| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This commit does most of the mechanical removal. IOW, the easy part.
procfs.c isn't touched beyond removing a couple obvious bits that are
guarded by a couple macros defined in config/alpha/nm-osf3.h. Going
beyond that for procfs.c & co would be a harder excision that
potentially affects Solaris.
Some comments in the generic alpha code ABIs that may still be
relevant and I wouldn't know what to do with them. That can always be
done on a separate pass, preferably by someone who can test on alpha.
A couple other spots have references to OSF/Tru64 and related files
being removed, but it felt like removing them would make things worse,
not better. We can revisit those when we next need to touch that
code.
I didn't remove a reference to osf in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.
Built and tested on x86_64 Fedora 20, with --enable-targets=all.
Tested that building for --target=alpha-osf3 on x86_64 Fedora 20
fails with:
checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration alpha-unknown-osf3 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `build-osf'
make: *** [all] Error 2
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_64_TARGET_OBS): Remove alpha-osf1-tdep.o.
(HFILES_NO_SRCDIR): Remove config/alpha/nm-osf3.h.
(ALLDEPFILES): Remove alpha-nat.c, alpha-osf1-tdep.c and
solib-osf.c.
* NEWS: Mention that support for alpha*-*-osf* has been removed.
* ada-lang.h [__alpha__ && __osf__]
(ADA_KNOWN_RUNTIME_FILE_NAME_PATTERNS): Delete.
* alpha-nat.c, alpha-osf1-tdep.c: Delete files.
* alpha-tdep.c (alpha_gdbarch_init): Remove reference to
GDB_OSABI_OSF1.
* config/alpha/alpha-osf3.mh, config/alpha/nm-osf3.h: Delete
files.
* config/djgpp/fnchange.lst (config/alpha/alpha-osf1.mh)
(config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh): Delete.
* configure: Regenerate.
* configure.ac: Remove references to osf.
* configure.host: Handle alpha*-*-osf* in the obsolete hosts
section. Remove all other references to osf.
* configure.tgt: Add alpha*-*-osf* to the obsolete targets section.
Remove all other references to osf.
* dec-thread.c: Delete file.
* defs.h (GDB_OSABI_OSF1): Delete.
* inferior.h (START_INFERIOR_TRAPS_EXPECTED): New unconditionally
defined.
* osabi.c (gdb_osabi_names): Delete "OSF/1".
* procfs.c (procfs_debug_inferior) [PROCFS_DONT_TRACE_FAULTS]:
Delete code.
(unconditionally_kill_inferior)
[PROCFS_NEED_CLEAR_CURSIG_FOR_KILL]: Delete code.
* solib-osf.c: Delete file.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.base/callfuncs.exp: emove references to osf.
* gdb.base/sigall.exp: Likewise.
* gdb.gdb/selftest.exp: Likewise.
* gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
* gdb.mi/non-stop.c: Likewise.
* gdb.mi/pthreads.c: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/sigall-reverse.exp: Likewise.
* gdb.threads/pthreads.c: Likewise.
* gdb.threads/pthreads.exp: Likewise.
gdb/doc/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Ada Tasks and Core Files): Delete mention of Tru64.
(SVR4 Process Information): Delete mention of OSF/1.
|
|
Seems to me that we can simplify DEC thread's
target_update_thread_list implementation, avoiding the need to build
the array of GDB threads.
I have no way to test this, but then again support for Tru64 is about
to be removed.
Pushing anyway to have the last version in git be the cleanest one
should start from, if this file turns out to be resurrected in the
future.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* dec-thread.c (dec_thread_count_gdb_threads)
(dec_thread_add_gdb_thread): Delete.
(dec_thread_update_thread_list): Delete.
(dec_thread_find_new_threads): Rename to ...
(dec_thread_update_thread_list): ... this. Delete GDB-size
threads that are no longer found in dec_thread_list.
(resync_thread_list): Delete.
(dec_thread_wait): Call dec_thread_update_thread_list instead of
resync_thread_list.
|
|
When GDB wants to sync the thread list with the target's (e.g., due to
"info threads"), it calls update_thread_list:
update_thread_list (void)
{
prune_threads ();
target_find_new_threads ();
update_threads_executing ();
}
And then prune_threads does:
prune_threads (void)
{
struct thread_info *tp, *next;
for (tp = thread_list; tp; tp = next)
{
next = tp->next;
if (!thread_alive (tp))
delete_thread (tp->ptid);
}
}
Calling thread_live on each thread one by one is expensive.
E.g., on Linux, it ends up doing kill(SIG0) once for each thread. Not
a big deal, but still a bunch of syscalls...
With the remote target, it's cumbersome. That thread_alive call ends
up generating one T packet per thread:
Sending packet: $Tp2141.2150#82...Packet received: OK
Sending packet: $Tp2141.214f#b7...Packet received: OK
Sending packet: $Tp2141.2141#82...Packet received: OK
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n
That seems a bit silly when target_find_new_threads method
implementations will always fetch the whole current set of target
threads, and then add those that are not in GDB's thread list, to
GDB's thread list.
This patch thus pushes down the responsibility of pruning dead threads
to the target_find_new_threads method instead, so a target may
implement pruning dead threads however it wants.
Once we do that, target_find_new_threads becomes a misnomer, so the
patch renames it to target_update_thread_list.
The patch doesn't attempt to do any optimization to any target yet.
It simply exports prune_threads, and makes all implementations of
target_update_thread_list call that. It's meant to be a no-op.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* ada-tasks.c (print_ada_task_info, task_command_1): Adjust.
* bsd-uthread.c (bsd_uthread_find_new_threads): Rename to ...
(bsd_uthread_update_thread_list): ... this. Call prune_threads.
(bsd_uthread_target): Adjust.
* corelow.c (core_open): Adjust.
* dec-thread.c (dec_thread_find_new_threads): Update comment.
(dec_thread_update_thread_list): New function.
(init_dec_thread_ops): Adjust.
* gdbthread.h (prune_threads): New declaration.
* linux-thread-db.c (thread_db_find_new_threads): Rename to ...
(thread_db_update_thread_list): ... this. Call prune_threads.
(init_thread_db_ops): Adjust.
* nto-procfs.c (procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
(procfs_attach, procfs_create_inferior, init_procfs_targets):
Adjust.
* obsd-nat.c (obsd_find_new_threads): Rename to ...
(obsd_update_thread_list): ... this. Call prune_threads.
(obsd_add_target): Adjust.
* procfs.c (procfs_target): Adjust.
(procfs_notice_thread): Update comment.
(procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
* ravenscar-thread.c (ravenscar_update_inferior_ptid): Update
comment.
(ravenscar_wait): Adjust.
(ravenscar_find_new_threads): Rename to ...
(ravenscar_update_thread_list): ... this. Call prune_threads.
(init_ravenscar_thread_ops): Adjust.
* record-btrace.c (record_btrace_find_new_threads): Rename to ...
(record_btrace_update_thread_list): ... this. Adjust comment.
(init_record_btrace_ops): Adjust.
* remote.c (remote_threads_info): Rename to ...
(remote_update_thread_list): ... this. Call prune_threads.
(remote_start_remote, extended_remote_attach_1, init_remote_ops):
Adjust.
* sol-thread.c (check_for_thread_db): Adjust.
(sol_find_new_threads_callback): Rename to ...
(sol_update_thread_list_callback): ... this.
(sol_find_new_threads): Rename to ...
(sol_update_thread_list): ... this. Call prune_threads. Adjust.
(sol_get_ada_task_ptid, init_sol_thread_ops): Adjust.
* target-delegates.c: Regenerate.
* target.c (target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* target.h (struct target_ops): Rename to_find_new_threads field
to to_update_thread_list.
(target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* thread.c (prune_threads): Make extern.
(update_thread_list): Adjust.
|
|
This patch changes a few minimal symbol lookup functions to return a
bound_minimal_symbol rather than a pointer to the minsym. This change
helps prepare gdb for computing a minimal symbol's address at the
point of use.
Note that this changes even those functions that ostensibly search a
single objfile. That was necessary because, in fact, those functions
can search an objfile and its separate debug objfiles; and it is
important for the caller to know in which objfile the minimal symbol
was actually found.
The bulk of this patch is mechanical.
2014-02-26 Tom Tromey <tromey@redhat.com>
* ada-lang.c (ada_update_initial_language): Update.
(ada_main_name, ada_has_this_exception_support): Update.
* ada-tasks.c (ada_tasks_inferior_data_sniffer): Update.
* aix-thread.c (pdc_symbol_addrs, pd_enable): Update.
* arm-tdep.c (arm_skip_stub): Update.
* auxv.c (ld_so_xfer_auxv): Update.
* avr-tdep.c (avr_scan_prologue): Update.
* ax-gdb.c (gen_var_ref): Update.
* breakpoint.c (struct breakpoint_objfile_data)
<overlay_msym, longjmp_msym, terminate_msym, exception_msym>: Change
type to bound_minimal_symbol.
(create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint): Update.
* bsd-uthread.c (bsd_uthread_lookup_address): Update.
* c-exp.y (classify_name): Update.
* coffread.c (coff_symfile_read): Update.
* common/agent.c (agent_look_up_symbols): Update.
* d-lang.c (d_main_name): Update.
* dbxread.c (find_stab_function_addr, end_psymtab): Update.
* dec-thread.c (enable_dec_thread): Update.
* dwarf2loc.c (call_site_to_target_addr): Update.
* elfread.c (elf_gnu_ifunc_resolve_by_got): Update.
* eval.c (evaluate_subexp_standard): Update.
* findvar.c (struct minsym_lookup_data) <result>: Change type
to bound_minimal_symbol.
<objfile>: Remove.
(minsym_lookup_iterator_cb, default_read_var_value): Update.
* frame.c (inside_main_func): Update.
* frv-tdep.c (frv_frame_this_id): Update.
* gcore.c (call_target_sbrk): Update.
* glibc-tdep.c (glibc_skip_solib_resolver): Update.
* gnu-v3-abi.c (gnuv3_get_typeid, gnuv3_skip_trampoline):
Update.
* go-lang.c (go_main_name): Update.
* hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code)
(hppa_hpux_find_import_stub_for_addr): Update.
* hppa-tdep.c (hppa_extract_17, hppa_lookup_stub_minimal_symbol):
Update. Change return type.
* hppa-tdep.h (hppa_lookup_stub_minimal_symbol): Change return
type.
* jit.c (jit_breakpoint_re_set_internal): Update.
* linux-fork.c (inferior_call_waitpid, checkpoint_command):
Update.
* linux-nat.c (get_signo): Update.
* linux-thread-db.c (inferior_has_bug): Update
* m32c-tdep.c (m32c_return_value)
(m32c_m16c_address_to_pointer): Update.
* m32r-tdep.c (m32r_frame_this_id): Update.
* m68hc11-tdep.c (m68hc11_get_register_info): Update.
* machoread.c (macho_resolve_oso_sym_with_minsym): Update.
* minsyms.c (lookup_minimal_symbol_internal): Rename to
lookup_minimal_symbol. Change return type.
(lookup_minimal_symbol): Remove.
(lookup_bound_minimal_symbol): Update.
(lookup_minimal_symbol_text): Change return type.
(lookup_minimal_symbol_solib_trampoline): Change return type.
* minsyms.h (lookup_minimal_symbol, lookup_minimal_symbol_text)
(lookup_minimal_symbol_solib_trampoline): Change return type.
* mips-linux-tdep.c (mips_linux_skip_resolver): Update.
* objc-lang.c (lookup_objc_class, lookup_child_selector)
(value_nsstring, find_imps): Update.
* obsd-tdep.c (obsd_skip_solib_resolver): Update.
* p-lang.c (pascal_main_name): Update.
* ppc-linux-tdep.c (ppc_linux_spe_context_lookup): Update.
* ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update.
* proc-service.c (ps_pglobal_lookup): Update.
* ravenscar-thread.c (get_running_thread_msymbol): Change
return type.
(has_ravenscar_runtime, get_running_thread_id): Update.
* remote.c (remote_check_symbols): Update.
* sol-thread.c (ps_pglobal_lookup): Update.
* sol2-tdep.c (sol2_skip_solib_resolver): Update.
* solib-dsbt.c (lm_base): Update.
* solib-frv.c (lm_base, frv_relocate_section_addresses):
Update.
* solib-irix.c (locate_base): Update.
* solib-som.c (som_solib_create_inferior_hook)
(som_solib_desire_dynamic_linker_symbols, link_map_start):
Update.
* solib-spu.c (spu_enable_break): Update.
* solib-svr4.c (elf_locate_base, enable_break): Update.
* spu-tdep.c (spu_get_overlay_table, spu_catch_start)
(flush_ea_cache): Update.
* stabsread.c (define_symbol): Update.
* symfile.c (simple_read_overlay_table): Update.
* symtab.c (find_pc_sect_line): Update.
* tracepoint.c (scope_info): Update.
* tui-disasm.c (tui_get_begin_asm_address): Update.
* value.c (value_static_field): Update.
|
|
This patch fixes the following ARI warning:
gdb/dec-thread.c:695: regression: multi-line string: Multi-line string
must have the newline escaped
I think the new-line was unintentional, so I simply removed it,
and then reformatted the string to fit within our 70-80 max characters-
per-line rule.
gdb/ChangeLog:
* dec-thread.c (dec_thread_get_ada_task_ptid): Avoid unescaped
new-line in debug string. Remove trailing spaces.
|
|
2014-02-19 Tom Tromey <tromey@redhat.com>
* windows-nat.c (windows_get_ada_task_ptid): Add 'self' argument.
* target.h (struct target_ops) <to_get_ada_task_ptid>: Add
argument.
(target_get_ada_task_ptid): Add argument.
* target.c (update_current_target): Update.
(default_get_ada_task_ptid): Add 'self' argument.
* sol-thread.c (sol_get_ada_task_ptid): Add 'self' argument.
* remote.c (remote_get_ada_task_ptid): Add 'self' argument.
* ravenscar-thread.c (ravenscar_get_ada_task_ptid): Add 'self'
argument.
* linux-thread-db.c (thread_db_get_ada_task_ptid): Add 'self'
argument.
* inf-ttrace.c (inf_ttrace_get_ada_task_ptid): Add 'self'
argument.
* dec-thread.c (dec_thread_get_ada_task_ptid): Add 'self'
argument.
* darwin-nat.c (darwin_get_ada_task_ptid): Add 'self' argument.
* aix-thread.c (aix_thread_get_ada_task_ptid): Add 'self'
argument.
|
|
|
|
This patch constifies the target_ops method to_detach.
This is a small cleanup, but also, I think, a bug-prevention fix,
since gdb already acts as if the "args" argument here was const.
In particular, top.c:quit_force calls kill_or_detach via
iterate_over_inferiors. kill_or_detach calls target_detach, passing
the same argument each time. So, if one of these methods was not
const-correct, then kill_or_detach would change its behavior in a
strange way.
I could not build every target I modified in this patch. I've
inspected them all by hand, though. Many targets do not use the
"args" parameter; a couple pass it to atoi; and a few pass it on to
the to_detach method of the target beneath. The only code that
required a real change was in linux-nat.c, and that only needed the
introduction of a temporary variable for const-correctness.
2013-11-08 Tom Tromey <tromey@redhat.com>
* aix-thread.c (aix_thread_detach): Update.
* corelow.c (core_detach): Update.
* darwin-nat.c (darwin_detach): Update.
* dec-thread.c (dec_thread_detach): Update.
* gnu-nat.c (gnu_detach): Update.
* go32-nat.c (go32_detach): Update.
* inf-ptrace.c (inf_ptrace_detach): Update.
* inf-ttrace.c (inf_ttrace_detach): Update.
* linux-fork.c (linux_fork_detach): Update.
* linux-fork.h (linux_fork_detach): Update.
* linux-nat.c (linux_nat_detach): Update. Introduce "tem"
local for const-correctness.
* linux-thread-db.c (thread_db_detach): Update.
* monitor.c (monitor_detach): Update.
* nto-procfs.c (procfs_detach): Update.
* procfs.c (procfs_detach): Update.
* record.c (record_detach): Update.
* record.h (record_detach): Update.
* remote-m32r-sdi.c (m32r_detach): Update.
* remote-mips.c (mips_detach): Update.
* remote-sim.c (gdbsim_detach): Update.
* remote.c (remote_detach_1, remote_detach)
(extended_remote_detach): Update.
* sol-thread.c (sol_thread_detach): Update.
* target.c (target_detach): Make "args" const.
(init_dummy_target): Update.
* target.h (struct target_ops) <to_detach>: Make argument const.
(target_detach): Likewise.
* windows-nat.c (windows_detach): Update.
|
|
This removes a few more erroneous calls to add_target. These calls
end up installing the target in a user-visible way; but these targets
are all auto-activated and, I think, should never be explicitly
requested.
I have no way to test these.
* aix-thread.c (_initialize_aix_thread): Use
complete_target_initialization.
* bsd-uthread.c (_initialize_bsd_uthread): Use
complete_target_initialization.
* dec-thread.c (_initialize_dec_thread): Use
complete_target_initialization.
* ravenscar-thread.c (_initialize_ravenscar): Use
complete_target_initialization.
* sol-thread.c (_initialize_sol_thread): Use
complete_target_initialization.
* spu-multiarch.c (_initialize_spu_multiarch): Use
complete_target_initialization.
|
|
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
|
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
|
|
are unneeded as there is a new line added at the end of the message
automatically.
* darwin-nat.c (darwin_stop_inferior): Ditto.
* dec-thread.c (dec_thread_get_ada_task_ptid): Ditto.
* dfp.c (decimal_to_number): Ditto.
* exec.c (print_section_info): Ditto.
* i386-darwin-nat.c (darwin_set_sstep): Ditto.
* osdata.c (get_osdata): Ditto.
* record.c (bfdcore_write): Ditto.
* remote-mips.c (mips_readchar): Ditto.
* remote.c (read_ptid): Ditto.
* ser-mingw.c (ser_windows_raw): Ditto.
* tracepoint.c (add_local_symbols): Ditto.
* windows-nat.c (fake_create_process): Ditto.
|
|
* ada-lang.c: Comment cleanup, mostly periods and spaces.
* ada-lang.h: Ditto.
* ada-tasks.c: Ditto.
* ada-valprint.c: Ditto.
* aix-threads.c: Ditto.
* alpha-linux-nat.c: Ditto.
* alpha-linux-tdep.c: Ditto.
* alpha-mdebug-tdep.c: Ditto.
* alpha-nat.c: Ditto.
* alpha-osf1-tdep.c: Ditto.
* alpha-tdep.c: Ditto.
* alphabsd-nat.c: Ditto.
* alphabsd-tdep.c: Ditto.
* amd64-darwin-tdep.c: Ditto.
* amd64-linux-nat.c: Ditto.
* amd64-linux-tdep.c: Ditto.
* amd64-sol2-tdep.c: Ditto.
* amd64-tdep.c: Ditto.
* amd64-fbsd-tdep.c: Ditto.
* amd64-nbsd-tdep.c: Ditto.
* amd64-obsd-tdep.c: Ditto.
* amd64-linux-nat.c: Ditto.
* amd64-linux-tdep.c: Ditto.
* arm-tdep.c: Ditto.
* arm-tdep.h: Ditto.
* armnbsd-nat.c: Ditto.
* avr-tdep.c: Ditto.
* bfin-tdep.c: Ditto.
* bsd-kvm.c: Ditto.
* c-typeprintc: Ditto.
* c-valprint.c: Ditto.
* coff-pe-read.h: Ditto.
* coffreead.c: Ditto.
* cris-tdep.c: Ditto.
* d-lang.c: Ditto.
* darwin-nat-info.c: Ditto.
* darwin-nat.c: Ditto.
* dbug-rom.c: Ditto.
* dbxread.c: Ditto.
* dcache.c: Ditto.
* dcache.h: Ditto.
* dec-thread.c: Ditto.
* defs.h: Ditto.
* demangle.c: Ditto.
* dicos-tdep.c: Ditto.
* dictionary.c: Ditto.
* dictionary.h: Ditto.
* dink32-rom.c: Ditto.
* disasm.c: Ditto.
* doublest.c: Ditto.
* dsrec.c: Ditto.
* dummy-frame.c: Ditto.
* dwarf2-frame.c: Ditto.
* dwarf2expr.c: Ditto.
* dwarf2loc.c: Ditto.
* dwarf2read.c: Ditto.
* elfread.c: Ditto.
* environ.c: Ditto.
* eval.c: Ditto.
* event-top.h: Ditto.
* exceptions.c: Ditto.
* exceptions.h: Ditto.
* exec.c: Ditto.
* expprint.c: Ditto.
* expression.h: Ditto.
* f-exp.y: Ditto.
* f-lang.c: Ditto.
* f-lang.h: Ditto.
* f-typeprint.c: Ditto.
* f-valprint.c: Ditto.
* fbsd-nat.c: Ditto.
* findvar.c: Ditto.
* fork-child.c: Ditto.
* frame.c: Ditto.
* frame.h: Ditto.
* frv-linux-tdep.c: Ditto.
* frv-tdep.c: Ditto.
* gcore.c: Ditto.
* gdb-stabs.h: Ditto.
* gdb_assert.h: Ditto.
* gdb_string.h: Ditto.
* gdb_thread_db.h: Ditto.
* gdb_wait.h: Ditto.
* gdbarch.sh: Ditto.
* gdbcore.h: Ditto.
* gdbthread.h: Ditto.
* gdbtypes.c: Ditto.
* gdbtypes.h: Ditto.
* gnu-nat.c: Ditto.
* gnu-nat.h: Ditto.
* gnu-v2-abi.c: Ditto.
* gnu-v3-abi.c: Ditto.
* go32-nat.c: Ditto.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
|
|
|
|
Thread support currently does not work with core files. Note that,
in order to thread support to work on tru64, one need to allow GDB
to write in the core file (this is because the thread debug library
needs to write).
An obvious visible symptom of the problem is that "info threads" does
not list the various threads:
(gdb) info threads
* 1 <main task> 0x000003ff805c0918 in __nxm_thread_kill ()
from /usr/shlib/libpthread.so
One other noticeable consequence is that GDB generates some warnings
when using "info tasks":
(gdb) info tasks
warning: Could not find thread id from THREAD = 0x3ffc01b6000
warning: Could not find thread id from THREAD = 0x20000e2b4c0
ID TID P-ID Pri State Name
* 1 140051000 0 30 Runnable main_task
* 2 14005c000 1 30 Accept or Select Term my_t
(notice also how both tasks are marked as being the active task,
which cannot be true).
The problem is that the dec-thread module has not updated its thread list
after the core file got loaded. In fact, the list only gets resync'ed
at the end of each target-wait. The solution was to implement the
find_new_threads target_ops method.
gdb/ChangeLog:
Implement thread support with core files on alpha-tru64.
* dec-thread.c (dec_thread_find_new_threads): New function,
extracted from resync_thread_list.
(resync_thread_list): Add OPS parameter. Replace extracted-out
code by call to dec_thread_find_new_threads.
(dec_thread_wait): Update call to resync_thread_list.
(init_dec_thread_ops): Set dec_thread_ops.to_find_new_threads.
|
|
* dec-thread.c (dec_thread_ptid_is_alive): New function.
(dec_thread_count_gdb_threads): Fix counter increment.
(dec_thread_add_gdb_thread): Fix *listp increment.
(resync_thread_list): Fix bug in deletion of dead threads that
caused all threads to be deleted, instead of just the dead ones.
|
|
* dec-thread.c (dec_thread_count_gdb_threads)
(dec_thread_add_gdb_thread): Prevent -Wunused warning.
|
|
Automatic update by copyright.sh.
|
|
to call the to_wait method in the target beneath.
* remote-m32r-sdi.c (m32r_wait): Add options parameter.
|
|
on Tru64.
* dec-thread.c (dec_thread_get_ada_task_ptid): New function.
(init_dec_thread_ops): Set the to_get_ada_task_ptid method.
|
|
to find the underlying target.
* dec-thread.c (base_target): Delete.
(enable_dec_thread): Remove assignement to base_target.
(dec_thread_detach, dec_thread_wait, dec_thread_wait)
(dec_thread_fetch_registers, dec_thread_store_registers)
(dec_thread_mourn_inferior, dec_thread_pid_to_str):
Update the function profile if necessary.
Use find_target_beneath to call the same method but from
the underlying target, removing the need for "base_target".
* dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
Fix a copy/paste error in a few debug traces...
* solib-osf.c (init_so): Use a simpler method for computing
the size of lm_info structure. This also gets rid of warning
emitted by the compiler.
|
|
(linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
* linux-nat.h (thread_db_init): Delete declaration.
* linux-thread-db.c (target_beneath): Delete.
(thread_db_init): Delete.
(thread_db_detach): Use find_target_beneath.
(thread_db_wait): Adjust interface. Use find_target_beneath.
(thread_db_mourn_inferior): Use find_target_beneath.
(thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
(thread_db_async_mask): Delete.
(thread_db_pid_to_str): Adjust interface. Use
find_target_beneath.
(thread_db_get_thread_local_address): Adjust interface. Use
find_target_beneath.
(init_thread_db_ops): Delete references to delete functions.
* target.c (update_current_target): Don't inherit or default
to_wait. Don't inherit to_pid_to_str and
to_get_thread_local_address.
(target_translate_tls_address): Look for a pushed target that
implements to_get_thread_local_address, and use it instead of
checking for target_get_thread_local_address_p.
(target_wait, target_pid_to_str): Reimplement as functions.
(dummy_pid_to_str): New.
(init_dummy_target): Register it.
(debug_to_wait): Delete.
* target.h (struct target_ops): Make to_wait, to_pid_to_str and
to_get_thread_local_address accept a pointer to struct target_ops.
(target_wait): Delete macro, and declare as function.
(target_pid_to_str): Likewise.
(target_get_thread_local_address)
(target_get_thread_local_address_p): Delete.
(noprocess): Add NORETURN and ATTR_NORETURN tags.
* inf-ptrace.c (inf_ptrace_wait): Adjust.
(inf_ptrace_pid_to_str): New.
(inf_ptrace_target): Use inf_ptrace_pid_to_str.
* aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
* bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
* bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
Adjust.
* corelow.c (core_pid_to_str): Adjust.
* darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
* dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
* gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
* go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
* hpux-thread.c (hpux_thread_wait): Adjust.
* inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
* monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
* nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
* procfs.c (procfs_pid_to_str): Adjust.
* remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
* remote-mips.c (mips_wait): Adjust.
* remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
* remote.c (remote_wait, remote_pid_to_str)
(remote_get_thread_local_address): Adjust.
* rs6000-nat.c (rs6000_wait): Adjust.
* sol-thread.c (procfs_pid_to_str): Adjust declaration.
(sol_thread_wait, solaris_pid_to_str): Adjust.
* spu-linux-nat.c (spu_child_wait): Adjust.
* windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
|
|
|
|
* target.h (struct target_ops): Make to_attach, to_detach,
to_create_inferior and to_mourn_inferior accept a pointer
to struct target_ops.
(target_attach, target_create_inferior, target_create_inferior):
Convert from macros to function. Find the right target to
invoke a method of.
(find_default_attach, find_default_create_inferior): New parameter
ops.
* corefile.c (core_file_command): Pass target to to_detach.
* corelow.c (core_detach): Add 'ops' parameter.
* fork-child.c (fork_inferior): Return the pid. Allow
init_trace_fun to be NULL.
* inf-ptrace (ptrace_ops_hack): Remove.
(inf_ptrace_him): Remove, moving all logic into....
(inf_ptrace_create_inferior): ... here. Push the target
passed as parameter.
(inf_ptrace_mourn_inferior, inf_ptrace_attach, inf_ptrace_detach):
Push/pop target passed as parameter, no ptrace_ops_hack.
(inf_ptrace_target): Don't remember result.
* inferior.h (fork_inferior): Adjust prototype.
* linux-nat.c (linux_nat_create_inferior, linux_nat_attach)
(linux_nat_detach, linux_nat_mourn_inferior): New parameter ops.
Pass it to linux_ops target.
* linux-thread-db.c (thread_db_detach, thread_db_mourn_inferior):
New parameter ops. Pass it to the target beneath.
* remote.c (remote_mourn, extended_remote_mourn, remote_detach)
(extended_remote_create_inferior): New parameter ops. Pass it
further.
* target.c (debug_to_attach, debug_to_detach)
(debug_to_mourn_inferior): New parameter ops.
(target_create_inferior): New.
(update_current_target): Do not inherit to_attach, to_detach,
to_create_inferiour, to_mourn_inferior. Do not default
to_detach and to_mourn_inferior.
(target_detach): Find the right target to use.
(target_mourn_inferior): New.
(find_default_attach, find_default_create_inferior): New parameter
ops. Pass the found target when calling its method.
(init_dummy_target): Provide fallback definition of to_detach.
(target_attach): New.
(debug_to_attach, debug_to_detach, debug_to_create_inferior)
(debug_to_mourn_inferiour): New parameter ops.
* aix-thread.c: Adjust.
* bsd-uthread.c: Adjust.
* gnu-nat.c: Adjust.
* go32-nat.c: Adjust.
* hpux-thread.c: Adjust.
* inf-ttrace.c: Ajust.
* monitor.c: Adjust.
* nto-procfs.c: Adjust.
* procfs.c: Adjust.
* remote-m32r-sdi.c: Adjust.
* remote-mips.c: Adjust.
* remote-sim.c: Adjust.
* rs6000-nat.c: Adjust.
* sol-thread.c: Adjust.
* win32-nat.c: Adjust.
* dec-thread.c: Adjust.
|
|
* config/alpha/alpha-osf3.mh (NATDEPFILES): Add dec-thread.o.
(NAT_CLIBS): Define.
|
