Age | Commit message (Collapse) | Author | Files | Lines |
|
On big endian hosts (eg. s390x) the windmc tool fails to parse even
trivial files:
$ cat test.mc
;
$ ./binutils/windmc ./test.mc
In test.mc at line 1: parser: syntax error.
In test.mc at line 1: fatal: syntax error.
The tool starts by reading the input as Windows CP1252 and then
converting it internally into an array of UTF-16LE, which it then
processes as an array of unsigned short (typedef unichar).
There are lots of ways this is wrong, but in the specific case of big
endian machines the little endian pairs of bytes are byte-swapped.
For example, the ';' character in the input above is first converted
to UTF16-LE byte sequence { 0x3b, 0x00 }, which is then cast to
unsigned short. On a big endian machine the first unichar appears to
be 0x3b00. The lexer is unable to recognize this as the comment
character ((unichar)';') and so parsing fails.
The simple fix is to convert the input to UTF-16BE on big endian
machines (and do the reverse conversion when writing the output).
Fixes: https://sourceware.org/bugzilla/show_bug.cgi?id=31283
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
|
|
* intl: Remove directory. Replaced with out-of-tree GNU gettext.
* .gitignore: Add '/gettext*'.
* configure.ac (host_libs): Replace intl with gettext. (hbaseargs, bbaseargs, baseargs): Split baseargs into {h,b}baseargs. (skip_barg): New flag. Skips appending current flag to bbaseargs. <library exemptions>: Exempt --with-libintl-{type,prefix} from target and build machine argument passing.
* configure: Regenerate.
* Makefile.def (host_modules): Replace intl module with gettext module. (configure-ld): Depend on configure-gettext.
* Makefile.in: Regenerate.
* src-release.sh: Remove references to the intl/ directory.
|
|
Add check for libdebuginfod 0.188 in AC_DEBUGINFOD and if found
define macro HAVE_LIBDEBUGINFOD_FIND_SECTION.
This macro indicates support for downloading ELF sections from
debuginfod servers.
|
|
Changes readelf to make use first of fseeko64 and then fseeko,
depending on which of those is available. If neither is available,
reverts to the previous behavior of using fseek.
This is necessary when building readelf for LLP64 systems, where a
long will only be 32 bits wide. If the elf file in question is >= 2 GiB,
that is greater than the max long value and therefore fseek will fail
indicating that the offset is negative. On such systems, making use of
fseeko64 or fseeko will result in the ability so seek past the 2 GiB
max long boundary.
Note that large archive handling in readelf remains to be fixed.
|
|
default.
PR 29457
* configure.ac: Add --enable-colored-disassembly.
* objdump.c: Add --disassembler-color=terminal.
* doc/binutils.texi (objdump): Document the new option.
* NEWS: Mention new feature.
* config.in: Regenerate in.
* configure: Regenerate.
|
|
PR29397 PR29563: Add new configure option --with-zstd which defaults to
auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support
zstd compressed debug sections for most tools.
* bfd: for addr2line, objdump --dwarf, gdb, etc
* gas: support --compress-debug-sections=zstd
* ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd
* objcopy: support ELFCOMPRESS_ZSTD input for
--decompress-debug-sections and --compress-debug-sections=zstd
* gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd
symbols, so gdb has to link against -lzstd in this patch.
If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We
can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this
is too heavyweight, so don't do it for now.
```
% ld/ld-new a.o
ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
% ld/ld-new a.o --compress-debug-sections=zstd
ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support
% binutils/objcopy --compress-debug-sections=zstd a.o b.o
binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support
% binutils/objcopy b.o --decompress-debug-sections
binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support
...
```
|
|
This replaces dwarf_vma, dwarf_size_type and dwarf_signed_vma with
uint64_t and int64_t everywhere. The patch also gets rid of
DWARF_VMA_FMT since we can't use that with uint64_t, and all of the
configure support for deciding the flavour of HOST_WIDEST_INT.
dwarf_vmatoa also disappears, replacing most uses with one of
PRIx64, PRId64 or PRIu64. Printing of size_t and ptrdiff_t values
now use %z and %t rather than by casting to unsigned long. Also,
most warning messages that used 0x%lx or similar now use %#lx and a
few that didn't print the 0x hex prefix now also use %#. The patch
doesn't change normal readelf output, except in odd cases where values
previously might have been truncated.
|
|
sbrk hasn't been used in binutils/ or ld/ for quite some time (so the
PR was fixed a while ago). Tidy up configury.
PR 17122
binutils/
* configure.ac: Don't check for sbrk.
* sysdep.h (sbrk): Don't supply fallback declaration.
* config.in: Regenerate.
* configure: Regenerate.
ld/
* configure.ac: Don't check for sbrk.
* config.in: Regenerate.
* configure: Regenerate.
|
|
The AMDGPU HSA OS ABI (code object v3 and above) defines the
NT_AMDGPU_METADATA ELF note [1]. The content is a msgpack object
describing, among other things, the kernels present in the code object
and how to call them.
I think it would be useful for readelf to be able to display the content
of those notes. msgpack is a structured format, a bit like JSON, except
not text-based. It is therefore possible to dump the contents in
human-readable form without knowledge of the specific layout of the
note.
Add configury to binutils to optionally check for the msgpack C library
[2]. Add There is a new --with{,out}-msgpack configure flag, and the actual
library lookup is done using pkg-config.
If msgpack support is enabled, dumping a NT_AMDGPU_METADATA note looks
like:
$ readelf --notes amdgpu-code-object
Displaying notes found in: .note
Owner Data size Description
AMDGPU 0x0000040d NT_AMDGPU_METADATA (code object metadata)
{
"amdhsa.kernels": [
{
".args": [
{
".address_space": "global",
".name": "out.coerce",
".offset": 0,
".size": 8,
".value_kind": "global_buffer",
},
<snip>
If msgpack support is disabled, dump the contents as hex, as is done
with notes that are not handled in a special way. This allows one to
decode the contents manually (maybe using a command-line msgpack
decoder) if really needed.
[1] https://llvm.org/docs/AMDGPUUsage.html#code-object-metadata
[2] https://github.com/msgpack/msgpack-c/tree/c_master
binutils/ChangeLog:
* Makefile.am (readelf_CFLAGS): New.
(readelf_LDADD): Add MSGPACK_LIBS.
* Makefile.in: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* configure.ac: Add --with-msgpack flag and check for msgpack
using pkg-config.
* readelf.c: Include msgpack.h if HAVE_MSGPACK.
(print_note_contents_hex): New.
(print_indents): New.
(dump_msgpack_obj): New.
(dump_msgpack): New.
(print_amdgpu_note): New.
(process_note): Handle NT_AMDGPU_METADATA note contents.
Use print_note_contents_hex.
Change-Id: Ia60a654e620bc32dfdb1bccd845594e2af328b84
|
|
binutils currently fails to compile on Solaris 10:
/vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c: In function 'bfd_get_debug_link_info_1':
/vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c:1231:16: error: implicit declaration of function 'strnlen' [-Werror=implicit-function-declaration]
1231 | crc_offset = strnlen (name, size) + 1;
| ^~~~~~~
/vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c:1231:16: error: incompatible implicit declaration of built-in function 'strnlen' [-Werror]
/vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c: In function 'bfd_get_alt_debug_link_info':
/vol/src/gnu/binutils/hg/binutils-2.37-branch/git/bfd/opncls.c:1319:20: error: incompatible implicit declaration of built-in function 'strnlen' [-Werror]
1319 | buildid_offset = strnlen (name, size) + 1;
| ^~~~~~~
and in a couple of other places. The platform lacks strnlen, and while
libiberty.h can provide a fallback declaration, the necessary configure
test isn't run.
Fixed with the following patch. Tested on i386-pc-solaris2.10.
2021-07-06 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
bfd:
* configure.ac: Check for strnlen declaration.
* configure, config.in: Regenerate.
binutils:
* configure.ac: Check for strnlen declaration.
* configure, config.in: Regenerate.
|
|
Nanosecond rather than second resolution.
PR 27725
* configure.ac: Check for sys/time.h and utimensat. Use standard
checks for mkstemp and mkdtemp. Whitespace. Check for nanosecond
members of struct stat.
* rename.c: Prefer sys/time.h for utimes over utime.h for utime.
(STAT_TIMESPEC, STAT_TIMESPEC_NS): Define
(get_stat_atime_ns, get_stat_mtime_ns): New inline functions.
(get_stat_atime, get_stat_mtime): Likewise.
(set_times): Choose first available of utimensat, utimes, utime.
Use above inline functions to set timespec and timeval values.
* configure: Regenerate.
* config.in: Regenerate.
* testsuite/binutils-all/objcopy.exp (objcopy_test): Add test of
file timestamp when --preserve-dates is used.
|
|
gas already has this. Here it enables checking hash table type passed
to elf_link_hash_lookup and elf_link_hash_traverse.
bfd/
* elf-bfd.h (ENABLE_CHECKING): Define.
(elf_link_hash_lookup): Abort if wrong type of hash table.
(elf_link_hash_traverse): Likewise.
* configure.ac (--enable-checking): Add support.
* config.in: Regenerate.
* configure: Regenerate.
binutils/
* configure.ac (--enable-checking): Add support.
* config.in: Regenerate.
* configure: Regenerate.
ld/
* configure.ac (--enable-checking): Add support.
* config.in: Regenerate.
* configure: Regenerate.
opcodes/
* configure.ac (--enable-checking): Add support.
* config.in: Regenerate.
* configure: Regenerate.
|
|
* configure.ac: Assume long long is available. Don't test for
strings.h, stdlib.h, limits.h, locale.h, or wchar.h. Check
inttypes.h, stdint.h, sys/stat.h and sys/types.h. Don't check for
strcoll, setlocale, setmode or location of time_t. Don't check
for fprintf, getenv, snprintf, strnlen, strstr or vsnprintf decls.
(AC_ISC_POSIX, AXC_HEADER_STRING, AC_FUNC_ALLOCA): Don't invoke.
* sysdep.h: Don't include alloca-conf.h, include config.h instead.
Test HAVE_SYS_TYPES_H and reorder includes. Include limits.h,
locale.h, string.h and stdlib.h unconditionally. Remove various
fallback declarations. Assume long long is available.
* addr2line.c: Don't test HAVE_SETLOCALE.
* ar.c: Likewise.
* coffdump.c: Likewise.
* dlltool.c: Likewise.
* dllwrap.c: Likewise.
* elfedit.c: Likewise.
* nm.c: Likewise.
* objcopy.c: Likewise.
* objdump.c: Likewise.
* readelf.c: Likewise.
* size.c: Likewise.
* srconv.c: Likewise.
* strings.c: Likewise.
* sysdump.c: Likewise.
* windmc.c: Likewise.
* windres.c: Likewise.
* bucomm.c: Don't test HAVE_TIME_T_IN_TIME_H or HAVE_TIME_T_IN_TYPES_H.
* dwarf.c: Include limits.h unconditionally. Assume long long
is available.
* nm.c: Don't test HAVE_STRCOLL.
* readelf.c: Don't test HAVE_WCHAR_H.
* strings.c: Assume long long is available.
* syslex.l: Include string.h unconditionally.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
|
|
follow links to separate debug info files.
* configure.ac (follow-debug-links): Add option to enable or
disable the following of debug links by default. Set the
default for the option to be 'follow'.
* dwarf.c (do_follow_links): Initialise with DEFAULT_FOR_FOLLOW_LINKS.
(dwarf_select_sections_by_names): Add no-follow-links option.
(dwarf_select_sections_by_letter): Add 'N' option.
* objdump.c (usage): Add conditional text describing the
follow links option.
(slurp_symtab): Ensure that there is a NULL entry at the end
of the symbol table.
(slurp_dynamic_symtab): Likewise.
(dump_bfd): When extending the symbol table, ensure that there
is still a NULL entry at the end.
* readelf.c (usage): Add conditional text describing the
follow links option.
* doc/binutils.texi: Update documentation for objcopy and
readelf.
* doc/debug.options.texi: Update documentation of the
follow-links option.
* config.in: Regenerate.
* configure: Regenerate.
* testsuite/binutils-all/compress.exp: Add the -WN option to
objdump command lines that are not expecting to follow links.
* testsuite/binutils-all/readelf.exp: Add the
--debug-dump=no-follow-links option to tests that are not
expecting to follow debug links.
gas * testsuite/gas/mach-o/sections-1.d: Stop automatic debug link
following.
* testsuite/gas/xgate/insns-dwarf2.d: Likewise.
ld * testsuite/ld-elf/sec64k.exp: Stop readelf from automatically
following debug links.
|
|
a configure time option to change the default characters.
PR 22967
* nm.c (ifunc_type_chars): New variable.
(long_options): Add --ifunc-chars.
(print_symbol): Use ifunc_type_chars for ifunc symbols.
(main): Handle the new option.
* doc/binutils.texi: Document the new option.
* configure.ac: Add --enable-f-for-ifunc-symbols option which
changes the default symbol displayed by nm.
* NEWS: Mention the new feature.
* testsuite/binutils-all/nm.exp: Test the new feature.
* config.in: Regenerate.
* configure: Regenerate.
|
|
This unfortunately means conditionalizing out all the libctf code, but
the result is not too unbearably ugly, if a bit repetitive. I have
stubbed out code in the !ENABLE_LIBCTF path to avoid extra redundant
ifdefs where it seems that might be helpful. (The stubs are not too
disruptive, but I've tried to keep them on one line where possible to
avoid filling up the screen with stubs that nobody would care about.
If this is too much of a coding style violation I can change it.)
Changes since v2: use GCC_ENABLE rather than repeating all the
AC_ARG_ENABLE stuff over and over again.
ld/
* configure.ac [--enable-libctf]: New, default yes.
Set ENABLE_LIBCTF accordingly.
* Makefile.am [!ENABLE_LIBCTF]: Empty LIBCTF.
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* ldlang.c (ctf_output): Conditionalize on ENABLE_LIBCTF.
(ldlang_open_ctf): Likewise.
(lang_merge_ctf): Likewise.
(ldlang_ctf_apply_strsym): Likewise.
(lang_write_ctf): Likewise.
(ldlang_write_ctf_late): Likewise.
(ldlang_open_ctf) [!ENABLE_LIBCTF]: Warn about the presence of CTF
sections.
(lang_merge_ctf) [!ENABLE_LIBCTF]: New stub.
(ldlang_ctf_apply_strsym) [!ENABLE_LIBCTF]: Likewise.
(lang_write_ctf) [!ENABLE_LIBCTF]: Likewise.
(ldlang_write_ctf_late) [!ENABLE_LIBCTF]: Likewise.
* ldelfgen.c (ldelf_emit_ctf_early): Conditionalize on
ENABLE_LIBCTF.
(struct ctf_strsym_iter_cb_arg): Likewise.
(ldelf_ctf_strtab_iter_cb): Likewise.
(ldelf_ctf_symbols_iter_cb): Likewise.
(ldelf_examine_strtab_for_ctf): Likewise.
(ldelf_emit_ctf_early) [!ENABLE_LIBCTF]: New stub.
(ldelf_examine_strtab_for_ctf) [!ENABLE_LIBCTF]: New stub.
binutils/
* configure.ac [--enable-libctf]: New, default yes.
Set ENABLE_LIBCTF accordingly.
* Makefile.am [!ENABLE_LIBCTF]: Empty LIBCTF and LIBCTF_NOBFD.
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* objdump.c (usage): Conditionalize portions on ENABLE_LIBCTF.
(option_values): Likewise.
(long_options): Likewise.
(main): Likewise.
(dump_ctf_indent_lines): Conditionalize out when !ENABLE_LIBCTF.
(make_ctfsect): Likewise.
(dump_ctf_archive_member): Likewise.
(dump_ctf) [ENABLE_LIBCTF]: Likewise.
(dump_ctf) [!ENABLE_LIBCTF]: New empty stub.
* readelf.c (options): Conditionalize portions on ENABLE_LIBCTF.
(usage): Likewise.
(process_section_contents): Likewise.
(shdr_to_ctf_sect): Conditionalize out when !ENABLE_LIBCTF.
(dump_ctf_indent_lines): Likewise.
(dump_section_as_ctf) [ENABLE_LIBCTF]: Likewise.
|
|
a configure time option).
debuginfod is a lightweight web service that indexes ELF/DWARF
debugging resources by build-id and serves them over HTTP. This patch
enables objdump and readelf to query debuginfod servers when they are
otherwise not able to find separate debug files. Binutils can be built
with debuginfod using the --with-debuginfod configure option. This
requires that libdebuginfod be installed and found at configure time.
debuginfod is packaged with elfutils, starting with version 0.178. For
more information see https://sourceware.org/elfutils/.
toplevel* config/debuginfod.m4: New file. Add macro AC_DEBUGINFOD. Adds
new configure option --with-debuginfod.
* configure: Regenerate.
* configure.ac: Call AC_DEBUGINFOD.
binutils* Makefile.am (readelf_LDADD, objdump_LDADD): Add libdebuginfod.
* Makefile.in: Regenerate.
* NEWS: Update.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: Call AC_DEBUGINFOD.
* doc/Makefile.in: Regenerate.
* doc/binutils.texi: Add section on using binutils
with debuginfod.
* dwarf.c (debuginfod_fetch_separate_debug_info): New function.
Query debuginfod servers for the target debug file.
(load_separate_debug_info): Call
debuginfod_fetch_separate_debug_info if configured with
debuginfod.
(load_separate_debug_files): Add file argument to
load_separate_debug_info calls.
* dwarf.h (get_build_id): Add declaration.
* objdump.c (get_build_id): New function. Get build-id of file.
* readelf.c (get_build_id): Likewise.
* testsuite/binutils-all/debuginfod.exp: New tests.
* testsuite/binutils-all/linkdebug.s: Add .note.gnu.build-id
section.
|
|
Revert:
binutls 2019-05-29 Nick Clifton <nickc@redhat.com>
* configure.ac (LIBCTF): Export. Set to empty for non-ELF based
targets.
(HAVE_LIBCTF): Define if libctf support is available.
* Makefile.am (LIBCTF): Set value to @LIBCTF@.
* objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
defined.
* readelf.c: Likewise.
* configure: Regenerate.
* Makefile.in: Regenerate.
* config.in: Regenerate.
top 2019-05-29 Nick Clifton <nickc@redhat.com>
* configure.ac (noconfigdirs): Add libctf if the target does not use
the ELF file format.
* configure: Regenerate.
|
|
top * configure.ac (noconfigdirs): Add libctf if the target does not use
the ELF file format.
* configure: Regenerate.
binutils* configure.ac (LIBCTF): Export. Set to empty for non-ELF based
targets.
(HAVE_LIBCTF): Define if libctf support is available.
* Makefile.am (LIBCTF): Set value to @LIBCTF@.
* objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
defined.
* readelf.c: Likewise.
* configure: Regenerate.
* Makefile.in: Regenerate.
* config.in: Regenerate.
|
|
Add AC_FUNC_MMAP to configure.ac so that HAVE_MMAP will be checked in
objdump.c and mmap is used if available.
* configure.ac (AC_FUNC_MMAP): New.
* config.in: Regenerated.
* configure: Likewise.
|
|
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
|
|
* configure.ac (AC_CHECK_DECLS): Add asprintf.
* config.in: Regenerate.
* configure: Regenerate.
|
|
This patch adds --with-system-zlib and remove --with-zlib in binutils.
* Makefile.am (ZLIB): New.
(ZLIBINC): Likewise.
(AM_CFLAGS): Add $(ZLIBINC).
(readelf_LDADD): Add $(ZLIB).
* configure.ac (AM_ZLIB): Removed.
(zlibdir): New. AC_SUBST.
(zlibinc): Likewise.
Add --with-system-zlib.
* readelf.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
(uncompress_section_contents): Don't check HAVE_ZLIB_H.
* Makefile.in: Regenerated.
* config.in: Likewise.
* configure: Likewise.
|
|
Also fix a place where %lld was wrongly used to print a dwarf_vma.
* configure.ac: Check for long long and sizes of long long and long.
* elfcomm.h (HOST_WIDEST_INT): Test HAVE_LONG_LONG in place of
__STDC_VERSION__ and __GNUC__.
* strings.c (print_strings): Likewise.
* dwarf.c (DWARF_VMA_FMT, DWARF_VMA_FMT_LONG): Likewise.
(read_debug_line_header): Use dwarf_vmatoa to print warning.
* configure: Regenerate.
* config.in: Regenerate.
|
|
--all option which displays text from anywhere in the input file(s). The
default used to be --data, which only displays text from loadable data sections,
but this requires the use of the BFD library. Since the BFD library almost
certainly still contains buffer overrun and/or memory corruption bugs, and
since the strings program is often used to examine malicious code, it was
decided that the --data option option represents a possible security risk.
* strings.c: Add new command line option --data to only scan the
initialized, loadable data secions of binaries. Choose the
default behaviour of --all or --data based upon a configure
option.
* doc/binutils.texi (strings): Update documentation. Include
description of why the --data option might be unsafe.
* configure.ac: Add new option --disable-default-strings-all which
restores the old behaviour of strings using --data by default. If
the option is not used make strings use --all by default.
* NEWS: Mention the new behaviour of strings.
* configure: Regenerate.
* config.in: Regenerate.
|
|
This also makes --enable-plugins default to on for hosts that can
support plugins, so we have consistent lto toolchain support. The
ACX_LARGEFILE moves aren't strictly necessary, but are harmless and
will be necessary if plugin support is extended to more hosts via
libtool's dlopen support. I started down that path then decided it
was more work than I was interested in doing. (ACX_LARGEFILE invokes
AC_PLUGINS.)
config/
* plugins.m4: Test for dlfcn.h or windows.h here to set default
for --enable-plugins. Report error if someone tries to enable
plugins on a host we don't support.
bfd/
* configure.ac: Delete redundant plugin related checks.
* configure: Regenerate.
binutils/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* config.in: Regenerate.
* configure: Regenerate.
gas/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* config.in: Regenerate.
* configure: Regenerate.
gprof/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* configure: Regenerate.
* gconfig.in: Regenerate.
ld/
* configure.ac: Move AC_PROG_CC and other macros earlier. Delete
plugin checks now done in config/plugins.m4.
* config.in: Regenerate.
* configure: Regenerate.
|
|
bfd/
* configure.ac: Rename from configure.in.
* Makefile.in: Regenerate.
* config.in: Regenerate.
* doc/Makefile.in: Regenerate.
opcodes/
* configure.ac: Rename from configure.in.
* Makefile.in: Regenerate.
* config.in: Regenerate.
binutils/
* configure.ac: Rename from configure.in.
* Makefile.in: Regenerate.
* config.in: Regenerate.
* doc/Makefile.in: Regenerate.
gas/
* configure.ac: Rename from configure.in.
* Makefile.in: Regenerate.
* config.in: Regenerate.
* doc/Makefile.in: Regenerate.
gprof/
* configure.ac: Rename from configure.in.
* configure.ac: Rename from configure.in.
* Makefile.in: Regenerate.
* gconfig.in: Regenerate.
ld/
* configure.ac: Rename from configure.in.
* Makefile.in: Regenerate.
* config.in: Regenerate.
|
|
* configure.in: Add strnlen to AC_CHECK_DECLS, sort.
* dwarf.c (strnlen): Provide fallback decl.
* config.in: Regnerate.
* configure: Regenerate.
|
|
__CONFIG_H__ check.
* config.in: Regenerate.
|
|
* elf32-arm.c (elf32_arm_print_private_bfd_data): Recognise and
display the new ARM hard-float/soft-float ABI flags for EABI_VER5
(elf32_arm_post_process_headers): Add the hard-float/soft-float
ABI flag as appropriate for ET_DYN/ET_EXEC in EABI_VER5.
binutils:
* readelf.c (decode_ARM_machine_flags): Recognise and display the
new ARM hard-float/soft-float ABI flags for EABI_VER5. Split out
the code for EABI_VER4 and EABI_VER5 to allow this.
elfcpp:
* arm.h: New enum for EABI soft- and hard-float flags.
gold:
* gold.cc (Target_arm::do_adjust_elf_header): Add the
hard-float/soft-float ABI flag as appropriate for ET_DYN/ET_EXEC
in EABI_VER5.
include:
* elf/arm.h (EF_ARM_ABI_FLOAT_SOFT): New define.
(EF_ARM_ABI_FLOAT_HARD): Likewise.
ld/testsuite:
* ld-arm/eabi-hard-float.s: New test source.
* ld-arm/eabi-soft-float.s: New test source.
* ld-arm/eabi-hard-float.d: New test.
* ld-arm/eabi-soft-float.d: New test.
* ld-arm/eabi-soft-float-ABI4.d: New test.
* ld-arm/eabi-soft-float-r.d: New test.
* ld-arm/arm-elf.xp: Use the new tests.
binutils:
PR binutils/14779
* configure.in: Add checks for wchar.h and mbstate_t.
* config.in: Regenerate.
* configure: Regenerate.
* readelf.c: Conditionally include wchar.h.
(print_symbol): Conditionally use mbstate_t.
|
|
|
|
* aclocal.m4: Regenerate.
* Makefile.in: Regenerate.
binutils/
* aclocal.m4: Regenerate.
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in: Regenerate.
gas/
* aclocal.m4: Regenerate.
* configure: Regenerate.
* Makefile.in: Regenerate.
|
|
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: Generate an error if included before config.h.
* alpha-opc.c: Include sysdep.h before any other header file.
* alpha-dis.c: Likewise.
* avr-dis.c: Likewise.
* cgen-opc.c: Likewise.
* cr16-dis.c: Likewise.
* cris-dis.c: Likewise.
* crx-dis.c: Likewise.
* d10v-dis.c: Likewise.
* d10v-opc.c: Likewise.
* d30v-dis.c: Likewise.
* d30v-opc.c: Likewise.
* h8500-dis.c: Likewise.
* i370-dis.c: Likewise.
* i370-opc.c: Likewise.
* m10200-dis.c: Likewise.
* m10300-dis.c: Likewise.
* micromips-opc.c: Likewise.
* mips-opc.c: Likewise.
* mips61-opc.c: Likewise.
* moxie-dis.c: Likewise.
* or32-opc.c: Likewise.
* pj-dis.c: Likewise.
* ppc-dis.c: Likewise.
* ppc-opc.c: Likewise.
* s390-dis.c: Likewise.
* sh-dis.c: Likewise.
* sh64-dis.c: Likewise.
* sparc-dis.c: Likewise.
* sparc-opc.c: Likewise.
* spu-dis.c: Likewise.
* tic30-dis.c: Likewise.
* tic54x-dis.c: Likewise.
* tic80-dis.c: Likewise.
* tic80-opc.c: Likewise.
* tilegx-dis.c: Likewise.
* tilepro-dis.c: Likewise.
* v850-dis.c: Likewise.
* v850-opc.c: Likewise.
* vax-dis.c: Likewise.
* w65-dis.c: Likewise.
* xgate-dis.c: Likewise.
* xtensa-dis.c: Likewise.
* rl78-decode.opc: Likewise.
* rl78-decode.c: Regenerate.
* rx-decode.opc: Likewise.
* rx-decode.c: Regenerate.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: Generate an error if included before config.h.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* aclocal.m4: Regenerate.
* bfd-in.h: Generate an error if included before config.h.
* sysdep.h: Likewise.
* bfd-in2.h: Regenerate.
* compress.c: Remove #include "config.h".
* plugin.c: Likewise.
* elf32-m68hc1x.c: Include sysdep.h before alloca-conf.h.
* elf64-hppa.c: Likewise.
* som.c: Likewise.
* xsymc.c: Likewise.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* aclocal.m4: Regenerate.
* Makefile.am: Use wrappers around C files generated by flex.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* itbl-lex-wrapper.c: New file.
* config/bfin-lex-wrapper.c: New file.
* cgen.c: Include as.h before setjmp.h.
* config/tc-dlx.c: Include as.h before any other header.
* config/tc-h8300.c: Likewise.
* config/tc-lm32.c: Likewise.
* config/tc-mep.c: Likewise.
* config/tc-microblaze.c: Likewise.
* config/tc-mmix.c: Likewise.
* config/tc-msp430.c: Likewise.
* config/tc-or32.c: Likewise.
* config/tc-tic4x.c: Likewise.
* config/tc-tic54x.c: Likewise.
* config/tc-xtensa.c: Likewise.
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* unwind-ia64.h: Include config.h.
|
|
2012-04-06 Roland McGrath <mcgrathr@google.com>
* configure.in (AC_CHECK_HEADERS): Add locale.h.
* config.in: Regenerate.
* configure: Regenerate.
gas/
2012-04-06 Roland McGrath <mcgrathr@google.com>
* configure.in (AC_CHECK_HEADERS): Add locale.h.
* config.in: Regenerate.
* configure: Regenerate.
gold/
2012-04-06 Roland McGrath <mcgrathr@google.com>
* configure.in (AC_CHECK_HEADERS): Add locale.h.
* config.in: Regenerate.
* configure: Regenerate.
ld/
2012-04-06 Roland McGrath <mcgrathr@google.com>
* configure.in (AC_CHECK_HEADERS): Add locale.h.
* config.in: Regenerate.
* configure: Regenerate.
|
|
(AM_LC_MESSAGES): Add.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
|
|
argument. Set DEFAULT_AR_DETERMINISTIC to 1 or 0 accordingly.
* configure: Regenerated.
* config.in: Regenerated.
* ar.c (deterministic): Initialize to -1.
(decode_options, ranlib_main): Grok U option.
(usage, ranlib_usage): Mention U; say for D and U which is the default.
(default_deterministic): New function.
(ranlib_main): Call it.
(main): Likewise. Make newer_only && deterministic error
non-fatal if it was just DEFAULT_AR_DETERMINISTIC and not the D option.
* doc/binutils.texi (ar cmdline, ranlib): Document U modifier and
--enable-deterministic-archives behavior.
|
|
* configure.in: Stop checking for fopen64 and stat64.
* strings.c (file_off, file_open, statbuf, file_stat): Remove.
(strings_file): Change file_off to file_ptr, file_open to fopen,
statbuf to struct stat and file_stat to stat.
(get_char): Change parameter type file_off * to file_ptr *.
(print_strings): Change parameter and variable `start' type file_off to
file_ptr.
* configure: Regenerate.
* config.in: Regenerate.
|
|
config/:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump to 2.64.
/:
* configure: Regenerate.
etc/:
* configure: Regenerate.
sim/common/:
* config.in: Regenerate.
* configure: Likewise.
sim/iq2000/:
* config.in: Regenerate.
* configure: Likewise.
sim/d10v/:
* config.in: Regenerate.
* configure: Likewise.
sim/igen/:
* config.in: Regenerate.
* configure: Likewise.
sim/m32r/:
* config.in: Regenerate.
* configure: Likewise.
sim/frv/:
* config.in: Regenerate.
* configure: Likewise.
sim/:
* avr/config.in: Regenerate.
* avr/configure: Likewise.
* configure: Likewise.
* cris/config.in: Likewise.
* cris/configure: Likewise.
sim/h8300/:
* config.in: Regenerate.
* configure: Likewise.
sim/mn10300/:
* config.in: Regenerate.
* configure: Likewise.
sim/ppc/:
* config.in: Regenerate.
* configure: Likewise.
sim/erc32/:
* config.in: Regenerate.
* configure: Likewise.
sim/arm/:
* config.in: Regenerate.
* configure: Likewise.
sim/m68hc11/:
* config.in: Regenerate.
* configure: Likewise.
sim/lm32/:
* config.in: Regenerate.
* configure: Likewise.
sim/sh64/:
* config.in: Regenerate.
* configure: Likewise.
sim/v850/:
* config.in: Regenerate.
* configure: Likewise.
sim/cr16/:
* config.in: Regenerate.
* configure: Likewise.
sim/moxie/:
* config.in: Regenerate.
* configure: Likewise.
sim/m32c/:
* config.in: Regenerate.
* configure: Likewise.
sim/mips/:
* config.in: Regenerate.
* configure: Likewise.
sim/mcore/:
* config.in: Regenerate.
* configure: Likewise.
sim/testsuite/d10v-elf/:
* configure: Regenerate.
sim/testsuite/:
* configure: Regenerate.
sim/testsuite/frv-elf/:
* configure: Regenerate.
sim/testsuite/m32r-elf/:
* configure: Regenerate.
sim/testsuite/mips64el-elf/:
* configure: Regenerate.
sim/sh/:
* config.in: Regenerate.
* configure: Likewise.
gold/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* testsuite/Makefile.in: Likewise.
gprof/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* configure: Likewise.
* gconfig.in: Likewise.
opcodes/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
gas/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* doc/Makefile.in: Likewise.
ld/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
gdb/:
* aclocal.m4: Regenerate.
* config.in: Likewise.
* configure: Likewise.
* gnulib/Makefile.in: Likewise.
gdb/doc/:
* configure: Regenerate.
gdb/gdbserver/:
* aclocal.m4: Regenerate.
* config.in: Likewise.
* configure: Likewise.
gdb/testsuite/:
* configure: Regenerate.
* gdb.hp/configure: Likewise.
* gdb.hp/gdb.aCC/configure: Likewise.
* gdb.hp/gdb.base-hp/configure: Likewise.
* gdb.hp/gdb.compat/configure: Likewise.
* gdb.hp/gdb.defects/configure: Likewise.
* gdb.hp/gdb.objdbg/configure: Likewise.
* gdb.stabs/configure: Likewise.
binutils/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
* doc/Makefile.in: Likewise.
bfd/:
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
bfd/doc/:
* Makefile.in: Regenerate.
readline/:
* configure: Regenerate.
readline/examples/rlfe/:
* configure: Regenerate.
|
|
Fix loading large elf64 binaries on 32bit hosts.
* configure.in: Call AC_SYS_LARGEFILE.
* config.in: Regenerate.
* configure: Regenerate.
binutils/
Fix loading large elf64 binaries on 32bit hosts.
* configure.in: Call AC_SYS_LARGEFILE.
* config.in: Regenerate.
* configure: Regenerate.
gas/
* configure.in: Call AC_SYS_LARGEFILE.
* config.in: Regenerate.
* configure: Regenerate.
gprof/
* configure.in: Call AC_SYS_LARGEFILE.
* gconfig.in: Regenerate.
* configure: Regenerate.
ld/
* configure.in: Call AC_SYS_LARGEFILE.
* config.in: Regenerate.
* configure: Regenerate.
libiberty/
* configure.in: Call AC_SYS_LARGEFILE.
* config.in: Regenerate.
* configure: Regenerate.
|
|
* configure.in: Invoke AC_USE_SYSTEM_EXTENSIONS.
|
|
* Makefile.am (BFD32_LIBS): Add compress.lo.
(BFD32_LIBS_CFILES): Add compress.c.
(BFD_H_FILES): Likewise.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* config.in: Add HAVE_ZLIB_H
* configure.in: Add test for libz and zlib.h
* configure: Regenerate.
* dwarf2.c (read_section): New function.
(read_indirect_string): Call new function read_section.
(read_abbrevs): Likewise.
(decode_line_info): Likewise.
(read_debug_ranges): Likewise.
(find_line): Call new function read_section when just one
.zdebug_info section is found, otherwise read and compress
multiple sections.
(_bfd_dwarf2_cleanup_debug_info): Free sec_info_ptr.
* elf.c (_bfd_elf_make_section_from_shdr): Add zdebug prefix.
(special_sections_z): New struct.
(special_sections): Refer to special_sections_z.
* elfxx-mips.c (_bfd_mips_elf_section_from_shdr): Recognize
sections named .zdebug_*.
(_bfd_mips_elf_fake_sections): Likewise.
* compress.c: New file.
(bfd_uncompress_section_contents): New function.
bfd/doc/
* Makefile.am (BFD_H_DEP): Add ../compress.c.
* Makefile.in: Regenerate.
binutils/
* config.in: Add HAVE_ZLIB_H
* configure.in: Add test for libz and zlib.h
* configure: Regenerate.
* dwarf.c (debug_displays): Add .zdebug_* strings.
* dwarf.h (struct dwarf_section): Add fields uncompressed_namd
and compressed_name.
* objdump.c (load_debug_section): Call
bfd_uncompress_section_contents when loading a compressed
section.
(dump_dwarf_section): Recognize compressed section name.
(mach_o_dwarf_sections): Rename as
mach_o_uncompressed_dwarf_sections.
(mach_o_compressed_dwarf_sections): New variable.
(generic_dwarf_section): Rename as
generic_uncompressed_dwarf_sections.
(generic_compressed_dwarf_sections): New variable.
(check_mach_o_dwarf): Save and restore
mach_o_compressed_dwarf_sections.
* readelf.c: Add #include for config.h and zlib.h
(process_section_headers): Recognize compressed section name.
(uncompress_section_contents): New function.
(load_debug_section): Call uncompress_section_contents when
loading a compressed section.
(display_debug_section): Recognize compressed section name.
binutils/testsuite:
* binutils-all/objdump.exp: Add test for objdump -s on a file
with a compressed debug section. Add test for objdump -W on a
file that contains a compressed debug section.
* binutils-all/readelf.exp: Call readelf_compressed_wa_test.
(readelf_compressed_wa_test): New function.
* binutils-all/dw2-compressed.S: New file.
* binutils-all/objdump.W: New file.
* binutils-all/objdump.s: New file.
* binutils-all/readelf.wa: New file.
|
|
|
|
* acinclude.m4: Added missing "lib-*.m4" and "lt*.m4" files.
* configure.in: Add AC_CHECK_HEADER for iconv.h and use AM_ICONV.
* config.in: Add ICONV defines.
* aclocal: Regenerate.
* confugure: Regenerate.
* winduni.c: (local_iconv_map codepages, wind_language_t, languages, unicode_is$
(ascii_from_unicode): Use codepage_from_unicode.
(ascii_from_unicode): Use unicode_from_codepage.
Use for cygwin windows API for unicode transformation.
* winduni.h: (CP_ACP, CP_UTF7, CP_UTF8, CP_OEM, CP_UTF16): New macros.
(wind_language_t, local_iconv_map): New types.
(wind_find_language_by_id, wind_find_language_by_codepage,
(unicode_is_valid_codepage, wind_find_codepage_info, unicode_from_codepage, c$
|
|
PR binutils/3384
* configure.in (AC_CHECK_HEADERS): Add limits.h and sys/param.h.
* configure: Regenerated.
* config.in: Likewise.
* readelf.c: Include <limits.h> and <sys/param.h> for PATH_MAX.
(program_interpreter): Allocate PATH_MAX bytes instead of 64.
(process_program_headers): Don't assume that program interpreter
is shorter than 64 characters.
|
|
* configure.in: Check for the mkstemp and mkdtemp functions.
* configure: Regenerate.
* config.in (HAVE_MKDTEMP): New potential define.
(MAKE_MKSTEMP): Likewise.
* bucomm.c (make_tempname): Use mkstemp if it is available.
* make_tempdir): New function: Create a temporary directory using mkdtemp, if
it is available.
* bucomm.h (make_tempdir): New prototype.
* objcopy.c (copy_archive): Use make_tempdir if it is available.
(strip_main): Produce an warning message if a temporary file could not be
(copy_main): Likewise.
* ar.c (write_archive): Likewise.
|
|
|
|
* config.in: Rebuilt.
binutils/
* config.in: Rebuilt.
|
|
* bucomm.h (stpcpy): Declare if HAVE_DECL_STPCPY isn't defined.
* configure.in (AC_GNU_SOURCE): Added.
(AC_CHECK_DECLS): Add stpcpy.
* configure: Regenerated.
* config.in: Likewise.
|
|
(BFD_NEED_DECLARATION): Replace with AC_CHECK_DECLS.
* configure: Regenerate.
* config.in: Regenerate.
* objdump.c (NEED_DECLARATION_*): Replace with !HAVE_DECL_*.
* bucomm.h: (NEED_DECLARATION_*): Ditto.
|
|
* configure.in: Check for getc_unlocked prototype.
* configure: Regenerate.
* config.in: Regenerate.
* strings.c (get_char): Only call getc_unlocked if we have seen a
prototype.
|