| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We don't need to enforce larger target settings when the only thing
the sim should care about is the CPU target. So reduce most of the
target matches to only check the CPU.
|
|
This drops support for the --enable-sim-float configure option,
but it's not clear anyone ever actually used that. Eventually
we'll want this to be a runtime option anyways.
|
|
Since the msb value is always defined as the wordsize-1, stop
hardcoding that value directly, and use a CPP value instead.
|
|
We want to kill off mips/configure entirely. Move this small part
out now to get started.
|
|
Don't assume that the default bfd that we configured for is the one
that is always active when running a program. We already have access
to the real runtime value, so use it directly. This simplifies the
code quite a bit, and will make it easier to support multiple mach's
in a single binary.
|
|
We need these in the top-level to generate libsim.a, but also in the
subdirs to generate hw-config.h. Move it to the local.mk, and pass
it down when running recursive make. This avoids duplication, and
makes it available to both. We can simplify this once we move the
various steps up to the top-level too.
|
|
All ports should be migrated now. Drop the SIM_HAVE_COMMON_SIM_CPU
knob and require it be used everywhere now.
|
|
|
|
The intention of this code seems to be to indicate that this insn
should not be used and produces undefined behavior, so instead of
setting registers to bogus values, call Unpredictable. This fixes
build warnings due to 32-bit/64-bit type conversions, and outputs
a log message for users at runtime instead of silent corruption.
Bug: https://sourceware.org/PR29276
|
|
Automake will run each subdir individually before moving on to the next
one. This means that the linking phase, a single threaded process, will
not run in parallel with anything else. When we have to link ~32 ports,
that's 32 link steps that don't take advantage of parallel systems. On
my really old 4-core system, this cuts a multi-target build from ~60 sec
to ~30 sec. We eventually want to move all compile+link steps to this
common dir anyways, so might as well move linking now for a nice speedup.
We use noinst_PROGRAMS instead of bin_PROGRAMS because we're taking care
of the install ourselves rather than letting automake process it.
|
|
The configure code always defaults to HARD_FLOATING_POINT, so inline
that value and drop redundant target checks as a result.
|
|
When reading/writing arbitrary data to the system's memory, the unsigned
char pointer type doesn't make that much sense. Switch it to void so we
align a bit with standard C library read/write functions, and to avoid
having to sprinkle casts everywhere.
|
|
These functions only read from memory, so mark the pointer as const.
|
|
When reading/writing arbitrary data to the system's memory, the unsigned
char pointer type doesn't make that much sense. Switch it to void so we
align a bit with standard C library read/write functions, and to avoid
having to sprinkle casts everywhere.
|
|
These configure scripts check $target and change behavior. They
shouldn't be doing that, but until we can rework the sim to change
behavior based on the input ELF, restore AC_CANONICAL_SYSTEM to
these so that $target is correctly populated.
This was lost in the d3562f83a7b8a1ae6e333cd5561419d3da18fcb4
("sim: unify toolchain probing logic") refactor as the logic was
hoisted up to the common code. But the fact the vars weren't
passed down to the sub-configure scripts was missed.
Bug: https://sourceware.org/PR29439
|
|
PTR will soon disappear from ansidecl.h. Remove uses in sim. Where
a PTR cast is used in assignment or function args to a void* I've
simply removed the unnecessary (in C) cast rather than replacing with
(void *).
|
|
This was left in subdirs because of the dynamic cgen usage. However,
we can move this breakpoint call to runtime and let gdb detect whether
the symbol exists.
|
|
2022-02-01 Ali Lown <ali.lown@imgtec.com>
Andrew Bennett <andrew.bennett@imgtec.com>
Dragan Mladjenovic <dragan.mladjenovic@rt-rk.com>
Faraz Shahbazker <fshahbazker@wavecomp.com>
sim/common/ChangeLog:
* sim-bits.h (EXTEND9, EXTEND18 ,EXTEND19, EXTEND21,
EXTEND26): New macros.
sim/mips/ChangeLog:
* Makefile.in (IGEN_INCLUDE): Add mips3264r6.igen.
* configure: Regenerate.
* configure.ac: Support mipsisa32r6 and mipsisa64r6.
(sim_engine_run): Pick simulator model from processor specified
in e_flags.
* cp1.c (value_fpr): Handle fmt_dc32.
(fp_unary, fp_binary): Zero initialize locals.
(update_fcsr, fp_classify, fp_rint, fp_r6_cmp, inner_fmac,
fp_fmac, fp_min, fp_max, fp_mina, fp_maxa, fp_fmadd, fp_fmsub):
New functions.
(sim_fpu_class_mips_mapping): New.
* cp1.h (fcsr_ABS2008_mask, fcsr_ABS2008_shift): New define.
* interp.c (MIPSR6_P): New.
(load_word): Allow unaligned memory access for MIPSR6.
* micromips.igen (sc, scd): Adapt to new do_sc* helper signature.
* mips.igen: Add *r6 models.
(signal_if_cti, forbiddenslot32): New helpers.
(delayslot32): Use signal_if_cti.
(do_sc, do_scd); Add store_ll_bit parameter.
(sc, scd): Adapt to previous change.
(nal, beq, bal): New definitions for *r6.
(sll): Split nop and ssnop cases into ...
(nop, ssnop): New definitions.
(loadstore_ea): Use the 32-bit compatibility adressing.
(cache): Split logic into ...
(do_cache): New helper.
(check_fpu): Select IEEE 754-2008 mode for R6.
(not_word_value, unpredictable, check_mt_hilo, check_mf_hilo,
check_multi_hilo, check_div_hilo, check_u64, do_dmfc1b, add,
li, addu, and, andi, bgez, bgtz, blez, bltz, bne, break, dadd,
daddiu, daddu, dror, dror32, drorv, dsll, dsll32, dsllv, dsra,
dsra32, dsrav, dsrl, dsrl32, dsub, dsubu, j, jal, jalr,
jalr.hb, lb, lbu, ld, lh, lhu, lui, lw, lwu, nor, or, ori, ror,
rorv, sb, sd, sh, sll, sllv, slt, slti, sltiu, sltu, sra, srav,
srl, srlv, sub, subu, sw, sync, syscall, teq, tge, tgeu, tlt,
tltu, tne, xor, xori, check_fmt_p, do_load_double,
do_store_double, abs.FMT, add.FMT, ceil.l.FMT, ceil.w.FMT,
cfc1, ctc1, cvt.d.FMT, cvt.l.FMT, cvt.w.FMT, div.FMT, dfmc1,
dmtc1, floor.l.FMT, floor.w.FMT, ldc1, lwc1, mfc1, mov.FMT,
mtc1, mul.FMT, recip.FMT, round.l.FMT, round.w.FMT, rsqrt.FMT,
sdc1, sqrt.FMT, sub.FMT, swc1, trunc.l.FMT, trunc.w.FMT, bc0f,
bc0fl, bc0t, bc0tl, dmfc0, dmtc0, eret, mfc0, mtc0, cop, tlbp,
tlbr, tlbwi, tlbwr): Enable on *r6 models.
* mips3264r2.igen (dext, dextm, dextu, di, dins, dinsm, dinsu,
dsbh, dshd, ei, ext, mfhc1, mthc1, ins, seb, seh, synci, rdhwr,
wsbh): Likewise.
* mips3264r6.igen: New file.
* sim-main.h (FP_formats): Add fmt_dc32.
(FORBIDDEN_SLOT): New macros.
(simFORBIDDENSLOT, FP_R6CMP_*, FP_R6CLASS_*): New defines.
(fp_r6_cmp, fp_classify, fp_rint, fp_min, fp_max, fp_mina,
fp_maxa, fp_fmadd, fp_fmsub): New declarations.
(R6Compare, Classify, RoundToIntegralExact, Min, Max, MinA,
MaxA, FusedMultiplyAdd, FusedMultiplySub): New macros. Wrapping
previous declarations.
sim/testsuite/mips/ChangeLog:
* basic.exp: Add r6-*.s tests.
(run_r6_removed_test): New function.
(run_endian_tests): New function.
* hilo-hazard-3.s: Skip for mips*r6.
* r2-fpu.s: New test.
* r6-64.s: New test.
* r6-branch.s: New test.
* r6-forbidden.s: New test.
* r6-fpu.s: New test.
* r6-llsc-dp.s: New test.
* r6-llsc-wp.s: New test.
* r6-removed.csv: New test.
* r6-removed.s: New test.
* r6.s: New test.
* utils-r6.inc: New inc.
|
|
IEEE754-1985 specifies the top bit of the mantissa as an indicator
of signalling vs. quiet NaN, but does not define the precise semantics.
Most architectures treat this bit as indicating quiet NaN, but legacy
(pre-R6) MIPS goes the other way and treats it as signalling NaN.
This used to be controlled by a macro that was only defined for MIPS.
This patch replaces the macro with a variable to track the current
semantics of the NaN bit and allows differentiation between older
(pre-R6) and and newer MIPS cores.
2022-02-01 Faraz Shahbazker <fshahbazker@wavecomp.com>
sim/common/ChangeLog:
* sim-fpu.c (_sim_fpu): New.
(pack_fpu, unpack_fpu): Allow reversal of quiet NaN semantics.
* sim-fpu.h (sim_fpu_state): New struct.
(_sim_fpu): New extern.
(sim_fpu_quiet_nan_inverted): New define.
sim/mips/ChangeLog:
* cp1.h (fcsr_NAN2008_mask, fcsr_NAN2008_shift): New.
* mips.igen (check_fpu): Select default quiet NaN mode
for legacy MIPS.
* sim-main.h (SIM_QUIET_NAN_NEGATED): Remove.
|
|
Move off the sim-specific unsignedXX types and to the standard uintXX_t
types that C11 provides.
|
|
This doesn't fix all the problems, but grabs a bunch of the more
obvious ones.
|
|
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
|
|
These are just using the default behavior for the 3rd arg, so drop
it to make it more clear. This also makes them match all other
ports that only use the first 2 arguments.
|
|
Now that all ports have switched to target-newlib-* files, there's
no need for these files & generating things at build time. So punt
the logic and make target-newlib-syscall a hard requirement.
|
|
Some C libraries export _P symbols in their headers (like older
newlib and its ctype.h), so use P_ instead to avoid conflicts.
|
|
We use the program argv to both find the program to run (argv[0]) and
to hold the arguments to the program. Most of the time this is fine,
but if we want to let programs specify argv[0] independently (which is
possible in standard *NIX programs), this double duty doesn't work.
So let's split the path to the program to run out into a separate
field by itself. This simplifies the various sim_open funcs too.
By itself, this code is more of a logical cleanup than something that
is super useful. But it will open up customization of argv[0] in a
follow up commit. Split the changes to make it easier to review.
|
|
Since the first argument type is unsigned32 or unsigned64, just use
sim_fpu_to{32,64}u instead of sim_fpu_to{32,64}i to fix the following
build warnings:
CC cp1.o
.../sim/mips/cp1.c: In function 'convert':
.../sim/mips/cp1.c:1425:32: warning: pointer targets in passing argument 1 of 'sim_fpu_to32i' differ in signedness [-Wpointer-sign]
status |= sim_fpu_to32i (&result32, &wop, round);
^~~~~~~~~
In file included from .../sim/mips/sim-main.h:67,
from .../sim/mips/cp1.c:46:
.../sim/mips/../common/sim-fpu.h:270:22: note: expected 'signed32 *' {aka 'int *'} but argument is of type 'unsigned32 *' {aka 'unsigned int *'}
INLINE_SIM_FPU (int) sim_fpu_to32i (signed32 *i, const sim_fpu *f,
^~~~~~~~~~~~~
.../sim/mips/cp1.c:1429:32: warning: pointer targets in passing argument 1 of 'sim_fpu_to64i' differ in signedness [-Wpointer-sign]
status |= sim_fpu_to64i (&result64, &wop, round);
^~~~~~~~~
In file included from .../sim/mips/sim-main.h:67,
from .../sim/mips/cp1.c:46:
.../sim/mips/../common/sim-fpu.h:274:22: note: expected 'signed64 *' {aka 'long int *'} but argument is of type 'unsigned64 *' {aka 'long unsigned int *'}
INLINE_SIM_FPU (int) sim_fpu_to64i (signed64 *i, const sim_fpu *f,
^~~~~~~~~~~~~
.../sim/mips/cp1.c: In function 'convert_ps':
.../sim/mips/cp1.c:1528:34: warning: pointer targets in passing argument 1 of 'sim_fpu_to32i' differ in signedness [-Wpointer-sign]
status_u |= sim_fpu_to32i (&res_u, &wop_u, round);
^~~~~~
In file included from .../sim/mips/sim-main.h:67,
from .../sim/mips/cp1.c:46:
.../sim/mips/../common/sim-fpu.h:270:22: note: expected 'signed32 *' {aka 'int *'} but argument is of type 'unsigned32 *' {aka 'unsigned int *'}
INLINE_SIM_FPU (int) sim_fpu_to32i (signed32 *i, const sim_fpu *f,
^~~~~~~~~~~~~
.../sim/mips/cp1.c:1529:34: warning: pointer targets in passing argument 1 of 'sim_fpu_to32i' differ in signedness [-Wpointer-sign]
status_l |= sim_fpu_to32i (&res_l, &wop_l, round);
^~~~~~
In file included from .../sim/mips/sim-main.h:67,
from .../sim/mips/cp1.c:46:
.../sim/mips/../common/sim-fpu.h:270:22: note: expected 'signed32 *' {aka 'int *'} but argument is of type 'unsigned32 *' {aka 'unsigned int *'}
INLINE_SIM_FPU (int) sim_fpu_to32i (signed32 *i, const sim_fpu *f,
^~~~~~~~~~~~~
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
|
|
The multi-run logic for mips involves a bit of codegen and rewriting
of files to include per-architecture prefixes. That can result in
files with missing prototypes which cause compiler errors. In the
case of mips-sde-elf targets, we have:
$srcdir/m16run.c -> $builddir/m16mips64r2_run.c
sim_engine_run -> m16mips64r2_engine_run
$srcdir/micromipsrun.c -> micromipsmicromips_run.c
sim_engine_run -> micromips64micromips_engine_run
micromipsmicromips_run.c:80:1: error: no previous prototype for 'micromips64micromips_engine_run' [-Werror=missing-prototypes]
80 | micromips64micromips_engine_run (SIM_DESC sd, int next_cpu_nr, int nr_cpus,
We generate headers for those prototypes in the configure script,
but only include them in the generated multi-run.c file. Update the
rewrite logic to turn the sim-engine.h include into the relevant
generated engine include so these files also have their prototypes.
$srcdir/m16run.c -> $builddir/m16mips64r2_run.c
sim-engine.h -> m16mips64r2_engine.h
$srcdir/micromipsrun.c -> micromipsmicromips_run.c
sim-engine.h -> micromips64micromips_engine.h
|
|
Fix a few printf warnings in sim-main.c, and then we're left with only
one file in here still generating warnings, so reduce the -Werror
disable to that alone now that we require GNU make and can set variables
on a per-object basis.
|
|
Add a new stamp helper for quiet builds, and don't dump the command
line options when it runs. That isn't standard tool behavior, and
doesn't really seem necessary in any way.
|
|
We pretty much never care about these stamp touches, so silence them.
Also switch to using $@ when it makes sense.
|
|
Use the srcroot path and make them all silent.
|
|
The common/Make-common.in fragment already provides these variables.
|
|
It's unclear what this define is for as it appears to be unused, and
has never been used in the history of the mips sim. Delete it to tidy
up, and to fix build errors for Windows targets that have a standard
"PSIZE" struct in their system headers. This doesn't show up yet as
most sim files don't include many system headers, but enabling sockser
code for mingw uncovers the conflict.
Unfortunately the error produced by gcc is inscrutable, but running
it through the preprocessor manually manages to provide a pointer to
the underlying issue.
$ i686-w64-mingw32-gcc ... -c -o dv-sockser.o ../../../../sim/mips/../common/dv-sockser.c
<command-line>: error: expected identifier or '(' before numeric constant
In file included from /usr/i686-w64-mingw32/usr/include/windows.h:71,
from /usr/i686-w64-mingw32/usr/include/winsock2.h:23,
from ../../gnulib/import/sys/socket.h:684,
from ../../gnulib/import/netinet/in.h:43,
from ../../../../sim/mips/../common/dv-sockser.c:39:
/usr/i686-w64-mingw32/usr/include/wingdi.h:2934:59: error: unknown type name 'LPSIZE'; did you mean 'LPSIZEL'?
2934 | WINGDIAPI WINBOOL WINAPI GetAspectRatioFilterEx(HDC hdc,LPSIZE lpsize);
| ^~~~~~
| LPSIZEL
...
$ i686-w64-mingw32-gcc ... -E -dD -o dv-sockser.i ../../../../sim/mips/../common/dv-sockser.c
$ i686-w64-mingw32-gcc -c dv-sockser.i
In file included from /usr/i686-w64-mingw32/usr/include/windows.h:69,
from /usr/i686-w64-mingw32/usr/include/winsock2.h:23,
from ../../gnulib/import/sys/socket.h:684,
from ../../gnulib/import/netinet/in.h:43,
from ../../../../sim/mips/../common/dv-sockser.c:39:
/usr/i686-w64-mingw32/usr/include/windef.h:104:9: error: expected identifier or '(' before numeric constant
104 | } SIZE,*PSIZE,*LPSIZE;
| ^~
|
|
Now that ChangeLog entries are no longer used for sim patches,
this commit renames all relevant sim ChangeLog to ChangeLog-2021,
similar to what we would do in the context of the "Start of New
Year" procedure.
The purpose of this change is to avoid people merging ChangeLog
entries by mistake when applying existing commits that they are
currently working on.
Also throw in a .gitignore entry to keep people from adding new
ChangeLog files anywhere in the sim tree.
|
|
Move these options up to the common dir so we only test & export
them once across all ports.
The setting only affects igen based ports, and they were turning
this on by default, so keep the default in place.
|
|
The cgen scache module is enabled by every cgen port, and with the
same default value of 16k (which matches the common default value).
Let's pull this option out of the individual ports (via CPPFLAGS)
and into the common code (via config.h).
The object itself is compiled only for cgen ports atm, so that part
doesn't change. The scache code is initialized dynamically via the
modules.c logic. That's why the profile code needs an additional
CGEN_ARCH check.
This will allow us to collapse arch configure files more. Merging
the source files will require more future work, but integrating the
cgen & non-cgen worlds itself will take a lot.
|
|
This kills off another compile-time option by moving the setting to
the individual arch runtimes. This will allow dynamic selection by
the arch when doing a single build with multiple arches.
The sim_model_init rework is a little funky. In the past it was
disabled entirely if no default model was set. We maintain the
spirit of the logic by gating the fallback logic on whether the
port has defined any models.
|
|
These ports only use the pieces that have been unified, so we can
merge them into the common configure script and get rid of their
unique one entirely.
We still compile & link separate run programs, and have dedicated
subdir Makefiles, but the configure script portion is merged.
|
|
Move these options up to the common dir so we only test & export
them once across all ports.
|
|
The sim-hardware configure option allows builders to select a set of
device models to enable. But this seems like unnecessary overkill:
the existence of individual device models doesn't affect performance
at all as they are only enabled at runtime if the config uses them,
and individually these are all <5KB a piece. Stripping off a total
of ~50KB from a ~1MB binary doesn't seem useful, and it's extremely
unlikely anyone will ever bother.
So let's simplify the configure/make logic by turning sim-hardware
into a boolean option like many of the other sim options. Any ports
that have unique device models will declare them in their Makefile
instead of at configure time. This will allow us to (eventually)
unify the setting into the common dir.
|
|
Now that we've moved all content out to the common file, this is
empty and can be deleted it entirely.
|
|
Move these options up to the common dir so we only test & export
them once across all ports. This takes a page from the cgen maint
logic to make $(MAINT) work for non-automake Makefiles which will
allow us to merge it together.
|
|
This will allow us to build the common code with the same inline
settings as the arch subdirs, and only do the test once.
|
|
Move these options up to the common dir so we only test & export
them once across all ports.
|
|
The common dir is already probing this info since it's using automake,
so pass it down to the subdirs so they don't have to probe it at all.
|
|
Move these options up to the common dir so we only test & export
them once across all ports.
|
|
Move these options up to the common dir so we only test & export
them once across all ports.
|
|
We don't use anything from X, so no sense in probing the env.
|
|
Move these options up to the common dir so we only test & export
them once across all ports.
|
