| Age | Commit message (Collapse) | Author | Files | Lines | |
|---|---|---|---|---|---|
| 2021-06-19 | gdb/gdbserver: switch to AC_CONFIG_MACRO_DIRS | Mike Frysinger | 1 | -37/+10 | |
| These dirs don't use automake, so use AC_CONFIG_MACRO_DIRS to specify ../config as a search dir for m4 macros. This allows removal of a lot of hand-written m4_include's from acinclude.m4 files, and simplifies use of `aclocal` or `autoreconf` as manual -I is not needed. | |||||
| 2020-11-28 | GDB: Fix detection of ELF support when configuring with ↵ | Alex Richardson | 1 | -0/+1 | |
| -Werror=implicit-function-declaration I am getting I'm sorry, Dave, I can't do that. Symbol format `elf64-littleriscv' unknown. errors after updating from GDB 8.3 to 10. Bisecting showed that since commit 1ff6de031241 ("bfd, ld: add CTF section linking"), bfd.h depends on strncmp() being present, so configuring with -Werror=implicit-function-declaration results in the check for ELF support in BFD failing: .../gdb/gdb/../bfd/elf-bfd.h: In function 'bfd_section_is_ctf': .../gdb/gdb/../bfd/elf-bfd.h:3086:10: error: implicit declaration of function 'strncmp' [-Werror=implicit-function-declaration] return strncmp (name, ".ctf", 4) == 0 && (name[4] == 0 || name[4] == '.'); gdb/ChangeLog: * acincludde.m4 (GDB_AC_CHECK_BFD): Include string.h in the test program. Change-Id: Iec5e21d454c2a544c44d65e23cfde552c424c18e | |||||
| 2020-10-31 | gdb: modernize acinclude.m4 | Simon Marchi | 1 | -16/+32 | |
| Run autoupdate, fix indentation for readability. gdb/ChangeLog: * acinclude.m4: Modernize. * configure: Re-generate. Change-Id: I8949f885326a3206f414776b63a1fdba197bb19a | |||||
| 2020-10-31 | gdb: use AC_PROG_CC_STDC instead of AM_PROG_CC_STDC | Simon Marchi | 1 | -108/+0 | |
| `autoconf -Wall` notes that AM_PROG_CC_STDC is obsolete: Fixes this autoconf warning: configure.ac:40: warning: 'AM_PROG_CC_STDC': this macro is obsolete. configure.ac:40: You should simply use the 'AC_PROG_CC' macro instead. configure.ac:40: Also, your code should no longer depend upon 'am_cv_prog_cc_stdc', configure.ac:40: but upon 'ac_cv_prog_cc_stdc'. aclocal.m4:770: AM_PROG_CC_STDC is expanded from... configure.ac:40: the top level Since we build with a C++ compiler now, I don't think this is relevant. If you look at the messages removed from gdbsupport/aclocal.m4, it says that this functionality is now integrated in AC_PROG_CC, which we already call. So it might not even make a difference. We had a local version of AM_PROG_CC_STDC, in gdb/acinclude.m4 (only used by gdb/configure.ac), remove it. gdb/ChangeLog: * acinclude.m4 (AM_PROG_CC_STDC): Remove. * configure: Re-generate. * configure.ac: Remove AM_PROG_CC_STDC. gdbsupport/ChangeLog: * aclocal.m4: Re-generate. * configure: Re-generate. * configure.ac: Remove AM_PROG_CC_STDC. Change-Id: Ic824393598805d4f78cda9d119f8af46096e9c73 | |||||
| 2020-10-25 | gdb: move ptrace.m4 to gdbsupport | Simon Marchi | 1 | -1/+1 | |
| ptrace.m4, providing the GDB_AC_PTRACE autoconf macro, is used by gdb, gdbserver and gdbsupport. I think it would make sense to move it to gdbsupport. gdb/ChangeLog: * acinclude.m4: Update ptrace.m4 path. * ptrace.m4: Moved to gdbsupport. gdbserver/ChangeLog: * acinclude.m4: Update ptrace.m4 path. gdbsupport/ChangeLog: * Makefile.in: Re-generate. * acinclude.m4: Update ptrace.m4 path. * ptrace.m4: Move here. Change-Id: I849c149fd5dd8c3b2b0af38654fb353e3727871b | |||||
| 2020-06-26 | Fix --enable-libctf and --disable-static | Nick Alcock | 1 | -0/+3 | |
| This fixes test runs and compilation when --disable-libctf, --disable-static, or --enable-shared are passed. Changes since v2: Use GCC_ENABLE and fix indentation. Fix prototype using 'void'. Use 'unsupported' and gdb_caching_proc. Changes since v3: Adapt to upstream changes providing skip_ctf_tests. Changes since v4: Adapt to upstream changes in the seven months (!) since I last looked at this. gdb/ChangeLog * configure.ac: Add --enable-libctf: handle --disable-static properly. * acinclude.m4: sinclude ../config/enable.m4. * Makefile.in (aclocal_m4_deps): Adjust accordingly. (LIBCTF): Substitute in. (CTF_DEPS): New, likewise. (CLIBS): libctf needs symbols from libbfd: move earlier. (CDEPS): Use CTF_DEPS, not LIBCTF, now LIBCTF can include rpath flags. * ctfread.c: Surround in ENABLE_LIBCTF. (elfctf_build_psymtabs) [!ENABLE_LIBCTF]: New stub. * configure: Regenerate. * config.in: Likewise. gdb/testsuite/ChangeLog * configure.ac: Add --enable-libctf. * aclocal.m4: sinclude ../config/enable.m4. * Makefile.in (site.exp): Add enable_libctf to site.exp. * lib/gdb.exp (skip_ctf_tests): Use it. * gdb.base/ctf-constvars.exp: Error message tweak. * gdb.base/ctf-ptype.exp: Likewise. * configure: Regenerate. | |||||
| 2020-03-12 | Move gdb/selftest.m4 to gdbsupport/selftest.m4 | Simon Marchi | 1 | -1/+1 | |
| The selftest.m4 file is used by gdb, gdbserver and gdbsupport, I think it belongs in gdbsupport. gdb/ChangeLog: * selftest.m4: Move to gdbsupport/. * acinclude.m4: Update path to selftest.m4. gdbserver/ChangeLog: * acinclude.m4: Update path to selftest.m4. gdbsupport/ChangeLog: * selftest.m4: Moved from gdb/. * acinclude.m4: Update path to selftest.m4. | |||||
| 2020-02-11 | Move gdb/warning.m4 to gdbsupport | Simon Marchi | 1 | -1/+1 | |
| This file is used by gdbsupport, gdbserver and gdb, so I think it belongs in gdbsupport. Move it there and update the references the various acinclude.m4 files. gdbsupport/ChangeLog: * warning.m4: Move here, from gdb/warning.m4. * acinclude.m4: Update warning.m4 path. * Makefile.in: Re-generate. gdbserver/ChangeLog: * acinclude.m4: Update warning.m4 path. gdb/ChangeLog: * acinclude: Update warning.m4 path. * warning.m4: Move to gdbsupport. | |||||
| 2020-01-14 | Move gdbsupport to the top level | Tom Tromey | 1 | -1/+1 | |
| This patch moves the gdbsupport directory to the top level. This is the next step in the ongoing project to move gdbserver to the top level. The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport". This patch then adds a build system to gdbsupport and wires it into the top level. Then it changes gdb to use the top-level build. gdbserver, on the other hand, is not yet changed. It still does its own build of gdbsupport. ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport. * MAINTAINERS: Add gdbsupport. * configure: Rebuild. * configure.ac (configdirs): Add gdbsupport. * gdbsupport: New directory, move from gdb/gdbsupport. * Makefile.def (host_modules, dependencies): Add gnulib. * Makefile.in: Rebuild. gdb/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * nat/x86-linux-dregs.c: Include configh.h. * nat/linux-ptrace.c: Include configh.h. * nat/linux-btrace.c: Include configh.h. * defs.h: Include config.h, bfd.h. * configure.ac: Don't source common.host. (CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files. * configure: Rebuild. * acinclude.m4: Update path. * Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables. (CONFIG_SRC_SUBDIR): Remove gdbsupport. (INTERNAL_CFLAGS_BASE): Add INCSUPPORT. (CLIBS): Add LIBSUPPORT. (CDEPS): Likewise. (COMMON_SFILES): Remove gdbsupport files. (HFILES_NO_SRCDIR): Likewise. (stamp-version): Update path to create-version.sh. (ALLDEPFILES): Remove gdbsupport files. gdb/gdbserver/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * server.h: Include config.h. * gdbreplay.c: Include config.h. * configure: Rebuild. * configure.ac: Don't source common.host. * acinclude.m4: Update path. * Makefile.in (INCSUPPORT): New variable. (INCLUDE_CFLAGS): Add INCSUPPORT. (SFILES): Update paths. (version-generated.c): Update path to create-version.sh. (gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths. gdbsupport/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * common-defs.h: Add GDBSERVER case. Update includes. * acinclude.m4, aclocal.m4, config.in, configure, configure.ac, Makefile.am, Makefile.in, README: New files. * Moved from ../gdb/gdbsupport/ Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78 | |||||
| 2020-01-01 | Update copyright year range in all GDB files. | Joel Brobecker | 1 | -1/+1 | |
| gdb/ChangeLog: Update copyright year range in all GDB files. | |||||
| 2019-11-26 | Add configure check for std::thread | Tom Tromey | 1 | -0/+2 | |
| This adds a configure check for std::thread. This is needed because std::thread is not available on some systems, like some versions of mingw and DJGPP. This also adds configury to make sure that a threaded gdb links against the correct threading library (-lpthread or the like), and passes the right flags (e.g., -pthread) to the compilations. Note that this also links gdbserver against the thread library. This is not strictly necessary at this point in the series, but a later patch will change gdbsupport to use pthread_sigmask, at which point this will be needed. gdb/ChangeLog 2019-11-26 Tom Tromey <tom@tromey.com> * acinclude.m4: Include ax_pthread.m4. * Makefile.in (PTHREAD_CFLAGS, PTHREAD_LIBS): New variables. (INTERNAL_CFLAGS_BASE): Use PTHREAD_CFLAGS. (CLIBS): Use PTHREAD_LIBS. (aclocal_m4_deps): Add ax_pthread.m4. * config.in, configure: Rebuild. * gdbsupport/common.m4 (GDB_AC_COMMON): Check for std::thread. gdb/gdbserver/ChangeLog 2019-11-26 Tom Tromey <tom@tromey.com> * Makefile.in (PTHREAD_CFLAGS, PTHREAD_LIBS): New variables. (INTERNAL_CFLAGS_BASE): Use PTHREAD_CFLAGS. (GDBSERVER_LIBS): Use PTHREAD_LIBS. * acinclude.m4: Include ax_pthread.m4. * config.in, configure: Rebuild. Change-Id: I00ec55db6077f2615421a93461fc3be57e916aa0 | |||||
| 2019-10-23 | Use m4_include, not sinclude in .m4 files | Tom Tromey | 1 | -22/+22 | |
| Pedro pointed out that sinclude does not error if a file is missing. This patch changes gdb to only use m4_include, which seems more correct. gdb/ChangeLog 2019-10-23 Tom Tromey <tom@tromey.com> * configure: Rebuild. * acinclude.m4: Use m4_include, not sinclude. gdb/gdbserver/ChangeLog 2019-10-23 Tom Tromey <tom@tromey.com> * configure: Rebuild. * acinclude.m4: Use m4_include, not sinclude. gdb/testsuite/ChangeLog 2019-10-23 Tom Tromey <tom@tromey.com> * configure: Rebuild. * aclocal.m4: Use m4_include, not sinclude. Change-Id: I970362e0af7875f9f72796401126acf0ff6dba11 | |||||
| 2019-08-06 | [PR build/24886] disable glibc mcheck support | Frank Ch. Eigler | 1 | -3/+0 | |
| This patch drops gdb's configury support for glibc's mcheck function. It has been observed to cause false abort()s, because it is thread-unsafe yet interposes every malloc/free operation. So if any library transitively used by gdb also uses threads, then these functions can easily corrupt their own checking data. These days, gcc ASAN and valgrind provide high quality checking, and mcheck is apparently itself being slowly deprecated. So, let's stop linking to it. Attached patch drops the autoconf/Makefile machinery for both gdb and gdbserver. No testsuite-visible impact. IMHO not worth mentioning in NEWS. See also: https://sourceware.org/bugzilla/show_bug.cgi?id=9939 gdb/ChangeLog PR build/24886 * configure.ac: Drop enable-libmcheck support. * configure, config.in: Rebuild. * libmcheck.m4: Remove. * acinclude.m4: Don't include it. * Makefile.in: Don't distribute it. * top.c (print_gdb_configuration): Don't mention it. gdb/gdbserver/ChangeLog PR build/24886 * configure.ac: Drop enable-libmcheck support. * configure, config.in: Rebuild. * acinclude.m4: Don't include it. | |||||
| 2019-07-09 | Rename common to gdbsupport | Tom Tromey | 1 | -1/+1 | |
| This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport. | |||||
| 2019-01-01 | Update copyright year range in all GDB files. | Joel Brobecker | 1 | -1/+1 | |
| This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files. | |||||
| 2018-10-10 | Add parameter to allow enabling/disabling selftests via configure | Sergio Durigan Junior | 1 | -0/+3 | |
| This is a follow-up of: https://sourceware.org/ml/gdb-patches/2018-08/msg00347.html Instead of going throttle and always enabling our selftests (even in non-development builds), this patch is a bit more conservative and introduces a configure option ("--enable-unit-tests") that allows the user to choose whether she wants unit tests in the build or not. Note that the current behaviour is retained: if no option is provided, GDB will have selftests included in a development build, and will *not* have selftests included in a non-development build. The rationale for having this option is still the same: due to the many racy testcases and random failures we see when running the GDB testsuite, it is unfortunately not possible to perform a full test when one is building a downstream package. As the Fedora GDB maintainer and one of the Debian GDB uploaders, I feel like this situation could be improved by, at least, executing our selftests after the package has been built. This patch introduces no regressions to our build. OK? gdb/ChangeLog: 2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com> Simon Marchi <simark@simark.ca> * README (`configure' options): Add documentation for new "--enable-unit-tests" option. * acinclude.m4: Include "selftest.m4". * configure: Regenerate. * configure.ac: Use "GDB_AC_SELFTEST". * maint.c (maintenance_selftest): Update message informing that selftests have been disabled. (maintenance_info_selftests): Likewise. * selftest.m4: New file. gdb/gdbserver/ChangeLog: 2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com> Simon Marchi <simark@simark.ca> * acinclude.m4: Include "../selftest.m4". * configure: Regenerate. * configure.ac: Use "GDB_AC_SELFTEST". * configure.srv: Use "$enable_unittests" instead of "$development" when checking whether unit tests have been enabled. * server.c (captured_main): Update message informing that selftests have been disabled. gdb/testsuite/ChangeLog: 2018-10-10 Sergio Durigan Junior <sergiodj@redhat.com> * gdb.gdb/unittest.exp: Update expected message informing that selftests have been disabled. * gdb.server/unittest.exp: Likewise. squash! Add parameter to allow enabling/disabling selftests via configure | |||||
| 2018-10-03 | Add --enable-ubsan | Tom Tromey | 1 | -0/+3 | |
| This adds --enable-ubsan to gdb's configure. By default it is enabled in development mode, and disabled otherwise. This passes both -fsanitize=undefined and -fno-sanitize-recover=undefined to compilations, so that undefined behavior violations will be sure to cause test failures. gdb/ChangeLog 2018-10-03 Tom Tromey <tom@tromey.com> * README: Mention --enable-ubsan. * NEWS: Mention --enable-ubsan. * acinclude.m4: Include sanitize.m4. * configure: Rebuild. * configure.ac: Call AM_GDB_UBSAN. * sanitize.m4: New file. gdb/doc/ChangeLog 2018-10-03 Tom Tromey <tom@tromey.com> * gdb.texinfo (Configure Options): Document --enable-ubsan. | |||||
| 2018-01-02 | Update copyright year range in all GDB files | Joel Brobecker | 1 | -1/+1 | |
| gdb/ChangeLog: Update copyright year range in all GDB files | |||||
| 2017-01-01 | update copyright year range in GDB files | Joel Brobecker | 1 | -1/+1 | |
| This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files. | |||||
| 2016-10-28 | gdb: Require C++11 | Pedro Alves | 1 | -0/+2 | |
| Use AX_CXX_COMPILE_STDCXX to detect if the compiler supports C++11, and if -std=xxx switches are necessary to enable C++11. We need to tweak AX_CXX_COMPILE_STDCXX a bit though. Pristine upstream AX_CXX_COMPILE_STDCXX appends -std=gnu++11 to CXX directly. That doesn't work for us, because the top level Makefile passes CXX down to subdirs, and that overrides whatever gdb/Makefile may set CXX to. The result would be that a make invocation from the build/gdb/ directory would use "g++ -std=gnu++11" as expected, while a make invocation at the top level would not. So instead of having AX_CXX_COMPILE_STDCXX set CXX directly, tweak it to AC_SUBST a separate variable -- CXX_DIALECT -- and use '$(CXX) (CXX_DIALECT)' to compile/link. Confirmed that this enables C++11 starting with gcc 4.8, the first gcc release with full C++11 support. Also confirmed that configure errors out gracefully with older GCC releases: checking whether /opt/gcc-4.7/bin/g++ supports C++11 features by default... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=gnu++11... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=gnu++0x... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=c++11... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -std=c++0x... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with +std=c++11... no checking whether /opt/gcc-4.7/bin/g++ supports C++11 features with -h std=c++11... no configure: error: *** A compiler with support for C++11 language features is required. Makefile:9451: recipe for target 'configure-gdb' failed make[1]: *** [configure-gdb] Error 1 make[1]: Leaving directory '/home/pedro/brno/pedro/gdb/mygit/cxx-convertion/build-gcc-4.7' If we need to revert back to making C++11 optional, all that's necessary is to change the "mandatory" to "optional" in configure.ac and regenerate configure (both gdb and gdbserver). gdb/ChangeLog: 2016-10-28 Pedro Alves <palves@redhat.com> * Makefile.in (CXX_DIALECT): Get from configure. (COMPILE.pre, CC_LD): Append $(CXX_DIALECT). (FLAGS_TO_PASS): Pass CXX_DIALECT. * acinclude.m4: Include ax_cxx_compile_stdcxx.m4. * ax_cxx_compile_stdcxx.m4: Add FSF copyright header. Set and AC_SUBST CXX_DIALECT instead of changing CXX/CXXCPP. * configure.ac: Call AX_CXX_COMPILE_STDCXX. * config.in: Regenerate. * configure: Regenerate. gdb/gdbserver/ChangeLog: 2016-10-28 Pedro Alves <palves@redhat.com> * Makefile.in (CXX_DIALECT): Get from configure. (COMPILE.pre, CC_LD): Append $(CXX_DIALECT). * acinclude.m4: Include ../ax_cxx_compile_stdcxx.m4. * configure.ac: Call AX_CXX_COMPILE_STDCXX. * config.in: Regenerate. * configure: Regenerate. | |||||
| 2016-09-05 | gdb/: Require a C++ compiler | Pedro Alves | 1 | -3/+0 | |
| This removes all support for building gdb & gdbserver with a C compiler from gdb & gdbserver's build machinery. gdb/ChangeLog: 2016-09-05 Pedro Alves <palves@redhat.com> * NEWS: Mention that a C++ compiler is now required. * Makefile.in (COMPILER, COMPILER_CFLAGS): Remove. (COMPILE.pre, CC_LD): Use CXX directly. (INTERNAL_CFLAGS_BASE): Use CXXFLAGS directly. * acinclude.m4: Don't include build-with-cxx.m4. * build-with-cxx.m4: Delete file. * configure.ac: Remove GDB_AC_BUILD_WITH_CXX call. * warning.m4: Assume $enable_build_with_cxx is yes. * configure: Regenerate. gdb/gdbserver/ChangeLog: 2016-09-05 Pedro Alves <palves@redhat.com> * Makefile.in (COMPILER, COMPILER_CFLAGS): Remove. (COMPILE.pre, CC_LD): Use CXX directly. (INTERNAL_CFLAGS_BASE): Use CXXFLAGS directly. * acinclude.m4: Don't include build-with-cxx.m4. * configure.ac: Remove GDB_AC_BUILD_WITH_CXX call. * configure: Regenerate. | |||||
| 2016-01-11 | gdb: split out warnings helpers | Mike Frysinger | 1 | -0/+3 | |
| This will allow the sim tree to use the same set of warnings. The new code in warning.m4 is exactly the same (other than the AC_DEFUN wrapping). | |||||
| 2016-01-01 | GDB copyright headers update after running GDB's copyright.py script. | Joel Brobecker | 1 | -1/+1 | |
| gdb/ChangeLog: Update year range in copyright notice of all files. | |||||
| 2015-08-06 | Yaakov Selkowitz: fixes for in-tree libiconv | DJ Delorie | 1 | -125/+2 | |
| * Makefile.def (libiconv): Define bootstrap=true. Mark pdf/html/info as missing. (configure-gcc): Depend on all-libiconv. (all-gcc): Ditto. (configure-libcpp): Ditto. (all-libcpp): Ditto. (configure-intl): Ditto. (all-intl): Ditto. * Makefile.in: Regenerate. binutils/ * configure: Regenerate. gdb/ * Makefile.in (LIBICONV): Define. (CLIBS): Add LIBICONV. * acinclude.m4: Use config/iconv.m4 instead of custom AM_ICONV. * configure: Regenerate. | |||||
| 2015-07-24 | make gdbserver use the same ptrace autoconf checks as gdb | Pedro Alves | 1 | -0/+3 | |
| This factors the ptrace checks out of gdb's configure.ac to a new ptrace.m4 file, and then makes gdbserver's configure.ac source it too. gdb/ChangeLog: 2015-07-24 Pedro Alves <palves@redhat.com> * acinclude.m4: Include ptrace.m4. * configure.ac: Call GDB_AC_PTRACE and move ptrace checks ... * ptrace.m4: ... to this new file. gdb/gdbserver/ChangeLog: 2015-07-24 Pedro Alves <palves@redhat.com> * acinclude.m4: Include ../ptrace.m4. * configure.ac: Call GDB_AC_PTRACE. * config.in, configure: Regenerate. | |||||
| 2015-04-09 | Replace $zlibdir with $ZLIBDIR in LDFLAGS | H.J. Lu | 1 | -1/+2 | |
| * acinclude.m4: (GDB_AC_CHECK_BFD): Set ZLIBDIR with $zlibdir. Replace $zlibdir with $ZLIBDIR in LDFLAGS. * configure: Regenerated. | |||||
| 2015-03-31 | Add --with-system-zlib in gdb | H.J. Lu | 1 | -2/+2 | |
| This patch adds --with-system-zlib and removes --with-zlib in gdb. * Makefile.in (ZLIB): New. (ZLIBINC): Likewise. (INTERNAL_CFLAGS_BASE): Add $(ZLIBINC). (CLIBS): Add $(ZLIB). * acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS. Add -lz to LIBS. * gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>. * top.c (print_gdb_configuration): Remove --with-zlib and --without-zlib. * config.in: Regenerated. * configure: Likewise. | |||||
| 2015-02-27 | Add --enable-build-with-cxx configure switch | Pedro Alves | 1 | -0/+3 | |
| This new option, disabled by default for now, allows specifying whether to build GDB, GDBserver, and friends with a C++ (98/03) compiler. The name of the switch should be familiar to those who followed GCC's own C++ conversion process. . Adding -fpermissive to COMPILER in C++ mode (see the new build-with-cxx.m4 file) makes errors like these be warnings instead: gdb/infrun.c:6597:1: error: initializing argument 1 of ‘void sig_print_info(gdb_signal)’ [-fpermissive] sig_print_info (enum gdb_signal oursig) ^ gdb/infrun.c: In function ‘void do_restore_infcall_suspend_state_cleanup(void*)’: gdb/infrun.c:7164:39: error: invalid conversion from ‘void*’ to ‘infcall_suspend_state*’ [-fpermissive] restore_infcall_suspend_state (state); ^ so that the compiler carries on compiling the file. -Werror still catches the warnings, so nothing is lost, only our lifes are made easier by concentrating on getting other more important things out of the way first. There's no way to quiet those warnings. Until they're all fixed, when building in C++ mode, -Werror is disabled by default. . Adding -Wno-narrowing suppresses thousands of instances of this warning: gdb/arm-linux-tdep.c:439:1: error: narrowing conversion of ‘-1’ from ‘int’ to ‘ULONGEST {aka long unsigned int}’ inside { } is ill-formed in C++11 [-Werror=narrowing] gdb/arm-linux-tdep.c:439:1: error: narrowing conversion of ‘-1l’ from ‘LONGEST {aka long int}’ to ‘ULONGEST {aka long unsigned int}’ inside { } is ill-formed in C++11 [-Werror=narrowing] gdb/arm-linux-tdep.c:450:1: error: narrowing conversion of ‘-1’ from ‘int’ to ‘ULONGEST {aka long unsigned int}’ inside { } is ill-formed in C++11 [-Werror=narrowing] We can defer handling those until we target C++11. . Adding -Wno-sign-compare suppresses thousands of instances of this warning: gdb/linux-record.c:1763:32: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] if (tmpulongest == tdep->fcntl_F_GETLK64) ^ . Adding -Wno-write-strings suppresses thousands of instances of this warning: gdb/mi/mi-cmd-var.c: In function ‘void mi_cmd_var_show_attributes(char*, char**, int)’: gdb/mi/mi-cmd-var.c:514:12: warning: deprecated conversion from string constant to ‘char*’ [-Wwrite-strings] attstr = "editable"; ^ gdb/mi/mi-cmd-var.c:516:12: warning: deprecated conversion from string constant to ‘char*’ [-Wwrite-strings] attstr = "noneditable"; ^ For now, it's best to hide these warnings from view until we're '-fpermissive'-clean, and can thus start building with -Werror. The C compiler has always managed to build working GDBs with these issues in the code, so a C++ compiler should too. gdb/ChangeLog: 2015-02-27 Pedro Alves <palves@redhat.com> * Makefile.in (COMPILER): New, get it from autoconf. (COMPILE.pre, CC_LD): Use COMPILER. (CXX): Get from autoconf instead. (CXX_FOR_TARGET): Default to g++ instead of gcc. * acinclude.m4: Include build-with-cxx.m4. * build-with-cxx.m4: New file. * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX. Disable -Werror by default if building in C++ mode. (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and -Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode. Run supported-warning-flags tests with the C++ compiler. Save/restore CXXFLAGS too. * configure: Regenerate. gdb/gdbserver/ChangeLog: 2015-02-27 Pedro Alves <palves@redhat.com> * Makefile.in (COMPILER): New, get it from autoconf. (CXX): Get from autoconf instead. (COMPILE.pre): Use COMPILER. (CC-LD): Rename to ... (CC_LD): ... this. Use COMPILER. (gdbserver$(EXEEXT), gdbreplay$(EXEEXT), $(IPA_LIB)): Adjust. (CXX_FOR_TARGET): Default to g++ instead of gcc. * acinclude.m4: Include build-with-cxx.m4. * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX. Disable -Werror by default if building in C++ mode. (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and -Wno-narrowing in C++ mode. Run supported-warning-flags tests with the C++ compiler. Save/restore CXXFLAGS too. * configure: Regenerate. | |||||
| 2015-02-27 | Create libiberty.m4, have GDB and GDBserver use it | Pedro Alves | 1 | -0/+3 | |
| Converting GDB to be a C++ program, I stumbled on 'basename' issues, like: src/gdb/../include/ansidecl.h:169:64: error: new declaration ‘char* basename(const char*)’ /usr/include/string.h:597:26: error: ambiguates old declaration ‘const char* basename(const char*)’ which I believe led to this bit in gold's configure.ac: dnl We have to check these in C, not C++, because autoconf generates dnl tests which have no type information, and current glibc provides dnl multiple declarations of functions like basename when compiling dnl with C++. AC_CHECK_DECLS([basename, ffs, asprintf, vasprintf, snprintf, vsnprintf, strverscmp]) These checks IIUC intend to generate all the HAVE_DECL_FOO symbols that libiberty.h and ansidecl.h check. GDB is missing these checks currently, which results in the conflict shown above. This adds an m4 file that both GDB and GDBserver's configury use to pull in the autoconf checks that libiberty clients needs done in order to use these libiberty.h/ansidecl.h. gdb/ChangeLog: 2015-02-27 Pedro Alves <palves@redhat.com> * libiberty.m4: New file. * acinclude.m4: Include libiberty.m4. * configure.ac: Call libiberty_INIT. * config.in, configure: Regenerate. gdb/gdbserver/ 2015-02-27 Pedro Alves <palves@redhat.com> * acinclude.m4: Include libiberty.m4. * configure.ac: Call libiberty_INIT. * config.in, configure: Regenerate. | |||||
| 2015-02-18 | Factorize target program transformations in the GDB_AC_TRANSFORM macro. | Jose E. Marchesi | 1 | -0/+3 | |
| This patch introduces a new M4 macro GDB_AC_TRANSFORM to avoid repeating the common idiom which is the transformation of target program names, i.e. from gdb to sparc64-linux-gnu-gdb. It also makes gdb/configure.ac and gdb/testsuite/configure.ac to use the new macro. gdb/ChangeLog: 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com> * configure: Regenerated. * configure.ac: Use GDB_AC_TRANSFORM. * Makefile.in (aclocal_m4_deps): Added transform.m4. * acinclude.m4: sinclude transform.m4. * transform.m4: New file. (GDB_AC_TRANSFORM): New macro. gdb/testsuite/ChangeLog: 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com> * configure: Regenerated. * configure.ac: Use GDB_AC_TRANSFORM. * aclocal.m4: sinclude ../transform.m4. | |||||
| 2015-01-01 | Update year range in copyright notice of all files owned by the GDB project. | Joel Brobecker | 1 | -1/+1 | |
| gdb/ChangeLog: Update year range in copyright notice of all files. | |||||
| 2014-09-09 | PR guile/17367 | Doug Evans | 1 | -2/+2 | |
| gdb/ChangeLog: * acinclude.m4 (GDB_GUILE_PROGRAM_NAMES): Pass guile version as last parameter to pkg-config, not first. * configure.ac: Pass --with-guile provided pkg-config path to GDB_GUILE_PROGRAM_NAMES. * configure: Regenerate. | |||||
| 2014-08-19 | Fix --diable-shared --enable-plugins build breakage | Alan Modra | 1 | -4/+0 | |
| Directories that don't use libtool need to add -ldl (on most *nix hosts) to provide dlopen for libbfd. config/ * plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to LIBS via AC_SEARCH_LIBS. gdb/ * acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl. * config.in: Regenerate. sim/ppc/ * configure.ac: Invoke AC_PLUGINS. * config.in: Regenerate. and regen lots of configure files. | |||||
| 2014-07-26 | PR guile/17146 | Doug Evans | 1 | -0/+72 | |
| * acinclude.m4 (GDB_GUILE_PROGRAM_NAMES): New macro. (GDB_GUILD_TARGET_FLAG, GDB_TRY_GUILD): New macros. * configure.ac: Try to use guild to compile an scm file, if it fails then disable guile support. * configure: Regenerate. * data-directory/Makefile.in (GUILE_SOURCE_FILES): Renamed from GUILE_FILE_LIST. (GUILE_COMPILED_FILES): New variable. (GUILE_FILES) Update. (GUILD, GUILD_TARGET_FLAG, GUILD_COMPILE_FLAGS): New variables. (stamp-guile): Compile scm files. * guile/guile.c (boot_guile_support): New function. (standard_throw_args_p): New function. (print_standard_throw_error, print_throw_error): New functions. (handle_boot_error): New function. (initialize_scheme_side): Rewrite to call boot_guile_support. * guile/lib/gdb/boot.scm: Update %load-compiled-path. Load gdb.go. * guile/lib/gdb/init.scm (%silence-compiler-warnings%): New function. | |||||
| 2014-01-01 | Update Copyright year range in all files maintained by GDB. | Joel Brobecker | 1 | -1/+1 | |
| 2013-11-08 | introduce common.m4 | Tom Tromey | 1 | -0/+2 | |
| It has bothered me for a while that files in common/ use macros defined via autoconf checks, but rely on each configure.ac doing the proper checks independently. This patch introduces common/common.m4 which consolidates the checks assumed by code in common. The rule I propose is that if something is needed or used by common, it should be checked for by common.m4. However, if the check is also needed by gdb or gdbserver, then it should be duplicated there. Built and regtested on x86-64 Fedora 18 (though this is hardly the most strenuous case) and using the Fedora 18 mingw cross compilers. I also examined the config.in diffs to ensure that symbols did not go missing. 2013-11-08 Tom Tromey <tromey@redhat.com> * acinclude.m4: Include common.m4. * common/common.m4: New file. * configure, config.in: Rebuild. * configure.ac: Use GDB_AC_COMMON. 2013-11-08 Tom Tromey <tromey@redhat.com> * acinclude.m4: Include common.m4, codeset.m4. * configure, config.in: Rebuild. * configure.ac: Use GDB_AC_COMMON. | |||||
| 2013-07-03 | On mainline/development, also link GDBserver with -lmcheck. | Pedro Alves | 1 | -0/+3 | |
| This factors --enable-libmcheck related bits from GDB's configure.ac and makes GDBserver use them too. Specifically, the 'development' global is moved to a separate script to it can be sourced by both GDB and GDBserver, and the --enable-libmcheck/--disable-libmcheck bits proper are moved to a new m4 file. I started out by defining 'development' in the m4 file, but in the end decided against it, as a separate script has the advantage that changing it in release branches does not require regenerating configure, unlike today. I had also started out by making the new GDB_AC_LIBMCHECK itself handle the yes/no default fallback depending on release/developement, but since I had split out 'development' to a separate script, and, GDB needs the python checks anyway (hence we'd need to do the python checks in gdb's configure.ac, and pass in a 'default lmcheck yes/no' parameter to GDB_AC_LIBMCHECK anyway), I ended up keeping GDB_AC_LIBMCHECK isolated from the 'development' global. IOW, it's the caller's business to handle it. Tested on x86_64 Fedora 17. Built GDB and GDBserver with and without --enable-libmcheck, and observed --enable-libmcheck overrides the disablement of -lmcheck caused by python supporting threads, and that GDBserver links with -lmcheck when expected. Also observed that changing the 'development' global, and issuing "make" triggers a relink, and '-lmcheck' is included or not from the link accordingly. gdb/ 2013-07-03 Pedro Alves <palves@redhat.com> * Makefile.in (config.status): Depend on development.sh. (aclocal_m4_deps): Add libmcheck.m4. * acinclude.m4: Include libmcheck.m4. * configure.ac: Source development.sh instead of setting 'development' here. --enable-libmcheck/--disable-libmcheck code factored out to GDB_AC_LIBMCHECK. Run it. * development.sh: New file. * libmcheck.m4: New file. * configure: Regenerate. gdb/gdbserver/ 2013-07-03 Pedro Alves <palves@redhat.com> * Makefile.in (config.status): Depend on development.sh. * acinclude.m4: Include libmcheck.m4. * configure: Regenerate. | |||||
| 2013-05-17 | Replace hardcoded -ldl with check for availability | H.J. Lu | 1 | -1/+1 | |
| 2013-05-17 Pavel Chupin <pavel.v.chupin@intel.com> * acinclude.m4: Add check for dlopen in libdl. * configure.ac: Ditto. * configure: Regenerate. | |||||
| 2013-01-17 | 2013-01-17 Pedro Alves <palves@redhat.com> | Pedro Alves | 1 | -2/+15 | |
| * acinclude.m4: Include ../config/plugins.m4, ../config/largefile.m4 and ../config/lead-dot.m4. Add comments. * Makefile.in (aclocal_m4_deps): Update. * aclocal.m4: Renegerate. | |||||
| 2013-01-02 | * acinclude.m4 (GDB_AC_CHECK_BFD): New macro. | Tom Tromey | 1 | -0/+34 | |
| * configure.ac: Use GDB_AC_CHECK_BFD. * configure: Rebuild. | |||||
| 2013-01-01 | Update years in copyright notice for the GDB files. | Joel Brobecker | 1 | -2/+1 | |
| Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF. | |||||
| 2012-12-19 | update copyright notices in various GDB files. | Joel Brobecker | 1 | -3/+1 | |
| Update some files in GDB that were accidently left with a GPL v2 copyright header. Update some files where the copyright notice still provides the old contact info, using the approach for providing the FSF's contact info. gdb/ChangeLog: * acinclude.m4: Update contact info in copyright notice. gdb/doc/ChangeLog: * refcard.tex: Update copyright notice to GPL v3 or later. Update contact info. gdb/testsuite/ChangeLog: * dg-extract-results.sh: Update contact info in copyright notice. * gdb.arch/mips-octeon-bbit.exp: Update copyright notice to GPL v3 or later. Update contact info. * gdb.fortran/logical.f90, gdb.threads/watchpoint-fork-child.c, gdb.threads/watchpoint-fork-mt.c, gdb.threads/watchpoint-fork-parent.c, gdb.threads/watchpoint-fork-st.c, gdb.threads/watchpoint-fork.h: Likewise. | |||||
| 2012-12-13 | * acinclude.m4 (CY_AC_C_WORKS): Remove. | Tom Tromey | 1 | -25/+1 | |
| 2012-04-19 | 2012-04-19 Pedro Alves <palves@redhat.com> | Pedro Alves | 1 | -0/+2 | |
| gdb/ * Makefile.in (GNULIB_BUILDDIR): New. (LIBGNU, INCGNU, GNULIB_H): Adjust. (SUBDIRS): Add $(GNULIB_BUILDDIR). (CLEANDIRS). Remove gnulib/import. (REQUIRED_SUBDIRS): Replace gnulib/import with $(GNULIB_BUILDDIR). (all-lib): Ditto. (distclean): Remove the $(GNULIB_BUILDDIR) directory. (gnulib/import/Makefile): Replace gnulib/import with $(GNULIB_BUILDDIR). Set CONFIG_FILES to just Makefile. (ACLOCAL_AMFLAGS): Remove '-I gnulib/import/m4'. (aclocal_m4_deps): Remove the gnulib dependencies. Add acx_configure_dir.m4. * acinclude.m4: Include acx_configure_dir.m4. * acx_configure_dir.m4: New file. * aclocal.m4: Regenerate. * configure.ac: Remove gl_EARLY, gl_INIT and AM_INIT_AUTOMAKE calls. Configure gnulib using ACX_CONFIGURE_DIR. (GNULIB): New variable. (GNULIB_STDINT_H): Adjust. (AC_OUTPUT): Don't output gnulib/Makefile. * gdb/defs.h: Include build-gnulib/config.h. * aclocal.m4: Regenerate. * config.in: Regenerate. * configure: Regenerate. * gnulib/Makefile.in: New file. * gnulib/configure.ac: New file. * gnulib/aclocal.m4: New file. * gnulib/config.in: New file. * gnulib/configure: New file. * gnulib/: Re-run gnulib-tool to adjust. gdb/gdbserver/ * Makefile.in (GNULIB_BUILDDIR): New. (LIBGNU, INCGNU, GNULIB_H): Adjust. (SUBDIRS, CLEANDIRS, REQUIRED_SUBDIRS): New. (all, install-only, uninstall, clean-info, all-lib, clean): No longer pass GNULIB_FLAGS_TO_PASS. Use subdir_do. (maintainer-clean realclean distclean): Use subdir_do. (subdir_do): New. (gnulib/import/Makefile): Adjust. Replace gnulib/import with $(GNULIB_BUILDDIR). Don't pass argument to config.status. * acinclude.m4: Include acx_configure_dir.m4. * configure.ac: Remove gl_EARLY, gl_INIT, and AM_INIT_AUTOMAKE calls. Call AC_PROG_RANLIB. Configure gnulib using ACX_CONFIGURE_DIR. (GNULIB): New. (GNULIB_STDINT_H): Adjust. (AC_OUTPUT): Don't output gnulib/Makefile anymore. * gdbreplay.c: Include build-gnulib/config.h. * server.h: Likewise. * aclocal.m4: Regenerate. * config.in: Regenerate. * configure: Regenerate. | |||||
| 2010-05-27 | Allow python to find its files if moved from original location. | Doug Evans | 1 | -15/+24 | |
| * acinclude.m4 (GDB_AC_DEFINE_RELOCATABLE): New function. (GDB_AC_WITH_DIR): Call it. * configure.ac: Define WITH_PYTHON_PATH if we can find the python installation directory. * config.in: Regenerate. * configure: Regenerate. * defs.h (python_libdir): Declare. * main.c (python_libdir): Define. (captured_main): Initialize python_libdir. * python/python.c (_initialize_python): #ifdef WITH_PYTHON_PATH, call Py_SetProgramName to make sure python can find its libraries and modules. | |||||
| 2010-01-08 | Cannot find in-tree libiconv.a after reconfigure. | Joel Brobecker | 1 | -2/+3 | |
| * acinclude.m4 (AM_ICONV): If we find an in-tree libiconv.a that we can use, then cache the path to this archive. * configure: Regenerate. | |||||
| 2009-12-09 | * acinclude.m4: Update comment. | Joel Brobecker | 1 | -1/+2 | |
| 2009-12-09 | * acinclude.m4: Link against in-tree libiconv by adding | Joel Brobecker | 1 | -15/+22 | |
| libiconv.a to the LIBS instead of using -liconv. * configure: Regenerate. | |||||
| 2009-11-24 | * acinclude.m4: Include ../config/zlib.m4. | Joel Brobecker | 1 | -0/+2 | |
| * configure.ac: Use AM_ZLIB to check for zlib support. * configure: Regenerate. | |||||
| 2009-05-06 | * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over | Joel Brobecker | 1 | -22/+26 | |
| system iconv. * configure: Regenerate. | |||||
 |
index : riscv-gnu-toolchain/binutils.git | |
| Unnamed repository; edit this file 'description' to name the repository. | root |
| aboutsummaryrefslogtreecommitdiff |