aboutsummaryrefslogtreecommitdiff
path: root/bfd/libbfd.h
AgeCommit message (Collapse)AuthorFilesLines
2018-08-05R_PPC64_REL24_NOTOC supportAlan Modra1-0/+1
R_PPC64_REL24_NOTOC is used on calls like "bl foo@notoc" to tell the linker that linkage stubs for PLT calls or long branches can't use r2 for pic addressing. Instead, new stubs that generate pc-relative addresses are used. One complication is that pc-relative offsets to the PLT may need to be 64-bit in large programs, in contrast to the toc-relative addressing used by older PLT linkage stubs where a 32-bit offset is sufficient until the PLT itself exceeds 2G in size. .eh_frame info to cover the _notoc stubs is yet to be implemented. bfd/ * elf64-ppc.c (ADDI_R12_R11, ADDI_R12_R12, LIS_R12), (ADDIS_R12_R11, ORIS_R12_R12_0, ORI_R12_R12_0), (SLDI_R12_R12_32, LDX_R12_R11_R12, ADD_R12_R11_R12): Define. (ppc64_elf_howto_raw): Add R_PPC64_REL24_NOTOC entry. (ppc64_elf_reloc_type_lookup): Support R_PPC64_REL24_NOTOC. (ppc_stub_type): Add ppc_stub_long_branch_notoc, ppc_stub_long_branch_both, ppc_stub_plt_branch_notoc, ppc_stub_plt_branch_both, ppc_stub_plt_call_notoc, and ppc_stub_plt_call_both. (is_branch_reloc): Add R_PPC64_REL24_NOTOC. (build_offset, size_offset): New functions. (plt_stub_size): Support plt_call_notoc and plt_call_both. (ppc_build_one_stub, ppc_size_one_stub): Support new stubs. (toc_adjusting_stub_needed): Handle R_PPC64_REL24_NOTOC. (ppc64_elf_size_stubs): Likewise, and new stubs. (ppc64_elf_build_stubs, ppc64_elf_relocate_section): Likewise. * reloc.c: Add BFD_RELOC_PPC64_REL24_NOTOC. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.c (ppc_elf_suffix): Support @notoc. (ppc_force_relocation, ppc_fix_adjustable): Handle REL24_NOTOC. ld/ * testsuite/ld-powerpc/ext.d, * testsuite/ld-powerpc/ext.s, * testsuite/ld-powerpc/ext.lnk, * testsuite/ld-powerpc/notoc.d, * testsuite/ld-powerpc/notoc.s: New tests. * testsuite/ld-powerpc/powerpc.exp: Run them.
2018-07-30Add support for the C_SKY series of processors.Andrew Jenner1-0/+65
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc. This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about. bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY. (BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise. * Makefile.in: Regenerated. * archures.c (enum bfd_architecture): Add bfd_arch_csky and related bfd_mach defines. (bfd_csky_arch): Declare. (bfd_archures_list): Add C-SKY. * bfd-in.h (elf32_csky_build_stubs): Declare. (elf32_csky_size_stubs): Declare. (elf32_csky_next_input_section: Declare. (elf32_csky_setup_section_lists): Declare. * bfd-in2.h: Regenerated. * config.bfd: Add C-SKY. * configure.ac: Likewise. * configure: Regenerated. * cpu-csky.c: New file. * elf-bfd.h (enum elf_target_id): Add C-SKY. * elf32-csky.c: New file. * libbfd.h: Regenerated. * reloc.c: Add C-SKY relocations. * targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare. (_bfd_target_vector): Add C-SKY target vector entries. binutils* readelf.c: Include elf/csky.h. (guess_is_rela): Handle EM_CSKY. (dump_relocations): Likewise. (get_machine_name): Likewise. (is_32bit_abs_reloc): Likewise. include * dis-asm.h (csky_symbol_is_valid): Declare. * opcode/csky.h: New file. opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c. * Makefile.in: Regenerated. * configure.ac: Add C-SKY. * configure: Regenerated. * csky-dis.c: New file. * csky-opc.h: New file. * disassemble.c (ARCH_csky): Define. (disassembler, disassemble_init_for_target): Add case for ARCH_csky. * disassemble.h (print_insn_csky, csky_get_disassembler): Declare. gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY. (TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise. * Makefile.in: Regenerated. * config/tc-csky.c: New file. * config/tc-csky.h: New file. * config/te-csky_abiv1.h: New file. * config/te-csky_abiv1_linux.h: New file. * config/te-csky_abiv2.h: New file. * config/te-csky_abiv2_linux.h: New file. * configure.tgt: Add C-SKY. * doc/Makefile.am (CPU_DOCS): Add entry for C-SKY. * doc/Makefile.in: Regenerated. * doc/all.texi: Set CSKY feature. * doc/as.texi (Overview): Add C-SKY options. (Machine Dependencies): Likewise. * doc/c-csky.texi: New file. * testsuite/gas/csky/*: New test cases. ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations. (ecskyelf.c, ecskyelf_linux.c): New rules. * Makefile.in: Regenerated. * configure.tgt: Add C-SKY. * emulparams/cskyelf.sh: New file. * emulparams/cskyelf_linux.sh: New file. * emultempl/cskyelf.em: New file. * gen-doc.texi: Add C-SKY. * ld.texi: Likewise. (Options specific to C-SKY targets): New section. * testsuite/ld-csky/*: New tests.
2018-07-02Allow BFD to recognize macOS universal librariesTom Tromey1-0/+1
Bug #13157 is about a gdb regression, where previously it could handle universal libraries, but now cannot. gdb isn't working for me on macOS for other reasons, so I wrote this small test program to show the problem: #include <config.h> #include <stdio.h> #include <stdlib.h> #include <bfd.h> void die (const char *what) { fprintf (stderr, "die: %s\n", what); exit (1); } int main (int argc, char **argv) { bfd *file = bfd_openr (argv[1], NULL); if (file == NULL) die ("couldn't open"); if (!bfd_check_format (file, bfd_archive)) die ("not an archive"); printf ("yay\n"); bfd_close (file); return 0; } Then I built a simple universal binary. With git master BFD, I get: $ ./doit ./universal-exe die: not an archive Jeff Muizelaar tracked this down to the BFD change for PR binutils/21787. This patch changed bfd_generic_archive_p to sometimes reset the BFD's "format" field. However, simply changing bfd_generic_archive_p regressed the test case in that bug. Debugging PR binutils/21787 again, what I saw is that the mach-o universal binary support acts like a bfd_archive but does not provide a _close_and_cleanup function. However, if a BFD appears as an archive member, it must always remove its own entry from its parent's map. Otherwise, when the parent is destroyed, the already-destroyed child BFD will be referenced. mach-o does not use the usual archive member support, so simply using _bfd_archive_close_and_cleanup (as other targets do) will not work. This patch fixes the problem by introducing a new _bfd_unlink_from_archive_parent function, then arranging for it to be called in the mach-o case. Ok? bfd/ChangeLog 2018-07-02 Jeff Muizelaar <jrmuizel@gmail.com> Tom Tromey <tom@tromey.com> PR 13157 PR 21787 * mach-o.c (bfd_mach_o_fat_close_and_cleanup): New function. (bfd_mach_o_close_and_cleanup): Redefine. * archive.c (_bfd_unlink_from_archive_parent): New function, extracted from.. (_bfd_archive_close_and_cleanup): ..here. (bfd_generic_archive_p): Do not clear archive's format. * libbfd-in.h (_bfd_unlink_from_archive_parent): Declare. * libbfd.h: Regenerate.
2018-06-18Add support for the TLV relocation generated by LLVM for x86_64 MACH-O targets.Mephi1-0/+1
PR 23297 * mach-o-x86-64.c (x86_64_howto_table): Add entry for BFD_RELOC_MACH_O_X86_64_RELOC_TLV. (bfd_mach_o_x86_64_canonicalize_one_reloc): Handle the new reloc. (bfd_mach_o_x86_64_swap_reloc_out): Likewise. * reloc.c (BFD_RELOC_MACH_O_X86_64_TV): New entry. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate.
2018-06-01Make _bfd_error_handler available outside libbfdAlan Modra1-3/+0
Needed when building libopcodes.so. bfd/ * bfd.c (_bfd_error_handler): Arrange for this function to be declared in bfd-in2.h. * libbfd-in.h (_bfd_error_handler): Don't declare. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. opcodes/ * sysdep.h (_bfd_error_handler): Don't declare. * msp430-decode.opc: Include bfd.h. Don't include ansidecl.h here. * rl78-decode.opc: Likewise. * msp430-decode.c: Regenerate. * rl78-decode.c: Regenerate.
2018-05-21ld: Hide symbols defined by HIDDEN/PROVIDE_HIDDENH.J. Lu1-0/+2
There should be no difference in output for symbols defined by HIDDEN or PROVIDE_HIDDEN assignments whether they are explicitly marked as hidden or not. This patch adds a new BFD function, bfd_link_hide_symbol, to hide symbols defined by HIDDEN and PROVIDE_HIDDEN assignments. bfd PR ld/23201 * aout-target.h (MY_bfd_link_hide_symbol): New. * aout-tic30.c (MY_bfd_link_hide_symbol): Likewise. * binary.c (binary_bfd_link_hide_symbol): Likewise. * coff-alpha.c (_bfd_ecoff_bfd_link_hide_symbol): Likewise. * coff-mips.c (_bfd_ecoff_bfd_link_hide_symbol): Likewise. * coff-rs6000.c (_bfd_xcoff_bfd_link_hide_symbol): Likewise. * coffcode.h (coff_bfd_link_hide_symbol): Likewise. * elf-bfd.h (_bfd_elf_link_hide_symbol): Likewise. * elfxx-target.h (bfd_elfNN_bfd_link_hide_symbol): Likewise. * i386msdos.c (msdos_bfd_link_hide_symbol): Likewise. * ihex.c (ihex_bfd_link_hide_symbol): Likewise. * libbfd-in.h (_bfd_nolink_bfd_link_hide_symbol): Likewise. * linker.c (_bfd_generic_link_hide_symbol): Likewise. (bfd_link_hide_symbol): Likewise. * mach-o-target.c (bfd_mach_o_bfd_link_hide_symbol): Likewise. * mmo.c (mmo_bfd_link_hide_symbol): Likewise. * pef.c (bfd_pef_bfd_link_hide_symbol): Likewise. * plugin.c (bfd_plugin_bfd_link_hide_symbol): Likewise. * ppcboot.c (ppcboot_bfd_link_hide_symbol): Likewise. * som.c (som_bfd_link_hide_symbol): Likewise. * srec.c (srec_bfd_link_hide_symbol): Likewise. * tekhex.c (tekhex_bfd_link_hide_symbol): Likewise. * vms-alpha.c (vms_bfd_link_hide_symbol): Likewise. (alpha_vms_bfd_link_hide_symbol): Likewise. * xsym.c (bfd_sym_bfd_link_hide_symbol): Likewise. * coff64-rs6000.c (rs6000_xcoff64_vec): Add _bfd_generic_link_hide_symbol. (rs6000_xcoff64_aix_vec): Likewise. * elflink.c (bfd_elf_record_link_assignment): Don't make forced local symbol dynamic. (_bfd_elf_link_hide_symbol): New function. * elfxx-x86.c (_bfd_x86_elf_link_symbol_references_local): Don't check root.ldscript_def. * targets.c (bfd_target): Add _bfd_link_hide_symbol. (BFD_JUMP_TABLE_LINK): Add NAME##_bfd_link_hide_symbol. * bfd-in2.h: Regenerated. * libbfd.h: Likewise. ld/ PR ld/23201 * ldexp.c (exp_fold_tree_1): Call bfd_link_hide_symbol to hide a symbol. * testsuite/ld-elf/provide-hidden-dynabs.nd: Removed. * testsuite/ld-elf/provide-hidden-dynsec.nd: Likewise. * testsuite/ld-elf/provide-hidden.exp: Replace provide-hidden-dynsec.nd with provide-hidden-sec.nd and provide-hidden-dyn.nd. Replace provide-hidden-dynabs.nd with provide-hidden-abs.nd and provide-hidden-dyn.nd. * testsuite/ld-i386/pr23189.d: Expect no dynamic relocation. * testsuite/ld-x86-64/pr23189.d: Likewise.
2018-05-18Add support for the Freescale s12z processor.John Darrington1-0/+1
bfd * Makefile.am: Add s12z files. * Makefile.in: Regenerate. * archures.c: Add bfd_s12z_arch. * bfd-in.h: Add exports of bfd_putb24 and bfd_putl24. * bfd-in2.h: Regenerate. * config.bfd: Add s12z target. * configure.ac: Add s12z target. * configure: Regenerate. * cpu-s12z.c: New file. * elf32-s12z.c: New file. * libbfd.c (bfd_putb24): New function. (bfd_putl24): New function. * libbfd.h: Regenerate. * reloc.c: Add s12z relocations. (bfd_get_reloc_size): Handle size 5 relocs. * targets.c: Add s12z_elf32_vec. opcodes * Makefile.am: Add support for s12z architecture. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * s12z-dis.c: New file. * s12z.h: New file. include * elf/s12z.h: New header. ld * Makefile.am: Add support for s12z architecture. * configure.tgt: Likewise. * Makefile.in: Regenerate. * emulparams/m9s12zelf.sh: New file. * scripttempl/elfm9s12z.sc: New file. * testsuite/ld-discard/static.d: Expect to fail for the s12z target. * testsuite/ld-elf/endsym.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/pr14926.d: Skip for the s12z target. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-s12z: New directory. * testsuite/ld-s12z/opr-linking.d: New file. * testsuite/ld-s12z/opr-linking.s: New file. * testsuite/ld-s12z/relative-linking.d: New file. * testsuite/ld-s12z/relative-linking.s: New file. * testsuite/ld-s12z/z12s.exp: New file. gas * Makefile.am: Add support for s12z target. * Makefile.in: Regenerate. * NEWS: Mention the new support. * config/tc-s12z.c: New file. * config/tc-s12z.h: New file. * configure.tgt: Add s12z support. * doc/Makefile.am: Likewise. * doc/Makefile.in: Regenerate. * doc/all.texi: Add s12z documentation. * doc/as.textinfo: Likewise. * doc/c-s12z.texi: New file. * testsuite/gas/s12z: New directory. * testsuite/gas/s12z/abs.d: New file. * testsuite/gas/s12z/abs.s: New file. * testsuite/gas/s12z/adc-imm.d: New file. * testsuite/gas/s12z/adc-imm.s: New file. * testsuite/gas/s12z/adc-opr.d: New file. * testsuite/gas/s12z/adc-opr.s: New file. * testsuite/gas/s12z/add-imm.d: New file. * testsuite/gas/s12z/add-imm.s: New file. * testsuite/gas/s12z/add-opr.d: New file. * testsuite/gas/s12z/add-opr.s: New file. * testsuite/gas/s12z/and-imm.d: New file. * testsuite/gas/s12z/and-imm.s: New file. * testsuite/gas/s12z/and-opr.d: New file. * testsuite/gas/s12z/and-opr.s: New file. * testsuite/gas/s12z/and-or-cc.d: New file. * testsuite/gas/s12z/and-or-cc.s: New file. * testsuite/gas/s12z/bfext-special.d: New file. * testsuite/gas/s12z/bfext-special.s: New file. * testsuite/gas/s12z/bfext.d: New file. * testsuite/gas/s12z/bfext.s: New file. * testsuite/gas/s12z/bit-manip.d: New file. * testsuite/gas/s12z/bit-manip.s: New file. * testsuite/gas/s12z/bit.d: New file. * testsuite/gas/s12z/bit.s: New file. * testsuite/gas/s12z/bra-expression-defined.d: New file. * testsuite/gas/s12z/bra-expression-defined.s: New file. * testsuite/gas/s12z/bra-expression-undef.d: New file. * testsuite/gas/s12z/bra-expression-undef.s: New file. * testsuite/gas/s12z/bra.d: New file. * testsuite/gas/s12z/bra.s: New file. * testsuite/gas/s12z/brclr-symbols.d: New file. * testsuite/gas/s12z/brclr-symbols.s: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file. * testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file. * testsuite/gas/s12z/clb.d: New file. * testsuite/gas/s12z/clb.s: New file. * testsuite/gas/s12z/clr-opr.d: New file. * testsuite/gas/s12z/clr-opr.s: New file. * testsuite/gas/s12z/clr.d: New file. * testsuite/gas/s12z/clr.s: New file. * testsuite/gas/s12z/cmp-imm.d: New file. * testsuite/gas/s12z/cmp-imm.s: New file. * testsuite/gas/s12z/cmp-opr-inc.d: New file. * testsuite/gas/s12z/cmp-opr-inc.s: New file. * testsuite/gas/s12z/cmp-opr-rdirect.d: New file. * testsuite/gas/s12z/cmp-opr-rdirect.s: New file. * testsuite/gas/s12z/cmp-opr-reg.d: New file. * testsuite/gas/s12z/cmp-opr-reg.s: New file. * testsuite/gas/s12z/cmp-opr-rindirect.d: New file. * testsuite/gas/s12z/cmp-opr-rindirect.s: New file. * testsuite/gas/s12z/cmp-opr-sxe4.d: New file. * testsuite/gas/s12z/cmp-opr-sxe4.s: New file. * testsuite/gas/s12z/cmp-opr-xys.d: New file. * testsuite/gas/s12z/cmp-opr-xys.s: New file. * testsuite/gas/s12z/cmp-s-imm.d: New file. * testsuite/gas/s12z/cmp-s-imm.s: New file. * testsuite/gas/s12z/cmp-s-opr.d: New file. * testsuite/gas/s12z/cmp-s-opr.s: New file. * testsuite/gas/s12z/cmp-xy.d: New file. * testsuite/gas/s12z/cmp-xy.s: New file. * testsuite/gas/s12z/com-opr.d: New file. * testsuite/gas/s12z/com-opr.s: New file. * testsuite/gas/s12z/complex-shifts.d: New file. * testsuite/gas/s12z/complex-shifts.s: New file. * testsuite/gas/s12z/db-tb-cc-opr.d: New file. * testsuite/gas/s12z/db-tb-cc-opr.s: New file. * testsuite/gas/s12z/db-tb-cc-reg.d: New file. * testsuite/gas/s12z/db-tb-cc-reg.s: New file. * testsuite/gas/s12z/dbCC.d: New file. * testsuite/gas/s12z/dbCC.s: New file. * testsuite/gas/s12z/dec-opr.d: New file. * testsuite/gas/s12z/dec-opr.s: New file. * testsuite/gas/s12z/dec.d: New file. * testsuite/gas/s12z/dec.s: New file. * testsuite/gas/s12z/div.d: New file. * testsuite/gas/s12z/div.s: New file. * testsuite/gas/s12z/eor.d: New file. * testsuite/gas/s12z/eor.s: New file. * testsuite/gas/s12z/exg.d: New file. * testsuite/gas/s12z/exg.s: New file. * testsuite/gas/s12z/ext24-ld-xy.d: New file. * testsuite/gas/s12z/ext24-ld-xy.s: New file. * testsuite/gas/s12z/inc-opr.d: New file. * testsuite/gas/s12z/inc-opr.s: New file. * testsuite/gas/s12z/inc.d: New file. * testsuite/gas/s12z/inc.s: New file. * testsuite/gas/s12z/inh.d: New file. * testsuite/gas/s12z/inh.s: New file. * testsuite/gas/s12z/jmp.d: New file. * testsuite/gas/s12z/jmp.s: New file. * testsuite/gas/s12z/jsr.d: New file. * testsuite/gas/s12z/jsr.s: New file. * testsuite/gas/s12z/ld-imm-page2.d: New file. * testsuite/gas/s12z/ld-imm-page2.s: New file. * testsuite/gas/s12z/ld-imm.d: New file. * testsuite/gas/s12z/ld-imm.s: New file. * testsuite/gas/s12z/ld-immu18.d: New file. * testsuite/gas/s12z/ld-immu18.s: New file. * testsuite/gas/s12z/ld-large-direct.d: New file. * testsuite/gas/s12z/ld-large-direct.s: New file. * testsuite/gas/s12z/ld-opr.d: New file. * testsuite/gas/s12z/ld-opr.s: New file. * testsuite/gas/s12z/ld-s-opr.d: New file. * testsuite/gas/s12z/ld-s-opr.s: New file. * testsuite/gas/s12z/ld-small-direct.d: New file. * testsuite/gas/s12z/ld-small-direct.s: New file. * testsuite/gas/s12z/lea-immu18.d: New file. * testsuite/gas/s12z/lea-immu18.s: New file. * testsuite/gas/s12z/lea.d: New file. * testsuite/gas/s12z/lea.s: New file. * testsuite/gas/s12z/mac.d: New file. * testsuite/gas/s12z/mac.s: New file. * testsuite/gas/s12z/min-max.d: New file. * testsuite/gas/s12z/min-max.s: New file. * testsuite/gas/s12z/mod.d: New file. * testsuite/gas/s12z/mod.s: New file. * testsuite/gas/s12z/mov.d: New file. * testsuite/gas/s12z/mov.s: New file. * testsuite/gas/s12z/mul-imm.d: New file. * testsuite/gas/s12z/mul-imm.s: New file. * testsuite/gas/s12z/mul-opr-opr.d: New file. * testsuite/gas/s12z/mul-opr-opr.s: New file. * testsuite/gas/s12z/mul-opr.d: New file. * testsuite/gas/s12z/mul-opr.s: New file. * testsuite/gas/s12z/mul-reg.d: New file. * testsuite/gas/s12z/mul-reg.s: New file. * testsuite/gas/s12z/mul.d: New file. * testsuite/gas/s12z/mul.s: New file. * testsuite/gas/s12z/neg-opr.d: New file. * testsuite/gas/s12z/neg-opr.s: New file. * testsuite/gas/s12z/not-so-simple-shifts.d: New file. * testsuite/gas/s12z/not-so-simple-shifts.s: New file. * testsuite/gas/s12z/opr-18u.d: New file. * testsuite/gas/s12z/opr-18u.s: New file. * testsuite/gas/s12z/opr-expr.d: New file. * testsuite/gas/s12z/opr-expr.s: New file. * testsuite/gas/s12z/opr-ext-18.d: New file. * testsuite/gas/s12z/opr-ext-18.s: New file. * testsuite/gas/s12z/opr-idx-24-reg.d: New file. * testsuite/gas/s12z/opr-idx-24-reg.s: New file. * testsuite/gas/s12z/opr-idx3-reg.d: New file. * testsuite/gas/s12z/opr-idx3-reg.s: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.d: New file. * testsuite/gas/s12z/opr-idx3-xysp-24.s: New file. * testsuite/gas/s12z/opr-indirect-expr.d: New file. * testsuite/gas/s12z/opr-indirect-expr.s: New file. * testsuite/gas/s12z/opr-symbol.d: New file. * testsuite/gas/s12z/opr-symbol.s: New file. * testsuite/gas/s12z/or-imm.d: New file. * testsuite/gas/s12z/or-imm.s: New file. * testsuite/gas/s12z/or-opr.d: New file. * testsuite/gas/s12z/or-opr.s: New file. * testsuite/gas/s12z/p2-mul.d: New file. * testsuite/gas/s12z/p2-mul.s: New file. * testsuite/gas/s12z/page2-inh.d: New file. * testsuite/gas/s12z/page2-inh.s: New file. * testsuite/gas/s12z/psh-pul.d: New file. * testsuite/gas/s12z/psh-pul.s: New file. * testsuite/gas/s12z/qmul.d: New file. * testsuite/gas/s12z/qmul.s: New file. * testsuite/gas/s12z/rotate.d: New file. * testsuite/gas/s12z/rotate.s: New file. * testsuite/gas/s12z/s12z.exp: New file. * testsuite/gas/s12z/sat.d: New file. * testsuite/gas/s12z/sat.s: New file. * testsuite/gas/s12z/sbc-imm.d: New file. * testsuite/gas/s12z/sbc-imm.s: New file. * testsuite/gas/s12z/sbc-opr.d: New file. * testsuite/gas/s12z/sbc-opr.s: New file. * testsuite/gas/s12z/shift.d: New file. * testsuite/gas/s12z/shift.s: New file. * testsuite/gas/s12z/simple-shift.d: New file. * testsuite/gas/s12z/simple-shift.s: New file. * testsuite/gas/s12z/single-ops.d: New file. * testsuite/gas/s12z/single-ops.s: New file. * testsuite/gas/s12z/specd6.d: New file. * testsuite/gas/s12z/specd6.s: New file. * testsuite/gas/s12z/st-large-direct.d: New file. * testsuite/gas/s12z/st-large-direct.s: New file. * testsuite/gas/s12z/st-opr.d: New file. * testsuite/gas/s12z/st-opr.s: New file. * testsuite/gas/s12z/st-s-opr.d: New file. * testsuite/gas/s12z/st-s-opr.s: New file. * testsuite/gas/s12z/st-small-direct.d: New file. * testsuite/gas/s12z/st-small-direct.s: New file. * testsuite/gas/s12z/st-xy.d: New file. * testsuite/gas/s12z/st-xy.s: New file. * testsuite/gas/s12z/sub-imm.d: New file. * testsuite/gas/s12z/sub-imm.s: New file. * testsuite/gas/s12z/sub-opr.d: New file. * testsuite/gas/s12z/sub-opr.s: New file. * testsuite/gas/s12z/tfr.d: New file. * testsuite/gas/s12z/tfr.s: New file. * testsuite/gas/s12z/trap.d: New file. * testsuite/gas/s12z/trap.s: New file. binutils* readelf.c: Add support for s12z architecture. * testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z targets.
2018-05-18ATTRIBUTE_HIDDEN for libbfd.hAlan Modra1-225/+266
* libbfd-in.h (ATTRIBUTE_HIDDEN): Define and use throughout. * configure.ac (HAVE_HIDDEN): Check compiler support for hidden visibility. * libbfd.h: Regenerate. * configure: Regenerate. * config.in: Regenerate.
2018-05-18libbfd.h and libcoff.h include guardsAlan Modra1-0/+4
* libbfd-in.h: Add include guard. * libcoff-in.h: Likewise. * doc/Makefile.am (libbfd.h, libcoff.h): Append another #endif. * doc/Makefile.in: Regenerate. * libbfd.h: Regenerate. * libcoff.h: Regenerate.
2018-05-16PR22458, failure to choose a matching ELF targetAlan Modra1-0/+3
https://sourceware.org/ml/binutils/2013-05/msg00271.html was supposed to banish "file format is ambiguous" errors for ELF. It didn't, because the code supposedly detecting formats that implement match_priority didn't work. That was due to not placing all matching targets into the vector of matching targets. ELF objects should all match the generic ELF target (priority 2), plus one or more machine specific targets (priority 1), and perhaps a single machine specific target with OS/ABI set (priority 0, best match). So the armel object in the testcase actually matches elf32-littlearm, elf32-littlearm-symbian, and elf32-littlearm-vxworks (all priority 1), and elf32-little (priority 2). As the PR reported, elf32-little wasn't seen as matching. Fixing that part of the problem wasn't too difficult but matching the generic ELF target as well as the ARM ELF targets resulted in ARM testsuite failures. These proved to be the annoying reordering of stubs that occurs from time to time due to the stub names containing the section id. Matching another target causes more sections to be created in elf_object_p. If section ids change, stub names change, which results in different hashing and can therefore result in different hash table traversal and stub creation order. That particular problem is fixed by resetting section_id to the initial state before attempting each target match, and taking a snapshot of its value after a successful match. PR 22458 * format.c (struct bfd_preserve): Add section_id. (bfd_preserve_save, bfd_preserve_restore): Save and restore _bfd_section_id. (bfd_reinit): Set _bfd_section_id. (bfd_check_format_matches): Put all matches of any priority into matching_vector. Save initial section id and start each attempted match at that section id. * libbfd-in.h (_bfd_section_id): Declare. * section.c (_bfd_section_id): Rename from section_id and make global. Adjust uses. (bfd_get_next_section_id): Delete. * elf64-ppc.c (ppc64_elf_setup_section_lists): Replace use of bfd_get_section_id with _bfd_section_id. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate.
2018-04-27Regenerate some files for recent ARM patchesAlan Modra1-0/+7
bfd/ * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. ld/ * po/BLD-POTFILES.in: Regenerate.
2018-04-17[MicroBlaze] PIC data text relativeMichael Eager1-0/+2
Andrew Sadek <andrew.sadek.se@gmail.com> A new implemented feature in GCC Microblaze that allows Position Independent Code to run using Data Text Relative addressing instead of using Global Offset Table. Its aim was to make 'PIC' more efficient and flexible as elf size excess performance overhead were noticed when using GOT due to the indirect addressing. include/ChangeLog: * bfdlink.h (Add flag): Add new flag @ 'bfd_link_info' struct. * elf/microblaze.h (Add 3 new relocations): R_MICROBLAZE_TEXTPCREL_64, R_MICROBLAZE_TEXTREL_64 and R_MICROBLAZE_TEXTREL_32_LO for relax function. bfd/ChangeLog: * bfd/reloc.c (2 new BFD relocations): BFD_RELOC_MICROBLAZE_64_TEXTPCREL & BFD_RELOC_MICROBLAZE_64_TEXTPCREL * bfd/bfd-in2.h: Regenerate * bfd/libbfd.h: Regenerate * bfd/elf32-microblaze.c (Handle new relocs): define 'HOWTO' of 3 new relocs and handle them in both relocate and relax functions. (microblaze_elf_reloc_type_lookup): add mapping between for new bfd relocs. (microblaze_elf_relocate_section): Handle new relocs in case of elf relocation. (microblaze_elf_relax_section): Handle new relocs for elf relaxation. gas/ChangeLog: * gas/config/tc-microblaze.c (Handle new relocs directives in assembler): Handle new relocs from compiler output. (imm_types): add new imm types for data text relative addressing TEXT_OFFSET, TEXT_PC_OFFSET (md_convert_frag): conversion for BFD_RELOC_MICROBLAZE_64_TEXTPCREL, BFD_RELOC_MICROBLAZE_64_TEXTPCREL (md_apply_fix): apply fix for BFD_RELOC_MICROBLAZE_64_TEXTPCREL, BFD_RELOC_MICROBLAZE_64_TEXTPCREL (md_estimate_size_before_relax): estimate size for BFD_RELOC_MICROBLAZE_64_TEXTPCREL, BFD_RELOC_MICROBLAZE_64_TEXTPCREL (tc_gen_reloc): generate relocations for BFD_RELOC_MICROBLAZE_64_TEXTPCREL, BFD_RELOC_MICROBLAZE_64_TEXTPCREL ld/ChangeLog: * ld/lexsup.c (Add 2 ld options): (ld_options): add disable-multiple-abs-defs @ 'ld_options' array (parse_args): parse new option and pass flag to 'link_info' struct. * ld/ldlex.h (Add enum): add new enum @ 'option_values' enum. * ld/ld.texinfo (Add new option): Add description for 'disable-multiple-abs-defs' * ld/main.c: Initialize flags with false @ 'main'. Handle disable-multiple-abs-defs @ 'mutiple_definition'.
2018-04-16Remove m68k-aout and m68k-coff supportAlan Modra1-2/+0
include/ * aout/host.h: Remove m68k-aout and m68k-coff support. * aout/hp300hpux.h: Delete. * coff/apollo.h: Delete. * coff/aux-coff.h: Delete. * coff/m68k.h: Delete. bfd/ * Makefile.am: Remove m68k-aout and m68k-coff support. * aoutf1.h: Likewise. * aoutx.h: Likewise. * archive.c: Likewise. * bfd-in.h: Likewise. * bfd.c: Likewise. * coffcode.h: Likewise. * coffswap.h: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * configure.host: Likewise. * doc/bfd.texinfo: Likewise. * doc/bfdint.texi: Likewise. * freebsd.h: Likewise. * gen-aout.c: Likewise. * hpux-core.c: Likewise. * libaout.h: Likewise. * libbfd-in.h: Likewise. * pdp11.c: Likewise. * peicode.h: Likewise. * riscix.c: Likewise. * targets.c: Likewise. * aout0.c: Delete. * coff-apollo.c: Delete. * coff-aux.c: Delete. * coff-m68k.c: Delete. * coff-svm68k.c: Delete. * coff-u68k.c: Delete. * hosts/delta68.h: Delete. * hosts/hp300bsd.h: Delete. * hosts/m68kaux.h: Delete. * hosts/news.h: Delete. * hp300bsd.c: Delete. * hp300hpux.c: Delete. * liboasys.h: Delete. * m68k4knetbsd.c: Delete. * m68klinux.c: Delete. * m68knetbsd.c: Delete. * oasys.c: Delete. * versados.c: Delete. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/copy-2.d: Remove m68k-aout and m68k-coff support. * testsuite/binutils-all/copy-3.d: Likewise. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * Makefile.am: Remove m68k-aout and m68k-coff support. * config/tc-m68k.c: Likewise. * config/tc-m68k.h: Likewise. * configure.ac: Likewise. * configure.tgt: Likewise. * testsuite/gas/all/weakref1u.d: Likewise. * testsuite/gas/m68k/all.exp: Likewise. * testsuite/gas/m68k/br-isaa.d: Likewise. * testsuite/gas/m68k/br-isab.d: Likewise. * testsuite/gas/m68k/br-isac.d: Likewise. * config/te-psos.h: Delete. * config/te-sun3.h: Delete. * testsuite/gas/m68k-coff/gas.exp: Delete. * testsuite/gas/m68k-coff/p2389.s: Delete. * testsuite/gas/m68k-coff/p2389a.s: Delete. * testsuite/gas/m68k-coff/p2430.s: Delete. * testsuite/gas/m68k-coff/p2430a.s: Delete. * testsuite/gas/m68k-coff/t1.s: Delete. * testsuite/gas/m68k/p3041.d: Delete. * testsuite/gas/m68k/p3041.s: Delete. * testsuite/gas/m68k/p3041data.d: Delete. * testsuite/gas/m68k/p3041data.s: Delete. * testsuite/gas/m68k/p3041pcrel.d: Delete. * testsuite/gas/m68k/p3041pcrel.s: Delete. * testsuite/gas/m68k/t2.d: Delete. * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am: Remove m68k-aout and m68k-coff support. * configure.tgt: Likewise. * emultempl/m68kelf.em: Likewise. * ld.texinfo: Likewise. * mri.c: Likewise. * emulparams/delta68.sh: Delete. * emulparams/hp300bsd.sh: Delete. * emulparams/hp3hpux.sh: Delete. * emulparams/m68k4knbsd.sh: Delete. * emulparams/m68kaout.sh: Delete. * emulparams/m68kaux.sh: Delete. * emulparams/m68kcoff.sh: Delete. * emulparams/m68klinux.sh: Delete. * emulparams/m68knbsd.sh: Delete. * emulparams/m68kpsos.sh: Delete. * emulparams/sun3.sh: Delete. * emultempl/m68kcoff.em: Delete. * scripttempl/delta68.sc: Delete. * scripttempl/m68kaux.sc: Delete. * scripttempl/m68kcoff.sc: Delete. * scripttempl/psos.sc: Delete. * testsuite/ld-versados/t1-1.ro: Delete. * testsuite/ld-versados/t1-2.ro: Delete. * testsuite/ld-versados/t1.ld: Delete. * testsuite/ld-versados/t1.ook: Delete. * testsuite/ld-versados/t2-1.ro: Delete. * testsuite/ld-versados/t2-2.ro: Delete. * testsuite/ld-versados/t2-3.ro: Delete. * testsuite/ld-versados/t2.ld: Delete. * testsuite/ld-versados/t2.ook: Delete. * testsuite/ld-versados/versados.exp: Delete. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-04-11Remove i860, i960, bout and aout-adobe targetsAlan Modra1-33/+0
Plus remove a few leftovers from the 29k support. include/ * aout/adobe.h: Delete. * aout/reloc.h: Delete. * coff/i860.h: Delete. * coff/i960.h: Delete. * elf/i860.h: Delete. * elf/i960.h: Delete. * opcode/i860.h: Delete. * opcode/i960.h: Delete. * aout/aout64.h (enum reloc_type): Trim off 29k and other unused values. * aout/ar.h (ARMAGB): Remove. * coff/internal.h (struct internal_aouthdr, struct internal_scnhdr, union internal_auxent): Remove i960 support. bfd/ * aout-adobe.c: Delete. * bout.c: Delete. * coff-i860.c: Delete. * coff-i960.c: Delete. * cpu-i860.c: Delete. * cpu-i960.c: Delete. * elf32-i860.c: Delete. * elf32-i960.c: Delete. * hosts/i860mach3.h: Delete. * Makefile.am: Remove i860, i960, bout, and adobe support. * archures.c: Remove i860 and i960 support. * coffcode.h: Likewise. * reloc.c: Likewise. * aoutx.h: Comment updates. * archive.c: Remove BOUT and i960 support. * bfd.c: Remove BOUT support. * coffswap.h: Remove i960 support. * config.bfd: Remove i860, i960 and adobe targets. * configure.ac: Remove adode, bout, i860, i960, icoff targets. * targets.c: Likewise. * ieee.c: Remove i960 support. * mach-o.c: Remove i860 support. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/SRC-POTFILES.in: Regenerate. opcodes/ * opcodes/i860-dis.c: Delete. * opcodes/i960-dis.c: Delete. * Makefile.am: Remove i860 and i960 support. * configure.ac: Likewise. * disassemble.c: Likewise. * disassemble.h: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. binutils/ * ieee.c: Remove i960 support. * od-macho.c: Remove i860 support. * readelf.c: Remove i860 and i960 support. * testsuite/binutils-all/objcopy.exp: Likewise. * testsuite/binutils-all/objdump.exp: Likewise. * testsuite/lib/binutils-common.exp: Likewise. gas/ * config/aout_gnu.h: Delete. * config/tc-i860.c: Delete. * config/tc-i860.h: Delete. * config/tc-i960.c: Delete. * config/tc-i960.h: Delete. * doc/c-i860.texi: Delete. * doc/c-i960.texi: Delete. * testsuite/gas/i860/README.i860: Delete. * testsuite/gas/i860/bitwise.d: Delete. * testsuite/gas/i860/bitwise.s: Delete. * testsuite/gas/i860/branch.d: Delete. * testsuite/gas/i860/branch.s: Delete. * testsuite/gas/i860/bte.d: Delete. * testsuite/gas/i860/bte.s: Delete. * testsuite/gas/i860/dir-align01.d: Delete. * testsuite/gas/i860/dir-align01.s: Delete. * testsuite/gas/i860/dir-intel01.d: Delete. * testsuite/gas/i860/dir-intel01.s: Delete. * testsuite/gas/i860/dir-intel02.d: Delete. * testsuite/gas/i860/dir-intel02.s: Delete. * testsuite/gas/i860/dir-intel03-err.l: Delete. * testsuite/gas/i860/dir-intel03-err.s: Delete. * testsuite/gas/i860/dual01.d: Delete. * testsuite/gas/i860/dual01.s: Delete. * testsuite/gas/i860/dual02-err.l: Delete. * testsuite/gas/i860/dual02-err.s: Delete. * testsuite/gas/i860/dual03.d: Delete. * testsuite/gas/i860/dual03.s: Delete. * testsuite/gas/i860/fldst01.d: Delete. * testsuite/gas/i860/fldst01.s: Delete. * testsuite/gas/i860/fldst02.d: Delete. * testsuite/gas/i860/fldst02.s: Delete. * testsuite/gas/i860/fldst03.d: Delete. * testsuite/gas/i860/fldst03.s: Delete. * testsuite/gas/i860/fldst04.d: Delete. * testsuite/gas/i860/fldst04.s: Delete. * testsuite/gas/i860/fldst05.d: Delete. * testsuite/gas/i860/fldst05.s: Delete. * testsuite/gas/i860/fldst06.d: Delete. * testsuite/gas/i860/fldst06.s: Delete. * testsuite/gas/i860/fldst07.d: Delete. * testsuite/gas/i860/fldst07.s: Delete. * testsuite/gas/i860/fldst08.d: Delete. * testsuite/gas/i860/fldst08.s: Delete. * testsuite/gas/i860/float01.d: Delete. * testsuite/gas/i860/float01.s: Delete. * testsuite/gas/i860/float02.d: Delete. * testsuite/gas/i860/float02.s: Delete. * testsuite/gas/i860/float03.d: Delete. * testsuite/gas/i860/float03.s: Delete. * testsuite/gas/i860/float04.d: Delete. * testsuite/gas/i860/float04.s: Delete. * testsuite/gas/i860/form.d: Delete. * testsuite/gas/i860/form.s: Delete. * testsuite/gas/i860/i860.exp: Delete. * testsuite/gas/i860/iarith.d: Delete. * testsuite/gas/i860/iarith.s: Delete. * testsuite/gas/i860/ldst01.d: Delete. * testsuite/gas/i860/ldst01.s: Delete. * testsuite/gas/i860/ldst02.d: Delete. * testsuite/gas/i860/ldst02.s: Delete. * testsuite/gas/i860/ldst03.d: Delete. * testsuite/gas/i860/ldst03.s: Delete. * testsuite/gas/i860/ldst04.d: Delete. * testsuite/gas/i860/ldst04.s: Delete. * testsuite/gas/i860/ldst05.d: Delete. * testsuite/gas/i860/ldst05.s: Delete. * testsuite/gas/i860/ldst06.d: Delete. * testsuite/gas/i860/ldst06.s: Delete. * testsuite/gas/i860/pfam.d: Delete. * testsuite/gas/i860/pfam.s: Delete. * testsuite/gas/i860/pfmam.d: Delete. * testsuite/gas/i860/pfmam.s: Delete. * testsuite/gas/i860/pfmsm.d: Delete. * testsuite/gas/i860/pfmsm.s: Delete. * testsuite/gas/i860/pfsm.d: Delete. * testsuite/gas/i860/pfsm.s: Delete. * testsuite/gas/i860/pseudo-ops01.d: Delete. * testsuite/gas/i860/pseudo-ops01.s: Delete. * testsuite/gas/i860/regress01.d: Delete. * testsuite/gas/i860/regress01.s: Delete. * testsuite/gas/i860/shift.d: Delete. * testsuite/gas/i860/shift.s: Delete. * testsuite/gas/i860/simd.d: Delete. * testsuite/gas/i860/simd.s: Delete. * testsuite/gas/i860/system.d: Delete. * testsuite/gas/i860/system.s: Delete. * testsuite/gas/i860/xp.d: Delete. * testsuite/gas/i860/xp.s: Delete. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * doc/Makefile.am: Likewise. * doc/all.texi: Likewise. * testsuite/gas/all/gas.exp * config/obj-coff.h: Remove i960 support. * doc/internals.texi: Likewise. * expr.c: Likewise. * read.c: Likewise. * write.c: Likewise. * write.h: Likewise. * testsuite/gas/lns/lns.exp: Likewise. * testsuite/gas/symver/symver.exp: Likewise. * config/tc-m68k.c: Remove BOUT support. * config/tc-score.c: Likewise. * config/tc-score7.c: Likewise. * config/tc-sparc.c: Likewise. * symbols.c: Likewise. * doc/h8.texi: Likewise. * configure.ac: Remove BOUT and i860 support. * doc/as.texinfo: Remove BOUT, i860 and i960 support * Makefile.in: Regenerate. * config.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * emulparams/coff_i860.sh: Delete. * emulparams/elf32_i860.sh: Delete. * emulparams/elf32_i960.sh: Delete. * emulparams/gld960.sh: Delete. * emulparams/gld960coff.sh: Delete. * emulparams/lnk960.sh: Delete. * emultempl/gld960.em: Delete. * emultempl/gld960c.em: Delete. * emultempl/lnk960.em: Delete. * scripttempl/i860coff.sc: Delete. * scripttempl/i960.sc: Delete. * ld.texinfo: Remove i960 support. * Makefile.am: Remove i860 and i960 support. * configure.tgt: Likewise. * testsuite/ld-discard/extern.d: Likewise. * testsuite/ld-discard/start.d: Likewise. * testsuite/ld-discard/static.d: Likewise. * testsuite/ld-elf/compressed1d.d: Likewise. * testsuite/ld-elf/group1.d: Likewise. * testsuite/ld-elf/group3b.d: Likewise. * testsuite/ld-elf/group8a.d: Likewise. * testsuite/ld-elf/group8b.d: Likewise. * testsuite/ld-elf/group9a.d: Likewise. * testsuite/ld-elf/group9b.d: Likewise. * testsuite/ld-elf/linkonce2.d: Likewise. * testsuite/ld-elf/merge.d: Likewise. * testsuite/ld-elf/merge2.d: Likewise. * testsuite/ld-elf/merge3.d: Likewise. * testsuite/ld-elf/orphan-10.d: Likewise. * testsuite/ld-elf/orphan-11.d: Likewise. * testsuite/ld-elf/orphan-12.d: Likewise. * testsuite/ld-elf/orphan-9.d: Likewise. * testsuite/ld-elf/orphan-region.d: Likewise. * testsuite/ld-elf/orphan.d: Likewise. * testsuite/ld-elf/orphan3.d: Likewise. * testsuite/ld-elf/pr12851.d: Likewise. * testsuite/ld-elf/pr12975.d: Likewise. * testsuite/ld-elf/pr13177.d: Likewise. * testsuite/ld-elf/pr13195.d: Likewise. * testsuite/ld-elf/pr17550a.d: Likewise. * testsuite/ld-elf/pr17550b.d: Likewise. * testsuite/ld-elf/pr17550c.d: Likewise. * testsuite/ld-elf/pr17550d.d: Likewise. * testsuite/ld-elf/pr17615.d: Likewise. * testsuite/ld-elf/pr20528a.d: Likewise. * testsuite/ld-elf/pr20528b.d: Likewise. * testsuite/ld-elf/pr21562a.d: Likewise. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/pr22677.d: Likewise. * testsuite/ld-elf/pr22836-1a.d: Likewise. * testsuite/ld-elf/pr22836-1b.d: Likewise. * testsuite/ld-elf/pr349.d: Likewise. * testsuite/ld-elf/sec-to-seg.exp: Likewise. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-elf/warn1.d: Likewise. * testsuite/ld-elf/warn2.d: Likewise. * testsuite/ld-elf/warn3.d: Likewise. * testsuite/lib/ld-lib.exp: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2018-03-28[1/2][GAS][AARCH64]Add BFD_RELOC_AARCH64_TLSLE_LDST8/16/32/64_TPREL_LO12 ↵Renlin Li1-0/+10
support in GAS. This patch adds the following relocation support into binutils gas. BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12, BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12_NC, BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12, BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12_NC, BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12, BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12_NC, BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12, BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12_NC. Those relocations includes both ip64 and ilp32 variant.
2018-02-19Add attribute printf to _bfd_error_handlerAlan Modra1-1/+1
and fix a few stray errors. * elf-attrs.c (_bfd_elf_parse_attributes): Correct _bfd_error_handler arguments. * elfxx-mips.c (_bfd_mips_elf_final_link): Likewise. * elfnn-riscv.c (_bfd_riscv_relax_align): Likewise. (_bfd_riscv_relax_pc): Likewise and fix typos. * libbfd-in.h (_bfd_error_handler): Add attribute printf. * libbfd.h: Regenerate.
2018-02-16Remove bfd stub function casts.Alan Modra1-153/+131
This patch defines a bunch of new functions to use in the BFD target structs rather than casting bfd_false or bfd_true and similar stub functions. I've also renamed the stub functions to reflect their parameters and put "error" in the name if they set bfd_error. The latter change is important since there were quite a few uses of bfd_false where setting bfd_error was inappropriate, for example in elf_backend_allow_non_load_phdr and is_target_special_symbol. * libbfd.c (_bfd_bool_bfd_false_error): Rename from bfd_false. (_bfd_bool_bfd_true): Rename from bfd_true. (_bfd_ptr_bfd_null_error): Rename from bfd_nullvoidptr. (_bfd_int_bfd_0): Rename from bfd_0. (_bfd_uint_bfd_0): Rename from bfd_0u. (_bfd_long_bfd_0): Rename from bfd_0l. (_bfd_long_bfd_n1_error): Rename from _bfd_n1. (_bfd_void_bfd): Rename from bfd_void. (_bfd_bool_bfd_false, _bfd_bool_bfd_asymbol_false), (_bfd_bool_bfd_link_false_error), (_bfd_bool_bfd_link_true, _bfd_bool_bfd_bfd_true), (_bfd_bool_bfd_uint_true, _bfd_bool_bfd_ptr_true), (_bfd_bool_bfd_asection_bfd_asection_true), (_bfd_bool_bfd_asymbol_bfd_asymbol_true), (_bfd_void_bfd_link, _bfd_void_bfd_asection): New functions. * archive.c (_bfd_noarchive_get_elt_at_index), (_bfd_noarchive_openr_next_archived_file), (_bfd_noarchive_construct_extended_name_table), (_bfd_noarchive_write_ar_hdr, _bfd_noarchive_truncate_arname), (_bfd_noarchive_write_armap): New functions. * archures.c (_bfd_nowrite_set_arch_mach): New function. * coff-alpha.c (alpha_ecoff_swap_coff_aux_in), (alpha_ecoff_swap_coff_sym_in, alpha_ecoff_swap_coff_lineno_in), (alpha_ecoff_swap_coff_aux_out, alpha_ecoff_swap_coff_sym_out), (alpha_ecoff_swap_coff_lineno_out), (alpha_ecoff_swap_coff_reloc_out): New functions. * coff-mips.c (mips_ecoff_swap_coff_aux_in), (mips_ecoff_swap_coff_sym_in, mips_ecoff_swap_coff_lineno_in), (mips_ecoff_swap_coff_aux_out, mips_ecoff_swap_coff_sym_out), (mips_ecoff_swap_coff_lineno_out), (mips_ecoff_swap_coff_reloc_out): New functions. * coffcode.h (coff_set_alignment_hook): Replace define with new function. (symname_in_debug_hook): Likewise. * ecoff.c (_bfd_ecoff_set_alignment_hook): New function. * elfxx-target.h (elf_backend_allow_non_load_phdr): Default to 0. * elf.c (assign_file_positions_except_relocs): Test elf_backend_allow_non_load_phdr for NULL. * elflink.c (_bfd_elf_omit_section_dynsym_default): Rename from _bfd_elf_link_omit_section_dynsym. Update uses. (_bfd_elf_omit_section_dynsym_all): New function. * elf-bfd.h (_bfd_elf_link_omit_section_dynsym): Delete. (_bfd_elf_omit_section_dynsym_default): Declare. (_bfd_elf_omit_section_dynsym_all): Declare. * linker.c (_bfd_nolink_sizeof_headers, _bfd_nolink_bfd_relax_section), (_bfd_nolink_bfd_get_relocated_section_contents), (_bfd_nolink_bfd_lookup_section_flags), (_bfd_nolink_bfd_is_group_section, _bfd_nolink_bfd_discard_group), (_bfd_nolink_bfd_link_hash_table_create), (_bfd_nolink_bfd_link_just_syms), (_bfd_nolink_bfd_copy_link_hash_symbol_type), (_bfd_nolink_bfd_link_split_section), (_bfd_nolink_section_already_linked), (_bfd_nolink_bfd_define_common_symbol), (_bfd_nolink_bfd_define_start_stop): New functions. * reloc.c (_bfd_norelocs_bfd_reloc_type_lookup), (_bfd_norelocs_bfd_reloc_name_lookup), (_bfd_nodynamic_canonicalize_dynamic_reloc): New functions. * section.c (_bfd_nowrite_set_section_contents): New function. * syms.c (_bfd_nosymbols_canonicalize_symtab), (_bfd_nosymbols_print_symbol, _bfd_nosymbols_get_symbol_info), (_bfd_nosymbols_get_symbol_version_string), (_bfd_nosymbols_bfd_is_local_label_name), (_bfd_nosymbols_get_lineno, _bfd_nosymbols_find_nearest_line), (_bfd_nosymbols_find_line, _bfd_nosymbols_find_inliner_info), (_bfd_nosymbols_bfd_make_debug_symbol), ( _bfd_nosymbols_read_minisymbols), ( _bfd_nosymbols_minisymbol_to_symbol), (_bfd_nodynamic_get_synthetic_symtab): New functions. * libbfd-in.h: Declare new functions. Update existing defines, removing casts. * aix386-core.c: Update to use new hooks. Formatting. * aout-adobe.c: Likewise. * aout-arm.c: Likewise. * aout-target.h: Likewise. * aout-tic30.c: Likewise. * aoutf1.h: Likewise. * binary.c: Likewise. * bout.c: Likewise. * cisco-core.c: Likewise. * coff-alpha.c: Likewise. * coff-i386.c: Likewise. * coff-i860.c: Likewise. * coff-i960.c: Likewise. * coff-ia64.c: Likewise. * coff-mips.c: Likewise. * coff-ppc.c: Likewise. * coff-rs6000.c: Likewise. * coff-sh.c: Likewise. * coff-tic30.c: Likewise. * coff-tic54x.c: Likewise. * coff-x86_64.c: Likewise. * coff64-rs6000.c: Likewise. * coffcode.h: Likewise. * elf-m10300.c: Likewise. * elf32-cr16.c: Likewise. * elf32-lm32.c: Likewise. * elf32-m32r.c: Likewise. * elf32-metag.c: Likewise. * elf32-score.c: Likewise. * elf32-score7.c: Likewise. * elf32-tilepro.c: Likewise. * elf32-xstormy16.c: Likewise. * elf32-xtensa.c: Likewise. * elf64-alpha.c: Likewise. * elf64-hppa.c: Likewise. * elf64-ia64-vms.c: Likewise. * elf64-mmix.c: Likewise. * elf64-sh64.c: Likewise. * elfnn-ia64.c: Likewise. * elfxx-sparc.c: Likewise. * elfxx-target.h: Likewise. * elfxx-tilegx.c: Likewise. * elfxx-x86.h: Likewise. * hp300hpux.c: Likewise. * hppabsd-core.c: Likewise. * hpux-core.c: Likewise. * i386msdos.c: Likewise. * i386os9k.c: Likewise. * ieee.c: Likewise. * ihex.c: Likewise. * irix-core.c: Likewise. * libaout.h: Likewise. * libecoff.h: Likewise. * mach-o-target.c: Likewise. * mach-o.c: Likewise. * mipsbsd.c: Likewise. * mmo.c: Likewise. * netbsd-core.c: Likewise. * nlm-target.h: Likewise. * oasys.c: Likewise. * osf-core.c: Likewise. * pdp11.c: Likewise. * pe-mips.c: Likewise. * pe-x86_64.c: Likewise. * pef.c: Likewise. * plugin.c: Likewise. * ppcboot.c: Likewise. * ptrace-core.c: Likewise. * sco5-core.c: Likewise. * som.c: Likewise. * sparclynx.c: Likewise. * srec.c: Likewise. * tekhex.c: Likewise. * trad-core.c: Likewise. * verilog.c: Likewise. * versados.c: Likewise. * vms-alpha.c: Likewise. * vms-lib.c: Likewise. * wasm-module.c: Likewise. * xsym.c: Likewise. * libbfd.h: Regenerate.
2018-02-14Fix compilation of the BFD sub-directory with a gcc v8 compiler by adding ↵Nick Clifton1-69/+66
extra casts. GCC v8 issues warnings about mis-matching casts of function pointers. A previous patch tried to fix this problem by adding new dummy functions which accepted a variable number of arguments. But this introduces serious problems when compiled with other versions of gcc, (notably gcc 4.4). This patch reverts that previous solution and instead adds extra casts (to function types without a parameter list). For more details see: https://sourceware.org/ml/binutils/2018-02/msg00198.html PR 22823 Revert previous delta. Add extra casts to avoid compile time warnings instead. * libbfd-in.h (_bfd_generic_bfd_copy_private_bfd_data): Add extra cast to avoid warning from gcc v8 compiler. (_bfd_generic_bfd_merge_private_bfd_data): Likewise. (_bfd_generic_bfd_set_private_flags): Likewise. (_bfd_generic_bfd_copy_private_section_data): Likewise. (_bfd_generic_bfd_copy_private_symbol_data): Likewise. (_bfd_generic_bfd_copy_private_header_data): Likewise. (_bfd_generic_bfd_print_private_bfd_data): Likewise. (_bfd_noarchive_construct_extended_name_table): Likewise. (_bfd_noarchive_truncate_arname): Likewise. (_bfd_noarchive_write_ar_hdr): Likewise. (_bfd_noarchive_get_elt_at_index): Likewise. (_bfd_nosymbols_canonicalize_symtab): Likewise. (_bfd_nosymbols_print_symbol): Likewise. (_bfd_nosymbols_get_symbol_info): Likewise. (_bfd_nosymbols_get_symbol_version_string): Likewise. (_bfd_nosymbols_bfd_is_local_label_name): Likewise. (_bfd_nosymbols_bfd_is_target_special_symbol): Likewise. (_bfd_nosymbols_get_lineno): Likewise. (_bfd_nosymbols_find_nearest_line): Likewise. (_bfd_nosymbols_find_line): Likewise. (_bfd_nosymbols_find_inliner_info): Likewise. (_bfd_nosymbols_bfd_make_debug_symbol): Likewise. (_bfd_nosymbols_read_minisymbols): Likewise. (_bfd_nosymbols_minisymbol_to_symbol): Likewise. (_bfd_norelocs_bfd_reloc_type_lookup): Likewise. (_bfd_norelocs_bfd_reloc_name_lookup): Likewise. (_bfd_nowrite_set_arch_mach): Likewise. (_bfd_nowrite_set_section_contents): Likewise. (_bfd_nolink_sizeof_headers): Likewise. (_bfd_nolink_bfd_get_relocated_section_contents): Likewise. (_bfd_nolink_bfd_relax_section): Likewise. (_bfd_nolink_bfd_gc_sections): Likewise. (_bfd_nolink_bfd_lookup_section_flags): Likewise. (_bfd_nolink_bfd_merge_sections): Likewise. (_bfd_nolink_bfd_is_group_section): Likewise. (_bfd_nolink_bfd_discard_group): Likewise. (_bfd_nolink_bfd_link_hash_table_create): Likewise. (_bfd_nolink_bfd_link_add_symbols): Likewise. (_bfd_nolink_bfd_link_just_syms): Likewise. (_bfd_nolink_bfd_copy_link_hash_symbol_type): Likewise. (_bfd_nolink_bfd_final_link): Likewise. (_bfd_nolink_bfd_link_split_section): Likewise. (_bfd_nolink_section_already_linked): Likewise. (_bfd_nolink_bfd_define_common_symbol): Likewise. (_bfd_nolink_bfd_define_start_stop): Likewise. (_bfd_nodynamic_canonicalize_dynamic_symtab): Likewise. (_bfd_nodynamic_get_synthetic_symtab): Likewise. (_bfd_nodynamic_get_dynamic_reloc_upper_bound _bfd_): Likewise. (_bfd_nodynamic_canonicalize_dynamic_reloc): Likewise. * libbfd.c (bfd_false_any): Delete. (bfd_true_any, bfd_nullvoidptr_any, bfd_0_any): Delete. (bfd_0u_any, bfd_0l_any, _bfd_n1_any, bfd_void_any): Delete. * libbfd.h (extern): Regenerate * aout-target.h (MY_bfd_is_target_special_symbol): Add extra cast to avoid warning from gcc v8 compiler. * aout-tic30.c (tic30_aout_set_arch_mach): Likewise. * binary.c (binary_get_symbol_info): Likewise. * coff-alpha.c (alpha_ecoff_backend_data): Likewise. * coff-mips.c (mips_ecoff_backend_data): Likewise. * coffcode.h (coff_set_alignment_hook): Likewise. (symname_in_debug_hook): Likewise. (bfd_coff_backend_data bigobj_swap_table): Likewise. * elf-m10300.c (elf_backend_omit_section_dynsym): Likewise. * elf32-cr16.c (elf_backend_omit_section_dynsym): Likewise. * elf32-lm32.c (elf_backend_omit_section_dynsym): Likewise. * elf32-m32r.c (elf_backend_omit_section_dynsym): Likewise. * elf32-metag.c (elf_backend_omit_section_dynsym): Likewise. * elf32-score.c (elf_backend_omit_section_dynsym): Likewise. * elf32-score7.c (elf_backend_omit_section_dynsym): Likewise. * elf32-xstormy16.c (elf_backend_omit_section_dynsym): Likewise. * elf32-xtensa.c (elf_backend_omit_section_dynsym): Likewise. * elf64-alpha.c (elf_backend_omit_section_dynsym): Likewise. * elf64-hppa.c (elf_backend_omit_section_dynsym): Likewise. * elf64-ia64-vms.c (elf_backend_omit_section_dynsym): Likewise. * elf64-mmix.c (elf_backend_omit_section_dynsym): Likewise. * elf64-sh64.c (elf_backend_omit_section_dynsym): Likewise. * elfnn-ia64.c (elf_backend_omit_section_dynsym): Likewise. * elfxx-target.h (bfd_elfNN_bfd_debug_info_accumulate): Likewise. (bfd_elfNN_bfd_make_debug_symbol): Likewise. (bfd_elfNN_bfd_merge_private_bfd_data): Likewise. (bfd_elfNN_bfd_set_private_flags): Likewise. (bfd_elfNN_bfd_is_target_special_symbol): Likewise. (elf_backend_init_index_section): Likewise. (elf_backend_allow_non_load_phdr): Likewise. * elfxx-x86.h (elf_backend_omit_section_dynsym): Likewise. * i386msdos.c (msdos_bfd_is_target_special_symbol): Likewise. * ieee.c (ieee_construct_extended_name_table): Likewise. (ieee_write_armap): Likewise. (ieee_write_ar_hdr): Likewise. (ieee_bfd_is_target_special_symbol): Likewise. * ihex.c (ihex_canonicalize_symtab): Likewise. (ihex_bfd_is_target_special_symbol): Likewise. * libaout.h (aout_32_bfd_is_target_special_symbol): Likewise. * libecoff.h (_bfd_ecoff_bfd_is_target_special_symbol): Likewise. (_bfd_ecoff_set_alignment_hook): Likewise. * mach-o-target.c (bfd_mach_o_bfd_is_target_special_symbol): Likewise. * mmo.c (mmo_bfd_is_target_special_symbol): Likewise. * nlm-target.h (nlm_bfd_is_target_special_symbol): Likewise. * oasys.c (oasys_construct_extended_name_table): Likewise. (oasys_write_armap): Likewise. (oasys_write_ar_hdr): Likewise. (oasys_bfd_is_target_special_symbol): Likewise. * pef.c (bfd_pef_bfd_is_target_special_symbol): Likewise. * plugin.c (bfd_plugin_bfd_is_target_special_symbol): Likewise. * ppcboot.c (ppcboot_bfd_is_target_special_symbol): Likewise. * som.c (som_bfd_is_target_special_symbol): Likewise. * srec.c (srec_bfd_is_target_special_symbol): Likewise. * tekhex.c (tekhex_bfd_is_target_special_symbol): Likewise. * verilog.c (verilog_bfd_is_target_special_symbol): Likewise. * versados.c (versados_bfd_is_target_special_symbol): Likewise. (versados_bfd_reloc_name_lookup): Likewise. * vms-alpha.c (vms_bfd_is_target_special_symbol): Likewise. (vms_bfd_define_start_stop): Likewise. (alpha_vms_bfd_is_target_special_symbol): Likewise. * wasm-module.c (wasm_bfd_is_target_special_symbol): Likewise. * xsym.c (bfd_sym_bfd_is_target_special_symbol): Likewise.
2018-02-13Fix compile time warning messages from gcc version 8 about cast between ↵Nick Clifton1-92/+106
incompatible function types. PR 22823 bfd Fix compile time warnings generated by gcc version 8. * libbfd-in.h: Remove extraneous text from prototypes. Add prototypes for bfd_false_any, bfd_true_any, bfd_nullvoidptr_any, bfd_0_any, bfd_0u_any, bfd_0l_any, bfd_n1_any, bfd_void_any. (_bfd_generic_bfd_copy_private_bfd_data): Use vararg based dummy function. (_bfd_generic_bfd_merge_private_bfd_data): Likewise. (_bfd_generic_bfd_set_private_flags): Likewise. (_bfd_generic_bfd_copy_private_section_data): Likewise. (_bfd_generic_bfd_copy_private_symbol_data): Likewise. (_bfd_generic_bfd_copy_private_header_data): Likewise. (_bfd_generic_bfd_print_private_bfd_data): Likewise. (_bfd_noarchive_construct_extended_name_table): Likewise. (_bfd_noarchive_truncate_arname): Likewise. (_bfd_noarchive_write_ar_hdr): Likewise. (_bfd_noarchive_get_elt_at_index): Likewise. (_bfd_nosymbols_canonicalize_symtab): Likewise. (_bfd_nosymbols_print_symbol): Likewise. (_bfd_nosymbols_get_symbol_info): Likewise. (_bfd_nosymbols_get_symbol_version_string): Likewise. (_bfd_nosymbols_bfd_is_local_label_name): Likewise. (_bfd_nosymbols_bfd_is_target_special_symbol): Likewise. (_bfd_nosymbols_get_lineno): Likewise. (_bfd_nosymbols_find_nearest_line): Likewise. (_bfd_nosymbols_find_line): Likewise. (_bfd_nosymbols_find_inliner_info): Likewise. (_bfd_nosymbols_bfd_make_debug_symbol): Likewise. (_bfd_nosymbols_read_minisymbols): Likewise. (_bfd_nosymbols_minisymbol_to_symbol): Likewise. (_bfd_norelocs_bfd_reloc_type_lookup): Likewise. (_bfd_norelocs_bfd_reloc_name_lookup): Likewise. (_bfd_nowrite_set_arch_mach): Likewise. (_bfd_nowrite_set_section_contents): Likewise. (_bfd_nolink_sizeof_headers): Likewise. (_bfd_nolink_bfd_get_relocated_section_contents): Likewise. (_bfd_nolink_bfd_relax_section): Likewise. (_bfd_nolink_bfd_gc_sections): Likewise. (_bfd_nolink_bfd_lookup_section_flags): Likewise. (_bfd_nolink_bfd_merge_sections): Likewise. (_bfd_nolink_bfd_is_group_section): Likewise. (_bfd_nolink_bfd_discard_group): Likewise. (_bfd_nolink_bfd_link_hash_table_create): Likewise. (_bfd_nolink_bfd_link_add_symbols): Likewise. (_bfd_nolink_bfd_link_just_syms): Likewise. (_bfd_nolink_bfd_copy_link_hash_symbol_type): Likewise. (_bfd_nolink_bfd_final_link): Likewise. (_bfd_nolink_bfd_link_split_section): Likewise. (_bfd_nolink_section_already_linked): Likewise. (_bfd_nolink_bfd_define_common_symbol): Likewise. (_bfd_nolink_bfd_define_start_stop): Likewise. (_bfd_nodynamic_canonicalize_dynamic_symtab): Likewise. (_bfd_nodynamic_get_synthetic_symtab): Likewise. (_bfd_nodynamic_get_dynamic_reloc_upper_bound _bfd_): Likewise. (_bfd_nodynamic_canonicalize_dynamic_reloc): Likewise. * libbfd.c (bfd_false_any): New function. Like bfd_false but accepts one or more arguments. (bfd_true_any): Likewise. (bfd_nullvoidptr_any): Likewise. (bfd_0_any): Likewise. (bfd_0u_any): Likewise. (bfd_0l_any): Likewise. (_bfd_n1_any): Likewise. (bfd_void_any): Likewise. * libbfd.h (extern): Regenerate * aout-target.h (MY_bfd_is_target_special_symbol): Use vararg based dummy function. * aout-tic30.c (tic30_aout_set_arch_mach): Likewise. * binary.c (binary_get_symbol_info): Likewise. * coff-alpha.c (alpha_ecoff_backend_data): Likewise. * coff-mips.c (mips_ecoff_backend_data): Likewise. * coffcode.h (coff_set_alignment_hook): Likewise. (symname_in_debug_hook): Likewise. (bfd_coff_backend_data bigobj_swap_table): Likewise. * elf-m10300.c (elf_backend_omit_section_dynsym): Likewise. * elf32-cr16.c (elf_backend_omit_section_dynsym): Likewise. * elf32-lm32.c (elf_backend_omit_section_dynsym): Likewise. * elf32-m32r.c (elf_backend_omit_section_dynsym): Likewise. * elf32-metag.c (elf_backend_omit_section_dynsym): Likewise. * elf32-score.c (elf_backend_omit_section_dynsym): Likewise. * elf32-score7.c (elf_backend_omit_section_dynsym): Likewise. * elf32-xstormy16.c (elf_backend_omit_section_dynsym): Likewise. * elf32-xtensa.c (elf_backend_omit_section_dynsym): Likewise. * elf64-alpha.c (elf_backend_omit_section_dynsym): Likewise. * elf64-hppa.c (elf_backend_omit_section_dynsym): Likewise. * elf64-ia64-vms.c (elf_backend_omit_section_dynsym): Likewise. * elf64-mmix.c (elf_backend_omit_section_dynsym): Likewise. * elf64-sh64.c (elf_backend_omit_section_dynsym): Likewise. * elfnn-ia64.c (elf_backend_omit_section_dynsym): Likewise. * elfxx-target.h (bfd_elfNN_bfd_debug_info_accumulate): Likewise. (bfd_elfNN_bfd_make_debug_symbol): Likewise. (bfd_elfNN_bfd_merge_private_bfd_data): Likewise. (bfd_elfNN_bfd_set_private_flags): Likewise. (bfd_elfNN_bfd_is_target_special_symbol): Likewise. (elf_backend_init_index_section): Likewise. (elf_backend_allow_non_load_phdr): Likewise. * elfxx-x86.h (elf_backend_omit_section_dynsym): Likewise. * i386msdos.c (msdos_bfd_is_target_special_symbol): Likewise. * ieee.c (ieee_construct_extended_name_table): Likewise. (ieee_write_armap): Likewise. (ieee_write_ar_hdr): Likewise. (ieee_bfd_is_target_special_symbol): Likewise. * ihex.c (ihex_canonicalize_symtab): Likewise. (ihex_bfd_is_target_special_symbol): Likewise. * libaout.h (aout_32_bfd_is_target_special_symbol): Likewise. * libecoff.h (_bfd_ecoff_bfd_is_target_special_symbol): Likewise. (_bfd_ecoff_set_alignment_hook): Likewise. * mach-o-target.c (bfd_mach_o_bfd_is_target_special_symbol): Likewise. * mmo.c (mmo_bfd_is_target_special_symbol): Likewise. * nlm-target.h (nlm_bfd_is_target_special_symbol): Likewise. * oasys.c (oasys_construct_extended_name_table): Likewise. (oasys_write_armap): Likewise. (oasys_write_ar_hdr): Likewise. (oasys_bfd_is_target_special_symbol): Likewise. * pef.c (bfd_pef_bfd_is_target_special_symbol): Likewise. * plugin.c (bfd_plugin_bfd_is_target_special_symbol): Likewise. * ppcboot.c (ppcboot_bfd_is_target_special_symbol): Likewise. * som.c (som_bfd_is_target_special_symbol): Likewise. * srec.c (srec_bfd_is_target_special_symbol): Likewise. * tekhex.c (tekhex_bfd_is_target_special_symbol): Likewise. * verilog.c (verilog_bfd_is_target_special_symbol): Likewise. * versados.c (versados_bfd_is_target_special_symbol): Likewise. (versados_bfd_reloc_name_lookup): Likewise. * vms-alpha.c (vms_bfd_is_target_special_symbol): Likewise. (vms_bfd_define_start_stop): Likewise. (alpha_vms_bfd_is_target_special_symbol): Likewise. * wasm-module.c (wasm_bfd_is_target_special_symbol): Likewise. * xsym.c (bfd_sym_bfd_is_target_special_symbol): Likewise. * elf32-arc.c (get_replace_function): Assign replacement function to func pointer. * elf32-i370.c (i370_noop): Update prototype. gas * config/obj-elf.c (elf_pseudo_table): Remove now redundant casts. (obj_elf_vtable_inherit): Rename to obj_elf_get_vtable_inherit. (obj_elf_vtable_inherit): New stub function that calls obj_elf_get_vtable_inherit. (obj_elf_vtable_entry): Rename to obj_elf_get_vtable_entry. (obj_elf_vtable_entry): New stub function that calls obj_elf_get_vtable_entry. * config/obj-elf.h (obj_elf_vtable_inherit): Update prototype. (obj_elf_vtable_entry) Likewise. (obj_elf_get_vtable_inherit) Likewise. (obj_elf_get_vtable_entry) Likewise. * config/tc-arm.c (md_pseudo_table): Remove now redundant cast. * config/tc-i386c (md_pseudo_table): Likewise. * config/tc-hppa.c (pa_vtable_entry): Call obj_elf_get_vtable_entry. (pa_vtable_inherit): Call obj_elf_get_vtable_inherit. * config/tc-mips.c (s_mips_file): Replace call to dwarf2_get_file with call to dwarf2_get_filename. * dwarf2dbg.c (dwarf2_directive_file): Rename to dwarf2_directive_filename. (dwarf2_directive_file): New stub function that calls dwarf2_directive_filename. * dwarf2dbg.h: Prototype dwarf2_directive_filename. opcodes * metag-dis.c (print_fmmov): Double buffer size to avoid warning about truncation of printing.
2018-01-24[GAS][AARCH64]Add group relocations to create PC-relative offset.Renlin Li1-0/+7
This is a patch to add the gas support for group relocations to create a 16, 32, 48, or 64 bit PC-relative offset inline. The following relocations are added along with the test cases: BFD_RELOC_AARCH64_MOVW_PREL_G0, BFD_RELOC_AARCH64_MOVW_PREL_G0_NC, BFD_RELOC_AARCH64_MOVW_PREL_G1, BFD_RELOC_AARCH64_MOVW_PREL_G1_NC, BFD_RELOC_AARCH64_MOVW_PREL_G2, BFD_RELOC_AARCH64_MOVW_PREL_G2_NC, BFD_RELOC_AARCH64_MOVW_PREL_G3. bfd/ 2018-01-24 Renlin Li <renlin.li@arm.com> * reloc.c: Add BFD_RELOC_AARCH64_MOVW_PREL_G0, BFD_RELOC_AARCH64_MOVW_PREL_G0_NC, BFD_RELOC_AARCH64_MOVW_PREL_G1, BFD_RELOC_AARCH64_MOVW_PREL_G1_NC, BFD_RELOC_AARCH64_MOVW_PREL_G2, BFD_RELOC_AARCH64_MOVW_PREL_G2_NC, BFD_RELOC_AARCH64_MOVW_PREL_G3. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elfnn-aarch64.c (elfNN_aarch64_howto_table): Add entries for BFD_RELOC_AARCH64_MOVW_PREL_G0, BFD_RELOC_AARCH64_MOVW_PREL_G0_NC, BFD_RELOC_AARCH64_MOVW_PREL_G1, BFD_RELOC_AARCH64_MOVW_PREL_G1_NC, BFD_RELOC_AARCH64_MOVW_PREL_G2, BFD_RELOC_AARCH64_MOVW_PREL_G2_NC, BFD_RELOC_AARCH64_MOVW_PREL_G3. gas/ 2018-01-24 Renlin Li <renlin.li@arm.com> * config/tc-aarch64.c (reloc_table): add entries for BFD_RELOC_AARCH64_MOVW_PREL_G0, BFD_RELOC_AARCH64_MOVW_PREL_G0_NC, BFD_RELOC_AARCH64_MOVW_PREL_G1, BFD_RELOC_AARCH64_MOVW_PREL_G1_NC, BFD_RELOC_AARCH64_MOVW_PREL_G2, BFD_RELOC_AARCH64_MOVW_PREL_G2_NC, BFD_RELOC_AARCH64_MOVW_PREL_G3. (process_movw_reloc_info): Supports newly added MOVW_PREL relocations. (md_apply_fix): Likewise * testsuite/gas/aarch64/prel_g0.s: New. * testsuite/gas/aarch64/prel_g0.d: New. * testsuite/gas/aarch64/prel_g0_nc.s: New. * testsuite/gas/aarch64/prel_g0_nc.d: New. * testsuite/gas/aarch64/prel_g1.s: New. * testsuite/gas/aarch64/prel_g1.d: New. * testsuite/gas/aarch64/prel_g1_nc.s: New. * testsuite/gas/aarch64/prel_g1_nc.d: New. * testsuite/gas/aarch64/prel_g2.s: New. * testsuite/gas/aarch64/prel_g2.d: New. * testsuite/gas/aarch64/prel_g2_nc.s: New. * testsuite/gas/aarch64/prel_g2_nc.d: New. * testsuite/gas/aarch64/prel_g3.s: New. * testsuite/gas/aarch64/prel_g3.d: New.
2018-01-03Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2017-12-06BFD whitespace fixesAlan Modra1-7/+7
Binutils is supposed to use tabs. In my git config I have whitespace = indent-with-non-tab,space-before-tab,trailing-space and I got annoyed enough seeing red in "git diff" output to fix the problems. * doc/header.sed: Trim trailing space when splitting lines. * aix386-core.c, * aout-adobe.c, * aout-arm.c, * aout-cris.c, * aout-ns32k.c, * aout-target.h, * aout-tic30.c, * aoutf1.h, * aoutx.h, * arc-got.h, * arc-plt.def, * arc-plt.h, * archive.c, * archive64.c, * archures.c, * armnetbsd.c, * bfd-in.h, * bfd.c, * bfdio.c, * binary.c, * bout.c, * cache.c, * cisco-core.c, * coff-alpha.c, * coff-apollo.c, * coff-arm.c, * coff-h8300.c, * coff-i386.c, * coff-i860.c, * coff-i960.c, * coff-m68k.c, * coff-m88k.c, * coff-mcore.c, * coff-mips.c, * coff-ppc.c, * coff-rs6000.c, * coff-sh.c, * coff-stgo32.c, * coff-tic4x.c, * coff-tic54x.c, * coff-tic80.c, * coff-we32k.c, * coff-x86_64.c, * coff-z80.c, * coff-z8k.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * coffswap.h, * compress.c, * corefile.c, * cpu-alpha.c, * cpu-arm.c, * cpu-avr.c, * cpu-bfin.c, * cpu-cr16.c, * cpu-cr16c.c, * cpu-crx.c, * cpu-d10v.c, * cpu-frv.c, * cpu-ft32.c, * cpu-i370.c, * cpu-i960.c, * cpu-ia64-opc.c, * cpu-ip2k.c, * cpu-lm32.c, * cpu-m32r.c, * cpu-mcore.c, * cpu-microblaze.c, * cpu-mips.c, * cpu-moxie.c, * cpu-mt.c, * cpu-nios2.c, * cpu-ns32k.c, * cpu-or1k.c, * cpu-powerpc.c, * cpu-pru.c, * cpu-sh.c, * cpu-spu.c, * cpu-v850.c, * cpu-v850_rh850.c, * cpu-xgate.c, * cpu-z80.c, * dwarf1.c, * dwarf2.c, * ecoff.c, * ecofflink.c, * ecoffswap.h, * elf-bfd.h, * elf-eh-frame.c, * elf-hppa.h, * elf-m10200.c, * elf-m10300.c, * elf-s390-common.c, * elf-strtab.c, * elf-vxworks.c, * elf.c, * elf32-am33lin.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-avr.h, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-d10v.c, * elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c, * elf32-i860.c, * elf32-i960.c, * elf32-ip2k.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c, * elf32-m68hc1x.c, * elf32-m68hc1x.h, * elf32-m68k.c, * elf32-m88k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nds32.h, * elf32-nios2.c, * elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c, * elf32-ppc.h, * elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-score.h, * elf32-score7.c, * elf32-sh-symbian.c, * elf32-sh.c, * elf32-sh64.c, * elf32-sparc.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilegx.c, * elf32-tilegx.h, * elf32-tilepro.c, * elf32-tilepro.h, * elf32-v850.c, * elf32-vax.c, * elf32-wasm32.c, * elf32-xc16x.c, * elf32-xgate.c, * elf32-xgate.h, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sh64.c, * elf64-sparc.c, * elf64-tilegx.c, * elf64-tilegx.h, * elf64-x86-64.c, * elfcore.h, * elflink.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-aarch64.c, * elfxx-aarch64.h, * elfxx-ia64.c, * elfxx-ia64.h, * elfxx-mips.c, * elfxx-riscv.c, * elfxx-sparc.c, * elfxx-tilegx.c, * elfxx-x86.c, * elfxx-x86.h, * freebsd.h, * hash.c, * host-aout.c, * hp300hpux.c, * hppabsd-core.c, * hpux-core.c, * i386aout.c, * i386linux.c, * i386lynx.c, * i386mach3.c, * i386msdos.c, * i386netbsd.c, * ieee.c, * ihex.c, * irix-core.c, * libaout.h, * libbfd-in.h, * libbfd.c, * libcoff-in.h, * libnlm.h, * libpei.h, * libxcoff.h, * linker.c, * lynx-core.c, * m68k4knetbsd.c, * m68klinux.c, * m68knetbsd.c, * m88kmach3.c, * mach-o-aarch64.c, * mach-o-arm.c, * mach-o-i386.c, * mach-o-target.c, * mach-o-x86-64.c, * mach-o.c, * mach-o.h, * merge.c, * mipsbsd.c, * mmo.c, * netbsd.h, * netbsd-core.c, * newsos3.c, * nlm-target.h, * nlm32-ppc.c, * nlm32-sparc.c, * nlmcode.h, * ns32k.h, * ns32knetbsd.c, * oasys.c, * opncls.c, * pc532-mach.c, * pdp11.c, * pe-arm.c, * pe-i386.c, * pe-mcore.c, * pe-mips.c, * pe-x86_64.c, * peXXigen.c, * pef.c, * pef.h, * pei-arm.c, * pei-i386.c, * pei-mcore.c, * pei-x86_64.c, * peicode.h, * plugin.c, * ppcboot.c, * ptrace-core.c, * reloc.c, * riscix.c, * rs6000-core.c, * section.c, * som.c, * som.h, * sparclinux.c, * sparcnetbsd.c, * srec.c, * stabs.c, * sunos.c, * syms.c, * targets.c, * tekhex.c, * trad-core.c, * vax1knetbsd.c, * vaxnetbsd.c, * verilog.c, * versados.c, * vms-alpha.c, * vms-lib.c, * vms-misc.c, * wasm-module.c, * wasm-module.h, * xcofflink.c, * xsym.c, * xsym.h: Whitespace fixes. * bfd-in2.h, * libbfd.h, * libcoff.h: Regenerate.
2017-11-01FT32B is a new FT32 family member. It has a code compression scheme, which ↵James Bowman1-0/+4
requires the use of linker relaxations. The change is quite large, so submission is in several parts. Part 2 adds a relaxation pass, which actually implements the code compression scheme. bfd * archures.c: Add bfd_mach_ft32b. * cpu-ft32.c: Add arch_info_struct. * elf32-ft32.c: Add R_FT32_RELAX, SC0, SC1, DIFF32. (ft32_elf_relocate_section): Add clauses for R_FT32_SC0, SC1, DIFF32. (ft32_reloc_shortable, elf32_ft32_is_diff_reloc, elf32_ft32_adjust_diff_reloc_value, elf32_ft32_adjust_reloc_if_spans_insn, elf32_ft32_relax_delete_bytes, elf32_ft32_relax_is_branch_target, ft32_elf_relax_section): New function. * reloc.c: Add BFD_RELOC_FT32_RELAX, SC0, SC1, DIFF32. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas * config/tc-ft32.c (md_assemble): add relaxation reloc BFD_RELOC_FT32_RELAX. (md_longopts): Add "norelax" and "no-relax". (md_apply_fix): Add reloc BFD_RELOC_FT32_DIFF32. (relaxable_section, ft32_validate_fix_sub, ft32_force_relocation, ft32_allow_local_subtract): New function. * config/tc-ft32.h: remove unused MD_PCREL_FROM_SECTION. * testsuite/gas/ft32/insnsc.s: New test exercising all FT32B shortcodes. include * elf/ft32.h: Add R_FT32_RELAX, SC0, SC1, DIFF32.
2017-10-12FT32: support for FT32B processor - part 1James Bowman1-0/+1
FT32B is a new FT32 family member. It has a code compression scheme, which requires the use of linker relaxations. The change is quite large, so submission is in several parts. Part 1 adds a 15-bit instruction field, and CPU-specific functions for the code compression that are used in binutils and GDB. bfd/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf32-ft32.c: Add HOWTO R_FT32_15. * reloc.c: Add BFD_RELOC_FT32_15. gas/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * config/tc-ft32.c (md_assemble): Replace FT32_FLD_K8 with K15. (md_apply_fix, tc_gen_reloc): Add BFD_RELOC_FT32_15. include/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * elf/ft32.h: Add R_FT32_15. * opcode/ft32.h: Replace FT32_FLD_K8 with K15. (ft32_shortcode, sc_compar, ft32_split_shortcode, ft32_merge_shortcode, ft32_merge_shortcode): New functions. opcodes/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * opcodes/ft32-dis.c (print_insn_ft32): Replace FT32_FLD_K8 with K15. * opcodes/ft32-opc.c (ft32_opc_info): Replace FT32_FLD_K8 with K15. Add jmpix pattern. sim/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * sim/ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
2017-07-24Improve "unrecognized relocation" error messages to add the suggestion that ↵Nick Clifton1-0/+5
the linker might be out of date. PR 21803 * reloc.c (_bfd_unrecognized_reloc): New function. Reports an unrecognized reloc and sets the bfd_error value. * libbfd.h: Regenerate. * elf32-arm.c (elf32_arm_final_link_relocate): Use the new function. * elf32-i386.c (elf_i386_relocate_section): Likewise. * elf32-tilepro.c (tilepro_elf_relocate_section): Likewise. * elf64-x86-64.c (elf_x86_64_relocate_section): Likewise. * elfnn-aarch64.c (elfNN_aarch64_relocate_section): Likewise. * elfxx-tilegx.c (tilegx_elf_relocate_section): Likewise.
2017-07-19[ARC] Add JLI support.John Eric Martin1-0/+1
The following relocation types were added to GCC/binutils: ARC_JLI_SECTOFF is a relocation type in Metaware that is now used by GCC as well to adjust the index of function calls to functions with attribute jli_call_always. bfd/ 2017-07-19 Claudiu Zissulescu <claziss@synopsys.com> John Eric Martin <John.Martin@emmicro-us.com> * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf32-arc.c (JLI): Define. * reloc.c: Add JLI relocations. gas/ 2017-07-19 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/jli-1.d: New file. * testsuite/gas/arc/jli-1.s: Likewise. * testsuite/gas/arc/taux.d: Update for jli_base. include/ 2017-07-19 Claudiu Zissulescu <claziss@synopsys.com> John Eric Martin <John.Martin@emmicro-us.com> * elf/arc-reloc.def: Add JLI relocs howto. * opcode/arc-func.h (replace_jli): New function. ld/ 2017-07-19 Claudiu Zissulescu <claziss@synopsys.com> John Eric Martin <John.Martin@emmicro-us.com> * emulparams/arcelf.sh (JLI_START_TABLE): Define. * scripttempl/elfarc.sc: Handle jlitab section. * scripttempl/elfarcv2.sc: Likewise. * testsuite/ld-arc/arc.exp: Add JLI test. * testsuite/ld-arc/jli-script.ld: New file. * testsuite/ld-arc/jli-simple.dd: Likewise. * testsuite/ld-arc/jli-simple.rd: Likewise. * testsuite/ld-arc/jli-simple.s: Likewise. * testsuite/ld/testsuite/ld-arc/jli-overflow.s: Likewise. * testsuite/ld/testsuite/ld-arc/jli-overflow.d: Likewise. * testsuite/ld/testsuite/ld-arc/jli-overflow.err: Likewise. opcode/ 2017-07-19 Claudiu Zissulescu <claziss@synopsys.com> John Eric Martin <John.Martin@emmicro-us.com> * arc-opc.c (UIMM10_6_S_JLIOFF): Define. (UIMM3_23): Adjust accordingly. * arc-regs.h: Add/correct jli_base register. * arc-tbl.h (jli_s): Likewise.
2017-06-26RISC-V: Use pc-relative relocation for FDE initial locationKuan-Lin Chen1-0/+1
The symbol address in .eh_frame may be adjusted in _bfd_elf_discard_section_eh_frame, and the content of .eh_frame will be adjusted in _bfd_elf_write_section_eh_frame. Therefore, we cannot insert a relocation whose addend symbol is in .eh_frame. Othrewise, the value may be adjusted twice. bfd/ChangeLog 2017-06-26 Kuan-Lin Chen <rufus@andestech.com> * elfnn-riscv.c (perform_relocation): Support the new R_RISCV_32_PCREL relocation. (riscv_elf_relocate_section): Likewise. * elfxx-riscv.c (howto_table): Likewise. (riscv_reloc_map): Likewise. * bfd-in2.h (BFD_RELOC_RISCV_32_PCREL): New relocation. * libbfd.h: Regenerate. gas/ChangeLog 2017-06-26 Kuan-Lin Chen <rufus@andestech.com> * config/tc-riscv.c (md_apply_fix) [BFD_RELOC_32]: Convert to a R_RISCV_32_PCREL relocation. include/ChangeLog 2017-06-26 Kuan-Lin Chen <rufus@andestech.com> * elf/riscv.h (R_RISCV_32_PCREL): New.
2017-06-16Rewrite __start and __stop symbol handlingAlan Modra1-0/+3
This arranges for __start and __stop symbols to be defined before garbage collection, for all target formats. That should allow the COFF and PE --gc-sections to keep a singleton orphan input section, a feature lost by 2017-06-13 commit cbd0eecf26. The fancier ELF treatment of keeping all input sections associated with a __start or __stop symbol, from 2015-10-23 commit 1cce69b9dc, is retained. .startof. and .sizeof. symbols are deliberately not defined before garbage collection, so these won't affect garbage collection of sections. The patch also ensures __start, __stop, .startof. and .sizeof. symbols are defined before target size_dynamic_sections is called, albeit with a preliminary value, so that target code doesn't need to cope with a symbol changing from undefined at size_dynamic_sections to defined at relocate_section. Also, a number of problems with the testcases have been fixed. PR ld/20022 PR ld/21557 PR ld/21562 PR ld/21571 include/ * bfdlink.h (struct bfd_link_hash_entry): Delete undef.section. bfd/ * targets.c (struct bfd_target): Add _bfd_define_start_stop. (BFD_JUMP_TABLE_LINK): Likewise. * elf-bfd.h (bfd_elf_define_start_stop): Declare. * elflink.c (_bfd_elf_gc_mark_rsec): Update comment. (bfd_elf_define_start_stop): New function. * linker.c (bfd_generic_define_start_stop): New function. * coff64-rs6000.c (rs6000_xcoff64_vec, rs6000_xcoff64_aix_vec): Init new field. * aout-adobe.c (aout_32_bfd_define_start_stop): Define. * aout-target.h (MY_bfd_define_start_stop): Define. * aout-tic30.c (MY_bfd_define_start_stop): Define. * binary.c (binary_bfd_define_start_stop): Define. * bout.c (b_out_bfd_define_start_stop): Define. * coff-alpha.c (_bfd_ecoff_bfd_define_start_stop): Define. * coff-mips.c (_bfd_ecoff_bfd_define_start_stop): Define. * coff-rs6000.c (_bfd_xcoff_bfd_define_start_stop): Define. * coffcode.h (coff_bfd_define_start_stop): Define. * elfxx-target.h (bfd_elfNN_bfd_define_start_stop): Define. * i386msdos.c (msdos_bfd_define_start_stop): Define. * i386os9k.c (os9k_bfd_define_start_stop): Define. * ieee.c (ieee_bfd_define_start_stop): Define. * ihex.c (ihex_bfd_define_start_stop): Define. * libbfd-in.h (_bfd_nolink_bfd_define_start_stop): Define. * mach-o-target.c (bfd_mach_o_bfd_define_start_stop): Define. * mmo.c (mmo_bfd_define_start_stop): Define. * nlm-target.h (nlm_bfd_define_start_stop): Define. * oasys.c (oasys_bfd_define_start_stop): Define. * pef.c (bfd_pef_bfd_define_start_stop): Define. * plugin.c (bfd_plugin_bfd_define_start_stop): Define. * ppcboot.c (ppcboot_bfd_define_start_stop): Define. * som.c (som_bfd_define_start_stop): Define. * srec.c (srec_bfd_define_start_stop): Define. * tekhex.c (tekhex_bfd_define_start_stop): Define. * versados.c (versados_bfd_define_start_stop): Define. * vms-alpha.c (vms_bfd_define_start_stop): Define. (alpha_vms_bfd_define_start_stop): Define. * xsym.c (bfd_sym_bfd_define_start_stop): Define. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. ld/ * emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Don't set __start/__stop syms here. * ldlang.c (lang_set_startof): Delete. (start_stop_syms, start_stop_count, start_stop_alloc): New vars. (lang_define_start_stop, lang_init_start_stop, foreach_start_stop, undef_start_stop, lang_undef_start_stop, lang_init_startof_sizeof, set_start_stop, lang_finalize_start_stop): New functions. (lang_process): Call _start_stop functions. * testsuite/ld-elf/pr21562a.d: Use xfail rather than notarget. Correct typos and list of xfail targets. * testsuite/ld-elf/pr21562b.d: Likewise. * testsuite/ld-elf/pr21562c.d: Likewise. * testsuite/ld-elf/pr21562d.d: Likewise. * testsuite/ld-elf/pr21562e.d: Likewise. * testsuite/ld-elf/pr21562f.d: Likewise. * testsuite/ld-elf/pr21562g.d: Likewise. * testsuite/ld-elf/pr21562h.d: Likewise. * testsuite/ld-elf/pr21562i.d: Likewise. * testsuite/ld-elf/pr21562j.d: Likewise. * testsuite/ld-elf/pr21562k.d: Likewise. * testsuite/ld-elf/pr21562l.d: Likewise. * testsuite/ld-elf/pr21562m.d: Likewise. * testsuite/ld-elf/pr21562n.d: Likewise. * testsuite/ld-elf/sizeofa.d: Likewise. Adjust to pass for generic ELF. * testsuite/ld-elf/sizeofb.d: Likewise. * testsuite/ld-elf/startofa.d: Likewise. * testsuite/ld-elf/startofb.d: Likewise.
2017-05-10bfd: new BFD target entry point _bfd_set_reloc.Jose E. Marchesi1-0/+8
This patch adds a new entry point to the BFD_JUMP_TABLE_RELOCS. The previous common implementation `bfd_set_reloc', in bfd/bfd.c, has been moved to bfd/reloc.c with the name `_bfd_generic_set_reloc', and all BFD targets has been adapted to use it. This patch doesn't introduce any change on functionality, but prepares the ground for further work. bfd/ChangeLog: 2017-05-10 Jose E. Marchesi <jose.marchesi@oracle.com> * targets.c (BFD_JUMP_TABLE_RELOCS): Add NAME##_set_reloc. (struct bfd_target): New field _bfd_set_reloc. * bfd.c (bfd_set_reloc): Call backend _set_bfd. * reloc.c (_bfd_generic_set_reloc): New function. * coffcode.h (coff_set_reloc): Define to _bfd_generic_set_reloc. * nlm-target.h (nlm_set_reloc): Likewise. * coff-rs6000.c (_bfd_xcoff_set_reloc): Likewise. * aout-tic30.c (MY_set_reloc): Likewise. * aout-target.h (MY_set_reloc): Likewise. * elfxx-target.h (bfd_elfNN_set_reloc): Likewise. * coff-alpha.c (_bfd_ecoff_set_reloc): Likewise. * mach-o-target.c (bfd_mach_o_set_reloc): Likewise. * vms-alpha.c (alpha_vms_set_reloc): Likewise. * aout-adobe.c (aout_32_set_reloc): Likewise. * bout.c (b_out_set_reloc): Likewise. * coff-mips.c (_bfd_ecoff_set_reloc): Likewise. * i386os9k.c (aout_32_set_reloc): Likewise. * ieee.c (ieee_set_reloc): Likewise. * oasys.c (oasys_set_reloc): Likewise. * som.c (som_set_reloc): Likewise. * versados.c (versados_set_reloc): Likewise. * coff64-rs6000.c (rs6000_xcoff64_vec): Add _bfd_generic_set_reloc. (rs6000_xcoff64_aix_vec): LIkewise. * libbfd.c (_bfd_norelocs_set_reloc): New function. * libbfd-in.h: Prototype for _bfd_norelocs_set_reloc. * i386msdos.c (msdos_set_reloc): Define to _bfd_norelocs_set_reloc. * elfcode.h (elf_set_reloc): Define. * bfd-in2.h: Regenerated.
2017-03-30Add support for the WebAssembly file format and the wasm32 ELF conversion to ↵Pip Cet1-0/+10
gas and the binutils. binutils * readelf.c: Add support for wasm32 ELF format WebAssembly files. (guess_is_rela): Likewise. (dump_relocations): Likewise. (is_32bit_abs_reloc): Likewise. (is_none_reloc_): Likewise. * NEWS: Mention the new support. * testsuite/lib/binutils-common.exp (is_elf_format): Mark wasm32 as ELF target. (supports_gnu_unique): Mark wasm32 as supporting STB_GNU_UNIQUE. * testsuite/binutils-all/nm.exp: Mark wasm32 as requiring .size annotations. * testsuite/binutils-all/wasm32: New directory. * testsuite/binutils-all/wasm32/create-wasm.d: New file. * testsuite/binutils-all/wasm32/create-wasm.s: Likewise. * testsuite/binutils-all/wasm32/custom-section.d: Likewise. * testsuite/binutils-all/wasm32/custom-section.s: Likewise. * testsuite/binutils-all/wasm32/invalid-wasm-1.d: Likewise. * testsuite/binutils-all/wasm32/invalid-wasm-1.s: Likewise. * testsuite/binutils-all/wasm32/long-sections.d: Likewise. * testsuite/binutils-all/wasm32/long-sections.s: Likewise. * testsuite/binutils-all/wasm32/parse-wasm.d: Likewise. * testsuite/binutils-all/wasm32/parse-wasm.s: Likewise. * testsuite/binutils-all/wasm32/parse-wasm-2.d: Likewise. * testsuite/binutils-all/wasm32/parse-wasm-2.s: Likewise. * testsuite/binutils-all/wasm32/prepared-section.d: Likewise. * testsuite/binutils-all/wasm32/prepared-section.s: Likewise. * testsuite/binutils-all/wasm32/wasm32.exp: New file, run tests. gas * config/tc-wasm32.h: New file: Add WebAssembly assembler target. * config/tc-wasm32.c: New file: Add WebAssembly assembler target. * Makefile.am: Add WebAssembly assembler target. * configure.tgt: Add WebAssembly assembler target. * doc/c-wasm32.texi: New file: Start documenting WebAssembly assembler. * doc/all.texi: Define WASM32. * doc/as.texinfo: Add WebAssembly entries. * NEWS: Mention the new support. * Makefile.in: Regenerate. * po/gas.pot: Regenerate. * po/POTFILES.in: Regenerate. * testsuite/gas/wasm32: New directory. * testsuite/gas/wasm32/allinsn.d: New file. * testsuite/gas/wasm32/allinsn.s: New file. * testsuite/gas/wasm32/illegal.l: New file. * testsuite/gas/wasm32/illegal.s: New file. * testsuite/gas/wasm32/illegal-2.l: New file. * testsuite/gas/wasm32/illegal-2.s: New file. * testsuite/gas/wasm32/illegal-3.l: New file. * testsuite/gas/wasm32/illegal-3.s: New file. * testsuite/gas/wasm32/illegal-4.l: New file. * testsuite/gas/wasm32/illegal-4.s: New file. * testsuite/gas/wasm32/illegal-5.l: New file. * testsuite/gas/wasm32/illegal-5.s: New file. * testsuite/gas/wasm32/illegal-6.l: New file. * testsuite/gas/wasm32/illegal-6.s: New file. * testsuite/gas/wasm32/illegal-7.l: New file. * testsuite/gas/wasm32/illegal-7.s: New file. * testsuite/gas/wasm32/illegal-8.l: New file. * testsuite/gas/wasm32/illegal-8.s: New file. * testsuite/gas/wasm32/illegal-9.l: New file. * testsuite/gas/wasm32/illegal-9.s: New file. * testsuite/gas/wasm32/illegal-10.l: New file. * testsuite/gas/wasm32/illegal-10.s: New file. * testsuite/gas/wasm32/illegal-11.l: New file. * testsuite/gas/wasm32/illegal-11.s: New file. * testsuite/gas/wasm32/illegal-12.l: New file. * testsuite/gas/wasm32/illegal-12.s: New file. * testsuite/gas/wasm32/illegal-13.l: New file. * testsuite/gas/wasm32/illegal-13.s: New file. * testsuite/gas/wasm32/illegal-14.l: New file. * testsuite/gas/wasm32/illegal-14.s: New file. * testsuite/gas/wasm32/illegal-15.l: New file. * testsuite/gas/wasm32/illegal-15.s: New file. * testsuite/gas/wasm32/illegal-16.l: New file. * testsuite/gas/wasm32/illegal-16.s: New file. * testsuite/gas/wasm32/illegal-17.l: New file. * testsuite/gas/wasm32/illegal-17.s: New file. * testsuite/gas/wasm32/illegal-18.l: New file. * testsuite/gas/wasm32/illegal-18.s: New file. * testsuite/gas/wasm32/illegal-19.l: New file. * testsuite/gas/wasm32/illegal-19.s: New file. * testsuite/gas/wasm32/illegal-20.l: New file. * testsuite/gas/wasm32/illegal-20.s: New file. * testsuite/gas/wasm32/illegal-21.l: New file. * testsuite/gas/wasm32/illegal-21.s: New file. * testsuite/gas/wasm32/illegal-22.l: New file. * testsuite/gas/wasm32/illegal-22.s: New file. * testsuite/gas/wasm32/illegal-24.l: New file. * testsuite/gas/wasm32/illegal-24.s: New file. * testsuite/gas/wasm32/illegal-25.l: New file. * testsuite/gas/wasm32/illegal-25.s: New file. * testsuite/gas/wasm32/reloc.d: New file. * testsuite/gas/wasm32/reloc.s: New file. * testsuite/gas/wasm32/wasm32.exp: New tests for WebAssembly architecture. opcodes * configure.ac: Add (empty) bfd_wasm32_arch target. * configure: Regenerate * po/opcodes.pot: Regenerate. include * opcode/wasm.h: New file to support wasm32 architecture. * elf/wasm32.h: Add R_WASM32_32 relocation. bfd * elf32-wasm32.c: Add relocation code, two relocs. * reloc.c: Add wasm32 relocations. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. * bfd/po/bfd.pot: Regenerate.
2017-03-13Rename R_AARCH64_TLSDESC_LD64_LO12_NC to R_AARCH64_TLSDESC_LD64_LO12 and ↵Nick Clifton1-2/+2
R_AARCH64_TLSDESC_ADD_LO12_NC to R_AARCH64_TLSDESC_ADD_LO12. PR binutils/21202 include * elf/aarch64.h (R_AARCH64_TLSDESC_LD64_LO12_NC): Rename to R_AARCH64_TLSDESC_LD64_LO12. (R_AARCH64_TLSDESC_ADD_LO12_NC): Rename to R_AARCH64_TLSDESC_ADD_LO12_NC. bfd * reloc.c (BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC): Rename to BFD_RELOC_AARCH64_TLSDESC_LD64_LO12. (BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC): Rename to BFD_RELOC_AARCH64_TLSDESC_ADD_LO12. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elfnn-aarch64.c (IS_AARCH64_TLS_RELAX_RELOC): Update reloc names. (IS_AARCH64_TLSDESC_RELOC): Likewise. (elfNN_aarch64_howto_table): Likewise. (aarch64_tls_transition_without_check): Likewise. (aarch64_reloc_got_type): Likewise. (elfNN_aarch64_final_link_relocate): Likewise. (elfNN_aarch64_tls_relax): Likewise. (elfNN_aarch64_relocate_section): Likewise. (elfNN_aarch64_gc_sweep_hook): Likewise. (elfNN_aarch64_check_relocs): Likewise. * elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise. (_bfd_aarch64_elf_resolve_relocation): Likewise. gas * config/tc-aarch64.c (reloc_table): Rename BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC to BFD_RELOC_AARCH64_TLSDESC_LD64_LO12. Rname BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC to BFD_RELOC_AARCH64_TLSDESC_ADD_LO12. (md_apply_fix): Likewise. (aarch64_force_relocation): Likewise. * testsuite/gas/aarch64/tls.d: Update regexp. ld * testsuite/ld-aarch64/ifunc-5r-local.d: Update regexp.
2017-02-28PowerPC addpcis fixAlan Modra1-0/+1
This came up because I was looking at ld/tmpdir/addpcis.o and noticed the odd addends on REL16DX_HA. They ought to both be -4. The error crept in due REL16DX_HA howto being pc-relative (as indeed it should be), and code at gas/write.c:1001 after this comment /* Make it pc-relative. If the back-end code has not selected a pc-relative reloc, cancel the adjustment we do later on all pc-relative relocs. */ *not* cancelling the pc-relative adjustment. So I've made a dummy non-relative split reloc so that the generic code handles this, rather than attempting to add hacks later in md_apply_fix which would not be very robust. Having the new internal reloc also makes it easy to support addpcis rx,sym@ha as an equivalent to addpcis rx,(sym-0f)@ha 0: The patch also fixes overflow checking, which must test whether the addi will overflow too since @l relocs don't have any overflow check. Lastly, since I was poking at md_apply_fix, I arranged to have the generic gas/write.c code emit errors for subtraction expressions where we lack reloc support. include/ * elf/ppc64.h (R_PPC64_16DX_HA): New. Expand fake reloc comment. * elf/ppc.h (R_PPC_16DX_HA): Likewise. bfd/ * reloc.c (BFD_RELOC_PPC_16DX_HA): New. * elf64-ppc.c (ppc64_elf_howto_raw <R_PPC64_16DX_HA>): New howto. (ppc64_elf_reloc_type_lookup): Translate new bfd reloc. (ppc64_elf_ha_reloc): Correct overflow test on REL16DX_HA. (ppc64_elf_relocate_section): Likewise. * elf32-ppc.c (ppc_elf_howto_raw <R_PPC_16DX_HA>): New howto. (ppc_elf_reloc_type_lookup): Translate new bfd reloc. (ppc_elf_check_relocs): Handle R_PPC_16DX_HA to pacify gcc. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. gas/ * config/tc-ppc.c (md_assemble): Use BFD_RELOC_PPC_16DX_HA for addpcis. (md_apply_fix): Remove fx_subsy check. Move code converting to pcrel reloc earlier and handle BFD_RELOC_PPC_16DX_HA. Remove code emiiting errors on seeing fx_pcrel set on unexpected relocs, as that is done now by the generic code via.. * config/tc-ppc.h (TC_FORCE_RELOCATION_SUB_LOCAL): ..this. Define. (TC_VALIDATE_FIX_SUB): Define. ld/ * testsuite/ld-powerpc/addpcis.d: Define ext1 and ext2 at limits of addpcis range.
2017-02-17bfd: Rename bsd_write_armap and coff_write_armapPedro Alves1-5/+5
Give these bfd-internal symbols with external linkage a _bfd_ prefix to avoid collisions in the global symbol namespace. bfd/ChangeLog: 2017-02-17 Pedro Alves <palves@redhat.com> * archive.c (bsd_write_armap): Rename to ... (_bfd_bsd_write_armap): ... this. (coff_write_armap): Rename to ... (_bfd_coff_write_armap): ... this. * libbfd-in.h (bsd_write_armap): Rename to ... (_bfd_bsd_write_armap): ... this. (coff_write_armap): Rename to ... (_bfd_coff_write_armap): ... this. * aout-target.h, aout-tic30.c: Adjust all users. * libbfd.h: Regenerate.
2017-02-17bfd: Rename real_{ftell, fseek, fopen}Pedro Alves1-3/+3
Give these bfd-internal symbols with external linkage a _bfd_ prefix to avoid collisions in the global symbol namespace. bfd/ChangeLog: 2017-02-17 Pedro Alves <palves@redhat.com> * bfdio.c (real_ftell): Rename to ... (_bfd_real_ftell): ... this. (real_fseek): Rename to ... (_bfd_real_fseek): ... this. (real_fopen): Rename to ... (_bfd_real_fopen): ... this. * libbfd-in.h (real_ftell): Rename to ... (_bfd_real_ftell): ... this. (real_fseek): Rename to ... (_bfd_real_fseek): ... this. (real_fopen): Rename to ... (_bfd_real_fopen): ... this. * cache.c, dwarf2.c, opncls.c: Adjust all callers. * libbfd.h: Regenerate.
2017-02-17bfd: Rename read_{signed,unsigned}_leb128, safe_read_leb128Pedro Alves1-4/+4
Give these bfd-internal symbols with external linkage a _bfd_ prefix to avoid collisions in the global symbol namespace. bfd/ChangeLog: 2017-02-17 Pedro Alves <palves@redhat.com> * dwarf2.c, elf-attrs.c, elf32-nds32.c: Adjust all callers. * libbfd.c (read_unsigned_leb128): Rename to ... (_bfd_read_unsigned_leb128): ... this. (read_signed_leb128): Rename to ... (_bfd_read_signed_leb128): ... this. (safe_read_leb128): Rename to ... (_bfd_safe_read_leb128): ... this. * libbfd-in.h (read_unsigned_leb128): Rename to ... (_bfd_read_unsigned_leb128): ... this. (read_signed_leb128): Rename to ... (_bfd_read_signed_leb128): ... this. (safe_read_leb128): Rename to ... (_bfd_safe_read_leb128): ... this. * libbfd.h: Renegerate.
2017-01-02Update year range in copyright notice of all files.Alan Modra1-1/+1
2016-12-31PRU BFD supportDimitar Dimitrov1-0/+12
include/ * elf/common.h: Add PRU ELF. * elf/pru.h: New file. * opcode/pru.h: New file. * dis-asm.h (print_insn_pru): Declare. bfd/ * archures.c: Add bfd_arch_pru. * Makefile.am: Add PRU target. * config.bfd: Ditto. * configure.ac: Ditto. * elf-bfd.h (enum elf_target_id): Add PRU_ELF_DATA. * targets.c: Add pru_elf32_vec. * reloc.c: Add PRU relocations. * cpu-pru.c: New file. * elf32-pru.c: New file. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. * bfd-in2.h: Regenerate * libbfd.h: Regenerate. Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
2016-12-24Remove "collect" forms of generic linker add symbols functionsAlan Modra1-6/+0
Nothing calls them and they were in the way of a bug fix. * linker.c (generic_link_add_symbols): Delete. Merge into.. (_bfd_generic_link_add_symbols): ..here. (generic_link_check_archive_element_no_collect): Delete. (generic_link_check_archive_element_collect): Likewise. (generic_link_add_object_symbols): Remove "collect" param. Update callers. (generic_link_add_symbol_list): Likewise. (generic_link_check_archive_element): Likewise. Call bfd_link_add_symbols rather than generic_link_add_object_symbols. * libbfd-in.h (_bfd_generic_link_add_symbols_collect): Delete. * libbfd.h: Regenerate.
2016-12-22Don't make_bfd_vms_lib archive functions NULLAlan Modra1-8/+10
Contrary to the comment, they can in fact be called. * libbfd-in.h (_bfd_vms_lib_slurp_armap): Use _bfd_noarchive function. (_bfd_vms_lib_slurp_extended_name_table: Likewise. (_bfd_vms_lib_construct_extended_name_table: Likewise. (_bfd_vms_lib_truncate_arname: Likewise. (_bfd_vms_lib_write_armap: Likewise. (_bfd_vms_lib_read_ar_hdr: Likewise. (_bfd_vms_lib_write_ar_hdr: Likewise. * libbfd.h: Regenerate.
2016-12-20Rework RISC-V relocationsAndrew Waterman1-0/+9
Before this commit we didn't cleanly support CFI directives because the internal offsets used to get relaxed which broke them. This patch significantly reworks how we handle linker relaxations: * DWARF is now properly supported * There is a ".option norelax" to disable relaxations, for when users write assembly that can't be relaxed (if it's to be later patched up, for example). * There is an additional _RELAX relocation that specifies when previous relocations can be relaxed. We're in the process of documenting the RISC-V ELF ABI, which will include documentation of our relocations https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md but we expect that this relocation set will remain ABI compatible in the future (ie, it's safe to release). Thanks to Kuan-Lin Chen for figuring out how to correctly relax the debug info! include/ * elf/riscv.h: Add R_RISCV_TPREL_I through R_RISCV_SET32. bfd/ * reloc.c (BFD_RELOC_RISCV_TPREL_I): New relocation. (BFD_RELOC_RISCV_TPREL_S): Likewise. (BFD_RELOC_RISCV_RELAX): Likewise. (BFD_RELOC_RISCV_CFA): Likewise. (BFD_RELOC_RISCV_SUB6): Likewise. (BFD_RELOC_RISCV_SET8): Likewise. (BFD_RELOC_RISCV_SET8): Likewise. (BFD_RELOC_RISCV_SET16): Likewise. (BFD_RELOC_RISCV_SET32): Likewise. * elfnn-riscv.c (perform_relocation): Handle the new relocations. (_bfd_riscv_relax_tls_le): Likewise. (_bfd_riscv_relax_align): Likewise. (_bfd_riscv_relax_section): Likewise. (howto_table): Likewise. (riscv_reloc_map): Likewise. (relax_func_t): New type. (_bfd_riscv_relax_call): Add reserve_size argument, which controls the maximal offset pessimism. Correct type of max_alignment. (_bfd_riscv_relax_lui): Likewise. (_bfd_riscv_relax_tls_le): Likewise. (_bfd_riscv_relax_align): Likewise. (_bfd_riscv_relax_section): Compute the required reserve size when relocating and use it to when calling relax_func. * bfd-in2.h: Regenerate. * libbfd.h: Likewise. gas/ * config/tc-riscv.c (riscv_set_options): Add relax. (riscv_opts): Likewise. (s_riscv_option): Add relax and norelax. (riscv_apply_const_reloc): New function. (append_insn): Move constant relocation handling to riscv_apply_const_reloc. (md_pcrel_from): Likewise. (parse_relocation): Skip BFD_RELOC_UNUSED. (md_pcrel_from): Handle BFD_RELOC_RISCV_SUB6, BFD_RELOC_RISCV_RELAX, BFD_RELOC_RISCV_CFA. (md_apply_fix): Likewise. (riscv_pre_output_hook): New function. * config/tc-riscv.h (md_pre_output_hook): Define. (riscv_pre_output_hook): Declare. (DWARF_CIE_DATA_ALIGNMENT): Always -4.
2016-11-01Add support for RISC-V architecture.Nick Clifton1-0/+38
bfd * Makefile.am: Add entries for riscv32-elf and riscv64-elf. * config.bdf: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * archures.c: Add bfd_riscv_arch. * reloc.c: Add riscv relocs. * targets.c: Add riscv_elf32_vec and riscv_elf64_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf-bfd.h: Add RISCV_ELF_DATA to enum elf_target_id. * elfnn-riscv.c: New file. * elfxx-riscv.c: New file. * elfxx-riscv.h: New file. binutils* readelf.c (guess_is_rela): Add EM_RISCV. (get_machine_name): Likewise. (dump_relocations): Add support for riscv relocations. (get_machine_flags): Add support for riscv flags. (is_32bit_abs_reloc): Add R_RISCV_32. (is_64bit_abs_reloc): Add R_RISCV_64. (is_none_reloc): Add R_RISCV_NONE. * testsuite/binutils-all/objdump.exp (cpus_expected): Add riscv. Expect the debug_ranges test to fail. gas * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this architecture. * configure.in: Define a default architecture. * configure: Regenerate. * configure.tgt: Add entries for riscv. * doc/as.texinfo: Likewise. * testsuite/gas/all/gas.exp: Expect the redef tests to fail. * testsuite/gas/elf/elf.exp: Expect the groupauto tests to fail. * config/tc-riscv.c: New file. * config/tc-riscv.h: New file. * doc/c-riscv.texi: New file. * testsuite/gas/riscv: New directory. * testsuite/gas/riscv/riscv.exp: New file. * testsuite/gas/riscv/t_insns.d: New file. * testsuite/gas/riscv/t_insns.s: New file. ld * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this target. * configure.tgt: Add riscv entries. * emulparams/elf32lriscv-defs.sh: New file. * emulparams/elf32lriscv.sh: New file. * emulparams/elf64lriscv-defs.sh: New file. * emulparams/elf64lriscv.sh: New file. * emultempl/riscvelf.em: New file. opcodes * configure.ac: Add entry for bfd_riscv_arch. * configure: Regenerate. * disassemble.c (disassembler): Add support for riscv. (disassembler_usage): Likewise. * riscv-dis.c: New file. * riscv-opc.c: New file. include * dis-asm.h: Add prototypes for print_insn_riscv and print_riscv_disassembler_options. * elf/riscv.h: New file. * opcode/riscv-opc.h: New file. * opcode/riscv.h: New file.
2016-10-07Pass link_info to _bfd_merge_private_bfd_dataAlan Modra1-2/+2
Most BFD linker functions take a bfd_link_info param, which reinforces the fact that they are linker functions and allow access to linker callbacks, eg. einfo for printing errors. I was going to use einfo for --fatal-warnings support before I decided a better way was the patch commit 4519d071. bfd/ * targets.c (bfd_target <_bfd_merge_private_bfd_data>): Replace obfd param with struct bfd_link_info param. Update all callers. * linker.c (bfd_merge_private_bfd_data): Likewise. (_bfd_generic_verify_endian_match): Likewise. * aoutf1.h (sunos_merge_private_bfd_data): Likewise. * coff-arm.c (coff_arm_merge_private_bfd_data): Likewise. * elf-attrs.c (_bfd_elf_merge_object_attributes): Likewise. * elf-bfd.h (_bfd_elf_ppc_merge_fp_attributes): Likewise. (_bfd_elf_merge_object_attributes): Likewise. * elf-m10300.c (_bfd_mn10300_elf_merge_private_bfd_data): Likewise. * elf-s390-common.c (elf_s390_merge_obj_attributes): Likewise. * elf32-arc.c (arc_elf_merge_private_bfd_data): Likewise. * elf32-arm.c (elf32_arm_merge_eabi_attributes): Likewise. (elf32_arm_merge_private_bfd_data): Likewise. * elf32-bfin.c (elf32_bfin_merge_private_bfd_data): Likewise. * elf32-cr16.c (_bfd_cr16_elf_merge_private_bfd_data): Likewise. * elf32-cris.c (cris_elf_merge_private_bfd_data): Likewise. * elf32-frv.c (frv_elf_merge_private_bfd_data): Likewise. * elf32-h8300.c (elf32_h8_merge_private_bfd_data): Likewise. * elf32-i370.c (i370_elf_merge_private_bfd_data): Likewise. * elf32-iq2000.c (iq2000_elf_merge_private_bfd_data): Likewise. * elf32-m32c.c (m32c_elf_merge_private_bfd_data): Likewise. * elf32-m32r.c (m32r_elf_merge_private_bfd_data): Likewise. * elf32-m68hc1x.c (_bfd_m68hc11_elf_merge_private_bfd_data): Likewise. * elf32-m68hc1x.h (_bfd_m68hc11_elf_merge_private_bfd_data): Likewise. * elf32-m68k.c (elf32_m68k_merge_private_bfd_data): Likewise. * elf32-mcore.c (mcore_elf_merge_private_bfd_data): Likewise. * elf32-mep.c (mep_elf_merge_private_bfd_data): Likewise. * elf32-msp430.c (elf32_msp430_merge_mspabi_attributes): Likewise. (elf32_msp430_merge_private_bfd_data): Likewise. * elf32-mt.c (mt_elf_merge_private_bfd_data): Likewise. * elf32-nds32.c (nds32_elf_merge_private_bfd_data): Likewise. * elf32-nios2.c (nios2_elf32_merge_private_bfd_data): Likewise. * elf32-or1k.c (elf32_or1k_merge_private_bfd_data): Likewise. * elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): Likewise. (ppc_elf_merge_obj_attributes): Likewise. (ppc_elf_merge_private_bfd_data): Likewise. * elf32-rl78.c (rl78_elf_merge_private_bfd_data): Likewise. * elf32-rx.c (rx_elf_merge_private_bfd_data): Likewise. * elf32-s390.c (elf32_s390_merge_private_bfd_data): Likewise. * elf32-score.c (s3_elf32_score_merge_private_bfd_data): Likewise. (elf32_score_merge_private_bfd_data): Likewise. * elf32-score.h (s7_elf32_score_merge_private_bfd_data): Likewise. * elf32-score7.c (s7_elf32_score_merge_private_bfd_data): Likewise. * elf32-sh.c (sh_merge_bfd_arch, sh_elf_merge_private_data): Likewise. * elf32-sh64.c (sh64_elf_merge_private_data): Likewise. * elf32-sparc.c (elf32_sparc_merge_private_bfd_data): Likewise. * elf32-tic6x.c (elf32_tic6x_merge_attributes): Likewise. (elf32_tic6x_merge_private_bfd_data): Likewise. * elf32-v850.c (v850_elf_merge_private_bfd_data): Likewise. * elf32-vax.c (elf32_vax_merge_private_bfd_data): Likewise. * elf32-visium.c (visium_elf_merge_private_bfd_data): Likewise. * elf32-xtensa.c (elf_xtensa_merge_private_bfd_data): Likewise. * elf64-ia64-vms.c (elf64_ia64_merge_private_bfd_data): Likewise. * elf64-ppc.c (ppc64_elf_merge_private_bfd_data): Likewise. * elf64-s390.c (elf64_s390_merge_private_bfd_data): Likewise. * elf64-sh64.c (sh_elf64_merge_private_data): Likewise. * elf64-sparc.c (elf64_sparc_merge_private_bfd_data): Likewise. * elfnn-aarch64.c (elfNN_aarch64_merge_private_bfd_data): Likewise. * elfnn-ia64.c (elfNN_ia64_merge_private_bfd_data): Likewise. * elfxx-mips.c (mips_elf_merge_obj_e_flags): Likewise. (mips_elf_merge_obj_attributes): Likewise. (_bfd_mips_elf_merge_private_bfd_data): Likewise. * elfxx-mips.h (_bfd_mips_elf_merge_private_bfd_data): Likewise. * elfxx-sparc.c (_bfd_sparc_elf_merge_private_bfd_data): Likewise. * elfxx-sparc.h (_bfd_sparc_elf_merge_private_bfd_data): Likewise. * elfxx-target.h (bfd_elfNN_bfd_merge_private_bfd_data): Likewise. * elfxx-tilegx.c (_bfd_tilegx_elf_merge_private_bfd_data): Likewise. * elfxx-tilegx.h (_bfd_tilegx_elf_merge_private_bfd_data): Likewise. * libbfd-in.h (_bfd_generic_bfd_merge_private_bfd_data): Likewise. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. ld/ * ldlang.c (lang_check): Update bfd_merge_private_bfd_data call.
2016-10-07bfd_merge_private_bfd_data tidyAlan Modra1-8/+6
bfd_merge_private_bfd_data and _bfd_generic_verify_endian_match are linker functions, so move them to linker.c. bfd/ * Makefile.am (LIBBFD_H_FILES): Update. * doc/Makefile.am (LIBBFD_H_DEP): Likewise. * cpu-sh.c (sh_merge_bfd_arch): Move to.. * elf32-sh.c: ..here, and make static. * elf32-arc.c (arc_elf_merge_private_bfd_data): Delete extraneous error. * elf32-cris.c (cris_elf_merge_private_bfd_data): Don't call _bfd_generic_verify_endian_match. * elf32-microblaze.c (microblaze_elf_merge_private_bfd_data): Delete. (bfd_elf32_bfd_merge_private_bfd_data): Define as _bfd_generic_verify_endian_match. * elf32-mt.c (mt_elf_merge_private_bfd_data): Don't test boolean == FALSE. * elf32-xgate.c (_bfd_xgate_elf_merge_private_bfd_data): Delete. (bfd_elf32_bfd_merge_private_bfd_data): Don't define. * elf32-xgate.h (_bfd_xgate_elf_merge_private_bfd_data): Delete. * libbfd-in.h (_bfd_generic_verify_endian_match): Delete. * libbfd.c (_bfd_generic_verify_endian_match): Move to.. * linker.c: ..here, and make internal. * bfd.c (bfd_merge_private_bfd_data): Move to.. * linker.c: ..here. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. opcodes/ * sh-opc.h (sh_merge_bfd_arch): Delete prototype.
2016-09-30Make bfd_error_handler_type like vprintfAlan Modra1-3/+1
It was like printf, which means you can't use bfd_set_error_handler to hook in a function to do something and then call the original handler. The patch also deletes some unused functions and makes pointers local. bfd/ * bfd-in.h: Include stdarg.h. * bfd.c (bfd_error_handler_type): Make like vprintf. (_bfd_error_internal): Rename from _bfd_error_handler. Make static. (error_handler_internal): New function, split out from.. (_bfd_default_error_handler): ..here. Rename to _bfd_error_handler. (bfd_set_error_handler): Update. (bfd_get_error_handler, bfd_get_assert_handler): Delete. (_bfd_assert_handler): Make static. * coffgen.c (null_error_handler): Update params. * elf-bfd.h (struct elf_backend_data <link_order_error_handler>): Don't use bfd_error_handler_type. * elf64-mmix.c (mmix_dump_bpo_gregs): Likewise. * elfxx-target.h (elf_backend_link_order_error_handler): Default to _bfd_error_handler. * libbfd-in.h (_bfd_default_error_handler): Don't declare. (bfd_assert_handler_type): Likewise. (_bfd_error_handler): Update. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. ld/ * ldlang.c (ignore_bfd_errors): Update params.
2016-08-26Fixes to legacy ARC relocations.Cupertino Miranda1-3/+4
Added support for ARC_SDA_12 reloc. Fixed ARC_N32_ME. Added ME (middle-endian) to ARC_SDA_12 reloc. bfd/ChangeLog: Cupertino Miranda <cmiranda@synopsys.com> * reloc.c: Fixed type in ARC_SECTOFF relocations. Added ARC_SDA_12 relocation. * bfd-in2.h: Regenerated from the previous changes. * libbfd.h: Regenerated from the previous changes. include/ChangeLog: Cupertino Miranda <cmiranda@synopsys.com> * elf/arc-reloc.def: Fixed relocation formula for N*, SDA, SDA_12, SDA_16_LD*, S13_PCREL, N32_ME, SECTOFF_* relocations. * opcode/arc-func.h (replace_disp12s): Added. Used for SDA_12 relocation.
2016-07-16Don't include libbfd.h outside of bfd, part 2Alan Modra1-3/+0
Make bfd_default_set_arch_mach available to a bunch of gas backend files. bfd/ * archures.c (bfd_default_set_arch_mach): Make available in bfd.h. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. gas/ * config/tc-epiphany.c: Don't include libbfd.h. * config/tc-frv.c: Likewise. * config/tc-ip2k.c: Likewise. * config/tc-iq2000.c: Likewise. * config/tc-m32c.c: Likewise. * config/tc-mep.c: Likewise. * config/tc-mt.c: Likewise. * config/tc-nios2.c: Likewise.
2016-07-16Don't include libbfd.h outside of bfd, part 1Alan Modra1-9/+0
Make BFD_ALIGN available to objcopy. Fix assertions. Don't use bfd_log2 in ppc32elf.em or bfd_malloc in xtensaelf.em and bucomm.c. bfd/ * libbfd-in.h (BFD_ALIGN): Move to.. * bfd-in.h: ..here. * elf32-ppc.h (struct ppc_elf_params): Add pagesize. * elf32-ppc.c (default_params): Adjust init. (ppc_elf_link_params): Set pagesize_p2. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. binutils/ * ar.c: Don't include libbfd.h. * objcopy.c: Likewise. * bucomm.c (bfd_get_archive_filename): Use xmalloc rather than bfd_malloc. gas/ * config/bfin-parse.y: Don't include libbfd.h. * config/tc-bfin.c: Likewise. * config/tc-rl78.c: Likewise. * config/tc-rx.c: Likewise. * config/tc-metag.c: Likewise. (create_dspreg_htabs, create_scond_htab): Use gas_assert not BFD_ASSERT. * Makefile.am: Update dependencies. * Makefile.in: Regenerate. ld/ * ldlang.c: Don't include libbfd.h. * emultempl/nds32elf.em: Likewise. * emultempl/ppc64elf.em: Likewise. * emultempl/ppc32elf.em: Likewise. (pagesize): Delete. (params): Update init. (ppc_after_open_output): Use params.pagesize. Don't call bfd_log2. (PARSE_AND_LIST_ARGS_CASES): Use params.pagesize. * emultempl/sh64elf.em: Don't include libbfd.h. (after_allocation): Use ASSERT, not BFD_ASSERT. * emultempl/xtensaelf.em: Don't include libbfd.h. (replace_insn_sec_with_prop_sec): Use xmalloc, not bfd_malloc. * Makefile.am: Update dependencies. * Makefile.in: Regenerate.
2016-06-28MIPS16: Add R_MIPS16_PC16_S1 branch relocation supportMaciej W. Rozycki1-0/+1
For R_MIPS16_PC16_S1 the calculation is `(sign_extend(A) + S - P) >> 1' and the usual MIPS16 bit shuffling applies to relocated field handling, as per the encoding of the branch target in the extended form of the MIPS16 B, BEQZ, BNEZ, BTEQZ and BTNEZ instructions. include/ * elf/mips.h (R_MIPS16_PC16_S1): New relocation. bfd/ * elf32-mips.c (elf_mips16_howto_table_rel): Add R_MIPS16_PC16_S1. (mips16_reloc_map): Likewise. * elf64-mips.c (mips16_elf64_howto_table_rel): Likewise. (mips16_elf64_howto_table_rela): Likewise. (mips16_reloc_map): Likewise. * elfn32-mips.c (elf_mips16_howto_table_rel): Likewise. (elf_mips16_howto_table_rela): Likewise. (mips16_reloc_map): Likewise. * elfxx-mips.c (mips16_branch_reloc_p): New function. (mips16_reloc_p): Handle R_MIPS16_PC16_S1. (b_reloc_p): Likewise. (mips_elf_calculate_relocation): Likewise. (_bfd_mips_elf_check_relocs): Likewise. * reloc.c (BFD_RELOC_MIPS16_16_PCREL_S1): New relocation. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-mips.c (mips16_reloc_p): Handle BFD_RELOC_MIPS16_16_PCREL_S1. (b_reloc_p): Likewise. (limited_pcrel_reloc_p): Likewise. (md_pcrel_from): Likewise. (md_apply_fix): Likewise. (tc_gen_reloc): Likewise. (md_convert_frag): Likewise. (mips_fix_adjustable): Update comment. * testsuite/gas/mips/mips16-branch-reloc-2.d: Remove error output, add dump patterns. * testsuite/gas/mips/mips16-branch-reloc-3.d: Remove error output, add dump patterns. * testsuite/gas/mips/mips16-branch-addend-2.d: Remove error output, add dump patterns. * testsuite/gas/mips/mips16-branch-addend-3.d: Remove error output, add dump patterns. * testsuite/gas/mips/mips16-branch-absolute.d: Remove error output, add dump patterns. * testsuite/gas/mips/mips16-branch-reloc-2.l: Remove file. * testsuite/gas/mips/mips16-branch-reloc-3.l: Remove file. * testsuite/gas/mips/mips16-branch-addend-2.l: Remove file. * testsuite/gas/mips/mips16-branch-addend-3.l: Remove file. * testsuite/gas/mips/mips16-branch-absolute.l: Remove file. * testsuite/gas/mips/mips16-branch-addend-2.s: Add padding. * testsuite/gas/mips/branch-weak.s: Adjust alignment, avoid implicit instruction padding, avoid MIPS16 JR->JRC conversion. * testsuite/gas/mips/branch-weak-6.d: New test. * testsuite/gas/mips/branch-weak-7.d: New test. * testsuite/gas/mips/mips.exp: Run the new tests. ld/ * testsuite/ld-mips-elf/mips16-branch-2.d: New test. * testsuite/ld-mips-elf/mips16-branch-3.d: New test. * testsuite/ld-mips-elf/mips16-branch-addend-2.d: New test. * testsuite/ld-mips-elf/mips16-branch-addend-3.d: New test. * testsuite/ld-mips-elf/mips16-branch.s: New test source. * testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
2016-05-25Enable 64-bit archives in ar and ranlibH.J. Lu1-0/+23
Since existing ld and gold support the 64-bit (MIPS) ELF archives, we can use the 64-bit (MIPS) ELF archives as 64-bit archives. Since the plugin target is used to create archive in plugin-enabled ar, we need a way to enable 64-bit archives in the plugin target. This patch adds --enable-64-bit-archive to bfd to force 64-bit archives in ar and ranlib. Since both 64-bit MIPS and s390 ELF targets currently use 64-bit archives, 64-bit archives are enabled by default for them. 64-bit archive is generated automatically if the archive is too big. Tested on Linux/x86 and Linux/x86-64 with existing ld and gold. bfd/ PR binutils/14625 * archive.c (bfd_slurp_armap): Replace bfd_elf64_archive_slurp_armap with _bfd_archive_64_bit_slurp_armap. (bsd_write_armap): Call _bfd_archive_64_bit_write_armap if BFD64 is defined and the archive is too big. (coff_write_armap): Likewise. * archive64.c (bfd_elf64_archive_slurp_armap): Renamed to ... (_bfd_archive_64_bit_slurp_armap): This. (bfd_elf64_archive_write_armap): Renamed to ... (_bfd_archive_64_bit_write_armap): This. * configure.ac: Add --enable-64-bit-archive. (want_64_bit_archive): New. Set to true by default for 64-bit MIPS and s390 ELF targets. (USE_64_BIT_ARCHIVE): New AC_DEFINE. * config.in: Regenerated. * configure: Likewise. * elf64-mips.c (bfd_elf64_archive_functions): Removed. (bfd_elf64_archive_slurp_armap): Likewise. (bfd_elf64_archive_write_armap): Likewise. (bfd_elf64_archive_slurp_extended_name_table): Likewise. (bfd_elf64_archive_construct_extended_name_table): Likewise. (bfd_elf64_archive_truncate_arname): Likewise. (bfd_elf64_archive_read_ar_hdr): Likewise. (bfd_elf64_archive_write_ar_hdr): Likewise. (bfd_elf64_archive_openr_next_archived_file): Likewise. (bfd_elf64_archive_get_elt_at_index): Likewise. (bfd_elf64_archive_generic_stat_arch_elt): Likewise. (bfd_elf64_archive_update_armap_timestamp): Likewise. * elf64-s390.c (bfd_elf64_archive_functions): Removed. (bfd_elf64_archive_slurp_armap): Likewise. (bfd_elf64_archive_write_armap): Likewise. (bfd_elf64_archive_slurp_extended_name_table): Likewise. (bfd_elf64_archive_construct_extended_name_table): Likewise. (bfd_elf64_archive_truncate_arname): Likewise. (bfd_elf64_archive_read_ar_hdr): Likewise. (bfd_elf64_archive_write_ar_hdr): Likewise. (bfd_elf64_archive_openr_next_archived_file): Likewise. (bfd_elf64_archive_get_elt_at_index): Likewise. (bfd_elf64_archive_generic_stat_arch_elt): Likewise. (bfd_elf64_archive_update_armap_timestamp): Likewise. * elfxx-target.h (TARGET_BIG_SYM): Use _bfd_archive_64_bit on BFD_JUMP_TABLE_ARCHIVE if USE_64_BIT_ARCHIVE is defined and bfd_elfNN_archive_functions isn't defined. (TARGET_LITTLE_SYM): Likewise. * libbfd-in.h (_bfd_archive_64_bit_slurp_armap): New prototype. (_bfd_archive_64_bit_write_armap): Likewise. (_bfd_archive_64_bit_slurp_extended_name_table): New macro. (_bfd_archive_64_bit_construct_extended_name_table): Likewise. (_bfd_archive_64_bit_truncate_arname): Likewise. (_bfd_archive_64_bit_read_ar_hdr): Likewise. (_bfd_archive_64_bit_write_ar_hdr): Likewise. (_bfd_archive_64_bit_openr_next_archived_file): Likewise. (_bfd_archive_64_bit_get_elt_at_index): Likewise. (_bfd_archive_64_bit_generic_stat_arch_elt): Likewise. (_bfd_archive_64_bit_update_armap_timestamp): Likewise. * libbfd.h: Regenerated. * plugin.c (plugin_vec): Use _bfd_archive_64_bit on BFD_JUMP_TABLE_ARCHIVE if USE_64_BIT_ARCHIVE is defined. binutils/ PR binutils/14625 * NEWS: Mention --enable-64-bit-archive.
2016-05-23Enable R_AARCH64_NONE for 64-bit code.Jim Wilson1-0/+1
* elfnn-aarch64.c: Unconditionally enable R_AARCH64_NULL and R_AARCH64_NONE. Use HOWTO64 for R_AARCH64_NULL. * relocs.c: Add BFD_RELOC_AARCH64_NULL. * bfd-in2.h: Regenerate. * libbfd.h: Likewise.
generated by cgit v1.1 at 2024-11-16 03:42:56 +0000