| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Always delete $testarchive first so that it exists only when it is
supported,
* testsuite/binutils-all/objdump.exp: Always delete $testarchive
first.
|
|
Correct a commit 7d64c587c15f ("Add support for the MIPS eXtended
Physical Address (XPA) ASE.") bug, causing XPA base and Virtualization
ASE instructions to be wrongly always enabled with the selection of the
MIPS32r2 or higher ISA.
For example this source assembles successfully as shown below:
$ cat xpa.s
mfhc0 $2, $1
$ as -32 -mips32 -o xpa.o xpa.s
xpa.s: Assembler messages:
xpa.s:1: Error: opcode not supported on this processor: mips32 (mips32) `mfhc0 $2,$1'
$ as -32 -mips32r2 -o xpa.o xpa.s
$ objdump -d xpa.o
xpa.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <.text>:
0: 40420800 mfhc0 v0,c0_random
...
$
To address this issue remove the I33 (INSN_ISA32R2) marking from all XPA
instructions in the opcode table. Additionally, for XPA Virtualization
ASE instructions implement an XPAVZ (ASE_XPA_VIRT) combination ASE flag
and use it in place of IVIRT|XPA (ASE_VIRT|ASE_XPA).
Now the same source is correctly rejected unless the `-mxpa' option is
also used:
$ as -32 -mips32r2 -o xpa.o xpa.s
xpa.s: Assembler messages:
xpa.s:1: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mfhc0 $2,$1'
$ as -32 -mips32r2 -mxpa -o xpa.o xpa.s
$
Add test cases for XPA base and XPA Virtualization ASE instructions.
Parts of this change by Andrew Bennett.
include/
* opcode/mips.h (ASE_XPA_VIRT): New macro.
opcodes/
* mips-dis.c (mips_calculate_combination_ases): Handle the
ASE_XPA_VIRT flag.
(parse_mips_ase_option): New function.
(parse_mips_dis_option): Factor out ASE option handling to the
new function. Call `mips_calculate_combination_ases'.
* mips-opc.c (XPAVZ): New macro.
(mips_builtin_opcodes): Correct ISA and ASE flags for "mfhc0",
"mfhgc0", "mthc0" and "mthgc0".
gas/
* config/tc-mips.c (mips_set_ase): Handle the ASE_XPA_VIRT flag.
* testsuite/gas/mips/xpa.d: Remove `xpa' from `-M' in `objdump'
flags. Add `-mvirt' to `as' flags.
* testsuite/gas/mips/xpa-err.d: New test.
* testsuite/gas/mips/xpa-virt-err.d: New test.
* testsuite/gas/mips/xpa-err.l: New stderr output.
* testsuite/gas/mips/xpa-virt-err.l: New stderr output.
* testsuite/gas/mips/xpa-err.s: New test source.
* testsuite/gas/mips/xpa-virt-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
binutils/
* testsuite/binutils-all/mips/mips-xpa-virt-1.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-2.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-3.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-4.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
|
|
There is a bug in handling of cpu=... disassembler option in case there are
other options after it, for example, `cpu=EM,dsp'. In this case `EM,dsp' is
treated as an option value, and strcasecmp reports is as non-equal to "EM".
This is fixed by using disassembler_options_cmp function, which compares string
treating `,' the same way as `\0'.
This function also solves a problem with option order in parse_option.
Previously, if several option had same prefix (e.g. fpud, fpuda), then the
longer one should have been compared first, otherwise when longer option is
passed it would be treated as a short one, because
CONST_STRNEQ ("fpud", "fpuda")
would be true. The order of options was correct for ARC, so there were no
bugs per se, but with disassembler_option_cmp there is no risk of such a bug
being introduced in the future.
opcodes/ChangeLog:
yyyy-mm-dd Anton Kolesov <Anton.Kolesov@synopsys.com>
* arc-dis.c (parse_option): Use disassembler_options_cmp to compare
disassembler option strings.
(parse_cpu_option): Likewise.
binutils/ChangeLog
yyyy-mm-dd Anton Kolesov <Anton.Kolesov@synopsys.com>
* testsuite/binutils-all/arc/double_store.s: New file.
* testsuite/binutils-all/arc/objdump.exp: Tests for disassembler
options.
(do_objfile): New function.
(check_assembly): Likewise.
|
|
To support Intel Shadow Stack (SHSTK) in Intel Control-flow Enforcement
Technology (CET) instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_SHSTK (1U << 1)
is added to GNU program properties to indicate that all executable sections
are compatible with SHSTK where return address popped from shadow stack
always matches return address popped from normal stack.
GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on output only if it is set on all
relocatable inputs.
bfd/
* elf32-i386.c (elf_i386_merge_gnu_properties): If info->shstk
is set, turn on GNU_PROPERTY_X86_FEATURE_1_SHSTK.
(elf_i386_link_setup_gnu_properties): If info->shstk is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT.
* elf64-x86-64.c (elf_x86_64_merge_gnu_properties): If
info->shstk is set, turn on GNU_PROPERTY_X86_FEATURE_1_SHSTK.
(elf_x86_64_link_setup_gnu_properties): If info->shstk is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT.
binutils/
* readelf.c (decode_x86_feature): Decode
GNU_PROPERTY_X86_FEATURE_1_SHSTK.
* testsuite/binutils-all/i386/shstk.d: New file.
* testsuite/binutils-all/i386/shstk.s: Likewise.
* testsuite/binutils-all/x86-64/shstk-x32.d: Likewise.
* testsuite/binutils-all/x86-64/shstk.d: Likewise.
* testsuite/binutils-all/x86-64/shstk.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add shstk.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_SHSTK): New.
ld/
* NEWS: Mention -z shstk and GNU_PROPERTY_X86_FEATURE_1_SHSTK.
* emulparams/cet.sh (PARSE_AND_LIST_OPTIONS_CET): Add "-z shstk".
(PARSE_AND_LIST_ARGS_CASE_Z_CET): Support "-z shstk".
* ld.texinfo: Document -z shstk.
* testsuite/ld-i386/i386.exp: Run SHSTK tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/property-x86-shstk.s: New file.
* testsuite/ld-i386/property-x86-shstk1a.d: Likewise.
* testsuite/ld-i386/property-x86-shstk1b.d: Likewise.
* testsuite/ld-i386/property-x86-shstk2.d: Likewise.
* testsuite/ld-i386/property-x86-shstk3a.d: Likewise.
* testsuite/ld-i386/property-x86-shstk3b.d: Likewise.
* testsuite/ld-i386/property-x86-shstk4.d: Likewise.
* testsuite/ld-i386/property-x86-shstk5.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk.s: Likewise.
* testsuite/ld-x86-64/property-x86-shstk1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk2.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk4.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-shstk5.d: Likewise.
|
|
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002
#define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)
are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.
GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.
The followings changes are made to the Procedure Linkage Table (PLT):
1. For 64-bit x86-64, PLT is changed to
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
...
PLTn: endbr64
push namen_reloc_index
bnd jmp PLT0
together with the second PLT section:
PLTn: endbr64
bnd jmp *GOT[namen_index]
nop
BND prefix is also added so that IBT-enabled PLT is compatible with MPX.
2. For 32-bit x86-64 (x32) and i386, PLT is changed to
PLT0: push GOT[1]
jmp *GOT[2]
nop
...
PLTn: endbr64 # endbr32 for i386.
push namen_reloc_index
jmp PLT0
together with the second PLT section:
PLTn: endbr64 # endbr32 for i386.
jmp *GOT[namen_index]
nop
BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.
GOT is an array of addresses. Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section. The function, namen, is called via the
ENDBR instruction in the second PLT entry. GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.
2 linker command line options are added:
1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.
bfd/
* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT. Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT. Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
binutils/
* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.
ld/
* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
|
|
We can't use stat() to get archive element size. Add bfd_get_file_size
to get size for both normal files and archive elements.
bfd/
PR binutils/21519
* bfdio.c (bfd_get_file_size): New function.
* bfd-in2.h: Regenerated.
binutils/
PR binutils/21519
* objdump.c (dump_relocs_in_section): Replace get_file_size
with bfd_get_file_size to get archive element size.
* testsuite/binutils-all/objdump.exp (test_objdump_f): New
proc.
(test_objdump_h): Likewise.
(test_objdump_t): Likewise.
(test_objdump_r): Likewise.
(test_objdump_s): Likewise.
Add objdump tests on archive.
|
|
Revert parts of commit fee24f1c5bfe ("objdump improvements for mips
elf64"), <https://sourceware.org/ml/binutils/2003-03/msg00108.html>, and
make the `->reloc_count' member of `struct bfd_section' hold the actual
number of internal relocations stored in its `->relocation' vector. To
do so adjust `mips_elf64_slurp_one_reloc_table' to set `->reloc_count'
to the actual number of internal relocations retrieved and discard
`mips_elf64_canonicalize_reloc', `mips_elf64_canonicalize_dynamic_reloc'
and their corresponding target macros. Contrary to the description of
`mips_elf64_slurp_one_reloc_table', adjusted appropriately, this makes
generic relocation processing code happy and satisfies the "merge notes
section" binutils test case.
Add extra binutils test cases to expand the coverage of the generic
"merge notes section" test case, now passing with the n64 ABI, across
the MIPS o32, n32 and n64 ABIs regardless of the default ABI selected in
target configuration, and also to verify correctness of the relocations
produced. Conversely, do not provide any additional test cases for the
original issue addressed with the commit referred:
- objdump would display only 1/3 of the total number of relocations,
because it used the external relocation count, but each external
relocation is brought in as 3 internal relocations.
as n64 ABI relocation processing with `objdump -r' and `objdump -R' is
already widely covered across the GAS and LD test suites.
bfd/
* elf64-mips.c (mips_elf64_canonicalize_reloc): Remove prototype
and function.
(mips_elf64_canonicalize_dynamic_reloc): Likewise.
(mips_elf64_slurp_one_reloc_table): Set `reloc_count' to the
actual number of internal relocations retrieved. Adjust
function description.
(bfd_elf64_canonicalize_reloc): Remove macro.
(bfd_elf64_canonicalize_dynamic_reloc): Likewise.
binutils/
* testsuite/binutils-all/mips/mips-note-2.d: New test.
* testsuite/binutils-all/mips/mips-note-2r.d: New test.
* testsuite/binutils-all/mips/mips-note-2-n32.d: New test.
* testsuite/binutils-all/mips/mips-note-2-n64.d: New test.
* testsuite/binutils-all/mips/mips-note-2r-n32.d: New test.
* testsuite/binutils-all/mips/mips-note-2r-n64.d: New test.
* testsuite/binutils-all/mips/mips.exp: Define `has_newabi'.
Run the new tests.
|
|
Complement commit 89210bdc8fd2 ("GAS: Permit the reuse of dump
patterns"), <https://sourceware.org/ml/binutils/2010-07/msg00269.html>,
and commit ef2b5578f693 ("MIPS: Enable NewABI tests for SDE targets"),
<https://sourceware.org/ml/binutils/2012-08/msg00017.html>, and like the
GAS and LD versions make the binutils version of `run_dump_test' also
support the `dump' keyword, for reusing dump patterns between tests.
binutils/
* testsuite/lib/utils-lib.exp (run_dump_test): Handle the `dump'
option.
|
|
We have but ELF binutils tests in the MIPS subset, and non-ELF MIPS/GAS
ports are gone, making a future addition of any non-ELF tests unlikely.
Bail out right away then if non-ELF, consuming one level of indentation
across the actual tests run.
binutils/
* testsuite/binutils-all/mips/mips.exp: Bail out right away if
non-ELF.
|
|
Verify MIPS16e2 ASE instruction assembly, disassembly and object file
flags.
binutils/
* testsuite/binutils-all/mips/mips16-undecoded.d: Add `-mips3'
to `as' flags.
* testsuite/binutils-all/mips/mips16e2-undecoded.d: New test.
* testsuite/binutils-all/mips/mips16e2-extend-insn.d: New test.
* testsuite/binutils-all/mips/mips16-undecoded.s: Remove
`.module mips3'.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* testsuite/gas/mips/mips16e2.d: New test.
* testsuite/gas/mips/mips16e2-mt.d: New test.
* testsuite/gas/mips/mips16e2-sub.d: New test.
* testsuite/gas/mips/mips16e2@mips16e2-sub.d: New test.
* testsuite/gas/mips/mips16e2-mt-sub.d: New test.
* testsuite/gas/mips/mips16e2@mips16e2-mt-sub.d: New test.
* testsuite/gas/mips/mips16e2-hilo.d: New test.
* testsuite/gas/mips/mips16e2-hilo-n32.d: New test.
* testsuite/gas/mips/mips16e2-reloc-error.d: New test.
* testsuite/gas/mips/mips16e2-imm-error.d: New test.
* testsuite/gas/mips/elf_ase_mips16e2.d: New test.
* testsuite/gas/mips/elf_ase_mips16e2-2.d: New test.
* testsuite/gas/mips/elf-rel9-mips16e2.d: New test.
* testsuite/gas/mips/mips16e2-lui.d: New test.
* testsuite/gas/mips/mips16e2@mips32r2-sync.d: New test.
* testsuite/gas/mips/mips16e2@mips32r2-sync-1.d: New test.
* testsuite/gas/mips/mips16e2@lui-2.d: New test.
* testsuite/gas/mips/mips16e2-reloc-error.l: New stderr output.
* testsuite/gas/mips/mips16e2-imm-error.l: New stderr output.
* testsuite/gas/mips/mips16e2@lui-2.l: New stderr output.
* testsuite/gas/mips/mips16e2.s: New test source.
* testsuite/gas/mips/mips16e2-mt.s: New test source.
* testsuite/gas/mips/mips16e2-sub.s: New test source.
* testsuite/gas/mips/mips16e2-mt-sub.s: New test source.
* testsuite/gas/mips/mips16e2-hilo.s: New test source.
* testsuite/gas/mips/mips16e2-reloc-error.s: New test source.
* testsuite/gas/mips/mips16e2-imm-error.s: New test source.
* testsuite/gas/mips/elf-rel9-mips16e2.s: New test source.
* testsuite/gas/mips/mips16e2-lui.s: New test source.
* testsuite/gas/mips/mips.exp: Expand `mips32r2-sync',
`mips32r2-sync-1', `lui-1' and `lui-2' tests across MIPS16e2
architectures. Run the new tests.
|
|
Disassemble the MIPS16 BREAK and SDBBP instruction's immediate operand
in the hexadecimal rather than decimal numeral system and add respective
operandless variants with an implicit 0 operand, making our handling of
these instructions consistent with how we have processed their regular
MIPS and microMIPS counterparts since forever.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'6'>: Switch the operand
type to hexadecimal.
(mips16_opcodes): Add operandless "break" and "sdbbp" entries.
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: Adjust BREAK
and SDBBP disassembly.
gas/
* testsuite/gas/mips/mips16.d: Adjust BREAK disassembly.
* testsuite/gas/mips/mips16-64@mips16.d: Likewise.
* testsuite/gas/mips/mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-64@mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-macro.d: Likewise.
* testsuite/gas/mips/mips16-64@mips16-macro.d: Likewise.
* testsuite/gas/mips/mips16-sub.d: Likewise.
* testsuite/gas/mips/mips16-32@mips16-sub.d: Likewise.
|
|
Define `tempfile' and `copyfile' in `mips.exp' so that standalone script
execution via `RUNTESTFLAGS=mips.exp' works rather than producing:
Running .../binutils/testsuite/binutils-all/mips/mips.exp ...
ERROR: tcl error sourcing
.../binutils/testsuite/binutils-all/mips/mips.exp.
ERROR: can't read "tempfile": no such variable
while executing
"binutils_assemble_flags ${srcfile} $tempfile $opts(as)"
(procedure "run_dump_test" line 207)
invoked from within
"run_dump_test "mips-ase-1""
invoked from within
"if [is_elf_format] {
run_dump_test "mips-ase-1"
run_dump_test "mips-ase-2"
run_dump_test "mips-ase-3"
run_dump_test "mixed-mips16"
..."
(file ".../binutils/testsuite/binutils-all/mips/mips.exp" line 22)
invoked from within
"source .../binutils/testsuite/binutils-all/mips/mips.exp"
("uplevel" body line 1)
invoked from within
"uplevel #0 source .../binutils/testsuite/binutils-all/mips/mips.exp"
invoked from within
"catch "uplevel #0 source $test_file_name""
testcase .../binutils/testsuite/binutils-all/mips/mips.exp completed in 0 seconds
binutils/
* testsuite/binutils-all/mips/mips.exp: Define `tempfile' and
`copyfile' variables.
|
|
gas/
2017-05-10 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/attr-arc600.d: New file.
* testsuite/gas/arc/attr-arc600_mul32x16.d: Likewise.
* testsuite/gas/arc/attr-arc600_norm.d: Likewise.
* testsuite/gas/arc/attr-arc601.d: Likewise.
* testsuite/gas/arc/attr-arc601_mul32x16.d: Likewise.
* testsuite/gas/arc/attr-arc601_mul64.d: Likewise.
* testsuite/gas/arc/attr-arc601_norm.d: Likewise.
* testsuite/gas/arc/attr-arc700.d: Likewise.
* testsuite/gas/arc/attr-arcem.d: Likewise.
* testsuite/gas/arc/attr-archs.d: Likewise.
* testsuite/gas/arc/attr-autodetect-1.d: Likewise.
* testsuite/gas/arc/attr-autodetect-1.s: Likewise.
* testsuite/gas/arc/attr-cpu-a601.d: Likewise.
* testsuite/gas/arc/attr-cpu-a601.s: Likewise.
* testsuite/gas/arc/attr-cpu-a700.d: Likewise.
* testsuite/gas/arc/attr-cpu-a700.s: Likewise.
* testsuite/gas/arc/attr-cpu-em.d: Likewise.
* testsuite/gas/arc/attr-cpu-em.s: Likewise.
* testsuite/gas/arc/attr-cpu-hs.d: Likewise.
* testsuite/gas/arc/attr-cpu-hs.s: Likewise.
* testsuite/gas/arc/attr-em.d: Likewise.
* testsuite/gas/arc/attr-em4.d: Likewise.
* testsuite/gas/arc/attr-em4_dmips.d: Likewise.
* testsuite/gas/arc/attr-em4_fpuda.d: Likewise.
* testsuite/gas/arc/attr-em4_fpus.d: Likewise.
* testsuite/gas/arc/attr-hs.d: Likewise.
* testsuite/gas/arc/attr-hs34.d: Likewise.
* testsuite/gas/arc/attr-hs38.d: Likewise.
* testsuite/gas/arc/attr-hs38_linux.d: Likewise.
* testsuite/gas/arc/attr-mul64.d: Likewise.
* testsuite/gas/arc/attr-name.d: Likewise.
* testsuite/gas/arc/attr-name.s: Likewise.
* testsuite/gas/arc/attr-nps400.d: Likewise.
* testsuite/gas/arc/attr-override-mcpu.d: Likewise.
* testsuite/gas/arc/attr-override-mcpu.s
* testsuite/gas/arc/attr-quarkse_em.d: Likewise.
* testsuite/gas/arc/blank.s: Likewise.
* testsuite/gas/elf/section2.e-arc: Likewise.
* testsuite/gas/arc/cpu-pseudop-1.d: Update test.
* testsuite/gas/arc/cpu-pseudop-2.d: Likewise.
* testsuite/gas/arc/nps400-0.d: Likewise.
* testsuite/gas/elf/elf.exp: Set target_machine for ARC.
* config/tc-arc.c (opcode/arc-attrs.h): Include.
(ARC_GET_FLAG, ARC_SET_FLAG, streq): Define.
(arc_attribute): Declare new function.
(md_pseudo_table): Add arc_attribute.
(cpu_types): Rename default cpu features.
(selected_cpu): Set the default OSABI flag.
(mpy_option): New variable.
(pic_option): Likewise.
(sda_option): Likewise.
(tls_option): Likewise.
(feature_type, feature_list): Remove.
(arc_initial_eflag): Likewise.
(attributes_set_explicitly): New variable.
(arc_check_feature): Check also for the conflicting features.
(arc_select_cpu): Refactor assignment of selected_cpu.eflags.
(arc_option): Remove setting of private flags and architecture.
(check_cpu_feature): Refactor feature names.
(autodetect_attributes): New function.
(assemble_tokens): Use above function.
(md_parse_option): Refactor feature names.
(arc_attribute): New function.
(arc_set_attribute_int): Likewise.
(arc_set_attribute_string): Likewise.
(arc_stralloc): Likewise.
(arc_set_public_attributes): Likewise.
(arc_md_end): Likewise.
(arc_copy_symbol_attributes): Likewise.
(rc_convert_symbolic_attribute): Likewise.
* config/tc-arc.h (md_end): Define.
(CONVERT_SYMBOLIC_ATTRIBUTE): Likewise.
(TC_COPY_SYMBOL_ATTRIBUTES): Likewise.
* doc/c-arc.texi: Document ARC object attributes.
binutils/
2017-05-10 Claudiu Zissulescu <claziss@synopsys.com>
* readelf.c (decode_ARC_machine_flags): Recognize OSABI v4.
(get_arc_section_type_name): New function.
(get_section_type_name): Use the above function.
(display_arc_attribute): New function.
(process_arc_specific): Likewise.
(process_arch_specific): Handle ARC specific information.
* testsuite/binutils-all/strip-3.d: Consider ARC.attributes
section.
include/
2017-05-10 Claudiu Zissulescu <claziss@synopsys.com>
* elf/arc.h (SHT_ARC_ATTRIBUTES): Define.
(Tag_ARC_*): Define.
(E_ARC_OSABI_V4): Define.
(E_ARC_OSABI_CURRENT): Reassign it.
(TAG_CPU_*): Define.
* opcode/arc-attrs.h: New file.
* opcode/arc.h (insn_subclass_t): Assign enum values.
(insn_subclass_t): Update enum with QUARKSE1, QUARKSE2, and LL64.
(ARC_EA, ARC_CD, ARC_LLOCK, ARC_ATOMIC, ARC_MPY, ARC_MULT)
(ARC_NPS400, ARC_DPFP, ARC_SPFP, ARC_FPU, ARC_FPUDA, ARC_SWAP)
(ARC_NORM, ARC_BSCAN, ARC_UIX, ARC_TSTAMP, ARC_VBFDW)
(ARC_BARREL, ARC_DSPA, ARC_SHIFT, ARC_INTR, ARC_DIV, ARC_XMAC)
(ARC_CRC): Delete.
bfd/
2017-05-10 Claudiu Zissulescu <claziss@synopsys.com>
* elf32-arc.c (FEATURE_LIST_NAME): Define.
(CONFLICT_LIST): Likewise.
(opcode/arc-attrs.h): Include.
(arc_elf_print_private_bfd_data): Print OSABI v4 flag.
(arc_extract_features): New file.
(arc_stralloc): Likewise.
(arc_elf_merge_attributes): Likewise.
(arc_elf_merge_private_bfd_data): Use object attributes.
(bfd_arc_get_mach_from_attributes): New function.
(arc_elf_object_p): Use object attributes.
(arc_elf_final_write_processing): Likewise.
(elf32_arc_obj_attrs_arg_type): New function.
(elf32_arc_obj_attrs_handle_unknown): Likewise.
(elf32_arc_section_from_shdr): Likewise.
(elf_backend_obj_attrs_vendor): Define.
(elf_backend_obj_attrs_section): Likewise.
(elf_backend_obj_attrs_arg_type): Likewise.
(elf_backend_obj_attrs_section_type): Likewise.
(elf_backend_obj_attrs_handle_unknown): Likewise.
(elf_backend_section_from_shdr): Likewise.
ld/
2017-05-10 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/ld-arc/attr-merge-0.d: New file.
* testsuite/ld-arc/attr-merge-0.s: Likewise.
* testsuite/ld-arc/attr-merge-0e.s: Likewise.
* testsuite/ld-arc/attr-merge-1.d: Likewise.
* testsuite/ld-arc/attr-merge-1.s: Likewise.
* testsuite/ld-arc/attr-merge-1e.s: Likewise.
* testsuite/ld-arc/attr-merge-2.d: Likewise.
* testsuite/ld-arc/attr-merge-2.s: Likewise.
* testsuite/ld-arc/attr-merge-3.d: Likewise.
* testsuite/ld-arc/attr-merge-3.s: Likewise.
* testsuite/ld-arc/attr-merge-3e.s: Likewise.
* testsuite/ld-arc/attr-merge-4.s: Likewise.
* testsuite/ld-arc/attr-merge-5.d: Likewise.
* testsuite/ld-arc/attr-merge-5a.s: Likewise.
* testsuite/ld-arc/attr-merge-5b.s: Likewise.
* testsuite/ld-arc/attr-merge-conflict-isa.d: Likewise.
* testsuite/ld-arc/attr-merge-err-isa.d: Likewise.
* testsuite/ld-arc/attr-merge-incompatible-cpu.d: Likewise.
* testsuite/ld-arc/got-01.d: Update test.
* testsuite/ld-arc/attr-merge-err-quarkse.d: New file.
* testsuite/ld-arc/attr-quarkse.s: Likewise.
* testsuite/ld-arc/attr-quarkse2.s: Likewise.
opcodes/
2017-05-10 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (parse_option): Update quarkse_em option..
* arc-ext-tbl.h (dsp_fp_flt2i, dsp_fp_i2flt): Change subclass to
QUARKSE1.
(dsp_fp_div, dsp_fp_cmp): Change subclass to QUARKSE2.
|
|
Correct the disassembly of the PC-relative immediate argument of the
MIPS16 synthetic LA, LW, DLA and LD instructions and do not mask the
LSB, which in this case is a part of the data address rather than the
ISA bit and has to be fully presented.
opcodes/
* mips-dis.c (print_insn_arg): Only clear the ISA bit for jumps
and branches and not synthetic data instructions.
binutils/
* testsuite/binutils-all/mips/mips16-undecoded.d: Adjust the
disassembly of PC-relative LA and LW synthetic instructions.
|
|
* readelf.c (process_section_headers): Warn about overlarge
sections.
(print_gnu_build_attribute_name): Print the number of unrecognised
note types. Fix formatting in the presence of errors.
(testsuite/binutils-all/note-2-32.s): Fix encoding of numeric notes.
(testsuite/binutils-all/note-2-64.s): Likewise.
|
|
Complement commit 986e18a5a9fd ("Add a second 'pinfo' member to
mips_opcode to extend number of available bits"),
<https://sourceware.org/ml/binutils/2005-01/msg00261.html>, and annotate
MIPS16 NOP, LA, DLA and the synthetic forms of LD and LW instructions as
aliases. These correspond to MOVE, and the PC-relative ADDIU, DADDIU,
LD and LW hardware instructions respectively.
binutils/
* testsuite/binutils-all/mips/mips16-alias.d: New test.
* testsuite/binutils-all/mips/mips16-noalias.d: New test.
* testsuite/binutils-all/mips/mips16-alias.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
opcodes/
* mips16-opc.c (AL): New macro.
(mips16_opcodes): Mark "nop", "la", "dla", and synthetic forms
of "ld" and "lw" as aliases.
|
|
Mark an ALLOC section, which should be placed in special memory area,
with SHF_GNU_MBIND. Its sh_info field indicates the special memory
type. GNU_MBIND section names start with ".mbind" so that they are
placed as orphan sections by linker. All input GNU_MBIND sections
with the same sh_type, sh_flags and sh_info are placed in one output
GNU_MBIND section. In executable and shared object, create a
GNU_MBIND segment for each GNU_MBIND section and its segment type is
PT_GNU_MBIND_LO plus the sh_info value. Each GNU_MBIND segment is
aligned at page boundary.
The assembler syntax:
.section .mbind.foo,"adx",%progbits
^ 0: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.foo,"adx",%progbits,0x1
^ 1: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.bar,"adG",%progbits,.foo_group,comdat,0x2
^ 2: Special memory type.
|
'd' for SHF_GNU_MBIND.
bfd/
* elf.c (get_program_header_size): Add a GNU_MBIND segment for
each GNU_MBIND section and align GNU_MBIND section to page size.
(_bfd_elf_map_sections_to_segments): Create a GNU_MBIND
segment for each GNU_MBIND section.
(_bfd_elf_init_private_section_data): Copy sh_info from input
for GNU_MBIND section.
binutils/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* readelf.c (get_segment_type): Handle PT_GNU_MBIND_XXX.
(get_elf_section_flags): Handle SHF_GNU_MBIND.
(process_section_headers): Likewise.
* testsuite/binutils-all/mbind1.s: New file.
* testsuite/binutils-all/objcopy.exp: Run readelf test on
mbind1.s.
gas/
* NEWS: Mention support for ELF SHF_GNU_MBIND.
* config/obj-elf.c (section_match): New.
(get_section): Match both sh_info and group name.
(obj_elf_change_section): Add argument for sh_info. Pass both
sh_info and group name to get_section. Issue an error for
SHF_GNU_MBIND section without SHF_ALLOC. Set sh_info.
(obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'.
(obj_elf_section): Support SHF_GNU_MBIND section info.
* config/obj-elf.h (obj_elf_change_section): Add argument for
sh_info.
* config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texinfo: Document 'd' for SHF_GNU_MBIND.
* testsuite/gas/elf/elf.exp: Run section12a, section12b and
section13.
* testsuite/gas/elf/section10.d: Updated.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section12.s: New file.
* testsuite/gas/elf/section12a.d: Likewise.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.l: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.s: Likewise.
include/
* elf/common.h (PT_GNU_MBIND_NUM): New.
(PT_GNU_MBIND_LO): Likewise.
(PT_GNU_MBIND_HI): Likewise.
(SHF_GNU_MBIND): Likewise.
ld/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Place
input GNU_MBIND sections with the same type, attributes and
sh_info field into a single output GNU_MBIND section.
* testsuite/ld-elf/elf.exp: Run mbind2a and mbind2b.
* testsuite/ld-elf/mbind1.s: New file.
* testsuite/ld-elf/mbind1a.d: Likewise.
* testsuite/ld-elf/mbind1b.d: Likewise.
* testsuite/ld-elf/mbind1c.d: Likewise.
* testsuite/ld-elf/mbind2a.s: Likewise.
* testsuite/ld-elf/mbind2b.c: Likewise.
|
|
binutils * NEWS: Use "WebAssembly" consistently.
* testsuite/binutils-all/wasm32/wasm32.exp: Fix copyright notice.
|
|
gas and the binutils.
binutils * readelf.c: Add support for wasm32 ELF format WebAssembly files.
(guess_is_rela): Likewise.
(dump_relocations): Likewise.
(is_32bit_abs_reloc): Likewise.
(is_none_reloc_): Likewise.
* NEWS: Mention the new support.
* testsuite/lib/binutils-common.exp (is_elf_format): Mark wasm32
as ELF target.
(supports_gnu_unique): Mark wasm32 as supporting STB_GNU_UNIQUE.
* testsuite/binutils-all/nm.exp: Mark wasm32 as requiring .size annotations.
* testsuite/binutils-all/wasm32: New directory.
* testsuite/binutils-all/wasm32/create-wasm.d: New file.
* testsuite/binutils-all/wasm32/create-wasm.s: Likewise.
* testsuite/binutils-all/wasm32/custom-section.d: Likewise.
* testsuite/binutils-all/wasm32/custom-section.s: Likewise.
* testsuite/binutils-all/wasm32/invalid-wasm-1.d: Likewise.
* testsuite/binutils-all/wasm32/invalid-wasm-1.s: Likewise.
* testsuite/binutils-all/wasm32/long-sections.d: Likewise.
* testsuite/binutils-all/wasm32/long-sections.s: Likewise.
* testsuite/binutils-all/wasm32/parse-wasm.d: Likewise.
* testsuite/binutils-all/wasm32/parse-wasm.s: Likewise.
* testsuite/binutils-all/wasm32/parse-wasm-2.d: Likewise.
* testsuite/binutils-all/wasm32/parse-wasm-2.s: Likewise.
* testsuite/binutils-all/wasm32/prepared-section.d: Likewise.
* testsuite/binutils-all/wasm32/prepared-section.s: Likewise.
* testsuite/binutils-all/wasm32/wasm32.exp: New file, run tests.
gas * config/tc-wasm32.h: New file: Add WebAssembly assembler target.
* config/tc-wasm32.c: New file: Add WebAssembly assembler target.
* Makefile.am: Add WebAssembly assembler target.
* configure.tgt: Add WebAssembly assembler target.
* doc/c-wasm32.texi: New file: Start documenting WebAssembly
assembler.
* doc/all.texi: Define WASM32.
* doc/as.texinfo: Add WebAssembly entries.
* NEWS: Mention the new support.
* Makefile.in: Regenerate.
* po/gas.pot: Regenerate.
* po/POTFILES.in: Regenerate.
* testsuite/gas/wasm32: New directory.
* testsuite/gas/wasm32/allinsn.d: New file.
* testsuite/gas/wasm32/allinsn.s: New file.
* testsuite/gas/wasm32/illegal.l: New file.
* testsuite/gas/wasm32/illegal.s: New file.
* testsuite/gas/wasm32/illegal-2.l: New file.
* testsuite/gas/wasm32/illegal-2.s: New file.
* testsuite/gas/wasm32/illegal-3.l: New file.
* testsuite/gas/wasm32/illegal-3.s: New file.
* testsuite/gas/wasm32/illegal-4.l: New file.
* testsuite/gas/wasm32/illegal-4.s: New file.
* testsuite/gas/wasm32/illegal-5.l: New file.
* testsuite/gas/wasm32/illegal-5.s: New file.
* testsuite/gas/wasm32/illegal-6.l: New file.
* testsuite/gas/wasm32/illegal-6.s: New file.
* testsuite/gas/wasm32/illegal-7.l: New file.
* testsuite/gas/wasm32/illegal-7.s: New file.
* testsuite/gas/wasm32/illegal-8.l: New file.
* testsuite/gas/wasm32/illegal-8.s: New file.
* testsuite/gas/wasm32/illegal-9.l: New file.
* testsuite/gas/wasm32/illegal-9.s: New file.
* testsuite/gas/wasm32/illegal-10.l: New file.
* testsuite/gas/wasm32/illegal-10.s: New file.
* testsuite/gas/wasm32/illegal-11.l: New file.
* testsuite/gas/wasm32/illegal-11.s: New file.
* testsuite/gas/wasm32/illegal-12.l: New file.
* testsuite/gas/wasm32/illegal-12.s: New file.
* testsuite/gas/wasm32/illegal-13.l: New file.
* testsuite/gas/wasm32/illegal-13.s: New file.
* testsuite/gas/wasm32/illegal-14.l: New file.
* testsuite/gas/wasm32/illegal-14.s: New file.
* testsuite/gas/wasm32/illegal-15.l: New file.
* testsuite/gas/wasm32/illegal-15.s: New file.
* testsuite/gas/wasm32/illegal-16.l: New file.
* testsuite/gas/wasm32/illegal-16.s: New file.
* testsuite/gas/wasm32/illegal-17.l: New file.
* testsuite/gas/wasm32/illegal-17.s: New file.
* testsuite/gas/wasm32/illegal-18.l: New file.
* testsuite/gas/wasm32/illegal-18.s: New file.
* testsuite/gas/wasm32/illegal-19.l: New file.
* testsuite/gas/wasm32/illegal-19.s: New file.
* testsuite/gas/wasm32/illegal-20.l: New file.
* testsuite/gas/wasm32/illegal-20.s: New file.
* testsuite/gas/wasm32/illegal-21.l: New file.
* testsuite/gas/wasm32/illegal-21.s: New file.
* testsuite/gas/wasm32/illegal-22.l: New file.
* testsuite/gas/wasm32/illegal-22.s: New file.
* testsuite/gas/wasm32/illegal-24.l: New file.
* testsuite/gas/wasm32/illegal-24.s: New file.
* testsuite/gas/wasm32/illegal-25.l: New file.
* testsuite/gas/wasm32/illegal-25.s: New file.
* testsuite/gas/wasm32/reloc.d: New file.
* testsuite/gas/wasm32/reloc.s: New file.
* testsuite/gas/wasm32/wasm32.exp: New tests for WebAssembly
architecture.
opcodes * configure.ac: Add (empty) bfd_wasm32_arch target.
* configure: Regenerate
* po/opcodes.pot: Regenerate.
include * opcode/wasm.h: New file to support wasm32 architecture.
* elf/wasm32.h: Add R_WASM32_32 relocation.
bfd * elf32-wasm32.c: Add relocation code, two relocs.
* reloc.c: Add wasm32 relocations.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
* bfd/po/bfd.pot: Regenerate.
|
|
* readelf.c (print_gnu_build_attribute_description): Move symbol
printing code to...
(print_symbol_for_build_attribute): New function. ...here.
Add to find the best symbol to associate with an OPEN note.
Add code to cache the symbol table and string table, so that they
are not loaded every time a note is displayed.
* testsuite/binutils-all/note-2-32.s: Add a function symbol.
* testsuite/binutils-all/note-2-64.s: Likewise.
* testsuite/binutils-all/note-2-32.d: Update expected note output.
* testsuite/binutils-all/note-2-64.d: Likewise.
|
|
Property type and datasz are always 4 bytes for both 32-bit and 64-bit
objects. Property values for GNU_PROPERTY_X86_ISA_1_USED and
GNU_PROPERTY_X86_ISA_1_NEEDED are 4 bytes for both i386 and x86-64
objects. We should also check GNU_PROPERTY_LOPROC and
GNU_PROPERTY_LOUSER.
binutils/
PR binutils/21231
* readelf.c (decode_x86_isa): Change argument to unsigned int.
(print_gnu_property_note): Retrieve property type and datasz as
4-byte integer. Consolidate property datasz check. Check
GNU_PROPERTY_LOPROC and GNU_PROPERTY_LOUSER.
* testsuite/binutils-all/i386/pr21231a.d: New file.
* testsuite/binutils-all/i386/pr21231a.s: Likewise.
* testsuite/binutils-all/i386/pr21231b.d: Likewise.
* testsuite/binutils-all/i386/pr21231b.s: Likewise.
* testsuite/binutils-all/x86-64/pr21231a.d: Likewise.
* testsuite/binutils-all/x86-64/pr21231a.s: Likewise.
* testsuite/binutils-all/x86-64/pr21231b.d: Likewise.
* testsuite/binutils-all/x86-64/pr21231b.s: Likewise.
include/
PR binutils/21231
* elf/common.h (GNU_PROPERTY_LOPROC): New.
(GNU_PROPERTY_HIPROC): Likewise.
(GNU_PROPERTY_LOUSER): Likewise.
(GNU_PROPERTY_HIUSER): Likewise.
|
|
include * elf/common.h (SHF_GNU_BUILD_NOTE): Define.
(NT_GNU_PROPERTY_TYPE_0): Define.
(NT_GNU_BUILD_ATTRIBUTE_OPEN): Define.
(NT_GNU_BUILD_ATTRIBUTE_FUN): Define.
(GNU_BUILD_ATTRIBUTE_TYPE_NUMERIC): Define.
(GNU_BUILD_ATTRIBUTE_TYPE_STRING): Define.
(GNU_BUILD_ATTRIBUTE_TYPE_BOOL_TRUE): Define.
(GNU_BUILD_ATTRIBUTE_TYPE_BOOL_FALSE): Define.
(GNU_BUILD_ATTRIBUTE_VERSION): Define.
(GNU_BUILD_ATTRIBUTE_STACK_PROT): Define.
(GNU_BUILD_ATTRIBUTE_RELRO): Define.
(GNU_BUILD_ATTRIBUTE_STACK_SIZE): Define.
(GNU_BUILD_ATTRIBUTE_TOOL): Define.
(GNU_BUILD_ATTRIBUTE_ABI): Define.
(GNU_BUILD_ATTRIBUTE_PIC): Define.
(NOTE_GNU_PROPERTY_SECTION_NAME): Define.
(GNU_BUILD_ATTRS_SECTION_NAME): Define.
(GNU_PROPERTY_STACK_SIZE): Define.
(GNU_PROPERTY_NO_COPY_ON_PROTECTED): Define.
(GNU_PROPERTY_X86_ISA_1_USED): Define.
(GNU_PROPERTY_X86_ISA_1_NEEDED): Define.
(GNU_PROPERTY_X86_ISA_1_486): Define.
(GNU_PROPERTY_X86_ISA_1_586): Define.
(GNU_PROPERTY_X86_ISA_1_686): Define.
(GNU_PROPERTY_X86_ISA_1_SSE): Define.
(GNU_PROPERTY_X86_ISA_1_SSE2): Define.
(GNU_PROPERTY_X86_ISA_1_SSE3): Define.
(GNU_PROPERTY_X86_ISA_1_SSSE3): Define.
(GNU_PROPERTY_X86_ISA_1_SSE4_1): Define.
(GNU_PROPERTY_X86_ISA_1_SSE4_2): Define.
(GNU_PROPERTY_X86_ISA_1_AVX): Define.
(GNU_PROPERTY_X86_ISA_1_AVX2): Define.
(GNU_PROPERTY_X86_ISA_1_AVX512F): Define.
(GNU_PROPERTY_X86_ISA_1_AVX512CD): Define.
(GNU_PROPERTY_X86_ISA_1_AVX512ER): Define.
(GNU_PROPERTY_X86_ISA_1_AVX512PF): Define.
(GNU_PROPERTY_X86_ISA_1_AVX512VL): Define.
(GNU_PROPERTY_X86_ISA_1_AVX512DQ): Define.
(GNU_PROPERTY_X86_ISA_1_AVX512BW): Define.
binutils* readelf.c (get_note_type): Add support for GNU_BUILD_NOTEs.
(get_gnu_elf_note_type): Add support for GNU_PROPERTY_NOTEs.
(decode_x86_isa): New function.
(print_gnu_property_note): New function.
(print_gnu_note): Handle GNU_PROPERTY_NOTEs.
(print_gnu_build_attribute_description): New function.
(print_gnu_build_attribute_name): New function.
(process_note): Add support for GNU_BUILD_NOTEs.
* objcopy.c (--merge-notes): New command line option.
(copy_options): Add merge-notes.
(copy_usage): Likewise.
(is_merge_note_section): New function.
(merge_gnu_build_notes): New function.
(copy_object): Merge note sections if asked to do so.
(skip_section): Add skip_copy parameter. Add support for skipping
merged note sections.
(copy_relocations_in_section): Update call to skip_section.
(copy_section): Likewise.
(copy_main): Add support for merge-notes option.
* doc/binutils.texi: Document the new option to objcopy.
* NEWS: Mention the new feature.
* testsuite/binutils-all/note-2-32.d: New test. Checks note
merging on 32-bit targets.
* testsuite/binutils-all/note-2-32.s: New test source file.
* testsuite/binutils-all/note-2-64.d: New test. Like note-2-32.d
but for 64-bit targets.
* testsuite/binutils-all/note-2-64.s: New test source file.
* testsuite/binutils-all/objcopy.exp: Run the new test.
|
|
On some targets, .string does not add a NUL string terminator.
* testsuite/binutils-all/dw5.S: Replace .string with .asciz.
Support hpux .comm variant.
* testsuite/binutils-all/readelf.exp: Define HPUX when assembling
dw5 test for hppa64-hpux.
|
|
binutils/
2017-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* testsuite/binutils-all/dw5.S: New file.
* testsuite/binutils-all/dw5.W: New file.
* testsuite/binutils-all/readelf.exp (readelf -wiaoRlL): New test.
|
|
parsing/writing windows resource files.
binutils* resbin.c: Optional dialog control data immediately follow
the control description without alignment.
* testsuite/binutils-all/windres/controldata.rc: New test.
source.
* testsuite/binutils-all/windres/controldata.rsd: New test.
|
|
PR binutils/20876
bfd * opncls.c (find_separate_debug_file): Add include_dirs
parameter. Only include the directory part of the bfd's filename
in search paths if include_dirs is true. Add a couple of extra
locations for looking for debug files.
( bfd_follow_gnu_debuglink): Update invocation of
find_separate_debug_file.
(bfd_follow_gnu_debugaltlink): Likewise.
(get_build_id): New function: Finds the build-id of the given bfd.
(get_build_id_name): New function: Computes the name of the
separate debug info file for a bfd, based upon its build-id.
(check_build_id_file): New function: Checks to see if a separate
debug info file exists at the given location, and that its
build-id matches that of the original bfd.
(bfd_follow_build_id_debuglink): New function: Finds a separate
debug info file for a given bfd by using the build-id method.
* dwarf2.c (_bfd_dwarf2_slurp_debug_info): Try using the build-id
method of locating a separate debug info file before using the
debuglink method.
* bfd-in2.h: Regenerate.
binutils * NEWS: Mention the new feature.
* testsuite/binutils-all/objdump.exp (test_build_id_debuglink):
New proc to test the location of separate debug info files using
the build-id method.
|
|
|
|
Add ASMACRO instruction support as per the MIPS16e ASE architecture
specifications [1][2], completing MIPS16e instruction set support.
[1] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00076, Revision 2.63, July
16, 2013, Section 4.1 "MIPS16e Instruction Descriptions", p. 65
[2] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00077, Revision 2.60, June
25, 2008, Section 1.1 "MIPS16e Instruction Descriptions", p. 66
include/
* opcode/mips.h: Document `0', `1', `2', `3', `4' and `s'
operand codes.
opcodes/
* mips16-opc.c (decode_mips16_operand): Add `0', `1', `2', `3',
`4' and `s' operand codes.
(mips16_opcodes): Add "asmacro" entry.
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: Update for
ASMACRO support.
gas/
* testsuite/gas/mips/mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-32@mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-64@mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-asmacro.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
|
|
Identify non-extensible instructions in the MIPS16 opcode table and
disallow their use with the `.e' instruction size suffix in assembly and
do not interpret any EXTEND prefix present as a part of the instruction
in disassembly.
According to all versions of the MIPS16 ASE specifications the following
instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R,
I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA
and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e
ASE specifications it has been further clarified what was previously
implied, that non-extesiable instructions when preceded with an EXTEND
prefix must cause a Reserved Instruction exception [3][5].
Therefore in the presence of an EXTEND prefix none of these instructions
are supposed to be handled as extended instructions and supporting these
forms in disassembly causes confusion, and in the case of the RRR major
opcode it also clashes with the ASMACRO encoding.
References:
[1] "Product Description, MIPS16 Application-Specific Extension",
Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16
Instruction Set Summary", p. 5
[2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10
[3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00076, Revision 2.63, July
16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39
[4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49
[5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00077, Revision 2.60, June
25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41
[6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51
include/
* opcode/mips.h (INSN2_SHORT_ONLY): New macro.
gas/
* config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix
instruction size override for INSN2_SHORT_ONLY opcode table
entries.
* testsuite/gas/mips/mips16-extend-swap.d: Adjust output.
* testsuite/gas/mips/mips16-macro-e.l: Adjust error messages.
* testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error
messages.
* testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error
messages.
* testsuite/gas/mips/mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-insn-e.l: New stderr output.
* testsuite/gas/mips/mips16-insn-t.l: New stderr output.
* testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16-insn-e.s: New test source.
* testsuite/gas/mips/mips16-insn-t.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
opcodes/
* mips-dis.c (print_insn_mips16): Disallow EXTEND prefix
matching for INSN2_SHORT_ONLY opcode table entries.
* mips16-opc.c (SH): New macro.
(mips16_opcodes): Set SH in `pinfo2' for non-extensible
instruction entries: "nop", "addu", "and", "break", "cmp",
"daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu",
"drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv",
"dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j",
"jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg",
"not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu",
"srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb",
"seh", "sew", "zeb", "zeh", "zew" and "extend".
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: New test.
* testsuite/binutils-all/mips/mips16-extend-insn.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
|
|
Limit MIPS16 instruction disassembly according to the ISA level and ASE
set selected, as with the regular MIPS and microMIPS instruction sets.
Retain the property of `objdump -m mips:16' disassembling all MIPS16
instructions however, regardless of any ISA level recorded in the binary
examined.
To validate the disassembler use the GAS test suite for its convenience
of running tests across multiple ISAs, even though placing the tests in
the binutils test suite would be more appropriate. Adjust the single
binutils test which depends on 64-bit instruction disassembly to have
the ISA level required actually recorded in the binary examined.
opcodes/
* mips-dis.c (mips_arch_choices): Use ISA_MIPS64 rather than
ISA_MIPS3 as the `isa' selection in the `bfd_mach_mips16' entry.
(print_insn_mips16): Check opcode entries for validity against
the ISA level and ASE set selected.
binutils/
* testsuite/binutils-all/mips/mips16-undecoded.s: Use `.module'
rather than `.set' to set the ISA level.
gas/
* testsuite/gas/mips/mips16-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16e-sub.d: New test.
* testsuite/gas/mips/mips16-64@mips16e-sub.d: New test.
* testsuite/gas/mips/mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-64@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16e-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-sub.s: New test source.
* testsuite/gas/mips/mips16e-sub.s: New test source.
* testsuite/gas/mips/mips16e-64-sub.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
|
|
Switch to 32-bit MIPS16 opcode table entry interpretation, similar to
how the microMIPS opcode table is handled, for both the `match' and
`mask' fields, removing special casing for JAL and JALX instructions and
their `a' and `i' operand codes throughout, while retaining automatic
processing of extendable opcodes in assembly and disassembly.
In assembly disallow size enforcement suffixes as appropriate: `.t' for
both 32-bit instructions and macros and `.e' for macros only, making
macro handling consistent with the microMIPS instruction set.
In disassembly fully decode EXTEND prefixes prepended to unsupported
instruction encodings (according to the ISA selection) rather than
dumping them as hexadecimal data along with the following instruction,
removing all special casing for the EXTEND prefix and making its
handling rely on its opcode table entry, except where it is considered a
part of an extendable instruction.
include/
* opcode/mips.h (mips_opcode_32bit_p): New inline function.
gas/
* config/tc-mips.c (micromips_insn_length): Use
`mips_opcode_32bit_p'.
(is_size_valid): Adjust description.
(is_size_valid_16): New function.
(validate_mips_insn): Use `mips_opcode_32bit_p' in MIPS16
operand decoding.
(validate_mips16_insn): Remove `a' and `i' operand code special
casing, use `mips_opcode_32bit_p' to determine instruction
width.
(append_insn): Adjust forced MIPS16 instruction size
determination.
(match_mips16_insn): Likewise. Don't shift the instruction's
opcode with the `a' and `i' operand codes. Use
`mips_opcode_32bit_p' in operand decoding.
(match_mips16_insns): Check for forced instruction size's
validity.
(mips16_ip): Don't force instruction size in the `noautoextend'
mode.
* testsuite/gas/mips/mips16-jal-e.d: New test.
* testsuite/gas/mips/mips16-jal-t.d: New test.
* testsuite/gas/mips/mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16-jal-t.l: New stderr output.
* testsuite/gas/mips/mips16-macro-e.l: New stderr output.
* testsuite/gas/mips/mips16-macro-t.l: New stderr output.
* testsuite/gas/mips/mips16-jal-e.s: New test source.
* testsuite/gas/mips/mips16-jal-t.s: New test source.
* testsuite/gas/mips/mips16-macro-e.s: New test source.
* testsuite/gas/mips/mips16-macro-t.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Always handle `extend' and
`insn' together, with `extend' as the high-order 16 bits.
(match_kind): New enum.
(print_insn_mips16): Rework for 32-bit instruction matching.
Do not dump EXTEND prefixes here.
* mips16-opc.c (mips16_opcodes): Move "extend" entry to the end.
Recode `match' and `mask' fields as 32-bit in absolute "jal" and
"jalx" entries.
binutils/
* testsuite/binutils-all/mips/mips16-extend-noinsn.d: Adjust
test for separate EXTEND prefix disassembly.
|
|
Respect any ASE flags recorded in ELF file structures for the purpose of
selecting instructions to be disassembled, preventing code from being
hex-dumped even though having been clearly indicated as valid at the
assembly time. Use date from the MIPS ABI flags structure if present,
and otherwise there may be an MDMX ASE flag set in the ELF file header.
For backwards compatibility only set extra flags and do not clear any,
preserving all previously set by the architecture selected to be
disassembled for.
include/
* elf/mips.h (Elf_Internal_ABIFlags_v0): Also declare struct
typedef as `elf_internal_abiflags_v0'.
bfd/
* bfd-in.h (elf_internal_abiflags_v0): New struct declaration.
(bfd_mips_elf_get_abiflags): New prototype.
* elfxx-mips.c (bfd_mips_elf_get_abiflags): New function.
* bfd-in2.h: Regenerate.
opcodes/
* mips-dis.c (mips_convert_abiflags_ases): New function.
(set_default_mips_dis_options): Also infer ASE flags from ELF
file structures.
binutils/
* testsuite/binutils-all/mips/mips-ase-1.d: New test.
* testsuite/binutils-all/mips/mips-ase-2.d: New test.
* testsuite/binutils-all/mips/mips-ase-3.d: New test.
* testsuite/binutils-all/mips/mips-ase-1.s: New test source.
* testsuite/binutils-all/mips/mips-ase-2.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
|
|
Use a tab rather than a space to separate `extend' and its uninterpreted
argument output, like with regular instructions. Separate hexadecimal
halves of undecoded extended instructions output with a space instead of
presenting them concatenated.
opcodes/
* mips-dis.c (print_insn_mips16): Use a tab rather than a space
to separate `extend' and its uninterpreted argument output.
Separate hexadecimal halves of undecoded extended instructions
output.
binutils/
* testsuite/binutils-all/mips/mips16-extend-noinsn.d: New test.
* testsuite/binutils-all/mips/mips16-extend-noinsn.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new test.
|
|
Complement commit dd8b7c222e0e ("MIPS: mips16e jalrc/jrc opcodes"),
<https://sourceware.org/ml/binutils/2005-07/msg00349.html>, and stop the
disassembler making a delay-slot adjustment for PC-relative operations
following either MIPS16e compact jumps, or undefined RR/J(AL)R(C)
encodings that have the `l' (link) and `ra' (source register is `ra')
bits set both at a time. Adjust code description for accuracy. Add a
suitable test case.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Avoid delay-slot
adjustment for PC-relative operations following MIPS16e compact
jumps or undefined RR/J(AL)R(C) encodings.
binutils/
* testsuite/binutils-all/mips/mips16-pcrel.d: New test.
* testsuite/binutils-all/mips/mips16-pcrel.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new test.
|
|
This patch fixes:
- fpus and fpud are swaped.
- quarkse_em doesn't include FPX extensions.
- auto guessed opcode mechanism may ignore the option passed via -M<feature> option.
opcodes/
2016-11-29 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (is_compatible_p): Remove function.
(skip_this_opcode): Don't add any decoding class to decode list.
Remove warning.
(find_format_from_table): Go through all opcodes, and warn if we
use a guessed mnemonic.
binutils/
2016-11-29 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/binutils-all/arc/objdump.exp (Warning test): Update
test.
|
|
PR binutils/20751
* nm.c (with_symbol_versions): New local variable.
(long_options): Add --with-symbol-versions.
(usage): Mention --with-symbol-versions.
(print_symbol): If with_symbol_versions is set then display the
version information associated with the symbol.
* NEWS: Mention the new feature.
* doc/binutils.texi (nm): Document the new option.
(objdump): Describe how symbol version information is displayed
for dynamic symbol dumps.
(readelf): Describe how symbol version information is displayed.
* testsuite/binutils-all/nm.exp: Add a test of the new feature.
|
|
bfd * Makefile.am: Add entries for riscv32-elf and riscv64-elf.
* config.bdf: Likewise.
* configure.ac: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* archures.c: Add bfd_riscv_arch.
* reloc.c: Add riscv relocs.
* targets.c: Add riscv_elf32_vec and riscv_elf64_vec.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf-bfd.h: Add RISCV_ELF_DATA to enum elf_target_id.
* elfnn-riscv.c: New file.
* elfxx-riscv.c: New file.
* elfxx-riscv.h: New file.
binutils* readelf.c (guess_is_rela): Add EM_RISCV.
(get_machine_name): Likewise.
(dump_relocations): Add support for riscv relocations.
(get_machine_flags): Add support for riscv flags.
(is_32bit_abs_reloc): Add R_RISCV_32.
(is_64bit_abs_reloc): Add R_RISCV_64.
(is_none_reloc): Add R_RISCV_NONE.
* testsuite/binutils-all/objdump.exp (cpus_expected): Add riscv.
Expect the debug_ranges test to fail.
gas * Makefile.am: Add riscv files.
* Makefile.in: Regenerate.
* NEWS: Mention the support for this architecture.
* configure.in: Define a default architecture.
* configure: Regenerate.
* configure.tgt: Add entries for riscv.
* doc/as.texinfo: Likewise.
* testsuite/gas/all/gas.exp: Expect the redef tests to fail.
* testsuite/gas/elf/elf.exp: Expect the groupauto tests to fail.
* config/tc-riscv.c: New file.
* config/tc-riscv.h: New file.
* doc/c-riscv.texi: New file.
* testsuite/gas/riscv: New directory.
* testsuite/gas/riscv/riscv.exp: New file.
* testsuite/gas/riscv/t_insns.d: New file.
* testsuite/gas/riscv/t_insns.s: New file.
ld * Makefile.am: Add riscv files.
* Makefile.in: Regenerate.
* NEWS: Mention the support for this target.
* configure.tgt: Add riscv entries.
* emulparams/elf32lriscv-defs.sh: New file.
* emulparams/elf32lriscv.sh: New file.
* emulparams/elf64lriscv-defs.sh: New file.
* emulparams/elf64lriscv.sh: New file.
* emultempl/riscvelf.em: New file.
opcodes * configure.ac: Add entry for bfd_riscv_arch.
* configure: Regenerate.
* disassemble.c (disassembler): Add support for riscv.
(disassembler_usage): Likewise.
* riscv-dis.c: New file.
* riscv-opc.c: New file.
include * dis-asm.h: Add prototypes for print_insn_riscv and
print_riscv_disassembler_options.
* elf/riscv.h: New file.
* opcode/riscv-opc.h: New file.
* opcode/riscv.h: New file.
|
|
* readelf.c (apply_relocations): Fail if the symbol table section
linked to by the reloc section does not have either the SHT_SYMTAB
or SHT_DYNSYM type.
(print_gnu_note): Decode the contents of NT_GNU_HWCAP notes.
Print the contents of unknown note types.
(process_note): Add the file and section to the parameter list.
Use print_symbol to display the note name.
Display the contents of unknown note types.
(process_corefile_note_segment): Rename to process_notes_at.
Add section parameter. Apply relocations to the notes when
loading from a section. Display section name when processing
notes in a section.
* testsuite/binutils-all/readelf.n: Update expected output.
|
|
As pointed out in PR binutils/19020, those tests were still failing when doing
remote testing. This is because the binary files weren't being copied over to
the remote host for testing.
FAIL: binutils-all/pr19020a
FAIL: binutils-all/pr19020b
This small patch fixes this up to make things pass.
binutils/ChangeLog:
2016-10-14 Luis Machado <lgustavo@codesourcery.com>
* testsuite/lib/utils-lib.exp (run_dump_test): Call remote_download
to copy file to remote host.
|
|
monotonically increasing section offsets.
bfd
* elf.c (assign_section_numbers): Assign number for the .shstrtab
section after the symbol table and string table sections.
binutils
* testsuite/binutils-all/readelf.s: Adjust expected ordering of
sections.
* testsuite/binutils-all/readelf.s-64: Likewise.
gas
* testsuite/gas/i386/ilp32/x86-64-unwind.d: Adjust expected ordering
of sections.
* testsuite/gas/i386/x86-64-unwind.d: Likewise.
* testsuite/gas/ia64/alias-ilp32.d: Likewise.
* testsuite/gas/ia64/alias.d: Likewise.
* testsuite/gas/ia64/group-1.d: Likewise.
* testsuite/gas/ia64/group-2.d: Likewise.
* testsuite/gas/ia64/secname-ilp32.d: Likewise.
* testsuite/gas/ia64/secname.d: Likewise.
* testsuite/gas/ia64/unwind-ilp32.d: Likewise.
* testsuite/gas/ia64/unwind.d: Likewise.
* testsuite/gas/ia64/xdata-ilp32.d: Likewise.
* testsuite/gas/ia64/xdata.d: Likewise.
* testsuite/gas/mmix/bspec-1.d: Likewise.
* testsuite/gas/mmix/bspec-2.d: Likewise.
* testsuite/gas/mmix/byte-1.d: Likewise.
* testsuite/gas/mmix/loc-1.d: Likewise.
* testsuite/gas/mmix/loc-2.d: Likewise.
* testsuite/gas/mmix/loc-3.d: Likewise.
* testsuite/gas/mmix/loc-4.d: Likewise.
* testsuite/gas/mmix/loc-5.d: Likewise.
* testsuite/gas/tic6x/scomm-directive-4.d: Likewise.
ld
* testsuite/ld-alpha/tlsbin.rd: Adjust expected ordering of sections.
* testsuite/ld-alpha/tlsbinr.rd: Likewise.
* testsuite/ld-alpha/tlspic.rd: Likewise.
* testsuite/ld-cris/libdso-2.d: Likewise.
* testsuite/ld-i386/nogot1.d: Likewise.
* testsuite/ld-i386/pr12718.d: Likewise.
* testsuite/ld-i386/pr12921.d: Likewise.
* testsuite/ld-i386/tlsbin-nacl.rd: Likewise.
* testsuite/ld-i386/tlsbin.rd: Likewise.
* testsuite/ld-i386/tlsbin2-nacl.rd: Likewise.
* testsuite/ld-i386/tlsbin2.rd: Likewise.
* testsuite/ld-i386/tlsbindesc-nacl.rd: Likewise.
* testsuite/ld-i386/tlsbindesc.rd: Likewise.
* testsuite/ld-i386/tlsdesc-nacl.rd: Likewise.
* testsuite/ld-i386/tlsdesc.rd: Likewise.
* testsuite/ld-i386/tlsgdesc-nacl.rd: Likewise.
* testsuite/ld-i386/tlsgdesc.rd: Likewise.
* testsuite/ld-i386/tlsnopic-nacl.rd: Likewise.
* testsuite/ld-i386/tlsnopic.rd: Likewise.
* testsuite/ld-i386/tlspic-nacl.rd: Likewise.
* testsuite/ld-i386/tlspic.rd: Likewise.
* testsuite/ld-i386/tlspic2-nacl.rd: Likewise.
* testsuite/ld-i386/tlspic2.rd: Likewise.
* testsuite/ld-ia64/tlsbin.rd: Likewise.
* testsuite/ld-ia64/tlspic.rd: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-10.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-50.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-60.d: Likewise.
* testsuite/ld-mips-elf/attr-gnu-4-70.d: Likewise.
* testsuite/ld-mmix/bspec1.d: Likewise.
* testsuite/ld-mmix/bspec2.d: Likewise.
* testsuite/ld-mmix/local1.d: Likewise.
* testsuite/ld-mmix/local3.d: Likewise.
* testsuite/ld-mmix/local5.d: Likewise.
* testsuite/ld-mmix/local7.d: Likewise.
* testsuite/ld-mmix/undef-3.d: Likewise.
* testsuite/ld-powerpc/tlsexe.r: Likewise.
* testsuite/ld-powerpc/tlsexe32.r: Likewise.
* testsuite/ld-powerpc/tlsexetoc.r: Likewise.
* testsuite/ld-powerpc/tlsso.r: Likewise.
* testsuite/ld-powerpc/tlsso32.r: Likewise.
* testsuite/ld-powerpc/tlstocso.r: Likewise.
* testsuite/ld-s390/tlsbin.rd: Likewise.
* testsuite/ld-s390/tlsbin_64.rd: Likewise.
* testsuite/ld-s390/tlspic.rd: Likewise.
* testsuite/ld-s390/tlspic_64.rd: Likewise.
* testsuite/ld-sh/sh64/crange1.rd: Likewise.
* testsuite/ld-sh/sh64/crange2.rd: Likewise.
* testsuite/ld-sh/sh64/crange3-cmpct.rd: Likewise.
* testsuite/ld-sh/sh64/crange3-media.rd: Likewise.
* testsuite/ld-sh/sh64/crange3.rd: Likewise.
* testsuite/ld-sh/sh64/crangerel1.rd: Likewise.
* testsuite/ld-sh/sh64/crangerel2.rd: Likewise.
* testsuite/ld-sh/tlsbin-2.d: Likewise.
* testsuite/ld-sh/tlspic-2.d: Likewise.
* testsuite/ld-sparc/gotop32.rd: Likewise.
* testsuite/ld-sparc/gotop64.rd: Likewise.
* testsuite/ld-sparc/tlssunbin32.rd: Likewise.
* testsuite/ld-sparc/tlssunbin64.rd: Likewise.
* testsuite/ld-sparc/tlssunnopic32.rd: Likewise.
* testsuite/ld-sparc/tlssunnopic64.rd: Likewise.
* testsuite/ld-sparc/tlssunpic32.rd: Likewise.
* testsuite/ld-sparc/tlssunpic64.rd: Likewise.
* testsuite/ld-tic6x/common.d: Likewise.
* testsuite/ld-tic6x/shlib-1.rd: Likewise.
* testsuite/ld-tic6x/shlib-1b.rd: Likewise.
* testsuite/ld-tic6x/shlib-1r.rd: Likewise.
* testsuite/ld-tic6x/shlib-1rb.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1b.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1r.rd: Likewise.
* testsuite/ld-tic6x/shlib-app-1rb.rd: Likewise.
* testsuite/ld-tic6x/shlib-noindex.rd: Likewise.
* testsuite/ld-tic6x/static-app-1.rd: Likewise.
* testsuite/ld-tic6x/static-app-1b.rd: Likewise.
* testsuite/ld-tic6x/static-app-1r.rd: Likewise.
* testsuite/ld-tic6x/static-app-1rb.rd: Likewise.
* testsuite/ld-x86-64/ilp32-4-nacl.d: Likewise.
* testsuite/ld-x86-64/ilp32-4.d: Likewise.
* testsuite/ld-x86-64/nogot1.d: Likewise.
* testsuite/ld-x86-64/pr12718.d: Likewise.
* testsuite/ld-x86-64/pr12921.d: Likewise.
* testsuite/ld-x86-64/split-by-file-nacl.rd: Likewise.
* testsuite/ld-x86-64/split-by-file.rd: Likewise.
* testsuite/ld-x86-64/tlsbin-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsbin.rd: Likewise.
* testsuite/ld-x86-64/tlsbin2-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsbin2.rd: Likewise.
* testsuite/ld-x86-64/tlsbindesc-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsbindesc.rd: Likewise.
* testsuite/ld-x86-64/tlsdesc-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsdesc.rd: Likewise.
* testsuite/ld-x86-64/tlsgdesc-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlsgdesc.rd: Likewise.
* testsuite/ld-x86-64/tlspic-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlspic.rd: Likewise.
* testsuite/ld-x86-64/tlspic2-nacl.rd: Likewise.
* testsuite/ld-x86-64/tlspic2.rd: Likewise.
* testsuite/ld-xtensa/tlsbin.rd: Likewise.
* testsuite/ld-xtensa/tlspic.rd: Likewise.
|
|
gas * testsuite/gas/arc/dsp.d: New file.
* testsuite/gas/arc/dsp.s: Likewise.
* testsuite/gas/arc/fpu.d: Likewise.
* testsuite/gas/arc/fpu.s: Likewise.
* testsuite/gas/arc/ext2op.d: Add specific disassembler option.
* testsuite/gas/arc/ext3op.d: Likewise.
* testsuite/gas/arc/tdpfp.d: Likewise.
* testsuite/gas/arc/tfpuda.d: Likewise.
opcodes * arc-dis.c (skipclass): New structure.
(decodelist): New variable.
(is_compatible_p): New function.
(new_element): Likewise.
(skip_class_p): Likewise.
(find_format_from_table): Use skip_class_p function.
(find_format): Decode first the extension instructions.
(print_insn_arc): Select either ARCEM or ARCHS based on elf
e_flags.
(parse_option): New function.
(parse_disassembler_options): Likewise.
(print_arc_disassembler_options): Likewise.
(print_insn_arc): Use parse_disassembler_options function. Proper
select ARCv2 cpu variant.
* disassemble.c (disassembler_usage): Add ARC disassembler
options.
binutils* doc/binutils.texi (objdump): Add ARC disassembler options.
* testsuite/binutils-all/arc/dsp.s: New file.
* testsuite/binutils-all/arc/objdump.exp: Likewise.
include * dis-asm.h: Declare print_arc_disassembler_options.
|
|
Fixes failures on alpha, ia64, mcore, metag, moxie, and pj due to lack
of 16-bit relocs.
* testsuite/binutils-all/remove-relocs-01.s: Use .dc.a, not .word.
|
|
The objcopy and strip tools make use of the bfd library to manipulate
the state of the input file (to produce an output file). Within the
input file (for ELF at least), relocations are held within a section,
and so, if the user wanted to remove the relocations, but keep the
section to which the relocations would have been applied, it is tempting
to think that specifying the name of a relocation section to objcopy's
--remove-section option might do what you want, for example:
objcopy --remove-section=.rela.text input.elf output.elf
However, this does not work. The reason is that when the input file is
loaded, relocations are not managed as sections, but are, instead,
loaded as data associated with the section to which the relocations
would be applied. In our example above the relocations in '.rela.text'
are held as data on the section '.text' once 'input.elf' is loaded.
One task that objcopy and strip do is copy the relocations from the
input file to the output file if the section is also being copied from
the input file to the output file.
This commit adds a new command line option for objcopy and strip,
--remove-relocations, which can be used to remove the relocations, while
keeping the section that the relocations would have been applied to, for
example:
objcopy --remove-relocations=.text input.elf output.elf
in this case the section '.text' will appear in both 'input.elf' and
'output.elf', but any relocations in 'input.elf' that apply to '.text'
will not be present in 'output.elf'.
I have also added a special case to the handling of --remove-section
that spots if a user tries to remove a relocation section (currently
this is done by spotting the '.rela.' or '.rel.' prefix) and forwards
the request to --remove-relocations.
As with --remove-section and --only-section the --remove-relocations
option supports the '!' prefix on the section-patterns it takes to allow
for sections to be specifically not matched.
There are tests for all the new functionality.
binutils/ChangeLog:
* doc/binutils.texi (objcopy): Document 'remove-relocations'.
(strip): Likewise.
* objcopy.c (SECTION_CONTEXT_REMOVE_RELOCS): Define.
(enum command_line_switch): Add 'OPTION_REMOVE_RELOCS'.
(struct option strip_options): Add 'remove-relocations'.
(struct option copy_options): Likewise.
(copy_usage): Likewise.
(strip_usage): Likewise.
(handle_remove_relocations_option): New function.
(discard_relocations): New function.
(handle_remove_section_option): New function.
(copy_relocations_in_section): Use discard_relocations.
(strip_main): Use handle_remove_section_option for
'remove-section', and handle 'remove-relocations' option.
(copy_main): Likewise.
* testsuite/binutils-all/objcopy.exp: Run new tests.
* testsuite/binutils-all/remove-relocs-01.d: New file.
* testsuite/binutils-all/remove-relocs-01.s: New file.
* testsuite/binutils-all/remove-relocs-02.d: New file.
* testsuite/binutils-all/remove-relocs-03.d: New file.
* testsuite/binutils-all/remove-relocs-04.d: New file.
* testsuite/binutils-all/remove-relocs-05.d: New file.
* testsuite/binutils-all/remove-relocs-06.d: New file.
|
|
For symbol matching, prefixing a pattern with '!' will indicate a
non-matching pattern, however, this is not the case for section
patterns. As a result it is not possible to say "apply this action to
all sections except ...".
With this commit the objcopy and strip tools now support '!' prefix for
section patterns, so we can say:
objcopy --remove-section="*" --remove-section="!.text*"
Which will remove all sections, except those matching the pattern
'.text*'.
binutils/ChangeLog:
* objcopy.c (find_section_list): Handle section patterns starting
with '!' being a non-matching pattern.
* doc/binutils.texi (objcopy): Give example of using '!' with
--remove-section and --only-section.
(strip): Give example of using '!' with --remove-section.
* testsuite/binutils-all/data-sections.s: New file.
* testsuite/binutils-all/only-section-01.d: New file.
* testsuite/binutils-all/remove-section-01.d: New file.
* testsuite/binutils-all/objcopy.exp: Run new tests.
* NEWS: Mention new feature.
|
|
targets.
* testsuite/binutils-all/objcopy.exp
(objcopy_test_without_global_symbol): Expect this test to fail on
the AArch64 and ARM targets, since they preserve their mapping
symbols.
|
|
allowing the tests to be run for ELF variants.
* testsuite/binutils-all/ar.exp: Relax previous restriction on
Alpha targets. Allow ELF based Alpha targets.
|
|
Complement commit a43942db49b0 ("LD/ELF: Unify STB_GNU_UNIQUE handling")
and use `supports_gnu_unique' with the `unique_symbol' and `type' tests,
fixing failures like:
.../binutils/testsuite/binutils-all/unique.s: Assembler messages:
.../binutils/testsuite/binutils-all/unique.s:2: Error: symbol type "gnu_unique_object" is supported only by GNU targets
ERROR: .../binutils/testsuite/binutils-all/unique.s: assembly failed
UNRESOLVED: ar unique symbol in archive
.../binutils/ar -s -r -c tmpdir/artest.a tmpdir/unique.o
Executing on host: .../binutils/ar -s -r -c tmpdir/artest.a tmpdir/unique.o (timeout = 300)
.../binutils/ar: tmpdir/unique.o: No such file or directory
FAIL: ar unique symbol in archive
and:
.../gas/testsuite/gas/elf/type.s: Assembler messages:
.../gas/testsuite/gas/elf/type.s:30: Error: symbol type "gnu_unique_object" is supported only by GNU targets
../as-new: BFD (GNU Binutils) 2.26.51.20160628 internal error, aborting at .../gas/write.c:608 in size_seg
../as-new: Please report this bug.
.../gas/testsuite/../../binutils/readelf -s dump.o | grep "1 *\[FIONTCU\]" > dump.out
Executing on host: sh -c {.../gas/testsuite/../../binutils/readelf -s dump.o >readelf.out 2>gas.stderr} /dev/null (timeout = 300)
readelf: Error: dump.o: Failed to read file's magic number
FAIL: elf type list
on MIPS/FreeBSD targets:
mips-freebsd -FAIL: ar unique symbol in archive
mips-freebsd -FAIL: elf type list
mips64-freebsd -FAIL: ar unique symbol in archive
mips64-freebsd -FAIL: elf type list
mips64el-freebsd -FAIL: ar unique symbol in archive
mips64el-freebsd -FAIL: elf type list
mipsel-freebsd -FAIL: ar unique symbol in archive
mipsel-freebsd -FAIL: elf type list
binutils/
* testsuite/binutils-all/ar.exp: Use `supports_gnu_unique' with
the `unique_symbol' test.
gas/
* testsuite/gas/elf/elf.exp: Use `supports_gnu_unique' with the
`type' test.
|
|
Some MIPS targets use a named section symbol rather than a symbol with
no name as is used with most ELF targets. When renaming sections, the
named section symbol needs to be renamed too.
Rather than fix this bug, I'd originally intended to just correct the
xfail added recently for update-1.o vs update4.o in update-section.exp,
using the same set of targets for the localize-hidden-1 mips xfail.
I'd extracted that target test into a new function, is_bad_symtab. It
turns out to be useful in readelf.exp too.
bfd/
* config.bfd: Delete mips vxworks patterns matched earlier.
Combine mips*-*-none with mips*-*-elf*.
binutils/
* objcopy.c (find_section_rename): Forward declare. Remove
ibfd and sec_ptr param. Add old_name param. Allow for NULL
returned_flags. Move read of section name and flags to..
(setup_section): ..here. Update find_section_rename call.
(filter_symbols): Rename section symbols for renamed sections.
(copy_object): Call filter_symbols when renamed sections.
* testsuite/lib/binutils-common.exp (is_bad_symtab): New.
* testsuite/binutils-all/update-section.exp: Revert 96037eb0
mips xfail.
* testsuite/binutils-all/objcopy.exp (copy_executable): Use
is_bad_symtab.
(localize-hidden-1): xfail if is_bad_symtab.
* testsuite/binutils-all/readelf.exp: Use is_bad_symtab to select
between mips/tmips.
|
|
* testsuite/binutils-all/ar.exp: Skip tests for Alpha target.
Skip bfdtest1 tests for tic30 target.
* testsuite/binutils-all/arm/objdump.exp: Skip for aout arm
target.
* testsuite/binutils-all/compress.exp: Expect some tests to fail
on the nds32.
* testsuite/binutils-all/copy-3.d: Skip for go32 targets.
* testsuite/binutils-all/copy-4.d: Skip for AIX and linuxecoff
targets.
* testsuite/binutils-all/nm.exp: Treat beos based targets as ELF
targets.
* testsuite/binutils-all/objcopy.exp: Only run reverse bytes tests
if the bintest.o file was created. Use the
get_standard_section_names proc to get the name of the data
section.
* testsuite/binutils-all/objdump.exp: Update regexps to allow for
RX section names.
* testsuite/binutils-all/readelf.exp: Use
get_standard_section_names proc to get the name of the data
section.
* testsuite/binutils-all/readelf.r: Allow for non standard text
section names.
* testsuite/binutils-all/readelf.s: Update regexps for tilepro.
* testsuite/binutils-all/size.exp: Allow for non standard section
names.
* testsuite/binutils-all/update-section.exp: Expect comapre 1vs4
to fail on mips targets.
* testsuite/lib/utils-lib.exp (default_binutils_run): Use
get_standard_section_names proc.
(run_dump_test): Likewise.
(proc get_standard_section_names): New proc.
|
|
Mixing MIPS16 and microMIPS code in a single binary isn't usually
supported but GAS happily produces such code if requested. However it
is not correctly disassembled even if a symbol table is available and
function symbols are correctly anotated with the ISA mode. This is
because the ELF-header global microMIPS ASE flag takes precedence over
MIPS16 function annotation, causing them to be treated as regular MIPS
code.
Correct the problem by respecting function symbol anotation regardless
of the ELF-header flag.
binutils/
* testsuite/binutils-all/mips/mixed-mips16-micromips.d: New test.
* testsuite/binutils-all/mips/mixed-mips16-micromips.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new test.
opcodes/
* mips-dis.c (is_compressed_mode_p): Add `micromips_p' operand,
replacing references to `micromips_ase' throughout.
(_print_insn_mips): Don't use file-level microMIPS annotation to
determine the disassembly mode with the symbol table.
|
