From 071ea11e85eb9d529cc5eb3d35f6247466a21b99 Mon Sep 17 00:00:00 2001 From: Stan Shebs Date: Fri, 16 Apr 1999 01:34:07 +0000 Subject: Initial creation of sourceware repository --- gdb/testsuite/gdb.trace/tfind.exp | 405 -------------------------------------- 1 file changed, 405 deletions(-) delete mode 100644 gdb/testsuite/gdb.trace/tfind.exp (limited to 'gdb/testsuite/gdb.trace/tfind.exp') diff --git a/gdb/testsuite/gdb.trace/tfind.exp b/gdb/testsuite/gdb.trace/tfind.exp deleted file mode 100644 index 5d70951..0000000 --- a/gdb/testsuite/gdb.trace/tfind.exp +++ /dev/null @@ -1,405 +0,0 @@ -# Copyright (C) 1998 Free Software Foundation, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - -# Please email any bugs, comments, and/or additions to this file to: -# bug-gdb@prep.ai.mit.edu - -# This file was written by Michael Snyder (msnyder@cygnus.com) - -load_lib "trace-support.exp"; - -if $tracelevel then { - strace $tracelevel -} - -set prms_id 0 -set bug_id 0 - -gdb_exit -gdb_start - -if [istarget "m68k-*-elf"] then { - load_lib "emc-support.exp"; - set srcfile gdb_c_test.c - set binfile [board_info target d490_binfile]; - gdb_test "set remotetimeout 6" "" "" - set timeout 500 - gdb_target_monitor $binfile - # Give a TSTOP and ignore errors, to make sure any previous trace is off - gdb_test "tstop" "" "" - gdb_test "tfind none" "" "" - send_gdb "compare-sections CS\n" - gdb_expect { - -re "MIS-MATCHED.*$gdb_prompt $" { - gdb_suppress_entire_file "Symbol file does not match target! - all tests in this module will fail."; - } - -re ".*$gdb_prompt $" { } - } -} else { - set testfile "actions" - set srcfile ${testfile}.c - set binfile $objdir/$subdir/$testfile - if { [gdb_compile "$srcdir/$subdir/$srcfile" "$binfile -O1" \ - executable {debug additional_flags="-gdwarf"}] != "" } { - gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail." - } - gdb_load $binfile - gdb_test "tstop" "" "" - gdb_test "tfind none" "" "" - runto_main -} -gdb_reinitialize_dir $srcdir/$subdir - -# We generously give ourselves one "pass" if we successfully -# detect that this test cannot be run on this target! -if { ![gdb_target_supports_trace] } then { - pass "Current target does not supporst trace" - return 1; - -} - -# If testing on a remote host, download the source file. -remote_download host $srcdir/$subdir/$srcfile - -# define relative source line numbers: -# all subsequent line numbers are relative to this first one (baseline) -set baseline [gdb_find_recursion_test_baseline $srcfile]; -if { $baseline == -1 } then { - fail "Could not find gdb_recursion_test function" - return; -} - -set testline1 [expr $baseline + 1] -set testline2 [expr $baseline + 5] -set testline3 [expr $baseline + 6] -set testline4 [expr $baseline + 7] -set testline5 [expr $baseline + 8] - -# -# test tfind command -# - -gdb_delete_tracepoints -set tdp1 [gdb_gettpnum "\*gdb_recursion_test"] -set tdp2 [gdb_gettpnum $testline2] -set tdp3 [gdb_gettpnum $testline3] -set tdp4 [gdb_gettpnum $testline4] -set tdp5 [gdb_gettpnum $testline5] -if { $tdp1 <= 0 || $tdp2 <= 0 || $tdp3 <= 0 || \ - $tdp4 <= 0 || $tdp5 <= 0 } then { - fail "setting tracepoints" - return; -} - -# 6.1 test tstart command -send_gdb "tstart\n" -gdb_expect { - -re "Trace can only be run on remote targets.*$gdb_prompt $" { - fail "6.1: tstart (not connected to remote?)" - return; - } - -re "Target does not support this command.*$gdb_prompt $" { - fail "6.1: tstart (connected to wrong target?)" - return; - } - -re "Target returns error code.*$gdb_prompt $" { - fail "6.1: tstart (connected to wrong target?)" - return; - } - -re "$gdb_prompt $" { - pass "6.1: tstart" - } - default { - fail "6.1: tstart (default)" - return; - } -} - -# test tstatus (when trace on) -gdb_test "tstatus" "\[Tt\]race is running.*" "test tstatus on" - -# 6.2 test help tstart -gdb_test "help tstart" "Start trace data collection." "6.2: help tstart" - -if [istarget "m68k-*-elf"] then { - gdb_emclaptop_command "85,1,2,3,4,5,6" - sleep 5 - - gdb_emclaptop_command "85,7,8,9,A,B,C" - sleep 5 -} else { - gdb_test "break end" "" "" - gdb_test "continue" \ - "Continuing.*Breakpoint $decimal, end.*" \ - "run trace experiment" -} - -# 7.1 test tstop command -send_gdb "tstop\n" -gdb_expect { - -re "Trace can only be run on remote targets.*$gdb_prompt $" { - fail "7.1: tstop (not connected to remote?)" - return; - } - -re "Target does not support this command.*$gdb_prompt $" { - fail "7.1: tstop (connected to wrong target?)" - return; - } - -re "Target returns error code.*$gdb_prompt $" { - fail "7.1: tstop (connected to wrong target?)" - return; - } - -re "$gdb_prompt $" { - pass "7.1: tstop" - } - default { - fail "7.1: tstop (default)" - return; - } -} - -# 7.2 test help tstop -gdb_test "help tstop" "Stop trace data collection." "7.2: help tstop" - -# test tstatus (when trace off) -gdb_test "tstatus" "\[Tt\]race.* not running.*" "test tstatus off" - -## record starting PC -set save_pc [gdb_readexpr "(unsigned long) \$pc"]; -if { $save_pc == -1 } then { - fail "could not read PC" - return; -} - -# 8.7 tfind start -## check $trace_frame == 0 -gdb_tfind_test "8.7: tfind start command" "start" "0"; -## check $pc != startPC -gdb_test "printf \"x \%d x\\n\", \$pc != $save_pc" \ - "x 1 x" \ - "8.7b: tfind start" - -# 8.8 tfind none -## check $trace_frame == -1 -gdb_tfind_test "8.8: tfind none" "none" "-1"; -## check $pc == startPC -gdb_test "printf \"x \%d x\\n\", \$pc == $save_pc" \ - "x 1 x" \ - "8.8b: tfind none (restores non-trace PC)" - -# 8.9 tfind end -## check $trace_frame == -1 -gdb_tfind_test "8.9: tfind end, selects no frame" "end" "-1"; -## check $pc == startPC -gdb_test "printf \"x \%d x\\n\", \$pc == $save_pc" \ - "x 1 x" \ - "8.9b: tfind end (restores non-tracing PC)" - -# 8.1 tfind n -## check $trace_frame == n -gdb_tfind_test "8.1: tfind 1" "1" "1" -## check $trace_line corresponds to tracepoint for frame n -gdb_test "print \$trace_line" "$testline2" "8.1b: tfind 1 (correct line)" - -# 8.28 tfind invalid n (big number) -## check "not found" error -## check $trace_frame != n -gdb_test "tfind 32767" \ - "failed to find.*" \ - "8.28: tfind command rejects invalid frame number" - -gdb_test "printf \"x \%d x\\n\", \$trace_frame == 32767" \ - "x 0 x" \ - "8.28: tfind rejected bad input (32767)" - -# 8.31 tfind negative n -## check error -gdb_test "tfind -3" "invalid input.*" "8.31: tfind rejects negative input" -## check $trace_frame != -n -gdb_test "printf \"x \%d x\\n\", \$trace_frame == -3" "x 0 x" \ - "8.31: tfind rejected negative input (-3)" - -# 8.10 tfind -## check $trace_frame += 1 - -gdb_tfind_test "8.10: tfind start" "start" "0"; -gdb_test "print \$trace_line" "$baseline" \ - "8.10: tfind 0 (correct line $baseline)" -gdb_tfind_test "8.10: tfind noargument 1" "" "1"; -gdb_test "print \$trace_line" "$testline2" \ - "8.10: tfind 1 (correct line $testline2)" -gdb_tfind_test "8.10: tfind noargument 2" "" "2"; -gdb_test "print \$trace_line" "$testline3" \ - "8.10: tfind 2 (correct line $testline3)" -gdb_tfind_test "8.10: tfind noargument 3" "" "3"; -gdb_test "print \$trace_line" "$testline4" \ - "8.10: tfind 3 (correct line $testline4)" - -gdb_tfind_test "8.11: tfind 3" "3" "3"; -gdb_test "print \$trace_line" "$testline4" \ - "8.11: tfind 3 (correct line $testline4)" -gdb_tfind_test "8.11: tfind backward 2" "-" "2"; -gdb_test "print \$trace_line" "$testline3" \ - "8.11: tfind 2 (correct line $testline3)" -gdb_tfind_test "8.11: tfind backward 1" "-" "1"; -gdb_test "print \$trace_line" "$testline2" \ - "8.11: tfind 1 (correct line $testline2)" -gdb_tfind_test "8.11: tfind backward 0" "-" "0"; -gdb_test "print \$trace_line" "$baseline" \ - "8.11: tfind 0 (correct line $baseline)" - -gdb_tfind_test "8.12: tfind none" "none" "-1"; -gdb_tfind_test "8.12: tfind tracepoint " "tracepoint $tdp2" \ - "\$tracepoint" "$tdp2"; -gdb_test "print \$trace_line" "$testline2" \ - "8.12: tfind tracepoint (line $testline2)" - -gdb_tfind_test "8.25: tfind none" "none" "-1"; -gdb_test "tfind tracepoint 0" "failed to find.*" \ - "8.25: tfind tracepoint rejects zero" -gdb_test "tfind tracepoint 32767" "failed to find.*" \ - "8.25: tfind tracepoint rejects nonexistant tracepoint (32767)" -gdb_test "tfind tracepoint -1" "failed to find.*" \ - "8.25: tfind tracepoint rejects nonexistant tracepoint (-1)" - -# 8.37 tfind tracepoint n where n no longer exists (but used to) -gdb_test "delete trace $tdp2" "" "" -gdb_tfind_test "8.37: tfind none" "none" "-1"; -gdb_tfind_test "8.37: tfind deleted tracepoint" \ - "tracepoint $tdp2" \ - "\$tracepoint" "$tdp2"; -gdb_test "print \$trace_line" "$testline2" \ - "8.37: tfind deleted tracepoint (line $testline2)" - -# 8.13 tfind tracepoint -## check $tracepoint same before and after, $trace_frame changed - -gdb_tfind_test "8.13: tfind none" "none" "-1"; -gdb_tfind_test "8.13: tracepoint $tdp1" "tracepoint $tdp1" \ - "\$tracepoint" "$tdp1"; -gdb_test "print \$trace_line" "$baseline" \ - "8.13: tfind tracepoint $tdp1 (line $baseline)" -gdb_test "set \$save_frame = \$trace_frame" "" "" -gdb_tfind_test "8.13: tracepoint " "tracepoint" \ - "\$tracepoint" "$tdp1"; -gdb_test "printf \"x \%d x\\n\", \$trace_frame == \$save_frame" \ - "x 0 x" \ - "8.13: tracepoint , tracepoint number unchanged"] - -# 1.12 set tracepoint in prologue -# -# tdp1 was set at *gdb_recursion_test (ie. the hard address of the -# function, before the prologue). Test to see that it succeeded. -# Current pc should be equal to the address of the function. - -gdb_test "printf \"x \%d x\\n\", \$pc == gdb_recursion_test" \ - "x 1 x" \ - "1.12: set tracepoint in prologue" - -# 8.14 tfind pc x -## check pc == x, $trace_frame != -1 -gdb_tfind_test "8.14: tfind 3" "3" "3" -gdb_test "print \$trace_line" "$testline4" \ - "8.14: tfind 3 (line $testline4)" - -gdb_test "set \$test_pc = \$pc" "" "" -gdb_tfind_test "8.14: tfind none" "none" "-1" -gdb_tfind_test "8.14: tfind pc" "pc \$test_pc" "\$trace_frame != -1" "1"; -gdb_test "print \$trace_line" "$testline4" \ - "8.14: tfind pc x (line $testline4)" -gdb_test "printf \"x \%d x\\n\", \$pc == \$test_pc" \ - "x 1 x" \ - "8.14: tfind pc x" - -# 8.15 tfind pc -## check pc same before and after, $trace_frame changed -gdb_tfind_test "8.15: tfind 3" "3" "3" -gdb_test "print \$trace_line" "$testline4" \ - "8.15: tfind 3 (line $testline4)" -gdb_test "set \$test_pc = \$pc" "" "" -gdb_tfind_test "8.15: tfind pc" "pc" "\$pc == \$test_pc" "1" -gdb_test "print \$trace_line" "$testline4" \ - "8.15: tfind pc (line $testline4)" -gdb_test "printf \"x \%d x\\n\", \$trace_frame != 3" "x 1 x" \ - "8.15: trace frame didn't change" - -# 8.26 tfind pc invalid x -## check error, pc != x (trace_frame unchanged?) -gdb_tfind_test "8.26: tfind start" "start" "0" -gdb_test "tfind pc 0" "failed to find.*" "8.26: tfind pc zero" -gdb_test "tfind pc -1" "failed to find.*" "8.26: tfind pc -1" - -# 8.16 tfind line n -## check #trace_frame != -1, $trace_line == n -gdb_tfind_test "8.16: tfind none" "none" "-1" -gdb_tfind_test "8.16: tfind line $testline3" \ - "line $testline3" \ - "\$trace_line == $testline3" "1" - -# 8.17 tfind line (# 8.19, 8.20) -## check $trace_line changed, no error, pc changed, frame changed, tdp changed -gdb_tfind_test "8.17: tfind none" "none" "-1" -gdb_tfind_test "8.17: tfind line $testline3" "line $testline3" "\$trace_line == $testline3" "1" -gdb_tfind_test "8.17: tfind line " "line" "\$trace_line != $testline3" "1" - -# 8.36 tfind and disassembly -gdb_tfind_test "8.36: tfind start" "start" "0" -set timeout 60 -send_gdb "disassemble gdb_c_test\n" -# look for disassembly of function label -gdb_expect { - -re ":.*$gdb_prompt $" { pass "8.36: trace disassembly" } - -re ".*$gdb_prompt $" { fail "8.36: trace disassembly" } - timeout { fail "8.36: trace disassembly (timeout)" } -} - -gdb_test "tfind line 0" \ - "out of range.*|failed to find.*" \ - "8.18: tfind line 0"; -gdb_test "tfind line 32767" \ - "out of range.*|failed to find.*" \ - "8.27: tfind line 32767"; -gdb_test "tfind line NoSuChFiLe.c:$baseline" \ - "No source file named.*" \ - "8.27: tfind line in bad source file"; - -# 8.32 tfind invalid subcommand (tfind foo) -## check error -gdb_test "tfind NoSuChOpTiOn 21" \ - "No symbol.*|\[Ww\]arning.*|\[Ee\]rror.*" \ - "8.32: tfind with bad subcommand" - -# 8.38 test help tfind -gdb_test "help tfind" "Select a trace frame.*" \ - "8.38: help tfind" -gdb_test "help tfind pc" "Select a trace frame by PC.*" \ - "8.38: help tfind PC" -gdb_test "help tfind end" "Synonym for 'none'.*" \ - "8.38: help tfind end" -gdb_test "help tfind none" "De-select any trace frame.*" \ - "8.38: help tfind none" -gdb_test "help tfind line" "Select a trace frame by source line.*" \ - "8.38: help tfind line" -gdb_test "help tfind start" "Select the first trace frame.*" \ - "8.38: help tfind start" -gdb_test "help tfind range" "Select a trace frame whose PC is in.*" \ - "8.38: help tfind range" -gdb_test "help tfind trace" "Select a trace frame by tracepoint number.*" \ - "8.38: help tfind tracepoint" - -# Finished! -gdb_tfind_test "8.17: tfind none" "none" "-1" -- cgit v1.1