| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
fbsd-nat includes various helper routines for fetching and storing
register sets via ptrace where the register set is described by a
regset. These helper routines directly invoke the
supply/collect_regset regcache methods which doesn't permit a regset
to provide custom logic when fetching or storing a register set.
Instead, just use the function pointers from the struct regset
directly.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
|
|
Some register sets described by an array of regcache_map_entry
structures do not have fixed register numbers in their associated
architecture but do describe a block of registers whose numbers are at
fixed offsets relative to some base register value. An example of
this are the TLS register sets for the ARM and AArch64 architectures.
Currently OS-specific architectures create register maps and register
sets dynamically using the register base number. However, this
requires duplicating the code to create the register map and register
set. To reduce duplication, add variants of the collect_regset and
supply_regset regcache methods which accept a base register number.
For valid register map entries (i.e. not REGCACHE_MAP_SKIP), add this
base register number to the value from the map entry to determine the
final register number.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
|
|
As part of the rebase of the patch, I managed to loose the local
changes I had for the comments from Tomas in
https://sourceware.org/pipermail/gdb-patches/2022-November/193413.html
This patch corrects the obvious two typos.
Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
|
|
With the recent changes to the dwarf assembler, there is no longer a
need to test for gcc in gdb.dwarf2/clang-cli-macro.exp and mark it as
untested. This commit removes that logic.
|
|
The test py-objfile.exp unloads the current file while debugging the process.
This results in bpstat bs->b->loc to become nullptr.
Handle this case in breakpoint.c:bpstat_locno.
Note: GDB crashes on this problem with an internal error,
but the end of gdb summary shows:
...
=== gdb Summary ===
# of expected passes 36
The output also does not contain a 'FAIL:'.
After the fix, the nr of expected passes increased.
In the gdb.log output, one can see:
...
Fatal signal: Segmentation fault
----- Backtrace -----
0x55698905c5b9 gdb_internal_backtrace_1
../../binutils-gdb/gdb/bt-utils.c:122
0x55698905c5b9 _Z22gdb_internal_backtracev
...
ERROR: Couldn't send python print(objfile.filename) to GDB.
ERROR: : spawn id exp9 not open
while executing
"expect {
-i exp9 -timeout 10
-re ".*A problem internal to GDB has been detected" {
fail "$message (GDB internal error)"
gdb_internal_error..."
("uplevel" body line 1)
invoked from within
....
Wondering if it might be possible to improve gdb_test to have
gdb_test "python print(objfile.filename)" "None" \
"objfile.filename after objfile is unloaded"
reporting a failed result instead of just producing the internal error.
|
|
If the commands of the bpstat bs contain commands such as step or next or
continue, the BS and its commands are freed by execute_control_command.
So, we cannot remember the BS that was printed. Instead, remember
the bpnum and locno.
Regtested on debian/amd64 and re-run a few tests under valgrind.
|
|
step-over-syscall.exp has some specific tests for gdbserver.
The regexp matching breakpoint hit must take the added locno into account.
Test re-run in 3 modes (normal, native-gdbserver and native-extended-gdbserver).
|
|
For targets with secext, msp and psp can be seen as an alias for one
of msp_s, msp_ns, psp_s or psp_ns.
Without this patch, sp might be secure, but msp or psp is non-secure
(this state can not happen in the hardware).
Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
|
|
For targets with secext, msp and psp can be seen as an alias for one
of msp_s, msp_ns, psp_s or psp_ns. When switching active sp, the
corresponding msp/psp needs to be switched too.
Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
|
|
Some gdb stubs may not describe the type for vector registers in the
tdesc-xml and only send bitsize="128", gdb can't deal with a reg
with default type int with bitsize==128. So Just return csky_vector_type()
for vector resgisters.
|
|
When reg_nr is one of the float and vector pseudo registers,
return builtin_type (gdbarch)->builtin_int32 for it.
|
|
sol-thread.c fails to compile on 32-bit Solaris: there are several
instances of
In file included from /vol/src/gnu/gdb/hg/master/local/gdb/../gdbsupport/common-defs.h:203,
from /vol/src/gnu/gdb/hg/master/local/gdb/defs.h:28,
from /vol/src/gnu/gdb/hg/master/local/gdb/sol-thread.c:51:
/vol/src/gnu/gdb/hg/master/local/gdb/sol-thread.c: In member function ‘virtual void sol_thread_target::resume(ptid_t, int, gdb_signal)’:
/vol/src/gnu/gdb/hg/master/local/gdb/sol-thread.c:416:20: error: format ‘%ld’ expects argument of type ‘long int’, but argument 2 has type ‘ULONGEST’ {aka ‘long long unsigned int’} [-Werror=format=]
416 | warning (_("Specified thread %ld seems to have terminated"),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/vol/src/gnu/gdb/hg/master/local/gdb/../gdbsupport/gdb_locale.h:28:29:
note: in definition of macro ‘_’
28 | # define _(String) gettext (String)
| ^~~~~~
/vol/src/gnu/gdb/hg/master/local/gdb/sol-thread.c:416:40: note: format
string is defined here
416 | warning (_("Specified thread %ld seems to have terminated"),
| ~~^
| |
| long int
| %lld
Fixed by using pulongest () instead.
Tested on i386-pc-solaris2.11, amd64-pc-solaris2.11,
sparc-sun-solaris2.11, and sparcv9-sun-solaris2.11 (together with
Simon's patch for PR build/29798).
|
|
ctxobj.exp fails randomly when computer is loaded.
With the addition of $gdb_prompt in the regexp testing for breakpoint hit,
I could not make it fail anymore.
Also fixed a typo in a comment.
|
|
$_hit_locno PR breakpoints/12464
This implements the request given in PR breakpoints/12464.
Before this patch, when a breakpoint that has multiple locations is reached,
GDB printed:
Thread 1 "zeoes" hit Breakpoint 1, some_func () at somefunc1.c:5
This patch changes the message so that bkpt_print_id prints the precise
encountered breakpoint:
Thread 1 "zeoes" hit Breakpoint 1.2, some_func () at somefunc1.c:5
In mi mode, bkpt_print_id also (optionally) prints a new table field "locno":
locno is printed when the breakpoint hit has more than one location.
Note that according to the GDB user manual node 'GDB/MI Development and Front
Ends', it is ok to add new fields without changing the MI version.
Also, when a breakpoint is reached, the convenience variables
$_hit_bpnum and $_hit_locno are set to the encountered breakpoint number
and location number.
$_hit_bpnum and $_hit_locno can a.o. be used in the command list of a
breakpoint, to disable the specific encountered breakpoint, e.g.
disable $_hit_bpnum.$_hit_locno
In case the breakpoint has only one location, $_hit_locno is set to
the value 1, so as to allow a command such as:
disable $_hit_bpnum.$_hit_locno
to disable the breakpoint even when the breakpoint has only one location.
This also fixes a strange behaviour: when a breakpoint X has only
one location,
enable|disable X.1
is accepted but transforms the breakpoint in a multiple locations
breakpoint having only one location.
The changes in RFA v4 handle the comments of Tom Tromey:
- Changed convenience var names from $bkptno/$locno to
$_hit_bpnum/$_hit_locno.
- updated the tests and user manual accordingly.
User manual also explictly describes that $_hit_locno is set to 1
for a breakpoint with a single location.
- The variable values are now set in bpstat_do_actions_1 so that
they are set for silent breakpoints, and when several breakpoints
are hit at the same time, that the variables are set to the printed
breakpoint.
The changes in RFA v3 handle the additional comments of Eli:
GDB/NEW:
- Use max 80-column
- Use 'code location' instead of 'location'.
- Fix typo $bkpno
- Ensure that disable $bkptno and disable $bkptno.$locno have
each their explanation inthe example
- Reworded the 'breakpoint-hit' paragraph.
gdb.texinfo:
- Use 'code location' instead of 'location'.
- Add a note to clarify the distinction between $bkptno and $bpnum.
- Use @kbd instead of examples with only one command.
Compared to RFA v1, the changes in v2 handle the comments given by
Keith Seitz and Eli Zaretskii:
- Use %s for the result of paddress
- Use bkptno_numopt_re instead of 2 different -re cases
- use C@t{++}
- Add index entries for $bkptno and $locno
- Added an example for "locno" in the mi interface
- Added examples in the Break command manual.
|
|
Currently, FinishBreakpoints are set at the return address of a frame based on
the `finish' command, and are meant to be temporary breakpoints. However, they
are not being cleaned up after use, as reported in PR python/18655. This was
happening because the disposition of the breakpoint was not being set
correctly.
This commit fixes this issue by correctly setting the disposition in the
post-stop hook of the breakpoint. It also adds a test to ensure this feature
isn't regressed in the future.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=18655
|
|
When building on Ubuntu 22.04, gcc 12, x86-64 with -m32 and -O2, I get:
CXX symtab.o
/home/smarchi/src/binutils-gdb/gdb/symtab.c: In member function ‘std::vector<symbol_search> global_symbol_searcher::search() const’:
/home/smarchi/src/binutils-gdb/gdb/symtab.c:4961:44: error: ‘__builtin___sprintf_chk’ may write a terminating nul past the end of the destination [-Werror=format-overflow=]
4961 | sprintf (tmp, "operator%.*s%s", fix, " ", opname);
| ^
In file included from /usr/include/stdio.h:894,
from ../gnulib/import/stdio.h:43,
from /home/smarchi/src/binutils-gdb/gdb/../gdbsupport/common-defs.h:86,
from /home/smarchi/src/binutils-gdb/gdb/defs.h:28,
from /home/smarchi/src/binutils-gdb/gdb/symtab.c:20:
In function ‘int sprintf(char*, const char*, ...)’,
inlined from ‘std::vector<symbol_search> global_symbol_searcher::search() const’ at /home/smarchi/src/binutils-gdb/gdb/symtab.c:4961:16:
/usr/include/i386-linux-gnu/bits/stdio2.h:38:34: note: ‘__builtin___sprintf_chk’ output between 9 and 2147483648 bytes into a destination of size 2147483647
38 | return __builtin___sprintf_chk (__s, __USE_FORTIFY_LEVEL - 1,
| ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
39 | __glibc_objsize (__s), __fmt,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
40 | __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~
PR build/29798 shows a similar error message but on Solaris.
Work around that by using string_printf. It is a good thing to get rid
of the alloca anyway.
Change-Id: Ifbac11fee3062ad7f134d596b4e2229dc5d166f9
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29798
|
|
Convert the gdb.cp/call-method-register.exp test to make use of the
DWARF assembler.
The existing gdb.cp/call-method-register.exp test relies on a GCC
extension - forcing a local variable into a particular named register.
This means that the test will only work with Clang, and, as we have to
name the register into which the variable will be placed, will only
work for those targets where we've selected a suitable register,
currently this is x86-64, i386, and ppc64.
By switching to the DWARF assembler, the test will work with gcc and
clang, and should work on most, if not all, architectures.
The test creates a small structure, something that can fit within a
register, and then tries to call a method on the structure from within
GDB. This should fail because GDB can't take the address of the in
register structure (for the `this` pointer).
As the test is for a failure case, then we don't really care _which_
register the structure is in, and I take advantage of this for the
DWARF assembler test, I just declare that the variable is in
DW_OP_reg0, whatever that might be. I've tested the new test on
x86-64, ppc, aarch64, and risc-v, and the test runs, and passes on all
these architectures, which is already more than we used to cover.
Additionally, on x86-64, I've tested with Clang and gcc, and the test
runs and passed with both compilers.
Reviewed-By: Lancelot SIX <lancelot.six@amd.com>
|
|
The gdb.debuginfod/fetch_src_and_symbols.exp test is showing a single
failure when run with some older versions of Clang, e.g. 9.0.1.
The problem appears to be with Clang's generated line table. The test
source looks like this:
int
main()
{
asm ("main_label: .globl main_label");
return 0;
}
In GDB, when we 'start', we expect to stop at the 'return 0;' line.
This is the behaviour when the compiler is gcc, or later versions of
Clang.
However, with Clang 9.0.2, I see GDB stop on the 'asm' line.
In this commit I'll fix this issue by placing a breakpoint on the
return line, and then using gdb_continue_to_breakpoint to ensure we
have stopped in the correct place.
Of course, using gdb_continue_to_breakpoint will only work if we are
not already stopped at the breakpoint location, so I've added some
filler work before the 'return 0;' line. With this done we can use
gdb_continue_to_breakpoint in all cases.
As a result of adding the new filler work, one of the later tests,
that used the 'list' command, no longer see the correct expected
output (the top line of the source file is no longer included in the
output). I've fixed this by listing a known specific line, the test
is checking that GDB managed to find the source file, it doesn't
matter which source line we list, as long as we can list something.
|
|
The test gdb.debuginfod/fetch_src_and_symbols.exp uses a source file
named main.c. I can't see any particular reason why the file is named
as such.
Usually test source files are named after the test script.
This commit just renames the source file inline with the test script,
and updates the call to standard_testfile (removing the reference to
main.c).
There's no particular reason for this change other than seeing the
file named main.c made me thing that the source file must be shared
with some other test (it isn't).
There should be no change in what is tested after this commit.
|
|
I noticed that the gdb.debuginfod/fetch_src_and_symbols.exp test was
failing when run with Clang as the compiler.
This test relies on the compiled binaries having a build-id within
them. For GCC, really GNU ld, the default is to always include a
build-id.
When compiling with Clang though, the default is for no build-id.
I did consider *always* turning on the build-id feature when the
compiler is Clang, but that felt a little weird.
Instead, I propose that we add a new 'build-id' compiler option to
gdb_compile, this flag indicates that the test _requires_ a build-id.
In gcc_compile we can then add the required flags if the compiler is
Clang so that we do get a build-id.
With this change the gdb.debuginfod/fetch_src_and_symbols.exp test
now (mostly) passes with Clang 9.0.1 and 15.0.2, and still passes with
gcc. The 'mostly' part is an unrelated issue, and will be addressed
in a later commit in this series.
Reviewed-By: Lancelot SIX <lancelot.six@amd.com>
|
|
I noticed that the gdb.compile/compile-ops.exp test was failing when
run with Clang as the compiler.
This test makes use of the DWARF assembler, and, it turns out, uses
a technique which is not portable to Clang. This problem is
described in the comment on the function_range proc in lib/dwarf.exp,
the explanation is:
# If the compiler is gcc, we can do the following to get function start
# and end address too:
#
# asm ("func_start: .globl func_start");
# static void func (void) {}
# asm ("func_end: .globl func_end");
#
# however, this isn't portable, because other compilers, such as clang,
# may not guarantee the order of global asms and function. The code
# becomes:
#
# asm ("func_start: .globl func_start");
# asm ("func_end: .globl func_end");
# static void func (void) {}
These start/end labels are used for computing the function start, end,
and length. The portable solution is to place a label within the
function, like this:
# int main (void)
# {
# asm ("main_label: .globl main_label");
# return 0;
# }
And make use of 'proc function_range' (from lib/dwarf.exp).
So, that's what I do in this commit.
One consequence of this change is that we need to compile the source
file, and have it loaded into a GDB session, before calling
function_range, so I've added an early call to prepare_for_testing.
Additionally, this test script was generating the DWARF assembler into
a file called gdbjit-ops.S, I suspect a copy and paste issue there, so
I've switched this to use compile-ops-dbg.S instead, which is more
inline with what other DWARF assembler tests do.
The only other change, which might be a problem, is that I also
deleted these two lines from the source file:
asm (".section \".text\"");
asm (".balign 8");
These lines were setting the alignment of the .text section. What I
don't know is whether this was significant or not. If it is
significant, then I can't see why.
On x86-64, the test still passes fine without these lines, but that
doesn't mean the test wont start failing on some other architecture.
Still, I figure, lets remove them, then, if/when we find a test that
starts failing, we can add the lines back, along with an explanation
for why the extra alignment is required.
But, if people would prefer to be more conservative, then I'm happy to
just add the lines back.
Reviewed-By: Lancelot SIX <lancelot.six@amd.com>
|
|
I noticed that the test gdb.trace/unavailable-dwarf-piece.exp was
failing when run with Clang. Or rather, the test was not running as
the test executable failed to compile.
The problem is that Clang was emitting this warning:
warning: argument unused during compilation: '-fdiagnostics-color=never' [-Wunused-command-line-argument]
This warning is emitted when compiling the assembler file generated
by the DWARF assembler.
Most DWARF assembler tests generate the assembler file into a file
with the '.S' extension. However, this particular test uses a '.s'
extension.
Now a .S file will be passed through the preprocessor, while a .s will
be sent straight to the assembler. My guess is that Clang doesn't
support the -fdiagnostics-color=never option for the assembler, but
does for the preprocessor.
That's a little annoying, but easily worked around. We don't care if
our assembler file is passed through the preprocessor, so, in this
commit, I just change the file extension from .s to .S, and the
problem is fixed.
Currently, the unavailable-dwarf-piece.exp script names the assembler
file using standard_output_file, in this commit I've switched to make
use of standard_testfile, as that seems to be the more common way of
doing this sort of thing.
With these changes the test now passes with Clang 9.0.1 and 15.0.2,
and also still passes with gcc.
Reviewed-By: Lancelot SIX <lancelot.six@amd.com>
|
|
Two tests make the claim that the DWARF assembler requires gcc,
however, this isn't true. I think at one point, when the DWARF
assembler was first added, we did use some techniques that were not
portable (see the comments in lib/dwarf.exp on function_range for
details), however, I think most DWARF assembler tests will now work
fine with Clang.
The two tests that I modify in this commit both work fine with Clang,
at least, I've tested with Clang 9.0.1 and 15.0.2, and don't see any
problems, so I'm removing the early return logic that stops these
tests from running with Clang.
Reviewed-By: Lancelot SIX <lancelot.six@amd.com>
|
|
This patch fixes a static initialization order problem in
windows-nat.c that was pointed out by Jon Turney. The underlying
problem is that the windows_nat_target constructor relies on
serial_logfile already being constructed, but this is not enforced by
C++ rules. This patch fixes the problem by initializing the global
windows_nat_target later.
|
|
Support for printining non-trivial return values was recently added in
commit:
commit a0eda3df5b750ae32576a9be092b361281a41787
Author: Carl Love <cel@us.ibm.com>
Date: Mon Nov 14 16:22:37 2022 -0500
PowerPC, fix support for printing the function return value for non-trivial values.
The functionality can now be used to fix gdb.base/retval-large-struct.exp.
The test just needs to be compiled with -fvar-tracking to enable GDB to
determine the address off the return buffer when the function is called.
The current output from the test:
34 return big_struct;
(gdb) PASS: gdb.base/retval-large-struct.exp: continue to breakpoint: Break in print_large_struct
finish
warning: Cannot determine the function return value.
Try compiling with -fvar-tracking.
Run till exit from #0 return_large_struct () at binutils-gdb-current/gdb/testsuite/gdb.base/retval-large-struct.c:34
main (argc=1, argv=0x7fffffffcd58) at binutils-gdb-current/gdb/testsuite/gdb.base/retval-large-struct.c:44
44 return 0;
Value returned has type: struct big_struct_t. Cannot determine contents
(gdb) FAIL: gdb.base/retval-large-struct.exp: finish from return_large_struct
testcase binutils-gdb-current/gdb/testsuite/gdb.base/retval-large-struct.exp completed in 1 seconds
This patch adds the command line argument -fvar-tracking to enable gdb to
determine the return vaule and thus fixing the test.
Patch tested on Power 10 with no regressions.
|
|
I noticed a couple of spots that used '0' rather than 'false' when
modifying pagination_enabled. This patch cleans these up.
|
|
The GDB coding standard specifies that nullptr should be used instead of
NULL. There are numerous uses of NULL and nullptr in files infcmd.c and
infrun.c. This patch replaces the various uses of NULL with nullptr in
the source files. The use of NULL in the comments was not changed.
The patch does not introduce any functional changes.
The patch has been tested on PowerPC and Intel X86_64 with no new unexpected
test failures, unresolved tests, new core files etc.
|
|
Add a new convenience variable $_inferior_thread_count that contains
the number of live (non-exited) threads in the current inferior. This
can be used in command scripts, or breakpoint conditions, etc to
adjust the behaviour for multi-threaded inferiors.
This value is only stable in all-stop mode. In non-stop mode, where
new threads can be started, and existing threads exit, at any time,
this convenience variable can give a different value each time it is
evaluated.
|
|
I happened to find a couple of obsolete declarations in cli-interp.h.
This patch removes them. Tested by rebuilding.
|
|
While working on another patch I noticed that, when run on an AArch64
target, the test gdb.python/py-send-packet.exp was failing:
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/tmp/build/gdb/testsuite/outputs/gdb.python/py-send-packet/py-send-packet.py",
line 106, in run_auxv_send_packet_test
assert string == expected_result
AssertionError
Error while executing Python code.
(gdb) FAIL: gdb.python/py-send-packet.exp: call python run_auxv_send_packet_test function
The test uses 'maint packet ...' to send a packet to gdbserver, and
then captures the output in TCL. This output is then passed through
to a Python function, which performs some actions using the Python
API, and compares the results from the Python API to the results
captured in TCL from 'maint packet ...'.
The problem is that the output captured in TCL contains lots of things
like '\x000', when this is passed through to Python the '\x' causes
this to be treated as an escape code, which isn't what we want - we
want the actual string "\x000".
So, in the TCL part of the test we were expanding '\x' to '\\x', this
seemed to work fine for my testing on x86-64.
However, on AArch64 what I see is that the results from 'maint packet
...' contain a literal '\' character followed by a literal 'x'
character. When GDB prints this in the 'maint packet' output, GDB
escapes the '\' for us, thus we get '\\x' printed by 'maint packet'.
However, now our TCL test script kicks in and tries to "fix" the '\x',
this means we now have '\\\x', which isn't correct.
The problem is that in the TCL script we are too restrictive, we
expand '\x' to '\\x', but really, we should be expanding all '\'
characters, regardless of what follows them. This is what this patch
does.
After this the gdb.python/py-send-packet.exp test passes on AArch64
for me.
|
|
In AIX for 64 bit programs we need to zero extend variables
of integer or enum or char data type.
Otherwise a zero will get dumped in the register as we memset
our word to 0 and we copy non zero extended contents to the cache.
|
|
While looking through the Fortran tests, I couldn't find a test of GDB
printing the value and type of a Fortran string defined using the
'character*SIZE' notation.
This works fine in GDB right now, but I thought it wouldn't hurt to
have a test for this, so this commit adds such a test.
The test also includes printing a string that includes some embedded
special characters: \n \r \t \000 - that's right, as Fortran strings
are stored as an address and length, it is fine to include an embedded
null, so this test includes an example of that.
Standard Fortran doesn't support backslash escape sequences within
strings, the special characters must be generated using the `achar`
function. However, when GDB prints the strings we currently print
using the standard C like backslash sequences.
I'm not currently proposing to change that behaviour, the backslash
sequences are more compact than the standard Fortran way of doing
things, and are so widely used that I suspect most Fortran programmers
will understand them.
|
|
procfs.c has accumulated several compilation errors lately (some of them
new with GCC 12), which are fixed by this patch:
* auxv_parse gets:
/vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c:144:7: error: int
procfs_target::auxv_parse(gdb_byte**, gdb_byte*, CORE_ADDR*, CORE_ADDR*)
marked override, but does not override
144 | int auxv_parse (gdb_byte **readptr,
| ^~~~~~~~~~
Obviouly, procfs.c was missed in the auxv_parse constification.
* dead_procinfo has:
/vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c: In function void
dead_procinfo(procinfo*, const char*, int):
/vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c:563:11: warning: the address
of procinfo::pathname will never be NULL [-Waddress]
563 | if (pi->pathname)
| ~~~~^~~~~~~~
/vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c:238:8: note:
procinfo::pathname declared here
238 | char pathname[MAX_PROC_NAME_SIZE]; /* Pathname to /proc entry */
| ^~~~~~~~
The warning is correct, so the code can lose support for the NULL
pathname case.
* create_inferior has this ugly warning:
/vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c: In member function virtual void procfs_target::create_inferior(const char*, const std::string&, char**, int):
/vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c:2815:19: warning: char* std::strncpy(char*, const char*, size_t) output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation]
2815 | strncpy (tryname, p, len);
| ~~~~~~~~^~~~~~~~~~~~~~~~~
/vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c:2814:26: note: length computed here
2814 | len = strlen (p);
| ~~~~~~~^~~
It seems that this is another case of GCC PR middle-end/88059, which
Martin Sebor refuses to fix. So I'm using the hack suggested in the
PR to use memcpy instead of strncpy.
* find_memory_regions_callback fails with
/vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c: In function int find_memory_regions_callback(prmap*, find_memory_region_ftype, void*):
/vol/src/gnu/gdb/hg/master/dist/gdb/procfs.c:3167:18: error: too few arguments to function
3167 | return (*func) ((CORE_ADDR) map->pr_vaddr,
| ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
3168 | map->pr_size,
| ~~~~~~~~~~~~~
3169 | (map->pr_mflags & MA_READ) != 0,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3170 | (map->pr_mflags & MA_WRITE) != 0,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3171 | (map->pr_mflags & MA_EXEC) != 0,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3172 | 1, /* MODIFIED is unknown, pass it as true. */
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3173 | data);
| ~~~~~
Again, procfs.c was overlooked when adding the new memory_tagged arg.
Unfortunately, it wasn't even documented in gdb/defs.h when it was
added in
commit 68cffbbd4406b4efe1aa6e18460b1d7ca02549f1
Author: Luis Machado <luis.machado@arm.com>
Date: Thu Mar 31 11:42:35 2022 +0100
[AArch64] MTE corefile support
With those changes, procfs.c compiles again. Together with the hack
from the Solaris gdbsupport breakage reported in PR build/29791, I was
able to build and test gdb on both amd64-pc-solaris2.11 and
sparcv9-sun-solaris2.11.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
|
|
I noticed:
...
DUPLICATE: gdb.arch/ppc-fp.exp: next
...
Fix this by adding unique test names.
Tested on powerpc64le-linux.
|
|
|
|
On x86_64-windows, since 04e2ac7b2a7, we observe this internal error:
[...]/gdbsupport/intrusive_list.h:458: internal-error: erase_element:
Assertion `elem_node->prev != INTRUSIVE_LIST_UNLINKED_VALUE' failed.
Breaking in the destructors for intrusive_list and frame_info_ptr shows that
in this configuration, the destructors for frame.c's statically-stored
objects are run before frame-info.c's:
Thread 1 hit Breakpoint 7, intrusive_list<frame_info_ptr,
intrusive_base_node<frame_info_ptr> >::~intrusive_list (this=0x7ff69c418c90
<frame_info_ptr::frame_list>, __in_chrg=<optimized out>)
[...]/../gdbsupport/intrusive_list.h:250
250 clear ();
(gdb) bt
#0 intrusive_list<frame_info_ptr, intrusive_base_node<frame_info_ptr> >
::~intrusive_list (this=0x7ff69c418c90 <frame_info_ptr::frame_list>,
__in_chrg=<optimized out>) [...]/../gdbsupport/intrusive_list.h:250
#1 0x00007ff69b78edba in __tcf_1 () [...]/frame-info.c:27
#2 0x00007ff9c457aa9f in msvcrt!_initterm_e ()
from C:\Windows\System32\msvcrt.dll
#3 0x00007ff69b8246a6 in captured_main_1 (context=0x5ffe00)
[...]/main.c:1111
#4 0x00007ff69b825149 in captured_main (data=0x5ffe00) [...]/main.c:1320
#5 0x00007ff69b8251b1 in gdb_main (args=0x5ffe00) [...]/main.c:1345
#6 0x00007ff69b5d1730 in main (argc=2, argv=0x751730) [...]/gdb.c:32
(gdb) c
Continuing.
Thread 1 hit Breakpoint 8, frame_info_ptr::~frame_info_ptr
(this=0x7ff69c418e20 <selected_frame>, __in_chrg=<optimized out>)
[...]/frame-info.h:74
74 if (is_linked ())
(gdb) bt
#0 frame_info_ptr::~frame_info_ptr (this=0x7ff69c418e20 <selected_frame>,
__in_chrg=<optimized out>) [...]/frame-info.h:74
#1 0x00007ff69b79a643 in __tcf_1 () [...]/frame.c:1675
#2 0x00007ff9c457aa9f in msvcrt!_initterm_e () from
C:\Windows\System32\msvcrt.dll
#3 0x00007ff69b8246a6 in captured_main_1 (context=0x5ffe00)
[...]/main.c:1111
#4 0x00007ff69b825149 in captured_main (data=0x5ffe00) [...]/main.c:1320
#5 0x00007ff69b8251b1 in gdb_main (args=0x5ffe00) [...]/main.c:1345
#6 0x00007ff69b5d1730 in main (argc=2, argv=0x751730) [...]/gdb.c:32
Approved-By: Simon Marchi <simon.marchi@efficios.com>
|
|
I noticed a plain gcore command in test-case gdb.threads/gcore-thread.exp:
...
gdb_test "gcore $core0file" "Saved corefile .*" \
"save a zeroed-threads corefile"
...
Use gdb_gcore_cmd instead.
Tested on x86_64-linux.
|
|
The recent commit:
commit a0eda3df5b750ae32576a9be092b361281a41787
Author: Carl Love <cel@us.ibm.com>
Date: Mon Nov 14 16:22:37 2022 -0500
PowerPC, fix support for printing the function return value for non-trivial values.
Is generating a segmentation fault on x86_64-linux.
segfault:
...
PASS: gdb.asm/asm-source.exp: info source asmsrc1.s
ERROR: GDB process no longer exists
UNRESOLVED: gdb.asm/asm-source.exp: finish from foo3
...
Reproduced on command line:
...
$ gdb -q -batch -x outputs/gdb.asm/asm-source/gdb.in.1
...
The problem seems to be that:
...
Thread 1 "gdb" received signal SIGSEGV, Segmentation fault.
0x000000000043de7a in symbol::type (this=0x0) at
.../gdb_versions/devel/src/gdb/symtab.h:1287
1287 return m_type;
...
because:
...
(gdb) up
#1 0x0000000000852d94 in finish_command (arg=0x0, from_tty=0)
at .../gdb_versions/devel/src/gdb/infcmd.c:1887
1887 = check_typedef (sm->function->type ()->target_type ());
(gdb) p sm->function
$1 = (symbol *) 0x0
The code is not checking if sm->function is NULL. If sm->function is NULL
the check for the return buffer should be skipped.
|
|
My co-worker Kévin noticed that the Ada tasks documentation is
slightly out of date -- it does not document all the states that can
be reported by ada-tasks.c.
This patch adds the missing states to the appropriate node, and
updates one state to reflect a change made some time ago.
|
|
As discussed at:
https://sourceware.org/pipermail/gdb-patches/2020-June/169519.html
this patch disables source and assembly code highlighting for the
text highlighted by the TUI's current position indicator, and adds a
command to enable it back.
|
|
I noticed in test-case gdb.arch/i386-biarch-core.exp that we run into the
completion limit for "complete set gnutarget":
...
set gnutarget vms-libtxt^M
set gnutarget *** List may be truncated, max-completions reached. ***^M
(gdb) PASS: gdb.arch/i386-biarch-core.exp: complete set gnutarget
...
Fix this by using get_set_option_choices.
Also use get_set_option_choices for "complete set architecture i386", which
required extending get_set_option_choices to accept a second argument, such
that we can do:
...
set archs [get_set_option_choices "set architecture" "i386"]
...
because this returns an empty list:
...
set archs [get_set_option_choices "set architecture i386"]
...
because it does "complete set architecture i386 ".
Also clean up the explicit gdb_exit/gdb_start and use clean_restart instead.
Tested on x86_64-linux.
|
|
After de-installing bzip2, I run into:
...
Running ppc64-symtab-cordic.exp ...
sh: bzip2: command not found
PATH: gdb.arch/ppc64-symtab-cordic.exp: failed bzip2 for \
src/gdb/testsuite/gdb.arch/cordic.ko.bz2
...
Fix these by:
- using remote_exec instead of catch system, and
- using file tail in the untested message.
I've tried making output redirection work with remote_exec, but that seems to
be broken, so we now:
- copy the file $f.bz2 into the desired location $dir/$f.bz2, and
- decompress the bz2 file using "bzip2 -df $dir/$f.bz2", resulting in a file
$dir/$f.
Factor out new function decompress_bz2 to make the test-case less verbose, and
also use it in gdb.arch/i386-biarch-core.exp.
Tested on x86_64-linux, without and with bzip2 installed.
|
|
The commit bbaabc767a4293492817a0840819aef2768cce90 introduced an
incorrect thunk for the `configure' script. This patch regenerates
configure by calling autoreconf.
|
|
The GDB_AC_CHECK_BFD macro defined in gdb/acinclude.m4 uses the
AC_LINK_IFELSE autoconf macro in order to link a simple program to
check features of libbfd.
If libbfd's link dependencies change, it was necessary to reflect them
either in the definition of the macro, or as a consequence of checking
for them with an autoconf macro resulting in an addition to LIBS.
This patch modifies the definition of the GDB_CHECK_BFD macro in order
to use libtool to perform the test link. This makes it possible to
not have to list dependencies of libbfd (which are indirect to GDB) at
all.
After this patch:
configure:28553: checking for ELF support in BFD
configure:28573: ./libtool --quiet --mode=link gcc -o conftest \
-I../../gdb/../include -I../bfd \
-I../../gdb/../bfd -g -O2 \
-L../bfd -L../libiberty conftest.c -lbfd -liberty \
-lncursesw -lm -ldl >&5
configure:28573: $? = 0
configure:28583: result: yes
Tests performed:
- Configure --with-system-zlib and --without-system-zlib.
- Check link dependencies of installed GDB with both --enable-shared
and --disable-shared.
- Run installed GDB in both cases.
Approved-By: Simon Marchi <simon.marchi@efficios.com>
|
|
The "varstring" paramter to ada_print_type can be null, but one spot
failed to check this. This could cause a crash in some situations.
As this is Ada-specific, and we've been using it internally at AdaCore
for a while, I am going to push it.
|
|
I get some random failures since commit 8d45c3a82a0e ("[gdb/testsuite]
Set completions to unlimited in get_set_option_choices"), which can be
reproduced with:
$ make check-read1 TESTS="gdb.base/parse_number.exp"
For instance:
set architecture A^M
Ambiguous item "A".^M
(gdb) FAIL: gdb.base/parse_number.exp: arch=A: set architecture A
The problem is the regexp in get_set_option_choices, it is possible that
is only matches part of a completion result. With check-read1, that is
always one letter.
Fix this by expecting the \r\n at the end of the line, so we only match
entire results. Use ^ in match patterns to ensure we don't miss any
output.
Approved-By: Tom de Vries <tdevries@suse.de>
Change-Id: Ib1733737feab7dde0f7095866e089081a891054e
|
|
Currently for the target board remote-gdbserver-on-localhost we use the
gdbserver file on build, using a file name which includes "/../".
Fix this by using a normalized file name instead.
This allows us to be more restrictive about which files REMOTE_TARGET_USERNAME
can access:
...
- remote_exec build "chmod go-rx $objdir/outputs"
+ remote_exec build "chmod go-rx $objdir"
...
Tested on x86_64-linux.
|
|
With test-case gdb.base/jit-elf-so.exp and target board
remote-gdbserver-on-localhost (using REMOTE_TARGET_USERNAME) we run into some
failures.
Fix these by:
- setting jit_libname with the name as returned by gdb_load_shlib
- allowing the libraries to be prefixed with the remote target directory.
Tested on x86_64-linux.
Co-Authored-by: Ivan Tetyushkin <ivan.tetyushkin@syntacore.com>
|
|
With test-case gdb.base/jit-reader-exec.exp and target board
remote-gdbserver-on-localhost (using REMOTE_TARGET_USERNAME) we run into some
failures.
Fix this by adding the missing gdb_remote_download.
Tested on x86_64-linux.
Co-Authored-by: Ivan Tetyushkin <ivan.tetyushkin@syntacore.com>
|
|
With test-case gdb.base/info-shared.exp and target board
remote-gdbserver-on-localhost (using REMOTE_TARGET_USERNAME) we run into some
failures.
Fix these by adding the missing gdb_load_shlib.
Tested on x86_64-linux.
Co-Authored-by: Ivan Tetyushkin <ivan.tetyushkin@syntacore.com>
|
