| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
GDB doesn't handle well the case of an inferior using the JIT interface
to register JIT-ed objfiles and forking. If an inferior registers a
code object using the JIT interface and then forks, the child process
conceptually has the same code object loaded, so GDB should look it up
and learn about it (it currently doesn't).
To achieve this, I think it would make sense to have the
inferior_created observable called when an inferior is created due to a
fork in follow_fork_inferior. The inferior_created observable is
currently called both after starting a new inferior and after attaching
to an inferior, allowing various sub-components to learn about that new
executing inferior. We can see handling a fork child just like
attaching to it, so any work done when attaching should also be done in
the case of a fork child.
Instead of just calling the inferior_created observable, this patch
makes follow_fork_inferior call the whole post_create_inferior function.
This way, the attach and follow-fork code code paths are more alike.
Given that post_create_inferior calls solib_create_inferior_hook,
follow_fork_inferior doesn't need to do it itself, so those calls to
solib_create_inferior_hook are removed.
One question you may have: why not just call post_create_inferior at the
places where solib_create_inferior_hook is currently called, instead of
after target_follow_fork?
- there's something fishy for the second solib_create_inferior_hook
call site: at this point we have switched the current program space
to the child's, but not the current inferior nor the current thread.
So solib_create_inferior_hook (and everything under, including
check_for_thread_db, for example) is called with inferior 1 as the
current inferior and inferior 2's program space as the current
program space. I think that's wrong, because at this point we are
setting up inferior 2, and all that code relies on the current
inferior. We could just add a switch_to_thread call before it to
make inferior 2 the current one, but there are other problems (see
below).
- solib_create_inferior_hook is currently not called on the
`follow_child && detach_fork` path. I think we need to call it,
because we still get a new inferior in that case (even though we
detach the parent). If we only call post_create_inferior where
solib_create_inferior_hook used to be called, then the JIT
subcomponent doesn't get informed about the new inferior, and that
introduces a failure in the new gdb.base/jit-elf-fork.exp test.
- if we try to put the post_create_inferior just after the
switch_to_thread that was originally at line 662, or just before the
call to target_follow_fork, we introduce a subtle failure in
gdb.threads/fork-thread-pending.exp. What happens then is that
libthread_db gets loaded (somewhere under post_create_inferior)
before the linux-nat target learns about the LWPs (which happens in
linux_nat_target::follow_fork). As a result, the ALL_LWPS loop in
try_thread_db_load_1 doesn't see the child LWP, and the thread-db
target doesn't have the chance to fill in thread_info::priv. A bit
later, when the test does "info threads", and
thread_db_target::pid_to_str is called, the thread-db target doesn't
recognize the thread as one of its own, and delegates the request to
the target below. Because the pid_to_str output is not the expected
one, the test fails.
This tells me that we need to call the process target's follow_fork
first, to make the process target create the necessary LWP and thread
structures. Then, we can call post_create_inferior to let the other
components of GDB do their thing.
But then you may ask: check_for_thread_db is already called today,
somewhere under solib_create_inferior_hook, and that is before
target_follow_fork, why don't we see this ordering problem!? Well,
because of the first bullet point: when check_for_thread_db /
thread_db_load are called, the current inferior is (erroneously)
inferior 1, the parent. Because libthread_db is already loaded for
the parent, thread_db_load early returns. check_for_thread_db later
gets called by linux_nat_target::follow_fork. At this point, the
current inferior is the correct one and the child's LWP exists, so
all is well.
Since we now call post_create_inferior after target_follow_fork, which
calls the inferior_created observable, which calls check_for_thread_db,
I don't think linux_nat_target needs to explicitly call
check_for_thread_db itself, so that is removed.
In terms of testing, this patch adds a new gdb.base/jit-elf-fork.exp
test. It makes an inferior register a JIT code object and then fork.
It then verifies that whatever the detach-on-fork and follow-fork-child
parameters are, GDB knows about the JIT code object in all the inferiors
that survive the fork. It verifies that the inferiors can unload that
code object.
There isn't currently a way to get visibility into GDB's idea of the JIT
code objects for each inferior. For the purpose of this test, add the
"maintenance info jit" command. There isn't much we can print about the
JIT code objects except their load address. So the output looks a bit
bare, but it's good enough for the test.
gdb/ChangeLog:
* NEWS: Mention "maint info jit" command.
* infrun.c (follow_fork_inferior): Don't call
solib_create_inferior_hook, call post_create_inferior if a new
inferior was created.
* jit.c (maint_info_jit_cmd): New.
(_initialize_jit): Register new command.
* linux-nat.c (linux_nat_target::follow_fork): Don't call
check_for_thread_db.
* linux-nat.h (check_for_thread_db): Remove declaration.
* linux-thread-db.c (check_thread_signals): Make static.
gdb/doc/ChangeLog:
* gdb.texinfo (Maintenance Commands): Mention "maint info jit".
gdb/testsuite/ChangeLog:
* gdb.base/jit-elf-fork-main.c: New test.
* gdb.base/jit-elf-fork-solib.c: New test.
* gdb.base/jit-elf-fork.exp: New test.
Change-Id: I9a192e55b8a451c00e88100669283fc9ca60de5c
|
|
I wrote this while debugging a problem where the expected unwinder for a
frame wasn't used. It adds messages to show which unwinders are
considered for a frame, why they are not selected (if an exception is
thrown), and finally which unwinder is selected in the end.
To be able to show a meaningful, human-readable name for the unwinders,
add a "name" field to struct frame_unwind, and update all instances to
include a name.
Here's an example of the output:
[frame] frame_unwind_find_by_frame: this_frame=0
[frame] frame_unwind_try_unwinder: trying unwinder "dummy"
[frame] frame_unwind_try_unwinder: no
[frame] frame_unwind_try_unwinder: trying unwinder "dwarf2 tailcall"
[frame] frame_unwind_try_unwinder: no
[frame] frame_unwind_try_unwinder: trying unwinder "inline"
[frame] frame_unwind_try_unwinder: no
[frame] frame_unwind_try_unwinder: trying unwinder "jit"
[frame] frame_unwind_try_unwinder: no
[frame] frame_unwind_try_unwinder: trying unwinder "python"
[frame] frame_unwind_try_unwinder: no
[frame] frame_unwind_try_unwinder: trying unwinder "amd64 epilogue"
[frame] frame_unwind_try_unwinder: no
[frame] frame_unwind_try_unwinder: trying unwinder "i386 epilogue"
[frame] frame_unwind_try_unwinder: no
[frame] frame_unwind_try_unwinder: trying unwinder "dwarf2"
[frame] frame_unwind_try_unwinder: yes
gdb/ChangeLog:
* frame-unwind.h (struct frame_unwind) <name>: New. Update
instances everywhere to include this field.
* frame-unwind.c (frame_unwind_try_unwinder,
frame_unwind_find_by_frame): Add debug messages.
Change-Id: I813f17777422425f0d08b22499817b23922e8ddb
|
|
Add the breakpoint::locations method, which returns a range that can be
used to iterate over a breakpoint's locations. This shortens
for (bp_location *loc = b->loc; loc != nullptr; loc = loc->next)
into
for (bp_location *loc : b->locations ())
Change all the places that I found that could use it.
gdb/ChangeLog:
* breakpoint.h (bp_locations_range): New.
(struct breakpoint) <locations>: New. Use where possible.
Change-Id: I1ba2f7d93d57e544e1f8609124587dcf2e1da037
|
|
Consider a minimal test-case test.c:
...
int main (void) { return 0; }
...
which we can compile into llvm byte code using clang:
...
$ clang -g -S -emit-llvm --target=x86_64-unknown-unknown-elf test.c
...
and then run using lli, which uses the llvm jit:
...
$ lli test.ll
...
If we run this under gdb, we run into an assert:
...
$ gdb -q -batch -ex run --args /usr/bin/lli test.ll
Dwarf Error: Cannot not find DIE at 0x18a936e7 \
[from module libLLVM.so.10-10.0.1-lp152.30.4.x86_64.debug]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
src/gdb/jit.c:1178: internal-error: \
void jit_event_handler(gdbarch*, objfile*): \
Assertion `jiter->jiter_data != nullptr' failed.
...
This is caused by the following.
When running jit_breakpoint_re_set_internal, we first handle
libLLVM.so.10.debug, and set a jit breakpoint.
Next we handle libLLVM.so.10:
...
(gdb) p the_objfile.original_name
$42 = 0x2494170 "libLLVM.so.10"
...
but the minimal symbols we find are from libLLVM.so.10.debug:
...
(gdb) p reg_symbol.objfile.original_name
$43 = 0x38e7c50 "libLLVM.so.10-10.0.1-lp152.30.4.x86_64.debug"
(gdb) p desc_symbol.objfile.original_name
$44 = 0x38e7c50 "libLLVM.so.10-10.0.1-lp152.30.4.x86_64.debug"
...
and consequently, the objf_data is the one from libLLVM.so.10.debug:
...
jiter_objfile_data *objf_data
= get_jiter_objfile_data (reg_symbol.objfile);
...
and so we hit this:
...
if (objf_data->cached_code_address == addr)
continue;
...
and no second jit breakpoint is inserted.
Subsequently, the jit breakpoint is triggered and handled, but when finding
the symbol for the breakpoint address we get:
...
(gdb) p jit_bp_sym.objfile.original_name
$52 = 0x2494170 "libLLVM.so.10"
...
The assert 'jiter->jiter_data != nullptr' triggers because it checks
libLLVM.so.10 while the one with jiter_data setup is libLLVM.so.10.debug.
This fixes the assert:
...
jiter_objfile_data *objf_data
- = get_jiter_objfile_data (reg_symbol.objfile);
- = get_jiter_objfile_data (the_objfile);
...
but consequently we'll have two jit breakpoints, so we also make sure we don't
set a jit breakpoint on separate debug objects like libLLVM.so.10.debug.
Tested on x86_64-linux.
gdb/ChangeLog:
2021-05-21 Tom de Vries <tdevries@suse.de>
PR breakpoint/27889
* jit.c (jit_breakpoint_re_set_internal): Skip separate debug
objects. Call get_jiter_objfile_data with the_objfile.
|
|
Give a name to each observer, this will help produce more meaningful
debug message.
gdbsupport/ChangeLog:
* observable.h (class observable) <struct observer> <observer>:
Add name parameter.
<name>: New field.
<attach>: Add name parameter, update all callers.
Change-Id: Ie0cc4664925215b8d2b09e026011b7803549fba0
|
|
Here's a sample output, with infrun debug enabled as well to show
nesting:
[infrun] fetch_inferior_event: enter
[infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) =
[infrun] print_target_wait_results: 4116727.4116727.0 [process 4116727],
[infrun] print_target_wait_results: status->kind = stopped, signal = GDB_SIGNAL_TRAP
[infrun] handle_inferior_event: status->kind = stopped, signal = GDB_SIGNAL_TRAP
[infrun] start_step_over: enter
[infrun] start_step_over: stealing global queue of threads to step, length = 0
[infrun] operator(): step-over queue now empty
[infrun] start_step_over: exit
[infrun] handle_signal_stop: stop_pc=0x555555555229
[infrun] handle_jit_event: handling bp_jit_event
[jit] jit_read_descriptor: descriptor_addr = 0x5555555580b0
[jit] jit_register_code: symfile_addr = 0x7000000, symfile_size = 15560
[jit] jit_bfd_try_read_symtab: symfile_addr = 0x7000000, symfile_size = 15560
[jit] jit_breakpoint_re_set_internal: breakpoint_addr = 0x555555555229
[infrun] process_event_stop_test: BPSTAT_WHAT_SINGLE
[infrun] process_event_stop_test: no stepping, continue
[infrun] resume_1: step=1, signal=GDB_SIGNAL_0, trap_expected=1, current thread [process 4116727] at 0x555555555229
[infrun] prepare_to_wait: prepare_to_wait
[infrun] fetch_inferior_event: exit
gdb/ChangeLog:
* jit.c (jit_debug_printf): New, use throughout file.
Change-Id: Ic0f5eb3ffc926fb555de4914e7dc1076ada63a97
|
|
gdb/ChangeLog:
* jit.c (jit_debug): Change type to bool.
(_initialize_jit): Adjust.
Change-Id: Ic2b1eec28eafe8ccb2899f38ddc91ba9703cb38e
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
This function allows to create a BFD handle using an accessible memory
range in a target memory. It is currently contained in a JIT module but
this functionality may be of wider usefullness - for example, reading
ELF binaries contained within a core dump.
gdb/ChangeLog:
2020-12-07 Mihails Strasuns <mihails.strasuns@intel.com>
* jit.c (mem_bfd*, bfd_open_from_target_memory): Removed.
* gdb_bfd.h (gdb_bfd_open_from_target_memory): New function.
* gdb_bfd.c (mem_bfd*, gdb_bfd_open_from_target_memory): New functions.
|
|
I want to add another action (clearing displaced stepping state) that
happens when an inferior execs. I think it would be cleaner to have an
observer for this event, rather than have infrun know about each other
sub-component.
Replace the calls to solib_create_inferior_hook and
jit_inferior_created_hook in follow_exec by observers.
gdb/ChangeLog:
* observable.h (inferior_execd): Declare new observable.
* observable.c (inferior_execd): Declare new observable.
* infrun.c (follow_exec): Notify inferior_execd observer.
* jit.c (jit_inferior_created_hook): Make static.
(_initialize_jit): Register inferior_execd observer.
* jit.h (jit_inferior_created_hook): Remove declaration.
* solib.c (_initialize_solib): Register inferior_execd observer.
Change-Id: I000cce00094e23baa67df693d912646b6ae38e44
|
|
Use the inferior parameter now available in jit_inferior_created_hook.
It is passed down to jit_inferior_init, which uses it as much as
possible instead of the current inferior or current program space.
gdb/ChangeLog:
* jit.c (jit_reader_load_command): Pass current inferior.
(jit_inferior_init): Change parameter type to inferior, use it.
(jit_inferior_created): Remove.
(jit_inferior_created_hook): Pass inferior parameter down.
(_initialize_jit): Use jit_inferior_created_hook instead of
jit_inferior_created.
* jit.h (jit_inferior_created_hook): Add inferior parameter.
* infrun.c (follow_exec): Pass inferior to
jit_inferior_created_hook.
Change-Id: If3a2114a933370dd313d5abd623136d273cdb8fa
|
|
I think it would make sense for the inferior_created observable to say
which inferior is being dealt with, rather than relying on it being the
current inferior.
This patch adds an inferior parameter to inferior_created, but does not
change the callbacks to use it.
gdb/ChangeLog:
* aix-thread.c (aix_thread_inferior_created): Add inferior
parameter.
* bsd-uthread.c (bsd_uthread_inferior_created): Likewise.
* dummy-frame.c (cleanup_dummy_frames): Likewise.
* jit.c (jit_inferior_created): Likewise.
* linux-thread-db.c (thread_db_inferior_created): Likewise.
* m68k-linux-tdep.c (m68k_linux_inferior_created): Likewise.
* observable.h (inferior_created): Likewise.
* ravenscar-thread.c (ravenscar_inferior_created): Likewise.
* symfile-mem.c (add_vsyscall_page): Likewise.
* infcmd.c (post_create_inferior): Pass inferior argument.
Change-Id: I2543d19ff055a9df6b269929faea10b27d2adc5e
|
|
I noticed that non of the listeners of the inferior_created observable
used either of the arguments. Remove them. This in turn allows
removing the target parameter of post_create_inferior.
Tested only by rebuilding.
gdb/ChangeLog:
* observable.h <inferior_created>: Remove parameters. Update all
listeners.
* inferior.h (post_create_inferior): Remove target parameter.
Update all callers.
Change-Id: I8944cefdc4447ed5347dc927b75abf1e7a0e27e6
|
|
My understanding is that it's mildly better to use a static const
array, as opposed to a "const char *", for a global string constant,
when possible. This makes sense to me because the pointer requires a
load from an address, whereas the array is just the address.
So, I searched for these in gdb and gdbserver. This patch fixes the
ones I found.
gdb/ChangeLog
2020-09-15 Tom Tromey <tromey@adacore.com>
* unittests/memory-map-selftests.c (valid_mem_map): Now array.
* ui-style.c (ansi_regex_text): Now array.
* rust-exp.y (number_regex_text): Now array.
* linespec.c (linespec_quote_characters): Now array.
* jit.c (jit_break_name, jit_descriptor_name, reader_init_fn_sym):
Now arrays.
gdbserver/ChangeLog
2020-09-15 Tom Tromey <tromey@adacore.com>
* linux-x86-low.cc (xmltarget_i386_linux_no_xml)
(xmltarget_amd64_linux_no_xml): Now arrays.
|
|
To detect whether an objfile is a JITer, we lookup JIT interface
symbols in the objfile. If an objfile does not have these symbols, we
conclude that it is not a JITer. An objfile that does not have the
symbols will never have them. Therefore, once we do a lookup and find
out that the objfile does not have JIT symbols, just set a flag so
that we can skip symbol lookup for that objfile the next time we reset
JIT breakpoints.
gdb/ChangeLog:
2020-07-22 Simon Marchi <simon.marchi@polymtl.ca>
Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* objfiles.h (struct objfile) <skip_jit_symbol_lookup>: New field.
* jit.c (jit_breakpoint_re_set_internal): Use the
`skip_jit_symbol_lookup` field.
|
|
gdb/ChangeLog:
2020-07-22 Simon Marchi <simon.marchi@polymtl.ca>
Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* jit.c (jit_read_descriptor): Define the descriptor address once,
use twice.
(jit_breakpoint_deleted): Move the declaration of the loop variable
`iter` into the loop header.
(jit_breakpoint_re_set_internal): Move the declaration of the local
variable `objf_data` to the first point of definition.
(jit_event_handler): Move the declaration of local variables
`code_entry`, `entry_addr`, and `objf` to their first point of use.
Rename `objf` to `jited`.
|
|
This is no longer needed, remove it.
gdb/ChangeLog:
2020-07-22 Simon Marchi <simon.marchi@polymtl.ca>
* jit.h (struct jiter_objfile_data) <jiter_objfile_data, objfile>:
Remove.
* jit.c (get_jiter_objfile_data): Update.
|
|
GDB's JIT handler stores an objfile (and data associated with it) per
program space to keep track of JIT breakpoint information. This assumes
that there is at most one JITer objfile in the program space. However,
there may be multiple. If so, only the first JITer's hook breakpoints
would be realized and the JIT events from the other JITers would be
missed.
This patch removes that assumption, allowing an arbitrary number of
objfiles within a program space to be JITers.
- The "unique" program_space -> JITer objfile pointer in
jit_program_space_data is removed. In fact, jit_program_space_data
becomes empty, so it is removed entirely.
- jit_breakpoint_deleted is modified, it now has to assume that any
objfile in a program space is a potential JITer. It now iterates on
all objfiles, checking if they are indeed JITers, and if they are,
whether the deleted breakpoint belongs to them.
- jit_breakpoint_re_set_internal also has to assume that any objfile in
a program space is a potential JITer. It creates (or updates) one
jiter_objfile_data structure for each JITer it finds.
- Same for jit_inferior_init. It now iterates all objfiles to read the
initial JIT object list.
gdb/ChangeLog:
2020-07-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
Simon Marchi <simon.marchi@polymtl.ca>
* jit.c (struct jit_program_space_data): Remove.
(jit_program_space_key): Remove.
(jiter_objfile_data::~jiter_objfile_data): Remove program space
stuff.
(get_jit_program_space_data): Remove.
(jit_breakpoint_deleted): Iterate on all of the program space's
objfiles.
(jit_inferior_init): Likewise.
(jit_breakpoint_re_set_internal): Likewise. Also change return
type to void.
(jit_breakpoint_re_set): Pass current_program_space to
jit_breakpoint_re_set_internal.
gdb/testsuite/ChangeLog:
2020-07-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.base/jit-reader-simple.exp: Add a scenario for a binary that
loads two JITers.
|
|
This is in preparation for allowing more than one JITer objfile per
program space. Once we do that, each JITer objfile will have its own
JIT breakpoint (on the __jit_debug_register_code function it provides).
The cached_code_address field is just the runtime / relocated address of
that symbol.
Since they are going to become JITer-objfile-specific and not
program-space-specific, move these fields from jit_program_space_data to
jiter_objfile_data.
gdb/ChangeLog:
2020-07-22 Simon Marchi <simon.marchi@polymtl.ca>
* jit.h (struct jiter_objfile_data) <cached_code_address,
jit_breakpoint>: Move to here from ...
* jit.c (jit_program_space_data): ... here.
(jiter_objfile_data::~jiter_objfile_data): Update.
(jit_breakpoint_deleted): Update.
(jit_breakpoint_re_set_internal): Update.
|
|
Following patch "gdb/jit: split jit_objfile_data in two", there are some
simplifications we can make. The invariants described there mean that
we can assume / assert some things instead of checking them using
conditionals.
If an instance of jiter_objfile_data exists for a given objfile, it's
because the required JIT interface symbols were found. Therefore, in
~jiter_objfile_data, the `register_code` field can't be NULL. It was
previously used to differentiate a jit_objfile_data object used for a
JITer vs a JITed. We can remove that check.
If an instance of jiter_objfile_data exists for a given objfile, it's
because it's the sole JITer objfile in the scope of its program space
(jit_program_space_data::objfile points to it). At the moment,
jit_breakpoint_re_set_internal won't create a second instance of
jiter_objfile_data for a given program space. Therefore, it's not
necessary to check for `ps_data != NULL` in ~jiter_objfile_data: we know
a jit_program_space_data for that program space exists. We also don't
need to check for `ps_data->objfile == this->objfile`, because we know
the objfile is the sole JITer in this program space. Replace these two
conditions with assertions.
A pre-condition for calling the jit_read_descriptor function (which is
respected in the two call sites) is that the objfile `jiter` _is_ a
JITer - it already has a jiter_objfile_data attached to it. When a
jiter_objfile_data exists, its `descriptor` field is necessarily set:
had the descriptor symbol not been found, jit_breakpoint_re_set_internal
would not have created the jiter_objfile_data. Remove the check and
early return in jit_read_descriptor. Access objfile's `jiter_data` field
directly instead of calling `get_jiter_objfile_data` (which creates the
jiter_objfile_data if it doesn't exist yet) and assert that the result
is not nullptr.
Finally, `jit_event_handler` is always passed a JITer objfile. So, add
an assertion to ensure that.
gdb/ChangeLog:
2020-07-22 Simon Marchi <simon.marchi@polymtl.ca>
* jit.c (jiter_objfile_data::~jiter_objfile_data): Remove some
checks.
(jit_read_descriptor): Remove NULL check.
(jit_event_handler): Add an assertion.
|
|
The jit_objfile_data is currently used to hold information about both
objfiles that are the result of JIT compilation (JITed) and objfiles
that can produce JITed objfiles (JITers). I think that this double use
of the type is confusing, and that things would be more obvious if we
had one type for each role.
This patch splits it into:
- jited_objfile_data: for data about an objfile that is the result of a
JIT compilation
- jiter_objfile_data: for data about an objfile which produces JITed
objfiles
There are now two JIT-related fields in an objfile, one for each kind.
With this change, the following invariants hold:
- an objfile has a non-null `jiter_data` field iff it defines the required
symbols of the JIT interface
- an objfile has a non-null `jited_data` field iff it is the product of
JIT compilation (has been produced by some JITer)
gdb/ChangeLog:
2020-07-22 Simon Marchi <simon.marchi@polymtl.ca>
* jit.h (struct jit_objfile_data): Split into...
(struct jiter_objfile_data): ... this ...
(struct jited_objfile_data): ... and this.
* objfiles.h (struct objfile) <jit_data>: Remove.
<jiter_data, jited_data>: New fields.
* jit.c (jit_objfile_data::~jit_objfile_data): Rename to ...
(jiter_objfile_data::~jiter_objfile_data): ... this.
(get_jit_objfile_data): Rename to ...
(get_jiter_objfile_data): ... this.
(add_objfile_entry): Update.
(jit_read_descriptor): Use get_jiter_objfile_data.
(jit_find_objf_with_entry_addr): Use objfile's jited_data field.
(jit_breakpoint_re_set_internal): Use get_jiter_objfile_data.
(jit_inferior_exit_hook): Use objfile's jited_data field.
|
|
Remove the use of objfile_data to associate a jit_objfile_data with an
objfile. Instead, directly link to a jit_objfile_data from an objfile
struct. The goal is to eliminate unnecessary abstraction.
The free_objfile_data function naturally becomes the destructor of
jit_objfile_data. However, free_objfile_data accesses the objfile to
which the data is attached, which the destructor of jit_objfile_data
doesn't have access to. To work around this, add a backlink to the
owning objfile in jit_objfile_data. This is however temporary, it goes
away in a subsequent patch.
gdb/ChangeLog:
2020-07-22 Simon Marchi <simon.marchi@polymtl.ca>
* jit.h: Forward-declare `struct minimal_symbol`.
(struct jit_objfile_data): Migrate to here from jit.c; also add a
constructor, destructor, and an objfile* field.
* jit.c (jit_objfile_data): Remove.
(struct jit_objfile_data): Migrate from here to jit.h.
(jit_objfile_data::~jit_objfile_data): New destructor
implementation with code moved from free_objfile_data.
(free_objfile_data): Delete.
(get_jit_objfile_data): Update to use the jit_data field of objfile.
(jit_find_objf_with_entry_addr): Ditto.
(jit_inferior_exit_hook): Ditto.
(_initialize_jit): Remove the call to
register_objfile_data_with_cleanup.
* objfiles.h (struct objfile) <jit_data>: New field.
|
|
This is a refactoring that adds a new parameter to the `jit_event_handler`
function: the JITer objfile. The goal is to distinguish which JITer
triggered the JIT event, in case there are multiple JITers -- a capability
that is added in a subsequent patch.
gdb/ChangeLog:
2020-07-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* jit.h: Forward-declare `struct objfile`.
(jit_event_handler): Add a second parameter, the JITer objfile.
* jit.c (jit_read_descriptor): Change the signature to take the
JITer objfile as an argument instead of the jit_program_space_data.
(jit_inferior_init): Update the call to jit_read_descriptor.
(jit_event_handler): Use the new JITer objfile argument when calling
jit_read_descriptor.
* breakpoint.c (handle_jit_event): Update the call to
jit_event_handler to pass the JITer objfile.
|
|
This is a minor refactoring that converts the return type of
jit_read_descriptor and jit_breakpoint_re_set_internal functions
from 'int' to 'bool'.
The return value logic of jit_breakpoint_re_set_internal has been
reversed. With this patch it now returns true if the jit breakpoint
has been successfully initialized.
gdb/ChangeLog:
2020-06-22 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* jit.c (jit_read_descriptor): Use bool as the return type.
(jit_breakpoint_re_set_internal): Use bool as the return type.
Invert the return value logic; return true if the jit breakpoint
has been successfully initialized.
(jit_inferior_init): Update the call to
jit_breakpoint_re_set_internal.
|
|
This removes allocate_symbol, allocate_template_symbol, and
initialize_objfile_symbol in favor of changing the default values for
symbol members, and updating the one per-arch caller.
gdb/ChangeLog
2020-05-15 Tom Tromey <tom@tromey.com>
* language.c (language_alloc_type_symbol): Set
SYMBOL_SECTION.
* symtab.c (initialize_objfile_symbol): Remove.
(allocate_symbol): Remove.
(allocate_template_symbol): Remove.
* dwarf2/read.c (fixup_go_packaging): Use "new".
(new_symbol): Use "new".
(read_variable): Don't call initialize_objfile_symbol. Use
"new".
(read_func_scope): Use "new".
* xcoffread.c (process_xcoff_symbol): Don't call
initialize_objfile_symbol.
(SYMBOL_DUP): Remove.
* coffread.c (process_coff_symbol, coff_read_enum_type): Use
"new".
* symtab.h (allocate_symbol, initialize_objfile_symbol)
(allocate_template_symbol): Don't declare.
(struct symbol): Add copy constructor. Change defaults.
* jit.c (finalize_symtab): Use "new".
* ctfread.c (ctf_add_enum_member_cb, new_symbol, ctf_add_var_cb):
Use "new".
* stabsread.c (patch_block_stabs, define_symbol, read_enum_type)
(common_block_end): Use "new".
* mdebugread.c (parse_symbol): Use "new".
(new_symbol): Likewise.
|
|
This changes get_objfile_arch to be a new inline method,
objfile::arch.
To my surprise, this function came up while profiling DWARF psymbol
reading. Making this change improved performance from 1.986 seconds
to 1.869 seconds. Both measurements were done by taking the mean of
10 runs on a fixed copy of the gdb executable.
gdb/ChangeLog
2020-04-18 Tom Tromey <tom@tromey.com>
* xcoffread.c (enter_line_range, scan_xcoff_symtab): Update.
* value.c (value_fn_field): Update.
* valops.c (find_function_in_inferior)
(value_allocate_space_in_inferior): Update.
* tui/tui-winsource.c (tui_update_source_windows_with_line):
Update.
* tui/tui-source.c (tui_source_window::set_contents): Update.
* symtab.c (lookup_global_or_static_symbol)
(find_function_start_sal_1, skip_prologue_sal)
(print_msymbol_info, find_gnu_ifunc, symbol_arch): Update.
* symmisc.c (dump_msymbols, dump_symtab_1)
(maintenance_print_one_line_table): Update.
* symfile.c (init_entry_point_info, section_is_mapped)
(list_overlays_command, simple_read_overlay_table)
(simple_overlay_update_1): Update.
* stap-probe.c (handle_stap_probe): Update.
* stabsread.c (dbx_init_float_type, define_symbol)
(read_one_struct_field, read_enum_type, read_range_type): Update.
* source.c (info_line_command): Update.
* python/python.c (gdbpy_source_objfile_script)
(gdbpy_execute_objfile_script): Update.
* python/py-type.c (save_objfile_types): Update.
* python/py-objfile.c (py_free_objfile): Update.
* python/py-inferior.c (python_new_objfile): Update.
* psymtab.c (psym_find_pc_sect_compunit_symtab, dump_psymtab)
(dump_psymtab_addrmap_1, maintenance_info_psymtabs)
(maintenance_check_psymtabs): Update.
* printcmd.c (info_address_command): Update.
* objfiles.h (struct objfile) <arch>: New method, from
get_objfile_arch.
(get_objfile_arch): Don't declare.
* objfiles.c (get_objfile_arch): Remove.
(filter_overlapping_sections): Update.
* minsyms.c (msymbol_is_function): Update.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines)
(output_nondebug_symbol): Update.
* mdebugread.c (parse_symbol, basic_type, parse_partial_symbols)
(mdebug_expand_psymtab): Update.
* machoread.c (macho_add_oso_symfile): Update.
* linux-tdep.c (linux_infcall_mmap, linux_infcall_munmap):
Update.
* linux-fork.c (checkpoint_command): Update.
* linespec.c (convert_linespec_to_sals): Update.
* jit.c (finalize_symtab): Update.
* infrun.c (insert_exception_resume_from_probe): Update.
* ia64-tdep.c (ia64_find_unwind_table): Update.
* hppa-tdep.c (internalize_unwinds): Update.
* gdbtypes.c (get_type_arch, init_float_type, objfile_type):
Update.
* gcore.c (call_target_sbrk): Update.
* elfread.c (record_minimal_symbol, elf_symtab_read)
(elf_rel_plt_read, elf_gnu_ifunc_record_cache)
(elf_gnu_ifunc_resolve_by_got): Update.
* dwarf2/read.c (create_addrmap_from_index)
(create_addrmap_from_aranges, dw2_find_pc_sect_compunit_symtab)
(read_debug_names_from_section)
(process_psymtab_comp_unit_reader, add_partial_symbol)
(add_partial_subprogram, process_full_comp_unit)
(read_file_scope, read_func_scope, read_lexical_block_scope)
(read_call_site_scope, dwarf2_ranges_read)
(dwarf2_record_block_ranges, dwarf2_add_field)
(mark_common_block_symbol_computed, read_tag_pointer_type)
(read_tag_string_type, dwarf2_init_float_type)
(dwarf2_init_complex_target_type, read_base_type)
(partial_die_info::read, partial_die_info::read)
(read_attribute_value, dwarf_decode_lines_1, new_symbol)
(dwarf2_fetch_die_loc_sect_off): Update.
* dwarf2/loc.c (dwarf2_find_location_expression)
(class dwarf_evaluate_loc_desc, rw_pieced_value)
(dwarf2_evaluate_loc_desc_full, dwarf2_locexpr_baton_eval)
(dwarf2_loc_desc_get_symbol_read_needs)
(locexpr_describe_location_piece, locexpr_describe_location_1)
(loclist_describe_location): Update.
* dwarf2/index-write.c (write_debug_names): Update.
* dwarf2/frame.c (dwarf2_build_frame_info): Update.
* dtrace-probe.c (dtrace_process_dof): Update.
* dbxread.c (read_dbx_symtab, dbx_end_psymtab)
(process_one_symbol): Update.
* ctfread.c (ctf_init_float_type, read_base_type): Update.
* coffread.c (coff_symtab_read, enter_linenos, decode_base_type)
(coff_read_enum_type): Update.
* cli/cli-cmds.c (edit_command, list_command): Update.
* buildsym.c (buildsym_compunit::finish_block_internal): Update.
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint, get_sal_arch): Update.
* block.c (block_gdbarch): Update.
* annotate.c (annotate_source_line): Update.
|
|
This commit brings support for the DWARF line table is_stmt field to
GDB. The is_stmt field is used by the compiler when a single source
line is split into multiple assembler instructions, especially if the
assembler instructions are interleaved with instruction from other
source lines.
The compiler will set the is_stmt flag false from some instructions
from the source lines, these instructions are not a good place to
insert a breakpoint in order to stop at the source line.
Instructions which are marked with the is_stmt flag true are a good
place to insert a breakpoint for that source line.
Currently GDB ignores all instructions for which is_stmt is false.
This is fine in a lot of cases, however, there are some cases where
this means the debug experience is not as good as it could be.
Consider stopping at a random instruction, currently this instruction
will be attributed to the last line table entry before this point for
which is_stmt was true - as these are the only line table entries that
GDB tracks. This can easily be incorrect in code with even a low
level of optimisation.
With is_stmt tracking in place, when stopping at a random instruction
we now attribute the instruction back to the real source line, even
when is_stmt is false for that instruction in the line table.
When inserting breakpoints we still select line table entries for
which is_stmt is true, so the breakpoint placing behaviour should not
change.
When stepping though code (at the line level, not the instruction
level) we will still stop at instruction where is_stmt is true, I
think this is more likely to be the desired behaviour.
Instruction stepping is, of course, unchanged, stepping one
instruction at a time, but we should now report more accurate line
table information with each instruction step.
The original motivation for this work was a patch posted by Bernd
here:
https://sourceware.org/ml/gdb-patches/2019-11/msg00792.html
As part of that thread it was suggested that many issues would be
resolved if GDB supported line table views, this isn't something I've
attempted in this patch, though reading the spec, it seems like this
would be a useful feature to support in GDB in the future. The spec
is here:
http://dwarfstd.org/ShowIssue.php?issue=170427.1
And Bernd gives a brief description of the benefits here:
https://sourceware.org/ml/gdb-patches/2020-01/msg00147.html
With that all said, I think that there is benefit to having proper
is_stmt support regardless of whether we have views support, so I
think we should consider getting this in first, and then building view
support on top of this.
The gdb.cp/step-and-next-inline.exp test is based off a test proposed
by Bernd Edlinger in this message:
https://sourceware.org/ml/gdb-patches/2019-12/msg00842.html
gdb/ChangeLog:
* buildsym-legacy.c (record_line): Pass extra parameter to
record_line.
* buildsym.c (buildsym_compunit::record_line): Take an extra
parameter, reduce duplication in the line table, and record the
is_stmt flag in the line table.
* buildsym.h (buildsym_compunit::record_line): Add extra
parameter.
* disasm.c (do_mixed_source_and_assembly_deprecated): Ignore
non-statement lines.
* dwarf2/read.c (dwarf_record_line_1): Add extra parameter, pass
this to the symtab builder.
(dwarf_finish_line): Pass extra parameter to dwarf_record_line_1.
(lnp_state_machine::record_line): Pass a suitable is_stmt flag
through to dwarf_record_line_1.
* infrun.c (process_event_stop_test): When stepping, don't stop at
a non-statement instruction, and only refresh the step info when
we land in the middle of a line's range. Also add an extra
comment.
* jit.c (jit_symtab_line_mapping_add_impl): Initialise is_stmt
field.
* record-btrace.c (btrace_find_line_range): Only record lines
marked as is-statement.
* stack.c (frame_show_address): Show the frame address if we are
in a non-statement sal.
* symmisc.c (dump_symtab_1): Print the is_stmt flag.
(maintenance_print_one_line_table): Print a header for the is_stmt
column, and include is_stmt information in the output.
* symtab.c (find_pc_sect_line): Find lines marked as statements in
preference to non-statements.
(find_pcs_for_symtab_line): Prefer is-statement entries.
(find_line_common): Likewise.
* symtab.h (struct linetable_entry): Add is_stmt field.
(struct symtab_and_line): Likewise.
* xcoffread.c (arrange_linetable): Initialise is_stmt field when
arranging the line table.
gdb/testsuite/ChangeLog:
* gdb.cp/step-and-next-inline.cc: New file.
* gdb.cp/step-and-next-inline.exp: New file.
* gdb.cp/step-and-next-inline.h: New file.
* gdb.dwarf2/dw2-is-stmt.c: New file.
* gdb.dwarf2/dw2-is-stmt.exp: New file.
* gdb.dwarf2/dw2-is-stmt-2.c: New file.
* gdb.dwarf2/dw2-is-stmt-2.exp: New file.
* gdb.dwarf2/dw2-ranges-base.exp: Update line table pattern.
|
|
I noticed that gnutarget was not "const". Since writing through this
pointer would probably be a bug, I think it ought to be. This patch
makes the change.
gdb/ChangeLog
2020-03-04 Tom Tromey <tom@tromey.com>
* jit.c (bfd_open_from_target_memory): Make "target" const.
* corefile.c (gnutarget): Now const.
* gdbcore.h (gnutarget): Now const.
|
|
I'd like to enable the -Wmissing-declarations warning. However, it
warns for every _initialize function, for example:
CXX dcache.o
/home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’:
/home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations]
_initialize_dcache (void)
^~~~~~~~~~~~~~~~~~
The only practical way forward I found is to add back the declarations,
which were removed by this commit:
commit 481695ed5f6e0a8a9c9c50bfac1cdd2b3151e6c9
Author: John Baldwin <jhb@FreeBSD.org>
Date: Sat Sep 9 11:02:37 2017 -0700
Remove unnecessary function prototypes.
I don't think it's a big problem to have the declarations for these
functions, but if anybody has a better solution for this, I'll be happy
to use it.
gdb/ChangeLog:
* aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Add declaration.
* aarch64-fbsd-tdep.c (_initialize_aarch64_fbsd_tdep): Add declaration.
* aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Add declaration.
* aarch64-linux-tdep.c (_initialize_aarch64_linux_tdep): Add declaration.
* aarch64-newlib-tdep.c (_initialize_aarch64_newlib_tdep): Add declaration.
* aarch64-tdep.c (_initialize_aarch64_tdep): Add declaration.
* ada-exp.y (_initialize_ada_exp): Add declaration.
* ada-lang.c (_initialize_ada_language): Add declaration.
* ada-tasks.c (_initialize_tasks): Add declaration.
* agent.c (_initialize_agent): Add declaration.
* aix-thread.c (_initialize_aix_thread): Add declaration.
* alpha-bsd-nat.c (_initialize_alphabsd_nat): Add declaration.
* alpha-linux-nat.c (_initialize_alpha_linux_nat): Add declaration.
* alpha-linux-tdep.c (_initialize_alpha_linux_tdep): Add declaration.
* alpha-nbsd-tdep.c (_initialize_alphanbsd_tdep): Add declaration.
* alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Add declaration.
* alpha-tdep.c (_initialize_alpha_tdep): Add declaration.
* amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): Add declaration.
* amd64-dicos-tdep.c (_initialize_amd64_dicos_tdep): Add declaration.
* amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Add declaration.
* amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Add declaration.
* amd64-linux-nat.c (_initialize_amd64_linux_nat): Add declaration.
* amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Add declaration.
* amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Add declaration.
* amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Add declaration.
* amd64-obsd-nat.c (_initialize_amd64obsd_nat): Add declaration.
* amd64-obsd-tdep.c (_initialize_amd64obsd_tdep): Add declaration.
* amd64-sol2-tdep.c (_initialize_amd64_sol2_tdep): Add declaration.
* amd64-tdep.c (_initialize_amd64_tdep): Add declaration.
* amd64-windows-nat.c (_initialize_amd64_windows_nat): Add declaration.
* amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Add declaration.
* annotate.c (_initialize_annotate): Add declaration.
* arc-newlib-tdep.c (_initialize_arc_newlib_tdep): Add declaration.
* arc-tdep.c (_initialize_arc_tdep): Add declaration.
* arch-utils.c (_initialize_gdbarch_utils): Add declaration.
* arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Add declaration.
* arm-fbsd-tdep.c (_initialize_arm_fbsd_tdep): Add declaration.
* arm-linux-nat.c (_initialize_arm_linux_nat): Add declaration.
* arm-linux-tdep.c (_initialize_arm_linux_tdep): Add declaration.
* arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Add declaration.
* arm-nbsd-tdep.c (_initialize_arm_netbsd_tdep): Add declaration.
* arm-obsd-tdep.c (_initialize_armobsd_tdep): Add declaration.
* arm-pikeos-tdep.c (_initialize_arm_pikeos_tdep): Add declaration.
* arm-symbian-tdep.c (_initialize_arm_symbian_tdep): Add declaration.
* arm-tdep.c (_initialize_arm_tdep): Add declaration.
* arm-wince-tdep.c (_initialize_arm_wince_tdep): Add declaration.
* auto-load.c (_initialize_auto_load): Add declaration.
* auxv.c (_initialize_auxv): Add declaration.
* avr-tdep.c (_initialize_avr_tdep): Add declaration.
* ax-gdb.c (_initialize_ax_gdb): Add declaration.
* bfin-linux-tdep.c (_initialize_bfin_linux_tdep): Add declaration.
* bfin-tdep.c (_initialize_bfin_tdep): Add declaration.
* break-catch-sig.c (_initialize_break_catch_sig): Add declaration.
* break-catch-syscall.c (_initialize_break_catch_syscall): Add declaration.
* break-catch-throw.c (_initialize_break_catch_throw): Add declaration.
* breakpoint.c (_initialize_breakpoint): Add declaration.
* bsd-uthread.c (_initialize_bsd_uthread): Add declaration.
* btrace.c (_initialize_btrace): Add declaration.
* charset.c (_initialize_charset): Add declaration.
* cli/cli-cmds.c (_initialize_cli_cmds): Add declaration.
* cli/cli-dump.c (_initialize_cli_dump): Add declaration.
* cli/cli-interp.c (_initialize_cli_interp): Add declaration.
* cli/cli-logging.c (_initialize_cli_logging): Add declaration.
* cli/cli-script.c (_initialize_cli_script): Add declaration.
* cli/cli-style.c (_initialize_cli_style): Add declaration.
* coff-pe-read.c (_initialize_coff_pe_read): Add declaration.
* coffread.c (_initialize_coffread): Add declaration.
* compile/compile-cplus-types.c (_initialize_compile_cplus_types): Add declaration.
* compile/compile.c (_initialize_compile): Add declaration.
* complaints.c (_initialize_complaints): Add declaration.
* completer.c (_initialize_completer): Add declaration.
* copying.c (_initialize_copying): Add declaration.
* corefile.c (_initialize_core): Add declaration.
* corelow.c (_initialize_corelow): Add declaration.
* cp-abi.c (_initialize_cp_abi): Add declaration.
* cp-namespace.c (_initialize_cp_namespace): Add declaration.
* cp-support.c (_initialize_cp_support): Add declaration.
* cp-valprint.c (_initialize_cp_valprint): Add declaration.
* cris-linux-tdep.c (_initialize_cris_linux_tdep): Add declaration.
* cris-tdep.c (_initialize_cris_tdep): Add declaration.
* csky-linux-tdep.c (_initialize_csky_linux_tdep): Add declaration.
* csky-tdep.c (_initialize_csky_tdep): Add declaration.
* ctfread.c (_initialize_ctfread): Add declaration.
* d-lang.c (_initialize_d_language): Add declaration.
* darwin-nat-info.c (_initialize_darwin_info_commands): Add declaration.
* darwin-nat.c (_initialize_darwin_nat): Add declaration.
* dbxread.c (_initialize_dbxread): Add declaration.
* dcache.c (_initialize_dcache): Add declaration.
* disasm-selftests.c (_initialize_disasm_selftests): Add declaration.
* disasm.c (_initialize_disasm): Add declaration.
* dtrace-probe.c (_initialize_dtrace_probe): Add declaration.
* dummy-frame.c (_initialize_dummy_frame): Add declaration.
* dwarf-index-cache.c (_initialize_index_cache): Add declaration.
* dwarf-index-write.c (_initialize_dwarf_index_write): Add declaration.
* dwarf2-frame-tailcall.c (_initialize_tailcall_frame): Add declaration.
* dwarf2-frame.c (_initialize_dwarf2_frame): Add declaration.
* dwarf2expr.c (_initialize_dwarf2expr): Add declaration.
* dwarf2loc.c (_initialize_dwarf2loc): Add declaration.
* dwarf2read.c (_initialize_dwarf2_read): Add declaration.
* elfread.c (_initialize_elfread): Add declaration.
* exec.c (_initialize_exec): Add declaration.
* extension.c (_initialize_extension): Add declaration.
* f-lang.c (_initialize_f_language): Add declaration.
* f-valprint.c (_initialize_f_valprint): Add declaration.
* fbsd-nat.c (_initialize_fbsd_nat): Add declaration.
* fbsd-tdep.c (_initialize_fbsd_tdep): Add declaration.
* filesystem.c (_initialize_filesystem): Add declaration.
* findcmd.c (_initialize_mem_search): Add declaration.
* findvar.c (_initialize_findvar): Add declaration.
* fork-child.c (_initialize_fork_child): Add declaration.
* frame-base.c (_initialize_frame_base): Add declaration.
* frame-unwind.c (_initialize_frame_unwind): Add declaration.
* frame.c (_initialize_frame): Add declaration.
* frv-linux-tdep.c (_initialize_frv_linux_tdep): Add declaration.
* frv-tdep.c (_initialize_frv_tdep): Add declaration.
* ft32-tdep.c (_initialize_ft32_tdep): Add declaration.
* gcore.c (_initialize_gcore): Add declaration.
* gdb-demangle.c (_initialize_gdb_demangle): Add declaration.
* gdb_bfd.c (_initialize_gdb_bfd): Add declaration.
* gdbarch-selftests.c (_initialize_gdbarch_selftests): Add declaration.
* gdbarch.c (_initialize_gdbarch): Add declaration.
* gdbtypes.c (_initialize_gdbtypes): Add declaration.
* gnu-nat.c (_initialize_gnu_nat): Add declaration.
* gnu-v2-abi.c (_initialize_gnu_v2_abi): Add declaration.
* gnu-v3-abi.c (_initialize_gnu_v3_abi): Add declaration.
* go-lang.c (_initialize_go_language): Add declaration.
* go32-nat.c (_initialize_go32_nat): Add declaration.
* guile/guile.c (_initialize_guile): Add declaration.
* h8300-tdep.c (_initialize_h8300_tdep): Add declaration.
* hppa-linux-nat.c (_initialize_hppa_linux_nat): Add declaration.
* hppa-linux-tdep.c (_initialize_hppa_linux_tdep): Add declaration.
* hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Add declaration.
* hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Add declaration.
* hppa-obsd-nat.c (_initialize_hppaobsd_nat): Add declaration.
* hppa-obsd-tdep.c (_initialize_hppabsd_tdep): Add declaration.
* hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
* i386-bsd-nat.c (_initialize_i386bsd_nat): Add declaration.
* i386-cygwin-tdep.c (_initialize_i386_cygwin_tdep): Add declaration.
* i386-darwin-nat.c (_initialize_i386_darwin_nat): Add declaration.
* i386-darwin-tdep.c (_initialize_i386_darwin_tdep): Add declaration.
* i386-dicos-tdep.c (_initialize_i386_dicos_tdep): Add declaration.
* i386-fbsd-nat.c (_initialize_i386fbsd_nat): Add declaration.
* i386-fbsd-tdep.c (_initialize_i386fbsd_tdep): Add declaration.
* i386-gnu-nat.c (_initialize_i386gnu_nat): Add declaration.
* i386-gnu-tdep.c (_initialize_i386gnu_tdep): Add declaration.
* i386-go32-tdep.c (_initialize_i386_go32_tdep): Add declaration.
* i386-linux-nat.c (_initialize_i386_linux_nat): Add declaration.
* i386-linux-tdep.c (_initialize_i386_linux_tdep): Add declaration.
* i386-nbsd-nat.c (_initialize_i386nbsd_nat): Add declaration.
* i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Add declaration.
* i386-nto-tdep.c (_initialize_i386nto_tdep): Add declaration.
* i386-obsd-nat.c (_initialize_i386obsd_nat): Add declaration.
* i386-obsd-tdep.c (_initialize_i386obsd_tdep): Add declaration.
* i386-sol2-nat.c (_initialize_amd64_sol2_nat): Add declaration.
* i386-sol2-tdep.c (_initialize_i386_sol2_tdep): Add declaration.
* i386-tdep.c (_initialize_i386_tdep): Add declaration.
* i386-windows-nat.c (_initialize_i386_windows_nat): Add declaration.
* ia64-libunwind-tdep.c (_initialize_libunwind_frame): Add declaration.
* ia64-linux-nat.c (_initialize_ia64_linux_nat): Add declaration.
* ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Add declaration.
* ia64-tdep.c (_initialize_ia64_tdep): Add declaration.
* ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Add declaration.
* infcall.c (_initialize_infcall): Add declaration.
* infcmd.c (_initialize_infcmd): Add declaration.
* inflow.c (_initialize_inflow): Add declaration.
* infrun.c (_initialize_infrun): Add declaration.
* interps.c (_initialize_interpreter): Add declaration.
* iq2000-tdep.c (_initialize_iq2000_tdep): Add declaration.
* jit.c (_initialize_jit): Add declaration.
* language.c (_initialize_language): Add declaration.
* linux-fork.c (_initialize_linux_fork): Add declaration.
* linux-nat.c (_initialize_linux_nat): Add declaration.
* linux-tdep.c (_initialize_linux_tdep): Add declaration.
* linux-thread-db.c (_initialize_thread_db): Add declaration.
* lm32-tdep.c (_initialize_lm32_tdep): Add declaration.
* m2-lang.c (_initialize_m2_language): Add declaration.
* m32c-tdep.c (_initialize_m32c_tdep): Add declaration.
* m32r-linux-nat.c (_initialize_m32r_linux_nat): Add declaration.
* m32r-linux-tdep.c (_initialize_m32r_linux_tdep): Add declaration.
* m32r-tdep.c (_initialize_m32r_tdep): Add declaration.
* m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration.
* m68k-bsd-nat.c (_initialize_m68kbsd_nat): Add declaration.
* m68k-bsd-tdep.c (_initialize_m68kbsd_tdep): Add declaration.
* m68k-linux-nat.c (_initialize_m68k_linux_nat): Add declaration.
* m68k-linux-tdep.c (_initialize_m68k_linux_tdep): Add declaration.
* m68k-tdep.c (_initialize_m68k_tdep): Add declaration.
* machoread.c (_initialize_machoread): Add declaration.
* macrocmd.c (_initialize_macrocmd): Add declaration.
* macroscope.c (_initialize_macroscope): Add declaration.
* maint-test-options.c (_initialize_maint_test_options): Add declaration.
* maint-test-settings.c (_initialize_maint_test_settings): Add declaration.
* maint.c (_initialize_maint_cmds): Add declaration.
* mdebugread.c (_initialize_mdebugread): Add declaration.
* memattr.c (_initialize_mem): Add declaration.
* mep-tdep.c (_initialize_mep_tdep): Add declaration.
* mi/mi-cmd-env.c (_initialize_mi_cmd_env): Add declaration.
* mi/mi-cmds.c (_initialize_mi_cmds): Add declaration.
* mi/mi-interp.c (_initialize_mi_interp): Add declaration.
* mi/mi-main.c (_initialize_mi_main): Add declaration.
* microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): Add declaration.
* microblaze-tdep.c (_initialize_microblaze_tdep): Add declaration.
* mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Add declaration.
* mips-fbsd-tdep.c (_initialize_mips_fbsd_tdep): Add declaration.
* mips-linux-nat.c (_initialize_mips_linux_nat): Add declaration.
* mips-linux-tdep.c (_initialize_mips_linux_tdep): Add declaration.
* mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Add declaration.
* mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Add declaration.
* mips-sde-tdep.c (_initialize_mips_sde_tdep): Add declaration.
* mips-tdep.c (_initialize_mips_tdep): Add declaration.
* mips64-obsd-nat.c (_initialize_mips64obsd_nat): Add declaration.
* mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Add declaration.
* mipsread.c (_initialize_mipsread): Add declaration.
* mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Add declaration.
* mn10300-tdep.c (_initialize_mn10300_tdep): Add declaration.
* moxie-tdep.c (_initialize_moxie_tdep): Add declaration.
* msp430-tdep.c (_initialize_msp430_tdep): Add declaration.
* nds32-tdep.c (_initialize_nds32_tdep): Add declaration.
* nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Add declaration.
* nios2-tdep.c (_initialize_nios2_tdep): Add declaration.
* nto-procfs.c (_initialize_procfs): Add declaration.
* objc-lang.c (_initialize_objc_language): Add declaration.
* observable.c (_initialize_observer): Add declaration.
* opencl-lang.c (_initialize_opencl_language): Add declaration.
* or1k-linux-tdep.c (_initialize_or1k_linux_tdep): Add declaration.
* or1k-tdep.c (_initialize_or1k_tdep): Add declaration.
* osabi.c (_initialize_gdb_osabi): Add declaration.
* osdata.c (_initialize_osdata): Add declaration.
* p-valprint.c (_initialize_pascal_valprint): Add declaration.
* parse.c (_initialize_parse): Add declaration.
* ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Add declaration.
* ppc-fbsd-tdep.c (_initialize_ppcfbsd_tdep): Add declaration.
* ppc-linux-nat.c (_initialize_ppc_linux_nat): Add declaration.
* ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Add declaration.
* ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Add declaration.
* ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Add declaration.
* ppc-obsd-nat.c (_initialize_ppcobsd_nat): Add declaration.
* ppc-obsd-tdep.c (_initialize_ppcobsd_tdep): Add declaration.
* printcmd.c (_initialize_printcmd): Add declaration.
* probe.c (_initialize_probe): Add declaration.
* proc-api.c (_initialize_proc_api): Add declaration.
* proc-events.c (_initialize_proc_events): Add declaration.
* proc-service.c (_initialize_proc_service): Add declaration.
* procfs.c (_initialize_procfs): Add declaration.
* producer.c (_initialize_producer): Add declaration.
* psymtab.c (_initialize_psymtab): Add declaration.
* python/python.c (_initialize_python): Add declaration.
* ravenscar-thread.c (_initialize_ravenscar): Add declaration.
* record-btrace.c (_initialize_record_btrace): Add declaration.
* record-full.c (_initialize_record_full): Add declaration.
* record.c (_initialize_record): Add declaration.
* regcache-dump.c (_initialize_regcache_dump): Add declaration.
* regcache.c (_initialize_regcache): Add declaration.
* reggroups.c (_initialize_reggroup): Add declaration.
* remote-notif.c (_initialize_notif): Add declaration.
* remote-sim.c (_initialize_remote_sim): Add declaration.
* remote.c (_initialize_remote): Add declaration.
* reverse.c (_initialize_reverse): Add declaration.
* riscv-fbsd-nat.c (_initialize_riscv_fbsd_nat): Add declaration.
* riscv-fbsd-tdep.c (_initialize_riscv_fbsd_tdep): Add declaration.
* riscv-linux-nat.c (_initialize_riscv_linux_nat): Add declaration.
* riscv-linux-tdep.c (_initialize_riscv_linux_tdep): Add declaration.
* riscv-tdep.c (_initialize_riscv_tdep): Add declaration.
* rl78-tdep.c (_initialize_rl78_tdep): Add declaration.
* rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Add declaration.
* rs6000-lynx178-tdep.c (_initialize_rs6000_lynx178_tdep):
Add declaration.
* rs6000-nat.c (_initialize_rs6000_nat): Add declaration.
* rs6000-tdep.c (_initialize_rs6000_tdep): Add declaration.
* run-on-main-thread.c (_initialize_run_on_main_thread): Add declaration.
* rust-exp.y (_initialize_rust_exp): Add declaration.
* rx-tdep.c (_initialize_rx_tdep): Add declaration.
* s12z-tdep.c (_initialize_s12z_tdep): Add declaration.
* s390-linux-nat.c (_initialize_s390_nat): Add declaration.
* s390-linux-tdep.c (_initialize_s390_linux_tdep): Add declaration.
* s390-tdep.c (_initialize_s390_tdep): Add declaration.
* score-tdep.c (_initialize_score_tdep): Add declaration.
* ser-go32.c (_initialize_ser_dos): Add declaration.
* ser-mingw.c (_initialize_ser_windows): Add declaration.
* ser-pipe.c (_initialize_ser_pipe): Add declaration.
* ser-tcp.c (_initialize_ser_tcp): Add declaration.
* ser-uds.c (_initialize_ser_socket): Add declaration.
* ser-unix.c (_initialize_ser_hardwire): Add declaration.
* serial.c (_initialize_serial): Add declaration.
* sh-linux-tdep.c (_initialize_sh_linux_tdep): Add declaration.
* sh-nbsd-nat.c (_initialize_shnbsd_nat): Add declaration.
* sh-nbsd-tdep.c (_initialize_shnbsd_tdep): Add declaration.
* sh-tdep.c (_initialize_sh_tdep): Add declaration.
* skip.c (_initialize_step_skip): Add declaration.
* sol-thread.c (_initialize_sol_thread): Add declaration.
* solib-aix.c (_initialize_solib_aix): Add declaration.
* solib-darwin.c (_initialize_darwin_solib): Add declaration.
* solib-dsbt.c (_initialize_dsbt_solib): Add declaration.
* solib-frv.c (_initialize_frv_solib): Add declaration.
* solib-svr4.c (_initialize_svr4_solib): Add declaration.
* solib-target.c (_initialize_solib_target): Add declaration.
* solib.c (_initialize_solib): Add declaration.
* source-cache.c (_initialize_source_cache): Add declaration.
* source.c (_initialize_source): Add declaration.
* sparc-linux-nat.c (_initialize_sparc_linux_nat): Add declaration.
* sparc-linux-tdep.c (_initialize_sparc_linux_tdep): Add declaration.
* sparc-nat.c (_initialize_sparc_nat): Add declaration.
* sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Add declaration.
* sparc-nbsd-tdep.c (_initialize_sparcnbsd_tdep): Add declaration.
* sparc-obsd-tdep.c (_initialize_sparc32obsd_tdep): Add declaration.
* sparc-sol2-tdep.c (_initialize_sparc_sol2_tdep): Add declaration.
* sparc-tdep.c (_initialize_sparc_tdep): Add declaration.
* sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Add declaration.
* sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Add declaration.
* sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Add declaration.
* sparc64-linux-tdep.c (_initialize_sparc64_linux_tdep): Add declaration.
* sparc64-nat.c (_initialize_sparc64_nat): Add declaration.
* sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Add declaration.
* sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Add declaration.
* sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Add declaration.
* sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Add declaration.
* sparc64-sol2-tdep.c (_initialize_sparc64_sol2_tdep): Add declaration.
* sparc64-tdep.c (_initialize_sparc64_adi_tdep): Add declaration.
* stabsread.c (_initialize_stabsread): Add declaration.
* stack.c (_initialize_stack): Add declaration.
* stap-probe.c (_initialize_stap_probe): Add declaration.
* std-regs.c (_initialize_frame_reg): Add declaration.
* symfile-debug.c (_initialize_symfile_debug): Add declaration.
* symfile-mem.c (_initialize_symfile_mem): Add declaration.
* symfile.c (_initialize_symfile): Add declaration.
* symmisc.c (_initialize_symmisc): Add declaration.
* symtab.c (_initialize_symtab): Add declaration.
* target.c (_initialize_target): Add declaration.
* target-connection.c (_initialize_target_connection): Add
declaration.
* target-dcache.c (_initialize_target_dcache): Add declaration.
* target-descriptions.c (_initialize_target_descriptions): Add declaration.
* thread.c (_initialize_thread): Add declaration.
* tic6x-linux-tdep.c (_initialize_tic6x_linux_tdep): Add declaration.
* tic6x-tdep.c (_initialize_tic6x_tdep): Add declaration.
* tilegx-linux-nat.c (_initialize_tile_linux_nat): Add declaration.
* tilegx-linux-tdep.c (_initialize_tilegx_linux_tdep): Add declaration.
* tilegx-tdep.c (_initialize_tilegx_tdep): Add declaration.
* tracectf.c (_initialize_ctf): Add declaration.
* tracefile-tfile.c (_initialize_tracefile_tfile): Add declaration.
* tracefile.c (_initialize_tracefile): Add declaration.
* tracepoint.c (_initialize_tracepoint): Add declaration.
* tui/tui-hooks.c (_initialize_tui_hooks): Add declaration.
* tui/tui-interp.c (_initialize_tui_interp): Add declaration.
* tui/tui-layout.c (_initialize_tui_layout): Add declaration.
* tui/tui-regs.c (_initialize_tui_regs): Add declaration.
* tui/tui-stack.c (_initialize_tui_stack): Add declaration.
* tui/tui-win.c (_initialize_tui_win): Add declaration.
* tui/tui.c (_initialize_tui): Add declaration.
* typeprint.c (_initialize_typeprint): Add declaration.
* ui-style.c (_initialize_ui_style): Add declaration.
* unittests/array-view-selftests.c (_initialize_array_view_selftests): Add declaration.
* unittests/child-path-selftests.c (_initialize_child_path_selftests): Add declaration.
* unittests/cli-utils-selftests.c (_initialize_cli_utils_selftests): Add declaration.
* unittests/common-utils-selftests.c (_initialize_common_utils_selftests): Add declaration.
* unittests/copy_bitwise-selftests.c (_initialize_copy_bitwise_utils_selftests): Add declaration.
* unittests/environ-selftests.c (_initialize_environ_selftests): Add declaration.
* unittests/filtered_iterator-selftests.c
(_initialize_filtered_iterator_selftests): Add declaration.
* unittests/format_pieces-selftests.c (_initialize_format_pieces_selftests): Add declaration.
* unittests/function-view-selftests.c (_initialize_function_view_selftests): Add declaration.
* unittests/help-doc-selftests.c (_initialize_help_doc_selftests): Add declaration.
* unittests/lookup_name_info-selftests.c (_initialize_lookup_name_info_selftests): Add declaration.
* unittests/main-thread-selftests.c
(_initialize_main_thread_selftests): Add declaration.
* unittests/memory-map-selftests.c (_initialize_memory_map_selftests): Add declaration.
* unittests/memrange-selftests.c (_initialize_memrange_selftests): Add declaration.
* unittests/mkdir-recursive-selftests.c (_initialize_mkdir_recursive_selftests): Add declaration.
* unittests/observable-selftests.c (_initialize_observer_selftest): Add declaration.
* unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Add declaration.
* unittests/optional-selftests.c (_initialize_optional_selftests): Add declaration.
* unittests/parse-connection-spec-selftests.c (_initialize_parse_connection_spec_selftests): Add declaration.
* unittests/rsp-low-selftests.c (_initialize_rsp_low_selftests): Add declaration.
* unittests/scoped_fd-selftests.c (_initialize_scoped_fd_selftests): Add declaration.
* unittests/scoped_mmap-selftests.c (_initialize_scoped_mmap_selftests): Add declaration.
* unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Add declaration.
* unittests/string_view-selftests.c (_initialize_string_view_selftests): Add declaration.
* unittests/style-selftests.c (_initialize_style_selftest): Add declaration.
* unittests/tracepoint-selftests.c (_initialize_tracepoint_selftests): Add declaration.
* unittests/tui-selftests.c (_initialize_tui_selftest): Add
declaration.
* unittests/unpack-selftests.c (_initialize_unpack_selftests): Add declaration.
* unittests/utils-selftests.c (_initialize_utils_selftests): Add declaration.
* unittests/vec-utils-selftests.c (_initialize_vec_utils_selftests): Add declaration.
* unittests/xml-utils-selftests.c (_initialize_xml_utils): Add declaration.
* user-regs.c (_initialize_user_regs): Add declaration.
* utils.c (_initialize_utils): Add declaration.
* v850-tdep.c (_initialize_v850_tdep): Add declaration.
* valops.c (_initialize_valops): Add declaration.
* valprint.c (_initialize_valprint): Add declaration.
* value.c (_initialize_values): Add declaration.
* varobj.c (_initialize_varobj): Add declaration.
* vax-bsd-nat.c (_initialize_vaxbsd_nat): Add declaration.
* vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Add declaration.
* vax-tdep.c (_initialize_vax_tdep): Add declaration.
* windows-nat.c (_initialize_windows_nat): Add declaration.
(_initialize_check_for_gdb_ini): Add declaration.
(_initialize_loadable): Add declaration.
* windows-tdep.c (_initialize_windows_tdep): Add declaration.
* x86-bsd-nat.c (_initialize_x86_bsd_nat): Add declaration.
* x86-linux-nat.c (_initialize_x86_linux_nat): Add declaration.
* xcoffread.c (_initialize_xcoffread): Add declaration.
* xml-support.c (_initialize_xml_support): Add declaration.
* xstormy16-tdep.c (_initialize_xstormy16_tdep): Add declaration.
* xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Add declaration.
* xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Add declaration.
* xtensa-tdep.c (_initialize_xtensa_tdep): Add declaration.
Change-Id: I13eec7e0ed2b3c427377a7bdb055cf46da64def9
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This also renames it to make it clearer that this is not a cheap
function (to compute_and_set_names). Also renames name to m_name
to make the implementation of the renamed function more readable.
Most of the places that access sym->m_name directly were also changed
to call linkage_name () instead, to make it clearer which name they
are accessing.
gdb/ChangeLog:
2019-12-26 Christian Biesinger <cbiesinger@google.com>
* ada-lang.c (ada_decode_symbol): Update.
* buildsym.c (add_symbol_to_list): Update.
* coffread.c (process_coff_symbol): Update.
* ctfread.c (ctf_add_enum_member_cb): Update.
(new_symbol): Update.
(ctf_add_var_cb): Update.
* dwarf2read.c (fixup_go_packaging): Update.
(dwarf2_compute_name): Update.
(new_symbol): Update.
* jit.c (finalize_symtab): Update.
* language.c (language_alloc_type_symbol): Update.
* mdebugread.c (new_symbol): Update.
* minsyms.c (minimal_symbol_reader::record_full): Update.
(minimal_symbol_reader::install): Update.
* psymtab.c (print_partial_symbols): Update.
(psymbol_hash): Update.
(psymbol_compare): Update.
(add_psymbol_to_bcache): Update.
(maintenance_check_psymtabs): Update.
* stabsread.c (define_symbol): Update.
* symtab.c (symbol_set_names): Rename to...
(general_symbol_info::compute_and_set_names): ...this.
(general_symbol_info::natural_name): Update.
(general_symbol_info::search_name): Update.
(fixup_section): Update.
* symtab.h (struct general_symbol_info) <name>: Rename to...
<m_name>: ...this.
<compute_and_set_names>: Rename from...
(symbol_set_names): ...this.
(SYMBOL_SET_NAMES): Remove.
(struct symbol) <ctor>: Update.
Change-Id: I8da1f10cab4e0b89f19d5750fa4e6e2ac8d2b24f
|
|
This patch changes the gdb_symtab::blocks manually maintained linked
list to be an std::forward_list, simplifying memory management.
Currently, the list is sorted as blocks are created. With an
std::forward_list, it is easier (and probably a bit more efficient) to
sort them once at the end, so this is what I did.
A note about the comment on the "next" field:
/* gdb_blocks are linked into a tree structure. Next points to the
next node at the same depth as this block and parent to the
parent gdb_block. */
I don't think it's true that "next" points to the next node at the same
depth. All nodes are in a simple singly linked list, so necessarily
some node will point to some other node that isn't at the same depth.
gdb/ChangeLog:
* jit.c (struct gdb_block) <next>: Remove field.
(struct gdb_symtab) <~gdb_symtab>: Remove.
<blocks>: Change type to std::forward_list<gdb_block>.
(compare_block): Remove.
(jit_block_open_impl): Adjust to std::forward_list. Place the new
block at the beginning, don't mind about sorting.
(finalize_symtab): Adjust to std::forward_list, sort the blocks list
before using it.
|
|
Add a constructor to gdb_block, change the name field to be a
gdb::unique_xmalloc_ptr. This is in preparation for using an
std::forward_list<gdb_block> in the next patch.
gdb/ChangeLog:
* jit.c (struct gdb_block): Add constructor, initialize
real_block and next fields.
<name>: Change type to gdb::unique_xmalloc_ptr.
(struct gdb_symtab) <~gdb_symtab>: Free blocks with delete.
(jit_block_open_impl): Allocate gdb_block with new.
(finalize_symtab): Adjust to gdb::unique_xmalloc_ptr.
|
|
Replace the manual linked list with an std::forward_list, simplifying
the memory management. This requires allocating gdb_object with new and
free'ing it with delete.
gdb/ChangeLog:
* jit.c: Include forward_list.
(struct gdb_symtab) <next>: Remove field.
(struct gdb_object) <symtabs>: Change type to
std::forward_list<gdb_symtab>.
(jit_object_open_impl): Allocate gdb_object with new.
(jit_symtab_open_impl): Adjust to std::forward_list.
(finalize_symtab): Don't delete symtab.
(jit_object_close_impl): Adjust to std::forward_list. Free
gdb_object with delete.
|
|
This patch makes the gdb_symtab bit more c++y, in preparation for the
next patch that will use an std::forward_list<gdb_symtab>. It changes
the fields to use automatic memory management, in the form of
std::string and gdb::unique_xmalloc_ptr, and adds a constructor and a
destructor.
gdb/ChangeLog:
* jit.c (struct gdb_symtab): Add constructor, destructor,
initialize fields.
<linetable>: Change type to unique_xmalloc_ptr.
<file_name>: Change type to std::string.
(jit_symtab_open_impl): Allocate gdb_symtab with new.
(jit_symtab_line_mapping_add_impl): Adjust.
(finalize_symtab): Adjust, call delete on stab.
|
|
A double-free happens when using a JIT debug info reader that creates
more than one block. In the loop that frees blocks in finalize_symtab,
at the very end, the gdb_block_iter_tmp variable is set initially, but
not changed as the loop advances. If we have two blocks, the first
iteration frees the first block, the second iteration frees the second
block, but the third iteration tries to free the second block again, as
gdb_block_iter_tmp keeps pointing on the second block.
Fix it by assigning the gdb_block_iter_tmp variable in the loop.
I have improved the jit-reader.exp test to cover this case, by adding a
second "JIT-ed" function and creating a block for it. I have renamed
the existing function to something I find a bit more descriptive. There
are no significant changes to jit-reader.exp itself, only updates
following the renaming. The important changes are in jithost.c
(generate a new function) and in jitreader.c (create a gdb_block for
that function).
This was found because of an ASan report:
$ ./gdb testsuite/outputs/gdb.base/jit-reader/jit-reader -ex "jit-reader-load /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/jit-reader/jitreader.so" -ex r
Reading symbols from testsuite/outputs/gdb.base/jit-reader/jit-reader...
Starting program: /home/simark/build/binutils-gdb/gdb/testsuite/outputs/gdb.base/jit-reader/jit-reader
=================================================================
==1751048==ERROR: AddressSanitizer: heap-use-after-free on address 0x604000042eb8 at pc 0x5650ef8eec88 bp 0x7ffe52767290 sp 0x7ffe52767280
READ of size 8 at 0x604000042eb8 thread T0
#0 0x5650ef8eec87 in finalize_symtab /home/simark/src/binutils-gdb/gdb/jit.c:768
#1 0x5650ef8eef88 in jit_object_close_impl /home/simark/src/binutils-gdb/gdb/jit.c:797
#2 0x7fbbda986278 in read_debug_info /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/jitreader.c:71
#3 0x5650ef8ef56b in jit_reader_try_read_symtab /home/simark/src/binutils-gdb/gdb/jit.c:850
#4 0x5650ef8effe3 in jit_register_code /home/simark/src/binutils-gdb/gdb/jit.c:948
#5 0x5650ef8f2c92 in jit_event_handler(gdbarch*) /home/simark/src/binutils-gdb/gdb/jit.c:1396
#6 0x5650ef0d137e in handle_jit_event /home/simark/src/binutils-gdb/gdb/breakpoint.c:5470
[snip]
0x604000042eb8 is located 40 bytes inside of 48-byte region [0x604000042e90,0x604000042ec0)
freed by thread T0 here:
#0 0x7fbbe57376b0 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:122
#1 0x5650ef8f350b in xfree<gdb_block> /home/simark/src/binutils-gdb/gdb/gdbsupport/common-utils.h:62
#2 0x5650ef8eeca9 in finalize_symtab /home/simark/src/binutils-gdb/gdb/jit.c:769
#3 0x5650ef8eef88 in jit_object_close_impl /home/simark/src/binutils-gdb/gdb/jit.c:797
#4 0x7fbbda986278 in read_debug_info /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/jitreader.c:71
#5 0x5650ef8ef56b in jit_reader_try_read_symtab /home/simark/src/binutils-gdb/gdb/jit.c:850
#6 0x5650ef8effe3 in jit_register_code /home/simark/src/binutils-gdb/gdb/jit.c:948
#7 0x5650ef8f2c92 in jit_event_handler(gdbarch*) /home/simark/src/binutils-gdb/gdb/jit.c:1396
#8 0x5650ef0d137e in handle_jit_event /home/simark/src/binutils-gdb/gdb/breakpoint.c:5470
[snip]
previously allocated by thread T0 here:
#0 0x7fbbe5737cd8 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:153
#1 0x5650eef662f3 in xcalloc /home/simark/src/binutils-gdb/gdb/alloc.c:100
#2 0x5650ef8f34ea in xcnew<gdb_block> /home/simark/src/binutils-gdb/gdb/gdbsupport/poison.h:122
#3 0x5650ef8ed467 in jit_block_open_impl /home/simark/src/binutils-gdb/gdb/jit.c:557
#4 0x7fbbda98620a in read_debug_info /home/simark/src/binutils-gdb/gdb/testsuite/gdb.base/jitreader.c:60
#5 0x5650ef8ef56b in jit_reader_try_read_symtab /home/simark/src/binutils-gdb/gdb/jit.c:850
#6 0x5650ef8effe3 in jit_register_code /home/simark/src/binutils-gdb/gdb/jit.c:948
#7 0x5650ef8f2c92 in jit_event_handler(gdbarch*) /home/simark/src/binutils-gdb/gdb/jit.c:1396
#8 0x5650ef0d137e in handle_jit_event /home/simark/src/binutils-gdb/gdb/breakpoint.c:5470
[snip]
gdb/ChangeLog:
* jit.c (finalize_symtab): Set gdb_block_iter_tmp in loop.
gdb/testsuite/ChangeLog:
* gdb.base/jit-reader.exp (jit_reader_test): Rename
jit_function_00 to jit_function_stack_mangle.
* gdb.base/jithost.c (jit_function_t): Rename to...
(jit_function_stack_mangle_t): ... this.
(jit_function_add_t): New typedef.
(jit_function_00_code): Rename to...
(jit_function_stack_mangle_code): ... this, make static.
(jit_function_add_code): New.
(main): Generate "add" function and call it. Adjust to changes
in jithost_abi.
* gdb.base/jithost.h (struct jithost_abi_bounds): New.
(struct jithost_abi) <begin, end>: Remove fields.
<object, function_stack_mangle, function_add>: New fields.
* gdb.base/jitreader.c (struct reader_state) <code_begin,
code_end>: Remove fields.
<func_stack_mangle>: New field.
(read_debug_info): Adjust to renaming, create block for "add"
function.
(read_sp, unwind_frame, get_frame_id): Adjust to other changes.
|
|
Many places in this file use spaces only for indentation. Fix them to
conform to GNU style.
gdb/ChangeLog:
* jit.c: Fix indentation, replace spaces with tabs where
applicable.
|
|
The idea behind this is that, in the long run, some code will need to
be able to hold onto an objfile after it is unlinked from the program
space. In particular, this is needed for some functionality to be
moved to worker threads -- otherwise the objfile can be deleted while
still in use.
So, this makes ~objfile private, replacing it with an "unlink" method,
making it more obvious which operation is intended at the calling
points.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* symfile.c (syms_from_objfile_1): Use objfile_up.
(syms_from_objfile_1, remove_symbol_file_command): Call unlink
method.
(reread_symbols): Use objfile_up.
* solib.c (update_solib_list, reload_shared_libraries_1): Call
unlink method.
* objfiles.h (struct objfile) <~objfile>: Now private.
<unlink>: New method.
(struct objfile_deleter): New.
(objfile_up): New typedef.
* objfiles.c (objfile::unlink): New method.
(free_objfile_separate_debug, free_all_objfiles)
(objfile_purge_solibs): Use it.
* jit.c (jit_unregister_code): Remove.
(jit_inferior_exit_hook, jit_event_handler): Call unlink on
objfile.
* compile/compile-object-run.c (do_module_cleanup): Call unlink on
objfile.
* compile/compile-object-load.c (compile_object_load): Use
objfile_up.
Change-Id: I934bee70b26b8b24e1735828fb1e60fe8a05714f
|
|
This changes the objfile constructor to be private, changing the
callers to use a factory method. This isn't perhaps strictly needed
for the goal of this series -- changing the container model of
objfiles -- but is a nice symmetry.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* symfile.c (symbol_file_add_with_addrs): Use objfile::make.
* objfiles.h (struct objfile): Make constructor private.
<make>: New static method.
* jit.c (jit_object_close_impl): Update.
Change-Id: I42e07bc80a88cf3322ace94ffe869ae5788bcb29
|
|
I'm currently studying that code and noticed this manual memory
management, which could easily be replaced with a vector, so here it is.
gdb/ChangeLog:
* jit.c (jit_reader_try_read_symtab): Replace xmalloc/xfree with
gdb::byte_vector.
|
|
gdb/ChangeLog:
2019-11-28 Mihails Strasuns <mihails.strasuns@intel.com>
* jit.c (jit_bfd_try_read_symtab): Fix printed function name in the
debug output.
* jit.c (jit_unregister_code): Add debug print to match
`jit_register_code`.
Change-Id: Ie66064f3aaa1c74facfc025c8d87f3a057869779
|
|
Since this is now no longer a POD, also give it a constructor that
initializes all fields. (I have considered overloading operator new
to zero-initialize the memory instead; let me know if you prefer that)
gdb/ChangeLog:
2019-11-12 Christian Biesinger <cbiesinger@google.com>
* ada-exp.y (write_ambiguous_var): Update.
* buildsym.c (add_symbol_to_list): Update.
* dwarf2read.c (read_variable): Update.
(new_symbol): Update.
* jit.c (finalize_symtab): Update.
* language.c (language_alloc_type_symbol): Update.
* symtab.c (fixup_symbol_section): Update.
(initialize_objfile_symbol_1): Move code to...
(initialize_objfile_symbol): ...here. Remove now-unnecessary memset.
(allocate_symbol): Update.
(allocate_template_symbol): Update.
(get_symbol_address): Update.
* symtab.h (struct symbol): Inherit from general_symbol_info instead
of having as a field, and add a constructor.
(SYMBOL_VALUE): Update.
(SYMBOL_VALUE_ADDRESS): Update.
(SET_SYMBOL_VALUE_ADDRESS): Update.
(SYMBOL_VALUE_BYTES): Update.
(SYMBOL_VALUE_COMMON_BLOCK): Update.
(SYMBOL_BLOCK_VALUE): Update.
(SYMBOL_VALUE_CHAIN): Update.
(SYMBOL_LANGUAGE): Update.
(SYMBOL_SECTION): Update.
(SYMBOL_OBJ_SECTION): Update.
(SYMBOL_SET_LANGUAGE): Update.
(SYMBOL_SET_LINKAGE_NAME): Update.
(SYMBOL_SET_NAMES): Update.
(SYMBOL_NATURAL_NAME): Update.
(SYMBOL_LINKAGE_NAME): Update.
(SYMBOL_DEMANGLED_NAME): Update.
(SYMBOL_SEARCH_NAME): Update.
(SYMBOL_MATCHES_SEARCH_NAME): Update.
(struct symbol): Update.
(struct template_symbol): Update.
(struct rust_vtable_symbol): Update.
* xcoffread.c (SYMBOL_DUP): Update.
Change-Id: I05b1628455bcce3efaa101e65ef051708d17eb07
|
|
Fix typos in comments. NFC.
Tested on x86_64-linux.
gdb/ChangeLog:
2019-10-17 Tom de Vries <tdevries@suse.de>
* arm-nbsd-nat.c: Fix typos in comments.
* arm-tdep.c: Same.
* darwin-nat-info.c: Same.
* dwarf2read.c: Same.
* elfread.c: Same.
* event-top.c: Same.
* findvar.c: Same.
* gdbtypes.c: Same.
* hppa-tdep.c: Same.
* i386-tdep.c: Same.
* jit.c: Same.
* main.c: Same.
* mdebugread.c: Same.
* moxie-tdep.c: Same.
* nto-procfs.c: Same.
* osabi.c: Same.
* ppc-linux-tdep.c: Same.
* remote.c: Same.
* riscv-tdep.c: Same.
* s390-tdep.c: Same.
* sh-tdep.c: Same.
* sparc-linux-tdep.c: Same.
* sparc-nat.c: Same.
* stack.c: Same.
* target-descriptions.c: Same.
* top.c: Same.
* varobj.c: Same.
Change-Id: I6047967abd2d51c9000dea15184d19f4e952c3ff
|
|
This large patch removes the unnecessary bfd parameter from various
bfd section macros and functions. The bfd is hardly ever used and if
needed for the bfd_set_section_* or bfd_rename_section functions can
be found via section->owner except for the com, und, abs, and ind
std_section special sections. Those sections shouldn't be modified
anyway.
The patch also removes various bfd_get_section_<field> macros,
replacing their use with bfd_section_<field>, and adds
bfd_set_section_lma. I've also fixed a minor bug in gas where
compressed section renaming was done directly rather than calling
bfd_rename_section. This would have broken bfd_get_section_by_name
and similar functions, but that hardly mattered at such a late stage
in gas processing.
bfd/
* bfd-in.h (bfd_get_section_name, bfd_get_section_vma),
(bfd_get_section_lma, bfd_get_section_alignment),
(bfd_get_section_size, bfd_get_section_flags),
(bfd_get_section_userdata): Delete.
(bfd_section_name, bfd_section_size, bfd_section_vma),
(bfd_section_lma, bfd_section_alignment): Lose bfd parameter.
(bfd_section_flags, bfd_section_userdata): New.
(bfd_is_com_section): Rename parameter.
* section.c (bfd_set_section_userdata, bfd_set_section_vma),
(bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section),
(bfd_set_section_size): Delete bfd parameter, rename section parameter.
(bfd_set_section_lma): New.
* bfd-in2.h: Regenerate.
* mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param,
update callers.
* aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c,
* coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c,
* compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h,
* elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c,
* elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c,
* elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c,
* elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c,
* elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c,
* elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c,
* elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c,
* elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c,
* elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c,
* elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c,
* elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c,
* elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c,
* elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c,
* elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c,
* elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c,
* elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c,
* elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c,
* elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c,
* elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c,
* elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c,
* mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c,
* peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c,
* xcofflink.c: Update throughout for bfd section macro and function
changes.
binutils/
* addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c,
* objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c,
* od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c,
* resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update
throughout for bfd section macro and function changes.
gas/
* as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c,
* read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c,
* config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c,
* config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c,
* config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c,
* config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c,
* config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c,
* config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c,
* config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c,
* config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c,
* config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c,
* config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c,
* config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c,
* config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c,
* config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c,
* config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c,
* config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c,
* config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c,
* config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c,
* config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c,
* config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c,
* config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c,
* config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for
bfd section macro and function changes.
* write.c (compress_debug): Use bfd_rename_section.
gdb/
* aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c,
* coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c,
* dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c,
* exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h,
* hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c,
* i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c,
* maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c,
* mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c,
* objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c,
* ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c,
* rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c,
* s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c,
* solib-spu.c, * solib-svr4.c, * solib-target.c,
* spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c,
* symmisc.c, * symtab.c, * target.c, * windows-nat.c,
* xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c,
* mi/mi-interp.c: Update throughout for bfd section macro and
function changes.
* gcore (gcore_create_callback): Use bfd_set_section_lma.
* spu-tdep.c (spu_overlay_new_objfile): Likewise.
gprof/
* corefile.c, * symtab.c: Update throughout for bfd section
macro and function changes.
ld/
* ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c,
* emultempl/aarch64elf.em, * emultempl/aix.em,
* emultempl/armcoff.em, * emultempl/armelf.em,
* emultempl/cr16elf.em, * emultempl/cskyelf.em,
* emultempl/m68hc1xelf.em, * emultempl/m68kelf.em,
* emultempl/mipself.em, * emultempl/mmix-elfnmmo.em,
* emultempl/mmo.em, * emultempl/msp430.em,
* emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em,
* emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update
throughout for bfd section macro and function changes.
libctf/
* ctf-open-bfd.c: Update throughout for bfd section macro changes.
opcodes/
* arc-ext.c: Update throughout for bfd section macro changes.
sim/
* common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
* erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
* m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
* rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
* rx/trace.c: Update throughout for bfd section macro changes.
|
|
This simplifies memory management. I've also changed some global variables
to std::string accordingly (which store the result of these functions),
but not all because some are used with add_setshow_optional_filename_cmd
which requires a char*.
gdb/ChangeLog:
2019-09-11 Christian Biesinger <cbiesinger@google.com>
* auto-load.c (auto_load_expand_dir_vars): Update.
* defs.h (gdb_datadir): Change to std::string.
(python_libdir): Likewise.
(relocate_gdb_directory): Change return type to std::string.
* guile/guile.c (gdbscm_data_directory): Update.
(initialize_scheme_side): Update.
* jit.c (jit_reader_dir): Change to std::string.
(jit_reader_load_command): Update.
* main.c (gdb_datadir): Change to std::string.
(python_libdir): Likewise.
(set_gdb_data_directory): Update.
(relocate_path): Change to return std::string.
(relocate_gdb_directory): Change to return std::string.
(relocate_gdbinit_path_maybe_in_datadir): Update.
(captured_main_1): Update.
* python/python.c (do_start_initialization): Update.
* top.c (show_gdb_datadir): Update.
* xml-syscall.c (xml_init_syscalls_info): Update.
(init_syscalls_info): Update.
|
|
I need to use 'gdb_dlopen' inside 'gdbsupport/', but it's not yet
supported there. This commit moves 'gdb-dlfcn.[ch]' to 'gdbsupport/',
which makes it available also on gdbserver.
gdb/ChangeLog:
2019-08-23 Sergio Durigan Junior <sergiodj@redhat.com>
* configure.ac: Don't check for 'dlfcn.h' (moved to
gdbsupport/common.m4).
* Makefile.in (COMMON_SFILES): Move 'gdb-dlfcn.c' to
'gdbsupport/'.
(HFILES_NO_SRCDIR): Likewise, for 'gdb-dlfcn.h'.
* compile/compile-c-support.c: Include
'gdbsupport/gdb-dlfcn.h'.
* gdbsupport/common.m4: Check for 'dlfcn.h'.
* gdb-dlfcn.c: Move to...
* gdbsupport/gdb-dlfcn.c: ... here.
* gdb-dlfcn.h: Move to...
* gdbsupport/gdb-dlfcn.h: ... here.
gdb/gdbserver/ChangeLog:
2019-08-23 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): Add 'gdbsupport/gdb-dlfcn.c'.
(OBS): Add 'gdbsupport/gdb-dlfcn.o'.
* config.in: Regenerate.
* configure: Regenerate.
|
|
This changes gdb to use obstack_strdup when appropriate, rather than
the wordier obstack_copy0.
gdb/ChangeLog
2019-08-06 Tom Tromey <tom@tromey.com>
* xcoffread.c (SYMNAME_ALLOC, process_xcoff_symbol): Use
obstack_strdup.
* typeprint.c (typedef_hash_table::find_global_typedef): Use
obstack_strdup.
* symfile.c (allocate_compunit_symtab): Use obstack_strdup.
* stabsread.c (common_block_start): Use obstack_strdup.
* objfiles.c (set_objfile_main_name, objfile): Use
obstack_strdup.
* namespace.c (add_using_directive): Use obstack_strdup.
* mdebugread.c (parse_symbol, parse_type): Use obstack_strdup.
* jit.c (finalize_symtab): Use obstack_strdup.
* dwarf2read.c (fixup_go_packaging, dwarf2_physname)
(guess_partial_die_structure_name, partial_die_info::fixup)
(dwarf2_name): Use obstack_strdup.
* coffread.c (coff_read_struct_type, coff_read_enum_type): Use
obstack_strdup.
* c-exp.y (scan_macro_expansion): Use obstack_strdup.
* buildsym.c (buildsym_compunit::end_symtab_with_blockvector): Use
obstack_strdup.
* ada-lang.c (ada_decode_symbol): Use obstack_strdup.
|
|
This changes jit.c to use the type-safe registry. Only one of the
registry keys in jit.c is converted; the other is trickier and so I've
left it be for now.
gdb/ChangeLog
2019-07-10 Tom Tromey <tromey@adacore.com>
* jit.c (jit_program_space_key): Change type. Move lower.
(get_jit_program_space_data): Update.
(jit_program_space_data_cleanup): Remove.
(jit_breakpoint_deleted, free_objfile_data, _initialize_jit):
Update.
(struct jit_program_space_data): Add initializers.
|
|
This renames the gdb exception types. The old types were only needed
due to the macros in common-exception.h that are now gone.
The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem
needed, so this patch removes it entirely.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL):
Remove.
(gdb_exception_error): Rename from
gdb_exception_RETURN_MASK_ERROR.
(gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT.
(gdb_quit_bad_alloc): Update.
* aarch64-tdep.c: Update.
* ada-lang.c: Update.
* ada-typeprint.c: Update.
* ada-valprint.c: Update.
* amd64-tdep.c: Update.
* arch-utils.c: Update.
* break-catch-throw.c: Update.
* breakpoint.c: Update.
* btrace.c: Update.
* c-varobj.c: Update.
* cli/cli-cmds.c: Update.
* cli/cli-interp.c: Update.
* cli/cli-script.c: Update.
* common/common-exceptions.c: Update.
* common/new-op.c: Update.
* common/selftest.c: Update.
* compile/compile-c-symbols.c: Update.
* compile/compile-cplus-symbols.c: Update.
* compile/compile-object-load.c: Update.
* compile/compile-object-run.c: Update.
* completer.c: Update.
* corelow.c: Update.
* cp-abi.c: Update.
* cp-support.c: Update.
* cp-valprint.c: Update.
* darwin-nat.c: Update.
* disasm-selftests.c: Update.
* dtrace-probe.c: Update.
* dwarf-index-cache.c: Update.
* dwarf-index-write.c: Update.
* dwarf2-frame-tailcall.c: Update.
* dwarf2-frame.c: Update.
* dwarf2loc.c: Update.
* dwarf2read.c: Update.
* eval.c: Update.
* event-loop.c: Update.
* event-top.c: Update.
* exec.c: Update.
* f-valprint.c: Update.
* fbsd-tdep.c: Update.
* frame-unwind.c: Update.
* frame.c: Update.
* gdbtypes.c: Update.
* gnu-v3-abi.c: Update.
* guile/guile-internal.h: Update.
* guile/scm-block.c: Update.
* guile/scm-breakpoint.c: Update.
* guile/scm-cmd.c: Update.
* guile/scm-disasm.c: Update.
* guile/scm-frame.c: Update.
* guile/scm-lazy-string.c: Update.
* guile/scm-math.c: Update.
* guile/scm-param.c: Update.
* guile/scm-ports.c: Update.
* guile/scm-pretty-print.c: Update.
* guile/scm-symbol.c: Update.
* guile/scm-symtab.c: Update.
* guile/scm-type.c: Update.
* guile/scm-value.c: Update.
* i386-linux-tdep.c: Update.
* i386-tdep.c: Update.
* inf-loop.c: Update.
* infcall.c: Update.
* infcmd.c: Update.
* infrun.c: Update.
* jit.c: Update.
* language.c: Update.
* linespec.c: Update.
* linux-fork.c: Update.
* linux-nat.c: Update.
* linux-tdep.c: Update.
* linux-thread-db.c: Update.
* main.c: Update.
* mi/mi-cmd-break.c: Update.
* mi/mi-cmd-stack.c: Update.
* mi/mi-interp.c: Update.
* mi/mi-main.c: Update.
* objc-lang.c: Update.
* p-valprint.c: Update.
* parse.c: Update.
* ppc-linux-tdep.c: Update.
* printcmd.c: Update.
* python/py-arch.c: Update.
* python/py-breakpoint.c: Update.
* python/py-cmd.c: Update.
* python/py-finishbreakpoint.c: Update.
* python/py-frame.c: Update.
* python/py-framefilter.c: Update.
* python/py-gdb-readline.c: Update.
* python/py-inferior.c: Update.
* python/py-infthread.c: Update.
* python/py-lazy-string.c: Update.
* python/py-linetable.c: Update.
* python/py-objfile.c: Update.
* python/py-param.c: Update.
* python/py-prettyprint.c: Update.
* python/py-progspace.c: Update.
* python/py-record-btrace.c: Update.
* python/py-record.c: Update.
* python/py-symbol.c: Update.
* python/py-type.c: Update.
* python/py-unwind.c: Update.
* python/py-utils.c: Update.
* python/py-value.c: Update.
* python/python.c: Update.
* record-btrace.c: Update.
* record-full.c: Update.
* remote-fileio.c: Update.
* remote.c: Update.
* riscv-tdep.c: Update.
* rs6000-aix-tdep.c: Update.
* rs6000-tdep.c: Update.
* rust-exp.y: Update.
* rust-lang.c: Update.
* s390-tdep.c: Update.
* selftest-arch.c: Update.
* solib-dsbt.c: Update.
* solib-frv.c: Update.
* solib-spu.c: Update.
* solib-svr4.c: Update.
* solib.c: Update.
* sparc64-linux-tdep.c: Update.
* stack.c: Update.
* symfile-mem.c: Update.
* symmisc.c: Update.
* target.c: Update.
* thread.c: Update.
* top.c: Update.
* tracefile-tfile.c: Update.
* tui/tui.c: Update.
* typeprint.c: Update.
* unittests/cli-utils-selftests.c: Update.
* unittests/parse-connection-spec-selftests.c: Update.
* valops.c: Update.
* valprint.c: Update.
* value.c: Update.
* varobj.c: Update.
* windows-nat.c: Update.
* x86-linux-nat.c: Update.
* xml-support.c: Update.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* gdbreplay.c: Update.
* linux-low.c: Update.
* server.c: Update.
|
|
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
|
