aboutsummaryrefslogtreecommitdiff
path: root/opcodes/mips-dis.c
AgeCommit message (Collapse)AuthorFilesLines
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-12-23MIPS16: Simplify extended operand handlingMaciej W. Rozycki1-19/+17
Simplify extended operand handling and only specially process immediates which require bit shuffling, using the generic operand insertion and extraction handlers for the '<' (5-bit shift amount) operand code in particular. Require the least significant bit of all extended operand forms to be (artificially) set to 0 for their special processing to trigger. gas/ * config/tc-mips.c (mips16_immed): Limit `mips16_immed_extend' use to operands whose LSB position is zero. opcodes/ * mips-dis.c (print_mips16_insn_arg): Simplify processing of extended operands. * mips16-opc.c (decode_mips16_operand): Switch the extended form of the `<' operand type to LSB position 22.
2016-12-23MIPS16: Handle non-extensible instructions correctlyMaciej W. Rozycki1-0/+1
Identify non-extensible instructions in the MIPS16 opcode table and disallow their use with the `.e' instruction size suffix in assembly and do not interpret any EXTEND prefix present as a part of the instruction in disassembly. According to all versions of the MIPS16 ASE specifications the following instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R, I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e ASE specifications it has been further clarified what was previously implied, that non-extesiable instructions when preceded with an EXTEND prefix must cause a Reserved Instruction exception [3][5]. Therefore in the presence of an EXTEND prefix none of these instructions are supposed to be handled as extended instructions and supporting these forms in disassembly causes confusion, and in the case of the RRR major opcode it also clashes with the ASMACRO encoding. References: [1] "Product Description, MIPS16 Application-Specific Extension", Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16 Instruction Set Summary", p. 5 [2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10 [3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00076, Revision 2.63, July 16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39 [4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49 [5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e Application-Specific Extension to the MIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00077, Revision 2.60, June 25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41 [6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51 include/ * opcode/mips.h (INSN2_SHORT_ONLY): New macro. gas/ * config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix instruction size override for INSN2_SHORT_ONLY opcode table entries. * testsuite/gas/mips/mips16-extend-swap.d: Adjust output. * testsuite/gas/mips/mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error messages. * testsuite/gas/mips/mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test. * testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test. * testsuite/gas/mips/mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr output. * testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr output. * testsuite/gas/mips/mips16-insn-e.s: New test source. * testsuite/gas/mips/mips16-insn-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_insn_mips16): Disallow EXTEND prefix matching for INSN2_SHORT_ONLY opcode table entries. * mips16-opc.c (SH): New macro. (mips16_opcodes): Set SH in `pinfo2' for non-extensible instruction entries: "nop", "addu", "and", "break", "cmp", "daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu", "drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv", "dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j", "jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg", "not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu", "srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb", "seh", "sew", "zeb", "zeh", "zew" and "extend". binutils/ * testsuite/binutils-all/mips/mips16-extend-insn.d: New test. * testsuite/binutils-all/mips/mips16-extend-insn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-23opcodes: Use autoconf to check for `bfd_mips_elf_get_abiflags' in BFDMaciej W. Rozycki1-5/+6
Fix a regression introduced with commit 5e7fc731f80e ("MIPS/opcodes: Also set disassembler's ASE flags from ELF structures"), further updated with commit 4df995c77118 ("MIPS/opcodes: Also set disassembler's ASE flags from ELF structures"), and use autoconf to check for the presence of `bfd_mips_elf_get_abiflags' in BFD. opcodes/ * mips-dis.c (set_default_mips_dis_options): Use HAVE_BFD_MIPS_ELF_GET_ABIFLAGS rather than BFD64 to guard the call to `bfd_mips_elf_get_abiflags'. * configure.ac: Check for `bfd_mips_elf_get_abiflags' in BFD. * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add `libbfd.la'. * aclocal.m4: Regenerate. * configure: Regenerate. * config.in: Regenerate. * Makefile.in: Regenerate.
2016-12-20MIPS16/opcodes: Respect ISA and ASE in disassemblyMaciej W. Rozycki1-1/+4
Limit MIPS16 instruction disassembly according to the ISA level and ASE set selected, as with the regular MIPS and microMIPS instruction sets. Retain the property of `objdump -m mips:16' disassembling all MIPS16 instructions however, regardless of any ISA level recorded in the binary examined. To validate the disassembler use the GAS test suite for its convenience of running tests across multiple ISAs, even though placing the tests in the binutils test suite would be more appropriate. Adjust the single binutils test which depends on 64-bit instruction disassembly to have the ISA level required actually recorded in the binary examined. opcodes/ * mips-dis.c (mips_arch_choices): Use ISA_MIPS64 rather than ISA_MIPS3 as the `isa' selection in the `bfd_mach_mips16' entry. (print_insn_mips16): Check opcode entries for validity against the ISA level and ASE set selected. binutils/ * testsuite/binutils-all/mips/mips16-undecoded.s: Use `.module' rather than `.set' to set the ISA level. gas/ * testsuite/gas/mips/mips16-sub.d: New test. * testsuite/gas/mips/mips16-32@mips16-sub.d: New test. * testsuite/gas/mips/mips16e-32@mips16-sub.d: New test. * testsuite/gas/mips/mips16e-sub.d: New test. * testsuite/gas/mips/mips16-32@mips16e-sub.d: New test. * testsuite/gas/mips/mips16-64@mips16e-sub.d: New test. * testsuite/gas/mips/mips16e-64-sub.d: New test. * testsuite/gas/mips/mips16-32@mips16e-64-sub.d: New test. * testsuite/gas/mips/mips16-64@mips16e-64-sub.d: New test. * testsuite/gas/mips/mips16e-32@mips16e-64-sub.d: New test. * testsuite/gas/mips/mips16-sub.s: New test source. * testsuite/gas/mips/mips16e-sub.s: New test source. * testsuite/gas/mips/mips16e-64-sub.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests.
2016-12-20MIPS16: Switch to 32-bit opcode table interpretationMaciej W. Rozycki1-78/+74
Switch to 32-bit MIPS16 opcode table entry interpretation, similar to how the microMIPS opcode table is handled, for both the `match' and `mask' fields, removing special casing for JAL and JALX instructions and their `a' and `i' operand codes throughout, while retaining automatic processing of extendable opcodes in assembly and disassembly. In assembly disallow size enforcement suffixes as appropriate: `.t' for both 32-bit instructions and macros and `.e' for macros only, making macro handling consistent with the microMIPS instruction set. In disassembly fully decode EXTEND prefixes prepended to unsupported instruction encodings (according to the ISA selection) rather than dumping them as hexadecimal data along with the following instruction, removing all special casing for the EXTEND prefix and making its handling rely on its opcode table entry, except where it is considered a part of an extendable instruction. include/ * opcode/mips.h (mips_opcode_32bit_p): New inline function. gas/ * config/tc-mips.c (micromips_insn_length): Use `mips_opcode_32bit_p'. (is_size_valid): Adjust description. (is_size_valid_16): New function. (validate_mips_insn): Use `mips_opcode_32bit_p' in MIPS16 operand decoding. (validate_mips16_insn): Remove `a' and `i' operand code special casing, use `mips_opcode_32bit_p' to determine instruction width. (append_insn): Adjust forced MIPS16 instruction size determination. (match_mips16_insn): Likewise. Don't shift the instruction's opcode with the `a' and `i' operand codes. Use `mips_opcode_32bit_p' in operand decoding. (match_mips16_insns): Check for forced instruction size's validity. (mips16_ip): Don't force instruction size in the `noautoextend' mode. * testsuite/gas/mips/mips16-jal-e.d: New test. * testsuite/gas/mips/mips16-jal-t.d: New test. * testsuite/gas/mips/mips16-macro-e.d: New test. * testsuite/gas/mips/mips16-macro-t.d: New test. * testsuite/gas/mips/mips16-jal-t.l: New stderr output. * testsuite/gas/mips/mips16-macro-e.l: New stderr output. * testsuite/gas/mips/mips16-macro-t.l: New stderr output. * testsuite/gas/mips/mips16-jal-e.s: New test source. * testsuite/gas/mips/mips16-jal-t.s: New test source. * testsuite/gas/mips/mips16-macro-e.s: New test source. * testsuite/gas/mips/mips16-macro-t.s: New test source. * testsuite/gas/mips/mips.exp: Run the new tests. opcodes/ * mips-dis.c (print_mips16_insn_arg): Always handle `extend' and `insn' together, with `extend' as the high-order 16 bits. (match_kind): New enum. (print_insn_mips16): Rework for 32-bit instruction matching. Do not dump EXTEND prefixes here. * mips16-opc.c (mips16_opcodes): Move "extend" entry to the end. Recode `match' and `mask' fields as 32-bit in absolute "jal" and "jalx" entries. binutils/ * testsuite/binutils-all/mips/mips16-extend-noinsn.d: Adjust test for separate EXTEND prefix disassembly.
2016-12-19MIPS/opcodes: Only examine ELF file structures if SYMTAB_AVAILABLEMaciej W. Rozycki1-1/+1
Correct commit 640c0ccdc980 ("some objdump -M options, better reg dumps"), <https://sourceware.org/ml/binutils/2002-12/msg00706.html>, and only execute code setting up disassembler options based on ELF file structures if SYMTAB_AVAILABLE is set. opcodes/ * mips-dis.c (set_default_mips_dis_options) [SYMTAB_AVAILABLE]: Only examine ELF file structures here.
2016-12-19MIPS/opcodes: Only call `bfd_mips_elf_get_abiflags' if BFD64Maciej W. Rozycki1-2/+9
Complement commit 5e7fc731f80e ("MIPS/opcodes: Also set disassembler's ASE flags from ELF structures") and fix an `--enable-targets=all' GDB build regression on 32-bit hosts where the MIPS target is a secondary: ../opcodes/libopcodes.a(mips-dis.o): In function `set_default_mips_dis_options': mips-dis.c:(.text+0x906): undefined reference to `bfd_mips_elf_get_abiflags' collect2: error: ld returned 1 exit status make[2]: *** [gdb] Error 1 by avoiding making a call to the `bfd_mips_elf_get_abiflags' function, which is not available, because there is no MIPS/ELF BFD included in 32-bit BFD builds. This call is only made from a conditional code block guarded by a check against `bfd_target_elf_flavour', which is dead in such a configuration, however cannot be optimized away by the compiler. Also some other MIPS BFDs may be available, such as a.out, ECOFF or PE, so the disassembler has to remain functional. opcodes/ * mips-dis.c (set_default_mips_dis_options) [BFD64]: Only call `bfd_mips_elf_get_abiflags' here.
2016-12-14MIPS/opcodes: Also set disassembler's ASE flags from ELF structuresMaciej W. Rozycki1-2/+42
Respect any ASE flags recorded in ELF file structures for the purpose of selecting instructions to be disassembled, preventing code from being hex-dumped even though having been clearly indicated as valid at the assembly time. Use date from the MIPS ABI flags structure if present, and otherwise there may be an MDMX ASE flag set in the ELF file header. For backwards compatibility only set extra flags and do not clear any, preserving all previously set by the architecture selected to be disassembled for. include/ * elf/mips.h (Elf_Internal_ABIFlags_v0): Also declare struct typedef as `elf_internal_abiflags_v0'. bfd/ * bfd-in.h (elf_internal_abiflags_v0): New struct declaration. (bfd_mips_elf_get_abiflags): New prototype. * elfxx-mips.c (bfd_mips_elf_get_abiflags): New function. * bfd-in2.h: Regenerate. opcodes/ * mips-dis.c (mips_convert_abiflags_ases): New function. (set_default_mips_dis_options): Also infer ASE flags from ELF file structures. binutils/ * testsuite/binutils-all/mips/mips-ase-1.d: New test. * testsuite/binutils-all/mips/mips-ase-2.d: New test. * testsuite/binutils-all/mips/mips-ase-3.d: New test. * testsuite/binutils-all/mips/mips-ase-1.s: New test source. * testsuite/binutils-all/mips/mips-ase-2.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests.
2016-12-14MIPS/opcodes: Reorder ELF file header flag handling in disassemblerMaciej W. Rozycki1-13/+13
Move ELF file header flag interpretation code, used to set disassembler options, beyond architecture setup. No functional change as the effects of both code sections are disjoint from each other, but this provides for a further expansion of ELF file header flag interpretation. opcodes/ * mips-dis.c (set_default_mips_dis_options): Reorder ELF file header flag interpretation code.
2016-12-09MIPS16/opcodes: Reformat raw EXTEND and undecoded outputMaciej W. Rozycki1-4/+4
Use a tab rather than a space to separate `extend' and its uninterpreted argument output, like with regular instructions. Separate hexadecimal halves of undecoded extended instructions output with a space instead of presenting them concatenated. opcodes/ * mips-dis.c (print_insn_mips16): Use a tab rather than a space to separate `extend' and its uninterpreted argument output. Separate hexadecimal halves of undecoded extended instructions output. binutils/ * testsuite/binutils-all/mips/mips16-extend-noinsn.d: New test. * testsuite/binutils-all/mips/mips16-extend-noinsn.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new test.
2016-12-08MIPS16/opcodes: Fix off-by-one indentation in `print_mips16_insn_arg'Maciej W. Rozycki1-30/+30
opcodes/ * mips-dis.c (print_mips16_insn_arg): Remove extraneous indentation space across.
2016-12-08MIPS16/opcodes: Fix PC-relative operation delay-slot adjustmentMaciej W. Rozycki1-6/+10
Complement commit dd8b7c222e0e ("MIPS: mips16e jalrc/jrc opcodes"), <https://sourceware.org/ml/binutils/2005-07/msg00349.html>, and stop the disassembler making a delay-slot adjustment for PC-relative operations following either MIPS16e compact jumps, or undefined RR/J(AL)R(C) encodings that have the `l' (link) and `ra' (source register is `ra') bits set both at a time. Adjust code description for accuracy. Add a suitable test case. opcodes/ * mips-dis.c (print_mips16_insn_arg): Avoid delay-slot adjustment for PC-relative operations following MIPS16e compact jumps or undefined RR/J(AL)R(C) encodings. binutils/ * testsuite/binutils-all/mips/mips16-pcrel.d: New test. * testsuite/binutils-all/mips/mips16-pcrel.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new test.
2016-12-07MIPS/opcodes: Correct an `interaction' comment typoMaciej W. Rozycki1-1/+1
opcodes/ * mips-dis.c (print_mips16_insn_arg): Fix comment typo.
2016-12-07MIPS/opcodes: Reformat `-M' disassembler option's help textMaciej W. Rozycki1-5/+6
Align output produced consistently and fix other formatting issues. opcodes/ * mips-dis.c (print_mips_disassembler_options): Reformat output.
2016-05-18MIPS/opcodes: Correct mixed MIPS16 and microMIPS disassemblyMaciej W. Rozycki1-17/+21
Mixing MIPS16 and microMIPS code in a single binary isn't usually supported but GAS happily produces such code if requested. However it is not correctly disassembled even if a symbol table is available and function symbols are correctly anotated with the ISA mode. This is because the ELF-header global microMIPS ASE flag takes precedence over MIPS16 function annotation, causing them to be treated as regular MIPS code. Correct the problem by respecting function symbol anotation regardless of the ELF-header flag. binutils/ * testsuite/binutils-all/mips/mixed-mips16-micromips.d: New test. * testsuite/binutils-all/mips/mixed-mips16-micromips.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new test. opcodes/ * mips-dis.c (is_compressed_mode_p): Add `micromips_p' operand, replacing references to `micromips_ase' throughout. (_print_insn_mips): Don't use file-level microMIPS annotation to determine the disassembly mode with the symbol table.
2016-05-11Add MIPS32 DSPr3 support.Matthew Fortune1-2/+2
bfd/ * elfxx-mips.c (print_mips_ases): Add DSPR3. binutils/ * readelf.c (print_mips_ases): Add DSPR3. gas/ * config/tc-mips.c (options): Add OPTION_DSPR3 and OPTION_NO_DSPR3. (md_longopts): Likewise. (md_show_usage): Add help for -mdspr3 and -mno-dspr3. (mips_ases): Define availability for DSPr3. (mips_ase_groups): Add ASE_DSPR3 to the DSP group. (mips_convert_ase_flags): Map ASE_DSPR3 to AFL_ASE_DSPR3. * doc/as.texinfo: Document -mdspr3, -mno-dspr3. Fix -mdspr2 formatting. * doc/c-mips.texi: Document -mdspr3, -mno-dspr3, .set dspr3 and .set nodspr3. Fix -mdspr2 formatting. * testsuite/gas/mips/mips32-dspr3.d: New file. * testsuite/gas/mips/mips32-dspr3.s: Likewise. * testsuite/gas/mips/mips.exp: Run mips32-dspr3 test. include/ * elf/mips.h (AFL_ASE_DSPR3): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_DSPR3. * opcode/mips.h (ASE_DSPR3): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add ASE_DSPR3 to mips32r6 and mips64r6. * mips-opc.c (D34): New macro. (mips_builtin_opcodes): Define bposge32c for DSPr3.
2016-04-11MIPS/opcodes: Fix undecoded MIPS16 extended instruction bit disassemblyMaciej W. Rozycki1-2/+4
Correct the disassembly of hardware don't cares in MIPS16 extended instructions. Rather than e.g.: 0: f008 0231 addiu v0,sp,16433 4: f520 3260 sll v0,v1,-12 print: 0: f008 0231 addiu v0,sp,16401 4: f520 3260 sll v0,v1,20 respectively instead. opcodes/ * mips-dis.c (print_mips16_insn_arg): Mask unused extended instruction bits out. binutils/ * testsuite/binutils-all/mips/mips16-undecoded.d: New test. * testsuite/binutils-all/mips/mips16-undecoded.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new test.
2016-01-18MIPS: Remove remnants of 48-bit microMIPS instruction supportMaciej W. Rozycki1-35/+1
The POOL48A major opcode was defined in early revisions of the 64-bit microMIPS ISA, has never been implemented, and was removed before the 64-bit microMIPS ISA specification[1] has been finalized. This complements commit a6c7053929dd ("MIPS/opcodes: Remove microMIPS 48-bit LI instruction"). References: [1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64 Instruction Set", MIPS Technologies, Inc., Document Number: MD00594, Revision 3.06, October 17, 2012, Table 6.2 "microMIPS64 Encoding of Major Opcode Field", p. 578 gas/ * config/tc-mips.c (micromips_insn_length): Remove the mention of 48-bit microMIPS instructions. gdb/ * mips-tdep.c (mips_insn_size): Remove 48-bit microMIPS instruction support. (micromips_next_pc): Likewise. (micromips_scan_prologue): Likewise. (micromips_deal_with_atomic_sequence): Likewise. (micromips_stack_frame_destroyed_p): Likewise. (mips_breakpoint_from_pc): Likewise. opcodes/ * mips-dis.c (print_insn_micromips): Remove 48-bit microMIPS instruction support.
2016-01-01Copyright update for binutilsAlan Modra1-1/+1
2015-09-23Fix compile time warnings generated when compiling with clang.Nick Clifton1-12/+0
bfd * bout.c (b_out_slurp_reloc_table): Cast constant to unsigned in order to avoid problems with left shifting negative values. (abs32code): Likewise. * mach-o.c (FILE_ALIGN): Likewise. * coff-rs6000.c (xcoff_debug_sections): Delete unused static array. * elf32-visium.c (visium_reloc_map): Likewise. * elf32-arm.c (elf32_arm_final_link_relocate): Remove useless calls to abs function. * elf32-frv.c (_frvfdpic_relax_tls_entries): Likewise. * elf32-score.c (score_elf_final_link_relocate): Likewise. * elf32-score7.c (score_elf_final_link_relocate): Likewise. * elf32-i860.c (i860_howto_pc26_reloc): Use multiplication instead of shifting to create a negative mask. * elf32-msp430.c (elf_backend_special_sections): Define. * elfxx-mips.c (got_ofst_reloc_p): Delete unused function. (got_hi16_reloc_p): Delete unused function. * ppcboot.c (ppcboot_bfd_print_private_bfd_data): Fix test of partition name. gas * config/tc-ppc.c (insn_validate): Cast PPC_OPSHIFT_INV to an int. opcode * ppc.h (PPC_OPSHIFT_INV): Use an unsigned constant when left shifting. ld * emultempl/elf32.em (ehdr_start_empty): New static variable. (before_allocation): Use it to initialise ehdr_start_save. * emultempl/pe.em (write_build_id): Remove useless double parenthesis. * emultempl/pep.em (write_build_id): Likewise. opcodes * bfin-dis.c (fmtconst): Remove unnecessary call to the abs function. * tic30-dis.c (print_branch): Likewise. * cgen-asm.c (cgen_parse_signed_integer): Cast integer to signed value before left shifting. * fr30-ibld.c (fr30_cgen_extract_operand): Likewise. * hppa-dis.c (print_insn_hppa): Likewise. * mips-dis.c (mips_cp0sel_names_mipsr5900): Delete unused static array. * msp430-dis.c (msp430_singleoperand): Likewise. (msp430_doubleoperand): Likewise. (print_insn_msp430): Likewise. * nds32-asm.c (parse_operand): Likewise. * sh-opc.h (MASK): Likewise. * v850-dis.c (get_operand_value): Likewise.
2015-08-12Remove trailing spaces in opcodesH.J. Lu1-3/+3
2015-01-02ChangeLog rotatation and copyright year updateAlan Modra1-1/+1
2014-10-31MIPS: Add Octeon 3 supportNaveen H.S1-0/+5
binutils: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * readelf.c (print_mips_isa_ext): Print the value of Octeon3. gas: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3. (mips_cpu_info_table): Octeon3 enables virt ase. * doc/c-mips.texi: Document octeon3 as an acceptable value for -march=. gas/testsuite: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * gas/mips/mips.exp: Add support for Octeon3 architecture. Also add in support for running Octeon3 tests. * gas/mips/octeon3.d: New test. * gas/mips/octeon3.s: New test source. opcodes: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * mips-dis.c (mips_arch_choices): Add octeon3. * mips-opc.c (IOCT): Include INSN_OCTEON3. (IOCT2): Likewise. (IOCT3): New define. (IVIRT): New define. (mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0, tlbinv, tlbinvf, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp, tlti IVIRT instructions. Extend mtm0, mtm1, mtm2, mtp0, mtp1, mtp2 instructions to take another operand for IOCT3. bfd: 2014-10-31 Andrew Pinski <apinski@cavium.com> Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com> * archures.c: Add octeon3 for mips target. * bfd-in2.h: Regenerate. * bfd/cpu-mips.c: Define I_mipsocteon3. nfo_struct): Add octeon3 support. * bfd/elfxx-mips.c: (_bfd_elf_mips_mach): Add support for octeon3. (mips_set_isa_flags): Add support for octeon3. (bfd_mips_isa_ext): Add bfd_mach_mips_octeon3. (mips_mach_extensions): Make bfd_mach_mips_octeon3 an extension of bfd_mach_mips_octeon2. (print_mips_isa_ext): Print the value of Octeon3.
2014-09-15Add support for MIPS R6.Andrew Bennett1-15/+201
bfd/ * aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6. * archures.c (bfd_architecture): Likewise. * bfd-in2.h (bfd_architecture): Likewise. (bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. * cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6. * elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2 R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. * elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. * elfn32-mips.c: Likewise. * elfxx-mips.c (MIPSR6_P): New define. (mipsr6_exec_plt_entry): New array. (hi16_reloc_p): Add support for R_MIPS_PCHI16. (lo16_reloc_p): Add support for R_MIPS_PCLO16. (aligned_pcrel_reloc_p): New function. (mips_elf_relocation_needs_la25_stub): Add support for relocs: R_MIPS_PC21_S2 and R_MIPS_PC26_S2. (mips_elf_calculate_relocation): Add support for relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6. (mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16. (_bfd_mips_elf_check_relocs): Add support for relocs: R_MIPS_PC21_S2 and R_MIPS_PC26_S2. (_bfd_mips_elf_relocate_section): Add a check for unaligned pc relative relocs. (_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6 plt entry. (mips_set_isa_flags): Add support for mips32r6 and mips64r6. (_bfd_mips_elf_print_private_bfd_data): Likewise. (mips_32bit_flags_p): Add support for mips32r6. * libbfd.h (bfd_reloc_code_real_names): Add entries for BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. * reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2. binutils/ * readelf.c (get_machine_flags): Add support for mips32r6 and mips64r6. elfcpp/ * mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants. gas/ * config/tc-mips.c (mips_nan2008): New static global. (mips_flag_nan2008): Removed. (LL_SC_FMT): New define. (COP12_FMT): Updated. (ISA_IS_R6): New define. (ISA_HAS_64BIT_REGS): Add mips64r6. (ISA_HAS_DROR): Likewise. (ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6. (ISA_HAS_ROR): Likewise. (ISA_HAS_ODD_SINGLE_FPR): Likewise. (ISA_HAS_MXHC1): Likewise. (hilo_interlocks): Likewise. (md_longopts): Likewise. (ISA_HAS_LEGACY_NAN): New define. (options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6. (mips_ase): Add field rem_rev. (mips_ases): Updated to add which ISA an ASE was removed in. (mips_isa_rev): Add support for mips32r6 and mips64r6. (mips_check_isa_supports_ase): Add support to check if an ASE has been removed in the specified MIPS ISA revision. (validate_mips_insn): Skip '-' character. (macro_build): Likewise. (mips_check_options): Prevent R6 working with fp32, mips16, micromips, or branch relaxation. (file_mips_check_options): Set R6 floating point registers to 64 bit. Also deal with the nan2008 option. (limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. (match_check_prev_operand): New static function. (match_same_rs_rt_operand): New static function. (match_non_zero_reg_operand): New static function. (match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. (insns_between): Added case to deal with forbidden slots. (append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2 and BFD_RELOC_MIPS_26_PCREL_S2. (match_insn): Add support for operands -A, -B, +' and +". Also skip '-' character. (mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo. (md_parse_option): Add support for mips32r6 and mips64r6. Also update the nan option handling. (md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2. (mips_force_relocation): Prevent forced relaxation for MIPS r6. (md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (s_mipsset): Add support for mips32r6 and mips64r6. (s_nan): Update to support the new nan2008 framework. (tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and BFD_RELOC_LO16_PCREL. (mips_elf_final_processing): Updated to use the mips_nan2008. (mips_cpu_info_table): Add entries for mips32r6 and mips64r6. (macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref macros for R6. (mips_fix_adjustable): Make PC relative R6 relocations relative to the symbol and not the section. * configure.ac: Add support for mips32r6 and mips64r6. * configure: Regenerate. * doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line options. * doc/as.texinfo: Likewise. gas/testsuite/ * gas/mips/24k-triple-stores-1.s: If testing for r6 prevent non-supported instructions from being tested. * gas/mips/24k-triple-stores-2.s: Likewise. * gas/mips/24k-triple-stores-3.s: Likewise. * gas/mips/24k-triple-stores-6.s: Likewise. * gas/mips/beq.s: Likewise. * gas/mips/eva.s: Likewise. * gas/mips/ld-zero-3.s: Likewise. * gas/mips/mips32-cp2.s: Likewise. * gas/mips/mips32.s: Likewise. * gas/mips/mips4.s: Likewise. * gas/mips/add.s: Don't test the add instructions if r6, and add padding. * gas/mips/add.d: Check for a triple dot not a nop at the end of the disassembly output. * gas/mips/micromips@add.d: Likewise. * gas/mips/mipsr6@24k-branch-delay-1.d: New file. * gas/mips/mipsr6@24k-triple-stores-1.d: New file. * gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file. * gas/mips/mipsr6@24k-triple-stores-2.d: New file. * gas/mips/mipsr6@24k-triple-stores-3.d: New file. * gas/mips/mipsr6@24k-triple-stores-6.d: New file. * gas/mips/mipsr6@add.d: New file. * gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file. * gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file. * gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file. * gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file. * gas/mips/mipsr6@beq.d: New file. * gas/mips/mipsr6@bge.d: New file. * gas/mips/mipsr6@bgeu.d: New file. * gas/mips/mipsr6@blt.d: New file. * gas/mips/mipsr6@bltu.d: New file. * gas/mips/mipsr6@branch-misc-1.d: New file. * gas/mips/mipsr6@branch-misc-2-64.d: New file. * gas/mips/mipsr6@branch-misc-2pic-64.d: New file. * gas/mips/mipsr6@branch-misc-4-64.d: New file. * gas/mips/mipsr6@cache.d: New file. * gas/mips/mipsr6@eva.d: New file. * gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file. * gas/mips/mipsr6@jal-svr4pic.d: New file. * gas/mips/mipsr6@ld-zero-2.d: New file. * gas/mips/mipsr6@ld-zero-3.d: New file. * gas/mips/mipsr6@loc-swap-dis.d: New file. * gas/mips/mipsr6@mips32-cp2.d: New file. * gas/mips/mipsr6@mips32-imm.d: New file. * gas/mips/mipsr6@mips32.d: New file. * gas/mips/mipsr6@mips32r2.d: New file. * gas/mips/mipsr6@mips4-fp.d: New file. * gas/mips/mipsr6@mips4-fp.l: New file. * gas/mips/mipsr6@mips4-fp.s: New file. * gas/mips/mipsr6@mips4.d: New file. * gas/mips/mipsr6@mips5-fp.d: New file. * gas/mips/mipsr6@mips5-fp.l: New file. * gas/mips/mipsr6@mips5-fp.s: New file. * gas/mips/mipsr6@mips64.d: New file. * gas/mips/mipsr6@msa-branch.d: New file. * gas/mips/mipsr6@msa.d: New file. * gas/mips/mipsr6@pref.d: New file. * gas/mips/mipsr6@relax-swap3.d: New file. * gas/mips/r6-64-n32.d: New file. * gas/mips/r6-64-n64.d: New file. * gas/mips/r6-64-removed.l: New file. * gas/mips/r6-64-removed.s: New file. * gas/mips/r6-64.s: New file. * gas/mips/r6-attr-none-double.d: New file. * gas/mips/r6-n32.d: New file. * gas/mips/r6-n64.d: New file. * gas/mips/r6-removed.l: New file. * gas/mips/r6-removed.s: New file. * gas/mips/r6.d: New file. * gas/mips/r6.s: New file. * gas/mips/mipsr6@mips32-dsp.d: New file. * gas/mips/mipsr6@mips32-dspr2.d: New file. * gas/mips/mipsr6@mips32r2-ill.l: New file. * gas/mips/mipsr6@mips32r2-ill.s: New file. * gas/mips/cache.s: Add r6 instruction varients. * gas/mips/mips.exp: Add support for the mips32r6 and mips64r6 architectures. Also prevent non r6 supported tests from running. Finally, add in support for running the new r6 tests. (run_dump_test_arch): Add support for mipsr6 tests. (run_list_test_arch): Add support for using files of the form arch@testname.l . include/elf/ * mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16. (E_MIPS_ARCH_32R6): New define. (E_MIPS_ARCH_64R6): New define. include/opcode/ * mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6 instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +; (mips_check_prev_operand): New struct. (INSN2_FORBIDDEN_SLOT): New define. (INSN_ISA32R6): New define. (INSN_ISA64R6): New define. (INSN_UPTO32R6): New define. (INSN_UPTO64R6): New define. (mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6. (ISA_MIPS32R6): New define. (ISA_MIPS64R6): New define. (CPU_MIPS32R6): New define. (CPU_MIPS64R6): New define. (cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6. ld/ * ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6. opcodes/ * mips-dis.c (mips_arch_choices): Add entries for mips32r6 and mips64r6. (parse_mips_dis_option): Allow MSA and virtualization support for mips64r6. (mips_print_arg_state): Add fields dest_regno and seen_dest. (mips_seen_register): New function. (print_insn_arg): Refactored code to use mips_seen_register function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out the register rather than aborting. (print_insn_args): Add length argument. Add code to correctly calculate the instruction address for pc relative instructions. (validate_insn_args): New static function. (print_insn_mips): Prevent jalx disassembling for r6. Use validate_insn_args. (print_insn_micromips): Use validate_insn_args. all the arguments are valid. * mips-formats.h (PREV_CHECK): New define. * mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +; (RD_pc): New define. (FS): New define. (I37): New define. (I69): New define. (mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded MIPS R6 instructions from MIPS R2 instructions.
2014-05-07Add MIPS r3 and r5 support.Andrew Bennett1-2/+38
This patch firstly adds support for mips32r3 mips32r5, mips64r3 and mips64r5. Secondly it adds support for the eretnc instruction. ChangeLog: bfd/ * aoutx.h (NAME (aout, machine_type)): Add mips32r3, mips64r3, mips32r5 and mips64r5. * archures.c (bfd_architecture): Likewise. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (arch_info_struct): Likewise. * elfxx-mips.c (mips_set_isa_flags): Likewise. gas/ * tc-mips.c (ISA_SUPPORTS_MIPS16E): Add mips32r3, mips32r5, mips64r3 and mips64r5. (ISA_HAS_64BIT_FPRS): Likewise. (ISA_HAS_ROR): Likewise. (ISA_HAS_ODD_SINGLE_FPR): Likewise. (ISA_HAS_MXHC1): Likewise. (hilo_interlocks): Likewise. (md_longopts): Likewise. (ISA_HAS_64BIT_REGS): Add mips64r3 and mips64r5. (ISA_HAS_DROR): Likewise. (options): Add OPTION_MIPS32R3, OPTION_MIPS32R5, OPTION_MIPS64R3, and OPTION_MIPS64R5. (mips_isa_rev): Add support for mips32r3, mips32r5, mips64r3 and mips64r5. (md_parse_option): Likewise. (s_mipsset): Likewise. (mips_cpu_info_table): Add entries for mips32r3, mips32r5, mips64r3 and mips64r5. Also change p5600 entry to be mips32r5. * configure.in: Add support for mips32r3, mips32r5, mips64r3 and mips64r5. * configure: Regenerate. * doc/c-mips.texi: Document the -mips32r3, -mips32r5, -mips64r3 and -mips64r5 command line options. * doc/as.texinfo: Likewise. gas/testsuite/ * gas/mips/mips.exp: Add MIPS32r5 tests. Also add the mips32r3, mips32r5, mips64r3 and mips64r5 isas to the testsuite. * gas/mips/r5.s: New test. * gas/mips/r5.d: Likewise. include/opcode/ * mips.h (INSN_ISA_MASK): Updated. (INSN_ISA32R3): New define. (INSN_ISA32R5): New define. (INSN_ISA64R3): New define. (INSN_ISA64R5): New define. (INSN_ISA64, INSN_ISA64R2, INSN_ISA3_32, INSN_ISA3_32R2, INSN_ISA4_32 INSN_ISA4_32R2, INSN_ISA5_32R2): Renumbered. (mips_isa_table): Add entries for mips32r3, mips32r5, mips64r3 and mips64r5. (INSN_UPTO32R3): New define. (INSN_UPTO32R5): New define. (INSN_UPTO64R3): New define. (INSN_UPTO64R5): New define. (ISA_MIPS32R3): New define. (ISA_MIPS32R5): New define. (ISA_MIPS64R3): New define. (ISA_MIPS64R5): New define. (CPU_MIPS32R3): New define. (CPU_MIPS32R5): New define. (CPU_MIPS64R3): New define. (CPU_MIPS64R5): New define. opcodes/ * mips-opc.c (mips_builtin_opcodes): Add MIPS32r5 eretnc instruction. (I34): New define. (I36): New define. (I66): New define. (I68): New define. * mips-dis.c (mips_arch_choices): Add mips32r3, mips32r5, mips64r3 and mips64r5. (parse_mips_dis_option): Update MSA and virtualization support to allow mips64r3 and mips64r5.
2014-04-23Add support for the MIPS eXtended Physical Address (XPA) ASE.Andrew Bennett1-2/+12
ChangeLog: binutils/ * doc/binutils.texi: Document the disassemble MIPS XPA instructions command line option. gas/ * config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA. (md_longopts): Add xpa and no-xpa command line options. (mips_ases): Add MIPS XPA ASE. (mips_cpu_info_table): Update p5600 entry to allow the XPA ASE. * doc/as.texinfo: Document the MIPS XPA command line options. * doc/c-mips.texi: Document the MIPS XPA command line options, and assembler directives. gas/testsuite/ * gas/mips/mips.exp: Add xpa tests. * gas/mips/xpa.s: New test. * gas/mips/xpa.d: Likewise. include/ * opcode/mips.h (ASE_XPA): New define. opcodes/ * mips-dis.c (mips_arch_choices): Update mips32r2 and mips64r2 to allow the MIPS XPA ASE. (parse_mips_dis_option): Process the -Mxpa option. * mips-opc.c (XPA): New define. (mips_builtin_opcodes): Add MIPS XPA instructions and move the locations of the ctc0 and cfc0 instructions.
2014-03-05Update copyright yearsAlan Modra1-3/+1
2014-03-04bfd/Richard Sandiford1-1/+1
2014-02-04 Heiher <r@hev.cc> * elfxx-mips.c (mips_set_isa_flags): Use E_MIPS_ARCH_64R2 for Loongson-3A. (mips_mach_extensions): Make bfd_mach_mips_loongson_3a an extension of bfd_mach_mipsisa64r2. opcodes/ 2014-02-04 Heiher <r@hev.cc> * mips-dis.c (mips_arch_choices): Usee ISA_MIPS64R2 for Loongson-3A. gas/ 2014-02-04 Heiher <r@hev.cc> * config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for Loongson-3A.
2013-12-16Add support to show the symbolic names of the MIPS CP1 registers.Andrew Bennett1-39/+101
2013-12-16 Andrew Bennett <andrew.bennett@imgtec.com> gas/testsuite/gas/mips/ * mips.exp: Add CP1 register name tests. * cp1-names-mips32.d: New test. * cp1-names-mips32r2.d: New test. * cp1-names-mips64.d: New test. * cp1-names-mips64r2.d: New test. * cp1-names-numeric.d: New test. * cp1-names-r3000.d: New test. * cp1-names-r4000.d: New test. * cp1-names-sb1.d: New test. * cp1-names.s: New test. * micromips-insn32.d: Add the correct symbolic names for the CP1 registers. * micromips-noinsn32.d: Likewise. * micromips-trap.d: Likewise. * micromips.d: Likewise. opcodes/ * mips-dis.c: Add mips_cp1_names pointer. (mips_cp1_names_numeric): New array. (mips_cp1_names_mips3264): New array. (mips_arch_choice): Add cp1_names. (mips_arch_choices): Add relevant cp1 register name array to each of the elements. (set_default_mips_dis_options): Add support for setting up the mips_cp1_names pointer. (parse_mips_dis_option): Add support for the cp1-names command line variable. Also setup the mips_cp1_names pointer. (print_reg): Print out name of the cp1 register.
2013-11-112013-11-11 Catherine Moore <clm@codesourcery.com>Catherine Moore1-2/+2
gas/ * config/mips/tc-mips.c (convert_reg_type): Use INSN_LOAD_MEMORY instead of INSN_LOAD_MEMORY_DELAY. (reg_needs_delay): Likewise. (insns_between): Likewise. include/ * opcode/mips.h (INSN_LOAD_MEMORY_DELAY): Rename to... (INSN_LOAD_MEMORY): ...this. opcodes/ * mips-dis.c (print_insn_mips): Use INSN_LOAD_MEMORY instead of INSN_LOAD_MEMORY_DELAY. (print_insn_micromips): Likewise. * mips-opc.c (LDD): Remove. (CLD): Include INSN_LOAD_MEMORY. (LM): New. (mips_builtin_opcodes): Use LM instead of LDD. Add LM to load instructions.
2013-10-142013-10-14 Chao-ying Fu <Chao-ying.Fu@imgtec.com>Chao-ying Fu1-2/+41
* micromips-opc.c (decode_micromips_operand): Add +T, +U, +V, +W, +d, +e, +h, +k, +l, +n, +o, +u, +v, +w, +x, +~, +!, +@, +#, +$, +%, +^, +&, +*, +|. (MSA): New define. (MSA64): New define. (micromips_opcodes): Add MSA instructions. * mips-dis.c (msa_control_names): New array. (mips_abi_choice): Add ASE_MSA to mips32r2. Remove ASE_MDMX from mips64r2. Add ASE_MSA and ASE_MSA64 to mips64r2. (parse_mips_dis_option): Handle -Mmsa. (print_reg): Handle cases for OP_REG_MSA and OP_REG_MSA_CTRL. (print_insn_arg): Handle cases for OP_IMM_INDEX and OP_REG_INDEX. (print_mips_disassembler_options): Print -Mmsa. * mips-opc.c (decode_mips_operand): Add +T, +U, +V, +W, +d, +e, +h, +k, +l, +n, +o, +u, +v, +w, +~, +!, +@, +#, +$, +%, +^, +&, +*, +|. (MSA): New define. (MSA64): New define. (mips_builtin_op): Add MSA instructions.
2013-08-19include/opcode/Richard Sandiford1-0/+1
* mips.h (OP_OPTIONAL_REG): New mips_operand_type. (mips_optional_operand_p): New function. opcodes/ * mips-formats.h (OPTIONAL_REG, OPTIONAL_MAPPED_REG): New macros. * micromips-opc.c (decode_micromips_operand): Use OPTIONAL_REG and OPTIONAL_MAPPED_REG. * mips-opc.c (decode_mips_operand): Likewise. * mips16-opc.c (decode_mips16_operand): Likewise. * mips-dis.c (print_insn_arg): Handle OP_OPTIONAL_REG. gas/ * config/tc-mips.c (operand_reg_mask, match_operand): Handle OP_OPTIONAL_REG. (mips_ip, mips16_ip): Use mips_optional_operand_p to check for optional operands.
2013-08-04include/opcode/Richard Sandiford1-0/+61
2013-08-04 Jürgen Urban <JuergenUrban@gmx.de> Richard Sandiford <rdsandiford@googlemail.com> * mips.h: Document new VU0 operand characters. (OP_VU0_SUFFIX, OP_VU0_MATCH_SUFFIX): New mips_operand_types. (OP_REG_VF, OP_REG_VI, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R) (OP_REG_R5900_ACC): New mips_reg_operand_types. (INSN2_VU0_CHANNEL_SUFFIX): New macro. (mips_vu0_channel_mask): Declare. opcodes/ 2013-08-04 Jürgen Urban <JuergenUrban@gmx.de> Richard Sandiford <rdsandiford@googlemail.com> * mips-dis.c (print_reg): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC. (print_vu0_channel): New function. (print_insn_arg): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX. (print_insn_args): Handle '#'. (print_insn_mips): Handle INSN2_VU0_CHANNEL_SUFFIX. * mips-opc.c (mips_vu0_channel_mask): New constant. (decode_mips_operand): Handle new VU0 operand types. (VU0, VU0CH): New macros. (mips_builtin_opcodes): Add VU0 opcodes. Use "+7" rather than "E" for LQC2 and SQC2. Use "+9" rather than "G" for EE CFC2 and CTC2. Use "+6" rather than "G" for QMFC2 and QMTC2. gas/ 2013-08-04 Jürgen Urban <JuergenUrban@gmx.de> Richard Sandiford <rdsandiford@googlemail.com> * config/tc-mips.c (MAX_OPERANDS): Bump to 6. (RWARN): Bump to 0x8000000. (RTYPE_VI, RTYPE_VF, RTYPE_R5900_I, RTYPE_R5900_Q, RTYPE_R5900_R) (RTYPE_R5900_ACC): New register types. (RTYPE_MASK): Include them. (R5900_I_NAMES, R5900_Q_NAMES, R5900_R_NAMES, R5900_ACC_NAMES): New macros. (reg_names): Include them. (mips_parse_register_1): New function, split out from... (mips_parse_register): ...here. Add a channels_ptr parameter. Look for VU0 channel suffixes when nonnull. (reg_lookup): Update the call to mips_parse_register. (mips_parse_vu0_channels): New function. (OT_CHANNELS, OT_DOUBLE_CHAR): New mips_operand_token_types. (mips_operand_token): Add a "channels" field to the union. Extend the comment above "ch" to OT_DOUBLE_CHAR. (mips_parse_base_start): Match -- and ++. Handle channel suffixes. (mips_parse_argument_token): Handle channel suffixes here too. (validate_mips_insn): Handle INSN2_VU0_CHANNEL_SUFFIX. Ignore OP_VU0_MATCH_SUFFIX when calculating the used bits. Handle '#' formats. (md_begin): Register $vfN and $vfI registers. (operand_reg_mask): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX. (convert_reg_type): Handle OP_REG_VI, OP_REG_VF, OP_REG_R5900_I, OP_REG_R5900_Q, OP_REG_R5900_R and OP_REG_R5900_ACC. (match_vu0_suffix_operand): New function. (match_operand): Handle OP_VU0_SUFFIX and OP_VU0_MATCH_SUFFIX. (macro): Use "+7" rather than "E" for LDQ2 and STQ2. (mips_lookup_insn): New function. (mips_ip): Use it. Allow "+K" operands to be elided at the end of an instruction. Handle '#' sequences. gas/testsuite/ 2013-08-04 Jürgen Urban <JuergenUrban@gmx.de> * gas/mips/r5900-vu0.d: Expect $vfN and $viN instead of numeric coprocessor registers. * gas/mips/r5900-all-vu0.s, gas/mips/r5900-all-vu0.d, gas/mips/r5900-full-vu0.s, gas/mips/r5900-full-vu0.d, gas/mips/r5900-error-vu0.s, gas/mips/r5900-error-vu0.l: New tests. * gas/mips/mips.exp: Run them.
2013-08-01include/opcode/Richard Sandiford1-5/+3
* mips.h (mips_decode_reg_operand): New function. (INSN_WRITE_SHIFT, INSN_WRITE_1, INSN_WRITE_2, INSN_WRITE_ALL) (INSN_READ_SHIFT, INSN_READ_1, INSN_READ_2, INSN_READ_3, INSN_READ_4) (INSN_READ_ALL, INSN_READ_GPR_24, INSN_WRITE_GPR_24, INSN_UDI): New macros. (INSN_WRITE_GPR_D, INSN_WRITE_GPR_T, INSN_WRITE_FPR_D) (INSN_WRITE_FPR_S, INSN_WRITE_FPR_T, INSN_READ_GPR_S, INSN_READ_GPR_T) (INSN_READ_FPR_S, INSN_READ_FPR_T, INSN_READ_FPR_R, INSN_WRITE_GPR_S) (INSN2_WRITE_GPR_Z, INSN2_WRITE_FPR_Z, INSN2_READ_GPR_Z) (INSN2_READ_FPR_Z, INSN2_READ_GPR_D, INSN2_READ_FPR_D) (INSN2_WRITE_GPR_MB, INSN2_READ_GPR_MC, INSN2_MOD_GPR_MD) (INSN2_READ_GPR_ME, INSN2_MOD_GPR_MF, INSN2_READ_GPR_MG) (INSN2_READ_GPR_MJ, INSN2_WRITE_GPR_MJ, INSN2_READ_GPR_MP) (INSN2_WRITE_GPR_MP, INSN2_READ_GPR_MQ, INSN2_READ_GP) (INSN2_WRITE_GPR_MH, INSN2_READ_GPR_MMN): Delete. Renumber other macros to cover the gaps. (INSN2_MOD_SP): Replace with... (INSN2_WRITE_SP, INSN2_READ_SP): ...these new macros. (MIPS16_INSN_WRITE_X, MIPS16_INSN_WRITE_Y, MIPS16_INSN_WRITE_Z) (MIPS16_INSN_WRITE_T, MIPS16_INSN_WRITE_31, MIPS16_INSN_WRITE_GPR_Y) (MIPS16_INSN_READ_X, MIPS16_INSN_READ_Y, MIPS16_INSN_READ_Z) (MIPS16_INSN_READ_T, MIPS16_INSN_READ_SP, MIPS16_INSN_READ_GPR_X): Delete. opcodes/ * mips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2, UDI): New macros. (WR_d, WR_t, WR_D, WR_T, WR_S, RD_s, RD_b, RD_t, RD_S, RD_T, RD_R) (WR_z, WR_Z, RD_z, RD_Z, RD_d): Delete. (mips_builtin_opcodes): Use the new position-based read-write flags instead of field-based ones. Use UDI for "udi..." instructions. * mips16-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_x, WR_y, WR_z, WR_Y, RD_x, RD_y, RD_Z, RD_X): Delete. (RD_T, WR_T, WR_31): Redefine using generic INSN_* flags. (WR_SP, RD_16): New macros. (RD_SP): Redefine as an INSN2_* flag. (MOD_SP): Redefine in terms of RD_SP and WR_SP. (mips16_opcodes): Use the new position-based read-write flags instead of field-based ones. Use RD_16 for "nop". Move RD_SP to pinfo2 field. * micromips-opc.c (WR_1, WR_2, RD_1, RD_2, RD_3, RD_4, MOD_1, MOD_2): New macros. (WR_mb, RD_mc, RD_md, WR_md, RD_me, RD_mf, WR_mf, RD_mg, WR_mh, RD_mj) (WR_mj, RD_ml, RD_mmn, RD_mp, WR_mp, RD_mq, RD_gp, WR_d, WR_t, WR_D) (WR_T, WR_S, RD_s, RD_b, RD_t, RD_T, RD_S, RD_R, RD_D): Delete. (RD_sp, WR_sp): Redefine to INSN2_READ_SP and INSN2_WRITE_SP. (micromips_opcodes): Use the new position-based read-write flags instead of field-based ones. * mips-dis.c (print_insn_arg): Use mips_decode_reg_operand. (print_insn_mips, print_insn_micromips): Use INSN_WRITE_1 instead of field-based flags. gas/ * config/tc-mips.c (MAX_OPERANDS): New macro. (mips_operand_array): New structure. (mips_operands, mips16_operands, micromips_operands): New arrays. (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_e_map, micromips_to_32_reg_f_map) (micromips_to_32_reg_g_map, micromips_to_32_reg_l_map) (micromips_to_32_reg_q_map): Delete. (insn_operands, insn_opno, insn_extract_operand): New functions. (validate_mips_insn): Take a mips_operand_array as argument and use it to build up a list of operands. Extend to handle INSN_MACRO and MIPS16. (validate_mips16_insn): New function. (validate_micromips_insn): Take a mips_operand_array as argument. Handle INSN_MACRO. (md_begin): Initialize mips_operands, mips16_operands and micromips_operands. Call validate_mips_insn and validate_micromips_insn for macro instructions too. Call validate_mips16_insn for MIPS16 instructions. (insn_read_mask, insn_write_mask, operand_reg_mask, insn_reg_mask): New functions. (gpr_read_mask, gpr_write_mask, fpr_read_mask, fpr_write_mask): Use them. Handle INSN_UDI. (get_append_method): Use gpr_read_mask.
2013-08-01include/opcode/Richard Sandiford1-3/+3
* mips.h (MIPS16_INSN_WRITE_SP, MIPS16_INSN_READ_31) (MIPS16_INSN_READ_PC, MIPS16_INSN_UNCOND_BRANCH) (MIPS16_INSN_COND_BRANCH): Delete. opcodes/ * mips16-opc.c (UBR, CBR, RD_31, RD_PC): Redefine as INSN2_* flags. (WR_SP): Replace with... (MOD_SP): ...this. (mips16_opcodes): Update accordingly. * mips-dis.c (print_insn_mips16): Likewise. gas/ * config/tc-mips.c (compact_branch_p, uncond_branch_p): Use the same flags for MIPS16 and non-MIPS16 instructions. (gpr_mod_mask): Move the INSN2_MOD_SP case outside the micromips block. (gpr_read_mask): Use INSN2_READ_GPR_31 for MIPS16 instructions too. (gpr_write_mask): Remove MIPS16_INSN_WRITE_SP handling. (can_swap_branch_p, get_append_method): Use the same flags for MIPS16 and non-MIPS16 instructions. Fix formatting.
2013-08-01opcodes/Richard Sandiford1-1/+1
* mips-dis.c (print_mips16_insn_arg): Include ISA bit in base address.
2013-07-14include/opcode/Richard Sandiford1-460/+204
* mips.h (mips_operand_type): Add OP_ENTRY_EXIT_LIST and OP_SAVE_RESTORE_LIST. (decode_mips16_operand): Declare. opcodes/ * mips16-opc.c: Include mips-formats.h. (reg_0_map, reg_29_map, reg_31_map, reg_m16_map, reg32r_map): New static arrays. (decode_mips16_operand): New function. * mips-dis.c (mips16_to_32_reg_map, mips16_reg_names): Delete. (print_insn_arg): Handle OP_ENTRY_EXIT list. Abort for OP_SAVE_RESTORE_LIST. (print_mips16_insn_arg): Change interface. Use mips_operand structures. Delete GET_OP_S. Move GET_OP definition to... (print_insn_mips16): ...here. Call init_print_arg_state. Update the call to print_mips16_insn_arg.
2013-07-14include/opcode/Richard Sandiford1-1085/+316
* mips.h (mips_operand_type, mips_reg_operand_type): New enums. (mips_operand, mips_int_operand, mips_mapped_int_operand) (mips_msb_operand, mips_reg_operand, mips_reg_pair_operand) (mips_pcrel_operand): New structures. (mips_insert_operand, mips_extract_operand, mips_signed_operand) (mips_decode_int_operand, mips_decode_pcrel_operand): New functions. (decode_mips_operand, decode_micromips_operand): Declare. opcodes/ * mips-formats.h: New file. * mips-opc.c: Include mips-formats.h. (reg_0_map): New static array. (decode_mips_operand): New function. * micromips-opc.c: Remove <stdio.h> include. Include mips-formats.h. (reg_0_map, reg_28_map, reg_29_map, reg_31_map, reg_m16_map) (reg_mn_map, reg_q_map, reg_h_map1, reg_h_map2, int_b_map) (int_c_map): New static arrays. (decode_micromips_operand): New function. * mips-dis.c (micromips_to_32_reg_b_map, micromips_to_32_reg_c_map) (micromips_to_32_reg_d_map, micromips_to_32_reg_e_map) (micromips_to_32_reg_f_map, micromips_to_32_reg_g_map) (micromips_to_32_reg_h_map1, micromips_to_32_reg_h_map2) (micromips_to_32_reg_l_map, micromips_to_32_reg_m_map) (micromips_to_32_reg_n_map, micromips_to_32_reg_q_map) (micromips_imm_b_map, micromips_imm_c_map): Delete. (print_reg): New function. (mips_print_arg_state): New structure. (init_print_arg_state, print_insn_arg): New functions. (print_insn_args): Change interface and use mips_operand structures. Delete GET_OP_S. Move GET_OP definition to... (print_insn_mips): ...here. Update the call to print_insn_args. (print_insn_micromips): Use print_insn_args. gas/ * config/tc-mips.c (validate_mips_insn): Move further up file. Add insn_bits and decode_operand arguments. Use the mips_operand fields to work out which bits an operand occupies. Detect double definitions. (validate_micromips_insn): Move further up file. Call into validate_mips_insn.
2013-07-07include/opcode/Richard Sandiford1-4/+4
* mips.h: Remove documentation of "[" and "]". Update documentation of "k" and the MDMX formats. opcodes/ * mips-opc.c (mips_builtin_opcodes): Use "Q" for the INSN_5400 MDMX-like instructions. * mips-dis.c (print_insn_arg): Use "$f" rather than "$v" when printing "Q" operands for INSN_5400 instructions. gas/ * config/tc-mips.c (validate_mips_insn): Remove "[" and "]" handling. (mips_ip): Likewise. Do not set is_mdmx for INSN_5400 instructions. Check constraints on the VR5400 RZU.OB, SLL.OB and SRL.OB instructions. gas/testsuite/ * gas/mips/vr5400-ill.s, gas/mips/vr5400-ill.l: New test. * gas/mips/mips.exp: Run it.
2013-07-07include/opcode/Richard Sandiford1-5/+2
* mips.h: Update documentation of "+s" and "+S". opcodes/ * mips-opc.c (mips_builtin_opcodes): Use "+s" for "cins32" and "+S" for "cins". * mips-dis.c (print_mips_arg): Update "+s" and "+S" comments. Combine cases. gas/ * config/tc-mips.c (mips_ip): Preserve the real bit number for "+p". Require the msb to be <= 31 for "+s". Check that the size is <= 31 for both "+s" and "+S".
2013-07-07include/opcode/Richard Sandiford1-17/+22
* mips.h: Document "+i". opcodes/ * mips-opc.c (mips_builtin_opcodes): Use "+i" rather than "a" for "jalx". * mips16-opc.c (mips16_opcodes): Likewise. * micromips-opc.c (micromips_opcodes): Likewise. * mips-dis.c (print_insn_args, print_mips16_insn_arg) (print_insn_mips16): Handle "+i". (print_insn_micromips): Likewise. Conditionally preserve the ISA bit for "a" but not for "+i". gas/ * config/tc-mips.c (validate_mips_insn, validate_micromips_insn): (mips_ip, mips16_ip): Handle "+i".
2013-07-07include/opcode/Richard Sandiford1-10/+5
* mips.h: Remove "mi" documentation. Update "mh" documentation. (OP_MASK_MI, OP_SH_MI, MICROMIPSOP_MASK_MI, MICROMIPSOP_MASK_MI): Delete. (INSN2_WRITE_GPR_MHI): Rename to... (INSN2_WRITE_GPR_MH): ...this. opcodes/ * micromips-opc.c (WR_mhi): Rename to.. (WR_mh): ...this. (micromips_opcodes): Update "movep" entry accordingly. Replace "mh,mi" with "mh". * mips-dis.c (micromips_to_32_reg_h_map): Rename to... (micromips_to_32_reg_h_map1): ...this. (micromips_to_32_reg_i_map): Rename to... (micromips_to_32_reg_h_map2): ...this. (print_micromips_insn): Remove "mi" case. Print both registers in the pair for "mh". gas/ * config/tc-mips.c (mips32_to_micromips_reg_h_map): Delete. (micromips_to_32_reg_h_map): Rename to... (micromips_to_32_reg_h_map1): ...this. (micromips_to_32_reg_i_map): Rename to... (micromips_to_32_reg_h_map2): ...this. (mips_lookup_reg_pair): New function. (gpr_write_mask, macro): Adjust after above renaming. (validate_micromips_insn): Remove "mi" handling. (mips_ip): Likewise. Parse both registers in a pair for "mh".
2013-07-07include/opcode/Richard Sandiford1-102/+61
* mips.h: Remove documentation of "+D" and "+T". opcodes/ * mips-opc.c (mips_builtin_opcodes): Remove "+D" and "+T" entries. * micromips-opc.c (micromips_opcodes): Likewise. * mips-dis.c (print_insn_args, print_insn_micromips): Remove "+D" and "+T" handling. Check for a "0" suffix when deciding whether to use coprocessor 0 names. In that case, also check for ",H" selectors. gas/ * config/tc-mips.c (validate_mips_insn, validate_micromips_insn) (mips_ip): Remove "+D" and "+T" handling. gas/testsuite/ * gas/mips/lb.d, gas/mips/sb.d: Use coprocessor register names for LWC0 and SWC0.
2013-06-24 bfd/Maciej W. Rozycki1-23/+60
* elfxx-mips.h (_bfd_mips_elf_get_synthetic_symtab): New prototype. * elf32-mips.c (elf_backend_plt_sym_val): Remove macro. (bfd_elf32_get_synthetic_symtab): New macro. * elfxx-mips.c (plt_entry): New structure. (mips_elf_link_hash_entry): Add use_plt_entry member. (mips_elf_link_hash_table): Rename plt_entry_size member to plt_mips_entry_size. Add plt_comp_entry_size, plt_mips_offset, plt_comp_offset, plt_got_index entries and plt_header_is_comp members. (STUB_LW_MICROMIPS, STUB_MOVE_MICROMIPS): New macros. (STUB_LUI_MICROMIPS, STUB_JALR_MICROMIPS): Likewise. (STUB_ORI_MICROMIPS, STUB_LI16U_MICROMIPS): Likewise. (STUB_LI16S_MICROMIPS): Likewise. (MICROMIPS_FUNCTION_STUB_NORMAL_SIZE): Likewise. (MICROMIPS_FUNCTION_STUB_BIG_SIZE): Likewise. (micromips_o32_exec_plt0_entry): New variable. (mips16_o32_exec_plt_entry): Likewise. (micromips_o32_exec_plt_entry): Likewise. (mips_elf_link_hash_newfunc): Initialize use_plt_entry. (mips_elf_output_extsym): Update to use gotplt_union's plist member rather than offset. (mips_elf_gotplt_index): Likewise. Remove the VxWorks restriction. Use MIPS_ELF_GOT_SIZE to calculate GOT address. (mips_elf_count_got_symbols): Update to use gotplt_union's plist member rather than offset. (mips_elf_calculate_relocation): Handle MIPS16/microMIPS PLT entries. (_bfd_mips_elf_create_dynamic_sections): Don't set PLT sizes here. (mips_elf_make_plt_record): New function. (_bfd_mips_elf_check_relocs): Update comment. Record occurences of JAL relocations that might need a PLT entry. (_bfd_mips_elf_adjust_dynamic_symbol): Update to use gotplt_union's plist member rather than offset. Set individual PLT entry sizes here. Handle MIPS16/microMIPS PLT entries. Don't set the symbol's value in the symbol table for PLT references here. Don't set the PLT or PLT GOT section sizes here. (mips_elf_estimate_stub_size): Handle microMIPS stubs. (mips_elf_allocate_lazy_stub): Likewise. (mips_elf_lay_out_lazy_stubs): Likewise. Define a _MIPS_STUBS_ magic symbol. (mips_elf_set_plt_sym_value): New function. (_bfd_mips_elf_size_dynamic_sections): Set PLT header size and PLT and PLT GOT section sizes here. Set the symbol values in the symbol table for PLT references here. Handle microMIPS annotation of the _PROCEDURE_LINKAGE_TABLE_ magic symbol. (_bfd_mips_elf_finish_dynamic_symbol): Update to use gotplt_union's plist member rather than offset. Handle MIPS16/microMIPS PLT entries. Handle microMIPS stubs. (_bfd_mips_vxworks_finish_dynamic_symbol): Update to use gotplt_union's plist member rather than offset. Use MIPS_ELF_GOT_SIZE to calculate GOT address. (mips_finish_exec_plt): Handle microMIPS PLT. Return status. (_bfd_mips_elf_finish_dynamic_sections): Handle result from mips_finish_exec_plt. (_bfd_mips_elf_link_hash_table_create): Update to use gotplt_union's plist member rather than offset. (_bfd_mips_elf_get_synthetic_symtab): New function. include/elf/ * mips.h (ELF_ST_IS_MIPS_PLT): Respect STO_MIPS16 setting. (ELF_ST_SET_MIPS_PLT): Likewise. gdb/ * mips-tdep.c (mips_elf_make_msymbol_special): Handle MIPS16 and microMIPS synthetic symbols. ld/ * emulparams/elf32btsmip.sh: Arrange for .got.plt to be placed as close to .plt as possible. * scripttempl/elf.sc: Handle $INITIAL_READWRITE_SECTIONS and $PLT_NEXT_DATA variables. ld/testsuite/ * ld-mips-elf/jalx-2.dd: Update for microMIPS PLT support. * ld-mips-elf/pic-and-nonpic-3a.dd: Update for the _MIPS_STUBS_ magic symbol. * ld-mips-elf/pic-and-nonpic-3b.dd: Likewise. * ld-mips-elf/pic-and-nonpic-6-n32.dd: Likewise. * ld-mips-elf/pic-and-nonpic-6-n64.dd: Likewise. * ld-mips-elf/pic-and-nonpic-6-o32.dd: Likewise. * ld-mips-elf/stub-dynsym-1-10000.d: Likewise. * ld-mips-elf/stub-dynsym-1-2fe80.d: Likewise. * ld-mips-elf/stub-dynsym-1-7fff.d: Likewise. * ld-mips-elf/stub-dynsym-1-8000.d: Likewise. * ld-mips-elf/stub-dynsym-1-fff0.d: Likewise. * ld-mips-elf/tlslib-o32.d: Likewise. opcodes/ * mips-dis.c (is_mips16_plt_tail): New function. (print_insn_mips16): Handle MIPS16 PLT entry's GOT slot address word. (is_compressed_mode_p): Handle MIPS16/microMIPS PLT entries.
2013-06-172013-06-17 Catherine Moore <clm@codesourcery.com>Catherine Moore1-4/+13
Maciej W. Rozycki <macro@codesourcery.com> Chao-Ying Fu <fu@mips.com> gas/testsuite/ * gas/mips/mips.exp: Run new tests. * gas/mips/eva.d: New. * gas/mips/eva.s: New. * gas/mips/micromips@eva.d: New. gas/ * config/tc-mips.c (mips_set_options): Add ase_eva. (mips_set_options mips_opts): Add ase_eva. (file_ase_eva): Declare. (ISA_SUPPORTS_EVA_ASE): Define. (IS_SEXT_9BIT_NUM): Define. (MIPS_CPU_ASE_EVA): Define. (is_opcode_valid): Add support for ase_eva. (macro_build): Likewise. (macro): Likewise. (validate_mips_insn): Likewise. (validate_micromips_insn): Likewise. (mips_ip): Likewise. (options): Add OPTION_EVA and OPTION_NO_EVA. (md_longopts): Add -meva and -mno-eva. (md_parse_option): Process new options. (mips_after_parse_args): Check for valid EVA combinations. (s_mipsset): Likewise. include/ * opcode/mips.h (OP_SH_EVAOFFSET): Define. (OP_MASK_EVAOFFSET): Define. (INSN_ASE_MASK): Delete. (ASE_EVA): Define. (M_CACHEE_AB, M_CACHEE_OB): New. (M_LBE_OB, M_LBE_AB): New. (M_LBUE_OB, M_LBUE_AB): New. (M_LHE_OB, M_LHE_AB): New. (M_LHUE_OB, M_LHUE_AB): New. (M_LLE_AB, M_LLE_OB): New. (M_LWE_OB, M_LWE_AB): New. (M_LWLE_AB, M_LWLE_OB): New. (M_LWRE_AB, M_LWRE_OB): New. (M_PREFE_AB, M_PREFE_OB): New. (M_SCE_AB, M_SCE_OB): New. (M_SBE_OB, M_SBE_AB): New. (M_SHE_OB, M_SHE_AB): New. (M_SWE_OB, M_SWE_AB): New. (M_SWLE_AB, M_SWLE_OB): New. (M_SWRE_AB, M_SWRE_OB): New. (MICROMIPSOP_SH_EVAOFFSET): Define. (MICROMIPSOP_MASK_EVAOFFSET): Define. opcodes/ * micromips-opc.c (EVA): Define. (TLBINV): Define. (micromips_opcodes): Add EVA opcodes. * mips-dis.c (mips_arch_choices): Update for ASE_EVA. (print_insn_args): Handle EVA offsets. (print_insn_micromips): Likewise. * mips-opc.c (EVA): Define. (TLBINV): Define. (mips_builtin_opcodes): Add EVA opcodes.
2013-06-132013-06-13 Chao-ying Fu <Chao-ying.Fu@imgtec.com>Chao-ying Fu1-0/+4
* micromips-opc.c (IVIRT): New define. (IVIRT64): New define. (micromips_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0, tlbginv, tlbginvf, tlbgp, tlbgr, tlbgwi, tlbgwr VIRT instructions. * mips-dis.c (print_insn_micromips): Handle mfgc0, mtgc0, dmfgc0, dmtgc0 to print cp0 names.
2013-06-08gas/Richard Sandiford1-44/+51
2013-06-08 Catherine Moore <clm@codesourcery.com> * config/tc-mips.c (is_opcode_valid): Build ASE mask. (is_opcode_valid_16): Pass ase value to opcode_is_member. (append_insn): Change INSN_xxxx to ASE_xxxx. include/ 2013-06-08 Catherine Moore <clm@codesourcery.com> * opcode/mips.h (mips_opcode): Add ase field. (INSN_ASE_MASK): Delete. (INSN_DSP): Rename to ASE_DSP. Provide new value. (INSN_DSPR2): Rename to ASE_DSPR2. Provide new value. (INSN_MCU): Rename to ASE_MCU. Provide new value. (INSN_MDMX): Rename to ASE_MDMX. Provide new value. (INSN_MIPS3d): Rename to ASE_MIPS3D. Provide new value. (INSN_MT): Rename to ASE_MT. Provide new value. (INSN_SMARTMIPS): Rename to ASE_SMARTMIPS. Provide new value. (INSN_VIRT): Rename to ASE_VIRT. Provide new value. (INSN_VIRT64): Rename to ASE_VIRT64. Provide new value. (opcode_is_member): Add ase argument. Check ase. opcodes/ 2013-06-08 Catherine Moore <clm@codesourcery.com> Richard Sandiford <rdsandiford@googlemail.com> * micromips-opc.c (D32, D33, MC): Update definitions. (micromips_opcodes): Initialize ase field. * mips-dis.c (mips_arch_choice): Add ase field. (mips_arch_choices): Initialize ase field. (set_default_mips_dis_options): Declare and setup mips_ase. * mips-opc.c (M3D, SMT, MX, IVIRT, IVIRT64, D32, D33, D64, MT32, MC): Update definitions. (mips_builtin_opcodes): Initialize ase field.
2013-05-10binutils/ChangeLog:Andrew Pinski1-2/+17
* doc/binutils.texi: Document -Mvirt disassembler option. gas/ChangeLog: * config/tc-mips.c (struct mips_set_options): New ase_virt field. (mips_opts): Update for the new field. (file_ase_virt): New variable. (ISA_SUPPORTS_VIRT_ASE): New macro. (ISA_SUPPORTS_VIRT64_ASE): New macro. (MIPS_CPU_ASE_VIRT): New define. (is_opcode_valid): Handle ase_virt. (macro_build): Handle "+J". (validate_mips_insn): Likewise. (mips_ip): Likewise. (enum options): Add OPTION_VIRT and OPTION_NO_VIRT. (md_longopts): Add mvirt and mnovirt (md_parse_option): Handle OPTION_VIRT and OPTION_NO_VIRT. (mips_after_parse_args): Handle ase_virt field. (s_mipsset): Handle "virt" and "novirt". (mips_elf_final_processing): Add a comment about virt ASE might need a new flag. (md_show_usage): Print out the usage of -mvirt and mno-virt options. * doc/c-mips.texi: Document -mvirt and -mno-virt. Document ".set virt" and ".set novirt". gas/testsuite/ChangeLog: * gas/mips/mips.exp: Run virt and virt64 testcases. * gas/mips/virt.d: New file. * gas/mips/virt.s: New file. * gas/mips/virt64.d: New file. * gas/mips/virt64.s: New file. include/opcode/ChangeLog: * mips.h (OP_MASK_CODE10): Correct definition. (OP_SH_CODE10): Likewise. Add a comment that "+J" is used now for OP_*CODE10. (INSN_ASE_MASK): Update. (INSN_VIRT): New macro. (INSN_VIRT64): New macro opcodes/ChangeLog: * mips-dis.c (mips_arch_choices): Add INSN_VIRT to mips32r2 . Add INSN_VIRT and INSN_VIRT64 to mips64r2. (parse_mips_dis_option): Handle the virt option. (print_insn_args): Handle "+J". (print_mips_disassembler_options): Print out message about virt64. * mips-opc.c (IVIRT): New define. (IVIRT64): New define. (mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp VIRT instructions. Move rfe to the bottom as it conflicts with tlbgp.
2013-03-12Eliminate warning message.Michael Eager1-1/+3
* opcodes/mips-dis.c (print_insn_args): Modify def of reg.
generated by cgit v1.1 at 2025-09-27 16:09:11 +0000