Age | Commit message (Collapse) | Author | Files | Lines |
|
This commit adds a long-missing piece of infrastructure to libctf: the
ability to report errors and warnings using all the power of printf,
rather than being restricted to one errno value. Internally, libctf
calls ctf_err_warn() to add errors and warnings to a list: a new
iterator ctf_errwarning_next() then consumes this list one by one and
hands it to the caller, which can free it. New errors and warnings are
added until the list is consumed by the caller or the ctf_file_t is
closed, so you can dump them at intervals. The caller can of course
choose to print only those warnings it wants. (I am not sure whether we
want objdump, readelf or ld to print warnings or not: right now I'm
printing them, but maybe we only want to print errors? This entirely
depends on whether warnings are voluminous things describing e.g. the
inability to emit single types because of name clashes or something.
There are no users of this infrastructure yet, so it's hard to say.)
There is no internationalization here yet, but this at least adds a
place where internationalization can be added, to one of
ctf_errwarning_next or ctf_err_warn.
We also provide a new ctf_assert() function which uses this
infrastructure to provide non-fatal assertion failures while emitting an
assert-like string to the caller: to save space and avoid needlessly
duplicating unchanging strings, the assertion test is inlined but the
print-things-out failure case is not. All assertions in libctf will be
converted to use this machinery in future commits and propagate
assertion-failure errors up, so that the linker in particular cannot be
killed by libctf assertion failures when it could perfectly well just
print warnings and drop the CTF section.
include/
* ctf-api.h (ECTF_INTERNAL): Adjust error text.
(ctf_errwarning_next): New.
libctf/
* ctf-impl.h (ctf_assert): New.
(ctf_err_warning_t): Likewise.
(ctf_file_t) <ctf_errs_warnings>: Likewise.
(ctf_err_warn): New prototype.
(ctf_assert_fail_internal): Likewise.
* ctf-inlines.h (ctf_assert_internal): Likewise.
* ctf-open.c (ctf_file_close): Free ctf_errs_warnings.
* ctf-create.c (ctf_serialize): Copy it on serialization.
* ctf-subr.c (ctf_err_warn): New, add an error/warning.
(ctf_errwarning_next): New iterator, free and pass back
errors/warnings in succession.
* libctf.ver (ctf_errwarning_next): Add.
ld/
* ldlang.c (lang_ctf_errs_warnings): New, print CTF errors
and warnings. Assert when libctf asserts.
(lang_merge_ctf): Call it.
(land_write_ctf): Likewise.
binutils/
* objdump.c (ctf_archive_member): Print CTF errors and warnings.
* readelf.c (dump_ctf_archive_member): Likewise.
|
|
readelf * readelf.c (parse_args): Silence potential warnings about a
memory resource leak when allocating space for ctf option values.
(dump_section_as_ctf): Fix typo checking dump_ctf_strtab_name
variable.
libctf * ctf-archive.c (ctf_arc_write): Avoid calling close twice on the
same file descriptor.
|
|
Support GNU_PROPERTY_X86_FEATURE_2_TMM in
https://gitlab.com/x86-psABIs/x86-64-ABI/-/merge_requests/1
#define GNU_PROPERTY_X86_FEATURE_2_TMM (1U << 10)
binutils/
* readelf.c (decode_x86_feature_2): Handle
GNU_PROPERTY_X86_FEATURE_2_TMM.
gas/
* config/tc-i386.c (output_insn): Check i.xstate to set
GNU_PROPERTY_X86_FEATURE_2_TMM.
* testsuite/gas/i386/i386.exp: Run x86-64-property-7,
x86-64-property-8 and x86-64-property-9.
* testsuite/gas/i386/x86-64-property-7.d: New file.
* testsuite/gas/i386/x86-64-property-7.s: Likewise.
* testsuite/gas/i386/x86-64-property-8.d: Likewise.
* testsuite/gas/i386/x86-64-property-8.s: Likewise.
* testsuite/gas/i386/x86-64-property-9.d: Likewise.
* testsuite/gas/i386/x86-64-property-9.s: Likewise.
include/
* elf/common.h (GNU_PROPERTY_X86_FEATURE_2_TMM): New.
|
|
This one isn't just a weird corner case requiring multiple
.PARISC.unwind sections in an object file to trigger the buffer
overflow, it's also a simple bug that would prevent relocations being
applied in the normal case of a single .PARISC.unwind section.
* readelf (slurp_hppa_unwind_table): Set table_len before use
in relocation sanity checks.
|
|
* readelf.c (print_dynamic_symbol): Don't sprintf to buffer to
find string length.
|
|
if they are going to be truncated then "[...]" is displayed at the end. Add a comment line option to disable this enhancement and restore the old behaviour.
PR 26028
binutils* readelf.c (print_symbol): Handle truncation of symbol names.
(options): Add -T/--silent-truncation option.
(parse_args): Handle the option.
(print_dynamic_symbol): Correct calculation of width available to
display symbol name.
* doc/binutils.texi: Document the -T option to readelf.
* NEWS: Mention the new feature.
gas * testsuite/gas/ia64/group-2.d: Add -T option to readelf
command line.
* testsuite/gas/ia64/unwind.d: Likewise.
* testsuite/gas/mmix/bspec-1.d: Likewise.
* testsuite/gas/mmix/bspec-2.d: Likewise.
* testsuite/gas/mmix/comment-1.d: Likewise.
* testsuite/gas/tic6x/scomm-directive-4.d: Likewise.
ld * testsuite/ld-powerpc/powerpc.exp: Add -T option to readelf
command line when running some tests.
* testsuite/ld-arm/arm-elf.exp: Likewise.
* testsuite/ld-mips-elf/mips-elf.exp: Likewise.
* testsuite/ld-mmix/local1.d: Likewise.
* testsuite/ld-mmix/local3.d: Likewise.
* testsuite/ld-mmix/local5.d: Likewise.
* testsuite/ld-mmix/local7.d: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Likewise.
|
|
objdump and readelf have one major CTF-related behavioural difference:
objdump can read .ctf sections that contain CTF archives and extract and
dump their members, while readelf cannot. Since the linker often emits
CTF archives, this means that readelf intermittently and (from the
user's perspective) randomly fails to read CTF in files that ld emits,
with a confusing error message wrongly claiming that the CTF content is
corrupt. This is purely because the archive-opening code in libctf was
needlessly tangled up with the BFD code, so readelf couldn't use it.
Here, we disentangle it, moving ctf_new_archive_internal from
ctf-open-bfd.c into ctf-archive.c and merging it with the helper
function in ctf-archive.c it was already using. We add a new public API
function ctf_arc_bufopen, that looks very like ctf_bufopen but returns
an archive given suitable section data rather than a ctf_file_t: the
archive is a ctf_archive_t, so it can be called on raw CTF dictionaries
(with no archive present) and will return a single-member synthetic
"archive".
There is a tiny lifetime tweak here: before now, the archive code could
assume that the symbol section in the ctf_archive_internal wrapper
structure was always owned by BFD if it was present and should always be
freed: now, the caller can pass one in via ctf_arc_bufopen, wihch has
the usual lifetime rules for such sections (caller frees): so we add an
extra field to track whether this is an internal call from ctf-open-bfd,
in which case we still free the symbol section.
include/
* ctf-api.h (ctf_arc_bufopen): New.
libctf/
* ctf-impl.h (ctf_new_archive_internal): Declare.
(ctf_arc_bufopen): Remove.
(ctf_archive_internal) <ctfi_free_symsect>: New.
* ctf-archive.c (ctf_arc_close): Use it.
(ctf_arc_bufopen): Fuse into...
(ctf_new_archive_internal): ... this, moved across from...
* ctf-open-bfd.c: ... here.
(ctf_bfdopen_ctfsect): Use ctf_arc_bufopen.
* libctf.ver: Add it.
binutils/
* readelf.c (dump_section_as_ctf): Support .ctf archives using
ctf_arc_bufopen. Automatically load the .ctf member of such
archives as the parent of all other members, unless specifically
overridden via --ctf-parent. Split out dumping code into...
(dump_ctf_archive_member): ... here, as in objdump, and call
it once per archive member.
(dump_ctf_indent_lines): Code style fix.
|
|
This unfortunately means conditionalizing out all the libctf code, but
the result is not too unbearably ugly, if a bit repetitive. I have
stubbed out code in the !ENABLE_LIBCTF path to avoid extra redundant
ifdefs where it seems that might be helpful. (The stubs are not too
disruptive, but I've tried to keep them on one line where possible to
avoid filling up the screen with stubs that nobody would care about.
If this is too much of a coding style violation I can change it.)
Changes since v2: use GCC_ENABLE rather than repeating all the
AC_ARG_ENABLE stuff over and over again.
ld/
* configure.ac [--enable-libctf]: New, default yes.
Set ENABLE_LIBCTF accordingly.
* Makefile.am [!ENABLE_LIBCTF]: Empty LIBCTF.
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* ldlang.c (ctf_output): Conditionalize on ENABLE_LIBCTF.
(ldlang_open_ctf): Likewise.
(lang_merge_ctf): Likewise.
(ldlang_ctf_apply_strsym): Likewise.
(lang_write_ctf): Likewise.
(ldlang_write_ctf_late): Likewise.
(ldlang_open_ctf) [!ENABLE_LIBCTF]: Warn about the presence of CTF
sections.
(lang_merge_ctf) [!ENABLE_LIBCTF]: New stub.
(ldlang_ctf_apply_strsym) [!ENABLE_LIBCTF]: Likewise.
(lang_write_ctf) [!ENABLE_LIBCTF]: Likewise.
(ldlang_write_ctf_late) [!ENABLE_LIBCTF]: Likewise.
* ldelfgen.c (ldelf_emit_ctf_early): Conditionalize on
ENABLE_LIBCTF.
(struct ctf_strsym_iter_cb_arg): Likewise.
(ldelf_ctf_strtab_iter_cb): Likewise.
(ldelf_ctf_symbols_iter_cb): Likewise.
(ldelf_examine_strtab_for_ctf): Likewise.
(ldelf_emit_ctf_early) [!ENABLE_LIBCTF]: New stub.
(ldelf_examine_strtab_for_ctf) [!ENABLE_LIBCTF]: New stub.
binutils/
* configure.ac [--enable-libctf]: New, default yes.
Set ENABLE_LIBCTF accordingly.
* Makefile.am [!ENABLE_LIBCTF]: Empty LIBCTF and LIBCTF_NOBFD.
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* objdump.c (usage): Conditionalize portions on ENABLE_LIBCTF.
(option_values): Likewise.
(long_options): Likewise.
(main): Likewise.
(dump_ctf_indent_lines): Conditionalize out when !ENABLE_LIBCTF.
(make_ctfsect): Likewise.
(dump_ctf_archive_member): Likewise.
(dump_ctf) [ENABLE_LIBCTF]: Likewise.
(dump_ctf) [!ENABLE_LIBCTF]: New empty stub.
* readelf.c (options): Conditionalize portions on ENABLE_LIBCTF.
(usage): Likewise.
(process_section_contents): Likewise.
(shdr_to_ctf_sect): Conditionalize out when !ENABLE_LIBCTF.
(dump_ctf_indent_lines): Likewise.
(dump_section_as_ctf) [ENABLE_LIBCTF]: Likewise.
|
|
This patch adds GNU attribute support to m68k and utilises it to tag the
floating-point calling convention used (hard-float or soft-float). It enables
the linker to ensure linked objects use a consistent floating-point ABI and
allows tools like GDB to infer the ABI used from the ELF file. It is based on
similar work done for PowerPC.
bfd/
* elf32-m68k.c (m68k_elf_merge_obj_attributes): New function.
(elf32_m68k_merge_private_bfd_data): Merge GNU attributes.
binutils/
* readelf.c (display_m68k_gnu_attribute): New function.
(process_arch_specific): Call display_m68k_gnu_attribute for EM_68K.
gas/
* config/tc-m68k.c (m68k_elf_gnu_attribute): New function.
(md_pseudo_table): Handle "gnu_attribute".
* doc/as.texi: Document GNU attribute for M68K.
include/
* elf/m68k.h: Add enum for GNU object attribute with floating point
tag name and values.
ld/
* testsuite/ld-m68k/attr-gnu-4-0.s: New file.
* testsuite/ld-m68k/attr-gnu-4-1.s: Likewise.
* testsuite/ld-m68k/attr-gnu-4-2.s: Likewise.
* testsuite/ld-m68k/attr-gnu-4-00.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-01.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-02.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-10.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-11.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-12.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-20.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-21.d: Likewise.
* testsuite/ld-m68k/attr-gnu-4-22.d: Likewise.
* testsuite/ld-m68k/m68k.exp: Run the new tests.
|
|
operands found in DWARF-5 .debug_macro sections.
PR 26112
* dwarf.c (display_debug_str_offsets): Add code to display the
contents of the .debug_str_offsets section.
(display_debug_macro): Add support for DW_MACRO_define_strx and
DW_MACRO_undef_strx.
|
|
Let's do without that unnecessary internal option buffer. This also
fixes another bug in that the REGINFO data was being taken from the
calloc'd internal option buffer, so was all zeros.
* readelf.c (process_mips_specific): Don't alloc memory for
Elf_Internal_Options.
|
|
DT_MIPS_OPTIONS is not a regular array as assumed by readelf. This
patch corrects that assumption, and to do so easily, makes various
internal (host byte order) structs the same size as external (target
byte order) structs.
include/
* elf/mips.h (Elf32_RegInfo): Use fixed width integer types.
(Elf64_Internal_RegInfo, Elf_Internal_Options): Likewise.
binutils/
* readelf.c (process_mips_specific): Assert size of internal
types match size of external types, and simplify allocation of
internal buffer. Catch possible integer overflow when sanity
checking option size. Don't assume options are a regular array.
Sanity check reginfo option against option size. Use PRI macros
when printing.
|
|
* addr2line.c: Replace "if (x) free (x)" with "free (x)" throughout.
* dlltool.c: Likewise.
* elfcomm.c: Likewise.
* rddbg.c: Likewise.
* readelf.c: Likewise.
* stabs.c: Likewise.
* windmc.c: Likewise.
* windres.c: Likewise.
* wrstabs.c: Likewise.
|
|
* readelf.c (get_num_dynamic_syms): Bounds check mipsxlat array
access.
|
|
discrepancies between the dynamic tags and the dynamic sections.
PR binutils/25809
* readelf.c (process_program_headers): Warn if the PT_DYNAMIC
segment doesn't match the .dynamic section and checks are
enabled.
(struct filedata): Add dynamic_symtab_section and
dynamic_strtab_section fields.
(process_section_headers): Set dynamic_symtab_section to the
.dynsym section. Set dynamic_strtab_section to the .dynstr
section.
(process_dynamic_section): Warn if the .dynsym section doesn't
match DT_SYMTAB and DT_SYMENT or the .dynstr section doesn't
DT_STRTAB and DT_STRSZ. But only if checks are enabled.
|
|
examined. Fix bug displaying empty file name tables.
binutils* dwarf.c (do_checks): New global variable.
(display_formatted_table): Warn about an unexpected number of
columns in the table, if checks are enabled. Do not complain
about the lack of data following the number of entries in the
table if the table is empty.
(display_debug_lines_decoded): Only warn about an unexpected
number of columns in a table if checks are enabled.
* dwarf.h (do_checks): Add a prototype.
* elfcomm.c (error): Remove weak attribute.
(warn): Likewise.
* readelf.c (do_checks): Delete.
(warn): Delete.
(process_section_headers): Only warn about empty sections if
checks are enabled.
gas * dwarf2dbg.c (out_dir_and_file_list): Add comments describing the
construction of a DWARF-5 directory name table.
* testsuite/gas/elf/pr25917.d: Update expected output.
|
|
* readelf.c (process_nds32_specific): Check size of .nds32_e_flags
section. Don't assume endian of host matches nds32 target. Free
buffer.
|
|
detected. Disable all warnings unless the (new) lint mode is enabled.
* readelf.c (warn): New function - like elfcomm.c version but only
produces output if warnings are enabled.
(struct options): Add --lint and --enable-checks.
(usage): Add entry for --lint.
(parse_args): Handle -L. If checks are enabled but no dumps have
been selected then enable all dumps.
(process_section_headers): Replace long if-then-else sequence with
a switch. Add warning messages for empty SHT_REL, SHT_RELA and
SHT_PROGBITS sections.
(process_file): Do not complain if the file is an archive and lint
mode has been enabled.
* elfcomm.c (error): Make the function weak.
(warn): Likewise.
* NEWS: Mention the new feature.
* doc/binutils.texi: Document the new feature.
* dwarf.h (report_leb_status): Add file name and line number
parameters. Include them in the diagnostic output.
(READ_ULEB): Pass file and line number to report_leb_status.
(READ_SLEB): Likewise.
* dwarf.c (read_and_print_leb128): Pass file and line number to
report_leb_status.
* testsuite/binutils-all/readelf.exp: Add test of new feature.
* testsuite/binutils-all/zero-sec.s: New test source file.
* testsuite/binutils-all/zero-sec.r: Expected output from new
test.
|
|
This fixes another missing error check.
* readelf.c (get_num_dynamic_syms): Check DT_MIPS_XHASH was
read before dereferencing, and gracefully return. Remove
gnu_hash_error variable. Free gnu hash arrays if number of
syms found is zero.
|
|
This fixes some code that assumed only one PT_LOAD would contain
DT_SYMTAB. Which is normally the case, but fuzzers thoroughly mess
with object files.
* readelf.c (get_num_dynamic_syms): Check for nbuckets and nchains
non-zero.
(process_dynamic_section): Call get_num_dynamic_syms once rather
than in segment loop. Break out of segment loop on a successful
load of dynamic symbols. Formatting.
(process_object): Return error status from process_dynamic_section.
|
|
When a coredump is generated, there are a few registers in
ARC HS that are put under a special section, namely ".reg-v2".
It is for backward compatibility reasons with older tools that
we have decided not to extend the generic ".reg" section.
This patch makes it possible to display the information better
regarding that section. Compare the output of "readelf" without
and with these changes:
$ readelf -n core # without the patch
...
LINUX 0x0000000c Unknown note type: (0x00000600)
description data: 78 08 00 00 2f 6c 64 2d 75 43 6c 69
$ readelf -n core # with the patch
...
LINUX 0x0000000c NT_ARC_V2 (ARC HS accumulator/extra registers)
description data: 78 08 00 00 2f 6c 64 2d 75 43 6c 69
In another commit (soon to be submitted), GDB will makes use of these
changes to parse the extra section and its registers.
bfd/ChangeLog
2020-03-26 Anton Kolesov <anton.kolesov@synopsys.com>
* elf-bfd.h (elfcore_write_arc_v2): Add prototype.
* elf.c (elfcore_grok_arc_v2): New function.
(elfcore_grok_note): Call the new function to handle the corresponding
note.
(elfcore_write_arc_v2): New function.
(elfcore_write_register_note): Call the new function to handle the
corresponding pseudo-sections.
binutils/ChangeLog
2020-03-26 Anton Kolesov <anton.kolesov@synopsys.com>
* readelf.c (get_note_type): Handle NT_ARC_V2.
include/elf/ChangeLog
2020-03-26 Anton Kolesov <anton.kolesov@synopsys.com>
* common.h (NT_ARC_V2): New macro definitions.
|
|
Introduce new relaxations XTENSA_PDIFF{8,16,32} for positive differences
(subtracted symbol precedes diminished symbol) and XTENSA_NDIFF{8,16,32}
for negative differences (subtracted symbol follows diminished symbol).
Don't generate XTENSA_DIFF relocations in the assembler, generate
XTENSA_PDIFF or XTENSA_NDIFF based on relative symbol position.
Handle XTENSA_DIFF in BFD for compatibility with old object files.
Handle XTENSA_PDIFF and XTENSA_NDIFF in BFD, treating difference value
as unsigned.
2020-04-22 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* bfd-in2.h: Regenerated.
* elf32-xtensa.c (elf_howto_table): New entries for
R_XTENSA_PDIFF{8,16,32} and R_XTENSA_NDIFF{8,16,32}.
(elf_xtensa_reloc_type_lookup, elf_xtensa_do_reloc)
(relax_section): Add cases for R_XTENSA_PDIFF{8,16,32} and
R_XTENSA_NDIFF{8,16,32}.
* libbfd.h (bfd_reloc_code_real_names): Add names for
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32}.
* reloc.c: Add documentation for BFD_RELOC_XTENSA_PDIFF{8,16,32}
and BFD_RELOC_XTENSA_NDIFF{8,16,32}.
binutils/
* readelf.c (is_none_reloc): Recognize
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32}.
gas/
* config/tc-xtensa.c (md_apply_fix): Replace
BFD_RELOC_XTENSA_DIFF{8,16,32} generation with
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32} generation.
* testsuite/gas/xtensa/loc.d: Replace BFD_RELOC_XTENSA_DIFF16
with BFD_RELOC_XTENSA_PDIFF16 in the expected output.
include/
* elf/xtensa.h (elf_xtensa_reloc_type): New entries for
R_XTENSA_PDIFF{8,16,32} and R_XTENSA_NDIFF{8,16,32}.
ld/
* testsuite/ld-xtensa/relax-loc.d: New test definition.
* testsuite/ld-xtensa/relax-loc.s: New test source.
* testsuite/ld-xtensa/xtensa.exp (relax-loc): New test.
|
|
The idea here is to get rid of a lot of file related static vars used
to pass data around, in order to not have stale data about one object
file persisting to the next one.
* readelf.c (archive_file_offset, archive_file_size, dynamic_addr),
(dynamic_size, dynamic_nent, dynamic_strings, dynamic_strings_length),
(num_dynamic_syms, nbuckets, nchains, buckets, chains),
(ngnubuckets, gnubuckets, gnuchains, mipsxlat, ngnuchains),
(gnusymidx, dynamic_symbols, dynamic_syminfo, dynamic_syminfo_offset),
(dynamic_syminfo_nent, program_interpreter, dynamic_info),
(dynamic_info_DT_GNU_HASH, dynamic_info_DT_MIPS_XHASH, version_info),
(dynamic_section, symtab_shndx_list, group_count, section_groups),
(section_headers_groups): Move to struct filedata. Update use
throughout file.
|
|
Don't use a struct filedata for cmdline, which only needs two of the
filedata fields.
* readelf.c (struct dump_data): New, used..
(cmdline): ..here, and..
(struct filedata): ..here. Adjust all uses.
(request_dump_bynumber, request_dump, parse_args): Pass in a
struct dump_data* rather than Filedata*. Adjust callers.
(main): Don't set cmdline.file_name.
|
|
|
|
This is another one where not cleaning up sufficiently after
processing one file can lead to errors when processing the next file.
We have ngnuchains non-zero but gnuchains NULL in the following:
off < ngnuchains && (gnuchains[off] & 1) == 0
* readelf.c (process_symbol_table): Clear ngnuchains, ngnubuckets
and nbuckets.
|
|
This patch is aimed at fixing a number of oss-fuzz segfaults that
don't reproduce reliably with their current infrastructure, the
problem being that one invocation of readelf is effectively being run
on multiple object files. I believe that these segfaults could be
reliably reproduced with just two fuzzed objects being presented to
readelf, but those inputs are currently not identified by oss-fuzz.
So there is some guesswork involved in this patch. The idea here is
to clear stashed data such as symtab_shndx_list that is processed
using section header info, at the same time that header info is
cleared.
* readelf.c (process_section_headers): Free dynamic symbols etc.
earlier.
|
|
This fixes two leaks found in the new code supporting display of
dynamic symbols retrieved via dynamic tags.
* readelf.c (get_num_dynamic_syms): Formatting. Don't return
on error without freeing.
(process_dynamic_section): Don't recreate dynamic symbols from
dynamic tag info when the dynamic symbols have already been
read via section headers.
|
|
PR 25822
* readelf.c (get_num_dynamic_syms): Don't set num_of_syms when
reading buckets or chains fails.
|
|
When readelf is processing more than one file, static bss vars won't
start out as zero for the second file unless they are cleared.
* readelf.c (process_symbol_table): Zero gnubuckets, gnuchains
etc. after freeing.
|
|
Translated strings might be larger than the original.
* readelf.c (get_group_flags): Translate text.
(get_file_type, get_symbol_binding, get_symbol_type),
(get_ppc64_symbol_other, get_symbol_other): Increase size of buffer.
|
|
PR 25821
* readelf.c (get_num_dynamic_syms): Typo fix.
|
|
* readelf.c (process_mips_specific): Free eopt and iopt. Avoid
possibility of overflow when checking number of conflicts.
|
|
When reconstructing dynamic symbol table from the PT_DYNAMIC segment,
compute dynamic symbol table size from hash table. For DT_HASH, the
number of dynamic symbol table entries equals the number of chains.
For DT_GNU_HASH/DT_MIPS_XHASH, only defined symbols with non-STB_LOCAL
indings are in hash table. Since DT_GNU_HASH/DT_MIPS_XHASH place all
symbols with STB_LOCAL binding before symbols with other bindings and
all undefined symbols defined ones in dynamic symbol table, the highest
symbol index in DT_GNU_HASH/DT_MIPS_XHASH is the highest dynamic symbol
table index.
Rewrite print_dynamic_symbol to dump dynamic symbol table for --dyn-syms
and --syms --use-dynamic.
binutils/
PR binutils/25707
* readelf.c (nbuckets): New.
(nchains): Likewise.
(buckets): Likewise.
(chains): Likewise.
(ngnubuckets): Likewise.
(gnubuckets): Likewise.
(gnuchains): Likewise.
(mipsxlat): Likewise.
(ngnuchains): Likewise.
(gnusymidx): Likewise.
(VALID_SYMBOL_NAME): Likewise.
(VALID_DYNAMIC_NAME): Use it.
(get_dynamic_data): Moved before process_dynamic_section.
(get_num_dynamic_syms): New function.
(process_dynamic_section): Use DT_SYMTAB, DT_SYMENT, DT_HASH,
DT_GNU_HASH and DT_MIPS_XHASH to reconstruct dynamic symbol
table. Use DT_STRTAB and DT_STRSZ to reconstruct dynamic string
table.
(get_symbol_index_type): Don't print "bad section index" when
there is no section header.
(print_dynamic_symbol): Rewrite.
(process_symbol_table): Call print_dynamic_symbol to dump dynamic
symbol table.
ld/
PR binutils/25707
* testsuite/ld-arm/armthumb-lib.sym: Updated.
* testsuite/ld-arm/farcall-mixed-app.sym: Likewise.
* testsuite/ld-arm/farcall-mixed-app2.sym: Likewise.
* testsuite/ld-arm/fdpic-main-m.sym: Likewise.
* testsuite/ld-arm/fdpic-main.sym: Likewise.
* testsuite/ld-arm/fdpic-shared-m.sym: Likewise.
* testsuite/ld-arm/fdpic-shared.sym: Likewise.
* testsuite/ld-arm/mixed-app.sym: Likewise.
* testsuite/ld-arm/mixed-lib.sym: Likewise.
* testsuite/ld-arm/preempt-app.sym: Likewise.
* testsuite/ld-elf/hash.d: Likewise.
* testsuite/ld-elf/pr13195.d: Likewise.
* testsuite/ld-elfvsb/hidden2.d: Likewise.
* testsuite/ld-mips-elf/hash2.d: Likewise.
|
|
This patch fixes a leak of qualified_name caused by 4c83662712 and a
double free introduced by fd486f32d1. Not breaking out of the loop
results in an error: "failed to seek to next archive header". That's
slightly better than silently preventing the possibility of endless
loops.
* readelf.c (process_archive): Don't double free qualified_name.
Don't break out of loop with "negative" archive_file_size, just
set file offset to max.
|
|
With a crafted "negative" ar_hdr.ar_size it is possible to make
readelf loop. This patch catches the overflow in a file offset
calculation.
* readelf.c (process_archive): Prevent endless loop.
|
|
* readelf.c (process_mips_specific): Free iconf on error path.
|
|
fields in the Elf_Internal_Chdr structure when building readelf.
* readelf.c (get_compression_header): Add ATTRIBUTE_WARN_UNUSED_RESULT.
(process_section_headers): Check the return value from
get_compression_header.
(dump_section_as_strings): Likewise.
(dump_section_as_bytes): Likewise.
(load_specific_debug_section): Likewise.
|
|
process_symbol_table () has
unsigned long num_syms;
...
for (si = 0, psym = symtab; si < num_syms; si++, psym++)
We should use unsigned long to iterate over num_syms.
* readelf.c (process_symbol_table): Use unsigned long for si.
|
|
* readelf.c (process_archive): Always return via path freeing
memory. Formatting.
|
|
* readelf.c (process_netbsd_elf_note): Validate descsz before
accessing descdata. Formatting.
|
|
This extracts code reading symbol tables into a common function that
tidies up after errors. I've also changed an error reporting multiple
string tables to an error on multiple symbol tables.
* readelf.c (get_symbols): New function.
(process_relocs, ia64_process_unwind, hppa_process_unwind),
(arm_process_unwind, get_symbol_for_build_attribute): Use it.
|
|
In git commit fd486f32d15e I put some static variables used by
get_symbol_for_build_attribute in a file scope ba_cache struct. This
was to prevent leaks in get_symbol_for_build_attribute, and to tidy up
before readelf exited. The patch wasn't quite right though. When
readelf processes more than one file it was possible to double free
arrays allocated in get_symbol_for_build_attribute.
* readelf.c (process_file): Clean ba_cache.
|
|
* elfcomm.h (setup_archive): Update prototype.
* elfcomm.c (setup_archive): Add file_size parameter and sanity
check longnames_size.
(setup_nested_archive): Get file size and pass to setup_archive.
* elfedit.c (process_archive): Likewise.
* readelf.c (process_archive): Pass filedata->file_size to
setup_archive.
|
|
* readelf.c (dump_section_as_strings): Free memory on error exit.
(dump_section_as_bytes, process_notes_at): Likewise.
(get_build_id): Free enote.
|
|
bfd/ChangeLog:
* elf.c (elfcore_grok_netbsd_note): Add support for
NT_NETBSDCORE_LWPSTATUS notes.
binutils/ChangeLog:
* readelf.c (get_netbsd_elfcore_note_type): Add support for
NT_NETBSDCORE_LWPSTATUS notes.
include/ChangeLog:
* elf/common.h (NT_NETBSDCORE_LWPSTATUS): New define.
|
|
* elfcomm.c (get_archive_member_name): Always return malloc'd
string or NULL.
* elfedit.c (process_archive): Tidy memory on all return paths.
* readelf.c (process_archive): Likewise.
(process_symbol_table): Likewise.
(ba_cache): New, replacing ..
(get_symbol_for_build_attribute): ..static vars here. Free
strtab and symtab before loading new ones. Reject symtab without
valid strtab in loop, breaking out of loop on valid symtab.
(process_file): Free ba_cache symtab and strtab here, resetting
ba_cache.
|
|
* readelf.c (process_section_headers): Don't just set
filedata->section_headers NULL, free it first. Similarly for
dynamic_symbols, dynamic_strings, dynamic_syminfo and
symtab_shndx_list. Zero associated counts too.
(process_object): Free symtab_shndx_list.
(process_file): Free various allocated filedata tables.
|
|
PR 25645
* readelf.c (dump_ia64_vms_dynamic_fixups): Pass size and nmemb
to get_data rather than multiplying.
(dump_ia64_vms_dynamic_relocs): Likewise.
(process_version_sections): Correct order of size and nmemb args
in get_data call.
(process_mips_specific): Likewise.
|
|
* readelf.c (get_dynamic_data): Replace "memory chekers" with
"memory checkers" in comments.
|