aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-05-24Clear GDB internal state after each unit testYao Qi3-0/+14
GDB has some global variables, like sentinel_frame, current_thread_arch, and etc, we need to reset them after each unit tests. gdb: 2017-05-24 Yao Qi <yao.qi@linaro.org> * selftest-arch.c (tests_with_arch): Call registers_changed and reinit_frame_cache. * selftest.c (run_self_tests): Likewise.
2017-05-24Move print_insn_XXX to an opcodes internal headerYao Qi72-146/+205
With the changes done in previous patches, print_insn_XXX functions don't have to be external visible out of opcodes, because both gdb and objdump select disassemblers through a single interface. This patch moves these print_insn_XXX declarations from include/dis-asm.h to opcodes/disassemble.h, which is a new header added by this patch. include: 2017-05-24 Yao Qi <yao.qi@linaro.org> * dis-asm.h: Move some function declarations to opcodes/disassemble.h. opcodes: 2017-05-24 Yao Qi <yao.qi@linaro.org> * alpha-dis.c: Include disassemble.h, don't include dis-asm.h. * avr-dis.c, bfin-dis.c, cr16-dis.c: Likewise. * crx-dis.c, d10v-dis.c, d30v-dis.c: Likewise. * disassemble.c, dlx-dis.c, epiphany-dis.c: Likewise. * fr30-dis.c, ft32-dis.c, h8300-dis.c, h8500-dis.c: Likewise. * hppa-dis.c, i370-dis.c, i386-dis.c: Likewise. * i860-dis.c, i960-dis.c, ip2k-dis.c: Likewise. * iq2000-dis.c, lm32-dis.c, m10200-dis.c: Likewise. * m10300-dis.c, m32r-dis.c, m68hc11-dis.c: Likewise. * m68k-dis.c, m88k-dis.c, mcore-dis.c: Likewise. * metag-dis.c, microblaze-dis.c, mmix-dis.c: Likewise. * moxie-dis.c, msp430-dis.c, mt-dis.c: * nds32-dis.c, nios2-dis.c, ns32k-dis.c: Likewise. * or1k-dis.c, pdp11-dis.c, pj-dis.c: Likewise. * ppc-dis.c, pru-dis.c, riscv-dis.c: Likewise. * rl78-dis.c, s390-dis.c, score-dis.c: Likewise. * sh-dis.c, sh64-dis.c, tic30-dis.c: Likewise. * tic4x-dis.c, tic54x-dis.c, tic6x-dis.c: Likewise. * tic80-dis.c, tilegx-dis.c, tilepro-dis.c: Likewise. * v850-dis.c, vax-dis.c, visium-dis.c: Likewise. * w65-dis.c, wasm32-dis.c, xc16x-dis.c: Likewise. * xgate-dis.c, xstormy16-dis.c, xtensa-dis.c: Likewise. * z80-dis.c, z8k-dis.c: Likewise. * disassemble.h: New file.
2017-05-24Use disassemble.c:disassembler select rs6000 disassemblerYao Qi2-14/+5
Nowadays, rs6000 disassembler is selected in different ways in opcodes and gdb, opcodes: case bfd_arch_rs6000: if (mach == bfd_mach_ppc_620) disassemble = print_insn_big_powerpc; else disassemble = print_insn_rs6000; break; gdb: if (arch == bfd_arch_rs6000) set_gdbarch_print_insn (gdbarch, print_insn_rs6000); else set_gdbarch_print_insn (gdbarch, gdb_print_insn_powerpc); I am not sure which one is the right one. However, such selection should be done in one place instead of two. gdb: 2017-05-24 Yao Qi <yao.qi@linaro.org> * rs6000-tdep.c (gdb_print_insn_powerpc): Remove. (rs6000_gdbarch_init): Don't call set_gdbarch_print_insn.
2017-05-24Use disassemble.c:disassembler select rl78 disassemblerYao Qi4-4/+15
This patch changes rl78 to let disassble.c:disassembler select disassembler. rl78_get_disassembler doesn't handle the case that abfd is NULL, so this patch also fix it. gdb: 2017-05-24 Yao Qi <yao.qi@linaro.org> * rl78-tdep.c (rl78_gdbarch_init): Don't call set_gdbarch_print_insn. opcodes: 2017-05-24 Yao Qi <yao.qi@linaro.org> * rl78-dis.c (rl78_get_disassembler): If parameter abfd is NULL, set cpu to E_FLAG_RL78_ANY_CPU.
2017-05-24Use disassemble.c:disassembler select h8300 disassemblerYao Qi2-4/+5
opcodes/disassble.c:disassembler select h8300 disassembler like this, if (mach == bfd_mach_h8300h || mach == bfd_mach_h8300hn) disassemble = print_insn_h8300h; else if (mach == bfd_mach_h8300s || mach == bfd_mach_h8300sn || mach == bfd_mach_h8300sx || mach == bfd_mach_h8300sxn) disassemble = print_insn_h8300s; else disassemble = print_insn_h8300; which is the same as what gdb/h8300-tdpe.c does, switch (info.bfd_arch_info->mach) { case bfd_mach_h8300: ... set_gdbarch_print_insn (gdbarch, print_insn_h8300); case bfd_mach_h8300h: case bfd_mach_h8300hn: ... set_gdbarch_print_insn (gdbarch, print_insn_h8300h); case bfd_mach_h8300s: case bfd_mach_h8300sn: ... set_gdbarch_print_insn (gdbarch, print_insn_h8300s); so we can leave disassble.c:disassembler doing the selection. gdb: 2017-05-24 Yao Qi <yao.qi@linaro.org> * h8300-tdep.c (h8300_gdbarch_init): Don't call set_gdbarch_print_insn.
2017-05-24Delegate opcodes to select disassembler in GDBYao Qi39-124/+73
This patch changes GDB to use disassembler selected by opcodes in default, so that we don't have to duplicate the selection logic again in GDB side. For example, gdb/score-tdep.c has static int score_print_insn (bfd_vma memaddr, struct disassemble_info *info) { if (info->endian == BFD_ENDIAN_BIG) return print_insn_big_score (memaddr, info); else return print_insn_little_score (memaddr, info); } and opcodes/disassemble.c has the same logic, case bfd_arch_score: if (big) disassemble = print_insn_big_score; else disassemble = print_insn_little_score; This patch removes the logic in GDB and calls opcodes/disassemble.c:disassembler in default to select disassembler. gdb: 2017-05-24 Yao Qi <yao.qi@linaro.org> * alpha-tdep.c (alpha_gdbarch_init): Don't call set_gdbarch_print_insn. * arc-tdep.c (arc_gdbarch_init): Likewise. * arch-utils.c: include dis-asm.h. (default_print_insn): New function. * arch-utils.h (default_print_insn): Declare. * avr-tdep.c (avr_gdbarch_init): Don't call set_gdbarch_print_insn. * bfin-tdep.c (bfin_gdbarch_init): Likewise. * cris-tdep.c (cris_delayed_get_disassembler): Remove. (cris_gdbarch_init): Don't call set_gdbarch_print_insn. * frv-tdep.c (frv_gdbarch_init): Likewise. * ft32-tdep.c (ft32_gdbarch_init): Likewise. * gdbarch.sh (print_insn): Use default_print_insn. * gdbarch.c: Regenerated. * hppa-tdep.c (hppa_gdbarch_init): Likewise. * iq2000-tdep.c (iq2000_gdbarch_init): Likewise. * lm32-tdep.c (lm32_gdbarch_init): Likewise. * m32c-tdep.c (m32c_gdbarch_init): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * m68hc11-tdep.c (gdb_print_insn_m68hc11): Remove. (m68hc11_gdbarch_init): Don't call set_gdbarch_print_insn. * m68k-tdep.c (m68k_gdbarch_init): Likewise. * m88k-tdep.c (m88k_gdbarch_init): Likewise. * microblaze-tdep.c (microblaze_gdbarch_init): Likewise. * mn10300-tdep.c (mn10300_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * msp430-tdep.c (msp430_gdbarch_init): Likewise. * mt-tdep.c (mt_gdbarch_init): Likewise. * nds32-tdep.c (nds32_gdbarch_init): Likewise. * nios2-tdep.c (nios2_print_insn): Remove. (nios2_gdbarch_init): Don't call set_gdbarch_print_insn. * rx-tdep.c (rx_gdbarch_init): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * score-tdep.c (score_print_insn): Remove. (score_gdbarch_init): Don't call set_gdbarch_print_insn. * sh-tdep.c (sh_gdbarch_init): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * sparc-tdep.c (sparc32_gdbarch_init): Likewise. * tic6x-tdep.c (tic6x_print_insn): Remove. (tic6x_gdbarch_init): Don't call set_gdbarch_print_insn. * tilegx-tdep.c (tilegx_gdbarch_init): Likewise. * v850-tdep.c (v850_gdbarch_init): Likewise. * vax-tdep.c (vax_gdbarch_init): Likewise. * xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise. * xtensa-tdep.c (xtensa_gdbarch_init): Likewise.
2017-05-24Refactor disassembler selectionYao Qi8-19/+57
Nowadays, opcodes/disassemble.c:disassembler selects the proper disassembler according to ABFD only. However, it actually selects disassemblers according to arch, mach, endianess, and abfd. This patch adds them to the parameters of disassembler, so that its caller can still select disassemblers in case that abfd is NULL (a typical case in GDB). There isn't any functionality change. binutils: 2017-05-24 Yao Qi <yao.qi@linaro.org> * objdump.c (disassemble_data): Caller update. include: 2017-05-24 Yao Qi <yao.qi@linaro.org> * dis-asm.h (disassembler): Update declaration. opcodes: 2017-05-24 Yao Qi <yao.qi@linaro.org> * disassemble.c (disassembler): Add arguments a, big and mach. Use them. sim/common: 2017-05-24 Yao Qi <yao.qi@linaro.org> * sim-trace.c (trace_disasm): Caller update.
2017-05-24Automatic date update in version.inGDB Administrator1-1/+1
2017-05-23Use mips_regnum instead of constants for FreeBSD/mips register operations.John Baldwin2-13/+26
gdb/ChangeLog: * mips-fbsd-tdep.c (MIPS_PC_REGNUM): Remove. (MIPS_FP0_REGNUM): Remove. (MIPS_FSR_REGNUM): Remove. (mips_fbsd_supply_fpregs): Use mips_regnum. (mips_fbsd_supply_gregs): Likewise. (mips_fbsd_collect_fpregs): Likewise. (mips_fbsd_collect_gregs): Likewise.
2017-05-23Cleanups to FreeBSD/mips native register operations.John Baldwin2-11/+21
Compare against the "raw" PC register number instead of the cooked register number when determining if a register was handled by PT_GETREGS. Previously the register fetch/store operations only tried PT_GETREGS to fetch any individual register. The result was that fetching or storing an individual register not covered by PT_GETREGS (such as floating point registers) did not work. While here, remove an early exit to simplify the code flow from the PT_GETREGS / PT_SETREGS case, and add a getfpregs_supplies similar to getregs_supplies to describe the registers supplied by PT_GETFPREGS and PT_SETFPREGS. gdb/ChangeLog: * mips-fbsd-nat.c (getregs_supplies): Fix upper bound comparison. (getpfpregs_supplies): New function. (mips_fbsd_fetch_inferior_registers): Remove early exit and use getfpregs_supplies. (mips_fbsd_store_inferior_registers): Likewise.
2017-05-23x86: Update notrackbad tests for non-ELF targetsH.J. Lu3-10/+18
* gas/testsuite/gas/i386/notrackbad.l: Updated for non-ELF targets. * gas/testsuite/gas/i386/x86-64-notrackbad.l: Likewise.
2017-05-23PR21503, Gold doesn't create linker stub symbols on ppc64Alan Modra3-27/+190
PR 21503 * options.h: Add --emit-stub-syms option. * powerpc.cc (object_id): New. (Powerpc_relobj): Add uniq_ and accessor. Sort variables for better packing. (Powerpc_dynobj): Sort variables for better packing. (Target_powerpc::define_local): New function. (Target_powerpc::group_sections): Pass stub table size to Stub_table constructor. (Target_powerpc::do_relax): Define stub and glink symbols. (Stub_table): Add uniq_ variable, and id param to constructor. (Stub_table::Plt_stub_ent): Add indx_ variable. (Stub_table::Branch_stub_entries): Move typedef earlier. (Stub_table::branch_stub_size): Replace "to" parameter with a Branch_stub_entries iterator. (Stub_table::add_long_branch_entry): Adjust to suit. (Stub_table::add_plt_call_entry): Set indx_. (Stub_table::define_stub_syms): New function.
2017-05-23[ARC] Reformat error messages.claziss2-10/+16
gas/ 2017-05-23 Claudiu Zissulescu <claziss@synopsys.com> * config/tc-arc.c (md_apply_fix): Use as_bad_where. (assemble_insn): Use as_bad.
2017-05-23[ARC] Fix fall through warnings.claziss2-0/+9
bfd/ 2017-05-23 Dilian Palauzov <git-dpa@aegee.org> * elf32-arc.c (arc_elf_merge_attributes): Add fall through comments.
2017-05-23[ARC] Update MAX_INSN_FLGS.claziss2-1/+5
It is required to parse instructions like ldb.x.a.di. include/ 2017-05-23 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (MAX_INSN_FLGS): Update to 4.
2017-05-23Automatic date update in version.inGDB Administrator1-1/+1
2017-05-22gdb: Document vMustReplyEmpty remote packetAndrew Burgess2-0/+17
Add mention of the vMustReplyEmpty to the remote serial protocol documentation. It is important that this packet be treated in the same fashion as any other unknown 'v' packet, and I have tried to reflect this in the description of the packet, it is not simply the case that we _must_ return the empty string for this packet. As the intention is that we should treat this packet as unknown then an argument could be made that we should not document it, however, for someone implementing a gdbserver from scratch, seeing an undocumented packet arrive from gdb is confusing, and will probably cause them to have to read the code in order to check how this packet should be handled, which is not ideal. gdb/doc/ChangeLog: * gdb.texinfo (Packets): Document vMustReplyEmpty packet.
2017-05-22x86: Add NOTRACK prefix supportH.J. Lu21-10669/+11157
For register indirect branches, NOTRACK prefix (0x3e), which is also the DS segment register prefix, can be used to ignore the CET indirect branch track. gas/ * config/tc-i386.c (REX_PREFIX): Changed to 7. (NOTRACK_PREFIX): New. (MAX_PREFIXES): Changed to 8. (_i386_insn): Add notrack_prefix. (PREFIX_GROUP): Add PREFIX_DS. (add_prefix): Return PREFIX_DS for DS_PREFIX_OPCODE. (md_assemble): Check if NOTRACK prefix is supported. (parse_insn): Set notrack_prefix and issue an error for other prefixes after NOTRACK prefix. * testsuite/gas/i386/i386.exp: Run tests for NOTRACK prefix. * testsuite/gas/i386/notrack-intel.d: New file. * testsuite/gas/i386/notrack.d: Likewise. * testsuite/gas/i386/notrack.s: Likewise. * testsuite/gas/i386/notrackbad.l: Likewise. * testsuite/gas/i386/notrackbad.s: Likewise. * testsuite/gas/i386/x86-64-notrack-intel.d: Likewise. * testsuite/gas/i386/x86-64-notrack.d: Likewise. * testsuite/gas/i386/x86-64-notrack.s: Likewise. * testsuite/gas/i386/x86-64-notrackbad.l: Likewise. * testsuite/gas/i386/x86-64-notrackbad.s: Likewise. include/ * include/opcode/i386.h (NOTRACK_PREFIX_OPCODE): New. opcodes/ * i386-dis.c (NOTRACK_Fixup): New. (NOTRACK): Likewise. (NOTRACK_PREFIX): Likewise. (last_active_prefix): Likewise. (reg_table): Use NOTRACK on indirect call and jmp. (ckprefix): Set last_active_prefix. (prefix_name): Return "notrack" for NOTRACK_PREFIX. * i386-gen.c (opcode_modifiers): Add NoTrackPrefixOk. * i386-opc.h (NoTrackPrefixOk): New. (i386_opcode_modifier): Add notrackprefixok. * i386-opc.tbl: Add NoTrackPrefixOk to indirect call and jmp. Add notrack. * i386-tbl.h: Regenerated.
2017-05-22x86-64: Use dynobj instead of htab->elf.dynobjH.J. Lu2-2/+6
* elf64-x86-64.c (elf_x86_64_link_setup_gnu_properties): Use dynobj instead of htab->elf.dynobj.
2017-05-22[AArch64, ld] Support ILP32 triplet aarch64*-linux-gnu_ilp32Jiong Wang2-0/+14
This patch allows AArch64 LD defaulting to ILP32 if it is configured with aarch64*-linux-gnu_ilp32. ld/ * configure.tgt: Set "targ_emul" to "aarch64linux32b" for aarch64_be-*-linux-gnu_ilp32. Set "targ_emul" to "aarch64linux32" for aarch64-*-linux-gnu_ilp32.
2017-05-22[AArch64, gas] Support ILP32 triplet aarch64*-linux-gnu_ilp32Jiong Wang6-8/+52
This patch allows AArch64 GAS defaulting to ILP32 if it is configured with aarch64*-linux-gnu_ilp32. "md_after_parse_args" is implemented to update ABI into ILP32 if DEFAULT_ARCH is "aarch64:32". gas/ * configure.tgt: Set "arch" to "aarch64" if ${cpu} equals "aarch64". Recognize the new triplet name aarch64*-linux-gnu_ilp32. * configure.ac: Output DEFAULT_ARCH macro for AArch64. * configure: Regenerate. * config/tc-aarch64.h (aarch64_after_parse_args): New declaration. (md_after_parse_args): New define. * config/tc-aarch64.c (aarch64_abi_type): New enumeration AARCH64_ABI_NONE. (DEFAULT_ARCH): New define. (aarch64_abi): Set default value to AARCH64_ABI_NONE. (aarch64_after_parse_args): New function.
2017-05-22gdb: Add John Baldwin as FreeBSD MaintainerPedro Alves2-0/+6
gdb/ChangeLog: 2017-05-22 Pedro Alves <palves@redhat.com> * MAINTAINERS (Host/Native): Add John Baldwin as FreeBSD maintainer.
2017-05-22Add PPC_MAX_REGISTER_SIZEAlan Hayward8-29/+50
gdb/ * ppc-linux-nat.c (fetch_register): Use PPC_MAX_REGISTER_SIZE. (store_register): Likewise. * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Likewise. (get_decimal_float_return_value): Likewise. (do_ppc_sysv_return_value): Likewise. (ppc64_sysv_abi_push_integer): Likewise. (ppc64_sysv_abi_push_freg): Likewise. (ppc64_sysv_abi_return_value_base): Likewise. (ppc64_sysv_abi_return_value): Likewise. * rs6000-aix-tdep.c (rs6000_push_dummy_call): Likewise. * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Likewise. * rs6000-nat.c: Likewise. * rs6000-tdep.c (rs6000_register_to_value): Likewise. (rs6000_value_to_register): Likewise. * ppc-tdep.h (PPC_MAX_REGISTER_SIZE): Add.
2017-05-22Automatic date update in version.inGDB Administrator1-1/+1
2017-05-21Print Rust unsized array types a bit more nicelyTom Tromey5-3/+82
It's a bit difficult to create an unsized array type in Rust, but if you do, right now ptype will show something like "[u8; ]". It really should print "[u8]", though, which is what this patch implements. This is part of PR 21466. Built and regtested on x86-64 Fedora 25. I'm checking this in. ChangeLog 2017-05-21 Tom Tromey <tom@tromey.com> PR rust/21466: * rust-lang.c (rust_print_type) <TYPE_CODE_ARRAY>: Print unsized arrays as "[T]", not "[T; ]". testsuite/ChangeLog 2017-05-21 Tom Tromey <tom@tromey.com> PR rust/21466: * gdb.rust/unsized.exp: New file. * gdb.rust/unsized.rs: New file.
2017-05-21Automatic date update in version.inGDB Administrator1-1/+1
2017-05-19binutils: remove sparc64/mips64 workaround in objcopy build notes merge codeJose E. Marchesi2-7/+6
This patch removes a workaround recently installed in objcopy that avoided removing duplicated notes in targets for which the number of internal relocations may be bigger than the number of external relocations. With the recent fixes in sparc64 and mips64, this workaround is no longer necessary. 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * objcopy.c (merge_gnu_build_notes): Remove workaround that prevented deleting relocations in duplicated notes in mips64 and sparc.
2017-05-19Use watchpoint's language when re-parsing expressionTom Tromey18-9/+142
PR rust/21484 notes that watch -location does not work with Rust: (gdb) watch -location a syntax error in expression, near `) 0x00007fffffffe0f4'. update_watchpoint tries to tell gdb that the new expression it creates has C syntax: /* The above expression is in C. */ b->language = language_c; However, update_watchpoint doesn't actually use this language when re-parsing the expression. Originally I was going to fix this by saving and restoring the language in update_watchpoint, but this regressed gdb.dlang/watch-loc.exp, because the constructed expression actually has D syntax (specifically the name is not parseable by C). Next I looked at directly constructing an expression, and not relying on the parser at all; but it seemed to me that upon a re-set, we'd want to reparse the type, and there is no existing API to do this correctly. So, in the end I made a hook to let each language choose what expression to use. I made all the languages other than Rust use the C expression, because that is the status quo ante. However, this is probably not truly correct. After this patch, at least, it is easy to correct by someone who knows the language(s) in question. Regtested by the buildbot. ChangeLog 2017-05-19 Tom Tromey <tom@tromey.com> PR rust/21484: * rust-lang.c (exp_descriptor_rust): New function. (rust_language_defn): Use it. * p-lang.c (pascal_language_defn): Update. * opencl-lang.c (opencl_language_defn): Update. * objc-lang.c (objc_language_defn): Update. * m2-lang.c (m2_language_defn): Update. * language.h (struct language_defn) <la_watch_location_expression>: New member. * language.c (unknown_language_defn, auto_language_defn) (local_language_defn): Update. * go-lang.c (go_language_defn): Update. * f-lang.c (f_language_defn): Update. * d-lang.c (d_language_defn): Update. * c-lang.h (c_watch_location_expression): Declare. * c-lang.c (c_watch_location_expression): New function. (c_language_defn, cplus_language_defn, asm_language_defn) (minimal_language_defn): Use it. * breakpoint.c (watch_command_1): Call la_watch_location_expression. * ada-lang.c (ada_language_defn): Update. testsuite/ChangeLog 2017-05-19 Tom Tromey <tom@tromey.com> PR rust/21484: * gdb.rust/watch.exp: New file. * gdb.rust/watch.rs: New file.
2017-05-20Automatic date update in version.inGDB Administrator1-1/+1
2017-05-20MIPS/BFD: For n64 hold the number of internal relocs in `->reloc_count'Maciej W. Rozycki10-75/+102
Revert parts of commit fee24f1c5bfe ("objdump improvements for mips elf64"), <https://sourceware.org/ml/binutils/2003-03/msg00108.html>, and make the `->reloc_count' member of `struct bfd_section' hold the actual number of internal relocations stored in its `->relocation' vector. To do so adjust `mips_elf64_slurp_one_reloc_table' to set `->reloc_count' to the actual number of internal relocations retrieved and discard `mips_elf64_canonicalize_reloc', `mips_elf64_canonicalize_dynamic_reloc' and their corresponding target macros. Contrary to the description of `mips_elf64_slurp_one_reloc_table', adjusted appropriately, this makes generic relocation processing code happy and satisfies the "merge notes section" binutils test case. Add extra binutils test cases to expand the coverage of the generic "merge notes section" test case, now passing with the n64 ABI, across the MIPS o32, n32 and n64 ABIs regardless of the default ABI selected in target configuration, and also to verify correctness of the relocations produced. Conversely, do not provide any additional test cases for the original issue addressed with the commit referred: - objdump would display only 1/3 of the total number of relocations, because it used the external relocation count, but each external relocation is brought in as 3 internal relocations. as n64 ABI relocation processing with `objdump -r' and `objdump -R' is already widely covered across the GAS and LD test suites. bfd/ * elf64-mips.c (mips_elf64_canonicalize_reloc): Remove prototype and function. (mips_elf64_canonicalize_dynamic_reloc): Likewise. (mips_elf64_slurp_one_reloc_table): Set `reloc_count' to the actual number of internal relocations retrieved. Adjust function description. (bfd_elf64_canonicalize_reloc): Remove macro. (bfd_elf64_canonicalize_dynamic_reloc): Likewise. binutils/ * testsuite/binutils-all/mips/mips-note-2.d: New test. * testsuite/binutils-all/mips/mips-note-2r.d: New test. * testsuite/binutils-all/mips/mips-note-2-n32.d: New test. * testsuite/binutils-all/mips/mips-note-2-n64.d: New test. * testsuite/binutils-all/mips/mips-note-2r-n32.d: New test. * testsuite/binutils-all/mips/mips-note-2r-n64.d: New test. * testsuite/binutils-all/mips/mips.exp: Define `has_newabi'. Run the new tests.
2017-05-20binutils/testsuite: Permit the reuse of dump patternsMaciej W. Rozycki2-1/+18
Complement commit 89210bdc8fd2 ("GAS: Permit the reuse of dump patterns"), <https://sourceware.org/ml/binutils/2010-07/msg00269.html>, and commit ef2b5578f693 ("MIPS: Enable NewABI tests for SDE targets"), <https://sourceware.org/ml/binutils/2012-08/msg00017.html>, and like the GAS and LD versions make the binutils version of `run_dump_test' also support the `dump' keyword, for reusing dump patterns between tests. binutils/ * testsuite/lib/utils-lib.exp (run_dump_test): Handle the `dump' option.
2017-05-19binutils: support for the SPARC M8 processorJose E. Marchesi43-34/+931
This patch adds support for the new SPARC M8 processor (implementing OSA 2017) to binutils. New instructions: - Dictionary Unpack + dictunpack - Partitioned Compare with shifted result + Signed variants: fpcmp{le,gt,eq,ne}{8,16,32}shl + Unsigned variants: fpcmpu{le,gt}{8,16,32}shl - Partitioned Dual-Equal compared, with shifted result + fpcmpde{8,16,32}shl - Partitioned Unsigned Range Compare, with shifted result + fpcmpur{8,16,32}shl - 64-bit shifts on Floating-Point registers + fps{ll,ra,rl}64x - Misaligned loads and stores + ldm{sh,uh,sw,uw,x,ux} + ldm{sh,uh,sw,uw,x,ux}a + ldmf{s,d} + ldmf{s,d}a + stm{h,w,x} + stm{h,w,x}a + stmf{s,d} + stmf{s,d}a - Oracle Numbers + on{add,sub,mul,div} - Reverse Bytes/Bits + revbitsb + revbytes{h,w,x} - Run-Length instructions + rle_burst + rle_length - New crypto instructions + sha3 - Instruction to read the new register %entropy + rd %entropy New Alternate Address Identifiers: - 0x24, #ASI_CORE_COMMIT_COUNT - 0x24, #ASI_CORE_SELECT_COUNT - 0x48, #ASI_ARF_ECC_REG - 0x53, #ASI_ITLB_PROBE - 0x58, #ASI_DSFAR - 0x5a, #ASI_DTLB_PROBE_PRIMARY - 0x5b, #ASI_DTLB_PROBE_REAL - 0x64, #ASI_CORE_SELECT_COMMIT_NHT The new assembler command-line options for selecting the M8 architecture are: -Av9m8 or -Asparc6 for 64-bit binaries. -Av8plusm8 for 32-bit (v8+) binaries. The corresponding disassembler command-line options are: -msparc:v9m8 for 64-bit binaries. -msparc:v8plusm8 for 32-bit (v8+) binaries. Tested for regressions in the following targets: sparc-aout sparc-linux sparc-vxworks sparc64-linux bfd/ChangeLog: 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * archures.c (bfd_mach_sparc_v9m8): Define. (bfd_mach_sparc_v8plusm8): Likewise. (bfd_mach_sparc_v9_p): Adjust to M8. (bfd_mach_sparc_64bit_p): Likewise. * aoutx.h (machine_type): Handle bfd_mach_sparc_v9m8 and bfd_mach_sparc_v8plusm8. * bfd-in2.h: Regenerated. * cpu-sparc.c (arch_info_struct): Entries for sparc:v9m8 and sparc:v8plusm8. * elfxx-sparc.c (_bfd_sparc_elf_object_p): Handle bfd_mach_sparc_v8plusm8 and bfd_mach_sparc_v9m8 using the new hw capabilities ONADDSUB, ONMUL, ONDIV, DICTUNP, FPCPSHL, RLE and SHA3. * elf32-sparc.c (elf32_sparc_final_write_processing): Handle bfd_mach_sparc_v8plusm8. binutils/ChangeLog: 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * NEWS: Mention the SPARC M8 support. gas/ChangeLog: 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * config/tc-sparc.c (sparc_arch_table): Entries for `sparc6', `v9m8' and `v8plusm8'. (sparc_md_end): Handle SPARC_OPCODE_ARCH_M8. (get_hwcap_name): Support the M8 hardware capabilities. (sparc_ip): Handle new operand types. * doc/c-sparc.texi (Sparc-Opts): Document -Av9m8, -Av8plusm8 and -Asparc6, and the corresponding -xarch aliases. * testsuite/gas/sparc/sparc6.s: New file. * testsuite/gas/sparc/sparc6.d: Likewise. * testsuite/gas/sparc/sparc6-diag.s: Likewise. * testsuite/gas/sparc/sparc6-diag.l: Likewise. * testsuite/gas/sparc/fpcmpshl.s: Likewise. * testsuite/gas/sparc/fpcmpshl.d: Likewise. * testsuite/gas/sparc/fpcmpshl-diag.s: Likewise. * testsuite/gas/sparc/fpcmpshl-diag.l: Likewise. * testsuite/gas/sparc/ldm-stm.s: Likewise. * testsuite/gas/sparc/ldm-stm.d: Likewise. * testsuite/gas/sparc/ldm-stm-diag.s: Likewise. * testsuite/gas/sparc/ldm-stm-diag.l: Likewise. * testsuite/gas/sparc/ldmf-stmf.s: Likewise. * testsuite/gas/sparc/ldmf-stmf.d: Likewise. * testsuite/gas/sparc/ldmf-stmf-diag.s: Likewise. * testsuite/gas/sparc/ldmf-stmf-diag.l: Likewise. * testsuite/gas/sparc/on.s: Likewise. * testsuite/gas/sparc/on.d: Likewise. * testsuite/gas/sparc/on-diag.s: Likewise. * testsuite/gas/sparc/on-diag.l: Likewise. * testsuite/gas/sparc/rle.s: Likewise. * testsuite/gas/sparc/rle.d: Likewise. * testsuite/gas/sparc/sparc.exp (gas_64_check): Run new tests. * testsuite/gas/sparc/rdasr.s: Add test for RDENTROPY. * testsuite/gas/sparc/rdasr.d: Likewise. include/ChangeLog: 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * elf/sparc.h (ELF_SPARC_HWCAP2_SPARC6): Define. (ELF_SPARC_HWCAP2_ONADDSUB): Likewise. (ELF_SPARC_HWCAP2_ONMUL): Likewise. (ELF_SPARC_HWCAP2_ONDIV): Likewise. (ELF_SPARC_HWCAP2_DICTUNP): Likewise. (ELF_SPARC_HWCAP2_FPCMPSHL): Likewise. (ELF_SPARC_HWCAP2_RLE): Likewise. (ELF_SPARC_HWCAP2_SHA3): Likewise. * opcode/sparc.h (sparc_opcode_arch_val): Add SPARC_OPCODE_ARCH_M8 and adjust SPARC_OPCODE_ARCH_MAX. (HWCAP2_SPARC6): Define. (HWCAP2_ONADDSUB): Likewise. (HWCAP2_ONMUL): Likewise. (HWCAP2_ONDIV): Likewise. (HWCAP2_DICTUNP): Likewise. (HWCAP2_FPCMPSHL): Likewise. (HWCAP2_RLE): Likewise. (HWCAP2_SHA3): Likewise. (OPM): Likewise. (OPMI): Likewise. (ONFCN): Likewise. (REVFCN): Likewise. (SIMM10): Likewise. opcodes/ChangeLog: 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc-dis.c (MASK_V9): Include SPARC_OPCODE_ARCH_M8. (X_IMM2): Define. (compute_arch_mask): Handle bfd_mach_sparc_v8plusm8 and bfd_mach_sparc_v9m8. (print_insn_sparc): Handle new operand types. * sparc-opc.c (MASK_M8): Define. (v6): Add MASK_M8. (v6notlet): Likewise. (v7): Likewise. (v8): Likewise. (v9): Likewise. (v9a): Likewise. (v9b): Likewise. (v9c): Likewise. (v9d): Likewise. (v9e): Likewise. (v9v): Likewise. (v9m): Likewise. (v9andleon): Likewise. (m8): Define. (HWS_VM8): Define. (HWS2_VM8): Likewise. (sparc_opcode_archs): Add entry for "m8". (sparc_opcodes): Add OSA2017 and M8 instructions dictunpack, fpcmp{ule,ugt,eq,ne,de,ur}{8,16,32}shl, fpx{ll,ra,rl}64x, ldm{sh,uh,sw,uw,x,ux}, ldm{sh,uh,sw,uw,x,ux}a, ldmf{s,d}, ldmf{s,d}a, on{add,sub,mul,div}, rdentropy, revbitsb, revbytes{h,w,x}, rle_burst, rle_length, sha3, stm{h,w,x}, stm{h,w,x}a, stmf{s,d}, stmf{s,d}a. (asi_table): New M8 ASIs ASI_CORE_COMMIT_COUNT, ASI_CORE_SELECT_COUNT, ASI_ARF_ECC_REG, ASI_ITLB_PROBE, ASI_DSFAR, ASI_DTLB_PROBE_PRIMARY, ASI_DTLB_PROBE_REAL, ASI_CORE_SELECT_COMMIT_NHT.
2017-05-19x86: Add GC testcases with property sectionsH.J. Lu11-0/+108
Verify that debug section is removed by garbage collection when there is a .note.gnu.property section. * testsuite/ld-i386/i386.exp: Run property-x86-4a and property-x86-4b. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-i386/property-x86-4a.d: New file. * testsuite/ld-i386/property-x86-4a.s: Likewise. * testsuite/ld-i386/property-x86-4b.d: Likewise. * testsuite/ld-i386/property-x86-4b.s: Likewise. * testsuite/ld-x86-64/property-x86-4a.d: Likewise. * testsuite/ld-x86-64/property-x86-4a.s: Likewise. * testsuite/ld-x86-64/property-x86-4b.d: Likewise. * testsuite/ld-x86-64/property-x86-4b.s: Likewise.
2017-05-19gas: fix tests call-relax and asi-bump-warn in 32-bit SPARC ELF targetsJose E. Marchesi3-2/+8
Tested in targets: sparc-aout sparc-linux sparc-vxworks sparc64-linux 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * testsuite/gas/sparc/call-relax.d: Support 32-bit targets. * testsuite/gas/sparc/sparc.exp (gas_64_check): Use -64 to run asi-bump-warn.
2017-05-19Update avrxmega3 linker emulation to support avrxmega2 devices with flash ↵eorg-Johann Lay5-1/+71
memory visible in the SRAM address range. PR ld/21472 ld * emulparams/avrxmega3.sh (RODATA_PM_OFFSET): Set to 0x8000. * scripttempl/avr.sc (__RODATA_PM_OFFSET__) [RODATA_PM_OFFSET]: Use RODATA_PM_OFFSET as default if not already defined. (.data) [!RODATA_PM_OFFSET]: Don't include .rodata and friends. (.rodata) [RODATA_PM_OFFSET]: Put at an offset of __RODATA_PM_OFFSET__. gas * config/tc-avr.c (mcu_types): Add entries for: attiny416, attiny417, attiny816, attiny817.
2017-05-19Fix tui compilation with Solaris libcurses: clear define (PR tui/21482)Rainer Orth2-0/+14
On both mainline and the 8.0 branch, gdb compilation fails on Solaris 10 with the native libcurses like this: In file included from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/gdb_curses.h:42: 0, from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-data.h:2 6, from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-disasm.c :31: /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-disasm.c: In function `CORE_A DDR tui_disassemble(gdbarch*, tui_asm_line*, CORE_ADDR, int)': /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-disasm.c:71:19: error: `class string_file' has no member named `wclear'; did you mean `clear'? gdb_dis_out.clear (); ^ /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-disasm.c:78:19: error: `class string_file' has no member named `wclear'; did you mean `clear'? gdb_dis_out.clear (); ^ make[2]: *** [Makefile:1927: tui-disasm.o] Error 1 It turned out this happens because <curses.h> has #define clear() wclear(stdscr) This can be avoided by defining NOMACROS, which the patch below does. ncurses potentially has a similar problem, which can be avoided by defining NCURSES_NOMACROS. PR tui/21482 * gdb_curses.h (NOMACROS): Define. (NCURSES_NOMACROS): Define.
2017-05-19Fix tui compilation with Solaris libcurses: non-const last arg to mvwaddstr ↵Rainer Orth4-5/+15
(PR tui/21482) On both mainline and the 8.0 branch, gdb compilation fails on Solaris 10 with the native libcurses in gdb/tui for several instances of the same problem: /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-winsource.c: In function `void tui_erase_source_content(tui_win_info*, int)': /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-winsource.c:257:18: error: invalid conversion from `const char*' to `char*' [-fpermissive] no_src_str); ^ In file included from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/gdb_curses.h:42:0, from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-data.h:26, from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-winsource.c:33: /vol/gcc-7/lib/gcc/sparc-sun-solaris2.10/7.1.0/include-fixed/curses.h:699:12: note: initializing argument 4 of `int mvwaddstr(WINDOW*, int, int, char*)' extern int mvwaddstr(WINDOW *, int, int, char *); ^~~~~~~~~ make[2]: *** [Makefile:1927: tui-winsource.o] Error 1 Unlike ncurses, <curses.h> declares extern int mvwaddstr(WINDOW *, int, int, char *); i.e. the last arg is char *, not const char *. The patch fixes this by casting the last arg to mvwaddstr to char *, as was recently done on mainline in a newterm() call (the only difference between 8.0 and mainline gdb/tui). * tui/tui-windata.c (tui_erase_data_content): Cast last mvwaddstr arg to char *. * tui/tui-wingeneral.c (box_win): Likewise. * tui/tui-winsource.c (tui_erase_source_content): Likewise. (tui_show_source_line): Likewise. (tui_show_exec_info_content): Likewise.
2017-05-19gdb: fix TYPE_CODE_ARRAY handling in sparc targetsVladimir Mezentsev3-19/+105
gdb has a special type (TYPE_CODE_ARRAY) to support the gcc extension (https://gcc.gnu.org/onlinedocs/gcc/Vector-Extensions.html). TYPE_CODE_ARRAY is handled incorrectly for both (32- and 64-bit) modes on Sparc machines. Tested on sparc64-linux-gnu and sparc-solaris (32- and 64-bit mode). 6 tests ( from gdb/testsuite/gdb.base/gnu_vector.exp) failed on sparc64-Linux and on sparc-Solaris in 32- and 64-bit mode. Now all these tests passed. gdb/testsuite/gdb.base/gnu_vector.exp has 117 different cases for small (and not small) arrays and structures. No regressions. gdb/ChangeLog: 2017-05-19 Vladimir Mezentsev <vladimir.mezentsev@oracle.com> * sparc-tdep.c (sparc_structure_return_p) (sparc_arg_on_registers_p): New functions. (sparc32_store_arguments): Use them. * sparc64-tdep.c (sparc64_16_byte_align_p) (sparc64_store_floating_fields, sparc64_extract_floating_fields): Handle TYPE_CODE_ARRAY.
2017-05-19garbage collect debug sections when no alloc sections are keptAlan Modra2-3/+11
The pr20882 testcase fails on a number of targets that add attribute or note sections to object files, and the default linker script says those sections should be kept. This patch changes --gc-sections to drop debug and special sections like .comment when no SEC_ALLOC section in an object file is kept. The assumption is that debug sections are describing code and data that will become part of the final image in memory. * elflink.c (_bfd_elf_gc_mark_extra_sections): Don't keep debug and special sections when no non-note alloc sections in an object are kept.
2017-05-19Avoid MinGW compilation warning in readline/input.cEli Zaretskii2-0/+6
This change was already accepted upstream in Readline. readline/ChangeLog.gdb: 2017-05-19 Eli Zaretskii <eliz@gnu.org> * input.c [_WIN32]: Include <conio.h> to avoid compiler warning on MinGW.
2017-05-19MIPS/binutils/testsuite: Bail out right away if !ELFMaciej W. Rozycki2-17/+20
We have but ELF binutils tests in the MIPS subset, and non-ELF MIPS/GAS ports are gone, making a future addition of any non-ELF tests unlikely. Bail out right away then if non-ELF, consuming one level of indentation across the actual tests run. binutils/ * testsuite/binutils-all/mips/mips.exp: Bail out right away if non-ELF.
2017-05-19Automatic date update in version.inGDB Administrator1-1/+1
2017-05-18Fix test failure with Rust 1.18 and 1.19Tom Tromey2-4/+8
With Rust 1.18 and 1.19, I saw some test suite failures. They were all of the same form -- Box seems to be qualified in the output now, like: print box_some $64 = core::option::Option<alloc::boxed::Box<u8>>::Some(0x7ffff6c21018 "\001\000") ... where the test was expecting Option<Box<u8>>. This patch fixes the problem in a way that should work with earlier versions of Rust. gdb/testsuite/ChangeLog 2017-05-18 Tom Tromey <tom@tromey.com> * gdb.rust/simple.exp: Allow Box to be qualified.
2017-05-18Expect prompt after no FPU warningThomas Preud'homme2-5/+9
2017-05-18 Thomas Preud'homme <thomas.preudhomme@arm.com> gdb/testsuite/ * gdb.base/float.exp: Expect GDB prompt for targets without FPU.
2017-05-18Treat a prefix of "$SYSROOT" in the same way as "=" when parsing linker ↵Nick Clifton6-8/+40
search paths. PR ld/21251 * ldfile.c (ldfile_add_library_path): If the path starts with $SYSROOT then use the sysroot as the real prefix. * ldlang.c (lang_add_input_file): Treat $SYSROOT in the same way as =. * ldlex.l: Add $SYSROOT as allow prefix for a filename. * ld.texinfo (-L): Document that $SYSROOT acts like = when prefixing a library search path. (INPUT): Likewise. * testsuite/ld-scripts/sysroot-prefix.exp: Add $SYSROOT prefix tests.
2017-05-18gdb.base/fileio.c: Fix several -Wmaybe-uninitialized warningsPedro Alves2-5/+10
src/gdb/testsuite/gdb.base/fileio.c: In function ‘test_write’: src/gdb/testsuite/gdb.base/fileio.c:158:5: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized] printf ("write 1: ret = %d, errno = %d\n", ret, errno); ^ gdb/ChangeLog: 2017-05-18 Pedro Alves <palves@redhat.com> * gdb.base/fileio.c (test_write, test_read, test_close) (test_fstat): Don't print 'ret' in the fail path.
2017-05-18gdb.base/fileio.c: Fix several -Wreturn-type warningsPedro Alves3-26/+34
All the "test_" functions warn like: src/gdb/testsuite/gdb.base/fileio.c: In function ‘test_close’: src/gdb/testsuite/gdb.base/fileio.c:280:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ Nothing looks at the return of these functions, so just make them return void. While at it, "()" is not the same as "(void)" in C - fix that too. gdb/ChangeLog: 2017-05-18 Pedro Alves <palves@redhat.com> * gdb.base/fileio.c (stop, test_open, test_write, test_read) (test_lseek, test_close, test_stat, test_fstat, test_isatty) (test_system, test_rename, test_unlink, test_time): Change prototypes. * gdb.base/fileio.exp (stop_msg): Adjust.
2017-05-18gdb.base/fileio.exp: Remove nowarningsPedro Alves3-2/+12
... and quiet -Wnonnull in a different way. gdb/testsuite/ChangeLog: 2017-05-18 Pedro Alves <palves@redhat.com> * gdb.base/fileio.c (null_str): New global. (test_stat): Use it. * gdb.base/fileio.exp: Remove nowarnings.
2017-05-18fix changelog typoAlan Modra1-1/+2
2017-05-18Don't compare boolean values against TRUE or FALSEAlan Modra34-96/+139
bfd/ * arc-got.h: Don't compare boolean values against TRUE or FALSE. * elf-m10300.c: Likewise. * elf.c: Likewise. * elf32-arc.c: Likewise. * elf32-bfin.c: Likewise. * elf32-m68k.c: Likewise. * elf32-nds32.c: Likewise. * elf32-tilepro.c: Likewise. * elflink.c: Likewise. * elfnn-aarch64.c: Likewise. * elfnn-riscv.c: Likewise. * elfxx-tilegx.c: Likewise. * mach-o.c: Likewise. * peXXigen.c: Likewise. * vms-alpha.c: Likewise. * vms-lib.c: Likewise. opcodes/ * aarch64-asm.c: Don't compare boolean values against TRUE or FALSE. * aarch64-dis.c: Likewise. * aarch64-gen.c: Likewise. * aarch64-opc.c: Likewise. binutils/ * strings.c: Don't compare boolean values against TRUE or FALSE. gas/ * config/tc-aarch64.c: Don't compare booleans against TRUE or FALSE. * config/tc-hppa.c: Likewise. * config/tc-mips.c: Likewise. * config/tc-score7.c: Likewise. ld/ * emultempl/elf32.em: Don't compare boolean values against TRUE or FALSE. * emultempl/pe.em: Likewise. * emultempl/pep.em: Likewise. * emultempl/xtensaelf.em: Likewise.
generated by cgit v1.1 at 2025-01-24 22:40:13 +0000