| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This code sets up the cc variable based on the comparison of other
registers, but it does so incrementally with bit operations, and it
never initializes the cc variable. Initialize it to 0 which the
cmpba insn is already doing.
|
|
The "flag" argument isn't set/used in this insn, so drop it.
This fixes an unused variable warning in the generated sim.
|
|
These fix unused variable warnings in the generated sim.
|
|
I had reason yesterday to want to regenerate configury files which I
do with --enable-maintainer-mode, and added --enable-cgen-maint
accidentally. The first problem I hit is that sim looks for cgen in a
different directory by default than opcodes, and I had my source
layout set up for opcodes rather than sim. Fix that by making both
use ../cgen first, then ../../cgen relative to sim/ and opcodes/. The
next problem was that various sim local.mk files expected generated
sources in the build dir rather than the source dir. Fix that by
adding $(srcdir) to paths. Finally, the generated iq2000 files had a
compile error, fixed by the cpu/iq2000.cpu patch.
cpu/
* iq2000.cpu (syscall): Add pc arg.
opcodes/
* configure.ac (cgendir): Default to ../../cgen, but use ../cgen
if found there.
* configure: Regenerate.
sim/m4/
* sim_ac_option_cgen_maint.m4 (cgendir): Look in ../cgen too.
sim/
* cris/local.mk: Add $(srcdir) to paths for regenerated source.
* frv/local.mk: Likewise.
* iq2000/local.mk: Likewise.
* lm32/local.mk: Likewise.
* m32r/local.mk: Likewise.
* or1k/local.mk: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
|
|
CGEN is cool, but the BPF architecture is simply too bizarre for it.
The weird way of BPF to handle endianness in instruction encoding, the
weird C-like alternative assembly syntax, the weird abuse of
multi-byte (or infra-byte) instruction fields as opcodes, the unusual
presence of opcodes beyond the first 32-bits of some instructions, are
all examples of what makes it a PITA to continue using CGEN for this
port. The bpf.cpu file is becoming so complex and so nested with
p-macros that it is very difficult to read, and quite challenging to
update. Also, every time we are forced to change something in CGEN to
accommodate BPF requirements (which is often) we have to do extensive
testing to make sure we do not break any other target using CGEN.
This is getting un-maintenable.
So I have decided to bite the bullet and revamp/rewrite the port so it
no longer uses CGEN. Overall, this involved:
* To remove the cpu/bpf.{cpu,opc} descriptions.
* To remove the CGEN generated files.
* To replace the CGEN generated opcodes table with a new hand-written
opcodes table for BPF.
* To replace the CGEN generated disassembler wih a new disassembler
that uses the new opcodes.
* To replace the CGEN generated assembler with a new assembler that uses the
new opcodes.
* To replace the CGEN generated simulator with a new simulator that uses the
new opcodes. [This is pushed in GDB in another patch.]
* To adapt the build systems to the new situation.
Additionally, this patch introduces some extensions and improvements:
* A new BPF relocation BPF_RELOC_BPF_DISP16 plus corresponding ELF
relocation R_BPF_GNU_64_16 are added to the BPF BFD port. These
relocations are used for section-relative 16-bit offsets used in
load/store instructions.
* The disassembler now has support for the "pseudo-c" assembly syntax of
BPF. What dialect to use when disassembling is controlled by a command
line option.
* The disassembler now has support for dumping instruction immediates in
either octal, hexadecimal or decimal. The used output base is controlled
by a new command-line option.
* The GAS BPF test suite has been re-structured and expanded in order to
test the disassembler pseudoc syntax support. Minor bugs have been also
fixed there. The assembler generic tests that were disabled for bpf-*-*
targets due to the previous implementation of pseudoc syntax are now
re-enabled. Additional tests have been added to test the new features of
the assembler. .dump files are no longer used.
* The linker BPF test suite has been adapted to the command line options
used by the new disassembler.
The result is very satisfactory. This patchs adds 3448 lines of code
and removes 10542 lines of code.
Tested in:
* Target bpf-unknown-none with 64-bit little-endian host and 32-bit
little-endian host.
* Target x86-64-linux-gnu with --enable-targets=all
Note that I have not tested in a big-endian host yet. I will do so
once this lands upstream so I can use the GCC compiler farm.
I have not included ChangeLog entries in this patch: these would be
massive and not very useful, considering this is pretty much a rewrite
of the port. I beg the indulgence of the global maintainers.
|
|
|
|
cpu/
* mep.opc: Whitespace and formatting.
opcodes/
* mep-asm.c: Regenerate.
* mep-dis.c: Regenerate.
|
|
PR 30231
* mep.opc (mep_print_insn): Check for an out of range index.
|
|
[-Werror=overflow]
Regenerating BPF target using the maintainer mode emits:
.../opcodes/bpf-opc.c:57:11: error: conversion from ‘long unsigned int’ to ‘unsigned int’ changes value from ‘18446744073709486335’ to ‘4294902015’ [-Werror=overflow]
57 | 64, 64, 0xffffffffffff00ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
The use of a narrow size to handle the mask CGEN in instruction format
is causing this error. Additionally eBPF `call' instructions
constructed by expressions using symbols (BPF_PSEUDO_CALL) emits
annotations in `src' field of the instruction, used to identify BPF
target endianness.
cpu/
* bpf.cpu (define-call-insn): Remove `src' field from
instruction mask.
include/
*opcode/cge.h (CGEN_IFMT): Adjust mask bit width.
opcodes/
* bpf-opc.c: Regenerate.
|
|
|
|
|
|
Commit 04f096fb9e25 ("Move the xc16x target to the obsolete list") moved
the architecture from the "obsolete but still available" to the
"obsolete / support removed" list in config.bfd, making the architecture
impossible to enable (except maybe via "enable everything" options").
Note that I didn't touch */po/*.po{,t} on the assumption that these
would be updated by some (half)automatic means.
|
|
Note that opcodes is regenerated with cgen commit d1dd5fcc38e reverted,
due to failure of bpf to compile with that patch applied.
.../opcodes/bpf-opc.c:57:11: error: conversion from ‘long unsigned int’ to ‘unsigned int’ changes value from ‘18446744073709486335’ to ‘4294902015’ [-Werror=overflow]
57 | 64, 64, 0xffffffffffff00ff, { { F (F_IMM32) }, { F (F_OFFSET16) }, { F (F_SRCLE) }, { F (F_OP_CODE) }, { F (F_DSTLE) }, { F (F_OP_SRC) }, { F (F_OP_CLASS) }, { 0 } }
plus other similar errors.
cpu/
* mep.opc (print_tpreg, print_spreg): Delete unnecessary
forward declarations. Replace PTR with void *.
* mt.opc (print_dollarhex, print_pcrel): Delete forward decls.
opcodes/
* bpf-desc.c, * bpf-dis.c, * cris-desc.c,
* epiphany-desc.c, * epiphany-dis.c,
* fr30-desc.c, * fr30-dis.c, * frv-desc.c, * frv-dis.c,
* ip2k-desc.c, * ip2k-dis.c, * iq2000-desc.c, * iq2000-dis.c,
* lm32-desc.c, * lm32-dis.c, * m32c-desc.c, * m32c-dis.c,
* m32r-desc.c, * m32r-dis.c, * mep-desc.c, * mep-dis.c,
* mt-desc.c, * mt-dis.c, * or1k-desc.c, * or1k-dis.c,
* xc16x-desc.c, * xc16x-dis.c,
* xstormy16-desc.c, * xstormy16-dis.c: Regenerate.
|
|
Currently, the get_disassembler() implementations for riscv, csky, and
rl78--and mep_print_insn() for mep--access ELF variants of union fields
without first checking that the bfd actually represents an ELF. This
causes undefined behavior and crashes when disassembling non-ELF files
(the "binary" BFD, for example). Fix that.
|
|
|
|
Commit f375d32b35ce changed a generated file. Edit the source instead.
* mep.opc (macros): Make static and const.
(lookup_macro): Return and use const pointer.
(expand_macro): Make mac param const.
(expand_string): Make pmacro const.
|
|
|
|
The gotha() relocation mnemonic will be outputted by OpenRISC GCC when
using the -mcmodel=large option. This relocation is used along with
got() to generate 32-bit GOT offsets. This increases the previous GOT
offset limit from the previous 16-bit (64K) limit.
This is needed on large binaries where the GOT grows larger than 64k.
bfd/ChangeLog:
PR 21464
* bfd-in2.h: Add BFD_RELOC_OR1K_GOT_AHI16 relocation.
* elf32-or1k.c (or1k_elf_howto_table, or1k_reloc_map): Likewise.
(or1k_final_link_relocate, or1k_elf_relocate_section,
or1k_elf_check_relocs): Likewise.
* libbfd.h (bfd_reloc_code_real_names): Likewise.
* reloc.c: Likewise.
cpu/ChangeLog:
PR 21464
* or1k.opc (or1k_imm16_relocs, parse_reloc): Define parse logic
for gotha() relocation.
include/ChangeLog:
PR 21464
* elf/or1k.h (elf_or1k_reloc_type): Define R_OR1K_GOT_AHI16 number.
opcodes/ChangeLog:
PR 21464
* or1k-asm.c: Regenerate.
gas/ChangeLog:
PR 21464
* testsuite/gas/or1k/reloc-1.s: Add test for new relocation.
* testsuite/gas/or1k/reloc-1.d: Add test result for new
relocation.
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
fixup reloc, add tests
|
|
cpu/
* frv.opc: Replace bfd_boolean with bool, FALSE with false, and
TRUE with true throughout.
opcodes/
* sysdep.h (POISON_BFD_BOOLEAN): Define.
* aarch64-asm-2.c, * aarch64-asm.c, * aarch64-asm.h,
* aarch64-dis-2.c, * aarch64-dis.c, * aarch64-dis.h,
* aarch64-gen.c, * aarch64-opc.c, * aarch64-opc.h, * arc-dis.c,
* arc-dis.h, * arc-fxi.h, * arc-opc.c, * arm-dis.c, * bfin-dis.c,
* cris-dis.c, * csky-dis.c, * csky-opc.h, * dis-buf.c,
* disassemble.c, * frv-opc.c, * frv-opc.h, * h8300-dis.c,
* i386-dis.c, * m68k-dis.c, * metag-dis.c, * microblaze-dis.c,
* microblaze-dis.h, * micromips-opc.c, * mips-dis.c,
* mips-formats.h, * mips-opc.c, * mips16-opc.c, * mmix-dis.c,
* msp430-dis.c, * nds32-dis.c, * nfp-dis.c, * nios2-dis.c,
* ppc-dis.c, * riscv-dis.c, * score-dis.c, * score7-dis.c,
* tic6x-dis.c, * v850-dis.c, * vax-dis.c, * wasm32-dis.c,
* xtensa-dis.c: Replace bfd_boolean with bool, FALSE with false,
and TRUE with true throughout.
|
|
cpu/
* frv.opc (frv_is_branch_major, frv_is_float_major),
(frv_is_media_major, frv_is_branch_insn, frv_is_float_insn),
(frv_is_media_insn, spr_valid): Correct prototypes.
include/
* opcode/aarch64.h (aarch64_opcode_encode): Correct prototype.
opcodes/
* arc-dis.c (extract_operand_value): Correct NULL cast.
* frv-opc.h: Regenerate.
|
|
|
|
|
|
Add gas and opcodes support for two xBPF-exclusive ALU operations:
SDIV (signed division) and SMOD (signed modulo), and add tests for
them in gas.
cpu/
* bpf.cpu (insn-op-code-alu): Add SDIV and SMOD.
(define-alu-insn-bin, daib): Take ISAs as an argument.
(define-alu-instructions): Update calls to daib pmacro with
ISAs; add sdiv and smod.
gas/
* testsuite/gas/bpf/alu-xbpf.d: New file.
* testsuite/gas/bpf/alu-xbpf.s: Likewise.
* testsuite/gas/bpf/alu32-xbpf.d: Likewise.
* testsuite/gas/bpf/alu32-xbpf.d: Likewise.
* testuiste/gas/bpf/bpf.exp: Run new tests.
opcodes/
* bpf-desc.c: Regenerate.
* bpf-desc.h: Likewise.
* bpf-opc.c: Likewise.
* bpf-opc.h: Likewise.
|
|
The div and mod eBPF instructions are unsigned, but the semantic
specification for the simulator incorrectly used signed operators.
Correct them to unsigned versions, and correct the ALU tests in
the simulator (which incorrectly assumed signed semantics).
Tested in bpf-unknown-none.
cpu/ChangeLog:
2020-09-08 David Faust <david.faust@oracle.com>
* bpf.cpu (define-alu-instructions): Correct semantic operators
for div, mod to unsigned versions.
sim/ChangeLog:
2020-09-08 David Faust <david.faust@oracle.com>
* bpf/sem-be.c: Regenerate.
* bpf/sem-le.c: Likewise.
sim/testsuite/ChangeLog:
2020-09-08 David Faust <david.faust@oracle.com>
* sim/bpf/alu.s: Correct div and mod tests.
* sim/bpf/alu32.s: Likewise.
|
|
cpu/
* mep-core.cpu (f-8s8a2, f-12s4a2, f-17s16a2): Multiply signed
value by two rather than shifting left.
(f-24s5a2n): Similarly multiply signed f-24s5a2n-hi to extract.
opcodes/
* mep-ibld.c: Regenerate.
|
|
This patch adds support for xBPF, another ISA targetting the BPF
virtual architecture. For now, the primary difference between eBPF
and xBPF is that xBPF supports indirect calls through the
'call %reg' form of the call instruction.
bfd/
* archures.c (bfd_mach_xbpf): Define.
* bfd-in2.h: Regenerate.
* cpu-bpf.c (bfd_xbpf_arch) New.
(bfd_bpf_arch) Update next in list field to point to xbpf arch.
cpu/
* bpf.cpu (arch bpf): Add xbpf mach and isas.
(define-xbpf-isa) New pmacro.
(all-isas) Add xbpfle,xbpfbe.
(endian-isas): New pmacro.
(mach xbpf): New.
(model xbpf-def): Likewise.
(h-gpr): Add xbpf mach.
(f-dstle, f-srcle, dstle, srcle): Add xbpfle isa.
(f-dstbe, f-srcbe, dstbe, srcbe): Add xbpfbe isa.
(define-alu-insn-un): Use new endian-isas pmacro.
(define-alu-insn-bin, define-alu-insn-mov): Likewise.
(define-endian-insn, define-lddw): Likewise.
(dlind, dxli, dxsi, dsti): Likewise.
(define-cond-jump-insn, define-call-insn): Likewise.
(define-atomic-insns): Likewise.
gas/
* config/tc-bpf.c: Add option -mxbpf to select xbpf isa.
* testsuite/gas/bpf/indcall-1.d: New file.
* testsuite/gas/bpf/indcall-1.s: Likewise.
* testsuite/gas/bpf/indcall-bad-1.l: Likewise.
* testsuite/gas/bpf/indcall-bad-1.s: Likewise.
* testsuite/gas/bpf/bpf.exp: Run new tests.
opcodes/
* bpf-desc.c: Regenerate.
* bpf-desc.h: Likewise.
* bpf-opc.c: Likewise.
* bpf-opc.h: Likewise.
* disassemble.c (disassemble_init_for_target): Set bits for xBPF
ISA when appropriate.
|
|
|
|
Correct the type of the offset16 field to HI, and simplify memory
accesses which use it. Also update c-calls in semantics for a
few instructions.
cpu/ChangeLog:
2020-06-25 David Faust <david.faust@oracle.com>
* bpf.cpu (f-offset16): Change type from INT to HI.
(dxli): Simplify memory access.
(dxsi): Likewise.
(define-endian-insn): Update c-call in semantics.
(dlabs) Likewise.
(dlind) Likewise.
|
|
cpu/ChangeLog:
2020-06-02 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (define-bpf-isa): Set base-insn-bitsize to 64.
* bpf.opc (bpf_print_insn): Do not set endian_code here.
gas/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-bpf.c (md_begin): Pass CGEN_CPU_OPEN_INSN_ENDIAN to
bpf_cgen_cpu_open.
(md_assemble): Remove no longer needed hack.
opcodes/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* disassemble.c (disassemble_init_for_target): Set endian_code for
bpf targets.
* bpf-desc.c: Regenerate.
* bpf-opc.c: Likewise.
* bpf-dis.c: Likewise.
|
|
The CGEN support code in opcodes accesses instruction contents using a
couple of functions defined in cgen-opc.c: cgen_get_insn_value and
cgen_put_insn_value. These functions use the "instruction endianness"
in the CPU description to order the read/written bytes.
The process of writing an instruction to the object file is:
a) cgen_put_insn_value ;; Writes out the opcodes.
b) ARCH_cgen_insert_operand
insert_normal
insert_1
cgen_put_insn_value ;; Writes out the bytes of the
;; operand.
Likewise, the process of reading an instruction from the object file
is:
a) cgen_get_insn_value ;; Reads the opcodes.
b) ARCH_cgen_extract_operand
extract_normal
extract_1
cgen_get_insn_value ;; Reads in the bytes of the
;; operand.
As can be seen above, cgen_{get,put}_insn_value are used to both
process the instruction opcodes (the constant fields conforming the
base instruction) and also the values of the instruction operands,
such as immediates.
This is problematic for architectures in which the endianness of
instructions is different to the endianness of data. An example is
BPF, where instructions are always encoded big-endian but the data may
be either big or little.
This patch changes the cgen_{get,put}_insn_value functions in order to
get an extra argument with the endianness to use, and adapts the
existin callers to these functions in order to provide cd->endian or
cd->insn_endian, whatever appropriate. Callers like extract_1 and
insert_1 pass cd->endian (since they are reading/writing operand
values) while callers reading/writing the base instruction pass
cd->insn_endian instead.
A few little adjustments have been needed in some existing CGEN based
ports:
* The BPF assembler uses cgen_put_insn_value. It has been adapted to
pass the new endian argument.
* The mep port has code in mep.opc that uses cgen_{get,put}_insn_value.
It has been adapted to pass the new endianargument. Ditto for a
call in the assembler.
Tested with --enable-targets=all.
Regested in all supported targets.
No regressions.
include/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/cgen.h: Get an `endian' argument in both
cgen_get_insn_value and cgen_put_insn_value.
opcodes/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* cgen-opc.c (cgen_get_insn_value): Get an `endian' argument.
(cgen_put_insn_value): Likewise.
(cgen_lookup_insn): Pass endianness to cgen_{get,put}_insn_value.
* cgen-dis.in (print_insn): Likewise.
* cgen-ibld.in (insert_1): Likewise.
(insert_1): Likewise.
(insert_insn_normal): Likewise.
(extract_1): Likewise.
* bpf-dis.c: Regenerate.
* bpf-ibld.c: Likewise.
* bpf-ibld.c: Likewise.
* cgen-dis.in: Likewise.
* cgen-ibld.in: Likewise.
* cgen-opc.c: Likewise.
* epiphany-dis.c: Likewise.
* epiphany-ibld.c: Likewise.
* fr30-dis.c: Likewise.
* fr30-ibld.c: Likewise.
* frv-dis.c: Likewise.
* frv-ibld.c: Likewise.
* ip2k-dis.c: Likewise.
* ip2k-ibld.c: Likewise.
* iq2000-dis.c: Likewise.
* iq2000-ibld.c: Likewise.
* lm32-dis.c: Likewise.
* lm32-ibld.c: Likewise.
* m32c-dis.c: Likewise.
* m32c-ibld.c: Likewise.
* m32r-dis.c: Likewise.
* m32r-ibld.c: Likewise.
* mep-dis.c: Likewise.
* mep-ibld.c: Likewise.
* mt-dis.c: Likewise.
* mt-ibld.c: Likewise.
* or1k-dis.c: Likewise.
* or1k-ibld.c: Likewise.
* xc16x-dis.c: Likewise.
* xc16x-ibld.c: Likewise.
* xstormy16-dis.c: Likewise.
* xstormy16-ibld.c: Likewise.
gas/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* cgen.c (gas_cgen_finish_insn): Pass the endianness to
cgen_put_insn_value.
(gas_cgen_md_apply_fix): Likewise.
(gas_cgen_md_apply_fix): Likewise.
* config/tc-bpf.c (md_apply_fix): Pass data endianness to
cgen_put_insn_value.
* config/tc-mep.c (mep_check_ivc2_scheduling): Pass endianness to
cgen_put_insn_value.
cpu/ChangeLog:
2020-06-02 Jose E. Marchesi <jose.marchesi@oracle.com>
* mep.opc (print_slot_insn): Pass the insn endianness to
cgen_get_insn_value.
|
|
This patch adds semantic RTL descriptions to the eBPF instructions
defined in cpu/bpf.cpu. It also contains a couple of minor
improvements.
Tested in bpf-unknown-none targets.
No regressions.
cpu/ChangeLog:
2020-05-28 Jose E. Marchesi <jose.marchesi@oracle.com>
David Faust <david.faust@oracle.com>
* bpf.cpu (define-alu-insn-un): Add definitions of semantics.
(define-alu-insn-mov): Likewise.
(daib): Likewise.
(define-alu-instructions): Likewise.
(define-endian-insn): Likewise.
(define-lddw): Likewise.
(dlabs): Likewise.
(dlind): Likewise.
(dxli): Likewise.
(dxsi): Likewise.
(dsti): Likewise.
(define-ldstx-insns): Likewise.
(define-st-insns): Likewise.
(define-cond-jump-insn): Likewise.
(dcji): Likewise.
(define-condjump-insns): Likewise.
(define-call-insn): Likewise.
(ja): Likewise.
("exit"): Likewise.
(define-atomic-insns): Likewise.
(sem-exchange-and-add): New macro.
* bpf.cpu ("brkpt"): New instruction.
(bpfbf): Set word-bitsize to 32 and insn-endian big.
(h-gpr): Prefer r0 to `a' and r6 to `ctx'.
(h-pc): Expand definition.
* bpf.opc (bpf_print_insn): Set endian_code to BIG.
opcodes/ChangeLog:
2020-05-28 Jose E. Marchesi <jose.marchesi@oracle.com>
David Faust <david.faust@oracle.com>
* bpf-desc.c: Regenerate.
* bpf-opc.h: Likewise.
* bpf-opc.c: Likewise.
* bpf-dis.c: Likewise.
|
|
cpu/
* mep.opc (mep_cgen_expand_macros_and_parse_operand): Replace
"if (x) free (x)" with "free (x)".
opcodes/
* arc-ext.c: Replace "if (x) free (x)" with "free (x)" throughout.
* sparc-dis.c: Likewise.
* tic4x-dis.c: Likewise.
* xtensa-dis.c: Likewise.
* bpf-desc.c: Regenerate.
* epiphany-desc.c: Regenerate.
* fr30-desc.c: Regenerate.
* frv-desc.c: Regenerate.
* ip2k-desc.c: Regenerate.
* iq2000-desc.c: Regenerate.
* lm32-desc.c: Regenerate.
* m32c-desc.c: Regenerate.
* m32r-desc.c: Regenerate.
* mep-asm.c: Regenerate.
* mep-desc.c: Regenerate.
* mt-desc.c: Regenerate.
* or1k-desc.c: Regenerate.
* xc16x-desc.c: Regenerate.
* xstormy16-desc.c: Regenerate.
|
|
Reported by Rich Felker when building on 32-bit hosts. Backwards jump
negative offsets were not calculated correctly due to improper 32-bit
to 64-bit zero-extension. The 64-bit fields are present because we
are mixing 32-bit and 64-bit architectures in our cpu descriptions.
Removing 64-bit fixes the issue. We don't use 64-bit, there is an architecture
spec for 64-bit but no implementations or simulators. My thought is if
we need them in the future we should do the proper work to support both
32-bit and 64-bit implementations co-existing then.
cpu/ChangeLog:
yyyy-mm-dd Stafford Horne <shorne@gmail.com>
PR 25184
* or1k.cpu (arch or1k): Remove or64 and or64nd machs.
(ORBIS-MACHS, ORFPX32-MACHS): Remove pmacros.
(cpu or1k64bf, mach or64, mach or64nd): Remove definitions.
* or1kcommon.cpu (h-fdr): Remove hardware.
* or1korfpx.cpu (rDDF, rADF, rBDF): Remove operand definitions.
(float-regreg-insn): Remove lf- mnemonic -d instruction pattern.
(float-setflag-insn-base): Remove lf-sf mnemonic -d pattern.
(float-cust-insn): Remove "lf-cust" cust-num "-d" pattern.
(lf-rem-d, lf-itof-d, lf-ftoi-d, lf-madd-d): Remove.
|
|
Add support for the JMP32 class of eBPF instructions.
cpu/ChangeLog
* bpf.cpu (define-cond-jump-insn): Renamed from djci.
(dcji) New version with support for JMP32
gas/ChangeLog
* testsuite/gas/bpf/bpf.exp: Run jump32 tests.
* testsuite/gas/bpf/jump32.s: New file.
* testsuite/gas/bpf/jump32.d: Likewise.
opcodes/ChangeLog
* bpf-desc.c: Regenerate.
* bpf-desc.h: Likewise.
* bpf-opc.c: Regenerate.
* bpf-opc.h: Likewise.
|
|
cpu/
* m32c.cpu (f-dsp-64-s16): Mask before shifting signed value.
opcodes/
* m32c-ibld.c: Regenerate.
|
|
More non-bugs flagged by ubsan, unless you happen to be compiling for
a 1's complement host.
cpu/
* frv.cpu (f-u12): Multiply rather than left shift signed values.
(f-label16, f-label24): Likewise.
opcodes/
* frv-ibld.c: Regenerate.
|
|
More nonsense fixing "bugs" with left shifts of signed values. Yes,
the C standard does say this is undefined (and right shifts of signed
values are implementation defined BTW) but in practice there is no
problem with current machines. 1's complement is a thing of the past.
cpu/
* m32c.cpu (f-src32-rn-unprefixed-QI): Shift before inverting.
(f-src32-rn-prefixed-QI, f-dst32-rn-unprefixed-QI): Likewise.
(f-dst32-rn-prefixed-QI): Likewise.
(f-dsp-32-s32): Mask before shifting left.
(f-dsp-48-u32, f-dsp-48-s32): Likewise.
(f-bitbase32-16-s11-unprefixed): Multiply signed field rather than
shifting left.
(f-bitbase32-24-s11-prefixed, f-bitbase32-24-s19-prefixed): Likewise.
(h-gr-SI): Mask before shifting.
opcodes/
* m32c-ibld.c: Regenerate.
|
|
This patch fixes the neg/neg32 BPF instructions, which have K (=0)
instead of X (=1) in their header source bit, despite operating on
registes.
cpu/ChangeLog:
2020-01-30 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (define-alu-insn-un): The unary BPF instructions
(neg and neg32) use OP_SRC_K even if they operate only in
registers.
opcodes/ChangeLog:
2020-01-30 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-opc.c: Regenerate.
gas/ChangeLog:
2020-01-30 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/alu.d: Update expected opcode for `neg'.
* testsuite/gas/bpf/alu-be.d: Likewise.
* testsuite/gas/bpf/alu32.d: Likewise for `neg32'.
* testsuite/gas/bpf/alu32-be.d: Likewise.
|
|
|
|
cpu/
* fr30.cpu (f-disp9, f-disp10, f-s10, f-rel9, f-rel12): Don't
left shift signed values.
opcodes/
* fr30-ibld.c: Regenerate.
|
|
There are probably a lot more of these still here.
cpu/
* m32c.cpu (f-dsp-8-u16, f-dsp-8-s16): Rearrange to mask any sign
bits before shifting rather than masking after shifting.
(f-dsp-16-u16, f-dsp-16-s16, f-dsp-32-u16, f-dsp-32-s16): Likewise.
(f-dsp-40-u16, f-dsp-40-s16, f-dsp-48-u16, f-dsp-48-s16): Likewise.
(f-dsp-64-u16, f-dsp-8-s24): Likewise.
(f-bitbase32-16-s19-unprefixed): Avoid signed left shift.
opcodes/
* m32c-ibld.c: Regenerate.
|
|
cpu/
* m32r.cpu (f-disp8): Avoid left shift of negative values.
(f-disp16, f-disp24): Likewise.
opcodes/
* m32r-ibld.c: Regenerate.
|
|
cpu/
* iq2000.cpu (f-offset): Avoid left shift of negative values.
opcodes/
* iq2000-ibld.c: Regenerate.
|
|
cpu/
* or1korbis.cpu (f-disp26, f-disp21): Don't left shift negative values.
opcodes/
* or1k-ibld.c: Regenerate.
|
|
cpu/
* bpf.cpu (f-imm64): Avoid signed overflow.
opcodes/
* bpf-ibld.c: Regenerate.
|
|
cpu/
* xstormy16.cpu (f-rel12a): Avoid signed overflow.
opcodes/
* xstormy16-ibld.c: Regenerate.
|
|
cpu/
* epiphany.cpu (f-sdisp11): Don't sign extend with shifts.
* lm32.cpu (f-branch, f-vall): Likewise.
* m32.cpu (f-lab-8-16): Likewise.
opcodes/
* arc-dis.c (BITS): Don't truncate high bits with shifts.
* nios2-dis.c (nios2_print_insn_arg): Don't sign extend with shifts.
* tic54x-dis.c (print_instruction): Likewise.
* tilegx-opc.c (parse_insn_tilegx): Likewise.
* tilepro-opc.c (parse_insn_tilepro): Likewise.
* visium-dis.c (disassem_class0): Likewise.
* pdp11-dis.c (sign_extend): Likewise.
(SIGN_BITS): Delete.
* epiphany-ibld.c: Regenerate.
* lm32-ibld.c: Regenerate.
* m32c-ibld.c: Regenerate.
|
|
Two places in epiphany_cgen_extract_operand, "value" is a long.
value = ((((value) << (1))) + (pc));
cpu/
* epiphany.cpu (f-simm8, f-simm24): Use multiply rather than
shift left to avoid UB on left shift of negative values.
opcodes/
* epiphany-ibld.c: Regenerate.
|
|
2019-11-20 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu: Fix comment describing the 128-bit instruction format.
|
|
|
