| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This commit extends GDB to make use of libopcodes styling support
where available, currently this is just i386 based architectures, and
RISC-V.
For architectures that don't support styling using libopcodes GDB will
fall back to using the Python Pygments package, when the package is
available.
The new libopcodes based styling has the disassembler identify parts
of the disassembled instruction, e.g. registers, immediates,
mnemonics, etc, and can style these components differently.
Additionally, as the styling is now done in GDB we can add settings to
allow the user to configure which colours are used right from the GDB
CLI.
There's some new maintenance commands:
maintenance set libopcodes-styling enabled on|off
maintenance show libopcodes-styling
These can be used to manually disable use of libopcodes styling. This
is a maintenance command as it's not anticipated that a user should
need to do this. But, this could be useful for testing, or, in some
rare cases, a user might want to override the Python hook used for
disassembler styling, and then disable libopcode styling so that GDB
falls back to using Python. Right now I would consider this second
use case a rare situation, which is why I think a maintenance command
is appropriate.
When libopcodes is being used for styling then the user can make use
of the following new styles:
set/show style disassembler comment
set/show style disassembler immediate
set/show style disassembler mnemonic
set/show style disassembler register
The disassembler also makes use of the 'address' and 'function'
styles to style some parts of the disassembler output. I have also
added the following aliases though:
set/show style disassembler address
set/show style disassembler symbol
these are aliases for:
set/show style address
set/show style function
respectively, and exist to make it easier for users to discover
disassembler related style settings. The 'address' style is used to
style numeric addresses in the disassembler output, while the 'symbol'
or 'function' style is used to style the names of symbols in
disassembler output.
As not every architecture supports libopcodes styling, the maintenance
setting 'libopcodes-styling enabled' has an "auto-off" type behaviour.
Consider this GDB session:
(gdb) show architecture
The target architecture is set to "auto" (currently "i386:x86-64").
(gdb) maintenance show libopcodes-styling enabled
Use of libopcodes styling support is "on".
the setting defaults to "on" for architectures that support libopcodes
based styling.
(gdb) set architecture sparc
The target architecture is set to "sparc".
(gdb) maintenance show libopcodes-styling enabled
Use of libopcodes styling support is "off" (not supported on architecture "sparc")
the setting will show as "off" if the user switches to an architecture
that doesn't support libopcodes styling. The underlying setting is
still "on" at this point though, if the user switches back to
i386:x86-64 then the setting would go back to being "on".
(gdb) maintenance set libopcodes-styling enabled off
(gdb) maintenance show libopcodes-styling enabled
Use of libopcodes styling support is "off".
now the setting is "off" for everyone, even if the user switches back
to i386:x86-64 the setting will still show as "off".
(gdb) maintenance set libopcodes-styling enabled on
Use of libopcodes styling not supported on architecture "sparc".
(gdb) maintenance show libopcodes-styling enabled
Use of libopcodes styling support is "off".
attempting to switch the setting "on" for an unsupported architecture
will give an error, and the setting will remain "off".
(gdb) set architecture auto
The target architecture is set to "auto" (currently "i386:x86-64").
(gdb) maintenance show libopcodes-styling enabled
Use of libopcodes styling support is "off".
(gdb) maintenance set libopcodes-styling enabled on
(gdb) maintenance show libopcodes-styling enabled
Use of libopcodes styling support is "on".
the user will need to switch back to a supported architecture before
they can one again turn this setting "on".
|
|
This commit adds styling support to the disassembler output, as such
two new commands are added to GDB:
set style disassembler enabled on|off
show style disassembler enabled
In this commit I make use of the Python Pygments package to provide
the styling. I did investigate making use of libsource-highlight,
however, I found the highlighting results to be inferior to those of
Pygments; only some mnemonics were highlighted, and highlighting of
register names such as r9d and r8d (on x86-64) was incorrect.
To enable disassembler highlighting via Pygments, I've added a new
extension language hook, which is then implemented for Python. This
hook is very similar to the existing hook for source code
colorization.
One possibly odd choice I made with the new hook is to pass a
gdb.Architecture through, even though this is currently unused. The
reason this argument is not used is that, currently, styling is
performed identically for all architectures.
However, even though the Python function used to perform styling of
disassembly output is not part of any documented API, I don't want
to close the door on a user overriding this function to provide
architecture specific styling. To do this, the user would inevitably
require access to the gdb.Architecture, and so I decided to add this
field now.
The styling is applied within gdb_disassembler::print_insn, to achieve
this, gdb_disassembler now writes its output into a temporary buffer,
styling is then applied to the contents of this buffer. Finally the
gdb_disassembler buffer is copied out to its final destination stream.
There's a new test to check that the disassembler output includes some
escape sequences, though I don't check for specific colours; the
precise colors will depend on which instructions are in the
disassembler output, and, I guess, how pygments is configured.
The only negative change with this commit is how we currently style
addresses in GDB.
Currently, when the disassembler wants to print an address, we call
back into GDB, and GDB prints the address value using the `address`
styling, and the symbol name using `function` styling. After this
commit, if pygments is used, then all disassembler styling is done
through pygments, and this include the address and symbol name parts
of the disassembler output.
I don't know how much of an issue this will be for people. There's
already some precedent for this in GDB when we look at source styling.
For example, function names in styled source listings are not styled
using the `function` style, but instead, either GNU Source Highlight,
or pygments gets to decide how the function name should be styled.
If the Python pygments library is not present then GDB will continue
to behave as it always has, the disassembler output is mostly
unstyled, but the address and symbols are styled using the `address`
and `function` styles, as they are today.
However, if the user does `set style disassembler enabled off`, then
all disassembler styling is switched off. This obviously covers the
use of pygments, but also includes the minimal styling done by GDB
when pygments is not available.
|
|
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
|
|
Previously, the prefixname field of struct cmd_list_element was manually
set for prefix commands. This seems verbose and error prone as it
required every single call to functions adding prefix commands to
specify the prefix name while the same information can be easily
generated.
Historically, this was not possible as the prefix field was null for
many commands, but this was fixed in commit
3f4d92ebdf7f848b5ccc9e8d8e8514c64fde1183 by Philippe Waroquiers, so
we can rely on the prefix field being set when generating the prefix
name.
This commit also fixes a use after free in this scenario:
* A command gets created via Python (using the gdb.Command class).
The prefix name member is dynamically allocated.
* An alias to the new command is created. The alias's prefixname is set
to point to the prefixname for the original command with a direct
assignment.
* A new command with the same name as the Python command is created.
* The object for the original Python command gets freed and its
prefixname gets freed as well.
* The alias is updated to point to the new command, but its prefixname
is not updated so it keeps pointing to the freed one.
gdb/ChangeLog:
* command.h (add_prefix_cmd): Remove the prefixname argument as
it can now be generated automatically. Update all callers.
(add_basic_prefix_cmd): Ditto.
(add_show_prefix_cmd): Ditto.
(add_prefix_cmd_suppress_notification): Ditto.
(add_abbrev_prefix_cmd): Ditto.
* cli/cli-decode.c (add_prefix_cmd): Ditto.
(add_basic_prefix_cmd): Ditto.
(add_show_prefix_cmd): Ditto.
(add_prefix_cmd_suppress_notification): Ditto.
(add_prefix_cmd_suppress_notification): Ditto.
(add_abbrev_prefix_cmd): Ditto.
* cli/cli-decode.h (struct cmd_list_element): Replace the
prefixname member variable with a method which generates the
prefix name at runtime. Update all code reading the prefix
name to use the method, and remove all code setting it.
* python/py-cmd.c (cmdpy_destroyer): Remove code to free the
prefixname member as it's now a method.
(cmdpy_function): Determine if the command is a prefix by
looking at prefixlist, not prefixname.
|
|
This commit adds a new 'version' style, which replaces the hard coded
styling currently used for GDB's version string. GDB's version number
is displayed:
1. In the output of 'show version', and
2. When GDB starts up (without the --quiet option).
This new style can only ever affect the first of these two cases as
the second case is printed before GDB has processed any initialization
files, or processed any GDB commands passed on the command line.
However, because the first case exists I think this commit makes
sense, it means the style is no longer hard coded into GDB, and we can
add some tests that the style can be enabled/disabled correctly.
This commit is an alternative to a patch Tom posted here:
https://sourceware.org/pipermail/gdb-patches/2020-June/169820.html
I've used the style name 'version' instead of 'startup' to reflect
what the style is actually used for. If other parts of the startup
text end up being highlighted I imagine they would get their own
styles based on what is being highlighted. I feel this is more inline
with the other style names that are already in use within GDB.
I also decoupled adding this style from the idea of startup options,
and the possibility of auto-saving startup options. Those ideas can
be explored in later patches.
This commit should probably be considered only a partial solution to
issue PR cli/25956. The colours of the style are no longer hard
coded, however, it is still impossible to change the styling of the
version string displayed during startup, so in one sense, the styling
of that string is still "hard coded". A later patch will hopefully
extend GDB to allow it to adjust the version styling before the
initial version string is printed.
gdb/ChangeLog:
PR cli/25956
* cli/cli-style.c: Add 'cli/cli-setshow.h' include.
(version_style): Define.
(cli_style_option::cli_style_option): Add intensity parameter, and
use as appropriate.
(_initialize_cli_style): Register version style set/show commands.
* cli/cli-style.h (cli_style_option): Add intensity parameter.
(version_style): Declare.
* top.c (print_gdb_version): Use version_stype, and styled_string
to print the GDB version string.
gdb/doc/ChangeLog:
PR cli/25956
* gdb.texinfo (Output Styling): Document version style.
gdb/testsuite/ChangeLog:
PR cli/25956
* gdb.base/style.exp (run_style_tests): Add version string test.
(test_startup_version_string): Use version style name.
* lib/gdb-utils.exp (style): Handle version style name.
|
|
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
|
|
This reverts commit eca1f90cf47a2edc1a1cd22e12c6c0f3b900654e. Several
changes were requested, and it seemed simplest to revert it.
gdb/ChangeLog
2020-05-23 Tom Tromey <tom@tromey.com>
Revert commit eca1f90c:
* NEWS: Remove entry for completion styling.
* completer.c (_rl_completion_prefix_display_length): Move
declaration later.
(gdb_fnprint): Revert.
(gdb_display_match_list_1): Likewise.
* cli/cli-style.c (completion_prefix_style)
(completion_difference_style, completion_suffix_style): Remove.
(_initialize_cli_style): Revert.
* cli/cli-style.h (completion_prefix_style)
(completion_difference_style, completion_suffix_style): Don't
declare.
gdb/doc/ChangeLog
2020-05-23 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Output Styling): Don't mention completion styling.
(Editing): Don't mention readline completion styling.
gdb/testsuite/ChangeLog
2020-05-23 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Remove completion styling test.
* lib/gdb-utils.exp (style): Remove completion styles.
|
|
Readline has a styling feature for completion -- if it is enabled, the
common prefix of completions will be displayed in a different style.
This doesn't work in gdb, because gdb implements its own completer.
This patch implements the feature. However, it doesn't directly use
the Readline feature, because gdb can do a bit better: it can let the
user control the styling using the existing mechanisms.
This version incorporates an Emacs idea, via Eli: style the prefix,
the "difference character", and the suffix differently.
gdb/ChangeLog
2020-05-23 Tom Tromey <tom@tromey.com>
* NEWS: Add entry for completion styling.
* completer.c (_rl_completion_prefix_display_length): Move
declaration earlier.
(gdb_fnprint): Use completion_style.
(gdb_display_match_list_1): Likewise.
* cli/cli-style.c (completion_prefix_style)
(completion_difference_style, completion_suffix_style): New
globals.
(_initialize_cli_style): Register new globals.
* cli/cli-style.h (completion_prefix_style)
(completion_difference_style, completion_suffix_style): Declare.
gdb/doc/ChangeLog
2020-05-23 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Output Styling): Mention completion styling.
(Editing): Mention readline completion styling.
gdb/testsuite/ChangeLog
2020-05-23 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Add completion styling test.
* lib/gdb-utils.exp (style): Add completion styles.
|
|
Currently there are many prefix commands that do nothing but call
either help_list or cmd_show_list. I happened to notice that one such
call, for "set print type", used the wrong command list parameter,
causing incorrect output.
Rather than fix this bug in isolation, I decided to eliminate this
possibility by adding two new ways to add prefix commands, which
simply route the call to help_list or cmd_show_list, as appropriate.
This makes it impossible for a mismatch to occur.
In some cases, a bit of output was removed; however, I don't think
this output in general was very useful. It seemed redundant with
what's already printed by help_list. A representative example is this
hunk, removed from ada-lang.c:
- printf_unfiltered (_(\
-"\"set ada\" must be followed by the name of a setting.\n"));
This simplified the CLI style set/show commands quite a bit, and
allowed the deletion of a macro.
This also cleans up some unusual code in windows-tdep.c.
Tested on x86-64 Fedora 30. Note that I have no way to build the
go32-nat.c change.
gdb/ChangeLog
2020-04-17 Tom Tromey <tromey@adacore.com>
* auto-load.c (show_auto_load_cmd): Remove.
(auto_load_show_cmdlist_get): Use add_show_prefix_cmd.
* arc-tdep.c (_initialize_arc_tdep): Use add_show_prefix_cmd.
(maintenance_print_arc_command): Remove.
* tui/tui-win.c (tui_command): Remove.
(tui_get_cmd_list): Use add_basic_prefix_cmd.
* tui/tui-layout.c (tui_layout_command): Remove.
(_initialize_tui_layout): Use add_basic_prefix_cmd.
* python/python.c (user_set_python, user_show_python): Remove.
(_initialize_python): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* guile/guile.c (set_guile_command, show_guile_command): Remove.
(install_gdb_commands): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(info_guile_command): Remove.
* dwarf2/read.c (set_dwarf_cmd, show_dwarf_cmd): Remove.
(_initialize_dwarf2_read): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-style.h (class cli_style_option) <add_setshow_commands>:
Remove do_set and do_show parameters.
* cli/cli-style.c (set_style, show_style): Remove.
(_initialize_cli_style): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(cli_style_option::add_setshow_commands): Remove do_set and
do_show parameters.
(cli_style_option::add_setshow_commands): Use
add_basic_prefix_cmd, add_show_prefix_cmd.
(STYLE_ADD_SETSHOW_COMMANDS): Remove macro.
(set_style_name): Remove.
* cli/cli-dump.c (dump_command, append_command): Remove.
(srec_dump_command, ihex_dump_command, verilog_dump_command)
(tekhex_dump_command, binary_dump_command)
(binary_append_command): Remove.
(_initialize_cli_dump): Use add_basic_prefix_cmd.
* windows-tdep.c (w32_prefix_command_valid): Remove global.
(init_w32_command_list): Remove; move into ...
(_initialize_windows_tdep): ... here. Use add_basic_prefix_cmd.
* valprint.c (set_print, show_print, set_print_raw)
(show_print_raw): Remove.
(_initialize_valprint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* typeprint.c (set_print_type, show_print_type): Remove.
(_initialize_typeprint): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* record.c (set_record_command, show_record_command): Remove.
(_initialize_record): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cli/cli-cmds.c (_initialize_cli_cmds): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(info_command, show_command, set_debug, show_debug): Remove.
* top.h (set_history, show_history): Don't declare.
* top.c (set_history, show_history): Remove.
* target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd)
(unset_tdesc_cmd): Remove.
(_initialize_target_descriptions): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* symtab.c (info_module_command): Remove.
(_initialize_symtab): Use add_basic_prefix_cmd.
* symfile.c (overlay_command): Remove.
(_initialize_symfile): Use add_basic_prefix_cmd.
* sparc64-tdep.c (info_adi_command): Remove.
(_initialize_sparc64_adi_tdep): Use add_basic_prefix_cmd.
* sh-tdep.c (show_sh_command, set_sh_command): Remove.
(_initialize_sh_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* serial.c (serial_set_cmd, serial_show_cmd): Remove.
(_initialize_serial): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Remove.
(_initialize_ser_tcp): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* rs6000-tdep.c (set_powerpc_command, show_powerpc_command)
(_initialize_rs6000_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* riscv-tdep.c (show_riscv_command, set_riscv_command)
(show_debug_riscv_command, set_debug_riscv_command): Remove.
(_initialize_riscv_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* remote.c (remote_command, set_remote_cmd): Remove.
(_initialize_remote): Use add_basic_prefix_cmd.
* record-full.c (set_record_full_command)
(show_record_full_command): Remove.
(_initialize_record_full): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* record-btrace.c (cmd_set_record_btrace)
(cmd_show_record_btrace, cmd_set_record_btrace_bts)
(cmd_show_record_btrace_bts, cmd_set_record_btrace_pt)
(cmd_show_record_btrace_pt): Remove.
(_initialize_record_btrace): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ravenscar-thread.c (set_ravenscar_command)
(show_ravenscar_command): Remove.
(_initialize_ravenscar): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* mips-tdep.c (show_mips_command, set_mips_command)
(_initialize_mips_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_check_command, maintenance_print_command)
(maintenance_set_cmd, maintenance_show_cmd): Remove.
(_initialize_maint_cmds): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
(show_per_command_cmd): Remove.
* maint-test-settings.c (maintenance_set_test_settings_cmd):
Remove.
(maintenance_show_test_settings_cmd): Remove.
(_initialize_maint_test_settings): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* maint-test-options.c (maintenance_test_options_command):
Remove.
(_initialize_maint_test_options): Use add_basic_prefix_cmd.
* macrocmd.c (macro_command): Remove
(_initialize_macrocmd): Use add_basic_prefix_cmd.
* language.c (set_check, show_check): Remove.
(_initialize_language): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* infcmd.c (unset_command): Remove.
(_initialize_infcmd): Use add_basic_prefix_cmd.
* i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Remove.
(_initialize_i386_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* go32-nat.c (go32_info_dos_command): Remove.
(_initialize_go32_nat): Use add_basic_prefix_cmd.
* cli/cli-decode.c (do_prefix_cmd, add_basic_prefix_cmd)
(do_show_prefix_cmd, add_show_prefix_cmd): New functions.
* frame.c (set_backtrace_cmd, show_backtrace_cmd): Remove.
(_initialize_frame): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* dcache.c (set_dcache_command, show_dcache_command): Remove.
(_initialize_dcache): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* cp-support.c (maint_cplus_command): Remove.
(_initialize_cp_support): Use add_basic_prefix_cmd.
* btrace.c (maint_btrace_cmd, maint_btrace_set_cmd)
(maint_btrace_show_cmd, maint_btrace_pt_set_cmd)
(maint_btrace_pt_show_cmd, _initialize_btrace): Use
add_basic_prefix_cmd, add_show_prefix_cmd.
* breakpoint.c (save_command): Remove.
(_initialize_breakpoint): Use add_basic_prefix_cmd.
* arm-tdep.c (set_arm_command, show_arm_command): Remove.
(_initialize_arm_tdep): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* ada-lang.c (maint_set_ada_cmd, maint_show_ada_cmd)
(set_ada_command, show_ada_command): Remove.
(_initialize_ada_language): Use add_basic_prefix_cmd,
add_show_prefix_cmd.
* command.h (add_basic_prefix_cmd, add_show_prefix_cmd): Declare.
gdb/testsuite/ChangeLog
2020-04-17 Tom Tromey <tromey@adacore.com>
* gdb.cp/maint.exp (test_help): Simplify multiple_help_body.
Update tests.
* gdb.btrace/cpu.exp: Update tests.
* gdb.base/maint.exp: Update tests.
* gdb.base/default.exp: Update tests.
* gdb.base/completion.exp: Update tests.
|
|
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This adds the ability to change the color of the TUI borders, both
ordinary and active. Unlike other styling options, this doesn't allow
setting the intensity, because that is already done by the TUI in a
different way.
gdb/ChangeLog
2019-12-01 Tom Tromey <tom@tromey.com>
* NEWS: Document new settings.
* tui/tui-wingeneral.c (box_win): Apply appropriate border style.
* tui/tui-win.c (_initialize_tui_win): Add border style
observers.
* tui/tui-io.h (tui_apply_style): Declare.
* tui/tui-io.c (tui_apply_style): Rename from apply_style. No
longer static.
(apply_ansi_escape, tui_set_reverse_mode): Update.
* cli/cli-style.h (class cli_style_option) <add_setshow_commands>:
Add "skip_intensity" parameter.
<changed>: New member.
<do_set_value>: Declare.
(tui_border_style, tui_active_border_style): Declare.
* cli/cli-style.c (tui_border_style, tui_active_border_style): New
globals.
(cli_style_option): Initialize "changed".
(cli_style_option::do_set_value): New function.
(cli_style_option::add_setshow_commands): Add "skip_intensity"
parameter. Update.
(STYLE_ADD_SETSHOW_COMMANDS): Add "SKIP" parameter.
(_initialize_cli_style): Update. Create TUI border style
commands.
gdb/doc/ChangeLog
2019-12-01 Tom Tromey <tom@tromey.com>
* gdb.texinfo (TUI Configuration): Mention TUI border styles.
(Output Styling): Document new settings.
Change-Id: Id13e2af0af2a0bde61282752f2c379db3220c9fc
|
|
I noticed that cli_style_option declares a constructor that is never
defined. This removes it.
gdb/ChangeLog
2019-11-10 Tom Tromey <tom@tromey.com>
* cli/cli-style.h (class cli_style_option) <cli_style_option>:
Remove unused declaration.
Change-Id: Ic59ec7eab4d7183d9392b58709354b2d4449b7be
|
|
This introduces a new "metadata" style and changes many places in gdb
to use it. The idea here is to let the user distinguish gdb output
from output that (conceptually at least) comes directly from the
inferior. The newly-styled category includes text that gdb
traditionally surrounds in "<...>", like "<unavailable>".
I only added a single test for this. In many cases this output is
difficult to test. Also, while developing this errors in the
implementation of the new printf formats showed up as regressions.
gdb/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* p-lang.c (pascal_printstr): Use metadata style.
* value.c (show_convenience): Use metadata style.
* valprint.c (valprint_check_validity, val_print_optimized_out)
(val_print_not_saved, val_print_unavailable)
(val_print_invalid_address, generic_val_print, val_print)
(value_check_printable, val_print_array_elements): Use metadata
style.
* ui-out.h (class ui_out) <field_fmt>: New overload.
<do_field_fmt>: Add style parameter.
* ui-out.c (ui_out::field_fmt): New overload.
* typeprint.c (type_print_unknown_return_type)
(val_print_not_allocated, val_print_not_associated): Use metadata
style.
* tui/tui-out.h (class tui_ui_out) <do_field_fmt>: Add style
parameter.
* tui/tui-out.c (tui_ui_out::do_field_fmt): Update.
* tracepoint.c (tvariables_info_1): Use metadata style.
* stack.c (print_frame_arg, print_frame_info, print_frame)
(info_frame_command_core): Use metadata style.
* skip.c (info_skip_command): Use metadata style.
* rust-lang.c (rust_print_enum): Use metadata style.
* python/py-prettyprint.c (print_stack_unless_memory_error): Use
metadata style.
* python/py-framefilter.c (py_print_single_arg): Use metadata
style.
* printcmd.c (do_one_display, print_variable_and_value): Use
metadata style.
* p-valprint.c (pascal_val_print)
(pascal_object_print_value_fields): Use metadata style.
* p-typeprint.c (pascal_type_print_base): Use metadata style.
* mi/mi-out.h (class mi_ui_out) <do_field_fmt>: Add style
parameter.
* mi/mi-out.c (mi_ui_out::do_field_fmt): Update.
* m2-valprint.c (m2_print_long_set): Use metadata style.
* m2-typeprint.c (m2_print_type): Use metadata style.
* infcmd.c (print_return_value_1): Use metadata style.
* gnu-v3-abi.c (print_one_vtable): Use metadata style.
* f-valprint.c (info_common_command_for_block): Use metadata
style.
* f-typeprint.c (f_type_print_base): Use metadata style.
* expprint.c (print_subexp_standard): Use metadata style.
* cp-valprint.c (cp_print_value_fields): Use metadata style.
* cli/cli-style.h (class cli_style_option): Add constructor.
(metadata_style): Declare.
* cli/cli-style.c (metadata_style): New global.
(_initialize_cli_style): Register metadata style.
* cli-out.h (class cli_ui_out) <do_field_fmt>: Add style
parameter.
* cli-out.c (cli_ui_out::do_field_fmt): Update.
* c-typeprint.c (c_type_print_base_struct_union)
(c_type_print_base_1): Use metadata style.
* breakpoint.c (watchpoint_value_print)
(print_one_breakpoint_location): Use metadata style.
* break-catch-syscall.c (print_one_catch_syscall): Use metadata
style.
* break-catch-sig.c (signal_catchpoint_print_one): Use metadata
style.
* ada-valprint.c (val_print_packed_array_elements, printstr)
(print_field_values, ada_val_print_ref, ada_val_print): Use
metadata style.
* ada-typeprint.c (print_array_type, ada_print_type): Use metadata
style.
* ada-tasks.c (print_ada_task_info, info_task): Use metadata
style.
* ada-lang.c (user_select_syms): Use metadata style.
gdb/testsuite/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* lib/gdb-utils.exp (style): Handle "metadata" argument.
* gdb.base/style.exp: Add metadata style test.
|
|
This is for add_setshow_boolean_cmd as well as the gdb::option interface.
gdb/ChangeLog:
2019-09-17 Christian Biesinger <cbiesinger@google.com>
* ada-lang.c (ada_ignore_descriptive_types_p): Change to bool.
(print_signatures): Likewise.
(trust_pad_over_xvs): Likewise.
* arch/aarch64-insn.c (aarch64_debug): Likewise.
* arch/aarch64-insn.h (aarch64_debug): Likewise.
* arm-linux-nat.c (arm_apcs_32): Likewise.
* arm-linux-tdep.c (arm_apcs_32): Likewise.
* arm-nbsd-nat.c (arm_apcs_32): Likewise.
* arm-tdep.c (arm_debug): Likewise.
(arm_apcs_32): Likewise.
* auto-load.c (debug_auto_load): Likewise.
(auto_load_gdb_scripts): Likewise.
(global_auto_load): Likewise.
(auto_load_local_gdbinit): Likewise.
(auto_load_local_gdbinit_loaded): Likewise.
* auto-load.h (global_auto_load): Likewise.
(auto_load_local_gdbinit): Likewise.
(auto_load_local_gdbinit_loaded): Likewise.
* breakpoint.c (disconnected_dprintf): Likewise.
(breakpoint_proceeded): Likewise.
(automatic_hardware_breakpoints): Likewise.
(always_inserted_mode): Likewise.
(target_exact_watchpoints): Likewise.
(_initialize_breakpoint): Update.
* breakpoint.h (target_exact_watchpoints): Change to bool.
* btrace.c (maint_btrace_pt_skip_pad): Likewise.
* cli/cli-cmds.c (trace_commands): Likewise.
* cli/cli-cmds.h (trace_commands): Likewise.
* cli/cli-decode.c (add_setshow_boolean_cmd): Change int* argument
to bool*.
* cli/cli-logging.c (logging_overwrite): Change to bool.
(logging_redirect): Likewise.
(debug_redirect): Likewise.
* cli/cli-option.h (option_def) <boolean>: Change return type to bool*.
(struct boolean_option_def) <get_var_address_cb_>: Change return type
to bool.
<boolean_option_def>: Update.
(struct flag_option_def): Change default type of Context to bool
from int.
<flag_option_def>: Change return type of var_address_cb_ to bool*.
* cli/cli-setshow.c (do_set_command): Cast to bool* instead of int*.
(get_setshow_command_value_string): Likewise.
* cli/cli-style.c (cli_styling): Change to bool.
(source_styling): Likewise.
* cli/cli-style.h (source_styling): Likewise.
(cli_styling): Likewise.
* cli/cli-utils.h (struct qcs_flags) <quiet, cont, silent>: Change
to bool.
* command.h (var_types): Update comment.
(add_setshow_boolean_cmd): Change int* var argument to bool*.
* compile/compile-cplus-types.c (debug_compile_cplus_types): Change to
bool.
(debug_compile_cplus_scopes): Likewise.
* compile/compile-internal.h (compile_debug): Likewise.
* compile/compile.c (compile_debug): Likewise.
(struct compile_options) <raw>: Likewise.
* cp-support.c (catch_demangler_crashes): Likewise.
* cris-tdep.c (usr_cmd_cris_version_valid): Likewise.
(usr_cmd_cris_dwarf2_cfi): Likewise.
* csky-tdep.c (csky_debug): Likewise.
* darwin-nat.c (enable_mach_exceptions): Likewise.
* dcache.c (dcache_enabled_p): Likewise.
* defs.h (info_verbose): Likewise.
* demangle.c (demangle): Likewise.
(asm_demangle): Likewise.
* dwarf-index-cache.c (debug_index_cache): Likewise.
* dwarf2-frame.c (dwarf2_frame_unwinders_enabled_p): Likewise.
* dwarf2-frame.h (dwarf2_frame_unwinders_enabled_p): Likewise.
* dwarf2read.c (check_physname): Likewise.
(use_deprecated_index_sections): Likewise.
(dwarf_always_disassemble): Likewise.
* eval.c (overload_resolution): Likewise.
* event-top.c (set_editing_cmd_var): Likewise.
(exec_done_display_p): Likewise.
* event-top.h (set_editing_cmd_var): Likewise.
(exec_done_display_p): Likewise.
* exec.c (write_files): Likewise.
* fbsd-nat.c (debug_fbsd_lwp): Likewise
(debug_fbsd_nat): Likewise.
* frame.h (struct frame_print_options) <print_raw_frame_arguments>:
Likewise.
(struct set_backtrace_options) <backtrace_past_main>: Likewise.
<backtrace_past_entry> Likewise.
* gdb-demangle.h (demangle): Likewise.
(asm_demangle): Likewise.
* gdb_bfd.c (bfd_sharing): Likewise.
* gdbcore.h (write_files): Likewise.
* gdbsupport/common-debug.c (show_debug_regs): Likewise.
* gdbsupport/common-debug.h (show_debug_regs): Likewise.
* gdbthread.h (print_thread_events): Likewise.
* gdbtypes.c (opaque_type_resolution): Likewise.
(strict_type_checking): Likewise.
* gnu-nat.c (gnu_debug_flag): Likewise.
* guile/scm-auto-load.c (auto_load_guile_scripts): Likewise.
* guile/scm-param.c (pascm_variable): Add boolval.
(add_setshow_generic): Update.
(pascm_param_value): Update.
(pascm_set_param_value_x): Update.
* hppa-tdep.c (hppa_debug): Change to bool..
* infcall.c (may_call_functions_p): Likewise.
(coerce_float_to_double_p): Likewise.
(unwind_on_signal_p): Likewise.
(unwind_on_terminating_exception_p): Likewise.
* infcmd.c (startup_with_shell): Likewise.
* inferior.c (print_inferior_events): Likewise.
* inferior.h (startup_with_shell): Likewise.
(print_inferior_events): Likewise.
* infrun.c (step_stop_if_no_debug): Likewise.
(detach_fork): Likewise.
(debug_displaced): Likewise.
(disable_randomization): Likewise.
(non_stop): Likewise.
(non_stop_1): Likewise.
(observer_mode): Likewise.
(observer_mode_1): Likewise.
(set_observer_mode): Update.
(sched_multi): Change to bool.
* infrun.h (debug_displaced): Likewise.
(sched_multi): Likewise.
(step_stop_if_no_debug): Likewise.
(non_stop): Likewise.
(disable_randomization): Likewise.
* linux-tdep.c (use_coredump_filter): Likewise.
(dump_excluded_mappings): Likewise.
* linux-thread-db.c (auto_load_thread_db): Likewise.
(check_thread_db_on_load): Likewise.
* main.c (captured_main_1): Update.
* maint-test-options.c (struct test_options_opts) <flag_opt, xx1_opt,
xx2_opt, boolean_opt>: Change to bool.
* maint-test-settings.c (maintenance_test_settings_boolean): Likewise.
* maint.c (maintenance_profile_p): Likewise.
(per_command_time): Likewise.
(per_command_space): Likewise.
(per_command_symtab): Likewise.
* memattr.c (inaccessible_by_default): Likewise.
* mi/mi-main.c (mi_async): Likewise.
(mi_async_1): Likewise.
* mips-tdep.c (mips64_transfers_32bit_regs_p): Likewise.
* nat/fork-inferior.h (startup_with_shell): Likewise.
* nat/linux-namespaces.c (debug_linux_namespaces): Likewise.
* nat/linux-namespaces.h (debug_linux_namespaces): Likewise.
* nios2-tdep.c (nios2_debug): Likewise.
* or1k-tdep.c (or1k_debug): Likewise.
* parse.c (parser_debug): Likewise.
* parser-defs.h (parser_debug): Likewise.
* printcmd.c (print_symbol_filename): Likewise.
* proc-api.c (procfs_trace): Likewise.
* python/py-auto-load.c (auto_load_python_scripts): Likewise.
* python/py-param.c (union parmpy_variable): Add "bool boolval" field.
(set_parameter_value): Update.
(add_setshow_generic): Update.
* python/py-value.c (copy_py_bool_obj): Change argument from int*
to bool*.
* python/python.c (gdbpy_parameter_value): Cast to bool* instead of
int*.
* ravenscar-thread.c (ravenscar_task_support): Change to bool.
* record-btrace.c (record_btrace_target::store_registers): Update.
* record-full.c (record_full_memory_query): Change to bool.
(record_full_stop_at_limit): Likewise.
* record-full.h (record_full_memory_query): Likewise.
* remote-notif.c (notif_debug): Likewise.
* remote-notif.h (notif_debug): Likewise.
* remote.c (use_range_stepping): Likewise.
(interrupt_on_connect): Likewise.
(remote_break): Likewise.
* ser-tcp.c (tcp_auto_retry): Likewise.
* ser-unix.c (serial_hwflow): Likewise.
* skip.c (debug_skip): Likewise.
* solib-aix.c (solib_aix_debug): Likewise.
* spu-tdep.c (spu_stop_on_load_p): Likewise.
(spu_auto_flush_cache_p): Likewise.
* stack.c (struct backtrace_cmd_options) <full, no_filters, hide>:
Likewise.
(struct info_print_options) <quiet>: Likewise.
* symfile-debug.c (debug_symfile): Likewise.
* symfile.c (auto_solib_add): Likewise.
(separate_debug_file_debug): Likewise.
* symfile.h (auto_solib_add): Likewise.
(separate_debug_file_debug): Likewise.
* symtab.c (basenames_may_differ): Likewise.
(struct filename_partial_match_opts) <dirname, basename>: Likewise.
(struct info_print_options) <quiet, exclude_minsyms>: Likewise.
(struct info_types_options) <quiet>: Likewise.
* symtab.h (demangle): Likewise.
(basenames_may_differ): Likewise.
* target-dcache.c (stack_cache_enabled_1): Likewise.
(code_cache_enabled_1): Likewise.
* target.c (trust_readonly): Likewise.
(may_write_registers): Likewise.
(may_write_memory): Likewise.
(may_insert_breakpoints): Likewise.
(may_insert_tracepoints): Likewise.
(may_insert_fast_tracepoints): Likewise.
(may_stop): Likewise.
(auto_connect_native_target): Likewise.
(target_stop_and_wait): Update.
(target_async_permitted): Change to bool.
(target_async_permitted_1): Likewise.
(may_write_registers_1): Likewise.
(may_write_memory_1): Likewise.
(may_insert_breakpoints_1): Likewise.
(may_insert_tracepoints_1): Likewise.
(may_insert_fast_tracepoints_1): Likewise.
(may_stop_1): Likewise.
* target.h (target_async_permitted): Likewise.
(may_write_registers): Likewise.
(may_write_memory): Likewise.
(may_insert_breakpoints): Likewise.
(may_insert_tracepoints): Likewise.
(may_insert_fast_tracepoints): Likewise.
(may_stop): Likewise.
* thread.c (struct info_threads_opts) <show_global_ids>: Likewise.
(make_thread_apply_all_options_def_group): Change argument from int*
to bool*.
(thread_apply_all_command): Update.
(print_thread_events): Change to bool.
* top.c (confirm): Likewise.
(command_editing_p): Likewise.
(history_expansion_p): Likewise.
(write_history_p): Likewise.
(info_verbose): Likewise.
* top.h (confirm): Likewise.
(history_expansion_p): Likewise.
* tracepoint.c (disconnected_tracing): Likewise.
(circular_trace_buffer): Likewise.
* typeprint.c (print_methods): Likewise.
(print_typedefs): Likewise.
* utils.c (debug_timestamp): Likewise.
(sevenbit_strings): Likewise.
(pagination_enabled): Likewise.
* utils.h (sevenbit_strings): Likewise.
(pagination_enabled): Likewise.
* valops.c (overload_resolution): Likewise.
* valprint.h (struct value_print_options) <prettyformat_arrays,
prettyformat_structs, vtblprint, unionprint, addressprint, objectprint,
stop_print_at_null, print_array_indexes, deref_ref, static_field_print,
pascal_static_field_print, raw, summary, symbol_print, finish_print>:
Likewise.
* windows-nat.c (new_console): Likewise.
(cygwin_exceptions): Likewise.
(new_group): Likewise.
(debug_exec): Likewise.
(debug_events): Likewise.
(debug_memory): Likewise.
(debug_exceptions): Likewise.
(useshell): Likewise.
* windows-tdep.c (maint_display_all_tib): Likewise.
* xml-support.c (debug_xml): Likewise.
|
|
I touched symtab.h and was surprised to see how many files were
rebuilt. I looked into it a bit, and found that defs.h includes
gdbarch.h, which in turn includes many things.
gdbarch.h is only needed by a minority ofthe files in gdb, so this
patch removes the include from defs.h and updates the fallout.
I did "wc -l" on the files in build/gdb/.deps; this patch reduces the
line count from 139935 to 137030; so there are definitely future
build-time savings here.
Note that while I configured with --enable-targets=all, it's possible
that some *-nat.c file needs an update. I could not test all of
these. The buildbot caught a few problems along these lines.
gdb/ChangeLog
2019-07-10 Tom Tromey <tom@tromey.com>
* defs.h: Don't include gdbarch.h.
* aarch64-ravenscar-thread.c, aarch64-tdep.c, alpha-bsd-tdep.h,
alpha-linux-tdep.c, alpha-mdebug-tdep.c, arch-utils.h, arm-tdep.h,
ax-general.c, btrace.c, buildsym-legacy.c, buildsym.h, c-lang.c,
cli/cli-decode.h, cli/cli-dump.c, cli/cli-script.h,
cli/cli-style.h, coff-pe-read.h, compile/compile-c-support.c,
compile/compile-cplus.h, compile/compile-loc2c.c, corefile.c,
cp-valprint.c, cris-linux-tdep.c, ctf.c, d-lang.c, d-namespace.c,
dcache.c, dicos-tdep.c, dictionary.c, disasm-selftests.c,
dummy-frame.c, dummy-frame.h, dwarf2-frame-tailcall.c,
dwarf2expr.c, expression.h, f-lang.c, frame-base.c,
frame-unwind.c, frv-linux-tdep.c, gdbarch-selftests.c, gdbtypes.h,
go-lang.c, hppa-nbsd-tdep.c, hppa-obsd-tdep.c, i386-dicos-tdep.c,
i386-tdep.h, ia64-vms-tdep.c, interps.h, language.c,
linux-record.c, location.h, m2-lang.c, m32r-linux-tdep.c,
mem-break.c, memattr.c, mn10300-linux-tdep.c, nios2-linux-tdep.c,
objfiles.h, opencl-lang.c, or1k-linux-tdep.c, p-lang.c,
parser-defs.h, ppc-tdep.h, probe.h, python/py-record-btrace.c,
record-btrace.c, record.h, regcache-dump.c, regcache.h,
riscv-fbsd-tdep.c, riscv-linux-tdep.c, rust-exp.y,
sh-linux-tdep.c, sh-nbsd-tdep.c, source-cache.c,
sparc-nbsd-tdep.c, sparc-obsd-tdep.c, sparc-ravenscar-thread.c,
sparc64-fbsd-tdep.c, std-regs.c, target-descriptions.h,
target-float.c, tic6x-linux-tdep.c, tilegx-linux-tdep.c, top.c,
tracefile.c, trad-frame.c, type-stack.h, ui-style.c, utils.c,
utils.h, valarith.c, valprint.c, varobj.c, x86-tdep.c,
xml-support.h, xtensa-linux-tdep.c, cli/cli-cmds.h: Update.
* s390-linux-nat.c, procfs.c, inf-ptrace.c: Likewise.
|
|
Have 'show style' and its subcommands using a style to style its output.
This allows the GDB user or developer to use 'show style' to visually see
with one command how all the current styles look like.
Add 2 new styles highlight style, title style and fputs_highlighted function.
Highlight style is used by fputs_highlighted to highlight the parts of
its char *STR argument that match a HIGHLIGHT regexp.
This (and the title style) will be used in a following patch.
|
|
This adds "set style source" (and "show style source") commands. This
gives the user control over whether source code is highlighted.
gdb/ChangeLog
2019-03-14 Tom Tromey <tromey@adacore.com>
* NEWS: Add item for "style sources" commands.
* source-cache.c (source_cache::get_source_lines): Check
source_styling.
* cli/cli-style.c (source_styling): New global.
(_initialize_cli_style): Add "style sources" commands.
(show_style_sources): New function.
* cli/cli-style.h (source_styling): Declare.
gdb/doc/ChangeLog
2019-03-14 Tom Tromey <tromey@adacore.com>
* gdb.texinfo (Output Styling): Document "set style source" and
"show style source".
gdb/testsuite/ChangeLog
2019-03-14 Tom Tromey <tromey@adacore.com>
* gdb.base/style.exp: Add "set style sources" test.
|
|
While working on my other scripts to deal with gdb headers, I noticed
that some files were missing include guards. I wrote a script to add
the missing ones, but found that using the obvious names for the
guards ran into clashes -- for example, gdb/nat/linux-nat.h used
"LINUX_NAT_H", but this was also the script's choice for
gdb/linux-nat.h.
So, I changed the script to normalize all include guards in gdb. This
patch is the result.
As usual the script is available here:
https://github.com/tromey/gdb-refactoring-scripts
Tested by rebuilding; I also ran it through "Fedora-x86_64-m64" on the
buildbot.
gdb/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* yy-remap.h: Add include guard.
* xtensa-tdep.h: Add include guard.
* xcoffread.h: Rename include guard.
* varobj-iter.h: Add include guard.
* tui/tui.h: Rename include guard.
* tui/tui-winsource.h: Rename include guard.
* tui/tui-wingeneral.h: Rename include guard.
* tui/tui-windata.h: Rename include guard.
* tui/tui-win.h: Rename include guard.
* tui/tui-stack.h: Rename include guard.
* tui/tui-source.h: Rename include guard.
* tui/tui-regs.h: Rename include guard.
* tui/tui-out.h: Rename include guard.
* tui/tui-layout.h: Rename include guard.
* tui/tui-io.h: Rename include guard.
* tui/tui-hooks.h: Rename include guard.
* tui/tui-file.h: Rename include guard.
* tui/tui-disasm.h: Rename include guard.
* tui/tui-data.h: Rename include guard.
* tui/tui-command.h: Rename include guard.
* tic6x-tdep.h: Add include guard.
* target/waitstatus.h: Rename include guard.
* target/wait.h: Rename include guard.
* target/target.h: Rename include guard.
* target/resume.h: Rename include guard.
* target-float.h: Rename include guard.
* stabsread.h: Add include guard.
* rs6000-tdep.h: Add include guard.
* riscv-fbsd-tdep.h: Add include guard.
* regformats/regdef.h: Rename include guard.
* record.h: Rename include guard.
* python/python.h: Rename include guard.
* python/python-internal.h: Rename include guard.
* python/py-stopevent.h: Rename include guard.
* python/py-ref.h: Rename include guard.
* python/py-record.h: Rename include guard.
* python/py-record-full.h: Rename include guard.
* python/py-record-btrace.h: Rename include guard.
* python/py-instruction.h: Rename include guard.
* python/py-events.h: Rename include guard.
* python/py-event.h: Rename include guard.
* procfs.h: Add include guard.
* proc-utils.h: Add include guard.
* p-lang.h: Add include guard.
* or1k-tdep.h: Rename include guard.
* observable.h: Rename include guard.
* nto-tdep.h: Rename include guard.
* nat/x86-linux.h: Rename include guard.
* nat/x86-linux-dregs.h: Rename include guard.
* nat/x86-gcc-cpuid.h: Add include guard.
* nat/x86-dregs.h: Rename include guard.
* nat/x86-cpuid.h: Rename include guard.
* nat/ppc-linux.h: Rename include guard.
* nat/mips-linux-watch.h: Rename include guard.
* nat/linux-waitpid.h: Rename include guard.
* nat/linux-ptrace.h: Rename include guard.
* nat/linux-procfs.h: Rename include guard.
* nat/linux-osdata.h: Rename include guard.
* nat/linux-nat.h: Rename include guard.
* nat/linux-namespaces.h: Rename include guard.
* nat/linux-btrace.h: Rename include guard.
* nat/glibc_thread_db.h: Rename include guard.
* nat/gdb_thread_db.h: Rename include guard.
* nat/gdb_ptrace.h: Rename include guard.
* nat/fork-inferior.h: Rename include guard.
* nat/amd64-linux-siginfo.h: Rename include guard.
* nat/aarch64-sve-linux-sigcontext.h: Rename include guard.
* nat/aarch64-sve-linux-ptrace.h: Rename include guard.
* nat/aarch64-linux.h: Rename include guard.
* nat/aarch64-linux-hw-point.h: Rename include guard.
* mn10300-tdep.h: Add include guard.
* mips-linux-tdep.h: Add include guard.
* mi/mi-parse.h: Rename include guard.
* mi/mi-out.h: Rename include guard.
* mi/mi-main.h: Rename include guard.
* mi/mi-interp.h: Rename include guard.
* mi/mi-getopt.h: Rename include guard.
* mi/mi-console.h: Rename include guard.
* mi/mi-common.h: Rename include guard.
* mi/mi-cmds.h: Rename include guard.
* mi/mi-cmd-break.h: Rename include guard.
* m2-lang.h: Add include guard.
* location.h: Rename include guard.
* linux-record.h: Rename include guard.
* linux-nat.h: Add include guard.
* linux-fork.h: Add include guard.
* i386-darwin-tdep.h: Rename include guard.
* hppa-linux-offsets.h: Add include guard.
* guile/guile.h: Rename include guard.
* guile/guile-internal.h: Rename include guard.
* gnu-nat.h: Rename include guard.
* gdb-stabs.h: Rename include guard.
* frv-tdep.h: Add include guard.
* f-lang.h: Add include guard.
* event-loop.h: Add include guard.
* darwin-nat.h: Rename include guard.
* cp-abi.h: Rename include guard.
* config/sparc/nm-sol2.h: Rename include guard.
* config/nm-nto.h: Rename include guard.
* config/nm-linux.h: Add include guard.
* config/i386/nm-i386gnu.h: Rename include guard.
* config/djgpp/nl_types.h: Rename include guard.
* config/djgpp/langinfo.h: Rename include guard.
* compile/gcc-cp-plugin.h: Add include guard.
* compile/gcc-c-plugin.h: Add include guard.
* compile/compile.h: Rename include guard.
* compile/compile-object-run.h: Rename include guard.
* compile/compile-object-load.h: Rename include guard.
* compile/compile-internal.h: Rename include guard.
* compile/compile-cplus.h: Rename include guard.
* compile/compile-c.h: Rename include guard.
* common/xml-utils.h: Rename include guard.
* common/x86-xstate.h: Rename include guard.
* common/version.h: Rename include guard.
* common/vec.h: Rename include guard.
* common/tdesc.h: Rename include guard.
* common/selftest.h: Rename include guard.
* common/scoped_restore.h: Rename include guard.
* common/scoped_mmap.h: Rename include guard.
* common/scoped_fd.h: Rename include guard.
* common/safe-iterator.h: Rename include guard.
* common/run-time-clock.h: Rename include guard.
* common/refcounted-object.h: Rename include guard.
* common/queue.h: Rename include guard.
* common/ptid.h: Rename include guard.
* common/print-utils.h: Rename include guard.
* common/preprocessor.h: Rename include guard.
* common/pathstuff.h: Rename include guard.
* common/observable.h: Rename include guard.
* common/netstuff.h: Rename include guard.
* common/job-control.h: Rename include guard.
* common/host-defs.h: Rename include guard.
* common/gdb_wait.h: Rename include guard.
* common/gdb_vecs.h: Rename include guard.
* common/gdb_unlinker.h: Rename include guard.
* common/gdb_unique_ptr.h: Rename include guard.
* common/gdb_tilde_expand.h: Rename include guard.
* common/gdb_sys_time.h: Rename include guard.
* common/gdb_string_view.h: Rename include guard.
* common/gdb_splay_tree.h: Rename include guard.
* common/gdb_setjmp.h: Rename include guard.
* common/gdb_ref_ptr.h: Rename include guard.
* common/gdb_optional.h: Rename include guard.
* common/gdb_locale.h: Rename include guard.
* common/gdb_assert.h: Rename include guard.
* common/filtered-iterator.h: Rename include guard.
* common/filestuff.h: Rename include guard.
* common/fileio.h: Rename include guard.
* common/environ.h: Rename include guard.
* common/common-utils.h: Rename include guard.
* common/common-types.h: Rename include guard.
* common/common-regcache.h: Rename include guard.
* common/common-inferior.h: Rename include guard.
* common/common-gdbthread.h: Rename include guard.
* common/common-exceptions.h: Rename include guard.
* common/common-defs.h: Rename include guard.
* common/common-debug.h: Rename include guard.
* common/cleanups.h: Rename include guard.
* common/buffer.h: Rename include guard.
* common/btrace-common.h: Rename include guard.
* common/break-common.h: Rename include guard.
* cli/cli-utils.h: Rename include guard.
* cli/cli-style.h: Rename include guard.
* cli/cli-setshow.h: Rename include guard.
* cli/cli-script.h: Rename include guard.
* cli/cli-interp.h: Rename include guard.
* cli/cli-decode.h: Rename include guard.
* cli/cli-cmds.h: Rename include guard.
* charset-list.h: Add include guard.
* buildsym-legacy.h: Rename include guard.
* bfin-tdep.h: Add include guard.
* ax.h: Rename include guard.
* arm-linux-tdep.h: Add include guard.
* arm-fbsd-tdep.h: Add include guard.
* arch/xtensa.h: Rename include guard.
* arch/tic6x.h: Add include guard.
* arch/i386.h: Add include guard.
* arch/arm.h: Rename include guard.
* arch/arm-linux.h: Rename include guard.
* arch/arm-get-next-pcs.h: Rename include guard.
* arch/amd64.h: Add include guard.
* arch/aarch64-insn.h: Rename include guard.
* arch-utils.h: Rename include guard.
* annotate.h: Add include guard.
* amd64-darwin-tdep.h: Rename include guard.
* aarch64-linux-tdep.h: Add include guard.
* aarch64-fbsd-tdep.h: Add include guard.
* aarch32-linux-nat.h: Add include guard.
gdb/gdbserver/ChangeLog
2019-02-07 Tom Tromey <tom@tromey.com>
* x86-tdesc.h: Rename include guard.
* x86-low.h: Add include guard.
* wincecompat.h: Rename include guard.
* win32-low.h: Add include guard.
* utils.h: Rename include guard.
* tracepoint.h: Rename include guard.
* tdesc.h: Rename include guard.
* target.h: Rename include guard.
* server.h: Rename include guard.
* remote-utils.h: Rename include guard.
* regcache.h: Rename include guard.
* nto-low.h: Rename include guard.
* notif.h: Add include guard.
* mem-break.h: Rename include guard.
* lynx-low.h: Add include guard.
* linux-x86-tdesc.h: Add include guard.
* linux-s390-tdesc.h: Add include guard.
* linux-ppc-tdesc-init.h: Add include guard.
* linux-low.h: Add include guard.
* linux-aarch64-tdesc.h: Add include guard.
* linux-aarch32-low.h: Add include guard.
* inferiors.h: Rename include guard.
* i387-fp.h: Rename include guard.
* hostio.h: Rename include guard.
* gdbthread.h: Rename include guard.
* gdb_proc_service.h: Rename include guard.
* event-loop.h: Rename include guard.
* dll.h: Rename include guard.
* debug.h: Rename include guard.
* ax.h: Rename include guard.
|
|
Currently, the behaviour is:
(gdb) show style
(gdb) set style
(gdb) show style address
(gdb) set style address
(gdb)
With this patch, the behaviour is:
(gdb) show style
style address background: The "address" background color is: none
style address foreground: The "address" foreground color is: blue
style address intensity: The "address" display intensity is: normal
enabled: CLI output styling is enabled.
style filename background: The "filename" background color is: none
style filename foreground: The "filename" foreground color is: green
style filename intensity: The "filename" display intensity is: normal
style function background: The "function" background color is: none
style function foreground: The "function" foreground color is: yellow
style function intensity: The "function" display intensity is: normal
style variable background: The "variable" background color is: none
style variable foreground: The "variable" foreground color is: cyan
style variable intensity: The "variable" display intensity is: normal
(gdb) set style
"set style" must be followed by an appropriate subcommand.
List of set style subcommands:
set style address -- Address display styling
set style enabled -- Set whether CLI styling is enabled
set style filename -- Filename display styling
set style function -- Function name display styling
set style variable -- Variable name display styling
Type "help set style" followed by set style subcommand name for full documentation.
Type "apropos word" to search for commands related to "word".
Command name abbreviations are allowed if unambiguous.
(gdb) show style address
background: The "filename" background color is: none
foreground: The "filename" foreground color is: green
intensity: The "filename" display intensity is: normal
(gdb) set style address
List of set style address subcommands:
set style address background -- Set the background color for this property
set style address foreground -- Set the foreground color for this property
set style address intensity -- Set the display intensity color for this property
Type "help set style address" followed by set style address subcommand name for full documentation.
Type "apropos word" to search for commands related to "word".
Command name abbreviations are allowed if unambiguous.
(gdb)
gdb/ChangeLog
* cli/cli-style.h (class cli_style_option): <add_setshow_commands>
Remove arg prefixname, add do_set and do_show.
Add member functions set_list and show_list.
* cli/cli-style.c (class cli_style_option): Update accordingly.
(style_set_list): Move to file scope.
(style_show_list): Likewise.
(set_style): Call help_list.
(show_style): Call cmd_show_list.
(_initialize_cli_style): New macro STYLE_ADD_SETSHOW_COMMANDS.
Update to use the new macro.
|
|
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
|
|
This changes gdb to style addresses.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* ui-out.h (enum class ui_out_style_kind) <ADDRESS>: New
constant.
* ui-out.c (ui_out::field_core_addr): Add styling.
* stack.c (print_frame): Add styling.
* printcmd.c (print_address): Add styling.
(print_address_demangle, info_address_command): Likewise.
* cli/cli-style.h (address_style): Declare.
* cli/cli-style.c (address_style): New global.
(_initialize_cli_style): Register new commands.
* cli-out.c (cli_ui_out::do_field_string): Update.
gdb/testsuite/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Update test to check for address styling.
|
|
This adds style support for variable names. For the time being, this
is only done in backtraces, not in ptype or print; those places do not
use ui-out and so would need ad hoc changes.
This also adds styling to the names printed for local variables in
"backtrace full". This code does not use ui-out, so the styling is
done using the low-level API.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* ui-out.h (enum class ui_out_style_kind) <VARIABLE>: New global.
* stack.c (print_frame_arg): Style name.
* printcmd.c (print_variable_and_value): Style variable name.
* cli/cli-style.h (variable_name_style): Declare.
* cli/cli-style.c (variable_name_style): New global.
(_initialize_cli_style): Update.
* cli-out.c (cli_ui_out::do_field_string): Update.
gdb/testsuite/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Add test for variable names.
|
|
This adds some output styling to the CLI.
A style is currently a foreground color, a background color, and an
intensity (dim or bold). (This list could be expanded depending on
terminal capabilities.)
A style can be applied while printing. For ui-out, this is done by
passing the style constant as an argument. For low-level cases,
fprintf_styled and fputs_styled are provided.
Users can control the style via a number of new set/show commands. In
the interest of not typing many nearly-identical documentation
strings, I automated this. On the down side, this is not very
i18n-friendly.
I've chose some default colors to use. I think it would be good to
enable this by default, so that when users start the new gdb, they
will see the new feature.
Stylizing is done if TERM is set and is not "dumb". This could be
improved when the TUI is available by using the curses has_colors
call. That is, the lowest layer could call this without committing to
using curses everywhere; see my other patch for TUI colorizing.
I considered adding a new "set_style" method to ui_file. However,
because the implementation had to interact with the pager code, I
didn't take this approach. But, one idea might be to put the isatty
check there and then have it defer to the lower layers.
gdb/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* utils.h (set_output_style, fprintf_styled)
(fputs_styled): Declare.
* utils.c (applied_style, desired_style): New globals.
(emit_style_escape, set_output_style): New function.
(prompt_for_continue): Emit style escapes.
(fputs_maybe_filtered): Likewise.
(fputs_styled, fprintf_styled): New functions.
* ui-out.h (enum class ui_out_style_kind): New.
(class ui_out) <field_string, field_stream, do_field_string>: Add
style parameter.
* ui-out.c (ui_out::field_stream, ui_out::field_string): Add style
parameter.
* tui/tui-out.h (class tui_ui_out) <do_field_string>: Add style
parameter.
* tui/tui-out.c (tui_ui_out::do_field_string): Add style
parameter.
(tui_ui_out::do_field_string): Update.
* tracepoint.c (print_one_static_tracepoint_marker): Style
output.
* stack.c (print_frame_info, print_frame): Style output.
* source.c (print_source_lines_base): Style output.
* skip.c (info_skip_command): Style output.
* record-btrace.c (btrace_call_history_src_line): Style output.
(btrace_call_history): Likewise.
* python/py-framefilter.c (py_print_frame): Style output.
* mi/mi-out.h (class mi_ui_out) <do_field_string>: Add style
parameter.
* mi/mi-out.c (mi_ui_out::do_table_header)
(mi_ui_out::do_field_int): Update.
(mi_ui_out::do_field_string): Update.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Style output.
* cli/cli-style.h: New file.
* cli/cli-style.c: New file.
* cli-out.h (class cli_ui_out) <do_field_string>: Add style
parameter.
* cli-out.c (cli_ui_out::do_table_header)
(cli_ui_out::do_field_int, cli_ui_out::do_field_skip): Update.
(cli_ui_out::do_field_string): Add style parameter. Style the
output.
* breakpoint.c (print_breakpoint_location): Style output.
(update_static_tracepoint): Likewise.
* Makefile.in (SUBDIR_CLI_SRCS): Add cli-style.c.
(HFILES_NO_SRCDIR): Add cli-style.h.
gdb/testsuite/ChangeLog
2018-12-28 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: New file.
* gdb.base/style.c: New file.
|
