aboutsummaryrefslogtreecommitdiff
path: root/gdb/python/py-gdb-readline.c
AgeCommit message (Collapse)AuthorFilesLines
2021-01-01Update copyright year range in all GDB filesJoel Brobecker1-1/+1
This commits the result of running gdb/copyright.py as per our Start of New Year procedure... gdb/ChangeLog Update copyright year range in copyright header of all GDB files.
2020-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files.
2019-11-08Constify command_line_inputTom Tromey1-1/+2
This changes command_line_input to return a "const char *", which is appropriate because the memory is owned by command_line_input. Then it fixes up the users. I looked at making command_line_input transfer ownership to its caller instead, but this is complicated due to the way read_next_line is called, so I decided against it. Tested by rebuilding. gdb/ChangeLog 2019-11-08 Tom Tromey <tromey@adacore.com> * top.c (read_command_file): Update. (command_line_input): Make return type const. * python/py-gdb-readline.c: Update. * linespec.c (decode_line_2): Update. * defs.h (command_line_input): Make return type const. * cli/cli-script.c (read_next_line): Make return type const. * ada-lang.c (get_selections): Update. Change-Id: I27e6c9477fd1005ab5b16e0d337e4c015b6e6248
2019-04-08Rename gdb exception typesTom Tromey1-1/+1
This renames the gdb exception types. The old types were only needed due to the macros in common-exception.h that are now gone. The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem needed, so this patch removes it entirely. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL): Remove. (gdb_exception_error): Rename from gdb_exception_RETURN_MASK_ERROR. (gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT. (gdb_quit_bad_alloc): Update. * aarch64-tdep.c: Update. * ada-lang.c: Update. * ada-typeprint.c: Update. * ada-valprint.c: Update. * amd64-tdep.c: Update. * arch-utils.c: Update. * break-catch-throw.c: Update. * breakpoint.c: Update. * btrace.c: Update. * c-varobj.c: Update. * cli/cli-cmds.c: Update. * cli/cli-interp.c: Update. * cli/cli-script.c: Update. * common/common-exceptions.c: Update. * common/new-op.c: Update. * common/selftest.c: Update. * compile/compile-c-symbols.c: Update. * compile/compile-cplus-symbols.c: Update. * compile/compile-object-load.c: Update. * compile/compile-object-run.c: Update. * completer.c: Update. * corelow.c: Update. * cp-abi.c: Update. * cp-support.c: Update. * cp-valprint.c: Update. * darwin-nat.c: Update. * disasm-selftests.c: Update. * dtrace-probe.c: Update. * dwarf-index-cache.c: Update. * dwarf-index-write.c: Update. * dwarf2-frame-tailcall.c: Update. * dwarf2-frame.c: Update. * dwarf2loc.c: Update. * dwarf2read.c: Update. * eval.c: Update. * event-loop.c: Update. * event-top.c: Update. * exec.c: Update. * f-valprint.c: Update. * fbsd-tdep.c: Update. * frame-unwind.c: Update. * frame.c: Update. * gdbtypes.c: Update. * gnu-v3-abi.c: Update. * guile/guile-internal.h: Update. * guile/scm-block.c: Update. * guile/scm-breakpoint.c: Update. * guile/scm-cmd.c: Update. * guile/scm-disasm.c: Update. * guile/scm-frame.c: Update. * guile/scm-lazy-string.c: Update. * guile/scm-math.c: Update. * guile/scm-param.c: Update. * guile/scm-ports.c: Update. * guile/scm-pretty-print.c: Update. * guile/scm-symbol.c: Update. * guile/scm-symtab.c: Update. * guile/scm-type.c: Update. * guile/scm-value.c: Update. * i386-linux-tdep.c: Update. * i386-tdep.c: Update. * inf-loop.c: Update. * infcall.c: Update. * infcmd.c: Update. * infrun.c: Update. * jit.c: Update. * language.c: Update. * linespec.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-tdep.c: Update. * linux-thread-db.c: Update. * main.c: Update. * mi/mi-cmd-break.c: Update. * mi/mi-cmd-stack.c: Update. * mi/mi-interp.c: Update. * mi/mi-main.c: Update. * objc-lang.c: Update. * p-valprint.c: Update. * parse.c: Update. * ppc-linux-tdep.c: Update. * printcmd.c: Update. * python/py-arch.c: Update. * python/py-breakpoint.c: Update. * python/py-cmd.c: Update. * python/py-finishbreakpoint.c: Update. * python/py-frame.c: Update. * python/py-framefilter.c: Update. * python/py-gdb-readline.c: Update. * python/py-inferior.c: Update. * python/py-infthread.c: Update. * python/py-lazy-string.c: Update. * python/py-linetable.c: Update. * python/py-objfile.c: Update. * python/py-param.c: Update. * python/py-prettyprint.c: Update. * python/py-progspace.c: Update. * python/py-record-btrace.c: Update. * python/py-record.c: Update. * python/py-symbol.c: Update. * python/py-type.c: Update. * python/py-unwind.c: Update. * python/py-utils.c: Update. * python/py-value.c: Update. * python/python.c: Update. * record-btrace.c: Update. * record-full.c: Update. * remote-fileio.c: Update. * remote.c: Update. * riscv-tdep.c: Update. * rs6000-aix-tdep.c: Update. * rs6000-tdep.c: Update. * rust-exp.y: Update. * rust-lang.c: Update. * s390-tdep.c: Update. * selftest-arch.c: Update. * solib-dsbt.c: Update. * solib-frv.c: Update. * solib-spu.c: Update. * solib-svr4.c: Update. * solib.c: Update. * sparc64-linux-tdep.c: Update. * stack.c: Update. * symfile-mem.c: Update. * symmisc.c: Update. * target.c: Update. * thread.c: Update. * top.c: Update. * tracefile-tfile.c: Update. * tui/tui.c: Update. * typeprint.c: Update. * unittests/cli-utils-selftests.c: Update. * unittests/parse-connection-spec-selftests.c: Update. * valops.c: Update. * valprint.c: Update. * value.c: Update. * varobj.c: Update. * windows-nat.c: Update. * x86-linux-nat.c: Update. * xml-support.c: Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * gdbreplay.c: Update. * linux-low.c: Update. * server.c: Update.
2019-04-08Rewrite TRY/CATCHTom Tromey1-3/+2
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was largely written by script, though one change (to a comment in common-exceptions.h) was reverted by hand. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c: Use C++ exception handling. * x86-linux-nat.c: Use C++ exception handling. * windows-nat.c: Use C++ exception handling. * varobj.c: Use C++ exception handling. * value.c: Use C++ exception handling. * valprint.c: Use C++ exception handling. * valops.c: Use C++ exception handling. * unittests/parse-connection-spec-selftests.c: Use C++ exception handling. * unittests/cli-utils-selftests.c: Use C++ exception handling. * typeprint.c: Use C++ exception handling. * tui/tui.c: Use C++ exception handling. * tracefile-tfile.c: Use C++ exception handling. * top.c: Use C++ exception handling. * thread.c: Use C++ exception handling. * target.c: Use C++ exception handling. * symmisc.c: Use C++ exception handling. * symfile-mem.c: Use C++ exception handling. * stack.c: Use C++ exception handling. * sparc64-linux-tdep.c: Use C++ exception handling. * solib.c: Use C++ exception handling. * solib-svr4.c: Use C++ exception handling. * solib-spu.c: Use C++ exception handling. * solib-frv.c: Use C++ exception handling. * solib-dsbt.c: Use C++ exception handling. * selftest-arch.c: Use C++ exception handling. * s390-tdep.c: Use C++ exception handling. * rust-lang.c: Use C++ exception handling. * rust-exp.y: Use C++ exception handling. * rs6000-tdep.c: Use C++ exception handling. * rs6000-aix-tdep.c: Use C++ exception handling. * riscv-tdep.c: Use C++ exception handling. * remote.c: Use C++ exception handling. * remote-fileio.c: Use C++ exception handling. * record-full.c: Use C++ exception handling. * record-btrace.c: Use C++ exception handling. * python/python.c: Use C++ exception handling. * python/py-value.c: Use C++ exception handling. * python/py-utils.c: Use C++ exception handling. * python/py-unwind.c: Use C++ exception handling. * python/py-type.c: Use C++ exception handling. * python/py-symbol.c: Use C++ exception handling. * python/py-record.c: Use C++ exception handling. * python/py-record-btrace.c: Use C++ exception handling. * python/py-progspace.c: Use C++ exception handling. * python/py-prettyprint.c: Use C++ exception handling. * python/py-param.c: Use C++ exception handling. * python/py-objfile.c: Use C++ exception handling. * python/py-linetable.c: Use C++ exception handling. * python/py-lazy-string.c: Use C++ exception handling. * python/py-infthread.c: Use C++ exception handling. * python/py-inferior.c: Use C++ exception handling. * python/py-gdb-readline.c: Use C++ exception handling. * python/py-framefilter.c: Use C++ exception handling. * python/py-frame.c: Use C++ exception handling. * python/py-finishbreakpoint.c: Use C++ exception handling. * python/py-cmd.c: Use C++ exception handling. * python/py-breakpoint.c: Use C++ exception handling. * python/py-arch.c: Use C++ exception handling. * printcmd.c: Use C++ exception handling. * ppc-linux-tdep.c: Use C++ exception handling. * parse.c: Use C++ exception handling. * p-valprint.c: Use C++ exception handling. * objc-lang.c: Use C++ exception handling. * mi/mi-main.c: Use C++ exception handling. * mi/mi-interp.c: Use C++ exception handling. * mi/mi-cmd-stack.c: Use C++ exception handling. * mi/mi-cmd-break.c: Use C++ exception handling. * main.c: Use C++ exception handling. * linux-thread-db.c: Use C++ exception handling. * linux-tdep.c: Use C++ exception handling. * linux-nat.c: Use C++ exception handling. * linux-fork.c: Use C++ exception handling. * linespec.c: Use C++ exception handling. * language.c: Use C++ exception handling. * jit.c: Use C++ exception handling. * infrun.c: Use C++ exception handling. * infcmd.c: Use C++ exception handling. * infcall.c: Use C++ exception handling. * inf-loop.c: Use C++ exception handling. * i386-tdep.c: Use C++ exception handling. * i386-linux-tdep.c: Use C++ exception handling. * guile/scm-value.c: Use C++ exception handling. * guile/scm-type.c: Use C++ exception handling. * guile/scm-symtab.c: Use C++ exception handling. * guile/scm-symbol.c: Use C++ exception handling. * guile/scm-pretty-print.c: Use C++ exception handling. * guile/scm-ports.c: Use C++ exception handling. * guile/scm-param.c: Use C++ exception handling. * guile/scm-math.c: Use C++ exception handling. * guile/scm-lazy-string.c: Use C++ exception handling. * guile/scm-frame.c: Use C++ exception handling. * guile/scm-disasm.c: Use C++ exception handling. * guile/scm-cmd.c: Use C++ exception handling. * guile/scm-breakpoint.c: Use C++ exception handling. * guile/scm-block.c: Use C++ exception handling. * guile/guile-internal.h: Use C++ exception handling. * gnu-v3-abi.c: Use C++ exception handling. * gdbtypes.c: Use C++ exception handling. * frame.c: Use C++ exception handling. * frame-unwind.c: Use C++ exception handling. * fbsd-tdep.c: Use C++ exception handling. * f-valprint.c: Use C++ exception handling. * exec.c: Use C++ exception handling. * event-top.c: Use C++ exception handling. * event-loop.c: Use C++ exception handling. * eval.c: Use C++ exception handling. * dwarf2read.c: Use C++ exception handling. * dwarf2loc.c: Use C++ exception handling. * dwarf2-frame.c: Use C++ exception handling. * dwarf2-frame-tailcall.c: Use C++ exception handling. * dwarf-index-write.c: Use C++ exception handling. * dwarf-index-cache.c: Use C++ exception handling. * dtrace-probe.c: Use C++ exception handling. * disasm-selftests.c: Use C++ exception handling. * darwin-nat.c: Use C++ exception handling. * cp-valprint.c: Use C++ exception handling. * cp-support.c: Use C++ exception handling. * cp-abi.c: Use C++ exception handling. * corelow.c: Use C++ exception handling. * completer.c: Use C++ exception handling. * compile/compile-object-run.c: Use C++ exception handling. * compile/compile-object-load.c: Use C++ exception handling. * compile/compile-cplus-symbols.c: Use C++ exception handling. * compile/compile-c-symbols.c: Use C++ exception handling. * common/selftest.c: Use C++ exception handling. * common/new-op.c: Use C++ exception handling. * cli/cli-script.c: Use C++ exception handling. * cli/cli-interp.c: Use C++ exception handling. * cli/cli-cmds.c: Use C++ exception handling. * c-varobj.c: Use C++ exception handling. * btrace.c: Use C++ exception handling. * breakpoint.c: Use C++ exception handling. * break-catch-throw.c: Use C++ exception handling. * arch-utils.c: Use C++ exception handling. * amd64-tdep.c: Use C++ exception handling. * ada-valprint.c: Use C++ exception handling. * ada-typeprint.c: Use C++ exception handling. * ada-lang.c: Use C++ exception handling. * aarch64-tdep.c: Use C++ exception handling. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c: Use C++ exception handling. * linux-low.c: Use C++ exception handling. * gdbreplay.c: Use C++ exception handling.
2019-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.
2018-08-17Remove "repeat" argument from command_line_inputTom Tromey1-1/+1
After the previous patch, all callers pass 0 as the repeat argument to command_line_input. So, this patch removes it. gdb/ChangeLog 2018-08-16 Tom Tromey <tom@tromey.com> * top.c (read_command_file): Update. (command_line_input): Remove "repeat" argument. * ada-lang.c (get_selections): Update. * linespec.c (decode_line_2): Update. * defs.h (command_line_input): Remove argument. * cli/cli-script.c (read_next_line): Update. * python/py-gdb-readline.c: Update.
2018-01-02Update copyright year range in all GDB filesJoel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files
2017-11-22Fix build with GCC 8: strncpy ->strcpyYao Qi1-1/+1
Recent gcc 8 trunk emits the warning below, ../../binutils-gdb/gdb/python/py-gdb-readline.c:79:15: error: ‘char* strncpy(char*, const char*, size_t)’ output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] strncpy (q, p, n); ~~~~~~~~^~~~~~~~~ ../../binutils-gdb/gdb/python/py-gdb-readline.c:73:14: note: length computed here n = strlen (p); ~~~~~~~^~~ gdb: 2017-11-22 Yao Qi <yao.qi@linaro.org> * python/py-gdb-readline.c (gdbpy_readline_wrapper): Use strcpy.
2017-01-20Fix python-interactive with Python 3.6Simon Marchi1-2/+3
New in v2: - Define PyMem_RawMalloc as PyMem_Malloc for Python < 3.4 and use PyMem_RawMalloc in the code. Since Python 3.4, the callback installed in PyOS_ReadlineFunctionPointer should return a value allocated with PyMem_RawMalloc instead of PyMem_Malloc. The reason is that PyMem_Malloc must be called with the Python Global Interpreter Lock (GIL) held, which is not the case in the context where this function is called. PyMem_RawMalloc was introduced for cases like this. In Python 3.6, it looks like they added an assert to verify that PyMem_Malloc was not called without the GIL. The consequence is that typing anything in the python-interactive mode of gdb crashes the process. The same behavior was observed with the official package on Arch Linux as well as with a manual Python build on Ubuntu 14.04. This is what is shown with a debug build of Python 3.6 (the error with a non-debug build is far less clear): (gdb) pi >>> print(1) Fatal Python error: Python memory allocator called without holding the GIL Current thread 0x00007f1459af8780 (most recent call first): [1] 21326 abort ./gdb and the backtrace: #0 0x00007ffff618bc37 in raise () from /lib/x86_64-linux-gnu/libc.so.6 #1 0x00007ffff618f028 in abort () from /lib/x86_64-linux-gnu/libc.so.6 #2 0x00007ffff6b104d6 in Py_FatalError (msg=msg@entry=0x7ffff6ba15b8 "Python memory allocator called without holding the GIL") at Python/pylifecycle.c:1457 #3 0x00007ffff6a37a68 in _PyMem_DebugCheckGIL () at Objects/obmalloc.c:1972 #4 0x00007ffff6a3804e in _PyMem_DebugFree (ctx=0x7ffff6e65290 <_PyMem_Debug+48>, ptr=0x24f8830) at Objects/obmalloc.c:1994 #5 0x00007ffff6a38e1d in PyMem_Free (ptr=<optimized out>) at Objects/obmalloc.c:442 #6 0x00007ffff6b866c6 in _PyFaulthandler_Fini () at ./Modules/faulthandler.c:1369 #7 0x00007ffff6b104bd in Py_FatalError (msg=msg@entry=0x7ffff6ba15b8 "Python memory allocator called without holding the GIL") at Python/pylifecycle.c:1431 #8 0x00007ffff6a37a68 in _PyMem_DebugCheckGIL () at Objects/obmalloc.c:1972 #9 0x00007ffff6a37aa3 in _PyMem_DebugMalloc (ctx=0x7ffff6e65290 <_PyMem_Debug+48>, nbytes=5) at Objects/obmalloc.c:1980 #10 0x00007ffff6a38d91 in PyMem_Malloc (size=<optimized out>) at Objects/obmalloc.c:418 #11 0x000000000064dbe2 in gdbpy_readline_wrapper (sys_stdin=0x7ffff6514640 <_IO_2_1_stdin_>, sys_stdout=0x7ffff6514400 <_IO_2_1_stdout_>, prompt=0x7ffff4d4f7d0 ">>> ") at /home/emaisin/src/binutils-gdb/gdb/python/py-gdb-readline.c:75 The documentation is very clear about it [1] and it was also mentioned in the "What's New In Python 3.4" page [2]. [1] https://docs.python.org/3/c-api/veryhigh.html#c.PyOS_ReadlineFunctionPointer [2] https://docs.python.org/3/whatsnew/3.4.html#changes-in-the-c-api gdb/ChangeLog: * python/python-internal.h (PyMem_RawMalloc): Define for Python < 3.4. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Use PyMem_RawMalloc instead of PyMem_Malloc.
2017-01-01update copyright year range in GDB filesJoel Brobecker1-1/+1
This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.
2016-01-01GDB copyright headers update after running GDB's copyright.py script.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2015-09-25Add casts to memory allocation related callsSimon Marchi1-2/+2
Most allocation functions (if not all) return a void* pointing to the allocated memory. In C++, we need to add an explicit cast when assigning the result to a pointer to another type (which is the case more often than not). The content of this patch is taken from Pedro's branch, from commit "(mostly) auto-generated patch to insert casts needed for C++". I validated that the changes make sense and manually reflowed the code to make it respect the coding style. I also found multiple places where I could use XNEW/XNEWVEC/XRESIZEVEC/etc. Thanks a lot to whoever did that automated script to insert casts, doing it completely by hand would have taken a ridiculous amount of time. Only files built on x86 with --enable-targets=all are modified. This means that all other -nat.c files are untouched and will have to be dealt with later by using appropiate compilers. Or maybe we can try to build them with a regular g++ just to know where to add casts, I don't know. I built-tested this with --enable-targets=all and reg-tested. Here's the changelog entry, which was not too bad to make despite the size, thanks to David Malcom's script. I fixed some bits by hand, but there might be some wrong parts left (hopefully not). gdb/ChangeLog: * aarch64-linux-tdep.c (aarch64_stap_parse_special_token): Add cast to allocation result assignment. * ada-exp.y (write_object_renaming): Likewise. (write_ambiguous_var): Likewise. (ada_nget_field_index): Likewise. (write_var_or_type): Likewise. * ada-lang.c (ada_decode_symbol): Likewise. (ada_value_assign): Likewise. (value_pointer): Likewise. (cache_symbol): Likewise. (add_nonlocal_symbols): Likewise. (ada_name_for_lookup): Likewise. (symbol_completion_add): Likewise. (ada_to_fixed_type_1): Likewise. (ada_get_next_arg): Likewise. (defns_collected): Likewise. * ada-lex.l (processId): Likewise. (processString): Likewise. * ada-tasks.c (read_known_tasks_array): Likewise. (read_known_tasks_list): Likewise. * ada-typeprint.c (decoded_type_name): Likewise. * addrmap.c (addrmap_mutable_create_fixed): Likewise. * amd64-tdep.c (amd64_push_arguments): Likewise. (amd64_displaced_step_copy_insn): Likewise. (amd64_classify_insn_at): Likewise. (amd64_relocate_instruction): Likewise. * amd64obsd-tdep.c (amd64obsd_sigtramp_p): Likewise. * arch-utils.c (simple_displaced_step_copy_insn): Likewise. (initialize_current_architecture): Likewise. * arm-linux-tdep.c (arm_stap_parse_special_token): Likewise. * arm-symbian-tdep.c (arm_symbian_osabi_sniffer): Likewise. * arm-tdep.c (arm_exidx_new_objfile): Likewise. (arm_push_dummy_call): Likewise. (extend_buffer_earlier): Likewise. (arm_adjust_breakpoint_address): Likewise. (arm_skip_stub): Likewise. * auto-load.c (filename_is_in_pattern): Likewise. (maybe_add_script_file): Likewise. (maybe_add_script_text): Likewise. (auto_load_objfile_script_1): Likewise. * auxv.c (ld_so_xfer_auxv): Likewise. * ax-general.c (new_agent_expr): Likewise. (grow_expr): Likewise. (ax_reg_mask): Likewise. * bcache.c (bcache_full): Likewise. * breakpoint.c (program_breakpoint_here_p): Likewise. * btrace.c (parse_xml_raw): Likewise. * build-id.c (build_id_to_debug_bfd): Likewise. * buildsym.c (end_symtab_with_blockvector): Likewise. * c-exp.y (string_exp): Likewise. (qualified_name): Likewise. (write_destructor_name): Likewise. (operator_stoken): Likewise. (parse_number): Likewise. (scan_macro_expansion): Likewise. (yylex): Likewise. (c_print_token): Likewise. * c-lang.c (c_get_string): Likewise. (emit_numeric_character): Likewise. * charset.c (wchar_iterate): Likewise. * cli/cli-cmds.c (complete_command): Likewise. (make_command): Likewise. * cli/cli-dump.c (restore_section_callback): Likewise. (restore_binary_file): Likewise. * cli/cli-interp.c (cli_interpreter_exec): Likewise. * cli/cli-script.c (execute_control_command): Likewise. * cli/cli-setshow.c (do_set_command): Likewise. * coff-pe-read.c (add_pe_forwarded_sym): Likewise. (read_pe_exported_syms): Likewise. * coffread.c (coff_read_struct_type): Likewise. (coff_read_enum_type): Likewise. * common/btrace-common.c (btrace_data_append): Likewise. * common/buffer.c (buffer_grow): Likewise. * common/filestuff.c (gdb_fopen_cloexec): Likewise. * common/format.c (parse_format_string): Likewise. * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): Likewise. * common/xml-utils.c (xml_escape_text): Likewise. * compile/compile-object-load.c (copy_sections): Likewise. (compile_object_load): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * completer.c (filename_completer): Likewise. * corefile.c (read_memory_typed_address): Likewise. (write_memory_unsigned_integer): Likewise. (write_memory_signed_integer): Likewise. (complete_set_gnutarget): Likewise. * corelow.c (get_core_register_section): Likewise. * cp-name-parser.y (d_grab): Likewise. (allocate_info): Likewise. (cp_new_demangle_parse_info): Likewise. * cp-namespace.c (cp_scan_for_anonymous_namespaces): Likewise. (cp_lookup_symbol_in_namespace): Likewise. (lookup_namespace_scope): Likewise. (find_symbol_in_baseclass): Likewise. (cp_lookup_nested_symbol): Likewise. (cp_lookup_transparent_type_loop): Likewise. * cp-support.c (copy_string_to_obstack): Likewise. (make_symbol_overload_list): Likewise. (make_symbol_overload_list_namespace): Likewise. (make_symbol_overload_list_adl_namespace): Likewise. (first_component_command): Likewise. * cp-valprint.c (cp_print_value): Likewise. * ctf.c (ctf_xfer_partial): Likewise. * d-exp.y (StringExp): Likewise. * d-namespace.c (d_lookup_symbol_in_module): Likewise. (lookup_module_scope): Likewise. (find_symbol_in_baseclass): Likewise. (d_lookup_nested_symbol): Likewise. * dbxread.c (find_stab_function_addr): Likewise. (read_dbx_symtab): Likewise. (dbx_end_psymtab): Likewise. (cp_set_block_scope): Likewise. * dcache.c (dcache_alloc): Likewise. * demangle.c (_initialize_demangler): Likewise. * dicos-tdep.c (dicos_load_module_p): Likewise. * dictionary.c (dict_create_hashed_expandable): Likewise. (dict_create_linear_expandable): Likewise. (expand_hashtable): Likewise. (add_symbol_linear_expandable): Likewise. * dwarf2-frame.c (add_cie): Likewise. (add_fde): Likewise. (dwarf2_build_frame_info): Likewise. * dwarf2expr.c (dwarf_expr_grow_stack): Likewise. (dwarf_expr_fetch_address): Likewise. (add_piece): Likewise. (execute_stack_op): Likewise. * dwarf2loc.c (chain_candidate): Likewise. (dwarf_entry_parameter_to_value): Likewise. (read_pieced_value): Likewise. (write_pieced_value): Likewise. * dwarf2read.c (dwarf2_read_section): Likewise. (add_type_unit): Likewise. (read_comp_units_from_section): Likewise. (fixup_go_packaging): Likewise. (dwarf2_compute_name): Likewise. (dwarf2_physname): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (read_func_scope): Likewise. (read_call_site_scope): Likewise. (dwarf2_attach_fields_to_type): Likewise. (process_structure_scope): Likewise. (mark_common_block_symbol_computed): Likewise. (read_common_block): Likewise. (abbrev_table_read_table): Likewise. (guess_partial_die_structure_name): Likewise. (fixup_partial_die): Likewise. (add_file_name): Likewise. (dwarf2_const_value_data): Likewise. (dwarf2_const_value_attr): Likewise. (build_error_marker_type): Likewise. (guess_full_die_structure_name): Likewise. (anonymous_struct_prefix): Likewise. (typename_concat): Likewise. (dwarf2_canonicalize_name): Likewise. (dwarf2_name): Likewise. (write_constant_as_bytes): Likewise. (dwarf2_fetch_constant_bytes): Likewise. (copy_string): Likewise. (parse_macro_definition): Likewise. * elfread.c (elf_symfile_segments): Likewise. (elf_rel_plt_read): Likewise. (elf_gnu_ifunc_resolve_by_cache): Likewise. (elf_gnu_ifunc_resolve_by_got): Likewise. (elf_read_minimal_symbols): Likewise. (elf_gnu_ifunc_record_cache): Likewise. * event-top.c (top_level_prompt): Likewise. (command_line_handler): Likewise. * exec.c (resize_section_table): Likewise. * expprint.c (print_subexp_standard): Likewise. * fbsd-tdep.c (fbsd_collect_regset_section_cb): Likewise. * findcmd.c (parse_find_args): Likewise. * findvar.c (address_from_register): Likewise. * frame.c (get_prev_frame_always): Likewise. * gdb_bfd.c (gdb_bfd_ref): Likewise. (get_section_descriptor): Likewise. * gdb_obstack.c (obconcat): Likewise. (obstack_strdup): Likewise. * gdbtypes.c (lookup_function_type_with_arguments): Likewise. (create_set_type): Likewise. (lookup_unsigned_typename): Likewise. (lookup_signed_typename): Likewise. (resolve_dynamic_union): Likewise. (resolve_dynamic_struct): Likewise. (add_dyn_prop): Likewise. (copy_dynamic_prop_list): Likewise. (arch_flags_type): Likewise. (append_composite_type_field_raw): Likewise. * gdbtypes.h (INIT_FUNC_SPECIFIC): Likewise. * gnu-v3-abi.c (gnuv3_rtti_type): Likewise. * go-exp.y (string_exp): Likewise. * go-lang.c (go_demangle): Likewise. * guile/guile.c (compute_scheme_string): Likewise. * guile/scm-cmd.c (gdbscm_parse_command_name): Likewise. (gdbscm_canonicalize_command_name): Likewise. * guile/scm-ports.c (ioscm_init_stdio_buffers): Likewise. (ioscm_init_memory_port): Likewise. (ioscm_reinit_memory_port): Likewise. * guile/scm-utils.c (gdbscm_gc_xstrdup): Likewise. (gdbscm_gc_dup_argv): Likewise. * h8300-tdep.c (h8300_push_dummy_call): Likewise. * hppa-tdep.c (internalize_unwinds): Likewise. (read_unwind_info): Likewise. * i386-cygwin-tdep.c (core_process_module_section): Likewise. (windows_core_xfer_shared_libraries): Likewise. * i386-tdep.c (i386_displaced_step_copy_insn): Likewise. (i386_stap_parse_special_token_triplet): Likewise. (i386_stap_parse_special_token_three_arg_disp): Likewise. * i386obsd-tdep.c (i386obsd_sigtramp_p): Likewise. * inf-child.c (inf_child_fileio_readlink): Likewise. * inf-ptrace.c (inf_ptrace_fetch_register): Likewise. (inf_ptrace_store_register): Likewise. * infrun.c (follow_exec): Likewise. (displaced_step_prepare_throw): Likewise. (save_stop_context): Likewise. (save_infcall_suspend_state): Likewise. * jit.c (jit_read_descriptor): Likewise. (jit_read_code_entry): Likewise. (jit_symtab_line_mapping_add_impl): Likewise. (finalize_symtab): Likewise. (jit_unwind_reg_get_impl): Likewise. * jv-exp.y (QualifiedName): Likewise. * jv-lang.c (get_java_utf8_name): Likewise. (type_from_class): Likewise. (java_demangle_type_signature): Likewise. (java_class_name_from_physname): Likewise. * jv-typeprint.c (java_type_print_base): Likewise. * jv-valprint.c (java_value_print): Likewise. * language.c (add_language): Likewise. * linespec.c (add_sal_to_sals_basic): Likewise. (add_sal_to_sals): Likewise. (decode_objc): Likewise. (find_linespec_symbols): Likewise. * linux-fork.c (fork_save_infrun_state): Likewise. * linux-nat.c (linux_nat_detach): Likewise. (linux_nat_fileio_readlink): Likewise. * linux-record.c (record_linux_sockaddr): Likewise. (record_linux_msghdr): Likewise. (Do): Likewise. * linux-tdep.c (linux_core_info_proc_mappings): Likewise. (linux_collect_regset_section_cb): Likewise. (linux_get_siginfo_data): Likewise. * linux-thread-db.c (try_thread_db_load_from_pdir_1): Likewise. (try_thread_db_load_from_dir): Likewise. (thread_db_load_search): Likewise. (info_auto_load_libthread_db): Likewise. * m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise. (m32c_m16c_pointer_to_address): Likewise. * m68hc11-tdep.c (m68hc11_pseudo_register_write): Likewise. * m68k-tdep.c (m68k_get_longjmp_target): Likewise. * machoread.c (macho_check_dsym): Likewise. * macroexp.c (resize_buffer): Likewise. (gather_arguments): Likewise. (maybe_expand): Likewise. * macrotab.c (new_macro_key): Likewise. (new_source_file): Likewise. (new_macro_definition): Likewise. * mdebugread.c (parse_symbol): Likewise. (parse_type): Likewise. (parse_partial_symbols): Likewise. (psymtab_to_symtab_1): Likewise. * mem-break.c (default_memory_insert_breakpoint): Likewise. * mi/mi-cmd-break.c (mi_argv_to_format): Likewise. * mi/mi-main.c (mi_cmd_data_read_memory): Likewise. (mi_cmd_data_read_memory_bytes): Likewise. (mi_cmd_data_write_memory_bytes): Likewise. (mi_cmd_trace_frame_collected): Likewise. * mi/mi-parse.c (mi_parse_argv): Likewise. (mi_parse): Likewise. * minidebug.c (lzma_open): Likewise. (lzma_pread): Likewise. * mips-tdep.c (mips_read_fp_register_single): Likewise. (mips_print_fp_register): Likewise. * mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Likewise. * mipsread.c (read_alphacoff_dynamic_symtab): Likewise. * mt-tdep.c (mt_register_name): Likewise. (mt_registers_info): Likewise. (mt_push_dummy_call): Likewise. * namespace.c (add_using_directive): Likewise. * nat/linux-btrace.c (perf_event_read): Likewise. (linux_enable_bts): Likewise. * nat/linux-osdata.c (linux_common_core_of_thread): Likewise. * nat/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Likewise. * nto-tdep.c (nto_find_and_open_solib): Likewise. (nto_parse_redirection): Likewise. * objc-lang.c (objc_demangle): Likewise. (find_methods): Likewise. * objfiles.c (get_objfile_bfd_data): Likewise. (set_objfile_main_name): Likewise. (allocate_objfile): Likewise. (objfile_relocate): Likewise. (update_section_map): Likewise. * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Likewise. * p-exp.y (exp): Likewise. (yylex): Likewise. * p-valprint.c (pascal_object_print_value): Likewise. * parse.c (initialize_expout): Likewise. (mark_completion_tag): Likewise. (copy_name): Likewise. (parse_float): Likewise. (type_stack_reserve): Likewise. * ppc-linux-tdep.c (ppc_stap_parse_special_token): Likewise. (ppu2spu_prev_register): Likewise. * ppc-ravenscar-thread.c (supply_register_at_address): Likewise. * printcmd.c (printf_wide_c_string): Likewise. (printf_pointer): Likewise. * probe.c (parse_probes): Likewise. * python/py-cmd.c (gdbpy_parse_command_name): Likewise. (cmdpy_init): Likewise. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Likewise. * python/py-symtab.c (set_sal): Likewise. * python/py-unwind.c (pyuw_sniffer): Likewise. * python/python.c (python_interactive_command): Likewise. (compute_python_string): Likewise. * ravenscar-thread.c (get_running_thread_id): Likewise. * record-full.c (record_full_exec_insn): Likewise. (record_full_core_open_1): Likewise. * regcache.c (regcache_raw_read_signed): Likewise. (regcache_raw_read_unsigned): Likewise. (regcache_cooked_read_signed): Likewise. (regcache_cooked_read_unsigned): Likewise. * remote-fileio.c (remote_fileio_func_open): Likewise. (remote_fileio_func_rename): Likewise. (remote_fileio_func_unlink): Likewise. (remote_fileio_func_stat): Likewise. (remote_fileio_func_system): Likewise. * remote-mips.c (mips_xfer_memory): Likewise. (mips_load_srec): Likewise. (pmon_end_download): Likewise. * remote.c (new_remote_state): Likewise. (map_regcache_remote_table): Likewise. (remote_register_number_and_offset): Likewise. (init_remote_state): Likewise. (get_memory_packet_size): Likewise. (remote_pass_signals): Likewise. (remote_program_signals): Likewise. (remote_start_remote): Likewise. (remote_check_symbols): Likewise. (remote_query_supported): Likewise. (extended_remote_attach): Likewise. (process_g_packet): Likewise. (store_registers_using_G): Likewise. (putpkt_binary): Likewise. (read_frame): Likewise. (compare_sections_command): Likewise. (remote_hostio_pread): Likewise. (remote_hostio_readlink): Likewise. (remote_file_put): Likewise. (remote_file_get): Likewise. (remote_pid_to_exec_file): Likewise. (_initialize_remote): Likewise. * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise. (rs6000_aix_core_xfer_shared_libraries_aix): Likewise. * rs6000-tdep.c (ppc_displaced_step_copy_insn): Likewise. (bfd_uses_spe_extensions): Likewise. * s390-linux-tdep.c (s390_displaced_step_copy_insn): Likewise. * score-tdep.c (score7_malloc_and_get_memblock): Likewise. * solib-dsbt.c (decode_loadmap): Likewise. (fetch_loadmap): Likewise. (scan_dyntag): Likewise. (enable_break): Likewise. (dsbt_relocate_main_executable): Likewise. * solib-frv.c (fetch_loadmap): Likewise. (enable_break2): Likewise. (frv_relocate_main_executable): Likewise. * solib-spu.c (spu_relocate_main_executable): Likewise. (spu_bfd_open): Likewise. * solib-svr4.c (lm_info_read): Likewise. (read_program_header): Likewise. (find_program_interpreter): Likewise. (scan_dyntag): Likewise. (elf_locate_base): Likewise. (open_symbol_file_object): Likewise. (read_program_headers_from_bfd): Likewise. (svr4_relocate_main_executable): Likewise. * solib-target.c (solib_target_relocate_section_addresses): Likewise. * solib.c (solib_find_1): Likewise. (exec_file_find): Likewise. (solib_find): Likewise. * source.c (openp): Likewise. (print_source_lines_base): Likewise. (forward_search_command): Likewise. * sparc-ravenscar-thread.c (supply_register_at_address): Likewise. * spu-tdep.c (spu2ppu_prev_register): Likewise. (spu_get_overlay_table): Likewise. * stabsread.c (patch_block_stabs): Likewise. (define_symbol): Likewise. (again:): Likewise. (read_member_functions): Likewise. (read_one_struct_field): Likewise. (read_enum_type): Likewise. (common_block_start): Likewise. * stack.c (read_frame_arg): Likewise. (backtrace_command): Likewise. * stap-probe.c (stap_parse_register_operand): Likewise. * symfile.c (syms_from_objfile_1): Likewise. (find_separate_debug_file): Likewise. (load_command): Likewise. (load_progress): Likewise. (load_section_callback): Likewise. (reread_symbols): Likewise. (add_filename_language): Likewise. (allocate_compunit_symtab): Likewise. (read_target_long_array): Likewise. (simple_read_overlay_table): Likewise. * symtab.c (symbol_set_names): Likewise. (resize_symbol_cache): Likewise. (rbreak_command): Likewise. (completion_list_add_name): Likewise. (completion_list_objc_symbol): Likewise. (add_filename_to_list): Likewise. * target-descriptions.c (maint_print_c_tdesc_cmd): Likewise. * target-memory.c (target_write_memory_blocks): Likewise. * target.c (target_read_string): Likewise. (read_whatever_is_readable): Likewise. (target_read_alloc_1): Likewise. (simple_search_memory): Likewise. (target_fileio_read_alloc_1): Likewise. * tilegx-tdep.c (tilegx_push_dummy_call): Likewise. * top.c (command_line_input): Likewise. * tracefile-tfile.c (tfile_fetch_registers): Likewise. * tracefile.c (tracefile_fetch_registers): Likewise. * tracepoint.c (add_memrange): Likewise. (init_collection_list): Likewise. (add_aexpr): Likewise. (trace_dump_actions): Likewise. (parse_trace_status): Likewise. (parse_tracepoint_definition): Likewise. (parse_tsv_definition): Likewise. (parse_static_tracepoint_marker_definition): Likewise. * tui/tui-file.c (tui_sfileopen): Likewise. (tui_file_adjust_strbuf): Likewise. * tui/tui-io.c (tui_expand_tabs): Likewise. * tui/tui-source.c (tui_set_source_content): Likewise. * typeprint.c (find_global_typedef): Likewise. * ui-file.c (do_ui_file_xstrdup): Likewise. (ui_file_obsavestring): Likewise. (mem_file_write): Likewise. * utils.c (make_hex_string): Likewise. (get_regcomp_error): Likewise. (puts_filtered_tabular): Likewise. (gdb_realpath_keepfile): Likewise. (ldirname): Likewise. (gdb_bfd_errmsg): Likewise. (substitute_path_component): Likewise. * valops.c (search_struct_method): Likewise. (find_oload_champ_namespace_loop): Likewise. * valprint.c (print_decimal_chars): Likewise. (read_string): Likewise. (generic_emit_char): Likewise. * varobj.c (varobj_delete): Likewise. (varobj_value_get_print_value): Likewise. * vaxobsd-tdep.c (vaxobsd_sigtramp_sniffer): Likewise. * windows-tdep.c (display_one_tib): Likewise. * xcoffread.c (read_xcoff_symtab): Likewise. (process_xcoff_symbol): Likewise. (swap_sym): Likewise. (scan_xcoff_symtab): Likewise. (xcoff_initial_scan): Likewise. * xml-support.c (gdb_xml_end_element): Likewise. (xml_process_xincludes): Likewise. (xml_fetch_content_from_file): Likewise. * xml-syscall.c (xml_list_of_syscalls): Likewise. * xstormy16-tdep.c (xstormy16_push_dummy_call): Likewise. gdb/gdbserver/ChangeLog: * ax.c (gdb_parse_agent_expr): Add cast to allocation result assignment. (gdb_unparse_agent_expr): Likewise. * hostio.c (require_data): Likewise. (handle_pread): Likewise. * linux-low.c (disable_regset): Likewise. (fetch_register): Likewise. (store_register): Likewise. (get_dynamic): Likewise. (linux_qxfer_libraries_svr4): Likewise. * mem-break.c (delete_fast_tracepoint_jump): Likewise. (set_fast_tracepoint_jump): Likewise. (uninsert_fast_tracepoint_jumps_at): Likewise. (reinsert_fast_tracepoint_jumps_at): Likewise. (validate_inserted_breakpoint): Likewise. (clone_agent_expr): Likewise. * regcache.c (init_register_cache): Likewise. * remote-utils.c (putpkt_binary_1): Likewise. (decode_M_packet): Likewise. (decode_X_packet): Likewise. (look_up_one_symbol): Likewise. (relocate_instruction): Likewise. (monitor_output): Likewise. * server.c (handle_search_memory): Likewise. (handle_qxfer_exec_file): Likewise. (handle_qxfer_libraries): Likewise. (handle_qxfer): Likewise. (handle_query): Likewise. (handle_v_cont): Likewise. (handle_v_run): Likewise. (captured_main): Likewise. * target.c (write_inferior_memory): Likewise. * thread-db.c (try_thread_db_load_from_dir): Likewise. * tracepoint.c (init_trace_buffer): Likewise. (add_tracepoint_action): Likewise. (add_traceframe): Likewise. (add_traceframe_block): Likewise. (cmd_qtdpsrc): Likewise. (cmd_qtdv): Likewise. (cmd_qtstatus): Likewise. (response_source): Likewise. (response_tsv): Likewise. (cmd_qtnotes): Likewise. (gdb_collect): Likewise. (initialize_tracepoint): Likewise.
2015-03-07Split TRY_CATCH into TRY + CATCHPedro Alves1-9/+10
This patch splits the TRY_CATCH macro into three, so that we go from this: ~~~ volatile gdb_exception ex; TRY_CATCH (ex, RETURN_MASK_ERROR) { } if (ex.reason < 0) { } ~~~ to this: ~~~ TRY { } CATCH (ex, RETURN_MASK_ERROR) { } END_CATCH ~~~ Thus, we'll be getting rid of the local volatile exception object, and declaring the caught exception in the catch block. This allows reimplementing TRY/CATCH in terms of C++ exceptions when building in C++ mode, while still allowing to build GDB in C mode (using setjmp/longjmp), as a transition step. TBC, after this patch, is it _not_ valid to have code between the TRY and the CATCH blocks, like: TRY { } // some code here. CATCH (ex, RETURN_MASK_ERROR) { } END_CATCH Just like it isn't valid to do that with C++'s native try/catch. By switching to creating the exception object inside the CATCH block scope, we can get rid of all the explicitly allocated volatile exception objects all over the tree, and map the CATCH block more directly to C++'s catch blocks. The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was done with a script, rerun from scratch at every rebase, no manual editing involved. After the mechanical conversion, a few places needed manual intervention, to fix preexisting cases where we were using the exception object outside of the TRY_CATCH block, and cases where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH after this patch]. The result was folded into this patch so that GDB still builds at each incremental step. END_CATCH is necessary for two reasons: First, because we name the exception object in the CATCH block, which requires creating a scope, which in turn must be closed somewhere. Declaring the exception variable in the initializer field of a for block, like: #define CATCH(EXCEPTION, mask) \ for (struct gdb_exception EXCEPTION; \ exceptions_state_mc_catch (&EXCEPTION, MASK); \ EXCEPTION = exception_none) would avoid needing END_CATCH, but alas, in C mode, we build with C90, which doesn't allow mixed declarations and code. Second, because when TRY/CATCH are wired to real C++ try/catch, as long as we need to handle cleanup chains, even if there's no CATCH block that wants to catch the exception, we need for stop at every frame in the unwind chain and run cleanups, then rethrow. That will be done in END_CATCH. After we require C++, we'll still need TRY/CATCH/END_CATCH until cleanups are completely phased out -- TRY/CATCH in C++ mode will save/restore the current cleanup chain, like in C mode, and END_CATCH catches otherwise uncaugh exceptions, runs cleanups and rethrows, so that C++ cleanups and exceptions can coexist. IMO, this still makes the TRY/CATCH code look a bit more like a newcomer would expect, so IMO worth it even if we weren't considering C++. gdb/ChangeLog. 2015-03-07 Pedro Alves <palves@redhat.com> * common/common-exceptions.c (struct catcher) <exception>: No longer a pointer to volatile exception. Now an exception value. <mask>: Delete field. (exceptions_state_mc_init): Remove all parameters. Adjust. (exceptions_state_mc): No longer pop the catcher here. (exceptions_state_mc_catch): New function. (throw_exception): Adjust. * common/common-exceptions.h (exceptions_state_mc_init): Remove all parameters. (exceptions_state_mc_catch): Declare. (TRY_CATCH): Rename to ... (TRY): ... this. Remove EXCEPTION and MASK parameters. (CATCH, END_CATCH): New. All callers adjusted. gdb/gdbserver/ChangeLog: 2015-03-07 Pedro Alves <palves@redhat.com> Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH instead.
2015-01-01Update year range in copyright notice of all files owned by the GDB project.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2014-12-15Fix build with Python 3.4 (PR python/16784)Simon Marchi1-0/+4
The type of the function pointer PyOS_ReadlineFunctionPointer (part of the Python C API), which we use, slightly changed starting with Python 3.4. The signature went from PyAPI_DATA(char) *(*PyOS_ReadlineFunctionPointer)(FILE *, FILE *, char *); to PyAPI_DATA(char) *(*PyOS_ReadlineFunctionPointer)(FILE *, FILE *, const char *); The parameter that changed is the prompt text. This commits adjust gdb accordingly by making the prompt_arg parameter const, as well as the fallouts of that. I needed to rework how annotations are added to the prompt, since the it is now const. If annotations are enabled, it will make a copy of the prompt overwrite the prompt variable that is used throughout the function. Otherwise, no copy is done and the original prompt_arg value is passed. I changed the signature of deprecated_readline_hook. I would've changed any user of it, but it seems like nothing is using it, Built-tested with python 2.7.x, 3.3.y and 3.4.z. gdb/ChangeLog: * defs.h (gdb_readline): Constify argument. (gdb_readline_wrapper): Same. (command_line_input): Same. (deprecated_readline_hook): Same. * top.c (deprecated_readline_hook): Same. (gdb_readline): Same. (gdb_readline_wrapper): Same. (command_line_input): Constify argument. Pass prompt to called functions instead of local_prompt, overwriting prompt if using annotations. * event-top.h (display_gdb_prompt): Constify argument. * event-top.c (display_gdb_prompt): Same. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Constify argument if building with Python 3.4 and up. Signed-off-by: Simon Marchi <simon.marchi@ericsson.com>
2014-10-08Remove spurious exceptions.h inclusionsGary Benson1-1/+0
defs.h includes utils.h, and utils.h includes exceptions.h. All GDB .c files include defs.h as their first line, so no file other than utils.h needs to include exceptions.h. This commit removes all such inclusions. gdb/ChangeLog: * ada-lang.c: Do not include exceptions.h. * ada-valprint.c: Likewise. * amd64-tdep.c: Likewise. * auto-load.c: Likewise. * block.c: Likewise. * break-catch-throw.c: Likewise. * breakpoint.c: Likewise. * btrace.c: Likewise. * c-lang.c: Likewise. * cli/cli-cmds.c: Likewise. * cli/cli-interp.c: Likewise. * cli/cli-script.c: Likewise. * completer.c: Likewise. * corefile.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-support.c: Likewise. * cp-valprint.c: Likewise. * darwin-nat.c: Likewise. * dwarf2-frame-tailcall.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * event-top.c: Likewise. * f-valprint.c: Likewise. * frame-unwind.c: Likewise. * frame.c: Likewise. * gdbtypes.c: Likewise. * gnu-v2-abi.c: Likewise. * gnu-v3-abi.c: Likewise. * guile/scm-auto-load.c: Likewise. * guile/scm-breakpoint.c: Likewise. * guile/scm-cmd.c: Likewise. * guile/scm-frame.c: Likewise. * guile/scm-lazy-string.c: Likewise. * guile/scm-param.c: Likewise. * guile/scm-symbol.c: Likewise. * guile/scm-type.c: Likewise. * hppa-hpux-tdep.c: Likewise. * i386-tdep.c: Likewise. * inf-loop.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * infrun.c: Likewise. * interps.c: Likewise. * interps.h: Likewise. * jit.c: Likewise. * linespec.c: Likewise. * linux-nat.c: Likewise. * linux-thread-db.c: Likewise. * m32r-rom.c: Likewise. * main.c: Likewise. * memory-map.c: Likewise. * mi/mi-cmd-break.c: Likewise. * mi/mi-cmd-stack.c: Likewise. * mi/mi-interp.c: Likewise. * mi/mi-main.c: Likewise. * monitor.c: Likewise. * nto-procfs.c: Likewise. * objc-lang.c: Likewise. * p-valprint.c: Likewise. * parse.c: Likewise. * ppc-linux-tdep.c: Likewise. * printcmd.c: Likewise. * probe.c: Likewise. * python/py-auto-load.c: Likewise. * python/py-breakpoint.c: Likewise. * python/py-cmd.c: Likewise. * python/py-finishbreakpoint.c: Likewise. * python/py-frame.c: Likewise. * python/py-framefilter.c: Likewise. * python/py-function.c: Likewise. * python/py-gdb-readline.c: Likewise. * python/py-inferior.c: Likewise. * python/py-infthread.c: Likewise. * python/py-lazy-string.c: Likewise. * python/py-linetable.c: Likewise. * python/py-param.c: Likewise. * python/py-prettyprint.c: Likewise. * python/py-symbol.c: Likewise. * python/py-type.c: Likewise. * python/py-value.c: Likewise. * python/python-internal.h: Likewise. * python/python.c: Likewise. * record-btrace.c: Likewise. * record-full.c: Likewise. * regcache.c: Likewise. * remote-fileio.c: Likewise. * remote-mips.c: Likewise. * remote.c: Likewise. * rs6000-aix-tdep.c: Likewise. * rs6000-nat.c: Likewise. * skip.c: Likewise. * solib-darwin.c: Likewise. * solib-dsbt.c: Likewise. * solib-frv.c: Likewise. * solib-ia64-hpux.c: Likewise. * solib-spu.c: Likewise. * solib-svr4.c: Likewise. * solib.c: Likewise. * spu-tdep.c: Likewise. * stack.c: Likewise. * stap-probe.c: Likewise. * symfile-mem.c: Likewise. * symmisc.c: Likewise. * target.c: Likewise. * thread.c: Likewise. * top.c: Likewise. * tracepoint.c: Likewise. * tui/tui-interp.c: Likewise. * typeprint.c: Likewise. * utils.c: Likewise. * valarith.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * windows-nat.c: Likewise. * xml-support.c: Likewise.
2014-08-07Include string.h in common-defs.hGary Benson1-2/+0
This commit includes string.h in common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include string.h. * aarch64-tdep.c: Do not include string.h. * ada-exp.y: Likewise. * ada-lang.c: Likewise. * ada-lex.l: Likewise. * ada-typeprint.c: Likewise. * ada-valprint.c: Likewise. * aix-thread.c: Likewise. * alpha-linux-tdep.c: Likewise. * alpha-mdebug-tdep.c: Likewise. * alpha-nat.c: Likewise. * alpha-osf1-tdep.c: Likewise. * alpha-tdep.c: Likewise. * alphanbsd-tdep.c: Likewise. * amd64-dicos-tdep.c: Likewise. * amd64-linux-tdep.c: Likewise. * amd64-nat.c: Likewise. * amd64-sol2-tdep.c: Likewise. * amd64fbsd-tdep.c: Likewise. * amd64obsd-tdep.c: Likewise. * arch-utils.c: Likewise. * arm-linux-nat.c: Likewise. * arm-linux-tdep.c: Likewise. * arm-tdep.c: Likewise. * arm-wince-tdep.c: Likewise. * armbsd-tdep.c: Likewise. * armnbsd-nat.c: Likewise. * armnbsd-tdep.c: Likewise. * armobsd-tdep.c: Likewise. * avr-tdep.c: Likewise. * ax-gdb.c: Likewise. * ax-general.c: Likewise. * bcache.c: Likewise. * bfin-tdep.c: Likewise. * breakpoint.c: Likewise. * build-id.c: Likewise. * buildsym.c: Likewise. * c-exp.y: Likewise. * c-lang.c: Likewise. * c-typeprint.c: Likewise. * c-valprint.c: Likewise. * charset.c: Likewise. * cli-out.c: Likewise. * cli/cli-cmds.c: Likewise. * cli/cli-decode.c: Likewise. * cli/cli-dump.c: Likewise. * cli/cli-interp.c: Likewise. * cli/cli-logging.c: Likewise. * cli/cli-script.c: Likewise. * cli/cli-setshow.c: Likewise. * cli/cli-utils.c: Likewise. * coffread.c: Likewise. * common/agent.c: Likewise. * common/buffer.c: Likewise. * common/buffer.h: Likewise. * common/common-utils.c: Likewise. * common/filestuff.c: Likewise. * common/filestuff.c: Likewise. * common/format.c: Likewise. * common/print-utils.c: Likewise. * common/rsp-low.c: Likewise. * common/signals.c: Likewise. * common/vec.h: Likewise. * common/xml-utils.c: Likewise. * core-regset.c: Likewise. * corefile.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-name-parser.y: Likewise. * cp-support.c: Likewise. * cp-valprint.c: Likewise. * cris-tdep.c: Likewise. * d-exp.y: Likewise. * darwin-nat.c: Likewise. * dbxread.c: Likewise. * dcache.c: Likewise. * demangle.c: Likewise. * dicos-tdep.c: Likewise. * disasm.c: Likewise. * doublest.c: Likewise. * dsrec.c: Likewise. * dummy-frame.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * elfread.c: Likewise. * environ.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * exceptions.c: Likewise. * exec.c: Likewise. * expprint.c: Likewise. * f-exp.y: Likewise. * f-lang.c: Likewise. * f-typeprint.c: Likewise. * f-valprint.c: Likewise. * fbsd-nat.c: Likewise. * findcmd.c: Likewise. * findvar.c: Likewise. * fork-child.c: Likewise. * frame.c: Likewise. * frv-linux-tdep.c: Likewise. * frv-tdep.c: Likewise. * gdb.c: Likewise. * gdb_bfd.c: Likewise. * gdbarch.c: Likewise. * gdbarch.sh: Likewise. * gdbtypes.c: Likewise. * gnu-nat.c: Likewise. * gnu-v2-abi.c: Likewise. * gnu-v3-abi.c: Likewise. * go-exp.y: Likewise. * go-lang.c: Likewise. * go32-nat.c: Likewise. * guile/guile.c: Likewise. * guile/scm-auto-load.c: Likewise. * hppa-hpux-tdep.c: Likewise. * hppa-linux-nat.c: Likewise. * hppanbsd-tdep.c: Likewise. * hppaobsd-tdep.c: Likewise. * i386-cygwin-tdep.c: Likewise. * i386-dicos-tdep.c: Likewise. * i386-linux-tdep.c: Likewise. * i386-nto-tdep.c: Likewise. * i386-sol2-tdep.c: Likewise. * i386-tdep.c: Likewise. * i386bsd-tdep.c: Likewise. * i386gnu-nat.c: Likewise. * i386nbsd-tdep.c: Likewise. * i386obsd-tdep.c: Likewise. * i387-tdep.c: Likewise. * ia64-libunwind-tdep.c: Likewise. * ia64-linux-nat.c: Likewise. * inf-child.c: Likewise. * inf-ptrace.c: Likewise. * inf-ttrace.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * inflow.c: Likewise. * infrun.c: Likewise. * interps.c: Likewise. * iq2000-tdep.c: Likewise. * irix5-nat.c: Likewise. * jv-exp.y: Likewise. * jv-lang.c: Likewise. * jv-typeprint.c: Likewise. * jv-valprint.c: Likewise. * language.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * lm32-tdep.c: Likewise. * m2-exp.y: Likewise. * m2-typeprint.c: Likewise. * m32c-tdep.c: Likewise. * m32r-linux-nat.c: Likewise. * m32r-linux-tdep.c: Likewise. * m32r-rom.c: Likewise. * m32r-tdep.c: Likewise. * m68hc11-tdep.c: Likewise. * m68k-tdep.c: Likewise. * m68kbsd-tdep.c: Likewise. * m68klinux-nat.c: Likewise. * m68klinux-tdep.c: Likewise. * m88k-tdep.c: Likewise. * machoread.c: Likewise. * macrocmd.c: Likewise. * main.c: Likewise. * mdebugread.c: Likewise. * mem-break.c: Likewise. * memattr.c: Likewise. * memory-map.c: Likewise. * mep-tdep.c: Likewise. * mi/mi-cmd-break.c: Likewise. * mi/mi-cmd-disas.c: Likewise. * mi/mi-cmd-env.c: Likewise. * mi/mi-cmd-stack.c: Likewise. * mi/mi-cmd-var.c: Likewise. * mi/mi-cmds.c: Likewise. * mi/mi-console.c: Likewise. * mi/mi-getopt.c: Likewise. * mi/mi-interp.c: Likewise. * mi/mi-main.c: Likewise. * mi/mi-parse.c: Likewise. * microblaze-rom.c: Likewise. * microblaze-tdep.c: Likewise. * mingw-hdep.c: Likewise. * minidebug.c: Likewise. * minsyms.c: Likewise. * mips-irix-tdep.c: Likewise. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. * mips64obsd-tdep.c: Likewise. * mipsnbsd-tdep.c: Likewise. * mipsread.c: Likewise. * mn10300-linux-tdep.c: Likewise. * mn10300-tdep.c: Likewise. * monitor.c: Likewise. * moxie-tdep.c: Likewise. * mt-tdep.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-procfs.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/linux-waitpid.c: Likewise. * nbsd-tdep.c: Likewise. * nios2-linux-tdep.c: Likewise. * nto-procfs.c: Likewise. * nto-tdep.c: Likewise. * objc-lang.c: Likewise. * objfiles.c: Likewise. * opencl-lang.c: Likewise. * osabi.c: Likewise. * osdata.c: Likewise. * p-exp.y: Likewise. * p-lang.c: Likewise. * p-typeprint.c: Likewise. * parse.c: Likewise. * posix-hdep.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-sysv-tdep.c: Likewise. * ppcfbsd-tdep.c: Likewise. * ppcnbsd-tdep.c: Likewise. * ppcobsd-tdep.c: Likewise. * printcmd.c: Likewise. * procfs.c: Likewise. * prologue-value.c: Likewise. * python/py-auto-load.c: Likewise. * python/py-gdb-readline.c: Likewise. * ravenscar-thread.c: Likewise. * regcache.c: Likewise. * registry.c: Likewise. * remote-fileio.c: Likewise. * remote-m32r-sdi.c: Likewise. * remote-mips.c: Likewise. * remote-notif.c: Likewise. * remote-sim.c: Likewise. * remote.c: Likewise. * reverse.c: Likewise. * rs6000-aix-tdep.c: Likewise. * ser-base.c: Likewise. * ser-go32.c: Likewise. * ser-mingw.c: Likewise. * ser-pipe.c: Likewise. * ser-tcp.c: Likewise. * ser-unix.c: Likewise. * serial.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * shnbsd-tdep.c: Likewise. * skip.c: Likewise. * sol-thread.c: Likewise. * solib-dsbt.c: Likewise. * solib-frv.c: Likewise. * solib-osf.c: Likewise. * solib-som.c: Likewise. * solib-spu.c: Likewise. * solib-target.c: Likewise. * solib.c: Likewise. * somread.c: Likewise. * source.c: Likewise. * sparc-nat.c: Likewise. * sparc-sol2-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * sparc64fbsd-tdep.c: Likewise. * sparc64nbsd-tdep.c: Likewise. * sparcnbsd-tdep.c: Likewise. * spu-linux-nat.c: Likewise. * spu-multiarch.c: Likewise. * spu-tdep.c: Likewise. * stabsread.c: Likewise. * stack.c: Likewise. * std-regs.c: Likewise. * symfile.c: Likewise. * symmisc.c: Likewise. * symtab.c: Likewise. * target.c: Likewise. * thread.c: Likewise. * tilegx-linux-nat.c: Likewise. * tilegx-tdep.c: Likewise. * top.c: Likewise. * tracepoint.c: Likewise. * tui/tui-command.c: Likewise. * tui/tui-data.c: Likewise. * tui/tui-disasm.c: Likewise. * tui/tui-file.c: Likewise. * tui/tui-layout.c: Likewise. * tui/tui-out.c: Likewise. * tui/tui-regs.c: Likewise. * tui/tui-source.c: Likewise. * tui/tui-stack.c: Likewise. * tui/tui-win.c: Likewise. * tui/tui-windata.c: Likewise. * tui/tui-winsource.c: Likewise. * typeprint.c: Likewise. * ui-file.c: Likewise. * ui-out.c: Likewise. * user-regs.c: Likewise. * utils.c: Likewise. * v850-tdep.c: Likewise. * valarith.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * vax-tdep.c: Likewise. * vaxnbsd-tdep.c: Likewise. * vaxobsd-tdep.c: Likewise. * windows-nat.c: Likewise. * xcoffread.c: Likewise. * xml-support.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-linux-nat.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include string.h. * event-loop.c: Likewise. * linux-low.c: Likewise. * regcache.c: Likewise. * remote-utils.c: Likewise. * spu-low.c: Likewise. * utils.c: Likewise.
2014-08-07Move stddef.h to common-defs.hGary Benson1-2/+0
This commit moves the inclusion of stddef.h to common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include stddef.h. * defs.h: Do not include stddef.h. * common/common-utils.h: Likewise. * amd64fbsd-nat.c: Likewise. * bcache.c: Likewise. * charset.c: Likewise. * common/buffer.h: Likewise. * common/vec.h: Likewise. * i386bsd-nat.c: Likewise. * nat/linux-btrace.h: Likewise. * ppcfbsd-nat.c: Likewise. * ppcnbsd-tdep.h: Likewise. * ppcobsd-nat.c: Likewise. * ppcobsd-tdep.h: Likewise. * python/py-gdb-readline.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * linux-x86-low.c: Do not include stddef.h. * lynx-ppc-low.c: Likewise. * tracepoint.c: Likewise.
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker1-1/+1
2013-11-18remove gdb_string.hTom Tromey1-1/+1
This removes gdb_string.h. This patch is purely mechanical. I created it by running the two commands: git rm common/gdb_string.h perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl] 2013-11-18 Tom Tromey <tromey@redhat.com> * common/gdb_string.h: Remove. * aarch64-tdep.c: Use string.h, not gdb_string.h. * ada-exp.y: Use string.h, not gdb_string.h. * ada-lang.c: Use string.h, not gdb_string.h. * ada-lex.l: Use string.h, not gdb_string.h. * ada-typeprint.c: Use string.h, not gdb_string.h. * ada-valprint.c: Use string.h, not gdb_string.h. * aix-thread.c: Use string.h, not gdb_string.h. * alpha-linux-tdep.c: Use string.h, not gdb_string.h. * alpha-mdebug-tdep.c: Use string.h, not gdb_string.h. * alpha-nat.c: Use string.h, not gdb_string.h. * alpha-osf1-tdep.c: Use string.h, not gdb_string.h. * alpha-tdep.c: Use string.h, not gdb_string.h. * alphanbsd-tdep.c: Use string.h, not gdb_string.h. * amd64-dicos-tdep.c: Use string.h, not gdb_string.h. * amd64-linux-nat.c: Use string.h, not gdb_string.h. * amd64-linux-tdep.c: Use string.h, not gdb_string.h. * amd64-nat.c: Use string.h, not gdb_string.h. * amd64-sol2-tdep.c: Use string.h, not gdb_string.h. * amd64fbsd-tdep.c: Use string.h, not gdb_string.h. * amd64obsd-tdep.c: Use string.h, not gdb_string.h. * arch-utils.c: Use string.h, not gdb_string.h. * arm-linux-nat.c: Use string.h, not gdb_string.h. * arm-linux-tdep.c: Use string.h, not gdb_string.h. * arm-tdep.c: Use string.h, not gdb_string.h. * arm-wince-tdep.c: Use string.h, not gdb_string.h. * armbsd-tdep.c: Use string.h, not gdb_string.h. * armnbsd-nat.c: Use string.h, not gdb_string.h. * armnbsd-tdep.c: Use string.h, not gdb_string.h. * armobsd-tdep.c: Use string.h, not gdb_string.h. * avr-tdep.c: Use string.h, not gdb_string.h. * ax-gdb.c: Use string.h, not gdb_string.h. * ax-general.c: Use string.h, not gdb_string.h. * bcache.c: Use string.h, not gdb_string.h. * bfin-tdep.c: Use string.h, not gdb_string.h. * breakpoint.c: Use string.h, not gdb_string.h. * build-id.c: Use string.h, not gdb_string.h. * buildsym.c: Use string.h, not gdb_string.h. * c-exp.y: Use string.h, not gdb_string.h. * c-lang.c: Use string.h, not gdb_string.h. * c-typeprint.c: Use string.h, not gdb_string.h. * c-valprint.c: Use string.h, not gdb_string.h. * charset.c: Use string.h, not gdb_string.h. * cli-out.c: Use string.h, not gdb_string.h. * cli/cli-cmds.c: Use string.h, not gdb_string.h. * cli/cli-decode.c: Use string.h, not gdb_string.h. * cli/cli-dump.c: Use string.h, not gdb_string.h. * cli/cli-interp.c: Use string.h, not gdb_string.h. * cli/cli-logging.c: Use string.h, not gdb_string.h. * cli/cli-script.c: Use string.h, not gdb_string.h. * cli/cli-setshow.c: Use string.h, not gdb_string.h. * cli/cli-utils.c: Use string.h, not gdb_string.h. * coffread.c: Use string.h, not gdb_string.h. * common/common-utils.c: Use string.h, not gdb_string.h. * common/filestuff.c: Use string.h, not gdb_string.h. * common/linux-procfs.c: Use string.h, not gdb_string.h. * common/linux-ptrace.c: Use string.h, not gdb_string.h. * common/signals.c: Use string.h, not gdb_string.h. * common/vec.h: Use string.h, not gdb_string.h. * core-regset.c: Use string.h, not gdb_string.h. * corefile.c: Use string.h, not gdb_string.h. * corelow.c: Use string.h, not gdb_string.h. * cp-abi.c: Use string.h, not gdb_string.h. * cp-support.c: Use string.h, not gdb_string.h. * cp-valprint.c: Use string.h, not gdb_string.h. * cris-tdep.c: Use string.h, not gdb_string.h. * d-lang.c: Use string.h, not gdb_string.h. * dbxread.c: Use string.h, not gdb_string.h. * dcache.c: Use string.h, not gdb_string.h. * demangle.c: Use string.h, not gdb_string.h. * dicos-tdep.c: Use string.h, not gdb_string.h. * disasm.c: Use string.h, not gdb_string.h. * doublest.c: Use string.h, not gdb_string.h. * dsrec.c: Use string.h, not gdb_string.h. * dummy-frame.c: Use string.h, not gdb_string.h. * dwarf2-frame.c: Use string.h, not gdb_string.h. * dwarf2loc.c: Use string.h, not gdb_string.h. * dwarf2read.c: Use string.h, not gdb_string.h. * elfread.c: Use string.h, not gdb_string.h. * environ.c: Use string.h, not gdb_string.h. * eval.c: Use string.h, not gdb_string.h. * event-loop.c: Use string.h, not gdb_string.h. * exceptions.c: Use string.h, not gdb_string.h. * exec.c: Use string.h, not gdb_string.h. * expprint.c: Use string.h, not gdb_string.h. * f-exp.y: Use string.h, not gdb_string.h. * f-lang.c: Use string.h, not gdb_string.h. * f-typeprint.c: Use string.h, not gdb_string.h. * f-valprint.c: Use string.h, not gdb_string.h. * fbsd-nat.c: Use string.h, not gdb_string.h. * findcmd.c: Use string.h, not gdb_string.h. * findvar.c: Use string.h, not gdb_string.h. * fork-child.c: Use string.h, not gdb_string.h. * frame.c: Use string.h, not gdb_string.h. * frv-linux-tdep.c: Use string.h, not gdb_string.h. * frv-tdep.c: Use string.h, not gdb_string.h. * gdb.c: Use string.h, not gdb_string.h. * gdb_bfd.c: Use string.h, not gdb_string.h. * gdbarch.c: Use string.h, not gdb_string.h. * gdbtypes.c: Use string.h, not gdb_string.h. * gnu-nat.c: Use string.h, not gdb_string.h. * gnu-v2-abi.c: Use string.h, not gdb_string.h. * gnu-v3-abi.c: Use string.h, not gdb_string.h. * go-exp.y: Use string.h, not gdb_string.h. * go-lang.c: Use string.h, not gdb_string.h. * go32-nat.c: Use string.h, not gdb_string.h. * hppa-hpux-tdep.c: Use string.h, not gdb_string.h. * hppa-linux-nat.c: Use string.h, not gdb_string.h. * hppanbsd-tdep.c: Use string.h, not gdb_string.h. * hppaobsd-tdep.c: Use string.h, not gdb_string.h. * i386-cygwin-tdep.c: Use string.h, not gdb_string.h. * i386-dicos-tdep.c: Use string.h, not gdb_string.h. * i386-linux-nat.c: Use string.h, not gdb_string.h. * i386-linux-tdep.c: Use string.h, not gdb_string.h. * i386-nto-tdep.c: Use string.h, not gdb_string.h. * i386-sol2-tdep.c: Use string.h, not gdb_string.h. * i386-tdep.c: Use string.h, not gdb_string.h. * i386bsd-tdep.c: Use string.h, not gdb_string.h. * i386gnu-nat.c: Use string.h, not gdb_string.h. * i386nbsd-tdep.c: Use string.h, not gdb_string.h. * i386obsd-tdep.c: Use string.h, not gdb_string.h. * i387-tdep.c: Use string.h, not gdb_string.h. * ia64-libunwind-tdep.c: Use string.h, not gdb_string.h. * ia64-linux-nat.c: Use string.h, not gdb_string.h. * inf-child.c: Use string.h, not gdb_string.h. * inf-ptrace.c: Use string.h, not gdb_string.h. * inf-ttrace.c: Use string.h, not gdb_string.h. * infcall.c: Use string.h, not gdb_string.h. * infcmd.c: Use string.h, not gdb_string.h. * inflow.c: Use string.h, not gdb_string.h. * infrun.c: Use string.h, not gdb_string.h. * interps.c: Use string.h, not gdb_string.h. * iq2000-tdep.c: Use string.h, not gdb_string.h. * irix5-nat.c: Use string.h, not gdb_string.h. * jv-exp.y: Use string.h, not gdb_string.h. * jv-lang.c: Use string.h, not gdb_string.h. * jv-typeprint.c: Use string.h, not gdb_string.h. * jv-valprint.c: Use string.h, not gdb_string.h. * language.c: Use string.h, not gdb_string.h. * linux-fork.c: Use string.h, not gdb_string.h. * linux-nat.c: Use string.h, not gdb_string.h. * lm32-tdep.c: Use string.h, not gdb_string.h. * m2-exp.y: Use string.h, not gdb_string.h. * m2-typeprint.c: Use string.h, not gdb_string.h. * m32c-tdep.c: Use string.h, not gdb_string.h. * m32r-linux-nat.c: Use string.h, not gdb_string.h. * m32r-linux-tdep.c: Use string.h, not gdb_string.h. * m32r-rom.c: Use string.h, not gdb_string.h. * m32r-tdep.c: Use string.h, not gdb_string.h. * m68hc11-tdep.c: Use string.h, not gdb_string.h. * m68k-tdep.c: Use string.h, not gdb_string.h. * m68kbsd-tdep.c: Use string.h, not gdb_string.h. * m68klinux-nat.c: Use string.h, not gdb_string.h. * m68klinux-tdep.c: Use string.h, not gdb_string.h. * m88k-tdep.c: Use string.h, not gdb_string.h. * macrocmd.c: Use string.h, not gdb_string.h. * main.c: Use string.h, not gdb_string.h. * mdebugread.c: Use string.h, not gdb_string.h. * mem-break.c: Use string.h, not gdb_string.h. * memattr.c: Use string.h, not gdb_string.h. * memory-map.c: Use string.h, not gdb_string.h. * mep-tdep.c: Use string.h, not gdb_string.h. * mi/mi-cmd-break.c: Use string.h, not gdb_string.h. * mi/mi-cmd-disas.c: Use string.h, not gdb_string.h. * mi/mi-cmd-env.c: Use string.h, not gdb_string.h. * mi/mi-cmd-stack.c: Use string.h, not gdb_string.h. * mi/mi-cmd-var.c: Use string.h, not gdb_string.h. * mi/mi-cmds.c: Use string.h, not gdb_string.h. * mi/mi-console.c: Use string.h, not gdb_string.h. * mi/mi-getopt.c: Use string.h, not gdb_string.h. * mi/mi-interp.c: Use string.h, not gdb_string.h. * mi/mi-main.c: Use string.h, not gdb_string.h. * mi/mi-parse.c: Use string.h, not gdb_string.h. * microblaze-rom.c: Use string.h, not gdb_string.h. * microblaze-tdep.c: Use string.h, not gdb_string.h. * mingw-hdep.c: Use string.h, not gdb_string.h. * minidebug.c: Use string.h, not gdb_string.h. * minsyms.c: Use string.h, not gdb_string.h. * mips-irix-tdep.c: Use string.h, not gdb_string.h. * mips-linux-tdep.c: Use string.h, not gdb_string.h. * mips-tdep.c: Use string.h, not gdb_string.h. * mips64obsd-tdep.c: Use string.h, not gdb_string.h. * mipsnbsd-tdep.c: Use string.h, not gdb_string.h. * mipsread.c: Use string.h, not gdb_string.h. * mn10300-linux-tdep.c: Use string.h, not gdb_string.h. * mn10300-tdep.c: Use string.h, not gdb_string.h. * monitor.c: Use string.h, not gdb_string.h. * moxie-tdep.c: Use string.h, not gdb_string.h. * mt-tdep.c: Use string.h, not gdb_string.h. * nbsd-tdep.c: Use string.h, not gdb_string.h. * nios2-linux-tdep.c: Use string.h, not gdb_string.h. * nto-procfs.c: Use string.h, not gdb_string.h. * nto-tdep.c: Use string.h, not gdb_string.h. * objc-lang.c: Use string.h, not gdb_string.h. * objfiles.c: Use string.h, not gdb_string.h. * opencl-lang.c: Use string.h, not gdb_string.h. * osabi.c: Use string.h, not gdb_string.h. * osdata.c: Use string.h, not gdb_string.h. * p-exp.y: Use string.h, not gdb_string.h. * p-lang.c: Use string.h, not gdb_string.h. * p-typeprint.c: Use string.h, not gdb_string.h. * parse.c: Use string.h, not gdb_string.h. * posix-hdep.c: Use string.h, not gdb_string.h. * ppc-linux-nat.c: Use string.h, not gdb_string.h. * ppc-sysv-tdep.c: Use string.h, not gdb_string.h. * ppcfbsd-tdep.c: Use string.h, not gdb_string.h. * ppcnbsd-tdep.c: Use string.h, not gdb_string.h. * ppcobsd-tdep.c: Use string.h, not gdb_string.h. * printcmd.c: Use string.h, not gdb_string.h. * procfs.c: Use string.h, not gdb_string.h. * prologue-value.c: Use string.h, not gdb_string.h. * python/py-auto-load.c: Use string.h, not gdb_string.h. * python/py-gdb-readline.c: Use string.h, not gdb_string.h. * ravenscar-thread.c: Use string.h, not gdb_string.h. * regcache.c: Use string.h, not gdb_string.h. * registry.c: Use string.h, not gdb_string.h. * remote-fileio.c: Use string.h, not gdb_string.h. * remote-m32r-sdi.c: Use string.h, not gdb_string.h. * remote-mips.c: Use string.h, not gdb_string.h. * remote-sim.c: Use string.h, not gdb_string.h. * remote.c: Use string.h, not gdb_string.h. * reverse.c: Use string.h, not gdb_string.h. * rs6000-aix-tdep.c: Use string.h, not gdb_string.h. * ser-base.c: Use string.h, not gdb_string.h. * ser-go32.c: Use string.h, not gdb_string.h. * ser-mingw.c: Use string.h, not gdb_string.h. * ser-pipe.c: Use string.h, not gdb_string.h. * ser-tcp.c: Use string.h, not gdb_string.h. * ser-unix.c: Use string.h, not gdb_string.h. * serial.c: Use string.h, not gdb_string.h. * sh-tdep.c: Use string.h, not gdb_string.h. * sh64-tdep.c: Use string.h, not gdb_string.h. * shnbsd-tdep.c: Use string.h, not gdb_string.h. * skip.c: Use string.h, not gdb_string.h. * sol-thread.c: Use string.h, not gdb_string.h. * solib-dsbt.c: Use string.h, not gdb_string.h. * solib-frv.c: Use string.h, not gdb_string.h. * solib-osf.c: Use string.h, not gdb_string.h. * solib-spu.c: Use string.h, not gdb_string.h. * solib-target.c: Use string.h, not gdb_string.h. * solib.c: Use string.h, not gdb_string.h. * somread.c: Use string.h, not gdb_string.h. * source.c: Use string.h, not gdb_string.h. * sparc-nat.c: Use string.h, not gdb_string.h. * sparc-sol2-tdep.c: Use string.h, not gdb_string.h. * sparc-tdep.c: Use string.h, not gdb_string.h. * sparc64-tdep.c: Use string.h, not gdb_string.h. * sparc64fbsd-tdep.c: Use string.h, not gdb_string.h. * sparc64nbsd-tdep.c: Use string.h, not gdb_string.h. * sparcnbsd-tdep.c: Use string.h, not gdb_string.h. * spu-linux-nat.c: Use string.h, not gdb_string.h. * spu-multiarch.c: Use string.h, not gdb_string.h. * spu-tdep.c: Use string.h, not gdb_string.h. * stabsread.c: Use string.h, not gdb_string.h. * stack.c: Use string.h, not gdb_string.h. * std-regs.c: Use string.h, not gdb_string.h. * symfile.c: Use string.h, not gdb_string.h. * symmisc.c: Use string.h, not gdb_string.h. * symtab.c: Use string.h, not gdb_string.h. * target.c: Use string.h, not gdb_string.h. * thread.c: Use string.h, not gdb_string.h. * tilegx-linux-nat.c: Use string.h, not gdb_string.h. * tilegx-tdep.c: Use string.h, not gdb_string.h. * top.c: Use string.h, not gdb_string.h. * tracepoint.c: Use string.h, not gdb_string.h. * tui/tui-command.c: Use string.h, not gdb_string.h. * tui/tui-data.c: Use string.h, not gdb_string.h. * tui/tui-disasm.c: Use string.h, not gdb_string.h. * tui/tui-file.c: Use string.h, not gdb_string.h. * tui/tui-layout.c: Use string.h, not gdb_string.h. * tui/tui-out.c: Use string.h, not gdb_string.h. * tui/tui-regs.c: Use string.h, not gdb_string.h. * tui/tui-source.c: Use string.h, not gdb_string.h. * tui/tui-stack.c: Use string.h, not gdb_string.h. * tui/tui-win.c: Use string.h, not gdb_string.h. * tui/tui-windata.c: Use string.h, not gdb_string.h. * tui/tui-winsource.c: Use string.h, not gdb_string.h. * typeprint.c: Use string.h, not gdb_string.h. * ui-file.c: Use string.h, not gdb_string.h. * ui-out.c: Use string.h, not gdb_string.h. * user-regs.c: Use string.h, not gdb_string.h. * utils.c: Use string.h, not gdb_string.h. * v850-tdep.c: Use string.h, not gdb_string.h. * valarith.c: Use string.h, not gdb_string.h. * valops.c: Use string.h, not gdb_string.h. * valprint.c: Use string.h, not gdb_string.h. * value.c: Use string.h, not gdb_string.h. * varobj.c: Use string.h, not gdb_string.h. * vax-tdep.c: Use string.h, not gdb_string.h. * vaxnbsd-tdep.c: Use string.h, not gdb_string.h. * vaxobsd-tdep.c: Use string.h, not gdb_string.h. * windows-nat.c: Use string.h, not gdb_string.h. * xcoffread.c: Use string.h, not gdb_string.h. * xml-support.c: Use string.h, not gdb_string.h. * xstormy16-tdep.c: Use string.h, not gdb_string.h. * xtensa-linux-nat.c: Use string.h, not gdb_string.h.
2013-05-20 * python/py-arch.c (gdbpy_initialize_arch): Return 'int'.Tom Tromey1-4/+3
Check errors. * python/py-auto-load.c (gdbpy_initialize_auto_load): Return 'int'. * python/py-block.c (gdbpy_initialize_blocks): Return 'int'. Check errors. * python/py-breakpoint.c (gdbpy_initialize_breakpoints): Return 'int'. Check errors. * python/py-cmd.c (gdbpy_initialize_commands): Return 'int'. Check errors. * python/py-event.c (gdbpy_initialize_event): Return 'int'. Check errors. * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Change generated init function to return 'int'. * python/py-evtregistry.c (gdbpy_initialize_eventregistry): Return 'int'. Check errors. * python/py-evts.c (gdbpy_initialize_py_events): Return 'int'. Check errors. * python/py-finishbreakpoint.c (gdbpy_initialize_finishbreakpoints): Return 'int'. Check errors. * python/py-frame.c (gdbpy_initialize_frames): Return 'int'. Check errors. * python/py-function.c (gdbpy_initialize_functions): Return 'int'. Check errors. * python/py-gdb-readline.c (gdbpy_initialize_gdb_readline): Check errors. * python/py-inferior.c (gdbpy_initialize_inferior): Return 'int'. Check errors. * python/py-infthread.c (gdbpy_initialize_thread): Return 'int'. Check errors. * python/py-lazy-string.c (gdbpy_initialize_lazy_string): Return 'int'. Check errors. * python/py-objfile.c (gdbpy_initialize_objfile): Return 'int'. Check errors. * python/py-param.c (gdbpy_initialize_parameters): Return 'int'. Check errors. * python/py-progspace.c (gdbpy_initialize_pspace): Return 'int'. Check errors. * python/py-symbol.c (gdbpy_initialize_symbols): Return 'int'. Check errors. * python/py-symtab.c (gdbpy_initialize_symtabs): Return 'int'. Check errors. * python/py-type.c (gdbpy_initialize_types): Return 'int'. Check errors. * python/py-value.c (gdbpy_initialize_values): Return 'int'. Check errors. * python/python-internal.h (gdbpy_initialize_auto_load, gdbpy_initialize_values, gdbpy_initialize_frames, gdbpy_initialize_symtabs, gdbpy_initialize_commands, gdbpy_initialize_symbols, gdbpy_initialize_symtabs, gdbpy_initialize_blocks, gdbpy_initialize_types, gdbpy_initialize_functions, gdbpy_initialize_pspace, gdbpy_initialize_objfile, gdbpy_initialize_breakpoints, gdbpy_initialize_finishbreakpoints, gdbpy_initialize_lazy_string, gdbpy_initialize_parameters, gdbpy_initialize_thread, gdbpy_initialize_inferior, gdbpy_initialize_eventregistry, gdbpy_initialize_event, gdbpy_initialize_py_events, gdbpy_initialize_stop_event, gdbpy_initialize_signal_event, gdbpy_initialize_breakpoint_event, gdbpy_initialize_continue_event, gdbpy_initialize_exited_event, gdbpy_initialize_thread_event, gdbpy_initialize_new_objfile_event, gdbpy_initialize_arch): Update. Use CPYCHECKER_NEGATIVE_RESULT_SETS_EXCEPTION. * python/python.c (gdb_python_initialized): New global. (gdbpy_initialize_events): Return 'int'. Check errors. (_initialize_python): Check errors. Set gdb_python_initialized.
2013-01-312013-01-31 Aleksandar Ristovski <aristovski@qnx.com>Aleksandar Ristovski1-1/+1
* charset.c (intermediate_encoding): Remove unused i. * completer.c (signal_completer): Remove unused i. * continuations.c (discard_my_continuations_1): Remove unused continuation_ptr. * corelow.c (core_close): Remove unuseD name. (get_core_siginfo): Remove unused pid. * cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused i, cps. * dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset. (loclist_describe_location): Remove unused first. * event-top.c (command_line_handler): Remove unused got_eof. * exec.c (exec_close_1): Remove unused need_symtab_cleanup. (resize_section_table): Remove unused old_value. * gdb_bfd.c (gdb_bfd_map_section): Remove unused header. * gnu-v3-abi.c (compute_vtable_size): Remove unused addr. * i386-tdep.c (i386_process_record): Remove unused rex. * infcmd.c (get_return_value): Remove unused uiout. * jv-lang.c (type_from_class): Remove unused is_array. * jv-valprint.c (java_val_print): Remove unused i. * linux-nat.c (linux_nat_stop_lwp): Remove unused ptid. * linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid. * m2-typeprint.c (m2_print_type): Remove unused code. * macroexp.c (get_character_constant): Remove unused body_start. (macro_stringify): Remove unused result. * objc-lang.c (find_methods): Remove unused gdbarch. * objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2. * regcache.c (regcache_cooked_read): Remove unused gdbarch. * stack.c (print_frame_args): Remove unused summary. * thread.c (thread_apply_command): Remove unused p. * valarith.c (value_x_unop): Remove unused mangle_ptr. * valops.c (search_struct_method): Remove unused skip. * valprint.c (generic_val_print): Remove unused byte_order. * varobj.c (varobj_update): Remove unused changed. * cli/cli-cmds.c (complete_command): Remove unused next_item. (alias_command): Remove unused c. * mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c. * mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused format. (mi_cmd_data_write_memory): Remove unused word_format. (mi_cmd_data_write_memory_bytes): Remove unused r. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused p_start, p_end. * python/python.c (_initialize_python): Remove unused cmd_name, cmd. * tui/tui-disasm.c (tui_set_disassem_content): Remove unused line_width. Reference: http://sourceware.org/ml/gdb-patches/2013-01/msg00766.html
2013-01-01Update years in copyright notice for the GDB files.Joel Brobecker1-1/+1
Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.
2012-08-22 Enable readline in Python in a GDB-specific way and block theYit Phang Khoo1-0/+113
standard Python readline module to prevent conflicts with GDB. * Makefile.in (SUBDIR_PYTHON_OBS): Add py-gdb-readline.o. (SUBDIR_PYTHON_SRCS): Add python/py-gdb-readline.c. (py-gdb-readline.o): Add rule to compile python/py-gdb-readline.c. * python/py-gdb-readline.c: New file. * python/python-internal.h (gdbpy_initialize_gdb_readline): New prototype. * python/python.c (_initialize_python): Call gdbpy_initialize_gdb_readline.
generated by cgit v1.1 at 2025-01-17 21:21:12 +0000