| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In this commit:
commit b080fe54fb3414b488b8ef323c6c50def061f918
Date: Tue Nov 8 12:32:51 2022 +0000
gdb: add inferior-specific breakpoints
limited support was added in lib/mi-support.exp to help with testing
of inferior specific breakpoints.
Though the changes that were added were not wrong, while working on a
later patch, I realised that I had added the support in the wrong
place -- I only added support to mi_make_breakpoint_multi, when really
I should have added the support to mi_make_breakpoint_1, which is used
by all of the MI procs that create breakpoints.
This commit moves the support to mi_make_breakpoint_1, and updates all
the procs that use mi_make_breakpoint_1 to accept, and then pass
through, and (optional) inferior argument. This will make it much
easier to write MI tests for inferior specific breakpoints.
There's no change in what is tested after this commit.
|
|
The commit:
commit b080fe54fb3414b488b8ef323c6c50def061f918
Date: Tue Nov 8 12:32:51 2022 +0000
gdb: add inferior-specific breakpoints
introduced a bug in the function breakpoint_set_inferior. The above
commit includes this line:
gdb::observers::breakpoint_modified.notify (b);
when it should have instead used this line:
notify_breakpoint_modified (b);
The change to use notify_breakpoint_modified was introduced to GDB
after commit b080fe54fb34 was written, but before it was merged, and I
failed to update this part of the code during the rebase.
The consequence of this error is that the MI interpreter will not emit
breakpoint-modified notifications when breakpoint_set_inferior is
called.
In this commit I update the code to call notify_breakpoint_modified,
and add a test that checks the MI events are being emitted correctly
in this case.
|
|
bfd/
* Makefile.am: Move elf32-kvx.lo from BFD32_BACKENDS to
BFD64_BACKENDS. Remove elfxx-kvx.lo from BFD32_BACKENDS.
Remove elfxx-kvx.c from BFD32_BACKENDS_CFILES.
* Makefile.in: Regenerate.
* config.bfd: Adjust targ_defvec and targ_selvecs and gate them
behind BFD64.
* configure.ac: Add target_size=64 to kvx_elf64_*vec.
* configure: Regenerate.
* elfnn-kvx.c (elfNN_kvx_stub_name): Cast rel->r_addend to
uint64_t to match format string.
(elfNN_kvx_relocate_section): Similarly for r_offset, and
use PRIx64 in format string.
* targets.c (_bfd_target_vector <kvx_elf32_vec>): Move inside
#ifdef BFD64.
ld/
* Makefile.am: Move eelf32kvx.c from ALL_EMULATION_SOURCES to
ALL_64_EMULATION_SOURCES.
* Makefile.in: Regenerate.
|
|
O_pseudo_fixup was defined as O_max+1, missing the fact that O_md1
through O_md32 enums are for use by target code. Worse, kvx-parse.c
used 64 rather than O_pseudo_fixup. Fix this, and wrap some overlong
lines.
* config/tc-kvx.h (O_pseudo_fixup): Define.
* config/tc-kvx.c (O_pseudo_fixup): Don't define here.
(insert_operand): Delete bogus comment and cast.
* config/kvx-parse.c (promote_token): Use O_pseudo_fixup
rather than hardcoded value. Wrap overlong lines.
(get_token_class): Likewise.
(parse_with_restarts): Wrap overlong line.
|
|
This fixes a few places where ubsan complains about signed integer
overflow when running the testsuite, and that clz(0) is undefined.
When fixing the clz problem, I also noticed that we'd get complaints
if pval is ever LLONG_MIN. Fix that by using unsigned arithmetic.
* config/kvx-parse.c (get_token_class): Avoid signed overflow.
Don't clz(0).
* config/tc-kvx.c (PARALLEL_BIT): Avoid signed overflow.
|
|
kvx-parse.c:parse_with_restarts does
if (!tok.insn[tok.begin])
tok.class_id = -3;
then a little later
printf_debug (1, "\nEntering rule: %d (Trying to match: (%s)[%d])\n", jump_target,
TOKEN_NAME (CLASS_ID (tok)), CLASS_ID (tok));
This results in a buffer overrun in TOKEN_NAME. Fix that.
* config/tc-kvx.h (TOKEN_NAME): Check for tok <= 0, not just -1.
|
|
It is generally a good idea to avoid signed arithmetic on values
extracted from object files, to avoid ubsan warnings on overflow.
This patch replaces some uses of bfd_signed_vma in the kvx backend
with bfd_vma, and removes _bfd_kvx_elf_resolve_relocation, a
do-nothing function. In the process of making this patch I noticed
some dead code in the GOT entry handling, setting value to
got_entry_addr but using "off" in the _bfd_final_link_relocate call.
Since kvx_calculate_got_entry_vma also returns the GOT offset, I
presume the code is correct, but I've left the dead code and comment
there.
* elfxx-kvx.h (_bfd_kvx_elf_resolve_relocation): Delete.
* elfxx-kvx.c (kvx_signed_overflow): Rewrite using unsigned
arithmetic.
(_bfd_kvx_elf_resolve_relocation): Delete.
* elfnn-kvx.c (kvx_relocate): Update for
_bfd_kvx_elf_resolve_relocation removal.
(elfNN_kvx_final_link_relocate): Likewise. Don't use a signed
addend.
|
|
Indentation, whitespace and comment fixes.
* elfnn-kvx.c: Formatting.
* elfxx-kvx.c: Formatting.
(elfNN_kvx_final_link_relocate): Correct GOT entry comment.
|
|
Some places matching the first char of a string against
bfd_get_symbol_leading_char, which may be zero, didn't check for "".
This could lead to accesses past the end of the string and potential
buffer overruns. Fix that, and also get rid of a stupid optimisation
in dbxread when looking for "__DYNAMIC" that also might access past
the end of a string.
|
|
Some places matching the first char of a string against
bfd_get_symbol_leading_char, which may be zero, didn't check for the
string being "". This patch adds the check to stop accesses past the
end of the string and potential buffer overruns.
The dlltool one was found by oss-fuzz quite a while ago.
bfd/
* cofflink.c (_bfd_coff_link_input_bfd): Ensure a zero
bfd_get_symbol_leading_char doesn't lead to accessing past the
zero string terminator.
* linker.c (bfd_wrapped_link_hash_lookup): Likewise.
(unwrap_hash_lookup): Likewise.
binutils/
* dlltool.c (scan_filtered_symbols): Ensure a zero
bfd_get_symbol_leading_char doesn't lead to accessing past the
zero string terminator.
|
|
|
|
When building gdb with -flto -O2, I run into:
...
opcodes/mep-desc.h:250:14: warning: type 'cgen_operand_type' violates the \
C++ One Definition Rule [-Wodr]
typedef enum cgen_operand_type {
^
opcodes/or1k-desc.h:624:14: note: an enum with different value name is \
defined in another translation unit
typedef enum cgen_operand_type {
^
opcodes/mep-desc.h:212:14: warning: type 'cgen_hw_type' violates the C++ One \
Definition Rule [-Wodr]
typedef enum cgen_hw_type {
^
opcodes/or1k-desc.h:433:14: note: an enum with different value name is \
defined in another translation unit
typedef enum cgen_hw_type {
^
...
Fix this by making the conflicting type names unique, adding a target-specific
prefix using a define before the include:
...
#define cgen_operand_type <target-name>_cgen_operand_type
#define cgen_hw_type <target-name>_cgen_hw_type
#include "opcodes/<target-name>-desc.h"
...
and move those defines into a new file cgen-remap.h, similar to how that's
done for yacc in yy-remap.h.
Likewise for targets frv and lm32, the two other targets that include
opcodes/<target-name>-desc.h.
Likewise for more cgen symbols that I got the same warning for when using
-flto-partition=one.
A PR has been filed to take care of this in the opcodes dir instead (PR30758).
Tested on x86_64-linux.
Approved-By: Tom Tromey <tom@tromey.com>
PR build/30757
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30757
|
|
I noticed a call to value::copy in gdbpy_get_varobj_pretty_printer,
and I couldn't figure out why it was there. I think maybe it came
from the time when value_to_value_object would release values from the
value chain -- but that was removed in commit f3d3bbbc.
This patch removes this call. Regression tested on x86-64 Fedora 36.
|
|
Historically, flags and variables relating to architectural revisions
for the A-profile architecture omitted the trailing `A' such that, for
example, assembling for `-march=armv8.4-a' set the `AARCH64_ARCH_V8_4'
flag in the assembler.
This leads to some ambiguity, since Binutils also targets the
R-profile Arm architecture. Therefore, it seems prudent to have
everything associated with the A-profile cores end in `A' and likewise
`R' for the R-profile. Referring back to the example above, the flag
set for `-march=armv8.4-a' is better characterized if labeled
`AARCH64_ARCH_V8_4A'.
The only exception to the rule of appending `A' to variables is found
in the handling of the `AARCH64_FEATURE_V8' macro, as it is the
baseline from which ALL processors derive and should therefore be left
unchanged.
In reflecting the `ARM' architectural nomenclature choices, where we
have `ARM_ARCH_V8A' and `ARM_ARCH_V8R', the choice is made to not have
an underscore separating the numerical revision number and the
A/R-profile indicator suffix. This has meant that renaming of
R-profile related flags and variables was warranted, thus going from
`.*_[vV]8_[rR]' to `.*_[vV]8[rR]'.
Finally, this is more in line with conventions within GCC and adds consistency
across the toolchain.
gas/ChangeLog:
* gas/config/tc-aarch64.c:
(aarch64_cpus): Reference to arch feature macros updated.
(aarch64_archs): Likewise.
include/ChangeLog:
* include/opcode/aarch64.h:
(AARCH64_FEATURE_V8A): Updated name: V8_A -> V8A.
(AARCH64_FEATURE_V8_1A): A-suffix added.
(AARCH64_FEATURE_V8_2A): Likewise.
(AARCH64_FEATURE_V8_3A): Likewise.
(AARCH64_FEATURE_V8_4A): Likewise.
(AARCH64_FEATURE_V8_5A): Likewise.
(AARCH64_FEATURE_V8_6A): Likewise.
(AARCH64_FEATURE_V8_7A): Likewise.
(AARCH64_FEATURE_V8_8A):Likewise.
(AARCH64_FEATURE_V9A): Likewise.
(AARCH64_FEATURE_V8R): Updated name: V8_R -> V8R.
(AARCH64_ARCH_V8A_FEATURES): Updated name: V8_A -> V8A.
(AARCH64_ARCH_V8_1A_FEATURES): A-suffix added.
(AARCH64_ARCH_V8_2A_FEATURES): Likewise.
(AARCH64_ARCH_V8_3A_FEATURES): Likewise.
(AARCH64_ARCH_V8_4A_FEATURES): Likewise.
(AARCH64_ARCH_V8_5A_FEATURES): Likewise.
(AARCH64_ARCH_V8_6A_FEATURES): Likewise.
(AARCH64_ARCH_V8_7A_FEATURES): Likewise.
(AARCH64_ARCH_V8_8A_FEATURES): Likewise.
(AARCH64_ARCH_V9A_FEATURES): Likewise.
(AARCH64_ARCH_V9_1A_FEATURES): Likewise.
(AARCH64_ARCH_V9_2A_FEATURES): Likewise.
(AARCH64_ARCH_V9_3A_FEATURES): Likewise.
(AARCH64_ARCH_V8A): Updated name: V8_A -> V8A.
(AARCH64_ARCH_V8_1A): A-suffix added.
(AARCH64_ARCH_V8_2A): Likewise.
(AARCH64_ARCH_V8_3A): Likewise.
(AARCH64_ARCH_V8_4A): Likewise.
(AARCH64_ARCH_V8_5A): Likewise.
(AARCH64_ARCH_V8_6A): Likewise.
(AARCH64_ARCH_V8_7A): Likewise.
(AARCH64_ARCH_V8_8A): Likewise.
(AARCH64_ARCH_V9A): Likewise.
(AARCH64_ARCH_V9_1A): Likewise.
(AARCH64_ARCH_V9_2A): Likewise.
(AARCH64_ARCH_V9_3A): Likewise.
(AARCH64_ARCH_V8_R): Updated name: V8_R -> V8R.
opcodes/ChangeLog:
* opcodes/aarch64-opc.c (SR_V8A): Updated name: V8_A -> V8A.
(SR_V8_1A): A-suffix added.
(SR_V8_2A): Likewise.
(SR_V8_3A): Likewise.
(SR_V8_4A): Likewise.
(SR_V8_6A): Likewise.
(SR_V8_7A): Likewise.
(SR_V8_8A): Likewise.
(aarch64_sys_regs): Reference to arch feature macros updated.
(aarch64_pstatefields): Reference to arch feature macros updated.
(aarch64_sys_ins_reg_supported_p): Reference to arch feature macros
updated.
* opcodes/aarch64-tbl.h:
(aarch64_feature_v8_2a): a-suffix added.
(aarch64_feature_v8_3a): Likewise.
(aarch64_feature_fp_v8_3a): Likewise.
(aarch64_feature_v8_4a): Likewise.
(aarch64_feature_fp_16_v8_2a): Likewise.
(aarch64_feature_v8_5a): Likewise.
(aarch64_feature_v8_6a): Likewise.
(aarch64_feature_v8_7a): Likewise.
(aarch64_feature_v8r): Updated name: v8_r-> v8r.
(ARMV8R): Updated name: V8_R-> V8R.
(ARMV8_2A): A-suffix added.
(ARMV8_3A): Likewise.
(FP_V8_3A): Likewise.
(ARMV8_4A): Likewise.
(FP_F16_V8_2A): Likewise.
(ARMV8_5): Likewise.
(ARMV8_6A): Likewise.
(ARMV8_6A_SVE): Likewise.
(ARMV8_7A): Likewise.
(V8_2A_INSN): `A' added to macro symbol.
(V8_3A_INSN): Likewise.
(V8_4A_INSN): Likewise.
(FP16_V8_2A_INSN): Likewise.
(V8_5A_INSN): Likewise.
(V8_6A_INSN): Likewise.
(V8_7A_INSN): Likewise.
(V8R_INSN): Updated name: V8_R-> V8R.
|
|
Fuzzers have found that objdump -W takes a really long time if
the entry count uleb is ridiculously large, and format attributes
don't consume data (which doesn't make sense for a table of names).
* dwarf.c (display_formatted_table): Sanity check count of
table entries.
|
|
kvx_dis_init currently always returns true, but error conditions do so
by "return -1" which converts to true. The return status is ignored
anyway, and it doesn't make much sense to error on unexpected arch or
mach: If print_insn_kvx is called then the atch is known to be kvx,
and it's better to choose some default for a user passing an unknown
mach value rather than segfaulting in decode_insn when env.opc_table
is NULL.
I've chosen the default mach to be bfd_mach_kv3_1, the default in
bfd/cpu-kvx.c, not that it matters very much. In normal objdump/gdb
usage, info->mach won't be an unexpected value.
* kvx-dis.c (kvx_dis_init): Return void. Don't error on
unexpected arch or mach. Default to bfd_mach_kv3_1 for
unknown mach. Don't clear info->disassembler_options.
|
|
A misplaced line, resulting in testsuite errors when attempting to use
as -m32.
* config.bfd (kvx-*-linux*): Add targ_selvecs.
(kvx-*-*): Remove targ_selvecs.
|
|
Add files submitted on the mailing list but somehow not committed.
|
|
|
|
The BPF virtual machine does not support neg instructions operating on
immediates, and these erroneous instructions were recently removed from
gas. Remove them from the simulator as well.
|
|
The neg/neg32 BPF instructions always use BPF_SRC_K (=0) in their header
source bit, despite operating on registers. If BPF_SRC_X (=1) is set,
the instructions are rejected by the kernel.
Because of this there are also no neg/neg32 instructions which operate
on immediates, so remove them.
bd434cc4d94ec3d2f9fc1e7c00c27b074f962bc1 was a similar fix in the old
CGEN-based port, but was not carried forward in the new port.
include/
* opcode/bpf.h (enum bpf_insn_id): Remove spurious entries
BPF_INSN_NEGI and BPF_INSN_NEG32I.
opcodes/
* bpf-opc.c (bpf_opcodes): Remove erroneous NEGI and NEG32I
instructions.
gas/
* doc/c-bpf.texi (BPF Instructions): Remove erroneous neg and
neg32 instructions operating on immediates.
* testsuite/gas/bpf/alu.s: Adapt accordingly.
* testsuite/gas/bpf/alu.d: Likewise.
* testsuite/gas/bpf/alu-be.d: Likewise
* testsuite/gas/bpf/alu32.s: Likewise.
* testsuite/gas/bpf/alu32.d: Likewise.
* testsuite/gas/bpf/alu32-be.d: Likewise.
* testsuite/gas/bpf/alu-pseudoc.s: Likewise.
* testsuite/gas/bpf/alu-pseudoc.d: Likewise.
* testsuite/gas/bpf/alu-be-pseudoc.d: Likewise.
* testsuite/gas/bpf/alu32-pseudoc.s: Likewise.
* testsuite/gas/bpf/alu32-pseudoc.d: Likewise.
* testsuite/gas/bpf/alu32-be-pseudoc.d: Likewise.
|
|
The Scalable Matrix Extension v2 (SME2) defines a new register, ZT0, that
the Linux Kernel handles through a new NT_ARM_ZT register set.
Teach binutils/BFD about it so that gdb can make use of it for reading
and writing core files. This also enables readelf/objdump to show the
correct identification for the NT_ARM_ZT register set.
Validated under Fast Models.
|
|
Add required code to support core file dumps with NT_ARM_ZA and NT_ARM_SSVE
register sets in them.
These new register sets are dumped when SME is supported.
|
|
bfd_close ought to always call iovec->bclose so that cache_bclose is
called. If not, bfd_last_cache will be left pointing at freed memory.
This bug was found by oss-fuzz with the trigger being an old bug in
the ia64-vms support. Given a file of the "wrong" size,
elf64_vms_close_and_cleanup attempted to extend it, leading to an
error since the file was opened read-only by nm. nm bad_file bad_file
then hit the use-after-free when opening the second file.
commit 8219cab3f8 fixed multiple bugs of this type in bfd_close and
bfd_close_all_done, but didn't go quite far enough.
* elf64-ia64-vms.c (elf64_vms_close_and_cleanup): Don't
attempt to extend read-only files.
* opncls.c (bfd_close_all_done): Always call _close_and_cleanup.
An old bug in the ia64-vms support can be used to tickle another bug
in bfd_close_all_done. If _close_and_cleanup returns an error,
|
|
|
|
|
|
|
|
I get a couple of -Wmissing-declarations errors when building the sim.
This happens because an earlier patch added the declarations to a
cgen-generated header, but the recent re-generation then removed them.
This patch fixes the build by adding declarations just before the
definition. This is normally not best practice, but in this
particular situation it at leat un-breaks the build.
|
|
I saw this warning from make:
Makefile:5043: *** mixed implicit and normal rules: deprecated syntax
I believe this snuck in by error with the recent cgen-related changes.
This patch removes the stray '%' and rebuilds the Makefile.in. I'm
checking this in.
|
|
This regenerates sim files.
Tested with the following tools from a recent binutils build in
sim-site-config.exp, plus a few cross compilers.
set AS_FOR_TARGET_AARCH64 "/home/alan/build/gas/aarch64-linux-gnu/gas/as-new"
set LD_FOR_TARGET_AARCH64 "/home/alan/build/gas/aarch64-linux-gnu/ld/ld-new"
set CC_FOR_TARGET_AARCH64 "aarch64-linux-gnu-gcc"
set AS_FOR_TARGET_ARM "/home/alan/build/gas/arm-linux-gnueabi/gas/as-new"
set LD_FOR_TARGET_ARM "/home/alan/build/gas/arm-linux-gnueabi/ld/ld-new"
set CC_FOR_TARGET_ARM "arm-linux-gnueabi-gcc"
set AS_FOR_TARGET_AVR "/home/alan/build/gas/avr-elf/gas/as-new"
set LD_FOR_TARGET_AVR "/home/alan/build/gas/avr-elf/ld/ld-new"
set CC_FOR_TARGET_AVR ""
set AS_FOR_TARGET_BFIN "/home/alan/build/gas/bfin-elf/gas/as-new"
set LD_FOR_TARGET_BFIN "/home/alan/build/gas/bfin-elf/ld/ld-new"
set CC_FOR_TARGET_BFIN ""
set AS_FOR_TARGET_BPF "/home/alan/build/gas/bpf-none/gas/as-new"
set LD_FOR_TARGET_BPF "/home/alan/build/gas/bpf-none/ld/ld-new"
set CC_FOR_TARGET_BPF ""
set AS_FOR_TARGET_CR16 "/home/alan/build/gas/cr16-elf/gas/as-new"
set LD_FOR_TARGET_CR16 "/home/alan/build/gas/cr16-elf/ld/ld-new"
set CC_FOR_TARGET_CR16 ""
set AS_FOR_TARGET_CRIS "/home/alan/build/gas/cris-elf/gas/as-new"
set LD_FOR_TARGET_CRIS "/home/alan/build/gas/cris-elf/ld/ld-new"
set CC_FOR_TARGET_CRIS ""
set AS_FOR_TARGET_D10V "/home/alan/build/gas/d10v-elf/gas/as-new"
set LD_FOR_TARGET_D10V "/home/alan/build/gas/d10v-elf/ld/ld-new"
set CC_FOR_TARGET_D10V ""
set AS_FOR_TARGET_FRV "/home/alan/build/gas/frv-elf/gas/as-new"
set LD_FOR_TARGET_FRV "/home/alan/build/gas/frv-elf/ld/ld-new"
set CC_FOR_TARGET_FRV ""
set AS_FOR_TARGET_FT32 "/home/alan/build/gas/ft32-elf/gas/as-new"
set LD_FOR_TARGET_FT32 "/home/alan/build/gas/ft32-elf/ld/ld-new"
set CC_FOR_TARGET_FT32 ""
set AS_FOR_TARGET_H8300 "/home/alan/build/gas/h8300-elf/gas/as-new"
set LD_FOR_TARGET_H8300 "/home/alan/build/gas/h8300-elf/ld/ld-new"
set CC_FOR_TARGET_H8300 ""
set AS_FOR_TARGET_IQ2000 "/home/alan/build/gas/iq2000-elf/gas/as-new"
set LD_FOR_TARGET_IQ2000 "/home/alan/build/gas/iq2000-elf/ld/ld-new"
set CC_FOR_TARGET_IQ2000 ""
set AS_FOR_TARGET_LM32 "/home/alan/build/gas/lm32-linux-gnu/gas/as-new"
set LD_FOR_TARGET_LM32 "/home/alan/build/gas/lm32-linux-gnu/ld/ld-new"
set CC_FOR_TARGET_LM32 ""
set AS_FOR_TARGET_M32C "/home/alan/build/gas/m32c-elf/gas/as-new"
set LD_FOR_TARGET_M32C "/home/alan/build/gas/m32c-elf/ld/ld-new"
set CC_FOR_TARGET_M32C ""
set AS_FOR_TARGET_M32R "/home/alan/build/gas/m32r-elf/gas/as-new"
set LD_FOR_TARGET_M32R "/home/alan/build/gas/m32r-elf/ld/ld-new"
set CC_FOR_TARGET_M32R ""
set AS_FOR_TARGET_M68HC11 "/home/alan/build/gas/m68hc11-elf/gas/as-new"
set LD_FOR_TARGET_M68HC11 "/home/alan/build/gas/m68hc11-elf/ld/ld-new"
set CC_FOR_TARGET_M68HC11 ""
set AS_FOR_TARGET_MCORE "/home/alan/build/gas/mcore-elf/gas/as-new"
set LD_FOR_TARGET_MCORE "/home/alan/build/gas/mcore-elf/ld/ld-new"
set CC_FOR_TARGET_MCORE ""
set AS_FOR_TARGET_MICROBLAZE "/home/alan/build/gas/microblaze-linux-gnu/gas/as-new"
set LD_FOR_TARGET_MICROBLAZE "/home/alan/build/gas/microblaze-linux-gnu/ld/ld-new"
set CC_FOR_TARGET_MICROBLAZE "microblaze-linux-gnu-gcc"
set AS_FOR_TARGET_MIPS "/home/alan/build/gas/mips-linux-gnu/gas/as-new"
set LD_FOR_TARGET_MIPS "/home/alan/build/gas/mips-linux-gnu/ld/ld-new"
set CC_FOR_TARGET_MIPS "mips-linux-gnu-gcc"
set AS_FOR_TARGET_MN10300 "/home/alan/build/gas/mn10300-elf/gas/as-new"
set LD_FOR_TARGET_MN10300 "/home/alan/build/gas/mn10300-elf/ld/ld-new"
set CC_FOR_TARGET_MN10300 ""
set AS_FOR_TARGET_MOXIE "/home/alan/build/gas/moxie-elf/gas/as-new"
set LD_FOR_TARGET_MOXIE "/home/alan/build/gas/moxie-elf/ld/ld-new"
set CC_FOR_TARGET_MOXIE ""
set AS_FOR_TARGET_MSP430 "/home/alan/build/gas/msp430-elf/gas/as-new"
set LD_FOR_TARGET_MSP430 "/home/alan/build/gas/msp430-elf/ld/ld-new"
set CC_FOR_TARGET_MSP430 ""
set AS_FOR_TARGET_OR1K "/home/alan/build/gas/or1k-linux-gnu/gas/as-new"
set LD_FOR_TARGET_OR1K "/home/alan/build/gas/or1k-linux-gnu/ld/ld-new"
set CC_FOR_TARGET_OR1K ""
set AS_FOR_TARGET_PPC "/home/alan/build/gas/powerpc-linux-gnu/gas/as-new"
set LD_FOR_TARGET_PPC "/home/alan/build/gas/powerpc-linux-gnu/ld/ld-new"
set CC_FOR_TARGET_PPC "powerpc-linux-gnu-gcc"
set AS_FOR_TARGET_PRU "/home/alan/build/gas/pru-elf/gas/as-new"
set LD_FOR_TARGET_PRU "/home/alan/build/gas/pru-elf/ld/ld-new"
set CC_FOR_TARGET_PRU ""
set AS_FOR_TARGET_RISCV "/home/alan/build/gas/riscv32-elf/gas/as-new"
set LD_FOR_TARGET_RISCV "/home/alan/build/gas/riscv32-elf/ld/ld-new"
set CC_FOR_TARGET_RISCV ""
set AS_FOR_TARGET_RL78 "/home/alan/build/gas/rl78-elf/gas/as-new"
set LD_FOR_TARGET_RL78 "/home/alan/build/gas/rl78-elf/ld/ld-new"
set CC_FOR_TARGET_RL78 ""
set AS_FOR_TARGET_RX "/home/alan/build/gas/rx-elf/gas/as-new"
set LD_FOR_TARGET_RX "/home/alan/build/gas/rx-elf/ld/ld-new"
set CC_FOR_TARGET_RX ""
set AS_FOR_TARGET_SH "/home/alan/build/gas/sh-rtems/gas/as-new"
set LD_FOR_TARGET_SH "/home/alan/build/gas/sh-rtems/ld/ld-new"
set CC_FOR_TARGET_SH ""
set AS_FOR_TARGET_ERC32 ""
set LD_FOR_TARGET_ERC32 ""
set CC_FOR_TARGET_ERC32 ""
set AS_FOR_TARGET_V850 "/home/alan/build/gas/v850-elf/gas/as-new"
set LD_FOR_TARGET_V850 "/home/alan/build/gas/v850-elf/ld/ld-new"
set CC_FOR_TARGET_V850 ""
Results both before and after were:
FAIL: crisv10 mem1.ms (execution)
FAIL: crisv10 mem2.ms (execution)
FAIL: crisv32 mem1.ms (execution)
FAIL: crisv32 mem2.ms (execution)
FAIL: microblaze fail.s (execution)
FAIL: microblaze pass.s (execution)
expected passes 5288
unexpected failures 6
expected failures 3
untested testcases 373
unsupported tests 14
|
|
Regerating sim loses commit 1be79b1ebfad from sim/lm32/cpu.h, a
generated file, so this patch move those declarations to
sim/lm32/sim-main.h.
|
|
I had reason yesterday to want to regenerate configury files which I
do with --enable-maintainer-mode, and added --enable-cgen-maint
accidentally. The first problem I hit is that sim looks for cgen in a
different directory by default than opcodes, and I had my source
layout set up for opcodes rather than sim. Fix that by making both
use ../cgen first, then ../../cgen relative to sim/ and opcodes/. The
next problem was that various sim local.mk files expected generated
sources in the build dir rather than the source dir. Fix that by
adding $(srcdir) to paths. Finally, the generated iq2000 files had a
compile error, fixed by the cpu/iq2000.cpu patch.
cpu/
* iq2000.cpu (syscall): Add pc arg.
opcodes/
* configure.ac (cgendir): Default to ../../cgen, but use ../cgen
if found there.
* configure: Regenerate.
sim/m4/
* sim_ac_option_cgen_maint.m4 (cgendir): Look in ../cgen too.
sim/
* cris/local.mk: Add $(srcdir) to paths for regenerated source.
* frv/local.mk: Likewise.
* iq2000/local.mk: Likewise.
* lm32/local.mk: Likewise.
* m32r/local.mk: Likewise.
* or1k/local.mk: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
|
|
Remove some of the warnings generated by newer versions of ld.
* testsuite/lib/sim-defs.exp (prune_warnings_extra): New.
Arrange to run it from prune_warnings.
|
|
|
|
While looking at a bug, I noticed what I think is an off-by-one
mistake in a call to vector::reserve. This code:
new_args.reserve (args.size ());
new_args.push_back
(value_from_pointer (lookup_pointer_type (values_type), struct_addr));
new_args.insert (new_args.end (), args.begin (), args.end ());
... reserves 'size()' entries, but then proceeds to push one extra
one.
This shouldn't have any really bad effects, as insert will grow the
vector. Still, it seems better to use the correct size if we're going
to bother calling reserve.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30780
Reviewed-by: John Baldwin <jhb@FreeBSD.org>
|
|
psympriv.h was intended for use by code that created partial symbols.
Now that no generic code needs psymtab.h any more, psympriv.h can be
merged into psymtab.h.
|
|
I found that most spots including psymtab.h do not need it. This
patch removes these includes, and also one unnecessary include of
psympriv.h.
|
|
The longest register name is 3 characters (plus a nul one), so using a
4- or 8-byte pointer to get at it is neither space nor time efficient.
Embed the names right into the array. For PIE this also slightly reduces
the number of base relocations in the final image.
|
|
While they aren't opposites of each other, there also shouldn't be any
symbol for which both return true; both may return false. Therefore
use S_IS_EXTERNAL() in S_IS_LOCAL(), thus subsuming the sanity check
which so far both did alike.
|
|
bfd/
* elfxx-riscv.c (riscv_multi_subset_supports_ext): Return "c or zca"
rather than "c".
|
|
|
|
I noticed minidebug.c was still using explicit malloc and free, where
a vector would be more automatic.
Reviewed-by: John Baldwin <jhb@FreeBSD.org>
|
|
gp-display-gui (https://savannah.gnu.org/projects/gprofng-gui)
can be installed in a different directory.
In this case, $PATH is used to look up gp-display-text.
execv() does not use $PATH to find the executable.
gprofng/ChangeLog
2023-08-15 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
* src/gp-display-text.cc (reexec): Use execvp instead of execv.
|
|
This commit extends the breakpoint mechanism to allow for inferior
specific breakpoints (but not watchpoints in this commit).
As GDB gains better support for multiple connections, and so for
running multiple (possibly unrelated) inferiors, then it is not hard
to imagine that a user might wish to create breakpoints that apply to
any thread in a single inferior. To achieve this currently, the user
would need to create a condition possibly making use of the $_inferior
convenience variable, which, though functional, isn't the most user
friendly.
This commit adds a new 'inferior' keyword that allows for the creation
of inferior specific breakpoints.
Inferior specific breakpoints are automatically deleted when the
associated inferior is removed from GDB, this is similar to how
thread-specific breakpoints are deleted when the associated thread is
deleted.
Watchpoints are already per-program-space, which in most cases mean
watchpoints are already inferior specific. There is a small window
where inferior-specific watchpoints might make sense, which is after a
vfork, when two processes are sharing the same address space.
However, I'm leaving that as an exercise for another day. For now,
attempting to use the inferior keyword with a watchpoint will give an
error, like this:
(gdb) watch a8 inferior 1
Cannot use 'inferior' keyword with watchpoints
A final note on the implementation: currently, inferior specific
breakpoints, like thread-specific breakpoints, are inserted into every
inferior, GDB then checks once the inferior stops if we are in the
correct thread or inferior, and resumes automatically if we stopped in
the wrong thread/inferior.
An obvious optimisation here is to only insert breakpoint locations
into the specific program space (which mostly means inferior) that
contains either the inferior or thread we are interested in. This
would reduce the number times GDB has to stop and then resume again in
a multi-inferior setup.
I have a series on the mailing list[1] that implements this
optimisation for thread-specific breakpoints. Once this series has
landed I'll update that series to also handle inferior specific
breakpoints in the same way. For now, inferior specific breakpoints
are just slightly less optimal, but this is no different to
thread-specific breakpoints in a multi-inferior debug session, so I
don't see this as a huge problem.
[1] https://inbox.sourceware.org/gdb-patches/cover.1685479504.git.aburgess@redhat.com/
|
|
When building gdb with -O2 -flto on openSUSE Tumbleweed (using bison 3.8.2) I
run into:
...
ada-exp.c.tmp:653: warning: type 'yysymbol_kind_t' violates the C++ One \
Definition Rule [-Wodr]
c-exp.c.tmp:398: note: an enum with different value name is defined in \
another translation unit
ada-exp.c.tmp:660: note: name 'YYSYMBOL_NULL_PTR' differs from name \
'YYSYMBOL_COMPLEX_INT' defined in another translation unit
c-exp.c.tmp:405: note: mismatching definition
...
Fix this by renaming to ada_exp_yysymbol_kind_t and likewise for other .y
files.
Tested on x86_64-linux.
PR build/22395
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=22395
|
|
The elf32-kvx.c and elf64-kvx.c rules in the bfd makefile are
different to the other similar generated files, and that reminded me
that we need to have $srcdir in the generated #line reference back to
the source for debugging, but don't want it for comments in bfd.pot
(because then bfd.pot will likely reference Nick's source tree).
This patch fixes that by making all the #line use $srcdir by virtue of
using $<, and edits bfd.pot.
I also uniq list of files to remove duplicated elfxx-x86.c, sort lists
of files and regen with our standard automake/autoconf.
* configure: Regenerate.
bfd/
* Makefile.am: Sort various lists of files. Use $< in #line
directive of generated C files.
(po/SRC-POTFILES.in): uniq SRC_POTFILES.
(po/BLD-POTFILES.in): uniq BFD_POTFILES.
* Makefile.in: Regenerate.
* po/Make-in (bfd.pot): Edit out source dir from comments.
* po/SRC-POTFILES.in: Regenerate.
gas/
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
ld/
* Makefile.am (ALL_64_EMULATION_SOURCES): Sort.
* Makefile.in: Regenerate.
|
|
Commit f00b50d057 went the wrong way. As the comment says this
function is only applicable to fr550. If not fr550 return 1,
meaning we don't have acc restrictions.
|
|
When building gdb with -std=c++20, I run into:
...
gdbsupport/default-init-alloc.h:52:12: error: ‘construct’ has not been \
declared in ‘class std::allocator<unsigned char>’
52 | using A::construct;
| ^~~~~~~~~
...
Indeed, std::allocator::construct has been deprecated in c++17 and removed in
c++20.
Fix this by using instead std::pmr::polymorphic_allocator for c++20.
Tested on x86_64-linux.
|
|
In target_read_auxv we return a copy of an object:
...
gdb::optional<gdb::byte_vector>
target_read_auxv ()
{
...
return info->data;
}
...
Return a const reference instead, saving a copy.
This is exposed by using std::pmr::polymorphic_allocator instead of
std::allocator in default_init_allocator.
Tested on x86_64-linux.
|
|
When building gdb with -std=c++20, I run into:
...
gdb/dwarf2/read.c:2709:3: error: invalid conversion from ‘const char8_t*’ to \
‘const char*’ [-fpermissive]
2709 | u8"u8função",
| ^~~~~~~~~~~~
| |
| const char8_t*
...
Fix this by making the conversion explicit.
Tested on x86_64-linux.
|
