diff options
Diffstat (limited to 'gdb/linux-nat.c')
| -rw-r--r-- | gdb/linux-nat.c | 324 |
1 files changed, 139 insertions, 185 deletions
diff --git a/gdb/linux-nat.c b/gdb/linux-nat.c index cada889..f8f7284 100644 --- a/gdb/linux-nat.c +++ b/gdb/linux-nat.c @@ -69,6 +69,7 @@ #include "gdbsupport/scope-exit.h" #include "gdbsupport/gdb-sigmask.h" #include "gdbsupport/common-debug.h" +#include <unordered_map> /* This comment documents high-level logic of this file. @@ -280,7 +281,8 @@ static int lwp_status_pending_p (struct lwp_info *lp); static void save_stop_reason (struct lwp_info *lp); -static void maybe_close_proc_mem_file (pid_t pid); +static void close_proc_mem_file (pid_t pid); +static void open_proc_mem_file (ptid_t ptid); /* LWP accessors. */ @@ -514,6 +516,8 @@ linux_nat_target::follow_fork (inferior *child_inf, ptid_t child_ptid, && !signal_pass_state (gdb_signal_from_host (signo))) signo = 0; ptrace (PTRACE_DETACH, child_pid, 0, signo); + + close_proc_mem_file (child_pid); } } @@ -1059,6 +1063,8 @@ linux_nat_target::create_inferior (const char *exec_file, pass_signals ({}); inf_ptrace_target::create_inferior (exec_file, allargs, env, from_tty); + + open_proc_mem_file (inferior_ptid); } /* Callback for linux_proc_attach_tgid_threads. Attach to PTID if not @@ -1204,6 +1210,8 @@ linux_nat_target::attach (const char *args, int from_tty) lp->stopped = 1; + open_proc_mem_file (lp->ptid); + /* Save the wait status to report later. */ lp->resumed = 1; linux_nat_debug_printf ("waitpid %ld, saving status %s", @@ -1455,7 +1463,7 @@ linux_nat_target::detach (inferior *inf, int from_tty) detach_success (inf); } - maybe_close_proc_mem_file (pid); + close_proc_mem_file (pid); } /* Resume execution of the inferior process. If STEP is nonzero, @@ -1894,6 +1902,8 @@ linux_handle_extended_wait (struct lwp_info *lp, int status) if (event == PTRACE_EVENT_FORK || event == PTRACE_EVENT_VFORK) { + open_proc_mem_file (child_ptid); + /* The arch-specific native code may need to know about new forks even if those end up never mapped to an inferior. */ @@ -1999,9 +2009,13 @@ linux_handle_extended_wait (struct lwp_info *lp, int status) { linux_nat_debug_printf ("Got exec event from LWP %ld", lp->ptid.lwp ()); - /* Close the /proc/<pid>/mem file if it was open for this - inferior. */ - maybe_close_proc_mem_file (lp->ptid.pid ()); + /* Close the previous /proc/PID/mem file for this inferior, + which was using the address space which is now gone. + Reading/writing from this file would return 0/EOF. */ + close_proc_mem_file (lp->ptid.pid ()); + + /* Open a new file for the new address space. */ + open_proc_mem_file (lp->ptid); ourstatus->set_execd (make_unique_xstrdup (linux_proc_pid_to_exec_file (pid))); @@ -3566,9 +3580,7 @@ linux_nat_target::mourn_inferior () purge_lwp_list (pid); - /* Close the /proc/<pid>/mem file if it was open for this - inferior. */ - maybe_close_proc_mem_file (pid); + close_proc_mem_file (pid); if (! forks_exist_p ()) /* Normal case, no other forks available. */ @@ -3765,91 +3777,134 @@ linux_nat_target::pid_to_exec_file (int pid) return linux_proc_pid_to_exec_file (pid); } -/* Keep the /proc/<pid>/mem file open between memory accesses, as a - cache to avoid constantly closing/opening the file in the common - case of multiple memory reads/writes from/to the same inferior. - Note we don't keep a file open per inferior to avoid keeping too - many file descriptors open, which can run into resource limits. */ -static struct -{ - /* The LWP this open file is for. Note that after opening the file, - even if the thread subsequently exits, the open file is still - usable for accessing memory. It's only when the whole process - exits or execs that the file becomes invalid (at which point - reads/writes return EOF). */ - ptid_t ptid; - - /* The file descriptor. -1 if file is not open. */ - int fd = -1; +/* Object representing an /proc/PID/mem open file. We keep one such + file open per inferior. + + It might be tempting to think about only ever opening one file at + most for all inferiors, closing/reopening the file as we access + memory of different inferiors, to minimize number of file + descriptors open, which can otherwise run into resource limits. + However, that does not work correctly -- if the inferior execs and + we haven't processed the exec event yet, and, we opened a + /proc/PID/mem file, we will get a mem file accessing the post-exec + address space, thinking we're opening it for the pre-exec address + space. That is dangerous as we can poke memory (e.g. clearing + breakpoints) in the post-exec memory by mistake, corrupting the + inferior. For that reason, we open the mem file as early as + possible, right after spawning, forking or attaching to the + inferior, when the inferior is stopped and thus before it has a + chance of execing. + + Note that after opening the file, even if the thread we opened it + for subsequently exits, the open file is still usable for accessing + memory. It's only when the whole process exits or execs that the + file becomes invalid, at which point reads/writes return EOF. */ + +class proc_mem_file +{ +public: + proc_mem_file (ptid_t ptid, int fd) + : m_ptid (ptid), m_fd (fd) + { + gdb_assert (m_fd != -1); + } - /* Close FD and clear it to -1. */ - void close () + ~proc_mem_file () { linux_nat_debug_printf ("closing fd %d for /proc/%d/task/%ld/mem", - fd, ptid.pid (), ptid.lwp ()); - ::close (fd); - fd = -1; + m_fd, m_ptid.pid (), m_ptid.lwp ()); + close (m_fd); } -} last_proc_mem_file; -/* Close the /proc/<pid>/mem file if its LWP matches PTID. */ + DISABLE_COPY_AND_ASSIGN (proc_mem_file); + + int fd () + { + return m_fd; + } + +private: + /* The LWP this file was opened for. Just for debugging + purposes. */ + ptid_t m_ptid; + + /* The file descriptor. */ + int m_fd = -1; +}; + +/* The map between an inferior process id, and the open /proc/PID/mem + file. This is stored in a map instead of in a per-inferior + structure because we need to be able to access memory of processes + which don't have a corresponding struct inferior object. E.g., + with "detach-on-fork on" (the default), and "follow-fork parent" + (also default), we don't create an inferior for the fork child, but + we still need to remove breakpoints from the fork child's + memory. */ +static std::unordered_map<int, proc_mem_file> proc_mem_file_map; + +/* Close the /proc/PID/mem file for PID. */ static void -maybe_close_proc_mem_file (pid_t pid) +close_proc_mem_file (pid_t pid) { - if (last_proc_mem_file.ptid.pid () == pid) - last_proc_mem_file.close (); + proc_mem_file_map.erase (pid); } -/* Helper for linux_proc_xfer_memory_partial. Accesses /proc via - PTID. Returns -1 on error, with errno set. Returns number of - read/written bytes otherwise. Returns 0 on EOF, which indicates - the address space is gone (because the process exited or - execed). */ +/* Open the /proc/PID/mem file for the process (thread group) of PTID. + We actually open /proc/PID/task/LWP/mem, as that's the LWP we know + exists and is stopped right now. We prefer the + /proc/PID/task/LWP/mem form over /proc/LWP/mem to avoid tid-reuse + races, just in case this is ever called on an already-waited + LWP. */ -static ssize_t -linux_proc_xfer_memory_partial_pid (ptid_t ptid, - gdb_byte *readbuf, const gdb_byte *writebuf, - ULONGEST offset, LONGEST len) +static void +open_proc_mem_file (ptid_t ptid) { - ssize_t ret; + auto iter = proc_mem_file_map.find (ptid.pid ()); + gdb_assert (iter == proc_mem_file_map.end ()); - /* As long as we're hitting the same inferior, the previously open - file is good, even if the thread it was open for exits. */ - if (last_proc_mem_file.fd != -1 - && last_proc_mem_file.ptid.pid () != ptid.pid ()) - last_proc_mem_file.close (); + char filename[64]; + xsnprintf (filename, sizeof filename, + "/proc/%d/task/%ld/mem", ptid.pid (), ptid.lwp ()); - if (last_proc_mem_file.fd == -1) - { - /* Actually use /proc/<pid>/task/<lwp>/mem instead of - /proc/<lwp>/mem to avoid PID-reuse races, as we may be trying - to read memory via a thread which we've already reaped. - /proc/<lwp>/mem could open a file for the wrong process. If - the LWPID is reused for the same process it's OK, we can read - memory through it just fine. If the LWPID is reused for a - different process, then the open will fail because the path - won't exist. */ - char filename[64]; - xsnprintf (filename, sizeof filename, - "/proc/%d/task/%ld/mem", ptid.pid (), ptid.lwp ()); - - last_proc_mem_file.fd - = gdb_open_cloexec (filename, O_RDWR | O_LARGEFILE, 0).release (); - - if (last_proc_mem_file.fd == -1) - { - linux_nat_debug_printf ("opening %s failed: %s (%d)\n", - filename, safe_strerror (errno), errno); - return -1; - } - last_proc_mem_file.ptid = ptid; + int fd = gdb_open_cloexec (filename, O_RDWR | O_LARGEFILE, 0).release (); - linux_nat_debug_printf ("opened fd %d for %s", - last_proc_mem_file.fd, filename); + if (fd == -1) + { + warning (_("opening /proc/PID/mem file for lwp %d.%ld failed: %s (%d)"), + ptid.pid (), ptid.lwp (), + safe_strerror (errno), errno); + return; } - int fd = last_proc_mem_file.fd; + proc_mem_file_map.emplace (std::piecewise_construct, + std::forward_as_tuple (ptid.pid ()), + std::forward_as_tuple (ptid, fd)); + + linux_nat_debug_printf ("opened fd %d for lwp %d.%ld\n", + fd, ptid.pid (), ptid.lwp ()); +} + +/* Implement the to_xfer_partial target method using /proc/PID/mem. + Because we can use a single read/write call, this can be much more + efficient than banging away at PTRACE_PEEKTEXT. Also, unlike + PTRACE_PEEKTEXT/PTRACE_POKETEXT, this works with running + threads. */ + +static enum target_xfer_status +linux_proc_xfer_memory_partial (gdb_byte *readbuf, const gdb_byte *writebuf, + ULONGEST offset, LONGEST len, + ULONGEST *xfered_len) +{ + ssize_t ret; + + auto iter = proc_mem_file_map.find (inferior_ptid.pid ()); + if (iter == proc_mem_file_map.end ()) + return TARGET_XFER_EOF; + + int fd = iter->second.fd (); + + gdb_assert (fd != -1); /* Use pread64/pwrite64 if available, since they save a syscall and can handle 64-bit offsets even on 32-bit platforms (for instance, SPARC @@ -3866,125 +3921,24 @@ linux_proc_xfer_memory_partial_pid (ptid_t ptid, if (ret == -1) { - linux_nat_debug_printf ("accessing fd %d for pid %ld failed: %s (%d)\n", - fd, ptid.lwp (), + linux_nat_debug_printf ("accessing fd %d for pid %d failed: %s (%d)\n", + fd, inferior_ptid.pid (), safe_strerror (errno), errno); + return TARGET_XFER_EOF; } else if (ret == 0) { - linux_nat_debug_printf ("accessing fd %d for pid %ld got EOF\n", - fd, ptid.lwp ()); - } - - return ret; -} - -/* Implement the to_xfer_partial target method using /proc/<pid>/mem. - Because we can use a single read/write call, this can be much more - efficient than banging away at PTRACE_PEEKTEXT. Also, unlike - PTRACE_PEEKTEXT/PTRACE_POKETEXT, this works with running - threads. */ - -static enum target_xfer_status -linux_proc_xfer_memory_partial (gdb_byte *readbuf, const gdb_byte *writebuf, - ULONGEST offset, LONGEST len, - ULONGEST *xfered_len) -{ - /* Unlike PTRACE_PEEKTEXT/PTRACE_POKETEXT, reading/writing from/to - /proc/<pid>/mem works with running threads, and even exited - threads if the file was already open. If we need to open or - reopen the /proc file though, we may get an EACCES error - ("Permission denied"), meaning the thread is gone but its exit - status isn't reaped yet, or ENOENT if the thread is gone and - already reaped. In that case, just try opening the file for - another thread in the process. If all threads fail, then it must - mean the whole process exited, in which case there's nothing else - to do and we just fail the memory access. - - Note we don't simply always access via the leader thread because - the leader may exit without exiting the whole process. See - gdb.threads/leader-exit.exp, for example. */ - - /* It's frequently the case that the selected thread is stopped, and - is thus not likely to exit (unless something kills the process - outside our control, with e.g., SIGKILL). Give that one a try - first. - - Also, inferior_ptid may actually point at an LWP not in lwp_list. - This happens when we're detaching from a fork child that we don't - want to debug ("set detach-on-fork on"), and the breakpoints - module uninstalls breakpoints from the fork child. Which process - to access is given by inferior_ptid. */ - int res = linux_proc_xfer_memory_partial_pid (inferior_ptid, - readbuf, writebuf, - offset, len); - if (res == 0) - { - /* EOF means the address space is gone, the whole - process exited or execed. */ + /* EOF means the address space is gone, the whole process exited + or execed. */ + linux_nat_debug_printf ("accessing fd %d for pid %d got EOF\n", + fd, inferior_ptid.pid ()); return TARGET_XFER_EOF; } - else if (res != -1) - { - *xfered_len = res; - return TARGET_XFER_OK; - } else { - /* If we simply raced with the thread exiting (EACCES), or the - current thread is THREAD_EXITED (ENOENT), try some other - thread. It's easier to handle an ENOENT failure than check - for THREAD_EXIT upfront because this function is called - before a thread for inferior_ptid is added to the thread - list. */ - if (errno != EACCES && errno != ENOENT) - return TARGET_XFER_EOF; - } - - int cur_pid = current_inferior ()->pid; - - if (inferior_ptid.pid () != cur_pid) - { - /* We're accessing a fork child, and the access above failed. - Don't bother iterating the LWP list, since there's no other - LWP for this process. */ - return TARGET_XFER_EOF; - } - - /* Iterate over LWPs of the current inferior, trying to access - memory through one of them. */ - for (lwp_info *lp : all_lwps ()) - { - if (lp->ptid.pid () != cur_pid) - continue; - - res = linux_proc_xfer_memory_partial_pid (lp->ptid, - readbuf, writebuf, - offset, len); - - if (res == 0) - { - /* EOF means the address space is gone, the whole process - exited or execed. */ - return TARGET_XFER_EOF; - } - else if (res == -1) - { - if (errno == EACCES) - { - /* This LWP is gone, try another one. */ - continue; - } - - return TARGET_XFER_EOF; - } - - *xfered_len = res; + *xfered_len = ret; return TARGET_XFER_OK; } - - /* No luck. */ - return TARGET_XFER_EOF; } /* Parse LINE as a signal set and add its set bits to SIGS. */ |