| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Lets give this function a more descriptive name. I've also improved
the comments in the header and source files.
There should be no user visible changes after this commit.
|
|
There are a few places where we call the target_ops::can_async_p
member function directly, instead of using the target_can_async_p
wrapper.
In some of these places this is because we need to ask before the
target has been pushed, and in another location (in target.c) it seems
unnecessary to go through the wrapper when we are already in target.c
code.
However, in the next commit I'd like to hoist some common checks out
of target specific code into target.c. To achieve this, in this
commit, I introduce a new overload of target_can_async_p which takes a
target_ops pointer, and calls the ::can_async_p method directly. I
then make use of the new overload where appropriate.
There should be no user visible changes after this commit.
|
|
The motivation is to reduce the number of places where unmanaged
pointers are returned from allocation type routines. All of the
callers are updated.
There should be no user visible changes after this commit.
|
|
non-stop
When doing "continue -a" in non-stop mode, each thread is individually
resumed while the commit resumed state is enabled. This forces the
target to commit each resumption immediately, instead of being able to
batch things.
The reason is that there is no scoped_disable_commit_resumed around the
loop over threads in continue_1, when "non_stop && all_threads" is true.
Since the proceed function is called once for each thread, the
scoped_disable_commit_resumed in proceed therefore forces commit-resumed
between each thread resumption. Add the necessary
scoped_disable_commit_resumed in continue_1 to avoid that.
I looked at the MI side of things, the function exec_continue, and found
that it was correct. There is a similar iteration over threads, and
there is a scoped_disable_commit_resumed at the function scope. This is
not wrong, but a bit more than we need. The branches that just call
continue_1 do not need it, as continue_1 takes care of disabling commit
resumed. So, move the scoped_disable_commit_resumed to the inner scope
where we iterate on threads and proceed them individually.
Here's an example debugging a multi-threaded program attached by
gdbserver (debug output trimmed for brevity):
$ ./gdb -nx -q --data-directory=data-directory -ex "set non-stop" -ex "tar rem :1234"
(gdb) set debug remote
(gdb) set debug infrun
(gdb) c -a
Continuing.
[infrun] proceed: enter
[infrun] scoped_disable_commit_resumed: reason=proceeding
[remote] Sending packet: $vCont;c:p14388.14388#90
[infrun] reset: reason=proceeding
[infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target remote
[infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target remote
[infrun] proceed: exit
[infrun] proceed: enter
[infrun] scoped_disable_commit_resumed: reason=proceeding
[remote] Sending packet: $vCont;c:p14388.1438a#b9
[infrun] reset: reason=proceeding
[infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target remote
[infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target remote
[infrun] proceed: exit
... and so on for each thread ...
Notice how we send one vCont;c for each thread. With the patch applied, we
send a single vCont;c at the end:
[infrun] scoped_disable_commit_resumed: reason=continue all threads in non-stop
[infrun] proceed: enter
[infrun] scoped_disable_commit_resumed: reason=proceeding
[infrun] reset: reason=proceeding
[infrun] proceed: exit
[infrun] clear_proceed_status_thread: Thread 85790.85792
[infrun] proceed: enter
[infrun] scoped_disable_commit_resumed: reason=proceeding
[infrun] reset: reason=proceeding
[infrun] proceed: exit
... proceeding threads individually ...
[infrun] reset: reason=continue all threads in non-stop
[infrun] maybe_set_commit_resumed_all_targets: enabling commit-resumed for target remote
[infrun] maybe_call_commit_resumed_all_targets: calling commit_resumed for target remote
[remote] Sending packet: $vCont;c#a8
Change-Id: I331dd2473c5aa5114f89854196fed2a8fdd122bb
|
|
I don't find that the bpstat typedef, which hides a pointer, is
particularly useful. In fact, it confused me many times, and I just see
it as something to remember that adds cognitive load. Also, with C++,
we might want to be able to pass bpstats objects by const-reference, not
necessarily by pointer.
So, remove the bpstat typedef and rename struct bpstats to bpstat (since
it represents one bpstat, it makes sense that it is singular).
Change-Id: I52e763b6e54ee666a9e045785f686d37b4f5f849
|
|
String-like settings (var_string, var_filename, var_optional_filename,
var_string_noescape) currently take a pointer to a `char *` storage
variable (typically global) that holds the setting's value. I'd like to
"mordernize" this by changing them to use an std::string for storage.
An obvious reason is that string operations on std::string are often
easier to write than with C strings. And they avoid having to do any
manual memory management.
Another interesting reason is that, with `char *`, nullptr and an empty
string often both have the same meaning of "no value". String settings
are initially nullptr (unless initialized otherwise). But when doing
"set foo" (where `foo` is a string setting), the setting now points to
an empty string. For example, solib_search_path is nullptr at startup,
but points to an empty string after doing "set solib-search-path". This
leads to some code that needs to check for both to check for "no value".
Or some code that converts back and forth between NULL and "" when
getting or setting the value. I find this very error-prone, because it
is very easy to forget one or the other. With std::string, we at least
know that the variable is not "NULL". There is only one way of
representing an empty string setting, that is with an empty string.
I was wondering whether the distinction between NULL and "" would be
important for some setting, but it doesn't seem so. If that ever
happens, it would be more C++-y and self-descriptive to use
optional<string> anyway.
Actually, there's one spot where this distinction mattered, it's in
init_history, for the test gdb.base/gdbinit-history.exp. init_history
sets the history filename to the default ".gdb_history" if it sees that
the setting was never set - if history_filename is nullptr. If
history_filename is an empty string, it means the setting was explicitly
cleared, so it leaves it as-is. With the change to std::string, this
distinction doesn't exist anymore. This can be fixed by moving the code
that chooses a good default value for history_filename to
_initialize_top. This is ran before -ex commands are processed, so an
-ex command can then clear that value if needed (what
gdb.base/gdbinit-history.exp tests).
Another small improvement, in my opinion is that we can now easily
give string parameters initial values, by simply initializing the global
variables, instead of xstrdup-ing it in the _initialize function.
In Python and Guile, when registering a string-like parameter, we
allocate (with new) an std::string that is owned by the param_smob (in
Guile) and the parmpy_object (in Python) objects.
This patch started by changing all relevant add_setshow_* commands to
take an `std::string *` instead of a `char **` and fixing everything
that failed to build. That includes of course all string setting
variable and their uses.
string_option_def now uses an std::string also, because there's a
connection between options and settings (see
add_setshow_cmds_for_options).
The add_path function in source.c is really complex and twisted, I'd
rather not try to change it to work on an std::string right now.
Instead, I added an overload that copies the std:string to a `char *`
and back. This means more copying, but this is not used in a hot path
at all, so I think it is acceptable.
Change-Id: I92c50a1bdd8307141cdbacb388248e4e4fc08c93
Co-authored-by: Lancelot SIX <lsix@lancelotsix.com>
|
|
As reported in PR gdb/28076 [1], passing no condition argument to the
-break-condition command (e.g.: "-break-condition 2") should clear the
condition for breakpoint 2, just like CLI's "condition 2", but instead
an error message is returned:
^error,msg="-break-condition: Missing the <number> and/or <expr> argument"
The current implementation of the -break-condition command's argument
handling (79aabb7308c "gdb/mi: add a '--force' flag to the
'-break-condition' command") was done according to the documentation,
where the condition argument seemed mandatory. However, the
-break-condition command originally (i.e. before the 79aabb7308c
patch) used the CLI's "cond" command, and back then not passing a
condition argument was clearing out the condition. So, this is a
regression in terms of the behavior.
Fix the argument handling of the -break-condition command to allow not
having a condition argument, and also update the document to make the
behavior clear. Also add test cases to test the scenarios which were
previously not covered.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=28076
|
|
Same idea as the previous patch, but for m_terminal.
Change-Id: If9367d5db8c976a4336680adca4ea5bc31ab64d2
|
|
As reported in PR gdb/28077, we hit an internal error when using
-exec-interrupt with --thread-group:
info threads
&"info threads\n"
~" Id Target Id Frame \n"
~"* 1 process 403312 \"loop\" (running)\n"
^done
(gdb)
-exec-interrupt --thread-group i1
~"/home/simark/src/binutils-gdb/gdb/target.c:3768: internal-error: void target_stop(ptid_t): Assertion `!proc_target->commit_resumed_state' failed.\nA problem internal to GDB has been detected,\nfurther debugging may prove unreliable.\nQuit this debugging session? (y or n) "
This is because this code path never disables commit-resumed (a
requirement for calling target_stop, as documented in
process_stratum_target::»commit_resumed_state) before calling
target_stop.
The other 3 code paths in mi_cmd_exec_interrupt use interrupt_target_1,
which does it. But the --thread-group code path uses its own thing
which doesn't do it. Fix this by adding a scoped_disable_commit_resumed
in this code path.
Calling -exec-interrupt with --thread-group is apparently not tested at
the moment (which is why this bug could creep in). Add a new test for
that. The test runs two inferiors and tries to interrupt them with
"-exec-interrupt --thread-group X".
This will need to be merged in the gdb-11-branch, so here are ChangeLog
entries:
gdb/ChangeLog:
* mi/mi-main.c (mi_cmd_exec_interrupt): Use
scoped_disable_commit_resumed in the --thread-group case.
gdb/testsuite/ChangeLog:
* gdb.mi/interrupt-thread-group.c: New.
* gdb.mi/interrupt-thread-group.exp: New.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28077
Change-Id: I615efefcbcaf2c15d47caf5e4b9d82854b2a2fcb
|
|
This commit adds a new option '--group-by-objfile' to the MI command
-file-list-exec-source-files. With this option the output format is
changed; instead of a single list of source files the results are now
a list of objfiles. For each objfile all of the source files
associated with that objfile are listed.
Here is an example of the new output format taken from the
documentation (the newlines are added just for readability):
-file-list-exec-source-files --group-by-objfile
^done,files=[{filename="/tmp/info-sources/test.x",
debug-info="fully-read",
sources=[{file="test.c",
fullname="/tmp/info-sources/test.c",
debug-fully-read="true"},
{file="/usr/include/stdc-predef.h",
fullname="/usr/include/stdc-predef.h",
debug-fully-read="true"},
{file="header.h",
fullname="/tmp/info-sources/header.h",
debug-fully-read="true"}]},
{filename="/lib64/ld-linux-x86-64.so.2",
debug-info="none",
sources=[]},
{filename="system-supplied DSO at 0x7ffff7fcf000",
debug-info="none",
sources=[]},
{filename="/tmp/info-sources/libhelper.so",
debug-info="fully-read",
sources=[{file="helper.c",
fullname="/tmp/info-sources/helper.c",
debug-fully-read="true"},
{file="/usr/include/stdc-predef.h",
fullname="/usr/include/stdc-predef.h",
debug-fully-read="true"},
{file="header.h",
fullname="/tmp/info-sources/header.h",
debug-fully-read="true"}]},
{filename="/lib64/libc.so.6",
debug-info="none",
sources=[]}]
In the above output the 'debug-info' field associated with each
objfile will have one of the values 'none', 'partially-read', or
'fully-read'. For example, /lib64/libc.so.6 has the value 'none',
this indicates that this object file has no debug information
associated with it, unsurprisingly then, the sources list of this
object file is empty.
An object file that was compiled with debug, for example
/tmp/info-sources/libhelper.so, has the value 'fully-read' above
indicating that this object file does have debug information, and the
information is fully read into GDB. At different times this field
might have the value 'partially-read' indicating that that the object
file has debug information, but it has not been fully read into GDB
yet.
Source files can appear at most once for any single objfile, but can
appear multiple times in total, if the same source file is part of
multiple objfiles, for example /tmp/info-sources/header.h in the above
output.
The new output format is hidden behind a command option to ensure that
the default output is unchanged, this ensures backward compatibility.
The behaviour of the CLI "info sources" command is unchanged after
this commit.
gdb/ChangeLog:
* NEWS: Mention additions to -file-list-exec-source-files.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Add
--group-by-objfile option.
* symtab.c (isrc_flag_option_def): Rename to...
(isrc_match_flag_option_def): ...this.
(info_sources_option_defs): Rename to...
(info_sources_match_option_defs): ...this, and update to rename of
isrc_flag_option_def.
(struct filename_grouping_opts): New struct.
(isrc_grouping_flag_option_def): New type.
(info_sources_grouping_option_defs): New static global.
(make_info_sources_options_def_group): Update to return two option
groups.
(info_sources_command_completer): Update for changes to
make_info_sources_options_def_group.
(info_sources_worker): Add extra parameter, use this to display
alternative output format.
(info_sources_command): Pass extra parameter to
info_sources_worker.
(_initialize_symtab): Update for changes to
make_info_sources_options_def_group.
* symtab.h (info_sources_worker): Add extra parameter.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI File Commands): Document --group-by-objfile
extension for -file-list-exec-source-files.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-info-sources.exp: Add additional tests.
|
|
This commit extends the existing MI command
-file-list-exec-source-files to provide the same regular expression
based filtering that the equivalent CLI command "info sources"
provides.
The new command syntax is:
-file-list-exec-source-files [--basename | --dirname] [--] [REGEXP]
All options are optional, which ensures the command is backward
compatible.
As part of this work I have unified the CLI and MI code.
As a result of the unified code I now provide additional information
in the MI command output, there is now a new field 'debug-fully-read'
included with each source file. This field which has the values
'true' or 'false', indicates if the source file is from a compilation
unit that has had its debug information fully read. However, as this
is additional information, a well written front-end should just ignore
this field if it doesn't understand it, so things should still be
backward compatible.
gdb/ChangeLog:
* NEWS: Mention additions to -file-list-exec-source-files.
* mi/mi-cmd-file.c (print_partial_file_name): Delete.
(mi_cmd_file_list_exec_source_files): Rewrite to handle command
options, and make use of info_sources_worker.
* symtab.c (struct info_sources_filter): Moved to symtab.h.
(info_sources_filter::print): Take uiout argument, produce output
through uiout.
(struct output_source_filename_data)
<output_source_filename_data>: Take uiout argument, store into
m_uiout. <output>: Rewrite comment, add additional arguments to
declaration. <operator()>: Send more arguments to
output. <m_uiout>: New member variable.
(output_source_filename_data::output): Take extra arguments,
produce output through m_uiout, and structure for MI.
(output_source_filename_data::print_header): Produce output
through m_uiout.
(info_sources_worker): New function, the implementation is taken
from info_sources_command, but modified so produce output through
a ui_out.
(info_sources_command): The second half of this function has gone
to become info_sources_worker.
* symtab.h (struct info_sources_filter): Moved from symtab.c, add
extra parameter to print member function.
(info_sources_worker): Declare.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI File Commands): Document extensions to
-file-list-exec-source-files.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-filename.exp: Update expected results.
* gdb.mi/mi-file.exp: Likewise.
* gdb.mi/mi-info-sources-base.c: New file.
* gdb.mi/mi-info-sources.c: New file.
* gdb.mi/mi-info-sources.exp: New file.
|
|
I spotted some indentation issues where we had some spaces followed by
tabs at beginning of line, that I wanted to fix. So while at it, I did
a quick grep to find and fix all I could find.
gdb/ChangeLog:
* Fix tab after space indentation issues throughout.
Change-Id: I1acb414dd9c593b474ae2b8667496584df4316fd
|
|
I wrote a small script to spot a pattern of indentation mistakes I saw
happened in breakpoint.c. And while at it I ran it on all files and
fixed what I found. No behavior changes intended, just indentation and
addition / removal of curly braces.
gdb/ChangeLog:
* Fix some indentation mistakes throughout.
gdbserver/ChangeLog:
* Fix some indentation mistakes throughout.
Change-Id: Ia01990c26c38e83a243d8f33da1d494f16315c6e
|
|
Remove a few instances where we look up a command by name, but could
just use the return value of a previous "add command" function call
instead.
gdb/ChangeLog:
* mi/mi-main.c (_initialize_mi_main):
* python/py-auto-load.c (gdbpy_initialize_auto_load):
* remote.c (_initialize_remote):
Change-Id: I6d06f9ca636e340c88c1064ae870483ad392607d
|
|
While adding a ui_out::text () overload accepting a std::string, I
noticed that several callers of ui_out::field_string () were converting
std::string instances to char pointers even if not necessary.
gdb/ChangeLog:
* ui-out.c (ui_out::field_string): Add missing style_argument
to the overload accepting a std::string, to make it equivalent
to the char pointer version.
* ui-out.h (class ui_out): Ditto.
* break-catch-sig.c (signal_catchpoint_print_one): Do not
convert std::strings to char pointers before passing them to
ui_out::field_string ().
* break-catch-throw.c (print_one_detail_exception_catchpoint):
Ditto.
* cli/cli-setshow.c (do_show_command): Ditto.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Ditto.
* infcmd.c (print_return_value_1): Ditto.
* inferior.c (print_inferior): Ditto.
* linux-thread-db.c (info_auto_load_libthread_db): Ditto.
* mi/mi-cmd-var.c (print_varobj): Ditto.
(mi_cmd_var_set_format): Ditto.
(mi_cmd_var_info_type): Ditto.
(mi_cmd_var_info_expression): Ditto.
(mi_cmd_var_evaluate_expression): Ditto.
(mi_cmd_var_assign): Ditto.
(varobj_update_one): Ditto.
* mi/mi-main.c (list_available_thread_groups): Ditto.
(mi_cmd_data_read_memory_bytes): Ditto.
(mi_cmd_trace_frame_collected): Ditto.
* osdata.c (info_osdata): Ditto.
* probe.c (info_probes_for_spops): Ditto.
* target-connection.c (print_connection): Ditto.
* thread.c (print_thread_info_1): Ditto.
* tracepoint.c (print_one_static_tracepoint_marker): Ditto.
|
|
Add a '--force' flag to the '-break-condition' command to be
able to force conditions.
gdb/ChangeLog:
2021-05-06 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* mi/mi-cmd-break.c (mi_cmd_break_condition): New function.
* mi/mi-cmds.c: Change the binding of "-break-condition" to
mi_cmd_break_condition.
* mi/mi-cmds.h (mi_cmd_break_condition): Declare.
* breakpoint.h (set_breakpoint_condition): Declare a new
overload.
* breakpoint.c (set_breakpoint_condition): New overloaded function
extracted out from ...
(condition_command): ... this.
* NEWS: Mention the change.
gdb/testsuite/ChangeLog:
2021-05-06 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.mi/mi-break.exp (test_forced_conditions): Add a test
for the -break-condition command's "--force" flag.
gdb/doc/ChangeLog:
2021-05-06 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.texinfo (GDB/MI Breakpoint Commands): Mention the
'--force' flag of the '-break-condition' command.
|
|
Add a '--force-condition' flag to the '-break-insert' command to be
able to force conditions. Because the '-dprintf-insert' command uses
the same mechanism as the '-break-insert' command, it obtains the
'--force-condition' flag, too.
gdb/ChangeLog:
2021-05-06 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Recognize the
'--force-condition' flag to force the condition in the
'-break-insert' and '-dprintf-insert' commands.
* NEWS: Mention the change.
gdb/testsuite/ChangeLog:
2021-05-06 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.mi/mi-break.exp (test_forced_conditions): New proc that
is called by the test.
gdb/doc/ChangeLog:
2021-05-06 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.texinfo (GDB/MI Breakpoint Commands): Mention the
'--force-condition' flag of the '-break-insert' and
'-dprintf-insert' commands.
|
|
Give a name to each observer, this will help produce more meaningful
debug message.
gdbsupport/ChangeLog:
* observable.h (class observable) <struct observer> <observer>:
Add name parameter.
<name>: New field.
<attach>: Add name parameter, update all callers.
Change-Id: Ie0cc4664925215b8d2b09e026011b7803549fba0
|
|
The 'create_breakpoint' function takes a 'parse_extra' argument that
determines whether the condition, thread, and force-condition
specifiers should be parsed from the extra string or be used from the
function arguments. However, for the case when 'parse_extra' is
false, there is no way to pass the force-condition specifier. This
patch adds it as a new argument.
Also, in the case when parse_extra is false, the current behavior is
as if the condition is being forced. This is a bug. The default
behavior should reject the breakpoint. See below for a demo of this
incorrect behavior. (The MI command '-break-insert' uses the
'create_breakpoint' function with parse_extra=0.)
$ gdb -q --interpreter=mi3 /tmp/simple
=thread-group-added,id="i1"
=cmd-param-changed,param="history save",value="on"
=cmd-param-changed,param="auto-load safe-path",value="/"
~"Reading symbols from /tmp/simple...\n"
(gdb)
-break-insert -c junk -f main
&"warning: failed to validate condition at location 1, disabling:\n "
&"No symbol \"junk\" in current context.\n"
^done,bkpt={number="1",type="breakpoint",disp="keep",enabled="y",addr="<MULTIPLE>",cond="junk",times="0",original-location="main",locations=[{number="1.1",enabled="N",addr="0x000000000000114e",func="main",file="/tmp/simple.c",fullname="/tmp/simple.c",line="2",thread-groups=["i1"]}]}
(gdb)
break main if junk
&"break main if junk\n"
&"No symbol \"junk\" in current context.\n"
^error,msg="No symbol \"junk\" in current context."
(gdb)
break main -force-condition if junk
&"break main -force-condition if junk\n"
~"Note: breakpoint 1 also set at pc 0x114e.\n"
&"warning: failed to validate condition at location 1, disabling:\n "
&"No symbol \"junk\" in current context.\n"
~"Breakpoint 2 at 0x114e: file /tmp/simple.c, line 2.\n"
=breakpoint-created,bkpt={number="2",type="breakpoint",disp="keep",enabled="y",addr="<MULTIPLE>",cond="junk",times="0",original-location="main",locations=[{number="2.1",enabled="N",addr="0x000000000000114e",func="main",file="/tmp/simple.c",fullname="/tmp/simple.c",line="2",thread-groups=["i1"]}]}
^done
(gdb)
After applying this patch, we get the behavior below:
(gdb)
-break-insert -c junk -f main
^error,msg="No symbol \"junk\" in current context."
This restores the behavior that is present in the existing releases.
gdb/ChangeLog:
2021-04-21 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* breakpoint.h (create_breakpoint): Add a new parameter,
'force_condition'.
* breakpoint.c (create_breakpoint): Use the 'force_condition'
argument when 'parse_extra' is false to check if the condition
is invalid at all of the breakpoint locations.
Update the users below.
(break_command_1)
(dprintf_command)
(trace_command)
(ftrace_command)
(strace_command)
(create_tracepoint_from_upload): Update.
* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Update.
* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Update.
* python/py-breakpoint.c (bppy_init): Update.
* python/py-finishbreakpoint.c (bpfinishpy_init): Update.
gdb/testsuite/ChangeLog:
2021-04-21 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.mi/mi-break.exp: Extend with checks for invalid breakpoint
conditions.
|
|
gdb/ChangeLog:
* cp-name-parser.y: Use startswith instead of strncmp.
* m2-exp.y: Likewise.
* macroexp.c (substitute_args): Likewise.
* mi/mi-main.c (command_notifies_uscc_observer): Likewise.
* rust-exp.y: Likewise.
|
|
This changes quick_symbol_functions::map_symbol_filenames to use a
function_view, and updates all the uses. It also changes the final
parameter to 'bool'. A couple of spots are further updated to use
operator() rather than a lambda.
gdb/ChangeLog
2021-03-26 Tom Tromey <tom@tromey.com>
* symtab.c (struct output_source_filename_data): Add 'output'
method and operator().
(output_source_filename_data::output): Rename from
output_source_filename.
(output_partial_symbol_filename): Remove.
(info_sources_command): Update.
(struct add_partial_filename_data): Add operator().
(add_partial_filename_data::operator()): Rename from
maybe_add_partial_symtab_filename.
(make_source_files_completion_list): Update.
* symfile.c (quick_symbol_functions): Update.
* symfile-debug.c (objfile::map_symbol_filenames): Update.
* quick-symbol.h (symbol_filename_ftype): Change type of 'fun' and
'need_fullname'. Remove 'data' parameter.
(struct quick_symbol_functions) <map_symbol_filenames>: Likewise.
* psymtab.c (psymbol_functions::map_symbol_filenames): Update.
* psympriv.h (struct psymbol_functions) <map_symbol_filenames>:
Change type of 'fun' and 'need_fullname'. Remove 'data'
parameter.
* objfiles.h (struct objfile) <map_symbol_filenames>: Change type
of 'fun' and 'need_fullname'. Remove 'data' parameter.
* mi/mi-cmd-file.c (print_partial_file_name): Remove 'ignore'
parameter.
(mi_cmd_file_list_exec_source_files): Update.
* dwarf2/read.c
(dwarf2_base_index_functions::map_symbol_filenames): Update.
|
|
pending statuses
The rationale for this patch comes from the ROCm port [1], the goal
being to reduce the number of back and forths between GDB and the
target when doing successive operations. I'll start with explaining
the rationale and then go over the implementation. In the ROCm / GPU
world, the term "wave" is somewhat equivalent to a "thread" in GDB.
So if you read if from a GPU stand point, just s/thread/wave/.
ROCdbgapi, the library used by GDB [2] to communicate with the GPU
target, gives the illusion that it's possible for the debugger to
control (start and stop) individual threads. But in reality, this is
not how it works. Under the hood, all threads of a queue are
controlled as a group. To stop one thread in a group of running ones,
the state of all threads is retrieved from the GPU, all threads are
destroyed, and all threads but the one we want to stop are re-created
from the saved state. The net result, from the point of view of GDB,
is that the library stopped one thread. The same thing goes if we
want to resume one thread while others are running: the state of all
running threads is retrieved from the GPU, they are all destroyed, and
they are all re-created, including the thread we want to resume.
This leads to some inefficiencies when combined with how GDB works,
here are two examples:
- Stopping all threads: because the target operates in non-stop mode,
when the user interface mode is all-stop, GDB must stop all threads
individually when presenting a stop. Let's suppose we have 1000
threads and the user does ^C. GDB asks the target to stop one
thread. Behind the scenes, the library retrieves 1000 thread
states and restores the 999 others still running ones. GDB asks
the target to stop another one. The target retrieves 999 thread
states and restores the 998 remaining ones. That means that to
stop 1000 threads, we did 1000 back and forths with the GPU. It
would have been much better to just retrieve the states once and
stop there.
- Resuming with pending events: suppose the 1000 threads hit a
breakpoint at the same time. The breakpoint is conditional and
evaluates to true for the first thread, to false for all others.
GDB pulls one event (for the first thread) from the target, decides
that it should present a stop, so stops all threads using
stop_all_threads. All these other threads have a breakpoint event
to report, which is saved in `thread_info::suspend::waitstatus` for
later. When the user does "continue", GDB resumes that one thread
that did hit the breakpoint. It then processes the pending events
one by one as if they just arrived. It picks one, evaluates the
condition to false, and resumes the thread. It picks another one,
evaluates the condition to false, and resumes the thread. And so
on. In between each resumption, there is a full state retrieval
and re-creation. It would be much nicer if we could wait a little
bit before sending those threads on the GPU, until it processed all
those pending events.
To address this kind of performance issue, ROCdbgapi has a concept
called "forward progress required", which is a boolean state that
allows its user (i.e. GDB) to say "I'm doing a bunch of operations,
you can hold off putting the threads on the GPU until I'm done" (the
"forward progress not required" state). Turning forward progress back
on indicates to the library that all threads that are supposed to be
running should now be really running on the GPU.
It turns out that GDB has a similar concept, though not as general,
commit_resume. One difference is that commit_resume is not stateful:
the target can't look up "does the core need me to schedule resumed
threads for execution right now". It is also specifically linked to
the resume method, it is not used in other contexts. The target
accumulates resumption requests through target_ops::resume calls, and
then commits those resumptions when target_ops::commit_resume is
called. The target has no way to check if it's ok to leave resumed
threads stopped in other target methods.
To bridge the gap, this patch generalizes the commit_resume concept in
GDB to match the forward progress concept of ROCdbgapi. The current
name (commit_resume) can be interpreted as "commit the previous resume
calls". I renamed the concept to "commit_resumed", as in "commit the
threads that are resumed".
In the new version, we have two things:
- the commit_resumed_state field in process_stratum_target: indicates
whether GDB requires target stacks using this target to have
resumed threads committed to the execution target/device. If
false, an execution target is allowed to leave resumed threads
un-committed at the end of whatever method it is executing.
- the commit_resumed target method: called when commit_resumed_state
transitions from false to true. While commit_resumed_state was
false, the target may have left some resumed threads un-committed.
This method being called tells it that it should commit them back
to the execution device.
Let's take the "Stopping all threads" scenario from above and see how
it would work with the ROCm target with this change. Before stopping
all threads, GDB would set the target's commit_resumed_state field to
false. It would then ask the target to stop the first thread. The
target would retrieve all threads' state from the GPU and mark that
one as stopped. Since commit_resumed_state is false, it leaves all
the other threads (still resumed) stopped. GDB would then proceed to
call target_stop for all the other threads. Since resumed threads are
not committed, this doesn't do any back and forth with the GPU.
To simplify the implementation of targets, this patch makes it so that
when calling certain target methods, the contract between the core and
the targets guarantees that commit_resumed_state is false. This way,
the target doesn't need two paths, one for commit_resumed_state ==
true and one for commit_resumed_state == false. It can just assert
that commit_resumed_state is false and work with that assumption.
This also helps catch places where we forgot to disable
commit_resumed_state before calling the method, which represents a
probable optimization opportunity. The commit adds assertions in the
target method wrappers (target_resume and friends) to have some
confidence that this contract between the core and the targets is
respected.
The scoped_disable_commit_resumed type is used to disable the commit
resumed state of all process targets on construction, and selectively
re-enable it on destruction (see below for criteria). Note that it
only sets the process_stratum_target::commit_resumed_state flag. A
subsequent call to maybe_call_commit_resumed_all_targets is necessary
to call the commit_resumed method on all target stacks with process
targets that got their commit_resumed_state flag turned back on. This
separation is because we don't want to call the commit_resumed methods
in scoped_disable_commit_resumed's destructor, as they may throw.
On destruction, commit-resumed is not re-enabled for a given target
if:
1. this target has no threads resumed, or
2. this target has at least one resumed thread with a pending status
known to the core (saved in thread_info::suspend::waitstatus).
The first point is not technically necessary, because a proper
commit_resumed implementation would be a no-op if the target has no
resumed threads. But since we have a flag do to a quick check, it
shouldn't hurt.
The second point is more important: together with the
scoped_disable_commit_resumed instance added in fetch_inferior_event,
it makes it so the "Resuming with pending events" described above is
handled efficiently. Here's what happens in that case:
1. The user types "continue".
2. Upon destruction, the scoped_disable_commit_resumed in the
`proceed` function does not enable commit-resumed, as it sees some
threads have pending statuses.
3. fetch_inferior_event is called to handle another event, the
breakpoint hit evaluates to false, and that thread is resumed.
Because there are still more threads with pending statuses, the
destructor of scoped_disable_commit_resumed in
fetch_inferior_event still doesn't enable commit-resumed.
4. Rinse and repeat step 3, until the last pending status is handled
by fetch_inferior_event. In that case,
scoped_disable_commit_resumed's destructor sees there are no more
threads with pending statues, so it asks the target to commit
resumed threads.
This allows us to avoid all unnecessary back and forths, there is a
single commit_resumed call once all pending statuses are processed.
This change required remote_target::remote_stop_ns to learn how to
handle stopping threads that were resumed but pending vCont. The
simplest example where that happens is when using the remote target in
all-stop, but with "maint set target-non-stop on", to force it to
operate in non-stop mode under the hood. If two threads hit a
breakpoint at the same time, GDB will receive two stop replies. It
will present the stop for one thread and save the other one in
thread_info::suspend::waitstatus.
Before this patch, when doing "continue", GDB first resumes the thread
without a pending status:
Sending packet: $vCont;c:p172651.172676#f3
It then consumes the pending status in the next fetch_inferior_event
call:
[infrun] do_target_wait_1: Using pending wait status status->kind = stopped, signal = GDB_SIGNAL_TRAP for Thread 1517137.1517137.
[infrun] target_wait (-1.0.0, status) =
[infrun] 1517137.1517137.0 [Thread 1517137.1517137],
[infrun] status->kind = stopped, signal = GDB_SIGNAL_TRAP
It then realizes it needs to stop all threads to present the stop, so
stops the thread it just resumed:
[infrun] stop_all_threads: Thread 1517137.1517137 not executing
[infrun] stop_all_threads: Thread 1517137.1517174 executing, need stop
remote_stop called
Sending packet: $vCont;t:p172651.172676#04
This is an unnecessary resume/stop. With this patch, we don't commit
resumed threads after proceeding, because of the pending status:
[infrun] maybe_commit_resumed_all_process_targets: not requesting commit-resumed for target extended-remote, a thread has a pending waitstatus
When GDB handles the pending status and stop_all_threads runs, we stop a
resumed but pending vCont thread:
remote_stop_ns: Enqueueing phony stop reply for thread pending vCont-resume (1520940, 1520976, 0)
That thread was never actually resumed on the remote stub / gdbserver,
so we shouldn't send a packet to the remote side asking to stop the
thread.
Note that there are paths that resume the target and then do a
synchronous blocking wait, in sort of nested event loop, via
wait_sync_command_done. For example, inferior function calls, or any
run control command issued from a breakpoint command list. We handle
that making wait_sync_command_one a "sync" point -- force forward
progress, or IOW, force-enable commit-resumed state.
gdb/ChangeLog:
yyyy-mm-dd Simon Marchi <simon.marchi@efficios.com>
Pedro Alves <pedro@palves.net>
* infcmd.c (run_command_1, attach_command, detach_command)
(interrupt_target_1): Use scoped_disable_commit_resumed.
* infrun.c (do_target_resume): Remove
target_commit_resume call.
(commit_resume_all_targets): Remove.
(maybe_set_commit_resumed_all_targets): New.
(maybe_call_commit_resumed_all_targets): New.
(enable_commit_resumed): New.
(scoped_disable_commit_resumed::scoped_disable_commit_resumed)
(scoped_disable_commit_resumed::~scoped_disable_commit_resumed)
(scoped_disable_commit_resumed::reset)
(scoped_disable_commit_resumed::reset_and_commit)
(scoped_enable_commit_resumed::scoped_enable_commit_resumed)
(scoped_enable_commit_resumed::~scoped_enable_commit_resumed):
New.
(proceed): Use scoped_disable_commit_resumed and
maybe_call_commit_resumed_all_targets.
(fetch_inferior_event): Use scoped_disable_commit_resumed.
* infrun.h (struct scoped_disable_commit_resumed): New.
(maybe_call_commit_resumed_all_process_targets): New.
(struct scoped_enable_commit_resumed): New.
* mi/mi-main.c (exec_continue): Use scoped_disable_commit_resumed.
* process-stratum-target.h (class process_stratum_target):
<commit_resumed_state>: New.
* record-full.c (record_full_wait_1): Change commit_resumed_state
around calling commit_resumed.
* remote.c (class remote_target) <commit_resume>: Rename to...
<commit_resumed>: ... this.
(struct stop_reply): Move up.
(remote_target::commit_resume): Rename to...
(remote_target::commit_resumed): ... this. Check if there is any
thread pending vCont resume.
(remote_target::remote_stop_ns): Generate stop replies for resumed
but pending vCont threads.
(remote_target::wait_ns): Add gdb_assert.
* target-delegates.c: Regenerate.
* target.c (target_wait, target_resume): Assert that the current
process_stratum target isn't in commit-resumed state.
(defer_target_commit_resume): Remove.
(target_commit_resume): Remove.
(target_commit_resumed): New.
(make_scoped_defer_target_commit_resume): Remove.
(target_stop): Assert that the current process_stratum target
isn't in commit-resumed state.
* target.h (struct target_ops) <commit_resume>: Rename to ...
<commit_resumed>: ... this.
(target_commit_resume): Remove.
(target_commit_resumed): New.
(make_scoped_defer_target_commit_resume): Remove.
* top.c (wait_sync_command_done): Use
scoped_enable_commit_resumed.
[1] https://github.com/ROCm-Developer-Tools/ROCgdb/
[2] https://github.com/ROCm-Developer-Tools/ROCdbgapi
Change-Id: I836135531a29214b21695736deb0a81acf8cf566
|
|
The current_top_target function is a hidden dependency on the current
inferior. Since I'd like to slowly move towards reducing our dependency
on the global current state, remove this function and make callers use
current_inferior ()->top_target ()
There is no expected change in behavior, but this one step towards
making those callers use the inferior from their context, rather than
refer to the global current inferior.
gdb/ChangeLog:
* target.h (current_top_target): Remove, make callers use the
current inferior instead.
* target.c (current_top_target): Remove.
Change-Id: Iccd457036f84466cdaa3865aa3f9339a24ea001d
|
|
The following patch removes the current_top_target function, replacing
uses with `current_inferior ()->top_target ()`. This is a problem for
uses in target.h, because they don't have access to the current_inferior
function and the inferior structure: target.h can't include inferior.h,
otherwise that would make a cyclic inclusion.
Avoid this by moving all implementations of the wrappers that call
target methods with the current target to target.c. Many of them are
changed from a macro to a function, which is an improvement for
readability and debuggability, IMO.
target_shortname and target_longname were not function-like macros, so a
few adjustments are needed.
gdb/ChangeLog:
* target.h (target_shortname): Change to function declaration.
(target_longname): Likewise.
(target_attach_no_wait): Likewise.
(target_post_attach): Likewise.
(target_prepare_to_store): Likewise.
(target_supports_enable_disable_tracepoint): Likewise.
(target_supports_string_tracing): Likewise.
(target_supports_evaluation_of_breakpoint_conditions): Likewise.
(target_supports_dumpcore): Likewise.
(target_dumpcore): Likewise.
(target_can_run_breakpoint_commands): Likewise.
(target_files_info): Likewise.
(target_post_startup_inferior): Likewise.
(target_insert_fork_catchpoint): Likewise.
(target_remove_fork_catchpoint): Likewise.
(target_insert_vfork_catchpoint): Likewise.
(target_remove_vfork_catchpoint): Likewise.
(target_insert_exec_catchpoint): Likewise.
(target_remove_exec_catchpoint): Likewise.
(target_set_syscall_catchpoint): Likewise.
(target_rcmd): Likewise.
(target_can_lock_scheduler): Likewise.
(target_can_async_p): Likewise.
(target_is_async_p): Likewise.
(target_execution_direction): Likewise.
(target_extra_thread_info): Likewise.
(target_pid_to_exec_file): Likewise.
(target_thread_architecture): Likewise.
(target_find_memory_regions): Likewise.
(target_make_corefile_notes): Likewise.
(target_get_bookmark): Likewise.
(target_goto_bookmark): Likewise.
(target_stopped_by_watchpoint): Likewise.
(target_stopped_by_sw_breakpoint): Likewise.
(target_supports_stopped_by_sw_breakpoint): Likewise.
(target_stopped_by_hw_breakpoint): Likewise.
(target_supports_stopped_by_hw_breakpoint): Likewise.
(target_have_steppable_watchpoint): Likewise.
(target_can_use_hardware_watchpoint): Likewise.
(target_region_ok_for_hw_watchpoint): Likewise.
(target_can_do_single_step): Likewise.
(target_insert_watchpoint): Likewise.
(target_remove_watchpoint): Likewise.
(target_insert_hw_breakpoint): Likewise.
(target_remove_hw_breakpoint): Likewise.
(target_can_accel_watchpoint_condition): Likewise.
(target_can_execute_reverse): Likewise.
(target_get_ada_task_ptid): Likewise.
(target_filesystem_is_local): Likewise.
(target_trace_init): Likewise.
(target_download_tracepoint): Likewise.
(target_can_download_tracepoint): Likewise.
(target_download_trace_state_variable): Likewise.
(target_enable_tracepoint): Likewise.
(target_disable_tracepoint): Likewise.
(target_trace_start): Likewise.
(target_trace_set_readonly_regions): Likewise.
(target_get_trace_status): Likewise.
(target_get_tracepoint_status): Likewise.
(target_trace_stop): Likewise.
(target_trace_find): Likewise.
(target_get_trace_state_variable_value): Likewise.
(target_save_trace_data): Likewise.
(target_upload_tracepoints): Likewise.
(target_upload_trace_state_variables): Likewise.
(target_get_raw_trace_data): Likewise.
(target_get_min_fast_tracepoint_insn_len): Likewise.
(target_set_disconnected_tracing): Likewise.
(target_set_circular_trace_buffer): Likewise.
(target_set_trace_buffer_size): Likewise.
(target_set_trace_notes): Likewise.
(target_get_tib_address): Likewise.
(target_set_permissions): Likewise.
(target_static_tracepoint_marker_at): Likewise.
(target_static_tracepoint_markers_by_strid): Likewise.
(target_traceframe_info): Likewise.
(target_use_agent): Likewise.
(target_can_use_agent): Likewise.
(target_augmented_libraries_svr4_read): Likewise.
(target_log_command): Likewise.
* target.c (target_shortname): New.
(target_longname): New.
(target_attach_no_wait): New.
(target_post_attach): New.
(target_prepare_to_store): New.
(target_supports_enable_disable_tracepoint): New.
(target_supports_string_tracing): New.
(target_supports_evaluation_of_breakpoint_conditions): New.
(target_supports_dumpcore): New.
(target_dumpcore): New.
(target_can_run_breakpoint_commands): New.
(target_files_info): New.
(target_post_startup_inferior): New.
(target_insert_fork_catchpoint): New.
(target_remove_fork_catchpoint): New.
(target_insert_vfork_catchpoint): New.
(target_remove_vfork_catchpoint): New.
(target_insert_exec_catchpoint): New.
(target_remove_exec_catchpoint): New.
(target_set_syscall_catchpoint): New.
(target_rcmd): New.
(target_can_lock_scheduler): New.
(target_can_async_p): New.
(target_is_async_p): New.
(target_execution_direction): New.
(target_extra_thread_info): New.
(target_pid_to_exec_file): New.
(target_thread_architecture): New.
(target_find_memory_regions): New.
(target_make_corefile_notes): New.
(target_get_bookmark): New.
(target_goto_bookmark): New.
(target_stopped_by_watchpoint): New.
(target_stopped_by_sw_breakpoint): New.
(target_supports_stopped_by_sw_breakpoint): New.
(target_stopped_by_hw_breakpoint): New.
(target_supports_stopped_by_hw_breakpoint): New.
(target_have_steppable_watchpoint): New.
(target_can_use_hardware_watchpoint): New.
(target_region_ok_for_hw_watchpoint): New.
(target_can_do_single_step): New.
(target_insert_watchpoint): New.
(target_remove_watchpoint): New.
(target_insert_hw_breakpoint): New.
(target_remove_hw_breakpoint): New.
(target_can_accel_watchpoint_condition): New.
(target_can_execute_reverse): New.
(target_get_ada_task_ptid): New.
(target_filesystem_is_local): New.
(target_trace_init): New.
(target_download_tracepoint): New.
(target_can_download_tracepoint): New.
(target_download_trace_state_variable): New.
(target_enable_tracepoint): New.
(target_disable_tracepoint): New.
(target_trace_start): New.
(target_trace_set_readonly_regions): New.
(target_get_trace_status): New.
(target_get_tracepoint_status): New.
(target_trace_stop): New.
(target_trace_find): New.
(target_get_trace_state_variable_value): New.
(target_save_trace_data): New.
(target_upload_tracepoints): New.
(target_upload_trace_state_variables): New.
(target_get_raw_trace_data): New.
(target_get_min_fast_tracepoint_insn_len): New.
(target_set_disconnected_tracing): New.
(target_set_circular_trace_buffer): New.
(target_set_trace_buffer_size): New.
(target_set_trace_notes): New.
(target_get_tib_address): New.
(target_set_permissions): New.
(target_static_tracepoint_marker_at): New.
(target_static_tracepoint_markers_by_strid): New.
(target_traceframe_info): New.
(target_use_agent): New.
(target_can_use_agent): New.
(target_augmented_libraries_svr4_read): New.
(target_log_command): New.
* bfin-tdep.c (bfin_sw_breakpoint_from_kind): Adjust.
* infrun.c (set_schedlock_func): Adjust.
* mi/mi-main.c (exec_reverse_continue): Adjust.
* reverse.c (exec_reverse_once): Adjust.
* sh-tdep.c (sh_sw_breakpoint_from_kind): Adjust.
* tui/tui-stack.c (tui_locator_window::make_status_line): Adjust.
* remote-sim.c (gdbsim_target::detach): Adjust.
(gdbsim_target::files_info): Adjust.
Change-Id: I72ef56e9a25adeb0b91f1ad05e34c89f77ebeaa8
|
|
An extra \n in calls to fprintf_unfiltered() caused invalid MI records
to be emitted:
> gdb -i mi3 -ex "target remote :7000"
=thread-group-added,id="i1"
~"GNU gdb (GDB) 11.0.50.20201019-git\n"
~"Copyright (C) 2020 Free Software Foundation, Inc.\n"
...
~"Remote debugging using :7001\n"
=tsv-created,name="trace_timestamp",initial="0"\n
=thread-group-started,id="i1",pid="304973"
This commit fixes the problem.
gdb/ChangeLog:
* gdb/mi/mi-interp.c (mi_traceframe_changed): Remove trailing \n from output.
(mi_tsv_created): Likewise.
(mi_tsv_deleted): Likewise.
|
|
I'm trying to enable clang's -Wmissing-variable-declarations warning.
This patch fixes all the obvious spots where we can simply add "static"
(at least, found when building on x86-64 Linux).
gdb/ChangeLog:
* aarch64-linux-tdep.c (aarch64_linux_record_tdep): Make static.
* aarch64-tdep.c (tdesc_aarch64_list, aarch64_prologue_unwind,
aarch64_stub_unwind, aarch64_normal_base, ): Make static.
* arm-linux-tdep.c (arm_prologue_unwind): Make static.
* arm-tdep.c (struct frame_unwind): Make static.
* auto-load.c (auto_load_safe_path_vec): Make static.
* csky-tdep.c (csky_stub_unwind): Make static.
* gdbarch.c (gdbarch_data_registry): Make static.
* gnu-v2-abi.c (gnu_v2_abi_ops): Make static.
* i386-netbsd-tdep.c (i386nbsd_mc_reg_offset): Make static.
* i386-tdep.c (i386_frame_setup_skip_insns,
i386_tramp_chain_in_reg_insns, i386_tramp_chain_on_stack_insns):
Make static.
* infrun.c (observer_mode): Make static.
* linux-nat.c (sigchld_action): Make static.
* linux-thread-db.c (thread_db_list): Make static.
* maint-test-options.c (maintenance_test_options_list):
* mep-tdep.c (mep_csr_registers): Make static.
* mi/mi-cmds.c (struct mi_cmd_stats): Remove struct type name.
(stats): Make static.
* nat/linux-osdata.c (struct osdata_type): Make static.
* ppc-netbsd-tdep.c (ppcnbsd_reg_offsets): Make static.
* progspace.c (last_program_space_num): Make static.
* python/py-param.c (struct parm_constant): Remove struct type
name.
(parm_constants): Make static.
* python/py-record-btrace.c (btpy_list_methods): Make static.
* python/py-record.c (recpy_gap_type): Make static.
* record.c (record_goto_cmdlist): Make static.
* regcache.c (regcache_descr_handle): Make static.
* registry.h (DEFINE_REGISTRY): Make definition static.
* symmisc.c (std_in, std_out, std_err): Make static.
* top.c (previous_saved_command_line): Make static.
* tracepoint.c (trace_user, trace_notes, trace_stop_notes): Make
static.
* unittests/command-def-selftests.c (nr_duplicates,
nr_invalid_prefixcmd, lists): Make static.
* unittests/observable-selftests.c (test_notification): Make
static.
* unittests/optional/assignment/1.cc (counter): Make static.
* unittests/optional/assignment/2.cc (counter): Make static.
* unittests/optional/assignment/3.cc (counter): Make static.
* unittests/optional/assignment/4.cc (counter): Make static.
* unittests/optional/assignment/5.cc (counter): Make static.
* unittests/optional/assignment/6.cc (counter): Make static.
gdbserver/ChangeLog:
* ax.cc (bytecode_address_table): Make static.
* debug.cc (debug_file): Make static.
* linux-low.cc (stopping_threads): Make static.
(step_over_bkpt): Make static.
* linux-x86-low.cc (amd64_emit_ops, i386_emit_ops): Make static.
* tracepoint.cc (stop_tracing_bkpt, flush_trace_buffer_bkpt,
alloced_trace_state_variables, trace_buffer_ctrl,
tracing_start_time, tracing_stop_time, tracing_user_name,
tracing_notes, tracing_stop_note): Make static.
Change-Id: Ic1d8034723b7802502bda23770893be2338ab020
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
Add a progress meter. It's not used anywhere yet.
gdb/ChangeLog:
2020-12-16 Tom Tromey <tom@tromey.com>
Tom Tromey <tromey@redhat.com>
Tom de Vries <tdevries@suse.de>
* utils.h (get_chars_per_line): Declare.
* utils.c (get_chars_per_line): New function.
(fputs_maybe_filtered): Handle '\r'.
* ui-out.h (ui_out::progress_meter): New class.
(ui_out::progress, ui_out::do_progress_start)
(ui_out::do_progress_notify, ui_out::do_progress_end): New
methods.
* ui-out.c (do_progress_end)
(make_cleanup_ui_out_progress_begin_end, ui_out_progress): New
functions.
* mi/mi-out.h (mi_ui_out::do_progress_start)
(mi_ui_out::do_progress_notify, mi_ui_out::do_progress_end): New
methods.
* cli-out.h (struct cli_ui_out) <do_progress_start,
do_progress_notify, do_progress_end>: New methods.
<enum meter_stat, struct cli_progress_info>: New.
<m_meters>: New member.
* cli-out.c (cli_ui_out::do_progress_start)
(cli_ui_out::do_progress_notify, cli_ui_out::do_progress_end): New
methods.
|
|
This changes all_root_varobjs to take a function_view. This
simplifies some of the callers, in particular we can remove a data
type that only existed to be passed through.
gdb/ChangeLog
2020-12-11 Tom Tromey <tom@tromey.com>
* varobj.h (all_root_varobjs): Take a function_view.
* varobj.c (all_root_varobjs): Take a function_view.
(varobj_invalidate_iter): Remove unused parameter.
(varobj_invalidate): Update.
* mi/mi-cmd-var.c (struct mi_cmd_var_update): Remove.
(mi_cmd_var_update_iter): Change parameters.
|
|
A little int to bool conversion around the 'watch' type commands.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* breakpoint.c (update_watchpoint): Pass 'false' not '0'.
(watch_command_1): Update parameter types. Convert locals to
bool.
(watch_command_wrapper): Change parameter type.
(watch_maybe_just_location): Change locals to bool.
(rwatch_command_wrapper): Update parameter type.
(awatch_command_wrapper): Update parameter type.
* breakpoint.h (watch_command_wrapper): Change parameter type.
(rwatch_command_wrapper): Update parameter type.
(awatch_command_wrapper): Update parameter type.
* eval.c (fetch_subexp_value): Change parameter type.
* ppc-linux-nat.c (ppc_linux_nat_target::check_condition): Pass
'false' not '0'.
* value.h (fetch_subexp_value): Change parameter type in
declaration.
|
|
Many spots incorrectly use only spaces for indentation (for example,
there are a lot of spots in ada-lang.c). I've always found it awkward
when I needed to edit one of these spots: do I keep the original wrong
indentation, or do I fix it? What if the lines around it are also
wrong, do I fix them too? I probably don't want to fix them in the same
patch, to avoid adding noise to my patch.
So I propose to fix as much as possible once and for all (hopefully).
One typical counter argument for this is that it makes code archeology
more difficult, because git-blame will show this commit as the last
change for these lines. My counter counter argument is: when
git-blaming, you often need to do "blame the file at the parent commit"
anyway, to go past some other refactor that touched the line you are
interested in, but is not the change you are looking for. So you
already need a somewhat efficient way to do this.
Using some interactive tool, rather than plain git-blame, makes this
trivial. For example, I use "tig blame <file>", where going back past
the commit that changed the currently selected line is one keystroke.
It looks like Magit in Emacs does it too (though I've never used it).
Web viewers of Github and Gitlab do it too. My point is that it won't
really make archeology more difficult.
The other typical counter argument is that it will cause conflicts with
existing patches. That's true... but it's a one time cost, and those
are not conflicts that are difficult to resolve. I have also tried "git
rebase --ignore-whitespace", it seems to work well. Although that will
re-introduce the faulty indentation, so one needs to take care of fixing
the indentation in the patch after that (which is easy).
gdb/ChangeLog:
* aarch64-linux-tdep.c: Fix indentation.
* aarch64-ravenscar-thread.c: Fix indentation.
* aarch64-tdep.c: Fix indentation.
* aarch64-tdep.h: Fix indentation.
* ada-lang.c: Fix indentation.
* ada-lang.h: Fix indentation.
* ada-tasks.c: Fix indentation.
* ada-typeprint.c: Fix indentation.
* ada-valprint.c: Fix indentation.
* ada-varobj.c: Fix indentation.
* addrmap.c: Fix indentation.
* addrmap.h: Fix indentation.
* agent.c: Fix indentation.
* aix-thread.c: Fix indentation.
* alpha-bsd-nat.c: Fix indentation.
* alpha-linux-tdep.c: Fix indentation.
* alpha-mdebug-tdep.c: Fix indentation.
* alpha-nbsd-tdep.c: Fix indentation.
* alpha-obsd-tdep.c: Fix indentation.
* alpha-tdep.c: Fix indentation.
* amd64-bsd-nat.c: Fix indentation.
* amd64-darwin-tdep.c: Fix indentation.
* amd64-linux-nat.c: Fix indentation.
* amd64-linux-tdep.c: Fix indentation.
* amd64-nat.c: Fix indentation.
* amd64-obsd-tdep.c: Fix indentation.
* amd64-tdep.c: Fix indentation.
* amd64-windows-tdep.c: Fix indentation.
* annotate.c: Fix indentation.
* arc-tdep.c: Fix indentation.
* arch-utils.c: Fix indentation.
* arch/arm-get-next-pcs.c: Fix indentation.
* arch/arm.c: Fix indentation.
* arm-linux-nat.c: Fix indentation.
* arm-linux-tdep.c: Fix indentation.
* arm-nbsd-tdep.c: Fix indentation.
* arm-pikeos-tdep.c: Fix indentation.
* arm-tdep.c: Fix indentation.
* arm-tdep.h: Fix indentation.
* arm-wince-tdep.c: Fix indentation.
* auto-load.c: Fix indentation.
* auxv.c: Fix indentation.
* avr-tdep.c: Fix indentation.
* ax-gdb.c: Fix indentation.
* ax-general.c: Fix indentation.
* bfin-linux-tdep.c: Fix indentation.
* block.c: Fix indentation.
* block.h: Fix indentation.
* blockframe.c: Fix indentation.
* bpf-tdep.c: Fix indentation.
* break-catch-sig.c: Fix indentation.
* break-catch-syscall.c: Fix indentation.
* break-catch-throw.c: Fix indentation.
* breakpoint.c: Fix indentation.
* breakpoint.h: Fix indentation.
* bsd-uthread.c: Fix indentation.
* btrace.c: Fix indentation.
* build-id.c: Fix indentation.
* buildsym-legacy.h: Fix indentation.
* buildsym.c: Fix indentation.
* c-typeprint.c: Fix indentation.
* c-valprint.c: Fix indentation.
* c-varobj.c: Fix indentation.
* charset.c: Fix indentation.
* cli/cli-cmds.c: Fix indentation.
* cli/cli-decode.c: Fix indentation.
* cli/cli-decode.h: Fix indentation.
* cli/cli-script.c: Fix indentation.
* cli/cli-setshow.c: Fix indentation.
* coff-pe-read.c: Fix indentation.
* coffread.c: Fix indentation.
* compile/compile-cplus-types.c: Fix indentation.
* compile/compile-object-load.c: Fix indentation.
* compile/compile-object-run.c: Fix indentation.
* completer.c: Fix indentation.
* corefile.c: Fix indentation.
* corelow.c: Fix indentation.
* cp-abi.h: Fix indentation.
* cp-namespace.c: Fix indentation.
* cp-support.c: Fix indentation.
* cp-valprint.c: Fix indentation.
* cris-linux-tdep.c: Fix indentation.
* cris-tdep.c: Fix indentation.
* darwin-nat-info.c: Fix indentation.
* darwin-nat.c: Fix indentation.
* darwin-nat.h: Fix indentation.
* dbxread.c: Fix indentation.
* dcache.c: Fix indentation.
* disasm.c: Fix indentation.
* dtrace-probe.c: Fix indentation.
* dwarf2/abbrev.c: Fix indentation.
* dwarf2/attribute.c: Fix indentation.
* dwarf2/expr.c: Fix indentation.
* dwarf2/frame.c: Fix indentation.
* dwarf2/index-cache.c: Fix indentation.
* dwarf2/index-write.c: Fix indentation.
* dwarf2/line-header.c: Fix indentation.
* dwarf2/loc.c: Fix indentation.
* dwarf2/macro.c: Fix indentation.
* dwarf2/read.c: Fix indentation.
* dwarf2/read.h: Fix indentation.
* elfread.c: Fix indentation.
* eval.c: Fix indentation.
* event-top.c: Fix indentation.
* exec.c: Fix indentation.
* exec.h: Fix indentation.
* expprint.c: Fix indentation.
* f-lang.c: Fix indentation.
* f-typeprint.c: Fix indentation.
* f-valprint.c: Fix indentation.
* fbsd-nat.c: Fix indentation.
* fbsd-tdep.c: Fix indentation.
* findvar.c: Fix indentation.
* fork-child.c: Fix indentation.
* frame-unwind.c: Fix indentation.
* frame-unwind.h: Fix indentation.
* frame.c: Fix indentation.
* frv-linux-tdep.c: Fix indentation.
* frv-tdep.c: Fix indentation.
* frv-tdep.h: Fix indentation.
* ft32-tdep.c: Fix indentation.
* gcore.c: Fix indentation.
* gdb_bfd.c: Fix indentation.
* gdbarch.sh: Fix indentation.
* gdbarch.c: Re-generate
* gdbarch.h: Re-generate.
* gdbcore.h: Fix indentation.
* gdbthread.h: Fix indentation.
* gdbtypes.c: Fix indentation.
* gdbtypes.h: Fix indentation.
* glibc-tdep.c: Fix indentation.
* gnu-nat.c: Fix indentation.
* gnu-nat.h: Fix indentation.
* gnu-v2-abi.c: Fix indentation.
* gnu-v3-abi.c: Fix indentation.
* go32-nat.c: Fix indentation.
* guile/guile-internal.h: Fix indentation.
* guile/scm-cmd.c: Fix indentation.
* guile/scm-frame.c: Fix indentation.
* guile/scm-iterator.c: Fix indentation.
* guile/scm-math.c: Fix indentation.
* guile/scm-ports.c: Fix indentation.
* guile/scm-pretty-print.c: Fix indentation.
* guile/scm-value.c: Fix indentation.
* h8300-tdep.c: Fix indentation.
* hppa-linux-nat.c: Fix indentation.
* hppa-linux-tdep.c: Fix indentation.
* hppa-nbsd-nat.c: Fix indentation.
* hppa-nbsd-tdep.c: Fix indentation.
* hppa-obsd-nat.c: Fix indentation.
* hppa-tdep.c: Fix indentation.
* hppa-tdep.h: Fix indentation.
* i386-bsd-nat.c: Fix indentation.
* i386-darwin-nat.c: Fix indentation.
* i386-darwin-tdep.c: Fix indentation.
* i386-dicos-tdep.c: Fix indentation.
* i386-gnu-nat.c: Fix indentation.
* i386-linux-nat.c: Fix indentation.
* i386-linux-tdep.c: Fix indentation.
* i386-nto-tdep.c: Fix indentation.
* i386-obsd-tdep.c: Fix indentation.
* i386-sol2-nat.c: Fix indentation.
* i386-tdep.c: Fix indentation.
* i386-tdep.h: Fix indentation.
* i386-windows-tdep.c: Fix indentation.
* i387-tdep.c: Fix indentation.
* i387-tdep.h: Fix indentation.
* ia64-libunwind-tdep.c: Fix indentation.
* ia64-libunwind-tdep.h: Fix indentation.
* ia64-linux-nat.c: Fix indentation.
* ia64-linux-tdep.c: Fix indentation.
* ia64-tdep.c: Fix indentation.
* ia64-tdep.h: Fix indentation.
* ia64-vms-tdep.c: Fix indentation.
* infcall.c: Fix indentation.
* infcmd.c: Fix indentation.
* inferior.c: Fix indentation.
* infrun.c: Fix indentation.
* iq2000-tdep.c: Fix indentation.
* language.c: Fix indentation.
* linespec.c: Fix indentation.
* linux-fork.c: Fix indentation.
* linux-nat.c: Fix indentation.
* linux-tdep.c: Fix indentation.
* linux-thread-db.c: Fix indentation.
* lm32-tdep.c: Fix indentation.
* m2-lang.c: Fix indentation.
* m2-typeprint.c: Fix indentation.
* m2-valprint.c: Fix indentation.
* m32c-tdep.c: Fix indentation.
* m32r-linux-tdep.c: Fix indentation.
* m32r-tdep.c: Fix indentation.
* m68hc11-tdep.c: Fix indentation.
* m68k-bsd-nat.c: Fix indentation.
* m68k-linux-nat.c: Fix indentation.
* m68k-linux-tdep.c: Fix indentation.
* m68k-tdep.c: Fix indentation.
* machoread.c: Fix indentation.
* macrocmd.c: Fix indentation.
* macroexp.c: Fix indentation.
* macroscope.c: Fix indentation.
* macrotab.c: Fix indentation.
* macrotab.h: Fix indentation.
* main.c: Fix indentation.
* mdebugread.c: Fix indentation.
* mep-tdep.c: Fix indentation.
* mi/mi-cmd-catch.c: Fix indentation.
* mi/mi-cmd-disas.c: Fix indentation.
* mi/mi-cmd-env.c: Fix indentation.
* mi/mi-cmd-stack.c: Fix indentation.
* mi/mi-cmd-var.c: Fix indentation.
* mi/mi-cmds.c: Fix indentation.
* mi/mi-main.c: Fix indentation.
* mi/mi-parse.c: Fix indentation.
* microblaze-tdep.c: Fix indentation.
* minidebug.c: Fix indentation.
* minsyms.c: Fix indentation.
* mips-linux-nat.c: Fix indentation.
* mips-linux-tdep.c: Fix indentation.
* mips-nbsd-tdep.c: Fix indentation.
* mips-tdep.c: Fix indentation.
* mn10300-linux-tdep.c: Fix indentation.
* mn10300-tdep.c: Fix indentation.
* moxie-tdep.c: Fix indentation.
* msp430-tdep.c: Fix indentation.
* namespace.h: Fix indentation.
* nat/fork-inferior.c: Fix indentation.
* nat/gdb_ptrace.h: Fix indentation.
* nat/linux-namespaces.c: Fix indentation.
* nat/linux-osdata.c: Fix indentation.
* nat/netbsd-nat.c: Fix indentation.
* nat/x86-dregs.c: Fix indentation.
* nbsd-nat.c: Fix indentation.
* nbsd-tdep.c: Fix indentation.
* nios2-linux-tdep.c: Fix indentation.
* nios2-tdep.c: Fix indentation.
* nto-procfs.c: Fix indentation.
* nto-tdep.c: Fix indentation.
* objfiles.c: Fix indentation.
* objfiles.h: Fix indentation.
* opencl-lang.c: Fix indentation.
* or1k-tdep.c: Fix indentation.
* osabi.c: Fix indentation.
* osabi.h: Fix indentation.
* osdata.c: Fix indentation.
* p-lang.c: Fix indentation.
* p-typeprint.c: Fix indentation.
* p-valprint.c: Fix indentation.
* parse.c: Fix indentation.
* ppc-linux-nat.c: Fix indentation.
* ppc-linux-tdep.c: Fix indentation.
* ppc-nbsd-nat.c: Fix indentation.
* ppc-nbsd-tdep.c: Fix indentation.
* ppc-obsd-nat.c: Fix indentation.
* ppc-ravenscar-thread.c: Fix indentation.
* ppc-sysv-tdep.c: Fix indentation.
* ppc64-tdep.c: Fix indentation.
* printcmd.c: Fix indentation.
* proc-api.c: Fix indentation.
* producer.c: Fix indentation.
* producer.h: Fix indentation.
* prologue-value.c: Fix indentation.
* prologue-value.h: Fix indentation.
* psymtab.c: Fix indentation.
* python/py-arch.c: Fix indentation.
* python/py-bpevent.c: Fix indentation.
* python/py-event.c: Fix indentation.
* python/py-event.h: Fix indentation.
* python/py-finishbreakpoint.c: Fix indentation.
* python/py-frame.c: Fix indentation.
* python/py-framefilter.c: Fix indentation.
* python/py-inferior.c: Fix indentation.
* python/py-infthread.c: Fix indentation.
* python/py-objfile.c: Fix indentation.
* python/py-prettyprint.c: Fix indentation.
* python/py-registers.c: Fix indentation.
* python/py-signalevent.c: Fix indentation.
* python/py-stopevent.c: Fix indentation.
* python/py-stopevent.h: Fix indentation.
* python/py-threadevent.c: Fix indentation.
* python/py-tui.c: Fix indentation.
* python/py-unwind.c: Fix indentation.
* python/py-value.c: Fix indentation.
* python/py-xmethods.c: Fix indentation.
* python/python-internal.h: Fix indentation.
* python/python.c: Fix indentation.
* ravenscar-thread.c: Fix indentation.
* record-btrace.c: Fix indentation.
* record-full.c: Fix indentation.
* record.c: Fix indentation.
* reggroups.c: Fix indentation.
* regset.h: Fix indentation.
* remote-fileio.c: Fix indentation.
* remote.c: Fix indentation.
* reverse.c: Fix indentation.
* riscv-linux-tdep.c: Fix indentation.
* riscv-ravenscar-thread.c: Fix indentation.
* riscv-tdep.c: Fix indentation.
* rl78-tdep.c: Fix indentation.
* rs6000-aix-tdep.c: Fix indentation.
* rs6000-lynx178-tdep.c: Fix indentation.
* rs6000-nat.c: Fix indentation.
* rs6000-tdep.c: Fix indentation.
* rust-lang.c: Fix indentation.
* rx-tdep.c: Fix indentation.
* s12z-tdep.c: Fix indentation.
* s390-linux-tdep.c: Fix indentation.
* score-tdep.c: Fix indentation.
* ser-base.c: Fix indentation.
* ser-mingw.c: Fix indentation.
* ser-uds.c: Fix indentation.
* ser-unix.c: Fix indentation.
* serial.c: Fix indentation.
* sh-linux-tdep.c: Fix indentation.
* sh-nbsd-tdep.c: Fix indentation.
* sh-tdep.c: Fix indentation.
* skip.c: Fix indentation.
* sol-thread.c: Fix indentation.
* solib-aix.c: Fix indentation.
* solib-darwin.c: Fix indentation.
* solib-frv.c: Fix indentation.
* solib-svr4.c: Fix indentation.
* solib.c: Fix indentation.
* source.c: Fix indentation.
* sparc-linux-tdep.c: Fix indentation.
* sparc-nbsd-tdep.c: Fix indentation.
* sparc-obsd-tdep.c: Fix indentation.
* sparc-ravenscar-thread.c: Fix indentation.
* sparc-tdep.c: Fix indentation.
* sparc64-linux-tdep.c: Fix indentation.
* sparc64-nbsd-tdep.c: Fix indentation.
* sparc64-obsd-tdep.c: Fix indentation.
* sparc64-tdep.c: Fix indentation.
* stabsread.c: Fix indentation.
* stack.c: Fix indentation.
* stap-probe.c: Fix indentation.
* stubs/ia64vms-stub.c: Fix indentation.
* stubs/m32r-stub.c: Fix indentation.
* stubs/m68k-stub.c: Fix indentation.
* stubs/sh-stub.c: Fix indentation.
* stubs/sparc-stub.c: Fix indentation.
* symfile-mem.c: Fix indentation.
* symfile.c: Fix indentation.
* symfile.h: Fix indentation.
* symmisc.c: Fix indentation.
* symtab.c: Fix indentation.
* symtab.h: Fix indentation.
* target-float.c: Fix indentation.
* target.c: Fix indentation.
* target.h: Fix indentation.
* tic6x-tdep.c: Fix indentation.
* tilegx-linux-tdep.c: Fix indentation.
* tilegx-tdep.c: Fix indentation.
* top.c: Fix indentation.
* tracefile-tfile.c: Fix indentation.
* tracepoint.c: Fix indentation.
* tui/tui-disasm.c: Fix indentation.
* tui/tui-io.c: Fix indentation.
* tui/tui-regs.c: Fix indentation.
* tui/tui-stack.c: Fix indentation.
* tui/tui-win.c: Fix indentation.
* tui/tui-winsource.c: Fix indentation.
* tui/tui.c: Fix indentation.
* typeprint.c: Fix indentation.
* ui-out.h: Fix indentation.
* unittests/copy_bitwise-selftests.c: Fix indentation.
* unittests/memory-map-selftests.c: Fix indentation.
* utils.c: Fix indentation.
* v850-tdep.c: Fix indentation.
* valarith.c: Fix indentation.
* valops.c: Fix indentation.
* valprint.c: Fix indentation.
* valprint.h: Fix indentation.
* value.c: Fix indentation.
* value.h: Fix indentation.
* varobj.c: Fix indentation.
* vax-tdep.c: Fix indentation.
* windows-nat.c: Fix indentation.
* windows-tdep.c: Fix indentation.
* xcoffread.c: Fix indentation.
* xml-syscall.c: Fix indentation.
* xml-tdesc.c: Fix indentation.
* xstormy16-tdep.c: Fix indentation.
* xtensa-config.c: Fix indentation.
* xtensa-linux-nat.c: Fix indentation.
* xtensa-linux-tdep.c: Fix indentation.
* xtensa-tdep.c: Fix indentation.
gdbserver/ChangeLog:
* ax.cc: Fix indentation.
* dll.cc: Fix indentation.
* inferiors.h: Fix indentation.
* linux-low.cc: Fix indentation.
* linux-nios2-low.cc: Fix indentation.
* linux-ppc-ipa.cc: Fix indentation.
* linux-ppc-low.cc: Fix indentation.
* linux-x86-low.cc: Fix indentation.
* linux-xtensa-low.cc: Fix indentation.
* regcache.cc: Fix indentation.
* server.cc: Fix indentation.
* tracepoint.cc: Fix indentation.
gdbsupport/ChangeLog:
* common-exceptions.h: Fix indentation.
* event-loop.cc: Fix indentation.
* fileio.cc: Fix indentation.
* filestuff.cc: Fix indentation.
* gdb-dlfcn.cc: Fix indentation.
* gdb_string_view.h: Fix indentation.
* job-control.cc: Fix indentation.
* signals.cc: Fix indentation.
Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695
|
|
This removes the exec_filename macro, replacing it with uses of the
member of current_program_space. This also renames that member, and
changes it to be a unique pointer.
gdb/ChangeLog
2020-10-29 Tom Tromey <tom@tromey.com>
* progspace.h (struct program_space) <exec_filename>: Rename from
pspace_exec_filename. Now a unique_xmalloc_ptr.
* inferior.c (print_selected_inferior): Update.
(print_inferior): Update.
* mi/mi-main.c (print_one_inferior): Update.
* exec.h (exec_filename): Remove macro.
* corefile.c (get_exec_file): Update.
* exec.c (exec_close): Update.
(exec_file_attach): Update.
* progspace.c (clone_program_space): Update.
(print_program_space): Update.
|
|
This changes target_can_execute_reverse from an object-like macro to
an inline function.
gdb/ChangeLog
2020-09-28 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (exec_reverse_continue)
(mi_cmd_list_target_features): Update.
* infrun.c (set_exec_direction_func): Update.
* target.c (default_execution_direction): Update.
* reverse.c (exec_reverse_once): Update.
* target.h (target_can_execute_reverse): Now a function.
|
|
This removes the target_has_registers object-like macro, replacing it
with the underlying function.
gdb/ChangeLog
2020-09-28 Tom Tromey <tom@tromey.com>
* tui/tui-regs.c (tui_get_register)
(tui_data_window::show_registers): Update.
* thread.c (scoped_restore_current_thread::restore)
(scoped_restore_current_thread::scoped_restore_current_thread):
Update.
* regcache-dump.c (regcache_print): Update.
* python/py-finishbreakpoint.c (bpfinishpy_detect_out_scope_cb):
Update.
* mi/mi-main.c (mi_cmd_data_write_register_values): Update.
* mep-tdep.c (current_me_module, current_options): Update.
* linux-thread-db.c (thread_db_load): Update.
* infcmd.c (registers_info, info_vector_command)
(info_float_command): Update.
* ia64-tdep.c (ia64_frame_prev_register)
(ia64_sigtramp_frame_prev_register): Update.
* ia64-libunwind-tdep.c (libunwind_frame_prev_register): Update.
* gcore.c (derive_stack_segment): Update.
* frame.c (get_current_frame, has_stack_frames): Update.
* findvar.c (language_defn::read_var_value): Update.
* arm-tdep.c (arm_pc_is_thumb): Update.
* target.c (target_has_registers): Rename from
target_has_registers_1.
* target.h (target_has_registers): Remove macro.
(target_has_registers): Rename from target_has_registers_1.
|
|
Convert the two language_data member variables la_name and
la_natural_name to virtual methods in language_defn struct called name
and natural_name respectively.
The virtual methods in the language_defn base class are pure virtual,
as every language must implement these, and as every language has a
unique name there's no sensible default here.
Given that every language must implement these methods I did wonder
about making this data passed into the base class constructor, but in
the end I went with the virtual method approach. I'm open to changing
this approach if people prefer the constructor approach.
During updating the calls to language_defn::name I found in
add_set_language_command a place where we took la_name and then
capitalised the first letter to create a language name that could be
used in the documentation string. I replaced this with a use of
natural_name instead as this seemed a better choice, in most cases
this will make no difference, as for most languages the natural_name
is just the name with the first character in upper case, but for some
languages, for example 'Open-CL' and 'Objective-C' this is not the
case.
In the case of asm_language the name is 'asm', while the natural_name
was previously 'assembly'. I changed the natural name to 'Assembly',
this makes the documentation string case above cleaner, however, this
will change the MI output for -var-info-expression, where the 'lang'
field will change from 'assembly' to 'Assembly'. It is possible this
could be a breaking change if a front-end is relying on the existing
name.
gdb/ChangeLog:
* ada-lang.c (ada_language_data): Remove la_name and
la_natural_name initializers.
(ada_language::name): New member function.
(ada_language::natural_name): New member function.
* c-lang.c (c_language_data): Remove la_name and
la_natural_name initializers.
(c_language::name): New member function.
(c_language::natural_name): New member function.
(cplus_language_data): Remove la_name and
la_natural_name initializers.
(cplus_language::name): New member function.
(cplus_language::natural_name): New member function.
(asm_language_data): Remove la_name and
la_natural_name initializers.
(asm_language::name): New member function.
(asm_language::natural_name): New member function.
(minimal_language_data): Remove la_name and
la_natural_name initializers.
(minimal_language::name): New member function.
(minimal_language::natural_name): New member function.
* compile/compile.c (compile_to_object): Update call to
lanugage_defn::name.
* d-lang.c (d_language_data): Remove la_name and
la_natural_name initializers.
(d_language::name): New member function.
(d_language::natural_name): New member function.
* expprint.c (print_subexp_standard): Update call to
language_defn::name.
(dump_raw_expression): Likewise
(dump_prefix_expression): Likewise.
* f-lang.c (f_language_data): Remove la_name and
la_natural_name initializers.
(f_language::name): New member function.
(f_language::natural_name): New member function.
* go-lang.c (go_language_data): Remove la_name and
la_natural_name initializers.
(go_language::name): New member function.
(go_language::natural_name): New member function.
* language.c (show_language_command): Update call to
language_defn::name.
(set_language_command): Likewise.
(language_enum): Likewise.
(language_str): Likewise.
(add_set_language_command): Likewise, use
language_defn::natural_name in the doc string.
(unknown_language_data): Remove la_name and
la_natural_name initializers.
(unknown_language::name): New member function.
(unknown_language::natural_name): New member function.
(auto_language_data): Remove la_name and
la_natural_name initializers.
(auto_language::name): New member function.
(auto_language::natural_name): New member function.
(language_lookup_primitive_type_as_symbol): Update call to
language_defn::name.
* language.h (language_data): Remove la_name and la_natural_name
member variables.
(language_defn::name): New member function.
(language_defn::natural_name): New member function.
* m2-lang.c (m2_language_data): Remove la_name and
la_natural_name initializers.
(m2_language::name): New member function.
(m2_language::natural_name): New member function.
* mi/mi-cmd-var.c (mi_cmd_var_info_expression): Update call to
language_defn::natural_name.
* objc-lang.c (objc_language_data): Remove la_name and
la_natural_name initializers.
(objc_language::name): New member function.
(objc_language::natural_name): New member function.
* opencl-lang.c (opencl_language_data): Remove la_name and
la_natural_name initializers.
(opencl_language::name): New member function.
(opencl_language::natural_name): New member function.
* p-lang.c (pascal_language_data): Remove la_name and
la_natural_name initializers.
(pascal_language::name): New member function.
(pascal_language::natural_name): New member function.
* rust-lang.c (rust_language_data): Remove la_name and
la_natural_name initializers.
(rust_language::name): New member function.
(rust_language::natural_name): New member function.
* symtab.c (lookup_language_this): Update call to
language_defn::name.
|
|
Currently -break-insert always creates a wildmatching breakpoint, and
there's no way to ask for a fullname match. To address that, this
patch adds the equivalent of "break -qualified" to MI:
"-break-insert --qualified".
For the testcase, curiously, it doesn't look like we have _any_
testcase that tests a breakpoint with multiple locations, and, the
existing mi_create_breakpoint / mi_make_breakpoint procedures are only
good for breakpoints with a single location. This patch thus adds a
few new companion routines to mi-support.exp for breakpoints with
multiple locations: mi_create_breakpoint_multi,
mi_make_breakpoint_loc, mi_make_breakpoint_multi.
gdb/ChangeLog:
* NEWS: Document "-break-insert --qualified".
* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Handle "--qualified".
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Breakpoint Commands): Document
"-break-insert --qualified" and "-dprintf-insert --qualified".
gdb/testsuite/ChangeLog:
* gdb.mi/mi-break-qualified.cc: New file.
* gdb.mi/mi-break-qualified.exp: New file.
* lib/mi-support.exp (mi_create_breakpoint_multi)
(mi_make_breakpoint_loc, mi_make_breakpoint_multi): New
procedures.
(mi_create_breakpoint_1): New, factored out from
mi_create_breakpoint.
|
|
-stack-list-arguments will crash when stopped in an Ada procedure that
has an argument with a certain name ("_objectO" -- which can only be
generated by the compiler). The bug occurs because lookup_symbol will
fail in this case.
This patch changes -stack-list-arguments to mirror what is done with
arguments elsewhere. (As an aside, I don't understand why this lookup
is even needed, but I assume it is some stabs thing?)
In the longer term I think it would be good to share this code between
MI and the CLI. However, due to the upcoming release, I preferred a
more local fix.
gdb/ChangeLog
2020-07-22 Tom Tromey <tromey@adacore.com>
* mi/mi-cmd-stack.c (list_args_or_locals): Use
lookup_symbol_search_name.
gdb/testsuite/ChangeLog
2020-07-22 Tom Tromey <tromey@adacore.com>
* gdb.ada/mi_prot.exp: New file.
* gdb.ada/mi_prot/pkg.adb: New file.
* gdb.ada/mi_prot/pkg.ads: New file.
* gdb.ada/mi_prot/prot.adb: New file.
|
|
This converts the get_inferior_io_terminal and
set_inferior_io_terminal free functions to inferior methods.
Since the related commands are called "tty", "{set,show}
inferior-tty", and MI's "-inferior-tty-{set,show}", to make the
connection between the commands and the code more obvious, the methods
are named set_tty/tty instead of set_io_terminal/io_terminal.
gdb/ChangeLog:
* fork-child.c (prefork_hook): Adjust.
* infcmd.c (set_inferior_io_terminal, get_inferior_io_terminal):
Delete.
(set_inferior_tty_command, show_inferior_tty_command): Adjust.
* inferior.c (inferior::set_tty, inferior::tty): New methods.
* inferior.h (set_inferior_io_terminal, get_inferior_io_terminal):
Remove declarations.
(struct inferior) <set_tty, tty>: New methods.
(struct inferior) <terminal>: Rename to ...
(struct inferior) <m_terminal>: ... this and make private.
* main.c (captured_main_1): Adjust.
* mi/mi-cmd-env.c (mi_cmd_inferior_tty_set): Adjust.
(mi_cmd_inferior_tty_show): Adjust.
* nto-procfs.c (nto_procfs_target::create_inferior): Adjust.
* windows-nat.c (windows_nat_target::create_inferior): Adjust.
|
|
Remove TYPE_CODE, changing all the call sites to use type::code
directly. This is quite a big diff, but this was mostly done using sed
and coccinelle. A few call sites were done by hand.
gdb/ChangeLog:
* gdbtypes.h (TYPE_CODE): Remove. Change all call sites to use
type::code instead.
|
|
This patch started as an attempt to replace ALL_SO_LIBS with an
ordinary C++ iterator. However, then I tripped over the so_list_head
define again, and decided to remove it as well.
gdb/ChangeLog
2020-05-08 Tom Tromey <tom@tromey.com>
* mi/mi-cmd-file.c (mi_cmd_file_list_shared_libraries): Update.
* solib-svr4.c (svr4_fetch_objfile_link_map): Update.
(enable_break): Update.
* solib-frv.c (frv_fdpic_find_global_pointer): Update.
(frv_fdpic_find_canonical_descriptor): Update.
(frv_fetch_objfile_link_map): Update.
* progspace.c (program_space::free_all_objfiles): Update.
(program_space::solibs): New method.
* progspace.h (struct program_space) <solibs>: New method.
* solist.h (master_so_list): Don't declare.
(ALL_SO_LIBS): Remove.
* solib.h (so_list_head): Remove.
(update_solib_list): Update comment.
* solib.c (master_so_list): Remove.
(solib_used, update_solib_list, solib_add)
(info_sharedlibrary_command, clear_solib)
(reload_shared_libraries_1, remove_user_added_objfile): Update.
|
|
This changes get_objfile_arch to be a new inline method,
objfile::arch.
To my surprise, this function came up while profiling DWARF psymbol
reading. Making this change improved performance from 1.986 seconds
to 1.869 seconds. Both measurements were done by taking the mean of
10 runs on a fixed copy of the gdb executable.
gdb/ChangeLog
2020-04-18 Tom Tromey <tom@tromey.com>
* xcoffread.c (enter_line_range, scan_xcoff_symtab): Update.
* value.c (value_fn_field): Update.
* valops.c (find_function_in_inferior)
(value_allocate_space_in_inferior): Update.
* tui/tui-winsource.c (tui_update_source_windows_with_line):
Update.
* tui/tui-source.c (tui_source_window::set_contents): Update.
* symtab.c (lookup_global_or_static_symbol)
(find_function_start_sal_1, skip_prologue_sal)
(print_msymbol_info, find_gnu_ifunc, symbol_arch): Update.
* symmisc.c (dump_msymbols, dump_symtab_1)
(maintenance_print_one_line_table): Update.
* symfile.c (init_entry_point_info, section_is_mapped)
(list_overlays_command, simple_read_overlay_table)
(simple_overlay_update_1): Update.
* stap-probe.c (handle_stap_probe): Update.
* stabsread.c (dbx_init_float_type, define_symbol)
(read_one_struct_field, read_enum_type, read_range_type): Update.
* source.c (info_line_command): Update.
* python/python.c (gdbpy_source_objfile_script)
(gdbpy_execute_objfile_script): Update.
* python/py-type.c (save_objfile_types): Update.
* python/py-objfile.c (py_free_objfile): Update.
* python/py-inferior.c (python_new_objfile): Update.
* psymtab.c (psym_find_pc_sect_compunit_symtab, dump_psymtab)
(dump_psymtab_addrmap_1, maintenance_info_psymtabs)
(maintenance_check_psymtabs): Update.
* printcmd.c (info_address_command): Update.
* objfiles.h (struct objfile) <arch>: New method, from
get_objfile_arch.
(get_objfile_arch): Don't declare.
* objfiles.c (get_objfile_arch): Remove.
(filter_overlapping_sections): Update.
* minsyms.c (msymbol_is_function): Update.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines)
(output_nondebug_symbol): Update.
* mdebugread.c (parse_symbol, basic_type, parse_partial_symbols)
(mdebug_expand_psymtab): Update.
* machoread.c (macho_add_oso_symfile): Update.
* linux-tdep.c (linux_infcall_mmap, linux_infcall_munmap):
Update.
* linux-fork.c (checkpoint_command): Update.
* linespec.c (convert_linespec_to_sals): Update.
* jit.c (finalize_symtab): Update.
* infrun.c (insert_exception_resume_from_probe): Update.
* ia64-tdep.c (ia64_find_unwind_table): Update.
* hppa-tdep.c (internalize_unwinds): Update.
* gdbtypes.c (get_type_arch, init_float_type, objfile_type):
Update.
* gcore.c (call_target_sbrk): Update.
* elfread.c (record_minimal_symbol, elf_symtab_read)
(elf_rel_plt_read, elf_gnu_ifunc_record_cache)
(elf_gnu_ifunc_resolve_by_got): Update.
* dwarf2/read.c (create_addrmap_from_index)
(create_addrmap_from_aranges, dw2_find_pc_sect_compunit_symtab)
(read_debug_names_from_section)
(process_psymtab_comp_unit_reader, add_partial_symbol)
(add_partial_subprogram, process_full_comp_unit)
(read_file_scope, read_func_scope, read_lexical_block_scope)
(read_call_site_scope, dwarf2_ranges_read)
(dwarf2_record_block_ranges, dwarf2_add_field)
(mark_common_block_symbol_computed, read_tag_pointer_type)
(read_tag_string_type, dwarf2_init_float_type)
(dwarf2_init_complex_target_type, read_base_type)
(partial_die_info::read, partial_die_info::read)
(read_attribute_value, dwarf_decode_lines_1, new_symbol)
(dwarf2_fetch_die_loc_sect_off): Update.
* dwarf2/loc.c (dwarf2_find_location_expression)
(class dwarf_evaluate_loc_desc, rw_pieced_value)
(dwarf2_evaluate_loc_desc_full, dwarf2_locexpr_baton_eval)
(dwarf2_loc_desc_get_symbol_read_needs)
(locexpr_describe_location_piece, locexpr_describe_location_1)
(loclist_describe_location): Update.
* dwarf2/index-write.c (write_debug_names): Update.
* dwarf2/frame.c (dwarf2_build_frame_info): Update.
* dtrace-probe.c (dtrace_process_dof): Update.
* dbxread.c (read_dbx_symtab, dbx_end_psymtab)
(process_one_symbol): Update.
* ctfread.c (ctf_init_float_type, read_base_type): Update.
* coffread.c (coff_symtab_read, enter_linenos, decode_base_type)
(coff_read_enum_type): Update.
* cli/cli-cmds.c (edit_command, list_command): Update.
* buildsym.c (buildsym_compunit::finish_block_internal): Update.
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint, get_sal_arch): Update.
* block.c (block_gdbarch): Update.
* annotate.c (annotate_source_line): Update.
|
|
This moves event-loop.[ch] to gdbsupport/ and updates the uses in gdb.
gdb/ChangeLog
2020-04-13 Tom Tromey <tom@tromey.com>
* run-on-main-thread.c: Update include.
* unittests/main-thread-selftests.c: Update include.
* tui/tui-win.c: Update include.
* tui/tui-io.c: Update include.
* tui/tui-interp.c: Update include.
* tui/tui-hooks.c: Update include.
* top.h: Update include.
* top.c: Update include.
* ser-base.c: Update include.
* remote.c: Update include.
* remote-notif.c: Update include.
* remote-fileio.c: Update include.
* record-full.c: Update include.
* record-btrace.c: Update include.
* python/python.c: Update include.
* posix-hdep.c: Update include.
* mingw-hdep.c: Update include.
* mi/mi-main.c: Update include.
* mi/mi-interp.c: Update include.
* main.c: Update include.
* linux-nat.c: Update include.
* interps.c: Update include.
* infrun.c: Update include.
* inf-loop.c: Update include.
* event-top.c: Update include.
* event-loop.c: Move to ../gdbsupport/.
* event-loop.h: Move to ../gdbsupport/.
* async-event.h: Update include.
* Makefile.in (COMMON_SFILES, HFILES_NO_SRCDIR): Update.
gdbsupport/ChangeLog
2020-04-13 Tom Tromey <tom@tromey.com>
* event-loop.h: Move from ../gdb/.
* event-loop.cc: Move from ../gdb/.
|
|
This changes a spot in mi-main.c to use common_val_print rather than
val_print.
gdb/ChangeLog
2020-03-13 Tom Tromey <tom@tromey.com>
* mi/mi-main.c (output_register): Use common_val_print.
|
|
Replace with range-based loops.
gdb/ChangeLog:
* mi/mi-main.c (run_one_inferior): Change return type to void, replace
`void *` parameter with proper parameters.
(mi_cmd_exec_run): Use range-based loop to iterate over inferiors.
(print_one_inferior): Change return type to void, replace `void *`
parameter with proper parameters.
(mi_cmd_list_thread_groups): Use range-based loop to iterate over
inferiors.
(get_other_inferior): Remove.
(mi_cmd_remove_inferior): Use range-based loop to iterate over
inferiors.
|
|
Replace it with a range-based for. I've updated the comment in
mi_interp::init, which was a bit stale.
gdb/ChangeLog:
* mi/mi-interp.c (report_initial_inferior): Remove.
(mi_interp::init): Use range-based for to iterate over inferiors.
|
|
I'd like to enable the -Wmissing-declarations warning. However, it
warns for every _initialize function, for example:
CXX dcache.o
/home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’:
/home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations]
_initialize_dcache (void)
^~~~~~~~~~~~~~~~~~
The only practical way forward I found is to add back the declarations,
which were removed by this commit:
commit 481695ed5f6e0a8a9c9c50bfac1cdd2b3151e6c9
Author: John Baldwin <jhb@FreeBSD.org>
Date: Sat Sep 9 11:02:37 2017 -0700
Remove unnecessary function prototypes.
I don't think it's a big problem to have the declarations for these
functions, but if anybody has a better solution for this, I'll be happy
to use it.
gdb/ChangeLog:
* aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Add declaration.
* aarch64-fbsd-tdep.c (_initialize_aarch64_fbsd_tdep): Add declaration.
* aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Add declaration.
* aarch64-linux-tdep.c (_initialize_aarch64_linux_tdep): Add declaration.
* aarch64-newlib-tdep.c (_initialize_aarch64_newlib_tdep): Add declaration.
* aarch64-tdep.c (_initialize_aarch64_tdep): Add declaration.
* ada-exp.y (_initialize_ada_exp): Add declaration.
* ada-lang.c (_initialize_ada_language): Add declaration.
* ada-tasks.c (_initialize_tasks): Add declaration.
* agent.c (_initialize_agent): Add declaration.
* aix-thread.c (_initialize_aix_thread): Add declaration.
* alpha-bsd-nat.c (_initialize_alphabsd_nat): Add declaration.
* alpha-linux-nat.c (_initialize_alpha_linux_nat): Add declaration.
* alpha-linux-tdep.c (_initialize_alpha_linux_tdep): Add declaration.
* alpha-nbsd-tdep.c (_initialize_alphanbsd_tdep): Add declaration.
* alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Add declaration.
* alpha-tdep.c (_initialize_alpha_tdep): Add declaration.
* amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): Add declaration.
* amd64-dicos-tdep.c (_initialize_amd64_dicos_tdep): Add declaration.
* amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Add declaration.
* amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Add declaration.
* amd64-linux-nat.c (_initialize_amd64_linux_nat): Add declaration.
* amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Add declaration.
* amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Add declaration.
* amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Add declaration.
* amd64-obsd-nat.c (_initialize_amd64obsd_nat): Add declaration.
* amd64-obsd-tdep.c (_initialize_amd64obsd_tdep): Add declaration.
* amd64-sol2-tdep.c (_initialize_amd64_sol2_tdep): Add declaration.
* amd64-tdep.c (_initialize_amd64_tdep): Add declaration.
* amd64-windows-nat.c (_initialize_amd64_windows_nat): Add declaration.
* amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Add declaration.
* annotate.c (_initialize_annotate): Add declaration.
* arc-newlib-tdep.c (_initialize_arc_newlib_tdep): Add declaration.
* arc-tdep.c (_initialize_arc_tdep): Add declaration.
* arch-utils.c (_initialize_gdbarch_utils): Add declaration.
* arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Add declaration.
* arm-fbsd-tdep.c (_initialize_arm_fbsd_tdep): Add declaration.
* arm-linux-nat.c (_initialize_arm_linux_nat): Add declaration.
* arm-linux-tdep.c (_initialize_arm_linux_tdep): Add declaration.
* arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Add declaration.
* arm-nbsd-tdep.c (_initialize_arm_netbsd_tdep): Add declaration.
* arm-obsd-tdep.c (_initialize_armobsd_tdep): Add declaration.
* arm-pikeos-tdep.c (_initialize_arm_pikeos_tdep): Add declaration.
* arm-symbian-tdep.c (_initialize_arm_symbian_tdep): Add declaration.
* arm-tdep.c (_initialize_arm_tdep): Add declaration.
* arm-wince-tdep.c (_initialize_arm_wince_tdep): Add declaration.
* auto-load.c (_initialize_auto_load): Add declaration.
* auxv.c (_initialize_auxv): Add declaration.
* avr-tdep.c (_initialize_avr_tdep): Add declaration.
* ax-gdb.c (_initialize_ax_gdb): Add declaration.
* bfin-linux-tdep.c (_initialize_bfin_linux_tdep): Add declaration.
* bfin-tdep.c (_initialize_bfin_tdep): Add declaration.
* break-catch-sig.c (_initialize_break_catch_sig): Add declaration.
* break-catch-syscall.c (_initialize_break_catch_syscall): Add declaration.
* break-catch-throw.c (_initialize_break_catch_throw): Add declaration.
* breakpoint.c (_initialize_breakpoint): Add declaration.
* bsd-uthread.c (_initialize_bsd_uthread): Add declaration.
* btrace.c (_initialize_btrace): Add declaration.
* charset.c (_initialize_charset): Add declaration.
* cli/cli-cmds.c (_initialize_cli_cmds): Add declaration.
* cli/cli-dump.c (_initialize_cli_dump): Add declaration.
* cli/cli-interp.c (_initialize_cli_interp): Add declaration.
* cli/cli-logging.c (_initialize_cli_logging): Add declaration.
* cli/cli-script.c (_initialize_cli_script): Add declaration.
* cli/cli-style.c (_initialize_cli_style): Add declaration.
* coff-pe-read.c (_initialize_coff_pe_read): Add declaration.
* coffread.c (_initialize_coffread): Add declaration.
* compile/compile-cplus-types.c (_initialize_compile_cplus_types): Add declaration.
* compile/compile.c (_initialize_compile): Add declaration.
* complaints.c (_initialize_complaints): Add declaration.
* completer.c (_initialize_completer): Add declaration.
* copying.c (_initialize_copying): Add declaration.
* corefile.c (_initialize_core): Add declaration.
* corelow.c (_initialize_corelow): Add declaration.
* cp-abi.c (_initialize_cp_abi): Add declaration.
* cp-namespace.c (_initialize_cp_namespace): Add declaration.
* cp-support.c (_initialize_cp_support): Add declaration.
* cp-valprint.c (_initialize_cp_valprint): Add declaration.
* cris-linux-tdep.c (_initialize_cris_linux_tdep): Add declaration.
* cris-tdep.c (_initialize_cris_tdep): Add declaration.
* csky-linux-tdep.c (_initialize_csky_linux_tdep): Add declaration.
* csky-tdep.c (_initialize_csky_tdep): Add declaration.
* ctfread.c (_initialize_ctfread): Add declaration.
* d-lang.c (_initialize_d_language): Add declaration.
* darwin-nat-info.c (_initialize_darwin_info_commands): Add declaration.
* darwin-nat.c (_initialize_darwin_nat): Add declaration.
* dbxread.c (_initialize_dbxread): Add declaration.
* dcache.c (_initialize_dcache): Add declaration.
* disasm-selftests.c (_initialize_disasm_selftests): Add declaration.
* disasm.c (_initialize_disasm): Add declaration.
* dtrace-probe.c (_initialize_dtrace_probe): Add declaration.
* dummy-frame.c (_initialize_dummy_frame): Add declaration.
* dwarf-index-cache.c (_initialize_index_cache): Add declaration.
* dwarf-index-write.c (_initialize_dwarf_index_write): Add declaration.
* dwarf2-frame-tailcall.c (_initialize_tailcall_frame): Add declaration.
* dwarf2-frame.c (_initialize_dwarf2_frame): Add declaration.
* dwarf2expr.c (_initialize_dwarf2expr): Add declaration.
* dwarf2loc.c (_initialize_dwarf2loc): Add declaration.
* dwarf2read.c (_initialize_dwarf2_read): Add declaration.
* elfread.c (_initialize_elfread): Add declaration.
* exec.c (_initialize_exec): Add declaration.
* extension.c (_initialize_extension): Add declaration.
* f-lang.c (_initialize_f_language): Add declaration.
* f-valprint.c (_initialize_f_valprint): Add declaration.
* fbsd-nat.c (_initialize_fbsd_nat): Add declaration.
* fbsd-tdep.c (_initialize_fbsd_tdep): Add declaration.
* filesystem.c (_initialize_filesystem): Add declaration.
* findcmd.c (_initialize_mem_search): Add declaration.
* findvar.c (_initialize_findvar): Add declaration.
* fork-child.c (_initialize_fork_child): Add declaration.
* frame-base.c (_initialize_frame_base): Add declaration.
* frame-unwind.c (_initialize_frame_unwind): Add declaration.
* frame.c (_initialize_frame): Add declaration.
* frv-linux-tdep.c (_initialize_frv_linux_tdep): Add declaration.
* frv-tdep.c (_initialize_frv_tdep): Add declaration.
* ft32-tdep.c (_initialize_ft32_tdep): Add declaration.
* gcore.c (_initialize_gcore): Add declaration.
* gdb-demangle.c (_initialize_gdb_demangle): Add declaration.
* gdb_bfd.c (_initialize_gdb_bfd): Add declaration.
* gdbarch-selftests.c (_initialize_gdbarch_selftests): Add declaration.
* gdbarch.c (_initialize_gdbarch): Add declaration.
* gdbtypes.c (_initialize_gdbtypes): Add declaration.
* gnu-nat.c (_initialize_gnu_nat): Add declaration.
* gnu-v2-abi.c (_initialize_gnu_v2_abi): Add declaration.
* gnu-v3-abi.c (_initialize_gnu_v3_abi): Add declaration.
* go-lang.c (_initialize_go_language): Add declaration.
* go32-nat.c (_initialize_go32_nat): Add declaration.
* guile/guile.c (_initialize_guile): Add declaration.
* h8300-tdep.c (_initialize_h8300_tdep): Add declaration.
* hppa-linux-nat.c (_initialize_hppa_linux_nat): Add declaration.
* hppa-linux-tdep.c (_initialize_hppa_linux_tdep): Add declaration.
* hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Add declaration.
* hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Add declaration.
* hppa-obsd-nat.c (_initialize_hppaobsd_nat): Add declaration.
* hppa-obsd-tdep.c (_initialize_hppabsd_tdep): Add declaration.
* hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
* i386-bsd-nat.c (_initialize_i386bsd_nat): Add declaration.
* i386-cygwin-tdep.c (_initialize_i386_cygwin_tdep): Add declaration.
* i386-darwin-nat.c (_initialize_i386_darwin_nat): Add declaration.
* i386-darwin-tdep.c (_initialize_i386_darwin_tdep): Add declaration.
* i386-dicos-tdep.c (_initialize_i386_dicos_tdep): Add declaration.
* i386-fbsd-nat.c (_initialize_i386fbsd_nat): Add declaration.
* i386-fbsd-tdep.c (_initialize_i386fbsd_tdep): Add declaration.
* i386-gnu-nat.c (_initialize_i386gnu_nat): Add declaration.
* i386-gnu-tdep.c (_initialize_i386gnu_tdep): Add declaration.
* i386-go32-tdep.c (_initialize_i386_go32_tdep): Add declaration.
* i386-linux-nat.c (_initialize_i386_linux_nat): Add declaration.
* i386-linux-tdep.c (_initialize_i386_linux_tdep): Add declaration.
* i386-nbsd-nat.c (_initialize_i386nbsd_nat): Add declaration.
* i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Add declaration.
* i386-nto-tdep.c (_initialize_i386nto_tdep): Add declaration.
* i386-obsd-nat.c (_initialize_i386obsd_nat): Add declaration.
* i386-obsd-tdep.c (_initialize_i386obsd_tdep): Add declaration.
* i386-sol2-nat.c (_initialize_amd64_sol2_nat): Add declaration.
* i386-sol2-tdep.c (_initialize_i386_sol2_tdep): Add declaration.
* i386-tdep.c (_initialize_i386_tdep): Add declaration.
* i386-windows-nat.c (_initialize_i386_windows_nat): Add declaration.
* ia64-libunwind-tdep.c (_initialize_libunwind_frame): Add declaration.
* ia64-linux-nat.c (_initialize_ia64_linux_nat): Add declaration.
* ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Add declaration.
* ia64-tdep.c (_initialize_ia64_tdep): Add declaration.
* ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Add declaration.
* infcall.c (_initialize_infcall): Add declaration.
* infcmd.c (_initialize_infcmd): Add declaration.
* inflow.c (_initialize_inflow): Add declaration.
* infrun.c (_initialize_infrun): Add declaration.
* interps.c (_initialize_interpreter): Add declaration.
* iq2000-tdep.c (_initialize_iq2000_tdep): Add declaration.
* jit.c (_initialize_jit): Add declaration.
* language.c (_initialize_language): Add declaration.
* linux-fork.c (_initialize_linux_fork): Add declaration.
* linux-nat.c (_initialize_linux_nat): Add declaration.
* linux-tdep.c (_initialize_linux_tdep): Add declaration.
* linux-thread-db.c (_initialize_thread_db): Add declaration.
* lm32-tdep.c (_initialize_lm32_tdep): Add declaration.
* m2-lang.c (_initialize_m2_language): Add declaration.
* m32c-tdep.c (_initialize_m32c_tdep): Add declaration.
* m32r-linux-nat.c (_initialize_m32r_linux_nat): Add declaration.
* m32r-linux-tdep.c (_initialize_m32r_linux_tdep): Add declaration.
* m32r-tdep.c (_initialize_m32r_tdep): Add declaration.
* m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration.
* m68k-bsd-nat.c (_initialize_m68kbsd_nat): Add declaration.
* m68k-bsd-tdep.c (_initialize_m68kbsd_tdep): Add declaration.
* m68k-linux-nat.c (_initialize_m68k_linux_nat): Add declaration.
* m68k-linux-tdep.c (_initialize_m68k_linux_tdep): Add declaration.
* m68k-tdep.c (_initialize_m68k_tdep): Add declaration.
* machoread.c (_initialize_machoread): Add declaration.
* macrocmd.c (_initialize_macrocmd): Add declaration.
* macroscope.c (_initialize_macroscope): Add declaration.
* maint-test-options.c (_initialize_maint_test_options): Add declaration.
* maint-test-settings.c (_initialize_maint_test_settings): Add declaration.
* maint.c (_initialize_maint_cmds): Add declaration.
* mdebugread.c (_initialize_mdebugread): Add declaration.
* memattr.c (_initialize_mem): Add declaration.
* mep-tdep.c (_initialize_mep_tdep): Add declaration.
* mi/mi-cmd-env.c (_initialize_mi_cmd_env): Add declaration.
* mi/mi-cmds.c (_initialize_mi_cmds): Add declaration.
* mi/mi-interp.c (_initialize_mi_interp): Add declaration.
* mi/mi-main.c (_initialize_mi_main): Add declaration.
* microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): Add declaration.
* microblaze-tdep.c (_initialize_microblaze_tdep): Add declaration.
* mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Add declaration.
* mips-fbsd-tdep.c (_initialize_mips_fbsd_tdep): Add declaration.
* mips-linux-nat.c (_initialize_mips_linux_nat): Add declaration.
* mips-linux-tdep.c (_initialize_mips_linux_tdep): Add declaration.
* mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Add declaration.
* mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Add declaration.
* mips-sde-tdep.c (_initialize_mips_sde_tdep): Add declaration.
* mips-tdep.c (_initialize_mips_tdep): Add declaration.
* mips64-obsd-nat.c (_initialize_mips64obsd_nat): Add declaration.
* mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Add declaration.
* mipsread.c (_initialize_mipsread): Add declaration.
* mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Add declaration.
* mn10300-tdep.c (_initialize_mn10300_tdep): Add declaration.
* moxie-tdep.c (_initialize_moxie_tdep): Add declaration.
* msp430-tdep.c (_initialize_msp430_tdep): Add declaration.
* nds32-tdep.c (_initialize_nds32_tdep): Add declaration.
* nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Add declaration.
* nios2-tdep.c (_initialize_nios2_tdep): Add declaration.
* nto-procfs.c (_initialize_procfs): Add declaration.
* objc-lang.c (_initialize_objc_language): Add declaration.
* observable.c (_initialize_observer): Add declaration.
* opencl-lang.c (_initialize_opencl_language): Add declaration.
* or1k-linux-tdep.c (_initialize_or1k_linux_tdep): Add declaration.
* or1k-tdep.c (_initialize_or1k_tdep): Add declaration.
* osabi.c (_initialize_gdb_osabi): Add declaration.
* osdata.c (_initialize_osdata): Add declaration.
* p-valprint.c (_initialize_pascal_valprint): Add declaration.
* parse.c (_initialize_parse): Add declaration.
* ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Add declaration.
* ppc-fbsd-tdep.c (_initialize_ppcfbsd_tdep): Add declaration.
* ppc-linux-nat.c (_initialize_ppc_linux_nat): Add declaration.
* ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Add declaration.
* ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Add declaration.
* ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Add declaration.
* ppc-obsd-nat.c (_initialize_ppcobsd_nat): Add declaration.
* ppc-obsd-tdep.c (_initialize_ppcobsd_tdep): Add declaration.
* printcmd.c (_initialize_printcmd): Add declaration.
* probe.c (_initialize_probe): Add declaration.
* proc-api.c (_initialize_proc_api): Add declaration.
* proc-events.c (_initialize_proc_events): Add declaration.
* proc-service.c (_initialize_proc_service): Add declaration.
* procfs.c (_initialize_procfs): Add declaration.
* producer.c (_initialize_producer): Add declaration.
* psymtab.c (_initialize_psymtab): Add declaration.
* python/python.c (_initialize_python): Add declaration.
* ravenscar-thread.c (_initialize_ravenscar): Add declaration.
* record-btrace.c (_initialize_record_btrace): Add declaration.
* record-full.c (_initialize_record_full): Add declaration.
* record.c (_initialize_record): Add declaration.
* regcache-dump.c (_initialize_regcache_dump): Add declaration.
* regcache.c (_initialize_regcache): Add declaration.
* reggroups.c (_initialize_reggroup): Add declaration.
* remote-notif.c (_initialize_notif): Add declaration.
* remote-sim.c (_initialize_remote_sim): Add declaration.
* remote.c (_initialize_remote): Add declaration.
* reverse.c (_initialize_reverse): Add declaration.
* riscv-fbsd-nat.c (_initialize_riscv_fbsd_nat): Add declaration.
* riscv-fbsd-tdep.c (_initialize_riscv_fbsd_tdep): Add declaration.
* riscv-linux-nat.c (_initialize_riscv_linux_nat): Add declaration.
* riscv-linux-tdep.c (_initialize_riscv_linux_tdep): Add declaration.
* riscv-tdep.c (_initialize_riscv_tdep): Add declaration.
* rl78-tdep.c (_initialize_rl78_tdep): Add declaration.
* rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Add declaration.
* rs6000-lynx178-tdep.c (_initialize_rs6000_lynx178_tdep):
Add declaration.
* rs6000-nat.c (_initialize_rs6000_nat): Add declaration.
* rs6000-tdep.c (_initialize_rs6000_tdep): Add declaration.
* run-on-main-thread.c (_initialize_run_on_main_thread): Add declaration.
* rust-exp.y (_initialize_rust_exp): Add declaration.
* rx-tdep.c (_initialize_rx_tdep): Add declaration.
* s12z-tdep.c (_initialize_s12z_tdep): Add declaration.
* s390-linux-nat.c (_initialize_s390_nat): Add declaration.
* s390-linux-tdep.c (_initialize_s390_linux_tdep): Add declaration.
* s390-tdep.c (_initialize_s390_tdep): Add declaration.
* score-tdep.c (_initialize_score_tdep): Add declaration.
* ser-go32.c (_initialize_ser_dos): Add declaration.
* ser-mingw.c (_initialize_ser_windows): Add declaration.
* ser-pipe.c (_initialize_ser_pipe): Add declaration.
* ser-tcp.c (_initialize_ser_tcp): Add declaration.
* ser-uds.c (_initialize_ser_socket): Add declaration.
* ser-unix.c (_initialize_ser_hardwire): Add declaration.
* serial.c (_initialize_serial): Add declaration.
* sh-linux-tdep.c (_initialize_sh_linux_tdep): Add declaration.
* sh-nbsd-nat.c (_initialize_shnbsd_nat): Add declaration.
* sh-nbsd-tdep.c (_initialize_shnbsd_tdep): Add declaration.
* sh-tdep.c (_initialize_sh_tdep): Add declaration.
* skip.c (_initialize_step_skip): Add declaration.
* sol-thread.c (_initialize_sol_thread): Add declaration.
* solib-aix.c (_initialize_solib_aix): Add declaration.
* solib-darwin.c (_initialize_darwin_solib): Add declaration.
* solib-dsbt.c (_initialize_dsbt_solib): Add declaration.
* solib-frv.c (_initialize_frv_solib): Add declaration.
* solib-svr4.c (_initialize_svr4_solib): Add declaration.
* solib-target.c (_initialize_solib_target): Add declaration.
* solib.c (_initialize_solib): Add declaration.
* source-cache.c (_initialize_source_cache): Add declaration.
* source.c (_initialize_source): Add declaration.
* sparc-linux-nat.c (_initialize_sparc_linux_nat): Add declaration.
* sparc-linux-tdep.c (_initialize_sparc_linux_tdep): Add declaration.
* sparc-nat.c (_initialize_sparc_nat): Add declaration.
* sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Add declaration.
* sparc-nbsd-tdep.c (_initialize_sparcnbsd_tdep): Add declaration.
* sparc-obsd-tdep.c (_initialize_sparc32obsd_tdep): Add declaration.
* sparc-sol2-tdep.c (_initialize_sparc_sol2_tdep): Add declaration.
* sparc-tdep.c (_initialize_sparc_tdep): Add declaration.
* sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Add declaration.
* sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Add declaration.
* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Add declaration.
* sparc64-linux-tdep.c (_initialize_sparc64_linux_tdep): Add declaration.
* sparc64-nat.c (_initialize_sparc64_nat): Add declaration.
* sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Add declaration.
* sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Add declaration.
* sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Add declaration.
* sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Add declaration.
* sparc64-sol2-tdep.c (_initialize_sparc64_sol2_tdep): Add declaration.
* sparc64-tdep.c (_initialize_sparc64_adi_tdep): Add declaration.
* stabsread.c (_initialize_stabsread): Add declaration.
* stack.c (_initialize_stack): Add declaration.
* stap-probe.c (_initialize_stap_probe): Add declaration.
* std-regs.c (_initialize_frame_reg): Add declaration.
* symfile-debug.c (_initialize_symfile_debug): Add declaration.
* symfile-mem.c (_initialize_symfile_mem): Add declaration.
* symfile.c (_initialize_symfile): Add declaration.
* symmisc.c (_initialize_symmisc): Add declaration.
* symtab.c (_initialize_symtab): Add declaration.
* target.c (_initialize_target): Add declaration.
* target-connection.c (_initialize_target_connection): Add
declaration.
* target-dcache.c (_initialize_target_dcache): Add declaration.
* target-descriptions.c (_initialize_target_descriptions): Add declaration.
* thread.c (_initialize_thread): Add declaration.
* tic6x-linux-tdep.c (_initialize_tic6x_linux_tdep): Add declaration.
* tic6x-tdep.c (_initialize_tic6x_tdep): Add declaration.
* tilegx-linux-nat.c (_initialize_tile_linux_nat): Add declaration.
* tilegx-linux-tdep.c (_initialize_tilegx_linux_tdep): Add declaration.
* tilegx-tdep.c (_initialize_tilegx_tdep): Add declaration.
* tracectf.c (_initialize_ctf): Add declaration.
* tracefile-tfile.c (_initialize_tracefile_tfile): Add declaration.
* tracefile.c (_initialize_tracefile): Add declaration.
* tracepoint.c (_initialize_tracepoint): Add declaration.
* tui/tui-hooks.c (_initialize_tui_hooks): Add declaration.
* tui/tui-interp.c (_initialize_tui_interp): Add declaration.
* tui/tui-layout.c (_initialize_tui_layout): Add declaration.
* tui/tui-regs.c (_initialize_tui_regs): Add declaration.
* tui/tui-stack.c (_initialize_tui_stack): Add declaration.
* tui/tui-win.c (_initialize_tui_win): Add declaration.
* tui/tui.c (_initialize_tui): Add declaration.
* typeprint.c (_initialize_typeprint): Add declaration.
* ui-style.c (_initialize_ui_style): Add declaration.
* unittests/array-view-selftests.c (_initialize_array_view_selftests): Add declaration.
* unittests/child-path-selftests.c (_initialize_child_path_selftests): Add declaration.
* unittests/cli-utils-selftests.c (_initialize_cli_utils_selftests): Add declaration.
* unittests/common-utils-selftests.c (_initialize_common_utils_selftests): Add declaration.
* unittests/copy_bitwise-selftests.c (_initialize_copy_bitwise_utils_selftests): Add declaration.
* unittests/environ-selftests.c (_initialize_environ_selftests): Add declaration.
* unittests/filtered_iterator-selftests.c
(_initialize_filtered_iterator_selftests): Add declaration.
* unittests/format_pieces-selftests.c (_initialize_format_pieces_selftests): Add declaration.
* unittests/function-view-selftests.c (_initialize_function_view_selftests): Add declaration.
* unittests/help-doc-selftests.c (_initialize_help_doc_selftests): Add declaration.
* unittests/lookup_name_info-selftests.c (_initialize_lookup_name_info_selftests): Add declaration.
* unittests/main-thread-selftests.c
(_initialize_main_thread_selftests): Add declaration.
* unittests/memory-map-selftests.c (_initialize_memory_map_selftests): Add declaration.
* unittests/memrange-selftests.c (_initialize_memrange_selftests): Add declaration.
* unittests/mkdir-recursive-selftests.c (_initialize_mkdir_recursive_selftests): Add declaration.
* unittests/observable-selftests.c (_initialize_observer_selftest): Add declaration.
* unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Add declaration.
* unittests/optional-selftests.c (_initialize_optional_selftests): Add declaration.
* unittests/parse-connection-spec-selftests.c (_initialize_parse_connection_spec_selftests): Add declaration.
* unittests/rsp-low-selftests.c (_initialize_rsp_low_selftests): Add declaration.
* unittests/scoped_fd-selftests.c (_initialize_scoped_fd_selftests): Add declaration.
* unittests/scoped_mmap-selftests.c (_initialize_scoped_mmap_selftests): Add declaration.
* unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Add declaration.
* unittests/string_view-selftests.c (_initialize_string_view_selftests): Add declaration.
* unittests/style-selftests.c (_initialize_style_selftest): Add declaration.
* unittests/tracepoint-selftests.c (_initialize_tracepoint_selftests): Add declaration.
* unittests/tui-selftests.c (_initialize_tui_selftest): Add
declaration.
* unittests/unpack-selftests.c (_initialize_unpack_selftests): Add declaration.
* unittests/utils-selftests.c (_initialize_utils_selftests): Add declaration.
* unittests/vec-utils-selftests.c (_initialize_vec_utils_selftests): Add declaration.
* unittests/xml-utils-selftests.c (_initialize_xml_utils): Add declaration.
* user-regs.c (_initialize_user_regs): Add declaration.
* utils.c (_initialize_utils): Add declaration.
* v850-tdep.c (_initialize_v850_tdep): Add declaration.
* valops.c (_initialize_valops): Add declaration.
* valprint.c (_initialize_valprint): Add declaration.
* value.c (_initialize_values): Add declaration.
* varobj.c (_initialize_varobj): Add declaration.
* vax-bsd-nat.c (_initialize_vaxbsd_nat): Add declaration.
* vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Add declaration.
* vax-tdep.c (_initialize_vax_tdep): Add declaration.
* windows-nat.c (_initialize_windows_nat): Add declaration.
(_initialize_check_for_gdb_ini): Add declaration.
(_initialize_loadable): Add declaration.
* windows-tdep.c (_initialize_windows_tdep): Add declaration.
* x86-bsd-nat.c (_initialize_x86_bsd_nat): Add declaration.
* x86-linux-nat.c (_initialize_x86_linux_nat): Add declaration.
* xcoffread.c (_initialize_xcoffread): Add declaration.
* xml-support.c (_initialize_xml_support): Add declaration.
* xstormy16-tdep.c (_initialize_xstormy16_tdep): Add declaration.
* xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Add declaration.
* xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Add declaration.
* xtensa-tdep.c (_initialize_xtensa_tdep): Add declaration.
Change-Id: I13eec7e0ed2b3c427377a7bdb055cf46da64def9
|
|
This commit adds multi-target support to GDB. What this means is that
with this commit, GDB can now be connected to different targets at the
same time. E.g., you can debug a live native process and a core dump
at the same time, connect to multiple gdbservers, etc.
Actually, the word "target" is overloaded in gdb. We already have a
target stack, with pushes several target_ops instances on top of one
another. We also have "info target" already, which means something
completely different to what this patch does.
So from here on, I'll be using the "target connections" term, to mean
an open process_stratum target, pushed on a target stack. This patch
makes gdb have multiple target stacks, and multiple process_stratum
targets open simultaneously. The user-visible changes / commands will
also use this terminology, but of course it's all open to debate.
User-interface-wise, not that much changes. The main difference is
that each inferior may have its own target connection.
A target connection (e.g., a target extended-remote connection) may
support debugging multiple processes, just as before.
Say you're debugging against gdbserver in extended-remote mode, and
you do "add-inferior" to prepare to spawn a new process, like:
(gdb) target extended-remote :9999
...
(gdb) start
...
(gdb) add-inferior
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) file a.out
...
(gdb) start
...
At this point, you have two inferiors connected to the same gdbserver.
With this commit, GDB will maintain a target stack per inferior,
instead of a global target stack.
To preserve the behavior above, by default, "add-inferior" makes the
new inferior inherit a copy of the target stack of the current
inferior. Same across a fork - the child inherits a copy of the
target stack of the parent. While the target stacks are copied, the
targets themselves are not. Instead, target_ops is made a
refcounted_object, which means that target_ops instances are
refcounted, which each inferior counting for a reference.
What if you want to create an inferior and connect it to some _other_
target? For that, this commit introduces a new "add-inferior
-no-connection" option that makes the new inferior not share the
current inferior's target. So you could do:
(gdb) target extended-remote :9999
Remote debugging using :9999
...
(gdb) add-inferior -no-connection
[New inferior 2]
Added inferior 2
(gdb) inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 <null>
(gdb) tar extended-remote :10000
Remote debugging using :10000
...
(gdb) info inferiors
Num Description Executable
1 process 18401 target:/home/pedro/tmp/main
* 2 process 18450 target:/home/pedro/tmp/main
(gdb)
A following patch will extended "info inferiors" to include a column
indicating which connection an inferior is bound to, along with a
couple other UI tweaks.
Other than that, debugging is the same as before. Users interact with
inferiors and threads as before. The only difference is that
inferiors may be bound to processes running in different machines.
That's pretty much all there is to it in terms of noticeable UI
changes.
On to implementation.
Since we can be connected to different systems at the same time, a
ptid_t is no longer a unique identifier. Instead a thread can be
identified by a pair of ptid_t and 'process_stratum_target *', the
later being the instance of the process_stratum target that owns the
process/thread. Note that process_stratum_target inherits from
target_ops, and all process_stratum targets inherit from
process_stratum_target. In earlier patches, many places in gdb were
converted to refer to threads by thread_info pointer instead of
ptid_t, but there are still places in gdb where we start with a
pid/tid and need to find the corresponding inferior or thread_info
objects. So you'll see in the patch many places adding a
process_stratum_target parameter to functions that used to take only a
ptid_t.
Since each inferior has its own target stack now, we can always find
the process_stratum target for an inferior. That is done via a
inf->process_target() convenience method.
Since each inferior has its own target stack, we need to handle the
"beneath" calls when servicing target calls. The solution I settled
with is just to make sure to switch the current inferior to the
inferior you want before making a target call. Not relying on global
context is just not feasible in current GDB. Fortunately, there
aren't that many places that need to do that, because generally most
code that calls target methods already has the current context
pointing to the right inferior/thread. Note, to emphasize -- there's
no method to "switch to this target stack". Instead, you switch the
current inferior, and that implicitly switches the target stack.
In some spots, we need to iterate over all inferiors so that we reach
all target stacks.
Native targets are still singletons. There's always only a single
instance of such targets.
Remote targets however, we'll have one instance per remote connection.
The exec target is still a singleton. There's only one instance. I
did not see the point of instanciating more than one exec_target
object.
After vfork, we need to make sure to push the exec target on the new
inferior. See exec_on_vfork.
For type safety, functions that need a {target, ptid} pair to identify
a thread, take a process_stratum_target pointer for target parameter
instead of target_ops *. Some shared code in gdb/nat/ also need to
gain a target pointer parameter. This poses an issue, since gdbserver
doesn't have process_stratum_target, only target_ops. To fix this,
this commit renames gdbserver's target_ops to process_stratum_target.
I think this makes sense. There's no concept of target stack in
gdbserver, and gdbserver's target_ops really implements a
process_stratum-like target.
The thread and inferior iterator functions also gain
process_stratum_target parameters. These are used to be able to
iterate over threads and inferiors of a given target. Following usual
conventions, if the target pointer is null, then we iterate over
threads and inferiors of all targets.
I tried converting "add-inferior" to the gdb::option framework, as a
preparatory patch, but that stumbled on the fact that gdb::option does
not support file options yet, for "add-inferior -exec". I have a WIP
patchset that adds that, but it's not a trivial patch, mainly due to
need to integrate readline's filename completion, so I deferred that
to some other time.
In infrun.c/infcmd.c, the main change is that we need to poll events
out of all targets. See do_target_wait. Right after collecting an
event, we switch the current inferior to an inferior bound to the
target that reported the event, so that target methods can be used
while handling the event. This makes most of the code transparent to
multi-targets. See fetch_inferior_event.
infrun.c:stop_all_threads is interesting -- in this function we need
to stop all threads of all targets. What the function does is send an
asynchronous stop request to all threads, and then synchronously waits
for events, with target_wait, rinse repeat, until all it finds are
stopped threads. Now that we have multiple targets, it's not
efficient to synchronously block in target_wait waiting for events out
of one target. Instead, we implement a mini event loop, with
interruptible_select, select'ing on one file descriptor per target.
For this to work, we need to be able to ask the target for a waitable
file descriptor. Such file descriptors already exist, they are the
descriptors registered in the main event loop with add_file_handler,
inside the target_async implementations. This commit adds a new
target_async_wait_fd target method that just returns the file
descriptor in question. See wait_one / stop_all_threads in infrun.c.
The 'threads_executing' global is made a per-target variable. Since
it is only relevant to process_stratum_target targets, this is where
it is put, instead of in target_ops.
You'll notice that remote.c includes some FIXME notes. These refer to
the fact that the global arrays that hold data for the remote packets
supported are still globals. For example, if we connect to two
different servers/stubs, then each might support different remote
protocol features. They might even be different architectures, like
e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a
host/controller scenario as a single program. That isn't going to
work correctly today, because of said globals. I'm leaving fixing
that for another pass, since it does not appear to be trivial, and I'd
rather land the base work first. It's already useful to be able to
debug multiple instances of the same server (e.g., a distributed
cluster, where you have full control over the servers installed), so I
think as is it's already reasonable incremental progress.
Current limitations:
- You can only resume more that one target at the same time if all
targets support asynchronous debugging, and support non-stop mode.
It should be possible to support mixed all-stop + non-stop
backends, but that is left for another time. This means that
currently in order to do multi-target with gdbserver you need to
issue "maint set target-non-stop on". I would like to make that
mode be the default, but we're not there yet. Note that I'm
talking about how the target backend works, only. User-visible
all-stop mode works just fine.
- As explained above, connecting to different remote servers at the
same time is likely to produce bad results if they don't support the
exact set of RSP features.
FreeBSD updates courtesy of John Baldwin.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
John Baldwin <jhb@FreeBSD.org>
* aarch64-linux-nat.c
(aarch64_linux_nat_target::thread_architecture): Adjust.
* ada-tasks.c (print_ada_task_info): Adjust find_thread_ptid call.
(task_command_1): Likewise.
* aix-thread.c (sync_threadlists, aix_thread_target::resume)
(aix_thread_target::wait, aix_thread_target::fetch_registers)
(aix_thread_target::store_registers)
(aix_thread_target::thread_alive): Adjust.
* amd64-fbsd-tdep.c: Include "inferior.h".
(amd64fbsd_get_thread_local_address): Pass down target.
* amd64-linux-nat.c (ps_get_thread_area): Use ps_prochandle
thread's gdbarch instead of target_gdbarch.
* break-catch-sig.c (signal_catchpoint_print_it): Adjust call to
get_last_target_status.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
* breakpoint.c (breakpoints_should_be_inserted_now): Consider all
inferiors.
(update_inserted_breakpoint_locations): Skip if inferiors with no
execution.
(update_global_location_list): When handling moribund locations,
find representative inferior for location's pspace, and use thread
count of its process_stratum target.
* bsd-kvm.c (bsd_kvm_target_open): Pass target down.
* bsd-uthread.c (bsd_uthread_target::wait): Use
as_process_stratum_target and adjust thread_change_ptid and
add_thread calls.
(bsd_uthread_target::update_thread_list): Use
as_process_stratum_target and adjust find_thread_ptid,
thread_change_ptid and add_thread calls.
* btrace.c (maint_btrace_packet_history_cmd): Adjust
find_thread_ptid call.
* corelow.c (add_to_thread_list): Adjust add_thread call.
(core_target_open): Adjust add_thread_silent and thread_count
calls.
(core_target::pid_to_str): Adjust find_inferior_ptid call.
* ctf.c (ctf_target_open): Adjust add_thread_silent call.
* event-top.c (async_disconnect): Pop targets from all inferiors.
* exec.c (add_target_sections): Push exec target on all inferiors
sharing the program space.
(remove_target_sections): Remove the exec target from all
inferiors sharing the program space.
(exec_on_vfork): New.
* exec.h (exec_on_vfork): Declare.
* fbsd-nat.c (fbsd_add_threads): Add fbsd_nat_target parameter.
Pass it down.
(fbsd_nat_target::update_thread_list): Adjust.
(fbsd_nat_target::resume): Adjust.
(fbsd_handle_debug_trap): Add fbsd_nat_target parameter. Pass it
down.
(fbsd_nat_target::wait, fbsd_nat_target::post_attach): Adjust.
* fbsd-tdep.c (fbsd_corefile_thread): Adjust
get_thread_arch_regcache call.
* fork-child.c (gdb_startup_inferior): Pass target down to
startup_inferior and set_executing.
* gdbthread.h (struct process_stratum_target): Forward declare.
(add_thread, add_thread_silent, add_thread_with_info)
(in_thread_list): Add process_stratum_target parameter.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(find_thread_ptid, thread_change_ptid): Add process_stratum_target
parameter.
(all_threads()): Delete overload.
(all_threads, all_non_exited_threads): Add process_stratum_target
parameter.
(all_threads_safe): Use brace initialization.
(thread_count): Add process_stratum_target parameter.
(set_resumed, set_running, set_stop_requested, set_executing)
(threads_are_executing, finish_thread_state): Add
process_stratum_target parameter.
(switch_to_thread): Use is_current_thread.
* i386-fbsd-tdep.c: Include "inferior.h".
(i386fbsd_get_thread_local_address): Pass down target.
* i386-linux-nat.c (i386_linux_nat_target::low_resume): Adjust.
* inf-child.c (inf_child_target::maybe_unpush_target): Remove
have_inferiors check.
* inf-ptrace.c (inf_ptrace_target::create_inferior)
(inf_ptrace_target::attach): Adjust.
* infcall.c (run_inferior_call): Adjust.
* infcmd.c (run_command_1): Pass target to
scoped_finish_thread_state.
(proceed_thread_callback): Skip inferiors with no execution.
(continue_command): Rename 'all_threads' local to avoid hiding
'all_threads' function. Adjust get_last_target_status call.
(prepare_one_step): Adjust set_running call.
(signal_command): Use user_visible_resume_target. Compare thread
pointers instead of inferior_ptid.
(info_program_command): Adjust to pass down target.
(attach_command): Mark target's 'thread_executing' flag.
(stop_current_target_threads_ns): New, factored out from ...
(interrupt_target_1): ... this. Switch inferior before making
target calls.
* inferior-iter.h
(struct all_inferiors_iterator, struct all_inferiors_range)
(struct all_inferiors_safe_range)
(struct all_non_exited_inferiors_range): Filter on
process_stratum_target too. Remove explicit.
* inferior.c (inferior::inferior): Push dummy target on target
stack.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors):
Add process_stratum_target parameter, and pass it down.
(have_live_inferiors): Adjust.
(switch_to_inferior_and_push_target): New.
(add_inferior_command, clone_inferior_command): Handle
"-no-connection" parameter. Use
switch_to_inferior_and_push_target.
(_initialize_inferior): Mention "-no-connection" option in
the help of "add-inferior" and "clone-inferior" commands.
* inferior.h: Include "process-stratum-target.h".
(interrupt_target_1): Use bool.
(struct inferior) <push_target, unpush_target, target_is_pushed,
find_target_beneath, top_target, process_target, target_at,
m_stack>: New.
(discard_all_inferiors): Delete.
(find_inferior_pid, find_inferior_ptid, number_of_live_inferiors)
(all_inferiors, all_non_exited_inferiors): Add
process_stratum_target parameter.
* infrun.c: Include "gdb_select.h" and <unordered_map>.
(target_last_proc_target): New global.
(follow_fork_inferior): Push target on new inferior. Pass target
to add_thread_silent. Call exec_on_vfork. Handle target's
reference count.
(follow_fork): Adjust get_last_target_status call. Also consider
target.
(follow_exec): Push target on new inferior.
(struct execution_control_state) <target>: New field.
(user_visible_resume_target): New.
(do_target_resume): Call target_async.
(resume_1): Set target's threads_executing flag. Consider resume
target.
(commit_resume_all_targets): New.
(proceed): Also consider resume target. Skip threads of inferiors
with no execution. Commit resumtion in all targets.
(start_remote): Pass current inferior to wait_for_inferior.
(infrun_thread_stop_requested): Consider target as well. Pass
thread_info pointer to clear_inline_frame_state instead of ptid.
(infrun_thread_thread_exit): Consider target as well.
(random_pending_event_thread): New inferior parameter. Use it.
(do_target_wait): Rename to ...
(do_target_wait_1): ... this. Add inferior parameter, and pass it
down.
(threads_are_resumed_pending_p, do_target_wait): New.
(prepare_for_detach): Adjust calls.
(wait_for_inferior): New inferior parameter. Handle it. Use
do_target_wait_1 instead of do_target_wait.
(fetch_inferior_event): Adjust. Switch to representative
inferior. Pass target down.
(set_last_target_status): Add process_stratum_target parameter.
Save target in global.
(get_last_target_status): Add process_stratum_target parameter and
handle it.
(nullify_last_target_wait_ptid): Clear 'target_last_proc_target'.
(context_switch): Check inferior_ptid == null_ptid before calling
inferior_thread().
(get_inferior_stop_soon): Pass down target.
(wait_one): Rename to ...
(poll_one_curr_target): ... this.
(struct wait_one_event): New.
(wait_one): New.
(stop_all_threads): Adjust.
(handle_no_resumed, handle_inferior_event): Adjust to consider the
event's target.
(switch_back_to_stepped_thread): Also consider target.
(print_stop_event): Update.
(normal_stop): Update. Also consider the resume target.
* infrun.h (wait_for_inferior): Remove declaration.
(user_visible_resume_target): New declaration.
(get_last_target_status, set_last_target_status): New
process_stratum_target parameter.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter, and use it.
(clear_inline_frame_state (thread_info*)): New.
* inline-frame.c (clear_inline_frame_state(ptid_t)): Add
process_stratum_target parameter.
(clear_inline_frame_state (thread_info*)): Declare.
* linux-fork.c (delete_checkpoint_command): Pass target down to
find_thread_ptid.
(checkpoint_command): Adjust.
* linux-nat.c (linux_nat_target::follow_fork): Switch to thread
instead of just tweaking inferior_ptid.
(linux_nat_switch_fork): Pass target down to thread_change_ptid.
(exit_lwp): Pass target down to find_thread_ptid.
(attach_proc_task_lwp_callback): Pass target down to
add_thread/set_running/set_executing.
(linux_nat_target::attach): Pass target down to
thread_change_ptid.
(get_detach_signal): Pass target down to find_thread_ptid.
Consider last target status's target.
(linux_resume_one_lwp_throw, resume_lwp)
(linux_handle_syscall_trap, linux_handle_extended_wait, wait_lwp)
(stop_wait_callback, save_stop_reason, linux_nat_filter_event)
(linux_nat_wait_1, resume_stopped_resumed_lwps): Pass target down.
(linux_nat_target::async_wait_fd): New.
(linux_nat_stop_lwp, linux_nat_target::thread_address_space): Pass
target down.
* linux-nat.h (linux_nat_target::async_wait_fd): Declare.
* linux-tdep.c (get_thread_arch_regcache): Pass target down.
* linux-thread-db.c (struct thread_db_info::process_target): New
field.
(add_thread_db_info): Save target.
(get_thread_db_info): New process_stratum_target parameter. Also
match target.
(delete_thread_db_info): New process_stratum_target parameter.
Also match target.
(thread_from_lwp): Adjust to pass down target.
(thread_db_notice_clone): Pass down target.
(check_thread_db_callback): Pass down target.
(try_thread_db_load_1): Always push the thread_db target.
(try_thread_db_load, record_thread): Pass target down.
(thread_db_target::detach): Pass target down. Always unpush the
thread_db target.
(thread_db_target::wait, thread_db_target::mourn_inferior): Pass
target down. Always unpush the thread_db target.
(find_new_threads_callback, thread_db_find_new_threads_2)
(thread_db_target::update_thread_list): Pass target down.
(thread_db_target::pid_to_str): Pass current inferior down.
(thread_db_target::get_thread_local_address): Pass target down.
(thread_db_target::resume, maintenance_check_libthread_db): Pass
target down.
* nto-procfs.c (nto_procfs_target::update_thread_list): Adjust.
* procfs.c (procfs_target::procfs_init_inferior): Declare.
(proc_set_current_signal, do_attach, procfs_target::wait): Adjust.
(procfs_init_inferior): Rename to ...
(procfs_target::procfs_init_inferior): ... this and adjust.
(procfs_target::create_inferior, procfs_notice_thread)
(procfs_do_thread_registers): Adjust.
* ppc-fbsd-tdep.c: Include "inferior.h".
(ppcfbsd_get_thread_local_address): Pass down target.
* proc-service.c (ps_xfer_memory): Switch current inferior and
program space as well.
(get_ps_regcache): Pass target down.
* process-stratum-target.c
(process_stratum_target::thread_address_space)
(process_stratum_target::thread_architecture): Pass target down.
* process-stratum-target.h
(process_stratum_target::threads_executing): New field.
(as_process_stratum_target): New.
* ravenscar-thread.c
(ravenscar_thread_target::update_inferior_ptid): Pass target down.
(ravenscar_thread_target::wait, ravenscar_add_thread): Pass target
down.
* record-btrace.c (record_btrace_target::info_record): Adjust.
(record_btrace_target::record_method)
(record_btrace_target::record_is_replaying)
(record_btrace_target::fetch_registers)
(get_thread_current_frame_id, record_btrace_target::resume)
(record_btrace_target::wait, record_btrace_target::stop): Pass
target down.
* record-full.c (record_full_wait_1): Switch to event thread.
Pass target down.
* regcache.c (regcache::regcache)
(get_thread_arch_aspace_regcache, get_thread_arch_regcache): Add
process_stratum_target parameter and handle it.
(current_thread_target): New global.
(get_thread_regcache): Add process_stratum_target parameter and
handle it. Switch inferior before calling target method.
(get_thread_regcache): Pass target down.
(get_thread_regcache_for_ptid): Pass target down.
(registers_changed_ptid): Add process_stratum_target parameter and
handle it.
(registers_changed_thread, registers_changed): Pass target down.
(test_get_thread_arch_aspace_regcache): New.
(current_regcache_test): Define a couple local test_target_ops
instances and use them for testing.
(readwrite_regcache): Pass process_stratum_target parameter.
(cooked_read_test, cooked_write_test): Pass mock_target down.
* regcache.h (get_thread_regcache, get_thread_arch_regcache)
(get_thread_arch_aspace_regcache): Add process_stratum_target
parameter.
(regcache::target): New method.
(regcache::regcache, regcache::get_thread_arch_aspace_regcache)
(regcache::registers_changed_ptid): Add process_stratum_target
parameter.
(regcache::m_target): New field.
(registers_changed_ptid): Add process_stratum_target parameter.
* remote.c (remote_state::supports_vCont_probed): New field.
(remote_target::async_wait_fd): New method.
(remote_unpush_and_throw): Add remote_target parameter.
(get_current_remote_target): Adjust.
(remote_target::remote_add_inferior): Push target.
(remote_target::remote_add_thread)
(remote_target::remote_notice_new_inferior)
(get_remote_thread_info): Pass target down.
(remote_target::update_thread_list): Skip threads of inferiors
bound to other targets. (remote_target::close): Don't discard
inferiors. (remote_target::add_current_inferior_and_thread)
(remote_target::process_initial_stop_replies)
(remote_target::start_remote)
(remote_target::remote_serial_quit_handler): Pass down target.
(remote_target::remote_unpush_target): New remote_target
parameter. Unpush the target from all inferiors.
(remote_target::remote_unpush_and_throw): New remote_target
parameter. Pass it down.
(remote_target::open_1): Check whether the current inferior has
execution instead of checking whether any inferior is live. Pass
target down.
(remote_target::remote_detach_1): Pass down target. Use
remote_unpush_target.
(extended_remote_target::attach): Pass down target.
(remote_target::remote_vcont_probe): Set supports_vCont_probed.
(remote_target::append_resumption): Pass down target.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc, remote_target::resume)
(remote_target::commit_resume): Pass down target.
(remote_target::remote_stop_ns): Check supports_vCont_probed.
(remote_target::interrupt_query)
(remote_target::remove_new_fork_children)
(remote_target::check_pending_events_prevent_wildcard_vcont)
(remote_target::remote_parse_stop_reply)
(remote_target::process_stop_reply): Pass down target.
(first_remote_resumed_thread): New remote_target parameter. Pass
it down.
(remote_target::wait_as): Pass down target.
(unpush_and_perror): New remote_target parameter. Pass it down.
(remote_target::readchar, remote_target::remote_serial_write)
(remote_target::getpkt_or_notif_sane_1)
(remote_target::kill_new_fork_children, remote_target::kill): Pass
down target.
(remote_target::mourn_inferior): Pass down target. Use
remote_unpush_target.
(remote_target::core_of_thread)
(remote_target::remote_btrace_maybe_reopen): Pass down target.
(remote_target::pid_to_exec_file)
(remote_target::thread_handle_to_thread_info): Pass down target.
(remote_target::async_wait_fd): New.
* riscv-fbsd-tdep.c: Include "inferior.h".
(riscv_fbsd_get_thread_local_address): Pass down target.
* sol2-tdep.c (sol2_core_pid_to_str): Pass down target.
* sol-thread.c (sol_thread_target::wait, ps_lgetregs, ps_lsetregs)
(ps_lgetfpregs, ps_lsetfpregs, sol_update_thread_list_callback):
Adjust.
* solib-spu.c (spu_skip_standalone_loader): Pass down target.
* solib-svr4.c (enable_break): Pass down target.
* spu-multiarch.c (parse_spufs_run): Pass down target.
* spu-tdep.c (spu2ppu_sniffer): Pass down target.
* target-delegates.c: Regenerate.
* target.c (g_target_stack): Delete.
(current_top_target): Return the current inferior's top target.
(target_has_execution_1): Refer to the passed-in inferior's top
target.
(target_supports_terminal_ours): Check whether the initial
inferior was already created.
(decref_target): New.
(target_stack::push): Incref/decref the target.
(push_target, push_target, unpush_target): Adjust.
(target_stack::unpush): Defref target.
(target_is_pushed): Return bool. Adjust to refer to the current
inferior's target stack.
(dispose_inferior): Delete, and inline parts ...
(target_preopen): ... here. Only dispose of the current inferior.
(target_detach): Hold strong target reference while detaching.
Pass target down.
(target_thread_name): Add assertion.
(target_resume): Pass down target.
(target_ops::beneath, find_target_at): Adjust to refer to the
current inferior's target stack.
(get_dummy_target): New.
(target_pass_ctrlc): Pass the Ctrl-C to the first inferior that
has a thread running.
(initialize_targets): Rename to ...
(_initialize_target): ... this.
* target.h: Include "gdbsupport/refcounted-object.h".
(struct target_ops): Inherit refcounted_object.
(target_ops::shortname, target_ops::longname): Make const.
(target_ops::async_wait_fd): New method.
(decref_target): Declare.
(struct target_ops_ref_policy): New.
(target_ops_ref): New typedef.
(get_dummy_target): Declare function.
(target_is_pushed): Return bool.
* thread-iter.c (all_matching_threads_iterator::m_inf_matches)
(all_matching_threads_iterator::all_matching_threads_iterator):
Handle filter target.
* thread-iter.h (struct all_matching_threads_iterator, struct
all_matching_threads_range, class all_non_exited_threads_range):
Filter by target too. Remove explicit.
* thread.c (threads_executing): Delete.
(inferior_thread): Pass down current inferior.
(clear_thread_inferior_resources): Pass down thread pointer
instead of ptid_t.
(add_thread_silent, add_thread_with_info, add_thread): Add
process_stratum_target parameter. Use it for thread and inferior
searches.
(is_current_thread): New.
(thread_info::deletable): Use it.
(find_thread_ptid, thread_count, in_thread_list)
(thread_change_ptid, set_resumed, set_running): New
process_stratum_target parameter. Pass it down.
(set_executing): New process_stratum_target parameter. Pass it
down. Adjust reference to 'threads_executing'.
(threads_are_executing): New process_stratum_target parameter.
Adjust reference to 'threads_executing'.
(set_stop_requested, finish_thread_state): New
process_stratum_target parameter. Pass it down.
(switch_to_thread): Also match inferior.
(switch_to_thread): New process_stratum_target parameter. Pass it
down.
(update_threads_executing): Reimplement.
* top.c (quit_force): Pop targets from all inferior.
(gdb_init): Don't call initialize_targets.
* windows-nat.c (windows_nat_target) <get_windows_debug_event>:
Declare.
(windows_add_thread, windows_delete_thread): Adjust.
(get_windows_debug_event): Rename to ...
(windows_nat_target::get_windows_debug_event): ... this. Adjust.
* tracefile-tfile.c (tfile_target_open): Pass down target.
* gdbsupport/common-gdbthread.h (struct process_stratum_target):
Forward declare.
(switch_to_thread): Add process_stratum_target parameter.
* mi/mi-interp.c (mi_on_resume_1): Add process_stratum_target
parameter. Use it.
(mi_on_resume): Pass target down.
* nat/fork-inferior.c (startup_inferior): Add
process_stratum_target parameter. Pass it down.
* nat/fork-inferior.h (startup_inferior): Add
process_stratum_target parameter.
* python/py-threadevent.c (py_get_event_thread): Pass target down.
gdb/gdbserver/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* fork-child.c (post_fork_inferior): Pass target down to
startup_inferior.
* inferiors.c (switch_to_thread): Add process_stratum_target
parameter.
* lynx-low.c (lynx_target_ops): Now a process_stratum_target.
* nto-low.c (nto_target_ops): Now a process_stratum_target.
* linux-low.c (linux_target_ops): Now a process_stratum_target.
* remote-utils.c (prepare_resume_reply): Pass the target to
switch_to_thread.
* target.c (the_target): Now a process_stratum_target.
(done_accessing_memory): Pass the target to switch_to_thread.
(set_target_ops): Ajust to use process_stratum_target.
* target.h (struct target_ops): Rename to ...
(struct process_stratum_target): ... this.
(the_target, set_target_ops): Adjust.
(prepare_to_access_memory): Adjust comment.
* win32-low.c (child_xfer_memory): Adjust to use
process_stratum_target.
(win32_target_ops): Now a process_stratum_target.
|
|
Several places want to switch context to an inferior and its pspace,
while at the same time switch to "no thread selected". This commit
adds a function that does that, and uses it in a few places.
gdb/ChangeLog:
2020-01-10 Pedro Alves <palves@redhat.com>
* inferior.c (switch_to_inferior_no_thread): New function,
factored out from ...
(inferior_command): ... here.
* inferior.h (switch_to_inferior_no_thread): Declare.
* mi/mi-main.c (run_one_inferior): Use
switch_to_inferior_no_thread.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
Also renames the member variable to m_language to make code easier to read
when more functions become member functions.
I was originally hoping to eventually make m_language private (after a few
more patches), but unfortunately then it no longer counts as a POD type,
which means gdbsupport/poison.h won't let us use memset to initialize
this type, which psymtabs rely on to clear padding bytes so that bcache
can work properly.
gdb/ChangeLog:
2019-12-15 Christian Biesinger <cbiesinger@google.com>
* ada-lang.c (ada_add_block_symbols): Update.
(ada_collect_symbol_completion_matches): Update.
* ax-gdb.c (gen_expr): Update.
* block.c (block_lookup_symbol): Update.
(block_lookup_symbol_primary): Update.
(block_find_symbol): Update.
* cp-namespace.c (cp_lookup_symbol_imports_or_template): Update.
* dbxread.c (process_one_symbol): Update.
* dictionary.c (insert_symbol_hashed): Update.
(collate_pending_symbols_by_language): Update.
(mdict_add_symbol): Update.
* dwarf-index-write.c (write_psymbols): Update.
* dwarf2read.c (fixup_go_packaging): Update.
* findvar.c (read_var_value): Update.
* ft32-tdep.c (ft32_skip_prologue): Update.
* go-lang.c (go_symbol_package_name): Update.
* language.h (scoped_switch_to_sym_language_if_auto::
scoped_switch_to_sym_language_if_auto): Update.
* linespec.c (find_method): Update.
(find_label_symbols_in_block): Update.
* mdebugread.c (parse_symbol): Update.
* mi/mi-cmd-stack.c (list_arg_or_local): Update.
* minsyms.c (add_minsym_to_demangled_hash_table): Update.
(minimal_symbol_reader::install): Update.
* moxie-tdep.c (moxie_skip_prologue): Update.
* parse.c (parse_exp_in_context): Update.
* psymtab.c (psymbol_name_matches): Update.
(match_partial_symbol): Update.
(lookup_partial_symbol): Update.
(psymbol_hash): Update.
(psymbol_compare): Update.
* python/py-framefilter.c (extract_sym): Update.
(py_print_single_arg): Update.
* stabsread.c (define_symbol): Update.
* stack.c (print_frame_arg): Update.
(find_frame_funname): Update.
(info_frame_command_core): Update.
* symfile.c (set_initial_language): Update.
* symtab.c (symbol_set_demangled_name): Update.
(symbol_get_demangled_name): Update.
(symbol_set_language): Update.
(symbol_find_demangled_name): Update.
(symbol_set_names): Update.
(general_symbol_info::natural_name): Update.
(general_symbol_info::demangled_name): Update.
(general_symbol_info::search_name): Update.
(symbol_matches_search_name): Update.
(eq_symbol_entry): Update.
(iterate_over_symbols): Update.
(completion_list_add_symbol): Update.
(completion_list_add_msymbol): Update.
(completion_list_add_fields): Update.
* symtab.h (struct general_symbol_info) <language>: New function.
<language>: Rename to...
<m_language>: ...this.
(SYMBOL_LANGUAGE): Remove.
(MSYMBOL_LANGUAGE): Remove.
(struct symbol) <ctor>: Update.
* xstormy16-tdep.c (xstormy16_skip_prologue): Update.
Change-Id: I6464d477457e61639c63ddf8b145e407a35c235a
|
