aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-11-21Import errno explicitlyYao Qi5-3/+13
errno.h is included in common/common-defs.h, and gnulib errno module was imported to gdb. This patch is to import it explicitly. gdb: * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add errno. * gnulib/import/Makefile.am: Re-generated. * gnulib/import/Makefile.in: Likewise. * gnulib/import/m4/gnulib-cache.m4: Likewise.
2014-11-21Include wchar.h and wctype.h unconditionallyYao Qi2-5/+12
As gnulib modules wchar and wctype is imported, we can include wchar.h and wctype.h unconditionally. This patch is also to remove HAVE_WCHAR_H check. gdb: 2014-11-21 Yao Qi <yao@codesourcery.com> * gdb_wchar.h: Include wchar.h and wctype.h. [HAVE_ICONV && HAVE_BTOWC]: Don't check HAVE_WCHAR_T and don't include wchar.h and wctype.h. Don't check HAVE_WCHAR_H.
2014-11-21Import wchar and wctype-h explicitlyYao Qi5-3/+15
gnulib module wchar and wctype-h was imported as a dependency, but they are used by gdb_wchar.h too. This patch is to import them explicitly. gdb: * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add wchar and wctype-h. * gnulib/import/Makefile.am: Re-generated. * gnulib/import/Makefile.in: Likewise. * gnulib/import/m4/gnulib-cache.m4: Likewise.
2014-11-21Import memchr explicitlyYao Qi5-3/+13
memchr has been used in gdb source and gnulib memchr module was imported as a dependency. This patch is to import it explicitly. gdb: * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add memchr. * gnulib/import/Makefile.am: Re-generated. * gnulib/import/Makefile.in: Likewise. * gnulib/import/m4/gnulib-cache.m4: Likewise.
2014-11-21Include alloca.h unconditionallyYao Qi12-426/+26
Since gnulib alloca module was imported, we can include alloca.h in both gdb and gdbserver unconditionally, so this patch adds inclusion of alloca.h in common-defs.h. This patch also removes AC_FUNC_ALLOCA in configure.ac because we don't need to check alloca any more. This patch below is removed in fact. [RFA/commit] include alloca.h if available. https://www.sourceware.org/ml/gdb-patches/2010-08/msg00566.html Since alloca.h is from gnulib now, we don't have to check malloc.h in configure and include malloc.h in code. This patch also remove them too. gdb: 2014-11-21 Yao Qi <yao@codesourcery.com> * common/common-defs.h: Include alloca.h * configure.ac: Don't invoke AC_FUNC_ALLOCA. * configure: Re-generated. * defs.h: Remove code handling alloca. * utils.c (gdb_realpath): Don't check HAVE_ALLOCA is defined or not. gdb/gdbserver: 2014-11-21 Yao Qi <yao@codesourcery.com> * configure.ac: Don't invoke AC_FUNC_ALLOCA. (AC_CHECK_HEADERS): Remove malloc.h. * configure: Re-generated. * config.in: Re-generated. * server.h: Don't include alloca.h and malloc.h. * gdbreplay.c: Don't check HAVE_ALLOCA_H is defined. Don't include malloc.h.
2014-11-21Import alloca explicitlyYao Qi5-3/+13
gnulib's alloca module was imported to gdb, and alloca is used. This patch is to explicitly import it. gdb: * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULE): Add alloca. * gnulib/import/Makefile.am: Re-generated. * gnulib/import/Makefile.in: Likewise.. * gnulib/import/m4/gnulib-cache.m4: Likewise.
2014-11-21Make IMPORTED_GNULIB_MODULES in alphabetical orderYao Qi2-3/+8
Since we'll add more modules in this list, better to keep them in alphabetical order. gdb: * gnulib/update-gnulib.sh: Make IMPORTED_GNULIB_MODULES in alphabetical order.
2014-11-21Resolve more problems with readelf uncovered by fuzzing binary files.Nick Clifton2-1/+14
PR binutils/17531 * readelf.c (process_version_sections): Prevent an infinite loop processing corrupt version need data. (process_corefile_note_segment): Handle corrupt notes.
2014-11-21Fix a snafu setting up the string table read in from a COFF file.Alexander Cherepanov2-3/+9
PR binutils/17512 * coffgen.c (_bfd_coff_read_string_table): Test allocation of string table before clearing the first few bytes.
2014-11-21Calculate ARM arch attribute after relaxationTerry Guo11-8/+54
gas/ 2014-11-21 Terry Guo <terry.guo@arm.com> * config/tc-arm.c (md_assemble): Do not consider relaxation. (md_convert_frag): Test and set target arch attribute accordingly. (aeabi_set_attribute_string): Turn it into a global function. * config/tc-arm.h (md_post_relax_hook): Enable it for ARM target. (aeabi_set_public_attributes): Declare it. gas/testsuite/ 2014-11-21 Terry Guo <terry.guo@arm.com> * gas/arm/attr-arch-assumption.d: New file. * gas/arm/attr-arch-assumption.s: Likewise. ld/testsuite/ 2014-11-21 Terry Guo <terry.guo@arm.com> * ld-arm/tls-longplt-lib.s: Require ARMv6T2. * ld-arm/tls-longplt.s: Likewise. * ld-arm/tls-longplt-lib.d: Updated. * ld-arm/tls-longplt.d: Likewise.
2014-11-21Support ARM Cortex-M7Terry Guo33-9/+502
include/ChangeLog: 2014-11-21 Terry Guo <terry.guo@arm.com> * opcode/arm.h (FPU_VFP_EXT_ARMV8xD): New macro. (FPU_VFP_V5D16): Likewise. (FPU_VFP_V5_SP_D16): Likewise. (FPU_ARCH_VFP_V5D16): Likewise. (FPU_ARCH_VFP_V5_SP_D16): Likewise. bfd/ChangeLog: 2014-11-21 Terry Guo <terry.guo@arm.com> * elf32-arm.c (elf32_arm_merge_eabi_attributes): Support FPv5. binutils/ChangeLog: 2014-11-21 Terry Guo <terry.guo@arm.com> * readelf.c (arm_attr_tag_FP_arch): Extended to support FPv5. gas/ChangeLog: 2014-11-21 Terry Guo <terry.guo@arm.com> * config/tc-arm.c (fpu_vfp_ext_armv8xd): New. (arm_cpus): Support cortex-m7. (arm_fpus): Support fpv5-sp-d16 and fpv5-d16. (do_vfp_nsyn_cvt_fpv8): Generate error when use D register for S register only target like FPv5-SP-D16. (do_neon_cvttb_1): Likewise. (do_vfp_nsyn_fpv8): Likewise. (do_vrint_1): Likewise. (aeabi_set_public_attributes): Set proper FP arch for FPv5. * doc/c-arm.texi: Document new cpu and fpu names for cortex-m7. gas/testsuite/ChangeLog: 2014-11-21 Terry Guo <terry.guo@arm.com> * gas/arm/armv7e-m+fpv5-d16.s: New. * gas/arm/armv7e-m+fpv5-d16.d: Likewise. * gas/arm/armv7e-m+fpv5-sp-d16.s: Likewise. * gas/arm/armv7e-m+fpv5-sp-d16.d: Likewise. ld/testsuite/ChangeLog: 2014-11-21 Terry Guo <terry.guo@arm.com> * ld-arm/attr-merge-vfp-4-sp.s: New test source file. * ld-arm/attr-merge-vfp-5-sp.s: Likewise. * ld-arm/attr-merge-vfp-5.s: Likewise. * ld-arm/attr-merge-vfp-8.d: New test. * ld-arm/attr-merge-vfp-8r.d: Likewise. * ld-arm/attr-merge-vfp-9.d: Likewise. * ld-arm/attr-merge-vfp-9r.d: Likewise. * ld-arm/attr-merge-vfp-10.d: Likewise. * ld-arm/attr-merge-vfp-10r.d: Likewise. * ld-arm/attr-merge-vfp-11.d: Likewise. * ld-arm/attr-merge-vfp-11r.d: Likewise. * ld-arm/attr-merge-vfp-12.d: Likewise. * ld-arm/attr-merge-vfp-12r.d: Likewise. * ld-arm/attr-merge-vfp-13.d: Likewise. * ld-arm/attr-merge-vfp-13r.d: Likewise. * ld-arm/attr-merge-vfp-14.d: Likewise. * ld-arm/attr-merge-vfp-14r.d: Likewise. * ld-arm/arm-elf.exp: Run the new tests.
2014-11-21Handling of empty Ada ranges with a negative upper bound.Joel Brobecker7-0/+111
Consider the following variable declaration: type Array_Type is array (Integer range <>) of Integer; Var: Array_Type (0 .. -1); "ptype var" prints the wrong upper bound for that array: (gdb) ptype var type = array (0 .. 4294967295) of integer The debugging info for the type of variable "Var" is as follow: <2><cf>: Abbrev Number: 13 (DW_TAG_structure_type) <d0> DW_AT_name : foo__var___PAD <3><db>: Abbrev Number: 14 (DW_TAG_member) <dc> DW_AT_name : F <e0> DW_AT_type : <0xa5> This is just an artifact from code generation, which is just a wrapper that we should ignore. The real type is the type of field "F" in that PAD type, which is described as: <2><a5>: Abbrev Number: 10 (DW_TAG_array_type) <a6> DW_AT_name : foo__TvarS <3><b6>: Abbrev Number: 11 (DW_TAG_subrange_type) <b7> DW_AT_type : <0xc1> <bb> DW_AT_lower_bound : 0 <bc> DW_AT_upper_bound : 0xffffffff Trouble occurs because DW_AT_upper_bound is encoded using a DW_FORM_data4, which is ambiguous regarding signedness. In that case, dwarf2read.c::dwarf2_get_attr_constant_value reads the value as unsigned, which is not what we want in this case. As it happens, we already have code dealing with this situation in dwarf2read.c::read_subrange_type which checks whether the subrange's type is signed or not, and if it is, fixes the bound's value by sign-extending it: if (high.kind == PROP_CONST && !TYPE_UNSIGNED (base_type) && (high.data.const_val & negative_mask)) high.data.const_val |= negative_mask; Unfortunately, what happens in our case is that the base type of the array's subrange type is marked as being unsigned, and so we never get to apply the sign extension. Following the DWARF trail, the range's base type is described as another subrange type... <2><c1>: Abbrev Number: 12 (DW_TAG_subrange_type) <c7> DW_AT_name : foo__TTvarSP1___XDLU_0__1m <cb> DW_AT_type : <0x2d> ... whose base type is, (finally), a basic type (signed): <1><2d>: Abbrev Number: 2 (DW_TAG_base_type) <2e> DW_AT_byte_size : 4 <2f> DW_AT_encoding : 5 (signed) <30> DW_AT_name : integer The reason why GDB thinks that foo__TTvarSP1___XDLU_0__1m (the base type of the array's range type) is an unsigned type is found in gdbtypes.c::create_range_type. We consider that a range type is unsigned iff its lower bound is >= 0: if (low_bound->kind == PROP_CONST && low_bound->data.const_val >= 0) TYPE_UNSIGNED (result_type) = 1; That is normally sufficient, as one would expect the upper bound to always be greater or equal to the lower bound. But Ada actually allows the declaration of empty range types where the upper bound is less than the lower bound. In this case, the upper bound is negative, so we should not be marking the type as unsigned. This patch fixes the issue by simply checking the upper bound as well as the lower bound, and clears the range type's unsigned flag when it is found to be constant and negative. gdb/ChangeLog: * gdbtypes.c (create_range_type): Unset RESULT_TYPE's flag_unsigned if HIGH_BOUND is constant and negative. gdb/testsuite/ChangeLog: * gdb.ada/n_arr_bound: New testcase. Tested on x86_64-linux.
2014-11-21Automatic date update in version.inGDB Administrator1-1/+1
2014-11-21PPC gold doesn't check for overflow properlyAlan Modra2-4/+9
* powerpc.cc (Target_powerpc::Relocate::relocate): Correct test for undefined weaks.
2014-11-20Don't run pr17618 test on x32H.J. Lu2-0/+5
* ld-x86-64/pr17618.d: Don't run on x32.
2014-11-20Update plt-main tests for x32H.J. Lu5-6/+13
* ld-x86-64/plt-main1.rd: Updated for x32. * ld-x86-64/plt-main2.rd: Likewise. * ld-x86-64/plt-main3.rd: Likewise. * ld-x86-64/plt-main4.rd: Likewise.
2014-11-20Add function and function pointer testsH.J. Lu13-0/+154
This patch adds tests for function and function pointer. * ld-x86-64/plt-lib.c: New file. * ld-x86-64/plt-main.out: Likewise. * ld-x86-64/plt-main1.c: Likewise. * ld-x86-64/plt-main1.rd: Likewise. * ld-x86-64/plt-main2.c: Likewise. * ld-x86-64/plt-main2.rd: Likewise. * ld-x86-64/plt-main3.c: Likewise. * ld-x86-64/plt-main3.rd: Likewise. * ld-x86-64/plt-main4.c: Likewise. * ld-x86-64/plt-main4.rd: Likewise. * ld-x86-64/plt-main5.c: Likewise. * ld-x86-64/x86-64.exp: Run plt-main tests.
2014-11-20Always load function pointer into a stack variableH.J. Lu2-2/+16
This patch makes sure that compiler won't optimize out loading function into a stack variable. * ld-ifunc/ifunc-main.c (get_bar): New function. (main): Use it.
2014-11-20Add ifunc-main IFUNC testsH.J. Lu5-0/+94
* ld-ifunc/ifunc.exp: Run ifunc-main. * ld-ifunc/ifunc-lib.c: New file. * ld-ifunc/ifunc-main.c: Likewise. * ld-ifunc/ifunc-main.out: Likewise.
2014-11-20Fix build breakage from previous commitSergio Durigan Junior2-6/+15
In the previous commit, I forgot to adjust the prototypes of the functions inside gdb/xml-syscall.c for the case when GDB is compiled without XML support. gdb/ 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com> PR breakpoints/10737 * xml-syscall.c (set_xml_syscall_file_name): Remove "const" modifier from "struct gdbarch" when compiling without Expat (XML) support. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise.
2014-11-20Partial fix for PR breakpoints/10737: Make syscall info be per-arch instead ↵Sergio Durigan Junior18-104/+328
of global This patch intends to partially fix PR breakpoints/10737, which is about making the syscall information (for the "catch syscall" command) be per-arch, instead of global. This is not a full fix because of the other issues pointed by Pedro here: <https://sourceware.org/bugzilla/show_bug.cgi?id=10737#c5> However, I consider it a good step towards the real fix. It will also help me fix <https://sourceware.org/bugzilla/show_bug.cgi?id=17402>. What this patch does, basically, is move the "syscalls_info" struct to gdbarch. Currently, the syscall information is stored in a global variable inside gdb/xml-syscall.c, which means that there is no easy way to correlate this info with the current target or architecture being used, for example. This causes strange behaviors, because the syscall info is not re-read when the arch changes. For example, if you put a syscall catchpoint in syscall 5 on i386 (syscall open), and then load a x86_64 program on GDB and put the same syscall 5 there (fstat on x86_64), you will still see that GDB tells you that it is catching "open", even though it is not. With this patch, GDB correctly says that it will be catching fstat syscalls. (gdb) set architecture i386 The target architecture is assumed to be i386 (gdb) catch syscall 5 Catchpoint 1 (syscall 'open' [5]) (gdb) set architecture i386:x86-64 The target architecture is assumed to be i386:x86-64 (gdb) catch syscall 5 Catchpoint 2 (syscall 'open' [5]) But with the patch: (gdb) set architecture i386 The target architecture is assumed to be i386 (gdb) catch syscall 5 Catchpoint 1 (syscall 'open' [5]) (gdb) set architecture i386:x86-64 The target architecture is assumed to be i386:x86-64 (gdb) catch syscall 5 Catchpoint 2 (syscall 'fstat' [5]) As I said, there are still some problems on the "catch syscall" mechanism, because (for example) the user should be able to "catch syscall open" on i386, and then expect "open" to be caught also on x86_64. Currently, it doesn't work. I intend to work on this later. gdb/ 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com> PR breakpoints/10737 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Adjust call to set_xml_syscall_file_name to provide gdbarch. * arm-linux-tdep.c (arm_linux_init_abi): Likewise. * bfin-linux-tdep.c (bfin_linux_init_abi): Likewise. * breakpoint.c (print_it_catch_syscall): Adjust call to get_syscall_by_number to provide gdbarch. (print_one_catch_syscall): Likewise. (print_mention_catch_syscall): Likewise. (print_recreate_catch_syscall): Likewise. (catch_syscall_split_args): Adjust calls to get_syscall_by_number and get_syscall_by_name to provide gdbarch. (catch_syscall_completer): Adjust call to get_syscall_names to provide gdbarch. * gdbarch.c: Regenerate. * gdbarch.h: Likewise. * gdbarch.sh: Forward declare "struct syscalls_info". (xml_syscall_file): New variable. (syscalls_info): Likewise. * i386-linux-tdep.c (i386_linux_init_abi): Adjust call to set_xml_syscall_file_name to provide gdbarch. * mips-linux-tdep.c (mips_linux_init_abi): Likewise. * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise. * sparc64-linux-tdep.c (sparc64_linux_init_abi): Likewise. * xml-syscall.c: Include gdbarch.h. (set_xml_syscall_file_name): Accept gdbarch parameter. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. (my_gdb_datadir): Delete global variable. (struct syscalls_info) <my_gdb_datadir>: New variable. (struct syscalls_info) <sysinfo>: Rename variable to "syscalls_info". (sysinfo): Delete global variable. (have_initialized_sysinfo): Likewise. (xml_syscall_file): Likewise. (sysinfo_free_syscalls_desc): Rename to... (syscalls_info_free_syscalls_desc): ... this. (free_syscalls_info): Rename "sysinfo" to "syscalls_info". Adjust code to the new layout of "struct syscalls_info". (make_cleanup_free_syscalls_info): Rename parameter "sysinfo" to "syscalls_info". (syscall_create_syscall_desc): Likewise. (syscall_start_syscall): Likewise. (syscall_parse_xml): Likewise. (xml_init_syscalls_info): Likewise. Drop "const" from return value. (init_sysinfo): Rename to... (init_syscalls_info): ...this. Add gdbarch as a parameter. Adjust function to deal with gdbarch. (xml_get_syscall_number): Delete parameter sysinfo. Accept gdbarch as a parameter. Adjust code. (xml_get_syscall_name): Likewise. (xml_list_of_syscalls): Likewise. (set_xml_syscall_file_name): Accept gdbarch as parameter. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. * xml-syscall.h (set_xml_syscall_file_name): Likewise. (get_syscall_by_number): Likewise. (get_syscall_by_name): Likewise. (get_syscall_names): Likewise. gdb/testsuite/ 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com> PR breakpoints/10737 * gdb.base/catch-syscall.exp (do_syscall_tests): Call test_catch_syscall_multi_arch. (test_catch_syscall_multi_arch): New function.
2014-11-20* config/tc-arm.c (rotate_left): Avoid undefined behaviour when N = 0.Richard Earnshaw2-1/+6
2014-11-20Run IFUNC run-time tests only if IFUNC is supportedH.J. Lu3-7/+68
* lib/ld-lib.exp (check_ifunc_available): New. * ld-ifunc/ifunc.exp: Run IFUNC run-time tests only if IFUNC is supported.
2014-11-20Split struct symtab into two: struct symtab and compunit_symtab.Doug Evans46-970/+1470
Currently "symtabs" in gdb are stored as a single linked list of struct symtab that contains both symbol symtabs (the blockvectors) and file symtabs (the linetables). This has led to confusion, bugs, and performance issues. This patch is conceptually very simple: split struct symtab into two pieces: one part containing things common across the entire compilation unit, and one part containing things specific to each source file. Example. For the case of a program built out of these files: foo.c foo1.h foo2.h bar.c foo1.h bar.h Today we have a single list of struct symtabs: objfile -> foo.c -> foo1.h -> foo2.h -> bar.c -> foo1.h -> bar.h -> NULL where "->" means the "next" pointer in struct symtab. With this patch, that turns into: objfile -> foo.c(cu) -> bar.c(cu) -> NULL | | v v foo.c bar.c | | v v foo1.h foo1.h | | v v foo2.h bar.h | | v v NULL NULL where "foo.c(cu)" and "bar.c(cu)" are struct compunit_symtab objects, and the files foo.c, etc. are struct symtab objects. So now, for example, when we want to iterate over all blockvectors we can now just iterate over the compunit_symtab list. Plus a lot of the data that was either unused or replicated for each symtab in a compilation unit now lives in struct compunit_symtab. E.g., the objfile pointer, the producer string, etc. I thought of moving "language" out of struct symtab but there is logic to try to compute the language based on previously seen files, and I think that's best left as is for now. With my standard monster benchmark with -readnow (which I can't actually do, but based on my calculations), whereas today the list requires 77MB to store all the struct symtabs, it now only requires 37MB. A modest space savings given the gigabytes needed for all the debug info, etc. Still, it's nice. Plus, whereas today we create a copy of dirname for each source file symtab in a compilation unit, we now only create one for the compunit. So this patch is basically just a data structure reorg, I don't expect significant performance improvements from it. Notes: 1) A followup patch can do a similar split for struct partial_symtab. I have left that until after I get the changes I want in to better utilize .gdb_index (it may affect how we do partial syms). 2) Another followup patch *could* rename struct symtab. The term "symtab" is ambiguous and has been a source of confusion. In this patch I'm leaving it alone, calling it the "historical" name of "filetabs", which is what they are now: just the file-name + line-table. gdb/ChangeLog: Split struct symtab into two: struct symtab and compunit_symtab. * amd64-tdep.c (amd64_skip_xmm_prologue): Fetch producer from compunit. * block.c (blockvector_for_pc_sect): Change "struct symtab *" argument to "struct compunit_symtab *". All callers updated. (set_block_compunit_symtab): Renamed from set_block_symtab. Change "struct symtab *" argument to "struct compunit_symtab *". All callers updated. (get_block_compunit_symtab): Renamed from get_block_symtab. Change result to "struct compunit_symtab *". All callers updated. (find_iterator_compunit_symtab): Renamed from find_iterator_symtab. Change result to "struct compunit_symtab *". All callers updated. * block.h (struct global_block) <compunit_symtab>: Renamed from symtab. hange type to "struct compunit_symtab *". All uses updated. (struct block_iterator) <d.compunit_symtab>: Renamed from "d.symtab". Change type to "struct compunit_symtab *". All uses updated. * buildsym.c (struct buildsym_compunit): New struct. (subfiles, buildsym_compdir, buildsym_objfile, main_subfile): Delete. (buildsym_compunit): New static global. (finish_block_internal): Update to fetch objfile from buildsym_compunit. (make_blockvector): Delete objfile argument. (start_subfile): Rewrite to use buildsym_compunit. Don't initialize debugformat, producer. (start_buildsym_compunit): New function. (free_buildsym_compunit): Renamed from free_subfiles_list. All callers updated. (patch_subfile_names): Rewrite to use buildsym_compunit. (get_compunit_symtab): New function. (get_macro_table): Delete argument comp_dir. All callers updated. (start_symtab): Change result to "struct compunit_symtab *". All callers updated. Create the subfile of the main source file. (watch_main_source_file_lossage): Rewrite to use buildsym_compunit. (reset_symtab_globals): Update. (end_symtab_get_static_block): Update to use buildsym_compunit. (end_symtab_without_blockvector): Rewrite. (end_symtab_with_blockvector): Change result to "struct compunit_symtab *". All callers updated. Update to use buildsym_compunit. Don't set symtab->dirname, instead set it in the compunit. Explicitly make sure main symtab is first in its list. Set debugformat, producer, blockvector, block_line_section, and macrotable in the compunit. (end_symtab_from_static_block): Change result to "struct compunit_symtab *". All callers updated. (end_symtab, end_expandable_symtab): Ditto. (set_missing_symtab): Change symtab argument to "struct compunit_symtab *". All callers updated. (augment_type_symtab): Ditto. (record_debugformat): Update to use buildsym_compunit. (record_producer): Update to use buildsym_compunit. * buildsym.h (struct subfile) <dirname>: Delete. <producer, debugformat>: Delete. <buildsym_compunit>: New member. (get_compunit_symtab): Declare. * dwarf2read.c (struct type_unit_group) <compunit_symtab>: Renamed from primary_symtab. Change type to "struct compunit_symtab *". All uses updated. (dwarf2_start_symtab): Change result to "struct compunit_symtab *". All callers updated. (dwarf_decode_macros): Delete comp_dir argument. All callers updated. (struct dwarf2_per_cu_quick_data) <compunit_symtab>: Renamed from symtab. Change type to "struct compunit_symtab *". All uses updated. (dw2_instantiate_symtab): Change result to "struct compunit_symtab *". All callers updated. (dw2_find_last_source_symtab): Ditto. (dw2_lookup_symbol): Ditto. (recursively_find_pc_sect_compunit_symtab): Renamed from recursively_find_pc_sect_symtab. Change result to "struct compunit_symtab *". All callers updated. (dw2_find_pc_sect_compunit_symtab): Renamed from dw2_find_pc_sect_symtab. Change result to "struct compunit_symtab *". All callers updated. (get_compunit_symtab): Renamed from get_symtab. Change result to "struct compunit_symtab *". All callers updated. (recursively_compute_inclusions): Change type of immediate_parent argument to "struct compunit_symtab *". All callers updated. (compute_compunit_symtab_includes): Renamed from compute_symtab_includes. All callers updated. Rewrite to compute includes of compunit_symtabs and not symtabs. (process_full_comp_unit): Update to work with struct compunit_symtab. (process_full_type_unit): Ditto. (dwarf_decode_lines_1): Delete argument comp_dir. All callers updated. (dwarf_decode_lines): Remove special case handling of main subfile. (macro_start_file): Delete argument comp_dir. All callers updated. (dwarf_decode_macro_bytes): Ditto. * guile/scm-block.c (bkscm_print_block_syms_progress_smob): Update to use struct compunit_symtab. * i386-tdep.c (i386_skip_prologue): Fetch producer from compunit. * jit.c (finalize_symtab): Build compunit_symtab. * jv-lang.c (get_java_class_symtab): Change result to "struct compunit_symtab *". All callers updated. * macroscope.c (sal_macro_scope): Fetch macro table from compunit. * macrotab.c (struct macro_table) <compunit_symtab>: Renamed from comp_dir. Change type to "struct compunit_symtab *". All uses updated. (new_macro_table): Change comp_dir argument to cust, "struct compunit_symtab *". All callers updated. * maint.c (struct cmd_stats) <nr_compunit_symtabs>: Renamed from nr_primary_symtabs. All uses updated. (count_symtabs_and_blocks): Update to handle compunits. (report_command_stats): Update output, "primary symtabs" renamed to "compunits". * mdebugread.c (new_symtab): Change result to "struct compunit_symtab *". All callers updated. (parse_procedure): Change type of search_symtab argument to "struct compunit_symtab *". All callers updated. * objfiles.c (objfile_relocate1): Loop over blockvectors in a separate loop. * objfiles.h (struct objfile) <compunit_symtabs>: Renamed from symtabs. Change type to "struct compunit_symtab *". All uses updated. (ALL_OBJFILE_FILETABS): Renamed from ALL_OBJFILE_SYMTABS. All uses updated. (ALL_OBJFILE_COMPUNITS): Renamed from ALL_OBJFILE_PRIMARY_SYMTABS. All uses updated. (ALL_FILETABS): Renamed from ALL_SYMTABS. All uses updated. (ALL_COMPUNITS): Renamed from ALL_PRIMARY_SYMTABS. All uses updated. * psympriv.h (struct partial_symtab) <compunit_symtab>: Renamed from symtab. Change type to "struct compunit_symtab *". All uses updated. * psymtab.c (psymtab_to_symtab): Change result type to "struct compunit_symtab *". All callers updated. (find_pc_sect_compunit_symtab_from_partial): Renamed from find_pc_sect_symtab_from_partial. Change result type to "struct compunit_symtab *". All callers updated. (lookup_symbol_aux_psymtabs): Change result type to "struct compunit_symtab *". All callers updated. (find_last_source_symtab_from_partial): Ditto. * python/py-symtab.c (stpy_get_producer): Fetch producer from compunit. * source.c (forget_cached_source_info_for_objfile): Fetch debugformat and macro_table from compunit. * symfile-debug.c (debug_qf_find_last_source_symtab): Change result type to "struct compunit_symtab *". All callers updated. (debug_qf_lookup_symbol): Ditto. (debug_qf_find_pc_sect_compunit_symtab): Renamed from debug_qf_find_pc_sect_symtab, change result type to "struct compunit_symtab *". All callers updated. * symfile.c (allocate_symtab): Delete objfile argument. New argument cust. (allocate_compunit_symtab): New function. (add_compunit_symtab_to_objfile): New function. * symfile.h (struct quick_symbol_functions) <lookup_symbol>: Change result type to "struct compunit_symtab *". All uses updated. <find_pc_sect_compunit_symtab>: Renamed from find_pc_sect_symtab. Change result type to "struct compunit_symtab *". All uses updated. * symmisc.c (print_objfile_statistics): Compute blockvector count in separate loop. (dump_symtab_1): Update test for primary source symtab. (maintenance_info_symtabs): Update to handle compunit symtabs. (maintenance_check_symtabs): Ditto. * symtab.c (set_primary_symtab): Delete. (compunit_primary_filetab): New function. (compunit_language): New function. (iterate_over_some_symtabs): Change type of arguments "first", "after_last" to "struct compunit_symtab *". All callers updated. Update to loop over symtabs in each compunit. (error_in_psymtab_expansion): Rename symtab argument to cust, and change type to "struct compunit_symtab *". All callers updated. (find_pc_sect_compunit_symtab): Renamed from find_pc_sect_symtab. Change result type to "struct compunit_symtab *". All callers updated. (find_pc_compunit_symtab): Renamed from find_pc_symtab. Change result type to "struct compunit_symtab *". All callers updated. (find_pc_sect_line): Only loop over symtabs within selected compunit instead of all symtabs in the objfile. * symtab.h (struct symtab) <blockvector>: Moved to compunit_symtab. <compunit_symtab> New member. <block_line_section>: Moved to compunit_symtab. <locations_valid>: Ditto. <epilogue_unwind_valid>: Ditto. <macro_table>: Ditto. <dirname>: Ditto. <debugformat>: Ditto. <producer>: Ditto. <objfile>: Ditto. <call_site_htab>: Ditto. <includes>: Ditto. <user>: Ditto. <primary>: Delete (SYMTAB_COMPUNIT): New macro. (SYMTAB_BLOCKVECTOR): Update definition. (SYMTAB_OBJFILE): Update definition. (SYMTAB_DIRNAME): Update definition. (struct compunit_symtab): New type. Common members among all source symtabs within a compilation unit moved here. All uses updated. (COMPUNIT_OBJFILE): New macro. (COMPUNIT_FILETABS): New macro. (COMPUNIT_DEBUGFORMAT): New macro. (COMPUNIT_PRODUCER): New macro. (COMPUNIT_DIRNAME): New macro. (COMPUNIT_BLOCKVECTOR): New macro. (COMPUNIT_BLOCK_LINE_SECTION): New macro. (COMPUNIT_LOCATIONS_VALID): New macro. (COMPUNIT_EPILOGUE_UNWIND_VALID): New macro. (COMPUNIT_CALL_SITE_HTAB): New macro. (COMPUNIT_MACRO_TABLE): New macro. (ALL_COMPUNIT_FILETABS): New macro. (compunit_symtab_ptr): New typedef. (DEF_VEC_P (compunit_symtab_ptr)): New vector type. gdb/testsuite/ChangeLog: * gdb.base/maint.exp: Update expected output.
2014-11-20[AArch64] Fix mis-detection of unpredictable load/store operations with FP regs.Richard Earnshaw3-11/+25
* config/tc-aarch64.c (warn_unpredictable_ldst): Check that transfer registers are in the GP register set. Adjust warnings. Use correct field member for address register. * testsuite/gas/aarch64/diagnostic.l: Update.
2014-11-20PPC gold doesn't check for overflow properlyAlan Modra4-38/+66
Corrects overflow test for rel14, addr14, rel24, addr24 branch relocs, and prints an information message to give a hint as to how a branch that can't reach a stub might be cured. bfd/ * elf64-ppc.c (group_sections): Init stub14_group_size from --stub-group-size parameter divided by 1024. gold/ * powerpc.cc (Stub_control::Stub_control): Init stub14_group_size_ from --stub-group-size parameter divided by 1024. (Powerpc_relocate_functions::rela, rela_ua): Add fieldsize template parameter. Update all uses. (Target_powerpc::Relocate::relocate): Rename has_plt_value to has_stub_value. Set for long branches. Don't report overflow for branch to undefined weak symbols. Print info message on overflowing branch to stub.
2014-11-20ppc476 workaround sizingAlan Modra2-1/+6
* elf32-ppc.c (ppc_elf_relax_section): Correct ppc476 workaround alignment calculation.
2014-11-20[Ada] XA type is not redundant if the ranges' subtypes do not matchJoel Brobecker2-0/+17
Jan noticed that gdb.ada/arrayidx.exp regressed after I applied the following patch: commit 8908fca5772fcff9f7766158ba2aa59f5a2b1f68 Author: Joel Brobecker <brobecker@adacore.com> Date: Sat Sep 27 09:09:34 2014 -0700 Subject: [Ada] Ignore __XA types when redundant. What happens is that we're trying to print the value of r_two_three, which is defined as follow: type Index is (One, Two, Three); type RTable is array (Index range Two .. Three) of Integer; R_Two_Three : RTable := (2, 3); The expected output is: (gdb) p r_two_three $1 = (two => 2, 3) But after the patch above was applied, with the program program compiled using gcc-gnat-4.9.2-1.fc21.x86_64 (x86_64-linux), the output becomes: (gdb) p r_two_three $1 = (2, 3) (the name of the first bound is missing). The problem comes from the fact that the compiler described the array's index type as a plain base type, instead of as a subrange of the enumerated type. More particularly, this is what gcc-gnat-4.9.2-1.fc21.x86_64 generated: <3><7ce>: Abbrev Number: 9 (DW_TAG_array_type) <7cf> DW_AT_name : (indirect string, offset: 0xc13): p__rtable [...] <7d7> DW_AT_GNAT_descriptive_type: <0x98a> [...] <4><7df>: Abbrev Number: 8 (DW_TAG_subrange_type) <7e0> DW_AT_type : <0xa79> where DIE 0xa79 is: <1><a79>: Abbrev Number: 2 (DW_TAG_base_type) <a7a> DW_AT_byte_size : 8 <a7b> DW_AT_encoding : 7 (unsigned) <a7c> DW_AT_name : (indirect string, offset: 0xfc): sizetype The actual array subrange type can be found in the array's parallel XA type (the DW_AT_GNAT_descriptive_type). The recent commit correctly found that that bounds taken from the descriptive type are the same as bounds of our array's index type. But it failed to notice that ignoring this descriptive type would make us lose the actual array index type, making us think that we're printing an array indexed by integers. I hadn't seen that problem, because the compiler I used produced debugging info where the array's index type is correctly described: <3><79f>: Abbrev Number: 10 (DW_TAG_array_type) <7a0> DW_AT_name : (indirect string, offset: 0xb3d): p__rtable [...] <4><7b0>: Abbrev Number: 8 (DW_TAG_subrange_type) <7b1> DW_AT_type : <0x9b2> <7b5> DW_AT_upper_bound : 2 ... where DIE 0x9b2 leads us to ... <3><9b2>: Abbrev Number: 9 (DW_TAG_subrange_type) [...] <9b8> DW_AT_type : <0x962> <2><962>: Abbrev Number: 22 (DW_TAG_enumeration_type) <963> DW_AT_name : (indirect string, offset: 0xb34): p__index [...] This patch fixes the issue by also making sure that the subtype of the original range type does match the subtype found in the descriptive type. gdb/ChangeLog: * ada-lang.c (ada_is_redundant_range_encoding): Return 0 if the TYPE_CODE of range_type's base type does not match the TYPE_CODE of encoding_type's base type.
2014-11-20Enable to link ARM object file that hasn't attribute section.Terry Guo7-0/+58
bfd/ChangeLog 2014-11-20 Terry Guo <terry.guo@arm.com> * elf32-arm.c (elf32_arm_merge_eabi_attributes): Skip if input bfd hasn't attribute section. ld/testsuite/ChangeLog: 2014-11-20 Terry Guo <terry.guo@arm.com> * ld-arm/attr-merge-nosection-1.d: New file. * ld-arm/attr-merge-nosection-1a.s: Likewise. * ld-arm/attr-merge-nosection-1b.s: Likewise. * ld-arm/arm-elf.exp: Include the new test.
2014-11-20Automatic date update in version.inGDB Administrator1-1/+1
2014-11-20Default powerpc64 to --plt-thread-safe for GoAlan Modra4-0/+12
Go is multi-threaded, so use thread-safe plt stubs. __go_go doesn't actually start threads, but is a convenient libgo function with a reasonably unique name that is called by all Go executables. (Threads are started by a static function of libgo, runtime_newosproc, called by a whole lot of global functions, including runtime_starttheworld and runtime_main.) bfd/ * elf64-ppc.c (ppc64_elf_size_stubs): Add __go_go to thread_starters. gold/ * powerpc.cc (Target_powerpc::do_relax): Add __go_go to thread_starters.
2014-11-19Fix date in ChangeLog entryJan-Benedict Glaw1-1/+1
2014-11-19Fix signedness warningJan-Benedict Glaw2-1/+5
This is the updated version using uintptr_t as Alan Modra suggested. 2014-11-18 Jan-Benedict Glaw <jbglaw@lug-owl.de> * dwarf.c (process_extended_line_op): Fix signedness warning.
2014-11-19[AArch64] Warn on load pair to same registerJiong Wang5-0/+68
2014-11-19 Ryan Mansfield <rmansfield@qnx.com> * config/tc-aarch64.c (md_assemble): Call warn_unpredictable_ldst. (warn_unpredictable_ldst): New. 2014-11-19 Ryan Mansfield <rmansfield@qnx.com> * gas/aarch64/diagnostic.s: Add new warnings test patterns. * gas/aarch64/diagnostic.l: Update expected diagnostic output.
2014-11-19Use 2-byte instead of 4-byte NOP on S390 in 'bp-permanent' test caseAndreas Arnez2-0/+12
The bp-permanent test case assumes that a NOP is exactly as long as a software breakpoint. This is not the case for the S390 "nop" instruction, which is 4 bytes long, while a software breakpoint is just 2 bytes long. The "nopr" instruction has the right size and can be used instead. Without this patch the test case fails on S390 when trying to continue after SIGTRAP on the permanent breakpoint: ... Continuing. Program received signal SIGILL, Illegal instruction. test () at /home/arnez/src/binutils-gdb/gdb/testsuite/gdb.base/bp-permanent.c:40 40 NOP; /* after permanent bp */ (gdb) FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=0: basics: stop at permanent breakpoint With this patch the test case succeeds without any FAILs. gdb/testsuite/ChangeLog: * gdb.base/bp-permanent.c (NOP): Define as 2-byte instead of 4-byte instruction on S390.
2014-11-19[Ada] gdb.ada/complete.exp failure on x86_64-windowsJoel Brobecker2-1/+14
Using the example in gdb.ada/complete.exp, the following command on x86_64-windows returns one unwanted completion choice : (gdb) complete p pck p <pck_E>> [all following completions entries snipped, all expected] I tracked down this suprising entry to a minimal symbol whose name is ".refptr.pck_E". The problem occurs while trying to see if this symbol matches "pck" when doing wild-matching as we are doing here: /* Second: Try wild matching... */ if (!match && wild_match_p) { /* Since we are doing wild matching, this means that TEXT may represent an unqualified symbol name. We therefore must also compare TEXT against the unqualified name of the symbol. */ sym_name = ada_unqualified_name (ada_decode (sym_name)); if (strncmp (sym_name, text, text_len) == 0) match = 1; } What happens is that ada_decode correctly identifies the fact that SYM_NAME (".refptr.pck_E") is not following any GNAT encoding, and therefore returns that same name, but bracketed: "<.refptr.pck_E>". This is the convention we use for telling GDB that the decoded name is not a real Ada name - and therefore should not be encoded for operations such as name matching, symbol lookups, etc. So far, so good. Next is the call to ada_unqualified_name, which unfortunately does not notice that the decoded name it is being given isn't a natural symbol, and just blindly strips everything up to the last do, returning "pck_E>". And of course, "pck_E>" matches "pck" now, and so we end up accepting this symbol as a match. This patch fixes the problem by making ada_unqualified_name a little smarter by making sure that the given decoded symbol name does not start with '<'. gdb/ChangeLog: * ada-lang.c (ada_unqualified_name): Return DECODED_NAME if it starts with '<'. Tested on x86_64-windows using AdaCore's testsuite as well as on x86_64-linux.
2014-11-19[Ada] Ignore __XA types when redundant.Joel Brobecker7-0/+181
Consider the following code which declares a variable A2 which is an array of arrays of integers. type Array2_First is array (24 .. 26) of Integer; type Array2_Second is array (1 .. 2) of Array2_First; A1 : Array1_Second := ((10, 11, 12), (13, 14, 15)); Trying to print the type of that variable currently yields: (gdb) ptype A2 type = array (1 .. 2, 24 .. 26) of integer This is not correct, as this is the description of a two-dimension array, which is different from an array of arrays. The expected output is: (gdb) ptype a2 type = array (1 .. 2) of foo_n926_029.array2_first GDB's struct type currently handles multi-dimension arrays the same way arrays of arrays, where each dimension is stored as a sub-array. The ada-valprint module considers that consecutive array layers are in fact multi-dimension arrays. For array of arrays, a typedef layer is introduced between the two arrays, creating a break between each array type. In our situation, A2 is a described as a typedef of an array type... .uleb128 0x8 # (DIE (0x125) DW_TAG_variable) .ascii "a2\0" # DW_AT_name .long 0xfc # DW_AT_type .uleb128 0x4 # (DIE (0xfc) DW_TAG_typedef) .long .LASF5 # DW_AT_name: "foo__array2_second" .long 0x107 # DW_AT_type .uleb128 0x5 # (DIE (0x107) DW_TAG_array_type) .long .LASF5 # DW_AT_name: "foo__array2_second" .long 0xb4 # DW_AT_type .uleb128 0x6 # (DIE (0x114) DW_TAG_subrange_type) .long 0x11b # DW_AT_type .byte 0x2 # DW_AT_upper_bound .byte 0 # end of children of DIE 0x107 ... whose element type is, as expected, a typedef to the sub-array type: .uleb128 0x4 # (DIE (0xb4) DW_TAG_typedef) .long .LASF4 # DW_AT_name: "foo__array2_first" .long 0xbf # DW_AT_type .uleb128 0x9 # (DIE (0xbf) DW_TAG_array_type) .long .LASF4 # DW_AT_name: "foo__array2_first" .long 0xd8 # DW_AT_GNAT_descriptive_type .long 0x1c5 # DW_AT_type .uleb128 0xa # (DIE (0xd0) DW_TAG_subrange_type) .long 0xf0 # DW_AT_type .byte 0x18 # DW_AT_lower_bound .byte 0x1a # DW_AT_upper_bound .byte 0 # end of children of DIE 0xbf The reason why things fails is that, during expression evaluation, GDB tries to "fix" A1's type. Because the sub-array has a parallel (descriptive) type (DIE 0xd8), GDB thinks that our array's index type must be dynamic and therefore needs to be fixed. This in turn causes the sub-array to be "fixed", which itself results in the typedef layer to be stripped. However, looking closer at the parallel type, we see... .uleb128 0xb # (DIE (0xd8) DW_TAG_structure_type) .long .LASF8 # DW_AT_name: "foo__array2_first___XA" [...] .uleb128 0xc # (DIE (0xe4) DW_TAG_member) .long .LASF10 # DW_AT_name: "foo__Tarray2_firstD1___XDLU_24__26" ... that all it tells us is that the array bounds are 24 and 26, which is already correctly provided by the array's DW_TAG_subrange_type bounds, meaning that this parallel type is just redundant. Parallel types in general are slowly being removed in favor of standard DWARF constructs. But in the meantime, this patch kills two birds with one stone: 1. It recognizes this situation where the XA type is useless, and saves an unnecessary range-type fixing; 2. It fixes the issue at hand because ignoring the XA type results in no type fixing being required, which allows the typedef layer to be preserved. gdb/ChangeLog: * ada-lang.c (ada_is_redundant_range_encoding): New function. (ada_is_redundant_index_type_desc): New function. (to_fixed_array_type): Ignore parallel XA type if redundant. gdb/testsuite/ChangeLog: * gdb.ada/arr_arr: New testcase. Tested on x86_64-linux.
2014-11-19varsize-limit error printing element of packed array...Joel Brobecker7-2/+145
... when that packed array is part of a discriminated record and one of the bounds is a discriminant. Consider the following code: type FUNNY_CHAR_T is (NUL, ' ', '"', '#', [etc]); type FUNNY_STR_T is array (POSITIVE range <>) of FUNNY_CHAR_T; pragma PACK (FUNNY_STR_T); type FUNNY_STRING_T (SIZE : NATURAL := 1) is record STR : FUNNY_STR_T (1 .. SIZE) := (others => '0'); LENGTH : NATURAL := 4; end record; TEST: FUNNY_STRING_T(100); GDB is able to print the value of variable "test" and "test.str". But not "test.str(1)": (gdb) p test $1 = (size => 100, str => (33 'A', nul <repeats 99 times>), length => 1) (gdb) p test.str $2 = (33 'A', nul <repeats 99 times>) (gdb) p test.str(1) object size is larger than varsize-limit The problem occurs during the phase where we are trying to resolve the expression subscript operation. On the one hand of the subscript operator, we have the result of the evaluation of "test.str", which is our packed array. We have the following code to handle packed arrays in particular: if (ada_is_constrained_packed_array_type (desc_base_type (value_type (argvec[0])))) argvec[0] = ada_coerce_to_simple_array (argvec[0]); This eventually leads to a call to constrained_packed_array_type to return the "simple array". This function relies on a parallel ___XA type, when available, to determine the bounds. In our case, we find type... failure__funny_string_t__T4b___XA" ... which has one field describing the bounds of our array as: failure__funny_string_t__T3b___XDLU_1__size The part that interests us is after the ___XD suffix or, in other words: "LU_1__size". What this means in GNAT encoding parlance is that the lower bound is 1, and that the upper bound is the value of "size". "size" is our discriminant in this case. Normally, we would access the record's discriminant in order to get the upper bound's value, but we do not have that information, here. We are in a mode where we are just trying to "fix" the type without an actual value. This is what the call to to_fixed_range_type is doing, and because the fix'ing fails, it ends up returning the ___XDLU type unmodified as our index type. This shouldn't be a problem, except that the later part of constrained_packed_array_type then uses that index_type to determine the array size, via a call to get_discrete_bounds. The problem is that the upper bound of the ___XDLU type is dynamic (in the DWARF sense) while get_discrete_bounds implicitly assumes that the bounds are static, and therefore accesses them using macros that assume the bounds values are constants: case TYPE_CODE_RANGE: *lowp = TYPE_LOW_BOUND (type); *highp = TYPE_HIGH_BOUND (type); This therefore returns a bogus value for the upper bound, leading to an unexpectedly large size for our array, which later triggers the varsize-limit guard we've seen above. This patch avoids the problem by adding special handling of dynamic range types. It also extends the documentation of the constrained_packed_array_type function to document what happens in this situation. gdb/ChangeLog: * ada-lang.c (constrained_packed_array_type): Set the length of the return array as if both bounds where zero if that returned array's index type is dynamic. gdb/testsuite/ChangeLog: * gdb.ada/pkd_arr_elem: New Testcase. Tested on x86_64-linux.
2014-11-19Don't set CC in config/i386/go32.mhYao Qi2-1/+4
I cross-compile gdb for msdosdjgpp (both target and host is i586-pc-msdosdjgpp), so the CC should be i586-pc-msdosdjgpp-gcc. However, CC is set incorrectly to gcc after config/i386/go32.mh is inlined into the Makefile. This patch is to remove the CC setting in config/i386/go32.mh. gdb: 2014-11-19 Yao Qi <yao@codesourcery.com> * config/i386/go32.mh (CC): Remove.
2014-11-19Automatic date update in version.inGDB Administrator1-1/+1
2014-11-18Check PC-relative offset overflow in PLT entryH.J. Lu6-8/+62
This patch checks PC-relative offset overflow in pushq instruction in x86-64 PLT entry. bfd/ PR ld/17618 * elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Check PC-relative offset overflow in PLT entry. ld/testsuite/ PR ld/17618 * ld-x86-64/x86-64.exp: Run pr17618 for Linux target. * ld-x86-64/pr17618.d: New file. * ld-x86-64/pr17618.s: Likewise.
2014-11-18symtab.h (SYMTAB_BLOCKVECTOR): Renamed from BLOCKVECTOR. All uses updated.Doug Evans22-62/+76
gdb/ChangeLog: * symtab.h (SYMTAB_BLOCKVECTOR): Renamed from BLOCKVECTOR. All uses updated.
2014-11-18buildsym API cleanupDoug Evans8-126/+145
gdb/ChangeLog: * buildsym.c (buildsym_objfile): New static global. (buildsym_comp_dir): New static global. (finish_block_internal): Delete arg objfile. All callers updated. (finish_block): Delete arg objfile. All callers updated. (start_subfile): Delete arg dirname. All callers updated. (patch_subfile_names): Update buildsym_comp_dir. (get_macro_table): Delete arg objfile. All callers updated. (start_symtab): New arg objfile. All callers updated. Rename arg dirname to comp_dir. (reset_symtab_globals): Initialize buildsym_objfile, buildsym_comp_dir. (end_symtab_get_static_block): Delete arg objfile. All callers updated. (end_symtab_without_blockvector): Ditto. (end_symtab_with_blockvector): Ditto. (end_symtab_from_static_block): Ditto. (end_symtab): Ditto. (end_expandable_symtab): Ditto. (augment_type_symtab): Ditto. * coffread.c (coff_start_symtab): New arg objfile. All callers updated.
2014-11-18Fixes a seg-fault when displaying the time data for a corrupt archive.Nick Clifton2-2/+11
PR binutuls/17605 * bucomm.c (print_arelt_descr): Check for ctime returning NULL.
2014-11-18symtab.h (SYMTAB_LINETABLE): Renamed from LINETABLE. All uses updated.Doug Evans11-44/+56
gdb/ChangeLog: * symtab.h (SYMTAB_LINETABLE): Renamed from LINETABLE. All uses updated.
2014-11-18SYMTAB_DIRNAME: New macro.Doug Evans7-17/+28
gdb/ChangeLog: * symtab.h (SYMTAB_DIRNAME): New macro. All uses of member symtab.dirname updated to use it.
2014-11-18SYMTAB_OBJFILE: New macro.Doug Evans19-43/+52
gdb/ChangeLog: * symtab.h (SYMTAB_OBJFILE): New macro. All uses of member symtab.objfile updated to use it.
2014-11-18Fix memory leak in watch_main_source_file_lossage.Doug Evans2-0/+6
gdb/ChangeLog: * buildsym.c (watch_main_source_file_lossage): Fix memory leak.
2014-11-18Use SYMBOL_OBJFILE more.Doug Evans11-14/+29
gdb/ChangeLog: * cp-namespace.c (cp_lookup_symbol_imports_or_template): Use SYMBOL_OBJFILE. * findvar.c (default_read_var_value): Ditto. * jv-lang.c (add_class_symtab_symbol): Ditto. * parse.c (operator_check_standard): Ditto. * printcmd.c (address_info): Ditto. * symtab.c (fixup_symbol_section): Ditto. (skip_prologue_sal): Ditto. * tracepoint.c (scope_info): Ditto. * valops.c (find_function_in_inferior): Ditto. * guile/scm-symbol.c (syscm_eq_symbol_smob): Ditto. * python/py-symbol.c (set_symbol): Ditto.
2014-11-18Split up end_symtab_from_static_block into two.Doug Evans2-193/+229
This patch is conceptually quite simple. If you look at end_symtab_from_static_block you'll see that the static_block == NULL case is completely different than the non-NULL case. There's a lot of complexity to handle the NULL case but it seems entirely unnecessary. For example, whether blockvector is NULL is decided at the start, before this for loop: for (subfile = subfiles; subfile; subfile = nextsub) Secondly, after the for loop, we test symtab for non-NULL here: /* Set this for the main source file. */ if (symtab) but symtab will only ever be non-NULL if blockvector was non-NULL. And if blockvector was non_NULL so will symtab. The other case to consider is these lines of code executed before the for loop: /* Read the line table if it has to be read separately. This is only used by xcoffread.c. */ if (objfile->sf->sym_read_linetable != NULL) objfile->sf->sym_read_linetable (objfile); /* Handle the case where the debug info specifies a different path for the main source file. It can cause us to lose track of its line number information. */ watch_main_source_file_lossage (); From my reading of the code, neither of these is useful in the static_block == NULL case. Thus we can make the code more readable by splitting these two cases up, which is what this patch does. gdb/ChangeLog: * buildsym.c (main_subfile): New static global. (free_subfiles_list): New function. (start_symtab): Set main_subfile. (restart_symtab): Replace init of subfiles, current_subfile with call to free_subfiles_list. (watch_main_source_file_lossage): Use main_subfile. (reset_symtab_globals): Replace init of current_subfile with call to free_subfiles_list. (end_symtab_without_blockvector, end_symtab_with_blockvector): New functions, split out from ... (end_symtab_from_static_block): ... here. Rewrite to call them.
generated by cgit v1.1 at 2025-09-23 12:16:59 +0000