| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When an alias name starts with the name of another alias,
GDB was accepting to define the aliases in one order (short first, long after),
but refused it the other way around.
So, fix the logic to recognise an already existing alias by using
lookup_cmd_composition.
Also, this revealed a bug in lookup_cmd_composition:
when the searched command is a prefix command, lookup_cmd_composition
was not returning the fact that a command was found even if the
TEXT to parse was fully consumed.
gdb/ChangeLog
YYYY-MM-DD Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-cmds.c (alias_command): Check for an existing alias
using lookup_cmd_composition, as valid_command_p is too strict
and forbids aliases that are the prefix of an existing alias
or command.
* cli/cli-decode.c (lookup_cmd_composition): Ensure a prefix
command is properly recognised as a valid command.
gdb/testsuite/ChangeLog
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/alias.exp: Test aliases starting with a prefix of
another alias.
|
|
The GDB data structure that records the GDB commands is made of
'struct cmd_list_element' defined in cli-decode.h.
A cmd_list_element has various pointers to other cmd_list_element structures,
All these pointers are together building a graph of commands.
However, when following the 'next' and '*prefixlist' pointers of
cmd_list_element, the structure must better be a tree.
If such pointers do not form a tree, then some other elements of
cmd_list_element cannot get a correct semantic. In particular, the prefixname
has no correct meaning if the same prefix command can be reached via 2 different
paths.
This commit introduces a selftest that detects (at least some cases of) errors
leading to 'next' and '*prefixlist' not giving a tree structure.
The new 'command_structure_invariants' selftest detects one single case where
the command structure is not a tree:
(gdb) maintenance selftest command_structure_invariants
Running selftest command_structure_invariants.
list 0x56362e204b98 duplicated, reachable via prefix 'show ' and 'info set '. Duplicated list first command is 'ada'
Self test failed: self-test failed at ../../classfix/gdb/unittests/command-def-selftests.c:160
Ran 1 unit tests, 1 failed
(gdb)
This was fixed by the previous commit.
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* unittests/help-doc-selftests.c: Rename to
unittests/command-def-selftests.c
* unittests/command-def-selftests.c (help_doc_tests): Update some
comments.
(command_structure_tests, traverse_command_structure): New namespace
and function.
(command_structure_invariants_tests): New function.
(_initialize_command_def_selftests) Renamed from
_initialize_help_doc_selftests, register command_structure_invariants
selftest.
|
|
The next commit introduces a selftest that detects when the GDB
command structure does not define a tree when using the pointers
'next/*prefixlist'. This test detects one such case, fixed
by this commit.
The command 'info set' was defined as a specific prefix command,
but re-using the command list already used for the 'show' command.
This leads to the command tree 'next/*prefixlist' to not be a tree.
This change defines 'info set ' as an alias, thereby fixing the selftest.
2020-05-15 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* cli/cli-cmds.c (_initialize_cli_cmds): Define 'info set' as
an alias of 'show'.
|
|
The purpose of this patch is to prepare for the future where
fixed point types become described using standard DWARF info,
rather than GNAT encodings. For that, we rename a number of
routines manipulating Ada fixed point types to make it explicit
from their new names that they rely on the GNAT encodings to work.
This will allow us, when we introduce support for fixed point types
from standard DWARF to use names that are not ambiguous with
the functions that do similar work, but only for GNAT encodings.
gdb/ChangeLog:
* ada-lang.h: (ada_is_gnat_encoded_fixed_point_type): Renames
ada_is_fixed_point_type. Update all callers.
(gnat_encoded_fixed_point_delta): Renames ada_delta. Update
all callers.
* ada-lang.c (gnat_encoded_fixed_type_info): Renames fixed_type_info.
Update all callers.
* ada-typeprint.c (print_gnat_encoded_fixed_point_type): Renames
print_fixed_point_type. Update all callers.
* ada-valprint.c (ada_value_print_num): Replace call to
ada_is_fixed_point_type by ada_is_gnat_encoded_fixed_point_type.
|
|
When running the testsuite with clang, a number of testcases fail to
build with the following errors:
warning: control reaches end of non-void function [-Wreturn-type]
warning: control may reach end of non-void function [-Wreturn-type]
This prevents a number of testcases from executing. This commit fixes.
gdb/testsuite/ChangeLog:
* gdb.base/info-os.c (main): Add return statement.
* gdb.base/info_minsym.c (minsym_fun): Likewise.
* gdb.base/large-frame-2.c (func): Likewise.
* gdb.base/pr10179-a.c (foo1, bar1): Likewise.
* gdb.base/pr10179-b.c (foo2): Likewise.
* gdb.base/valgrind-disp-step.c (foo): Likewise.
* gdb.base/watch-cond.c (func): Likewise.
* gdb.multi/goodbye.c (verylongfun): Likewise.
* gdb.multi/hello.c (commonfun): Likewise.
* gdb.python/py-finish-breakpoint.c (call_longjmp): Likewise.
* gdb.threads/fork-plus-threads.c (thread_func): Likewise.
* gdb.threads/forking-threads-plus-breakpoint.c (thread_forks):
Likewise.
* gdb.threads/hand-call-new-thread.c (foo): Likewise.
* gdb.threads/interrupt-while-step-over.c (child_function):
Likewise.
* gdb.trace/actions-changed.c (end): Likewise.
|
|
A number of tests silently exit if OpenCL support is not detected.
This commit fixes.
gdb/testsuite/ChangeLog:
* gdb.opencl/callfuncs.exp: Report when test skipped.
* gdb.opencl/convs_casts.exp: Likewise.
* gdb.opencl/datatypes.exp: Likewise.
* gdb.opencl/operators.exp: Likewise.
* gdb.opencl/vec_comps.exp: Likewise.
|
|
Say we have some common tcl code that we want to include in test-cases
t1.exp and t1.exp.
We could put the common code into a file common.exp alongside the test-cases,
but that will make dejagnu treat that file as another test-case. To prevent
this, we use a suffix, currently .in, in other words we put the common code in
a file common.exp.in.
The .in suffix however is also used in autoconf, which might cause confusion.
Change the suffix from .in to .tcl.
gdb/testsuite/ChangeLog:
2020-05-15 Tom de Vries <tdevries@suse.de>
* gdb.base/align.exp.in: Rename to ...
* gdb.base/align.exp.tcl: ... this.
* gdb.base/align-c++.exp: Update.
* gdb.base/align-c.exp: Update.
* gdb.base/all-architectures.exp.in: Rename to ...
* gdb.base/all-architectures.exp: ... this.
* gdb.base/all-architectures-0.exp: Update.
* gdb.base/all-architectures-1.exp: Update.
* gdb.base/all-architectures-2.exp: Update.
* gdb.base/all-architectures-3.exp: Update.
* gdb.base/all-architectures-4.exp: Update.
* gdb.base/all-architectures-5.exp: Update.
* gdb.base/all-architectures-6.exp: Update.
* gdb.base/all-architectures-7.exp: Update.
* gdb.base/infcall-nested-structs.exp.in: Rename to ...
* gdb.base/infcall-nested-structs.exp.tcl: ... this.
* gdb.base/infcall-nested-structs-c++.exp: Update.
* gdb.base/infcall-nested-structs-c.exp: Update.
* gdb.base/info-types.exp.in: Rename to ...
* gdb.base/info-types.exp.tcl: ... this.
* gdb.base/info-types-c++.exp: Update.
* gdb.base/info-types-c.exp: Update.
* gdb.base/max-depth.exp.in: Rename to ...
* gdb.base/max-depth.exp.tcl: ... this.
* gdb.base/max-depth-c++.exp: Update.
* gdb.base/max-depth-c.exp: Update.
* gdb.cp/cpexprs.exp.in: Rename to ...
* gdb.cp/cpexprs.exp.tcl: ... this.
* gdb.cp/cpexprs-debug-types.exp: Update.
* gdb.cp/cpexprs.exp: Update.
* gdb.cp/infcall-nodebug.exp.in: Rename to ...
* gdb.cp/infcall-nodebug.exp.tcl: ... this.
* gdb.cp/infcall-nodebug-c++-d0.exp: Update.
* gdb.cp/infcall-nodebug-c++-d1.exp: Update.
* gdb.cp/infcall-nodebug-c-d0.exp: Update.
* gdb.cp/infcall-nodebug-c-d1.exp: Update.
* gdb.dwarf2/clang-debug-names.exp.in: Rename to ...
* gdb.dwarf2/clang-debug-names.exp.tcl: ... this.
* gdb.dwarf2/clang-debug-names-2.exp: Update.
* gdb.dwarf2/clang-debug-names.exp: Update.
|
|
Revert this commit:
commit 843f4d93576eef02139f7b1b3fa1cea7b0f286f1
Date: Tue May 12 17:38:17 2020 +0100
gdb/testsuite: Disable path and duplicate checks when parallel testing
Now that this commit has landed:
commit c959562d9ba0b2eaf240c601b2c2fd49c42c1f2f
Date: Fri May 15 11:23:59 2020 +0100
contrib: Update dg-extract-results.* from gcc
We can now make use of the mechanism for detecting paths in test names
and duplicate test names, even when we run tests in parallel.
gdb/testsuite/ChangeLog:
* lib/check-test-names.exp: Remove code that prevents this file
loading when tests are run in parallel.
|
|
The previous patch misssed declaring the 'testpid' array as namespace
variable. While it at, might as well go back to having start_inferior
refer to the "global" testpid, using "variable" too.
gdb/testsuite/ChangeLog:
2020-05-15 Pedro Alves <palves@redhat.com>
* gdb.multi/multi-kill.exp (start_inferior): Remove
'testpid' parameter. Refer to namespace variable directly.
(testpid): Declare as namespace variable.
|
|
The new gdb.multi/multi-kill.exp testcase added an 'testpid' array,
which may conflict with other global 'testpid' variables used by other
testcases, resulting in:
...
ERROR: tcl error sourcing
/data/gdb_versions/devel/src/gdb/testsuite/gdb.multi/multi-kill.exp.
ERROR: can't set "testpid(1)": variable isn't array
while executing
"set testpid($num) [get_integer_valueof "pid" -1]"
or
$ runtest gdb.threads/check-libthread-db.exp gdb.multi/multi-kill.exp
...
Running /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.multi/multi-kill.exp ...
Running /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.threads/check-libthread-db.exp ...
ERROR: tcl error sourcing /home/pedro/gdb/binutils-gdb/src/gdb/testsuite/gdb.threads/check-libthread-db.exp.
ERROR: can't set "testpid": variable is array
while executing
"set testpid [spawn_id_get_pid $test_spawn_id]"
("uplevel" body line 8)
Fix this with a namespace, like gdb.linespec/explicit.exp does.
gdb/testsuite/ChangeLog:
2020-05-15 Pedro Alves <palves@redhat.com>
* gdb.multi/multi-kill.exp: Wrap in namespace.
(start_inferior): Add TESTPID parameter. Use it instead of the
testpid global.
(top level): Define empty TESTPID array, and pass it down to
start_inferior.
|
|
Some Intel processors implement a Branch Trace Store (BTS) which GDB
uses for reverse execution support via the "record btrace bts"
command.
I have been unable to find a description of a similar feature in a
recent (April 2020) AMD64 architecture reference:
https://www.amd.com/system/files/TechDocs/40332.pdf
While it is the case that AMD processors have an LBR (last branch
record) bit in the DebugCtl MSR, it seems that it affects only four
MSRs when enabled. The names of these MSRs are LastBranchToIP,
LastBranchFromIP, LastIntToIP, and LastIntFromIP. I can find no
mention of anything more extensive. While looking at an Intel
architecture document, I noticed that Intel's P6 family from the
mid-90s had registers of the same name.
Therefore...
This commit disables "record btrace bts" support in GDB for AMD
processors.
Using the test case from gdb.base/break.exp, the sessions
below show the expected behavior (run on a machine with an
Intel processor) versus that on a machine with an AMD processor.
The AMD processor in question is reported as follows by "lscpu":
AMD Ryzen Threadripper 2950X 16-Core Processor . Finally, I'll
note that the AMD machine is actually a VM, but I see similar
behavior on both the virtualization host and the VM.
Intel machine - Desired behavior:
[kevinb@mohave gdb]$ ./gdb -q testsuite/outputs/gdb.base/break/break
Reading symbols from testsuite/outputs/gdb.base/break/break...
(gdb) start
Temporary breakpoint 1 at 0x401179: file /home/kevinb/sourceware-git/native-build/bld/../../binutils-gdb/gdb/testsuite/gdb.base/break.c, line 43.
Starting program: /home/kevinb/sourceware-git/native-build/bld/gdb/testsuite/outputs/gdb.base/break/break
Temporary breakpoint 1, main (argc=1, argv=0x7fffffffd748, envp=0x7fffffffd758)
at /home/kevinb/sourceware-git/native-build/bld/../../binutils-gdb/gdb/testsuite/gdb.base/break.c:43
43 if (argc == 12345) { /* an unlikely value < 2^16, in case uninited */ /* set breakpoint 6 here */
(gdb) record btrace
(gdb) b factorial
Breakpoint 2 at 0x40121b: file /home/kevinb/sourceware-git/native-build/bld/../../binutils-gdb/gdb/testsuite/gdb.base/break.c, line 63.
(gdb) c
Continuing.
Breakpoint 2, factorial (value=6)
at /home/kevinb/sourceware-git/native-build/bld/../../binutils-gdb/gdb/testsuite/gdb.base/break.c:63
63 if (value > 1) { /* set breakpoint 7 here */
(gdb) info record
Active record target: record-btrace
Recording format: Branch Trace Store.
Buffer size: 64kB.
Recorded 768 instructions in 22 functions (0 gaps) for thread 1 (process 19215).
(gdb) record function-call-history
13 do_lookup_x
14 _dl_lookup_symbol_x
15 _dl_fixup
16 _dl_runtime_resolve_xsavec
17 atoi
18 strtoq
19 ____strtoll_l_internal
20 atoi
21 main
22 factorial
(gdb) record instruction-history
759 0x00007ffff7ce0917 <____strtoll_l_internal+647>: pop %r15
760 0x00007ffff7ce0919 <____strtoll_l_internal+649>: retq
761 0x00007ffff7cdd064 <atoi+20>: add $0x8,%rsp
762 0x00007ffff7cdd068 <atoi+24>: retq
763 0x00000000004011b1 <main+75>: mov %eax,%edi
764 0x00000000004011b3 <main+77>: callq 0x401210 <factorial>
765 0x0000000000401210 <factorial+0>: push %rbp
766 0x0000000000401211 <factorial+1>: mov %rsp,%rbp
767 0x0000000000401214 <factorial+4>: sub $0x10,%rsp
768 0x0000000000401218 <factorial+8>: mov %edi,-0x4(%rbp)
AMD machine - Wrong behavior:
[kev@f32-1 gdb]$ ./gdb -q testsuite/outputs/gdb.base/break/break
Reading symbols from testsuite/outputs/gdb.base/break/break...
(gdb) start
Temporary breakpoint 1 at 0x401179: file /ironwood1/sourceware-git/f32-master/bld/../../worktree-master/gdb/testsuite/gdb.base/break.c, line 43.
Starting program: /mesquite2/sourceware-git/f32-master/bld/gdb/testsuite/outputs/gdb.base/break/break
Temporary breakpoint 1, main (argc=1, argv=0x7fffffffd5b8, envp=0x7fffffffd5c8)
at /ironwood1/sourceware-git/f32-master/bld/../../worktree-master/gdb/testsuite/gdb.base/break.c:43
43 if (argc == 12345) { /* an unlikely value < 2^16, in case uninited */ /* set breakpoint 6 here */
(gdb) record btrace
(gdb) b factorial
Breakpoint 2 at 0x40121b: file /ironwood1/sourceware-git/f32-master/bld/../../worktree-master/gdb/testsuite/gdb.base/break.c, line 63.
(gdb) c
Continuing.
Breakpoint 2, factorial (value=6)
at /ironwood1/sourceware-git/f32-master/bld/../../worktree-master/gdb/testsuite/gdb.base/break.c:63
63 if (value > 1) { /* set breakpoint 7 here */
(gdb) info record
Active record target: record-btrace
Recording format: Branch Trace Store.
Buffer size: 64kB.
warning: Recorded trace may be incomplete at instruction 7737 (pc = 0x405000).
warning: Recorded trace may be incomplete at instruction 7739 (pc = 0x0).
Recorded 7740 instructions in 46 functions (2 gaps) for thread 1 (process 1402911).
(gdb) record function-call-history
37 ??
38 values
39 some_enum_global
40 ??
41 some_union_global
42 some_variable
43 ??
44 [decode error (2): unknown instruction]
45 ??
46 [decode error (2): unknown instruction]
(gdb) record instruction-history
7730 0x0000000000404ff3: add %al,(%rax)
7731 0x0000000000404ff5: add %al,(%rax)
7732 0x0000000000404ff7: add %al,(%rax)
7733 0x0000000000404ff9: add %al,(%rax)
7734 0x0000000000404ffb: add %al,(%rax)
7735 0x0000000000404ffd: add %al,(%rax)
7736 0x0000000000404fff: .byte 0x0
7737 0x0000000000405000: Cannot access memory at address 0x405000
Lastly, I'll note that I see a lot of gdb.btrace failures without
this commit. Worse still, the results aren't always the same which
causes a lot of noise when comparing test results.
gdbsupport/ChangeLog:
* btrace-common.h (btrace_cpu_vendor): Add CV_AMD.
gdb/ChangeLog:
* nat/linux-btrace.c (btrace_this_cpu): Add check for AMD
processors.
(cpu_supports_bts): Add CV_AMD case.
|
|
[Simon: I send this patch on behalf of Laurent Morichetti, I added the
commit message and performance measurement stuff.
Also, this patch is better viewed with "git show -w".]
stop_all_threads, in infrun.c, is used to stop all running threads on
targets that are always non-stop. It's used, for example, when the
program hits a breakpoint while GDB is set to "non-stop off". It sends
a stop request for each running thread, then collects one wait event for
each.
Since new threads can spawn while we are stopping the threads, it's
written in a way where it makes multiple such "send stop requests to
running threads & collect wait events" passes. The function completes
when it has made two passes where it hasn't seen any running threads.
With the way it's written right now is, it iterates on the thread list,
sending a stop request for each running thread. It then waits for a
single event, after which it iterates through the thread list again. It
sends stop requests for any running threads that's been created since
the last iteration. It then consumes another single wait event.
This makes it so we iterate on O(n^2) threads in total, where n is the
number of threads. This patch changes the function to reduce it to
O(n). This starts to have an impact when dealing with multiple
thousands of threads (see numbers below). At each pass, we know the
number of outstanding stop requests we have sent, for which we need to
collect a stop event. We can therefore loop to collect this many stop
events before proceeding to the next pass and iterate on the thread list
again.
To check the performance improvements with this patch, I made an
x86/Linux program with a large number of idle threads (varying from 1000
to 10000). The program's main thread hits a breakpoint once all these
threads have started, which causes stop_all_threads to be called to stop
all these threads. I measured (by patching stop_all_threads):
- the execution time of stop_all_threads
- the total number of threads we iterate on during the complete
execution of the function (the total number of times we execute the
"for (thread_info *t : all_non_exited_threads ())" loop)
These are the execution times, in milliseconds:
# threads before after
1000 226 106
2000 997 919
3000 3461 2323
4000 4330 3570
5000 8642 6600
6000 9918 8039
7000 12662 10930
8000 16652 11222
9000 21561 15875
10000 26613 20019
Note that I very unscientifically executed each case only once.
These are the number of loop executions:
# threads before after
1000 1003002 3003
2000 4006002 6003
3000 9009002 9003
4000 16012002 12003
5000 25015002 15003
6000 36018002 18003
7000 49021002 21003
8000 64024002 24003
9000 81027002 27003
10000 100030002 30003
This last table shows pretty well the O(n^2) vs O(n) behaviors.
Reg-tested on x86 GNU/Linux (Ubuntu 16.04).
gdb/ChangeLog:
YYYY-MM-DD Laurent Morichetti <Laurent.Morichetti@amd.com>
YYYY-MM-DD Simon Marchi <simon.marchi@efficios.com>
* infrun.c (stop_all_threads): Collect multiple wait events at
each pass.
|
|
Remove TYPE_CODE, changing all the call sites to use type::code
directly. This is quite a big diff, but this was mostly done using sed
and coccinelle. A few call sites were done by hand.
gdb/ChangeLog:
* gdbtypes.h (TYPE_CODE): Remove. Change all call sites to use
type::code instead.
|
|
Add the code and set_code methods on code, in order to remove the
TYPE_CODE macro. In this patch, the TYPE_CODE macro is changed to use
type::code, so all the call sites that are used to set the type code are
changed to use type::set_code. The next patch will remove TYPE_CODE
completely.
gdb/ChangeLog:
* gdbtypes.h (struct type) <code, set_code>: New methods.
(TYPE_CODE): Use type::code. Change all call sites used to set
the code to use type::set_code instead.
|
|
When running test-case gdb.fortran/nested-funcs-2.exp with target board
native-gdbserver, we have:
...
(gdb) call contains_keyword::subroutine_to_call()^M
(gdb) FAIL: gdb.fortran/nested-funcs-2.exp: src_prefix=0: nest_prefix=1: \
call contains_keyword::subroutine_to_call()
...
This is caused by the fact that we're trying to match inferior output using
gdb_test.
Fix this by using gdb_test_stdio instead.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-05-14 Tom de Vries <tdevries@suse.de>
* gdb.fortran/nested-funcs-2.exp: Use gdb_test_stdio to test inferior
output.
|
|
With test-case gdb.base/align.exp and target board native-gdbserver, we run
into:
...
(gdb) file outputs/gdb.base/align/c/align^M
Reading symbols from outputs/gdb.base/align/c/align...^M
(gdb) delete breakpoints^M
(gdb) info breakpoints^M
No breakpoints or watchpoints.^M
(gdb) break main^M
Breakpoint 1 at 0x4004ab: file outputs/gdb.base/align/c/align.c, line 838.^M
(gdb) kill^M
The program is not being run.^M
(gdb) spawn gdbserver --once localhost:2592 outputs/gdb.base/align/align^M
Process outputs/gdb.base/align/align created; pid = 6946^M
Listening on port 2592^M
target remote localhost:2592^M
Remote debugging using localhost:2592^M
warning: Mismatch between current exec-file outputs/gdb.base/align/c/align^M
and automatically determined exec-file outputs/gdb.base/align/align^M
exec-file-mismatch handling is currently "ask"^M
Load new symbol table from "outputs/gdb.base/align/align"? (y or n) Quit^M
(gdb) ERROR: test suppressed
...
Fix this by turning this and similar test-cases into regular, single
executable test-cases.
This fixes 100+ FAILs with target board native-gdbserver.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-05-14 Tom de Vries <tdevries@suse.de>
* gdb.base/align.exp: Split into ...
* gdb.base/align.exp.in: ...
* gdb.base/align-c++.exp: ...
* gdb.base/align-c.exp: ... these.
* gdb.base/infcall-nested-structs.exp: Split into ...
* gdb.base/infcall-nested-structs.exp.in: ...
* gdb.base/infcall-nested-structs-c++.exp: ...
* gdb.base/infcall-nested-structs-c.exp: ... these.
* gdb.base/info-types.exp: Split into ...
* gdb.base/info-types.exp.in: ...
* gdb.base/info-types-c++.exp: ...
* gdb.base/info-types-c.exp: ... these.
* gdb.base/max-depth.exp: Split into ...
* gdb.base/max-depth.exp.in: ...
* gdb.base/max-depth-c++.exp: ...
* gdb.base/max-depth-c.exp: ... these.
* gdb.cp/infcall-nodebug.exp: Split into ...
* gdb.cp/infcall-nodebug.exp.in: ...
* gdb.cp/infcall-nodebug-c++-d0.exp: ...
* gdb.cp/infcall-nodebug-c++-d1.exp: ...
* gdb.cp/infcall-nodebug-c-d0.exp: ...
* gdb.cp/infcall-nodebug-c-d1.exp: ... these.
|
|
In stop_all_threads, GDB sends signals to other threads in an attempt
to stop them. While in a typical scenario the expected wait status is
TARGET_WAITKIND_STOPPED, it is possible that the thread GDB attempted
to stop has already terminated. If so, a waitstatus other than
TARGET_WAITKIND_STOPPED would be received. Handle this case
appropriately.
If a wait status that denotes thread termination is ignored, GDB goes
into an infinite loop in stop_all_threads.
E.g.:
$ gdb ./a.out
(gdb) start
...
(gdb) add-inferior -exec ./a.out
...
(gdb) inferior 2
...
(gdb) start
...
(gdb) set schedule-multiple on
(gdb) set debug infrun 2
(gdb) continue
Continuing.
infrun: clear_proceed_status_thread (process 10449)
infrun: clear_proceed_status_thread (process 10453)
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming process 10449
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 10449] at 0x55555555514e
infrun: infrun_async(1)
infrun: prepare_to_wait
infrun: proceed: resuming process 10453
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 10453] at 0x55555555514e
infrun: prepare_to_wait
infrun: Found 2 inferiors, starting at #0
infrun: target_wait (-1.0.0, status) =
infrun: 10449.10449.0 [process 10449],
infrun: status->kind = exited, status = 0
infrun: handle_inferior_event status->kind = exited, status = 0
[Inferior 1 (process 10449) exited normally]
infrun: stop_waiting
infrun: stop_all_threads
infrun: stop_all_threads, pass=0, iterations=0
infrun: process 10453 executing, need stop
infrun: target_wait (-1.0.0, status) =
infrun: 10453.10453.0 [process 10453],
infrun: status->kind = exited, status = 0
infrun: stop_all_threads status->kind = exited, status = 0 process 10453
infrun: process 10453 executing, already stopping
infrun: target_wait (-1.0.0, status) =
infrun: -1.0.0 [process -1],
infrun: status->kind = no-resumed
infrun: infrun_async(0)
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
infrun: stop_all_threads status->kind = no-resumed process -1
infrun: process 10453 executing, already stopping
...
And this polling goes on forever. This patch prevents the infinite
looping behavior. For the same scenario above, we obtain the
following behavior:
...
(gdb) continue
Continuing.
infrun: clear_proceed_status_thread (process 31229)
infrun: clear_proceed_status_thread (process 31233)
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming process 31229
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 31229] at 0x55555555514e
infrun: infrun_async(1)
infrun: prepare_to_wait
infrun: proceed: resuming process 31233
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [process 31233] at 0x55555555514e
infrun: prepare_to_wait
infrun: Found 2 inferiors, starting at #0
infrun: target_wait (-1.0.0, status) =
infrun: 31229.31229.0 [process 31229],
infrun: status->kind = exited, status = 0
infrun: handle_inferior_event status->kind = exited, status = 0
[Inferior 1 (process 31229) exited normally]
infrun: stop_waiting
infrun: stop_all_threads
infrun: stop_all_threads, pass=0, iterations=0
infrun: process 31233 executing, need stop
infrun: target_wait (-1.0.0, status) =
infrun: 31233.31233.0 [process 31233],
infrun: status->kind = exited, status = 0
infrun: stop_all_threads status->kind = exited, status = 0 process 31233
infrun: saving status status->kind = exited, status = 0 for 31233.31233.0
infrun: process 31233 not executing
infrun: stop_all_threads, pass=1, iterations=1
infrun: process 31233 not executing
infrun: stop_all_threads done
(gdb)
The exit event from Inferior 1 is received and shown to the user.
The exit event from Inferior 2 is not displayed, but kept pending.
(gdb) info inferiors
Num Description Connection Executable
* 1 <null> a.out
2 process 31233 1 (native) a.out
(gdb) inferior 2
[Switching to inferior 2 [process 31233] (a.out)]
[Switching to thread 2.1 (process 31233)]
Couldn't get registers: No such process.
(gdb) continue
Continuing.
infrun: clear_proceed_status_thread (process 31233)
infrun: clear_proceed_status_thread: thread process 31233 has pending wait status status->kind = exited, status = 0 (currently_stepping=0).
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming process 31233
infrun: resume: thread process 31233 has pending wait status status->kind = exited, status = 0 (currently_stepping=0).
infrun: prepare_to_wait
infrun: Using pending wait status status->kind = exited, status = 0 for process 31233.
infrun: target_wait (-1.0.0, status) =
infrun: 31233.31233.0 [process 31233],
infrun: status->kind = exited, status = 0
infrun: handle_inferior_event status->kind = exited, status = 0
[Inferior 2 (process 31233) exited normally]
infrun: stop_waiting
(gdb) info inferiors
Num Description Connection Executable
1 <null> a.out
* 2 <null> a.out
(gdb)
When a process exits and we leave the process exit event pending, we
need to make sure that at least one thread is left listed in the
inferior's thread list. This is necessary in order to make sure we
have a thread that we can later resume, so the process exit event can
be collected/reported.
When native debugging, the GNU/Linux back end already makes sure that
the last LWP isn't deleted.
When remote debugging against GNU/Linux GDBserver, the GNU/Linux
GDBserver backend also makes sure that the last thread isn't deleted
until the process exit event is reported to GDBserver core.
However, between the backend reporting the process exit event to
GDBserver core, and GDB consuming the event, GDB may update the thread
list and find no thread left in the process. The process exit event
will be pending somewhere in GDBserver's stop reply queue, or
gdb/remote.c's queue, or whathever other event queue inbetween
GDBserver and infrun.c's handle_inferior_event.
This patch tweaks remote.c's target_update_thread_list implementation
to avoid deleting the last thread of an inferior.
In the past, this case of inferior-with-no-threads led to a special
case at the bottom of handle_no_resumed, where it reads:
/* Note however that we may find no resumed thread because the whole
process exited meanwhile (thus updating the thread list results
in an empty thread list). In this case we know we'll be getting
a process exit event shortly. */
for (inferior *inf : all_non_exited_inferiors (ecs->target))
In current master, that code path is still reachable with the
gdb.threads/continue-pending-after-query.exp testcase, when tested
against GDBserver, with "maint set target-non-stop" forced "on".
With this patch, the scenario that loop was concerned about is still
properly handled, because the loop above it finds the process's last
thread with "executing" set to true, and thus the handle_no_resumed
function still returns true.
Since GNU/Linux native and remote are the only targets that support
non-stop mode, and with this patch, we always make sure the inferior
has at least one thread, this patch also removes that "inferior with
no threads" special case handling from handle_no_resumed.
Since remote.c now has a special case where we treat a thread that has
already exited as if it was still alive, we might need to tweak
remote.c's target_thread_alive implementation to return true for that
thread without querying the remote side (which would say "no, not
alive"). After inspecting all the target_thread_alive calls in the
codebase, it seems that only the one from prune_threads could result
in that thread being accidentally deleted. There's only one call to
prune_threads in GDB's common code, so this patch handles this by
replacing the prune_threads call with a delete_exited_threads call.
This seems like an improvement anyway, because we'll still be doing
what the comment suggests we want to do, and, we avoid remote protocol
traffic.
Regression-tested on X86_64 Linux.
gdb/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Tom de Vries <tdevries@suse.de>
Pedro Alves <palves@redhat.com>
PR threads/25478
* infrun.c (stop_all_threads): Do NOT ignore
TARGET_WAITKIND_NO_RESUMED, TARGET_WAITKIND_THREAD_EXITED,
TARGET_WAITKIND_EXITED, TARGET_WAITKIND_SIGNALLED wait statuses
received.
(handle_no_resumed): Remove code handling a live inferior with no
threads.
* remote.c (has_single_non_exited_thread): New.
(remote_target::update_thread_list): Do not delete a thread if is
the last thread of the process.
* thread.c (thread_select): Call delete_exited_threads instead of
prune_threads.
gdb/testsuite/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Pedro Alves <palves@redhat.com>
* gdb.multi/multi-exit.c: New file.
* gdb.multi/multi-exit.exp: New file.
* gdb.multi/multi-kill.c: New file.
* gdb.multi/multi-kill.exp: New file.
|
|
In stop_all_threads, the thread events of the current top target are
enabled at the beginning of the function and then disabled at the end
(at scope exit time). Because there may be multiple targets whose
thread lists will be updated and whose threads are stopped,
enable/disable thread events for all targets.
This update caused a change in the annotations. In particular, a
"frames-invalid" annotation is printed one more time due to switching
the current inferior. Hence, gdb.base/annota1.exp and
gdb.cp/annota2.exp tests are also updated.
Regression-tested on X86_64 Linux using the default board file and the
native-extended-gdbserver board file.
gdb/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* infrun.c (stop_all_threads): Enable/disable thread events of all
targets. Move a debug message denoting the end of the function
into the SCOPED_EXIT block.
gdb/testsuite/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.base/annota1.exp: Update the expected output.
* gdb.cp/annota2.exp: Ditto.
|
|
Introduce two new convenience functions:
1. all_non_exited_process_targets: returns a collection of all process
stratum targets that have non-exited inferiors on them. Useful for
iterating targets.
2. switch_to_target_no_thread: switch the context to the first
inferior of the given target, and to no selected thread.
gdb/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* process-stratum-target.h: Include <set>.
(all_non_exited_process_targets, switch_to_target_no_thread): New
function declarations.
* process-stratum-target.c (all_non_exited_process_targets)
(switch_to_target_no_thread): New function implementations.
|
|
This is a refactoring. The extracted function is placed deliberately
before 'stop_all_threads' because the function will be re-used there
in a subsequent patch for handling an exit status kind received from
a thread that GDB attempted to stop.
gdb/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* infrun.c (handle_inferior_event): Extract out a piece of code
into...
(mark_non_executing_threads): ...this new function.
Change-Id: I2b088f4a724f4260cb37068264964525cf62a118
|
|
In infrun.c's resume_1 function, move the definition of the local
variable PC down to its first use. This is useful if the thread we want
to resume is already gone with a pending exit event, because we avoid
the error we would see otherwise when trying to read the PC.
gdb/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* infrun.c (resume_1): Move a 'regcache_read_pc' call down to first
use.
|
|
It possible that a thread whose PC we attempt to read is already dead.
In this case, 'regcache_read_pc' errors out. This impacts the
"proceed" execution flow, where GDB quits early before having a chance
to check if there exists a pending event. To remedy, keep going with
a 0 value for the PC if 'regcache_read_pc' fails. Because the value
of PC before resuming a thread is mostly used for storing and checking
the next time the thread stops, this tolerance is expected to be
harmless for a dead thread/process.
gdb/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* regcache.c (regcache_read_pc_protected): New function
implementation that returns 0 if the PC cannot read via
'regcache_read_pc'.
* infrun.c (proceed): Call 'regcache_read_pc_protected'
instead of 'regcache_read_pc'.
(keep_going_pass_signal): Ditto.
gdbsupport/ChangeLog:
2020-05-14 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* common-regcache.h (regcache_read_pc_protected): New function
declaration.
|
|
I recently noticed the align_value function in ada-lang.c. This can
be removed, in favor of align_up from gdbsupport.
gdb/ChangeLog
2020-05-13 Tom Tromey <tromey@adacore.com>
* ada-lang.c (align_value): Remove.
(ada_template_to_fixed_record_type_1): Use align_up.
|
|
The async-event.[ch] files were introduced recently as a result of
splitting the event-loop. I believe the copyright year update was
just an oversight. So, this patch fixes that.
gdb/ChangeLog:
2020-05-13 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* async-event.c: Update the copyright year.
* async-event.h: Update the copyright year.
|
|
This commit disables the recently added checking for paths in test
names, and for duplicate test names, when the gdb tests are run in
parallel.
When running the gdb tests in parallel the extra result count lines
produced cause the dg-extract-results scripts to exit with an error.
The patches for the dg-extract-results scripts have been posted to the
gcc-patches mailing list here:
https://gcc.gnu.org/pipermail/gcc-patches/2020-May/545562.html
Once they are merged there then these changes can be merged over to
binutils-gdb, and this commit can be reverted.
gdb/testsuite/ChangeLog:
* lib/check-test-names.exp: Disable when testing is being run in
parallel.
|
|
gdb/ChangeLog:
* objfiles.h (is_addr_in_objfile,
shared_objfile_contains_address_p): Return bool.
* objfile.c (is_addr_in_objfile,
shared_objfile_contains_address_p): Return bool.
|
|
When running test-case gdb.base/jit-elf.exp with target board
cc-with-gdb-index, we get:
...
spawn -ignore SIGHUP gdb/contrib/cc-with-tweaks.sh -i gcc \
-fno-stack-protector src/gdb/testsuite/gdb.base/jit-elf-main.c \
-fdiagnostics-color=never -DATTACH=1 -DLOAD_ADDRESS=0x7000000 \
-DLOAD_INCREMENT=0x1000000 -g -lm \
-o outputs/gdb.base/jit-elf/jit-elf-main"-attach"^M
outputs/gdb.base/jit-elf/.tmp/jit-elf-main-attach: \
No such file or directory.^M
output is:
outputs/gdb.base/jit-elf/.tmp/jit-elf-main-attach: \
No such file or directory.^M
gdb compile failed, outputs/gdb.base/jit-elf/.tmp/jit-elf-main-attach: \
No such file or directory.
UNTESTED: gdb.base/jit-elf.exp: failed to compile jit-elf-main"-attach"
...
The problem is a string concat in jit-elf.exp:
...
${main_binfile}"-attach"
...
which is intended to generate string 'jit-elf-main-attach' but instead
generates string 'jit-elf-main"-attach"'.
Fix this by using "${main_binfile}-attach" instead.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-05-12 Tom de Vries <tdevries@suse.de>
* gdb.base/jit-elf.exp: Fix string concat.
|
|
When running test-case jit-elf.exp with target board cc-with-gdb-index, I run
into:
...
gdb compile failed, outputs/gdb.base/jit-elf/.tmp/jit-elf-main-attach: \
No such file or directory.
ERROR: tcl error sourcing src/gdb/testsuite/gdb.base/jit-elf.exp.
ERROR: can't read "main_basename": no such variable
while executing
"untested "failed to compile ${main_basename}.c""
(procedure "compile_jit_main" line 7)
...
The problem is in compile_jit_main in lib/jit-elf-helpers.exp, where we try to
emit an untested message using global variable main_basename.c.
Fixing this by declaring the variable global results in duplicate test-names,
because the same source file is compiled more than once.
Instead, fix this by using the result name in the untested message.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-05-12 Tom de Vries <tdevries@suse.de>
* lib/jit-elf-helpers.exp: Don't use undefined variables in untested
messages.
|
|
In gdb.multi we have:
...
DUPLICATE: gdb.multi/multi-term-settings.exp: \
inf1_how=run: inf2_how=run: info inferiors
DUPLICATE: gdb.multi/multi-term-settings.exp: \
inf1_how=run: inf2_how=attach: info inferiors
DUPLICATE: gdb.multi/multi-term-settings.exp: \
inf1_how=run: inf2_how=tty: info inferiors
DUPLICATE: gdb.multi/multi-term-settings.exp: \
inf1_how=attach: inf2_how=run: info inferiors
DUPLICATE: gdb.multi/multi-term-settings.exp: \
inf1_how=attach: inf2_how=attach: attach
DUPLICATE: gdb.multi/multi-term-settings.exp: \
inf1_how=attach: inf2_how=attach: info inferiors
DUPLICATE: gdb.multi/multi-term-settings.exp: \
inf1_how=attach: inf2_how=tty: info inferiors
DUPLICATE: gdb.multi/multi-term-settings.exp: \
inf1_how=tty: inf2_how=run: info inferiors
DUPLICATE: gdb.multi/multi-term-settings.exp: \
inf1_how=tty: inf2_how=attach: info inferiors
DUPLICATE: gdb.multi/multi-term-settings.exp: \
inf1_how=tty: inf2_how=tty: tty TTY
DUPLICATE: gdb.multi/multi-term-settings.exp: \
inf1_how=tty: inf2_how=tty: info inferiors
...
Fix these using with_test_prefix.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-05-12 Tom de Vries <tdevries@suse.de>
* gdb.multi/multi-term-settings.exp: Use with_test_prefix.
|
|
In gdb.ada we have these duplicate test-names:
...
DUPLICATE: gdb.ada/catch_ex.exp: continuing to program completion
DUPLICATE: gdb.ada/mi_catch_ex.exp: breakpoint at main
DUPLICATE: gdb.ada/mi_catch_ex.exp: mi runto main
DUPLICATE: gdb.ada/mi_catch_ex_hand.exp: breakpoint at main
DUPLICATE: gdb.ada/mi_catch_ex_hand.exp: mi runto main
...
Fix these using with_test_prefix.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-05-12 Tom de Vries <tdevries@suse.de>
* gdb.ada/catch_ex.exp: Use with_test_prefix.
* gdb.ada/mi_catch_ex.exp: Same.
* gdb.ada/mi_catch_ex_hand.exp: Same.
|
|
In gdb.fortran we have:
...
DUPLICATE: gdb.fortran/complex.exp: whatis $
DUPLICATE: gdb.fortran/complex.exp: whatis $
DUPLICATE: gdb.fortran/complex.exp: whatis $
DUPLICATE: gdb.fortran/complex.exp: whatis $
...
Fix this by using with_test_prefix.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-05-12 Tom de Vries <tdevries@suse.de>
* gdb.fortran/complex.exp: Use with_test_prefix.
|
|
In gdb.trace we have these duplicates:
...
DUPLICATE: gdb.trace/passcount.exp: 4.20a: set all three passcounts to three
DUPLICATE: gdb.trace/passcount.exp: 4.6: set passcount to zero
DUPLICATE: gdb.trace/passcount.exp: 4.7: set passcount to large number (32767)
...
Fix these by fixing the test-names.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-05-12 Tom de Vries <tdevries@suse.de>
* gdb.trace/passcount.exp: Fix test-names.
|
|
In gdb.pascal we have these duplicates:
...
DUPLICATE: gdb.pascal/gdb11492.exp: next
DUPLICATE: gdb.pascal/gdb11492.exp: print char_array
...
Fix these by using with_test_prefix.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-05-12 Tom de Vries <tdevries@suse.de>
* gdb.pascal/gdb11492.exp: Use with_test_prefix.
|
|
There are 3 test directories with one duplicate test-name: gdb.gdb, gdb.opt
and gdb.xml. The duplicates are:
...
DUPLICATE: gdb.gdb/complaints.exp: call complaint_internal ($cstr)
DUPLICATE: gdb.opt/inline-locals.exp: info locals above bar 2 \
(PRMS: gdb/25695)
DUPLICATE: gdb.xml/tdesc-regs.exp: ptype $extrareg
...
Fix as appropriate.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-05-12 Tom de Vries <tdevries@suse.de>
* gdb.gdb/complaints.exp: Use with_test_prefix.
* gdb.xml/tdesc-regs.exp: Same.
* gdb.opt/inline-locals.exp: Fix test name.
|
|
Splits ELF related symbols into a separate jit-elf-util.h header and
enhances it with a few more.
Intention is to make adding new JIT tests possible without repeating
most of the common boilerplate.
As a test enhancement, jit-elf-main.c now calls the renamed function
after registering the jit object and ensures it returns an expected
result.
gdb/testsuite/ChangeLog:
2020-02-18 Mihails Strasuns <mihails.strasuns@intel.com>
* gdb.base/jit-elf-util.h: New header file.
* gdb.base/jit-elf-main.c: Use jit-elf-util.h, add a call to
the renamed JIT function to verify its result.
|
|
Replaces previous approach with patching resulting ELF binary after
loading - now that each test iteration works on a separately compiled
binary it is not necessary anymore.
Tests are still being ran without debug info to preserve original test
functionality but this change opens up the possibility to enable debug
info if needed too.
gdb/testsuite/ChangeLog:
2020-03-27 Mihails Strasuns <mihails.strasuns@intel.com>
* lib/jit-elf-helpers.exp: Supply -DFUNCTION_NAME macro
definition when compiling jit-elf-solib.co.
* gdb.base/jit-elf-main.c: Stop patching jit function name.
* gdb.base/jit-elf-solib.c: Use FUNCTION_NAME macro value as a
function name.
|
|
Removes the need to manually relocate loaded ELF binary by using a fixed
constant as both mmap base address and as a requested first segment
address supplied to the linker.
In future will enable JIT tests with a valid DWARF debug info. Current
tests still need to compile without a debug info though, because they do
a function name modification.
gdb/testsuite/ChangeLog:
2020-02-18 Mihails Strasuns <mihails.strasuns@intel.com>
* lib/jit-elf-helpers.exp: Supply -Ttext-segment linker flag and
define LOAD_ADDRESS/LOAD_INCREMENT macros for the compiled binaries.
* gdb.base/jit-elf-main.c: Use LOAD_ADDRESS/LOAD_INCREMENT to
calculate the mmap address.
|
|
New utility library to be used by jit-elf tests responsible for
compiling binary artifacts. In the next commit the compilation process
will become more complicated because of extra mandatory flag - keeping
it in one place will make tests less fragile.
gdb/testsuite/ChangeLog:
2020-02-18 Mihails Strasuns <mihails.strasuns@intel.com>
* lib/jit-elf-helpers.exp: New file.
* gdb.base/jit-elf.exp: Updated to use jit-elf-helpers.exp.
* gdb.base/jit-elf-so.exp: Updated to use jit-elf-helpers.exp.
|
|
Old usage: jit-elf-main lib.so 2
New usage: jit-elf-main lib.so.1 lib.so.2
Refactoring necessary to support running tests over multiple jit
binaries rather than mapping the same binary muultiple times.
gdb/testsuite/ChangeLog:
2020-02-18 Mihails Strasuns <mihails.strasuns@intel.com>
* gdb.base/jit-elf-main.c: Read lib list from argc/argv.
* gdb.base/jit-elf.exp: Compile N jit libraries and use the list.
* gdb.base/jit-elf-so.exp: Ditto.
|
|
We currently have these duplicate test-names in gdb.dwarf2:
...
$ grep ^DUPLICATE: gdb.sum
DUPLICATE: gdb.dwarf2/comp-unit-lang.exp: show language
DUPLICATE: gdb.dwarf2/data-loc.exp: get integer valueof "sizeof (int)"
DUPLICATE: gdb.dwarf2/data-loc.exp: get integer valueof "sizeof (void *)"
DUPLICATE: gdb.dwarf2/data-loc.exp: get integer valueof "sizeof (int)"
DUPLICATE: gdb.dwarf2/data-loc.exp: get integer valueof "sizeof (int)"
DUPLICATE: gdb.dwarf2/data-loc.exp: ptype foo.array_type
DUPLICATE: gdb.dwarf2/varval.exp: get integer valueof "sizeof (int)"
DUPLICATE: gdb.dwarf2/varval.exp: get integer valueof "sizeof (void *)"
DUPLICATE: gdb.dwarf2/implref-struct.exp: print-object=off: \
set print object off
DUPLICATE: gdb.dwarf2/implref-struct.exp: print-object=on: \
set print object on
DUPLICATE: gdb.dwarf2/dw2-bad-parameter-type.exp: ptype f
...
Fix as appropriate.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-05-12 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/comp-unit-lang.exp: Use with_test_prefix.
* gdb.dwarf2/dw2-bad-parameter-type.exp: Same.
* gdb.dwarf2/implref-struct.exp: Same.
* gdb.dwarf2/varval.exp: Ensure get_sizeof is called once per type.
* gdb.dwarf2/data-loc.exp: Same. Remove duplicate test.
|
|
When running gdb.base/jit-so.exp, we see duplicate test names:
$ grep PASS testsuite/gdb.sum | sort | uniq -c | sort -n
...
2 PASS: gdb.base/jit-so.exp: one_jit_test-1: info function jit_function
2 PASS: gdb.base/jit-so.exp: one_jit_test-2: info function jit_function
Give an explicit name to one test to avoid this.
gdb/testsuite/ChangeLog:
* gdb.base/jit-so.exp (one_jit_test): Change test name.
|
|
As discussed on gdb-patches, this restores info_command and the
breakpoint on info_command in gdb-gdb.gdb. This reverts a tiny part
of 0743fc83c03 ("Replace most calls to help_list and cmd_show_list"),
as well as 652fc23a30a ("Remove gdb-gdb.gdb breakpoint on disappeared
function info_command.").
gdb/ChangeLog
2020-05-11 Tom Tromey <tromey@adacore.com>
* cli/cli-cmds.c (info_command): Restore.
(_initialize_cli_cmds): Use add_prefix_command for "info".
* gdb-gdb.gdb.in: Restore breakpoint on info_command.
|
|
Building on the previous commit, this patch detects when two tests
have the same test name and causes Dejagnu to print a new result type
'# of duplicate test names' in the result summary. A line starting
with 'DUPLICATE: ' is also added to the gdb.sum and gdb.log files.
The DUPLICATE markers will be printed the second time a duplicate test
name is seen, and every time after that. So you might see:
PASS: gdb.base/sometest.exp: foo
PASS: gdb.base/sometest.exp: bar
PASS: gdb.base/sometest.exp: foo
DUPLICATE: gdb.base/sometest.exp: foo
PASS: gdb.base/sometest.exp: baz
PASS: gdb.base/sometest.exp: foo
DUPLICATE: gdb.base/sometest.exp: foo
However, the results will report a duplicate count of 1, indicating
that just one test name (foo) was duplicated.
Currently if the tests are run in parallel mode the new result type is
not merged into the combined summary file so users will need to run in
non-parallel mode to check this result. Similarly, the 'DUPLICATE: '
markers will not be merged into the final gdb.sum file. A later
commit will fix this.
gdb/testsuite/ChangeLog:
* lib/check-test-names.exp (all_test_names): New module variable.
(counts): Add 'duplicates' field.
(_check_duplicates): New procedure.
(check): Also check for duplicates.
(do_log_summary): Print duplicates count.
(do_reset_vars): Reset counter for duplicate test names, and
discard all know test names.
|
|
A new library is introduced that hooks into the core of Dejagnu and
detects when a test's name includes either the source or build paths.
If any offending test names are detected then Dejagnu will print a
new result type, '# of paths in test names'. Users should treat this
result type just like other bad results types, and aim not to increase
this number.
As well as displaying the total number of offending tests as part of
the final results, a new marker is included in both the gdb.log and
gdb.sum files, this marker starts with 'PATH: ', so an offending test
would be expected to appear like this:
PASS: gdb.base/sometest.exp: Loaded /path/to/build/testsuite/foo.exe
PATH: gdb.base/sometest.exp: Loaded /path/to/build/testsuite/foo.exe
This should make it easier to track down offending tests.
Currently for a local run on my machine, I don't see any offending
test names, but it is possible that different targets, or different
configurations, might currently be breaking the no paths rule.
In order to get this working I have needed to wrap two core Dejagnu
functions, log_summary, and reset_vars. Relying on core functions
that are not part of any API is always going to be risky, given the
relatively slow rate of Dejagnu change this is probably OK for now,
and we can possibly upstream some changes to Dejagnu that would allow
this functionality to be supported in a more official way later on.
Currently if the tests are run in parallel mode the new result type is
not merged into the combined summary file so users will need to run in
non-parallel mode to check this result. Similarly, the 'PATH: '
markers will not be merged into the combined summary file. A later
commit will fix this.
gdb/testsuite/ChangeLog:
* lib/gdb.exp: Include check-test-names.exp library.
* lib/check-test-names.exp: New file.
|
|
The val_print removal patches introduced an Ada regression on PPC64
(probably any big-endian system).
The issue comes because value_field does not understand that Ada
wrapper fields can be bitfields that wrap a non-scalar type. In this
case the value is already left-justified, so the justification done
there does the wrong thing.
Perhaps it would be good, eventually, to change value_field to
understand this case. In the meantime this implements an Ada-specific
solution.
gdb/ChangeLog
2020-05-11 Tom Tromey <tromey@adacore.com>
* ada-lang.c (ada_value_primitive_field): Now public.
* ada-lang.h (ada_value_primitive_field): Declare.
* ada-valprint.c (print_field_values): Use
ada_value_primitive_field for wrapper fields.
|
|
Test-case gdb.ada/packed_tagged.exp contains a kfail:
...
setup_kfail "gnat compiler bug" *-*-*
...
Kfails are used to indicate problems in gdb, xfails are used to indicate
problems in the environment.
A bug in the gnat compiler is a problem in the environment rather than gdb.
Fix this by changing the kfail into an xfail.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-05-11 Tom de Vries <tdevries@suse.de>
* gdb.ada/packed_tagged.exp: Change kfail into xfail.
|
|
... introduced by my last commit:
-gdb_test "print s'last" " = 3"
+ gdb_test "print s'last" " = 3Z
gdb/testsuite/ChangeLog
2020-05-11 Keith Seitz <keiths@redhat.com>
* gdb.ada/attr_ref_and_charlit.exp: Fix typo.
|
|
When running tests using RUNTESTFLAGS="cpexprs.exp cpexprs-debug-types.exp",
we have:
...
Running src/gdb/testsuite/gdb.cp/cpexprs-debug-types.exp ...
Running src/gdb/testsuite/gdb.cp/cpexprs.exp ...
...
In the first test-case, we have -fdebug-types-section as expected:
...
Running src/gdb/testsuite/gdb.cp/cpexprs-debug-types.exp ...
g++ -fno-stack-protector -fdiagnostics-color=never \
-fdebug-types-section \
-c -g \
-o outputs/gdb.cp/cpexprs-debug-types/cpexprs-debug-types0.o \
src/gdb/testsuite/gdb.cp/cpexprs.cc
...
but in the second test-case, we have also have -fdebug-types-section:
...
Running src/gdb/testsuite/gdb.cp/cpexprs.exp ...
g++ -fno-stack-protector -fdiagnostics-color=never \
-fdebug-types-section \
-c -g -g \
-o outputs/gdb.cp/cpexprs/cpexprs0.o \
src/gdb/testsuite/gdb.cp/cpexprs.cc
...
This is due to using a global variable flags, which is set in
cpexprs-debug-types.exp and tested for existence in cpexprs.exp.
Fix this by using a more robust inclusion mechanism, that is:
- move the bulk of the test-case cpexprs.exp to cpexprs.exp.in,
- include it from cpexprs.exp and cpexprs-debug-types.exp, and
- set flags in both .exp files
gdb/testsuite/ChangeLog:
2020-05-11 Tom de Vries <tdevries@suse.de>
* gdb.cp/cpexprs.exp: Move everything except flags setting ...
* gdb.cp/cpexprs.exp.in: .. here.
* gdb.cp/cpexprs-debug-types.exp: Include cpexprs.exp.in instead of
cpexprs.exp.
|
|
This patch fixes all duplicate and tail parentheses test names.
These can really hinder automated test analysis such as used by
the buildbot.
Before:
$ cat testsuite/gdb.sum | egrep "^(PASS|FAIL|XPASS|XFAIL|KPASS|KFAIL)" \
| sort | uniq -c | sort -n | grep -v " 1 "
2 PASS: gdb.ada/attr_ref_and_charlit.exp: print s'last
2 PASS: gdb.ada/bp_on_var.exp: set breakpoint pending off
2 PASS: gdb.ada/complete.exp: complete p pck.inne
2 PASS: gdb.ada/fun_overload_menu.exp: multiple matches for f (f (1, null))
2 PASS: gdb.ada/type_coercion.exp: p q
2 PASS: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_P_Object.Ptr when no longer null
3 PASS: gdb.ada/fun_overload_menu.exp: 1
After:
<empty>
For parentheses, I've audited all occurrences of trailing parentheses.
Most offenders are of the form:
gdb_test "p func (..)" $expected_result
I've either added a unique test name or simply removed the whitespace
between the function name and the argument list.
gdb/testsuite/ChangeLog
2020-05-11 Keith Seitz <keiths@redhat.com>
* gdb.ada/arrayparam.exp: Resolve duplicate and tail parentheses
test names.
* gdb.ada/arrayptr.exp: Likewise.
* gdb.ada/assign_arr.exp: Likewise.
* gdb.ada/attr_ref_and_charlit.exp: Likewise.
* gdb.ada/bp_on_var.exp: Likewise.
* gdb.ada/call_pn.exp: Likewise.
* gdb.ada/complete.exp: Likewise.
* gdb.ada/fun_overload_menu.exp: Likewise.
* gdb.ada/funcall_param.exp: Likewise.
* gdb.ada/funcall_ref.exp: Likewise.
* gdb.ada/packed_array_assign.exp: Likewise.
* gdb.ada/same_component_name.exp: Likewise.
* gdb.ada/type_coercion.exp: Likewise.
* gdb.ada/unc_arr_ptr_in_var_rec.exp: Likewise.
* gdb.ada/variant_record_packed_array.exp: Likewise.
|
|
When running test-case gdb.fortran/info-modules.exp with target board
debug-names, I run into:
...
FAIL: gdb.fortran/info-modules.exp: info modules: check for entry \
'info-types-2.f90', '18', 'mod2'
...
In more detail, comparing the behaviour of the executable without and with
.debug_names section, we have:
...
-$ gdb -batch info-modules -ex "info modules"
+$ gdb -batch info-modules.debugnames -ex "info modules"
All defined modules:
-File /data/gdb_versions/devel/src/gdb/testsuite/gdb.fortran/info-types-2.f90:
-18: mod2
-
File /data/gdb_versions/devel/src/gdb/testsuite/gdb.fortran/info-types.f90:
16: mod1
...
This is due to the fact that the .debug_names section does not contain
DW_TAG_module entries.
Fix this in debug_names::psymbol_tag.
Build and tested on x86_64-linux with target board debug-names.
gdb/ChangeLog:
2020-05-11 Tom de Vries <tdevries@suse.de>
* dwarf2/index-write.c (debug_names::psymbol_tag): Handle
MODULE_DOMAIN.
|
