of the NaN bit and allows differentiation between older (pre-R6) and and newer MIPS cores. 2022-02-01 Faraz Shahbazker sim/common/ChangeLog: * sim-fpu.c (_sim_fpu): New. (pack_fpu, unpack_fpu): Allow reversal of quiet NaN semantics. * sim-fpu.h (sim_fpu_state): New struct. (_sim_fpu): New extern. (sim_fpu_quiet_nan_inverted): New define. sim/mips/ChangeLog: * cp1.h (fcsr_NAN2008_mask, fcsr_NAN2008_shift): New. * mips.igen (check_fpu): Select default quiet NaN mode for legacy MIPS. * sim-main.h (SIM_QUIET_NAN_NEGATED): Remove. 2022-02-05 GDB Administrator Automatic date update in version.in 2022-02-04 H.J. Lu ld: Remove emultempl/armcoff.em Remove emultempl/armcoff.em which has been unused after commit 2ac93be706418f3b2aebeb22159a328023faed52 Author: Alan Modra Date: Mon Apr 16 20:33:36 2018 +0930 Remove arm-aout and arm-coff support This also removes arm-netbsd (not arm-netbsdelf!), arm-openbsd, and arm-riscix. Those targets weren't on the obsolete list but they are all aout, and it doesn't make all that much sense to remove arm-aout without removing them too. * emultempl/armcoff.em: Removed. 2022-02-04 Simon Marchi gdb: include jit_code_entry::symfile_addr value in names of objfiles created by jit reader API This commit includes the JIT object's symfile address in the names of objfiles created by JIT reader API (e.g., << JIT compiled code at 0x7ffd8a0c77a0 >>). This allows one to at least differentiate one from another. The address is the one that the debugged program has put in jit_code_entry::symfile_addr, and that the JIT reader's read function receives. As we can see in gdb.base/jit-reader-host.c and gdb.base/jit-reader.c, that may not be the actual value of where the JIT-ed code is. But it is a value chosen by the author of the JIT engine and the JIT reader, so including this value in the objfile name may help them correlate the JIT objfiles created by with their logs / data structures. To access this field, we need to pass down a reference to the jit_code_entry. So make jit_dbg_reader_data a structure (instead of an alias for a CORE_ADDR) that includes the address of the code entry in the inferior's address space (the previous meaning of jit_dbg_reader_data) plus a reference to the jit_code_entry as read into GDB's address space. And while at it, pass down the gdbarch, so that we don't have to call target_gdbarch. Co-Authored-By: Jan Vrany Change-Id: Ib26c4d1bd8de503d651aff89ad2e500cb312afa5 2022-02-04 Tom Tromey Improve Ada unchecked union type printing Currently, "ptype" of an Ada unchecked union may show a compiler-generated wrapper structure in its output. It's more Ada-like to elide this structure, which is what this patch implements. It turned out to be simplest to reuse a part of print_variant_clauses for this. As this is Ada-specific, and Joel already reviewed it internally, I am going to check it in. 2022-02-04 Tom Tromey Remove host_hex_value I noticed that host_hex_value is redundant, because gdbsupport already has fromhex. This patch removes the former in favor of the latter. Regression tested on x86-64 Fedora 34. 2022-02-04 Andi Kleen Support symbol+offset lookup in addr2line The Linux kernel usually ouputs symbol+offset instead of plain code addresses these days, to avoid leaking ASLR secrets and to handle dynamically loaded modules. Converting those with addr2line is somewhat involved: it requires looking up the symbol first using nm and then manually compute the offset, and then pass it to addr2line. This patch implements the necessary steps directly in addr2line, by looking up the symbol (with demangling if needed) and computing the offset. It's possible that a symbol is ambigious with a hex number. In this case it uses the symbol lookup if the string contains a +. When it isn't ambigious the + is optional. 2022-02-04 GDB Administrator Automatic date update in version.in 2022-02-03 Cary Coutant Rename EM_56800V4 to EM_56800EF. include/elf: * common.h: Rename EM_56800V4 to EM_56800EF. 2022-02-03 H.J. Lu x86: Update X86_64_GOT_TYPE_P to cover more GOT relocations Add R_X86_64_GOT32, R_X86_64_GOT64, R_X86_64_GOTPCREL64 and R_X86_64_GOTPLT64 to X86_64_GOT_TYPE_P to cover more GOT relocations. PR ld/28858 * elfxx-x86.h (X86_64_GOT_TYPE_P): Add R_X86_64_GOT32, R_X86_64_GOT64, R_X86_64_GOTPCREL64 and R_X86_64_GOTPLT64. 2022-02-03 Cary Coutant Add new e_machine values. include/elf: * common.h: Add EM_U16_U8CORE, EM_TACHYUM, EM_56800V4. 2022-02-03 Tankut Baris Aktemur testsuite: fix failure in gdb.threads/killed-outside.exp Starting with commit commit 1da5d0e664e362857153af8682321a89ebafb7f6 Date: Tue Jan 4 08:02:24 2022 -0700 Change how Python architecture and language are handled we see a failure in gdb.threads/killed-outside.exp: ... Executing on target: kill -9 16622 (timeout = 300) builtin_spawn -ignore SIGHUP kill -9 16622 continue Continuing. Couldn't get registers: No such process. (gdb) [Thread 0x7ffff77c2700 (LWP 16626) exited] Program terminated with signal SIGKILL, Killed. The program no longer exists. FAIL: gdb.threads/killed-outside.exp: prompt after first continue (timeout) This is not a regression but a failure due to a change in GDB's output. Prior to the aforementioned commit, GDB has been printing the "Couldn't get registers: No such process." message twice. The second one came from (top-gdb) bt #0 amd64_linux_nat_target::fetch_registers (this=0x555557f31440 , regcache=0x555558805ce0, regnum=16) at /gdb-up/gdb/amd64-linux-nat.c:225 #1 0x000055555640ac5f in target_ops::fetch_registers (this=0x555557d636d0 , arg0=0x555558805ce0, arg1=16) at /gdb-up/gdb/target-delegates.c:502 #2 0x000055555641a647 in target_fetch_registers (regcache=0x555558805ce0, regno=16) at /gdb-up/gdb/target.c:3945 #3 0x0000555556278e68 in regcache::raw_update (this=0x555558805ce0, regnum=16) at /gdb-up/gdb/regcache.c:587 #4 0x0000555556278f14 in readable_regcache::raw_read (this=0x555558805ce0, regnum=16, buf=0x555558881950 "") at /gdb-up/gdb/regcache.c:601 #5 0x00005555562792aa in readable_regcache::cooked_read (this=0x555558805ce0, regnum=16, buf=0x555558881950 "") at /gdb-up/gdb/regcache.c:690 #6 0x000055555627965e in readable_regcache::cooked_read_value (this=0x555558805ce0, regnum=16) at /gdb-up/gdb/regcache.c:748 #7 0x0000555556352a37 in sentinel_frame_prev_register (this_frame=0x555558181090, this_prologue_cache=0x5555581810a8, regnum=16) at /gdb-up/gdb/sentinel-frame.c:53 #8 0x0000555555fa4773 in frame_unwind_register_value (next_frame=0x555558181090, regnum=16) at /gdb-up/gdb/frame.c:1235 #9 0x0000555555fa420d in frame_register_unwind (next_frame=0x555558181090, regnum=16, optimizedp=0x7fffffffd570, unavailablep=0x7fffffffd574, lvalp=0x7fffffffd57c, addrp=0x7fffffffd580, realnump=0x7fffffffd578, bufferp=0x7fffffffd5b0 "") at /gdb-up/gdb/frame.c:1143 #10 0x0000555555fa455f in frame_unwind_register (next_frame=0x555558181090, regnum=16, buf=0x7fffffffd5b0 "") at /gdb-up/gdb/frame.c:1199 #11 0x00005555560178e2 in i386_unwind_pc (gdbarch=0x5555587c4a70, next_frame=0x555558181090) at /gdb-up/gdb/i386-tdep.c:1972 #12 0x0000555555cd2b9d in gdbarch_unwind_pc (gdbarch=0x5555587c4a70, next_frame=0x555558181090) at /gdb-up/gdb/gdbarch.c:3007 #13 0x0000555555fa3a5b in frame_unwind_pc (this_frame=0x555558181090) at /gdb-up/gdb/frame.c:948 #14 0x0000555555fa7621 in get_frame_pc (frame=0x555558181160) at /gdb-up/gdb/frame.c:2572 #15 0x0000555555fa7706 in get_frame_address_in_block (this_frame=0x555558181160) at /gdb-up/gdb/frame.c:2602 #16 0x0000555555fa77d0 in get_frame_address_in_block_if_available (this_frame=0x555558181160, pc=0x7fffffffd708) at /gdb-up/gdb/frame.c:2665 #17 0x0000555555fa5f8d in select_frame (fi=0x555558181160) at /gdb-up/gdb/frame.c:1890 #18 0x0000555555fa5bab in lookup_selected_frame (a_frame_id=..., frame_level=-1) at /gdb-up/gdb/frame.c:1720 #19 0x0000555555fa5e47 in get_selected_frame (message=0x0) at /gdb-up/gdb/frame.c:1810 #20 0x0000555555cc9c6e in get_current_arch () at /gdb-up/gdb/arch-utils.c:848 #21 0x000055555625b239 in gdbpy_before_prompt_hook (extlang=0x555557451f20 , current_gdb_prompt=0x555557f4d890 "(gdb) ") at /gdb-up/gdb/python/python.c:1063 #22 0x0000555555f7cfbb in ext_lang_before_prompt (current_gdb_prompt=0x555557f4d890 "(gdb) ") at /gdb-up/gdb/extension.c:922 #23 0x0000555555f7d442 in std::_Function_handler::_M_invoke(std::_Any_data const&, char const*&&) (__functor=..., __args#0=@0x7fffffffd900: 0x555557f4d890 "(gdb) ") at /usr/include/c++/7/bits/std_function.h:316 #24 0x0000555555f752dd in std::function::operator()(char const*) const (this=0x55555817d838, __args#0=0x555557f4d890 "(gdb) ") at /usr/include/c++/7/bits/std_function.h:706 #25 0x0000555555f75100 in gdb::observers::observable::notify (this=0x555557f49060 , args#0=0x555557f4d890 "(gdb) ") at /gdb-up/gdb/../gdbsupport/observable.h:150 #26 0x0000555555f736dc in top_level_prompt () at /gdb-up/gdb/event-top.c:444 #27 0x0000555555f735ba in display_gdb_prompt (new_prompt=0x0) at /gdb-up/gdb/event-top.c:411 #28 0x00005555564611a7 in tui_on_command_error () at /gdb-up/gdb/tui/tui-interp.c:205 #29 0x0000555555c2173f in std::_Function_handler::_M_invoke(std::_Any_data const&) (__functor=...) at /usr/include/c++/7/bits/std_function.h:316 #30 0x0000555555e10c20 in std::function::operator()() const (this=0x5555580f9028) at /usr/include/c++/7/bits/std_function.h:706 #31 0x0000555555e10973 in gdb::observers::observable<>::notify() const (this=0x555557f48d20 ) at /gdb-up/gdb/../gdbsupport/observable.h:150 #32 0x00005555560e9b3f in start_event_loop () at /gdb-up/gdb/main.c:438 #33 0x00005555560e9bcc in captured_command_loop () at /gdb-up/gdb/main.c:481 #34 0x00005555560eb616 in captured_main (data=0x7fffffffddd0) at /gdb-up/gdb/main.c:1348 #35 0x00005555560eb67c in gdb_main (args=0x7fffffffddd0) at /gdb-up/gdb/main.c:1363 #36 0x0000555555c1b6b3 in main (argc=12, argv=0x7fffffffded8) at /gdb-up/gdb/gdb.c:32 Commit 1da5d0e664 eliminated the call to 'get_current_arch' in 'gdbpy_before_prompt_hook'. Hence, the second instance of "Couldn't get registers: No such process." does not appear anymore. Fix the failure by updating the regular expression in the test. 2022-02-03 Alan Modra PowerPC64 treatment of absolute symbols Supporting -static-pie on PowerPC64 requires the linker to properly treat SHN_ABS symbols for cases like glibc's _nl_current_LC_CTYPE_used absolute symbol. I've been slow to fix the linker on powerpc because there is some chance that this will break some shared libraries or PIEs. bfd/ * elf64-ppc.c (ppc64_elf_check_relocs): Consolidate local sym handling code. Don't count dyn relocs against non-dynamic absolute symbols. (dec_dynrel_count): Adjust to suit. (ppc64_elf_edit_toc): Don't remove entries for absolute symbols when pic. (allocate_got): Don't allocate space for got relocs against non-dynamic absolute syms. (ppc64_elf_layout_multitoc): Likewise. (got_and_plt_relr): Likewise. (ppc64_elf_size_dynamic_sections): Likewise for local got. (got_and_plt_relr_for_local_syms): Likewise. (ppc64_elf_size_stubs): Don't allocate space for relr either. (ppc64_elf_relocate_section): Don't write relocs against non-dynamic absolute symbols. Don't optimise got and toc code sequences loading absolute symbol entries. ld/ * testsuite/ld-powerpc/abs-reloc.s, * testsuite/ld-powerpc/abs-static.d, * testsuite/ld-powerpc/abs-static.r, * testsuite/ld-powerpc/abs-pie.d, * testsuite/ld-powerpc/abs-pie.r, * testsuite/ld-powerpc/abs-shared.d, * testsuite/ld-powerpc/abs-shared.r, * testsuite/ld-powerpc/abs-pie-relr.d, * testsuite/ld-powerpc/abs-pie-relr.r, * testsuite/ld-powerpc/abs-shared-relr.d, * testsuite/ld-powerpc/abs-shared-relr.r: New tests. * testsuite/ld-powerpc/powerpc.exp: Run them. 2022-02-03 GDB Administrator Automatic date update in version.in 2022-02-02 Nick Clifton Stop the BFD library complaining about compressed dwarf debug string sections being too big. PR 28834 * dwarf2.c (read_section): Change the heuristic that checks for overlarge dwarf debug info sections. 2022-02-02 Andrew Burgess gdb: fix formatting for help set/show extended-prompt The formatting of the help text for 'help set extended-prompt' and 'help show extended-prompt' is a little off. Here's the offending snippet: Substitutions are applied to VALUE to compute the real prompt. The currently defined substitutions are: \[ Begins a sequence of non-printing characters. \\ A backslash. \] Ends a sequence of non-printing characters. \e The ESC character. Notice that the line for '\[' is indented more that the others. Turns out this is due to how we build this help text, something which is done in Python. We extended a classes __doc__ string with some dynamically generated text. The classes doc string looks like this: """Set the extended prompt. Usage: set extended-prompt VALUE Substitutions are applied to VALUE to compute the real prompt. The currently defined substitutions are: """ Notice the closing """ are in a line of their own, and include some white space just before. It's this extra white space that's causing the problem. Fix the formatting issue by moving the """ to the end of the previous line. I then add the extra newline in at the point where the doc string is merged with the dynamically generated text. Now everything lines up correctly. 2022-02-02 Andrew Burgess gdb: test to check one aspect of the linespec parsing code While working on the fix for PR cli/28665 (see previous couple of commits), I was playing with making a change in the linespec parsing code. Specifically, I was thinking about whether the spec_string for LINESPEC_LOCATION locations should ever be nullptr. I made a change to prevent the spec_string from ever being nullptr, tested gdb, and saw no regressions. However, as part of this work I was reviewing how the breakpoint code handles this case (spec_string being nullptr), and spotted that in parse_breakpoint_sals the nullptr case is specifically handled, so changing this should have caused a regression. But I didn't see one. So, this commit adds a comment in location.c mentioning that the nullptr case is (a) not an oversight, and (b) is required. Then I add a new test to gdb.base/break.exp that ensures a change in this area will cause a regression. This test passes on current gdb, but with my modified (and broken) gdb, the test would fail. 2022-02-02 Andrew Burgess gdb: handle calls to edit command passing only a linespec condition While working on the previous commit to fix PR cli/28665, I noticed that the 'edit' command would suffer from the same problem. That is, something like: (gdb) edit task 123 would cause GDB to break. For a full explanation of what's going on here, see the commit message for the previous commit. As with the previous commit, this issue can be prevented by detecting, and throwing, a junk at the end of the line error earlier, before calling decode_line_1. So, that's what this commit does. I've also added some tests for this issue. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28665 2022-02-02 Andrew Burgess gdb: handle calls to list command passing only a linespec condition In PR cli/28665, it was reported that GDB would crash when given a command like: (gdb) list task 123 The problem here is that in cli/cli-cmd.c:list_command, the string 'task 123' is passed to string_to_event_location in find a location specification. However, this location parsing understands about breakpoint conditions, and so, will stop parsing when it sees something that looks like a condition, in this case, the 'task 123' looks like a breakpoint condition. As a result, the location we get back from string_to_event_location has no actual location specification attached to it. The actual call path is: list_command string_to_event_location string_to_event_location_basic new_linespec_location In new_linespec_location we call linespec_lex_to_end, which looks at 'task 123' and decides that there's nothing there that describes a location. As such, in new_linespec_location, the spec_string field of the location is left as nullptr. Back in list_command we then call decode_line_1, which calls event_location_to_sals, which calls parse_linespec, which takes the spec_string we found earlier, and tries to converts this into a list of sals. However, parse_linespec is not intended to be passed a nullptr, for example, calling is_ada_operator will try to access through the nullptr, causing undefined behaviour. But there are other cases within parse_linespec which don't expect to see a nullptr. When looking at how to fix this issue, I first considered having linespec_lex_to_end detect the problem. That function understands when the first thing in the linespec is a condition keyword, and so, could throw an error saying something like: "no linespec before condition keyword", however, this is not going to work, at least, not without additional changes to GDB, it is valid to place a breakpoint like: (gdb) break task 123 This will place a breakpoint at the current location with the condition 'task 123', and changing linespec_lex_to_end breaks this behaviour. So, next, I considered what would happen if I added a condition to an otherwise valid list command, this is what I see: (gdb) list file.c:1 task 123 Junk at end of line specification. (gdb) So, then I wondered, could we just pull the "Junk" detection forward, so that we throw the error earlier, before we call decode_line_1? It turns out that yes we can. Well, sort of. It is simpler, I think, to add a separate check into the list_command function, after calling string_to_event_location, but before calling decode_line_1. We know when we call string_to_event_location that the string in question is not empty, so, after calling string_to_event_location, if non of the string has been consumed, then the content of the string must be junk - it clearly doesn't look like a location specification. I've reused the same "Junk at end of line specification." error for consistency, and added a few tests to cover this issue. While the first version of this patch was on the mailing list, a second bug PR gdb/28797 was raised. This was for a very similar issue, but this time the problem command was: (gdb) list ,, Here the list command understands about the first comma, list can have two arguments separated by a comma, and the first argument can be missing. So we end up trying to parse the second command "," as a linespec. However, in linespec_lex_to_end, we will stop parsing a linespec at a comma, so, in the above case we end up with an empty linespec (between the two commas), and, like above, this results in the spec_string being nullptr. As with the previous case, I've resolved this issue by adding an extra check for junk at the end of the line - after parsing (or failing to parse) the nothing between the two commas, we still have the "," left at the end of the list command line - when we see this we can throw the same "junk at the end of the line" error, and all is good. I've added tests for this case too. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28665 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28797 2022-02-02 Andrew Burgess gdb/testsuite: move linespec test into gdb.linespec/ directory The gdb.base/linespecs.exp test should really live in the gdb.linespec directory, so lets move it there. As we already have gdb.linespec/linespec.exp, I've renamed the test to gdb.linespec/errors.exp, as this better reflects what the test is actually checking. Finally, the test script doesn't have its own source file, it was reusing a random other source file, gdb.base/memattr.c. Now the tests script is in gdb.linespec/, I've updated the test to use a different source file from that directory. 2022-02-02 Andrew Burgess gdb: add empty string check in parse_linespec If parse_linespec (linespec.c) is passed ARG as an empty string then we end up calling `strchr (linespec_quote_characters, '\0')`, which will return a pointer to the '\0' at the end of linespec_quote_characters. This then results in GDB calling skip_quote_char with `ARG + 1`, which is undefined behaviour (as ARG only contained a single character, the '\0'). Fix this by checking for the first character of ARG being '\0' before the call to strchr. I have additionally added an assertion that ARG can't itself be nullptr, as calling is_ada_operator with nullptr can end up calling 'startswith' on the nullptr, which is undefined behaviour. Finally, I moved the declaration of TOKEN into the body of parse_linespec, to where TOKEN is defined. This patch came about while I was working on fixes for PR cli/28665 and PR gdb/28797. The actual fixes for these two issues will be in a later commit in this series, but, with this patch in place, both of the above bugs would hit the new assertion rather than accessing invalid memory and crashing. The '\0' check is not currently ever hit, but just makes the code a little safer. Because this patch only changes the nature of the failure for the above two bugs, there's no tests here. A later commit will fix the above two issues, at which point I'll add some tests. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28665 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28797 2022-02-02 Andrew Burgess gdb: update the comment on string_to_event_location The comment on string_to_event_location is (I believe) out of date. This commit fixes the two issues I see: 1. This function can't return NULL any more. The implementation calls string_to_explicit_location which can return NULL, but if this is the case we then call string_to_event_location_basic, which I don't believe can ever return NULL. 2. I've removed the mention that the returned string is malloc'd, though this is true, now that we return a managed pointer, I believe the source of the memory allocation is irrelevant, and so, shouldn't be discussed in the header comment. There should be no user visible changes after this commit. 2022-02-02 Nick Clifton Updated French translation for the ld/ and gold/ sub-directories 2022-02-02 Stafford Horne or1k: Avoid R_OR1K_GOT16 signed overflow by using special howto Previously when fixing PR 21464 we masked out upper bits of the relocation value in order to avoid overflow complaints when acceptable. It turns out this does not work when the relocation value ends up being signed. To fix this this patch introduces a special howto with complain_on_overflow set to complain_overflow_dont. This is used in place of the normal R_OR1K_GOT16 howto when we detect R_OR1K_GOT_AHI16 relocations. bfd/ChangeLog: PR 28735 * elf32-or1k.c (or1k_elf_got16_no_overflow_howto): Define. (or1k_elf_relocate_section): Use new howto instead of trying to mask out relocation bits. 2022-02-02 GDB Administrator Automatic date update in version.in 2022-02-01 Tom Tromey Fix flex rule in gdb Currently, if flex fails, it will leave the resulting .c file in the tree. This will cause a cascade of errors, and requires the manual deletion of the .c file in order to recreate the problem. It's better for the rule to fail such that the .c file is not updated. This way, 'make' will fail the same way every time -- which is much handier for debugging syntax errors. This fix just updates the Makefile rule to follow the way that the "yacc" rule already works. 2022-02-01 Markus Metzger gdb, btrace: improve error messages When trying to use 'record btrace' on a system that does not support it, the error message isn't as clear as it could be. See https://sourceware.org/pipermail/gdb/2022-January/049870.html. Improve the error message in a few cases. Reported-by: Simon Sobisch 2022-02-01 Jan Vrany gdb/python: fix gdb.Objfile.__repr__ () for dynamically compiled code While experimenting with JIT reader API I realized that calling repr () on objfile created by JIT reader crashes GDB. The problem was that objfpy_repr () called objfile_filename () which returned NULL, causing PyString_FromFormat () to crash. This commit fixes this problem by using objfile_name () instead of objfile_filename (). This also makes consistent with the value of gdb.Objfile.filename variable. 2022-02-01 Samuel Thibault hurd: Fix RPC prototypes The last updates of MIG introduced qualifying strings and arrays with const as appropriate. We thus have to update the protypes in gdb too. Change-Id: I3f72aac1dfa6e58d1394d5776b822d7c8f2409df 2022-02-01 Samuel Thibault hurd: Fix RPC link names The RPC stub code expects to be calling a C function, not a C++ function. Change-Id: Idd7549fc118f2addc7fb4975667a011cacacc03f 2022-02-01 GDB Administrator Automatic date update in version.in 2022-01-31 H.J. Lu elf: Check symbol version without any symbols VER_FLG_WEAK doesn't indicate that all symbol references of the symbol version have STB_WEAK. VER_FLG_WEAK indicates a weak symbol version definition with no symbols associated with it. It is used to verify the existence of a particular implementation without any symbol references to the weak symbol version. PR ld/24718 * testsuite/ld-elf/pr24718-1.d: New file. * testsuite/ld-elf/pr24718-1.s: Likewise. * testsuite/ld-elf/pr24718-1.t: Likewise. 2022-01-31 H.J. Lu Load debug section only when dumping debug sections Don't load debug sections if we aren't dumping any debug sections. PR binutils/28843 * objdump.c (dump_any_debugging): New. (load_debug_section): Return false if dump_any_debugging isn't set. (main): Set dump_any_debugging when dumping any debug sections. * readelf (dump_any_debugging): New. (parse_args): Set dump_any_debugging when dumping any debug sections. (load_debug_section): Return false if dump_any_debugging isn't set. 2022-01-31 Simon Marchi gdb: fix some clang-tidy readability-misleading-indentation warnings I have warnings like these showing in my editor all the time, so I thought I'd run clang-tidy with this diagnostic on all the files (that I can compile) and fix them. There is still one warning, in utils.c, but that's because some code is mixed up with preprocessor macros (#ifdef TUI), so I think there no good solution there. Change-Id: I345175fc7dd865318f0fbe61ac026c88c3b6a96b 2022-01-31 Nils-Christian Kempke gdb, testsuite, fortran: adapt info symbol expected output for intel compilers Info symbol is expected to print the symbol table name of a symbol, since symbol lookup happens via the minimal symbol table. This name corresponds to the linkage name in the full symbol table. For gfortran (and maybe others) these names currently have the form XXXX.NUMBER where XXXX is the symbol name and NUMBER a compiler generated appendix for mangling. An example taken from the modified nested-funcs-2.exp would be ~~~~ $ objdump -t ./outputs/gdb.fortran/nested-funcs-2/nested-funcs-2 | grep \ increment 00000000000014ab l F .text 0000000000000095 increment.3883 000000000000141c l F .text 000000000000008f increment_program_global.3881 ~~~~ This mangled name gets recognized by the Ada demangler/decoder and decoded as Ada to XXXX (setting the symbol language to Ada). This leads to output of XXXX over XXXX.NUMBER for info symbol on gfortran symbols. For ifort and ifx the generated linkage names have the form SCOPEA_SCOPEB_XXXX_ which are not recognized by the Ada decoder (or any other demangler for that matter) and thus printed as is. The respective objdump in the above case looks like ~~~~ $ objdump -t ./outputs/gdb.fortran/nested-funcs-2/nested-funcs-2 | grep \ increment 0000000000403a44 l F .text 0000000000000074 contains_keyword_IP_increment_ 0000000000403ab8 l F .text 0000000000000070 contains_keyword_IP_increment_program_global_ ~~~~ In the unmodified testcase this results in 'fails' when ran with the intel compilers: ~~~~ >> make check RUNTESTFLAGS="gdb.fortran/nested-funcs-2.exp \ GDBFLAGS='$GDBFLAGS' CC_FOR_TARGET='icpc' F90_FOR_TARGET='ifort'" ... === gdb Summary === \# of expected passes 80 \# of unexpected failures 14 ~~~~ Note that there is no Fortran mangling standard. We keep the gfortran behavior as is and modify the test to reflect ifx and ifort mangled names which fixes above fails. 2022-01-31 Nick Clifton Import patch from mainline GCC to fix an infinite recusion in the Rust demangler. PR 98886 PR 99935 * rust-demangle.c (struct rust_demangler): Add a recursion counter. (demangle_path): Increment/decrement the recursion counter upon entry and exit. Fail if the counter exceeds a fixed limit. (demangle_type): Likewise. (rust_demangle_callback): Initialise the recursion counter, disabling if requested by the option flags. 2022-01-31 Alan Modra Re: PR28827, assertion building LLVM 9 on powerpc64le-linux-gnu In trying to find a testcase for PR28827, I managed to hit a linker error in bfd_set_section_contents with a .branch_lt input section being too large for the output .branch_lt. bfd/ PR 28827 * elf64-ppc.c (ppc64_elf_size_stubs): Set section size to maxsize past STUB_SHRINK_ITER before laying out. Remove now unnecessary conditional setting of maxsize at start of loop. ld/ * testsuite/ld-powerpc/pr28827-2.d, * testsuite/ld-powerpc/pr28827-2.lnk, * testsuite/ld-powerpc/pr28827-2.s: New test. * testsuite/ld-powerpc/powerpc.exp: Run it. 2022-01-31 Tom Tromey Remove unused variables in fbsd-tdep.c files i386-fbsd-tdep.c and amd64-fbsd-tdep.c failed to build on my x86-64 Fedora 34 machine, using the system gcc, after a recent patch. These two files now have unused variables, which provokes a warning in this configuration. I'm checking in this patch to remove the unused variables. 2022-01-31 GDB Administrator Automatic date update in version.in 2022-01-30 GDB Administrator Automatic date update in version.in 2022-01-29 Alan Modra Re: PR28827, assertion building LLVM 9 on powerpc64le-linux-gnu The previous patch wasn't quite correct. The size and padding depends on offset used in the current iteration, and if we're fudging the offset past STUB_SHRINK_ITER then we'd better use that offset. We can't have plt_stub_pad using stub_sec->size as the offset. PR 28827 * elf64-ppc.c (plt_stub_pad): Add stub_off param. (ppc_size_one_stub): Set up stub_offset to value used in this iteration before sizing the stub. Adjust plt_stub_pad calls. 2022-01-29 Alan Modra objcopy --only-keep-debug From: Peilin Ye objcopy's --only-keep-debug option has been broken for ELF files since commit 8c803a2dd7d3. 1. binutils/objcopy.c:setup_section() marks non-debug sections as SHT_NOBITS, then calls bfd_copy_private_section_data(); 2. If ISEC and OSEC share the same section flags, bfd/elf.c:_bfd_elf_init_private_section_data() restores OSEC's section type back to ISEC's section type, effectively undoing "make_nobits". * objcopy.c (setup_section): Act on make_nobits after calling bfd_copy_private_section_data. 2022-01-29 GDB Administrator Automatic date update in version.in 2022-01-28 John Baldwin gdb: fix ppc-sysv-tdep.c build on 32-bit platforms The previous code triggered the following error on an i386 host: /git/gdb/gdb/ppc-sysv-tdep.c:1764:34: error: non-constant-expression cannot be narrowed from type 'ULONGEST' (aka 'unsigned long long') to 'size_t' (aka 'unsigned int') in initializer list [-Wc++11-narrowing] unscaled.read ({writebuf, TYPE_LENGTH (valtype)}, ^~~~~~~~~~~~~~~~~~~~~ /git/gdb/gdb/gdbtypes.h:2043:31: note: expanded from macro 'TYPE_LENGTH' ^~~~~~~~~~~~~~~~~~ /git/gdb/gdb/ppc-sysv-tdep.c:1764:34: note: insert an explicit cast to silence this issue unscaled.read ({writebuf, TYPE_LENGTH (valtype)}, ^~~~~~~~~~~~~~~~~~~~~ static_cast( ) /git/gdb/gdb/gdbtypes.h:2043:31: note: expanded from macro 'TYPE_LENGTH' ^~~~~~~~~~~~~~~~~~ 1 error generated. Fix this by using gdb::make_array_view. 2022-01-28 John Baldwin FreeBSD x86 nat: Use register maps for GP register sets. Rather than using the x86-specific register offset tables, use register maps to describe the layout of the general purpose registers fetched via PT_GETREGS. The sole user-visible difference is that FreeBSD/amd64 will now report additional segment registers ($ds, $es, $fs, and $gs) for both 32-bit and 64-bit processes. As part of these changes, the FreeBSD x86 native targets no longer use amd64-bsd-nat.c or i386-bsd-nat.c. Remove FreeBSD-specific register handling (for $fs_base, $gs_base, and XSAVE state) from these files. Similarly, remove the global x86bsd_xsave_len from x86-bsd-nat.c. The FreeBSD x86 native targets use a static xsave_len instead. While here, rework the probing of PT_GETXMMREGS on FreeBSD/i386. Probe the ptrace op once in the target read_description method and cache the result for the future similar to the way the status of XSAVE support is probed in the read_description method. In addition, return the proper xcr0 mask (X87-only) for old kernels or systems without either XSAVE or XMM support. 2022-01-28 John Baldwin fbsd-nat: Return a bool from fetch_register_set and store_register_set. Change these helper functions to return true if they did any work. 2022-01-28 John Baldwin FreeBSD x86: Use tramp-frame for signal frames. Use a register map to describe the registers in mcontext_t as part of the signal frame as is done on several other FreeBSD arches. This permits fetching the fsbase and gsbase register values from the signal frame for both amd64 and i386 and permits fetching additional segment registers stored as 16-bit values on amd64. While signal frames on FreeBSD do contain floating point/XSAVE state, these unwinders do not attempt to supply those registers. The existing x86 signal frame uwinders do not support these registers, and the only existing functions which handle FSAVE/FXSAVE/XSAVE state all work with regcaches. In the future these unwinders could create a tempory regcache, collect floating point registers, and then supply values out of the regcache into the trad-frame. 2022-01-28 John Baldwin Use register maps for gp regsets on FreeBSD/x86 core dumps. In particular, this permits reporting the value of the $ds, $es, $fs, and $gs segment registers from amd64 core dumps since they are stored as 16-bit values rather than the 32-bit size assumed by i386_gregset. 2022-01-28 John Baldwin regcache: Zero-extend small registers described by a register map. When registers are supplied via regcache_supply_register from a register block described by a register map, registers may be stored in slots smaller than GDB's native register size (e.g. x86 segment registers are 16 bits, but the GDB registers for those are 32-bits). regcache_collect_regset is careful to zero-extend slots larger than a register size, but regcache_supply_regset just used regcache::raw_supply_part and did not initialize the upper bytes of a register value. trad_frame_set_reg_regmap assumes these semantics (zero-extending short registers). Upcoming patches also require these semantics for handling x86 segment register values stored in 16-bit slots on FreeBSD. Note that architecturally x86 segment registers are 16 bits, but the x86 gdb architectures treat these registers as 32 bits. 2022-01-28 John Baldwin FreeBSD x86: Remove fallback for detecting signal trampolines by address. A few FreeBSD releases did not include the page holding the signal code in core dumps. As a workaround, a sysctl was used to fetch the default location of the signal code instead. The youngest affected FreeBSD release is 10.1 released in November 2014 and EOLed in December 2016. The fallback only works for native processes and would require a separate unwinder once the FreeBSD arches are converted to use tramp_frame for signal frames. Remove support for pre-5.0 FreeBSD/i386 signal trampolines. The last relevant release (FreeBSD 4.11) was released in January of 2005. Remove vestigal FreeBSD/i386 3.x support. This was orphaned when a.out support was removed as the FreeBSD/i386 ELF support always used the register layouts from 4.0+. 2022-01-28 Bruno Larsen Add Bruno Larsen to gdb/MAINTAINERS 2022-01-28 Enze Li gdb/build: Fix Wpessimizing-move in clang build When building with clang, I run into an error: ... tui/tui-disasm.c:138:25: error: moving a temporary object prevents copy elision [-Werror,-Wpessimizing-move] tal.addr_string = std::move (gdb_dis_out.release ()); ^ tui/tui-disasm.c:138:25: note: remove std::move call here tal.addr_string = std::move (gdb_dis_out.release ()); ^~~~~~~~~~~ ~ ... The error above is caused by the recent commit 5d10a2041eb8 ("gdb: add string_file::release method"). Fix this by removing std::move. Build on x86_64-linux with clang 13.0.0. 2022-01-28 Simon Marchi Add top-level .editorconfig file Add a .editorconfig [1] file. This helps configure editors automatically with the right whitespace settings. It will help me, since I need to juggle with different whitespace settings for different projects. But I think it can also help newcomers get things right from the start. Some editors have native support for reading these files, while others require a plug-in [2]. And if you don't want to use it, then this file doesn't change anything to your life. I added rules for the kinds of files I edit most often, but more can be added later. I assumed that the rules were the same for GDB and the other projects, but if that's not the case, we can always put .editorconfig files in project subdirectories to override settings. [1] https://editorconfig.org/ [2] https://editorconfig.org/#download Change-Id: Ifda136d13877fafcf0d137fec8501f6a34e1367b 2022-01-28 Nick Clifton Updated French translation for the gas sub-directory. 2022-01-28 Alan Modra Set __ehdr_start rel_from_abs earlier This is just a tidy, making the __ehdr_start symbol flag tweaks all in one place. * ldelf.c (ldelf_before_allocation): Don't set rel_from_abs for __ehdr_start. * ldlang.c (lang_symbol_tweaks): Set it here instead. 2022-01-28 Alan Modra PowerPC64 handling of @tocbase * elf64-ppc.c (ppc64_elf_relocate_section): Warn if the symbol on R_PPC64_TOC isn't local. 2022-01-28 Alan Modra Update PowerPC64 symtocbase test Using a symbol other than .TOC. with @tocbase is an extension to the ABI. It is never valid to use a symbol without a definition in the binary, and symbols on these expressions cannot be overridden. Make this explicit by using ".hidden" in the testcase. * testsuite/ld-powerpc/symtocbase-1.s: Align data. Make function entry symbol hidden. * testsuite/ld-powerpc/symtocbase-2.s: Likewise. * testsuite/ld-powerpc/symtocbase.d: Adjust expected output. 2022-01-28 Alan Modra PR28827, assertion building LLVM 9 on powerpc64le-linux-gnu The assertion is this one in ppc_build_one_stub BFD_ASSERT (stub_entry->stub_offset >= stub_entry->group->stub_sec->size); It is checking that a stub doesn't overwrite the tail of a previous stub, so not something trivial. Normally, stub sizing iterates until no stubs are added, detected by no change in stub section size. Iteration also continues if no stubs are added but one or more stubs increases in size, which also can be detected by a change in stub section size. But there is a pathological case where stub section sizing decreases one iteration then increases the next. To handle that situation, stub sizing also stops at more than STUB_SHRINK_ITER (20) iterations when calculated stub section size is smaller. The previous larger size is kept for the actual layout (so that building the stubs, which behaves like another iteration of stub sizing, will see the stub section sizes shrink). The problem with that stopping condition is that it assumes that stub sizing is only affected by addresses external to the stub sections, which isn't always true. This patch fixes that by also keeping larger individual stub_offset addresses past STUB_SHRINK_ITER. It also catches a further pathological case where one stub shrinks and another expands in such a way that no stub section size change is seen. PR 28827 * elf64-ppc.c (struct ppc_link_hash_table): Add stub_changed. (STUB_SHRINK_ITER): Move earlier in file. (ppc_size_one_stub): Detect any change in stub_offset. Keep larger one if past STUB_SHRINK_ITER. (ppc64_elf_size_stubs): Iterate on stub_changed too. 2022-01-28 Alan Modra PR28826 x86_64 ld segfaults building xen Fallout from commit e86fc4a5bc37 PR 28826 * coffgen.c (coff_write_alien_symbol): Init dummy to zeros. 2022-01-28 Alan Modra PR28753, buffer overflow in read_section_stabs_debugging_info PR 28753 * rddbg.c (read_section_stabs_debugging_info): Don't read past end of section when concatentating stab strings. 2022-01-28 GDB Administrator Automatic date update in version.in 2022-01-27 Simon Marchi gdb: work around negative DW_AT_data_member_location GCC 11 bug g++ 11.1.0 has a bug where it will emit a negative DW_AT_data_member_location in some cases: $ cat test.cpp #include int main() { std::unique_ptr ptr; } $ g++ -g test.cpp $ llvm-dwarfdump -F a.out ... 0x00000964: DW_TAG_member DW_AT_name [DW_FORM_strp] ("_M_head_impl") DW_AT_decl_file [DW_FORM_data1] ("/usr/include/c++/11.1.0/tuple") DW_AT_decl_line [DW_FORM_data1] (125) DW_AT_decl_column [DW_FORM_data1] (0x27) DW_AT_type [DW_FORM_ref4] (0x0000067a "default_delete") DW_AT_data_member_location [DW_FORM_sdata] (-1) ... This leads to a GDB crash (when built with ASan, otherwise probably garbage results), since it tries to read just before (to the left, in ASan speak) of the value's buffer: ==888645==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6020000c52af at pc 0x7f711b239f4b bp 0x7fff356bd470 sp 0x7fff356bcc18 READ of size 1 at 0x6020000c52af thread T0 #0 0x7f711b239f4a in __interceptor_memcpy /build/gcc/src/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:827 #1 0x555c4977efa1 in value_contents_copy_raw /home/simark/src/binutils-gdb/gdb/value.c:1347 #2 0x555c497909cd in value_primitive_field(value*, long, int, type*) /home/simark/src/binutils-gdb/gdb/value.c:3126 #3 0x555c478f2eaa in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:333 #4 0x555c478f63b2 in cp_print_value /home/simark/src/binutils-gdb/gdb/cp-valprint.c:513 #5 0x555c478f02ca in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:161 #6 0x555c478f63b2 in cp_print_value /home/simark/src/binutils-gdb/gdb/cp-valprint.c:513 #7 0x555c478f02ca in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:161 #8 0x555c478f63b2 in cp_print_value /home/simark/src/binutils-gdb/gdb/cp-valprint.c:513 #9 0x555c478f02ca in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:161 #10 0x555c4760d45f in c_value_print_struct /home/simark/src/binutils-gdb/gdb/c-valprint.c:383 #11 0x555c4760df4c in c_value_print_inner(value*, ui_file*, int, value_print_options const*) /home/simark/src/binutils-gdb/gdb/c-valprint.c:438 #12 0x555c483ff9a7 in language_defn::value_print_inner(value*, ui_file*, int, value_print_options const*) const /home/simark/src/binutils-gdb/gdb/language.c:632 #13 0x555c49758b68 in do_val_print /home/simark/src/binutils-gdb/gdb/valprint.c:1048 #14 0x555c49759b17 in common_val_print(value*, ui_file*, int, value_print_options const*, language_defn const*) /home/simark/src/binutils-gdb/gdb/valprint.c:1151 #15 0x555c478f2fcb in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:335 #16 0x555c478f63b2 in cp_print_value /home/simark/src/binutils-gdb/gdb/cp-valprint.c:513 #17 0x555c478f02ca in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:161 #18 0x555c4760d45f in c_value_print_struct /home/simark/src/binutils-gdb/gdb/c-valprint.c:383 #19 0x555c4760df4c in c_value_print_inner(value*, ui_file*, int, value_print_options const*) /home/simark/src/binutils-gdb/gdb/c-valprint.c:438 #20 0x555c483ff9a7 in language_defn::value_print_inner(value*, ui_file*, int, value_print_options const*) const /home/simark/src/binutils-gdb/gdb/language.c:632 #21 0x555c49758b68 in do_val_print /home/simark/src/binutils-gdb/gdb/valprint.c:1048 #22 0x555c49759b17 in common_val_print(value*, ui_file*, int, value_print_options const*, language_defn const*) /home/simark/src/binutils-gdb/gdb/valprint.c:1151 #23 0x555c478f2fcb in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:335 #24 0x555c4760d45f in c_value_print_struct /home/simark/src/binutils-gdb/gdb/c-valprint.c:383 #25 0x555c4760df4c in c_value_print_inner(value*, ui_file*, int, value_print_options const*) /home/simark/src/binutils-gdb/gdb/c-valprint.c:438 #26 0x555c483ff9a7 in language_defn::value_print_inner(value*, ui_file*, int, value_print_options const*) const /home/simark/src/binutils-gdb/gdb/language.c:632 #27 0x555c49758b68 in do_val_print /home/simark/src/binutils-gdb/gdb/valprint.c:1048 #28 0x555c49759b17 in common_val_print(value*, ui_file*, int, value_print_options const*, language_defn const*) /home/simark/src/binutils-gdb/gdb/valprint.c:1151 #29 0x555c4760f04c in c_value_print(value*, ui_file*, value_print_options const*) /home/simark/src/binutils-gdb/gdb/c-valprint.c:587 #30 0x555c483ff954 in language_defn::value_print(value*, ui_file*, value_print_options const*) const /home/simark/src/binutils-gdb/gdb/language.c:614 #31 0x555c49759f61 in value_print(value*, ui_file*, value_print_options const*) /home/simark/src/binutils-gdb/gdb/valprint.c:1189 #32 0x555c48950f70 in print_formatted /home/simark/src/binutils-gdb/gdb/printcmd.c:337 #33 0x555c48958eda in print_value(value*, value_print_options const&) /home/simark/src/binutils-gdb/gdb/printcmd.c:1258 #34 0x555c48959891 in print_command_1 /home/simark/src/binutils-gdb/gdb/printcmd.c:1367 #35 0x555c4895a3df in print_command /home/simark/src/binutils-gdb/gdb/printcmd.c:1458 #36 0x555c4767f974 in do_simple_func /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:97 #37 0x555c47692e25 in cmd_func(cmd_list_element*, char const*, int) /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:2475 #38 0x555c4936107e in execute_command(char const*, int) /home/simark/src/binutils-gdb/gdb/top.c:670 #39 0x555c485f1bff in catch_command_errors /home/simark/src/binutils-gdb/gdb/main.c:523 #40 0x555c485f249c in execute_cmdargs /home/simark/src/binutils-gdb/gdb/main.c:618 #41 0x555c485f6677 in captured_main_1 /home/simark/src/binutils-gdb/gdb/main.c:1317 #42 0x555c485f6c83 in captured_main /home/simark/src/binutils-gdb/gdb/main.c:1338 #43 0x555c485f6d65 in gdb_main(captured_main_args*) /home/simark/src/binutils-gdb/gdb/main.c:1363 #44 0x555c46e41ba8 in main /home/simark/src/binutils-gdb/gdb/gdb.c:32 #45 0x7f71198bcb24 in __libc_start_main (/usr/lib/libc.so.6+0x27b24) #46 0x555c46e4197d in _start (/home/simark/build/binutils-gdb-one-target/gdb/gdb+0x77f197d) 0x6020000c52af is located 1 bytes to the left of 8-byte region [0x6020000c52b0,0x6020000c52b8) allocated by thread T0 here: #0 0x7f711b2b7459 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x555c470acdc9 in xcalloc /home/simark/src/binutils-gdb/gdb/alloc.c:100 #2 0x555c49b775cd in xzalloc(unsigned long) /home/simark/src/binutils-gdb/gdbsupport/common-utils.cc:29 #3 0x555c4977bdeb in allocate_value_contents /home/simark/src/binutils-gdb/gdb/value.c:1029 #4 0x555c4977be25 in allocate_value(type*) /home/simark/src/binutils-gdb/gdb/value.c:1040 #5 0x555c4979030d in value_primitive_field(value*, long, int, type*) /home/simark/src/binutils-gdb/gdb/value.c:3092 #6 0x555c478f6280 in cp_print_value /home/simark/src/binutils-gdb/gdb/cp-valprint.c:501 #7 0x555c478f02ca in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:161 #8 0x555c478f63b2 in cp_print_value /home/simark/src/binutils-gdb/gdb/cp-valprint.c:513 #9 0x555c478f02ca in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:161 #10 0x555c478f63b2 in cp_print_value /home/simark/src/binutils-gdb/gdb/cp-valprint.c:513 #11 0x555c478f02ca in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:161 #12 0x555c4760d45f in c_value_print_struct /home/simark/src/binutils-gdb/gdb/c-valprint.c:383 #13 0x555c4760df4c in c_value_print_inner(value*, ui_file*, int, value_print_options const*) /home/simark/src/binutils-gdb/gdb/c-valprint.c:438 #14 0x555c483ff9a7 in language_defn::value_print_inner(value*, ui_file*, int, value_print_options const*) const /home/simark/src/binutils-gdb/gdb/language.c:632 #15 0x555c49758b68 in do_val_print /home/simark/src/binutils-gdb/gdb/valprint.c:1048 #16 0x555c49759b17 in common_val_print(value*, ui_file*, int, value_print_options const*, language_defn const*) /home/simark/src/binutils-gdb/gdb/valprint.c:1151 #17 0x555c478f2fcb in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:335 #18 0x555c478f63b2 in cp_print_value /home/simark/src/binutils-gdb/gdb/cp-valprint.c:513 #19 0x555c478f02ca in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:161 #20 0x555c4760d45f in c_value_print_struct /home/simark/src/binutils-gdb/gdb/c-valprint.c:383 #21 0x555c4760df4c in c_value_print_inner(value*, ui_file*, int, value_print_options const*) /home/simark/src/binutils-gdb/gdb/c-valprint.c:438 #22 0x555c483ff9a7 in language_defn::value_print_inner(value*, ui_file*, int, value_print_options const*) const /home/simark/src/binutils-gdb/gdb/language.c:632 #23 0x555c49758b68 in do_val_print /home/simark/src/binutils-gdb/gdb/valprint.c:1048 #24 0x555c49759b17 in common_val_print(value*, ui_file*, int, value_print_options const*, language_defn const*) /home/simark/src/binutils-gdb/gdb/valprint.c:1151 #25 0x555c478f2fcb in cp_print_value_fields(value*, ui_file*, int, value_print_options const*, type**, int) /home/simark/src/binutils-gdb/gdb/cp-valprint.c:335 #26 0x555c4760d45f in c_value_print_struct /home/simark/src/binutils-gdb/gdb/c-valprint.c:383 #27 0x555c4760df4c in c_value_print_inner(value*, ui_file*, int, value_print_options const*) /home/simark/src/binutils-gdb/gdb/c-valprint.c:438 #28 0x555c483ff9a7 in language_defn::value_print_inner(value*, ui_file*, int, value_print_options const*) const /home/simark/src/binutils-gdb/gdb/language.c:632 #29 0x555c49758b68 in do_val_print /home/simark/src/binutils-gdb/gdb/valprint.c:1048 Since there are some binaries with this in the wild, I think it would be useful for GDB to work around this. I did the obvious simple thing, if the DW_AT_data_member_location's value is -1, replace it with 0. I added a producer check to only apply this fixup for GCC 11. The idea is that if some other compiler ever uses a DW_AT_data_member_location value of -1 by mistake, we don't know (before analyzing the bug at least) if they did mean 0 or some other value. So I wouldn't want to apply the fixup in that case. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28063 Change-Id: Ieef3459b0b9bbce8bdad838ba83b4b64e7269d42 2022-01-27 Kevin Buettner Fix GDB internal error by using text (instead of data) section offset Fedora Rawhide is now using gcc-12.0. As part of updating to the gcc-12.0 package set, Rawhide is also now using a version of libgcc_s which lacks a .data section. This causes gdb to fail in the following fashion while debugging a program (such as gdb) which uses libgcc_s: (top-gdb) run Starting program: rawhide-master/bld/gdb/gdb ... objfiles.h:467: internal-error: sect_index_data not initialized A problem internal to GDB has been detected, further debugging may prove unreliable. ... I snipped the backtrace from the above output. Instead, here's a portion of a backtrace obtained using GDB's backtrace command. (Obviously, in order to obtain it, I used a GDB which has been patched with this commit.) #0 internal_error ( file=0xc6a508 "gdb/objfiles.h", line=467, fmt=0xc6a4e8 "sect_index_data not initialized") at gdbsupport/errors.cc:51 #1 0x00000000005f9651 in objfile::data_section_offset (this=0x4fa48f0) at gdb/objfiles.h:467 #2 0x000000000097c5f8 in relocate_address (address=0x17244, objfile=0x4fa48f0) at gdb/stap-probe.c:1333 #3 0x000000000097c630 in stap_probe::get_relocated_address (this=0xa1a17a0, objfile=0x4fa48f0) at gdb/stap-probe.c:1341 #4 0x00000000004d7025 in create_exception_master_breakpoint_probe ( objfile=0x4fa48f0) at gdb/breakpoint.c:3505 #5 0x00000000004d7426 in create_exception_master_breakpoint () at gdb/breakpoint.c:3575 #6 0x00000000004efcc1 in breakpoint_re_set () at gdb/breakpoint.c:13407 #7 0x0000000000956998 in solib_add (pattern=0x0, from_tty=0, readsyms=1) at gdb/solib.c:1001 #8 0x00000000009576a8 in handle_solib_event () at gdb/solib.c:1269 ... The function 'relocate_address' in gdb/stap-probe.c attempts to do its "relocation" by using objfile->data_section_offset(). That method, data_section_offset() is defined as follows in objfiles.h: CORE_ADDR data_section_offset () const { return section_offsets[SECT_OFF_DATA (this)]; } The internal error occurs when the SECT_OFF_DATA macro finds that the 'sect_index_data' field is -1: #define SECT_OFF_DATA(objfile) \ ((objfile->sect_index_data == -1) \ ? (internal_error (__FILE__, __LINE__, \ _("sect_index_data not initialized")), -1) \ : objfile->sect_index_data) relocate_address() is obtaining the section offset in order to compute a relocated address. For some ABIs, such as the System V ABI, the section offsets will all be the same. So for those ABIs, it doesn't matter which offset is used. However, other ABIs, such as the FDPIC ABI, will have different offsets for the various sections. Thus, for those ABIs, it is vital that this and other relocation code use the correct offset. In stap_probe::get_relocated_address, the address to which to add the offset (thus forming the relocated address) is obtained via this->get_address (); get_address is a getter for m_address in probe.h. It's documented/defined as follows (also in probe.h): /* The address where the probe is inserted, relative to SECT_OFF_TEXT. */ CORE_ADDR m_address; (Thanks to Tom Tromey for this observation.) So, based on this, the current use of data_section_offset / SECT_OFF_DATA is wrong. This relocation code should have been using text_section_offset / SECT_OFF_TEXT all along. That being the case, I've adjusted the stap-probe.c relocation code accordingly. Searching the sources turned up one other use of data_section_offset, in gdb/dtrace-probe.c, so I've updated that code as well. The same reasoning presented above applies to this case too. Summary: * gdb/dtrace-probe.c (dtrace_probe::get_relocated_address): Use method text_section_offset instead of data_section_offset. * gdb/stap-probe.c (relocate_address): Likewise. 2022-01-27 Markus Metzger gdb, remote, btrace: move switch_to_thread call right before xfer call In remote_target::remote_btrace_maybe_reopen, we switch to the currently iterated thread in order to set inferior_ptid for a subsequent xfer. Move the switch_to_thread call directly before the target_read_stralloc call to clarify why we need to switch threads. 2022-01-27 Markus Metzger gdb, gdbserver: update thread identifier in enable_btrace target method The enable_btrace target method takes a ptid_t to identify the thread on which tracing shall be enabled. Change this to thread_info * to avoid translating back and forth between the two. This will be used in a subsequent patch. 2022-01-27 Markus Metzger gdb, btrace: switch threads in remote_btrace_maybe_reopen() In remote_btrace_maybe_reopen() we iterate over threads and use set_general_thread() to set the thread from which to transfer the btrace configuration. This sets the remote general thread but does not affect inferior_ptid. On the xfer request later on, remote_target::xfer_partial() again sets the remote general thread to inferior_ptid, overwriting what remote_btrace_maybe_reopen() had done. In one case, this led to inferior_ptid being null_ptid when we tried to enable tracing on a newly created thread inside a newly created process during attach. This, in turn, led to find_inferior_pid() asserting when we iterated over threads in record_btrace_is_replaying(), which was called from record_btrace_target::xfer_partial() when reading the btrace configuration of the new thread to check whether it was already being recorded. The bug was exposed by 0618ae41497 gdb: optimize all_matching_threads_iterator and found by FAIL: gdb.btrace/enable-new-thread.exp: ... (GDB internal error) Use switch_to_thread() in remote_btrace_maybe_reopen(). 2022-01-27 Markus Metzger gdb, btrace: rename record_btrace_enable_warn() We use record_btrace_enable_warn() as the new-thread observer callback. It is not used in other contexts. Rename it to record_btrace_on_new_thread() to make its role more clear. 2022-01-27 Nick Clifton Updated Swedish translation for the binutils subdirectory 2022-01-27 GDB Administrator Automatic date update in version.in 2022-01-26 Andrew Burgess gdb/python: handle non utf-8 characters when source highlighting This commit adds support for source files that contain non utf-8 characters when performing source styling using the Python pygments package. This does not change the behaviour of GDB when the GNU Source Highlight library is used. For the following problem description, assume that either GDB is built without GNU Source Highlight support, of that this has been disabled using 'maintenance set gnu-source-highlight enabled off'. The initial problem reported was that a source file containing non utf-8 characters would cause GDB to print a Python exception, and then display the source without styling, e.g.: Python Exception : 'utf-8' codec can't decode byte 0xc0 in position 142: invalid start byte /* Source code here, without styling... */ Further, as the user steps through different source files, each time the problematic source file was evicted from the source cache, and then later reloaded, the exception would be printed again. Finally, this problem is only present when using Python 3, this issue is not present for Python 2. What makes this especially frustrating is that GDB can clearly print the source file contents, they're right there... If we disable styling completely, or make use of the GNU Source Highlight library, then everything is fine. So why is there an error when we try to apply styling using Python? The problem is the use of PyString_FromString (which is an alias for PyUnicode_FromString in Python 3), this function converts a C string into a either a Unicode object (Py3) or a str object (Py2). For Python 2 there is no unicode encoding performed during this function call, but for Python 3 the input is assumed to be a uft-8 encoding string for the purpose of the conversion. And here of course, is the problem, if the source file contains non utf-8 characters, then it should not be treated as utf-8, but that's what we do, and that's why we get an error. My first thought when looking at this was to spot when the PyString_FromString call failed with a UnicodeDecodeError and silently ignore the error. This would mean that GDB would print the source without styling, but would also avoid the annoying exception message. However, I also make use of `pygmentize`, a command line wrapper around the Python pygments module, which I use to apply syntax highlighting in the output of `less`. And this command line wrapper is quite happy to syntax highlight my source file that contains non utf-8 characters, so it feels like the problem should be solvable. It turns out that inside the pygments module there is already support for guessing the encoding of the incoming file content, if the incoming content is not already a Unicode string. This is what happens for Python 2 where the incoming content is of `str` type. We could try and make GDB smarter when it comes to converting C strings into Python Unicode objects; this would probably require us to just try a couple of different encoding schemes rather than just giving up after utf-8. However, I figure, why bother? The pygments module already does this for us, and the colorize API is not part of the documented external API of GDB. So, why not just change the colorize API, instead of the content being a Unicode string (for Python 3), lets just make the content be a bytes object. The pygments module can then take responsibility for guessing the encoding. So, currently, the colorize API receives a unicode object, and returns a unicode object. I propose that the colorize API receive a bytes object, and return a bytes object. 2022-01-26 Tom Tromey Remove global wrap_here function This removes the global wrap_here function, so that future calls cannot be introduced. Instead, all callers must use the method on the appropriate ui_file. This temporarily moves the implementation of this method to utils.c. This will change once the remaining patches to untangle the pager have been written. 2022-01-26 Tom Tromey Always call the wrap_here method This changes all existing calls to wrap_here to call the method on the appropriate ui_file instead. The choice of ui_file is determined by context. 2022-01-26 Tom Tromey Add ui_file::wrap_here Right now, wrap_here is a global function. In the long run, we'd like output streams to be relatively self-contained objects, and having a global function like this is counter to that goal. Also, existing code freely mixes writes to some parameterized stream with calls to wrap_here -- but wrap_here only really affects gdb_stdout, so this is also incoherent. This step is a patch toward making wrap_here more sane. It adds a wrap_here method to ui_file and changes ui_out implementations to use it. 2022-01-26 Tom Tromey Convert wrap_here to use integer parameter I think it only really makes sense to call wrap_here with an argument consisting solely of spaces. Given this, it seemed better to me that the argument be an int, rather than a string. This patch is the result. Much of it was written by a script. 2022-01-26 Andrew Burgess gdb/python: improve the auto help text for gdb.Parameter This commit attempts to improve the help text that is generated for gdb.Parameter objects when the user fails to provide their own documentation. Documentation for a gdb.Parameter is currently pulled from two sources: the class documentation string, and the set_doc/show_doc class attributes. Thus, a fully documented parameter might look like this: class Param_All (gdb.Parameter): """This is the class documentation string.""" show_doc = "Show the state of this parameter" set_doc = "Set the state of this parameter" def get_set_string (self): val = "on" if (self.value == False): val = "off" return "Test Parameter has been set to " + val def __init__ (self, name): super (Param_All, self).__init__ (name, gdb.COMMAND_DATA, gdb.PARAM_BOOLEAN) self._value = True Param_All ('param-all') Then in GDB we see this: (gdb) help set param-all Set the state of this parameter This is the class documentation string. Which is fine. But, if the user skips both of the documentation parts like this: class Param_None (gdb.Parameter): def get_set_string (self): val = "on" if (self.value == False): val = "off" return "Test Parameter has been set to " + val def __init__ (self, name): super (Param_None, self).__init__ (name, gdb.COMMAND_DATA, gdb.PARAM_BOOLEAN) self._value = True Param_None ('param-none') Now in GDB we see this: (gdb) help set param-none This command is not documented. This command is not documented. That's not great, the duplicated text looks a bit weird. If we drop different parts we get different results. Here's what we get if the user drops the set_doc and show_doc attributes: (gdb) help set param-doc This command is not documented. This is the class documentation string. That kind of sucks, we say it's undocumented, then proceed to print the documentation. Finally, if we drop the class documentation but keep the set_doc and show_doc: (gdb) help set param-set-show Set the state of this parameter This command is not documented. That seems OK. So, I think there's room for improvement. With this patch, for the four cases above we now see this: # All values provided by the user, no change in this case: (gdb) help set param-all Set the state of this parameter This is the class documentation string. # Nothing provided by the user, the first string is now different: (gdb) help set param-none Set the current value of 'param-none'. This command is not documented. # Only the class documentation is provided, the first string is # changed as in the previous case: (gdb) help set param-doc Set the current value of 'param-doc'. This is the class documentation string. # Only the set_doc and show_doc are provided, this case is unchanged # from before the patch: (gdb) help set param-set-show Set the state of this parameter This command is not documented. The one place where this change might be considered a negative is when dealing with prefix commands. If we create a prefix command but don't supply the set_doc / show_doc strings, then this is what we saw before my patch: (gdb) python Param_None ('print param-none') (gdb) help set print set print, set pr, set p Generic command for setting how things print. List of set print subcommands: ... snip ... set print param-none -- This command is not documented. ... snip ... And after my patch: (gdb) python Param_None ('print param-none') (gdb) help set print set print, set pr, set p Generic command for setting how things print. List of set print subcommands: ... snip ... set print param-none -- Set the current value of 'print param-none'. ... snip ... This seems slightly less helpful than before, but I don't think its terrible. Additionally, I've changed what we print when the get_show_string method is not provided in Python. Back when gdb.Parameter was first added to GDB, we didn't provide a show function when registering the internal command object within GDB. As a result, GDB would make use of its "magic" mangling of the show_doc string to create a sentence that would display the current value (see deprecated_show_value_hack in cli/cli-setshow.c). However, when we added support for the get_show_string method to gdb.Parameter, there was an attempt to maintain backward compatibility by displaying the show_doc string with the current value appended, see get_show_value in py-param.c. Unfortunately, this isn't anywhere close to what deprecated_show_value_hack does, and the results are pretty poor, for example, this is GDB before my patch: (gdb) show param-none This command is not documented. off I think we can all agree that this is pretty bad. After my patch, we how show this: (gdb) show param-none The current value of 'param-none' is "off". Which at least is a real sentence, even if it's not very informative. This patch does change the way that the Python API behaves slightly, but only in the cases when the user has missed providing GDB with some information. In most cases I think the new behaviour is a lot better, there's the one case (noted above) which is a bit iffy, but I think is still OK. I've updated the existing gdb.python/py-parameter.exp test to cover the modified behaviour. Finally, I've updated the documentation to (I hope) make it clearer how the various bits of help text come together. 2022-01-26 Andrew Burgess gdb/python: add gdb.history_count function Add a new function gdb.history_count to the Python api, this function returns an integer, the number of items in GDB's value history. This is useful if you want to pull items from the history by their absolute number, for example, if you wanted to show a complete history list. Previously we could figure out how many items are in the history list by trying to fetch the items, and then catching the exception when the item is not available, but having this function seems nicer. 2022-01-26 Tom Tromey Remove unused declaration This removes an unused declaration from top.h. This type is not defined anywhere. 2022-01-26 Simon Marchi gdb: convert maintenance target-async and target-non-stop settings to callbacks This simplifies things a bit, as we don't need two variables and think about reverting target_async_permitted_1 and target_non_stop_enabled_1 values if we can't change the setting. Change-Id: I36acab045dacf02ae1988486cfdb27c1dff309f6 2022-01-26 Keith Seitz Reference array of structs instead of first member during memcpy aarch64-tdep.c defines the following macro: #define MEM_ALLOC(MEMS, LENGTH, RECORD_BUF) \ do \ { \ unsigned int mem_len = LENGTH; \ if (mem_len) \ { \ MEMS = XNEWVEC (struct aarch64_mem_r, mem_len); \ memcpy(&MEMS->len, &RECORD_BUF[0], \ sizeof(struct aarch64_mem_r) * LENGTH); \ } \ } \ while (0) This is simlpy allocating a new array and copying it. However, for the destination address, it is actually copying into the first member of the first element of the array (`&MEMS->len"). This elicits a warning with GCC 12: ../../binutils-gdb/gdb/aarch64-tdep.c: In function ‘int aarch64_process_record(gdbarch*, regcache*, CORE_ADDR)’: ../../binutils-gdb/gdb/aarch64-tdep.c:3711:23: error: writing 16 bytes into a region of size 8 [-Werror=stringop-overflow=] 3711 | memcpy(&MEMS->len, &RECORD_BUF[0], \ | ^ ../../binutils-gdb/gdb/aarch64-tdep.c:4394:3: note: in expansion of macro ‘MEM_ALLOC’ 4394 | MEM_ALLOC (aarch64_insn_r->aarch64_mems, aarch64_insn_r->mem_rec_count, | ^~~~~~~~~ ../../binutils-gdb/gdb/aarch64-tdep.c:3721:12: note: destination object ‘aarch64_mem_r::len’ of size 8 3721 | uint64_t len; /* Record length. */ | ^~~ The simple fix is to reference the array, `MEMS' as the destination of the copy. Tested by rebuilding. # Please enter the commit message for your changes. Lines starting # with '#' will be kept; you may remove them yourself if you want to. # An empty message aborts the commit. # # Date: Tue Jan 25 08:28:32 2022 -0800 # # On branch master # Your branch is ahead of 'origin/master' by 1 commit. # (use "git push" to publish your local commits) # # Changes to be committed: # modified: aarch64-tdep.c # 2022-01-26 Simon Marchi gdb: add string_file::release method A common pattern for string_file is to want to move out the internal string buffer, because it is the result of the computation that we want to return. It is the reason why string_file::string returns a non-const reference, as explained in the comment. I think it would make sense to have a dedicated method for that instead and make string_file::string return a const reference. This allows removing the explicit std::move in the typical case. Note that compile_program::compute was missing a move, meaning that the resulting string was copied. With the new version, it's not possible to forget to move. Change-Id: Ieaefa35b73daa7930b2f3a26988b6e3b4121bb79 2022-01-26 Tom Tromey Add a way to temporarily set a gdb parameter from Python It's sometimes useful to temporarily set some gdb parameter from Python. Now that the 'endian' crash is fixed, and now that the current language is no longer captured by the Python layer, it seems reasonable to add a helper function for this situation. This adds a new gdb.with_parameter function. This creates a context manager which temporarily sets some parameter to a specified value. The old value is restored when the context is exited. This is most useful with the Python "with" statement: with gdb.with_parameter('language', 'ada'): ... do Ada stuff This also adds a simple function to set a parameter, gdb.set_parameter, as suggested by Andrew. This is PR python/10790. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=10790 2022-01-26 Tom Tromey Fix another crash with gdb parameters in Python While looking into the language-capturing issue, I found another way to crash gdb using parameters from Python: (gdb) python print(gdb.parameter('endian')) (This is related to PR python/12188, though this patch isn't going to fix what that bug is really about.) The problem here is that the global variable that underlies the "endian" parameter is initialized to NULL. However, that's not a valid value for an "enum" set/show parameter. My understanding is that, in gdb, an "enum" parameter's underlying variable must have a value that is "==" (not just strcmp-equal) to one of the values coming from the enum array. This invariant is relied on in various places. I started this patch by fixing the problem with "endian". Then I added some assertions to add_setshow_enum_cmd to try to catch other problems of the same type. This patch fixes all the problems that I found. I also looked at all the calls to add_setshow_enum_cmd to ensure that they were all included in the gdb I tested. I think they are: there are no calls in nat-* files, or in remote-sim.c; and I was trying a build with all targets, Python, and Guile enabled. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=12188 2022-01-26 Tom Tromey Change how Python architecture and language are handled Currently, gdb's Python layer captures the current architecture and language when "entering" Python code. This has some undesirable effects, and so this series changes how this is handled. First, there is code like this: gdbpy_enter enter_py (python_gdbarch, python_language); This is incorrect, because both of these are NULL when not otherwise assigned. This can cause crashes in some cases -- I've added one to the test suite. (Note that this crasher is just an example, other ones along the same lines are possible.) Second, when the language is captured in this way, it means that Python code cannot affect the current language for its own purposes. It's reasonable to want to write code like this: gdb.execute('set language mumble') ... stuff using the current language gdb.execute('set language previous-value') However, this won't actually work, because the language is captured on entry. I've added a test to show this as well. This patch changes gdb to try to avoid capturing the current values. The Python concept of the current gdbarch is only set in those few cases where a non-default value is computed or needed; and the language is not captured at all -- instead, in the cases where it's required, the current language is temporarily changed. 2022-01-26 H.J. Lu bfd: Make bfd.stamp depend on source bfd.texi Make bfd.stamp depend on source bfd.texi to avoid regenerating doc/bfd.info for each make run. PR binutils/28807 * Makefile.in: Regenerate. * doc/local.mk (%D%/bfd.stamp): Depend on $(srcdir)/%D%/bfd.texi. 2022-01-26 H.J. Lu ld: Rewrite lang_size_relro_segment_1 1. Compute the desired PT_GNU_RELRO segment base and find the maximum section alignment of sections starting from the PT_GNU_RELRO segment. 2. Find the first preceding load section. 3. Don't add the 1-page gap between the first preceding load section and the relro segment if the maximum page size >= the maximum section alignment. Align the PT_GNU_RELRO segment first. Subtract the maximum page size if therer is still a 1-page gap. PR ld/28743 PR ld/28819 * ldlang.c (lang_size_relro_segment_1): Rewrite. * testsuite/ld-x86-64/pr28743-1.d: New file. * testsuite/ld-x86-64/pr28743-1.s: Likewise. * testsuite/ld-x86-64/x86-64.exp: Run pr28743-1. 2022-01-26 Lancelot SIX gdb/testsuite: Ensure constant test name in gdb.base/break-interp.exp When running the testsuite, I have lines similar to the following in the gdb.sum file: ~~~ PASS: gdb.base/break-interp.exp: ldprelink=NO: ldsepdebug=NO: first backtrace: p /x 0x7f283d2f0fd1 ... PASS: gdb.base/break-interp.exp: ldprelink=NO: ldsepdebug=NO: binprelink=NO: binsepdebug=NO: binpie=NO: INNER: first backtrace: p /x 0x7f00de0317a5 ... ~~~ The address part of the command might change between execution of the test, which adds noise to a diff between two .sum files. This patch changes to test name to "p /x $pc" in order to have constant test name. Tested on x86_64-Linux. Change-Id: I973c1237a084dd6d424276443cbf0920533c9a21 2022-01-26 GDB Administrator Automatic date update in version.in 2022-01-25 Tom Tromey Always print the "host libthread-db" message to stdout linux-thread-db.c has a bit of unusual code that unconditionally prints a message, but decides whether to print to gdb_stdout or gdb_stdlog based on a debug flag. It seems better to me to simply always print this; and this is the only spot in gdb where we conditionally pass gdb_stdout to one of the f*_unfiltered functions. 2022-01-25 Tom Tromey Reduce explicit use of gdb_stdout In an earlier version of the pager rewrite series, it was important to audit unfiltered output calls to see which were truly necessary. This is no longer necessary, but it still seems like a decent cleanup to change calls to avoid explicitly passing gdb_stdout. That is, rather than using something like fprintf_unfiltered with gdb_stdout, the code ought to use plain printf_unfiltered instead. This patch makes this change. I went ahead and converted all the _filtered calls I could find, as well, for the same clarity. 2022-01-25 Tom Tromey Sent timing stats to gdb_stdlog This changes the time / space / symtab per-command statistics code to send its output to gdb_stdlog rather than gdb_stdout. This seems slightly more correct to me. Send some error output to gdb_stderr This changes some code to send some error messages to gdb_stderr rather than gdb_stdout. 2022-01-25 Klaus Ziegler Fix a probem building the binutils on SPARC/amd64 PR 28816 * elf/common.h (AT_SUN_HWCAP): Make definition conditional. 2022-01-25 H.J. Lu bfd: Regenerate Makefile.in * Makefile.in: Regenerate. 2022-01-25 Mike Frysinger gold: drop old cygnus install hack The gold subdir doesn't actually have a manual, so this hack doesn't do anything. Plus the automake cygnus option was removed years ago by Simon in d0ac1c44885daf68f631befa37e ("Bump to autoconf 2.69 and automake 1.15.1"). So delete it here. gas: drop old cygnus install hack This was needed when gas was using the automake cygnus option, but this was removed years ago by Simon in d0ac1c44885daf68f631befa37e ("Bump to autoconf 2.69 and automake 1.15.1"). So delete it here. The info pages are already & still installed by default w/out it. 2022-01-25 GDB Administrator Automatic date update in version.in 2022-01-24 H.J. Lu bfd: Update doc/local.mk PR binutils/28807 * Makefile.in: Regenerate. * doc/local.mk (AM_MAKEINFOFLAGS): Add -I "$(srcdir)/%D%" -I %D%. (TEXI2DVI): New. (%D%/bfd.texi): Removed. (doc/bfd/index.html): Remove -I$(srcdir). Replace bfd.texi with %D%/bfd.texi. 2022-01-24 Roland McGrath bfd/doc: Fix racy build failure from missing mkdir bfd/ * doc/local.mk (%D%/bfdver.texi): Add mkdir command. 2022-01-24 Martin Sebor Fix a proble building the libiberty library with gcc-12. PR 28779 * regex.c: Suppress -Wuse-after-free. 2022-01-24 Andrew Burgess gdb/doc: improve description for Window.click on Python TUI windows The description of the Window.click method doesn't mention where the coordinates are anchored (it's the top left corner). This minor tweak just mentions this point. 2022-01-24 Nick Clifton Update Bulgarian, French, Romaniam and Ukranian translation for some of the sub-directories 2022-01-24 GDB Administrator Automatic date update in version.in 2022-01-23 Tom Tromey Simplify some Rust expression-evaluation code A few Rust operations do a bit of work in their 'evaluate' functions and then call another function -- but are also the only caller. This patch simplifies this code by removing the extra layer. Tested on x86-64 Fedora 34. I'm checking this in. 2022-01-23 H.J. Lu bfd: Partially revert commit 0e3839bde6f Partially revert commit 0e3839bde6f93e1e3eefce815be3636e3d81054d Author: H.J. Lu Date: Sun Jan 23 07:29:27 2022 -0800 bfd: Properly install library and header files PR binutils/28807 * Makefile.am: Revert bfdlib_LTLIBRARIES and bfdinclude_HEADERS changes. * Makefile.in: Regenerate. 2022-01-23 H.J. Lu bfd: Properly install library and header files Rename bfdlib_LTLIBRARIES and bfdinclude_HEADERS to lib_LTLIBRARIES and include_HEADERS to fix the missing installed library and header files in bfd caused by commit bd32be01c997f686ab0b53f0640eaa0aeb61fbd3 Author: Mike Frysinger Date: Fri Dec 3 00:23:20 2021 -0500 bfd: merge doc subdir up a level PR binutils/28807 * Makefile.am (bfdlib_LTLIBRARIES): Renamed to ... (lib_LTLIBRARIES): This. (bfdinclude_HEADERS): Renamed to ... (include_HEADERS): This. * Makefile.in: Regenerate. * doc/local.mk (install): Removed. 2022-01-23 H.J. Lu Regenerate Makefile.in files with automake 1.15.1 Regenerate Makefile.in files with the unmodified automake 1.15.1 to remove runstatedir = @runstatedir@ bfd/ * Makefile.in: Regenerate. binutils/ * Makefile.in: Regenerate. gas/ * Makefile.in: Regenerate. gold/ * Makefile.in: Regenerate. * testsuite/Makefile.in: Likewise. gprof/ * Makefile.in: Regenerate. ld/ * Makefile.in: Regenerate. opcodes/ * Makefile.in: Regenerate. 2022-01-23 H.J. Lu Regenerate configure files with autoconf 2.69 Regenerate configure files with the unmodified autoconf 2.69 to remove --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run] bfd/ * configure: Regenerate. binutils/ * configure: Regenerate. gas/ * configure: Regenerate. gold/ * configure: Regenerate. gprof/ * configure: Regenerate. ld/ * configure: Regenerate. opcodes/ * configure: Regenerate. 2022-01-23 GDB Administrator Automatic date update in version.in 2022-01-22 Mike Frysinger bfd: merge doc subdir up a level This avoids a recursive make into the doc subdir and speeds up the build slightly. It also allows for more parallelism. bfd: rename core.texi to corefile.texi This is a generated file name from a correspondingly named C file. Rename it to avoid unique build rules since there's no difference to the generated manual. bfd: replace doc header generation with pattern rules This unifies boilerplate rules for most files with pattern rules. 2022-01-22 Martin Storsj? Allow inferring tmp_prefix from the dll name from a def file. 2022-01-22 Alexander von Gluck IV Adjust default page sizes for haiku arm. * configure.tgt (arm-haiku): Fix typo. * emulparams/armelf_haiku.su (MAXPAGESIZE): Use the default value. (COMMONPAGESIZE): Likewise. 2022-01-22 Nick Clifton Update release makeing script with new release numbers Change version number to 2.38.50 and regenerate files Add markers for 2.38 branch 2022-01-22 Lifang Xia RISC-V: create new frag after alignment. PR 28793: The alignment may be removed in linker. We need to create new frag after alignment to prevent the assembler from computing static offsets. gas/ * config/tc-riscv.c (riscv_frag_align_code): Create new frag. 2022-01-22 GDB Administrator Automatic date update in version.in 2022-01-21 Simon Marchi gdb: include gdbsupport/buildargv.h in ser-mingw.c Fixes: CXX ser-mingw.o /home/simark/src/binutils-gdb/gdb/ser-mingw.c: In function ‘int pipe_windows_open(serial*, const char*)’: /home/simark/src/binutils-gdb/gdb/ser-mingw.c:870:3: error: ‘gdb_argv’ was not declared in this scope 870 | gdb_argv argv (name); | ^~~~~~~~ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28802 Change-Id: I7f3e8ec5f9ca8582d587545fdf6b69901259f199 2022-01-21 Nick Clifton Updated Serbian translation for the ld sub-directory 2022-01-21 Andrew Burgess gdb/doc: fill in two missing @r I noticed two places in the docs where we appear to be missing @r. makeinfo seems to do the correct things despite these being missing (at least, I couldn't see any difference in the pdf or info output), but it doesn't hurt to have the @r in place. 2022-01-21 Mike Frysinger drop old unused stamp-h.in file This was needed by ancient versions of automake, but that hasn't been the case since at least automake-1.5, so punt this from the tree. 2022-01-21 Simon Marchi gdbsupport/gdb_regex.cc: replace defs.h include with common-defs.h This was forgotten when gdb_regex was moved from gdb to gdbsupport. Change-Id: I73b446f71861cabbf7afdb7408ef9d59fa64b804 2022-01-21 GDB Administrator Automatic date update in version.in 2022-01-20 Tom Tromey Avoid bad breakpoints with --gc-sections We found a case where --gc-sections can cause gdb to set an invalid breakpoint. In the included test case, gdb will set a breakpoint with two locations, one of which is 0x0. The code in lnp_state_machine::check_line_address is intended to filter out this sort of problem, but in this case, the entire CU is empty, causing unrelocated_lowpc==0x0 -- which circumvents the check. It seems to me that if a CU is empty like this, then it is ok to simply ignore the line table, as there won't be any locations anyway. 2022-01-20 GDB Administrator Automatic date update in version.in 2022-01-19 Maciej W. Rozycki Add `set print array-indexes' tests for C/C++ arrays Add `set print array-indexes' tests for C/C++ arrays, complementing one for Fortran arrays. 2022-01-19 Maciej W. Rozycki Respect `set print array-indexes' with Fortran arrays Add `set print array-indexes' handling for Fortran arrays. Currently the setting is ignored and indices are never shown. Keep track of the most recent index handled so that any outstanding repeated elements printed when the limit set by `set print elements' is hit have the correct index shown. Output now looks like: (gdb) set print array-indexes on (gdb) print array_1d $1 = ((-2) = 1, (-1) = 1, (0) = 1, (1) = 1, (2) = 1) (gdb) set print repeats 4 (gdb) set print elements 12 (gdb) print array_2d $2 = ((-2) = ((-2) = 2, ) (-1) = ((-2) = 2, ) (0) = ((-2) = 2, (-1) = 2, ...) ...) (gdb) for a 5-element vector and a 5 by 5 array filled with the value of 2. 2022-01-19 Maciej W. Rozycki Add `set print repeats' tests for C/C++ arrays Add `set print repeats' tests for C/C++ arrays, complementing one for Fortran arrays and covering the different interpretation of the `set print elements' setting in particular where the per-dimension count of the elements handled is matched against the trigger rather than the total element count as with Fortran arrays. 2022-01-19 Maciej W. Rozycki Respect `set print repeats' with Fortran arrays Implement `set print repeats' handling for Fortran arrays. Currently the setting is ignored and always treated as if no limit was set. Unlike the generic array walker implemented decades ago the Fortran one is a proper C++ class. Rather than trying to mimic the old walker then, which turned out a bit of a challenge where interacting with the `set print elements' setting, write it entirely from scratch, by adding an extra specialization handler method for processing dimensions other than the innermost one and letting the specialization class call the `walk_1' method from the handler as it sees fit. This way repeats can be tracked and the next inner dimension recursed into as a need arises only, or unconditionally in the base class. Keep track of the dimension number being handled in the class rather as a parameter to the walker so that it does not have to be passed across by the specialization class. Use per-dimension element count tracking, needed to terminate processing early when the limit set by `set print elements' is hit. This requires extra care too where the limit triggers exactly where another element that is a subarray begins. In that case rather than recursing we need to terminate processing or lone `(...)' would be printed. Additionally if the skipped element is the last one in the current dimension we need to print `...' by hand, because `continue_walking' won't print it at the upper level, because it can see the last element has already been taken care of. Preserve the existing semantics of `set print elements' where the total count of the elements handled is matched against the trigger level which is unlike with the C/C++ array printer where the per-dimension element count is used instead. Output now looks like: (gdb) set print repeats 4 (gdb) print array_2d $1 = ((2, ) ) (gdb) set print elements 12 (gdb) print array_2d $2 = ((2, ) (2, ) (2, 2, ...) ...) (gdb) for a 5 by 5 array filled with the value of 2. Amend existing test cases accordingly that rely on the current incorrect behavior and explicitly request that there be no limit for printing repeated elements there. Add suitable test cases as well covering sliced arrays in particular. Co-Authored-By: Andrew Burgess 2022-01-19 John Baldwin fbsd-nat: Add include for gdb_argv. 2022-01-19 Alan Modra PowerPC64 DT_RELR ELFv1 More fun with R_PPC64_NONE found in .opd. Fixed by the allocate_dynrelocs and ppc64_elf_size_dynamic_sections changes, and since we are doing ifunc, opd and SYMBOL_REFERENCES_LOCAL tests later, don't duplicate that work in check_relocs. * elf64-ppc.c (ppc64_elf_check_relocs): Remove opd and ifunc conditions for rel_count. (dec_dynrel_count): Likewise. (allocate_dynrelocs): Test for opd and ifunc when allocating relative relocs. (ppc64_elf_size_dynamic_sections): Likewise. 2022-01-19 Alan Modra PowerPC64 DT_RELR local PLT Similarly to the local GOT case. * elf64-ppc.c (ppc64_elf_size_dynamic_sections): Don't allocate space for PLT relocs against local syms when enable_dt_relr. 2022-01-19 Alan Modra PowerPC64 DT_RELR local GOT Fixes another case where we end up with superfluous R_PPC64_NONE. * elf64-ppc.c (ppc64_elf_size_dynamic_sections): Don't allocate space for GOT relocs against non-TLS local syms when enable_dt_relr. (ppc64_elf_layout_multitoc): Likewise. 2022-01-19 GDB Administrator Automatic date update in version.in 2022-01-18 Alan Modra Re: PowerPC64 DT_RELR HJ: "There are 238 R_PPC64_NONEs in libc.so.6 alone." Indeed, let's make them go away. I had the SYMBOL_REFERENCES_LOCAL test in the wrong place. check_relocs is too early to know whether a symbol is dynamic in a shared library. Lots of glibc symbols are made local by version script, but that doesn't happen until size_dynamic_sections. * elf64-ppc.c (ppc64_elf_check_relocs): Don't count relative relocs here depending on SYMBOL_REFERENCES_LOCAL. (dec_dynrel_count): Likewise. (allocate_dynrelocs): Do so here instead. 2022-01-18 Tom Tromey Fix the remote-sim.c build My earlier patch to move gdb_argv broke the remote-sim.c build. This patch fixes the bug. I'm checking it in. 2022-01-18 Simon Marchi gdbserver: introduce remote_debug_printf Add remote_debug_printf, and use it for all debug messages controlled by remote_debug. Change remote_debug to be a bool, which is trivial in this case. Change-Id: I90de13cb892faec3830047b571661822b126d6e8 2022-01-18 Simon Marchi gdbserver: introduce threads_debug_printf, THREADS_SCOPED_DEBUG_ENTER_EXIT Add the threads_debug_printf and THREADS_SCOPED_DEBUG_ENTER_EXIT, which use the logging infrastructure from gdbsupport/common-debug.h. Replace all debug_print uses that are predicated by debug_threads with threads_dethreads_debug_printf. Replace uses of the debug_enter and debug_exit macros with THREADS_SCOPED_DEBUG_ENTER_EXIT, which serves essentially the same purpose, but allows showing what comes between the enter and the exit in an indented form. Note that "threads" debug is currently used for a bit of everything in GDBserver, not only threads related stuff. It should ideally be cleaned up and separated logically as is done in GDB, but that's out of the scope of this patch. Change-Id: I2d4546464462cb4c16f7f1168c5cec5a89f2289a 2022-01-18 Simon Marchi gdbserver: turn debug_threads into a boolean debug_threads is always used as a boolean. Except in ax.cc and tracepoint.cc. These files have their own macros that use debug_threads, and have a concept of verbosity level. But they both have a single level, so it's just a boolean in the end. Remove this concept of level. If we ever want to re-introduce it, I think it will be better implemented in a more common location. Change debug_threads to bool and adjust some users that were treating it as an int. Change-Id: I137f596eaf763a08c977dd74417969cedfee9ecf 2022-01-18 Tom Tromey Simplify Ada catchpoints All the Ada catchpoints use the same breakpoint_ops contents, because the catchpoint itself records its kind. This patch simplifies the code by removing the redundant ops structures. Move "catch exec" to a new file The "catch exec" code is reasonably self-contained, and so this patch moves it out of breakpoint.c (the second largest source file in gdb) and into a new file, break-catch-exec.c. Move "catch fork" to a new file The "catch fork" code is reasonably self-contained, and so this patch moves it out of breakpoint.c (the second largest source file in gdb) and into a new file, break-catch-fork.c. Unify "catch fork" and "catch vfork" I noticed that "catch fork" and "catch vfork" are nearly identical. This patch simplifies the code by unifying these two cases. Move gdb_regex to gdbsupport This moves the gdb_regex convenience class to gdbsupport. Introduce gdb-hashtab module in gdbsupport gdb has some extensions and helpers for working with the libiberty hash table. This patch consolidates these and moves them to gdbsupport. Move gdb obstack code to gdbsupport This moves the gdb-specific obstack code -- both extensions like obconcat and obstack_strdup, and things like auto_obstack -- to gdbsupport. Move gdb_argv to gdbsupport This moves the gdb_argv class to a new header in gdbsupport. Simplify event_location_probe event_location_probe currently stores two strings, but really only needs one. This patch simplifies it and removes some unnecessary copies as well. Use std::string in event_location This changes event_location to use std::string, removing some manual memory management, and an unnecessary string copy. Split event_location into subclasses event_location uses the old C-style discriminated union approach. However, it's better to use subclassing, as this makes the code clearer and removes some chances for error. This also enables future cleanups to avoid manual memory management and copies. Remove EL_* macros from location.c This patch removes the old-style EL_* macros from location.c. This cleans up the code by itself, IMO, but also enables further cleanups in subsequent patches. Boolify explicit_to_string_internal This changes explicit_to_string_internal to use 'bool' rather than 'int'. Remove a use of xfree in location.c This small cleanup removes a use of xfree from location.c, by switching to unique_xmalloc_ptr. One function is only used in location.c, so it is made static. And, another function is changed to avoid a copy. 2022-01-18 Simon Marchi gdb: use ptid_t::to_string instead of target_pid_to_str in debug statements Same idea as 0fab79556484 ("gdb: use ptid_t::to_string in infrun debug messages"), but throughout GDB. Change-Id: I62ba36eaef29935316d7187b9b13d7b88491acc1 2022-01-18 Andrew Burgess gdb: preserve `|` in connection details string Consider this GDB session: $ gdb -q (gdb) target remote | gdbserver - ~/tmp/hello.x Remote debugging using | gdbserver - ~/tmp/hello.x ... snip ... (gdb) info connections Num What Description * 1 remote gdbserver - ~/tmp/hello.x Remote target using gdb-specific protocol (gdb) python conn = gdb.selected_inferior().connection (gdb) python print(conn.details) gdbserver - ~/tmp/hello.x (gdb) I think there are two things wrong here, first in the "What" column of the 'info connections' output, I think the text should be: remote | gdbserver - ~/tmp/hello.x to correctly show the user how the connection was established. And in a similar fashion, I think that the `details` string of the gdb.TargetConnection object should be: | gdbserver - ~/tmp/hello.x This commit makes this change. Currently the '|' is detected and removed in gdb/serial.c. The string passed to the pipe_ops structure (from gdb/ser-pipe.c), doesn't then, contain the `|`, this is instead implied by the fact that it is a pipes based implementation of the serial_ops interface. After this commit we still detect the `|` in gdb/serial.c, but we now store the full string (including the `|`) in the serial::name member variable. For pipe based serial connections, this name is only used for displaying the two fields I mention above, and in pipe_open (from gdb/ser-pipe.c), and in pipe_open, we now know to skip over the `|`. The benefit I see from this change is that GDB's output now more accurately reflects the commands used to start a target, thus making it easier for a user to understand what is going on. 2022-01-18 Tiezhu Yang gdb: testsuite: print explicit test result for gdb.base/dfp-test.exp In the current code, if decimal floating point is not supported for this target, there is no binary file dfp-test, and also there is no test result after execute the following commands: $ make check-gdb TESTS="gdb.base/dfp-test.exp" $ grep error gdb/testsuite/gdb.log /home/loongson/gdb.git/gdb/testsuite/gdb.base/dfp-test.c:39:1: error: decimal floating point not supported for this target [...] $ cat gdb/testsuite/gdb.sum [...] Running target unix Running /home/loongson/gdb.git/gdb/testsuite/gdb.base/dfp-test.exp ... === gdb Summary === [...] With this patch: $ make check-gdb TESTS="gdb.base/dfp-test.exp" $ cat gdb/testsuite/gdb.sum [...] Running target unix Running /home/loongson/gdb.git/gdb/testsuite/gdb.base/dfp-test.exp ... UNSUPPORTED: gdb.base/dfp-test.exp: decimal floating point not supported for this target. === gdb Summary === # of unsupported tests 1 [...] 2022-01-18 Simon Marchi bfd/elf64-ppc.c: fix clang -Wbitwise-instead-of-logical warning in ppc64_elf_check_init_fini I see this error with clang-14: CC elf64-ppc.lo /home/smarchi/src/binutils-gdb/bfd/elf64-ppc.c:13131:11: error: use of bitwise '&' with boolean operands [-Werror,-Wbitwise-instead-of-logical] return (check_pasted_section (info, ".init") ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix by replacing & with &&. But given that the check_pasted_section function has side-effects and we want to make sure both calls are made, assign to temporary variables before evaluating the `&&`. Change-Id: I849e1b2401bea5f4d8ef3ab9af99ba9e3ef42490 2022-01-18 Alan Modra PR28029, debuginfod tests binutils/NEWS says of the change in --process-links semantics: If other debug section display options are also enabled (eg --debug-dump=info) then the contents of matching sections in both the main file and the separate debuginfo file *will* be displayed. This is because in most cases the debug section will only be present in one of the files. Implying that debug info is dumped without --process-links. Indeed that appears to be the case for readelf. This does the same for objdump. PR 28029 * objdump.c (dump_bfd): Do not exit early when !is_mainfile && !processlinks, instead just exclude non-debug output. (dump_dwarf): Add is_mainfile parameter and pass to dump_dwarf_section. (dump_dwarf_section): Only display debug sections when !is_mainfile and !process_links. 2022-01-18 Alan Modra Check thin archive element file size against archive header Makes it a little less likely for someone to break their thin archives. * archive.c (_bfd_get_elt_at_filepos): Check thin archive element file size. 2022-01-18 Alan Modra lang_size_relro_segment tidy This function has seen too many minimal change style edits. No functional changes in this patch. * ldlang.c (lang_size_relro_segment): Tidy. 2022-01-18 Alan Modra PowerPC64 DT_RELR PowerPC64 takes a more traditional approach to DT_RELR than x86. Count relative relocs in check_relocs, allocate space for them and output in the usual places but not doing so when enable_dt_relr. DT_RELR is sized in the existing ppc stub relaxation machinery, run via the linker's ldemul_after_allocation hook. DT_RELR is output in the same function that writes ppc stubs, run via ldemul_finish. This support should be considered experimental. bfd/ * elf64-ppc.c (struct ppc_local_dyn_relocs): Renamed from ppc_dyn_relocs. Add rel_count field. Update uses. (struct ppc_dyn_relocs): New. Replace all uses of elf_dyn_relocs. (struct ppc_link_hash_table): Add relr_alloc, relr_count and relr_addr. (ppc64_elf_copy_indirect_symbol): Merge rel_count. (ppc64_elf_check_relocs): Init rel_count for global and local syms. (dec_dynrel_count): Change r_info param to reloc pointer. Update all callers. Handle decrementing rel_count. (allocate_got): Don't allocate space for relative relocs when enable_dt_relr. (allocate_dynrelocs): Likewise. (ppc64_elf_size_dynamic_sections): Likewise. Handle srelrdyn. (ppc_build_one_stub): Don't emit relative relocs on .branch_lt. (compare_relr_address, append_relr_off): New functions. (got_and_plt_relr_for_local_syms, got_and_plt_relr): Likewise. (ppc64_elf_size_stubs): Size .relr.syn. (ppc64_elf_build_stubs): Emit .relr.dyn. (build_global_entry_stubs_and_plt): Don't output relative relocs when enable_dt_relr. (write_plt_relocs_for_local_syms): Likewise. (ppc64_elf_relocate_section): Likewise. binutils/ * testsuite/lib/binutils-common.exp (supports_dt_relr): Add powerpc64. ld/ * emulparams/elf64ppc.sh: Source dt-relr.sh. * testsuite/ld-elf/dt-relr-2b.d: Adjust for powerpc. * testsuite/ld-elf/dt-relr-2c.d: Likewise. * testsuite/ld-elf/dt-relr-2d.d: Likewise. * testsuite/ld-elf/dt-relr-2e.d: Likewise. 2022-01-18 Alan Modra tweak __ehdr_start visibility and flags for check_relocs bfd/ * elf-bfd.h (UNDEFWEAK_NO_DYNAMIC_RELOC): Test linker_def. ld/ * ldelf.c (ldelf_before_allocation): Don't force __ehdr_start local and hidden here.. * ldlang.c (lang_symbol_tweaks): ..do so here instead and set def_regular and linker_def for check_relocs. New function extracted from lang_process. 2022-01-18 GDB Administrator Automatic date update in version.in 2022-01-17 Nick Clifton Update the config.guess and config.sub files from the master repository and regenerate files. 2022-01-17 Sergey Belyashov Fix Z80 assembly failure. PR 28762 * app.c (do_scrub_chars): Correct handling when the symbol is not 'af'. 2022-01-17 Simon Marchi gdb/infrun: rename variable and move to more specific scope Move the "started" variable to the scope it's needed, and rename it to "step_over_started". Change-Id: I56f3384dbd328f55198063bb855edda10f1492a3 2022-01-17 Jan Beulich x86: adjust struct instr_info field types Now that this lives on the stack, let's have it be a little less wasteful in terms of space. Switch boolean fields to "bool" (also when this doesn't change their size) and also limit the widths of "rex", "rex_used", "op_ad", and "op_index". Do a little bit of re-ordering as well to limit the number of padding holes. x86: drop index16 field There's a single use on a generally infrequently taken code path. Put the necessary conditional there instead. x86: drop most Intel syntax register name arrays By making use of, in particular, oappend_maybe_intel() there's no need for this redundant set of static data. x86: fold variables in memory operand index handling There's no real need for the pseudo-boolean "haveindex" or for separate 32-bit / 64-bit index pointers. Fold them into a single "indexes" and set that uniformly to AT&T names, compensating by emitting the register name via oappend_maybe_intel(). x86: constify disassembler static data Now that the code is intended to be largely thread-safe, we'd better not have any writable static objects. 2022-01-17 GDB Administrator Automatic date update in version.in 2022-01-16 Joel Brobecker gdb/copyright.py: Do not update gdbsupport/Makefile.in This file is generated, so we should not modify it (any modification we make is going to be undone at the next re-generation anyway). 2022-01-16 GDB Administrator Automatic date update in version.in 2022-01-15 GDB Administrator Automatic date update in version.in 2022-01-14 Simon Marchi gdb.dlang/demangle.exp: update expected output for _D8demangle4testFnZv Since commit ce2d3708bc8b ("Synchronize binutils libiberty sources with gcc version."), I see this failure: demangle _D8demangle4testFnZv^M demangle.test(typeof(null))^M (gdb) FAIL: gdb.dlang/demangle.exp: _D8demangle4testFnZv The commit imported the commit 0e32a5aa8bc9 ("libiberty: Add support for D `typeof(*null)' types") from the gcc repository. That commit includes an update to libiberty/testsuite/d-demangle-expected, which updates a test for the exact same mangled name: _D8demangle4testFnZv -demangle.test(none) +demangle.test(typeof(null)) I don't know anything about D, but give that the change was made by Iain Buclaw, the D language maintainer, I trust him on that. Fix our test by updating the expected output in the same way. Note: it's not really useful to have all these D demangling tests in the GDB testsuite, since there are demangling tests in libiberty. We should consider removing them, but we first need to make sure that everything that is covered in gdb/testsuite/gdb.dlang/demangle.exp is also covered in libiberty/testsuite/d-demangle-expected. Change-Id: If2b290ea8367b8e1e0b90b20d4a6e0bee517952d 2022-01-14 Nils-Christian Kempke gdb/testsuite: enable __INTEL_LLVM_COMPILER preprocessor in get_compiler_info Intel Next Gen compiler defines preprocessor __INTEL_LLVM_COMPILER and provides version info in __clang_version__ e.g. value: 12.0.0 (icx 2020.10.0.1113). gdb/testsuite/ChangeLog: 2020-12-07 Abdul Basit Ijaz * lib/compiler.c: Add Intel next gen compiler pre-processor check. * lib/compiler.cc: Ditto. * lib/fortran.exp (fortran_main): Check Intel next gen compiler in test_compiler_info. 2022-01-14 Alan Modra PR28751 mbind2a / mbind2b regressions on powerpc*-linux include/ * bfdlink.h (struct bfd_link_info): Add commonpagesize_is_set. ld/ PR 28751 * emultempl/elf.em (handle_option): Set commonpagesize_is_set. * ldelf.c (ldelf_after_parse): Don't error when only one of -z max-page-size or -z common-page-size is given, correct the other value to make it sane. * testsuite/ld-elf/elf.exp (mbind2a, mbind2b): Do not pass -z max-page-size. 2022-01-14 Jan Beulich x86: drop ymmxmm_mode This enumerator is not used by any table entry. x86: share yet more VEX table entries with EVEX decoding On top of prior similar work more opportunities have appeared in the meantime. Note that this also happens to address the prior lack of decoding of EVEX.L'L for VMOV{L,H}P{S,D} and VMOV{LH,HL}PS. x86: consistently use scalar_mode for AVX512-FP16 scalar insns For some reason the original AVFX512F insns were not taken as a basis here, causing unnecessary divergence. While not an active issue, it is still relevant to note that OP_XMM() has special treatment of e.g. scalar_mode (marking broadcast as invalid). Such would better be consistent for all sufficiently similar insns. x86: record further wrong uses of EVEX.b For one EVEX.W set does not imply EVEX.b is uniformly valid. Reject it for modes which occur for insns allowing for EVEX.W to be set (noticed with VMOV{H,L}PD and VMOVDDUP, and only in AT&T mode, but not checked whether further insns would also have been impacted; I expect e.g. VCMPSD would have had the same issue). And then the present concept of broadcast makes no sense at all when the memory operand of an insn is the destination. 2022-01-14 Jan Beulich x86: reduce AVX512 FP set of insns decoded through vex_w_table[] Like for AVX512-FP16, there's not that many FP insns where going through this table is easier / cheaper than using suitable macros. Utilize %XS and %XD more to eliminate a fair number of table entries. While doing this I noticed a few anomalies. Where lines get touched / moved anyway, these are being addressed right here: - vmovshdup used EXx for its 2nd operand, thus displaying seemingly valid broadcast when EVEX.b is set with a memory operand; use EXEvexXNoBcst instead just like vmovsldup already does - vmovlhps used EXx for its 3rd operand, when all sibling entries use EXq; switch to EXq there for consistency (the two differ only for memory operands) 2022-01-14 Jan Beulich x86: reduce AVX512-FP16 set of insns decoded through vex_w_table[] Like already indicated during review of the original submission, there's really only very few insns where going through this table is easier / cheaper than using suitable macros. Utilize %XH more and introduce similar %XS and %XD (which subsequently can be used for further table size reduction). While there also switch to using oappend() in 'XH' macro processing. 2022-01-14 GDB Administrator Automatic date update in version.in 2022-01-13 H.J. Lu ld: Disable DT_RELR in some -z relro tests Disable DT_RELR in the following -z relro tests which don't expect DT_RELR in linker outputs. * testsuite/ld-i386/pr20830.d: Pass $NO_DT_RELR_LDFLAGS to ld. * testsuite/ld-x86-64/pr20830a-now.d: Likewise. * testsuite/ld-x86-64/pr20830a.d: Likewise. * testsuite/ld-x86-64/pr20830b-now.d: Likewise. * testsuite/ld-x86-64/pr20830b.d: Likewise. * testsuite/ld-x86-64/pr21038a-now.d: Likewise. * testsuite/ld-x86-64/pr21038a.d: Likewise. * testsuite/ld-x86-64/pr21038b-now.d: Likewise. * testsuite/ld-x86-64/pr21038c-now.d: Likewise. * testsuite/ld-x86-64/pr21038c.d: Likewise. 2022-01-13 H.J. Lu Reapply libiberty: Pass --plugin to AR and RANLIB Reapply the patch to detect GCC LTO plugin used for libiberty build to support LTO build in libiberty. * Makefile.in (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. (configure_deps): Depend on ../config/gcc-plugin.m4. * aclocal.m4: Include ../config/gcc-plugin.m4. * configure.ac: AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * configure: Regenerate. 2022-01-13 H.J. Lu elf: Remove the 1-page gap before the RELRO segment The existing RELRO scheme may leave a 1-page gap before the RELRO segment and align the end of the RELRO segment to the page size: [18] .eh_frame PROGBITS 408fa0 008fa0 005e80 00 A 0 0 8 [19] .init_array INIT_ARRAY 410de0 00fde0 000008 08 WA 0 0 8 [20] .fini_array FINI_ARRAY 410de8 00fde8 000008 08 WA 0 0 8 [21] .dynamic DYNAMIC 410df0 00fdf0 000200 10 WA 7 0 8 [22] .got PROGBITS 410ff0 00fff0 000010 08 WA 0 0 8 [23] .got.plt PROGBITS 411000 010000 000048 08 WA 0 0 8 Instead, we can remove the 1-page gap if the maximum page size >= the maximum section alignment: [18] .eh_frame PROGBITS 408fa0 008fa0 005e80 00 A 0 0 8 [19] .init_array INIT_ARRAY 40fde0 00fde0 000008 08 WA 0 0 8 [20] .fini_array FINI_ARRAY 40fde8 00fde8 000008 08 WA 0 0 8 [21] .dynamic DYNAMIC 40fdf0 00fdf0 000200 10 WA 7 0 8 [22] .got PROGBITS 40fff0 00fff0 000010 08 WA 0 0 8 [23] .got.plt PROGBITS 410000 010000 000048 08 WA 0 0 8 Because the end of the RELRO segment is always aligned to the page size and may not be moved, the RELRO segment size may be increased: [ 3] .dynstr STRTAB 000148 000148 000001 00 A 0 0 1 [ 4] .eh_frame PROGBITS 000150 000150 000000 00 A 0 0 8 [ 5] .init_array INIT_ARRAY 200150 000150 000010 08 WA 0 0 1 [ 6] .fini_array FINI_ARRAY 200160 000160 000010 08 WA 0 0 1 [ 7] .jcr PROGBITS 200170 000170 000008 00 WA 0 0 1 [ 8] .data.rel.ro PROGBITS 200180 000180 000020 00 WA 0 0 16 [ 9] .dynamic DYNAMIC 2001a0 0001a0 0001c0 10 WA 3 0 8 [10] .got PROGBITS 200360 000360 0002a8 00 WA 0 0 8 [11] .bss NOBITS 201000 000608 000840 00 WA 0 0 1 vs the old section layout: [ 3] .dynstr STRTAB 000148 000148 000001 00 A 0 0 1 [ 4] .eh_frame PROGBITS 000150 000150 000000 00 A 0 0 8 [ 5] .init_array INIT_ARRAY 200b48 000b48 000010 08 WA 0 0 1 [ 6] .fini_array FINI_ARRAY 200b58 000b58 000010 08 WA 0 0 1 [ 7] .jcr PROGBITS 200b68 000b68 000008 00 WA 0 0 1 [ 8] .data.rel.ro PROGBITS 200b70 000b70 000020 00 WA 0 0 16 [ 9] .dynamic DYNAMIC 200b90 000b90 0001c0 10 WA 3 0 8 [10] .got PROGBITS 200d50 000d50 0002a8 00 WA 0 0 8 [11] .bss NOBITS 201000 000ff8 000840 00 WA 0 0 1 But there is no 1-page gap. PR ld/28743 * ldlang.c (lang_size_relro_segment_1): Remove the 1-page gap before the RELRO segment if the maximum page size >= the maximum section alignment. * testsuite/ld-i386/pr20830.d: Adjusted. * testsuite/ld-s390/gotreloc_64-relro-1.dd: Likewise. * testsuite/ld-x86-64/pr14207.d: Likewise. * testsuite/ld-x86-64/pr18176.d: Likewise. * testsuite/ld-x86-64/pr20830a-now.d: Likewise. * testsuite/ld-x86-64/pr20830a.d: Likewise. * testsuite/ld-x86-64/pr20830b-now.d: Likewise. * testsuite/ld-x86-64/pr20830b.d: Likewise. * testsuite/ld-x86-64/pr21038a-now.d: Likewise. * testsuite/ld-x86-64/pr21038a.d: Likewise. * testsuite/ld-x86-64/pr21038b-now.d: Likewise. * testsuite/ld-x86-64/pr21038c-now.d: Likewise. * testsuite/ld-x86-64/pr21038c.d: Likewise. 2022-01-13 Nick Clifton Synchronize binutils libiberty sources with gcc version. +2021-12-30 Lancelot SIX + + * cp-demangle.c (d_clone_suffix): Support digits in clone tag + names. + * testsuite/demangle-expected: Check demangling of clone symbols + with digits in name. + +2021-12-16 H.J. Lu + + Revert: + 2021-12-16 H.J. Lu + + * Makefile.in (AR): Add @AR_PLUGIN_OPTION@ + (RANLIB): Add @RANLIB_PLUGIN_OPTION@. + (configure_deps): Depend on ../config/gcc-plugin.m4. + * configure.ac: AC_SUBST AR_PLUGIN_OPTION and + RANLIB_PLUGIN_OPTION. + * aclocal.m4: Regenerated. + * configure: Likewise. + +2021-12-15 H.J. Lu + + * Makefile.in (AR): Add @AR_PLUGIN_OPTION@ + (RANLIB): Add @RANLIB_PLUGIN_OPTION@. + (configure_deps): Depend on ../config/gcc-plugin.m4. + * configure.ac: AC_SUBST AR_PLUGIN_OPTION and + RANLIB_PLUGIN_OPTION. + * aclocal.m4: Regenerated. + * configure: Likewise. + +2021-11-29 Eric Gallager + + PR other/103021 + * Makefile.in: Use ETAGS variable in TAGS target. + * configure: Regenerate. + * configure.ac: Allow ETAGS variable to be overridden. + +2021-11-29 Andrew Pinski + + * make-temp-file.c (try_dir): Check to see if the dir + is actually a directory. + +2021-10-22 Eric Gallager + + PR other/102663 + * Makefile.in: Allow dvi-formatted documentation + to be installed. + +2021-10-17 Lu?s Ferreira + + PR d/102618 + * d-demangle.c (dlang_parse_qualified): Handle anonymous + symbols correctly. + * testsuite/d-demangle-expected: New tests to cover anonymous + symbols. + +2021-10-14 Lu?s Ferreira + + * testsuite/d-demangle-expected: Add test case for function literals. + +2021-10-14 Lu?s Ferreira + + * testsuite/d-demangle-expected: Add test cases for simple special + mangles. + +2021-10-12 Lu?s Ferreira + + * d-demangle.c (dlang_parse_qualified): Remove redudant parenthesis + around lhs and rhs of assignments. + +2021-10-01 Lu?s Ferreira + + * testsuite/d-demangle-expected: Add missing format for new test + +2021-09-23 Lu?s Ferreira + + * d-demangle.c (dlang_Type): Validate MANGLED is nonnull. + * testsuite/d-demangle-expected: New test. + +2021-09-23 Lu?s Ferreira + + * d-demangle.c (dlang_symbol_backref): Ensure strlen of + string is less than length computed by dlang_number. + +2021-09-01 Iain Sandoe * configure: Regenerate. + * configure.ac: Do not search for sbrk on Darwin. + * xmalloc.c: Do not declare sbrk unless it has been found + by configure. + +2021-08-29 Iain Buclaw + + * d-demangle.c (dlang_identifier): Skip over fake parent manglings. + * testsuite/d-demangle-expected: Add tests. + +2021-08-29 Iain Buclaw + + * d-demangle.c (dlang_parse_arrayliteral): Add 'info' parameter. + (dlang_parse_assocarray): Likewise. + (dlang_parse_structlit): Likewise. + (dlang_value): Likewise. Handle function literal symbols. + (dlang_template_args): Pass 'info' to dlang_value. + * testsuite/d-demangle-expected: Add new test. + +2021-08-29 Iain Buclaw + + * d-demangle.c (dlang_attributes): Handle typeof(*null). + (dlang_type): Likewise. Demangle 'n' as typeof(null). + * testsuite/d-demangle-expected: Update tests. + +2021-08-23 Iain Sandoe + + * simple-object-mach-o.c (simple_object_mach_o_write_segment): + Cast the first argument to set_32 as needed. -2021-07-03 Nick Clifton +2021-08-18 Iain Sandoe + * simple-object-mach-o.c (simple_object_mach_o_write_segment): + Arrange to swap the LTO index tables where needed. # Please enter the commit message for your changes. Lines starting 2022-01-13 Andrew Burgess gdb: don't use -Wmissing-prototypes with g++ This commit aims to not make use of -Wmissing-prototypes when compiling with g++. Use of -Wmissing-prototypes was added with this commit: commit a0761e34f054767de6d6389929d27e9015fb299b Date: Wed Mar 11 15:15:12 2020 -0400 gdb: enable -Wmissing-prototypes warning Because clang can provide helpful warnings with this flag. Unfortunately, g++ doesn't accept this flag, and will give this warning: cc1plus: warning: command line option ‘-Wmissing-prototypes’ is valid for C/ObjC but not for C++ In theory the fact that this flag is not supported should be detected by the configure check in gdbsupport/warning.m4, but for users of ccache, this check doesn't work due to a long standing ccache issue: https://github.com/ccache/ccache/issues/738 The ccache problem is that -W... options are reordered on the command line, and so -Wmissing-prototypes is seen before -Werror. Usually this doesn't matter, but the above warning (about the flag not being valid) is issued before the -Werror flag is processed, and so is not fatal. There have been two previous attempts to fix this that I'm aware of. The first is: https://sourceware.org/pipermail/gdb-patches/2021-September/182148.html In this attempt, instead of just relying on a compile to check if a flag is valid, the proposal was to both compile and link. As linking doesn't go through ccache, we don't suffer from the argument reordering problem, and the link phase will correctly fail when using -Wmissing-prototypes with g++. The configure script will then disable the use of this flag. This approach was rejected, and the suggestion was to only add the -Wmissing-prototypes flag if we are compiling with gcc. The second attempt, attempts this approach, and can be found here: https://sourceware.org/pipermail/gdb-patches/2021-November/183076.html This attempt only adds the -Wmissing-prototypes flag is the value of GCC is not 'yes'. This feels like it is doing the right thing, unfortunately, the GCC flag is really a 'is gcc like' flag, not a strict, is gcc check. As such, GCC is set to 'yes' for clang, which would mean the flag was not included for clang or gcc. The entire point of the original commit was to add this flag for clang, so clearly the second attempt is not sufficient either. In this new attempt I have added gdbsupport/compiler-type.m4, this file defines AM_GDB_COMPILER_TYPE. This macro sets the variable GDB_COMPILER_TYPE to either 'gcc', 'clang', or 'unknown'. In future the list of values might be extended to cover other compilers, if this is ever useful. I've then modified gdbsupport/warning.m4 to only add the problematic -Wmissing-prototypes flag if GDB_COMPILER_TYPE is not 'gcc'. I've tested this with both gcc and clang and see the expected results, gcc no longer attempts to use the -Wmissing-prototypes flag, while clang continues to use it. When compiling using ccache, I am no longer seeing the warning. 2022-01-13 Andrew Burgess gdb: add some extra debug information to attach_command While working on another patch I wanted to add some extra debug information to the attach_command function. This required me to add a new function to convert the thread_info::state variable to a string. The new debug might be useful to others, and the state to string function might be useful in other locations, so I thought I'd merge it. 2022-01-13 Alan Modra Re: gas: add visibility support using GNU syntax on XCOFF tc-ppc.c: In function 'ppc_comm': tc-ppc.c:4560:40: error: 'visibility' may be used uninitialized in this function [-Werror=maybe-uninitialized] With that fixed we hit lots of segfaults in the ld testsuite. PR 22085 bfd/ * xcofflink.c (xcoff_link_input_bfd): Don't segfault on NULL sym_hash. gas/ * config/tc-ppc.c (ppc_comm): Init visibility. 2022-01-13 Alan Modra dt-relr.exp --no-as-needed Otherwise the very simple test may not be linked with libc.so at all, and thus correctly have no version reference added. Causing failure of the dt-relr-glibc-1b.so test. * testsuite/ld-elf/dt-relr.exp: Link with --no-as-needed. 2022-01-13 Alan Modra Correct .relr.dyn nocombreloc script * scripttempl/elf.sc (.relr.dyn): Don't depend on $COMBRELOC. 2022-01-13 Alan Modra testsuite supports_dt_relr Tidy, and fix "FAIL: Build dt-relr-glibc-1b.so" on all non-x86 linux targets. binutils/ * binutils-common.exp (supports_dt_relr): New proc. ld/ * testsuite/config/default.exp (DT_RELR_LDFLAGS, NO_DT_RELR_LDFLAGS), (DT_RELR_CC_LDFLAGS, NO_DT_RELR_CC_LDFLAGS): Use supports_dt_relr. * testsuite/ld-elf/dt-relr.exp: Don't run unless supports_dt_relr. * testsuite/ld-elf/dt-relr-1a.d: Likewise. * testsuite/ld-elf/dt-relr-1b.d: Likewise. * testsuite/ld-elf/dt-relr-1c.d: Likewise. * testsuite/ld-elf/dt-relr-2a.d: Likewise. * testsuite/ld-elf/dt-relr-2b.d: Likewise. * testsuite/ld-elf/dt-relr-2c.d: Likewise. * testsuite/ld-elf/dt-relr-2d.d: Likewise. * testsuite/ld-elf/dt-relr-2e.d: Likewise. * testsuite/ld-elf/dt-relr-2f.d: Likewise. * testsuite/ld-elf/dt-relr-2g.d: Likewise. * testsuite/ld-elf/dt-relr-2h.d: Likewise. * testsuite/ld-elf/dt-relr-3a.d: Likewise. * testsuite/ld-elf/dt-relr-3b.d: Likewise. 2022-01-13 Alan Modra Don't use C++ comments in assembly It might seem to work, but only if '/' is a start of comment char. * testsuite/ld-elf/dt-relr-1.s: Use # for comment. * testsuite/ld-elf/dt-relr-2.s: Likewise. * testsuite/ld-elf/dt-relr-3.s: Likewise. 2022-01-13 Alan Modra Move DT_RELR tag setting to elflink.c This makes the code setting DT_RELR tags generally available. Many targets will be able to use the defaults. Those that can't should set up sh_entsize for .relr.dyn output section before reaching the dynamic tag code in bfd_elf_final_link. * elflink.c (bfd_elf_final_link): Set up DT_RELR tags and sh_entsize. * elfxx-x86.c (_bfd_x86_elf_finish_dynamic_sections): Don't do any of that here. 2022-01-13 Alan Modra Re: Set SEC_ELF_REVERSE_COPY earlier Let's not rely on .init/.fini having relocs for the size sanity check. This is mainly to squash reports of "my fuzzed object made ld hang". 2022-01-13 Tiezhu Yang gdb: testsuite: make string[] type as char in gdb.base/charset.c This reverts the commit ff656e2e1cb1 ("gdb: testsuite: fix failed testcases in gdb.base/charset.exp"). The original test code has no problem. On an architecture where char is signed, then both 'A' and ebcdic_us_string[7] will yield -63, which makes the equality true. On an architecture where char is unsigned, then both 'A' and ebcdic_us_string[7] will yield 193, which also makes the equality true. The test cases only failed on LoongArch. The default type of char is signed char on LoongArch, like x86-64. But when use gdb print command on LoongArch, the default type of char is unsigned char, this is wrong, I will look into it later, sorry for that. On LoongArch: $ cat test_char.c #include int main() { char c1 = 193; unsigned char c2 = 193; printf("%d\n", c1); printf("%d\n", c1 == c2); return 0; } $ gcc test_char.c -o test_char $ ./test_char -63 0 (gdb) set target-charset EBCDIC-US (gdb) print 'A' $1 = 193 'A' (gdb) print /c 'A' $2 = 193 'A' (gdb) print /u 'A' $3 = 193 (gdb) print /d 'A' $4 = -63 (gdb) print /x 'A' $5 = 0xc1 2022-01-13 GDB Administrator Automatic date update in version.in 2022-01-12 Carl Love gdb Power 9 add test for HW watchpoint support. The Power 9 processor revision 2.2 has HW watchpoint support disabled due to a HW bug. The support is fixed in Power 9 processor revision 2.3. This patch add a test to lib/gdb.exp for Power to determine if the processor supports HW watchpoints or not. If the Power processor doesn't support HW watchpoints the proceedure skip_hw_watchpoint_tests will return 1 to disable the various HW watchpoint tests. The patch has been tested on Power 9, processor revesions 2.2 and 2.3. The patch has also been tested on Power 10. No regression test failures were found. 2022-01-12 Andrew Burgess gdb/python: add gdb.host_charset function We already have gdb.target_charset and gdb.target_wide_charset. This commit adds gdb.host_charset along the same lines. 2022-01-12 Tankut Baris Aktemur gdb/testsuite: fix gdb.python/py-events.exp for finding process id When executed with --target_board=native-extended-gdbserver, the gdb.python/py-events.exp test errors out with ERROR: tcl error sourcing /path/to/gdb/testsuite/gdb.python/py-events.exp. ERROR: can't read "process_id": no such variable while executing "lappend expected "ptid: \\($process_id, $process_id, 0\\)" "address: $addr"" (file "/path/to/gdb/testsuite/gdb.python/py-events.exp" line 103) invoked from within "source /path/to/gdb/testsuite/gdb.python/py-events.exp" ("uplevel" body line 1) invoked from within "uplevel #0 source /path/to/gdb/testsuite/gdb.python/py-events.exp" invoked from within "catch "uplevel #0 source $test_file_name"" There are multiple problems around this: 1. The process_id variable is not initialized to a default value. 2. The test attempts to find the PID of the current thread, but the regexp that it uses is not tailored for the output printed by the remote target. 3. The test uses "info threads" to find the current thread PID. Using the "thread" command instead is simpler. Fix these problems. 2022-01-12 Tom Tromey Don't mention "serial" in target remote description PR remote/9177 points out that "info files" mentions "serial" a couple of times: Remote serial target in gdb-specific protocol: Debugging a target over a serial line. However, often the remote target isn't really a serial connection. It seems to me that this text could be a bit clearer; and furthermore since "info files" prints the target's long description, remote_target::files_info doesn't really add much and can simply be removed. Regression tested on x86-64 Fedora 34. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=9177 2022-01-12 H.J. Lu ld: Add glibc dependency for DT_RELR When DT_RELR is enabled, to avoid random run-time crash with older glibc binaries without DT_RELR support, add a GLIBC_ABI_DT_RELR symbol version, which is provided by glibc with DT_RELR support, dependency on the shared C library if it provides a GLIBC_2.XX symbol version. bfd/ * elflink.c (elf_link_add_dt_relr_dependency): New function. (bfd_elf_size_dynamic_sections): Call elf_link_add_dt_relr_dependency if DT_RELR is enabled. ld/ * ld.texi: Mention GLIBC_ABI_DT_RELR in -z pack-relative-relocs entry. * testsuite/ld-elf/dt-relr-glibc-1.c: New file. * testsuite/ld-elf/dt-relr-glibc-1a.rd: Likewise. * testsuite/ld-elf/dt-relr-glibc-1b.rd: Likewise. * testsuite/ld-elf/dt-relr.exp: Likewise. 2022-01-12 H.J. Lu ld: Add simple DT_RELR tests * testsuite/ld-elf/dt-relr-1.s: New file. * testsuite/ld-elf/dt-relr-1a.d: Likewise. * testsuite/ld-elf/dt-relr-1b.d: Likewise. * testsuite/ld-elf/dt-relr-1c.d: Likewise. * testsuite/ld-elf/dt-relr-2.s: Likewise. * testsuite/ld-elf/dt-relr-2a.d: Likewise. * testsuite/ld-elf/dt-relr-2b.d: Likewise. * testsuite/ld-elf/dt-relr-2c.d: Likewise. * testsuite/ld-elf/dt-relr-2d.d: Likewise. * testsuite/ld-elf/dt-relr-2e.d: Likewise. * testsuite/ld-elf/dt-relr-2f.d: Likewise. * testsuite/ld-elf/dt-relr-2g.d: Likewise. * testsuite/ld-elf/dt-relr-2h.d: Likewise. * testsuite/ld-elf/dt-relr-3.s: Likewise. * testsuite/ld-elf/dt-relr-3a.d: Likewise. * testsuite/ld-elf/dt-relr-3b.d: Likewise. * testsuite/ld-i386/dt-relr-1.s: Likewise. * testsuite/ld-i386/dt-relr-1a.d: Likewise. * testsuite/ld-i386/dt-relr-1b.d: Likewise. * testsuite/ld-x86-64/dt-relr-1a-x32.d: Likewise. * testsuite/ld-x86-64/dt-relr-1a.d: Likewise. * testsuite/ld-x86-64/dt-relr-1b-x32.d: Likewise. * testsuite/ld-x86-64/dt-relr-1b.d: Likewise. * testsuite/ld-x86-64/dt-relr-1.s: Likewise. * testsuite/ld-i386/i386.exp: Run dt-relr-1a and dt-relr-1b. * testsuite/ld-x86-64/x86-64.exp: Run dt-relr-1a, dt-relr-1a-x32 dt-relr-1b and dt-relr-1b-x32. 2022-01-12 H.J. Lu x86: Add DT_RELR support DT_RELR is implemented with linker relaxation: 1. During linker relaxation, we scan input relocations with the same logic in relocate_section to determine if a relative relocation should be generated and save the relative relocation candidate information for sizing the DT_RELR section later after all symbols addresses can be determined. For these relative relocations which can't be placed in the DT_RELR section, they will be placed in the rela.dyn/rel.dyn section. 2. When DT_RELR is enabled, _bfd_elf_map_sections_to_segments calls a backend function to size the DT_RELR section which will compute the DT_RELR section size and tell ldelf_map_segments to layout sections again when the DT_RELR section size has been increased. 3. After regular symbol processing is finished, bfd_elf_final_link calls a backend function to finish the DT_RELR section. * elf32-i386.c (elf_i386_relocate_section): Don't generate relative relocation when DT_RELR is enabled. (elf_i386_finish_dynamic_symbol): Likewise. * elf64-x86-64.c (elf_x86_64_relocate_section): Don't generate relative relocation when DT_RELR is enabled. (elf_x86_64_finish_dynamic_symbol): Likewise. * elfxx-x86.c (_bfd_x86_elf_link_hash_table_create): Initialize relative_r_type, relative_r_name, elf_append_reloc, elf_write_addend and elf_write_addend_in_got. (elf_x86_relative_reloc_record_add): New function. (_bfd_x86_elf_link_relax_section): Likewise. (elf64_dt_relr_bitmap_add): Likewise. (elf32_dt_relr_bitmap_add): Likewise. (_bfd_elf32_write_addend): Likewise. (_bfd_elf64_write_addend): Likewise. (elf_x86_size_or_finish_relative_reloc): Likewise. (elf_x86_compute_dl_relr_bitmap): Likewise. (elf_x86_write_dl_relr_bitmap): Likewise. (elf_x86_relative_reloc_compare ): Likewise. (_bfd_elf_x86_size_relative_relocs): Likewise. (_bfd_elf_x86_finish_relative_relocs): Likewise. (_bfd_x86_elf_size_dynamic_sections): Skip the .relr.dyn section. (_bfd_x86_elf_finish_dynamic_sections): Convert 3 spare dynamic tags to DT_RELR, DT_RELRSZ and for compact relative relocation. * elfxx-x86.h (X86_64_GOT_TYPE_P): New. (I386_GOT_TYPE_P): Likewise. (X86_GOT_TYPE_P): Likewise. (X86_64_RELATIVE_RELOC_TYPE_P): Likewise. (I386_RELATIVE_RELOC_TYPE_P): Likewise. (X86_RELATIVE_RELOC_TYPE_P): Likewise. (X86_LOCAL_GOT_RELATIVE_RELOC_P): Likewise. (I386_PCREL_TYPE_P): Likewise. (X86_64_PCREL_TYPE_P): Likewise. (X86_64_NEED_DYNAMIC_RELOC_TYPE_P): Rewrite. (I386_NEED_DYNAMIC_RELOC_TYPE_P): Likewise. (GENERATE_DYNAMIC_RELOCATION_P): Also check rel_from_abs. (elf_x86_link_hash_entry): Add got_relative_reloc_done. (elf_x86_relative_reloc_record): New. (elf_x86_relative_reloc_data): Likewise. (elf_dt_relr_bitmap): Likewise. (elf_x86_link_hash_table): Add dt_relr_bitmap, relative_reloc, unaligned_relative_reloc, relative_r_type, relative_r_name, elf_append_reloc, elf_write_addend, elf_write_addend_in_got and relative_reloc_done. (elf_x86_relative_reloc_done): New. (relative_reloc_packed): Likewise. (_bfd_x86_elf_link_relax_section): Likewise. (_bfd_elf_x86_size_relative_relocs): Likewise. (_bfd_elf_x86_finish_relative_relocs): Likewise. (_bfd_elf32_write_addend): Likewise. (_bfd_elf64_write_addend): Likewise. (bfd_elf32_bfd_relax_section): Likewise. (bfd_elf64_bfd_relax_section): Likewise. (elf_backend_size_relative_relocs): Likewise. (elf_backend_finish_relative_relocs): Likewise. (elf_x86_allocate_local_got_info): Also allocate relative_reloc_done. 2022-01-12 H.J. Lu elf: Support DT_RELR in linker tests Allow eabling and disabling DT_RELR in linker tests. Disable DT_RELR in linker tests which don't expect DT_RELR in linker outputs. binutils/ * testsuite/lib/binutils-common.exp (run_dump_test): Make DT_RELR_LDFLAGS and NO_DT_RELR_LDFLAGS global. ld/ * testsuite/config/default.exp (DT_RELR_LDFLAGS): New. (DT_RELR_CC_LDFLAGS): Likewise. (NO_DT_RELR_LDFLAGS): Likewise. (NO_DT_RELR_CC_LDFLAGS): Likewise. * testsuite/ld-elf/shared.exp: Pass $NO_DT_RELR_LDFLAGS to linker for some tests. * testsuite/ld-i386/export-class.exp: Likewise. * testsuite/ld-i386/i386.exp: Likewise. * testsuite/ld-i386/ibt-plt-2a.d: Pass $NO_DT_RELR_LDFLAGS to linker. * testsuite/ld-i386/ibt-plt-3a.d: Likewise. * testsuite/ld-i386/ibt-plt-3c.d: Likewise. * testsuite/ld-i386/pr26869.d: Likewise. * testsuite/ld-i386/report-reloc-1.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64-now.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64.d: Likewise. * testsuite/ld-x86-64/bnd-branch-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-2.d: Likewise. * testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ilp32-4.d: Likewise. * testsuite/ld-x86-64/load1c.d: Likewise. * testsuite/ld-x86-64/load1d.d: Likewise. * testsuite/ld-x86-64/pr13082-2b.d: Likewise. * testsuite/ld-x86-64/pr14207.d: Likewise. * testsuite/ld-x86-64/pr18176.d: Likewise. * testsuite/ld-x86-64/pr19162.d: Likewise. * testsuite/ld-x86-64/pr19636-2d.d: Likewise. * testsuite/ld-x86-64/pr19636-2l.d: Likewise. * testsuite/ld-x86-64/pr20253-1d.d: Likewise. * testsuite/ld-x86-64/pr20253-1f.d: Likewise. * testsuite/ld-x86-64/pr20253-1j.d: Likewise. * testsuite/ld-x86-64/pr20253-1l.d: Likewise. * testsuite/ld-x86-64/report-reloc-1-x32.d: Likewise. * testsuite/ld-x86-64/report-reloc-1.d: Likewise. * testsuite/ld-x86-64/export-class.exp (x86_64_export_class_test): Pass $NO_DT_RELR_LDFLAGS to linker. * testsuite/ld-x86-64/x86-64.exp: Pass $NO_DT_RELR_LDFLAGS to linker for some tests. 2022-01-12 H.J. Lu elf: Add size_relative_relocs and finish_relative_relocs On some targets, the DT_RELR section size can be computed only after all symbols addresses can be determined. Set the preliminary DT_RELR section size before mapping sections to segments and set the final DT_RELR section size after regular symbol processing is done. * elf-bfd.h (elf_backend_data): Add size_relative_relocs and finish_relative_relocs. * elf.c (_bfd_elf_map_sections_to_segments): Call size_relative_relocs if DT_RELR is enabled. * elflink.c (bfd_elf_final_link): Call finish_relative_relocs after regular symbol processing is finished if DT_RELR is enabled. * elfxx-target.h (elf_backend_size_relative_relocs): New. (elf_backend_finish_relative_relocs): Likewise. (elfNN_bed): Add elf_backend_size_relative_relocs and elf_backend_finish_relative_relocs. 2022-01-12 H.J. Lu ld: Initial DT_RELR support Add a -z pack-relative-relocs option to enable DT_RELR and create a relr.dyn section for DT_RELR. DT_RELR is implemented with the linker relaxation infrastructure, but it doesn't require the --relax option enabled. -z pack-relative-relocs implies -z combreloc. -z nocombreloc implies -z nopack-relative-relocs. -z pack-relative-relocs is chosen over the similar option in lld, --pack-dyn-relocs=relr, to implement a glibc binary lockout mechanism with a special glibc version symbol, to avoid random crashes of DT_RELR binaries with the existing glibc binaries. bfd/ * elf-bfd.h (elf_link_hash_table): Add srelrdyn. * elflink.c (_bfd_elf_link_create_dynamic_sections): Create a .relr.dyn section for DT_RELR. include/ * bfdlink.h (bfd_link_info): Add enable_dt_relr. ld/ * News: Mention -z pack-relative-relocs and -z nopack-relative-relocs. * ld.texi: Document -z pack-relative-relocs and -z nopack-relative-relocs. * ldelf.c (ldelf_after_parse): Disable DT_RELR if not building PIE nor shared library. Add 3 spare dynamic tags for DT_RELR, DT_RELRSZ and DT_RELRENT. * ldlang.c (lang_relax_sections): Also enable relaxation if DT_RELR is enabled. * emulparams/elf32_x86_64.sh: Source dt-relr.sh. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_x86_64.sh: Likewise. * emulparams/dt-relr.sh: New file. * scripttempl/elf.sc: Support .relr.dyn. 2022-01-12 H.J. Lu elf: Pass need_layout to _bfd_elf_map_sections_to_segments On some targets, the DT_RELR section size can be computed only after all symbols addresses can be determined. Update ldelf_map_segments to pass need_layout to _bfd_elf_map_sections_to_segments which will size DT_RELR section and set need_layout to true if the DT_RELR section size is changed. bfd/ * elf-bfd.h (_bfd_elf_map_sections_to_segments): Add a bool pointer argument. * elf.c (_bfd_elf_map_sections_to_segments): Add a bool pointer argument to indicate if section layout needs update. (assign_file_positions_for_load_sections): Pass NULL to _bfd_elf_map_sections_to_segments. * elflink.c (_bfd_elf_strip_zero_sized_dynamic_sections): Pass NULL to _bfd_elf_map_sections_to_segments. ld/ * ldelfgen.c (ldelf_map_segments): Pass &need_layout to _bfd_elf_map_sections_to_segments. 2022-01-12 H.J. Lu elf: Add .relr.dyn to special_sections_r * elf.c (special_sections_r): Add .relr.dyn. 2022-01-12 Andrew Burgess gdb: add 'maint set/show gnu-source-highlight enabled' command In a later commit I want to address an issue with the Python pygments based code styling solution. As this approach is only used when the GNU Source Highlight library is not available, testing bugs in this area can be annoying, as it requires GDB to be rebuilt with use of GNU Source Highlight disabled. This commit adds a pair of new maintenance commands: maintenance set gnu-source-highlight enabled on|off maintenance show gnu-source-highlight enabled these commands can be used to disable use of the GNU Source Highlight library, allowing me, in a later commit, to easily test bugs that would otherwise be masked by GNU Source Highlight being used. I made this a maintenance command, rather than a general purpose command, as it didn't seem like this was something a general user would need to adjust. We can always convert the maintenance command to a general command later if needed. There's no test for this here, but this feature will be used in a later commit. 2022-01-12 Andrew Burgess gdb: erase items from the source_cache::m_offset_cache The source_cache class has two member variables m_source_map, which stores the file contents, and m_offset_cache, which stores offsets into the file contents. As source files are read the contents of the file, as well as the offset data, are stored in the cache using these two member variables. Whenever GDB needs either the files contents, or the offset data, source_cache::ensure is called. This function looks for the file in m_source_map, and if it's found then this implies the file is also in m_offset_cache, and we're done. If the file is not in m_source_map then GDB calls source_cache::get_plain_source_lines to open the file and read its contents. ::get_plain_source_lines also calculates the offset data, which is then inserted into m_offset_cache. Back in ::ensure, the file contents are added into m_source_map. And finally, if m_source_map contains more than MAX_ENTRIES, an entry is removed from m_source_map. The problem is entries are not removed from m_offset_cache at the same time. This means that if a program contains enough source files, GDB will hold at most MAX_ENTRIES cached source file contents, but can contain offsets data for every source file. Now, the offsets data is going to be smaller than the cached file contents, so maybe there's no harm here. But, when we reload the file contents we always recalculate the offsets data. And, when we ::get_line_charpos asking for offset data we still call ::ensure which will ends up loading and caching the file contents. So, given the current code does the work of reloading the offset data anyway, we may as well save memory by capping m_offset_cache to MAX_ENTRIES just like we do m_source_map. That's what this commit does. There should be no user visible changes after this commit, except for ever so slightly lower memory usage in some cases. 2022-01-12 Andrew Burgess gdb: new 'maint flush source-cache' command This commit adds a new 'maint flush source-cache' command, this flushes the cache of source file contents. After flushing GDB is forced to reread source files the next time any source lines are to be displayed. I've added a test for this new feature. The test is a little weird, in that it modifies a source file after compilation, and makes use of the cache flush so that the changes show up when listing the source file. I'm not sure when such a situation would ever crop up in real life, but maybe we can imagine such cases. In reality, this command is useful for testing the syntax highlighting within GDB, we can adjust the syntax highlighting settings, flush the cache, and then get the file contents re-highlighted using the new settings. 2022-01-12 Andrew Burgess gdb: rename lin-lwp to linux-nat in set/show debug Rename 'set debug lin-lwp' to 'set debug linux-nat' and 'show debug lin-lwp' to 'show debug linux-nat'. I've updated the documentation and help text to match, as well as making it clear that the debug that is coming out relates to all aspects of Linux native inferior support, not just the LWP aspect of it. The boundary between general "native" target debug, and the lwp specific part of that debug was always a little blurry, but the actual debug variable inside GDB is debug_linux_nat, and the print routine linux_nat_debug_printf, is used throughout the linux-nat.c file, not just for lwp related debug, so the new name seems to make more sense. 2022-01-12 Clément Chigot ld: add hidden and internal visibility support for XCOFF This patch adds a primary support for hidden and internal visibility in GNU linker for XCOFF format. The protected visibility isn't yet supported. PR 22085 bfd/ChangeLog: * xcofflink.c (xcoff_dynamic_definition_p): Add hidden and internal visibility support. (xcoff_link_add_symbols): Likewise. (xcoff_auto_export_p): Likewise. (bfd_xcoff_export_symbol): Likewise. (xcoff_link_input_bfd): Likewise. ld/ChangeLog: * testsuite/ld-vsb/main.c: Adapt for XCOFF. * testsuite/ld-vsb/sh1.c: Likewse. * testsuite/ld-vsb/vsb.exp: Likewise. * testsuite/ld-vsb/visibility-1-xcoff-32.d: New test. * testsuite/ld-vsb/visibility-1-xcoff-64.d: New test. * testsuite/ld-vsb/visibility-2-xcoff-32.d: New test. * testsuite/ld-vsb/visibility-2-xcoff-64.d: New test. * testsuite/ld-vsb/xcoffvsb.dat: New test. 2022-01-12 Clément Chigot ld/testsuite: prepare ld-elfvsb to support XCOFF A following patch will add visibility support in ld for XCOFF. Thus, ld-elfvsb is renamed ld-vsb and a suffix is added to files targeting only ELF format. ld/ChangeLog: * testsuite/ld-elfvsb: rename as ld-vsb. * testsuite/ld-elfvsb/hidden0.d: move to ld-vsb and rename with suffix -elf.d. * testsuite/ld-elfvsb/hidden1.d: Likewise. * testsuite/ld-elfvsb/hidden2.d: Likewise. * testsuite/ld-elfvsb/internal0.d: Likewise. * testsuite/ld-elfvsb/internal1.d: Likewise. * testsuite/ld-elfvsb/protected0.d: Likewise. * testsuite/ld-elfvsb/protected1.d: Likewise. 2022-01-12 Clément Chigot gas: add visibility support using GNU syntax on XCOFF In order to ease port of GNU assembly code and especially ld testsuite, this patch allows XCOFF to accept the usual GNU syntax for visibility. PR 22085 gas/ChangeLog: * config/tc-ppc.c (ppc_GNU_visibility): New function. * testsuite/gas/ppc/aix.exp: Add new tests. * testsuite/gas/ppc/xcoff-visibility-2-32.d: New test. * testsuite/gas/ppc/xcoff-visibility-2-64.d: New test. * testsuite/gas/ppc/xcoff-visibility-2.s: New test. 2022-01-12 Clément Chigot gas: add visibility support for XCOFF XCOFF assembly defines the visibility using an additional argument on several pseudo-ops: .globl, .weak, .extern and .comm. This implies that .globl and .weak syntax is different than the usual GNU syntax. But we want to provide compatibility with AIX assembler, especially because GCC is generating the visibility using this XCOFF syntax. PR 22085 bfd/ChangeLog: * coffcode.h (coff_write_object_contents): Change XCOFF header vstamp field to 2. * coffgen.c (coff_print_symbol): Increase the size for n_type. gas/ChangeLog: * config/tc-ppc.c (ppc_xcoff_get_visibility): New function. (ppc_globl): New function. (ppc_weak): New function. (ppc_comm): Add visibility field support. (ppc_extern): Likewise. * testsuite/gas/all/cofftag.d: Adjust to new n_type size providing by objdump. * testsuite/gas/ppc/test1xcoff32.d: Likewise. * testsuite/gas/ppc/aix.exp: Add new tests. * testsuite/gas/ppc/xcoff-visibility-1-32.d: New test. * testsuite/gas/ppc/xcoff-visibility-1-64.d: New test. * testsuite/gas/ppc/xcoff-visibility-1.s: New test. include/ChangeLog: * coff/internal.h (SYM_V_INTERNAL, SYM_V_HIDDEN, SYM_V_PROTECTED, SYM_V_EXPORTED, SYM_V_MASK): New defines. * coff/xcoff.h (struct xcoff_link_hash_entry): Add visibility field. ld/ChangeLog: * testsuite/ld-pe/pr19803.d: Adjust to new n_type size providing by objdump. 2022-01-12 Hans-Peter Nilsson objdump, readelf: Emit "CU:" format only when wide output is requested As pre-approved by Alan in https://sourceware.org/pipermail/binutils/2021-September/118019.html and I believe people have run into getting testsuite failures for test-environments with "long" directory names, at least once more since that time. Enough. I grepped the gas, binutils and ld testsuites for "CU:" to catch target-specific occurrences, but I noticed none. I chose to remove "CU:" on the objdump tests instead of changing options to get the wide format, so as to keep the name of the test consistent with actual options; but added it to the readelf options for the gas test as I believe the "CU:" format is preferable. Tested for cris-elf and native x86_64-pc-linux-gnu. binutils: * dwarf.c (display_debug_lines_decoded): Don't check the string length of the directory, instead emit the "CU: dir/name" format only if wide output is requested. * testsuite/binutils-all/dw5.W, testsuite/binutils-all/objdump.WL: Adjust accordingly. gas: * testsuite/gas/elf/dwarf-5-loc0.d: Add -W to readelf options. 2022-01-12 Alan Modra Set SEC_ELF_REVERSE_COPY earlier For the sake of DT_RELR. bfd/ * elflink.c (elf_link_input_bfd): Don't set SEC_ELF_REVERSE_COPY here. Move sanity checks to reverse copying code. ld/ * ldlang.c (lang_add_section): Set SEC_ELF_REVERSE_COPY for .ctors/.dtors in .init_array/.fini_array. 2022-01-12 Tiezhu Yang gdb: testsuite: fix wrong comment in gdb.base/charset.c In gdb/testsuite/gdb.base/charset.c, use "IBM1047" instead of "EBCDIC" to fix the wrong comment. 2022-01-12 Tiezhu Yang gdb: testsuite: fix failed testcases in gdb.base/charset.exp In gdb/testsuite/gdb.base/charset.c, the last argument is greater than 127 when call fill_run() in EBCDIC-US and IBM1047, but the type of string[] is char, this will change the value due to sign extension. For example, ebcdic_us_string[7] will be -63 instead of the original 193 in EBCDIC-US. Make the type of string[] as unsigned char to fix the following six failed testcases: $ grep FAIL gdb/testsuite/gdb.sum FAIL: gdb.base/charset.exp: check value of parsed character literal in EBCDIC-US FAIL: gdb.base/charset.exp: check value of parsed string literal in EBCDIC-US FAIL: gdb.base/charset.exp: check value of escape that doesn't exist in EBCDIC-US FAIL: gdb.base/charset.exp: check value of parsed character literal in IBM1047 FAIL: gdb.base/charset.exp: check value of parsed string literal in IBM1047 FAIL: gdb.base/charset.exp: check value of escape that doesn't exist in IBM1047 2022-01-12 GDB Administrator Automatic date update in version.in 2022-01-11 Fangrui Song ar: Add --thin for creating thin archives In many ar implementations (FreeBSD, elfutils, etc), -T has the X/Open System Interface specified semantics. Therefore -T for thin archives is not recommended for portability. -T is deprecated without diagnostics. PR binutils/28759 * ar.c (long_options): Add --thin. (usage) Add --thin. Deprecate -T without diagnostics. * doc/binutils.texi: Add doc. * NEWS: Mention --thin. * binutils/testsuite/binutils-all/ar.exp: Add tests. 2022-01-11 Martin Storsj Fix multiple problems with DLL generation. ld * pe-dll.c (make_head): Prefix the symbol name with the dll name. (make_tail, make_one, make_singleton_name_thunk): Likewise. (make_import_fixup_entry, make_runtime_pseudo_reloc): Likewise. (pe_create_runtime_relocator_reference): Likewise. (pe_dll_generate_implib): Set dll_symname_len. (pe_process_import_defs): Likewise. binutils * dlltool.c (main): If a prefix has not been provided, attempt to use a deterministic one based upon the dll name. 2022-01-11 Jan Beulich gas/doc: mention quoted symbol names 2022-01-11 Andrew Burgess gdbsupport: regenerate Makefile.in I had cause to regenerate gdbsupport/Makefile.in, and noticed some unexpected changes in the copyright header dates. I suspect that this was caused by the end of year date range update process. The Makefile.in contains two date ranges. The first range appears to be the date range for the version of automake being used, that is the range runs up to 2017 only, when automake 1.15.1 was released. The second date range in Makefile.in represents the date range for the generated file, and so, now runs up to 2022. Anyway, this is the result of running autoreconf (using automake 1.15.1) in the gdbsupport directory. 2022-01-11 GDB Administrator Automatic date update in version.in 2022-01-10 Clément Chigot XCOFF: add support for TLS relocations on hidden symbols This patch adds support for TLS relocation targeting C_HIDEXT symbols. In gas, TLS relocations, except R_TLSM and R_TLMSL, must keep the value of their target symbol. In ld, it simply ensures that internal TLS symbols are added to the linker hash table for xcoff_reloc_type_tls. It also improves the tests made by both. bfd/ChangeLog: * coff-rs6000.c (xcoff_howto_table): Fix name of R_TLSML. (xcoff_reloc_type_tls): Replace the error when h is NULL by an assert. (xcoff_complain_overflow_unsigned_func): Adjust comments. * coff64-rs6000.c (xcoff64_howto_table): Fix name of R_TLSML. * xcofflink.c (xcoff_link_add_symbols_to_hash_table): New function. (xcoff_link_add_symbols): Add C_HIDEXT TLS symbols to the linker hash table. gas/ChangeLog: * config/tc-ppc.c (md_apply_fix): Enable support for TLS relocation over internal symbols. * testsuite/gas/ppc/aix.exp: Replace xcoff-tlms by xcoff-tls. * testsuite/gas/ppc/xcoff-tlsm-32.d: Removed. * testsuite/gas/ppc/xcoff-tlsm-64.d: Removed. * testsuite/gas/ppc/xcoff-tlsm.s: Removed. * testsuite/gas/ppc/xcoff-tls-32.d: New test. * testsuite/gas/ppc/xcoff-tls-64.d: New test. * testsuite/gas/ppc/xcoff-tls.s: New test. ld/ChangeLog: * testsuite/ld-powerpc/aix52.exp: Improve aix-tls-reloc test. * testsuite/ld-powerpc/aix-tls-reloc.s: Likewise. * testsuite/ld-powerpc/aix-tls-reloc-32.d: Removed. * testsuite/ld-powerpc/aix-tls-reloc-64.d: Removed. * testsuite/ld-powerpc/aix-tls-reloc-32.dd: New test. * testsuite/ld-powerpc/aix-tls-reloc-32.dt: New test. * testsuite/ld-powerpc/aix-tls-reloc-64.dd: New test. * testsuite/ld-powerpc/aix-tls-reloc-64.dt: New test. 2022-01-10 Tiezhu Yang gdb: add Tiezhu Yang to MAINTAINERS 2022-01-10 Tom Tromey Reduce use of unfiltered output in Darwin code The Darwin code uses unfiltered output liberally. This patch changes this code to send some output to gdb_stdlog (in some cases via the use of debug_prefixed_printf_cond_nofunc), or to gdb_stderr, or to simply switch to filtered output. Note that I didn't switch inferior_debug to use debug_prefixed_printf_cond_nofunc, because that would affect the output by removing the information about the inferior. I wasn't sure if this was important or not, so I left it in. v2 of this patch uses warning rather than prints to gdb_stderr, and removes some trailing whitespace. I can't compile this patch, so it's "best effort". 2022-01-10 GDB Administrator Automatic date update in version.in 2022-01-09 GDB Administrator Automatic date update in version.in 2022-01-08 Andrew Burgess gdb/hurd: handle inferiors exiting While testing on GNU/Hurd (i386) I noticed that GDB crashes when an inferior exits, with this error: inferior.c:293: internal-error: inferior* find_inferior_pid(process_stratum_target*, int): Assertion `pid != 0' failed. The problem appears to be in gnu_nat_target::wait. We always set inferior_ptid to null_ptid before calling target_wait, this has been the case since the multi-target changes were made to GDB in commit: commit 5b6d1e4fa4fc6827c7b3f0e99ff120dfa14d65d2 Date: Fri Jan 10 20:06:08 2020 +0000 Multi-target support With follow up changes in commit: commit 24ed6739b699f329c2c45aedee5f8c7d2f54e493 Date: Thu Jan 30 14:35:40 2020 +0000 gdb/remote: Restore support for 'S' stop reply packet Unfortunately, the GNU/Hurd target is still relying on the value of inferior_ptid in the case where an inferior exits - we return the value of inferior_ptid as the pid of the process that exited. This was fine in the single target world, where inferior_ptid identified the one running inferior, but this is no longer good enough. Instead, we should return a ptid containing the pid of the process that exited, as obtained from the wait event, and this is what this commit does. I've not run the full testsuite on GNU/Hurd as there appear to be lots of other issues with this target that makes running the full testsuite very painful, but I think this looks like a small easy improvement. 2022-01-08 Tom Tromey Add explicit check for nullptr to target_announce_attach Lancelot pointed out that target_announce_attach was missing an explicit check against nullptr. This patch adds it. 2022-01-08 Hannes Domani Add _sigsys info to siginfo struct This patch adds information about _sigsys structure from newer kernels, so that $_siginfo decoding can show information about _sigsys, making it easier for developers to debug seccomp failures. Requested in PR gdb/24283. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=24283 2022-01-08 Tiezhu Yang gdb: testsuite: show print array-indexes after set in arrayidx.exp Add "show print array-indexes" testcases after set print array-indexes to off or on. Without this patch: PASS: gdb.base/arrayidx.exp: set print array-indexes to off PASS: gdb.base/arrayidx.exp: print array with array-indexes off PASS: gdb.base/arrayidx.exp: set print array-indexes to on PASS: gdb.base/arrayidx.exp: print array with array-indexes on With this patch: PASS: gdb.base/arrayidx.exp: set print array-indexes to off PASS: gdb.base/arrayidx.exp: show print array-indexes is off PASS: gdb.base/arrayidx.exp: print array with array-indexes off PASS: gdb.base/arrayidx.exp: set print array-indexes to on PASS: gdb.base/arrayidx.exp: show print array-indexes is on PASS: gdb.base/arrayidx.exp: print array with array-indexes on 2022-01-08 H.J. Lu ld: Extract _bfd_elf_link_iterate_on_relocs DT_RELR encodes consecutive R_*_RELATIVE relocations in GOT (the global offset table) and data sections in a compact format: https://groups.google.com/g/generic-abi/c/bX460iggiKg On some targets, R_*_RELATIVE relocations are counted and the GOT offsets are allocated when setting the dynamic section sizes after seeing all relocations. R_*_RELATIVE relocations are generated while relocating sections after section layout has been finalized. To prepare for DT_RELR implementation on these targets, extract _bfd_elf_link_iterate_on_relocs from _bfd_elf_link_check_relocs so that a backend can scan relocations in elf_backend_always_size_sections For x86 targets, the old check_relocs is renamed to scan_relocs and a new check_relocs is added to chek input sections and create dynamic relocation sections so that they will be mapped to output sections. scan_relocs is now called from elf_backend_always_size_sections. Since relocations are scanned after __start, __stop, .startof. and .sizeof. symbols have been finalized on x86, __[start|stop]_SECNAME for --gc-sections -z start-stop-gc are now zero when all SECNAME sections been garbage collected. This is no need for elf_x86_start_stop_gc_p. bfd/ * elf-bfd.h (_bfd_elf_link_iterate_on_relocs): New. * elf32-i386.c (elf_i386_convert_load_reloc): Don't call elf_x86_start_stop_gc_p. (elf_i386_check_relocs): Renamed to ... (elf_i386_scan_relocs): This. Don't call _bfd_elf_make_dynamic_reloc_section. (elf_i386_always_size_sections): New. (elf_backend_check_relocs): Removed. (elf_backend_always_size_sections): New. * elf64-x86-64.c (elf_x86_64_convert_load_reloc): Don't call elf_x86_start_stop_gc_p. (elf_x86_64_check_relocs): Renamed to ... (elf_x86_64_scan_relocs): This. Don't call _bfd_elf_make_dynamic_reloc_section. (elf_x86_64_always_size_sections): New. (elf_backend_check_relocs): Removed. (elf_backend_always_size_sections): New. * elflink.c (elf_link_check_or_scan_relocs): New. Extracted from _bfd_elf_link_check_relocs. (_bfd_elf_link_check_relocs): Call elf_link_check_or_scan_relocs. * elfxx-x86.c (_bfd_x86_elf_check_relocs): New. * elfxx-x86.h (X86_64_NEED_DYNAMIC_RELOC_TYPE_P): New. (I386_NEED_DYNAMIC_RELOC_TYPE_P): Likewise. (X86_NEED_DYNAMIC_RELOC_TYPE_P): Likewise. (_bfd_x86_elf_check_relocs): Likewise. (elf_backend_check_relocs): Likewise. (elf_backend_always_size_sections): Removed. (elf_x86_start_stop_gc_p): Likewise. ld/ * testsuite/ld-i386/pr27491-1a.d: Updated. * testsuite/ld-x86-64/pr27491-1a.d: Likewise. 2022-01-08 GDB Administrator Automatic date update in version.in 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.mi/mi-catch-load.exp When I run the testsuite, I have: Running .../gdb/testsuite/gdb.mi/mi-catch-load.exp ... DUPLICATE: gdb.mi/mi-catch-load.exp: breakpoint at main DUPLICATE: gdb.mi/mi-catch-load.exp: mi runto main Fix by grouping the various phases in with_test_prefix blocks. Since the tests now have a prefix, remove the manually written prefixes in testnames. Also change some messages with the pattern "(timeout) $testname" into "$estname (timeout)" since tools will handle this as $testname[1] (which is what we want in this particular scenario). Tested on x86_64-linux. [1] https://sourceware.org/gdb/wiki/GDBTestcaseCookbook#Do_not_use_.22tail_parentheses.22_on_test_messages 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.threads/staticthreads.ex When running the testsuite, I have: Running .../gdb/testsuite/gdb.threads/staticthreads.exp ... DUPLICATE: gdb.threads/staticthreads.exp: couldn't compile staticthreads.c: unrecognized error Fix by using foreach_with_prefix instead of foreach when preparing the test case. Testeed on x86_64-linux both in a setup where the test fails to prepare and in a setup where the test fails to setup. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.mi/mi-language.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.mi/mi-language.exp ... DUPLICATE: gdb.mi/mi-language.exp: set lang ada This is due to an erroneous explicit test name. This explicit test name also happens to be useless (at least it would have been if it was correct) since it only repeats the command, so just remove the explicit test name and let the command be used as default test name. Also remove explicit test name at another location in the file since it also just repeat the command. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.mi/mi-nonstop-exit.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.mi/mi-nonstop-exit.exp ... DUPLICATE: gdb.mi/mi-nonstop-exit.exp: breakpoint at main DUPLICATE: gdb.mi/mi-nonstop-exit.exp: mi runto main This test runs the same sequence of operations twice. Refactor the code by running both of those sequences within a foreach_with_prefix block to ensure that the commands have unique test names. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.mi/mi-nonstop.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.mi/mi-nonstop.exp ... DUPLICATE: gdb.mi/mi-nonstop.exp: check varobj, w1, 1 DUPLICATE: gdb.mi/mi-nonstop.exp: stacktrace of stopped thread Fix by adjusting the problematic test names. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.mi/mi-nsthrexec.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.mi/mi-nsthrexec.exp ... DUPLICATE: gdb.mi/mi-nsthrexec.exp: breakpoint at main Fix by adjusting the duplicated test name. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/watchpoints.exp When running the testsuite, I have: Running ../gdb/testsuite/gdb.base/watchpoints.exp ... DUPLICATE: gdb.base/watchpoints.exp: watchpoint hit, first time Fix by adjusting the test names where appropriate. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/nested-subp2.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.base/nested-subp2.exp ... DUPLICATE: gdb.base/nested-subp2.exp: continue to the STOP marker DUPLICATE: gdb.base/nested-subp2.exp: print c DUPLICATE: gdb.base/nested-subp2.exp: print count Fix by using with_test_prefix to differentiate the test that are performed at different points during the execution of the debuggee. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/call-signal-resume.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.base/call-signal-resume.exp ... DUPLICATE: gdb.base/call-signal-resume.exp: dummy stack frame number DUPLICATE: gdb.base/call-signal-resume.exp: set confirm off DUPLICATE: gdb.base/call-signal-resume.exp: return This is due to the fact that a pattern was probably copy/pasted to re-use the logic while not adjusting the test names to avoid the duplication. Fix by removing the redundant tests ('set confirm off' only needs to be used once) and adjusting the test names where appropriate. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/pointers.exp When I run the testsuite, I have : Running .../gdb/testsuite/gdb.base/pointers.exp ... DUPLICATE: gdb.base/pointers.exp: pointer assignment Fix by placing the sections with duplication in with_test_prefix blocks. This removes the duplication and gives a better organization the file. Tested on x86_64-linux. Co-Authored-By: Pedro Alves 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/unload.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.base/unload.exp ... DUPLICATE: gdb.base/unload.exp: continuing to unloaded libfile Fix by adjusting the test name. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/define-prefix.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.base/define-prefix.exp ... DUPLICATE: gdb.base/define-prefix.exp: define user command: ghi-prefix-cmd Fix by adjusting test names. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/funcargs.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.base/funcargs.exp ... DUPLICATE: gdb.base/funcargs.exp: run to call2a Fix by using proc_with_prefix instead on plain proc to create logical function blocks. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/shlib-call.exp When I run the testsuite, I have: Running .../gdb/testsuite/gdb.base/shlib-call.exp ... DUPLICATE: gdb.base/shlib-call.exp: print g DUPLICATE: gdb.base/shlib-call.exp: set print sevenbit-strings DUPLICATE: gdb.base/shlib-call.exp: set print address off DUPLICATE: gdb.base/shlib-call.exp: set width 0 DUPLICATE: gdb.base/shlib-call.exp: continue until exit Fix by adjusting the test names when required, and by removing un-necessary commands. While at it, do some cleanup: - Replace an explicit GDB restart sequence with a call to clean_restart. - Remove trailing whitespaces. - Use $gdb_test_name in gdb_test_multiple. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/set-cfd.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.base/set-cwd.exp ... DUPLICATE: gdb.base/set-cwd.exp: test_cwd_reset: continue to breakpoint: break-here Fix by moving the tests after the 'runto_main' within the same with_test_prefix scope. While at it, I fix some indentation issues. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/exprs.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.base/exprs.exp ... DUPLICATE: gdb.base/exprs.exp: \$[0-9]* = red (setup) Fix by using with_test_prefix where appropriate. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/readline.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.base/readline.exp ... DUPLICATE: gdb.base/readline.exp: Simple operate-and-get-next - final prompt Fix by adjusting the prefix given to the second 'simple' call to operate_and_get_next. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/pretty-array.exp When I run the testsuite, I have: Running .../gdb/testsuite/gdb.base/pretty-array.exp ... DUPLICATE: gdb.base/pretty-array.exp: print nums DUPLICATE: gdb.base/pretty-array.exp: print nums Fix by giving a name to the test cases. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/ui-redirect.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.base/ui-redirect.exp ... DUPLICATE: gdb.base/ui-redirect.exp: redirect while already logging: set logging redirect off Fix by moving the first 'set logging redirect off' to the end of the previous [with_test_prefix] test block. The statement's purpose is to clean the on flag set in this previous block, so moving it there makes sense and does not change the sequence of commands in the test file. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb: completion-support.exp: improve leading whitespace support There is a expect support library in the source tree designed to help developers test the auto-completion capabilities of GDB. One of the functions is test_gdb_complete_unique_re. It is used (usually indirectly via test_gdb_complete_unique) to test that a given input line is completed as a given output line. The test checks for two ways to do the completion: using tab-completion, or using the 'complete' command. To do this, calls to two dedicated functions are performed. If we omit few details, we can consider that a call to test_gdb_complete_unique $input $expected is equivalent to the two following calls: test_gdb_complete_tab_unique $input $expected test_gdb_complete_cmd_unique $input $expected When using the tab-completion, everything works as expected, but some care must be taken when using the 'complete' command if the given input has leading whitespaces. In such situation, the output of the 'complete' command will drop the leading whitespaces. The current approach is that in such situation, the input and expected outputs are right trimmed (i.e. all leading whitespaces are removed) when performing the command completion check. This means that the following call: test_gdb_complete_unique " $input" " $expected" is almost equivalent to (again, omitting few details and arguments): test_gdb_complete_tab_unique " $input" " $expected" test_gdb_complete_cmd_unique "$input" "$expected" This approach comes with a problem that we encounter when running the tests in complete-empty.exp. When doing so, we have: Running .../gdb/testsuite/gdb.base/complete-empty.exp ... DUPLICATE: gdb.base/complete-empty.exp: empty-input-line: cmd complete "" This is because the test file does something like: test_gdb_complete_unique "" "!" " " 1 test_gdb_complete_unique " " " !" " " 1¬ which, if we do the substitution introduced above is equivalent to: test_gdb_complete_tab_unique "" "!" test_gdb_complete_cmd_unique "" "!" test_gdb_complete_tab_unique " " " !" test_gdb_complete_cmd_unique "" "!" We see that the lines 2 and 4 are now the same, and for this reason the testing framework complains about DUPLICATE test names. To fix that, this commit proposes that instead of left trimming both input and expected outputs, only the expected output is trimmed. Care must be taken in the case the completion gives more possibilities than allowed by the max-completions setting. In this case, the input will be repeated in the output in its left trimmed version. This commit also ensures that this is taken care of. With this commit, the gdb.base/complete-empty.exp still passes all its tests but does not report the DUPLICATE anymore. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/subst.exp When I run the testsuite, I have: Running .../gdb/testsuite/gdb.base/subst.ex ... DUPLICATE: gdb.base/subst.exp: unset substitute-path from, no rule entered yet Fix by adjusting the problematic test name. Tested on x86_64-linux. 2022-01-07 Pedro Alves gdb/testsuite: Remove duplicates from gdb.base/dfp-exprs.exp When I run the testsuite, I have: Running ../gdb/testsuite/gdb.base/dfp-exprs.exp ... DUPLICATE: gdb.base/dfp-exprs.exp: p 1.2dl < 1.3df Replace hand-written tests checking various comparison operators between various decimal floating point types with a loop to programmatically generate all the combinations. This removes the need to eyeball for all suffixes, which lead to the original duplication. Also add a lot more combinations, testing all comparison operators comprehensively. The result is 262 unique tests vs 104 before this patch. Tested on x86_86-linux. Change-Id: Id215a3d610aa8e032bf06ee160b5e3aed4a92d1e 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/ptype.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.base/ptype.exp ... DUPLICATE: gdb.base/ptype.exp: ptype the_highest DUPLICATE: gdb.base/ptype.exp: list intfoo DUPLICATE: gdb.base/ptype.exp: list charfoo Fix by adjusting the offending test names. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/dfp-test.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.base/dfp-test.exp ... DUPLICATE: gdb.base/dfp-test.exp: 1.23E is an invalid number DUPLICATE: gdb.base/dfp-test.exp: 1.23E45A is an invalid number DUPLICATE: gdb.base/dfp-test.exp: 1.23E is an invalid number DUPLICATE: gdb.base/dfp-test.exp: 1.23E45A is an invalid number Fix by using proc_with_prefix where appropriate. Tested on x86_64-linux. Co-Authored-By: Andrew Burgess 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/del.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.base/del.exp ... DUPLICATE: gdb.base/del.exp: info break after removing break on main Refactor slightly this test to run the various configurations under foreach_with_prefix so each variant is automatically prefixed, ensuring that the forgotten custom test name cannot happen. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/solib-display.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.base/solib-display.exp ... DUPLICATE: gdb.base/solib-display.exp: NO: break 25 DUPLICATE: gdb.base/solib-display.exp: NO: continue DUPLICATE: gdb.base/solib-display.exp: IN: break 25 DUPLICATE: gdb.base/solib-display.exp: IN: continue DUPLICATE: gdb.base/solib-display.exp: SEP: break 25 DUPLICATE: gdb.base/solib-display.exp: SEP: continue The 'break 25' appears because the test inserts two breakpoints at the same location. Fix this by only inserting the breakpoint once. Fix the 'continue' DUPLICATE by giving a phony name to the second continue: 'continue two'. While at it, this commit also removes a trailing space. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/decl-before-def.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.base/decl-before-def.exp ... DUPLICATE: gdb.base/decl-before-def.exp: p a Fix by giving explicit names to the two tests that use the same command. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/pending.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.base/pending.exp ... DUPLICATE: gdb.base/pending.exp: disable other breakpoints Fix by adjusting the test names. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/checkpoint.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.base/checkpoint.exp ... DUPLICATE: gdb.base/checkpoint.exp: verify lines 5 two DUPLICATE: gdb.base/checkpoint.exp: restart 0 one This patch fixes the various erroneous incorrect test names. While at it, this patch also remove some trailing white spaces across the file. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/pie-fork.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.base/pie-fork.exp ... DUPLICATE: gdb.base/pie-fork.exp: test_no_detach_on_fork: continue Fix by giving explicit names to the 'continue' commands that cause the duplicate message. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/realname-expand.exp When running the testsuite, I have: Running .../gdb/testsuite/gdb.base/realname-expand.exp ... DUPLICATE: gdb.base/realname-expand.exp: set basenames-may-differ on This is due to the fact that the test restarts GDB twice and each time sets the basenames-may-differ setting. This patch proposes to fix this by not restarting GDB so the setting is maintained. It just clears the breakpoints between the two tests and updates the breakpoints number as required. This patch also perform some minor refactorings to improve visibility. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/interp.exp When running the testsuite I have: Running .../gdb/testsuite/gdb.base/interp.exp ... DUPLICATE: gdb.base/interp.exp: interpreter-exec mi "-var-update *" This is due to the fact that multiple successive instances of gdb_test_multiple use 'pass $cmd', but one of them forgets to reset $cmd to a new test name. Fix by using 'pass $gdb_test_name', given that the gdb_test_name is set by gdb_test_multiple. While fixing this, this patch refactors all occurrences of the following pattern: set cmd foo gdb_test_multiple $cmd $cmd { -re ... { pass $cmd } } into gdb_test_multiple foo "" { -re ... { pass $gdb_test_name } } This makes this test file coherent in its use of $gdb_test_name. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/miscexprs.exp When running the testsuite I see: Running .../gdb/testsuite/gdb.base/miscexprs.exp ... DUPLICATE: gdb.base/miscexprs.exp: print value of !ibig.i[100] DUPLICATE: gdb.base/miscexprs.exp: print value of !ibig.i[100] This is due to an explicit test name repeated across multiple tests. The actual test explicit names do not add much over the command from wich default test names are derived. Fix by removing the explicit test names across the file where they do not add value. While at doing some cleaning, also use $gdb_test_name in the various uses of gdb_test_multiple. Tested on x86_64-linux. 2022-01-07 Lancelot SIX gdb/testsuite: Remove duplicates from gdb.base/stack-checking.exp When running the testsuite I have: Running .../gdb/testsuite/gdb.base/stack-checking.exp ... DUPLICATE: gdb.base/stack-checking.exp: bt DUPLICATE: gdb.base/stack-checking.exp: bt Fix by using with_test_prefix. Tested on x86_64-linux. 2022-01-07 Philipp Tomsich RISC-V: update docs to reflect privileged spec v1.9 has been dropped After commit d8af286fffa ("RISC-V: Drop the privileged spec v1.9 support.") has removed support for privileged spec v1.9, this removes it from the documentation. References: d8af286fffa ("RISC-V: Drop the privileged spec v1.9 support.") gas/ChangeLog: * configure: Regenerate. * configure.ac: Remove reference to priv spec 1.9. * po/fr.po: Same. * po/ru.po: Same. * po/uk.po: Same. 2022-01-07 Philipp Tomsich RISC-V: update docs for -mpriv-spec/--with-priv-spec for 1.12 While support for the privileged spec was added in a63375ac337 ("RISC-V: Hypervisor ext: support Privileged Spec 1.12"), the documentation has not been updated. Add 1.12 to the relevant documentation. References: a63375ac337 ("RISC-V: Hypervisor ext: support Privileged Spec 1.12") gas/ChangeLog: * config/tc-riscv.c: Add 1.12 to the usage message. * configure: Regenerate. * configure.ac: Add 1.12 to the help/usage message. * po/fr.po: Same. * po/ru.po: Same. * po/uk.po: Same. 2022-01-07 Tom Tromey Do not use CC_HAS_LONG_LONG ax.cc checks CC_HAS_LONG_LONG, but nothing defines this. However, PRINTF_HAS_LONG_LONG is checked in configure. This patch removes the former and keeps the latter. This is PR remote/14976 (filed by me in 2012, lol). I'm checking this in. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=14976 2022-01-07 Andrew Burgess gdb/doc: shorten some source lines, and prevent some line breaks Building on the previous commit, this makes use of a trailing @ to split long @deffn lines in the guile.texi source file. This splitting doesn't change how the document is laid out by texinfo. I have also wrapped keyword and argument name pairs in @w{...} to prevent line breaks appearing between the two. I've currently only done this for the longer @deffn lines, where a line break is possible. This makes the @deffn lines much nicer to read in the generated pdf. 2022-01-07 Andrew Burgess gdb/doc: Remove (...) around guile procedure names in @deffn lines Most guile procedures in the guile.texi file are defined like: @deffn {Scheme Procedure} name arg1 arg2 arg3 But there are two places where we do this: @deffn {Scheme Procedure} (name arg1 arg2 arg3) Notice the added (...). Though this does represent how a procedure call is written in scheme, it's not the normal style throughout the manual. I also checked the 'info guile' info page to see how they wrote there declarations, and they use the first style too. The second style also has the drawback that index entries are added as '(name', and so they are grouped in the '(' section of the index, which is not very user friendly. In this commit I've changed the definitions of make-command and make-parameter to use the first style. The procedure declaration lines can get pretty long with all of the arguments, and this was true for both of the procedures I am changing in this commit. I have made use of a trailing '@' to split the deffn lines, and keep them under 80 characters in the texi source. This makes no difference to how the final document looks. Finally, our current style for keyword arguments, appears to be: [#:keyword-name argument-name] I don't really understand the reason for this, 'info guile' just seems to use: [#:keyword-name] which seems just as good to me. But I don't propose to change that just now. What I do notice though, is that sometimes, texinfo will place a line break between the keyword-name and the argument-name, for example, the pdf of make-command is: make-command name [#:invoke invoke] [#:command-class command-class] [#:completer-class completer] [#:prefix? prefix] [#:doc doc-string] Notice the line break after '#:command-class' and after '#:doc', neither of which are ideal. And so, for the two commands I am changing in this commit, I have made use of @w{...} to prevent line breaks between the keyword-name and the argument-name. Now the pdf looks like this: make-command name [#:invoke invoke] [#:command-class command-class] [#:completer-class completer] [#:prefix? prefix] [#:doc doc-string] Which seems much better. I'll probably update the other deffn lines at some point. 2022-01-07 Pavel Mayorov Revert previous delta to debug.c. Replace with patch to reject indirect types that point to indirect types. PR 28718 * dwarf.c: Revert previous delta. (debug_get_real_type): Reject indirect types that point to indirect types. (debug_get_type_name, debug_get_type_size, debug_write_type): Likewise. 2022-01-07 Nelson Chu RISC-V: Updated the default ISA spec to 20191213. Update the default ISA spec from 2.2 to 20191213 will change the default version of i from 2.0 to 2.1. Since zicsr and zifencei are separated from i 2.1, users need to add them in the architecture string if they need fence.i and csr instructions. Besides, we also allow old ISA spec can recognize zicsr and zifencei, but we won't output them since they are already included in the i extension when i's version is less than 2.1. bfd/ * elfxx-riscv.c (riscv_parse_add_subset): Allow old ISA spec can recognize zicsr and zifencei. gas/ * config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Updated to 20191213. * testsuite/gas/riscv/csr-version-1p10.d: Added zicsr to -march since the default version of i is 2.1. * testsuite/gas/riscv/csr-version-1p11.d: Likewise. * testsuite/gas/riscv/csr-version-1p12.d: Likewise. * testsuite/gas/riscv/csr-version-1p9p1.d: Likewise. * testsuite/gas/riscv/option-arch-03.d: Updated i's version to 2.1. * testsuite/gas/riscv/option-arch-03.s: Likewise. ld/ * testsuite/ld-riscv-elf/call-relax.d: Added zicsr to -march since the default version of i is 2.1. * testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated i's version to 2.1. * testsuite/ld-riscv-elf/attr-merge-arch-01a.s: Likewise. * testsuite/ld-riscv-elf/attr-merge-arch-01b.: Likewise. * testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-arch-02a.s: Likewise. * testsuite/ld-riscv-elf/attr-merge-arch-02b.s: Likewise. * testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise. * testsuite/ld-riscv-elf/attr-merge-arch-03a.s: Likewise. * testsuite/ld-riscv-elf/attr-merge-arch-03b.s: Likewise. * testsuite/ld-riscv-elf/attr-merge-arch-failed-02.d: Added zifencei into Tag_RISCV_arch since it is added implied when i's version is larger than 2.1. 2022-01-07 Alan Modra Move elf_backend_always_size_sections earlier * elflink.c (bfd_elf_size_dynamic_sections): Move plt/got init earlier and call elf_backend_always_size_sections at the start of this function. 2022-01-07 GDB Administrator Automatic date update in version.in 2022-01-06 H.J. Lu ldelfgen.c: Add missing newlines when calling einfo * ldelfgen.c (ldelf_map_segments): Add the missing newline to einfo. 2022-01-06 Nick Clifton Fix a stack exhaustion bug parsing malicious STABS format debug information. PR 28718 * debug.c (debug_write_type): Allow for malicious recursion via indirect debug types. 2022-01-06 Richard Sandiford aarch64: Add support for new SME instructions This patch adds support for three new SME instructions: ADDSPL, ADDSVL and RDSVL. They behave like ADDPL, ADDVL and RDVL, but read the streaming vector length instead of the current vector length. opcodes/ * aarch64-tbl.h (aarch64_opcode_table): Add ADDSPL, ADDSVL and RDSVL. * aarch64-dis-2.c: Regenerate. gas/ * testsuite/gas/aarch64/sme.s, testsuite/gas/aarch64/sme.d: Add tests for ADDSPL, ADDSVL and RDSVL. 2022-01-06 Tom Tromey Use target_announce_detach in more targets target_announce_detach was added in commit 0f48b757 ("Factor out "Detaching from program" message printing"). There, Pedro wrote: (For now, I left the couple targets that print this a bit differently alone. Maybe this could be further pulled out into infcmd.c. If we did that, and those targets want to continue printing differently, this new function could be converted to a target method.) It seems to me that the differences aren't very big, and in some cases other targets handled the output a bit more nicely. In particular, some targets will print a different message when exec_file==NULL, rather than printing the same output with an empty string as exec_file. This patch incorporates the nicer output into target_announce_detach, then changes the remaining ports to use this function. 2022-01-06 Tom Tromey Introduce target_announce_attach This introduces target_announce_attach, by analog with target_announce_detach. Then it converts existing targets to use this, rather than emitting their own output by hand. 2022-01-06 Andrew Burgess gdb: make use add_setshow_prefix_cmd in gnu-nat.c In gnu-nat.c we currently implement some set/show prefix commands "manually", that is, we call add_prefix_cmd, and assign a set and show function to each prefix command. These set/show functions print an error indicating that the user didn't type a complete command. If we instead switch to using add_setshow_prefix_cmd then we can delete the set/show functions, GDB provides some default functions, which give a nice help style summary that lists all of the available sub-commands, along with a one line summary of what each does. Though this clearly changes the existing behaviour, I think this change is acceptable as the new behaviour is more inline with other set/show prefix commands, and the new behaviour is more informative. This change will conflict with Tom's change here: https://sourceware.org/pipermail/gdb-patches/2022-January/184724.html Where Tom changes the set/show functions that I delete. My suggestion is that the set/show functions still be deleted even after Tom's patch (or instead of Tom's patch). For testing I've build GDB on GNU/Hurd, and manually tested these functions. I did a grep over the testsuite, and don't believe the existing error messages are being checked for in any tests. 2022-01-06 Tom Tromey Use warning in windows-nat error messages A warning in windows-nat.c can be converted to use the warning function. As a side effect, this arranges for the output to be sent to gdb_stderr. 2022-01-06 Tom Tromey Clean up some dead code in windows-tdep.c windows-tdep.c checks the result of xmalloc, which isn't necessary. I initially removed this dead check, but then went a bit further and modified the code so that some "goto"s and explicit memory management could be removed. Then, I added a couple of missing bounds checks. I believe this also fixes a possible bug with a missing 0-termination of a string. I am not certain, but that is why I think the existing code allocates a buffer that is 1 byte too long -- but then it fails to set this byte to 0. 2022-01-06 Tom Tromey Avoid crash in language_info language_info calls: show_language_command (NULL, 1, NULL, NULL); ... "knowing" that show_language_command does not use its ui_file parameter. However, this was changed in commit 7514a661 ("Consistently Use ui_file parameter to show callbacks"). This patch changes language_info to pass a ui_file. It took a while to write the test -- this function is only called when 'verbose' is on and when switching the "expected" language in auto mode. 2022-01-06 Tom Tromey Fix some failures in langs.exp langs.exp currently has some fails for me because the stack trace includes full paths to the source files. FAIL: gdb.base/langs.exp: up to foo in langs.exp FAIL: gdb.base/langs.exp: up to cppsub_ in langs.exp FAIL: gdb.base/langs.exp: up to fsub in langs.exp This fixes the failures by making the filename regexps a bit more lax. 2022-01-06 Jan Beulich x86: drop NoAVX insn attribute To avoid issues like that addressed by 6e3e5c9e4181 ("x86: extend SSE check to PCLMULQDQ, AES, and GFNI insns"), base the check on opcode attributes and operand types. x86: drop NoAVX from POPCNT With the introduction of CpuPOPCNT the NoAVX attribute has become meaningless for POPCNT. x86: drop some "comm" template parameters As already indicated in a remark when introducing these templates, the "commutative" attribute is ignored for legacy encoding templates. Hence it is possible to shorten a number of templates by specifying C directly rather than through a template parameter. I think this helps readability a bit. x86: templatize FMA insn templates The operand ordering portion of the mnemonics repeats, causing a flurry of almost identical templates. Abstract this out. x86-64: restrict PC32 -> PLT32 conversion Neither non-64-bit code nor uses with a non-zero offset from a symbol should be converted to PLT32, as an eventual PLT entry would not express what was requested. 2022-01-06 Lancelot SIX gdb: Fix copyright year in gdb/testsuite/gdb.base/inferior-clone.exp I just realized that I forgot to update the year before pushing the patch that created this file. Since it landed after the global copyright year update have been done, this file’s copyright year is updated. This patch fixes that. Change-Id: I280f7d86e02d38425f7afdcf19a1c3500d51c23f 2022-01-06 Mike Frysinger sim: ppc: migrate to standard uintXX_t types Drop the sim-specific unsignedXX types and move to the standard uintXX_t types that C11 provides. sim: common: migrate to standard uintXX_t types Drop the sim-specific unsignedXX types and move to the standard uintXX_t types that C11 provides. sim: igen: migrate to standard uintXX_t types Move off the custom local 64-bit types and to the standard uintXX_t types that C11 provides. sim: mips: migrate to standard uintXX_t types Move off the sim-specific unsignedXX types and to the standard uintXX_t types that C11 provides. sim: cris: migrate to standard uintXX_t types Move off the sim-specific unsignedXX types and to the standard uintXX_t types that C11 provides. sim: iq2000: migrate to standard uintXX_t types Move off the sim-specific unsignedXX types and to the standard uintXX_t types that C11 provides. sim: synacor: migrate to standard uintXX_t types Move off the sim-specific unsignedXX types and to the standard uintXX_t types that C11 provides. sim: msp430: migrate to standard uintXX_t types Move off the sim-specific unsignedXX types and to the standard uintXX_t types that C11 provides. sim: riscv: migrate to standard uintXX_t types Move off the sim-specific unsignedXX types and to the standard uintXX_t types that C11 provides. sim: bfin: migrate to standard uintXX_t types Move off the sim-specific unsignedXX types and to the standard uintXX_t types that C11 provides. sim: testsuite: migrate to standard uintXX_t types This old code setup its own uintXX types, but since we require C11 now, we can assume the standard uintXX_t types exist and use them. sim: erc32: migrate to standard uintXX_t types This old port setup its own uintXX types, but since we require C11 now, we can assume the standard uintXX_t types exist and use them. sim: mn10300: migrate to standard uintXX_t types This old port setup its own uintXX types, but since we require C11 now, we can assume the standard uintXX_t types exist and use them. sim: v850: migrate to standard uintXX_t types This old port setup its own uintXX types, but since we require C11 now, we can assume the standard uintXX_t types exist and use them. 2022-01-06 Mike Frysinger sim: m68hc11: migrate to standard uintXX_t types This old port setup its own uintXX types, but since we require C11 now, we can assume the standard uintXX_t types exist and use them. Also migrate off the sim-specific unsignedXX types. 2022-01-06 Mike Frysinger sim: d10v: migrate to standard uintXX_t types This old port setup its own uintXX types, but since we require C11 now, we can assume the standard uintXX_t types exist and use them. Also migrate off the sim-specific unsignedXX types. 2022-01-06 Mike Frysinger sim: cr16: migrate to standard uintXX_t types This old port setup its own uintXX types, but since we require C11 now, we can assume the standard uintXX_t types exist and use them. Also migrate off the sim-specific unsignedXX types. 2022-01-06 GDB Administrator Automatic date update in version.in 2022-01-05 H.J. Lu x86: Add elf_x86_allocate_local_got_info Add elf_x86_allocate_local_got_info to allocate x86 GOT info for local symbols. * elf32-i386.c (elf_i386_check_relocs): Call elf_x86_allocate_local_got_info. * elf64-x86-64.c (elf_x86_64_check_relocs): Likewise. * elfxx-x86.h (elf_x86_allocate_local_got_info): New. 2022-01-05 Vladimir Mezentsev opcodes: Make i386-dis.c thread-safe Improve thread safety in print_insn_i386_att, print_insn_i386_intel and print_insn_i386 by removing the use of static variables. Tested on x86_64-pc-linux-gnu. 2022-01-04 Vladimir Mezentsev * i386-dis.c: Make print_insn_i386_att, print_insn_i386_intel and print_insn_i386 thread-safe 2022-01-05 H.J. Lu doc: Replace =frame-interp with =frames-interp The actual objdump and readelf option name is =frames-interp, not =frames-interp. PR binutils/28747 * doc/debug.options.texi: Replace =frame-interp with =frames-interp. 2022-01-05 Tom Tromey Change riscv_return_value to use RETURN_VALUE_ABI_PRESERVES_ADDRESS Internally, AdaCore has a test that is equivalent to (really a direct translation of) gdb.base/gnu_vector.exp. On 32-bit RISC-V, the "return" part of this test fails. Joel tracked this down to riscv_return_value returning RETURN_VALUE_ABI_RETURNS_ADDRESS. Using RETURN_VALUE_ABI_PRESERVES_ADDRESS is more correct here, and fixes the bug. I tested this for both 32- and 64-bit RISC-V using the AdaCore internal test suite, and Andrew Burgess tested it using gnu_vector.exp. 2022-01-05 Tom Tromey Filtered output cleanup in expression dumping Most of the expression-dumping code uses filtered output, but a few functions did not. This patch cleans up these instance. Note that this won't cause any behavior change, because the only calls to dump_prefix_expression pass in gdb_stdlog. However, in the long run it's easier to audit the code if the number of uses of _unfiltered is reduced. 2022-01-05 Tom Tromey Use filtered output in terminal_info implementations This changes one terminal_info implementation, and default_terminal_info, to use filtered output. Other implementations of this method already use filtered output. I can't compile go32-nat.c, so this is a 'best effort' patch. 2022-01-05 Tom Tromey Use filtered output in gnu-nat.c commands gnu-nat.c has a number of ordinary commands that should use filtered output. In a few cases, I changed the output to use gdb_stderr as well. I can't compile this file, so this patch is split out as a "best effort". Use filtered output in *-tdep commands Various targets introduce their own commands, which then use unfiltered output. It's better to use filtered output by default, so this patch fixes the instances I found. Use filtered output in btrace-related commands This changes btrace.c and record-btrace.c to use filtered output in the commands implemented there. Use filtered output in some dumping commands There are several commands that may optionally send their output to a file -- they take an optional filename argument and open a file. This patch changes these commands to use filtered output. The rationale here is that, when printing to gdb_stdout, filtering is appropriate -- it is, and should be, the default for all commands. And, when writing to a file, paging will not happen anyway (it only happens when the stream==gdb_stdout), so using the _filtered form will not change anything. Use filtered output in kill command This changes the kill command to use filtered output. I split this one into its own patch because, out of an abundance of caution, I changed the function to call bfd_cache_close_all a bit earlier, in case pagination caused an exception. 2022-01-05 Tom Tromey Use filtered output in ordinary commands Many otherwise ordinary commands choose to use unfiltered output rather than filtered. I don't think there's any reason for this, so this changes many such commands to use filtered output instead. Note that complete_command is not touched due to a comment there explaining why unfiltered output is believed to be used. 2022-01-05 Tom Tromey Use filtered output in language_info Change language_info to use filtered output. This is ok because the sole caller uses filtered output elsewhere, and because this function calls show_language_command, which also uses filtered output. Use filtered output in files_info implementations This changes the implementations of the target files_info method to use filtered output. This makes sense because the sole caller of this method is an ordinary command (info_program_command). This patch changes this command to use filtered output as well. Use filtered output in target-descriptions.c target-descriptions.c uses unfiltered output. However, if you happen to invoke this command interactively, it's probably better for it to use filtering. For non-interactive use, this doesn't matter. Use filtered output for gdbarch dump This changes gdbarch dumping to use filtered output. This seems a bit better to me, both on the principle that this is an ordinary command, and because the output can be voluminous, so it may be nice to stop in the middle. 2022-01-05 Tom Tromey Implement putstr and putstrn in ui_file In my tour of the ui_file subsystem, I found that fputstr and fputstrn can be simplified. The _filtered forms are never used (and IMO unlikely to ever be used) and so can be removed. And, the interface can be simplified by removing a callback function and moving the implementation directly to ui_file. A new self-test is included. Previously, I think nothing was testing this code. Regression tested on x86-64 Fedora 34. 2022-01-05 Tom Tromey Change how versioned symbols are recorded A change to BFD caused a gdb regression when using the Ada "catch exception" feature. The bug is visible when a shared library throws an exception that is caught in the main executable. This was discussed here: https://sourceware.org/pipermail/binutils/2021-July/117538.html This patch implements Alan's proposed fix, namely to use VERSYM_HIDDEN rather than the name when deciding to install a version-less symbol. The internal test case is identical to the catch_ex_std.exp that is in-tree, so I haven't added a new test. I could not make that one fail on x86-64 Linux, though. It's possible that maybe I'd have to update the system linker first, but I didn't want to try that. Regression tested on x86-64 Fedora 32. 2022-01-05 Hannes Domani Fix inferior_thread attribute in new_thread event Commit 72ee03ff58 fixed a use-after-move bug in add_thread_object, but it changed the inferior_thread attribute to contain the inferior instead of the actual thread. This now uses the thread_obj in its new location instead. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28429 2022-01-05 Tom Tromey Simplify execute_control_commands_to_string execute_control_commands_to_string can be rewritten in terms of execute_fn_to_string, which consolidates some knowledge about which streams to redirect. Regression tested on x86-64 Fedora 34. 2022-01-05 Tom Tromey Do not print anything when self-backtrace unavailable Right now, gdb's self-backtrace feature will still print something when a backtrace is unavailable: sig_write (_("----- Backtrace -----\n")); [...] sig_write (_("Backtrace unavailable\n")); sig_write ("---------------------\n"); However, if GDB_PRINT_INTERNAL_BACKTRACE is undefined, it seems better to me to print nothing at all. This patch implements this change. It also makes a couple of other small changes in this same module: it adds a header guard to bt-utils.h, and it protects the definitions of gdb_internal_backtrace_1 with a check of GDB_PRINT_INTERNAL_BACKTRACE. 2022-01-05 Tom Tromey Fix pager regression The patch to fix paging with redirection caused a regression in the internal AdaCore test suite. The problem occurs when running an MI command from the CLI using interpreter-exec, when paging is enabled. This scenario isn't covered by the current test suite, so this patch includes a new test. The problem is that, in this situation, MI does: fputs_unfiltered (strcmp (context->command, "target-select") == 0 ? "^connected" : "^done", mi->raw_stdout); Here raw_stdout is a stdio_file wrapping stdout, so the pager thinks that it is ok to buffer the output. However, in this setup, it isn't ok, and flushing the wrap buffer doesn't really work properly. Also, MI next does: mi_out_put (uiout, mi->raw_stdout); ... but this uses ui_file::write, which also doesn't flush the wrap buffer. I think all this will be fixed by the pager rewrite series I'm working on. However, in the meantime, adding the old gdb_stdout check back to the pager fixes this problem. Regression tested on x86-64 Fedora 34. 2022-01-05 H.J. Lu elf: Set p_align to the minimum page size if possible Currently, on 32-bit and 64-bit ARM, it seems that ld generates p_align values of 0x10000 even if no section alignment is greater than 0x1000. The issue is more general and probably affects other targets with multiple page sizes. While file layout absolutely must take 64K page size into account, that does not have to be reflected in the p_align value. If running on a 64K kernel, the file will be loaded at a 64K page boundary by necessity. On a 4K kernel, 64K alignment is not needed. The glibc loader has been fixed to honor p_align: https://sourceware.org/bugzilla/show_bug.cgi?id=28676 similar to kernel: commit ce81bb256a224259ab686742a6284930cbe4f1fa Author: Chris Kennelly Date: Thu Oct 15 20:12:32 2020 -0700 fs/binfmt_elf: use PT_LOAD p_align values for suitable start address This means that on 4K kernels, we will start to do extra work for 64K p_align, but this pointless for pretty much all binaries (whose section alignment rarely exceeds 16). The minimum page size is used, instead of the maximum section alignment due to this glibc bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28688 It has been fixed in glibc 2.35. But linker output must work on existing glibc binaries. 1. Set p_align to the minimum page size while laying out segments aligning to the maximum page size or section alignment. The run-time loader can align segments to the minimum page size or above, depending on system page size. 2. If -z max-page-size=NNN is used, p_align will be set to the maximum page size or the largest section alignment. 3. If a section requires alignment higher than the minimum page size, don't set p_align to the minimum page size. 4. If a section requires alignment higher than the maximum page size, set p_align to the section alignment. 5. For objcopy, when the minimum page size != the maximum page size, p_align may be set to the minimum page size while segments are aligned to the maximum page size. In this case, the input p_align will be ignored and the maximum page size will be used to align the ouput segments. 6. Update linker to disallow the common page size > the maximum page size. 7. Update linker to avoid the common page size > the maximum page size. 8. Adjust pru_irq_map-1.d to expect p_align == sh_addralign: Section Headers: [Nr] Name Type Addr Off Size ES Flg Lk Inf Al [ 0] NULL 00000000 000000 000000 00 0 0 0 [ 1] .text PROGBITS 20000000 00007c 000004 00 AX 0 0 4 ... Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align LOAD 0x000074 0x00000000 0x00000000 0x00008 0x00008 RW 0x1 LOAD 0x00007c 0x20000000 0x20000000 0x00004 0x00004 R E 0x4 vs. Section Headers: [Nr] Name Type Addr Off Size ES Flg Lk Inf Al [ 0] NULL 00000000 000000 000000 00 0 0 0 [ 1] .text PROGBITS 20000000 00007c 000004 00 AX 0 0 4 ... Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align LOAD 0x000074 0x00000000 0x00000000 0x00008 0x00008 RW 0x1 LOAD 0x00007c 0x20000000 0x20000000 0x00004 0x00004 R E 0x1 To enable this linker optimization, the backend should define ELF_P_ALIGN to ELF_MINPAGESIZE. bfd/ PR ld/28689 PR ld/28695 * elf-bfd.h (elf_backend_data): Add p_align. * elf.c (assign_file_positions_for_load_sections): Set p_align to the default p_align value while laying out segments aligning to maximum page size or section alignment. (elf_is_p_align_valid): New function. (copy_elf_program_header): Call elf_is_p_align_valid to determine if p_align is valid. * elfxx-target.h (ELF_P_ALIGN): New. Default to 0. (elfNN_bed): Add ELF_P_ALIGN. * elfxx-x86.h (ELF_P_ALIGN): New. Set to ELF_MINPAGESIZE. include/ PR ld/28689 PR ld/28695 * bfdlink.h (bfd_link_info): Add maxpagesize_is_set. ld/ PR ld/28689 PR ld/28695 * emultempl/elf.em (gld${EMULATION_NAME}_handle_option): Set link_info.maxpagesize_is_set for -z max-page-size=NNN. * ldelf.c (ldelf_after_parse): Disallow link_info.commonpagesize > link_info.maxpagesize. * testsuite/ld-elf/elf.exp: Pass -z max-page-size=0x4000 to linker to build mbind2a and mbind2b. * testsuite/ld-elf/header.d: Add -z common-page-size=0x100. * testsuite/ld-elf/linux-x86.exp: Add PR ld/28689 tests. * testsuite/ld-elf/p_align-1.c: New file. * testsuite/ld-elf/page-size-1.d: New test. * testsuite/ld-elf/pr26936.d: Add -z common-page-size=0x1000. * testsuite/ld-elf/seg.d: Likewise. * testsuite/ld-scripts/rgn-at5.d: Likewise. * testsuite/ld-pru/pru_irq_map-1.d: Append 1 to name. Adjust expected PT_LOAD segment alignment. * testsuite/ld-pru/pru_irq_map-2.d: Append 2 to name. * testsuite/ld-scripts/pr23571.d: Add -z max-page-size=0x1000. 2022-01-05 Alan Modra Adjust quoted-sym-names test Some targets restrict symbol addresses in .text to instruction boundaries. * testsuite/gas/all/quoted-sym-names.s: Define syms in .data. * testsuite/gas/all/quoted-sym-names.d: Adjust to suit. 2022-01-05 Alan Modra infinite recursion detected in gold testcase gold/testsuite/icf_test.cc:32:5: error: infinite recursion detected [-Werror=infinite-recursion] 32 | int kept_func() | ^~~~~~~~~ * testsuite/icf_test.cc: Avoid infinite recursion error. 2022-01-05 GDB Administrator Automatic date update in version.in 2022-01-04 H.J. Lu ld/x86: Update -z report-relative-reloc Use 0x%v, instead of bfd_sprintf_vma, to report relative relocations. Change linker relative relocations report from tmpdir/dump: R_X86_64_IRELATIVE (offset: 0x0000000000002000, info: 0x0000000000000025, addend: 0x0000000000001007) against 'ifunc' for section '.data.rel.ro.local' in tmpdir/report-reloc-1.o to tmpdir/dump: R_X86_64_IRELATIVE (offset: 0x2000, info: 0x25, addend: 0x1007) against 'ifunc' for section '.data.rel.ro.local' in tmpdir/report-reloc-1.o bfd/ * elfxx-x86.c (_bfd_x86_elf_link_report_relative_reloc): Use 0x%v instead of bfd_sprintf_vma. ld/ * testsuite/ld-i386/report-reloc-1.l: Updated. * testsuite/ld-x86-64/report-reloc-1.l: Likewise. 2022-01-04 H.J. Lu ld: Improve thin archive member error message Improve thin archive member error message with: ld: libbar.a(bar.o): error opening thin archive member: No such file or directory instead of ld: libbar.a: error adding symbols: No such file or directory PR ld/28722 * archive.c (_bfd_get_elt_at_filepos): Add a pointer argument for struct bfd_link_info. Call linker callback when failing to open thin archive member. (_bfd_generic_get_elt_at_index): Pass NULL to _bfd_get_elt_at_filepos. (bfd_generic_openr_next_archived_file): Likewise. * coff-alpha.c (alpha_ecoff_get_elt_at_filepos): Add a pointer argument for struct bfd_link_info and pass it to _bfd_get_elt_at_filepos. (alpha_ecoff_openr_next_archived_file): Pass NULL to _bfd_get_elt_at_filepos. (alpha_ecoff_get_elt_at_index): Likewise. * coff-rs6000.c (_bfd_xcoff_openr_next_archived_file): Likewise. * ecoff.c (ecoff_link_add_archive_symbols): Pass info to backend->get_elt_at_filepos. * elflink.c (elf_link_is_defined_archive_symbol): info to _bfd_get_elt_at_filepos. * libbfd-in.h (_bfd_get_elt_at_filepos): Add a pointer argument for struct bfd_link_info. * libbfd.h: Regenerate. * libecoff.h (ecoff_backend_data): Add a pointer argument for struct bfd_link_info to get_elt_at_filepos. * linker.c (_bfd_generic_link_add_archive_symbols): Pass info to _bfd_get_elt_at_filepos. 2022-01-04 Lancelot SIX gdb/testsuite: fix inferior-clone.exp for native-extended-gdbserver 003aae076207dbf32f98ba846158fc32669ef85f (gdb: Copy inferior properties in clone-inferior) introduced a testcase that fails when testing with the native-extended-gdbserver board: Running ../gdb/testsuite/gdb.base/inferior-clone.exp ... FAIL: gdb.base/inferior-clone.exp: inferior 2: clone-inferior FAIL: gdb.base/inferior-clone.exp: inferior 3: clone-inferior The error is as follows: clone-inferior [New inferior 2] Added inferior 2 on connection 1 (extended-remote localhost:2346) (gdb) FAIL: gdb.base/inferior-clone.exp: inferior 2: clone-inferior This fails because the testcase only expect the 'Added inferior 2' part of the message. The 'on connection 1 [...]' part is unexpected. Fix by adjusting the testcase to a account for the possible trailing part of the message. Tested on x86_64-linux with native-extende-gdbserver and unix boards. Change-Id: Ie3d6f04c9ffe9cab1fbda8ddf4935ee09b858c7a 2022-01-04 Nick Clifton Add ATTRIBUTE_UNUSED to load_build_id_debug_file()'s main_filename parameter. 2022-01-04 Andrew Burgess gdb: don't pass nullptr to sigwait I tried building GDB on GNU/Hurd, and ran into this warning: gdbsupport/scoped_ignore_signal.h:78:16: error: null argument where non-null required (argument 2) [-Werror=nonnull] This is because in this commit: commit 99624310dd82542c389c89c2e55d8cae36bb74e1 Date: Sun Jun 27 15:13:14 2021 -0400 gdb: fall back on sigpending + sigwait if sigtimedwait is not available A call to sigwait was introduced that passes nullptr as the second argument, this call is only reached if sigtimedwait is not supported. The original patch was written for macOS, I assume on that target passing nullptr as the second argument is fine. On my GNU/Linux box, the man-page for sigwait doesn't mention that nullptr is allowed for the second argument, so my assumption would be that nullptr is not OK, and, if I change the '#ifdef HAVE_SIGTIMEDWAIT' introduced by the above patch to '#if 0', and rebuild on GNU/Linux, I see the same warning that I see on GNU/Hurd. I propose that we stop passing nullptr as the second argument to sigwait, and instead pass a valid int pointer. The value returned in the int can then be used in an assert. For testing, I (locally) made the change to the #ifdef I mentioned above, compiled GDB, and ran the usual tests, this meant I was using sigwait instead on sigtimedwait on GNU/Linux, I saw no regressions. 2022-01-04 Nick Clifton Remove a spurious debugging message. PR 28716 * dwarf.c (load_build_id_debug_file): Remove spurious printf. 2022-01-04 Tom de Vries [gdb/build] Fix build breaker in gdb/cli/cli-logging.c Fix build breaker in gdb/cli/cli-logging.c: ... gdb/cli/cli-logging.c: In function \ ‘void show_logging_enabled(ui_file*, int, cmd_list_element*, const char*)’: gdb/gdbsupport/gdb_locale.h:28:28: error: cannot convert ‘char*’ to ‘ui_file*’ 28 | # define _(String) gettext (String) | ~~~~~~~~^~~~~~~~ | | | char* gdb/cli/cli-logging.c:202:25: note: in expansion of macro ‘_’ 202 | fprintf_unfiltered (_("on: Logging is enabled.\n")); | ^ ... Build and tested on x86_64-linux. Fixes: 45aec4e5ed8 ("[gdb/cli] Improve show logging output") 2022-01-04 Jan Beulich x86/Intel: correct VFPCLASSP{S,D} handling when displacement is present fits_in_disp8() can be called before ambiguous operands get resolved or rejected (in process_suffix()), which requires that i.memshift be non-negative to avoid an internal error. This case wasn't covered by 6c0946d0d28d ("x86: correct VFPCLASSP{S,D} operand size handling"). 2022-01-04 Jan Beulich gas: rework handling of backslashes in quoted symbol names Strange effects can result from the present handling, e.g.: .if 1 "backslash\\": .endif yields first (correctly) "missing closing `"'" but then also "invalid character '\' in mnemonic" and further "end of file inside conditional". Symbols names ending in \ are in principle not expressable with that scheme. Instead of recording whether a backslash was seen, inspect the subsequent character right away. Only accept \\ (meaning a single backslash in the resulting symbol name) and \" (meaning an embedded double quote in the resulting symbol name) for now, warning about any other combination. While perhaps not necessary immediately, also permit concatenated strings to form a symbol name. This may become useful if going forward we would want to support \ or \x sequences, where closing and re-opening quotes can be useful to delimit such sequences. The ELF "Multibyte symbol names" test gets switched away from using .set, as that would now also mean excluding nios2 and pru. By using .equiv instead, even the existing #notarget can be dropped. (For h8300 the .section directive additionally needs attributes specified, to avoid a target specific warning.) 2022-01-04 GDB Administrator Automatic date update in version.in 2022-01-03 Tom de Vries [gdb/cli] Improve show logging output Before commit 3b6acaee895 "Update more calls to add_prefix_cmd" we had the following output for "show logging": ... $ gdb -q -batch -ex "set trace-commands on" \ -ex "set logging off" \ -ex "show logging" \ -ex "set logging on" \ -ex "show logging" +set logging off +show logging Future logs will be written to gdb.txt. Logs will be appended to the log file. Output will be logged and displayed. Debug output will be logged and displayed. +set logging on +show logging Currently logging to "gdb.txt". Logs will be appended to the log file. Output will be logged and displayed. Debug output will be logged and displayed. ... After that commit we have instead: ... +set logging off +show logging debugredirect: The logging output mode is off. file: The current logfile is "gdb.txt". overwrite: Whether logging overwrites or appends to the log file is off. redirect: The logging output mode is off. +set logging on +show logging debugredirect: The logging output mode is off. file: The current logfile is "gdb.txt". overwrite: Whether logging overwrites or appends to the log file is off. redirect: The logging output mode is off. ... which gives less clear output for some subcommands. OTOH, it's explicit about whether boolean values are on or off. The new text seems to have been chosen to match the set/show help texts: ... (gdb) help show logging Show logging options. List of show logging subcommands: show logging debugredirect -- Show the logging debug output mode. show logging file -- Show the current logfile. show logging overwrite -- \ Show whether logging overwrites or appends to the log file. show logging redirect -- Show the logging output mode. ... Make the show logging messages more clear, while still keep the boolean values explicit, such that we have: ... $ ./gdb.sh -q -batch -ex "show logging" logging debugredirect: off: \ Debug output will go to both the screen and the log file. logging enabled: off: Logging is disabled. logging file: The current logfile is "gdb.txt". logging overwrite: off: Logging appends to the log file. logging redirect: off: Output will go to both the screen and the log file. ... Tested on x86_64-linux. 2022-01-03 Tom Tromey Fix use of 'printf' in gdbtypes.c An earlier patch of mine, commit 64b7cc50 ("Remove gdb_print_host_address") inadvertently changed a function in gdbtypes.c to use printf rather than printf_filtered. This patch fixes the problem. Fix regression in page-logging.exp Simon and Tom pointed out that page-logging.exp failed on their machines. Tom tracked this down to the "width" setting. Since there's no need in the test to change the width, it seems simplest to remove the setting. I confirmed that the test still fails if the fix is backed out, ensuring that the test is still testing what it purports to. Small indentation fix in eval.c I noticed that the AdaCore tree had a small divergence in eval.c -- it had a fix for an indentation problem in binop_promote. I'm checking in this small fix as obvious. 2022-01-03 Tom de Vries [gdb/testsuite] Handle for loop initial decl with gcc 4.8.5 When running test-case gdb.threads/schedlock-thread-exit.exp on a system with system compiler gcc 4.8.5, I run into: ... src/gdb/testsuite/gdb.threads/schedlock-thread-exit.c:33:3: error: \ 'for' loop initial declarations are only allowed in C99 mode ... Fix this by: - using -std=c99, or - using -std=gnu99, in case that's required, or - in the case of the jit test-cases, rewriting the for loops. Tested on x86_64-linux, both with gcc 4.8.5 and gcc 7.5.0. 2022-01-03 GDB Administrator Automatic date update in version.in 2022-01-02 Tom Tromey Update copying.awk for _initialize declaration patch Commit 6c265988 ("gdb: add back declarations for _initialize functions") modified copying.c, but not copying.awk. This patch updates copying.awk to backport the appropriate fix. This way, if copying.awk is run again, it will create the correct output. I'm checking this in as obvious. 2022-01-02 Tom Tromey Use filtered output in print_i387_ext print_i387_ext mostly uses filtered output, but one call in the middle of the function uses the _unfiltered form. This patch fixes this call. I'm checking this in as obvious. 2022-01-02 Alan Modra Update year range in copyright notice of binutils files The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out */po/*.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files. 2022-01-02 GDB Administrator Automatic date update in version.in 2022-01-01 Mike Frysinger gdb: copyright: fix a few comment typos sim: ppc: drop natural types These are almost entirely unused. For the very few places using them, replace with explicit signed types. This matches what was done in the common sim code. sim: mips: clean up bad style/whitespace This doesn't fix all the problems, but grabs a bunch of the more obvious ones. sim: tweak copyright lines for gnulib update-copyright The regex it uses does not like so many leading spaces which causes it to think the files lack copyright. Trim them down so the script can find & update them accordingly. gdb: update sim mips testsuite copyright exemption The sim testsuite was reorganized last year, so update the path. 2022-01-01 Mike Frysinger unify 64-bit bfd checks Move the 64-bit bfd logic out of bfd/configure.ac and into bfd64.m4 under config so it can be shared between all the other subdirs. This replaces want64 with enable_64_bit_bfd which was already being declared, but not used directly. 2022-01-01 Joel Brobecker Update Copyright year in gdb/testsuite/gdb.arch/powerpc-power10.exp This commit updates the copyright year range in the script gdb/testsuite/gdb.arch/powerpc-power10.exp. The update was performed by running gdb/copyright.py again, to make sure that the copyright year range will be automatically updated in years forward. 2022-01-01 Joel Brobecker Fix copyright header in gdb/testsuite/gdb.arch/powerpc-power10.exp The copyright year and holder line is slight malformed, missing a space after a comma, and this is sufficient for gdb's copyright.py script to miss this file during its automated copyright year update. This commit fixes this. 2022-01-01 Joel Brobecker gdb/copyright.py: Add update-netbsd.sh to MULTIPLE_COPYRIGHT_HEADERS Add gdb/syscalls/update-netbsd.sh to the reminder printed at the end of the execution listing all the files where a manual update of the copyright header is needed. This scripts contains some inline code which includes a copyright header. Manual copyright year update of various GDB files This commit updates the copyright year in some files where we have a copyright year outside of the copyright year, and thus are not included in gdb's copyright.py script. 2022-01-01 Joel Brobecker Automatic Copyright Year update after running gdb/copyright.py This commit brings all the changes made by running gdb/copyright.py as per GDB's Start of New Year Procedure. For the avoidance of doubt, all changes in this commits were performed by the script. 2022-01-01 Joel Brobecker Update Copyright Year in gdb, gdbserver and gdbreplay version output This commit changes the copyright year printed by gdb, gdbserver and gdbreplay when printing the tool's version. 2022-01-01 Alan Modra ubsan: next_char_of_string signed integer overflow Squash another totally useless fuzz report that I should have ignored. * read.c (next_char_of_string): Avoid integer overflow. 2022-01-01 Alan Modra ubsan: bfd_mach_o_build_commands shift exponent 64 is too large * mach-o.c (bfd_mach_o_read_section_32): Limit alignment further. (bfd_mach_o_read_section_64): Likewise. 2022-01-01 Alan Modra ubsan: signed integer multiply overflow 9223371018427387904 * 2 cannot be represented in type 'long', yes, but we don't care. * expr.c (expr): Avoid signed overflow. 2022-01-01 Alan Modra asan: Null-dereference in _bfd_xcoff_copy_private_bfd_data sec->output_section will be NULL when objcopy removes sections. * coff-rs6000.c (_bfd_xcoff_copy_private_bfd_data): Protect against objcopy removing sections. 2022-01-01 Alan Modra ubsan: integer overflow in section filepos subtraction * elf.c (assign_file_positions_for_non_load_sections): Avoid signed integer overflow. 2022-01-01 Alan Modra Remove unnecessary ELF_MINPAGESIZE defines The idea of this patch is to make it easy to see which targets (just sparc) have ELF_MINPAGESIZE != ELF_COMMONPAGESIZE. * elf32-arm.c (ELF_MINPAGESIZE): Don't define. * elf32-metag.c: Likewise. * elfnn-aarch64.c: Likewise. * elf64-x86-64.c: Likewise. Also don't redefine a bunch of other macros for l1om elf64-target.h use that are unchanged from default. 2022-01-01 H.J. Lu ld-x86-64: Pass options to linker with "-Wl," * testsuite/ld-x86-64/x86-64.exp: Pass options to linker with "-Wl,". 2022-01-01 GDB Administrator Automatic date update in version.in 2021-12-31 Tom Tromey Do not call reinitialize_more_filter from avr_io_reg_read_command avr_io_reg_read_command is an ordinary gdb command, and so should not be calling reinitialize_more_filter. This patch removes it. I'm checking this in as obvious. Tested by rebuilding. 2021-12-31 H.J. Lu x86: Define check_relocs_failed in elfxx-x86.h * elf32-i386.c (check_relocs_failed): Moved to ... * elfxx-x86.h (check_relocs_failed): Here. New. * elf64-x86-64.c (check_relocs_failed): Removed. Define X86_PCREL_TYPE_P/X86_SIZE_TYPE_P in elfxx-x86.h * elf32-i386.c: Don't include "elf/i386.h". (X86_PCREL_TYPE_P): Removed. (X86_SIZE_TYPE_P): Likewise. (elf_i386_check_relocs): Pass false to NEED_DYNAMIC_RELOCATION_P. (elf_i386_relocate_section): Pass false to GENERATE_DYNAMIC_RELOCATION_P and COPY_INPUT_RELOC_P. * elf64-x86-64.c: Don't include "elf/x86-64.h". (X86_PCREL_TYPE_P): Removed. (X86_SIZE_TYPE_P): Likewise. (elf_x86_64_check_relocs): Pass true to NEED_DYNAMIC_RELOCATION_P and X86_PCREL_TYPE_P. (elf_x86_64_relocate_section): Pass true to X86_PCREL_TYPE_P, X86_SIZE_TYPE_P, GENERATE_DYNAMIC_RELOCATION_P and COPY_INPUT_RELOC_P. * elfxx-x86.c: Don't include "elf/i386.h" nor "elf/x86-64.h". * elfxx-x86.h (X86_64_PCREL_TYPE_P): New. (I386_PCREL_TYPE_P): Likewise. (X86_PCREL_TYPE_P): Likewise. (X86_64_SIZE_TYPE_P): Likewise. (I386_SIZE_TYPE_P): Likewise. (X86_SIZE_TYPE_P): Likewise. (NEED_DYNAMIC_RELOCATION_P): Add IS_X86_64 and pass it to X86_PCREL_TYPE_P. (COPY_INPUT_RELOC_P): Likewise. (GENERATE_DYNAMIC_RELOCATION_P): Add IS_X86_64, pass it to X86_PCREL_TYPE_P and X86_SIZE_TYPE_P. 2021-12-31 Tamar Christina ld: fix coff PE SEH COFF_WITH_pex64 and COFF_WITH_peAArch64 can't be true at the same time. That means that two conditionals that control the sorting of the .pdata section became a falsum. The testsuite doesn't catch this because the linker does the sorting and to link you require library support from the unwinder so we can't test from binutils in isolation. bfd/ChangeLog: 2021-12-31 Tamar Christina PR ld/28682 * peXXigen.c: Fix conditional. 2021-12-31 GDB Administrator Automatic date update in version.in 2021-12-30 GDB Administrator Automatic date update in version.in 2021-12-29 Tom Tromey Use filtered output in show callbacks "show" command callbacks, like most ordinary gdb commands, should use filtered output. I found a few that did not, so this patch changes them to use the filtered form. 2021-12-29 Tom Tromey Consistently Use ui_file parameter to show callbacks I happened to notice that one "show" callback was printing to gdb_stdout rather than to the passed-in ui_file parameter. I went through all such callbacks and fixed them to consistently use the ui_file. Regression tested on x86-64 Fedora 34. 2021-12-29 Tom Tromey Use gdb_stdlog for MI debugging When MI debugging is enabled, the logging output should be sent to gdb_stdlog. This is part of PR gdb/7233. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233 2021-12-29 Tom Tromey Use debug_prefixed_printf_cond_nofunc in index-cache This changes index-cache.c to use debug_prefixed_printf_cond_nofunc. As a side effect, logs are now written to gdb_stdlog. This is part of PR gdb/7233. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233 2021-12-29 Tom Tromey Send minsym logging to gdb_stdlog This changes minsyms.c to send logging output to gdb_stdlog. This is part of PR gdb/7233. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233 2021-12-29 Tom Tromey Use gdb_stdlog for separate debug file logging This changes the separate debug file logging code (spread across two files) to use gdb_stdlog for its output. This is part of PR gdb/7233. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233 2021-12-29 Tom Tromey Use debug_prefixed_printf_cond_nofunc in machoread This changes machoread.c to use debug_prefixed_printf_cond_nofunc. As a side effect, the logs are now written to gdb_stdlog. This is part of PR gdb/7233. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233 2021-12-29 Tom Tromey Use debug_prefixed_printf_cond_nofunc in microblaze.c This changes microblaze.c to use the standard logging macro. As a side effect, logs will now go to gdb_stdlog. This is part of PR gdb/7233. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233 2021-12-29 Tom Tromey Send debugging data to gdb_stdlog in mips-linux-nat.c This changes mips-linux-nat.c to send some logging output to gdb_stdlog, rather than stdout. This is part of PR gdb/7233. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233 2021-12-29 Tom Tromey Send arch-utils error messages to gdb_stderr This changes arch-utils.c to send some error messages to gdb_stderr. This is part of PR gdb/7233. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233 2021-12-29 Tom Tromey Use correct stream for process record output The process record code often emits unfiltered output. In some cases, this output ought to go to gdb_stderr (but see below). In other cases, the output is guarded by a logging variable and so ought to go to gdb_stdlog. This patch makes these changes. Note that in many cases, the output to stderr is followed by a "return -1", which is how process record indicates an error. It seems to me that calling error here would be preferable, because, in many cases, that's all the caller does when it sees a -1. However, I haven't made this change. This is part of PR gdb/7233. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233 2021-12-29 Tom Tromey Send jit.c errors to gdb_stderr jit.c writes some error messages to gdb_stdout, but using gdb_stderr is better. This is part of PR gdb/7233. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=7233 2021-12-29 Tom Tromey Fix logging redirection bug with pager I noticed yesterday that if gdb output is redirected to a file, the pager will still be active. This is irritating, because the output isn't actually visible -- just the pager prompt. Looking in bugzilla, I found that this had been filed 17 years ago, as PR cli/8798. This patch fixes the bug. It changes the pagination code to query the particular ui-file to see if paging is allowable. The ui-file implementations are changed so that only the stdout implementation and a tee (where one sub-file is stdout) can page. Regression tested on x86-64 Fedora 34. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=8798 2021-12-29 Tom Tromey Remove unusual use of core_addr_eq and core_addr_hash gdbtypes.h uses core_addr_eq and core_addr_hash in a weird way: taking the address of a member and then passing this (as a void*) to these functions. It seems better to simply inline the ordinary code here. CORE_ADDR is a scalar so it can be directly compared, and the identity hash function seems safe to assume as well. After this, core_addr_eq and core_addr_hash are unused, so this patch removes them. 2021-12-29 Lancelot SIX gdb: Copy inferior properties in clone-inferior This commit ensures that the following settings are cloned from one inferior to the new one when processing the clone-inferior command: - inferior-tty - environment variables - cwd - args Some of those parameters can be passed as command line arguments to GDB (-args and -tty), so one could expect the clone-inferior to respect those flags. The following debugging session illustrates that: gdb -nx -quiet -batch \ -ex "show args" \ -ex "show inferior-tty" \ -ex "clone-inferior" \ -ex "inferior 2" \ -ex "show args" \ -ex "show inferior-tty" \ -tty=/some/tty \ -args echo foo bar Argument list to give program being debugged when it is started is "foo bar". Terminal for future runs of program being debugged is "/some/tty". [New inferior 2] Added inferior 2. [Switching to inferior 2 [] (/bin/echo)] Argument list to give program being debugged when it is started is "". Terminal for future runs of program being debugged is "". The other properties this commit copies on clone (i.e. CWD and the environment variables) are included since they are related (in the sense that they influence the runtime behavior of the program) even if they cannot be directly set using command line switches. There is a chance that this patch changes existing user workflow. I think that this change is mostly harmless. If users want to start a new inferior based on an existing one, they probably already propagate those settings to the new inferior in some way. Tested on x86_64-linux. Change-Id: I3b1f28b662f246228b37bb24c2ea1481567b363d 2021-12-29 GDB Administrator Automatic date update in version.in 2021-12-28 H.J. Lu elf32-i386: Fix a typo in GOT comments Entry offsets in the global offset table are multiples of 4, not 8. * elf32-i386.c (elf_i386_relocate_section): Fix a typo in GOT comments. 2021-12-28 H.J. Lu bfd: Don't check non-thin archive member file size There is no need to check member file size for thin archive member. * bfdio.c (bfd_bread): Don't check non-thin archive member file size. 2021-12-28 Alan Modra gas reloc sorting In some cases, eg. riscv_pre_output_hook, gas generates out-of-order relocations. Various places in the linker assume relocs are sorted by increasing r_offset, which is normally the case. Provide GAS_SORT_RELOCS to handle unsorted relocs. bfd/ PR 28709 * elf32-nds32.c (nds32_insertion_sort): Make static. * elf32-nds32.h (nds32_insertion_sort): Delete declaration. gas/ PR 28709 * write.c (write_relocs): Implement reloc sorting by r_offset when GAS_SORT_RELOCS. * config/tc-nds32.c (compar_relent, nds32_set_section_relocs): Delete. * config/tc-nds32.h (nds32_set_section_relocs): Don't declare. (SET_SECTION_RELOCS): Don't define. (GAS_SORT_RELOCS): Define. * config/tc-riscv.h (GAS_SORT_RELOCS): Define. 2021-12-28 jiawei ld: Fix testcase errors due to -shared not support. Reviewed-by: Jim Wilson ld/ChangeLog: * testsuite/ld-ctf/ctf.exp: Add shared lib check. * testsuite/ld-plugin/lto.exp: Add lto shared check. 2021-12-28 GDB Administrator Automatic date update in version.in 2021-12-27 H.J. Lu elf: Update comments for check_relocs in elf_backend_data Since commit 5c3261b0e834647cf9eb555320e20871b7854f98 Author: H.J. Lu Date: Mon Oct 16 03:49:54 2017 -0700 ELF: Call check_relocs after opening all inputs check_relocs is called after opening all inputs. * elf-bfd.h (elf_backend_data::check_relocs): Update comments. 2021-12-27 H.J. Lu ld: Remove emultempl/linux.em Remove emultempl/linux.em whose last usage was removed by commit c65c21e1ffd1e02d9970a4bca0b7e384788a50f0 Author: Alan Modra Date: Mon Apr 16 22:14:01 2018 +0930 various i386-aout and i386-coff target removal Also tidies some other aout leftovers in binutils-common.exp. 2021-12-27 GDB Administrator Automatic date update in version.in 2021-12-26 GDB Administrator Automatic date update in version.in 2021-12-25 GDB Administrator Automatic date update in version.in 2021-12-24 Tom Tromey Remove gdb_print_host_address gdb_print_host_address is just a simple wrapper around fprintf_filtered. However, it is readily replaced in all callers by a combination of %s and call to host_address_to_string. This also simplifies the code, so I think it's worthwhile to remove this function. Regression tested on x86-64 Fedora 64. 2021-12-24 Tom Tromey Move gdb_bfd_errmsg to gdb_bfd.c gdb_bfd.c contains most of gdb's BFD-related utility functions. However, gdb_bfd_errmsg is in utils.c. It seemed better to me to move this out of util.[ch] and into the BFD-related file instead. Tested by rebuilding. 2021-12-24 Nelson Chu RISC-V: Rewrite the csr testcases. Maskray (Fangrui Song) had suggested me before that we should combine multiple testcases into one file as possible as we can. So that we can more easily understand what these test cases are testing, and easier to maintain. Therefore, this patch rewrites all csr testcases, to make them more clean. gas/ * testsuite/gas/riscv/csr-fail-nonexistent.d: Renamed from priv-reg-fail-nonexistent testcase. * testsuite/gas/riscv/csr-fail-nonexistent.: Likewise. * testsuite/gas/riscv/csr-fail-nonexistent.s: Likewise. * testsuite/gas/riscv/csr-insns-pseudo-noalias.d: Renamed from priv-reg-pseudo testcase. * testsuite/gas/riscv/csr-insns-pseudo.d: Likewise. * testsuite/gas/riscv/csr-insns-pseudo.s: Likewise. * testsuite/gas/riscv/csr-insns-read-only.d: Renamed from priv-reg-fail-read-only-02 testcase. * testsuite/gas/riscv/csr-insns-read-only.l: Likewise. * testsuite/gas/riscv/csr-insns-read-only.s: Likewise. * testsuite/gas/riscv/h-ext-32.d: Moved hypervisor csrs to csr.s. * testsuite/gas/riscv/h-ext-32.s: Likewise. * testsuite/gas/riscv/h-ext-64.d: Likewise. * testsuite/gas/riscv/h-ext-64.s: Likewise. * testsuite/gas/riscv/csr.s: Renamed from priv-reg.s, and then added the hypervisor csrs. * testsuite/gas/riscv/csr-version-1p9p1.d: The csr testcase when the privileged spec is 1.9.1. Also tested all invalid csr warnings when -mcsr-check is enabled. * testsuite/gas/riscv/csr-version-1p9p1.l: Likewise. * testsuite/gas/riscv/csr-version-1p10.d: Likewise, but the privileged spec is 1.10.. * testsuite/gas/riscv/csr-version-1p10.l: Likewise. * testsuite/gas/riscv/csr-version-1p11.d: Likewise, but the privileged spec is 1.11. * testsuite/gas/riscv/csr-version-1p11.l: Likewise. * testsuite/gas/riscv/csr-version-1p12.d: Likewise, but the privileged spec is 1.12. * testsuite/gas/riscv/csr-version-1p12.l: Likewise. * testsuite/gas/riscv/priv-reg*: Removed or Renamed. 2021-12-24 Vineet Gupta RISC-V: Hypervisor ext: support Privileged Spec 1.12 This is the Hypervisor Extension 1.0 - Hypervisor Memory-Management Instructions HFENCE.VVMA, HFENCE.GVMA, - Hypervisor Virtual Machine Load and Store Instructions HLV.B, HLV.BU, HSV.B, HLV.H, HLV.HU, HLVX.HU, HSB.H, HLV.W, HLV.WU, HLVX.WU, HSV.W, HLV.D, HSV.D - Hypervisor CSRs (some new, some address changed) hstatus, hedeleg, hideleg, hie, hcounteren, hgeie, htval, hip, hvip, htinst, hgeip, henvcfg, henvcfgh, hgatp, hcontext, htimedelta, htimedeltah, vsstatus, vsie, vstvec, vsscratch, vsepc, vscause, vstval, vsip, vsatp, Note that following were added already as part of svinval extension support: HINVAL.GVMA, HINVAL.VVMA Reviewed-by: Palmer Dabbelt Reviewed-by: Nelson Chu bfd/ * cpu-riscv.c (riscv_priv_specs): Added entry for 1.12. * cpu-riscv.h (enum riscv_spec_class): Added PRIV_SPEC_CLASS_1P12. gas/ * config/tc-riscv.c (abort_version): Updated comment. (validate_riscv_insn): Annotate switch-break. * testsuite/gas/riscv/h-ext-32.d: New testcase for hypervisor. * testsuite/gas/riscv/h-ext-32.s: Likewise. * testsuite/gas/riscv/h-ext-64.d: Likewise. * testsuite/gas/riscv/h-ext-64.s: Likewise. include/ * opcode/riscv-opc.h: Added encodings for hypervisor csrs and instrcutions. opcodes/ * riscv-opc.c (riscv_opcodes): Added hypervisor instrcutions. 2021-12-24 Vineet Gupta RISC-V: Hypervisor ext: drop Privileged Spec 1.9.1 implementation/tests This makes way for a clean 1.12 based Hypervisor Ext support. There are no known implementors of 1.9.1 H-ext. (Per Jim, kendryte k210 is based on priv spec 1.9.1, but it seems unlikely that they implemented H-ext). Reviewed-by: Palmer Dabbelt Reviewed-by: Nelson Chu gas/ * testsuite/gas/riscv/csr-dw-regnums.d: Drop the hypervisor csrs defined in the privileged spec 1.9.1. * testsuite/gas/riscv/csr-dw-regnums.s: Likewise. * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Likewise. * testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise. * testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise. * testsuite/gas/riscv/priv-reg-version-1p10.d: Likewise. * testsuite/gas/riscv/priv-reg-version-1p11.d: Likewise. * testsuite/gas/riscv/priv-reg-version-1p9p1.d: Likewise. * testsuite/gas/riscv/priv-reg.s: Likewise. include/ * opcode/riscv-opc.h: Drop the hypervisor csrs defined in the privileged spec 1.9.1. 2021-12-24 GDB Administrator Automatic date update in version.in 2021-12-23 Andrew Burgess gdb/testsuite: resolve some duplicate testnames in gdb.mi Set of fixes to resolve some duplicate test names in the gdb.mi/ directory. There should be no real test changes after this set of fixes, they are all either: - Adding with_test_prefix type constructs to make test names unique, or - Changing the test name to be more descriptive, or better reflect the test being run. 2021-12-23 Andrew Burgess gdb/remote: handle attach when stop packet lacks thread-id Bug PR gdb/28405 reports a regression when using attach with an extended-remote target. In this case the target is not including a thread-id in the stop packet it sends back after the attach. The regression was introduced with this commit: commit 8f66807b98f7634c43149ea62e454ea8f877691d Date: Wed Jan 13 20:26:58 2021 -0500 gdb: better handling of 'S' packets The problem is that when GDB processes the stop packet, it sees that there is no thread-id and so has to "guess" which thread the stop should apply to. In this case the target only has one thread, so really, there's no guessing needed, but GDB still runs through the same process, this shouldn't cause us any problems. However, after the above commit, GDB now expects itself to be more internally consistent, specifically, only a thread that GDB thinks is resumed, can be a candidate for having stopped. It turns out that, when GDB attaches to a process through an extended-remote target, the threads of the process being attached too, are not, initially, marked as resumed. And so, when GDB tries to figure out which thread the stop might apply too, it finds no threads in the processes marked resumed, and so an assert triggers. In extended_remote_target::attach we create a new thread with a call to add_thread_silent, rather than remote_target::remote_add_thread, the reason is that calling the latter will result in a call to 'add_thread' rather than 'add_thread_silent'. However, remote_target::remote_add_thread includes additional actions (i.e. calling remote_thread_info::set_resumed and set_running) which are missing from extended_remote_target::attach. These missing calls are what would serve to mark the new thread as resumed. In this commit I propose that we add an extra parameter to remote_target::remote_add_thread. This new parameter will force the new thread to be added with a call to add_thread_silent. We can now call remote_add_thread from the ::attach method, the extra actions (listed above) will now be performed, and the thread will be left in the correct state. Additionally, in PR gdb/28405, a segfault is reported. This segfault triggers when 'set debug remote 1' is used before trying to reproduce the original assertion failure. The cause of this is in remote_target::select_thread_for_ambiguous_stop_reply, where we do this: remote_debug_printf ("first resumed thread is %s", pid_to_str (first_resumed_thread->ptid).c_str ()); remote_debug_printf ("is this guess ambiguous? = %d", ambiguous); gdb_assert (first_resumed_thread != nullptr); Notice that when debug printing is on we dereference first_resumed_thread before we assert that the pointer is not nullptr. This is the cause of the segfault, and is resolved by moving the assert before the debug printing code. I've extended an existing test, ext-attach.exp, so that the original test is run multiple times; we run in the original mode, as normal, but also, we now run with different packets disabled in gdbserver. In particular, disabling Tthread would trigger the assertion as it was reported in the original bug. I also run the test in all-stop and non-stop modes now for extra coverage, we also run the tests with target-async enabled, and disabled. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28405 2021-12-23 Andrew Burgess gdb: on x86-64 non-trivial C++ objects are returned in memory Fixes PR gdb/28681. It was observed that after using the `finish` command an incorrect value was displayed in some cases. Specifically, this behaviour was observed on an x86-64 target. Consider this test program: struct A { int i; A () { this->i = 0; } A (const A& a) { this->i = a.i; } }; A func (int i) { A a; a.i = i; return a; } int main () { A a = func (3); return a.i; } And this GDB session: $ gdb -q ex.x Reading symbols from ex.x... (gdb) b func Breakpoint 1 at 0x401115: file ex.cc, line 14. (gdb) r Starting program: /home/andrew/tmp/ex.x Breakpoint 1, func (i=3) at ex.cc:14 14 A a; (gdb) finish Run till exit from #0 func (i=3) at ex.cc:14 main () at ex.cc:23 23 return a.i; Value returned is $1 = { i = -19044 } (gdb) p a $2 = { i = 3 } (gdb) Notice how after the `finish` the contents of $1 are junk, but, when I immediately ask for the value of `a`, I get back the correct value. The problem here is that after the finish command GDB calls the function amd64_return_value to figure out where the return value can be found (on x86-64 targets anyway). This function makes the wrong choice for the struct A in our case, as sizeof(A) <= 8, then amd64_return_value decides that A will be returned in a register. GDB then reads the return value register an interprets the contents as an instance of A. Unfortunately, A is not trivially copyable (due to its copy constructor), and the sys-v specification for argument and return value passing, says that any non-trivial C++ object should have space allocated for it by the caller, and the address of this space is passed to the callee as a hidden first argument. The callee should then return the address of this space as the return value. And so, the register that GDB is treating as containing an instance of A, actually contains the address of an instance of A (in this case on the stack), this is why GDB shows the incorrect result. The call stack within GDB for where we actually go wrong is this: amd64_return_value amd64_classify amd64_classify_aggregate And it is in amd64_classify_aggregate that we should be classifying the type as AMD64_MEMORY, instead of as AMD64_INTEGER as we currently do (via a call to amd64_classify_aggregate_field). At the top of amd64_classify_aggregate we already have this logic: if (TYPE_LENGTH (type) > 16 || amd64_has_unaligned_fields (type)) { theclass[0] = theclass[1] = AMD64_MEMORY; return; } Which handles some easy cases where we know a struct will be placed into memory, that is (a) the struct is more than 16-bytes in size, or (b) the struct has any unaligned fields. All we need then, is to add a check here to see if the struct is trivially copyable. If it is not then we know the struct will be passed in memory. I originally structured the code like this: if (TYPE_LENGTH (type) > 16 || amd64_has_unaligned_fields (type) || !language_pass_by_reference (type).trivially_copyable) { theclass[0] = theclass[1] = AMD64_MEMORY; return; } This solved the example from the bug, and my small example above. So then I started adding some more extensive tests to the GDB testsuite, and I ran into a problem. I hit this error: gdbtypes.h:676: internal-error: loc_bitpos: Assertion `m_loc_kind == FIELD_LOC_KIND_BITPOS' failed. This problem is triggered from: amd64_classify_aggregate amd64_has_unaligned_fields field::loc_bitpos Inside the unaligned field check we try to get the bit position of each field. Unfortunately, in some cases the field location is not FIELD_LOC_KIND_BITPOS, but is FIELD_LOC_KIND_DWARF_BLOCK. An example that shows this bug is: struct B { short j; }; struct A : virtual public B { short i; A () { this->i = 0; } A (const A& a) { this->i = a.i; } }; A func (int i) { A a; a.i = i; return a; } int main () { A a = func (3); return a.i; } It is the virtual base class, B, that causes the problem. The base class is represented, within GDB, as a field within A. However, the location type for this field is a DWARF_BLOCK. I spent a little time trying to figure out how to convert the DWARF_BLOCK to a BITPOS, however, I realised that, in this case at least, conversion is not needed. The C++ standard says that a class is not trivially copyable if it has any virtual base classes. And so, in this case, even if I could figure out the BITPOS for the virtual base class fields, I know for sure that I would immediately fail the trivially_copyable check. So, lets just reorder the checks in amd64_classify_aggregate to: if (TYPE_LENGTH (type) > 16 || !language_pass_by_reference (type).trivially_copyable || amd64_has_unaligned_fields (type)) { theclass[0] = theclass[1] = AMD64_MEMORY; return; } Now, if we have a class with virtual bases we will fail quicker, and avoid the unaligned fields check completely. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28681 2021-12-23 Andrew Burgess gdb: make use of SCOPE_EXIT to manage thread executing state While working on another patch relating to how GDB manages threads executing and resumed state, I spotted the following code in record-btrace.c: executing = tp->executing (); set_executing (proc_target, inferior_ptid, false); id = null_frame_id; try { id = get_frame_id (get_current_frame ()); } catch (const gdb_exception &except) { /* Restore the previous execution state. */ set_executing (proc_target, inferior_ptid, executing); throw; } /* Restore the previous execution state. */ set_executing (proc_target, inferior_ptid, executing); return id; I notice that we only catch the exception so we can call set_executing, and this is the same call to set_executing that we need to perform in the non-exception return path. This would be much cleaner if we could use SCOPE_EXIT to avoid the try/catch, so lets do that. While cleaning this up, I also applied a similar patch to record-full.c, though there's no try/catch in that case, but using SCOPE_EXIT makes the code safe if, in the future, we do start throwing exceptions. There should be no user visible changes after this commit. 2021-12-23 GDB Administrator Automatic date update in version.in 2021-12-22 Andrew Burgess gdb/doc: add some index entries relating to mi-async setting I noticed that the mi-async setting was not referenced from the index in any way, this commit tries to rectify that a bit. The @cindex lines I think are not controversial, these same index entries are used elsewhere in the manual for async related topics (see @node Background Execution). The only bit that might be controversial is that I've added a @kindex entry for 'set mi-async' when the command is documented as '-gdb-set mi-async' (with a similar difference for the show/-gdb-show). My reasoning here is that nothing else is indexed under -gdb-set or -gdb-show, and as -gdb-set/-gdb-show are just the MI equivalent for set/show anything that is documented under set/show can be adjusted using -gdb-set/-gdbshow, and so, I've tried to keep the index consistent for mi-async. 2021-12-22 Andrew Burgess gdb: convert 'set debug lin-lwp' to a boolean command Convert the 'set debug lin-lwp' command to a boolean. Adds a new LINUX_NAT_SCOPED_DEBUG_ENTER_EXIT macro, and makes use of it in one place (linux_nat_target::stop). The manual entry for 'set debug lin-lwp' is already vague about exactly what arguments this command takes, and the description talks about turning debug on and off, so I don't think there's any updates required there. I have updated the doc strings shown when the users enters 'help show debug lin-lwp' or 'help show debug lin-lwp'. The old title lines used to talk about the 'GNU/Linux lwp module', but this debug flag is now used for any native linux target debug, so we now talk about 'GNU/Linux native target'. The body string for this setting has been changed from 'Enables printf debugging output.' to 'When on, print debug messages relating to the GNU/Linux native target.', the old value looks like a cut&paste error to me. 2021-12-22 Andrew Burgess gdb: add threads debugging switch Add new commands: set debug threads on|off show debug threads Prints additional debug information relating to thread creation and deletion. GDB already announces when threads are created of course.... most of the time, but sometimes threads are added silently, in which case this debug message is the only mechanism to see the thread being added. Also, though GDB does announce when a thread exits, it doesn't announce when the thread object is deleted, I've added a debug message for that. Additionally, having message printed through the debug system will cause the messages to be nested to an appropriate depth when other debug sub-systems are turned on (especially things like `infrun` and `lin-lwp`). 2021-12-22 jiawei RISC-V: Update Scalar Crypto testcases. Add opcodes in testcases to make sure every instruction generate right opcode after disassemble. gas/ChangeLog: * testsuite/gas/riscv/k-ext-64.d: Add opcode detect. * testsuite/gas/riscv/k-ext.d: Ditto. * testsuite/gas/riscv/zbkb-32.d: Ditto. * testsuite/gas/riscv/zbkb-64.d: Ditto. * testsuite/gas/riscv/zbkc-32.d: Ditto. * testsuite/gas/riscv/zbkc-64.d: Ditto. * testsuite/gas/riscv/zbkx-32.d: Ditto. * testsuite/gas/riscv/zbkx-64.d: Ditto. * testsuite/gas/riscv/zknd-32.d: Ditto. * testsuite/gas/riscv/zknd-64.d: Ditto. * testsuite/gas/riscv/zkne-32.d: Ditto. * testsuite/gas/riscv/zkne-64.d: Ditto. * testsuite/gas/riscv/zknh-32.d: Ditto. * testsuite/gas/riscv/zknh-64.d: Ditto. * testsuite/gas/riscv/zksed-32.d: Ditto. * testsuite/gas/riscv/zksed-64.d: Ditto. * testsuite/gas/riscv/zksh-32.d: Ditto. * testsuite/gas/riscv/zksh-64.d: Ditto. 2021-12-22 Simon Marchi gdbarch-components.py: change empty "params" tuples to empty lists During review, it was suggested to change the "params" parameter from a tuple to a list, for esthetic reasons. The empty ones are still tuples though, they should probably be changed to be empty lists, for consistency. It does not change anything in the script result. Change-Id: If13c6c527aa167a5ee5b45740e5f1bda1e9517e4 2021-12-22 GDB Administrator Automatic date update in version.in 2021-12-21 Luis Machado [AArch64] Fix typo in error messages Fix mispelling of PROT_ME to PROT_MTE in the error messages. 2021-12-21 Joel Sherrill Obsolete m32c-rtems and m32r-rtems 2020-12-20 Joel Sherrill bfd/ * config.bfd (m32c-*-rtems*): Remove target. ld/ * configure.tgt (m32c-*-rtems*): Remove target. * configure.tgt (m32r-*-rtems*): Remove target. 2021-12-21 Jan Beulich x86: -mfence-as-lock-add=yes doesn't work for 16-bit mode Rather than trying to fix this (which would require making an assumption on the upper half of %esp being zero), simply issue an error. While at it, since the generated code is in conflict with -momit-lock-prefix=yes, issue an error in that case as well. gas/ELF: avoid below-base ref in obj_elf_parse_section_letters() We would better be prepared for 'm' being the first character of the incoming string. 2021-12-21 Alan Modra Typo fixes in binutils doc * doc/binutils.texi: Fix typos. 2021-12-21 GDB Administrator Automatic date update in version.in 2021-12-20 Tom Tromey Remove print_spaces This removes the print_spaces helper function, in favor of using the "*%s" idiom that's already used in many places in gdb. One spot (in symmisc.c) is changed to use print_spaces_filtered, because the rest of that function is using filtered output. (This highlights one way that the printf idiom is better -- this error is harder to make when using that.) Regression tested on x86-64 Fedora 34. 2021-12-20 Tom Tromey Remove puts_debug I noticed that puts_debug isn't used in the tree. git log tells me that the last use was removed in 2015: commit 40e0b27177e747600d3ec186458fe0e482a1cf77 Author: Pedro Alves Date: Mon Aug 24 15:40:26 2015 +0100 Delete the remaining ROM monitor targets ... and this commit mentions that the code being removed here probably hadn't worked for 6 years prior to that. Based on this, I'm removing puts_debug. I don't think it's useful. Tested by rebuilding. 2021-12-20 Tom Tromey Make n_spaces return a const char * n_spaces keeps the spaces in a static buffer. If a caller overwrites these, it may give an incorrect result to a subsequent caller. So, make the return type const to help avoid this outcome. 2021-12-20 Enze Li Add Enze Li to gdb/MAINTAINERS 2021-12-20 Joel Brobecker gdb/ada-exp.y: Reformat comment to follow GDB's coding standards This commit reformats a comment in gdb/ada-exp.y to avoid the leading '*' at the beginning of each line of the comment. gdb/ada-lang.h: Reformat comment to follow coding standards This commit reformats a comment in gdb/ada-lang.h to avoid the leading '*' at the beginning of each line of the comment. 2021-12-20 GDB Administrator Automatic date update in version.in 2021-12-19 Alan Modra Obsolete m32c-rtems readelf: avoid a possible divide by zero * readelf.c (process_section_headers): Check SHT_RELR entsize. 2021-12-19 GDB Administrator Automatic date update in version.in 2021-12-18 Enze Li gdb: add "exit" command as an alias for "quit" This command adds the "exit" command as an alias for the "quit" command, as requested in PR gdb/28406. The documentation is also updated to mention this new command. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28406 2021-12-18 Andrew Burgess gdb: add assert in remote_target::wait relating to async being off While working on another patch I ended up in a situation where I had async mode disabled (with 'maint set target-async off'), but the async event token got marked anyway. In this situation GDB was continually calling into remote_target::wait, however, the async token would never become unmarked as the unmarking is guarded by target_is_async_p. We could just unconditionally unmark the token, but that would feel like just ignoring a bug, so, instead, lets assert that if !target_is_async_p, then the async token should not be marked. This assertion would have caught my earlier mistake. There should be no user visible changes with this commit. 2021-12-18 Andrew Burgess gdb/remote: some fixes for 'maint set target-async off' While working on another patch relating to remote targets, I wanted to test with 'maint set target-async off' in place. Unfortunately I ran into some problems. This commit is an attempt to fix one of the issues I hit. In my particular case I was actually running with: maint set target-async off maint set target-non-stop off that is, we're telling GDB to force the targets to operate in non-async mode, and in all-stop mode. Here's my GDB session showing the problem: (gdb) maintenance set target-async off (gdb) maintenance set target-non-stop off (gdb) target extended-remote :54321 Remote debugging using :54321 (gdb) attach 2365960 Attaching to process 2365960 No unwaited-for children left. (gdb) Notice the 'No unwaited-for children left.' error, this is the problem. There's no reason why GDB should not be able to attach to the process. The problem is this: 1. The user runs 'attach PID' and this sends GDB into attach_command in infcmd.c. From here we call the ::attach method on the attach target, which will be the extended_remote_target. 2. In extended_remote_target::attach, we attach to the remote target and get the first reply (which is a stop packet). We put off processing the stop packet until the end of ::attach. We setup the inferior and thread to represent the process we attached to, and download the target description. Finally, we process the initial stop packet. If '!target_is_non_stop_p ()' and '!target_can_async_p ()', which is the case for us given the maintenance commands we used, we cache the stop packet within the remote_state::buf for later processing. 3. Back in attach_command, if 'target_is_non_stop_p ()' then we request that the target stops. This will either process any cached stop replies, or request that the target stops, and process the stop replies. However, this code is not what we use due to non-stop mode being disabled. So, we skip to the next step which is to call validate_exec_file. 4. Calling validate_exec_file can cause packets to be sent to the remote target, and replies received, the first path I hit is the call to target_pid_to_exec_file, which calls remote_target::pid_to_exec_file, which can then try to read the executable from the remote. Sending an receiving packets will make use of the remote_state::buf object. 5. The attempt to attach continues, but the damage is already done... So, the problem is that, in step #2 we cache a stop reply in the remote_state::buf, and then in step #4 we reuse the remote_state::buf object, discarding any cached stop reply. As a result, the initial stop, which is sent when GDB first attaches to the target, is lost. This problem can clearly be seen, I feel, by looking at the remote_state::cached_wait_status flag. This flag tells GDB if there is a wait status cached in remote_state::buf. However, in remote_target::putpkt_binary and remote_target::getpkt_or_notif_sane_1 this flag is just set back to 0, doing this immediately discards any cached data. I don't know if this scheme ever made sense, looking at commit 2d717e4f8a54, where the cached_wait_status flag was added, it appears that there was nothing between where the stop was cached, and where the stop was consumed, so, I suspect, there never was a situation where we ended up in putpkt_binary or getpkt_or_notif_sane_1 and needed to clear to the flag, maybe the clearing was added "just in case". Whatever the history, I claim that this clearing this flag is no longer a good idea. So, my first step toward fixing this issue was to replace the two instances of 'rs->cached_wait_status = 0;' in ::putpkt_binary and ::getpkt_or_notif_sane_1 with 'gdb_assert (rs->cached_wait_status == 0);', this, at least would show me when GDB was doing something dangerous, and indeed, this assert is now hit in my test case above. I did play with using some kind of scoped restore to backup, and restore the remote_state::buf object in all the places within remote.c that I was hitting where the ::buf was being corrupted. The first problem with this is that, where the ::cached_wait_status flag is reset is _not_ where ::buf is corrupted. For the ::putpkt_binary case, by the time we get to the method the buffer has already been corrupted in many cases, so we end up needing to add the scoped save/restore within the callers, which means we need the save/restore in _lots_ of places. Plus, using this save/restore model feels like the wrong solution. I don't think that it's obvious that the buffer might be holding cached data, and I think it would be too easy for new corruptions of the buffer to be introduced, which could easily go unnoticed for a long time. So, I really wanted a solution that didn't require us to cache data in the ::buf object. Luckily, I think we already have such a solution in place, the remote_state::stop_reply_queue, it seems like this does exactly the same task, just in a slightly different way. With the ::stop_reply_queue, the stop packets are processed upon receipt and the stop_reply object is added to the queue. With the ::buf cache solution, the unprocessed stop reply is cached in the ::buf, and processed later. So, finally, in this commit, I propose to remove the remote_state::cached_wait_status flag and to stop using the ::buf to cache stop replies. Instead, stop replies will now always be stored in the ::stop_reply_queue. There are two places where we use the ::buf to hold a cached stop reply, the first is in the ::attach method, and the second is in remote_target::start_remote, however, the second of these cases is far less problematic, as after caching the stop reply in ::buf we call the global start_remote function, which does very little work before calling normal_stop, which processes the cached stop reply. However, my plan is to switch both users over to using ::stop_reply_queue so that the old (unsafe) ::cached_wait_status mechanism can be completely removed. The next problem is that the ::stop_reply_queue is currently only used for async-mode, and so, in remote_target::push_stop_reply, where we push stop_reply objects into the ::stop_reply_queue, we currently also mark the async event token. I've modified this so we only mark the async event token if 'target_is_async_p ()' - note, _is_, not _can_ here. The ::push_stop_reply method is called in places where async mode has been temporarily disabled, but, when async mode is switched back on (see remote_target::async) we will mark the event token if there are events in the queue. Another change of interest is in remote_target::remote_interrupt_as. Previously this code checked ::cached_wait_status, but didn't check for events in the ::stop_reply_queue. Now that ::cached_wait_status has been removed we now check the queue length instead, which should have the same result. Finally, in remote_target::wait_as, I've tried to merge the processing of the ::stop_reply_queue with how we used to handle the ::cached_wait_status flag. Currently, when processing the ::stop_reply_queue we call process_stop_reply and immediately return. However, when handling ::cached_wait_status we run through the whole of ::wait_as, and return at the end of the function. If we consider a standard stop packet, the two differences I see are: 1. Resetting of the remote_state::waiting_for_stop_reply, flag; this is not currently done when processing a stop from the ::stop_reply_queue. 2. The final return value has the possibility of being adjusted at the end of ::wait_as, as well as there being calls to record_currthread, non of which are done if we process a stop from the ::stop_reply_queue. After discussion on the mailing list: https://sourceware.org/pipermail/gdb-patches/2021-December/184535.html it was suggested that, when an event is pushed into the ::stop_reply_queue, the ::waiting_for_stop_reply flag is never going to be set. As a result, we don't need to worry about the first difference. I have however, added a gdb_assert to validate the assumption that the flag is never going to be set. If in future the situation ever changes, then we should find out pretty quickly. As for the second difference, I have resolved this by having all stop packets taken from the ::stop_reply_queue, pass through the return value adjustment code at the end of ::wait_as. An example of a test that reveals the benefits of this commit is: make check-gdb \ RUNTESTFLAGS="--target_board=native-extended-gdbserver \ GDBFLAGS='-ex maint\ set\ target-async\ off \ -ex maint\ set\ target-non-stop\ off' \ gdb.base/attach.exp" For testing I've been running test on x86-64/GNU Linux, and run with target boards unix, native-gdbserver, and native-extended-gdbserver. For each board I've run with the default GDBFLAGS, as well as with: GDBFLAGS='-ex maint\ set\ target-async\ off \ -ex maint\ set\ target-non-stop\ off' \ Though running with the above GDBFLAGS is clearly a lot more unstable both before and after my patch, I'm not seeing any consistent new failures with my patch, except, with the native-extended-gdbserver board, where I am seeing new failures, but only because more tests are now running. For that configuration alone I see the number of unresolved go down by 49, the number of passes goes up by 446, and the number of failures also increases by 144. All of the failures are new tests as far as I can tell. 2021-12-18 Vladimir Mezentsev x86: Terminate mnemonicendp in swap_operand() Tested on x86_64-pc-linux-gnu. opcodes/ChangeLog: 2021-12-17 Vladimir Mezentsev * i386-dis.c (swap_operand): Terminate mnemonicendp. gas/ChangeLog: 2021-12-17 Vladimir Mezentsev * testsuite/gas/i386/opts-intel.d: Updated expected disassembly. * testsuite/gas/i386/opts.d: Likewise. * testsuite/gas/i386/sse2avx-opts-intel.d: Likewise. * testsuite/gas/i386/sse2avx-opts.d: Likewise. * testsuite/gas/i386/x86-64-opts-intel.d: Likewise. * testsuite/gas/i386/x86-64-opts.d: Likewise. * testsuite/gas/i386/x86-64-sse2avx-opts-intel.d: Likewise. * testsuite/gas/i386/x86-64-sse2avx-opts.d: Likewise. 2021-12-18 GDB Administrator Automatic date update in version.in 2021-12-17 Tom Tromey Document gdbarch-components.py This adds a comment to document how to update gdbarch. Remove gdbarch.sh This patch runs gdbarch.py and removes gdbarch.sh. 2021-12-17 Simon Marchi Add new gdbarch generator The new gdbarch generator is a Python program. It reads the "components.py" that was created in the previous patch, and generates gdbarch.c and gdbarch-gen.h. This is a relatively straightforward translation of the existing .sh code. It doesn't try very hard to be idiomatic Python or to be especially smart. It is, however, incredibly faster: $ time ./gdbarch.sh real 0m8.197s user 0m5.779s sys 0m3.384s $ time ./gdbarch.py real 0m0.065s user 0m0.053s sys 0m0.011s Co-Authored-By: Tom Tromey 2021-12-17 Tom Tromey Generate new gdbarch-components.py from gdbarch.sh The new gdbarch.sh approach will be to edit a Python file, rather than adding a line to a certain part of gdbarch.sh. We use the existing sh code, though, to generate the first draft of this .py file. Documentation on the format will come in a subsequent patch. Note that some info (like "staticdefault") in the current code is actually unused, and so is ignored by this new generator. 2021-12-17 Tom Tromey Do not sort the fields in gdbarch_dump This changes gdbarch.sh so that it no longer sorts the fields in gdbarch_dump. This sorting isn't done anywhere else by gdbarch.sh, and this simplifies the new generator a little bit. Do not generate gdbarch.h Now that gdbarch.h has been split, we no longer need the generator code in gdbarch.sh, so remove it. 2021-12-17 Tom Tromey Split gdbarch.h into two files This patch splits gdbarch.h into two files -- gdbarch.h now is editable and hand-maintained, and the new gdbarch-gen.h file is the only thing generated by gdbarch.sh. This lets us avoid maintaining boilerplate in the gdbarch.sh file. Note that gdbarch.sh still generates gdbarch.h after this patch. This makes it easier to re-run when rebasing. This code is removed in a subsequent patch. 2021-12-17 Tom Tromey Move ordinary gdbarch code to arch-utils While I think it makes sense to generate gdbarch.c, at the same time I think it is better for ordinary code to be editable in a C file -- not as a hunk of C code embedded in the generator. This patch moves this sort of code out of gdbarch.sh and gdbarch.c and into arch-utils.c, then has arch-utils.c include gdbarch.c. 2021-12-17 Maciej W. Rozycki Avoid redundant operations in `fortran_array_walker' Move inner dimension's element type determination outside the respective loops in `fortran_array_walker'. The operation is exactly the same with each iteration, so there is no point in redoing it for each element and while a smart compiler might be able to move it outside the loop it is regardless a bad coding style. No functional change. Initialize `m_ndimensions' in the member initializer list Following our coding convention initialize the `m_ndimensions' member in the member initializer list rather than in the body of the constructor of the `fortran_array_walker' class. No functional change. 2021-12-17 Lancelot SIX Pedro Alves gdb/tui: install SIGWINCH only when connected to a TTY PR26056 reports that when GDB is connected to non-TTY stdin/stdout, it crashes when it receives a SIGWINCH signal. This can be reproduced as follows: $ gdb/gdb -nx -batch -ex 'run' --args sleep 60 &1 | cat # from another terminal: $ kill -WINCH %(pidof gdb) When doing so, the process crashes in a call to rl_resize_terminal: void rl_resize_terminal (void) { _rl_get_screen_size (fileno (rl_instream), 1); ... } The problem is that at this point rl_instream has the value NULL. The rl_instream variable is supposed to be initialized during a call to readline_initialize_everything, which in a normal startup sequence is called under this call chain: tui_interp::init tui_ensure_readline_initialized rl_initialize readline_initialize_everything In tui_interp::init, we have the following sequence: tui_initialize_io (); tui_initialize_win (); // <- Installs SIGWINCH if (gdb_stdout->isatty ()) tui_ensure_readline_initialized (); // <- Initializes rl_instream This function unconditionally installs the SIGWINCH signal handler (this is done by tui_initialize_win), and then if gdb_stdout is a TTY it initializes readline. Therefore, if stdout is not a TTY, SIGWINCH is installed but readline is not initialized. In such situation rl_instream stays NULL, and when GDB receives a SIGWINCH it calls its handler and in fine tries to access rl_instream leading to the crash. This patch proposes to fix this issue by installing the SIGWINCH signal handler only if GDB is connected to a TTY. Given that this initialization it the only task of tui_initialize_win, this patch moves tui_initialize_win just after the call to tui_ensure_readline_initialized. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26056 Change-Id: I6458acef7b0d9beda2a10715d0345f02361076d9 2021-12-17 Alan Modra asan: NULL dereference in bfd_elf_set_group_contents * elf-bfd.h (struct output_elf_obj_tdata): Make num_section_syms unsigned. * elf.c (bfd_elf_set_group_contents): Bounds check sec->index and check that entry in elf_section_syms for sec is non-NULL. (_bfd_elf_symbol_from_bfd_symbol): Adjust. 2021-12-17 Alan Modra asan: use after free in _bfd_elf_mips_get_relocated_section_contents Leaving entries on mips_hi16_list from a previous pass over relocs leads to confusing bugs. * elfxx-mips.c (_bfd_elf_mips_get_relocated_section_contents): Free mips_hi16_list entries on error exit. 2021-12-17 Alan Modra asan: abort in wasm_scan_name_function_section Macros like READ_LEB128 in wasm-module.c that alter control flow are evil. Maintainers will break your code if you have hidden ways to reach labels. * wasm-module.c (wasm_scan_name_function_section): Don't attempt to bfd_release NULL. 2021-12-17 Alan Modra asan: heap-buffer-overflow in bpf_elf_generic_reloc The bpf reloc howtos are a bit weird, using bitpos to specify an offset from r_offset that is outside the size of the reloc as given by howto.size. That means bfd_get_reloc_size gives the wrong answer for range checking, and thus bfd_reloc_offset_in_range can't be used. * elf64-bpf.c (bpf_elf_generic_reloc): Handle bitpos offset reloc range checking. 2021-12-17 Alan Modra ubsan: bfd.c:2519:8: shift exponent 34 is too large * bfd.c (bfd_update_compression_header): Avoid integer overflow. asan: buffer overflow in mmo_get_symbols * mmo.c (mmo_get_symbols): Error on symbol name exceeding max length. 2021-12-17 Alan Modra asan: buffer overflow in elfnn-aarch64.c get_plt_type We can't assume .dynamic is a multiple of ElfNN_External_Dyn, at least not when presented with fuzzed object files. * elfnn-aarch64.c (get_plt_type): Don't access past end of improperly sized .dynamic. 2021-12-17 Alan Modra try_build_id_prefix gcc-10 -Wformat-security errors dwarf.c:11300:3: error: format not a string literal and no format arguments [-Werror=format-security] 11300 | f += sprintf (f, prefix); PR 28697 * dwarf.c (try_build_id_prefix): Avoid -Wformat-security error. 2021-12-17 GDB Administrator Automatic date update in version.in 2021-12-16 Nick Clifton Fix AVR assembler so that it creates relocs that will work with linker relaxation. PR 28686 gas * config/tc-avr.h (tc_fix_adjustable): Define. * config/tc-avr.c (avr_fix_adjustable): New function. * testsuite/gas/all/gas.exp: Skip tests that need adjustable fixups. * testsuite/gas/elf/elf.exp: Likewise. * testsuite/gas/avr/diffreloc_withrelax.d: Adjust expected output. * testsuite/gas/avr/pc-relative-reloc.d: Adjust expected output. ld * testsuite/ld-avr/avr-prop-7.d: Adjust expected output. * testsuite/ld-avr/avr-prop-8.d: Likewise. * testsuite/ld-avr/pr13402.d: Likewise. 2021-12-16 Nick Clifton When loading separate debug info files, also attempt to locate a file based upon the build-id. PR 28697 * dwarf.c (load_build_id_debug_file): New function. (try_build_id_prefix): New function. (check_for_and_load_links): Call load_build_id_debug_file. (debug_displays): Add entry for .note.gnu.build-id. * dwarf.h (enum dwarf_section_display_enum): Add note_gnu_build_id. * testsuite/binutils-all/debuginfod.exp (test_fetch_debuglink): Fix regexp for loads via debuglink section. 2021-12-16 Richard Sandiford arm: Add support for Armv9.1-A to Armv9.3-A This patch adds AArch32 support for -march=armv9.[123]-a. The behaviour of the new options can be expressed using a combination of existing feature flags and tables. The cpu_arch_ver entries for ARM_ARCH_V9_2A and ARM_ARCH_V9_3A are technically redundant but it seemed less surprising to include them anyway. include/ * opcode/arm.h (ARM_ARCH_V9_1A, ARM_ARCH_V9_2A): New macros. (ARM_ARCH_V9_3A): Likewise. gas/ * doc/c-arm.texi: Add armv9.1-a, armv9.2-a and armv9.3-a. * config/tc-arm.c (armv91a_ext_table, armv92a_ext_table): New macros. (armv93a_ext_table): Likewise. (arm_archs): Add armv9.1-a, armv9.2-a and armv9.3-a. (cpu_arch_ver): Add ARM_ARCH_V9_1A, ARM_ARCH_V9_2A and ARM_ARCH_V9_3A. * NEWS: Mention the above. * testsuite/gas/arm/attr-march-armv9_1-a.d: New test. * testsuite/gas/arm/attr-march-armv9_2-a.d: Likewise. * testsuite/gas/arm/attr-march-armv9_3-a.d: Likewise. * testsuite/gas/arm/bfloat16-armv9.1-a.d: Likewise. * testsuite/gas/arm/bfloat16-armv9.2-a.d: Likewise. * testsuite/gas/arm/bfloat16-armv9.3-a.d: Likewise. * testsuite/gas/arm/i8mm-armv9.1-a.d: Likewise. * testsuite/gas/arm/i8mm-armv9.2-a.d: Likewise. * testsuite/gas/arm/i8mm-armv9.3-a.d: Likewise. 2021-12-16 Richard Sandiford arm: Add support for Armv8.7-A and Armv8.8-A This patch adds AArch32 support for -march=armv8.[78]-a. The behaviour of the new options can be expressed using a combination of existing feature flags and tables. The cpu_arch_ver entries are technically redundant but it seemed less surprising to include them anyway. include/ * opcode/arm.h (ARM_ARCH_V8_7A, ARM_ARCH_V8_8A): New macros. gas/ * doc/c-arm.texi: Add armv8.7-a and armv8.8-a. * config/tc-arm.c (armv87a_ext_table, armv88a_ext_table): New macros. (arm_archs): Add armv8.7-a and armv8.8-a. (cpu_arch_ver): Add ARM_ARCH_V8_7A and ARM_ARCH_V8_8A. * NEWS: Mention the above. * testsuite/gas/arm/attr-march-armv8_7-a.d: New test. * testsuite/gas/arm/attr-march-armv8_8-a.d: Likewise. * testsuite/gas/arm/bfloat16-armv8.7-a.d: Likewise. * testsuite/gas/arm/bfloat16-armv8.8-a.d: Likewise. * testsuite/gas/arm/i8mm-armv8.7-a.d: Likewise. * testsuite/gas/arm/i8mm-armv8.8-a.d: Likewise. 2021-12-16 Richard Sandiford aarch64: Add support for Armv9.1-A to Armv9.3-A This patch adds AArch64 support for -march=armv9.[123]-a. The behaviour of the new options can be expressed using a combination of existing feature flags, so we don't need to eat into the vanishing number of spare AARCH64_FEATURE_* bits. Hoewver, it was more convenient to separate out the |s of feature flags so that Armv9.1-A could reuse the set for Armv8.6-A, and so on. include/ * opcode/aarch64.h (AARCH64_ARCH_V8_FEATURES): New macro, split out from... (AARCH64_ARCH_V8): ...here. (AARCH64_ARCH_V8_1_FEATURES): New macro, split out from... (AARCH64_ARCH_V8_1): ...here. (AARCH64_ARCH_V8_2_FEATURES): New macro, split out from... (AARCH64_ARCH_V8_2): ...here. (AARCH64_ARCH_V8_3_FEATURES): New macro, split out from... (AARCH64_ARCH_V8_3): ...here. (AARCH64_ARCH_V8_4_FEATURES): New macro, split out from... (AARCH64_ARCH_V8_4): ...here. (AARCH64_ARCH_V8_5_FEATURES): New macro, split out from... (AARCH64_ARCH_V8_5): ...here. (AARCH64_ARCH_V8_6_FEATURES): New macro, split out from... (AARCH64_ARCH_V8_6): ...here. (AARCH64_ARCH_V8_7_FEATURES): New macro, split out from... (AARCH64_ARCH_V8_7): ...here. (AARCH64_ARCH_V8_8_FEATURES): New macro, split out from... (AARCH64_ARCH_V8_8): ...here. (AARCH64_ARCH_V9_FEATURES): New macro, split out from... (AARCH64_ARCH_V9): ...here. (AARCH64_ARCH_V9_1_FEATURES, AARCH64_ARCH_V9_1): New macros. (AARCH64_ARCH_V9_2_FEATURES, AARCH64_ARCH_V9_2): New macros. (AARCH64_ARCH_V9_3_FEATURES, AARCH64_ARCH_V9_3): New macros. gas/ * doc/c-aarch64.texi: Add armv9.1-a, armv9-2-a and armv9.3-a. * config/tc-aarch64.c (aarch64_archs): Likewise. * NEWS: Mention the above. * testsuite/gas/aarch64/armv9_invalid.d, testsuite/gas/aarch64/armv9_invalid.s, testsuite/gas/aarch64/armv9_invalid.l: New test. * testsuite/gas/aarch64/armv9_1.d, testsuite/gas/aarch64/armv9_1.s: Likewise. * testsuite/gas/aarch64/armv9_1_invalid.d, testsuite/gas/aarch64/armv9_1_invalid.s, testsuite/gas/aarch64/armv9_1_invalid.l: Likewise. * testsuite/gas/aarch64/armv9_2.d, testsuite/gas/aarch64/armv9_2.s: Likewise. * testsuite/gas/aarch64/armv9_2_invalid.d, testsuite/gas/aarch64/armv9_2_invalid.s, testsuite/gas/aarch64/armv9_2_invalid.l: Likewise. * testsuite/gas/aarch64/armv9_3.d, testsuite/gas/aarch64/armv9_3.s: Likewise. 2021-12-16 Nelson Chu RISC-V: Support svinval extension with frozen version 1.0. According to the privileged spec, there are five new instructions for svinval extension. Two of them (HINVAL.VVMA and HINVAL.GVMA) need to enable the hypervisor extension. But there is no implementation of hypervisor extension in mainline for now, so let's consider the related issues later. 31..25 24..20 19..15 14..12 11...7 6..2 1..0 sinval.vma 0001011 rs2 rs1 000 00000 11100 11 sfence.w.inval 0001100 00000 00000 000 00000 11100 11 sfence.inval.ir 0001100 00001 00000 000 00000 11100 11 hinval.vvma 0010011 rs2 rs1 000 00000 11100 11 hinval.gvma 0110011 rs2 rs1 000 00000 11100 11 This patch is cherry-picked from the riscv integration branch since the svinval extension is frozen for now. Besides, we fix the funct7 encodings of hinval.vvma and hinval.gvma, from 0x0011011 and 0x0111011 to 0x0010011 and 0x0110011. bfd/ * elfxx-riscv.c (riscv_supported_std_s_ext): Added svinval. (riscv_multi_subset_supports): Handle INSN_CLASS_SVINVAL. gas/ * testsuite/gas/riscv/svinval.d: New testcase. * testsuite/gas/riscv/svinval.s: Likewise. include/ * opcode/riscv-opc.h: Added encodings for svinval. * opcode/riscv.h (enum riscv_insn_class): Added INSN_CLASS_SVINVAL. opcodes/ * riscv-opc.c (riscv_opcodes): Added svinval instructions. 2021-12-16 Mike Frysinger sim: mips/or1k: drop redundant arg to bitsize macro These are just using the default behavior for the 3rd arg, so drop it to make it more clear. This also makes them match all other ports that only use the first 2 arguments. 2021-12-16 Mike Frysinger bfd: unify texi generation rules The logic between these rules are extremely similar, so unify them into a single variable by leveraging make $@ and $< variables. Also add automake silent rule support while we're here. 2021-12-16 Mike Frysinger sim: fix mingw builds with replacement gnulib open The header shuffling in here broke the workaround for gnulib defining "open". Move it back before the sim-specific includes to fix. This is because the callback struct in the headers has an "open" member and this file tries to call that. 2021-12-16 Sandra Loosemore Adjust compare_link_order for unstable qsort In a cross toolchain for nios2-elf target and x86_64-w64-mingw32 host using binutils 2.37, we observed a failure that didn't show up on x86_64-linux-gnu host: testcase pr25490-5.s was failing with C:\path\to\nios2-elf-ld.exe: looping in map_segments FAIL: __patchable_function_entries section 5 * ldelfgen.c (compare_link_order): Don't use section id in sorting. Keep original ordering instead. Update comments. 2021-12-16 Alan Modra Re: Fix an undefined behaviour in the BFD library's DWARF parser Using an unsigned int cast (to 32 bits) on a pointer difference (of possibly 64 bits) is wrong. Even though it will work on all real object files, the fuzzers will eventually find this hole. PR 28687 * dwarf1.c (parse_die): Cast pointer difference to size_t. Catch another possible pointer overflow. 2021-12-16 Simon Marchi gdb: re-format with black 21.12b0 Run black 21.12b0 on gdb/, there is a single whitespace change. I will update the wiki [1] in parallel to bump the version of black to 21.12b0. [1] https://sourceware.org/gdb/wiki/Internals%20GDB-Python-Coding-Standards Change-Id: Ib3b859e3506c74a4f15d16f1e44ef402de3b98e2 2021-12-16 Simon Marchi gdb: re-format with black 21.9b0 Run black 21.9b0 on gdb/ (this is the version currently mentioned on the wiki [1], the subsequent commit will bump that version). [1] https://sourceware.org/gdb/wiki/Internals%20GDB-Python-Coding-Standards Change-Id: I5ceaab42c42428e053e2572df172aa42a88f0f86 2021-12-16 GDB Administrator Automatic date update in version.in 2021-12-15 Alan Modra PR28691, validate dwarf attribute form PR28691 is a fuzzing PR that triggers a non-problem of "output changes per run" with PIEs and/or different compilers. I've closed similar PRs before as wontfix, but I guess there will be no end of this type of PR. The trigger is an attribute that usually takes one of the offset/constant reference DW_FORMs being given an indexed string DW_FORM. The bfd reader doesn't support indexed strings and returns an error string instead. The address of the string varies with PIE runs and/or compiler, and we allow that address to appear in output. Fix this by validating integer attribute forms, as we do for string form attributes. PR 28691 * dwarf2.c (is_str_attr): Rename to.. (is_str_form): ..this. Change param type. Update calls. (is_int_form): New function. (read_attribute_value): Handle DW_FORM_addrx2. (find_abstract_instance): Validate form when using attr.u.val. (scan_unit_for_symbols, parse_comp_unit): Likewise. 2021-12-15 Luis Machado New --enable-threading configure option to control use of threads in GDB/GDBserver Add the --enable-threading configure option so multithreading can be disabled at configure time. This is useful for statically-linked builds of GDB/GDBserver, since the thread library doesn't play well with that setup. If you try to run a statically-linked GDB built with threading, it will crash when setting up the number of worker threads. This new option is also convenient when debugging GDB in a system with lots of threads, where the thread discovery code in GDB will emit too many messages, like so: [New Thread 0xfffff74d3a50 (LWP 2625599)] If you have X threads, that message will be repeated X times. The default for --enable-threading is "yes". 2021-12-15 Nikita Popov Fix an undefined behaviour in the BFD library's DWARF parser. PR 28687 * dwarf1.c (parse_die): Fix undefined behaviour in range tests. 2021-12-15 Alan Modra PR28694, Out-of-bounds write in stab_xcoff_builtin_type PR 28694 * stabs.c (stab_xcoff_builtin_type): Make typenum unsigned. Negate typenum earlier, simplifying bounds checking. Correct off-by-one indexing. Adjust switch cases. 2021-12-15 GDB Administrator Automatic date update in version.in 2021-12-14 Alan Modra loongarch32 build failure on 32-bit host gas/config/tc-loongarch.c: In function ‘assember_macro_helper’: gas/config/tc-loongarch.c:915:28: error: right shift count >= width of type [-Werror=shift-count-overflow] 915 | hi32 = insn->args[1] >> 32; | ^~ One possible fix is to make offsetT a 64-bit type for loongarch32. This also makes bfd/targmatch.h (generated from bfd/config.bfd) consistent since the loongarch32 match is inside #ifdef BFD64. * config.bfd (loongarch32-*): Set want64. 2021-12-14 Alan Modra loongarch64 build failure on 32-bit host gas/config/tc-loongarch.c: In function ‘loongarch_args_parser_can_match_arg_helper’: gas/config/tc-loongarch.c:661:13: error: cast from pointer to integer of different size [-Werror=pointer -to-int-cast] 661 | imm = (offsetT) str_hash_find (r_htab, arg); | ^ Cast it to the correct size int, relying on normal integer promotions if offsetT is larger than a pointer. * config/tc-loongarch.c (loongarch_args_parser_can_match_arg_helper): Cast return from str_hash_find to intptr_t, not offsetT. 2021-12-14 Alan Modra XCOFF C_STSYM test failure on 32-bit host This test was failing here and on another similar symbol: [ 4](sec 1)(fl 0x00)(ty 0)(scl 143) (nx 0) 0x05d1745d11745d21 .bs where correct output is [ 4](sec 1)(fl 0x00)(ty 0)(scl 143) (nx 0) 0x000000000000000a .bs The problem is caused by a 32-bit host pointer being sign-extended when stored into a 64-bit bfd_vma, and then that value not being trimmed back to 32 bits when used. The following belt-and-braces patch fixes both the store and subsequent reads. * coffcode.h (coff_slurp_symbol_table): Do not sign extend when storing a host pointer to syment.n_value. * coffgen.c (coff_get_symbol_info): Cast syment.n_value to a bfd_hostptr_t before using in arithmetic. (coff_print_symbol): Likewise. 2021-12-14 Simon Marchi gdbserver/tracepoint.cc: use snprintf in gdb_agent_socket_init If we modify tracepoint.cc to try to use a too long unix socket name, for example by modifying SOCK_DIR to be: #define SOCK_DIR "/tmp/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut/salut" ... trying to start an application with libinproctrace.so loaded crashes: $ LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libasan.so.6:./libinproctrace.so /bin/ls /home/smarchi/src/binutils-gdb/gdbserver/../gdbsupport/common-utils.cc:69: A problem internal to GDBserver in-process agent has been detected. xsnprintf: Assertion `ret < size' failed. Looking at the rest of the socket initialization code, the intent seems to be that if something goes wrong, we warn but let the program execute. So crashing on this failed assertions seems against the intent. Commit 6cebaf6e1ae4 ("use xsnprintf instead of snprintf.") changed this code to use xsnprintf instead of snprintf, introducing this assertion. Before that, snprintf would return a value bigger that UNIX_PATH_MAX and the "if" after would catch it and emit a warning, which is exactly what we want. That change was done because LynxOS didn't have snprintf. Since LynxOS isn't supported anymore, we can simply revert to use snprintf there. With this patch, we get a warning (printed by the caller of gdb_agent_socket_init), but the program keeps executing: $ LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libasan.so.6:./libinproctrace.so /bin/ls ipa: could not create sync socket ... Change-Id: I78bca52d5dc3145335abeae45a42052701e3f5dd 2021-12-14 Simon Marchi gdbserver/tracepoint.cc: work around -Wstringop-truncation error When building gdb with on AArch64 with g++ 11.1.0 (and some preceding versions too), -O2 and -fsanitize=address, I get this error. CXX tracepoint-ipa.o cc1plus: warning: command-line option ‘-Wmissing-prototypes’ is valid for C/ObjC but not for C++ In file included from /usr/include/string.h:519, from ../gnulib/import/string.h:41, from /home/simark/src/binutils-gdb/gdbserver/../gdbsupport/common-defs.h:95, from /home/simark/src/binutils-gdb/gdbserver/server.h:22, from /home/simark/src/binutils-gdb/gdbserver/tracepoint.cc:19: In function ‘char* strncpy(char*, const char*, size_t)’, inlined from ‘int init_named_socket(const char*)’ at /home/simark/src/binutils-gdb/gdbserver/tracepoint.cc:6902:11, inlined from ‘int gdb_agent_socket_init()’ at /home/simark/src/binutils-gdb/gdbserver/tracepoint.cc:6953:26, inlined from ‘void* gdb_agent_helper_thread(void*)’ at /home/simark/src/binutils-gdb/gdbserver/tracepoint.cc:7204:41: /usr/include/bits/string_fortified.h:95:34: error: ‘char* __builtin_strncpy(char*, const char*, long unsigned int)’ output may be truncated copying 107 bytes from a string of length 107 [-Werror=stringop-truncation] 95 | return __builtin___strncpy_chk (__dest, __src, __len, | ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~ 96 | __glibc_objsize (__dest)); | ~~~~~~~~~~~~~~~~~~~~~~~~~ Note that _FORTIFY_SOURCE changes the message a bit, but I get a similar error if I use -D_FORTIFY_SOURCE=0. I am pretty sure it's spurious and might be related to this GCC bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88780 From what I can see, we are copying from a static 108 bytes long buffer (the global array agent_socket_name) to a 108 bytes long array, sockaddr_un::sun_path. I don't see anything wrong. Still, it would make things easier if we didn't see this error. Change the code to check that the source string length is smaller than the destination buffer (including space for the NULL byte) and use strcpy. For anybody who would like to try to reproduce, the full command line is: g++ -I. -I/home/simark/src/binutils-gdb/gdbserver -I/home/simark/src/binutils-gdb/gdbserver/../gdb/regformats -I/home/simark/src/binutils-gdb/gdbserver/.. -I/home/simark/src/binutils-gdb/gdbserver/../include -I/home/simark/src/binutils-gdb/gdbserver/../gdb -I/home/simark/src/binutils-gdb/gdbserver/../gnulib/import -I../gnulib/import -I/home/simark/src/binutils-gdb/gdbserver/.. -I.. -pthread -Wall -Wpointer-arith -Wno-unused -Wunused-value -Wunused-variable -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wunused-but-set-parameter -Wunused-but-set-variable -Wno-sign-compare -Wno-error=maybe-uninitialized -Wno-mismatched-tags -Wsuggest-override -Wimplicit-fallthrough=3 -Wduplicated-cond -Wshadow=local -Wdeprecated-copy -Wdeprecated-copy-dtor -Wredundant-move -Wmissing-declarations -Wmissing-prototypes -Wstrict-null-sentinel -Wformat -Wformat-nonliteral -Werror -DGDBSERVER -DCONFIG_UST_GDB_INTEGRATION -Drpl_strerror_r=strerror_r -Drpl_free=free -fPIC -DIN_PROCESS_AGENT -fvisibility=hidden -g3 -O2 -fsanitize=address -c -o tracepoint-ipa.o -MT tracepoint-ipa.o -MMD -MP -MF ./.deps/tracepoint-ipa.Tpo /home/simark/src/binutils-gdb/gdbserver/tracepoint.cc Change-Id: I18e86c0487feead7e7677e69398405e7057cf464 2021-12-14 Simon Marchi bfd: fix -Wunused errors with clang 13+ Clang 13 and 14 produce some -Wunused-but-set-{variable,parameter} for situations where gcc doesn't. In particular, when a variable is set and then used in a way to update its own value. For example, if `i` is only used in this way: int i = 2; i++; i = i + 1; gcc won't warn, but clang will. Fix all such errors found in an --enable-targets=all build. It would be important for somebody who knows what they're doing to just make sure that these variables can indeed be deleted, and that there a no cases where it's a bug, and the variable should actually be used. The first instance of this error fix by this patch is: CC elf32-score.lo /home/simark/src/binutils-gdb/bfd/elf32-score.c:450:11: error: variable 'relocation' set but not used [-Werror,-Wunused-but-set-variable] bfd_vma relocation; ^ Change-Id: I2f233ce20352645cf388aff3dfa08a651d21a6b6 2021-12-14 Andrew Burgess gdb/mi: rename build_table to add_builtin_mi_commands Just give the function build_table a more descriptive name. There should be no user visible changes after this commit. 2021-12-14 Jan Vrany gdb/mi: rename mi_cmd to mi_command Just give this class a new name, more inline with the name of the sub-classes. I've also updated mi_cmd_up to mi_command_up in mi-cmds.c inline with this new naming scheme. There should be no user visible changes after this commit. 2021-12-14 Jan Vrany gdb/mi: use separate classes for different types of MI command This commit changes the infrastructure in mi-cmds.{c,h} to add new sub-classes for the different types of MI command. Instances of these sub-classes are then created and added into mi_cmd_table. The existing mi_cmd class becomes the abstract base class, this has an invoke method and takes care of the suppress notifications handling, before calling a do_invoke virtual method which is implemented by all of the sub-classes. There's currently two different sub-classes, one of pure MI commands, and a second for MI commands that delegate to CLI commands. There should be no user visible changes after this commit. 2021-12-14 Andrew Burgess gdb/mi: int to bool conversion in mi_execute_cli_command Change an argument of mi_execute_cli_command from int to bool. Update the callers to take this into account. Within mi_execute_cli_command, update a comparison of a pointer to 0 with a comparison to nullptr, and add an assert, if we are not using the argument string then the string should be nullptr. Also removed a cryptic 'gdb_????' comment, which isn't really helpful. There should be no user visible changes after this commit. 2021-12-14 Jan Vrany gdb/mi: use std::map for MI commands in mi-cmds.c This changes the hashmap used in mi-cmds.c from a custom structure to std::map. Not only is replacing a custom container with a standard one an improvement, but using std::map will make it easier to dynamically add commands; which is something that is planned for a later series, where we will allow MI commands to be implemented in Python. There should be no user visible changes after this commit. 2021-12-14 Jan Vrany gdb/mi: rename mi_lookup to mi_cmd_lookup Lets give this function a more descriptive name. I've also improved the comments in the header and source files. There should be no user visible changes after this commit. 2021-12-14 Nelson Chu RISC-V: Added ld testcases for the medlow and medany code models. There are two linker scripts, code-model-01.ld and code-model-02.ld, which are corresponding to the two different memory layouts, * code-model-01.ld: the text section is in the 32-bit address range, but the data section is far away from the text section, which means the data section is over the 32-bit address range. * code-model-02.ld: the text section is over the 32-bit address range, but the data section is placed nearly zero address. We use the two linker scripts, to test the current medlow and medany behaviors of GNU ld, including the weak symbol references and the relaxations behaviors. Besides, these testcases also show the limits of the current medlow and medany code models, that is - we may get the truncated to fit errors when linking with the above two linker scripts. ld/ * testsuite/ld-riscv-elf/code-model-01.ld: New testcases to test the behaviors of the current medlow and medany code models. * testsuite/ld-riscv-elf/code-model-02.ld: Likewise. * testsuite/ld-riscv-elf/code-model-medany-01.d: Likewise. * testsuite/ld-riscv-elf/code-model-medany-02.d: Likewise. * testsuite/ld-riscv-elf/code-model-medany-weakref-01.d: Likewise. * testsuite/ld-riscv-elf/code-model-medany-weakref-02.d: Likewise. * testsuite/ld-riscv-elf/code-model-medlow-01.d: Likewise. * testsuite/ld-riscv-elf/code-model-medlow-02.d: Likewise. * testsuite/ld-riscv-elf/code-model-medlow-weakref-01.d: Likewise. * testsuite/ld-riscv-elf/code-model-medlow-weakref-02.d: Likewise. * testsuite/ld-riscv-elf/code-model-relax-medany-01.d: Likewise. * testsuite/ld-riscv-elf/code-model-relax-medany-02.d: Likewise. * testsuite/ld-riscv-elf/code-model-relax-medany-weakref-01.d: Likewise. * testsuite/ld-riscv-elf/code-model-relax-medany-weakref-02.d: Likewise. * testsuite/ld-riscv-elf/code-model-relax-medlow-01.d: Likewise. * testsuite/ld-riscv-elf/code-model-relax-medlow-02.d: Likewise. * testsuite/ld-riscv-elf/code-model-relax-medlow-weakref-01.d: Likewise. * testsuite/ld-riscv-elf/code-model-relax-medlow-weakref-02.d: Likewise. * testsuite/ld-riscv-elf/code-model.s: Likewise. * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated. 2021-12-14 GDB Administrator Automatic date update in version.in 2021-12-13 H.J. Lu x86: Adjust linker tests for --disable-separate-code Adjust linker tests for linker configured with --disable-separate-code: 1. Update expected outputs. 2. Pass -z max-page-size=0x1000 -z separate-code" to linker. * testsuite/ld-i386/report-reloc-1.l: Updated. * testsuite/ld-x86-64/report-reloc-1.l: Likewise. * testsuite/ld-x86-64/pe-x86-64.exp: Pass "-z max-page-size=0x1000 -z separate-code" to linker. * testsuite/ld-x86-64/pr19609-4e.d: Likewise. * testsuite/ld-x86-64/pr19609-6a.d: Likewise. * testsuite/ld-x86-64/pr19609-6b.d: Likewise. * testsuite/ld-x86-64/pr19609-7b.d: Likewise. * testsuite/ld-x86-64/pr19609-7d.d: Likewise. 2021-12-13 Carl Love gdb: Powerpc mark xfail in gdb.base/catch-syscall.exp Powerpc is not reporting the Catchpoint 1 (returned from syscall execve), .... as expected. The issue appears to be with the kernel not returning the expected result. This patch marks the test failure as an xfail. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28623 2021-12-13 Andrew Burgess gdb: improve reuse of value contents when fetching array elements While working on a Python script, which was interacting with a remote target, I noticed some weird slowness in GDB. In my program I had a structure something like this: struct foo_t { int array[5]; }; struct foo_t global_foo; Then in the Python script I was fetching a complete copy of global foo, like: val = gdb.parse_and_eval('global_foo') val.fetch_lazy() Then I would work with items in foo_t.array, like: print(val['array'][1]) I called the fetch_lazy method specifically because I knew I was going to end up accessing almost all of the contents of val, and so I wanted GDB to do a single remote protocol call to fetch all the contents in one go, rather than trying to do lazy fetches for a couple of bytes at a time. What I observed was that, after the fetch_lazy call, GDB does, correctly, fetch the entire contents of global_foo, including all of the contents of array, however, when I access val.array[1], GDB still goes and fetches the value of this element from the remote target. What's going on is that in valarith.c, in value_subscript, for C like languages, we always end up treating the array value as a pointer, and then doing value_ptradd, and value_ind, the second of these calls always returns a lazy value. My guess is that this approach allows us to handle indexing off the end of an array, when working with zero element arrays, or when indexing a raw pointer as an array. And, I agree, that in these cases, where, even when the original value is non-lazy, we still will not have the content of the array loaded, we should be using the value_ind approach. However, for cases where we do have the array contents loaded, and we do know the bounds of the array, I think we should be using value_subscripted_rvalue, which is what we use for non C like languages. One problem I did run into, exposed by gdb.base/charset.exp, was that value_subscripted_rvalue stripped typedefs from the element type of the array, which means the value returned will not have the same type as an element of the array, but would be the raw, non-typedefed, type. In charset.exp we got back an 'int' instead of a 'wchar_t' (which is a typedef of 'int'), and this impacts how we print the value. Removing typedefs from the resulting value just seems wrong, so I got rid of that, and I don't see any test regressions. With this change in place, my original Python script is now doing no additional memory accesses, and its performance increases about 10x! 2021-12-13 Andrew Burgess gdb: update gdb-gdb.py.in for latest changes to struct field This commit updates uses of 'loc' and 'loc_kind' to 'm_loc' and 'm_loc_kind' respectively, in gdb-gdb.py.in, which is required after this commit: commit cd3f655cc7a55437a05aa8e7b1fcc9051b5fe404 Date: Thu Sep 30 22:38:29 2021 -0400 gdb: add accessors for field (and call site) location I have also incorporated this change: https://sourceware.org/pipermail/gdb-patches/2021-September/182171.html Which means we print 'm_name' instead of 'name' when displaying the 'm_name' member variable. Finally, I have also added support for the new TYPE_SPECIFIC_INT fields, which were added with this commit: commit 20a5fcbd5b28cca88511ac5a9ad5e54251e8fa6d Date: Wed Sep 23 09:39:24 2020 -0600 Handle bit offset and bit size in base types I updated the gdb.gdb/python-helper.exp test to cover all of these changes. 2021-12-13 Tankut Baris Aktemur gdbserver/linux-low: replace direct assignment to current_thread Use scoped_restore_current_thread and switch_to_thread in linux_process_target::wait_for_sigstop. 2021-12-13 Tankut Baris Aktemur gdbserver: replace direct assignments to current_thread Replace the direct assignments to current_thread with switch_to_thread. Use scoped_restore_current_thread when appropriate. There is one instance remaining in linux-low.cc's wait_for_sigstop. This will be handled in a separate patch. Regression-tested on X86-64 Linux using the native-gdbserver and native-extended-gdbserver board files. 2021-12-13 Tankut Baris Aktemur gdbserver: introduce scoped_restore_current_thread and switch_to_thread Introduce a class for restoring the current thread and a function to switch to the given thread. This is a preparation for a refactoring that aims to remove direct assignments to 'current_thread'. 2021-12-13 Andrew Burgess gdb: make post_startup_inferior a virtual method on inf_ptrace_target While working on a later patch that required me to understand how GDB starts up inferiors, I was confused by the target_ops::post_startup_inferior method. The post_startup_inferior target function is only called from inf_ptrace_target::create_inferior. Part of the target class hierarchy looks like this: inf_child_target | '-- inf_ptrace_target | |-- linux_nat_target | |-- fbsd_nat_target | |-- nbsd_nat_target | |-- obsd_nat_target | '-- rs6000_nat_target Every sub-class of inf_ptrace_target, except rs6000_nat_target, implements ::post_startup_inferior. The rs6000_nat_target picks up the implementation of ::post_startup_inferior not from inf_ptrace_target, but from inf_child_target. No descendent of inf_child_target, outside the inf_ptrace_target sub-tree, implements ::post_startup_inferior, which isn't really surprising, as they would never see the method called (remember, the method is only called from inf_ptrace_target::create_inferior). What I find confusing is the role inf_child_target plays in implementing, what is really a helper function for just one of its descendents. In this commit I propose that we formally make ::post_startup_inferior a helper function of inf_ptrace_target. To do this I will remove the ::post_startup_inferior from the target_ops API, and instead make this a protected, pure virtual function on inf_ptrace_target. I'll remove the empty implementation of ::post_startup_inferior from the inf_child_target class, and add a new empty implementation to the rs6000_nat_target class. All the other descendents of inf_ptrace_target already provide an implementation of this method and so don't need to change beyond making the method protected within their class declarations. To me, this makes much more sense now. The helper function, which is only called from within the inf_ptrace_target class, is now a part of the inf_ptrace_target class. The only way in which this change is visible to a user is if the user turns on 'set debug target 1'. With this debug flag on, prior to this patch the user would see something like: -> native->post_startup_inferior (...) <- native->post_startup_inferior (2588939) After this patch these lines are no longer present, as the post_startup_inferior is no longer a top level target method. For me, this is an acceptable change. 2021-12-13 Andrew Burgess gdb: have mips_nbsd_nat_target inherit from nbsd_nat_target While working on another patch I had reason to look at mips-netbsd-nat.c, and noticed that the class mips_nbsd_nat_target inherits directly from inf_ptrace_target. This is a little strange as alpha_bsd_nat_target, arm_netbsd_nat_target, hppa_nbsd_nat_target, m68k_bsd_nat_target, ppc_nbsd_nat_target, sh_nbsd_nat_target, and vax_bsd_nat_target all inherit from nbsd_nat_target. Originally, in this commit: commit f6ac5f3d63e03a81c4ff3749aba234961cc9090e Date: Thu May 3 00:37:22 2018 +0100 Convert struct target_ops to C++ When the target tree was converted to C++, all of the above classes inherited from inf_ptrace_target except for hppa_nbsd_nat_target, which was the only class that originally inherited from nbsd_nat_target. Later on all the remaining targets (except mips) were converted to inherit from nbsd_nat_target, these are the commits: commit 4fed520be264b60893aa674071947890f8172915 Date: Sat Mar 14 16:05:24 2020 +0100 Inherit alpha_netbsd_nat_target from nbsd_nat_target commit 6018d381a00515933016c539d2fdc18ad0d304b8 Date: Sat Mar 14 14:50:51 2020 +0100 Inherit arm_netbsd_nat_target from nbsd_nat_target commit 01a801176ea15ddfc988cade2e3d84c3b0abfec3 Date: Sat Mar 14 16:54:42 2020 +0100 Inherit m68k_bsd_nat_target from nbsd_nat_target commit 9faa006d11a5e08264a007463435f84b77864c9c Date: Thu Mar 19 14:52:57 2020 +0100 Inherit ppc_nbsd_nat_target from nbsd_nat_target commit 9809762324491b851332ce600ae9bde8dd34f601 Date: Tue Mar 17 15:07:39 2020 +0100 Inherit sh_nbsd_nat_target from nbsd_nat_target commit d5be5fa4207da00d039a1d5a040ba316e7092cbd Date: Sat Mar 14 13:21:58 2020 +0100 Inherit vax_bsd_nat_target from nbsd_nat_target I could only find mailing list threads for ppc and sh in the archive , and unfortunately, none of the commits has any real detail that might explain why mips was missed out, the only extra context I could find was this message: https://sourceware.org/pipermail/gdb-patches/2020-March/166853.html Which says that "proper" OS support is going to be added to nbsd_nat_target, hence the need to inherit from that class. My guess is that leaving mips_nbsd_nat_target unchanged was an oversight, so, in this commit, I propose changing mips_nbsd_nat_target to inherit from nbsd_nat_target just like all the other nbsd targets. My motivation for this patch relates to the post_startup_inferior target method. In a future commit I want to change how this method is handled. Currently the mips_nbsd_nat_target will pick up the empty implementation of inf_child_target::post_startup_inferior rather than the version in netbsd-nat.c. This feels like a bug to me, as surely, enabling of proc events is something that would need to be done for all netbsd targets, regardless of architecture. In my future patch I have a choice then, either (a) add a new, empty implementation of post_startup_inferior to mips_nbsd_nat_target, or (b) this commit, have mips_nbsd_nat_target inherit from nbsd_nat_target. Option (b) seems like the right way to go, hence, this commit. I've done absolutely no testing for this change, not even building it, as that would require at least an environment in which I can x-build mips-netbsd applications, which I have no idea how to set up. 2021-12-13 Andrew Burgess gdb: only include mips and riscv targets if building with 64-bit bfd While testing another patch I was trying to build different configurations of GDB, and, during one test build I ran into a problem, I configured with `--enable-targets=all --host=i686-w64-mingw32` and saw this error while linking GDB: .../i686-w64-mingw32/bin/ld: mips-tdep.o: in function `mips_gdbarch_init': .../src/gdb/mips-tdep.c:8730: undefined reference to `disassembler_options_mips' .../i686-w64-mingw32/bin/ld: riscv-tdep.o: in function `riscv_gdbarch_init': .../src/gdb/riscv-tdep.c:3851: undefined reference to `disassembler_options_riscv' So the `disassembler_options_mips` and `disassembler_options_riscv` symbols are missing. This turns out to be because mips-dis.c and riscv-dis.c, in which these symbols are defined, are in the TARGET64_LIBOPCODES_CFILES list in opcodes/Makefile.am, these files are only built when we are building with a 64-bit bfd. If we look further, into bfd/Makefile.am, we can see that all the files matching elf*-riscv.lo are in the BFD64_BACKENDS list, as are the elf*-mips.lo files, and (I know because I tried), the two disassemblers do, not surprisingly, depend on features supplied from libbfd. So, though we can build most of GDB just fine for riscv and mips with a 32-bit bfd, if I understand correctly, the final GDB executable (assuming we could get it to link) would not understand these architectures at the bfd level, nor would there be any disassembler available. This sounds like a pretty useless GDB to me. So, in this commit, I move the riscv and mips targets into GDB's list of targets that require a 64-bit bfd. After this I can build GDB just fine with the configure options given above. This was discussed on the mailing list in a couple of threads: https://sourceware.org/pipermail/gdb-patches/2021-December/184365.html https://sourceware.org/pipermail/binutils/2021-November/118498.html and it is agreed, that it is unfortunate that the 32-bit riscv and 32-bit mips targets require a 64-bit bfd. If in the future this situation ever changes then it would be expected that some (or all) of this patch would be reverted. Until then though, this patch allows GDB to build when configured with --enable-targets=all, and when using a 32-bit libbfd. 2021-12-13 GDB Administrator Automatic date update in version.in 2021-12-12 Tom Tromey C++-ify path substitution code I found some uses of xfree in the path substitution code in source.c. C++-ifying struct substitute_path_rule both simplifies the code and removes manual memory management. Regression tested on x86-64 Fedora 34. 2021-12-12 GDB Administrator Automatic date update in version.in 2021-12-11 Alan Modra [GOLD] PowerPC64 @notoc in non-power10 code Gold version of commit 7aba54da42. elfcpp/ * powerpc.h (R_PPC64_REL24_P9NOTOC): Define. gold/ * powerpc.cc (Target_powerpc::maybe_skip_tls_get_addr_call, is_branch_reloc, max_branch_delta): Handle R_PPC64_REL24_P9NOTOC. (Target_powerpc::Branch_info::make_stub): Likewise. (struct Plt_stub_ent): Add p9notoc_, p9off_, tsize_. (struct Branch_stub_ent): Add p9notoc_, p9off_. (Stub_table::add_plt_call_entry): Handle R_PPC64_REL24_P9NOTOC. (Stub_table::add_long_branch_entry): Likewise. (Stub_table::add_eh_frame): Likewise. (Stub_table::plt_call_size): Return aligned size. Adjust callers. Handle p9notoc_ sizing. (Stub_table::do_write): Write out p9notoc_ stubs. (Target_powerpc::Scan::get_reference_flags, local, global): Handle R_PPC64_REL24_P9NOTOC. (Target_powerpc::Relocate::relocate): Likewise. 2021-12-11 H.J. Lu Don't return the main file as the separate debug info On Fedora 35, $ readelf -d /usr/bin/npc caused readelf to run out of stack since load_separate_debug_info returned the input main file as the separate debug info: (gdb) bt #0 load_separate_debug_info ( main_filename=main_filename@entry=0x510f50 "/export/home/hjl/.cache/debuginfod_client/dcc33c51c49e7dafc178fdb5cf8bd8946f965295/debuginfo", xlink=xlink@entry=0x4e5180 , parse_func=parse_func@entry=0x431550 , check_func=check_func@entry=0x432ae0 , func_data=func_data@entry=0x7fffffffdb60, file=file@entry=0x51d430) at /export/gnu/import/git/sources/binutils-gdb/binutils/dwarf.c:11057 #1 0x000000000043328d in check_for_and_load_links (file=0x51d430, filename=0x510f50 "/export/home/hjl/.cache/debuginfod_client/dcc33c51c49e7dafc178fdb5cf8bd8946f965295/debuginfo") at /export/gnu/import/git/sources/binutils-gdb/binutils/dwarf.c:11381 #2 0x00000000004332ae in check_for_and_load_links (file=0x51b070, filename=0x518dd0 "/export/home/hjl/.cache/debuginfod_client/dcc33c51c49e7dafc178fdb5cf8bd8946f965295/debuginfo") Return NULL if the separate debug info is the same as the input main file to avoid infinite recursion. PR binutils/28679 * dwarf.c (load_separate_debug_info): Don't return the input main file. 2021-12-11 Alan Modra Don't edit bogus sh_link on reading relocatable objects (Oracle fix) This reverts a 1995 fix to handle bogus object files. Presumably such object files have long gone. * elf.c (bfd_section_from_shdr): Remove old hack for Oracle libraries. 2021-12-11 GDB Administrator Automatic date update in version.in 2021-12-10 Jan Vrany gdb/testsuite: respect GDBSERVER variable in remote-stdio-gdbserver "board" The comment on top of gdb/testsuite/boards/remote-stdio-gdbserver.exp says that user can specify path to gdbserver on remote system by setting GDBSERVER variable. However, this variable was ignored and /usr/bin/gdbserver was used unconditionally. This commit updates the code to respect GDBSERVER if set and fall back to /usr/bin/gdbserver if not. 2021-12-10 Simon Marchi Revert "gdbsupport: remove unnecessary `#ifndef IN_PROCESS_AGENT`" This reverts commit fe72c32765e1190c8a17d309fc3a7e1882d6a430. It turns out it was wrong, libinproctrace.so does build its own gdbsupport/tdesc.cc. This broke the build: make[1]: Entering directory '/home/simark/build/binutils-gdb-one-target/gdbserver' CXXLD libinproctrace.so /usr/bin/ld: gdbsupport/tdesc-ipa.o: in function `print_xml_feature::visit_pre(target_desc const*)': /home/simark/src/binutils-gdb/gdbserver/../gdbsupport/tdesc.cc:407: undefined reference to `tdesc_architecture_name(target_desc const*)' /usr/bin/ld: /home/simark/src/binutils-gdb/gdbserver/../gdbsupport/tdesc.cc:408: undefined reference to `tdesc_architecture_name(target_desc const*)' /usr/bin/ld: /home/simark/src/binutils-gdb/gdbserver/../gdbsupport/tdesc.cc:411: undefined reference to `tdesc_osabi_name(target_desc const*)' /usr/bin/ld: /home/simark/src/binutils-gdb/gdbserver/../gdbsupport/tdesc.cc:416: undefined reference to `tdesc_compatible_info_list(target_desc const*)' /usr/bin/ld: /home/simark/src/binutils-gdb/gdbserver/../gdbsupport/tdesc.cc:418: undefined reference to `tdesc_compatible_info_arch_name(std::unique_ptr > const&)' 2021-12-10 GDB Administrator Automatic date update in version.in 2021-12-09 Alan Modra PR28674, objdump crash Not returning an error indication here leaves the attribute uninitialised, which then leads to intemperate behaviour. PR 28674 * dwarf2.c (read_attribute_value): Return NULL on trying to read past end of attributes. 2021-12-09 Alan Modra Set sh_link for reloc sections created as normal sections binutils-all/strip-13 and binutils-all/strip-14 tests create SHT_REL/SHT_RELA sections by hand. These don't have sh_link set to the .symtab section as they should, leading to readelf warnings if you happen to be looking at the object files. * elf.c (assign_section_numbers): Formatting. Set sh_link for reloc sections created as normal sections in relocatable objects. 2021-12-09 Simon Marchi gdbsupport: remove unnecessary `#ifndef IN_PROCESS_AGENT` I suppose this code was copied from GDBserver and this ifndef was left there. As far as I know, IN_PROCESS_AGENT will never be defined when building this file, so we can remove this. Change-Id: I84fc408e330b3a29106df830a09342861cadbaf6 2021-12-09 Simon Marchi gdb/microblaze-tdep.c: fix -Wunused-but-set-variable Fix this, seen when building with clang 14: CXX microblaze-tdep.o /home/simark/src/binutils-gdb/gdb/microblaze-tdep.c:207:7: error: variable 'flags' set but not used [-Werror,-Wunused-but-set-variable] int flags = 0; ^ Change-Id: I59f726ed33e924912748bc475b6fd9a9394fc0d0 2021-12-09 Simon Marchi gdb/csky-tdep.c: fix -Wunused-but-set-variable error Fix these, seen when building with clang 14: CXX csky-tdep.o /home/simark/src/binutils-gdb/gdb/csky-tdep.c:332:7: error: variable 'need_dummy_stack' set but not used [-Werror,-Wunused-but-set-variable] int need_dummy_stack = 0; ^ /home/simark/src/binutils-gdb/gdb/csky-tdep.c:805:12: error: variable 'offset' set but not used [-Werror,-Wunused-but-set-variable] int offset = 0; ^ Change-Id: I6703bcb50e83c50083f716f4084ef6aa30d659c4 2021-12-09 Simon Marchi gdb/testsuite: fix default behavior of runto The documented behavior of proc runto is to not emit a PASS when succeeding to to run to the specified location, but emit a FAIL when failing to do so. I suppose the intent is that it won't pollute the results normally passing tests (although I don't see why we would care), but make visible any problems. However, it seems like the implementation makes it default to never print anything. "no-message" is prependend to "args", so if "message" is not passed, we will always take the path that sets print_fail to 0, which will silence any failure. This unfortunately means that tests relying on runto_main won't emit a FAIL if failing to run to main. And since commit 4dfef5be6812 ("gdb/testsuite: make runto_main not pass no-message to runto"), tests don't emit a FAIL themselves when failing to run to main. This means that tests failing to run to main just fail silently, and that's bad. This can be reproduced by hacking gdb.base/template.exp like so: diff --git a/gdb/testsuite/gdb.base/template.c b/gdb/testsuite/gdb.base/template.c index bcf39c377d92..052be5b79d73 100644 --- a/gdb/testsuite/gdb.base/template.c +++ b/gdb/testsuite/gdb.base/template.c @@ -15,6 +15,14 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ +#include + +__attribute__((constructor)) +static void c (void) +{ + exit (1); +} + int main (void) { Running the modified gdb.base/template.exp shows that it exits without printing any result. Remove the line that prepends no-message to args, that should make runto's behavior match its documentation. This patch will appear to add many failures, but in reality they already existed, they were just silenced. Change-Id: I2a730d5bc72b6ef0698cd6aad962d9902aa7c3d6 2021-12-09 Carl Love gdb fix elfv1 Powerpc gdb.dwarf2/frame-inlined-in-outer-frame.exp On ELFv1, the _start symbol must point to the *function descriptor* (in the .opd section), not to the function code (in the .text section) like with ELFv2 and other architectures. 2021-12-09 Tom de Vries [gdb/testsuite] Fix gdb.base/maint.exp with -readnow With test-case gdb.base/maint.exp and target board -readnow, I run into: ... FAIL: gdb.base/maint.exp: maint info line-table w/o a file name ... The problem is that this and other regexps anchored using '^': ... -re "^$gdb_prompt $" { ... don't trigger because other regexps don't consume the entire preceding line. This is partly due to the addition of the IS-STMT column. Fix this by making the regexps consume entire lines. Tested on x86_64-linux with native and target board readnow, as well as check-read1 and check-readmore. 2021-12-09 Tom de Vries [gdb/testsuite] Fix gdb.base/include-main.exp with -readnow With test-case gdb.base/include-main.exp and target board readnow, I run into: ... FAIL: gdb.base/include-main.exp: maint info symtab ... The corresponding check in gdb.base/include-main.exp: ... gdb_test_no_output "maint info symtab" ... checks that no CU was expanded, while -readnow ensures that all CUs are expanded. Fix this by skipping the check with -readnow. Tested on x86_64-linux, with native and target board readnow. 2021-12-09 Nelson Chu RISC-V: Clarify the behavior of .option arch directive. * To be consistent with -march option, removed the "=" operator when user want to reset the whole architecture string. So the formats are, .option arch, +, ... .option arch, - .option arch, * Don't allow to add or remove the base extensions in the .option arch directive. Instead, users should reset the whole architecture string while they want to change the base extension. * The operator "+" won't update the version of extension, if the extension is already in the subset list. bfd/ * elfxx-riscv.c (riscv_add_subset): Don't update the version if the extension is already in the subset list. (riscv_update_subset): To be consistent with -march option, removed the "=" operator when user want to reset the whole architecture string. Besides, Don't allow to add or remove the base extensions in the .option arch directive. gas/ * testsuite/gas/riscv/option-arch-01.s: Updated since we cannot add or remove the base extensions in the .option arch directive. * testsuite/gas/riscv/option-arch-02.s: Likewise. * testsuite/gas/riscv/option-arch-fail.l: Likewise. * testsuite/gas/riscv/option-arch-fail.s: Likewise. * testsuite/gas/riscv/option-arch-01a.d: Set -misa-spec=2.2. * testsuite/gas/riscv/option-arch-01b.d: Likewise. * testsuite/gas/riscv/option-arch-02.d: Updated since the .option arch, + won't change the version of extension, if the extension is already in the subset list. * testsuite/gas/riscv/option-arch-03.s: Removed the "=" operator when resetting the whole architecture string. 2021-12-09 Mike Frysinger sim: use ## for automake comments The ## marker tells automake to not include the comment in its generated output, so use that in most places where the comment only makes sense in the inputs. 2021-12-09 Simon Marchi gdb, gdbserver: detach fork child when detaching from fork parent While working with pending fork events, I wondered what would happen if the user detached an inferior while a thread of that inferior had a pending fork event. What happens with the fork child, which is ptrace-attached by the GDB process (or by GDBserver), but not known to the core? Sure enough, neither the core of GDB or the target detach the child process, so GDB (or GDBserver) just stays ptrace-attached to the process. The result is that the fork child process is stuck, while you would expect it to be detached and run. Make GDBserver detach of fork children it knows about. That is done in the generic handle_detach function. Since a process_info already exists for the child, we can simply call detach_inferior on it. GDB-side, make the linux-nat and remote targets detach of fork children known because of pending fork events. These pending fork events can be stored in: - thread_info::pending_waitstatus, if the core has consumed the event but then saved it for later (for example, because it got the event while stopping all threads, to present an all-stop stop on top of a non-stop target) - thread_info::pending_follow: if we ran to a "catch fork" and we detach at that moment Additionally, pending fork events can be in target-specific fields: - For linux-nat, they can be in lwp_info::status and lwp_info::waitstatus. - For the remote target, they could be stored as pending stop replies, saved in `remote_state::notif_state::pending_event`, if not acknowledged yet, or in `remote_state::stop_reply_queue`, if acknowledged. I followed the model of remove_new_fork_children for this: call remote_notif_get_pending_events to process / acknowledge any unacknowledged notification, then look through stop_reply_queue. Update the gdb.threads/pending-fork-event.exp test (and rename it to gdb.threads/pending-fork-event-detach.exp) to try to detach the process while it is stopped with a pending fork event. In order to verify that the fork child process is correctly detached and resumes execution outside of GDB's control, make that process create a file in the test output directory, and make the test wait $timeout seconds for that file to appear (it happens instantly if everything goes well). This test catches a bug in linux-nat.c, also reported as PR 28512 ("waitstatus.h:300: internal-error: gdb_signal target_waitstatus::sig() const: Assertion `m_kind == TARGET_WAITKIND_STOPPED || m_kind == TARGET_WAITKIND_SIGNALLED' failed.). When detaching a thread with a pending event, get_detach_signal unconditionally fetches the signal stored in the waitstatus (`tp->pending_waitstatus ().sig ()`). However, that is only valid if the pending event is of type TARGET_WAITKIND_STOPPED, and this is now enforced using assertions (iit would also be valid for TARGET_WAITKIND_SIGNALLED, but that would mean the thread does not exist anymore, so we wouldn't be detaching it). Add a condition in get_detach_signal to access the signal number only if the wait status is of kind TARGET_WAITKIND_STOPPED, and use GDB_SIGNAL_0 instead (since the thread was not stopped with a signal to begin with). Add another test, gdb.threads/pending-fork-event-ns.exp, specifically to verify that we consider events in pending stop replies in the remote target. This test has many threads constantly forking, and we detach from the program while the program is executing. That gives us some chance that we detach while a fork stop reply is stored in the remote target. To verify that we correctly detach all fork children, we ask the parent to exit by sending it a SIGUSR1 signal and have it write a file to the filesystem before exiting. Because the parent's main thread joins the forking threads, and the forking threads wait for their fork children to exit, if some fork child is not detach by GDB, the parent will not write the file, and the test will time out. If I remove the new remote_detach_pid calls in remote.c, the test fails eventually if I run it in a loop. There is a known limitation: we don't remove breakpoints from the children before detaching it. So the children, could hit a trap instruction after being detached and crash. I know this is wrong, and it should be fixed, but I would like to handle that later. The current patch doesn't fix everything, but it's a step in the right direction. Change-Id: I6d811a56f520e3cb92d5ea563ad38976f92e93dd Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28512 2021-12-09 Simon Marchi gdb: move clearing of tp->pending_follow to follow_fork_inferior A following patch will change targets so that when they detach an inferior, they also detach any pending fork children this inferior may have. While doing this, I hit a case where we couldn't differentiate two cases, where in one we should detach the fork detach but not in the other. Suppose we continue past a fork with "follow-fork-mode == child" && "detach-on-fork on". follow_fork_inferior calls target_detach to detach the parent. In that case the target should not detach the fork child, as we'll continue debugging the child. As of now, the tp->pending_follow field of the thread who called fork still contains the details about the fork. Then, suppose we run to a fork catchpoint and the user types "detach". In that case, the target should detach the fork child in addition to the parent. In that case as well, the tp->pending_follow field contains the details about the fork. To allow targets to differentiate the two cases, clear tp->pending_follow a bit earlier, when following a fork. Targets will then see that tp->pending_follow contains TARGET_WAITKIND_SPURIOUS, and won't detach the fork child. As of this patch, no behavior changes are expected. Change-Id: I537741859ed712cb531baaefc78bb934e2a28153 2021-12-09 Simon Marchi gdb/remote.c: refactor pending fork status functions In preparation for a following patch, refactor a few things that I did find a bit awkward, and to make them a bit more reusable. - Pass an inferior to kill_new_fork_children instead of a pid. That allows iterating on only this inferior's threads and avoid further filtering on the thread's pid. - Change thread_pending_fork_status to return a non-nullptr value only if the thread does have a pending fork status. - Remove is_pending_fork_parent_thread, as one can just use thread_pending_fork_status and check for nullptr. - Replace is_pending_fork_parent with is_fork_status, which just returns if the given target_waitkind if a fork or a vfork. Push filtering on the pid to the callers, when it is necessary. Change-Id: I0764ccc684d40f054e39df6fa5458cc4c5d1cd7b 2021-12-09 Simon Marchi gdb/remote.c: move some things up Move the stop_reply and a few functions up. Some code above them in the file will need to use them in a following patch. No behavior changes expected here. Change-Id: I3ca57d0e3ec253f56e1ba401289d9d167de14ad2 2021-12-09 Simon Marchi gdb/linux-nat: factor ptrace-detach code to new detach_one_pid function The following patch will add some code paths that need to ptrace-detach a given PID. Factor out the code that does this and put it in its own function, so that it can be re-used. Change-Id: Ie65ca0d89893b41aea0a23d9fc6ffbed042a9705 2021-12-09 Simon Marchi gdbserver: hide fork child threads from GDB This patch aims at fixing a bug where an inferior is unexpectedly created when a fork happens at the same time as another event, and that other event is reported to GDB first (and the fork event stays pending in GDBserver). This happens for example when we step a thread and another thread forks at the same time. The bug looks like (if I reproduce the included test by hand): (gdb) show detach-on-fork Whether gdb will detach the child of a fork is on. (gdb) show follow-fork-mode Debugger response to a program call of fork or vfork is "parent". (gdb) si [New inferior 2] Reading /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.threads/step-while-fork-in-other-thread/step-while-fork-in-other-thread from remote target... Reading /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.threads/step-while-fork-in-other-thread/step-while-fork-in-other-thread from remote target... Reading symbols from target:/home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.threads/step-while-fork-in-other-thread/step-while-fork-in-other-thread... [New Thread 965190.965190] [Switching to Thread 965190.965190] Remote 'g' packet reply is too long (expected 560 bytes, got 816 bytes): ... The sequence of events leading to the problem is: - We are using the all-stop user-visible mode as well as the synchronous / all-stop variant of the remote protocol - We have two threads, thread A that we single-step and thread B that calls fork at the same time - GDBserver's linux_process_target::wait pulls the "single step complete SIGTRAP" and the "fork" events from the kernel. It arbitrarily choses one event to report, it happens to be the single-step SIGTRAP. The fork stays pending in the thread_info. - GDBserver send that SIGTRAP as a stop reply to GDB - While in stop_all_threads, GDB calls update_thread_list, which ends up querying the remote thread list using qXfer:threads:read. - In the reply, GDBserver includes the fork child created as a result of thread B's fork. - GDB-side, the remote target sees the new PID, calls remote_notice_new_inferior, which ends up unexpectedly creating a new inferior, and things go downhill from there. The problem here is that as long as GDB did not process the fork event, it should pretend the fork child does not exist. Ultimately, this event will be reported, we'll go through follow_fork, and that process will be detached. The remote target (GDB-side), has some code to remove from the reported thread list the threads that are the result of forks not processed by GDB yet. But that only works for fork events that have made their way to the remote target (GDB-side), but haven't been consumed by the core yet, so are still lingering as pending stop replies in the remote target (see remove_new_fork_children in remote.c). But in our case, the fork event hasn't made its way to the GDB-side remote target. We need to implement the same kind of logic GDBserver-side: if there exists a thread / inferior that is the result of a fork event GDBserver hasn't reported yet, it should exclude that thread / inferior from the reported thread list. This was actually discussed a while ago, but not implemented AFAIK: https://pi.simark.ca/gdb-patches/1ad9f5a8-d00e-9a26-b0c9-3f4066af5142@redhat.com/#t https://sourceware.org/pipermail/gdb-patches/2016-June/133906.html Implementation details-wise, the fix for this is all in GDBserver. The Linux layer of GDBserver already tracks unreported fork parent / child relationships using the lwp_info::fork_relative, in order to avoid wildcard actions resuming fork childs unknown to GDB. This information needs to be made available to the handle_qxfer_threads_worker function, so it can filter the reported threads. Add a new thread_pending_parent target function that allows the Linux target to return the parent of an eventual fork child. Testing-wise, the test replicates pretty-much the sequence of events shown above. The setup of the test makes it such that the main thread is about to fork. We stepi the other thread, so that the step completes very quickly, in a single event. Meanwhile, the main thread is resumed, so very likely has time to call fork. This means that the bug may not reproduce every time (if the main thread does not have time to call fork), but it will reproduce more often than not. The test fails without the fix applied on the native-gdbserver and native-extended-gdbserver boards. At some point I suspected that which thread called fork and which thread did the step influenced the order in which the events were reported, and therefore the reproducibility of the bug. So I made the test try both combinations: main thread forks while other thread steps, and vice versa. I'm not sure this is still necessary, but I left it there anyway. It doesn't hurt to test a few more combinations. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28288 Change-Id: I2158d5732fc7d7ca06b0eb01f88cf27bf527b990 2021-12-09 GDB Administrator Automatic date update in version.in 2021-12-08 Tom Tromey Use for-each more in gdb There are some loops in gdb that use ARRAY_SIZE (or a wordier equivalent) to loop over a static array. This patch changes some of these to use foreach instead. Regression tested on x86-64 Fedora 34. 2021-12-08 Tom Tromey Fix error in file_and_directory patch In my earlier C++-ization patch for file_and_directory, I introduced an error: - if (strcmp (fnd.name, "") != 0) + if (fnd.is_unknown ()) This change inverted the sense of the test, which causes failures with .debug_names. This patch fixes the bug. Regression tested on x86-64 Fedora 34. I also tested it using the AdaCore internal test suite, with .debug_names -- this was failing before, and now it works. 2021-12-08 Andrew Burgess gdb/python: Use tp_init instead of tp_new to setup gdb.Value The documentation suggests that we implement gdb.Value.__init__, however, this is not currently true, we really implement gdb.Value.__new__. This will cause confusion if a user tries to sub-class gdb.Value. They might write: class MyVal (gdb.Value): def __init__ (self, val): gdb.Value.__init__(self, val) obj = MyVal(123) print ("Got: %s" % obj) But, when they source this code they'll see: (gdb) source ~/tmp/value-test.py Traceback (most recent call last): File "/home/andrew/tmp/value-test.py", line 7, in obj = MyVal(123) File "/home/andrew/tmp/value-test.py", line 5, in __init__ gdb.Value.__init__(self, val) TypeError: object.__init__() takes exactly one argument (the instance to initialize) (gdb) The reason for this is that, as we don't implement __init__ for gdb.Value, Python ends up calling object.__init__ instead, which doesn't expect any arguments. The Python docs suggest that the reason why we might take this approach is because we want gdb.Value to be immutable: https://docs.python.org/3/c-api/typeobj.html#c.PyTypeObject.tp_new But I don't see any reason why we should require gdb.Value to be immutable when other types defined in GDB are not. This current immutability can be seen in this code: obj = gdb.Value(1234) print("Got: %s" % obj) obj.__init__ (5678) print("Got: %s" % obj) Which currently runs without error, but prints: Got: 1234 Got: 1234 In this commit I propose that we switch to using __init__ to initialize gdb.Value objects. This does introduce some additional complexity, during the __init__ call a gdb.Value might already be associated with a gdb value object, in which case we need to cleanly break that association before installing the new gdb value object. However, the cost of doing this is not great, and the benefit - being able to easily sub-class gdb.Value seems worth it. After this commit the first example above works without error, while the second example now prints: Got: 1234 Got: 5678 In order to make it easier to override the gdb.Value.__init__ method, I have tweaked the definition of gdb.Value.__init__. The second, optional argument to __init__ is a gdb.Type, if this argument is not present then GDB figures out a suitable type. However, if we want to override the __init__ method in a sub-class, and still support the default argument, it is easier to write: class MyVal (gdb.Value): def __init__ (self, val, type=None): gdb.Value.__init__(self, val, type) Currently, passing None for the Type will result in an error: TypeError: type argument must be a gdb.Type. After this commit I now allow the type argument to be None, in which case GDB figures out a suitable type just as if the type had not been passed at all. Unless a user is trying to reinitialize a value, or create sub-classes of gdb.Value, there should be no user visible changes after this commit. 2021-12-08 Andrew Burgess gdb: use try/catch around a gdb_disassembler::print_insn call While investigating some disassembler problems I ran into this case; GDB compiled on a 32-bit arm target, with --enable-targets=all. Then in GDB: (gdb) set architecture i386 (gdb) disassemble 0x0,+4 unknown disassembler error (error = -1) This is interesting because it shows a case where the libopcodes disassembler is returning -1 without first calling the memory_error_func callback. Indeed, the return from libopcodes happens from this code snippet in i386-dis.c in the print_insn function: if (address_mode == mode_64bit && sizeof (bfd_vma) < 8) { (*info->fprintf_func) (info->stream, _("64-bit address is disabled")); return -1; } Notice how, prior to the return the disassembler tries to print a helpful message out, but GDB doesn't print this message. The reason this message goes missing is the call stack, it looks like this: gdb_pretty_print_disassembler::pretty_print_insn gdb_disassembler::print_insn gdbarch_print_insn ... i386-dis.c:print_insn When i386-dis.c:print_insn returns -1 this is handled in gdb_disassembler::print_insn, where an exception is thrown. However, the actual printing of the disassembler output is done in gdb_pretty_print_disassembler::pretty_print_insn, and is only done if an exception is not thrown. In this commit I change this. The pretty_print_insn now uses try/catch around the call to gdb_disassembler::print_insn, if we catch an error then we first print any pending output in the instruction buffer, before rethrowing the exception. As a result, even if an exception is thrown we still print any pending disassembler output to the screen; in the above case the helpful message will now be shown. Before my patch we might expect to see this output: (gdb) disassemble 0x0,+4 Dump of assembler code from 0x0 to 0x4: 0x0000000000000000: unknown disassembler error (error = -1) (gdb) But now we see this: (gdb) disassemble 0x0,+4 Dump of assembler code from 0x0 to 0x4: 0x0000000000000000: 64-bit address is disabled unknown disassembler error (error = -1) If the disassembler returns -1 without printing a helpful message then we would still expect a change in output, something like: (gdb) disassemble 0x0,+4 Dump of assembler code from 0x0 to 0x4: 0x0000000000000000: unknown disassembler error (error = -1) Which I think is still acceptable, though at this point I think a strong case can be made that this is a disassembler bug (not printing anything, but still returning -1). Notice however, that the error message is always printed on a new line now. This is also true for the memory error case, where before we might see this: (gdb) disassemble 0x0,+4 Dump of assembler code from 0x0 to 0x4: 0x00000000: Cannot access memory at address 0x0 We now get this: (gdb) disassemble 0x0,+4 Dump of assembler code from 0x0 to 0x4: 0x00000000: Cannot access memory at address 0x0 For me, I'm happy to accept this change, having the error on a line by itself, rather than just appended to the end of the previous line, seems like an improvement, but I'm aware others might feel differently, so I'd appreciate any feedback. 2021-12-08 Jan Vrany ppc: recognize all program traps Permanent program breakpoints (ones inserted into the code) other than the one GDB uses for POWER (0x7fe00008) did not result in stop but caused GDB to loop infinitely. This was because GDB did not recognize trap instructions other than "trap". For example, "tw 12, 4, 4" was not be recognized, causing GDB to loop forever. This commit fixes this by providing POWER specific hook (gdbarch_program_breakpoint_here_p) recognizing all tw, twi, td and tdi instructions. Tested on Linux on PowerPC e500 and on QEMU PPC64le. 2021-12-08 Jan Vrany ppc: use "trap" ("tw, 31, 0, 0") as breakpoint instruction Power ISA 3.0 B spec [1], sections 3.3.11 "Fixed-Point Trap Instructions" and section C.6 "Trap Mnemonics" specify "tw, 31, 0, 0" (encoded as 0x7fe00008) as canonical unconditional trap instruction. This commit changes the breakpoint instruction used by GDB from "tw 12, r2, r2" to unconditional "trap". [1]: https://openpowerfoundation.org/?resource_lib=power-isa-version-3-0 2021-12-08 Fangrui Song bfd_section_from_shdr: Support SHT_RELR sections If a.so contains an SHT_RELR section, objcopy a.so will fail with: a.so: unknown type [0x13] section `.relr.dyn' This change allows objcopy to work. bfd/ * elf.c (bfd_section_from_shdr): Support SHT_RELR. 2021-12-08 Alan Modra PR28673, input file 'gcov' is the same as output file PR 28673 * ldlang.c (open_output): Use local_sym_name when checking output against input files rather than filename. 2021-12-08 Tom Tromey Fix bug in source.c change My earlier change to source.c ("Remove an xfree from add_path") introduced a regression. This patch fixes the problem. 2021-12-08 Simon Marchi gdb: make struct linespect contain vectors, not pointers to vectors struct linespec contains pointers to vectors, instead of containing vectors directly. This is probably historical, when linespec_parser (which contains a struct linespec field) was not C++-ified yet. But it seems easy to change the pointers to vectors to just vectors today. This simplifies the code, we don't need to manually allocate and delete the vectors and there's no pointer that can be NULL. As far as I understand, there was not meaningful distinction between a NULL pointer to vector and an empty vector. So all NULL checks are changed for !empty checks. Change-Id: Ie759707da14d9d984169b93233343a86e2de9ee6 2021-12-08 GDB Administrator Automatic date update in version.in 2021-12-07 Tom Tromey Remove an xfree from add_path This removes a temporary \0 assignment and an xfree from add_path, replacing it with a simpler use of std::string. 2021-12-07 Simon Marchi gdb/linespec.c: simplify condition We can remove the empty check: if the vector has size 1, it is obviously not empty. This code ended up like this because the empty check used to be a NULL check. Change-Id: I1571bd0228818ca93f6a6b444e9b010dc2da4c08 2021-12-07 Simon Marchi gdb: rename "maint agent" functions Functions agent_eval_command and agent_command are used to implement maintenance commands, rename them accordingly (with the maint_ prefix), as well as the agent_command_1 helper function. Change-Id: Iacf96d4a0a26298e8dd4648a0f38da649ea5ef61 2021-12-07 Simon Marchi gdb: make set_raw_breakpoint static set_raw_breakpoint is only used in breakpoint.c, make it static. Change-Id: I7fbeda067685309a30b88aceaf957eff7a28e310 2021-12-07 John Baldwin Support AT_FXRNG and AT_KPRELOAD on FreeBSD. FreeBSD's kernel has recently added two new ELF auxiliary vector entries. AT_FXRNG points to a root seed version for the kernel's PRNG. Userland can use this to reseed a userland PRNG after the kernel's PRNG has reseeded. AT_KPRELOAD is the base address of a kernel-provided vDSO. This change displays the proper name and description of these entries in 'info auxv'. include/ChangeLog: * elf/common.h (AT_FREEBSD_FXRNG, AT_FREEBSD_KPRELOAD): Define. 2021-12-07 Tom Tromey Avoid extra work in global_symbol_searcher::expand_symtabs I noticed that global_symbol_searcher::expand_symtabs always passes a file matcher to expand_symtabs_matching. However, if 'filenames' is empty, then this always returns true. It's slightly more efficient to pass a null file matcher in this case, because that lets the "quick" symbol implementations skip any filename checks. Regression tested on x86-64 Fedora 34. 2021-12-07 Tom de Vries [gdb/testsuite] Fix options arg handling in compile_jit_elf_main_as_so In commit 80ad340c902 ("[gdb/testsuite] use -Ttext-segment for jit-elf tests") the following change was made: ... proc compile_jit_elf_main_as_so {main_solib_srcfile main_solib_binfile options} { - set options [concat $options debug] + global jit_load_address jit_load_increment + + set options [list \ + additional_flags="-DMAIN=jit_dl_main" \ + additional_flags=-DLOAD_ADDRESS=$jit_load_address \ + additional_flags=-DLOAD_INCREMENT=$jit_load_increment \ + debug] ... Before the change, the options argument was used, but after the change not anymore. Fix this by reverting back to using "set options [concat $options ...]". Fixing this gets us twice the -DMAIN=jit_dl_main bit, once from a caller, and once from compile_jit_elf_main_as_so. Fix this by removing the bit from compile_jit_elf_main_as_so, which makes the code similar to compile_jit_main. Tested on x86_64-linux. 2021-12-07 Tom de Vries [gdb/testsuite] Fix FAIL in gdb.tui/basic.exp On openSUSE Leap 15.2 aarch64 I ran into: ... FAIL: gdb.tui/basic.exp: check main is where we expect on the screen ... while this is passing on x86_64. On x86_64-linux we have at the initial screen dump for "list -q main": ... 0 +-/home/vries/gdb_versions/devel/src/gdb/testsuite/gdb.tui/tui-layout.c--+ 1 | 15 You should have received a copy of the GNU General Public | 2 | 16 along with this program. If not, see \ and ends at 0x4004ab . ... and on aarch64 instead: ... $ gdb -q -batch outputs/gdb.tui/basic/basic -ex "info line main" Line 21 of "tui-layout.c" starts at address 0x4005f4
\ and ends at 0x4005f8 . ... Fix this by using a new source file main-one-line.c, that implements the entire main function on a single line, in order to force the compiler to use that line number. Also try to do less hard-coding in the test-case. Tested on x86_64-linux and aarch64-linux. 2021-12-07 Tom de Vries [gdb/tdep] Fix inferior plt calls in PIE for i386 Consider test-case test.c: ... int main (void) { void *p = malloc (10); return 0; } ... When compiled to a non-PIE exec: ... $ gcc -m32 test.c ... the call sequence looks like: ... 8048447: 83 ec 0c sub $0xc,%esp 804844a: 6a 0a push $0xa 804844c: e8 bf fe ff ff call 8048310 ... which calls to: ... 08048310 : 8048310: ff 25 0c a0 04 08 jmp *0x804a00c 8048316: 68 00 00 00 00 push $0x0 804831b: e9 e0 ff ff ff jmp 8048300 <.plt> ... where the first insn at 0x8048310 initially jumps to the following address 0x8048316, read from the .got.plt @ 0x804a00c: ... 804a000 0c9f0408 00000000 00000000 16830408 ................ 804a010 26830408 &... ... Likewise, when compiled as a PIE: ... $ gcc -m32 -fPIE -pie test.c ... we have this call sequence (with %ebx setup to point to the .got.plt): ... 0000055d
: 579: 83 ec 0c sub $0xc,%esp 57c: 6a 0a push $0xa 57e: 89 c3 mov %eax,%ebx 580: e8 6b fe ff ff call 3f0 ... which calls to: ... 000003f0 : 3f0: ff a3 0c 00 00 00 jmp *0xc(%ebx) 3f6: 68 00 00 00 00 push $0x0 3fb: e9 e0 ff ff ff jmp 3e0 <.plt> ... where the insn at 0x3f0 initially jumps to following address 0x3f6, read from the .got.plt at offset 0xc: ... 2000 f41e0000 00000000 00000000 f6030000 ................ 2010 06040000 .... ... When instead doing an inferior call to malloc (with nosharedlib to force malloc to resolve to malloc@plt rather than the functions in ld.so or libc.so) with the non-PIE exec, we have the expected: ... $ gdb -q -batch a.out -ex start -ex nosharedlib -ex "p /x (void *)malloc (10)" Temporary breakpoint 1 at 0x8048444 Temporary breakpoint 1, 0x08048444 in main () $1 = 0x804b160 ... But with the PIE exec, we run into: ... $ gdb -q -batch a.out -ex start -ex nosharedlib -ex "p /x (void *)malloc (10)" Temporary breakpoint 1 at 0x56c Temporary breakpoint 1, 0x5655556c in main () Program received signal SIGSEGV, Segmentation fault. 0x565553f0 in malloc@plt () ... The segfault happens because: - the inferior call mechanism doesn't setup %ebx - %ebx instead is 0 - the jump to "*0xc(%ebx)" reads from memory at 0xc Fix this by setting up %ebx properly in i386_thiscall_push_dummy_call. Fixes this failure with target board unix/-m32/-pie/-fPIE reported in PR28467: ... FAIL: gdb.base/nodebug.exp: p/c (int) array_index("abcdef",2) ... Tested on x86_64-linux, with target board unix/-m32 and unix/-m32/-fPIE/-pie. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28467 2021-12-07 Tom de Vries [gdb/symtab] Support -readnow during reread When running test-case gdb.base/cached-source-file.exp with target board readnow, we run into: ... FAIL: gdb.base/cached-source-file.exp: rerun program (the program exited) ... The problem is that when rereading, the readnow is ignored. Fix this by copying the readnow handling code from symbol_file_add_with_addrs to reread_symbols. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26800 2021-12-07 Tom de Vries [gdb/ada] Fix assert in ada_is_unconstrained_packed_array_type On openSUSE Leap 42.3, with system compiler gcc 4.8.5 I run into: ... (gdb) print u_one_two_three^M src/gdb/gdbtypes.h:1050: internal-error: field: \ Assertion `idx >= 0 && idx < num_fields ()' failed.^M ... We run into trouble while doing this in ada_is_unconstrained_packed_array_type: ... 1953 return TYPE_FIELD_BITSIZE (type, 0) > 0; ... which tries to get field 0 from a type without fields: ... (gdb) p type->num_fields () $6 = 0 ... which is the case because the type is a typedef: ... (gdb) p type->code () $7 = TYPE_CODE_TYPEDEF ... Fix this by using the type referenced by the typedef instead. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28323 2021-12-07 Alan Modra Re: Add support for AArch64 EFI (efi-*-aarch64) Commit b69c9d41e8 was broken in multiple ways regarding the realloc of the target string, most notably in that "-little" wasn't actually appended to the input_target or output_target. This caused asan errors and "FAIL: Check if efi app format is recognized". I also noticed that the input_target string wasn't being copied but rather the output_target when dealing with the input target. Fix that too. PR 26206 * objcopy.c (convert_efi_target): Rewrite. Allocate modified target strings here.. (copy_main): ..rather than here. Do handle input_target, not output_target for input. 2021-12-07 Alan Modra Error on ld output file name matching input file name It's not foolproof, for example we don't catch output to a linker script, to a library specified with -l, or to an element of a thin archive. * ldlang.c (open_output): Exit with error on output file matching an input file. * testsuite/ld-misc/just-symbols.exp: Adjust ld -r test to suit. 2021-12-07 GDB Administrator Automatic date update in version.in 2021-12-06 Carl Love gdb: Add PowerPC support to gdb.dwarf2/frame-inlined-in-outer-frame This patch adds an #elif defined for PowerPC to setup the exit_0 macro. This patch addes the needed macro definitionald logic to handle both elfV1 and elfV2. The patch has been successfully tested on both PowerPC BE, Powerpc LE and X86_64 with no regressions. 2021-12-06 Tom de Vries [gdb/testsuite] Use precise align in gdb.arch/i386-{avx,sse}.exp Test-cases gdb.arch/i386-{avx,sse}.exp use assembly instructions that require the memory operands to be aligned to a certain boundary, and the test-cases use C11's _Alignas to make that happen. The draw-back of using _Alignas is that while it does enforce a minimum alignment, the actual alignment may be bigger, which makes the following scenario possible: - copy say, gdb.arch/i386-avx.c as basis for a new test-case - run the test-case and observe a PASS - commit the new test-case in the supposition that the test-case is correct and well-tested - run later into a failure on a different test setup (which may be a setup where reproduction and investigation is more difficult and time-consuming), and find out that the specified alignment was incorrect and should have been updated to say, 64 bytes. The initial PASS occurred only because the actual alignment happened to be greater than required. The idea of having precise alignment as a means of having more predictable execution which allows flushing out bugs earlier, has been filed as PR gcc/103095. Add a new file lib/precise-aligned-alloc.c with functions precise_aligned_alloc and precise_aligned_dup, to support precise alignment. Use precise_aligned_dup in aforementioned test-cases to: - verify that the specified alignment is indeed sufficient, rather than too little but accidentally over-aligned. - prevent the same type of problems in any new test-cases based on these Tested on x86_64-linux, with both gcc and clang. 2021-12-06 Tom de Vries [gdb/testsuite] Fix data alignment in gdb.arch/i386-{avx,sse}.exp When running test-case gdb.arch/i386-avx.exp with clang I ran into: ... (gdb) PASS: gdb.arch/i386-avx.exp: set first breakpoint in main continue^M Continuing.^M ^M Program received signal SIGSEGV, Segmentation fault.^M 0x000000000040052b in main (argc=1, argv=0x7fffffffd3c8) at i386-avx.c:54^M 54 asm ("vmovaps 0(%0), %%ymm0\n\t"^M (gdb) FAIL: gdb.arch/i386-avx.exp: continue to breakpoint: \ continue to first breakpoint in main ... The problem is that the vmovaps insn requires an 256-bit (or 32-byte) aligned address, and it's only 16-byte aligned: ... (gdb) p /x $rax $1 = 0x601030 ... Fix this by using a sufficiently aligned address, using _Alignas. Compile using -std=gnu11 to support _Alignas. Likewise in gdb.arch/i386-sse.exp. Tested on x86_64-linux, with both gcc and clang. 2021-12-06 Alan Modra [GOLD] PowerPC64 inline plt sequences The fixes gold failures to handle inline PLT sequences properly. PowerPC gold was always turning these back into direct calls due to gsym->use_plt_offset() returning false. This is fixed for dynamic linking by correcting get_reference_flags, and for static linking by overriding use_plt_offset() in relocate(). The rest of the patch revolves around needing to create PLT entries for inline PLT calls when statically linking (for gcc -mlongcall). The lplt section handled that for local symbols, now it does globals too. * powerpc.cc (Target_powerpc::plt_off): Return proper section for static link. (Target_powerpc::symval_for_branch): Make public. (Target_powerpc::make_lplt_section): Add Symbol_table* param. Adjust all calls. (Target_powerpc::make_local_plt_entry): Likewise. (Target_powerpc::make_local_plt_entry): New variant for global syms. (Powerpc_relobj::do_relocate_sections): Don't write lplt contents. (Output_data_plt_powerpc::do_write): Write lplt contents here. (Output_data_plt_powerpc::Output_data_plt_powerpc): Save symbol table pointer. Adjust all uses. (Output_data_plt_powerpc::add_entry): Add stash parameter. Don't do dynamic reloc handling when no reloc section. Save symbol for local plt entries. (Output_data_plt_powerpc::add_local_entry): Save symbol. (Output_data_plt_powerpc::Local_plt_ent): New class. (Output_data_plt_powerpc::sym_ents_): New vector. (Target_powerpc::Scan::get_reference_flags): Return FUNCTION_CALL|RELATIVE_REF for inline plt relocs. (Target_powerpc::Scan::global): Make entries in lplt for inline plt call relocation symbols. (Target_powerpc::Relocate::relocate): Rename has_plt_offset to use_plt_offset. Set use_plt_offset for inline plt relocs. 2021-12-06 Clément Chigot ld: improve shared tests for AIX It's now possible to refer symbols in the main program from the shared library. However, it still impossible to have the same overriden features between shared objects and mains than ELF, without using the runtime linking feature which isn't yet fully available. ld/ChangeLog: * testsuite/ld-shared/shared.exp: Improve XCOFF support * testsuite/ld-shared/main.c: Likewise. * testsuite/ld-shared/sh1.c: Likewise. * testsuite/ld-shared/xcoff.dat: Likewise. 2021-12-06 GDB Administrator Automatic date update in version.in 2021-12-05 Tom Tromey Preserve artificial CU name in process_psymtab_comp_unit_reader This fixes a use-after-free that Simon pointed out. process_psymtab_comp_unit_reader was allocating an artificial name for a CU, and then discarding it. However, this name was preserved in the cached file_and_directory. This patch arranges for the allocated name to be preserved there. 2021-12-05 Mike Frysinger sim: include ansidecl.h when needed Avoid implicit include deps with this to help untangle sim headers so we can get rid of arch-specific sim-main.h. sim: include stdint.h when needed Avoid implicit include deps with this to help untangle sim headers so we can get rid of arch-specific sim-main.h. sim: include stdarg.h when used Avoid implicit include deps with this to help untangle sim headers so we can get rid of arch-specific sim-main.h. 2021-12-05 Mike Frysinger sim: reorder header includes We're including system headers after local headers in a bunch of places, but this leads to conflicts when our local headers happen to define symbols that show up in the system headers. Use the more standard order of: * config.h (via defs.h) * system headers * local library headers (e.g. bfd & libiberty) * sim specific headers 2021-12-05 Simon Marchi gdbsupport: fix memory leak in create_file_handler when re-using file handler ASan made me notice a memory leak, where the memory tied to the file handle name string wasn't freed. When register a file handler with an fd that is already registered, we re-use the file_handler object, so we ended up creating a new std::string object and overwriting the file_handler::name pointer, without free-ing the old std::string. Fix this by allocating file_handler with new, deleting it with delete, and making file_handler::name not a pointer. Change-Id: Ie304cc78ab5ae5dfad9a1366e9890c09de651f43 2021-12-05 GDB Administrator Automatic date update in version.in 2021-12-04 Mike Frysinger sim: moxie: hoist dtb rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. sim: m68hc11: delete unused profile flags These were moved to the common configure script a while ago and have the same default as these, so just delete it. sim: msp430: delete redundant comments & settings These were copied from the example docs, so aren't adding any value. sim: erc32: drop old configure target There is no configure script in here anymore to regenerate. sim: m32c/rl78: drop redundant -Wall settings We already turn these on in the configure script. 2021-12-04 Tom Tromey Cache the result of find_file_and_directory This changes the DWARF reader to cache the result of find_file_and_directory. This is not especially important now, but it will help the new DWARF indexer. Move file_and_directory to new file and C++-ize This moves file_and_directory to a new file, and then C++-izes it -- replacing direct assignments with methods, and arranging for it to own any string that must be computed. Finally, the CU's objfile will only be used on demand; this is an important property for the new DWARF indexer's parallel mode. Remove Irix case from find_file_and_directory find_file_and_directory has a special case for the Irix 6.2 compiler. Since this is long obsolete, this patch removes it. 2021-12-04 Mike Frysinger sim: frv: split up testsuite a bit Running frv's allinsn in serial is quite slow due to the sheer number of tests it contains. By splitting it up and running in parallel, the execution time on my system goes from ~100sec to ~60sec. 2021-12-04 Simon Marchi gdb: don't show deprecated aliases I don't think it's very useful to show deprecated aliases to the user. It encourages the user to use them, when the goal is the opposite. For example, before: (gdb) help set index-cache enabled set index-cache enabled, set index-cache off, set index-cache on alias set index-cache off = set index-cache enabled off alias set index-cache on = set index-cache enabled on Enable the index cache. When on, enable the use of the index cache. (gdb) help set index-cache on Warning: 'set index-cache on', an alias for the command 'set index-cache enabled', is deprecated. Use 'set index-cache enabled on'. set index-cache enabled, set index-cache off, set index-cache on alias set index-cache off = set index-cache enabled off alias set index-cache on = set index-cache enabled on Enable the index cache. When on, enable the use of the index cache. After: (gdb) help set index-cache enabled Enable the index cache. When on, enable the use of the index cache. (gdb) help set index-cache on Warning: 'set index-cache on', an alias for the command 'set index-cache enabled', is deprecated. Use 'set index-cache enabled on'. Enable the index cache. When on, enable the use of the index cache. Change-Id: I989b618a5ad96ba975367e9d16db95523cd57a4c 2021-12-04 Simon Marchi gdb/testsuite: fix two "maint info line-table"-related tests Commit 92228a334ba2 ("gdb: small "maintenance info line-table" readability improvements") change the output format of "maint info line-table" slightly, adding some empty lines between each line-table. This causes two tests to start failing, update them to account for those empty lines. Change-Id: I9d33a58fce3e860ba0554b25f5582e8066a5c519 2021-12-04 Simon Marchi gdb: revert one array_view copy change in ada-lang.c Commit 4bce7cdaf481 ("gdbsupport: add array_view copy function") caused an internal error when running gdb.ada/packed_array_assign.exp: print pra(1) := pr^M /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/array-view.h:217: internal-error: copy: Assertion `dest.size () == src.size ()' failed.^M I am not sure what's the root cause of this, whether it is a GDB bug exposed by using the array_view copy function or not. Back out the change that triggers the internal error for now, while we investigate it. Change-Id: I055ab14143e4cfd3ca7ce8f4855c6c3c05db52a7 2021-12-04 Mike Frysinger bfd: unify header generation rules The logic between these rules are extremely similar, so unify them into a single variable. 2021-12-04 Mike Frysinger bfd: move header updates up a directory The rules for rebuilding the bfd headers live in the doc/ subdir (most likely) because they rely on the chew & related tools. But we can collapse them into the main Makefile while keeping the tools in the doc subdir easily enough. This makes the code simpler and allows for rebuilding them in parallel. Also add automake silent rule support while we're here. 2021-12-04 Mike Frysinger bfd: convert bfdver.h to silent automake rules 2021-12-04 GDB Administrator Automatic date update in version.in 2021-12-03 Simon Marchi gdb: small "maintenance info line-table" readability improvements - separate each entry with a newline, to visually separate them - style filenames with the filename style - print the name of the compunit_symtab A header now looks like this, with the compunit_symtab name added (and the coloring, but you can't really see it here): objfile: /home/simark/build/babeltrace/src/cli/.libs/babeltrace2 ((struct objfile *) 0x613000005980) compunit_symtab: babeltrace2-cfg-cli-args.c ((struct compunit_symtab *) 0x62100da1ed10) symtab: /usr/include/glib-2.0/glib/gdatetime.h ((struct symtab *) 0x62100d9ee530) linetable: ((struct linetable *) 0x0): Change-Id: Idc23e10aaa66e2e692adb0a6a74144f72c4fa1c7 2021-12-03 Simon Marchi gdb: change some alias functions parameters to const-reference Now that we use intrusive list to link aliases, it becomes easier to pass cmd_list_element arguments by const-reference rather than by pointer to some functions, change a few. Change-Id: Id0df648ed26e9447da0671fc2c858981cda31df8 2021-12-03 Simon Marchi gdb: use intrusive_list for cmd_list_element aliases list Change the manually-implemented linked list to use intrusive_list. This is not strictly necessary, but it makes the code much simpler. Change-Id: Idd08090ebf2db8bdcf68e85ef72a9635f1584ccc 2021-12-03 Simon Marchi gdb: trivial changes to use array_view Change a few relatively obvious spots using value contents to propagate the use array_view a bit more. Change-Id: I5338a60986f06d5969fec803d04f8423c9288a15 2021-12-03 Simon Marchi gdb: make extract_integer take an array_view I think it would make sense for extract_integer, extract_signed_integer and extract_unsigned_integer to take an array_view. This way, when we extract an integer, we can validate that we don't overflow the buffer passed by the caller (e.g. ask to extract a 4-byte integer but pass a 2-byte buffer). - Change extract_integer to take an array_view - Add overloads of extract_signed_integer and extract_unsigned_integer that take array_views. Keep the existing versions so we don't need to change all callers, but make them call the array_view versions. This shortens some places like: result = extract_unsigned_integer (value_contents (result_val).data (), TYPE_LENGTH (value_type (result_val)), byte_order); into result = extract_unsigned_integer (value_contents (result_val), byte_order); value_contents returns an array view that is of length `TYPE_LENGTH (value_type (result_val))` already, so the length is implicitly communicated through the array view. Change-Id: Ic1c1f98c88d5c17a8486393af316f982604d6c95 2021-12-03 Simon Marchi gdbsupport: add array_view copy function An assertion was recently added to array_view::operator[] to ensure we don't do out of bounds accesses. However, when the array_view is copied to or from using memcpy, it bypasses that safety. To address this, add a `copy` free function that copies data from an array view to another, ensuring that the destination and source array views have the same size. When copying to or from parts of an array_view, we are expected to use gdb::array_view::slice, which does its own bounds check. With all that, any copy operation that goes out of bounds should be caught by an assertion at runtime. copy is implemented using std::copy and std::copy_backward, which, at least on libstdc++, appears to pick memmove when copying trivial data. So in the end there shouldn't be much difference vs using a bare memcpy, as we do right now. When copying non-trivial data, std::copy and std::copy_backward assigns each element in a loop. To properly support overlapping ranges, we must use std::copy or std::copy_backward, depending on whether the destination is before the source or vice-versa. std::copy and std::copy_backward don't support copying exactly overlapping ranges (where the source range is equal to the destination range). But in this case, no copy is needed anyway, so we do nothing. The order of parameters of the new copy function is based on std::copy and std::copy_backward, where the source comes before the destination. Change a few randomly selected spots to use the new function, to show how it can be used. Add a test for the new function, testing both with arrays of a trivial type (int) and of a non-trivial type (foo). Test non-overlapping ranges as well as three kinds of overlapping ranges: source before dest, dest before source, and dest == source. Change-Id: Ibeaca04e0028410fd44ce82f72e60058d6230a03 2021-12-03 Simon Marchi gdb: change store_waitstatus to return a target_waitstatus by value store_waitstatus is basically a translation function between a status integer and an equivalent target_waitstatus object. It would make sense for it to take the integer as a parameter and return the target_waitstatus by value. Do that, and rename to host_status_to_waitstatus. Users can then do: ws = host_status_to_waitstatus (status) which does the right thing, given the move constructor of target_waitstatus. Change-Id: I7a07d59d3dc19d3ed66929642f82f44f3e85d61b 2021-12-03 Simon Marchi gdb: return *this in target_waitstatus setters While playing with some code creating target_waitstatus objects, I was mildly annoyed by the fact that we can't just return a new target_waitstatus object. We have to do: target_waitstatus ws; ws.set_exited (123); return ws; Make the setters return the "this" object as a reference, such that it's possible to do: return target_waitstatus ().set_exited (123); I initially thought of adding static creation functions, which you would use like: return target_waitstatus::make_exited (123); However, making the setters return a reference to the object achieves pretty much the same thing, with less new code. Change-Id: I45159b7f9fcd9db5b20603480e323020b14ed147 2021-12-03 Simon Marchi gdb: make saved_filename an std::string Make this variable an std::string, avoiding manual memory management. Change-Id: Ie7a8d7381449ab9c4dfc4cb8b99e63b9ffa8f947 2021-12-03 Richard Sandiford aarch64: Fix uninitialised memory AARCH64_OPDE_EXPECTED_A_AFTER_B and AARCH64_OPDE_A_SHOULD_FOLLOW_B are not paired with an error string, but we had an assert that the error was nonnull. Previously this assert was testing uninitialised memory and so could pass or fail arbitrarily. opcodes/ * aarch64-opc.c (verify_mops_pme_sequence): Initialize the error field to null for AARCH64_OPDE_EXPECTED_A_AFTER_B and AARCH64_OPDE_A_SHOULD_FOLLOW_B. * aarch64-dis.c (print_verifier_notes): Move assert. 2021-12-03 Andrew Burgess gdb: make value_subscripted_rvalue static The function value_subscripted_rvalue is only used in valarith.c, so lets make it a static function. There should be no user visible change after this commit. 2021-12-03 Andrew Burgess gdb/testsuite: give a test a real name A test in gdb.python/py-send-packet.exp added in this commit: commit 24b2de7b776f8f23788d855b1eec290c6e208821 Date: Tue Aug 31 14:04:36 2021 +0100 gdb/python: add gdb.RemoteTargetConnection.send_packet included a large amount of binary data in the command sent to GDB. As this test didn't have a real test name the binary data was included in the gdb.sum file. The contents of the binary data could change between different runs of GDB, and this makes comparing results harder. This commit gives the test a real test name. 2021-12-03 Andrew Burgess gdb/remote: fix use after free bug This commit: commit 288712bbaca36bff6578bc839ebcdc3707662f81 Date: Mon Nov 22 15:16:27 2021 +0000 gdb/remote: use scoped_restore to control starting_up flag introduced a use after free bug. The scoped restore added in the above commit resets a flag within a remote_target's remote_state object. However, in some situations, the remote_target can be unpushed before the error is thrown. If the only reference to the target is the one in the target stack, then unpushing the target will cause the remote_target to be deleted, which, in turn, will delete the remote_state object. The scoped restore will then try to reset the flag within a deleted object. This problem was caught in the gdb.server/server-connect.exp test, which, when run with the address sanitizer enabled, highlights the write after free bug described above. This commit resolves this issue by adding a new class specifically for the purpose of managing the starting_up flag. As well as setting, and then clearing the starting_up flag, this new class increments, and then decrements the reference count on the remote_target object. This prevents the remote_target from being deleted until after the flag has been reset. The gdb.server/server-connect.exp now runs cleanly with the address sanitizer enabled. 2021-12-03 Mike Frysinger libctf: workaround automake bug with conditional info pages It looks like automake makes assumptions about its ability to build info pages based on the GNU standard behavior of shipping info pages with the distributions. So even though the info pages were conditionalized, and automake disabled some of the targets, it was still creeping in by way of unconditional INFO_DEPS settings. We can workaround this by adding a stub target for the info page when building info pages are disabled. This tricks automake into disabling its own extended generation target. I'll follow up with the automake folks to see what they think. 2021-12-03 Chenghua Xu Add myself and Zhensong Liu as the LoongArch port maintainer. 2021-12-03 Alan Modra Revert "Re: Don't compile some opcodes files when bfd is 32-bit only" This reverts commit 7a53275579e7cec9389ccb924f5ecf69e8d89d41. The bpf sim doesn't work with a 32-bit bfd after all. 2021-12-03 GDB Administrator Automatic date update in version.in 2021-12-02 Simon Marchi gdb: remove unexpected xstrdup in _initialize_maint_test_settings That xstrdup is not correct, since we are assigning an std::string. The result of xstrdup is used to initialize the string, and then lost forever. Remove it. Change-Id: Ief7771055e4bfd643ef3b285ec9fb7b1bfd14335 2021-12-02 Nick Clifton Fix illegal memory access whilst parsing corrupt DWARF debug information. PR 28645 * dwarf.c (process_cu_tu_index): Add test for overruning section whilst processing slots. 2021-12-02 Tom de Vries [gdb/tdep] Fix avx512 -m32 support in gdbserver PR27257 reports a problem that can be reproduced as follows: - use x86_64 machine with avx512 support - compile a hello world with -m32 to a.out - start a gdbserver session with a.out - use gdb to connect to the gdbserver session This makes us run into: ... Listening on port 2346 Remote debugging from host ::1, port 34940 src/gdbserver/regcache.cc:257: \ A problem internal to GDBserver has been detected. Unknown register zmm16h requested ... The problem is that i387_xsave_to_cache in gdbserver/i387-fp.cc can't find a register zmm16h in the register cache. To understand how this happens, first some background. SSE has 16 128-bit wide xmm registers. AVX extends the SSE registers set as follows: - it extends the 16 existing 128-bit wide xmm registers to 256-bit wide ymm registers. AVX512 extends the AVX register set as follows: - it extends the 16 existing 256-bit wide ymm registers to 512-bit wide zmm registers. - it adds 16 additional 512-bit wide zmm registers (with corresponding ymm and xmm subregisters added as well) However, in 32-bit mode, there are only 8 xmm/ymm/zmm registers. The problem we're running into is that gdbserver/i387-fp.cc uses these constants to describe the size of the register file: ... static const int num_avx512_zmmh_low_registers = 16; static const int num_avx512_zmmh_high_registers = 16; static const int num_avx512_ymmh_registers = 16; static const int num_avx512_xmm_registers = 16; ... which are all incorrect for the 32-bit case. Fix this by replacing the constants with variables that have the appropriate values in 64-bit and 32-bit mode. Tested on x86_64-linux with native and unix/-m32. 2021-12-02 Simon Marchi gdb/testsuite: update tests looking for "DWARF 2" debug format Commit ab557072b8ec ("gdb: use actual DWARF version in compunit's debugformat field") changes the debug format string in "info source" to show the actual DWARF version, rather than always show "DWARF 2". However, it failed to consider that some tests checked for the "DWARF 2" string to see if the test program is compiled with DWARF debug information. Since everything is compiled with DWARF 4 or 5 nowadays, that changed the behavior of those tests. Notably, it prevent the tests using skip_inline_var_tests to run. Grep through the testsuite for "DWARF 2" and change all occurrences I could find to use "DWARF [0-9]" instead (that string is passed to TCL's string match). Change-Id: Ic7fb0217fb9623880c6f155da6becba0f567a885 2021-12-02 Joel Brobecker (PPC64) fix handling of fixed-point values when using "return" command In the gdb.ada/fixed_points_function.exp testcase, we have the following Ada code... type FP1_Type is delta 0.1 range -1.0 .. +1.0; -- Ordinary function Call_FP1 (F : FP1_Type) return FP1_Type is begin FP1_Arg := F; return FP1_Arg; end Call_FP1; ... used as follow: F1 : FP1_Type := 1.0; F1 := Call_FP1 (F1); The testcase, among other things, verifies that "return" works properly as follow: | (gdb) return 1.0 | Make pck.call_fp1 return now? (y or n) y | [...] | 9 F1 := Call_FP1 (F1); | (gdb) next | (gdb) print f1 | $1 = 0.0625 The output of the last command shows that we returned the wrong value. The value printed gives a clue about the problem, since it is 1/16th of the value we expected, where 1/16 is FP1_Type's scaling factor. The problem, here, comes from the fact that the function handling return values for base types (ppc64_sysv_abi_return_value_base) writes the return value using unpack_long which, upon seeing that the value being unpacked is a fixed point type, applies the scaling factor, to get the integer-representation of our fixed-point value (similar to what it does with floats, for instance). So, the fix consists in teaching ppc64_sysv_abi_return_value_base about fixed-point types, and to avoid the unwanted application of the scaling factor. Note that the "finish" function, on the other hand, does not suffer from this issue, simply becaue the value returned by the function is read from register without the use of a type, thus avoiding an unwanted application of a scaling factor. No test added, as this change is already tested by gdb.ada/fixed_points_function.exp. Co-Authored-By: Tristan Gingold 2021-12-02 Joel Brobecker (RISCV) fix handling of fixed-point type return values This commit adds support for TYPE_CODE_FIXED_POINT types for "finish" and "return" commands. Consider the following Ada code... type FP1_Type is delta 0.1 range -1.0 .. +1.0; -- Ordinary function Call_FP1 (F : FP1_Type) return FP1_Type is begin FP1_Arg := F; return FP1_Arg; end Call_FP1; ... used as follow: F1 : FP1_Type := 1.0; F1 := Call_FP1 (F1); "finish" currently behaves as follow: | (gdb) finish | [...] | Value returned is $1 = 0 We expect the returned value to be "1". Similarly, "return" makes the function return the wrong value: | (gdb) return 1.0 | Make pck.call_fp1 return now? (y or n) y | [...] | 9 F1 := Call_FP1 (F1); | (gdb) next | (gdb) print f1 | $1 = 0.0625 (we expect it to print "1" instead). This problem comes from the handling of integral return values when the return value is actually fixed point type. Our type here is actually a range of a fixed point type, but the same principles should also apply to pure fixed-point types. For the record, here is what the debugging info looks like: <1><238>: Abbrev Number: 2 (DW_TAG_subrange_type) <239> DW_AT_lower_bound : -16 <23a> DW_AT_upper_bound : 16 <23b> DW_AT_name : pck__fp1_type <23f> DW_AT_type : <0x248> <1><248>: Abbrev Number: 4 (DW_TAG_base_type) <249> DW_AT_byte_size : 1 <24a> DW_AT_encoding : 13 (signed_fixed) <24b> DW_AT_binary_scale: -4 <24c> DW_AT_name : pck__Tfp1_typeB <250> DW_AT_artificial : 1 ... where the scaling factor is 1/16. Looking at the "finish" command, what happens is that riscv_arg_location determines that our return value should be returned by parameter using an integral convention (via builtin type long). And then, riscv_return_value uses a cast to that builtin type long to store the value of into a buffer with the right register size. This doesn't work in our case, because the underlying value returned by the function is unscaled, which means it is 16, and thus the cast is like doing: arg_val = (FP1_Type) 16 ... In other words, it is trying to create an FP1_Type enty whose value is 16. Applying the scaling factor, that's 256, and because the size of FP1_Type is 1 byte, we overflow and thus it ends up being zero. The same happen with the "return" function, but the other way around. The fix consists in handling fixed-point types separately from integral types. 2021-12-02 Joel Brobecker (ARM/fixed-point) wrong value shown by "finish" command: Consider the following Ada code: type FP1_Type is delta 0.1 range -1.0 .. +1.0; -- Ordinary FP1_Arg : FP1_Type := 0.0; function Call_FP1 (F : FP1_Type) return FP1_Type is begin FP1_Arg := F; return FP1_Arg; end Call_FP1; After having stopped inside function Call_FP1 as follow: Breakpoint 1, pck.call_fp1 (f=1) at /[...]/pck.adb:5 5 FP1_Arg := F; Returning from that function call using "finish" should show that the function return "1.0" (the same value as was passed as an argument). However, this is not the case: (gdb) finish Run till exit from #0 pck.call_fp1 (f=1) [...] 9 F1 := Call_FP1 (F1); Value returned is $1 = 0 This patch enhances the extraction of the return value to know about fixed point types. 2021-12-02 Xavier Roirand (Ada/AArch64) fix fixed point argument passing in inferior funcall Consider the following code: type FP1_Type is delta 0.1 range -1.0 .. +1.0; -- Ordinary function Call_FP1 (F : FP1_Type) return FP1_Type is begin return F; end Call_FP1; When the default in GCC is to generate proper DWARF info for fixed point types, then in gdb, printing the result of a call to call_fp1 with a decimal parameter leads to: (gdb) p call_fp1(0.5) $1 = 0 The displayed value is wrong, and we actually expected: (gdb) p call_fp1(0.5) $1 = 0.5 What happened is that our fixed point type parameter got promoted to a 32bit integer because we detected that the length of that object was less than 4 bytes. The compiler does not perform this promotion and therefore GDB should not either. This patch fixes the behavior described above. 2021-12-02 Tom Tromey Implement 'task apply' This adds a 'task apply' command, which is the Ada tasking analogue of 'thread apply'. Unlike 'thread apply', it doesn't offer the 'ascending' flag; but otherwise it's essentially the same. Add "task" keyword to the "watch" command Breakpoints in gdb can be made specific to an Ada task using the "task" qualifier. This patch applies this same idea to watchpoints. 2021-12-02 Richard Sandiford aarch64: Update gas/NEWS for recent changes gas/ * NEWS: Mention support for Armv8.8-A and for new system registers. 2021-12-02 Richard Sandiford aarch64: Add BC instruction This patch adds support for the Armv8.8-A BC instruction. [https://developer.arm.com/documentation/ddi0596/2021-09/Base-Instructions/BC-cond--Branch-Consistent-conditionally-?lang=en] include/ * opcode/aarch64.h (AARCH64_FEATURE_HBC): New macro. (AARCH64_ARCH_V8_8): Make armv8.8-a imply AARCH64_FEATURE_HBC. opcodes/ * aarch64-tbl.h (aarch64_feature_hbc): New variable. (HBC, HBC_INSN): New macros. (aarch64_opcode_table): Add BC.C. * aarch64-dis-2.c: Regenerate. gas/ * doc/c-aarch64.texi: Document +hbc. * config/tc-aarch64.c (aarch64_features): Add "hbc". * testsuite/gas/aarch64/hbc.s, testsuite/gas/aarch64/hbc.d: New test. * testsuite/gas/aarch64/hbc-invalid.s, testsuite/gas/aarch64/hbc-invalid.l, testsuite/gas/aarch64/hbc-invalid.d: New test. 2021-12-02 Richard Sandiford aarch64: Enforce P/M/E order for MOPS instructions The MOPS instructions should be used as a triple, such as: cpyfp [x0]!, [x1]!, x2! cpyfm [x0]!, [x1]!, x2! cpyfe [x0]!, [x1]!, x2! The registers should also be the same for each writeback operand. This patch adds a warning for code that doesn't follow this rule, along similar lines to the warning that we already emit for invalid uses of MOVPRFX. include/ * opcode/aarch64.h (C_SCAN_MOPS_P, C_SCAN_MOPS_M, C_SCAN_MOPS_E) (C_SCAN_MOPS_PME): New macros. (AARCH64_OPDE_A_SHOULD_FOLLOW_B): New aarch64_operand_error_kind. (AARCH64_OPDE_EXPECTED_A_AFTER_B): Likewise. (aarch64_operand_error): Make each data value a union between an int and a string. opcodes/ * aarch64-tbl.h (MOPS_CPY_OP1_OP2_INSN): Add scan flags. (MOPS_SET_OP1_OP2_INSN): Likewise. * aarch64-opc.c (set_out_of_range_error): Update after change to aarch64_operand_error. (set_unaligned_error, set_reg_list_error): Likewise. (init_insn_sequence): Use a 3-instruction sequence for MOPS P instructions. (verify_mops_pme_sequence): New function. (verify_constraints): Call it. * aarch64-dis.c (print_verifier_notes): Handle AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B. gas/ * config/tc-aarch64.c (operand_mismatch_kind_names): Add entries for AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B. (operand_error_higher_severity_p): Check that AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B come between AARCH64_OPDE_RECOVERABLE and AARCH64_OPDE_SYNTAX_ERROR; their relative order is not significant. (record_operand_error_with_data): Update after change to aarch64_operand_error. (output_operand_error_record): Likewise. Handle AARCH64_OPDE_A_SHOULD_FOLLOW_B and AARCH64_OPDE_EXPECTED_A_AFTER_B. * testsuite/gas/aarch64/mops_invalid_2.s, testsuite/gas/aarch64/mops_invalid_2.d, testsuite/gas/aarch64/mops_invalid_2.l: New test. 2021-12-02 Richard Sandiford aarch64: Add support for +mops This patch adds support for FEAT_MOPS, an Armv8.8-A extension that provides memcpy and memset acceleration instructions. I took the perhaps controversial decision to generate the individual instruction forms using macros rather than list them out individually. This becomes useful with a follow-on patch to check that code follows the correct P/M/E sequence. [https://developer.arm.com/documentation/ddi0596/2021-09/Base-Instructions?lang=en] include/ * opcode/aarch64.h (AARCH64_FEATURE_MOPS): New macro. (AARCH64_ARCH_V8_8): Make armv8.8-a imply AARCH64_FEATURE_MOPS. (AARCH64_OPND_MOPS_ADDR_Rd): New aarch64_opnd. (AARCH64_OPND_MOPS_ADDR_Rs): Likewise. (AARCH64_OPND_MOPS_WB_Rn): Likewise. opcodes/ * aarch64-asm.h (ins_x0_to_x30): New inserter. * aarch64-asm.c (aarch64_ins_x0_to_x30): New function. * aarch64-dis.h (ext_x0_to_x30): New extractor. * aarch64-dis.c (aarch64_ext_x0_to_x30): New function. * aarch64-tbl.h (aarch64_feature_mops): New feature set. (aarch64_feature_mops_memtag): Likewise. (MOPS, MOPS_MEMTAG, MOPS_INSN, MOPS_MEMTAG_INSN) (MOPS_CPY_OP1_OP2_PME_INSN, MOPS_CPY_OP1_OP2_INSN, MOPS_CPY_OP1_INSN) (MOPS_CPY_INSN, MOPS_SET_OP1_OP2_PME_INSN, MOPS_SET_OP1_OP2_INSN) (MOPS_SET_INSN): New macros. (aarch64_opcode_table): Add MOPS instructions. (aarch64_opcode_table): Add entries for AARCH64_OPND_MOPS_ADDR_Rd, AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn. * aarch64-opc.c (aarch64_print_operand): Handle AARCH64_OPND_MOPS_ADDR_Rd, AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn. (verify_three_different_regs): New function. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. gas/ * doc/c-aarch64.texi: Document +mops. * config/tc-aarch64.c (parse_x0_to_x30): New function. (parse_operands): Handle AARCH64_OPND_MOPS_ADDR_Rd, AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn. (aarch64_features): Add "mops". * testsuite/gas/aarch64/mops.s, testsuite/gas/aarch64/mops.d: New test. * testsuite/gas/aarch64/mops_invalid.s, * testsuite/gas/aarch64/mops_invalid.d, * testsuite/gas/aarch64/mops_invalid.l: Likewise. 2021-12-02 Richard Sandiford aarch64: Add Armv8.8-A system registers Armv8.8-A defines two new system registers: allint and icc_nmiar1_el1. Both of them were previously unmapped. allint supports a 0/1 immediate. [https://developer.arm.com/documentation/ddi0595/2021-09/AArch64-Registers/ALLINT--All-Interrupt-Mask-Bit?lang=en] [https://developer.arm.com/documentation/ddi0595/2021-09/AArch64-Registers/ICC-NMIAR1-EL1--Interrupt-Controller-Non-maskable-Interrupt-Acknowledge-Register-1?lang=en] opcodes/ * aarch64-opc.c (SR_V8_8): New macro. (aarch64_sys_regs): Add allint and icc_nmiar1_el1. (aarch64_pstatefields): Add allint. gas/ * testsuite/gas/aarch64/armv8_8-a-sysregs.s, * testsuite/gas/aarch64/armv8_8-a-sysregs.d: New test. * testsuite/gas/aarch64/armv8_8-a-sysregs-invalid.s, * testsuite/gas/aarch64/armv8_8-a-sysregs-invalid.l, * testsuite/gas/aarch64/armv8_8-a-sysregs-invalid.d: New test. 2021-12-02 Richard Sandiford aarch64: Add id_aa64isar2_el1 Armv8.8-A defines a read-only system register called id_aa64isar2_el1. The register was previously RES0 and should therefore be accepted at all architecture levels. [https://developer.arm.com/documentation/ddi0595/2021-09/AArch64-Registers/ID-AA64ISAR2-EL1--AArch64-Instruction-Set-Attribute-Register-2?lang=en] opcodes/ * aarch64-opc.c (aarch64_sys_regs): Add id_aa64isar2_el1. gas/ * testsuite/gas/aarch64/sysreg-diagnostic.s: Test writes to id_aa64isar2_el1. * testsuite/gas/aarch64/sysreg-diagnostic.d: Update accordingly. * testsuite/gas/aarch64/sysreg-diagnostic.l: Likewise. * testsuite/gas/aarch64/sysreg.s: Test reads from id_aa64isar2_el1. * testsuite/gas/aarch64/sysreg.d: Update accordingly. 2021-12-02 Richard Sandiford aarch64: Add support for Armv8.8-A This patch adds skeleton support for -march=armv8.8-a, testing only that it correctly inherits from armv8.7-a. include/ * opcode/aarch64.h (AARCH64_FEATURE_V8_8): New macro. (AARCH64_ARCH_V8_8): Likewise. gas/ * doc/c-aarch64.texi: Document armv8.8-a. * config/tc-aarch64.c (aarch64_archs): Add armv8-8-a * testsuite/gas/aarch64/v8-8-a.s, * testsuite/gas/aarch64/v8-8-a.d: New test. 2021-12-02 Richard Sandiford aarch64: Provide line info for unclosed sequences We warn about MOVPRFX instructions that have no following instruction. This patch adds a line number to the message, which is useful if the assembly code has multiple text sections. The new code is unconditional since OBJ_ELF is always defined for aarch64. gas/ * config/tc-aarch64.h (aarch64_segment_info_type): Add last_file and last_line. * config/tc-aarch64.c (now_instr_sequence): Delete. (force_automatic_sequence_close): Provide a line number when reporting unclosed sequences. (md_assemble): Record the location of the instruction in tc_segment_info. * testsuite/gas/aarch64/sve-movprfx_4.l: Add line number to error message. * testsuite/gas/aarch64/sve-movprfx_7.l: Likewise. * testsuite/gas/aarch64/sve-movprfx_8.l: Likewise. 2021-12-02 Richard Sandiford aarch64: Tweak insn sequence code libopcodes has some code to check constraints across sequences of consecutive instructions. It was added to support MOVPRFX sequences but is going to be useful for the Armv8.8-A MOPS feature as well. Currently the structure has one field to record the instruction that started a sequence and another to record the remaining instructions in the sequence. It's more convenient for the MOPS code if we put the instructions into a single array instead. No functional change intended. include/ * opcode/aarch64.h (aarch64_instr_sequence): Replace num_insns and current_insns with num_added_insns and num_allocated_insns. opcodes/ * aarch64-opc.c (add_insn_to_sequence): New function. (init_insn_sequence): Update for new aarch64_instr_sequence layout. Add the first instruction to the inst array. (verify_constraints): Update for new aarch64_instr_sequence layout. Don't add the last instruction to the array. 2021-12-02 Richard Sandiford aarch64: Add maximum immediate value to aarch64_sys_reg The immediate form of MSR has a 4-bit immediate field (in CRm). However, many forms of MSR require a smaller immediate. These cases are identified by value in operand_general_constraint_met_p, but they're now the common case rather than the exception. This patch therefore adds the maximum value to the sys_reg description and gets the range from there. It also enforces the minimum of 0, which avoids a situation in which: msr dit, #2 would give the expected: Error: immediate value out of range 0 to 1 whereas: msr dit, #-1 would give: Error: immediate value out of range 0 to 15 (from the later UIMM4 checking). Also: - we were reporting the first error above against the wrong operand - TCO takes a single-bit immediate, but we previously allowed all 16 values. [https://developer.arm.com/documentation/ddi0596/2021-09/Base-Instructions/MSR--immediate---Move-immediate-value-to-Special-Register-?lang=en] opcodes/ * aarch64-opc.h (F_REG_MAX_VALUE, F_GET_REG_MAX_VALUE): New macros. * aarch64-opc.c (operand_general_constraint_met_p): Read the maximum MSR immediate value from aarch64_pstatefields. (aarch64_pstatefields): Add the maximum immediate value for each register. gas/ * testsuite/gas/aarch64/sysreg-4.s: Use an immediate value of 1 rather than 8 for the TCO test. * testsuite/gas/aarch64/sysreg-4.d: Update accordingly. * testsuite/gas/aarch64/armv8_2-a-illegal.l: Fix operand number in MSR immediate error messages. * testsuite/gas/aarch64/diagnostic.l: Likewise. * testsuite/gas/aarch64/pan-illegal.l: Likewise. * testsuite/gas/aarch64/ssbs-illegal1.l: Likewise. * testsuite/gas/aarch64/illegal-sysreg-4b.s, * testsuite/gas/aarch64/illegal-sysreg-4b.d, * testsuite/gas/aarch64/illegal-sysreg-4b.l: New test. 2021-12-02 Marcus Nilsson Allow the --visualize-jumps feature to work with the AVR disassembler. * avr-dis.c (avr_operand); Pass in disassemble_info and fill in insn_type on branching instructions. 2021-12-02 Simon Marchi gdb, include: replace pragmas with DIAGNOSTIC macros, fix build with g++ 4.8 When introducing this code, I forgot that we had some macros for this. Replace some "manual" pragma diagnostic with some DIAGNOSTIC_* macros, provided by include/diagnostics.h. In diagnostics.h: - Add DIAGNOSTIC_ERROR, to enable a diagnostic at error level. - Add DIAGNOSTIC_ERROR_SWITCH, to enable -Wswitch at error level, for both gcc and clang. Additionally, using DIAGNOSTIC_PUSH, DIAGNOSTIC_ERROR_SWITCH and DIAGNOSTIC_POP seems to misbehave with g++ 4.8, where we see these errors: CXX ada-tasks.o /home/smarchi/src/binutils-gdb/gdb/ada-tasks.c: In function void read_known_tasks(): /home/smarchi/src/binutils-gdb/gdb/ada-tasks.c:998:10: error: enumeration value ADA_TASKS_UNKNOWN not handled in switch [-Werror=switch] switch (data->known_tasks_kind) ^ Because of the POP, the diagnostic should go back to being disabled, since it was disabled in the beginning, but that's not what we see here. Versions of GCC >= 5 compile correctly. Work around this by making DIAGNOSTIC_ERROR_SWITCH a no-op for GCC < 5. Note that this code (already as it exists in master today) enables -Wswitch at the error level even if --disable-werror is passed. It shouldn't be a problem, as it's not like a new enumerator will appear out of nowhere and cause a build error if building with future compilers. Still, for correctness, we would ideally want to ask the compiler to enable -Wswitch at its default level (as if the user had passed -Wswitch on the command-line). There doesn't seem to be a way to do this. Change-Id: Id33ebec3de39bd449409ea0bab59831289ffe82d 2021-12-02 Simon Marchi gas: re-generate configure When configuring gas, I get: config.status: error: cannot find input file: `doc/Makefile.in' This is because configure is out-of-date, re-generate it. Change-Id: Iaa5980c282900d9fd23b90f0df25bf8ba3676498 2021-12-02 Simon Marchi libctf: re-generate configure When configuring libctf, I get: config.status: error: cannot find input file: `doc/Makefile.in' This is because configure is out-of-date, re-generate it. Change-Id: Ie69acd33012211a4620661582c7d24ad6d2cd169 2021-12-02 H.J. Lu x86: Skip __[start|stop]_SECNAME for --gc-sections -z start-stop-gc Don't convert memory load to immediate load on __start_SECNAME and __stop_SECNAME for --gc-sections -z start-stop-gc if all SECNAME sections been garbage collected. bfd/ PR ld/27491 * elf32-i386.c (elf_i386_convert_load_reloc): Skip __start_SECNAME and __stop_SECNAME for --gc-sections -z start-stop-gc if the input section been garbage collected. * elf64-x86-64.c (elf_x86_64_convert_load_reloc): Likewise. * elfxx-x86.h (elf_x86_start_stop_gc_p): New function. ld/ PR ld/27491 * testsuite/ld-i386/i386.exp: Run PR ld/27491 tests. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-i386/pr27491-1.s: New file. * testsuite/ld-i386/pr27491-1a.d: Likewise. * testsuite/ld-i386/pr27491-1b.d: Likewise. * testsuite/ld-i386/pr27491-1c.d: Likewise. * testsuite/ld-i386/pr27491-2.d: Likewise. * testsuite/ld-i386/pr27491-2.s: Likewise. * testsuite/ld-i386/pr27491-3.d: Likewise. * testsuite/ld-i386/pr27491-3.s: Likewise. * testsuite/ld-i386/pr27491-4.d: Likewise. * testsuite/ld-i386/pr27491-4a.s: Likewise. * testsuite/ld-i386/pr27491-4b.s: Likewise. * testsuite/ld-x86-64/pr27491-1.s: Likewise. * testsuite/ld-x86-64/pr27491-1a.d: Likewise. * testsuite/ld-x86-64/pr27491-1b.d: Likewise. * testsuite/ld-x86-64/pr27491-1c.d: Likewise. * testsuite/ld-x86-64/pr27491-2.d: Likewise. * testsuite/ld-x86-64/pr27491-2.s: Likewise. * testsuite/ld-x86-64/pr27491-3.d: Likewise. * testsuite/ld-x86-64/pr27491-3.s: Likewise. * testsuite/ld-x86-64/pr27491-4.d: Likewise. * testsuite/ld-x86-64/pr27491-4a.s: Likewise. * testsuite/ld-x86-64/pr27491-4b.s: Likewise. 2021-12-02 Mike Frysinger bfd: delete unused proto settings These have been around for decades but don't appear to be used, and trying to build them (e.g. `make archive.p archive.ip`) doesn't work, so just delete it all. gas: merge doc subdir up a level This avoids a recursive make into the doc subdir and speeds up the build slightly. It also allows for more parallelism. libctf: merge doc subdir up a level This avoids a recursive make into the doc subdir and speeds up the build slightly. It also allows for more parallelism. 2021-12-02 Simon Marchi gdb: use actual DWARF version in compunit's debugformat field The "info source" command, with a DWARF-compile program, always show that the debug info is "DWARF 2": (gdb) info source Current source file is test.c Compilation directory is /home/smarchi/build/binutils-gdb/gdb Located in /home/smarchi/build/binutils-gdb/gdb/test.c Contains 2 lines. Source language is c. Producer is GNU C17 9.3.0 -mtune=generic -march=x86-64 -g3 -gdwarf-5 -O0 -fasynchronous-unwind-tables -fstack-protector-strong -fstack-clash-protection -fcf-protection. Compiled with DWARF 2 debugging format. Includes preprocessor macro info. Change it to display the actual DWARF version: (gdb) info source Current source file is test.c Compilation directory is /home/smarchi/build/binutils-gdb/gdb Located in /home/smarchi/build/binutils-gdb/gdb/test.c Contains 2 lines. Source language is c. Producer is GNU C17 9.3.0 -mtune=generic -march=x86-64 -g3 -gdwarf-5 -O0 -fasynchronous-unwind-tables -fstack-protector-strong -fstack-clash-protection -fcf-protection. Compiled with DWARF 5 debugging format. Includes preprocessor macro info. The comp_unit_head::version field is guaranteed to be between 2 and 5, thanks to the check in read_comp_unit_head. So we can still use static strings to pass to record_debugformat, and keep it efficient. In the future, when somebody will update GDB to support DWARF 6, they'll hit this assert and have to update this code. Change-Id: I3270b7ebf5e9a17b4215405bd2e365662a4d6172 2021-12-02 H.J. Lu elf: Discard input .note.gnu.build-id sections 1. Discard input .note.gnu.build-id sections. 2. Clear the build ID field before writing. 3. Use bfd_make_section_anyway_with_flags to create the output .note.gnu.build-id section. PR ld/28639 * ldelf.c (ldelf_after_open): Discard input .note.gnu.build-id sections, excluding the first one. (write_build_id): Clear the build ID field before writing. (ldelf_setup_build_id): Use bfd_make_section_anyway_with_flags to create the output .note.gnu.build-id section. * testsuite/ld-elf/build-id.exp: New file. * testsuite/ld-elf/pr28639a.rd: Likewise. * testsuite/ld-elf/pr28639b.rd: Likewise. * testsuite/ld-elf/pr28639c.rd: Likewise. * testsuite/ld-elf/pr28639d.rd: Likewise. 2021-12-02 GDB Administrator Automatic date update in version.in 2021-12-01 Mike Frysinger binutils: add missing prefix for binutils/index.html rule 2021-12-01 Luca Boccassi readelf: recognize FDO Packaging Metadata ELF note. (Correcting snafu during patch application) 2021-12-01 Luca Boccassi readelf: recognize FDO Packaging Metadata ELF note As defined on: https://systemd.io/COREDUMP_PACKAGE_METADATA/ this note will be used starting from Fedora 36. Allow readelf --notes to pretty print it: Displaying notes found in: .note.package Owner Data size Description FDO 0x00000039 FDO_PACKAGING_METADATA Packaging Metadata: {"type":"deb","name":"fsverity-utils","version":"1.3-1"} 2021-12-01 Tom de Vries [gdb/testsuite] Fix typo in gdb.multi/multi-arch-exec.exp With gdb.multi/multi-arch-exec.exp I run into: ... Running src/gdb/testsuite/gdb.multi/multi-arch-exec.exp ... ERROR: tcl error sourcing src/gdb/testsuite/gdb.multi/multi-arch-exec.exp. ERROR: wrong # args: extra words after "else" clause in "if" command while executing "if [istarget "powerpc64*-*-*"] { set march "-m64" } else if [istarget "s390*-*-*"] { set march "-m31" } else { set march "-m32" }" ... Fix the else if -> elseif typo. Tested on x86_64-linux. 2021-12-01 Tom de Vries [gdb/testsuite] Fix gdb.arch/i386-pkru.exp on linux When running test-case gdb.arch/i386-pkru.exp on a machine with "Memory Protection Keys for Userspace" support, we run into: ... (gdb) PASS: gdb.arch/i386-pkru.exp: probe PKRU support print $pkru^M $2 = 1431655764^M (gdb) FAIL: gdb.arch/i386-pkru.exp: pkru register ... The test-case expects the $pkru register to have the default value 0, matching the "init state" of 0 defined by the XSAVE hardware. Since linux kernel version v4.9 containing commit acd547b29880 ("x86/pkeys: Default to a restrictive init PKRU"), the register is set to 0x55555554 by default (which matches the printed decimal value above). Fix the FAIL by accepting this value for linux. Tested on x86_64-linux. 2021-12-01 Nick Clifton Fix the fields in the x_n union inside the the x_file structure so that pointers can be stored. PR 28630 * coff/internal.h (x_n): Use bfd_hostptr_t for the fields in this structure. 2021-12-01 Andrew Burgess gdb/remote: use scoped_restore to control starting_up flag This commit makes use of a scoped_restore object to control the remote_state::starting_up flag within the remote_target::start_remote method. Ideally I would have liked to create the scoped_restore inside start_remote and just leave the restore in place until the end of the scope, however, I'm worried that doing this would change the behaviour of GDB. Specifically, in start_remote, the following code is executed once the starting_up flag has been restored to its previous value: if (breakpoints_should_be_inserted_now ()) insert_breakpoints (); I think (but am not 100% sure) that calling install_breakpoints could end up back inside remote_target::can_download_tracepoint, which does check the value of remote_state::starting_up. And so, I'm concerned that leaving the scoped_restore in place until the end of start_remote will cause a possible change in behaviour. To avoid this, and to leave things as close to the current behaviour as possible, I've split remote_target::start_remote into two, there's the main function body which moves into remote_target::start_remote_1, this function uses the scoped_restore to change the ::starting_up flag, then there's the old remote_target::start_remote, which now just calls ::start_remote_1, and then does the insert_breakpoints call. There should be no user visible changes after this commit, unless there's a situation where the ::starting_up flag could previously have been left set, if this was the case, then this situation should no longer be possible. 2021-12-01 Simon Marchi gdb.base/corefile-buildid.exp: fix DUPLICATEs when failing to generate a core file When my system isn't properly configured to generate core files in the local directory, I see these DUPLICATEs: DUPLICATE: gdb.base/corefile-buildid.exp: could not generate core file Fix that by having a single with_test_prefix around that message and what follows. Change-Id: I4ac245fcce1c666db56e3bad3582aa17f183dcba 2021-12-01 Mike Frysinger gold: enable silent build rules 2021-12-01 GDB Administrator Automatic date update in version.in 2021-11-30 Carl Love gdb: Powerpc fix gdb.multi/multi-arch-exec.exp test The expect file has a procedure append_arch_options which sets march based the istarget. The current if / else statement does not check for powerpc64. The else statement is hit which sets march to -m32. This results in compilation errors on 64-bit PowerPC. This patch adds an if statement to check for powerpc64 and if true sets mach to -m64. The patch was tested on a Power 10 system. No compile errors were generated. The test completes with 1 expected pass and no failures. 2021-11-30 Mike Frysinger binutils: regenerate Makefile.in after doc/ changes 2021-11-30 Roland McGrath Fix missing build dependency for binutils man pages binutils/ * doc/local.mk: Give each man page target its missing dependency on doc/$(am__dirstamp). 2021-11-30 Richard Sandiford aarch64: Add missing system registers [PR27145] This patch adds support for various system registers, up to Armv8.7-A. This includes all the registers that were mentioned in the PR and that hadn't become supported since. opcodes/ PR aarch64/27145 * aarch64-opc.c (SR_V8_4): Remove duplicate definition. (SR_V8_6, SR_V8_7, SR_GIC, SR_AMU): New macros. (aarch64_sys_regs): Add missing entries (up to Armv8.7-A). gas/ PR aarch64/27145 * testsuite/gas/aarch64/sysreg-8.s, * testsuite/gas/aarch64/sysreg-8.d, * testsuite/gas/aarch64/illegal-sysreg-8.s, * testsuite/gas/aarch64/illegal-sysreg-8.d, * testsuite/gas/aarch64/illegal-sysreg-8.l, * testsuite/gas/aarch64/illegal-sysreg-8b.s, * testsuite/gas/aarch64/illegal-sysreg-8b.d, * testsuite/gas/aarch64/illegal-sysreg-8b.l: New tests. * testsuite/gas/aarch64/sysreg.s: Change system register numbers to ones that are still unallocated. * testsuite/gas/aarch64/sysreg.d: Update accordingly. 2021-11-30 Richard Sandiford aarch64: Make LOR registers conditional on +lor We have a +lor feature flag for the Limited Ordering Regions extension, but the associated registers didn't use it. opcodes/ * aarch64-opc.c (SR_LOR): New macro. (aarch64_sys_regs): Use it for lorc_el1, lorea_el1, lorn_el1 and lorsa_el1. gas/ * testsuite/gas/aarch64/sysreg-7.s: Enable +lor. * testsuite/gas/aarch64/illegal-sysreg-7.s: Test for LOR registers without +lor. * testsuite/gas/aarch64/illegal-sysreg-7.d: Update accordingly. * testsuite/gas/aarch64/illegal-sysreg-7.l: Likewise. 2021-11-30 Richard Sandiford aarch64: Remove ZIDR_EL1 ZIDR_EL1 was part of an early version of SVE, but didn't make it to the final release. opcodes/ * aarch64-opc.c (aarch64_sys_regs): Remove zidr_el1 entry. gas/ * testsuite/gas/aarch64/sve-sysreg.s: Remove zidr_el1. * testsuite/gas/aarch64/sve-sysreg.d: Update accordingly. * testsuite/gas/aarch64/sve-sysreg-invalid.l: Likewise. 2021-11-30 Richard Sandiford aarch64: Allow writes to MFAR_EL3 MFAR_EL3 is a read/write register, but was incorrectly marked as read-only [https://developer.arm.com/documentation/ddi0601/2021-09/AArch64-Registers/MFAR-EL3--PA-Fault-Address-Register?lang=en] opcodes/ * aarch64-opc.c (aarch64_sys_regs): Mark mfar_el3 as read-write. gas/ * testsuite/gas/aarch64/rme.s: Test writing to mfar_el3. * testsuite/gas/aarch64/rme.d: Update accordingly. * testsuite/gas/aarch64/rme-invalid.s: Delete. * testsuite/gas/aarch64/rme-invalid.l: Likewise. * testsuite/gas/aarch64/rme-invalid.d: Likewise. 2021-11-30 Richard Sandiford aarch64: Mark PMSIDR_EL1 as read-only We were incorrectly allowing writes to PMSIDR_EL1, which is a read-only register. [https://developer.arm.com/documentation/ddi0595/2021-09/AArch64-Registers/PMSIDR-EL1--Sampling-Profiling-ID-Register?lang=en] opcodes/ * aarch64-opc.c (aarch64_sys_regs): Make pmsidr_el1 as F_REG_READ. gas/ * testsuite/gas/aarch64/msr.s: Remove write to pmsidr_el1. * testsuite/gas/aarch64/msr.d: Update accordingly. * testsuite/gas/aarch64/illegal-sysreg-2.s, * testsuite/gas/aarch64/illegal-sysreg-2.d, * testsuite/gas/aarch64/illegal-sysreg-2.l: New test. 2021-11-30 Richard Sandiford aarch64: Remove duplicate system register entries There is a lot of overlap between the ETM and ETE system registers, so some registers were listed twice. Already tested by etm.[sd] and ete.[sd]. opcodes/ * aarch64-opc.c (aarch64_sys_regs): Combine ETE and ETM blocks and remove redundant entries. gas/ * testsuite/gas/aarch64/etm.s: Remove duplicated test. * testsuite/gas/aarch64/etm.d: Update accordingly. 2021-11-30 Richard Sandiford aarch64: Check for register aliases before mnemonics Previously we would not accept: A .req B if A happened to be the name of an instruction. Adding new instructions could therefore invalidate existing register aliases. I noticed this with a test that used "zero" as a register alias for "xzr", where "zero" is now also the name of an SME instruction. I don't have any evidence that "real" code is doing this, but it seems at least plausible. This patch switches things so that we check for register aliases first. It might slow down parsing slightly, but the difference is unlikely to be noticeable. Things like: b .req + 0 still work, since create_register_alias checks for " .req ", and with the input scrubber, we'll only keep whitespace after .req if it's followed by another name. If there's some valid expression that I haven't thought about that is scrubbed to " .req ", users could avoid the ambiguity by wrapping .req in parentheses. The new test for invalid aliases already passed. I just wanted something to exercise the !dot condition. I can't find a way of exercising the (existing) p == base condition, but I'm not brave enough to say that it can never happen. If it does happen, get_mnemonic_name would return an empty string. gas/ * config/tc-aarch64.c (opcode_lookup): Move mnemonic extraction code to... (md_assemble): ...here. Check for register aliases first. * testsuite/gas/aarch64/register_aliases.d, testsuite/gas/aarch64/register_aliases.s: Test for a register alias called "zero". * testsuite/gas/aarch64/register_aliases_invalid.d, testsuite/gas/aarch64/register_aliases_invalid.l, testsuite/gas/aarch64/register_aliases_invalid.s: New test. 2021-11-30 Andrew Burgess gdb/python: don't use the 'p' format for parsing args When running the gdb.python/py-arch.exp tests on a GDB built against Python 2 I ran into some errors. The problem is that this test script exercises the gdb.Architecture.integer_type method, and this method uses 'p' as an argument format specifier in a call to gdb_PyArg_ParseTupleAndKeywords. Unfortunately this specified was only added in Python 3.3, so will cause an error for earlier versions of Python. This commit switches to use the 'O' specifier to collect a PyObject, and then uses PyObject_IsTrue to convert the object to a boolean. An earlier version of this patch incorrectly switched from using 'p' to use 'i', however, it was pointed out during review that this would cause some changes in behaviour, for example both of these will work with 'p', but not with 'i': gdb.selected_inferior().architecture().integer_type(32, None) gdb.selected_inferior().architecture().integer_type(32, "foo") The new approach of using 'O' works fine with these cases. I've added some new tests to cover both of the above. There should be no user visible changes after this commit. 2021-11-30 Tom de Vries [gdb/testsuite] Fix gdb.base/style.exp with stub-termcap When running test-case gdb.base/style.exp with a gdb build using stub-termcap.c, we run into: ... (gdb) PASS: gdb.base/style.exp: all styles enabled: frame when width=20 ^M Use dwarf_vma type for offsets, ranges and section sizes in DWARF decoder. * dwarf.c (find_debug_info_for_offset): Use dwarf_vma type for offsets, sizes and ranges. (display_loc_list): Likewise. Also use print_dwarf_vma to print the offset. (display_loclists_list): Likewise. (display_loc_list_dwo): Likewise. (display_debug_str): Likewise. (display_debug_aranges): Likewise. (display_debug_ranges_list): Likewise. (display_debug_rnglists_list): Likewise. (display_debug_ranges): Likewise. ld: pru: Add pru_irq_map output section * scripttempl/pru.sc (.pru_irq_map): Define output section. * testsuite/ld-pru/pru_irq_map-1.d: New test. * testsuite/ld-pru/pru_irq_map-2.d: New test. * testsuite/ld-pru/pru_irq_map.s: New test. 2021-11-30 Andrew Burgess gdb/testsuite: check the python module is available before using it The gdb.python/py-inferior-leak.exp test makes use of the tracemalloc module. When running the Python tests with a GDB built against Python 2 I ran into a test failure due to the tracemalloc module not being available. This commit adds a new helper function to lib/gdb-python.exp that checks if a named module is available. Using this we can then skip the py-inferior-leak.exp test when the tracemalloc module is not available. 2021-11-30 Andrew Burgess gdb: fix disassembler regressions for 32-bit arm After this commit: commit 76b43c9b5c2b275cbf4f927bfc25984410cb5dd5 Date: Tue Oct 5 15:10:12 2021 +0100 gdb: improve error reporting from the disassembler We started seeing FAILs in the gdb.base/all-architectures*.exp tests, when running on a 32-bit ARM target, though I suspect running on any target that compiles such that bfd_vma is 32-bits would also trigger the failures. The problem is that the test is expected GDB's disassembler to print an error like this: Cannot access memory at address 0x0 However, after the above commit we see an error like: unknown disassembler error (error = -1) The reason for this is this code in opcodes/i386-dis.c (in the print_insn function): if (address_mode == mode_64bit && sizeof (bfd_vma) < 8) { (*info->fprintf_func) (info->stream, _("64-bit address is disabled")); return -1; } This code effectively disallows us from ever disassembling 64-bit x86 code if we compiled GDB with a 32-bit bfd_vma. Notice we return -1 (indicating a failure to disassemble), but never call the memory_error_func callback. Prior to the above commit GDB, when it received the -1 return value would assume that a memory error had occurred and just print whatever value happened to be in the memory error address variable, the default value of 0 just happened to be fine because the test had asked GDB to do this 'disassemble 0x0,+4'. If we instead change the test to do 'disassemble 0x100,+4' then GDB would (previously) have still reported: Cannot access memory at address 0x0 which makes far less sense. In this commit I propose to fix this issue by changing the test to accept either the "Cannot access memory ..." string, or the newer "unknown disassembler error ..." string. With this change done the test now passes. However, there is one weakness with this strategy; if GDB broke such that we _always_ reported "unknown disassembler error ..." we would never notice. This clearly would be bad. To avoid this issue I have adjusted the all-architectures*.exp tests so that, when we disassemble for the default architecture (the one selected by "auto") we _only_ expect to get the "Cannot access memory ..." error string. [ Note: In an ideal world we should be able to disassemble any architecture at all times. There's no reason why the 64-bit x86 disassembler requires a 64-bit bfd_vma, other than the code happens to be written that way. We could rewrite the disassemble to not have this requirement, but, I don't plan to do that any time soon. ] Further, I have changed the all-architectures*.exp test so that we now disassemble at address 0x100, this should avoid us being able to pass by printing a default address of 0x0. I did originally change the address we disassembled at to 0x4, however, some architectures, e.g. ia64, have a default instruction alignment that is greater than 4, so would still round down to 0x0. I could have just picked 0x8 as an address, but I figured that 0x100 was likely to satisfy most architectures alignment requirements. 2021-11-30 Andrew Burgess gdb/python: add gdb.RemoteTargetConnection.send_packet This commits adds a new sub-class of gdb.TargetConnection, gdb.RemoteTargetConnection. This sub-class is created for all 'remote' and 'extended-remote' targets. This new sub-class has one additional method over its base class, 'send_packet'. This new method is equivalent to the 'maint packet' CLI command, it allows a custom packet to be sent to a remote target. The outgoing packet can either be a bytes object, or a Unicode string, so long as the Unicode string contains only ASCII characters. The result of calling RemoteTargetConnection.send_packet is a bytes object containing the reply that came from the remote. 2021-11-30 Andrew Burgess gdb: make packet_command function available outside remote.c In a later commit I will add a Python API to access the 'maint packet' functionality, that is, sending a user specified packet to the target. To make implementing this easier, this commit refactors how this command is currently implemented so that the packet_command function is now global. The new global send_remote_packet function takes an object that is an implementation of an abstract interface. Two functions within this interface are then called, one just before a packet is sent to the remote target, and one when the reply has been received from the remote target. Using an interface object in this way allows (1) for the error checking to be done before the first callback is made, this means we only print out what packet it being sent once we know we are going to actually send it, and (2) we don't need to make a copy of the reply if all we want to do is print it. One user visible changes after this commit are the error messages, which I've changed to be less 'maint packet' command focused, this will make them (I hope) better for when send_remote_packet can be called from Python code. So: "command can only be used with remote target" Becomes: "packets can only be sent to a remote target" And: "remote-packet command requires packet text as argument" Becomes: "a remote packet must not be empty" Additionally, in this commit, I've added support for packet replies that contain binary data. Before this commit, the code that printed the reply treated the reply as a C string, it assumed that the string only contained printable characters, and had a null character only at the end. One way to show the problem with this is if we try to read the auxv data from a remote target, the auxv data is binary, so, before this commit: (gdb) target remote :54321 ... (gdb) maint packet qXfer:auxv:read::0,1000 sending: "qXfer:auxv:read::0,1000" received: "l!" (gdb) And after this commit: (gdb) target remote :54321 ... (gdb) maint packet qXfer:auxv:read::0,1000 sending: "qXfer:auxv:read::0,1000" received: "l!\x00\x00\x00\x00\x00\x00\x00\x00\xf0\xfc\xf7\xff\x7f\x00\x00\x10\x00\x00\x00\x00\x00\x00\x00\xff\xf> (gdb) The binary contents of the reply are now printed as escaped hex. 2021-11-30 Andrew Burgess gdb/python: introduce gdb.TargetConnection object type This commit adds a new object type gdb.TargetConnection. This new type represents a connection within GDB (a connection as displayed by 'info connections'). There's three ways to find a gdb.TargetConnection, there's a new 'gdb.connections()' function, which returns a list of all currently active connections. Or you can read the new 'connection' property on the gdb.Inferior object type, this contains the connection for that inferior (or None if the inferior has no connection, for example, it is exited). Finally, there's a new gdb.events.connection_removed event registry, this emits a new gdb.ConnectionEvent whenever a connection is removed from GDB (this can happen when all inferiors using a connection exit, though this is not always the case, depending on the connection type). The gdb.ConnectionEvent has a 'connection' property, which is the gdb.TargetConnection being removed from GDB. The gdb.TargetConnection has an 'is_valid()' method. A connection object becomes invalid when the underlying connection is removed from GDB (as discussed above, this might be when all inferiors using a connection exit, or it might be when the user explicitly replaces a connection in GDB by issuing another 'target' command). The gdb.TargetConnection has the following read-only properties: 'num': The number for this connection, 'type': e.g. 'native', 'remote', 'sim', etc 'description': The longer description as seen in the 'info connections' command output. 'details': A string or None. Extra details for the connection, for example, a remote connection's details might be 'hostname:port'. 2021-11-30 Nelson Chu RISC-V: The vtype immediate with more than the defined 8 bits are preserved. According the rvv spec, https://github.com/riscv/riscv-v-spec/blob/master/vtype-format.adoc The bits of vtype immediate from 8 to (xlen - 1) should be reserved. Therefore, we should also dump the vtype immediate as numbers, when they are set over 8-bits. I think this is a bug that we used to support vediv extension and use the bit 8 and 9 of vtype, but forgot to update the behavior when removing the vediv. Consider the testcases, vsetvli a0, a1, 0x700 # the reserved bit 10, 9 and 8 are used. vsetvli a0, a1, 0x400 # the reserved bit 10 is used. vsetvli a0, a1, 0x300 # the reserved bit 9 and 8 are used. vsetvli a0, a1, 0x100 # the reserved bit 8 is used. vsetivli a0, 0xb, 0x300 # the reserved bit 9 and 8 are used. vsetivli a0, 0xb, 0x100 # the reserved bit 8 is used. The original objdump shows the following result, 0000000000000000 <.text>: 0: 7005f557 vsetvli a0,a1,1792 4: 4005f557 vsetvli a0,a1,1024 8: 3005f557 vsetvli a0,a1,e8,m1,tu,mu c: 1005f557 vsetvli a0,a1,e8,m1,tu,mu 10: f005f557 vsetivli a0,11,e8,m1,tu,mu 14: d005f557 vsetivli a0,11,e8,m1,tu,mu But in fact the correct result should be, 0000000000000000 <.text>: 0: 7005f557 vsetvli a0,a1,1792 4: 4005f557 vsetvli a0,a1,1024 8: 3005f557 vsetvli a0,a1,768 c: 1005f557 vsetvli a0,a1,256 10: f005f557 vsetivli a0,11,768 14: d005f557 vsetivli a0,11,256 gas/ * testsuite/gas/riscv/vector-insns.d: Added testcases to test the reserved bit 8 to (xlen-1) of vtype. * testsuite/gas/riscv/vector-insns.s: Likewise. include/ * opcode/riscv.h: Removed OP_MASK_VTYPE_RES and OP_SH_VTYPE_RES, since they are different for operand Vc and Vb. opcodes/ * riscv-dis.c (print_insn_args): Updated imm_vtype_res to extract the reserved immediate of vtype correctly. 2021-11-30 Nelson Chu RISC-V: Dump vset[i]vli immediate as numbers once vsew or vlmul is reserved. Consider the following case, vsetvli a0, a1, 0x4 # unrecognized vlmul vsetvli a0, a1, 0x20 # unrecognized vsew vsetivli a0, 0xb, 0x4 # unrecognized vlmul vsetivli a0, 0xb, 0x20 # unrecognized vsew For the current dis-assembler, we get the result, 0000000000000000 <.text>: 0: 0045f557 vsetvli a0,a1,e8,(null),tu,mu 4: 0205f557 vsetvli a0,a1,e128,m1,tu,mu 8: c045f557 vsetivli a0,11,e8,(null),tu,mu c: c205f557 vsetivli a0,11,e128,m1,tu,mu The vsew e128 and vlmul (null) are preserved according to the spec, so dump these fields looks wrong. Consider that we are used to dump the unrecognized csr as csr numbers directly, we should also dump the whole vset[i]vli immediates as numbers, once the vsew or vlmul is reserved. Therefore, following is what I expected, 0000000000000000 <.text>: 0: 0045f557 vsetvli a0,a1,4 4: 0205f557 vsetvli a0,a1,32 8: c045f557 vsetivli a0,11,4 c: c205f557 vsetivli a0,11,32 gas/ * testsuite/gas/riscv/vector-insns.d: Rewrite the vset[i]vli testcases since we should dump the immediate as numbers once the vsew or vlmul is reserved. * testsuite/gas/riscv/vector-insns.s: Likewise. opcodes/ * riscv-dis.c (print_insn_args): The reserved vsew and vlmul are NULL string in the riscv_vsew and riscv_vlmul, so dump the whole imm as numbers once one of them is NULL. * riscv-opc.c (riscv_vsew): Set the reserved vsew to NULL. (riscv_vlmul): Set the reserved vlmul to NULL. 2021-11-30 Mike Frysinger zlib: enable silent build rules ld: enable silent build rules Also add $(AM_V_xxx) to various manual rules in here. libctf: enable silent build rules Also add $(AM_V_xxx) to various manual rules in here. gprof: enable silent build rules Also add $(AM_V_xxx) to various manual rules in here. binutils: merge doc subdir up a level This avoids a recursive make into the doc subdir and speeds up the build slightly. It also allows for more parallelism. binutils: enable silent build rules Also add $(AM_V_xxx) to various manual rules in here. bfd: enable silent build rules Also add $(AM_V_xxx) to various manual rules in here. opcodes: enable silent build rules Also add $(AM_V_xxx) to various manual rules in here. 2021-11-30 GDB Administrator Automatic date update in version.in 2021-11-29 Tom Tromey Allow DW_ATE_UTF for Rust characters The Rust compiler plans to change the encoding of a Rust 'char' type to use DW_ATE_UTF. You can see the discussion here: https://github.com/rust-lang/rust/pull/89887 However, this fails in gdb. I looked into this, and it turns out that the handling of DW_ATE_UTF is currently fairly specific to C++. In particular, the code here assumes the C++ type names, and it creates an integer type. This comes from commit 53e710acd ("GDB thinks char16_t and char32_t are signed in C++"). The message says: Both places need fixing. But since I couldn't tell why dwarf2read.c needs to create a new type, I've made it use the per-arch built-in types instead, so that the types are only created once per arch instead of once per objfile. That seems to work fine. ... which is fine, but it seems to me that it's also correct to make a new character type; and this approach is better because it preserves the type name as well. This does use more memory, but first we shouldn't be too concerned about the memory use of types coming from debuginfo; and second, if we are, we should implement type interning anyway. Changing this code to use a character type revealed a couple of oddities in the C/C++ handling of TYPE_CODE_CHAR. This patch fixes these as well. I filed PR rust/28637 for this issue, so that this patch can be backported to the gdb 11 branch. 2021-11-29 Aaron Merey Tom de Vries [PR gdb/27026] CTRL-C is ignored when debug info is downloaded During debuginfod downloads, ctrl-c should result in the download being cancelled and skipped. However in some cases, ctrl-c fails to get delivered to gdb during downloading. This can result in downloads being unskippable. Fix this by ensuring that target_terminal::ours is in effect for the duration of each download. https://sourceware.org/bugzilla/show_bug.cgi?id=27026#c3 2021-11-29 Nick Clifton strings: Replace references to -u option with references to -U. PR 28632 2021-11-29 Tom de Vries [gdb/symtab] Fix segfault in search_one_symtab PR28539 describes a segfault in lambda function search_one_symtab due to psymbol_functions::expand_symtabs_matching calling expansion_notify with a nullptr symtab: ... struct compunit_symtab *symtab = psymtab_to_symtab (objfile, ps); if (expansion_notify != NULL) if (!expansion_notify (symtab)) return false; ... This happens as follows. The partial symtab ps is a dwarf2_include_psymtab for some header file: ... (gdb) p ps.filename $5 = 0x64fcf80 "/usr/include/c++/11/bits/stl_construct.h" ... The includer of ps is a shared symtab for a partial unit, with as user: ... (gdb) p ps.includer().user.filename $11 = 0x64fc9f0 \ "/usr/src/debug/llvm13-13.0.0-1.2.x86_64/tools/clang/lib/AST/Decl.cpp" ... The call to psymtab_to_symtab expands the Decl.cpp symtab (and consequently the shared symtab), but returns nullptr because: ... struct dwarf2_include_psymtab : public partial_symtab { ... compunit_symtab *get_compunit_symtab (struct objfile *objfile) const override { return nullptr; } ... Fix this by returning the Decl.cpp symtab instead, which fixes the segfault in the PR. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28539 2021-11-29 Nick Clifton Update description of string's -n option. PR 28632 * strings.c (usage): Update desciption of -n option. * doc/binutils.texi: Likewise. 2021-11-29 Tom de Vries [gdb/testsuite] Fix typo in proc lines Proc lines contains a typo: ... string_form { set $_line_string_form $value } ... Remove the incorrect '$' in '$_line_string_form'. Tested on x86_64-linux. 2021-11-29 Tom de Vries [gdb/testsuite] Use unique files in gdb.dwarf2/dw2-lines.exp While debugging a problem in gdb.dwarf2/dw2-lines.exp, I realized that the test-case generates all executables and associated temporary files using the same filenames. Fix this by adding a new proc prefix_id in lib/gdb.exp, and using it in the test-case. Tested on x86_64-linux. 2021-11-29 Tom de Vries [gdb/testsuite] Fix gdb.dwarf2/dw2-lines.exp with -m32 When running test-case gdb.dwarf2/dw2-lines.exp with target board -unix/-m32, we run into another instance of PR28383, where the dwarf assembler generates 64-bit relocations which are not supported by the 32-bit assembler: ... dw2-lines-dw.S: Assembler messages:^M outputs/gdb.dwarf2/dw2-lines/dw2-lines-dw.S:76: Error: \ cannot represent relocation type BFD_RELOC_64^M ... Fix this by using _op_offset in _line_finalize_header. Tested on x86_64-linux. 2021-11-29 Mike Frysinger sim: testsuite: drop most specific istarget checks We'll rely on the toolchain probing to determine whether each arch's tests can be run rather the current configure target. This allows testing all of the ports in a multitarget configuration. For now, we don't reformat the files entirely to make it easier to review, and in case we need to make adjustments. Once this feels like it's stable, we can flatten the code a bit by removing the if statement entirely. 2021-11-29 Mike Frysinger sim: testsuite: support parallel execution Break up the dejagnu logic so that we can parallelize the testsuite. This takes a page from gcc & gdb where each .exp is run in isolation instead of in serial. For most targets, this doesn't make much of a difference as they only have a single .exp. A few (like cris & frv) have multiple .exp though and will see a bit of a speed up. The real gain is when testing a multitarget build. This way we can run all the targets in parallel and cut the execution time a bit. On my system, it goes from ~155sec to ~100sec. We can gain further speedups by splitting up some of the larger .exp files into smaller groups. We'll do that in a followup though. 2021-11-29 Mike Frysinger sim: testsuite: expand arch specific toolchain settings Leverage the new per-port toolchain settings to initialize the env for eeach set of tests. This allows us to run all the tests in a multitarget build if the user sets up the vars. If they don't, we can still skip all the tests. 2021-11-29 Mike Frysinger sim: testsuite: setup per-port toolchain settings for multitarget build Gas does not support multitarget builds -- it still only supports a single input & output format. ld is a bit better, but requires manual flags to select the right output. This makes it impossible to run the complete testsuite in a multitarget build. To address this limitation, create a suite of FOR_TARGET variables so these can be set to precompiled as & ld programs. It requires a bit of setup ahead of time, but it's a one-time cost, and makes running the full testsuite at once much easier. 2021-11-29 GDB Administrator Automatic date update in version.in 2021-11-28 Alan Modra PR28629 NIOS2 fallout The test exactly matched wrong output. PR 28629 * testsuite/gas/nios2/relax.d: Update expected output. 2021-11-28 Mike Frysinger sim: add checks to core headers to prevent incorrect common building Some of the core sim headers rely on the SIM_AC_OPTION_BITSIZE macro which can change the size of core types. Since these haven't been unified across ports, add checks to make sure they aren't accidentally included when building for all ports. This caught the sim-load file using poisoned headers that it didn't actually need. sim: unify syscall.o building Now that we've unified all the syscall tables, this file does not rely on any port-specific settings, so move it up to building as part of the common step so we only do it once in a multibuild. sim: drop unused gentmap & nltvals.def logic Now that all ports have switched to target-newlib-* files, there's no need for these files & generating things at build time. So punt the logic and make target-newlib-syscall a hard requirement. sim: mcore: switch to new target-newlib-syscall Use the new target-newlib-syscall module. This is needed to merge all the architectures into a single build, and mcore has a custom syscall table for its newlib/libgloss port. sim: riscv: switch to new target-newlib-syscall Use the new target-newlib-syscall module. This is needed to merge all the architectures into a single build, and riscv has a custom syscall table for its newlib/libgloss port. 2021-11-28 Mike Frysinger sim: cr16: switch to new target-newlib-syscall Use the new target-newlib-syscall module. This is needed to merge all the architectures into a single build, and cr16 has a custom syscall table for its newlib/libgloss port. This allows cleaning up the syscall ifdef logic. We know these will always exist now. 2021-11-28 Mike Frysinger sim: d10v: switch to new target-newlib-syscall Use the new target-newlib-syscall module. This is needed to merge all the architectures into a single build, and d10v has a custom syscall table for its newlib/libgloss port. This allows cleaning up the syscall ifdef logic. We know these will always exist now. 2021-11-28 Mike Frysinger sim: sh: switch to new target-newlib-syscall Use the new target-newlib-syscall module. This is needed to merge all the architectures into a single build, and sh has a custom syscall table for its newlib/libgloss port. 2021-11-28 Mike Frysinger sim: v850: switch to new target-newlib-syscall Use the new target-newlib-syscall module. This is needed to merge all the architectures into a single build, and v850 has a custom syscall table for its newlib/libgloss port. This allows cleaning up the syscall ifdef logic. We know these will always exist now. 2021-11-28 Mike Frysinger sim: iq2000/lm32/m32c/moxie/rx: switch to new target-newlib-syscall.h Use the new target-newlib-syscall.h to provide the target syscall defines. These code paths are written specifically for the newlib ABI rather than being generalized, so switching them to the defines rather than trying to go through the dynamic callback conversion seems like the best trade-off for now. Might have to reconsider this in the future. 2021-11-28 Mike Frysinger sim: nltvals: pull target syscalls out into a dedicated source file Like we just did for pulling out the errno map, pull out the syscall maps into a dedicated common file. Most newlib ports are using the same syscall map, but not all, which means we have to do a bit more work to migrate. This commit adds the maps and switches the ports using the common default syscall table over to it. Ports using unique syscall tables are still using the old targ-map.c logic. Switching common ports over is easy by checking NL_TARGET, but the ppc code needs a bit more cleanup here hence its larger diff. 2021-11-28 Mike Frysinger sim: frv: resolve syscalls dynamically Avoid use of TARGET_ defines and rely on the callback layers to resolve these dynamically so we can support multiple syscall layers instead of assuming the newlib/libgloss numbers all the time. sim: mn10300: resolve syscalls dynamically Avoid use of TARGET_ defines and rely on the callback layers to resolve these dynamically so we can support multiple syscall layers instead of assuming the newlib/libgloss numbers all the time. sim: nltvals: drop i960 This port was dropped from gdb/bfd/sim years ago, so stop including its syscall constants too. sim: moxie: fix datadir handling Expand the value at `make` time rather than configure generation time so that we handle $(datarootdir) setting properly. 2021-11-28 GDB Administrator Automatic date update in version.in 2021-11-27 Simon Marchi gdb: fix typos in configure The variable names used to restore CFLAGS and LDFLAGS here don't quite match the names used above, resulting in losing the original CFLAGS and LDFLAGS. Fix that. Change-Id: I9cc2c3b48b1dc30c31a7143563c893fd6f426a0a 2021-11-27 Mike Frysinger sim: hw: mark hw_descriptors const sim: testsuite: add dedicated flag for init toolchain tests As we setup more reliable CC_FOR_TARGET variables for each target, the bfin way of overriding it to stuff custom CFLAGS doesn't scale well. Add a dedicated CFLAGS_FOR_TARGET_init setting that each set of tests can setup if they want to add custom options. sim: testsuite: clean up arch specific toolchain settings In a multitarget build, we process all targets in order, so make sure the toolchain settings from one don't leak into the next. 2021-11-27 Mike Frysinger sim: cris: always search for local rvdummy tool If the board info sets the sim to a basename that is found via $PATH (which is the default dejagnu behavior), the logic here to use its dirname to find rvdummy fails because it looks for `./rvdummy`. So switch it to always use the local build of rvdummy which is the one we want to be testing against in the first place. If we get a request for testing against a different setup, we can figure out & document the needs at that point, and then setup some config knobs to control it. 2021-11-27 Tom de Vries [gdb/testsuite] Fix FAIL in gdb.base/list-missing-source.exp In commit f8080fb7a44 "[gdb/testsuite] Add gdb.base/include-main.exp" a file gdb.base/main.c was added, which caused the following regression: ... (gdb) list^M (gdb) FAIL: gdb.base/list-missing-source.exp: list ... The problem is that the test-case does not expect to find a file main.c, but now it finds gdb.base/main.c. Fix this by using the more specific file name list-missing-source.c. Tested on x86_64-linux. 2021-11-27 Mike Frysinger sim: testsuite: fix bits-gen EXEEXT handling Add missing $(EXEEXT) to dependencies on bits-gen. These are actually build-only tools, but automake doesn't allow for build & host tools, so the rules are re-using EXEEXT. 2021-11-27 Mike Frysinger sim: testsuite: initial support for OS-specific tests We usually test against the newlib/libgloss environment, but for a few ports that also support Linux apps, we want to test that logic too. A lot of the C code is written such that it works with either newlib/libgloss or glibc/linux toolchains, but we have some tests that end up being Linux-specific. Cris has been using the target tuple as a rough proxy for this (where cris*-*-elf is assumed to be newlib/libgloss, and everything else is glibc/linux), but that is a bit too rough, and it doesn't work in a multitarget build. So lets create a few stub files that we can do compile tests with to detect the different setups, and then let tests declare which one they require (if they require any at all). 2021-11-27 Mike Frysinger sim: testsuite: unify basic C compiler checks Both bfin & cris ports test the C compiler to see if it works, but in their own way. Unify the checks in the common code so we can leverage them in more ports in the future, and collapse the bfin & cris code. 2021-11-27 Mike Frysinger sim: testsuite: rework sim_init usage The sim_init function was called by runtest for each test when --tool was set to sim. When we changed to --tool '' to collapse the testsuite dir, the init function was no longer called on every test. However, it was still being called explicitly by config/default.exp. It's not clear why that explicit call ever existed since, in the past, it meant it was redundant. Lets drop the single sim_init call in config/default.exp and move it out to all our tests. This replicates the runtest behavior so we can setup variables on a per-test basis which allows us to recollapse the sim_path logic back. We'll also leverage this in the future for toolchain setup. Also add a few comments clarifying the overall runtime behavior. 2021-11-27 Mike Frysinger sim: cris: fix testsuite hang when sim is missing If the cris sim hasn't been built yet, trying to run its testsuite will hang indefinitely. The common sim APIs already have this, so copy it over to the cris forks of the test+run functions. 2021-11-27 Mike Frysinger sim: testsuite: fix objdir handling The tests assume that the cwd is the objdir directory and write its intermediates to there all the time. When using runtest's --objdir setting though, this puts the files in the wrong place. This isn't a big problem currently as we never change --objdir, but in order to support parallel test execution, we're going to start setting that option, so clean up the code ahead of time. We also have to tweak some of the cris tests which were making assumptions about the argv[0] value. 2021-11-27 Mike Frysinger sim: testsuite: rename global_sim_options to SIMFLAGS_FOR_TARGET Now that all the other toolchain settings have been renamed to match the dejagnu settings of XXX_FOR_TARGET, rename global_sim_options to SIMFLAGS_FOR_TARGET too. sim: testsuite: replace global_ld_options with LDFLAGS_FOR_TARGET Only a few tests actually use global_ld_options, but we can replace the sim-specific settings with the dejagnu common LDFLAGS_FOR_TARGET and get the same result. 2021-11-27 GDB Administrator Automatic date update in version.in 2021-11-26 John David Anglin Fix ifunc test fails on hppa*-*-* 2021-11-26 John David Anglin PR ld/27442 ld/ChangeLog: * ld/testsuite/ld-ifunc/ifunc.exp (contains_irelative_reloc): Adjust regexp. Skip static ifunc-using executable test on hppa*-*-*. 2021-11-26 H.J. Lu gas: Update commit 4780e5e4933 Update commit 4780e5e4933a2497a5aecc4ceabbbb8e82aaf822 Author: Tom de Vries Date: Fri Nov 26 09:59:45 2021 +0100 [gas] Fix file 0 dir with -gdwarf-5 1. Replace i with j in for (j = 0; i < NUM_MD5_BYTES; ++j) 2. Pass -W to readelf to force CU: in output due to: if (do_wide || strlen (directory) < 76) printf (_("CU: %s/%s:\n"), directory, file_table[0].name); else printf ("%s:\n", file_table[0].name); PR gas/28629 * dwarf2dbg.c (out_dir_and_file_list): Fix a typo in commit 4780e5e4933. * testsuite/gas/elf/dwarf-5-nop-for-line-table.d: Pass -W to readelf. 2021-11-26 Mike Frysinger sim: testsuite: replace global_as_options with ASFLAGS_FOR_TARGET Only a few tests actually use global_as_options, but we can replace the sim-specific settings with the dejagnu common ASFLAGS_FOR_TARGET and get the same result. 2021-11-26 Tom de Vries [gdb/testsuite] Add gdb.base/include-main.exp The test-case gdb.ada/dgopt.exp uses the -gnatD switch, in combination with -gnatG. This causes the source file $src/gdb/testsuite/gdb.ada/dgopt/x.adb to be expanded into $build/gdb/testsuite/outputs/gdb.ada/dgopt/x.adb.dg, and the debug information should refer to the x.adb.dg file. That is the case for the .debug_line part: ... The Directory Table is empty. The File Name Table (offset 0x1c): Entry Dir Time Size Name 1 0 0 0 x.adb.dg ... but not for the .debug_info part: ... <11> DW_AT_name : $src/gdb/testsuite/gdb.ada/dgopt/x.adb <15> DW_AT_comp_dir : $build/gdb/testsuite/outputs/gdb.ada/dgopt ... Filed as PR gcc/103436. In C we can generate similar debug information, using a source file that does not contain any code, but includes another one that does: ... $ cat gdb/testsuite/gdb.base/include-main.c #include "main.c" ... such that in the .debug_line part we have: ... The Directory Table (offset 0x1c): 1 /home/vries/gdb_versions/devel/src/gdb/testsuite/gdb.base The File Name Table (offset 0x57): Entry Dir Time Size Name 1 1 0 0 main.c ... and in the .debug_info part: ... <11> DW_AT_name : $src/gdb/testsuite/gdb.base/include-main.c <15> DW_AT_comp_dir : $build/gdb/testsuite ... Add a C test-case that mimics gdb.ada/dgopt.exp, that is: - generate debug info as described above, - issue a list of a line in include-main.c, while the corresponding CU is not expanded yet. Tested on x86_64-linux. 2021-11-26 Mike Frysinger sim: testsuite: drop unused global_cc_options Nothing in the testsuite is using this setting, so let's drop it. Any code that wants to set compiler flags can use CFLAGS_FOR_TARGET instead to get the same effect. sim: testsuite: punt unused toolchain variables These haven't been used in over 20 years. The sim testsuite used to run these tools itself directly, but back in ~1999 it switched to the dejagnu helpers (e.g. target_assemble & target_link), and the dejagnu logic only utilizes XXX_FOR_TARGET variables. Punt them here to avoid confusion with dead code. 2021-11-26 Andrew Burgess Simon Cook gdb: add risc-v disassembler options support This commit adds support for RISC-V disassembler options to GDB. This commit is based on this patch which was never committed: https://sourceware.org/pipermail/binutils/2021-January/114944.html All of the binutils refactoring has been moved to a separate, earlier, commit, so this commit is pretty straight forward, just registering the required gdbarch hooks. 2021-11-26 Andrew Burgess Simon Cook opcodes/riscv: add disassembler options support to libopcodes In preparation for the next commit, which will add GDB support for RISC-V disassembler options, this commit restructures how the disassembler options are managed within libopcodes. The implementation provided here is based on this mailing list patch which was never committed: https://sourceware.org/pipermail/binutils/2021-January/114944.html which in turn took inspiration from the MIPS implementation of the same feature. The biggest changes from the original mailing list post are: 1. The GDB changes have been split into a separate patch, and 2. The `riscv_option_args_privspec` variable, which held the valid priv-spec values is now gone, instead we use the `riscv_priv_specs` array from bfd/cpu-riscv.c instead. include/ChangeLog: * dis-asm.h (disassembler_options_riscv): Declare. opcodes/ChangeLog: * riscv-dis.c (enum riscv_option_arg_t): New enum typedef. (riscv_options): New static global. (disassembler_options_riscv): New function. (print_riscv_disassembler_options): Rewrite to use disassembler_options_riscv. 2021-11-26 Tom de Vries [gas] Fix file 0 dir with -gdwarf-5 In out_dir_and_file_list, if file 0 is copied from file 1, only the filename is copied, and the dir and md5 fields are left to their default values. Fix this by adding the copy of the dir and md5 fields. gas/ChangeLog: 2021-11-26 Tom de Vries PR 28629 * dwarf2dbg.c (out_dir_and_file_list): When copying file 1 to file 0, also copy dir and md5 fields. * testsuite/gas/i386/dwarf5-line-4.d: Adjust expected output. 2021-11-26 Mike Frysinger sim: mips: avoid _ namespace Some C libraries export _P symbols in their headers (like older newlib and its ctype.h), so use P_ instead to avoid conflicts. ld: fix POSIX shell test usage POSIX test uses = for compares, not == which is a bashism. gas: enable silent build rules ld: fix --disable-multiple-abs-defs alignment in help 2021-11-26 GDB Administrator Automatic date update in version.in 2021-11-25 Enze Li gdb: ensure extension_language_python is always defined In this commit: commit c6a6aad52d9e839d6a84ac31cabe2b7e1a2a31a0 Date: Mon Oct 25 17:25:45 2021 +0100 gdb/python: make some global variables static building without Python was broken. The extension_language_python global was moved from being always defined, to only being defined when the HAVE_PYTHON macro was defined. As a consequence, building without Python support would result in errors like: /usr/bin/ld: extension.o:(.rodata+0x120): undefined reference to `extension_language_python' This commit fixes the problem by moving the definition of extension_language_python outside of the HAVE_PYTHON macro protection. 2021-11-25 Andrew Burgess Revert "gdb: add assert in remote_target::wait relating to async being off" This commit introduced a test failure in gdb.server/attach-flag.exp. I didn't spot this failure originally as the problem is fixed by this, as yet unpushed patch: https://sourceware.org/pipermail/gdb-patches/2021-November/183768.html I unfortunately didn't test each patch in the original series independently. I'll repost this patch after the above patch has been merged. This reverts commit 32b1f5e8d6b8ddd3be6e471c26dd85a1dac31dda. 2021-11-25 Nick Clifton Fix building the AArch64 assembler and disassembler when assertions are disabled. PR 28614 * aarch64-asm.c: Replace assert(0) with real code. * aarch64-dis.c: Likewise. * aarch64-opc.c: Likewise. 2021-11-25 Bruno Larsen PR gdb/28480: Improve ambiguous member detection Basic ambiguity detection assumes that when 2 fields with the same name have the same byte offset, it must be an unambiguous request. This is not always correct. Consider the following code: class empty { }; class A { public: [[no_unique_address]] empty e; }; class B { public: int e; }; class C: public A, public B { }; if we tried to use c.e in code, the compiler would warn of an ambiguity, however, since A::e does not demand an unique address, it gets the same address (and thus byte offset) of the members, making A::e and B::e have the same address. however, "print c.e" would fail to report the ambiguity, and would instead print it as an empty class (first path found). The new code solves this by checking for other found_fields that have different m_struct_path.back() (final class that the member was found in), despite having the same byte offset. The testcase gdb.cp/ambiguous.exp was also changed to test for this behavior. 2021-11-25 Jan W. Jagersma coff-go32: consistent 16-byte section alignment Section alignment for coff-go32 is inconsistent - The '.text' and '.data' sections are 16-byte aligned, but named sections '.text.*' and '.data.*' are only 4-byte aligned. '.gnu.linkonce.r.*' is aligned to 16 bytes, yet '.rodata' and '.rodata.*' are aligned to 4 bytes. For '.bss' all input sections are only aligned to 4 bytes. This primarily can cause trouble when using SSE instructions, which require their memory operands to be aligned to 16-byte boundaries. This patch solves the issue simply by setting the section alignment to 16 bytes, for all code and data sections referenced in the default linker script. * coff-go32.c (COFF_SECTION_ALIGNMENT_ENTRIES): Use partial name match for .text, .data. Add entries for .const, .rodata, .bss, .gnu.linkonce.b. 2021-11-25 Alan Modra Re: AArch64: Add support for AArch64 EFI (efi-*-aarch64) Commit b69c9d41e8 edited bfd/Makefile.in rather than using automake, which meant a typo in Makefile.am was not discovered and other differences in Makefile.in are seen with a proper regeneration. One difference was lack of an empty line between the pe-aarch64igen.c rule and the following $(BFD32_LIBS) etc. dependency rule, in the regenerated file. Not that it matters for proper "make" behaviour, but it's nicer with a line between those rules. Moving the rule earlier seems to cure the missing empty line. * Makefile.am (BFD64_BACKENDS): Correct typo. (BFD_H_DEPS, LOCAL_H_DEPS): Move earlier. Move rule using these deps earlier too. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate. * po/SRC-POTFILES.in: Regenerate. 2021-11-25 Nick Clifton Updated French translation for the opcodes directory. * po/fr.po; Updated French translation. 2021-11-25 Andrew Burgess gdb: rename source_styling_changed observer In a later commit I plan to add disassembler styling. In the same way that we have a source_styling_changed observer I would need to add a disassembler_styling_changed observer. However, currently, these observers would only be notified from cli-style.c:set_style_enabled, and observed in tui-winsource.c, tui_source_window::style_changed, as a result, having two observers seems unnecessary right now, so, in this commit, I plan to rename source_styling_changed to just styling_changed, then, in the later commit, when disassembler styling is added, I can use the same observer for both source styling, and disassembler styling. There should be no user visible changes after this commit. 2021-11-25 Andrew Burgess gdb/python: make some global variables static Make a couple of global variables static in python/python.c. To do this I had to move the definition of extension_language_python to later in the file. There should be no user visible changes after this commit. 2021-11-25 Andrew Burgess gdb: add assert in remote_target::wait relating to async being off While working on another patch I ended up in a situation where I had async mode disabled (with 'maint set target-async off'), but the async event token got marked anyway. In this situation GDB was continually calling into remote_target::wait, however, the async token would never become unmarked as the unmarking is guarded by target_is_async_p. We could just unconditionally unmark the token, but that would feel like just ignoring a bug, so, instead, lets assert that if !target_is_async_p, then the async token should not be marked. This assertion would have caught my earlier mistake. There should be no user visible changes with this commit. 2021-11-25 Andrew Burgess gdb: simplify remote_target::is_async_p This commit simplifies remote_target::is_async_p by removing the target_async_permitted check. In previous commits I have added additional assertions around the target_async_permitted flag into target.c, as a result we should now be confident that if target_can_async_p returns false, a target will never have async mode enabled. Given this, it should not be necessary to check target_async_permitted in remote_target::is_async_p, if this flag is false ::is_async_p should return false anyway. There is an assert to this effect in target_is_async_p. There should be no user visible change after this commit. 2021-11-25 Andrew Burgess gdb: add asserts in target.c for target_async_permitted The target_async_permitted flag allows a user to override whether a target can act in async mode or not. In previous commits I have moved the checking of this flag out of the various ::can_async_p methods and into the common target.c code. In this commit I will add some additional assertions into target_is_async_p and target_async. The rules these assertions are checking are: 1. A target that returns false for target_can_async_p should never become "async enabled", and so ::is_async_p should always return false. This is being checked in target_is_async_p. 2. GDB should never try to enable async mode for a target that returns false for target_can_async_p, this is checked in target_async. There are a few places where we call the ::is_async_p method directly, in these cases we will obviously not pass through the assert in target_is_async_p, however, there are also plenty of places where we do call target_is_async_p so if GDB starts to misbehave we should catch it quickly enough. There should be no user visible changes after this commit. 2021-11-25 Andrew Burgess gdb: hoist target_async_permitted checks into target.c This commit moves the target_async_permitted check out of each targets ::can_async_p method and into the target_can_async_p wrapper function. I've left some asserts in the two ::can_async_p methods that I changed, which will hopefully catch any direct calls to these methods that might be added in the future. There should be no user visible changes after this commit. 2021-11-25 Andrew Burgess gdb: introduce a new overload of target_can_async_p There are a few places where we call the target_ops::can_async_p member function directly, instead of using the target_can_async_p wrapper. In some of these places this is because we need to ask before the target has been pushed, and in another location (in target.c) it seems unnecessary to go through the wrapper when we are already in target.c code. However, in the next commit I'd like to hoist some common checks out of target specific code into target.c. To achieve this, in this commit, I introduce a new overload of target_can_async_p which takes a target_ops pointer, and calls the ::can_async_p method directly. I then make use of the new overload where appropriate. There should be no user visible changes after this commit. 2021-11-25 Clément Chigot ld/testsuite/ld-elfvsb: correctly test "weak hidden symbol DSO last" The test must be done with the shared object and not with the object file which is already being tested above. ld/ * testsuite/ld-elfvsb/elfvsb.exp: use .so file in "weak hidden symbol DSO last" 2021-11-25 Tom de Vries [gdb/cli] Add "set logging enabled", deprecate "set logging on/off" Before commit 3b6acaee895 "Update more calls to add_prefix_cmd" we had the following output for "show logging file": ... $ gdb -q -batch -ex "set trace-commands on" \ -ex "set logging off" \ -ex "show logging file" \ -ex "set logging on" \ -ex "show logging file" +set logging off +show logging file Future logs will be written to gdb.txt. +set logging on +show logging file Currently logging to "gdb.txt". ... After that commit we have instead: ... +set logging off +show logging file The current logfile is "gdb.txt". +set logging on +show logging file The current logfile is "gdb.txt". ... Before the commit, whether logging is enabled or not can be deduced from the output of the command. After the commit, the message is unified and it's no longer clear whether logging is enabled or not. Fix this by: - adding a new command "show logging enabled" - adding a corresponding new command "set logging enabled on/off" - making the commands "set logging on/off" deprecated aliases of the "set logging enabled on/off" command. Update the docs and testsuite to use "set logging enabled". Mention the new and deprecated commands in NEWS. Tested on x86_64-linux. 2021-11-25 Tom de Vries [gdb/cli] Fix typo in logging overwrite help text Currently we have: ... $ gdb -q -batch -ex "help set logging overwrite" Set whether logging overwrites or appends to the log file. If set, logging overrides the log file. ... Fix overrides -> overwrites typo. 2021-11-25 GDB Administrator Automatic date update in version.in 2021-11-24 Simon Marchi gdb: fix help doc for "set index-cache enabled" When implementing this command, I put "help doc" as a placeholder for the help string, and forgot to update it. Change it for a real help string. Change-Id: Id23c2142c5073dc570bd8a706e9ec6fa8c40eb09 2021-11-24 Simon Marchi Revert (part of) "gdb fix for catch-syscall.exp" This reverts (par of) commit ab198279120fe7937c0970a8bb881922726678f9. This commit changed what the test expects when catching the execve syscall based on the behavior seen on a Linux PowerPC machine. That is, we get an "entry" event, but no "return" event. This is not what we get on Linux with other architectures, though, and it seems like a PowerPC-specific bug. Revert the part of the patch related to this, but not the other hunk. Change-Id: I4248776e4299f10999487be96d4acd1b33639996 2021-11-24 Nick Clifton Fix an illegal memory access parsing a corrupt sysroff file. PR 28564 * sysdump.c (getCHARS): Check for an out of bounds read. 2021-11-24 Andrew Burgess gdb: fix crash when reading ECOFF debug information In commit: commit 633cf2548bcd3dafe297e21a1dd3574240280d48 Date: Wed May 9 15:42:28 2018 -0600 Remove cleanups from mdebugread.c the following change was made in the function parse_partial_symbols in mdebugread.c: - fdr_to_pst = XCNEWVEC (struct pst_map, hdr->ifdMax + 1); - old_chain = make_cleanup (xfree, fdr_to_pst); + gdb::def_vector fdr_to_pst_holder (hdr->ifdMax + 1); + fdr_to_pst = fdr_to_pst_holder.data (); The problem with this change is that XCNEWVEC calls xcalloc, which in turn calls calloc, and calloc zero initializes the allocated memory. In contrast, the new line gdb::def_vector specifically does not initialize the underlying memory. This is a problem because, later on in this same function, we increment the n_globals field within 'struct pst_map' objects stored in the vector. The incrementing is now being done from an uninitialized starting point. In this commit we switch from using gdb::def_vector to using std::vector, this alone should be enough to ensure that the fields are initialized to zero. However, for extra clarity, I have also added initial values in the 'struct pst_map' to make it crystal clear how the struct will start up. This issue was reported on the mailing list here: https://sourceware.org/pipermail/gdb-patches/2021-November/183693.html Co-Authored-By: Lightning 2021-11-24 GDB Administrator Automatic date update in version.in 2021-11-23 Alexandra Hájková configure.ac: Check for the readline.h explicitly When readline development package is missing make fails with "configure: error: system readline is not new enough" which might be confusing. This patch checks for the readline.h explicitly and makes make to warn about the missing package. 2021-11-23 Tamar Christina AArch64: Add support for AArch64 EFI (efi-*-aarch64). This adds support for efi-*-aarch64 by virtue of adding a new PEI target pei-aarch64-little. This is not a full target and only exists to support EFI at this time. This means that this target does not support relocation processing and is mostly a container format. This format has been added to elf based aarch64 targets such that efi images can be made natively on Linux. However this target is not valid for use with gas but only with objcopy. With these changes the resulting file is recognized as an efi image by third party tools: > pecli info hello.efi Metadata ================================================================================ MD5: 598c32a778b0f0deebe977fef8578c4e SHA1: 4580121edd5cb4dc40f51b28f171fd15250df84c SHA256: 3154bd7cf42433d1c957f6bf55a17ad8c57ed41b29df2d485703349fd6ff1d5c Imphash: Size: 47561 bytes Type: PE32+ executable (EFI application) (stripped to external PDB), for MS Windows Compile Time: 1970-01-01 00:00:00 (UTC - 0x0 ) Entry point: 0x2000 (section .text) Sections ================================================================================ Name RWX VirtSize VirtAddr RawAddr RawSize Entropy md5 .text R-X 0x5bb0 0x2000 0x400 0x5c00 6.39 551fbc264256a3f387de8a891500ae0d .reloc R-- 0xc 0x8000 0x6000 0x200 0.02 0c45f6d812d079821c1d54c09ab89e1d .data RW- 0x1d88 0x9000 0x6200 0x1e00 4.18 5d1137c09f01289dc62bf754f7290db3 .dynamic RW- 0xf0 0xb000 0x8000 0x200 0.34 5c94ed3206f05a277e6f04fbf131f131 .rela R-- 0xe58 0xc000 0x8200 0x1000 1.87 8b5c6bc30f3acb7ca7bf2e6789d68519 .dynsym R-- 0x138 0xd000 0x9200 0x200 0.96 bdcf5101da51aadc663ca8859f88138c Imports ================================================================================ Any magic number is based on the Microsoft PE specification [1]. [1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format bfd/ChangeLog: 2021-10-21 Tamar Christina PR binutils/26206 * .gitignore (pe-aarch64igen.c): New. * Makefile.am (pei-aarch64.lo, pe-aarch64igen.lo, pei-aarch64.c, pe-aarch64igen.c): Add support. * Makefile.in: Likewise. * bfd.c (bfd_get_sign_extend_vma): Add pei-aarch64-little. * coff-aarch64.c: New file. * coffcode.h (coff_set_arch_mach_hook, coff_set_flags, coff_write_object_contents) Add aarch64 (aarch64_pei_vec) support. * config.bfd: Likewise. * configure: Likewise. * configure.ac: Likewise. * libpei.h (GET_OPTHDR_IMAGE_BASE, PUT_OPTHDR_IMAGE_BASE, GET_OPTHDR_SIZE_OF_STACK_RESERVE, PUT_OPTHDR_SIZE_OF_STACK_RESERVE, GET_OPTHDR_SIZE_OF_STACK_COMMIT, PUT_OPTHDR_SIZE_OF_STACK_COMMIT, GET_OPTHDR_SIZE_OF_HEAP_RESERVE, PUT_OPTHDR_SIZE_OF_HEAP_RESERVE, GET_OPTHDR_SIZE_OF_HEAP_COMMIT, PUT_OPTHDR_SIZE_OF_HEAP_COMMIT, GET_PDATA_ENTRY, _bfd_peAArch64_bfd_copy_private_bfd_data_common, _bfd_peAArch64_bfd_copy_private_section_data, _bfd_peAArch64_get_symbol_info, _bfd_peAArch64_only_swap_filehdr_out, _bfd_peAArch64_print_private_bfd_data_common, _bfd_peAArch64i_final_link_postscript, _bfd_peAArch64i_only_swap_filehdr_out, _bfd_peAArch64i_swap_aouthdr_in, _bfd_peAArch64i_swap_aouthdr_out, _bfd_peAArch64i_swap_aux_in, _bfd_peAArch64i_swap_aux_out, _bfd_peAArch64i_swap_lineno_in, _bfd_peAArch64i_swap_lineno_out, _bfd_peAArch64i_swap_scnhdr_out, _bfd_peAArch64i_swap_sym_in, _bfd_peAArch64i_swap_sym_out, _bfd_peAArch64i_swap_debugdir_in, _bfd_peAArch64i_swap_debugdir_out, _bfd_peAArch64i_write_codeview_record, _bfd_peAArch64i_slurp_codeview_record, _bfd_peAArch64_print_ce_compressed_pdata): New. * peXXigen.c (_bfd_XXi_swap_aouthdr_in, _bfd_XXi_swap_aouthdr_out, pe_print_pdata, _bfd_XX_print_private_bfd_data_common, _bfd_XX_bfd_copy_private_section_data, _bfd_XXi_final_link_postscript): Support COFF_WITH_peAArch64, * pei-aarch64.c: New file. * peicode.h (coff_swap_scnhdr_in, pe_ILF_build_a_bfd, pe_ILF_object_p): Support COFF_WITH_peAArch64. (jtab): Add dummy entry that traps. * targets.c (aarch64_pei_vec): New. binutils/ChangeLog: 2021-10-21 Tamar Christina PR binutils/26206 * NEWS: Add new support. * objcopy.c (convert_efi_target): Add efi-*-aarch64 support. * testsuite/binutils-all/aarch64/pei-aarch64-little.d: New test. * testsuite/binutils-all/aarch64/pei-aarch64-little.s: New test. include/ChangeLog: 2021-10-21 Tamar Christina PR binutils/26206 * coff/aarch64.h: New file. * coff/pe.h (IMAGE_FILE_MACHINE_ARM64): New. 2021-11-23 Alan Modra binutils debuginfod test A missing "return" resulted in this non-ELF fail: x86_64-w64-mingw32 +FAIL: debuginfod (create separate debug info file) Also, the debuginfod I have installed does not appear to handle non-native ELF objects, so only run the test when native. * testsuite/binutils-all/debuginfod.exp: Don't run test unless native ELF. 2021-11-23 Alan Modra Update bug reporting address https://sourceware.org/bugzilla/ everywhere bfd/ * configure.ac (ACX_BUGURL): Set to https://sourceware.org/bugzilla/ * po/Make-in (msgid-bugs-address): Likewise. * README: Report bugs to the above. * configure: Regenerate. binutils/ * po/Make-in (msgid-bugs-address): Update. gas/ * README: Update bug address. Delete mention of gcc. * po/Make-in: Update bug address. gold/ * po/Make-in: Update bug address. gprof/ * po/Make-in: Update bug address. ld/ * po/Make-in: Update bug address. opcodes/ * po/Make-in: Update bug address. 2021-11-23 Jan (janneke) Nieuwenhuizen gdb: more compile fixes for gnu-nat.c This fixes compile errors like ../../gdb-11.1/gdb/gnu-nat.c: In function void add_task_commands(): ../../gdb-11.1/gdb/gnu-nat.c:3204:17: error: no matching function for call to add_cmd(const char [8], command_class, cmd_list_element*&, char*, cmd_list_element**) 3204 | &setlist); | ^ In file included from ../../gdb-11.1/gdb/completer.h:21, from ../../gdb-11.1/gdb/symtab.h:36, from ../../gdb-11.1/gdb/infrun.h:21, from ../../gdb-11.1/gdb/target.h:42, from ../../gdb-11.1/gdb/inf-child.h:23, from ../../gdb-11.1/gdb/gnu-nat.h:38, from ../../gdb-11.1/gdb/gnu-nat.c:24: ../../gdb-11.1/gdb/command.h:160:33: note: candidate: cmd_list_element* add_cmd(const char*, command_class, void (*)(const char*, int), const char*, cmd_list_element**) 160 | extern struct cmd_list_element *add_cmd (const char *, enum command_class, | ^~~~~~~ ../../gdb-11.1/gdb/command.h:161:30: note: no known conversion for argument 3 from cmd_list_element* to void (*)(const char*, int) 161 | cmd_const_cfunc_ftype *fun, | ~~~~~~~~~~~~~~~~~~~~~~~^~~ ../../gdb-11.1/gdb/command.h:167:33: note: candidate: cmd_list_element* add_cmd(const char*, command_class, const char*, cmd_list_element**) 167 | extern struct cmd_list_element *add_cmd (const char *, enum command_class, | ^~~~~~~ ../../gdb-11.1/gdb/command.h:167:33: note: candidate expects 4 arguments, 5 provided ../../gdb-11.1/gdb/gnu-nat.c:3210:18: error: no matching function for call to add_cmd(const char [8], command_class, cmd_list_element*&, char*, cmd_list_element**) 3210 | &showlist); | ^ Change-Id: Ie9029363d3fb40e34e8f5b1ab503745bc44bfe3f 2021-11-23 Andrea Monaco gnu-nat.c: fix calls to add_info_alias Some time ago add_info_alias was changed (commit e0f25bd9717c7973197095523db7c1cdc956cea2). These calls were not updated and caused errors on compilation. Change-Id: I354ae4e8b8926d785abc94ec7142471ffd76d2de 2021-11-23 GDB Administrator Automatic date update in version.in 2021-11-22 Simon Marchi gdb: pass more const target_waitstatus by reference While working on target_waitstatus changes, I noticed a few places where const target_waitstatus objects could be passed by reference instead of by pointers. And in some cases, places where a target_waitstatus could be passed as const, but was not. Convert them as much as possible. Change-Id: Ied552d464be5d5b87489913b95f9720a5ad50c5a 2021-11-22 Simon Marchi gdb: introduce target_waitkind_str, use it in target_waitstatus::to_string I would like to print target_waitkind values in debug messages, so I think that a target_waitkind-to-string function would be useful. While at it, use it in target_waitstatus::to_string. This changes the output of target_waitstatus::to_string a bit, but I think it is for the better. The debug messages will show a string matching exactly the target_waitkind enumerator (minus the TARGET_WAITKIND prefix). As a convenience, make string_appendf return the same reference to string it got as a parameter. This allows doing this: return string_appendf (str, "foo"); ... keeping the code concise. Change-Id: I383dffc9c78614e7d0668b1516073905e798eef7 2021-11-22 Simon Marchi gdb: rename target_waitstatus_to_string to target_waitstatus::to_string Make target_waitstatus_to_string a "to_string" method of target_waitstatus, a bit like we have ptid_t::to_string already. This will save a bit of typing. Change-Id: Id261b7a09fa9fa3c738abac131c191a6f9c13905 2021-11-22 Nelson Chu RISC-V: Removed the redundant NULL pointer check in the riscv_update_subset. If we always use the .option arch to call the riscv_update_subset, then it is almost impossible that the input string will be NULL. Therefore, just remove the redundant NULL pointer check in the riscv_update_subset. bfd/ * elfxx-riscv.c (riscv_update_subset): Removed the redundant NULL pointer check. 2021-11-22 Nelson Chu RISC-V: Replace .option rvc/norvc with .option arch, +c/-c. Since the .option rvc/norvc directives are obsolete, replace them with the new proposed diretives: .option arch, +c/-c. And also reset the riscv_opts.rvc flag for the .option arch directives. gas/ * config/tc-riscv.c (s_riscv_option): Reset the riscv_opts.rvc for the .option arch directives. * testsuite/gas/riscv/align-1.s: Replace the obsolete .option rvc/norvc with .option arch, +c/-c. * testsuite/gas/riscv/c-add-addi.s: Likewise. * testsuite/gas/riscv/c-nonzero-imm.s: Likewise. * testsuite/gas/riscv/c-nonzero-reg.s: Likewise. * testsuite/gas/riscv/c-zero-imm-64.s: Likewise. * testsuite/gas/riscv/c-zero-imm.s: Likewise. * testsuite/gas/riscv/c-zero-reg.s: Likewise. * testsuite/gas/riscv/ext.s: Likewise. * testsuite/gas/riscv/mapping-01.s: Likewise. * testsuite/gas/riscv/mapping-02.s: Likewise. * testsuite/gas/riscv/mapping-03.s: Likewise. * testsuite/gas/riscv/mapping-04.s: Likewise. * testsuite/gas/riscv/no-relax-align-2.s: Likewise. * testsuite/gas/riscv/shamt-32.s: Likewise. * testsuite/gas/riscv/shamt-64.s: Likewise. 2021-11-22 Tom de Vries [gdb/build] Fix x86_64 x32 build A build error on x86_64 with x32 abi was reported here ( https://sourceware.org/pipermail/gdb/2021-November/049787.html ): ... gdb/nat/amd64-linux-siginfo.c:280:42: error: \ 'struct compat_x32_siginfo_t::::' has no member \ named 'si_addr_bnd' 280 | #define cpt_si_lower _sifields._sigfault.si_addr_bnd._lower | ^~~~~~~~~~~ gdb/nat/amd64-linux-siginfo.c:337:38: note: in expansion of macro 'cpt_si_lower' 337 | to->cpt_si_lower = from_ptrace.cpt_si_lower; | ^~~~~~~~~~~~ ... The problem is that code added in commit d3d7d1ba3bb "[gdb/tdep] Handle si_addr_bnd in compat_siginfo_from_siginfo" doesn't compile on an x86_64 x32 setup, because compat_x32_siginfo_t doesn't have the si_addr_bnd fields. Fix this conservatively by disabling the code for x32. Tested on x86_64-linux. 2021-11-22 Nelson Chu RISC-V: PR28610, Fix ASAN heap-buffer-overflow error in riscv_update_subset. The architecture parser in riscv_update_subset shouldn't check (or access) the pointer space which doesn't exist. bfd/ pr 28610 * elfxx-riscv.c (riscv_update_subset): The architecture parser shouldn't access the pointer space which doesn't exist. 2021-11-22 Tom de Vries [gdb/symtab] Support .debug_line with DW_FORM_line_strp I noticed a new gcc option -gdwarf64 and tried it out (using gcc 11.2.1). With a test-case hello.c: ... int main (void) { printf ("hello\n"); return 0; } ... compiled like this: ... $ gcc -g -gdwarf64 ~/hello.c ... I ran into: ... $ gdb -q -batch a.out DW_FORM_line_strp pointing outside of .debug_line_str section \ [in module a.out] ... Debugging gdb revealed that the string offset is: ... (gdb) up objfile=0x182ab70, str_offset=1378684502312, form_name=0xeae9b5 "DW_FORM_line_strp") at src/gdb/dwarf2/section.c:208 208 error (_("%s pointing outside of %s section [in module %s]"), (gdb) p /x str_offset $1 = 0x14100000128 (gdb) ... which is read when parsing a .debug_line entry at 0x1e0. Looking with readelf at the 0x1e0 entry, we have: ... The Directory Table (offset 0x202, lines 2, columns 1): Entry Name 0 (indirect line string, offset: 0x128): /data/gdb_versions/devel 1 (indirect line string, offset: 0x141): /home/vries ... which in a hexdump looks like: ... 0x00000200 1f022801 00004101 00000201 1f020f02 ... What happens is the following: - readelf interprets the DW_FORM_line_strp reference to .debug_line_str as a 4 byte value, and sees entries 0x00000128 and 0x00000141. - gdb instead interprets it as an 8 byte value, and sees as first entry 0x0000014100000128, which is too big so it bails out. AFAIU, gdb is wrong. It assumes DW_FORM_line_strp is 8 bytes on the basis that the corresponding CU is 64-bit DWARF. However, the .debug_line contribution has it's own initial_length field, and encodes there that it's 32-bit DWARF. Fix this by using the correct offset size for DW_FORM_line_strp references in .debug_line. Note: the described test-case does trigger this complaint (both with and without this patch): ... $ gdb -q -batch -iex "set complaints 10" a.out During symbol reading: intermixed 32-bit and 64-bit DWARF sections ... The reason that the CU has 64-bit dwarf is because -gdwarf64 was passed to gcc. The reason that the .debug_line entry has 32-bit dwarf is because that's what gas generates. Perhaps this is complaint-worthy, but I don't think it is wrong. Tested on x86_64-linux, using native and target board dwarf64.exp. 2021-11-22 Tom de Vries [gdb/testsuite] Add target board dwarf64.exp Add a new target board dwarf64.exp, that runs test with -gdwarf64. Tested on x86_64-linux. 2021-11-22 Tom de Vries [gdb/testsuite] Support .debug_line v5 in dwarf assembler The v5 section version for .debug_line has: - two new fields address_size and segment_selector_size - a different way to encode the directory and filename tables. Add support for this in the dwarf assembler. For now, make the v5 directory and filename tables work with the v4 type of specification in the test-cases by adding duplicate entries at position 0. This will need to be properly fixed with an intrusive fix that changes how directory and filename entries are specified in the test-cases, f.i: ... set diridx [include_dir "${srcdir}/${subdir}"] set fileidx [file_name "$srcfile" $diridx] ... Tested on x86_64-linux. 2021-11-22 Tom de Vries [gdb/testsuite] Factor out _line_finalize_header Rather than generate dwarf immediately in procs include_dir and file_name, postpone generation and store the data in variables. Then handle the generation in a new proc _line_finalize_header. Tested on x86-64-linux. 2021-11-22 Tom de Vries [gdb/testsuite] Support .debug_line v4 in dwarf assembler The .debug_line header got a new field in v4: maximum_operations_per_instruction. Generate this field in the dwarf assembler, for now hardcoding the value to 1, meaning non-VLIW. Tested on x86_64-linux. 2021-11-22 Tom de Vries [gdb/testsuite] Add test-case gdb.dwarf2/dw2-lines.exp Add a new test-case gdb.dwarf2/dw2-lines.exp that tests various .debug_line sections. Tested on x86_64-linux. 2021-11-22 Tom de Vries [gdb/testsuite] Speed up MACRO_AT_* calls Currently, for each MACRO_AT_range or MACRO_AT_func in dwarf assembly the following is done: - $srcdir/$subdir/$srcfile is compiled to an executable using flags "debug" - a new gdb instance is started - the new executable is loaded. This is inefficient, because the executable is identical within the same Dwarf::assemble call. Share the gdb instance in the same Dwarf::assemble invocation, which speeds up a make check with RUNTESTFLAGS like this to catch all dwarf assembly test-cases: ... rtf=$(echo $(cd src/gdb/testsuite; find gdb.* -type f -name "*.exp" \ | xargs grep -l Dwarf::assemble)) ... from: ... real 1m39.916s user 1m25.668s sys 0m21.377s ... to: ... real 1m29.512s user 1m17.316s sys 0m19.100s ... Tested on x86_64-linux. 2021-11-22 GDB Administrator Automatic date update in version.in 2021-11-21 Lancelot SIX gdb/testsuite: Remove duplicates in gdb.base/catch-signal.exp When running the testsuite I have the following: Running .../gdb/testsuite/gdb.base/catch-signal.exp ... DUPLICATE: gdb.base/catch-signal.exp: SIGHUP: continue DUPLICATE: gdb.base/catch-signal.exp: SIGHUP: continue DUPLICATE: gdb.base/catch-signal.exp: 1: continue DUPLICATE: gdb.base/catch-signal.exp: 1: continue DUPLICATE: gdb.base/catch-signal.exp: SIGHUP SIGUSR2: continue DUPLICATE: gdb.base/catch-signal.exp: SIGHUP SIGUSR2: continue This patch removes DUPLICATE in gdb.base/catch-signal.exp by explicitly giving names to the offending 'gdb_test "continue"' statements to make them distinct. Tested on x86_64-linux. 2021-11-21 Mike Frysinger sim: v850: fix cpu_option testsuite handling The v850 testsuite code has been testing the $opt variable, but this was never actually set anywhere globally or v850-specific. Instead, this was a random variable leaking out of the sh testsuite code. As far as I can tell, it has always been this way. That means the code only ever tested the v850 cpu target (which is the default). This failure can be easily seen in practice by running the v850 code in isolation and seeing it crash: $ runtest v850/allinsns.exp ... Running target unix Using /usr/share/dejagnu/baseboards/unix.exp as board description file for target. Using /usr/share/dejagnu/config/unix.exp as generic interface file for target. Using ../../../sim/testsuite/config/default.exp as tool-and-target-specific interface file. WARNING: Assuming target board is the local machine (which is probably wrong). You may need to set your DEJAGNU environment variable. Running ../../../sim/testsuite/v850/allinsns.exp ... ERROR: tcl error sourcing ../../../sim/testsuite/v850/allinsns.exp. ERROR: tcl error code TCL LOOKUP VARNAME opt ERROR: can't read "opt": no such variable while executing "switch -regexp -- $opt { Backing up a bit, the reason for this logic in the first place is because the common sim testsuite code makes an assumption about the assembler options with cpu_option -- the option and its value are always separated by an =. This is not the case with v850. So tweak the core sim logic a bit to support omitting the = so that we can switch v850 to the standard all_machs setting and avoid opt entirely. 2021-11-21 GDB Administrator Automatic date update in version.in 2021-11-20 Jeff Law Fix intermittent failures on the H8, particularly H8/SX tests. The upstream GCC tester has showed spurious execution failures on the H8 target for the H8/SX multilibs. I suspected memory corruption or an uninitialized variable early as the same binary would sometimes work and sometimes it got the wrong result. Worse yet, the point where the test determined it was getting the wrong result would change. Because it only happened on the H8/SX variant I was able to zero in on the "mova" support and the "short form" of those instructions in particular. As the code stands it checks if code->op3.type == 0 to try and identify cases where op3 wasn't filled in and thus we've got the short form of the mova instruction. But for the short-form of those instructions we never set any of the "op3" data structure. We get whatever was lying around -- it's usually zero and thus things usually work, but if the stale data was nonzero, then we'd fail to recognize the instruction as a short-form and fail to set up the various fields appropriately. I initially initialized the op3.type field to zero, but didn't like that because it was inconsistent with how other operands were initialized. Bringing consistency meant using -1 as the initializer value and adjusting the check for short form mova appropriately. I've had this in the upstream GCC tester for perhaps a year at this point and haven't seen any of the intermittent failures again. 2021-11-20 Simon Marchi gdbsupport: fix array-view compilation with c++11 && _GLIBCXX_DEBUG When building with -std=c++11 and -D_GLIBCXX_DEBUG=1, we get some errors like: CXX unittests/array-view-selftests.o In file included from /home/smarchi/src/binutils-gdb/gdb/utils.h:25, from /home/smarchi/src/binutils-gdb/gdb/defs.h:630, from /home/smarchi/src/binutils-gdb/gdb/unittests/array-view-selftests.c:20: /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/array-view.h: In instantiation of constexpr gdb::array_view gdb::array_view::slice(gdb::array_view::size_type, gdb::array_view::size_type) const [with T = unsigned char; gdb::array_view::size_type = long unsigned int: /home/smarchi/src/binutils-gdb/gdb/unittests/array-view-selftests.c:532:29: required from here /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/array-view.h:192:3: error: body of constexpr function constexpr gdb::array_view gdb::array_view::slice(gdb::array_view::size_type, gdb::array_view::size_type) const [with T = unsigned char; gdb::array_view::size_type = long unsigned int not a return-statement 192 | } | ^ This is because constexpr functions in c++11 can only consist of a single return statement, so we can't have the gdb_assert in there. Make the gdb_assert presence conditional to the __cplusplus version, to enable it only for c++14 and later. Change-Id: I2ac33f7b4bd1765ddc3ac8d07445b16ac1f340f0 2021-11-20 Tom de Vries [gdb/build] Check if libsource-highlight is usable When building gdb with g++ 4.8.5, I ran into: ... ld: source-cache.o: in function `source_cache::ensure(symtab*)': source-cache.c:207: undefined reference to \ srchilite::SourceHighlight::SourceHighlight(std::string const&) ... [ I configured gdb without explicit settings related to source-highlight, so we're excercising the enable_source_highlight=auto scenario. ] The problem is that: - the source-highlight library is build with system compiler g++ 7.5.0 which uses the new libstdc++ library abi (see https://gcc.gnu.org/onlinedocs/libstdc++/manual/using_dual_abi.html ) - gdb is build using g++ 4.8.5 which uses the old abi. [ There's a compatibility macro _GLIBCXX_USE_CXX11_ABI, but that doesn't work for this case. Instead, it enables the opposite case where the source-highlight library is build with g++ 4.8.5 and gdb is build with g++ 7.5.0. ] Fix this by checking whether the source-highlight library is usable during configuration. In the enable_source_highlight=auto scenario, this allows the build to skip the unusable library and finish successfully. In the enable_source_highlight=yes scenario, this allows the build to error out earlier. Tested on x86_64-linux. 2021-11-20 Clément Chigot bfd: remove wrong comment in xcofflink.c This comment was long time ago associated to the function "xcoff_build_ldsyms" which have since been replaced by "xcoff_build_ldsym". * xcofflink.c: Remove wrong comment. 2021-11-20 Mike Frysinger sim: bfin: fix short --env usage in testsuite Now that we have more than one option that matches "--env", the test config here doesn't work. Use the explicit --environment. 2021-11-20 GDB Administrator Automatic date update in version.in 2021-11-19 H.J. Lu elfedit: Align --[in|out]put-abiversion usage Align --input-abiversion [0-255] Set input ABIVERSION --output-abiversion [0-255] Set output ABIVERSION instead of --input-abiversion [0-255] Set input ABIVERSION --output-abiversion [0-255] Set output ABIVERSION * elfedit.c (usage): Align --[in|out]put-abiversion usage. 2021-11-19 Tom de Vries [gdb/testsuite] Handle runto fail in gdb.mi/mi-var-cp.exp On OBS I ran into: ... PASS: gdb.mi/mi-var-cp.exp: run to mi-var-cp.cc:81 (set breakpoint) UNRESOLVED: gdb.mi/mi-var-cp.exp: unable to start target ... followed by 81 FAILs and two more UNRESOLVEDs. I didn't manage to reproduce this, but I did notice that the initial problem causing the UNRESOLVED caused all subsequent UNRESOLVEDs and FAILs. I emulated the problem by commenting out the send_gdb "run\n" in mi_run_cmd_full. Fix this by: - handling mi_run_cmd failure in mi_get_inline_test - handling mi_run_inline_test failure in gdb.mi/mi-var-cp.exp, and other test-cases using mi_get_inline_test Tested on x86_64-linux. 2021-11-19 Tom de Vries [gdb/testsuite] Fix 64-bit dwarf test-cases with -m32 When running test-case gdb.dwarf2/loc-sec-offset.exp with target board -m32, I run into: ... builtin_spawn -ignore SIGHUP gcc -fno-stack-protector -m32 \ -fdiagnostics-color=never -c -o loc-sec-offset-dw641.o \ loc-sec-offset-dw64.S^M as: loc-sec-offset-dw641.o: unsupported relocation type: 0x1^M loc-sec-offset-dw64.S: Assembler messages:^M loc-sec-offset-dw64.S:29: Error: cannot represent relocation type \ BFD_RELOC_64^M ... Looking at line 29, we have: ... .8byte .Labbrev1_begin /* Abbrevs */ ... It would be nice if the assembler could handle this somehow. But I guess it's not unreasonable that an assembler for a 32-bit architecture will object to handling 64-bit labels. Instead, work around this in the dwarf assembler by emitting: ... .4byte .Labbrev1_begin /* Abbrevs (lsw) */ .4byte 0 /* Abbrevs (msw) */ ... Tested on x86_64-linux with target board unix/-m32. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28383 2021-11-19 Tom de Vries [gdb/testsuite] Fix gdb.threads/thread-specific-bp.exp On OBS I ran into a failure in test-case gdb.threads/thread-specific-bp.exp: ... (gdb) PASS: gdb.threads/thread-specific-bp.exp: non-stop: continue to end info breakpoint^M Num Type Disp Enb Address What^M 1 breakpoint keep y 0x0000555555555167 in main at $src:36^M breakpoint already hit 1 time^M 2 breakpoint keep y 0x0000555555555151 in start at $src:23^M breakpoint already hit 1 time^M 3 breakpoint keep y 0x0000555555555167 in main at $src:36 thread 2^M stop only in thread 2^M 4 breakpoint keep y 0x000055555555515c in end at $src:29^M breakpoint already hit 1 time^M (gdb) [Thread 0x7ffff7db1640 (LWP 19984) exited]^M Thread-specific breakpoint 3 deleted - thread 2 no longer in the thread list.^M FAIL: gdb.threads/thread-specific-bp.exp: non-stop: \ thread-specific breakpoint was deleted (timeout) ... Fix this by waiting for the "[Thread 0x7ffff7db1640 (LWP 19984) exited]" message before issuing the "info breakpoint command". Tested on x86_64-linux. 2021-11-19 Christina Schimpe gdb/testsuite: Extend tests for print of cv qualifiers This commit supplements whatis and ptype command tests for print of const-volatile qualifiers. gdb/testsuite/ChangeLog: 2021-11-16 Christina Schimpe * gdb.cp/ptype-cv-cp.cc: New const and volatile typedef variables. * gdb.cp/ptype-cv-cp.exp: Add new tests. 2021-11-19 Christina Schimpe gdb: Print cv qualifiers if class attributes are substituted Make ptype print const/volatile qualifiers when template or typedef attributes are substituted. For a programm like ~~~ template class Cfoo { typedef float myfloat; public: DataT me0; const DataT me1=1; const myfloat me2=2.0; }; int main() { Cfoo cfoo; return 0; } ~~~ gdb outputs the following type for cfoo's attributes: ~~~ (gdb) b 14 Breakpoint 1 at 0x1170: file tmp.cc, line 14. (gdb) run Starting program: /tmp Breakpoint 1, main () at tmp.cc:14 14 return 0; (gdb) ptype cfoo type = class Cfoo [with DataT = int] { public: DataT me0; DataT me1; myfloat me2; private: typedef float myfloat; } ~~~ The cv qualifiers (const in this case) are ignored for me1 and me2. After: ~~~ (gdb) ptype cfoo type = class Cfoo [with DataT = int] { public: DataT me0; const DataT me1; const myfloat me2; private: typedef float myfloat; } ~~~ gdb/ChangeLog: 2021-11-16 Christina Schimpe * gdb/c-typeprint.c: Print cv qualifiers in case of parameter substitution. gdb/testsuite/ChangeLog: 2021-11-16 Christina Schimpe * gdb.cp/templates.cc: New template class Cfoo with const, template, typdef and integer attributes. * gdb.cp/templates.exp: Add new test using ptype and ptype/r commmands for template class CFoo. 2021-11-19 Nelson Chu RISC-V: Support new .option arch directive. https://github.com/riscv/riscv-asm-manual/pull/67 Format: .option arch, +, ... .option arch, - .option arch, = The new direcitve is used to enable/disable extensions for the specific code region. For example, .attribute arch, "rv64ic" # arch = rv64i2p0_c2p0 .option push .option arch, +d2p0, -c # arch = rv64i2p0_f2p0_d2p0, f is added implied .option arch, =rv32gc # arch = rv32i2p0_m2p0_a2p0_f2p0_d2p0_c2p0 .option pop # arch = rv64i2p0_c2p0 Note that, 1. ".option rvc/norvc" have the same behavior as ".option arch +c/-c". 2. ".option arch -i" is illegal, since we cannot remove base i extension. 3. If arch=rv64i2p0, then ".option arch, +i3p0" will update the i's version from 2.0 to 3.0. 4. If arch=rv64i3p0, then ".option arch, +i" will update the i's version from 2.0 to the default one according to the chosen isa spec. bfd/ * elfxx-riscv.c (riscv_add_subset): If the subset is already added, and the new versions are not RISCV_UNKNOWN_VERSION, then update the versions to the subset list. (riscv_copy_subset): New function. Copy the subset from list. (riscv_copy_subset_list): New function. Return the new copyed list. (riscv_update_subset): Updated to make .option arch directives workable. * elfxx-riscv.h: Updated. gas/ * config/tc-riscv.c (riscv_subsets): Defined as a pointer. (riscv_rps_as): Init the subset_list to NULL, we will set it later once riscv_opts_stack is created or updated. (struct riscv_option_stack, riscv_opts_stack): Moved forward. (riscv_set_arch): Updated. (s_riscv_option): Support new .option arch directive, to add, remove or update subsets for the specific code region. (riscv_write_out_attrs): Updated. * doc/c-riscv.texi: Added document for new .option arch directive. * testsuite/gas/riscv/option-arch-01a.d: New testcase. * testsuite/gas/riscv/option-arch-01b.d: Likewise. * testsuite/gas/riscv/option-arch-01.s: Likewise.. * testsuite/gas/riscv/option-arch-02.d: Likewise. * testsuite/gas/riscv/option-arch-02.s: Likewise. * testsuite/gas/riscv/option-arch-fail.d: Likewise. * testsuite/gas/riscv/option-arch-fail.l: Likewise. * testsuite/gas/riscv/option-arch-fail.s: Likewise. 2021-11-19 Alan Modra Re: Add multibyte character warning option to the assembler. On hppa*-hp-hpux* run_dump_test edits the test file, adjusting .comm directives to suit those target's unusual syntax. Thus gas is passed a temporary file name. * testsuite/gas/all/multibyte1.l: Ignore file name. 2021-11-19 Mike Frysinger sim: install various doc files 2021-11-19 Nelson Chu RISC-V: Support STO_RISCV_VARIANT_CC and DT_RISCV_VARIANT_CC. This is the original discussion, https://github.com/riscv/riscv-elf-psabi-doc/pull/190 And here is the glibc part, https://sourceware.org/pipermail/libc-alpha/2021-August/129931.html For binutils part, we need to support a new direcitve: .variant_cc. The function symbol marked by .variant_cc means it need to be resolved directly without resolver for dynamic linker. We also add a new dynamic entry, STO_RISCV_VARIANT_CC, to indicate there are symbols with the special attribute in the dynamic symbol table of the object. I heard that llvm already have supported this in their mainline, so I think it's time to commit this. bfd/ * elfnn-riscv.c (riscv_elf_link_hash_table): Added variant_cc flag. It is used to check if relocations for variant CC symbols may be present. (allocate_dynrelocs): If the symbol has STO_RISCV_VARIANT_CC flag, then raise the variant_cc flag of riscv_elf_link_hash_table. (riscv_elf_size_dynamic_sections): Added dynamic entry for variant_cc. (riscv_elf_merge_symbol_attribute): New function, used to merge non-visibility st_other attributes, including STO_RISCV_VARIANT_CC. binutils/ * readelf.c (get_riscv_dynamic_type): New function. (get_dynamic_type): Called get_riscv_dynamic_type for riscv targets. (get_riscv_symbol_other): New function. (get_symbol_other): Called get_riscv_symbol_other for riscv targets. gas/ * config/tc-riscv.c (s_variant_cc): Marked symbol that it follows a variant CC convention. (riscv_elf_copy_symbol_attributes): Same as elf_copy_symbol_attributes, but without copying st_other. If a function symbol has special st_other value set via directives, then attaching an IFUNC resolver to that symbol should not override the st_other setting. (riscv_pseudo_table): Support variant_cc diretive. * config/tc-riscv.h (OBJ_COPY_SYMBOL_ATTRIBUTES): Defined. * testsuite/gas/riscv/variant_cc-set.d: New testcase. * testsuite/gas/riscv/variant_cc-set.s: Likewise. * testsuite/gas/riscv/variant_cc.d: Likewise. * testsuite/gas/riscv/variant_cc.s: Likewise. include/ * elf/riscv.h (DT_RISCV_VARIANT_CC): Defined to (DT_LOPROC + 1). (STO_RISCV_VARIANT_CC): Defined to 0x80. ld/ * testsuite/ld-riscv-elf/variant_cc-1.s: New testcase. * testsuite/ld-riscv-elf/variant_cc-2.s: Likewise. * testsuite/ld-riscv-elf/variant_cc-now.d: Likewise. * testsuite/ld-riscv-elf/variant_cc-r.d: Likewise. * testsuite/ld-riscv-elf/variant_cc-shared.d: Likewise. * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated. 2021-11-19 Mike Frysinger sim: use program_transform_name for libsim Instead of always using target_alias as a prefix on the name, use program_transform_name instead so that the library is scoped in the same way as the run program. sim: avoid installing headers when there is no sim If we aren't building any sims, don't install the sim headers as they won't be useful to anyone. 2021-11-19 GDB Administrator Automatic date update in version.in 2021-11-18 Kevin Buettner dprintf-execution-x-script.exp: Adjust test for native-extended-gdbserver Without this commit, doing... make check RUNTESTFLAGS="--target_board=native-extended-gdbserver" \ TESTS="gdb.base/dprintf-execution-x-script.exp" ...will show one failure. Here's a snippet from gdb.log showing the circumstances - I've trimmed the paths for readability: builtin_spawn gdb -nw -nx -data-directory data-directory -iex set height 0 -iex set width 0 -iex set auto-connect-native-target off -iex set sysroot -ex set height unlimited -x testsuite/gdb.base/dprintf-execution-x-script.gdb --args testsuite/outputs/gdb.base/dprintf-execution-x-script/dprintf-execution-x-script ... Reading symbols from testsuite/outputs/gdb.base/dprintf-execution-x-script/dprintf-execution-x-script... Dprintf 1 at 0x40116e: file testsuite/gdb.base/dprintf-execution-x-script.c, line 38. Breakpoint 2 at 0x40113a: file testsuite/gdb.base/dprintf-execution-x-script.c, line 26. testsuite/gdb.base/dprintf-execution-x-script.gdb:21: Error in sourced command file: Don't know how to run. Try "help target". (gdb) FAIL: gdb.base/dprintf-execution-x-script.exp: load and run script with -x ... GNU gdb (GDB) 12.0.50.20211118-git Copyright (C) 2021 Free Software Foundation, Inc. ... (gdb) set height 0 (gdb) set width 0 (gdb) builtin_spawn gdbserver/gdbserver --once --multi localhost:2346 Listening on port 2346 target extended-remote localhost:2346 Remote debugging using localhost:2346 ... [Tests after this point will pass.] Note that the command which spawns gdb prevents the gdb script from using the native target via "-iex set auto-connect-native-target off". Moreover, the script in question contains a "run" command, so GDB doesn't know how to run (since it's prevented from using the native target and no alternate "target" command has been issued. But, once GDB finishes starting up, the test will spawn a gdbserver and then connect to it. The other (two) tests after this point both pass. I've fixed this by using gdb_test_multiple instead of gdb_test. When a "Don't know how to run message" is received, the test is unsupported. I've also added a comment explaining the reason for needing to check for "Don't know how to run" despite bailing out at the top of the test via: if ![target_can_use_run_cmd] { return 0 } 2021-11-18 Simon Marchi gdb: fix array-view-selftests.c build with g++ 4.8 When building with g++ 4.8, I get: CXX unittests/array-view-selftests.o /home/smarchi/src/binutils-gdb/gdb/unittests/array-view-selftests.c:123:42: error: expected 'class' before 'Container' template typename Container> ^ I am no C++ template expert, but it looks like if I change "typename" for "class", as the compiler kind of suggests, the code compiles. Change-Id: I9c3edd29fb2b190069f0ce0dbf3bc3604d175f48 2021-11-18 Simon Marchi gdb: fix ia64-tdep.c build with g++ 4.8 When building with g++ 4.8, I get: CXX ia64-tdep.o /home/smarchi/src/binutils-gdb/gdb/ia64-tdep.c:3862:1: error: could not convert '{ia64_allocate_new_rse_frame, ia64_store_argument_in_slot, ia64_set_function_addr}' from '' to 'const ia64_infcall_ops' }; ^ This happens since commit 345bd07cce3 ("gdb: fix gdbarch_tdep ODR violation"), which added default values for ia64_infcall_ops fields. It looks like g++ 4.8 doesn't like initializing the ia64_infcall_ops object using the brace-enclosed initializer list when the ia64_infcall_ops fields are assigned default values. Later compilers don't have a problem with that, so I suppose that the code is correct, but still, change it to make gcc 4.8 happy. Don't initialize the fields of ia64_infcall_ops directly, instead default-initialize ia64_gdbarch_tdep::infcall_ops. Change-Id: I35e3a61abd7b7bbcafe6cb207078c738c5266d76 2021-11-18 Simon Marchi gdb: move AIX_TEXT_SEGMENT_BASE to rs6000-aix-tdep.c, remove rs6000-tdep.h The contents of rs6000-tdep.h (AIX_TEXT_SEGMENT_BASE) is AIX-specific, so I thought that this file should be named rs6000-aix-tdep.h. But there's already a rs6000-aix-tdep.h, so then I though AIX_TEXT_SEGMENT_BASE should simply be moved there, and rs6000-tdep.h deleted. But then I realized that AIX_TEXT_SEGMENT_BASE is only used in rs6000-aix-tdep.c, so move it to the beginning of that file. Change-Id: Ia212c6fae202f31aedb46575821cd642beeda7a3 2021-11-18 Simon Marchi gdb: rename rs6000-nat.c to rs6000-aix-nat.c This file seems to be AIX-specific, according to its contents and configure.nat. Rename it to rs6000-aix-nat.c, to make that clear (and to follow the convention). Change-Id: Ib418dddc6b79b2e28f64431121742b5e87f5f4f5 2021-11-18 Tom de Vries [gdb/doc] Fix negative repeat count examining memory example The documentation for the examining memory command x contains an example: ... You can also specify a negative repeat count to examine memory backward from the given address. For example, 'x/-3uh 0x54320' prints three halfwords (h) at 0x54314, 0x54328, and 0x5431c. ... The 0x54328 looks like a typo, which was intended to be 0x54318. But the series uses a 4-byte distance, while the halfword size used in the command means a 2-byte distance, so the series should be: ... 0x5431a, 0x5431c, and 0x5431e. ... Fix this by updating the addresses in the example accordingly. Reported here ( https://sourceware.org/pipermail/gdb/2021-November/049784.html ). 2021-11-18 Nick Clifton Add multibyte character warning option to the assembler. * as.c (parse_args): Add support for --multibyte-handling. * as.h (multibyte_handling): Declare. * app.c (scan_for_multibyte_characters): New function. (do_scrub_chars): Call the new function if multibyte warning is enabled. * input-scrub,c (input_scrub_next_buffer): Call the multibyte scanning function if multibyte warnings are enabled. * symbols.c (struct symbol_flags): Add multibyte_warned bit. (symbol_init): Call the multibyte scanning function if multibyte symbol warnings are enabled. (S_SET_SEGMENT): Likewise. * NEWS: Mention the new feature. * doc/as.texi: Document the new feature. * testsuite/gas/all/multibyte.s: New test source file. * testsuite/gas/all/multibyte1.d: New test driver file. * testsuite/gas/all/multibyte1.l: New test expected output. * testsuite/gas/all/multibyte2.d: New test driver file. * testsuite/gas/all/multibyte2.l: New test expected output. * testsuite/gas/all/gas.exp: Run the new tests. 2021-11-18 Simon Marchi gdb: include gdbarch.h in all files extending gdbarch_tdep Commit 345bd07cce33 ("gdb: fix gdbarch_tdep ODR violation") made a bunch of files define a *_gdbarch_tdep class that inherits from a gdbarch_tdep base. But some of these files don't include gdbarch.h, where gdbarch_tdep is defined. This may cause build errors if gdbarch.h isn't already included by chance by some other header file. Avoid this by making them include gdbarch.h. Change-Id: If433d302007e274daa4f656cfc94f769cf1aa68a 2021-11-18 Simon Marchi gdbsupport: make gdb_assert_not_reached accept a format string Change gdb_assert_not_reached to accept a format string plus corresponding arguments. This allows giving more precise messages. Because the format string passed by the caller is prepended with a "%s:" to add the function name, the callers can no longer pass a translated string (`_(...)`). Make the gdb_assert_not_reached include the _(), just like the gdb_assert_fail macro just above. Change-Id: Id0cfda5a57979df6cdaacaba0d55dd91ae9efee7 2021-11-18 Carl Love gdb fix for catch-syscall.exp Remove check_continue "execve" from Proc test_catch_syscall_execve. The check_continue proceedure checs that the command, execve, starts and checks for the return from the command. The execve command starts a new program and thus the return from the command causing the test to fail. The call to proc check_continue "execve" is removed and replaced with just the call to check_call_to_syscall "execve" to verify the command executed. The next test in proc test_catch_syscall_execve verifies that the new program started and hit the break point in main. Update the check for the PowerPC architecture. Power Little Endian systems include "le" in the name. The istarget "power64-*-linux*" check fails to match LE sytems. The expected string is updated to capture both Big Endian and Little Endian systems. Power 10 LE istarget prints as: powerpc64le-unknown-linux-gnu. This patch fixes three failures and the error: ERROR: can't read "arch1": no such variable Patch tested on Power 10 ppc64le GNU/Linux platform. 2021-11-18 Carl Love gdb: PowerPC fix gdb.base/break-interp.exp This patch fixes eight test failures on PowerPC for the test gdb.base/break-interp.exp. The patch adds a funtion and registers it to setup the displaced stepping for ppc-linux platform. The patch moves the struct ppc_inferior_data to the ppc-tdep.h include file to make it visible to the ppc-linux-tdep.c and rs6000-tdep.c files. Additionally the function get_ppc_per_inferior is made external in ppc-tdep.h to make it visible in both files. Tested on Power 10 ppc64le-linux with no regressions. 2021-11-18 Carl Love gdb fix PowerPC test gdb.arch/ppc-longdouble.exp The test complains of duplicate tests. DUPLICATE: gdb.arch/ppc-longdouble.exp: continue to breakpoint: return The do_test calls gdb_continue_to_breakpoint "return". The duplicates are the result of calling do_test three times with different arguments. This patch fixes the duplicate tests by adding $name to the gdb_continue_to_breakpoint argument. Patch tested on Power 10 ppc64le GNU/Linux, no duplicate tests reported, no new regression errors. 2021-11-18 H.J. Lu elf/x86: Issue an error on discarded output .plt section Issue an error, instead of crash, on discarded output .plt section. bfd/ PR ld/28597 * elf32-i386.c (elf_i386_finish_dynamic_sections): Issue an error on discarded output .plt section. * elf64-x86-64.c (elf_x86_64_finish_dynamic_sections): Likewise. ld/ PR ld/28597 * testsuite/ld-elf/pr28597.d: New file. * testsuite/ld-elf/pr28597.s: Likewise. * testsuite/ld-elf/pr28597.t: Likewise. 2021-11-18 Tom de Vries [gdb/testsuite] Add missing wait in gdb.base/signals-state-child.exp On OBS I ran into: ... (gdb) shell diff -s outputs/gdb.base/signals-state-child/standalone.txt \ outputs/gdb.base/signals-state-child/gdb.txt^M diff: outputs/gdb.base/signals-state-child/standalone.txt: \ No such file or directory^M (gdb) FAIL: gdb.base/signals-state-child.exp: signals states are identical ... I managed to reproduce this by adding "sleep (5)" at the start of main in signals-state-child.c. Fix this by waiting on the result of the spawned command. Tested on x86_64-linux. 2021-11-18 Alan Modra Re: Don't compile some opcodes files when bfd is 32-bit only Put bpf back in the 32-bit targets, even though bpf requires a 64-bit bfd. bpf sim support apparently works without being 64-bit. * Makefile.am (TARGET64_LIBOPCODES_CFILES): Move bpf files.. (TARGET32_LIBOPCODES_CFILES): ..to here. * Makefile.in: Regenerate. 2021-11-18 Alan Modra Pass DEBUGINFOD_CFLAGS when compiling dwarf.c Pick up the elfutils/debuginfod.h install location -I flags from a variable set by debuginfod.m4 (via pkg.m4 and pkg-config). * Makefile.am (DEBUGINFOD_CFLAGS): Define. (dwarf.@OBJECT@): New rule. 2021-11-18 jiawei RISC-V: Add testcases for z[fdq]inx Use gpr when the zfinx enable, the testcases contain float instructions that reuse by z[fdq]inx. gas/ChangeLog: * testsuite/gas/riscv/zdinx.d: New test. * testsuite/gas/riscv/zdinx.s: New test. * testsuite/gas/riscv/zfinx.d: New test. * testsuite/gas/riscv/zfinx.s: New test. * testsuite/gas/riscv/zqinx.d: New test. * testsuite/gas/riscv/zqinx.s: New test. Reviewed-by: Palmer Dabbelt 2021-11-18 jiawei RISC-V: Add instructions and operand set for z[fdq]inx Reuse float instructions in INSN_CLASS_F/D/Q, use riscv_subset_supports to verify if z*inx enabled and use gpr instead of fpr when z*inx is enable. bfd/ChangeLog: * elfxx-riscv.c (riscv_multi_subset_supports): Added support for z*inx extension. gas/ChangeLog: * config/tc-riscv.c (riscv_ip): Added register choice for z*inx. include/ChangeLog: * opcode/riscv.h (enum riscv_insn_class): Reused INSN_CLASS_* for z*inx. opcodes/ChangeLog: * riscv-dis.c (riscv_disassemble_insn): Added disassemble check for z*inx. * riscv-opc.c: Reused INSN_CLASS_* for z*inx. Reviewed-by: Palmer Dabbelt 2021-11-18 jiawei RISC-V: Add mininal support for z[fdq]inx Minimal support for zfinx, zdinx, zqinx. Like f/d/q, the zqinx imply zdinx and zdinx imply zfinx, where zfinx are not compatible with f/d/q. bfd/ChangeLog: * elfxx-riscv.c (riscv_implicit_subsets): Added implicit rules for z*inx extensions. (riscv_supported_std_z_ext): Added entries for z*inx. (riscv_parse_check_conflicts): Added conflict check for z*inx. Reviewed-by: Palmer Dabbelt 2021-11-18 GDB Administrator Automatic date update in version.in 2021-11-17 Przemyslaw Wirkus aarch64: [SME] SVE2 instructions added to support SME This patch is adding new SVE2 instructions added to support SME extension. The following SVE2 instructions are added by the SME architecture: * PSEL, * REVD, SCLAMP and UCLAMP. gas/ChangeLog: * config/tc-aarch64.c (parse_sme_pred_reg_with_index): New parser. (parse_operands): New parser. * testsuite/gas/aarch64/sme-9-illegal.d: New test. * testsuite/gas/aarch64/sme-9-illegal.l: New test. * testsuite/gas/aarch64/sme-9-illegal.s: New test. * testsuite/gas/aarch64/sme-9.d: New test. * testsuite/gas/aarch64/sme-9.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New operand AARCH64_OPND_SME_PnT_Wm_imm. opcodes/ChangeLog: * aarch64-asm.c (aarch64_ins_sme_pred_reg_with_index): New inserter. * aarch64-dis.c (aarch64_ext_sme_pred_reg_with_index): New extractor. * aarch64-opc.c (aarch64_print_operand): Printout of OPND_SME_PnT_Wm_imm. * aarch64-opc.h (enum aarch64_field_kind): New bitfields FLD_SME_Rm, FLD_SME_i1, FLD_SME_tszh, FLD_SME_tszl. * aarch64-tbl.h (OP_SVE_NN_BHSD): New qualifier. (OP_SVE_QMQ): New qualifier. (struct aarch64_opcode): New instructions PSEL, REVD, SCLAMP and UCLAMP. aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate. 2021-11-17 Przemyslaw Wirkus aarch64: [SME] Add new SME system registers This patch is adding miscellaneous SME related system registers. gas/ChangeLog: * testsuite/gas/aarch64/sme-sysreg.d: New test. * testsuite/gas/aarch64/sme-sysreg.s: New test. * testsuite/gas/aarch64/sme-sysreg-illegal.d: New test. * testsuite/gas/aarch64/sme-sysreg-illegal.l: New test. * testsuite/gas/aarch64/sme-sysreg-illegal.s: New test. opcodes/ChangeLog: * aarch64-opc.c: New system registers id_aa64smfr0_el1, smcr_el1, smcr_el12, smcr_el2, smcr_el3, smpri_el1, smprimap_el2, smidr_el1, tpidr2_el0 and mpamsm_el1. 2021-11-17 Przemyslaw Wirkus aarch64: [SME] Add SME mode selection and state access instructions This patch is adding new SME mode selection and state access instructions: * Add SMSTART and SMSTOP instructions. * Add SVCR system register. gas/ChangeLog: * config/tc-aarch64.c (parse_sme_sm_za): New parser. (parse_operands): New parser. * testsuite/gas/aarch64/sme-8-illegal.d: New test. * testsuite/gas/aarch64/sme-8-illegal.l: New test. * testsuite/gas/aarch64/sme-8-illegal.s: New test. * testsuite/gas/aarch64/sme-8.d: New test. * testsuite/gas/aarch64/sme-8.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New operand AARCH64_OPND_SME_SM_ZA. (enum aarch64_insn_class): New instruction classes sme_start and sme_stop. opcodes/ChangeLog: * aarch64-asm.c (aarch64_ins_pstatefield): New inserter. (aarch64_ins_sme_sm_za): New inserter. * aarch64-dis.c (aarch64_ext_imm): New extractor. (aarch64_ext_pstatefield): New extractor. (aarch64_ext_sme_sm_za): New extractor. * aarch64-opc.c (operand_general_constraint_met_p): New pstatefield value for SME instructions. (aarch64_print_operand): Printout for OPND_SME_SM_ZA. (SR_SME): New register SVCR. * aarch64-opc.h (F_REG_IN_CRM): New register endcoding. * aarch64-opc.h (F_IMM_IN_CRM): New immediate endcoding. (PSTATE_ENCODE_CRM): Encode CRm field. (PSTATE_DECODE_CRM): Decode CRm field. (PSTATE_ENCODE_CRM_IMM): Encode CRm immediate field. (PSTATE_DECODE_CRM_IMM): Decode CRm immediate field. (PSTATE_ENCODE_CRM_AND_IMM): Encode CRm and immediate field. * aarch64-tbl.h (struct aarch64_opcode): New SMSTART and SMSTOP instructions. aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate. 2021-11-17 Przemyslaw Wirkus aarch64: [SME] Add LD1x, ST1x, LDR and STR instructions This patch is adding new loads and stores defined by SME instructions. gas/ChangeLog: * config/tc-aarch64.c (parse_sme_address): New parser. (parse_sme_za_hv_tiles_operand_with_braces): New parser. (parse_sme_za_array): New parser. (output_operand_error_record): Print error details if present. (parse_operands): Support new operands. * testsuite/gas/aarch64/sme-5-illegal.d: New test. * testsuite/gas/aarch64/sme-5-illegal.l: New test. * testsuite/gas/aarch64/sme-5-illegal.s: New test. * testsuite/gas/aarch64/sme-5.d: New test. * testsuite/gas/aarch64/sme-5.s: New test. * testsuite/gas/aarch64/sme-6-illegal.d: New test. * testsuite/gas/aarch64/sme-6-illegal.l: New test. * testsuite/gas/aarch64/sme-6-illegal.s: New test. * testsuite/gas/aarch64/sme-6.d: New test. * testsuite/gas/aarch64/sme-6.s: New test. * testsuite/gas/aarch64/sme-7-illegal.d: New test. * testsuite/gas/aarch64/sme-7-illegal.l: New test. * testsuite/gas/aarch64/sme-7-illegal.s: New test. * testsuite/gas/aarch64/sme-7.d: New test. * testsuite/gas/aarch64/sme-7.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New operands. (enum aarch64_insn_class): Added sme_ldr and sme_str. (AARCH64_OPDE_UNTIED_IMMS): New operand error kind. opcodes/ChangeLog: * aarch64-asm.c (aarch64_ins_sme_za_hv_tiles): New inserter. (aarch64_ins_sme_za_list): New inserter. (aarch64_ins_sme_za_array): New inserter. (aarch64_ins_sme_addr_ri_u4xvl): New inserter. * aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): Added ins_sme_za_list, ins_sme_za_array and ins_sme_addr_ri_u4xvl. * aarch64-dis.c (aarch64_ext_sme_za_hv_tiles): New extractor. (aarch64_ext_sme_za_list): New extractor. (aarch64_ext_sme_za_array): New extractor. (aarch64_ext_sme_addr_ri_u4xvl): New extractor. * aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): Added ext_sme_za_list, ext_sme_za_array and ext_sme_addr_ri_u4xvl. * aarch64-opc.c (operand_general_constraint_met_p): (aarch64_match_operands_constraint): Handle sme_ldr, sme_str and sme_misc. (aarch64_print_operand): New operands supported. * aarch64-tbl.h (OP_SVE_QUU): New qualifier. (OP_SVE_QZU): New qualifier. aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate. 2021-11-17 Przemyslaw Wirkus aarch64: [SME] Add ZERO instruction This patch is adding ZERO (a list of 64-bit element ZA tiles) instruction. gas/ChangeLog: * config/tc-aarch64.c (parse_sme_list_of_64bit_tiles): New parser. (parse_operands): Handle OPND_SME_list_of_64bit_tiles. * testsuite/gas/aarch64/sme-4-illegal.d: New test. * testsuite/gas/aarch64/sme-4-illegal.l: New test. * testsuite/gas/aarch64/sme-4-illegal.s: New test. * testsuite/gas/aarch64/sme-4.d: New test. * testsuite/gas/aarch64/sme-4.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New operand AARCH64_OPND_SME_list_of_64bit_tiles. opcodes/ChangeLog: * aarch64-opc.c (print_sme_za_list): New printing function. (aarch64_print_operand): Handle OPND_SME_list_of_64bit_tiles. * aarch64-opc.h (enum aarch64_field_kind): New bitfield FLD_SME_zero_mask. * aarch64-tbl.h (struct aarch64_opcode): New ZERO instruction. aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate. 2021-11-17 Przemyslaw Wirkus aarch64: [SME] Add MOV and MOVA instructions This patch is adding new MOV (alias) and MOVA SME instruction. gas/ChangeLog: * config/tc-aarch64.c (enum sme_hv_slice): new enum. (struct reloc_entry): Added ZAH and ZAV registers. (parse_sme_immediate): Immediate parser. (parse_sme_za_hv_tiles_operand): ZA tile parser. (parse_sme_za_hv_tiles_operand_index): Index parser. (parse_operands): Added ZA tile parser calls. (REGNUMS): New macro. Regs with suffix. (REGSET16S): New macro. 16 regs with suffix. * testsuite/gas/aarch64/sme-2-illegal.d: New test. * testsuite/gas/aarch64/sme-2-illegal.l: New test. * testsuite/gas/aarch64/sme-2-illegal.s: New test. * testsuite/gas/aarch64/sme-2.d: New test. * testsuite/gas/aarch64/sme-2.s: New test. * testsuite/gas/aarch64/sme-2a.d: New test. * testsuite/gas/aarch64/sme-2a.s: New test. * testsuite/gas/aarch64/sme-3-illegal.d: New test. * testsuite/gas/aarch64/sme-3-illegal.l: New test. * testsuite/gas/aarch64/sme-3-illegal.s: New test. * testsuite/gas/aarch64/sme-3.d: New test. * testsuite/gas/aarch64/sme-3.s: New test. * testsuite/gas/aarch64/sme-3a.d: New test. * testsuite/gas/aarch64/sme-3a.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New enums AARCH64_OPND_SME_ZA_HV_idx_src and AARCH64_OPND_SME_ZA_HV_idx_dest. (struct aarch64_opnd_info): New ZA tile vector struct. opcodes/ChangeLog: * aarch64-asm.c (aarch64_ins_sme_za_hv_tiles): New inserter. * aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): New inserter ins_sme_za_hv_tiles. * aarch64-dis.c (aarch64_ext_sme_za_hv_tiles): New extractor. * aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): New extractor ext_sme_za_hv_tiles. * aarch64-opc.c (aarch64_print_operand): Handle SME_ZA_HV_idx_src and SME_ZA_HV_idx_dest. * aarch64-opc.h (enum aarch64_field_kind): New enums FLD_SME_size_10, FLD_SME_Q, FLD_SME_V and FLD_SME_Rv. (struct aarch64_operand): Increase fields size to 5. * aarch64-tbl.h (OP_SME_BHSDQ_PM_BHSDQ): New qualifiers aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate. 2021-11-17 Przemyslaw Wirkus aarch64: [SME] Add SME instructions Patch is adding new SME matrix instructions. Please note additional instructions will be added in following patches. gas/ChangeLog: * config/tc-aarch64.c (parse_sme_zada_operand): New parser. * config/tc-aarch64.c (parse_reg_with_qual): New reg parser. * config/tc-aarch64.c (R_ZA): New egister type. (parse_operands): New parser. * testsuite/gas/aarch64/sme-illegal.d: New test. * testsuite/gas/aarch64/sme-illegal.l: New test. * testsuite/gas/aarch64/sme-illegal.s: New test. * testsuite/gas/aarch64/sme.d: New test. * testsuite/gas/aarch64/sme.s: New test. * testsuite/gas/aarch64/sme-f64.d: New test. * testsuite/gas/aarch64/sme-f64.s: New test. * testsuite/gas/aarch64/sme-i64.d: New test. * testsuite/gas/aarch64/sme-i64.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New operands AARCH64_OPND_SME_ZAda_2b, AARCH64_OPND_SME_ZAda_3b and AARCH64_OPND_SME_Pm. (enum aarch64_insn_class): New instruction class sme_misc. opcodes/ChangeLog: * aarch64-opc.c (aarch64_print_operand): Print OPND_SME_ZAda_2b and OPND_SME_ZAda_3b operands. (verify_constraints): Handle OPND_SME_Pm. * aarch64-opc.h (enum aarch64_field_kind): New bit fields FLD_SME_ZAda_2b, FLD_SME_ZAda_3b and FLD_SME_Pm. * aarch64-tbl.h (OP_SME_ZADA_PN_PM_ZN_S): New qualifier set. (OP_SME_ZADA_PN_PM_ZN_D): New qualifier. (OP_SME_ZADA_PN_PM_ZN_ZM): New qualifier. (OP_SME_ZADA_S_PM_PM_S_S): New qualifier. (OP_SME_ZADA_D_PM_PM_D_D): New qualifier. (OP_SME_ZADA_S_PM_PM_H_H): New qualifier. (OP_SME_ZADA_S_PM_PM_B_B): New qualifier. (OP_SME_ZADA_D_PM_PM_H_H): New qualifier. (SME_INSN): New instruction macro. (SME_F64_INSN): New instruction macro. (SME_I64_INSN): New instruction macro. (SME_INSNC): New instruction macro. (struct aarch64_opcode): New SME instructions. aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate. 2021-11-17 Przemyslaw Wirkus aarch64: [SME] Add +sme option to -march This series of patches (tagged [SME]) add support for the Scalable Matrix Extension. Patch introduces new command line options: +sme, +sme-f64 and +sme-i64 to -march command line options. gas/ChangeLog: * NEWS: Updated docs. * config/tc-aarch64.c: New SME command line options. * doc/c-aarch64.texi: Update docs. include/ChangeLog: * opcode/aarch64.h (AARCH64_FEATURE_SME): New flag. (AARCH64_FEATURE_SME_F64): New flag. (AARCH64_FEATURE_SME_I64): New flag. opcodes/ChangeLog: * aarch64-tbl.h (SME): New feature object. 2021-11-17 Jeremy Drake Set the default DLL chracteristics to 0 for Cygwin based targets. * emultempl/pep.em (DEFAULT_DLL_CHARACTERISTICS): Set to 0 for Cygwin targets. * emultempl/pep.em (DEFAULT_DLL_CHARACTERISTICS): Likewise. 2021-11-17 Nick Clifton Fix the linker script parser so that it will recognise the PT_GNU_RELRO segment type, and the linker itself so that it will gracefully handle being unable to assign any sections to such a segment. PR 28452 bfd * elf.c (assign_file_positions_for_non_load_sections): Replace assertion with a warning message. ld * ldgram.y: Add support for PT_GNU_RELRO and PT_GNU_PROPERTY. * ldgram.c: Regenerate. 2021-11-17 Andreas Arnez [gdb/build, s390x] Fix build after gdbarch_tdep changes Commit 345bd07cce33 ("gdb: fix gdbarch_tdep ODR violation") changes a declaration in s390-tdep.h from struct gdbarch_tdep { ... }; to struct s390_gdbarch_tdep : gdbarch_tdep { ... }; and now requires that gdbarch_tdep has been declared before. Which is usually the case, except when compiling s390-linux-nat.c, where s390-tdep.h is included before gdbarch.h. Thus the s390x build errors out with the compiler complaining about a missing class name after the colon. Fix this in s390-linux-nat.c, by including gdbarch.h before s390-tdep.h. 2021-11-17 Luis Machado Expose the BTI BTYPE more explicitly in the registers Augment the register description XML to expose the BTI BTYPE field contained in the CPSR register. It will be displayed like so: cpsr 0x60001000 [ EL=0 BTYPE=0 SSBS C Z ] 2021-11-17 H.J. Lu elfedit: Add --output-abiversion option to update ABIVERSION * NEWS: Mention --output-abiversion. * elfedit.c (input_elf_abiversion): New. (output_elf_abiversion): Likewise. (update_elf_header): Update EI_ABIVERSION. (command_line_switch): Add OPTION_INPUT_ABIVERSION and OPTION_OUTPUT_ABIVERSION. (options): Add --input-abiversion and --output-abiversion. (usage): Likewise. (main): Handle --input-abiversion and --output-abiversion. * doc/binutils.texi: Document --input-abiversion and --output-abiversion. * testsuite/binutils-all/elfedit.exp: Run elfedit-6. * testsuite/binutils-all/elfedit-6.d: New file. 2021-11-17 Nelson Chu RISC-V: Support rvv extension with released version 1.0. 2021-11-17 Jim Wilson Kito Cheng Nelson Chu This patch is porting from the following riscv github, https://github.com/riscv/riscv-binutils-gdb/tree/rvv-1.0.x And here is the vector spec, https://github.com/riscv/riscv-v-spec bfd/ * elfxx-riscv.c (riscv_implicit_subsets): Added imply rules of v, zve and zvl extensions. (riscv_supported_std_ext): Updated verison of v to 1.0. (riscv_supported_std_z_ext): Added zve and zvl extensions. (riscv_parse_check_conflicts): The zvl extensions need to enable either v or zve extension. (riscv_multi_subset_supports): Check the subset list to know if the INSN_CLASS_V and INSN_CLASS_ZVEF instructions are supported. gas/ * config/tc-riscv.c (enum riscv_csr_class): Added CSR_CLASS_V. (enum reg_class): Added RCLASS_VECR and RCLASS_VECM. (validate_riscv_insn): Check whether the rvv operands are valid. (md_begin): Initialize register hash for rvv registers. (macro_build): Added rvv operands when expanding rvv pseudoes. (vector_macro): Expand rvv macros into one or more instructions. (macro): Likewise. (my_getVsetvliExpression): Similar to my_getVsetvliExpression, but used for parsing vsetvli operands. (riscv_ip): Parse and encode rvv operands. Besides, The rvv loads and stores with EEW 64 cannot be used when zve32x is enabled. * testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Updated -march to rv32ifv_zkr. * testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise. * testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise. * testsuite/gas/riscv/priv-reg.s: Added rvv csr testcases. * testsuite/gas/riscv/priv-reg-version-1p10.d: Likewise. * testsuite/gas/riscv/priv-reg-version-1p11.d: Likewise. * testsuite/gas/riscv/priv-reg-version-1p9p1.d: Likewise. * testsuite/gas/riscv/march-imply-v.d: New testcase. * testsuite/gas/riscv/vector-insns-fail-zve32xf.d: Likewise. * testsuite/gas/riscv/vector-insns-fail-zve32xf.l: Likewise. * testsuite/gas/riscv/vector-insns-fail-zvl.d: Likewise. * testsuite/gas/riscv/vector-insns-fail-zvl.l: Likewise. * testsuite/gas/riscv/vector-insns-vmsgtvx.d: Likewise. * testsuite/gas/riscv/vector-insns-vmsgtvx.s: Likewise. * testsuite/gas/riscv/vector-insns-zero-imm.d: Likewise. * testsuite/gas/riscv/vector-insns-zero-imm.s: Likewise. * testsuite/gas/riscv/vector-insns.d: Likewise. * testsuite/gas/riscv/vector-insns.s: Likewise. include/ * opcode/riscv-opc.h: Defined mask/match encodings and csrs for rvv. * opcode/riscv.h: Defined rvv immediate encodings and fields. (enum riscv_insn_class): Added INSN_CLASS_V and INSN_CLASS_ZVEF. (INSN_V_EEW64): Defined. (M_VMSGE, M_VMSGEU): Added for the rvv pseudoes. opcodes/ * riscv-dis.c (print_insn_args): Dump the rvv operands. * riscv-opc.c (riscv_vecr_names_numeric): Defined rvv registers. (riscv_vecm_names_numeric): Likewise. (riscv_vsew): Likewise. (riscv_vlmul): Likewise. (riscv_vta): Likewise. (riscv_vma): Likewise. (match_vs1_eq_vs2): Added for rvv Vu operand. (match_vd_eq_vs1_eq_vs2): Added for rvv Vv operand. (riscv_opcodes): Added rvv v1.0 instructions. 2021-11-17 Sergei Trofimovich gdb/nat/linux-osdata.c: fix build on gcc-12 (string overfow) On gcc-12 build fails as: ../../gdbserver/../gdb/nat/linux-osdata.c: In function 'void linux_xfer_osdata_processes(buffer*)': ../../gdbserver/../gdb/nat/linux-osdata.c:330:39: error: '__builtin___sprintf_chk' may write a terminating nul past the end of the destination [-Werror=format-overflow=] 330 | sprintf (core_str, "%d", i); | ^ It's an off-by-one case in an infeasible scenario for negative huge core count. The change switches to std::string for memory handling. Tested by running 'info os processes' and checking CPU cores column. 2021-11-17 Aaron Merey gdb: Add aliases for read_core_file_mappings callbacks Add aliases read_core_file_mappings_loop_ftype and read_core_file_mappings_pre_loop_ftype. Intended for use with read_core_file_mappings. Also add build_id parameter to read_core_file_mappings_loop_ftype. 2021-11-17 Mike Frysinger sim: testsuite: add support for $pwd replacements Extend the common test framework to support $pwd replacements in settings. This allows replacing the custom cris @exedir@ with it. sim: cris: replace @srcdir@ test extension with $srcdir/$subdir The common framework supports $srcdir & $subdir replacements already, so replace the custom @srcdir@ logic with those. Since the replace happens in slurp_options that cris already uses, we don't have any logic to port over there. We have to duplicate that into the cris slurp_rv helper though. 2021-11-17 Mike Frysinger sim: cris: drop custom "dynamic" test field This tag is used to force tests to be built dynamically (i.e. without -static linking). This is because cris-sim.exp in dejagnu turns on static linking in ldflags. The default configs and runtest flags shouldn't load these boards. If these settings are still needed, we should figure out a different way of suppressing the stock settings wholesale. We want these to all pass out of the box with little to no configuration so that they can run in a multitarget build. With dropping "dynamic", it'll be easier to merge the custom cris test logic with the common sim test logic. 2021-11-17 Mike Frysinger sim: testsuite: add more silent build rules site.exp is still verbose, but that comes from automake, so have to get it fixed upstream. 2021-11-17 GDB Administrator Automatic date update in version.in 2021-11-16 Sergei Trofimovich sim: cr16: fix build on gcc-12 (NULL comparison) On gcc-12 build fails as: sim/cr16/interp.c: In function 'lookup_hash': sim/cr16/interp.c:89:25: error: the comparison will always evaluate as 'true' for the address of 'mnimonic' will never be NULL [-Werror=address] 89 | if ((h->ops->mnimonic != NULL) && | ^~ 'mnimonic' is a sharr array within ops. It can never be NULL. While at it renamed 'mnimonic' to 'mnemonic'. 2021-11-16 Simon Marchi gdb: fix length of array view returned by some value_contents functions In commit 50888e42dcd3 ("gdb: change functions returning value contents to use gdb::array_view"), I believe I made a mistake with the length of the array views returned by some functions. All functions return a view of `TYPE_LENGTH (value_type (type))` length. This is not correct when the value's enclosing type is larger than the value's type. In that case, the value's contents buffer is of the size of the enclosing type, and the value's actual contents is a slice of that (as returned by value_contents). So, functions value_contents_all_raw, value_contents_for_printing and value_contents_for_printing_const are not correct. Since they are meant to return the value's contents buffer as a whole, they should have the size of the enclosing type. There is nothing that uses the returned array view size at the moment, so this didn't cause a problem. But it became apparent when trying to adjust some callers. Change-Id: Ib4e8837e1069111d2b2784d3253d5f3002419e68 2021-11-16 Fangrui Song readelf: Support SHT_RELR/DT_RELR for -r The -r output for SHT_RELR looks like: Relocation section '.relr.dyn' at offset 0x530 contains 4 entries: 7 offsets 00000000000028c0 00000000000028c8 0000000000003ad0 0000000000003ad8 0000000000003ae0 0000000000003ae8 0000000000003af0 For --use-dynamic, the header looks like 'RELR' relocation section at offset 0x530 contains 32 bytes: include/ * elf/common.h (DT_ENCODING): Bump to 38. * elf/external.h (Elf32_External_Relr): New. (Elf64_External_Relr): New. binutils/ * readelf.c (enum relocation_type): New. (slurp_relr_relocs): New. (dump_relocations): Change is_rela to rel_type. Dump RELR. (dynamic_relocations): Add DT_RELR. (process_relocs): Check SHT_RELR and DT_RELR. (process_dynamic_section): Store into dynamic_info for DT_RELR/DT_RELRENT/DT_RELRSZ. 2021-11-16 Simon Marchi gdbsupport: remove FUNCTION_NAME __func__ is standard C++11: https://en.cppreference.com/w/cpp/language/function Also, in C++11, __func__ expands to the demangled function name, so the mention in the comment above FUNCTION_NAME doesn't apply anymore. Finally, in places where FUNCTION_NAME is used, I think it's enough to print the function name, no need to print the whole signature. Therefore, I propose to just remove FUNCTION_NAME and update users to use the standard __func__. Change-Id: I778f28155422b044402442dc18d42d0cded1017d 2021-11-16 Andrew Burgess gdb/gdbsupport: make xstrprintf and xstrvprintf return a unique_ptr The motivation is to reduce the number of places where unmanaged pointers are returned from allocation type routines. All of the callers are updated. There should be no user visible changes after this commit. 2021-11-16 Andrew Burgess gdbsupport: move xfree into its own file In the next commit I'd like to reference gdb_unique_ptr within the common-utils.h file. However, this requires that I include gdb_unique_ptr.h, which requires that xfree be defined. Interestingly, gdb_unique_ptr.h doesn't actually include anything that defines xfree, but I was finding that when I added a gdb_unique_ptr.h include to common-utils.h I was getting a dependency cycle; before my change xfree was defined when gdb_unique_ptr.h was processed, while after my change it was not, and this made g++ unhappy. To break this cycle, I propose to move xfree into its own header file, gdb-xfree.h, which I'll then include into gdb_unique_ptr.h and common-utils.cc. 2021-11-16 Andrew Burgess gdb: throw OPTIMIZED_OUT_ERROR rather than GENERIC_ERROR While reviewing this patch: https://sourceware.org/pipermail/gdb-patches/2021-November/183227.html I spotted that the patch could be improved if we threw OPTIMIZED_OUT_ERROR rather than GENERIC_ERROR in a few places. This commit updates error_value_optimized_out and require_not_optimized_out to throw OPTIMIZED_OUT_ERROR. I ran the testsuite and saw no regressions. This doesn't really surprise me, we don't usually write code like: catch (const gdb_exception_error &ex) { (if ex.error == GENERIC_ERROR) ... else ... } There are a three places where we write something like: catch (const gdb_exception_error &ex) { (if ex.error == OPTIMIZED_OUT_ERROR) ... } In frame.c:unwind_pc, stack.c:info_frame_command_core, and value.c:value_optimized_out, but if we are hitting these cases then it's not significantly changing GDB's behaviour. 2021-11-16 Tom Tromey Remove config.cache in gdbserver's "distclean" PR gdb/28586 points out that "make distclean" fails to delete config.cache from gdbserver/. This patch fixes the bug, and removes a duplicate "Makefile" deletion that was also pointed out in the PR. 2021-11-16 Tom de Vries [gdb/testsuite] Remove inferior output in gdb.base/foll-vfork.exp Test-case gdb.base/foll-vfork.exp has inferior output that is not needed, but which makes the regexp matching more difficult (see commit 1f28b70def1 "[gdb/testsuite] Fix regexp in gdb.base/foll-vfork.exp"). Remove the inferior output, and revert commit 1f28b70def1 to make the matching more restrictive. Tested on x86_64-linux. 2021-11-16 H.J. Lu x86: Don't allow KMOV in TLS code sequences Don't allow KMOV in TLS code sequences which require integer MOV instructions. PR target/28595 * config/tc-i386.c (match_template): Don't allow KMOV in TLS code sequences. * testsuite/gas/i386/i386.exp: Run inval-tls and x86-64-inval-tls tests. * testsuite/gas/i386/inval-tls.l: New file. * testsuite/gas/i386/inval-tls.s: Likewise. * testsuite/gas/i386/x86-64-inval-tls.l: Likewise. * testsuite/gas/i386/x86-64-inval-tls.s: Likewise. 2021-11-16 Mike Frysinger sim: run: support concise env var settings Support the same syntax as other common utilities where env vars can be specified before the program to be run without an explicit option. This behavior can be suppressed by using the -- marker. 2021-11-16 Mike Frysinger sim: nrun: add --env-{set,unset,clear} command line options Provide explicit control over the program's environment with the basic set/unset/clear options. These are a bit clunky to use, but they're functional. The env set operation is split out into a separate function as it'll be used in the next commit. With these in place, we can adjust the custom cris testsuite to use the now standard options and not its one-off hack. 2021-11-16 Mike Frysinger sim: syscall: hoist argc/argn/argnlen to common code Now that the callback framework supports argv & envp, we can move the Blackfin implementation of these syscalls to the common code. sim: syscall: fix argvlen & argv implementation Now that we have access to the argv & envp strings, finish implementing these syscalls. Delete unused variables, fix tbuf by incrementing the pointer instead of setting to the length, and make sure we don't write more data than the bufsize says is available. sim: callback: expose argv & environ Pass the existing strings data to the callbacks so that common libgloss syscalls can be implemented (which we'll do shortly). 2021-11-16 Mike Frysinger sim: keep track of program environment strings We've been passing the environment strings to sim_create_inferior, but most ports don't do anything with them. A few will use ad-hoc logic to stuff the stack for user-mode programs, but that's it. Let's formalize this across the board by storing the strings in the normal sim state. This will allow (in future commits) supporting more functionality in the run interface, and to unify some of the libgloss syscalls. 2021-11-16 Mike Frysinger sim: iq2000: fix some missing prototypes warnings Turns out some of these were hiding real bugs like not passing the pc variable down. 2021-11-16 jiawei RISC-V: Scalar crypto instruction and entropy source CSR testcases. Add testcases for Scalar Crypto extension, with total testcase contain all instructions in k-ext/k-ext-64 and sub-extension testcase for zbk* zk*. Also add testcase for new CSR name 'seed' which is the Entropy Source in zkr. In fact these whole testcases can be combined into one file, after we have supported the .option arch +-= directives. gas/ * testsuite/gas/riscv/k-ext-64.d: New testcase for crypto instructions. * testsuite/gas/riscv/k-ext-64.s: Likewise. * testsuite/gas/riscv/k-ext.d: Likewise. * testsuite/gas/riscv/k-ext.s: Likewise. * testsuite/gas/riscv/zbkb-32.d: Likewise. * testsuite/gas/riscv/zbkb-32.s: Likewise. * testsuite/gas/riscv/zbkb-64.d: Likewise. * testsuite/gas/riscv/zbkb-64.s: Likewise. * testsuite/gas/riscv/zbkc-32.d: Likewise. * testsuite/gas/riscv/zbkc-64.d: Likewise. * testsuite/gas/riscv/zbkc.s: Likewise. * testsuite/gas/riscv/zbkx-32.d: Likewise. * testsuite/gas/riscv/zbkx-64.d: Likewise. * testsuite/gas/riscv/zbkx.s: Likewise. * testsuite/gas/riscv/zknd-32.d: Likewise. * testsuite/gas/riscv/zknd-32.s: Likewise. * testsuite/gas/riscv/zknd-64.d: Likewise. * testsuite/gas/riscv/zknd-64.s: Likewise. * testsuite/gas/riscv/zkne-32.d: Likewise. * testsuite/gas/riscv/zkne-32.s: Likewise. * testsuite/gas/riscv/zkne-64.d: Likewise. * testsuite/gas/riscv/zkne-64.s: Likewise. * testsuite/gas/riscv/zknh-32.d: Likewise. * testsuite/gas/riscv/zknh-32.s: Likewise. * testsuite/gas/riscv/zknh-64.d: Likewise. * testsuite/gas/riscv/zknh-64.s: Likewise. * testsuite/gas/riscv/zksed-32.d: Likewise. * testsuite/gas/riscv/zksed-64.d: Likewise. * testsuite/gas/riscv/zksed.s: Likewise. * testsuite/gas/riscv/zksh-32.d: Likewise. * testsuite/gas/riscv/zksh-64.d: Likewise. * testsuite/gas/riscv/zksh.s: Likewise. * testsuite/gas/riscv/priv-reg-fail-zkr.d: New testcase for zkr csr check. * testsuite/gas/riscv/priv-reg-fail-zkr.l: Likewise. * testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Updated march to rv32if_zkr. * testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise. * testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise. * testsuite/gas/riscv/priv-reg-version-1p10.d: Added Crypto seed csr. * testsuite/gas/riscv/priv-reg-version-1p11.d: Likewise. * testsuite/gas/riscv/priv-reg-version-1p9p1.d: Likewise. * testsuite/gas/riscv/priv-reg.s: Likewise. 2021-11-16 jiawei RISC-V: Scalar crypto instructions and operand set. Add instructions in k-ext, some instruction in zbkb, zbkc is reuse from zbb,zbc, we just change the class attribute to make them both support. The 'aes64ks1i' and 'aes64ks2' instructions are present in both the Zknd and Zkne extensions on rv64. Add new operand letter 'y' to present 'bs' symbol and 'Y' to present 'rnum' symbolc for zkn instructions. Also add a new Entropy Source CSR define 'seed' located at address 0x015. bfd/ * elfxx-riscv.c (riscv_multi_subset_supports): Added support for crypto extension. gas/ *config/tc-riscv.c (enum riscv_csr_class): Added CSR_CLASS_ZKR. (riscv_csr_address): Checked for CSR_CLASS_ZKR. (validate_riscv_insn): Added y and Y for bs and rnum operands. (riscv_ip): Handle y and Y operands. include/ * opcode/riscv-opc.h: Added encodings of crypto instructions. Also defined new csr seed, which address is 0x15. * opcode/riscv.h: Defined OP_* and INSN_CLASS_* for crypto. opcodes/ * riscv-dis.c (print_insn_args): Recognized new y and Y operands. * riscv-opc.c (riscv_opcodes): Added crypto instructions. 2021-11-16 jiawei RISC-V: Minimal support of scalar crypto extension. Minimal support of scalar crypto extension, add "k" in the riscv_supported_std_ext, to make the order check right with "zk" behind "zb". bfd/ * elfxx-riscv.c (riscv_implicit_subsets): Added implicit rules for zk* extensions. (riscv_supported_std_ext): Added entry for k. (riscv_supported_std_z_ext): Added entries for zk*. 2021-11-16 Simon Marchi gdb: rework "set debuginfod" commands As discussed here [1], do some re-work in the "set debuginfod commands". First, use "set debuginfod enabled on/off/ask" instead of "set debuginfod on/off/ask". This is more MI-friendly, and it gives an output that makes more sense in "info set", for example. Then, make the show commands not call "error" when debuginfod support is not compiled in. This makes the commands "show" and "show debuginfod" stop early, breaking gdb.base/default.exp: Running /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.base/default.exp ... FAIL: gdb.base/default.exp: info set FAIL: gdb.base/default.exp: show - Make the "debuginfod enabled" setting default to "off" when debuginfod support is not compiled in, and "ask" otherwise. - Make the setter of "debuginfod enabled" error out when debuginfod support is not compiled in, so that "debuginfod enabled" will always remain "off" in that case. - Make the setter of "debuginfod verbose" work in any case. I don't see the harm in letting the user change that setting, since the user will hit an error if they try to enable the use of debuginfod. - I would do the same for the "debuginfod urls" setter, but because this one needs to see the DEBUGINFOD_URLS_ENV_VAR macro, provided by libdebuginfod, I made that one error out as well if debuginfod support is not compiled it (otherwise, I would have left it like "debuginfod verbose". Alternatively, we could hard-code "DEBUGINFOD_URLS" in the code (in fact, it was prior to this patch, but I think it was an oversight, as other spots use DEBUGINFOD_URLS_ENV_VAR), or use a dummy string to store the setting, but I don't really see the value in that. Rename debuginfod_enable to debuginfod_enabled, just so it matches the setting name. [1] https://sourceware.org/pipermail/gdb-patches/2021-October/182937.html Change-Id: I45fdb2993f668226a5639228951362b7800f09d5 Co-Authored-By: Aaron Merey 2021-11-16 Simon Marchi gdb: adjust gdbarch_tdep calls in nat files Commit 345bd07cce33 ("gdb: fix gdbarch_tdep ODR violation") forgot to update the gdbarch_tdep calls in the native files other than x86-64 Linux. This patch updates them all (to the best of my knowledge). These are the files I was able to build-test: aarch64-linux-nat.c amd64-bsd-nat.c arm-linux-nat.c ppc-linux-nat.c windows-nat.c xtensa-linux-nat.c And these are the ones I could not build-test: aix-thread.c arm-netbsd-nat.c ppc-fbsd-nat.c ppc-netbsd-nat.c ia64-tdep.c (the part that needs libunwind) ppc-obsd-nat.c rs6000-nat.c If there are still some build problems related to gdbarch_tdep in them, they should be pretty obvious to fix. Change-Id: Iaa3d791a850e4432973757598e634e3da6061428 2021-11-16 Simon Marchi gdb: remove unused variables in xtensa-linux-nat.c While build-testing this file, the compiler complained about these two unused variables, remove them. Change-Id: I3c54f779f12c16ef6184af58aca75eaad042ce4e 2021-11-16 Simon Marchi gdb: add arc-newlib-tdep.c to ALL_TARGET_OBS This file is currently not compiled in an --enable-targets=all build, but it should be. Add it to ALL_TARGET_OBS. Update the gdbarch_tdep call that commit 345bd07cce33 ("gdb: fix gdbarch_tdep ODR violation") forgot to update. Change-Id: I86248a01493eea5e70186e9c46a298ad3994b034 2021-11-16 Jim Wilson Update my email address. I've left SiFive and have a new gmail account because it is convenient to use with git send-email. I'm planning to use this for my RISC-V work. My tuliptree address still works, it just isn't as convenient. binutils: * MAINTAINERS (RISC-V): Update my address. 2021-11-16 GDB Administrator Automatic date update in version.in 2021-11-15 Tom de Vries [gdb] Don't use gdb_stdlog for inferior-events The test-case gdb.base/foll-vfork.exp contains: ... if [gdb_debug_enabled] { untested "debug is enabled" return 0 } ... To understand what it does, I disabled this bit and ran with GDB_DEBUG=infrun, like so: ... $ cd $build/gdb/testsuite $ make check GDB_DEBUG=infrun RUNTESTFLAGS=gdb.base/foll-vfork.exp ... and ran into: ... (gdb) PASS: gdb.base/foll-vfork.exp: exec: \ vfork parent follow, through step: set follow-fork parent next^M 33 if (pid == 0) {^M (gdb) FAIL: gdb.base/foll-vfork.exp: exec: \ vfork parent follow, through step: step ... The problem is that the test-case expects: ... (gdb) PASS: gdb.base/foll-vfork.exp: exec: \ vfork parent follow, through step: set follow-fork parent next^M [Detaching after vfork from child process 28169]^M 33 if (pid == 0) {^M (gdb) PASS: gdb.base/foll-vfork.exp: exec: \ vfork parent follow, through step: step ... but the "Detaching" line has been redirected to $outputs/gdb.base/foll-vfork/gdb.debug. I looked at the documentation of "set logging debugredirect [on|off]": ... By default, GDB debug output will go to both the terminal and the logfile. Set debugredirect if you want debug output to go only to the log file. ... and my interpretation of it was that "debug output" did not match the "messages" description of inferior-events: ... The set print inferior-events command allows you to enable or disable printing of messages when GDB notices that new inferiors have started or that inferiors have exited or have been detached. ... Fix the discrepancy by not using gdb_stdlog for inferior-events. Update the gdb.base/foll-vfork.exp test-case to not require gdb_debug_enabled == 0. Tested on x86_64-linux. Tested test-case gdb.base/foll-vfork.exp with and without GDB_DEBUG=infrun. 2021-11-15 Roland McGrath ld: Fix testsuite failures under --enable-textrel-check=error ld/ * testsuite/ld-aarch64/dt_textrel.d: Pass explicit -z notext in case ld was configured with --enable-textrel-check=error. * testsuite/ld-aarch64/pr22764.d: Likewise. * testsuite/ld-aarch64/pr20402.d: Likewise. 2021-11-15 Luis Machado Extend the prologue analyzer to handle the bti instruction Handle the BTI instruction in the prologue analyzer. The patch handles all the variations of the BTI instruction. 2021-11-15 Simon Marchi gdb: fix gdbarch_tdep ODR violation I would like to be able to use non-trivial types in gdbarch_tdep types. This is not possible at the moment (in theory), because of the one definition rule. To allow it, rename all gdbarch_tdep types to _gdbarch_tdep, and make them inherit from a gdbarch_tdep base class. The inheritance is necessary to be able to pass pointers to all these _gdbarch_tdep objects to gdbarch_alloc, which takes a pointer to gdbarch_tdep. These objects are never deleted through a base class pointer, so I didn't include a virtual destructor. In the future, if gdbarch objects deletable, I could imagine that the gdbarch_tdep objects could become owned by the gdbarch objects, and then it would become useful to have a virtual destructor (so that the gdbarch object can delete the owned gdbarch_tdep object). But that's not necessary right now. It turns out that RISC-V already has a gdbarch_tdep that is non-default-constructible, so that provides a good motivation for this change. Most changes are fairly straightforward, mostly needing to add some casts all over the place. There is however the xtensa architecture, doing its own little weird thing to define its gdbarch_tdep. I did my best to adapt it, but I can't test those changes. Change-Id: Ic001903f91ddd106bd6ca09a79dabe8df2d69f3b 2021-11-15 Clément Chigot COFF: avoid modifications over C_FILE filename aux entries. Commit e86fc4a5bc37 ("PR 28447: implement multiple parameters for .file on XCOFF") introduces C_FILE entries which can store additional information. However, some modifications are needed by them but not by the original C_FILE entries, usually representing the filename. This patch ensures that filename entries are kept as is, in order to protect targets not supporting the additional entries. * coffgen.c (coff_write_symbol): Protect filename entries (coff_write_symbols): Likewise. (coff_print_symbol): Likewise. 2021-11-15 Eric Botcazou Deal with full path in .file 0 directive Gas uses the directory part, if present, of the .file 0 directive to set entry 0 of the directory table in DWARF 5, which represents the "current directory". Now Gas also uses the file part of the same directive to set entry 0 of the file table, which represents the "current compilation file". But the latter need not be located in the former so GCC will use a full path in the file part when it is passed a full path: gcc -c /full/path/test.c -save-temps yields: .file 0 "/current/directory" "/full/path/test.c" in the assembly file and: The Directory Table (offset 0x22, lines 2, columns 1): Entry Name 0 (indirect line string, offset: 0x25): /current/directory 1 (indirect line string, offset: 0x38): /full/path The File Name Table (offset 0x30, lines 2, columns 2): Entry Dir Name 0 0 (indirect line string, offset: 0x43): /full/path/test.c in the object file. Note the full path and the questionable Dir value in the 0 entry of the file table. 2021-11-15 Mike Frysinger sim: cris: make error message test a little more flexible The point of this test is to just make sure the usage text is shown, not the exact details of the usage text. So shorten the output test to match the beginning. This fixes breakage when the output changed slightly to include [--]. sim: run: fix crash in argc==0 error situation The new argv processing code assumed that we were always passed a command line. If we weren't, make sure we don't crash before we get a chance to output an error message about incorrect usage. sim: cris: touch up rvdummy handling Add quiet build support and make sure it's removed with `make clean`. sim: cris: replace custom "dest" test field with new --argv0 The #dest field used in the cris testsuite is a bit of hack to set the argv[0] for the tests to read out later on. Now that the sim has an option to set argv[0] explicitly, we don't need this custom field, so let's drop it to harmonize the testsuites a little. sim: run: add --argv0 option to control argv[0] We default argv[0] to the program we run which is a standard *NIX convention, but sometimes we want to be able to control the argv[0] setting independently (especially for programs that inspect argv[0] to change their behavior or output). Add an option to control it. 2021-11-15 Mike Frysinger sim: split program path out of argv vector We use the program argv to both find the program to run (argv[0]) and to hold the arguments to the program. Most of the time this is fine, but if we want to let programs specify argv[0] independently (which is possible in standard *NIX programs), this double duty doesn't work. So let's split the path to the program to run out into a separate field by itself. This simplifies the various sim_open funcs too. By itself, this code is more of a logical cleanup than something that is super useful. But it will open up customization of argv[0] in a follow up commit. Split the changes to make it easier to review. 2021-11-15 Mike Frysinger sim: bfin: fix mach/xfail usage in tests Set the mach to the right value all the time, and update xfail to say the test fails on all targets. WIth multitarget testing, the idea of target here doesn't make much sense. 2021-11-15 Alan Modra -Waddress fixes for gold testsuite Current mainline gcc. common_test_1.c: In function 'main': common_test_1.c:56:14: error: comparison between two arrays [-Werror=array-compare] 56 | assert (c5 > c4); | ^ common_test_1.c:56:14: note: use '&c5[0] > &c4[0]' to compare the addresses * testsuite/common_test_1.c: Avoid -Waddress warnings. * testsuite/common_test_1_v1.c: Likewise. * testsuite/common_test_1_v2.c: Likewise. * testsuite/script_test_2.cc: Likewise. 2021-11-15 Alan Modra PowerPC64 @notoc in non-power10 code R_PPC64_REL24_P9NOTOC is a variant of R_PPC64_REL24_NOTOC for use on @notoc cals from non-power10 code in the rare case that using such a construct is useful. R_PPC64_REL24_P9NOTOC will be emitted by gas rather than R_PPC64_REL24_NOTOC when @notoc is used in a branch instruction if power10 instructions are not enabled at that point. The new relocation tells the linker to not use power10 instructions on any stub emitted for that branch, unless overridden by --power10-stubs=yes. The current linker heuristic of only generating power10 instructions for stubs if power10-only relocations are detected, continues to be used. include/ * elf/ppc64.h (R_PPC64_REL24_P9NOTOC): Define. bfd/ * reloc.c (BFD_RELOC_PPC64_REL24_P9NOTOC): Define. * elf64-ppc.c (ppc64_elf_howto_raw): Add entry for new reloc. (ppc64_elf_reloc_type_lookup): Handle it. (enum ppc_stub_type): Delete. (enum ppc_stub_main_type, ppc_stub_sub_type): New. (struct ppc_stub_type): New. (struct ppc_stub_hash_entry): Use the above new type. (struct ppc_link_hash_table): Update stub_count. (is_branch_reloc, ppc64_elf_check_relocs), (toc_adjusting_stub_needed): Handle new reloc. (stub_hash_newfunc, select_alt_stub, ppc_merge_stub), (ppc_type_of_stub, plt_stub_size, build_plt_stub), (build_tls_get_addr_head, build_tls_get_addr_tail), (ppc_build_one_stub, ppc_size_one_stub, ppc64_elf_size_stubs), (ppc64_elf_build_stubs, ppc64_elf_relocate_section): Handle new reloc. Modify stub handling to suit new scheme. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.c (ppc_elf_suffix): When power10 is not enabled return BFD_RELOC_PPC64_REL24_P9NOTOC for @notoc. (fixup_size, ppc_force_relocation, ppc_fix_adjustable): Handle BFD_RELOC_PPC64_REL24_P9NOTOC. ld/ * testsuite/ld-powerpc/callstub-2.s: Add .machine power10. 2021-11-15 Alan Modra Regenerate a couple of files A couple of files changed on my latest --enable-maintainer-mode build. ld/Makefile.in had a missing dependency but better sorting of the loongson entries. intl/ * configure: Regenerate. ld/ * Makefile.am: Sort loongson entries. * Makefile.in: Regenerate. 2021-11-15 Pedro Alves Fix build with current GCC: EL_EXPLICIT(location) always non-NULL Compiling GDB with current GCC (1b4a63593b) runs into this: src/gdb/location.c: In function 'int event_location_empty_p(const event_location*)': src/gdb/location.c:963:38: error: the address of 'event_location::::explicit_loc' will never be NULL [-Werror=address] 963 | return (EL_EXPLICIT (location) == NULL | ^ src/gdb/location.c:57:30: note: 'event_location::::explicit_loc' declared here 57 | struct explicit_location explicit_loc; | ^~~~~~~~~~~~ GCC is right, EL_EXPLICIT is defined as returning the address of an union field: /* An explicit location. */ struct explicit_location explicit_loc; #define EL_EXPLICIT(P) (&((P)->u.explicit_loc)) and thus must always be non-NULL. Change-Id: Ie74fee7834495a93affcefce03c06e4d83ad8191 2021-11-15 GDB Administrator Automatic date update in version.in 2021-11-14 Lancelot SIX [PR gdb/16238] Add completer for the show user command The 'show user' command (which shows the definition of non-python/scheme user defined commands) is currently missing a completer. This is mentioned in PR 16238. Having one can improve the user experience. In this commit I propose an implementation for such completer as well as the associated tests. Tested on x86_64 GNU/Linux. All feedbacks are welcome. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=16238 2021-11-14 Alan Modra sync libbacktrace from gcc 2021-11-14 GDB Administrator Automatic date update in version.in 2021-11-13 H.J. Lu Sync Makefile.tpl with GCC * Makefile.tpl: Sync with GCC. * Makefile.in: Regenerate. 2021-11-13 Mike Frysinger sim: sh: fix switch-bool warnings This code triggers -Werror=switch-bool warnings with <=gcc-5 versions. Rework it to use if statements instead as it also simplifies a bit. sim: sh: rework carry checks to not rely on integer overflows In <=gcc-7 versions, -fstrict-overflow is enabled by default, and that triggers warnings in this code that relies on integer overflows to test for carries. Change the logic to test against the limit directly. 2021-11-13 GDB Administrator Automatic date update in version.in 2021-11-12 Carl Love Fix gdb.base/sigstep.exp test for ppc The test stops at which is the call to the handler rather than in the handler as intended. This patch replaces the gdb_test "$enter_cmd to handler" with a gdb_test_multiple test. The multiple test looks for the stop at . If found, the command is issued again. The test passes if gdb stops in the handler as expected. (gdb) PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, step from handler: continue to signal stepi 1: x/i $pc => 0x7ffff7f80440 <__kernel_start_sigtramp_rt64>: bctrl (gdb) stepi handler (sig=551) at sigstep.c:32 32 { 1: x/i $pc => 0x10000097c : addis r2,r12,2 (gdb) PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, step from handler: stepi to handler Patch has been tested on x86_64-linux and ppc64le-linux with no test failures. 2021-11-12 Tom de Vries [gdb/testsuite] Fix regexp in gdb.base/foll-vfork.exp On OBS I ran into: ... (gdb) PASS: gdb.base/foll-vfork.exp: exit: \ vfork relations in info inferiors: continue to child exit info inferiors^M Num Description Connection Executable ^M 1 foll-vfork-exit ^M * 2 foll-vfork-exit ^M (gdb) I'm the proud parent of child #5044!^M FAIL: gdb.base/foll-vfork.exp: exit: vfork relations in info inferiors: \ vfork relation no longer appears in info inferiors (timeout) ... Fix this by removing the '$' anchor in the corresponding '$gdb_prompt $' regexps. Tested on x86_64-linux. 2021-11-12 Alan Modra Don't compile some opcodes files when bfd is 32-bit only * Makefile.am (TARGET_LIBOPCODES_CFILES): Split into.. (TARGET64_LIBOPCODES_CFILES): ..this and.. (TARGET32_LIBOPCODES_CFILES): ..this. (ALL_MACHINES): Likewise split to (ALL64_MACHINES, ALL32_MACHINES): ..this. * disassemble.c: Define some ARCH_* when ARCH_all only if BFD64. * configure.ac (BFD_MACHINES): Defined depending on BFD_ARCH_SIZE. * Makefile.in: Regenerate. * configure: Regenerate. Import Makefile.def from gcc * Makefile.def: Import from gcc. * Makefile.in: Regenerate. 2021-11-12 Alan Modra Fix demangle style usage info Extract allowed styles from libiberty, so we don't have to worry about our help messages getting out of date. The function probably belongs in libiberty/cplus-dem.c but it can be here for a while to iron out bugs. PR 28581 * demanguse.c: New file. * demanguse.h: New file. * nm.c (usage): Break up output. Use display_demangler_styles. * objdump.c (usage): Use display_demangler_styles. * readelf.c (usage): Likewise. * Makefile.am: Add demanguse.c and demanguse.h. * Makefile.in: Regenerate. * po/POTFILESin: Regenerate. 2021-11-12 GDB Administrator Automatic date update in version.in 2021-11-11 Simon Marchi gdb: fix "set scheduler-locking" thread exit hang GDB hangs when doing this: - launch inferior with multiple threads - multiple threads hit some breakpoint(s) - one breakpoint hit is presented as a stop, the rest are saved as pending wait statuses - "set scheduler-locking on" - resume the currently selected thread (because of scheduler-locking, it's the only one resumed), let it execute until exit - GDB hangs, not showing the prompt, impossible to interrupt with ^C When the resumed thread exits, we expect the target to return a TARGET_WAITKIND_NO_RESUMED event, and that's what we see: [infrun] fetch_inferior_event: enter [infrun] scoped_disable_commit_resumed: reason=handling event [infrun] random_pending_event_thread: None found. [Thread 0x7ffff7d9c700 (LWP 309357) exited] [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) = [infrun] print_target_wait_results: -1.0.0 [process -1], [infrun] print_target_wait_results: status->kind = no-resumed [infrun] handle_inferior_event: status->kind = no-resumed [infrun] handle_no_resumed: TARGET_WAITKIND_NO_RESUMED (ignoring: found resumed) [infrun] prepare_to_wait: prepare_to_wait [infrun] reset: reason=handling event [infrun] maybe_set_commit_resumed_all_targets: not requesting commit-resumed for target native, no resumed threads [infrun] fetch_inferior_event: exit The problem is in handle_no_resumed: we check if some other thread is actually resumed, to see if we should ignore that event (see comments in that function for more info). If this condition is true: (thread->executing () || thread->has_pending_waitstatus ()) ... then we ignore the event. The problem is that there are some non-resumed threads with a pending event, which makes us ignore the event. But these threads are not resumed, so we end up waiting while nothing executes, hence waiting for ever. My first fix was to change the condition to: (thread->executing () || (thread->resumed () && thread->has_pending_waitstatus ())) ... but then it occured to me that we could simply check for: (thread->resumed ()) Since "executing" implies "resumed", checking simply for "resumed" covers threads that are resumed and executing, as well as threads that are resumed with a pending status, which is what we want. Change-Id: Ie796290f8ae7f34c026ca3a8fcef7397414f4780 2021-11-11 Tom de Vries [gdb/build] Fix Wimplicit-exception-spec-mismatch in clang build When building with clang 13 (and -std=gnu++17 to work around an issue in string_view-selftests.c), we run into a few Wimplicit-exception-spec-mismatch warnings: ... src/gdbsupport/new-op.cc:102:1: error: function previously declared with an \ explicit exception specification redeclared with an implicit exception \ specification [-Werror,-Wimplicit-exception-spec-mismatch] operator delete (void *p) ^ /usr/include/c++/11/new:130:6: note: previous declaration is here void operator delete(void*) _GLIBCXX_USE_NOEXCEPT ^ ... These are due to recent commit 5fff6115fea "Fix LD_PRELOAD=/usr/lib64/libasan.so.6 gdb". Fix this by adding the missing noexcept. Build on x86_64-linux, using gcc 7.5.0 and clang 13.0.0. 2021-11-11 Tom de Vries [gdb/build] Fix build with -std=c++11 When building with -std=c++11, we run into two Werror=missing-declarations: ... new-op.cc: In function 'void operator delete(void*, std::size_t)': new-op.cc:114:1: error: no previous declaration for \ 'void operator delete(void*, std::size_t)' [-Werror=missing-declarations] operator delete (void *p, std::size_t) noexcept ^~~~~~~~ new-op.cc: In function 'void operator delete [](void*, std::size_t)': new-op.cc:132:1: error: no previous declaration for \ 'void operator delete [](void*, std::size_t)' [-Werror=missing-declarations] operator delete[] (void *p, std::size_t) noexcept ^~~~~~~~ ... These are due to recent commit 5fff6115fea "Fix LD_PRELOAD=/usr/lib64/libasan.so.6 gdb". The declarations are provided by (which is included) for c++14 onwards, but they are missing for c++11. Fix this by adding the missing declarations. Tested on x86_64-linux, with gcc 7.5.0, both without (implying -std=gnu++14) and with -std=c++11. 2021-11-11 Tom de Vries [gdb/testsuite] Add gdb.arch/ppc64-break-on-_exit.exp Add a regression test-case for commit a50bdb99afe "[gdb/tdep, rs6000] Don't skip system call in skip_prologue": - set a breakpoint on a local copy of glibc's _exit, and - verify that it triggers. The test-case uses an assembly file by default, but also has the possibility to use a C source file instead. Tested on ppc64le-linux. Verified that the test-case fails without aforementioned commit, and passes with the commit. Both with assembly and C source. 2021-11-11 Nelson Chu RISC-V: Dump objects according to the elf architecture attribute. For now we should always generate the elf architecture attribute both for elf and linux toolchains, so that we could dump the objects correctly according to the generated architecture string. This patch resolves the problem that we probably dump an object with c.nop instructions, but in fact the c extension isn't allowed. Consider the following case, nelson@LAPTOP-QFSGI1F2:~/test$ cat temp.s .option norvc .option norelax .text add a0, a0, a0 .byte 0x1 .balign 16 nelson@LAPTOP-QFSGI1F2:~/test$ ~/binutils-dev/build-elf32-upstream/build-install/bin/riscv32-unknown-elf-as temp.s -o temp.o nelson@LAPTOP-QFSGI1F2:~/test$ ~/binutils-dev/build-elf32-upstream/build-install/bin/riscv32-unknown-elf-objdump -d temp.o temp.o: file format elf32-littleriscv Disassembly of section .text: 00000000 <.text>: 0: 00a50533 add a0,a0,a0 4: 01 .byte 0x01 5: 00 .byte 0x00 6: 0001 nop 8: 00000013 nop c: 00000013 nop nelson@LAPTOP-QFSGI1F2:~/test$ ~/binutils-dev/build-elf32-upstream/build-install/bin/riscv32-unknown-elf-readelf -A temp.o Attribute Section: riscv File Attributes Tag_RISCV_arch: "rv32i2p0_m2p0_a2p0_f2p0_d2p0" The c.nop at address 0x6 is generated for alignment, but since the rvc isn't allowed for this object, dump it as a c.nop instruction looks wrong. After applying this patch, I get the following result, nelson@LAPTOP-QFSGI1F2:~/test$ ~/binutils-dev/build-elf32-upstream/build-install/bin/riscv32-unknown-elf-objdump -d temp.o temp.o: file format elf32-littleriscv Disassembly of section .text: 00000000 <.text>: 0: 00a50533 add a0,a0,a0 4: 01 .byte 0x01 5: 00 .byte 0x00 6: 0001 .2byte 0x1 8: 00000013 nop c: 00000013 nop For the current objdump, we dump data to .byte/.short/.word/.dword, and dump the unknown or unsupported instructions to .2byte/.4byte/.8byte, which respectively are 2, 4 and 8 bytes instructions. Therefore, we shouldn't dump the 0x0001 as a c.nop instruction in the above case, we should dump it to .2byte 0x1 as a unknown instruction, since the rvc is disabled. However, consider that some people may use the new objdump to dump the old objects, which don't have any elf attributes. We usually set the default architecture string to rv64g by bfd/elfxx-riscv.c:riscv_set_default_arch. But this will cause rvc instructions to be unrecognized. Therefore, we set the default architecture string to rv64gc for disassembler, to keep the previous behavior. This patch pass the riscv-gnu-toolchain gcc/binutils regressions for rv32emc-elf, rv32gc-linux, rv32i-elf, rv64gc-elf and rv64gc-linux toolchains. Also, tested by --enable-targets=all and can build riscv-gdb successfully. bfd/ * elfnn-riscv.c (riscv_merge_arch_attr_info): Tidy the codes for riscv_parse_subset_t setting. * elfxx-riscv.c (riscv_get_default_ext_version): Updated. (riscv_subset_supports): Moved from gas/config/tc-riscv.c. (riscv_multi_subset_supports): Likewise. * elfxx-riscv.h: Added extern for riscv_subset_supports and riscv_multi_subset_supports. gas/ * config/tc-riscv.c (riscv_subset_supports): Moved to bfd/elfxx-riscv.c. (riscv_multi_subset_supports): Likewise. (riscv_rps_as): Defined for architectrue parser. (riscv_set_arch): Updated. (riscv_set_abi_by_arch): Likewise. (riscv_csr_address): Likewise. (reg_lookup_internal): Likewise. (riscv_ip): Likewise. (s_riscv_option): Updated. * testsuite/gas/riscv/mapping-04b.d: Updated. * testsuite/gas/riscv/mapping-norelax-03b.d: Likewise. * testsuite/gas/riscv/mapping-norelax-04b.d: Likewise. opcodes/ * riscv-dis.c: Include elfxx-riscv.h since we need the architecture parser. Also removed the cpu-riscv.h, it is already included in elfxx-riscv.h. (default_isa_spec): Defined since the parser need this to set the default architecture string. (xlen): Moved out from riscv_disassemble_insn as a global variable, it is more convenient to initialize riscv_rps_dis. (riscv_subsets): Defined to recoed the supported extensions. (riscv_rps_dis): Defined for architectrue parser. (riscv_disassemble_insn): Call riscv_multi_subset_supports to make sure if the instructions are valid or not. (print_insn_riscv): Initialize the riscv_subsets by parsing the elf architectrue attribute. Otherwise, set the default architectrue string to rv64gc. 2021-11-11 Mike Frysinger sim: testsuite: drop sim_compile cover function Most code isn't using this, and the only call site (in one cris file) can use target_compile directly. So switch it over to simplify. sim: cris: stop testing a.out explicitly [ld/13900] Since gcc dropped support for a.out starting with 4.4.0 in 2009, it's been impossible to verify this code actually still works. Since it crashes in ld, and it uses a config option that no other tests uses and we want to remove, drop the test to avoid all the trouble. sim: io: tweak compiler workaround with error output Outputting an extra space broke a cris test. Change the workaround to use %s with an empty string to avoid the compiler warning but not output an extra space. sim: testsuite: delete unused arm remote host logic There's no need to sync testutils.inc with remote hosts. The one we have in the source tree is all we need and only thing we test. Delete it to simplify. sim: synacor: simplify test generation Objcopy was used to create a binary file of just the executable code since the environment requires code to based at address 0. We can accomplish the same thing with the -Ttext=0 flag, so switch to that to get rid of custom logic. 2021-11-11 GDB Administrator Automatic date update in version.in 2021-11-10 Tom Tromey Handle PIE in .debug_loclists Simon pointed out that my recent patches to .debug_loclists caused some regressions. After a brief discussion we realized it was because his system compiler defaults to PIE. This patch changes this code to unconditionally apply the text offset here. It also changes loclist_describe_location to work more like dwarf2_find_location_expression. I tested this by running the gdb.dwarf2 tests both with and without -pie. 2021-11-10 Przemyslaw Wirkus arm: enable Cortex-A710 CPU This patch is adding support for Cortex-A710 CPU in Arm. bfd/ * cpu-arm.c (processors): Add cortex-a710. gas/ * NEWS: Update docs. * config/tc-arm.c (arm_cpus): Add cortex-a710 to -mcpu. * doc/c-arm.texi: Update docs. * testsuite/gas/arm/cpu-cortex-a710.d: New test. 2021-11-10 Clément Chigot gdb: adjust x_file fields on COFF readers Commit e86fc4a5bc37 ("PR 28447: implement multiple parameters for .file on XCOFF") changes the structure associated to the internal representation of files in COFF formats. However, gdb directory update has been forgotten, leading to compilation errors of this kind: CXX coffread.o /home/simark/src/binutils-gdb/gdb/coffread.c: In function 'const char* coff_getfilename(internal_auxent*)': /home/simark/src/binutils-gdb/gdb/coffread.c:1343:29: error: 'union internal_auxent::::' has no member named 'x_zeroes' 1343 | if (aux_entry->x_file.x_n.x_zeroes == 0) | ^~~~~~~~ Fix it by adjusting the COFF code in GDB. Change-Id: I703fa134bc722d47515efbd72b88fa5650af6c3c 2021-11-10 Tom de Vries [gdb/testsuite] Add gdb.opt/break-on-_exit.exp Add a test-case to excercise the problem scenario reported in PR28527 and fixed in commit a50bdb99afe "[gdb/tdep, rs6000] Don't skip system call in skip_prologue": - set a breakpoint on _exit, and - verify that it triggers. Note that this is not a regression test for that commit. Since the actual code in _exit may vary across os instances, we cannot guarantee that the problem will always trigger with this test-case. Rather, this test-case is a version of the original test-case (gdb.threads/process-dies-while-detaching.exp) that is minimal while still reproducing the problem reported in PR28527, in that same setting. The benefit of this test-case is that it exercise real-life code and may expose similar problems in other settings. Also, it provides a much easier test-case to investigate in case a similar problem occurs. Tested on x86_64-linux and ppc64le-linux. 2021-11-10 Mike Frysinger sim: frv: flip trapdump default back to off When I refactored this by scoping it to sim-frv-xxx in commit e7954ef5e5ed90fb7d28c013518f4c2e6bcd20a1 ("sim: frv: scope the unique configure flag"), I changed the default from off to on. While the feature is nice for developers, it breaks a bunch of tests which aren't expecting this extra output. So flip it back to off by default. 2021-11-10 Pekka Seppänen PR28575, readelf.c and strings.c use undefined type uint Since --unicode support (commit b3aa80b45c4) both binutils/readelf.c and binutils/strings.c use 'uint' in a few locations. It likely should be 'unsigned int' since there isn't anything defining 'uint' within binutils (besides zlib) and AFAIK it isn't a standard type. * readelf.c (print_symbol): Replace uint with unsigned int. * strings.c (string_min, display_utf8_char): Likewise. (print_unicode_stream_body, print_unicode_stream): Likewise. (print_strings): Likewise. (get_unicode_byte): Wrap long line. 2021-11-10 Clément Chigot ld: set correct flags for AIX shared tests Previous flags were aimed to be run with XLC. Nowadays, only GCC is being tested with GNU toolchain. Moreover, recent XLC versions might also accept "-shared". * testsuite/ld-shared/shared.exp: Adjust shared flags. 2021-11-10 Clément Chigot PR 28447: implement multiple parameters for .file on XCOFF On XCOFF, ".file" pseudo-op allows 3 extras parameters to provide additional information to AIX linker, or its debugger. These are stored in auxiliary entries of the C_FILE symbol. bfd/ PR 28447 * coffcode.h (combined_entry_type): Add extrap field. (coff_bigobj_swap_aux_in): Adjust names of x_file fields. (coff_bigobj_swap_aux_out): Likewise. * coffgen.c (coff_write_auxent_fname): New function. (coff_fix_symbol_name): Write x_file using coff_write_auxent_fname. (coff_write_symbol): Likewise. (coff_write_symbols): Add C_FILE auxiliary entries to string table if needed. (coff_get_normalized_symtab): Adjust names of x_file fields. Normalize C_FILE auxiliary entries. (coff_print_symbol): Print C_FILE auxiliary entries. * coff-rs6000.c (_bfd_xcoff_swap_aux_in): Adjust names of x_file fields. (_bfd_xcoff_swap_aux_out): Likewise. * coff64-rs6000.c (_bfd_xcoff64_swap_aux_in): Likewise. (_bfd_xcoff64_swap_aux_out): Likewise. * cofflink.c (_bfd_coff_final_link): Likewise. (_bfd_coff_link_input_bfd): Likewise. * coffswap.h (coff_swap_aux_in): Likewise. * peXXigen.c (_bfd_XXi_swap_aux_in): Likewise. (_bfd_XXi_swap_aux_out): Likewise. * xcofflink.c (xcoff_link_input_bfd): Likewise. * libcoff.h: Regenerate. gas/ * config/tc-ppc.c (ppc_file): New function. * config/tc-ppc.h (OBJ_COFF_MAX_AUXENTRIES): Change to 4. * testsuite/gas/ppc/aix.exp: Add tests. * testsuite/gas/ppc/xcoff-file-32.d: New test. * testsuite/gas/ppc/xcoff-file-64.d: New test. * testsuite/gas/ppc/xcoff-file.s: New test. include/ * coff/internal.h (union internal_auxent): Change x_file to be a struct instead of a union. Add x_ftype field. * coff/rs6000.h (union external_auxent): Add x_resv field. * coff/xcoff.h (XFT_FN): New define. (XFT_CT): Likewise. (XFT_CV): Likewise. (XFT_CD): Likewise. 2021-11-10 Kevin Buettner Test case for Bug 28308 The purpose of this test is described in the comments in dprintf-execution-x-script.exp. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28308 The name of this new test was based on that of an existing test, bp-cmds-execution-x-script.exp. I started off by copying that test, adding to it, and then rewriting almost all of it. It's different enough that I decided that listing the copyright year as 2021 was sufficient. 2021-11-10 Kevin Buettner Fix PR 28308 - dprintf breakpoints not working when run from script This commit fixes Bug 28308, titled "Strange interactions with dprintf and break/commands": Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28308 Since creating that bug report, I've found a somewhat simpler way of reproducing the problem. I've encapsulated it into the GDB test case which I've created along with this bug fix. The name of the new test is gdb.base/dprintf-execution-x-script.exp, I'll demonstrate the problem using this test case, though for brevity, I've placed all relevant files in the same directory and have renamed the files to all start with 'dp-bug' instead of 'dprintf-execution-x-script'. The script file, named dp-bug.gdb, consists of the following commands: dprintf increment, "dprintf in increment(), vi=%d\n", vi break inc_vi commands continue end run Note that the final command in this script is 'run'. When 'run' is instead issued interactively, the bug does not occur. So, let's look at the interactive case first in order to see the correct/expected output: $ gdb -q -x dp-bug.gdb dp-bug ... eliding buggy output which I'll discuss later ... (gdb) run Starting program: /mesquite2/sourceware-git/f34-master/bld/gdb/tmp/dp-bug vi=0 dprintf in increment(), vi=0 Breakpoint 2, inc_vi () at dprintf-execution-x-script.c:26 26 in dprintf-execution-x-script.c vi=1 dprintf in increment(), vi=1 Breakpoint 2, inc_vi () at dprintf-execution-x-script.c:26 26 in dprintf-execution-x-script.c vi=2 dprintf in increment(), vi=2 Breakpoint 2, inc_vi () at dprintf-execution-x-script.c:26 26 in dprintf-execution-x-script.c vi=3 [Inferior 1 (process 1539210) exited normally] In this run, in which 'run' was issued from the gdb prompt (instead of at the end of the script), there are three dprintf messages along with three 'Breakpoint 2' messages. This is the correct output. Now let's look at the output that I snipped above; this is the output when 'run' is issued from the script loaded via GDB's -x switch: $ gdb -q -x dp-bug.gdb dp-bug Reading symbols from dp-bug... Dprintf 1 at 0x40116e: file dprintf-execution-x-script.c, line 38. Breakpoint 2 at 0x40113a: file dprintf-execution-x-script.c, line 26. vi=0 dprintf in increment(), vi=0 Breakpoint 2, inc_vi () at dprintf-execution-x-script.c:26 26 dprintf-execution-x-script.c: No such file or directory. vi=1 Breakpoint 2, inc_vi () at dprintf-execution-x-script.c:26 26 in dprintf-execution-x-script.c vi=2 Breakpoint 2, inc_vi () at dprintf-execution-x-script.c:26 26 in dprintf-execution-x-script.c vi=3 [Inferior 1 (process 1539175) exited normally] In the output shown above, only the first dprintf message is printed. The 2nd and 3rd dprintf messages are missing! However, all three 'Breakpoint 2...' messages are still printed. Why does this happen? bpstat_do_actions_1() in gdb/breakpoint.c contains the following comment and code near the start of the function: /* Avoid endless recursion if a `source' command is contained in bs->commands. */ if (executing_breakpoint_commands) return 0; scoped_restore save_executing = make_scoped_restore (&executing_breakpoint_commands, 1); Also, as described by this comment prior to the 'async' field in 'struct ui' in top.h, the main UI starts off in sync mode when processing command line arguments: /* True if the UI is in async mode, false if in sync mode. If in sync mode, a synchronous execution command (e.g, "next") does not return until the command is finished. If in async mode, then running a synchronous command returns right after resuming the target. Waiting for the command's completion is later done on the top event loop. For the main UI, this starts out disabled, until all the explicit command line arguments (e.g., `gdb -ex "start" -ex "next"') are processed. */ This combination of things, the state of the static global 'executing_breakpoint_commands' plus the state of the async field in the main UI causes this behavior. This is a backtrace after hitting the dprintf breakpoint for the second time when doing 'run' from the script file, i.e. non-interactively: Thread 1 "gdb" hit Breakpoint 3, bpstat_do_actions_1 (bsp=0x7fffffffc2b8) at /ironwood1/sourceware-git/f34-master/bld/../../worktree-master/gdb/breakpoint.c:4431 4431 if (executing_breakpoint_commands) #0 bpstat_do_actions_1 (bsp=0x7fffffffc2b8) at gdb/breakpoint.c:4431 #1 0x00000000004d8bc6 in dprintf_after_condition_true (bs=0x1538090) at gdb/breakpoint.c:13048 #2 0x00000000004c5caa in bpstat_stop_status (aspace=0x116dbc0, bp_addr=0x40116e, thread=0x137f450, ws=0x7fffffffc718, stop_chain=0x1538090) at gdb/breakpoint.c:5498 #3 0x0000000000768d98 in handle_signal_stop (ecs=0x7fffffffc6f0) at gdb/infrun.c:6172 #4 0x00000000007678d3 in handle_inferior_event (ecs=0x7fffffffc6f0) at gdb/infrun.c:5662 #5 0x0000000000763cd5 in fetch_inferior_event () at gdb/infrun.c:4060 #6 0x0000000000746d7d in inferior_event_handler (event_type=INF_REG_EVENT) at gdb/inf-loop.c:41 #7 0x00000000007a702f in handle_target_event (error=0, client_data=0x0) at gdb/linux-nat.c:4207 #8 0x0000000000b8cd6e in gdb_wait_for_event (block=block@entry=0) at gdbsupport/event-loop.cc:701 #9 0x0000000000b8d032 in gdb_wait_for_event (block=0) at gdbsupport/event-loop.cc:597 #10 gdb_do_one_event () at gdbsupport/event-loop.cc:212 #11 0x00000000009d19b6 in wait_sync_command_done () at gdb/top.c:528 #12 0x00000000009d1a3f in maybe_wait_sync_command_done (was_sync=0) at gdb/top.c:545 #13 0x00000000009d2033 in execute_command (p=0x7fffffffcb18 "", from_tty=0) at gdb/top.c:676 #14 0x0000000000560d5b in execute_control_command_1 (cmd=0x13b9bb0, from_tty=0) at gdb/cli/cli-script.c:547 #15 0x000000000056134a in execute_control_command (cmd=0x13b9bb0, from_tty=0) at gdb/cli/cli-script.c:717 #16 0x00000000004c3bbe in bpstat_do_actions_1 (bsp=0x137f530) at gdb/breakpoint.c:4469 #17 0x00000000004c3d40 in bpstat_do_actions () at gdb/breakpoint.c:4533 #18 0x00000000006a473a in command_handler (command=0x1399ad0 "run") at gdb/event-top.c:624 #19 0x00000000009d182e in read_command_file (stream=0x113e540) at gdb/top.c:443 #20 0x0000000000563697 in script_from_file (stream=0x113e540, file=0x13bb0b0 "dp-bug.gdb") at gdb/cli/cli-script.c:1642 #21 0x00000000006abd63 in source_gdb_script (extlang=0xc44e80 , stream=0x113e540, file=0x13bb0b0 "dp-bug.gdb") at gdb/extension.c:188 #22 0x0000000000544400 in source_script_from_stream (stream=0x113e540, file=0x7fffffffd91a "dp-bug.gdb", file_to_open=0x13bb0b0 "dp-bug.gdb") at gdb/cli/cli-cmds.c:692 #23 0x0000000000544557 in source_script_with_search (file=0x7fffffffd91a "dp-bug.gdb", from_tty=1, search_path=0) at gdb/cli/cli-cmds.c:750 #24 0x00000000005445cf in source_script (file=0x7fffffffd91a "dp-bug.gdb", from_tty=1) at gdb/cli/cli-cmds.c:759 #25 0x00000000007cf6d9 in catch_command_errors (command=0x5445aa , arg=0x7fffffffd91a "dp-bug.gdb", from_tty=1, do_bp_actions=false) at gdb/main.c:523 #26 0x00000000007cf85d in execute_cmdargs (cmdarg_vec=0x7fffffffd1b0, file_type=CMDARG_FILE, cmd_type=CMDARG_COMMAND, ret=0x7fffffffd18c) at gdb/main.c:615 #27 0x00000000007d0c8e in captured_main_1 (context=0x7fffffffd3f0) at gdb/main.c:1322 #28 0x00000000007d0eba in captured_main (data=0x7fffffffd3f0) at gdb/main.c:1343 #29 0x00000000007d0f25 in gdb_main (args=0x7fffffffd3f0) at gdb/main.c:1368 #30 0x00000000004186dd in main (argc=5, argv=0x7fffffffd508) at gdb/gdb.c:32 There are two frames for bpstat_do_actions_1(), one at frame #16 and the other at frame #0. The one at frame #16 is processing the actions for Breakpoint 2, which is a 'continue'. The one at frame #0 is attempting to process the dprintf breakpoint action. However, at this point, the value of 'executing_breakpoint_commands' is 1, forcing an early return, i.e. prior to executing the command(s) associated with the dprintf breakpoint. For the sake of comparison, this is what the stack looks like when hitting the dprintf breakpoint for the second time when issuing the 'run' command from the GDB prompt. Thread 1 "gdb" hit Breakpoint 3, bpstat_do_actions_1 (bsp=0x7fffffffccd8) at /ironwood1/sourceware-git/f34-master/bld/../../worktree-master/gdb/breakpoint.c:4431 4431 if (executing_breakpoint_commands) #0 bpstat_do_actions_1 (bsp=0x7fffffffccd8) at gdb/breakpoint.c:4431 #1 0x00000000004d8bc6 in dprintf_after_condition_true (bs=0x16b0290) at gdb/breakpoint.c:13048 #2 0x00000000004c5caa in bpstat_stop_status (aspace=0x116dbc0, bp_addr=0x40116e, thread=0x13f0e60, ws=0x7fffffffd138, stop_chain=0x16b0290) at gdb/breakpoint.c:5498 #3 0x0000000000768d98 in handle_signal_stop (ecs=0x7fffffffd110) at gdb/infrun.c:6172 #4 0x00000000007678d3 in handle_inferior_event (ecs=0x7fffffffd110) at gdb/infrun.c:5662 #5 0x0000000000763cd5 in fetch_inferior_event () at gdb/infrun.c:4060 #6 0x0000000000746d7d in inferior_event_handler (event_type=INF_REG_EVENT) at gdb/inf-loop.c:41 #7 0x00000000007a702f in handle_target_event (error=0, client_data=0x0) at gdb/linux-nat.c:4207 #8 0x0000000000b8cd6e in gdb_wait_for_event (block=block@entry=0) at gdbsupport/event-loop.cc:701 #9 0x0000000000b8d032 in gdb_wait_for_event (block=0) at gdbsupport/event-loop.cc:597 #10 gdb_do_one_event () at gdbsupport/event-loop.cc:212 #11 0x00000000007cf512 in start_event_loop () at gdb/main.c:421 #12 0x00000000007cf631 in captured_command_loop () at gdb/main.c:481 #13 0x00000000007d0ebf in captured_main (data=0x7fffffffd3f0) at gdb/main.c:1353 #14 0x00000000007d0f25 in gdb_main (args=0x7fffffffd3f0) at gdb/main.c:1368 #15 0x00000000004186dd in main (argc=5, argv=0x7fffffffd508) at gdb/gdb.c:32 This relatively short backtrace is due to the current UI's async field being set to 1. Yet another thing to be aware of regarding this problem is the difference in the way that commands associated to dprintf breakpoints versus regular breakpoints are handled. While they both use a command list associated with the breakpoint, regular breakpoints will place the commands to be run on the bpstat chain constructed in bp_stop_status(). These commands are run later on. For dprintf breakpoints, commands are run via the 'after_condition_true' function pointer directly from bpstat_stop_status(). (The 'commands' field in the bpstat is cleared in dprintf_after_condition_true(). This prevents the dprintf commands from being run again later on when other commands on the bpstat chain are processed.) Another thing that I noticed is that dprintf breakpoints are the only type of breakpoint which use 'after_condition_true'. This suggests that one possible way of fixing this problem, that of making dprintf breakpoints work more like regular breakpoints, probably won't work. (I must admit, however, that my understanding of this code isn't complete enough to say why. I'll trust that whoever implemented it had a good reason for doing it this way.) The comment referenced earlier regarding 'executing_breakpoint_commands' states that the reason for checking this variable is to avoid potential endless recursion when a 'source' command appears in bs->commands. We know that a dprintf command is constrained to either 1) execution of a GDB printf command, 2) an inferior function call of a printf-like function, or 3) execution of an agent-printf command. Therefore, infinite recursion due to a 'source' command cannot happen when executing commands upon hitting a dprintf breakpoint. I chose to fix this problem by having dprintf_after_condition_true() directly call execute_control_commands(). This means that it no longer attempts to go through bpstat_do_actions_1() avoiding the infinite recursion check for potential 'source' commands on the command chain. I think it simplifies this code a little bit too, a definite bonus. Summary: * breakpoint.c (dprintf_after_condition_true): Don't call bpstat_do_actions_1(). Call execute_control_commands() instead. 2021-11-10 Alan Modra Re: Add --unicode option * objdump: Whitespace fixes. (long_options): Correct "ctf" entry. 2021-11-10 Alan Modra Re: Add --unicode option At low optimisation levels gcc may warn. * strings.c (print_unicode_stream_body): Avoid bogus "may be used unitialised" warning. 2021-11-10 GDB Administrator Automatic date update in version.in 2021-11-09 Alan Modra PR28543, readelf entered an infinite loop This little tweak terminates fuzzed binary readelf output a little quicker. PR 28543 * dwarf.c (read_and_display_attr_value): Consume a byte when form is unrecognized. 2021-11-09 Alan Modra PR28542, Undefined behaviours in readelf.c PR 28542 * readelf.c (dump_relocations): Check that section headers have been read before attempting to access section name. (print_dynamic_symbol): Likewise. (process_mips_specific): Delete dead code. 2021-11-09 Pedro Alves gdb::array_view slicing/container selftest - test std::array too Change-Id: I2141b0b8a09f6521a59908599eb5ba1a19b18dc6 2021-11-09 Simon Marchi gdb.debuginfod/fetch_src_and_symbols.exp: fix when GDB is built with AddressSanitizer This test fails for me, showing: ERROR: tcl error sourcing /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.debuginfod/fetch_src_and_symbols.exp. ERROR: This GDB was configured as follows: configure --host=x86_64-pc-linux-gnu --target=x86_64-pc-linux-gnu --with-auto-load-dir=$debugdir:$datadir/auto-load --with-auto-load-safe-path=$debugdir:$datadir/auto-load ... and much more ... The problem is that TCL's exec throws an error as soon as the exec'ed process outputs on stderr. When GDB is built with ASan, it prints some warnings about pre-existing signal handlers: warning: Found custom handler for signal 7 (Bus error) preinstalled. warning: Found custom handler for signal 8 (Floating point exception) preinstalled. warning: Found custom handler for signal 11 (Segmentation fault) preinstalled. Pass --quiet to GDB to avoid these warnings. Change-Id: I3751d89b9b1df646da19149d7cb86775e2d3e80f 2021-11-09 Tom Tromey Correctly handle DW_LLE_start_end When the code to handle DW_LLE_start_end was added (as part of some DWARF 5 work), it was written to add the base address. However, this seems incorrect -- the DWARF standard describes this as an address, not an offset from the base address. This patch changes a couple of spots in dwarf2/loc.c to fix this problem. It then changes decode_debug_loc_addresses to return DEBUG_LOC_OFFSET_PAIR instead, which preserves the previous semantics. This only showed up on the RISC-V target internally, due to the combination of DWARF 5 and a newer version of GCC. I've updated a couple of existing loclists test cases to demonstrate the bug. 2021-11-09 Tom Tromey Fix build on rhES5 The rhES5 build failed due to an upstream import a while back. The bug here is that, while the 'personality' function exists, ADDR_NO_RANDOMIZE is only defined in , not . However, does not declare the 'personality' function, and and cannot both be included. This patch restores one of the removed configure checks and updates the code to check it. We had this as a local patch at AdaCore, because it seemed like there was no interest upstream. However, now it turns out that this fixes PR build/28555, so I'm sending it now. 2021-11-09 H.J. Lu doc/ctf-spec.texi: Remove "@validatemenus off" Remove @validatemenus from ctf-spec.texi, which has been removed from texinfo by commit a16dd1a9ece08568a1980b9a65a3a9090717997f Author: Gavin Smith Date: Mon Oct 12 16:32:37 2020 +0100 * doc/texinfo.texi (Writing a Menu, Customization Variables for @-Commands) (Command List), * doc/refcard/txirefcard.tex Remove @validatemenus. * tp/Texinfo/XS/Makefile.am (command_ids.h): Use gawk instead of awk. Avoid discouraged "$p" usage, using "$(p)" instead. * tp/Texinfo/XS/configure.ac: Check for gawk. commit 128acab3889b51809dc3bd3c6c74b61d13f7f5f4 Author: Gavin Smith Date: Thu Jan 3 14:51:53 2019 +0000 Update refcard. * doc/refcard/txirefcard.tex: @setfilename is no longer mandatory. Do not mention @validatemenus or explicitly giving @node pointers, as these are not very important features. PR libctf/28567 * doc/ctf-spec.texi: Remove "@validatemenus off". 2021-11-09 Nick Clifton Add --unicode option to control how unicode characters are handled by display tools. * nm.c: Add --unicode option to control how unicode characters are handled. * objdump.c: Likewise. * readelf.c: Likewise. * strings.c: Likewise. * binutils.texi: Document the new feature. * NEWS: Document the new feature. * testsuite/binutils-all/unicode.exp: New file. * testsuite/binutils-all/nm.hex.unicode * testsuite/binutils-all/strings.escape.unicode * testsuite/binutils-all/objdump.highlight.unicode * testsuite/binutils-all/readelf.invalid.unicode 2021-11-09 Mike Frysinger sim: sh: simplify testsuite a bit Switch from the centralized list in the exp file to each test declaring its own requirements which they're already (mostly) doing. This will increase coverage slightly by running more tests in more configurations since the hardcoded exp list was a little out of date. We have to mark the psh* tests as shdsp only (to match what the exp file was doing), mark the fsca & fsrra tests as failing (since they weren't even being run by the exp file), and to fix the expected output & status of the fail test. 2021-11-09 Mike Frysinger sim: cris: clean up missing func prototype warnings Move some unused funcs under existing #if 0 protection, mark a few local funcs as static, and add missing prototypes for the rest which are used from other files. This fixes all the fatal warnings in the mloop files so we can turn -Werror on here fully. 2021-11-09 GDB Administrator Automatic date update in version.in 2021-11-08 Lancelot SIX Improve gdb::array_view ctor from contiguous containers While reading the interface of gdb::array_view, I realized that the constructor that builds an array_view on top of a contiguous container (such as std::vector, std::array or even gdb::array_view) can be missused. Lets consider the following code sample: struct Parent { Parent (int a): a { a } {} int a; }; std::ostream &operator<< (std::ostream& os, const Parent & p) { os << "Parent {a=" << p.a << "}"; return os; } struct Child : public Parent { Child (int a, int b): Parent { a }, b { b } {} int b; }; std::ostream &operator<< (std::ostream& os, const Child & p) { os << "Child {a=" << p.a << ", b=" << p.b << "}"; return os; } template void print (const gdb::array_view &p) { std::for_each (p.begin (), p.end (), [](const T &p) { std::cout << p << '\n'; }); } Then with the current interface nothinng prevents this usage of array_view to be done: const std::array elts = { Child {1, 2}, Child {3, 4}, Child {5, 6} }; print_all (elts); This compiles fine and produces the following output: Parent {a=1} Parent {a=2} Parent {a=3} which is obviously wrong. There is nowhere in memory a Parent-like object for which the A member is 2 and this call to print_all shold not compile at all (calling print_all is however fine). This comes down to the fact that a Child* is convertible into a Parent*, and that an array view is constructed to a pointer to the first element and a size. The valid type pointed to that can be used with this constructor are restricted using SFINAE, which requires that a pointer to a member into the underlying container can be converted into a pointer the array_view's data type. This patch proposes to change the constraints on the gdb::array_view ctor which accepts a container now requires that the (decayed) type of the elements in the container match the (decayed) type of the array_view being constructed. Applying this change required minimum adjustment in GDB codebase, which are also included in this patch. Tested by rebuilding. 2021-11-08 Lancelot SIX Add a const version of gdb_argv:as_array_view This commits adds const versions for the GET and AS_ARRAX_VIEW methods of gdb_argv. Those methods will be required in the following patch of the series. 2021-11-08 Simon Marchi gdb: fix nulltr -> nullptr typo Change-Id: I04403bd85ec3fa75ea14130d68daba675a2a8aeb 2021-11-08 Simon Marchi gdb: tweak scoped_disable_commit_resumed uses when resuming all threads in non-stop When doing "continue -a" in non-stop mode, each thread is individually resumed while the commit resumed state is enabled. This forces the target to commit each resumption immediately, instead of being able to batch things. The reason is that there is no scoped_disable_commit_resumed around the loop over threads in continue_1, when "non_stop && all_threads" is true. Since the proceed function is called once for each thread, the scoped_disable_commit_resumed in proceed therefore forces commit-resumed between each thread resumption. Add the necessary scoped_disable_commit_resumed in continue_1 to avoid that. I looked at the MI side of things, the function exec_continue, and found that it was correct. There is a similar iteration over threads, and there is a scoped_disable_commit_resumed at the function scope. This is not wrong, but a bit more than we need. The branches that just call continue_1 do not need it, as continue_1 takes care of disabling commit resumed. So, move the scoped_disable_commit_resumed to the inner scope where we iterate on threads and proceed them individually. Here's an example debugging a multi-threaded program attached by gdbserver (debug output trimmed for brevity): $ ./gdb -nx -q --data-directory=data-directory -ex "set non-stop" -ex "tar rem :1234" (gdb) set debug remote (gdb) set debug infrun (gdb) c -a Continuing. [infrun] proceed: enter [infrun] scoped_disable_commit_resumed: reason=proceeding [remote] Sending packet: $vCont;c:p14388.14388#90 [infrun] reset: reason=proceeding [infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target remote [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target remote [infrun] proceed: exit [infrun] proceed: enter [infrun] scoped_disable_commit_resumed: reason=proceeding [remote] Sending packet: $vCont;c:p14388.1438a#b9 [infrun] reset: reason=proceeding [infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target remote [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target remote [infrun] proceed: exit ... and so on for each thread ... Notice how we send one vCont;c for each thread. With the patch applied, we send a single vCont;c at the end: [infrun] scoped_disable_commit_resumed: reason=continue all threads in non-stop [infrun] proceed: enter [infrun] scoped_disable_commit_resumed: reason=proceeding [infrun] reset: reason=proceeding [infrun] proceed: exit [infrun] clear_proceed_status_thread: Thread 85790.85792 [infrun] proceed: enter [infrun] scoped_disable_commit_resumed: reason=proceeding [infrun] reset: reason=proceeding [infrun] proceed: exit ... proceeding threads individually ... [infrun] reset: reason=continue all threads in non-stop [infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target remote [infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target remote [remote] Sending packet: $vCont;c#a8 Change-Id: I331dd2473c5aa5114f89854196fed2a8fdd122bb 2021-11-08 Simon Marchi gdb: make dwarf2_find_containing_comp_unit take a dwarf2_per_bfd While reading another patch, I saw that this function didn't need to take a dwarf2_per_objfile, but could take a dwarf2_per_bfd instead. It doesn't change the behavior, but doing this shows that this function is objfile-independent (can work with only the shared per-bfd data). Change-Id: I58f9c9cef6688902e95226480285da2d0005d77f 2021-11-08 Simon Marchi gdb: remove bpstat typedef, rename bpstats to bpstat I don't find that the bpstat typedef, which hides a pointer, is particularly useful. In fact, it confused me many times, and I just see it as something to remember that adds cognitive load. Also, with C++, we might want to be able to pass bpstats objects by const-reference, not necessarily by pointer. So, remove the bpstat typedef and rename struct bpstats to bpstat (since it represents one bpstat, it makes sense that it is singular). Change-Id: I52e763b6e54ee666a9e045785f686d37b4f5f849 2021-11-08 Nick Alcock libctf: add CTF format specification It's been a long time since most of this was written: it's long past time to put it in the binutils source tree. It's believed correct and complete insofar as it goes: it documents format v3 (the current version) but not the libctf API or any earlier versions. (The earlier versions can be read by libctf but not generated by it, and you are highly unlikely ever to see an example of any of them.) libctf/ChangeLog 2021-11-08 Nick Alcock * doc/ctf-spec.texi: New file. * configure.ac (MAKEINFO): Add. (BUILD_INFO): Likewise. (AC_CONFIG_FILES) [doc/Makefile]: Add. * Makefile.am [BUILD_INFO] (SUBDIRS): Add doc/. * doc/Makefile.am: New file. * doc/Makefile.in: Likewise. * configure: Regenerated. * Makefile.in: Likewise. 2021-11-08 GDB Administrator Automatic date update in version.in 2021-11-07 Alan Modra Correct ld script wildcard matching description Goes with commit 68bbb9f788d0 * ld.texi (Input Section Wildcards): Delete paragraph incorrectly saying '*' does not match '/'. 2021-11-07 Mike Frysinger sim: sh: fix conversion of PC to an integer On LLP64 targets where sizeof(long) != sizeof(void*), this code fails: sim/sh/interp.c:704:24: error: cast from pointer to integer of different size -Werror=pointer-to-int-cast] 704 | do { memstalls += ((((long) PC & 3) != 0) ? (n) : ((n) - 1)); } while (0) | ^ Since this code simply needs to check alignment, cast it using uintptr_t which is the right type for this. 2021-11-07 Mike Frysinger sim: sh: clean up time(NULL) call Casting 0 to a pointer via (long *) doesn't work on LLP64 targets: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] It's also unnecessary here. We can simply pass NULL like every other bit of code does. 2021-11-07 Mike Frysinger sim: sh: break utime logic out of _WIN32 check Some _WIN32 targets provide utime (like mingw), so move the header include out from _WIN32 and under the specific HAVE_UTIME_H check. sim: sh: drop errno extern This isn't needed on any reasonable target nowadays, and no other source does this, and breaks with some mingw targets, so punt the extern entirely. sim: sh: fix isnan redefinition with mingw targets The code assumes that all _WIN32 targets are the same and can define isnan to _isnan. For mingw targets, they provide an isnan define already, so no need for the fallback here. sim: arm/bfin/rx: undefine page size from system headers Some targets (like cygwin) will export page size defines that clash with our local usage here. Undefine the system one to fix building for these targets. sim: ppc: switch to libiberty environ.h Drop our compat code and assume environ exists to simplify. We did this for all other targets already, but ppc was missed. sim: sh: enable -Werror everywhere With most of the warnings fixed in interp.c, we can enable -Werror here too now. There are some -Wmaybe-uninitialized warnings still lurking that look legitimate, but we don't flag those are fatal, and I don't have the expertise to dive into each opcode to figure out the right way to clean them up. sim: sh: fix uninitialized variable usage with pdmsb This block of code relies on i to control which bits to test and how many times to run through the loop, but it never actually initialized it. There is another chunk of code that handles the pdmsb instruction that sets i to 16, so use that here too assuming it's correct. The programming manual suggests this is the right value too, but I am by no means a SuperH DSP expert. The tests are still passing though ... sim: sh: constify a few read-only lookup tables sim: sh: fix various parentheses warnings Add parentheses to a bunch of places where the compiler suggests we do to avoid confusion to most readers. sim: sh: fix unused-value warnings These macro expansions are deliberate in not using the computed value so that they trigger side-effects (possible invalid memory accesses) but while otherwise being noops. Add a (void) cast so the compiler knows these are intentional. sim: sh: rework register layout with anonymous unions & structs Now that we require C11, we can leverage anonymous unions & structs to fix a long standing issue with the SH register layout. The use of sregs.i for sh-dsp has generated a lot of compiler warnings about the access being out of bounds -- it only has 7 elements declared, but code goes beyond that to reach into the fregs that follow. But now that we have anonymous unions, we can reduce the nested names and have sregs cover all of these registers. 2021-11-07 GDB Administrator Automatic date update in version.in 2021-11-06 Tiezhu Yang sim: mips: use sim_fpu_to{32,64}u to fix build warnings Since the first argument type is unsigned32 or unsigned64, just use sim_fpu_to{32,64}u instead of sim_fpu_to{32,64}i to fix the following build warnings: CC cp1.o .../sim/mips/cp1.c: In function 'convert': .../sim/mips/cp1.c:1425:32: warning: pointer targets in passing argument 1 of 'sim_fpu_to32i' differ in signedness [-Wpointer-sign] status |= sim_fpu_to32i (&result32, &wop, round); ^~~~~~~~~ In file included from .../sim/mips/sim-main.h:67, from .../sim/mips/cp1.c:46: .../sim/mips/../common/sim-fpu.h:270:22: note: expected 'signed32 *' {aka 'int *'} but argument is of type 'unsigned32 *' {aka 'unsigned int *'} INLINE_SIM_FPU (int) sim_fpu_to32i (signed32 *i, const sim_fpu *f, ^~~~~~~~~~~~~ .../sim/mips/cp1.c:1429:32: warning: pointer targets in passing argument 1 of 'sim_fpu_to64i' differ in signedness [-Wpointer-sign] status |= sim_fpu_to64i (&result64, &wop, round); ^~~~~~~~~ In file included from .../sim/mips/sim-main.h:67, from .../sim/mips/cp1.c:46: .../sim/mips/../common/sim-fpu.h:274:22: note: expected 'signed64 *' {aka 'long int *'} but argument is of type 'unsigned64 *' {aka 'long unsigned int *'} INLINE_SIM_FPU (int) sim_fpu_to64i (signed64 *i, const sim_fpu *f, ^~~~~~~~~~~~~ .../sim/mips/cp1.c: In function 'convert_ps': .../sim/mips/cp1.c:1528:34: warning: pointer targets in passing argument 1 of 'sim_fpu_to32i' differ in signedness [-Wpointer-sign] status_u |= sim_fpu_to32i (&res_u, &wop_u, round); ^~~~~~ In file included from .../sim/mips/sim-main.h:67, from .../sim/mips/cp1.c:46: .../sim/mips/../common/sim-fpu.h:270:22: note: expected 'signed32 *' {aka 'int *'} but argument is of type 'unsigned32 *' {aka 'unsigned int *'} INLINE_SIM_FPU (int) sim_fpu_to32i (signed32 *i, const sim_fpu *f, ^~~~~~~~~~~~~ .../sim/mips/cp1.c:1529:34: warning: pointer targets in passing argument 1 of 'sim_fpu_to32i' differ in signedness [-Wpointer-sign] status_l |= sim_fpu_to32i (&res_l, &wop_l, round); ^~~~~~ In file included from .../sim/mips/sim-main.h:67, from .../sim/mips/cp1.c:46: .../sim/mips/../common/sim-fpu.h:270:22: note: expected 'signed32 *' {aka 'int *'} but argument is of type 'unsigned32 *' {aka 'unsigned int *'} INLINE_SIM_FPU (int) sim_fpu_to32i (signed32 *i, const sim_fpu *f, ^~~~~~~~~~~~~ 2021-11-06 Alan Modra Modernise yyerror Newer versions of bison emit a prototype for yyerror void yyerror (const char *); This clashes with some of our old code that declares yyerror to return an int. Fix that in most cases by modernizing yyerror. bfin-parse.y uses the return value all over the place, so for there disable generation of the prototype as specified by posix. binutils/ * arparse.y (yyerror): Return void. * dlltool.c (yyerror): Likewise. * dlltool.h (yyerror): Likewise. * sysinfo.y (yyerror): Likewise. * windmc.h (yyerror): Likewise. * mclex.c (mc_error): Extract from .. (yyerror): ..here, both now returning void. gas/ * config/bfin-parse.y (yyerror): Define. (yyerror): Make static. * itbl-parse.y (yyerror): Return void. ld/ * deffilep.y (def_error): Return void. 2021-11-06 Alan Modra ubsan: undefined shift in mach-o.c This one was logically wrong too. If file_ptr was 64 bits, then -1U is extended to 0x00000000ffffffff, probably not what was intended here. * mach-o.c (FILE_ALIGN): Correct expression. 2021-11-06 Fangrui Song readelf: Support RELR in -S and -d and output readelf -r dumping support is not added in this patch. include/ * elf/common.h: Add SHT_RELR, DT_RELR{,SZ,ENT} bfd/ * elf.c (_bfd_elf_print_private_bfd_data): Add DT_RELR{,SZ,ENT}. binutils/ * readelf.c (get_dynamic_type): Add DT_RELR{,SZ,ENT}. (get_section_type_name): Add SHT_RELR. 2021-11-06 Fangrui Song readelf: Make DT_PREINIT_ARRAYSZ's output style match DT_INIT_ARRAYSZ The output now looks like: - 0x0000000000000021 (PREINIT_ARRAYSZ) 0x10 + 0x0000000000000021 (PREINIT_ARRAYSZ) 16 (bytes) 0x0000000000000019 (INIT_ARRAY) 0xbefc90 0x000000000000001b (INIT_ARRAYSZ) 536 (bytes) * readelf.c (process_dynamic_section): Handle DT_PREINIT_ARRAYSZ. 2021-11-06 Mike Frysinger sim: clarify license text via COPYING file The project has been using GPL v3 for a while now in the source files, and the arm & ppc ports have carried a copy of the COPYING file. Lets move those up to the top sim dir like other projects to make it clear. Also drop the ppc/COPYING.LIB as it's not really referenced by any source as everything is GPL v3. 2021-11-06 GDB Administrator Automatic date update in version.in 2021-11-05 Tom Tromey Introduce make_unique_xstrndup This adds a new make_unique_xstrndup function, which is the "n" analogue of make_unique_xstrdup. It also updates a couple existing places to use this function. 2021-11-05 Pedro Alves Avoid /proc/pid/mem races (PR 28065) PR 28065 (gdb.threads/access-mem-running-thread-exit.exp intermittent failure) shows that GDB can hit an unexpected scenario -- it can happen that the kernel manages to open a /proc/PID/task/LWP/mem file, but then reading from the file returns 0/EOF, even though the process hasn't exited or execed. "0" out of read/write is normally what you get when the address space of the process the file was open for is gone, because the process execed or exited. So when GDB gets the 0, it returns memory access failure. In the bad case in question, the process hasn't execed or exited, so GDB fails a memory access when the access should have worked. GDB has code in place to gracefully handle the case of opening the /proc/PID/task/LWP/mem just while the LWP is exiting -- most often the open fails with EACCES or ENOENT. When it happens, GDB just tries opening the file for a different thread of the process. The testcase is written such that it stresses GDB's logic of closing/reopening the /proc/PID/task/LWP/mem file, by constantly spawning short lived threads. However, there's a window where the kernel manages to find the thread, but the thread exits just after and clears its address space pointer. In this case, the kernel creates a file successfully, but the file ends up with no address space associated, so a subsequent read/write returns 0/EOF too, just like if the whole process had execed or exited. This is the case in question that GDB does not handle. Oleg Nesterov gave this suggestion as workaround for that race: gdb can open(/proc/pid/mem) and then read (say) /proc/pid/statm. If statm reports something non-zero, then open() was "successfull". I think that might work. However, I didn't try it, because I realized we have another nasty race that that wouldn't fix. The other race I realized is that because we close/reopen the /proc/PID/task/LWP/mem file when GDB switches to a different inferior, then it can happen that GDB reopens /proc/PID/task/LWP/mem just after a thread execs, and before GDB has seen the corresponding exec event. I.e., we can open a /proc/PID/task/LWP/mem file accessing the post-exec address space thinking we're accessing the pre-exec address space. A few months back, Simon, Oleg and I discussed a similar race: [Bug gdb/26754] Race condition when resuming threads and one does an exec https://sourceware.org/bugzilla/show_bug.cgi?id=26754 The solution back then was to make the kernel fail any ptrace operation until the exec event is consumed, with this kernel commit: commit dbb5afad100a828c97e012c6106566d99f041db6 Author: Oleg Nesterov AuthorDate: Wed May 12 15:33:08 2021 +0200 Commit: Linus Torvalds CommitDate: Wed May 12 10:45:22 2021 -0700 ptrace: make ptrace() fail if the tracee changed its pid unexpectedly This however, only applies to ptrace, not to the /proc/pid/mem file opening case. Also, even if it did apply to the file open case, we would want to support current kernels until such a fix is more wide spread anyhow. So all in all, this commit gives up on the idea of only ever keeping one /proc/pid/mem file descriptor open. Instead, make GDB open a /proc/pid/mem per inferior, and keep it open until the inferior exits, is detached or execs. Make GDB open the file right after the inferior is created or is attached to or forks, at which point we know the inferior is stable and stopped and isn't thus going to exec, or have a thread exit, and so the file open won't fail (unless the whole process is SIGKILLed from outside GDB, at which point it doesn't matter whether we open the file). This way, we avoid both races described above, at the expense of using more file descriptors (one per inferior). Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28065 Change-Id: Iff943b95126d0f98a7973a07e989e4f020c29419 2021-11-05 Andrew Burgess gdb/testsuite: use gdb_get_line_number Replaces a hard coded line number with a use of gdb_get_line_number. I suspect that the line number has, over time, come adrift from where it was supposed to be stopping. When the test was first added, line 770 pointed at the final 'return 0' in function main. Over time, as things have been added, line 770 now points at some random location in the middle of main. So, I've marked the 'return 0' with a comment, and now the test will always stop there. I also removed an old comment from 1997 talking about how these tests will only pass with the HP compiler, followed by an additional comment from 2000 saying that the tests now pass with GCC. I get the same results before and after this change. 2021-11-05 Alan Modra PR28541, unstable cie offset in the output of readelf Calculating "0 - pointer" can indeed result in seeming randomness as the pointer address varies. PR 28541 * dwarf.c (display_debug_frames): Don't print cie offset when invalid, print "invalid" instead. Remove now redundant warning. 2021-11-05 Alan Modra Missing va_end in aarch64-dis.c * aarch64-dis.c (extract_fields): Invoke va_end. 2021-11-05 Alan Modra PR28530, Hang in objdump on machine with 196GB RAM Investigating the PR28530 testcase, which has a fuzzed compression header with an enormous size, I noticed that decompress_contents is broken when the size doesn't fit in strm.avail_out. It wouldn't be too hard to support larger sizes (patches welcome!) but for now just stop decompress_contents from returning rubbish. PR 28530 * compress.c (decompress_contents): Fail when uncompressed_size is too big. (bfd_init_section_decompress_status): Likewise. 2021-11-05 Alan Modra asan: alpha-vms: objdump buffer overflows * vms-alpha.c (evax_bfd_print_desc): Sanity check buffer access. (evax_bfd_print_valspec, evax_bfd_print_typspec): Likewise. (evax_bfd_print_dst): Likewise. 2021-11-05 GDB Administrator Automatic date update in version.in 2021-11-04 Simon Marchi gdb: introduce "set index-cache enabled", deprecate "set index-cache on/off" The "set index-cache" command is used at the same time as a prefix command (prefix for "set index-cache directory", for example), and a boolean setting for turning the index-cache on and off. Even though I did introduce that, I now don't think it's a good idea to do something non-standard like this. First, there's no dedicated CLI command to show whether the index-cache is enabled, so it has to be custom output in the "show index-cache handler". Also, it means there's no good way a MI frontend can find out if the index-cache is enabled. "-gdb-show index-cache" doesn't show it in the MI output record: (gdb) interpreter-exec mi "-gdb-show index-cache" ~"\n" ~"The index cache is currently disabled.\n" ^done,showlist={option={name="directory",value="/home/simark/.cache/gdb"}} Fix this by introducing "set/show index-cache enabled on/off", regular boolean setting commands. Keep commands "set index-cache on" and "set index-cache off" as deprecated aliases of "set index-cache enabled", with respectively the default arguments "on" and "off". Update tests using "set index-cache on/off" to use the new command. Update the regexps in gdb.base/maint.exp to figure out whether the index-cache is enabled or not. Update the doc to mention the new commands. Change-Id: I7d5aaaf7fd22bf47bd03e0023ef4fbb4023b37b3 2021-11-04 Simon Marchi gdb: pass/return setting setter/getter scalar values by value The getter and setter in struct setting always receive and return values by const reference. This is not necessary for scalar values (like bool and int), but more importantly it makes it a bit annoying to write a getter, you have to use a scratch static variable or something similar that you can refer to: const bool & my_getter () { static bool value; value = function_returning_bool (); return value; } Change the getter and setter function signatures to receive and return value by value instead of by reference, when the underlying data type is scalar. This means that string-based settings will still use references, but all others will be by value. The getter above would then be re-written as: bool my_getter () { return function_returning_bool (); } This is useful for a patch later in this series that defines a boolean setting with a getter and a setter. Change-Id: Ieca3a2419fcdb75a6f75948b2c920b548a0af0fd 2021-11-04 Simon Marchi gdb: remove command_class enum class_deprecated The class_deprecated enumerator isn't assigned anywhere, so remove it. Commands that are deprecated have cmd_list_element::cmd_deprecated set instead. Change-Id: Ib35e540915c52aa65f13bfe9b8e4e22e6007903c 2021-11-04 Simon Marchi gdb: remove unnecessary cmd_list_element::aliases nullptr checks Remove two unnecessary nullptr checks. If aliases is nullptr, then the for loops will simply be skipped. Change-Id: I9132063bb17798391f8d019af305383fa8e0229f 2021-11-04 Simon Marchi gdbserver: re-generate configure I get some diffs when running autoconf in gdbserver, probably leftovers from commit 5dfe4bfcb969 ("Fix format_pieces selftest on Windows"). Re-generate configure in that directory. Change-Id: Icdc9906af95fbaf1047a579914b2983f8ec5db08 2021-11-04 H.J. Lu Revert "bfd: Always check sections with the corrupt size" This reverts commit e0f7ea91436dd308a094c4c101fd4169e8245a91. 2021-11-04 H.J. Lu bfd: Always check sections with the corrupt size Always check sections with the corrupt size for non-MMO files. Skip MMO files for compress_status == COMPRESS_SECTION_NONE since MMO has special handling for COMPRESS_SECTION_NONE. PR binutils/28530 * compress.c (bfd_get_full_section_contents): Always check sections with the corrupt size. 2021-11-04 Nelson Chu RISC-V: Clarify the behavior of .option rvc or norvc. Add/Remove the rvc extension to/from the riscv_subsets once the .option rvc/norvc is set. So that we don't need to always check the riscv_opts.rvc in the riscv_subset_supports, just call the riscv_lookup_subset to search the subset list is enough. Besides, we will need to dump the instructions according to the elf architecture attributes. That means the dis-assembler needs to parse the architecture string from the elf attribute before dumping any instructions, and also needs to recognized the INSN_CLASS* classes from riscv_opcodes. Therefore, I suppose some functions will need to be moved from gas/config/tc-riscv.c to bfd/elfxx-riscv.c, including riscv_multi_subset_supports and riscv_subset_supports. This is one of the reasons why we need this patch. This patch passes the gcc/binutils regressions of rv32emc-elf, rv32i-elf, rv64gc-elf and rv64gc-linux toolchains. bfd/ * elfxx-riscv.c (riscv_remove_subset): Remove the extension from the subset list. (riscv_update_subset): Add/Remove an extension to/from the subset list. This is used for the .option rvc or norvc. * elfxx-riscv.h: Added the extern bool riscv_update_subset. gas/ * config/tc-riscv.c (riscv_set_options): Removed the unused rve flag. (riscv_opts): Likewise. (riscv_set_rve): Removed. (riscv_subset_supports): Removed the riscv_opts.rvc check. (riscv_set_arch): Don't need to call riscv_set_rve. (reg_lookup_internal): Call riscv_subset_supports to check whether the rve is supported. (s_riscv_option): Add/Remove the rvc extension to/from the subset list once the .option rvc/norvc is set. 2021-11-04 Mike Frysinger sim: mips: fix missing prototype in multi-run generation The multi-run logic for mips involves a bit of codegen and rewriting of files to include per-architecture prefixes. That can result in files with missing prototypes which cause compiler errors. In the case of mips-sde-elf targets, we have: $srcdir/m16run.c -> $builddir/m16mips64r2_run.c sim_engine_run -> m16mips64r2_engine_run $srcdir/micromipsrun.c -> micromipsmicromips_run.c sim_engine_run -> micromips64micromips_engine_run micromipsmicromips_run.c:80:1: error: no previous prototype for 'micromips64micromips_engine_run' [-Werror=missing-prototypes] 80 | micromips64micromips_engine_run (SIM_DESC sd, int next_cpu_nr, int nr_cpus, We generate headers for those prototypes in the configure script, but only include them in the generated multi-run.c file. Update the rewrite logic to turn the sim-engine.h include into the relevant generated engine include so these files also have their prototypes. $srcdir/m16run.c -> $builddir/m16mips64r2_run.c sim-engine.h -> m16mips64r2_engine.h $srcdir/micromipsrun.c -> micromipsmicromips_run.c sim-engine.h -> micromips64micromips_engine.h 2021-11-04 Alan Modra PR28540, segmentation fault on NULL byte_get PR 28540 * objdump.c (dump_bfd): Don't attempt load_separate_debug_files when byte_get is NULL. 2021-11-04 GDB Administrator Automatic date update in version.in 2021-11-03 Mike Frysinger sim: ppc: inline common sim-fpu.c logic We will never bother building w/out a ../common/ sim directory, so drop ancient logic supporting that method. 2021-11-03 Mike Frysinger sim: ppc: switch to common builds for callback objects We don't need to build this anymore ourselves since the common build includes it and produces the same object code. We also need to pull in the split constant modules after the refactoring and pulling them out of nltvals.def & targ-map.o. This doesn't matter for the sim directly, but does for gdb and other users of libsim. We also delete some conditional source tree logic since we already require this be the "new" combined tree with a ../common/ dir. This has been the case for decades at this point. 2021-11-03 Simon Marchi gdb: fix gnu-nat build When building gnu-nat.c, we get: CXX gnu-nat.o gnu-nat.c: In member function 'virtual void gnu_nat_target::create_inferior(const char*, const string&, char**, int)': gnu-nat.c:2117:13: error: 'struct inf' has no member named 'target_is_pushed' 2117 | if (!inf->target_is_pushed (this)) | ^~~~~~~~~~~~~~~~ gnu-nat.c:2118:10: error: 'struct inf' has no member named 'push_target' 2118 | inf->push_target (this); | ^~~~~~~~~~~ This is because of a confusion between the generic `struct inferior` variable and the gnu-nat-specific `struct inf` variable. Fix by referring to `inferior`, not `inf`. Adjust the comment on top of `struct inf` to clarify the purpose of that type. Co-Authored-By: Andrea Monaco Change-Id: I2fe2f7f6ef61a38d79860fd262b08835c963fc77 2021-11-03 Simon Marchi gdb/testsuite: set ASAN_OPTIONS=detect_leaks=0 while running tests We see some additional failures when running the testsuite against a GDB compiled with ASan, compared to a GDB compiled without ASan. Some of them are caused by the memory leak report shown by the GDB process when it exits, and the fact that it makes it exit with a non-zero exit code. I generally try to remember to set ASAN_OPTIONS=detect_leaks=0 in my environment when running the tests, but I don't always do it. I think it would be nice if the testsuite did it. I don't see any use to have leak detection when running the tests. That is, unless we ever have a test that ensures GDB doesn't leak memory, which isn't going to happen any time soon. Here are some tests I found that were affected by this: gdb.base/batch-exit-status.exp gdb.base/many-headers.exp gdb.base/quit.exp gdb.base/with-mf.exp gdb.dwarf2/gdb-add-index.exp gdb.dwarf2/gdb-add-index-symlink.exp gdb.dwarf2/imported-unit-runto-main.exp Change-Id: I784c7df8a13979eb96587f735c1d33ba2cc6e0ca 2021-11-03 Tom Tromey Use section name in warnings in display_debug_loc While looking at an apparently malformed executable with "readelf --debug-dump=loc", I got this warning: readelf: ./main: Warning: There is a hole [0x89 - 0x95] in .debug_loc section. However, the executable only has a .debug_loclists section. This patch fixes the warning messages in display_debug_loc to use the name of the section that is being processed. binutils/ChangeLog 2021-11-03 Tom Tromey * dwarf.c (display_debug_loc): Use section name in warnings. 2021-11-03 Luis Machado [AArch64] Make gdbserver register set selection dynamic The current register set selection mechanism for AArch64 is static, based on a pre-populated array of register sets. This means that we might potentially probe register sets that are not available. This is OK if the kernel errors out during ptrace, but probing the tag_ctl register, for example, does not result in a ptrace error if the kernel supports the tagged address ABI but not MTE (PR 28355). Making the register set selection dynamic, based on feature checks, solves this and simplifies the code a bit. It allows us to list all of the register sets only once, and pick and choose based on HWCAP/HWCAP2 or other properties. I plan to backport this fix to GDB 11 as well. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28355 2021-11-03 Jan Kratochvil Fix LD_PRELOAD=/usr/lib64/libasan.so.6 gdb Currently for a binary compiled normally (without -fsanitize=address) but with LD_PRELOAD of ASAN one gets: $ ASAN_OPTIONS=detect_leaks=0:alloc_dealloc_mismatch=1:abort_on_error=1:fast_unwind_on_malloc=0 LD_PRELOAD=/usr/lib64/libasan.so.6 gdb ================================================================= ==1909567==ERROR: AddressSanitizer: alloc-dealloc-mismatch (malloc vs operator delete []) on 0x602000001570 #0 0x7f1c98e5efa7 in operator delete[](void*) (/usr/lib64/libasan.so.6+0xb0fa7) ... 0x602000001570 is located 0 bytes inside of 2-byte region [0x602000001570,0x602000001572) allocated by thread T0 here: #0 0x7f1c98e5cd1f in __interceptor_malloc (/usr/lib64/libasan.so.6+0xaed1f) #1 0x557ee4a42e81 in operator new(unsigned long) (/usr/libexec/gdb+0x74ce81) SUMMARY: AddressSanitizer: alloc-dealloc-mismatch (/usr/lib64/libasan.so.6+0xb0fa7) in operator delete[](void*) ==1909567==HINT: if you don't care about these errors you may set ASAN_OPTIONS=alloc_dealloc_mismatch=0 ==1909567==ABORTING Despite the code called properly operator new[] and operator delete[]. But GDB's new-op.cc provides its own operator new[] which gets translated into malloc() (which gets recogized as operatore new(size_t)) but as it does not translate also operators delete[] Address Sanitizer gets confused. The question is how many variants of the delete operator need to be provided. There could be 14 operators new but there are only 4, GDB uses 3 of them. There could be 16 operators delete but there are only 6, GDB uses 2 of them. It depends on libraries and compiler which of the operators will get used. Currently being used: U operator new[](unsigned long) U operator new(unsigned long) U operator new(unsigned long, std::nothrow_t const&) U operator delete[](void*) U operator delete(void*, unsigned long) Tested on x86_64-linux. 2021-11-03 Alan Modra asan: dlltool buffer overflow: embedded NUL in string yyleng gives the pattern length, xstrdup just copies up to the NUL. So it is quite possible writing at an index of yyleng-2 overflows the xstrdup allocated string buffer. xmemdup quite handily avoids this problem, even writing the terminating NUL over the trailing quote. Use it in ldlex.l too where we'd already had a report of this problem and fixed it by hand, and to implement xmemdup0 in gas. binutils/ * deflex.l (single and double quote strings): Use xmemdup. gas/ * as.h (xmemdup0): Use xmemdup. ld/ PR 20906 * ldlex.l (double quote string): Use xmemdup. 2021-11-03 Mike Frysinger sim: mloop: mark a few conditionally used funcs as unused These are marked inline, so building w/gcc at higher optimization levels will automatically discard them. But building with -O0 will trigger unused function warnings, so fix that. The common before/after cover functions in the common mloop generator are not used by all architecture ports. Doesn't seem to be a hard requirement, so marking them optional (i.e. unused) is fine. The cris execute function is conditionally used depending on the fast-build mode settings, so mark it unused too. 2021-11-03 Alan Modra asan: assert (addr_ranges) <= (start) That assert would be more obvious if it were reported as "addr_ranges <= end_ranges". Fix that by using the obvious variable in the final loop. Stop the assertion by using a signed comparison: It's possible for the rounding up of the arange pointer to exceed the end of the block when the block size is fuzzed. * dwarf.c (display_debug_aranges): Use "end_ranges" in loop displaying ranges rather that "start". Simplify rounding up to 2*address_size boundary. Use signed comparison in loop. 2021-11-03 Mike Frysinger sim: hoist cgen mloop rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We have to extend the genmloop.sh logic a bit to allow outputting to a subdir since it always assumed cwd was the right place. We leave the cgen maintainer rules in the subdirs for now as they aren't normally run, and they rely on cgen logic that has not yet been generalized. 2021-11-03 Mike Frysinger sim: hoist mn10300 & v850 igen rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. We leave the mips rules in place as they depend on complicated arch-specific configure logic that needs to be untangled first. 2021-11-03 Mike Frysinger sim: hoist gencode & opc2c build rules up to common builds These rules don't depend on the target compiler settings, so hoist the build logic up to the common builds for better parallelization. 2021-11-03 Mike Frysinger opcodes: d10v: simplify header includes This file doesn't use anything from bfd (sysdep.h), so drop that include. This avoids an implicit dependency on the generated config.h which can be problematic for build-time tools. Also swap stdio.h for stddef.h. This file isn't doing or using any I/O structures, but it does need NULL. 2021-11-03 Alan Modra PR28523, ld.bfd created undefined symbols on ppc64 This patch removes any fake (linker created) function descriptor symbol if its code entry symbol isn't dynamic, to ensure bogus dynamic symbols are not created. The change to func_desc_adjust requires that it be run only once, which means ppc64_elf_tls_setup can't call it for just a few selected symbols. PR 28523 * elf64-ppc.c (func_desc_adjust): If a function entry sym is not dynamic and has no plt entry, hide any associated fake function descriptor symbol. (ppc64_elf_edit): Move func_desc_adjust iteration over syms to.. (ppc64_elf_tls_setup): ..here. 2021-11-03 GDB Administrator Automatic date update in version.in 2021-11-02 Tom de Vries [gdb/tdep, rs6000] Don't skip system call in skip_prologue I ran into a case where a breakpoint on _exit never triggered, because it was set past the end of the _exit prologue, past the end of the exit_group system call (which does not return). More concretely, the breakpoint was set at the last insn show here: ... Dump of assembler code for function _exit: 0x00007ffff7e42ea0 <+0>: 12 00 4c 3c addis r2,r12,18 0x00007ffff7e42ea4 <+4>: 60 43 42 38 addi r2,r2,17248 0x00007ffff7e42ea8 <+8>: 00 00 00 60 nop 0x00007ffff7e42eac <+12>: f8 ff e1 fb std r31,-8(r1) 0x00007ffff7e42eb0 <+16>: 78 1b 7f 7c mr r31,r3 0x00007ffff7e42eb4 <+20>: f0 ff c1 fb std r30,-16(r1) 0x00007ffff7e42eb8 <+24>: ea 00 00 38 li r0,234 0x00007ffff7e42ebc <+28>: a0 8b 22 e9 ld r9,-29792(r2) 0x00007ffff7e42ec0 <+32>: 78 fb e3 7f mr r3,r31 0x00007ffff7e42ec4 <+36>: 14 6a c9 7f add r30,r9,r13 0x00007ffff7e42ec8 <+40>: 02 00 00 44 sc 0x00007ffff7e42ecc <+44>: 26 00 00 7c mfcr r0 0x00007ffff7e42ed0 <+48>: 00 10 09 74 andis. r9,r0,4096 ... Fix this by treating system calls the same as branches in skip_prologue: by default, don't skip, such that the breakpoint is set at 0x00007ffff7e42eb8 instead. Tested on ppc64le-linux, on a power 8 machine. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28527 2021-11-02 Tom de Vries [gdb/testsuite] Handle SIGILL in two gdb.arch powerpc test-cases On powerpc64le-linux, with test-case gdb.arch/powerpc-addpcis.exp I run into SIGILL: ... (gdb) PASS: gdb.arch/powerpc-addpcis.exp: get hexadecimal valueof "$r3" stepi^M ^M Program terminated with signal SIGILL, Illegal instruction.^M The program no longer exists.^M (gdb) PASS: gdb.arch/powerpc-addpcis.exp: set r4 ... because it's a power9 insn, and I'm running on a power8 machine. Fix this by handling the SIGILL. Likewise in gdb.arch/powerpc-lnia.exp. Tested on powerpc64le-linux. 2021-11-02 Andrew Burgess gdb/sim: update my email address gdb: * MAINTAINERS (Global Maintainers): Update my address. (Responsible Maintainers): Likewise. (Write After Approval): Likewise. sim: * MAINTAINERS (Global Maintainers): Update my address. 2021-11-02 Tom de Vries [gdb/testsuite] Fix stepi test-cases with unix/-m32/-fPIE/-pie When running test-case gdb.base/step-indirect-call-thunk.exp with target board unix/-m32/-fPIE/-pie, I run into: ... (gdb) stepi^M 0x5655552e 22 { /* inc.1 */^M (gdb) stepi^M 0x56555530 22 { /* inc.1 */^M (gdb) stepi^M 0x565555f7 in __x86.get_pc_thunk.ax ()^M (gdb) FAIL: gdb.base/step-indirect-call-thunk.exp: stepi into return thunk ... In contrast, with unix/-m32 we have instead: ... (gdb) stepi^M 0x08048407 22 { /* inc.1 */^M (gdb) stepi^M 23 return x + 1; /* inc.2 */^M (gdb) stepi^M 0x0804840c 23 return x + 1; /* inc.2 */^M (gdb) stepi^M 24 } /* inc.3 */^M (gdb) stepi^M 0x08048410 24 } /* inc.3 */^M (gdb) stepi^M 0x0804848f in __x86_return_thunk ()^M (gdb) PASS: gdb.base/step-indirect-call-thunk.exp: stepi into return thunk ... The test-case doesn't expect to run into __x86.get_pc_thunk.ax, which is a PIC helper function for x86_64-linux. Fix this by insn-stepping through it. Likewise in a few other test-cases. Tested on x86_64-linux. 2021-11-02 GDB Administrator Automatic date update in version.in 2021-11-01 Alan Modra ARM: match armeb output for unwind-pacbti-m test * testsuite/gas/arm/unwind-pacbti-m.d: Match armeb output. 2021-11-01 Bruno Larsen [gdb/doc]: Updated manpages to be consistent with help Updated manpages to be consistent with help information provided by the binary. The main changes are: * Making all long-form options have '--', instead of a single '-'; * added most of the missing options to the manpage; * removed the information about using '+' instead of '-', since it doesn't seem to be supported anymore. This also fixes 2 upstream bugs: * https://sourceware.org/bugzilla/show_bug.cgi?id=23965; by adding --args to the manpage * https://sourceware.org/bugzilla/show_bug.cgi?id=10619; by adding the double dashes 2021-11-01 Alan Modra macho-o archive sanity checks Anti-fuzzing checks. * mach-o.c (bfd_mach_o_fat_archive_p): Sanity check entry offset and size against file size. 2021-11-01 Alan Modra objcopy buffer overflow "tocopy" in this code was an int, which when the size to be copied was larger than MAXINT could result in tocopy being negative. A negative value of course is less than BUFSIZE, but when converted to bfd_size_type is extremely large. PR 995 * objcopy.c (copy_unknown_object): Correct calculation of "tocopy". Use better variable types. 2021-11-01 Przemyslaw Wirkus arm: add armv9-a architecture to -march Update also include: + New value of Tag_CPU_arch EABI attribute (22) is added. + Updated missing Tag_CPU_arch EABI attributes. + Updated how we combine archs 'v4t_plus_v6_m' as this mechanism have to handle new Armv9 as well. Regression tested on `arm-none-eabi` cross Binutils and no issues. bfd/ * archures.c: Define bfd_mach_arm_9. * bfd-in2.h (bfd_mach_arm_9): Define bfd_mach_arm_9. * cpu-arm.c: Add 'armv9-a' option to -march. * elf32-arm.c (using_thumb2_bl): Update assert check. (arch_has_arm_nop): Add TAG_CPU_ARCH_V9. (bfd_arm_get_mach_from_attributes): Add case for TAG_CPU_ARCH_V9. Update assert. (tag_cpu_arch_combine): Updated table. (v9): New table.. binutils/ * readelf.c (arm_attr_tag_CPU_arch): Update with elfcpp/ * arm.h: Update TAG_CPU_ARCH_ enums with correct values. gas/ * NEWS: Update docs. * config/tc-arm.c (get_aeabi_cpu_arch_from_fset): Return Armv9-a for -amarch=all. (aeabi_set_public_attributes): Update assert. * doc/c-arm.texi: Update docs. * testsuite/gas/arm/armv9-a_arch.d: New test. * testsuite/gas/arm/attr-march-all.d: Update test with v9. include/ * elf/arm.h Update TAG_CPU_ARCH_ defines with correct values. * opcode/arm.h (ARM_EXT3_V9A): New macro. (ARM_ARCH_NONE): Updated with arm_feature_set.core size. (FPU_NONE): Updated. (ARM_ANY): Updated. (ARM_ARCH_UNKNOWN): New macro. (ARM_FEATURE_LOW): Updated. (ARM_FEATURE_CORE): Updated. (ARM_FEATURE_CORE_LOW): Updated. (ARM_FEATURE_CORE_HIGH): Updated. (ARM_FEATURE_COPROC): Updated. (ARM_FEATURE): Updated. (ARM_FEATURE_ALL): New macro. opcodes/ * arm-dis.c (select_arm_features): Support bfd_mach_arm_9. Also Update bfd_mach_arm_unknown to use new macro ARM_ARCH_UNKNOWN. 2021-11-01 Mike Frysinger sim: iq2000: reduce -Wno-error scope Clean up the warnings in sim-if, then reduce the -Werror disable to the files that still aren't clean that now that we require GNU make and can set variables on a per-object basis. sim: lm32: reduce -Wno-error scope Clean up some warnings in dv-lm32cpu, and all in sim-if, then reduce the -Werror disable to the files that still aren't clean that now that we require GNU make and can set variables on a per-object basis. sim: frv: reduce -Wno-error scope Only two files in here still generates warnings, so reduce the -Werror disable to that now that we require GNU make and can set variables on a per-object basis. sim: m32r: reduce -Wno-error scope Only two files in here still generates warnings, so reduce the -Werror disable to that now that we require GNU make and can set variables on a per-object basis. sim: mips: reduce -Wno-error scope Fix a few printf warnings in sim-main.c, and then we're left with only one file in here still generating warnings, so reduce the -Werror disable to that alone now that we require GNU make and can set variables on a per-object basis. sim: erc32: reduce -Wno-error scope Only one file in here still generates warnings, so reduce the -Werror disable to that alone now that we require GNU make and can set variables on a per-object basis. sim: cris: reduce -Wno-error scope Only two files in here still generates warnings, so reduce the -Werror disable to that now that we require GNU make and can set variables on a per-object basis. sim: sh: reduce -Wno-error scope Only one file in here still generates warnings, so reduce the -Werror disable to that alone now that we require GNU make and can set variables on a per-object basis. sim: or1k: build with -Werror The only warnings left in this port are a few maybe-uninitialized, but we don't abort the build for them, so turn on -Werror everywhere. sim: igen: minor build output alignment fix The custom echo was off by one space relative to all the others. sim: ppc: fix the printf fix for 32-bit systems The time delta is a 64-bit value too. sim: m68hc11: clean up pointer casts The void *data field is used to past arbitrary data between event handlers, and these are using it to pass an integer. Fix up the casts to avoid using (long) to cast to/from pointers since there is no guarantee that's the right size. sim: d10v: clean up pointer casts Use %p to print pointers instead of trying to cast them to longs. sim: bfin: cast pointers using uintptr_t We can't assume that sizeof(long) == sizeof(void*), so change all these casts over to uintptr_t. sim: ppc: clean up printf format handling Don't blindly cast every possible type to (long). Change to the right printf format specifier whether it be a 64-bit type or a pointer. sim: ppc: switch core types to stdint.h types There's no need to define these ourselves anymore, so switch to the stdint.h types. This will be important when we start using PRI* defines with printf formats. sim: mn10300: clean up pointer casts The void *data field is used to past arbitrary data between event handlers, and these are using it to pass an enum. Fix up the casts to avoid using (long) to cast to/from pointers since there is no guarantee that's the right size. sim: events: clean up trace casts Don't blindly cast every possible type to (long). Change to the right printf format specifier whether it be a 64-bit type or a pointer. sim: ppc: handle \r in igen inputs [PR sim/28476] Make sure we consume & ignore \r bytes in inputs in case the file encodings are from a non-LF systems (e.g. Windows). sim: ppc: constify strings in igen tooling 2021-11-01 GDB Administrator Automatic date update in version.in 2021-10-31 Tom Tromey Fix latent bug in DWARF test case On my branch that replaces the DWARF psymtab reader, dw2-stack-boundary.exp started failing. However, when I look at the output in gdb.log, it is correct: file /home/tromey/gdb/build/gdb/testsuite/outputs/gdb.dwarf2/dw2-stack-boundary/dw2-stack-boundary Reading symbols from /home/tromey/gdb/build/gdb/testsuite/outputs/gdb.dwarf2/dw2-stack-boundary/dw2-stack-boundary... During symbol reading: location description stack overflow During symbol reading: location description stack underflow What happens to cause the failure is that the two branches in gdb_test_multiple appear in this order: -re "\r\nDuring symbol reading: location description stack underflow" { [...] -re "\r\nDuring symbol reading: location description stack overflow" { The first one will match the above, without causing the second one to ever match -- leading to a spurious failure. Anchoring the regexps seems to fix the problem, and works for the current gdb as well. 2021-10-31 Tom Tromey Fix unittest.exp failure due to 'set debuginfod' addition The 'set debuginfod' change caused a regression in unittest.exp: Running selftest help_doc_invariants. help doc broken invariant: command 'info set debuginfod' help doc first line is not terminated with a '.' character help doc broken invariant: command 'set debuginfod' help doc first line is not terminated with a '.' character help doc broken invariant: command 'show debuginfod' help doc first line is not terminated with a '.' character Self test failed: self-test failed at ../../binutils-gdb/gdb/unittests/command-def-selftests.c:100 This patch fixes the problem. I'm checking it in. 2021-10-31 Mike Frysinger sim: ppc: use silent build rules here too The ppc codebase is unique and doesn't leverage common/, so have to add silent rules to it specifically. sim: rl78: drop obsolete manual dependency rules We have GNU make generate these for us automatically now, so there's no need to manually specify any deps. sim: drop unused targ-vals.h includes This is used in a few places where it's not needed. Drop the include to avoid the build-time generated header file as we move to drop it. sim: unify callback.o building Now that the use of TARGET_xxx defines have been removed, we can move this to the common logic so we only build it once for multi-targets. sim: nltvals: pull target open flags out into a dedicated source file Like we just did for pulling out the errno & signal maps, pull out the open flag map into a dedicated common file. All newlib ports are using the same map which makes it easy. sim: nltvals: localize TARGET_ defines Code should not be using these directly, instead they should be resolving these dynamically via the open_map. Rework the common callback code that was using the defines to use symbolic names instead, and localize some of the defines in the ARM code (since it's a bit unclear how many different APIs it supports currently), then remove the defines out of the header so no new code can rely on them. sim: nltvals: pull target signal out into a dedicated source file Like we just did for pulling out the errno map, pull out the signal map into a dedicated common file. All newlib ports are using the same signal map which makes it easy. 2021-10-31 Mike Frysinger sim: nltvals: pull target errno out into a dedicated source file The current system maintains a list of target errno constants in the nltvals.def file, then runs a build-time tool to turn that into a C file. This list of errno values is the same for all arches, so we don't need the arch-specific flexibility. Further, these are only for newlib/libgloss environments, which makes it confusing to support other userland runtimes (like Linux). Let's simplify to make this easier to understand & build. We don't namespace the variables yet, but sets up the framework for it. Create a new target-newlib-errno.c template file. The template file is hand written, but the inline map is still automatically generated. This allows us to move it to the common set of objects so it's only built once in a multi-target build. Now we can remove the output from the gentmap build-time tool since it's checked into the tree. Then we stop including the errno lists in nltvals.def since nothing uses it. 2021-10-31 Mike Frysinger sim: erc32: use silent build rules with sis linkage 2021-10-31 Mike Frysinger sim: erc32: fix a few more build warnings Tweak the if indentation & brace style to avoid ambiguous warnings. Add ATTRIBUTE_UNUSED to UART functions that aren't used when FAST_UART is defined (which is the default). 2021-10-31 Orgad Shaneh sim: erc32: fix signedness compatibility and redefinition warnings 2021-10-31 Mike Frysinger sim: add arch-specific conditional logic This will make it easy to include arch-specific logic (build files) as we migrate ports to the common top level build. sim: v850: delete old gencode logic The v850 port used to have a gencode helper, but it was deleted long ago. Clean up the settings that no longer make sense w/out it. sim: common: merge multiple clean commands This provides a minor speedup when cleaning in a multi-target build. sim: m32c: tighten up opc2c build output Drop the single debugging line that repeats the command line option, and use the silent build helpers to tighten up output. sim: tighten up build regen rules Update the makefile & configure related rules to use the silent build helpers. sim: tighten up gencode output Update the gencode rules to use the silent build helpers. sim: igen: tighten up build output Add a new stamp helper for quiet builds, and don't dump the command line options when it runs. That isn't standard tool behavior, and doesn't really seem necessary in any way. sim: tighten up stamp rules Add a new ECHO_STAMP helper and convert existing stamp code over to it. This is mostly common rules and cgen mloop rules. sim: silence stamp touch rules We pretty much never care about these stamp touches, so silence them. Also switch to using $@ when it makes sense. sim: standardize move-if-change rules Use the srcroot path and make them all silent. sim: mips/v850: remove redundant variable setup The common/Make-common.in fragment already provides these variables. 2021-10-31 Orgad Shaneh sim: fix compilation on mingw64 [PR sim/28476] ...by reordering includes. 1. sim-utils.c sim/mips/sim-main.h defines UserMode, while there is a struct in winnt.h which has UserMode as a member. So if sim-main.h is included before winnt.h, compilation fails. 2. ppc registers.h defines CR, which is used as a member in winnt.h. winsock2.h is included by sys/time.h, so sys/time.h has to be included before registers.h. Bug: https://sourceware.org/PR28476 2021-10-31 Alan Modra Don't include coff/pe.h in coff-x86_64.c This (and other) code from coffcode.h is broken for x86_64_coff_vec, and has been ever since support was added in 2006 commit 99ad839030c1 Here, bfd_coff_aoutsz must match coff_swap_aouthdr_out otherwise we end up writing garbage. /* Note that peicode.h fills in a PEAOUTHDR, not an AOUTHDR. include/coff/pe.h sets AOUTSZ == sizeof (PEAOUTHDR)). */ char * buff; bfd_size_type amount = bfd_coff_aoutsz (abfd); buff = (char *) bfd_malloc (amount); if (buff == NULL) return false; coff_swap_aouthdr_out (abfd, & internal_a, buff); amount = bfd_bwrite (buff, amount, abfd); We have removed support for --target=x86_64-coff, likely because it never worked properly, but still produce coff-x86_64.o with --enable-targets=all. This means objcopy can recognize x86_64 COFF files but will write garbage to the output file, a fact found by fuzzers. I suspect x86_64 COFF is still broken after this fix, and mention of coff-x86_64.* should be removed from bfd/Makefile.am. * coff-x86_64.c: Don't include coff/pe.h. (COFF_WITH_pex64): Don't define here. * pe-x86_64.c: Include coff/pe.h and other headers. (PEI_HEADERS): Define. 2021-10-31 Alan Modra Re: PR28420, ecoff fuzzing failures sym_ptr_ptr NULL results in segfaults. PR 28420 * ecoff.c (ecoff_slurp_reloc_table): Don't leave sym_ptr_ptr NULL. 2021-10-31 Alan Modra ubsan: alpha-vms: undefined shift * vms-alpha.c (evax_bfd_print_image): Shift left 1u. PR28518: signed integer overflow & free on unmalloced address PR 28518 * vms-alpha.c (build_module_list): Don't lose malloc buffer address. Use unsigned variables. 2021-10-31 GDB Administrator Automatic date update in version.in 2021-10-30 Simon Marchi gdb: fix gdb.gdb/unittest.exp with C++17 compiler On a machine with gcc 11, I get: FAIL: gdb.gdb/unittest.exp: test_completion: tab complete "maintenance selftest string_v" (second tab) (timeout) FAIL: gdb.gdb/unittest.exp: test_completion: tab complete "maintenance selftest string_vie" (timeout) That's because when compiling with C++ >= 17, we use the standard version of string_view, and don't have a selftest for it. So the list of selftests shown by the tab completion when completing "string_v" differs. Change the test to use the copy_* tests instead. Change-Id: I85f6aa44ee5fc9652b9bd4451e0506b89773526b 2021-10-30 Aaron Merey gdb.texinfo: Expand documentation for debuginfod Add section describing GDB's usage of debuginfod. Refer to this new section in the description of the '--with-debuginfod' configure option. Mention debuginfod in the 'Separate Debug Files' section. 2021-10-30 Aaron Merey gdb: add set/show commands for managing debuginfod Add 'set debuginfod' command. Accepts 'on', 'off' or 'ask' as an argument. 'on' enables debuginfod for the current session. 'off' disables debuginfod for the current session. 'ask' will prompt the user to either enable or disable debuginfod when the next query is about to be performed: This GDB supports auto-downloading debuginfo from the following URLs: ... Enable debuginfod for this session? (y or [n]) y Debuginfod has been enabled. To make this setting permanent, add 'set debuginfod on' to .gdbinit. For interactive sessions, 'ask' is the default. For non-interactive sessions, 'off' is the default. Add 'show debuginfod status' command. Displays whether debuginfod is set to 'on', 'off' or 'ask'. Add 'set/show debuginfod urls' commands. Accepts a string of space-separated debuginfod server URLs to be queried. The default value is copied from the DEBUGINFOD_URLS environment variable. Finally add 'set/show debuginfod verbose' commands to control whether debuginfod-related output is displayed. Verbose output is enabled by default. (gdb) run Starting program: /bin/sleep 5 Download failed: No route to host. Continuing without debug info for /lib64/libc.so.6. If GDB is not built with debuginfod then these commands will just display Support for debuginfod is not compiled into GDB. 2021-10-30 GDB Administrator Automatic date update in version.in 2021-10-29 Simon Marchi gdb: remove TYPE_FIELD_DWARF_BLOCK Remove TYPE_FIELD_DWARF_BLOCK, replace with type::field + field::loc_dwarf_block. Change-Id: I10af9410bb5f46d342b8358a7956998c7e804b64 2021-10-29 Simon Marchi gdb: remove TYPE_FIELD_STATIC_PHYSADDR Remove TYPE_FIELD_STATIC_PHYSADDR replace with type::field + field::loc_physaddr. Change-Id: Ica9bc4a48f34750ec82ec86c298d3ecece81bcbd 2021-10-29 Simon Marchi gdb: remove TYPE_FIELD_STATIC_PHYSNAME Remove TYPE_FIELD_STATIC_PHYSNAME, replace with type::field + field::loc_physname. Change-Id: Ie35d446b67dd1d02f39998b406001bdb7e6d5abb 2021-10-29 Simon Marchi gdb: remove TYPE_FIELD_ENUMVAL Remove TYPE_FIELD_ENUMVAL, replace with type::field + field::loc_enumval. Change-Id: I2ada73e4635aad3363ce2eb22c1dc52698ee2072 2021-10-29 Simon Marchi gdb: remove TYPE_FIELD_BITPOS Remove TYPE_FIELD_BITPOS, replace its uses with type::field + field::loc_bitpos. Change-Id: Iccd8d5a77e5352843a837babaa6bd284162e0320 2021-10-29 Simon Marchi gdb: remove TYPE_FIELD_LOC_KIND Remove TYPE_FIELD_LOC_KIND, replace its uses with type::field + field::loc_kind. Change-Id: Ib124a26365df82ac1d23df7962d954192913bd90 2021-10-29 Simon Marchi gdb: remove FIELD_DWARF_BLOCK macro Remove FIELD_DWARF_BLOCK, replace its uses with field::loc_dwarf_block. Change-Id: I66b7d6a960cb5e341e61e21bd3cc9a6ac26de6a8 2021-10-29 Simon Marchi gdb: remove FIELD_STATIC_PHYSADDR macro Remove FIELD_LOC_KIND_PHYSADDR, replace its uses with field::loc_physaddr. Change-Id: Ifd8b2bdaad75f42bfb1404ef8c396ffe7e10ac55 2021-10-29 Simon Marchi gdb: remove FIELD_STATIC_PHYSNAME macro Remove FIELD_STATIC_PHYSNAME, replace its uses with field::loc_physname. Change-Id: Iaa8952410403b4eb5bbd68411feea27e2405d657 2021-10-29 Simon Marchi gdb: remove FIELD_ENUMVAL macro Remove FIELD_ENUMVAL, replace its uses with field::loc_enumval. Change-Id: Id4861cee91a8bb583a9836f1aa5da0a320fbf4d9 2021-10-29 Simon Marchi gdb: remove FIELD_BITPOS macro Remove FIELD_BITPOD, replace its uses with field::loc_bitpos. Change-Id: Idb99297e0170661254276c206383a7e9bf1a935a 2021-10-29 Simon Marchi gdb: remove FIELD_LOC_KIND macro Remove FIELD_LOC_KIND, replace its uses with field::loc_kind or call_site_target::loc_kind. Change-Id: I0368d8c3ea269d491bb215aa70e32edbdf55f389 2021-10-29 Tom Tromey Add gdb.Architecture.integer_type Python function This adds a new Python function, gdb.Architecture.integer_type, which can be used to look up an integer type of a given size and signed-ness. This is useful to avoid dependency on debuginfo when a particular integer type would be useful. v2 moves this to be a method on gdb.Architecture and addresses other review comments. 2021-10-29 Tom Tromey Remove ada_value_print_inner I noticed that the only caller of ada_value_print_inner is valprint.c:do_val_print (via ada_language::value_print_inner), meaning that the try/catch logic in this function is redundant. This patch removes the wrapper function. Regression tested on x86-64 Fedora 34. 2021-10-29 Tom Tromey Document resolve_dynamic_type oddity Today I re-learned that resolve_dynamic_type can return a type for which is_dynamic_type returns true. This can happen for an array whose elements have dynamic type -- the array is reported as dynamic, but resolving the elements would be incorrect, because each element might have a different type after resolution. You can see the special case in resolve_dynamic_array_or_string: if (ary_dim != NULL && ary_dim->code () == TYPE_CODE_ARRAY) ... else ... I looked into having the TYPE_CODE_ARRAY case in is_dynamic_type_internal follow this same logic, but that breaks down on the gdb.fortran/dynamic-ptype-whatis.exp test case. In particular this code in fortran_undetermined::evaluate: value *callee = std::get<0> (m_storage)->evaluate (nullptr, exp, noside); if (noside == EVAL_AVOID_SIDE_EFFECTS && is_dynamic_type (value_type (callee))) callee = std::get<0> (m_storage)->evaluate (nullptr, exp, EVAL_NORMAL); ... relies on is_dynamic_type returning true for such an array. I wasn't really sure of the best way to fix this, so in the meantime I wrote this patch, which documents the oddity so that I might have a chance of remembering this in the future. 2021-10-29 Tom Tromey Avoid self-test failures on x86-linux The disassembly tests in "maint selftest" will fail on x86-linux. This happens because opcodes rejects an attempt to disassemble for an arch with a 64-bit address size when bfd_vma is 32-bit. This patch avoids this problem by avoiding the test in this case. I chose to do it this way because this seems to be the only situation where opcodes checks the size of bfd_vma. For v2 of this patch, I've also updated memory_error_test to do the same thing. This is needed due to the "improve error reporting from the disassembler" patch. 2021-10-29 Tom de Vries [gdb/build] Fix build with --disable-unit-tests A build with --disable-unit-tests currently run into: ... ld: maint.o: in function \ `maintenance_selftest_completer(cmd_list_element*, completion_tracker&, char const*, char const*)': src/gdb/maint.c:1183: undefined reference to \ `selftests::for_each_selftest( gdb::function_view< void (std::__cxx11::basic_string, std::allocator > const&)>)' ... Fix this by guarding the call to selftests::for_each_selftest in maintenance_selftest_completer with GDB_SELF_TEST, such that the "-verbose" completion still works. Rebuild on x86_64-linux and ran gdb.gdb/unittest.exp. 2021-10-29 Enze Li Document "memory-tag-violations". * gdb/doc/gdb.texinfo: (Data): Document '-memory-tag-violations'. (Command Options): Update the example. 2021-10-29 Tejas Belagod Support for a new pacbti unwind opcode. This patch adds readelf support for decoding the exception table opcode for restoring the RA_AUTH_CODE pseudo register defined by the EHABI (https://github.com/ARM-software/abi-aa/releases/download/2021Q1/ehabi32.pdf Section 10.3). * readelf.c (decode_arm_unwind_bytecode): Add support to decode restoring RA_AUTH_CODE pseudo register. 2021-10-29 Alan Modra Re: arm: add unwinder encoding support for PACBTI Move the gas testsuite files to where they belong. 2021-10-29 Alan Modra ELF core file size checks Catch fuzzed segments where p_offset + p_filesz wraps, and limit error output. * elfcore.h (elf_core_file_p): Rewrite segment checks using bfd_get_file_size. Set read_only on file size errors. * elfcode.h (elf_swap_shdr_in): Don't repeat error message. 2021-10-29 Alan Modra obcopy vs. files with silly section alignment We already ignore stupid segment alignment when rewriting headers, ignore section alignment too. * elf.c (rewrite_elf_program_header): Ignore section alignment power greater than 62. 2021-10-29 GDB Administrator Automatic date update in version.in 2021-10-28 Stafford Horne gdb: Add OpenRISC gdbserver and native config news The previous patches added gdbserver and native debugging support for OpenRISC targets. This patch documents that in the news. gdb: or1k: add single step for linux native debugging Needed for single stepping in Linux, this adds the or1k implementation of or1k_software_single_step. Most of the implementation is borrowed from the bare metal single step code from or1k_single_step_through_delay which has been extracted and shared in helper function or1k_delay_slot_p. 2021-10-28 Stafford Horne gdb: or1k: add native linux support This patch adds support for running gdb natively on OpenRISC linux. Debugging support is provided via the linux PTRACE interface which is mostly handled by GDB genric code. This patch provides the logic of how to read and write the ptrace registers between linux and GDB. Single stepping is privided in a separate patch. 2021-10-28 Stafford Horne gdb: or1k: add generated linux descriptor file gdb: or1k: fixup linux regcache comment The old comment was not properly updated from the RISC-V example used. Update it to match OpenRISC. 2021-10-28 Stafford Horne gdb: or1k: implement gdb server This patch adds gdbserver support for OpenRISC. This has been used for debugging the glibc port that in being worked on here: https://github.com/openrisc/or1k-glibc/tree/or1k-port-2 Hence the comment about registers definitions being inline with glibc. 2021-10-28 Christian Biesinger [sim] Include defs.h in ppc/hw_memory.c To fix this error (seen on cygwin): /../../sim/ppc/../common ../../../sim/ppc/hw_memory.c In file included from ../../gnulib/import/stdlib.h:100, from ../../../sim/ppc/hw_memory.c:28: ../../gnulib/import/unistd.h:663:3: error: #error "Please include config.h first." 663 | #error "Please include config.h first." | ^~~~~ ../../gnulib/import/unistd.h:665:24: error: expected ';' before 'extern' 665 | _GL_INLINE_HEADER_BEGIN | ^ | ; ../../gnulib/import/unistd.h:2806:22: error: expected ';' before 'extern' 2806 | _GL_INLINE_HEADER_END | ^ | ; 2021-10-28 Markus Klein ARM assembler: Allow up to 32 single precision registers in the VPUSH and VPOP instructions. PR 28436 * config/tc-arm.c (do_vfp_nsyn_push_pop_check): New function. (do_vfp_nsyn_pop): Use the new function. (do_vfp_nsyn_push): Use the new function. * testsuite/gas/arm/v8_1m-mve.s: Add new instructions. * testsuite/gas/arm/v8_1m-mve.d: Updated expected disassembly. 2021-10-28 Simon Marchi gdb: use ptid_t::to_string in infrun debug messages In debug messages, I think it would be more helpful to print ptid using the simple "pid.lwp.tid" notation in infrun debug messages. I am currently debugging some fork issues, and find the pid_to_str output not so useful, as it doesn't tell which process a thread belongs to. It currently shows up like this: [infrun] resume_1: step=1, signal=GDB_SIGNAL_0, trap_expected=0, current thread [Thread 0x7ffff7d95740 (LWP 892942)] at 0x55555555521f With the patch, it shows up like this: [infrun] resume_1: step=1, signal=GDB_SIGNAL_0, trap_expected=1, current thread [894072.894077.0] at 0x5555555551d9 Change-Id: I130796d7dfb0d8e763b8358d8a6002701d80c4ea 2021-10-28 Simon Marchi gdb: add selftest name completion After the previous commit, it is easy to add completion for selftest names. Again, this is not particularly high value, but I rarely touched completion, so it served as a simple example to get some practice. Change the for_each_selftest_ftype parameter to gdb::function_view, so that we can pass a lambda that captures things. Change-Id: I87cac299ddca9ca7eb0ffab78342e850a98d954c 2021-10-28 Tejas Belagod arm: add unwinder encoding support for PACBTI This patch adds support for encoding the Return Address Authentication pseudo register - '.save {ra_auth_code}' as defined by the DWARF ABI - in the exception tables where the opcode is defined by the EHABI gas/Changelog: * config/tc-arm.c (arm_reg_type): Add new type REG_TYPE_PSEUDO. (reg_expected_msgs): Add message for pseudo reg type. (reg_list_els): Add new reg list type REGLIST_PSEUDO. (parse_reg_list): Handle new REGLIST_PSEUDO type. (s_arm_unwind_save_pseudo): Encode pseudo reg list save in exception tables. (s_arm_unwind_save): Handle new REG_TYPE_PSEUDO. (reg_names): Add ra_auth_code pseudo register. * testsuite/gas/arm/unwind-pacbti-m.s: New test. * testsuite/gas/arm/unwind-pacbti-m.d: New test. * testsuite/gas/arm/unwind-pacbti-m-readelf.d: New test. 2021-10-28 Simon Marchi gdb: add "maint set/show selftest verbose" commands and use process_options I saw the new -verbose switch to "maint selftests" and thought it would be nice for it to use the option framework. For example, that makes having completion easy. It's not that high value, given this is a maintenance command, but I had never used the framework myself, so it was a good way to practice. This patch also adds the "maint set/show selftest verbose" setting. It would be possible to use option framework without adding the setting, but using the framework makes adding the option almost trivial, so I thought why not. Change-Id: I6687faa0713ff3da60b398253211777100094144 2021-10-28 Tom de Vries [gdb/testsuite] Update some test-cases to GPLv3 I noticed some files in the test-suite have GPLv2 notices. Update these to GPLv3. 2021-10-28 Simon Marchi gdb: add add_setshow_prefix_cmd There's a common pattern to call add_basic_prefix_cmd and add_show_prefix_cmd to add matching set and show commands. Add the add_setshow_prefix_cmd function to factor that out and use it at a few places. Change-Id: I6e9e90a30e9efb7b255bf839cac27b85d7069cfd 2021-10-28 Tom de Vries [gdb/testsuite] Require python in gdb.server/server-kill-python.exp I came across this when running test-case gdb.server/server-kill-python.exp with a gdb configured without python: ... builtin_spawn gdb -nw -nx -data-directory data-directory -iex set height 0 \ -iex set width 0 -quiet -iex set height 0 -iex set width 0 \ -ex source outputs/gdb.server/server-kill-python/file1.py^M FAIL: gdb.server/server-kill-python.exp: ensure inferior is running Executing on target: kill -9 28535 (timeout = 300) builtin_spawn -ignore SIGHUP kill -9 28535^M file1.py:1: Error in sourced command file:^M Undefined command: "import". Try "help".^M ... Fix this by testing for python support in the test-case. Tested on aarch64-linux (with python support disabled) and x86_64-linux (with python support enabled). 2021-10-28 Tom de Vries [gdb/testsuite] Fix assembly comments in gdb.dwarf2/clang-debug-names.exp.tcl On openSUSE Leap 15.2 aarch64 I ran into: ... clang-debug-names-debug.S:72: \ Error: junk at end of line, first unrecognized character is `#' ... due to: ... 71 .Ldebug_names_start: 72 .short 5 # Header: version ... Fix this by using the /* ... */ comment style instead: ... $ sed -i 's% #\([^"]*\)%/*\1 */%' clang-debug-names.exp.tcl ... Tested on aarch64-linux and x86_64-linux. 2021-10-28 Tom de Vries [gdb/symtab] Handle DW_AT_string_length with location list Consider a fortran routine where a string variable s is modified: ... subroutine f(s) character*(*) s print *, s s(1:3) = 'oof' print *, s end subroutine f ... When compiling with optimization level -O1 and printing the type of variable s we get: ... $ gdb -q -batch outputs/gdb.opt/fortran-string/fortran-string \ -ex "b f" \ -ex run \ -ex "ptype s" Breakpoint 1 at 0x4006f7: file fortran-string.f90, line 21. Breakpoint 1, f (s=..., _s=_s@entry=3) at fortran-string.f90:21 21 subroutine f(s) type = character*1 ... while with -O0 we have instead: ... type = character (3) ... The problem is that the type of s is: ... <1><2d6>: Abbrev Number: 21 (DW_TAG_string_type) <2d7> DW_AT_string_length: 0xbf (location list) <2db> DW_AT_byte_size : 4 ... where the DW_AT_string_length is a location list, a case that is not handled by attr_to_dynamic_prop. Fix this by handling attr->form_is_section_offset () in attr_to_dynamic_prop. Tested on x86_64-linux. The test-case is based on gdb.opt/fortran-string.exp from https://src.fedoraproject.org/rpms/gdb/raw/f32/f/gdb-archer-vla-tests.patch . I've updated the copyrights to stretch to 2021. [ I've tried to create a dwarf assembly test-case for this, but didn't manage. ] Co-Authored-By: Jan Kratochvil Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26910 2021-10-28 Kavitha Natarajan [gdb/testsuite] Initialize anonymous union in gdb.cp/koenig.cc GDB test fails while running the test case gdb.cp/koenig.exp using clang compiler: [...] p foo (p_union) No symbol "p_union" in current context. (gdb) FAIL: gdb.cp/koenig.exp: p foo (p_union) [...] In the testcase, "p_union" is an unused/uninitialized variable of anonymous union type. Clang does not emit symbol for unused anonymous union/struct variables at any optimization level. Since the compiler itself is not emitting the symbol for "p_union", debug info is also not emitted when built with debug option. If the anonymous union is initialized (or used), then clang emits the symbol "p_union" which enables emitting debug info for "p_union". [...] p foo (p_union) Cannot resolve function foo to any overloaded instance (gdb) PASS: gdb.cp/koenig.exp: p foo (p_union) [...] 2021-10-28 Alan Modra asan: mmo: NULL dereferenc in mmo_xore_32 mmo_get_loc can return NULL. It's commented even, and that the caller then must handle a split field. mmo_xore_* don't handle split fields, instead just segfault. Stop that happening, and refuse to recognise fuzzed mmo files that trigger this problem. * mmo.c (mmo_get_loc): Don't declare inline. (mmo_xore_64, mmo_xore_32, mmo_xore_16): Remove forward decls. Return pointer, don't dereference NULL. (mmo_scan): Return error on mmo_get_loc returning NULL. 2021-10-28 Alan Modra bfd: remove use of INLINE No need to use anything fancy, plain inline works just as well. * bfd-in.h (INLINE): Don't define. * bfd-in2.h: Regenerate. * aoutx.h: Replace use of INLINE with inline. * elf-eh-frame.c: Likewise. * elf32-score7.c: Likewise. * elfxx-mips.c: Likewise. * ihex.c: Likewise. * mach-o.c: Likewise. * mmo.c: Likewise. 2021-10-28 Alan Modra ASSERT in empty output section with address * ldlang.c (lang_do_assignments_1): Correct "dot" inside ignored sections. * testsuite/ld-scripts/empty-address-4.d, * testsuite/ld-scripts/empty-address-4.s, * testsuite/ld-scripts/empty-address-4.t: New test. * testsuite/ld-scripts/empty-address.exp: Run it. 2021-10-28 GDB Administrator Automatic date update in version.in 2021-10-27 Alan Modra asan: alpha-vms: buffer overflows Yet more anti-fuzzer sanity checking * vms-alpha.c (evax_bfd_print_egsd): Sanity check record and name lengths before access. (evax_bfd_print_etir_stc_ir, evax_bfd_print_etir): Likewise. 2021-10-27 Alan Modra ubsan: arm: undefined shift left shift of 2 by 31 places cannot be represented in type 'int' * arm-dis.c (print_insn_thumb16): Avoid undefined behaviour. 2021-10-27 Tom Tromey Fix watchpoints with multiple threads on Windows A recent internal change pointed out that watchpoints were not working on Windows when the inferior was multi-threaded. This happened because the debug registers were only updated for certain threads -- in particular, those that were being resumed and that were not marked as suspended. In the case of single-stepping, the need to update the debug registers in other threads could also be "forgotten". This patch changes windows-nat.c to mark all threads needing a debug register update. This brings the code closer to what gdbserver does (though, unfortunately, it still seems more complicated than needed). 2021-10-27 Tom de Vries [gdb/testsuite] Fix port detection in gdb.debuginfod/fetch_src_and_symbols.exp On OBS I ran into this failure with test-case gdb.debuginfod/fetch_src_and_symbols.exp: ... Failed to listen for connections: Address already in use^M [Thu Oct 21 11:48:49 2021] (559/559): started http server on IPv6 port=8000^M ... FAIL: gdb.debuginfod/fetch_src_and_symbols.exp: local_url: find port timeout ... The test-case is trying to start debuginfod on a port to see if it's available, and it handles either this message: "started http server on IPv4 IPv6 port=$port" meaning success, or: "failed to bind to port" meaning failure, in which case the debuginfod instance is killed, and we try the next port. The test-case only uses the v4 address 127.0.0.1, so fix this by: - accepting "started http server on IPv4 port=$port" - rejecting "started http server on IPv6 port=$port" Tested on x86_64-linux. 2021-10-27 Simon Marchi gdb: fix value.c build on 32-bits When building on ARM (32-bits), we errors like this: /home/smarchi/src/binutils-gdb/gdb/value.c: In function 'gdb::array_view value_contents_for_printing(value*)': /home/smarchi/src/binutils-gdb/gdb/value.c:1252:35: error: narrowing conversion of 'length' from 'ULONGEST' {aka 'long long unsigned int'} to 'size_t' {aka 'unsigned int'} [-Werror=narrowing] 1252 | return {value->contents.get (), length}; | ^~~~~~ Fix that by using gdb::make_array_view, which does the appropriate conversion. Change-Id: I7d6f2e75d7440d248b8fb18f8272ee92954b404d 2021-10-27 Nelson Chu RISC-V: Tidy riscv assembler and disassembler. Tidy the gas/config/tc-riscv.c and opcodes/riscv-dis.c, to prepare for moving the released extensions (including released vendor extensions) from integration branch back to mainline. * Added parts of missing comments. * Updated md_show_usage. * For validate_riscv_insn, riscv_ip and print_insn_args, unify the following pointer names, - oparg: pointed to the parsed operand defined in the riscv_opcodes. - asarg: pointed to the parsed operand from assembly. - opargStart: recorded the parsed operand name from riscv_opcodes. - asargStart: recorded the parsed operand name from assembly. gas/ * config/tc-riscv.c: Added parts of missind comments and updated the md_show_usage. (riscv_multi_subset_supports): Tidy codes. (validate_riscv_insn): Unify the pointer names, oparg, asarg, opargStart and asargStart, to prepare for moving the released extensions from integration branch back to mainline. (riscv_ip): Likewise. (macro_build): Added fmtStart, also used to prepare for moving released extensions. (md_show_usage): Added missing descriptions for new options. opcodes/ * riscv-dis.c (print_insn_args): Unify the pointer names, oparg and opargStart, to prepare for moving the released extensions from integration branch back to mainline. 2021-10-27 Maciej W. Rozycki opcodes: Fix RPATH not being set for dynamic libbfd dependency If built as a shared library, libopcodes has a load-time dependency on libbfd, which is recorded in the dynamic section, however without a corresponding RPATH entry for the directory to find libbfd in. This causes loading to fail whenever libbfd is only pulled by libopcodes indirectly and libbfd has been installed in a directory that is not in the dynamic loader's search path. It does not happen with the programs included with binutils or GDB, because they all also pull libbfd when using libopcodes, but it can happen with external software, e.g.: $ gdbserver --help gdbserver: error while loading shared libraries: libbfd-[...].so: cannot open shared object file: No such file or directory $ (not our `gdbserver'). Indirect dynamic dependencies are handled by libtool automatically by adding RPATH entries as required, however our setup for libopcodes prevents this from happening by linking in libbfd with an explicit file reference sneaked through to the linker directly behind libtool's back via the `-Wl' linker command-line option rather than via `-l' combined with a suitable library search path specified via `-L', as it would be usually the case, or just referring to the relevant .la file in a fully libtool-enabled configuration such as ours. According to an observation in the discussion back in 2007[1][2][3] that has led to the current arrangement it is to prevent libtool from picking up the wrong version of libbfd. It does not appear to be needed though, not at least with our current libtool incarnation, as directly referring `libbfd.la' does exactly what it should, as previously suggested[4], and with no link-time reference to the installation directory other than to set RPATH. Uninstalled version of libopcodes has libbfd's build-time location prepended to RPATH too, as also expected. Use a direct reference to `libbfd.la' then, making the load error quoted above go away. Alternatively `-L' and `-l' could be used to the same effect, but it seems an unnecessary complication and just another way to circumvent rather than making use of libtool. References: [1] "compile failure due to undefined symbol", [2] same, [3] same, [4] same, opcodes/ * Makefile.am: Remove obsolete comment. * configure.ac: Refer `libbfd.la' to link shared BFD library except for Cygwin. * Makefile.in: Regenerate. * configure: Regenerate. 2021-10-27 GDB Administrator Automatic date update in version.in 2021-10-27 H.J. Lu gold: Place .note.gnu.property section before other note sections Place the .note.gnu.property section before all other note sections to avoid being placed between other note sections with different alignments. PR gold/28494 * layout.cc (Layout::create_note): Set order to ORDER_PROPERTY_NOTE for the .note.gnu.property section. * layout.h (Output_section_order): Add ORDER_PROPERTY_NOTE. 2021-10-26 Tom de Vries [gdb/doc] Fix print inferior-events default In the docs about print inferior-events we read: ... By default, these messages will not be printed. ... That used to be the case, but is no longer so since commit f67c0c91715 "Enable 'set print inferior-events' and improve detach/fork/kill/exit messages". Fix this by updating the docs. 2021-10-26 GDB Administrator Automatic date update in version.in 2021-10-25 Simon Marchi gdb: change functions returning value contents to use gdb::array_view The bug fixed by this [1] patch was caused by an out-of-bounds access to a value's content. The code gets the value's content (just a pointer) and then indexes it with a non-sensical index. This made me think of changing functions that return value contents to return array_views instead of a plain pointer. This has the advantage that when GDB is built with _GLIBCXX_DEBUG, accesses to the array_view are checked, making bugs more apparent / easier to find. This patch changes the return types of these functions, and updates callers to call .data() on the result, meaning it's not changing anything in practice. Additional work will be needed (which can be done little by little) to make callers propagate the use of array_view and reap the benefits. [1] https://sourceware.org/pipermail/gdb-patches/2021-September/182306.html Change-Id: I5151f888f169e1c36abe2cbc57620110673816f3 2021-10-25 Simon Marchi gdbsupport: add assertions in array_view Add assertions to ensure we don't access an array_view out of bounds. Enable these assertions only when _GLIBCXX_DEBUG is set, as we did for gdb::optional. Change-Id: Iffaee38252405073735ed123c8e57fde6b2c6be3 2021-10-25 Simon Marchi gdbserver: make target_pid_to_str return std::string I wanted to write a warning that included two target_pid_to_str calls, like this: warning (_("Blabla %s, blabla %s"), target_pid_to_str (ptid1), target_pid_to_str (ptid2)); This doesn't work, because target_pid_to_str stores its result in a static buffer, so my message would show twice the same ptid. Change target_pid_to_str to return an std::string to avoid this. I don't think we save much by using a static buffer, but it is more error-prone. Change-Id: Ie3f649627686b84930529cc5c7c691ccf5d36dc2 2021-10-25 H.J. Lu x86: Also handle stores for -muse-unaligned-vector-move * config/tc-i386.c (encode_with_unaligned_vector_move): Also handle stores. * testsuite/gas/i386/unaligned-vector-move.s: Add stores. * testsuite/gas/i386/unaligned-vector-move.d: Updated. * testsuite/gas/i386/x86-64-unaligned-vector-move.d: Likewise. 2021-10-25 Tom de Vries [gdb/testsuite] Fix duplicate in gdb.mi/mi-var-cp.exp With test-case gdb.mi/mi-var-cp.exp I run into this duplicate: ... PASS: gdb.mi/mi-var-cp.exp: run to mi-var-cp.cc:104 (set breakpoint) PASS: gdb.mi/mi-var-cp.exp: create varobj for s PASS: gdb.mi/mi-var-cp.exp: create varobj for s DUPLICATE: gdb.mi/mi-var-cp.exp: create varobj for s ... This is due to a duplicate test name here: ... $ cat -n gdb/testsuite/gdb.mi/mi-var-cp.cc ... 100 int reference_to_struct () 101 { 102 /*: BEGIN: reference_to_struct :*/ 103 S s = {7, 8}; 104 S& r = s; 105 /*: 106 mi_create_varobj S s "create varobj for s" 107 mi_create_varobj R r "create varobj for s" ... Fix this by using "create varobj for r" instead. Tested on x86_64-linux. 2021-10-25 Nick Alcock libctf, ld: handle nonrepresentable types better ctf_type_visit (used, among other things, by the type dumping code) was aborting when it saw a nonrepresentable type anywhere: even a single structure member with a nonrepresentable type caused an abort with ECTF_NONREPRESENTABLE. This is not useful behaviour, given that the abort comes from a type-resolution we are only doing in order to determine whether the type is a structure or union. We know nonrepresentable types can't be either, so handle that case and pass the nonrepresentable type down. (The added test verifies that the dumper now handles this case and prints nonrepresentable structure members as it already does nonrepresentable top-level types, rather than skipping the whole structure -- or, without the previous commit, skipping the whole types section.) ld/ChangeLog 2021-10-25 Nick Alcock * testsuite/ld-ctf/nonrepresentable-member.*: New test. libctf/ChangeLog 2021-10-25 Nick Alcock * ctf-types.c (ctf_type_rvisit): Handle nonrepresentable types. 2021-10-25 Nick Alcock libctf: dump: do not stop dumping types on error If dumping of a single type fails, we obviously can't dump it; but just as obviously this doesn't make the other types in the types section invalid or undumpable. So we should not propagate errors seen when type-dumping, but rather ignore them and carry on, so we dump as many types as we can (leaving out the ones we can't grok). libctf/ChangeLog 2021-10-25 Nick Alcock * ctf-dump.c (ctf_dump_type): Do not abort on error. 2021-10-25 Nick Alcock binutils, ld: make objdump --ctf's parameter optional ld by default (and always, unless adjusted with a hand-rolled linker script) emits deduplicated CTF into the .ctf section. But viewing it needs you to explicitly tell objdump this: it doesn't default its argument, even though what you always end up typing is --ctf=.ctf. This is annoying, so make the argument optional. binutils/ChangeLog 2021-10-25 Nick Alcock * objdump.c (usage): --ctf now has an optional argument. (main): Adjust accordingly. (dump_ctf): Default it. * doc/ctf.options.texi: Adjust. ld/ChangeLog 2021-10-25 Nick Alcock * testsuite/ld-ctf/array.d: Change --ctf=.ctf to --ctf. * testsuite/ld-ctf/conflicting-cycle-1.B-1.d: Likewise. * testsuite/ld-ctf/conflicting-cycle-1.B-2.d: Likewise. * testsuite/ld-ctf/conflicting-cycle-1.parent.d: Likewise. * testsuite/ld-ctf/conflicting-cycle-2.A-1.d: Likewise. * testsuite/ld-ctf/conflicting-cycle-2.A-2.d: Likewise. * testsuite/ld-ctf/conflicting-cycle-2.parent.d: Likewise. * testsuite/ld-ctf/conflicting-cycle-3.C-1.d: Likewise. * testsuite/ld-ctf/conflicting-cycle-3.C-2.d: Likewise. * testsuite/ld-ctf/conflicting-cycle-3.parent.d: Likewise. * testsuite/ld-ctf/conflicting-enums.d: Likewise. * testsuite/ld-ctf/conflicting-typedefs.d: Likewise. * testsuite/ld-ctf/cross-tu-cyclic-conflicting.d: Likewise. * testsuite/ld-ctf/cross-tu-cyclic-nonconflicting.d: Likewise. * testsuite/ld-ctf/cross-tu-into-cycle.d: Likewise. * testsuite/ld-ctf/cross-tu-noncyclic.d: Likewise. * testsuite/ld-ctf/cycle-1.d: Likewise. * testsuite/ld-ctf/cycle-2.A.d: Likewise. * testsuite/ld-ctf/cycle-2.B.d: Likewise. * testsuite/ld-ctf/cycle-2.C.d: Likewise. * testsuite/ld-ctf/data-func-conflicted.d: Likewise. * testsuite/ld-ctf/diag-cttname-null.d: Likewise. * testsuite/ld-ctf/diag-cuname.d: Likewise. * testsuite/ld-ctf/diag-parlabel.d: Likewise. * testsuite/ld-ctf/enum-forward.d: Likewise. * testsuite/ld-ctf/enums.d: Likewise. * testsuite/ld-ctf/forward.d: Likewise. * testsuite/ld-ctf/function.d: Likewise. * testsuite/ld-ctf/nonrepresentable.d: Likewise. * testsuite/ld-ctf/slice.d: Likewise. * testsuite/ld-ctf/super-sub-cycles.d: Likewise. 2021-10-25 Nick Alcock binutils: make objdump/readelf --ctf-parent actually useful This option has been present since the very early days of the development of libctf as part of binutils, and it shows. Back in the earliest days, I thought we might handle ambiguous types by introducing new ELF sections on the fly named things like .ctf.foo.c for ambiguous types found only in foo.c, etc. This turned out to be a terrible idea, so we moved to using a CTF archive in the .ctf section which contained all the CTF dictionaries -- but the --ctf-parent option in objdump and readelf was never adjusted, and lingered as a mechanism to specify CTF parent dictionaries in sections other than .ctf, even though the linker has no way to produce parent dictionaries in different sections from their children, libctf's ctf_open can't handle such split-up parent/child dicts, and they are never found in the wild, emitted by GNU ld or by any known third-party linking tool. Meanwhile, the actually-useful ctf_link feature (albeit not used by ld) which lets you remap the names of CTF archive members (so you can end up with a parent archive member named something other than ".ctf", still contained with all its children in a single .ctf section) had no support in objdump or readelf: there was no way to tell them that these members were parents, so all the types in the associated child dicts always appeared corrupted, referencing nonexistent types from a parent objdump couldn't find. So adjust --ctf-parent so that rather than taking a section name it takes a member name instead (if not specified, the name is ".ctf", which is what GNU ld emits). Because the option was always useless before now, this is expected to have no backward-compatibility implications. As part of this, we have to slightly adjust the code which skips the archive member name if redundant: right now it skips it if it's ".ctf", on the assumption that this name will almost always be at the start of the objdump output and thus we'll end up with a shared dump and then smaller, headed dumps for the per-TU child dicts; but if the parent name has been changed, that won't be true any more. So change the rules to "members named .ctf which appear first in the first have their member name skipped". Since we now need to count members, move from ctf_archive_iter (for which passing in extra parameters requires defining a new struct and is clumsy) to ctf_archive_next, allowing us to just *call* dump_ctf_archive_member and maintain a member count in the obvious way. In the process we fix a tiny difference between readelf and objdump: if a ctf_dump ever failed, readelf skipped every later member, while objdump tried to keep going as much as it could. For a dumping tool the former is clearly preferable. binutils/ChangeLog 2021-10-25 Nick Alcock * objdump.c (usage): --ctf-parent now takes a name, not a section. (dump_ctf): Don't open a separate section; use the parent_name in ctf_dict_open instead. Use ctf_archive_next, not ctf_archive_iter, so we can pass down a member count. (dump_ctf_archive_member): Add the member count; don't return anything. Import parents into children no matter what the parent's name, while still avoiding displaying the header for the common parent name of ".ctf". * readelf.c (usage): Adjust similarly. (dump_section_as_ctf): Likewise. (dump_ctf_archive_member): Likewise. Never stop iterating over archive members, even if ctf_dump of one member fails. * doc/ctf.options.texi: Adjust. 2021-10-25 Alan Modra objdump doesn't accept -L option A followup to commit ca0e11aa4b. * objdump.c (main): Add 'L' to short options and sort them. 2021-10-25 Alan Modra bfd_nonfatal_message, localise va_start Nothing to see here, just a little tidier. * bucomm.c (bfd_nonfatal_message): Localise va_list args. 2021-10-25 Alan Modra ubsan: _bfd_xcoff64_swap_aux_in left shift of negative value * coff64-rs6000.c (_bfd_xcoff64_swap_aux_in): Use bfd_vma for h. asan: evax_bfd_print_image buffer overflow * vms-alpha.c (evax_bfd_print_image): Sanity check printing of "image activator fixup" section. (evax_bfd_print_relocation_records): Sanity check buffer offsets. (evax_bfd_print_address_fixups): Likewise. (evax_bfd_print_reference_fixups): Likewise. 2021-10-25 GDB Administrator Automatic date update in version.in 2021-10-24 Alan Modra asan: c4x, c54x coff_canonicalize_reloc buffer overflow Sometimes the investigation of a fuzzing bug report leads into areas you'd rather not go. In this instance by the time I'd figured out the real cause was a target variant that had never been properly supported in binutils, the time needed to fix it was less than the time needed to rip it out. * coffcode.h (coff_set_alignment_hook): Call bfd_coff_swap_reloc_in not coff_swap_reloc_in. (coff_slurp_reloc_table): Likewise. Don't use RELOC type. (ticoff0_swap_table): Use coff_swap_reloc_v0_out and coff_swap_reloc_v0_in. * coffswap.h (coff_swap_reloc_v0_in, coff_swap_reloc_v0_out): New. * coff-tic54x.c (tic54x_lookup_howto): Don't abort. * coffgen.c (coff_get_normalized_symtab): Use PTR_ADD. * bfd-in.h (PTR_ADD, NPTR_ADD): Avoid warnings when passing an expression. * bfd-in2.h: Regenerate. 2021-10-24 Alan Modra asan: arm-darwin: buffer overflow PR 21813 * mach-o-arm.c (bfd_mach_o_arm_canonicalize_one_reloc): Sanity check PAIR reloc in other branch of condition as was done for PR21813. Formatting. Delete debug printf. asan: aout: heap buffer overflow * aoutx.h (aout_get_external_symbols): Sanity check before writing zero index entry. Remove outdated comment. * pdp11.c (aout_get_external_symbols): Likewise. 2021-10-24 liuzhensong LoongArch ld support 2021-10-22 Chenghua Xu Zhensong Liu Weinan Liu Xiaolin Tang ld/ * Makefile.am: Add LoongArch. * NEWS: Mention LoongArch support. * configure.tgt: Add LoongArch. * emulparams/elf32loongarch-defs.sh: New. * emulparams/elf32loongarch.sh: Likewise. * emulparams/elf64loongarch-defs.sh: Likewise. * emulparams/elf64loongarch.sh: Likewise. * emultempl/loongarchelf.em: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate. ld/testsuite/ * ld-loongarch-elf/disas-jirl.d: New. * ld-loongarch-elf/disas-jirl.s: Likewise. * ld-loongarch-elf/jmp_op.d: Likewise. * ld-loongarch-elf/jmp_op.s: Likewise. * ld-loongarch-elf/ld-loongarch-elf.exp: Likewise. * ld-loongarch-elf/macro_op.d: Likewise. * ld-loongarch-elf/macro_op.s: Likewise. * ld-loongarch-elf/syscall-0.s: Likewise. * ld-loongarch-elf/syscall-1.s: Likewise. * ld-loongarch-elf/syscall.d: Likewise. * ld-srec/srec.exp: Add LoongArch. * ld-unique/pr21529.d: Likewise. 2021-10-24 liuzhensong LoongArch gas support 2021-10-22 Chenghua Xu Zhensong Liu Weinan Liu Xiaolin Tang gas/ * Makefile.am: Add LoongArch. * NEWS: Mention LoongArch support. * config/loongarch-lex-wrapper.c: New. * config/loongarch-lex.h: New. * config/loongarch-lex.l: New. * config/loongarch-parse.y: New. * config/tc-loongarch.c: New. * config/tc-loongarch.h: New. * configure.ac: Add LoongArch. * configure.tgt: Likewise. * doc/as.texi: Likewise. * doc/c-loongarch.texi: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. gas/testsuite/ * gas/all/gas.exp: Add LoongArch. * gas/elf/elf.exp: Likewise. * gas/loongarch/4opt_op.d: New. * gas/loongarch/4opt_op.s: Likewise. * gas/loongarch/fix_op.d: Likewise. * gas/loongarch/fix_op.s: Likewise. * gas/loongarch/float_op.d: Likewise. * gas/loongarch/float_op.s: Likewise. * gas/loongarch/imm_op.d: Likewise. * gas/loongarch/imm_op.s: Likewise. * gas/loongarch/jmp_op.d: Likewise. * gas/loongarch/jmp_op.s: Likewise. * gas/loongarch/load_store_op.d: Likewise. * gas/loongarch/load_store_op.s: Likewise. * gas/loongarch/loongarch.exp: Likewise. * gas/loongarch/macro_op.d: Likewise. * gas/loongarch/macro_op.s: Likewise. * gas/loongarch/nop.d: Likewise. * gas/loongarch/nop.s: Likewise. * gas/loongarch/privilege_op.d: Likewise. * gas/loongarch/privilege_op.s: Likewise. * gas/loongarch/syscall.d: Likewise. * gas/loongarch/syscall.s: Likewise. * lib/gas-defs.exp: Add LoongArch. 2021-10-24 liuzhensong LoongArch binutils support 2021-10-22 Chenghua Xu Zhensong Liu Weinan Liu binutils/ * NEWS: Mention LoongArch support. * readelf.c: Add LoongArch. * testsuite/binutils-all/objdump.exp: Add LoongArch. 2021-10-24 liuzhensong LoongArch opcodes support 2021-10-22 Chenghua Xu Zhensong Liu Weinan Liu include/ * opcode/loongarch.h: New. * dis-asm.h: Declare print_loongarch_disassembler_options. opcodes/ * Makefile.am: Add LoongArch. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Declare print_insn_loongarch. * loongarch-coder.c: New. * loongarch-dis.c: New. * loongarch-opc.c: New. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. 2021-10-24 liuzhensong LoongArch bfd support 2021-10-22 Chenghua Xu Zhensong Liu Weinan Liu bfd/ * Makefile.am: Add LoongArch. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-loongarch.c: New. * elf-bfd.h: Add LoongArch. * elf.c: Add LoongArch elfcore_grok_xxx. * elfnn-loongarch.c: New. * elfxx-loongarch.c: New. * elfxx-loongarch.h: New. * reloc.c: Add LoongArch BFD RELOC ENUM. * targets.c: Add LoongArch target. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/BLD-POTFILES.in: Regenerate. * po/SRC-POTFILES.in: Regenerate. include/ * elf/common.h: Add NT_LARCH_{CPUCFG,CSR,LSX,LASX}. * elf/loongarch.h: New. 2021-10-24 GDB Administrator Automatic date update in version.in 2021-10-23 GDB Administrator Automatic date update in version.in 2021-10-22 H.J. Lu x86: Add -muse-unaligned-vector-move to assembler Unaligned load/store instructions on aligned memory or register are as fast as aligned load/store instructions on modern Intel processors. Add a command-line option, -muse-unaligned-vector-move, to x86 assembler to encode encode aligned vector load/store instructions as unaligned vector load/store instructions. * NEWS: Mention -muse-unaligned-vector-move. * config/tc-i386.c (use_unaligned_vector_move): New. (encode_with_unaligned_vector_move): Likewise. (md_assemble): Call encode_with_unaligned_vector_move for -muse-unaligned-vector-move. (OPTION_MUSE_UNALIGNED_VECTOR_MOVE): New. (md_longopts): Add -muse-unaligned-vector-move. (md_parse_option): Handle -muse-unaligned-vector-move. (md_show_usage): Add -muse-unaligned-vector-move. * doc/c-i386.texi: Document -muse-unaligned-vector-move. * testsuite/gas/i386/i386.exp: Run unaligned-vector-move and x86-64-unaligned-vector-move. * testsuite/gas/i386/unaligned-vector-move.d: New file. * testsuite/gas/i386/unaligned-vector-move.s: Likewise. * testsuite/gas/i386/x86-64-unaligned-vector-move.d: Likewise. 2021-10-22 Tom Tromey Fix 'uninstall' target This adds some missing code to the 'uninstall' targets in gdb and gdbserver. It also changes gdb's uninstall target so that it no longer tries to remove any man page -- this is already done (and more correctly) by doc/Makefile.in. I tested this with 'make install' followed by 'make uninstall', then examining the install tree for regular files. Only the 'dir' file remains, but this appears to just be how 'install-info' is intended to work. 2021-10-22 Tom Tromey Remove unused variables from gdbserver's Makefile This removes a number of unused variables from gdbserver's Makefile. I found these while working on the subsequent patches, and figured it would be cleaner to have a separate patch for the deletions. 2021-10-22 Tom de Vries [gdb/testsuite] Fix gdb.threads/linux-dp.exp On openSUSE Tumbleweed with glibc-debuginfo installed I get: ... (gdb) PASS: gdb.threads/linux-dp.exp: continue to breakpoint: thread 5's print where^M #0 print_philosopher (n=3, left=33 '!', right=33 '!') at linux-dp.c:105^M #1 0x0000000000401628 in philosopher (data=0x40537c) at linux-dp.c:148^M #2 0x00007ffff7d56b37 in start_thread (arg=) \ at pthread_create.c:435^M #3 0x00007ffff7ddb640 in clone3 () \ at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81^M (gdb) PASS: gdb.threads/linux-dp.exp: first thread-specific breakpoint hit ... while without debuginfo installed I get instead: ... (gdb) PASS: gdb.threads/linux-dp.exp: continue to breakpoint: thread 5's print where^M #0 print_philosopher (n=3, left=33 '!', right=33 '!') at linux-dp.c:105^M #1 0x0000000000401628 in philosopher (data=0x40537c) at linux-dp.c:148^M #2 0x00007ffff7d56b37 in start_thread () from /lib64/libc.so.6^M #3 0x00007ffff7ddb640 in clone3 () from /lib64/libc.so.6^M (gdb) FAIL: gdb.threads/linux-dp.exp: first thread-specific breakpoint hit ... The problem is that the regexp used: ... "\(from .*libpthread\|at pthread_create\|in pthread_create\)" ... expects the 'from' part to match libpthread, but in glibc 2.34 libpthread has been merged into libc. Fix this by updating the regexp. Tested on x86_64-linux. 2021-10-22 Tom de Vries [gdb/testsuite] Fix FAILs in gdb.mi/mi-breakpoint-changed.exp Since commit e36788d1354 "[gdb/testsuite] Fix handling of nr_args < 3 in mi_gdb_test" we run into: ... PASS: gdb.mi/mi-breakpoint-changed.exp: test_auto_disable: mi runto main Expecting: ^(-break-insert -f pendfunc1[^M ]+)?((&.*)*.*~"Breakpoint 2 at.*\\n".*=breakpoint-created,\ bkpt=\{number="2",type="breakpoint".*\}.*\n\^done[^M ]+[(]gdb[)] ^M [ ]*) -break-insert -f pendfunc1^M ^done,bkpt={number="2",type="breakpoint",disp="keep",enabled="y",\ addr="0x00007ffff7bd559e",func="pendfunc1",\ file="gdb/testsuite/gdb.mi/pendshr1.c",\ fullname="gdb/testsuite/gdb.mi/pendshr1.c",line="21",thread-groups=["i1"],\ times="0",original-location="pendfunc1"}^M (gdb) ^M FAIL: gdb.mi/mi-breakpoint-changed.exp: test_auto_disable: \ -break-insert -f pendfunc1 (unexpected output) ... The regexp expects a breakpoint-created event, but that's actually suppressed by the command: ... DEF_MI_CMD_MI_1 ("break-insert", mi_cmd_break_insert, &mi_suppress_notification.breakpoint), ... Fix this by updating the regexp. Likewise for the following: ... PASS: gdb.mi/mi-breakpoint-changed.exp: test_auto_disable: \ -break-insert -f pendfunc1 Expecting: ^(-break-enable count 1 2[^M ]+)?(=breakpoint-modified,\ bkpt=\{number="2",type="breakpoint",disp="dis",enabled="y".*\}.*\n\^done[^M ]+[(]gdb[)] ^M [ ]*) -break-enable count 1 2^M ^done^M (gdb) ^M FAIL: gdb.mi/mi-breakpoint-changed.exp: test_auto_disable: \ -break-enable count 1 2 (unexpected out\ put) ... Tested on x86_64-linux. 2021-10-22 Andrew Burgess gdb/python: move gdb.Membuf support into a new file In a future commit I'm going to be creating gdb.Membuf objects from a new file within gdb/python/py*.c. Currently all gdb.Membuf objects are created directly within infpy_read_memory (as a result of calling gdb.Inferior.read_memory()). Initially I split out the Membuf creation code into a new function, and left the new function in gdb/python/py-inferior.c, however, it felt a little random that the Membuf creation code should live with the inferior handling code. So, then I moved all of the Membuf related code out into a new file, gdb/python/py-membuf.c, the interface is gdbpy_buffer_to_membuf, which wraps an array of bytes into a gdb.Membuf object. Most of the code is moved directly from py-inferior.c with only minor tweaks to layout and replacing NULL with nullptr, hence, I've left the copyright date on py-membuf.c as 2009-2021 to match py-inferior.c. Currently, the only user of this code is still py-inferior.c, but in later commits this will change. There should be no user visible changes after this commit. 2021-10-22 Andrew Burgess gdb/python: new gdb.architecture_names function Add a new function to the Python API, gdb.architecture_names(). This function returns a list containing all of the supported architecture names within the current build of GDB. The values returned in this list are all of the possible values that can be returned from gdb.Architecture.name(). 2021-10-22 Andrew Burgess gdb: make disassembler fprintf callback a static member function The disassemble_info structure has four callbacks, we have three of them as static member functions within gdb_disassembler, the fourth is just a global static function. However, this fourth callback, is still only used from the disassemble_info struct, so there's no real reason for its special handling. This commit makes fprintf_disasm a static method within gdb_disassembler. There should be no user visible changes after this commit. 2021-10-22 Lewis Revill RISC-V: Added ld testcase for pcgp relaxation. Consider the the pcgp-relax-02 testcase, .text .globl _start _start: .L1: auipc a0, %pcrel_hi(data_a) .L2: auipc a1, %pcrel_hi(data_b) addi a0, a0, %pcrel_lo(.L1) addi a1, a1, %pcrel_lo(.L2) .data .word 0x0 .globl data_a data_a: .word 0x1 .section .rodata .globl data_b data_b: .word 0x2 If the first auipc is deleted, but we are still building the pcgp table (connect the high and low pcrel relocations), then there is an aliasing issue that we need some way to disambiguate which of the two symbols we are targeting. Therefore, Palmer thought of a way to use R_RISCV_DELETE to split this into two phases, so we could resolve the addresses before creating the ambiguities. This patch just add the ld testcase for the above case, in case we have changed something but break this. ld/ * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Renamed pcgp-relax to pcgp-relax-01, and added pcgp-relax-02. * testsuite/ld-riscv-elf/pcgp-relax-01.d: Renmaed from pcgp-relax. * testsuite/ld-riscv-elf/pcgp-relax-01.s: Likewise. * testsuite/ld-riscv-elf/pcgp-relax-02.d: New testcase. * testsuite/ld-riscv-elf/pcgp-relax-02.s: Likewise. 2021-10-22 Lewis Revill RISC-V: Don't separate pcgp relaxation to another relax pass. Commit abd20cb637008da9d32018b4b03973e119388a0a and ebdcad3fddf6ec21f6d4dcc702379a12718cf0c4 introduced additional complexity into the paths run by the RISC-V relaxation pass in order to resolve the issue of accurately keeping track of pcrel_hi and pcrel_lo pairs. The first commit split up relaxation of these relocs into a pass which occurred after other relaxations in order to prevent the situation where bytes were deleted in between a pcrel_lo/pcrel_hi pair, inhibiting our ability to find the corresponding pcrel_hi relocation from the address attached to the pcrel_lo. Since the relaxation was split into two passes the 'again' parameter could not be used to perform the entire relaxation process again and so the second commit added a way to restart ldelf_map_segments, thus starting the whole process again. Unfortunately this process could not account for the fact that we were not finished with the relaxation process so in some cases - such as the case where code would not fit in a memory region before the R_RISCV_ALIGN relocation was relaxed - sanity checks in generic code would fail. This patch fixes all three of these concerns by reverting back to a system of having only one target relax pass but updating entries in the table of pcrel_hi/pcrel_lo relocs every time any bytes are deleted. Thus we can keep track of the pairs accurately, and we can use the 'again' parameter to restart the entire target relax pass, behaving in the way that generic code expects. Unfortunately we must still have an additional pass to delay deleting AUIPC bytes to avoid ambiguity between pcrel_hi relocs stored in the table after deletion. This pass can only be run once so we may potentially miss out on relaxation opportunities but this is likely to be rare. https://sourceware.org/bugzilla/show_bug.cgi?id=28410 bfd/ * elfnn-riscv.c (riscv_elf_link_hash_table): Removed restart_relax. (riscv_elf_link_hash_table_create): Updated. (riscv_relax_delete_bytes): Moved after the riscv_update_pcgp_relocs. Update the pcgp_relocs table whenever bytes are deleted. (riscv_update_pcgp_relocs): Add function to update the section offset of pcrel_hi and pcrel_lo, and also update the symbol value of pcrel_hi. (_bfd_riscv_relax_call): Need to update the pcgp_relocs table when deleting codes. (_bfd_riscv_relax_lui): Likewise. (_bfd_riscv_relax_tls_le): Likewise. (_bfd_riscv_relax_align): Once we've handled an R_RISCV_ALIGN, we can't relax anything else, so set the sec->sec_flg0 to true. Besides, we don't need to update the pcgp_relocs table at this stage, so just pass NULL pointer as the pcgp_relocs table for riscv_relax_delete_bytes. (_bfd_riscv_relax_section): Use only one pass for all target relaxations. (_bfd_riscv_relax_delete): Likewise, we don't need to update the pcgp_relocs table at this stage, and don't need to set the `again' since restart_relax mechanism is abandoned. (bfd_elfNN_riscv_restart_relax_sections): Removed. (_bfd_riscv_relax_section): Updated. * elfxx-riscv.h (bfd_elf32_riscv_restart_relax_sections): Removed. (bfd_elf64_riscv_restart_relax_sections): Likewise. ld/ * emultempl/riscvelf.em: Revert restart_relax changes and set relax_pass to 3. * testsuite/ld-riscv-elf/align-small-region.d: New testcase. * testsuite/ld-riscv-elf/align-small-region.ld: Likewise. * testsuite/ld-riscv-elf/align-small-region.s: Likewise. * testsuite/ld-riscv-elf/restart-relax.d: Removed sine the restart_relax mechanism is abandoned. * testsuite/ld-riscv-elf/restart-relax.s: Likewise. * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated. 2021-10-22 Simon Marchi gdb: fix remote-sim.c build Commit 183be222907a ("gdb, gdbserver: make target_waitstatus safe") broke the remote-sim.c build. In fact, it does some wrong changes, result of a bad sed invocation. Fix it by adjusting the code to the new target_waitstatus API. Change-Id: I3236ff7ef7681fc29215f68be210ff4263760e91 2021-10-22 GDB Administrator Automatic date update in version.in 2021-10-21 Simon Marchi gdb, gdbserver: make target_waitstatus safe I stumbled on a bug caused by the fact that a code path read target_waitstatus::value::sig (expecting it to contain a gdb_signal value) while target_waitstatus::kind was TARGET_WAITKIND_FORKED. This meant that the active union field was in fact target_waitstatus::value::related_pid, and contained a ptid. The read signal value was therefore garbage, and that caused GDB to crash soon after. Or, since that GDB was built with ubsan, this nice error message: /home/simark/src/binutils-gdb/gdb/linux-nat.c:1271:12: runtime error: load of value 2686365, which is not a valid value for type 'gdb_signal' Despite being a large-ish change, I think it would be nice to make target_waitstatus safe against that kind of bug. As already done elsewhere (e.g. dynamic_prop), validate that the type of value read from the union matches what is supposed to be the active field. - Make the kind and value of target_waitstatus private. - Make the kind initialized to TARGET_WAITKIND_IGNORE on target_waitstatus construction. This is what most users appear to do explicitly. - Add setters, one for each kind. Each setter takes as a parameter the data associated to that kind, if any. This makes it impossible to forget to attach the associated data. - Add getters, one for each associated data type. Each getter validates that the data type fetched by the user matches the wait status kind. - Change "integer" to "exit_status", "related_pid" to "child_ptid", just because that's more precise terminology. - Fix all users. That last point is semi-mechanical. There are a lot of obvious changes, but some less obvious ones. For example, it's not possible to set the kind at some point and the associated data later, as some users did. But in any case, the intent of the code should not change in this patch. This was tested on x86-64 Linux (unix, native-gdbserver and native-extended-gdbserver boards). It was built-tested on x86-64 FreeBSD, NetBSD, MinGW and macOS. The rest of the changes to native files was done as a best effort. If I forgot any place to update in these files, it should be easy to fix (unless the change happens to reveal an actual bug). Change-Id: I0ae967df1ff6e28de78abbe3ac9b4b2ff4ad03b7 2021-10-21 Simon Marchi gdbserver: initialize the members of lwp_info in-class Add a constructor to initialize the waitstatus members. Initialize the others in the class directly. Change-Id: I10f885eb33adfae86e3c97b1e135335b540d7442 2021-10-21 Simon Marchi gdbserver: make thread_info non-POD Add a constructor and a destructor. The constructor takes care of the initialization that happened in add_thread, while the destructor takes care of the freeing that happened in free_one_thread. This is needed to make target_waitstatus non-POD, as thread_info contains a member of that type. Change-Id: I1db321b4de9dd233ede0d5c101950f1d6f1d13b7 2021-10-21 Andrew Pinski Fix ARMv8.4 for hw watchpoint and breakpoint Just like my previoius patch for ARMv8.1 and v8.2 (49ecef2a7da2ee9df4), this adds ARMv8.4 debug arch as being compatible for hw watchpoint and breakpoints. Refactor code slightly in nat/aarch64-linux-hw-point.c (aarch64_linux_get_debug_reg_capacity) Since the two locations which check the debug arch are the same code currently, it is a good idea to factor it out to a new function and just use that function from aarch64_linux_get_debug_reg_capacity. This is also the first step to support ARMv8.4 debug arch. 2021-10-21 Carl Love Fixes for gdb.mi/mi-break.exp Update the expected pattern for two of the tests. Matching pattern \" doesn't work. Use .* to match the \* pattern. 2021-10-21 Tom de Vries [gdb/tui] Fix breakpoint display functionality In commit 81e6b8eb208 "Make tui-winsource not use breakpoint_chain", a loop body was transformed into a lambda function body: ... - for (bp = breakpoint_chain; - bp != NULL; - bp = bp->next) + iterate_over_breakpoints ([&] (breakpoint *bp) -> bool ... and consequently: - a continue was replaced by a return, and - a final return was added. Then in commit 240edef62f0 "gdb: remove iterate_over_breakpoints function", we transformed back to a loop body: ... - iterate_over_breakpoints ([&] (breakpoint *bp) -> bool + for (breakpoint *bp : all_breakpoints ()) ... but without reverting the changes that introduced the two returns. Consequently, breakpoints no longer show up in the tui source window. Fix this by reverting the changes that introduced the two returns. Build on x86_64-linux, tested with all .exp test-cases that contain tuiterm_env. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28483 2021-10-21 Carl Love Fix test step-and-next-inline.cc The test expect the runto_main to stop at the first line of the function. Depending on the optimization level, gdb may stop in the prolog or after the prolog at the first line. To ensure the test stops at the first line of main, have it explicitly stop at a break point on the first line of the function. On PowerPC, the test passes when compiled with no optimization but fails with all levels of optimization due to gdb stopping in the prolog. 2021-10-21 Tom Tromey Fix latent Ada bug when accessing field offsets The "add accessors for field (and call site) location" patch caused a gdb crash when running the internal AdaCore testsuite. This turned out to be a latent bug in ada-lang.c. The immediate cause of the bug is that find_struct_field unconditionally uses TYPE_FIELD_BITPOS. This causes an assert for a dynamic type. This patch fixes the problem by doing two things. First, it changes find_struct_field to use a dummy value for the field offset in the situation where the offset is not actually needed by the caller. This works because the offset isn't used in any other way -- only as a result. Second, this patch assures that calls to find_struct_field use a resolved type when the offset is needed. For value_tag_from_contents_and_address, this is done by resolving the type explicitly. In ada_value_struct_elt, this is done by passing nullptr for the out parameters when they are not needed (the second call in this function already uses a resolved type). Note that, while we believe the parent field probably can't occur at a variable offset, the patch still updates this code path, just in case. I've updated an existing test case to reproduce the crash. I'm checking this in. 2021-10-21 Alan Modra -Waddress warning in ldelf.c ldelf.c: In function 'ldelf_after_open': ldelf.c:1049:43: warning: the comparison will always evaluate as 'true' for the address of 'elf_header' will never be NULL [-Waddress] 1049 | && elf_tdata (abfd)->elf_header != NULL | ^~ In file included from ldelf.c:37: ../bfd/elf-bfd.h:1957:21: note: 'elf_header' declared here 1957 | Elf_Internal_Ehdr elf_header[1]; /* Actual data, but ref like ptr */ * ldelf.c (ldelf_after_open): Remove useless elf_header test. 2021-10-21 Alan Modra Avoid -Waddress warnings in readelf Mainline gcc: readelf.c: In function 'find_section': readelf.c:349:8: error: the comparison will always evaluate as 'true' for the pointer operand in 'filedata->section_headers + (sizetype)((long unsigned int)i * 80)' must not be NULL [-Werror=address] 349 | ((X) != NULL \ | ^~ readelf.c:761:9: note: in expansion of macro 'SECTION_NAME_VALID' 761 | if (SECTION_NAME_VALID (filedata->section_headers + i) | ^~~~~~~~~~~~~~~~~~ This will likely be fixed in gcc, but inline functions are nicer than macros. * readelf.c (SECTION_NAME, SECTION_NAME_VALID), (SECTION_NAME_PRINT, VALID_SYMBOL_NAME, VALID_DYNAMIC_NAME), (GET_DYNAMIC_NAME): Delete. Replace with.. (section_name, section_name_valid, section_name_print), (valid_symbol_name, valid_dynamic_name, get_dynamic_name): ..these new inline functions. Update use throughout file. 2021-10-21 GDB Administrator Automatic date update in version.in 2021-10-20 Alan Modra PR28417, std::string no longer allows accepting nullptr_t PR 28417 * incremental.cc (Sized_relobj_incr::do_section_name): Avoid std:string undefined behaviour. * options.h (Search_directory::Search_directory): Likewise. 2021-10-20 Alan Modra Re: PR27625, powerpc64 gold __tls_get_addr calls My previous PR27625 patch had a problem or two. For one, the error "__tls_get_addr call lacks marker reloc" on processing some calls before hitting a call without markers typically isn't seen. Instead a gold assertion fails. Either way it would be a hard error, which triggers on a file contained in libphobos.a when running the gcc testsuite. A warning isn't even appropriate since the call involved is one built by hand without any of the arg setup relocations that might result in linker optimisation. So this patch reverts most of commit 0af4fcc25dd5, instead entirely ignoring the problem of mis-optimising old-style __tls_get_addr calls without marker relocs. We can't handle them gracefully without another pass over relocations before decisions are made about GOT entries in Scan::global or Scan::local. That seems too costly, just to link object files from 2009. What's more, there doesn't seem to be any way to allow the libphobos explicit __tls_get_addr call, but not old TLS sequences without marker relocs. Examining instructions before the __tls_get_addr call is out of the question: program flow might reach the call via a branch. Putting an R_PPC64_TLSGD marker with zero sym on the call might be a solution, but current linkers will then merrily optimise away the call! PR gold/27625 * powerpc.cc (Powerpc_relobj): Delete no_tls_marker_, tls_marker_, and tls_opt_error_ variables and accessors. Remove all uses. 2021-10-20 Tom Tromey Use std::string in print_one_catch_syscall This changes print_one_catch_syscall to use std::string, removing a bit of manual memory management. Use unique_xmalloc_ptr in breakpoint This changes struct breakpoint to use unique_xmalloc_ptr in a couple of spots, removing a bit of manual memory management. Use unique_xmalloc_ptr in bp_location This changes struct bp_location to use a unique_xmalloc_ptr, removing a bit of manual memory management. Use unique_xmalloc_ptr in watchpoint This changes struct watchpoint to use unique_xmalloc_ptr in a couple of places, removing a bit of manual memory management. Use unique_xmalloc_ptr in exec_catchpoint This changes struct exec_catchpoint to use a unique_xmalloc_ptr, removing a bit of manual memory management. Use unique_xmalloc_ptr in solib_catchpoint This changes struct solib_catchpoint to use a unique_xmalloc_ptr, removing a bit of manual memory management. 2021-10-20 Christian Biesinger Make c-exp.y work with Bison 3.8+ When using Bison 3.8, we get this error: ../../gdb/c-exp.y:3455:1: error: 'void c_print_token(FILE*, int, YYSTYPE)' defined but not used [-Werror=unused-function] That's because bison 3.8 removed YYPRINT support: https://savannah.gnu.org/forum/forum.php?forum_id=10047 Accordingly, this patch only defines that function for Bison < 3.8. Change-Id: I3cbf2f317630bb72810b00f2d9b2c4b99fa812ad 2021-10-20 GDB Administrator Automatic date update in version.in 2021-10-19 Tom de Vries [gdb/testsuite] Reimplement gdb.gdb/python-interrupts.exp as unittest The test-case gdb.gdb/python-interrupts.exp: - runs to captured_command_loop - sets a breakpoint at set_active_ext_lang - calls a python command - verifies the command triggers the breakpoint - sends a signal and verifies the result The test-case is fragile, because (f.i. with -flto) it cannot be guaranteed that captured_command_loop and set_active_ext_lang are available for setting breakpoints. Reimplement the test-case as unittest, using: - execute_command_to_string to capture the output - try/catch to catch the "Error while executing Python code" exception - a new hook selftests::hook_set_active_ext_lang to raise the signal Tested on x86_64-linux. 2021-10-19 Tom Tromey Check index in type::field This changes gdb to check the index that is passed to type::field. This caught one bug in the Ada code when running the test suite (actually I found the bug first, then realized that the check would have helped), so this patch fixes that as well. Regression tested on x86-64 Fedora 34. 2021-10-19 Tom Tromey Fix Rust lex selftest when using libiconv The Rust lex selftest fails on our Windows build. I tracked this down to a use of UTF-32 as a parameter to convert_between_encodings. Here, iconv_open succeeds, but the actual conversion of a tab character fails with EILSEQ. I suspect that "UTF-32" is being interpreted as big-endian, as changing the call to use "UTF-32LE" makes it work. This patch implements this fix. 2021-10-19 Tom Tromey Fix format_pieces selftest on Windows The format_pieces selftest currently fails on Windows hosts. The selftest doesn't handle the "%ll" -> "%I64" rewrite that the formatter may perform, but also gdbsupport was missing a configure check for PRINTF_HAS_LONG_LONG. This patch fixes both issues. 2021-10-19 Tom Tromey Fix bug in dynamic type resolution A customer-reported problem led us to a bug in dynamic type resolution. resolve_dynamic_struct will recursively call resolve_dynamic_type_internal, passing it the sub-object for the particular field being resolved. While it offsets the address here, it does not also offset the "valaddr" -- the array of bytes describing the memory. This patch fixes the bug, by offsetting both. A test case is included that can be used to reproduce the bug. 2021-10-19 Tom Tromey Always use std::function for self-tests Now that there is a register_test variant that accepts std::function, it seems to me that the 'selftest' struct and accompanying code is obsolete -- simply always using std::function is simpler. This patch implements this idea. 2021-10-19 Daniel Black Fix PR gdb/17917 Lookup build-id in remote binaries GDB doesn't support loading debug files using build-id from remote target filesystems. This is the case when gdbserver attached to a process and a gdb target remote occurs over tcp. With this change we make build-id lookups possible: (gdb) show debug-file-directory The directory where separate debug symbols are searched for is "/usr/local/lib/debug". (gdb) set debug-file-directory /usr/lib/debug (gdb) show sysroot The current system root is "target:". (gdb) target extended-remote :46615 Remote debugging using :46615 warning: Can not parse XML target description; XML support was disabled at compile time Reading /usr/sbin/mariadbd from remote target... warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead. Reading /usr/sbin/mariadbd from remote target... Reading symbols from target:/usr/sbin/mariadbd... Reading /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading symbols from target:/usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug... Reading /lib/x86_64-linux-gnu/libpcre2-8.so.0 from remote target... ... Before this change, the lookups would have been (GNU gdb (GDB) Fedora 10.2-3.fc34): (gdb) target extended-remote :46615 Remote debugging using :46615 Reading /usr/sbin/mariadbd from remote target... warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead. Reading /usr/sbin/mariadbd from remote target... Reading symbols from target:/usr/sbin/mariadbd... Reading /usr/sbin/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading /usr/sbin/.debug/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading /usr/lib/debug//usr/sbin/0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading /usr/lib/debug/usr/sbin//0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Reading target:/usr/lib/debug/usr/sbin//0a874dca5a7ff831396ddc0785d939a192efe3.debug from remote target... Missing separate debuginfo for target:/usr/sbin/mariadbd Try: dnf --enablerepo='*debug*' install /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug (No debugging symbols found in target:/usr/sbin/mariadbd) Observe it didn't look for /usr/lib/debug/.build-id/6e/0a874dca5a7ff831396ddc0785d939a192efe3.debug on the remote target (where it is) and expected them to be installed locally. As a minor optimization, this also changes the build-id lookup such that if sysroot is empty, no second lookup of the same location is performed. Change-Id: I5181696d271c325a25a0805a8defb8ab7f9b3f55 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17917 2021-10-19 Nick Clifton Fix a potential illegal memory access when testing for a special LTO symbol name. bfd * linker.c (_bfd_generic_link_add_one_symbol): Test for a NULL name before checking to see if the symbol is __gnu_lto_slim. * archive.c (_bfd_compute_and_write_armap): Likewise. binutils * nm.c (filter_symbols): Test for a NULL name before checking to see if the symbol is __gnu_lto_slim. * objcopy.c (filter_symbols): Likewise. 2021-10-19 GDB Administrator Automatic date update in version.in 2021-10-18 Weimin Pan CTF: incorrect underlying type setting for enumeration types A bug was filed against the incorrect underlying type setting for an enumeration type, which was caused by a copy and paste error. This patch fixes the problem by setting it by calling objfile_int_type, which was originally dwarf2_per_objfile::int_type, with ctf_type_size bits. Also add error checking on ctf_func_type_info call. 2021-10-18 GDB Administrator Automatic date update in version.in 2021-10-17 Alan Modra PR28459, readelf issues bogus warning I'd missed the fact that the .debug_rnglists dump doesn't exactly display the contents of the section. Instead readelf rummages through .debug_info looking for DW_AT_ranges entries, then displays the entries in .debug_rnglists pointed at, sorted. A simpler dump of the actual section contents might be more useful and robust, but it was likely done that way to detect overlap and holes. Anyway, the headers in .debug_rnglists besides the first are ignored, and limiting to the unit length of the first header fails if there is more than one unit. PR 28459 * dwarf.c (display_debug_ranges): Don't constrain data to length in header. 2021-10-17 GDB Administrator Automatic date update in version.in 2021-10-16 H.J. Lu ld: Adjust pr28158.rd for glibc 2.34 Adjust pr28158.rd for glibc 2.34: $ readelf -W --dyn-syms tmpdir/pr28158 Symbol table '.dynsym' contains 4 entries: Num: Value Size Type Bind Vis Ndx Name 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND 1: 0000000000000000 0 FUNC GLOBAL DEFAULT UND __libc_start_main@GLIBC_2.34 (2) 2: 0000000000000000 0 NOTYPE WEAK DEFAULT UND __gmon_start__ 3: 000000000040401c 4 OBJECT GLOBAL DEFAULT 23 foo@VERS_2.0 (3) $ vs older glibc: $ readelf -W --dyn-syms tmpdir/pr28158 Symbol table '.dynsym' contains 4 entries: Num: Value Size Type Bind Vis Ndx Name 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND 1: 0000000000000000 0 FUNC GLOBAL DEFAULT UND __libc_start_main@GLIBC_2.2.5 (3) 2: 0000000000000000 0 NOTYPE WEAK DEFAULT UND __gmon_start__ 3: 000000000040401c 4 OBJECT GLOBAL DEFAULT 23 foo@VERS_2.0 (2) $ * testsuite/ld-elf/pr28158.rd: Adjusted for glibc 2.34. 2021-10-16 GDB Administrator Automatic date update in version.in 2021-10-15 GDB Administrator Automatic date update in version.in 2021-10-14 Carl Love Powerpc: Add support for openat and fstatat syscalls [gdb] update ppc-linux-tdep.c Add argument to ppc_canonicalize_syscall for the wordsize. Add syscall entries for the openat and fstatat system calls. 2021-10-14 Tom de Vries [gdb/testsuite] Add .debug_loc support in dwarf assembler Add .debug_loc support in the dwarf assembler, and use it in new test-case gdb.dwarf2/loc-sec-offset.exp (which is based on gdb.dwarf2/loclists-sec-offset.exp). Tested on x86_64-linux. 2021-10-14 Alan Modra [GOLD] Re: PowerPC64: Don't pretend to support multi-toc We can't get at section->address() until everything is laid out, so trying to generalise the offset calculation rather than using a value of 0x8000 (the old object->toc_base_offset()) was bound to fail. got->g_o_t() is a little better than a hard-coded 0x8000. * powerpc.cc (Target_powerpc::Scan::local, global): Don't use toc_pointer() here. 2021-10-14 Alan Modra [GOLD] Two GOT sections for PowerPC64 Split .got into two piece, one with the header and entries for small model got entries, the other with entries for medium/large model got entries. The idea is to better support mixed pcrel/non-pcrel code where non-pcrel small-model .toc entries need to be within 32k of the toc pointer. * target.h (Target::tls_offset_for_local): Add got param. (Target::tls_offset_for_global): Likewise. (Target::do_tls_offset_for_local, do_tls_offset_for_global): Likewise. * output.h (Output_data_got::Got_entry::write): Add got param. * output.cc (Output_data_got::Got_entry::write): Likewise, pass to tls_offset_for_local/global calls. (Output_data_got::do_write): Adjust to suit. * s390.cc (Target_s390::do_tls_offset_for_local): Likewise. (Target_s390::do_tls_offset_for_global): Likewise. * powerpc.cc (enum Got_type): Extend with small types, move from class Target_powerpc. (Target_powerpc::biggot_): New. (Traget_powerpc::do_tls_offset_for_local, do_tls_offset_for_global, got_size, got_section, got_base_offset): Handle biggot_. (Target_powerpc::do_define_standard_symbols): Adjust. (Target_powerpc::make_plt_section, do_finalize_sections): Likewise. (Output_data_got_powerpc::Output_data_got_powerpc): Only make 64-bit header for small got section. (Output_data_got_powerpc::g_o_t): Only return a result for small got section. (Output_data_got_powerpc::write): Only write small got section header. (Target_powerpc::Scan::local, global): Select small/big Got_type and section to suit reloc. (Target_powerpc::Relocate::relocate): Similarly. (Sort_toc_sections): Rewrite. 2021-10-14 Alan Modra [GOLD] PowerPC64: Don't pretend to support multi-toc Code in powerpc.cc is pretending to support a per-object toc pointer value, but powerpc gold has no real support for multi-toc. This patch removes the pretense, tidying quite a lot in preparation for a followup patch. If multi-toc is ever to be supported, don't revert this patch but start by adding object parameter to toc_pointer() and an object to Branch_stub_key. * powerpc.cc (Powerpc_relobj::toc_base_offset): Delete. (Target_powerpc::toc_pointer): New function. Use throughout. (Target_powerpc::got_base_offset): New function. Use throughout.. (Output_data_got_powerpc::got_base_offset): ..in place of this. Delete. (Output_data_got_powerpc::Output_data_got_powerpc): Init header_index_ to -1u for 64-bit, and make header here. (Output_data_got_powerpc::set_final_data_size, reserve_ent): Don't make 64-bit header here. (Output_data_got_powerpc::g_o_t): Return toc pointer offset in section for 64-bit. Use throughout. (Stub_table): Remove toc_base_off_ from Branch_stub_key, and object param on add_long_branch_entry and find_long_branch_entry. Adjust all uses. 2021-10-14 Alan Modra Re: s12z/disassembler: call memory_error_func when appropriate Adjust for commit ba7c18a48457. * testsuite/gas/s12z/truncated.d: Update expected output. 2021-10-14 GDB Administrator Automatic date update in version.in 2021-10-13 Tom de Vries [gdb/exp] Improve message When printing a variable x in a subroutine foo: ... subroutine foo (x) integer(4) :: x (*) x(3) = 1 end subroutine foo ... where x is an array with unknown bounds, we get: ... $ gdb -q -batch outputs/gdb.fortran/array-no-bounds/array-no-bounds \ -ex "break foo" \ -ex run \ -ex "print x" Breakpoint 1 at 0x4005cf: file array-no-bounds.f90, line 18. Breakpoint 1, foo (x=...) at array-no-bounds.f90:18 18 x(3) = 1 $1 = ... Improve the error message by printing the details of the error, such that we have instead: ... $1 = ... This is a change in gdb/valprint.c, and grepping through the sources reveals that this is a common pattern. Tested on x86_64-linux. 2021-10-13 Carl Love PPC fix for stfiwx instruction (and additional stores with primary opcode of 31) [gdb] Fix address being recorded in rs6000-tdep.c, ppc_process_record_op31. The GDB record function was recording the variable addr that was passed in rather than the calculated effective address (ea) by the ppc_process_record_op31 function. 2021-10-13 Andrew Burgess gdb: improve error reporting from the disassembler If the libopcodes disassembler returns a negative value then this indicates that the disassembly failed for some reason. In disas.c, in the function gdb_disassembler::print_insn we can see how this is handled; when we get a negative value back, we call the memory_error function, which throws an exception. The problem here is that the address used in the memory_error call is gdb_disassembler::m_err_memaddr, which is set in gdb_disassembler::dis_asm_memory_error, which is called from within the libopcodes disassembler through the disassembler_info::memory_error_func callback. However, for this to work correctly, every time the libopcodes disassembler returns a negative value, the libopcodes disassembler must have first called the memory_error_func callback. My first plan was to make m_err_memaddr a gdb::optional, and assert that it always had a value prior to calling memory_error, however, a quick look in opcodes/*-dis.c shows that there _are_ cases where a negative value is returned without first calling the memory_error_func callback, for example in arc-dis.c and cris-dis.c. Now, I think that a good argument can be made that these disassemblers must therefore be broken, except for the case where we can't read memory, we should always be able to disassemble the memory contents to _something_, even if it's just '.word 0x....'. However, I certainly don't plan to go and fix all of the disassemblers. What I do propose to do then, is make m_err_memaddr a gdb::optional, but now, instead of always calling memory_error, I add a new path which just calls error complaining about an unknown error. This new path is only used if m_err_memaddr doesn't have a value (indicating that the memory_error_func callback was not called). To test this I just augmented one of the disassemblers to always return -1, before this patch I see this: Dump of assembler code for function main: 0x000101aa <+0>: Cannot access memory at address 0x0 And after this commit I now see: Dump of assembler code for function main: 0x000101aa <+0>: unknown disassembler error (error = -1) This doesn't really help much, but that's because there's no way to report non memory errors out of the disasembler, because, it was not expected that the disassembler would ever report non memory errors. 2021-10-13 Tom de Vries [gdb/testsuite] Fix gdb.fortran/call-no-debug.exp with native-gdbserver When running test-case gdb.fortran/call-no-debug.exp with target board native-gdbserver, I run into: ... (gdb) PASS: gdb.fortran/call-no-debug.exp: print string_func_ (&'abcdefg', 3) call (integer) string_func_ (&'abcdefg', 3)^M $2 = 0^M (gdb) FAIL: gdb.fortran/call-no-debug.exp: call (integer) string_func_ (&'abcdefg', 3) ... The problem is that gdb_test is used to match inferior output. Fix this by using gdb_test_stdio. Tested on x86_64-linux. 2021-10-13 Tom de Vries [gdb/testsuite] Require use_gdb_stub == 0 where appropriate When running with target board native-gdbserver, we run into a number of FAILs due to use of the start command (and similar), which is not supported when use_gdb_stub == 1. Fix this by: - requiring use_gdb_stub == 0 for the entire test-case, or - guarding some tests in the test-case with use_gdb_stub == 0. Tested on x86_64-linux. 2021-10-13 Tom de Vries [gdb/testsuite] Fix test name in gdb.python/python.exp When running test-case gdb.python/python.exp, we have: ... PASS: gdb.python/python.exp: starti via gdb.execute, not from tty PASS: gdb.python/python.exp: starti via interactive input ... The two tests are instances of the same test, with different values for starti command argument from_tty, so it's strange that the test names are so different. This is due to using a gdb_test nested in a gdb_test_multiple, with the inner one using a different test name than the outer one. [ That could still make sense if both produced passes, but that's not the case here. ] Fix this by using $gdb_test_name, such that we have: ... PASS: gdb.python/python.exp: starti via gdb.execute, not from tty PASS: gdb.python/python.exp: starti via gdb.execute, from tty ... Also make this more readable by using variables. Tested on x86_64-linux. 2021-10-13 Tom de Vries [gdb/testsuite] Fix gdb.base/batch-exit-status.exp with native-gdbserver When running test-case gdb.base/batch-exit-status.exp with target board native-gdbserver, I run into (added missing double quotes for clarity): ... builtin_spawn $build/gdb/testsuite/../../gdb/gdb -nw -nx \ -data-directory $build/gdb/testsuite/../data-directory \ -iex "set height 0" -iex "set width 0" \ -ex "set auto-connect-native-target off" \ -iex "set sysroot" -batch ""^M : No such file or directory.^M PASS: gdb.base/batch-exit-status.exp: 1x: \ No such file or directory: [lindex $result 2] == 0 FAIL: gdb.base/batch-exit-status.exp: 1x: \ No such file or directory: [lindex $result 3] == $expect_status ... As in commit a02a90c114c "[gdb/testsuite] Set sysroot earlier in local-board.exp", the problem is the use of -ex for "set auto-connect-native-target off", which makes that the last command to be executed, and consequently determines the return status. Fix this by using -iex instead. Tested on x86_64-linux. 2021-10-13 Tom de Vries [gdb/testsuite] Remove quit in gdb.arch/i386-mpx.exp When running test-case gdb.arch/i386-mpx.exp with target board native-gdbserver, I run into: ... (gdb) PASS: gdb.arch/i386-mpx.exp: verify size for bnd0 Remote debugging from host ::1, port 42328^M quit^M A debugging session is active.^M ^M Inferior 1 [process 19679] will be killed.^M ^M Quit anyway? (y or n) monitor exit^M Please answer y or n.^M A debugging session is active.^M ^M Inferior 1 [process 19679] will be killed.^M ^M Quit anyway? (y or n) WARNING: Timed out waiting for EOF in server after monitor exit ... The problem is that the test-case sends a quit at the end (without verifying the result of this in any way): ... send_gdb "quit\n" ... Fix this by removing the quit. Tested on x86_64-linux. 2021-10-13 GDB Administrator Automatic date update in version.in 2021-10-12 GDB Administrator Automatic date update in version.in 2021-10-11 Srinath Parvathaneni [ARM] Add support for M-profile MVE extension This patch adds support for the M-profile MVE extension, which includes the following: - New M-profile XML feature m-profile-mve - MVE vector predication status and control register (VPR) - p0 pseudo register (contained in the VPR) - q0 ~ q7 pseudo vector registers - New feature bits - Documentation update Pseudo register p0 is the least significant bits of vpr and can be accessed as $p0 or displayed through $vpr. For more information about the register layout, please refer to [1]. The q0 ~ q7 registers map back to the d0 ~ d15 registers, two d registers per q register. The register dump looks like this: (gdb) info reg all r0 0x0 0 r1 0x0 0 r2 0x0 0 r3 0x0 0 r4 0x0 0 r5 0x0 0 r6 0x0 0 r7 0x0 0 r8 0x0 0 r9 0x0 0 r10 0x0 0 r11 0x0 0 r12 0x0 0 sp 0x0 0x0 <__Vectors> lr 0xffffffff -1 pc 0xd0c 0xd0c xpsr 0x1000000 16777216 d0 0 (raw 0x0000000000000000) d1 0 (raw 0x0000000000000000) d2 0 (raw 0x0000000000000000) d3 0 (raw 0x0000000000000000) d4 0 (raw 0x0000000000000000) d5 0 (raw 0x0000000000000000) d6 0 (raw 0x0000000000000000) d7 0 (raw 0x0000000000000000) d8 0 (raw 0x0000000000000000) d9 0 (raw 0x0000000000000000) d10 0 (raw 0x0000000000000000) d11 0 (raw 0x0000000000000000) d12 0 (raw 0x0000000000000000) d13 0 (raw 0x0000000000000000) d14 0 (raw 0x0000000000000000) d15 0 (raw 0x0000000000000000) fpscr 0x0 0 vpr 0x0 [ P0=0 MASK01=0 MASK23=0 ] s0 0 (raw 0x00000000) s1 0 (raw 0x00000000) s2 0 (raw 0x00000000) s3 0 (raw 0x00000000) s4 0 (raw 0x00000000) s5 0 (raw 0x00000000) s6 0 (raw 0x00000000) s7 0 (raw 0x00000000) s8 0 (raw 0x00000000) s9 0 (raw 0x00000000) s10 0 (raw 0x00000000) s11 0 (raw 0x00000000) s12 0 (raw 0x00000000) s13 0 (raw 0x00000000) s14 0 (raw 0x00000000) s15 0 (raw 0x00000000) s16 0 (raw 0x00000000) s17 0 (raw 0x00000000) s18 0 (raw 0x00000000) s19 0 (raw 0x00000000) s20 0 (raw 0x00000000) s21 0 (raw 0x00000000) s22 0 (raw 0x00000000) s23 0 (raw 0x00000000) s24 0 (raw 0x00000000) s25 0 (raw 0x00000000) s26 0 (raw 0x00000000) s27 0 (raw 0x00000000) s28 0 (raw 0x00000000) s29 0 (raw 0x00000000) s30 0 (raw 0x00000000) s31 0 (raw 0x00000000) q0 {u8 = {0x0 }, u16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, u32 = {0x0, 0x0, 0x0, 0x0}, u64 = {0x0, 0x0}, f32 = {0x0, 0x0, 0x0, 0x0}, f64 = {0x0, 0x0}} q1 {u8 = {0x0 }, u16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, u32 = {0x0, 0x0, 0x0, 0x0}, u64 = {0x0, 0x0}, f32 = {0x0, 0x0, 0x0, 0x0}, f64 = {0x0, 0x0}} q2 {u8 = {0x0 }, u16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, u32 = {0x0, 0x0, 0x0, 0x0}, u64 = {0x0, 0x0}, f32 = {0x0, 0x0, 0x0, 0x0}, f64 = {0x0, 0x0}} q3 {u8 = {0x0 }, u16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, u32 = {0x0, 0x0, 0x0, 0x0}, u64 = {0x0, 0x0}, f32 = {0x0, 0x0, 0x0, 0x0}, f64 = {0x0, 0x0}} q4 {u8 = {0x0 }, u16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, u32 = {0x0, 0x0, 0x0, 0x0}, u64 = {0x0, 0x0}, f32 = {0x0, 0x0, 0x0, 0x0}, f64 = {0x0, 0x0}} q5 {u8 = {0x0 }, u16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, u32 = {0x0, 0x0, 0x0, 0x0}, u64 = {0x0, 0x0}, f32 = {0x0, 0x0, 0x0, 0x0}, f64 = {0x0, 0x0}} q6 {u8 = {0x0 }, u16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, u32 = {0x0, 0x0, 0x0, 0x0}, u64 = {0x0, 0x0}, f32 = {0x0, 0x0, 0x0, 0x0}, f64 = {0x0, 0x0}} q7 {u8 = {0x0 }, u16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, u32 = {0x0, 0x0, 0x0, 0x0}, u64 = {0x0, 0x0}, f32 = {0x0, 0x0, 0x0, 0x0}, f64 = {0x0, 0x0}} p0 0x0 0 Built and regtested with a simulator. [1] https://developer.arm.com/documentation/ddi0553/bn Co-Authored-By: Luis Machado 2021-10-11 Luis Machado [ARM] Refactor pseudo register numbering The pseudo register handling for ARM uses some hardcoded constants to determine types and names. In preparation to the upcoming MVE support patch (that will add another pseudo register), this patch refactors and reorganizes things in order to simplify handling of future pseudo registers. We keep track of the first pseudo register number in a group and the number of pseudo registers in that group. Right now we only have the S and Q pseudo registers. 2021-10-11 Luis Machado [ARM] Small refactoring of arm gdbarch initialization This is in preparation to MVE support, where we will define another pseudo register. We need to define the pseudo register numbers *after* accounting for all the registers in the XML description, so move the call to tdesc_use_registers up. If we don't do it, GDB's register count won't consider registers contained in the XML but ignored by GDB, throwing the register numbering off. 2021-10-11 Luis Machado [ARM] Refactor some constants In preparation for the MVE extension patch, this one refactors some of the register-related constants we have for ARM. Basically I'm separating counting constants from numbering constants. For example, ARM_A1_REGNUM is a numbering constant, whereas ARM_NUM_ARG_REGS is a counting constant. 2021-10-11 Tom de Vries [gdb/testsuite] Fix FAIL in gdb.mi/mi-var-child-f.exp When running test-case gdb.mi/mi-var-child-f.exp on openSUSE Tumbleweed (with glibc 2.34) I run into: ... (gdb) ^M PASS: gdb.mi/mi-var-child-f.exp: mi runto prog_array Expecting: ^(-var-create array \* array[^M ]+)?(\^done,name="array",numchild="[0-9]+",value=".*",type=.*,has_more="0"[^M ]+[(]gdb[)] ^M [ ]*) -var-create array * array^M &"Attempt to use a type name as an expression.\n"^M ^error,msg="-var-create: unable to create variable object"^M (gdb) ^M FAIL: gdb.mi/mi-var-child-f.exp: create local variable array (unexpected output) ... The problem is that the name array is used both: - as the name for a local variable - as the name of a type in glibc, in file malloc/dynarray-skeleton.c, as included by nss/nss_files/files-hosts.c. Fix this by ignoring the shared lib symbols. Likewise in a couple of other fortran tests. Tested on x86_64-linux. 2021-10-11 Andrew Burgess z80/disassembler: call memory_error_func when appropriate If a call to the read_memory_func fails then we should call the memory_error_func to notify the user of the disassembler of the address that was a problem. Without this GDB will report all memory errors as being at address 0x0. opcodes/ChangeLog: * z80-dis.c (fetch_data): Call memory_error_func if the read_memory_func call fails. 2021-10-11 Andrew Burgess s12z/disassembler: call memory_error_func when appropriate If a call to the read_memory_func fails then we should call the memory_error_func to notify the user of the disassembler of the address that was a problem. Without this GDB will report all memory errors as being at address 0x0. opcodes/ChangeLog: * s12z-disc.c (abstract_read_memory): Call memory_error_func if the read_memory_func call fails. 2021-10-11 Tom de Vries [gdb/testsuite] Fix double debug info in gdb.dwarf2/dw2-ref-missing-frame.exp A mistake slipped in in commit a5ea23036d8 "[gdb/testsuite] Use function_range in gdb.dwarf2/dw2-ref-missing-frame.exp". Before the commit the main file was compiled with debug info, and the two others not: ... if {[prepare_for_testing_full "failed to prepare" \ [list $testfile {} $srcfile {} $srcfuncfile {} \ $srcmainfile debug]]} { ... After the commit, all were compiled with debug info, and consequently, there are two versions of debug info for $srcfuncfile. This shows up as a FAIL when running the test-case with target boards readnow and cc-with-debug-names. Fix this by using prepare_for_testing_full, as before. Tested on x86_64-linux. Fixes: a5ea23036d8 ("[gdb/testsuite] Use function_range in gdb.dwarf2/dw2-ref-missing-frame.exp") 2021-10-11 Tom de Vries [gdb/testsuite] Use require for ensure_gdb_index Replace: ... if { [ensure_gdb_index $binfile] == -1 } { return -1 } ... with: ... require {ensure_gdb_index $binfile} != -1 ... and consequently, add a missing UNTESTED message. Tested on x86_64-linux, both with native and target board readnow. 2021-10-11 Tom de Vries [gdb/testsuite] Handle readnow in ensure_gdb_index When running test-case gdb.base/with-mf.exp with target board readnow, I run into: ... FAIL: gdb.base/with-mf.exp: check if index present ... This is since commit 6010fb0c49e "[gdb/testsuite] Fix full buffer in gdb.rust/dwindex.exp". Before that commit, the proc ensure_gdb_index would treat the line: ... .gdb_index: faked for "readnow"^M ... as proof that an index is already present (which is incorrect). Now, instead it generates aforementioned FAIL and continues to generate an index. Fix this by explicitly handling the readnow case in proc ensure_gdb_index, such that we bail out instead. Tested on x86_64-linux. 2021-10-11 Tom de Vries [gdb/testsuite] Fix gdb.dwarf2/gdb-add-index-symlink.exp The test-case gdb.dwarf2/gdb-add-index-symlink.exp interpretes a failure to add an index as a failure to add an index for a symlink: ... if { [ensure_gdb_index $symlink] == -1 } { fail "Unable to call gdb-add-index with a symlink to a symfile" return -1 } ... However, it's possible that the gdb-add-index also fails with a regular file. Add a check for that situation. Tested on x86_64-linux. 2021-10-11 Tom de Vries [gdb/testsuite] Add proc require in lib/gdb.exp Add a new proc require in lib/gdb.exp, and use it to shorten: ... if { [gdb_skip_xml_test] } { # Valgrind gdbserver requires gdb with xml support. untested "missing xml support" return 0 } ... into: ... require gdb_skip_xml_test 0 ... Tested on x86_64-linux, both with and without a trigger patch that forces gdb_skip_xml_test to return 1. 2021-10-11 Michael Forney bfd: Remove use of void pointer arithmetic This is not valid in ISO C. Instead, use a pointer to bfd_byte. * peicode.h (pe_bfd_object_p): Remove use of void pointer arithmetic. 2021-10-11 GDB Administrator Automatic date update in version.in 2021-10-10 GDB Administrator Automatic date update in version.in 2021-10-09 Tom de Vries [gdb] Make execute_command_to_string return string on throw The pattern for using execute_command_to_string is: ... std::string output; output = execute_fn_to_string (fn, term_out); ... This results in a problem when using it in a try/catch: ... try { output = execute_fn_to_string (fn, term_out) } catch (const gdb_exception &e) { /* Use output. */ } ... If an expection was thrown during execute_fn_to_string, then the output remains unassigned, while it could be worthwhile to known what output was generated by gdb before the expection was thrown. Fix this by returning the string using a parameter instead: ... execute_fn_to_string (output, fn, term_out) ... Also add a variant without string parameter, to support places where the function is used while ignoring the result: ... execute_fn_to_string (fn, term_out) ... Tested on x86_64-linux. 2021-10-09 Tom de Vries [gdb/testsuite] Add check-readmore Consider the gdb output: ... 27 return SYSCALL_CANCEL (nanosleep, requested_time, remaining);^M (gdb) ^M Thread 2 "run-attach-whil" stopped.^M ... When trying to match the gdb prompt using gdb_test which uses '$gdb_prompt $', it may pass or fail. This sort of thing needs to be fixed (see commit b0e2f96b56b), but there's currently no way to reliably find this type of FAILs. We have check-read1, but that one actually make the test pass reliably. We need something like the opposite of check-read1: something that makes expect read a bit slower, or more exhaustively. Add a new test target check-readmore that implements this. There are two methods of implementing this in read1.c: - the first method waits a bit before doing a read - the second method does a read and then decides whether to return or to wait a bit and do another read, and so on. The second method is potentially faster, has less risc of timeout and could potentially detect more problems. The first method has a simpler implementation. The second method is enabled by default. The default waiting period is 10 miliseconds. The first method can be enabled using: ... $ export READMORE_METHOD=1 ... and the waiting period can be specified in miliseconds using: ... $ export READMORE_SLEEP=9 ... Also a log file can be specified using: ... $ export READMORE_LOG=$(pwd -P)/LOG ... Tested on x86_64-linux. Testing with check-readmore showed these regressions: ... FAIL: gdb.base/bp-cmds-continue-ctrl-c.exp: run: stop with control-c (continue) FAIL: gdb.base/bp-cmds-continue-ctrl-c.exp: attach: stop with control-c (continue) ... I have not been able to find a problem in the test-case, and I think it's the nature of both the test-case and readmore that makes it run longer. Make these pass by increasing the alarm timeout from 60 to 120 seconds. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27957 2021-10-09 Tom de Vries [gdb/testsuite] Fix fortran module tests with stressed cpu When running these test-cases: - gdb.fortran/info-modules.exp - gdb.fortran/module.exp - gdb.mi/mi-fortran-modules.exp in conjunction with: ... $ stress -c $(($(cat /proc/cpuinfo | grep -c "^processor") + 1)) ... I run into timeouts. Fix this by using: - "set auto-solib-add off" to avoid symbols of shared libs (which doesn't work for libc, now that libpthread_name_p has been updated to match libc) - "nosharedlibrary" to avoid symbols of libc Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28133 2021-10-09 Guillermo E. Martinez PR28415, invalid read in xtensa_read_table_entries PR 28415 PR 28416 * elf32-xtensa.c (xtensa_read_table_entries): Handle error return from retrieve_contents. 2021-10-09 GDB Administrator Automatic date update in version.in 2021-10-08 Tom de Vries [gdb/testsuite] Fix gdb.base/info-types-c++.exp with stressed cpu When running test-case gdb.base/info-types-c++.exp in conjunction with: ... $ stress -c $(($(cat /proc/cpuinfo | grep -c "^processor") + 1)) ... we get: ... FAIL: gdb.base/info-types-c++.exp: info types (timeout) ... Fix this by setting auto-solib-add to off. Tested on x86_64-linux. 2021-10-08 Tom de Vries [gdb/testsuite] Fix gdb.base/info_sources_2.exp with check-read1 When running test-case gdb.base/info_sources_2.exp with check-read1, I run into: ... FAIL: gdb.base/info_sources_2.exp: args: : info sources (timeout) ... Fix this by consuming a "$src1, $src2, ..., $srcn: line bit by bit rather than as one whole line. Also add the missing handling of "Objfile has no debug information". Tested on x86_64-linux. 2021-10-08 Tom de Vries [gdb/testsuite] Fix gdb.mi/gdb2549.exp with check-read1 When running test-case gdb.mi/gdb2549.exp with check-read1, I run into: ... FAIL: gdb.mi/gdb2549.exp: register values x (timeout) ... Fix this by applying the same fix as for "register values t" in commit 478e490a4df "[gdb/testsuite] Fix gdb.mi/gdb2549.exp with check-read1". Tested on x86_64-linux. 2021-10-08 Tom de Vries [gdb/testsuite] Fix gdb.base/bt-on-error-and-warning.exp with check-read1 When running test-case gdb.base/bt-on-error-and-warning.exp with check-read1, I run into: ... (gdb) maint internal-error foobar^M src/gdb/maint.c:82: internal-error: foobar^M A problem internal to GDB has been detectedFAIL: \ gdb.base/bt-on-error-and-warning.exp: problem=internal-error, mode=on: \ scan for backtrace (GDB internal error) Resyncing due to internal error. ,^M ... The corresponding gdb_test_multiple in the test-case contains: ... -early -re "^A problem internal to GDB has been detected,\r\n" { incr header_lines exp_continue } ... but instead this one triggers in gdb_test_multiple: ... -re ".*A problem internal to GDB has been detected" { fail "$message (GDB internal error)" gdb_internal_error_resync set result -1 } ... Fix this by likewise shortening the regexp to before the comma. Tested on x86_64-linux. 2021-10-08 Tom de Vries [gdb/testsuite] Add nopie in two test-cases When running test-case gdb.dwarf2/dw2-restrict.exp on openSUSE Leap 15.2 with gcc-PIE installed (switching compiler default to -fPIE/-pie), I get: ... gdb compile failed, ld: outputs/gdb.dwarf2/dw2-restrict/dw2-restrict0.o: \ warning: relocation in read-only section `.text' ld: warning: creating DT_TEXTREL in a PIE UNTESTED: gdb.dwarf2/dw2-restrict.exp: failed to prepare ... This is due to using a hardcoded .S file that was generated with -fno-PIE. Fix this by adding the missing nopie. Likewise in gdb.arch/amd64-tailcall-noret.exp. Tested on x86_64-linux. 2021-10-08 GDB Administrator Automatic date update in version.in 2021-10-07 Tom de Vries [gdb/testsuite] Fix gdb.threads/check-libthread-db.exp with glibc 2.34 When running test-case gdb.threads/check-libthread-db.exp on openSUSE Tumbleweed (with glibc 2.34) I get: ... (gdb) continue^M Continuing.^M [Thread debugging using libthread_db enabled]^M Using host libthread_db library "/lib64/libthread_db.so.1".^M Stopped due to shared library event:^M Inferior loaded /lib64/libm.so.6^M /lib64/libc.so.6^M (gdb) FAIL: gdb.threads/check-libthread-db.exp: user-initiated check: continue ... The check expect the inferior to load libpthread, but since glibc 2.34 libpthread has been integrated into glibc, and consequently it's no longer a dependency: ... $ ldd outputs/gdb.threads/check-libthread-db/check-libthread-db linux-vdso.so.1 (0x00007ffe4cae4000) libm.so.6 => /lib64/libm.so.6 (0x00007f167c77c000) libc.so.6 => /lib64/libc.so.6 (0x00007f167c572000) /lib64/ld-linux-x86-64.so.2 (0x00007f167c86e000) ... Fix this by updating the regexp to expect libpthread or libc. Tested on x86_64-linux. 2021-10-07 Tom de Vries [gdb/testsuite] Fix gdb.guile/scm-type.exp with gcc 4.8 With gcc 7.5.0, I get: ... (gdb) guile (print (type-range (field-type (type-field (value-type \ (value-dereference f)) "items"))))^M = (0 0)^M (gdb) PASS: gdb.guile/scm-type.exp: lang_cpp: test_range: \ on flexible array member: $cmd ... but with gcc 4.8.5, I get instead: ... (gdb) guile (print (type-range (field-type (type-field (value-type \ (value-dereference f)) "items"))))^M = (0 -1)^M (gdb) FAIL: gdb.guile/scm-type.exp: lang_cpp: test_range: \ on flexible array member: $cmd ... There's a difference in debug info. With gcc 4.8.5, we have: ... <2><224>: Abbrev Number: 15 (DW_TAG_member) <225> DW_AT_name : items <22b> DW_AT_type : <0x231> <1><231>: Abbrev Number: 4 (DW_TAG_array_type) <232> DW_AT_type : <0x105> <2><23a>: Abbrev Number: 16 (DW_TAG_subrange_type) <23b> DW_AT_type : <0x11a> <23f> DW_AT_upper_bound : 0xffffffffffffffff ... and with gcc 7.5.0, we have instead: ... <2><89f>: Abbrev Number: 12 (DW_TAG_member) <8a0> DW_AT_name : items <8a6> DW_AT_type : <0x8ac> <1><8ac>: Abbrev Number: 17 (DW_TAG_array_type) <8ad> DW_AT_type : <0x29d> <2><8b5>: Abbrev Number: 41 (DW_TAG_subrange_type) <2><8b6>: Abbrev Number: 0 ... As mentioned in commit 858c8f2c1b9 "gdb/testsuite: adjust gdb.python/flexible-array-member.exp expected pattern": ... Ideally, GDB would present a consistent and documented value for an array member declared with size 0, regardless of how the debug info looks like. ... As in gdb.python/flexible-array-member.exp, change the test to accept the two values. Tested on x86_64-linux. 2021-10-07 Simon Marchi gdb: add accessors for field (and call site) location Add accessors for the various location values in struct field. This lets us assert that when we get a location value of a certain kind (say, bitpos), the field's location indeed contains a value of that kind. Remove the SET_FIELD_* macros, instead use the new setters directly. Update the FIELD_* macros used to access field locations to go through the getters. They will be removed in a subsequent patch. There are places where the FIELD_* macros are used on call_site_target structures, because it contains members of the same name (loc_kind and loc). For now, I have replicated the getters/setters in call_site_target. But we could perhaps eventually factor them in a "location" structure that can be used at both places. Note that the field structure, being zero-initialized, defaults to a bitpos location with value 0. While writing this patch, I tried to make it default to an "unset" location, to catch places where we would miss setting a field's location. However, I found that some places relied on the default being "bitpos 0", so I left it as-is. This change could always be done as follow-up work, making these places explicitly set the "bitpos 0" location. I found two issues to fix: - I got some failures in the gdb.base/infcall-nested-structs-c++.exp test. They were caused by two functions in amd64-tdep.c using TYPE_FIELD_BITPOS before checking if the location is of the bitpos kind, which they do indirectly through `field_is_static`. Simply move getting the bitpos below the field_is_static call. - I got a failure in gdb.xml/tdesc-regs.exp. It turns out that in make_gdb_type_enum, we set enum field values using SET_FIELD_BITPOS, and later access them through FIELD_ENUMVAL. Fix that by using set_loc_enumval to set the value. Change-Id: I53d3734916c46457576ba11dd77df4049d2fc1e8 2021-10-07 Philipp Tomsich RISC-V: Support aliases for Zbs instructions Add aliases for the non-immediate mnemonics of b{set,clr,inv,ext} to yencode the respective immediate insn b{set,clr,inv,ext}i when the second source operand is an immediate. 2021-01-11 Philipp Tomsich gas/ * testsuite/gas/riscv/b-ext.d: Add tests. * testsuite/gas/riscv/b-ext.s: Likewise. * testsuite/gas/riscv/b-ext-64.d: Likewise. * testsuite/gas/riscv/b-ext-64.s: Likewise. opcodes/ * riscv-opc.c (riscv_opcodes): Add aliases for Zbs. Suggested-by: Jan Beulich 2021-10-07 Philipp Tomsich RISC-V: Add support for Zbs instructions This change adds the Zbs instructions from the Zbs 1.0.0 specification. See https://github.com/riscv/riscv-bitmanip/releases/tag/1.0.0 for the frozen specification. 2021-01-09 Philipp Tomsich bfd/ * elfxx-riscv.c (riscv_supported_std_z_ext): Added zbs. gas/ * config/tc-riscv.c (riscv_multi_subset_supports): Handle INSN_CLASS_ZBS. * testsuite/gas/riscv/b-ext.d: Test Zbs instructions. * testsuite/gas/riscv/b-ext.s: Likewise. * testsuite/gas/riscv/b-ext-64.d: Likewise. * testsuite/gas/riscv/b-ext-64.s: Likewise. include/ * opcode/riscv-opc.h: Added MASK/MATCH/DECLARE_INSN for Zbs. * opcode/riscv.h (riscv_insn_class): Added INSN_CLASS_ZBS. opcodes/ * riscv-opc.c (riscv_supported_std_z_ext): Add zbs. 2021-10-07 Philipp Tomsich RISC-V: Update extension version for Zb[abc] to 1.0.0 2021-10-06 Philipp Tomsich bfd/ * elfxx-riscv.c (riscv_supported_std_z_ext): Update the version number for zba, zbb and zbc to 1.0.0 Version-changes: 3 - Updated version numbers for zba, zbb and zbc to 1.0.0 2021-10-07 Philipp Tomsich RISC-V: Split Zb[abc] into commented sections The Zb[abc] opcodes are bundled just below the Privileged opcodes in riscv_opcodes, possibly giving the appearance that they are part of the Privileged spec for an uninitiated reader. This separates them out and adds comments above each section to clearly identify them as Zba, Zbb or Zbc opcodes. 2021-10-04 Philipp Tomsich opcodes/ * riscv-opc.c: Split of Zb[abc] instructions and add comments. 2021-10-07 Alan Modra PR28423, use-after-free in objdump XCOFF archives use a bi-directional linked list for file members. So one member points to both the previous member and the next member. Members may not be sequentially ordered in the file. This of course is over-engineered nonsense and an attractive target for fuzzers. (There is even a free list of members!) The testcase in PR28423 is an XCOFF archive with one member pointing to itself, which results in lots of bad behaviour. For example, "ar t" never terminates. The use-after-free with "objdump -r" happens like this: The first archive element is opened, its symbols are read and "canonicalized" for objdump, then relocations are read and printed. Those relocations use the canonicalized symbols, and also happen to be cached by the coff bfd backend support. objdump frees the symbols. The next archive element is then opened. This must be done before the first element is closed, because finding the next element uses data held in the currect element. Unfortunately the next element happens to be the original, so we aren't opening, we're reopening a bfd which has cached data. When the relocations are printed they use the cached copy containing references to the freed canonical symbols. This patch adds a little sanity checking to the XCOFF "open next archive file" support, so that it rejects archive members pointing at themselves. That is sufficient to cure this problem. Anything more is overkill. If someone deliberately fuzzes an XCOFF archive with an element loop then reports an "ar" bug when it runs forever, they will find their bug report closed WONTFIX. PR 28423 * coff-rs6000.c (_bfd_xcoff_read_ar_hdr): Save size occupied by member name in areltdata.extra_size. (_bfd_xcoff_openr_next_archived_file): Sanity check nextoff. * coff64-rs6000.c (xcoff64_openr_next_archived_file): Call _bfd_xcoff_openr_next_archived_file. 2021-10-07 Alan Modra PR28422, build_id use-after-free This fixes a bug in commit 5d9bbb73c1df. All fields preserved from a bfd in struct bfd_preserve need to be cleared in bfd_reinit. PR 28422 * format.c (bfd_reinit): Clear build_id. 2021-10-07 Alan Modra Change ridiculous section size error Rather than reporting "memory exhausted", report "file truncated". You can hit this error on small fuzzed object files, or on files that are actually truncated. In either case sizes can be such that an out of memory error is a little confusing. * compress.c (bfd_get_full_section_contents): Set bfd_error_file_truncated rather than bfd_error_no_memory when section size exceeds file size. 2021-10-07 Tom de Vries [gdb/testsuite] Fix FAIL in gdb.base/annota1.exp On openSUSE tumbleweed I run into: ... FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout) ... due to a message related to libthread_db: ... ^Z^Zstarting^M [Thread debugging using libthread_db enabled]^M Using host libthread_db library "/lib64/libthread_db.so.1".^M ^M ^Z^Zframes-invalid^M ... which is not matched by the regexp. Fix this by updating the regexp. Tested on x86_64-linux. 2021-10-07 Tom de Vries [gdb/testsuite] Refactor regexp in gdb.base/annota1.exp Refactor regexp in gdb.base/annota1.exp to reduce indentation and repetition. Tested on x86_64-linux. 2021-10-07 GDB Administrator Automatic date update in version.in 2021-10-06 Andrew Burgess gdb/doc: improve 'show print elements' description The documentation for 'show print elements' contains the line: If the number is 0, then the printing is unlimited. However, this line is now out of date as can be seen by this GDB session: (gdb) set print elements 0 (gdb) show print elements Limit on string chars or array elements to print is unlimited. The value 0 does indeed mean unlimited, and this is described in the 'set print elements' section, however, for 'show print elements' the user will never see the value 0, so lets just remove that bit from the docs. 2021-10-06 Tom de Vries [gdb/testsuite] Fix FAIL in gdb.tui/corefile-run.exp When running test-case gdb.tui/corefile-run.exp on openSUSE Tumbleweed, I run into: ... PASS: gdb.tui/corefile-run.exp: load corefile FAIL: gdb.tui/corefile-run.exp: run until the end ... What's going on is easier to see when also doing dump_screen if check_contents passes, and inspecting state at the preceding PASS: ... +-------------------------------------------------------------------------+ exec No process In: L?? PC: ?? [New LWP 16629] [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". Core was generated by `/data/gdb_versions/devel/build/gdb/testsuite/output s/gdb.tui/corefile-run/corefi'. Program terminated with signal SIGTRAP, Trace/breakpoint trap. #0 main () --Type for more, q to quit, c to continue without paging-- ... The problem is that we're getting a pagination prompt, and the subsequent run command is interpreted as an answer to that prompt. Fix this by: - detecting the gdb prompt in response to "load corefile", such that we detect the failure earlier, and - doing a "set pagination off" in Term::clean_restart. Tested on x86_64-linux. 2021-10-06 Alan Modra PR28420, ecoff fuzzing failures PR 28420 * coff-mips.c (mips_adjust_reloc_in): Replace abort with error message and return. * ecoff.c (ecoff_slurp_reloc_table): Remove assertion and aborts, instead handle errors gracefully. 2021-10-06 Alan Modra PR28402, fail to allocate line number array This fixes a situation where the COFF code allocated memory for internal representaion arrays before reading the external file data. That meant the allocation didn't have any sanity check against file size. PR 28402 * coffcode.h (buy_and_read): Malloc rather than alloc memory. (coff_slurp_line_table): Read native line number info before allocating memory for internal line number array. Adjust error paths to suit. Remove now unnecessary line number count check. (coff_slurp_reloc_table): Adjust to suit buy_and_read change. 2021-10-06 Alan Modra PR28403, null pointer dereference in disassemble_bytes Indexing of symbol and howto arrays wasn't checked in aout targets. PR 28403 * aout-ns32k.c (MY (reloc_howto)): Sanity check howto_table index. Make r_index unsigned. (MY_swap_std_reloc_in): Make r_index unsigned. * aoutx.h (MOVE_ADDRESS): Sanity check symbol r_index. (aout_link_input_section_std): Make r_index unsigned. (aout_link_input_section_ext): Likewise. * i386lynx.c (MOVE_ADDRESS): Sanity check symbol r_index. (swap_ext_reloc_in, swap_std_reloc_in): Make r_index unsigned. * pdp11.c (MOVE_ADDRESS): Sanity check symbol r_index. 2021-10-06 Alan Modra PR28401, invalid section name lookup The PR28401 testcase has a section named "", ie. an empty string. This results in some silly behaviour in load_debug_section, and dump_dwarf_section. Fix that. Note that this patch doesn't correct the main complaint in PR28401, "failed to allocate", since malloc failures on sections having huge bogus sizes are to be expected. We can't safely catch all such cases by comparing with file size, for example, where sections contain compressed data. PR 28401 * objdump.c (load_debug_section): Don't attempt to retrieve empty name sections. (dump_dwarf_section): Likewise. 2021-10-06 GDB Administrator Automatic date update in version.in 2021-10-06 Tom de Vries [gdb/testsuite] Make tui testing less verbose Currently, tui testing is rather verbose. When using these RUNTESTFLAGS to pick up all tui tests (17 in total): ... rtf=$(echo $(cd src/gdb/testsuite/; find gdb.* -type f -name *.exp* \ | xargs grep -l tuiterm_env) ) ... we have: ... $ wc -l gdb.log 120592 gdb.log ... Most of the output is related to controlling the tui screen, but that does not give a top-level sense of how the test-case progresses. Put differently: a lot of bandwith is used to describe how we arrive at a certain tui screen state. But we don't actually always show the state we arrive at, unless there's a FAIL. And if there's say, a PASS that should actually be FAILing, it's hard to detect. Fix this by: - dropping the -log on the call to verbose in _log. We still can get the same info back using runtest -v. - dumping the screen or box that we're checking, also when the test passes. Brings down verbosity to something more reasonable: ... $ wc -l gdb.log 3221 gdb.log ... Tested on x86_64-linux. 2021-10-06 Tom de Vries [gdb/testsuite] Add Term::dump_box in lib/tuiterm.exp Factor out new proc Term::get_region and use it to implement a new proc Term::dump_box, similar to Term::dump_screen. Tested on x86_64-linux. 2021-10-05 Lancelot SIX gdb: Remove deprecated assertion in setting::get The commit 702991711a91bd47b209289562843a11e7009396 (gdb: Have setter and getter callbacks for settings) makes it possible for a setting not to be backed by a memory buffer but use callback functions instead to retrieve or set the setting's value. An assertion was not properly updated to take into account that the m_var member (which points to a memory buffer, if used) might be nullptr if the setting uses callback functions. If the setting is backed by a memory buffer, the m_var has to be non nullptr, which is already checked before the pointer is dereferenced. This commit removes this assertion as it is not valid anymore. 2021-10-05 Tom Tromey Remove 'varsize-limit' This makes the Ada-specific "varsize-limit" a synonym for "max-value-size", and removes the Ada-specific checks of the limit. I am not certain of the history here, but it seems to me that this code is fully obsolete now. And, removing this makes it possible to index large Ada arrays without triggering an error. A new test case is included to demonstrate this. 2021-10-05 Tom Tromey Allow lazy 'zero' value This changes value_zero to create a lazy value. In many cases, value_zero is called in expression evaluation to wrap a type in a non-eval context. It seems senseless to allocate a buffer in these cases. A new 'is_zero' flag is added so we can preserve the existing assertions in value_fetch_lazy. A subsequent patch will add a test where creating a zero value would fail, due to the variable size check. However, the contents of this value are never needed, and so creating a lazy value avoids the error case. 2021-10-05 Tom Tromey Add lval_funcs::is_optimized_out This adds an is_optimized_out function pointer to lval_funcs, and changes value_optimized_out to call it. This new function lets gdb determine if a value is optimized out without necessarily fetching the value. This is needed for a subsequent patch, where an attempt to access a lazy value would fail due to the value size limit -- however, the access was only needed to determine the optimized-out state. 2021-10-05 Tom de Vries [gdb/testsuite] Fix FAIL in gdb.mi/mi-nsmoribund.exp Since commit e36788d1354 "[gdb/testsuite] Fix handling of nr_args < 3 in mi_gdb_test" we run into: ... PASS: gdb.mi/mi-nsmoribund.exp: print done = 1 Expecting: ^(.*[^M ]+)?([^ ]*^M \*running,thread-id="[0-9]+"^M \*running,thread-id="[0-9]+"^M \*running,thread-id="[0-9]+"^M \*running,thread-id="[0-9]+"^M \*running,thread-id="[0-9]+"^M \*running,thread-id="[0-9]+"^M \*running,thread-id="[0-9]+"^M \*running,thread-id="[0-9]+"^M \*running,thread-id="[0-9]+"^M \*running,thread-id="[0-9]+"[^M ]+[(]gdb[)] ^M [ ]*) 103-exec-continue --all^M =library-loaded,id="/lib64/libgcc_s.so.1",target-name="/lib64/libgcc_s.so.1",\ host-name="/lib64/libgcc_s.so.1",symbols-loaded="0",thread-group="i1",\ ranges=[{from="0x00007ffff22a5010",to="0x00007ffff22b6365"}]^M 103^running^M *running,thread-id="5"^M (gdb) ^M FAIL: gdb.mi/mi-nsmoribund.exp: 103-exec-continue --all (unexpected output) ... The regexp expect running messages for all threads, but we only get one for thread 5. The test-case uses non-stop mode, and when the exec-continue --all command is issued, thread 5 is stopped and all other threads are running. Consequently, only thread 5 is resumed, and reported as running. Fix this by updating the regexp. Tested on x86_64-linux. 2021-10-05 Andrew Burgess gdb/python: fix memory leak in python inferior code When a user creates a gdb.Inferior object for the first time a new Python object is created. This object is then cached within GDB's inferior object using the registry mechanism (see inferior_to_inferior_object in py-inferior.c, specifically the calls to inferior_data and set_inferior_data). The Python Reference to the gdb.Inferior object held within the real inferior object ensures that the reference count on the Python gdb.Inferior object never reaches zero while the GDB inferior object continues to exist. At the same time, the gdb.Inferior object maintains a C++ pointer back to GDB's real inferior object. We therefore end up with a system that looks like this: Python Reference | | .----------. | .--------------. | |------------------->| | | inferior | | gdb.Inferior | | |<-------------------| | '----------' | '--------------' | | C++ Pointer When GDB's inferior object is deleted (say the inferior exits) then py_free_inferior is called (thanks to the registry system), this function looks up the Python gdb.Inferior object and sets the C++ pointer to nullptr and finally reduces the reference count on the Python gdb.Inferior object. If at this point the user still holds a reference to the Python gdb.Inferior object then nothing happens. However, the gdb.Inferior object is now in the non-valid state (see infpy_is_valid in py-inferior.c), but otherwise, everything is fine. However, if there are no further references to the Python gdb.Inferior object, or, once the user has given up all their references to the gdb.Inferior object, then infpy_dealloc is called. This function currently checks to see if the inferior pointer within the gdb.Inferior object is nullptr or not. If the pointer is nullptr then infpy_dealloc immediately returns. Only when the inferior point in the gdb.Inferior is not nullptr do we (a) set the gdb.Inferior reference inside GDB's inferior to nullptr, and (b) call the underlying Python tp_free function. There are a number things wrong here: 1. The Python gdb.Inferior reference within GDB's inferior object holds a reference count, thus, setting this reference to nullptr without first decrementing the reference count would leak a reference, however... 2. As GDB's inferior holds a reference then infpy_dealloc will never be called until GDB's inferior object is deleted. Deleting a GDB inferior ohject calls py_free_inferior, and so gives up the reference. At this point there is no longer a need to call set_inferior_data to set the field back to NULL, that field must have been cleared in order to get the reference count to zero, which means... 3. If we know that py_free_inferior must be called before infpy_dealloc, then we know that the inferior pointer in gdb.Inferior will always be nullptr when infpy_dealloc is called, this means that the call to the underlying tp_free function will always be skipped. Skipping this call will cause Python to leak the memory associated with the gdb.Inferior object, which is what we currently always do. Given all of the above, I assert that the C++ pointer within gdb.Inferior will always be nullptr when infpy_dealloc is called. That's what this patch does. I wrote a test for this issue making use of Pythons tracemalloc module, which allows us to spot this memory leak. 2021-10-05 Bhuvanendra Kumar N [gdb/testsuite] Use function_range in gdb.dwarf2/dw2-ref-missing-frame.exp Following 2 test points are failing with clang compiler (gdb) FAIL: gdb.dwarf2/dw2-ref-missing-frame.exp: func_nofb print (gdb) FAIL: gdb.dwarf2/dw2-ref-missing-frame.exp: func_loopfb print As in commit f677852bbda "[gdb/testsuite] Use function_range in gdb.dwarf2/dw2-abs-hi-pc.exp", the problem is that the CU and functions have an empty address range, due to using asm labels in global scope, which is a known source of problems, as explained in the comment of proc function_range in gdb/testsuite/lib/dwarf.exp. Hence fix this also by using function_range. Tested on x86_64-linux with gcc and clang. 2021-10-05 Andrew Burgess gdb/python: add a new gdb_exiting event Add a new event, gdb.events.gdb_exiting, which is called once GDB decides it is going to exit. This event is not triggered in the case that GDB performs a hard abort, for example, when handling an internal error and the user decides to quit the debug session, or if GDB hits an unexpected, fatal, signal. This event is triggered if the user just types 'quit' at the command prompt, or if GDB is run with '-batch' and has processed all of the required commands. The new event type is gdb.GdbExitingEvent, and it has a single attribute exit_code, which is the value that GDB is about to exit with. The event is triggered before GDB starts dismantling any of its own internal state, so, my expectation is that most Python calls should work just fine at this point. When considering this functionality I wondered about using the 'atexit' Python module. However, this is triggered when the Python environment is shut down, which is done from a final cleanup. At this point we don't know for sure what other GDB state has already been cleaned up. 2021-10-05 Andrew Burgess gdb/python: update events test to handle missing exit_code The test gdb.python/py-events.exp sets up a handler for the gdb.exited event. Unfortunately the handler is slightly broken, it assumes that the exit_code attribute will always be present. This is not always the case. In a later commit I am going to add more tests to py-events.exp test script, and in so doing I expose the bug in our handling of gdb.exited events. Just to be clear, GDB itself is fine, it is the test that is not written correctly according to the Python Events API. So, in this commit I fix the Python code in the test, and extend the test case to exercise more paths through the Python code. Additionally, I noticed that the gdb.exited event is used as an example in the documentation for how to write an event handler. Unfortunately the same bug that we had in our test was also present in the example code in the manual. So I've fixed that too. After this commit there is no functional change to GDB. 2021-10-05 GDB Administrator Automatic date update in version.in 2021-10-04 Tom Tromey Use unique_xmalloc_ptr when demangling I noticed that some methods in language_defn could use unique_xmalloc_ptr rather than a plain 'char *'. This patch implements this change, fixing up the fallout and changing gdb_demangle to also return this type. In one spot, std::string is used to simplify some related code, and in another, an auto_obstack is used to avoid manual management. Regression tested on x86-64 Fedora 34. 2021-10-04 Tom Tromey Minor boolean fix in windows-nat.c I noticed a spot in windows-nat.c that used '1' rather than the more appropriate 'true'. This patch fixes it. 2021-10-04 Tom de Vries [gdb/build] Add CXX_DIALECT to CXX Say we use a gcc version that (while supporting c++11) does not support c++11 by default, and needs an -std setting to enable it. If gdb would use the default AX_CXX_COMPILE_STDCXX from autoconf-archive, then we'd have: ... CXX="g++ -std=gnu++11" ... That mechanism however has the following problem (quoting from commit 0bcda685399): ... the top level Makefile passes CXX down to subdirs, and that overrides whatever gdb/Makefile may set CXX to. The result would be that a make invocation from the build/gdb/ directory would use "g++ -std=gnu++11" as expected, while a make invocation at the top level would not. ... Commit 0bcda685399 fixes this by using a custom AX_CXX_COMPILE_STDCXX which does: ... CXX=g++ CXX_DIALECT=-std=gnu++11 ... The problem reported in PR28318 is that using the custom instead of the default AX_CXX_COMPILE_STDCXX makes the configure test for std::thread support fail. We could simply add $CXX_DIALECT to the test for std::thread support, but that would have to be repeated for each added c++ support test. Instead, fix this by doing: ... CXX="g++ -std=gnu++11" CXX_DIALECT=-std=gnu++11 ... This is somewhat awkward, since it results in -std=gnu++11 occuring twice in some situations: ... $ touch src/gdb/dwarf2/read.c $ ( cd build/gdb; make V=1 dwarf2/read.o ) g++-4.8 -std=gnu++11 -x c++ -std=gnu++11 ... ... However, both settings are needed: - the switch in CXX for the std::thread tests (and other tests) - the switch in CXX_DIALECT so it can be appended in Makefiles, to counteract the fact that the top-level Makefile overrides CXX The code added in gdb/ax_cxx_compile_stdcxx.m4 is copied from the default AX_CXX_COMPILE_STDCXX from autoconf-archive. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28318 2021-10-04 Simon Marchi [gdb/symtab] Use unrelocated addresses in call_site Consider test-case gdb.trace/entry-values.exp with target board unix/-fPIE/-pie. Using this command we have an abbreviated version, and can see the correct @entry values for foo: ... $ gdb -q -batch outputs/gdb.trace/entry-values/entry-values \ -ex start \ -ex "break foo" \ -ex "set print entry-values both" \ -ex continue Temporary breakpoint 1 at 0x679 Temporary breakpoint 1, 0x0000555555554679 in main () Breakpoint 2 at 0x55555555463e Breakpoint 2, 0x000055555555463e in foo (i=0, i@entry=2, j=2, j@entry=3) ... Now, let's try the same again, but run directly to foo rather than stopping at main: ... $ gdb -q -batch outputs/gdb.trace/entry-values/entry-values \ -ex "break foo" \ -ex "set print entry-values both" \ -ex run Breakpoint 1 at 0x63e Breakpoint 1, 0x000055555555463e in foo (i=0, i@entry=, \ j=2, j@entry=) ... So, what explains the difference? Noteworthy, this is a dwarf assembly test-case, with debug info for foo and bar, but not for main. In the first case: - we run to main - this does not trigger expanding debug info, because there's none for main - we set a breakpoint at foo - this triggers expanding debug info. Relocated addresses are used in call_site info (because the exec is started) - we continue to foo, and manage to find the call_site info In the second case: - we set a breakpoint at foo - this triggers expanding debug info. Unrelocated addresses are used in call_site info (because the exec is not started) - we run to foo - this triggers objfile_relocate1, but it doesn't update the call_site info addresses - we don't manage to find the call_site info We could fix this by adding the missing call_site relocation in objfile_relocate1. This solution however is counter-trend in the sense that we're trying to work towards the situation where when starting two instances of an executable, we need only one instance of debug information, implying the use of unrelocated addresses. So, fix this instead by using unrelocated addresses in call_site info. Tested on x86_64-linux. This fixes all remaining unix/-fno-PIE/-no-pie vs unix/-fPIE/-pie regressions, like f.i. PR24892. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=24892 Co-Authored-By: Tom de Vries 2021-10-04 Simon Marchi [gdb/symtab] C++-ify call_site - add constructor - add member function call_site::pc () Tested on x86_64-linux. Co-Authored-By: Tom de Vries 2021-10-04 Tom de Vries [gdb/symtab] Add call_site_eq and call_site_hash In commit b4c919f7525 "[gdb/symtab] Fix htab_find_slot call in read_call_site_scope" , I removed the comment: ... It must be the first field as we overload core_addr_hash and core_addr_eq for it. ... for field pc of struct call_site. However, this was not tested, and when indeed moving field pc to the second location, we run into a testsuite failure in gdb.trace/entry-values.exp. This is caused by core_addr_eq (the eq_f function for the htab) being called with a pointer to the pc field (as passed into htab_find_slot) and a pointer to a hash table element. Now that pc is no longer the first field, the pointer to hash table element no longer points to the pc field. This could be fixed by simply reinstating the comment, but we're trying to get rid of this kind of tricks that make refactoring more difficult. Instead, fix this by: - reverting commit b4c919f7525, apart from the comment removal, such that we're passing a pointer to element to htab_find_slot - updating the htab_find_slot call in compunit_symtab::find_call_site in a similar manner - adding a call_site_eq and call_site_hash, and using these in the hash table instead of core_addr_eq and core_addr_hash. Tested on x86_64-linux, both with and without a trigger patch that moves pc to the second location in struct call_site. 2021-10-04 Tom Tromey Fix remote-sim.c compilation The change "make string-like set show commands use std::string variable" caused remote-sim.c to fail to build. The issue is that the code does: const std::string &sysroot = gdb_sysroot; if (is_target_filename (sysroot)) sysroot += strlen (TARGET_SYSROOT_PREFIX); ... which isn't valid. This patch changes this code to use a 'const char *' again, fixing the build. 2021-10-04 Bruno Larsen [gdb/testsuite] update analyze-racy-logs.py to python3 Since python 2 is no longer supported on most distributions, update the script to run under python while while still being runnable under python2. 2021-10-04 Andrew Burgess gdbsupport: remove attempt to define TARGET_WORD_SIZE In the gdbsupport configure.ac file, there is an attempt to define TARGET_WORD_SIZE. This is done by running grep on the file ../bfd/bfd-in3.h. The problem with this is, the file bfd-in3.h is generated into the bfd build directory when bfd is configured, and there is no dependency between the gdbsupport module and the bfd module, so, for example, if I do: $ ../src/configure $ make all-gdbsupport Then bfd will neither be configured, or built. In this case TARGET_WORD_SIZE ends up being defined, but with no value because the grep on bfd-in3.h fails. However, it turns out that this doesn't matter; we don't actually use TARGET_WORD_SIZE anywhere. My proposal in this commit is to just remove the definition of TARGET_WORD_SIZE, the alternative would be to add a dependency between configure-gdbsupport and configure-bfd into Makefile.def, but adding a dependency for something we don't need seems pretty pointless. 2021-10-04 Mike Frysinger sim: add --info-target for listing supported BFD targets It can be difficult to guess the exact bfd name, so add an option to list all the targets that the current build supports. This aligns with other simulator options like --info-architecture. 2021-10-04 GDB Administrator Automatic date update in version.in 2021-10-03 Lancelot SIX gdb: Setting setter return a bool to tell if the value changed GDB can notify observers when a parameter is changed. To do that, do_set_command (in gdb/cli/cli-setshow.c) compares the new value against the old one before updating it, and based on that notifies observers. This looks like something like: int valuechanged = 0; switch (cmd->var.type ()) { case var_integer: { LONGEST new_val = parse_and_eval_long (arg) if (new_val != cmd->var.get ()) { cmd->var.get (new_val); value_changes = 1; } } case var_uinteger: case var_zuinteger: { unsigned int val = parse_cli_var_uinteger (c->var->type (), &arg, true); if (c->var->get () != val) { c->var->set (val); option_changed = true; } } case... /* And so on for all possible var_types. */ } This comparison is done for each possible var_type, which leads to unnecessary logic duplication. In this patch I propose to move all those checks in one place within the setting setter method. This limits the code duplication and simplifies the do_set_command implementation. This patch also changes slightly the way a value change is detected. Instead of comparing the user provided value against the current value of the setting, we compare the value of the setting before and after the set operation. This is meant to handle edge cases where trying to set an unrecognized value would be equivalent to a noop (the actual value remains unchanged). Doing this requires that the original value needs to be copied before the update, which can be non trivial for std::string. There should be no user visible change introduced by this commit. Tested on x86_64 GNU/Linux. [1] https://review.lttng.org/c/binutils-gdb/+/5831/41 Change-Id: If064b9cede3eb56275aacd2b286f74eceb1aed11 2021-10-03 Lancelot SIX Simon Marchi gdb: Have setter and getter callbacks for settings The main motivation behind this improvement is to help the implementation of a patch Simon Marchi is preparing to fix a bug when MI or Python try to access parameters that are inferior dependent (see PR/28085). This commit extends the previous ones, which introduces the setting object to represent a static variable whose value can be set or shown with the appropriate commands. This patch proposes that a setting can either contain a pointer to a static variable holding a setting, or pointers to a pair of setter and getter callback functions. The callbacks functions can be used to retrieve or change the value with custom logic. This is useful when the source of truth for a given setting is not contained in the variable pointed to by the setting instance. Given that the callback function call is hidden within the setting abstraction introduced earlier, none of the sites accessing the setting needs to be updated. The registered getter or setter is used whatever the way to access it is (through MI, Python, Guile, the "with" command and the $_gdb_setting / $_gdb_setting_str convenience functions). All the add_setshow_*_cmd are given a new overload that will accept the pair of function pointers (set / get functions) instead of the pointer to a global variable. Tested on GNU/Linux x86_64 with no regression observed. Change-Id: Ieb81fef57550632ff66e6aa85f637372a226be8c 2021-10-03 Simon Marchi Lancelot SIX gdb: make string-like set show commands use std::string variable String-like settings (var_string, var_filename, var_optional_filename, var_string_noescape) currently take a pointer to a `char *` storage variable (typically global) that holds the setting's value. I'd like to "mordernize" this by changing them to use an std::string for storage. An obvious reason is that string operations on std::string are often easier to write than with C strings. And they avoid having to do any manual memory management. Another interesting reason is that, with `char *`, nullptr and an empty string often both have the same meaning of "no value". String settings are initially nullptr (unless initialized otherwise). But when doing "set foo" (where `foo` is a string setting), the setting now points to an empty string. For example, solib_search_path is nullptr at startup, but points to an empty string after doing "set solib-search-path". This leads to some code that needs to check for both to check for "no value". Or some code that converts back and forth between NULL and "" when getting or setting the value. I find this very error-prone, because it is very easy to forget one or the other. With std::string, we at least know that the variable is not "NULL". There is only one way of representing an empty string setting, that is with an empty string. I was wondering whether the distinction between NULL and "" would be important for some setting, but it doesn't seem so. If that ever happens, it would be more C++-y and self-descriptive to use optional anyway. Actually, there's one spot where this distinction mattered, it's in init_history, for the test gdb.base/gdbinit-history.exp. init_history sets the history filename to the default ".gdb_history" if it sees that the setting was never set - if history_filename is nullptr. If history_filename is an empty string, it means the setting was explicitly cleared, so it leaves it as-is. With the change to std::string, this distinction doesn't exist anymore. This can be fixed by moving the code that chooses a good default value for history_filename to _initialize_top. This is ran before -ex commands are processed, so an -ex command can then clear that value if needed (what gdb.base/gdbinit-history.exp tests). Another small improvement, in my opinion is that we can now easily give string parameters initial values, by simply initializing the global variables, instead of xstrdup-ing it in the _initialize function. In Python and Guile, when registering a string-like parameter, we allocate (with new) an std::string that is owned by the param_smob (in Guile) and the parmpy_object (in Python) objects. This patch started by changing all relevant add_setshow_* commands to take an `std::string *` instead of a `char **` and fixing everything that failed to build. That includes of course all string setting variable and their uses. string_option_def now uses an std::string also, because there's a connection between options and settings (see add_setshow_cmds_for_options). The add_path function in source.c is really complex and twisted, I'd rather not try to change it to work on an std::string right now. Instead, I added an overload that copies the std:string to a `char *` and back. This means more copying, but this is not used in a hot path at all, so I think it is acceptable. Change-Id: I92c50a1bdd8307141cdbacb388248e4e4fc08c93 2021-10-03 Lancelot SIX Simon Marchi gdb: Introduce setting construct within cmd_list_element cmd_list_element can contain a pointer to data that can be set and / or shown. This is achieved with the void* VAR member which points to the data that can be accessed, while the VAR_TYPE member (of type enum var_types) indicates how to interpret the data pointed to. With this pattern, the user of the cmd_list_element needs to know what is the storage type associated with a given VAR_TYPES in order to do the proper casting. No automatic safeguard is available to prevent miss-use of the pointer. Client code typically looks something like: switch (c->var_type) { case var_zuinteger: unsigned int v = *(unsigned int*) c->var; ... break; case var_boolean: bool v = *(bool *) c->var; ... break; ... } This patch proposes to add an abstraction around the var_types and void* pointer pair. The abstraction is meant to prevent the user from having to handle the cast and verify that the data is read or written as a type that is coherent with the setting's var_type. This is achieved by introducing the struct setting which exposes a set of templated get / set member functions. The template parameter is the type of the variable that holds the referred variable. Using those accessors allows runtime checks to be inserted in order to ensure that the data pointed to has the expected type. For example, instantiating the member functions with bool will yield something similar to: const bool &get () const { gdb_assert (m_var_type == var_boolean); gdb_assert (m_var != nullptr); return *static_cast (m_var); } void set (const bool &var) { gdb_assert (m_var_type == var_boolean); gdb_assert (m_var != nullptr); *static_cast (m_var) = var; } Using the new abstraction, our initial example becomes: switch (c->var_type) { case var_zuinteger: unsigned int v = c->var->get (); ... break; case var_boolean: bool v = c->var->get (); ... break; ... } While the call site is still similar, the introduction of runtime checks help ensure correct usage of the data. In order to avoid turning the bulk of add_setshow_cmd_full into a templated function, and following a suggestion from Pedro Alves, a setting can be constructed from a pre validated type erased reference to a variable. This is what setting::erased_args is used for. Introducing an opaque abstraction to describe a setting will also make it possible to use callbacks to retrieve or set the value of the setting on the fly instead of pointing to a static chunk of memory. This will be done added in a later commit. Given that a cmd_list_element may or may not reference a setting, the VAR and VAR_TYPES members of the struct are replaced with a gdb::optional named VAR. Few internal function signatures have been modified to take into account this new abstraction: -The functions value_from_setting, str_value_from_setting and get_setshow_command_value_string used to have a 'cmd_list_element *' parameter but only used it for the VAR and VAR_TYPE member. They now take a 'const setting &' parameter instead. - Similarly, the 'void *' and a 'enum var_types' parameters of pascm_param_value and gdbpy_parameter_value have been replaced with a 'const setting &' parameter. No user visible change is expected after this patch. Tested on GNU/Linux x86_64, with no regression noticed. Change-Id: Ie1d08c3ceb8b30b3d7bf1efe036eb8acffcd2f34 2021-10-03 Mike Frysinger sim: filter out SIGSTKSZ [PR sim/28302] We map target signals to host signals so we can propagate signals between the host & simulated worlds. That means we need to know the symbolic names & values of all signals that might be sent. The tools that generate that list use signal.h and include all symbols that start with "SIG" so as to automatically include any new symbols that the C library might add. Unfortunately, this also picks up "SIGSTKSZ" which is not actually a signal itself, but a signal related setting -- it's the size of the stack when a signal is handled. By itself this doesn't super matter as we will never see a signal with that same value (since the range of valid signals tend to be way less than 1024, and the size of the default signal stack will never be that small). But with recent glibc changes that make this into a dynamic value instead of a compile-time constant, some users see build failures when building the sim. As suggested by Adam Sampson, update our scripts to ignore this symbol to simplify everything and avoid the build failure. Bug: https://sourceware.org/PR28302 2021-10-03 Mike Frysinger sim: ppc: fallback when ln is not available [PR sim/18864] Not all systems have easy access to hard links or symlinks, so add fallback logic to the run->psim build code to handle those. Bug: https://sourceware.org/PR18864 2021-10-03 Lancelot SIX gdb: Fix comment in riscv_scan_prologue I found an inaccurate comment in riscv_scan_prologue. This commit fixes it. 2021-10-03 Lancelot SIX gdb: Support the c.mv insn in the riscv prologue scanner. While working on other problems, I encountered situations where GDB fails to properly unwind the stack because some functions use the C.MV instruction in the prologue. The prologue scanner stops when it hits this instruction assuming its job is done at this point. Unfortunately the prologue is not necessarily finished yet, preventing GDB to properly unwind. This commit adds support for handling such instruction in riscv_scan_prologue. Note that C.MV is part of the compressed instruction set. The MV counterpart from the base ISA is a pseudo instruction that expands to 'ADDI RD,RS1,0' which is already supported. Tested on riscv64-linux-gnu. All feedback are welcome. 2021-10-03 GDB Administrator Automatic date update in version.in 2021-10-02 Simon Marchi [gdb/symtab] Remove COMPUNIT_CALL_SITE_HTAB Remove macro COMPUNIT_CALL_SITE_HTAB, and provide access to the htab using member functions: - compunit_symtab::find_call_site - compunit_symtab::set_call_site_htab Tested on x86_64-linux. Co-Authored-By: Tom de Vries 2021-10-02 Simon Marchi gdb/python: fix a few flake8 warnings Fix these rather obvious warnings reported by flake8: ./lib/gdb/FrameIterator.py:16:1: F401 'gdb' imported but unused ./lib/gdb/FrameIterator.py:17:1: F401 'itertools' imported but unused ./lib/gdb/command/prompt.py:55:26: E712 comparison to False should be 'if cond is False:' or 'if not cond:' ./lib/gdb/command/explore.py:526:9: F841 local variable 'has_explorable_fields' is assigned to but never used ./lib/gdb/command/explore.py:697:56: E712 comparison to False should be 'if cond is False:' or 'if not cond:' ./lib/gdb/command/explore.py:736:62: E712 comparison to False should be 'if cond is False:' or 'if not cond:' ./lib/gdb/command/explore.py:767:61: E712 comparison to False should be 'if cond is False:' or 'if not cond:' ./lib/gdb/command/frame_filters.py:21:1: F401 'copy' imported but unused ./lib/gdb/command/frame_filters.py:22:1: F401 'gdb.FrameIterator.FrameIterator' imported but unused ./lib/gdb/command/frame_filters.py:23:1: F401 'gdb.FrameDecorator.FrameDecorator' imported but unused ./lib/gdb/command/frame_filters.py:25:1: F401 'itertools' imported but unused ./lib/gdb/command/frame_filters.py:179:17: E712 comparison to True should be 'if cond is True:' or 'if cond:' Change-Id: I4f49c0cb430359ee872222600c61d9c5283b09ab 2021-10-02 GDB Administrator Automatic date update in version.in 2021-10-01 Luis Machado Fix build failure for 32-bit targets When building master GDB, I ran into the following: binutils-gdb/gdb/bt-utils.c: In function 'int libbacktrace_print(void*, uintptr_t, const char*, int, const char*)': binutils-gdb/gdb/bt-utils.c:93:44: error: format '%lx' expects argument of type 'long unsigned int', but argument 4 has type 'uintptr_t {aka unsigned int}' [-Werror=format=] snprintf (buf, sizeof (buf), "0x%lx ", pc); Fix this by using %PRIxPTR as opposed to %lx. 2021-10-01 Nick Clifton Fix mistake in RX assembler documentation (special section names) 2021-10-01 Simon Marchi [gdb/symtab] Fix htab_find_slot call in read_call_site_scope In read_call_site_scope we have: ... call_site_local.pc = pc; slot = htab_find_slot (cu->call_site_htab, &call_site_local, INSERT); ... The call passes a call_site pointer as element. OTOH, the hashtab is created using hash_f == core_addr_hash and eq_f == core_addr_eq, so the element will be accessed through a CORE_ADDR pointer. This is not wrong (at least in C), given that pc is the first field in call_site. Nevertheless, as in call_site_for_pc, make the htab_find_slot call match the used hash_f and eq_f by using &pc instead: ... slot = htab_find_slot (cu->call_site_htab, &pc, INSERT); ... Tested on x86_64-linux. Co-Authored-By: Tom de Vries 2021-10-01 Andrea Corallo PATCH bfd: Fix linker warning for recently introduced arm attributes 2021-09-27 Andrea Corallo * elf-bfd.h (NUM_KNOWN_OBJ_ATTRIBUTES): Update value to cover 'Tag_BTI_use' and 'Tag_PACRET_use'. 2021-10-01 Simon Marchi gdb/testsuite/dwarf: use options for rnglists/loclists procs Change how rnglists and loclists procs to align them with how procs for aranges (and other things in the DWARF assembler) work. Instead of using "args" (variable number of parameters in TCL) and command-line style option arguments, use one leading "option" parameters, used as a kind of key/value dictionary of options parsed using `parse_options`. Change-Id: I63e60d17ae16a020ce4d6de44baf3d152ea42a1a 2021-10-01 Simon Marchi gdb/testsuite/dwarf: don't define nested procs for rnglists/loclists When I wrote support for rnglists and loclists in the testsuite's DWARF assembler, I made it with nested procs, for example proc "table" inside proc "rnglists". The intention was that this proc "table" could only be used by the user while inside proc "rnglists"'s body. I had chosen very simple names, thinking there was no chance of name clashes. I recently learned that this is not how TCL works. This ends up defining a proc "table" in the current namespace ("Dwarf" in this case). Things still work if you generate rnglists and loclists in the same file, as each redefines its own procedures when executing. But if a user of the assembler happened to define a convenience "table" or "start_end" procedure, for example, it would get overriden. I'd like to change how this works to reduce the chances of a name clash. - Move the procs out of each other, so they are not defined in a nested fashion. - Prefix them with "_rnglists_" or "_loclists_". - While calling $body in the various procs, temporarily make the procs available under their "short" name. For example, while in rngllists' body, make _rnglists_table available as just "table". This allows existing code to keep working and keeps it not too verbose. - Modify with_override to allow the overriden proc to not exist. In that case, the temporary proc is deleted on exit. Note the non-conforming indentation when calling with_override in _loclists_list. This is on purpose: as we implement more loclists (and rnglists) entry types, the indentation would otherwise get larger and larger without much value for readability. So I think it's reasonable here to put them on the same level. Change-Id: I7bb48d26fcb0dba1ae4dada05c0c837212424328 2021-10-01 Simon Marchi gdb: remove TYPE_FIELD_NAME and FIELD_NAME macros Remove the `TYPE_FIELD_NAME` and `FIELD_NAME` macros, changing all the call sites to use field::name directly. Change-Id: I6900ae4e1ffab1396e24fb3298e94bf123826ca6 2021-10-01 Simon Marchi gdb: add field::name / field::set_name Add the `name` and `set_name` methods on `struct field`, in order to remove `FIELD_NAME` and `TYPE_FIELD_NAME` macros. In this patch, the macros are changed to use `field::name`, so all the call sites that are used to set the field's name are changed to use `field::set_name`. The next patch will remove the macros completely. Note that because of the name clash between the existing field named `name` and the new method, I renamed the field `m_name`. It is not private per-se, because we can't make `struct field` a non-POD yet, but it should be considered private anyway (not accessed outside `struct field`). Change-Id: If16ddbca4e0c39d0ff9da420bb5cdebe5b9b0896 2021-10-01 GDB Administrator Automatic date update in version.in 2021-09-30 Sergio Durigan Junior [PR gdb/28369] Use get_shell on gdb/ser-pipe.c PR gdb/28369 reports that gdb/ser-pipe.c has an 'execl' function call with a hard-coded "/bin/sh" as its argument. We've had 'get_shell' for a while now, which is conscious about the SHELL environment and a better alternative to always calling "/bin/sh". Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28369 2021-09-30 Tom de Vries [gdb/testsuite] Add untested for missing xml support in gdb.base/valgrind*.exp Add untested in case missing xml support is detected in test-cases gdb.base/valgrind*.exp. Tested on x86_64-linux. 2021-09-30 Przemyslaw Wirkus arm: enable Cortex-R52+ CPU Patch is adding Cortex-R52+ as 'cortex-r52plus' command line flag for -mcpu option. bfd/ * cpu-arm.c: New Cortex-R52+ CPU. gas/ * NEWS: Update docs. * config/tc-arm.c: New Cortex-R52+ CPU. * doc/c-arm.texi: Update docs. * testsuite/gas/arm/cpu-cortex-r52plus.d: New test. 2021-09-30 Przemyslaw Wirkus aarch64: Enable Cortex-X2 CPU This patch is adding support for Cortex-X2 CPU. gas: * NEWS: Update docs. * config/tc-aarch64.c: Add Cortex-X2. * doc/c-aarch64.texi: Update docs. 2021-09-30 Przemyslaw Wirkus aarch64: Enable Cortex-A710 CPU This patch is adding support for Cortex-A710 CPU. gas/ * NEWS: Update docs. * config/tc-aarch64.c: Add Cortex-A710. * doc/c-aarch64.texi: Update docs. 2021-09-30 Przemyslaw Wirkus aarch64: Enable Cortex-A510 CPU This patch is adding support for Cortex-A510 CPU. gas/ * NEWS: Update docs. * config/tc-aarch64.c: Add Cortex-A510. * doc/c-aarch64.texi: Update docs. 2021-09-30 Przemyslaw Wirkus aarch64: Update AArch64 features command line options docs 2/2 Patch is only sorting by 'Extension` column 'Architecture Extension' table. gas/ * doc/c-aarch64.texi: Update docs. 2021-09-30 Przemyslaw Wirkus aarch64: Update AArch64 features command line options docs 1/2 Patch is improving entries in "Architecture extensions" table in GAS documentation. gas/ * doc/c-aarch64.texi: Update docs. 2021-09-30 Przemyslaw Wirkus aarch64: add armv9-a architecture to -march Patch is adding new 'armv9-a` command line flag to -march for AArch64. gas/ * config/tc-aarch64.c: Add 'armv9-a' command line flag. * docs/c-aarch64.text: Update docs. * NEWS: Update docs. include/ * opcode/aarch64.h (AARCH64_FEATURE_V9): New define. (AARCH64_ARCH_V9): New define. 2021-09-30 Simon Marchi gdb/testsuite: make runto_main not pass no-message to runto As follow-up to this discussion: https://sourceware.org/pipermail/gdb-patches/2020-August/171385.html ... make runto_main not pass no-message to runto. This means that if we fail to run to main, for some reason, we'll emit a FAIL. This is the behavior we want the majority of (if not all) the time. Without this, we rely on tests logging a failure if runto_main fails, otherwise. They do so in a very inconsisteny mannet, sometimes using "fail", "unsupported" or "untested". The messages also vary widly. This patch removes all these messages as well. Also, remove a few "fail" where we call runto (and not runto_main). by default (without an explicit no-message argument), runto prints a failure already. In two places, gdb.multi/multi-re-run.exp and gdb.python/py-pp-registration.exp, remove "message" passed to runto. This removes a few PASSes that we don't care about (but FAILs will still be printed if we fail to run to where we want to). This aligns their behavior with the rest of the testsuite. Change-Id: Ib763c98c5f4fb6898886b635210d7c34bd4b9023 2021-09-30 Simon Marchi gdbsupport: make gdb_mkostemp_cloexec return a scoped_fd This encourages the callers to use automatic file descriptor management. Change-Id: I137a81df6f3607b457e28c35aafde8ed6f3a3344 2021-09-30 Simon Marchi gdbsupport: make gdb_open_cloexec return scoped_fd Make gdb_open_cloexec return a scoped_fd, to encourage using automatic management of the file descriptor closing. Except in the most trivial cases, I changed the callers to just release the fd, which retains their existing behavior. That will allow the transition to using scoped_fd more to go gradually, one caller at a time. Change-Id: Ife022b403f96e71d5ebb4f1056ef6251b30fe554 2021-09-30 Simon Marchi gdbsupport: move gdb_file_up to its own file The following patches wants to change gdb_fopen_cloexec and gdb_mkostemp_cloexec to return a scoped_fd. Doing this causes a cyclic include between scoped_fd.h and filestuff.h, that both want to include each other. scoped_fd.h includes filestuff.h because of the scoped_fd::to_file method's return value. filestuff.h would then include scoped_fd.h for gdb_fopen_cloexec's and gdb_mkostemp_cloexec's return values. To fix that, move gdb_file_up to its own file, gdb_file.h. Change-Id: Ic82a48914b2aacee8f14af535b7469245f88b93d 2021-09-30 Dimitar Dimitrov ld: pru: Fix resource_table output section alignment My commit 261980de18b added alignment for the resource table symbol. But it is wrong. The Linux remoteproc driver loads and interprets the contents of the .resource_table ELF section, not of a table symbol. Without this patch, if the linker happens to output padding for symbol alignment, then the resource table contents as viewed by the kernel loader would "shift" and look corrupted. ld/ChangeLog: * scripttempl/pru.sc (.resource_table): Align the output section, not the first symbol. 2021-09-30 Tom Tromey Fix Windows crash from stop_pc change The "make thread_suspend_state::stop_pc optional" patch caused a regression on Windows when using shared libraries. I tracked this down to an unguarded use of stop_pc() in the TARGET_WAITKIND_LOADED case of handle_inferior_event. This patch fixes the bug by ensuring that the stop PC is set at this point. 2021-09-30 Tom de Vries [gdb/testsuite] Use untested in gdb.debuginfod/fetch_src_and_symbols.exp With running test-case gdb.debuginfod/fetch_src_and_symbols.exp with target board unix/-bad, I get: ... gcc: error: unrecognized command line option '-bad'^M compiler exited with status 1 gdb compile failed, gcc: error: unrecognized command line option '-bad' FAIL: gdb.debuginfod/fetch_src_and_symbols.exp: compile ... Replace the FAIL with the usual: ... UNTESTED: gdb.debuginfod/fetch_src_and_symbols.exp: failed to compile ... Tested on x86_64-linux. 2021-09-30 Tom de Vries [gdb/testsuite] Remove redundant FAIL in gdb.base/info-os.exp When running test-case gdb.base/info-os.exp with target board unix/-bad, I run into: ... gdb compile failed, gcc: error: unrecognized command line option '-bad' UNTESTED: gdb.base/info-os.exp: failed to prepare FAIL: gdb.base/info-os.exp: cannot compile test program ... Remove the redundant FAIL. Tested on x86_64-linux. 2021-09-30 Tom de Vries [gdb/testsuite] Fix DUPLICATE in gdb.base/info-os.exp When running test-case gdb.base/info-os.exp, I run into: ... PASS: gdb.base/info-os.exp: get threads PASS: gdb.base/info-os.exp: get threads DUPLICATE: gdb.base/info-os.exp: get threads ... Fix this not doing pass followed by exp_continue in gdb_test_multiple. Tested on x86_64-linux. 2021-09-30 Tom de Vries [gdb/testsuite] Check compilation result in gdb.dwarf2/dw2-opt-structptr.exp When running test-case gdb.dwarf2/dw2-opt-structptr.exp with target board unix/-bad, I get: ... gdb compile failed, gcc: error: unrecognized command line option '-bad' UNTESTED: gdb.dwarf2/dw2-opt-structptr.exp: dw2-opt-structptr.exp UNTESTED: gdb.dwarf2/dw2-opt-structptr.exp: failed to compile ERROR: (dw2-opt-structptr) No such file or directory UNRESOLVED: gdb.dwarf2/dw2-opt-structptr.exp: console: set print object on ... Merge the two UNTESTEDs. Fix the UNRESOLVED by checking result of compilation. Tested on x86_64-linux. 2021-09-30 Tom de Vries [gdb/testsuite] Check compilation result in gdb.base/structs.exp When running test-case gdb.base/structs.exp with target board unix/-bad, I get: ... gdb compile failed, gcc: error: unrecognized command line option '-bad' UNTESTED: gdb.base/structs.exp: failed to prepare ERROR: tcl error sourcing src/gdb/testsuite/gdb.base/structs.exp. ERROR: can't read "use_gdb_stub": no such variable ... Fix this by checking the compilation result. Fix the resulting DUPLICATEs using with_test_prefix. Tested on x86_64-linux. 2021-09-30 Tom de Vries [gdb/testsuite] Prepare nodebug exec in gdb.base/cvexpr.exp When running test-case gdb.base/cvexpr.exp with target board unix/-bad, I get: ... gdb compile failed, gcc: error: unrecognized command line option '-bad' ERROR: tcl error sourcing src/gdb/testsuite/gdb.base/cvexpr.exp. ERROR: can't read "use_gdb_stub": no such variable ... This is triggered in a part of the test that claims to require no debug information, but uses the exec containing either dwarf or ctf. Fix this by preparing another executable compiled with nodebug, and using that one instead. Also use with_test_prefix to mark the nodebug part, such that we have: ... gdb compile failed, gcc: error: unrecognized command line option '-bad' UNTESTED: gdb.base/cvexpr.exp: dwarf: failed to prepare gdb compile failed, gcc: error: unrecognized command line option '-bad' UNTESTED: gdb.base/cvexpr.exp: nodebug: failed to prepare ... Tested on x86_64-linux. 2021-09-30 Tom de Vries [gdb/testsuite] Fix DUPLICATE in gdb.base/cvexpr.exp Fix: ... DUPLICATE: gdb.base/cvexpr.exp: ptype int * restrict ... using with_test_prefix. Tested on x86_64-linux. 2021-09-30 Tom de Vries [gdb/testsuite] Check compilation result in gdb.base/call-sc.exp When running test-case gdb.base/call-sc.exp with target board unix/-bad, I get: ... gdb compile failed, gcc: error: unrecognized command line option '-bad' UNTESTED: gdb.base/call-sc.exp: failed to prepare ERROR: tcl error sourcing src/gdb/testsuite/gdb.base/call-sc.exp. ERROR: can't read "use_gdb_stub": no such variable ... Fix this by checking the compilation result. Fix the resulting DUPLICATE: ... DUPLICATE: gdb.base/call-sc.exp: failed to prepare ... using with_test_prefix. Tested on x86_64-linux. 2021-09-30 Tom de Vries [gdb/testsuite] Fix untested messages in gdb.mi/*.exp The effect of: ... untested "y.exp" ... in a gdb.x/y.exp is: ... UNTESTED: gdb.x/y.exp: y.exp ... which is a bit pointless. Replace these untested messages in gdb.mi/*.exp with the usual "failed to compile". Likewise for an: ... untested $testname ... where the variable is undefined. Tested on x86_64-linux. 2021-09-30 Nick Clifton make objcopy fail if it is asked to redefine symbols in an object file containing LTO information. * objcopy.c (filter_symbols): Fail if attempting to dredefine symbols in an LTO object file. 2021-09-30 Tom de Vries [gdb/testsuite] Fix full buffer in gdb.rust/dwindex.exp On ubuntu 18.04.5, I run into: ... (gdb) mt print objfiles dwindex^M ^M Object file build/gdb/testsuite/outputs/gdb.rust/dwindex/dwindex: \ Objfile at 0x55dab0b87a50, bfd at 0x55dab0b0cfa0, 1095 minsyms^M ^M Psymtabs:^M vendor/compiler_builtins/src/int/specialized_div_rem/mod.rs at 0x55dab0db0720^M ... library/std/src/sys/unix/stdio.rs at 0x55dab0d96320^M ERROR: internal buffer is full. UNRESOLVED: gdb.rust/dwindex.exp: check if index present ... Fix this by using -lbl in proc ensure_gdb_index. Tested on x86_64-linux. 2021-09-30 Libor Bukata Add Solaris specific ELF note processing Add elfcore_grok_solaris_note function that enables to obtain process status, register values, and program info from Solaris's core files. bfd/ * elf.c (elfcore_grok_solaris_note): Solaris specific ELF note parser. Better GDB's coredump analysis on Solaris... (elfcore_grok_solaris_note_impl): New function. (elfcore_grok_solaris_prstatus): New function. (elfcore_grok_solaris_info): New function. (elfcore_grok_solaris_lwpstatus): New function. (elf_parse_notes): Added "CORE" groker element. include/ * elf/common.h: Add note segment constants for core files on Solaris systems. 2021-09-30 Frederic Cambus Add support to readelf for reading OpenBSD ELF core notes. * readelf.c (get_openbsd_elfcore_note_type): New function. (process_note): Add support for OpenBSD core notes. 2021-09-30 GDB Administrator Automatic date update in version.in 2021-09-29 Tom de Vries [gdb/testsuite] Fix gdb.base/break-interp.exp for ld.so without debug When running test-case gdb.base/break-interp.exp on openSUSE Leap 42.3, I get: ... (gdb) info addr dl_main^M Symbol "dl_main" is at 0x1750 in a file compiled without debugging.^M (gdb) FAIL: gdb.base/break-interp.exp: info addr dl_main ... while the regexp expects "Symbol \"dl_main\" is a function at address $hex\\." Fix this by also accepting this variant. Tested on x86_64-linux. 2021-09-29 H.J. Lu Add a testcase for PR binutils/27202 PR binutils/27202 * testsuite/gas/elf/dwarf-5-loc0.d: New file. * testsuite/gas/elf/dwarf-5-loc0.s: Likewise. * testsuite/gas/elf/elf.exp: Run dwarf-5-loc0. 2021-09-29 Pedro Alves Fix gdb.multi/multi-term-settings.exp race The gdb.multi/multi-term-settings.exp testcase sometimes fails like so: Running /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.multi/multi-term-settings.exp ... FAIL: gdb.multi/multi-term-settings.exp: inf1_how=attach: inf2_how=attach: stop with control-c (SIGINT) It's easier to reproduce if you stress the machine at the same time, like e.g.: $ stress -c 24 Looking at gdb.log, we see: (gdb) attach 60422 Attaching to program: build/gdb/testsuite/outputs/gdb.multi/multi-term-settings/multi-term-settings, process 60422 [New Thread 60422.60422] Reading symbols from /lib/x86_64-linux-gnu/libc.so.6... Reading symbols from /usr/lib/debug//lib/x86_64-linux-gnu/libc-2.31.so... Reading symbols from /lib64/ld-linux-x86-64.so.2... (No debugging symbols found in /lib64/ld-linux-x86-64.so.2) 0x00007f2fc2485334 in __GI___clock_nanosleep (clock_id=, clock_id@entry =0, flags=flags@entry =0, req=req@entry =0x7ffe23126940, rem=rem@entry =0x0) at ../sysdeps/unix/sysv/linux/clock_nanosleep.c:78 78 ../sysdeps/unix/sysv/linux/clock_nanosleep.c: No such file or directory. (gdb) PASS: gdb.multi/multi-term-settings.exp: inf1_how=attach: inf2_how=attach: inf2: attach set schedule-multiple on (gdb) PASS: gdb.multi/multi-term-settings.exp: inf1_how=attach: inf2_how=attach: set schedule-multiple on info inferiors Num Description Connection Executable 1 process 60404 1 (extended-remote localhost:2349) build/gdb/testsuite/outputs/gdb.multi/multi-term-settings/multi-term-settings * 2 process 60422 1 (extended-remote localhost:2349) build/gdb/testsuite/outputs/gdb.multi/multi-term-settings/multi-term-settings (gdb) PASS: gdb.multi/multi-term-settings.exp: inf1_how=attach: inf2_how=attach: info inferiors pid=60422, count=46 pid=60422, count=47 pid=60422, count=48 pid=60422, count=49 pid=60422, count=50 pid=60422, count=51 pid=60422, count=52 pid=60422, count=53 pid=60422, count=54 pid=60422, count=55 pid=60422, count=56 pid=60422, count=57 pid=60422, count=58 pid=60422, count=59 pid=60422, count=60 pid=60422, count=61 pid=60422, count=62 pid=60422, count=63 pid=60422, count=64 pid=60422, count=65 pid=60422, count=66 pid=60422, count=67 pid=60422, count=68 pid=60422, count=69 pid=60404, count=54 pid=60404, count=55 pid=60404, count=56 pid=60404, count=57 pid=60404, count=58 PASS: gdb.multi/multi-term-settings.exp: inf1_how=attach: inf2_how=attach: continue Quit (gdb) FAIL: gdb.multi/multi-term-settings.exp: inf1_how=attach: inf2_how=attach: stop with control-c (SIGINT) If you look at the testcase's sources, you'll see that the intention is to resumes the program with "continue", wait to see a few of those "pid=..., count=..." lines, and then interrupt the program with Ctrl-C. But somehow, that resulted in GDB printing "Quit", instead of the Ctrl-C stopping the program with SIGINT. Here's what is happening: #1 - those "pid=..., count=..." lines we see above weren't actually output by the inferior after it has been continued (see #1). Note that "inf1_how" and "inf2_how" are "attach". What happened is that those "pid=..., count=..." lines were output by the inferiors _before_ they were attached to. We see them at that point instead of earlier, because that's where the testcase reads from the inferiors' spawn_ids. #2 - The testcase mistakenly thinks those "pid=..., count=..." lines happened after the continue was processed by GDB, meaning it has waited enough, and so sends the Ctrl-C. GDB hasn't yet passed the terminal to the inferior, so the Ctrl-C results in that Quit. The fix here is twofold: #1 - flush inferior output right after attaching #2 - consume the "Continuing" printed by "continue", indicating the inferior has the terminal. This is the same as done throughout the testsuite to handle this exact problem of sending Ctrl-C too soon. gdb/testsuite/ChangeLog: yyyy-mm-dd Pedro Alves > * gdb.multi/multi-term-settings.exp (create_inferior): Flush inferior output. (coretest): Use $gdb_test_name. After issuing "continue", wait for "Continuing". Change-Id: Iba7671dfe1eee6b98d29cfdb05a1b9aa2f9defb9 2021-09-29 Tom de Vries [gdb/testsuite] Disable vgdb tests if xml not supported I build gdb without xml support using --without-expat, and ran into: ... (gdb) target remote | vgdb --wait=2 --max-invoke-ms=2500 --pid=22032^M Remote debugging using | vgdb --wait=2 --max-invoke-ms=2500 --pid=22032^M relaying data between gdb and process 22032^M warning: Can not parse XML target description; XML support was disabled at \ compile time^M ... (gdb) PASS: gdb.base/valgrind-infcall.exp: continue #1 p gdb_test_infcall ()^M Remote 'g' packet reply is too long (expected 560 bytes, got 800 bytes): ...^M (gdb) FAIL: gdb.base/valgrind-infcall.exp: p gdb_test_infcall () ... After googling the error message with context valgrind gdbserver, I found indications that the Remote 'g' packet reply error is due to missing xml support. And here ( https://www.valgrind.org/docs/manual/manual-core-adv.html ) I found: ... GDB version needed for ARM and PPC32/64. You must use a GDB version which is able to read XML target description sent by a gdbserver. This is the standard setup if GDB was configured and built with the "expat" library. If your GDB was not configured with XML support, it will report an error message when using the "target" command. Debugging will not work because GDB will then not be able to fetch the registers from the Valgrind gdbserver. ... So I guess I'm running into the same problem for x86_64. Fix this by skipping all gdb.base/valgrind-*.exp tests if xml support is not available. Although only the gdb.base/valgrind-infcall*.exp produce fails, the Remote 'g' packet reply error occurs in all tests, so it seems prudent to disable them all. Tested on x86_64-linux. 2021-09-29 Tom de Vries [gdb/testsuite] Fix gdb.python/py-breakpoint.exp with python 2 With a gdb build using python 2.7, I run into: ... (gdb) python \ gdb.events.breakpoint_modified.connect(lambda bp: print(bp.enabled))^M File "", line 1^M gdb.events.breakpoint_modified.connect(lambda bp: print(bp.enabled))^M ^^M SyntaxError: invalid syntax^M Error while executing Python code.^M (gdb) FAIL: gdb.python/py-breakpoint.exp: test_bkpt_auto_disable: \ trap breakpoint_modified event ... This is caused by the following: - a lambda function body needs to be an expression - in python 2, print is a statement, while in python 3 it's a function - a function call is an expression, and a statement is not. Fix this by defining a function print_bp_enabled: ... def print_bp_enabled (bp): print (bp.enabled) end ... and using that instead. Tested on x86_64-linux. 2021-09-29 Tom de Vries [gdb/testsuite] Fix breakpoint detection in gdb.gdb/python-helper.exp With a gdb configured to be somewhat minimal, while still supporting python: ... $ gdb --configuration This GDB was configured as follows: configure --host=x86_64-pc-linux-gnu --target=x86_64-pc-linux-gnu --with-auto-load-dir=$debugdir:$datadir/auto-load --with-auto-load-safe-path=$debugdir:$datadir/auto-load --without-expat --with-gdb-datadir=$install/share/gdb (relocatable) --with-jit-reader-dir=$install/lib64/gdb (relocatable) --without-libunwind-ia64 --without-lzma --without-babeltrace --without-intel-pt --with-mpfr --without-xxhash --with-python=/usr --with-python-libdir=/usr/lib --with-debuginfod --without-guile --disable-source-highlight --with-separate-debug-dir=/usr/lib/debug --with-system-gdbinit=$devel/system-gdbinit ... and using gcc 4.8 to build gdb (causing std::thread not to be used due to PR28318) I ran into: ... (gdb) PASS: gdb.gdb/python-helper.exp: start inner gdb print 1^M ^M Breakpoint 2, value_print () at src/gdb/valprint.c:1174^M 1174 scoped_value_mark free_values;^M (xgdb) FAIL: gdb.gdb/python-helper.exp: hit breakpoint in inner gdb (timeout) ... The problem is that the regexp expects "hit Breakpoint $decimal". The "hit" part is missing. The "hit" is printed by maybe_print_thread_hit_breakpoint, when show_thread_that_caused_stop returns true: ... int show_thread_that_caused_stop (void) { return highest_thread_num > 1; } ... Apparently, that's not the case. Fix this by removing "hit" from the regexp, making the regexp more similar to what is used in say, continue_to_breakpoint. Tested on x86_64-linux. 2021-09-29 Andrew Burgess gdb: fix build when libbacktrace and execinfo backtrace are not available In this commit: commit abbbd4a3e0ca51132e7fb31a43f896d29894dae0 Date: Wed Aug 11 13:24:33 2021 +0100 gdb: use libbacktrace to create a better backtrace for fatal signals The build of GDB was broken iff, the execinfo backtrace API is not available, and, libbacktrace is either disabled, or not usable. In this case you'll see build errors like this: CXX bt-utils.o /home/username/src/binutils-gdb/gdb/bt-utils.c: In function 'void gdb_internal_backtrace()': /home/username/src/binutils-gdb/gdb/bt-utils.c:165:5: error: 'gdb_internal_backtrace_1' was not declared in this scope gdb_internal_backtrace_1 (); ^~~~~~~~~~~~~~~~~~~~~~~~ This commit fixes the issue by guarding the call to gdb_internal_backtrace_1 with '#ifdef GDB_PRINT_INTERNAL_BACKTRACE', which is only defined when one of the backtrace libraries are available. 2021-09-29 Andrew Burgess gdb/doc: use 'standard error stream' instead of 'stderr' in some places With this commit: commit 91f2597bd24d171c1337a4629f8237aa47c59082 Date: Thu Aug 12 18:24:59 2021 +0100 gdb: print backtrace for internal error/warning I included some references to 'stderr', which, it was pointed out, would be better written as 'standard error stream'. See: https://sourceware.org/pipermail/gdb-patches/2021-September/182225.html This commit replaces the two instances of 'stderr' that I introduced. 2021-09-29 Andrew Burgess gdb: fix manor -> manner typo in some comments In a recent commit I used 'manor' in some comments rather than 'manner'. This commit fixes those two mistakes. I also looked through the gdb/ tree and found one additional instance of this mistake that this commit also fixes. 2021-09-29 Alan Modra PR27202, readelf -wL doesn't work on ".loc 0" For DWARF revision 4 and earlier, display_debug_lines_decoded populates the file_table array with entries read from .debug_line after the directory table. file_table[0] contains the first entry. DWARF rev 4 line number programs index this entry as file number one. DWARF revision 5 changes .debug_line format quite extensively, and in particular gives file number zero a meaning. PR 27202 * dwarf.c (display_debug_lines_decoded): Correct indexing used for DWARF5 files. 2021-09-29 Simon Marchi gdb: enable target_async around stop_all_threads call in process_initial_stop_replies The following scenario hangs: - maint set target-non-stop on - `gdbserver --attach` - a multi-threaded program For example: Terminal 1: $ gnome-calculator& [1] 495731 $ ../gdbserver/gdbserver --once --attach :1234 495731 Attached; pid = 495731 Listening on port 1234 Terminal 2: $ ./gdb -nx -q --data-directory=data-directory /usr/bin/gnome-calculator -ex "maint set target-non-stop on" -ex "tar rem :1234" Reading symbols from /usr/bin/gnome-calculator... (No debugging symbols found in /usr/bin/gnome-calculator) Remote debugging using :1234 * hangs * What happens is: - The protocol between gdb and gdbserver is in non-stop mode, but the user-visible behavior is all-stop - On connect, gdbserver sends one stop reply for one thread that is stops, the others stay running - In process_initial_stop_replies, gdb calls stop_all_threads to stop these other threads, because we are using the all-stop user-visible mode - stop_all_threads sends a stop request for all the running threads and then waits for resulting events - At this point, the remote target is in target_async(0) mode, which makes stop_all_threads not consider it for events - stop_all_threads loops indefinitely (it does not even block indefinitely, it is in an infinite busy loop) because there are no event sources. wait_one_event returns a TARGET_WAITKIND_NO_RESUMED wait status. Fix that by making the remote target async around the stop_all_threads call. I haven't implemented it because I'm not sure how to do it, but I think it would be a good idea to have, in stop_all_threads / wait_one / handle_one, an assert to check that if we are expecting one or more event, then there are some targets that are in a state where they can supply some events. Otherwise, we'll necessarily be stuck in this infinite loop, and it's probably due to a bug in GDB. I'm not too sure where to put this or how to express it though. Perhaps in stop_all_threads, here: for (int i = 0; i < waits_needed; i++) { wait_one_event event = wait_one (); *here* if (handle_one (event)) break; } If at that point, the returned event is TARGET_WAITKIND_NO_RESUMED, there's a problem. We expect some event, because we've asked some threads to stop, but all targets are answering that they won't have any events for us. That's a contradiction, and a sign that something has gone wrong. It could perhaps event be: gdb_assert (event.ws.kind != TARGET_WAITKIND_NO_RESUMED); in handle_one, as the idea is the same in prepare_for_detach. A bit more sophisticated would be: we know which targets we are expecting waits from, since we know which threads we have asked to stop. So if any of these targets returns TARGET_WAITKIND_NO_RESUMED, something is fishy. Add a test that tests attaching with gdbserver's --attach flag to a multi-threaded program, and then connecting to it. Without the fix, the test reproduces the hang. Change-Id: If6f6690a4887ca66693ef1af64791dda4c65f24f 2021-09-29 GDB Administrator Automatic date update in version.in 2021-09-29 Simon Marchi gdb: fix darwin-nat build (again) I made a mistake in the previous patch. Adjust the format string to match the arguments. Change-Id: I4d45e0e0adb78eb3b5a06ba1a5287155940056ba 2021-09-29 Simon Marchi gdb: fix darwin-nat build There are two errors of this kind: CXX darwin-nat.o /Users/smarchi/src/binutils-gdb/gdb/darwin-nat.c:1175:19: error: format specifies type 'unsigned long' but the argument has type 'ULONGEST' (aka 'unsigned long long') [-Werror,-Wformat] ptid.pid (), ptid.tid ()); ^~~~~~~~~~~ Fix them by using ptid_t's to_string method. Change-Id: I52087d5f7ee0fc01ac8b3f87d4db0217cb0d7cc7 2021-09-29 Simon Marchi gdb.base/foll-fork.exp: accept "info breakpoints" output in any order The test currently requires the "inf 1" breakpoint to be before the "inf 2" breakpoint. This is not always the case: info breakpoints 2 Num Type Disp Enb Address What 2 breakpoint keep y 2.1 y 0x0000555555554730 in callee at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/foll-fork.c:9 inf 2 2.2 y 0x0000555555554730 in callee at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/foll-fork.c:9 inf 1 (gdb) FAIL: gdb.base/foll-fork.exp: follow-fork-mode=parent: detach-on-fork=off: cmd=next 2: test_follow_fork: info breakpoints Since add_location_to_breakpoint uses only the address as a criterion to sort locations, the order of locations at the same address is not stable: it will depend on the insertion order. Here, the insertion order comes from the order of SALs when creating the breakpoint, which can vary from machine to machine. While it would be more user-friendly to have a more stable order for printed breakpoint locations, it doesn't really matter for this test, and it would be hard to define an order that will be the same everywhere, all the time. So, loosen the regexp to accept "inf 1" and "inf 2" in any order. Co-Authored-By: Pedro Alves Change-Id: I5ada2e0c6ad0669e0d161bfb6b767229c0970d16 2021-09-28 Cooper Qu RISC-V: Fix wrong version number when arch contains 'p'. When specify a default version for p extension in riscv_supported_std_ext[](elfxx-riscv.c) and assembling with -march=rv32imacp, the c extension's version in attribute will become 0p0, the expectation is 2p0. TODO: Remember to add testcase when we have supported standrad p in the future. bfd/ PR gas/28372 * elfxx-riscv.c (riscv_parsing_subset_version): Break if p represent the 'p' extension. Change-Id: Ia4e0cf26f3d7d07acaee8cefd86707ecac663a59 2021-09-28 Nelson Chu RISC-V: Allow to add numbers in the prefixed extension names. We need to allow adding numbers in the prefixed extension names, since the zve<32,64> extensions are included in the forzen rvv v1.0 spec recently. But there are two restrictions as follows, * The extension name ends with p is invalid, since this may be confused with extension with .0 version. We report errors for this case. Invalid format: [z|h|s|zvm|x][0-9a-z]+[0-9]+p * The extension name ends with numbers is valid, but the numbers will be parsed as major version, so try to avoid naming extensions like this. bfd/ * elfxx-riscv.c (riscv_recognized_prefixed_ext): Renamed from riscv_valid_prefixed_ext/ (riscv_parsing_subset_version): The extensions end with p is forbidden, we already report the detailed errors in the riscv_parse_prefixed_ext, so clean the code and unused parameters. (riscv_parse_std_ext): Updated. (riscv_parse_prefixed_ext): Rewrite the parser to allow numbers in the prefixed extension names. gas/ * testsuite/gas/riscv/march-fail-invalid-x-01.d: New testcases. * testsuite/gas/riscv/march-fail-invalid-x-02.d: Likewise. * testsuite/gas/riscv/march-fail-invalid-z-01.d: Likewise. * testsuite/gas/riscv/march-fail-invalid-z-02.d: Likewise. * testsuite/gas/riscv/march-fail-invalid.l: Likewise. * testsuite/gas/riscv/march-fail-version-x.d: Removed. * testsuite/gas/riscv/march-fail-version-z.d: Likewise. * testsuite/gas/riscv/march-fail-version.l: Likewise. 2021-09-28 Andrew Burgess gdb: print backtrace for internal error/warning This commit builds on previous work to allow GDB to print a backtrace of itself when GDB encounters an internal-error or internal-warning. This fixes PR gdb/26377. There's not many places where we call internal_warning, and I guess in most cases the user would probably continue their debug session. And so, in order to avoid cluttering up the output, by default, printing of a backtrace is off for internal-warnings. In contrast, printing of a backtrace is on by default for internal-errors, as I figure that in most cases hitting an internal-error is going to be the end of the debug session. Whether a backtrace is printed or not can be controlled with the new settings: maintenance set internal-error backtrace on|off maintenance show internal-error backtrace maintenance set internal-warning backtrace on|off maintenance show internal-warning backtrace Here is an example of what an internal-error now looks like with the backtrace included: (gdb) maintenance internal-error blah ../../src.dev-3/gdb/maint.c:82: internal-error: blah A problem internal to GDB has been detected, further debugging may prove unreliable. ----- Backtrace ----- 0x5c61ca gdb_internal_backtrace_1 ../../src.dev-3/gdb/bt-utils.c:123 0x5c626d _Z22gdb_internal_backtracev ../../src.dev-3/gdb/bt-utils.c:165 0xe33237 internal_vproblem ../../src.dev-3/gdb/utils.c:393 0xe33539 _Z15internal_verrorPKciS0_P13__va_list_tag ../../src.dev-3/gdb/utils.c:470 0x1549652 _Z14internal_errorPKciS0_z ../../src.dev-3/gdbsupport/errors.cc:55 0x9c7982 maintenance_internal_error ../../src.dev-3/gdb/maint.c:82 0x636f57 do_simple_func ../../src.dev-3/gdb/cli/cli-decode.c:97 .... snip, lots more backtrace lines .... --------------------- ../../src.dev-3/gdb/maint.c:82: internal-error: blah A problem internal to GDB has been detected, further debugging may prove unreliable. Quit this debugging session? (y or n) y This is a bug, please report it. For instructions, see: . ../../src.dev-3/gdb/maint.c:82: internal-error: blah A problem internal to GDB has been detected, further debugging may prove unreliable. Create a core file of GDB? (y or n) n My hope is that this backtrace might make it slightly easier to diagnose GDB issues if all that is provided is the console output, I find that we frequently get reports of an assert being hit that is located in pretty generic code (frame.c, value.c, etc) and it is not always obvious how we might have arrived at the assert. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26377 2021-09-28 Andrew Burgess gdb: use libbacktrace to create a better backtrace for fatal signals GDB recently gained the ability to print a backtrace when a fatal signal is encountered. This backtrace is produced using the backtrace and backtrace_symbols_fd API available in glibc. However, in order for this API to actually map addresses to symbol names it is required that the application (GDB) be compiled with -rdynamic, which GDB is not by default. As a result, the backtrace produced often looks like this: Fatal signal: Bus error ----- Backtrace ----- ./gdb/gdb[0x80ec00] ./gdb/gdb[0x80ed56] /lib64/libc.so.6(+0x3c6b0)[0x7fc2ce1936b0] /lib64/libc.so.6(__poll+0x4f)[0x7fc2ce24da5f] ./gdb/gdb[0x15495ba] ./gdb/gdb[0x15489b8] ./gdb/gdb[0x9b794d] ./gdb/gdb[0x9b7a6d] ./gdb/gdb[0x9b943b] ./gdb/gdb[0x9b94a1] ./gdb/gdb[0x4175dd] /lib64/libc.so.6(__libc_start_main+0xf3)[0x7fc2ce17e1a3] ./gdb/gdb[0x4174de] --------------------- This is OK if you have access to the exact same build of GDB, you can manually map the addresses back to symbols, however, it is next to useless if all you have is a backtrace copied into a bug report. GCC uses libbacktrace for printing a backtrace when it encounters an error. In recent commits I added this library into the binutils-gdb repository, and in this commit I allow this library to be used by GDB. Now (when GDB is compiled with debug information) the backtrace looks like this: ----- Backtrace ----- 0x80ee08 gdb_internal_backtrace ../../src/gdb/event-top.c:989 0x80ef0b handle_fatal_signal ../../src/gdb/event-top.c:1036 0x7f24539dd6af ??? 0x7f2453a97a5f ??? 0x154976f gdb_wait_for_event ../../src/gdbsupport/event-loop.cc:613 0x1548b6d _Z16gdb_do_one_eventv ../../src/gdbsupport/event-loop.cc:237 0x9b7b02 start_event_loop ../../src/gdb/main.c:421 0x9b7c22 captured_command_loop ../../src/gdb/main.c:481 0x9b95f0 captured_main ../../src/gdb/main.c:1353 0x9b9656 _Z8gdb_mainP18captured_main_args ../../src/gdb/main.c:1368 0x4175ec main ../../src/gdb/gdb.c:32 --------------------- Which seems much more useful. Use of libbacktrace is optional. If GDB is configured with --disable-libbacktrace then the libbacktrace directory will not be built, and GDB will not try to use this library. In this case GDB would try to use the old backtrace and backtrace_symbols_fd API. All of the functions related to writing the backtrace of GDB itself have been moved into the new files gdb/by-utils.{c,h}. 2021-09-28 Andrew Burgess src-release.sh: add libbacktrace to GDB_SUPPORT_DIRS After the previous commit that imported libbacktrace from gcc, this commit updates src-release.sh so that the libbacktrace directory is included in the gdb release tar file. ChangeLog: * src-release.sh (GDB_SUPPPORT_DIRS): Add libbacktrace. 2021-09-28 Andrew Burgess Copy in libbacktrace from gcc This copies in libbacktrace from the gcc repository as it was in the commit 62e420293a293608f383d9b9c7f2debd666e9fc9. GDB is going to start using this library soon. A dependency between GDB and libbacktrace has already been added to the top level Makefile, so, after this commit, when building GDB, libbacktrace will be built first. However, libbacktrace is not yet linked into GDB, or used by GDB in any way. It is possible to stop libbacktrace being built by configuring the tree with --disable-libbacktrace. This commit does NOT update src-release.sh, that will be done in the next commit, this commit ONLY imports libbacktrace from gcc. This means that if you try to make a release of GDB from exactly this commit then the release tar file will not include libbacktrace. However, as libbacktrace is an optional dependency this is fine. 2021-09-28 Andrew Burgess gdb: Add a dependency between gdb and libbacktrace GDB is going to start using libbacktrace, so add a build dependency. ChangeLog: * Makefile.def: Add all-gdb dependency on all-libbacktrace. * Makefile.in: Regenerate. 2021-09-28 Andrew Burgess top-level configure: setup target_configdirs based on repository The top-level configure script is shared between the gcc repository and the binutils-gdb repository. The target_configdirs variable in the configure.ac script, defines sub-directories that contain components that should be built for the target using the target tools. Some components, e.g. zlib, are built as both host and target libraries. This causes problems for binutils-gdb. If we run 'make all' in the binutils-gdb repository we end up trying to build a target version of the zlib library, which requires the target compiler be available. Often the target compiler isn't immediately available, and so the build fails. The problem with zlib impacted a previous attempt to synchronise the top-level configure scripts from gcc to binutils-gdb, see this thread: https://sourceware.org/pipermail/binutils/2019-May/107094.html And I'm in the process of importing libbacktrace in to binutils-gdb, which is also a host and target library, and triggers the same issues. I believe that for binutils-gdb, at least at the moment, there are no target libraries that we need to build. In the configure script we build three lists of things we want to build, $configdirs, $build_configdirs, and $target_configdirs, we also build two lists of things we don't want to build, $skipdirs and $noconfigdirs. We then remove anything that is in the lists of things not to build, from the list of things that should be built. My proposal is to add everything in target_configdirs into skipdirs, if the source tree doesn't contain a gcc/ sub-directory. The result is that for binutils-gdb no target tools or libraries will be built, while for the gcc repository, nothing should change. If a user builds a unified source tree, then the target tools and libraries should still be built as the gcc/ directory will be present. I've tested a build of gcc on x86-64, and the same set of target libraries still seem to get built. On binutils-gdb this change resolves the issues with 'make all'. ChangeLog: * configure: Regenerate. * configure.ac (skipdirs): Add the contents of target_configdirs if we are not building gcc. 2021-09-28 Gleb Fotengauer-Malinovskiy PR28391, strip/objcopy --preserve-dates *.a: cannot set time After commit 985e0264516 copy_archive function began to pass invalid values to the utimensat(2) function when it tries to preserve timestamps in ar archives. This happens because the bfd_stat_arch_elt implementation for ar archives fills only the st_mtim.tv_sec part of the st_mtim timespec structure, but leaves the st_mtim.tv_nsec part and the whole st_atim timespec untouched leaving them uninitialized PR 28391 * ar.c (extract_file): Clear buf for preserve_dates. * objcopy.c (copy_archive): Likewise. 2021-09-28 Mike Frysinger sim: drop weak func attrs on module inits When I first wrote this, I was thinking we'd scan all source files that existed and generate a complete init list. That means for any particular build, we'd probably have a few functions that didn't exist, so weak attributes was necessary. What I ended up scanning though was only the source files that went into a particular build. There was another concern too: a source file might be included, but the build settings would cause all of its contents to be skipped (via CPP defines). So scanning via naive grep would pick up names not actually available. A check of the source tree shows that we never do this, and it's pretty easy to institute a policy that we don't start (by at the very least including a stub init func). The use of weak symbols ends up causing a problem in practice: for a few modules (like profiling), nothing else pulls it in, so the linker omits it entirely, which leads to the profiling module never being available. So drop the weak markings since we know all these funcs will be available. 2021-09-28 Cui,Lili x86: Print {bad} on invalid broadcast in OP_E_memory Don't print broadcast for scalar_mode, and print {bad} for invalid broadcast. gas/ PR binutils/28381 * testsuite/gas/i386/bad-bcast.s: Add a new testcase. * testsuite/gas/i386/bad-bcast.d: Likewise. * testsuite/gas/i386/bad-bcast-intel.d: New. opcodes/ PR binutils/28381 * i386-dis.c (static struct): Add no_broadcast. (OP_E_memory): Mark invalid broadcast with no_broadcast=1 and Print "{bad}"for it. (intel_operand_size): mark invalid broadcast with no_broadcast=1. (OP_XMM): Mark scalar_mode with no_broadcast=1. 2021-09-28 Simon Marchi gdb: use intrusive_list for linux-nat lwp_list Replace the manually maintained linked list of lwp_info objects with intrusive_list. Replace the ALL_LWPS macro with all_lwps, which returns a range. Add all_lwps_safe as well, for use in iterate_over_lwps, which currently iterates in a safe manner. Change-Id: I355313502510acc0103f5eaf2fbde80897d6376c 2021-09-28 Simon Marchi gdb: add destructor to lwp_info Replace the lwp_free function with a destructor. Make lwp_info non-copyable, since there is now a destructor (we wouldn't want an lwp_info object getting copied and this->arch_private getting deleted twice). Change-Id: I09fcbe967e362566d3a06fed2abca2a9955570fa 2021-09-28 Simon Marchi gdb: make lwp_info non-POD Initialize all fields in the class declaration directly. This opens the door to using intrusive_list, done in the following patch. Change-Id: I38bb27410cd9ebf511d310bb86fe2ea1872c3b05 2021-09-28 GDB Administrator Automatic date update in version.in 2021-09-27 Simon Marchi gdb: don't share aspace/pspace on fork with "detach-on-fork on" and "follow-fork-mode child" We found that when handling forks, two inferiors can unexpectedly share their program space and address space. To reproduce: 1. Using a test program that forks... 2. "set follow-fork-mode child" 3. "set detach-on-fork on" (the default) 4. run to a breakpoint somewhere after the fork Step 4 should have created a new inferior: (gdb) info inferiors Num Description Connection Executable 1 /home/smarchi/build/wt/amd/gdb/fork * 2 process 251425 1 (native) /home/smarchi/build/wt/amd/gdb/fork By inspecting the state of GDB, we can see that the two inferiors now share one program space and one address space: Inferior 1: (top-gdb) p inferior_list.m_front.num $2 = 1 (top-gdb) p inferior_list.m_front.aspace $3 = (struct address_space *) 0x5595e2520400 (top-gdb) p inferior_list.m_front.pspace $4 = (struct program_space *) 0x5595e2520440 Inferior 2: (top-gdb) p inferior_list.m_front.next.num $5 = 2 (top-gdb) p inferior_list.m_front.next.aspace $6 = (struct address_space *) 0x5595e2520400 (top-gdb) p inferior_list.m_front.next.pspace $7 = (struct program_space *) 0x5595e2520440 You can then run inferior 1 again and the two inferiors will still erroneously share their spaces, but already at this point this is wrong. The cause of the bad {a,p}space sharing is in follow_fork_inferior. When following the child and detaching from the parent, we just re-use the parent's spaces, rather than cloning them. When we switch back to inferior 1 and run again, we find ourselves with two unrelated inferiors sharing spaces. Fix that by creating new spaces for the parent after having moved them to the child. My initial implementation created new spaces for the child instead. Doing this breaks doing "next" over fork(). When "next" start, we record the symtab of the starting location. When the program stops, we compare that symtab with the symtab the program has stopped at. If the symtab or the line number has changed, we conclude the "next" is done. If we create a new program space for the child and copy the parent's program space to it with clone_program_space, it creates new symtabs for the child as well. When the child stop, but still on the fork() line, GDB thinks the "next" is done because the symtab pointers no longer match. In reality they are two symtab instances that represent the same file. But moving the spaces to the child and creating new spaces for the parent, we avoid this problem. Note that the problem described above happens today with "detach-on-fork off" and "follow-fork-mode child", because we create new spaces for the child. This will have to be addressed later. Test-wise, improve gdb.base/foll-fork.exp to set a breakpoint that is expected to have a location in each inferiors. Without the fix, when the two inferiors erroneously share a program space, GDB reports a single location. Change-Id: Ifea76e14f87b9f7321fc3a766217061190e71c6e 2021-09-27 Simon Marchi gdb.base/foll-fork.exp: use foreach_with_prefix to handle prefixes No behavior change in the test expected, other than in the test names. Change-Id: I111137483858ab0f23138439f2930009779a2b3d 2021-09-27 Simon Marchi gdb.base/foll-fork.exp: rename variables Rename the variables / parameters used to match the corresponding GDB setting name, I find that easier to follow. Change-Id: Idcbddbbb369279fcf1e808b11a8c478f21b2a946 2021-09-27 Simon Marchi gdb.base/foll-fork.exp: refactor to restart GDB between each portion of the test This test is difficult to follow and modify because the state of GDB is preserved some tests. Add a setup proc, which starts a new GDB and runs to main, and use it in all test procs. Use proc_with_prefix to avoid duplicates. The check_fork_catchpoints proc also seems used to check for follow-fork support by checking if catchpoints are supported. If they are not, it uses "return -code return", which makes its caller return. I find this unnecessary complex, versus just returning a boolean. Modify it to do so. Change-Id: I23e62b204286c5e9c5c86d2727f7d33fb126ed08 2021-09-27 Simon Marchi gdb.base/foll-fork.exp: remove gating based on target triplet It looks like this test has some code to check at runtime the support of fork handling of the target (see check_fork_catchpoints). So, it seems to me that the check based on target triplet at the beginning of the test is not needed. This kind of gating is generally not desirable, because we wouldn't think of updating it when adding fork support to a target. For example, FreeBSD supports fork, but it wasn't listed here. Change-Id: I6b55f2298edae6b37c3681fb8633d8ea1b5aabee 2021-09-27 Simon Marchi gdb.base/foll-fork.exp: remove DUPLICATEs Remove DUPLICATEs, and and at the same time replace two uses of gdb_test_multiple with gdb_test. I don't think using gdb_test_multiple is necessary here. Change-Id: I8dcf097c3364e92d4f0e11f0c0f05dbb88e86742 2021-09-27 Nick Alcock libctf, lookup: fix bounds of pptrtab lookup An off-by-one bug in the check for pptrtab lookup meant that we could access the pptrtab past its bounds (*well* past its bounds), particularly if we called ctf_lookup_by_name in a child dict with "*foo" where "foo" is a type that exists in the parent but not the child and no previous lookups by name have been carried out. (Note that "*foo" is not even a valid thing to call ctf_lookup_by_name with: foo * is. Nonetheless, users sometimes do call ctf_lookup_by_name with invalid content, and it should return ECTF_NOTYPE, not crash.) ctf_pptrtab_len, as its name suggests (and as other tests of it in ctf-lookup.c confirm), is one higher than the maximum valid permissible index, so the comparison is wrong. (Test added, which should fail pretty reliably in the presence of this bug on any machine with 4KiB pages.) libctf/ChangeLog 2021-09-27 Nick Alcock * ctf-lookup.c (ctf_lookup_by_name_internal): Fix pptrtab bounds. * testsuite/libctf-writable/pptrtab-writable-page-deep-lookup.*: New test. 2021-09-27 Nick Alcock libctf, testsuite: fix various warnings in tests These warnings are all off by default, but if they do fire you get spurious ERRORs when running make check-libctf. libctf/ChangeLog 2021-09-27 Nick Alcock * testsuite/libctf-lookup/enum-symbol.c: Remove unused label. * testsuite/libctf-lookup/conflicting-type-syms.c: Remove unused variables. * testsuite/libctf-regression/pptrtab.c: Likewise. * testsuite/libctf-regression/type-add-unnamed-struct.c: Likewise. * testsuite/libctf-writable/pptrtab.c: Likewise. * testsuite/libctf-writable/reserialize-strtab-corruption.c: Likewise. * testsuite/libctf-regression/nonstatic-var-section-ld-r.c: Fix format string. * testsuite/libctf-regression/nonstatic-var-section-ld.c: Likewise. * testsuite/libctf-regression/nonstatic-var-section-ld.lk: Adjust. * testsuite/libctf-writable/symtypetab-nonlinker-writeout.c: Fix initializer. 2021-09-27 Nick Alcock libctf: fix handling of CTF symtypetab sections emitted by older GCC Older (pre-upstreaming) GCC emits a function symtypetab section of a format never read by any extant libctf. We can detect such CTF dicts by the lack of the CTF_F_NEWFUNCINFO flag in their header, and we do so when reading in the symtypetab section -- but if the set of symbols with types is sufficiently sparse, even an older GCC will emit a function index section. In NEWFUNCINFO-capable compilers, this section will always be the exact same length as the corresponding function section (each is an array of uint32_t, associated 1:1 with each other). But this is not true for the older compiler, for which the sections are different lengths. We check to see if the function symtypetab section and its index are the same length, but we fail to skip this check when this is not a NEWFUNCINFO dict, and emit a spurious corruption error for a CTF dict we could have perfectly well opened and used. Fix trivial: check the flag (and fix the terrible grammar of the error message at the same time). libctf/ChangeLog 2021-09-27 Nick Alcock * ctf-open.c (ctf_bufopen_internal): Don't complain about corrupt function index symtypetab sections if this is an old-format function symtypetab section (which should be ignored in any case). Fix bad grammar. 2021-09-27 Nick Alcock configure: regenerate in all projects that use libtool.m4 (including sim/, which has no changelog.) bfd/ChangeLog 2021-09-27 Nick Alcock * configure: Regenerate. binutils/ChangeLog 2021-09-27 Nick Alcock * configure: Regenerate. gas/ChangeLog 2021-09-27 Nick Alcock * configure: Regenerate. gprof/ChangeLog 2021-09-27 Nick Alcock * configure: Regenerate. ld/ChangeLog 2021-09-27 Nick Alcock * configure: Regenerate. libctf/ChangeLog 2021-09-27 Nick Alcock * configure: Regenerate. * Makefile.in: Regenerate. opcodes/ChangeLog 2021-09-27 Nick Alcock * configure: Regenerate. zlib/ChangeLog 2021-09-27 Nick Alcock * configure: Regenerate. 2021-09-27 Nick Alcock libctf: try several possibilities for linker versioning flags Checking for linker versioning by just grepping ld --help output for mentions of --version-script is inadequate now that Solaris 11.4 implements a --version-script with different semantics. Try linking a test program with a small wildcard-using version script with each supported set of flags in turn, to make sure that linker versioning is not only advertised but actually works. The Solaris "GNU-compatible" linker versioning is not quite GNU-compatible enough, but we can work around the differences by generating a new version script that removes the comments from the original (Solaris ld requires #-style comments), and making another version script for libctf-nonbfd in particular which doesn't mention any of the symbols that appear in libctf.la, to avoid Solaris ld introducing corresponding new NOTYPE symbols to match the version script. libctf/ChangeLog 2021-09-27 Nick Alcock PR libctf/27967 * configure.ac (VERSION_FLAGS): Replace with... (ac_cv_libctf_version_script): ... this multiple test. (VERSION_FLAGS_NOBFD): Substitute this too. * Makefile.am (libctf_nobfd_la_LDFLAGS): Use it. Split out... (libctf_ldflags_nover): ... non-versioning flags here. (libctf_la_LDFLAGS): Use it. * libctf.ver: Give every symbol not in libctf-nobfd a comment on the same line noting as much. 2021-09-27 Nick Alcock libtool.m4: fix nm BSD flag detection Libtool needs to get BSD-format (or MS-format) output out of the system nm, so that it can scan generated object files for symbol names for -export-symbols-regex support. Some nms need specific flags to turn on BSD-formatted output, so libtool checks for this in its AC_PATH_NM. Unfortunately the code to do this has a pair of interlocking flaws: - it runs the test by doing an nm of /dev/null. Some platforms reasonably refuse to do an nm on a device file, but before now this has only been worked around by assuming that the error message has a specific textual form emitted by Tru64 nm, and that getting this error means this is Tru64 nm and that nm -B would work to produce BSD-format output, even though the test never actually got anything but an error message out of nm -B. This is fixable by nm'ing *nm itself* (since we necessarily have a path to it). - the test is entirely skipped if NM is set in the environment, on the grounds that the user has overridden the test: but the user cannot reasonably be expected to know that libtool wants not only nm but also flags forcing BSD-format output. Worse yet, one such "user" is the top-level Cygnus configure script, which neither tests for nor specifies any BSD-format flags. So platforms needing BSD-format flags always fail to set them when run in a Cygnus tree, breaking -export-symbols-regex on such platforms. Libtool also needs to augment $LD on some platforms, but this is done unconditionally, augmenting whatever the user specified: the nm check should do the same. One wrinkle: if the user has overridden $NM, a path might have been provided: so we use the user-specified path if there was one, and otherwise do the path search as usual. (If the nm specified doesn't work, this might lead to a few extra pointless path searches -- but the test is going to fail anyway, so that's not a problem.) (Tested with NM unset, and set to nm, /usr/bin/nm, my-nm where my-nm is a symlink to /usr/bin/nm on the PATH, and /not-on-the-path/my-nm where *that* is a symlink to /usr/bin/nm.) ChangeLog 2021-09-27 Nick Alcock PR libctf/27967 * libtool.m4 (LT_PATH_NM): Try BSDization flags with a user-provided NM, if there is one. Run nm on itself, not on /dev/null, to avoid errors from nms that refuse to work on non-regular files. Remove other workarounds for this problem. Strip out blank lines from the nm output. 2021-09-27 Nick Alcock libtool.m4: augment symcode for Solaris 11 This reports common symbols like GNU nm, via a type code of 'C'. ChangeLog 2021-09-27 Nick Alcock PR libctf/27967 * libtool.m4 (lt_cv_sys_global_symbol_pipe): Augment symcode for Solaris 11. 2021-09-27 Nick Alcock libctf: link against libiberty before linking in libbfd or libctf-nobfd This ensures that the CTF_LIBADD, which always contains at least this when doing a shared link: -L`pwd`/../libiberty/pic -liberty appears in the link line before any requirements pulled in by libbfd.la, which include -liberty but because it is install-time do not include the -L`pwd`/../libiberty/pic portion (in an indirect dep like this, the path comes from the libbfd.la file, and is an install path). libiberty also appears after libbfd in the link line by virtue of libctf-nobfd.la, because libctf-nobfd has to follow libbfd in the link line, and that needs symbols from libiberty too. Without this, an installed liberty might well be pulled in by libbfd, and if --enable-install-libiberty is not specified this libiberty might be completely incompatible with what is being installed and break either or boht of libbfd and libctf. (The specific problem observed here is that bsearch_r was not present, but other problems might easily be observed in future too.) Because ld links against libctf, this has a tendency to break the system linker at install time too, if installing with --prefix=/usr. That's quite unpleasant to recover from. libctf/ChangeLog 2021-09-27 Nick Alcock PR libctf/27360 * Makefile.am (libctf_la_LIBADD): Link against libiberty before pulling in libbfd.la or pulling in libctf-nobfd.la. * Makefile.in: Regenerate. 2021-09-27 Tom de Vries [gdb/build] Fix build with g++-4.8 When building g++-4.8, we run into: ... src/gdb/dwarf2/read.c:919:5: error: multiple fields in union \ 'partial_die_info::' initialized ... This is due to: ... union { struct { CORE_ADDR lowpc = 0; CORE_ADDR highpc = 0; }; ULONGEST ranges_offset; }; ... The error looks incorrect, given that only one union member is initialized, and does not reproduce with newer g++. Nevertheless, work around this by moving the initialization to a constructor. [ I considered just removing the initialization, with the idea that access should be guarded by has_pc_info, but I ran into one failure in the testsuite, for gdb.base/check-psymtab.exp due to add_partial_symbol using lowpc without checking has_pc_info. ] Tested on x86_64-linux. 2021-09-27 Andrew Burgess gdb: add setting to disable reading source code files In some situations it is possible that a user might not want GDB to try and access source code files, for example, the source code might be stored on a slow to access network file system. It is almost certainly possible that using some combination of 'set directories' and/or 'set substitute-path' a user can trick GDB into being unable to find the source files, but this feels like a rather crude way to solve the problem. In this commit a new option is add that stops GDB from opening and reading the source files. A user can run with source code reading disabled if this is required, then re-enable later if they decide that they now want to view the source code. 2021-09-27 Andrew Burgess gdb: remove duplicate cmd_list_element declarations For some reason we have two locations where cmd_list_elements are declared, cli/cli-cmds.h and gdbcmd.h. Worse still there is duplication between these two locations. In this commit I have moved all of the cmd_list_element declarations from gdbcmd.h into cli/cli-cmds.h and removed the duplicates. There should be no user visible changes after this commit. 2021-09-27 Andrew Burgess gdb: prevent an assertion when computing the frame_id for an inline frame I ran into this assertion while GDB was trying to unwind the stack: gdb/inline-frame.c:173: internal-error: void inline_frame_this_id(frame_info*, void**, frame_id*): Assertion `frame_id_p (*this_id)' failed. That is, when building the frame_id for an inline frame, GDB asks for the frame_id of the previous frame. Unfortunately, no valid frame_id was returned for the previous frame, and so the assertion triggers. What is happening is this, I had a stack that looked something like this (the arrows '->' point from caller to callee): normal_frame -> inline_frame However, for whatever reason (e.g. broken debug information, or corrupted stack contents in the inferior), when GDB tries to unwind "normal_frame", it ends up getting back effectively the same frame, thus the call stack looks like this to GDB: .-> normal_frame -> inline_frame | | '-----' Given such a situation we would expect GDB to terminate the stack with an error like this: Backtrace stopped: previous frame identical to this frame (corrupt stack?) However, the inline_frame causes a problem, and here's why: When unwinding we start from the sentinel frame and call get_prev_frame. We eventually end up in get_prev_frame_if_no_cycle, in here we create a raw frame, and as this is frame #0 we immediately return. However, eventually we will try to unwind the stack further. When we do this we inevitably needing to know the frame_id for frame #0, and so, eventually, we end up in compute_frame_id. In compute_frame_id we first find the right unwinder for this frame, in our case (i.e. for inline_frame) the $pc is within the function normal_frame, but also within a block associated with the inlined function inline_frame, as such the inline frame unwinder claims this frame. Back in compute_frame_id we next compute the frame_id, for our inline_frame this means a call to inline_frame_this_id. The ID of an inline frame is based on the id of the previous frame, so from inline_frame_this_id we call get_prev_frame_always, this eventually calls get_prev_frame_if_no_cycle again, which creates another raw frame and calls compute_frame_id (for frames other than frame 0 we immediately compute the frame_id). In compute_frame_id we again identify the correct unwinder for this frame. Our $pc is unchanged, however, the fact that the next frame is of type INLINE_FRAME prevents the inline frame unwinder from claiming this frame again, and so, the standard DWARF frame unwinder claims normal_frame. We return to compute_frame_id and call the standard DWARF function to build the frame_id for normal_frame. With the frame_id of normal_frame figured out we return to compute_frame_id, and then to get_prev_frame_if_no_cycle, where we add the ID for normal_frame into the frame_id cache, and return the frame back to inline_frame_this_id. From inline_frame_this_id we build a frame_id for inline_frame and return to compute_frame_id, and then to get_prev_frame_if_no_cycle, which adds the frame_id for inline_frame into the frame_id cache. So far, so good. However, as we are trying to unwind the complete stack, we eventually ask for the previous frame of normal_frame, remember, at this point GDB doesn't know the stack is corrupted (with a cycle), GDB still needs to figure that out. So, we eventually end up in get_prev_frame_if_no_cycle where we create a raw frame and call compute_frame_id, remember, this is for the frame before normal_frame. The first task for compute_frame_id is to find the unwinder for this frame, so all of the frame sniffers are tried in order, this includes the inline frame sniffer. The inline frame sniffer asks for the $pc, this request is sent up the stack to normal_frame, which, due to its cyclic behaviour, tells GDB that the $pc in the previous frame was the same as the $pc in normal_frame. GDB spots that this $pc corresponds to both the function normal_frame and also the inline function inline_frame. As the next frame is not an INLINE_FRAME then GDB figures that we have not yet built a frame to cover inline_frame, and so the inline sniffer claims this new frame. Our stack is now looking like this: inline_frame -> normal_frame -> inline_frame But, we have not yet computed the frame id for the outer most (on the left) inline_frame. After the frame sniffer has claimed the inline frame GDB returns to compute_frame_id and calls inline_frame_this_id. In here GDB calls get_prev_frame_always, which eventually ends up in get_prev_frame_if_no_cycle again, where we create a raw frame and call compute_frame_id. Just like before, compute_frame_id tries to find an unwinder for this new frame, it sees that the $pc is within both normal_frame and inline_frame, but the next frame is, again, an INLINE_FRAME, so, just like before the standard DWARF unwinder claims this frame. Back in compute_frame_id we again call the standard DWARF function to build the frame_id for this new copy of normal_frame. At this point the stack looks like this: normal_frame -> inline_frame -> normal_frame -> inline_frame After compute_frame_id we return to get_prev_frame_if_no_cycle, where we try to add the frame_id for the new normal_frame into the frame_id cache, however, unlike before, we fail to add this frame_id as it is a duplicate of the previous normal_frame frame_id. Having found a duplicate get_prev_frame_if_no_cycle unlinks the new frame from the stack, and returns nullptr, the stack now looks like this: inline_frame -> normal_frame -> inline_frame The nullptr result from get_prev_frame_if_no_cycle is fed back to inline_frame_this_id, which forwards this to get_frame_id, which immediately returns null_frame_id. As null_frame_id is not considered a valid frame_id, this is what triggers the assertion. In summary then: - inline_frame_this_id currently assumes that as the inline frame exists, we will always get a valid frame back from get_prev_frame_always, - get_prev_frame_if_no_cycle currently assumes that it is safe to return nullptr when it sees a cycle. Notice that in frame.c:compute_frame_id, this code: fi->this_id.value = outer_frame_id; fi->unwind->this_id (fi, &fi->prologue_cache, &fi->this_id.value); gdb_assert (frame_id_p (fi->this_id.value)); The assertion makes it clear that the this_id function must always return a valid frame_id (e.g. null_frame_id is not a valid return value), and similarly in inline_frame.c:inline_frame_this_id this code: *this_id = get_frame_id (get_prev_frame_always (this_frame)); /* snip comment */ gdb_assert (frame_id_p (*this_id)); Makes it clear that every inline frame expects to be able to get a previous frame, which will have a valid frame_id. As I have discussed above, these assumptions don't currently hold in all cases. One possibility would be to move the call to get_prev_frame_always forward from inline_frame_this_id to inline_frame_sniffer, however, this falls foul of (in frame.c:frame_cleanup_after_sniffer) this assertion: /* No sniffer should extend the frame chain; sniff based on what is already certain. */ gdb_assert (!frame->prev_p); This assert prohibits any sniffer from trying to get the previous frame, as getting the previous frame is likely to depend on the next frame, I can understand why this assertion is a good thing, and I'm in no rush to alter this rule. The solution proposed here takes onboard feedback from both Pedro, and Simon (see the links below). The get_prev_frame_if_no_cycle function is renamed to get_prev_frame_maybe_check_cycle, and will now not do cycle detection for inline frames, even when we spot a duplicate frame it is still returned. This is fine, as, if the normal frame has a duplicate frame-id then the inline frame will also have a duplicate frame-id. And so, when we reject the inline frame, the duplicate normal frame, which is previous to the inline frame, will also be rejected. In inline-frame.c the call to get_prev_frame_always is no longer nested inside the call to get_frame_id. There are reasons why get_prev_frame_always can return nullptr, for example, if there is a memory error while trying to get the previous frame, if this should happen then we now give a more informative error message. Historical Links: Patch v2: https://sourceware.org/pipermail/gdb-patches/2021-June/180208.html Feedback: https://sourceware.org/pipermail/gdb-patches/2021-July/180651.html https://sourceware.org/pipermail/gdb-patches/2021-July/180663.html Patch v3: https://sourceware.org/pipermail/gdb-patches/2021-July/181029.html Feedback: https://sourceware.org/pipermail/gdb-patches/2021-July/181035.html Additional input: https://sourceware.org/pipermail/gdb-patches/2021-September/182040.html 2021-09-27 Tom de Vries [gdb/testsuite] Fix gdb.base/dcache-flush.exp When running test-case gdb.base/dcache-flush.exp on ubuntu 18.04.5, I run into: ... (gdb) PASS: gdb.base/dcache-flush.exp: p var2 info dcache^M Dcache 4096 lines of 64 bytes each.^M Contains data for Thread 0x7ffff7fc6b80 (LWP 3551)^M Line 0: address 0x7fffffffd4c0 [47 hits]^M Line 1: address 0x7fffffffd500 [31 hits]^M Line 2: address 0x7fffffffd5c0 [7 hits]^M Cache state: 3 active lines, 85 hits^M (gdb) FAIL: gdb.base/dcache-flush.exp: check dcache before flushing ... The regexp expects "Contains data for process $decimal". This is another case of thread_db_target::pid_to_str being used. Fix this by updating the regexp. Tested on x86_64-linux. 2021-09-27 Tom de Vries [gdb/testsuite] Test sw watchpoint in gdb.threads/process-dies-while-detaching.exp The test-case gdb.threads/process-dies-while-detaching.exp takes about 20s when using hw watchpoints, but when forcing sw watchpoints (using the patch mentioned in PR28375#c0), the test-case takes instead 3m14s. Also, it show a FAIL: ... (gdb) continue^M Continuing.^M Cannot find user-level thread for LWP 10324: generic error^M (gdb) FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: watchpoint: continue ... for which PR28375 was filed. Modify the test-case to: - add the hw/sw axis to the watchpoint testing, to ensure that we observe the sw watchpoint behaviour also on can-use-hw-watchpoints architectures. - skip the hw breakpoint testing if not supported - set the sw watchpoint later to avoid making the test too slow. This still triggers the same PR, but now takes just 24s. This patch adds a KFAIL for PR28375. Tested on x86_64-linux. 2021-09-27 Simon Marchi gdb: fix indentation in gdbtypes.c Change-Id: I7bfbb9d349a1f474256800c45e28fe3b1de08771 2021-09-27 GDB Administrator Automatic date update in version.in 2021-09-26 GDB Administrator Automatic date update in version.in 2021-09-26 Peter Bergner PowerPC: Enable mfppr mfppr32, mtppr and mtppr32 extended mnemonics on POWER5 SPR 896 and the mfppr mfppr32, mtppr and mtppr32 extended mnemonics were added in ISA 2.03, so enable them on POWER5 and later. opcodes/ * ppc-opc.c (powerpc_opcodes) : Enable on POWER5 and later. gas/ * testsuite/gas/ppc/power5.s: New test. * testsuite/gas/ppc/power5.d: Likewise. * testsuite/gas/ppc/ppc.exp: Run it. * testsuite/gas/ppc/power7.s: Remove tests for mfppr, mfppr32, mtppr and mtppr32. * testsuite/gas/ppc/power7.d: Likewise. 2021-09-25 Tom de Vries [gdb/testsuite] Minimize gdb restarts Minimize gdb restarts, applying the following rules: - don't use prepare_for_testing unless necessary - don't use clean_restart unless necessary Also, if possible, replace build_for_executable + clean_restart with prepare_for_testing for brevity. Touches 68 test-cases. Tested on x86_64-linux. 2021-09-25 Alan Modra PR28346, segfault attempting to disassemble raw binary Don't attempt to access elf_section_data for non-ELF sections. PR 28346 * elf32-xtensa.c (xtensa_read_table_entries): Return zero entries for non-ELF. 2021-09-25 GDB Administrator Automatic date update in version.in 2021-09-24 Hans-Peter Nilsson gas/testsuite/ld-elf/dwarf2-21.d: Pass -W Required for the expected "CU:" to be emitted for long source-paths. See binutils/dwarf.c: if (do_wide || strlen (directory) < 76) printf (_("CU: %s/%s:\n"), directory, file_table[0].name); else printf ("%s:\n", file_table[0].name); See also commit 5f410aa50ce2c, "testsuite/ld-elf/pr26936.d: Pass -W." gas/ChangeLog: * testsuite/ld-elf/dwarf2-21.d: Pass -W. 2021-09-24 Simon Marchi gdb: change thread_info::name to unique_xmalloc_ptr, add helper function This started out as changing thread_info::name to a unique_xmalloc_ptr. That showed that almost all users of that field had the same logic to get a thread's name: use thread_info::name if non-nullptr, else ask the target. Factor out this logic in a new thread_name free function. Make the field private (rename to m_name) and add some accessors. Change-Id: Iebdd95f4cd21fbefc505249bd1d05befc466a2fc 2021-09-24 Tom Tromey Move value_true to value.h I noticed that value_true is declared in language.h and defined in language.c. However, as part of the value API, I think it would be better in one of those files. And, because it is very short, I changed it to be an inline function in value.h. I've also removed a comment from the implementation, on the basis that it seems obsolete -- if the change it suggests was needed, it probably would have been done by now; and if it is needed in the future, odds are it would be done differently anyway. Finally, this patch also changes value_true and value_logical_not to return a bool, and updates some uses. 2021-09-24 Pedro Alves Make dcache multi-target-safe By inspection, I noticed that this code in dcache.c is not multi-target-aware: /* If this is a different inferior from what we've recorded, flush the cache. */ if (inferior_ptid != dcache->ptid) This doesn't take into account that threads of different targets may have the same ptid. Fixed by also storing/comparing the process_stratum_target. Tested on x86-64-linux-gnu, native and gdbserver. Change-Id: I4d9d74052c696b72d28cb1c77b697b911725c8d3 2021-09-24 Pedro Alves Fix 'FAIL: gdb.perf/disassemble.exp: python Disassemble().run()' We currently have one FAIL while running "make check-perf": PerfTest::assemble, run ... python Disassemble().run() Traceback (most recent call last): File "", line 1, in File "/home/pedro/rocm/gdb/src/gdb/testsuite/gdb.perf/lib/perftest/perftest.py", line 64, in run self.warm_up() File "", line 25, in warm_up gdb.error: No symbol "ada_evaluate_subexp" in current context. Error while executing Python code. (gdb) FAIL: gdb.perf/disassemble.exp: python Disassemble().run() ... The gdb.perf/disassemble.exp testcase debugs GDB with itself, runs to main, and then disassembles a few GDB functions. The problem is that most(!) functions it is trying to disassemble are now gone... This commit fixes the issue by simply picking some other functions to disassemble. It would perhaps be better to come up with some test program to disassemble, one that would stay the same throughout the years, instead of disassembling GDB itself. I don't know why that wasn't done to begin with. I'll have to leave that for another rainy day, though. gdb/testsuite/ yyyy-mm-dd Pedro Alves * gdb.perf/disassemble.py (Disassemble::warm_up): Disassemble evaluate_subexp_do_call instead of ada_evaluate_subexp. (Disassemble::warm_up): Disassemble "captured_main", "run_inferior_call" and "update_global_location_list" instead of "evaluate_subexp_standard" and "c_parse_internal". Change-Id: I89d1cca89ce2e495dea5096e439685739cc0d3df 2021-09-24 Pedro Alves Fix all PATH problems in testsuite/gdb.perf/ Currently "make check-perf" triggers ~40 PATH messages in gdb.sum: ... PATH: gdb.perf/backtrace.exp: python sys.path.insert(0, os.path.abspath("/home/pedro/rocm/gdb/build/gdb/../../src/gdb/testsuite/gdb.perf/lib")) PATH: gdb.perf/backtrace.exp: python exec (open ('/home/pedro/rocm/gdb/build/gdb/testsuite/outputs/gdb.perf/backtrace/backtrace.py').read ()) ... This commit fixes them. E.g. before/after gdb.sum diff: -PASS: gdb.perf/backtrace.exp: python import os, sys -PASS: gdb.perf/backtrace.exp: python sys.path.insert(0, os.path.abspath("/home/pedro/rocm/gdb/build-master/gdb/../../src/gdb/testsuite/gdb.perf/lib")) -PATH: gdb.perf/backtrace.exp: python sys.path.insert(0, os.path.abspath("/home/pedro/rocm/gdb/build-master/gdb/../../src/gdb/testsuite/gdb.perf/lib")) -PASS: gdb.perf/backtrace.exp: python exec (open ('/home/pedro/rocm/gdb/build-master/gdb/testsuite/outputs/gdb.perf/backtrace/backtrace.py').read ()) -PATH: gdb.perf/backtrace.exp: python exec (open ('/home/pedro/rocm/gdb/build-master/gdb/testsuite/outputs/gdb.perf/backtrace/backtrace.py').read ()) +PASS: gdb.perf/backtrace.exp: setup perftest: python import os, sys +PASS: gdb.perf/backtrace.exp: setup perftest: python sys.path.insert(0, os.path.abspath("${srcdir}/gdb.perf/lib")) +PASS: gdb.perf/backtrace.exp: setup perftest: python exec (open ('${srcdir}/gdb.perf/backtrace.py').read ()) gdb/testsuite/ yyyy-mm-dd Pedro Alves * lib/perftest.exp (PerfTest::_setup_perftest): Use with_test_prefix. Add explicit test names to python invocations, with "$srcdir" not expanded. Change-Id: I50a31b04b7abdea754139509e4a34ae9263118a4 2021-09-24 Pedro Alves Fix all DUPLICATE problems in testsuite/gdb.perf/ Currently running "make check-perf" shows: ... # of duplicate test names 6008 ... All those duplicate test names come from gdb.perf/skip-command.exp. This commit fixes them, using with_test_prefix. gdb/testsuite/ yyyy-mm-dd Pedro Alves * gdb.perf/skip-command.exp (run_skip_bench): Wrap each for iteration in with_test_prefix. Change-Id: I38501cf70bc6b60306ee7228996ee7bcd858dc1b 2021-09-24 Tom Tromey Fix handling of DW_AT_data_bit_offset A newer version of GCC will now emit member locations using just DW_AT_data_bit_offset, like: <3><14fe>: Abbrev Number: 1 (DW_TAG_member) <14ff> DW_AT_name : (indirect string, offset: 0x215e): nb_bytes <1503> DW_AT_decl_file : 1 <1503> DW_AT_decl_line : 10 <1504> DW_AT_decl_column : 7 <1505> DW_AT_type : <0x150b> <1509> DW_AT_bit_size : 31 <150a> DW_AT_data_bit_offset: 64 whereas earlier versions would emit something like: <3><164f>: Abbrev Number: 7 (DW_TAG_member) <1650> DW_AT_name : (indirect string, offset: 0x218d): nb_bytes <1654> DW_AT_decl_file : 1 <1655> DW_AT_decl_line : 10 <1656> DW_AT_decl_column : 7 <1657> DW_AT_type : <0x165f> <165b> DW_AT_byte_size : 4 <165c> DW_AT_bit_size : 31 <165d> DW_AT_bit_offset : 1 <165e> DW_AT_data_member_location: 8 That is, DW_AT_data_member_location is not emitted any more. This is a change due to the switch to DWARF 5 by default. This change pointed out an existing bug in gdb, namely that the attr_to_dynamic_prop depends on the presence of DW_AT_data_member_location. This patch moves the handling of DW_AT_data_bit_offset into handle_data_member_location, and updates attr_to_dynamic_prop to handle this new case. A new test case is included. This test fails with GCC 11, but passes with an earlier version of GCC. 2021-09-24 Tom de Vries [gdb/testsuite] Don't leave gdb instance running after function_range A typical dwarf assembly test-case start like this: ... standard_testfile .c -debug.S set asm_file [standard_output_file $srcfile2] Dwarf::assemble $asm_file { ... } if { [prepare_for_testing "failed to prepare" ${testfile} \ [list $srcfile $asm_file] {nodebug}] } { return -1 } ... When accidentally using build_for_executable instead of prepare_for_testing (or intentionally using it but forgetting to add clean_restart $binfile or some such) the mistake may not be caught, because another gdb instance is still running, and we may silently end up testing compiler-generated DWARF. This can be caused by something relatively obvious, like an earlier prepare_for_testing or clean_restart, but also by something more obscure like function_range, which may even be triggered by dwarf assembly like this: ... {MACRO_AT_func {main}} ... Fix this by calling gdb_exit at the end of function_range. Also fix the fallout of that in test-case gdb.dwarf2/dw2-bad-elf.exp, where a get_sizeof call used the gdb instance left lingering by function_range. [ A better and more complete fix would add a new proc get_exec_info, that would be called at the start of the dwarf assembly body: ... Dwarf::assemble $asm_file { get_exec_info {main foo} {int void*} ... that would: - do a prepare_for_testing with $srcfile (roughtly equivalent to what MACRO_AT_func does, - call function_range for all functions main and foo, without starting a new gdb instance - set corresponding variables at the call-site: main_start, main_len, main_end, foo_start, foo_len, foo_end. - get size for types int and void* - set corresponding variables at the call-site: int_size, void_ptr_size. - do a gdb_exit. ] Tested on x86_64-linux. 2021-09-24 Tom de Vries [gdb/testsuite] Use pie instead of -fpie/-pie I noticed two test-cases where -fpie is used. Using the canonical pie option will usually get one -fPIE instead. That choice is justified here in gdb_compile: ... # For safety, use fPIE rather than fpie. On AArch64, m68k, PowerPC # and SPARC, fpie can cause compile errors due to the GOT exceeding # a maximum size. On other architectures the two flags are # identical (see the GCC manual). Note Debian9 and Ubuntu16.10 # onwards default GCC to using fPIE. If you do require fpie, then # it can be set using the pie_flag. set flag "additional_flags=-fPIE" ... There is no indication that using -fpie rather than -fPIE is on purpose, so use pie instead. Tested on x86_64-linux. 2021-09-24 Tom de Vries [gdb/testsuite] Factor out dump_info in gdb.testsuite/dump-system-info.exp Factor out new proc dump_info in test-case gdb.testsuite/dump-system-info.exp, and in the process: - fix a few typos - remove unnecessary "test -r /proc/cpuinfo" Tested on x86_64-linux. Co-Authored-By: Pedro Alves 2021-09-24 Pedro Alves gdb/testsuite: Make it possible to use TCL variables in DWARF assembler loclists It is currently not possible to use variables in locations lists. For example, with: diff --git a/gdb/testsuite/gdb.dwarf2/loclists-multiple-cus.exp b/gdb/testsuite/gdb.dwarf2/loclists-multiple-cus.exp index 6b4f5c8cbb8..cdbf948619f 100644 --- a/gdb/testsuite/gdb.dwarf2/loclists-multiple-cus.exp +++ b/gdb/testsuite/gdb.dwarf2/loclists-multiple-cus.exp @@ -30,6 +30,8 @@ if {![dwarf2_support]} { return 0 } +set myconst 0x123456 + # Test with 32-bit and 64-bit DWARF. foreach_with_prefix is_64 {false true} { if { $is_64 } { @@ -49,6 +51,7 @@ foreach_with_prefix is_64 {false true} { global func1_addr func1_len global func2_addr func2_len global is_64 + global myconst # The CU uses the DW_FORM_loclistx form to refer to the .debug_loclists # section. @@ -107,7 +110,7 @@ foreach_with_prefix is_64 {false true} { list_ { # When in func1. start_length $func1_addr $func1_len { - DW_OP_constu 0x123456 + DW_OP_constu $myconst DW_OP_stack_value } we get: $ make check TESTS="*/loclists-multiple-cus.exp" ... gdb compile failed, build/gdb/testsuite/outputs/gdb.dwarf2/loclists-multiple-cus/loclists-multiple-cus-dw32.S: Assembler messages: build/gdb/testsuite/outputs/gdb.dwarf2/loclists-multiple-cus/loclists-multiple-cus-dw32.S:78: Error: leb128 operand is an undefined symbol: $myconst ... That means $myconst was copied literally to the generated assembly file. This patch fixes it, by running subst on the location list body, in the context of the caller. The fix is applied to both Dwarf::loclists::table::list_::start_length and Dwarf::loclists::table::list_::start_end. Reported-by: Zoran Zaric Change-Id: I615a64431857242d9f477d5699e3732df1b31322 2021-09-24 Tom de Vries [gdb/testsuite] Fix DUPLICATEs in gdb.dwarf2/implptr-64bit.exp When running test-case gdb.dwarf2/implptr-64bit.exp with target board unix/-m32, I noticed: ... DUPLICATE: gdb.dwarf2/implptr-64bit.exp: failed to prepare ... Fix this by using with_test_prefix. Tested on x86_64-linux. 2021-09-24 Tom de Vries [gdb/testsuite] Fix DUPLICATEs gdb.dwarf2/dw2-is-stmt.exp Fix these DUPLICATEs by using with_test_prefix: ... DUPLICATE: gdb.dwarf2/dw2-is-stmt.exp: ensure we saw a valid line pattern, 1 DUPLICATE: gdb.dwarf2/dw2-is-stmt.exp: ensure we saw a valid line pattern, 2 ... Tested on x86_64-linux. 2021-09-24 Tom de Vries [gdb/testsuite] Fix set $var val in gdb.dwarf2/dw2-is-stmt.exp When doing a testrun with: ... $ make check RUNTESTFLAGS=$(cd $src/gdb/testsuite/; echo gdb.dwarf2/*.exp) ... I ran into: ... ERROR: tcl error sourcing gdb.dwarf2/dw2-is-stmt.exp. ERROR: expected integer but got "dw2-abs-hi-pc-world.c" while executing "incr i" ... The variable i is set in gdb.dwarf2/dw2-abs-hi-pc.exp, and leaks to gdb.dwarf2/dw2-is-stmt.exp. It's not removed by gdb_cleanup_globals because i is set as global variable by runtest.exp, which does: ... for { set i 0 } { $i < $argc } { incr i } { ... at toplevel but forgets to unset the variable. Fix this by removing '$' in front of the variable name when doing set: ... -set $i 0 +set i 0 ... Tested on x86_64-linux. 2021-09-24 Tom de Vries [gdb/testsuite] Fix DUPLICATE in gdb.base/load-command.exp Fix this duplicate: ... DUPLICATE: gdb.base/load-command.exp: check initial value of the_variable ... by using with_test_prefix. Tested on x86_64-linux. 2021-09-24 Tom de Vries [gdb/testsuite] Use pie/nopie instead of ldflags=-pie/-no-pie I noticed two test-case that use ldflags=-pie and ldflags-no-pie, instead of the canonical pie and nopie options, which would typically also add additional_flags=-fPIE respectively additional_flags=-fno-pie. There is no indication that this is on purpose, so replace these with pie and nopie. Tested on x86_64-linux. 2021-09-24 Tom de Vries [gdb/testsuite] Add gdb.testsuite/dump-system-info.exp When interpreting the testsuite results, it's often relevant what kind of machine the testsuite ran on. On a local machine one can just do /proc/cpuinfo, but in case of running tests using a remote system that distributes test runs to other remote systems that are not directly accessible, that's not possible. Fix this by dumping /proc/cpuinfo into the gdb.log, as well as lsb_release -a and uname -a. We could do this at the start of each test run, by putting it into unix.exp or some such. However, this might be too verbose, so we choose to put it into its own test-case, such that it get triggered in a full testrun, but not when running one or a subset of tests. We put the test-case into the gdb.testsuite directory, which is currently the only place in the testsuite where we do not test gdb. [ Though perhaps this could be put into a new gdb.info directory, since the test-case doesn't actually test the testsuite. ] Tested on x86_64-linux. 2021-09-24 GDB Administrator Automatic date update in version.in 2021-09-23 Tom Tromey Change pointer_type to a method of struct type I noticed that pointer_type is declared in language.h and defined in language.c. However, it really has to do with types, so it should have been in gdbtypes.h all along. This patch changes it to be a method on struct type. And, I went through uses of TYPE_IS_REFERENCE and updated many spots to use the new method as well. (I didn't update ones that were in arch-specific code, as I couldn't readily test that.) 2021-09-23 Tom de Vries [gdb/testsuite] Support -fPIE/-fno-PIE/-pie/-no-pie in gdb_compile_rust When running gdb.rust/*.exp test-cases with target board unix/-fPIE/-pie, I run into: ... builtin_spawn -ignore SIGHUP rustc --color never gdb.rust/watch.rs \ -g -lm -fPIE -pie -o outputs/gdb.rust/watch/watch^M error: Unrecognized option: 'f'^M ^M compiler exited with status 1 ... The problem is that -fPIE and -fpie are gcc options, but for rust we use rustc, which has different compilation options. Fix this by translating the gcc options to rustc options in gdb_compile_rust, similar to how that is done for ada in target_compile_ada_from_dir. Likewise for unix/-fno-PIE/-no-pie. Tested on x86_64-linux, with: - native - unix/-fPIE/-pie - unix/-fno-PIE/-no-pie specifically, on openSUSE Leap 15.2 both with package gcc-PIE: - installed (making gcc default to PIE) - uninstalled (making gcc default to non-PIE). and rustc 1.52.1. 2021-09-23 Tom de Vries [gdb/testsuite] Use pie instead of -fPIE -pie Replace {additional_flags=-fPIE ldflags=-pie} with {pie}. This makes sure that the test-cases properly error out when using target board unix/-fno-PIE/-no-pie. Tested on x86_64-linux. 2021-09-23 Tom de Vries [gdb/testsuite] Fix probe test in gdb.base/break-interp.exp When running test-case gdb.base/break-interp.exp on ubuntu 18.04.5, we have: ... (gdb) bt^M #0 0x00007eff7ad5ae12 in ?? () from break-interp-LDprelinkNOdebugNO^M #1 0x00007eff7ad71f50 in ?? () from break-interp-LDprelinkNOdebugNO^M #2 0x00007eff7ad59128 in ?? () from break-interp-LDprelinkNOdebugNO^M #3 0x00007eff7ad58098 in ?? () from break-interp-LDprelinkNOdebugNO^M #4 0x0000000000000002 in ?? ()^M #5 0x00007fff505d7a32 in ?? ()^M #6 0x00007fff505d7a94 in ?? ()^M #7 0x0000000000000000 in ?? ()^M (gdb) FAIL: gdb.base/break-interp.exp: ldprelink=NO: ldsepdebug=NO: \ first backtrace: dl bt ... Using the backtrace, the test-case tries to establish that we're stopped in dl_main. However, the backtrace only shows an address, because: - the dynamic linker contains no minimal symbols and no debug info, and - gdb is build without --with-separate-debug-dir so it can't find the corresponding .debug file, which does contain the mimimal symbols and debug info. As in "[gdb/testsuite] Improve probe detection in gdb.base/break-probes.exp", fix this by doing info probes and grepping for the address. Tested on x86_64-linux. 2021-09-23 Tom de Vries [gdb/testsuite] Improve probe detection in gdb.base/break-probes.exp When running test-case gdb.base/break-probes.exp on ubuntu 18.04.5, we have: ... (gdb) run^M Starting program: break-probes^M Stopped due to shared library event (no libraries added or removed)^M (gdb) bt^M #0 0x00007ffff7dd6e12 in ?? () from /lib64/ld-linux-x86-64.so.2^M #1 0x00007ffff7dedf50 in ?? () from /lib64/ld-linux-x86-64.so.2^M #2 0x00007ffff7dd5128 in ?? () from /lib64/ld-linux-x86-64.so.2^M #3 0x00007ffff7dd4098 in ?? () from /lib64/ld-linux-x86-64.so.2^M #4 0x0000000000000001 in ?? ()^M #5 0x00007fffffffdaac in ?? ()^M #6 0x0000000000000000 in ?? ()^M (gdb) UNSUPPORTED: gdb.base/break-probes.exp: probes not present on this system ... Using the backtrace, the test-case tries to establish that we're stopped in dl_main, which is used as proof that we're using probes. However, the backtrace only shows an address, because: - the dynamic linker contains no minimal symbols and no debug info, and - gdb is build without --with-separate-debug-dir so it can't find the corresponding .debug file, which does contain the mimimal symbols and debug info. Fix this by instead printing the pc and grepping for the value in the info probes output: ... (gdb) p /x $pc^M $1 = 0x7ffff7dd6e12^M (gdb) info probes^M Type Provider Name Where Object ^M ... stap rtld init_start 0x00007ffff7dd6e12 /lib64/ld-linux-x86-64.so.2 ^M ... (gdb) ... Tested on x86_64-linux. 2021-09-23 Tom de Vries [gdb/testsuite] Handle failing probe detection in gdb.base/break-probes.exp When running test-case gdb.base/break-probes.exp on ubuntu 18.04.5, we have: ... (gdb) bt^M #0 0x00007ffff7dd6e12 in ?? () from /lib64/ld-linux-x86-64.so.2^M #1 0x00007ffff7dedf50 in ?? () from /lib64/ld-linux-x86-64.so.2^M #2 0x00007ffff7dd5128 in ?? () from /lib64/ld-linux-x86-64.so.2^M #3 0x00007ffff7dd4098 in ?? () from /lib64/ld-linux-x86-64.so.2^M #4 0x0000000000000001 in ?? ()^M #5 0x00007fffffffdaac in ?? ()^M #6 0x0000000000000000 in ?? ()^M (gdb) FAIL: gdb.base/break-probes.exp: ensure using probes ... The test-case intends to emit an UNTESTED in this case, but fails to do so because it tries to do it in a regexp clause in a gdb_test_multiple, which doesn't trigger. Instead, a default clause triggers which produces the FAIL. Also the use of UNTESTED is not appropriate, and we should use UNSUPPORTED instead. Fix this by silencing the FAIL, and emitting an UNSUPPORTED after the gdb_test_multiple: ... if { ! $using_probes } { + unsupported "probes not present on this system" return -1 } ... Tested on x86_64-linux. 2021-09-23 Tom de Vries [gdb/testsuite] Use early-out style in gdb.base/break-probes.exp Reduce indentation and improve readability in test-case gdb.base/break-probes.exp by replacing: ... if { } { } ... with: ... if { ! } { return -1 } ... Tested on x86_64-linux. 2021-09-23 Pedro Alves Test that frame info/IDs are stable/consistent This adds a testcase that tests that the unwinder produces consistent frame info and frame IDs by making sure that "info frame" shows the same result when stopped at a function (level == 0), compared to when we find the same frame in the stack at a level > 0. E.g., on x86-64, right after running to main, we see: (gdb) info frame Stack level 0, frame at 0x7fffffffd340: rip = 0x555555555168 in main (gdb.base/backtrace.c:41); saved rip = 0x7ffff7dd90b3 source language c. Arglist at 0x7fffffffd330, args: Locals at 0x7fffffffd330, Previous frame's sp is 0x7fffffffd340 Saved registers: rbp at 0x7fffffffd330, rip at 0x7fffffffd338 (gdb) and then after continuing to a function called by main, and selecting the "main" frame again, we see: (gdb) info frame Stack level 3, frame at 0x7fffffffd340: rip = 0x555555555172 in main (gdb.base/backtrace.c:41); saved rip = 0x7ffff7dd90b3 caller of frame at 0x7fffffffd330 source language c. Arglist at 0x7fffffffd330, args: Locals at 0x7fffffffd330, Previous frame's sp is 0x7fffffffd340 Saved registers: rbp at 0x7fffffffd330, rip at 0x7fffffffd338 (gdb) The only differences should be in the stack level, the 'rip = ' address, and the presence of the "caller of frame at" info. All the rest should be the same. If it isn't, it probably means that the frame base, the frame ID, etc. aren't stable & consistent. The testcase exercises both the DWARF and the heuristic unwinders, using "maint set dwarf unwinder on/off". Tested on {x86-64 -m64, x86-64 -m32, Aarch64, Power8} GNU/Linux. Change-Id: I795001c82cc70d543d197415e3f80ce5dc7f3452 2021-09-23 Tom Tromey Change get_ada_task_ptid parameter type get_ada_task_ptid currently takes a 'long' as its 'thread' parameter type. However, on some platforms this is actually a pointer, and using 'long' can sometimes end up with the value being sign-extended. This sign extension can cause problems later, if the tid is then later used as an address again. This patch changes the parameter type to ULONGEST and updates all the uses. This approach preserves sign extension on the targets where it is apparently intended, while avoiding it on others. Co-Authored-By: John Baldwin 2021-09-23 Tom Tromey Change ptid_t::tid to ULONGEST The ptid_t 'tid' member is normally used as an address in gdb -- both bsd-uthread and ravenscar-thread use it this way. However, because the type is 'long', this can cause problems with sign extension. This patch changes the type to ULONGEST to ensure that sign extension does not occur. 2021-09-23 Tom Tromey Remove defaulted 'tid' parameter to ptid_t constructor I wanted to find, and potentially modify, all the spots where the 'tid' parameter to the ptid_t constructor was used. So, I temporarily removed this parameter and then rebuilt. In order to make it simpler to search through the "real" (nonzero) uses of this parameter, something I knew I'd have to do multiple times, I removed any ", 0" from constructor calls. Co-Authored-By: John Baldwin 2021-09-23 Tom Tromey Style the "XXX" text in ptype/o This patch changes gdb to use the 'highlight' style on the "XXX" text in the output of ptype/o. 2021-09-23 GDB Administrator Automatic date update in version.in 2021-09-22 Tom de Vries [gdb/testsuite] Fix gdb.python/py-events.exp With test-case gdb.python/py-events.exp on ubuntu 18.04.5 we run into: ... (gdb) info threads^M Id Target Id Frame ^M * 1 Thread 0x7ffff7fc3740 (LWP 31467) "py-events" do_nothing () at \ src/gdb/testsuite/gdb.python/py-events-shlib.c:19^M (gdb) FAIL: gdb.python/py-events.exp: get current thread ... The info thread commands uses "Thread" instead of "process" because libpthread is already loaded: ... new objfile name: /lib/x86_64-linux-gnu/libdl.so.2^M [Thread debugging using libthread_db enabled]^M Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".^M event type: new_objfile^M new objfile name: /lib/x86_64-linux-gnu/libpthread.so.0^M ... and consequently thread_db_target::pid_to_str is used. Fix this by parsing the "Thread" expression. Tested on x86_64-linux. 2021-09-22 Tom de Vries [gdb] Add maint selftest -verbose option The print_one_insn selftest in gdb/disasm-selftests.c contains: ... /* If you want to see the disassembled instruction printed to gdb_stdout, set verbose to true. */ static const bool verbose = false; ... Make this parameter available in the maint selftest command using a new option -verbose, such that we can do: ... (gdb) maint selftest -verbose print_one_insn ... Tested on x86_64-linux. 2021-09-22 Alan Modra dwarf2 sub-section test This is a testcase for the bug fixed by commit 5b4846283c3d. When running the testcase on ia64 targets I found timeouts along with lots of memory being consumed, due to ia64 gas not tracking text sub-sections. Trying to add nops for ".nop 16" in ".text 1" resulting in them being added to subsegment 0, with no increase to subsegment 1 size. This patch also fixes that problem. Note that the testcase fails on ft32-elf, mn10200-elf, score-elf, tic5x-elf, and xtensa-elf. The first two are relocation errors, the last three appear to be the .nop directive failing to emit the right number of nops. I didn't XFAIL any of them. * config/tc-ia64.c (md): Add last_text_subseg. (ia64_flush_insns, dot_endp): Use last_text_subseg. (ia64_frob_label, md_assemble): Set last_text_subseg. * testsuite/gas/elf/dwarf2-21.d, * testsuite/gas/elf/dwarf2-21.s: New test. * testsuite/gas/elf/elf.exp: Run it. 2021-09-22 Alan Modra Fix x86 "FAIL: TLS -fno-pic -shared" Fix a typo in commit 5d0869d9872a * testsuite/ld-i386/tlsnopic.rd: Typo fix. 2021-09-22 GDB Administrator Automatic date update in version.in 2021-09-21 Nick Clifton Change the linker's heuristic for computing the entry point for binaries so that shared libraries default to an entry point of 0. * ldlang.c (lang_end): When computing the entry point, only try the start address of the entry section when creating an executable. * ld.texi (Entry point): Update description of heuristic used to choose the entry point. testsuite/ld-alpha/tlspic.rd: Update expected entry point address. testsuite/ld-arm/tls-gdesc-got.d: Likewise. testsuite/ld-i386/tlsnopic.rd: Likewise. testsuite/ld-ia64/tlspic.rd: Likewise. testsuite/ld-sparc/gotop32.rd: Likewise. testsuite/ld-sparc/gotop64.rd: Likewise. testsuite/ld-sparc/tlssunnopic32.rd: Likewise. testsuite/ld-sparc/tlssunnopic64.rd: Likewise. testsuite/ld-sparc/tlssunpic32.rd: Likewise. testsuite/ld-sparc/tlssunpic64.rd: Likewise. testsuite/ld-tic6x/shlib-1.rd: Likewise. testsuite/ld-tic6x/shlib-1b.rd: Likewise. testsuite/ld-tic6x/shlib-1r.rd: Likewise. testsuite/ld-tic6x/shlib-1rb.rd: Likewise. testsuite/ld-tic6x/shlib-noindex.rd: Likewise. testsuite/ld-x86-64/pr14207.d: Likewise. testsuite/ld-x86-64/tlsdesc.rd: Likewise. testsuite/ld-x86-64/tlspic.rd: Likewise. testsuite/ld-x86-64/tlspic2.rd: Likewise. 2021-09-21 Tom de Vries [gdb/testsuite] Handle supports_memtag in gdb.base/gdb-caching-proc.exp In test-case gdb.base/gdb-caching-proc.exp, we run all procs declared with gdb_caching_proc. Some of these require a gdb instance, some not. We could just do a clean_restart every time, but that would amount to 44 gdb restarts. We try to minimize this by doing this only for the few procs that need it, and hardcoding those in the test-case. For those procs, we do a clean_restart, execute the proc, and then do a gdb_exit, to make sure the gdb instance doesn't linger such that we detect procs that need a gdb instance but are not listed in the test-case. However, that doesn't work in the case of gnat_runtime_has_debug_info. This proc doesn't require a gdb instance because it starts its own. But it doesn't clean up the gdb instance, and since it's not listed, the test-case doesn't clean up the gdb instance eiter. Consequently, the proc supports_memtag (which should be listed, but isn't) uses the gdb instance started by gnat_runtime_has_debug_info rather than throwing an error. Well, unless gnat_runtime_has_debug_info fails before starting a gdb instance, in which case we do run into the error. Fix this by: - doing gdb_exit unconditionally - fixing the resulting error by adding supports_memtag in the test-case to the "needing gdb instance" list Tested on x86_64-linux. 2021-09-21 Felix Willgerodt gdb, doc: Add ieee_half and bfloat16 to list of predefined target types. For some reason these two weren't added to the list when they were orginally added to GDB. gdb/doc/ChangeLog: 2021-09-21 Felix Willgerodt * gdb.texinfo (Predefined Target Types): Mention ieee_half and bfloat16. 2021-09-21 GDB Administrator Automatic date update in version.in 2021-09-20 Tom de Vries [gdb/testsuite] Fix gdb.ada/interface.exp with gcc-9 When running test-case gdb.ada/interface.exp with gcc-9, we run into: ... (gdb) info locals^M s = (x => 1, y => 2, w => 3, h => 4)^M r = (x => 1, y => 2, w => 3, h => 4)^M (gdb) FAIL: gdb.ada/interface.exp: info locals ... The failure is caused by the regexp expecting variable r followed by variable s. Fix this by allowing variable s followed by variable r as well. Tested on x86_64-linux. 2021-09-20 Tom de Vries [gdb/testsuite] Fix gdb.ada/mi_prot.exp When running test-case gdb.ada/mi_prot.exp with gcc 8.5.0, we run into: ... (gdb) ^M Expecting: ^(-stack-list-arguments --no-frame-filters 1[^M ]+)?(\^done,stack=.*[^M ]+[(]gdb[)] ^M [ ]*) -stack-list-arguments --no-frame-filters 1^M ^done,stack-args=[frame={level="0",args=[{name="<_object>",value="(ceiling_priority =\ > 97, local => 0)"},{name="v",value="5"},{name="<_objectO>",value="true"}]},frame={le\ vel="1",args=[{name="v",value="5"},{name="<_objectO>",value="true"}]},frame={level="2\ ",args=[]}]^M (gdb) ^M FAIL: gdb.ada/mi_prot.exp: -stack-list-arguments --no-frame-filters 1 (unexpected out\ put) ... Fix this by updating the regexp to expect "^done,stack-args=" instead of "^done,stack=". Tested on x86_64-linux. 2021-09-20 Tom de Vries [gdb/testsuite] Register test for each arch separately in register_test_foreach_arch In gdb/disasm-selftests.c we have: ... selftests::register_test_foreach_arch ("print_one_insn", selftests::print_one_insn_test); ... and we get: ... $ gdb -q -batch -ex "maint selftest print_one_insn" 2>&1 \ | grep ^Running Running selftest print_one_insn. $ ... Change the semantics register_test_foreach_arch such that a version of print_one_insn is registered for each architecture, such that we have: ... $ gdb -q -batch -ex "maint selftest print_one_insn" 2>&1 \ | grep ^Running Running selftest print_one_insn::A6. Running selftest print_one_insn::A7. Running selftest print_one_insn::ARC600. ... $ ... This makes it f.i. possible to do: ... $ gdb -q -batch a.out -ex "maint selftest print_one_insn::armv8.1-m.main" Running selftest print_one_insn::armv8.1-m.main. Self test failed: self-test failed at src/gdb/disasm-selftests.c:165 Ran 1 unit tests, 1 failed ... Tested on x86_64-linux with an --enable-targets=all build. 2021-09-20 Tom de Vries [gdb] Change register_test to use std::function arg Change register_test to use std::function arg, such that we can do: ... register_test (test_name, [=] () { SELF_CHECK (...); }); ... Tested on x86_64-linux. 2021-09-20 Tom de Vries [gdb/testsuite] Fix gdb.ada/big_packed_array.exp xfail for -m32 With test-case gdb.ada/big_packed_array.exp and target board unix/-m32 I run into: ... (gdb) print bad^M $2 = (0 => 0 , 160)^M (gdb) FAIL: gdb.ada/big_packed_array.exp: scenario=minimal: print bad ... The problem is that while the variable is an array of 196 bits (== 24.5 bytes), the debug information describes it as 25 unsigned char. This is PR gcc/101643, and the test-case contains an xfail for this, which catches only: ... (gdb) print bad^M $2 = (0 => 0 )^M ... Fix this by updating the xfail pattern. Tested on x86_64-linux. 2021-09-20 Simon Marchi gdbsupport/gdb_proc_service.h: use decltype instead of typeof Bug 28341 shows that GDB fails to compile when built with -std=c++11. I don't know much about the use case, but according to the author of the bug: I encountered the scenario where CXX is set to "g++ -std=c++11" when I try to compile binutils under GCC as part of the GCC 3-stage compilation, which is common for building a cross-compiler. The author of the bug suggests using __typeof__ instead of typeof. But since we're using C++, we might as well use decltype, which is standard. This is what this patch does. The failure (and fix) can be observed by configuring GDB with CXX="g++ -std=c++11": CXX linux-low.o In file included from /home/simark/src/binutils-gdb/gdbserver/gdb_proc_service.h:22, from /home/simark/src/binutils-gdb/gdbserver/linux-low.h:27, from /home/simark/src/binutils-gdb/gdbserver/linux-low.cc:20: /home/simark/src/binutils-gdb/gdbserver/../gdbsupport/gdb_proc_service.h:177:50: error: expected constructor, destructor, or type conversion before (token 177 | __attribute__((visibility ("default"))) typeof (SYM) SYM | ^ /home/simark/src/binutils-gdb/gdbserver/../gdbsupport/gdb_proc_service.h:179:1: note: in expansion of macro PS_EXPORT 179 | PS_EXPORT (ps_get_thread_area); | ^~~~~~~~~ Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28341 Change-Id: I84fbaae938209d8d935ca08dec9b7e6a0dd1bda0 2021-09-20 Andrew Burgess riscv: print .2byte or .4byte before an unknown instruction encoding When the RISC-V disassembler encounters an unknown instruction, it currently just prints the value of the bytes, like this: Dump of assembler code for function custom_insn: 0x00010132 <+0>: addi sp,sp,-16 0x00010134 <+2>: sw s0,12(sp) 0x00010136 <+4>: addi s0,sp,16 0x00010138 <+6>: 0x52018b 0x0001013c <+10>: 0x9c45 My proposal, in this patch, is to change the behaviour to this: Dump of assembler code for function custom_insn: 0x00010132 <+0>: addi sp,sp,-16 0x00010134 <+2>: sw s0,12(sp) 0x00010136 <+4>: addi s0,sp,16 0x00010138 <+6>: .4byte 0x52018b 0x0001013c <+10>: .2byte 0x9c45 Adding the .4byte and .2byte opcodes. The benefit that I see here is that in the patched version of the tools, the disassembler output can be fed back into the assembler and it should assemble to the same binary format. Before the patch, the disassembler output is invalid assembly. I've started a RISC-V specific test file under binutils so that I can add a test for this change. binutils/ChangeLog: * testsuite/binutils-all/riscv/riscv.exp: New file. * testsuite/binutils-all/riscv/unknown.d: New file. * testsuite/binutils-all/riscv/unknown.s: New file. opcodes/ChangeLog: * riscv-dis.c (riscv_disassemble_insn): Print a .%dbyte opcode before an unknown instruction, '%d' is replaced with the instruction length. 2021-09-20 Alan Modra Fix allocate_filenum last dir/file checks * dwarf2dbg.c (allocate_filenum) Correct use of last_used_dir_len. 2021-09-20 Alan Modra Re: PR28149, debug info with wrong file association Fixes segfaults when building aarch64-linux kernel, due to only doing part of the work necessary when allocating file numbers late. I'd missed looping over subsegments, which resulted in some u.filename entries left around and later interpreted as u.view. PR 28149 * dwarf2dbg.c (purge_generated_debug): Iterate over subsegs too. (dwarf2_finish): Call do_allocate_filenum for all subsegs too, in a separate loop before subsegs are chained. 2021-09-20 Alan Modra Move eelf_mipsel_haiki.c to ALL_64_EMULATION_SOURCES --enable-targets=all on a 32-bit host results in a link failure with undefined references due to elfxx-mips.c not being compiled. This patch fixes that by putting eelf_mipsel_haiki.c in the correct EMULATION_SOURCES Makefile variable. I've also added a bunch of missing file dependencies and sorted a few things so that it's easier to verify dependencies are present. * Makfile.am: Add missing haiku dependencies, sort. (ALL_EMULATION_SOURCES): Sort. Move eelf_mipsel_haiku.c to.. (ALL_64_EMULATION_SOURCES): ..here. Sort. * Makfile.in: Regenerate. 2021-09-20 GDB Administrator Automatic date update in version.in 2021-09-19 H.J. Lu elf: Don't set version info on unversioned symbols Don't set version info on unversioned symbols when seeing a hidden versioned symbol after an unversioned definition and the default versioned symbol. bfd/ PR ld/28348 * elflink.c (elf_link_add_object_symbols): Don't set version info on unversioned symbols. ld/ PR ld/28348 * testsuite/ld-elf/pr28348.rd: New file. * testsuite/ld-elf/pr28348.t: Likewise. * testsuite/ld-elf/pr28348a.c: Likewise. * testsuite/ld-elf/pr28348b.c: Likewise. * testsuite/ld-elf/pr28348c.c: Likewise. * testsuite/ld-elf/shared.exp: Run PR ld/28348 tests. 2021-09-19 Mike Frysinger gdb: manual: update @inforef to @xref The @inforef command is deprecated, and @xref does the samething. Also had to update the text capitalization to match current manual. Verified that info & HTML links work. 2021-09-19 Weimin Pan CTF: multi-CU and archive support Now gdb is capable of debugging executable, which consists of multiple compilation units (CUs) with the CTF debug info. An executable could potentially have one or more archives, which, in CTF context, contain conflicting types. all changes were made in ctfread.c in which elfctf_build_psymtabs was modified to handle archives, via the ctf archive iterator and its callback build_ctf_archive_member and scan_partial_symbols was modified to scan archives, which are treated as subfiles, to build the psymtabs. Also changes were made to handle CTF's data object section and function info section which now share the same format of their contents - an array of type IDs. New functions ctf_psymtab_add_stt_entries, which is called by ctf_psymtab_add_stt_obj and ctf_psymtab_add_stt_func, and add_stt_entries, which is called by add_stt_obj and add_stt_func when setting up psymtabs and full symtab, respectively. 2021-09-19 GDB Administrator Automatic date update in version.in 2021-09-18 Tom de Vries [gdb/testsuite] Fix gdb.server/server-kill.exp with -m32 When running test-case gdb.server/server-kill.exp with target board unix/-m32, I run into: ... 0xf7fd6b20 in _start () from /lib/ld-linux.so.2^M (gdb) Executing on target: kill -9 13082 (timeout = 300) builtin_spawn -ignore SIGHUP kill -9 13082^M bt^M (gdb) FAIL: gdb.server/server-kill.exp: kill_pid_of=server: test_unwind_syms: bt ... The test-case expects the backtrace command to trigger remote communication, which then should result in a "Remote connection closed" or similar. However, no remote communication is triggered, because we hit the "Check that this frame is unwindable" case in get_prev_frame_always_1. We don't hit this problem in the kill_pid_of=inferior case, because there we run to main before doing the backtrace. Fix this by doing the same in the kill_pid_of=server case. Tested on x86_64-linux. 2021-09-18 Tom de Vries [gdb/ada] Handle artificial local symbols With current master and gcc 7.5.0/8.5.0, we have this timeout: ... (gdb) print s^M Multiple matches for s^M [0] cancel^M [1] s at src/gdb/testsuite/gdb.ada/interface/foo.adb:20^M [2] s at src/gdb/testsuite/gdb.ada/interface/foo.adb:?^M > FAIL: gdb.ada/interface.exp: print s (timeout) ... [ The FAIL doesn't reproduce with gcc 9.3.1. This difference in behaviour bisects to gcc commit d70ba0c10de. The FAIL with earlier gcc bisects to gdb commit ba8694b650b. ] The FAIL is caused by gcc generating this debug info describing a named artificial variable: ... <2><1204>: Abbrev Number: 31 (DW_TAG_variable) <1205> DW_AT_name : s.14 <1209> DW_AT_type : <0x1213> <120d> DW_AT_artificial : 1 <120d> DW_AT_location : 5 byte block: 91 e0 7d 23 18 \ (DW_OP_fbreg: -288; DW_OP_plus_uconst: 24) ... An easy way to fix this would be to simply not put named artificial variables into the symbol table. However, that causes regressions for Ada. It relies on being able to get the value from such variables, using a named reference. Fix this instead by marking the symbol as artificial, and: - ignoring such symbols in ada_resolve_variable, which fixes the FAIL - ignoring such ada symbols in do_print_variable_and_value, which prevents them from showing up in "info locals" Note that a fix for the latter was submitted here ( https://sourceware.org/pipermail/gdb-patches/2008-January/054994.html ), and this patch borrows from it. Tested on x86_64-linux. Co-Authored-By: Joel Brobecker Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28180 2021-09-18 GDB Administrator Automatic date update in version.in 2021-09-17 Alan Modra PR28149 part 2, purge generated line info Mixing compiler generated line info with gas generated line info is generally just confusing. Also .loc directives with non-zero view fields might reference a previous .loc. It becomes a little more tricky to locate that previous .loc if there might be gas generated line info present too. Mind you, we turn off gas generation of line info on seeing compiler generated line info, so any reference back won't hit gas generated line info. At least, if the view info is sane. Unfortunately, gas needs to handle mangled source. PR 28149 * dwarf2dbg.c (purge_generated_debug): New function. (dwarf2_directive_filename): Call the above. (out_debug_line): Don't segfault after purging. * testsuite/gas/i386/dwarf2-line-4.d: Update expected output. * testsuite/gas/i386/dwarf4-line-1.d: Likewise. * testsuite/gas/i386/dwarf5-line-1.d: Likewise. * testsuite/gas/i386/dwarf5-line-2.d: Likewise. 2021-09-17 Alan Modra PR28149, debug info with wrong file association gcc-11 and gcc-12 pass -gdwarf-5 to gas, in order to prime gas for DWARF 5 level debug info. Unfortunately it seems there are cases where the compiler does not emit a .file or .loc dwarf debug directive before any machine instructions. (Note that the .file directive typically emitted as the first line of assembly output doesn't count as a dwarf debug directive. The dwarf .file has a file number before the file name string.) This patch delays allocation of file numbers for gas generated line debug info until the end of assembly, thus avoiding any clashes with compiler generated file numbers. Two fixes for test case source are necessary; A .loc can't use a file number that hasn't already been specified with .file. A followup patch will remove all the gas generated line info on seeing a .file directive. PR 28149 * dwarf2dbg.c (num_of_auto_assigned): Delete. (current): Update initialisation. (set_or_check_view): Replace all accesses to view with u.view. (dwarf2_consume_line_info): Likewise. (dwarf2_directive_loc): Likewise. Assert that we aren't generating line info. (dwarf2_gen_line_info_1): Don't call set_or_check_view on gas generated line entries. (dwarf2_gen_line_info): Set and track filenames for gas generated line entries. Simplify generation of labels. (get_directory_table_entry): Use filename_cmp when comparing dirs. (do_allocate_filenum): New function. (dwarf2_where): Set u.filename and filenum to -1 for gas generated line entries. (dwarf2_directive_filename): Remove num_of_auto_assigned handling. (process_entries): Update view field access. Call do_allocate_filenum. * dwarf2dbg.h (struct dwarf2_line_info): Add filename field in union aliasing view. * testsuite/gas/i386/dwarf2-line-3.s: Add .file directive. * testsuite/gas/i386/dwarf2-line-4.s: Likewise. * testsuite/gas/i386/dwarf2-line-4.d: Update expected output. * testsuite/gas/i386/dwarf4-line-1.d: Likewise. * testsuite/gas/i386/dwarf5-line-1.d: Likewise. * testsuite/gas/i386/dwarf5-line-2.d: Likewise. 2021-09-17 Alan Modra [GOLD] PowerPC64 support for sym+addend GOT entries Pass addends to all the GOT handling functions, plus remove some extraneous asserts. PR 28192 * powerpc.cc (Output_data_got_powerpc): Add addend parameter to all methods creating got entries. (Target_powerpc::Scan::local): Pass reloc addend to got handling functions, and when creating dynamic got relocations. (Target_powerpc::Scan::global): Likewise. (Target_powerpc::Relocate::relocate): Likewise. Remove extraneous assertions. 2021-09-17 Alan Modra [GOLD] Got_entry::write addends This takes care of writing out GOT entries with addends. The local symbol case was already largely handled, except for passing the addend to tls_offset_for_local which might need the addend in a local_got_offset call. That's needed also in tls_offset_for_global. I'm assuming here that GOT entries for function symbols won't ever have addends, and in particular that a GOT entry referencing PLT call stub code won't want an offset into the code. PR 28192 * output.cc (Output_data_got::Got_entry::write): Include addend in global symbol value. Pass addend to tls_offset_for_*. * powerpc.cc (Target_powerpc::do_tls_offset_for_local): Handle addend. (Target_powerpc::do_tls_offset_for_global): Likewise. * s390.cc (Target_s390::do_tls_offset_for_local): Likewise. (Target_s390::do_tls_offset_for_global): Likewise. * target.h (Target::tls_offset_for_local): Add addend param. (Target::tls_offset_for_global): Likewise. (Target::do_tls_offset_for_local): Likewise. (Target::do_tls_offset_for_global): Likewise. 2021-09-17 Alan Modra [GOLD] Output_data_got create entry method addends This patch makes all the Output_data_got methods that create new entries accept an optional addend. PR 28192 * output.h (Output_data_got::add_global): Add optional addend parameter. Update comment. Delete overload without addend. (Output_data_got::add_global_plt): Likewise. (Output_data_got::add_global_tls): Likewise. (Output_data_got::add_global_with_rel): Likewise. (Output_data_got::add_global_pair_with_rel): Likewise. (Output_data_got::add_local_plt): Likewise. (Output_data_got::add_local_tls): Likewise. (Output_data_got::add_local_tls_pair): Likewise. (Output_data_got::reserve_local): Likewise. (Output_data_got::reserve_global): Likewise. (Output_data_got::Got_entry): Include addend in global sym constructor. Delete local sym constructor without addend. * output.cc (Output_data_got::add_global): Add addend param, pass to got handling methods. (Output_data_got::add_global_plt): Likewise. (Output_data_got::add_global_with_rel): Likewise. (Output_data_got::add_global_pair_with_rel): Likewise. (Output_data_got::add_local_plt): Likewise. (Output_data_got::add_local_tls_pair): Likewise. (Output_data_got::reserve_local): Likewise. (Output_data_got::reserve_global): Likewise. 2021-09-17 Alan Modra [GOLD] Output_data_got tidy Some Output_data_got methods already have support for addends, but were implemented as separate methods. This removes unnecessary code duplication. Relobj::local_has_got_offset and others there get a similar treatment. Comments are removed since it should be obvious without a comment, and the existing comments are not precisely what the code does. For example, a local_has_got_offset call without an addend does not return whether the local symbol has *a* GOT offset of type GOT_TYPE, it returns whether there is a GOT entry of type GOT_TYPE for the symbol with addend of zero. PR 28192 * output.h (Output_data_got::add_local): Make addend optional. (Output_data_got::add_local_with_rel): Likewise. (Output_data_got::add_local_pair_with_rel): Likewise. * output.cc (Output_data_got::add_local): Delete overload without addend. (Output_data_got::add_local_with_rel): Likewise. (Output_data_got::add_local_pair_with_rel): Likewise. * object.h (Relobj::local_has_got_offset): Make addend optional. Delete overload without addend later. Update comment. (Relobj::local_got_offset): Likewise. (Relobj::set_local_got_offset): Likewise. 2021-09-17 Alan Modra [GOLD] Remove addend from Local_got_entry_key This patch removes the addend from Local_got_entry_key, which is unnecessary now that Got_offset_list has an addend. Note that it might be advantageous to keep the addend in Local_got_entry_key when linking objects containing a large number of section_sym+addend@got relocations. I opted to save some memory by removing the field but left the class there in case we might need to restore {sym,addend} lookup. That's also why this change is split out from the Got_offset_list change. PR 28192 * object.h (Local_got_entry_key): Delete addend_ field. Adjust constructor and methods to suit. * object.cc (Sized_relobj::do_for_all_local_got_entries): Update key. 2021-09-17 Alan Modra [GOLD] Got_offset_list: addend field This is the first in a series of patches aimed at supporting GOT entries against symbol plus addend generally for PowerPC64 rather than just section symbol plus addend as gold has currently. This patch adds an addend field to Got_offset_list, so that both local and global symbols can have GOT entries with addend. PR 28192 * object.h (Got_offset_list): Add addend_ field, init in both constructors. Adjust all accessors to suit. (Sized_relobj::do_local_has_got_offset): Adjust to suit. (Sized_relobj::do_local_got_offset): Likewise. (Sized_relobj::do_set_local_got_offset): Likewise. * symtab.h (Symbol::has_got_offset): Add optional addend param. (Symbol::got_offset, Symbol::set_got_offset): Likewise. * incremental.cc (Local_got_offset_visitor::visit): Add unused uint64_t parameter with FIXME. (Global_got_offset_visitor::visit): Add unused uint64_t parameter. 2021-09-17 Henry Castro Fix segfault when running ia16-elf-gdb "A problem internal to GDB has been detected, further debugging may prove unreliable." Segmentation fault 2021-09-17 Nelson Chu RISC-V: Merged extension string tables and their version tables into one. There are two main reasons for this patch, * In the past we had two extension tables, one is used to record all supported extensions in bfd/elfxx-riscv.c, another is used to get the default extension versions in gas/config/tc-riscv.c. It is hard to maintain lots of tables in different files, but in fact we can merge them into just one table. Therefore, we now define many riscv_supported_std* tables, which record names and versions for all supported extensions. We not only use these tables to initialize the riscv_ext_order, but also use them to get the default versions of extensions, and decide if the extensions should be enbaled by default. * We add a new filed `default_enable' for the riscv_supported_std* tables, to decide if the extension should be enabled by default. For now if the `default_enable' field of the extension is set to EXT_DEFAULT, then we should enable the extension when the -march and elf architecture attributes are not set. In the future, I suppose the `default_enable' can be set to lots of EXT_, each vendor can decide to open which extensions, when the target triple of vendor is chosen. The elf/linux regression tests of riscv-gnu-toolchain are passed. bfd/ * elfnn-riscv.c (cpu-riscv.h): Removed sine it is included in bfd/elfxx-riscv.h. (riscv_merge_std_ext): Updated since the field of rpe is changed. * elfxx-riscv.c (cpu-riscv.h): Removed. (riscv_implicit_subsets): Added implicit extensions for g. (struct riscv_supported_ext): Used to be riscv_ext_version. Moved from gas/config/tc-riscv.c, and added new field `default_enable' to decide if the extension should be enabled by default. (EXT_DEFAULT): Defined for `default_enable' field. (riscv_supported_std_ext): It used to return the supported standard architecture string, but now we move ext_version_table from gas/config/tc-riscv.c to here, and rename it to riscv_supported_std_ext. Currently we not only use the table to initialize riscv_ext_order, but also get the default versions of extensions, and decide if the extensions should be enbaled by default. (riscv_supported_std_z_ext): Likewise, but is used for z* extensions. (riscv_supported_std_s_ext): Likewise, but is used for s* extensions. (riscv_supported_std_h_ext): Likewise, but is used for h* extensions. (riscv_supported_std_zxm_ext): Likewise, but is used for zxm* extensions. (riscv_all_supported_ext): Includes all supported extension tables. (riscv_known_prefixed_ext): Updated. (riscv_valid_prefixed_ext): Updated. (riscv_init_ext_order): Init the riscv_ext_order table according to riscv_supported_std_ext. (riscv_get_default_ext_version): Moved from gas/config/tc-riscv.c. Get the versions of extensions from riscv_supported_std* tables. (riscv_parse_add_subset): Updated. (riscv_parse_std_ext): Updated. (riscv_set_default_arch): Set the default subset list according to the default_enable field of riscv_supported_*ext tables. (riscv_parse_subset): If the input ARCH is NULL, then we call riscv_set_default_arch to set the default subset list. * elfxx-riscv.h (cpu-riscv.h): Included. (riscv_parse_subset_t): Removed get_default_version field, and added isa_spec field to replace it. (extern riscv_supported_std_ext): Removed. gas/ * (bfd/cpu-riscv.h): Removed. (struct riscv_ext_version): Renamed and moved to bfd/elfxx-riscv.c. (ext_version_table): Likewise. (riscv_get_default_ext_version): Likewise. (ext_version_hash): Removed. (init_ext_version_hash): Removed. (riscv_set_arch): Updated since the field of rps is changed. Besides, report error when the architecture string is empty. (riscv_after_parse_args): Updated. 2021-09-17 GDB Administrator Automatic date update in version.in 2021-09-16 Tom de Vries [gdb/testsuite] Fix interrupted sleep in multi-threaded test-cases When running test-case gdb.threads/continue-pending-status.exp with native, I have: ... (gdb) continue^M Continuing.^M PASS: gdb.threads/continue-pending-status.exp: attempt 0: continue for ctrl-c ^C^M Thread 1 "continue-pendin" received signal SIGINT, Interrupt.^M [Switching to Thread 0x7ffff7fc4740 (LWP 1276)]^M 0x00007ffff758e4c0 in __GI___nanosleep () at nanosleep.c:27^M 27 return SYSCALL_CANCEL (nanosleep, requested_time, remaining);^M (gdb) PASS: gdb.threads/continue-pending-status.exp: attempt 0: caught interrupt ... but with target board unix/-m32, I run into: ... (gdb) continue^M Continuing.^M PASS: gdb.threads/continue-pending-status.exp: attempt 0: continue for ctrl-c [Thread 0xf74aeb40 (LWP 31957) exited]^M [Thread 0xf7cafb40 (LWP 31956) exited]^M [Inferior 1 (process 31952) exited normally]^M (gdb) Quit^M ... The problem is that the sleep (300) call at the end of main is interrupted, which causes the inferior to exit before the ctrl-c can be send. This problem is described at "Interrupted System Calls" in the docs, and the suggested solution (using a sleep loop) indeed fixes the problem. Fix this instead using the more prevalent: ... alarm (300); ... while (1) sleep (1); ... which is roughly equivalent because the sleep is called at the end of main, but slightly better because it guards against hangs from the start rather than from the end of main. Likewise in gdb.base/watch_thread_num.exp. Likewise in gdb.btrace/enable-running.exp, but use the sleep loop there, because the sleep is not called at the end of main. Tested on x86_64-linux. 2021-09-16 Mike Frysinger gdb: manual: fix werrors typo 2021-09-16 GDB Administrator Automatic date update in version.in 2021-09-15 Tom de Vries [gdb/testsuite] Use function_range in gdb.dwarf2/dw2-abs-hi-pc.exp When I run test-case gdb.dwarf2/dw2-abs-hi-pc.exp with gcc, we have: ... (gdb) break hello^M Breakpoint 1 at 0x4004c0: file dw2-abs-hi-pc-hello.c, line 24.^M (gdb) PASS: gdb.dwarf2/dw2-abs-hi-pc.exp: break hello ... but with clang, I run into: ... (gdb) break hello^M Breakpoint 1 at 0x4004e4^M (gdb) FAIL: gdb.dwarf2/dw2-abs-hi-pc.exp: break hello ... The problem is that the CU and function both have an empty address range: ... <0>: Abbrev Number: 1 (DW_TAG_compile_unit) <108> DW_AT_name : dw2-abs-hi-pc-hello.c <123> DW_AT_low_pc : 0x4004e0 <127> DW_AT_high_pc : 0x4004e0 <1><12f>: Abbrev Number: 2 (DW_TAG_subprogram) <131> DW_AT_name : hello <13a> DW_AT_low_pc : 0x4004e0 <13e> DW_AT_high_pc : 0x4004e0 ... The address ranges are set like this in dw2-abs-hi-pc-hello-dbg.S: ... .4byte .hello_start /* DW_AT_low_pc */ .4byte .hello_end /* DW_AT_high_pc */ ... where the labels refer to dw2-abs-hi-pc-hello.c: ... extern int v; asm (".hello_start: .globl .hello_start\n"); void hello (void) { asm (".hello0: .globl .hello0\n"); v++; asm (".hello1: .globl .hello1\n"); } asm (".hello_end: .globl .hello_end\n"); ... Using asm labels in global scope is a known source of problems, as explained in the comment of proc function_range in gdb/testsuite/lib/dwarf.exp. Fix this by using function_range instead. Tested on x86_64-linux with gcc and clang-7 and clang-12. 2021-09-15 Claudiu Zissulescu arc: Fix got-weak linker test Use regular expressions to fix the got-weak linker test. ld/ * testsuite/got-weak.d: Update test. 2021-09-15 Andrew Burgess bfd: fix incorrect type used in sizeof Noticed in passing that we used 'sizeof (char **)' when calculating the size of a list of 'char *' pointers. Of course, this isn't really going to make a difference anywhere, but we may as well be correct. There should be no user visible changes after this commit. bfd/ChangeLog: * archures.c (bfd_arch_list): Use 'char *' instead of 'char **' when calculating space for a string list. 2021-09-15 Tom de Vries [gdb/doc] Fix typo in maint selftest entry Fix typo "will by" -> "will be". 2021-09-15 Tom de Vries [bfd] Ensure unique printable names for bfd archs Remove duplicate entry in bfd_ft32_arch and bfd_rx_arch. Fix printable name for bfd_mach_n1: "nh1" -> "n1". PR 28336 * cpu-ft32.c (arch_info_struct): Remove "ft32" entry. * cpu-rx.c (arch_info_struct): Remove "rx" entry. * cpu-nds32.c (bfd_nds32_arch): Fix printable name for bfd_mach_n1 entry. 2021-09-15 Alan Modra PR28328, dlltool ice PR 28328 * archive.c (bfd_ar_hdr_from_filesystem): Don't use bfd_set_input_error here, our caller will do that. 2021-09-15 GDB Administrator Automatic date update in version.in 2021-09-14 Tom de Vries [gdb/testsuite] Fix gdb_load_no_complaints with gnu-debuglink When running test-case gdb.dwarf2/dw2-ranges-psym-warning.exp with target board gnu-debuglink I run into: ... (gdb) file dw2-ranges-psym-warning^M Reading symbols from dw2-ranges-psym-warning...^M Reading symbols from .debug/dw2-ranges-psym-warning.debug...^M (gdb) FAIL: gdb.dwarf2/dw2-ranges-psym-warning.exp: No complaints ... Fix this by updating the regexp in gdb_load_no_complaints. Tested on x86_64-linux. 2021-09-14 Tom de Vries [gdb/symtab] Fix function range handling in psymtabs Consider the test-case from this patch. We run into: ... (gdb) PASS: gdb.dwarf2/dw2-ranges-psym-warning.exp: continue bt^M warning: (Internal error: pc 0x4004b6 in read in psymtab, but not in symtab.)^M ^M warning: (Internal error: pc 0x4004b6 in read in psymtab, but not in symtab.)^M ^M warning: (Internal error: pc 0x4004b6 in read in psymtab, but not in symtab.)^M ^M warning: (Internal error: pc 0x4004b6 in read in psymtab, but not in symtab.)^M ^M warning: (Internal error: pc 0x4004b6 in read in psymtab, but not in symtab.)^M ^M warning: (Internal error: pc 0x4004b6 in read in psymtab, but not in symtab.)^M ^M read in psymtab, but not in symtab.)^M ^M )^M (gdb) FAIL: gdb.dwarf2/dw2-ranges-psym-warning.exp: bt ... This happens as follows. The function foo: ... <1><31>: Abbrev Number: 4 (DW_TAG_subprogram) <33> DW_AT_name : foo <37> DW_AT_ranges : 0x0 ... has these ranges: ... 00000000 00000000004004c1 00000000004004d2 00000000 00000000004004ae 00000000004004af 00000000 ... which have a hole at at [0x4004af,0x4004c1). However, the address map of the partial symtabs incorrectly maps addresses in the hole (such as 0x4004b6 in the backtrace) to the foo CU. The address map of the full symbol table of the foo CU however does not contain the addresses in the hole, which is what the warning / internal error complains about. Fix this by making sure that ranges of functions are read correctly. The patch adds a bit to struct partial_die_info, in this hole (shown for x86_64-linux): ... /* 11: 7 | 4 */ unsigned int canonical_name : 1; /* XXX 4-byte hole */ /* 16 | 8 */ const char *raw_name; ... So there's no increase in size for 64-bit, but AFAIU there will be an increase for 32-bit. Tested on x86_64-linux. gdb/ChangeLog: 2021-08-10 Tom de Vries PR symtab/28200 * dwarf2/read.c (struct partial_die_info): Add has_range_info and range_offset field. (add_partial_subprogram): Handle pdi->has_range_info. (partial_die_info::read): Set pdi->has_range_info. gdb/testsuite/ChangeLog: 2021-08-10 Tom de Vries PR symtab/28200 * gdb.dwarf2/dw2-ranges-psym-warning-main.c: New test. * gdb.dwarf2/dw2-ranges-psym-warning.c: New test. * gdb.dwarf2/dw2-ranges-psym-warning.exp: New file. 2021-09-14 Tom de Vries [gdb/symtab] Fix CU list in .debug_names for dummy CUs With current trunk and target board cc-with-debug-names we have: ... (gdb) file dw2-ranges-psym^M Reading symbols from dw2-ranges-psym...^M warning: Section .debug_names in dw2-ranges-psym has abbreviation_table of \ size 1 vs. written as 28, ignoring .debug_names.^M (gdb) set complaints 0^M (gdb) FAIL: gdb.dwarf2/dw2-ranges-psym.exp: No complaints ... The executable has 8 compilation units: ... $ readelf -wi dw2-ranges-psym | grep @ Compilation Unit @ offset 0x0: Compilation Unit @ offset 0x2e: Compilation Unit @ offset 0xa5: Compilation Unit @ offset 0xc7: Compilation Unit @ offset 0xd2: Compilation Unit @ offset 0x145: Compilation Unit @ offset 0x150: Compilation Unit @ offset 0x308: ... of which the ones at 0xc7 and 0x145 are dummy CUs (that is, they do not contain a single DIE), which were added by recent commit 5ef670d81fd "[gdb/testsuite] Add dummy start and end CUs in dwarf assembly". The .debug_names section contains this CU table: ... [ 0] 0x0 [ 1] 0x2e [ 2] 0xa5 [ 3] 0xd2 [ 4] 0x150 [ 5] 0x308 [ 6] 0x1 [ 7] 0x0 ... The last two entries are incorrect, and the entries for the dummy CUs are missing. The last two entries are incorrect because here in write_debug_names we write the dimension of the CU list as 8: ... /* comp_unit_count - The number of CUs in the CU list. */ header.append_uint (4, dwarf5_byte_order, per_objfile->per_bfd->all_comp_units.size () - per_objfile->per_bfd->tu_stats.nr_tus); ... while the actual dimension of the CU list is 6. The discrepancy is caused by this code which skips the dummy CUs: ... for (int i = 0; i < per_objfile->per_bfd->all_comp_units.size (); ++i) { ... /* CU of a shared file from 'dwz -m' may be unused by this main file. It may be referenced from a local scope but in such case it does not need to be present in .debug_names. */ if (psymtab == NULL) continue; ... because they have a null partial symtab. We can fix this by writing the actual dimension of the CU list, but that still leaves the dummy CUs out of the CU list. The purpose of having these is to delimit the end of preceding CUs. So, fix this by: - removing the code that skips the dummy CUs (note that the same change was done for .gdb_index in commit efba5c2319d '[gdb/symtab] Handle PU without import in "save gdb-index"'. - verifying that all units are represented in the CU/TU lists - using the actual CU list size when writing the dimension of the CU list (and likewise for the TU list). Tested on x86_64-linux with native and target board cc-with-debug-names. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28261 2021-09-14 Tom de Vries [gdb/testsuite] Generate .debug_aranges in gdb.dwarf2/locexpr-data-member-location.exp When running test-case gdb.dwarf2/locexpr-data-member-location.exp with target board cc-with-debug-names, all tests pass but we run into PR28261: ... (gdb) run ^M Starting program: locexpr-data-member-location ^M warning: Section .debug_names in locexpr-data-member-location-lib.so has \ abbreviation_table of size 1 vs. written as 37, ignoring .debug_names.^M ... Using a patch that fixes PR28261, the warning is gone, but we run into: ... FAIL: gdb.dwarf2/locexpr-data-member-location.exp: step into foo ... This is due a missing .debug_aranges contribution for the CU declared in gdb.dwarf2/locexpr-data-member-location.exp. Fix this by adding the missing .debug_aranges contribution. Tested on x86_64-linux. 2021-09-14 Claudiu Zissulescu arc: Fix potential invalid pointer access when fixing got symbols. When statically linking, it can arrive to an undefined weak symbol of which its value cannot be determined. However, we are having pieces of code which doesn't take this situation into account, leading to access a structure which may not be initialized. Fix this situation and add a test. bfd/ xxxx-xx-xx Cupertino Miranda Claudiu Zissulescu * arc-got.h (arc_static_sym_data): New structure. (get_static_sym_data): New function. (relocate_fix_got_relocs_for_got_info): Move the computation fo symbol value and section to above introduced function, and use this new function. ld/testsuite/ xxxx-xx-xx Claudiu Zissulescu * ld-arc/got-weak.d: New file. * ld-arc/got-weak.s: Likewise. fix 2021-09-14 Mike Frysinger sim: bfin: add support for SDL2 This probably should have been ported long ago, but better late than never. We keep support for both versions for now since both projects tend to have long lifetimes. Maybe consider dropping SDL1 in another ten years. 2021-09-14 GDB Administrator Automatic date update in version.in 2021-09-14 Tom Tromey Remove use of __CYGNUSCLIB__ I found a check of __CYGNUSCLIB__ in dbxread.c. I think this is dead code. This patch removes it. 2021-09-13 Tom de Vries [gdb/testsuite] Check for valid test name When running gdb.base/batch-exit-status.exp I noticed that the test name contains a newline: ... PASS: gdb.base/batch-exit-status.exp: : No such file or directory\.^M : No such file or directory\.: [lindex $result 2] == 0 ... Check for this in ::CheckTestNames::check, such that we have a warning: ... PASS: gdb.base/batch-exit-status.exp: : No such file or directory\.^M : No such file or directory\.: [lindex $result 2] == 0 WARNING: Newline in test name ... Tested on x86_64-linux. 2021-09-13 Tom de Vries [gdb/tdep] Fix exec check in gdb_print_insn_arm With a gdb build with --enable-targets=all we run into a KFAIL: ... KFAIL: gdb.gdb/unittest.exp: executable loaded: maintenance selftest, \ failed none (PRMS: gdb/27891) ... due to: ... Running selftest print_one_insn.^M Self test failed: arch armv8.1-m.main: self-test failed at \ disasm-selftests.c:165^M ... The test fails because we expect disassembling of one arm insn to consume 4 bytes and produce (using verbose = true in disasm-selftests.c): ... arm mov r0, #0 ... but instead the disassembler uses thumb mode and only consumes 2 bytes and produces: ... arm movs r0, r0 ... The failure does not show up in the "no executable loaded" variant because this code in gdb_print_insn_arm isn't triggered: ... if (current_program_space->exec_bfd () != NULL) info->flags |= USER_SPECIFIED_MACHINE_TYPE; ... and consequently we do this in print_insn: ... if ((info->flags & USER_SPECIFIED_MACHINE_TYPE) == 0) info->mach = bfd_mach_arm_unknown; ... and don't set force_thumb to true in select_arm_features. The code in gdb_print_insn_arm makes the assumption that the disassembly architecture matches the exec architecture, which in this case is incorrect, because the exec architecture is x86_64, and the disassembly architecture is armv8.1-m.main. Fix that by explicitly checking it: ... if (current_program_space->exec_bfd () != NULL && (current_program_space->exec_bfd ()->arch_info == gdbarch_bfd_arch_info (gdbarch))) ... This fixes the print_one_insn failure, so remove the KFAIL. Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27891 2021-09-13 Tom de Vries [gdb/tdep] Reset force_thumb in parse_arm_disassembler_options With a gdb build with --enable-targets=all, we have 2 arch-specific failures in selftest print_one_insn: ... $ gdb -q -batch a.out -ex "maint selftest print_one_insn" 2>&1 \ | grep "Self test failed: arch " Self test failed: arch armv8.1-m.main: self-test failed at \ disasm-selftests.c:165 Self test failed: arch arm_any: self-test failed at disasm-selftests.c:165 $ ... During the first failed test, force_thumb is set to true, and remains so until and during the second test, which causes the second failure. Fix this by resetting force_thumb to false in parse_arm_disassembler_options, such that we get just one failure: ... $ gdb -q -batch a.out -ex "maint selftest print_one_insn" 2>&1 \ | grep "Self test failed: arch " Self test failed: arch armv8.1-m.main: self-test failed at \ disasm-selftests.c:165 $ ... Tested on x86_64-linux. 2021-09-13 Tom Tromey Fix no-Python build A build without Python will currently fail, because selftests::test_python uses gdb_python_initialized, which is only conditionally defined. This patch fixes the build by making test_python also be conditionally defined. I chose this approach because the selftest will fail if Python is not enabled, so it didn't seem useful to leave it defined. 2021-09-13 Nelson Chu RISC-V: Update the assembler insn testcase. Since the 0x57 is preserved for the vadd.vv instruction in the integration branch, remove it to make sure the testcase can work. gas/ * testsuite/gas/riscv/insn.d: Remove 0x57 since it is preserved for vadd.vv instruction. * testsuite/gas/riscv/insn.s: Likewise. 2021-09-13 Jan Beulich MIPS: don't use get_symbol_name() for section parsing. With s_change_section() later calling obj_elf_section(), it seems better to pre-parse the section name by the same function that will be used there. This way no differences in what is accepted will result. gas * config/tc-mips.c (s_change_section): Use obj_elf_section_name to parse the section name. ia64: don't use get_symbol_name() for section parsing. With cross_section() later calling obj_elf_section(), it seems better to pre-parse the section name by the same function that will be used there. This way no differences in what is accepted will result. gas * config/tc-ia64.c (cross_section): Use obj_elf_section_name to parse the section name. 2021-09-13 Tom de Vries [gdb/testsuite] Fix gdb.gdb/selftest.exp With a gdb build with CFLAGS "-O2 -g -flto=auto", I run into: ... #7 gdb_main (args=0x7fffffffd220) at src/gdb/main.c:1368^M #8 main (argc=, argv=) at src/gdb/gdb.c:32^M (gdb) FAIL: gdb.gdb/selftest.exp: backtrace through signal handler ... which means that this regexp in proc test_with_self fails: ... -re "#0.*(read|poll).*in main \\(.*\\) at .*gdb\\.c.*$gdb_prompt $" { ... The problem is that gdb_main has been inlined into main, and consequently the backtrace uses: ... #x ... ... instead of ... #x
in ... ... Fix this by updating the regexp to not require "in" before " main". Tested on x86_64-linux. 2021-09-13 Alan Modra Re: Deprecate a.out support for NetBSD targets * config.bfd: Correct m68-*-*bsd* obsolete target match. 2021-09-13 Tom de Vries [gdb/testsuite] Fix test name in gdb.base/batch-exit-status.exp When running gdb.base/batch-exit-status.exp I noticed that the test name contains a newline: ... PASS: gdb.base/batch-exit-status.exp: : No such file or directory\.^M : No such file or directory\.: [lindex $result 2] == 0 ... The mistake is that I passed an output regexp argument to a parameter interpreted as testname prefix. Fix this by passing a testname prefix instead. Add support for checking output, to be able to handle the output regexp argument. Tested on x86_64-linux. 2021-09-13 GDB Administrator Automatic date update in version.in 2021-09-12 Tom de Vries [gdb/testsuite] Set sysroot earlier in local-board.exp When running test-case gdb.base/batch-exit-status.exp for native, it passes. But with target board cc-with-debug-names, we run into (added missing double quotes for clarity): ... builtin_spawn $build/gdb/testsuite/../../gdb/gdb -nw -nx \ -data-directory $build/gdb/testsuite/../data-directory \ -iex "set height 0" -iex "set width 0" -ex "set sysroot" -batch ""^M : No such file or directory.^M PASS: gdb.base/batch-exit-status.exp: \ : No such file or directory\.: [lindex $result 2] == 0 FAIL: gdb.base/batch-exit-status.exp: \ : No such file or directory\.: [lindex $result 3] == $expect_status ... The difference between the passing and failing case is that with native we have (leaving out set height/width for brevity): ... $ gdb -batch ""; echo $? : No such file or directory. 1 ... and with target board cc-with-debug-names: ... $ gdb -ex "set sysroot" -batch ""; echo $? : No such file or directory. 0 ... The difference is expected. GDB returns the exit status of the last executed command. In the former case that's 'file ""', which fails. In the latter case, that's 'set sysroot', which succeeds. Fix this by setting sysroot using -iex instead of -ex in local-board.exp, such that we have the expected: ... $ gdb -iex "set sysroot" -batch ""; echo $? : No such file or directory. 1 ... Tested on x86_64-linux. 2021-09-12 GDB Administrator Automatic date update in version.in 2021-09-11 Mike Frysinger sim: run: change help short option to -h It's unclear why -H was picked over the more standard -h, but since -h is still not used, just change -H to -h to match pretty much every other tool in the sourceware tree. 2021-09-11 GDB Administrator Automatic date update in version.in 2021-09-10 Tom de Vries [gdb/testsuite] Reimplement gdb.gdb/python-selftest.exp as unittest The test-case gdb.gdb/python-selftest.exp: - patches the gdb_python_initialized variable in gdb to 0 - checks that the output of a python command is "Python not initialized" Reimplement gdb.gdb/python-selftest.exp as unittest, using: - execute_command_to_string to capture the output - try/catch to catch the "Python not initialized" exception. Tested on x86_64-linux. 2021-09-10 Tom de Vries [gdb/testsuite] Fix DUPLICATE in gdb.base/global-var-nested-by-dso.exp Fix DUPLICATE in gdb.base/global-var-nested-by-dso.exp by naming commands more uniquely. 2021-09-10 Tom de Vries [gdb/testsuite] Fix DUPLICATE in gdb.base/skip-solib.exp Fix DUPLICATE in gdb.base/skip-solib.exp by using with_test_prefix. Also fix indentation style and long lines, remove outdated question/answer bits, and use multi_line. 2021-09-10 Tom de Vries [gdb/testsuite] Fix handling of nr_args < 3 in mi_gdb_test The documentation of mi_gdb_test states that the command, pattern and message arguments are mandatory: ... # mi_gdb_test COMMAND PATTERN MESSAGE [IPATTERN] -- send a command to gdb; # test the result. ... However, this is not checked, and when mi_gdb_test is called with less than 3 arguments, it passes or fails silently. Fix this by using the following semantics: - if there are 1 or 2 arguments, use the command as the message. - if there is 1 argument, use ".*" as the pattern. - if there are no or too much arguments, error out. Fix a PATH issue in gdb.mi/mi-logging.exp, introduced by using the command as message. Fix a few other trivial-looking FAILs. There are 11 less trivial-looking FAILs left in gdb.mi in test-cases: - mi-nsmoribund.exp - mi-breakpoint-changed.exp - mi-break.exp. Tested on x86_64-linux. 2021-09-10 Tom de Vries [gdb/testsuite] Add string_list_to_regexp A regexp pattern with escapes like this is hard to read: ... set re "~\"\[$\]$decimal = 1\\\\n\"\r\n\\^done" ... We can make it more readable by spacing out parts (which allows us to also use the curly braces where that's convenient): ... set re [list "~" {"} {[$]} $decimal " = 1" "\\\\" "n" {"} "\r\n" "\\^" "done"] set re [join $re ""] ... or by using string_to_regexp: ... set re [list \ [string_to_regexp {~"$}] \ $decimal \ [string_to_regexp " = 1\\n\"\r\n^done"]] set re [join $re ""] ... Note: we have to avoid applying string_to_list to decimal, which is already a regexp. Add a proc string_list_to_regexp to make it easy to do both: ... set re [list \ [string_list_to_regexp ~ {"} $] \ $decimal \ [string_list_to_regexp " = 1" \\ n {"} \r\n ^ done]] ... Also add a test-case gdb.testsuite/string_to_regexp.exp. 2021-09-10 Tom de Vries [gdb/testsuite] Handle unrecognized command line option in gdb_compile_test When running the gdb testsuite with gnatmake-4.8, I get many fails of the following form: ... gcc: error: unrecognized command line option '-fgnat-encodings=all'^M gnatmake: "gdb.ada/O2_float_param/foo.adb" compilation error^M compiler exited with status 1 compilation failed: gcc ... gdb.ada/O2_float_param/foo.adb gcc: error: unrecognized command line option '-fgnat-encodings=all' gnatmake: "gdb.ada/O2_float_param/foo.adb" compilation error FAIL: gdb.ada/O2_float_param.exp: scenario=all: compilation foo.adb ... Fix this by marking the test unsupported instead, such that we have: ... UNSUPPORTED: gdb.ada/O2_float_param.exp: scenario=all: compilation foo.adb \ (unsupported option '-fgnat-encodings=all') ... Tested on x86_64-linux. 2021-09-10 Alan Modra PowerPC, sanity check r_offset in relocate_section * elf32-ppc.c (offset_in_range): New function. (ppc_elf_vle_split16): Sanity check r_offset before accessing section contents. Return status. (ppc_elf_relocate_section): Sanity check r_offset before accessing section contents. Don't segfault on NULL howto. Re: gas: Use the directory name in .file 0 PR gas/28266 * testsuite/gas/elf/dwarf-5-file0-2.s: Use %object rather than @object, .4byte instead of .long, and .asciz instead of .string. 2021-09-10 Mike Frysinger etc: switch to automake There's no content in here currently, so switching to automake is pretty easy with a stub file. etc: rename configure.in to configure.ac The .in name has been deprecated for a long time in favor of .ac. 2021-09-10 H.J. Lu gas: Use the directory name in .file 0 DWARF5 allows .file 0 to take an optional directory name. Set the entry 0 of the directory table to the directory name in .file 0. PR gas/28266 * dwarf2dbg.c (get_directory_table_entry): Add an argument for the directory name in .file 0 and use it, instead of PWD. (allocate_filenum): Pass NULL to get_directory_table_entry. (allocate_filename_to_slot): Pass the incoming dirname to get_directory_table_entry. * testsuite/gas/elf/dwarf-5-file0-2.d: New file. * testsuite/gas/elf/dwarf-5-file0-2.s: Likewise. * testsuite/gas/elf/elf.exp: Run dwarf-5-file0-2. 2021-09-10 GDB Administrator Automatic date update in version.in 2021-09-09 Yoshinori Sato gdb: Enable target rx-*-*linux. I added rx-*-linux in binutils few yaers ago. But missing this changes, 2021-09-09 Tom de Vries [gdb/testsuite] Fix gdb.base/coredump-filter-build-id.exp with older eu-unstrip On openSUSE Leap 42.3 with eu-unstrip 0.158, we run into: ... (gdb) PASS: gdb.base/coredump-filter-build-id.exp: save corefile First line of eu-unstrip: \ 0x400000+0x202000 f4ae8502bd6a14770182382316bc595e9dc6f08b@0x400284 - - [exe] FAIL: gdb.base/coredump-filter-build-id.exp: gcore dumped mapping with build-id ... The test expects an actual file name instead of '[exe]', but that only got introduced with eu-unstrip 0.161. Before it printed '[exe]' or '[pie]'. Fix this by updating the regexp. Tested on x86_64-linux. 2021-09-09 Tom de Vries [gdb/testsuite] Fix various issues in gdb.mi/mi-sym-info.exp I noticed this failure in gdb.mi/mi-sym-info.exp with gcc-4.8: ... FAIL: gdb.mi/mi-sym-info.exp: -symbol-info-functions --max-results 1 \ (unexpected output) ... due to function f2 instead of f3 being listed. AFAICT, this is caused by a difference in debug info: ... $ readelf -wi outputs/gdb.mi/mi-sym-info/mi-sym-info1.o \ | egrep "DW_AT_name.*: f[1-3]" <72> DW_AT_name : f1 DW_AT_name : f2 DW_AT_name : f3 ... vs: ... $ readelf -wi outputs/gdb.mi/mi-sym-info/mi-sym-info1.o \ | egrep "DW_AT_name.*: f[1-3]" DW_AT_name : f3 <123> DW_AT_name : f2 <152> DW_AT_name : f1 ... and the command documentation does not mention an imposed order, so fix this by allowing f2 as well. Doing this fix, it made sense to do a refactoring of adding f2_re and f3_re variables, in order to write (?:$f2_re|$f3_re), and I applied the same pattern overall. Furthermore, I found a silent FAIL due to calling mi_gdb_proc with 2 args, fix by updating the regexp. Then I ran with clang and found another FAIL, fix by updating the regexp. Tested on x86_64-linux with gcc-4.8.5, gcc-7.5.0, gcc-11.2.1, clang-7.0.1 and clang-12.0.1. 2021-09-09 Tom de Vries [gdb/testsuite] Reimplement gdb.gdb/complaints.exp as unittest When building gdb with "-Wall -O2 -g -flto=auto", I run into: ... (gdb) call clear_complaints()^M No symbol "clear_complaints" in current context.^M (gdb) FAIL: gdb.gdb/complaints.exp: clear complaints ... The problem is that lto has optimized away the clear_complaints function and consequently the selftest doesn't work. Fix this by reimplementing the selftest as a unit test. Factor out two new functions: - void execute_fn_to_ui_file (struct ui_file *file, std::function fn); - std::string execute_fn_to_string (std::function fn, bool term_out); and use the latter to capture the complaints output. Tested on x86_64-linux. 2021-09-09 Andrew Burgess gdb/python: remove all uses of Py_TPFLAGS_HAVE_ITER Python 2 has a bit flag Py_TPFLAGS_HAVE_ITER which can be passed as part of the tp_flags field when defining a new object type. This flag is not defined in Python 3 and so we define it to 0 in python-internal.h (when IS_PY3K is defined). The meaning of this flag is that the object has the fields tp_iter and tp_iternext. Note the use of "has" here, the flag says nothing about the values in those fields, just that the type object has the fields. In early versions of Python 2 these fields were no part of the PyTypeObject struct, they were added in version 2.2 (see https://docs.python.org/release/2.3/api/type-structs.html). And so, there could be a some code compiled out there which has a PyTypeObject structure within it that doesn't even have the tp_iter and tp_iternext fields, attempting to access these fields would be undefined behaviour. And so Python added the Py_TPFLAGS_HAVE_ITER flag. If the flag is present then Python is free to access the tp_iter and tp_iternext fields. If we consider GDB then we always assume that the tp_iter and tp_iternext fields are part of PyTypeObject. If someone was crazy enough to try and compile GDB against Python 2.1 then we'd get lots of build errors saying that we were passing too many fields when initializing PyTypeObject structures. And so, I claim, we can be sure that GDB will always be compiled with a version of Python that has the tp_iter and tp_iternext fields in PyTypeObject. Next we can look at the Py_TPFLAGS_DEFAULT flag. In Python 2, each time additional fields are added to PyTypeObject a new Py_TPFLAGS_* flag would be defined to indicate whether those flags are present or not. And, those new flags would be added to Py_TPFLAGS_DEFAULT. And so, in the latest version of Python 2 the Py_TPFLAGS_DEFAULT flag includes Py_TPFLAGS_HAVE_ITER (see https://docs.python.org/2.7/c-api/typeobj.html). In GDB we pass Py_TPFLAGS_DEFAULT as part of the tp_flags for all objects we define. And so, in this commit, I propose to remove all uses of Py_TPFLAGS_HAVE_ITER from GDB, it's simply not needed. There should be no user visible changes after this commit. 2021-09-09 Mike Frysinger sim: accept -EB/-EL short options Many GNU tools accept -EB/-EL as short options for selecting big & little endian modes. While the sim has an -E option, it requires spelling out "big" and "little". Adding support for -EB & -EL is thus quite trivial, so lets round it out to be less annoying. sim: ppc: drop support for std-config.h overrides Only the ppc arch supports this kind of source file override logic. All the others expose knobs via configure flags, and for some of these, the ppc code does as well. For others, it doesn't make sense to ever change them. Since it's unlikely anyone is using this, drop it all to simplify the code (and to get us a little closer to the common sim code). sim: ppc: enable use of gnulib All other sim arches are using this now, so finish up the logic in the ppc arch to enable gnulib usage here too. sim: drop old O_NDELAY & FNBLOCK support We use these older names inconsistently in the sim codebase, and time has moved on long ago, so drop support for these non-standard names. POSIX provides O_NONBLOCK for us, so use it everywhere. 2021-09-09 Mike Frysinger sim: dv-sockser: enable for mingw targets too We have enough functionality from gnulib now to build sockser on all platforms. Non-blocking I/O is supported when F_GETFL/F_SETFL are unavailable, but we can address that in a follow up commit. This mirrors what is done in other places in the sim already. 2021-09-09 Mike Frysinger sim: cgen: workaround Windows VOID define The cgen framework provides a "VOID" type for code to use, but this defines ends up conflicting with the standard Windows VOID define. Since they actually define to the same thing ("void"), undef it here to fix the Windows build. We might want to reconsider the need for "VOID" in cgen, but that will take larger discussion & coordination with the cgen project. 2021-09-09 Mike Frysinger sim: dv-sockser: move sim-main.h include after system includes The sim-main.h header is a bit of a dumping ground. Every arch can (and many do) define all sorts of weird & common names that end up conflicting with system headers. So including it before the system headers sets us up for pain. v850 is a good example of this -- when building for mingw, we see weird failures: $ i686-w64-mingw32-gcc ... -c -o dv-sockser.o ../../../../sim/v850/../common/dv-sockser.c In file included from ../../../../sim/v850/sim-main.h:11, from ../../../../sim/v850/../common/dv-sockser.c:24: ../../../../sim/v850/../common/sim-base.h:97:32: error: expected ')' before '->' token 97 | # define STATE_CPU(sd, n) ((sd)->cpu[0]) | ^~ While gcc is unhelpful at first, running it through the preprocessor by hand shows more details: $ i686-w64-mingw32-gcc ... -E -dD -o dv-sockser.i ../../../../sim/v850/../common/dv-sockser.c $ i686-w64-mingw32-gcc -c dv-sockser.i In file included from /usr/i686-w64-mingw32/usr/include/minwindef.h:163, from /usr/i686-w64-mingw32/usr/include/windef.h:9, from /usr/i686-w64-mingw32/usr/include/windows.h:69, from /usr/i686-w64-mingw32/usr/include/winsock2.h:23, from ../../gnulib/import/sys/socket.h:684, from ../../gnulib/import/netinet/in.h:43, from ../../../../sim/v850/../common/dv-sockser.c:39: /usr/i686-w64-mingw32/usr/include/winnt.h:4803:25: error: expected ')' before '->' token 4803 | DWORD State; | ^ | ) This is because v850 sets up this common name: All of this needs cleaning up someday, but since the dv-sockser code definitely should be fixed in this way, lets do that now and unblock the v850 code. 2021-09-09 Mike Frysinger sim: mips: delete unused PSIZE define It's unclear what this define is for as it appears to be unused, and has never been used in the history of the mips sim. Delete it to tidy up, and to fix build errors for Windows targets that have a standard "PSIZE" struct in their system headers. This doesn't show up yet as most sim files don't include many system headers, but enabling sockser code for mingw uncovers the conflict. Unfortunately the error produced by gcc is inscrutable, but running it through the preprocessor manually manages to provide a pointer to the underlying issue. $ i686-w64-mingw32-gcc ... -c -o dv-sockser.o ../../../../sim/mips/../common/dv-sockser.c : error: expected identifier or '(' before numeric constant In file included from /usr/i686-w64-mingw32/usr/include/windows.h:71, from /usr/i686-w64-mingw32/usr/include/winsock2.h:23, from ../../gnulib/import/sys/socket.h:684, from ../../gnulib/import/netinet/in.h:43, from ../../../../sim/mips/../common/dv-sockser.c:39: /usr/i686-w64-mingw32/usr/include/wingdi.h:2934:59: error: unknown type name 'LPSIZE'; did you mean 'LPSIZEL'? 2934 | WINGDIAPI WINBOOL WINAPI GetAspectRatioFilterEx(HDC hdc,LPSIZE lpsize); | ^~~~~~ | LPSIZEL ... $ i686-w64-mingw32-gcc ... -E -dD -o dv-sockser.i ../../../../sim/mips/../common/dv-sockser.c $ i686-w64-mingw32-gcc -c dv-sockser.i In file included from /usr/i686-w64-mingw32/usr/include/windows.h:69, from /usr/i686-w64-mingw32/usr/include/winsock2.h:23, from ../../gnulib/import/sys/socket.h:684, from ../../gnulib/import/netinet/in.h:43, from ../../../../sim/mips/../common/dv-sockser.c:39: /usr/i686-w64-mingw32/usr/include/windef.h:104:9: error: expected identifier or '(' before numeric constant 104 | } SIZE,*PSIZE,*LPSIZE; | ^~ 2021-09-09 Mike Frysinger sim: ppc: switch to common warning flags Now that the ppc code has been cleaned up enough to use the same set of warning flags as the common code, delete the ppc-specific configure logic so we can leverage what the common code already defined for us. 2021-09-09 Tom de Vries sim: ppc: enable -Wpointer-sign warnings When compiling with --enable-werror and CFLAGS="-O0 -g -Wall", we run into: ... src/sim/ppc/hw_memory.c: In function 'hw_memory_init_address': src/sim/ppc/hw_memory.c:204:7: error: pointer targets in passing argument 4 \ of 'device_find_integer_array_property' differ in signedness \ [-Werror=pointer-sign] &new_chunk->size); ^ ... Fix these by adding an explicit pointer cast. It's a bit ugly to use APIs based on signed integers to read out unsigned values, but in practice, this is par for the course in the ppc code. We already use signed APIs and assign the result to unsigned values a lot: see how device_find_integer_property returns a signed integer (cell), but then assign it to unsigned types. The array APIs are not used that often which is why we don't see many warnings, and we disable warnings when we assign signed integers to unsigned integers in general. The dtc/libfdt project (which is the standard in other projects) processes the fdt blob as a series of bytes without any type information. Typing is left to the caller. They have core APIs that read/write bytes, and a few helper functions to cast/convert those bytes to the right value (e.g. u32). In this ppc sim code, the core APIs use signed integers, and the callers convert to unsigned, usually implicitly. We could add some core APIs to the ppc sim that deal with raw bytes and then add some helpers to convert to the right type, but that seems like a lot of lifting for what boils down to a cast, and is effectively equivalent to all the implicit assignments we use elsewhere. Long term, a lot of the ppc code should either get converted to existing sim common code, or we should stand up proper APIs in the common code first, or use standard libraries to do all the processing (e.g. libfdt). Either way, this device.c code would all get deleted, and callers (like these hw_*.c files) would get converted. Which is also why we go with a cast rather new (but largely unused) APIs. 2021-09-09 Mike Frysinger sim: ppc: enable -Wmissing-declarations & -Wmissing-prototypes This aligns with common code which already uses this flag. We have to add another local prototype to fix the failure, and add another local decl for the SIM_DESC type. Unwinding these will require a lot more work & conversions in the process, so going with the decl for now unblocks the warning unification. 2021-09-09 Mike Frysinger sim: microblaze: replace custom basic types with common ones The basic "byte" type conflicts with Windows headers, and we already have common types that provide the right sizes. So replace these with the common ones to avoid issues. CC dv-sockser.o In file included from /usr/i686-w64-mingw32/usr/include/wtypes.h:8, from /usr/i686-w64-mingw32/usr/include/winscard.h:10, from /usr/i686-w64-mingw32/usr/include/windows.h:97, from /usr/i686-w64-mingw32/usr/include/winsock2.h:23, from ../../gnulib/import/sys/socket.h:684, from ../../gnulib/import/netinet/in.h:43, from .../build/sim/../../../sim/microblaze/../common/dv-sockser.c:39: /usr/i686-w64-mingw32/usr/include/rpcndr.h:63:25: error: conflicting types for 'byte'; have 'unsigned char' 63 | typedef unsigned char byte; | ^~~~ In file included from .../buildsim/../../../sim/microblaze/sim-main.h:21, from .../buildsim/../../../sim/microblaze/../common/dv-sockser.c:24: .../buildsim/../../../sim/microblaze/microblaze.h:94:25: note: previous declaration of 'byte' with type 'byte' {aka 'char'} 94 | typedef char byte; | ^~~~ make: *** [Makefile:513: dv-sockser.o] Error 1 2021-09-09 Jim Wilson RISC-V: Pretty print values formed with lui and addiw. The disassembler has support to pretty print values created by an lui/addi pair, but there is no support for addiw. There is also no support for c.addi and c.addiw. This patch extends the pretty printing support to handle these 3 instructions in addition to addi. Existing testcases serve as tests for the new feature. opcodes/ * riscv-dis.c (maybe_print_address): New arg wide. Sign extend when wide is true. (print_insn_args): Fix calls to maybe_print_address. Add checks for c.addi, c.addiw, and addiw, and call maybe_print_address for them. gas/ * testsuite/gas/riscv/insn.d: Update for disassembler change. * testsuite/gas/li32.d, testsuite/gas/li64.d: Likwise. * testsuite/gas/lla64.d: Likewise. 2021-09-09 Mike Frysinger sim: ppc: align format string settings with common code This copies logic used in the common sim warning configure code to fix build errors for mingw targets. Turning format warnings on triggers a failure in the debug.c file, so apply a minor fix at the same time. sim: ppc: drop unnecessary config includes This file is compiled for the --host & --build system which leads to including the configure generated config.h in both environments. This obviously doesn't work when the two targets don't look alike at all and can cause build failures here (e.g. a mingw host & a linux build). Since we don't actually need any config settings in this very simple file, drop the includes entirely. 2021-09-09 GDB Administrator Automatic date update in version.in 2021-09-08 Mike Frysinger gnulib: import various network functions Some sim ports use these to provide networking functionality via the dv-sockser module or via direct emulation for a few ports. Gdb seems to build just fine still too. 2021-09-08 Tom Tromey Fix unit test build on Windows Like Tom de Vries' earlier patch to fix the no-CXX_STD_THREAD case in maint.c, this patch fixes a similar problem in parallel-for-selftests.c. This fixes a build failure on Windows. 2021-09-08 Alan Modra PowerPC64, sanity check r_offset in relocate_section This hardens the powerpc64 linker code transformations. * elf64-ppc.c (is_8byte_reloc, offset_in_range): New functions. (ppc64_elf_relocate_section): Sanity check r_offset before accessing section contents for various code transformations. 2021-09-08 Alan Modra PowerPC64: Avoid useless work on R_PPC64_TPREL34 _bfd_elf_ppc_at_tprel_transform doesn't handle prefix instructions, and I'm not inclined to implement code editing for them. * elf64-ppc.c (ppc64_elf_relocate_section): Don't attempt tprel transform for R_PPC64_TPREL34. 2021-09-08 Andrew Burgess gdb: make thread_suspend_state::stop_pc optional Currently the stop_pc field of thread_suspect_state is a CORE_ADDR and when we want to indicate that there is no stop_pc available we set this field back to a special value. There are actually two special values used, in post_create_inferior the stop_pc is set to 0. This is a little unfortunate, there are plenty of embedded targets where 0 is a valid pc value. The more common special value for stop_pc though, is set in thread_info::set_executing, where the value (~(CORE_ADDR) 0) is used. This commit changes things so that the stop_pc is instead a gdb::optional. We can now explicitly reset the field to an uninitialised state, we also have asserts that we don't read the stop_pc when its in an uninitialised state (both in gdbsupport/gdb_optional.h, when compiling with _GLIBCXX_DEBUG defined, and in thread_info::stop_pc). One situation where a thread will not have a stop_pc value is when the thread is stopped as a consequence of GDB being in all stop mode, and some other thread stopped at an interesting event. When GDB brings all the other threads to a stop those other threads will not have a stop_pc set (thus avoiding an unnecessary read of the pc register). Previously, when GDB passed through handle_one (in infrun.c) the threads executing flag was set to false and the stop_pc field was left unchanged, i.e. it would (previous) have been left as ~0. Now, handle_one leaves the stop_pc with no value. This caused a problem when we later try to set these threads running again, in proceed() we compare the current pc with the cached stop_pc. If the thread was stopped via handle_one then the stop_pc would have been left as ~0, and the compare (in proceed) would (likely) fail. Now however, this compare tries to read the stop_pc when it has no value and this would trigger an assert. To resolve this I've added thread_info::stop_pc_p() which returns true if the thread has a cached stop_pc. We should only ever call thread_info::stop_pc() if we know that there is a cached stop_pc, however, this doesn't mean that every call to thread_info::stop_pc() needs to be guarded with a call to thread_info::stop_pc_p(), in most cases we know that the thread we are looking at stopped due to some interesting event in that thread, and so, we know that the stop_pc is valid. After running the testsuite I've seen no other situations where stop_pc is read uninitialised. There should be no user visible changes after this commit. 2021-09-08 Tom de Vries [gdb/build] Fix build with undefined CXX_STD_THREAD When building gdb on openSUSE Leap 42.3, we trigger the case that CXX_STD_THREAD is undefined, and run into: ... gdb/maint.c: In function 'void maintenance_show_worker_threads \ (ui_file*, int, cmd_list_element*, const char*)': gdb/maint.c:877:14: error: 'gdb::thread_pool' has not been declared gdb::thread_pool::g_thread_pool->thread_count ()); ^ Makefile:1647: recipe for target 'maint.o' failed make[1]: *** [maint.o] Error 1 ... Fix this by handling the undefined CXX_STD_THREAD case in maintenance_show_worker_threads, such that we get: ... $ gdb -q -batch -ex "maint show worker-thread" The number of worker threads GDB can use is 0. ... Tested on x86_64-linux. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28312 2021-09-08 Mike Frysinger sim: update configure target list Fix sorting of the list, and update the globs to match the list used in gdb's configure script. gdb: cris: enable sim integration The sim side is already ready to go for cris, so wire it up. gdb: aarch64: enable sim integration The sim side is already ready to go for aarch64, so wire it up. gdb: sim: consolidate configure settings Moving all the sim settings to one section makes it easier to track, and makes it easier to keep it aligned with the sim target tests. The gdb logic was duplicating this when handling different OS targets instead of having a single cpu check. Now it's more obvious that the sim is tied to a cpu and not related to the OS. 2021-09-08 GDB Administrator Automatic date update in version.in 2021-09-07 Tom Tromey Remove unused declaration from gdbserver/win32-low.h I noticed that gdbserver/win32-low.h has an unused declaration. This code was changed a while ago, but this declaration slipped through. This patch removes it. Tested by rebuilding. 2021-09-07 Andrew Burgess gdb: make use of std::string in utils.c Replace some of the manual string management (malloc/free) with std::string when creating commands in utils.c. Things are a little bit messy as, creating the prefix commands (using add_basic_prefix_cmd and add_show_prefix_cmd), doesn't copy the doc string, while creating the actual set/show commands (using add_setshow_enum_cmd) does copy the doc string. As a result, I have retained the use of xstrprintf when creating the prefix command doc strings, but switched to using std::string when creating the actual set/show commands. There should be no user visible changes after this commit. 2021-09-07 Luis Machado Revert: [AArch64] MTE corefile support bfd * elf.c (elfcore_make_memtag_note_section): New function. (elfcore_grok_note): Handle NT_MEMTAG note types. binutils* readelf.c (get_note_type): Handle NT_MEMTAG note types. include * elf/common.h (NT_MEMTAG): New constant. (NT_MEMTAG_TYPE_AARCH_MTE): New constant. 2021-09-07 Andrew Burgess gdb: use bool instead of int in struct internal_problem Change struct internal_problem (gdb/utils.c) to use bool instead of int, update the 3 static instances of this structure that we create to use true/false instead of 1/0. I've also updated the comments on struct internal_problem as the existing comment doesn't seem to be referring to the structure, it talks about returning something, which doesn't make sense in this context. There should be no user visible changes after this commit. 2021-09-07 Andrew Burgess gdb: make thread_info::executing private Rename thread_info::executing to thread_info::m_executing, and make it private. Add a new get/set member functions, and convert GDB to make use of these. The only real change of interest in this patch is in thread.c where I have deleted the helper function set_executing_thread, and now just use the new set function thread_info::set_executing. However, the old helper function set_executing_thread included some code to reset the thread's stop_pc, so I moved this code into the new function thread_info::set_executing. However, I don't believe there is anywhere that this results in a change of behaviour, previously the executing flag was always set true through a call to set_executing_thread anyway. 2021-09-07 Nick Clifton Fix an illegal memory access triggered by an atempt to disassemble a corrupt xtensa binary. PR 28305 * elf32-xtensa.c (elf_xtensa_do_reloc): Add check for put of range reloc. 2021-09-07 Andrew Burgess gdb/python: new function to add values into GDB's history The guile API has (history-append! ) to add values into GDB's history list. There is currently no equivalent in the Python API. This commit adds gdb.add_history() to the Python API, this function takes a gdb.Value (or anything that can be passed to the constructor of gdb.Value), and adds the value it represents to GDB's history list. The index of the newly added value is returned. 2021-09-07 Nick Clifton Fix illegal memory access triggered by an attempt to disassemble a corrupt RISC-V binary. PR 28303 * elfxx-riscv.c (riscv_elf_add_sub_reloc): Add check for out of range relocs. 2021-09-07 Tom de Vries [gdb/testsuite] Handle internal-error in gdb_unload When reverting commit 5a20fadc841 and using gdb_unload instead of runto "bar" to trigger the internal-error in test-case gdb.dwarf2/locexpr-data-member-location.exp, we run into: ... ERROR: couldn't unload file in $gdb (timeout). ... and the test-case takes about 1 minute. Fix this by handling internal-error in gdb_unload, such that we have: ... ERROR: Couldn't unload file in $gdb (GDB internal error). ERROR: Could not resync from internal error (eof) ... within 2 seconds. Tested on x86_64-linux. 2021-09-07 Alan Modra PR28307, segfault in ppc64_elf_toc64_reloc Adds missing bfd_reloc_offset_in_range checks to various relocation special_functions. PR 28307 * elf32-ppc.c (ppc_elf_addr16_ha_reloc): Range check reloc offset. * elf64-ppc.c (ppc64_elf_ha_reloc, ppc64_elf_brtaken_reloc): Likewise. (ppc64_elf_toc64_reloc, ppc64_elf_prefix_reloc): Likewise. 2021-09-07 GDB Administrator Automatic date update in version.in 2021-09-07 Tom de Vries [gdb/testsuite] Handle internal-error in gdb_run_cmd When reverting commit 5a20fadc841 the test-case gdb.dwarf2/locexpr-data-member-location.exp fails like this: ... FAIL: gdb.dwarf2/locexpr-data-member-location.exp: running to bar in runto \ (GDB internal error) ERROR: Could not resync from internal error (eof) ... and takes 1 minute to run. The long running time is caused by running into a timeout in gdb_run_cmd, at this point: ... (gdb) run ^M The program being debugged has been started already.^M Start it from the beginning? (y or n) y^M /home/vries/gdb_versions/devel/src/gdb/gdbtypes.c:5583: internal-error: \ Unexpected type field location kind: 4^M A problem internal to GDB has been detected,^M further debugging may prove unreliable.^M Quit this debugging session? (y or n) ... Fix this by detecting the internal-error in gdb_run_cmd. We don't handle it in gdb_run_cmd, but stash the gdb output back into the buffer using -notransfer, and let the caller proc runto deal with it. After the fix, the test-case just takes 2 seconds. Tested on x86_64-linux. 2021-09-06 Lancelot SIX gdb: rename gdb/testsuite/gdb.arch/riscv64-unwind-prologue-with-ld-lw.c A previous commit added the gdb.arch/riscv64-unwind-prologue-with-ld-lw.exp testcase, but one of its associated file was named after a previous version of the test. This commit fixes this and makes sure that all the files linked to this testcase share the same prefix in the name. Tested on riscv64 GNU/Linux. 2021-09-06 Tom de Vries [gdb/testsuite] Handle eof in gdb_internal_error_resync Before commit 5a20fadc841 the test-case gdb.dwarf2/locexpr-data-member-location.exp fails like this: ... FAIL: gdb.dwarf2/locexpr-data-member-location.exp: running to bar in runto \ (GDB internal error) ERROR: : spawn id exp9 not open while executing "expect { -i exp9 -timeout 10 -re "Quit this debugging session\\? \\(y or n\\) $" { send_gdb "n\n" answer incr count } -re "Create ..." ("uplevel" body line 1) invoked from within "uplevel $body" NONE : spawn id exp9 not open ERROR: Could not resync from internal error (timeout) ... Fix the: ... ERROR: : spawn id exp9 not open ... by handling eof in gdb_internal_error_resync, such that we have instead: ... FAIL: gdb.dwarf2/locexpr-data-member-location.exp: running to bar in runto \ (GDB internal error) ERROR: Could not resync from internal error (eof) ... Tested on x86_64-linux. 2021-09-06 Tom Tromey Remove some complaints.h includes There are a few includes of complaints.h that aren't necessary. This patch removes them. Tested by rebuilding. 2021-09-06 Nick Clifton Fix an illegal memory access triggered by disassembling corrupt s390x binaries. PR 28304 * elfxx-score7.c (score_elf_gprel15_reloc): If there is no output bfd treat the reloc as undefined. Fix potential use on an uninitialised vairable in the MCore assembler. Fix potential uninitialised variable in microblaze assembler code. 2021-09-06 Yinjun Zhang Add a sanity check to the init_nfp6000_mecsr_sec() function in the NFP disassembler. 2021-09-06 Alexandra Hájková gdbtypes.c: Add the case for FIELD_LOC_KIND_DWARF_BLOCK The case for FIELD_LOC_KIND_DWARF_BLOCK was missing for switch TYPE_FIELD_LOC_KIND. Thas caused an internal-error under some circumstances. Fixes bug 28030. 2021-09-06 GDB Administrator Automatic date update in version.in 2021-09-05 GDB Administrator Automatic date update in version.in 2021-09-04 Tom de Vries [gdb/testsuite] Check avx support in gdb.arch/amd64-disp-step-avx.exp On a machine on Open Build Service I'm running into a SIGILL for test-case gdb.arch/amd64-disp-step-avx.exp: ... Program received signal SIGILL, Illegal instruction.^M test_rip_vex2 () at gdb.arch/amd64-disp-step-avx.S:40^M 40 vmovsd ro_var(%rip),%xmm0^M (gdb) FAIL: gdb.arch/amd64-disp-step-avx.exp: vex2: \ continue to test_rip_vex2_end ... The SIGILL happens when trying to execute the first avx instruction in the executable. I can't directly access the machine, but looking at the log for test-case gdb.arch/i386-avx.exp, it seems that there's no avx support: ... Breakpoint 1, main (argc=1, argv=0x7fffffffd6b8) at gdb.arch/i386-avx.c:68^M 68 if (have_avx ())^M (gdb) print have_avx ()^M $1 = 0^M ... Fix this by: - adding a gdb_caching_proc have_avx, similar to have_mpx, using the have_avx function from gdb.arch/i386-avx.c - using proc have_avx in both gdb/testsuite/gdb.arch/amd64-disp-step-avx.exp and gdb/testsuite/gdb.arch/i386-avx.exp. Tested on my x86_64-linux laptop with avx support, where both test-cases pass. gdb/testsuite/ChangeLog: 2021-09-04 Tom de Vries PR testsuite/26950 * gdb/testsuite/gdb.arch/i386-avx.c (main): Remove call to have_avx. (have_avx): Move ... * gdb/testsuite/lib/gdb.exp (have_avx): ... here. New proc. * gdb/testsuite/gdb.arch/amd64-disp-step-avx.exp: Use have_avx. * gdb/testsuite/gdb.arch/i386-avx.exp: Same. 2021-09-04 Mike Frysinger gnulib: import sys_wait A few sims use this to emulate process syscalls. Gdb builds seem to still be fine. 2021-09-04 GDB Administrator Automatic date update in version.in 2021-09-03 Tom Tromey Use CORE_ADDR as return type from x86_dr_low_get_addr On a Windows build locally, watchpoints started failing. I tracked this down to x86_dr_low_get_addr returning an 'unsigned long'... in this particular build, this is a 32-bit type, but the inferior is a 64-bit program. This patch fixes the problem by changing the return type. No other change is required, because this matches the function pointer in struct x86_dr_low_type. 2021-09-03 Kevin Buettner Test case reproducing PR28030 bug The original reproducer for PR28030 required use of a specific compiler version - gcc-c++-11.1.1-3.fc34 is mentioned in the PR, though it seems probable that other gcc versions might also be able to reproduce the bug as well. This commit introduces a test case which, using the DWARF assembler, provides a reproducer which is independent of the compiler version. (Well, it'll work with whatever compilers the DWARF assembler works with.) To the best of my knowledge, it's also the first test case which uses the DWARF assembler to provide debug info for a shared object. That being the case, I provided more than the usual commentary which should allow this case to be used as a template when a combo shared library / DWARF assembler test case is required in the future. I provide some details regarding the bug in a comment near the beginning of locexpr-dml.exp. This problem was difficult to reproduce; I found myself constantly referring to the backtrace while trying to figure out what (else) I might be missing while trying to create a reproducer. Below is a partial backtrace which I include for posterity. #0 internal_error ( file=0xc50110 "/ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/gdbtypes.c", line=5575, fmt=0xc520c0 "Unexpected type field location kind: %d") at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdbsupport/errors.cc:51 #1 0x00000000006ef0c5 in copy_type_recursive (objfile=0x1635930, type=0x274c260, copied_types=0x30bb290) at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/gdbtypes.c:5575 #2 0x00000000006ef382 in copy_type_recursive (objfile=0x1635930, type=0x274ca10, copied_types=0x30bb290) at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/gdbtypes.c:5602 #3 0x0000000000a7409a in preserve_one_value (value=0x24269f0, objfile=0x1635930, copied_types=0x30bb290) at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/value.c:2529 #4 0x000000000072012a in gdbscm_preserve_values ( extlang=0xc55720 , objfile=0x1635930, copied_types=0x30bb290) at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/guile/scm-value.c:94 #5 0x00000000006a3f82 in preserve_ext_lang_values (objfile=0x1635930, copied_types=0x30bb290) at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/extension.c:568 #6 0x0000000000a7428d in preserve_values (objfile=0x1635930) at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/value.c:2579 #7 0x000000000082d514 in objfile::~objfile (this=0x1635930, __in_chrg=) at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/objfiles.c:549 #8 0x0000000000831cc8 in std::_Sp_counted_ptr::_M_dispose (this=0x1654580) at /usr/include/c++/11/bits/shared_ptr_base.h:348 #9 0x00000000004e6617 in std::_Sp_counted_base<(__gnu_cxx::_Lock_policy)2>::_M_release (this=0x1654580) at /usr/include/c++/11/bits/shared_ptr_base.h:168 #10 0x00000000004e1d2f in std::__shared_count<(__gnu_cxx::_Lock_policy)2>::~__shared_count (this=0x190bb88, __in_chrg=) at /usr/include/c++/11/bits/shared_ptr_base.h:705 #11 0x000000000082feee in std::__shared_ptr::~__shared_ptr (this=0x190bb80, __in_chrg=) at /usr/include/c++/11/bits/shared_ptr_base.h:1154 #12 0x000000000082ff0a in std::shared_ptr::~shared_ptr ( this=0x190bb80, __in_chrg=) at /usr/include/c++/11/bits/shared_ptr.h:122 #13 0x000000000085ed7e in __gnu_cxx::new_allocator > >::destroy > (this=0x114bc00, __p=0x190bb80) at /usr/include/c++/11/ext/new_allocator.h:168 #14 0x000000000085e88d in std::allocator_traits > > >::destroy > (__a=..., __p=0x190bb80) at /usr/include/c++/11/bits/alloc_traits.h:531 #15 0x000000000085e50c in std::__cxx11::list, std::allocator > >::_M_erase (this=0x114bc00, __position= std::shared_ptr (expired, weak count 1) = {get() = 0x1635930}) at /usr/include/c++/11/bits/stl_list.h:1925 #16 0x000000000085df0e in std::__cxx11::list, std::allocator > >::erase (this=0x114bc00, __position= std::shared_ptr (expired, weak count 1) = {get() = 0x1635930}) at /usr/include/c++/11/bits/list.tcc:158 #17 0x000000000085c748 in program_space::remove_objfile (this=0x114bbc0, objfile=0x1635930) at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/progspace.c:210 #18 0x000000000082d3ae in objfile::unlink (this=0x1635930) at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/objfiles.c:487 #19 0x000000000082e68c in objfile_purge_solibs () at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/objfiles.c:875 #20 0x000000000092dd37 in no_shared_libraries (ignored=0x0, from_tty=1) at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/solib.c:1236 #21 0x00000000009a37fe in target_pre_inferior (from_tty=1) at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/target.c:2496 #22 0x00000000007454d6 in run_command_1 (args=0x0, from_tty=1, run_how=RUN_NORMAL) at /ironwood1/sourceware-git/f34-pr28030/bld/../../worktree-pr28030/gdb/infcmd.c:437 I'll note a few points regarding this backtrace: Frame #1 is where the internal error occurs. It's caused by an unhandled case for FIELD_LOC_KIND_DWARF_BLOCK. The fix for this bug adds support for this case. Frame #22 - it's a partial backtrace - shows that GDB is attempting to (re)run the program. You can see the exact command sequence that was used for reproducing this problem in the PR (at https://sourceware.org/bugzilla/show_bug.cgi?id=28030), but in a nutshell, after starting the program and advancing to the appropriate source line, GDB was asked to step into libstdc++; a "finish" command was issued, returning a value. The fact that a value was returned is very important. GDB was then used to step back into libstdc++. A breakpoint was set on a source line in the library after which a "run" command was issued. Frame #19 shows a call to objfile_purge_solibs. It's aptly named. Frame #7 is a call to the destructor for one of the objfile solibs; it turned out to be the one for libstdc++. Frames #6 thru #3 show various value preservation frames. If you look at preserve_values() in gdb/value.c, the value history is preserved first, followed by internal variables, followed by values for the extension languages (python and guile). 2021-09-03 Tom de Vries [gdb/testsuite] Add untested case in gdb.gdb/complaints.exp When building gdb with "-Wall -O2 -g -flto=auto", I run into: ... (gdb) call clear_complaints()^M No symbol "clear_complaints" in current context.^M (gdb) FAIL: gdb.gdb/complaints.exp: clear complaints ... The problem is that lto has optimized away clear_complaints, and consequently the selftests cannot run. Fix this by: - using info function to detect presence of clear_complaints - handling the absence of clear_complaints by calling untested ... (gdb) UNTESTED: gdb.gdb/complaints.exp: \ Cannot find clear_complaints, skipping test ... Tested on x86_64-linux. gdb/testsuite/ChangeLog: 2021-09-03 Tom de Vries * gdb.gdb/complaints.exp: Use untested if clear_complaints cannot be found. 2021-09-03 Felix Willgerodt gdb: Enable finish command and inferior calls for _Float16 on amd64 and i386. Values of type _Float16 and _Float16 _Complex can now be used on CPUs with AVX512-FP16 support. Return values of those types are located in XMM0. Compiler support for gcc and clang is in progress, see e.g.: https://gcc.gnu.org/pipermail/gcc-patches/2021-July/574117.html gdb/ChangeLog: 2021-07-21 Felix Willgerodt * amd64-tdep.c (amd64_classify): Classify _Float16 and _Float16 _Complex as AMD64_SSE. * i386-tdep.c (i386_extract_return_value): Read _Float16 and _Float16 _Complex from xmm0. gdb/testsuite/ChangeLog: 2021-07-21 Felix Willgerodt * gdb.arch/x86-avx512fp16-abi.c: New file. * gdb.arch/x86-avx512fp16-abi.exp: New file. 2021-09-03 Felix Willgerodt Add half support for AVX512 register view. This adds support for the half datatype, FP16, to the AVX512 register printing. gdb/ChangeLog: 2020-07-21 Felix Willgerodt * i386-tdep.c (i386_zmm_type) : New field. (i386_ymm_type) : New field. (i386_gdbarch_init): Add set_gdbarch_half_format. * features/i386/64bit-avx512.xml: Add half type. * features/i386/64bit-avx512.c: Regenerated. * features/i386/64bit-sse.xml: Add half type. * features/i386/64bit-sse.c: Regenerated. gdb/testsuite/ChangeLog: 2021-07-21 Felix Willgerodt * gdb.arch/x86-avx512fp16.c: New file. * gdb.arch/x86-avx512fp16.exp: New file. * lib/gdb.exp (skip_avx512fp16_tests): New function. 2021-09-03 Felix Willgerodt gdb, i386: Enable AVX512-bfloat16 for i386 targets. Values of type bfloat16 can also be used on 32-bit targets, which was missed in the original enablement. This also adjusts the testcase to pass with "unix/-m32", where only the lower 8 AVX registers are available. gdb/ChangeLog: 2021-07-21 Felix Willgerodt * features/i386/32bit-sse.xml: Add bfloat16 type. * features/i386/32bit-sse.c: Regenerated. gdb/testsuite/ChangeLog: 2021-07-21 Felix Willgerodt * gdb.arch/x86-avx512bf16.exp: Only use x/z/ymm 0-7. 2021-09-03 Tom de Vries [gdb/testsuite] Add untested case in selftest_setup When building gdb with "-Wall -O2 -g -flto=auto", I run into: ... FAIL: gdb.gdb/python-helper.exp: breakpoint in captured_main \ (got interactive prompt) FAIL: gdb.gdb/python-helper.exp: run until breakpoint at captured_main WARNING: Couldn't test self ... and similar in gdb.gdb/selftest.exp. The first FAIL in more detail: ... (gdb) break captured_main^M Function "captured_main" not defined.^M Make breakpoint pending on future shared library load? (y or [n]) n^M (gdb) FAIL: gdb.gdb/python-helper.exp: breakpoint in captured_main \ (got interactive prompt) ... The problem is that lto has optimized away the captured_main function and consequently the selftests dependent on that cannot run. Fix this by: - using gdb_breakpoint to detect failure to set the breakpoint - handling the failure to set a breakpoint by calling untested - not emitting the warning if we've already got untested such that we have: ... (gdb) UNTESTED: gdb.gdb/python-helper.exp: Cannot set breakpoint at \ captured_main, skipping testcase. ... gdb/testsuite/ChangeLog: 2021-09-02 Tom de Vries * lib/selftest-support.exp: Emit untested when not being able to set breakpoint. 2021-09-03 Alan Modra ld testsuite tidy Fixes a few issues: 1) If you use "-fsanitize=address,undefined" in CFLAGS, the Makefile attempt to trim off -fsanitize options left us with ",undefined". 2) ld_compile adds CFLAGS_FOR_TARGET itself, no need to pass it. 3) CFLAGS might be needed linking bootstrap test. * Makefile.am (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Trim off all -fsanitize=*. * Makefile.in: Regenerate. * testsuite/ld-bootstrap/bootstrap.exp: Use CFLAGS when linking. * testsuite/ld-cdtest/cdtest.exp: Use CFLAGS_FOR_TARGET when linking. * testsuite/ld-auto-import/auto-import.exp: Don't pass CFLAGS_FOR_TARGET to ld_compile. * testsuite/ld-cygwin/exe-export.exp: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-elfvsb/elfvsb.exp: Likewise. * testsuite/ld-elfweak/elfweak.exp: Likewise. * testsuite/ld-gc/gc.exp: Likewise. * testsuite/ld-pe/pe-compile.exp: Likewise. * testsuite/ld-pe/pe-run.exp: Likewise. * testsuite/ld-pe/pe-run2.exp: Likewise. * testsuite/ld-plugin/plugin.exp: Likewise. * testsuite/ld-shared/shared.exp: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Likewise, and don't allow nios2 testing to trash CFLAGS_FOR_TARGET. * testsuite/ld-scripts/crossref.exp: Don't pass options in CC_FOR_TARGET, do so in CFLAGS_FOR_TARGET instead. * testsuite/ld-srec/srec.exp: Likewise, and for CXX. 2021-09-03 Alan Modra CC_FOR_TARGET et al The top level Makefile, the ld Makefile and others, define CC_FOR_TARGET to be a compiler for the binutils target machine. This is the compiler that should be used for almost all tests with C source. There are _FOR_TARGET versions of CFLAGS, CXX, and CXXFLAGS too. This was all supposed to work with the testsuite .exp files using CC for the target compiler, and CC_FOR_HOST for the host compiler, with the makefiles passing CC=$CC_FOR_TARGET and CC_FOR_HOST=$CC to the runtest invocation. One exception to the rule of using CC_FOR_TARGET is the native-only ld bootstrap test, which uses the newly built ld to link a copy of itself. Since the files being linked were created with the host compiler, the boostrap test should use CC and CFLAGS, in case some host compiler option provides needed libraries automatically. However, bootstrap.exp used CC where it should have used CC_FOR_HOST. I set about fixing that problem, then decided that playing games in the makefiles with CC was a bad idea. Not only is it confusing, but other dejagnu code knows about CC_FOR_TARGET. See dejagnu/target.exp. So this patch gets rid of the makefile variable renaming and changes all the .exp files to use the correct _FOR_TARGET variables. CC_FOR_HOST and CFLAGS_FOR_HOST disappear. A followup patch will correct bootstrap.exp to use CFLAGS, and a number of other things I noticed. binutils/ * testsuite/lib/binutils-common.exp (run_dump_test): Use CC_FOR_TARGET and CFLAGS_FOR_TARGET rather than CC and CFLAGS. ld/ * Makefile.am (check-DEJAGNU): Don't set CC to CC_FOR_TARGET and similar. Pass variables with unchanged names. Don't set CC_FOR_HOST or CFLAGS_FOR_HOST. * Makefile.in: Regenerate. * testsuite/config/default.exp: Update default CC and similar. (compiler_supports, plug_opt): Use CC_FOR_TARGET. * testsuite/ld-cdtest/cdtest.exp: Replace all uses of CC with CC_FOR_TARGET, and similarly for CFLAGS, CXX and CXXFLAGS. * testsuite/ld-auto-import/auto-import.exp: Likewise. * testsuite/ld-cygwin/exe-export.exp: Likewise. * testsuite/ld-elf/dwarf.exp: Likewise. * testsuite/ld-elf/indirect.exp: Likewise. * testsuite/ld-elf/shared.exp: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-elfvsb/elfvsb.exp: Likewise. * testsuite/ld-elfweak/elfweak.exp: Likewise. * testsuite/ld-gc/gc.exp: Likewise. * testsuite/ld-ifunc/ifunc.exp: Likewise. * testsuite/ld-mn10300/mn10300.exp: Likewise. * testsuite/ld-pe/pe-compile.exp: Likewise. * testsuite/ld-pe/pe-run.exp: Likewise. * testsuite/ld-pe/pe-run2.exp: Likewise. * testsuite/ld-pie/pie.exp: Likewise. * testsuite/ld-plugin/lto.exp: Likewise. * testsuite/ld-plugin/plugin.exp: Likewise. * testsuite/ld-scripts/crossref.exp: Likewise. * testsuite/ld-selective/selective.exp: Likewise. * testsuite/ld-sh/sh.exp: Likewise. * testsuite/ld-shared/shared.exp: Likewise. * testsuite/ld-srec/srec.exp: Likewise. * testsuite/ld-undefined/undefined.exp: Likewise. * testsuite/ld-unique/unique.exp: Likewise. * testsuite/ld-x86-64/tls.exp: Likewise. * testsuite/lib/ld-lib.exp: Likewise. libctf/ * Makefile.am (check-DEJAGNU): Don't set CC to CC_FOR_TARGET. Pass CC and CC_FOR_TARGET. Don't set CC_FOR_HOST. * Makefile.in: Regenerate. * testsuite/config/default.exp: Update default CC and similar. * testsuite/lib/ctf-lib.exp (run_native_host_cmd): Use CC rather than CC_FOR_HOST. (run_lookup_test): Use CC_FOR_TARGET and CFLAGS_FOR_TARGET. 2021-09-03 Alan Modra pj: asan: out of bounds, ubsan: left shift of negative * pj-dis.c: Include libiberty.h. (print_insn_pj): Don't index op->arg past array bound. Don't left shift negative int. ubsan: alpha: member access within null pointer * elf64-alpha.c (elf64_alpha_relax_with_lituse): Avoid UB. ubsan: libctf: applying zero offset to null pointer * ctf-open.c (init_symtab): Avoid ubsan error. 2021-09-03 Alan Modra haiku tidy --enable-maintainer-mode showed a number of files needing to be regenerated, and in the case of ld/Makefile.in that the file was regenerated by hand. Nothing to see here really. ld/ * Makefile.am (ALL_64_EMULATION_SOURCES): Sort haiku entry. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate. libctf/ * configure: Regenerate. zlib/ * configure: Regenerate. 2021-09-03 Fangrui Song gold: --export-dynamic-symbol: don't imply -u to match GNU ld. gold/ * archive.cc (Library_base::should_include_member): Don't handle --export-dynamic-symbol. * symtab.cc (Symbol_table::do_add_undefined_symbols_from_command_line): Likewise. 2021-09-03 GDB Administrator Automatic date update in version.in 2021-09-02 Alexander von Gluck IV Add support for the haiku operating system. These are the os support patches we have been grooming and maintaining for quite a few years over on git.haiku-os.org. All of these architectures are working and most have been stable for quite some time. 2021-09-02 Nick Clifton Fix the V850 assembler's generation of relocations for the st.b instruction. PR 28292 gas * config/tc-v850.c (handle_lo16): Also accept BFD_RELOC_V850_LO16_SPLIT_OFFSET. * testsuite/gas/v850/split-lo16.s: Add extra line. * testsuite/gas/v850/split-lo16.d: Update expected disassembly. opcodes * v850-opc.c (D16): Use BFD_RELOC_V850_LO16_SPLIT_OFFSET in place of BFD_RELOC_16. 2021-09-02 Alan Modra SHT_SYMTAB_SHNDX handling .symtab_shndx section contents is an array, one entry for each symbol in .symtab, present when the number of symbols exceeds a little less than 64k. Since the mapping is 1-1 with symbols there is no need to keep both dest_index and destshndx_index in elf_sym_strtab. Instead, just make sure that the shndx pointers to the swap functions are kept NULL when .symtab_shndx does not exist. Also, strtabcount in the linker's elf hash table is incremented in lock-step with the output symcount, so that can disappear too. 2021-09-02 Alan Modra PTR_ADD and NPTR_ADD for bfd.h This defines a couple of macros used to avoid ubsan complaints about calculations involving NULL pointers. PTR_ADD should be used in the case where it is known that the offset is always zero with a NULL pointer, and you'd like to know if a non-zero offset is ever used. NPTR_ADD should be rarely used, but is defined for cases where a non-zero offset is expected and should be ignored if the pointer is NULL. bfd/ * bfd-in.h (PTR_ADD, NPTR_ADD): Define. * bfd-in2.h: Regenerate. * elf-eh-frame.c (adjust_eh_frame_local_symbols): Avoid NULL pointer calculations. * elflink.c (_bfd_elf_strip_zero_sized_dynamic_sections): Likewise. (bfd_elf_add_dt_needed_tag, elf_finalize_dynstr): Likewise. (elf_link_add_object_symbols, elf_link_input_bfd): Likewise. (bfd_elf_final_link, bfd_elf_gc_record_vtinherit): Likewise. binutils/ * objdump.c (disassemble_section): Use PTR_ADD for rel_ppend. 2021-09-02 Alan Modra obstack.h __PTR_ALIGN vs. ubsan Current ubsan complains on every use of __PTR_ALIGN (when ptrdiff_t is as large as a pointer), due to making calculations relative to a NULL pointer. This patch avoids the problem by extracting out and simplifying __BPTR_ALIGN for the usual case. I've continued to use ptrdiff_t here, where it might be better to throw away __BPTR_ALIGN entirely and just assume uintptr_t exists. * obstack.h (__PTR_ALIGN): Expand and simplify __BPTR_ALIGN rather than calculating relative to a NULL pointer. 2021-09-02 GDB Administrator Automatic date update in version.in 2021-09-01 Tom de Vries [gdb/testsuite] Fix dwo path in fission-*.S [ Using $build for /home/vries/gdb_versions/devel/build to make things a bit more readable. ] When using make check// to run test-case gdb.dwarf2/fission-base.exp: ... ( cd $build/gdb; make check//unix RUNTESTFLAGS="fission-base.exp" ) ... we run into: ... (gdb) file \ $build/gdb/testsuite.unix/outputs/gdb.dwarf2/fission-base/fission-base^M Reading symbols from \ $build/gdb/testsuite.unix/outputs/gdb.dwarf2/fission-base/fission-base...^M warning: Could not find DWO CU \ $build/gdb/testsuite.1/outputs/gdb.dwarf2/fission-base/fission-base.dwo \ (0x807060504030201) referenced by CU at offset 0xc7 [in module \ $build/gdb/testsuite.unix/outputs/gdb.dwarf2/fission-base/fission-base]^M ... The problem is that the executable refers to the dwo file using path name $build/gdb/testsuite.1/outputs/gdb.dwarf2/fission-base/fission-base.dwo, while the actual dwo file is at $build/gdb/testsuite.unix/outputs/gdb.dwarf2/fission-base/fission-base.dwo. This is caused by this trick in fission-base.S: ... #define XSTR(s) STR(s) #define STR(s) #s ... .asciz XSTR(DWO) # DW_AT_GNU_dwo_name ... and: ... $ echo | gcc -E -dD - | grep "define unix" ... I used this trick to avoid doing additional_flags=-DDWO=\"$dwo\", since I was concerned that there could be quoting issues. However, I've found other uses of this pattern, f.i. in gdb/testsuite/gdb.base/corefile-buildid.exp: ... additional_flags=-DSHLIB_NAME=\"$dlopen_lib\"] ... So, fix this by: - using additional_flags=-DDWO=\"$dwo\" and - using plain DWO instead of XSTR(DWO) Likewise in other gdb.dwarf2/fission*.exp test-cases. Tested on x86_64-linux, using make check//unix. gdb/testsuite/ChangeLog: 2021-09-01 Tom de Vries PR testsuite/28298 * gdb.dwarf2/fission-base.S: Use DWO instead of XSTR(DWO). * gdb.dwarf2/fission-loclists-pie.S: Same. * gdb.dwarf2/fission-loclists.S: Same. * gdb.dwarf2/fission-reread.S: Same. * gdb.dwarf2/fission-base.exp: Use additional_flags=-DDWO=\"$dwo\". * gdb.dwarf2/fission-loclists-pie.exp: Same. * gdb.dwarf2/fission-loclists.exp: Same. * gdb.dwarf2/fission-reread.exp: Same. 2021-09-01 Tom de Vries [gdb/testsuite] Fix gdb.fortran/call-no-debug.exp symbol search On openSUSE Tumbleweed I ran into: ... (gdb) ptype outstring_func.part^M No symbol "outstring_func" in current context.^M (gdb) FAIL: gdb.fortran/call-no-debug.exp: ptype outstring_func.part ... while on openSUSE Leap 15.2 I have instead: ... (gdb) ptype string_func_^M type = ()^M (gdb) PASS: gdb.fortran/call-no-debug.exp: ptype string_func_ ... The difference is caused by the result for "info function string_func", which is this for the latter: ... (gdb) info function string_func^M All functions matching regular expression "string_func":^M ^M Non-debugging symbols:^M 0x000000000040089c string_func_^M ... but this for the former: ... (gdb) info function string_func^M All functions matching regular expression "string_func":^M ^M Non-debugging symbols:^M 0x00000000004012bb string_func_^M 0x00007ffff7bac5b0 outstring_func.part^M 0x00007ffff7bb1a00 outstring_func.part^M ... The extra symbols are part of glibc: ... $ nm /lib64/libc.so.6 | grep string_func 00000000000695b0 t outstring_func.part.0 000000000006ea00 t outstring_func.part.0 ... If glibc debug info is installed, we get instead: ... (gdb) info function string_func^M All functions matching regular expression "string_func":^M ^M File /usr/src/debug/glibc-2.33-9.1.x86_64/stdio-common/vfprintf-internal.c:^M 236: static int outstring_func(int, size_t, const unsigned int *, FILE *);^M ^M File vfprintf-internal.c:^M 236: static int outstring_func(int, size_t, const unsigned char *, FILE *);^M ^M Non-debugging symbols:^M 0x00000000004012bb string_func_^M ... and the FAIL doesn't trigger. Fix this by calling "info function string_func" before starting the exec, such that only symbols of the exec are taken into account. Tested on x86_64-linux. gdb/testsuite/ChangeLog: 2021-09-01 Tom de Vries * gdb.fortran/call-no-debug.exp: Avoid shared lib symbols for find_mangled_name calls. 2021-09-01 Yinjun Zhang nfp: add validity check of island and me AddressSanitizer detects heap-buffer-overflow when running "objdump -D" for nfp .nffw files. PR 27854 * nfp-dis.c (_NFP_ISLAND_MAX, _NFP_ME_MAX): Define. (nfp_priv_data): ..and use here. (_print_instrs): Sanity check island and menum. 2021-09-01 Alan Modra PR28250, Null pointer dereference in debug_class_type_samep Typo fix, obviously should be m1->variants != NULL, not m1->variants == NULL. PR 28250 * debug.c (debug_class_type_samep): Correct m1->variants test. 2021-09-01 GDB Administrator Automatic date update in version.in 2021-08-31 Simon Marchi gdb: remove breakpoint_find_if Remove breakpoint_find_if, replace its sole usage with using all_breakpoints directly instead. At the same time, change return types to use bool. Change-Id: I9ec392236b4804b362d16ab563330b9c07311106 2021-08-31 Nick Clifton Update the how-to-make-a-release document so that a check for empty manual pages is included. cf PR 28144 2021-08-31 Nelson Chu RISC-V: Extend .insn directive to support hardcode encoding. The .insn directive can let users use their own instructions, or some new instruction, which haven't supported in the old binutils. For example, if users want to use sifive cache instruction, they cannot just write "cflush.d1.l1" in the assembly code, they should use ".insn i SYSTEM, 0, x0, x10, -0x40". But the .insn directive may not easy to use for some cases, and not so friendly to users. Therefore, I believe most of the users will use ".word 0xfc050073", to encode the instructions directly, rather than use .insn. But once we have supported the mapping symbols, the .word directives are marked as data, so disassembler won't dump them as instructions as usual. I have discussed this with Kito many times, we all think extend the .insn direcitve to support the hardcode encoding, is the easiest way to resolve the problem. Therefore, there are two more .insn formats are proposed as follows, (original) .insn , , , ... .insn , .insn The is string, and the and are constants. gas/ * config/tc-riscv.c (riscv_ip_hardcode): Similar to riscv_ip, but assembles an instruction according to the hardcode values of .insn directive. * doc/c-riscv.texi: Document two new .insn formats. * testsuite/gas/riscv/insn-fail.d: New testcases. * testsuite/gas/riscv/insn-fail.l: Likewise. * testsuite/gas/riscv/insn-fail.s: Likewise. * testsuite/gas/riscv/insn.d: Updated. * testsuite/gas/riscv/insn.s: Likewise. 2021-08-31 John Baldwin Use gdbfmt for vprintf_filtered. gdbfmt was already used for printf_filtered, so using it for vprintf_filtered is more consistent. As a result, all callers of vfprintf_maybe_filtered now use gdbfmt, so the function can be simplified to assume the gdbfmt case and remove the associated bool argument. Similary, vprintf_filtered is now a simple wrapper around vfprintf_filtered. 2021-08-31 GDB Administrator Automatic date update in version.in 2021-08-30 John Baldwin fbsd-nat: Don't use '%jd' and '%ju' with printf_filtered. The handler for 'info proc status' for native processes on FreeBSD uses the 'j' size modifier along with uintmax_t / intmax_t casts to output integer values for types such as off_t that are not aliases of a basic C type such as 'int' or 'long'. printf_filtered does not support the 'j' modifer, so this resulted in runtime errors in practice: (gdb) info proc stat process 8674 Name: ls State: T (stopped) Parent process: 8673 Process group: 8674 Session id: 2779 Unrecognized format specifier 'j' in printf Instead, use plongest and pulongest to generate the output strings of these integer values. 2021-08-30 Simon Marchi gdb: fix build error in unittests/parallel-for-selftests.c We get this error when building GDB on some platforms. I get it using g++-10 on Ubuntu 20.04 (installed using the distro package). It was also reported by John Baldwin, using a clang that uses libc++. CXX unittests/parallel-for-selftests.o cc1plus: warning: command line option '-Wmissing-prototypes' is valid for C/ObjC but not for C++ /home/smarchi/src/binutils-gdb/gdb/unittests/parallel-for-selftests.c: In function 'void selftests::parallel_for::test(int)': /home/smarchi/src/binutils-gdb/gdb/unittests/parallel-for-selftests.c:53:30: error: use of deleted function 'std::atomic::atomic(const std::atomic&)' 53 | std::atomic counter = 0; | ^ In file included from /usr/include/c++/9/future:42, from /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/thread-pool.h:29, from /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/parallel-for.h:26, from /home/smarchi/src/binutils-gdb/gdb/unittests/parallel-for-selftests.c:22: /usr/include/c++/9/atomic:755:7: note: declared here 755 | atomic(const atomic&) = delete; | ^~~~~~ /usr/include/c++/9/atomic:759:17: note: after user-defined conversion: 'constexpr std::atomic::atomic(std::atomic::__integral_type)' 759 | constexpr atomic(__integral_type __i) noexcept : __base_type(__i) { } | ^~~~~~ I haven't dug to know why it does not happen everywhere, but this patch fixes it by using the constructor to initialize the variable, rather than the assignment operator. Change-Id: I6b27958171bf6187f6a875657395fd10441db7e6 2021-08-30 Nelson Chu RISC-V: PR28291, Fix the gdb fails that PR27916 caused. * According to PR28291, we get the following unexpected gdb behavior, (gdb) disassemble 0x0,+4 Dump of assembler code from 0x0 to 0x4: 0x0000000000000000: 0x0000000000000001: 0x0000000000000002: 0x0000000000000003: End of assembler dump. * This patch should fix it to the right behavior, (gdb) disassemble 0x0,+4 Dump of assembler code from 0x0 to 0x4: 0x0000000000000000: Cannot access memory at address 0x0 opcodes/ pr 28291 * riscv-dis.c (print_insn_riscv): Return STATUS if it is not zero. 2021-08-30 Tom Tromey Add some parallel_for_each tests Tom de Vries noticed that a patch in the DWARF scanner rewrite series caused a regression in parallel_for_each -- it started crashing in the case where the number of threads is 0 (there was an unchecked use of "n-1" that was used to size an array). He also pointed out that there were no tests of parallel_for_each. This adds a few tests of parallel_for_each, primarily testing that different settings for the number of threads will work. This test catches the bug that he found in that series. 2021-08-30 Tom Tromey Add a show function for "maint show worker-threads" I wanted to see how many threads gdb thought it was using, but "maint show worker-threads" only reported "unlimited". This patch adds a show function so that it will now report the number of threads gdb has started. Regression tested on x86-64 Fedora 34. 2021-08-30 Tom de Vries [gdb/cli] Don't assert on empty string for core-file With current gdb we run into: ... $ gdb -batch '' '' : No such file or directory. pathstuff.cc:132: internal-error: \ gdb::unique_xmalloc_ptr gdb_abspath(const char*): \ Assertion `path != NULL && path[0] != '\0'' failed. ... Fix this by skipping the call to gdb_abspath in core_target_open in the empty-string case, such that we have instead: ... $ gdb -batch '' '' : No such file or directory. : No such file or directory. $ ... Tested on x86_64-linux. gdb/ChangeLog: 2021-08-30 Tom de Vries PR cli/28290 * gdb/corelow.c (core_target_open): Skip call to gdb_abspath in the empty-string case. gdb/testsuite/ChangeLog: 2021-08-30 Tom de Vries PR cli/28290 * gdb.base/batch-exit-status.exp: Add gdb '' and gdb '' '' tests. 2021-08-30 Nelson Chu RISC-V: PR27916, Support mapping symbols. Similar to ARM/AARCH64, we add mapping symbols in the symbol table, to mark the start addresses of data and instructions. The $d means data, and the $x means instruction. Then the disassembler uses these symbols to decide whether we should dump data or instruction. Consider the mapping-04 test case, $ cat tmp.s .text .option norelax .option norvc .fill 2, 4, 0x1001 .byte 1 .word 0 .balign 8 add a0, a0, a0 .fill 5, 2, 0x2002 add a1, a1, a1 .data .word 0x1 # No need to add mapping symbols. .word 0x2 $ riscv64-unknown-elf-as tmp.s -o tmp.o $ riscv64-unknown-elf-objdump -d tmp.o Disassembly of section .text: 0000000000000000 <.text>: 0: 00001001 .word 0x00001001 # Marked $d, .fill directive. 4: 00001001 .word 0x00001001 8: 00000001 .word 0x00000001 # .byte + part of .word. c: 00 .byte 0x00 # remaining .word. d: 00 .byte 0x00 # Marked $d, odd byte of alignment. e: 0001 nop # Marked $x, nops for alignment. 10: 00a50533 add a0,a0,a0 14: 20022002 .word 0x20022002 # Marked $d, .fill directive. 18: 20022002 .word 0x20022002 1c: 2002 .short 0x2002 1e: 00b585b3 add a1,a1,a1 # Marked $x. 22: 0001 nop # Section tail alignment. 24: 00000013 nop * Use $d and $x to mark the distribution of data and instructions. Alignments of code are recognized as instructions, since we usually fill nops for them. * If the alignment have odd bytes, then we cannot just fill the nops into the spaces. We always fill an odd byte 0x00 at the start of the spaces. Therefore, add a $d mapping symbol for the odd byte, to tell disassembler that it isn't an instruction. The behavior is same as Arm and Aarch64. The elf/linux toolchain regressions all passed. Besides, I also disable the mapping symbols internally, but use the new objudmp, the regressions passed, too. Therefore, the new objudmp should dump the objects corretly, even if they don't have any mapping symbols. bfd/ pr 27916 * cpu-riscv.c (riscv_elf_is_mapping_symbols): Define mapping symbols. * cpu-riscv.h: extern riscv_elf_is_mapping_symbols. * elfnn-riscv.c (riscv_maybe_function_sym): Do not choose mapping symbols as a function name. (riscv_elf_is_target_special_symbol): Add mapping symbols. binutils/ pr 27916 * testsuite/binutils-all/readelf.s: Updated. * testsuite/binutils-all/readelf.s-64: Likewise. * testsuite/binutils-all/readelf.s-64-unused: Likewise. * testsuite/binutils-all/readelf.ss: Likewise. * testsuite/binutils-all/readelf.ss-64: Likewise. * testsuite/binutils-all/readelf.ss-64-unused: Likewise. gas/ pr 27916 * config/tc-riscv.c (make_mapping_symbol): Create a new mapping symbol. (riscv_mapping_state): Decide whether to create mapping symbol for frag_now. Only add the mapping symbols to text sections. (riscv_add_odd_padding_symbol): Add the mapping symbols for the riscv_handle_align, which have odd bytes spaces. (riscv_check_mapping_symbols): Remove any excess mapping symbols. (md_assemble): Marked as MAP_INSN. (riscv_frag_align_code): Marked as MAP_INSN. (riscv_init_frag): Add mapping symbols for frag, it usually called by frag_var. Marked as MAP_DATA for rs_align and rs_fill, and marked as MAP_INSN for rs_align_code. (s_riscv_insn): Marked as MAP_INSN. (riscv_adjust_symtab): Call riscv_check_mapping_symbols. * config/tc-riscv.h (md_cons_align): Defined to riscv_mapping_state with MAP_DATA. (TC_SEGMENT_INFO_TYPE): Record mapping state for each segment. (TC_FRAG_TYPE): Record the first and last mapping symbols for the fragments. The first mapping symbol must be placed at the start of the fragment. (TC_FRAG_INIT): Defined to riscv_init_frag. * testsuite/gas/riscv/mapping-01.s: New testcase. * testsuite/gas/riscv/mapping-01a.d: Likewise. * testsuite/gas/riscv/mapping-01b.d: Likewise. * testsuite/gas/riscv/mapping-02.s: Likewise. * testsuite/gas/riscv/mapping-02a.d: Likewise. * testsuite/gas/riscv/mapping-02b.d: Likewise. * testsuite/gas/riscv/mapping-03.s: Likewise. * testsuite/gas/riscv/mapping-03a.d: Likewise. * testsuite/gas/riscv/mapping-03b.d: Likewise. * testsuite/gas/riscv/mapping-04.s: Likewise. * testsuite/gas/riscv/mapping-04a.d: Likewise. * testsuite/gas/riscv/mapping-04b.d: Likewise. * testsuite/gas/riscv/mapping-norelax-04a.d: Likewise. * testsuite/gas/riscv/mapping-norelax-04b.d: Likewise. * testsuite/gas/riscv/no-relax-align.d: Updated. * testsuite/gas/riscv/no-relax-align-2.d: Likewise. include/ pr 27916 * opcode/riscv.h (enum riscv_seg_mstate): Added. opcodes/ pr 27916 * riscv-dis.c (last_map_symbol, last_stop_offset, last_map_state): Added to dump sections with mapping symbols. (riscv_get_map_state): Get the mapping state from the symbol. (riscv_search_mapping_symbol): Check the sorted symbol table, and then find the suitable mapping symbol. (riscv_data_length): Decide which data size we should print. (riscv_disassemble_data): Dump the data contents. (print_insn_riscv): Handle the mapping symbols. (riscv_symbol_is_valid): Marked mapping symbols as invalid. 2021-08-30 Tom de Vries [gdb/testsuite] Improve argument syntax of proc arange The current syntax of proc arange is: ... proc arange { arange_start arange_length {comment ""} {seg_sel ""} } { ... and a typical call looks like: ... arange $start $len ... This style is somewhat annoying because if you want to specify the last parameter, you need to give the default values of all the other optional ones before as well: ... arange $start $len "" $seg_sel ... Update the syntax to: ... proc arange { options arange_start arange_length } { parse_options { { comment "" } { seg_sel "" } } ... such that a typical call looks like: ... arange {} $start $len ... and a call using seg_sel looks like: ... arange { seg_sel $seg_sel } $start $len ... Also update proc aranges, which already has an options argument, to use the new proc parse_options. Tested on x86_64-linux. Co-Authored-By: Simon Marchi 2021-08-30 GDB Administrator Automatic date update in version.in 2021-08-29 GDB Administrator Automatic date update in version.in 2021-08-28 H.J. Lu ld: Change indirect symbol from IR to undefined bfd/ PR ld/28264 * elflink.c (_bfd_elf_merge_symbol): Change indirect symbol from IR to undefined. ld/ PR ld/28264 * testsuite/ld-plugin/lto.exp: Run PR ld/28264 test. * testsuite/ld-plugin/pr28264-1.d: New file. * testsuite/ld-plugin/pr28264-2.d: Likewise. * testsuite/ld-plugin/pr28264-3.d: Likewise. * testsuite/ld-plugin/pr28264-4.d: Likewise. * testsuite/ld-plugin/pr28264.c: Likewise. * testsuite/ld-plugin/pr28264.ver: Likewise. 2021-08-28 Alan Modra PR28264, ld.bfd crash on linking efivar with LTO PR 28264 PR 26978 * linker.c (_bfd_generic_link_add_one_symbol ): Check that string is non-NULL. 2021-08-28 GDB Administrator Automatic date update in version.in 2021-08-27 Tom de Vries [gdb/symtab] Don't write .gdb_index symbol table with empty entries When comparing the sizes of the index files generated for shlib outputs/gdb.dwarf2/dw2-zero-range/shr1.sl, I noticed a large difference between .debug_names: ... $ gdb -q -batch $shlib -ex "save gdb-index -dwarf-5 ." $ du -b -h shr1.sl.debug_names shr1.sl.debug_str 61 shr1.sl.debug_names 0 shr1.sl.debug_str ... and .gdb_index: ... $ gdb -q -batch $shlib -ex "save gdb-index ." $ du -b -h shr1.sl.gdb-index 8.2K shr1.sl.gdb-index ... The problem is that the .gdb_index contains a non-empty symbol table with only empty entries. Fix this by making the symbol table empty, such that we have instead: ... $ du -b -h shr1.sl.gdb-index 184 shr1.sl.gdb-index ... Tested on x86_64-linux. 2021-08-27 Tom de Vries [gdb/testsuite] Generate .debug_aranges in gdb.dlang/watch-loc.exp Before commit 5ef670d81fd "[gdb/testsuite] Add dummy start and end CUs in dwarf assembly" we had in exec outputs/gdb.dlang/watch-loc/watch-loc a D compilation unit at offset 0xc7: ... Compilation Unit @ offset 0xc7: Length: 0x4c (32-bit) Version: 4 Abbrev Offset: 0x64 Pointer Size: 8 <0>: Abbrev Number: 2 (DW_TAG_compile_unit) DW_AT_language : 19 (D) ... with a corresponding .debug_aranges entry: ... Offset into .debug_info: 0xc7 Pointer Size: 4 Segment Size: 0 Address Length 004004a7 0000000b 00000000 00000000 ... After that commit we have a dummy CU at offset 0xc7 and the D compilation unit at offset 0xd2: ... Compilation Unit @ offset 0xc7: Length: 0x7 (32-bit) Version: 4 Abbrev Offset: 0x64 Pointer Size: 8 Compilation Unit @ offset 0xd2: Length: 0x4c (32-bit) Version: 4 Abbrev Offset: 0x65 Pointer Size: 8 <0>
: Abbrev Number: 2 (DW_TAG_compile_unit) DW_AT_language : 19 (D) ... while the .debug_aranges entry still points to 0xc7. The problem is that the test-case uses a hack (quoting from commit 75f06e9dc59): ... [ Note: this is a non-trivial test-case. The file watch-loc-dw.S contains a .debug_info section, but not an .debug_aranges section or any actual code. The file watch-loc.c contains code and a .debug_aranges section, but no other debug section. So, the intent for the .debug_aranges section in watch-loc.c is to refer to a compilation unit in the .debug_info section in watch-loc-dw.S. ] ... and adding the dummy CU caused that hack to stop working. Fix this by moving the generation of .debug_aranges from watch-loc.c to watch-loc.exp, such that we have: ... Offset into .debug_info: 0xd2 Pointer Size: 4 Segment Size: 0 Address Length 004004a7 0000000b 00000000 00000000 ... Tested on x86_64-linux. 2021-08-27 Tom de Vries [gdb/testsuite] Generate .debug_aranges entry for dummy CU A best practise for DWARF [1] is to generate .debug_aranges entries for CUs even if they have no address range. Generate .debug_arange entries for the dummy CUs added by the DWARF assembler. Tested on x86_64-linux. [1] http://wiki.dwarfstd.org/index.php?title=Best_Practices 2021-08-27 Tom de Vries [gdb/testsuite] Add .debug_aranges in more test-cases A couple of test-cases fail when run with target board cc-with-debug-names due to missing .debug_aranges entries for the CUs added by the dwarf assembler. Add a .debug_aranges entry for those CUs. Tested on x86_64-linux. 2021-08-27 Tom de Vries [gdb/testsuite] Support .debug_aranges in dwarf assembly Add a proc aranges such that we can generate .debug_aranges sections in dwarf assembly using: ... cu { label cu_label } { ... } aranges {} cu_label { arange $addr $len [] [$segment_selector] } ... Tested on x86_64-linux. 2021-08-27 Tom de Vries [gdb/testsuite] Add label option to proc cu We can use current dwarf assembly infrastructure to declare a label that marks the start of the CU header: ... declare_labels header_start_cu_a _section ".debug_info" header_start_cu_a : cu {} { } _section ".debug_info" header_start_cu_b : cu {} { } ... on the condition that we switch to the .debug_info section before, which makes this style of use fragile. Another way to achieve the same is to use the label as generated by the cu proc itself: ... variable _cu_label cu {} { } set header_start_cu_a $_cu_label cu {} { } set header_start_cu_b $_cu_label ... but again that seems fragile given that adding a new CU inbetween will silently result in the wrong value for the label. Add a label option to proc cu such that we can simply do: ... cu { label header_start_cu_a } { } cu { label header_start_cu_b } { } ... Tested on x86_64-linux. 2021-08-27 GDB Administrator Automatic date update in version.in 2021-08-26 Andrew Burgess gdb: remove some stray newlines in debug output I spotted a couple of stray newlines that were left at the end of debug message during conversion to the new debug output scheme. These messages are part of the 'set debug lin-lwp 1' output. 2021-08-26 GDB Administrator Automatic date update in version.in 2021-08-25 GDB Administrator Automatic date update in version.in 2021-08-24 Tom Tromey Fix two regressions caused by CU / TU merging PR symtab/28160 and PR symtab/27893 concern GDB crashes in the test suite when using the "fission" target board. They are both caused by the patches that merge the list of CUs with the list of TUs (and to a lesser degree by the patches to share DWARF data across objfiles), and the underlying issue is the same: it turns out that reading a DWO can cause new type units to be created. This means that the list of dwarf2_per_cu_data objects depends on precisely which CUs have been expanded. However, because the type units can be created while expanding a CU means that the vector of CUs can expand while it is being iterated over -- a classic mistake. Also, because a TU can be added later, it means the resize_symtabs approach is incorrect. This patch fixes resize_symtabs by removing it, and having set_symtab resize the vector on demand. It fixes the iteration problem by introducing a safe (index-based) iterator and changing the relevant spots to use it. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28160 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27893 2021-08-24 Alan Modra Real programmers don't configure gcc using --with-ld * testsuite/lib/ld-lib.exp (run_host_cmd): Give a clue as to why gcc -B doesn't pick up the ld under test. 2021-08-24 Alan Modra objdump -S test fail on mingw FAIL: objdump -S FAIL: objdump --source-comment is seen on mingw for the simple reason that gcc adds a .exe suffix on the output file if not already present. Fix that, and tidy some objcopy tests. * testsuite/lib/binutils-common.exp (exeext): New proc. * testsuite/binutils-all/objcopy.exp (exe, test_prog): Use it here. (objcopy_remove_relocations_from_executable): Catch objcopy errors. Only run on ELF targets. * testsuite/binutils-all/objdump.exp (exe): Set variable. (test_build_id_debuglink, test_objdump_S): Use exe file suffix. 2021-08-24 James Bowman (FTDI-UK) FT32: Remove recursion in ft32_opcode The function ft32_opcode used recursion. This could cause a stack overflow. Replaced with a pair of non-recursive functions. PR 28169 * ft32-dis.c: Formatting. (ft32_opcode1): Split out from.. (ft32_opcode): ..here. 2021-08-24 GDB Administrator Automatic date update in version.in 2021-08-23 Tom Tromey Fix a latent bug in dw2-ranges-overlap.exp dw2-ranges-overlap.exp creates a program where a psymtab has two address ranges, and a function without debug info whose address is between these two ranges. Then it sets a breakpoint on this function and runs to it, expecting that the language should remain "auto; c" when stopped. However, this test case also has a "main" function described (briefly) in the DWARF, and this function is given language C++. Also, a breakpoint stop sets the current language to the language that was used when setting the breakpoint. My new DWARF scanner decides that this "main" is the main program and sets the current language to C++ at startup, causing this test to fail. This patch fixes the test in a simple way, by introducing a new function that takes the place of "main" in the DWARF. I think this still exercises the original problem, but also avoids problems with my branch. It seemed safe to me to submit this separately. 2021-08-23 Tom de Vries [gdb] Fix 'not in executable format' error message With trying to load a non-executable file into gdb, we run into PR26880: ... $ gdb -q -batch test.c "0x7ffc87bfc8d0s": not in executable format: \ file format not recognized ... The problem is caused by using %ps in combination with the error function (note that confusingly, it does work in combination with the warning function). Fix this by using plain "%s" instead. Tested on x86_64-linux. gdb/ChangeLog: 2021-08-22 Tom de Vries PR gdb/26880 * gdb/exec.c (exec_file_attach): Use %s instead of %ps in call to error function. gdb/testsuite/ChangeLog: 2021-08-22 Tom de Vries PR gdb/26880 * gdb.base/non-executable.exp: New file. 2021-08-23 Tom de Vries [gdb/testsuite] Use compiler-generated instead of gas-generated stabs The test-case gdb.dwarf2/dw2-ranges.exp is the only one in the gdb testsuite that uses gas-generated stabs. While the use seems natural alongside the use of gas-generated dwarf in the same test-case, there are a few known issues, filed on the gdb side as: - PR symtab/12497 - "stabs: PIE relocation does not work" - PR symtab/28221 - "[readnow, stabs] FAIL: gdb.dwarf2/dw2-ranges.exp: \ info line func" and on the gas side as: - PR gas/28233 - "[gas, --gstabs] Generate stabs more similar to gcc" The test-case contains a KFAIL for PR12497, but it's outdated and fails to trigger. The intention of the test-case is to test gas-generated dwarf, and using gcc-generated stabs instead of gas-generated stabs works fine. Supporting compiler-generated stabs is already a corner-case for gdb, and there's no current commitment/incentive to support/workaround gas-generated stabs, which can be considered a corner-case of a corner-case. Work around these problem by using compiler-generated stabs in the test-case. Tested on x86_64-linux. gdb/testsuite/ChangeLog: 2021-08-22 Tom de Vries * gdb.dwarf2/dw2-ranges.exp: Use compiler-generated stabs. 2021-08-23 Tom de Vries [gdb/testsuite] Add dummy start and end CUs in dwarf assembly Say one compiles a hello.c: ... $ gcc -g hello.c ... On openSUSE Leap 15.2 and Tumbleweed, the CU for hello.c is typically not the first in .debug_info, nor the last, due to presence of debug information in objects for sources like: - ../sysdeps/x86_64/start.S - init.c - ../sysdeps/x86_64/crti.S - elf-init.c - ../sysdeps/x86_64/crtn.S. On other systems, say ubuntu 18.04.5, the CU for hello.c is typically the first and the last in .debug_info. This difference has caused me to find some errors in the dwarf assembly using openSUSE, that didn't show up on other platforms. Force the same situation on other platforms by adding a dummy start and end CU. Tested on x86_64-linux. gdb/testsuite/ChangeLog: 2021-08-22 Tom de Vries PR testsuite/28235 * lib/dwarf.exp (Dwarf::dummy_cu): New proc. (Dwarf::assemble): Add dummy start and end CU. 2021-08-23 Tom de Vries [gdb/testsuite] Fix dw2-ranges-psym.exp with -readnow When running test-case gdb.dwarf2/dw2-ranges-psym.exp with target board -readnow, I run into: ... (gdb) file dw2-ranges-psym^M Reading symbols from dw2-ranges-psym...^M Expanding full symbols from dw2-ranges-psym...^M (gdb) set complaints 0^M (gdb) FAIL: gdb.dwarf2/dw2-ranges-psym.exp: No complaints ... The problem is that the regexp expects a gdb prompt immediately after the "Reading symbols" line. Fix this by updating the regexp. Tested on x86_64-linux. gdb/testsuite/ChangeLog: 2021-08-22 Tom de Vries * lib/gdb.exp (gdb_load_no_complaints): Update regexp to allow "Expanding full symbols" Line. 2021-08-23 GDB Administrator Automatic date update in version.in 2021-08-22 Mike Frysinger sim: m32r: add __linux__ hack for non-Linux hosts The m32r Linux syscall emulation logic assumes the host environment directly matches -- it's being run on 32-bit little endian Linux. This breaks building for non-Linux systems, so put all the code in __linux__ ifdef checks. This code needs a lot of love to make it work everywhere, but let's at least unbreak it for non-Linux hosts. 2021-08-22 GDB Administrator Automatic date update in version.in 2021-08-21 GDB Administrator Automatic date update in version.in 2021-08-20 Mike Frysinger sim: nltvals: switch output mode to a directory In preparation for this script generating more files, change the output argument to specify a directory. This drops the stdout behavior, but since no one really runs this tool directly, it's not a big deal. 2021-08-20 GDB Administrator Automatic date update in version.in 2021-08-19 Simon Marchi gdb: use bool in notify_command_param_changed_p and do_set_command Trivial patch to use bool instead of int. Change-Id: I9e5f8ee4305272a6671cbaaaf2f0484eff0d1ea5 2021-08-19 H.J. Lu x86: Put back 3 aborts in OP_E_memory Put back 3 aborts where invalid lengths should have been filtered out. gas/ PR binutils/28247 * testsuite/gas/i386/bad-bcast.s: Add a comment. opcodes/ PR binutils/28247 * * i386-dis.c (OP_E_memory): Put back 3 aborts. 2021-08-19 H.J. Lu x86: Avoid abort on invalid broadcast Print "{bad}" on invalid broadcast instead of abort. gas/ PR binutils/28247 * testsuite/gas/i386/bad-bcast.d: New file. * testsuite/gas/i386/bad-bcast.s: Likewise. * testsuite/gas/i386/i386.exp: Run bad-bcast. opcodes/ PR binutils/28247 * i386-dis.c (OP_E_memory): Print "{bad}" on invalid broadcast instead of abort. 2021-08-19 Aaron Merey gdb/solib: Refactor scan_dyntag scan_dyntag is unnecessarily duplicated in solib-svr4.c and solib-dsbt.c. Move this function to solib.c and rename it to gdb_bfd_scan_elf_dyntag. Also add it to solib.h so it is included in both solib-svr4 and solib-dsbt. 2021-08-19 GDB Administrator Automatic date update in version.in 2021-08-18 Will Schmidt [gdb] [rs6000] Add ppc64_linux_gcc_target_options method. Add a method to set the gcc target options for the ppc64 targets. This change sets an empty value, which allows the gcc default values (-mcmodel=medium) be used, instead of -mcmodel=large which is set by the default_gcc_target_options hook. [gdb] [rs6000] Add ppc64*_gnu_triplet_regexp methods. Add methods to set the target triplet so we can find the proper gcc when our gcc is named of the form powerpc64{le}--gcc or ppc64{le}--gcc. 2021-08-18 Alan Modra Re: as: Replace the removed symbol with the versioned symbol Some targets, typically embedded without shared libraries, replace the relocation symbol with a section symbol (see tc_fix_adjustable). Allow the test to pass for such targets. Fixes the following. avr-elf +FAIL: symver symver16 d10v-elf +FAIL: symver symver16 dlx-elf +FAIL: symver symver16 ip2k-elf +FAIL: symver symver16 m68k-elf +FAIL: symver symver16 mcore-elf +FAIL: symver symver16 pj-elf +FAIL: symver symver16 s12z-elf +FAIL: symver symver16 visium-elf +FAIL: symver symver16 z80-elf +FAIL: symver symver16 PR gas/28157 * testsuite/gas/symver/symver16.d: Relax reloc match. 2021-08-18 Alan Modra [GOLD] PowerPC64 relocation overflow for -Os register save/restore funcs Fixes a silly mistake in calculating the address of -Os out-of-line register save/restore function copies. Copies of these linker defined functions are added to stub sections when the original (in target->savres_section) can't be reached. * powerpc.cc (Target_powerpc::Relocate::relocate): Correct address calculation of out-of-line save/restore function copies. 2021-08-18 Alan Modra Another ld script backtrack * ldgram.y (length_spec): Throw away look-ahead NAME. 2021-08-18 Mike Frysinger gdb: fix spacing on CCLD silent rules sim: nltvals: localize TARGET_ defines Code should not be using these directly, instead they should be resolving these dynamically via cb_host_to_target_errno maps. Fix the Blackfin code and remove the defines out of the header so no new code can rely on them. 2021-08-18 Mike Frysinger sim: rename ChangeLog files to ChangeLog-2021 Now that ChangeLog entries are no longer used for sim patches, this commit renames all relevant sim ChangeLog to ChangeLog-2021, similar to what we would do in the context of the "Start of New Year" procedure. The purpose of this change is to avoid people merging ChangeLog entries by mistake when applying existing commits that they are currently working on. Also throw in a .gitignore entry to keep people from adding new ChangeLog files anywhere in the sim tree. 2021-08-18 GDB Administrator Automatic date update in version.in 2021-08-17 Simon Marchi gdb: fix thread_step_over_chain_length If I debug a single-thread program and look at the infrun debug logs, I see: [infrun] start_step_over: stealing global queue of threads to step, length = 2 That makes no sense... turns out there's a buglet in thread_step_over_chain_length, "num" should be initialized to 0. I think this bug is a leftover from an earlier version of the code (not merged upstream) that manually walked the list, where the first item was implicitly counted (hence the 1). Change-Id: I0af03aa93509aed36528be5076894dc156a0b5ce 2021-08-17 Shahab Vahedi opcodes: Fix the auxiliary register numbers for ARC HS The numbers for the auxiliary registers "tlbindex" and "tlbcommand" of ARCv2HS are incorrect. This patch makes the following changes to correct that error. ,------------.-----------------.---------------. | aux. reg. | old (incorrect) | new (correct) | |------------+-----------------+---------------| | tlbindex | 0x463 | 0x464 | | tlbcommand | 0x464 | 0x465 | `------------^-----------------^---------------' opcodes/ 2021-08-17 Shahab Vahedi * arc-regs.h (DEF): Fix the register numbers. 2021-08-17 H.J. Lu gdb: Don't assume r_ldsomap when r_version > 1 on Linux The r_ldsomap field is specific to Solaris (part of librtld_db), and should never be accessed for Linux. glibc is planning to add a field to support multiple namespaces. But there will be no r_ldsomap when r_version is bumped to 2. Add linux_[ilp32|lp64]_fetch_link_map_offsets to set r_ldsomap_offset to -1 and use them for Linux targets. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28236 2021-08-17 H.J. Lu gdbserver: Check r_version < 1 for Linux debugger interface Update gdbserver to check r_version < 1 instead of r_version != 1 so that r_version can be bumped for a new field in the glibc debugger interface to support multiple namespaces. Since so far, the gdbserver only reads fields defined for r_version == 1, it is compatible with r_version >= 1. All future glibc debugger interface changes will be backward compatible. If there is ever the need for backward incompatible change to the glibc debugger interface, a new DT_XXX element will be provided to access the new incompatible interface. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=11839 2021-08-17 Andrea Corallo PATCH [4/4] arm: Add Tag_PACRET_use build attribute bfd/ 2021-07-06 Andrea Corallo * elf32-arm.c (elf32_arm_merge_eabi_attributes): Add 'Tag_PACRET_use' case. binutils/ 2021-07-06 Andrea Corallo * readelf.c (arm_attr_tag_PAC_extension): Declare. (arm_attr_public_tags): Add 'PAC_extension' lookup. elfcpp/ 2021-07-06 Andrea Corallo * arm.h: Define 'Tag_PACRET_use' enum. gas/ 2021-07-06 Andrea Corallo * config/tc-arm.c (arm_convert_symbolic_attribute): Add 'Tag_PACRET_use' to the attribute_table. include/ 2021-07-06 Andrea Corallo * elf/arm.h (elf_arm_reloc_type): Add 'Tag_PACRET_use'. 2021-08-17 Andrea Corallo PATCH [3/4] arm: Add Tag_BTI_use build attribute bfd/ 2021-07-06 Andrea Corallo * elf32-arm.c (elf32_arm_merge_eabi_attributes): Add 'Tag_BTI_use' case. binutils/ 2021-07-06 Andrea Corallo * readelf.c (arm_attr_tag_PAC_extension): Declare. (arm_attr_public_tags): Add 'PAC_extension' lookup. elfcpp/ 2021-07-06 Andrea Corallo * arm.h: Define 'Tag_BTI_use' enum. gas/ 2021-07-06 Andrea Corallo * config/tc-arm.c (arm_convert_symbolic_attribute): Add 'Tag_BTI_use' to the attribute_table. include/ 2021-07-06 Andrea Corallo * elf/arm.h (elf_arm_reloc_type): Add 'Tag_BTI_use'. 2021-08-17 Andrea Corallo PATCH [2/4] arm: Add Tag_BTI_extension build attribute bfd/ 2021-07-06 Andrea Corallo * elf32-arm.c (elf32_arm_merge_eabi_attributes): Add 'Tag_BTI_extension' case. binutils/ 2021-07-06 Andrea Corallo * readelf.c (arm_attr_tag_PAC_extension): Declare. (arm_attr_public_tags): Add 'PAC_extension' lookup. elfcpp/ 2021-07-06 Andrea Corallo * arm.h: Define 'Tag_BTI_extension' enum. gas/ 2021-07-06 Andrea Corallo * config/tc-arm.c (arm_convert_symbolic_attribute): Add 'Tag_BTI_extension' to the attribute_table. include/ 2021-07-06 Andrea Corallo * elf/arm.h (elf_arm_reloc_type): Add 'Tag_BTI_extension'. 2021-08-17 Andrea Corallo PATCH [1/4] arm: Add Tag_PAC_extension build attribute bfd/ 2021-07-06 Andrea Corallo * elf32-arm.c (elf32_arm_merge_eabi_attributes): Add 'Tag_PAC_extension' case. binutils/ 2021-07-06 Andrea Corallo * readelf.c (arm_attr_tag_PAC_extension): Declare. (arm_attr_public_tags): Add 'PAC_extension' lookup. elfcpp/ 2021-07-06 Andrea Corallo * arm.h: Define 'Tag_PAC_extension' enum. gas/ 2021-07-06 Andrea Corallo * config/tc-arm.c (arm_convert_symbolic_attribute): Add 'Tag_PAC_extension' to the attribute_table. include/ 2021-07-06 Andrea Corallo * elf/arm.h (elf_arm_reloc_type): Add 'Tag_PAC_extension'. 2021-08-17 H.J. Lu x86: Always run fp tests Always run fp tests since the size of .tfloat, .ds.x, .dc.x and .dcb.x directive outputs is always 10 bytes. There is no need for fp-elf32 nor fp-elf64. PR gas/28230 * testsuite/gas/i386/fp-elf32.d: Removed. * testsuite/gas/i386/fp-elf64.d: Likewise. * testsuite/gas/i386/fp.s: Remove NO_TFLOAT_PADDING codes. * testsuite/gas/i386/i386.exp: Don't run fp-elf32 nor fp-elf64. Always run fp. 2021-08-17 GDB Administrator Automatic date update in version.in 2021-08-16 H.J. Lu x86: Don't pad .tfloat directive output .tfloat output should always be 10 bytes without padding, independent of psABIs. In glibc, x86 assembly codes expect 10-byte .tfloat output. This also reduces .ds.x output and .tfloat output with hex input from 12 bytes to 10 bytes to match .tfloat output. PR gas/28230 * NEWS: Mention changes of .ds.x output and .tfloat output with hex input. * config/tc-i386.c (x86_tfloat_pad): Removed. * config/tc-i386.h (X_PRECISION_PAD): Changed to 0. (x86_tfloat_pad): Removed. * testsuite/gas/i386/fp.s: If NO_TFLOAT_PADDING isn't defined, add explicit paddings after .tfloat, .ds.x, .dc.x and .dcb.x directives. * testsuite/gas/i386/i386.exp (ASFLAGS): Append "--defsym NO_TFLOAT_PADDING=1" when running the fp test. 2021-08-16 Tom Tromey Fix register regression in DWARF evaluator On an internal test case, using an arm-elf target, commit ba5bc3e5a92 ("Make DWARF evaluator return a single struct value") causes a regression. (It doesn't happen for any of the other cross targets that I test when importing upstream gdb.) I don't know if there's an upstream gdb test case showing the same problem... I can only really run native tests with dejagnu AFAIK. The failure manifests like this: Breakpoint 1, file_1.export_1 (param_1=, str=...) at [...]/file_1.adb:5 Whereas when it works it looks like: Breakpoint 1, file_1.export_1 (param_1=99.0, str=...) at [...]/file_1.adb:5 The difference is that the new code uses the passed-in gdbarch, whereas the old code used the frame's gdbarch, when handling DWARF_VALUE_REGISTER. This patch restores the use of the frame's arch. 2021-08-16 Tom Tromey Fix Ada regression due to DWARF expression series Commit 0579205aec4 ("Simplify dwarf_expr_context class interface") caused a regression in the internal AdaCore test suite. I didn't try to reproduce this with the GDB test suite, but the test is identical to gdb.dwarf2/dynarr-ptr.exp. The problem is that this change: case DW_OP_push_object_address: /* Return the address of the object we are currently observing. */ - if (this->data_view.data () == nullptr - && this->obj_address == 0) + if (this->m_addr_info == nullptr) ... slightly changes the logic here. In particular, it's possible for the caller to pass in a non-NULL m_addr_info, but one that looks like: (top) p *this.m_addr_info $15 = { type = 0x29b7a70, valaddr = { m_array = 0x0, m_size = 0 }, addr = 0, next = 0x0 } In this case, an additional check is needed. With the current code, what happens instead is that the computation computes an incorrect address -- but one that does not fail in read_memory, due to the precise memory map of the embedded target in question. This patch restores the old logic. 2021-08-16 Patrick Monnerat Notify observer of breakpoint auto-disabling As breakpoint_modified observer is currently notified upon breakpoint stop before handling auto-disabling when enable count is reached, the observer is never notified of the disabling. The problem affects: - The MI interpreter enabled= value when reporting =breakpoint-modified - A Python event handler for breakpoint_modified using the "enabled" member of its parameter - insight: breakpoint GUI window is not properly updated upon auto-disable This patch moves the observer notification after the auto-disabling code and implements corresponding tests for the MI and Python cases. Fixes https://sourceware.org/bugzilla/show_bug.cgi?id=23336 Change-Id: I0c50df4789334071e5390cb46b3ca0d4a7f83c61 2021-08-16 H.J. Lu as: Replace the removed symbol with the versioned symbol When a symbol removed by .symver is used in relocation and there is one and only one versioned symbol, don't remove the symbol. Instead, mark it to be removed and replace the removed symbol used in relocation with the versioned symbol before generating relocation. PR gas/28157 * symbols.c (symbol_flags): Add removed. (symbol_entry_find): Updated. (symbol_mark_removed): New function. (symbol_removed_p): Likewise. * symbols.h (symbol_mark_removed): New prototype. (symbol_removed_p): Likewise. * write.c (write_relocs): Call obj_fixup_removed_symbol on removed fixp->fx_addsy and fixp->fx_subsy if defined. (set_symtab): Don't add a symbol if symbol_removed_p returns true. * config/obj-elf.c (elf_frob_symbol): Don't remove the symbol if it is used on relocation. Instead, mark it as to be removed and issue an error if the symbol has more than one versioned name. (elf_fixup_removed_symbol): New function. * config/obj-elf.h (elf_fixup_removed_symbol): New prototype. (obj_fixup_removed_symbol): New. * testsuite/gas/symver/symver11.d: Updated expected error message. * testsuite/gas/symver/symver16.d: New file. * testsuite/gas/symver/symver16.s: Likewise. 2021-08-16 GDB Administrator Automatic date update in version.in 2021-08-15 GDB Administrator Automatic date update in version.in 2021-08-14 Alan Modra ld script fill pattern expression It turns out we do need to backtrack when parsing after all. The fill_opt component in the section rule swiches to EXPRESSION and back to SCRIPT, and to find the end of an expression it is necessary to look ahead one token. * ldgram.y (section): Throw away lookahead NAME token. (overlay_section): Likewise. * testsuite/ld-elf/overlay.t: Add fill pattern on overlays. Test fill pattern before stupidly named normal sections too, and before /DISCARD/. 2021-08-14 GDB Administrator Automatic date update in version.in 2021-08-13 Alan Modra ld lexer tidy, possibly break the world This tidies the states in which ld lexer rules are enabled. This change will quite likely trip over issues similar to those mentioned in the new ldlex.l comments, so please test it out. * ldgram.y (wildcard_name): Remove now unnecessary components. * ldlex.l: Restrict many rules' states. Remove -l expression state rule. Comment on lookahead state madness and need for /DISCARD/ in expression state. 2021-08-13 Alan Modra ld script lower-case absolute and sizeof_headers I think these happened by accident, so let's see what breaks if they are removed. * ldlex.l: Remove lower case "absolute" and "sizeof_headers" in non-mri mode. * ld.texi: Remove sizeof_headers index. * testsuite/ld-mmix/mmohdr1.ld: Use SIZEOF_HEADERS. 2021-08-13 Alan Modra tidy mri script extern MRI mode generally doesn't flip lexer states, so let's make MRI mode "extern" not do so either. * ldgram.y (extern_name_list): Don't change lex state here. (ifile_p1): Change state here on EXTERN instead. 2021-08-13 Alan Modra Re: PR28217, Syntax error when memory region contains a hyphen I discovered some more errors when tightening up the lexer rules. Just because we INCLUDE a file doesn't mean we've switched states. PR 28217 * ldgram.y (statement): Don't switch lexer state on INCLUDE. (mri_script_command, ifile_p1, memory_spec, section): Likewise. 2021-08-13 Lifang Xia PR28168: [CSKY] Fix stack overflow in disassembler PR 28168: Stack overflow with a large float. %f is not a goot choice for this. %f should be replaced with %.7g. gas/ * testsuite/gas/csky/pr28168.d: New testcase for PR 28168. * testsuite/gas/csky/pr28168.s: Likewise. * testsuite/gas/csky/v2_float_part2.d: Following the new format. * opcodes/csky-dis.c (csky_output_operand): %.7g replaces %f. 2021-08-13 Alan Modra PR28217, Syntax error when memory region contains a hyphen The saga of commit 40726f16a8d7 continues. This attacks the problem of switching between SCRIPT and EXPRESSION state lexing by removing the need to do so for phdrs like ":text". Instead {WILDCHAR}* matching, the reason why ":text" lexed as one token, is restricted to within the braces of a section or overlay statement. The new WILD lexer state is switched at the non-optional brace tokens, so ldlex_backup is no longer needed. I've also removed the BOTH state, which doesn't seem to be needed any more. Besides rules involving error reporting, there was just one place where SCRIPT appeared without BOTH, the {WILDCHAR}* rule, three where BOTH appears without SCRIPT for tokens that only need EXPRESSION state, and two where BOTH appears alongside INPUT_LIST. (Since I'm editing the wild and filename rules, removing BOTH and adding WILD can also be seen as renaming the old BOTH state to SCRIPT and renaming the old SCRIPT state to WILD with a reduced scope.) As a followup, I'll look at removing EXPRESSION state from some lexer rules that no longer need it due to this cleanup. PR 28217 * ldgram.y (exp ): Use paren_script_name. (section): Parse within braces of section in wild mode, and after brace back in script mode. Remove ldlex_backup call. Similarly for OVERLAY. (overlay_section): Similarly. (script_file): Replace ldlex_both with ldlex_script. * ldlex.h (ldlex_wild): Declare. (ldlex_both): Delete. * ldlex.l (BOTH): Delete. Remove state from all rules. (WILD): New state. Enable many tokens in this state. Enable filename match in SCRIPT mode. Enable WILDCHAR match in WILD state, disable in SCRIPT mode. (ldlex_wild): New function. * ldfile.c (ldfile_try_open_bfd): Replace ldlex_both call with ldlex_script. 2021-08-13 Alan Modra ns32k configury Since ns32k-netbsd is as yet not removed, just marked obsolete, the target should still be accepted with --enable-obsolete. I also enabled ns32k-openbsd in ld since there doesn't seem to be a good reason why that target is not supported there but is elsewhere. bfd/ * config.bfd: Allow ns32k-netbsd. ld/ * configure.tgt: Allow ns32k-openbsd. 2021-08-13 GDB Administrator Automatic date update in version.in 2021-08-13 Lancelot SIX gdb: riscv_scan_prologue: handle LD and LW instructions While working on the testsuite, I ended up noticing that GDB fails to produce a full backtrace from a thread waiting in pthread_join. When selecting the waiting thread and using the 'bt' command, the following result can be observed: (gdb) bt #0 0x0000003ff7fccd20 in __futex_abstimed_wait_common64 () from /lib/riscv64-linux-gnu/libpthread.so.0 #1 0x0000003ff7fc43da in __pthread_clockjoin_ex () from /lib/riscv64-linux-gnu/libpthread.so.0 Backtrace stopped: frame did not save the PC On my platform, I do not have debug symbols for glibc, so I need to rely on prologue analysis in order to unwind stack. Here is what the function prologue looks like: (gdb) disassemble __pthread_clockjoin_ex Dump of assembler code for function __pthread_clockjoin_ex: 0x0000003ff7fc42de <+0>: addi sp,sp,-144 0x0000003ff7fc42e0 <+2>: sd s5,88(sp) 0x0000003ff7fc42e2 <+4>: auipc s5,0xd 0x0000003ff7fc42e6 <+8>: ld s5,-2(s5) # 0x3ff7fd12e0 0x0000003ff7fc42ea <+12>: ld a5,0(s5) 0x0000003ff7fc42ee <+16>: sd ra,136(sp) 0x0000003ff7fc42f0 <+18>: sd s0,128(sp) 0x0000003ff7fc42f2 <+20>: sd s1,120(sp) 0x0000003ff7fc42f4 <+22>: sd s2,112(sp) 0x0000003ff7fc42f6 <+24>: sd s3,104(sp) 0x0000003ff7fc42f8 <+26>: sd s4,96(sp) 0x0000003ff7fc42fa <+28>: sd s6,80(sp) 0x0000003ff7fc42fc <+30>: sd s7,72(sp) 0x0000003ff7fc42fe <+32>: sd s8,64(sp) 0x0000003ff7fc4300 <+34>: sd s9,56(sp) 0x0000003ff7fc4302 <+36>: sd a5,40(sp) As far as prologue analysis is concerned, the most interesting part is done at address 0x0000003ff7fc42ee (<+16>): 'sd ra,136(sp)'. This stores the RA (return address) register on the stack, which is the information we are looking for in order to identify the caller. In the current implementation of the prologue scanner, GDB stops when hitting 0x0000003ff7fc42e6 (<+8>) because it does not know what to do with the 'ld' instruction. GDB thinks it reached the end of the prologue but have not yet reached the important part, which explain GDB's inability to unwind past this point. The section of the prologue starting at <+4> until <+12> is used to load the stack canary[1], which will then be placed on the stack at <+36> at the end of the prologue. In order to have the prologue properly handled, this commit proposes to add support for the ld instruction in the RISC-V prologue scanner. I guess riscv32 would use lw in such situation so this patch also adds support for this instruction. With this patch applied, gdb is now able to unwind past pthread_join: (gdb) bt #0 0x0000003ff7fccd20 in __futex_abstimed_wait_common64 () from /lib/riscv64-linux-gnu/libpthread.so.0 #1 0x0000003ff7fc43da in __pthread_clockjoin_ex () from /lib/riscv64-linux-gnu/libpthread.so.0 #2 0x0000002aaaaaa88e in bar() () #3 0x0000002aaaaaa8c4 in foo() () #4 0x0000002aaaaaa8da in main () I have had a look to see if I could reproduce this easily, but in my simple testcases using '-fstack-protector-all', the canary is loaded after the RA register is saved. I do not have a reliable way of generating a prologue similar to the problematic one so I forged one instead. The testsuite have been run on riscv64 ubuntu 21.01 with no regression observed. [1] https://en.wikipedia.org/wiki/Buffer_overflow_protection#Canaries 2021-08-12 Tom Tromey Update documentation to mention Pygments Philippe Blain pointed out that the gdb documentation does not mention that Pygments may be used for source highlighting. This patch updates the docs to reflect how highlighting is actually done. 2021-08-12 Simon Marchi gdb: make gdbarch_printable_names return a vector I noticed that gdbarch_selftest::operator() leaked the value returned by gdbarch_printable_names. Make gdbarch_printable_names return an std::vector and update callers. That makes it easier for everyone involved, less manual memory management. Change-Id: Ia8fc028bdb91f787410cca34f10bf3c5a6da1498 2021-08-12 Carl Love Improve forward progress test in python.exp The test steps into func2 and than does an up to get back to the previous frame. The test checks that the line number you are at after the up command is greater than the line where the function was called from. The assembly/codegen for the powerpc target includes a NOP after the branch-link. func2 (); /* Break at func2 call site. / 10000694: 59 00 00 48 bl 100006ec 10000698: 00 00 00 60 nop return 0; / Break to end. */ 1000069c: 00 00 20 39 li r9,0 The PC at the instruction following the branch-link is 0x10000698 which GDB.find_pc_line() maps to the same line number as the bl instruction. GDB did move past the branch-link location thus making forward progress. The following proposed fix adds an additional PC check to see if forward progress was made. The line test is changed from greater than to greater than or equal. 2021-08-12 Jiangshuai Li gdb:csky rm tdesc_has_registers in csky_register_name As CSKY arch has not parsed target-description.xml in csky_gdbarch_init, when a remote server, like csky-qemu or gdbserver, send a target-description.xml to gdb, tdesc_has_registers will return ture, but tdesc_register_name (gdbarch, 0) will return NULL, so a cmd "info registers r0" will not work. Function of parsing target-description.xml will be add later for CSKY arch, now it is temporarily removed to allow me to do other supported tests. 2021-07-15 Jiangshuai Li * csky-tdep.c : not using tdesc funtions in csky_register_name 2021-08-12 Alan Modra Re: gas: support NaN flavors Fixes tic4x-coff FAIL: simple FP constants * testsuite/gas/all/float.s: Make NaN tests conditional on hasnan. * testsuite/gas/all/gas.exp: Define hasnan. 2021-08-12 GDB Administrator Automatic date update in version.in 2021-08-11 H.J. Lu ld: Update the pass and fail strings of PR ld/28138 test PR ld/28138 * testsuite/ld-plugin/lto.exp: Update the pass and fail strings of PR ld/28138 test to indicate which part of the test passed and failed. 2021-08-11 Darius Galis Fix a typo in the RX asse,bler. The Double-precision floating-point exception handling control register name is DECNT not DCENT. * config/rx-parse.y (DECNT): Fixed typo. * testsuite/gas/rx/dpopm.sm (DECNT): Fixed typo. * testsuite/gas/rx/dpushm.sm (DECNT): Fixed typo. * testsuite/gas/rx/macros.inc (DECNT): Fixed typo. 2021-08-11 Nick Clifton Fix an internal error in the CSKY assembler when asked to resolve an overlarge constant. PR 28215 * config/tc-csky.c (md_apply_fix): Correctly handle a fixup that involves an overlarge constant. 2021-08-11 Luis Machado Add 3 new PAC-related ARM note types The following patch synchronizes includes/objdump/readelf with the Linux Kernel in terms of ARM regset notes. We're currently missing 3 of them: NT_ARM_PACA_KEYS NT_ARM_PACG_KEYS NT_ARM_PAC_ENABLED_KEYS We don't need GDB to bother with this at the moment, so this doesn't update bfd/elf.c. If needed, we can do it in the future. binutils/ * readelf.c (get_note_type): Handle new ARM PAC notes. include/elf/ * common.h (NT_ARM_PACA_KEYS, NT_ARM_PACG_KEYS) (NT_ARM_PAC_ENABLED_KEYS): New constants. 2021-08-11 Nick Clifton Updated Portuguese translation for the binutils sub-directory. 2021-08-11 John Ericson Deprecate a.out support for NetBSD targets. As discussed previously, a.out support is now quite deprecated, and in some cases removed, in both Binutils itself and NetBSD, so this legacy default makes little sense. `netbsdelf*` and `netbsdaout*` still work allowing the user to be explicit about there choice. Additionally, the configure script warns about the change as Nick Clifton requested. One possible concern was the status of NetBSD on NS32K, where only a.out was supported. But per [1] NetBSD has removed support, and if it were to come back, it would be with ELF. The binutils implementation is therefore marked obsolete, per the instructions in the last message. With that patch and this one applied, I have confirmed the following: --target=i686-unknown-netbsd --target=i686-unknown-netbsdelf builds completely --target=i686-unknown-netbsdaout properly fails because target is deprecated. --target=vax-unknown-netbsdaout builds completely except for gas, where the target is deprecated. [1]: https://mail-index.netbsd.org/tech-toolchain/2021/07/19/msg004025.html --- bfd/config.bfd | 43 +++++++++++++-------- bfd/configure.ac | 5 +-- binutils/testsuite/binutils-all/nm.exp | 2 +- binutils/testsuite/lib/binutils-common.exp | 7 +--- config/picflag.m4 | 4 +- gas/configure.tgt | 9 +++-- gas/testsuite/gas/arm/blx-bl-convert.d | 2 +- gas/testsuite/gas/arm/blx-local-thumb.d | 2 +- gas/testsuite/gas/sh/basic.exp | 2 +- gdb/configure.host | 34 +++++++---------- gdb/configure.tgt | 2 +- gdb/testsuite/gdb.asm/asm-source.exp | 6 +-- intl/configure | 2 +- ld/configure.tgt | 44 +++++++++++----------- ld/testsuite/ld-arm/arm-elf.exp | 4 +- ld/testsuite/ld-elf/elf.exp | 2 +- ld/testsuite/ld-elf/shared.exp | 4 +- libiberty/configure | 4 +- 2021-08-11 Andrew Burgess gdb: don't print backtrace when dumping core after an internal error Currently, when GDB hits an internal error, and the user selects to dump core, the recently added feature to write a backtrace to the console will kick in, and print a backtrace as well as dumping the core. This was certainly not my intention when adding the backtrace on fatal signal functionality, this feature was intended to produce a backtrace when GDB crashes due to some fatal signal, internal errors should have continued to behave as they did before, unchanged. In this commit I set the signal disposition of SIGABRT back to SIG_DFL just prior to the call to abort() that GDB uses to trigger the core dump, this prevents GDB reaching the code that writes the backtrace to the console. I've also added a test that checks we don't see a backtrace on the console after an internal error. 2021-08-11 Andrew Burgess gdb: register SIGBUS, SIGFPE, and SIGABRT handlers Register handlers for SIGBUS, SIGFPE, and SIGABRT. All of these signals are setup as fatal signals that will cause GDB to terminate. However, by passing these signals through the handle_fatal_signal function, a user can arrange to see a backtrace when GDB terminates (see maint set backtrace-on-fatal-signal). In normal use of GDB there should be no user visible changes after this commit. Only if GDB terminates with one of the above signals will GDB change slightly, potentially printing a backtrace before aborting. I've added new tests for SIGFPE, SIGBUS, and SIGABRT. 2021-08-11 Andrew Burgess gdb: print backtrace on fatal SIGSEGV This commit adds a new maintenance feature, the ability to print a (limited) backtrace if GDB dies due to a fatal signal. The backtrace is produced using the backtrace and backtrace_symbols_fd functions which are declared in the execinfo.h header, and both of which are async signal safe. A configure check has been added to check for these features, if they are not available then the new code is not compiled into GDB and the backtrace will not be printed. The motivation for this new feature is to aid in debugging GDB in situations where GDB has crashed at a users site, but the user is reluctant to share core files, possibly due to concerns about what might be in the memory image within the core file. Such a user might be happy to share a simple backtrace that was written to stderr. The production of the backtrace is on by default, but can switched off using the new commands: maintenance set backtrace-on-fatal-signal on|off maintenance show backtrace-on-fatal-signal Right now, I have hooked this feature in to GDB's existing handling of SIGSEGV only, but this will be extended to more signals in a later commit. One additional change I have made in this commit is that, when we decide GDB should terminate due to the fatal signal, we now raise the same fatal signal rather than raising SIGABRT. Currently, this is only effecting our handling of SIGSEGV. So, previously, if GDB hit a SEGV then we would terminate GDB with a SIGABRT. After this commit we will terminate GDB with a SIGSEGV. This feels like an improvement to me, we should still get a core dump, but in many shells, the user will see a more specific message once GDB exits, in bash for example "Segmentation fault" rather than "Aborted". Finally then, here is an example of the output a user would see if GDB should hit an internal SIGSEGV: Fatal signal: Segmentation fault ----- Backtrace ----- ./gdb/gdb[0x8078e6] ./gdb/gdb[0x807b20] /lib64/libpthread.so.0(+0x14b20)[0x7f6648c92b20] /lib64/libc.so.6(__poll+0x4f)[0x7f66484d3a5f] ./gdb/gdb[0x1540f4c] ./gdb/gdb[0x154034a] ./gdb/gdb[0x9b002d] ./gdb/gdb[0x9b014d] ./gdb/gdb[0x9b1aa6] ./gdb/gdb[0x9b1b0c] ./gdb/gdb[0x41756d] /lib64/libc.so.6(__libc_start_main+0xf3)[0x7f66484041a3] ./gdb/gdb[0x41746e] --------------------- A fatal error internal to GDB has been detected, further debugging is not possible. GDB will now terminate. This is a bug, please report it. For instructions, see: . Segmentation fault (core dumped) It is disappointing that backtrace_symbols_fd does not actually map the addresses back to symbols, this appears, in part, to be due to GDB not being built with -rdynamic as the manual page for backtrace_symbols_fd suggests, however, even when I do add -rdynamic to the build of GDB I only see symbols for some addresses. We could potentially look at alternative libraries to provide the backtrace (e.g. libunwind) however, the solution presented here, which is available as part of glibc is probably a good baseline from which we might improve things in future. 2021-08-11 Andrew Burgess gdb: rename async_init_signals to gdb_init_signals The async_init_signals has, for some time, dealt with async and sync signals, so removing the async prefix makes sense I think. Additionally, as pointed out by Pedro: ..... The comments relating to SIGTRAP and SIGQUIT within this function are out of date. The comments for SIGTRAP talk about the signal disposition (SIG_IGN) being passed to the inferior, meaning the signal disposition being inherited by GDB's fork children. However, we now call restore_original_signals_state prior to forking, so the comment on SIGTRAP is redundant. The comments for SIGQUIT are similarly out of date, further, the comment on SIGQUIT talks about problems with BSD4.3 and vfork, however, we have not supported BSD4.3 for several years now. Given the above, it seems that changing the disposition of SIGTRAP is no longer needed, so I've deleted the signal() call for SIGTRAP. Finally, the header comment on the function now called gdb_init_signals was getting quite out of date, so I've updated it to (hopefully) better reflect reality. There should be no user visible change after this commit. 2021-08-11 Andrew Burgess gdb: register signal handler after setting up event token This commit fixes the smallest of small possible bug related to signal handling. If we look in async_init_signals we see code like this: signal (SIGQUIT, handle_sigquit); sigquit_token = create_async_signal_handler (async_do_nothing, NULL, "sigquit"); Then if we look in handle_sigquit we see code like this: mark_async_signal_handler (sigquit_token); signal (sig, handle_sigquit); Finally, in mark_async_signal_handler we have: async_handler_ptr->ready = 1; Where async_handler_ptr will be sigquit_token. What this means is that if a SIGQUIT arrive in async_init_signals after handle_sigquit has been registered, but before sigquit_token has been initialised, then GDB will most likely crash. The chance of this happening is tiny, but fixing this is trivial, just ensure we call create_async_signal_handler before calling signal, so lets do that. There are no tests for this. Trying to land a signal in the right spot is pretty hit and miss. I did try changing the current HEAD GDB like this: signal (SIGQUIT, handle_sigquit); raise (SIGQUIT); sigquit_token = create_async_signal_handler (async_do_nothing, NULL, "sigquit"); And confirmed that this did result in a crash, after my change I tried this: sigquit_token = create_async_signal_handler (async_do_nothing, NULL, "sigquit"); signal (SIGQUIT, handle_sigquit); raise (SIGQUIT); And GDB now starts up just fine. gdb/ChangeLog: * event-top.c (async_init_signals): For each signal, call signal only after calling create_async_signal_handler. 2021-08-11 Andrew Burgess gdb: terminate upon receipt of SIGFPE GDB's SIGFPE handling is broken, this is PR gdb/16505 and PR gdb/17891. We currently try to use an async event token to process SIGFPE. So, when a SIGFPE arrives the signal handler calls mark_async_signal_handler then returns, effectively ignoring the signal (for now). The intention is that later the event loop will see that the async token associated with SIGFPE has been marked and will call the async handler, which just throws an error. The problem is that SIGFPE is not safe to ignore. Ignoring a SIGFPE (unless it is generated artificially, e.g. by raise()) is undefined behaviour, after ignoring the signal on many targets we return to the instruction that caused the SIGFPE to be raised, which immediately causes another SIGFPE to be raised, we get stuck in an infinite loop. The behaviour is certainly true on x86-64. To view this behaviour I simply added some dummy code to GDB that performed an integer divide by zero, compiled this on x86-64 GNU/Linux, ran GDB and saw GDB hang. In this commit, I propose to remove all special handling of SIGFPE and instead just let GDB make use of the default SIGFPE action, that is, to terminate the process. The only user visible change here should be: - If a user sends a SIGFPE to GDB using something like kill, previously GDB would just print an error and remain alive, now GDB will terminate. This is inline with what happens if the user sends GDB a SIGSEGV from kill though, so I don't see this as an issue. - If a bug in GDB causes a real SIGFPE, previously the users GDB session would hang. Now the GDB session will terminate. Again, this is inline with what happens if GDB receives a SIGSEGV due to an internal bug. In bug gdb/16505 there is mention that it would be nice if GDB did more than just terminate when receiving a fatal signal. I haven't done that in this commit, but later commits will move in that direction. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=16505 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17891 2021-08-11 Alan Modra PR28198, Support # as linker script comment marker PR 28198 * ldlex.l: Combine rules for handling newline, whitespace and comments. Extend # comment handling to all states. 2021-08-11 Alan Modra ldgram.y tidies I've been tripped up before thinking the "end" rule was the "END" token. Let's use a better name. The formatting changes are for consistency within rules, and making it a little easier to visually separate tokens from mid-rule actions. * ldgram.y (separator): Rename from "end". Update uses. (statement): Formatting. Move ';' match to beginning. (paren_script_name): Formatting. Simplify. (must_be_exp, section): Formatting. 2021-08-11 Alan Modra Mention whitespace in script expressions Inside an output section statement, ld's parser can't tell whether a line .+=4; is an assignment to dot or a file named ".+=4". * ld.texi (expressions): Mention need for whitespace. 2021-08-11 Matt Jacobson Add a -mno-dollar-line-separator command line option to the AVR assembler. Some frontends, like the gcc Objective-C frontend, emit symbols with $ characters in them. The AVR target code in gas treats $ as a line separator, so the code doesn?t assemble correctly. Provide a machine-specific option to disable treating $ as a line separator. * config/tc-avr.c (enum options): Add option flag. (struct option): Add option -mno-dollar-line-separator. (md_parse_option): Adjust treatment of $ when option is present. * config/tc-avr.h: Use avr_line_separator_chars. 2021-08-11 Nick Clifton Fix typo in previous delta 2021-08-11 Jan Beulich gas: fold IEEE encoding of -Inf with that of +Inf The respective results differ only by the sign bits - there's no need to have basically identical (partially even arch-specific) logic twice. Simply set the sign bit at the end of encoding the various formats. 2021-08-11 Jan Beulich gas: support NaN flavors Like for infinity, there isn't just a single NaN. The sign bit may be of interest and, going beyond infinity, whether the value is quiet or signalling may be even more relevant to be able to encode. Note that an anomaly with x86'es double extended precision NaN values gets taken care of at the same time: For all other formats a positive value with all mantissa bits set was used, while here a negative value with all non-significant mantissa bits clear was chose for an unknown reason. For m68k, since I don't know their X_PRECISION floating point value layout, a warning gets issued if any of the new flavors was attempted to be encoded that way. However likely it may be that, given that the code lives in a source file supposedly implementing IEEE-compliant formats, the bit patterns of the individual words match x86'es, I didn't want to guess so. And my very, very old paper doc doesn't even mention floating point formats other than single and double. 2021-08-11 Jan Beulich Arm64: leave .bfloat16 processing to common code With x86 support having been implemented by extending atof-ieee.c, avoid unnecessary code duplication in md_atof(). This will then also allow to take advantage of adjustments made there without needing to mirror them here. Arm32: leave more .bfloat16 processing to common code With x86 support having been implemented by extending atof-ieee.c, avoid unnecessary code duplication in md_atof(). This will then also allow to take advantage of adjustments made there without needing to mirror them here. gas: make 2nd argument of .dcb.* consistently optional Unlike the forms consuming/producing integer data, the floating point ones so far required the 2nd argument to be present, contrary to documentation. To avoid code duplication, split float_length() out of hex_float() (taking the opportunity to adjust error message wording). 2021-08-11 Jan Beulich x86: introduce .bfloat16 directive This is to be able to generate data acted upon by AVX512-BF16 and AMX-BF16 insns. While not part of the IEEE standard, the format is sufficiently standardized to warrant handling in config/atof-ieee.c. Arm, where custom handling was implemented, may want to leverage this as well. To be able to also use the hex forms supported for other floating point formats, a small addition to the generic hex_float() is needed. Extend existing x86 testcases. 2021-08-11 Jan Beulich x86: introduce .hfloat directive This is to be able to generate data passed to {,V}CVTPH2PS and acted upon by AVX512-FP16 insns. To be able to also use the hex forms supported for other floating point formats, a small addition to the generic hex_float() is needed. Extend existing x86 testcases. 2021-08-11 Jan Beulich x86/ELF: fix .tfloat output with hex input The ELF psABI-s are quite clear here: On 32-bit the data type is 12 bytes long (with 2 bytes of trailing padding), while on 64-bit it is 16 bytes long (with 6 bytes of padding). Make hex_float() capable of handling such padding. Note that this brings the emitted data size of .dc.x / .dcb.x in line also for non-ELF targets; so far they were different depending on input format (dec vs hex). Extend the existing x86 testcases. 2021-08-11 Jan Beulich x86/ELF: fix .ds.x output The ELF psABI-s are quite clear here: On 32-bit the underlying data type is 12 bytes long (with 2 bytes of trailing padding), while on 64-bit it is 16 bytes long (with 6 bytes of padding). Make s_space() capable of handling 'x' (and 'p') type floating point being other than 12 bytes wide (also adjusting documentation). This requires duplicating the definition of X_PRECISION in the target speciifc header; the compiler would complain if this was out of sync with config/atof-ieee.c. Note that for now padding space doesn't get separated from actual storage, which means that things will work correctly only for little- endian cases, and which also means that by specifying large enough numbers padding space can be set to non-zero. Since the logic is needed for a single little-endian architecture only for now, I'm hoping that this might be acceptable for the time being; otherwise the change will become more intrusive. Note also that this brings the emitted data size of .ds.x vs .tfloat in line for non-ELF targets as well; the issue will be even more obvious when further taking into account a subsequent patch fixing .dc.x/.dcb.x (where output sizes currently differ depending on input format). Extend existing x86 testcases. 2021-08-11 Jan Beulich x86/ELF: fix .tfloat output The ELF psABI-s are quite clear here: On 32-bit the data type is 12 bytes long (with 2 bytes of trailing padding), while on 64-bit it is 16 bytes long (with 6 bytes of padding). Make ieee_md_atof() capable of handling such padding, and specify the needed padding for x86 (leaving non-ELF targets alone for now). Split the existing x86 testcase. x86: have non-PE/COFF BEOS be recognized as ELF BEOS, unless explicitly requesting *-*-beospe* targets, uses standard ELF. None of the newly enabled tests in the testsuite fail for me. 2021-08-11 Alan Modra PR28163, Segment fault in function rl78_special_reloc Relocation offset checks were completely missing in the rl78 backend, allowing a relocation to write over memory anywhere. This was true for rl78_special_reloc, a function primarily used when applying debug relocations, and in rl78_elf_relocate_section used by the linker. This patch fixes those problems by correcting inaccuracies in the relocation howtos, then uses those howtos to sanity check relocation offsets before applying relocations. In addition, the patch implements overflow checking using the howto information rather than the ad-hoc scheme implemented in relocate_section. I implemented the overflow checking in rl78_special_reloc too. * elf32-rl78.c (RL78REL, RL78_OP_REL): Add mask parameter. (rl78_elf_howto_table): Set destination masks. Correct size and bitsize of DIR32_REV. Correct complain_on_overflow for many relocs as per tests in relocate_section. Add RH_SFR. Correct bitsize for RH_SADDR. Set size to 3 and bitsize to 0 for all OP relocs. (check_overflow): New function. (rl78_special_reloc): Check that reloc address is within section. Apply relocations using reloc howto. Check for overflow. (RANGE): Delete. (rl78_elf_relocate_section): Sanity check r_offset. Perform overflow checking using reloc howto. 2021-08-11 GDB Administrator Automatic date update in version.in 2021-08-10 Tom Tromey Ignore .debug_types when reading .debug_aranges I noticed that the fission-reread.exp test case can cause a complaint when run with --target_board=cc-with-debug-names: warning: Section .debug_aranges in [...]/fission-reread has duplicate debug_info_offset 0x0, ignoring .debug_aranges. The bug here is that this executable has both .debug_info and .debug_types, and both have a CU at offset 0x0. This triggers the duplicate warning. Because .debug_types doesn't provide any address ranges, these CUs can be ignored. That is, this bug turns out to be another regression from the info/types merger patch. This patch fixes the problem by having this loop igore type units. fission-reread.exp is updated to test for the bug. 2021-08-10 Tom Tromey Generalize addrmap dumping While debugging another patch series, I wanted to dump an addrmap. I came up with this patch, which generalizes the addrmap-dumping code from psymtab.c and moves it to addrmap.c. psymtab.c is changed to use the new code. 2021-08-10 Simon Marchi gdb: iterate only on vfork parent threads in handle_vfork_child_exec_or_exit I spotted what I think is a buglet in proceed_after_vfork_done. After a vfork child exits or execs, we resume all the threads of the parent. To do so, we iterate on all threads using iterate_over_threads with the proceed_after_vfork_done callback. Each thread is resumed if the following condition is true: if (thread->ptid.pid () == pid && thread->state == THREAD_RUNNING && !thread->executing && !thread->stop_requested && thread->stop_signal () == GDB_SIGNAL_0) where `pid` is the pid of the vfork parent. This is not multi-target aware: since it only filters on pid, if there is an inferior with the same pid in another target, we could end up resuming a thread of that other inferior. The chances of the stars aligning for this to happen are tiny, but still. Fix that by iterating only on the vfork parent's threads, instead of on all threads. This is more efficient, as we iterate on just the required threads (inferiors have their own thread list), and we can drop the pid check. The resulting code is also more straightforward in my opinion, so it's a win-win. Change-Id: I14647da72e2bf65592e82fbe6efb77a413a4be3a 2021-08-10 Nick Clifton Updated Serbian and Russian translations for various sub-directories 2021-08-10 George Barrett guile: fix smob exports Before Guile v2.1 [1], calls to `scm_make_smob_type' implicitly added the created class to the exports list of (oop goops); v2.1+ does not implicitly create bindings in any modules. This means that the GDB manual subsection documenting exported types is not quite right when GDB is linked against Guile * guile/scm-gsmob.c (gdbscm_make_smob_type): Export registered smob type from the current module. gdb/testsuite/ChangeLog: 2021-06-07 George Barrett * gdb.guile/scm-gsmob.exp (test exports): Add tests to make sure the smob types currently listed in the GDB manual get exported from the (gdb) module. Change-Id: I7dcd791276b48dfc9edb64fc71170bbb42a6f6e7 2021-08-10 GDB Administrator Automatic date update in version.in 2021-08-09 Nick Clifton GAS: DWARF-5: Ensure that the 0'th entry in the directory table contains the current working directory. * dwarf2dbg.c (get_directory_table_entry): Ensure that dir[0] contains current working directory. (out_dir_and_file_list): Likewise. * testsuite/gas/elf/dwarf-5-dir0.s: New test source file. * testsuite/gas/elf/dwarf-5-dir0.d: New test driver. * testsuite/gas/elf/elf.exp: Run the new test. * testsuite/gas/elf/dwarf-5-file0.d: Adjust expected output. * testsuite/gas/i386/dwarf5-line-1.d: Likewise. * testsuite/gas/i386/dwarf5-line-2.d: Likewise. 2021-08-09 GDB Administrator Automatic date update in version.in 2021-08-08 Tom Tromey Include objfiles.h in a few .c files I found a few .c files that rely on objfiles.h, but that only include it indirectly, via dwarf2/read.h -> psympriv.h. If that include is removed (something my new DWARF indexer series does), then the build will break. It seemed harmless and correct to add these includes now, making the eventual series a little smaller. 2021-08-08 GDB Administrator Automatic date update in version.in 2021-08-07 Alan Modra PR28186, SEGV elf.c:7991:30 in _bfd_elf_fixup_group_sections PR 28186 * elf.c (_bfd_elf_fixup_group_sections): Don't segfault on objcopy/strip with NULL output_section. 2021-08-07 Alan Modra PR28176, rl78 complex reloc divide by zero This is a bit more than just preventing the divide by zero. Most of the patch is tidying up error reporting, so that for example, linking an object file with a reloc stack underflow produces a linker error rather than just displaying a message that might be ignored. PR 28176 * elf32-rl78.c (RL78_STACK_PUSH, RL78_STACK_POP): Delete. (rl78_stack_push, rl78_stack_pop): New inline functions. (rl78_compute_complex_reloc): Add status and error message params. Use new inline stack handling functions. Report stack overflow or underflow, and divide by zero. (rl78_special_reloc): Return status and error message from rl78_compute_complex_reloc. (rl78_elf_relocate_section): Similarly. Modernise reloc error reporting. Delete unused bfd_reloc_other case. Don't assume DIR24S_PCREL overflow is due to undefined function. (rl78_offset_for_reloc): Adjust to suit rl78_compute_complex_reloc. 2021-08-07 GDB Administrator Automatic date update in version.in 2021-08-06 Tom de Vries [gdb/symtab] Recognize .gdb_index symbol table with empty entries as empty When reading a .gdb_index that contains a non-empty symbol table with only empty entries, gdb doesn't recognize it as empty. Fix this by recognizing that the constant pool is empty, and then setting the symbol table to empty. Tested on x86_64-linux. gdb/ChangeLog: 2021-08-01 Tom de Vries PR symtab/28159 * dwarf2/read.c (read_gdb_index_from_buffer): Handle symbol table filled with empty entries. gdb/testsuite/ChangeLog: 2021-08-01 Tom de Vries PR symtab/28159 * gdb.dwarf2/dw2-zero-range.exp: Remove kfail. 2021-08-06 Tom Tromey Unconditionally define _initialize_addrmap The way that init.c is generated does not allow for an initialization function to be conditionally defined -- doing so will result in a link error. This patch fixes a build problem that arises from such a conditional definition. It can be reproduce with --disable-unit-tests. 2021-08-06 Tom de Vries [gdb/symtab] Fix zero address complaint for shlib In PR28004 the following warning / Internal error is reported: ... $ gdb -q -batch \ -iex "set sysroot $(pwd -P)/repro" \ ./repro/gdb \ ./repro/core \ -ex bt ... Program terminated with signal SIGABRT, Aborted. #0 0x00007ff8fe8e5d22 in raise () from repro/usr/lib/libc.so.6 [Current thread is 1 (LWP 1762498)] #1 0x00007ff8fe8cf862 in abort () from repro/usr/lib/libc.so.6 warning: (Internal error: pc 0x7ff8feb2c21d in read in psymtab, \ but not in symtab.) warning: (Internal error: pc 0x7ff8feb2c218 in read in psymtab, \ but not in symtab.) ... #2 0x00007ff8feb2c21e in __gnu_debug::_Error_formatter::_M_error() const \ [clone .cold] (warning: (Internal error: pc 0x7ff8feb2c21d in read in \ psymtab, but not in symtab.) ) from repro/usr/lib/libstdc++.so.6 ... The warning is about the following: - in find_pc_sect_compunit_symtab we try to find the address (0x7ff8feb2c218 / 0x7ff8feb2c21d) in the symtabs. - that fails, so we try again in the partial symtabs. - we find a matching partial symtab - however, the partial symtab has a full symtab, so we should have found a matching symtab in the first step. The addresses are: ... (gdb) info sym 0x7ff8feb2c218 __gnu_debug::_Error_formatter::_M_error() const [clone .cold] in \ section .text of repro/usr/lib/libstdc++.so.6 (gdb) info sym 0x7ff8feb2c21d __gnu_debug::_Error_formatter::_M_error() const [clone .cold] + 5 in \ section .text of repro/usr/lib/libstdc++.so.6 ... which correspond to unrelocated addresses 0x9c218 and 0x9c21d: ... $ nm -C repro/usr/lib/libstdc++.so.6.0.29 | grep 000000000009c218 000000000009c218 t __gnu_debug::_Error_formatter::_M_error() const \ [clone .cold] ... which belong to function __gnu_debug::_Error_formatter::_M_error() in /build/gcc/src/gcc/libstdc++-v3/src/c++11/debug.cc. The partial symtab that is found for the addresses is instead the one for /build/gcc/src/gcc/libstdc++-v3/src/c++98/bitmap_allocator.cc, which is incorrect. This happens as follows. The bitmap_allocator.cc CU has DW_AT_ranges at .debug_rnglist offset 0x4b50: ... 00004b50 0000000000000000 0000000000000056 00004b5a 00000000000a4790 00000000000a479c 00004b64 00000000000a47a0 00000000000a47ac ... When reading the first range 0x0..0x56, it doesn't trigger the "start address of zero" complaint here: ... /* A not-uncommon case of bad debug info. Don't pollute the addrmap with bad data. */ if (range_beginning + baseaddr == 0 && !per_objfile->per_bfd->has_section_at_zero) { complaint (_(".debug_rnglists entry has start address of zero" " [in module %s]"), objfile_name (objfile)); continue; } ... because baseaddr != 0, which seems incorrect given that when loading the shared library individually in gdb (and consequently baseaddr == 0), we do see the complaint. Consequently, we run into this case in dwarf2_get_pc_bounds: ... if (low == 0 && !per_objfile->per_bfd->has_section_at_zero) return PC_BOUNDS_INVALID; ... which then results in this code in process_psymtab_comp_unit_reader being called with cu_bounds_kind == PC_BOUNDS_INVALID, which sets the set_addrmap argument to 1: ... scan_partial_symbols (first_die, &lowpc, &highpc, cu_bounds_kind <= PC_BOUNDS_INVALID, cu); ... and consequently, the CU addrmap gets build using address info from the functions. During that process, addrmap_set_empty is called with a range that includes 0x9c218 and 0x9c21d: ... (gdb) p /x start $7 = 0x9989c (gdb) p /x end_inclusive $8 = 0xb200d ... but it's called for a function at DIE 0x54153 with DW_AT_ranges at 0x40ae: ... 000040ae 00000000000b1ee0 00000000000b200e 000040b9 000000000009989c 00000000000998c4 000040c3 ... and neither range includes 0x9c218 and 0x9c21d. This is caused by this code in partial_die_info::read: ... if (dwarf2_ranges_read (ranges_offset, &lowpc, &highpc, cu, nullptr, tag)) has_pc_info = 1; ... which pretends that the function is located at addresses 0x9989c..0xb200d, which is indeed not the case. This patch fixes the first problem encountered: fix the "start address of zero" complaint warning by removing the baseaddr part from the condition. Same for dwarf2_ranges_process. The effect is that: - the complaint is triggered, and - the warning / Internal error is no longer triggered. This does not fix the observed problem in partial_die_info::read, which is filed as PR28200. Tested on x86_64-linux. Co-Authored-By: Simon Marchi gdb/ChangeLog: 2021-07-29 Simon Marchi Tom de Vries PR symtab/28004 * gdb/dwarf2/read.c (dwarf2_rnglists_process, dwarf2_ranges_process): Fix zero address complaint. * gdb/testsuite/gdb.dwarf2/dw2-zero-range-shlib.c: New test. * gdb/testsuite/gdb.dwarf2/dw2-zero-range.c: New test. * gdb/testsuite/gdb.dwarf2/dw2-zero-range.exp: New file. 2021-08-06 Alan Modra Re: Add tests for Intel AVX512_FP16 instructions * testsuite/gas/i386/x86-64-avx512_fp16_pseudo_ops.d: Pass with mingw section padding. 2021-08-06 Alan Modra chew ubsan warning It matters not at all if pc is incremented from its initial NULL value, but avoid this silly runtime ubsan error. * doc/chew.c (perform): Avoid incrementing NULL pc. 2021-08-06 Alan Modra bfd_reloc_offset_in_range overflow This patch is more about the style of bounds checking we ought to use, rather than a real problem. An overflow of "octet + reloc_size" can only happen with huge sections which would certainly cause out of memory errors. * reloc.c (bfd_reloc_offset_in_range): Avoid possible overflow. 2021-08-06 Alan Modra PR28175, Segment fault in coff-tic30.c reloc_processing The obj_convert table shouldn't be accessed without first checking the index against the table size. PR 28175 * coff-tic30.c (reloc_processing): Sanity check reloc symbol index. * coff-z80.c (reloc_processing): Likewise. * coff-z8k.c (reloc_processing): Likewise. 2021-08-06 Alan Modra PR28173, nds32_elf_howto_table index out of bounds Indexing the howto table was seriously broken by a missing entry, and use of assertions about user input rather than testing the input. PR 28173 * elf32-nds32.c (nds32_elf_howto_table): Add missing empty howto. (bfd_elf32_bfd_reloc_type_table_lookup): Replace assertions with range checks. Return NULL if unsupported reloc type. Remove dead code. Take an unsigned int param. (nds32_info_to_howto_rel): Test for NULL howto or howto name return from lookup. Remove assertion. (nds32_info_to_howto): Remove unnecessary ATTRIBUTE_UNUSED. Test for NULL howto or howto name return from lookup. 2021-08-06 Alan Modra PR28172, bfin_pcrel24_reloc heap-buffer-overflow bfin pcrel24 relocs are weird, they apply to the reloc address minus two. That means reloc addresses of 0 and 1 are invalid. Check that, and fix other reloc range checking. PR 28172 * elf32-bfin.c (bfin_pcrel24_reloc): Correct reloc range check. (bfin_imm16_reloc, bfin_byte4_reloc, bfin_bfd_reloc): Likewise. (bfin_final_link_relocate): Likewise. 2021-08-06 GDB Administrator Automatic date update in version.in 2021-08-05 Will Schmidt [PATCH] GDB Testsuite, update compile-cplus.exp [PATCH] GDB Testsuite, update compile-cplus.exp Update the gdb.compile/compile-cplus.exp test to handle errors generated when passing bad arguments into the gdb-compile command. This matches changes made to gdb.compile/compile.exp in the past as part of "Migrate rest of compile commands to new options framework" e6ed716cd5514c08b9d7c469d185b1aa177dbc22 2021-08-05 Will Schmidt [gdb] Handle .TOC. sections during gdb-compile for rs6000 target. [gdb] Handle .TOC. sections during gdb-compile for rs6000 target. When we encounter a .TOC. symbol in the object we are loading, we need to associate this with the .toc section in order to properly resolve other symbols in the object. IF a .toc section is not found, iterate the sections until we find one with the SEC_ALLOC flag. If that also fails, fall back to using the *ABS* section, pointed to by bfd_abs_section_ptr. 2021-08-05 Simon Marchi gdb/testsuite: gdb.base/attach.exp: expose bug when testing with native-extended-gdbserver In gdb.base/attach.exp, proc do_attach_failure_tests, we attach to a process. When then try to attach to the same process in another inferior, expecting it to fail. We then come back to the first inferior and try to kill it, to clean up the test. When using the native-extended-gdbserver board, this "kill" test passes, even though it didn't actually work: add-inferior [New inferior 2] Added inferior 2 on connection 1 (extended-remote localhost:2347) (gdb) PASS: gdb.base/attach.exp: do_attach_failure_tests: add empty inferior 2 inferior 2 [Switching to inferior 2 [] ()] (gdb) PASS: gdb.base/attach.exp: do_attach_failure_tests: switch to inferior 2 attach 817032 Attaching to process 817032 Attaching to process 817032 failed (gdb) PASS: gdb.base/attach.exp: do_attach_failure_tests: fail to attach again inferior 1 [Switching to inferior 1 [process 817032] (/home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/attach/attach)] [Switching to thread 1.1 (Thread 817032.817032)] #0 main () at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/attach.c:19 19 while (! should_exit) (gdb) PASS: gdb.base/attach.exp: do_attach_failure_tests: switch to inferior 1 kill Kill the program being debugged? (y or n) y Remote connection closed <==== That's unexpected (gdb) PASS: gdb.base/attach.exp: do_attach_failure_tests: exit after attach failures When the second attach fails, gdbserver seems to break the connection (it hangs up on the existing remote target) and start listening again for incoming connections. This is documented in PR 19558 [1]. Make the expected output regexp for the kill command tighter (it currently accepts anything). Use "set confirm off" so we don't have to deal with the confirmation. And to be really sure the extended-remote target still works, try to run the inferior again after killing. The now tests are kfail'ed when the target is gdbserver. [1] https://sourceware.org/bugzilla/show_bug.cgi?id=19558 gdb/testsuite/ChangeLog: * gdb.base/attach.exp (do_attach_failure_tests): Make kill regexp tighter, run inferior after killing it. Kfail when target is gdbserver. Change-Id: I99c5cd3968ce2ec962ace35b016f842a243b7a0d 2021-08-05 Simon Marchi gdb/testsuite: gdb.base/attach.exp: fix support check in test_command_line_attach_run When running this test with the native-extended-gdbserver, we get: main () at /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/attach.c:19 19 while (! should_exit) The program being debugged has been started already. Start it from the beginning? (y or n) PASS: gdb.base/attach.exp: cmdline attach run: run to prompt y Don't know how to run. Try "help target". (gdb) FAIL: gdb.base/attach.exp: cmdline attach run: run to main This test tests using both "-p " and "-ex start" on the command line, making sure that we first attach and then run. Normally, after that "y", we should see the program running again. However, a particuliarity of the native-extended-gdbserver is that it uses "set auto-connect-native-target off" on the command line. The full GDB command line is: ./gdb -nw -nx -data-directory /home/simark/build/binutils-gdb/gdb/testsuite/../data-directory \ -iex set height 0 -iex set width 0 -ex set auto-connect-native-target off \ -ex set sysroot -quiet -iex set height 0 -iex set width 0 --pid=536609 -ex start The attach succeeds. I guess it is done before "set auto-connect-native-target off", or it somehow bypasses it. When the "start" is executed, the native target is unpushed, while killing the existing process, but not re-pushed, due to "set auto-connect-native-target off". So we get that "Don't know how to run" message. Really, I think it's a case of the test doing things incompatible with the board, I think it should just be skipped. And as we can see with the current code, there were some attempts at doing this, just using the wrong checks: - isnative: this is a dejagnu proc which checks if the target board has the same triplet as the build machine. In the case of native-extended-gdbserver, it does. - is_remote target: this checks whether the target board is remote, as in executing on a different machin. native-extended-gdbserver is not remote. Since the --pid option specifically attaches to a process using the native target, change the test to use gdb_is_target_native instead. gdb/testsuite/ChangeLog: * gdb.base/attach.exp (test_command_line_attach_run): Use gdb_is_target_native to check if test is supported. Change-Id: I762e127f39623889999dc9ed2185540a0951bfb0 2021-08-05 Simon Marchi gdb: target_waitstatus_to_string: print extra info for FORKED, VFORKED, EXECD Print the extra information contained in target_waitstatus for these events. For TARGET_WAITKIND_{FORKED,VFORKED}, the extra information is contained in related_pid, and is the ptid of the new process. For TARGET_WAITKIND_EXECD, it,s the exec'd path name in execd_pathname. Print it using the same format used for TARGET_WAITKIND_STOPPED and others. Here are sample outputs for all three events: [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) = [infrun] print_target_wait_results: 726890.726890.0 [process 726890], [infrun] print_target_wait_results: status->kind = vforked, related_pid = 726894.726894.0 [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) = [infrun] print_target_wait_results: 727045.727045.0 [process 727045], [infrun] print_target_wait_results: status->kind = forked, related_pid = 727049.727049.0 [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) = [infrun] print_target_wait_results: 727119.727119.0 [process 727119], [infrun] print_target_wait_results: status->kind = execd, execd_pathname = /usr/bin/ls Change-Id: I4416a74e3bf792a625a68bf26c51689e170f2184 2021-08-05 Simon Marchi gdb: use ptid_t::to_string in print_target_wait_results The ptid_t::to_string method was introduced recently, to format a ptid_t for debug purposes. It formats the ptid exactly as is done in print_target_wait_results, so make print_target_wait_results use it. Change-Id: I0a81c8040d3e1858fb304cb28366b34d94eefe4d 2021-08-05 Zoran Zaric Add as_lval argument to expression evaluator There are cases where the result of the expression evaluation is expected to be in a form of a value and not location description. One place that has this requirement is dwarf_entry_parameter_to_value function, but more are expected in the future. Until now, this requirement was fulfilled by extending the evaluated expression with a DW_OP_stack_value operation at the end. New implementation, introduces a new evaluation argument instead. * dwarf2/expr.c (dwarf_expr_context::fetch_result): Add as_lval argument. (dwarf_expr_context::eval_exp): Add as_lval argument. * dwarf2/expr.h (struct dwarf_expr_context): Add as_lval argument to fetch_result and eval_exp methods. * dwarf2/frame.c (execute_stack_op): Add as_lval argument. * dwarf2/loc.c (dwarf_entry_parameter_to_value): Remove DWARF expression extension. (dwarf2_evaluate_loc_desc_full): Add as_lval argument support. (dwarf2_evaluate_loc_desc): Add as_lval argument support. (dwarf2_locexpr_baton_eval): Add as_lval argument support. 2021-08-05 Zoran Zaric Simplify dwarf_expr_context class interface Idea of this patch is to get a clean and simple public interface for the dwarf_expr_context class, looking like: - constructor, - destructor, - push_address method and - evaluate method. Where constructor should only ever require a target architecture information. This information is held in per object file (dwarf2_per_objfile) structure, so it makes sense to keep that structure as a constructor argument. It also makes sense to get the address size from that structure, but unfortunately that interface doesn't exist at the moment, so the dwarf_expr_context class user needs to provide that information. The push_address method is used to push a CORE_ADDR as a value on top of the DWARF stack before the evaluation. This method can be later changed to push any struct value object on the stack. The evaluate method is the method that evaluates a DWARF expression and provides the evaluation result, in a form of a single struct value object that describes a location. To do this, the method requires a context of the evaluation, as well as expected result type information. If the type information is not provided, the DWARF generic type will be used instead. To avoid storing the gdbarch information in the evaluator object, that information is now always acquired from the per_objfile object. All data members are now private and only visible to the evaluator class, so a m_ prefix was added to all of their names to reflect that. To make this distinction clear, they are also accessed through objects this pointer, wherever that was not the case before. gdb/ChangeLog: * dwarf2/expr.c (dwarf_expr_context::dwarf_expr_context): Add address size argument. (dwarf_expr_context::read_mem): Change to use property_addr_info structure. (dwarf_expr_context::evaluate): New function. (dwarf_expr_context::execute_stack_op): Change to use property_addr_info structure. * dwarf2/expr.h (struct dwarf_expr_context): New evaluate declaration. Change eval and fetch_result method to private. (dwarf_expr_context::gdbarch): Remove member. (dwarf_expr_context::stack): Make private and add m_ prefix. (dwarf_expr_context::addr_size): Make private and add m_ prefix. (dwarf_expr_context::recursion_depth): Make private and add m_ prefix. (dwarf_expr_context::max_recursion_depth): Make private and add m_ prefix. (dwarf_expr_context::len): Make private and add m_ prefix. (dwarf_expr_context::data): Make private and add m_ prefix. (dwarf_expr_context::initialized): Make private and add m_ prefix. (dwarf_expr_context::pieces): Make private and add m_ prefix. (dwarf_expr_context::per_objfile): Make private and add m_ prefix. (dwarf_expr_context::frame): Make private and add m_ prefix. (dwarf_expr_context::per_cu): Make private and add m_ prefix. (dwarf_expr_context::addr_info): Make private and add m_ prefix. * dwarf2/frame.c (execute_stack_op): Change to call evaluate method. * dwarf2/loc.c (dwarf2_evaluate_loc_desc_full): Change to call evaluate method. (dwarf2_locexpr_baton_eval): Change to call evaluate method. 2021-08-05 Zoran Zaric Make DWARF evaluator return a single struct value The patch is addressing the issue of class users writing and reading the internal data of the dwarf_expr_context class. At this point, all conditions are met for the DWARF evaluator to return an evaluation result in a form of a single struct value object. gdb/ChangeLog: * dwarf2/expr.c (pieced_value_funcs): Chenge to static function. (allocate_piece_closure): Change to static function. (dwarf_expr_context::fetch_result): New function. * dwarf2/expr.h (struct piece_closure): Remove declaration. (struct dwarf_expr_context): fetch_result new declaration. fetch, fetch_address and fetch_in_stack_memory members move to private. (allocate_piece_closure): Remove. * dwarf2/frame.c (execute_stack_op): Change to use fetch_result. * dwarf2/loc.c (dwarf2_evaluate_loc_desc_full): Change to use fetch_result. (dwarf2_locexpr_baton_eval): Change to use fetch_result. * dwarf2/loc.h (invalid_synthetic_pointer): Expose function. 2021-08-05 Zoran Zaric Make value_copy also copy the stack data member Fixing a bug where the value_copy function did not copy the stack data and initialized members of the struct value. This is needed for the next patch where the DWARF expression evaluator is changed to return a single struct value object. * value.c (value_copy): Change to also copy the stack data and initialized members. 2021-08-05 Zoran Zaric Move piece_closure and its support to expr.c Following 5 patches series is trying to clean up the interface of the DWARF expression evaluator class (dwarf_expr_context). After merging all expression evaluators into one class, the next logical step is to make a clean user interface for that class. To do that, we first need to address the issue of class users writing and reading the internal data of the class directly. Fixing the case of writing is simple, it makes sense for an evaluator instance to be per architecture basis. Currently, the best separation seems to be per object file, so having that data (dwarf2_per_objfile) as a constructor argument makes sense. It also makes sense to get the address size from that object file, but unfortunately that interface does not exist at the moment. Luckily, address size information is already available to the users through other means. As a result, the address size also needs to be a class constructor argument, at least until a better interface for acquiring that information from an object file is implemented. The rest of the user written data comes down to a context of an evaluated expression (compilation unit context, frame context and passed in buffer context) and a source type information that a result of evaluating expression is representing. So, it makes sense for all of these to be arguments of an evaluation method. To address the problem of reading the dwarf_expr_context class internal data, we first need to understand why it is implemented that way? This is actualy a question of which existing class can be used to represent both values and a location descriptions and why it is not used currently? The answer is in a struct value class/structure, but the problem is that before the evaluators were merged, only one evaluator had an infrastructure to resolve composite and implicit pointer location descriptions. After the merge, we are now able to use the struct value to represent any result of the expression evaluation. It also makes sense to move all infrastructure for those location descriptions to the expr.c file considering that that is the only place using that infrastructure. What we are left with in the end is a clean public interface of the dwarf_expr_context class containing: - constructor, - destructor, - push_address method and - eval_exp method. The idea with this particular patch is to move piece_closure structure and the interface that handles it (lval_funcs) to expr.c file. While implicit pointer location descriptions are still not useful in the CFI context (of the AMD's DWARF standard extensions), the composite location descriptions are certainly necessary to describe a results of specific compiler optimizations. Considering that a piece_closure structure is used to represent both, there was no benefit in splitting them. gdb/ChangeLog: * dwarf2/expr.c (struct piece_closure): Add from loc.c. (allocate_piece_closure): Add from loc.c. (bits_to_bytes): Add from loc.c. (rw_pieced_value): Add from loc.c. (read_pieced_value): Add from loc.c. (write_pieced_value): Add from loc.c. (check_pieced_synthetic_pointer): Add from loc.c. (indirect_pieced_value): Add from loc.c. (coerce_pieced_ref): Add from loc.c. (copy_pieced_value_closure): Add from loc.c. (free_pieced_value_closure): Add from loc.c. (sect_variable_value): Add from loc.c. * dwarf2/loc.c (sect_variable_value): Move to expr.c. (struct piece_closure): Move to expr.c. (allocate_piece_closure): Move to expr.c. (bits_to_bytes): Move to expr.c. (rw_pieced_value): Move to expr.c. (read_pieced_value): Move to expr.c. (write_pieced_value): Move to expr.c. (check_pieced_synthetic_pointer): Move to expr.c. (indirect_pieced_value): Move to expr.c. (coerce_pieced_ref): Move to expr.c. (copy_pieced_value_closure): Move to expr.c. (free_pieced_value_closure): Move to expr.c. 2021-08-05 Zoran Zaric Merge evaluate_for_locexpr_baton evaluator The evaluate_for_locexpr_baton is the last derived class from the dwarf_expr_context class. It's purpose is to support the passed in buffer functionality. Although, it is not really necessary to merge this class with it's base class, doing that simplifies new expression evaluator design. Considering that this functionality is going around the DWARF standard, it is also reasonable to expect that with a new evaluator design and extending the push object address functionality to accept any location description, there will be no need to support passed in buffers. Alternatively, it would also makes sense to abstract the interaction between the evaluator and a given resource in the near future. The passed in buffer would then be a specialization of that abstraction. gdb/ChangeLog: * dwarf2/expr.c (dwarf_expr_context::read_mem): Merge with evaluate_for_locexpr_baton implementation. * dwarf2/loc.c (class evaluate_for_locexpr_baton): Remove class. (evaluate_for_locexpr_baton::read_mem): Move to dwarf_expr_context. (dwarf2_locexpr_baton_eval): Instantiate dwarf_expr_context instead of evaluate_for_locexpr_baton class. 2021-08-05 Zoran Zaric Remove empty frame and full evaluators There are no virtual methods that require different specialization in dwarf_expr_context class. This means that derived classes dwarf_expr_executor and dwarf_evaluate_loc_desc are not needed any more. As a result of this, the evaluate_for_locexpr_baton class base class is now the dwarf_expr_context class. There might be a need for a better class hierarchy when we know more about the direction of the future DWARF versions and gdb extensions, but that is out of the scope of this patch series. gdb/ChangeLog: * dwarf2/frame.c (class dwarf_expr_executor): Remove class. (execute_stack_op): Instantiate dwarf_expr_context instead of dwarf_evaluate_loc_desc class. * dwarf2/loc.c (class dwarf_evaluate_loc_desc): Remove class. (dwarf2_evaluate_loc_desc_full): Instantiate dwarf_expr_context instead of dwarf_evaluate_loc_desc class. (struct evaluate_for_locexpr_baton): Derive from dwarf_expr_context. 2021-08-05 Zoran Zaric Inline get_reg_value method of dwarf_expr_context The get_reg_value method is a small function that is only called once, so it can be inlined to simplify the dwarf_expr_context class. gdb/ChangeLog: * dwarf2/expr.c (dwarf_expr_context::get_reg_value): Remove method. (dwarf_expr_context::execute_stack_op): Inline get_reg_value method. * dwarf2/expr.h (dwarf_expr_context::get_reg_value): Remove method. 2021-08-05 Zoran Zaric Move push_dwarf_reg_entry_value to expr.c Following the idea of merging the evaluators, the push_dwarf_reg_entry_value method can be moved from dwarf_expr_executor and dwarf_evaluate_loc_desc classes to their base class dwarf_expr_context. gdb/ChangeLog: * dwarf2/expr.c (dwarf_expr_context::push_dwarf_reg_entry_value): Move from dwarf_evaluate_loc_desc. * dwarf2/frame.c (dwarf_expr_executor::push_dwarf_reg_entry_value): Remove method. * dwarf2/loc.c (dwarf_expr_reg_to_entry_parameter): Expose function. (dwarf_evaluate_loc_desc::push_dwarf_reg_entry_value): Move to dwarf_expr_context. * dwarf2/loc.h (dwarf_expr_reg_to_entry_parameter): Expose function. 2021-08-05 Zoran Zaric Move read_mem to dwarf_expr_context Following the idea of merging the evaluators, the read_mem method can be moved from dwarf_expr_executor and dwarf_evaluate_loc_desc classes to their base class dwarf_expr_context. gdb/ChangeLog: * dwarf2/expr.c (dwarf_expr_context::read_mem): Move from dwarf_evaluate_loc_desc. * dwarf2/frame.c (dwarf_expr_executor::read_mem): Remove method. * dwarf2/loc.c (dwarf_evaluate_loc_desc::read_mem): Move to dwarf_expr_context. 2021-08-05 Zoran Zaric Move get_object_address to dwarf_expr_context Following the idea of merging the evaluators, the get_object_address and can be moved from dwarf_expr_executor and dwarf_evaluate_loc_desc classes to their base class dwarf_expr_context. gdb/ChangeLog: * dwarf2/expr.c (dwarf_expr_context::get_object_address): Move from dwarf_evaluate_loc_desc. (class dwarf_expr_context): Add object address member to dwarf_expr_context. * dwarf2/expr.h (dwarf_expr_context::get_frame_pc): Remove method. * dwarf2/frame.c (dwarf_expr_executor::get_object_address): Remove method. * dwarf2/loc.c (dwarf_evaluate_loc_desc::get_object_address): move to dwarf_expr_context. (class dwarf_evaluate_loc_desc): Move object address member to dwarf_expr_context. 2021-08-05 Zoran Zaric Move dwarf_call to dwarf_expr_context Following the idea of merging the evaluators, the dwarf_call and get_frame_pc method can be moved from dwarf_expr_executor and dwarf_evaluate_loc_desc classes to their base class dwarf_expr_context. Once this is done, the get_frame_pc can be replace with lambda function. gdb/ChangeLog: * dwarf2/expr.c (dwarf_expr_context::dwarf_call): Move from dwarf_evaluate_loc_desc. (dwarf_expr_context::get_frame_pc): Replace with lambda. * dwarf2/expr.h (dwarf_expr_context::get_frame_pc): Remove method. * dwarf2/frame.c (dwarf_expr_executor::dwarf_call): Remove method. (dwarf_expr_executor::get_frame_pc): Remove method. * dwarf2/loc.c (dwarf_evaluate_loc_desc::get_frame_pc): Remove method. (dwarf_evaluate_loc_desc::dwarf_call): Move to dwarf_expr_context. (per_cu_dwarf_call): Inline function. 2021-08-05 Zoran Zaric Move compilation unit info to dwarf_expr_context This patch moves the compilation unit context information and support from dwarf_expr_executor and dwarf_evaluate_loc_desc to dwarf_expr_context evaluator. The idea is to report an error when a given operation requires a compilation unit information to be resolved, which is not available. With this change, it also makes sense to always acquire ref_addr_size information from the compilation unit context, considering that all DWARF operations that refer to that information require a compilation unit context to be present during their evaluation. gdb/ChangeLog: * dwarf2/expr.c (ensure_have_per_cu): New function. (dwarf_expr_context::dwarf_expr_context): Add compilation unit context information. (dwarf_expr_context::get_base_type): Move from dwarf_evaluate_loc_desc. (dwarf_expr_context::get_addr_index): Remove method. (dwarf_expr_context::dwarf_variable_value): Remove method. (dwarf_expr_context::execute_stack_op): Call compilation unit context info check. Inline get_addr_index and dwarf_variable_value methods. * dwarf2/expr.h (struct dwarf_expr_context): Add compilation context info. (dwarf_expr_context::get_addr_index): Remove method. (dwarf_expr_context::dwarf_variable_value): Remove method. (dwarf_expr_context::ref_addr_size): Remove member. * dwarf2/frame.c (dwarf_expr_executor::get_addr_index): Remove method. (dwarf_expr_executor::dwarf_variable_value): Remove method. * dwarf2/loc.c (sect_variable_value): Expose function. (dwarf_evaluate_loc_desc::get_addr_index): Remove method. (dwarf_evaluate_loc_desc::dwarf_variable_value): Remove method. (class dwarf_evaluate_loc_desc): Move compilation unit context information to dwarf_expr_context class. * dwarf2/loc.h (sect_variable_value): Expose function. 2021-08-05 Zoran Zaric Remove get_frame_cfa from dwarf_expr_context Following the idea of merging the evaluators, the get_frame_cfa method can be moved from dwarf_expr_executor and dwarf_evaluate_loc_desc classes to their base class dwarf_expr_context. Once this is done, it becomes apparent that the method is only called once and it can be inlined. It is also necessary to check if the frame context information was provided before the DW_OP_call_frame_cfa operation is executed. gdb/ChangeLog: * dwarf2/expr.c (dwarf_expr_context::get_frame_cfa): Remove method. (dwarf_expr_context::execute_stack_op): Call frame context info check for DW_OP_call_frame_cfa. Remove use of get_frame_cfa. * dwarf2/expr.h (dwarf_expr_context::get_frame_cfa): Remove method. * dwarf2/frame.c (dwarf_expr_context::get_frame_cfa): Remove method. * dwarf2/loc.c (dwarf_expr_context::get_frame_cfa): Remove method. 2021-08-05 Zoran Zaric Move frame context info to dwarf_expr_context Following 15 patches in this patch series is cleaning up the design of the DWARF expression evaluator (dwarf_expr_context) to make future extensions of that evaluator easier and cleaner to implement. There are three subclasses of the dwarf_expr_context class (dwarf_expr_executor, dwarf_evaluate_loc_desc and evaluate_for_locexpr_baton). Here is a short description of each class: - dwarf_expr_executor is evaluating a DWARF expression in a context of a Call Frame Information. The overridden methods of this subclass report an error if a specific DWARF operation, represented by that method, is not allowed in a CFI context. The source code of this subclass lacks the support for composite as well as implicit pointer location description. - dwarf_evaluate_loc_desc can evaluate any expression with no restrictions. All of the methods that this subclass overrides are actually doing what they are intended to do. This subclass contains a full support for all location description types. - evaluate_for_locexpr_baton subclass is a specialization of the dwarf_evaluate_loc_desc subclass and it's function is to add support for passed in buffers. This seems to be a way to go around the fact that DWARF standard lacks a bit offset support for memory location descriptions as well as using any location description for the push object address functionality. It all comes down to this question: what is a function of a DWARF expression evaluator? Is it to evaluate the expression in a given context or to check the correctness of that expression in that context? Currently, the only reason why there is a dwarf_expr_executor subclass is to report an invalid DWARF expression in a context of a CFI, but is that what the evaluator is supposed to do considering that the evaluator is not tied to a given DWARF version? There are more and more vendor and GNU extensions that are not part of the DWARF standard, so is it that impossible to expect that some of the extensions could actually lift the previously imposed restrictions of the CFI context? Not to mention that every new DWARF version is lifting some restrictions anyway. The thing that makes more sense for an evaluator to do, is to take the context of an evaluation and checks the requirements of every operation evaluated against that context. With this approach, the evaluator would report an error only if parts of the context, necessary for the evaluation, are missing. If this approach is taken, then the unification of the dwarf_evaluate_loc_desc, dwarf_expr_executor and dwarf_expr_context is the next logical step. This makes a design of the DWARF expression evaluator cleaner and allows more flexibility when supporting future vendor and GNU extensions. Additional benefit here is that now all evaluators have access to all location description types, which means that a vendor extended CFI rules could support composite location description as well. This also means that a new evaluator interface can be changed to return a single struct value (that describes the result of the evaluation) instead of a caller poking around the dwarf_expr_context internal data for answers (like it is done currently). This patch starts the merging process by moving the frame context information and support from dwarf_expr_executor and dwarf_evaluate_loc_desc to dwarf_expr_context evaluator. The idea is to report an error when a given operation requires a frame information to be resolved, if that information is not present. gdb/ChangeLog: * dwarf2/expr.c (ensure_have_frame): New function. (read_addr_from_reg): Add from frame.c. (dwarf_expr_context::dwarf_expr_context): Add frame info to dwarf_expr_context. (dwarf_expr_context::read_addr_from_reg): Remove. (dwarf_expr_context::get_reg_value): Move from dwarf_evaluate_loc_desc. (dwarf_expr_context::get_frame_base): Move from dwarf_evaluate_loc_desc. (dwarf_expr_context::execute_stack_op): Call frame context info check. Remove use of read_addr_from_reg method. * dwarf2/expr.h (struct dwarf_expr_context): Add frame info member, read_addr_from_reg, get_reg_value and get_frame_base declaration. (read_addr_from_reg): Move to expr.c. * dwarf2/frame.c (read_addr_from_reg): Move to dwarf_expr_context. (dwarf_expr_executor::read_addr_from_reg): Remove. (dwarf_expr_executor::get_frame_base): Remove. (dwarf_expr_executor::get_reg_value): Remove. (execute_stack_op): Use read_addr_from_reg function instead of read_addr_from_reg method. * dwarf2/loc.c (dwarf_evaluate_loc_desc::get_frame_base): Move to dwarf_expr_context. (dwarf_evaluate_loc_desc::get_reg_value): Move to dwarf_expr_context. (dwarf_evaluate_loc_desc::read_addr_from_reg): Remove. (dwarf2_locexpr_baton_eval):Use read_addr_from_reg function instead of read_addr_from_reg method. 2021-08-05 Zoran Zaric Cleanup of the dwarf_expr_context constructor Move the initial values for dwarf_expr_context class data members to the class declaration in expr.h. gdb/ChangeLog: * dwarf2/expr.c (dwarf_expr_context::dwarf_expr_context): Remove initial data members values. * dwarf2/expr.h (dwarf_expr_context): Add initial values to the class data members. 2021-08-05 Zoran Zaric Replace the symbol needs evaluator with a parser This patch addresses a design problem with the symbol_needs_eval_context class. It exposes the problem by introducing two new testsuite test cases. To explain the issue, I first need to explain the dwarf_expr_context class that the symbol_needs_eval_context class derives from. The intention behind the dwarf_expr_context class is to commonize the DWARF expression evaluation mechanism for different evaluation contexts. Currently in gdb, the evaluation context can contain some or all of the following information: architecture, object file, frame and compilation unit. Depending on the information needed to evaluate a given expression, there are currently three distinct DWARF expression evaluators:  - Frame: designed to evaluate an expression in the context of a call    frame information (dwarf_expr_executor class). This evaluator doesn't    need a compilation unit information.  - Location description: designed to evaluate an expression in the    context of a source level information (dwarf_evaluate_loc_desc    class). This evaluator expects all information needed for the    evaluation of the given expression to be present.  - Symbol needs: designed to answer a question about the parts of the    context information required to evaluate a DWARF expression behind a    given symbol (symbol_needs_eval_context class). This evaluator    doesn't need a frame information. The functional difference between the symbol needs evaluator and the others is that this evaluator is not meant to interact with the actual target. Instead, it is supposed to check which parts of the context information are needed for the given DWARF expression to be evaluated by the location description evaluator. The idea is to take advantage of the existing dwarf_expr_context evaluation mechanism and to fake all required interactions with the actual target, by returning back dummy values. The evaluation result is returned as one of three possible values, based on operations found in a given expression: - SYMBOL_NEEDS_NONE, - SYMBOL_NEEDS_REGISTERS and - SYMBOL_NEEDS_FRAME. The problem here is that faking results of target interactions can yield an incorrect evaluation result. For example, if we have a conditional DWARF expression, where the condition depends on a value read from an actual target, and the true branch of the condition requires a frame information to be evaluated, while the false branch doesn't, fake target reads could conclude that a frame information is not needed, where in fact it is. This wrong information would then cause the expression to be actually evaluated (by the location description evaluator) with a missing frame information. This would then crash the debugger. The gdb.dwarf2/symbol_needs_eval_fail.exp test introduces this scenario, with the following DWARF expression:                    DW_OP_addr $some_variable                    DW_OP_deref                    # conditional jump to DW_OP_bregx                    DW_OP_bra 4                    DW_OP_lit0                    # jump to DW_OP_stack_value                    DW_OP_skip 3                    DW_OP_bregx $dwarf_regnum 0                    DW_OP_stack_value This expression describes a case where some variable dictates the location of another variable. Depending on a value of some_variable, the variable whose location is described by this expression is either read from a register or it is defined as a constant value 0. In both cases, the value will be returned as an implicit location description on the DWARF stack. Currently, when the symbol needs evaluator fakes a memory read from the address behind the some_variable variable, the constant value 0 is used as the value of the variable A, and the check returns the SYMBOL_NEEDS_NONE result. This is clearly a wrong result and it causes the debugger to crash. The scenario might sound strange to some people, but it comes from a SIMD/SIMT architecture where $some_variable is an execution mask.  In any case, it is a valid DWARF expression, and GDB shouldn't crash while evaluating it. Also, a similar example could be made based on a condition of the frame base value, where if that value is concluded to be 0, the variable location could be defaulted to a TLS based memory address. The gdb.dwarf2/symbol_needs_eval_timeout.exp test introduces a second scenario. This scenario is a bit more abstract due to the DWARF assembler lacking the CFI support, but it exposes a different manifestation of the same problem. Like in the previous scenario, the DWARF expression used in the test is valid:                        DW_OP_lit1                        DW_OP_addr $some_variable                        DW_OP_deref                        # jump to DW_OP_fbreg                        DW_OP_skip 4                        DW_OP_drop                        DW_OP_fbreg 0                        DW_OP_dup                        DW_OP_lit0                        DW_OP_eq                        # conditional jump to DW_OP_drop                        DW_OP_bra -9                        DW_OP_stack_value Similarly to the previous scenario, the location of a variable A is an implicit location description with a constant value that depends on a value held by a global variable. The difference from the previous case is that DWARF expression contains a loop instead of just one branch. The end condition of that loop depends on the expectation that a frame base value is never zero. Currently, the act of faking the target reads will cause the symbol needs evaluator to get stuck in an infinite loop. Somebody could argue that we could change the fake reads to return something else, but that would only hide the real problem. The general impression seems to be that the desired design is to have one class that deals with parsing of the DWARF expression, while there are virtual methods that deal with specifics of some operations. Using an evaluator mechanism here doesn't seem to be correct, because the act of evaluation relies on accessing the data from the actual target with the possibility of skipping the evaluation of some parts of the expression. To better explain the proposed solution for the issue, I first need to explain a couple more details behind the current design: There are multiple places in gdb that handle DWARF expression parsing for different purposes. Some are in charge of converting the expression to some other internal representation (decode_location_expression, disassemble_dwarf_expression and dwarf2_compile_expr_to_ax), some are analysing the expression for specific information (compute_stack_depth_worker) and some are in charge of evaluating the expression in a given context (dwarf_expr_context::execute_stack_op and decode_locdesc). The problem is that all those functions have a similar (large) switch statement that handles each DWARF expression operation. The result of this is a code duplication and harder maintenance. As a step into the right direction to solve this problem (at least for the purpose of a DWARF expression evaluation) the expression parsing was commonized inside of an evaluator base class (dwarf_expr_context). This makes sense for all derived classes, except for the symbol needs evaluator (symbol_needs_eval_context) class. As described previously the problem with this evaluator is that if the evaluator is not allowed to access the actual target, it is not really evaluating. Instead, the desired function of a symbol needs evaluator seems to fall more into expression analysis category. This means that a more natural fit for this evaluator is to be a symbol needs analysis, similar to the existing compute_stack_depth_worker analysis. Another problem is that using a heavyweight mechanism of an evaluator to do an expression analysis seems to be an unneeded overhead. It also requires a more complicated design of the parent class to support fake target reads. The reality is that the whole symbol_needs_eval_context class can be replaced with a lightweight recursive analysis function, that will give more correct result without compromising the design of the dwarf_expr_context class. The analysis treats the expression byte stream as a DWARF operation graph, where each graph node can be visited only once and each operation can decide if the frame context is needed for their evaluation. The downside of this approach is adding of one more similar switch statement, but at least this way the new symbol needs analysis will be a lightweight mechnism and it will provide a correct result for any given DWARF expression. A more desired long term design would be to have one class that deals with parsing of the DWARF expression, while there would be a virtual methods that deal with specifics of some DWARF operations. Then that class would be used as a base for all DWARF expression parsing mentioned at the beginning. This however, requires a far bigger changes that are out of the scope of this patch series. The new analysis requires the DWARF location description for the argc argument of the main function to change in the assembly file gdb.python/amd64-py-framefilter-invalidarg.S. Originally, expression ended with a 0 value byte, which was never reached by the symbol needs evaluator, because it was detecting a stack underflow when evaluating the operation before. The new approach does not simulate a DWARF stack anymore, so the 0 value byte needs to be removed because it makes the DWARF expression invalid. gdb/ChangeLog: * dwarf2/loc.c (class symbol_needs_eval_context): Remove. (dwarf2_get_symbol_read_needs): New function. (dwarf2_loc_desc_get_symbol_read_needs): Remove. (locexpr_get_symbol_read_needs): Use dwarf2_get_symbol_read_needs. gdb/testsuite/ChangeLog: * gdb.python/amd64-py-framefilter-invalidarg.S : Update argc DWARF location expression. * lib/dwarf.exp (_location): Handle DW_OP_fbreg. * gdb.dwarf2/symbol_needs_eval.c: New file. * gdb.dwarf2/symbol_needs_eval_fail.exp: New file. * gdb.dwarf2/symbol_needs_eval_timeout.exp: New file. 2021-08-05 Cui,Lili [PATCH 2/2] Add tests for Intel AVX512_FP16 instructions Intel AVX512 FP16 instructions use maps 3, 5 and 6. Maps 5 and 6 use 3 bits in the EVEX.mmm field (0b101, 0b110). Map 5 is for instructions that were FP32 in map 1 (0Fxx). Map 6 is for instructions that were FP32 in map 2 (0F38xx). There are some exceptions to this rule. Some things in map 1 (0Fxx) with imm8 operands predated our current conventions; those instructions moved to map 3. FP32 things in map 3 (0F3Axx) found new opcodes in map3 for FP16 because map3 is very sparsely populated. Most of the FP16 instructions share opcodes and prefix (EVEX.pp) bits with the related FP32 operations. Intel AVX512 FP16 instructions has new displacements scaling rules, please refer to the public software developer manual for detail information. gas/ 2021-08-05 Igor Tsimbalist H.J. Lu Wei Xiao Lili Cui * testsuite/gas/i386/i386.exp: Run FP16 tests. * testsuite/gas/i386/avx512_fp16-intel.d: New test. * testsuite/gas/i386/avx512_fp16-inval-bcast.l: Ditto. * testsuite/gas/i386/avx512_fp16-inval-bcast.s: Ditto. * testsuite/gas/i386/avx512_fp16.d: Ditto. * testsuite/gas/i386/avx512_fp16.s: Ditto. * testsuite/gas/i386/avx512_fp16_pseudo_ops.d: Ditto. * testsuite/gas/i386/avx512_fp16_pseudo_ops.s: Ditto. * testsuite/gas/i386/avx512_fp16_vl-intel.d: Ditto. * testsuite/gas/i386/avx512_fp16_vl.d: Ditto. * testsuite/gas/i386/avx512_fp16_vl.s: Ditto. * testsuite/gas/i386/x86-64-avx512_fp16-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx512_fp16-inval-bcast.l: Ditto. * testsuite/gas/i386/x86-64-avx512_fp16-inval-bcast.s: Ditto. * testsuite/gas/i386/x86-64-avx512_fp16.d: Ditto. * testsuite/gas/i386/x86-64-avx512_fp16.s: Ditto. * testsuite/gas/i386/x86-64-avx512_fp16_pseudo_ops.d: Ditto. * testsuite/gas/i386/x86-64-avx512_fp16_pseudo_ops.s: Ditto. * testsuite/gas/i386/x86-64-avx512_fp16_vl-intel.d: Ditto. * testsuite/gas/i386/x86-64-avx512_fp16_vl.d: Ditto. * testsuite/gas/i386/x86-64-avx512_fp16_vl.s: Ditto. * testsuite/gas/i386/x86-64-avx512_fp16-inval-register.l: Ditto. * testsuite/gas/i386/x86-64-avx512_fp16-inval-register.s: Ditto. * testsuite/gas/i386/x86-64-avx512_fp16-bad.d: Ditto. * testsuite/gas/i386/x86-64-avx512_fp16-bad.s: Ditto. * testsuite/gas/i386/x86-64-default-suffix-avx.d: Add new testcase. * testsuite/gas/i386/x86-64-default-suffix.d: Ditto. * testsuite/gas/i386/x86-64-default-suffix.s: Ditto. * testsuite/gas/i386/xmmword.l: Ditto. * testsuite/gas/i386/xmmword.s: Ditto. 2021-08-05 Cui,Lili [PATCH 1/2] Enable Intel AVX512_FP16 instructions Intel AVX512 FP16 instructions use maps 3, 5 and 6. Maps 5 and 6 use 3 bits in the EVEX.mmm field (0b101, 0b110). Map 5 is for instructions that were FP32 in map 1 (0Fxx). Map 6 is for instructions that were FP32 in map 2 (0F38xx). There are some exceptions to this rule. Some things in map 1 (0Fxx) with imm8 operands predated our current conventions; those instructions moved to map 3. FP32 things in map 3 (0F3Axx) found new opcodes in map3 for FP16 because map3 is very sparsely populated. Most of the FP16 instructions share opcodes and prefix (EVEX.pp) bits with the related FP32 operations. Intel AVX512 FP16 instructions has new displacements scaling rules, please refer to the public software developer manual for detail information. gas/ 2021-08-05 Igor Tsimbalist H.J. Lu Wei Xiao Lili Cui * config/tc-i386.c (struct Broadcast_Operation): Adjust comment. (cpu_arch): Add .avx512_fp16. (cpu_noarch): Add noavx512_fp16. (pte): Add evexmap5 and evexmap6. (build_evex_prefix): Handle EVEXMAP5 and EVEXMAP6. (check_VecOperations): Handle {1to32}. (check_VecOperands): Handle CheckRegNumb. (check_word_reg): Handle Toqword. (i386_error): Add invalid_dest_and_src_register_set. (match_template): Handle invalid_dest_and_src_register_set. * doc/c-i386.texi: Document avx512_fp16, noavx512_fp16. opcodes/ 2021-08-05 Igor Tsimbalist H.J. Lu Wei Xiao Lili Cui * i386-dis.c (EXwScalarS): New. (EXxh): Ditto. (EXxhc): Ditto. (EXxmmqh): Ditto. (EXxmmqdh): Ditto. (EXEvexXwb): Ditto. (DistinctDest_Fixup): Ditto. (enum): Add xh_mode, evex_half_bcst_xmmqh_mode, evex_half_bcst_xmmqdh_mode and w_swap_mode. (enum): Add PREFIX_EVEX_0F3A08_W_0, PREFIX_EVEX_0F3A0A_W_0, PREFIX_EVEX_0F3A26, PREFIX_EVEX_0F3A27, PREFIX_EVEX_0F3A56, PREFIX_EVEX_0F3A57, PREFIX_EVEX_0F3A66, PREFIX_EVEX_0F3A67, PREFIX_EVEX_0F3AC2, PREFIX_EVEX_MAP5_10, PREFIX_EVEX_MAP5_11, PREFIX_EVEX_MAP5_1D, PREFIX_EVEX_MAP5_2A, PREFIX_EVEX_MAP5_2C, PREFIX_EVEX_MAP5_2D, PREFIX_EVEX_MAP5_2E, PREFIX_EVEX_MAP5_2F, PREFIX_EVEX_MAP5_51, PREFIX_EVEX_MAP5_58, PREFIX_EVEX_MAP5_59, PREFIX_EVEX_MAP5_5A_W_0, PREFIX_EVEX_MAP5_5A_W_1, PREFIX_EVEX_MAP5_5B_W_0, PREFIX_EVEX_MAP5_5B_W_1, PREFIX_EVEX_MAP5_5C, PREFIX_EVEX_MAP5_5D, PREFIX_EVEX_MAP5_5E, PREFIX_EVEX_MAP5_5F, PREFIX_EVEX_MAP5_78, PREFIX_EVEX_MAP5_79, PREFIX_EVEX_MAP5_7A, PREFIX_EVEX_MAP5_7B, PREFIX_EVEX_MAP5_7C, PREFIX_EVEX_MAP5_7D_W_0, PREFIX_EVEX_MAP6_13, PREFIX_EVEX_MAP6_56, PREFIX_EVEX_MAP6_57, PREFIX_EVEX_MAP6_D6, PREFIX_EVEX_MAP6_D7 (enum): Add EVEX_MAP5 and EVEX_MAP6. (enum): Add EVEX_W_MAP5_5A, EVEX_W_MAP5_5B, EVEX_W_MAP5_78_P_0, EVEX_W_MAP5_78_P_2, EVEX_W_MAP5_79_P_0, EVEX_W_MAP5_79_P_2, EVEX_W_MAP5_7A_P_2, EVEX_W_MAP5_7A_P_3, EVEX_W_MAP5_7B_P_2, EVEX_W_MAP5_7C_P_0, EVEX_W_MAP5_7C_P_2, EVEX_W_MAP5_7D, EVEX_W_MAP6_13_P_0, EVEX_W_MAP6_13_P_2, (get_valid_dis386): Properly handle new instructions. (intel_operand_size): Handle new modes. (OP_E_memory): Ditto. (OP_EX): Ditto. * i386-dis-evex.h: Updated for AVX512_FP16. * i386-dis-evex-mod.h: Updated for AVX512_FP16. * i386-dis-evex-prefix.h: Updated for AVX512_FP16. * i386-dis-evex-reg.h : Updated for AVX512_FP16. * i386-dis-evex-w.h : Updated for AVX512_FP16. * i386-gen.c (cpu_flag_init): Add CPU_AVX512_FP16_FLAGS, and CPU_ANY_AVX512_FP16_FLAGS. Update CPU_ANY_AVX512F_FLAGS and CPU_ANY_AVX512BW_FLAGS. (cpu_flags): Add CpuAVX512_FP16. (opcode_modifiers): Add DistinctDest. * i386-opc.h (enum): (AVX512_FP16): New. (i386_opcode_modifier): Add reqdistinctreg. (i386_cpu_flags): Add cpuavx512_fp16. (EVEXMAP5): Defined as a macro. (EVEXMAP6): Ditto. * i386-opc.tbl: Add Intel AVX512_FP16 instructions. * i386-init.h: Regenerated. * i386-tbl.h: Ditto. 2021-08-05 Alan Modra PR28167, vms-alpha build_module_list PR 28167 * vms-alpha.c (build_module_list): Malloc and free section contents. Don't read past end of section. 2021-08-05 Alan Modra PR28166, _bfd_elf_mips_get_relocated_section_contents Some of the code paths unpacking mips relocs left arelent->sym_ptr_ptr uninitialised. PR 28166 * elf64-mips.c (mips_elf64_slurp_one_reloc_table): Don't leave sym_ptr_ptr uninitialised. 2021-08-05 Alan Modra PR28165, buffer overflow in elf32-rx.c:rx_info_to_howto_rela PR 28165 * elf32-rx.c (rx_elf_howto_table): Add missing empty entries. (rx_info_to_howto_rela): Assert rx_elf_howto_table is correct size. Use actual size when sanity checking r_type. 2021-08-05 Alan Modra Re: elf: Treat undefined version as hidden Fix fallout in cris testsuite PR binutils/28158 * ld-cris/libdso-1c.d: Update for version display change. * ld-cris/libdso-15b.d: Likewise. 2021-08-05 Andrew Burgess gdb/testsuite: update test gdb.base/step-over-syscall.exp I was looking at PR gdb/19675 and the related test gdb.base/step-over-syscall.exp. This test includes a call to kfail when we are testing a displaced step over a clone syscall. While looking at the test I removed the call to kfail and ran the test, and was surprised that the test passed. I ran the test a few times and it does sometimes fail, but mostly it passed fine. PR gdb/19675 describes how, when we displaced step over a clone, the new thread is created with a $pc in the displaced step buffer. GDB then fails to "fix" this $pc (for the new thread), and the thread will be set running with its current $pc value. This means that the new thread will just start executing from whatever happens to be after the displaced stepping buffer. In the original PR gdb/19675 bug report Yao Qi was seeing the new thread cause a segfault, the problem is, what actually happens is totally undefined. On my machine, I'm seeing the new thread reenter main, it then starts trying to run the test again (in the new thread). This just happens to be safe enough (in this simple test) that most of the time the inferior doesn't crash. In this commit I try to make the test slightly more likely to fail by doing a couple of things. First, I added a static variable to main, this is set true when the first thread enters main, if a second thread ever enters main then I force an abort. Second, when the test is finishing I want to ensure that the new threads have had a chance to do "something bad" if they are going to. So I added a global counter, as each thread starts successfully it decrements the counter. The main thread does not proceed to the final marker function (where GDB has placed a breakpoint) until all threads have started successfully. This means that if the newly created thread doesn't successfully enter clone_fn then the counter will never reach zero and the test will timeout. With these two changes my hope is that the test should fail more reliably, and so, I have also changed the test to call setup_kfail before the specific steps that we expect to misbehave instead of just calling kfail and skipping parts of the test completely. The benefit of this is that if/when we fix GDB this test will start to KPASS and we'll know to update this test to remove the setup_kfail call. 2021-08-05 GDB Administrator Automatic date update in version.in 2021-08-05 Lancelot SIX gdb: Use unwinder name in frame_info::to_string While working on a stack unwinding issue using 'set debug frame on', I noticed the frame_info::to_string method could be slightly improved. Unwinders have been given a name in a154d838a70e96d888620c072e2d6ea8bdf044ca. Before this patch, frame_info debug output prints the host address of the used unwinder, which is not easy to interpret. This patch proposes to use the unwinder name instead since we now have it. Before the patch: {level=1,type=NORMAL_FRAME,unwind=0x2ac1763ec0,pc=0x3ff7fc3460,id={stack=0x3ff7ea79b0,code=0x0000003ff7fc33ac,!special},func=0x3ff7fc33ac} With the patch: {level=1,type=NORMAL_FRAME,unwinder="riscv prologue",pc=0x3ff7fc3460,id={stack=0x3ff7ea79b0,code=0x0000003ff7fc33ac,!special},func=0x3ff7fc33ac} Tested on riscv64-linux-gnu. 2021-08-04 Simon Marchi gdb/testsuite: fix gdb.base/info-macros.exp with clang The test gdb.base/info-macros.exp says that it doesn't pass the "debug" option to prepare_for_testing because that would cause -g to appear after -g3 on the command line, and that would cause some gcc versions to not include macro info. I don't know what gcc versions this refers to. I tested with gcc 4.8, and that works fine with -g after -g3. The current state is problematic when testing with CC_FOR_TARGET=clang, because then only -fdebug-macro is included. No -g switch if included, meaning we get a binary without any debug info, and the test fails. One way to fix it would be to add "debug" to the options when the compiler is clang. However, the solution I chose was to specify "debug" in any case, even for gcc. Other macro tests such as gdb.base/macscp.exp do perfectly fine with it. Also, this lets the test use the debug flag specified by the board file. For example, we can test with GCC and DWARF 5, with: $ make check RUNTESTFLAGS="--target_board unix/gdb:debug_flags=-gdwarf-5" TESTS="gdb.base/info-macros.exp" With the hard-coded -g3, this wouldn't actually test with DWARF 5. Change-Id: I33fa92ee545007d3ae9c52c4bb2d5be6b5b698f1 2021-08-04 Simon Marchi gdb: avoid dereferencing empty str_offsets_base optional in dwarf_decode_macros Since 4d7188abfdf2 ("gdbsupport: add debug assertions in gdb::optional::get"), some macro-related tests fail on Ubuntu 20.04 with the system gcc 9.3.0 compiler when building with _GLIBCXX_DEBUG. For example, gdb.base/info-macros.exp results in: (gdb) break -qualified main /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/gdb_optional.h:206: internal-error: T& gdb::optional::get() [with T = long unsigned int]: Assertion `this->has_value ()' failed. The binary contains DWARF 4 debug info and includes a pre-standard (pre-DWARF 5) .debug_macro section. The CU doesn't have a DW_AT_str_offsets_base attribute (which doesn't exist in DWARF 4). The field dwarf2_cu::str_offsets_base is therefore empty. At dwarf2/read.c:24138, we unconditionally read the value in the optional, which triggers the assertion shown above. The same thing happens when building the test program with DWARF 5 with the same gcc compiler, as that version of gcc doesn't use indirect string forms, even with DWARF 5. So it still doesn't add a DW_AT_str_offsets_base attribute on the CU. Fix that by propagating down a gdb::optional for the str offsets base instead of ULONGEST. That value is only used in dwarf_decode_macro_bytes, when encountering an "strx" macro operation (DW_MACRO_define_strx or DW_MACRO_undef_strx). Add a check there that we indeed have a value in the optional before reading it. This is unlikely to happen, but could happen in theory with an erroneous file that uses DW_MACRO_define_strx but does not provide a DW_AT_str_offsets_base (in practice, some things would probably have failed before and stopped processing of debug info). I tested the complaint by inverting the condition and using a clang-compiled binary, which uses the strx operators. This is the result: During symbol reading: use of DW_MACRO_define_strx with unknown string offsets base [in module /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/info-macros/info-macros] The test now passes cleanly with the setup mentioned above, and the testsuite looks on par with how it was before 4d7188abfdf2. Change-Id: I7ebd2724beb7b9b4178872374c2a177aea696e77 2021-08-04 Simon Marchi gdb: fix typo in complaint in dwarf2/macro.c I saw this complaint when my code had some bug, and spotted the typo. Fix it, and while at it mention DW_MACRO as well (it would be confusing to only see DW_MACINFO with a file that uses a DWARF 5 .debug_macro section). I contemplated the idea of passing the knowledge of whether we are dealing with a .debug_macro section or .debug_macinfo section, to print only the right one. But in the end, I don't think that trouble is necessary for a complaint nobody is going to see. Change-Id: I276ce8da65c3eac5304f64a1e246358ed29cdbbc 2021-08-04 Simon Marchi gdb: fix warnings in bsd-kvm.c Building on OpenBSD, I get warnings like: CXX bsd-kvm.o /home/simark/src/binutils-gdb/gdb/bsd-kvm.c:241:18: error: ISO C++11 does not allow conversion from string literal to 'char *' [-Werror,-Wwritable-strings] nl[0].n_name = "_dumppcb"; ^ Silence those by adding casts. Change-Id: I2bef4eebcc306762a4e3e5b5c52f67ecf2820503 2021-08-04 Andreas Krebbel IBM Z: Remove lpswey parameter opcodes/ * s390-opc.c (INSTR_SIY_RD): New instruction format. (MASK_SIY_RD): New instruction mask. * s390-opc.txt: Change instruction format of lpswey to SIY_RD. gas/ * testsuite/gas/s390/zarch-arch14.d: Remove last operand of lpswey. * testsuite/gas/s390/zarch-arch14.s: Likewise. 2021-08-04 Alan Modra PR28162, segment fault in mips_elf_assign_gp For the testcase in the PR, _bfd_mips_elf32_gprel16_reloc is passed a NULL output_bfd. As expected for reloc special functions if called by objdump or when final linking. The function attempts to find the output by output_bfd = symbol->section->output_section->owner; That makes some sense, since when handling a gp-relative reloc we need the relevant gp to which the symbol is relative. Possibly the gp value can be one for a shared library? But that doesn't seem useful or supported by the various abi docs and won't work as written. Symbols defined in shared libraries have section->output_section NULL, and what's more the code in mips_elf_assign_gp isn't set up to look at shared library symbols. Also, if the symbol is a SHN_ABS one the owner of *ABS* section is NULL, which will result in the testcase segfault. The only gp to which an absolute symbol can be relative is the linker output bfd when linking, or the input bfd when not. This patch arranges to do that for all gp-relative reloc symbols. * elf32-mips.c (_bfd_mips_elf32_gprel16_reloc): Don't use the section symbol to find the output bfd, use input_section. (mips_elf_gprel32_reloc, mips16_gprel_reloc): Likewise. * elf64-mips.c (mips_elf64_gprel16_reloc): Likewise. (mips_elf64_literal_reloc, mips_elf64_gprel32_reloc): Likewise. (mips16_gprel_reloc): Likewise. 2021-08-04 Tom de Vries [gdb/symtab] Use lambda function instead of addrmap_foreach_check Use a lambda function instead of addrmap_foreach_check, which removes the need for static variables. Also remove unnecessary static on local var temp_obstack in test_addrmap. gdb/ChangeLog: 2021-08-04 Tom de Vries * addrmap.c (addrmap_foreach_check): Remove. (array, val1, val2): Move ... (test_addrmap): ... here. Remove static on temp_obstack. Use lambda function instead of addrmap_foreach_check. 2021-08-04 H.J. Lu elf: Treat undefined version as hidden Since undefined version can't be used to resolve any references without the original definition, treat it as hidden. bfd/ PR binutils/28158 * elf.c (_bfd_elf_get_symbol_version_string): Treat undefined version as hidden. ld/ PR binutils/28158 * testsuite/ld-elf/linux-x86.exp: Run PR binutils/28158 tests. * testsuite/ld-elf/pr28158-1.c: New file. * testsuite/ld-elf/pr28158-2.S: Likewise. * testsuite/ld-elf/pr28158.nd: Likewise. * testsuite/ld-elf/pr28158.rd: Likewise. * testsuite/ld-elf/pr28158.t: Likewise. * testsuite/ld-elfvers/vers2.dsym: Updated. * testsuite/ld-elfvers/vers3.dsym: Likewise. * testsuite/ld-elfvers/vers6.dsym: Likewise. * testsuite/ld-elfvers/vers19.dsym: Likewise. * testsuite/ld-elfvers/vers22.dsym: Likewise. * testsuite/ld-elfvers/vers23.dsym: Likewise. * testsuite/ld-elfvers/vers23d.dsym: Likewise. * testsuite/ld-elfvers/vers27d4.dsym: Likewise. * testsuite/ld-elfvers/vers28c.dsym: Likewise. 2021-08-04 Tom de Vries [gdb/symtab] Implement addrmap_mutable_find Currently addrmap_mutable_find is not implemented: ... static void * addrmap_mutable_find (struct addrmap *self, CORE_ADDR addr) { /* Not needed yet. */ internal_error (__FILE__, __LINE__, _("addrmap_find is not implemented yet " "for mutable addrmaps")); } ... I implemented this because I needed it during debugging, to be able to do: ... (gdb) p ((dwarf2_psymtab *)addrmap_find (map, addr))->filename ... before and after a call to addrmap_set_empty. Since this is not used otherwise, added addrmap unit test. Build on x86_64-linux, tested by doing: ... $ gdb -q -batch -ex "maint selftest addrmap" Running selftest addrmap. Ran 1 unit tests, 0 failed ... gdb/ChangeLog: 2021-08-03 Tom de Vries * gdb/addrmap.c (addrmap_mutable_find): Implement [GDB_SELF_TESTS] (CHECK_ADDRMAP_FIND): New macro. [GDB_SELF_TESTS] (core_addr, addrmap_foreach_check, test_addrmap) (_initialize_addrmap): New function. 2021-08-04 Clément Chigot gas: correctly output XCOFF tbss symbols with XTY_CM type. Global tbss symbols weren't correctly handled and were generating a symbol with XTY_SD instead of XTY_CM as expected. gas/ * config/tc-ppc.c (ppc_frog_symbol): Generate a XTY_CM when a symbol has a storage class of XMC_UL. 2021-08-04 Clément Chigot gas: always add dummy symbols when creating XCOFF sections. Most of the algorithms for XCOFF in tc-ppc.c assume that the csects field of a ppc_xcoff_section isn't NULL. This was already made for most of the sections with the creation of a dummy symbol. This patch simply mades it default when creating a xcoff_section. gas/ * config/tc-ppc.c (ppc_init_xcoff_section): Always create the dummy symbol. (md_begin): Adjust ppc_init_xcoff_section call. (ppc_comm): Likewise. (ppc_change_csect): Likewise. 2021-08-04 Alan Modra PR28156, rename.c doesn't compile with MinGW Guard against lack of struct timespec definition. PR 28156 * rename.c (get_stat_atime, get_stat_mtime): Don't compile unless HAVE_UTIMENSAT is defined. 2021-08-04 Alan Modra PR28155, Superfluous "the" in the man page PR 28155 * ld.texi (Options ): Correct grammar. revise PE IMAGE_SCN_LNK_NRELOC_OVFL test * coffcode.h (coff_set_alignment_hook): Test that the resulting reloc count is not less than 0xffff. 2021-08-04 Simon Marchi gdb: follow-fork: push target and add thread in target_follow_fork In the context of ROCm-gdb [1], the ROCm target sits on top of the linux-nat target. when a process forks, it needs to carry over some data from the forking inferior to the fork child inferior. Ideally, the ROCm target would implement the follow_fork target_ops method, but there are some small problems. This patch fixes these, which helps the ROCm target, but also makes things more consistent and a bit nicer in general, I believe. The main problem is: when follow-fork-mode is "parent", target_follow_fork is called with the parent as the current inferior. When it's "child", target_follow_fork is called with the child as the current inferior. This means that target_follow_fork is sometimes called on the parent's target stack and sometimes on the child's target stack. The parent's target stack may contain targets above the process target, such as the ROCm target. So if follow-fork-child is "parent", the ROCm target would get notified of the fork and do whatever is needed. But the child's target stack, at that moment, only contains the exec and process target copied over from the parent. The child's target stack is set up by follow_fork_inferior, before calling target_follow_fork. In that case, the ROCm target wouldn't get notified of the fork. For consistency, I think it would be good to always call target_follow_fork on the parent inferior's target stack. I think it makes sense as a way to indicate "this inferior has called fork, do whatever is needed". The desired outcome of the fork (whether an inferior is created for the child, do we need to detach from the child) can be indicated by passed parameter. I therefore propose these changes: - make follow_fork_inferior always call target_follow_fork with the parent as the current inferior. That lets all targets present on the parent's target stack do some fork-related handling and push themselves on the fork child's target stack if needed. For this purpose, pass the child inferior down to target_follow_fork and follow_fork implementations. This is nullptr if no inferior is created for the child, because we want to detach from it. - as a result, in follow_fork_inferior, detach from the parent inferior (if needed) only after the target_follow_fork call. This is needed because we want to call target_follow_fork before the parent's target stack is torn down. - hand over to the targets in the parent's target stack (including the process target) the responsibility to push themselves, if needed, to the child's target stack. Also hand over the responsibility to the process target, at the same time, to create the child's initial thread (just like we do for follow_exec). - pass the child inferior to exec_on_vfork, so we don't need to swap the current inferior between parent and child. Nothing in exec_on_vfork depends on the current inferior, after this change. Although this could perhaps be replaced with just having the exec target implement follow_fork and push itself in the child's target stack, like the process target does... We would just need to make sure the process target calls beneath()->follow_fork(...). I'm not sure about this one. gdb/ChangeLog: * target.h (struct target_ops) : Add inferior* parameter. (target_follow_fork): Likewise. * target.c (default_follow_fork): Likewise. (target_follow_fork): Likewise. * fbsd-nat.h (class fbsd_nat_target) : Likewise. (fbsd_nat_target::follow_fork): Likewise, and call inf_ptrace_target::follow_fork. * linux-nat.h (class linux_nat_target) : Likewise. * linux-nat.c (linux_nat_target::follow_fork): Likewise, and call inf_ptrace_target::follow_fork. * obsd-nat.h (obsd_nat_target) : Likewise. * obsd-nat.c (obsd_nat_target::follow_fork): Likewise, and call inf_ptrace_target::follow_fork. * remote.c (class remote_target) : Likewise. (remote_target::follow_fork): Likewise, and call process_stratum_target::follow_fork. * process-stratum-target.h (class process_stratum_target) : New. * process-stratum-target.c (process_stratum_target::follow_fork): New. * target-delegates.c: Re-generate. [1] https://github.com/ROCm-Developer-Tools/ROCgdb Change-Id: I460bd0af850f0485e8aed4b24c6d8262a4c69929 2021-08-04 GDB Administrator Automatic date update in version.in 2021-08-03 Carl Love Fixes for mi-fortran-modules.exp fixes Output has additional information for a given filename. gdb/testsuite/ChangeLog * gdb.mi/mi-fortran-modules.exp (system_modules_pattern, system_module_symbols_pattern): Add check for additional symbols on the line 2021-08-03 Simon Marchi gdbsupport: add debug assertions in gdb::optional::get The libstdc++ version of optional contains some runtime checks enabled when _GLIBCXX_DEBUG is defined. I think it would be useful if our version contained similar checks. Add checks in the two `get` methods, also conditional on _GLIBCXX_DEBUG. I think it's simpler to use that macro rather than introducing a new GDB-specific one, as I think that if somebody is interested in enabling these runtime checks, they'll also be interested in enabling the libstdc++ runtime checks (and vice-versa). I implemented these checks using gdb_assert. Note that gdb_assert throws (after querying the user), and we are in noexcept methods. That means that std::terminate / abort will immediately be called. I think this is ok, since if those were "real" _GLIBCXX_DEBUG checks, abort would be called straight away. If I add a dummy failure, it looks like so: $ ./gdb -q -nx --data-directory=data-directory /home/simark/src/binutils-gdb/gdb/../gdbsupport/gdb_optional.h:206: internal-error: T& gdb::optional::get() [with T = int]: Assertion `this->has_value ()' failed. A problem internal to GDB has been detected, further debugging may prove unreliable. Quit this debugging session? (y or n) n [1] 658767 abort (core dumped) ./gdb -q -nx --data-directory=data-directory Change-Id: Iadfdcd131425bd2ca6a2de30d7b22e9b3cc67793 2021-08-03 Alok Kumar Sharma [gdb/testsuite] templates.exp to accept clang++ output Please consider below testcase with intended error. `````````` constexpr const char cstring[] = "Eta"; template class Column {}; using quick = Column; // cstring without '&' void lookup() { quick c1; c1.ls(); } `````````` It produces below error. `````````` no member named 'ls' in 'Column<&cstring, double>'. `````````` Please note that error message contains '&' for cstring, which is absent in actual program. Clang++ does not generate & in such cases and this should also be accepted as correct output. gdb/testsuite/ChangeLog: * gdb.cp/templates.exp: Accept different but correct output from the Clang++ compiled binary also. 2021-08-03 GDB Administrator Automatic date update in version.in 2021-08-02 Tom Tromey Handle compiler-generated suffixes in Ada names The compiler may add a suffix to a mangled name. A typical example would be splitting a function and creating a ".cold" variant. This patch changes Ada decoding (aka demangling) to handle these suffixes. It also changes the encoding process to handle them as well. A symbol like "function.cold" will now be displayed to the user as "function[cold]". The "." is not simply preserved because that is already used in Ada. 2021-08-02 Tom Tromey Remove uses of fprintf_symbol_filtered I believe that many calls to fprintf_symbol_filtered are incorrect. In particular, there are some that pass a symbol's print name, like: fprintf_symbol_filtered (gdb_stdout, sym->print_name (), current_language->la_language, DMGL_ANSI); fprintf_symbol_filtered uses the "demangle" global to decide whether or not to demangle -- but print_name does this as well. This can lead to double-demangling. Normally this could be innocuous, except I also plan to change Ada demangling in a way that causes this to fail. 2021-08-02 Tom Tromey Handle type qualifier for enumeration name Pierre-Marie noticed that the Ada expression "TYPE'(NAME)" resolved incorrectly when "TYPE" was an enumeration type. Here, "NAME" should be unambiguous. This patch fixes this problem. Note that the patch is not perfect -- it does not give an error if TYPE is an enumeration type but NAME is not an enumerator but does have some other meaning in scope. Fixing this proved difficult, and so I've left it out. 2021-08-02 Tom Tromey Remove the type_qualifier global The type_qualifier global is no longer needed in the Ada expression parser, so this removes it. 2021-08-02 Tom Tromey Defer Ada character literal resolution In Ada, an enumeration type can use a character literal as one of the enumerators. The Ada expression parser handles the appropriate conversion. It turns out, though, that this conversion was handled incorrectly. For an expression like TYPE'(EXP), the conversion would be done for any such literal appearing in EXP -- but only the outermost such expression should really be affected. This patch defers the conversion until the resolution phase, fixing the bug. 2021-08-02 Tom Tromey Refactor Ada resolution In a subsequent patch, it will be convenient if an Ada expression operation can supply its own replacement object. This patch refactors Ada expression resolution to make this possible. Remove add_symbols_from_enclosing_procs I noticed that add_symbols_from_enclosing_procs is empty, and can be removed. The one caller, ada_add_local_symbols, can also be simplified, removing some code that, I think, was an incorrect attempt to handle nested functions. 2021-08-02 Tom Tromey Avoid crash in varobj deletion PR varobj/28131 points out a crash in the varobj deletion code. It took a while to reproduce this, but essentially what happens is that a top-level varobj deletes its root object, then deletes the "dynamic" object. However, deletion of the dynamic object may cause ~py_varobj_iter to run, which in turn uses gdbpy_enter_varobj: gdbpy_enter_varobj::gdbpy_enter_varobj (const struct varobj *var) : gdbpy_enter (var->root->exp->gdbarch, var->root->exp->language_defn) { } However, because var->root has already been destroyed, this is invalid. I've added a new test case. This doesn't reliably crash, but the problem can easily be seen under valgrind (and, I presume, with ASAN, though I did not try this). Tested on x86-64 Fedora 32. I also propose putting this on the GDB 11 branch, with a suitable ChangeLog entry of course. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28131 2021-08-02 Tom de Vries [gdb/testsuite] Fix gdb.dwarf2/dw2-using-debug-str.exp with cc-with-dwz-m When running with target board cc-with-dwz-m, we run into: ... (gdb) file dw2-using-debug-str-no-debug-str^M Reading symbols from dw2-using-debug-str-no-debug-str...^M (gdb) FAIL: gdb.dwarf2/dw2-using-debug-str.exp: file dw2-using-debug-str ... With native, the .debug_str section is present in the dw2-using-debug-str executable, and removed from the dw2-using-debug-str-no-debug-str executable. When loading the latter, a dwarf error is triggered. With cc-with-dwz-m, the .debug_str section is not present in the dw2-using-debug-str executable, because it's already moved to .tmp/dw2-using-debug-str.dwz. Consequently, the removal has no effect, and no dwarf error is triggered, which causes the FAIL. The same problem arises with target board cc-with-gnu-debuglink. Fix this by detecting whether the .debug_str section is missing, and skipping the remainder of the test-case. Tested on x86_64-linux. gdb/testsuite/ChangeLog: 2021-08-02 Tom de Vries * gdb.dwarf2/dw2-using-debug-str.exp: Handle missing .debug_str section in dw2-using-debug-str. 2021-08-02 Tom de Vries [gdb/testsuite] Fix gdb.dwarf2/dw2-using-debug-str.exp with cc-with-gdb-index When running with target board cc-with-gdb-index, we run into: ... (gdb) file dw2-using-debug-str-no-debug-str^M Reading symbols from dw2-using-debug-str-no-debug-str...^M Dwarf Error: DW_FORM_strp used without required section^M (gdb) FAIL: gdb.dwarf2/dw2-using-debug-str.exp: file dw2-using-debug-str ... The test expects the dwarf error, but has no matching pattern for the entire output. Fix this by updating the regexp. Tested on x86_64-linux. gdb/testsuite/ChangeLog: 2021-08-02 Tom de Vries * gdb.dwarf2/dw2-using-debug-str.exp: Update regexp to match cc-with-gdb-index output. 2021-08-02 Tom de Vries [gdb/testsuite] Fix gdb.dwarf2/per-bfd-sharing.exp with cc-with-gdb-index When running with target board cc-with-gdb-index, we run into: ... rm: cannot remove '/tmp/tmp.JmYTeiuFjj/*.gdb-index': \ No such file or directory^M FAIL: gdb.dwarf2/per-bfd-sharing.exp: \ couldn't remove files in temporary cache dir ... Fix this, as in gdb.base/index-cache.exp, by only FAILing when $expecting_index_cache_use. Tested on x86_64-linux. gdb/testsuite/ChangeLog: 2021-08-02 Tom de Vries * gdb.dwarf2/per-bfd-sharing.exp: Only expect index-cache files when $expecting_index_cache_use. 2021-08-02 Tom de Vries [gdb/testsuite] Fix gdb.dwarf2/gdb-index-nodebug.exp with cc-with-gdb-index When running with target board cc-with-gdb-index, we run into: ... (gdb) save gdb-index .^M Error while writing index for `gdb-index-nodebug': \ Cannot use an index to create the index^M (gdb) FAIL: gdb.dwarf2/gdb-index-nodebug.exp: try to save gdb index ... Fix this by detecting an already present index, and marking the test unsupported. Tested on x86_64-linux. gdb/testsuite/ChangeLog: 2021-08-02 Tom de Vries * gdb.dwarf2/gdb-index-nodebug.exp: Mark unsupported when index already present. 2021-08-02 Tom de Vries [gdb/testsuite] Fix gdb.dwarf2/fission-relative-dwo.exp with cc-with-gdb-index When running with target board cc-with-gdb-index, we run into: ... gdb compile failed, warning: Could not find DWO CU \ fission-relative-dwo.dwo(0x1234) referenced by CU at offset 0xc7 \ [in module outputs/gdb.dwarf2/fission-relative-dwo/.tmp/fission-relative-dwo] UNTESTED: gdb.dwarf2/fission-relative-dwo.exp: fission-relative-dwo.exp ERROR: failed to compile fission-relative-dwo ... The problem is that: - the .dwo file is found relative to the executable, and - cc-with-tweaks.sh moves the executable to a temp dir, but not the .dwo file. Fix this by copying the .dwo file alongside the executable in the temp dir. Verified changes using shellcheck. Tested on x86_64-linux. gdb/ChangeLog: 2021-08-02 Tom de Vries * contrib/cc-with-tweaks.sh: Copy .dwo files alongside executable. 2021-08-02 Shahab Vahedi gdb: Make the builtin "boolean" type an unsigned type When printing the fields of a register that is of a custom struct type, the "unpack_bits_as_long ()" function is used: do_val_print (...) cp_print_value_fields (...) value_field_bitfield (...) unpack_value_bitfield (...) unpack_bits_as_long (...) This function may sign-extend the extracted field while returning it: val >>= lsbcount; if (...) { valmask = (((ULONGEST) 1) << bitsize) - 1; val &= valmask; if (!field_type->is_unsigned ()) if (val & (valmask ^ (valmask >> 1))) val |= ~valmask; } return val; lsbcount: Number of lower bits to get rid of. bitsize: The bit length of the field to be extracted. val: The register value. field_type: The type of field that is being handled. While the logic here is correct, there is a problem when it is handling "field_type"s of "boolean". Those types are NOT marked as "unsigned" and therefore they end up being sign extended. Although this is not a problem for "false" (0), it definitely causes trouble for "true". This patch constructs the builtin boolean type as such that it is marked as an "unsigned" entity. The issue tackled here was first encountered for arc-elf32 target running on an x86_64 machine. The unit-test introduced in this change has passed for all the targets (--enable-targets=all) running on the same x86_64 host. Fixes: https://sourceware.org/PR28104 2021-08-02 GDB Administrator Automatic date update in version.in 2021-08-01 Tom de Vries [gdb/testsuite] Fix gdb.base/maint.exp with cc-with-gdb-index With target board cc-with-gdb-index we run into: ... FAIL: gdb.base/maint.exp: maint print statistics ... The output that is checked is: ... Statistics for 'maint':^M Number of "minimal" symbols read: 53^M Number of "full" symbols read: 40^M Number of "types" defined: 60^M Number of symbol tables: 7^M Number of symbol tables with line tables: 2^M Number of symbol tables with blockvectors: 2^M Number of read CUs: 2^M Number of unread CUs: 5^M Total memory used for objfile obstack: 20320^M Total memory used for BFD obstack: 4064^M Total memory used for string cache: 4064^M ... and the regexp doesn't match because it expects the "Number of read/unread CUs" lines in a different place. Fix this by updating the regexp. Tested on x86_64-linux. gdb/testsuite/ChangeLog: 2021-08-01 Tom de Vries * gdb.base/maint.exp: Update "maint print statistics" to match output with target board cc-with-gdb-index. 2021-08-01 Tom de Vries [gdb/testsuite] Fix gdb.base/index-cache.exp with cc-with-gdb-index With target board cc-with-gdb-index we run into: ... FAIL: gdb.base/index-cache.exp: couldn't remove files in temporary cache dir ... The problem is that there are no files to remove, because the index cache isn't used, as indicated by $expecting_index_cache_use. Fix this by only FAILing when $expecting_index_cache_use. Tested on x86_64-linux. gdb/testsuite/ChangeLog: 2021-08-01 Tom de Vries * gdb.base/index-cache.exp: 2021-08-01 GDB Administrator Automatic date update in version.in 2021-07-31 GDB Administrator Automatic date update in version.in 2021-07-30 Tom Tromey Use iterator_range in more places This changes a couple of spots to replace custom iterator range classes with a specialization of iterator_range. Regression tested on x86-64 Fedora 34. 2021-07-30 Tom Tromey Replace exception_print_same with operator!= I noticed that exception_print_same is only used in a single spot, and it seemed to be better as an operator!= method attached to gdb_exception. Regression tested on x86-64 Fedora 34. 2021-07-30 Tom de Vries [gdb/build] Disable attribute nonnull With trunk gcc (12.0) we're running into a -Werror=nonnull-compare build breaker in gdb, which caused a broader review of the usage of the nonnull attribute. The current conclusion is that it's best to disable this. This is explained at length in the gdbsupport/common-defs.h comment. Tested by building with trunk gcc. gdb/ChangeLog: 2021-07-29 Tom de Vries * gdbsupport/common-defs.h (ATTRIBUTE_NONNULL): Disable. 2021-07-30 Clément Chigot gas: ensure XCOFF DWARF subsection are initialized to 0 debug_abbrev doesn't use end_exp to compute its size. However, it must be NULL. Otherwise, ppc_xcoff_end might try to access uninitialized memory. gas/ * config/tc-ppc.c (ppc_dwsect): Use XCNEW instead of XNEW when creating a new subsection. 2021-07-30 Clément Chigot bfd: ensure that symbols targeted by DWARF relocations are kept in XCOFF This patch improves XCOFF garbage collector pass, in order to keep symbols being referenced only by special sections like DWARF sections. bfd/ * xcofflink.c (xcoff_mark): Replace SEC_MARK by gc_mark. Look through relocations even if xcoff_section_data is NULL. (xcoff_sweep): Check if any sections of a file is kept before adding its special sections. Call xcoff_mark for special sessions being kept instead of just marking them. (SEC_MARK): Remove (xcoff_mark_symbol): Replace SEC_MARK by gc_mark. (xcoff_keep_symbol_p): Likewise. (bfd_xcoff_size_dynamic_sections): Likewise. (xcoff_find_tc0): Likewise. 2021-07-30 Clément Chigot bfd: avoid a crash when debug_section isn't created in XCOFF bfd/ * xcofflink.c (bfd_xcoff_size_dynamic_sections): Add check to know if debug_section is initialized. 2021-07-30 Alan Modra readelf: catch archive_file_size of -1 Fuzzers might put -1 in arhdr.ar_size. If the size is rounded up to and even number of bytes we get zero. * readelf.c (process_archive): Don't round up archive_file_size. Do round up next_arhdr_offset calculation. 2021-07-30 Alan Modra reloc_upper_bound size calculations Section reloc_count is an unsigned int. Adding one for a NULL terminator to an array of arelent pointers can wrap the count to zero. Avoid that by doing the addition as longs. * coffgen.c (coff_get_reloc_upper_bound): Don't overflow unsigned int expression. * elf.c (_bfd_elf_get_reloc_upper_bound): Likewise. * elf64-sparc.c (elf64_sparc_get_reloc_upper_bound): Likewise. * mach-o.c (bfd_mach_o_get_reloc_upper_bound): Likewise. * vms-alpha.c (alpha_vms_get_reloc_upper_bound): Likewise. 2021-07-30 Alan Modra Sanity check _bfd_coff_read_string_table * coffgen.c (_bfd_coff_read_string_table): Catch overflows when calculating string table file location. 2021-07-30 Alan Modra IMAGE_SCN_LNK_NRELOC_OVFL From microsoft docs: It is an error if IMAGE_SCN_LNK_NRELOC_OVFL is set and there are fewer than 0xffff relocations in the section. * coffcode.h (coff_set_alignment_hook): Sanity check overflow reloc count. 2021-07-30 Simon Marchi gdb: fix nr_bits gdb_assert in append_flags_type_field The assertion gdb_assert (nr_bits >= 1 && nr_bits <= type_bitsize); is not correct. Well, it's correct in that we do want the number of bits to be in the range [1, type_bitsize]. But we don't check anywhere that the end of the specified flag is within the containing type. The following code should generate a failed assertion, as the flag goes past the 32 bits of the underlying type, but it's currently not caught: static void test_print_flag (gdbarch *arch) { type *flags_type = arch_flags_type (arch, "test_type", 32); type *field_type = builtin_type (arch)->builtin_uint32; append_flags_type_field (flags_type, 31, 2, field_type, "invalid"); } (You can test this by registering it as a selftest using selftests::register_test_foreach_arc and running.) Change the assertion to verify that the end bit is within the range of the underlying type. This implicitly verifies that nr_bits is not too big as well, so we don't need a separate assertion for that. Change-Id: I9be79e5fd7a5917bf25b03b598727e6274c892e8 Co-Authored-By: Tony Tye 2021-07-30 GDB Administrator Automatic date update in version.in 2021-07-29 John Baldwin obsd-nat: Report both thread and PID in ::pid_to_str. This improves the output of info threads when debugging multiple inferiors (e.g. after a fork with detach_on_fork disabled). 2021-07-29 John Baldwin obsd-nat: Various fixes for fork following. - Don't use #ifdef's on ptrace ops. obsd-nat.h didn't include , so the virtual methods weren't always overridden causing the fork following to not work. In addition, the thread and fork code is intertwined in ::wait and and the lack of #ifdef's there already assumed both were present. Finally, both of these ptrace ops have been present in OpenBSD for at least 10 years. - Move duplicated code to enable PTRACE_FORK event reporting to a single function and invoke it on new child processes reported via PTRACE_FORK. - Don't return early from PTRACE_FORK handling, but instead reset wptid to the correct ptid if the child reports its event before the parent. This allows the ptid fixup code to add thread IDs if the first event for a process is a PTRACE_FORK event. This also properly returns ptid's with thread IDs when reporting PTRACE_FORK events. - Handle detach_fork by skipping the PT_DETACH. 2021-07-29 John Baldwin obsd-nat: Various fixes to obsd_nat_target::wait. - Call inf_ptrace_target::wait instead of duplicating the code. Replace a check for WIFSTOPPED on the returned status from waitpid by checking for TARGET_WAITKIND_STOPPED in the parsed status as is done in fbsd_nat_target::wait. - Don't use inferior_ptid when deciding if a new process is a child vs parent of the fork. Instead, use find_inferior_pid and assume that if an inferior already exists, the pid in question is the parent; otherwise, the pid is the child. - Don't use inferior_ptid when deciding if the ptid of the process needs to be updated with an LWP ID, or if this is a new thread. Instead, use the approach from fbsd-nat which is to check if a ptid without an LWP exists and if so update the ptid of that thread instead of adding a new thread. 2021-07-29 John Baldwin x86-bsd-nat: Only define gdb_ptrace when using debug registers. This fixes an unused function warning on OpenBSD which does not support PT_GETDBREGS. 2021-07-29 John Baldwin Don't compile x86 debug register support on OpenBSD. Simon Marchi tried gdb on OpenBSD, and it immediately segfaults when running a program. Simon tracked down the problem to x86_dr_low.get_status being nullptr at this point: (lldb) print x86_dr_low.get_status (unsigned long (*)()) $0 = 0x0000000000000000 (lldb) bt * thread #1, stop reason = step over * frame #0: 0x0000033b64b764aa gdb`x86_dr_stopped_data_address(state=0x0000033d7162a310, addr_p=0x00007f7ffffc5688) at x86-dregs.c:645:12 frame #1: 0x0000033b64b766de gdb`x86_dr_stopped_by_watchpoint(state=0x0000033d7162a310) at x86-dregs.c:687:10 frame #2: 0x0000033b64ea5f72 gdb`x86_stopped_by_watchpoint() at x86-nat.c:206:10 frame #3: 0x0000033b64637fbb gdb`x86_nat_target::stopped_by_watchpoint(this=0x0000033b65252820) at x86-nat.h:100:12 frame #4: 0x0000033b64d3ff11 gdb`target_stopped_by_watchpoint() at target.c:468:46 frame #5: 0x0000033b6469b001 gdb`watchpoints_triggered(ws=0x00007f7ffffc61c8) at breakpoint.c:4790:32 frame #6: 0x0000033b64a8bb8b gdb`handle_signal_stop(ecs=0x00007f7ffffc61a0) at infrun.c:6072:29 frame #7: 0x0000033b64a7e3a7 gdb`handle_inferior_event(ecs=0x00007f7ffffc61a0) at infrun.c:5694:7 frame #8: 0x0000033b64a7c1a0 gdb`fetch_inferior_event() at infrun.c:4090:5 frame #9: 0x0000033b64a51921 gdb`inferior_event_handler(event_type=INF_REG_EVENT) at inf-loop.c:41:7 frame #10: 0x0000033b64a827c9 gdb`infrun_async_inferior_event_handler(data=0x0000000000000000) at infrun.c:9384:3 frame #11: 0x0000033b6465bd4f gdb`check_async_event_handlers() at async-event.c:335:4 frame #12: 0x0000033b65070917 gdb`gdb_do_one_event() at event-loop.cc:216:10 frame #13: 0x0000033b64af0db1 gdb`start_event_loop() at main.c:421:13 frame #14: 0x0000033b64aefe9a gdb`captured_command_loop() at main.c:481:3 frame #15: 0x0000033b64aed5c2 gdb`captured_main(data=0x00007f7ffffc6470) at main.c:1353:4 frame #16: 0x0000033b64aed4f2 gdb`gdb_main(args=0x00007f7ffffc6470) at main.c:1368:7 frame #17: 0x0000033b6459d787 gdb`main(argc=5, argv=0x00007f7ffffc6518) at gdb.c:32:10 frame #18: 0x0000033b6459d521 gdb`___start + 321 On BSDs, get_status is set in _initialize_x86_bsd_nat, but only if HAVE_PT_GETDBREGS is defined. PT_GETDBREGS doesn't exist on OpenBSD, so get_status (and the other fields of x86_dr_low) are left as nullptr. OpenBSD doesn't support getting or setting the x86 debug registers, so fix by omitting debug register support entirely on OpenBSD: - Change x86bsd_nat_target to only inherit from x86_nat_target if PT_GETDBREGS is supported. - Don't include x86-nat.o and nat/x86-dregs.o for OpenBSD/amd64. They were already omitted for OpenBSD/i386. 2021-07-29 Carl Love Fix for gdb.tui/tui-layout-asm.exp The width of the window is too narrow to display the entire assembly line. The width of the columns in the window changes as the test walks thru the terminal window output. The column change results in the first and second reads of the same line to differ thus causing the test to fail. Increasing the width of the window keeps the column width consistent thru the test. If the test fails, the added check prints an message to the log file if the failure may be due to the window being too narrow. gdb/testsuite/ChangeLog * gdb.tui/tui-layout-asm.exp: Replace window width of 80 with the tui_asm_window_width variable for the width. Add if count_whitespace check. (count_whitespace): New proc 2021-07-29 George Barrett guile/scm-math: indentation fixes Changes the indenting of a few expressions in vlscm_convert_typed_number to be better in line with the prevailing code style. gdb/ChangeLog: 2021-07-30 George Barrett * guile/scm-math.c (vlscm_convert_typed_number): Fix the indentation of calls to gdbscm_make_out_of_range_error. Change-Id: I7463998b77c17a00e88058e89b52fa029ee40e03 2021-07-29 George Barrett guile: fix make-value with pointer type Calling the `make-value' procedure with an integer value and a pointer type for the #:type argument triggers a failed assertion in `get_unsigned_type_max', as that function doesn't consider pointers to be an unsigned type. This commit fixes the issue by adding a separate code path for pointers. As previously suggested, range checking is done using a new helper function in gdbtypes. gdb/ChangeLog: 2021-07-30 George Barrett * gdbtypes.h (get_pointer_type_max): Add declaration. * gdbtypes.c (get_pointer_type_max): Add definition for new helper function. * guile/scm-math.c (vlscm_convert_typed_number): Add code path for handling conversions to pointer types without failing an assert. gdb/testsuite/ChangeLog: 2021-07-30 George Barrett * gdb.guile/scm-math.exp (test_value_numeric_ops): Add test for creating pointers with make-value. (test_make_pointer_value, test_pointer_numeric_range): Add test procedures containing checks for integer-to-pointer validation. Change-Id: I9994dd1c848840a3d995f745e6d72867732049f0 2021-07-29 George Barrett gdbtypes: return value from get_unsigned_type_max Changes the signature of get_unsigned_type_max to return the computed value rather than returning void and writing the value into a pointer passed by the caller. gdb/ChangeLog: 2021-07-30 George Barrett * gdbtypes.h (get_unsigned_type_max): Change signature to return the result instead of accepting a pointer argument in which to store the result. * gdbtypes.c (get_unsigned_type_max): Likewise. * guile/scm-math.c (vlscm_convert_typed_number): Update caller of get_unsigned_type_max. (vlscm_integer_fits_p): Likewise. Change-Id: Ibb1bf0c0fa181fac7853147dfde082a7d1ae2323 2021-07-29 Clément Chigot gas: improve C_BSTAT and C_STSYM symbols handling on XCOFF A C_BSTAT debug symbol specifies the beginning of a static block. Its n_value is the index of the csect containing static symbols. A C_STSYM debug symbol represents the stabstring of a statically allocated symbol. Its n_value is the offset in the csect pointed by the containing C_BSTAT. These two special n_value were not correctly handled both when generating object files with gas or when reading them with objdump. This patch tries to improve that and, above all, to allow gas-generated object files with such symbols to be accepted by AIX ld. bfd/ * coff-bfd.c (bfd_coff_get_syment): Adjust n_value of symbols having fix_value = 1 in order to be an index and not a memory offset. * coffgen.c (coff_get_symbol_info): Likewize. (coff_print_symbol): Likewize. gas/ * config/tc-ppc.c (ppc_frob_label): Don't change within if already set. (ppc_stabx): Remove workaround changing exp.X_add_symbol's within. * config/tc-ppc.h (struct ppc_tc_sy): Update comments. * symbols.c (resolve_symbol_value): Remove symbol update when final_val is 0 and it's an AIX debug symbol. * testsuite/gas/ppc/aix.exp: Add new tests. * testsuite/gas/ppc/xcoff-stsym-32.d: New test. * testsuite/gas/ppc/xcoff-stsym-64.d: New test. * testsuite/gas/ppc/xcoff-stsym.s: New test. 2021-07-29 George Barrett Guile: temporary breakpoints Adds API to the Guile bindings for creating temporary breakpoints and querying whether an existing breakpoint object is temporary. This is effectively a transliteration of the Python implementation. It's worth noting that the added `is_temporary' flag is ignored in the watchpoint registration path. This replicates the behaviour of the Python implementation, but might be a bit surprising for users. gdb/ChangeLog: 2021-06-09 George Barrett * guile/scm-breakpoint.c (gdbscm_breakpoint_object::spec): Add is_temporary field. (temporary_keyword): Add keyword object for make-breakpoint argument parsing. (gdbscm_make_breakpoint): Accept #:temporary keyword argument and store the value in the allocated object's spec.is_temporary. (gdbscm_register_breakpoint_x): Pass the breakpoint's spec.is_temporary value to create_breakpoint. (gdbscm_breakpoint_temporary): Add breakpoint-temporary? procedure implementation. (breakpoint_functions::make-breakpoint): Update documentation string and fix a typo. (breakpoint_functions::breakpoint-temporary?): Add breakpoint-temporary? procedure. (gdbscm_initialize_breakpoints): Initialise temporary_keyword variable. NEWS (Guile API): Mention new temporary breakpoints API. gdb/doc/ChangeLog: 2021-06-09 George Barrett * guile.texi (Breakpoints In Guile): Update make-breakpoint documentation to reflect new #:temporary argument. Add documentation for new breakpoint-temporary? procedure. gdb/testsuite/ChangeLog: 2021-06-09 George Barrett * gdb.guile/scm-breakpoint.exp: Add additional tests for temporary breakpoints. Change-Id: I2de332ee7c256f5591d7141ab3ad50d31b871d17 2021-07-29 GDB Administrator Automatic date update in version.in 2021-07-28 Simon Marchi gdb: clean up some things in features/Makefile Clean up some things I noticed: - we generate a regformats/microblaze-with-stack-protect.dat file. I don't think this is used. It could be used by a GDBserver built for Microblaze, but GDBserver isn't ported to Microblaze. So I don't think that's used at all. Remove the entry in features/Makefile and the file itself. - There are a bunch of *-expedite values in features/Makefile for architectures for which we don't generate dat files. AFAIK, these *-expedite values are only used when generating dat files. Remove those that are not necessary. - 32bit-segments.xml is not listed in the Makfile, but it's used. This means that it wouldn't get re-generated if we were to change how C files are generated from the XML. It looks like it was simply forgotten, add it. Change-Id: I112d00db317102270e1df924473c37122ccb6c3a 2021-07-28 H.J. Lu x86: Simplify check for distinct TMM register operands If any pair of operands in AMX instructions with 3 TMM register operands are the same, the instruction will UD. Don't call register_number to check for distinct TMM register operands since all TMM register operands have the same size. * config/tc-i386.c (check_VecOperands): Remove register_number call when checking for distinct TMM register operands. 2021-07-28 H.J. Lu ld: Run tmpdir/pr28138 only for native build * PR ld/28138 * testsuite/ld-plugin/lto.exp: Run tmpdir/pr28138 only for native build. 2021-07-28 H.J. Lu bfd: Close the file descriptor if there is no archive fd Close the file descriptor if there is no archive plugin file descriptor to avoid running out of file descriptors on thin archives with many archive members. bfd/ PR ld/28138 * plugin.c (bfd_plugin_close_file_descriptor): Close the file descriptor there is no archive plugin file descriptor. ld/ PR ld/28138 * testsuite/ld-plugin/lto.exp: Run ld/28138 tests. * testsuite/ld-plugin/pr28138.c: New file. * testsuite/ld-plugin/pr28138-1.c: Likewise. * testsuite/ld-plugin/pr28138-2.c: Likewise. * testsuite/ld-plugin/pr28138-3.c: Likewise. * testsuite/ld-plugin/pr28138-4.c: Likewise. * testsuite/ld-plugin/pr28138-5.c: Likewise. * testsuite/ld-plugin/pr28138-6.c: Likewise. * testsuite/ld-plugin/pr28138-7.c: Likewise. 2021-07-28 H.J. Lu ld: Report error reason when a library cannot be found With "ulimit -n 20", report: ld: cannot find -lgcc: Too many open files instead of ld: cannot find -lgcc * ldfile.c (ldfile_open_file): Rport error reason when a library cannot be found. 2021-07-28 Sergei Trofimovich texi2pod.pl: add no-op --no-split option support [PR28144] Change 2faf902da ("generate single html manual page by default") added use of --no-split option to makeinfo. binutils reuses makeinfo options for texi2pod.pl wrapper. Unsupported option led to silent manpage truncation. The change adds no-op option support. etc/ * texi2pod.pl: Handle no-op --no-split option. 2021-07-28 Andrew Burgess gdb: fix missing space in some info variables output Fixes PR gdb/28121. When a user declares an array like this: int * const foo_1[3]; And in GDB the user does this: (gdb) info variables foo All variables matching regular expression "foo": File test.c: 1: int * constfoo_1[3]; Notice the missing space between 'const' and 'foo_1'. This is fixed in c_type_print_varspec_prefix (c-typeprint.c) by passing through the flag that indicates if a trailing space is needed, rather than hard coding the flag to false as we currently do. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28121 2021-07-28 Tom de Vries [gdb/symtab] Fix unhandled dwarf expression opcode with gcc-11 -gdwarf-5 [ I've confused things by forgetting to add -gdwarf-4 in $subject of commit 0057a7ee0d9 "[gdb/testsuite] Add KFAILs for gdb.ada FAILs with gcc-11". So I'm adding here -gdwarf-5 in $subject, even though -gdwarf-5 is the default for gcc-11. I keep getting confused because of working with a system gcc-11 compiler that was patched to switch the default back to -gdwarf-4. ] When running test-case gdb.ada/arrayptr.exp with gcc-11 (and default -gdwarf-5), I run into: ... (gdb) print pa_ptr.all^M Unhandled dwarf expression opcode 0xff^M (gdb) FAIL: gdb.ada/arrayptr.exp: scenario=all: print pa_ptr.all ... What happens is that pa_ptr: ... <2><1523>: Abbrev Number: 3 (DW_TAG_variable) <1524> DW_AT_name : pa_ptr <1529> DW_AT_type : <0x14fa> ... has type: ... <2><14fa>: Abbrev Number: 2 (DW_TAG_typedef) <14fb> DW_AT_name : foo__packed_array_ptr <1500> DW_AT_type : <0x1504> <2><1504>: Abbrev Number: 4 (DW_TAG_pointer_type) <1505> DW_AT_byte_size : 8 <1505> DW_AT_type : <0x1509> ... which is a pointer to a subrange: ... <2><1509>: Abbrev Number: 12 (DW_TAG_subrange_type) <150a> DW_AT_lower_bound : 0 <150b> DW_AT_upper_bound : 0x3fffffffffffffffff <151b> DW_AT_name : foo__packed_array <151f> DW_AT_type : <0x15cc> <1523> DW_AT_artificial : 1 <1><15cc>: Abbrev Number: 5 (DW_TAG_base_type) <15cd> DW_AT_byte_size : 16 <15ce> DW_AT_encoding : 7 (unsigned) <15cf> DW_AT_name : long_long_long_unsigned <15d3> DW_AT_artificial : 1 ... with upper bound of form DW_FORM_data16. In gdb/dwarf/attribute.h we have: ... /* Return non-zero if ATTR's value falls in the 'constant' class, or zero otherwise. When this function returns true, you can apply the constant_value method to it. ... DW_FORM_data16 is not considered as constant_value cannot handle that. */ bool form_is_constant () const; ... so instead we have attribute::form_is_block (DW_FORM_data16) == true. Then in attr_to_dynamic_prop for the upper bound, we get a PROC_LOCEXPR instead of a PROP_CONST and end up trying to evaluate the constant 0x3fffffffffffffffff as if it were a locexpr, which causes the "Unhandled dwarf expression opcode 0xff". In contrast, with -gdwarf-4 we have: ... <164c> DW_AT_upper_bound : 18 byte block: \ 9e 10 ff ff ff ff ff ff ff ff 3f 0 0 0 0 0 0 0 \ (DW_OP_implicit_value 16 byte block: \ ff ff ff ff ff ff ff ff 3f 0 0 0 0 0 0 0 ) ... Fix the dwarf error by translating the DW_FORM_data16 constant into a PROC_LOCEXPR, effectively by prepending 0x9e 0x10, such that we have same result as with -gdwarf-4: ... (gdb) print pa_ptr.all^M That operation is not available on integers of more than 8 bytes.^M (gdb) KFAIL: gdb.ada/arrayptr.exp: scenario=all: print pa_ptr.all \ (PRMS: gdb/20991) ... Tested on x86_64-linux, with gcc-11 and target board unix/gdb:debug_flags=-gdwarf-5. gdb/ChangeLog: 2021-07-25 Tom de Vries * dwarf2/read.c (attr_to_dynamic_prop): Handle DW_FORM_data16. 2021-07-28 will schmidt Externalize the _bfd_set_gp_value function This change adds an external-visible wrapper for the _bfd_set_gp_value function. This is a prerequisite for some gdb patches that better handle powerpc64le relocations against ".TOC.". * bfd.c (bfd_set_gp_value): New externally visible wrapper for _bfd_set_gp_value. * bfd-in2.h: Regenerate. 2021-07-28 Alan Modra PowerPC: ignore sticky options for .machine PowerPC gas and objdump for a long time have allowed certain -m/-M options that extend a base cpu with extra functional units to be specified before the base cpu. For example, "-maltivec -mpower4" is the same as "-mpower4 -maltivec". See https://sourceware.org/pipermail/binutils/2008-January/054935.html It doesn't make as much sense that .machine keep any of these "sticky" flags when handling a new base cpu. See gcc PR101393. I think that instead .machine ought to override the command line. That's what this patch does. It is still possible to extend cpu functionality with .machine. For example the following can be assembled when selecting a basic -mppc on the command line: .machine power5 .machine altivec frin 1,2 lvsr 3,4,5 Here, ".machine altivec" extends the ".machine power5" so that both the power5 "frin" instruction and the altivec "lvsr" instruction are enabled. Swapping the two ".machine" directives would result in failure to assemble "lvsr". This change will expose some assembly errors, such as the one in glibc/sysdeps/powerpc/powerpc64/tst-ucontext-ppc64-vscr.c, a file compiled with -maltivec but containing asm volatile (".machine push;\n" ".machine \"power5\";\n" "vspltisb %0,0;\n" "vspltisb %1,-1;\n" "vpkuwus %0,%0,%1;\n" "mfvscr %0;\n" "stvx %0,0,%2;\n" ".machine pop;" : "=v" (v0), "=v" (v1) : "r" (vscr_ptr) : "memory"); It's just wrong to choose power5 for a bunch of altivec instructions and in fact all of those .machine directives are unnecessary. * config/tc-ppc.c (ppc_machine): Don't use command line sticky options. 2021-07-28 GDB Administrator Automatic date update in version.in 2021-07-27 Tom de Vries [gdb/testsuite] Add xfail for PR gcc/101643 With gcc 8.5.0 I run into: ... (gdb) print bad^M $2 = (0 => 0 )^M (gdb) FAIL: gdb.ada/big_packed_array.exp: scenario=minimal: print bad ... while with gcc 9.3.1 we have instead: ... (gdb) print bad^M $2 = (false )^M (gdb) PASS: gdb.ada/big_packed_array.exp: scenario=minimal: print bad ... This is caused by gcc PR, which I've filed at https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101643 "[debug, ada] packed array not described as packed". Fix by marking this as XFAIL. Tested on x86_64-linux. gdb/ChangeLog: 2021-07-27 Tom de Vries PR testsuite/26904 * gdb/testsuite/gdb.ada/big_packed_array.exp: Add xfail. 2021-07-27 Tom de Vries [gdb/testsuite] Add xfail for PR gcc/101633 With gcc 7.5.0, I run into: ... (gdb) print objects^M $1 = ((tag => object, values => ()), (tag => unused))^M (gdb) FAIL: gdb.ada/array_of_variant.exp: scenario=minimal: print entire array ... while with gcc 8.5.0 we have: ... (gdb) print objects^M $1 = ((tag => object, values => (2, 2, 2, 2, 2)), (tag => unused))^M (gdb) PASS: gdb.ada/array_of_variant.exp: scenario=minimal: print entire array ... This is due to a gcc PR, which I've filed at https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101633 "Bug 101633 - [debug] DW_TAG_subrange_type missing DW_AT_upper_bound". Fix by marking this and related FAILs as XFAIL. Tested on x86_64-linux. gdb/ChangeLog: 2021-07-27 Tom de Vries PR testsuite/26903 * gdb/testsuite/gdb.ada/array_of_variant.exp: Add xfails. 2021-07-27 Andrew Burgess gdb: remove VALUE_FRAME_ID and fix another frame debug issue This commit was originally part of this patch series: (v1): https://sourceware.org/pipermail/gdb-patches/2021-May/179357.html (v2): https://sourceware.org/pipermail/gdb-patches/2021-June/180208.html (v3): https://sourceware.org/pipermail/gdb-patches/2021-July/181028.html However, that series is being held up in review, so I wanted to break out some of the non-related fixes in order to get these merged. This commit addresses two semi-related issues, both of which are problems exposed by using 'set debug frame on'. The first issue is in frame.c in get_prev_frame_always_1, and was introduced by this commit: commit a05a883fbaba69d0f80806e46a9457727fcbe74c Date: Tue Jun 29 12:03:50 2021 -0400 gdb: introduce frame_debug_printf This commit replaced fprint_frame with frame_info::to_string. However, the former could handle taking a nullptr while the later, a member function, obviously requires a non-nullptr in order to make the function call. In one place we are not-guaranteed to have a non-nullptr, and so, there is the possibility of triggering undefined behaviour. The second issue addressed in this commit has existed for a while in GDB, and would cause this assertion: gdb/frame.c:622: internal-error: frame_id get_frame_id(frame_info*): Assertion `fi->this_id.p != frame_id_status::COMPUTING' failed. We attempt to get the frame_id for a frame while we are computing the frame_id for that same frame. What happens is that when GDB stops we create a frame_info object for the sentinel frame (frame #-1) and then we attempt to unwind this frame to create a frame_info object for frame #0. In the test case used here to expose the issue we have created a Python frame unwinder. In the Python unwinder we attemt to read the program counter register. Reading this register will initially create a lazy register value. The frame-id stored in the lazy register value will be for the sentinel frame (lazy register values hold the frame-id for the frame from which the register will be unwound). However, the Python unwinder does actually want to examine the value of the program counter, and so the lazy register value is resolved into a non-lazy value. This sends GDB into value_fetch_lazy_register in value.c. Now, inside this function, if 'set debug frame on' is in effect, then we want to print something like: frame=%d, regnum=%d(%s), .... Where 'frame=%d' will be the relative frame level of the frame for which the register is being fetched, so, in this case we would expect to see 'frame=0', i.e. we are reading a register as it would be in frame #0. But, remember, the lazy register value actually holds the frame-id for frame #-1 (the sentinel frame). So, to get the frame_info for frame #0 we used to call: frame = frame_find_by_id (VALUE_FRAME_ID (val)); Where VALUE_FRAME_ID is: #define VALUE_FRAME_ID(val) (get_prev_frame_id_by_id (VALUE_NEXT_FRAME_ID (val))) That is, we start with the frame-id for the next frame as obtained by VALUE_NEXT_FRAME_ID, then call get_prev_frame_id_by_id to get the frame-id of the previous frame. The get_prev_frame_id_by_id function finds the frame_info for the given frame-id (in this case frame #-1), calls get_prev_frame to get the previous frame, and then calls get_frame_id. The problem here is that calling get_frame_id requires that we know the frame unwinder, so then have to try each frame unwinder in turn, which would include the Python unwinder.... which is where we started, and thus we have a loop! To prevent this loop GDB has an assertion in place, which is what actually triggers. Solving the assertion failure is pretty easy, if we consider the code in value_fetch_lazy_register and get_prev_frame_id_by_id then what we do is: 1. Start with a frame_id taken from a value, 2. Lookup the corresponding frame, 3. Find the previous frame, 4. Get the frame_id for that frame, and 5. Lookup the corresponding frame 6. Print the frame's level Notice that steps 3 and 5 give us the exact same result, step 4 is just wasted effort. We could shorten this process such that we drop steps 4 and 5, thus: 1. Start with a frame_id taken from a value, 2. Lookup the corresponding frame, 3. Find the previous frame, 6. Print the frame's level This will give the exact same frame as a result, and this is what I have done in this patch by removing the use of VALUE_FRAME_ID from value_fetch_lazy_register. Out of curiosity I looked to see how widely VALUE_FRAME_ID was used, and saw it was only used in one other place in valops.c:value_assign, where, once again, we take the result of VALUE_FRAME_ID and pass it to frame_find_by_id, thus introducing a redundant frame_id lookup. I don't think the value_assign case risks triggering the assertion though, as we are unlikely to call value_assign while computing the frame_id for a frame, however, we could make value_assign slightly more efficient, with no real additional complexity, by removing the use of VALUE_FRAME_ID. So, in this commit, I completely remove VALUE_FRAME_ID, and replace it with a use of VALUE_NEXT_FRAME_ID, followed by a direct call to get_prev_frame_always, this should make no difference in either case, and resolves the assertion issue from value.c. As I said, this patch was originally part of another series, the original test relied on the fixes in that original series. However, I was able to create an alternative test for this issue by enabling frame debug within an existing test script. This commit probably fixes bug PR gdb/27938, though the bug doesn't have a reproducer attached so it is not possible to know for sure. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27938 2021-07-27 Chenghua Xu Correct gs264e bfd_mach in mips_arch_choices. opcodes/ * mips-dis.c (mips_arch_choices): Correct gs264e bfd_mach. 2021-07-27 Roland McGrath Fix ld test case that assumes --enable-textrel-check ld/ * testsuite/ld-x86-64/x86-64.exp (Build textrel-1): Use --warn-textrel. 2021-07-27 GDB Administrator Automatic date update in version.in 2021-07-27 H.J. Lu bfd: Set error to bfd_error_malformed_archive only if unset When reading an archive member, set error to bfd_error_malformed_archive on open_nested_file failure only if the error is unset. PR ld/28138 * archive.c (_bfd_get_elt_at_filepos): Don't set error to bfd_error_malformed_archive if it has been set. 2021-07-26 Carl Love Fix for mi-reverse.exp This test fails on PPC64 because PPC64 prints the value of 3.5 with more significant digits than on Intel. The patch updates the regular expression to allow for more significant digits on the constant. gdb/testsuite/ChangeLog * gdb.mi/mi-reverse.exp: mi_execute_to exec-step reverse add check for additional digits. 2021-07-26 Tom Tromey Fix the Windows build The gdb build was broken on Windows after the patch to change get_inferior_cwd. This patch fixes the build. 2021-07-26 Shahab Vahedi gdb: Fix numerical field extraction for target description "flags" The "val_print_type_code_flags ()" function is responsible for extraction of fields for "flags" data type. These data types are used when describing a custom register type in a target description XML. The logic used for the extraction though is not sound: unsigned field_len = TYPE_FIELD_BITSIZE (type, field); ULONGEST field_val = val >> (TYPE_FIELD_BITPOS (type, field) - field_len + 1); TYPE_FIELD_BITSIZE: The bit length of the field to be extracted. TYPE_FIELD_BITPOS: The starting position of the field; 0 is LSB. val: The register value. Imagine you have a field that starts at position 1 and its length is 4 bits. According to the third line of the code snippet the shifting right would become "val >> -2", or "val >> 0xfff...fe" to be precise. That will result in a "field_val" of 0. The correct extraction should be: ULONGEST field_val = val >> TYPE_FIELD_BITPOS (type, field); The rest of the algorithm that masks out the higher bits is OK. Co-Authored-By: Simon Marchi 2021-07-26 Andrea Corallo PATCH [10/10] arm: Alias 'ra_auth_code' to r12 for pacbti. gas/ 2021-06-11 Andrea Corallo * config/tc-arm.c (reg_names): Alias 'ra_auth_code' to r12. 2021-07-26 Andrea Corallo PATCH [9/10] arm: add 'pacg' instruction for Armv8.1-M pacbti extension gas/ 2021-06-11 Andrea Corallo * config/tc-arm.c (T16_32_TAB): Add '_pacg'. (do_t_pacbti_pacg): New function. (insns): Define 'pacg' insn. * testsuite/gas/arm/armv8_1-m-pacbti.d: Add 'pacg' test. * testsuite/gas/arm/armv8_1-m-pacbti.s: Likewise. opcodes/ 2021-06-11 Andrea Corallo * arm-dis.c (thumb32_opcodes): Add 'pacg'. 2021-07-26 Andrea Corallo PATCH [8/10] arm: add 'autg' instruction for Armv8.1-M pacbti extension gas/ 2021-06-11 Andrea Corallo * config/tc-arm.c (T16_32_TAB): Add '_autg'. (insns): Define 'autg' insn. * testsuite/gas/arm/armv8_1-m-pacbti.d: Add autg test. * testsuite/gas/arm/armv8_1-m-pacbti.s: Likewise. opcodes/ 2021-06-11 Andrea Corallo * arm-dis.c (thumb32_opcodes): Add 'autg'. 2021-07-26 Andrea Corallo PATCH [7/10] arm: add 'bxaut' instruction for Armv8.1-M pacbti extension gas/ 2021-06-11 Andrea Corallo * config/tc-arm.c (T16_32_TAB): Add '_bxaut'. (do_t_pacbti_nonop): New function. (insns): Define 'bxaut' insn. * testsuite/gas/arm/armv8_1-m-pacbti.d: Add 'bxaut' test. * testsuite/gas/arm/armv8_1-m-pacbti.s: Likewise. opcodes/ 2021-06-11 Andrea Corallo * arm-dis.c (thumb32_opcodes): Add 'bxaut'. 2021-07-26 Andrea Corallo PATCH [6/10] arm: Add -march=armv8.1-m.main+pacbti flag gas/ 2021-06-11 Andrea Corallo * config/tc-arm.c (pacbti_ext): Define. (BAD_PACBTI): New macro. (armv8_1m_main_ext_table): Add 'pacbti' extension. include/ 2021-06-11 Andrea Corallo * opcode/arm.h (ARM_EXT3_PACBTI, ARM_AEXT3_V8_1M_MAIN_PACBTI): New macro. 2021-07-26 Andrea Corallo PATCH [5/10] arm: Extend again arm_feature_set struct to provide more bits include/ 2021-06-11 Andrea Corallo * opcode/arm.h (arm_feature_set): Extend 'core' field. (ARM_CPU_HAS_FEATURE, ARM_FSET_CPU_SUBSET, ARM_CPU_IS_ANY) (ARM_MERGE_FEATURE_SETS, ARM_CLEAR_FEATURE, ARM_FEATURE_EQUAL) (ARM_FEATURE_ZERO, ARM_FEATURE_CORE_EQUAL): Account for 'core[2]'. (ARM_FEATURE_CORE_HIGH_HIGH): New macro. 2021-07-26 Andrea Corallo PATCH [4/10] arm: add 'pac' instruction for Armv8.1-M pacbti extension gas/ 2021-06-11 Andrea Corallo * config/tc-arm.c (T16_32_TAB): Add '_pac'. (insns): Add 'pac' insn. * testsuite/gas/arm/armv8_1-m-pacbti-bad.l: Add pac tests. * testsuite/gas/arm/armv8_1-m-pacbti-bad.s: Likewise. * testsuite/gas/arm/armv8_1-m-pacbti.d: Likewise. * testsuite/gas/arm/armv8_1-m-pacbti.s: Likewise. opcodes/ 2021-06-11 Andrea Corallo * arm-dis.c (thumb32_opcodes): Add 'pac'. 2021-07-26 Andrea Corallo PATCH [3/10] arm: add 'aut' instruction for Armv8.1-M pacbti extension gas/ 2021-06-11 Andrea Corallo * config/tc-arm.c (insns): Add 'aut.' (T16_32_TAB): Add '_aut'. * testsuite/gas/arm/armv8_1-m-pacbti-bad.l: Add 'aut' tests. * testsuite/gas/arm/armv8_1-m-pacbti-bad.s: Likewise. * testsuite/gas/arm/armv8_1-m-pacbti.d: Likewise. * testsuite/gas/arm/armv8_1-m-pacbti.s: Likewise. opcodes/ 2021-06-11 Andrea Corallo * arm-dis.c (thumb32_opcodes): Add 'aut'. 2021-07-26 Andrea Corallo PATCH [2/10] arm: add 'pacbti' instruction for Armv8.1-M pacbti extension gas/ 2021-06-11 Andrea Corallo * config/tc-arm.c (enum operand_parse_code): Add OP_SP and OP_R12. (parse_operands): Add switch cases for OP_SP and OP_R12. (T16_32_TAB): Add '_pacbti'. (do_t_pacbti): New function. (insns): Add 'pacbti'. * testsuite/gas/arm/armv8_1-m-pacbti-bad.d: New file. * testsuite/gas/arm/armv8_1-m-pacbti-bad.l: Likewise. * testsuite/gas/arm/armv8_1-m-pacbti-bad.s: Likewise. * testsuite/gas/arm/armv8_1-m-pacbti.d: Add 'pacbti' to testcase. * testsuite/gas/arm/armv8_1-m-pacbti.s: Likewise. opcodes/ 2021-06-11 Andrea Corallo * arm-dis.c (thumb32_opcodes): Add 'pacbti' instruction. 2021-07-26 Andrea Corallo PATCH [1/10] arm: add 'bti' instruction for Armv8.1-M pacbti extension gas/ 2021-06-11 Andrea Corallo * config/tc-arm.c (insns): Add 'bti' insn. * testsuite/gas/arm/armv8_1-m-pacbti.d: New file. * testsuite/gas/arm/armv8_1-m-pacbti.s: Likewise. opcodes/ 2021-06-11 Andrea Corallo * arm-dis.c (thumb32_opcodes): Add bti instruction. 2021-07-26 Andrew Burgess gdb: move remaining ChangeLogs to legacy files In commit: commit f069ea46a03ae868581d1c852da28e979ea1245a Date: Sat Jul 3 16:29:08 2021 -0700 Rename gdb/ChangeLog to gdb/ChangeLog-2021 The gdb/ChangeLog file was renamed, but all of the other ChangeLog files relating to gdb were left in place. As I understand things, the no ChangeLogs policy applies to all the GDB related directories, so this commit renames all of the remaining GDB related ChangeLog files. As with the original commit, the intention behind this commit is to hopefully stop people merging ChangeLog entries by mistake. The renames carried out in this commit are: gdb/doc/ChangeLog -> gdb/doc/ChangeLog-1991-2021 gdb/stubs/ChangeLog -> gdb/stubs/ChangeLog-2012-2020 gdb/testsuite/ChangeLog -> gdb/testsuite/ChangeLog-2014-2021 gdbserver/ChangeLog -> gdbserver/ChangeLog-2002-2021 gdbsupport/ChangeLog -> gdbsupport/ChangeLog-2020-2021 2021-07-26 Tankut Baris Aktemur gdb/mi: handle no condition argument case for -break-condition As reported in PR gdb/28076 [1], passing no condition argument to the -break-condition command (e.g.: "-break-condition 2") should clear the condition for breakpoint 2, just like CLI's "condition 2", but instead an error message is returned: ^error,msg="-break-condition: Missing the and/or argument" The current implementation of the -break-condition command's argument handling (79aabb7308c "gdb/mi: add a '--force' flag to the '-break-condition' command") was done according to the documentation, where the condition argument seemed mandatory. However, the -break-condition command originally (i.e. before the 79aabb7308c patch) used the CLI's "cond" command, and back then not passing a condition argument was clearing out the condition. So, this is a regression in terms of the behavior. Fix the argument handling of the -break-condition command to allow not having a condition argument, and also update the document to make the behavior clear. Also add test cases to test the scenarios which were previously not covered. [1] https://sourceware.org/bugzilla/show_bug.cgi?id=28076 2021-07-26 GDB Administrator Automatic date update in version.in 2021-07-25 GDB Administrator Automatic date update in version.in 2021-07-24 Alan Modra Revert: PowerPC: Don't generate unused section symbols Blindly following x86 broke linux kernel builds. bfd/ * elf32-ppc.c (TARGET_KEEP_UNUSED_SECTION_SYMBOLS): Define as true. * elf64-ppc.c (TARGET_KEEP_UNUSED_SECTION_SYMBOLS): Likewise. gas/ * testsuite/gas/ppc/power4.d: Adjust for section sym change. * testsuite/gas/ppc/test1elf32.d: Likewise. * testsuite/gas/ppc/test1elf64.d: Likewise. ld/ * testsuite/ld-powerpc/tlsexe.r: Adjust for section sym change. * testsuite/ld-powerpc/tlsexe32.r: Likewise. * testsuite/ld-powerpc/tlsexe32no.r: Likewise. * testsuite/ld-powerpc/tlsexeno.r: Likewise. * testsuite/ld-powerpc/tlsexenors.r: Likewise. * testsuite/ld-powerpc/tlsexers.r: Likewise. * testsuite/ld-powerpc/tlsexetoc.r: Likewise. * testsuite/ld-powerpc/tlsexetocrs.r: Likewise. * testsuite/ld-powerpc/tlsget.d: Likewise. * testsuite/ld-powerpc/tlsget.wf: Likewise. * testsuite/ld-powerpc/tlsget2.d: Likewise. * testsuite/ld-powerpc/tlsget2.wf: Likewise. * testsuite/ld-powerpc/tlsso.r: Likewise. * testsuite/ld-powerpc/tlsso32.r: Likewise. * testsuite/ld-powerpc/tlstocso.r: Likewise. 2021-07-24 Alan Modra Re: ld script expression parsing Commit 40726f16a8d7 broke references to sections within ADDR(), and overlays with weird section names. * ldgram.y (paren_script_name): New rule. (exp): Use it for ALIGNOF, SIZEOF, ADDR, and LOADADDR. Similarly ensure script mode parsing for section name in SEGMENT_START. (overlay_section): Delete unnecessary ldlex_script call. Backup on a lookahead NAME parsed in expression mode. * testsuite/ld-elf/overlay.s: Add more sections. * testsuite/ld-elf/overlay.t: Test '-' in section names. 2021-07-24 Frederic Cambus Update the NetBSD system call table to match NetBSD-current. Generated from sys/sys/syscall.h revision 1.319. We can safely remove the _lwp_gettid syscall, which was never exposed in libc and never made it into a release. gdb/ChangeLog: 2021-07-23 Frederic Cambus * syscalls/netbsd.xml: Regenerate. 2021-07-24 GDB Administrator Automatic date update in version.in 2021-07-23 Simon Marchi gdb/testsuite: test get/set value of unregistered Guile parameter When creating a parameter in Guile, you have to create it using make-parameter and then register it with GDB with register-parameter!. In between, it's still possible (though not documented) to set the parameter's value. I broke this use case by mistake while writing this series, so thought it would be good to have a test for it. I suppose that people could use this "feature" to give their parameter an initial value, even though make-parameter has an initial-value parameter for this. Nevertheless, changing this behavior could break some scripts, which is why I think it's important for it to be tested. Change-Id: I5b2103e3cec0cfdcccf7ffb00eb05fed8626e66d 2021-07-23 Simon Marchi gdb: remove cmd_list_element::function::sfunc I don't understand what the sfunc function type in cmd_list_element::function is for. Compared to cmd_simple_func_ftype, it has an extra cmd_list_element parameter, giving the callback access to the cmd_list_element for the command being invoked. This allows registering the same callback with many commands, and alter the behavior using the cmd_list_element's context. From the comment in cmd_list_element, it sounds like at some point it was the callback function type for set and show functions, hence the "s". But nowadays, it's used for many more commands that need to access the cmd_list_element object (see add_catch_command for example). I don't really see the point of having sfunc at all, since do_sfunc is just a trivial shim that changes the order of the arguments. All commands using sfunc could just as well set cmd_list_element::func to their callback directly. Therefore, remove the sfunc field in cmd_list_element and everything that goes with it. Rename cmd_const_sfunc_ftype to cmd_func_ftype and use it for cmd_list_element::func, as well as for the add_setshow commands. Change-Id: I1eb96326c9b511c293c76996cea0ebc51c70fac0 2021-07-23 Simon Marchi gdb: rename cfunc to simple_func After browsing the CLI code for quite a while and trying really hard, I reached the conclusion that I can't give a meaningful explanation of what "sfunc" and "cfunc" functions are, in cmd_list_element. I don't see a logic at all. That makes it very difficult to do any kind of change. Unless somebody can make sense out of all that, I'd like to try to retro-fit some logic in the cmd_list_element callback function code so that we can understand what is going on, do some cleanups and add new features. The first change is about "cfunc". I can't figure out what the "c" in cfunc means. It's not const, because there's already "const" in "cmd_const_cfunc_ftype", and the previous "cmd_cfunc_ftype" had nothing const.. It's not "cmd" or "command", because there's already "cmd" in "cmd_const_cfunc_ftype". The "main" command callback, cmd_list_element::func, has three parameters, whereas cfunc has two. It is missing the cmd_list_element parameter. So the only reason I see for cfunc to exist is to be a shim between the three and two parameter versions. Most commands don't need to receive the cmd_list_element object, so adding it everywhere would be long and would just add more unnecessary boilerplate. So since this is the "simple" version of the callback, compared to the "full", I suggest renaming cmd_const_cfunc_ftype into cmd_simple_func_ftype, as well as everything (like the utility functions) that goes with it. Change-Id: I4e46cacfd77a66bc1cbf683f6a362072504b7868 2021-07-23 Simon Marchi gdb: make inferior::m_terminal an std::string Same idea as the previous patch, but for m_terminal. Change-Id: If9367d5db8c976a4336680adca4ea5bc31ab64d2 2021-07-23 Simon Marchi gdb: make inferior::m_cwd an std::string Same idea as the previous patch, but for m_cwd. To keep things consistent across the board, change get_inferior_cwd as well, which is shared with GDBserver. So update the related GDBserver code too. Change-Id: Ia2c047fda738d45f3d18bc999eb67ceb8400ce4e 2021-07-23 Simon Marchi gdb: make inferior::m_args an std::string With the current code, both a NULL pointer and an empty string can mean "no arguments". We don't need this distinction. Changing to a string has the advantage that there is now a single state for that (an empty string), which makes the code a bit simpler in my opinion. Change-Id: Icdc622820f7869478791dbaa84b4a1c7fec21ced 2021-07-23 Simon Marchi gdb: add setter/getter for inferior cwd Add cwd/set_cwd to the inferior class, remove set_inferior_args. Keep get_inferior_args, because it is used from fork_inferior, in shared code. The cwd could eventually be passed as a parameter eventually, though, I think that would be cleaner. Change-Id: Ifb72ea865d7e6f9a491308f0d5c1595579d8427e 2021-07-23 Simon Marchi gdb: add setter/getter for inferior arguments Add args/set_args to the inferior class, remove the set_inferior_args and get_inferior_args functions, that would just be wrappers around them. Change-Id: If87d52f3402ce08be26c32897ae8915d9f6d1ea3 2021-07-23 Simon Marchi gdb: remove inferior::{argc,argv} There are currently two states that the inferior args can be stored. The main one is the `args` field, where they are stored as a single string. The other one is the `argc`/`argv` fields. This last one is only used for arguments passed in GDB's command line. And the only outcome is that when get_inferior_args is called, `argc`/`argv` are serialized into `args`. So really, `argc`/`argv` is just a staging area before moving the arguments in `args`. Simplify this by only keeping the `args` field. Change set_inferior_args_vector to immediately serialize the arguments into `args`, work that would be done in get_inferior_args later anyway. The only time where this work would be "wasted" is when the user passes some arguments on the command line, but does not end up running the program. But that just seems unlikely. And it's not that much work. Change-Id: Ica0b9859397c095f6530350c8fb3c36905f2044a 2021-07-23 Simon Marchi gdb: un-share set_inferior_cwd declaration The declaration of set_inferior_cwd is currently shared between gdb and gdbserver, in gdbsupport/common-inferior.h. It doesn't need to be, as set_inferior_cwd is not called from common code. Only get_inferior_cwd needs to. The motivation for this is that a future patch will change the prototype of set_inferior_cwd in gdb, and I don't want to change it for gdbserver unnecessarily. I see this as a good cleanup in any case, to reduce to just the essential what is shared between GDB and GDBserver. Change-Id: I3127d27d078f0503ebf5ccc6fddf14f212426a73 2021-07-23 Simon Marchi gdb.base/setshow.exp: fix duplicate test name Fix: DUPLICATE: gdb.base/setshow.exp: test_setshow_args: show args by giving some explicit test names. Change-Id: I2a738d3d3675ab9b45929e71f5aee0ea6bf92072 2021-07-23 Simon Marchi gdb.base/setshow.exp: split in procs Split in multiple procs, one per topic, and start with a fresh GDB in each. I find it easier to work on a test with multiple smaller independent test procedures. For example, it's possible to comment all but one when working on one. It's also easier to add things without having to think about the impact on existing tests, and vice-versa. Change-Id: I19691eed8f9bcb975b2eeff7577cac66251bcbe2 2021-07-23 Simon Marchi gdb.base/setshow.exp: use save_vars to save/restore gdb_prompt Using save_vars is a bit better than what we have now, as it ensures the variable gets restored if the code within it throws an error. Change-Id: I3bd6836e5b7efb61b078acadff1a1c8182c19a27 2021-07-23 Simon Marchi gdb/testsuite: split gdb.python/py-parameter.exp in procs Split the file into multiple independent test procs, where each proc starts with a fresh GDB. I find it easier to understand what a test is doing when each part of the test is isolated and self-contained. It makes it easier to comment out some parts of the test while working / debugging a specific part. It also makes it easier to add new things (which a subsequent patch will do) without fear of impacting another part of the test. Change-Id: I8b4d52ac82b1492d79b679e13914ed177d8a836d 2021-07-23 Carl Love Fix for gdb.python/py-breakpoint.exp Not all systems have hardware breakpoint support. Add a check to see if the system supports hardware breakpoints. gdb/testsuite/ChangeLog * gdb.python/py-breakpoint.exp (test_hardware_breakpoints): Add check for hardware breakpoint support. 2021-07-23 Andrew Burgess gdb/testsuite: don't error when trying to unset last_spawn_tty_name In spawn_capture_tty_name (lib/gdb.exp) we either set or unset last_spawn_tty_name depending on whether spawn_out(slave,name) exists or not. One situation that might cause spawn_out(slave,name) to not exists is if the spawn function is called with the argument -leaveopen, which is how it is called when processes are created as part of a pipeline, the created process has no tty, instead its output is written to a file descriptor. If a pipeline is created consisting of multiple processes then there will be multiple sequential calls to spawn, all using -leaveopen. The first of these calls is fine, spawn_out(slave,name) is not set, and so in spawn_capture_tty_name we unset last_spawn_tty_name. However, on the second call to spawn, spawn_out(slave,name) is still not set and so in spawn_capture_tty_name we again try to unset last_spawn_tty_name, this now throws an error (as last_spawn_tty_name is already unset). Fix this issue by using -nocomplain with the call to unset in spawn_capture_tty_name. Before this commit I was seeing gdb.base/gnu-debugdata.exp report 1 pass, and 1 unsupported test. After this commit I now see 16 passes from this test script. I have also improved the code that used to do this: if { [info exists spawn_out] } { set ::last_spawn_tty_name $spawn_out(slave,name) } else { ... } The problem here is that we check for the existence of spawn_out, and then unconditionally read spawn_out(slave,name). A situation could arise where some other element of spawn_out is set, e.g. spawn_out(foo), in which case we would enter the if block and try to read a non-existent variable. After this commit we now check specifically for spawn_out(slave,name). Finally, it is worth noting that before this issue was fixed runtest itself, or rather the expect process behind runtest, would segfault while exiting. I haven't looked at all into what the problem is here that caused expect to crash, as fixing the bug in GDB's testing scripts made the segfault go away. 2021-07-23 Jan Beulich x86: express unduly set rounding control bits in disassembly While EVEX.L'L are indeed ignored when EVEX.b stands for just SAE, EVEX.b itself is not ignored when an insn permits neither rounding control nor SAE. While changing this aspect of EVEX.b handling, also alter unduly set embedded broadcast: Don't call BadOp(), screwing up subsequent disassembly, but emit "{bad}" instead. 2021-07-23 GDB Administrator Automatic date update in version.in 2021-07-22 Tom de Vries [gdb/testsuite] Fix FAILs due to PR gcc/101575 When running test-case gdb.ada/formatted_ref.exp with gcc-11 and target board unix/gdb:debug_flags=-gdwarf-4 we run into: ... (gdb) print/x s^M No definition of "s" in current context.^M (gdb) FAIL: gdb.ada/formatted_ref.exp: print/x s ... which is caused by "runto defs.adb:20" taking us to defs__struct1IP: ... (gdb) break defs.adb:20^M Breakpoint 1 at 0x402cfd: defs.adb:20. (2 locations)^M (gdb) run ^M Starting program: formatted_ref ^M ^M Breakpoint 1, defs__struct1IP () at defs.adb:20^M 20 return s.x; -- Set breakpoint marker here.^M (gdb) print s1'access^M ... instead of the expected defs.f1: ... (gdb) break defs.adb:20^M Breakpoint 1 at 0x402d0e: file defs.adb, line 20.^M (gdb) run ^M Starting program: formatted_ref ^M ^M Breakpoint 1, defs.f1 (s=...) at defs.adb:20^M 20 return s.x; -- Set breakpoint marker here.^M ... This is caused by incorrect line info due to gcc PR 101575 - "[gcc-11, -gdwarf-4] Missing .file directive causes invalid line info". Fix this by when landing in defs__struct1IP: - xfailing the runto, and - issuing a continue to land in defs.f1. Likewise in a few other test-cases. Tested on x86_64-linux, with: - system gcc. - gcc-11 and target boards unix/gdb:debug_flags=-gdwarf-4 and unix/gdb:debug_flags=-gdwarf-5. gdb/testsuite/ChangeLog: 2021-07-22 Tom de Vries * gdb.ada/formatted_ref.exp: Add xfail for PR gcc/101575. * gdb.ada/iwide.exp: Same. * gdb.ada/pkd_arr_elem.exp: Same. 2021-07-22 Jan Beulich x86: drop dq{b,d}_mode Their sole use is for {,V}EXTRACTPS / {,V}P{EXT,INS}RB respectively; for consistency also limit use of dqw_mode to Jdqw. 64-bit disassembly reflecting REX.W / VEX.W is not in line with the assembler's opcode table having NoRex64 / VexWIG in all respective templates, i.e. assembly input isn't being honored there either. Obviously the 0FC5 encodings of {,V}PEXTRW then also need adjustment for consistency reasons. x86: drop vex_scalar_w_dq_mode It has only a single use and can easily be represented by dq_mode instead. Plus its handling in intel_operand_size() was duplicating that of vex_vsib_{d,q}_w_dq_mode anyway. x86: drop xmm_m{b,w,d,q}_mode They're effectively redundant with {b,w,d,q}_mode. x86: fold duplicate vector register printing code The bulk of OP_XMM() can be easily reused also for OP_EX(). Break the shared logic out of the function, and invoke the new helper from both places. x86: drop vex_mode and vex_scalar_mode These are fully redundant with, respectively, x_mode and scalar_mode. x86: correct EVEX.V' handling outside of 64-bit mode Unlike the high bit of VEX.vvvv / EVEX.vvvv, EVEX.V' is not ignored outside of 64-bit mode. Oddly enough there already are tests for these cases, but their expectations were wrong. (This may have been based on an old SDM version, where the restriction wasn't properly spelled out.) x86: fold duplicate code in MOVSXD_Fixup() There's no need to have two paths printing the "xd" mnemonic suffix. x86: fold duplicate register printing code What so far was OP_E_register() can be easily reused also for OP_G(). Add suitable parameters to the function and move the invocation of swap_operand() to OP_E(). Adjust MOVSXD's first operand: There never was a need to use movsxd_mode there, and its use gets in the way of the code folding. x86-64: properly bounds-check %bnd in OP_G() The restriction to %bnd0-%bnd3 requires to also check REX.R is clear, just like OP_E_Register() also includes REX.B in its check. x86-64: generalize OP_G()'s EVEX.R' handling EVEX.R' is invalid to be clear not only for mask registers, but also for GPRs - IOW everything handled in this function. 2021-07-22 Jan Beulich x86: correct VCVT{,U}SI2SD rounding mode handling With EVEX.W clear the instruction doesn't ignore the rounding mode, but (like for other insns without rounding semantics) EVEX.b set causes #UD. Hence the handling of EVEX.W needs to be done when processing evex_rounding_64_mode, not at the decode stages. Derive a new 64-bit testcase from the 32-bit one to cover the different EVEX.W treatment in both cases. 2021-07-22 Jan Beulich x86: drop OP_Mask() By moving its vex.r check there it becomes fully redundant with OP_G(). 2021-07-22 GDB Administrator Automatic date update in version.in 2021-07-21 Tom de Vries [gdb/testsuite] Fix gdb.cp/step-and-next-inline.exp with gcc-11 When running test-case gdb.cp/step-and-next-inline.exp with gcc-11, I run into: ... KPASS: gdb.cp/step-and-next-inline.exp: no_header: next step 1 \ (PRMS symtab/25507) FAIL: gdb.cp/step-and-next-inline.exp: no_header: next step 2 KPASS: gdb.cp/step-and-next-inline.exp: no_header: next step 3 \ (PRMS symtab/25507) ... [ Note that I get the same result with gcc-11 and target board unix/gdb:debug_flags=-gdwarf-4, so this is not a dwarf 4 vs 5 issue. ] With gcc-10, I have this trace: ... 64 get_alias_set (&xx); get_alias_set (t=0x601038 ) at step-and-next-inline.cc:51 51 if (t != NULL 40 if (t->x != i) 52 && TREE_TYPE (t).z != 1 43 return x; 53 && TREE_TYPE (t).z != 2 43 return x; 54 && TREE_TYPE (t).z != 3) 43 return x; main () at step-and-next-inline.cc:65 65 return 0; ... and with gcc-11, I have instead: ... 64 get_alias_set (&xx); get_alias_set (t=0x601038 ) at step-and-next-inline.cc:51 51 if (t != NULL 52 && TREE_TYPE (t).z != 1 43 return x; 53 && TREE_TYPE (t).z != 2 43 return x; 54 && TREE_TYPE (t).z != 3) 43 return x; main () at step-and-next-inline.cc:65 65 return 0; ... and with clang-10, I have instead: ... 64 get_alias_set (&xx); get_alias_set (t=0x601034 ) at step-and-next-inline.cc:51 51 if (t != NULL 52 && TREE_TYPE (t).z != 1 53 && TREE_TYPE (t).z != 2 54 && TREE_TYPE (t).z != 3) 51 if (t != NULL 57 } main () at step-and-next-inline.cc:65 65 return 0; ... The test-case tries to verify that we don't step into inlined function tree_check (lines 40-43) (so, with the clang trace we get that right). The test-case then tries to kfail the problems when using gcc, but this is done in such a way that the testing still gets out of sync after a failure. That is: the "next step 2" check that is supposed to match "TREE_TYPE (t).z != 2" is actually matching "TREE_TYPE (t).z != 1": ... (gdb) next^M 52 && TREE_TYPE (t).z != 1^M (gdb) PASS: gdb.cp/step-and-next-inline.exp: no_header: next step 2 ... Fix this by issuing extra nexts to arrive at the required lines. Tested on x86_64-linux, with gcc-8, gcc-9, gcc-10, gcc-11, clang-8, clang-10 and clang-12. gdb/testsuite/ChangeLog: 2021-07-20 Tom de Vries * gdb.cp/step-and-next-inline.cc (tree_check, get_alias_set, main): Tag closing brace with comment. * gdb.cp/step-and-next-inline.h: Update to keep identical with step-and-next-inline.cc. * gdb.cp/step-and-next-inline.exp: Issue extra next when required. 2021-07-21 Nick Clifton Updated Russian translation for the bfd library 2021-07-21 Luca Boccassi Allows linker scripts to set the SEC_READONLY flag. * ld.texi: Document new output section type. * ldgram.y: Add new token. * ldlang.c: Handle the new flag. * ldlang.h: Add readonly_section to list of section types. * ldlex.l: Add a new identifier. * testsuite/ld-scripts/output-section-types.t: New example linker script. * testsuite/ld-scripts/output-section-types.d: Test driver. * testsyute/ld-scripts/script.exp: Run the new test. 2021-07-21 Tom de Vries [gdb/testsuite] Fix FAILs due to PR gcc/101452 When running test-case gdb.base/ptype-offsets.exp with gcc-11 (with -gdwarf-5 default) or gcc-10 with target board unix/gdb:debug_flags=-gdwarf-5 we run into this regression: ... (gdb) ptype/o static_member^M /* offset | size */ type = struct static_member {^M - static static_member Empty;^M /* 0 | 4 */ int abc;^M ^M /* total size (bytes): 4 */^M }^M -(gdb) PASS: gdb.base/ptype-offsets.exp: ptype/o static_member +(gdb) FAIL: gdb.base/ptype-offsets.exp: ptype/o static_member ... This is caused by missing debug info, which I filed as gcc PR101452 - "[debug, dwarf-5] undefined static member removed by -feliminate-unused-debug-symbols". It's not clear yet whether this is a bug or a feature, but work around this in the test-cases by: - defining the static member - adding additional_flags=-fno-eliminate-unused-debug-types. Tested on x86_64-linux. gdb/testsuite/ChangeLog: 2021-07-20 Tom de Vries * lib/gdb.exp (gcc_major_version): New proc. * gdb.base/ptype-offsets.cc: Define static member static_member::Empty. * gdb.cp/templates.exp: Define static member using -DGCC_BUG. * gdb.cp/m-static.exp: Add additional_flags=-fno-eliminate-unused-debug-types. * gdb.cp/pr-574.exp: Same. * gdb.cp/pr9167.exp: Same. 2021-07-21 Tom de Vries [gdb/testsuite] Add KFAILs for gdb.ada FAILs with gcc-11 With gcc-11 we run into: ... (gdb) print pa_ptr.all^M That operation is not available on integers of more than 8 bytes.^M (gdb) KFAIL: gdb.ada/arrayptr.exp: scenario=all: print pa_ptr.all (PRMS: gdb/20991) ... This is due to PR exp/20991 - "__int128 type support". Mark this and similar FAILs as KFAIL. Also mark this FAIL: .... (gdb) print pa_ptr(3)^M cannot subscript or call something of type `foo__packed_array_ptr'^M (gdb) FAIL: gdb.ada/arrayptr.exp: scenario=minimal: print pa_ptr(3) ... as a KFAIL for PR ada/28115 - "Support packed array encoded as DW_TAG_subrange_type". Tested on x86_64-linux, with gcc-10 and gcc-11. gdb/testsuite/ChangeLog: 2021-07-21 Tom de Vries * gdb.ada/arrayptr.exp: Add KFAILs for PR20991 and PR28115. * gdb.ada/exprs.exp: Add KFAILs for PR20991. * gdb.ada/packed_array_assign.exp: Same. 2021-07-21 Alan Modra as_bad_subtract Many places report errors of the nature "can't resolve a - b". This provides a utility function to report such errors consistently. I removed the section reporting and quotes around symbol names while I was at it. Compare ifunc-2.s:4: Error: can't resolve `bar1' {.text.1 section} - `foo1' {.text.1 section} with ifunc-2.s:4: Error: can't resolve bar1 - foo1 In many cases the section names don't help the user very much in figuring out what went wrong, and the quotes if present arguably ought to be placed around the entire expression: can't resolve `bar1 - foo1' The patch also tidies some tc_get_reloc functions that leak memory on error paths. * write.h (as_bad_subtract): Declare. * write.c (as_bad_subtract): New function. (fixup_segment): Use as_bad_subtract. * config/tc-arc.c (md_apply_fix): Likewise. * config/tc-avr.c (md_apply_fix, tc_gen_reloc): Likewise. * config/tc-cris.c (md_apply_fix): Likewise. * config/tc-d10v.c (md_apply_fix): Likewise. * config/tc-d30v.c (md_apply_fix): Likewise. * config/tc-ft32.c (md_apply_fix): Likewise. * config/tc-h8300.c (tc_gen_reloc): Likewise. * config/tc-m68hc11.c (md_apply_fix): Likewise. * config/tc-mmix.c (mmix_frob_file): Likewise. * config/tc-mn10200.c (tc_gen_reloc): Likewise. * config/tc-nds32.c (nds32_apply_fix): Likewise. * config/tc-pru.c (md_apply_fix): Likewise. * config/tc-riscv.c (md_apply_fix): Likewise. * config/tc-s12z.c (md_apply_fix): Likewise. * config/tc-s390.c (md_apply_fix): Likewise. * config/tc-tilegx.c (md_apply_fix): Likewise. * config/tc-tilepro.c (md_apply_fix): Likewise. * config/tc-v850.c (md_apply_fix): Likewise. * config/tc-vax.c (md_apply_fix): Likewise. * config/tc-xc16x.c (tc_gen_reloc): Likewise. * config/tc-xgate.c (md_apply_fix): Likewise. * config/tc-xstormy16.c (xstormy16_md_apply_fix): Likewise. * config/tc-xtensa.c (md_apply_fix): Likewise. * config/tc-z80.c (tc_gen_reloc): Likewise. * config/tc-spu.c (md_apply_fix): Likewise. (tc_gen_reloc): Delete dead code. Free memory on error. * config/tc-cr16.c (tc_gen_reloc): Use as_bad_subtract. Free on error. * config/tc-crx.c (tc_gen_reloc): Likewise. * config/tc-ppc.c (tc_gen_reloc): Likewise. * testsuite/gas/i386/ifunc-2.l: Adjust to suit changed error message. * testsuite/gas/mips/lui-2.l: Likewise. * testsuite/gas/tic6x/reloc-bad-1.l: Likewise. 2021-07-21 John Ericson Remove `netbsdpe` support netbsdpe was deprecated in c2ce831330e10dab4703094491f80b6b9a5c2289. Since then, a release has passed (2.37), and it was marked obselete in 5c9cbf07f3f972ecffe13d858010b3179df17b32. Unless I am mistaken, that means we can now remove support altogether. All branches in the "active" code are remove, and the target is additionally marked as obsolete next to the other removed ones for libbfd and gdb. Per [1] from the NetBSD toolchain list, PE/COFF support was removed a decade ago. Furthermore, the sole mention of this target in the binutils commit history was in 2002. Together, I'm led to believe this target hasn't seen much attention in quite a while. [1]: https://mail-index.netbsd.org/tech-toolchain/2021/06/16/msg003996.html bfd/ * config.bfd: Remove netbsdpe entry. binutils/ * configure.ac: Remove netbsdpe entry. * testsuite/lib/binutils-common.exp (is_pecoff_format): Likewise. * configure: Regenerate. gas/ * configure.tgt: Remove netbsdpe entry. gdb/ * configure.tgt: Add netbsdpe to removed targets. ld/ * configure.tgt: Remove netbsdpe entry. * testsuite/ld-bootstrap/bootstrap.exp: Likewise. 2021-07-21 GDB Administrator Automatic date update in version.in 2021-07-20 Alan Modra PR28106, build of 2.37 fails on FreeBSD and Clang https://en.cppreference.com/w/cpp/types/NULL says NULL might be defined as nullptr. https://en.cppreference.com/w/cpp/language/reinterpret_cast says reinterpret_cast can't be used on nullptr. PR gold/28106 PR gold/27815 * gc.h (gc_process_relocs): Use static_cast in Section_id constructor. 2021-07-20 Luis Machado Fix printing of non-address types when memory tagging is enabled When the architecture supports memory tagging, we handle pointer/reference types in a special way, so we can validate tags and show mismatches. Unfortunately, the currently implementation errors out when the user prints non-address values: composite types, floats, references, member functions and other things. Vector registers: (gdb) p $v0 Value can't be converted to integer. Non-existent internal variables: (gdb) p $foo Value can't be converted to integer. The same happens for complex types and printing struct/union types. There are a few problems here. The first one is that after print_command_1 evaluates the expression to print, the tag validation code call value_as_address unconditionally, without making sure we have have a suitable type where it makes to sense to call it. That results in value_as_address (if it isn't given a pointer-like type) trying to treat the value as an integer and convert it to an address, which #1 - doesn't make sense (i.e., no sense in validating tags after "print 1"), and throws for non-integer-convertible types. We fix this by making sure we have a pointer or reference type first, and only if so then proceed to check if the address-like value has tags. The second is that we're calling value_as_address even if we have an optimized out or unavailable value, which throws, because the value's contents aren't fully accessible/readable. This error currently escapes out and aborts the print. This case is fixed by checking for optimized out / unavailable explicitly. Third, the tag checking process does not gracefully handle exceptions. If any exception is thrown from the tag validation code, we abort the print. E.g., the target may fail to access tags via a running thread. Or the needed /proc files aren't available. Or some other untold reason. This is a bit too rigid. This commit changes print_command_1 to catch errors, print them, and still continue with the normal expression printing path instead of erroring out and printing nothing useful. With this patch, printing works correctly again: (gdb) p $v0 $1 = {d = {f = {2.0546950501119882e-81, 2.0546950501119882e-81}, u = {3399988123389603631, 3399988123389603631}, s = { 3399988123389603631, 3399988123389603631}}, s = {f = {1.59329203e-10, 1.59329203e-10, 1.59329203e-10, 1.59329203e-10}, u = { 791621423, 791621423, 791621423, 791621423}, s = {791621423, 791621423, 791621423, 791621423}}, h = {bf = {1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10, 1.592e-10}, f = {0.11224, 0.11224, 0.11224, 0.11224, 0.11224, 0.11224, 0.11224, 0.11224}, u = {12079, 12079, 12079, 12079, 12079, 12079, 12079, 12079}, s = {12079, 12079, 12079, 12079, 12079, 12079, 12079, 12079}}, b = {u = {47 }, s = {47 }}, q = {u = { 62718710765820030520700417840365121327}, s = {62718710765820030520700417840365121327}}} (gdb) p $foo $2 = void (gdb) p 2 + 2i $3 = 2 + 2i Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28110 2021-07-20 Nelson Chu RISC-V: Minor updates for architecture parser. * Two add subset functions is redundant. Keep the riscv_add_implicit_subset, and renamed it to riscv_add_subset. Besides, if the subset is added in order, then we just add it at the tail of the subset list. * Removed the "-march:" prefix from the error messages. Since not only the -march= option will use the parser, but also the architecture elf attributes, the default architecture setting and linker will use the same parser. * Use a function, riscv_parse_check_conflicts, to check the conflicts of extensions, including the rv64e and rv32q. The rv32emc-elf/rv32i-elf/rv32gc-linux/rv64gc-elf/rv64gc-linux regressions are tested and passed. bfd/ * elfxx-riscv.c (riscv_lookup_subset): Check the subset tail list first. If the subset is added in order, then we can just add it to the tail without searching the whole list. (riscv_add_subset): Replaced by riscv_add_implicit_subset. (riscv_add_implicit_subset): Renamed to riscv_add_subset. (riscv_parse_add_subset): Updated. (riscv_parsing_subset_version): Removed the "-march:" prefix from the error message. (riscv_parse_prefixed_ext): Likewise. (riscv_parse_std_ext): Likewise. And move the rve check to riscv_parse_check_conflicts. (riscv_parse_check_conflicts): New function used to check conflicts. (riscv_parse_subset): Updated. gas/ * testsuite/gas/riscv/march-fail-base-02.l: Updated. * testsuite/gas/riscv/march-fail-unknown-std.l: Likewise. 2021-07-20 GDB Administrator Automatic date update in version.in 2021-07-19 Simon Marchi gdb: set current thread in btrace_compute_ftrace_{bts,pt} As documented in bug 28086, test gdb.btrace/enable-new-thread.exp started failing with commit 0618ae414979 ("gdb: optimize all_matching_threads_iterator"): (gdb) record btrace^M (gdb) PASS: gdb.btrace/enable-new-thread.exp: record btrace break 24^M Breakpoint 2 at 0x555555555175: file /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.btrace/enable-new-thread.c, line 24.^M (gdb) continue^M Continuing.^M /home/smarchi/src/binutils-gdb/gdb/inferior.c:303: internal-error: inferior* find_inferior_pid(process_stratum_target*, int): Assertion `pid != 0' failed.^M A problem internal to GDB has been detected,^M further debugging may prove unreliable.^M Quit this debugging session? (y or n) FAIL: gdb.btrace/enable-new-thread.exp: continue to breakpoint: cont to bp.1 (GDB internal error) Note that I only see the failure if GDB is compiled without libipt support. This is because GDB then makes use BTS instead of PT, so exercises different code paths. I think that the commit above just exposed an existing problem. The stack trace of the internal error is: #8 0x0000561cb81e404e in internal_error (file=0x561cb83aa2f8 "/home/smarchi/src/binutils-gdb/gdb/inferior.c", line=303, fmt=0x561cb83aa099 "%s: Assertion `%s' failed.") at /home/smarchi/src/binutils-gdb/gdbsupport/errors.cc:55 #9 0x0000561cb7b5c031 in find_inferior_pid (targ=0x561cb8aafb60 , pid=0) at /home/smarchi/src/binutils-gdb/gdb/inferior.c:303 #10 0x0000561cb7b5c102 in find_inferior_ptid (targ=0x561cb8aafb60 , ptid=...) at /home/smarchi/src/binutils-gdb/gdb/inferior.c:317 #11 0x0000561cb7f1d1c3 in find_thread_ptid (targ=0x561cb8aafb60 , ptid=...) at /home/smarchi/src/binutils-gdb/gdb/thread.c:487 #12 0x0000561cb7f1b921 in all_matching_threads_iterator::all_matching_threads_iterator (this=0x7ffc4ee34678, filter_target=0x561cb8aafb60 , filter_ptid=...) at /home/smarchi/src/binutils-gdb/gdb/thread-iter.c:125 #13 0x0000561cb77bc462 in filtered_iterator::filtered_iterator (this=0x7ffc4ee34670) at /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/filtered-iterator.h:42 #14 0x0000561cb77b97cb in all_non_exited_threads_range::begin (this=0x7ffc4ee34650) at /home/smarchi/src/binutils-gdb/gdb/thread-iter.h:243 #15 0x0000561cb7d8ba30 in record_btrace_target::record_is_replaying (this=0x561cb8aa6250 , ptid=...) at /home/smarchi/src/binutils-gdb/gdb/record-btrace.c:1411 #16 0x0000561cb7d8bb83 in record_btrace_target::xfer_partial (this=0x561cb8aa6250 , object=TARGET_OBJECT_MEMORY, annex=0x0, readbuf=0x7ffc4ee34c58 "\260g\343N\374\177", writebuf=0x0, offset=140737352774277, len=1, xfered_len=0x7ffc4ee34ad8) at /home/smarchi/src/binutils-gdb/gdb/record-btrace.c:1437 #17 0x0000561cb7ef73a9 in raw_memory_xfer_partial (ops=0x561cb8aa6250 , readbuf=0x7ffc4ee34c58 "\260g\343N\374\177", writebuf=0x0, memaddr=140737352774277, len=1, xfered_len=0x7ffc4ee34ad8) at /home/smarchi/src/binutils-gdb/gdb/target.c:1504 #18 0x0000561cb7ef77da in memory_xfer_partial_1 (ops=0x561cb8aa6250 , object=TARGET_OBJECT_CODE_MEMORY, readbuf=0x7ffc4ee34c58 "\260g\343N\374\177", writebuf=0x0, memaddr=140737352774277, len=1, xfered_len=0x7ffc4ee34ad8) at /home/smarchi/src/binutils-gdb/gdb/target.c:1635 #19 0x0000561cb7ef78b5 in memory_xfer_partial (ops=0x561cb8aa6250 , object=TARGET_OBJECT_CODE_MEMORY, readbuf=0x7ffc4ee34c58 "\260g\343N\374\177", writebuf=0x0, memaddr=140737352774277, len=1, xfered_len=0x7ffc4ee34ad8) at /home/smarchi/src/binutils-gdb/gdb/target.c:1664 #20 0x0000561cb7ef7ba4 in target_xfer_partial (ops=0x561cb8aa6250 , object=TARGET_OBJECT_CODE_MEMORY, annex=0x0, readbuf=0x7ffc4ee34c58 "\260g\343N\374\177", writebuf=0x0, offset=140737352774277, len=1, xfered_len=0x7ffc4ee34ad8) at /home/smarchi/src/binutils-gdb/gdb/target.c:1721 #21 0x0000561cb7ef8503 in target_read_partial (ops=0x561cb8aa6250 , object=TARGET_OBJECT_CODE_MEMORY, annex=0x0, buf=0x7ffc4ee34c58 "\260g\343N\374\177", offset=140737352774277, len=1, xfered_len=0x7ffc4ee34ad8) at /home/smarchi/src/binutils-gdb/gdb/target.c:1974 #22 0x0000561cb7ef861f in target_read (ops=0x561cb8aa6250 , object=TARGET_OBJECT_CODE_MEMORY, annex=0x0, buf=0x7ffc4ee34c58 "\260g\343N\374\177", offset=140737352774277, len=1) at /home/smarchi/src/binutils-gdb/gdb/target.c:2014 #23 0x0000561cb7ef809f in target_read_code (memaddr=140737352774277, myaddr=0x7ffc4ee34c58 "\260g\343N\374\177", len=1) at /home/smarchi/src/binutils-gdb/gdb/target.c:1869 #24 0x0000561cb7937f4d in gdb_disassembler::dis_asm_read_memory (memaddr=140737352774277, myaddr=0x7ffc4ee34c58 "\260g\343N\374\177", len=1, info=0x7ffc4ee34e88) at /home/smarchi/src/binutils-gdb/gdb/disasm.c:139 #25 0x0000561cb80ab66d in fetch_data (info=0x7ffc4ee34e88, addr=0x7ffc4ee34c59 "g\343N\374\177") at /home/smarchi/src/binutils-gdb/opcodes/i386-dis.c:194 #26 0x0000561cb80ab7e2 in ckprefix () at /home/smarchi/src/binutils-gdb/opcodes/i386-dis.c:8628 #27 0x0000561cb80adbd8 in print_insn (pc=140737352774277, info=0x7ffc4ee34e88) at /home/smarchi/src/binutils-gdb/opcodes/i386-dis.c:9587 #28 0x0000561cb80abe4f in print_insn_i386 (pc=140737352774277, info=0x7ffc4ee34e88) at /home/smarchi/src/binutils-gdb/opcodes/i386-dis.c:8894 #29 0x0000561cb7744a19 in default_print_insn (memaddr=140737352774277, info=0x7ffc4ee34e88) at /home/smarchi/src/binutils-gdb/gdb/arch-utils.c:1029 #30 0x0000561cb7b33067 in i386_print_insn (pc=140737352774277, info=0x7ffc4ee34e88) at /home/smarchi/src/binutils-gdb/gdb/i386-tdep.c:4013 #31 0x0000561cb7acd8f4 in gdbarch_print_insn (gdbarch=0x561cbae2fb60, vma=140737352774277, info=0x7ffc4ee34e88) at /home/smarchi/src/binutils-gdb/gdb/gdbarch.c:3478 #32 0x0000561cb793a32d in gdb_disassembler::print_insn (this=0x7ffc4ee34e80, memaddr=140737352774277, branch_delay_insns=0x0) at /home/smarchi/src/binutils-gdb/gdb/disasm.c:795 #33 0x0000561cb793a5b0 in gdb_print_insn (gdbarch=0x561cbae2fb60, memaddr=140737352774277, stream=0x561cb8ac99f8 , branch_delay_insns=0x0) at /home/smarchi/src/binutils-gdb/gdb/disasm.c:850 #34 0x0000561cb793a631 in gdb_insn_length (gdbarch=0x561cbae2fb60, addr=140737352774277) at /home/smarchi/src/binutils-gdb/gdb/disasm.c:859 #35 0x0000561cb77f53f4 in btrace_compute_ftrace_bts (tp=0x561cbba11210, btrace=0x7ffc4ee35188, gaps=...) at /home/smarchi/src/binutils-gdb/gdb/btrace.c:1107 #36 0x0000561cb77f55f5 in btrace_compute_ftrace_1 (tp=0x561cbba11210, btrace=0x7ffc4ee35180, cpu=0x0, gaps=...) at /home/smarchi/src/binutils-gdb/gdb/btrace.c:1527 #37 0x0000561cb77f5705 in btrace_compute_ftrace (tp=0x561cbba11210, btrace=0x7ffc4ee35180, cpu=0x0) at /home/smarchi/src/binutils-gdb/gdb/btrace.c:1560 #38 0x0000561cb77f583b in btrace_add_pc (tp=0x561cbba11210) at /home/smarchi/src/binutils-gdb/gdb/btrace.c:1589 #39 0x0000561cb77f5a86 in btrace_enable (tp=0x561cbba11210, conf=0x561cb8ac6878 ) at /home/smarchi/src/binutils-gdb/gdb/btrace.c:1629 #40 0x0000561cb7d88d26 in record_btrace_enable_warn (tp=0x561cbba11210) at /home/smarchi/src/binutils-gdb/gdb/record-btrace.c:294 #41 0x0000561cb7c603dc in std::__invoke_impl (__f=@0x561cbb6c4878: 0x561cb7d88cdc ) at /usr/include/c++/10/bits/invoke.h:60 #42 0x0000561cb7c5e5a6 in std::__invoke_r (__fn=@0x561cbb6c4878: 0x561cb7d88cdc ) at /usr/include/c++/10/bits/invoke.h:153 #43 0x0000561cb7c5dc92 in std::_Function_handler::_M_invoke(std::_Any_data const&, thread_info*&&) (__functor=..., __args#0=@0x7ffc4ee35310: 0x561cbba11210) at /usr/include/c++/10/bits/std_function.h:291 #44 0x0000561cb7f2600f in std::function::operator()(thread_info*) const (this=0x561cbb6c4878, __args#0=0x561cbba11210) at /usr/include/c++/10/bits/std_function.h:622 #45 0x0000561cb7f23dc8 in gdb::observers::observable::notify (this=0x561cb8ac5aa0 , args#0=0x561cbba11210) at /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/observable.h:150 #46 0x0000561cb7f1c436 in add_thread_silent (targ=0x561cb8aafb60 , ptid=...) at /home/smarchi/src/binutils-gdb/gdb/thread.c:263 #47 0x0000561cb7f1c479 in add_thread_with_info (targ=0x561cb8aafb60 , ptid=..., priv=0x561cbb3f7ab0) at /home/smarchi/src/binutils-gdb/gdb/thread.c:272 #48 0x0000561cb7bfa1d0 in record_thread (info=0x561cbb0413a0, tp=0x0, ptid=..., th_p=0x7ffc4ee35610, ti_p=0x7ffc4ee35620) at /home/smarchi/src/binutils-gdb/gdb/linux-thread-db.c:1380 #49 0x0000561cb7bf7a2a in thread_from_lwp (stopped=0x561cba81db20, ptid=...) at /home/smarchi/src/binutils-gdb/gdb/linux-thread-db.c:429 #50 0x0000561cb7bf7ac5 in thread_db_notice_clone (parent=..., child=...) at /home/smarchi/src/binutils-gdb/gdb/linux-thread-db.c:447 #51 0x0000561cb7bdc9a2 in linux_handle_extended_wait (lp=0x561cbae25720, status=4991) at /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:1981 #52 0x0000561cb7bdf0f3 in linux_nat_filter_event (lwpid=435403, status=198015) at /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:2920 #53 0x0000561cb7bdfed6 in linux_nat_wait_1 (ptid=..., ourstatus=0x7ffc4ee36398, target_options=...) at /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:3202 #54 0x0000561cb7be0b68 in linux_nat_target::wait (this=0x561cb8aafb60 , ptid=..., ourstatus=0x7ffc4ee36398, target_options=...) at /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:3440 #55 0x0000561cb7bfa2fc in thread_db_target::wait (this=0x561cb8a9acd0 , ptid=..., ourstatus=0x7ffc4ee36398, options=...) at /home/smarchi/src/binutils-gdb/gdb/linux-thread-db.c:1412 #56 0x0000561cb7d8e356 in record_btrace_target::wait (this=0x561cb8aa6250 , ptid=..., status=0x7ffc4ee36398, options=...) at /home/smarchi/src/binutils-gdb/gdb/record-btrace.c:2547 #57 0x0000561cb7ef996d in target_wait (ptid=..., status=0x7ffc4ee36398, options=...) at /home/smarchi/src/binutils-gdb/gdb/target.c:2608 #58 0x0000561cb7b6d297 in do_target_wait_1 (inf=0x561cba6d8780, ptid=..., status=0x7ffc4ee36398, options=...) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:3640 #59 0x0000561cb7b6d43e in operator() (__closure=0x7ffc4ee36190, inf=0x561cba6d8780) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:3701 #60 0x0000561cb7b6d7b2 in do_target_wait (ecs=0x7ffc4ee36370, options=...) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:3720 #61 0x0000561cb7b6e67d in fetch_inferior_event () at /home/smarchi/src/binutils-gdb/gdb/infrun.c:4069 #62 0x0000561cb7b4659b in inferior_event_handler (event_type=INF_REG_EVENT) at /home/smarchi/src/binutils-gdb/gdb/inf-loop.c:41 #63 0x0000561cb7be25f7 in handle_target_event (error=0, client_data=0x0) at /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:4227 #64 0x0000561cb81e4ee2 in handle_file_event (file_ptr=0x561cbae24e10, ready_mask=1) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:575 #65 0x0000561cb81e5490 in gdb_wait_for_event (block=0) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:701 #66 0x0000561cb81e41be in gdb_do_one_event () at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:212 #67 0x0000561cb7c18096 in start_event_loop () at /home/smarchi/src/binutils-gdb/gdb/main.c:421 #68 0x0000561cb7c181e0 in captured_command_loop () at /home/smarchi/src/binutils-gdb/gdb/main.c:481 #69 0x0000561cb7c19d7e in captured_main (data=0x7ffc4ee366a0) at /home/smarchi/src/binutils-gdb/gdb/main.c:1353 #70 0x0000561cb7c19df0 in gdb_main (args=0x7ffc4ee366a0) at /home/smarchi/src/binutils-gdb/gdb/main.c:1368 #71 0x0000561cb7693186 in main (argc=11, argv=0x7ffc4ee367b8) at /home/smarchi/src/binutils-gdb/gdb/gdb.c:32 At frame 45, the new_thread observable is fired. At this moment, the new thread isn't the current thread, inferior_ptid is null_ptid. I think this is ok: the new_thread observable doesn't give any guarantee on the global context when observers are invoked. Frame 35, btrace_compute_ftrace_bts, calls gdb_insn_length. gdb_insn_length doesn't have a thread_info or other parameter what could indicate where to read memory from, it implicitly uses the global context (inferior_ptid). So we reach the all_non_exited_threads_range in record_btrace_target::record_is_replaying with a null inferior_ptid. The previous implemention of all_non_exited_threads_range didn't care, but the new one does. The problem of calling gdb_insn_length and ultimately trying to read memory with a null inferior_ptid already existed, but the commit mentioned above made it visible. Something between frames 40 (record_btrace_enable_warn) and 35 (btrace_compute_ftrace_bts) needs to be switching the global context to make TP the current thread. Since btrace_compute_ftrace_bts takes the thread_info to work with as a parameter, that typically means that it doesn't require its caller to also set the global current context (current thread) when calling. If it needs to call other functions that do require the global current thread to be set, then it needs to temporarily change the current thread while calling these other functions. Therefore, switch and restore the current thread in btrace_compute_ftrace_bts. By inspection, it looks like btrace_compute_ftrace_pt may also call functions sensitive to the global context: it installs the btrace_pt_readmem_callback callback in the PT instruction decoder. When this function gets called, inferior_ptid must be set appropriately. Add a switch and restore in there too. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28086 Change-Id: I407fbfe41aab990068bd102491aa3709b0a034b3 2021-07-19 GDB Administrator Automatic date update in version.in 2021-07-18 Nick Clifton Move pending-obsolesence targets onto the obsolete list. * config.bfd: Move pending obsoletion targets to obsolete list. Update how-to-make-a-release checklist with latest changes from 2.37 release 2021-07-18 Michael Krasnyk PR28098 Skip R_*_NONE relocation entries with zero r_sym without counting PR gold/28098 * reloc.cc (Track_relocs::advance): Skip R_*_NONE relocation entries with r_sym of zero without counting in advance method. 2021-07-18 Simon Marchi gdb: convert nat/x86-dregs.c macros to functions I'm debugging why GDB crashes on OpenBSD/amd64, turns out it's because x86_dr_low.get_status is nullptr. It would have been useful to be able to break on x86_dr_low_get_status, so I thought it would be a good reason to convert these function-like macros into functions. Change-Id: Ic200b50ef8455b4697bc518da0fa2bb704cf4721 2021-07-18 GDB Administrator Automatic date update in version.in 2021-07-17 Tom Tromey Fix file-name handling regression with DWARF index When run with the gdb-index or debug-names target boards, dup-psym.exp fails. This came up for me because my new DWARF scanner reuses this part of the existing index code, and so it registers as a regression. This is PR symtab/25834. Looking into this, I found that the DWARF index code here is fairly different from the psymtab code. I don't think there's a deep reason for this, and in fact, it seemed to me that the index code could simply mimic what the psymtab code already does. That is what this patch implements. The DW_AT_name and DW_AT_comp_dir are now stored in the quick file names table. This may require allocating a quick file names table even when DW_AT_stmt_list does not exist. Then, the functions that work with this data are changed to use find_source_or_rewrite, just as the psymbol code does. Finally, line_header::file_full_name is removed, as it is no longer needed. Currently, the index maintains a hash table of "quick file names". The hash table uses a deletion function to free the "real name" components when necessary. There's also a second such function to implement the forget_cached_source_info method. This bug fix patch will create a quick file name object even when there is no DW_AT_stmt_list, meaning that the object won't be entered in the hash table. So, this patch changes the memory management approach so that the entries are cleared when the per-BFD object is destroyed. (A dwarf2_per_cu_data destructor is not introduced, because we have been avoiding adding a vtable to that class.) Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=25834 2021-07-17 Tom Tromey Check for debug-types in map_symbol_filenames map_symbol_filenames can skip type units -- in fact I think it has to, due to the assertion at the top of dw2_get_file_names. This may be a regression due to the TU/CU unification patch, I did not check. Simplify DWARF file name caching The DWARF index file name caching code only records when a line table has been read and the reading failed. However, the code would be simpler if it recorded any attempt, which is what this patch implements. Introduce find_source_or_rewrite The final bug fix in this series would duplicate the logic in psymtab_to_fullname, so this patch extracts the body of this function into a new function. Simplify file_and_directory storage management file_and_directory carries a std::string in case the compilation directory is computed, but a subsequent patch wants to preserve this string without also having to maintain the storage for it. So, this patch arranges for the compilation directory string to be stored in the per-BFD string bcache instead. Pass file_and_directory through DWARF line-decoding code This patch removes the redundant "comp_unit" parameter from compute_include_file_name, and arranges to pass a file_and_directory object from the readers down to this function. It also changes the partial symtab reader to use find_file_and_directory, rather than reimplement this functionality by hand. Rename and refactor psymtab_include_file_name In order to fix an index-related regression, I want to use psymtab_include_file_name in the DWARF index file-handling code. This patch renames this function and changes it to no longer require a partial symtab to be passed in. A subsequent patch will further refactor this code to remove the redundant parameter (which was always there but is now more obvious). 2021-07-17 Sergey Belyashov Add basic Z80 CPU support Supported ISAs: - Z80 (all undocumented instructions) - Z180 - eZ80 (Z80 mode only) Datasheets: Z80: https://www.zilog.com/manage_directlink.php?filepath=docs/z80/um0080&extn=.pdf Z180: https://www.zilog.com/manage_directlink.php?filepath=docs/z180/ps0140&extn=.pdf eZ80: http://www.zilog.com/force_download.php?filepath=YUhSMGNEb3ZMM2QzZHk1NmFXeHZaeTVqYjIwdlpHOWpjeTlWVFRBd056Y3VjR1Jt To debug Z80 programs using GDB you must configure and embed z80-stub.c to your program (SDCC compiler is required). Or you may use some simulator with GDB support. gdb/ChangeLog: * Makefile.in (ALL_TARGET_OBS): Add z80-tdep.c. * NEWS: Mention z80 support. * configure.tgt: Handle z80*. * features/Makefile (XMLTOC): Add z80.xml. * features/z80-cpu.xml: New. * features/z80.c: Generate. * features/z80.xml: New. * z80-tdep.c: New file. * z80-tdep.h: New file. gdb/stubs/ChangeLog: * z80-stub.c: New file. Change-Id: Id0b7a6e210c3f93c6853c5e3031b7bcee47d0db9 2021-07-17 Simon Marchi gdb: make all_inferiors_safe actually work The test gdb.threads/fork-plus-threads.exp fails since 08bdefb58b78 ("gdb: make inferior_list use intrusive_list"): FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left Looking at the log, we see that we are left with a bunch of inferiors in the detach-on-fork=off case: info inferiors^M Num Description Connection Executable ^M * 1 /fork-plus-threads ^M 2 /fork-plus-threads ^M 3 /fork-plus-threads ^M 4 /fork-plus-threads ^M 5 /fork-plus-threads ^M 6 /fork-plus-threads ^M 7 /fork-plus-threads ^M 8 /fork-plus-threads ^M 9 /fork-plus-threads ^M 10 /fork-plus-threads ^M 11 /fork-plus-threads ^M (gdb) FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left when we expect to have just one. The problem is prune_inferiors not pruning inferiors. And this is caused by all_inferiors_safe not actually iterating on inferiors. The current implementation: inline all_inferiors_safe_range all_inferiors_safe () { return {}; } default-constructs an all_inferiors_safe_range, which default-constructs an all_inferiors_safe_iterator as its m_begin field, which default-constructs a all_inferiors_iterator. A default-constructed all_inferiors_iterator is an end iterator, which means we have constructed an (end,end) all_inferiors_safe_range. We actually need to pass down the list on which we want to iterator (that is the inferior_list global), so that all_inferiors_iterator's first constructor is chosen. We also pass nullptr as the proc_target filter. In this case, we don't do any filtering, but if in the future all_inferiors_safe needed to allow filtering on process target (like all_inferiors does), we could pass down a process target pointer. basic_safe_iterator's constructor needs to be changed to allow constructing the wrapped iterator with multiple arguments, not just one. With this, gdb.threads/fork-plus-threads.exp is passing once again for me. Change-Id: I650552ede596e3590c4b7606ce403690a0278a01 2021-07-17 GDB Administrator Automatic date update in version.in 2021-07-16 Lancelot SIX gdb: Support stepping out from signal handler on riscv*-linux Currently, gdb cannot step outside of a signal handler on RISC-V platforms. This causes multiple failures in gdb.base/sigstep.exp: FAIL: gdb.base/sigstep.exp: continue to handler, nothing in handler, step from handler: leave handler (timeout) FAIL: gdb.base/sigstep.exp: continue to handler, si+advance in handler, step from handler: leave handler (timeout) FAIL: gdb.base/sigstep.exp: continue to handler, nothing in handler, next from handler: leave handler (timeout) FAIL: gdb.base/sigstep.exp: continue to handler, si+advance in handler, next from handler: leave handler (timeout) FAIL: gdb.base/sigstep.exp: stepi from handleri: leave signal trampoline FAIL: gdb.base/sigstep.exp: nexti from handleri: leave signal trampoline === gdb Summary === # of expected passes 587 # of unexpected failures 6 This patch adds support for stepping outside of a signal handler on riscv*-*-linux*. Implementation is heavily inspired from mips_linux_syscall_next_pc and surroundings as advised by Pedro Alves. After this patch, all tests in gdb.base/sigstep.exp pass. Build and tested on riscv64-linux-gnu. 2021-07-16 Lancelot SIX gdb/testsuite: Declare that riscv*-*-linux* cannot hardware_single_step Many tests fail in gdb/testsuite/gdb.base/sigstep.exp on riscv64-linux-gnu. Those tests check that when stepping, if the debuggee received a signal it should step inside the signal handler. This feature requires hardware support for single stepping (or at least kernel support), but none are available on riscv*-linux-gnu hosts, at the moment at least. This patch adds RISC-V to the list of configurations that does not have hardware single step capability, disabling tests relying on such feature. Tested on riscv64-linux-gnu. 2021-07-16 Tom Tromey Document quick_symbol_functions::expand_symtabs_matching invariant While working on my series to replace the DWARF psymbol reader, I noticed that the expand_symtabs_matching has an undocumented invariant. I think that, if this invariant is not followed, then GDB will crash. So, this patch documents this in the relevant spots and introduces some asserts to make it clear. Regression tested on x86-64 Fedora 32. 2021-07-16 Tom Tromey Fix array stride bug Investigation of using the Python API with an Ada program showed that an array of dynamic types was not being handled properly. I tracked this down to an oddity of how array strides are handled. In gdb, an array stride can be attached to the range type, via the range_bounds object. However, the stride can also be put into the array's first field. From create_range_type_with_stride: else if (bit_stride > 0) TYPE_FIELD_BITSIZE (result_type, 0) = bit_stride; It's hard to be sure why this is done, but I would guess a combination of historical reasons plus a desire (mentioned in a comment somewhere) to avoid modifying the range type. This patch fixes the problem by changing type::bit_stride to understand this convention. It also fixes one spot that reproduces this logic. Regression tested on x86-64 Fedora 32. 2021-07-16 Giulio Benetti or1k: fix pc-relative relocation against dynamic on PC relative 26 bit relocation. bfd * elf32-or1k.c (or1k_elf_relocate_section): Use a separate entry in switch case R_OR1K_INSN_REL_26 where we need to check for !SYMBOL_CALLS_LOCAL() instead of !SYMBOL_REFERENCES_LOCAL(). 2021-07-16 Nick Clifton Updated Swedish translation for the binutils sub-directory 2021-07-16 GDB Administrator Automatic date update in version.in 2021-07-15 Tom Tromey Avoid expression parsing crash with unknown language PR gdb/28093 points out that gdb crashes when language is set to "unknown" and expression parsing is attempted. At first I thought this was a regression due to the expression rewrite, but it turns out that older versions crash as well. This patch avoids the crash by changing the default expression parser to throw an exception. I think this is preferable -- the current behavior of silently doing nothing does not really make sense. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28093 2021-07-15 Simon Marchi gdb: pass child_ptid and fork kind to target_ops::follow_fork This is a small cleanup I think would be nice, that I spotted while doing the following patch. gdb/ChangeLog: * target.h (struct target_ops) : Add ptid and target_waitkind parameters. (target_follow_fork): Likewise. * target.c (default_follow_fork): Likewise. (target_follow_fork): Likewise. * fbsd-nat.h (class fbsd_nat_target) : Likewise. * fbsd-nat.c (fbsd_nat_target::follow_fork): Likewise. * linux-nat.h (class linux_nat_target) : Likewise. * linux-nat.c (linux_nat_target::follow_fork): Likewise. * obsd-nat.h (class obsd_nat_target) : Likewise. * obsd-nat.c (obsd_nat_target::follow_fork): Likewise. * remote.c (class remote_target) : Likewise. * target-debug.h (target_debug_print_target_waitkind): New. * target-delegates.c: Re-generate. Change-Id: I5421a542f2e19100a22b74cc333d2b235d0de3c8 2021-07-15 Simon Marchi gdb: call post_create_inferior at end of follow_fork_inferior GDB doesn't handle well the case of an inferior using the JIT interface to register JIT-ed objfiles and forking. If an inferior registers a code object using the JIT interface and then forks, the child process conceptually has the same code object loaded, so GDB should look it up and learn about it (it currently doesn't). To achieve this, I think it would make sense to have the inferior_created observable called when an inferior is created due to a fork in follow_fork_inferior. The inferior_created observable is currently called both after starting a new inferior and after attaching to an inferior, allowing various sub-components to learn about that new executing inferior. We can see handling a fork child just like attaching to it, so any work done when attaching should also be done in the case of a fork child. Instead of just calling the inferior_created observable, this patch makes follow_fork_inferior call the whole post_create_inferior function. This way, the attach and follow-fork code code paths are more alike. Given that post_create_inferior calls solib_create_inferior_hook, follow_fork_inferior doesn't need to do it itself, so those calls to solib_create_inferior_hook are removed. One question you may have: why not just call post_create_inferior at the places where solib_create_inferior_hook is currently called, instead of after target_follow_fork? - there's something fishy for the second solib_create_inferior_hook call site: at this point we have switched the current program space to the child's, but not the current inferior nor the current thread. So solib_create_inferior_hook (and everything under, including check_for_thread_db, for example) is called with inferior 1 as the current inferior and inferior 2's program space as the current program space. I think that's wrong, because at this point we are setting up inferior 2, and all that code relies on the current inferior. We could just add a switch_to_thread call before it to make inferior 2 the current one, but there are other problems (see below). - solib_create_inferior_hook is currently not called on the `follow_child && detach_fork` path. I think we need to call it, because we still get a new inferior in that case (even though we detach the parent). If we only call post_create_inferior where solib_create_inferior_hook used to be called, then the JIT subcomponent doesn't get informed about the new inferior, and that introduces a failure in the new gdb.base/jit-elf-fork.exp test. - if we try to put the post_create_inferior just after the switch_to_thread that was originally at line 662, or just before the call to target_follow_fork, we introduce a subtle failure in gdb.threads/fork-thread-pending.exp. What happens then is that libthread_db gets loaded (somewhere under post_create_inferior) before the linux-nat target learns about the LWPs (which happens in linux_nat_target::follow_fork). As a result, the ALL_LWPS loop in try_thread_db_load_1 doesn't see the child LWP, and the thread-db target doesn't have the chance to fill in thread_info::priv. A bit later, when the test does "info threads", and thread_db_target::pid_to_str is called, the thread-db target doesn't recognize the thread as one of its own, and delegates the request to the target below. Because the pid_to_str output is not the expected one, the test fails. This tells me that we need to call the process target's follow_fork first, to make the process target create the necessary LWP and thread structures. Then, we can call post_create_inferior to let the other components of GDB do their thing. But then you may ask: check_for_thread_db is already called today, somewhere under solib_create_inferior_hook, and that is before target_follow_fork, why don't we see this ordering problem!? Well, because of the first bullet point: when check_for_thread_db / thread_db_load are called, the current inferior is (erroneously) inferior 1, the parent. Because libthread_db is already loaded for the parent, thread_db_load early returns. check_for_thread_db later gets called by linux_nat_target::follow_fork. At this point, the current inferior is the correct one and the child's LWP exists, so all is well. Since we now call post_create_inferior after target_follow_fork, which calls the inferior_created observable, which calls check_for_thread_db, I don't think linux_nat_target needs to explicitly call check_for_thread_db itself, so that is removed. In terms of testing, this patch adds a new gdb.base/jit-elf-fork.exp test. It makes an inferior register a JIT code object and then fork. It then verifies that whatever the detach-on-fork and follow-fork-child parameters are, GDB knows about the JIT code object in all the inferiors that survive the fork. It verifies that the inferiors can unload that code object. There isn't currently a way to get visibility into GDB's idea of the JIT code objects for each inferior. For the purpose of this test, add the "maintenance info jit" command. There isn't much we can print about the JIT code objects except their load address. So the output looks a bit bare, but it's good enough for the test. gdb/ChangeLog: * NEWS: Mention "maint info jit" command. * infrun.c (follow_fork_inferior): Don't call solib_create_inferior_hook, call post_create_inferior if a new inferior was created. * jit.c (maint_info_jit_cmd): New. (_initialize_jit): Register new command. * linux-nat.c (linux_nat_target::follow_fork): Don't call check_for_thread_db. * linux-nat.h (check_for_thread_db): Remove declaration. * linux-thread-db.c (check_thread_signals): Make static. gdb/doc/ChangeLog: * gdb.texinfo (Maintenance Commands): Mention "maint info jit". gdb/testsuite/ChangeLog: * gdb.base/jit-elf-fork-main.c: New test. * gdb.base/jit-elf-fork-solib.c: New test. * gdb.base/jit-elf-fork.exp: New test. Change-Id: I9a192e55b8a451c00e88100669283fc9ca60de5c 2021-07-15 Libor Bukata [gdb/procfs.c] Fix build failure in find_stop_signal It fixes a regression caused by commit 1edb66d856c82c389edfd7610143236a68c76846 where thread_info::suspend was made private. The public thread_info API has to be used to get stop signal and avoid build failures. gdb/ChangeLog: 2021-07-14 Libor Bukata * gdb/procfs.c (find_stop_signal): Use thread_info API. Change-Id: I53bc57a05cd0eca5f28ef0726d6faeeb306e7904 2021-07-15 GDB Administrator Automatic date update in version.in 2021-07-14 H.J. Lu x86: Add int1 as one byte opcode 0xf1 Also change the x86 disassembler to disassemble 0xf1 as int1, instead of icebp. gas/ PR gas/28088 * testsuite/gas/i386/opcode.s: Add int1. * testsuite/gas/i386/x86-64-opcode.s: Add int1, int3 and int. * testsuite/gas/i386/opcode-intel.d: Updated. * testsuite/gas/i386/opcode-suffix.d: Likewise. * testsuite/gas/i386/opcode.d: Likewise. * testsuite/gas/i386/x86-64-opcode.d: Likewise. opcodes/ PR gas/28088 * i386-dis.c (dis386): Replace icebp with int1. * i386-opc.tbl: Add int1. * i386-tbl.h: Regenerate. 2021-07-14 Alan Modra gas: default TC_VALIDATE_FIX_SUB to 0 gas/write.c provides a fallback TC_VALIDATE_FIX_SUB define that can be a problem for some targets, the problem being that a non-zero definition of TC_VALIDATE_FIX_SUB says that some uses of fx_subsy are OK, in effect that the target will handle fx_subsy in md_apply_fix and/or tc_gen_reloc. A lot of targets don't have the necessary md_apply_fix and tc_gen_reloc support. So a safer default is to disallow fx_subsy by default. I've had a good look over target usage of fx_subsy, and think I've caught all the cases where targets need TC_VALIDATE_FIX_SUB. Possible failures would be limited to alpha, microblaze, ppc and s390 (the targets that define UNDEFINED_DIFFERENCE_OK), or targets that generate fixups with BFD_RELOC_GPREL32/16 and use a syntax explicitly showing a difference expression. * write.c (TC_VALIDATE_FIX_SUB): Default to 0. * config/tc-hppa.h (TC_VALIDATE_FIX_SUB): Define. * config/tc-microblaze.h (TC_VALIDATE_FIX_SUB): Define. * config/tc-alpha.h (TC_VALIDATE_FIX_SUB): Define for ECOFF. * config/tc-ppc.h (TC_VALIDATE_FIX_SUB): Don't define for ELF. Do define for XCOFF. 2021-07-14 Clément Chigot objdump: add DWARF support for AIX DWARF sections have special names on AIX which need be handled by objdump in order to correctly print them. This patch also adds the correlation in bfd for future uses. bfd/ * libxcoff.h (struct xcoff_dwsect_name): Add DWARF name. * coff-rs6000.c (xcoff_dwsect_names): Update. * coffcode.h (sec_to_styp_flags): Likewise. (coff_new_section_hook): Likewise. binutils/ * dwarf.h (struct dwarf_section): Add XCOFF name. * dwarf.c (struct dwarf_section_display): Update. * objdump.c (load_debug_section): Add XCOFF name handler. (dump_dwarf_section): Likewise. gas/ * config/tc-ppc.c (ppc_change_debug_section): Update to match new name's field. 2021-07-14 Tom de Vries [gdb/testsuite] Fix gdb.base/gold-gdb-index.exp When running test-case gdb.base/gold-gdb-index.exp on openSUSE Tumbleweed, I run into: ... FAIL: gdb.base/gold-gdb-index.exp: maint info symtabs ... This is due to a dummy .gdb_index: ... Contents of the .gdb_index section: Version 7 CU table: TU table: Address table: Symbol table: ... The dummy .gdb_index is ignored when loading the symbols, and instead partial symbols are used. Consequently, we get the same result as if we'd removed -Wl,--gdb-index from the compilation. Presumably, gold fails to generate a proper .gdb_index because it lacks DWARF5 support. Anyway, without a proper .gdb_index we can't test the gdb behaviour we're trying to excercise. Fix this by detecting whether we actually used a .gdb_index for symbol loading. Tested on x86_64-linux. gdb/testsuite/ChangeLog: 2021-07-14 Tom de Vries * lib/gdb.exp (have_index): New proc. * gdb.base/gold-gdb-index.exp: Use have_index. 2021-07-14 Tom de Vries [gdb/testsuite] Add missing skip_tui_tests When building gdb with --disable-tui, we run into: ... (gdb) frame apply all -- -^M Undefined command: "-". Try "help".^M (gdb) ERROR: Undefined command "frame apply all -- -". UNRESOLVED: gdb.base/options.exp: test-frame-apply: frame apply all -- - ... Fix this by detecting whether tui is supported, and skipping the tui-related tests otherwise. Same in some gdb.tui test-cases. Tested on x86_64-linux. gdb/testsuite/ChangeLog: 2021-07-13 Tom de Vries * gdb.base/options.exp: Skip tui-related tests when tui is not supported. * gdb.python/tui-window-disabled.exp: Same. * gdb.python/tui-window.exp: Same. 2021-07-14 GDB Administrator Automatic date update in version.in 2021-07-13 Lancelot SIX Use /bin/sh as shebang in gdb/make-init-c While testing the NixOS[1] packaging for gdb-11.0.90.tar.xz, I got the following error: [...] CXX aarch32-tdep.o CXX gdb.o GEN init.c /nix/store/26a78ync552m8j4sbjavhvkmnqir8c9y-bash-4.4-p23/bin/bash: ./make-init-c: /usr/bin/env: bad interpreter: No such file or directory make[2]: *** [Makefile:1866: stamp-init] Error 126 make[2]: *** Waiting for unfinished jobs.... make[2]: Leaving directory '/build/gdb-11.0.90/gdb' make[1]: *** [Makefile:9814: all-gdb] Error 2 make[1]: Leaving directory '/build/gdb-11.0.90' make: *** [Makefile:903: all] Error 2 builder for '/nix/store/xs8my3rrc3l4kdlbpx0azh6q0v0jxphr-gdb-gdb-11.0.90.drv' failed with exit code 2 error: build of '/nix/store/xs8my3rrc3l4kdlbpx0azh6q0v0jxphr-gdb-gdb-11.0.90.drv' failed In the nix build environment, /usr/bin/env is not present, only /bin/sh is. This patch makes sure that gdb/make-init-c uses '/bin/sh' as interpreter as this is the only one available on this platform. I do not think this change will cause regressions on any other configuration. [1] https://nixos.org/ gdb/Changelog * make-init-c: Use /bin/sh as shebang. 2021-07-13 John Baldwin arm-fbsd-nat: Use fetch_register_set and store_register_set. aarch64-fbsd-nat: Use fetch_register_set and store_register_set. riscv-fbsd-nat: Use fetch_register_set and store_register_set. fbsd-nat: Add helper functions to fetch and store register sets. In particular, this supports register sets described by a regcache_map which are fetched and stored with dedicated ptrace operations. These functions are intended to be used in architecture-specific fetch_registers and store_registers target methods. Add regcache_map_supplies helper routine. This helper can be used in the fetch_registers and store_registers target methods to determine if a register set includes a specific register. 2021-07-13 Pedro Alves Avoid letting exceptions escape gdb_bfd_iovec_fileio_close (PR gdb/28080) Before PR gdb/28080 was fixed by the previous patch, GDB was crashing like this: (gdb) detach Detaching from program: target:/any/program, process 3671843 Detaching from process 3671843 Ending remote debugging. [Inferior 1 (process 3671843) detached] In main terminate called after throwing an instance of 'gdb_exception_error' Aborted (core dumped) Here's the exception above being thrown: (top-gdb) bt #0 throw_error (error=TARGET_CLOSE_ERROR, fmt=0x555556035588 "Remote connection closed") at src/gdbsupport/common-exceptions.cc:222 #1 0x0000555555bbaa46 in remote_target::readchar (this=0x555556a11040, timeout=10000) at src/gdb/remote.c:9440 #2 0x0000555555bbb9e5 in remote_target::getpkt_or_notif_sane_1 (this=0x555556a11040, buf=0x555556a11058, forever=0, expecting_notif=0, is_notif=0x0) at src/gdb/remote.c:9928 #3 0x0000555555bbbda9 in remote_target::getpkt_sane (this=0x555556a11040, buf=0x555556a11058, forever=0) at src/gdb/remote.c:10030 #4 0x0000555555bc0e75 in remote_target::remote_hostio_send_command (this=0x555556a11040, command_bytes=13, which_packet=14, remote_errno=0x7fffffffcfd0, attachment=0x0, attachment_len=0x0) at src/gdb/remote.c:12137 #5 0x0000555555bc1b6c in remote_target::remote_hostio_close (this=0x555556a11040, fd=8, remote_errno=0x7fffffffcfd0) at src/gdb/remote.c:12455 #6 0x0000555555bc1bb4 in remote_target::fileio_close (During symbol reading: .debug_line address at offset 0x64f417 is 0 [in module build/gdb/gdb] this=0x555556a11040, fd=8, remote_errno=0x7fffffffcfd0) at src/gdb/remote.c:12462 #7 0x0000555555c9274c in target_fileio_close (fd=3, target_errno=0x7fffffffcfd0) at src/gdb/target.c:3365 #8 0x000055555595a19d in gdb_bfd_iovec_fileio_close (abfd=0x555556b9f8a0, stream=0x555556b11530) at src/gdb/gdb_bfd.c:439 #9 0x0000555555e09e3f in opncls_bclose (abfd=0x555556b9f8a0) at src/bfd/opncls.c:599 #10 0x0000555555e0a2c7 in bfd_close_all_done (abfd=0x555556b9f8a0) at src/bfd/opncls.c:847 #11 0x0000555555e0a27a in bfd_close (abfd=0x555556b9f8a0) at src/bfd/opncls.c:814 #12 0x000055555595a9d3 in gdb_bfd_close_or_warn (abfd=0x555556b9f8a0) at src/gdb/gdb_bfd.c:626 #13 0x000055555595ad29 in gdb_bfd_unref (abfd=0x555556b9f8a0) at src/gdb/gdb_bfd.c:715 #14 0x0000555555ae4730 in objfile::~objfile (this=0x555556515540, __in_chrg=) at src/gdb/objfiles.c:573 #15 0x0000555555ae955a in std::_Sp_counted_ptr::_M_dispose (this=0x555556c20db0) at /usr/include/c++/9/bits/shared_ptr_base.h:377 #16 0x000055555572b7c8 in std::_Sp_counted_base<(__gnu_cxx::_Lock_policy)2>::_M_release (this=0x555556c20db0) at /usr/include/c++/9/bits/shared_ptr_base.h:155 #17 0x00005555557263c3 in std::__shared_count<(__gnu_cxx::_Lock_policy)2>::~__shared_count (this=0x555556bf0588, __in_chrg=) at /usr/include/c++/9/bits/shared_ptr_base.h:730 #18 0x0000555555ae745e in std::__shared_ptr::~__shared_ptr (this=0x555556bf0580, __in_chrg=) at /usr/include/c++/9/bits/shared_ptr_base.h:1169 #19 0x0000555555ae747e in std::shared_ptr::~shared_ptr (this=0x555556bf0580, __in_chrg=) at /usr/include/c++/9/bits/shared_ptr.h:103 #20 0x0000555555b1c1dc in __gnu_cxx::new_allocator > >::destroy > (this=0x5555564cdd60, __p=0x555556bf0580) at /usr/include/c++/9/ext/new_allocator.h:153 #21 0x0000555555b1bb1d in std::allocator_traits > > >::destroy > (__a=..., __p=0x555556bf0580) at /usr/include/c++/9/bits/alloc_traits.h:497 #22 0x0000555555b1b73e in std::__cxx11::list, std::allocator > >::_M_erase (this=0x5555564cdd60, __position=std::shared_ptr (expired, weak count 1) = {get() = 0x555556515540}) at /usr/include/c++/9/bits/stl_list.h:1921 #23 0x0000555555b1afeb in std::__cxx11::list, std::allocator > >::erase (this=0x5555564cdd60, __position=std::shared_ptr (expired, weak count 1) = {get() = 0x555556515540}) at /usr/include/c++/9/bits/list.tcc:158 #24 0x0000555555b19576 in program_space::remove_objfile (this=0x5555564cdd20, objfile=0x555556515540) at src/gdb/progspace.c:210 #25 0x0000555555ae4502 in objfile::unlink (this=0x555556515540) at src/gdb/objfiles.c:487 #26 0x0000555555ae5a12 in objfile_purge_solibs () at src/gdb/objfiles.c:875 #27 0x0000555555c09686 in no_shared_libraries (ignored=0x0, from_tty=1) at src/gdb/solib.c:1236 #28 0x00005555559e3f5f in detach_command (args=0x0, from_tty=1) at src/gdb/infcmd.c:2769 Note frame #14: #14 0x0000555555ae4730 in objfile::~objfile (this=0x555556515540, __in_chrg=) at src/gdb/objfiles.c:573 That's a dtor, thus noexcept. That's the reason for the std::terminate. The previous patch fixed things such that the exception above isn't thrown anymore. However, it's possible that e.g., the remote connection drops just while a user types "nosharedlibrary", or some other reason that leads to objfile::~objfile, and then we end up the same std::terminate problem. Also notice that frames #9-#11 are BFD frames: #9 0x0000555555e09e3f in opncls_bclose (abfd=0x555556bc27e0) at src/bfd/opncls.c:599 #10 0x0000555555e0a2c7 in bfd_close_all_done (abfd=0x555556bc27e0) at src/bfd/opncls.c:847 #11 0x0000555555e0a27a in bfd_close (abfd=0x555556bc27e0) at src/bfd/opncls.c:814 BFD is written in C and thus throwing exceptions over such frames may either not clean up properly, or, may abort if bfd is not compiled with -fasynchronous-unwind-tables (x86-64 defaults that on, but not all GCC ports do). Thus frame #8 seems like a good place to swallow exceptions. More so since in this spot we already ignore target_fileio_close return errors. That's what this commit does. Without the previous fix, we'd see: (gdb) detach Detaching from program: target:/any/program, process 2197701 Ending remote debugging. [Inferior 1 (process 2197701) detached] warning: cannot close "target:/lib64/ld-linux-x86-64.so.2": Remote connection closed Note it prints a warning, which would still be a regression compared to GDB 10, if it weren't for the previous fix. gdb/ChangeLog: yyyy-mm-dd Pedro Alves PR gdb/28080 * gdb_bfd.c (gdb_bfd_close_warning): New. (gdb_bfd_iovec_fileio_close): Wrap target_fileio_close in try/catch and print warning on exception. (gdb_bfd_close_or_warn): Use gdb_bfd_close_warning. Change-Id: Ic7a26ddba0a4444e3377b0e7c1c89934a84545d7 2021-07-13 Pedro Alves Fix detach with target remote (PR gdb/28080) Commit 408f66864a1a823591b26420410c982174c239a2 ("detach in all-stop with threads running") regressed "detach" with "target remote": (gdb) detach Detaching from program: target:/any/program, process 3671843 Detaching from process 3671843 Ending remote debugging. [Inferior 1 (process 3671843) detached] In main terminate called after throwing an instance of 'gdb_exception_error' Aborted (core dumped) Here's the exception above being thrown: (top-gdb) bt #0 throw_error (error=TARGET_CLOSE_ERROR, fmt=0x555556035588 "Remote connection closed") at src/gdbsupport/common-exceptions.cc:222 #1 0x0000555555bbaa46 in remote_target::readchar (this=0x555556a11040, timeout=10000) at src/gdb/remote.c:9440 #2 0x0000555555bbb9e5 in remote_target::getpkt_or_notif_sane_1 (this=0x555556a11040, buf=0x555556a11058, forever=0, expecting_notif=0, is_notif=0x0) at src/gdb/remote.c:9928 #3 0x0000555555bbbda9 in remote_target::getpkt_sane (this=0x555556a11040, buf=0x555556a11058, forever=0) at src/gdb/remote.c:10030 #4 0x0000555555bc0e75 in remote_target::remote_hostio_send_command (this=0x555556a11040, command_bytes=13, which_packet=14, remote_errno=0x7fffffffcfd0, attachment=0x0, attachment_len=0x0) at src/gdb/remote.c:12137 #5 0x0000555555bc1b6c in remote_target::remote_hostio_close (this=0x555556a11040, fd=8, remote_errno=0x7fffffffcfd0) at src/gdb/remote.c:12455 #6 0x0000555555bc1bb4 in remote_target::fileio_close (During symbol reading: .debug_line address at offset 0x64f417 is 0 [in module build/gdb/gdb] this=0x555556a11040, fd=8, remote_errno=0x7fffffffcfd0) at src/gdb/remote.c:12462 #7 0x0000555555c9274c in target_fileio_close (fd=3, target_errno=0x7fffffffcfd0) at src/gdb/target.c:3365 #8 0x000055555595a19d in gdb_bfd_iovec_fileio_close (abfd=0x555556b9f8a0, stream=0x555556b11530) at src/gdb/gdb_bfd.c:439 #9 0x0000555555e09e3f in opncls_bclose (abfd=0x555556b9f8a0) at src/bfd/opncls.c:599 #10 0x0000555555e0a2c7 in bfd_close_all_done (abfd=0x555556b9f8a0) at src/bfd/opncls.c:847 #11 0x0000555555e0a27a in bfd_close (abfd=0x555556b9f8a0) at src/bfd/opncls.c:814 #12 0x000055555595a9d3 in gdb_bfd_close_or_warn (abfd=0x555556b9f8a0) at src/gdb/gdb_bfd.c:626 #13 0x000055555595ad29 in gdb_bfd_unref (abfd=0x555556b9f8a0) at src/gdb/gdb_bfd.c:715 #14 0x0000555555ae4730 in objfile::~objfile (this=0x555556515540, __in_chrg=) at src/gdb/objfiles.c:573 #15 0x0000555555ae955a in std::_Sp_counted_ptr::_M_dispose (this=0x555556c20db0) at /usr/include/c++/9/bits/shared_ptr_base.h:377 #16 0x000055555572b7c8 in std::_Sp_counted_base<(__gnu_cxx::_Lock_policy)2>::_M_release (this=0x555556c20db0) at /usr/include/c++/9/bits/shared_ptr_base.h:155 #17 0x00005555557263c3 in std::__shared_count<(__gnu_cxx::_Lock_policy)2>::~__shared_count (this=0x555556bf0588, __in_chrg=) at /usr/include/c++/9/bits/shared_ptr_base.h:730 #18 0x0000555555ae745e in std::__shared_ptr::~__shared_ptr (this=0x555556bf0580, __in_chrg=) at /usr/include/c++/9/bits/shared_ptr_base.h:1169 #19 0x0000555555ae747e in std::shared_ptr::~shared_ptr (this=0x555556bf0580, __in_chrg=) at /usr/include/c++/9/bits/shared_ptr.h:103 #20 0x0000555555b1c1dc in __gnu_cxx::new_allocator > >::destroy > (this=0x5555564cdd60, __p=0x555556bf0580) at /usr/include/c++/9/ext/new_allocator.h:153 #21 0x0000555555b1bb1d in std::allocator_traits > > >::destroy > (__a=..., __p=0x555556bf0580) at /usr/include/c++/9/bits/alloc_traits.h:497 #22 0x0000555555b1b73e in std::__cxx11::list, std::allocator > >::_M_erase (this=0x5555564cdd60, __position=std::shared_ptr (expired, weak count 1) = {get() = 0x555556515540}) at /usr/include/c++/9/bits/stl_list.h:1921 #23 0x0000555555b1afeb in std::__cxx11::list, std::allocator > >::erase (this=0x5555564cdd60, __position=std::shared_ptr (expired, weak count 1) = {get() = 0x555556515540}) at /usr/include/c++/9/bits/list.tcc:158 #24 0x0000555555b19576 in program_space::remove_objfile (this=0x5555564cdd20, objfile=0x555556515540) at src/gdb/progspace.c:210 #25 0x0000555555ae4502 in objfile::unlink (this=0x555556515540) at src/gdb/objfiles.c:487 #26 0x0000555555ae5a12 in objfile_purge_solibs () at src/gdb/objfiles.c:875 #27 0x0000555555c09686 in no_shared_libraries (ignored=0x0, from_tty=1) at src/gdb/solib.c:1236 #28 0x00005555559e3f5f in detach_command (args=0x0, from_tty=1) at src/gdb/infcmd.c:2769 So frame #28 already detached the remote process, and then we're purging the shared libraries. GDB had opened remote shared libraries via the target: sysroot, so it tries closing them. GDBserver is tearing down already, so remote communication breaks down and we close the remote target and throw TARGET_CLOSE_ERROR. Note frame #14: #14 0x0000555555ae4730 in objfile::~objfile (this=0x555556515540, __in_chrg=) at src/gdb/objfiles.c:573 That's a dtor, thus noexcept. That's the reason for the std::terminate. Stepping back a bit, why do we still have open remote files if we've managed to detach already, and, we're debugging with "target remote"? The reason is that commit 408f66864a1a823591b26420410c982174c239a2 makes detach_command hold a reference to the target, so the remote target won't be finally closed until frame #28 returns. It's closing the target that invalidates target file I/O handles. This commit fixes the issue by not relying on target_close to invalidate the target file I/O handles, instead invalidate them immediately in remote_unpush_target. So when GDB purges the solibs, and we end up in target_fileio_close (frame #7 above), there's nothing to do, and we don't try to talk with the remote target anymore. The regression isn't seen when testing with --target_board=native-gdbserver, because that does "set sysroot" to disable the "target:" sysroot, for test run speed reasons. So this commit adds a testcase that explicitly tests detach with "set sysroot target:". gdb/ChangeLog: yyyy-mm-dd Pedro Alves PR gdb/28080 * remote.c (remote_unpush_target): Invalidate file I/O target handles. * target.c (fileio_handles_invalidate_target): Make extern. * target.h (fileio_handles_invalidate_target): Declare. gdb/testsuite/ChangeLog: yyyy-mm-dd Pedro Alves PR gdb/28080 * gdb.base/detach-sysroot-target.exp: New. * gdb.base/detach-sysroot-target.c: New. Reported-By: Jonah Graham Change-Id: I851234910172f42a1b30e731161376c344d2727d 2021-07-13 Tom de Vries [gdb/testsuite] Fix check-libthread-db.exp FAILs with glibc 2.33 When running test-case gdb.threads/check-libthread-db.exp on openSUSE Tumbleweed with glibc 2.33, I get: ... (gdb) maint check libthread-db^M Running libthread_db integrity checks:^M Got thread 0x7ffff7c79b80 => 9354 => 0x7ffff7c79b80; errno = 0 ... OK^M libthread_db integrity checks passed.^M (gdb) FAIL: gdb.threads/check-libthread-db.exp: user-initiated check: \ libpthread.so not initialized (pattern 2) ... The test-case expects instead: ... Got thread 0x0 => 9354 => 0x0 ... OK^M ... which is what I get on openSUSE Leap 15.2 with glibc 2.26, and what is described in the test-case like this: ... # libthread_db should fake a single thread with th_unique == NULL. ... Using a breakpoint on check_thread_db_callback we can compare the two scenarios, and find that in the latter case we hit this code in glibc function iterate_thread_list in nptl_db/td_ta_thr_iter.c: ... if (next == 0 && fake_empty) { /* __pthread_initialize_minimal has not run. There is just the main thread to return. We cannot rely on its thread register. They sometimes contain garbage that would confuse us, left by the kernel at exec. So if it looks like initialization is incomplete, we only fake a special descriptor for the initial thread. */ td_thrhandle_t th = { ta, 0 }; return callback (&th, cbdata_p) != 0 ? TD_DBERR : TD_OK; } ... while in the former case we don't because this preceding statement doesn't result in next == 0: ... err = DB_GET_FIELD (next, ta, head, list_t, next, 0); ... Note that the comment mentions __pthread_initialize_minimal, but in both cases it has already run before we hit the callback, so it's possible the comment is no longer accurate. The change in behaviour bisect to glibc commit 1daccf403b "nptl: Move stack list variables into _rtld_global", which moves the initialization of stack list variables such as __stack_user to an earlier moment, which explains well enough the observed difference. Fix this by updating the regexp patterns to agree with what libthread-db is telling us. Tested on x86_64-linux, both with glibc 2.33 and 2.26. gdb/testsuite/ChangeLog: 2021-07-07 Tom de Vries PR testsuite/27690 * gdb.threads/check-libthread-db.exp: Update patterns for glibc 2.33. 2021-07-13 Felix Willgerodt gdb, dwarf: Don't follow the parent of a subprogram to get a prefix. During prefix resolution, if the parent is a subprogram, there is no need to go to the parent of the subprogram. The DIE will be local. For a program like: ~~~ class F1 { public: int a; int vvv () { class F2 { int f; }; F2 abcd; return 1; } }; ~~~ The class F2 should not be seen as a member of F1. Before: ~~~ (gdb) ptype abcd type = class F1::F2 { private: int f; } ~~~ After: ~~~ (gdb) ptype abcd type = class F2 { private: int f; } ~~~ gdb/ChangeLog: 2021-06-23 Felix Willgerodt * dwarf2/read.c (determine_prefix): Return an empty prefix if the parent is a subprogram. gdb/testsuite/ChangeLog: 2021-06-23 Felix Willgerodt * gdb.cp/nested-class-func-class.cc: New file. * gdb.cp/nested-class-func-class.exp: New file. 2021-07-13 Simon Marchi gdb: disable commit-resumed on -exec-interrupt --thread-group As reported in PR gdb/28077, we hit an internal error when using -exec-interrupt with --thread-group: info threads &"info threads\n" ~" Id Target Id Frame \n" ~"* 1 process 403312 \"loop\" (running)\n" ^done (gdb) -exec-interrupt --thread-group i1 ~"/home/simark/src/binutils-gdb/gdb/target.c:3768: internal-error: void target_stop(ptid_t): Assertion `!proc_target->commit_resumed_state' failed.\nA problem internal to GDB has been detected,\nfurther debugging may prove unreliable.\nQuit this debugging session? (y or n) " This is because this code path never disables commit-resumed (a requirement for calling target_stop, as documented in process_stratum_target::»commit_resumed_state) before calling target_stop. The other 3 code paths in mi_cmd_exec_interrupt use interrupt_target_1, which does it. But the --thread-group code path uses its own thing which doesn't do it. Fix this by adding a scoped_disable_commit_resumed in this code path. Calling -exec-interrupt with --thread-group is apparently not tested at the moment (which is why this bug could creep in). Add a new test for that. The test runs two inferiors and tries to interrupt them with "-exec-interrupt --thread-group X". This will need to be merged in the gdb-11-branch, so here are ChangeLog entries: gdb/ChangeLog: * mi/mi-main.c (mi_cmd_exec_interrupt): Use scoped_disable_commit_resumed in the --thread-group case. gdb/testsuite/ChangeLog: * gdb.mi/interrupt-thread-group.c: New. * gdb.mi/interrupt-thread-group.exp: New. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28077 Change-Id: I615efefcbcaf2c15d47caf5e4b9d82854b2a2fcb 2021-07-13 Nelson Chu RISC-V: Enable elf attributes when default configure option isn't set. Since gcc commit, 3c70b3ca1ef58f302bf8c16d9e7c7bb8626408bf, we now enable elf attributes for all riscv targets by default in gcc. Therefore, I think binutils should have the same behavior, in case users are writing assembly files. If --enable-default-riscv-attribute isn't set, then we enable the elf attributes for all riscv targets by default. ChangLog: binutils/ * testsuite/binutils-all/readelf.s: Add comments for riscv. * testsuite/binutils-all/readelf.s-64: Likewise. * testsuite/binutils-all/readelf.s-64-unused: Likewise. * testsuite/binutils-all/readelf.ss: Likewise. * testsuite/binutils-all/readelf.ss-64: Likewise. * testsuite/binutils-all/readelf.ss-64-unused: Likewise. gas/ * configure.ac: If --enable-default-riscv-attribute isn't set, then we enable the elf attributes for all riscv targets by default. * configure: Regenerated. 2021-07-13 John Ericson Fix some dangling references to `netbsd-tdep` These files were renamed in 1b71cfcfdc3e13a655fefa6566b5564cec044c10, but evidentially a few dangling references were left behind. This causes builds to fail: $ ./configure --target i686-netbsdelf $ make make: *** No rule to make target 'nbsd-tdep.c', needed by 'nbsd-tdep.o'. Stop. 2021-07-13 Simon Marchi gdb: optimize all_matching_threads_iterator all_matching_threads_iterator is used extensively in some pretty fast paths, often under the all_non_exited_threads function. If a filter target and thread-specific ptid are given, it iterates on all threads of all inferiors of that target, to ultimately yield exactly on thread. And this happens quite often, which means we unnecessarily spend time iterating on threads to find the one we are looking for. The same thing happens if an inferior-specific ptid is given, although there the iterator yields all the threads of that inferior. In those cases, the callers of all_non_exited_threads could have different behaviors depending on the kind of ptid, to avoid this inefficiency, but that would be very tedious. Using all_non_exited_threads has the advantage that one simple implementation can work seamlessly on multiple threads or on one specific thread, just by playing with the ptid. Instead, optimize all_matching_threads_iterator directly to detect these different cases and limiting what we iterate on to just what we need. - if filter_ptid is minus_one_ptid, do as we do now: filter inferiors based on filter_target, iterate on all of the matching inferiors' threads - if filter_ptid is a pid-only ptid (then a filter_target must necessarily be given), look up that inferior and iterate on all its threads - otherwise, filter_ptid is a thread-specific ptid, so look up that specific thread and "iterate" only on it For the last case, what was an iteration on all threads of the filter target now becomes a call to find_thread_ptid, which is quite efficient now thanks to inferior::ptid_thread_map. gdb/ChangeLog: * thread-iter.h (class all_matching_threads_iterator) : Use default. : New. : Initialize. : Remove. * thread-iter.c (all_matching_threads_iterator::m_inf_matches): Don't filter on m_filter_ptid. (all_matching_threads_iterator::all_matching_threads_iterator): Choose path based on filter_ptid (all threads, all threads of inferior, single thread). (all_matching_threads_iterator::advance): Likewise. Change-Id: Ic6a19845f5f760fa1b8eac8145793c0ff431bbc9 2021-07-13 Simon Marchi gdb: maintain ptid -> thread map, optimize find_thread_ptid When debugging a large number of threads (thousands), looking up a thread by ptid_t using the inferior::thread_list linked list can add up. Add inferior::thread_map, an std::unordered_map indexed by ptid_t, and change the find_thread_ptid function to look up a thread using std::unordered_map::find, instead of iterating on all of the inferior's threads. This should make it faster to look up a thread from its ptid. Change-Id: I3a8da0a839e18dee5bb98b8b7dbeb7f3dfa8ae1c Co-Authored-By: Pedro Alves 2021-07-13 Simon Marchi gdb: optimize selection of resumed thread with pending event Consider a case where many threads (thousands) keep hitting a breakpoint whose condition evaluates to false. random_pending_event_thread is responsible for selecting a thread from an inferior among all that are resumed with a pending wait status. It is currently implemented by walking the inferior's thread list twice: once to count the number of candidates and once to select a random one. Since we now maintain a per target list of resumed threads with pending event, we can implement this more efficiently by walking that list and selecting the first thread that matches the criteria (random_pending_event_thread looks for an thread from a specific inferior, and possibly a filter ptid). It will be faster especially in the common case where there isn't any resumed thread with pending event. Currently, we have to iterate the thread list to figure this out. With this patch, the list of resumed threads with pending event will be empty, so it's quick to figure out. The random selection is kept, but is moved to process_stratum_target::random_resumed_with_pending_wait_status. The same technique is used: do a first pass to count the number of candidates, and do a second pass to select a random one. But given that the list of resumed threads with pending wait statuses will generally be short, or at least shorter than the full thread list, it should be quicker. Note that this isn't completely true, in case there are multiple inferiors on the same target. Imagine that inferior A has 10k resumed threads with pending wait statuses, and random_pending_event_thread is called with inferior B. We'll need to go through the list that contains inferior A's threads to realize that inferior B has no resumed threads with pending wait status. But I think that this is a corner / pathological case. And a possible fix for this situation would be to make random_pending_event_thread work per-process-target, rather than per-inferior. Change-Id: I1b71d01beaa500a148b5b9797745103e13917325 2021-07-13 Simon Marchi gdb: optimize check for resumed threads with pending wait status in maybe_set_commit_resumed_all_targets Consider a test case where many threads (thousands) keep hitting a breakpoint whose condition evaluates to false. maybe_set_commit_resumed_all_targets is called at each handled event, when the scoped_disable_commit_resumed object in fetch_inferior_event is reset_and_commit-ed. One particularly expensive check in there is whether the target has at least one resumed thread with a pending wait status (in which case, we don't want to commit the resumed threads, as we want to consume this status first). It is currently implemented as walking all threads of the target. Since we now maintain a per-target list of resumed threads with pending status, we can do this check efficiently, by checking whether that list is empty or not. Add the process_stratum_target::has_resumed_with_pending_wait_status method for this, and use it in maybe_set_commit_resumed_all_targets. Change-Id: Ia1595baa1b358338f94fc3cb3af7f27092dad5b6 2021-07-13 Simon Marchi gdb: maintain per-process-target list of resumed threads with pending wait status Looking up threads that are both resumed and have a pending wait status to report is something that we do quite often in the fast path and is expensive if there are many threads, since it currently requires walking whole thread lists. The first instance is in maybe_set_commit_resumed_all_targets. This is called after handling each event in fetch_inferior_event, to see if we should ask targets to commit their resumed threads or not. If at least one thread is resumed but has a pending wait status, we don't ask the targets to commit their resumed threads, because we want to consume and handle the pending wait status first. The second instance is in random_pending_event_thread, where we want to select a random thread among all those that are resumed and have a pending wait status. This is called every time we try to consume events, to see if there are any pending events that we we want to consume, before asking the targets for more events. To allow optimizing these cases, maintain a per-process-target list of threads that are resumed and have a pending wait status. In maybe_set_commit_resumed_all_targets, we'll be able to check in O(1) if there are any such threads simply by checking whether the list is empty. In random_pending_event_thread, we'll be able to use that list, which will be quicker than iterating the list of threads, especially when there are no resumed with pending wait status threads. About implementation details: using the new setters on class thread_info, it's relatively easy to maintain that list. Any time the "resumed" or "pending wait status" property is changed, we check whether that should cause the thread to be added or removed from the list. In set_thread_exited, we try to remove the thread from the list, because keeping an exited thread in that list would make no sense (especially if the thread is freed). My first implementation assumed that a process stratum target was always present when set_thread_exited is called. That's however, not the case: in some cases, targets unpush themselves from an inferior and then call "exit_inferior", which exits all the threads. If the target is unpushed before set_thread_exited is called on the threads, it means we could mistakenly leave some threads in the list. I tried to see how hard it would be to make it such that targets have to exit all threads before unpushing themselves from the inferior (that would seem logical to me, we don't want threads belonging to an inferior that has no process target). That seemed quite difficult and not worth the time at the moment. Instead, I changed inferior::unpush_target to remove all threads of that inferior from the list. As of this patch, the list is not used, this is done in the subsequent patches. The debug messages in process-stratum-target.c need to print some ptids. However, they can't use target_pid_to_str to print them without introducing a dependency on the current inferior (the current inferior is used to get the current target stack). For debug messages, I find it clearer to print the spelled out ptid anyway (the pid, lwp and tid values). Add a ptid_t::to_string method that returns a string representation of the ptid that is meant for debug messages, a bit like we already have frame_id::to_string. Change-Id: Iad8f93db2d13984dd5aa5867db940ed1169dbb67 2021-07-13 Simon Marchi gdb: make thread_info::suspend private, add getters / setters A following patch will want to take some action when a pending wait status is set on or removed from a thread. Add a getter and a setter on thread_info for the pending waitstatus, so that we can add some code in the setter later. The thing is, the pending wait status field is in the thread_suspend_state, along with other fields that we need to backup before and restore after the thread does an inferior function call. Therefore, make the thread_suspend_state member private (thread_info::suspend becomes thread_info::m_suspend), and add getters / setters for all of its fields: - pending wait status - stop signal - stop reason - stop pc For the pending wait status, add the additional has_pending_waitstatus and clear_pending_waitstatus methods. I think this makes the thread_info interface a bit nicer, because we now access the fields as: thread->stop_pc () rather than thread->suspend.stop_pc The stop_pc field being in the `suspend` structure is an implementation detail of thread_info that callers don't need to be aware of. For the backup / restore of the thread_suspend_state structure, add save_suspend_to and restore_suspend_from methods. You might wonder why `save_suspend_to`, as opposed to a simple getter like thread_suspend_state &suspend (); I want to make it clear that this is to be used only for backing up and restoring the suspend state, _not_ to access fields like: thread->suspend ()->stop_pc Adding some getters / setters allows adding some assertions. I find that this helps understand how things are supposed to work. Add: - When getting the pending status (pending_waitstatus method), ensure that there is a pending status. - When setting a pending status (set_pending_waitstatus method), ensure there is no pending status. There is one case I found where this wasn't true - in remote_target::process_initial_stop_replies - which needed adjustments to respect that contract. I think it's because process_initial_stop_replies is kind of (ab)using the thread_info::suspend::waitstatus to store some statuses temporarily, for its internal use (statuses it doesn't intent on leaving pending). process_initial_stop_replies pulls out stop replies received during the initial connection using target_wait. It always stores the received event in `evthread->suspend.waitstatus`. But it only sets waitstatus_pending_p, if it deems the event interesting enough to leave pending, to be reported to the core: if (ws.kind != TARGET_WAITKIND_STOPPED || ws.value.sig != GDB_SIGNAL_0) evthread->suspend.waitstatus_pending_p = 1; It later uses this flag a bit below, to choose which thread to make the "selected" one: if (selected == NULL && thread->suspend.waitstatus_pending_p) selected = thread; And ultimately that's used if the user-visible mode is all-stop, so that we print the stop for that interesting thread: /* In all-stop, we only print the status of one thread, and leave others with their status pending. */ if (!non_stop) { thread_info *thread = selected; if (thread == NULL) thread = lowest_stopped; if (thread == NULL) thread = first; print_one_stopped_thread (thread); } But in any case (all-stop or non-stop), print_one_stopped_thread needs to access the waitstatus value of these threads that don't have a pending waitstatus (those that had TARGET_WAITKIND_STOPPED + GDB_SIGNAL_0). This doesn't work with the assertions I've put. So, change the code to only set the thread's wait status if it is an interesting one that we are going to leave pending. If the thread stopped due to a non-interesting event (TARGET_WAITKIND_STOPPED + GDB_SIGNAL_0), don't store it. Adjust print_one_stopped_thread to understand that if a thread has no pending waitstatus, it's because it stopped with TARGET_WAITKIND_STOPPED + GDB_SIGNAL_0. The call to set_last_target_status also uses the pending waitstatus. However, given that the pending waitstatus for the thread may have been cleared in print_one_stopped_thread (and that there might not even be a pending waitstatus in the first place, as explained above), it is no longer possible to do it at this point. To fix that, move the call to set_last_target_status in print_one_stopped_thread. I think this will preserve the existing behavior, because set_last_target_status is currently using the current thread's wait status. And the current thread is the last one for which print_one_stopped_thread is called. So by calling set_last_target_status in print_one_stopped_thread, we'll get the same result. set_last_target_status will possibly be called multiple times, but only the last call will matter. It just means possibly more calls to set_last_target_status, but those are cheap. Change-Id: Iedab9653238eaf8231abcf0baa20145acc8b77a7 2021-07-13 Simon Marchi gdb: add setter / getter for thread_info resumed state A following patch will want to do things when a thread's resumed state changes. Make the `resumed` field private (renamed to `m_resumed`) and add a getter and a setter for it. The following patch in question will therefore be able to add some code to the setter. Change-Id: I360c48cc55a036503174313261ce4e757d795319 2021-07-13 Simon Marchi gdb: use intrusive list for step-over chain The threads that need a step-over are currently linked using an hand-written intrusive doubly-linked list, so that seems a very good candidate for intrusive_list, convert it. For this, we have a use case of appending a list to another one (in start_step_over). Based on the std::list and Boost APIs, add a splice method. However, only support splicing the other list at the end of the `this` list, since that's all we need. Add explicit default assignment operators to reference_to_pointer_iterator, which are otherwise implicitly deleted. This is needed because to define thread_step_over_list_safe_iterator, we wrap reference_to_pointer_iterator inside a basic_safe_iterator, and basic_safe_iterator needs to be able to copy-assign the wrapped iterator. The move-assignment operator is therefore not needed, only the copy-assignment operator is. But for completeness, add both. Change-Id: I31b2ff67c7b78251314646b31887ef1dfebe510c 2021-07-13 Pedro Alves gdb: make inferior_list use intrusive_list Change inferior_list, the global list of inferiors, to use intrusive_list. I think most other changes are somewhat obvious fallouts from this change. There is a small change in behavior in scoped_mock_context. Before this patch, constructing a scoped_mock_context would replace the whole inferior list with only the new mock inferior. Tests using two scoped_mock_contexts therefore needed to manually link the two inferiors together, as the second scoped_mock_context would bump the first mock inferior from the thread list. With this patch, a scoped_mock_context adds its mock inferior to the inferior list on construction, and removes it on destruction. This means that tests run with mock inferiors in the inferior list in addition to any pre-existing inferiors (there is always at least one). There is no possible pid clash problem, since each scoped mock inferior uses its own process target, and pids are per process target. Co-Authored-By: Simon Marchi Change-Id: I7eb6a8f867d4dcf8b8cd2dcffd118f7270756018 2021-07-13 Pedro Alves gdb: introduce intrusive_list, make thread_info use it GDB currently has several objects that are put in a singly linked list, by having the object's type have a "next" pointer directly. For example, struct thread_info and struct inferior. Because these are simply-linked lists, and we don't keep track of a "tail" pointer, when we want to append a new element on the list, we need to walk the whole list to find the current tail. It would be nice to get rid of that walk. Removing elements from such lists also requires a walk, to find the "previous" position relative to the element being removed. To eliminate the need for that walk, we could make those lists doubly-linked, by adding a "prev" pointer alongside "next". It would be nice to avoid the boilerplate associated with maintaining such a list manually, though. That is what the new intrusive_list type addresses. With an intrusive list, it's also possible to move items out of the list without destroying them, which is interesting in our case for example for threads, when we exit them, but can't destroy them immediately. We currently keep exited threads on the thread list, but we could change that which would simplify some things. Note that with std::list, element removal is O(N). I.e., with std::list, we need to walk the list to find the iterator pointing to the position to remove. However, we could store a list iterator inside the object as soon as we put the object in the list, to address it, because std::list iterators are not invalidated when other elements are added/removed. However, if you need to put the same object in more than one list, then std::list doesn't work. You need to instead use std::list, which is less efficient for requiring extra memory allocations. For an example of an object in multiple lists, see the step_over_next/step_over_prev fields in thread_info: /* Step-over chain. A thread is in the step-over queue if these are non-NULL. If only a single thread is in the chain, then these fields point to self. */ struct thread_info *step_over_prev = NULL; struct thread_info *step_over_next = NULL; The new intrusive_list type gives us the advantages of an intrusive linked list, while avoiding the boilerplate associated with manually maintaining it. intrusive_list's API follows the standard container interface, and thus std::list's interface. It is based the API of Boost's intrusive list, here: https://www.boost.org/doc/libs/1_73_0/doc/html/boost/intrusive/list.html Our implementation is relatively simple, while Boost's is complicated and intertwined due to a lot of customization options, which our version doesn't have. The easiest way to use an intrusive_list is to make the list's element type inherit from intrusive_node. This adds a prev/next pointers to the element type. However, to support putting the same object in more than one list, intrusive_list supports putting the "node" info as a field member, so you can have more than one such nodes, one per list. As a first guinea pig, this patch makes the per-inferior thread list use intrusive_list using the base class method. Unlike Boost's implementation, ours is not a circular list. An earlier version of the patch was circular: the intrusive_list type included an intrusive_list_node "head". In this design, a node contained pointers to the previous and next nodes, not the previous and next elements. This wasn't great for when debugging GDB with GDB, as it was difficult to get from a pointer to the node to a pointer to the element. With the design proposed in this patch, nodes contain pointers to the previous and next elements, making it easy to traverse the list by hand and inspect each element. The intrusive_list object contains pointers to the first and last elements of the list. They are nullptr if the list is empty. Each element's node contains a pointer to the previous and next elements. The first element's previous pointer is nullptr and the last element's next pointer is nullptr. Therefore, if there's a single element in the list, both its previous and next pointers are nullptr. To differentiate such an element from an element that is not linked into a list, the previous and next pointers contain a special value (-1) when the node is not linked. This is necessary to be able to reliably tell if a given node is currently linked or not. A begin() iterator points to the first item in the list. An end() iterator contains nullptr. This makes iteration until end naturally work, as advancing past the last element will make the iterator contain nullptr, making it equal to the end iterator. If the list is empty, a begin() iterator will contain nullptr from the start, and therefore be immediately equal to the end. Iterating on an intrusive_list yields references to objects (e.g. `thread_info&`). The rest of GDB currently expects iterators and ranges to yield pointers (e.g. `thread_info*`). To bridge the gap, add the reference_to_pointer_iterator type. It is used to define inf_threads_iterator. Add a Python pretty-printer, to help inspecting intrusive lists when debugging GDB with GDB. Here's an example of the output: (top-gdb) p current_inferior_.m_obj.thread_list $1 = intrusive list of thread_info = {0x61700002c000, 0x617000069080, 0x617000069400, 0x61700006d680, 0x61700006eb80} It's not possible with current master, but with this patch [1] that I hope will be merged eventually, it's possible to index the list and access the pretty-printed value's children: (top-gdb) p current_inferior_.m_obj.thread_list[1] $2 = (thread_info *) 0x617000069080 (top-gdb) p current_inferior_.m_obj.thread_list[1].ptid $3 = { m_pid = 406499, m_lwp = 406503, m_tid = 0 } Even though iterating the list in C++ yields references, the Python pretty-printer yields pointers. The reason for this is that the output of printing the thread list above would be unreadable, IMO, if each thread_info object was printed in-line, since they contain so much information. I think it's more useful to print pointers, and let the user drill down as needed. [1] https://sourceware.org/pipermail/gdb-patches/2021-April/178050.html Co-Authored-By: Simon Marchi Change-Id: I3412a14dc77f25876d742dab8f44e0ba7c7586c0 2021-07-13 GDB Administrator Automatic date update in version.in 2021-07-12 Tucker Add the SEC_ELF_OCTETS flag to debug sections created by the assembler. PR 28054 gas * config/obj-elf.c (obj_elf_change_section): Set the SEF_ELF_OCTETS flag on debug sections. 2021-07-12 Tom de Vries [gdb/testsuite] Fix gdb.btrace/tsx.exp on system with tsx disabled in microcode Recently I started to see this fail with trunk: ... (gdb) record instruction-history^M 1 0x00000000004004ab : call 0x4004b7 ^M 2 0x00000000004004c6 : mov $0x1,%eax^M 3 0x00000000004004cb : ret ^M (gdb) FAIL: gdb.btrace/tsx.exp: speculation indication ... This is due to an intel microcode update (1) that disables Intel TSX by default. Fix this by updating the pattern. Tested on x86_64-linux, with both gcc 7.5.0 and clang 12.0.1. [1] https://www.intel.com/content/www/us/en/support/articles/000059422/processors.html gdb/testsuite/ChangeLog: 2021-07-12 Tom de Vries PR testsuite/28057 * gdb.btrace/tsx.exp: Add pattern for system with tsx disabled in microcode. 2021-07-12 Nick Clifton Updated French translation for the binutils sub-directory Fix a translation problem for the text generated by readelf at the start of a dump of a dynamic section. PR 28072 binutils * readelf.c (process_dynamic_section): Use ngettext to help with translation of header text. 2021-07-12 Tom de Vries [gdb/testsuite] Fix gdb.mi/mi-info-sources.exp for extra debug info When running test-case gdb.mi/mi-info-sources.exp, I run into: ... Running src/gdb/testsuite/gdb.mi/mi-info-sources.exp ... ERROR: internal buffer is full. ... due to extra debug info from the shared libraries. Fix this by using "nosharedlibrary". Then I run into these FAILs: ... FAIL: gdb.mi/mi-info-sources.exp: debug_read=false: \ -file-list-exec-source-files (unexpected output) FAIL: gdb.mi/mi-info-sources.exp: debug_read=true: \ -file-list-exec-source-files (unexpected output) FAIL: gdb.mi/mi-info-sources.exp: debug_read=true: \ -file-list-exec-source-files --group-by-objfile, look for \ mi-info-sources.c (unexpected output) FAIL: gdb.mi/mi-info-sources.exp: debug_read=true: \ -file-list-exec-source-files --group-by-objfile, look for \ mi-info-sources-base.c (unexpected output) ... due to openSUSE executables which have debug info for objects from sources like sysdeps/x86_64/crtn.S. Fix these by updating the patterns, and adding "maint expand-symtabs" to reliably get fully-read objfiles. Then I run into FAILs when using the readnow target board. Fix these by skipping the relevant tests. Then I run into FAILs when using the cc-with-gnu-debuglink board. Fix these by updating the patterns. Tested on x86_64-linux, with native, check-read1, readnow, cc-with-gdb-index, cc-with-debug-names, cc-with-gnu-debuglink, cc-with-dwz, cc-with-dwz-m. gdb/testsuite/ChangeLog: 2021-07-05 Tom de Vries * lib/mi-support.exp (mi_readnow): New proc. * gdb.mi/mi-info-sources.exp: Use nosharedlibrary. Update patterns. Skip tests for readnow. Use "maint expand-symtabs". 2021-07-12 Tankut Baris Aktemur testsuite: fix whitespace problems in gdb.mi/mi-break.exp Replace leading 8-spaces with tab and remove trailing space in gdb.mi/mi-break.exp. 2021-07-12 GDB Administrator Automatic date update in version.in 2021-07-11 GDB Administrator Automatic date update in version.in 2021-07-10 Alan Modra Tidy commit 49910fd88dcd Pointer range checking is UB if the values compared are outside the underlying array elements (plus one). * dwarf2.c (read_address): Remove accidental commit. (read_ranges): Compare offset rather than pointers. 2021-07-10 Alan Modra PR28069, assertion fail in dwarf.c:display_discr_list We shouldn't be asserting on anything to do with leb128 values, or reporting file and line numbers when something unexpected happens. leb128 data is of indeterminate length, perfect for fuzzer mayhem. It would only make sense to assert or report dwarf.c/readelf.c source lines if the code had already sized and sanity checked the leb128 values. After removing the assertions, the testcase then gave: <37> DW_AT_discr_list : 5 byte block: 0 0 0 0 0 (label 0, label 0, label 0, label 0, readelf: Warning: corrupt discr_list - unrecognized discriminant byte 0x5 <3d> DW_AT_encoding : 0 (void) <3e> DW_AT_identifier_case: 0 (case_sensitive) <3f> DW_AT_virtuality : 0 (none) <40> DW_AT_decimal_sign: 5 (trailing separate) So the DW_AT_discr_list was showing more data than just the 5 byte block. That happened due to "end" pointing a long way past the end of block, and uvalue decrementing past zero on one of the leb128 bytes. PR 28069 * dwarf.c (display_discr_list): Remove assertions. Delete "end" parameter, use initial "data" pointer as the end. Formatting. Don't count down bytes as they are read. (read_and_display_attr_value): Adjust display_discr_list call. (read_and_print_leb128): Don't pass __FILE__ and __LINE__ to report_leb_status. * dwarf.h (report_leb_status): Don't report file and line numbers. Delete file and lnum parameters, (READ_ULEB, READ_SLEB): Adjust. 2021-07-10 GDB Administrator Automatic date update in version.in 2021-07-09 H.J. Lu ld/NEWS: Clarify -z [no]indirect-extern-access -z [no]indirect-extern-access are only for x86 ELF linker. 2021-07-09 H.J. Lu elf: Limits 2 GNU_PROPERTY_1_NEEDED tests to Linux/x86 Run property-1_needed-1b.d and property-1_needed-1c.d, which pass -z [no]indirect-extern-access to linker, only run for Linux/x86 targets. * testsuite/ld-elf/property-1_needed-1b.d: Only run for Linux/x86 targets. * testsuite/ld-elf/property-1_needed-1c.d: Likewise. 2021-07-09 H.J. Lu elf: Add GNU_PROPERTY_1_NEEDED check If GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS is set on any input relocatable files: 1. Don't generate copy relocations. 2. Turn off extern_protected_data since it implies GNU_PROPERTY_NO_COPY_ON_PROTECTED. 3. Treate reference to protected symbols with indirect external access as local. 4. Set GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS on output. 5. When generating executable, clear this bit when there are non-GOT or non-PLT relocations in input relocatable files without the bit set. 6. Add -z [no]indirect-extern-access to control indirect external access. bfd/ * elf-bfd (elf_obj_tdata): Add has_indirect_extern_access. (elf_has_indirect_extern_access): New. * elf-properties.c (_bfd_elf_parse_gnu_properties): Set elf_has_indirect_extern_access and elf_has_no_copy_on_protected when seeing GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS. (elf_write_gnu_propertie): Add an argument to pass link_info. Set needed_1_p for GNU_PROPERTY_1_NEEDED in memory. (_bfd_elf_link_setup_gnu_properties): Handle GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS for -z indirect-extern-access. Set nocopyreloc to true and extern_protected_data to false for indirect external access. (_bfd_elf_convert_gnu_properties): Updated. * elf32-i386.c (elf_i386_check_relocs): Set non_got_ref_without_indirect_extern_access on legacy non-GOT or non-PLT references. * elf64-x86-64.c (elf_x86_64_check_relocs): Likewise. * elflink.c (_bfd_elf_symbol_refs_local_p): Return true for STV_PROTECTED symbols with indirect external access. * elfxx-x86.c (_bfd_x86_elf_adjust_dynamic_symbol): Clear indirect_extern_access for legacy non-GOT/non-PLT references. * elfxx-x86.h (elf_x86_link_hash_entry): Add non_got_ref_without_indirect_extern_access. include/ * bfdlink.h (bfd_link_info): Add indirect_extern_access and needed_1_p. Change nocopyreloc to int. ld/ * NEWS: Mention -z [no]indirect-extern-access * ld.texi: Document -z [no]indirect-extern-access * ldmain.c (main): Initialize link_info.indirect_extern_access to -1. * emulparams/extern_protected_data.sh: Support -z [no]indirect-extern-access. * testsuite/ld-elf/indirect-extern-access-1.rd: New file * testsuite/ld-elf/indirect-extern-access-1a.c: Likewise. * testsuite/ld-elf/indirect-extern-access-1b.c: Likewise. * testsuite/ld-elf/indirect-extern-access-2.rd: Likewise. * testsuite/ld-elf/indirect-extern-access-2a.c: Likewise. * testsuite/ld-elf/indirect-extern-access-2b.c: Likewise. * testsuite/ld-elf/indirect-extern-access-3.rd: Likewise. * testsuite/ld-elf/indirect-extern-access.S: Likewise. * testsuite/ld-elf/property-1_needed-1b.d: Likewise. * testsuite/ld-elf/property-1_needed-1c.d: Likewise. * testsuite/ld-x86-64/indirect-extern-access.rd: Likewise. * testsuite/ld-x86-64/protected-data-1.h: Likewise. * testsuite/ld-x86-64/protected-data-1a.c: Likewise. * testsuite/ld-x86-64/protected-data-1b.c: Likewise. * testsuite/ld-x86-64/protected-data-2a.S: Likewise. * testsuite/ld-x86-64/protected-data-2b.S: Likewise. * testsuite/ld-x86-64/protected-func-2a.S: Likewise. * testsuite/ld-x86-64/protected-func-2b.S: Likewise. * testsuite/ld-x86-64/protected-func-2c.c: Likewise. * testsuite/ld-elf/linux-x86.exp: Run test with GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS. * testsuite/ld-x86-64/x86-64.exp: Run tests for protected function and data with indirect external access. 2021-07-09 H.J. Lu elf: Add GNU_PROPERTY_1_NEEDED Add GNU_PROPERTY_1_NEEDED: #define GNU_PROPERTY_1_NEEDED GNU_PROPERTY_UINT32_OR_LO to indicate the needed properties by the object file. Add GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS: #define GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS (1U << 0) to indicate that the object file requires canonical function pointers and cannot be used with copy relocation. binutils/ * readelf.c (decode_1_needed): New. (print_gnu_property_note): Handle GNU_PROPERTY_1_NEEDED. include/ * elf/common.h (GNU_PROPERTY_1_NEEDED): New. (GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS): Likewise. ld/ * testsuite/ld-elf/property-1_needed-1a.d: New file. * testsuite/ld-elf/property-1_needed-1.s: Likewise. 2021-07-09 GDB Administrator Automatic date update in version.in 2021-07-09 Lancelot SIX Remove unused parameter in maybe_software_singlestep While working around, I noticed that the last parameter of maybe_software_singlestep is never used. This path removes it. Built on x86_64-linux-gnu and riscv64-linux-gnu. gdb/ChangeLog: * infrun.c (maybe_software_singlestep): Remove unused PC parameter. (resume_1): Update calls to maybe_software_singlestep. 2021-07-08 H.J. Lu x86-64: Disallow PC reloc against weak undefined symbols in PIE Disallow PC relocations against weak undefined symbols in PIE since they can lead to non-zero address at run-time. bfd/ PR ld/21782 * elf64-x86-64.c (elf_x86_64_relocate_section): Disallow PC relocations against weak undefined symbols in PIE. ld/ PR ld/21782 * testsuite/ld-x86-64/pie3.d: Expect linker error. 2021-07-08 H.J. Lu ld: Limit cache size and add --max-cache-size=SIZE When link_info.keep_memory is true, linker caches the relocation information and symbol tables of input files in memory. When there are many input files with many relocations, we may run out of memory. Add --max-cache-size=SIZE to set the maximum cache size. bfd/ PR ld/18028 * bfd.c (bfd): Add alloc_size. * elf-bfd.h (_bfd_elf_link_info_read_relocs): New. * elf32-i386.c (elf_i386_check_relocs): Use _bfd_link_keep_memory. Update cache_size. * elf64-x86-64.c (elf_x86_64_check_relocs): Likewise. * elflink.c (_bfd_elf_link_read_relocs): Renamed to ... (_bfd_elf_link_info_read_relocs): This. Update cache_size. (_bfd_elf_link_read_relocs): New. (_bfd_elf_link_check_relocs): Call _bfd_elf_link_info_read_relocs instead of _bfd_elf_link_read_relocs. (elf_link_add_object_symbols): Likewise. (elf_link_input_bfd): Likewise. (init_reloc_cookie_rels): Likewise. (init_reloc_cookie): Update cache_size. Call _bfd_elf_link_info_read_relocs instead of _bfd_elf_link_read_relocs. (link_info_ok): New. (elf_gc_smash_unused_vtentry_relocs): Updated. Call _bfd_elf_link_info_read_relocs instead of _bfd_elf_link_read_relocs. (bfd_elf_gc_sections): Use link_info_ok. Pass &link_info_ok to elf_gc_smash_unused_vtentry_relocs. * libbfd-in.h (_bfd_link_keep_memory): New. * linker.c (_bfd_link_keep_memory): New. * opncls.c (bfd_alloc): Update alloc_size. * bfd-in2.h: Regenerated. * libbfd.h: Likewise. include/ PR ld/18028 * bfdlink.h (bfd_link_info): Add cache_size and max_cache_size. ld/ PR ld/18028 * NEWS: Mention --max-cache-size=SIZE. * ld.texi: Document --max-cache-size=SIZE. * ldlex.h (option_values): Add OPTION_MAX_CACHE_SIZE. * ldmain.c: (main): Set link_info.max_cache_size to -1. * lexsup.c (ld_options): Add --max-cache-size=SIZE. (parse_args): Support OPTION_MAX_CACHE_SIZE. * testsuite/ld-bootstrap/bootstrap.exp: Add test for --max-cache-size=-1. 2021-07-08 Simon Marchi gdb: don't set Linux-specific displaced stepping methods in s390_gdbarch_init According to bug 28056, running an s390x binary gives: (gdb) run Starting program: /usr/bin/ls /home/ubuntu/tmp/gdb-11.0.90.20210705/gdb/linux-tdep.c:2550: internal-error: displaced_step_prepare_status linux_displaced_step_prepare(gdbarch*, thread_info*, CORE_ADDR&): Assertion `gdbarch_data->num_disp_step_buffers > 0' failed. This is because the s390 architecture registers some Linux-specific displaced stepping callbacks in the OS-agnostic s390_gdbarch_init: set_gdbarch_displaced_step_prepare (gdbarch, linux_displaced_step_prepare); set_gdbarch_displaced_step_finish (gdbarch, linux_displaced_step_finish); set_gdbarch_displaced_step_restore_all_in_ptid (gdbarch, linux_displaced_step_restore_all_in_ptid); But then the Linux-specific s390_linux_init_abi_any passes num_disp_step_buffers=0 to linux_init_abi: linux_init_abi (info, gdbarch, 0); The problem happens when linux_displaced_step_prepare is called for the first time. It tries to allocate the displaced stepping buffers, but sees that the number of displaced stepping buffers for that architecture is 0, which is unexpected / invalid. s390_gdbarch_init should not register the linux_* callbacks, that is expected to be done by linux_init_abi. If debugging a bare-metal s390 program, or an s390 program on another OS GDB doesn't know about, we wouldn't want to use them. We would either register no callbacks, if displaced stepping isn't supported, or register a different set of callbacks if we wanted to support displaced stepping in those cases. The commit that refactored the displaced stepping machinery and introduced these set_gdbarch_displaced_step_* calls is 187b041e2514 ("gdb: move displaced stepping logic to gdbarch, allow starting concurrent displaced steps"). However, even before that, s390_gdbarch_init did: set_gdbarch_displaced_step_location (gdbarch, linux_displaced_step_location); ... which already seemed wrong. The Linux-specific callback was used even for non-Linux system. Maybe that was on purpose, because it would also happen to work in some other non-Linux case, or maybe it was simply a mistake. I'll assume that this was a small mistake when s390-tdep.{h,c} where factored out of s390-linux-tdep.c, in d6e589456475 ("s390: Split up s390-linux-tdep.c into two files"). Fix this by removing the setting of these displaced step callbacks from s390_gdbarch_init. Instead, pass num_disp_step_buffers=1 to linux_init_abi, in s390_linux_init_abi_any. Doing so will cause linux_init_abi to register these same callbacks. It will also mean that when debugging a bare-metal s390 executable or an executable on another OS that GDB doesn't know about, gdbarch_displaced_step_prepare won't be set, so displaced stepping won't be used. This patch will need to be merged in the gdb-11-branch, since this is a GDB 11 regression, so here's the ChangeLog entry: gdb/ChangeLog: * s390-linux-tdep.c (s390_linux_init_abi_any): Pass 1 (number of displaced stepping buffers to linux_init_abi. * s390-tdep.c (s390_gdbarch_init): Don't set the Linux-specific displaced-stepping gdbarch callbacks. Change-Id: Ieab2f8990c78fde845ce7378d6fd4ee2833800d5 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28056 2021-07-08 Simon Marchi gdb/Makefile.in: remove testsuite from SUBDIRS When distclean-ing a configured / built gdb directory, like so: $ ./configure && make all-gdb && make distclean The distclean operation fails with: Missing testsuite/Makefile If we look at the SUBDIRS variable in the generated gdb/Makefile, testsuite is there twice: SUBDIRS = doc testsuite data-directory testsuite So we try distclean-ing the testsuite directory twice. The second time, gdb/testsuite/Makefile doesn't exist, so it fails. The first "testsuite" comes from the @subdirs@ replacement, because of the `AC_CONFIG_SUBDIRS` macro in gdb/configure.ac. The second one is hard-coded in gdb/Makefile.in: SUBDIRS = doc @subdirs@ data-directory testsuite The hard-coded was added by: bdbbcd577460 ("Always build 'all' in gdb/testsuite") which came after `testsuite` was removed from @subdirs@ by: f99d1d37496f ("Remove gdb/testsuite/configure") My commit a100a94530eb ("gdb/testsuite: restore configure script") should have removed the hard-coded `testsuite`, since it added it back as a "subdir", but I missed it because I only looked f99d1d37496f to write my patch. Fix this by removing the hard-coded one. This patch should be pushed to both master and gdb-11-branch, hence the ChangeLog entry: gdb/ChangeLog: * Makefile.in (SUBDIRS): Remove testsuite. Change-Id: I63e5590b1a08673c646510b3ecc74600eae9f92d 2021-07-08 Nick Clifton Updated Portuguese translation for the BFD sub-directory 2021-07-08 Tom de Vries [gdb/testsuite] Fix gdb.guile/scm-breakpoint.exp with guile 3.0 When running test-case gdb.guile/scm-breakpoint.exp on openSUSE Tumbleweed with guile 3.0, I run into: ... (gdb) guile (define cp (make-breakpoint "syscall" #:type BP_CATCHPOINT))^M ERROR: In procedure make-breakpoint:^M In procedure gdbscm_make_breakpoint: unsupported breakpoint type in \ position 3: "BP_CATCHPOINT"^M Error while executing Scheme code.^M (gdb) FAIL: gdb.guile/scm-breakpoint.exp: test_catchpoints: \ create a catchpoint via the api ... The same test passes on openSUSE Leap 15.2 with guile 2.0, where the second line of the error message starts with the same prefix as the first: ... ERROR: In procedure gdbscm_make_breakpoint: unsupported breakpoint type in \ position 3: "BP_CATCHPOINT"^M ... I observe the same difference in many other tests, f.i.: ... (gdb) gu (print (value-add i '()))^M ERROR: In procedure value-add:^M In procedure gdbscm_value_add: Wrong type argument in position 2: ()^M Error while executing Scheme code.^M (gdb) PASS: gdb.guile/scm-math.exp: catch error in guile type conversion ... but it doesn't cause FAILs anywhere else. Fix this by updating the regexp to make the "ERROR: " prefix optional. Tested on x86_64-linux, with both guile 2.0 and 3.0. gdb/testsuite/ChangeLog: 2021-07-07 Tom de Vries * gdb.guile/scm-breakpoint.exp: Make additional "ERROR: " prefix in exception printing optional. 2021-07-08 Mike Frysinger sim: erc32: use libsim.a for common objects We're starting to move more objects to the common build that sis did not need before, so linking them is causing problems (when common objects end up needing symbols from non-common objects). Switch it to the libsim.a archive which will allow the link to pull out only what it needs. 2021-07-08 GDB Administrator Automatic date update in version.in 2021-07-07 Nick Clifton Remove an accidental change to elfcode.h included as part of commit 6e0dfbf420. PR 27659 * elfcode.h (elf_swap_symbol_out): Revert accidental change that removed an abort if the shndx pointer is NULL. 2021-07-07 H.J. Lu ld: Check archive only for archive member Since plugin_maybe_claim calls bfd_close on the original input BFD if it isn't an archive member, pass NULL to bfd_plugin_close_file_descriptor to indicate that the BFD isn't an archive member. bfd/ PR ld/18028 * plugin.c (bfd_plugin_close_file_descriptor): Check archive only of abfd != NULL. (try_claim): Pass NULL to bfd_plugin_close_file_descriptor if it isn't an archive member. ld/ PR ld/18028 * plugin.c (plugin_input_file): Add comments for abfd and ibfd. (plugin_object_p): Set input->ibfd to NULL if it isn't an archive member. 2021-07-07 Andreas Krebbel Add changelog entries for last commit 2021-07-07 Andreas Krebbel IBM Z: Add another arch14 instruction opcodes/ * opcodes/s390-opc.txt: Add qpaci. gas/ * testsuite/gas/s390/zarch-arch14.d: Add qpaci. * testsuite/gas/s390/zarch-arch14.s: Add qpaci. 2021-07-07 Rainer Orth Fix Solaris gprof build with --disable-nls gprof fails to compile on Solaris 10 and 11.3 with --disable-nls: In file included from /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/gprof/gprof.h:33, from /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/gprof/basic_blocks.c:24: /usr/include/libintl.h:45:14: error: expected identifier or '(' before 'const' 45 | extern char *dcgettext(const char *, const char *, const int); | ^~~~~~~~~ /usr/include/libintl.h:46:14: error: expected identifier or '(' before 'const' 46 | extern char *dgettext(const char *, const char *); | ^~~~~~~~ /usr/include/libintl.h:47:14: error: expected identifier or '(' before 'const' 47 | extern char *gettext(const char *); | ^~~~~~~ /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/gprof/../bfd/sysdep.h:165:33: error: expected identifier or '(' before 'do' 165 | # define textdomain(Domainname) do {} while (0) | ^~ /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/gprof/../bfd/sysdep.h:165:39: error: expected identifier or '(' before 'while' 165 | # define textdomain(Domainname) do {} while (0) | ^~~~~ /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/gprof/../bfd/sysdep.h:166:46: error: expected identifier or '(' before 'do' 166 | # define bindtextdomain(Domainname, Dirname) do {} while (0) | ^~ /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/gprof/../bfd/sysdep.h:166:52: error: expected identifier or '(' before 'while' 166 | # define bindtextdomain(Domainname, Dirname) do {} while (0) | ^~~~~ /usr/include/libintl.h:55:14: error: expected identifier or '(' before 'unsigned' 55 | extern char *dcngettext(const char *, const char *, | ^~~~~~~~~~ /usr/include/libintl.h:57:14: error: expected identifier or '(' before 'unsigned' 57 | extern char *dngettext(const char *, const char *, | ^~~~~~~~~ /usr/include/libintl.h:59:14: error: expected identifier or '(' before 'unsigned' 59 | extern char *ngettext(const char *, const char *, unsigned long int); | ^~~~~~~~ This is a known issue already partially fixed in binutils/sysdep.h. For gprof, the same fix needs to be applied in bfd/sysdep.h, as the following patch does. Tested on i386-pc-solaris2.10 and i386-pc-solaris2.11. 2021-07-06 Rainer Orth bfd: * sysdep.h [!ENABLE_NLS]: Prevent inclusion of on Solaris. 2021-07-07 Rainer Orth Check for strnlen declaration to fix Solaris 10 build binutils currently fails to compile on Solaris 10: /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c: In function 'bfd_get_debug_link_info_1': /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c:1231:16: error: implicit declaration of function 'strnlen' [-Werror=implicit-function-declaration] 1231 | crc_offset = strnlen (name, size) + 1; | ^~~~~~~ /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c:1231:16: error: incompatible implicit declaration of built-in function 'strnlen' [-Werror] /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c: In function 'bfd_get_alt_debug_link_info': /vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c:1319:20: error: incompatible implicit declaration of built-in function 'strnlen' [-Werror] 1319 | buildid_offset = strnlen (name, size) + 1; | ^~~~~~~ and in a couple of other places. The platform lacks strnlen, and while libiberty.h can provide a fallback declaration, the necessary configure test isn't run. Fixed with the following patch. Tested on i386-pc-solaris2.10. 2021-07-06 Rainer Orth bfd: * configure.ac: Check for strnlen declaration. * configure, config.in: Regenerate. binutils: * configure.ac: Check for strnlen declaration. * configure, config.in: Regenerate. 2021-07-07 Nick Clifton Fix problems translating messages when a percentage sign appears at the end of a string. PR 28051 gas * config/tc-i386.c (offset_in_range): Reformat error messages in order to fix problems when translating. (md_assemble): Likewise. * messages.c (as_internal_value_out_of_range): Likewise. * read.c (emit_expr_with_reloc): Likewise. * testsuite/gas/all/overflow.l Change expected output format. * po/gas.pot: Regenerate. bfd * coff-rs6000.c (xcoff_reloc_type_tls): Reformat error messages in order to fix problems when translating. * cofflink.c (_bfd_coff_write_global_sym): Likewise. * elfnn-aarch64.c (_bfd_aarch64_erratum_843419_branch_to_stub): Likewise. * po/bfd.pot: Regenerate. 2021-07-07 GDB Administrator Automatic date update in version.in 2021-07-06 Simon Marchi gdb: introduce iterator_range, remove next_adapter I was always a bit confused by next_adapter, because it kind of mixes the element type and the iterator type. In reality, it is not much more than a class that wraps two iterators (begin and end). However, it assumes that: - you can construct the begin iterator by passing a pointer to the first element of the iterable - you can default-construct iterator to make the end iterator I think that by generalizing it a little bit, we can re-use it at more places. Rename it to "iterator_range". I think it describes a bit better: it's a range made by wrapping a begin and end iterator. Move it to its own file, since it's not related to next_iterator anymore. iterator_range has two constructors. The variadic one, where arguments are forwarded to construct the underlying begin iterator. The end iterator is constructed through default construction. This is a generalization of what we have today. There is another constructor which receives already constructed begin and end iterators, useful if the end iterator can't be obtained by default-construction. Or, if you wanted to make a range that does not end at the end of the container, you could pass any iterator as the "end". This generalization allows removing some "range" classes, like all_inferiors_range. These classes existed only to pass some arguments when constructing the begin iterator. With iterator_range, those same arguments are passed to the iterator_range constructed and then forwarded to the constructed begin iterator. There is a small functional difference in how iterator_range works compared to next_adapter. next_adapter stored the pointer it received as argument and constructeur an iterator in the `begin` method. iterator_range constructs the begin iterator and stores it as a member. Its `begin` method returns a copy of that iterator. With just iterator_range, uses of next_adapter would be replaced with: using foo_iterator = next_iterator; using foo_range = iterator_range; However, I added a `next_range` wrapper as a direct replacement for next_adapter. IMO, next_range is a slightly better name than next_adapter. The rest of the changes are applications of this new class. gdbsupport/ChangeLog: * next-iterator.h (class next_adapter): Remove. * iterator-range.h: New. gdb/ChangeLog: * breakpoint.h (bp_locations_range): Remove. (bp_location_range): New. (struct breakpoint) : Adjust type. (breakpoint_range): Use iterator_range. (tracepoint_range): Use iterator_range. * breakpoint.c (breakpoint::locations): Adjust return type. * gdb_bfd.h (gdb_bfd_section_range): Use iterator_range. * gdbthread.h (all_threads_safe): Pass argument to all_threads_safe_range. * inferior-iter.h (all_inferiors_range): Use iterator_range. (all_inferiors_safe_range): Use iterator_range. (all_non_exited_inferiors_range): Use iterator_range. * inferior.h (all_inferiors, all_non_exited_inferiors): Pass inferior_list as argument. * objfiles.h (struct objfile) : Remove. : Return compunit_symtab_range. * progspace.h (unwrapping_objfile_iterator) : Take parameter by value. (unwrapping_objfile_range): Use iterator_range. (struct program_space) : Define with "using". : Adjust. : Define with "using". : Adjust. : Return so_list_range, define here. * progspace.c (program_space::solibs): Remove. * psymtab.h (class psymtab_storage) : New. : Use iterator_range. * solist.h (so_list_range): New. * symtab.h (compunit_symtab_range): New. (symtab_range): New. (compunit_filetabs): Change to a function. * thread-iter.h (inf_threads_range, inf_non_exited_threads_range, safe_inf_threads_range, all_threads_safe_range): Use iterator_range. * top.h (ui_range): New. (all_uis): Use ui_range. Change-Id: Ib7a9d2a3547f45f01aa1c6b24536ba159db9b854 2021-07-06 Simon Marchi gdb/testsuite: restore configure script Commit f99d1d37496f ("Remove gdb/testsuite/configure") removed gdb/testsuite/configure, as anything gdb/testsuite/configure did could be done by gdb/configure. There is however one use case that popped up when this changed propagated to downstream consumers, to run the testsuite on an already built GDB. In the workflow of ROCm-GDB at AMD, a GDB package is built in a CI job. This GDB package is then tested on different machines / hardware configurations as part of other CI jobs. To achieve this, those CI jobs only configure the testsuite directory and run "make check" with an appropriate board file. In light of this use case, the way I see it is that gdb/testsuite could be considered its own project. It could be stored in a completely different repo if we want to, it just happens to be stored inside gdb/. Since the only downside of having gdb/testsuite/configure is that it takes a few more seconds to run, but on the other hand it's quite useful for some people, I propose re-adding it. In a sense, this is revert of f99d1d37496f, but it's not a direct git-revert, as some things have changed since. gdb/ChangeLog: * configure.ac: Remove things that were moved from testsuite/configure.ac. * configure: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Restore. * configure: Re-generate. * aclocal.m4: Re-generate. * Makefile.in (distclean): Add config.status. (Makefile): Adjust paths. (lib/pdtrace): Adjust paths. (config.status): Add. Change-Id: Ic38c79485e1835712d9c99649c9dfb59667254f1 2021-07-06 Joel Brobecker Rename gdb/ChangeLog to gdb/ChangeLog-2021 Now that ChangeLog entries are no longer used for GDB patches, this commit renames the file gdb/ChangeLog to gdb/ChangeLog-2021, similar to what we would do in the context of the "Start of New Year" procedure. The purpose of this change is to avoid people merging ChangeLog entries by mistake when applying existing commits that they are currently working on. 2021-07-06 Dan Streetman sim: ppc: add missing empty targets These are copied from sim/common/Make-common.in. On ppc the build fails without at least the 'info' target, e.g.: Making info in ppc make[4]: Entering directory '/<>/gdb-10.2.2974.g5b45e89f56d+21.10.20210510155809/build/default/sim/ppc' make[4]: *** No rule to make target 'info'. Stop. 2021-07-06 Yuri Chornoivan PR 28053: Fix spelling mistakes: usupported -> unsupported and relocatation -> relocation. 2021-07-06 Michael Matz elf/riscv: Fix relaxation with aliases [PR28021] the fix for PR22756 only changed behaviour for hidden aliases, but the same situation exists for non-hidden aliases: sym_hashes[] can contain multiple entries pointing to the same symbol structure leading to relaxation adjustment to be applied twice. Fix this by testing for duplicates for everything that looks like it has a version. PR ld/28021 bfd/ * elfnn-riscv.c (riscv_relax_delete_bytes): Check for any versioning. ld/ * testsuite/ld-riscv-elf/relax-twice.ver: New. * testsuite/ld-riscv-elf/relax-twice-1.s: New. * testsuite/ld-riscv-elf/relax-twice-2.s: New. * testsuite/ld-riscv-elf/ld-riscv-elf.exp (run_relax_twice_test): New, and call it. 2021-07-06 Pedro Alves Qingchuan Shi Update gdb performance testsuite to be compatible with Python 3.8 Running "make check-perf" on a system with Python 3.8 (e.g., Ubuntu 20.04) runs into this Python problem: Traceback (most recent call last): File "", line 1, in File "/home/pedro/rocm/gdb/src/gdb/testsuite/gdb.perf/lib/perftest/perftest.py", line 65, in run self.execute_test() File "", line 35, in execute_test File "/home/pedro/rocm/gdb/src/gdb/testsuite/gdb.perf/lib/perftest/measure.py", line 45, in measure m.start(id) File "/home/pedro/rocm/gdb/src/gdb/testsuite/gdb.perf/lib/perftest/measure.py", line 102, in start self.start_time = time.clock() AttributeError: module 'time' has no attribute 'clock' Error while executing Python code. (gdb) FAIL: gdb.perf/single-step.exp: python SingleStep(1000).run() ... many times over. The problem is that the testsuite is using time.clock(), deprecated in Python 3.3 and finaly removed in Python 3.8. The guidelines say to use time.perf_counter() or time.process_time() instead depending on requirements. Looking at the current description of those functions, at: https://docs.python.org/3.10/library/time.html we have: time.perf_counter() -> float Return the value (in fractional seconds) of a performance counter, i.e. a clock with the highest available resolution to measure a short duration. It does include time elapsed during sleep and is system-wide. (...) time.process_time() -> float Return the value (in fractional seconds) of the sum of the system and user CPU time of the current process. It does not include time elapsed during sleep. It is process-wide by definition. (...) I'm thinking that it's just best to record both instead of picking one. So this patch replaces the MeasurementCpuTime measurement class with two new classes -- MeasurementPerfCounter and MeasurementProcessTime. Correspondingly, this changes the reports in testsuite/perftest.log -- we have two new "perf_counter" and "process_time" measurements and the "cpu_time" measurement is gone. I don't suppose breaking backward compatibility here is a big problem. I suspect no one is really tracking long term performance using the perf testsuite today. And if they are, it shouldn't be hard to adjust. For backward compatility, with Python < 3.3, both perf_counter and process_time use the old time.clock. gdb/testsuite/ChangeLog: yyyy-mm-dd Qingchuan Shi Pedro Alves * gdb.perf/lib/perftest/perftest.py: Import sys. (time.perf_counter, time.process_time): Map to time.clock on Python < 3.3. (MeasurementCpuTime): Delete, replaced by... (MeasurementPerfCounter, MeasurementProcessTime): .. these two new classes. * gdb.perf/lib/perftest/perftest.py: Import MeasurementPerfCounter and MeasurementProcessTime instead of MeasurementCpuTime. (TestCaseWithBasicMeasurements): Use MeasurementPerfCounter and MeasurementProcessTime instead of MeasurementCpuTime. Change-Id: Ia850c05d5ce57d2dada70ba5b0061f566444aa2b 2021-07-06 Pedro Alves gdb.perf/: FAIL on Python errors, avoid "ERROR: internal buffer is full" Currently, if you run make check-perf on a system with Python 3.8, tests seen to PASS, but they actually test a lot less than intended, due to: PerfTest::assemble, run ... python BackTrace(64).run() Traceback (most recent call last): File "", line 1, in File "/home/pedro/rocm/gdb/src/gdb/testsuite/gdb.perf/lib/perftest/perftest.py", line 65, in run self.execute_test() File "", line 49, in execute_test File "/home/pedro/rocm/gdb/src/gdb/testsuite/gdb.perf/lib/perftest/measure.py", line 45, in measure m.start(id) File "/home/pedro/rocm/gdb/src/gdb/testsuite/gdb.perf/lib/perftest/measure.py", line 102, in start self.start_time = time.clock() AttributeError: module 'time' has no attribute 'clock' Error while executing Python code. (gdb) PASS: gdb.perf/backtrace.exp: python BackTrace(64).run() And then, after fixing the above Python compatibility issues (which will be a separate patch), I get 86 instances of overflowing expect's buffer, like: ERROR: internal buffer is full. UNRESOLVED: gdb.perf/single-step.exp: python SingleStep(1000).run() This patch fixes both problems by adding & using a gdb_test_python_run routine that: - checks for Python errors - consumes output line by line gdb/testsuite/ChangeLog: yyyy-mm-dd Pedro Alves * gdb.perf/backtrace.exp: Use gdb_test_python_run. * gdb.perf/disassemble.exp: Use gdb_test_python_run. * gdb.perf/single-step.exp: Use gdb_test_python_run. * gdb.perf/skip-command.exp: Use gdb_test_python_run. * gdb.perf/skip-prologue.exp: Use gdb_test_python_run. * gdb.perf/solib.exp: Use gdb_test_python_run. * gdb.perf/template-breakpoints.exp: Use gdb_test_python_run. * lib/perftest.exp (gdb_test_python_run): New. Change-Id: I007af36f164b3f4cda41033616eaaa4e268dfd2f 2021-07-06 Tom de Vries [gdb/testsuite] Remove read1 timeout factor from gdb.base/info-macros.exp At the moment some check-read1 timeouts are handled like this in gdb.base/info-macros.exp: ... gdb_test_multiple_with_read1_timeout_factor 10 "$test" $testname { -re "$r1$r2$r3" { pass $testname } -re ".*#define TWO.*\r\n$gdb_prompt" { fail $testname } -re ".*#define THREE.*\r\n$gdb_prompt" { fail $testname } -re ".*#define FOUR.*\r\n$gdb_prompt" { fail $testname } } ... which is not ideal. We could use gdb_test_lines, but it currently doesn't support verifying the absence of regexps, which is done using the clauses above calling fail. Fix this by using gdb_test_lines and adding a -re-not syntax to gdb_test_lines, such that we can do: ... gdb_test_lines $test $testname $r1.*$r2 \ -re-not "#define TWO" \ -re-not "#define THREE" \ -re-not "#define FOUR" ... Tested on x86_64-linux, whith make targets check and check-read1. Also observed that check-read1 execution time is reduced from 6m35s to 13s. gdb/testsuite/ChangeLog: 2021-07-06 Tom de Vries * gdb.base/info-macros.exp: Replace use of gdb_test_multiple_with_read1_timeout_factor with gdb_test_lines. (gdb_test_multiple_with_read1_timeout_factor): Remove. * lib/gdb.exp (gdb_test_lines): Add handling or -re-not . 2021-07-06 Nelson Chu RISC-V: Fix the build broken with -Werror. ChangeLog: bfd/ * elfnn-riscv.c(riscv_elf_additional_program_headers): Removed the unused variable s. (riscv_elf_modify_segment_map): Added ATTRIBUTE_UNUSED for the unused parameter info. 2021-07-06 Tom de Vries [gdb/symtab] Fix skipping of import of C++ CU Tom Tromey observed that when changing the language in gdb.dwarf2/imported-unit-bp.exp from c to c++, the test failed. This is due to this code in process_imported_unit_die: ... /* We're importing a C++ compilation unit with tag DW_TAG_compile_unit into another compilation unit, at root level. Regard this as a hint, and ignore it. */ if (die->parent && die->parent->parent == NULL && per_cu->unit_type == DW_UT_compile && per_cu->lang == language_cplus) return; ... which should have a partial symtabs counterpart. Add the missing counterpart in process_psymtab_comp_unit. Tested on x86_64-linux (openSUSE Leap 15.2), no regressions for config: - using default gcc version 7.5.0 (with 5 unexpected FAILs) - gcc 10.3.0 and target board unix/-flto/-O0/-flto-partition=none/-ffat-lto-objects (with 1000 unexpected FAILs) gdb/ChangeLog: 2021-07-06 Tom de Vries * dwarf2/read.c (scan_partial_symbols): Skip top-level imports of c++ CU. * testsuite/gdb.dwarf2/imported-unit-bp.exp: Moved to ... * testsuite/gdb.dwarf2/imported-unit-bp.exp.tcl: ... here. * testsuite/gdb.dwarf2/imported-unit-bp-c++.exp: New test. * testsuite/gdb.dwarf2/imported-unit-bp-c.exp: New test. * testsuite/gdb.dwarf2/imported-unit.exp: Update. 2021-07-06 Kito Cheng RISC-V: Add PT_RISCV_ATTRIBUTES and add it to PHDR. We added PT_RISCV_ATTRIBUTES to program header to make .riscv.attribute easier to find in dynamic loader or kernel. Ref: https://github.com/riscv/riscv-elf-psabi-doc/pull/71 ChangeLog: bfd/ * elfnn-riscv.c(RISCV_ATTRIBUTES_SECTION_NAME): New. (riscv_elf_additional_program_headers): Ditto. (riscv_elf_modify_segment_map): Ditto. (elf_backend_additional_program_headers): Ditto. (elf_backend_modify_segment_map): Ditto. (elf_backend_obj_attrs_section): Use RISCV_ATTRIBUTES_SECTION_NAME rather than string literal. binutils/ * readelf.c(get_riscv_segment_type): New. (get_segment_type): Handle EM_RISCV. include/ * elf/riscv.h (PT_RISCV_ATTRIBUTES): New. * testsuite/ld-elf/orphan-region.ld: Discard .riscv.attributes section for simplify testcase. * testsuite/ld-riscv-elf/attr-phdr.d: New. * testsuite/ld-riscv-elf/attr-phdr.s: Ditto. * testsuite/ld-riscv-elf/ld-riscv-elf.exp: Add attr-phdr to testcase. 2021-07-06 Alan Modra Re: PR28055, segfault in bpf special reloc function PR 28055 * elf64-bpf.c (bpf_elf_generic_reloc): Add missing ATTRIBUTE_UNUSED. 2021-07-06 GDB Administrator Automatic date update in version.in 2021-07-05 Tom Tromey Simplify debug_names index writing This changes the .debug_names writer to find the TU indices in the main loop over all CUs and TUs. (An earlier patch applied this same treatment to the .gdb_index writer.) Simplify gdb_index writing write_gdbindex writes the CUs first, then walks the signatured type hash table to write out the TUs. However, now that CUs and TUs are unified in the DWARF reader, it's simpler to handle both of these in the same loop. Minor cleanup to addrmap_index_data::previous_valid This changes addrmap_index_data::previous_valid to a bool, and initializes it inline. 2021-07-05 Tom Tromey Fix oddity in write_gdbindex My recent patch to unify CUs and TUs introduced an oddity in write_gdbindex. Here, we pass 'i' to recursively_write_psymbols, but we must instead pass 'counter', to handle the situation where a TU is mixed in with the CUs. I am not sure a test case for this is possible. I think it can only happen when using DWARF 5, where a TU appears in .debug_info. However, this situation is already not handled correctly by .gdb_index. I filed a bug about this. 2021-07-05 Tom Tromey Fix warning in symtab.c The compiler gives this warning when building symtab.c: ../../binutils-gdb/gdb/symtab.c:4247:28: warning: 'to_match' may be used uninitialized in this function [-Wmaybe-uninitialized] This patch fixes the warning by adding a gdb_assert_not_reached. 2021-07-05 H.J. Lu ld: Cache and reuse the IR archive file descriptor Linker plugin_object_p opens the IR archive for each IR archive member. For GCC plugin, plugin_object_p closes the archive file descriptor. But for LLVM plugin, the archive file descriptor remains open. If there are 3000 IR archive members, there are 3000 file descriptors for them. We can run out of file descriptors petty easily. 1. Add archive_plugin_fd and archive_plugin_fd_open_count to bfd so that we can cache and reuse the IR archive file descriptor for all IR archive members in the archive. 2. Add bfd_plugin_close_file_descriptor to properly close the IR archive file descriptor. bfd/ PR ld/28040 * archive.c (_bfd_archive_close_and_cleanup): Close the archive plugin file descriptor if needed. * bfd.c (bfd): Add archive_plugin_fd and archive_plugin_fd_open_count. * opncls.c (_bfd_new_bfd): Initialize to -1. * plugin.c (bfd_plugin_open_input): Cache and reuse the archive plugin file descriptor. (bfd_plugin_close_file_descriptor): New function. (try_claim): Call bfd_plugin_close_file_descriptor. * plugin.h (bfd_plugin_close_file_descriptor): New. * bfd-in2.h: Regenerated. ld/ PR ld/28040 * plugin.c (plugin_input_file): Add ibfd. (release_plugin_file_descriptor): New function. (release_input_file): Call release_plugin_file_descriptor to close input->fd. (plugin_object_p): Call release_plugin_file_descriptor to close input->fd. Also call release_plugin_file_descriptor if not claimed. * testsuite/config/default.exp (RANLIB): New. * testsuite/ld-plugin/lto.exp: Run ranlib test. 2021-07-05 Nick Clifton Restore the libiberty component of commit 50ad1254d5030d0804cbf89c758359ae202e8d55. This commit has not yet been applied to the master sources in the gcc repository. It was submitted here: https://gcc.gnu.org/pipermail/gcc-patches/2021-July/574405.html The commit allows options to be set for the AR and RANLIB programs used when building libiberty, which in turn allows building with LTO enabled. Updated translations (mainly Ukranian and French) triggered by creation of 2.37 branch. 2021-07-05 Tom de Vries [gdb/testsuite] Fix fail in gdb.fortran/ptype-on-functions.exp with gcc-7 Since commit 05b85772061 "gdb/fortran: Add type info of formal parameter for clang" I see: ... (gdb) ptype say_string^M type = void (character*(*), integer(kind=4))^M (gdb) FAIL: gdb.fortran/ptype-on-functions.exp: ptype say_string ... The part of the commit causing the fail is: ... gdb_test "ptype say_string" \ - "type = void \\(character\\*\\(\\*\\), integer\\(kind=\\d+\\)\\)" + "type = void \\(character\[^,\]+, $integer8\\)" ... which fails to take into account that for gcc-7 and before, the type for string length of a string argument is int, not size_t. Fix this by allowing both $integer8 and $integer4. Tested on x86_64-linux, with gcc-7 and gcc-10. gdb/testsuite/ChangeLog: 2021-07-05 Tom de Vries * gdb.fortran/ptype-on-functions.exp: Allow both $integer8 and $integer4 for size of string length. 2021-07-05 Simon Marchi gdb: fall back on sigpending + sigwait if sigtimedwait is not available The macOS platform does not provide sigtimedwait, so we get: CXX compile/compile.o In file included from /Users/smarchi/src/binutils-gdb/gdb/compile/compile.c:46: /Users/smarchi/src/binutils-gdb/gdb/../gdbsupport/scoped_ignore_signal.h:69:4: error: use of undeclared identifier 'sigtimedwait' sigtimedwait (&set, nullptr, &zero_timeout); ^ An alternative to sigtimedwait with a timeout of 0 is to use sigpending, to first check which signals are pending, and then sigwait, to consume them. Since that's slightly more expensive (2 syscalls instead of 1), keep using sigtimedwait for the platforms that provide it, and fall back to sigpending + sigwait for the others. gdbsupport/ChangeLog: * scoped_ignore_signal.h (struct scoped_ignore_signal) <~scoped_ignore_signal>: Use sigtimedwait if HAVE_SIGTIMEDWAIT is defined, else use sigpending + sigwait. Change-Id: I2a72798337e81dd1bbd21214736a139dd350af87 Co-Authored-By: John Baldwin 2021-07-05 Simon Marchi gdbsupport/common.m4: check for sigtimedwait The next patch will make the use of sigtimedwait conditional to whether the platform provides it. Start by adding a configure check for it. gdbsupport/ChangeLog: * common.m4 (GDB_AC_COMMON): Check for sigtimedwait. * config.in, configure: Re-generate. gdb/ChangeLog: * config.in, configure: Re-generate. gdbserver/ChangeLog: * config.in, configure: Re-generate. Change-Id: Ic7613fe14521b966b4d991bbcd0933ab14629c05 2021-07-05 Alan Modra Re: opcodes: constify & local meps macros Commit f375d32b35ce changed a generated file. Edit the source instead. * mep.opc (macros): Make static and const. (lookup_macro): Return and use const pointer. (expand_macro): Make mac param const. (expand_string): Make pmacro const. 2021-07-05 Alan Modra PR28055, segfault in bpf special reloc function The testcase in this PR tickled two bugs fixed here. output_bfd is NULL when a reloc special_function is called for final linking and when called from bfd_generic_get_relocated_section_contents. Clearly using output_bfd is wrong as it results in segfaults. Not only that, the endianness of the reloc field really should be that of the input. The second bug was not checking that the entire reloc field was contained in the section contents. PR 28055 * elf64-bpf.c (bpf_elf_generic_reloc): Use correct bfd for bfd_put and bfd_put_32 calls. Correct section limit checks. 2021-07-05 Alan Modra PR28047, readelf crash due to assertion failure DW_FORM_ref1, DW_FORM_ref2, DW_FORM_ref4, DW_FORM_ref1, and DW_FORM_ref_udata are all supposed to be within the containing unit. PR 28047 * dwarf.c (get_type_abbrev_from_form): Add cu_end parameter. Check DW_FORM_ref1 etc. arg against cu_end rather than end of section. Adjust all callers. 2021-07-05 GDB Administrator Automatic date update in version.in 2021-07-04 Simon Marchi gdb: return early if no execution in darwin_solib_create_inferior_hook When loading a file using the file command on macOS, we get: $ ./gdb -nx --data-directory=data-directory -q -ex "file ./test" Reading symbols from ./test... Reading symbols from /Users/smarchi/build/binutils-gdb/gdb/test.dSYM/Contents/Resources/DWARF/test... /Users/smarchi/src/binutils-gdb/gdb/thread.c:72: internal-error: struct thread_info *inferior_thread(): Assertion `current_thread_ != nullptr' failed. A problem internal to GDB has been detected, further debugging may prove unreliable. Quit this debugging session? (y or n) The backtrace is: * frame #0: 0x0000000101fcb826 gdb`internal_error(file="/Users/smarchi/src/binutils-gdb/gdb/thread.c", line=72, fmt="%s: Assertion `%s' failed.") at errors.cc:52:3 frame #1: 0x00000001018a2584 gdb`inferior_thread() at thread.c:72:3 frame #2: 0x0000000101469c09 gdb`get_current_regcache() at regcache.c:421:31 frame #3: 0x00000001015f9812 gdb`darwin_solib_get_all_image_info_addr_at_init(info=0x0000603000006d00) at solib-darwin.c:464:34 frame #4: 0x00000001015f7a04 gdb`darwin_solib_create_inferior_hook(from_tty=1) at solib-darwin.c:515:5 frame #5: 0x000000010161205e gdb`solib_create_inferior_hook(from_tty=1) at solib.c:1200:3 frame #6: 0x00000001016d8f76 gdb`symbol_file_command(args="./test", from_tty=1) at symfile.c:1650:7 frame #7: 0x0000000100abab17 gdb`file_command(arg="./test", from_tty=1) at exec.c:555:3 frame #8: 0x00000001004dc799 gdb`do_const_cfunc(c=0x000061100000c340, args="./test", from_tty=1) at cli-decode.c:102:3 frame #9: 0x00000001004ea042 gdb`cmd_func(cmd=0x000061100000c340, args="./test", from_tty=1) at cli-decode.c:2160:7 frame #10: 0x00000001018d4f59 gdb`execute_command(p="t", from_tty=1) at top.c:674:2 frame #11: 0x0000000100eee430 gdb`catch_command_errors(command=(gdb`execute_command(char const*, int) at top.c:561), arg="file ./test", from_tty=1, do_bp_actions=true)(char const*, int), char const*, int, bool) at main.c:523:7 frame #12: 0x0000000100eee902 gdb`execute_cmdargs(cmdarg_vec=0x00007ffeefbfeba0 size=1, file_type=CMDARG_FILE, cmd_type=CMDARG_COMMAND, ret=0x00007ffeefbfec20) at main.c:618:9 frame #13: 0x0000000100eed3a4 gdb`captured_main_1(context=0x00007ffeefbff780) at main.c:1322:3 frame #14: 0x0000000100ee810d gdb`captured_main(data=0x00007ffeefbff780) at main.c:1343:3 frame #15: 0x0000000100ee8025 gdb`gdb_main(args=0x00007ffeefbff780) at main.c:1368:7 frame #16: 0x00000001000044f1 gdb`main(argc=6, argv=0x00007ffeefbff8a0) at gdb.c:32:10 frame #17: 0x00007fff20558f5d libdyld.dylib`start + 1 The solib_create_inferior_hook call in symbol_file_command was added by commit ea142fbfc9c1 ("Fix breakpoints on file reloads for PIE binaries"). It causes solib_create_inferior_hook to be called while the inferior is not running, which darwin_solib_create_inferior_hook does not expect. darwin_solib_get_all_image_info_addr_at_init, in particular, assumes that there is a current thread, as it tries to get the current thread's regcache. Fix it by adding a target_has_execution check and returning early. Note that there is a similar check in svr4_solib_create_inferior_hook. gdb/ChangeLog: * solib-darwin.c (darwin_solib_create_inferior_hook): Return early if no execution. Change-Id: Ia11dd983a1e29786e5ce663d0fcaa6846dc611bb 2021-07-04 GDB Administrator Automatic date update in version.in 2021-07-03 H.J. Lu gprof: Regenerate configure * configure: Regenerated. 2021-07-03 Joel Brobecker Update NEWS post GDB 11 branch creation. gdb/ChangeLog: * NEWS: Create a new section for the next release branch. Rename the section of the current branch, now that it has been cut. 2021-07-03 Joel Brobecker Bump version to 12.0.50.DATE-git. Now that the GDB 11 branch has been created, we can bump the version number. gdb/ChangeLog: GDB 11 branch created (4b51505e33441c6165e7789fa2b6d21930242927): * version.in: Bump version to 12.0.50.DATE-git. gdb/testsuite/ChangeLog: * gdb.base/default.exp: Change $_gdb_major to 12. 2021-07-03 Tom Tromey Use 'bool' more idiomatically in dwarf_decode_lines I noticed a couple of spots related to dwarf_decode_lines where the 'include_p' field was not being used idiomatically -- it is of type bool now, so treat it as such. gdb/ChangeLog 2021-07-03 Tom Tromey * dwarf2/read.c (lnp_state_machine::record_line): Use 'true'. (dwarf_decode_lines): Remove '=='. 2021-07-03 Nick Clifton More minor updates to the how-to-make-a-release documentation Update version number and regenerate files Add markers for 2.37 branch