| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A while back I typed "info pretty-printers" with a large number of
printers installed, and I typed "q" to stop the pagination. I noticed
that gdb printed a Python exception in this case.
It seems to me that, instead, quitting pagination (or control-c'ing a
Python command generally) should be handled the same way that gdb
normally handles a quit.
This patch implements this idea by changing gdbpy_handle_exception to
treat PyExc_KeyboardInterrupt specially.
gdb/ChangeLog
2018-12-27 Tom Tromey <tom@tromey.com>
* python/py-utils.c (gdbpy_handle_exception): Translate
PyExc_KeyboardInterrupt to quit.
gdb/testsuite/ChangeLog
2018-12-27 Tom Tromey <tom@tromey.com>
* gdb.python/py-cmd.exp (test_python_inline_or_multiline): Add
pagination test.
|
|
Since commit
56bcdbea2bed ("Let gdb.execute handle multi-line commands")
command repetition after using the `gdb.execute` Python function
fails (the previous command is not repeated anymore). This happens
because read_command_lines_1 sets dont_repeat, but the call to
prevent_dont_repeat in execute_gdb_command is later.
The fix is to move the call to prevent_dont_repeat to the beginning of
the function.
Tested on my laptop (ArchLinux-x86_64).
gdb/ChangeLog:
PR python/23714
* gdb/python/python.c (execute_gdb_command): Call
prevent_dont_repeat earlier to avoid affecting dont_repeat.
gdb/testuite/ChangeLog:
PR python/23714
* gdb.python/python.exp: Test command repetition after
gdb.execute.
|
|
The test loop in test_python_inline_or_multiline was not checking for the
gdb prompt. readline_is_used then reads in the prompt causing it to fail
and the final chunk of tests to be skipped.
Spotted this error because sometimes the gdb prompt does get processed
correctly and the final tests are run, causing it to show up in the
racy tests script output.
Fix by ensuring the prompt is always checked for. To do this the list
style needs reformatting so that variables get expanded.
2018-10-19 Alan Hayward <alan.hayward@arm.com>
* gdb.python/py-cmd.exp: Check for gdb_prompt.
|
|
I've written a couple of gdb unwinders in Python, and while doing so,
I wanted to find the architecture of the inferior. (In an unwinder in
particular, one can't use the frame's architecture, because there is
no frame.)
This patch adds Inferior.architecture to allow this. Normally I think
I would have chosen an attribute and not a method here, but seeing
that Frame.architecture is a method, I chose a method as well, for
consistency.
gdb/ChangeLog
2018-10-06 Tom Tromey <tom@tromey.com>
PR python/19399:
* python/py-inferior.c: Add "architecture" entry.
(infpy_architecture): New function.
gdb/doc/ChangeLog
2018-10-06 Tom Tromey <tom@tromey.com>
PR python/19399:
* python.texi (Inferiors In Python): Document
Inferior.Architecture.
gdb/testsuite/ChangeLog
2018-10-06 Tom Tromey <tom@tromey.com>
PR python/19399:
* gdb.python/py-inferior.exp: Add architecture test.
|
|
I noticed today that gdb.Breakpoint.location will crash when applied
to a catchpoint made with "catch throw".
The bug is that "catch throw" makes a breakpoint that is of type
bp_breakpoint, but which does not have a location.
Regression tested on x86-64 Fedora 28.
gdb/ChangeLog
2018-10-06 Tom Tromey <tom@tromey.com>
* python/py-breakpoint.c (bppy_get_location): Handle a
bp_breakpoint without a location.
gdb/testsuite/ChangeLog
2018-10-06 Tom Tromey <tom@tromey.com>
* gdb.python/py-breakpoint.exp (check_last_event): Check location
of a "throw" catchpoint.
|
|
This patch is another attempt to fix PR cli/19551. Unlike my previous
attempt, it doesn't print progress. Instead, it just changes some
messages and adds newlines to make the output a bit nicer.
It also removes the "done." text that was previously emitted. The
idea here is that it is obvious when gdb is done reading debug info,
as it starts then doing something else; and that while this message
did not provide much benefit to users, it did make it harder to make
the output clean.
After this change the output from "./gdb -iex 'set complaint 1' -nx ./gdb"
reads:
Reading symbols from ./gdb...
.debug_ranges entry has start address of zero [in module /home/tromey/gdb/build/gdb/gdb]
DW_AT_low_pc 0x0 is zero for DIE at 0x17116c1 [in module /home/tromey/gdb/build/gdb/gdb]
.debug_line address at offset 0xa22f5 is 0 [in module /home/tromey/gdb/build/gdb/gdb]
During symbol reading, unsupported tag: 'DW_TAG_unspecified_type'.
During symbol reading, const value length mismatch for 'std::ratio<1, 1000000000>::num', got 8, expected 0.
gdb/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
PR cli/19551:
* symfile.c (symbol_file_add_with_addrs): Update output.
* psymtab.c (require_partial_symbols): Update output.
gdb/testsuite/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
PR cli/19551:
* lib/mi-support.exp (mi_gdb_file_cmd): Update.
* lib/gdb.exp (gdb_file_cmd): Update.
* gdb.stabs/weird.exp (print_weird_var): Update.
* gdb.server/solib-list.exp: Update.
* gdb.multi/remove-inferiors.exp (test_remove_inferiors): Update.
* gdb.mi/mi-cli.exp: Update.
* gdb.linespec/linespec.exp: Update.
* gdb.dwarf2/dw2-stack-boundary.exp: Update.
* gdb.dwarf2/dw2-objfile-overlap.exp: Update.
* gdb.cp/cp-relocate.exp: Update.
* gdb.base/sym-file.exp: Update.
* gdb.base/relocate.exp: Update.
* gdb.base/readnever.exp: Update.
* gdb.base/print-symbol-loading.exp (test_load_core): Update.
* gdb.base/kill-detach-inferiors-cmd.exp: Update.
* gdb.base/dbx.exp (gdb_file_cmd): Update.
* gdb.base/code_elim.exp: Update.
* gdb.base/break-unload-file.exp (test_break): Update.
* gdb.base/break-interp.exp (test_attach_gdb): Update.
* gdb.base/break-idempotent.exp (force_breakpoint_re_set):
Update.
* gdb.base/attach.exp (do_attach_tests): Update.
* gdb.base/sepdebug.exp: Update.
* gdb.python/py-section-script.exp: Update.
|
|
A convention in the Python layer is that raising a gdb.GdbError will
not print the Python stack -- instead the exception is treated as any
other gdb exception.
PR python/18852 asks that this treatment be extended the the
get_set_value method of gdb.Parameter. This makes sense, because it
lets Python-created parameters act like gdb parameters.
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18852:
* python/py-param.c (get_set_value): Use gdbpy_handle_exception.
gdb/doc/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18852:
* python.texi (Parameters In Python): Document exception behavior
of get_set_string.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18852:
* gdb.python/py-parameter.exp: Add test for parameter that throws
on "set".
|
|
typy_template_argument did not check if the template argument was
non-negative. A negative value could cause a gdb crash.
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/17284:
* python/py-type.c (typy_template_argument): Check for negative
argument number.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/17284:
* gdb.python/py-template.exp (test_template_arg): Add test for
negative template argument number.
|
|
PR python/14062 points out that errors coming from the gdb.post_event
callback are not reported. This can make it hard to understand why
your Python code in gdb isn't working.
Because users have control over whether exceptions are printed at all,
it seems good to simply have post_event report errors in the usual
way.
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/14062:
* python/python.c (gdbpy_run_events): Do not ignore exceptions.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/14062:
* gdb.python/python.exp: Add test for post_event error.
|
|
PR python/18170 questions why it's not possible to convert a pointer
value to a Python int.
Digging a bit shows that the Python 2.7 int() constructor will happily
return a long in some cases. And, it seems gdb already understands
this in other places -- this is what gdb_py_object_from_longest
handles.
So, this patch simply extends valpy_int to allow pointer conversions,
as valpy_long does.
gdb/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18170:
* python/py-value.c (valpy_int): Allow conversion from pointer
type.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18170:
* gdb.python/py-value.exp (test_value_numeric_ops): Add tests to
convert pointers to int and long.
|
|
PR python/20126 points out that sometimes the conversion of a
gdb.Value can result in a negative Python integer. This happens
because valpy_int does not examine the signedness of the value's type.
gdb/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/20126:
* python/py-value.c (valpy_int): Respect type sign.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/20126:
* gdb.python/py-value.exp (test_value_numeric_ops): Add
signed-ness conversion tests.
|
|
PR python/18352 points out that the gdb Python code can't convert an
integer-valued gdb.Value to a Python float. While writing the test I
noticed that, similarly, converting integer gdb.Values to float does
not work. However, all of these cases seem reasonable.
gdb/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18352;
* python/py-value.c (valpy_float): Allow conversions from int or
char.
(valpy_int, valpy_long): Allow conversions from float.
gdb/testsuite/ChangeLog
2018-09-23 Tom Tromey <tom@tromey.com>
PR python/18352;
* gdb.python/py-value.exp (test_float_conversion): New proc.
Use it.
|
|
Since commit
56bcdbea2bed ("Let gdb.execute handle multi-line commands")
trying to use a command like gdb.execute("show commands") in Python
fails. GDB ends up trying to run the "commands" command.
The reason is that GDB gets confused with the special "commands"
command. In process_next_line, the lookup_cmd_1 function returns the
cmd_list_element representing the "commands" sub-command of "show".
Lower, we check the cmd_list_element to see if it matches various
control commands by name, including the "commands" command. This is
where we wrongfully conclude that the executed command must be
"commands", when in reality it was "show commands".
The fix proposed in this patch removes the comparisons by name, instead
comparing the cmd_list_element object by pointer with the objects
created at initialization time.
Tested on the buildbot, though on a single builder (Fedora-x86_64-m64).
gdb/ChangeLog:
PR python/23669
* breakpoint.c (commands_cmd_element): New.
(_initialize_breakpoint): Assign commands_cmd_element.
* breakpoint.h (commands_cmd_element): New.
* cli/cli-script.c (while_cmd_element, if_command,
define_cmd_element): New.
(command_name_equals): Remove.
(process_next_line): Compare commands by pointer, not by name.
(_initialize_cli_script): Assign the various cmd_list_element
variables.
* compile/compile.c (compile_cmd_element): New.
(_initialize_compile): Assign compile_cmd_element.
* compile/compile.h (compile_cmd_element): New.
* guile/guile.c (guile_cmd_element): New.
(install_gdb_commands): Assign guile_cmd_element.
* guile/guile.h (guile_cmd_element): New.
* python/python.c (python_cmd_element): New.
(_initialize_python): Assign python_cmd_element.
* python/python.h (python_cmd_element): New.
* tracepoint.c (while_stepping_cmd_element): New.
(_initialize_tracepoint): Assign while_stepping_cmd_element.
* tracepoint.h (while_stepping_cmd_element): New.
gdb/testsuite/ChangeLog:
PR python/23669
* gdb.python/python.exp: Test gdb.execute("show commands").
|
|
This patch adds an objfiles method to the Progspace object, which
returns a sequence of the objfiles associated to that program space. I
chose a method rather than a property for symmetry with gdb.objfiles().
gdb/ChangeLog:
* python/py-progspace.c (PSPY_REQUIRE_VALID): New macro.
(pspy_get_objfiles): New function.
(progspace_object_methods): New.
(pspace_object_type): Add tp_methods callback.
* python/python-internal.h (build_objfiles_list): New
declaration.
* python/python.c (build_objfiles_list): New function.
(gdbpy_objfiles): Implement using build_objfiles_list.
* NEWS: Mention the Progspace.objfiles method.
gdb/doc/ChangeLog:
* python.texi (Program Spaces In Python): Document the
Progspace.objfiles method.
(Objfiles In Python): Mention that gdb.objfiles() is identical
to gdb.selected_inferior().progspace.objfiles().
gdb/testsuite/ChangeLog:
* gdb.python/py-progspace.exp: Test the Progspace.objfiles
method.
|
|
This patch adds a progspace property to the gdb.Inferior type, which
allows getting the gdb.Progspace object associated to that inferior.
In conjunction with the following patch, this will allow scripts iterate
on objfiles associated with a particular inferior.
gdb/ChangeLog:
* python/py-inferior.c (infpy_get_progspace): New function.
(inferior_object_getset): Add progspace property.
* NEWS: Mention the new property.
gdb/doc/ChangeLog:
* python.texi (Inferiors In Python): Document
Inferior.progspace.
(Program Spaces In Python): Document that
gdb.current_progspace() is the same as
gdb.selected_inferior().progspace.
gdb/testsuite/ChangeLog:
* gdb.python/py-inferior.exp: Add tests for Inferior.progspace
and a few other Inferior properties when the Inferior is no
longer valid.
|
|
Printing a GDB Python object is notoriously not helpful:
>>> print(gdb.selected_inferior())
<gdb.Inferior object at 0x7fea59aed198>
>>> print(gdb.objfiles())
[<gdb.Objfile object at 0x7fea59b57c90>]
This makes printing debug traces more difficult than it should be. This
patch provides some repr() implementation for these two types (more to
come if people agree with the idea, but I want to test the water first).
Here's the same example as above, but with this patch:
>>> print(gdb.selected_inferior())
<gdb.Inferior num=1>
>>> print(gdb.objfiles())
[<gdb.Objfile filename=/home/emaisin/build/binutils-gdb-gcc-git/gdb/test>]
I implemented repr rather than str, because when printing a list (or
another container I suppose), Python calls the repr method of the
elements. This is useful when printing a list of inferiors or objfiles.
The print(gdb.objfiles()) above would not have worked if I had
implemented str.
I found this post useful to understand the difference between repr and
str:
https://stackoverflow.com/questions/1436703/difference-between-str-and-repr
gdb/ChangeLog:
* python/py-inferior.c (infpy_repr): New.
(inferior_object_type): Register infpy_repr.
* python/py-objfile.c (objfpy_repr): New.
(objfile_object_type): Register objfpy_repr.
gdb/testsuite/ChangeLog:
* gdb.python/py-inferior.exp: Test repr() of gdb.Inferior.
* gdb.python/py-objfile.exp: Test repr() of gdb.Objfile.
* gdb.python/py-symtab.exp: Update test printing an objfile.
gdb/doc/ChangeLog:
* python.texi (Basic Python): Mention the string representation
of GDB Python objects.
|
|
This patch adds tests for trying to use property or methods on a
gdb.Inferior object that represents an inferior that does not exist
anymore. We expect an exception to be thrown.
gdb/testsuite/ChangeLog:
* gdb.python/py-inferior.exp: Test using an invalid gdb.Inferior
object.
|
|
I noticed that the py-prettyprint.exp test names were not unique.
This patch fixes the problem via with_test_prefix.
gdb/testsuite/ChangeLog
2018-09-08 Tom Tromey <tom@tromey.com>
* gdb.python/py-prettyprint.exp: Use with_test_prefix.
|
|
PR python/16047 points out that, while the documentation says that the
to_string method is optional for a pretty-printer, the code disagrees
and throws an exception. This patch fixes the problem. varobj is
already ok here.
Tested on x86-64 Fedora 26.
gdb/ChangeLog
2018-09-08 Tom Tromey <tom@tromey.com>
PR python/16047:
* python/py-prettyprint.c (pretty_print_one_value): Check for
to_string method.
gdb/testsuite/ChangeLog
2018-09-08 Tom Tromey <tom@tromey.com>
PR python/16047:
* gdb.python/py-prettyprint.py (pp_int_typedef3): New class.
(register_pretty_printers): Register new printer.
* gdb.python/py-prettyprint.exp (run_lang_tests): Add int_type3
test.
* gdb.python/py-prettyprint.c (int_type3): New typedef.
(an_int_type3): New global.
|
|
Commit 6d52907e226a (MI: Print frame architecture when printing frames
on an MI channel) added frame's architecture to MI frame output. However
the frame architecture was not correctly printed in the output of
"-stack-list-frames" with frame filters enabled (via "-enable-frame-filters").
This was because with frame filters enabled, the actual frame printing is
done in "py_print_frame" rather than "print_frame". This issue is now fixed.
gdb/Changelog:
2018-08-27 Jan Vrany <jan.vrany@fit.cvut.cz>
* python/py-framefilter.c (py_print_frame): Print frame architecture
when printing on an MI output.
gdb/testsuite/Changelog:
2018-08-27 Jan Vrany <jan.vrany@fit.cvut.cz>
* gdb.python/py-framefilter-mi.exp: Update regexp to
check for "arch" field in frame output.
|
|
This fails for me on openSUSE leap 15.0:
...
FAIL: gdb.python/py-rbreak.exp: check number of returned breakpoints is 11
...
The rbreak "" command expects 11 breaks, but I see two extra for
__libc_csu_fini and __libc_csu_init:
...
Breakpoint 13 at 0x4005b0: file elf-init.c, line 106.^M
Breakpoint 14 at 0x400540: file elf-init.c, line 68.^M
...
This patch fixes the failing test by excluding functions starting with an
underscore.
Tested on x86_64-linux.
2018-08-04 Tom de Vries <tdevries@suse.de>
* gdb.python/py-rbreak.exp: Fix rbreak regexp.
|
|
Invoking -var-info-path-expression on a dynamic varobj lead either in wrong
(nonsense) result or to a segmentation fault in cplus_describe_child().
This was caused by the fact that varobj_get_path_expr() called
cplus_path_expr_of_child() ignoring the fact the parent of the variable
is dynamic. Then, cplus_describe_child() accessed the underlaying C type
members by index, causing (i) either wrong (nonsense) expression being
returned (since dynamic child may be completely arbibtrary value)
or (ii) segmentation fault (in case the index higher than number of
underlaying C type members.
This fixes the problem by checking whether a varobj is a child of a dynamic
varobj and, if so, reporting an error as described in documentation.
gdb/ChangeLog:
* varobj.c (varobj_get_path_expr_parent): Report an error if
parent is a dynamic varobj.
gdb/testsuite/Changelog:
* gdb.python/py-mi-var-info-path-expression.c: New file.
* gdb.python/py-mi-var-info-path-expression.py: New file.
* gdb.python/py-mi-var-info-path-expression.exp: New file.
|
|
This adds a "continue" response to the pager. If the user types "c"
in response to the pager prompt, pagination will be disabled for the
duration of one command -- but re-enabled afterward. This is handy if
you type a command that produces a lot of output, and you don't want
to baby-sit it by typing "return" each time the prompt comes up.
Tested by the buildbot.
gdb/ChangeLog
2018-06-05 Tom Tromey <tom@tromey.com>
PR cli/12326:
* NEWS: Add entry about pager.
* utils.c (pagination_disabled_for_command): New global.
(prompt_for_continue): Allow "c" response to prompt.
(reinitialize_more_filter): Clear
pagination_disabled_for_command.
(fputs_maybe_filtered): Check pagination_disabled_for_command.
gdb/doc/ChangeLog
2018-06-05 Tom Tromey <tom@tromey.com>
PR cli/12326:
* gdb.texinfo (Screen Size): Document "c" response to pagination
prompt.
gdb/testsuite/ChangeLog
2018-06-05 Tom Tromey <tom@tromey.com>
PR cli/12326:
* gdb.cp/static-print-quit.exp: Update.
* lib/gdb.exp (pagination_prompt): Update.
* gdb.base/page.exp: Use pagination_prompt. Add new tests.
* gdb.python/python.exp: Update.
|
|
It's long bothered me that setting a Python parameter from the CLI
will print the "set" help text by default. I think usually "set"
commands should be silent. And, while you can modify this behavior a
bit by providing a "get_set_string" method, if this method returns an
empty string, a blank line will be printed.
This patch removes the "help" behavior and changes the get_set_string
behavior to avoid printing a blank line. The code has a comment about
preserving API behavior, but I don't think this is truly important;
and in any case the workaround -- implementing get_set_string -- is
trivial.
Regression tested on x86-64 Fedora 26.
2018-04-26 Tom Tromey <tom@tromey.com>
* NEWS: Mention new "set" behavior.
* python/py-param.c (get_set_value): Don't print an empty string.
Don't call get_doc_string.
gdb/doc/ChangeLog
2018-04-26 Tom Tromey <tom@tromey.com>
* python.texi (Parameters In Python): Update get_set_string
documentation.
|
|
This adds a basic Python API for accessing convenience variables.
With this, convenience variables can be read and set from Python.
Although gdb supports convenience variables whose value changes at
each call, this is not exposed to Python; it could be, but I think
it's just as good to write a convenience function in this situation.
This is PR python/23080.
Tested on x86-64 Fedora 26.
2018-04-22 Tom Tromey <tom@tromey.com>
PR python/23080:
* NEWS: Update for new functions.
* python/py-value.c (gdbpy_set_convenience_variable)
(gdbpy_convenience_variable): New functions.
* python/python-internal.h (gdbpy_convenience_variable)
(gdbpy_set_convenience_variable): Declare.
* python/python.c (python_GdbMethods): Add convenience_variable,
set_convenience_variable.
doc/ChangeLog
2018-04-22 Tom Tromey <tom@tromey.com>
PR python/23080:
* python.texi (Basic Python): Document gdb.convenience_variable,
gdb.set_convenience_variable.
testsuite/ChangeLog
2018-04-22 Tom Tromey <tom@tromey.com>
PR python/23080:
* gdb.python/python.exp: Add convenience variable tests.
|
|
This changes the Python API so that gdb.execute can now handle
multi-line commands, like "commands" or "define".
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR python/22730:
* NEWS: Mention gdb.execute change.
* gdbcmd.h (execute_control_command): Don't declare.
* python/python.c (execute_gdb_command): Use read_command_lines_1,
execute_control_commands, execute_control_commands_to_string.
* cli/cli-script.h (execute_control_commands)
(execute_control_commands_to_string): Declare.
(execute_control_command): Add from_tty parameter.
* cli/cli-script.c (execute_control_commands)
(execute_control_commands_to_string): New functions.
(execute_user_command): Use execute_control_commands.
(execute_control_command_1): Add "from_tty" parameter. Update.
(execute_control_command): Likewise.
testsuite/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR python/22730:
* gdb.python/python.exp: Test multi-line execute.
|
|
This changes the Python API so that breakpoint commands can be set by
writing to the "commands" attribute.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR python/22731:
* NEWS: Mention that breakpoint commands are writable.
* python/py-breakpoint.c (bppy_set_commands): New function.
(breakpoint_object_getset) <"commands">: Use it.
doc/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR python/22731:
* python.texi (Breakpoints In Python): Mention that "commands" is
writable.
testsuite/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR python/22731:
* gdb.python/py-breakpoint.exp: Test setting breakpoint commands.
|
|
Pedro pointed out that a test in py-parameter.exp had an empty
message. This fixes it.
testsuite/ChangeLog
2018-05-02 Tom Tromey <tom@tromey.com>
* gdb.python/py-parameter.exp: Set test message.
|
|
PR python/20084 points out that the Python API doesn't handle the
var_zuinteger and var_zuinteger_unlimited parameter types.
This patch adds support for these types.
Regression tested on x86-64 Fedora 26.
ChangeLog
2018-05-02 Tom Tromey <tom@tromey.com>
PR python/20084:
* python/python.c (gdbpy_parameter_value): Handle var_zuinteger
and var_zuinteger_unlimited.
* python/py-param.c (struct parm_constant): Add PARAM_ZUINTEGER
and PARAM_ZUINTEGER_UNLIMITED.
(set_parameter_value): Handle var_zuinteger and
var_zuinteger_unlimited.
(add_setshow_generic): Likewise.
(parmpy_init): Likewise.
doc/ChangeLog
2018-05-02 Tom Tromey <tom@tromey.com>
PR python/20084:
* python.texi (Parameters In Python): Document PARAM_ZUINTEGER and
PARAM_ZUINTEGER_UNLIMITED.
testsuite/ChangeLog
2018-05-02 Tom Tromey <tom@tromey.com>
PR python/20084:
* gdb.python/py-parameter.exp: Add PARAM_ZUINTEGER and
PARAM_ZUINTEGER_UNLIMITED tests.
|
|
This adds an "alignof" attribute to gdb.Type in the Python API.
2018-04-30 Tom Tromey <tom@tromey.com>
* NEWS: Mention Type.align.
* python/py-type.c (typy_get_alignof): New function.
(type_object_getset): Add "alignof".
2018-04-30 Tom Tromey <tom@tromey.com>
* python.texi (Types In Python): Document Type.align.
2018-04-30 Tom Tromey <tom@tromey.com>
* gdb.python/py-type.exp: Check align attribute.
* gdb.python/py-type.c: New "aligncheck" global.
|
|
If a C-c comes while the Python code for a frame filter is running, it
will be turned into a Python KeyboardException. It seems good for
this to be treated like a GDB quit, so this patch changes
py-framefilter.c to notice this situation and call throw_quit in this
case.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (throw_quit_or_print_exception): New
function.
(gdbpy_apply_frame_filter): Use it.
gdb/testsuite/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
* gdb.python/py-framefilter.exp: Add test for KeyboardInterrupt.
* gdb.python/py-framefilter.py (name_error): New global.
(ErrorInName.function): Use name_error.
|
|
When a frame filter elides some frames, they are still printed by
"bt", indented a few spaces. PR backtrace/15582 notes that it would
be nice for users if elided frames could simply be dropped. This
patch adds this capability.
gdb/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
PR backtrace/15582:
* stack.c (backtrace_command): Parse "hide" argument.
* python/py-framefilter.c (py_print_frame): Handle PRINT_HIDE.
* extension.h (enum frame_filter_flags) <PRINT_HIDE>: New
constant.
gdb/doc/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
PR backtrace/15582:
* gdb.texinfo (Backtrace): Mention "hide" argument.
gdb/testsuite/ChangeLog
2018-03-26 Tom Tromey <tom@tromey.com>
PR backtrace/15582:
* gdb.python/py-framefilter.exp: Add "bt hide" test.
|
|
In the GDB test suite, there are still multiple invocations of
"target_info exists use_gdb_stub". However, the recommended way of
checking for use_gdb_stub is to call the convenience function of the same
name.
Replace these occurrences and just call "use_gdb_stub" instead.
gdb/testsuite/ChangeLog:
* gdb.ada/exec_changed.exp: Replace "target_info exists
use_gdb_stub" by "use_gdb_stub".
* gdb.ada/start.exp: Likewise.
* gdb.base/async-shell.exp: Likewise.
* gdb.base/attach-pie-misread.exp: Likewise.
* gdb.base/attach-wait-input.exp: Likewise.
* gdb.base/break-entry.exp: Likewise.
* gdb.base/break-interp.exp: Likewise.
* gdb.base/dprintf-detach.exp: Likewise.
* gdb.base/nostdlib.exp: Likewise.
* gdb.base/solib-nodir.exp: Likewise.
* gdb.base/statistics.exp: Likewise.
* gdb.base/testenv.exp: Likewise.
* gdb.mi/mi-exec-run.exp: Likewise.
* gdb.mi/mi-start.exp: Likewise.
* gdb.multi/dummy-frame-restore.exp: Likewise.
* gdb.multi/multi-arch-exec.exp: Likewise.
* gdb.multi/multi-arch.exp: Likewise.
* gdb.multi/tids.exp: Likewise.
* gdb.multi/watchpoint-multi.exp: Likewise.
* gdb.python/py-events.exp: Likewise.
* gdb.threads/attach-into-signal.exp: Likewise.
* gdb.threads/attach-stopped.exp: Likewise.
* gdb.threads/threadapply.exp: Likewise.
* lib/selftest-support.exp: Likewise.
|
|
PR python/16497 notes that using "bt" with a positive argument prints
the wrong number of frames when a frame filter is in use. Also, in this
case, the non-frame-filter path will print a message about "More stack
frames" when there are more; but this is not done in the frame-filter
case.
The first problem is that backtrace_command_1 passes the wrong value
to apply_ext_lang_frame_filter -- that function takes the final
frame's number as an argument, but backtrace_command_1 passes the
count, which is off by one.
The solution to the second problem is to have the C stack-printing
code stop at the correct number of frames and then print the message.
Tested using the buildbot.
ChangeLog
2018-02-26 Tom Tromey <tom@tromey.com>
PR python/16497:
* stack.c (backtrace_command_1): Set PRINT_MORE_FRAMES flag. Fix
off-by-one in py_end computation.
* python/py-framefilter.c (gdbpy_apply_frame_filter): Handle
PRINT_MORE_FRAMES.
* extension.h (enum frame_filter_flags) <PRINT_MORE_FRAMES>: New
constant.
2018-02-26 Tom Tromey <tom@tromey.com>
PR python/16497:
* gdb.python/py-framefilter.exp: Update test.
|
|
Make the MI variable object expression evaluation, with the
-var-evaluate-expression command, recursively call pretty printers, to
match the output of normal expression printing.
Consider the following code:
struct Foo { int val; };
struct Wrapper { Foo foo; };
int main() {
Wrapper w;
w.foo.val = 23;
}
and this pretty printer file:
import gdb.printing
class FooPrinter:
def __init__(self, val):
self.val = val
def to_string(self):
return "Foo" + str(self.val["val"])
class WrapperPrinter:
def __init__(self, val):
self.val = val
def to_string(self):
return self.val["foo"]
test_printer = gdb.printing.RegexpCollectionPrettyPrinter("test")
test_printer.add_printer('Foo', '^Foo$', FooPrinter)
test_printer.add_printer('Wrapper', '^Wrapper$', WrapperPrinter)
gdb.printing.register_pretty_printer(None, test_printer)
Setting a breakpoint at the end of the function, we call the following commands:
-enable-pretty-printing
^done
-var-create var_w @ w
^done,name="var_w",numchild="0",value="{val = 23}",type="Wrapper",dynamic="1",has_more="0"
-var-create var_w_foo @ w.foo
^done,name="var_w_foo",numchild="0",value="Foo23",type="Foo",dynamic="1",has_more="0"
-var-evaluate-expression var_w
^done,value="{val = 23}"
-var-evaluate-expression var_w_foo
^done,value="Foo23"
-data-evaluate-expression w
^done,value="Foo23"
-data-evaluate-expression w.foo
^done,value="Foo23"
So, in the -var-evaluate-expression var_w case, we print the "raw" value
of w.foo, while in the -data-evaluate-expression w case, we print the
pretty printed w.foo value. After this patch, all of the above print
"Foo23".
gdb/ChangeLog:
* varobj.c (varobj_formatted_print_options): Allow recursive
pretty printing if pretty printing is enabled.
gdb/testsuite/ChangeLog:
* gdb.python/py-prettyprint.c
(struct to_string_returns_value_inner,
struct to_string_returns_value_wrapper): New.
(main): Add tsrvw variable.
* gdb.python/py-prettyprint.py (ToStringReturnsValueInner,
ToStringReturnsValueWrapper): New classes.
(register_pretty_printers): Register new pretty-printers.
* gdb.python/py-prettyprint.exp (run_lang_tests): Test printing
recursive pretty printer.
* gdb.python/py-mi.exp: Likewise.
|
|
When creating a varobj with -var-create a user can create either fixed
varobj, or floating varobj.
A fixed varobj will always be evaluated within the thread/frame/block in
which the varobj was created, if that thread/frame/block is no longer
available then the varobj is considered out of scope.
A floating varobj will always be evaluated within the current
thread/frame/block.
Despite never using them GDB was storing the thread/frame/block into a
floating varobj, and the thread-id would then be displayed when GDB
reported on the state of the varobj, this could confuse a user into
thinking that the thread-id was relevant.
This commit prevents GDB storing the thread/frame/block onto floating
varobj, and updates the few tests where this impacts the results.
gdb/ChangeLog:
* varobj.c (varobj_create): Don't set valid_block when creating a
floating varobj.
gdb/testsuite/ChangeLog:
* gdb.python/py-mi.exp: Don't expect a thread-id for floating
varobj.
* gdb.mi/mi-var-create-rtti.exp: Likewise.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|
This patch adds the possibility to pass a qualified=True|False parameter
when creating a breakpoint in Python. It is equivalent to using
-qualified in a linespec. The parameter actually accepts any Python
value, and converts it to boolean using Python's standard rules for
that (https://docs.python.org/3/library/stdtypes.html#truth).
Unlike the -source/-line/-function/-label parameters, it is possible to
use -qualified with a "normal" (non-explicit) linespec. Therefore, it
is possible (unlike these other parameters) to use this new parameter
along with the spec parameter.
I updated the py-breakpoint.exp test. To be able to test multiple
locations using a namespace, I had to switch the test case to compile as
C++. If we really wanted to, we could run it as both C and C++, but
omit the C++-specific parts when running it as C.
gdb/ChangeLog:
* location.h (string_to_event_location): Add match_type
parameter.
* location.c (string_to_event_location): Likewise.
* python/py-breakpoint.c (bppy_init): Handle qualified
parameter.
gdb/doc/ChangeLog:
* python.texi (Manipulating breakpoints using Python): Document
qualified parameter to gdb.Breakpoint.
gdb/testsuite/ChangeLog:
* gdb.python/py-breakpoint.c (foo_ns::multiply): New function.
* gdb.python/py-breakpoint.exp: Compile the test case as c++,
call test_bkpt_qualified.
(test_bkpt_qualified): New proc.
|
|
The prefix in test_bkpt_explicit_loc is wrong. Instead of using
with_test_prefix directly, define test_bkpt_explicit_loc with
proc_with_prefix.
gdb/testsuite/ChangeLog:
* gdb.python/py-breakpoint.exp (test_bkpt_explicit_loc): Define
with proc_with_prefix, don't use with_test_prefix.
|
|
This introduces several new keywords to the bppy_init constructor.
The spec parameter is now optional but mutually exclusive to the
explicit keywords source, label, function and line.
gdb/ChangeLog
2017-12-07 Phil Muldoon <pmuldoon@redhat.com>
* python/py-breakpoint.c (bppy_init): Use string_to_event_location
over basic location code. Implement explicit location keywords.
(bppy_init_validate_args): New function.
* NEWS: Document Python explicit breakpoint locations.
doc/ChangeLog
2017-12-07 Phil Muldoon <pmuldoon@redhat.com>
* python.texi (Breakpoints In Python): Add text relating
to allowed explicit locations and keywords in gdb.Breakpoints.
testsuite/ChangeLog
2017-12-07 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-breakpoint.exp (test_bkpt_explicit_loc): Add new
tests for explicit locations.
|
|
is installed.
2017-11-29 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-rbreak.exp: Set nosharedlibrary before tests.
|
|
gdb/Changelog
2017-11-16 Phil Muldoon <pmuldoon@redhat.com>
* python/python.c (gdbpy_rbreak): New function.
* NEWS: Document Python rbreak feature.
testsuite/Changelog
2017-11-16 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-rbreak.exp: New file.
* gdb.python/py-rbreak.c: New file.
* gdb.python/py-rbreak-func2.c: New file.
doc/Changelog
2017-11-16 Phil Muldoon <pmuldoon@redhat.com>
* python.texi (Basic Python): Add rbreak documentation.
|
|
gdb/testsuite:
2017-11-03 Yao Qi <yao.qi@linaro.org>
* gdb.python/py-thrhandle.exp: Skip it if python is not
enabled.
|
|
thpy_get_inferior function should return a new reference to the
existing inferior object, and therefore should increment its refcount.
Fixed bug looks like this.
If multiple time call gdb.selected_thread ().inferior, gdb throws exception:
(gdb) pi gdb.selected_thread().inferior
<gdb.Inferior object at 0x7f1952bea698>
(gdb) pi gdb.selected_thread().inferior
Python Exception <type 'exceptions.AttributeError'> 'NoneType' object
has no attribute 'inferior':
Error while executing Python code.
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7f54f0474740 (LWP 584) "mc" 0x00007f54ef055c33 in
|
|
Use proc_with_prefix to avoid having to call with_test_prefix with a
duplicate of the proc name. The diff is mostly lines being re-indented.
gdb/testsuite/ChangeLog:
* gdb.python/py-breakpoint.exp (test_bkpt_basic,
test_bkpt_deletion, test_bkpt_cond_and_cmds,
test_bkpt_invisible, test_watchpoints, test_bkpt_internal,
test_bkpt_eval_funcs, test_bkpt_temporary, test_bkpt_address,
test_bkpt_pending, test_bkpt_events): Use proc_with_prefix,
remove with_test_prefix.
|
|
This testcase works fine with gdbserver nowadays. So remove the
kfail.
gdb/testsuite/ChangeLog:
2017-10-13 Pedro Alves <palves@redhat.com>
Simon Marchi <simon.marchi@polymtl.ca>
PR python/12966
* gdb.python/py-evthreads.exp: Remove is_remote target kfail.
|
|
Fixes:
Running ..../src/gdb/testsuite/gdb.python/py-evthreads.exp ...
FAIL: gdb.python/py-evthreads.exp: run to breakpoint 1
FAIL: gdb.python/py-evthreads.exp: reached breakpoint 2
FAIL: gdb.python/py-evthreads.exp: thread 2
FAIL: gdb.python/py-evthreads.exp: reached breakpoint 3
FAIL: gdb.python/py-evthreads.exp: thread 3
FAIL: gdb.python/py-evthreads.exp: continue thread 1
[... cascading time outs ...]
By following the usual pattern that makes sure that non-stop is enabled
before connecting to gdbserver.
gdb/testsuite/ChangeLog:
2017-10-13 Pedro Alves <palves@redhat.com>
* gdb.python/py-evthreads.exp: Start GDB with "set non-stop on"
already.
|
|
Fixes, with --target_board=native-extended-gdbserver:
Running ..../src/gdb/testsuite/gdb.python/py-evsignal.exp ...
FAIL: gdb.python/py-evsignal.exp: signal Thread 3
gdb/testsuite/ChangeLog:
2017-10-13 Pedro Alves <palves@redhat.com>
* gdb.python/py-evsignal.exp: Check gdb_protocol instead of
is_remote.
|
|
As the title says, this is a test case for
Inferior.thread_from_thread_handle, a python method which will,
given a thread library dependent thread handle, find the GDB thread
which corresponds to that thread handle (in the inferior under
consideration).
The C file for this test case causes the thread handles for the
main thread and two child threads to be placed into an array. The
test case runs to one of the functions (do_something()) at which point,
it retrieves the thread handles from the array and attempts to find the
corresponding thread in GDB's internal thread list.
I use barriers to make sure that both threads have actually started;
execution will stop when one of the threads breaks at do_something.
Thanks to Simon Marchi for suggestions for forcing the thread
numbering to be stable.
gdb/testsuite/ChangeLog:
* gdb.python/py-thrhandle.c, gdb.python/py-thrhandle.exp: New
files.
|
|
This adds a few new events to gdb's Python layer: new_inferior,
inferior_deleted, and new_thread. I wanted to be able to add a
combined inferior/thread display window to my GUI, and I needed a few
events to make this work. This is PR python/15622.
ChangeLog
2017-09-11 Tom Tromey <tom@tromey.com>
PR python/15622:
* NEWS: Add entry.
* python/python.c (do_start_initialization): Initialize new event
types.
* python/python-internal.h (gdbpy_initialize_new_inferior_event)
(gdbpy_initialize_inferior_deleted_event)
(gdbpy_initialize_new_thread_event): Declare.
* python/py-threadevent.c (create_thread_event_object): Add option
"thread" parameter.
* python/py-inferior.c (new_thread_event_object_type)
(new_inferior_event_object_type)
(inferior_deleted_event_object_type): Declare.
(python_new_inferior, python_inferior_deleted): New functions.
(add_thread_object): Emit new_thread event.
(gdbpy_initialize_inferior): Attach new functions to corresponding
observers.
(new_thread, new_inferior, inferior_deleted): Define new event
types.
* python/py-evts.c (gdbpy_initialize_py_events): Add new
registries.
* python/py-events.h (events_object) <new_inferior,
inferior_deleted, new_thread>: New fields.
* python/py-event.h (create_thread_event_breakpoint): Add optional
"thread" parameter.
doc/ChangeLog
2017-09-11 Tom Tromey <tom@tromey.com>
* python.texi (Events In Python): Document new events.
testsuite/ChangeLog
2017-09-11 Tom Tromey <tom@tromey.com>
* gdb.python/py-infthread.exp: Add tests for new_thread event.
* gdb.python/py-inferior.exp: Add tests for new inferior events.
|
