| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In a later commit in this series I will propose removing all of the
explicit gdbpy_initialize_* calls from python.c and replace these
calls with a more generic mechanism.
One of the side effects of this generic mechanism is that the order in
which the various Python sub-systems within GDB are initialized is no
longer guaranteed.
On the whole I don't think this matters, most of the sub-systems are
independent of each other, though testing did reveal a few places
where we did have dependencies, though I don't think those
dependencies were explicitly documented in comment anywhere.
This commit is similar to the previous one, and fixes the second
dependency issue that I found.
In this case the finish_breakpoint_object_type uses the
breakpoint_object_type as its tp_base, this means that
breakpoint_object_type must have been initialized with a call to
PyType_Ready before finish_breakpoint_object_type can be initialized.
Previously we depended on the ordering of calls to
gdbpy_initialize_breakpoints and gdbpy_initialize_finishbreakpoints in
python.c.
After this commit a new function gdbpy_breakpoint_init_breakpoint_type
exists, this function ensures that breakpoint_object_type has been
initialized, and can be called from any gdbpy_initialize_* function.
I feel that this change makes the dependency explicit, which I think
is a good thing.
There should be no user visible changes after this commit.
|
|
This changes ui_out_redirect_pop to also perform the redirection, and
then updates several sites to use this, rather than explicit
redirects.
|
|
PR python/18385
v7:
This version addresses the issues pointed out by Tom.
Added nullchecks for Python object creations.
Changed from using PyLong_FromLong to the gdb_py-versions.
Re-factored some code to make it look more cohesive.
Also added the more safe Python reference count decrement PY_XDECREF,
even though the BreakpointLocation type is never instantiated by the
user (explicitly documented in the docs) decrementing < 0 is made
impossible with the safe call.
Tom pointed out that using the policy class explicitly to decrement a
reference counted object was not the way to go, so this has instead been
wrapped in a ref_ptr that handles that for us in blocpy_dealloc.
Moved macro from py-internal to py-breakpoint.c.
Renamed section at the bottom of commit message "Patch Description".
v6:
This version addresses the points Pedro gave in review to this patch.
Added the attributes `function`, `fullname` and `thread_groups`
as per request by Pedro with the argument that it more resembles the
output of the MI-command "-break-list". Added documentation for these attributes.
Cleaned up left overs from copy+paste in test suite, removed hard coding
of line numbers where possible.
Refactored some code to use more c++-y style range for loops
wrt to breakpoint locations.
Changed terminology, naming was very inconsistent. Used a variety of "parent",
"owner". Now "owner" is the only term used, and the field in the
gdb_breakpoint_location_object now also called "owner".
v5:
Changes in response to review by Tom Tromey:
- Replaced manual INCREF/DECREF calls with
gdbpy_ref ptrs in places where possible.
- Fixed non-gdb style conforming formatting
- Get parent of bploc increases ref count of parent.
- moved bploc Python definition to py-breakpoint.c
The INCREF of self in bppy_get_locations is due
to the individual locations holding a reference to
it's owner. This is decremented at de-alloc time.
The reason why this needs to be here is, if the user writes
for instance;
py loc = gdb.breakpoints()[X].locations[Y]
The breakpoint owner object is immediately going
out of scope (GC'd/dealloced), and the location
object requires it to be alive for as long as it is alive.
Thanks for your review, Tom!
v4:
Fixed remaining doc issues as per request
by Eli.
v3:
Rewritten commit message, shortened + reworded,
added tests.
Patch Description
Currently, the Python API lacks the ability to
query breakpoints for their installed locations,
and subsequently, can't query any information about them, or
enable/disable individual locations.
This patch solves this by adding Python type gdb.BreakpointLocation.
The type is never instantiated by the user of the Python API directly,
but is produced by the gdb.Breakpoint.locations attribute returning
a list of gdb.BreakpointLocation.
gdb.Breakpoint.locations:
The attribute for retrieving the currently installed breakpoint
locations for gdb.Breakpoint. Matches behavior of
the "info breakpoints" command in that it only
returns the last known or currently inserted breakpoint locations.
BreakpointLocation contains 7 attributes
6 read-only attributes:
owner: location owner's Python companion object
source: file path and line number tuple: (string, long) / None
address: installed address of the location
function: function name where location was set
fullname: fullname where location was set
thread_groups: thread groups (inferiors) where location was set.
1 writeable attribute:
enabled: get/set enable/disable this location (bool)
Access/calls to these, can all throw Python exceptions (documented in
the online documentation), and that's due to the nature
of how breakpoint locations can be invalidated
"behind the scenes", either by them being removed
from the original breakpoint or changed,
like for instance when a new symbol file is loaded, at
which point all breakpoint locations are re-created by GDB.
Therefore this patch has chosen to be non-intrusive:
it's up to the Python user to re-request the locations if
they become invalid.
Also there's event handlers that handle new object files etc, if a Python
user is storing breakpoint locations in some larger state they've
built up, refreshing the locations is easy and it only comes
with runtime overhead when the Python user wants to use them.
gdb.BreakpointLocation Python type
struct "gdbpy_breakpoint_location_object" is found in python-internal.h
Its definition, layout, methods and functions
are found in the same file as gdb.Breakpoint (py-breakpoint.c)
1 change was also made to breakpoint.h/c to make it possible
to enable and disable a bp_location* specifically,
without having its LOC_NUM, as this number
also can change arbitrarily behind the scenes.
Updated docs & news file as per request.
Testsuite: tests the .source attribute and the disabling of
individual locations.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=18385
Change-Id: I302c1c50a557ad59d5d18c88ca19014731d736b0
|
|
This converts location_spec_to_string to a method of location_spec,
simplifying the code using it, as it no longer has to use
std::unique_ptr::get().
Change-Id: I621bdad8ea084470a2724163f614578caf8f2dd5
|
|
Currently, there's the location_spec hierarchy, and then some
location_spec subclasses have their own struct type holding all their
data fields.
I.e., there is this:
location_spec
explicit_location_spec
linespec_location_spec
address_location_spec
probe_location_spec
and then these separate types:
explicit_location
linespec_location
where:
explicit_location_spec
has-a explicit_location
linespec_location_spec
has-a linespec_location
This patch eliminates explicit_location and linespec_location,
inlining their members in the corresponding location_spec type.
The location_spec subclasses were the ones currently defined in
location.c, so they are moved to the header. Since the definitions of
the classes are now visible, we no longer need location_spec_deleter.
Some constructors that are used for cloning location_specs, like:
explicit explicit_location_spec (const struct explicit_location *loc)
... were converted to proper copy ctors.
In the process, initialize_explicit_location is eliminated, and some
functions that returned the "data type behind a locspec", like
get_linespec_location are converted to downcast functions, like
as_linespec_location_spec.
Change-Id: Ia31ccef9382b25a52b00fa878c8df9b8cf2a6c5a
|
|
Currently, GDB internally uses the term "location" for both the
location specification the user input (linespec, explicit location, or
an address location), and for actual resolved locations, like the
breakpoint locations, or the result of decoding a location spec to
SaLs. This is expecially confusing in the breakpoints module, as
struct breakpoint has these two fields:
breakpoint::location;
breakpoint::loc;
"location" is the location spec, and "loc" is the resolved locations.
And then, we have a method called "locations()", which returns the
resolved locations as range...
The location spec type is presently called event_location:
/* Location we used to set the breakpoint. */
event_location_up location;
and it is described like this:
/* The base class for all an event locations used to set a stop event
in the inferior. */
struct event_location
{
and even that is incorrect... Location specs are used for finding
actual locations in the program in scenarios that have nothing to do
with stop events. E.g., "list" works with location specs.
To clean all this confusion up, this patch renames "event_location" to
"location_spec" throughout, and then all the variables that hold a
location spec, they are renamed to include "spec" in their name, like
e.g., "location" -> "locspec". Similarly, functions that work with
location specs, and currently have just "location" in their name are
renamed to include "spec" in their name too.
Change-Id: I5814124798aa2b2003e79496e78f95c74e5eddca
|
|
Now that filtered and unfiltered output can be treated identically, we
can unify the printf family of functions. This is done under the name
"gdb_printf". Most of this patch was written by script.
|
|
New in this version:
- Rebase on master, fix a few more issues that appeared.
python-internal.h contains a number of macros that helped make the code
work with both Python 2 and 3. Remove them and adjust the code to use
the Python 3 functions.
Change-Id: I99a3d80067fb2d65de4f69f6473ba6ffd16efb2d
|
|
Currently, gdb's Python layer captures the current architecture and
language when "entering" Python code. This has some undesirable
effects, and so this series changes how this is handled.
First, there is code like this:
gdbpy_enter enter_py (python_gdbarch, python_language);
This is incorrect, because both of these are NULL when not otherwise
assigned. This can cause crashes in some cases -- I've added one to
the test suite. (Note that this crasher is just an example, other
ones along the same lines are possible.)
Second, when the language is captured in this way, it means that
Python code cannot affect the current language for its own purposes.
It's reasonable to want to write code like this:
gdb.execute('set language mumble')
... stuff using the current language
gdb.execute('set language previous-value')
However, this won't actually work, because the language is captured on
entry. I've added a test to show this as well.
This patch changes gdb to try to avoid capturing the current values.
The Python concept of the current gdbarch is only set in those few
cases where a non-default value is computed or needed; and the
language is not captured at all -- instead, in the cases where it's
required, the current language is temporarily changed.
|
|
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
|
|
The motivation is to reduce the number of places where unmanaged
pointers are returned from allocation type routines. All of the
callers are updated.
There should be no user visible changes after this commit.
|
|
This changes struct breakpoint to use unique_xmalloc_ptr in a couple
of spots, removing a bit of manual memory management.
|
|
This changes struct watchpoint to use unique_xmalloc_ptr in a couple
of places, removing a bit of manual memory management.
|
|
This commit adds initial support for catchpoints to the python
breakpoint API.
This commit adds a BP_CATCHPOINT constant which corresponds to
GDB's internal bp_catchpoint. The new constant is documented in the
manual.
The user can't create breakpoints with type BP_CATCHPOINT after this
commit, but breakpoints that already exist, obtained with the
`gdb.breakpoints` function, can now have this type. Additionally,
when a stop event is reported for hitting a catchpoint, GDB will now
report a BreakpointEvent with the attached breakpoint being of type
BP_CATCHPOINT - previously GDB would report a generic StopEvent in
this situation.
gdb/ChangeLog:
* NEWS: Mention Python BP_CATCHPOINT feature.
* python/py-breakpoint.c (pybp_codes): Add bp_catchpoint support.
(bppy_init): Likewise.
(gdbpy_breakpoint_created): Likewise.
gdb/doc/ChangeLog:
* python.texinfo (Breakpoints In Python): Add BP_CATCHPOINT
description.
gdb/testsuite/ChangeLog:
* gdb.python/py-breakpoint.c (do_throw): New function.
(main): Call do_throw.
* gdb.python/py-breakpoint.exp (test_catchpoints): New proc.
|
|
Now that we have range functions that let us use ranged for loops, we
can remove iterate_over_breakpoints in favor of those, which are easier
to read and write. This requires exposing the declaration of
all_breakpoints and all_breakpoints_safe in breakpoint.h, as well as the
supporting types.
Change some users of iterate_over_breakpoints to use all_breakpoints,
when they don't need to delete the breakpoint, and all_breakpoints_safe
otherwise.
gdb/ChangeLog:
* breakpoint.h (iterate_over_breakpoints): Remove. Update
callers to use all_breakpoints or all_breakpoints_safe.
(breakpoint_range, all_breakpoints, breakpoint_safe_range,
all_breakpoints_safe): Move here.
* breakpoint.c (all_breakpoints, all_breakpoints_safe): Make
non-static.
(iterate_over_breakpoints): Remove.
* python/py-finishbreakpoint.c (bpfinishpy_detect_out_scope_cb):
Return void.
* python/py-breakpoint.c (build_bp_list): Add comment, reverse
return value logic.
* guile/scm-breakpoint.c (bpscm_build_bp_list): Return void.
Change-Id: Idde764a1f577de0423e4f2444a7d5cdb01ba5e48
|
|
Adds some new debugging to python/py-breakpoint.c.
gdb/ChangeLog:
* python/py-breakpoint.c (pybp_debug): New static global.
(show_pybp_debug): New function.
(pybp_debug_printf): Define.
(PYBP_SCOPED_DEBUG_ENTER_EXIT): Define.
(gdbpy_breakpoint_created): Add some debugging.
(gdbpy_breakpoint_deleted): Likewise.
(gdbpy_breakpoint_modified): Likewise.
(_initialize_py_breakpoint): New function.
gdb/doc/ChangeLog:
* python.texinfo (Python Commands): Document 'set debug
py-breakpoint' and 'show debug py-breakpoint'.
|
|
Give a name to each observer, this will help produce more meaningful
debug message.
gdbsupport/ChangeLog:
* observable.h (class observable) <struct observer> <observer>:
Add name parameter.
<name>: New field.
<attach>: Add name parameter, update all callers.
Change-Id: Ie0cc4664925215b8d2b09e026011b7803549fba0
|
|
The 'create_breakpoint' function takes a 'parse_extra' argument that
determines whether the condition, thread, and force-condition
specifiers should be parsed from the extra string or be used from the
function arguments. However, for the case when 'parse_extra' is
false, there is no way to pass the force-condition specifier. This
patch adds it as a new argument.
Also, in the case when parse_extra is false, the current behavior is
as if the condition is being forced. This is a bug. The default
behavior should reject the breakpoint. See below for a demo of this
incorrect behavior. (The MI command '-break-insert' uses the
'create_breakpoint' function with parse_extra=0.)
$ gdb -q --interpreter=mi3 /tmp/simple
=thread-group-added,id="i1"
=cmd-param-changed,param="history save",value="on"
=cmd-param-changed,param="auto-load safe-path",value="/"
~"Reading symbols from /tmp/simple...\n"
(gdb)
-break-insert -c junk -f main
&"warning: failed to validate condition at location 1, disabling:\n "
&"No symbol \"junk\" in current context.\n"
^done,bkpt={number="1",type="breakpoint",disp="keep",enabled="y",addr="<MULTIPLE>",cond="junk",times="0",original-location="main",locations=[{number="1.1",enabled="N",addr="0x000000000000114e",func="main",file="/tmp/simple.c",fullname="/tmp/simple.c",line="2",thread-groups=["i1"]}]}
(gdb)
break main if junk
&"break main if junk\n"
&"No symbol \"junk\" in current context.\n"
^error,msg="No symbol \"junk\" in current context."
(gdb)
break main -force-condition if junk
&"break main -force-condition if junk\n"
~"Note: breakpoint 1 also set at pc 0x114e.\n"
&"warning: failed to validate condition at location 1, disabling:\n "
&"No symbol \"junk\" in current context.\n"
~"Breakpoint 2 at 0x114e: file /tmp/simple.c, line 2.\n"
=breakpoint-created,bkpt={number="2",type="breakpoint",disp="keep",enabled="y",addr="<MULTIPLE>",cond="junk",times="0",original-location="main",locations=[{number="2.1",enabled="N",addr="0x000000000000114e",func="main",file="/tmp/simple.c",fullname="/tmp/simple.c",line="2",thread-groups=["i1"]}]}
^done
(gdb)
After applying this patch, we get the behavior below:
(gdb)
-break-insert -c junk -f main
^error,msg="No symbol \"junk\" in current context."
This restores the behavior that is present in the existing releases.
gdb/ChangeLog:
2021-04-21 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* breakpoint.h (create_breakpoint): Add a new parameter,
'force_condition'.
* breakpoint.c (create_breakpoint): Use the 'force_condition'
argument when 'parse_extra' is false to check if the condition
is invalid at all of the breakpoint locations.
Update the users below.
(break_command_1)
(dprintf_command)
(trace_command)
(ftrace_command)
(strace_command)
(create_tracepoint_from_upload): Update.
* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Update.
* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Update.
* python/py-breakpoint.c (bppy_init): Update.
* python/py-finishbreakpoint.c (bpfinishpy_init): Update.
gdb/testsuite/ChangeLog:
2021-04-21 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.mi/mi-break.exp: Extend with checks for invalid breakpoint
conditions.
|
|
This allows the creation of hardware breakpoints in Python with
gdb.Breakpoint(type=gdb.BP_HARDWARE_BREAKPOINT)
And they are included in the sequence returned by gdb.breakpoints().
gdb/ChangeLog:
2021-01-21 Hannes Domani <ssbssa@yahoo.de>
PR python/19151
* python/py-breakpoint.c (bppy_get_location): Handle
bp_hardware_breakpoint.
(bppy_init): Likewise.
(gdbpy_breakpoint_created): Likewise.
gdb/doc/ChangeLog:
2021-01-21 Hannes Domani <ssbssa@yahoo.de>
PR python/19151
* python.texi (Breakpoints In Python): Document
gdb.BP_HARDWARE_BREAKPOINT.
gdb/testsuite/ChangeLog:
2021-01-21 Hannes Domani <ssbssa@yahoo.de>
PR python/19151
* gdb.python/py-breakpoint.exp: Add tests for hardware breakpoints.
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
The previous patch made it possible to define a condition if it's
valid at some locations. If the condition is invalid at all of the
locations, it's rejected. However, there may be cases where the user
knows the condition *will* be valid at a location in the future,
e.g. due to a shared library load.
To make it possible that such condition can be defined, this patch
adds an optional '-force' flag to the 'condition' command, and,
respectively, a '-force-condition' flag to the 'break'command. When
the force flag is passed, the condition is not rejected even when it
is invalid for all the current locations (note that all the locations
would be internally disabled in this case).
For instance:
(gdb) break test.c:5
Breakpoint 1 at 0x1155: file test.c, line 5.
(gdb) cond 1 foo == 42
No symbol "foo" in current context.
Defining the condition was not possible because 'foo' is not
available. The user can override this behavior with the '-force'
flag:
(gdb) cond -force 1 foo == 42
warning: failed to validate condition at location 1.1, disabling:
No symbol "foo" in current context.
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep y <MULTIPLE>
stop only if foo == 42
1.1 N 0x0000000000001155 in main at test.c:5
Now the condition is accepted, but the location is automatically
disabled. If a future location has a context in which 'foo' is
available, that location would be enabled.
For the 'break' command, -force-condition has the same result:
(gdb) break test.c:5 -force-condition if foo == 42
warning: failed to validate condition at location 0x1169, disabling:
No symbol "foo" in current context.
Breakpoint 1 at 0x1169: file test.c, line 5.
gdb/ChangeLog:
2020-10-27 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* breakpoint.h (set_breakpoint_condition): Add a new bool parameter.
* breakpoint.c: Update the help text of the 'condition' and 'break'
commands.
(set_breakpoint_condition): Take a new bool parameter
to control whether condition definition should be forced even when
the condition expression is invalid in all of the current locations.
(condition_command): Update the call to 'set_breakpoint_condition'.
(find_condition_and_thread): Take the "-force-condition" flag into
account.
* linespec.c (linespec_keywords): Add "-force-condition" as an
element.
(FORCE_KEYWORD_INDEX): New #define.
(linespec_lexer_lex_keyword): Update to consider "-force-condition"
as a keyword.
* ada-lang.c (create_ada_exception_catchpoint): Ditto.
* guile/scm-breakpoint.c (gdbscm_set_breakpoint_condition_x): Ditto.
* python/py-breakpoint.c (bppy_set_condition): Ditto.
* NEWS: Mention the changes to the 'break' and 'condition' commands.
gdb/testsuite/ChangeLog:
2020-10-27 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.base/condbreak-multi-context.exp: Expand to test forcing
the condition.
* gdb.linespec/cpcompletion.exp: Update to consider the
'-force-condition' keyword.
* gdb.linespec/explicit.exp: Ditto.
* lib/completion-support.exp: Ditto.
gdb/doc/ChangeLog:
2020-10-27 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.texinfo (Set Breaks): Document the '-force-condition' flag
of the 'break'command.
* gdb.texinfo (Conditions): Document the '-force' flag of the
'condition' command.
|
|
Avoid the use of PyInt_FromLong, preferring gdb_py_object_from_longest
instead. I found found another spot that was incorrectly handling
errors (see gdbpy_create_ptid_object) while writing this patch; it is
fixed here.
gdb/ChangeLog
2020-09-15 Tom Tromey <tromey@adacore.com>
* python/python-internal.h (PyInt_FromLong): Remove define.
* python/py-value.c (convert_value_from_python): Use
gdb_py_object_from_longest.
* python/py-type.c (typy_get_code): Use
gdb_py_object_from_longest.
* python/py-symtab.c (salpy_get_line): Use
gdb_py_object_from_longest.
* python/py-symbol.c (sympy_get_addr_class, sympy_line): Use
gdb_py_object_from_longest.
* python/py-record.c (recpy_gap_reason_code): Use
gdb_py_object_from_longest.
* python/py-record-btrace.c (recpy_bt_insn_size)
(recpy_bt_func_level, btpy_list_count): Use
gdb_py_object_from_longest.
* python/py-infthread.c (gdbpy_create_ptid_object): Use
gdb_py_object_from_longest. Fix error handling.
* python/py-framefilter.c (bootstrap_python_frame_filters): Use
gdb_py_object_from_longest.
* python/py-frame.c (frapy_type, frapy_unwind_stop_reason): Use
gdb_py_object_from_longest.
* python/py-breakpoint.c (bppy_get_type, bppy_get_number)
(bppy_get_thread, bppy_get_task, bppy_get_hit_count)
(bppy_get_ignore_count): Use gdb_py_object_from_longest.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
The documentation for make-breakpoint from the Guile API and the `spec'
variant of the gdb.Breakpoint constructor from the Python API state that
the format acceptable for location strings is the same as that accepted
by the break command. However, using the -probe qualifier at the
beginning of the location string causes a GDB internal error as it
attempts to decode a probe location in the wrong code path. Without this
functionality, there doesn't appear to be another way to set breakpoints
on probe points from Python or Guile scripts.
This patch introduces a new helper function that returns a
breakpoint_ops instance appropriate for a parsed location and updates
the Guile and Python bindings to use said function, rather than the
current hard-coded use of bkpt_breakpoint_ops. Since this logic is
duplicated in the handling of the `break' and `trace' commands, those
are also updated to call into the new helper function.
gdb/ChangeLog:
2019-12-10 George Barrett <bob@bob131.so>
Fix scripted probe breakpoints.
* breakpoint.c (tracepoint_probe_breakpoint_ops): Move
declaration forward.
(breakpoint_ops_for_event_location_type)
(breakpoint_ops_for_event_location): Add function definitions.
(break_command_1, trace_command): Use
breakpoint_ops_for_event_location.
* breakpoint.h (breakpoint_ops_for_event_location): Add function
declarations.
* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Use
breakpoint_ops_for_event_location.
* python/py-breakpoint.c (bppy_init): Use
breakpoint_ops_for_event_location.
gdb/testsuite/ChangeLog:
2019-12-10 George Barrett <bob@bob131.so>
Test scripted probe breakpoints.
* gdb.guile/scm-breakpoint.c (main): Add probe point.
* gdb.python/py-breakpoint.c (main): Likewise.
* gdb.guile/scm-breakpoint.exp (test_bkpt_probe): Add probe
specifier test.
* gdb.python/py-breakpoint.exp (test_bkpt_probe): Likewise.
|
|
valgrind reports a leak when a breakpoint is created then deleted:
==1313== 40 bytes in 1 blocks are definitely lost in loss record 1,115 of 8,596
==1313== at 0x4835753: malloc (vg_replace_malloc.c:307)
==1313== by 0x6E05BC: _PyObject_New (object.c:255)
==1313== by 0x470E4B: gdbpy_breakpoint_created(breakpoint*) (py-breakpoint.c:1023)
==1313== by 0x2946D9: operator() (std_function.h:687)
==1313== by 0x2946D9: notify (observable.h:106)
==1313== by 0x2946D9: install_breakpoint(int, std::unique_ptr<breakpoint, std::default_delete<breakpoint> >&&, int) (breakpoint.c:8136)
==1313== by 0x295BCA: create_breakpoint_sal (breakpoint.c:8878)
==1313== by 0x295BCA: create_breakpoints_sal (breakpoint.c:8919)
==1313== by 0x295BCA: create_breakpoints_sal_default (breakpoint.c:13671)
...
The leak is due to a superfluous Py_INCREF when the python object
is allocated inside gdbpy_breakpoint_created, when the python object
is allocated locally: this object has already a refcount of 1, and
the only reference is the reference from the C breakpoint object.
The Py_INCREF is however needed when the python object was created from
python: the python object was stored in bppy_pending_object, and
gdbpy_breakpoint_created creates a new reference to this object.
Solve the leak by calling 'Py_INCREF (newbp);' only in the bppy_pending_object
case.
Regression tested on debian/amd64 natively and under valgrind on centos/amd64.
Before the patch, 795 tests have a definite leak.
After the patch, 197 have a definite leak.
Thanks to Tom, that helped on irc with the python refcount logic.
gdb/ChangeLog
2019-11-14 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* python/py-finishbreakpoint.c (gdbpy_breakpoint_created):
only call Py_INCREF (newbp) in the bppy_pending_object case.
|
|
This allows callers to pass in capturing lambdas. Also changes the return
type to bool.
gdb/ChangeLog:
2019-10-15 Christian Biesinger <cbiesinger@google.com>
* breakpoint.c (iterate_over_breakpoints): Change function pointer
to a gdb::function_view and return value to bool.
* breakpoint.h (iterate_over_breakpoints): Likewise.
* dummy-frame.c (pop_dummy_frame_bpt): Update.
(pop_dummy_frame): Update.
* guile/scm-breakpoint.c (bpscm_build_bp_list): Update.
(gdbscm_breakpoints): Update.
* python/py-breakpoint.c (build_bp_list): Update.
(gdbpy_breakpoints): Update.
* python/py-finishbreakpoint.c (bpfinishpy_detect_out_scope_cb):
Update.
(bpfinishpy_handle_stop): Update.
(bpfinishpy_handle_exit): Update.
* solib-svr4.c (svr4_update_solib_event_breakpoint): Update.
(svr4_update_solib_event_breakpoints): Update.
Change-Id: Ia9de4deecae562a70a40f5cd49f5a74d64570251
|
|
Currently, with:
(gdb) catch catch
Catchpoint 1 (catch)
(gdb) catch throw
Catchpoint 2 (throw)
(gdb) catch rethrow
Catchpoint 3 (rethrow)
You get:
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep y 0x0000000000b122af exception catch
2 breakpoint keep y 0x0000000000b1288d exception throw
3 breakpoint keep y 0x0000000000b12931 exception rethrow
I think it doesn't make much sense usability-wise, to show a
catchpoint as a breakpoint. The fact that GDB sets a breakpoint at
some magic address in the C++ run time is an implementation detail,
IMO. And as seen in the previous patch, such a catchpoint can end up
with more than one location/address even, so showing a single address
isn't entirely accurate.
This commit hides the addresses from view, and makes GDB show
"catchpoint" for type as well:
(gdb) info breakpoints
Num Type Disp Enb Address What
1 catchpoint keep y exception catch
2 catchpoint keep y exception throw
3 catchpoint keep y exception rethrow
This comment in the code seems telling:
/* We need to reset 'type' in order for code in breakpoint.c to do
the right thing. */
cp->type = bp_breakpoint;
It kind of suggests that the reason catchpoints end up shown as
breakpoints was that it was easier to implement them that way, rather
than a desired property.
This commit fixes things up to make it possible to have bp_catch
breakpoints have software/hardware breakpoint locations, thus
eliminating the need for that hack:
- redo breakpoint_address_is_meaningful in terms of the location's
type rather than breakpoint type.
- teach bpstat_what about stepping over the catchpoint locations.
- install a allocate_location method for "catch catch/throw/rethrow",
one that forces the location type.
Note that this also reverts the gdb hunk from:
commit 2a8be20359dba9cc684fd3ffa222d985399f3b18
Commit: Tom Tromey <tom@tromey.com>
CommitDate: Sat Oct 6 22:17:45 2018 -0600
Fix Python gdb.Breakpoint.location crash
because now "catch throw" catchpoints hit the
if (obj->bp->type != bp_breakpoint)
Py_RETURN_NONE;
check above, and, adjusts the testcase to no longer expect to see the
catchpoint in the gdb.breakpoints() list.
(Note: might make sense to do the same to Ada exception catchpoints.)
gdb/ChangeLog:
2019-07-09 Pedro Alves <palves@redhat.com>
* break-catch-throw.c (print_one_exception_catchpoint): Skip the
"addr" field.
(allocate_location_exception_catchpoint): New.
(handle_gnu_v3_exceptions): Don't reset 'type' to bp_breakpoint.
(initialize_throw_catchpoint_ops): Install
allocate_location_exception_catchpoint as allocate_location
method.
* breakpoint.c (bpstat_what) <bp_catch>: Set action to
BPSTAT_WHAT_SINGLE if not stopping and the location's type is not
bp_loc_other.
(breakpoint_address_is_meaningful): Delete.
(bl_address_is_meaningful): New.
(breakpoint_locations_match): Adjust comment.
(bp_location_from_bp_type): New, factored out of...
(bp_location::bp_location(breakpoint *)): ... this.
(bp_location::bp_location(breakpoint *, bp_loc_type)): New,
factored out of...
(bp_location::bp_location(breakpoint *)): ... this. Reimplement.
(bp_loc_is_permanent): Use bl_address_is_meaningful instead of
breakpoint_address_is_meaningful.
(bp_locations_compare): Adjust comment.
(update_global_location_list): Use bl_address_is_meaningful
instead of breakpoint_address_is_meaningful.
* breakpoint.h (bp_location::bp_location(breakpoint *)): New
explicit.
(bp_location::bp_location(breakpoint *, bp_loc_type)): Declare.
* python/py-breakpoint.c (bppy_get_location): No longer check
whether location is null.
gdb/doc/ChangeLog:
2019-07-09 Pedro Alves <palves@redhat.com>
* gdb.texinfo (C++ Exception GDB/MI Catchpoint Commands): Adjust
examples to show type=catchpoint instead of type=breakpoint and an
address.
gdb/testsuite/ChangeLog:
2019-07-09 Pedro Alves <palves@redhat.com>
* gdb.cp/catch-multi-stdlib.exp: Adjust expected "info
breakpoints" output.
* gdb.cp/exception.exp: Adjust expected "info breakpoints" output.
* gdb.python/py-breakpoint.exp: No longer expect that "catch
throw" creates breakpoint.
* gdb.mi/mi-catch-cpp-exceptions.exp (setup_catchpoint): Expect
'type="catchpoint"'.
|
|
A few spots in py-breakpoint.c acquire the GIL manually. However,
because these spots generate events, and because events are expected
to be arbitrary gdb-flavored Python code, it's important to use
gdbpy_enter instead, in order to ensure that the other gdb-related
Python globals are set correctly.
This patch makes this change. Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-06-10 Tom Tromey <tom@tromey.com>
* python/py-breakpoint.c (gdbpy_breakpoint_created)
(gdbpy_breakpoint_deleted, gdbpy_breakpoint_modified): Use
gdbpy_enter.
|
|
This makes exception handling more efficient in a few spots, through
the use of const- and rvalue-references.
I wrote this patch by commenting out the gdb_exception copy
constructor and then examining the resulting error messages one by
one, introducing the use of std::move where appropriate.
gdb/ChangeLog
2019-04-25 Tom Tromey <tromey@adacore.com>
* xml-support.c (struct gdb_xml_parser) <set_error>: Take an
rvalue reference.
(gdb_xml_start_element_wrapper, gdb_xml_end_element_wrapper)
(gdb_xml_parser::parse): Use std::move.
* python/python-internal.h (gdbpy_convert_exception): Take a const
reference.
* python/py-value.c (valpy_getitem, valpy_nonzero): Use
std::move.
* python/py-utils.c (gdbpy_convert_exception): Take a const
reference.
* python/py-inferior.c (infpy_write_memory, infpy_search_memory):
Use std::move.
* python/py-breakpoint.c (bppy_set_condition, bppy_set_commands):
Use std::move.
* mi/mi-main.c (mi_print_exception): Take a const reference.
* main.c (handle_command_errors): Take a const reference.
* linespec.c (parse_linespec): Use std::move.
* infcall.c (run_inferior_call): Use std::move.
(call_function_by_hand_dummy): Use std::move.
* exec.c (try_open_exec_file): Use std::move.
* exceptions.h (exception_print, exception_fprintf)
(exception_print_same): Update.
* exceptions.c (print_exception, exception_print)
(exception_fprintf, exception_print_same): Change parameters to
const reference.
* event-top.c (gdb_rl_callback_read_char_wrapper): Update.
* common/new-op.c: Use std::move.
* common/common-exceptions.h (struct gdb_exception): Add move
constructor.
(struct gdb_exception_error, struct gdb_exception_quit, struct
gdb_quit_bad_alloc): Change constructor to move constructor.
(throw_exception): Change parameter to rvalue reference.
* common/common-exceptions.c (throw_exception): Take rvalue
reference.
* cli/cli-interp.c (safe_execute_command): Use std::move.
* breakpoint.c (insert_bp_location, location_to_sals): Use
std::move.
|
|
Now that gdb_exception has a constructor, there's no need for
exception_none. This patch removes it.
gdb/ChangeLog
2019-04-25 Tom Tromey <tromey@adacore.com>
* xml-support.c (gdb_xml_parser::gdb_xml_parser): Update.
* python/py-value.c (valpy_getitem, valpy_nonzero): Update.
* python/py-inferior.c (infpy_write_memory, infpy_search_memory):
Update.
* python/py-breakpoint.c (bppy_set_condition, bppy_set_commands):
Update.
* mi/mi-interp.c (mi_interp::exec): Update.
* linespec.c (parse_linespec): Update.
* infcall.c (run_inferior_call): Update.
* guile/scm-value.c (gdbscm_value_to_lazy_string): Update.
* guile/scm-symbol.c (gdbscm_lookup_symbol)
(gdbscm_lookup_global_symbol): Update.
* guile/scm-param.c (gdbscm_parameter_value): Update.
* guile/scm-frame.c (gdbscm_frame_read_register)
(gdbscm_frame_read_var): Update.
* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Update.
* exec.c (try_open_exec_file): Update.
* event-top.c (gdb_rl_callback_read_char_wrapper_noexcept)
(gdb_rl_callback_handler): Update.
* common/common-exceptions.h (exception_none): Don't declare.
* common/common-exceptions.c (exception_none): Don't define.
(struct catcher) <exception>: Update.
* cli/cli-interp.c (safe_execute_command): Update.
* breakpoint.c (insert_bp_location, location_to_sals): Update.
|
|
This renames the gdb exception types. The old types were only needed
due to the macros in common-exception.h that are now gone.
The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem
needed, so this patch removes it entirely.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL):
Remove.
(gdb_exception_error): Rename from
gdb_exception_RETURN_MASK_ERROR.
(gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT.
(gdb_quit_bad_alloc): Update.
* aarch64-tdep.c: Update.
* ada-lang.c: Update.
* ada-typeprint.c: Update.
* ada-valprint.c: Update.
* amd64-tdep.c: Update.
* arch-utils.c: Update.
* break-catch-throw.c: Update.
* breakpoint.c: Update.
* btrace.c: Update.
* c-varobj.c: Update.
* cli/cli-cmds.c: Update.
* cli/cli-interp.c: Update.
* cli/cli-script.c: Update.
* common/common-exceptions.c: Update.
* common/new-op.c: Update.
* common/selftest.c: Update.
* compile/compile-c-symbols.c: Update.
* compile/compile-cplus-symbols.c: Update.
* compile/compile-object-load.c: Update.
* compile/compile-object-run.c: Update.
* completer.c: Update.
* corelow.c: Update.
* cp-abi.c: Update.
* cp-support.c: Update.
* cp-valprint.c: Update.
* darwin-nat.c: Update.
* disasm-selftests.c: Update.
* dtrace-probe.c: Update.
* dwarf-index-cache.c: Update.
* dwarf-index-write.c: Update.
* dwarf2-frame-tailcall.c: Update.
* dwarf2-frame.c: Update.
* dwarf2loc.c: Update.
* dwarf2read.c: Update.
* eval.c: Update.
* event-loop.c: Update.
* event-top.c: Update.
* exec.c: Update.
* f-valprint.c: Update.
* fbsd-tdep.c: Update.
* frame-unwind.c: Update.
* frame.c: Update.
* gdbtypes.c: Update.
* gnu-v3-abi.c: Update.
* guile/guile-internal.h: Update.
* guile/scm-block.c: Update.
* guile/scm-breakpoint.c: Update.
* guile/scm-cmd.c: Update.
* guile/scm-disasm.c: Update.
* guile/scm-frame.c: Update.
* guile/scm-lazy-string.c: Update.
* guile/scm-math.c: Update.
* guile/scm-param.c: Update.
* guile/scm-ports.c: Update.
* guile/scm-pretty-print.c: Update.
* guile/scm-symbol.c: Update.
* guile/scm-symtab.c: Update.
* guile/scm-type.c: Update.
* guile/scm-value.c: Update.
* i386-linux-tdep.c: Update.
* i386-tdep.c: Update.
* inf-loop.c: Update.
* infcall.c: Update.
* infcmd.c: Update.
* infrun.c: Update.
* jit.c: Update.
* language.c: Update.
* linespec.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-tdep.c: Update.
* linux-thread-db.c: Update.
* main.c: Update.
* mi/mi-cmd-break.c: Update.
* mi/mi-cmd-stack.c: Update.
* mi/mi-interp.c: Update.
* mi/mi-main.c: Update.
* objc-lang.c: Update.
* p-valprint.c: Update.
* parse.c: Update.
* ppc-linux-tdep.c: Update.
* printcmd.c: Update.
* python/py-arch.c: Update.
* python/py-breakpoint.c: Update.
* python/py-cmd.c: Update.
* python/py-finishbreakpoint.c: Update.
* python/py-frame.c: Update.
* python/py-framefilter.c: Update.
* python/py-gdb-readline.c: Update.
* python/py-inferior.c: Update.
* python/py-infthread.c: Update.
* python/py-lazy-string.c: Update.
* python/py-linetable.c: Update.
* python/py-objfile.c: Update.
* python/py-param.c: Update.
* python/py-prettyprint.c: Update.
* python/py-progspace.c: Update.
* python/py-record-btrace.c: Update.
* python/py-record.c: Update.
* python/py-symbol.c: Update.
* python/py-type.c: Update.
* python/py-unwind.c: Update.
* python/py-utils.c: Update.
* python/py-value.c: Update.
* python/python.c: Update.
* record-btrace.c: Update.
* record-full.c: Update.
* remote-fileio.c: Update.
* remote.c: Update.
* riscv-tdep.c: Update.
* rs6000-aix-tdep.c: Update.
* rs6000-tdep.c: Update.
* rust-exp.y: Update.
* rust-lang.c: Update.
* s390-tdep.c: Update.
* selftest-arch.c: Update.
* solib-dsbt.c: Update.
* solib-frv.c: Update.
* solib-spu.c: Update.
* solib-svr4.c: Update.
* solib.c: Update.
* sparc64-linux-tdep.c: Update.
* stack.c: Update.
* symfile-mem.c: Update.
* symmisc.c: Update.
* target.c: Update.
* thread.c: Update.
* top.c: Update.
* tracefile-tfile.c: Update.
* tui/tui.c: Update.
* typeprint.c: Update.
* unittests/cli-utils-selftests.c: Update.
* unittests/parse-connection-spec-selftests.c: Update.
* valops.c: Update.
* valprint.c: Update.
* value.c: Update.
* varobj.c: Update.
* windows-nat.c: Update.
* x86-linux-nat.c: Update.
* xml-support.c: Update.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* gdbreplay.c: Update.
* linux-low.c: Update.
* server.c: Update.
|
|
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
|
|
This removes all the remainings spots I could find that work around
issues in Python 2.4 and 2.5.
I don't have a good way to test that Python 2.6 still works.
Tested by the buildbot.
gdb/ChangeLog
2019-02-27 Tom Tromey <tromey@adacore.com>
* config.in, configure: Rebuild.
* configure.ac (HAVE_LIBPYTHON2_4, HAVE_LIBPYTHON2_5): Never
define.
* python/py-value.c: Remove Python 2.4 workaround.
* python/py-utils.c (gdb_pymodule_addobject): Remove Python 2.4
workaround.
* python/py-type.c (convert_field, gdbpy_initialize_types): Remove
Python 2.4 workaround.
* python/python-internal.h: Remove Python 2.4 comment.
(Py_ssize_t): Don't define.
(PyVarObject_HEAD_INIT, Py_TYPE): Don't define.
(gdb_Py_DECREF): Remove Python 2.4 workaround.
(gdb_PyObject_GetAttrString, PyObject_GetAttrString): Remove.
(gdb_PyObject_HasAttrString, PyObject_HasAttrString): Remove.
* python/python.c (do_start_initialization): Remove Python 2.4
workaround.
* python/py-prettyprint.c (class dummy_python_frame): Remove.
(print_children): Remove Python 2.4 workaround.
* python/py-inferior.c (buffer_procs): Remove Python 2.4
workaround.
(CHARBUFFERPROC_NAME): Remove.
* python/py-breakpoint.c (gdbpy_initialize_breakpoints): Remove
Python 2.4 workaround.
gdb/testsuite/ChangeLog
2019-02-27 Tom Tromey <tromey@adacore.com>
* lib/gdb.exp (skip_python_tests_prompt): Don't check for Python
2.4.
* gdb.python/py-finish-breakpoint.exp: Remove Python 2.4
workaround.
gdb/ChangeLog
2019-02-27 Tom Tromey <tromey@adacore.com>
* config.in, configure: Rebuild.
* configure.ac (HAVE_LIBPYTHON2_4, HAVE_LIBPYTHON2_5): Never
define.
* python/py-value.c: Remove Python 2.4 workaround.
* python/py-utils.c (gdb_pymodule_addobject): Remove Python 2.4
workaround.
* python/py-type.c (convert_field, gdbpy_initialize_types): Remove
Python 2.4 workaround.
* python/python-internal.h: Remove Python 2.4 comment.
(Py_ssize_t): Don't define.
(PyVarObject_HEAD_INIT, Py_TYPE): Don't define.
(gdb_Py_DECREF): Remove Python 2.4 workaround.
(gdb_PyObject_GetAttrString, PyObject_GetAttrString): Remove.
(gdb_PyObject_HasAttrString, PyObject_HasAttrString): Remove.
* python/python.c (do_start_initialization): Remove Python 2.4
workaround.
* python/py-prettyprint.c (class dummy_python_frame): Remove.
(print_children): Remove Python 2.4 workaround.
* python/py-inferior.c (buffer_procs): Remove Python 2.4
workaround.
(CHARBUFFERPROC_NAME): Remove.
* python/py-breakpoint.c (gdbpy_initialize_breakpoints): Remove
Python 2.4 workaround.
|
|
This fixes a few minor style issues I found in gdb/python: some
unnecessary casts, the removal of an unnecessary local variable, and
one instance of incorrect formatting.
Tested by rebuilding and re-running gdb.python.
gdb/ChangeLog
2019-01-02 Tom Tromey <tom@tromey.com>
* python/py-inferior.c (gdbpy_initialize_inferior): Fix
indentation.
* python/py-frame.c (frapy_older): Remove cast.
(frapy_newer): Likewise.
* python/py-breakpoint.c (local_setattro): Remove cast.
* python/py-arch.c (archpy_name): Remove local variable.
* python/py-type.c (gdbpy_lookup_type): Remove cast.
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
I noticed a few places were converting a gdb exception to a Python
exception "by hand". It's better to use the existing
gdbpy_convert_exception helper function, as this handles memory errors
correctly, and in the future may be enhanced in other ways.
gdb/ChangeLog
2018-12-27 Tom Tromey <tom@tromey.com>
* python/py-value.c (convert_value_from_python): Use
gdbpy_convert_exception.
* python/py-param.c (parmpy_init): Use gdbpy_convert_exception.
* python/py-cmd.c (cmdpy_init): Use gdbpy_convert_exception.
* python/py-breakpoint.c (bppy_init): Use
gdbpy_convert_exception.
|
|
This changes python_string_to_unicode,
python_string_to_target_python_string, and
host_string_to_python_string to return gdbpy_ref.
gdb/ChangeLog
2018-11-04 Tom Tromey <tom@tromey.com>
* python/python.c (gdbpy_parameter_value): Update.
* python/python-internal.h (python_string_to_unicode)
(python_string_to_target_python_string)
(host_string_to_python_string): Return gdbpy_ref.
* python/py-utils.c (python_string_to_unicode)
(unicode_to_encoded_python_string)
(unicode_to_target_python_string)
(python_string_to_target_string)
(python_string_to_target_python_string): Return gdbpy_ref.
(python_string_to_host_string): Update.
(host_string_to_python_string): Return gdbpy_ref.
* python/py-symtab.c (stpy_get_filename, stpy_get_producer)
(stpy_fullname): Update.
* python/py-progspace.c (pspy_get_filename, pspy_solib_name):
Update.
* python/py-prettyprint.c (print_string_repr): Update.
* python/py-objfile.c (objfpy_get_filename, objfpy_get_username)
(objfpy_get_build_id): Update.
* python/py-breakpoint.c (bppy_get_location)
(bppy_get_expression, bppy_get_condition, bppy_get_commands):
Update.
|
|
I noticed today that gdb.Breakpoint.location will crash when applied
to a catchpoint made with "catch throw".
The bug is that "catch throw" makes a breakpoint that is of type
bp_breakpoint, but which does not have a location.
Regression tested on x86-64 Fedora 28.
gdb/ChangeLog
2018-10-06 Tom Tromey <tom@tromey.com>
* python/py-breakpoint.c (bppy_get_location): Handle a
bp_breakpoint without a location.
gdb/testsuite/ChangeLog
2018-10-06 Tom Tromey <tom@tromey.com>
* gdb.python/py-breakpoint.exp (check_last_event): Check location
of a "throw" catchpoint.
|
|
This patch holds all the straightforward unused variable deletions.
gdb/ChangeLog
2018-07-22 Tom Tromey <tom@tromey.com>
* guile/scm-value.c (gdbscm_value_call): Remove unused variables.
* guile/scm-math.c (vlscm_unop_gdbthrow, vlscm_binop_gdbthrow)
(vlscm_convert_typed_value_from_scheme): Remove unused variable.
* buildsym-legacy.c (get_macro_table): Remove unused variable.
* stack.c (frame_apply_level_command): Remove unused variable.
* tic6x-tdep.c (tic6x_push_dummy_call): Remove unused variable.
* sparc64-tdep.c (adi_examine_command): Remove unused variable.
* rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Remove
unused variable.
* nios2-tdep.c (nios2_push_dummy_call): Remove unused variable.
* mep-tdep.c (mep_push_dummy_call): Remove unused variable.
* ada-lang.c (ada_lookup_symbol_list_worker): Remove unused
variable.
* amd64-tdep.c (amd64_supply_xsave): Remove unused variable.
* arm-tdep.c (arm_record_data_proc_misc_ld_str): Remove unused
variable.
* breakpoint.c (check_no_tracepoint_commands, update_watchpoint):
Remove unused variable.
* cli/cli-script.c (recurse_read_control_structure): Remove unused
variable.
* common/tdesc.c (print_xml_feature::visit): Remove unused
variable.
* compile/compile-object-load.c (store_regs): Remove unused
variables.
* complaints.c (clear_complaints): Remove unused variable.
* corelow.c (core_target_open): Remove unused variable.
* fbsd-tdep.c (fbsd_core_info_proc_status): Remove unused
variable.
* guile/scm-frame.c (gdbscm_frame_read_var): Remove unused
variable.
* guile/scm-symtab.c (stscm_print_sal_smob): Remove unused
variable.
* guile/scm-type.c (gdbscm_field_baseclass_p): Remove unused
variable.
* guile/scm-utils.c (gdbscm_parse_function_args): Remove unused
variable.
* hppa-tdep.c (hppa_stub_frame_unwind_cache): Remove unused
variable.
* ia64-tdep.c (examine_prologue): Remove unused variable.
* infcall.c (run_inferior_call): Remove unused variable.
* inferior.c (exit_inferior): Remove unused variable.
* infrun.c (infrun_thread_ptid_changed): Remove unused variable.
* linespec.c (decode_line_2): Remove unused variable.
* linux-nat.c (super_close): Remove.
* linux-tdep.c (linux_info_proc): Remove unused variable.
* mi/mi-main.c (mi_execute_command): Remove unused variable.
* microblaze-linux-tdep.c (microblaze_linux_sigtramp_cache):
Remove unused variable.
* parse.c (find_minsym_type_and_address): Remove unused variable.
* printcmd.c (info_symbol_command, printf_floating): Remove unused
variable.
* python/py-breakpoint.c (bppy_set_commands): Remove unused
variable.
* python/py-unwind.c (unwind_infopy_dealloc): Remove unused
variables.
* record-btrace.c (record_btrace_target::store_registers): Remove
unused variable.
(cmd_show_record_btrace_cpu): Remove unused variable.
* riscv-tdep.c (riscv_register_reggroup_p)
(riscv_push_dummy_call, riscv_return_value): Remove unused
variable.
* rust-exp.y (literal): Remove unused variable.
* rust-lang.c (rust_evaluate_subexp) <OP_RUST_ARARAY>: Remove
unused variable.
<STRUCTOP_ANONYMOUS>: Likewise.
* s390-linux-tdep.c (s390_linux_init_abi_31)
(s390_linux_init_abi_64): Remove unused variable.
* ser-ming2.c (ser_windows_read_prim, pipe_select_thread)
(file_select_thread, net_windows_open, _initialize_ser_windows):
Remove unused variables.
* symtab.c (find_pc_sect_line): Remove unused variable.
* target-memory.c (compute_garbled_blocks): Remove unused
variable.
(target_write_memory_blocks): Remove unused variable.
* target.c (target_stack::unpush): Remove unused variables.
* tracepoint.c (start_tracing, all_tracepoint_actions)
(merge_uploaded_trace_state_variables)
(print_one_static_tracepoint_marker): Remove unused variable.
* unittests/basic_string_view/element_access/char/1.cc (test01):
Remove unused variable.
* windows-nat.c (windows_continue, windows_add_all_dlls)
(do_initial_windows_stuff, windows_nat_target::create_inferior):
Remove unused variables.
|
|
This changes the Python API so that breakpoint commands can be set by
writing to the "commands" attribute.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR python/22731:
* NEWS: Mention that breakpoint commands are writable.
* python/py-breakpoint.c (bppy_set_commands): New function.
(breakpoint_object_getset) <"commands">: Use it.
doc/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR python/22731:
* python.texi (Breakpoints In Python): Mention that "commands" is
writable.
testsuite/ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
PR python/22731:
* gdb.python/py-breakpoint.exp: Test setting breakpoint commands.
|
|
This converts observers from using a special source-generating script
to be plain C++. This version of the patch takes advantage of C++11
by using std::function and variadic templates; incorporates Pedro's
patches; and renames the header file to "observable.h" (this change
eliminates the need for a clean rebuild).
Note that Pedro's patches used a template lambda in tui-hooks.c, but
this failed to compile on some buildbot instances (presumably due to
differing C++ versions); I replaced this with an ordinary template
function.
Regression tested on the buildbot.
gdb/ChangeLog
2018-03-19 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* unittests/observable-selftests.c: New file.
* common/observable.h: New file.
* observable.h: New file.
* ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c,
arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c,
breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c,
corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c,
extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c,
infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c,
linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c,
mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c,
ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c,
python/py-breakpoint.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c,
record-btrace.c, record-full.c, record.c, regcache.c, remote.c,
riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c,
spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c,
symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c,
tui/tui-interp.c, valops.c: Update all users.
* tui/tui-hooks.c (tui_bp_created_observer)
(tui_bp_deleted_observer, tui_bp_modified_observer)
(tui_inferior_exit_observer, tui_before_prompt_observer)
(tui_normal_stop_observer, tui_register_changed_observer):
Remove.
(tui_observers_token): New global.
(attach_or_detach, tui_attach_detach_observers): New functions.
(tui_install_hooks, tui_remove_hooks): Use
tui_attach_detach_observers.
* record-btrace.c (record_btrace_thread_observer): Remove.
(record_btrace_thread_observer_token): New global.
* observer.sh: Remove.
* observer.c: Rename to observable.c.
* observable.c (namespace gdb_observers): Define new objects.
(observer_debug): Move into gdb_observers namespace.
(struct observer, struct observer_list, xalloc_observer_list_node)
(xfree_observer_list_node, generic_observer_attach)
(generic_observer_detach, generic_observer_notify): Remove.
(_initialize_observer): Update.
Don't include observer.inc.
* Makefile.in (generated_files): Remove observer.h, observer.inc.
(clean mostlyclean): Likewise.
(observer.h, observer.inc): Remove targets.
(SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c.
(COMMON_SFILES): Use observable.c, not observer.c.
* .gitignore: Remove observer.h.
gdb/doc/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* observer.texi: Remove.
gdb/testsuite/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.gdb/observer.exp: Remove.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files
|
|
In Python 3, the 'p' format specifier can be passed to
PyArg_ParseTupleAndKeywords to test the argument for truth and convert
it to a boolean value (the p stands for predicate). However, it is not
available in Python 2, causing this error:
Traceback (most recent call last):
File "test.py", line 1, in <module>
b1 = gdb.Breakpoint("foo", qualified=False)
TypeError: argument 10 (impossible<bad format char>)
This patch changes it to the 'O' specifier, which returns the Python
object passed in without transformation, and uses PyObject_IsTrue on it.
This is what is done for the other boolean parameters of this function
(internal and temporary).
This fixes the test gdb.python/py-breakpoint.exp for Python 2.
gdb/ChangeLog:
* python/py-breakpoint.c (bppy_init): Use 'O' format specifier
for "qualified" and use PyObject_IsTrue.
|
|
This patch adds the possibility to pass a qualified=True|False parameter
when creating a breakpoint in Python. It is equivalent to using
-qualified in a linespec. The parameter actually accepts any Python
value, and converts it to boolean using Python's standard rules for
that (https://docs.python.org/3/library/stdtypes.html#truth).
Unlike the -source/-line/-function/-label parameters, it is possible to
use -qualified with a "normal" (non-explicit) linespec. Therefore, it
is possible (unlike these other parameters) to use this new parameter
along with the spec parameter.
I updated the py-breakpoint.exp test. To be able to test multiple
locations using a namespace, I had to switch the test case to compile as
C++. If we really wanted to, we could run it as both C and C++, but
omit the C++-specific parts when running it as C.
gdb/ChangeLog:
* location.h (string_to_event_location): Add match_type
parameter.
* location.c (string_to_event_location): Likewise.
* python/py-breakpoint.c (bppy_init): Handle qualified
parameter.
gdb/doc/ChangeLog:
* python.texi (Manipulating breakpoints using Python): Document
qualified parameter to gdb.Breakpoint.
gdb/testsuite/ChangeLog:
* gdb.python/py-breakpoint.c (foo_ns::multiply): New function.
* gdb.python/py-breakpoint.exp: Compile the test case as c++,
call test_bkpt_qualified.
(test_bkpt_qualified): New proc.
|
|
This introduces several new keywords to the bppy_init constructor.
The spec parameter is now optional but mutually exclusive to the
explicit keywords source, label, function and line.
gdb/ChangeLog
2017-12-07 Phil Muldoon <pmuldoon@redhat.com>
* python/py-breakpoint.c (bppy_init): Use string_to_event_location
over basic location code. Implement explicit location keywords.
(bppy_init_validate_args): New function.
* NEWS: Document Python explicit breakpoint locations.
doc/ChangeLog
2017-12-07 Phil Muldoon <pmuldoon@redhat.com>
* python.texi (Breakpoints In Python): Add text relating
to allowed explicit locations and keywords in gdb.Breakpoints.
testsuite/ChangeLog
2017-12-07 Phil Muldoon <pmuldoon@redhat.com>
* gdb.python/py-breakpoint.exp (test_bkpt_explicit_loc): Add new
tests for explicit locations.
|
|
This patch removes some unused variables, found with -Wunused. I have
not removed everything reported by -Wunused, because some expressions
such as
struct type *arg_type = check_typedef (value_type);
in bfin-tdep.c could have an unexpected but important side-effect. I
removed others that I considered more low-risk, such as:
struct gdbarch *gdbarch = get_objfile_arch (objfile);
I tested building with Python 2/Python 3/no Python, with/without expat,
with/without libipt and with/without babeltrace.
gdb/ChangeLog:
* ada-lang.c (ada_collect_symbol_completion_matches): Remove
unused variables.
(ada_is_redundant_range_encoding): Likewise.
* ada-varobj.c (ada_varobj_get_value_of_array_variable):
Likewise.
* alpha-tdep.c (alpha_software_single_step): Likewise.
* arm-tdep.c (_initialize_arm_tdep): Likewise.
* auto-load.c (info_auto_load_cmd): Likewise.
* break-catch-syscall.c (insert_catch_syscall): Likewise.
(remove_catch_syscall): Likewise.
* breakpoint.c (condition_completer): Likewise.
(clear_command): Likewise.
(update_breakpoint_locations): Likewise.
* btrace.c (btrace_disable): Likewise.
(btrace_teardown): Likewise.
(btrace_maint_update_pt_packets): Likewise.
(maint_btrace_clear_cmd): Likewise.
* cli/cli-decode.c (lookup_cmd_1): Likewise.
(lookup_cmd_composition): Likewise.
* cli/cli-dump.c (scan_filename): Likewise.
(restore_command): Likewise.
* compile/compile-loc2c.c (compute_stack_depth): Likewise.
* compile/compile-object-load.c (compile_object_load): Likewise.
* compile/compile-object-run.c (compile_object_run): Likewise.
* compile/compile.c (compile_to_object): Likewise.
* completer.c (filename_completer): Likewise.
(complete_files_symbols): Likewise.
(complete_expression): Likewise.
* corelow.c (core_open): Likewise.
* ctf.c (ctf_start): Likewise.
(ctf_write_status): Likewise.
(ctf_write_uploaded_tsv): Likewise.
(ctf_write_definition_end): Likewise.
(ctf_open_dir): Likewise.
(ctf_xfer_partial): Likewise.
(ctf_trace_find): Likewise.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Likewise.
* dwarf2loc.c (allocate_piece_closure): Likewise.
(indirect_pieced_value): Likewise.
(dwarf2_evaluate_loc_desc_full): Likewise.
* dwarf2read.c (dw2_expand_marked_cus): Likewise.
(dw2_expand_symtabs_matching): Likewise.
(dw2_map_symbol_filenames): Likewise.
(read_and_check_comp_unit_head): Likewise.
(read_cutu_die_from_dwo): Likewise.
(lookup_dwo_unit): Likewise.
(read_comp_units_from_section): Likewise.
(dwarf2_compute_name): Likewise.
(handle_DW_AT_stmt_list): Likewise.
(create_cus_hash_table): Likewise.
(create_dwp_v2_section): Likewise.
(dwarf2_rnglists_process): Likewise.
(dwarf2_ranges_process): Likewise.
(dwarf2_record_block_ranges): Likewise.
(is_vtable_name): Likewise.
(read_formatted_entries): Likewise.
(skip_form_bytes): Likewise.
* elfread.c (elf_symtab_read): Likewise.
* exec.c (exec_file_command): Likewise.
* f-valprint.c (f_val_print): Likewise.
(info_common_command_for_block): Likewise.
* guile/guile.c (initialize_scheme_side): Likewise.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Likewise.
* guile/scm-cmd.c (cmdscm_completer): Likewise.
(gdbscm_register_command_x): Likewise.
* guile/scm-frame.c (gdbscm_frame_read_var): Likewise.
* guile/scm-param.c (gdbscm_parameter_value): Likewise.
* guile/scm-ports.c (file_port_magic): Likewise.
* guile/scm-pretty-print.c (ppscm_search_pp_list): Likewise.
(ppscm_pretty_print_one_value): Likewise.
(ppscm_print_children): Likewise.
* guile/scm-string.c (gdbscm_string_to_argv): Likewise.
* guile/scm-symtab.c (gdbscm_sal_symtab): Likewise.
* guile/scm-type.c (gdbscm_type_next_field_x): Likewise.
* guile/scm-utils.c (gdbscm_parse_function_args): Likewise.
* i386-tdep.c (i386_register_reggroup_p): Likewise.
* infcmd.c (run_command_1): Likewise.
(until_next_fsm_clean_up): Likewise.
* linespec.c (linespec_complete): Likewise.
(find_label_symbols): Likewise.
* m2-valprint.c (m2_val_print): Likewise.
* memattr.c (require_user_regions): Likewise.
(lookup_mem_region): Likewise.
(disable_mem_command): Likewise.
(mem_delete): Likewise.
* mep-tdep.c (mep_register_name): Likewise.
(mep_analyze_prologue): Likewise.
* mi/mi-cmd-file.c (mi_cmd_file_list_shared_libraries): Likewise.
* mi/mi-interp.c (mi_on_sync_execution_done): Likewise.
* mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise.
* microblaze-linux-tdep.c (microblaze_linux_init_abi): Likewise.
* minidebug.c (lzma_open): Likewise.
* minsyms.c (lookup_minimal_symbol): Likewise.
* mips-linux-tdep.c (mips64_fill_fpregset): Likewise.
* mips-tdep.c (mips_stub_frame_sniffer): Likewise.
(mips_o64_return_value): Likewise.
(mips_single_step_through_delay): Likewise.
(_initialize_mips_tdep): Likewise.
* nios2-tdep.c (nios2_push_dummy_call): Likewise.
(nios2_software_single_step): Likewise.
* parse.c (find_minsym_type_and_address): Likewise.
* psymtab.c (psym_relocate): Likewise.
* python/py-breakpoint.c (bppy_get_commands): Likewise.
(gdbpy_breakpoint_modified): Likewise.
* python/py-infevents.c (create_inferior_call_event_object):
Likewise.
* python/py-record-btrace.c (btpy_list_item): Likewise.
* python/py-type.c (typy_str): Likewise.
* python/py-value.c (valpy_call): Likewise.
* python/python.c (do_start_initialization): Likewise.
* record-btrace.c (record_btrace_insn_history_range): Likewise.
(record_btrace_call_history_range): Likewise.
(record_btrace_record_method): Likewise.
(record_btrace_xfer_partial): Likewise.
(btrace_get_frame_function): Likewise.
* record-full.c (record_full_open): Likewise.
* record.c (get_context_size): Likewise.
* registry.h (DEFINE_REGISTRY): Likewise.
* remote-fileio.c (remote_fileio_request): Likewise.
* remote.c (remote_update_thread_list): Likewise.
(remote_check_symbols): Likewise.
(remote_commit_resume): Likewise.
(remote_interrupt): Likewise.
(remote_insert_breakpoint): Likewise.
(compare_sections_command): Likewise.
* rust-exp.y (super_name): Likewise.
(lex_string): Likewise.
(convert_ast_to_type): Likewise.
(convert_ast_to_expression): Likewise.
* rust-lang.c (rust_print_struct_def): Likewise.
(rust_print_type): Likewise.
(rust_evaluate_subexp): Likewise.
* rx-tdep.c (rx_register_type): Likewise.
* ser-event.c (serial_event_clear): Likewise.
* serial.c (serial_open): Likewise.
* spu-tdep.c (spu_overlay_new_objfile): Likewise.
* symfile.c (section_is_overlay): Likewise.
(overlay_unmapped_address): Likewise.
(overlay_mapped_address): Likewise.
(simple_overlay_update_1): Likewise.
(simple_overlay_update): Likewise.
* symtab.c (symbol_find_demangled_name): Likewise.
(search_symbols): Likewise.
* target-descriptions.c (tdesc_predefined_type): Likewise.
* target.c (target_commit_resume): Likewise.
* thread.c (print_selected_thread_frame): Likewise.
* top.c (new_ui_command): Likewise.
(gdb_readline_no_editing): Likewise.
* tracefile-tfile.c (tfile_open): Likewise.
* tracepoint.c (create_tsv_from_upload): Likewise.
* utils.c (quit): Likewise.
(defaulted_query): Likewise.
* valarith.c (value_concat): Likewise.
* xml-syscall.c (xml_list_syscalls_by_group): Likewise.
* xml-tdesc.c (target_fetch_description_xml): Likewise.
* xtensa-tdep.c (xtensa_pseudo_register_read): Likewise.
(xtensa_pseudo_register_write): Likewise.
gdb/gdbserver/ChangeLog:
* regcache.c (registers_to_string): Remove unused variable.
|
|
This patch teaches GDB about setting breakpoints in all scopes
(namespaces and classes) by default.
Here's a contrived example:
(gdb) b func<tab>
(anonymous namespace)::A::function() Bn::(anonymous namespace)::B::function() function(int, int)
(anonymous namespace)::B::function() Bn::(anonymous namespace)::function() gdb::(anonymous namespace)::A::function()
(anonymous namespace)::B::function() const Bn::(anonymous namespace)::function(int, int) gdb::(anonymous namespace)::function()
(anonymous namespace)::function() Bn::B::func() gdb::(anonymous namespace)::function(int, int)
(anonymous namespace)::function(int, int) Bn::B::function() gdb::A::func()
A::func() Bn::func() gdb::A::function()
A::function() Bn::function() gdb::func()
B::func() Bn::function(int, int) gdb::function()
B::function() Bn::function(long) gdb::function(int, int)
B::function() const func() gdb::function(long)
B::function_const() const function()
(gdb) b function
Breakpoint 1 at 0x4005ce: function. (26 locations)
(gdb) b B::function<tab>
(anonymous namespace)::B::function() B::function() const Bn::B::function()
(anonymous namespace)::B::function() const B::function_const() const
B::function() Bn::(anonymous namespace)::B::function()
(gdb) b B::function
Breakpoint 1 at 0x40072c: B::function. (6 locations)
To get back the original behavior of interpreting the function name as
a fully-qualified name, you can use the new "-qualified" (or "-q")
option/flag (added by this commit). For example:
(gdb) b B::function
(anonymous namespace)::B::function() B::function() const Bn::B::function()
(anonymous namespace)::B::function() const B::function_const() const
B::function() Bn::(anonymous namespace)::B::function()
vs:
(gdb) b -qualified B::function
B::function() B::function() const B::function_const() const
I've chosen "-qualified" / "-q" because "-f" (for "full" or
"fully-qualified") is already taken for "-function".
Note: the "-qualified" option works with both linespecs and explicit
locations. I.e., these are equivalent:
(gdb) b -q func
(gdb) b -q -f func
and so are these:
(gdb) b -q filename.cc:func
(gdb) b -q -s filename.cc -f func
(gdb) b -s filename.cc -q -f func
(gdb) b -s filename.cc -f func -q
To better understand why I consider wild matching the better default,
consider what happens when we get to the point when _all_ of GDB is
wrapped under "namespace gdb {}". I have a patch series that does
that, and when I started debugging that GDB, I immediately became
frustrated. You'd have to write "b gdb::internal_error", "b
gdb::foo", "b gdb::bar", etc. etc., which gets annoying pretty
quickly. OTOH, consider how this makes it very easy to set
breakpoints in classes wrapped in anonymous namespaces. You just
don't think of them, GDB finds the symbols for you automatically.
(At the Cauldron a couple months ago, several people told me that they
run into a similar issue when debugging other C++ projects. One
example was when debugging LLVM, which puts all its code under the
"llvm" namespace.)
Implementation-wise, what the patch does is:
- makes C++ symbol name hashing only consider the last component of
a symbol name. (so that we can look up symbol names by
last-component name only).
- adds a C++ symbol name matcher for symbol_name_match_type::WILD,
which ignores missing leading specifiers / components.
- adjusts a few preexisting testsuite tests to use "-qualified" when
they mean it.
- adds new testsuite tests.
- adds unit tests.
Grows the gdb.linespec/ tests like this:
-# of expected passes 7823
+# of expected passes 8977
gdb/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
* NEWS: Mention that breakpoints on C++ functions are now set on
on all namespaces/classes by default, and mention "break
-qualified".
* ax-gdb.c (agent_command_1): Adjust to pass a
symbol_name_match_type to new_linespec_location.
* breakpoint.c (parse_breakpoint_sals): Adjust to
get_linespec_location's return type change.
(strace_marker_create_sals_from_location): Adjust to pass a
symbol_name_match_type to new_linespec_location.
(strace_marker_decode_location): Adjust to get_linespec_location's
return type change.
(strace_command): Adjust to pass a symbol_name_match_type to
new_linespec_location.
(LOCATION_HELP_STRING): Add paragraph about wildmatching, and
mention "-qualified".
* c-lang.c (cplus_language_defn): Install cp_search_name_hash.
* completer.c (explicit_location_match_type::MATCH_QUALIFIED): New
enumerator.
(complete_address_and_linespec_locations): New parameter
'match_type'. Pass it down.
(explicit_options): Add "-qualified".
(collect_explicit_location_matches): Pass the requested match type
to the linespec completers. Handle MATCH_QUALIFIED.
(location_completer): Handle "-qualified" combined with linespecs.
* cp-support.c (cp_search_name_hash): New.
(cp_symbol_name_matches_1): Implement wild matching for C++.
(cp_fq_symbol_name_matches): Reimplement.
(cp_get_symbol_name_matcher): Return different matchers depending
on the lookup name's match type.
(selftests::test_cp_symbol_name_matches): Add wild matching tests.
* cp-support.h (cp_search_name_hash): New declaration.
* dwarf2read.c
(selftests::dw2_expand_symtabs_matching::test_symbols): Add
symbols.
(test_dw2_expand_symtabs_matching_symbol): Add wild matching
tests.
* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Adjust to
pass a symbol_name_match_type to new_linespec_location.
* linespec.c (linespec_parse_basic): Lookup function symbols using
the parser's symbol name match type.
(convert_explicit_location_to_linespec): New
symbol_name_match_type parameter. Pass it down to
find_linespec_symbols.
(convert_explicit_location_to_sals): Pass the location's name
match type to convert_explicit_location_to_linespec.
(parse_linespec): New match_type parameter. Save it in the
parser.
(linespec_parser_new): Default to symbol_name_match_type::WILD.
(linespec_complete_function): New symbol_name_match_type
parameter. Use it.
(complete_linespec_component): Pass down the parser's recorded
name match type.
(linespec_complete_label): New symbol_name_match_type parameter.
Use it.
(linespec_complete): New symbol_name_match_type parameter. Save
it in the parser and pass it down. Adjust to
get_linespec_location's prototype change.
(find_function_symbols, find_linespec_symbols): New
symbol_name_match_type parameter. Pass it down instead of
assuming symbol_name_match_type::WILD.
* linespec.h (linespec_complete, linespec_complete_function)
(linespec_complete_label): New symbol_name_match_type parameter.
* location.c (event_location::linespec_location): Now a struct
linespec_location.
(EL_LINESPEC): Adjust.
(initialize_explicit_location): Default to
symbol_name_match_type::WILD.
(new_linespec_location): New symbol_name_match_type parameter.
Record it in the location.
(get_linespec_location): Now returns a struct linespec_location.
(new_explicit_location): Also copy func_name_match_type.
(explicit_to_string_internal)
(string_to_explicit_location): Handle "-qualified".
(copy_event_location): Adjust to LINESPEC_LOCATION type change.
Copy symbol_name_match_type fields.
(event_location_deleter::operator()): Adjust to LINESPEC_LOCATION
type change.
(event_location_to_string): Adjust to LINESPEC_LOCATION type
change. Handle "-qualfied".
(string_to_explicit_location): Handle "-qualified".
(string_to_event_location_basic): New symbol_name_match_type
parameter. Pass it down.
(string_to_event_location): Handle "-qualified".
* location.h (struct linespec_location): New.
(explicit_location::func_name_match_type): New field.
(new_linespec_location): Now returns a const linespec_location *.
(string_to_event_location_basic): New symbol_name_match_type
parameter.
(explicit_completion_info::saw_explicit_location_option): New
field.
* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Adjust to pass a
symbol_name_match_type to new_linespec_location.
* python/py-breakpoint.c (bppy_init): Likewise.
* python/python.c (gdbpy_decode_line): Likewise.
gdb/testsuite/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
* gdb.base/langs.exp: Use -qualified.
* gdb.cp/meth-typedefs.exp: Use -qualified, and add tests without
it.
* gdb.cp/namespace.exp: Use -qualified.
* gdb.linespec/cpcompletion.exp (overload-2, fqn, fqn-2)
(overload-3, template-overload, template-ret-type, const-overload)
(const-overload-quoted, anon-ns, ambiguous-prefix): New
procedures.
(test_driver): Call them.
* gdb.cp/save-bp-qualified.cc: New.
* gdb.cp/save-bp-qualified.exp: New.
* gdb.linespec/explicit.exp: Test -qualified.
* lib/completion-support.exp (completion::explicit_opts_list): Add
"-qualified".
* lib/gdb.exp (gdb_breakpoint): Handle "qualified".
gdb/doc/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Linespec Locations): Document how "function" is
interpreted in C++ and Ada. Document "-qualified".
(Explicit Locations): Document how "-function" is interpreted in
C++ and Ada. Document "-qualified".
|
|
This changes a few linespec functions to work on "const char *" and
then fixes up all the callers. This allows further constification
elsewhere.
gdb/ChangeLog
2017-09-27 Tom Tromey <tom@tromey.com>
* tracepoint.c (info_scope_command): Constify.
* python/python.c (gdbpy_decode_line): Constify.
* python/py-breakpoint.c (bppy_init): Constify.
* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Constify.
* location.h: (new_linespec_location)
(string_to_event_location_basic, string_to_event_location):
Constify.
* location.c (new_linespec_location)
(string_to_event_location_basic, string_to_event_location):
Constify.
* linespec.h (decode_line_with_current_source)
(decode_line_with_last_displayed, linespec_lex_to_end): Constify.
* linespec.c (linespec_lex_to_end)
(decode_line_with_current_source)
(decode_line_with_last_displayed): Constify.
* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x):
Constify.
* cli/cli-cmds.c (edit_command, list_command): Constify.
* breakpoint.h (until_break_command, watch_command_wrapper)
(awatch_command_wrapper, rwatch_command_wrapper)
(init_ada_exception_breakpoint): Constify.
* breakpoint.c (break_command_1, dprintf_command)
(break_range_command, watch_command_wrapper)
(rwatch_command_wrapper, awatch_command_wrapper)
(until_break_command, init_ada_exception_breakpoint)
(strace_marker_create_sals_from_location, trace_command)
(ftrace_command, strace_command, struct tracepoint): Constify.
* ax-gdb.c (agent_command_1): Constify.
* ada-lang.c (ada_exception_sal): Constify.
|
|
This renames a few functions -- skip_spaces_const,
skip_to_space_const, get_number_const, extract_arg_const -- to drop
the "_const" suffix and instead rely on overloading.
This makes future const fixes simpler by reducing the number of lines
that must be changed. I think it is also not any less clear, as all
these functions have the same interface as their non-const versions by
design. Furthermore there's an example of using an overload in-tree
already, namely check_for_argument.
This patch was largely created using some perl one-liners; then a few
fixes were applied by hand.
ChangeLog
2017-09-11 Tom Tromey <tom@tromey.com>
* common/common-utils.h (skip_to_space): Remove macro, redeclare
as function.
(skip_to_space): Rename from skip_to_space_const.
* common/common-utils.c (skip_to_space): New function.
(skip_to_space): Rename from skip_to_space_const.
* cli/cli-utils.h (get_number): Rename from get_number_const.
(extract_arg): Rename from extract_arg_const.
* cli/cli-utils.c (get_number): Rename from get_number_const.
(extract_arg): Rename from extract_arg_const.
(number_or_range_parser::get_number): Use ::get_number.
* aarch64-linux-tdep.c, ada-lang.c, arm-linux-tdep.c, ax-gdb.c,
break-catch-throw.c, breakpoint.c, cli/cli-cmds.c, cli/cli-dump.c,
cli/cli-script.c, cli/cli-setshow.c, compile/compile.c,
completer.c, demangle.c, disasm.c, findcmd.c, linespec.c,
linux-tdep.c, linux-thread-db.c, location.c, mi/mi-parse.c,
minsyms.c, nat/linux-procfs.c, printcmd.c, probe.c,
python/py-breakpoint.c, record.c, rust-exp.y, serial.c, stack.c,
stap-probe.c, tid-parse.c, tracepoint.c: Update all callers.
|
|
This changes a few places in the Python code to avoid manual memory
management, in favor of letting std::string do the work.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* python/python.c (compute_python_string): Return std::string.
(gdbpy_eval_from_control_command): Update.
(do_start_initialization): Use std::string.
* python/py-varobj.c (py_varobj_iter_next): Use string_printf, not
xstrprintf.
* python/py-breakpoint.c (local_setattro): Use string_printf, not
xstrprintf.
|
