diff options
62 files changed, 42043 insertions, 1 deletions
@@ -1,3 +1,8 @@ +2007-10-11 Daniel Jacobowitz <dan@codesourcery.com> + + * src-release (GDB_SUPPORT_DIRS): Add libdecnumber. + * libdecnumber: New directory, imported from GCC. + 2007-10-08 Mike Frysinger <vapier@gentoo.org> * configure.ac (CFLAGS_FOR_BUILD, CXXFLAGS_FOR_BUILD, diff --git a/MAINTAINERS b/MAINTAINERS index 6c5f732..57ad6f0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -57,6 +57,10 @@ intl/; config.rhost; libiberty/; libiberty's part of include/ merge. Otherwise, changes are automatically merged, usually within a day. +libdecnumber/ + See libiberty. The master copy of this directory is in the GCC + repository. + ltconfig; ltmain.sh; ltcf-*.sh libtool: http://www.gnu.org/software/libtool/ Changes need to be done in tandem with the official LIBTOOL diff --git a/libdecnumber/ChangeLog b/libdecnumber/ChangeLog new file mode 100644 index 0000000..38b4253 --- /dev/null +++ b/libdecnumber/ChangeLog @@ -0,0 +1,315 @@ +2007-09-10 Janis Johnson <janis187@us.ibm.com> + Ben Elliston <bje@au.ibm.com> + + * Makefile.in (libdecnumber_a_OBJS): Remove decUtility.o + (dependencies): Add Symbols headers. + * decContext.c: Upgrade to decNumber 3.53. + * decContext.h: Ditto. + * decDPD.h: Ditto. + * decNumber.c: Ditto. + * decNumber.h: Ditto. + * decNumberLocal.h: Ditto. + * decBasic.c: New file from decNumber 3.53. + * decCommon.c: Ditto. + * decDouble.c: Ditto. + * decDouble.h: Ditto. + * decQuad.c: Ditto. + * decQuad.h: Ditto. + * decSingle.c: Ditto. + * decSingle.h: Ditto. + * decPacked.c: Ditto. + * decPacked.h: Ditto. + * dpd/decimal128.c: Upgrade to decNumber 3.53. + * dpd/decimal128.h: Ditto. + * dpd/decimal32.c: Ditto. + * dpd/decimal32.h: Ditto. + * dpd/decimal64.c: Ditto. + * dpd/decimal64.h: Ditto. + * decLibrary.c (__dec_byte_swap): Remove. + * decContextSymbols.h: New file. + * decDoubleSymbols.h: New file. + * decNumberSymbols.h: New file. + * decPackedSymbols.h: New file. + * decQuadSymbols.h: New file. + * decSingleSymbols.h: New file. + * decUtility.c: Delete file. + * decUtility.h: Delete file. + * bid/decimal128Symbols.h: New file. + * bid/decimal128Local.h: New file. + * bid/decimal32Symbols.h: New file. + * bid/decimal64Symbols.h: New file. + * bid/host-ieee128.c (__swap128): Remove. + (__host_to_ieee_128, __ieee_to_host_128): Don't handle endianness. + * bid/host-ieee32.c (__dec_type_swap): Remove. + (__host_to_ieee_32, __ieee_to_host_32): Don't handle endianness. + * bid/host-ieee64.c (__swap64): Remove. + (__host_to_ieee_64, __ieee_to_host_64): Don't handle endianness. + * dpd/decimal32Symbols.h: New file. + * dpd/decimal64Symbols.h: New file. + * dpd/decimal128Symbols.h: New file. + * dpd/decimal128Local.h: New file. + +2007-06-18 Martin Michlmayr <tbm@cyrius.com> + H.J. Lu <hongjiu.lu@intel.com> + + * configure.ac: Add AC_CANONICAL_TARGET. + * configure: Regenerated. + +2007-04-16 H.J. Lu <hongjiu.lu@intel.com> + + * Makefile.in (aclocal.m4): Depend on stdint.m4 instead of + acx.m4. + + * aclocal.m4: Regenerated by aclocal 1.9.6. + +2007-04-11 Kai Tietz <kai.tietz@onevision.com> + + * configure: Regenerate. + +2007-03-23 Michael Meissner <michael.meissner@amd.com> + H.J. Lu <hongjiu.lu@intel.com> + Marius Cornea <marius.cornea@intel.com> + + * Makefile.in (enable_decimal_float): New. + (libdecnumber_a_OBJS): Add bid2dpd_dpd2bid.o, host-ieee32.o, + host-ieee64.o and host-ieee128.o for BID. + (libdecnumber_a_SOURCES): Support DPD and BID. + (decimal32.o): Support dependency for both DPD and BID. + (decimal64.o): Likewise. + (decimal128.o): Likewise. + (bid2dpd_dpd2bid.o): New target. + (host-ieee32.o): Likewise. + (host-ieee64.o): Likewise. + (host-ieee128.o): Likewise. + + * bid/bid-dpd.h: New file. + * bid/decimal128.c: Likewise. + * bid/decimal128.h: Likewise. + * bid/decimal32.c: Likewise. + * bid/decimal32.h: Likewise. + * bid/decimal64.c: Likewise. + * bid/decimal64.h: Likewise. + * bid/host-ieee128.c: Likewise. + * bid/host-ieee32.c: Likewise. + * bid/host-ieee64.c: Likewise. + * bid/bid2dpd_dpd2bid.c: Likewise. + * bid/bid2dpd_dpd2bid.h: Likewise. + + * decimal128.c: Moved to ... + * dpd/decimal128.c: This. + * decimal128.h: Moved to ... + * dpd/decimal128.h: This. + * decimal32.c: Moved to ... + * dpd/decimal32.c: This. + * decimal32.h: Moved to ... + * dpd/decimal32.h: This. + * decimal64.c: Moved to ... + * dpd/decimal64.c: This. + * decimal64.h: Moved to ... + * dpd/decimal64.h: This. + + * configure.ac: Support * --enable-decimal-float={no,yes,bid,dpd}. + Add AC_C_BIGENDIAN. Substitute enable_decimal_float. + * config.in: Add decimal support variables. + * configure: Regenerate. + + PR other/30530 + * decimal128.h (decimal128ClearSign): New. + (decimal128FlipSign): Likewise. + + * decimal32.h: (decimal32ClearSign): New. + (decimal32FlipSign): Likewise. + + * decimal64.h (decimal64ClearSign): New. + (decimal64FlipSign): Likewise. + +2007-03-08 Ben Elliston <bje@au.ibm.com> + + * decContext.c, decContext.h, decDPD.h, decimal128.c, + decimal128.h, decimal32.c, decimal32.h, decimal64.c, decimal64.h, + decLibrary.c, decNumber.c, decNumber.h, decNumberLocal.h, + decRound.c, decRound.h, decUtility.c, decUtility.h: Add + libgcc-style license exception clause. + +2007-03-01 Brooks Moses <brooks.moses@codesourcery.com> + + * Makefile.in: Add dummy install-pdf target. + +2007-01-29 Janis Johnson <janis187@us.ibm.com> + + * decExcept.c: New. + * decExcept.h: New. + +2006-11-29 Janis Johnson <janis187@us.ibm.com> + + * decRound.c: Move declarations to new file, update comments. + * decRound.h: New file. + +2006-11-21 Janis Johnson <janis187@us.ibm.com> + + * decLibrary.c (__dec_type_swap): Add prototype. + (__dfp_enable_traps, dfp_raise): Delete. + + * Makefile.in: Don't include decRound in library used by compiler. + +2006-10-10 Brooks Moses <bmoses@stanford.edu> + * Makefile.in: Added empty "pdf" target. + +2006-09-15 Kaveh R. Ghazi <ghazi@caip.rutgers.edu> + + * decNumber.c (decNumberPower): Constify. + * decNumber.h (decNumberPower): Likewise. + +2006-09-07 Kaveh R. Ghazi <ghazi@caip.rutgers.edu> + + * configure.ac (ACX_PROG_CC_WARNING_OPTS): Add -Wcast-qual. + * configure, config.in: Regenerate. + + * decContext.c (decContextStatusToString): Constify. + * decContext.h (decContextStatusToString): Likewise. + * decNumber.c (decNumberToString, decNumberToEngString, + decNumberAbs, decNumberAdd, decNumberCompare, decNumberDivide, + decNumberDivideInteger, decNumberMax, decNumberMin, + decNumberMinus, decNumberPlus, decNumberMultiply, + decNumberNormalize, decNumberQuantize, decNumberRescale, + decNumberRemainder, decNumberRemainderNear, + decNumberSameQuantum, decNumberSquareRoot, decNumberSubtract, + decNumberToIntegralValue, decNumberCopy, decToString, decAddOp, + decDivideOp, decMultiplyOp, decQuantizeOp, decCompareOp, + decCompare, decUnitCompare, decUnitAddSub, decRoundOperand, + decCopyFit, decSetCoeff, decGetInt, decNaNs, decGetDigits, + decNumberShow, decDumpAr, decCheckOperands, decCheckNumber): + Likewise. + * decNumber.h (decNumberToString, decNumberToEngString, + decNumberAbs, decNumberAdd, decNumberCompare, decNumberDivide, + decNumberDivideInteger, decNumberMax, decNumberMin, + decNumberMinus, decNumberMultiply, decNumberNormalize, + decNumberPlus, decNumberQuantize, decNumberRemainder, + decNumberRemainderNear, decNumberRescale, + decNumberSameQuantum, decNumberSquareRoot, decNumberSubtract, + decNumberToIntegralValue, decNumberCopy): Likewise. + * decUtility.c (decDensePackCoeff, decDenseUnpackCoeff): + Likewise. + * decUtility.h (decDensePackCoeff, decDenseUnpackCoeff): + Likewise. + * decimal128.c (decimal128FromNumber, decimal128ToNumber, + decimal128ToString, decimal128ToEngString, decimal128Show): + Likewise. + * decimal128.h (decimal128ToString, decimal128ToEngString, + decimal128FromNumber, decimal128ToNumber): Likewise. + * decimal32.c (decimal32FromNumber, decimal32ToNumber, + decimal32ToString, decimal32ToEngString, decimal32Show): + Likewise. + * decimal32.h (decimal32ToString, decimal32ToEngString, + decimal32FromNumber, decimal32ToNumber): Likewise. + * decimal64.c (decimal64FromNumber, decimal64ToNumber, + decimal64ToString, decimal64ToEngString, decimal64Show): + Likewise. + * decimal64.h (decimal64ToString, decimal64ToEngString, + decimal64FromNumber, decimal64ToNumber): Likewise. + +2006-08-21 Kaveh R. Ghazi <ghazi@caip.rutgers.edu> + + * decContext.c (decContextSetStatusFromString): Constify. + * decContext.h (decContextSetStatusFromString): Likewise. + * decNumber.c (decNumberFromString): Likewise. + * decNumber.h (decNumberFromString): Likewise. + * decimal128.c (decimal128FromString): Likewise. + * decimal128.h (decimal128FromString): Likewise. + * decimal32.c (decimal32FromString): Likewise. + * decimal32.h (decimal32FromString): Likewise. + * decimal64.c (decimal64FromString): Likewise. + * decimal64.h (decimal64FromString): Likewise. + +2006-07-25 Paolo Bonzini <bonzini@gnu.org> + + PR build/26188 + * configure: Regenerate. + +2006-06-23 Ben Elliston <bje@au.ibm.com> + + * decNumber.h (decNumberNegate): Remove. + +2006-05-23 Carlos O'Donell <carlos@codesourcery.com> + + * Makefile.in: Add install-html target. Add install-html to .PHONY + +2006-02-06 Ben Elliston <bje@au.ibm.com> + + * decLibrary.c (__dec_byte_swap): Use uint32_t for argument and + return types. + +2006-01-03 Roger Sayle <roger@eyesopen.com> + Kaveh R. Ghazi <ghazi@caip.rutgers.edu> + + * decNumber.c (__NO_STRING_INLINES): Define to prevent glibc macro + definition of strcpy from generating compilation warnings. + +2006-01-02 Paolo Bonzini <bonzini@gnu.org> + + PR target/25259 + * configure.ac: Use GCC_HEADER_STDINT. + * decContext.h: Include gstdint.h. + * aclocal.m4: Regenerate. + * configure: Regenerate. + +2005-12-20 Roger Sayle <roger@eyesopen.com> + + * decNumber.c (decStrEq): Cast string contents to unsigned char + instead of int before calling tolower. + +2005-12-20 Roger Sayle <roger@eyesopen.com> + + * decNumber.c (decStrEq): Cast operands to int before calling + tolower to avoid compilation warnings on Tru64. + +2005-12-05 Ben Elliston <bje@au.ibm.com> + + * Makefile.in (clean): Remove stray reference to libcpp.a. + + * decimal128.h, decContext.c, decRound.c, decimal32.c, + decNumber.c, decContext.h, decimal64.c, decimal32.h, decNumber.h, + decimal64.h, decUtility.c, decLibrary.c, configure.ac, + decNumberLocal.h, decUtility.h, decDPD.h, decimal128.c: Update FSF + office address. + +2005-12-01 Ben Elliston <bje@au.ibm.com> + + * Makefile.in (libdecnumber_a_SOURCES): Drop decLibrary.c. + * decUtility.c (__dec_byte_swap): Move from here .. + * decLibrary.c: .. to here. + +2005-11-23 Gerald Pfeifer <gerald@pfeifer.com> + + * decContext.h: Properly guard inclusion of stdint.h + * decContext.c: Include config.h + * decLibrary.c: Ditto. + * decNumber.c: Ditto. + * decRound.c: Ditto. + * decUtility.c: Ditto. + * decimal32.c: Ditto. + * decimal64.c: Ditto. + * decimal128.c: Ditto. + +2005-11-29 Ben Elliston <bje@au.ibm.com> + + * decUtility.c: Remove redundant #includes. + * decUtility.h (__dec_byte_swap): Remove prototype. + +2005-11-29 Ben Elliston <bje@au.ibm.com> + + * configure.ac: New file. + * aclocal.m4: Likewise. + * Makefile.in: Likewise. + * configure: Generate. + * config.in: Likewise. + +2005-11-29 Ben Elliston <bje@au.ibm.com> + + * decimal32.h, decimal64.h, decimal128.h: New. + * decimal32.c, decimal64.c, decimal128.c: Likewise. + * decContext.c, decContext.h: Likewise. + * decUtility.c, decUtility.h: Likewise. + * decNumber.c, decNumber.h, decNumberLocal.h: Likewise. + * decDPD.h: Likewise. + * decLibrary.c, decRound.c: Likewise. diff --git a/libdecnumber/Makefile.in b/libdecnumber/Makefile.in new file mode 100644 index 0000000..98ae9ea --- /dev/null +++ b/libdecnumber/Makefile.in @@ -0,0 +1,186 @@ +# @configure_input@ +# Makefile for libdecnumber. Run 'configure' to generate Makefile from Makefile.in + +# Copyright (C) 2005, 2007 Free Software Foundation, Inc. + +#This file is part of GCC. + +#GCC is free software; you can redistribute it and/or modify +#it under the terms of the GNU General Public License as published by +#the Free Software Foundation; either version 2, or (at your option) +#any later version. + +#GCC is distributed in the hope that it will be useful, +#but WITHOUT ANY WARRANTY; without even the implied warranty of +#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#GNU General Public License for more details. + +#You should have received a copy of the GNU General Public License +#along with GCC; see the file COPYING. If not, write to +#the Free Software Foundation, 51 Franklin Street, Fifth Floor, +#Boston MA 02110-1301, USA. + +@SET_MAKE@ + +srcdir = @srcdir@ +top_builddir = . +VPATH = @srcdir@ +INSTALL = @INSTALL@ +AR = ar +ARFLAGS = cru +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +CC = @CC@ +CFLAGS = @CFLAGS@ +WARN_CFLAGS = @WARN_CFLAGS@ @WARN_PEDANTIC@ @WERROR@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +PACKAGE = @PACKAGE@ +RANLIB = @RANLIB@ +SHELL = @SHELL@ + +datadir = @datadir@ +exec_prefix = @prefix@ +libdir = @libdir@ +localedir = $(datadir)/locale +prefix = @prefix@ + +enable_decimal_float= @enable_decimal_float@ + +INCLUDES = -I$(srcdir) -I. + +ALL_CFLAGS = $(CFLAGS) $(WARN_CFLAGS) $(INCLUDES) $(CPPFLAGS) + +libdecnumber_a_OBJS = decNumber.o decContext.o \ + decimal32.o decimal64.o decimal128.o + +ifeq ($(enable_decimal_float),bid) +libdecnumber_a_OBJS+=bid2dpd_dpd2bid.o host-ieee32.o host-ieee64.o \ + host-ieee128.o +endif + +libdecnumber_a_SOURCES = decContext.c decContext.h decDPD.h \ + decNumber.c decNumber.h decNumberLocal.h \ + dpd/decimal128.c dpd/decimal128.h \ + dpd/decimal32.c dpd/decimal32.h \ + dpd/decimal64.c dpd/decimal64.h \ + bid/decimal128.c bid/decimal128.h \ + bid/decimal32.c bid/decimal32.h \ + bid/decimal64.c bid/decimal64.h + +all: libdecnumber.a + +.SUFFIXES: +.SUFFIXES: .c .o .obj + +libdecnumber.a: $(libdecnumber_a_OBJS) + -rm -f $@ + $(AR) $(ARFLAGS) $@ $(libdecnumber_a_OBJS) + $(RANLIB) $@ + +# Rules to rebuild the configuration + +Makefile: $(srcdir)/Makefile.in config.status + $(SHELL) ./config.status Makefile + +config.status: $(srcdir)/configure + $(SHELL) ./config.status --recheck + +$(srcdir)/configure: @MAINT@ $(srcdir)/aclocal.m4 + cd $(srcdir) && $(AUTOCONF) + +$(srcdir)/aclocal.m4: @MAINT@ $(srcdir)/../config/stdint.m4 \ + $(srcdir)/../config/warnings.m4 \ + $(srcdir)/configure.ac + cd $(srcdir) && $(ACLOCAL) -I ../config + +config.h: stamp-h1 + test -f config.h || (rm -f stamp-h1 && $(MAKE) stamp-h1) + +stamp-h1: $(srcdir)/config.in config.status + -rm -f stamp-h1 + $(SHELL) ./config.status config.h + +$(srcdir)/config.in: @MAINT@ $(srcdir)/configure + cd $(srcdir) && $(AUTOHEADER) + -rm -f stamp-h1 + +# Dependencies. + +decContext.o: decContext.c decContext.h decNumberLocal.h \ + decContextSymbols.h +decNumber.o: decNumber.c decNumber.h decContext.h decNumberLocal.h \ + decNumberSymbols.h +decimal32.o: $(enable_decimal_float)/decimal32.c \ + $(enable_decimal_float)/decimal32.h \ + $(enable_decimal_float)/decimal32Symbols.h \ + decNumber.h decContext.h decNumberLocal.h + $(COMPILE) $< +decimal64.o: $(enable_decimal_float)/decimal64.c \ + $(enable_decimal_float)/decimal64.h \ + $(enable_decimal_float)/decimal64Symbols.h \ + decNumber.h decContext.h decNumberLocal.h + $(COMPILE) $< +decimal128.o: $(enable_decimal_float)/decimal128.c \ + $(enable_decimal_float)/decimal128.h \ + $(enable_decimal_float)/decimal128Symbols.h\ + $(enable_decimal_float)/decimal128Local.h\ + decNumber.h decContext.h decNumberLocal.h + $(COMPILE) $< +bid2dpd_dpd2bid.o : bid/bid2dpd_dpd2bid.c bid/bid2dpd_dpd2bid.h + $(COMPILE) $< +host-ieee32.o : bid/host-ieee32.c bid/decimal32.h + $(COMPILE) $< +host-ieee64.o : bid/host-ieee64.c bid/decimal64.h + $(COMPILE) $< +host-ieee128.o : bid/host-ieee128.c bid/decimal128.h + $(COMPILE) $< +# Other miscellaneous targets. + +mostlyclean: + -rm -f *.o + +clean: mostlyclean + -rm -rf makedepend$(EXEEXT) libdecnumber.a $(srcdir)/autom4te.cache + +distclean: clean + -rm -f config.h stamp-h1 config.status config.cache config.log \ + configure.lineno configure.status.lineno Makefile localedir.h \ + localedir.hs + +maintainer-clean: distclean + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -rm -f $(srcdir)/configure $(srcdir)/aclocal.m4 + +check: +installcheck: +dvi: +pdf: +html: +info: +install-info: +install-pdf: +install-man: +install-html: +install: + +.PHONY: installdirs install install-strip mostlyclean clean distclean \ + maintainer-clean check installcheck dvi pdf html info install-info \ + install-pdf install-man update-po install-html + +COMPILE = source='$<' object='$@' libtool=no $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(ALL_CFLAGS) -c + +# Implicit rules + +.c.o: + $(COMPILE) $< + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/libdecnumber/aclocal.m4 b/libdecnumber/aclocal.m4 new file mode 100644 index 0000000..f35b363 --- /dev/null +++ b/libdecnumber/aclocal.m4 @@ -0,0 +1,15 @@ +# generated automatically by aclocal 1.9.6 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005 Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_include([../config/stdint.m4]) +m4_include([../config/warnings.m4]) diff --git a/libdecnumber/bid/bid-dpd.h b/libdecnumber/bid/bid-dpd.h new file mode 100644 index 0000000..d8bf327 --- /dev/null +++ b/libdecnumber/bid/bid-dpd.h @@ -0,0 +1,43 @@ +/* Copyright (C) 2007 + Free Software Foundation, Inc. + +This file is part of GCC. + +GCC is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2, or (at your option) any later +version. + +GCC is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +for more details. + +You should have received a copy of the GNU General Public License +along with GCC; see the file COPYING. If not, write to the Free +Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA +02110-1301, USA. */ + +/* As a special exception, if you link this library with other files, + some of which are compiled with GCC, to produce an executable, + this library does not by itself cause the resulting executable + to be covered by the GNU General Public License. + This exception does not however invalidate any other reasons why + the executable file might be covered by the GNU General Public License. */ + +typedef unsigned int UINT32; +typedef unsigned long long UINT64; +typedef struct { UINT64 w[2]; } UINT128; + +#ifndef IN_LIBGCC2 +#define _Decimal32 UINT32 +#define _Decimal64 UINT64 +#define _Decimal128 UINT128 +#endif + +void _bid_to_dpd32 (_Decimal32 *, _Decimal32 *); +void _dpd_to_bid32 (_Decimal32 *, _Decimal32 *); +void _bid_to_dpd64 (_Decimal64 *, _Decimal64 *); +void _dpd_to_bid64 (_Decimal64 *, _Decimal64 *); +void _bid_to_dpd128 (_Decimal128 *, _Decimal128 *); +void _dpd_to_bid128 (_Decimal128 *, _Decimal128 *); diff --git a/libdecnumber/bid/bid2dpd_dpd2bid.c b/libdecnumber/bid/bid2dpd_dpd2bid.c new file mode 100644 index 0000000..01e83bc --- /dev/null +++ b/libdecnumber/bid/bid2dpd_dpd2bid.c @@ -0,0 +1,428 @@ +/* Copyright (C) 2007 Free Software Foundation, Inc. + +This file is part of GCC. + +GCC is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2, or (at your option) any later +version. + +In addition to the permissions in the GNU General Public License, the +Free Software Foundation gives you unlimited permission to link the +compiled version of this file into combinations with other programs, +and to distribute those combinations without any restriction coming +from the use of this file. (The General Public License restrictions +do apply in other respects; for example, they cover modification of +the file, and distribution when not linked into a combine +executable.) + +GCC is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +for more details. + +You should have received a copy of the GNU General Public License +along with GCC; see the file COPYING. If not, write to the Free +Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA +02110-1301, USA. */ + +#undef IN_LIBGCC2 +#include "bid-dpd.h" + +/* get full 64x64bit product */ +#define __mul_64x64_to_128(P, CX, CY) \ +{ \ + UINT64 CXH, CXL, CYH,CYL,PL,PH,PM,PM2; \ + CXH = (CX) >> 32; \ + CXL = (UINT32)(CX); \ + CYH = (CY) >> 32; \ + CYL = (UINT32)(CY); \ + \ + PM = CXH*CYL; \ + PH = CXH*CYH; \ + PL = CXL*CYL; \ + PM2 = CXL*CYH; \ + PH += (PM>>32); \ + PM = (UINT64)((UINT32)PM)+PM2+(PL>>32); \ + \ + (P).w[1] = PH + (PM>>32); \ + (P).w[0] = (PM<<32)+(UINT32)PL; \ +} + +/* add 64-bit value to 128-bit */ +#define __add_128_64(R128, A128, B64) \ +{ \ + UINT64 R64H; \ + R64H = (A128).w[1]; \ + (R128).w[0] = (B64) + (A128).w[0]; \ + if((R128).w[0] < (B64)) R64H ++; \ + (R128).w[1] = R64H; \ +} + +/* add 128-bit value to 128-bit (assume no carry-out) */ +#define __add_128_128(R128, A128, B128) \ +{ \ + UINT128 Q128; \ + Q128.w[1] = (A128).w[1]+(B128).w[1]; \ + Q128.w[0] = (B128).w[0] + (A128).w[0]; \ + if(Q128.w[0] < (B128).w[0]) Q128.w[1] ++; \ + (R128).w[1] = Q128.w[1]; \ + (R128).w[0] = Q128.w[0]; \ +} + +#define __mul_128x128_high(Q, A, B) \ +{ \ + UINT128 ALBL, ALBH, AHBL, AHBH, QM, QM2; \ + \ + __mul_64x64_to_128(ALBH, (A).w[0], (B).w[1]); \ + __mul_64x64_to_128(AHBL, (B).w[0], (A).w[1]); \ + __mul_64x64_to_128(ALBL, (A).w[0], (B).w[0]); \ + __mul_64x64_to_128(AHBH, (A).w[1],(B).w[1]); \ + \ + __add_128_128(QM, ALBH, AHBL); \ + __add_128_64(QM2, QM, ALBL.w[1]); \ + __add_128_64((Q), AHBH, QM2.w[1]); \ +} + +#include "bid2dpd_dpd2bid.h" + +static const unsigned int dm103[] = + { 0, 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000, 9000, 10000, 11000 }; + +void _bid_to_dpd32 (_Decimal32 *, _Decimal32 *); + +void +_bid_to_dpd32 (_Decimal32 *pres, _Decimal32 *px) { + unsigned int sign, coefficient_x, exp, dcoeff; + unsigned int b2, b1, b0, b01, res; + _Decimal32 x = *px; + + sign = (x & 0x80000000); + if ((x & 0x60000000ul) == 0x60000000ul) { + /* special encodings */ + if ((x & 0x78000000ul) == 0x78000000ul) { + *pres = x; /* NaN or Infinity */ + return; + } + /* coefficient */ + coefficient_x = (x & 0x001ffffful) | 0x00800000ul; + if (coefficient_x >= 10000000) coefficient_x = 0; + /* get exponent */ + exp = (x >> 21) & 0xff; + } else { + exp = (x >> 23) & 0xff; + coefficient_x = (x & 0x007ffffful); + } + b01 = coefficient_x / 1000; + b2 = coefficient_x - 1000 * b01; + b0 = b01 / 1000; + b1 = b01 - 1000 * b0; + dcoeff = b2d[b2] | b2d2[b1]; + if (b0 >= 8) { /* is b0 8 or 9? */ + res = sign | ((0x600 | ((exp >> 6) << 7) | + ((b0 & 1) << 6) | (exp & 0x3f)) << 20) | dcoeff; + } else { /* else b0 is 0..7 */ + res = sign | ((((exp >> 6) << 9) | (b0 << 6) | + (exp & 0x3f)) << 20) | dcoeff; + } + *pres = res; +} + +void _dpd_to_bid32 (_Decimal32 *, _Decimal32 *); + +void +_dpd_to_bid32 (_Decimal32 *pres, _Decimal32 *px) { + unsigned int r; + unsigned int sign, exp, bcoeff; + UINT64 trailing; + unsigned int d0, d1, d2; + _Decimal32 x = *px; + + sign = (x & 0x80000000); + trailing = (x & 0x000fffff); + if ((x & 0x78000000) == 0x78000000) { + *pres = x; + return; + } else { /* normal number */ + if ((x & 0x60000000) == 0x60000000) { /* G0..G1 = 11 -> d0 = 8 + G4 */ + d0 = d2b3[((x >> 26) & 1) | 8]; /* d0 = (comb & 0x0100 ? 9 : 8); */ + exp = (x >> 27) & 3; /* exp leading bits are G2..G3 */ + } else { + d0 = d2b3[(x >> 26) & 0x7]; + exp = (x >> 29) & 3; /* exp loading bits are G0..G1 */ + } + d1 = d2b2[(trailing >> 10) & 0x3ff]; + d2 = d2b[(trailing) & 0x3ff]; + bcoeff = d2 + d1 + d0; + exp = (exp << 6) + ((x >> 20) & 0x3f); + if (bcoeff < (1 << 23)) { + r = exp; + r <<= 23; + r |= (bcoeff | sign); + } else { + r = exp; + r <<= 21; + r |= (sign | 0x60000000ul); + /* add coeff, without leading bits */ + r |= (((unsigned int) bcoeff) & 0x1fffff); + } + } + *pres = r; +} + +void _bid_to_dpd64 (_Decimal64 *, _Decimal64 *); + +void +_bid_to_dpd64 (_Decimal64 *pres, _Decimal64 *px) { + UINT64 res; + UINT64 sign, comb, exp, B34, B01; + UINT64 d103, D61; + UINT64 b0, b2, b3, b5; + unsigned int b1, b4; + UINT64 bcoeff; + UINT64 dcoeff; + unsigned int yhi, ylo; + _Decimal64 x = *px; + + sign = (x & 0x8000000000000000ull); + comb = (x & 0x7ffc000000000000ull) >> 51; + if ((comb & 0xf00) == 0xf00) { + *pres = x; + return; + } else { /* Normal number */ + if ((comb & 0xc00) == 0xc00) { /* G0..G1 = 11 -> exp is G2..G11 */ + exp = (comb) & 0x3ff; + bcoeff = (x & 0x0007ffffffffffffull) | 0x0020000000000000ull; + } else { + exp = (comb >> 2) & 0x3ff; + bcoeff = (x & 0x001fffffffffffffull); + } + D61 = 2305843009ull; /* Floor(2^61 / 10^9) */ + /* Multiply the binary coefficient by ceil(2^64 / 1000), and take the upper + 64-bits in order to compute a division by 1000. */ + yhi = (D61 * (UINT64)(bcoeff >> (UINT64)27)) >> (UINT64)34; + ylo = bcoeff - 1000000000ull * yhi; + if (ylo >= 1000000000) { + ylo = ylo - 1000000000; + yhi = yhi + 1; + } + d103 = 0x4189374c; + B34 = ((UINT64) ylo * d103) >> (32 + 8); + B01 = ((UINT64) yhi * d103) >> (32 + 8); + b5 = ylo - B34 * 1000; + b2 = yhi - B01 * 1000; + b3 = ((UINT64) B34 * d103) >> (32 + 8); + b0 = ((UINT64) B01 * d103) >> (32 + 8); + b4 = (unsigned int) B34 - (unsigned int) b3 *1000; + b1 = (unsigned int) B01 - (unsigned int) dm103[b0]; + dcoeff = b2d[b5] | b2d2[b4] | b2d3[b3] | b2d4[b2] | b2d5[b1]; + if (b0 >= 8) /* is b0 8 or 9? */ + res = sign | ((0x1800 | ((exp >> 8) << 9) | ((b0 & 1) << 8) | + (exp & 0xff)) << 50) | dcoeff; + else /* else b0 is 0..7 */ + res = sign | ((((exp >> 8) << 11) | (b0 << 8) | + (exp & 0xff)) << 50) | dcoeff; + } + *pres = res; +} + +void _dpd_to_bid64 (_Decimal64 *, _Decimal64 *); + +void +_dpd_to_bid64 (_Decimal64 *pres, _Decimal64 *px) { + UINT64 res; + UINT64 sign, comb, exp; + UINT64 trailing; + UINT64 d0, d1, d2; + unsigned int d3, d4, d5; + UINT64 bcoeff, mask; + _Decimal64 x = *px; + + sign = (x & 0x8000000000000000ull); + comb = (x & 0x7ffc000000000000ull) >> 50; + trailing = (x & 0x0003ffffffffffffull); + if ((comb & 0x1e00) == 0x1e00) { + if ((comb & 0x1f00) == 0x1f00) { /* G0..G4 = 11111 -> NaN */ + if (comb & 0x0100) { /* G5 = 1 -> sNaN */ + *pres = x; + } else { /* G5 = 0 -> qNaN */ + *pres = x; + } + } else { /*if ((comb & 0x1e00) == 0x1e00); G0..G4 = 11110 -> INF */ + *pres = x; + } + return; + } else { /* normal number */ + if ((comb & 0x1800) == 0x1800) { /* G0..G1 = 11 -> d0 = 8 + G4 */ + d0 = d2b6[((comb >> 8) & 1) | 8]; /* d0 = (comb & 0x0100 ? 9 : 8); */ + exp = (comb & 0x600) >> 1; /* exp = (comb & 0x0400 ? 1 : 0) * 0x200 + + (comb & 0x0200 ? 1 : 0) * 0x100; exp leading bits are G2..G3 */ + } else { + d0 = d2b6[(comb >> 8) & 0x7]; + exp = (comb & 0x1800) >> 3; /* exp = (comb & 0x1000 ? 1 : 0) * 0x200 + + (comb & 0x0800 ? 1 : 0) * 0x100; exp loading bits are G0..G1 */ + } + d1 = d2b5[(trailing >> 40) & 0x3ff]; + d2 = d2b4[(trailing >> 30) & 0x3ff]; + d3 = d2b3[(trailing >> 20) & 0x3ff]; + d4 = d2b2[(trailing >> 10) & 0x3ff]; + d5 = d2b[(trailing) & 0x3ff]; + bcoeff = (d5 + d4 + d3) + d2 + d1 + d0; + exp += (comb & 0xff); + mask = 1; + mask <<= 53; + if (bcoeff < mask) { /* check whether coefficient fits in 10*5+3 bits */ + res = exp; + res <<= 53; + res |= (bcoeff | sign); + *pres = res; + return; + } + /* special format */ + res = (exp << 51) | (sign | 0x6000000000000000ull); + /* add coeff, without leading bits */ + mask = (mask >> 2) - 1; + bcoeff &= mask; + res |= bcoeff; + } + *pres = res; +} + +void _bid_to_dpd128 (_Decimal128 *, _Decimal128 *); + +void +_bid_to_dpd128 (_Decimal128 *pres, _Decimal128 *px) { + UINT128 res; + UINT128 sign; + unsigned int comb; + UINT128 bcoeff; + UINT128 dcoeff; + UINT128 BH, d1018, BT2, BT1; + UINT64 exp, BL, d109; + UINT64 d106, d103; + UINT64 k1, k2, k4, k5, k7, k8, k10, k11; + unsigned int BHH32, BLL32, BHL32, BLH32, k0, k3, k6, k9, amount; + _Decimal128 x = *px; + + sign.w[1] = (x.w[1] & 0x8000000000000000ull); + sign.w[0] = 0; + comb = (x.w[1] /*& 0x7fffc00000000000ull */ ) >> 46; + exp = 0; + if ((comb & 0x1e000) == 0x1e000) { + if ((comb & 0x1f000) == 0x1f000) { /* G0..G4 = 11111 -> NaN */ + if (comb & 0x01000) { /* G5 = 1 -> sNaN */ + res = x; + } else { /* G5 = 0 -> qNaN */ + res = x; + } + } else { /* G0..G4 = 11110 -> INF */ + res = x; + } + } else { /* normal number */ + exp = ((x.w[1] & 0x7fff000000000000ull) >> 49) & 0x3fff; + bcoeff.w[1] = (x.w[1] & 0x0001ffffffffffffull); + bcoeff.w[0] = x.w[0]; + d1018 = reciprocals10_128[18]; + __mul_128x128_high (BH, bcoeff, d1018); + amount = recip_scale[18]; + BH.w[0] = (BH.w[0] >> amount) | (BH.w[1] << (64 - amount)); + BL = bcoeff.w[0] - BH.w[0] * 1000000000000000000ull; + d109 = reciprocals10_64[9]; + __mul_64x64_to_128 (BT1, BH.w[0], d109); + BHH32 = (unsigned int) (BT1.w[1] >> short_recip_scale[9]); + BHL32 = (unsigned int) BH.w[0] - BHH32 * 1000000000; + __mul_64x64_to_128 (BT2, BL, d109); + BLH32 = (unsigned int) (BT2.w[1] >> short_recip_scale[9]); + BLL32 = (unsigned int) BL - BLH32 * 1000000000; + d106 = 0x431BDE83; + d103 = 0x4189374c; + k0 = ((UINT64) BHH32 * d106) >> (32 + 18); + BHH32 -= (unsigned int) k0 *1000000; + k1 = ((UINT64) BHH32 * d103) >> (32 + 8); + k2 = BHH32 - (unsigned int) k1 *1000; + k3 = ((UINT64) BHL32 * d106) >> (32 + 18); + BHL32 -= (unsigned int) k3 *1000000; + k4 = ((UINT64) BHL32 * d103) >> (32 + 8); + k5 = BHL32 - (unsigned int) k4 *1000; + k6 = ((UINT64) BLH32 * d106) >> (32 + 18); + BLH32 -= (unsigned int) k6 *1000000; + k7 = ((UINT64) BLH32 * d103) >> (32 + 8); + k8 = BLH32 - (unsigned int) k7 *1000; + k9 = ((UINT64) BLL32 * d106) >> (32 + 18); + BLL32 -= (unsigned int) k9 *1000000; + k10 = ((UINT64) BLL32 * d103) >> (32 + 8); + k11 = BLL32 - (unsigned int) k10 *1000; + dcoeff.w[1] = (b2d[k5] >> 4) | (b2d[k4] << 6) | (b2d[k3] << 16) | + (b2d[k2] << 26) | (b2d[k1] << 36); + dcoeff.w[0] = b2d[k11] | (b2d[k10] << 10) | (b2d[k9] << 20) | + (b2d[k8] << 30) | (b2d[k7] << 40) | (b2d[k6] << 50) | (b2d[k5] << 60); + res.w[0] = dcoeff.w[0]; + if (k0 >= 8) { + res.w[1] = sign.w[1] | ((0x18000 | ((exp >> 12) << 13) | + ((k0 & 1) << 12) | (exp & 0xfff)) << 46) | dcoeff.w[1]; + } else { + res.w[1] = sign.w[1] | ((((exp >> 12) << 15) | (k0 << 12) | + (exp & 0xfff)) << 46) | dcoeff.w[1]; + } + } + *pres = res; +} + +void _dpd_to_bid128 (_Decimal128 *, _Decimal128 *); + +void +_dpd_to_bid128 (_Decimal128 *pres, _Decimal128 *px) { + UINT128 res; + UINT128 sign; + UINT64 exp, comb; + UINT128 trailing; + UINT64 d0, d1, d2, d3, d4, d5, d6, d7, d8, d9, d10, d11; + UINT128 bcoeff; + UINT64 tl, th; + _Decimal128 x = *px; + + sign.w[1] = (x.w[1] & 0x8000000000000000ull); + sign.w[0] = 0; + comb = (x.w[1] & 0x7fffc00000000000ull) >> 46; + trailing.w[1] = x.w[1]; + trailing.w[0] = x.w[0]; + if ((comb & 0x1e000) == 0x1e000) { + if ((comb & 0x1f000) == 0x1f000) { /* G0..G4 = 11111 -> NaN */ + if (comb & 0x01000) { /* G5 = 1 -> sNaN */ + *pres = x; + } else { /* G5 = 0 -> qNaN */ + *pres = x; + } + } else { /* G0..G4 = 11110 -> INF */ + *pres = x; + } + return; + } else { /* Normal number */ + if ((comb & 0x18000) == 0x18000) { /* G0..G1 = 11 -> d0 = 8 + G4 */ + d0 = d2b6[8 + ((comb & 0x01000) >> 12)]; + exp = (comb & 0x06000) >> 1; /* exp leading bits are G2..G3 */ + } else { + d0 = d2b6[((comb & 0x07000) >> 12)]; + exp = (comb & 0x18000) >> 3; /* exp loading bits are G0..G1 */ + } + d11 = d2b[(trailing.w[0]) & 0x3ff]; + d10 = d2b2[(trailing.w[0] >> 10) & 0x3ff]; + d9 = d2b3[(trailing.w[0] >> 20) & 0x3ff]; + d8 = d2b4[(trailing.w[0] >> 30) & 0x3ff]; + d7 = d2b5[(trailing.w[0] >> 40) & 0x3ff]; + d6 = d2b6[(trailing.w[0] >> 50) & 0x3ff]; + d5 = d2b[(trailing.w[0] >> 60) | ((trailing.w[1] & 0x3f) << 4)]; + d4 = d2b2[(trailing.w[1] >> 6) & 0x3ff]; + d3 = d2b3[(trailing.w[1] >> 16) & 0x3ff]; + d2 = d2b4[(trailing.w[1] >> 26) & 0x3ff]; + d1 = d2b5[(trailing.w[1] >> 36) & 0x3ff]; + tl = d11 + d10 + d9 + d8 + d7 + d6; + th = d5 + d4 + d3 + d2 + d1 + d0; + __mul_64x64_to_128 (bcoeff, th, 1000000000000000000ull); + __add_128_64 (bcoeff, bcoeff, tl); + exp += (comb & 0xfff); + res.w[0] = bcoeff.w[0]; + res.w[1] = (exp << 49) | sign.w[1] | bcoeff.w[1]; + } + *pres = res; +} diff --git a/libdecnumber/bid/bid2dpd_dpd2bid.h b/libdecnumber/bid/bid2dpd_dpd2bid.h new file mode 100644 index 0000000..7728cff --- /dev/null +++ b/libdecnumber/bid/bid2dpd_dpd2bid.h @@ -0,0 +1,10407 @@ +/* Copyright (C) 2007 Free Software Foundation, Inc. + +This file is part of GCC. + +GCC is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2, or (at your option) any later +version. + +In addition to the permissions in the GNU General Public License, the +Free Software Foundation gives you unlimited permission to link the +compiled version of this file into combinations with other programs, +and to distribute those combinations without any restriction coming +from the use of this file. (The General Public License restrictions +do apply in other respects; for example, they cover modification of +the file, and distribution when not linked into a combine +executable.) + +GCC is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +for more details. + +You should have received a copy of the GNU General Public License +along with GCC; see the file COPYING. If not, write to the Free +Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA +02110-1301, USA. */ + +static const UINT128 reciprocals10_128[] = { + { { 0ull, 0ull } }, /* 0 extra digits */ + { { 0x3333333333333334ull ,0x3333333333333333ull } }, /* 1 extra digit */ + { { 0x51eb851eb851eb86ull ,0x051eb851eb851eb8ull } }, /* 2 extra digits */ + { { 0x3b645a1cac083127ull, 0x0083126e978d4fdfull } }, /* 3 extra digits */ + { { 0x4af4f0d844d013aaULL, 0x00346dc5d6388659ULL } }, /* 10^(-4) * 2^131 */ + { { 0x08c3f3e0370cdc88ULL, 0x0029f16b11c6d1e1ULL } }, /* 10^(-5) * 2^134 */ + { { 0x6d698fe69270b06dULL, 0x00218def416bdb1aULL } }, /* 10^(-6) * 2^137 */ + { { 0xaf0f4ca41d811a47ULL, 0x0035afe535795e90ULL } }, /* 10^(-7) * 2^141 */ + { { 0xbf3f70834acdaea0ULL, 0x002af31dc4611873ULL } }, /* 10^(-8) * 2^144 */ + { { 0x65cc5a02a23e254dULL, 0x00225c17d04dad29ULL } }, /* 10^(-9) * 2^147 */ + { { 0x6fad5cd10396a214ULL, 0x0036f9bfb3af7b75ULL } }, /* 10^(-10) * 2^151 */ + { { 0xbfbde3da69454e76ULL, 0x002bfaffc2f2c92aULL } }, /* 10^(-11) * 2^154 */ + { { 0x32fe4fe1edd10b92ULL, 0x00232f33025bd422ULL } }, /* 10^(-12) * 2^157 */ + { { 0x84ca19697c81ac1cULL, 0x00384b84d092ed03ULL } }, /* 10^(-13) * 2^161 */ + { { 0x03d4e1213067bce4ULL, 0x002d09370d425736ULL } }, /* 10^(-14) * 2^164 */ + { { 0x3643e74dc052fd83ULL, 0x0024075f3dceac2bULL } }, /* 10^(-15) * 2^167 */ + { { 0x56d30baf9a1e626bULL, 0x0039a5652fb11378ULL } }, /* 10^(-16) * 2^171 */ + { { 0x12426fbfae7eb522ULL, 0x002e1dea8c8da92dULL } }, /* 10^(-17) * 2^174 */ + { { 0x41cebfcc8b9890e8ULL, 0x0024e4bba3a48757ULL } }, /* 10^(-18) * 2^177 */ + { { 0x694acc7a78f41b0dULL, 0x003b07929f6da558ULL } }, /* 10^(-19) * 2^181 */ + { { 0xbaa23d2ec729af3eULL, 0x002f394219248446ULL } }, /* 10^(-20) * 2^184 */ + { { 0xfbb4fdbf05baf298ULL, 0x0025c768141d369eULL } }, /* 10^(-21) * 2^187 */ + { { 0x2c54c931a2c4b759ULL, 0x003c7240202ebdcbULL } }, /* 10^(-22) * 2^191 */ + { { 0x89dd6dc14f03c5e1ULL, 0x00305b66802564a2ULL } }, /* 10^(-23) * 2^194 */ + { { 0xd4b1249aa59c9e4eULL, 0x0026af8533511d4eULL } }, /* 10^(-24) * 2^197 */ + { { 0x544ea0f76f60fd49ULL, 0x003de5a1ebb4fbb1ULL } }, /* 10^(-25) * 2^201 */ + { { 0x76a54d92bf80caa1ULL, 0x00318481895d9627ULL } }, /* 10^(-26) * 2^204 */ + { { 0x921dd7a89933d54eULL, 0x00279d346de4781fULL } }, /* 10^(-27) * 2^207 */ + { { 0x8362f2a75b862215ULL, 0x003f61ed7ca0c032ULL } }, /* 10^(-28) * 2^211 */ + { { 0xcf825bb91604e811ULL, 0x0032b4bdfd4d668eULL } }, /* 10^(-29) * 2^214 */ + { { 0x0c684960de6a5341ULL, 0x00289097fdd7853fULL } }, /* 10^(-30) * 2^217 */ + { { 0x3d203ab3e521dc34ULL, 0x002073accb12d0ffULL } }, /* 10^(-31) * 2^220 */ + { { 0x2e99f7863b696053ULL, 0x0033ec47ab514e65ULL } }, /* 10^(-32) * 2^224 */ + { { 0x587b2c6b62bab376ULL, 0x002989d2ef743eb7ULL } }, /* 10^(-33) * 2^227 */ + { { 0xad2f56bc4efbc2c5ULL, 0x00213b0f25f69892ULL } }, /* 10^(-34) * 2^230 */ + { { 0x0f2abc9d8c9689d1ull, 0x01a95a5b7f87a0efull } } /* 35 extra digits */ +}; + +static const int recip_scale[] = { + 129 - 128, /* 1 */ + 129 - 128, /* 1/10 */ + 129 - 128, /* 1/10^2 */ + 129 - 128, /* 1/10^3 */ + 3, /* 131 - 128 */ + 6, /* 134 - 128 */ + 9, /* 137 - 128 */ + 13, /* 141 - 128 */ + 16, /* 144 - 128 */ + 19, /* 147 - 128 */ + 23, /* 151 - 128 */ + 26, /* 154 - 128 */ + 29, /* 157 - 128 */ + 33, /* 161 - 128 */ + 36, /* 164 - 128 */ + 39, /* 167 - 128 */ + 43, /* 171 - 128 */ + 46, /* 174 - 128 */ + 49, /* 177 - 128 */ + 53, /* 181 - 128 */ + 56, /* 184 - 128 */ + 59, /* 187 - 128 */ + 63, /* 191 - 128 */ + + 66, /* 194 - 128 */ + 69, /* 197 - 128 */ + 73, /* 201 - 128 */ + 76, /* 204 - 128 */ + 79, /* 207 - 128 */ + 83, /* 211 - 128 */ + 86, /* 214 - 128 */ + 89, /* 217 - 128 */ + 92, /* 220 - 128 */ + 96, /* 224 - 128 */ + 99, /* 227 - 128 */ + 102, /* 230 - 128 */ + 237 - 128, /* 1/10^35 */ +}; + +static const int short_recip_scale[] = { + 1, + 65 - 64, + 69 - 64, + 71 - 64, + 75 - 64, + 78 - 64, + 81 - 64, + 85 - 64, + 88 - 64, + 91 - 64, + 95 - 64, + 98 - 64, + 101 - 64, + 105 - 64, + 108 - 64, + 111 - 64, + 115 - 64, /* 114 - 64 */ + 118 - 64 +}; + +static const unsigned long long reciprocals10_64[] = { + 1ull, /* dummy value for 0 extra digits */ + 0x3333333333333334ull, /* 1 extra digit */ + 0x51eb851eb851eb86ull, + 0x20c49ba5e353f7cfull, + 0x346dc5d63886594bull, + 0x29f16b11c6d1e109ull, + 0x218def416bdb1a6eull, + 0x35afe535795e90b0ull, + 0x2af31dc4611873c0ull, + 0x225c17d04dad2966ull, + 0x36f9bfb3af7b7570ull, + 0x2bfaffc2f2c92ac0ull, + 0x232f33025bd42233ull, + 0x384b84d092ed0385ull, + 0x2d09370d42573604ull, + 0x24075f3dceac2b37ull, + 0x39a5652fb1137857ull, + 0x2e1dea8c8da92d13ull +}; + +static const UINT64 d2b[] = { + 0, 1, 2, 3, 4, 5, 6, 7, + 8, 9, 80, 81, 800, 801, 880, 881, + 10, 11, 12, 13, 14, 15, 16, 17, + 18, 19, 90, 91, 810, 811, 890, 891, + 20, 21, 22, 23, 24, 25, 26, 27, + 28, 29, 82, 83, 820, 821, 808, 809, + 30, 31, 32, 33, 34, 35, 36, 37, + 38, 39, 92, 93, 830, 831, 818, 819, + 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 84, 85, 840, 841, 88, 89, + 50, 51, 52, 53, 54, 55, 56, 57, + 58, 59, 94, 95, 850, 851, 98, 99, + 60, 61, 62, 63, 64, 65, 66, 67, + 68, 69, 86, 87, 860, 861, 888, 889, + 70, 71, 72, 73, 74, 75, 76, 77, + 78, 79, 96, 97, 870, 871, 898, 899, + 100, 101, 102, 103, 104, 105, 106, 107, + 108, 109, 180, 181, 900, 901, 980, 981, + 110, 111, 112, 113, 114, 115, 116, 117, + 118, 119, 190, 191, 910, 911, 990, 991, + 120, 121, 122, 123, 124, 125, 126, 127, + 128, 129, 182, 183, 920, 921, 908, 909, + 130, 131, 132, 133, 134, 135, 136, 137, + 138, 139, 192, 193, 930, 931, 918, 919, + 140, 141, 142, 143, 144, 145, 146, 147, + 148, 149, 184, 185, 940, 941, 188, 189, + 150, 151, 152, 153, 154, 155, 156, 157, + 158, 159, 194, 195, 950, 951, 198, 199, + 160, 161, 162, 163, 164, 165, 166, 167, + 168, 169, 186, 187, 960, 961, 988, 989, + 170, 171, 172, 173, 174, 175, 176, 177, + 178, 179, 196, 197, 970, 971, 998, 999, + 200, 201, 202, 203, 204, 205, 206, 207, + 208, 209, 280, 281, 802, 803, 882, 883, + 210, 211, 212, 213, 214, 215, 216, 217, + 218, 219, 290, 291, 812, 813, 892, 893, + 220, 221, 222, 223, 224, 225, 226, 227, + 228, 229, 282, 283, 822, 823, 828, 829, + 230, 231, 232, 233, 234, 235, 236, 237, + 238, 239, 292, 293, 832, 833, 838, 839, + 240, 241, 242, 243, 244, 245, 246, 247, + 248, 249, 284, 285, 842, 843, 288, 289, + 250, 251, 252, 253, 254, 255, 256, 257, + 258, 259, 294, 295, 852, 853, 298, 299, + 260, 261, 262, 263, 264, 265, 266, 267, + 268, 269, 286, 287, 862, 863, 888, 889, + 270, 271, 272, 273, 274, 275, 276, 277, + 278, 279, 296, 297, 872, 873, 898, 899, + 300, 301, 302, 303, 304, 305, 306, 307, + 308, 309, 380, 381, 902, 903, 982, 983, + 310, 311, 312, 313, 314, 315, 316, 317, + 318, 319, 390, 391, 912, 913, 992, 993, + 320, 321, 322, 323, 324, 325, 326, 327, + 328, 329, 382, 383, 922, 923, 928, 929, + 330, 331, 332, 333, 334, 335, 336, 337, + 338, 339, 392, 393, 932, 933, 938, 939, + 340, 341, 342, 343, 344, 345, 346, 347, + 348, 349, 384, 385, 942, 943, 388, 389, + 350, 351, 352, 353, 354, 355, 356, 357, + 358, 359, 394, 395, 952, 953, 398, 399, + 360, 361, 362, 363, 364, 365, 366, 367, + 368, 369, 386, 387, 962, 963, 988, 989, + 370, 371, 372, 373, 374, 375, 376, 377, + 378, 379, 396, 397, 972, 973, 998, 999, + 400, 401, 402, 403, 404, 405, 406, 407, + 408, 409, 480, 481, 804, 805, 884, 885, + 410, 411, 412, 413, 414, 415, 416, 417, + 418, 419, 490, 491, 814, 815, 894, 895, + 420, 421, 422, 423, 424, 425, 426, 427, + 428, 429, 482, 483, 824, 825, 848, 849, + 430, 431, 432, 433, 434, 435, 436, 437, + 438, 439, 492, 493, 834, 835, 858, 859, + 440, 441, 442, 443, 444, 445, 446, 447, + 448, 449, 484, 485, 844, 845, 488, 489, + 450, 451, 452, 453, 454, 455, 456, 457, + 458, 459, 494, 495, 854, 855, 498, 499, + 460, 461, 462, 463, 464, 465, 466, 467, + 468, 469, 486, 487, 864, 865, 888, 889, + 470, 471, 472, 473, 474, 475, 476, 477, + 478, 479, 496, 497, 874, 875, 898, 899, + 500, 501, 502, 503, 504, 505, 506, 507, + 508, 509, 580, 581, 904, 905, 984, 985, + 510, 511, 512, 513, 514, 515, 516, 517, + 518, 519, 590, 591, 914, 915, 994, 995, + 520, 521, 522, 523, 524, 525, 526, 527, + 528, 529, 582, 583, 924, 925, 948, 949, + 530, 531, 532, 533, 534, 535, 536, 537, + 538, 539, 592, 593, 934, 935, 958, 959, + 540, 541, 542, 543, 544, 545, 546, 547, + 548, 549, 584, 585, 944, 945, 588, 589, + 550, 551, 552, 553, 554, 555, 556, 557, + 558, 559, 594, 595, 954, 955, 598, 599, + 560, 561, 562, 563, 564, 565, 566, 567, + 568, 569, 586, 587, 964, 965, 988, 989, + 570, 571, 572, 573, 574, 575, 576, 577, + 578, 579, 596, 597, 974, 975, 998, 999, + 600, 601, 602, 603, 604, 605, 606, 607, + 608, 609, 680, 681, 806, 807, 886, 887, + 610, 611, 612, 613, 614, 615, 616, 617, + 618, 619, 690, 691, 816, 817, 896, 897, + 620, 621, 622, 623, 624, 625, 626, 627, + 628, 629, 682, 683, 826, 827, 868, 869, + 630, 631, 632, 633, 634, 635, 636, 637, + 638, 639, 692, 693, 836, 837, 878, 879, + 640, 641, 642, 643, 644, 645, 646, 647, + 648, 649, 684, 685, 846, 847, 688, 689, + 650, 651, 652, 653, 654, 655, 656, 657, + 658, 659, 694, 695, 856, 857, 698, 699, + 660, 661, 662, 663, 664, 665, 666, 667, + 668, 669, 686, 687, 866, 867, 888, 889, + 670, 671, 672, 673, 674, 675, 676, 677, + 678, 679, 696, 697, 876, 877, 898, 899, + 700, 701, 702, 703, 704, 705, 706, 707, + 708, 709, 780, 781, 906, 907, 986, 987, + 710, 711, 712, 713, 714, 715, 716, 717, + 718, 719, 790, 791, 916, 917, 996, 997, + 720, 721, 722, 723, 724, 725, 726, 727, + 728, 729, 782, 783, 926, 927, 968, 969, + 730, 731, 732, 733, 734, 735, 736, 737, + 738, 739, 792, 793, 936, 937, 978, 979, + 740, 741, 742, 743, 744, 745, 746, 747, + 748, 749, 784, 785, 946, 947, 788, 789, + 750, 751, 752, 753, 754, 755, 756, 757, + 758, 759, 794, 795, 956, 957, 798, 799, + 760, 761, 762, 763, 764, 765, 766, 767, + 768, 769, 786, 787, 966, 967, 988, 989, + 770, 771, 772, 773, 774, 775, 776, 777, + 778, 779, 796, 797, 976, 977, 998, 999 }; + +static const UINT64 d2b2[] = { + 0000ull, 1000ull, 2000ull, 3000ull, + 4000ull, 5000ull, 6000ull, 7000ull, + 8000ull, 9000ull, 80000ull, 81000ull, + 800000ull, 801000ull, 880000ull, 881000ull, + 10000ull, 11000ull, 12000ull, 13000ull, + 14000ull, 15000ull, 16000ull, 17000ull, + 18000ull, 19000ull, 90000ull, 91000ull, + 810000ull, 811000ull, 890000ull, 891000ull, + 20000ull, 21000ull, 22000ull, 23000ull, + 24000ull, 25000ull, 26000ull, 27000ull, + 28000ull, 29000ull, 82000ull, 83000ull, + 820000ull, 821000ull, 808000ull, 809000ull, + 30000ull, 31000ull, 32000ull, 33000ull, + 34000ull, 35000ull, 36000ull, 37000ull, + 38000ull, 39000ull, 92000ull, 93000ull, + 830000ull, 831000ull, 818000ull, 819000ull, + 40000ull, 41000ull, 42000ull, 43000ull, + 44000ull, 45000ull, 46000ull, 47000ull, + 48000ull, 49000ull, 84000ull, 85000ull, + 840000ull, 841000ull, 88000ull, 89000ull, + 50000ull, 51000ull, 52000ull, 53000ull, + 54000ull, 55000ull, 56000ull, 57000ull, + 58000ull, 59000ull, 94000ull, 95000ull, + 850000ull, 851000ull, 98000ull, 99000ull, + 60000ull, 61000ull, 62000ull, 63000ull, + 64000ull, 65000ull, 66000ull, 67000ull, + 68000ull, 69000ull, 86000ull, 87000ull, + 860000ull, 861000ull, 888000ull, 889000ull, + 70000ull, 71000ull, 72000ull, 73000ull, + 74000ull, 75000ull, 76000ull, 77000ull, + 78000ull, 79000ull, 96000ull, 97000ull, + 870000ull, 871000ull, 898000ull, 899000ull, + 100000ull, 101000ull, 102000ull, 103000ull, + 104000ull, 105000ull, 106000ull, 107000ull, + 108000ull, 109000ull, 180000ull, 181000ull, + 900000ull, 901000ull, 980000ull, 981000ull, + 110000ull, 111000ull, 112000ull, 113000ull, + 114000ull, 115000ull, 116000ull, 117000ull, + 118000ull, 119000ull, 190000ull, 191000ull, + 910000ull, 911000ull, 990000ull, 991000ull, + 120000ull, 121000ull, 122000ull, 123000ull, + 124000ull, 125000ull, 126000ull, 127000ull, + 128000ull, 129000ull, 182000ull, 183000ull, + 920000ull, 921000ull, 908000ull, 909000ull, + 130000ull, 131000ull, 132000ull, 133000ull, + 134000ull, 135000ull, 136000ull, 137000ull, + 138000ull, 139000ull, 192000ull, 193000ull, + 930000ull, 931000ull, 918000ull, 919000ull, + 140000ull, 141000ull, 142000ull, 143000ull, + 144000ull, 145000ull, 146000ull, 147000ull, + 148000ull, 149000ull, 184000ull, 185000ull, + 940000ull, 941000ull, 188000ull, 189000ull, + 150000ull, 151000ull, 152000ull, 153000ull, + 154000ull, 155000ull, 156000ull, 157000ull, + 158000ull, 159000ull, 194000ull, 195000ull, + 950000ull, 951000ull, 198000ull, 199000ull, + 160000ull, 161000ull, 162000ull, 163000ull, + 164000ull, 165000ull, 166000ull, 167000ull, + 168000ull, 169000ull, 186000ull, 187000ull, + 960000ull, 961000ull, 988000ull, 989000ull, + 170000ull, 171000ull, 172000ull, 173000ull, + 174000ull, 175000ull, 176000ull, 177000ull, + 178000ull, 179000ull, 196000ull, 197000ull, + 970000ull, 971000ull, 998000ull, 999000ull, + 200000ull, 201000ull, 202000ull, 203000ull, + 204000ull, 205000ull, 206000ull, 207000ull, + 208000ull, 209000ull, 280000ull, 281000ull, + 802000ull, 803000ull, 882000ull, 883000ull, + 210000ull, 211000ull, 212000ull, 213000ull, + 214000ull, 215000ull, 216000ull, 217000ull, + 218000ull, 219000ull, 290000ull, 291000ull, + 812000ull, 813000ull, 892000ull, 893000ull, + 220000ull, 221000ull, 222000ull, 223000ull, + 224000ull, 225000ull, 226000ull, 227000ull, + 228000ull, 229000ull, 282000ull, 283000ull, + 822000ull, 823000ull, 828000ull, 829000ull, + 230000ull, 231000ull, 232000ull, 233000ull, + 234000ull, 235000ull, 236000ull, 237000ull, + 238000ull, 239000ull, 292000ull, 293000ull, + 832000ull, 833000ull, 838000ull, 839000ull, + 240000ull, 241000ull, 242000ull, 243000ull, + 244000ull, 245000ull, 246000ull, 247000ull, + 248000ull, 249000ull, 284000ull, 285000ull, + 842000ull, 843000ull, 288000ull, 289000ull, + 250000ull, 251000ull, 252000ull, 253000ull, + 254000ull, 255000ull, 256000ull, 257000ull, + 258000ull, 259000ull, 294000ull, 295000ull, + 852000ull, 853000ull, 298000ull, 299000ull, + 260000ull, 261000ull, 262000ull, 263000ull, + 264000ull, 265000ull, 266000ull, 267000ull, + 268000ull, 269000ull, 286000ull, 287000ull, + 862000ull, 863000ull, 888000ull, 889000ull, + 270000ull, 271000ull, 272000ull, 273000ull, + 274000ull, 275000ull, 276000ull, 277000ull, + 278000ull, 279000ull, 296000ull, 297000ull, + 872000ull, 873000ull, 898000ull, 899000ull, + 300000ull, 301000ull, 302000ull, 303000ull, + 304000ull, 305000ull, 306000ull, 307000ull, + 308000ull, 309000ull, 380000ull, 381000ull, + 902000ull, 903000ull, 982000ull, 983000ull, + 310000ull, 311000ull, 312000ull, 313000ull, + 314000ull, 315000ull, 316000ull, 317000ull, + 318000ull, 319000ull, 390000ull, 391000ull, + 912000ull, 913000ull, 992000ull, 993000ull, + 320000ull, 321000ull, 322000ull, 323000ull, + 324000ull, 325000ull, 326000ull, 327000ull, + 328000ull, 329000ull, 382000ull, 383000ull, + 922000ull, 923000ull, 928000ull, 929000ull, + 330000ull, 331000ull, 332000ull, 333000ull, + 334000ull, 335000ull, 336000ull, 337000ull, + 338000ull, 339000ull, 392000ull, 393000ull, + 932000ull, 933000ull, 938000ull, 939000ull, + 340000ull, 341000ull, 342000ull, 343000ull, + 344000ull, 345000ull, 346000ull, 347000ull, + 348000ull, 349000ull, 384000ull, 385000ull, + 942000ull, 943000ull, 388000ull, 389000ull, + 350000ull, 351000ull, 352000ull, 353000ull, + 354000ull, 355000ull, 356000ull, 357000ull, + 358000ull, 359000ull, 394000ull, 395000ull, + 952000ull, 953000ull, 398000ull, 399000ull, + 360000ull, 361000ull, 362000ull, 363000ull, + 364000ull, 365000ull, 366000ull, 367000ull, + 368000ull, 369000ull, 386000ull, 387000ull, + 962000ull, 963000ull, 988000ull, 989000ull, + 370000ull, 371000ull, 372000ull, 373000ull, + 374000ull, 375000ull, 376000ull, 377000ull, + 378000ull, 379000ull, 396000ull, 397000ull, + 972000ull, 973000ull, 998000ull, 999000ull, + 400000ull, 401000ull, 402000ull, 403000ull, + 404000ull, 405000ull, 406000ull, 407000ull, + 408000ull, 409000ull, 480000ull, 481000ull, + 804000ull, 805000ull, 884000ull, 885000ull, + 410000ull, 411000ull, 412000ull, 413000ull, + 414000ull, 415000ull, 416000ull, 417000ull, + 418000ull, 419000ull, 490000ull, 491000ull, + 814000ull, 815000ull, 894000ull, 895000ull, + 420000ull, 421000ull, 422000ull, 423000ull, + 424000ull, 425000ull, 426000ull, 427000ull, + 428000ull, 429000ull, 482000ull, 483000ull, + 824000ull, 825000ull, 848000ull, 849000ull, + 430000ull, 431000ull, 432000ull, 433000ull, + 434000ull, 435000ull, 436000ull, 437000ull, + 438000ull, 439000ull, 492000ull, 493000ull, + 834000ull, 835000ull, 858000ull, 859000ull, + 440000ull, 441000ull, 442000ull, 443000ull, + 444000ull, 445000ull, 446000ull, 447000ull, + 448000ull, 449000ull, 484000ull, 485000ull, + 844000ull, 845000ull, 488000ull, 489000ull, + 450000ull, 451000ull, 452000ull, 453000ull, + 454000ull, 455000ull, 456000ull, 457000ull, + 458000ull, 459000ull, 494000ull, 495000ull, + 854000ull, 855000ull, 498000ull, 499000ull, + 460000ull, 461000ull, 462000ull, 463000ull, + 464000ull, 465000ull, 466000ull, 467000ull, + 468000ull, 469000ull, 486000ull, 487000ull, + 864000ull, 865000ull, 888000ull, 889000ull, + 470000ull, 471000ull, 472000ull, 473000ull, + 474000ull, 475000ull, 476000ull, 477000ull, + 478000ull, 479000ull, 496000ull, 497000ull, + 874000ull, 875000ull, 898000ull, 899000ull, + 500000ull, 501000ull, 502000ull, 503000ull, + 504000ull, 505000ull, 506000ull, 507000ull, + 508000ull, 509000ull, 580000ull, 581000ull, + 904000ull, 905000ull, 984000ull, 985000ull, + 510000ull, 511000ull, 512000ull, 513000ull, + 514000ull, 515000ull, 516000ull, 517000ull, + 518000ull, 519000ull, 590000ull, 591000ull, + 914000ull, 915000ull, 994000ull, 995000ull, + 520000ull, 521000ull, 522000ull, 523000ull, + 524000ull, 525000ull, 526000ull, 527000ull, + 528000ull, 529000ull, 582000ull, 583000ull, + 924000ull, 925000ull, 948000ull, 949000ull, + 530000ull, 531000ull, 532000ull, 533000ull, + 534000ull, 535000ull, 536000ull, 537000ull, + 538000ull, 539000ull, 592000ull, 593000ull, + 934000ull, 935000ull, 958000ull, 959000ull, + 540000ull, 541000ull, 542000ull, 543000ull, + 544000ull, 545000ull, 546000ull, 547000ull, + 548000ull, 549000ull, 584000ull, 585000ull, + 944000ull, 945000ull, 588000ull, 589000ull, + 550000ull, 551000ull, 552000ull, 553000ull, + 554000ull, 555000ull, 556000ull, 557000ull, + 558000ull, 559000ull, 594000ull, 595000ull, + 954000ull, 955000ull, 598000ull, 599000ull, + 560000ull, 561000ull, 562000ull, 563000ull, + 564000ull, 565000ull, 566000ull, 567000ull, + 568000ull, 569000ull, 586000ull, 587000ull, + 964000ull, 965000ull, 988000ull, 989000ull, + 570000ull, 571000ull, 572000ull, 573000ull, + 574000ull, 575000ull, 576000ull, 577000ull, + 578000ull, 579000ull, 596000ull, 597000ull, + 974000ull, 975000ull, 998000ull, 999000ull, + 600000ull, 601000ull, 602000ull, 603000ull, + 604000ull, 605000ull, 606000ull, 607000ull, + 608000ull, 609000ull, 680000ull, 681000ull, + 806000ull, 807000ull, 886000ull, 887000ull, + 610000ull, 611000ull, 612000ull, 613000ull, + 614000ull, 615000ull, 616000ull, 617000ull, + 618000ull, 619000ull, 690000ull, 691000ull, + 816000ull, 817000ull, 896000ull, 897000ull, + 620000ull, 621000ull, 622000ull, 623000ull, + 624000ull, 625000ull, 626000ull, 627000ull, + 628000ull, 629000ull, 682000ull, 683000ull, + 826000ull, 827000ull, 868000ull, 869000ull, + 630000ull, 631000ull, 632000ull, 633000ull, + 634000ull, 635000ull, 636000ull, 637000ull, + 638000ull, 639000ull, 692000ull, 693000ull, + 836000ull, 837000ull, 878000ull, 879000ull, + 640000ull, 641000ull, 642000ull, 643000ull, + 644000ull, 645000ull, 646000ull, 647000ull, + 648000ull, 649000ull, 684000ull, 685000ull, + 846000ull, 847000ull, 688000ull, 689000ull, + 650000ull, 651000ull, 652000ull, 653000ull, + 654000ull, 655000ull, 656000ull, 657000ull, + 658000ull, 659000ull, 694000ull, 695000ull, + 856000ull, 857000ull, 698000ull, 699000ull, + 660000ull, 661000ull, 662000ull, 663000ull, + 664000ull, 665000ull, 666000ull, 667000ull, + 668000ull, 669000ull, 686000ull, 687000ull, + 866000ull, 867000ull, 888000ull, 889000ull, + 670000ull, 671000ull, 672000ull, 673000ull, + 674000ull, 675000ull, 676000ull, 677000ull, + 678000ull, 679000ull, 696000ull, 697000ull, + 876000ull, 877000ull, 898000ull, 899000ull, + 700000ull, 701000ull, 702000ull, 703000ull, + 704000ull, 705000ull, 706000ull, 707000ull, + 708000ull, 709000ull, 780000ull, 781000ull, + 906000ull, 907000ull, 986000ull, 987000ull, + 710000ull, 711000ull, 712000ull, 713000ull, + 714000ull, 715000ull, 716000ull, 717000ull, + 718000ull, 719000ull, 790000ull, 791000ull, + 916000ull, 917000ull, 996000ull, 997000ull, + 720000ull, 721000ull, 722000ull, 723000ull, + 724000ull, 725000ull, 726000ull, 727000ull, + 728000ull, 729000ull, 782000ull, 783000ull, + 926000ull, 927000ull, 968000ull, 969000ull, + 730000ull, 731000ull, 732000ull, 733000ull, + 734000ull, 735000ull, 736000ull, 737000ull, + 738000ull, 739000ull, 792000ull, 793000ull, + 936000ull, 937000ull, 978000ull, 979000ull, + 740000ull, 741000ull, 742000ull, 743000ull, + 744000ull, 745000ull, 746000ull, 747000ull, + 748000ull, 749000ull, 784000ull, 785000ull, + 946000ull, 947000ull, 788000ull, 789000ull, + 750000ull, 751000ull, 752000ull, 753000ull, + 754000ull, 755000ull, 756000ull, 757000ull, + 758000ull, 759000ull, 794000ull, 795000ull, + 956000ull, 957000ull, 798000ull, 799000ull, + 760000ull, 761000ull, 762000ull, 763000ull, + 764000ull, 765000ull, 766000ull, 767000ull, + 768000ull, 769000ull, 786000ull, 787000ull, + 966000ull, 967000ull, 988000ull, 989000ull, + 770000ull, 771000ull, 772000ull, 773000ull, + 774000ull, 775000ull, 776000ull, 777000ull, + 778000ull, 779000ull, 796000ull, 797000ull, + 976000ull, 977000ull, 998000ull, 999000ull +}; + +static const UINT64 d2b3[] = { + 0000000ull, + 1000000ull, + 2000000ull, + 3000000ull, + 4000000ull, + 5000000ull, + 6000000ull, + 7000000ull, + 8000000ull, + 9000000ull, + 80000000ull, + 81000000ull, + 800000000ull, + 801000000ull, + 880000000ull, + 881000000ull, + + 10000000ull, + 11000000ull, + 12000000ull, + 13000000ull, + 14000000ull, + 15000000ull, + 16000000ull, + 17000000ull, + 18000000ull, + 19000000ull, + 90000000ull, + 91000000ull, + 810000000ull, + 811000000ull, + 890000000ull, + 891000000ull, + + 20000000ull, + 21000000ull, + 22000000ull, + 23000000ull, + 24000000ull, + 25000000ull, + 26000000ull, + 27000000ull, + 28000000ull, + 29000000ull, + 82000000ull, + 83000000ull, + 820000000ull, + 821000000ull, + 808000000ull, + 809000000ull, + + 30000000ull, + 31000000ull, + 32000000ull, + 33000000ull, + 34000000ull, + 35000000ull, + 36000000ull, + 37000000ull, + 38000000ull, + 39000000ull, + 92000000ull, + 93000000ull, + 830000000ull, + 831000000ull, + 818000000ull, + 819000000ull, + + 40000000ull, + 41000000ull, + 42000000ull, + 43000000ull, + 44000000ull, + 45000000ull, + 46000000ull, + 47000000ull, + 48000000ull, + 49000000ull, + 84000000ull, + 85000000ull, + 840000000ull, + 841000000ull, + 88000000ull, + 89000000ull, + + 50000000ull, + 51000000ull, + 52000000ull, + 53000000ull, + 54000000ull, + 55000000ull, + 56000000ull, + 57000000ull, + 58000000ull, + 59000000ull, + 94000000ull, + 95000000ull, + 850000000ull, + 851000000ull, + 98000000ull, + 99000000ull, + + 60000000ull, + 61000000ull, + 62000000ull, + 63000000ull, + 64000000ull, + 65000000ull, + 66000000ull, + 67000000ull, + 68000000ull, + 69000000ull, + 86000000ull, + 87000000ull, + 860000000ull, + 861000000ull, + 888000000ull, + 889000000ull, + + 70000000ull, + 71000000ull, + 72000000ull, + 73000000ull, + 74000000ull, + 75000000ull, + 76000000ull, + 77000000ull, + 78000000ull, + 79000000ull, + 96000000ull, + 97000000ull, + 870000000ull, + 871000000ull, + 898000000ull, + 899000000ull, + + 100000000ull, + 101000000ull, + 102000000ull, + 103000000ull, + 104000000ull, + 105000000ull, + 106000000ull, + 107000000ull, + 108000000ull, + 109000000ull, + 180000000ull, + 181000000ull, + 900000000ull, + 901000000ull, + 980000000ull, + 981000000ull, + + 110000000ull, + 111000000ull, + 112000000ull, + 113000000ull, + 114000000ull, + 115000000ull, + 116000000ull, + 117000000ull, + 118000000ull, + 119000000ull, + 190000000ull, + 191000000ull, + 910000000ull, + 911000000ull, + 990000000ull, + 991000000ull, + + 120000000ull, + 121000000ull, + 122000000ull, + 123000000ull, + 124000000ull, + 125000000ull, + 126000000ull, + 127000000ull, + 128000000ull, + 129000000ull, + 182000000ull, + 183000000ull, + 920000000ull, + 921000000ull, + 908000000ull, + 909000000ull, + + 130000000ull, + 131000000ull, + 132000000ull, + 133000000ull, + 134000000ull, + 135000000ull, + 136000000ull, + 137000000ull, + 138000000ull, + 139000000ull, + 192000000ull, + 193000000ull, + 930000000ull, + 931000000ull, + 918000000ull, + 919000000ull, + + 140000000ull, + 141000000ull, + 142000000ull, + 143000000ull, + 144000000ull, + 145000000ull, + 146000000ull, + 147000000ull, + 148000000ull, + 149000000ull, + 184000000ull, + 185000000ull, + 940000000ull, + 941000000ull, + 188000000ull, + 189000000ull, + + 150000000ull, + 151000000ull, + 152000000ull, + 153000000ull, + 154000000ull, + 155000000ull, + 156000000ull, + 157000000ull, + 158000000ull, + 159000000ull, + 194000000ull, + 195000000ull, + 950000000ull, + 951000000ull, + 198000000ull, + 199000000ull, + + 160000000ull, + 161000000ull, + 162000000ull, + 163000000ull, + 164000000ull, + 165000000ull, + 166000000ull, + 167000000ull, + 168000000ull, + 169000000ull, + 186000000ull, + 187000000ull, + 960000000ull, + 961000000ull, + 988000000ull, + 989000000ull, + + 170000000ull, + 171000000ull, + 172000000ull, + 173000000ull, + 174000000ull, + 175000000ull, + 176000000ull, + 177000000ull, + 178000000ull, + 179000000ull, + 196000000ull, + 197000000ull, + 970000000ull, + 971000000ull, + 998000000ull, + 999000000ull, + + 200000000ull, + 201000000ull, + 202000000ull, + 203000000ull, + 204000000ull, + 205000000ull, + 206000000ull, + 207000000ull, + 208000000ull, + 209000000ull, + 280000000ull, + 281000000ull, + 802000000ull, + 803000000ull, + 882000000ull, + 883000000ull, + + 210000000ull, + 211000000ull, + 212000000ull, + 213000000ull, + 214000000ull, + 215000000ull, + 216000000ull, + 217000000ull, + 218000000ull, + 219000000ull, + 290000000ull, + 291000000ull, + 812000000ull, + 813000000ull, + 892000000ull, + 893000000ull, + + 220000000ull, + 221000000ull, + 222000000ull, + 223000000ull, + 224000000ull, + 225000000ull, + 226000000ull, + 227000000ull, + 228000000ull, + 229000000ull, + 282000000ull, + 283000000ull, + 822000000ull, + 823000000ull, + 828000000ull, + 829000000ull, + + 230000000ull, + 231000000ull, + 232000000ull, + 233000000ull, + 234000000ull, + 235000000ull, + 236000000ull, + 237000000ull, + 238000000ull, + 239000000ull, + 292000000ull, + 293000000ull, + 832000000ull, + 833000000ull, + 838000000ull, + 839000000ull, + + 240000000ull, + 241000000ull, + 242000000ull, + 243000000ull, + 244000000ull, + 245000000ull, + 246000000ull, + 247000000ull, + 248000000ull, + 249000000ull, + 284000000ull, + 285000000ull, + 842000000ull, + 843000000ull, + 288000000ull, + 289000000ull, + + 250000000ull, + 251000000ull, + 252000000ull, + 253000000ull, + 254000000ull, + 255000000ull, + 256000000ull, + 257000000ull, + 258000000ull, + 259000000ull, + 294000000ull, + 295000000ull, + 852000000ull, + 853000000ull, + 298000000ull, + 299000000ull, + + 260000000ull, + 261000000ull, + 262000000ull, + 263000000ull, + 264000000ull, + 265000000ull, + 266000000ull, + 267000000ull, + 268000000ull, + 269000000ull, + 286000000ull, + 287000000ull, + 862000000ull, + 863000000ull, + 888000000ull, + 889000000ull, + + 270000000ull, + 271000000ull, + 272000000ull, + 273000000ull, + 274000000ull, + 275000000ull, + 276000000ull, + 277000000ull, + 278000000ull, + 279000000ull, + 296000000ull, + 297000000ull, + 872000000ull, + 873000000ull, + 898000000ull, + 899000000ull, + + 300000000ull, + 301000000ull, + 302000000ull, + 303000000ull, + 304000000ull, + 305000000ull, + 306000000ull, + 307000000ull, + 308000000ull, + 309000000ull, + 380000000ull, + 381000000ull, + 902000000ull, + 903000000ull, + 982000000ull, + 983000000ull, + + 310000000ull, + 311000000ull, + 312000000ull, + 313000000ull, + 314000000ull, + 315000000ull, + 316000000ull, + 317000000ull, + 318000000ull, + 319000000ull, + 390000000ull, + 391000000ull, + 912000000ull, + 913000000ull, + 992000000ull, + 993000000ull, + + 320000000ull, + 321000000ull, + 322000000ull, + 323000000ull, + 324000000ull, + 325000000ull, + 326000000ull, + 327000000ull, + 328000000ull, + 329000000ull, + 382000000ull, + 383000000ull, + 922000000ull, + 923000000ull, + 928000000ull, + 929000000ull, + + 330000000ull, + 331000000ull, + 332000000ull, + 333000000ull, + 334000000ull, + 335000000ull, + 336000000ull, + 337000000ull, + 338000000ull, + 339000000ull, + 392000000ull, + 393000000ull, + 932000000ull, + 933000000ull, + 938000000ull, + 939000000ull, + + 340000000ull, + 341000000ull, + 342000000ull, + 343000000ull, + 344000000ull, + 345000000ull, + 346000000ull, + 347000000ull, + 348000000ull, + 349000000ull, + 384000000ull, + 385000000ull, + 942000000ull, + 943000000ull, + 388000000ull, + 389000000ull, + + 350000000ull, + 351000000ull, + 352000000ull, + 353000000ull, + 354000000ull, + 355000000ull, + 356000000ull, + 357000000ull, + 358000000ull, + 359000000ull, + 394000000ull, + 395000000ull, + 952000000ull, + 953000000ull, + 398000000ull, + 399000000ull, + + 360000000ull, + 361000000ull, + 362000000ull, + 363000000ull, + 364000000ull, + 365000000ull, + 366000000ull, + 367000000ull, + 368000000ull, + 369000000ull, + 386000000ull, + 387000000ull, + 962000000ull, + 963000000ull, + 988000000ull, + 989000000ull, + + 370000000ull, + 371000000ull, + 372000000ull, + 373000000ull, + 374000000ull, + 375000000ull, + 376000000ull, + 377000000ull, + 378000000ull, + 379000000ull, + 396000000ull, + 397000000ull, + 972000000ull, + 973000000ull, + 998000000ull, + 999000000ull, + + 400000000ull, + 401000000ull, + 402000000ull, + 403000000ull, + 404000000ull, + 405000000ull, + 406000000ull, + 407000000ull, + 408000000ull, + 409000000ull, + 480000000ull, + 481000000ull, + 804000000ull, + 805000000ull, + 884000000ull, + 885000000ull, + + 410000000ull, + 411000000ull, + 412000000ull, + 413000000ull, + 414000000ull, + 415000000ull, + 416000000ull, + 417000000ull, + 418000000ull, + 419000000ull, + 490000000ull, + 491000000ull, + 814000000ull, + 815000000ull, + 894000000ull, + 895000000ull, + + 420000000ull, + 421000000ull, + 422000000ull, + 423000000ull, + 424000000ull, + 425000000ull, + 426000000ull, + 427000000ull, + 428000000ull, + 429000000ull, + 482000000ull, + 483000000ull, + 824000000ull, + 825000000ull, + 848000000ull, + 849000000ull, + + 430000000ull, + 431000000ull, + 432000000ull, + 433000000ull, + 434000000ull, + 435000000ull, + 436000000ull, + 437000000ull, + 438000000ull, + 439000000ull, + 492000000ull, + 493000000ull, + 834000000ull, + 835000000ull, + 858000000ull, + 859000000ull, + + 440000000ull, + 441000000ull, + 442000000ull, + 443000000ull, + 444000000ull, + 445000000ull, + 446000000ull, + 447000000ull, + 448000000ull, + 449000000ull, + 484000000ull, + 485000000ull, + 844000000ull, + 845000000ull, + 488000000ull, + 489000000ull, + + 450000000ull, + 451000000ull, + 452000000ull, + 453000000ull, + 454000000ull, + 455000000ull, + 456000000ull, + 457000000ull, + 458000000ull, + 459000000ull, + 494000000ull, + 495000000ull, + 854000000ull, + 855000000ull, + 498000000ull, + 499000000ull, + + 460000000ull, + 461000000ull, + 462000000ull, + 463000000ull, + 464000000ull, + 465000000ull, + 466000000ull, + 467000000ull, + 468000000ull, + 469000000ull, + 486000000ull, + 487000000ull, + 864000000ull, + 865000000ull, + 888000000ull, + 889000000ull, + + 470000000ull, + 471000000ull, + 472000000ull, + 473000000ull, + 474000000ull, + 475000000ull, + 476000000ull, + 477000000ull, + 478000000ull, + 479000000ull, + 496000000ull, + 497000000ull, + 874000000ull, + 875000000ull, + 898000000ull, + 899000000ull, + + 500000000ull, + 501000000ull, + 502000000ull, + 503000000ull, + 504000000ull, + 505000000ull, + 506000000ull, + 507000000ull, + 508000000ull, + 509000000ull, + 580000000ull, + 581000000ull, + 904000000ull, + 905000000ull, + 984000000ull, + 985000000ull, + + 510000000ull, + 511000000ull, + 512000000ull, + 513000000ull, + 514000000ull, + 515000000ull, + 516000000ull, + 517000000ull, + 518000000ull, + 519000000ull, + 590000000ull, + 591000000ull, + 914000000ull, + 915000000ull, + 994000000ull, + 995000000ull, + + 520000000ull, + 521000000ull, + 522000000ull, + 523000000ull, + 524000000ull, + 525000000ull, + 526000000ull, + 527000000ull, + 528000000ull, + 529000000ull, + 582000000ull, + 583000000ull, + 924000000ull, + 925000000ull, + 948000000ull, + 949000000ull, + + 530000000ull, + 531000000ull, + 532000000ull, + 533000000ull, + 534000000ull, + 535000000ull, + 536000000ull, + 537000000ull, + 538000000ull, + 539000000ull, + 592000000ull, + 593000000ull, + 934000000ull, + 935000000ull, + 958000000ull, + 959000000ull, + + 540000000ull, + 541000000ull, + 542000000ull, + 543000000ull, + 544000000ull, + 545000000ull, + 546000000ull, + 547000000ull, + 548000000ull, + 549000000ull, + 584000000ull, + 585000000ull, + 944000000ull, + 945000000ull, + 588000000ull, + 589000000ull, + + 550000000ull, + 551000000ull, + 552000000ull, + 553000000ull, + 554000000ull, + 555000000ull, + 556000000ull, + 557000000ull, + 558000000ull, + 559000000ull, + 594000000ull, + 595000000ull, + 954000000ull, + 955000000ull, + 598000000ull, + 599000000ull, + + 560000000ull, + 561000000ull, + 562000000ull, + 563000000ull, + 564000000ull, + 565000000ull, + 566000000ull, + 567000000ull, + 568000000ull, + 569000000ull, + 586000000ull, + 587000000ull, + 964000000ull, + 965000000ull, + 988000000ull, + 989000000ull, + + 570000000ull, + 571000000ull, + 572000000ull, + 573000000ull, + 574000000ull, + 575000000ull, + 576000000ull, + 577000000ull, + 578000000ull, + 579000000ull, + 596000000ull, + 597000000ull, + 974000000ull, + 975000000ull, + 998000000ull, + 999000000ull, + + 600000000ull, + 601000000ull, + 602000000ull, + 603000000ull, + 604000000ull, + 605000000ull, + 606000000ull, + 607000000ull, + 608000000ull, + 609000000ull, + 680000000ull, + 681000000ull, + 806000000ull, + 807000000ull, + 886000000ull, + 887000000ull, + + 610000000ull, + 611000000ull, + 612000000ull, + 613000000ull, + 614000000ull, + 615000000ull, + 616000000ull, + 617000000ull, + 618000000ull, + 619000000ull, + 690000000ull, + 691000000ull, + 816000000ull, + 817000000ull, + 896000000ull, + 897000000ull, + + 620000000ull, + 621000000ull, + 622000000ull, + 623000000ull, + 624000000ull, + 625000000ull, + 626000000ull, + 627000000ull, + 628000000ull, + 629000000ull, + 682000000ull, + 683000000ull, + 826000000ull, + 827000000ull, + 868000000ull, + 869000000ull, + + 630000000ull, + 631000000ull, + 632000000ull, + 633000000ull, + 634000000ull, + 635000000ull, + 636000000ull, + 637000000ull, + 638000000ull, + 639000000ull, + 692000000ull, + 693000000ull, + 836000000ull, + 837000000ull, + 878000000ull, + 879000000ull, + + 640000000ull, + 641000000ull, + 642000000ull, + 643000000ull, + 644000000ull, + 645000000ull, + 646000000ull, + 647000000ull, + 648000000ull, + 649000000ull, + 684000000ull, + 685000000ull, + 846000000ull, + 847000000ull, + 688000000ull, + 689000000ull, + + 650000000ull, + 651000000ull, + 652000000ull, + 653000000ull, + 654000000ull, + 655000000ull, + 656000000ull, + 657000000ull, + 658000000ull, + 659000000ull, + 694000000ull, + 695000000ull, + 856000000ull, + 857000000ull, + 698000000ull, + 699000000ull, + + 660000000ull, + 661000000ull, + 662000000ull, + 663000000ull, + 664000000ull, + 665000000ull, + 666000000ull, + 667000000ull, + 668000000ull, + 669000000ull, + 686000000ull, + 687000000ull, + 866000000ull, + 867000000ull, + 888000000ull, + 889000000ull, + + 670000000ull, + 671000000ull, + 672000000ull, + 673000000ull, + 674000000ull, + 675000000ull, + 676000000ull, + 677000000ull, + 678000000ull, + 679000000ull, + 696000000ull, + 697000000ull, + 876000000ull, + 877000000ull, + 898000000ull, + 899000000ull, + + 700000000ull, + 701000000ull, + 702000000ull, + 703000000ull, + 704000000ull, + 705000000ull, + 706000000ull, + 707000000ull, + 708000000ull, + 709000000ull, + 780000000ull, + 781000000ull, + 906000000ull, + 907000000ull, + 986000000ull, + 987000000ull, + + 710000000ull, + 711000000ull, + 712000000ull, + 713000000ull, + 714000000ull, + 715000000ull, + 716000000ull, + 717000000ull, + 718000000ull, + 719000000ull, + 790000000ull, + 791000000ull, + 916000000ull, + 917000000ull, + 996000000ull, + 997000000ull, + + 720000000ull, + 721000000ull, + 722000000ull, + 723000000ull, + 724000000ull, + 725000000ull, + 726000000ull, + 727000000ull, + 728000000ull, + 729000000ull, + 782000000ull, + 783000000ull, + 926000000ull, + 927000000ull, + 968000000ull, + 969000000ull, + + 730000000ull, + 731000000ull, + 732000000ull, + 733000000ull, + 734000000ull, + 735000000ull, + 736000000ull, + 737000000ull, + 738000000ull, + 739000000ull, + 792000000ull, + 793000000ull, + 936000000ull, + 937000000ull, + 978000000ull, + 979000000ull, + + 740000000ull, + 741000000ull, + 742000000ull, + 743000000ull, + 744000000ull, + 745000000ull, + 746000000ull, + 747000000ull, + 748000000ull, + 749000000ull, + 784000000ull, + 785000000ull, + 946000000ull, + 947000000ull, + 788000000ull, + 789000000ull, + + 750000000ull, + 751000000ull, + 752000000ull, + 753000000ull, + 754000000ull, + 755000000ull, + 756000000ull, + 757000000ull, + 758000000ull, + 759000000ull, + 794000000ull, + 795000000ull, + 956000000ull, + 957000000ull, + 798000000ull, + 799000000ull, + + 760000000ull, + 761000000ull, + 762000000ull, + 763000000ull, + 764000000ull, + 765000000ull, + 766000000ull, + 767000000ull, + 768000000ull, + 769000000ull, + 786000000ull, + 787000000ull, + 966000000ull, + 967000000ull, + 988000000ull, + 989000000ull, + + 770000000ull, + 771000000ull, + 772000000ull, + 773000000ull, + 774000000ull, + 775000000ull, + 776000000ull, + 777000000ull, + 778000000ull, + 779000000ull, + 796000000ull, + 797000000ull, + 976000000ull, + 977000000ull, + 998000000ull, + 999000000ull }; + +static const UINT64 d2b4[] = { + 0000000000ull, + 1000000000ull, + 2000000000ull, + 3000000000ull, + 4000000000ull, + 5000000000ull, + 6000000000ull, + 7000000000ull, + 8000000000ull, + 9000000000ull, + 80000000000ull, + 81000000000ull, + 800000000000ull, + 801000000000ull, + 880000000000ull, + 881000000000ull, + + 10000000000ull, + 11000000000ull, + 12000000000ull, + 13000000000ull, + 14000000000ull, + 15000000000ull, + 16000000000ull, + 17000000000ull, + 18000000000ull, + 19000000000ull, + 90000000000ull, + 91000000000ull, + 810000000000ull, + 811000000000ull, + 890000000000ull, + 891000000000ull, + + 20000000000ull, + 21000000000ull, + 22000000000ull, + 23000000000ull, + 24000000000ull, + 25000000000ull, + 26000000000ull, + 27000000000ull, + 28000000000ull, + 29000000000ull, + 82000000000ull, + 83000000000ull, + 820000000000ull, + 821000000000ull, + 808000000000ull, + 809000000000ull, + + 30000000000ull, + 31000000000ull, + 32000000000ull, + 33000000000ull, + 34000000000ull, + 35000000000ull, + 36000000000ull, + 37000000000ull, + 38000000000ull, + 39000000000ull, + 92000000000ull, + 93000000000ull, + 830000000000ull, + 831000000000ull, + 818000000000ull, + 819000000000ull, + + 40000000000ull, + 41000000000ull, + 42000000000ull, + 43000000000ull, + 44000000000ull, + 45000000000ull, + 46000000000ull, + 47000000000ull, + 48000000000ull, + 49000000000ull, + 84000000000ull, + 85000000000ull, + 840000000000ull, + 841000000000ull, + 88000000000ull, + 89000000000ull, + + 50000000000ull, + 51000000000ull, + 52000000000ull, + 53000000000ull, + 54000000000ull, + 55000000000ull, + 56000000000ull, + 57000000000ull, + 58000000000ull, + 59000000000ull, + 94000000000ull, + 95000000000ull, + 850000000000ull, + 851000000000ull, + 98000000000ull, + 99000000000ull, + + 60000000000ull, + 61000000000ull, + 62000000000ull, + 63000000000ull, + 64000000000ull, + 65000000000ull, + 66000000000ull, + 67000000000ull, + 68000000000ull, + 69000000000ull, + 86000000000ull, + 87000000000ull, + 860000000000ull, + 861000000000ull, + 888000000000ull, + 889000000000ull, + + 70000000000ull, + 71000000000ull, + 72000000000ull, + 73000000000ull, + 74000000000ull, + 75000000000ull, + 76000000000ull, + 77000000000ull, + 78000000000ull, + 79000000000ull, + 96000000000ull, + 97000000000ull, + 870000000000ull, + 871000000000ull, + 898000000000ull, + 899000000000ull, + + 100000000000ull, + 101000000000ull, + 102000000000ull, + 103000000000ull, + 104000000000ull, + 105000000000ull, + 106000000000ull, + 107000000000ull, + 108000000000ull, + 109000000000ull, + 180000000000ull, + 181000000000ull, + 900000000000ull, + 901000000000ull, + 980000000000ull, + 981000000000ull, + + 110000000000ull, + 111000000000ull, + 112000000000ull, + 113000000000ull, + 114000000000ull, + 115000000000ull, + 116000000000ull, + 117000000000ull, + 118000000000ull, + 119000000000ull, + 190000000000ull, + 191000000000ull, + 910000000000ull, + 911000000000ull, + 990000000000ull, + 991000000000ull, + + 120000000000ull, + 121000000000ull, + 122000000000ull, + 123000000000ull, + 124000000000ull, + 125000000000ull, + 126000000000ull, + 127000000000ull, + 128000000000ull, + 129000000000ull, + 182000000000ull, + 183000000000ull, + 920000000000ull, + 921000000000ull, + 908000000000ull, + 909000000000ull, + + 130000000000ull, + 131000000000ull, + 132000000000ull, + 133000000000ull, + 134000000000ull, + 135000000000ull, + 136000000000ull, + 137000000000ull, + 138000000000ull, + 139000000000ull, + 192000000000ull, + 193000000000ull, + 930000000000ull, + 931000000000ull, + 918000000000ull, + 919000000000ull, + + 140000000000ull, + 141000000000ull, + 142000000000ull, + 143000000000ull, + 144000000000ull, + 145000000000ull, + 146000000000ull, + 147000000000ull, + 148000000000ull, + 149000000000ull, + 184000000000ull, + 185000000000ull, + 940000000000ull, + 941000000000ull, + 188000000000ull, + 189000000000ull, + + 150000000000ull, + 151000000000ull, + 152000000000ull, + 153000000000ull, + 154000000000ull, + 155000000000ull, + 156000000000ull, + 157000000000ull, + 158000000000ull, + 159000000000ull, + 194000000000ull, + 195000000000ull, + 950000000000ull, + 951000000000ull, + 198000000000ull, + 199000000000ull, + + 160000000000ull, + 161000000000ull, + 162000000000ull, + 163000000000ull, + 164000000000ull, + 165000000000ull, + 166000000000ull, + 167000000000ull, + 168000000000ull, + 169000000000ull, + 186000000000ull, + 187000000000ull, + 960000000000ull, + 961000000000ull, + 988000000000ull, + 989000000000ull, + + 170000000000ull, + 171000000000ull, + 172000000000ull, + 173000000000ull, + 174000000000ull, + 175000000000ull, + 176000000000ull, + 177000000000ull, + 178000000000ull, + 179000000000ull, + 196000000000ull, + 197000000000ull, + 970000000000ull, + 971000000000ull, + 998000000000ull, + 999000000000ull, + + 200000000000ull, + 201000000000ull, + 202000000000ull, + 203000000000ull, + 204000000000ull, + 205000000000ull, + 206000000000ull, + 207000000000ull, + 208000000000ull, + 209000000000ull, + 280000000000ull, + 281000000000ull, + 802000000000ull, + 803000000000ull, + 882000000000ull, + 883000000000ull, + + 210000000000ull, + 211000000000ull, + 212000000000ull, + 213000000000ull, + 214000000000ull, + 215000000000ull, + 216000000000ull, + 217000000000ull, + 218000000000ull, + 219000000000ull, + 290000000000ull, + 291000000000ull, + 812000000000ull, + 813000000000ull, + 892000000000ull, + 893000000000ull, + + 220000000000ull, + 221000000000ull, + 222000000000ull, + 223000000000ull, + 224000000000ull, + 225000000000ull, + 226000000000ull, + 227000000000ull, + 228000000000ull, + 229000000000ull, + 282000000000ull, + 283000000000ull, + 822000000000ull, + 823000000000ull, + 828000000000ull, + 829000000000ull, + + 230000000000ull, + 231000000000ull, + 232000000000ull, + 233000000000ull, + 234000000000ull, + 235000000000ull, + 236000000000ull, + 237000000000ull, + 238000000000ull, + 239000000000ull, + 292000000000ull, + 293000000000ull, + 832000000000ull, + 833000000000ull, + 838000000000ull, + 839000000000ull, + + 240000000000ull, + 241000000000ull, + 242000000000ull, + 243000000000ull, + 244000000000ull, + 245000000000ull, + 246000000000ull, + 247000000000ull, + 248000000000ull, + 249000000000ull, + 284000000000ull, + 285000000000ull, + 842000000000ull, + 843000000000ull, + 288000000000ull, + 289000000000ull, + + 250000000000ull, + 251000000000ull, + 252000000000ull, + 253000000000ull, + 254000000000ull, + 255000000000ull, + 256000000000ull, + 257000000000ull, + 258000000000ull, + 259000000000ull, + 294000000000ull, + 295000000000ull, + 852000000000ull, + 853000000000ull, + 298000000000ull, + 299000000000ull, + + 260000000000ull, + 261000000000ull, + 262000000000ull, + 263000000000ull, + 264000000000ull, + 265000000000ull, + 266000000000ull, + 267000000000ull, + 268000000000ull, + 269000000000ull, + 286000000000ull, + 287000000000ull, + 862000000000ull, + 863000000000ull, + 888000000000ull, + 889000000000ull, + + 270000000000ull, + 271000000000ull, + 272000000000ull, + 273000000000ull, + 274000000000ull, + 275000000000ull, + 276000000000ull, + 277000000000ull, + 278000000000ull, + 279000000000ull, + 296000000000ull, + 297000000000ull, + 872000000000ull, + 873000000000ull, + 898000000000ull, + 899000000000ull, + + 300000000000ull, + 301000000000ull, + 302000000000ull, + 303000000000ull, + 304000000000ull, + 305000000000ull, + 306000000000ull, + 307000000000ull, + 308000000000ull, + 309000000000ull, + 380000000000ull, + 381000000000ull, + 902000000000ull, + 903000000000ull, + 982000000000ull, + 983000000000ull, + + 310000000000ull, + 311000000000ull, + 312000000000ull, + 313000000000ull, + 314000000000ull, + 315000000000ull, + 316000000000ull, + 317000000000ull, + 318000000000ull, + 319000000000ull, + 390000000000ull, + 391000000000ull, + 912000000000ull, + 913000000000ull, + 992000000000ull, + 993000000000ull, + + 320000000000ull, + 321000000000ull, + 322000000000ull, + 323000000000ull, + 324000000000ull, + 325000000000ull, + 326000000000ull, + 327000000000ull, + 328000000000ull, + 329000000000ull, + 382000000000ull, + 383000000000ull, + 922000000000ull, + 923000000000ull, + 928000000000ull, + 929000000000ull, + + 330000000000ull, + 331000000000ull, + 332000000000ull, + 333000000000ull, + 334000000000ull, + 335000000000ull, + 336000000000ull, + 337000000000ull, + 338000000000ull, + 339000000000ull, + 392000000000ull, + 393000000000ull, + 932000000000ull, + 933000000000ull, + 938000000000ull, + 939000000000ull, + + 340000000000ull, + 341000000000ull, + 342000000000ull, + 343000000000ull, + 344000000000ull, + 345000000000ull, + 346000000000ull, + 347000000000ull, + 348000000000ull, + 349000000000ull, + 384000000000ull, + 385000000000ull, + 942000000000ull, + 943000000000ull, + 388000000000ull, + 389000000000ull, + + 350000000000ull, + 351000000000ull, + 352000000000ull, + 353000000000ull, + 354000000000ull, + 355000000000ull, + 356000000000ull, + 357000000000ull, + 358000000000ull, + 359000000000ull, + 394000000000ull, + 395000000000ull, + 952000000000ull, + 953000000000ull, + 398000000000ull, + 399000000000ull, + + 360000000000ull, + 361000000000ull, + 362000000000ull, + 363000000000ull, + 364000000000ull, + 365000000000ull, + 366000000000ull, + 367000000000ull, + 368000000000ull, + 369000000000ull, + 386000000000ull, + 387000000000ull, + 962000000000ull, + 963000000000ull, + 988000000000ull, + 989000000000ull, + + 370000000000ull, + 371000000000ull, + 372000000000ull, + 373000000000ull, + 374000000000ull, + 375000000000ull, + 376000000000ull, + 377000000000ull, + 378000000000ull, + 379000000000ull, + 396000000000ull, + 397000000000ull, + 972000000000ull, + 973000000000ull, + 998000000000ull, + 999000000000ull, + + 400000000000ull, + 401000000000ull, + 402000000000ull, + 403000000000ull, + 404000000000ull, + 405000000000ull, + 406000000000ull, + 407000000000ull, + 408000000000ull, + 409000000000ull, + 480000000000ull, + 481000000000ull, + 804000000000ull, + 805000000000ull, + 884000000000ull, + 885000000000ull, + + 410000000000ull, + 411000000000ull, + 412000000000ull, + 413000000000ull, + 414000000000ull, + 415000000000ull, + 416000000000ull, + 417000000000ull, + 418000000000ull, + 419000000000ull, + 490000000000ull, + 491000000000ull, + 814000000000ull, + 815000000000ull, + 894000000000ull, + 895000000000ull, + + 420000000000ull, + 421000000000ull, + 422000000000ull, + 423000000000ull, + 424000000000ull, + 425000000000ull, + 426000000000ull, + 427000000000ull, + 428000000000ull, + 429000000000ull, + 482000000000ull, + 483000000000ull, + 824000000000ull, + 825000000000ull, + 848000000000ull, + 849000000000ull, + + 430000000000ull, + 431000000000ull, + 432000000000ull, + 433000000000ull, + 434000000000ull, + 435000000000ull, + 436000000000ull, + 437000000000ull, + 438000000000ull, + 439000000000ull, + 492000000000ull, + 493000000000ull, + 834000000000ull, + 835000000000ull, + 858000000000ull, + 859000000000ull, + + 440000000000ull, + 441000000000ull, + 442000000000ull, + 443000000000ull, + 444000000000ull, + 445000000000ull, + 446000000000ull, + 447000000000ull, + 448000000000ull, + 449000000000ull, + 484000000000ull, + 485000000000ull, + 844000000000ull, + 845000000000ull, + 488000000000ull, + 489000000000ull, + + 450000000000ull, + 451000000000ull, + 452000000000ull, + 453000000000ull, + 454000000000ull, + 455000000000ull, + 456000000000ull, + 457000000000ull, + 458000000000ull, + 459000000000ull, + 494000000000ull, + 495000000000ull, + 854000000000ull, + 855000000000ull, + 498000000000ull, + 499000000000ull, + + 460000000000ull, + 461000000000ull, + 462000000000ull, + 463000000000ull, + 464000000000ull, + 465000000000ull, + 466000000000ull, + 467000000000ull, + 468000000000ull, + 469000000000ull, + 486000000000ull, + 487000000000ull, + 864000000000ull, + 865000000000ull, + 888000000000ull, + 889000000000ull, + + 470000000000ull, + 471000000000ull, + 472000000000ull, + 473000000000ull, + 474000000000ull, + 475000000000ull, + 476000000000ull, + 477000000000ull, + 478000000000ull, + 479000000000ull, + 496000000000ull, + 497000000000ull, + 874000000000ull, + 875000000000ull, + 898000000000ull, + 899000000000ull, + + 500000000000ull, + 501000000000ull, + 502000000000ull, + 503000000000ull, + 504000000000ull, + 505000000000ull, + 506000000000ull, + 507000000000ull, + 508000000000ull, + 509000000000ull, + 580000000000ull, + 581000000000ull, + 904000000000ull, + 905000000000ull, + 984000000000ull, + 985000000000ull, + + 510000000000ull, + 511000000000ull, + 512000000000ull, + 513000000000ull, + 514000000000ull, + 515000000000ull, + 516000000000ull, + 517000000000ull, + 518000000000ull, + 519000000000ull, + 590000000000ull, + 591000000000ull, + 914000000000ull, + 915000000000ull, + 994000000000ull, + 995000000000ull, + + 520000000000ull, + 521000000000ull, + 522000000000ull, + 523000000000ull, + 524000000000ull, + 525000000000ull, + 526000000000ull, + 527000000000ull, + 528000000000ull, + 529000000000ull, + 582000000000ull, + 583000000000ull, + 924000000000ull, + 925000000000ull, + 948000000000ull, + 949000000000ull, + + 530000000000ull, + 531000000000ull, + 532000000000ull, + 533000000000ull, + 534000000000ull, + 535000000000ull, + 536000000000ull, + 537000000000ull, + 538000000000ull, + 539000000000ull, + 592000000000ull, + 593000000000ull, + 934000000000ull, + 935000000000ull, + 958000000000ull, + 959000000000ull, + + 540000000000ull, + 541000000000ull, + 542000000000ull, + 543000000000ull, + 544000000000ull, + 545000000000ull, + 546000000000ull, + 547000000000ull, + 548000000000ull, + 549000000000ull, + 584000000000ull, + 585000000000ull, + 944000000000ull, + 945000000000ull, + 588000000000ull, + 589000000000ull, + + 550000000000ull, + 551000000000ull, + 552000000000ull, + 553000000000ull, + 554000000000ull, + 555000000000ull, + 556000000000ull, + 557000000000ull, + 558000000000ull, + 559000000000ull, + 594000000000ull, + 595000000000ull, + 954000000000ull, + 955000000000ull, + 598000000000ull, + 599000000000ull, + + 560000000000ull, + 561000000000ull, + 562000000000ull, + 563000000000ull, + 564000000000ull, + 565000000000ull, + 566000000000ull, + 567000000000ull, + 568000000000ull, + 569000000000ull, + 586000000000ull, + 587000000000ull, + 964000000000ull, + 965000000000ull, + 988000000000ull, + 989000000000ull, + + 570000000000ull, + 571000000000ull, + 572000000000ull, + 573000000000ull, + 574000000000ull, + 575000000000ull, + 576000000000ull, + 577000000000ull, + 578000000000ull, + 579000000000ull, + 596000000000ull, + 597000000000ull, + 974000000000ull, + 975000000000ull, + 998000000000ull, + 999000000000ull, + + 600000000000ull, + 601000000000ull, + 602000000000ull, + 603000000000ull, + 604000000000ull, + 605000000000ull, + 606000000000ull, + 607000000000ull, + 608000000000ull, + 609000000000ull, + 680000000000ull, + 681000000000ull, + 806000000000ull, + 807000000000ull, + 886000000000ull, + 887000000000ull, + + 610000000000ull, + 611000000000ull, + 612000000000ull, + 613000000000ull, + 614000000000ull, + 615000000000ull, + 616000000000ull, + 617000000000ull, + 618000000000ull, + 619000000000ull, + 690000000000ull, + 691000000000ull, + 816000000000ull, + 817000000000ull, + 896000000000ull, + 897000000000ull, + + 620000000000ull, + 621000000000ull, + 622000000000ull, + 623000000000ull, + 624000000000ull, + 625000000000ull, + 626000000000ull, + 627000000000ull, + 628000000000ull, + 629000000000ull, + 682000000000ull, + 683000000000ull, + 826000000000ull, + 827000000000ull, + 868000000000ull, + 869000000000ull, + + 630000000000ull, + 631000000000ull, + 632000000000ull, + 633000000000ull, + 634000000000ull, + 635000000000ull, + 636000000000ull, + 637000000000ull, + 638000000000ull, + 639000000000ull, + 692000000000ull, + 693000000000ull, + 836000000000ull, + 837000000000ull, + 878000000000ull, + 879000000000ull, + + 640000000000ull, + 641000000000ull, + 642000000000ull, + 643000000000ull, + 644000000000ull, + 645000000000ull, + 646000000000ull, + 647000000000ull, + 648000000000ull, + 649000000000ull, + 684000000000ull, + 685000000000ull, + 846000000000ull, + 847000000000ull, + 688000000000ull, + 689000000000ull, + + 650000000000ull, + 651000000000ull, + 652000000000ull, + 653000000000ull, + 654000000000ull, + 655000000000ull, + 656000000000ull, + 657000000000ull, + 658000000000ull, + 659000000000ull, + 694000000000ull, + 695000000000ull, + 856000000000ull, + 857000000000ull, + 698000000000ull, + 699000000000ull, + + 660000000000ull, + 661000000000ull, + 662000000000ull, + 663000000000ull, + 664000000000ull, + 665000000000ull, + 666000000000ull, + 667000000000ull, + 668000000000ull, + 669000000000ull, + 686000000000ull, + 687000000000ull, + 866000000000ull, + 867000000000ull, + 888000000000ull, + 889000000000ull, + + 670000000000ull, + 671000000000ull, + 672000000000ull, + 673000000000ull, + 674000000000ull, + 675000000000ull, + 676000000000ull, + 677000000000ull, + 678000000000ull, + 679000000000ull, + 696000000000ull, + 697000000000ull, + 876000000000ull, + 877000000000ull, + 898000000000ull, + 899000000000ull, + + 700000000000ull, + 701000000000ull, + 702000000000ull, + 703000000000ull, + 704000000000ull, + 705000000000ull, + 706000000000ull, + 707000000000ull, + 708000000000ull, + 709000000000ull, + 780000000000ull, + 781000000000ull, + 906000000000ull, + 907000000000ull, + 986000000000ull, + 987000000000ull, + + 710000000000ull, + 711000000000ull, + 712000000000ull, + 713000000000ull, + 714000000000ull, + 715000000000ull, + 716000000000ull, + 717000000000ull, + 718000000000ull, + 719000000000ull, + 790000000000ull, + 791000000000ull, + 916000000000ull, + 917000000000ull, + 996000000000ull, + 997000000000ull, + + 720000000000ull, + 721000000000ull, + 722000000000ull, + 723000000000ull, + 724000000000ull, + 725000000000ull, + 726000000000ull, + 727000000000ull, + 728000000000ull, + 729000000000ull, + 782000000000ull, + 783000000000ull, + 926000000000ull, + 927000000000ull, + 968000000000ull, + 969000000000ull, + + 730000000000ull, + 731000000000ull, + 732000000000ull, + 733000000000ull, + 734000000000ull, + 735000000000ull, + 736000000000ull, + 737000000000ull, + 738000000000ull, + 739000000000ull, + 792000000000ull, + 793000000000ull, + 936000000000ull, + 937000000000ull, + 978000000000ull, + 979000000000ull, + + 740000000000ull, + 741000000000ull, + 742000000000ull, + 743000000000ull, + 744000000000ull, + 745000000000ull, + 746000000000ull, + 747000000000ull, + 748000000000ull, + 749000000000ull, + 784000000000ull, + 785000000000ull, + 946000000000ull, + 947000000000ull, + 788000000000ull, + 789000000000ull, + + 750000000000ull, + 751000000000ull, + 752000000000ull, + 753000000000ull, + 754000000000ull, + 755000000000ull, + 756000000000ull, + 757000000000ull, + 758000000000ull, + 759000000000ull, + 794000000000ull, + 795000000000ull, + 956000000000ull, + 957000000000ull, + 798000000000ull, + 799000000000ull, + + 760000000000ull, + 761000000000ull, + 762000000000ull, + 763000000000ull, + 764000000000ull, + 765000000000ull, + 766000000000ull, + 767000000000ull, + 768000000000ull, + 769000000000ull, + 786000000000ull, + 787000000000ull, + 966000000000ull, + 967000000000ull, + 988000000000ull, + 989000000000ull, + + 770000000000ull, + 771000000000ull, + 772000000000ull, + 773000000000ull, + 774000000000ull, + 775000000000ull, + 776000000000ull, + 777000000000ull, + 778000000000ull, + 779000000000ull, + 796000000000ull, + 797000000000ull, + 976000000000ull, + 977000000000ull, + 998000000000ull, + 999000000000ull +}; + +static const UINT64 d2b5[] = { + 0000000000000ull, + 1000000000000ull, + 2000000000000ull, + 3000000000000ull, + 4000000000000ull, + 5000000000000ull, + 6000000000000ull, + 7000000000000ull, + 8000000000000ull, + 9000000000000ull, + 80000000000000ull, + 81000000000000ull, + 800000000000000ull, + 801000000000000ull, + 880000000000000ull, + 881000000000000ull, + + 10000000000000ull, + 11000000000000ull, + 12000000000000ull, + 13000000000000ull, + 14000000000000ull, + 15000000000000ull, + 16000000000000ull, + 17000000000000ull, + 18000000000000ull, + 19000000000000ull, + 90000000000000ull, + 91000000000000ull, + 810000000000000ull, + 811000000000000ull, + 890000000000000ull, + 891000000000000ull, + + 20000000000000ull, + 21000000000000ull, + 22000000000000ull, + 23000000000000ull, + 24000000000000ull, + 25000000000000ull, + 26000000000000ull, + 27000000000000ull, + 28000000000000ull, + 29000000000000ull, + 82000000000000ull, + 83000000000000ull, + 820000000000000ull, + 821000000000000ull, + 808000000000000ull, + 809000000000000ull, + + 30000000000000ull, + 31000000000000ull, + 32000000000000ull, + 33000000000000ull, + 34000000000000ull, + 35000000000000ull, + 36000000000000ull, + 37000000000000ull, + 38000000000000ull, + 39000000000000ull, + 92000000000000ull, + 93000000000000ull, + 830000000000000ull, + 831000000000000ull, + 818000000000000ull, + 819000000000000ull, + + 40000000000000ull, + 41000000000000ull, + 42000000000000ull, + 43000000000000ull, + 44000000000000ull, + 45000000000000ull, + 46000000000000ull, + 47000000000000ull, + 48000000000000ull, + 49000000000000ull, + 84000000000000ull, + 85000000000000ull, + 840000000000000ull, + 841000000000000ull, + 88000000000000ull, + 89000000000000ull, + + 50000000000000ull, + 51000000000000ull, + 52000000000000ull, + 53000000000000ull, + 54000000000000ull, + 55000000000000ull, + 56000000000000ull, + 57000000000000ull, + 58000000000000ull, + 59000000000000ull, + 94000000000000ull, + 95000000000000ull, + 850000000000000ull, + 851000000000000ull, + 98000000000000ull, + 99000000000000ull, + + 60000000000000ull, + 61000000000000ull, + 62000000000000ull, + 63000000000000ull, + 64000000000000ull, + 65000000000000ull, + 66000000000000ull, + 67000000000000ull, + 68000000000000ull, + 69000000000000ull, + 86000000000000ull, + 87000000000000ull, + 860000000000000ull, + 861000000000000ull, + 888000000000000ull, + 889000000000000ull, + + 70000000000000ull, + 71000000000000ull, + 72000000000000ull, + 73000000000000ull, + 74000000000000ull, + 75000000000000ull, + 76000000000000ull, + 77000000000000ull, + 78000000000000ull, + 79000000000000ull, + 96000000000000ull, + 97000000000000ull, + 870000000000000ull, + 871000000000000ull, + 898000000000000ull, + 899000000000000ull, + + 100000000000000ull, + 101000000000000ull, + 102000000000000ull, + 103000000000000ull, + 104000000000000ull, + 105000000000000ull, + 106000000000000ull, + 107000000000000ull, + 108000000000000ull, + 109000000000000ull, + 180000000000000ull, + 181000000000000ull, + 900000000000000ull, + 901000000000000ull, + 980000000000000ull, + 981000000000000ull, + + 110000000000000ull, + 111000000000000ull, + 112000000000000ull, + 113000000000000ull, + 114000000000000ull, + 115000000000000ull, + 116000000000000ull, + 117000000000000ull, + 118000000000000ull, + 119000000000000ull, + 190000000000000ull, + 191000000000000ull, + 910000000000000ull, + 911000000000000ull, + 990000000000000ull, + 991000000000000ull, + + 120000000000000ull, + 121000000000000ull, + 122000000000000ull, + 123000000000000ull, + 124000000000000ull, + 125000000000000ull, + 126000000000000ull, + 127000000000000ull, + 128000000000000ull, + 129000000000000ull, + 182000000000000ull, + 183000000000000ull, + 920000000000000ull, + 921000000000000ull, + 908000000000000ull, + 909000000000000ull, + + 130000000000000ull, + 131000000000000ull, + 132000000000000ull, + 133000000000000ull, + 134000000000000ull, + 135000000000000ull, + 136000000000000ull, + 137000000000000ull, + 138000000000000ull, + 139000000000000ull, + 192000000000000ull, + 193000000000000ull, + 930000000000000ull, + 931000000000000ull, + 918000000000000ull, + 919000000000000ull, + + 140000000000000ull, + 141000000000000ull, + 142000000000000ull, + 143000000000000ull, + 144000000000000ull, + 145000000000000ull, + 146000000000000ull, + 147000000000000ull, + 148000000000000ull, + 149000000000000ull, + 184000000000000ull, + 185000000000000ull, + 940000000000000ull, + 941000000000000ull, + 188000000000000ull, + 189000000000000ull, + + 150000000000000ull, + 151000000000000ull, + 152000000000000ull, + 153000000000000ull, + 154000000000000ull, + 155000000000000ull, + 156000000000000ull, + 157000000000000ull, + 158000000000000ull, + 159000000000000ull, + 194000000000000ull, + 195000000000000ull, + 950000000000000ull, + 951000000000000ull, + 198000000000000ull, + 199000000000000ull, + + 160000000000000ull, + 161000000000000ull, + 162000000000000ull, + 163000000000000ull, + 164000000000000ull, + 165000000000000ull, + 166000000000000ull, + 167000000000000ull, + 168000000000000ull, + 169000000000000ull, + 186000000000000ull, + 187000000000000ull, + 960000000000000ull, + 961000000000000ull, + 988000000000000ull, + 989000000000000ull, + + 170000000000000ull, + 171000000000000ull, + 172000000000000ull, + 173000000000000ull, + 174000000000000ull, + 175000000000000ull, + 176000000000000ull, + 177000000000000ull, + 178000000000000ull, + 179000000000000ull, + 196000000000000ull, + 197000000000000ull, + 970000000000000ull, + 971000000000000ull, + 998000000000000ull, + 999000000000000ull, + + 200000000000000ull, + 201000000000000ull, + 202000000000000ull, + 203000000000000ull, + 204000000000000ull, + 205000000000000ull, + 206000000000000ull, + 207000000000000ull, + 208000000000000ull, + 209000000000000ull, + 280000000000000ull, + 281000000000000ull, + 802000000000000ull, + 803000000000000ull, + 882000000000000ull, + 883000000000000ull, + + 210000000000000ull, + 211000000000000ull, + 212000000000000ull, + 213000000000000ull, + 214000000000000ull, + 215000000000000ull, + 216000000000000ull, + 217000000000000ull, + 218000000000000ull, + 219000000000000ull, + 290000000000000ull, + 291000000000000ull, + 812000000000000ull, + 813000000000000ull, + 892000000000000ull, + 893000000000000ull, + + 220000000000000ull, + 221000000000000ull, + 222000000000000ull, + 223000000000000ull, + 224000000000000ull, + 225000000000000ull, + 226000000000000ull, + 227000000000000ull, + 228000000000000ull, + 229000000000000ull, + 282000000000000ull, + 283000000000000ull, + 822000000000000ull, + 823000000000000ull, + 828000000000000ull, + 829000000000000ull, + + 230000000000000ull, + 231000000000000ull, + 232000000000000ull, + 233000000000000ull, + 234000000000000ull, + 235000000000000ull, + 236000000000000ull, + 237000000000000ull, + 238000000000000ull, + 239000000000000ull, + 292000000000000ull, + 293000000000000ull, + 832000000000000ull, + 833000000000000ull, + 838000000000000ull, + 839000000000000ull, + + 240000000000000ull, + 241000000000000ull, + 242000000000000ull, + 243000000000000ull, + 244000000000000ull, + 245000000000000ull, + 246000000000000ull, + 247000000000000ull, + 248000000000000ull, + 249000000000000ull, + 284000000000000ull, + 285000000000000ull, + 842000000000000ull, + 843000000000000ull, + 288000000000000ull, + 289000000000000ull, + + 250000000000000ull, + 251000000000000ull, + 252000000000000ull, + 253000000000000ull, + 254000000000000ull, + 255000000000000ull, + 256000000000000ull, + 257000000000000ull, + 258000000000000ull, + 259000000000000ull, + 294000000000000ull, + 295000000000000ull, + 852000000000000ull, + 853000000000000ull, + 298000000000000ull, + 299000000000000ull, + + 260000000000000ull, + 261000000000000ull, + 262000000000000ull, + 263000000000000ull, + 264000000000000ull, + 265000000000000ull, + 266000000000000ull, + 267000000000000ull, + 268000000000000ull, + 269000000000000ull, + 286000000000000ull, + 287000000000000ull, + 862000000000000ull, + 863000000000000ull, + 888000000000000ull, + 889000000000000ull, + + 270000000000000ull, + 271000000000000ull, + 272000000000000ull, + 273000000000000ull, + 274000000000000ull, + 275000000000000ull, + 276000000000000ull, + 277000000000000ull, + 278000000000000ull, + 279000000000000ull, + 296000000000000ull, + 297000000000000ull, + 872000000000000ull, + 873000000000000ull, + 898000000000000ull, + 899000000000000ull, + + 300000000000000ull, + 301000000000000ull, + 302000000000000ull, + 303000000000000ull, + 304000000000000ull, + 305000000000000ull, + 306000000000000ull, + 307000000000000ull, + 308000000000000ull, + 309000000000000ull, + 380000000000000ull, + 381000000000000ull, + 902000000000000ull, + 903000000000000ull, + 982000000000000ull, + 983000000000000ull, + + 310000000000000ull, + 311000000000000ull, + 312000000000000ull, + 313000000000000ull, + 314000000000000ull, + 315000000000000ull, + 316000000000000ull, + 317000000000000ull, + 318000000000000ull, + 319000000000000ull, + 390000000000000ull, + 391000000000000ull, + 912000000000000ull, + 913000000000000ull, + 992000000000000ull, + 993000000000000ull, + + 320000000000000ull, + 321000000000000ull, + 322000000000000ull, + 323000000000000ull, + 324000000000000ull, + 325000000000000ull, + 326000000000000ull, + 327000000000000ull, + 328000000000000ull, + 329000000000000ull, + 382000000000000ull, + 383000000000000ull, + 922000000000000ull, + 923000000000000ull, + 928000000000000ull, + 929000000000000ull, + + 330000000000000ull, + 331000000000000ull, + 332000000000000ull, + 333000000000000ull, + 334000000000000ull, + 335000000000000ull, + 336000000000000ull, + 337000000000000ull, + 338000000000000ull, + 339000000000000ull, + 392000000000000ull, + 393000000000000ull, + 932000000000000ull, + 933000000000000ull, + 938000000000000ull, + 939000000000000ull, + + 340000000000000ull, + 341000000000000ull, + 342000000000000ull, + 343000000000000ull, + 344000000000000ull, + 345000000000000ull, + 346000000000000ull, + 347000000000000ull, + 348000000000000ull, + 349000000000000ull, + 384000000000000ull, + 385000000000000ull, + 942000000000000ull, + 943000000000000ull, + 388000000000000ull, + 389000000000000ull, + + 350000000000000ull, + 351000000000000ull, + 352000000000000ull, + 353000000000000ull, + 354000000000000ull, + 355000000000000ull, + 356000000000000ull, + 357000000000000ull, + 358000000000000ull, + 359000000000000ull, + 394000000000000ull, + 395000000000000ull, + 952000000000000ull, + 953000000000000ull, + 398000000000000ull, + 399000000000000ull, + + 360000000000000ull, + 361000000000000ull, + 362000000000000ull, + 363000000000000ull, + 364000000000000ull, + 365000000000000ull, + 366000000000000ull, + 367000000000000ull, + 368000000000000ull, + 369000000000000ull, + 386000000000000ull, + 387000000000000ull, + 962000000000000ull, + 963000000000000ull, + 988000000000000ull, + 989000000000000ull, + + 370000000000000ull, + 371000000000000ull, + 372000000000000ull, + 373000000000000ull, + 374000000000000ull, + 375000000000000ull, + 376000000000000ull, + 377000000000000ull, + 378000000000000ull, + 379000000000000ull, + 396000000000000ull, + 397000000000000ull, + 972000000000000ull, + 973000000000000ull, + 998000000000000ull, + 999000000000000ull, + + 400000000000000ull, + 401000000000000ull, + 402000000000000ull, + 403000000000000ull, + 404000000000000ull, + 405000000000000ull, + 406000000000000ull, + 407000000000000ull, + 408000000000000ull, + 409000000000000ull, + 480000000000000ull, + 481000000000000ull, + 804000000000000ull, + 805000000000000ull, + 884000000000000ull, + 885000000000000ull, + + 410000000000000ull, + 411000000000000ull, + 412000000000000ull, + 413000000000000ull, + 414000000000000ull, + 415000000000000ull, + 416000000000000ull, + 417000000000000ull, + 418000000000000ull, + 419000000000000ull, + 490000000000000ull, + 491000000000000ull, + 814000000000000ull, + 815000000000000ull, + 894000000000000ull, + 895000000000000ull, + + 420000000000000ull, + 421000000000000ull, + 422000000000000ull, + 423000000000000ull, + 424000000000000ull, + 425000000000000ull, + 426000000000000ull, + 427000000000000ull, + 428000000000000ull, + 429000000000000ull, + 482000000000000ull, + 483000000000000ull, + 824000000000000ull, + 825000000000000ull, + 848000000000000ull, + 849000000000000ull, + + 430000000000000ull, + 431000000000000ull, + 432000000000000ull, + 433000000000000ull, + 434000000000000ull, + 435000000000000ull, + 436000000000000ull, + 437000000000000ull, + 438000000000000ull, + 439000000000000ull, + 492000000000000ull, + 493000000000000ull, + 834000000000000ull, + 835000000000000ull, + 858000000000000ull, + 859000000000000ull, + + 440000000000000ull, + 441000000000000ull, + 442000000000000ull, + 443000000000000ull, + 444000000000000ull, + 445000000000000ull, + 446000000000000ull, + 447000000000000ull, + 448000000000000ull, + 449000000000000ull, + 484000000000000ull, + 485000000000000ull, + 844000000000000ull, + 845000000000000ull, + 488000000000000ull, + 489000000000000ull, + + 450000000000000ull, + 451000000000000ull, + 452000000000000ull, + 453000000000000ull, + 454000000000000ull, + 455000000000000ull, + 456000000000000ull, + 457000000000000ull, + 458000000000000ull, + 459000000000000ull, + 494000000000000ull, + 495000000000000ull, + 854000000000000ull, + 855000000000000ull, + 498000000000000ull, + 499000000000000ull, + + 460000000000000ull, + 461000000000000ull, + 462000000000000ull, + 463000000000000ull, + 464000000000000ull, + 465000000000000ull, + 466000000000000ull, + 467000000000000ull, + 468000000000000ull, + 469000000000000ull, + 486000000000000ull, + 487000000000000ull, + 864000000000000ull, + 865000000000000ull, + 888000000000000ull, + 889000000000000ull, + + 470000000000000ull, + 471000000000000ull, + 472000000000000ull, + 473000000000000ull, + 474000000000000ull, + 475000000000000ull, + 476000000000000ull, + 477000000000000ull, + 478000000000000ull, + 479000000000000ull, + 496000000000000ull, + 497000000000000ull, + 874000000000000ull, + 875000000000000ull, + 898000000000000ull, + 899000000000000ull, + + 500000000000000ull, + 501000000000000ull, + 502000000000000ull, + 503000000000000ull, + 504000000000000ull, + 505000000000000ull, + 506000000000000ull, + 507000000000000ull, + 508000000000000ull, + 509000000000000ull, + 580000000000000ull, + 581000000000000ull, + 904000000000000ull, + 905000000000000ull, + 984000000000000ull, + 985000000000000ull, + + 510000000000000ull, + 511000000000000ull, + 512000000000000ull, + 513000000000000ull, + 514000000000000ull, + 515000000000000ull, + 516000000000000ull, + 517000000000000ull, + 518000000000000ull, + 519000000000000ull, + 590000000000000ull, + 591000000000000ull, + 914000000000000ull, + 915000000000000ull, + 994000000000000ull, + 995000000000000ull, + + 520000000000000ull, + 521000000000000ull, + 522000000000000ull, + 523000000000000ull, + 524000000000000ull, + 525000000000000ull, + 526000000000000ull, + 527000000000000ull, + 528000000000000ull, + 529000000000000ull, + 582000000000000ull, + 583000000000000ull, + 924000000000000ull, + 925000000000000ull, + 948000000000000ull, + 949000000000000ull, + + 530000000000000ull, + 531000000000000ull, + 532000000000000ull, + 533000000000000ull, + 534000000000000ull, + 535000000000000ull, + 536000000000000ull, + 537000000000000ull, + 538000000000000ull, + 539000000000000ull, + 592000000000000ull, + 593000000000000ull, + 934000000000000ull, + 935000000000000ull, + 958000000000000ull, + 959000000000000ull, + + 540000000000000ull, + 541000000000000ull, + 542000000000000ull, + 543000000000000ull, + 544000000000000ull, + 545000000000000ull, + 546000000000000ull, + 547000000000000ull, + 548000000000000ull, + 549000000000000ull, + 584000000000000ull, + 585000000000000ull, + 944000000000000ull, + 945000000000000ull, + 588000000000000ull, + 589000000000000ull, + + 550000000000000ull, + 551000000000000ull, + 552000000000000ull, + 553000000000000ull, + 554000000000000ull, + 555000000000000ull, + 556000000000000ull, + 557000000000000ull, + 558000000000000ull, + 559000000000000ull, + 594000000000000ull, + 595000000000000ull, + 954000000000000ull, + 955000000000000ull, + 598000000000000ull, + 599000000000000ull, + + 560000000000000ull, + 561000000000000ull, + 562000000000000ull, + 563000000000000ull, + 564000000000000ull, + 565000000000000ull, + 566000000000000ull, + 567000000000000ull, + 568000000000000ull, + 569000000000000ull, + 586000000000000ull, + 587000000000000ull, + 964000000000000ull, + 965000000000000ull, + 988000000000000ull, + 989000000000000ull, + + 570000000000000ull, + 571000000000000ull, + 572000000000000ull, + 573000000000000ull, + 574000000000000ull, + 575000000000000ull, + 576000000000000ull, + 577000000000000ull, + 578000000000000ull, + 579000000000000ull, + 596000000000000ull, + 597000000000000ull, + 974000000000000ull, + 975000000000000ull, + 998000000000000ull, + 999000000000000ull, + + 600000000000000ull, + 601000000000000ull, + 602000000000000ull, + 603000000000000ull, + 604000000000000ull, + 605000000000000ull, + 606000000000000ull, + 607000000000000ull, + 608000000000000ull, + 609000000000000ull, + 680000000000000ull, + 681000000000000ull, + 806000000000000ull, + 807000000000000ull, + 886000000000000ull, + 887000000000000ull, + + 610000000000000ull, + 611000000000000ull, + 612000000000000ull, + 613000000000000ull, + 614000000000000ull, + 615000000000000ull, + 616000000000000ull, + 617000000000000ull, + 618000000000000ull, + 619000000000000ull, + 690000000000000ull, + 691000000000000ull, + 816000000000000ull, + 817000000000000ull, + 896000000000000ull, + 897000000000000ull, + + 620000000000000ull, + 621000000000000ull, + 622000000000000ull, + 623000000000000ull, + 624000000000000ull, + 625000000000000ull, + 626000000000000ull, + 627000000000000ull, + 628000000000000ull, + 629000000000000ull, + 682000000000000ull, + 683000000000000ull, + 826000000000000ull, + 827000000000000ull, + 868000000000000ull, + 869000000000000ull, + + 630000000000000ull, + 631000000000000ull, + 632000000000000ull, + 633000000000000ull, + 634000000000000ull, + 635000000000000ull, + 636000000000000ull, + 637000000000000ull, + 638000000000000ull, + 639000000000000ull, + 692000000000000ull, + 693000000000000ull, + 836000000000000ull, + 837000000000000ull, + 878000000000000ull, + 879000000000000ull, + + 640000000000000ull, + 641000000000000ull, + 642000000000000ull, + 643000000000000ull, + 644000000000000ull, + 645000000000000ull, + 646000000000000ull, + 647000000000000ull, + 648000000000000ull, + 649000000000000ull, + 684000000000000ull, + 685000000000000ull, + 846000000000000ull, + 847000000000000ull, + 688000000000000ull, + 689000000000000ull, + + 650000000000000ull, + 651000000000000ull, + 652000000000000ull, + 653000000000000ull, + 654000000000000ull, + 655000000000000ull, + 656000000000000ull, + 657000000000000ull, + 658000000000000ull, + 659000000000000ull, + 694000000000000ull, + 695000000000000ull, + 856000000000000ull, + 857000000000000ull, + 698000000000000ull, + 699000000000000ull, + + 660000000000000ull, + 661000000000000ull, + 662000000000000ull, + 663000000000000ull, + 664000000000000ull, + 665000000000000ull, + 666000000000000ull, + 667000000000000ull, + 668000000000000ull, + 669000000000000ull, + 686000000000000ull, + 687000000000000ull, + 866000000000000ull, + 867000000000000ull, + 888000000000000ull, + 889000000000000ull, + + 670000000000000ull, + 671000000000000ull, + 672000000000000ull, + 673000000000000ull, + 674000000000000ull, + 675000000000000ull, + 676000000000000ull, + 677000000000000ull, + 678000000000000ull, + 679000000000000ull, + 696000000000000ull, + 697000000000000ull, + 876000000000000ull, + 877000000000000ull, + 898000000000000ull, + 899000000000000ull, + + 700000000000000ull, + 701000000000000ull, + 702000000000000ull, + 703000000000000ull, + 704000000000000ull, + 705000000000000ull, + 706000000000000ull, + 707000000000000ull, + 708000000000000ull, + 709000000000000ull, + 780000000000000ull, + 781000000000000ull, + 906000000000000ull, + 907000000000000ull, + 986000000000000ull, + 987000000000000ull, + + 710000000000000ull, + 711000000000000ull, + 712000000000000ull, + 713000000000000ull, + 714000000000000ull, + 715000000000000ull, + 716000000000000ull, + 717000000000000ull, + 718000000000000ull, + 719000000000000ull, + 790000000000000ull, + 791000000000000ull, + 916000000000000ull, + 917000000000000ull, + 996000000000000ull, + 997000000000000ull, + + 720000000000000ull, + 721000000000000ull, + 722000000000000ull, + 723000000000000ull, + 724000000000000ull, + 725000000000000ull, + 726000000000000ull, + 727000000000000ull, + 728000000000000ull, + 729000000000000ull, + 782000000000000ull, + 783000000000000ull, + 926000000000000ull, + 927000000000000ull, + 968000000000000ull, + 969000000000000ull, + + 730000000000000ull, + 731000000000000ull, + 732000000000000ull, + 733000000000000ull, + 734000000000000ull, + 735000000000000ull, + 736000000000000ull, + 737000000000000ull, + 738000000000000ull, + 739000000000000ull, + 792000000000000ull, + 793000000000000ull, + 936000000000000ull, + 937000000000000ull, + 978000000000000ull, + 979000000000000ull, + + 740000000000000ull, + 741000000000000ull, + 742000000000000ull, + 743000000000000ull, + 744000000000000ull, + 745000000000000ull, + 746000000000000ull, + 747000000000000ull, + 748000000000000ull, + 749000000000000ull, + 784000000000000ull, + 785000000000000ull, + 946000000000000ull, + 947000000000000ull, + 788000000000000ull, + 789000000000000ull, + + 750000000000000ull, + 751000000000000ull, + 752000000000000ull, + 753000000000000ull, + 754000000000000ull, + 755000000000000ull, + 756000000000000ull, + 757000000000000ull, + 758000000000000ull, + 759000000000000ull, + 794000000000000ull, + 795000000000000ull, + 956000000000000ull, + 957000000000000ull, + 798000000000000ull, + 799000000000000ull, + + 760000000000000ull, + 761000000000000ull, + 762000000000000ull, + 763000000000000ull, + 764000000000000ull, + 765000000000000ull, + 766000000000000ull, + 767000000000000ull, + 768000000000000ull, + 769000000000000ull, + 786000000000000ull, + 787000000000000ull, + 966000000000000ull, + 967000000000000ull, + 988000000000000ull, + 989000000000000ull, + + 770000000000000ull, + 771000000000000ull, + 772000000000000ull, + 773000000000000ull, + 774000000000000ull, + 775000000000000ull, + 776000000000000ull, + 777000000000000ull, + 778000000000000ull, + 779000000000000ull, + 796000000000000ull, + 797000000000000ull, + 976000000000000ull, + 977000000000000ull, + 998000000000000ull, + 999000000000000ull +}; + +static const UINT64 d2b6[] = { + 0000000000000000ull, + 1000000000000000ull, + 2000000000000000ull, + 3000000000000000ull, + 4000000000000000ull, + 5000000000000000ull, + 6000000000000000ull, + 7000000000000000ull, + 8000000000000000ull, + 9000000000000000ull, + 80000000000000000ull, + 81000000000000000ull, + 800000000000000000ull, + 801000000000000000ull, + 880000000000000000ull, + 881000000000000000ull, + + 10000000000000000ull, + 11000000000000000ull, + 12000000000000000ull, + 13000000000000000ull, + 14000000000000000ull, + 15000000000000000ull, + 16000000000000000ull, + 17000000000000000ull, + 18000000000000000ull, + 19000000000000000ull, + 90000000000000000ull, + 91000000000000000ull, + 810000000000000000ull, + 811000000000000000ull, + 890000000000000000ull, + 891000000000000000ull, + + 20000000000000000ull, + 21000000000000000ull, + 22000000000000000ull, + 23000000000000000ull, + 24000000000000000ull, + 25000000000000000ull, + 26000000000000000ull, + 27000000000000000ull, + 28000000000000000ull, + 29000000000000000ull, + 82000000000000000ull, + 83000000000000000ull, + 820000000000000000ull, + 821000000000000000ull, + 808000000000000000ull, + 809000000000000000ull, + + 30000000000000000ull, + 31000000000000000ull, + 32000000000000000ull, + 33000000000000000ull, + 34000000000000000ull, + 35000000000000000ull, + 36000000000000000ull, + 37000000000000000ull, + 38000000000000000ull, + 39000000000000000ull, + 92000000000000000ull, + 93000000000000000ull, + 830000000000000000ull, + 831000000000000000ull, + 818000000000000000ull, + 819000000000000000ull, + + 40000000000000000ull, + 41000000000000000ull, + 42000000000000000ull, + 43000000000000000ull, + 44000000000000000ull, + 45000000000000000ull, + 46000000000000000ull, + 47000000000000000ull, + 48000000000000000ull, + 49000000000000000ull, + 84000000000000000ull, + 85000000000000000ull, + 840000000000000000ull, + 841000000000000000ull, + 88000000000000000ull, + 89000000000000000ull, + + 50000000000000000ull, + 51000000000000000ull, + 52000000000000000ull, + 53000000000000000ull, + 54000000000000000ull, + 55000000000000000ull, + 56000000000000000ull, + 57000000000000000ull, + 58000000000000000ull, + 59000000000000000ull, + 94000000000000000ull, + 95000000000000000ull, + 850000000000000000ull, + 851000000000000000ull, + 98000000000000000ull, + 99000000000000000ull, + + 60000000000000000ull, + 61000000000000000ull, + 62000000000000000ull, + 63000000000000000ull, + 64000000000000000ull, + 65000000000000000ull, + 66000000000000000ull, + 67000000000000000ull, + 68000000000000000ull, + 69000000000000000ull, + 86000000000000000ull, + 87000000000000000ull, + 860000000000000000ull, + 861000000000000000ull, + 888000000000000000ull, + 889000000000000000ull, + + 70000000000000000ull, + 71000000000000000ull, + 72000000000000000ull, + 73000000000000000ull, + 74000000000000000ull, + 75000000000000000ull, + 76000000000000000ull, + 77000000000000000ull, + 78000000000000000ull, + 79000000000000000ull, + 96000000000000000ull, + 97000000000000000ull, + 870000000000000000ull, + 871000000000000000ull, + 898000000000000000ull, + 899000000000000000ull, + + 100000000000000000ull, + 101000000000000000ull, + 102000000000000000ull, + 103000000000000000ull, + 104000000000000000ull, + 105000000000000000ull, + 106000000000000000ull, + 107000000000000000ull, + 108000000000000000ull, + 109000000000000000ull, + 180000000000000000ull, + 181000000000000000ull, + 900000000000000000ull, + 901000000000000000ull, + 980000000000000000ull, + 981000000000000000ull, + + 110000000000000000ull, + 111000000000000000ull, + 112000000000000000ull, + 113000000000000000ull, + 114000000000000000ull, + 115000000000000000ull, + 116000000000000000ull, + 117000000000000000ull, + 118000000000000000ull, + 119000000000000000ull, + 190000000000000000ull, + 191000000000000000ull, + 910000000000000000ull, + 911000000000000000ull, + 990000000000000000ull, + 991000000000000000ull, + + 120000000000000000ull, + 121000000000000000ull, + 122000000000000000ull, + 123000000000000000ull, + 124000000000000000ull, + 125000000000000000ull, + 126000000000000000ull, + 127000000000000000ull, + 128000000000000000ull, + 129000000000000000ull, + 182000000000000000ull, + 183000000000000000ull, + 920000000000000000ull, + 921000000000000000ull, + 908000000000000000ull, + 909000000000000000ull, + + 130000000000000000ull, + 131000000000000000ull, + 132000000000000000ull, + 133000000000000000ull, + 134000000000000000ull, + 135000000000000000ull, + 136000000000000000ull, + 137000000000000000ull, + 138000000000000000ull, + 139000000000000000ull, + 192000000000000000ull, + 193000000000000000ull, + 930000000000000000ull, + 931000000000000000ull, + 918000000000000000ull, + 919000000000000000ull, + + 140000000000000000ull, + 141000000000000000ull, + 142000000000000000ull, + 143000000000000000ull, + 144000000000000000ull, + 145000000000000000ull, + 146000000000000000ull, + 147000000000000000ull, + 148000000000000000ull, + 149000000000000000ull, + 184000000000000000ull, + 185000000000000000ull, + 940000000000000000ull, + 941000000000000000ull, + 188000000000000000ull, + 189000000000000000ull, + + 150000000000000000ull, + 151000000000000000ull, + 152000000000000000ull, + 153000000000000000ull, + 154000000000000000ull, + 155000000000000000ull, + 156000000000000000ull, + 157000000000000000ull, + 158000000000000000ull, + 159000000000000000ull, + 194000000000000000ull, + 195000000000000000ull, + 950000000000000000ull, + 951000000000000000ull, + 198000000000000000ull, + 199000000000000000ull, + + 160000000000000000ull, + 161000000000000000ull, + 162000000000000000ull, + 163000000000000000ull, + 164000000000000000ull, + 165000000000000000ull, + 166000000000000000ull, + 167000000000000000ull, + 168000000000000000ull, + 169000000000000000ull, + 186000000000000000ull, + 187000000000000000ull, + 960000000000000000ull, + 961000000000000000ull, + 988000000000000000ull, + 989000000000000000ull, + + 170000000000000000ull, + 171000000000000000ull, + 172000000000000000ull, + 173000000000000000ull, + 174000000000000000ull, + 175000000000000000ull, + 176000000000000000ull, + 177000000000000000ull, + 178000000000000000ull, + 179000000000000000ull, + 196000000000000000ull, + 197000000000000000ull, + 970000000000000000ull, + 971000000000000000ull, + 998000000000000000ull, + 999000000000000000ull, + + 200000000000000000ull, + 201000000000000000ull, + 202000000000000000ull, + 203000000000000000ull, + 204000000000000000ull, + 205000000000000000ull, + 206000000000000000ull, + 207000000000000000ull, + 208000000000000000ull, + 209000000000000000ull, + 280000000000000000ull, + 281000000000000000ull, + 802000000000000000ull, + 803000000000000000ull, + 882000000000000000ull, + 883000000000000000ull, + + 210000000000000000ull, + 211000000000000000ull, + 212000000000000000ull, + 213000000000000000ull, + 214000000000000000ull, + 215000000000000000ull, + 216000000000000000ull, + 217000000000000000ull, + 218000000000000000ull, + 219000000000000000ull, + 290000000000000000ull, + 291000000000000000ull, + 812000000000000000ull, + 813000000000000000ull, + 892000000000000000ull, + 893000000000000000ull, + + 220000000000000000ull, + 221000000000000000ull, + 222000000000000000ull, + 223000000000000000ull, + 224000000000000000ull, + 225000000000000000ull, + 226000000000000000ull, + 227000000000000000ull, + 228000000000000000ull, + 229000000000000000ull, + 282000000000000000ull, + 283000000000000000ull, + 822000000000000000ull, + 823000000000000000ull, + 828000000000000000ull, + 829000000000000000ull, + + 230000000000000000ull, + 231000000000000000ull, + 232000000000000000ull, + 233000000000000000ull, + 234000000000000000ull, + 235000000000000000ull, + 236000000000000000ull, + 237000000000000000ull, + 238000000000000000ull, + 239000000000000000ull, + 292000000000000000ull, + 293000000000000000ull, + 832000000000000000ull, + 833000000000000000ull, + 838000000000000000ull, + 839000000000000000ull, + + 240000000000000000ull, + 241000000000000000ull, + 242000000000000000ull, + 243000000000000000ull, + 244000000000000000ull, + 245000000000000000ull, + 246000000000000000ull, + 247000000000000000ull, + 248000000000000000ull, + 249000000000000000ull, + 284000000000000000ull, + 285000000000000000ull, + 842000000000000000ull, + 843000000000000000ull, + 288000000000000000ull, + 289000000000000000ull, + + 250000000000000000ull, + 251000000000000000ull, + 252000000000000000ull, + 253000000000000000ull, + 254000000000000000ull, + 255000000000000000ull, + 256000000000000000ull, + 257000000000000000ull, + 258000000000000000ull, + 259000000000000000ull, + 294000000000000000ull, + 295000000000000000ull, + 852000000000000000ull, + 853000000000000000ull, + 298000000000000000ull, + 299000000000000000ull, + + 260000000000000000ull, + 261000000000000000ull, + 262000000000000000ull, + 263000000000000000ull, + 264000000000000000ull, + 265000000000000000ull, + 266000000000000000ull, + 267000000000000000ull, + 268000000000000000ull, + 269000000000000000ull, + 286000000000000000ull, + 287000000000000000ull, + 862000000000000000ull, + 863000000000000000ull, + 888000000000000000ull, + 889000000000000000ull, + + 270000000000000000ull, + 271000000000000000ull, + 272000000000000000ull, + 273000000000000000ull, + 274000000000000000ull, + 275000000000000000ull, + 276000000000000000ull, + 277000000000000000ull, + 278000000000000000ull, + 279000000000000000ull, + 296000000000000000ull, + 297000000000000000ull, + 872000000000000000ull, + 873000000000000000ull, + 898000000000000000ull, + 899000000000000000ull, + + 300000000000000000ull, + 301000000000000000ull, + 302000000000000000ull, + 303000000000000000ull, + 304000000000000000ull, + 305000000000000000ull, + 306000000000000000ull, + 307000000000000000ull, + 308000000000000000ull, + 309000000000000000ull, + 380000000000000000ull, + 381000000000000000ull, + 902000000000000000ull, + 903000000000000000ull, + 982000000000000000ull, + 983000000000000000ull, + + 310000000000000000ull, + 311000000000000000ull, + 312000000000000000ull, + 313000000000000000ull, + 314000000000000000ull, + 315000000000000000ull, + 316000000000000000ull, + 317000000000000000ull, + 318000000000000000ull, + 319000000000000000ull, + 390000000000000000ull, + 391000000000000000ull, + 912000000000000000ull, + 913000000000000000ull, + 992000000000000000ull, + 993000000000000000ull, + + 320000000000000000ull, + 321000000000000000ull, + 322000000000000000ull, + 323000000000000000ull, + 324000000000000000ull, + 325000000000000000ull, + 326000000000000000ull, + 327000000000000000ull, + 328000000000000000ull, + 329000000000000000ull, + 382000000000000000ull, + 383000000000000000ull, + 922000000000000000ull, + 923000000000000000ull, + 928000000000000000ull, + 929000000000000000ull, + + 330000000000000000ull, + 331000000000000000ull, + 332000000000000000ull, + 333000000000000000ull, + 334000000000000000ull, + 335000000000000000ull, + 336000000000000000ull, + 337000000000000000ull, + 338000000000000000ull, + 339000000000000000ull, + 392000000000000000ull, + 393000000000000000ull, + 932000000000000000ull, + 933000000000000000ull, + 938000000000000000ull, + 939000000000000000ull, + + 340000000000000000ull, + 341000000000000000ull, + 342000000000000000ull, + 343000000000000000ull, + 344000000000000000ull, + 345000000000000000ull, + 346000000000000000ull, + 347000000000000000ull, + 348000000000000000ull, + 349000000000000000ull, + 384000000000000000ull, + 385000000000000000ull, + 942000000000000000ull, + 943000000000000000ull, + 388000000000000000ull, + 389000000000000000ull, + + 350000000000000000ull, + 351000000000000000ull, + 352000000000000000ull, + 353000000000000000ull, + 354000000000000000ull, + 355000000000000000ull, + 356000000000000000ull, + 357000000000000000ull, + 358000000000000000ull, + 359000000000000000ull, + 394000000000000000ull, + 395000000000000000ull, + 952000000000000000ull, + 953000000000000000ull, + 398000000000000000ull, + 399000000000000000ull, + + 360000000000000000ull, + 361000000000000000ull, + 362000000000000000ull, + 363000000000000000ull, + 364000000000000000ull, + 365000000000000000ull, + 366000000000000000ull, + 367000000000000000ull, + 368000000000000000ull, + 369000000000000000ull, + 386000000000000000ull, + 387000000000000000ull, + 962000000000000000ull, + 963000000000000000ull, + 988000000000000000ull, + 989000000000000000ull, + + 370000000000000000ull, + 371000000000000000ull, + 372000000000000000ull, + 373000000000000000ull, + 374000000000000000ull, + 375000000000000000ull, + 376000000000000000ull, + 377000000000000000ull, + 378000000000000000ull, + 379000000000000000ull, + 396000000000000000ull, + 397000000000000000ull, + 972000000000000000ull, + 973000000000000000ull, + 998000000000000000ull, + 999000000000000000ull, + + 400000000000000000ull, + 401000000000000000ull, + 402000000000000000ull, + 403000000000000000ull, + 404000000000000000ull, + 405000000000000000ull, + 406000000000000000ull, + 407000000000000000ull, + 408000000000000000ull, + 409000000000000000ull, + 480000000000000000ull, + 481000000000000000ull, + 804000000000000000ull, + 805000000000000000ull, + 884000000000000000ull, + 885000000000000000ull, + + 410000000000000000ull, + 411000000000000000ull, + 412000000000000000ull, + 413000000000000000ull, + 414000000000000000ull, + 415000000000000000ull, + 416000000000000000ull, + 417000000000000000ull, + 418000000000000000ull, + 419000000000000000ull, + 490000000000000000ull, + 491000000000000000ull, + 814000000000000000ull, + 815000000000000000ull, + 894000000000000000ull, + 895000000000000000ull, + + 420000000000000000ull, + 421000000000000000ull, + 422000000000000000ull, + 423000000000000000ull, + 424000000000000000ull, + 425000000000000000ull, + 426000000000000000ull, + 427000000000000000ull, + 428000000000000000ull, + 429000000000000000ull, + 482000000000000000ull, + 483000000000000000ull, + 824000000000000000ull, + 825000000000000000ull, + 848000000000000000ull, + 849000000000000000ull, + + 430000000000000000ull, + 431000000000000000ull, + 432000000000000000ull, + 433000000000000000ull, + 434000000000000000ull, + 435000000000000000ull, + 436000000000000000ull, + 437000000000000000ull, + 438000000000000000ull, + 439000000000000000ull, + 492000000000000000ull, + 493000000000000000ull, + 834000000000000000ull, + 835000000000000000ull, + 858000000000000000ull, + 859000000000000000ull, + + 440000000000000000ull, + 441000000000000000ull, + 442000000000000000ull, + 443000000000000000ull, + 444000000000000000ull, + 445000000000000000ull, + 446000000000000000ull, + 447000000000000000ull, + 448000000000000000ull, + 449000000000000000ull, + 484000000000000000ull, + 485000000000000000ull, + 844000000000000000ull, + 845000000000000000ull, + 488000000000000000ull, + 489000000000000000ull, + + 450000000000000000ull, + 451000000000000000ull, + 452000000000000000ull, + 453000000000000000ull, + 454000000000000000ull, + 455000000000000000ull, + 456000000000000000ull, + 457000000000000000ull, + 458000000000000000ull, + 459000000000000000ull, + 494000000000000000ull, + 495000000000000000ull, + 854000000000000000ull, + 855000000000000000ull, + 498000000000000000ull, + 499000000000000000ull, + + 460000000000000000ull, + 461000000000000000ull, + 462000000000000000ull, + 463000000000000000ull, + 464000000000000000ull, + 465000000000000000ull, + 466000000000000000ull, + 467000000000000000ull, + 468000000000000000ull, + 469000000000000000ull, + 486000000000000000ull, + 487000000000000000ull, + 864000000000000000ull, + 865000000000000000ull, + 888000000000000000ull, + 889000000000000000ull, + + 470000000000000000ull, + 471000000000000000ull, + 472000000000000000ull, + 473000000000000000ull, + 474000000000000000ull, + 475000000000000000ull, + 476000000000000000ull, + 477000000000000000ull, + 478000000000000000ull, + 479000000000000000ull, + 496000000000000000ull, + 497000000000000000ull, + 874000000000000000ull, + 875000000000000000ull, + 898000000000000000ull, + 899000000000000000ull, + + 500000000000000000ull, + 501000000000000000ull, + 502000000000000000ull, + 503000000000000000ull, + 504000000000000000ull, + 505000000000000000ull, + 506000000000000000ull, + 507000000000000000ull, + 508000000000000000ull, + 509000000000000000ull, + 580000000000000000ull, + 581000000000000000ull, + 904000000000000000ull, + 905000000000000000ull, + 984000000000000000ull, + 985000000000000000ull, + + 510000000000000000ull, + 511000000000000000ull, + 512000000000000000ull, + 513000000000000000ull, + 514000000000000000ull, + 515000000000000000ull, + 516000000000000000ull, + 517000000000000000ull, + 518000000000000000ull, + 519000000000000000ull, + 590000000000000000ull, + 591000000000000000ull, + 914000000000000000ull, + 915000000000000000ull, + 994000000000000000ull, + 995000000000000000ull, + + 520000000000000000ull, + 521000000000000000ull, + 522000000000000000ull, + 523000000000000000ull, + 524000000000000000ull, + 525000000000000000ull, + 526000000000000000ull, + 527000000000000000ull, + 528000000000000000ull, + 529000000000000000ull, + 582000000000000000ull, + 583000000000000000ull, + 924000000000000000ull, + 925000000000000000ull, + 948000000000000000ull, + 949000000000000000ull, + + 530000000000000000ull, + 531000000000000000ull, + 532000000000000000ull, + 533000000000000000ull, + 534000000000000000ull, + 535000000000000000ull, + 536000000000000000ull, + 537000000000000000ull, + 538000000000000000ull, + 539000000000000000ull, + 592000000000000000ull, + 593000000000000000ull, + 934000000000000000ull, + 935000000000000000ull, + 958000000000000000ull, + 959000000000000000ull, + + 540000000000000000ull, + 541000000000000000ull, + 542000000000000000ull, + 543000000000000000ull, + 544000000000000000ull, + 545000000000000000ull, + 546000000000000000ull, + 547000000000000000ull, + 548000000000000000ull, + 549000000000000000ull, + 584000000000000000ull, + 585000000000000000ull, + 944000000000000000ull, + 945000000000000000ull, + 588000000000000000ull, + 589000000000000000ull, + + 550000000000000000ull, + 551000000000000000ull, + 552000000000000000ull, + 553000000000000000ull, + 554000000000000000ull, + 555000000000000000ull, + 556000000000000000ull, + 557000000000000000ull, + 558000000000000000ull, + 559000000000000000ull, + 594000000000000000ull, + 595000000000000000ull, + 954000000000000000ull, + 955000000000000000ull, + 598000000000000000ull, + 599000000000000000ull, + + 560000000000000000ull, + 561000000000000000ull, + 562000000000000000ull, + 563000000000000000ull, + 564000000000000000ull, + 565000000000000000ull, + 566000000000000000ull, + 567000000000000000ull, + 568000000000000000ull, + 569000000000000000ull, + 586000000000000000ull, + 587000000000000000ull, + 964000000000000000ull, + 965000000000000000ull, + 988000000000000000ull, + 989000000000000000ull, + + 570000000000000000ull, + 571000000000000000ull, + 572000000000000000ull, + 573000000000000000ull, + 574000000000000000ull, + 575000000000000000ull, + 576000000000000000ull, + 577000000000000000ull, + 578000000000000000ull, + 579000000000000000ull, + 596000000000000000ull, + 597000000000000000ull, + 974000000000000000ull, + 975000000000000000ull, + 998000000000000000ull, + 999000000000000000ull, + + 600000000000000000ull, + 601000000000000000ull, + 602000000000000000ull, + 603000000000000000ull, + 604000000000000000ull, + 605000000000000000ull, + 606000000000000000ull, + 607000000000000000ull, + 608000000000000000ull, + 609000000000000000ull, + 680000000000000000ull, + 681000000000000000ull, + 806000000000000000ull, + 807000000000000000ull, + 886000000000000000ull, + 887000000000000000ull, + + 610000000000000000ull, + 611000000000000000ull, + 612000000000000000ull, + 613000000000000000ull, + 614000000000000000ull, + 615000000000000000ull, + 616000000000000000ull, + 617000000000000000ull, + 618000000000000000ull, + 619000000000000000ull, + 690000000000000000ull, + 691000000000000000ull, + 816000000000000000ull, + 817000000000000000ull, + 896000000000000000ull, + 897000000000000000ull, + + 620000000000000000ull, + 621000000000000000ull, + 622000000000000000ull, + 623000000000000000ull, + 624000000000000000ull, + 625000000000000000ull, + 626000000000000000ull, + 627000000000000000ull, + 628000000000000000ull, + 629000000000000000ull, + 682000000000000000ull, + 683000000000000000ull, + 826000000000000000ull, + 827000000000000000ull, + 868000000000000000ull, + 869000000000000000ull, + + 630000000000000000ull, + 631000000000000000ull, + 632000000000000000ull, + 633000000000000000ull, + 634000000000000000ull, + 635000000000000000ull, + 636000000000000000ull, + 637000000000000000ull, + 638000000000000000ull, + 639000000000000000ull, + 692000000000000000ull, + 693000000000000000ull, + 836000000000000000ull, + 837000000000000000ull, + 878000000000000000ull, + 879000000000000000ull, + + 640000000000000000ull, + 641000000000000000ull, + 642000000000000000ull, + 643000000000000000ull, + 644000000000000000ull, + 645000000000000000ull, + 646000000000000000ull, + 647000000000000000ull, + 648000000000000000ull, + 649000000000000000ull, + 684000000000000000ull, + 685000000000000000ull, + 846000000000000000ull, + 847000000000000000ull, + 688000000000000000ull, + 689000000000000000ull, + + 650000000000000000ull, + 651000000000000000ull, + 652000000000000000ull, + 653000000000000000ull, + 654000000000000000ull, + 655000000000000000ull, + 656000000000000000ull, + 657000000000000000ull, + 658000000000000000ull, + 659000000000000000ull, + 694000000000000000ull, + 695000000000000000ull, + 856000000000000000ull, + 857000000000000000ull, + 698000000000000000ull, + 699000000000000000ull, + + 660000000000000000ull, + 661000000000000000ull, + 662000000000000000ull, + 663000000000000000ull, + 664000000000000000ull, + 665000000000000000ull, + 666000000000000000ull, + 667000000000000000ull, + 668000000000000000ull, + 669000000000000000ull, + 686000000000000000ull, + 687000000000000000ull, + 866000000000000000ull, + 867000000000000000ull, + 888000000000000000ull, + 889000000000000000ull, + + 670000000000000000ull, + 671000000000000000ull, + 672000000000000000ull, + 673000000000000000ull, + 674000000000000000ull, + 675000000000000000ull, + 676000000000000000ull, + 677000000000000000ull, + 678000000000000000ull, + 679000000000000000ull, + 696000000000000000ull, + 697000000000000000ull, + 876000000000000000ull, + 877000000000000000ull, + 898000000000000000ull, + 899000000000000000ull, + + 700000000000000000ull, + 701000000000000000ull, + 702000000000000000ull, + 703000000000000000ull, + 704000000000000000ull, + 705000000000000000ull, + 706000000000000000ull, + 707000000000000000ull, + 708000000000000000ull, + 709000000000000000ull, + 780000000000000000ull, + 781000000000000000ull, + 906000000000000000ull, + 907000000000000000ull, + 986000000000000000ull, + 987000000000000000ull, + + 710000000000000000ull, + 711000000000000000ull, + 712000000000000000ull, + 713000000000000000ull, + 714000000000000000ull, + 715000000000000000ull, + 716000000000000000ull, + 717000000000000000ull, + 718000000000000000ull, + 719000000000000000ull, + 790000000000000000ull, + 791000000000000000ull, + 916000000000000000ull, + 917000000000000000ull, + 996000000000000000ull, + 997000000000000000ull, + + 720000000000000000ull, + 721000000000000000ull, + 722000000000000000ull, + 723000000000000000ull, + 724000000000000000ull, + 725000000000000000ull, + 726000000000000000ull, + 727000000000000000ull, + 728000000000000000ull, + 729000000000000000ull, + 782000000000000000ull, + 783000000000000000ull, + 926000000000000000ull, + 927000000000000000ull, + 968000000000000000ull, + 969000000000000000ull, + + 730000000000000000ull, + 731000000000000000ull, + 732000000000000000ull, + 733000000000000000ull, + 734000000000000000ull, + 735000000000000000ull, + 736000000000000000ull, + 737000000000000000ull, + 738000000000000000ull, + 739000000000000000ull, + 792000000000000000ull, + 793000000000000000ull, + 936000000000000000ull, + 937000000000000000ull, + 978000000000000000ull, + 979000000000000000ull, + + 740000000000000000ull, + 741000000000000000ull, + 742000000000000000ull, + 743000000000000000ull, + 744000000000000000ull, + 745000000000000000ull, + 746000000000000000ull, + 747000000000000000ull, + 748000000000000000ull, + 749000000000000000ull, + 784000000000000000ull, + 785000000000000000ull, + 946000000000000000ull, + 947000000000000000ull, + 788000000000000000ull, + 789000000000000000ull, + + 750000000000000000ull, + 751000000000000000ull, + 752000000000000000ull, + 753000000000000000ull, + 754000000000000000ull, + 755000000000000000ull, + 756000000000000000ull, + 757000000000000000ull, + 758000000000000000ull, + 759000000000000000ull, + 794000000000000000ull, + 795000000000000000ull, + 956000000000000000ull, + 957000000000000000ull, + 798000000000000000ull, + 799000000000000000ull, + + 760000000000000000ull, + 761000000000000000ull, + 762000000000000000ull, + 763000000000000000ull, + 764000000000000000ull, + 765000000000000000ull, + 766000000000000000ull, + 767000000000000000ull, + 768000000000000000ull, + 769000000000000000ull, + 786000000000000000ull, + 787000000000000000ull, + 966000000000000000ull, + 967000000000000000ull, + 988000000000000000ull, + 989000000000000000ull, + + 770000000000000000ull, + 771000000000000000ull, + 772000000000000000ull, + 773000000000000000ull, + 774000000000000000ull, + 775000000000000000ull, + 776000000000000000ull, + 777000000000000000ull, + 778000000000000000ull, + 779000000000000000ull, + 796000000000000000ull, + 797000000000000000ull, + 976000000000000000ull, + 977000000000000000ull, + 998000000000000000ull, + 999000000000000000ull +}; + +static const UINT64 b2d[] = { + 0x000ull, + 0x001ull, + 0x002ull, + 0x003ull, + 0x004ull, + 0x005ull, + 0x006ull, + 0x007ull, + 0x008ull, + 0x009ull, + + 0x010ull, + 0x011ull, + 0x012ull, + 0x013ull, + 0x014ull, + 0x015ull, + 0x016ull, + 0x017ull, + 0x018ull, + 0x019ull, + + 0x020ull, + 0x021ull, + 0x022ull, + 0x023ull, + 0x024ull, + 0x025ull, + 0x026ull, + 0x027ull, + 0x028ull, + 0x029ull, + + 0x030ull, + 0x031ull, + 0x032ull, + 0x033ull, + 0x034ull, + 0x035ull, + 0x036ull, + 0x037ull, + 0x038ull, + 0x039ull, + + 0x040ull, + 0x041ull, + 0x042ull, + 0x043ull, + 0x044ull, + 0x045ull, + 0x046ull, + 0x047ull, + 0x048ull, + 0x049ull, + + 0x050ull, + 0x051ull, + 0x052ull, + 0x053ull, + 0x054ull, + 0x055ull, + 0x056ull, + 0x057ull, + 0x058ull, + 0x059ull, + + 0x060ull, + 0x061ull, + 0x062ull, + 0x063ull, + 0x064ull, + 0x065ull, + 0x066ull, + 0x067ull, + 0x068ull, + 0x069ull, + + 0x070ull, + 0x071ull, + 0x072ull, + 0x073ull, + 0x074ull, + 0x075ull, + 0x076ull, + 0x077ull, + 0x078ull, + 0x079ull, + + 0x00aull, + 0x00bull, + 0x02aull, + 0x02bull, + 0x04aull, + 0x04bull, + 0x06aull, + 0x06bull, + 0x04eull, + 0x04full, + + 0x01aull, + 0x01bull, + 0x03aull, + 0x03bull, + 0x05aull, + 0x05bull, + 0x07aull, + 0x07bull, + 0x05eull, + 0x05full, + + 0x080ull, + 0x081ull, + 0x082ull, + 0x083ull, + 0x084ull, + 0x085ull, + 0x086ull, + 0x087ull, + 0x088ull, + 0x089ull, + + 0x090ull, + 0x091ull, + 0x092ull, + 0x093ull, + 0x094ull, + 0x095ull, + 0x096ull, + 0x097ull, + 0x098ull, + 0x099ull, + + 0x0a0ull, + 0x0a1ull, + 0x0a2ull, + 0x0a3ull, + 0x0a4ull, + 0x0a5ull, + 0x0a6ull, + 0x0a7ull, + 0x0a8ull, + 0x0a9ull, + + 0x0b0ull, + 0x0b1ull, + 0x0b2ull, + 0x0b3ull, + 0x0b4ull, + 0x0b5ull, + 0x0b6ull, + 0x0b7ull, + 0x0b8ull, + 0x0b9ull, + + 0x0c0ull, + 0x0c1ull, + 0x0c2ull, + 0x0c3ull, + 0x0c4ull, + 0x0c5ull, + 0x0c6ull, + 0x0c7ull, + 0x0c8ull, + 0x0c9ull, + + 0x0d0ull, + 0x0d1ull, + 0x0d2ull, + 0x0d3ull, + 0x0d4ull, + 0x0d5ull, + 0x0d6ull, + 0x0d7ull, + 0x0d8ull, + 0x0d9ull, + + 0x0e0ull, + 0x0e1ull, + 0x0e2ull, + 0x0e3ull, + 0x0e4ull, + 0x0e5ull, + 0x0e6ull, + 0x0e7ull, + 0x0e8ull, + 0x0e9ull, + + 0x0f0ull, + 0x0f1ull, + 0x0f2ull, + 0x0f3ull, + 0x0f4ull, + 0x0f5ull, + 0x0f6ull, + 0x0f7ull, + 0x0f8ull, + 0x0f9ull, + + 0x08aull, + 0x08bull, + 0x0aaull, + 0x0abull, + 0x0caull, + 0x0cbull, + 0x0eaull, + 0x0ebull, + 0x0ceull, + 0x0cfull, + + 0x09aull, + 0x09bull, + 0x0baull, + 0x0bbull, + 0x0daull, + 0x0dbull, + 0x0faull, + 0x0fbull, + 0x0deull, + 0x0dfull, + + 0x100ull, + 0x101ull, + 0x102ull, + 0x103ull, + 0x104ull, + 0x105ull, + 0x106ull, + 0x107ull, + 0x108ull, + 0x109ull, + + 0x110ull, + 0x111ull, + 0x112ull, + 0x113ull, + 0x114ull, + 0x115ull, + 0x116ull, + 0x117ull, + 0x118ull, + 0x119ull, + + 0x120ull, + 0x121ull, + 0x122ull, + 0x123ull, + 0x124ull, + 0x125ull, + 0x126ull, + 0x127ull, + 0x128ull, + 0x129ull, + + 0x130ull, + 0x131ull, + 0x132ull, + 0x133ull, + 0x134ull, + 0x135ull, + 0x136ull, + 0x137ull, + 0x138ull, + 0x139ull, + + 0x140ull, + 0x141ull, + 0x142ull, + 0x143ull, + 0x144ull, + 0x145ull, + 0x146ull, + 0x147ull, + 0x148ull, + 0x149ull, + + 0x150ull, + 0x151ull, + 0x152ull, + 0x153ull, + 0x154ull, + 0x155ull, + 0x156ull, + 0x157ull, + 0x158ull, + 0x159ull, + + 0x160ull, + 0x161ull, + 0x162ull, + 0x163ull, + 0x164ull, + 0x165ull, + 0x166ull, + 0x167ull, + 0x168ull, + 0x169ull, + + 0x170ull, + 0x171ull, + 0x172ull, + 0x173ull, + 0x174ull, + 0x175ull, + 0x176ull, + 0x177ull, + 0x178ull, + 0x179ull, + + 0x10aull, + 0x10bull, + 0x12aull, + 0x12bull, + 0x14aull, + 0x14bull, + 0x16aull, + 0x16bull, + 0x14eull, + 0x14full, + + 0x11aull, + 0x11bull, + 0x13aull, + 0x13bull, + 0x15aull, + 0x15bull, + 0x17aull, + 0x17bull, + 0x15eull, + 0x15full, + + 0x180ull, + 0x181ull, + 0x182ull, + 0x183ull, + 0x184ull, + 0x185ull, + 0x186ull, + 0x187ull, + 0x188ull, + 0x189ull, + + 0x190ull, + 0x191ull, + 0x192ull, + 0x193ull, + 0x194ull, + 0x195ull, + 0x196ull, + 0x197ull, + 0x198ull, + 0x199ull, + + 0x1a0ull, + 0x1a1ull, + 0x1a2ull, + 0x1a3ull, + 0x1a4ull, + 0x1a5ull, + 0x1a6ull, + 0x1a7ull, + 0x1a8ull, + 0x1a9ull, + + 0x1b0ull, + 0x1b1ull, + 0x1b2ull, + 0x1b3ull, + 0x1b4ull, + 0x1b5ull, + 0x1b6ull, + 0x1b7ull, + 0x1b8ull, + 0x1b9ull, + + 0x1c0ull, + 0x1c1ull, + 0x1c2ull, + 0x1c3ull, + 0x1c4ull, + 0x1c5ull, + 0x1c6ull, + 0x1c7ull, + 0x1c8ull, + 0x1c9ull, + + 0x1d0ull, + 0x1d1ull, + 0x1d2ull, + 0x1d3ull, + 0x1d4ull, + 0x1d5ull, + 0x1d6ull, + 0x1d7ull, + 0x1d8ull, + 0x1d9ull, + + 0x1e0ull, + 0x1e1ull, + 0x1e2ull, + 0x1e3ull, + 0x1e4ull, + 0x1e5ull, + 0x1e6ull, + 0x1e7ull, + 0x1e8ull, + 0x1e9ull, + + 0x1f0ull, + 0x1f1ull, + 0x1f2ull, + 0x1f3ull, + 0x1f4ull, + 0x1f5ull, + 0x1f6ull, + 0x1f7ull, + 0x1f8ull, + 0x1f9ull, + + 0x18aull, + 0x18bull, + 0x1aaull, + 0x1abull, + 0x1caull, + 0x1cbull, + 0x1eaull, + 0x1ebull, + 0x1ceull, + 0x1cfull, + + 0x19aull, + 0x19bull, + 0x1baull, + 0x1bbull, + 0x1daull, + 0x1dbull, + 0x1faull, + 0x1fbull, + 0x1deull, + 0x1dfull, + + 0x200ull, + 0x201ull, + 0x202ull, + 0x203ull, + 0x204ull, + 0x205ull, + 0x206ull, + 0x207ull, + 0x208ull, + 0x209ull, + + 0x210ull, + 0x211ull, + 0x212ull, + 0x213ull, + 0x214ull, + 0x215ull, + 0x216ull, + 0x217ull, + 0x218ull, + 0x219ull, + + 0x220ull, + 0x221ull, + 0x222ull, + 0x223ull, + 0x224ull, + 0x225ull, + 0x226ull, + 0x227ull, + 0x228ull, + 0x229ull, + + 0x230ull, + 0x231ull, + 0x232ull, + 0x233ull, + 0x234ull, + 0x235ull, + 0x236ull, + 0x237ull, + 0x238ull, + 0x239ull, + + 0x240ull, + 0x241ull, + 0x242ull, + 0x243ull, + 0x244ull, + 0x245ull, + 0x246ull, + 0x247ull, + 0x248ull, + 0x249ull, + + 0x250ull, + 0x251ull, + 0x252ull, + 0x253ull, + 0x254ull, + 0x255ull, + 0x256ull, + 0x257ull, + 0x258ull, + 0x259ull, + + 0x260ull, + 0x261ull, + 0x262ull, + 0x263ull, + 0x264ull, + 0x265ull, + 0x266ull, + 0x267ull, + 0x268ull, + 0x269ull, + + 0x270ull, + 0x271ull, + 0x272ull, + 0x273ull, + 0x274ull, + 0x275ull, + 0x276ull, + 0x277ull, + 0x278ull, + 0x279ull, + + 0x20aull, + 0x20bull, + 0x22aull, + 0x22bull, + 0x24aull, + 0x24bull, + 0x26aull, + 0x26bull, + 0x24eull, + 0x24full, + + 0x21aull, + 0x21bull, + 0x23aull, + 0x23bull, + 0x25aull, + 0x25bull, + 0x27aull, + 0x27bull, + 0x25eull, + 0x25full, + + 0x280ull, + 0x281ull, + 0x282ull, + 0x283ull, + 0x284ull, + 0x285ull, + 0x286ull, + 0x287ull, + 0x288ull, + 0x289ull, + + 0x290ull, + 0x291ull, + 0x292ull, + 0x293ull, + 0x294ull, + 0x295ull, + 0x296ull, + 0x297ull, + 0x298ull, + 0x299ull, + + 0x2a0ull, + 0x2a1ull, + 0x2a2ull, + 0x2a3ull, + 0x2a4ull, + 0x2a5ull, + 0x2a6ull, + 0x2a7ull, + 0x2a8ull, + 0x2a9ull, + + 0x2b0ull, + 0x2b1ull, + 0x2b2ull, + 0x2b3ull, + 0x2b4ull, + 0x2b5ull, + 0x2b6ull, + 0x2b7ull, + 0x2b8ull, + 0x2b9ull, + + 0x2c0ull, + 0x2c1ull, + 0x2c2ull, + 0x2c3ull, + 0x2c4ull, + 0x2c5ull, + 0x2c6ull, + 0x2c7ull, + 0x2c8ull, + 0x2c9ull, + + 0x2d0ull, + 0x2d1ull, + 0x2d2ull, + 0x2d3ull, + 0x2d4ull, + 0x2d5ull, + 0x2d6ull, + 0x2d7ull, + 0x2d8ull, + 0x2d9ull, + + 0x2e0ull, + 0x2e1ull, + 0x2e2ull, + 0x2e3ull, + 0x2e4ull, + 0x2e5ull, + 0x2e6ull, + 0x2e7ull, + 0x2e8ull, + 0x2e9ull, + + 0x2f0ull, + 0x2f1ull, + 0x2f2ull, + 0x2f3ull, + 0x2f4ull, + 0x2f5ull, + 0x2f6ull, + 0x2f7ull, + 0x2f8ull, + 0x2f9ull, + + 0x28aull, + 0x28bull, + 0x2aaull, + 0x2abull, + 0x2caull, + 0x2cbull, + 0x2eaull, + 0x2ebull, + 0x2ceull, + 0x2cfull, + + 0x29aull, + 0x29bull, + 0x2baull, + 0x2bbull, + 0x2daull, + 0x2dbull, + 0x2faull, + 0x2fbull, + 0x2deull, + 0x2dfull, + + 0x300ull, + 0x301ull, + 0x302ull, + 0x303ull, + 0x304ull, + 0x305ull, + 0x306ull, + 0x307ull, + 0x308ull, + 0x309ull, + + 0x310ull, + 0x311ull, + 0x312ull, + 0x313ull, + 0x314ull, + 0x315ull, + 0x316ull, + 0x317ull, + 0x318ull, + 0x319ull, + + 0x320ull, + 0x321ull, + 0x322ull, + 0x323ull, + 0x324ull, + 0x325ull, + 0x326ull, + 0x327ull, + 0x328ull, + 0x329ull, + + 0x330ull, + 0x331ull, + 0x332ull, + 0x333ull, + 0x334ull, + 0x335ull, + 0x336ull, + 0x337ull, + 0x338ull, + 0x339ull, + + 0x340ull, + 0x341ull, + 0x342ull, + 0x343ull, + 0x344ull, + 0x345ull, + 0x346ull, + 0x347ull, + 0x348ull, + 0x349ull, + + 0x350ull, + 0x351ull, + 0x352ull, + 0x353ull, + 0x354ull, + 0x355ull, + 0x356ull, + 0x357ull, + 0x358ull, + 0x359ull, + + 0x360ull, + 0x361ull, + 0x362ull, + 0x363ull, + 0x364ull, + 0x365ull, + 0x366ull, + 0x367ull, + 0x368ull, + 0x369ull, + + 0x370ull, + 0x371ull, + 0x372ull, + 0x373ull, + 0x374ull, + 0x375ull, + 0x376ull, + 0x377ull, + 0x378ull, + 0x379ull, + + 0x30aull, + 0x30bull, + 0x32aull, + 0x32bull, + 0x34aull, + 0x34bull, + 0x36aull, + 0x36bull, + 0x34eull, + 0x34full, + + 0x31aull, + 0x31bull, + 0x33aull, + 0x33bull, + 0x35aull, + 0x35bull, + 0x37aull, + 0x37bull, + 0x35eull, + 0x35full, + + 0x380ull, + 0x381ull, + 0x382ull, + 0x383ull, + 0x384ull, + 0x385ull, + 0x386ull, + 0x387ull, + 0x388ull, + 0x389ull, + + 0x390ull, + 0x391ull, + 0x392ull, + 0x393ull, + 0x394ull, + 0x395ull, + 0x396ull, + 0x397ull, + 0x398ull, + 0x399ull, + + 0x3a0ull, + 0x3a1ull, + 0x3a2ull, + 0x3a3ull, + 0x3a4ull, + 0x3a5ull, + 0x3a6ull, + 0x3a7ull, + 0x3a8ull, + 0x3a9ull, + + 0x3b0ull, + 0x3b1ull, + 0x3b2ull, + 0x3b3ull, + 0x3b4ull, + 0x3b5ull, + 0x3b6ull, + 0x3b7ull, + 0x3b8ull, + 0x3b9ull, + + 0x3c0ull, + 0x3c1ull, + 0x3c2ull, + 0x3c3ull, + 0x3c4ull, + 0x3c5ull, + 0x3c6ull, + 0x3c7ull, + 0x3c8ull, + 0x3c9ull, + + 0x3d0ull, + 0x3d1ull, + 0x3d2ull, + 0x3d3ull, + 0x3d4ull, + 0x3d5ull, + 0x3d6ull, + 0x3d7ull, + 0x3d8ull, + 0x3d9ull, + + 0x3e0ull, + 0x3e1ull, + 0x3e2ull, + 0x3e3ull, + 0x3e4ull, + 0x3e5ull, + 0x3e6ull, + 0x3e7ull, + 0x3e8ull, + 0x3e9ull, + + 0x3f0ull, + 0x3f1ull, + 0x3f2ull, + 0x3f3ull, + 0x3f4ull, + 0x3f5ull, + 0x3f6ull, + 0x3f7ull, + 0x3f8ull, + 0x3f9ull, + + 0x38aull, + 0x38bull, + 0x3aaull, + 0x3abull, + 0x3caull, + 0x3cbull, + 0x3eaull, + 0x3ebull, + 0x3ceull, + 0x3cfull, + + 0x39aull, + 0x39bull, + 0x3baull, + 0x3bbull, + 0x3daull, + 0x3dbull, + 0x3faull, + 0x3fbull, + 0x3deull, + 0x3dfull, + + 0x00cull, + 0x00dull, + 0x10cull, + 0x10dull, + 0x20cull, + 0x20dull, + 0x30cull, + 0x30dull, + 0x02eull, + 0x02full, + + 0x01cull, + 0x01dull, + 0x11cull, + 0x11dull, + 0x21cull, + 0x21dull, + 0x31cull, + 0x31dull, + 0x03eull, + 0x03full, + + 0x02cull, + 0x02dull, + 0x12cull, + 0x12dull, + 0x22cull, + 0x22dull, + 0x32cull, + 0x32dull, + 0x12eull, + 0x12full, + + 0x03cull, + 0x03dull, + 0x13cull, + 0x13dull, + 0x23cull, + 0x23dull, + 0x33cull, + 0x33dull, + 0x13eull, + 0x13full, + + 0x04cull, + 0x04dull, + 0x14cull, + 0x14dull, + 0x24cull, + 0x24dull, + 0x34cull, + 0x34dull, + 0x22eull, + 0x22full, + + 0x05cull, + 0x05dull, + 0x15cull, + 0x15dull, + 0x25cull, + 0x25dull, + 0x35cull, + 0x35dull, + 0x23eull, + 0x23full, + + 0x06cull, + 0x06dull, + 0x16cull, + 0x16dull, + 0x26cull, + 0x26dull, + 0x36cull, + 0x36dull, + 0x32eull, + 0x32full, + + 0x07cull, + 0x07dull, + 0x17cull, + 0x17dull, + 0x27cull, + 0x27dull, + 0x37cull, + 0x37dull, + 0x33eull, + 0x33full, + + 0x00eull, + 0x00full, + 0x10eull, + 0x10full, + 0x20eull, + 0x20full, + 0x30eull, + 0x30full, + 0x06eull, + 0x06full, + + 0x01eull, + 0x01full, + 0x11eull, + 0x11full, + 0x21eull, + 0x21full, + 0x31eull, + 0x31full, + 0x07eull, + 0x07full, + + 0x08cull, + 0x08dull, + 0x18cull, + 0x18dull, + 0x28cull, + 0x28dull, + 0x38cull, + 0x38dull, + 0x0aeull, + 0x0afull, + + 0x09cull, + 0x09dull, + 0x19cull, + 0x19dull, + 0x29cull, + 0x29dull, + 0x39cull, + 0x39dull, + 0x0beull, + 0x0bfull, + + 0x0acull, + 0x0adull, + 0x1acull, + 0x1adull, + 0x2acull, + 0x2adull, + 0x3acull, + 0x3adull, + 0x1aeull, + 0x1afull, + + 0x0bcull, + 0x0bdull, + 0x1bcull, + 0x1bdull, + 0x2bcull, + 0x2bdull, + 0x3bcull, + 0x3bdull, + 0x1beull, + 0x1bfull, + + 0x0ccull, + 0x0cdull, + 0x1ccull, + 0x1cdull, + 0x2ccull, + 0x2cdull, + 0x3ccull, + 0x3cdull, + 0x2aeull, + 0x2afull, + + 0x0dcull, + 0x0ddull, + 0x1dcull, + 0x1ddull, + 0x2dcull, + 0x2ddull, + 0x3dcull, + 0x3ddull, + 0x2beull, + 0x2bfull, + + 0x0ecull, + 0x0edull, + 0x1ecull, + 0x1edull, + 0x2ecull, + 0x2edull, + 0x3ecull, + 0x3edull, + 0x3aeull, + 0x3afull, + + 0x0fcull, + 0x0fdull, + 0x1fcull, + 0x1fdull, + 0x2fcull, + 0x2fdull, + 0x3fcull, + 0x3fdull, + 0x3beull, + 0x3bfull, + + 0x08eull, + 0x08full, + 0x18eull, + 0x18full, + 0x28eull, + 0x28full, + 0x38eull, + 0x38full, + 0x0eeull, + 0x0efull, + + 0x09eull, + 0x09full, + 0x19eull, + 0x19full, + 0x29eull, + 0x29full, + 0x39eull, + 0x39full, + 0x0feull, + 0x0ffull +}; + +static const UINT64 b2d2[] = { + 0x000ull << 10, + 0x001ull << 10, + 0x002ull << 10, + 0x003ull << 10, + 0x004ull << 10, + 0x005ull << 10, + 0x006ull << 10, + 0x007ull << 10, + 0x008ull << 10, + 0x009ull << 10, + + 0x010ull << 10, + 0x011ull << 10, + 0x012ull << 10, + 0x013ull << 10, + 0x014ull << 10, + 0x015ull << 10, + 0x016ull << 10, + 0x017ull << 10, + 0x018ull << 10, + 0x019ull << 10, + + 0x020ull << 10, + 0x021ull << 10, + 0x022ull << 10, + 0x023ull << 10, + 0x024ull << 10, + 0x025ull << 10, + 0x026ull << 10, + 0x027ull << 10, + 0x028ull << 10, + 0x029ull << 10, + + 0x030ull << 10, + 0x031ull << 10, + 0x032ull << 10, + 0x033ull << 10, + 0x034ull << 10, + 0x035ull << 10, + 0x036ull << 10, + 0x037ull << 10, + 0x038ull << 10, + 0x039ull << 10, + + 0x040ull << 10, + 0x041ull << 10, + 0x042ull << 10, + 0x043ull << 10, + 0x044ull << 10, + 0x045ull << 10, + 0x046ull << 10, + 0x047ull << 10, + 0x048ull << 10, + 0x049ull << 10, + + 0x050ull << 10, + 0x051ull << 10, + 0x052ull << 10, + 0x053ull << 10, + 0x054ull << 10, + 0x055ull << 10, + 0x056ull << 10, + 0x057ull << 10, + 0x058ull << 10, + 0x059ull << 10, + + 0x060ull << 10, + 0x061ull << 10, + 0x062ull << 10, + 0x063ull << 10, + 0x064ull << 10, + 0x065ull << 10, + 0x066ull << 10, + 0x067ull << 10, + 0x068ull << 10, + 0x069ull << 10, + + 0x070ull << 10, + 0x071ull << 10, + 0x072ull << 10, + 0x073ull << 10, + 0x074ull << 10, + 0x075ull << 10, + 0x076ull << 10, + 0x077ull << 10, + 0x078ull << 10, + 0x079ull << 10, + + 0x00aull << 10, + 0x00bull << 10, + 0x02aull << 10, + 0x02bull << 10, + 0x04aull << 10, + 0x04bull << 10, + 0x06aull << 10, + 0x06bull << 10, + 0x04eull << 10, + 0x04full << 10, + + 0x01aull << 10, + 0x01bull << 10, + 0x03aull << 10, + 0x03bull << 10, + 0x05aull << 10, + 0x05bull << 10, + 0x07aull << 10, + 0x07bull << 10, + 0x05eull << 10, + 0x05full << 10, + + 0x080ull << 10, + 0x081ull << 10, + 0x082ull << 10, + 0x083ull << 10, + 0x084ull << 10, + 0x085ull << 10, + 0x086ull << 10, + 0x087ull << 10, + 0x088ull << 10, + 0x089ull << 10, + + 0x090ull << 10, + 0x091ull << 10, + 0x092ull << 10, + 0x093ull << 10, + 0x094ull << 10, + 0x095ull << 10, + 0x096ull << 10, + 0x097ull << 10, + 0x098ull << 10, + 0x099ull << 10, + + 0x0a0ull << 10, + 0x0a1ull << 10, + 0x0a2ull << 10, + 0x0a3ull << 10, + 0x0a4ull << 10, + 0x0a5ull << 10, + 0x0a6ull << 10, + 0x0a7ull << 10, + 0x0a8ull << 10, + 0x0a9ull << 10, + + 0x0b0ull << 10, + 0x0b1ull << 10, + 0x0b2ull << 10, + 0x0b3ull << 10, + 0x0b4ull << 10, + 0x0b5ull << 10, + 0x0b6ull << 10, + 0x0b7ull << 10, + 0x0b8ull << 10, + 0x0b9ull << 10, + + 0x0c0ull << 10, + 0x0c1ull << 10, + 0x0c2ull << 10, + 0x0c3ull << 10, + 0x0c4ull << 10, + 0x0c5ull << 10, + 0x0c6ull << 10, + 0x0c7ull << 10, + 0x0c8ull << 10, + 0x0c9ull << 10, + + 0x0d0ull << 10, + 0x0d1ull << 10, + 0x0d2ull << 10, + 0x0d3ull << 10, + 0x0d4ull << 10, + 0x0d5ull << 10, + 0x0d6ull << 10, + 0x0d7ull << 10, + 0x0d8ull << 10, + 0x0d9ull << 10, + + 0x0e0ull << 10, + 0x0e1ull << 10, + 0x0e2ull << 10, + 0x0e3ull << 10, + 0x0e4ull << 10, + 0x0e5ull << 10, + 0x0e6ull << 10, + 0x0e7ull << 10, + 0x0e8ull << 10, + 0x0e9ull << 10, + + 0x0f0ull << 10, + 0x0f1ull << 10, + 0x0f2ull << 10, + 0x0f3ull << 10, + 0x0f4ull << 10, + 0x0f5ull << 10, + 0x0f6ull << 10, + 0x0f7ull << 10, + 0x0f8ull << 10, + 0x0f9ull << 10, + + 0x08aull << 10, + 0x08bull << 10, + 0x0aaull << 10, + 0x0abull << 10, + 0x0caull << 10, + 0x0cbull << 10, + 0x0eaull << 10, + 0x0ebull << 10, + 0x0ceull << 10, + 0x0cfull << 10, + + 0x09aull << 10, + 0x09bull << 10, + 0x0baull << 10, + 0x0bbull << 10, + 0x0daull << 10, + 0x0dbull << 10, + 0x0faull << 10, + 0x0fbull << 10, + 0x0deull << 10, + 0x0dfull << 10, + + 0x100ull << 10, + 0x101ull << 10, + 0x102ull << 10, + 0x103ull << 10, + 0x104ull << 10, + 0x105ull << 10, + 0x106ull << 10, + 0x107ull << 10, + 0x108ull << 10, + 0x109ull << 10, + + 0x110ull << 10, + 0x111ull << 10, + 0x112ull << 10, + 0x113ull << 10, + 0x114ull << 10, + 0x115ull << 10, + 0x116ull << 10, + 0x117ull << 10, + 0x118ull << 10, + 0x119ull << 10, + + 0x120ull << 10, + 0x121ull << 10, + 0x122ull << 10, + 0x123ull << 10, + 0x124ull << 10, + 0x125ull << 10, + 0x126ull << 10, + 0x127ull << 10, + 0x128ull << 10, + 0x129ull << 10, + + 0x130ull << 10, + 0x131ull << 10, + 0x132ull << 10, + 0x133ull << 10, + 0x134ull << 10, + 0x135ull << 10, + 0x136ull << 10, + 0x137ull << 10, + 0x138ull << 10, + 0x139ull << 10, + + 0x140ull << 10, + 0x141ull << 10, + 0x142ull << 10, + 0x143ull << 10, + 0x144ull << 10, + 0x145ull << 10, + 0x146ull << 10, + 0x147ull << 10, + 0x148ull << 10, + 0x149ull << 10, + + 0x150ull << 10, + 0x151ull << 10, + 0x152ull << 10, + 0x153ull << 10, + 0x154ull << 10, + 0x155ull << 10, + 0x156ull << 10, + 0x157ull << 10, + 0x158ull << 10, + 0x159ull << 10, + + 0x160ull << 10, + 0x161ull << 10, + 0x162ull << 10, + 0x163ull << 10, + 0x164ull << 10, + 0x165ull << 10, + 0x166ull << 10, + 0x167ull << 10, + 0x168ull << 10, + 0x169ull << 10, + + 0x170ull << 10, + 0x171ull << 10, + 0x172ull << 10, + 0x173ull << 10, + 0x174ull << 10, + 0x175ull << 10, + 0x176ull << 10, + 0x177ull << 10, + 0x178ull << 10, + 0x179ull << 10, + + 0x10aull << 10, + 0x10bull << 10, + 0x12aull << 10, + 0x12bull << 10, + 0x14aull << 10, + 0x14bull << 10, + 0x16aull << 10, + 0x16bull << 10, + 0x14eull << 10, + 0x14full << 10, + + 0x11aull << 10, + 0x11bull << 10, + 0x13aull << 10, + 0x13bull << 10, + 0x15aull << 10, + 0x15bull << 10, + 0x17aull << 10, + 0x17bull << 10, + 0x15eull << 10, + 0x15full << 10, + + 0x180ull << 10, + 0x181ull << 10, + 0x182ull << 10, + 0x183ull << 10, + 0x184ull << 10, + 0x185ull << 10, + 0x186ull << 10, + 0x187ull << 10, + 0x188ull << 10, + 0x189ull << 10, + + 0x190ull << 10, + 0x191ull << 10, + 0x192ull << 10, + 0x193ull << 10, + 0x194ull << 10, + 0x195ull << 10, + 0x196ull << 10, + 0x197ull << 10, + 0x198ull << 10, + 0x199ull << 10, + + 0x1a0ull << 10, + 0x1a1ull << 10, + 0x1a2ull << 10, + 0x1a3ull << 10, + 0x1a4ull << 10, + 0x1a5ull << 10, + 0x1a6ull << 10, + 0x1a7ull << 10, + 0x1a8ull << 10, + 0x1a9ull << 10, + + 0x1b0ull << 10, + 0x1b1ull << 10, + 0x1b2ull << 10, + 0x1b3ull << 10, + 0x1b4ull << 10, + 0x1b5ull << 10, + 0x1b6ull << 10, + 0x1b7ull << 10, + 0x1b8ull << 10, + 0x1b9ull << 10, + + 0x1c0ull << 10, + 0x1c1ull << 10, + 0x1c2ull << 10, + 0x1c3ull << 10, + 0x1c4ull << 10, + 0x1c5ull << 10, + 0x1c6ull << 10, + 0x1c7ull << 10, + 0x1c8ull << 10, + 0x1c9ull << 10, + + 0x1d0ull << 10, + 0x1d1ull << 10, + 0x1d2ull << 10, + 0x1d3ull << 10, + 0x1d4ull << 10, + 0x1d5ull << 10, + 0x1d6ull << 10, + 0x1d7ull << 10, + 0x1d8ull << 10, + 0x1d9ull << 10, + + 0x1e0ull << 10, + 0x1e1ull << 10, + 0x1e2ull << 10, + 0x1e3ull << 10, + 0x1e4ull << 10, + 0x1e5ull << 10, + 0x1e6ull << 10, + 0x1e7ull << 10, + 0x1e8ull << 10, + 0x1e9ull << 10, + + 0x1f0ull << 10, + 0x1f1ull << 10, + 0x1f2ull << 10, + 0x1f3ull << 10, + 0x1f4ull << 10, + 0x1f5ull << 10, + 0x1f6ull << 10, + 0x1f7ull << 10, + 0x1f8ull << 10, + 0x1f9ull << 10, + + 0x18aull << 10, + 0x18bull << 10, + 0x1aaull << 10, + 0x1abull << 10, + 0x1caull << 10, + 0x1cbull << 10, + 0x1eaull << 10, + 0x1ebull << 10, + 0x1ceull << 10, + 0x1cfull << 10, + + 0x19aull << 10, + 0x19bull << 10, + 0x1baull << 10, + 0x1bbull << 10, + 0x1daull << 10, + 0x1dbull << 10, + 0x1faull << 10, + 0x1fbull << 10, + 0x1deull << 10, + 0x1dfull << 10, + + 0x200ull << 10, + 0x201ull << 10, + 0x202ull << 10, + 0x203ull << 10, + 0x204ull << 10, + 0x205ull << 10, + 0x206ull << 10, + 0x207ull << 10, + 0x208ull << 10, + 0x209ull << 10, + + 0x210ull << 10, + 0x211ull << 10, + 0x212ull << 10, + 0x213ull << 10, + 0x214ull << 10, + 0x215ull << 10, + 0x216ull << 10, + 0x217ull << 10, + 0x218ull << 10, + 0x219ull << 10, + + 0x220ull << 10, + 0x221ull << 10, + 0x222ull << 10, + 0x223ull << 10, + 0x224ull << 10, + 0x225ull << 10, + 0x226ull << 10, + 0x227ull << 10, + 0x228ull << 10, + 0x229ull << 10, + + 0x230ull << 10, + 0x231ull << 10, + 0x232ull << 10, + 0x233ull << 10, + 0x234ull << 10, + 0x235ull << 10, + 0x236ull << 10, + 0x237ull << 10, + 0x238ull << 10, + 0x239ull << 10, + + 0x240ull << 10, + 0x241ull << 10, + 0x242ull << 10, + 0x243ull << 10, + 0x244ull << 10, + 0x245ull << 10, + 0x246ull << 10, + 0x247ull << 10, + 0x248ull << 10, + 0x249ull << 10, + + 0x250ull << 10, + 0x251ull << 10, + 0x252ull << 10, + 0x253ull << 10, + 0x254ull << 10, + 0x255ull << 10, + 0x256ull << 10, + 0x257ull << 10, + 0x258ull << 10, + 0x259ull << 10, + + 0x260ull << 10, + 0x261ull << 10, + 0x262ull << 10, + 0x263ull << 10, + 0x264ull << 10, + 0x265ull << 10, + 0x266ull << 10, + 0x267ull << 10, + 0x268ull << 10, + 0x269ull << 10, + + 0x270ull << 10, + 0x271ull << 10, + 0x272ull << 10, + 0x273ull << 10, + 0x274ull << 10, + 0x275ull << 10, + 0x276ull << 10, + 0x277ull << 10, + 0x278ull << 10, + 0x279ull << 10, + + 0x20aull << 10, + 0x20bull << 10, + 0x22aull << 10, + 0x22bull << 10, + 0x24aull << 10, + 0x24bull << 10, + 0x26aull << 10, + 0x26bull << 10, + 0x24eull << 10, + 0x24full << 10, + + 0x21aull << 10, + 0x21bull << 10, + 0x23aull << 10, + 0x23bull << 10, + 0x25aull << 10, + 0x25bull << 10, + 0x27aull << 10, + 0x27bull << 10, + 0x25eull << 10, + 0x25full << 10, + + 0x280ull << 10, + 0x281ull << 10, + 0x282ull << 10, + 0x283ull << 10, + 0x284ull << 10, + 0x285ull << 10, + 0x286ull << 10, + 0x287ull << 10, + 0x288ull << 10, + 0x289ull << 10, + + 0x290ull << 10, + 0x291ull << 10, + 0x292ull << 10, + 0x293ull << 10, + 0x294ull << 10, + 0x295ull << 10, + 0x296ull << 10, + 0x297ull << 10, + 0x298ull << 10, + 0x299ull << 10, + + 0x2a0ull << 10, + 0x2a1ull << 10, + 0x2a2ull << 10, + 0x2a3ull << 10, + 0x2a4ull << 10, + 0x2a5ull << 10, + 0x2a6ull << 10, + 0x2a7ull << 10, + 0x2a8ull << 10, + 0x2a9ull << 10, + + 0x2b0ull << 10, + 0x2b1ull << 10, + 0x2b2ull << 10, + 0x2b3ull << 10, + 0x2b4ull << 10, + 0x2b5ull << 10, + 0x2b6ull << 10, + 0x2b7ull << 10, + 0x2b8ull << 10, + 0x2b9ull << 10, + + 0x2c0ull << 10, + 0x2c1ull << 10, + 0x2c2ull << 10, + 0x2c3ull << 10, + 0x2c4ull << 10, + 0x2c5ull << 10, + 0x2c6ull << 10, + 0x2c7ull << 10, + 0x2c8ull << 10, + 0x2c9ull << 10, + + 0x2d0ull << 10, + 0x2d1ull << 10, + 0x2d2ull << 10, + 0x2d3ull << 10, + 0x2d4ull << 10, + 0x2d5ull << 10, + 0x2d6ull << 10, + 0x2d7ull << 10, + 0x2d8ull << 10, + 0x2d9ull << 10, + + 0x2e0ull << 10, + 0x2e1ull << 10, + 0x2e2ull << 10, + 0x2e3ull << 10, + 0x2e4ull << 10, + 0x2e5ull << 10, + 0x2e6ull << 10, + 0x2e7ull << 10, + 0x2e8ull << 10, + 0x2e9ull << 10, + + 0x2f0ull << 10, + 0x2f1ull << 10, + 0x2f2ull << 10, + 0x2f3ull << 10, + 0x2f4ull << 10, + 0x2f5ull << 10, + 0x2f6ull << 10, + 0x2f7ull << 10, + 0x2f8ull << 10, + 0x2f9ull << 10, + + 0x28aull << 10, + 0x28bull << 10, + 0x2aaull << 10, + 0x2abull << 10, + 0x2caull << 10, + 0x2cbull << 10, + 0x2eaull << 10, + 0x2ebull << 10, + 0x2ceull << 10, + 0x2cfull << 10, + + 0x29aull << 10, + 0x29bull << 10, + 0x2baull << 10, + 0x2bbull << 10, + 0x2daull << 10, + 0x2dbull << 10, + 0x2faull << 10, + 0x2fbull << 10, + 0x2deull << 10, + 0x2dfull << 10, + + 0x300ull << 10, + 0x301ull << 10, + 0x302ull << 10, + 0x303ull << 10, + 0x304ull << 10, + 0x305ull << 10, + 0x306ull << 10, + 0x307ull << 10, + 0x308ull << 10, + 0x309ull << 10, + + 0x310ull << 10, + 0x311ull << 10, + 0x312ull << 10, + 0x313ull << 10, + 0x314ull << 10, + 0x315ull << 10, + 0x316ull << 10, + 0x317ull << 10, + 0x318ull << 10, + 0x319ull << 10, + + 0x320ull << 10, + 0x321ull << 10, + 0x322ull << 10, + 0x323ull << 10, + 0x324ull << 10, + 0x325ull << 10, + 0x326ull << 10, + 0x327ull << 10, + 0x328ull << 10, + 0x329ull << 10, + + 0x330ull << 10, + 0x331ull << 10, + 0x332ull << 10, + 0x333ull << 10, + 0x334ull << 10, + 0x335ull << 10, + 0x336ull << 10, + 0x337ull << 10, + 0x338ull << 10, + 0x339ull << 10, + + 0x340ull << 10, + 0x341ull << 10, + 0x342ull << 10, + 0x343ull << 10, + 0x344ull << 10, + 0x345ull << 10, + 0x346ull << 10, + 0x347ull << 10, + 0x348ull << 10, + 0x349ull << 10, + + 0x350ull << 10, + 0x351ull << 10, + 0x352ull << 10, + 0x353ull << 10, + 0x354ull << 10, + 0x355ull << 10, + 0x356ull << 10, + 0x357ull << 10, + 0x358ull << 10, + 0x359ull << 10, + + 0x360ull << 10, + 0x361ull << 10, + 0x362ull << 10, + 0x363ull << 10, + 0x364ull << 10, + 0x365ull << 10, + 0x366ull << 10, + 0x367ull << 10, + 0x368ull << 10, + 0x369ull << 10, + + 0x370ull << 10, + 0x371ull << 10, + 0x372ull << 10, + 0x373ull << 10, + 0x374ull << 10, + 0x375ull << 10, + 0x376ull << 10, + 0x377ull << 10, + 0x378ull << 10, + 0x379ull << 10, + + 0x30aull << 10, + 0x30bull << 10, + 0x32aull << 10, + 0x32bull << 10, + 0x34aull << 10, + 0x34bull << 10, + 0x36aull << 10, + 0x36bull << 10, + 0x34eull << 10, + 0x34full << 10, + + 0x31aull << 10, + 0x31bull << 10, + 0x33aull << 10, + 0x33bull << 10, + 0x35aull << 10, + 0x35bull << 10, + 0x37aull << 10, + 0x37bull << 10, + 0x35eull << 10, + 0x35full << 10, + + 0x380ull << 10, + 0x381ull << 10, + 0x382ull << 10, + 0x383ull << 10, + 0x384ull << 10, + 0x385ull << 10, + 0x386ull << 10, + 0x387ull << 10, + 0x388ull << 10, + 0x389ull << 10, + + 0x390ull << 10, + 0x391ull << 10, + 0x392ull << 10, + 0x393ull << 10, + 0x394ull << 10, + 0x395ull << 10, + 0x396ull << 10, + 0x397ull << 10, + 0x398ull << 10, + 0x399ull << 10, + + 0x3a0ull << 10, + 0x3a1ull << 10, + 0x3a2ull << 10, + 0x3a3ull << 10, + 0x3a4ull << 10, + 0x3a5ull << 10, + 0x3a6ull << 10, + 0x3a7ull << 10, + 0x3a8ull << 10, + 0x3a9ull << 10, + + 0x3b0ull << 10, + 0x3b1ull << 10, + 0x3b2ull << 10, + 0x3b3ull << 10, + 0x3b4ull << 10, + 0x3b5ull << 10, + 0x3b6ull << 10, + 0x3b7ull << 10, + 0x3b8ull << 10, + 0x3b9ull << 10, + + 0x3c0ull << 10, + 0x3c1ull << 10, + 0x3c2ull << 10, + 0x3c3ull << 10, + 0x3c4ull << 10, + 0x3c5ull << 10, + 0x3c6ull << 10, + 0x3c7ull << 10, + 0x3c8ull << 10, + 0x3c9ull << 10, + + 0x3d0ull << 10, + 0x3d1ull << 10, + 0x3d2ull << 10, + 0x3d3ull << 10, + 0x3d4ull << 10, + 0x3d5ull << 10, + 0x3d6ull << 10, + 0x3d7ull << 10, + 0x3d8ull << 10, + 0x3d9ull << 10, + + 0x3e0ull << 10, + 0x3e1ull << 10, + 0x3e2ull << 10, + 0x3e3ull << 10, + 0x3e4ull << 10, + 0x3e5ull << 10, + 0x3e6ull << 10, + 0x3e7ull << 10, + 0x3e8ull << 10, + 0x3e9ull << 10, + + 0x3f0ull << 10, + 0x3f1ull << 10, + 0x3f2ull << 10, + 0x3f3ull << 10, + 0x3f4ull << 10, + 0x3f5ull << 10, + 0x3f6ull << 10, + 0x3f7ull << 10, + 0x3f8ull << 10, + 0x3f9ull << 10, + + 0x38aull << 10, + 0x38bull << 10, + 0x3aaull << 10, + 0x3abull << 10, + 0x3caull << 10, + 0x3cbull << 10, + 0x3eaull << 10, + 0x3ebull << 10, + 0x3ceull << 10, + 0x3cfull << 10, + + 0x39aull << 10, + 0x39bull << 10, + 0x3baull << 10, + 0x3bbull << 10, + 0x3daull << 10, + 0x3dbull << 10, + 0x3faull << 10, + 0x3fbull << 10, + 0x3deull << 10, + 0x3dfull << 10, + + 0x00cull << 10, + 0x00dull << 10, + 0x10cull << 10, + 0x10dull << 10, + 0x20cull << 10, + 0x20dull << 10, + 0x30cull << 10, + 0x30dull << 10, + 0x02eull << 10, + 0x02full << 10, + + 0x01cull << 10, + 0x01dull << 10, + 0x11cull << 10, + 0x11dull << 10, + 0x21cull << 10, + 0x21dull << 10, + 0x31cull << 10, + 0x31dull << 10, + 0x03eull << 10, + 0x03full << 10, + + 0x02cull << 10, + 0x02dull << 10, + 0x12cull << 10, + 0x12dull << 10, + 0x22cull << 10, + 0x22dull << 10, + 0x32cull << 10, + 0x32dull << 10, + 0x12eull << 10, + 0x12full << 10, + + 0x03cull << 10, + 0x03dull << 10, + 0x13cull << 10, + 0x13dull << 10, + 0x23cull << 10, + 0x23dull << 10, + 0x33cull << 10, + 0x33dull << 10, + 0x13eull << 10, + 0x13full << 10, + + 0x04cull << 10, + 0x04dull << 10, + 0x14cull << 10, + 0x14dull << 10, + 0x24cull << 10, + 0x24dull << 10, + 0x34cull << 10, + 0x34dull << 10, + 0x22eull << 10, + 0x22full << 10, + + 0x05cull << 10, + 0x05dull << 10, + 0x15cull << 10, + 0x15dull << 10, + 0x25cull << 10, + 0x25dull << 10, + 0x35cull << 10, + 0x35dull << 10, + 0x23eull << 10, + 0x23full << 10, + + 0x06cull << 10, + 0x06dull << 10, + 0x16cull << 10, + 0x16dull << 10, + 0x26cull << 10, + 0x26dull << 10, + 0x36cull << 10, + 0x36dull << 10, + 0x32eull << 10, + 0x32full << 10, + + 0x07cull << 10, + 0x07dull << 10, + 0x17cull << 10, + 0x17dull << 10, + 0x27cull << 10, + 0x27dull << 10, + 0x37cull << 10, + 0x37dull << 10, + 0x33eull << 10, + 0x33full << 10, + + 0x00eull << 10, + 0x00full << 10, + 0x10eull << 10, + 0x10full << 10, + 0x20eull << 10, + 0x20full << 10, + 0x30eull << 10, + 0x30full << 10, + 0x06eull << 10, + 0x06full << 10, + + 0x01eull << 10, + 0x01full << 10, + 0x11eull << 10, + 0x11full << 10, + 0x21eull << 10, + 0x21full << 10, + 0x31eull << 10, + 0x31full << 10, + 0x07eull << 10, + 0x07full << 10, + + 0x08cull << 10, + 0x08dull << 10, + 0x18cull << 10, + 0x18dull << 10, + 0x28cull << 10, + 0x28dull << 10, + 0x38cull << 10, + 0x38dull << 10, + 0x0aeull << 10, + 0x0afull << 10, + + 0x09cull << 10, + 0x09dull << 10, + 0x19cull << 10, + 0x19dull << 10, + 0x29cull << 10, + 0x29dull << 10, + 0x39cull << 10, + 0x39dull << 10, + 0x0beull << 10, + 0x0bfull << 10, + + 0x0acull << 10, + 0x0adull << 10, + 0x1acull << 10, + 0x1adull << 10, + 0x2acull << 10, + 0x2adull << 10, + 0x3acull << 10, + 0x3adull << 10, + 0x1aeull << 10, + 0x1afull << 10, + + 0x0bcull << 10, + 0x0bdull << 10, + 0x1bcull << 10, + 0x1bdull << 10, + 0x2bcull << 10, + 0x2bdull << 10, + 0x3bcull << 10, + 0x3bdull << 10, + 0x1beull << 10, + 0x1bfull << 10, + + 0x0ccull << 10, + 0x0cdull << 10, + 0x1ccull << 10, + 0x1cdull << 10, + 0x2ccull << 10, + 0x2cdull << 10, + 0x3ccull << 10, + 0x3cdull << 10, + 0x2aeull << 10, + 0x2afull << 10, + + 0x0dcull << 10, + 0x0ddull << 10, + 0x1dcull << 10, + 0x1ddull << 10, + 0x2dcull << 10, + 0x2ddull << 10, + 0x3dcull << 10, + 0x3ddull << 10, + 0x2beull << 10, + 0x2bfull << 10, + + 0x0ecull << 10, + 0x0edull << 10, + 0x1ecull << 10, + 0x1edull << 10, + 0x2ecull << 10, + 0x2edull << 10, + 0x3ecull << 10, + 0x3edull << 10, + 0x3aeull << 10, + 0x3afull << 10, + + 0x0fcull << 10, + 0x0fdull << 10, + 0x1fcull << 10, + 0x1fdull << 10, + 0x2fcull << 10, + 0x2fdull << 10, + 0x3fcull << 10, + 0x3fdull << 10, + 0x3beull << 10, + 0x3bfull << 10, + + 0x08eull << 10, + 0x08full << 10, + 0x18eull << 10, + 0x18full << 10, + 0x28eull << 10, + 0x28full << 10, + 0x38eull << 10, + 0x38full << 10, + 0x0eeull << 10, + 0x0efull << 10, + + 0x09eull << 10, + 0x09full << 10, + 0x19eull << 10, + 0x19full << 10, + 0x29eull << 10, + 0x29full << 10, + 0x39eull << 10, + 0x39full << 10, + 0x0feull << 10, + 0x0ffull << 10 +}; + +static const UINT64 b2d3[] = { + 0x000ull << 20, + 0x001ull << 20, + 0x002ull << 20, + 0x003ull << 20, + 0x004ull << 20, + 0x005ull << 20, + 0x006ull << 20, + 0x007ull << 20, + 0x008ull << 20, + 0x009ull << 20, + + 0x010ull << 20, + 0x011ull << 20, + 0x012ull << 20, + 0x013ull << 20, + 0x014ull << 20, + 0x015ull << 20, + 0x016ull << 20, + 0x017ull << 20, + 0x018ull << 20, + 0x019ull << 20, + + 0x020ull << 20, + 0x021ull << 20, + 0x022ull << 20, + 0x023ull << 20, + 0x024ull << 20, + 0x025ull << 20, + 0x026ull << 20, + 0x027ull << 20, + 0x028ull << 20, + 0x029ull << 20, + + 0x030ull << 20, + 0x031ull << 20, + 0x032ull << 20, + 0x033ull << 20, + 0x034ull << 20, + 0x035ull << 20, + 0x036ull << 20, + 0x037ull << 20, + 0x038ull << 20, + 0x039ull << 20, + + 0x040ull << 20, + 0x041ull << 20, + 0x042ull << 20, + 0x043ull << 20, + 0x044ull << 20, + 0x045ull << 20, + 0x046ull << 20, + 0x047ull << 20, + 0x048ull << 20, + 0x049ull << 20, + + 0x050ull << 20, + 0x051ull << 20, + 0x052ull << 20, + 0x053ull << 20, + 0x054ull << 20, + 0x055ull << 20, + 0x056ull << 20, + 0x057ull << 20, + 0x058ull << 20, + 0x059ull << 20, + + 0x060ull << 20, + 0x061ull << 20, + 0x062ull << 20, + 0x063ull << 20, + 0x064ull << 20, + 0x065ull << 20, + 0x066ull << 20, + 0x067ull << 20, + 0x068ull << 20, + 0x069ull << 20, + + 0x070ull << 20, + 0x071ull << 20, + 0x072ull << 20, + 0x073ull << 20, + 0x074ull << 20, + 0x075ull << 20, + 0x076ull << 20, + 0x077ull << 20, + 0x078ull << 20, + 0x079ull << 20, + + 0x00aull << 20, + 0x00bull << 20, + 0x02aull << 20, + 0x02bull << 20, + 0x04aull << 20, + 0x04bull << 20, + 0x06aull << 20, + 0x06bull << 20, + 0x04eull << 20, + 0x04full << 20, + + 0x01aull << 20, + 0x01bull << 20, + 0x03aull << 20, + 0x03bull << 20, + 0x05aull << 20, + 0x05bull << 20, + 0x07aull << 20, + 0x07bull << 20, + 0x05eull << 20, + 0x05full << 20, + + 0x080ull << 20, + 0x081ull << 20, + 0x082ull << 20, + 0x083ull << 20, + 0x084ull << 20, + 0x085ull << 20, + 0x086ull << 20, + 0x087ull << 20, + 0x088ull << 20, + 0x089ull << 20, + + 0x090ull << 20, + 0x091ull << 20, + 0x092ull << 20, + 0x093ull << 20, + 0x094ull << 20, + 0x095ull << 20, + 0x096ull << 20, + 0x097ull << 20, + 0x098ull << 20, + 0x099ull << 20, + + 0x0a0ull << 20, + 0x0a1ull << 20, + 0x0a2ull << 20, + 0x0a3ull << 20, + 0x0a4ull << 20, + 0x0a5ull << 20, + 0x0a6ull << 20, + 0x0a7ull << 20, + 0x0a8ull << 20, + 0x0a9ull << 20, + + 0x0b0ull << 20, + 0x0b1ull << 20, + 0x0b2ull << 20, + 0x0b3ull << 20, + 0x0b4ull << 20, + 0x0b5ull << 20, + 0x0b6ull << 20, + 0x0b7ull << 20, + 0x0b8ull << 20, + 0x0b9ull << 20, + + 0x0c0ull << 20, + 0x0c1ull << 20, + 0x0c2ull << 20, + 0x0c3ull << 20, + 0x0c4ull << 20, + 0x0c5ull << 20, + 0x0c6ull << 20, + 0x0c7ull << 20, + 0x0c8ull << 20, + 0x0c9ull << 20, + + 0x0d0ull << 20, + 0x0d1ull << 20, + 0x0d2ull << 20, + 0x0d3ull << 20, + 0x0d4ull << 20, + 0x0d5ull << 20, + 0x0d6ull << 20, + 0x0d7ull << 20, + 0x0d8ull << 20, + 0x0d9ull << 20, + + 0x0e0ull << 20, + 0x0e1ull << 20, + 0x0e2ull << 20, + 0x0e3ull << 20, + 0x0e4ull << 20, + 0x0e5ull << 20, + 0x0e6ull << 20, + 0x0e7ull << 20, + 0x0e8ull << 20, + 0x0e9ull << 20, + + 0x0f0ull << 20, + 0x0f1ull << 20, + 0x0f2ull << 20, + 0x0f3ull << 20, + 0x0f4ull << 20, + 0x0f5ull << 20, + 0x0f6ull << 20, + 0x0f7ull << 20, + 0x0f8ull << 20, + 0x0f9ull << 20, + + 0x08aull << 20, + 0x08bull << 20, + 0x0aaull << 20, + 0x0abull << 20, + 0x0caull << 20, + 0x0cbull << 20, + 0x0eaull << 20, + 0x0ebull << 20, + 0x0ceull << 20, + 0x0cfull << 20, + + 0x09aull << 20, + 0x09bull << 20, + 0x0baull << 20, + 0x0bbull << 20, + 0x0daull << 20, + 0x0dbull << 20, + 0x0faull << 20, + 0x0fbull << 20, + 0x0deull << 20, + 0x0dfull << 20, + + 0x100ull << 20, + 0x101ull << 20, + 0x102ull << 20, + 0x103ull << 20, + 0x104ull << 20, + 0x105ull << 20, + 0x106ull << 20, + 0x107ull << 20, + 0x108ull << 20, + 0x109ull << 20, + + 0x110ull << 20, + 0x111ull << 20, + 0x112ull << 20, + 0x113ull << 20, + 0x114ull << 20, + 0x115ull << 20, + 0x116ull << 20, + 0x117ull << 20, + 0x118ull << 20, + 0x119ull << 20, + + 0x120ull << 20, + 0x121ull << 20, + 0x122ull << 20, + 0x123ull << 20, + 0x124ull << 20, + 0x125ull << 20, + 0x126ull << 20, + 0x127ull << 20, + 0x128ull << 20, + 0x129ull << 20, + + 0x130ull << 20, + 0x131ull << 20, + 0x132ull << 20, + 0x133ull << 20, + 0x134ull << 20, + 0x135ull << 20, + 0x136ull << 20, + 0x137ull << 20, + 0x138ull << 20, + 0x139ull << 20, + + 0x140ull << 20, + 0x141ull << 20, + 0x142ull << 20, + 0x143ull << 20, + 0x144ull << 20, + 0x145ull << 20, + 0x146ull << 20, + 0x147ull << 20, + 0x148ull << 20, + 0x149ull << 20, + + 0x150ull << 20, + 0x151ull << 20, + 0x152ull << 20, + 0x153ull << 20, + 0x154ull << 20, + 0x155ull << 20, + 0x156ull << 20, + 0x157ull << 20, + 0x158ull << 20, + 0x159ull << 20, + + 0x160ull << 20, + 0x161ull << 20, + 0x162ull << 20, + 0x163ull << 20, + 0x164ull << 20, + 0x165ull << 20, + 0x166ull << 20, + 0x167ull << 20, + 0x168ull << 20, + 0x169ull << 20, + + 0x170ull << 20, + 0x171ull << 20, + 0x172ull << 20, + 0x173ull << 20, + 0x174ull << 20, + 0x175ull << 20, + 0x176ull << 20, + 0x177ull << 20, + 0x178ull << 20, + 0x179ull << 20, + + 0x10aull << 20, + 0x10bull << 20, + 0x12aull << 20, + 0x12bull << 20, + 0x14aull << 20, + 0x14bull << 20, + 0x16aull << 20, + 0x16bull << 20, + 0x14eull << 20, + 0x14full << 20, + + 0x11aull << 20, + 0x11bull << 20, + 0x13aull << 20, + 0x13bull << 20, + 0x15aull << 20, + 0x15bull << 20, + 0x17aull << 20, + 0x17bull << 20, + 0x15eull << 20, + 0x15full << 20, + + 0x180ull << 20, + 0x181ull << 20, + 0x182ull << 20, + 0x183ull << 20, + 0x184ull << 20, + 0x185ull << 20, + 0x186ull << 20, + 0x187ull << 20, + 0x188ull << 20, + 0x189ull << 20, + + 0x190ull << 20, + 0x191ull << 20, + 0x192ull << 20, + 0x193ull << 20, + 0x194ull << 20, + 0x195ull << 20, + 0x196ull << 20, + 0x197ull << 20, + 0x198ull << 20, + 0x199ull << 20, + + 0x1a0ull << 20, + 0x1a1ull << 20, + 0x1a2ull << 20, + 0x1a3ull << 20, + 0x1a4ull << 20, + 0x1a5ull << 20, + 0x1a6ull << 20, + 0x1a7ull << 20, + 0x1a8ull << 20, + 0x1a9ull << 20, + + 0x1b0ull << 20, + 0x1b1ull << 20, + 0x1b2ull << 20, + 0x1b3ull << 20, + 0x1b4ull << 20, + 0x1b5ull << 20, + 0x1b6ull << 20, + 0x1b7ull << 20, + 0x1b8ull << 20, + 0x1b9ull << 20, + + 0x1c0ull << 20, + 0x1c1ull << 20, + 0x1c2ull << 20, + 0x1c3ull << 20, + 0x1c4ull << 20, + 0x1c5ull << 20, + 0x1c6ull << 20, + 0x1c7ull << 20, + 0x1c8ull << 20, + 0x1c9ull << 20, + + 0x1d0ull << 20, + 0x1d1ull << 20, + 0x1d2ull << 20, + 0x1d3ull << 20, + 0x1d4ull << 20, + 0x1d5ull << 20, + 0x1d6ull << 20, + 0x1d7ull << 20, + 0x1d8ull << 20, + 0x1d9ull << 20, + + 0x1e0ull << 20, + 0x1e1ull << 20, + 0x1e2ull << 20, + 0x1e3ull << 20, + 0x1e4ull << 20, + 0x1e5ull << 20, + 0x1e6ull << 20, + 0x1e7ull << 20, + 0x1e8ull << 20, + 0x1e9ull << 20, + + 0x1f0ull << 20, + 0x1f1ull << 20, + 0x1f2ull << 20, + 0x1f3ull << 20, + 0x1f4ull << 20, + 0x1f5ull << 20, + 0x1f6ull << 20, + 0x1f7ull << 20, + 0x1f8ull << 20, + 0x1f9ull << 20, + + 0x18aull << 20, + 0x18bull << 20, + 0x1aaull << 20, + 0x1abull << 20, + 0x1caull << 20, + 0x1cbull << 20, + 0x1eaull << 20, + 0x1ebull << 20, + 0x1ceull << 20, + 0x1cfull << 20, + + 0x19aull << 20, + 0x19bull << 20, + 0x1baull << 20, + 0x1bbull << 20, + 0x1daull << 20, + 0x1dbull << 20, + 0x1faull << 20, + 0x1fbull << 20, + 0x1deull << 20, + 0x1dfull << 20, + + 0x200ull << 20, + 0x201ull << 20, + 0x202ull << 20, + 0x203ull << 20, + 0x204ull << 20, + 0x205ull << 20, + 0x206ull << 20, + 0x207ull << 20, + 0x208ull << 20, + 0x209ull << 20, + + 0x210ull << 20, + 0x211ull << 20, + 0x212ull << 20, + 0x213ull << 20, + 0x214ull << 20, + 0x215ull << 20, + 0x216ull << 20, + 0x217ull << 20, + 0x218ull << 20, + 0x219ull << 20, + + 0x220ull << 20, + 0x221ull << 20, + 0x222ull << 20, + 0x223ull << 20, + 0x224ull << 20, + 0x225ull << 20, + 0x226ull << 20, + 0x227ull << 20, + 0x228ull << 20, + 0x229ull << 20, + + 0x230ull << 20, + 0x231ull << 20, + 0x232ull << 20, + 0x233ull << 20, + 0x234ull << 20, + 0x235ull << 20, + 0x236ull << 20, + 0x237ull << 20, + 0x238ull << 20, + 0x239ull << 20, + + 0x240ull << 20, + 0x241ull << 20, + 0x242ull << 20, + 0x243ull << 20, + 0x244ull << 20, + 0x245ull << 20, + 0x246ull << 20, + 0x247ull << 20, + 0x248ull << 20, + 0x249ull << 20, + + 0x250ull << 20, + 0x251ull << 20, + 0x252ull << 20, + 0x253ull << 20, + 0x254ull << 20, + 0x255ull << 20, + 0x256ull << 20, + 0x257ull << 20, + 0x258ull << 20, + 0x259ull << 20, + + 0x260ull << 20, + 0x261ull << 20, + 0x262ull << 20, + 0x263ull << 20, + 0x264ull << 20, + 0x265ull << 20, + 0x266ull << 20, + 0x267ull << 20, + 0x268ull << 20, + 0x269ull << 20, + + 0x270ull << 20, + 0x271ull << 20, + 0x272ull << 20, + 0x273ull << 20, + 0x274ull << 20, + 0x275ull << 20, + 0x276ull << 20, + 0x277ull << 20, + 0x278ull << 20, + 0x279ull << 20, + + 0x20aull << 20, + 0x20bull << 20, + 0x22aull << 20, + 0x22bull << 20, + 0x24aull << 20, + 0x24bull << 20, + 0x26aull << 20, + 0x26bull << 20, + 0x24eull << 20, + 0x24full << 20, + + 0x21aull << 20, + 0x21bull << 20, + 0x23aull << 20, + 0x23bull << 20, + 0x25aull << 20, + 0x25bull << 20, + 0x27aull << 20, + 0x27bull << 20, + 0x25eull << 20, + 0x25full << 20, + + 0x280ull << 20, + 0x281ull << 20, + 0x282ull << 20, + 0x283ull << 20, + 0x284ull << 20, + 0x285ull << 20, + 0x286ull << 20, + 0x287ull << 20, + 0x288ull << 20, + 0x289ull << 20, + + 0x290ull << 20, + 0x291ull << 20, + 0x292ull << 20, + 0x293ull << 20, + 0x294ull << 20, + 0x295ull << 20, + 0x296ull << 20, + 0x297ull << 20, + 0x298ull << 20, + 0x299ull << 20, + + 0x2a0ull << 20, + 0x2a1ull << 20, + 0x2a2ull << 20, + 0x2a3ull << 20, + 0x2a4ull << 20, + 0x2a5ull << 20, + 0x2a6ull << 20, + 0x2a7ull << 20, + 0x2a8ull << 20, + 0x2a9ull << 20, + + 0x2b0ull << 20, + 0x2b1ull << 20, + 0x2b2ull << 20, + 0x2b3ull << 20, + 0x2b4ull << 20, + 0x2b5ull << 20, + 0x2b6ull << 20, + 0x2b7ull << 20, + 0x2b8ull << 20, + 0x2b9ull << 20, + + 0x2c0ull << 20, + 0x2c1ull << 20, + 0x2c2ull << 20, + 0x2c3ull << 20, + 0x2c4ull << 20, + 0x2c5ull << 20, + 0x2c6ull << 20, + 0x2c7ull << 20, + 0x2c8ull << 20, + 0x2c9ull << 20, + + 0x2d0ull << 20, + 0x2d1ull << 20, + 0x2d2ull << 20, + 0x2d3ull << 20, + 0x2d4ull << 20, + 0x2d5ull << 20, + 0x2d6ull << 20, + 0x2d7ull << 20, + 0x2d8ull << 20, + 0x2d9ull << 20, + + 0x2e0ull << 20, + 0x2e1ull << 20, + 0x2e2ull << 20, + 0x2e3ull << 20, + 0x2e4ull << 20, + 0x2e5ull << 20, + 0x2e6ull << 20, + 0x2e7ull << 20, + 0x2e8ull << 20, + 0x2e9ull << 20, + + 0x2f0ull << 20, + 0x2f1ull << 20, + 0x2f2ull << 20, + 0x2f3ull << 20, + 0x2f4ull << 20, + 0x2f5ull << 20, + 0x2f6ull << 20, + 0x2f7ull << 20, + 0x2f8ull << 20, + 0x2f9ull << 20, + + 0x28aull << 20, + 0x28bull << 20, + 0x2aaull << 20, + 0x2abull << 20, + 0x2caull << 20, + 0x2cbull << 20, + 0x2eaull << 20, + 0x2ebull << 20, + 0x2ceull << 20, + 0x2cfull << 20, + + 0x29aull << 20, + 0x29bull << 20, + 0x2baull << 20, + 0x2bbull << 20, + 0x2daull << 20, + 0x2dbull << 20, + 0x2faull << 20, + 0x2fbull << 20, + 0x2deull << 20, + 0x2dfull << 20, + + 0x300ull << 20, + 0x301ull << 20, + 0x302ull << 20, + 0x303ull << 20, + 0x304ull << 20, + 0x305ull << 20, + 0x306ull << 20, + 0x307ull << 20, + 0x308ull << 20, + 0x309ull << 20, + + 0x310ull << 20, + 0x311ull << 20, + 0x312ull << 20, + 0x313ull << 20, + 0x314ull << 20, + 0x315ull << 20, + 0x316ull << 20, + 0x317ull << 20, + 0x318ull << 20, + 0x319ull << 20, + + 0x320ull << 20, + 0x321ull << 20, + 0x322ull << 20, + 0x323ull << 20, + 0x324ull << 20, + 0x325ull << 20, + 0x326ull << 20, + 0x327ull << 20, + 0x328ull << 20, + 0x329ull << 20, + + 0x330ull << 20, + 0x331ull << 20, + 0x332ull << 20, + 0x333ull << 20, + 0x334ull << 20, + 0x335ull << 20, + 0x336ull << 20, + 0x337ull << 20, + 0x338ull << 20, + 0x339ull << 20, + + 0x340ull << 20, + 0x341ull << 20, + 0x342ull << 20, + 0x343ull << 20, + 0x344ull << 20, + 0x345ull << 20, + 0x346ull << 20, + 0x347ull << 20, + 0x348ull << 20, + 0x349ull << 20, + + 0x350ull << 20, + 0x351ull << 20, + 0x352ull << 20, + 0x353ull << 20, + 0x354ull << 20, + 0x355ull << 20, + 0x356ull << 20, + 0x357ull << 20, + 0x358ull << 20, + 0x359ull << 20, + + 0x360ull << 20, + 0x361ull << 20, + 0x362ull << 20, + 0x363ull << 20, + 0x364ull << 20, + 0x365ull << 20, + 0x366ull << 20, + 0x367ull << 20, + 0x368ull << 20, + 0x369ull << 20, + + 0x370ull << 20, + 0x371ull << 20, + 0x372ull << 20, + 0x373ull << 20, + 0x374ull << 20, + 0x375ull << 20, + 0x376ull << 20, + 0x377ull << 20, + 0x378ull << 20, + 0x379ull << 20, + + 0x30aull << 20, + 0x30bull << 20, + 0x32aull << 20, + 0x32bull << 20, + 0x34aull << 20, + 0x34bull << 20, + 0x36aull << 20, + 0x36bull << 20, + 0x34eull << 20, + 0x34full << 20, + + 0x31aull << 20, + 0x31bull << 20, + 0x33aull << 20, + 0x33bull << 20, + 0x35aull << 20, + 0x35bull << 20, + 0x37aull << 20, + 0x37bull << 20, + 0x35eull << 20, + 0x35full << 20, + + 0x380ull << 20, + 0x381ull << 20, + 0x382ull << 20, + 0x383ull << 20, + 0x384ull << 20, + 0x385ull << 20, + 0x386ull << 20, + 0x387ull << 20, + 0x388ull << 20, + 0x389ull << 20, + + 0x390ull << 20, + 0x391ull << 20, + 0x392ull << 20, + 0x393ull << 20, + 0x394ull << 20, + 0x395ull << 20, + 0x396ull << 20, + 0x397ull << 20, + 0x398ull << 20, + 0x399ull << 20, + + 0x3a0ull << 20, + 0x3a1ull << 20, + 0x3a2ull << 20, + 0x3a3ull << 20, + 0x3a4ull << 20, + 0x3a5ull << 20, + 0x3a6ull << 20, + 0x3a7ull << 20, + 0x3a8ull << 20, + 0x3a9ull << 20, + + 0x3b0ull << 20, + 0x3b1ull << 20, + 0x3b2ull << 20, + 0x3b3ull << 20, + 0x3b4ull << 20, + 0x3b5ull << 20, + 0x3b6ull << 20, + 0x3b7ull << 20, + 0x3b8ull << 20, + 0x3b9ull << 20, + + 0x3c0ull << 20, + 0x3c1ull << 20, + 0x3c2ull << 20, + 0x3c3ull << 20, + 0x3c4ull << 20, + 0x3c5ull << 20, + 0x3c6ull << 20, + 0x3c7ull << 20, + 0x3c8ull << 20, + 0x3c9ull << 20, + + 0x3d0ull << 20, + 0x3d1ull << 20, + 0x3d2ull << 20, + 0x3d3ull << 20, + 0x3d4ull << 20, + 0x3d5ull << 20, + 0x3d6ull << 20, + 0x3d7ull << 20, + 0x3d8ull << 20, + 0x3d9ull << 20, + + 0x3e0ull << 20, + 0x3e1ull << 20, + 0x3e2ull << 20, + 0x3e3ull << 20, + 0x3e4ull << 20, + 0x3e5ull << 20, + 0x3e6ull << 20, + 0x3e7ull << 20, + 0x3e8ull << 20, + 0x3e9ull << 20, + + 0x3f0ull << 20, + 0x3f1ull << 20, + 0x3f2ull << 20, + 0x3f3ull << 20, + 0x3f4ull << 20, + 0x3f5ull << 20, + 0x3f6ull << 20, + 0x3f7ull << 20, + 0x3f8ull << 20, + 0x3f9ull << 20, + + 0x38aull << 20, + 0x38bull << 20, + 0x3aaull << 20, + 0x3abull << 20, + 0x3caull << 20, + 0x3cbull << 20, + 0x3eaull << 20, + 0x3ebull << 20, + 0x3ceull << 20, + 0x3cfull << 20, + + 0x39aull << 20, + 0x39bull << 20, + 0x3baull << 20, + 0x3bbull << 20, + 0x3daull << 20, + 0x3dbull << 20, + 0x3faull << 20, + 0x3fbull << 20, + 0x3deull << 20, + 0x3dfull << 20, + + 0x00cull << 20, + 0x00dull << 20, + 0x10cull << 20, + 0x10dull << 20, + 0x20cull << 20, + 0x20dull << 20, + 0x30cull << 20, + 0x30dull << 20, + 0x02eull << 20, + 0x02full << 20, + + 0x01cull << 20, + 0x01dull << 20, + 0x11cull << 20, + 0x11dull << 20, + 0x21cull << 20, + 0x21dull << 20, + 0x31cull << 20, + 0x31dull << 20, + 0x03eull << 20, + 0x03full << 20, + + 0x02cull << 20, + 0x02dull << 20, + 0x12cull << 20, + 0x12dull << 20, + 0x22cull << 20, + 0x22dull << 20, + 0x32cull << 20, + 0x32dull << 20, + 0x12eull << 20, + 0x12full << 20, + + 0x03cull << 20, + 0x03dull << 20, + 0x13cull << 20, + 0x13dull << 20, + 0x23cull << 20, + 0x23dull << 20, + 0x33cull << 20, + 0x33dull << 20, + 0x13eull << 20, + 0x13full << 20, + + 0x04cull << 20, + 0x04dull << 20, + 0x14cull << 20, + 0x14dull << 20, + 0x24cull << 20, + 0x24dull << 20, + 0x34cull << 20, + 0x34dull << 20, + 0x22eull << 20, + 0x22full << 20, + + 0x05cull << 20, + 0x05dull << 20, + 0x15cull << 20, + 0x15dull << 20, + 0x25cull << 20, + 0x25dull << 20, + 0x35cull << 20, + 0x35dull << 20, + 0x23eull << 20, + 0x23full << 20, + + 0x06cull << 20, + 0x06dull << 20, + 0x16cull << 20, + 0x16dull << 20, + 0x26cull << 20, + 0x26dull << 20, + 0x36cull << 20, + 0x36dull << 20, + 0x32eull << 20, + 0x32full << 20, + + 0x07cull << 20, + 0x07dull << 20, + 0x17cull << 20, + 0x17dull << 20, + 0x27cull << 20, + 0x27dull << 20, + 0x37cull << 20, + 0x37dull << 20, + 0x33eull << 20, + 0x33full << 20, + + 0x00eull << 20, + 0x00full << 20, + 0x10eull << 20, + 0x10full << 20, + 0x20eull << 20, + 0x20full << 20, + 0x30eull << 20, + 0x30full << 20, + 0x06eull << 20, + 0x06full << 20, + + 0x01eull << 20, + 0x01full << 20, + 0x11eull << 20, + 0x11full << 20, + 0x21eull << 20, + 0x21full << 20, + 0x31eull << 20, + 0x31full << 20, + 0x07eull << 20, + 0x07full << 20, + + 0x08cull << 20, + 0x08dull << 20, + 0x18cull << 20, + 0x18dull << 20, + 0x28cull << 20, + 0x28dull << 20, + 0x38cull << 20, + 0x38dull << 20, + 0x0aeull << 20, + 0x0afull << 20, + + 0x09cull << 20, + 0x09dull << 20, + 0x19cull << 20, + 0x19dull << 20, + 0x29cull << 20, + 0x29dull << 20, + 0x39cull << 20, + 0x39dull << 20, + 0x0beull << 20, + 0x0bfull << 20, + + 0x0acull << 20, + 0x0adull << 20, + 0x1acull << 20, + 0x1adull << 20, + 0x2acull << 20, + 0x2adull << 20, + 0x3acull << 20, + 0x3adull << 20, + 0x1aeull << 20, + 0x1afull << 20, + + 0x0bcull << 20, + 0x0bdull << 20, + 0x1bcull << 20, + 0x1bdull << 20, + 0x2bcull << 20, + 0x2bdull << 20, + 0x3bcull << 20, + 0x3bdull << 20, + 0x1beull << 20, + 0x1bfull << 20, + + 0x0ccull << 20, + 0x0cdull << 20, + 0x1ccull << 20, + 0x1cdull << 20, + 0x2ccull << 20, + 0x2cdull << 20, + 0x3ccull << 20, + 0x3cdull << 20, + 0x2aeull << 20, + 0x2afull << 20, + + 0x0dcull << 20, + 0x0ddull << 20, + 0x1dcull << 20, + 0x1ddull << 20, + 0x2dcull << 20, + 0x2ddull << 20, + 0x3dcull << 20, + 0x3ddull << 20, + 0x2beull << 20, + 0x2bfull << 20, + + 0x0ecull << 20, + 0x0edull << 20, + 0x1ecull << 20, + 0x1edull << 20, + 0x2ecull << 20, + 0x2edull << 20, + 0x3ecull << 20, + 0x3edull << 20, + 0x3aeull << 20, + 0x3afull << 20, + + 0x0fcull << 20, + 0x0fdull << 20, + 0x1fcull << 20, + 0x1fdull << 20, + 0x2fcull << 20, + 0x2fdull << 20, + 0x3fcull << 20, + 0x3fdull << 20, + 0x3beull << 20, + 0x3bfull << 20, + + 0x08eull << 20, + 0x08full << 20, + 0x18eull << 20, + 0x18full << 20, + 0x28eull << 20, + 0x28full << 20, + 0x38eull << 20, + 0x38full << 20, + 0x0eeull << 20, + 0x0efull << 20, + + 0x09eull << 20, + 0x09full << 20, + 0x19eull << 20, + 0x19full << 20, + 0x29eull << 20, + 0x29full << 20, + 0x39eull << 20, + 0x39full << 20, + 0x0feull << 20, + 0x0ffull << 20 +}; + +static const UINT64 b2d4[] = { + 0x000ull << 30, + 0x001ull << 30, + 0x002ull << 30, + 0x003ull << 30, + 0x004ull << 30, + 0x005ull << 30, + 0x006ull << 30, + 0x007ull << 30, + 0x008ull << 30, + 0x009ull << 30, + + 0x010ull << 30, + 0x011ull << 30, + 0x012ull << 30, + 0x013ull << 30, + 0x014ull << 30, + 0x015ull << 30, + 0x016ull << 30, + 0x017ull << 30, + 0x018ull << 30, + 0x019ull << 30, + + 0x020ull << 30, + 0x021ull << 30, + 0x022ull << 30, + 0x023ull << 30, + 0x024ull << 30, + 0x025ull << 30, + 0x026ull << 30, + 0x027ull << 30, + 0x028ull << 30, + 0x029ull << 30, + + 0x030ull << 30, + 0x031ull << 30, + 0x032ull << 30, + 0x033ull << 30, + 0x034ull << 30, + 0x035ull << 30, + 0x036ull << 30, + 0x037ull << 30, + 0x038ull << 30, + 0x039ull << 30, + + 0x040ull << 30, + 0x041ull << 30, + 0x042ull << 30, + 0x043ull << 30, + 0x044ull << 30, + 0x045ull << 30, + 0x046ull << 30, + 0x047ull << 30, + 0x048ull << 30, + 0x049ull << 30, + + 0x050ull << 30, + 0x051ull << 30, + 0x052ull << 30, + 0x053ull << 30, + 0x054ull << 30, + 0x055ull << 30, + 0x056ull << 30, + 0x057ull << 30, + 0x058ull << 30, + 0x059ull << 30, + + 0x060ull << 30, + 0x061ull << 30, + 0x062ull << 30, + 0x063ull << 30, + 0x064ull << 30, + 0x065ull << 30, + 0x066ull << 30, + 0x067ull << 30, + 0x068ull << 30, + 0x069ull << 30, + + 0x070ull << 30, + 0x071ull << 30, + 0x072ull << 30, + 0x073ull << 30, + 0x074ull << 30, + 0x075ull << 30, + 0x076ull << 30, + 0x077ull << 30, + 0x078ull << 30, + 0x079ull << 30, + + 0x00aull << 30, + 0x00bull << 30, + 0x02aull << 30, + 0x02bull << 30, + 0x04aull << 30, + 0x04bull << 30, + 0x06aull << 30, + 0x06bull << 30, + 0x04eull << 30, + 0x04full << 30, + + 0x01aull << 30, + 0x01bull << 30, + 0x03aull << 30, + 0x03bull << 30, + 0x05aull << 30, + 0x05bull << 30, + 0x07aull << 30, + 0x07bull << 30, + 0x05eull << 30, + 0x05full << 30, + + 0x080ull << 30, + 0x081ull << 30, + 0x082ull << 30, + 0x083ull << 30, + 0x084ull << 30, + 0x085ull << 30, + 0x086ull << 30, + 0x087ull << 30, + 0x088ull << 30, + 0x089ull << 30, + + 0x090ull << 30, + 0x091ull << 30, + 0x092ull << 30, + 0x093ull << 30, + 0x094ull << 30, + 0x095ull << 30, + 0x096ull << 30, + 0x097ull << 30, + 0x098ull << 30, + 0x099ull << 30, + + 0x0a0ull << 30, + 0x0a1ull << 30, + 0x0a2ull << 30, + 0x0a3ull << 30, + 0x0a4ull << 30, + 0x0a5ull << 30, + 0x0a6ull << 30, + 0x0a7ull << 30, + 0x0a8ull << 30, + 0x0a9ull << 30, + + 0x0b0ull << 30, + 0x0b1ull << 30, + 0x0b2ull << 30, + 0x0b3ull << 30, + 0x0b4ull << 30, + 0x0b5ull << 30, + 0x0b6ull << 30, + 0x0b7ull << 30, + 0x0b8ull << 30, + 0x0b9ull << 30, + + 0x0c0ull << 30, + 0x0c1ull << 30, + 0x0c2ull << 30, + 0x0c3ull << 30, + 0x0c4ull << 30, + 0x0c5ull << 30, + 0x0c6ull << 30, + 0x0c7ull << 30, + 0x0c8ull << 30, + 0x0c9ull << 30, + + 0x0d0ull << 30, + 0x0d1ull << 30, + 0x0d2ull << 30, + 0x0d3ull << 30, + 0x0d4ull << 30, + 0x0d5ull << 30, + 0x0d6ull << 30, + 0x0d7ull << 30, + 0x0d8ull << 30, + 0x0d9ull << 30, + + 0x0e0ull << 30, + 0x0e1ull << 30, + 0x0e2ull << 30, + 0x0e3ull << 30, + 0x0e4ull << 30, + 0x0e5ull << 30, + 0x0e6ull << 30, + 0x0e7ull << 30, + 0x0e8ull << 30, + 0x0e9ull << 30, + + 0x0f0ull << 30, + 0x0f1ull << 30, + 0x0f2ull << 30, + 0x0f3ull << 30, + 0x0f4ull << 30, + 0x0f5ull << 30, + 0x0f6ull << 30, + 0x0f7ull << 30, + 0x0f8ull << 30, + 0x0f9ull << 30, + + 0x08aull << 30, + 0x08bull << 30, + 0x0aaull << 30, + 0x0abull << 30, + 0x0caull << 30, + 0x0cbull << 30, + 0x0eaull << 30, + 0x0ebull << 30, + 0x0ceull << 30, + 0x0cfull << 30, + + 0x09aull << 30, + 0x09bull << 30, + 0x0baull << 30, + 0x0bbull << 30, + 0x0daull << 30, + 0x0dbull << 30, + 0x0faull << 30, + 0x0fbull << 30, + 0x0deull << 30, + 0x0dfull << 30, + + 0x100ull << 30, + 0x101ull << 30, + 0x102ull << 30, + 0x103ull << 30, + 0x104ull << 30, + 0x105ull << 30, + 0x106ull << 30, + 0x107ull << 30, + 0x108ull << 30, + 0x109ull << 30, + + 0x110ull << 30, + 0x111ull << 30, + 0x112ull << 30, + 0x113ull << 30, + 0x114ull << 30, + 0x115ull << 30, + 0x116ull << 30, + 0x117ull << 30, + 0x118ull << 30, + 0x119ull << 30, + + 0x120ull << 30, + 0x121ull << 30, + 0x122ull << 30, + 0x123ull << 30, + 0x124ull << 30, + 0x125ull << 30, + 0x126ull << 30, + 0x127ull << 30, + 0x128ull << 30, + 0x129ull << 30, + + 0x130ull << 30, + 0x131ull << 30, + 0x132ull << 30, + 0x133ull << 30, + 0x134ull << 30, + 0x135ull << 30, + 0x136ull << 30, + 0x137ull << 30, + 0x138ull << 30, + 0x139ull << 30, + + 0x140ull << 30, + 0x141ull << 30, + 0x142ull << 30, + 0x143ull << 30, + 0x144ull << 30, + 0x145ull << 30, + 0x146ull << 30, + 0x147ull << 30, + 0x148ull << 30, + 0x149ull << 30, + + 0x150ull << 30, + 0x151ull << 30, + 0x152ull << 30, + 0x153ull << 30, + 0x154ull << 30, + 0x155ull << 30, + 0x156ull << 30, + 0x157ull << 30, + 0x158ull << 30, + 0x159ull << 30, + + 0x160ull << 30, + 0x161ull << 30, + 0x162ull << 30, + 0x163ull << 30, + 0x164ull << 30, + 0x165ull << 30, + 0x166ull << 30, + 0x167ull << 30, + 0x168ull << 30, + 0x169ull << 30, + + 0x170ull << 30, + 0x171ull << 30, + 0x172ull << 30, + 0x173ull << 30, + 0x174ull << 30, + 0x175ull << 30, + 0x176ull << 30, + 0x177ull << 30, + 0x178ull << 30, + 0x179ull << 30, + + 0x10aull << 30, + 0x10bull << 30, + 0x12aull << 30, + 0x12bull << 30, + 0x14aull << 30, + 0x14bull << 30, + 0x16aull << 30, + 0x16bull << 30, + 0x14eull << 30, + 0x14full << 30, + + 0x11aull << 30, + 0x11bull << 30, + 0x13aull << 30, + 0x13bull << 30, + 0x15aull << 30, + 0x15bull << 30, + 0x17aull << 30, + 0x17bull << 30, + 0x15eull << 30, + 0x15full << 30, + + 0x180ull << 30, + 0x181ull << 30, + 0x182ull << 30, + 0x183ull << 30, + 0x184ull << 30, + 0x185ull << 30, + 0x186ull << 30, + 0x187ull << 30, + 0x188ull << 30, + 0x189ull << 30, + + 0x190ull << 30, + 0x191ull << 30, + 0x192ull << 30, + 0x193ull << 30, + 0x194ull << 30, + 0x195ull << 30, + 0x196ull << 30, + 0x197ull << 30, + 0x198ull << 30, + 0x199ull << 30, + + 0x1a0ull << 30, + 0x1a1ull << 30, + 0x1a2ull << 30, + 0x1a3ull << 30, + 0x1a4ull << 30, + 0x1a5ull << 30, + 0x1a6ull << 30, + 0x1a7ull << 30, + 0x1a8ull << 30, + 0x1a9ull << 30, + + 0x1b0ull << 30, + 0x1b1ull << 30, + 0x1b2ull << 30, + 0x1b3ull << 30, + 0x1b4ull << 30, + 0x1b5ull << 30, + 0x1b6ull << 30, + 0x1b7ull << 30, + 0x1b8ull << 30, + 0x1b9ull << 30, + + 0x1c0ull << 30, + 0x1c1ull << 30, + 0x1c2ull << 30, + 0x1c3ull << 30, + 0x1c4ull << 30, + 0x1c5ull << 30, + 0x1c6ull << 30, + 0x1c7ull << 30, + 0x1c8ull << 30, + 0x1c9ull << 30, + + 0x1d0ull << 30, + 0x1d1ull << 30, + 0x1d2ull << 30, + 0x1d3ull << 30, + 0x1d4ull << 30, + 0x1d5ull << 30, + 0x1d6ull << 30, + 0x1d7ull << 30, + 0x1d8ull << 30, + 0x1d9ull << 30, + + 0x1e0ull << 30, + 0x1e1ull << 30, + 0x1e2ull << 30, + 0x1e3ull << 30, + 0x1e4ull << 30, + 0x1e5ull << 30, + 0x1e6ull << 30, + 0x1e7ull << 30, + 0x1e8ull << 30, + 0x1e9ull << 30, + + 0x1f0ull << 30, + 0x1f1ull << 30, + 0x1f2ull << 30, + 0x1f3ull << 30, + 0x1f4ull << 30, + 0x1f5ull << 30, + 0x1f6ull << 30, + 0x1f7ull << 30, + 0x1f8ull << 30, + 0x1f9ull << 30, + + 0x18aull << 30, + 0x18bull << 30, + 0x1aaull << 30, + 0x1abull << 30, + 0x1caull << 30, + 0x1cbull << 30, + 0x1eaull << 30, + 0x1ebull << 30, + 0x1ceull << 30, + 0x1cfull << 30, + + 0x19aull << 30, + 0x19bull << 30, + 0x1baull << 30, + 0x1bbull << 30, + 0x1daull << 30, + 0x1dbull << 30, + 0x1faull << 30, + 0x1fbull << 30, + 0x1deull << 30, + 0x1dfull << 30, + + 0x200ull << 30, + 0x201ull << 30, + 0x202ull << 30, + 0x203ull << 30, + 0x204ull << 30, + 0x205ull << 30, + 0x206ull << 30, + 0x207ull << 30, + 0x208ull << 30, + 0x209ull << 30, + + 0x210ull << 30, + 0x211ull << 30, + 0x212ull << 30, + 0x213ull << 30, + 0x214ull << 30, + 0x215ull << 30, + 0x216ull << 30, + 0x217ull << 30, + 0x218ull << 30, + 0x219ull << 30, + + 0x220ull << 30, + 0x221ull << 30, + 0x222ull << 30, + 0x223ull << 30, + 0x224ull << 30, + 0x225ull << 30, + 0x226ull << 30, + 0x227ull << 30, + 0x228ull << 30, + 0x229ull << 30, + + 0x230ull << 30, + 0x231ull << 30, + 0x232ull << 30, + 0x233ull << 30, + 0x234ull << 30, + 0x235ull << 30, + 0x236ull << 30, + 0x237ull << 30, + 0x238ull << 30, + 0x239ull << 30, + + 0x240ull << 30, + 0x241ull << 30, + 0x242ull << 30, + 0x243ull << 30, + 0x244ull << 30, + 0x245ull << 30, + 0x246ull << 30, + 0x247ull << 30, + 0x248ull << 30, + 0x249ull << 30, + + 0x250ull << 30, + 0x251ull << 30, + 0x252ull << 30, + 0x253ull << 30, + 0x254ull << 30, + 0x255ull << 30, + 0x256ull << 30, + 0x257ull << 30, + 0x258ull << 30, + 0x259ull << 30, + + 0x260ull << 30, + 0x261ull << 30, + 0x262ull << 30, + 0x263ull << 30, + 0x264ull << 30, + 0x265ull << 30, + 0x266ull << 30, + 0x267ull << 30, + 0x268ull << 30, + 0x269ull << 30, + + 0x270ull << 30, + 0x271ull << 30, + 0x272ull << 30, + 0x273ull << 30, + 0x274ull << 30, + 0x275ull << 30, + 0x276ull << 30, + 0x277ull << 30, + 0x278ull << 30, + 0x279ull << 30, + + 0x20aull << 30, + 0x20bull << 30, + 0x22aull << 30, + 0x22bull << 30, + 0x24aull << 30, + 0x24bull << 30, + 0x26aull << 30, + 0x26bull << 30, + 0x24eull << 30, + 0x24full << 30, + + 0x21aull << 30, + 0x21bull << 30, + 0x23aull << 30, + 0x23bull << 30, + 0x25aull << 30, + 0x25bull << 30, + 0x27aull << 30, + 0x27bull << 30, + 0x25eull << 30, + 0x25full << 30, + + 0x280ull << 30, + 0x281ull << 30, + 0x282ull << 30, + 0x283ull << 30, + 0x284ull << 30, + 0x285ull << 30, + 0x286ull << 30, + 0x287ull << 30, + 0x288ull << 30, + 0x289ull << 30, + + 0x290ull << 30, + 0x291ull << 30, + 0x292ull << 30, + 0x293ull << 30, + 0x294ull << 30, + 0x295ull << 30, + 0x296ull << 30, + 0x297ull << 30, + 0x298ull << 30, + 0x299ull << 30, + + 0x2a0ull << 30, + 0x2a1ull << 30, + 0x2a2ull << 30, + 0x2a3ull << 30, + 0x2a4ull << 30, + 0x2a5ull << 30, + 0x2a6ull << 30, + 0x2a7ull << 30, + 0x2a8ull << 30, + 0x2a9ull << 30, + + 0x2b0ull << 30, + 0x2b1ull << 30, + 0x2b2ull << 30, + 0x2b3ull << 30, + 0x2b4ull << 30, + 0x2b5ull << 30, + 0x2b6ull << 30, + 0x2b7ull << 30, + 0x2b8ull << 30, + 0x2b9ull << 30, + + 0x2c0ull << 30, + 0x2c1ull << 30, + 0x2c2ull << 30, + 0x2c3ull << 30, + 0x2c4ull << 30, + 0x2c5ull << 30, + 0x2c6ull << 30, + 0x2c7ull << 30, + 0x2c8ull << 30, + 0x2c9ull << 30, + + 0x2d0ull << 30, + 0x2d1ull << 30, + 0x2d2ull << 30, + 0x2d3ull << 30, + 0x2d4ull << 30, + 0x2d5ull << 30, + 0x2d6ull << 30, + 0x2d7ull << 30, + 0x2d8ull << 30, + 0x2d9ull << 30, + + 0x2e0ull << 30, + 0x2e1ull << 30, + 0x2e2ull << 30, + 0x2e3ull << 30, + 0x2e4ull << 30, + 0x2e5ull << 30, + 0x2e6ull << 30, + 0x2e7ull << 30, + 0x2e8ull << 30, + 0x2e9ull << 30, + + 0x2f0ull << 30, + 0x2f1ull << 30, + 0x2f2ull << 30, + 0x2f3ull << 30, + 0x2f4ull << 30, + 0x2f5ull << 30, + 0x2f6ull << 30, + 0x2f7ull << 30, + 0x2f8ull << 30, + 0x2f9ull << 30, + + 0x28aull << 30, + 0x28bull << 30, + 0x2aaull << 30, + 0x2abull << 30, + 0x2caull << 30, + 0x2cbull << 30, + 0x2eaull << 30, + 0x2ebull << 30, + 0x2ceull << 30, + 0x2cfull << 30, + + 0x29aull << 30, + 0x29bull << 30, + 0x2baull << 30, + 0x2bbull << 30, + 0x2daull << 30, + 0x2dbull << 30, + 0x2faull << 30, + 0x2fbull << 30, + 0x2deull << 30, + 0x2dfull << 30, + + 0x300ull << 30, + 0x301ull << 30, + 0x302ull << 30, + 0x303ull << 30, + 0x304ull << 30, + 0x305ull << 30, + 0x306ull << 30, + 0x307ull << 30, + 0x308ull << 30, + 0x309ull << 30, + + 0x310ull << 30, + 0x311ull << 30, + 0x312ull << 30, + 0x313ull << 30, + 0x314ull << 30, + 0x315ull << 30, + 0x316ull << 30, + 0x317ull << 30, + 0x318ull << 30, + 0x319ull << 30, + + 0x320ull << 30, + 0x321ull << 30, + 0x322ull << 30, + 0x323ull << 30, + 0x324ull << 30, + 0x325ull << 30, + 0x326ull << 30, + 0x327ull << 30, + 0x328ull << 30, + 0x329ull << 30, + + 0x330ull << 30, + 0x331ull << 30, + 0x332ull << 30, + 0x333ull << 30, + 0x334ull << 30, + 0x335ull << 30, + 0x336ull << 30, + 0x337ull << 30, + 0x338ull << 30, + 0x339ull << 30, + + 0x340ull << 30, + 0x341ull << 30, + 0x342ull << 30, + 0x343ull << 30, + 0x344ull << 30, + 0x345ull << 30, + 0x346ull << 30, + 0x347ull << 30, + 0x348ull << 30, + 0x349ull << 30, + + 0x350ull << 30, + 0x351ull << 30, + 0x352ull << 30, + 0x353ull << 30, + 0x354ull << 30, + 0x355ull << 30, + 0x356ull << 30, + 0x357ull << 30, + 0x358ull << 30, + 0x359ull << 30, + + 0x360ull << 30, + 0x361ull << 30, + 0x362ull << 30, + 0x363ull << 30, + 0x364ull << 30, + 0x365ull << 30, + 0x366ull << 30, + 0x367ull << 30, + 0x368ull << 30, + 0x369ull << 30, + + 0x370ull << 30, + 0x371ull << 30, + 0x372ull << 30, + 0x373ull << 30, + 0x374ull << 30, + 0x375ull << 30, + 0x376ull << 30, + 0x377ull << 30, + 0x378ull << 30, + 0x379ull << 30, + + 0x30aull << 30, + 0x30bull << 30, + 0x32aull << 30, + 0x32bull << 30, + 0x34aull << 30, + 0x34bull << 30, + 0x36aull << 30, + 0x36bull << 30, + 0x34eull << 30, + 0x34full << 30, + + 0x31aull << 30, + 0x31bull << 30, + 0x33aull << 30, + 0x33bull << 30, + 0x35aull << 30, + 0x35bull << 30, + 0x37aull << 30, + 0x37bull << 30, + 0x35eull << 30, + 0x35full << 30, + + 0x380ull << 30, + 0x381ull << 30, + 0x382ull << 30, + 0x383ull << 30, + 0x384ull << 30, + 0x385ull << 30, + 0x386ull << 30, + 0x387ull << 30, + 0x388ull << 30, + 0x389ull << 30, + + 0x390ull << 30, + 0x391ull << 30, + 0x392ull << 30, + 0x393ull << 30, + 0x394ull << 30, + 0x395ull << 30, + 0x396ull << 30, + 0x397ull << 30, + 0x398ull << 30, + 0x399ull << 30, + + 0x3a0ull << 30, + 0x3a1ull << 30, + 0x3a2ull << 30, + 0x3a3ull << 30, + 0x3a4ull << 30, + 0x3a5ull << 30, + 0x3a6ull << 30, + 0x3a7ull << 30, + 0x3a8ull << 30, + 0x3a9ull << 30, + + 0x3b0ull << 30, + 0x3b1ull << 30, + 0x3b2ull << 30, + 0x3b3ull << 30, + 0x3b4ull << 30, + 0x3b5ull << 30, + 0x3b6ull << 30, + 0x3b7ull << 30, + 0x3b8ull << 30, + 0x3b9ull << 30, + + 0x3c0ull << 30, + 0x3c1ull << 30, + 0x3c2ull << 30, + 0x3c3ull << 30, + 0x3c4ull << 30, + 0x3c5ull << 30, + 0x3c6ull << 30, + 0x3c7ull << 30, + 0x3c8ull << 30, + 0x3c9ull << 30, + + 0x3d0ull << 30, + 0x3d1ull << 30, + 0x3d2ull << 30, + 0x3d3ull << 30, + 0x3d4ull << 30, + 0x3d5ull << 30, + 0x3d6ull << 30, + 0x3d7ull << 30, + 0x3d8ull << 30, + 0x3d9ull << 30, + + 0x3e0ull << 30, + 0x3e1ull << 30, + 0x3e2ull << 30, + 0x3e3ull << 30, + 0x3e4ull << 30, + 0x3e5ull << 30, + 0x3e6ull << 30, + 0x3e7ull << 30, + 0x3e8ull << 30, + 0x3e9ull << 30, + + 0x3f0ull << 30, + 0x3f1ull << 30, + 0x3f2ull << 30, + 0x3f3ull << 30, + 0x3f4ull << 30, + 0x3f5ull << 30, + 0x3f6ull << 30, + 0x3f7ull << 30, + 0x3f8ull << 30, + 0x3f9ull << 30, + + 0x38aull << 30, + 0x38bull << 30, + 0x3aaull << 30, + 0x3abull << 30, + 0x3caull << 30, + 0x3cbull << 30, + 0x3eaull << 30, + 0x3ebull << 30, + 0x3ceull << 30, + 0x3cfull << 30, + + 0x39aull << 30, + 0x39bull << 30, + 0x3baull << 30, + 0x3bbull << 30, + 0x3daull << 30, + 0x3dbull << 30, + 0x3faull << 30, + 0x3fbull << 30, + 0x3deull << 30, + 0x3dfull << 30, + + 0x00cull << 30, + 0x00dull << 30, + 0x10cull << 30, + 0x10dull << 30, + 0x20cull << 30, + 0x20dull << 30, + 0x30cull << 30, + 0x30dull << 30, + 0x02eull << 30, + 0x02full << 30, + + 0x01cull << 30, + 0x01dull << 30, + 0x11cull << 30, + 0x11dull << 30, + 0x21cull << 30, + 0x21dull << 30, + 0x31cull << 30, + 0x31dull << 30, + 0x03eull << 30, + 0x03full << 30, + + 0x02cull << 30, + 0x02dull << 30, + 0x12cull << 30, + 0x12dull << 30, + 0x22cull << 30, + 0x22dull << 30, + 0x32cull << 30, + 0x32dull << 30, + 0x12eull << 30, + 0x12full << 30, + + 0x03cull << 30, + 0x03dull << 30, + 0x13cull << 30, + 0x13dull << 30, + 0x23cull << 30, + 0x23dull << 30, + 0x33cull << 30, + 0x33dull << 30, + 0x13eull << 30, + 0x13full << 30, + + 0x04cull << 30, + 0x04dull << 30, + 0x14cull << 30, + 0x14dull << 30, + 0x24cull << 30, + 0x24dull << 30, + 0x34cull << 30, + 0x34dull << 30, + 0x22eull << 30, + 0x22full << 30, + + 0x05cull << 30, + 0x05dull << 30, + 0x15cull << 30, + 0x15dull << 30, + 0x25cull << 30, + 0x25dull << 30, + 0x35cull << 30, + 0x35dull << 30, + 0x23eull << 30, + 0x23full << 30, + + 0x06cull << 30, + 0x06dull << 30, + 0x16cull << 30, + 0x16dull << 30, + 0x26cull << 30, + 0x26dull << 30, + 0x36cull << 30, + 0x36dull << 30, + 0x32eull << 30, + 0x32full << 30, + + 0x07cull << 30, + 0x07dull << 30, + 0x17cull << 30, + 0x17dull << 30, + 0x27cull << 30, + 0x27dull << 30, + 0x37cull << 30, + 0x37dull << 30, + 0x33eull << 30, + 0x33full << 30, + + 0x00eull << 30, + 0x00full << 30, + 0x10eull << 30, + 0x10full << 30, + 0x20eull << 30, + 0x20full << 30, + 0x30eull << 30, + 0x30full << 30, + 0x06eull << 30, + 0x06full << 30, + + 0x01eull << 30, + 0x01full << 30, + 0x11eull << 30, + 0x11full << 30, + 0x21eull << 30, + 0x21full << 30, + 0x31eull << 30, + 0x31full << 30, + 0x07eull << 30, + 0x07full << 30, + + 0x08cull << 30, + 0x08dull << 30, + 0x18cull << 30, + 0x18dull << 30, + 0x28cull << 30, + 0x28dull << 30, + 0x38cull << 30, + 0x38dull << 30, + 0x0aeull << 30, + 0x0afull << 30, + + 0x09cull << 30, + 0x09dull << 30, + 0x19cull << 30, + 0x19dull << 30, + 0x29cull << 30, + 0x29dull << 30, + 0x39cull << 30, + 0x39dull << 30, + 0x0beull << 30, + 0x0bfull << 30, + + 0x0acull << 30, + 0x0adull << 30, + 0x1acull << 30, + 0x1adull << 30, + 0x2acull << 30, + 0x2adull << 30, + 0x3acull << 30, + 0x3adull << 30, + 0x1aeull << 30, + 0x1afull << 30, + + 0x0bcull << 30, + 0x0bdull << 30, + 0x1bcull << 30, + 0x1bdull << 30, + 0x2bcull << 30, + 0x2bdull << 30, + 0x3bcull << 30, + 0x3bdull << 30, + 0x1beull << 30, + 0x1bfull << 30, + + 0x0ccull << 30, + 0x0cdull << 30, + 0x1ccull << 30, + 0x1cdull << 30, + 0x2ccull << 30, + 0x2cdull << 30, + 0x3ccull << 30, + 0x3cdull << 30, + 0x2aeull << 30, + 0x2afull << 30, + + 0x0dcull << 30, + 0x0ddull << 30, + 0x1dcull << 30, + 0x1ddull << 30, + 0x2dcull << 30, + 0x2ddull << 30, + 0x3dcull << 30, + 0x3ddull << 30, + 0x2beull << 30, + 0x2bfull << 30, + + 0x0ecull << 30, + 0x0edull << 30, + 0x1ecull << 30, + 0x1edull << 30, + 0x2ecull << 30, + 0x2edull << 30, + 0x3ecull << 30, + 0x3edull << 30, + 0x3aeull << 30, + 0x3afull << 30, + + 0x0fcull << 30, + 0x0fdull << 30, + 0x1fcull << 30, + 0x1fdull << 30, + 0x2fcull << 30, + 0x2fdull << 30, + 0x3fcull << 30, + 0x3fdull << 30, + 0x3beull << 30, + 0x3bfull << 30, + + 0x08eull << 30, + 0x08full << 30, + 0x18eull << 30, + 0x18full << 30, + 0x28eull << 30, + 0x28full << 30, + 0x38eull << 30, + 0x38full << 30, + 0x0eeull << 30, + 0x0efull << 30, + + 0x09eull << 30, + 0x09full << 30, + 0x19eull << 30, + 0x19full << 30, + 0x29eull << 30, + 0x29full << 30, + 0x39eull << 30, + 0x39full << 30, + 0x0feull << 30, + 0x0ffull << 30 +}; + +static const UINT64 b2d5[] = { + 0x000ull << 40, + 0x001ull << 40, + 0x002ull << 40, + 0x003ull << 40, + 0x004ull << 40, + 0x005ull << 40, + 0x006ull << 40, + 0x007ull << 40, + 0x008ull << 40, + 0x009ull << 40, + + 0x010ull << 40, + 0x011ull << 40, + 0x012ull << 40, + 0x013ull << 40, + 0x014ull << 40, + 0x015ull << 40, + 0x016ull << 40, + 0x017ull << 40, + 0x018ull << 40, + 0x019ull << 40, + + 0x020ull << 40, + 0x021ull << 40, + 0x022ull << 40, + 0x023ull << 40, + 0x024ull << 40, + 0x025ull << 40, + 0x026ull << 40, + 0x027ull << 40, + 0x028ull << 40, + 0x029ull << 40, + + 0x030ull << 40, + 0x031ull << 40, + 0x032ull << 40, + 0x033ull << 40, + 0x034ull << 40, + 0x035ull << 40, + 0x036ull << 40, + 0x037ull << 40, + 0x038ull << 40, + 0x039ull << 40, + + 0x040ull << 40, + 0x041ull << 40, + 0x042ull << 40, + 0x043ull << 40, + 0x044ull << 40, + 0x045ull << 40, + 0x046ull << 40, + 0x047ull << 40, + 0x048ull << 40, + 0x049ull << 40, + + 0x050ull << 40, + 0x051ull << 40, + 0x052ull << 40, + 0x053ull << 40, + 0x054ull << 40, + 0x055ull << 40, + 0x056ull << 40, + 0x057ull << 40, + 0x058ull << 40, + 0x059ull << 40, + + 0x060ull << 40, + 0x061ull << 40, + 0x062ull << 40, + 0x063ull << 40, + 0x064ull << 40, + 0x065ull << 40, + 0x066ull << 40, + 0x067ull << 40, + 0x068ull << 40, + 0x069ull << 40, + + 0x070ull << 40, + 0x071ull << 40, + 0x072ull << 40, + 0x073ull << 40, + 0x074ull << 40, + 0x075ull << 40, + 0x076ull << 40, + 0x077ull << 40, + 0x078ull << 40, + 0x079ull << 40, + + 0x00aull << 40, + 0x00bull << 40, + 0x02aull << 40, + 0x02bull << 40, + 0x04aull << 40, + 0x04bull << 40, + 0x06aull << 40, + 0x06bull << 40, + 0x04eull << 40, + 0x04full << 40, + + 0x01aull << 40, + 0x01bull << 40, + 0x03aull << 40, + 0x03bull << 40, + 0x05aull << 40, + 0x05bull << 40, + 0x07aull << 40, + 0x07bull << 40, + 0x05eull << 40, + 0x05full << 40, + + 0x080ull << 40, + 0x081ull << 40, + 0x082ull << 40, + 0x083ull << 40, + 0x084ull << 40, + 0x085ull << 40, + 0x086ull << 40, + 0x087ull << 40, + 0x088ull << 40, + 0x089ull << 40, + + 0x090ull << 40, + 0x091ull << 40, + 0x092ull << 40, + 0x093ull << 40, + 0x094ull << 40, + 0x095ull << 40, + 0x096ull << 40, + 0x097ull << 40, + 0x098ull << 40, + 0x099ull << 40, + + 0x0a0ull << 40, + 0x0a1ull << 40, + 0x0a2ull << 40, + 0x0a3ull << 40, + 0x0a4ull << 40, + 0x0a5ull << 40, + 0x0a6ull << 40, + 0x0a7ull << 40, + 0x0a8ull << 40, + 0x0a9ull << 40, + + 0x0b0ull << 40, + 0x0b1ull << 40, + 0x0b2ull << 40, + 0x0b3ull << 40, + 0x0b4ull << 40, + 0x0b5ull << 40, + 0x0b6ull << 40, + 0x0b7ull << 40, + 0x0b8ull << 40, + 0x0b9ull << 40, + + 0x0c0ull << 40, + 0x0c1ull << 40, + 0x0c2ull << 40, + 0x0c3ull << 40, + 0x0c4ull << 40, + 0x0c5ull << 40, + 0x0c6ull << 40, + 0x0c7ull << 40, + 0x0c8ull << 40, + 0x0c9ull << 40, + + 0x0d0ull << 40, + 0x0d1ull << 40, + 0x0d2ull << 40, + 0x0d3ull << 40, + 0x0d4ull << 40, + 0x0d5ull << 40, + 0x0d6ull << 40, + 0x0d7ull << 40, + 0x0d8ull << 40, + 0x0d9ull << 40, + + 0x0e0ull << 40, + 0x0e1ull << 40, + 0x0e2ull << 40, + 0x0e3ull << 40, + 0x0e4ull << 40, + 0x0e5ull << 40, + 0x0e6ull << 40, + 0x0e7ull << 40, + 0x0e8ull << 40, + 0x0e9ull << 40, + + 0x0f0ull << 40, + 0x0f1ull << 40, + 0x0f2ull << 40, + 0x0f3ull << 40, + 0x0f4ull << 40, + 0x0f5ull << 40, + 0x0f6ull << 40, + 0x0f7ull << 40, + 0x0f8ull << 40, + 0x0f9ull << 40, + + 0x08aull << 40, + 0x08bull << 40, + 0x0aaull << 40, + 0x0abull << 40, + 0x0caull << 40, + 0x0cbull << 40, + 0x0eaull << 40, + 0x0ebull << 40, + 0x0ceull << 40, + 0x0cfull << 40, + + 0x09aull << 40, + 0x09bull << 40, + 0x0baull << 40, + 0x0bbull << 40, + 0x0daull << 40, + 0x0dbull << 40, + 0x0faull << 40, + 0x0fbull << 40, + 0x0deull << 40, + 0x0dfull << 40, + + 0x100ull << 40, + 0x101ull << 40, + 0x102ull << 40, + 0x103ull << 40, + 0x104ull << 40, + 0x105ull << 40, + 0x106ull << 40, + 0x107ull << 40, + 0x108ull << 40, + 0x109ull << 40, + + 0x110ull << 40, + 0x111ull << 40, + 0x112ull << 40, + 0x113ull << 40, + 0x114ull << 40, + 0x115ull << 40, + 0x116ull << 40, + 0x117ull << 40, + 0x118ull << 40, + 0x119ull << 40, + + 0x120ull << 40, + 0x121ull << 40, + 0x122ull << 40, + 0x123ull << 40, + 0x124ull << 40, + 0x125ull << 40, + 0x126ull << 40, + 0x127ull << 40, + 0x128ull << 40, + 0x129ull << 40, + + 0x130ull << 40, + 0x131ull << 40, + 0x132ull << 40, + 0x133ull << 40, + 0x134ull << 40, + 0x135ull << 40, + 0x136ull << 40, + 0x137ull << 40, + 0x138ull << 40, + 0x139ull << 40, + + 0x140ull << 40, + 0x141ull << 40, + 0x142ull << 40, + 0x143ull << 40, + 0x144ull << 40, + 0x145ull << 40, + 0x146ull << 40, + 0x147ull << 40, + 0x148ull << 40, + 0x149ull << 40, + + 0x150ull << 40, + 0x151ull << 40, + 0x152ull << 40, + 0x153ull << 40, + 0x154ull << 40, + 0x155ull << 40, + 0x156ull << 40, + 0x157ull << 40, + 0x158ull << 40, + 0x159ull << 40, + + 0x160ull << 40, + 0x161ull << 40, + 0x162ull << 40, + 0x163ull << 40, + 0x164ull << 40, + 0x165ull << 40, + 0x166ull << 40, + 0x167ull << 40, + 0x168ull << 40, + 0x169ull << 40, + + 0x170ull << 40, + 0x171ull << 40, + 0x172ull << 40, + 0x173ull << 40, + 0x174ull << 40, + 0x175ull << 40, + 0x176ull << 40, + 0x177ull << 40, + 0x178ull << 40, + 0x179ull << 40, + + 0x10aull << 40, + 0x10bull << 40, + 0x12aull << 40, + 0x12bull << 40, + 0x14aull << 40, + 0x14bull << 40, + 0x16aull << 40, + 0x16bull << 40, + 0x14eull << 40, + 0x14full << 40, + + 0x11aull << 40, + 0x11bull << 40, + 0x13aull << 40, + 0x13bull << 40, + 0x15aull << 40, + 0x15bull << 40, + 0x17aull << 40, + 0x17bull << 40, + 0x15eull << 40, + 0x15full << 40, + + 0x180ull << 40, + 0x181ull << 40, + 0x182ull << 40, + 0x183ull << 40, + 0x184ull << 40, + 0x185ull << 40, + 0x186ull << 40, + 0x187ull << 40, + 0x188ull << 40, + 0x189ull << 40, + + 0x190ull << 40, + 0x191ull << 40, + 0x192ull << 40, + 0x193ull << 40, + 0x194ull << 40, + 0x195ull << 40, + 0x196ull << 40, + 0x197ull << 40, + 0x198ull << 40, + 0x199ull << 40, + + 0x1a0ull << 40, + 0x1a1ull << 40, + 0x1a2ull << 40, + 0x1a3ull << 40, + 0x1a4ull << 40, + 0x1a5ull << 40, + 0x1a6ull << 40, + 0x1a7ull << 40, + 0x1a8ull << 40, + 0x1a9ull << 40, + + 0x1b0ull << 40, + 0x1b1ull << 40, + 0x1b2ull << 40, + 0x1b3ull << 40, + 0x1b4ull << 40, + 0x1b5ull << 40, + 0x1b6ull << 40, + 0x1b7ull << 40, + 0x1b8ull << 40, + 0x1b9ull << 40, + + 0x1c0ull << 40, + 0x1c1ull << 40, + 0x1c2ull << 40, + 0x1c3ull << 40, + 0x1c4ull << 40, + 0x1c5ull << 40, + 0x1c6ull << 40, + 0x1c7ull << 40, + 0x1c8ull << 40, + 0x1c9ull << 40, + + 0x1d0ull << 40, + 0x1d1ull << 40, + 0x1d2ull << 40, + 0x1d3ull << 40, + 0x1d4ull << 40, + 0x1d5ull << 40, + 0x1d6ull << 40, + 0x1d7ull << 40, + 0x1d8ull << 40, + 0x1d9ull << 40, + + 0x1e0ull << 40, + 0x1e1ull << 40, + 0x1e2ull << 40, + 0x1e3ull << 40, + 0x1e4ull << 40, + 0x1e5ull << 40, + 0x1e6ull << 40, + 0x1e7ull << 40, + 0x1e8ull << 40, + 0x1e9ull << 40, + + 0x1f0ull << 40, + 0x1f1ull << 40, + 0x1f2ull << 40, + 0x1f3ull << 40, + 0x1f4ull << 40, + 0x1f5ull << 40, + 0x1f6ull << 40, + 0x1f7ull << 40, + 0x1f8ull << 40, + 0x1f9ull << 40, + + 0x18aull << 40, + 0x18bull << 40, + 0x1aaull << 40, + 0x1abull << 40, + 0x1caull << 40, + 0x1cbull << 40, + 0x1eaull << 40, + 0x1ebull << 40, + 0x1ceull << 40, + 0x1cfull << 40, + + 0x19aull << 40, + 0x19bull << 40, + 0x1baull << 40, + 0x1bbull << 40, + 0x1daull << 40, + 0x1dbull << 40, + 0x1faull << 40, + 0x1fbull << 40, + 0x1deull << 40, + 0x1dfull << 40, + + 0x200ull << 40, + 0x201ull << 40, + 0x202ull << 40, + 0x203ull << 40, + 0x204ull << 40, + 0x205ull << 40, + 0x206ull << 40, + 0x207ull << 40, + 0x208ull << 40, + 0x209ull << 40, + + 0x210ull << 40, + 0x211ull << 40, + 0x212ull << 40, + 0x213ull << 40, + 0x214ull << 40, + 0x215ull << 40, + 0x216ull << 40, + 0x217ull << 40, + 0x218ull << 40, + 0x219ull << 40, + + 0x220ull << 40, + 0x221ull << 40, + 0x222ull << 40, + 0x223ull << 40, + 0x224ull << 40, + 0x225ull << 40, + 0x226ull << 40, + 0x227ull << 40, + 0x228ull << 40, + 0x229ull << 40, + + 0x230ull << 40, + 0x231ull << 40, + 0x232ull << 40, + 0x233ull << 40, + 0x234ull << 40, + 0x235ull << 40, + 0x236ull << 40, + 0x237ull << 40, + 0x238ull << 40, + 0x239ull << 40, + + 0x240ull << 40, + 0x241ull << 40, + 0x242ull << 40, + 0x243ull << 40, + 0x244ull << 40, + 0x245ull << 40, + 0x246ull << 40, + 0x247ull << 40, + 0x248ull << 40, + 0x249ull << 40, + + 0x250ull << 40, + 0x251ull << 40, + 0x252ull << 40, + 0x253ull << 40, + 0x254ull << 40, + 0x255ull << 40, + 0x256ull << 40, + 0x257ull << 40, + 0x258ull << 40, + 0x259ull << 40, + + 0x260ull << 40, + 0x261ull << 40, + 0x262ull << 40, + 0x263ull << 40, + 0x264ull << 40, + 0x265ull << 40, + 0x266ull << 40, + 0x267ull << 40, + 0x268ull << 40, + 0x269ull << 40, + + 0x270ull << 40, + 0x271ull << 40, + 0x272ull << 40, + 0x273ull << 40, + 0x274ull << 40, + 0x275ull << 40, + 0x276ull << 40, + 0x277ull << 40, + 0x278ull << 40, + 0x279ull << 40, + + 0x20aull << 40, + 0x20bull << 40, + 0x22aull << 40, + 0x22bull << 40, + 0x24aull << 40, + 0x24bull << 40, + 0x26aull << 40, + 0x26bull << 40, + 0x24eull << 40, + 0x24full << 40, + + 0x21aull << 40, + 0x21bull << 40, + 0x23aull << 40, + 0x23bull << 40, + 0x25aull << 40, + 0x25bull << 40, + 0x27aull << 40, + 0x27bull << 40, + 0x25eull << 40, + 0x25full << 40, + + 0x280ull << 40, + 0x281ull << 40, + 0x282ull << 40, + 0x283ull << 40, + 0x284ull << 40, + 0x285ull << 40, + 0x286ull << 40, + 0x287ull << 40, + 0x288ull << 40, + 0x289ull << 40, + + 0x290ull << 40, + 0x291ull << 40, + 0x292ull << 40, + 0x293ull << 40, + 0x294ull << 40, + 0x295ull << 40, + 0x296ull << 40, + 0x297ull << 40, + 0x298ull << 40, + 0x299ull << 40, + + 0x2a0ull << 40, + 0x2a1ull << 40, + 0x2a2ull << 40, + 0x2a3ull << 40, + 0x2a4ull << 40, + 0x2a5ull << 40, + 0x2a6ull << 40, + 0x2a7ull << 40, + 0x2a8ull << 40, + 0x2a9ull << 40, + + 0x2b0ull << 40, + 0x2b1ull << 40, + 0x2b2ull << 40, + 0x2b3ull << 40, + 0x2b4ull << 40, + 0x2b5ull << 40, + 0x2b6ull << 40, + 0x2b7ull << 40, + 0x2b8ull << 40, + 0x2b9ull << 40, + + 0x2c0ull << 40, + 0x2c1ull << 40, + 0x2c2ull << 40, + 0x2c3ull << 40, + 0x2c4ull << 40, + 0x2c5ull << 40, + 0x2c6ull << 40, + 0x2c7ull << 40, + 0x2c8ull << 40, + 0x2c9ull << 40, + + 0x2d0ull << 40, + 0x2d1ull << 40, + 0x2d2ull << 40, + 0x2d3ull << 40, + 0x2d4ull << 40, + 0x2d5ull << 40, + 0x2d6ull << 40, + 0x2d7ull << 40, + 0x2d8ull << 40, + 0x2d9ull << 40, + + 0x2e0ull << 40, + 0x2e1ull << 40, + 0x2e2ull << 40, + 0x2e3ull << 40, + 0x2e4ull << 40, + 0x2e5ull << 40, + 0x2e6ull << 40, + 0x2e7ull << 40, + 0x2e8ull << 40, + 0x2e9ull << 40, + + 0x2f0ull << 40, + 0x2f1ull << 40, + 0x2f2ull << 40, + 0x2f3ull << 40, + 0x2f4ull << 40, + 0x2f5ull << 40, + 0x2f6ull << 40, + 0x2f7ull << 40, + 0x2f8ull << 40, + 0x2f9ull << 40, + + 0x28aull << 40, + 0x28bull << 40, + 0x2aaull << 40, + 0x2abull << 40, + 0x2caull << 40, + 0x2cbull << 40, + 0x2eaull << 40, + 0x2ebull << 40, + 0x2ceull << 40, + 0x2cfull << 40, + + 0x29aull << 40, + 0x29bull << 40, + 0x2baull << 40, + 0x2bbull << 40, + 0x2daull << 40, + 0x2dbull << 40, + 0x2faull << 40, + 0x2fbull << 40, + 0x2deull << 40, + 0x2dfull << 40, + + 0x300ull << 40, + 0x301ull << 40, + 0x302ull << 40, + 0x303ull << 40, + 0x304ull << 40, + 0x305ull << 40, + 0x306ull << 40, + 0x307ull << 40, + 0x308ull << 40, + 0x309ull << 40, + + 0x310ull << 40, + 0x311ull << 40, + 0x312ull << 40, + 0x313ull << 40, + 0x314ull << 40, + 0x315ull << 40, + 0x316ull << 40, + 0x317ull << 40, + 0x318ull << 40, + 0x319ull << 40, + + 0x320ull << 40, + 0x321ull << 40, + 0x322ull << 40, + 0x323ull << 40, + 0x324ull << 40, + 0x325ull << 40, + 0x326ull << 40, + 0x327ull << 40, + 0x328ull << 40, + 0x329ull << 40, + + 0x330ull << 40, + 0x331ull << 40, + 0x332ull << 40, + 0x333ull << 40, + 0x334ull << 40, + 0x335ull << 40, + 0x336ull << 40, + 0x337ull << 40, + 0x338ull << 40, + 0x339ull << 40, + + 0x340ull << 40, + 0x341ull << 40, + 0x342ull << 40, + 0x343ull << 40, + 0x344ull << 40, + 0x345ull << 40, + 0x346ull << 40, + 0x347ull << 40, + 0x348ull << 40, + 0x349ull << 40, + + 0x350ull << 40, + 0x351ull << 40, + 0x352ull << 40, + 0x353ull << 40, + 0x354ull << 40, + 0x355ull << 40, + 0x356ull << 40, + 0x357ull << 40, + 0x358ull << 40, + 0x359ull << 40, + + 0x360ull << 40, + 0x361ull << 40, + 0x362ull << 40, + 0x363ull << 40, + 0x364ull << 40, + 0x365ull << 40, + 0x366ull << 40, + 0x367ull << 40, + 0x368ull << 40, + 0x369ull << 40, + + 0x370ull << 40, + 0x371ull << 40, + 0x372ull << 40, + 0x373ull << 40, + 0x374ull << 40, + 0x375ull << 40, + 0x376ull << 40, + 0x377ull << 40, + 0x378ull << 40, + 0x379ull << 40, + + 0x30aull << 40, + 0x30bull << 40, + 0x32aull << 40, + 0x32bull << 40, + 0x34aull << 40, + 0x34bull << 40, + 0x36aull << 40, + 0x36bull << 40, + 0x34eull << 40, + 0x34full << 40, + + 0x31aull << 40, + 0x31bull << 40, + 0x33aull << 40, + 0x33bull << 40, + 0x35aull << 40, + 0x35bull << 40, + 0x37aull << 40, + 0x37bull << 40, + 0x35eull << 40, + 0x35full << 40, + + 0x380ull << 40, + 0x381ull << 40, + 0x382ull << 40, + 0x383ull << 40, + 0x384ull << 40, + 0x385ull << 40, + 0x386ull << 40, + 0x387ull << 40, + 0x388ull << 40, + 0x389ull << 40, + + 0x390ull << 40, + 0x391ull << 40, + 0x392ull << 40, + 0x393ull << 40, + 0x394ull << 40, + 0x395ull << 40, + 0x396ull << 40, + 0x397ull << 40, + 0x398ull << 40, + 0x399ull << 40, + + 0x3a0ull << 40, + 0x3a1ull << 40, + 0x3a2ull << 40, + 0x3a3ull << 40, + 0x3a4ull << 40, + 0x3a5ull << 40, + 0x3a6ull << 40, + 0x3a7ull << 40, + 0x3a8ull << 40, + 0x3a9ull << 40, + + 0x3b0ull << 40, + 0x3b1ull << 40, + 0x3b2ull << 40, + 0x3b3ull << 40, + 0x3b4ull << 40, + 0x3b5ull << 40, + 0x3b6ull << 40, + 0x3b7ull << 40, + 0x3b8ull << 40, + 0x3b9ull << 40, + + 0x3c0ull << 40, + 0x3c1ull << 40, + 0x3c2ull << 40, + 0x3c3ull << 40, + 0x3c4ull << 40, + 0x3c5ull << 40, + 0x3c6ull << 40, + 0x3c7ull << 40, + 0x3c8ull << 40, + 0x3c9ull << 40, + + 0x3d0ull << 40, + 0x3d1ull << 40, + 0x3d2ull << 40, + 0x3d3ull << 40, + 0x3d4ull << 40, + 0x3d5ull << 40, + 0x3d6ull << 40, + 0x3d7ull << 40, + 0x3d8ull << 40, + 0x3d9ull << 40, + + 0x3e0ull << 40, + 0x3e1ull << 40, + 0x3e2ull << 40, + 0x3e3ull << 40, + 0x3e4ull << 40, + 0x3e5ull << 40, + 0x3e6ull << 40, + 0x3e7ull << 40, + 0x3e8ull << 40, + 0x3e9ull << 40, + + 0x3f0ull << 40, + 0x3f1ull << 40, + 0x3f2ull << 40, + 0x3f3ull << 40, + 0x3f4ull << 40, + 0x3f5ull << 40, + 0x3f6ull << 40, + 0x3f7ull << 40, + 0x3f8ull << 40, + 0x3f9ull << 40, + + 0x38aull << 40, + 0x38bull << 40, + 0x3aaull << 40, + 0x3abull << 40, + 0x3caull << 40, + 0x3cbull << 40, + 0x3eaull << 40, + 0x3ebull << 40, + 0x3ceull << 40, + 0x3cfull << 40, + + 0x39aull << 40, + 0x39bull << 40, + 0x3baull << 40, + 0x3bbull << 40, + 0x3daull << 40, + 0x3dbull << 40, + 0x3faull << 40, + 0x3fbull << 40, + 0x3deull << 40, + 0x3dfull << 40, + + 0x00cull << 40, + 0x00dull << 40, + 0x10cull << 40, + 0x10dull << 40, + 0x20cull << 40, + 0x20dull << 40, + 0x30cull << 40, + 0x30dull << 40, + 0x02eull << 40, + 0x02full << 40, + + 0x01cull << 40, + 0x01dull << 40, + 0x11cull << 40, + 0x11dull << 40, + 0x21cull << 40, + 0x21dull << 40, + 0x31cull << 40, + 0x31dull << 40, + 0x03eull << 40, + 0x03full << 40, + + 0x02cull << 40, + 0x02dull << 40, + 0x12cull << 40, + 0x12dull << 40, + 0x22cull << 40, + 0x22dull << 40, + 0x32cull << 40, + 0x32dull << 40, + 0x12eull << 40, + 0x12full << 40, + + 0x03cull << 40, + 0x03dull << 40, + 0x13cull << 40, + 0x13dull << 40, + 0x23cull << 40, + 0x23dull << 40, + 0x33cull << 40, + 0x33dull << 40, + 0x13eull << 40, + 0x13full << 40, + + 0x04cull << 40, + 0x04dull << 40, + 0x14cull << 40, + 0x14dull << 40, + 0x24cull << 40, + 0x24dull << 40, + 0x34cull << 40, + 0x34dull << 40, + 0x22eull << 40, + 0x22full << 40, + + 0x05cull << 40, + 0x05dull << 40, + 0x15cull << 40, + 0x15dull << 40, + 0x25cull << 40, + 0x25dull << 40, + 0x35cull << 40, + 0x35dull << 40, + 0x23eull << 40, + 0x23full << 40, + + 0x06cull << 40, + 0x06dull << 40, + 0x16cull << 40, + 0x16dull << 40, + 0x26cull << 40, + 0x26dull << 40, + 0x36cull << 40, + 0x36dull << 40, + 0x32eull << 40, + 0x32full << 40, + + 0x07cull << 40, + 0x07dull << 40, + 0x17cull << 40, + 0x17dull << 40, + 0x27cull << 40, + 0x27dull << 40, + 0x37cull << 40, + 0x37dull << 40, + 0x33eull << 40, + 0x33full << 40, + + 0x00eull << 40, + 0x00full << 40, + 0x10eull << 40, + 0x10full << 40, + 0x20eull << 40, + 0x20full << 40, + 0x30eull << 40, + 0x30full << 40, + 0x06eull << 40, + 0x06full << 40, + + 0x01eull << 40, + 0x01full << 40, + 0x11eull << 40, + 0x11full << 40, + 0x21eull << 40, + 0x21full << 40, + 0x31eull << 40, + 0x31full << 40, + 0x07eull << 40, + 0x07full << 40, + + 0x08cull << 40, + 0x08dull << 40, + 0x18cull << 40, + 0x18dull << 40, + 0x28cull << 40, + 0x28dull << 40, + 0x38cull << 40, + 0x38dull << 40, + 0x0aeull << 40, + 0x0afull << 40, + + 0x09cull << 40, + 0x09dull << 40, + 0x19cull << 40, + 0x19dull << 40, + 0x29cull << 40, + 0x29dull << 40, + 0x39cull << 40, + 0x39dull << 40, + 0x0beull << 40, + 0x0bfull << 40, + + 0x0acull << 40, + 0x0adull << 40, + 0x1acull << 40, + 0x1adull << 40, + 0x2acull << 40, + 0x2adull << 40, + 0x3acull << 40, + 0x3adull << 40, + 0x1aeull << 40, + 0x1afull << 40, + + 0x0bcull << 40, + 0x0bdull << 40, + 0x1bcull << 40, + 0x1bdull << 40, + 0x2bcull << 40, + 0x2bdull << 40, + 0x3bcull << 40, + 0x3bdull << 40, + 0x1beull << 40, + 0x1bfull << 40, + + 0x0ccull << 40, + 0x0cdull << 40, + 0x1ccull << 40, + 0x1cdull << 40, + 0x2ccull << 40, + 0x2cdull << 40, + 0x3ccull << 40, + 0x3cdull << 40, + 0x2aeull << 40, + 0x2afull << 40, + + 0x0dcull << 40, + 0x0ddull << 40, + 0x1dcull << 40, + 0x1ddull << 40, + 0x2dcull << 40, + 0x2ddull << 40, + 0x3dcull << 40, + 0x3ddull << 40, + 0x2beull << 40, + 0x2bfull << 40, + + 0x0ecull << 40, + 0x0edull << 40, + 0x1ecull << 40, + 0x1edull << 40, + 0x2ecull << 40, + 0x2edull << 40, + 0x3ecull << 40, + 0x3edull << 40, + 0x3aeull << 40, + 0x3afull << 40, + + 0x0fcull << 40, + 0x0fdull << 40, + 0x1fcull << 40, + 0x1fdull << 40, + 0x2fcull << 40, + 0x2fdull << 40, + 0x3fcull << 40, + 0x3fdull << 40, + 0x3beull << 40, + 0x3bfull << 40, + + 0x08eull << 40, + 0x08full << 40, + 0x18eull << 40, + 0x18full << 40, + 0x28eull << 40, + 0x28full << 40, + 0x38eull << 40, + 0x38full << 40, + 0x0eeull << 40, + 0x0efull << 40, + + 0x09eull << 40, + 0x09full << 40, + 0x19eull << 40, + 0x19full << 40, + 0x29eull << 40, + 0x29full << 40, + 0x39eull << 40, + 0x39full << 40, + 0x0feull << 40, + 0x0ffull << 40 +}; + diff --git a/libdecnumber/bid/decimal128.c b/libdecnumber/bid/decimal128.c new file mode 100644 index 0000000..1daf5df --- /dev/null +++ b/libdecnumber/bid/decimal128.c @@ -0,0 +1,148 @@ +/* Copyright (C) 2007 + Free Software Foundation, Inc. + +This file is part of GCC. + +GCC is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2, or (at your option) any later +version. + +GCC is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +for more details. + +You should have received a copy of the GNU General Public License +along with GCC; see the file COPYING. If not, write to the Free +Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA +02110-1301, USA. */ + +/* As a special exception, if you link this library with other files, + some of which are compiled with GCC, to produce an executable, + this library does not by itself cause the resulting executable + to be covered by the GNU General Public License. + This exception does not however invalidate any other reasons why + the executable file might be covered by the GNU General Public License. */ + +#define decimal128FromString __dpd128FromString +#define decimal128ToString __dpd128ToString +#define decimal128ToEngString __dpd128ToEngString +#define decimal128FromNumber __dpd128FromNumber +#define decimal128ToNumber __dpd128ToNumber + +#include "dpd/decimal128.c" + +#undef decimal128FromString +#undef decimal128ToString +#undef decimal128ToEngString +#undef decimal128FromNumber +#undef decimal128ToNumber + +#include "bid-dpd.h" + +#ifdef IN_LIBGCC2 +#define decimal128FromString __decimal128FromString +#define decimal128ToString __decimal128ToString +#define decimal128ToEngString __decimal128ToEngString +#define decimal128FromNumber __decimal128FromNumber +#define decimal128ToNumber __decimal128ToNumber +#endif + +decimal128 *decimal128FromString (decimal128 *, const char *, decContext *); +char *decimal128ToString (const decimal128 *, char *); +char *decimal128ToEngString (const decimal128 *, char *); +decimal128 *decimal128FromNumber (decimal128 *, const decNumber *, decContext *); +decNumber *decimal128ToNumber (const decimal128 *, decNumber *); + +void __host_to_ieee_128 (_Decimal128 in, decimal128 *out); +void __ieee_to_host_128 (decimal128 in, _Decimal128 *out); + +decimal128 * +decimal128FromNumber (decimal128 *d128, const decNumber *dn, + decContext *set) +{ + /* decimal128 and _Decimal128 are different types. */ + union + { + _Decimal128 _Dec; + decimal128 dec; + } u; + + __dpd128FromNumber (d128, dn, set); + + /* __dpd128FromNumber returns in big endian. But _dpd_to_bid128 takes + host endian. */ + __ieee_to_host_128 (*d128, &u._Dec); + + /* Convert DPD to BID. */ + _dpd_to_bid128 (&u._Dec, &u._Dec); + + /* dfp.c is in bid endian. */ + __host_to_ieee_128 (u._Dec, &u.dec); + + /* d128 is returned as a pointer to _Decimal128 here. */ + *d128 = u.dec; + + return d128; +} + +decNumber * +decimal128ToNumber (const decimal128 *bid128, decNumber *dn) +{ + /* decimal128 and _Decimal128 are different types. */ + union + { + _Decimal128 _Dec; + decimal128 dec; + } u; + + /* bid128 is a pointer to _Decimal128 in bid endian. But _bid_to_dpd128 + takes host endian. */ + __ieee_to_host_128 (*bid128, &u._Dec); + + /* Convert BID to DPD. */ + _bid_to_dpd128 (&u._Dec, &u._Dec); + + /* __dpd128ToNumber is in bid endian. */ + __host_to_ieee_128 (u._Dec, &u.dec); + + return __dpd128ToNumber (&u.dec, dn); +} + +char * +decimal128ToString (const decimal128 *d128, char *string) +{ + decNumber dn; /* work */ + decimal128ToNumber (d128, &dn); + decNumberToString (&dn, string); + return string; +} + +char * +decimal128ToEngString (const decimal128 *d128, char *string) +{ + decNumber dn; /* work */ + decimal128ToNumber (d128, &dn); + decNumberToEngString (&dn, string); + return string; +} + +decimal128 * +decimal128FromString (decimal128 *result, const char *string, + decContext *set) +{ + decContext dc; /* work */ + decNumber dn; /* .. */ + + decContextDefault (&dc, DEC_INIT_DECIMAL128); /* no traps, please */ + dc.round = set->round; /* use supplied rounding */ + + decNumberFromString (&dn, string, &dc); /* will round if needed */ + decimal128FromNumber (result, &dn, &dc); + if (dc.status != 0) + { /* something happened */ + decContextSetStatus (set, dc.status); /* .. pass it on */ + } + return result; +} diff --git a/libdecnumber/bid/decimal128.h b/libdecnumber/bid/decimal128.h new file mode 100644 index 0000000..1387352 --- /dev/null +++ b/libdecnumber/bid/decimal128.h @@ -0,0 +1 @@ +#include "dpd/decimal128.h" diff --git a/libdecnumber/bid/decimal128Local.h b/libdecnumber/bid/decimal128Local.h new file mode 100644 index 0000000..e499d73 --- /dev/null +++ b/libdecnumber/bid/decimal128Local.h @@ -0,0 +1 @@ +#include "dpd/decimal128Local.h" diff --git a/libdecnumber/bid/decimal128Symbols.h b/libdecnumber/bid/decimal128Symbols.h new file mode 100644 index 0000000..1775711 --- /dev/null +++ b/libdecnumber/bid/decimal128Symbols.h @@ -0,0 +1 @@ +#include "dpd/decimal128Symbols.h" diff --git a/libdecnumber/bid/decimal32.c b/libdecnumber/bid/decimal32.c new file mode 100644 index 0000000..68e004e --- /dev/null +++ b/libdecnumber/bid/decimal32.c @@ -0,0 +1,148 @@ +/* Copyright (C) 2007 + Free Software Foundation, Inc. + +This file is part of GCC. + +GCC is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2, or (at your option) any later +version. + +GCC is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +for more details. + +You should have received a copy of the GNU General Public License +along with GCC; see the file COPYING. If not, write to the Free +Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA +02110-1301, USA. */ + +/* As a special exception, if you link this library with other files, + some of which are compiled with GCC, to produce an executable, + this library does not by itself cause the resulting executable + to be covered by the GNU General Public License. + This exception does not however invalidate any other reasons why + the executable file might be covered by the GNU General Public License. */ + +#define decimal32FromString __dpd32FromString +#define decimal32ToString __dpd32ToString +#define decimal32ToEngString __dpd32ToEngString +#define decimal32FromNumber __dpd32FromNumber +#define decimal32ToNumber __dpd32ToNumber + +#include "dpd/decimal32.c" + +#undef decimal32FromString +#undef decimal32ToString +#undef decimal32ToEngString +#undef decimal32FromNumber +#undef decimal32ToNumber + +#include "bid-dpd.h" + +#ifdef IN_LIBGCC2 +#define decimal32FromString __decimal32FromString +#define decimal32ToString __decimal32ToString +#define decimal32ToEngString __decimal32ToEngString +#define decimal32FromNumber __decimal32FromNumber +#define decimal32ToNumber __decimal32ToNumber +#endif + +decimal32 *decimal32FromString (decimal32 *, const char *, decContext *); +char *decimal32ToString (const decimal32 *, char *); +char *decimal32ToEngString (const decimal32 *, char *); +decimal32 *decimal32FromNumber (decimal32 *, const decNumber *, decContext *); +decNumber *decimal32ToNumber (const decimal32 *, decNumber *); + +void __host_to_ieee_32 (_Decimal32 in, decimal32 *out); +void __ieee_to_host_32 (decimal32 in, _Decimal32 *out); + +decimal32 * +decimal32FromNumber (decimal32 *d32, const decNumber *dn, + decContext *set) +{ + /* decimal32 and _Decimal32 are different types. */ + union + { + _Decimal32 _Dec; + decimal32 dec; + } u; + + __dpd32FromNumber (d32, dn, set); + + /* __dpd32FromNumber returns in big endian. But _dpd_to_bid32 takes + host endian. */ + __ieee_to_host_32 (*d32, &u._Dec); + + /* Convert DPD to BID. */ + _dpd_to_bid32 (&u._Dec, &u._Dec); + + /* dfp.c is in bid endian. */ + __host_to_ieee_32 (u._Dec, &u.dec); + + /* d32 is returned as a pointer to _Decimal32 here. */ + *d32 = u.dec; + + return d32; +} + +decNumber * +decimal32ToNumber (const decimal32 *bid32, decNumber *dn) +{ + /* decimal32 and _Decimal32 are different types. */ + union + { + _Decimal32 _Dec; + decimal32 dec; + } u; + + /* bid32 is a pointer to _Decimal32 in bid endian. But _bid_to_dpd32 + takes host endian. */ + __ieee_to_host_32 (*bid32, &u._Dec); + + /* Convert BID to DPD. */ + _bid_to_dpd32 (&u._Dec, &u._Dec); + + /* __dpd32ToNumber is in bid endian. */ + __host_to_ieee_32 (u._Dec, &u.dec); + + return __dpd32ToNumber (&u.dec, dn); +} + +char * +decimal32ToString (const decimal32 *d32, char *string) +{ + decNumber dn; /* work */ + decimal32ToNumber (d32, &dn); + decNumberToString (&dn, string); + return string; +} + +char * +decimal32ToEngString (const decimal32 *d32, char *string) +{ + decNumber dn; /* work */ + decimal32ToNumber (d32, &dn); + decNumberToEngString (&dn, string); + return string; +} + +decimal32 * +decimal32FromString (decimal32 *result, const char *string, + decContext *set) +{ + decContext dc; /* work */ + decNumber dn; /* .. */ + + decContextDefault (&dc, DEC_INIT_DECIMAL32); /* no traps, please */ + dc.round = set->round; /* use supplied rounding */ + + decNumberFromString (&dn, string, &dc); /* will round if needed */ + decimal32FromNumber (result, &dn, &dc); + if (dc.status != 0) + { /* something happened */ + decContextSetStatus (set, dc.status); /* .. pass it on */ + } + return result; +} diff --git a/libdecnumber/bid/decimal32.h b/libdecnumber/bid/decimal32.h new file mode 100644 index 0000000..e12e3b1 --- /dev/null +++ b/libdecnumber/bid/decimal32.h @@ -0,0 +1 @@ +#include "dpd/decimal32.h" diff --git a/libdecnumber/bid/decimal32Symbols.h b/libdecnumber/bid/decimal32Symbols.h new file mode 100644 index 0000000..a0c4bf8 --- /dev/null +++ b/libdecnumber/bid/decimal32Symbols.h @@ -0,0 +1 @@ +#include "dpd/decimal32Symbols.h" diff --git a/libdecnumber/bid/decimal64.c b/libdecnumber/bid/decimal64.c new file mode 100644 index 0000000..bdbee38 --- /dev/null +++ b/libdecnumber/bid/decimal64.c @@ -0,0 +1,148 @@ +/* Copyright (C) 2007 + Free Software Foundation, Inc. + +This file is part of GCC. + +GCC is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2, or (at your option) any later +version. + +GCC is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +for more details. + +You should have received a copy of the GNU General Public License +along with GCC; see the file COPYING. If not, write to the Free +Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA +02110-1301, USA. */ + +/* As a special exception, if you link this library with other files, + some of which are compiled with GCC, to produce an executable, + this library does not by itself cause the resulting executable + to be covered by the GNU General Public License. + This exception does not however invalidate any other reasons why + the executable file might be covered by the GNU General Public License. */ + +#define decimal64FromString __dpd64FromString +#define decimal64ToString __dpd64ToString +#define decimal64ToEngString __dpd64ToEngString +#define decimal64FromNumber __dpd64FromNumber +#define decimal64ToNumber __dpd64ToNumber + +#include "dpd/decimal64.c" + +#undef decimal64FromString +#undef decimal64ToString +#undef decimal64ToEngString +#undef decimal64FromNumber +#undef decimal64ToNumber + +#include "bid-dpd.h" + +#ifdef IN_LIBGCC2 +#define decimal64FromString __decimal64FromString +#define decimal64ToString __decimal64ToString +#define decimal64ToEngString __decimal64ToEngString +#define decimal64FromNumber __decimal64FromNumber +#define decimal64ToNumber __decimal64ToNumber +#endif + +decimal64 *decimal64FromString (decimal64 *, const char *, decContext *); +char *decimal64ToString (const decimal64 *, char *); +char *decimal64ToEngString (const decimal64 *, char *); +decimal64 *decimal64FromNumber (decimal64 *, const decNumber *, decContext *); +decNumber *decimal64ToNumber (const decimal64 *, decNumber *); + +void __host_to_ieee_64 (_Decimal64 in, decimal64 *out); +void __ieee_to_host_64 (decimal64 in, _Decimal64 *out); + +decimal64 * +decimal64FromNumber (decimal64 *d64, const decNumber *dn, + decContext *set) +{ + /* decimal64 and _Decimal64 are different types. */ + union + { + _Decimal64 _Dec; + decimal64 dec; + } u; + + __dpd64FromNumber (d64, dn, set); + + /* __dpd64FromNumber returns in big endian. But _dpd_to_bid64 takes + host endian. */ + __ieee_to_host_64 (*d64, &u._Dec); + + /* Convert DPD to BID. */ + _dpd_to_bid64 (&u._Dec, &u._Dec); + + /* dfp.c is in bid endian. */ + __host_to_ieee_64 (u._Dec, &u.dec); + + /* d64 is returned as a pointer to _Decimal64 here. */ + *d64 = u.dec; + + return d64; +} + +decNumber * +decimal64ToNumber (const decimal64 *bid64, decNumber *dn) +{ + /* decimal64 and _Decimal64 are different types. */ + union + { + _Decimal64 _Dec; + decimal64 dec; + } u; + + /* bid64 is a pointer to _Decimal64 in bid endian. But _bid_to_dpd64 + takes host endian. */ + __ieee_to_host_64 (*bid64, &u._Dec); + + /* Convert BID to DPD. */ + _bid_to_dpd64 (&u._Dec, &u._Dec); + + /* __dpd64ToNumber is in bid endian. */ + __host_to_ieee_64 (u._Dec, &u.dec); + + return __dpd64ToNumber (&u.dec, dn); +} + +char * +decimal64ToString (const decimal64 *d64, char *string) +{ + decNumber dn; /* work */ + decimal64ToNumber (d64, &dn); + decNumberToString (&dn, string); + return string; +} + +char * +decimal64ToEngString (const decimal64 *d64, char *string) +{ + decNumber dn; /* work */ + decimal64ToNumber (d64, &dn); + decNumberToEngString (&dn, string); + return string; +} + +decimal64 * +decimal64FromString (decimal64 *result, const char *string, + decContext *set) +{ + decContext dc; /* work */ + decNumber dn; /* .. */ + + decContextDefault (&dc, DEC_INIT_DECIMAL64); /* no traps, please */ + dc.round = set->round; /* use supplied rounding */ + + decNumberFromString (&dn, string, &dc); /* will round if needed */ + decimal64FromNumber (result, &dn, &dc); + if (dc.status != 0) + { /* something happened */ + decContextSetStatus (set, dc.status); /* .. pass it on */ + } + return result; +} diff --git a/libdecnumber/bid/decimal64.h b/libdecnumber/bid/decimal64.h new file mode 100644 index 0000000..94d4d0c --- /dev/null +++ b/libdecnumber/bid/decimal64.h @@ -0,0 +1 @@ +#include "dpd/decimal64.h" diff --git a/libdecnumber/bid/decimal64Symbols.h b/libdecnumber/bid/decimal64Symbols.h new file mode 100644 index 0000000..5f3069c --- /dev/null +++ b/libdecnumber/bid/decimal64Symbols.h @@ -0,0 +1 @@ +#include "dpd/decimal64Symbols.h" diff --git a/libdecnumber/bid/host-ieee128.c b/libdecnumber/bid/host-ieee128.c new file mode 100644 index 0000000..6d493e5 --- /dev/null +++ b/libdecnumber/bid/host-ieee128.c @@ -0,0 +1,48 @@ +/* This is a software decimal floating point library. + Copyright (C) 2007 Free Software Foundation, Inc. + +This file is part of GCC. + +GCC is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2, or (at your option) any later +version. + +In addition to the permissions in the GNU General Public License, the +Free Software Foundation gives you unlimited permission to link the +compiled version of this file into combinations with other programs, +and to distribute those combinations without any restriction coming +from the use of this file. (The General Public License restrictions +do apply in other respects; for example, they cover modification of +the file, and distribution when not linked into a combine +executable.) + +GCC is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +for more details. + +You should have received a copy of the GNU General Public License +along with GCC; see the file COPYING. If not, write to the Free +Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA +02110-1301, USA. */ + +#include <string.h> + +#include "bid-dpd.h" +#include "decimal128.h" + +void __host_to_ieee_128 (_Decimal128 in, decimal128 *out); +void __ieee_to_host_128 (decimal128 in, _Decimal128 *out); + +void +__host_to_ieee_128 (_Decimal128 in, decimal128 *out) +{ + memcpy ((char *) out, (char *) &in, 16); +} + +void +__ieee_to_host_128 (decimal128 in, _Decimal128 *out) +{ + memcpy ((char *) out, (char *) &in, 16); +} diff --git a/libdecnumber/bid/host-ieee32.c b/libdecnumber/bid/host-ieee32.c new file mode 100644 index 0000000..9a59c93 --- /dev/null +++ b/libdecnumber/bid/host-ieee32.c @@ -0,0 +1,57 @@ +/* This is a software decimal floating point library. + Copyright (C) 2007 Free Software Foundation, Inc. + +This file is part of GCC. + +GCC is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2, or (at your option) any later +version. + +In addition to the permissions in the GNU General Public License, the +Free Software Foundation gives you unlimited permission to link the +compiled version of this file into combinations with other programs, +and to distribute those combinations without any restriction coming +from the use of this file. (The General Public License restrictions +do apply in other respects; for example, they cover modification of +the file, and distribution when not linked into a combine +executable.) + +GCC is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +for more details. + +You should have received a copy of the GNU General Public License +along with GCC; see the file COPYING. If not, write to the Free +Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA +02110-1301, USA. */ + +/* This implements IEEE 754R decimal floating point arithmetic, but + does not provide a mechanism for setting the rounding mode, or for + generating or handling exceptions. Conversions between decimal + floating point types and other types depend on C library functions. + + Contributed by Ben Elliston <bje@au.ibm.com>. */ + +/* The intended way to use this file is to make two copies, add `#define ' + to one copy, then compile both copies and add them to libgcc.a. */ + +#include <string.h> +#include "bid-dpd.h" +#include "decimal32.h" + +void __host_to_ieee_32 (_Decimal32 in, decimal32 *out); +void __ieee_to_host_32 (decimal32 in, _Decimal32 *out); + +void +__host_to_ieee_32 (_Decimal32 in, decimal32 *out) +{ + memcpy ((char *) out, (char *) &in, 4); +} + +void +__ieee_to_host_32 (decimal32 in, _Decimal32 *out) +{ + memcpy ((char *) out, (char *) &in, 4); +} diff --git a/libdecnumber/bid/host-ieee64.c b/libdecnumber/bid/host-ieee64.c new file mode 100644 index 0000000..ac6cd84 --- /dev/null +++ b/libdecnumber/bid/host-ieee64.c @@ -0,0 +1,57 @@ +/* This is a software decimal floating point library. + Copyright (C) 2007 Free Software Foundation, Inc. + +This file is part of GCC. + +GCC is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free +Software Foundation; either version 2, or (at your option) any later +version. + +In addition to the permissions in the GNU General Public License, the +Free Software Foundation gives you unlimited permission to link the +compiled version of this file into combinations with other programs, +and to distribute those combinations without any restriction coming +from the use of this file. (The General Public License restrictions +do apply in other respects; for example, they cover modification of +the file, and distribution when not linked into a combine +executable.) + +GCC is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +for more details. + +You should have received a copy of the GNU General Public License +along with GCC; see the file COPYING. If not, write to the Free +Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA +02110-1301, USA. */ + +/* This implements IEEE 754R decimal floating point arithmetic, but + does not provide a mechanism for setting the rounding mode, or for + generating or handling exceptions. Conversions between decimal + floating point types and other types depend on C library functions. + + Contributed by Ben Elliston <bje@au.ibm.com>. */ + +/* The intended way to use this file is to make two copies, add `#define ' + to one copy, then compile both copies and add them to libgcc.a. */ + +#include <string.h> +#include "bid-dpd.h" +#include "decimal64.h" + +void __host_to_ieee_64 (_Decimal64 in, decimal64 *out); +void __ieee_to_host_64 (decimal64 in, _Decimal64 *out); + +void +__host_to_ieee_64 (_Decimal64 in, decimal64 *out) +{ + memcpy ((char *) out, (char *) &in, 8); +} + +void +__ieee_to_host_64 (decimal64 in, _Decimal64 *out) +{ + memcpy ((char *) out, (char *) &in, 8); +} diff --git a/libdecnumber/config.in b/libdecnumber/config.in new file mode 100644 index 0000000..b25b9e9 --- /dev/null +++ b/libdecnumber/config.in @@ -0,0 +1,80 @@ +/* config.in. Generated from configure.ac by autoheader. */ + +/* Define to 1 if you have the <ctype.h> header file. */ +#undef HAVE_CTYPE_H + +/* Define to 1 if you have the <inttypes.h> header file. */ +#undef HAVE_INTTYPES_H + +/* Define to 1 if you have the <memory.h> header file. */ +#undef HAVE_MEMORY_H + +/* Define to 1 if you have the <stddef.h> header file. */ +#undef HAVE_STDDEF_H + +/* Define to 1 if you have the <stdint.h> header file. */ +#undef HAVE_STDINT_H + +/* Define to 1 if you have the <stdio.h> header file. */ +#undef HAVE_STDIO_H + +/* Define to 1 if you have the <stdlib.h> header file. */ +#undef HAVE_STDLIB_H + +/* Define to 1 if you have the <strings.h> header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the <string.h> header file. */ +#undef HAVE_STRING_H + +/* Define to 1 if you have the <sys/stat.h> header file. */ +#undef HAVE_SYS_STAT_H + +/* Define to 1 if you have the <sys/types.h> header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if you have the <unistd.h> header file. */ +#undef HAVE_UNISTD_H + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* The size of a `char', as computed by sizeof. */ +#undef SIZEOF_CHAR + +/* The size of a `int', as computed by sizeof. */ +#undef SIZEOF_INT + +/* The size of a `long', as computed by sizeof. */ +#undef SIZEOF_LONG + +/* The size of a `short', as computed by sizeof. */ +#undef SIZEOF_SHORT + +/* The size of a `void *', as computed by sizeof. */ +#undef SIZEOF_VOID_P + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Define to 1 if your processor stores words with the most significant byte + first (like Motorola and SPARC, unlike Intel and VAX). */ +#undef WORDS_BIGENDIAN + +/* Define to empty if `const' does not conform to ANSI C. */ +#undef const + +/* Define to `long' if <sys/types.h> does not define. */ +#undef off_t diff --git a/libdecnumber/configure b/libdecnumber/configure new file mode 100755 index 0000000..a105bb0 --- /dev/null +++ b/libdecnumber/configure @@ -0,0 +1,9329 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.59 for libdecnumber . +# +# Report bugs to <gcc-bugs@gcc.gnu.org>. +# +# Copyright (C) 2003 Free Software Foundation, Inc. +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +exec 6>&1 + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_config_libobj_dir=. +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Maximum number of lines to put in a shell here document. +# This variable seems obsolete. It should probably be removed, and +# only ac_max_sed_lines should be used. +: ${ac_max_here_lines=38} + +# Identity of this package. +PACKAGE_NAME='libdecnumber' +PACKAGE_TARNAME='libdecnumber' +PACKAGE_VERSION=' ' +PACKAGE_STRING='libdecnumber ' +PACKAGE_BUGREPORT='gcc-bugs@gcc.gnu.org' + +ac_unique_file="decNumber.h" +# Factoring default headers for most tests. +ac_includes_default="\ +#include <stdio.h> +#if HAVE_SYS_TYPES_H +# include <sys/types.h> +#endif +#if HAVE_SYS_STAT_H +# include <sys/stat.h> +#endif +#if STDC_HEADERS +# include <stdlib.h> +# include <stddef.h> +#else +# if HAVE_STDLIB_H +# include <stdlib.h> +# endif +#endif +#if HAVE_STRING_H +# if !STDC_HEADERS && HAVE_MEMORY_H +# include <memory.h> +# endif +# include <string.h> +#endif +#if HAVE_STRINGS_H +# include <strings.h> +#endif +#if HAVE_INTTYPES_H +# include <inttypes.h> +#else +# if HAVE_STDINT_H +# include <stdint.h> +# endif +#endif +#if HAVE_UNISTD_H +# include <unistd.h> +#endif" + +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS SET_MAKE CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT RANLIB ac_ct_RANLIB ACLOCAL AUTOCONF AUTOHEADER WARN_CFLAGS WARN_PEDANTIC WERROR CPP EGREP MAINT build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os enable_decimal_float LIBOBJS LTLIBOBJS' +ac_subst_files='' + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +ac_prev= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_option in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + eval "enable_$ac_feature=no" ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "enable_$ac_feature='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package| sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "with_$ac_package='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/-/_/g'` + eval "with_$ac_package=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) { echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` + eval "$ac_envvar='$ac_optarg'" + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } +fi + +# Be sure to have absolute paths. +for ac_var in exec_prefix prefix +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* | NONE | '' ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# Be sure to have absolute paths. +for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ + localstatedir libdir includedir oldincludedir infodir mandir +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_confdir=`(dirname "$0") 2>/dev/null || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 + { (exit 1); exit 1; }; } + else + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } + fi +fi +(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } +srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +ac_env_build_alias_set=${build_alias+set} +ac_env_build_alias_value=$build_alias +ac_cv_env_build_alias_set=${build_alias+set} +ac_cv_env_build_alias_value=$build_alias +ac_env_host_alias_set=${host_alias+set} +ac_env_host_alias_value=$host_alias +ac_cv_env_host_alias_set=${host_alias+set} +ac_cv_env_host_alias_value=$host_alias +ac_env_target_alias_set=${target_alias+set} +ac_env_target_alias_value=$target_alias +ac_cv_env_target_alias_set=${target_alias+set} +ac_cv_env_target_alias_value=$target_alias +ac_env_CC_set=${CC+set} +ac_env_CC_value=$CC +ac_cv_env_CC_set=${CC+set} +ac_cv_env_CC_value=$CC +ac_env_CFLAGS_set=${CFLAGS+set} +ac_env_CFLAGS_value=$CFLAGS +ac_cv_env_CFLAGS_set=${CFLAGS+set} +ac_cv_env_CFLAGS_value=$CFLAGS +ac_env_LDFLAGS_set=${LDFLAGS+set} +ac_env_LDFLAGS_value=$LDFLAGS +ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +ac_cv_env_LDFLAGS_value=$LDFLAGS +ac_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_env_CPPFLAGS_value=$CPPFLAGS +ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_cv_env_CPPFLAGS_value=$CPPFLAGS +ac_env_CPP_set=${CPP+set} +ac_env_CPP_value=$CPP +ac_cv_env_CPP_set=${CPP+set} +ac_cv_env_CPP_value=$CPP + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures libdecnumber to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +_ACEOF + + cat <<_ACEOF +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --infodir=DIR info documentation [PREFIX/info] + --mandir=DIR man documentation [PREFIX/man] +_ACEOF + + cat <<\_ACEOF + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] + --target=TARGET configure for building compilers for TARGET [HOST] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of libdecnumber :";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-werror-always enable -Werror despite compiler version + --enable-maintainer-mode enable rules only needed by maintainers + --enable-decimal-float={no,yes,bid,dpd} + enable decimal float extension to C. Selecting 'bid' + or 'dpd' choses which decimal floating point format + to use + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a + nonstandard directory <lib dir> + CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have + headers in a nonstandard directory <include dir> + CPP C preprocessor + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to <gcc-bugs@gcc.gnu.org>. +_ACEOF +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d $ac_dir || continue + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + cd $ac_dir + # Check for guested configure; otherwise get Cygnus style configure. + if test -f $ac_srcdir/configure.gnu; then + echo + $SHELL $ac_srcdir/configure.gnu --help=recursive + elif test -f $ac_srcdir/configure; then + echo + $SHELL $ac_srcdir/configure --help=recursive + elif test -f $ac_srcdir/configure.ac || + test -f $ac_srcdir/configure.in; then + echo + $ac_configure --help + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi + cd $ac_popdir + done +fi + +test -n "$ac_init_help" && exit 0 +if $ac_init_version; then + cat <<\_ACEOF +libdecnumber configure +generated by GNU Autoconf 2.59 + +Copyright (C) 2003 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit 0 +fi +exec 5>config.log +cat >&5 <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by libdecnumber $as_me , which was +generated by GNU Autoconf 2.59. Invocation command line was + + $ $0 $@ + +_ACEOF +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +hostinfo = `(hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_sep= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + # Get rid of the leading space. + ac_sep=" " + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Be sure not to use single quotes in there, as some shells, +# such as our DU 5.0 friend, will then `close' the trap. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +{ + (set) 2>&1 | + case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in + *ac_space=\ *) + sed -n \ + "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" + ;; + *) + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------- ## +## Output files. ## +## ------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + sed "/^$/d" confdefs.h | sort + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core && + rm -rf conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status + ' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo >confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . $cache_file;; + *) . ./$cache_file;; + esac + fi +else + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in `(set) 2>&1 | + sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val="\$ac_cv_env_${ac_var}_value" + eval ac_new_val="\$ac_env_${ac_var}_value" + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + + + + + + + + + + + + + + + + + + + + + + + + +case ../config in + [\\/]* | ?:[\\/]* ) ac_macro_dir=../config ;; + *) ac_macro_dir=$srcdir/../config ;; +esac +if test -d "$ac_macro_dir"; then : +else + { { echo "$as_me:$LINENO: error: cannot find macro directory \`../config'" >&5 +echo "$as_me: error: cannot find macro directory \`../config'" >&2;} + { (exit 1); exit 1; }; } +fi + + +# Checks for programs. +echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` +if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.make <<\_ACEOF +all: + @echo 'ac_maketemp="$(MAKE)"' +_ACEOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes +else + eval ac_cv_prog_make_${ac_make}_set=no +fi +rm -f conftest.make +fi +if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + SET_MAKE= +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + SET_MAKE="MAKE=${MAKE-make}" +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$ac_ct_CC" && break +done + + CC=$ac_ct_CC +fi + +fi + + +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + +# Provide some information about the compiler. +echo "$as_me:$LINENO:" \ + "checking for C compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 + (eval $ac_compiler --version </dev/null >&5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 + (eval $ac_compiler -v </dev/null >&5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 + (eval $ac_compiler -V </dev/null >&5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 +ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 + (eval $ac_link_default) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Find the output, starting from the most likely. This scheme is +# not robust to junk in `.', hence go to wildcards (a.*) only as a last +# resort. + +# Be careful to initialize this variable, since it used to be cached. +# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +ac_cv_exeext= +# b.out is created by i960 compilers. +for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) + ;; + conftest.$ac_ext ) + # This is the source file. + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + # FIXME: I believe we export ac_cv_exeext for Libtool, + # but it would be cool to find out if it's true. Does anybody + # maintain Libtool? --akim. + export ac_cv_exeext + break;; + * ) + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; } +fi + +ac_exeext=$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_file" >&5 +echo "${ECHO_T}$ac_file" >&6 + +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 +# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +# If not cross compiling, check that we can run a simple program. +if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + fi +fi +echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + +rm -f a.out a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +echo "$as_me:$LINENO: result: $cross_compiling" >&5 +echo "${ECHO_T}$cross_compiling" >&6 + +echo "$as_me:$LINENO: checking for suffix of executables" >&5 +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + export ac_cv_exeext + break;; + * ) break;; + esac +done +else + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +echo "${ECHO_T}$ac_cv_exeext" >&6 + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +echo "$as_me:$LINENO: checking for suffix of object files" >&5 +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 +if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +echo "${ECHO_T}$ac_cv_objext" >&6 +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_compiler_gnu=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_compiler_gnu=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +GCC=`test $ac_compiler_gnu = yes && echo yes` +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +CFLAGS="-g" +echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_prog_cc_g=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_stdc=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdarg.h> +#include <stdio.h> +#include <sys/types.h> +#include <sys/stat.h> +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std1 is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std1. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX 10.20 and later -Ae +# HP-UX older versions -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_stdc=$ac_arg +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext +done +rm -f conftest.$ac_ext conftest.$ac_objext +CC=$ac_save_CC + +fi + +case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; +esac + +# Some people use a C++ compiler to compile C. Since we use `exit', +# in C++ we need to declare it. In case someone uses the same compiler +# for both compiling C and C++ we need to have the C++ compiler decide +# the declaration of exit, since it's the most demanding environment. +cat >conftest.$ac_ext <<_ACEOF +#ifndef __cplusplus + choke me +#endif +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + for ac_declaration in \ + '' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +#include <stdlib.h> +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +continue +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +done +rm -f conftest* +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h +fi + +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + RANLIB=$ac_ct_RANLIB +else + RANLIB="$ac_cv_prog_RANLIB" +fi + + +MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing +for ac_prog in aclocal +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ACLOCAL+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ACLOCAL"; then + ac_cv_prog_ACLOCAL="$ACLOCAL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ACLOCAL="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ACLOCAL=$ac_cv_prog_ACLOCAL +if test -n "$ACLOCAL"; then + echo "$as_me:$LINENO: result: $ACLOCAL" >&5 +echo "${ECHO_T}$ACLOCAL" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$ACLOCAL" && break +done +test -n "$ACLOCAL" || ACLOCAL="$MISSING aclocal" + +for ac_prog in autoconf +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_AUTOCONF+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$AUTOCONF"; then + ac_cv_prog_AUTOCONF="$AUTOCONF" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AUTOCONF="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +AUTOCONF=$ac_cv_prog_AUTOCONF +if test -n "$AUTOCONF"; then + echo "$as_me:$LINENO: result: $AUTOCONF" >&5 +echo "${ECHO_T}$AUTOCONF" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$AUTOCONF" && break +done +test -n "$AUTOCONF" || AUTOCONF="$MISSING autoconf" + +for ac_prog in autoheader +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_AUTOHEADER+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$AUTOHEADER"; then + ac_cv_prog_AUTOHEADER="$AUTOHEADER" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AUTOHEADER="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +AUTOHEADER=$ac_cv_prog_AUTOHEADER +if test -n "$AUTOHEADER"; then + echo "$as_me:$LINENO: result: $AUTOHEADER" >&5 +echo "${ECHO_T}$AUTOHEADER" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$AUTOHEADER" && break +done +test -n "$AUTOHEADER" || AUTOHEADER="$MISSING autoheader" + + +# Figure out what compiler warnings we can enable. +# See config/warnings.m4 for details. + + +WARN_CFLAGS= +save_CFLAGS="$CFLAGS" +for option in -W -Wall -Wwrite-strings -Wstrict-prototypes \ + -Wmissing-prototypes -Wold-style-definition \ + -Wmissing-format-attribute -Wcast-qual; do + as_acx_Woption=`echo "acx_cv_prog_cc_warning_$option" | $as_tr_sh` + + echo "$as_me:$LINENO: checking whether $CC supports $option" >&5 +echo $ECHO_N "checking whether $CC supports $option... $ECHO_C" >&6 +if eval "test \"\${$as_acx_Woption+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + CFLAGS="$option" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_acx_Woption=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_acx_Woption=no" +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_acx_Woption'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_acx_Woption'}'`" >&6 + if test `eval echo '${'$as_acx_Woption'}'` = yes; then + WARN_CFLAGS="$WARN_CFLAGS${WARN_CFLAGS:+ }$option" +fi + + done +CFLAGS="$save_CFLAGS" + +WARN_PEDANTIC= +if test "$GCC" = yes; then + echo "$as_me:$LINENO: checking whether $CC supports -pedantic -Wno-long-long" >&5 +echo $ECHO_N "checking whether $CC supports -pedantic -Wno-long-long... $ECHO_C" >&6 +if test "${acx_cv_prog_cc_pedantic__Wno_long_long+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + save_CFLAGS="$CFLAGS" +CFLAGS="-pedantic -Wno-long-long" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + acx_cv_prog_cc_pedantic__Wno_long_long=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +acx_cv_prog_cc_pedantic__Wno_long_long=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +CFLAGS="$save_CFLAGS" +fi +echo "$as_me:$LINENO: result: $acx_cv_prog_cc_pedantic__Wno_long_long" >&5 +echo "${ECHO_T}$acx_cv_prog_cc_pedantic__Wno_long_long" >&6 +if test $acx_cv_prog_cc_pedantic__Wno_long_long = yes; then + WARN_PEDANTIC="$WARN_PEDANTIC${WARN_PEDANTIC:+ }-pedantic -Wno-long-long" +fi + + +fi + + + +# Only enable with --enable-werror-always until existing warnings are +# corrected. +WERROR= +# Check whether --enable-werror-always or --disable-werror-always was given. +if test "${enable_werror_always+set}" = set; then + enableval="$enable_werror_always" + +else + enable_werror_always=no +fi; +if test $enable_werror_always = yes; then + WERROR="$WERROR${WERROR:+ }-Werror" +fi + + + + +# Checks for header files. +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ac_nonexistent.h> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +echo "$as_me:$LINENO: result: $CPP" >&5 +echo "${ECHO_T}$CPP" >&6 +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ac_nonexistent.h> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +if test "${ac_cv_prog_egrep+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +echo "${ECHO_T}$ac_cv_prog_egrep" >&6 + EGREP=$ac_cv_prog_egrep + + +echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdlib.h> +#include <stdarg.h> +#include <string.h> +#include <float.h> + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_header_stdc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_header_stdc=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <string.h> + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdlib.h> + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ctype.h> +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + exit(2); + exit (0); +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6 +if test $ac_cv_header_stdc = yes; then + +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_Header=no" +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + + + + +for ac_header in ctype.h stddef.h string.h stdio.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ----------------------------------- ## +## Report this to gcc-bugs@gcc.gnu.org ## +## ----------------------------------- ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + +inttype_headers=`echo inttypes.h sys/inttypes.h | sed -e 's/,/ /g'` + +acx_cv_header_stdint=stddef.h +acx_cv_header_stdint_kind="(already complete)" +for i in stdint.h $inttype_headers; do + unset ac_cv_type_uintptr_t + unset ac_cv_type_uintmax_t + unset ac_cv_type_int_least32_t + unset ac_cv_type_int_fast32_t + unset ac_cv_type_uint64_t + echo $ECHO_N "looking for a compliant stdint.h in $i, $ECHO_C" >&6 + echo "$as_me:$LINENO: checking for uintmax_t" >&5 +echo $ECHO_N "checking for uintmax_t... $ECHO_C" >&6 +if test "${ac_cv_type_uintmax_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sys/types.h> +#include <$i> + +int +main () +{ +if ((uintmax_t *) 0) + return 0; +if (sizeof (uintmax_t)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_uintmax_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_uintmax_t=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_uintmax_t" >&5 +echo "${ECHO_T}$ac_cv_type_uintmax_t" >&6 +if test $ac_cv_type_uintmax_t = yes; then + acx_cv_header_stdint=$i +else + continue +fi + + echo "$as_me:$LINENO: checking for uintptr_t" >&5 +echo $ECHO_N "checking for uintptr_t... $ECHO_C" >&6 +if test "${ac_cv_type_uintptr_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sys/types.h> +#include <$i> + +int +main () +{ +if ((uintptr_t *) 0) + return 0; +if (sizeof (uintptr_t)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_uintptr_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_uintptr_t=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_uintptr_t" >&5 +echo "${ECHO_T}$ac_cv_type_uintptr_t" >&6 +if test $ac_cv_type_uintptr_t = yes; then + : +else + acx_cv_header_stdint_kind="(mostly complete)" +fi + + echo "$as_me:$LINENO: checking for int_least32_t" >&5 +echo $ECHO_N "checking for int_least32_t... $ECHO_C" >&6 +if test "${ac_cv_type_int_least32_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sys/types.h> +#include <$i> + +int +main () +{ +if ((int_least32_t *) 0) + return 0; +if (sizeof (int_least32_t)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_int_least32_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_int_least32_t=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_int_least32_t" >&5 +echo "${ECHO_T}$ac_cv_type_int_least32_t" >&6 +if test $ac_cv_type_int_least32_t = yes; then + : +else + acx_cv_header_stdint_kind="(mostly complete)" +fi + + echo "$as_me:$LINENO: checking for int_fast32_t" >&5 +echo $ECHO_N "checking for int_fast32_t... $ECHO_C" >&6 +if test "${ac_cv_type_int_fast32_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sys/types.h> +#include <$i> + +int +main () +{ +if ((int_fast32_t *) 0) + return 0; +if (sizeof (int_fast32_t)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_int_fast32_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_int_fast32_t=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_int_fast32_t" >&5 +echo "${ECHO_T}$ac_cv_type_int_fast32_t" >&6 +if test $ac_cv_type_int_fast32_t = yes; then + : +else + acx_cv_header_stdint_kind="(mostly complete)" +fi + + echo "$as_me:$LINENO: checking for uint64_t" >&5 +echo $ECHO_N "checking for uint64_t... $ECHO_C" >&6 +if test "${ac_cv_type_uint64_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sys/types.h> +#include <$i> + +int +main () +{ +if ((uint64_t *) 0) + return 0; +if (sizeof (uint64_t)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_uint64_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_uint64_t=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_uint64_t" >&5 +echo "${ECHO_T}$ac_cv_type_uint64_t" >&6 +if test $ac_cv_type_uint64_t = yes; then + : +else + acx_cv_header_stdint_kind="(lacks uint64_t)" +fi + + break +done +if test "$acx_cv_header_stdint" = stddef.h; then + acx_cv_header_stdint_kind="(lacks uintmax_t)" + for i in stdint.h $inttype_headers; do + unset ac_cv_type_uintptr_t + unset ac_cv_type_uint32_t + unset ac_cv_type_uint64_t + echo $ECHO_N "looking for an incomplete stdint.h in $i, $ECHO_C" >&6 + echo "$as_me:$LINENO: checking for uint32_t" >&5 +echo $ECHO_N "checking for uint32_t... $ECHO_C" >&6 +if test "${ac_cv_type_uint32_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sys/types.h> +#include <$i> + +int +main () +{ +if ((uint32_t *) 0) + return 0; +if (sizeof (uint32_t)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_uint32_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_uint32_t=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_uint32_t" >&5 +echo "${ECHO_T}$ac_cv_type_uint32_t" >&6 +if test $ac_cv_type_uint32_t = yes; then + acx_cv_header_stdint=$i +else + continue +fi + + echo "$as_me:$LINENO: checking for uint64_t" >&5 +echo $ECHO_N "checking for uint64_t... $ECHO_C" >&6 +if test "${ac_cv_type_uint64_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sys/types.h> +#include <$i> + +int +main () +{ +if ((uint64_t *) 0) + return 0; +if (sizeof (uint64_t)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_uint64_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_uint64_t=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_uint64_t" >&5 +echo "${ECHO_T}$ac_cv_type_uint64_t" >&6 + + echo "$as_me:$LINENO: checking for uintptr_t" >&5 +echo $ECHO_N "checking for uintptr_t... $ECHO_C" >&6 +if test "${ac_cv_type_uintptr_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sys/types.h> +#include <$i> + +int +main () +{ +if ((uintptr_t *) 0) + return 0; +if (sizeof (uintptr_t)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_uintptr_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_uintptr_t=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_uintptr_t" >&5 +echo "${ECHO_T}$ac_cv_type_uintptr_t" >&6 + + break + done +fi +if test "$acx_cv_header_stdint" = stddef.h; then + acx_cv_header_stdint_kind="(u_intXX_t style)" + for i in sys/types.h $inttype_headers; do + unset ac_cv_type_u_int32_t + unset ac_cv_type_u_int64_t + echo $ECHO_N "looking for u_intXX_t types in $i, $ECHO_C" >&6 + echo "$as_me:$LINENO: checking for u_int32_t" >&5 +echo $ECHO_N "checking for u_int32_t... $ECHO_C" >&6 +if test "${ac_cv_type_u_int32_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sys/types.h> +#include <$i> + +int +main () +{ +if ((u_int32_t *) 0) + return 0; +if (sizeof (u_int32_t)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_u_int32_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_u_int32_t=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_u_int32_t" >&5 +echo "${ECHO_T}$ac_cv_type_u_int32_t" >&6 +if test $ac_cv_type_u_int32_t = yes; then + acx_cv_header_stdint=$i +else + continue +fi + + echo "$as_me:$LINENO: checking for u_int64_t" >&5 +echo $ECHO_N "checking for u_int64_t... $ECHO_C" >&6 +if test "${ac_cv_type_u_int64_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sys/types.h> +#include <$i> + +int +main () +{ +if ((u_int64_t *) 0) + return 0; +if (sizeof (u_int64_t)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_u_int64_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_u_int64_t=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_u_int64_t" >&5 +echo "${ECHO_T}$ac_cv_type_u_int64_t" >&6 + + break + done +fi +if test "$acx_cv_header_stdint" = stddef.h; then + acx_cv_header_stdint_kind="(using manual detection)" +fi + +test -z "$ac_cv_type_uintptr_t" && ac_cv_type_uintptr_t=no +test -z "$ac_cv_type_uint64_t" && ac_cv_type_uint64_t=no +test -z "$ac_cv_type_u_int64_t" && ac_cv_type_u_int64_t=no +test -z "$ac_cv_type_int_least32_t" && ac_cv_type_int_least32_t=no +test -z "$ac_cv_type_int_fast32_t" && ac_cv_type_int_fast32_t=no + +# ----------------- Summarize what we found so far + +echo "$as_me:$LINENO: checking what to include in gstdint.h" >&5 +echo $ECHO_N "checking what to include in gstdint.h... $ECHO_C" >&6 + +case `$as_basename gstdint.h || +$as_expr X/gstdint.h : '.*/\([^/][^/]*\)/*$' \| \ + Xgstdint.h : 'X\(//\)$' \| \ + Xgstdint.h : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/gstdint.h | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` in + stdint.h) { echo "$as_me:$LINENO: WARNING: are you sure you want it there?" >&5 +echo "$as_me: WARNING: are you sure you want it there?" >&2;} ;; + inttypes.h) { echo "$as_me:$LINENO: WARNING: are you sure you want it there?" >&5 +echo "$as_me: WARNING: are you sure you want it there?" >&2;} ;; + *) ;; +esac + +echo "$as_me:$LINENO: result: $acx_cv_header_stdint $acx_cv_header_stdint_kind" >&5 +echo "${ECHO_T}$acx_cv_header_stdint $acx_cv_header_stdint_kind" >&6 + +# ----------------- done included file, check C basic types -------- + +# Lacking an uintptr_t? Test size of void * +case "$acx_cv_header_stdint:$ac_cv_type_uintptr_t" in + stddef.h:* | *:no) echo "$as_me:$LINENO: checking for void *" >&5 +echo $ECHO_N "checking for void *... $ECHO_C" >&6 +if test "${ac_cv_type_void_p+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if ((void * *) 0) + return 0; +if (sizeof (void *)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_void_p=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_void_p=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_void_p" >&5 +echo "${ECHO_T}$ac_cv_type_void_p" >&6 + +echo "$as_me:$LINENO: checking size of void *" >&5 +echo $ECHO_N "checking size of void *... $ECHO_C" >&6 +if test "${ac_cv_sizeof_void_p+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$ac_cv_type_void_p" = yes; then + # The cast to unsigned long works around a bug in the HP C Compiler + # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects + # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. + # This bug is HP SR number 8606223364. + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (void *))) >= 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_lo=0 ac_mid=0 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (void *))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=$ac_mid; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo=`expr $ac_mid + 1` + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid + 1` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (void *))) < 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=-1 ac_mid=-1 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (void *))) >= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_lo=$ac_mid; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_hi=`expr '(' $ac_mid ')' - 1` + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo= ac_hi= +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +# Binary search between lo and hi bounds. +while test "x$ac_lo" != "x$ac_hi"; do + ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (void *))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=$ac_mid +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo=`expr '(' $ac_mid ')' + 1` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +done +case $ac_lo in +?*) ac_cv_sizeof_void_p=$ac_lo;; +'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (void *), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (void *), 77 +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } ;; +esac +else + if test "$cross_compiling" = yes; then + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run test program while cross compiling +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +long longval () { return (long) (sizeof (void *)); } +unsigned long ulongval () { return (long) (sizeof (void *)); } +#include <stdio.h> +#include <stdlib.h> +int +main () +{ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) + exit (1); + if (((long) (sizeof (void *))) < 0) + { + long i = longval (); + if (i != ((long) (sizeof (void *)))) + exit (1); + fprintf (f, "%ld\n", i); + } + else + { + unsigned long i = ulongval (); + if (i != ((long) (sizeof (void *)))) + exit (1); + fprintf (f, "%lu\n", i); + } + exit (ferror (f) || fclose (f) != 0); + + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_sizeof_void_p=`cat conftest.val` +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +{ { echo "$as_me:$LINENO: error: cannot compute sizeof (void *), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (void *), 77 +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +rm -f conftest.val +else + ac_cv_sizeof_void_p=0 +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_sizeof_void_p" >&5 +echo "${ECHO_T}$ac_cv_sizeof_void_p" >&6 +cat >>confdefs.h <<_ACEOF +#define SIZEOF_VOID_P $ac_cv_sizeof_void_p +_ACEOF + + ;; +esac + +# Lacking an uint64_t? Test size of long +case "$acx_cv_header_stdint:$ac_cv_type_uint64_t:$ac_cv_type_u_int64_t" in + stddef.h:*:* | *:no:no) echo "$as_me:$LINENO: checking for long" >&5 +echo $ECHO_N "checking for long... $ECHO_C" >&6 +if test "${ac_cv_type_long+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if ((long *) 0) + return 0; +if (sizeof (long)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_long=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_long=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_long" >&5 +echo "${ECHO_T}$ac_cv_type_long" >&6 + +echo "$as_me:$LINENO: checking size of long" >&5 +echo $ECHO_N "checking size of long... $ECHO_C" >&6 +if test "${ac_cv_sizeof_long+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$ac_cv_type_long" = yes; then + # The cast to unsigned long works around a bug in the HP C Compiler + # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects + # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. + # This bug is HP SR number 8606223364. + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (long))) >= 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_lo=0 ac_mid=0 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=$ac_mid; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo=`expr $ac_mid + 1` + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid + 1` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (long))) < 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=-1 ac_mid=-1 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (long))) >= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_lo=$ac_mid; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_hi=`expr '(' $ac_mid ')' - 1` + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo= ac_hi= +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +# Binary search between lo and hi bounds. +while test "x$ac_lo" != "x$ac_hi"; do + ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=$ac_mid +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo=`expr '(' $ac_mid ')' + 1` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +done +case $ac_lo in +?*) ac_cv_sizeof_long=$ac_lo;; +'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (long), 77 +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } ;; +esac +else + if test "$cross_compiling" = yes; then + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run test program while cross compiling +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +long longval () { return (long) (sizeof (long)); } +unsigned long ulongval () { return (long) (sizeof (long)); } +#include <stdio.h> +#include <stdlib.h> +int +main () +{ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) + exit (1); + if (((long) (sizeof (long))) < 0) + { + long i = longval (); + if (i != ((long) (sizeof (long)))) + exit (1); + fprintf (f, "%ld\n", i); + } + else + { + unsigned long i = ulongval (); + if (i != ((long) (sizeof (long)))) + exit (1); + fprintf (f, "%lu\n", i); + } + exit (ferror (f) || fclose (f) != 0); + + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_sizeof_long=`cat conftest.val` +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (long), 77 +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +rm -f conftest.val +else + ac_cv_sizeof_long=0 +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_sizeof_long" >&5 +echo "${ECHO_T}$ac_cv_sizeof_long" >&6 +cat >>confdefs.h <<_ACEOF +#define SIZEOF_LONG $ac_cv_sizeof_long +_ACEOF + + ;; +esac + +if test $acx_cv_header_stdint = stddef.h; then + # Lacking a good header? Test size of everything and deduce all types. + echo "$as_me:$LINENO: checking for int" >&5 +echo $ECHO_N "checking for int... $ECHO_C" >&6 +if test "${ac_cv_type_int+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if ((int *) 0) + return 0; +if (sizeof (int)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_int=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_int=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_int" >&5 +echo "${ECHO_T}$ac_cv_type_int" >&6 + +echo "$as_me:$LINENO: checking size of int" >&5 +echo $ECHO_N "checking size of int... $ECHO_C" >&6 +if test "${ac_cv_sizeof_int+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$ac_cv_type_int" = yes; then + # The cast to unsigned long works around a bug in the HP C Compiler + # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects + # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. + # This bug is HP SR number 8606223364. + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (int))) >= 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_lo=0 ac_mid=0 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=$ac_mid; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo=`expr $ac_mid + 1` + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid + 1` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (int))) < 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=-1 ac_mid=-1 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (int))) >= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_lo=$ac_mid; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_hi=`expr '(' $ac_mid ')' - 1` + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo= ac_hi= +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +# Binary search between lo and hi bounds. +while test "x$ac_lo" != "x$ac_hi"; do + ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=$ac_mid +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo=`expr '(' $ac_mid ')' + 1` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +done +case $ac_lo in +?*) ac_cv_sizeof_int=$ac_lo;; +'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (int), 77 +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } ;; +esac +else + if test "$cross_compiling" = yes; then + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run test program while cross compiling +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +long longval () { return (long) (sizeof (int)); } +unsigned long ulongval () { return (long) (sizeof (int)); } +#include <stdio.h> +#include <stdlib.h> +int +main () +{ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) + exit (1); + if (((long) (sizeof (int))) < 0) + { + long i = longval (); + if (i != ((long) (sizeof (int)))) + exit (1); + fprintf (f, "%ld\n", i); + } + else + { + unsigned long i = ulongval (); + if (i != ((long) (sizeof (int)))) + exit (1); + fprintf (f, "%lu\n", i); + } + exit (ferror (f) || fclose (f) != 0); + + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_sizeof_int=`cat conftest.val` +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +{ { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (int), 77 +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +rm -f conftest.val +else + ac_cv_sizeof_int=0 +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_sizeof_int" >&5 +echo "${ECHO_T}$ac_cv_sizeof_int" >&6 +cat >>confdefs.h <<_ACEOF +#define SIZEOF_INT $ac_cv_sizeof_int +_ACEOF + + + echo "$as_me:$LINENO: checking for short" >&5 +echo $ECHO_N "checking for short... $ECHO_C" >&6 +if test "${ac_cv_type_short+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if ((short *) 0) + return 0; +if (sizeof (short)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_short=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_short=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_short" >&5 +echo "${ECHO_T}$ac_cv_type_short" >&6 + +echo "$as_me:$LINENO: checking size of short" >&5 +echo $ECHO_N "checking size of short... $ECHO_C" >&6 +if test "${ac_cv_sizeof_short+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$ac_cv_type_short" = yes; then + # The cast to unsigned long works around a bug in the HP C Compiler + # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects + # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. + # This bug is HP SR number 8606223364. + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (short))) >= 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_lo=0 ac_mid=0 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (short))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=$ac_mid; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo=`expr $ac_mid + 1` + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid + 1` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (short))) < 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=-1 ac_mid=-1 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (short))) >= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_lo=$ac_mid; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_hi=`expr '(' $ac_mid ')' - 1` + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo= ac_hi= +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +# Binary search between lo and hi bounds. +while test "x$ac_lo" != "x$ac_hi"; do + ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (short))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=$ac_mid +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo=`expr '(' $ac_mid ')' + 1` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +done +case $ac_lo in +?*) ac_cv_sizeof_short=$ac_lo;; +'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (short), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (short), 77 +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } ;; +esac +else + if test "$cross_compiling" = yes; then + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run test program while cross compiling +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +long longval () { return (long) (sizeof (short)); } +unsigned long ulongval () { return (long) (sizeof (short)); } +#include <stdio.h> +#include <stdlib.h> +int +main () +{ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) + exit (1); + if (((long) (sizeof (short))) < 0) + { + long i = longval (); + if (i != ((long) (sizeof (short)))) + exit (1); + fprintf (f, "%ld\n", i); + } + else + { + unsigned long i = ulongval (); + if (i != ((long) (sizeof (short)))) + exit (1); + fprintf (f, "%lu\n", i); + } + exit (ferror (f) || fclose (f) != 0); + + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_sizeof_short=`cat conftest.val` +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +{ { echo "$as_me:$LINENO: error: cannot compute sizeof (short), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (short), 77 +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +rm -f conftest.val +else + ac_cv_sizeof_short=0 +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_sizeof_short" >&5 +echo "${ECHO_T}$ac_cv_sizeof_short" >&6 +cat >>confdefs.h <<_ACEOF +#define SIZEOF_SHORT $ac_cv_sizeof_short +_ACEOF + + + echo "$as_me:$LINENO: checking for char" >&5 +echo $ECHO_N "checking for char... $ECHO_C" >&6 +if test "${ac_cv_type_char+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if ((char *) 0) + return 0; +if (sizeof (char)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_char=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_char=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_char" >&5 +echo "${ECHO_T}$ac_cv_type_char" >&6 + +echo "$as_me:$LINENO: checking size of char" >&5 +echo $ECHO_N "checking size of char... $ECHO_C" >&6 +if test "${ac_cv_sizeof_char+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$ac_cv_type_char" = yes; then + # The cast to unsigned long works around a bug in the HP C Compiler + # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects + # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. + # This bug is HP SR number 8606223364. + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (char))) >= 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_lo=0 ac_mid=0 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (char))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=$ac_mid; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo=`expr $ac_mid + 1` + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid + 1` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (char))) < 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=-1 ac_mid=-1 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (char))) >= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_lo=$ac_mid; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_hi=`expr '(' $ac_mid ')' - 1` + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo= ac_hi= +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +# Binary search between lo and hi bounds. +while test "x$ac_lo" != "x$ac_hi"; do + ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (char))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=$ac_mid +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo=`expr '(' $ac_mid ')' + 1` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +done +case $ac_lo in +?*) ac_cv_sizeof_char=$ac_lo;; +'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (char), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (char), 77 +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } ;; +esac +else + if test "$cross_compiling" = yes; then + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run test program while cross compiling +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +long longval () { return (long) (sizeof (char)); } +unsigned long ulongval () { return (long) (sizeof (char)); } +#include <stdio.h> +#include <stdlib.h> +int +main () +{ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) + exit (1); + if (((long) (sizeof (char))) < 0) + { + long i = longval (); + if (i != ((long) (sizeof (char)))) + exit (1); + fprintf (f, "%ld\n", i); + } + else + { + unsigned long i = ulongval (); + if (i != ((long) (sizeof (char)))) + exit (1); + fprintf (f, "%lu\n", i); + } + exit (ferror (f) || fclose (f) != 0); + + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_sizeof_char=`cat conftest.val` +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +{ { echo "$as_me:$LINENO: error: cannot compute sizeof (char), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (char), 77 +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +rm -f conftest.val +else + ac_cv_sizeof_char=0 +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_sizeof_char" >&5 +echo "${ECHO_T}$ac_cv_sizeof_char" >&6 +cat >>confdefs.h <<_ACEOF +#define SIZEOF_CHAR $ac_cv_sizeof_char +_ACEOF + + + + echo "$as_me:$LINENO: checking for type equivalent to int8_t" >&5 +echo $ECHO_N "checking for type equivalent to int8_t... $ECHO_C" >&6 + case "$ac_cv_sizeof_char" in + 1) acx_cv_type_int8_t=char ;; + *) { { echo "$as_me:$LINENO: error: no 8-bit type" >&5 +echo "$as_me: error: no 8-bit type" >&2;} + { (exit please report a bug); exit please report a bug; }; } + esac + echo "$as_me:$LINENO: result: $acx_cv_type_int8_t" >&5 +echo "${ECHO_T}$acx_cv_type_int8_t" >&6 + + echo "$as_me:$LINENO: checking for type equivalent to int16_t" >&5 +echo $ECHO_N "checking for type equivalent to int16_t... $ECHO_C" >&6 + case "$ac_cv_sizeof_int:$ac_cv_sizeof_short" in + 2:*) acx_cv_type_int16_t=int ;; + *:2) acx_cv_type_int16_t=short ;; + *) { { echo "$as_me:$LINENO: error: no 16-bit type" >&5 +echo "$as_me: error: no 16-bit type" >&2;} + { (exit please report a bug); exit please report a bug; }; } + esac + echo "$as_me:$LINENO: result: $acx_cv_type_int16_t" >&5 +echo "${ECHO_T}$acx_cv_type_int16_t" >&6 + + echo "$as_me:$LINENO: checking for type equivalent to int32_t" >&5 +echo $ECHO_N "checking for type equivalent to int32_t... $ECHO_C" >&6 + case "$ac_cv_sizeof_int:$ac_cv_sizeof_long" in + 4:*) acx_cv_type_int32_t=int ;; + *:4) acx_cv_type_int32_t=long ;; + *) { { echo "$as_me:$LINENO: error: no 32-bit type" >&5 +echo "$as_me: error: no 32-bit type" >&2;} + { (exit please report a bug); exit please report a bug; }; } + esac + echo "$as_me:$LINENO: result: $acx_cv_type_int32_t" >&5 +echo "${ECHO_T}$acx_cv_type_int32_t" >&6 +fi + +# These tests are here to make the output prettier + +if test "$ac_cv_type_uint64_t" != yes && test "$ac_cv_type_u_int64_t" != yes; then + case "$ac_cv_sizeof_long" in + 8) acx_cv_type_int64_t=long ;; + esac + echo "$as_me:$LINENO: checking for type equivalent to int64_t" >&5 +echo $ECHO_N "checking for type equivalent to int64_t... $ECHO_C" >&6 + echo "$as_me:$LINENO: result: ${acx_cv_type_int64_t-'using preprocessor symbols'}" >&5 +echo "${ECHO_T}${acx_cv_type_int64_t-'using preprocessor symbols'}" >&6 +fi + +# Now we can use the above types + +if test "$ac_cv_type_uintptr_t" != yes; then + echo "$as_me:$LINENO: checking for type equivalent to intptr_t" >&5 +echo $ECHO_N "checking for type equivalent to intptr_t... $ECHO_C" >&6 + case $ac_cv_sizeof_void_p in + 2) acx_cv_type_intptr_t=int16_t ;; + 4) acx_cv_type_intptr_t=int32_t ;; + 8) acx_cv_type_intptr_t=int64_t ;; + *) { { echo "$as_me:$LINENO: error: no equivalent for intptr_t" >&5 +echo "$as_me: error: no equivalent for intptr_t" >&2;} + { (exit please report a bug); exit please report a bug; }; } + esac + echo "$as_me:$LINENO: result: $acx_cv_type_intptr_t" >&5 +echo "${ECHO_T}$acx_cv_type_intptr_t" >&6 +fi + +# ----------------- done all checks, emit header ------------- + ac_config_commands="$ac_config_commands gstdint.h" + + + + +# Checks for typedefs, structures, and compiler characteristics. +echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 +echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6 +if test "${ac_cv_c_const+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +/* FIXME: Include the comments suggested by Paul. */ +#ifndef __cplusplus + /* Ultrix mips cc rejects this. */ + typedef int charset[2]; + const charset x; + /* SunOS 4.1.1 cc rejects this. */ + char const *const *ccp; + char **p; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; + /* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; + ccp = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ + ++ccp; + p = (char**) ccp; + ccp = (char const *const *) p; + { /* SCO 3.2v4 cc rejects this. */ + char *t; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; + } + { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; + } + { /* AIX XL C 1.02.0.0 rejects this saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; }; + struct s *b; b->j = 5; + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; + } +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_c_const=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_c_const=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 +echo "${ECHO_T}$ac_cv_c_const" >&6 +if test $ac_cv_c_const = no; then + +cat >>confdefs.h <<\_ACEOF +#define const +_ACEOF + +fi + +echo "$as_me:$LINENO: checking for off_t" >&5 +echo $ECHO_N "checking for off_t... $ECHO_C" >&6 +if test "${ac_cv_type_off_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if ((off_t *) 0) + return 0; +if (sizeof (off_t)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_off_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_off_t=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_off_t" >&5 +echo "${ECHO_T}$ac_cv_type_off_t" >&6 +if test $ac_cv_type_off_t = yes; then + : +else + +cat >>confdefs.h <<_ACEOF +#define off_t long +_ACEOF + +fi + +echo "$as_me:$LINENO: checking for int" >&5 +echo $ECHO_N "checking for int... $ECHO_C" >&6 +if test "${ac_cv_type_int+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if ((int *) 0) + return 0; +if (sizeof (int)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_int=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_int=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_int" >&5 +echo "${ECHO_T}$ac_cv_type_int" >&6 + +echo "$as_me:$LINENO: checking size of int" >&5 +echo $ECHO_N "checking size of int... $ECHO_C" >&6 +if test "${ac_cv_sizeof_int+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$ac_cv_type_int" = yes; then + # The cast to unsigned long works around a bug in the HP C Compiler + # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects + # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. + # This bug is HP SR number 8606223364. + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (int))) >= 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_lo=0 ac_mid=0 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=$ac_mid; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo=`expr $ac_mid + 1` + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid + 1` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (int))) < 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=-1 ac_mid=-1 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (int))) >= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_lo=$ac_mid; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_hi=`expr '(' $ac_mid ')' - 1` + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo= ac_hi= +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +# Binary search between lo and hi bounds. +while test "x$ac_lo" != "x$ac_hi"; do + ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=$ac_mid +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo=`expr '(' $ac_mid ')' + 1` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +done +case $ac_lo in +?*) ac_cv_sizeof_int=$ac_lo;; +'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (int), 77 +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } ;; +esac +else + if test "$cross_compiling" = yes; then + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run test program while cross compiling +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +long longval () { return (long) (sizeof (int)); } +unsigned long ulongval () { return (long) (sizeof (int)); } +#include <stdio.h> +#include <stdlib.h> +int +main () +{ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) + exit (1); + if (((long) (sizeof (int))) < 0) + { + long i = longval (); + if (i != ((long) (sizeof (int)))) + exit (1); + fprintf (f, "%ld\n", i); + } + else + { + unsigned long i = ulongval (); + if (i != ((long) (sizeof (int)))) + exit (1); + fprintf (f, "%lu\n", i); + } + exit (ferror (f) || fclose (f) != 0); + + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_sizeof_int=`cat conftest.val` +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +{ { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (int), 77 +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +rm -f conftest.val +else + ac_cv_sizeof_int=0 +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_sizeof_int" >&5 +echo "${ECHO_T}$ac_cv_sizeof_int" >&6 +cat >>confdefs.h <<_ACEOF +#define SIZEOF_INT $ac_cv_sizeof_int +_ACEOF + + +echo "$as_me:$LINENO: checking for long" >&5 +echo $ECHO_N "checking for long... $ECHO_C" >&6 +if test "${ac_cv_type_long+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if ((long *) 0) + return 0; +if (sizeof (long)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_long=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_long=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_long" >&5 +echo "${ECHO_T}$ac_cv_type_long" >&6 + +echo "$as_me:$LINENO: checking size of long" >&5 +echo $ECHO_N "checking size of long... $ECHO_C" >&6 +if test "${ac_cv_sizeof_long+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$ac_cv_type_long" = yes; then + # The cast to unsigned long works around a bug in the HP C Compiler + # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects + # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. + # This bug is HP SR number 8606223364. + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (long))) >= 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_lo=0 ac_mid=0 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=$ac_mid; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo=`expr $ac_mid + 1` + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid + 1` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (long))) < 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=-1 ac_mid=-1 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (long))) >= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_lo=$ac_mid; break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_hi=`expr '(' $ac_mid ')' - 1` + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo= ac_hi= +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +# Binary search between lo and hi bounds. +while test "x$ac_lo" != "x$ac_hi"; do + ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_hi=$ac_mid +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_lo=`expr '(' $ac_mid ')' + 1` +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +done +case $ac_lo in +?*) ac_cv_sizeof_long=$ac_lo;; +'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (long), 77 +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } ;; +esac +else + if test "$cross_compiling" = yes; then + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run test program while cross compiling +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +long longval () { return (long) (sizeof (long)); } +unsigned long ulongval () { return (long) (sizeof (long)); } +#include <stdio.h> +#include <stdlib.h> +int +main () +{ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) + exit (1); + if (((long) (sizeof (long))) < 0) + { + long i = longval (); + if (i != ((long) (sizeof (long)))) + exit (1); + fprintf (f, "%ld\n", i); + } + else + { + unsigned long i = ulongval (); + if (i != ((long) (sizeof (long)))) + exit (1); + fprintf (f, "%lu\n", i); + } + exit (ferror (f) || fclose (f) != 0); + + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_sizeof_long=`cat conftest.val` +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77 +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute sizeof (long), 77 +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +rm -f conftest.val +else + ac_cv_sizeof_long=0 +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_sizeof_long" >&5 +echo "${ECHO_T}$ac_cv_sizeof_long" >&6 +cat >>confdefs.h <<_ACEOF +#define SIZEOF_LONG $ac_cv_sizeof_long +_ACEOF + + + +# Checks for library functions. +echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdlib.h> +#include <stdarg.h> +#include <string.h> +#include <float.h> + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_header_stdc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_header_stdc=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <string.h> + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdlib.h> + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ctype.h> +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + exit(2); + exit (0); +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6 +if test $ac_cv_header_stdc = yes; then + +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF + +fi + + +# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval="$enable_maintainer_mode" + +else + enable_maintainer_mode=no +fi; + +if test "x$enable_maintainer_mode" = xno; then + MAINT='#' +else + MAINT= +fi + + +ac_aux_dir= +for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f $ac_dir/shtool; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 +echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} + { (exit 1); exit 1; }; } +fi +ac_config_guess="$SHELL $ac_aux_dir/config.guess" +ac_config_sub="$SHELL $ac_aux_dir/config.sub" +ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + +# Make sure we can run config.sub. +$ac_config_sub sun4 >/dev/null 2>&1 || + { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 +echo "$as_me: error: cannot run $ac_config_sub" >&2;} + { (exit 1); exit 1; }; } + +echo "$as_me:$LINENO: checking build system type" >&5 +echo $ECHO_N "checking build system type... $ECHO_C" >&6 +if test "${ac_cv_build+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_build_alias=$build_alias +test -z "$ac_cv_build_alias" && + ac_cv_build_alias=`$ac_config_guess` +test -z "$ac_cv_build_alias" && + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +echo "${ECHO_T}$ac_cv_build" >&6 +build=$ac_cv_build +build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + +echo "$as_me:$LINENO: checking host system type" >&5 +echo $ECHO_N "checking host system type... $ECHO_C" >&6 +if test "${ac_cv_host+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_host_alias=$host_alias +test -z "$ac_cv_host_alias" && + ac_cv_host_alias=$ac_cv_build_alias +ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +echo "${ECHO_T}$ac_cv_host" >&6 +host=$ac_cv_host +host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + +echo "$as_me:$LINENO: checking target system type" >&5 +echo $ECHO_N "checking target system type... $ECHO_C" >&6 +if test "${ac_cv_target+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_target_alias=$target_alias +test "x$ac_cv_target_alias" = "x" && + ac_cv_target_alias=$ac_cv_host_alias +ac_cv_target=`$ac_config_sub $ac_cv_target_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_target" >&5 +echo "${ECHO_T}$ac_cv_target" >&6 +target=$ac_cv_target +target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +test -n "$target_alias" && + test "$program_prefix$program_suffix$program_transform_name" = \ + NONENONEs,x,x, && + program_prefix=${target_alias}- + +# Default decimal format +# If you change the defaults here, be sure to change them in the GCC directory also +echo "$as_me:$LINENO: checking for decimal floating point" >&5 +echo $ECHO_N "checking for decimal floating point... $ECHO_C" >&6 +# Check whether --enable-decimal-float or --disable-decimal-float was given. +if test "${enable_decimal_float+set}" = set; then + enableval="$enable_decimal_float" + + case $enable_decimal_float in + yes | no | bid | dpd) ;; + *) { { echo "$as_me:$LINENO: error: '$enable_decimal_float' is an invalid value for --enable-decimal-float. +Valid choices are 'yes', 'bid', 'dpd', and 'no'." >&5 +echo "$as_me: error: '$enable_decimal_float' is an invalid value for --enable-decimal-float. +Valid choices are 'yes', 'bid', 'dpd', and 'no'." >&2;} + { (exit 1); exit 1; }; } ;; + esac + +else + + case $target in + powerpc*-*-linux* | i?86*-*-linux* | x86_64*-*-linux*) + enable_decimal_float=yes + ;; + *) + enable_decimal_float=no + ;; + esac + +fi; + +# x86's use BID format instead of DPD +# In theory --enable-decimal-float=no should not compile anything +# For the sake of simplicity, just use the default format in this directory +if test x$enable_decimal_float = xyes -o x$enable_decimal_float = xno; then + case $target in + i?86*-*-linux* | x86_64*-*-linux*) + enable_decimal_float=bid + ;; + *) + enable_decimal_float=dpd + ;; + esac +fi + +echo "$as_me:$LINENO: result: $enable_decimal_float" >&5 +echo "${ECHO_T}$enable_decimal_float" >&6 + + +echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 +echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6 +if test "${ac_cv_c_bigendian+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # See if sys/param.h defines the BYTE_ORDER macro. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sys/types.h> +#include <sys/param.h> + +int +main () +{ +#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN + bogus endian macros +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + # It does; now see whether it defined to BIG_ENDIAN or not. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sys/types.h> +#include <sys/param.h> + +int +main () +{ +#if BYTE_ORDER != BIG_ENDIAN + not big endian +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_c_bigendian=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_c_bigendian=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +# It does not; compile a test program. +if test "$cross_compiling" = yes; then + # try to guess the endianness by grepping values into an object file + ac_cv_c_bigendian=unknown + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; +short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; +void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; } +short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; +short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; +void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; } +int +main () +{ + _ascii (); _ebcdic (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then + ac_cv_c_bigendian=yes +fi +if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then + if test "$ac_cv_c_bigendian" = unknown; then + ac_cv_c_bigendian=no + else + # finding both strings is unlikely to happen, but who knows? + ac_cv_c_bigendian=unknown + fi +fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +int +main () +{ + /* Are we little or big endian? From Harbison&Steele. */ + union + { + long l; + char c[sizeof (long)]; + } u; + u.l = 1; + exit (u.c[sizeof (long) - 1] == 1); +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_c_bigendian=no +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_c_bigendian=yes +fi +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5 +echo "${ECHO_T}$ac_cv_c_bigendian" >&6 +case $ac_cv_c_bigendian in + yes) + +cat >>confdefs.h <<\_ACEOF +#define WORDS_BIGENDIAN 1 +_ACEOF + ;; + no) + ;; + *) + { { echo "$as_me:$LINENO: error: unknown endianness +presetting ac_cv_c_bigendian=no (or yes) will help" >&5 +echo "$as_me: error: unknown endianness +presetting ac_cv_c_bigendian=no (or yes) will help" >&2;} + { (exit 1); exit 1; }; } ;; +esac + + +# Output. + + ac_config_headers="$ac_config_headers config.h:config.in" + + ac_config_files="$ac_config_files Makefile" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +{ + (set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} | + sed ' + t clear + : clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + : end' >>confcache +if diff $cache_file confcache >/dev/null 2>&1; then :; else + if test -w $cache_file; then + test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + cat confcache >$cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/; +s/:*\${srcdir}:*/:/; +s/:*@srcdir@:*/:/; +s/^\([^=]*=[ ]*\):*/\1/; +s/:*$//; +s/^[^=]*=[ ]*$//; +}' +fi + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_i=`echo "$ac_i" | + sed 's/\$U\././;s/\.o$//;s/\.obj$//'` + # 2. Add them. + ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + +: ${CONFIG_STATUS=./config.status} +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + +exec 6>&1 + +# Open the log real soon, to keep \$[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. Logging --version etc. is OK. +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX +} >&5 +cat >&5 <<_CSEOF + +This file was extended by libdecnumber $as_me , which was +generated by GNU Autoconf 2.59. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +_CSEOF +echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +echo >&5 +_ACEOF + +# Files that config.status was made for. +if test -n "$ac_config_files"; then + echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_headers"; then + echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_links"; then + echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_commands"; then + echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +fi + +cat >>$CONFIG_STATUS <<\_ACEOF + +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to <bug-autoconf@gnu.org>." +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +ac_cs_version="\\ +libdecnumber config.status +configured by $0, generated by GNU Autoconf 2.59, + with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" + +Copyright (C) 2003 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." +srcdir=$srcdir +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If no file are specified by the user, then we need to provide default +# value. By we need to know if files were specified by the user. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "x$1" : 'x\([^=]*\)='` + ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + ac_shift=: + ;; + -*) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + *) # This is not an option, so the user has probably given explicit + # arguments. + ac_option=$1 + ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --vers* | -V ) + echo "$ac_cs_version"; exit 0 ;; + --he | --h) + # Conflict between --help and --header + { { echo "$as_me:$LINENO: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + echo "$ac_cs_usage"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +# +# INIT-COMMANDS section. +# + + +GCC="$GCC" +CC="$CC" +acx_cv_header_stdint="$acx_cv_header_stdint" +acx_cv_type_int8_t="$acx_cv_type_int8_t" +acx_cv_type_int16_t="$acx_cv_type_int16_t" +acx_cv_type_int32_t="$acx_cv_type_int32_t" +acx_cv_type_int64_t="$acx_cv_type_int64_t" +acx_cv_type_intptr_t="$acx_cv_type_intptr_t" +ac_cv_type_uintmax_t="$ac_cv_type_uintmax_t" +ac_cv_type_uintptr_t="$ac_cv_type_uintptr_t" +ac_cv_type_uint64_t="$ac_cv_type_uint64_t" +ac_cv_type_u_int64_t="$ac_cv_type_u_int64_t" +ac_cv_type_u_int32_t="$ac_cv_type_u_int32_t" +ac_cv_type_int_least32_t="$ac_cv_type_int_least32_t" +ac_cv_type_int_fast32_t="$ac_cv_type_int_fast32_t" +ac_cv_sizeof_void_p="$ac_cv_sizeof_void_p" + + +_ACEOF + + + +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_config_target in $ac_config_targets +do + case "$ac_config_target" in + # Handling of arguments. + "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "gstdint.h" ) CONFIG_COMMANDS="$CONFIG_COMMANDS gstdint.h" ;; + "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;; + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason to put it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Create a temporary directory, and hook for its removal unless debugging. +$debug || +{ + trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} + +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./confstat$$-$RANDOM + (umask 077 && mkdir $tmp) +} || +{ + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF + +# +# CONFIG_FILES section. +# + +# No need to generate the scripts if there are no CONFIG_FILES. +# This happens for instance when ./config.status config.h +if test -n "\$CONFIG_FILES"; then + # Protect against being on the right side of a sed subst in config.status. + sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; + s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +s,@SHELL@,$SHELL,;t t +s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +s,@exec_prefix@,$exec_prefix,;t t +s,@prefix@,$prefix,;t t +s,@program_transform_name@,$program_transform_name,;t t +s,@bindir@,$bindir,;t t +s,@sbindir@,$sbindir,;t t +s,@libexecdir@,$libexecdir,;t t +s,@datadir@,$datadir,;t t +s,@sysconfdir@,$sysconfdir,;t t +s,@sharedstatedir@,$sharedstatedir,;t t +s,@localstatedir@,$localstatedir,;t t +s,@libdir@,$libdir,;t t +s,@includedir@,$includedir,;t t +s,@oldincludedir@,$oldincludedir,;t t +s,@infodir@,$infodir,;t t +s,@mandir@,$mandir,;t t +s,@build_alias@,$build_alias,;t t +s,@host_alias@,$host_alias,;t t +s,@target_alias@,$target_alias,;t t +s,@DEFS@,$DEFS,;t t +s,@ECHO_C@,$ECHO_C,;t t +s,@ECHO_N@,$ECHO_N,;t t +s,@ECHO_T@,$ECHO_T,;t t +s,@LIBS@,$LIBS,;t t +s,@SET_MAKE@,$SET_MAKE,;t t +s,@CC@,$CC,;t t +s,@CFLAGS@,$CFLAGS,;t t +s,@LDFLAGS@,$LDFLAGS,;t t +s,@CPPFLAGS@,$CPPFLAGS,;t t +s,@ac_ct_CC@,$ac_ct_CC,;t t +s,@EXEEXT@,$EXEEXT,;t t +s,@OBJEXT@,$OBJEXT,;t t +s,@RANLIB@,$RANLIB,;t t +s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t +s,@ACLOCAL@,$ACLOCAL,;t t +s,@AUTOCONF@,$AUTOCONF,;t t +s,@AUTOHEADER@,$AUTOHEADER,;t t +s,@WARN_CFLAGS@,$WARN_CFLAGS,;t t +s,@WARN_PEDANTIC@,$WARN_PEDANTIC,;t t +s,@WERROR@,$WERROR,;t t +s,@CPP@,$CPP,;t t +s,@EGREP@,$EGREP,;t t +s,@MAINT@,$MAINT,;t t +s,@build@,$build,;t t +s,@build_cpu@,$build_cpu,;t t +s,@build_vendor@,$build_vendor,;t t +s,@build_os@,$build_os,;t t +s,@host@,$host,;t t +s,@host_cpu@,$host_cpu,;t t +s,@host_vendor@,$host_vendor,;t t +s,@host_os@,$host_os,;t t +s,@target@,$target,;t t +s,@target_cpu@,$target_cpu,;t t +s,@target_vendor@,$target_vendor,;t t +s,@target_os@,$target_os,;t t +s,@enable_decimal_float@,$enable_decimal_float,;t t +s,@LIBOBJS@,$LIBOBJS,;t t +s,@LTLIBOBJS@,$LTLIBOBJS,;t t +CEOF + +_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF + # Split the substitutions into bite-sized pieces for seds with + # small command number limits, like on Digital OSF/1 and HP-UX. + ac_max_sed_lines=48 + ac_sed_frag=1 # Number of current file. + ac_beg=1 # First line for current file. + ac_end=$ac_max_sed_lines # Line after last line for current file. + ac_more_lines=: + ac_sed_cmds= + while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + else + sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + fi + if test ! -s $tmp/subs.frag; then + ac_more_lines=false + else + # The purpose of the label and of the branching condition is to + # speed up the sed processing (if there are no `@' at all, there + # is no need to browse any of the substitutions). + # These are the two extra sed commands mentioned above. + (echo ':t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" + else + ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" + fi + ac_sed_frag=`expr $ac_sed_frag + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_lines` + fi + done + if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat + fi +fi # test -n "$CONFIG_FILES" + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; + esac + + # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + + + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + configure_input= + else + configure_input="$ac_file. " + fi + configure_input=$configure_input"Generated from `echo $ac_file_in | + sed 's,.*/,,'` by configure." + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + echo "$f";; + *) # Relative + if test -f "$f"; then + # Build tree + echo "$f" + elif test -f "$srcdir/$f"; then + # Source tree + echo "$srcdir/$f" + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s,@configure_input@,$configure_input,;t t +s,@srcdir@,$ac_srcdir,;t t +s,@abs_srcdir@,$ac_abs_srcdir,;t t +s,@top_srcdir@,$ac_top_srcdir,;t t +s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +s,@builddir@,$ac_builddir,;t t +s,@abs_builddir@,$ac_abs_builddir,;t t +s,@top_builddir@,$ac_top_builddir,;t t +s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out + rm -f $tmp/stdin + if test x"$ac_file" != x-; then + mv $tmp/out $ac_file + else + cat $tmp/out + rm -f $tmp/out + fi + +done +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + +# +# CONFIG_HEADER section. +# + +# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +# NAME is the cpp macro being defined and VALUE is the value it is being given. +# +# ac_d sets the value in "#define NAME VALUE" lines. +ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' +ac_dB='[ ].*$,\1#\2' +ac_dC=' ' +ac_dD=',;t' +# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_uB='$,\1#\2define\3' +ac_uC=' ' +ac_uD=',;t' + +for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; + esac + + test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + # Do quote $f, to prevent DOS paths from being IFS'd. + echo "$f";; + *) # Relative + if test -f "$f"; then + # Build tree + echo "$f" + elif test -f "$srcdir/$f"; then + # Source tree + echo "$srcdir/$f" + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } + # Remove the trailing spaces. + sed 's/[ ]*$//' $ac_file_inputs >$tmp/in + +_ACEOF + +# Transform confdefs.h into two sed scripts, `conftest.defines' and +# `conftest.undefs', that substitutes the proper values into +# config.h.in to produce config.h. The first handles `#define' +# templates, and the second `#undef' templates. +# And first: Protect against being on the right side of a sed subst in +# config.status. Protect against being in an unquoted here document +# in config.status. +rm -f conftest.defines conftest.undefs +# Using a here document instead of a string reduces the quoting nightmare. +# Putting comments in sed scripts is not portable. +# +# `end' is used to avoid that the second main sed command (meant for +# 0-ary CPP macros) applies to n-ary macro definitions. +# See the Autoconf documentation for `clear'. +cat >confdef2sed.sed <<\_ACEOF +s/[\\&,]/\\&/g +s,[\\$`],\\&,g +t clear +: clear +s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp +t end +s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp +: end +_ACEOF +# If some macros were called several times there might be several times +# the same #defines, which is useless. Nevertheless, we may not want to +# sort them, since we want the *last* AC-DEFINE to be honored. +uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines +sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs +rm -f confdef2sed.sed + +# This sed command replaces #undef with comments. This is necessary, for +# example, in the case of _POSIX_SOURCE, which is predefined and required +# on some systems where configure will not decide to define it. +cat >>conftest.undefs <<\_ACEOF +s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, +_ACEOF + +# Break up conftest.defines because some shells have a limit on the size +# of here documents, and old seds have small limits too (100 cmds). +echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS +echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS +echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS +echo ' :' >>$CONFIG_STATUS +rm -f conftest.tail +while grep . conftest.defines >/dev/null +do + # Write a limited-size here document to $tmp/defines.sed. + echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS + # Speed up: don't consider the non `#define' lines. + echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS + # Work around the forget-to-reset-the-flag bug. + echo 't clr' >>$CONFIG_STATUS + echo ': clr' >>$CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS + echo 'CEOF + sed -f $tmp/defines.sed $tmp/in >$tmp/out + rm -f $tmp/in + mv $tmp/out $tmp/in +' >>$CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail + rm -f conftest.defines + mv conftest.tail conftest.defines +done +rm -f conftest.defines +echo ' fi # grep' >>$CONFIG_STATUS +echo >>$CONFIG_STATUS + +# Break up conftest.undefs because some shells have a limit on the size +# of here documents, and old seds have small limits too (100 cmds). +echo ' # Handle all the #undef templates' >>$CONFIG_STATUS +rm -f conftest.tail +while grep . conftest.undefs >/dev/null +do + # Write a limited-size here document to $tmp/undefs.sed. + echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS + # Speed up: don't consider the non `#undef' + echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS + # Work around the forget-to-reset-the-flag bug. + echo 't clr' >>$CONFIG_STATUS + echo ': clr' >>$CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS + echo 'CEOF + sed -f $tmp/undefs.sed $tmp/in >$tmp/out + rm -f $tmp/in + mv $tmp/out $tmp/in +' >>$CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail + rm -f conftest.undefs + mv conftest.tail conftest.undefs +done +rm -f conftest.undefs + +cat >>$CONFIG_STATUS <<\_ACEOF + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + echo "/* Generated by configure. */" >$tmp/config.h + else + echo "/* $ac_file. Generated by configure. */" >$tmp/config.h + fi + cat $tmp/in >>$tmp/config.h + rm -f $tmp/in + if test x"$ac_file" != x-; then + if diff $ac_file $tmp/config.h >/dev/null 2>&1; then + { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 +echo "$as_me: $ac_file is unchanged" >&6;} + else + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + rm -f $ac_file + mv $tmp/config.h $ac_file + fi + else + cat $tmp/config.h + rm -f $tmp/config.h + fi + # Run the commands associated with the file. + case $ac_file in + config.h ) echo timestamp > stamp-h1 ;; + esac +done +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + +# +# CONFIG_COMMANDS section. +# +for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue + ac_dest=`echo "$ac_file" | sed 's,:.*,,'` + ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_dir=`(dirname "$ac_dest") 2>/dev/null || +$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_dest" : 'X\(//\)[^/]' \| \ + X"$ac_dest" : 'X\(//\)$' \| \ + X"$ac_dest" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_dest" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + + { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 +echo "$as_me: executing $ac_dest commands" >&6;} + case $ac_dest in + gstdint.h ) +if test "$GCC" = yes; then + echo "/* generated for " `$CC --version | sed 1q` "*/" > tmp-stdint.h +else + echo "/* generated for $CC */" > tmp-stdint.h +fi + +sed 's/^ *//' >> tmp-stdint.h <<EOF + + #ifndef GCC_GENERATED_STDINT_H + #define GCC_GENERATED_STDINT_H 1 + + #include <sys/types.h> +EOF + +if test "$acx_cv_header_stdint" != stdint.h; then + echo "#include <stddef.h>" >> tmp-stdint.h +fi +if test "$acx_cv_header_stdint" != stddef.h; then + echo "#include <$acx_cv_header_stdint>" >> tmp-stdint.h +fi + +sed 's/^ *//' >> tmp-stdint.h <<EOF + /* glibc uses these symbols as guards to prevent redefinitions. */ + #ifdef __int8_t_defined + #define _INT8_T + #define _INT16_T + #define _INT32_T + #endif + #ifdef __uint32_t_defined + #define _UINT32_T + #endif + +EOF + +# ----------------- done header, emit basic int types ------------- +if test "$acx_cv_header_stdint" = stddef.h; then + sed 's/^ *//' >> tmp-stdint.h <<EOF + + #ifndef _UINT8_T + #define _UINT8_T + #ifndef __uint8_t_defined + #define __uint8_t_defined + typedef unsigned $acx_cv_type_int8_t uint8_t; + #endif + #endif + + #ifndef _UINT16_T + #define _UINT16_T + #ifndef __uint16_t_defined + #define __uint16_t_defined + typedef unsigned $acx_cv_type_int16_t uint16_t; + #endif + #endif + + #ifndef _UINT32_T + #define _UINT32_T + #ifndef __uint32_t_defined + #define __uint32_t_defined + typedef unsigned $acx_cv_type_int32_t uint32_t; + #endif + #endif + + #ifndef _INT8_T + #define _INT8_T + #ifndef __int8_t_defined + #define __int8_t_defined + typedef $acx_cv_type_int8_t int8_t; + #endif + #endif + + #ifndef _INT16_T + #define _INT16_T + #ifndef __int16_t_defined + #define __int16_t_defined + typedef $acx_cv_type_int16_t int16_t; + #endif + #endif + + #ifndef _INT32_T + #define _INT32_T + #ifndef __int32_t_defined + #define __int32_t_defined + typedef $acx_cv_type_int32_t int32_t; + #endif + #endif +EOF +elif test "$ac_cv_type_u_int32_t" = yes; then + sed 's/^ *//' >> tmp-stdint.h <<EOF + + /* int8_t int16_t int32_t defined by inet code, we do the u_intXX types */ + #ifndef _INT8_T + #define _INT8_T + #endif + #ifndef _INT16_T + #define _INT16_T + #endif + #ifndef _INT32_T + #define _INT32_T + #endif + + #ifndef _UINT8_T + #define _UINT8_T + #ifndef __uint8_t_defined + #define __uint8_t_defined + typedef u_int8_t uint8_t; + #endif + #endif + + #ifndef _UINT16_T + #define _UINT16_T + #ifndef __uint16_t_defined + #define __uint16_t_defined + typedef u_int16_t uint16_t; + #endif + #endif + + #ifndef _UINT32_T + #define _UINT32_T + #ifndef __uint32_t_defined + #define __uint32_t_defined + typedef u_int32_t uint32_t; + #endif + #endif +EOF +else + sed 's/^ *//' >> tmp-stdint.h <<EOF + + /* Some systems have guard macros to prevent redefinitions, define them. */ + #ifndef _INT8_T + #define _INT8_T + #endif + #ifndef _INT16_T + #define _INT16_T + #endif + #ifndef _INT32_T + #define _INT32_T + #endif + #ifndef _UINT8_T + #define _UINT8_T + #endif + #ifndef _UINT16_T + #define _UINT16_T + #endif + #ifndef _UINT32_T + #define _UINT32_T + #endif +EOF +fi + +# ------------- done basic int types, emit int64_t types ------------ +if test "$ac_cv_type_uint64_t" = yes; then + sed 's/^ *//' >> tmp-stdint.h <<EOF + + /* system headers have good uint64_t and int64_t */ + #ifndef _INT64_T + #define _INT64_T + #endif + #ifndef _UINT64_T + #define _UINT64_T + #endif +EOF +elif test "$ac_cv_type_u_int64_t" = yes; then + sed 's/^ *//' >> tmp-stdint.h <<EOF + + /* system headers have an u_int64_t (and int64_t) */ + #ifndef _INT64_T + #define _INT64_T + #endif + #ifndef _UINT64_T + #define _UINT64_T + #ifndef __uint64_t_defined + #define __uint64_t_defined + typedef u_int64_t uint64_t; + #endif + #endif +EOF +elif test -n "$acx_cv_type_int64_t"; then + sed 's/^ *//' >> tmp-stdint.h <<EOF + + /* architecture has a 64-bit type, $acx_cv_type_int64_t */ + #ifndef _INT64_T + #define _INT64_T + typedef $acx_cv_type_int64_t int64_t; + #endif + #ifndef _UINT64_T + #define _UINT64_T + #ifndef __uint64_t_defined + #define __uint64_t_defined + typedef unsigned $acx_cv_type_int64_t uint64_t; + #endif + #endif +EOF +else + sed 's/^ *//' >> tmp-stdint.h <<EOF + + /* some common heuristics for int64_t, using compiler-specific tests */ + #if defined __STDC_VERSION__ && (__STDC_VERSION__-0) >= 199901L + #ifndef _INT64_T + #define _INT64_T + #ifndef __int64_t_defined + typedef long long int64_t; + #endif + #endif + #ifndef _UINT64_T + #define _UINT64_T + typedef unsigned long long uint64_t; + #endif + + #elif defined __GNUC__ && defined (__STDC__) && __STDC__-0 + /* NextStep 2.0 cc is really gcc 1.93 but it defines __GNUC__ = 2 and + does not implement __extension__. But that compiler doesn't define + __GNUC_MINOR__. */ + # if __GNUC__ < 2 || (__NeXT__ && !__GNUC_MINOR__) + # define __extension__ + # endif + + # ifndef _INT64_T + # define _INT64_T + __extension__ typedef long long int64_t; + # endif + # ifndef _UINT64_T + # define _UINT64_T + __extension__ typedef unsigned long long uint64_t; + # endif + + #elif !defined __STRICT_ANSI__ + # if defined _MSC_VER || defined __WATCOMC__ || defined __BORLANDC__ + + # ifndef _INT64_T + # define _INT64_T + typedef __int64 int64_t; + # endif + # ifndef _UINT64_T + # define _UINT64_T + typedef unsigned __int64 uint64_t; + # endif + # endif /* compiler */ + + #endif /* ANSI version */ +EOF +fi + +# ------------- done int64_t types, emit intptr types ------------ +if test "$ac_cv_type_uintptr_t" != yes; then + sed 's/^ *//' >> tmp-stdint.h <<EOF + + /* Define intptr_t based on sizeof(void*) = $ac_cv_sizeof_void_p */ + #ifndef __uintptr_t_defined + typedef u$acx_cv_type_intptr_t uintptr_t; + #endif + #ifndef __intptr_t_defined + typedef $acx_cv_type_intptr_t intptr_t; + #endif +EOF +fi + +# ------------- done intptr types, emit int_least types ------------ +if test "$ac_cv_type_int_least32_t" != yes; then + sed 's/^ *//' >> tmp-stdint.h <<EOF + + /* Define int_least types */ + typedef int8_t int_least8_t; + typedef int16_t int_least16_t; + typedef int32_t int_least32_t; + #ifdef _INT64_T + typedef int64_t int_least64_t; + #endif + + typedef uint8_t uint_least8_t; + typedef uint16_t uint_least16_t; + typedef uint32_t uint_least32_t; + #ifdef _UINT64_T + typedef uint64_t uint_least64_t; + #endif +EOF +fi + +# ------------- done intptr types, emit int_fast types ------------ +if test "$ac_cv_type_int_fast32_t" != yes; then + sed 's/^ *//' >> tmp-stdint.h <<EOF + + /* Define int_fast types. short is often slow */ + typedef int8_t int_fast8_t; + typedef int int_fast16_t; + typedef int32_t int_fast32_t; + #ifdef _INT64_T + typedef int64_t int_fast64_t; + #endif + + typedef uint8_t uint_fast8_t; + typedef unsigned int uint_fast16_t; + typedef uint32_t uint_fast32_t; + #ifdef _UINT64_T + typedef uint64_t uint_fast64_t; + #endif +EOF +fi + +if test "$ac_cv_type_uintmax_t" != yes; then + sed 's/^ *//' >> tmp-stdint.h <<EOF + + /* Define intmax based on what we found */ + #ifdef _INT64_T + typedef int64_t intmax_t; + #else + typedef long intmax_t; + #endif + #ifdef _UINT64_T + typedef uint64_t uintmax_t; + #else + typedef unsigned long uintmax_t; + #endif +EOF +fi + +sed 's/^ *//' >> tmp-stdint.h <<EOF + + #endif /* GCC_GENERATED_STDINT_H */ +EOF + +if test -r gstdint.h && cmp -s tmp-stdint.h gstdint.h; then + rm -f tmp-stdint.h +else + mv -f tmp-stdint.h gstdint.h +fi + + ;; + esac +done +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF + +{ (exit 0); exit 0; } +_ACEOF +chmod +x $CONFIG_STATUS +ac_clean_files=$ac_clean_files_save + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi + diff --git a/libdecnumber/configure.ac b/libdecnumber/configure.ac new file mode 100644 index 0000000..2a30707 --- /dev/null +++ b/libdecnumber/configure.ac @@ -0,0 +1,125 @@ +# configure.ac for libdecnumber -*- Autoconf -*- +# Process this file with autoconf to generate a configuration script. + +# Copyright 2005, 2006 Free Software Foundation, Inc. + +# This file is part of GCC. + +# GCC is free software; you can redistribute it and/or modify it under +# the terms of the GNU General Public License as published by the Free +# Software Foundation; either version 2, or (at your option) any +# later #version. + +# GCC is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY +# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public +# License #for more details. + +# You should have received a copy of the GNU General Public License +# along with GCC; see the file COPYING. If not, write to the Free +# Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. + +AC_PREREQ(2.59) +AC_INIT(libdecnumber, [ ], gcc-bugs@gcc.gnu.org, libdecnumber) +AC_CONFIG_SRCDIR(decNumber.h) +AC_CONFIG_MACRO_DIR(../config) + +# Checks for programs. +AC_PROG_MAKE_SET +AC_PROG_CC +AC_PROG_RANLIB + +MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing +AC_CHECK_PROGS([ACLOCAL], [aclocal], [$MISSING aclocal]) +AC_CHECK_PROGS([AUTOCONF], [autoconf], [$MISSING autoconf]) +AC_CHECK_PROGS([AUTOHEADER], [autoheader], [$MISSING autoheader]) + +# Figure out what compiler warnings we can enable. +# See config/warnings.m4 for details. + +ACX_PROG_CC_WARNING_OPTS([-W -Wall -Wwrite-strings -Wstrict-prototypes \ + -Wmissing-prototypes -Wold-style-definition \ + -Wmissing-format-attribute -Wcast-qual]) +ACX_PROG_CC_WARNING_ALMOST_PEDANTIC([-Wno-long-long]) + +# Only enable with --enable-werror-always until existing warnings are +# corrected. +ACX_PROG_CC_WARNINGS_ARE_ERRORS([manual]) + +# Checks for header files. +AC_CHECK_HEADERS(ctype.h stddef.h string.h stdio.h) +GCC_HEADER_STDINT(gstdint.h) + +# Checks for typedefs, structures, and compiler characteristics. +AC_C_CONST +AC_TYPE_OFF_T +AC_CHECK_SIZEOF(int) +AC_CHECK_SIZEOF(long) + +# Checks for library functions. +AC_HEADER_STDC + +AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable rules only needed by maintainers],, +enable_maintainer_mode=no) + +if test "x$enable_maintainer_mode" = xno; then + MAINT='#' +else + MAINT= +fi +AC_SUBST(MAINT) + +AC_CANONICAL_TARGET + +# Default decimal format +# If you change the defaults here, be sure to change them in the GCC directory also +AC_MSG_CHECKING([for decimal floating point]) +AC_ARG_ENABLE(decimal-float, +[ --enable-decimal-float={no,yes,bid,dpd} + enable decimal float extension to C. Selecting 'bid' + or 'dpd' choses which decimal floating point format + to use], +[ + case $enable_decimal_float in + yes | no | bid | dpd) ;; + *) AC_MSG_ERROR(['$enable_decimal_float' is an invalid value for --enable-decimal-float. +Valid choices are 'yes', 'bid', 'dpd', and 'no'.]) ;; + esac +], +[ + case $target in + powerpc*-*-linux* | i?86*-*-linux* | x86_64*-*-linux*) + enable_decimal_float=yes + ;; + *) + enable_decimal_float=no + ;; + esac +]) + +# x86's use BID format instead of DPD +# In theory --enable-decimal-float=no should not compile anything +# For the sake of simplicity, just use the default format in this directory +if test x$enable_decimal_float = xyes -o x$enable_decimal_float = xno; then + case $target in + i?86*-*-linux* | x86_64*-*-linux*) + enable_decimal_float=bid + ;; + *) + enable_decimal_float=dpd + ;; + esac +fi + +AC_MSG_RESULT($enable_decimal_float) +AC_SUBST(enable_decimal_float) + +AC_C_BIGENDIAN + +# Output. + +AC_CONFIG_HEADERS(config.h:config.in, [echo timestamp > stamp-h1]) +AC_CONFIG_FILES(Makefile) +AC_OUTPUT diff --git a/libdecnumber/decBasic.c b/libdecnumber/decBasic.c new file mode 100644 index 0000000..9ce277d --- /dev/null +++ b/libdecnumber/decBasic.c @@ -0,0 +1,3769 @@ +/* Common base code for the decNumber C Library. + Copyright (C) 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* decBasic.c -- common base code for Basic decimal types */ +/* ------------------------------------------------------------------ */ +/* This module comprises code that is shared between decDouble and */ +/* decQuad (but not decSingle). The main arithmetic operations are */ +/* here (Add, Subtract, Multiply, FMA, and Division operators). */ +/* */ +/* Unlike decNumber, parameterization takes place at compile time */ +/* rather than at runtime. The parameters are set in the decDouble.c */ +/* (etc.) files, which then include this one to produce the compiled */ +/* code. The functions here, therefore, are code shared between */ +/* multiple formats. */ +/* */ +/* This must be included after decCommon.c. */ +/* ------------------------------------------------------------------ */ +/* Names here refer to decFloat rather than to decDouble, etc., and */ +/* the functions are in strict alphabetical order. */ + +/* The compile-time flags SINGLE, DOUBLE, and QUAD are set up in */ +/* decCommon.c */ +#if !defined(QUAD) + #error decBasic.c must be included after decCommon.c +#endif +#if SINGLE + #error Routines in decBasic.c are for decDouble and decQuad only +#endif + +/* Private constants */ +#define DIVIDE 0x80000000 /* Divide operations [as flags] */ +#define REMAINDER 0x40000000 /* .. */ +#define DIVIDEINT 0x20000000 /* .. */ +#define REMNEAR 0x10000000 /* .. */ + +/* Private functions (local, used only by routines in this module) */ +static decFloat *decDivide(decFloat *, const decFloat *, + const decFloat *, decContext *, uInt); +static decFloat *decCanonical(decFloat *, const decFloat *); +static void decFiniteMultiply(bcdnum *, uByte *, const decFloat *, + const decFloat *); +static decFloat *decInfinity(decFloat *, const decFloat *); +static decFloat *decInvalid(decFloat *, decContext *); +static decFloat *decNaNs(decFloat *, const decFloat *, const decFloat *, + decContext *); +static Int decNumCompare(const decFloat *, const decFloat *, Flag); +static decFloat *decToIntegral(decFloat *, const decFloat *, decContext *, + enum rounding, Flag); +static uInt decToInt32(const decFloat *, decContext *, enum rounding, + Flag, Flag); + +/* ------------------------------------------------------------------ */ +/* decCanonical -- copy a decFloat, making canonical */ +/* */ +/* result gets the canonicalized df */ +/* df is the decFloat to copy and make canonical */ +/* returns result */ +/* */ +/* This is exposed via decFloatCanonical for Double and Quad only. */ +/* This works on specials, too; no error or exception is possible. */ +/* ------------------------------------------------------------------ */ +static decFloat * decCanonical(decFloat *result, const decFloat *df) { + uInt encode, precode, dpd; /* work */ + uInt inword, uoff, canon; /* .. */ + Int n; /* counter (down) */ + if (df!=result) *result=*df; /* effect copy if needed */ + if (DFISSPECIAL(result)) { + if (DFISINF(result)) return decInfinity(result, df); /* clean Infinity */ + /* is a NaN */ + DFWORD(result, 0)&=~ECONNANMASK; /* clear ECON except selector */ + if (DFISCCZERO(df)) return result; /* coefficient continuation is 0 */ + /* drop through to check payload */ + } + /* return quickly if the coefficient continuation is canonical */ + { /* declare block */ + #if DOUBLE + uInt sourhi=DFWORD(df, 0); + uInt sourlo=DFWORD(df, 1); + if (CANONDPDOFF(sourhi, 8) + && CANONDPDTWO(sourhi, sourlo, 30) + && CANONDPDOFF(sourlo, 20) + && CANONDPDOFF(sourlo, 10) + && CANONDPDOFF(sourlo, 0)) return result; + #elif QUAD + uInt sourhi=DFWORD(df, 0); + uInt sourmh=DFWORD(df, 1); + uInt sourml=DFWORD(df, 2); + uInt sourlo=DFWORD(df, 3); + if (CANONDPDOFF(sourhi, 4) + && CANONDPDTWO(sourhi, sourmh, 26) + && CANONDPDOFF(sourmh, 16) + && CANONDPDOFF(sourmh, 6) + && CANONDPDTWO(sourmh, sourml, 28) + && CANONDPDOFF(sourml, 18) + && CANONDPDOFF(sourml, 8) + && CANONDPDTWO(sourml, sourlo, 30) + && CANONDPDOFF(sourlo, 20) + && CANONDPDOFF(sourlo, 10) + && CANONDPDOFF(sourlo, 0)) return result; + #endif + } /* block */ + + /* Loop to repair a non-canonical coefficent, as needed */ + inword=DECWORDS-1; /* current input word */ + uoff=0; /* bit offset of declet */ + encode=DFWORD(result, inword); + for (n=DECLETS-1; n>=0; n--) { /* count down declets of 10 bits */ + dpd=encode>>uoff; + uoff+=10; + if (uoff>32) { /* crossed uInt boundary */ + inword--; + encode=DFWORD(result, inword); + uoff-=32; + dpd|=encode<<(10-uoff); /* get pending bits */ + } + dpd&=0x3ff; /* clear uninteresting bits */ + if (dpd<0x16e) continue; /* must be canonical */ + canon=BIN2DPD[DPD2BIN[dpd]]; /* determine canonical declet */ + if (canon==dpd) continue; /* have canonical declet */ + /* need to replace declet */ + if (uoff>=10) { /* all within current word */ + encode&=~(0x3ff<<(uoff-10)); /* clear the 10 bits ready for replace */ + encode|=canon<<(uoff-10); /* insert the canonical form */ + DFWORD(result, inword)=encode; /* .. and save */ + continue; + } + /* straddled words */ + precode=DFWORD(result, inword+1); /* get previous */ + precode&=0xffffffff>>(10-uoff); /* clear top bits */ + DFWORD(result, inword+1)=precode|(canon<<(32-(10-uoff))); + encode&=0xffffffff<<uoff; /* clear bottom bits */ + encode|=canon>>(10-uoff); /* insert canonical */ + DFWORD(result, inword)=encode; /* .. and save */ + } /* n */ + return result; + } /* decCanonical */ + +/* ------------------------------------------------------------------ */ +/* decDivide -- divide operations */ +/* */ +/* result gets the result of dividing dfl by dfr: */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* set is the context */ +/* op is the operation selector */ +/* returns result */ +/* */ +/* op is one of DIVIDE, REMAINDER, DIVIDEINT, or REMNEAR. */ +/* ------------------------------------------------------------------ */ +#define DIVCOUNT 0 /* 1 to instrument subtractions counter */ +#define DIVBASE BILLION /* the base used for divide */ +#define DIVOPLEN DECPMAX9 /* operand length ('digits' base 10**9) */ +#define DIVACCLEN (DIVOPLEN*3) /* accumulator length (ditto) */ +static decFloat * decDivide(decFloat *result, const decFloat *dfl, + const decFloat *dfr, decContext *set, uInt op) { + decFloat quotient; /* for remainders */ + bcdnum num; /* for final conversion */ + uInt acc[DIVACCLEN]; /* coefficent in base-billion .. */ + uInt div[DIVOPLEN]; /* divisor in base-billion .. */ + uInt quo[DIVOPLEN+1]; /* quotient in base-billion .. */ + uByte bcdacc[(DIVOPLEN+1)*9+2]; /* for quotient in BCD, +1, +1 */ + uInt *msua, *msud, *msuq; /* -> msu of acc, div, and quo */ + Int divunits, accunits; /* lengths */ + Int quodigits; /* digits in quotient */ + uInt *lsua, *lsuq; /* -> current acc and quo lsus */ + Int length, multiplier; /* work */ + uInt carry, sign; /* .. */ + uInt *ua, *ud, *uq; /* .. */ + uByte *ub; /* .. */ + uInt divtop; /* top unit of div adjusted for estimating */ + #if DIVCOUNT + static uInt maxcount=0; /* worst-seen subtractions count */ + uInt divcount=0; /* subtractions count [this divide] */ + #endif + + /* calculate sign */ + num.sign=(DFWORD(dfl, 0)^DFWORD(dfr, 0)) & DECFLOAT_Sign; + + if (DFISSPECIAL(dfl) || DFISSPECIAL(dfr)) { /* either is special? */ + /* NaNs are handled as usual */ + if (DFISNAN(dfl) || DFISNAN(dfr)) return decNaNs(result, dfl, dfr, set); + /* one or two infinities */ + if (DFISINF(dfl)) { + if (DFISINF(dfr)) return decInvalid(result, set); /* Two infinities bad */ + if (op&(REMAINDER|REMNEAR)) return decInvalid(result, set); /* as is rem */ + /* Infinity/x is infinite and quiet, even if x=0 */ + DFWORD(result, 0)=num.sign; + return decInfinity(result, result); + } + /* must be x/Infinity -- remainders are lhs */ + if (op&(REMAINDER|REMNEAR)) return decCanonical(result, dfl); + /* divides: return zero with correct sign and exponent depending */ + /* on op (Etiny for divide, 0 for divideInt) */ + decFloatZero(result); + if (op==DIVIDEINT) DFWORD(result, 0)|=num.sign; /* add sign */ + else DFWORD(result, 0)=num.sign; /* zeros the exponent, too */ + return result; + } + /* next, handle zero operands (x/0 and 0/x) */ + if (DFISZERO(dfr)) { /* x/0 */ + if (DFISZERO(dfl)) { /* 0/0 is undefined */ + decFloatZero(result); + DFWORD(result, 0)=DECFLOAT_qNaN; + set->status|=DEC_Division_undefined; + return result; + } + if (op&(REMAINDER|REMNEAR)) return decInvalid(result, set); /* bad rem */ + set->status|=DEC_Division_by_zero; + DFWORD(result, 0)=num.sign; + return decInfinity(result, result); /* x/0 -> signed Infinity */ + } + num.exponent=GETEXPUN(dfl)-GETEXPUN(dfr); /* ideal exponent */ + if (DFISZERO(dfl)) { /* 0/x (x!=0) */ + /* if divide, result is 0 with ideal exponent; divideInt has */ + /* exponent=0, remainders give zero with lower exponent */ + if (op&DIVIDEINT) { + decFloatZero(result); + DFWORD(result, 0)|=num.sign; /* add sign */ + return result; + } + if (!(op&DIVIDE)) { /* a remainder */ + /* exponent is the minimum of the operands */ + num.exponent=MINI(GETEXPUN(dfl), GETEXPUN(dfr)); + /* if the result is zero the sign shall be sign of dfl */ + num.sign=DFWORD(dfl, 0)&DECFLOAT_Sign; + } + bcdacc[0]=0; + num.msd=bcdacc; /* -> 0 */ + num.lsd=bcdacc; /* .. */ + return decFinalize(result, &num, set); /* [divide may clamp exponent] */ + } /* 0/x */ + /* [here, both operands are known to be finite and non-zero] */ + + /* extract the operand coefficents into 'units' which are */ + /* base-billion; the lhs is high-aligned in acc and the msu of both */ + /* acc and div is at the right-hand end of array (offset length-1); */ + /* the quotient can need one more unit than the operands as digits */ + /* in it are not necessarily aligned neatly; further, the quotient */ + /* may not start accumulating until after the end of the initial */ + /* operand in acc if that is small (e.g., 1) so the accumulator */ + /* must have at least that number of units extra (at the ls end) */ + GETCOEFFBILL(dfl, acc+DIVACCLEN-DIVOPLEN); + GETCOEFFBILL(dfr, div); + /* zero the low uInts of acc */ + acc[0]=0; + acc[1]=0; + acc[2]=0; + acc[3]=0; + #if DOUBLE + #if DIVOPLEN!=2 + #error Unexpected Double DIVOPLEN + #endif + #elif QUAD + acc[4]=0; + acc[5]=0; + acc[6]=0; + acc[7]=0; + #if DIVOPLEN!=4 + #error Unexpected Quad DIVOPLEN + #endif + #endif + + /* set msu and lsu pointers */ + msua=acc+DIVACCLEN-1; /* [leading zeros removed below] */ + msuq=quo+DIVOPLEN; + /*[loop for div will terminate because operands are non-zero] */ + for (msud=div+DIVOPLEN-1; *msud==0;) msud--; + /* the initial least-significant unit of acc is set so acc appears */ + /* to have the same length as div. */ + /* This moves one position towards the least possible for each */ + /* iteration */ + divunits=(Int)(msud-div+1); /* precalculate */ + lsua=msua-divunits+1; /* initial working lsu of acc */ + lsuq=msuq; /* and of quo */ + + /* set up the estimator for the multiplier; this is the msu of div, */ + /* plus two bits from the unit below (if any) rounded up by one if */ + /* there are any non-zero bits or units below that [the extra two */ + /* bits makes for a much better estimate when the top unit is small] */ + divtop=*msud<<2; + if (divunits>1) { + uInt *um=msud-1; + uInt d=*um; + if (d>=750000000) {divtop+=3; d-=750000000;} + else if (d>=500000000) {divtop+=2; d-=500000000;} + else if (d>=250000000) {divtop++; d-=250000000;} + if (d) divtop++; + else for (um--; um>=div; um--) if (*um) { + divtop++; + break; + } + } /* >1 unit */ + + #if DECTRACE + {Int i; + printf("----- div="); + for (i=divunits-1; i>=0; i--) printf("%09ld ", (LI)div[i]); + printf("\n");} + #endif + + /* now collect up to DECPMAX+1 digits in the quotient (this may */ + /* need OPLEN+1 uInts if unaligned) */ + quodigits=0; /* no digits yet */ + for (;; lsua--) { /* outer loop -- each input position */ + #if DECCHECK + if (lsua<acc) { + printf("Acc underrun...\n"); + break; + } + #endif + #if DECTRACE + printf("Outer: quodigits=%ld acc=", (LI)quodigits); + for (ua=msua; ua>=lsua; ua--) printf("%09ld ", (LI)*ua); + printf("\n"); + #endif + *lsuq=0; /* default unit result is 0 */ + for (;;) { /* inner loop -- calculate quotient unit */ + /* strip leading zero units from acc (either there initially or */ + /* from subtraction below); this may strip all if exactly 0 */ + for (; *msua==0 && msua>=lsua;) msua--; + accunits=(Int)(msua-lsua+1); /* [maybe 0] */ + /* subtraction is only necessary and possible if there are as */ + /* least as many units remaining in acc for this iteration as */ + /* there are in div */ + if (accunits<divunits) { + if (accunits==0) msua++; /* restore */ + break; + } + + /* If acc is longer than div then subtraction is definitely */ + /* possible (as msu of both is non-zero), but if they are the */ + /* same length a comparison is needed. */ + /* If a subtraction is needed then a good estimate of the */ + /* multiplier for the subtraction is also needed in order to */ + /* minimise the iterations of this inner loop because the */ + /* subtractions needed dominate division performance. */ + if (accunits==divunits) { + /* compare the high divunits of acc and div: */ + /* acc<div: this quotient unit is unchanged; subtraction */ + /* will be possible on the next iteration */ + /* acc==div: quotient gains 1, set acc=0 */ + /* acc>div: subtraction necessary at this position */ + for (ud=msud, ua=msua; ud>div; ud--, ua--) if (*ud!=*ua) break; + /* [now at first mismatch or lsu] */ + if (*ud>*ua) break; /* next time... */ + if (*ud==*ua) { /* all compared equal */ + *lsuq+=1; /* increment result */ + msua=lsua; /* collapse acc units */ + *msua=0; /* .. to a zero */ + break; + } + + /* subtraction necessary; estimate multiplier [see above] */ + /* if both *msud and *msua are small it is cost-effective to */ + /* bring in part of the following units (if any) to get a */ + /* better estimate (assume some other non-zero in div) */ + #define DIVLO 1000000U + #define DIVHI (DIVBASE/DIVLO) + #if DECUSE64 + if (divunits>1) { + /* there cannot be a *(msud-2) for DECDOUBLE so next is */ + /* an exact calculation unless DECQUAD (which needs to */ + /* assume bits out there if divunits>2) */ + uLong mul=(uLong)*msua * DIVBASE + *(msua-1); + uLong div=(uLong)*msud * DIVBASE + *(msud-1); + #if QUAD + if (divunits>2) div++; + #endif + mul/=div; + multiplier=(Int)mul; + } + else multiplier=*msua/(*msud); + #else + if (divunits>1 && *msua<DIVLO && *msud<DIVLO) { + multiplier=(*msua*DIVHI + *(msua-1)/DIVLO) + /(*msud*DIVHI + *(msud-1)/DIVLO +1); + } + else multiplier=(*msua<<2)/divtop; + #endif + } + else { /* accunits>divunits */ + /* msud is one unit 'lower' than msua, so estimate differently */ + #if DECUSE64 + uLong mul; + /* as before, bring in extra digits if possible */ + if (divunits>1 && *msua<DIVLO && *msud<DIVLO) { + mul=((uLong)*msua * DIVHI * DIVBASE) + *(msua-1) * DIVHI + + *(msua-2)/DIVLO; + mul/=(*msud*DIVHI + *(msud-1)/DIVLO +1); + } + else if (divunits==1) { + mul=(uLong)*msua * DIVBASE + *(msua-1); + mul/=*msud; /* no more to the right */ + } + else { + mul=(uLong)(*msua) * (uInt)(DIVBASE<<2) + (*(msua-1)<<2); + mul/=divtop; /* [divtop already allows for sticky bits] */ + } + multiplier=(Int)mul; + #else + multiplier=*msua * ((DIVBASE<<2)/divtop); + #endif + } + if (multiplier==0) multiplier=1; /* marginal case */ + *lsuq+=multiplier; + + #if DIVCOUNT + /* printf("Multiplier: %ld\n", (LI)multiplier); */ + divcount++; + #endif + + /* Carry out the subtraction acc-(div*multiplier); for each */ + /* unit in div, do the multiply, split to units (see */ + /* decFloatMultiply for the algorithm), and subtract from acc */ + #define DIVMAGIC 2305843009U /* 2**61/10**9 */ + #define DIVSHIFTA 29 + #define DIVSHIFTB 32 + carry=0; + for (ud=div, ua=lsua; ud<=msud; ud++, ua++) { + uInt lo, hop; + #if DECUSE64 + uLong sub=(uLong)multiplier*(*ud)+carry; + if (sub<DIVBASE) { + carry=0; + lo=(uInt)sub; + } + else { + hop=(uInt)(sub>>DIVSHIFTA); + carry=(uInt)(((uLong)hop*DIVMAGIC)>>DIVSHIFTB); + /* the estimate is now in hi; now calculate sub-hi*10**9 */ + /* to get the remainder (which will be <DIVBASE)) */ + lo=(uInt)sub; + lo-=carry*DIVBASE; /* low word of result */ + if (lo>=DIVBASE) { + lo-=DIVBASE; /* correct by +1 */ + carry++; + } + } + #else /* 32-bit */ + uInt hi; + /* calculate multiplier*(*ud) into hi and lo */ + LONGMUL32HI(hi, *ud, multiplier); /* get the high word */ + lo=multiplier*(*ud); /* .. and the low */ + lo+=carry; /* add the old hi */ + carry=hi+(lo<carry); /* .. with any carry */ + if (carry || lo>=DIVBASE) { /* split is needed */ + hop=(carry<<3)+(lo>>DIVSHIFTA); /* hi:lo/2**29 */ + LONGMUL32HI(carry, hop, DIVMAGIC); /* only need the high word */ + /* [DIVSHIFTB is 32, so carry can be used directly] */ + /* the estimate is now in carry; now calculate hi:lo-est*10**9; */ + /* happily the top word of the result is irrelevant because it */ + /* will always be zero so this needs only one multiplication */ + lo-=(carry*DIVBASE); + /* the correction here will be at most +1; do it */ + if (lo>=DIVBASE) { + lo-=DIVBASE; + carry++; + } + } + #endif + if (lo>*ua) { /* borrow needed */ + *ua+=DIVBASE; + carry++; + } + *ua-=lo; + } /* ud loop */ + if (carry) *ua-=carry; /* accdigits>divdigits [cannot borrow] */ + } /* inner loop */ + + /* the outer loop terminates when there is either an exact result */ + /* or enough digits; first update the quotient digit count and */ + /* pointer (if any significant digits) */ + #if DECTRACE + if (*lsuq || quodigits) printf("*lsuq=%09ld\n", (LI)*lsuq); + #endif + if (quodigits) { + quodigits+=9; /* had leading unit earlier */ + lsuq--; + if (quodigits>DECPMAX+1) break; /* have enough */ + } + else if (*lsuq) { /* first quotient digits */ + const uInt *pow; + for (pow=DECPOWERS; *lsuq>=*pow; pow++) quodigits++; + lsuq--; + /* [cannot have >DECPMAX+1 on first unit] */ + } + + if (*msua!=0) continue; /* not an exact result */ + /* acc is zero iff used all of original units and zero down to lsua */ + /* (must also continue to original lsu for correct quotient length) */ + if (lsua>acc+DIVACCLEN-DIVOPLEN) continue; + for (; msua>lsua && *msua==0;) msua--; + if (*msua==0 && msua==lsua) break; + } /* outer loop */ + + /* all of the original operand in acc has been covered at this point */ + /* quotient now has at least DECPMAX+2 digits */ + /* *msua is now non-0 if inexact and sticky bits */ + /* lsuq is one below the last uint of the quotient */ + lsuq++; /* set -> true lsu of quo */ + if (*msua) *lsuq|=1; /* apply sticky bit */ + + /* quo now holds the (unrounded) quotient in base-billion; one */ + /* base-billion 'digit' per uInt. */ + #if DECTRACE + printf("DivQuo:"); + for (uq=msuq; uq>=lsuq; uq--) printf(" %09ld", (LI)*uq); + printf("\n"); + #endif + + /* Now convert to BCD for rounding and cleanup, starting from the */ + /* most significant end [offset by one into bcdacc to leave room */ + /* for a possible carry digit if rounding for REMNEAR is needed] */ + for (uq=msuq, ub=bcdacc+1; uq>=lsuq; uq--, ub+=9) { + uInt top, mid, rem; /* work */ + if (*uq==0) { /* no split needed */ + UINTAT(ub)=0; /* clear 9 BCD8s */ + UINTAT(ub+4)=0; /* .. */ + *(ub+8)=0; /* .. */ + continue; + } + /* *uq is non-zero -- split the base-billion digit into */ + /* hi, mid, and low three-digits */ + #define divsplit9 1000000 /* divisor */ + #define divsplit6 1000 /* divisor */ + /* The splitting is done by simple divides and remainders, */ + /* assuming the compiler will optimize these [GCC does] */ + top=*uq/divsplit9; + rem=*uq%divsplit9; + mid=rem/divsplit6; + rem=rem%divsplit6; + /* lay out the nine BCD digits (plus one unwanted byte) */ + UINTAT(ub) =UINTAT(&BIN2BCD8[top*4]); + UINTAT(ub+3)=UINTAT(&BIN2BCD8[mid*4]); + UINTAT(ub+6)=UINTAT(&BIN2BCD8[rem*4]); + } /* BCD conversion loop */ + ub--; /* -> lsu */ + + /* complete the bcdnum; quodigits is correct, so the position of */ + /* the first non-zero is known */ + num.msd=bcdacc+1+(msuq-lsuq+1)*9-quodigits; + num.lsd=ub; + + /* make exponent adjustments, etc */ + if (lsua<acc+DIVACCLEN-DIVOPLEN) { /* used extra digits */ + num.exponent-=(Int)((acc+DIVACCLEN-DIVOPLEN-lsua)*9); + /* if the result was exact then there may be up to 8 extra */ + /* trailing zeros in the overflowed quotient final unit */ + if (*msua==0) { + for (; *ub==0;) ub--; /* drop zeros */ + num.exponent+=(Int)(num.lsd-ub); /* and adjust exponent */ + num.lsd=ub; + } + } /* adjustment needed */ + + #if DIVCOUNT + if (divcount>maxcount) { /* new high-water nark */ + maxcount=divcount; + printf("DivNewMaxCount: %ld\n", (LI)maxcount); + } + #endif + + if (op&DIVIDE) return decFinalize(result, &num, set); /* all done */ + + /* Is DIVIDEINT or a remainder; there is more to do -- first form */ + /* the integer (this is done 'after the fact', unlike as in */ + /* decNumber, so as not to tax DIVIDE) */ + + /* The first non-zero digit will be in the first 9 digits, known */ + /* from quodigits and num.msd, so there is always space for DECPMAX */ + /* digits */ + + length=(Int)(num.lsd-num.msd+1); + /*printf("Length exp: %ld %ld\n", (LI)length, (LI)num.exponent); */ + + if (length+num.exponent>DECPMAX) { /* cannot fit */ + decFloatZero(result); + DFWORD(result, 0)=DECFLOAT_qNaN; + set->status|=DEC_Division_impossible; + return result; + } + + if (num.exponent>=0) { /* already an int, or need pad zeros */ + for (ub=num.lsd+1; ub<=num.lsd+num.exponent; ub++) *ub=0; + num.lsd+=num.exponent; + } + else { /* too long: round or truncate needed */ + Int drop=-num.exponent; + if (!(op&REMNEAR)) { /* simple truncate */ + num.lsd-=drop; + if (num.lsd<num.msd) { /* truncated all */ + num.lsd=num.msd; /* make 0 */ + *num.lsd=0; /* .. [sign still relevant] */ + } + } + else { /* round to nearest even [sigh] */ + /* round-to-nearest, in-place; msd is at or to right of bcdacc+1 */ + /* (this is a special case of Quantize -- q.v. for commentary) */ + uByte *roundat; /* -> re-round digit */ + uByte reround; /* reround value */ + *(num.msd-1)=0; /* in case of left carry, or make 0 */ + if (drop<length) roundat=num.lsd-drop+1; + else if (drop==length) roundat=num.msd; + else roundat=num.msd-1; /* [-> 0] */ + reround=*roundat; + for (ub=roundat+1; ub<=num.lsd; ub++) { + if (*ub!=0) { + reround=DECSTICKYTAB[reround]; + break; + } + } /* check stickies */ + if (roundat>num.msd) num.lsd=roundat-1; + else { + num.msd--; /* use the 0 .. */ + num.lsd=num.msd; /* .. at the new MSD place */ + } + if (reround!=0) { /* discarding non-zero */ + uInt bump=0; + /* rounding is DEC_ROUND_HALF_EVEN always */ + if (reround>5) bump=1; /* >0.5 goes up */ + else if (reround==5) /* exactly 0.5000 .. */ + bump=*(num.lsd) & 0x01; /* .. up iff [new] lsd is odd */ + if (bump!=0) { /* need increment */ + /* increment the coefficient; this might end up with 1000... */ + ub=num.lsd; + for (; UINTAT(ub-3)==0x09090909; ub-=4) UINTAT(ub-3)=0; + for (; *ub==9; ub--) *ub=0; /* at most 3 more */ + *ub+=1; + if (ub<num.msd) num.msd--; /* carried */ + } /* bump needed */ + } /* reround!=0 */ + } /* remnear */ + } /* round or truncate needed */ + num.exponent=0; /* all paths */ + /*decShowNum(&num, "int"); */ + + if (op&DIVIDEINT) return decFinalize(result, &num, set); /* all done */ + + /* Have a remainder to calculate */ + decFinalize("ient, &num, set); /* lay out the integer so far */ + DFWORD("ient, 0)^=DECFLOAT_Sign; /* negate it */ + sign=DFWORD(dfl, 0); /* save sign of dfl */ + decFloatFMA(result, "ient, dfr, dfl, set); + if (!DFISZERO(result)) return result; + /* if the result is zero the sign shall be sign of dfl */ + DFWORD("ient, 0)=sign; /* construct decFloat of sign */ + return decFloatCopySign(result, result, "ient); + } /* decDivide */ + +/* ------------------------------------------------------------------ */ +/* decFiniteMultiply -- multiply two finite decFloats */ +/* */ +/* num gets the result of multiplying dfl and dfr */ +/* bcdacc .. with the coefficient in this array */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* */ +/* This effects the multiplication of two decFloats, both known to be */ +/* finite, leaving the result in a bcdnum ready for decFinalize (for */ +/* use in Multiply) or in a following addition (FMA). */ +/* */ +/* bcdacc must have space for at least DECPMAX9*18+1 bytes. */ +/* No error is possible and no status is set. */ +/* ------------------------------------------------------------------ */ +/* This routine has two separate implementations of the core */ +/* multiplication; both using base-billion. One uses only 32-bit */ +/* variables (Ints and uInts) or smaller; the other uses uLongs (for */ +/* multiplication and addition only). Both implementations cover */ +/* both arithmetic sizes (DOUBLE and QUAD) in order to allow timing */ +/* comparisons. In any one compilation only one implementation for */ +/* each size can be used, and if DECUSE64 is 0 then use of the 32-bit */ +/* version is forced. */ +/* */ +/* Historical note: an earlier version of this code also supported the */ +/* 256-bit format and has been preserved. That is somewhat trickier */ +/* during lazy carry splitting because the initial quotient estimate */ +/* (est) can exceed 32 bits. */ + +#define MULTBASE BILLION /* the base used for multiply */ +#define MULOPLEN DECPMAX9 /* operand length ('digits' base 10**9) */ +#define MULACCLEN (MULOPLEN*2) /* accumulator length (ditto) */ +#define LEADZEROS (MULACCLEN*9 - DECPMAX*2) /* leading zeros always */ + +/* Assertions: exponent not too large and MULACCLEN is a multiple of 4 */ +#if DECEMAXD>9 + #error Exponent may overflow when doubled for Multiply +#endif +#if MULACCLEN!=(MULACCLEN/4)*4 + /* This assumption is used below only for initialization */ + #error MULACCLEN is not a multiple of 4 +#endif + +static void decFiniteMultiply(bcdnum *num, uByte *bcdacc, + const decFloat *dfl, const decFloat *dfr) { + uInt bufl[MULOPLEN]; /* left coefficient (base-billion) */ + uInt bufr[MULOPLEN]; /* right coefficient (base-billion) */ + uInt *ui, *uj; /* work */ + uByte *ub; /* .. */ + + #if DECUSE64 + uLong accl[MULACCLEN]; /* lazy accumulator (base-billion+) */ + uLong *pl; /* work -> lazy accumulator */ + uInt acc[MULACCLEN]; /* coefficent in base-billion .. */ + #else + uInt acc[MULACCLEN*2]; /* accumulator in base-billion .. */ + #endif + uInt *pa; /* work -> accumulator */ + /*printf("Base10**9: OpLen=%d MulAcclen=%d\n", OPLEN, MULACCLEN); */ + + /* Calculate sign and exponent */ + num->sign=(DFWORD(dfl, 0)^DFWORD(dfr, 0)) & DECFLOAT_Sign; + num->exponent=GETEXPUN(dfl)+GETEXPUN(dfr); /* [see assertion above] */ + + /* Extract the coefficients and prepare the accumulator */ + /* the coefficients of the operands are decoded into base-billion */ + /* numbers in uInt arrays (bufl and bufr, LSD at offset 0) of the */ + /* appropriate size. */ + GETCOEFFBILL(dfl, bufl); + GETCOEFFBILL(dfr, bufr); + #if DECTRACE && 0 + printf("CoeffbL:"); + for (ui=bufl+MULOPLEN-1; ui>=bufl; ui--) printf(" %08lx", (LI)*ui); + printf("\n"); + printf("CoeffbR:"); + for (uj=bufr+MULOPLEN-1; uj>=bufr; uj--) printf(" %08lx", (LI)*uj); + printf("\n"); + #endif + + /* start the 64-bit/32-bit differing paths... */ +#if DECUSE64 + + /* zero the accumulator */ + #if MULACCLEN==4 + accl[0]=0; accl[1]=0; accl[2]=0; accl[3]=0; + #else /* use a loop */ + /* MULACCLEN is a multiple of four, asserted above */ + for (pl=accl; pl<accl+MULACCLEN; pl+=4) { + *pl=0; *(pl+1)=0; *(pl+2)=0; *(pl+3)=0;/* [reduce overhead] */ + } /* pl */ + #endif + + /* Effect the multiplication */ + /* The multiplcation proceeds using MFC's lazy-carry resolution */ + /* algorithm from decNumber. First, the multiplication is */ + /* effected, allowing accumulation of the partial products (which */ + /* are in base-billion at each column position) into 64 bits */ + /* without resolving back to base=billion after each addition. */ + /* These 64-bit numbers (which may contain up to 19 decimal digits) */ + /* are then split using the Clark & Cowlishaw algorithm (see below). */ + /* [Testing for 0 in the inner loop is not really a 'win'] */ + for (ui=bufr; ui<bufr+MULOPLEN; ui++) { /* over each item in rhs */ + if (*ui==0) continue; /* product cannot affect result */ + pl=accl+(ui-bufr); /* where to add the lhs */ + for (uj=bufl; uj<bufl+MULOPLEN; uj++, pl++) { /* over each item in lhs */ + /* if (*uj==0) continue; // product cannot affect result */ + *pl+=((uLong)*ui)*(*uj); + } /* uj */ + } /* ui */ + + /* The 64-bit carries must now be resolved; this means that a */ + /* quotient/remainder has to be calculated for base-billion (1E+9). */ + /* For this, Clark & Cowlishaw's quotient estimation approach (also */ + /* used in decNumber) is needed, because 64-bit divide is generally */ + /* extremely slow on 32-bit machines, and may be slower than this */ + /* approach even on 64-bit machines. This algorithm splits X */ + /* using: */ + /* */ + /* magic=2**(A+B)/1E+9; // 'magic number' */ + /* hop=X/2**A; // high order part of X (by shift) */ + /* est=magic*hop/2**B // quotient estimate (may be low by 1) */ + /* */ + /* A and B are quite constrained; hop and magic must fit in 32 bits, */ + /* and 2**(A+B) must be as large as possible (which is 2**61 if */ + /* magic is to fit). Further, maxX increases with the length of */ + /* the operands (and hence the number of partial products */ + /* accumulated); maxX is OPLEN*(10**18), which is up to 19 digits. */ + /* */ + /* It can be shown that when OPLEN is 2 then the maximum error in */ + /* the estimated quotient is <1, but for larger maximum x the */ + /* maximum error is above 1 so a correction that is >1 may be */ + /* needed. Values of A and B are chosen to satisfy the constraints */ + /* just mentioned while minimizing the maximum error (and hence the */ + /* maximum correction), as shown in the following table: */ + /* */ + /* Type OPLEN A B maxX maxError maxCorrection */ + /* --------------------------------------------------------- */ + /* DOUBLE 2 29 32 <2*10**18 0.63 1 */ + /* QUAD 4 30 31 <4*10**18 1.17 2 */ + /* */ + /* In the OPLEN==2 case there is most choice, but the value for B */ + /* of 32 has a big advantage as then the calculation of the */ + /* estimate requires no shifting; the compiler can extract the high */ + /* word directly after multiplying magic*hop. */ + #define MULMAGIC 2305843009U /* 2**61/10**9 [both cases] */ + #if DOUBLE + #define MULSHIFTA 29 + #define MULSHIFTB 32 + #elif QUAD + #define MULSHIFTA 30 + #define MULSHIFTB 31 + #else + #error Unexpected type + #endif + + #if DECTRACE + printf("MulAccl:"); + for (pl=accl+MULACCLEN-1; pl>=accl; pl--) + printf(" %08lx:%08lx", (LI)(*pl>>32), (LI)(*pl&0xffffffff)); + printf("\n"); + #endif + + for (pl=accl, pa=acc; pl<accl+MULACCLEN; pl++, pa++) { /* each column position */ + uInt lo, hop; /* work */ + uInt est; /* cannot exceed 4E+9 */ + if (*pl>MULTBASE) { + /* *pl holds a binary number which needs to be split */ + hop=(uInt)(*pl>>MULSHIFTA); + est=(uInt)(((uLong)hop*MULMAGIC)>>MULSHIFTB); + /* the estimate is now in est; now calculate hi:lo-est*10**9; */ + /* happily the top word of the result is irrelevant because it */ + /* will always be zero so this needs only one multiplication */ + lo=(uInt)(*pl-((uLong)est*MULTBASE)); /* low word of result */ + /* If QUAD, the correction here could be +2 */ + if (lo>=MULTBASE) { + lo-=MULTBASE; /* correct by +1 */ + est++; + #if QUAD + /* may need to correct by +2 */ + if (lo>=MULTBASE) { + lo-=MULTBASE; + est++; + } + #endif + } + /* finally place lo as the new coefficient 'digit' and add est to */ + /* the next place up [this is safe because this path is never */ + /* taken on the final iteration as *pl will fit] */ + *pa=lo; + *(pl+1)+=est; + } /* *pl needed split */ + else { /* *pl<MULTBASE */ + *pa=(uInt)*pl; /* just copy across */ + } + } /* pl loop */ + +#else /* 32-bit */ + for (pa=acc;; pa+=4) { /* zero the accumulator */ + *pa=0; *(pa+1)=0; *(pa+2)=0; *(pa+3)=0; /* [reduce overhead] */ + if (pa==acc+MULACCLEN*2-4) break; /* multiple of 4 asserted */ + } /* pa */ + + /* Effect the multiplication */ + /* uLongs are not available (and in particular, there is no uLong */ + /* divide) but it is still possible to use MFC's lazy-carry */ + /* resolution algorithm from decNumber. First, the multiplication */ + /* is effected, allowing accumulation of the partial products */ + /* (which are in base-billion at each column position) into 64 bits */ + /* [with the high-order 32 bits in each position being held at */ + /* offset +ACCLEN from the low-order 32 bits in the accumulator]. */ + /* These 64-bit numbers (which may contain up to 19 decimal digits) */ + /* are then split using the Clark & Cowlishaw algorithm (see */ + /* below). */ + for (ui=bufr;; ui++) { /* over each item in rhs */ + uInt hi, lo; /* words of exact multiply result */ + pa=acc+(ui-bufr); /* where to add the lhs */ + for (uj=bufl;; uj++, pa++) { /* over each item in lhs */ + LONGMUL32HI(hi, *ui, *uj); /* calculate product of digits */ + lo=(*ui)*(*uj); /* .. */ + *pa+=lo; /* accumulate low bits and .. */ + *(pa+MULACCLEN)+=hi+(*pa<lo); /* .. high bits with any carry */ + if (uj==bufl+MULOPLEN-1) break; + } + if (ui==bufr+MULOPLEN-1) break; + } + + /* The 64-bit carries must now be resolved; this means that a */ + /* quotient/remainder has to be calculated for base-billion (1E+9). */ + /* For this, Clark & Cowlishaw's quotient estimation approach (also */ + /* used in decNumber) is needed, because 64-bit divide is generally */ + /* extremely slow on 32-bit machines. This algorithm splits X */ + /* using: */ + /* */ + /* magic=2**(A+B)/1E+9; // 'magic number' */ + /* hop=X/2**A; // high order part of X (by shift) */ + /* est=magic*hop/2**B // quotient estimate (may be low by 1) */ + /* */ + /* A and B are quite constrained; hop and magic must fit in 32 bits, */ + /* and 2**(A+B) must be as large as possible (which is 2**61 if */ + /* magic is to fit). Further, maxX increases with the length of */ + /* the operands (and hence the number of partial products */ + /* accumulated); maxX is OPLEN*(10**18), which is up to 19 digits. */ + /* */ + /* It can be shown that when OPLEN is 2 then the maximum error in */ + /* the estimated quotient is <1, but for larger maximum x the */ + /* maximum error is above 1 so a correction that is >1 may be */ + /* needed. Values of A and B are chosen to satisfy the constraints */ + /* just mentioned while minimizing the maximum error (and hence the */ + /* maximum correction), as shown in the following table: */ + /* */ + /* Type OPLEN A B maxX maxError maxCorrection */ + /* --------------------------------------------------------- */ + /* DOUBLE 2 29 32 <2*10**18 0.63 1 */ + /* QUAD 4 30 31 <4*10**18 1.17 2 */ + /* */ + /* In the OPLEN==2 case there is most choice, but the value for B */ + /* of 32 has a big advantage as then the calculation of the */ + /* estimate requires no shifting; the high word is simply */ + /* calculated from multiplying magic*hop. */ + #define MULMAGIC 2305843009U /* 2**61/10**9 [both cases] */ + #if DOUBLE + #define MULSHIFTA 29 + #define MULSHIFTB 32 + #elif QUAD + #define MULSHIFTA 30 + #define MULSHIFTB 31 + #else + #error Unexpected type + #endif + + #if DECTRACE + printf("MulHiLo:"); + for (pa=acc+MULACCLEN-1; pa>=acc; pa--) + printf(" %08lx:%08lx", (LI)*(pa+MULACCLEN), (LI)*pa); + printf("\n"); + #endif + + for (pa=acc;; pa++) { /* each low uInt */ + uInt hi, lo; /* words of exact multiply result */ + uInt hop, estlo; /* work */ + #if QUAD + uInt esthi; /* .. */ + #endif + + lo=*pa; + hi=*(pa+MULACCLEN); /* top 32 bits */ + /* hi and lo now hold a binary number which needs to be split */ + + #if DOUBLE + hop=(hi<<3)+(lo>>MULSHIFTA); /* hi:lo/2**29 */ + LONGMUL32HI(estlo, hop, MULMAGIC);/* only need the high word */ + /* [MULSHIFTB is 32, so estlo can be used directly] */ + /* the estimate is now in estlo; now calculate hi:lo-est*10**9; */ + /* happily the top word of the result is irrelevant because it */ + /* will always be zero so this needs only one multiplication */ + lo-=(estlo*MULTBASE); + /* esthi=0; // high word is ignored below */ + /* the correction here will be at most +1; do it */ + if (lo>=MULTBASE) { + lo-=MULTBASE; + estlo++; + } + #elif QUAD + hop=(hi<<2)+(lo>>MULSHIFTA); /* hi:lo/2**30 */ + LONGMUL32HI(esthi, hop, MULMAGIC);/* shift will be 31 .. */ + estlo=hop*MULMAGIC; /* .. so low word needed */ + estlo=(esthi<<1)+(estlo>>MULSHIFTB); /* [just the top bit] */ + /* esthi=0; // high word is ignored below */ + lo-=(estlo*MULTBASE); /* as above */ + /* the correction here could be +1 or +2 */ + if (lo>=MULTBASE) { + lo-=MULTBASE; + estlo++; + } + if (lo>=MULTBASE) { + lo-=MULTBASE; + estlo++; + } + #else + #error Unexpected type + #endif + + /* finally place lo as the new accumulator digit and add est to */ + /* the next place up; this latter add could cause a carry of 1 */ + /* to the high word of the next place */ + *pa=lo; + *(pa+1)+=estlo; + /* esthi is always 0 for DOUBLE and QUAD so this is skipped */ + /* *(pa+1+MULACCLEN)+=esthi; */ + if (*(pa+1)<estlo) *(pa+1+MULACCLEN)+=1; /* carry */ + if (pa==acc+MULACCLEN-2) break; /* [MULACCLEN-1 will never need split] */ + } /* pa loop */ +#endif + + /* At this point, whether using the 64-bit or the 32-bit paths, the */ + /* accumulator now holds the (unrounded) result in base-billion; */ + /* one base-billion 'digit' per uInt. */ + #if DECTRACE + printf("MultAcc:"); + for (pa=acc+MULACCLEN-1; pa>=acc; pa--) printf(" %09ld", (LI)*pa); + printf("\n"); + #endif + + /* Now convert to BCD for rounding and cleanup, starting from the */ + /* most significant end */ + pa=acc+MULACCLEN-1; + if (*pa!=0) num->msd=bcdacc+LEADZEROS;/* drop known lead zeros */ + else { /* >=1 word of leading zeros */ + num->msd=bcdacc; /* known leading zeros are gone */ + pa--; /* skip first word .. */ + for (; *pa==0; pa--) if (pa==acc) break; /* .. and any more leading 0s */ + } + for (ub=bcdacc;; pa--, ub+=9) { + if (*pa!=0) { /* split(s) needed */ + uInt top, mid, rem; /* work */ + /* *pa is non-zero -- split the base-billion acc digit into */ + /* hi, mid, and low three-digits */ + #define mulsplit9 1000000 /* divisor */ + #define mulsplit6 1000 /* divisor */ + /* The splitting is done by simple divides and remainders, */ + /* assuming the compiler will optimize these where useful */ + /* [GCC does] */ + top=*pa/mulsplit9; + rem=*pa%mulsplit9; + mid=rem/mulsplit6; + rem=rem%mulsplit6; + /* lay out the nine BCD digits (plus one unwanted byte) */ + UINTAT(ub) =UINTAT(&BIN2BCD8[top*4]); + UINTAT(ub+3)=UINTAT(&BIN2BCD8[mid*4]); + UINTAT(ub+6)=UINTAT(&BIN2BCD8[rem*4]); + } + else { /* *pa==0 */ + UINTAT(ub)=0; /* clear 9 BCD8s */ + UINTAT(ub+4)=0; /* .. */ + *(ub+8)=0; /* .. */ + } + if (pa==acc) break; + } /* BCD conversion loop */ + + num->lsd=ub+8; /* complete the bcdnum .. */ + + #if DECTRACE + decShowNum(num, "postmult"); + decFloatShow(dfl, "dfl"); + decFloatShow(dfr, "dfr"); + #endif + return; + } /* decFiniteMultiply */ + +/* ------------------------------------------------------------------ */ +/* decFloatAbs -- absolute value, heeding NaNs, etc. */ +/* */ +/* result gets the canonicalized df with sign 0 */ +/* df is the decFloat to abs */ +/* set is the context */ +/* returns result */ +/* */ +/* This has the same effect as decFloatPlus unless df is negative, */ +/* in which case it has the same effect as decFloatMinus. The */ +/* effect is also the same as decFloatCopyAbs except that NaNs are */ +/* handled normally (the sign of a NaN is not affected, and an sNaN */ +/* will signal) and the result will be canonical. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatAbs(decFloat *result, const decFloat *df, + decContext *set) { + if (DFISNAN(df)) return decNaNs(result, df, NULL, set); + decCanonical(result, df); /* copy and check */ + DFBYTE(result, 0)&=~0x80; /* zero sign bit */ + return result; + } /* decFloatAbs */ + +/* ------------------------------------------------------------------ */ +/* decFloatAdd -- add two decFloats */ +/* */ +/* result gets the result of adding dfl and dfr: */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* set is the context */ +/* returns result */ +/* */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatAdd(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + bcdnum num; /* for final conversion */ + Int expl, expr; /* left and right exponents */ + uInt *ui, *uj; /* work */ + uByte *ub; /* .. */ + + uInt sourhil, sourhir; /* top words from source decFloats */ + /* [valid only until specials */ + /* handled or exponents decoded] */ + uInt diffsign; /* non-zero if signs differ */ + uInt carry; /* carry: 0 or 1 before add loop */ + Int overlap; /* coefficient overlap (if full) */ + /* the following buffers hold coefficients with various alignments */ + /* (see commentary and diagrams below) */ + uByte acc[4+2+DECPMAX*3+8]; + uByte buf[4+2+DECPMAX*2]; + uByte *umsd, *ulsd; /* local MSD and LSD pointers */ + + #if DECLITEND + #define CARRYPAT 0x01000000 /* carry=1 pattern */ + #else + #define CARRYPAT 0x00000001 /* carry=1 pattern */ + #endif + + /* Start decoding the arguments */ + /* the initial exponents are placed into the opposite Ints to */ + /* that which might be expected; there are two sets of data to */ + /* keep track of (each decFloat and the corresponding exponent), */ + /* and this scheme means that at the swap point (after comparing */ + /* exponents) only one pair of words needs to be swapped */ + /* whichever path is taken (thereby minimising worst-case path) */ + sourhil=DFWORD(dfl, 0); /* LHS top word */ + expr=DECCOMBEXP[sourhil>>26]; /* get exponent high bits (in place) */ + sourhir=DFWORD(dfr, 0); /* RHS top word */ + expl=DECCOMBEXP[sourhir>>26]; + + diffsign=(sourhil^sourhir)&DECFLOAT_Sign; + + if (EXPISSPECIAL(expl | expr)) { /* either is special? */ + if (DFISNAN(dfl) || DFISNAN(dfr)) return decNaNs(result, dfl, dfr, set); + /* one or two infinities */ + /* two infinities with different signs is invalid */ + if (diffsign && DFISINF(dfl) && DFISINF(dfr)) + return decInvalid(result, set); + if (DFISINF(dfl)) return decInfinity(result, dfl); /* LHS is infinite */ + return decInfinity(result, dfr); /* RHS must be Infinite */ + } + + /* Here when both arguments are finite */ + + /* complete exponent gathering (keeping swapped) */ + expr+=GETECON(dfl)-DECBIAS; /* .. + continuation and unbias */ + expl+=GETECON(dfr)-DECBIAS; + /* here expr has exponent from lhs, and vice versa */ + + /* now swap either exponents or argument pointers */ + if (expl<=expr) { + /* original left is bigger */ + Int expswap=expl; + expl=expr; + expr=expswap; + /* printf("left bigger\n"); */ + } + else { + const decFloat *dfswap=dfl; + dfl=dfr; + dfr=dfswap; + /* printf("right bigger\n"); */ + } + /* [here dfl and expl refer to the datum with the larger exponent, */ + /* of if the exponents are equal then the original LHS argument] */ + + /* if lhs is zero then result will be the rhs (now known to have */ + /* the smaller exponent), which also may need to be tested for zero */ + /* for the weird IEEE 754 sign rules */ + if (DFISZERO(dfl)) { + decCanonical(result, dfr); /* clean copy */ + /* "When the sum of two operands with opposite signs is */ + /* exactly zero, the sign of that sum shall be '+' in all */ + /* rounding modes except round toward -Infinity, in which */ + /* mode that sign shall be '-'." */ + if (diffsign && DFISZERO(result)) { + DFWORD(result, 0)&=~DECFLOAT_Sign; /* assume sign 0 */ + if (set->round==DEC_ROUND_FLOOR) DFWORD(result, 0)|=DECFLOAT_Sign; + } + return result; + } /* numfl is zero */ + /* [here, LHS is non-zero; code below assumes that] */ + + /* Coefficients layout during the calculations to follow: */ + /* */ + /* Overlap case: */ + /* +------------------------------------------------+ */ + /* acc: |0000| coeffa | tail B | | */ + /* +------------------------------------------------+ */ + /* buf: |0000| pad0s | coeffb | | */ + /* +------------------------------------------------+ */ + /* */ + /* Touching coefficients or gap: */ + /* +------------------------------------------------+ */ + /* acc: |0000| coeffa | gap | coeffb | */ + /* +------------------------------------------------+ */ + /* [buf not used or needed; gap clamped to Pmax] */ + + /* lay out lhs coefficient into accumulator; this starts at acc+4 */ + /* for decDouble or acc+6 for decQuad so the LSD is word- */ + /* aligned; the top word gap is there only in case a carry digit */ + /* is prefixed after the add -- it does not need to be zeroed */ + #if DOUBLE + #define COFF 4 /* offset into acc */ + #elif QUAD + USHORTAT(acc+4)=0; /* prefix 00 */ + #define COFF 6 /* offset into acc */ + #endif + + GETCOEFF(dfl, acc+COFF); /* decode from decFloat */ + ulsd=acc+COFF+DECPMAX-1; + umsd=acc+4; /* [having this here avoids */ + /* weird GCC optimizer failure] */ + #if DECTRACE + {bcdnum tum; + tum.msd=umsd; + tum.lsd=ulsd; + tum.exponent=expl; + tum.sign=DFWORD(dfl, 0) & DECFLOAT_Sign; + decShowNum(&tum, "dflx");} + #endif + + /* if signs differ, take ten's complement of lhs (here the */ + /* coefficient is subtracted from all-nines; the 1 is added during */ + /* the later add cycle -- zeros to the right do not matter because */ + /* the complement of zero is zero); these are fixed-length inverts */ + /* where the lsd is known to be at a 4-byte boundary (so no borrow */ + /* possible) */ + carry=0; /* assume no carry */ + if (diffsign) { + carry=CARRYPAT; /* for +1 during add */ + UINTAT(acc+ 4)=0x09090909-UINTAT(acc+ 4); + UINTAT(acc+ 8)=0x09090909-UINTAT(acc+ 8); + UINTAT(acc+12)=0x09090909-UINTAT(acc+12); + UINTAT(acc+16)=0x09090909-UINTAT(acc+16); + #if QUAD + UINTAT(acc+20)=0x09090909-UINTAT(acc+20); + UINTAT(acc+24)=0x09090909-UINTAT(acc+24); + UINTAT(acc+28)=0x09090909-UINTAT(acc+28); + UINTAT(acc+32)=0x09090909-UINTAT(acc+32); + UINTAT(acc+36)=0x09090909-UINTAT(acc+36); + #endif + } /* diffsign */ + + /* now process the rhs coefficient; if it cannot overlap lhs then */ + /* it can be put straight into acc (with an appropriate gap, if */ + /* needed) because no actual addition will be needed (except */ + /* possibly to complete ten's complement) */ + overlap=DECPMAX-(expl-expr); + #if DECTRACE + printf("exps: %ld %ld\n", (LI)expl, (LI)expr); + printf("Overlap=%ld carry=%08lx\n", (LI)overlap, (LI)carry); + #endif + + if (overlap<=0) { /* no overlap possible */ + uInt gap; /* local work */ + /* since a full addition is not needed, a ten's complement */ + /* calculation started above may need to be completed */ + if (carry) { + for (ub=ulsd; *ub==9; ub--) *ub=0; + *ub+=1; + carry=0; /* taken care of */ + } + /* up to DECPMAX-1 digits of the final result can extend down */ + /* below the LSD of the lhs, so if the gap is >DECPMAX then the */ + /* rhs will be simply sticky bits. In this case the gap is */ + /* clamped to DECPMAX and the exponent adjusted to suit [this is */ + /* safe because the lhs is non-zero]. */ + gap=-overlap; + if (gap>DECPMAX) { + expr+=gap-1; + gap=DECPMAX; + } + ub=ulsd+gap+1; /* where MSD will go */ + /* Fill the gap with 0s; note that there is no addition to do */ + ui=&UINTAT(acc+COFF+DECPMAX); /* start of gap */ + for (; ui<&UINTAT(ub); ui++) *ui=0; /* mind the gap */ + if (overlap<-DECPMAX) { /* gap was > DECPMAX */ + *ub=(uByte)(!DFISZERO(dfr)); /* make sticky digit */ + } + else { /* need full coefficient */ + GETCOEFF(dfr, ub); /* decode from decFloat */ + ub+=DECPMAX-1; /* new LSD... */ + } + ulsd=ub; /* save new LSD */ + } /* no overlap possible */ + + else { /* overlap>0 */ + /* coefficients overlap (perhaps completely, although also */ + /* perhaps only where zeros) */ + ub=buf+COFF+DECPMAX-overlap; /* where MSD will go */ + /* Fill the prefix gap with 0s; 8 will cover most common */ + /* unalignments, so start with direct assignments (a loop is */ + /* then used for any remaining -- the loop (and the one in a */ + /* moment) is not then on the critical path because the number */ + /* of additions is reduced by (at least) two in this case) */ + UINTAT(buf+4)=0; /* [clears decQuad 00 too] */ + UINTAT(buf+8)=0; + if (ub>buf+12) { + ui=&UINTAT(buf+12); /* start of any remaining */ + for (; ui<&UINTAT(ub); ui++) *ui=0; /* fill them */ + } + GETCOEFF(dfr, ub); /* decode from decFloat */ + + /* now move tail of rhs across to main acc; again use direct */ + /* assignment for 8 digits-worth */ + UINTAT(acc+COFF+DECPMAX)=UINTAT(buf+COFF+DECPMAX); + UINTAT(acc+COFF+DECPMAX+4)=UINTAT(buf+COFF+DECPMAX+4); + if (buf+COFF+DECPMAX+8<ub+DECPMAX) { + uj=&UINTAT(buf+COFF+DECPMAX+8); /* source */ + ui=&UINTAT(acc+COFF+DECPMAX+8); /* target */ + for (; uj<&UINTAT(ub+DECPMAX); ui++, uj++) *ui=*uj; + } + + ulsd=acc+(ub-buf+DECPMAX-1); /* update LSD pointer */ + + /* now do the add of the non-tail; this is all nicely aligned, */ + /* and is over a multiple of four digits (because for Quad two */ + /* two 0 digits were added on the left); words in both acc and */ + /* buf (buf especially) will often be zero */ + /* [byte-by-byte add, here, is about 15% slower than the by-fours] */ + + /* Now effect the add; this is harder on a little-endian */ + /* machine as the inter-digit carry cannot use the usual BCD */ + /* addition trick because the bytes are loaded in the wrong order */ + /* [this loop could be unrolled, but probably scarcely worth it] */ + + ui=&UINTAT(acc+COFF+DECPMAX-4); /* target LSW (acc) */ + uj=&UINTAT(buf+COFF+DECPMAX-4); /* source LSW (buf, to add to acc) */ + + #if !DECLITEND + for (; ui>=&UINTAT(acc+4); ui--, uj--) { + /* bcd8 add */ + carry+=*uj; /* rhs + carry */ + if (carry==0) continue; /* no-op */ + carry+=*ui; /* lhs */ + /* Big-endian BCD adjust (uses internal carry) */ + carry+=0x76f6f6f6; /* note top nibble not all bits */ + *ui=(carry & 0x0f0f0f0f) - ((carry & 0x60606060)>>4); /* BCD adjust */ + carry>>=31; /* true carry was at far left */ + } /* add loop */ + #else + for (; ui>=&UINTAT(acc+4); ui--, uj--) { + /* bcd8 add */ + carry+=*uj; /* rhs + carry */ + if (carry==0) continue; /* no-op [common if unaligned] */ + carry+=*ui; /* lhs */ + /* Little-endian BCD adjust; inter-digit carry must be manual */ + /* because the lsb from the array will be in the most-significant */ + /* byte of carry */ + carry+=0x76767676; /* note no inter-byte carries */ + carry+=(carry & 0x80000000)>>15; + carry+=(carry & 0x00800000)>>15; + carry+=(carry & 0x00008000)>>15; + carry-=(carry & 0x60606060)>>4; /* BCD adjust back */ + *ui=carry & 0x0f0f0f0f; /* clear debris and save */ + /* here, final carry-out bit is at 0x00000080; move it ready */ + /* for next word-add (i.e., to 0x01000000) */ + carry=(carry & 0x00000080)<<17; + } /* add loop */ + #endif + #if DECTRACE + {bcdnum tum; + printf("Add done, carry=%08lx, diffsign=%ld\n", (LI)carry, (LI)diffsign); + tum.msd=umsd; /* acc+4; */ + tum.lsd=ulsd; + tum.exponent=0; + tum.sign=0; + decShowNum(&tum, "dfadd");} + #endif + } /* overlap possible */ + + /* ordering here is a little strange in order to have slowest path */ + /* first in GCC asm listing */ + if (diffsign) { /* subtraction */ + if (!carry) { /* no carry out means RHS<LHS */ + /* borrowed -- take ten's complement */ + /* sign is lhs sign */ + num.sign=DFWORD(dfl, 0) & DECFLOAT_Sign; + + /* invert the coefficient first by fours, then add one; space */ + /* at the end of the buffer ensures the by-fours is always */ + /* safe, but lsd+1 must be cleared to prevent a borrow */ + /* if big-endian */ + #if !DECLITEND + *(ulsd+1)=0; + #endif + /* there are always at least four coefficient words */ + UINTAT(umsd) =0x09090909-UINTAT(umsd); + UINTAT(umsd+4) =0x09090909-UINTAT(umsd+4); + UINTAT(umsd+8) =0x09090909-UINTAT(umsd+8); + UINTAT(umsd+12)=0x09090909-UINTAT(umsd+12); + #if DOUBLE + #define BNEXT 16 + #elif QUAD + UINTAT(umsd+16)=0x09090909-UINTAT(umsd+16); + UINTAT(umsd+20)=0x09090909-UINTAT(umsd+20); + UINTAT(umsd+24)=0x09090909-UINTAT(umsd+24); + UINTAT(umsd+28)=0x09090909-UINTAT(umsd+28); + UINTAT(umsd+32)=0x09090909-UINTAT(umsd+32); + #define BNEXT 36 + #endif + if (ulsd>=umsd+BNEXT) { /* unaligned */ + /* eight will handle most unaligments for Double; 16 for Quad */ + UINTAT(umsd+BNEXT)=0x09090909-UINTAT(umsd+BNEXT); + UINTAT(umsd+BNEXT+4)=0x09090909-UINTAT(umsd+BNEXT+4); + #if DOUBLE + #define BNEXTY (BNEXT+8) + #elif QUAD + UINTAT(umsd+BNEXT+8)=0x09090909-UINTAT(umsd+BNEXT+8); + UINTAT(umsd+BNEXT+12)=0x09090909-UINTAT(umsd+BNEXT+12); + #define BNEXTY (BNEXT+16) + #endif + if (ulsd>=umsd+BNEXTY) { /* very unaligned */ + ui=&UINTAT(umsd+BNEXTY); /* -> continue */ + for (;;ui++) { + *ui=0x09090909-*ui; /* invert four digits */ + if (ui>=&UINTAT(ulsd-3)) break; /* all done */ + } + } + } + /* complete the ten's complement by adding 1 */ + for (ub=ulsd; *ub==9; ub--) *ub=0; + *ub+=1; + } /* borrowed */ + + else { /* carry out means RHS>=LHS */ + num.sign=DFWORD(dfr, 0) & DECFLOAT_Sign; + /* all done except for the special IEEE 754 exact-zero-result */ + /* rule (see above); while testing for zero, strip leading */ + /* zeros (which will save decFinalize doing it) (this is in */ + /* diffsign path, so carry impossible and true umsd is */ + /* acc+COFF) */ + + /* Check the initial coefficient area using the fast macro; */ + /* this will often be all that needs to be done (as on the */ + /* worst-case path when the subtraction was aligned and */ + /* full-length) */ + if (ISCOEFFZERO(acc+COFF)) { + umsd=acc+COFF+DECPMAX-1; /* so far, so zero */ + if (ulsd>umsd) { /* more to check */ + umsd++; /* to align after checked area */ + for (; UINTAT(umsd)==0 && umsd+3<ulsd;) umsd+=4; + for (; *umsd==0 && umsd<ulsd;) umsd++; + } + if (*umsd==0) { /* must be true zero (and diffsign) */ + num.sign=0; /* assume + */ + if (set->round==DEC_ROUND_FLOOR) num.sign=DECFLOAT_Sign; + } + } + /* [else was not zero, might still have leading zeros] */ + } /* subtraction gave positive result */ + } /* diffsign */ + + else { /* same-sign addition */ + num.sign=DFWORD(dfl, 0)&DECFLOAT_Sign; + #if DOUBLE + if (carry) { /* only possible with decDouble */ + *(acc+3)=1; /* [Quad has leading 00] */ + umsd=acc+3; + } + #endif + } /* same sign */ + + num.msd=umsd; /* set MSD .. */ + num.lsd=ulsd; /* .. and LSD */ + num.exponent=expr; /* set exponent to smaller */ + + #if DECTRACE + decFloatShow(dfl, "dfl"); + decFloatShow(dfr, "dfr"); + decShowNum(&num, "postadd"); + #endif + return decFinalize(result, &num, set); /* round, check, and lay out */ + } /* decFloatAdd */ + +/* ------------------------------------------------------------------ */ +/* decFloatAnd -- logical digitwise AND of two decFloats */ +/* */ +/* result gets the result of ANDing dfl and dfr */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* set is the context */ +/* returns result, which will be canonical with sign=0 */ +/* */ +/* The operands must be positive, finite with exponent q=0, and */ +/* comprise just zeros and ones; if not, Invalid operation results. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatAnd(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + if (!DFISUINT01(dfl) || !DFISUINT01(dfr) + || !DFISCC01(dfl) || !DFISCC01(dfr)) return decInvalid(result, set); + /* the operands are positive finite integers (q=0) with just 0s and 1s */ + #if DOUBLE + DFWORD(result, 0)=ZEROWORD + |((DFWORD(dfl, 0) & DFWORD(dfr, 0))&0x04009124); + DFWORD(result, 1)=(DFWORD(dfl, 1) & DFWORD(dfr, 1))&0x49124491; + #elif QUAD + DFWORD(result, 0)=ZEROWORD + |((DFWORD(dfl, 0) & DFWORD(dfr, 0))&0x04000912); + DFWORD(result, 1)=(DFWORD(dfl, 1) & DFWORD(dfr, 1))&0x44912449; + DFWORD(result, 2)=(DFWORD(dfl, 2) & DFWORD(dfr, 2))&0x12449124; + DFWORD(result, 3)=(DFWORD(dfl, 3) & DFWORD(dfr, 3))&0x49124491; + #endif + return result; + } /* decFloatAnd */ + +/* ------------------------------------------------------------------ */ +/* decFloatCanonical -- copy a decFloat, making canonical */ +/* */ +/* result gets the canonicalized df */ +/* df is the decFloat to copy and make canonical */ +/* returns result */ +/* */ +/* This works on specials, too; no error or exception is possible. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatCanonical(decFloat *result, const decFloat *df) { + return decCanonical(result, df); + } /* decFloatCanonical */ + +/* ------------------------------------------------------------------ */ +/* decFloatClass -- return the class of a decFloat */ +/* */ +/* df is the decFloat to test */ +/* returns the decClass that df falls into */ +/* ------------------------------------------------------------------ */ +enum decClass decFloatClass(const decFloat *df) { + Int exp; /* exponent */ + if (DFISSPECIAL(df)) { + if (DFISQNAN(df)) return DEC_CLASS_QNAN; + if (DFISSNAN(df)) return DEC_CLASS_SNAN; + /* must be an infinity */ + if (DFISSIGNED(df)) return DEC_CLASS_NEG_INF; + return DEC_CLASS_POS_INF; + } + if (DFISZERO(df)) { /* quite common */ + if (DFISSIGNED(df)) return DEC_CLASS_NEG_ZERO; + return DEC_CLASS_POS_ZERO; + } + /* is finite and non-zero; similar code to decFloatIsNormal, here */ + /* [this could be speeded up slightly by in-lining decFloatDigits] */ + exp=GETEXPUN(df) /* get unbiased exponent .. */ + +decFloatDigits(df)-1; /* .. and make adjusted exponent */ + if (exp>=DECEMIN) { /* is normal */ + if (DFISSIGNED(df)) return DEC_CLASS_NEG_NORMAL; + return DEC_CLASS_POS_NORMAL; + } + /* is subnormal */ + if (DFISSIGNED(df)) return DEC_CLASS_NEG_SUBNORMAL; + return DEC_CLASS_POS_SUBNORMAL; + } /* decFloatClass */ + +/* ------------------------------------------------------------------ */ +/* decFloatClassString -- return the class of a decFloat as a string */ +/* */ +/* df is the decFloat to test */ +/* returns a constant string describing the class df falls into */ +/* ------------------------------------------------------------------ */ +const char *decFloatClassString(const decFloat *df) { + enum decClass eclass=decFloatClass(df); + if (eclass==DEC_CLASS_POS_NORMAL) return DEC_ClassString_PN; + if (eclass==DEC_CLASS_NEG_NORMAL) return DEC_ClassString_NN; + if (eclass==DEC_CLASS_POS_ZERO) return DEC_ClassString_PZ; + if (eclass==DEC_CLASS_NEG_ZERO) return DEC_ClassString_NZ; + if (eclass==DEC_CLASS_POS_SUBNORMAL) return DEC_ClassString_PS; + if (eclass==DEC_CLASS_NEG_SUBNORMAL) return DEC_ClassString_NS; + if (eclass==DEC_CLASS_POS_INF) return DEC_ClassString_PI; + if (eclass==DEC_CLASS_NEG_INF) return DEC_ClassString_NI; + if (eclass==DEC_CLASS_QNAN) return DEC_ClassString_QN; + if (eclass==DEC_CLASS_SNAN) return DEC_ClassString_SN; + return DEC_ClassString_UN; /* Unknown */ + } /* decFloatClassString */ + +/* ------------------------------------------------------------------ */ +/* decFloatCompare -- compare two decFloats; quiet NaNs allowed */ +/* */ +/* result gets the result of comparing dfl and dfr */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* set is the context */ +/* returns result, which may be -1, 0, 1, or NaN (Unordered) */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatCompare(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + Int comp; /* work */ + /* NaNs are handled as usual */ + if (DFISNAN(dfl) || DFISNAN(dfr)) return decNaNs(result, dfl, dfr, set); + /* numeric comparison needed */ + comp=decNumCompare(dfl, dfr, 0); + decFloatZero(result); + if (comp==0) return result; + DFBYTE(result, DECBYTES-1)=0x01; /* LSD=1 */ + if (comp<0) DFBYTE(result, 0)|=0x80; /* set sign bit */ + return result; + } /* decFloatCompare */ + +/* ------------------------------------------------------------------ */ +/* decFloatCompareSignal -- compare two decFloats; all NaNs signal */ +/* */ +/* result gets the result of comparing dfl and dfr */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* set is the context */ +/* returns result, which may be -1, 0, 1, or NaN (Unordered) */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatCompareSignal(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + Int comp; /* work */ + /* NaNs are handled as usual, except that all NaNs signal */ + if (DFISNAN(dfl) || DFISNAN(dfr)) { + set->status|=DEC_Invalid_operation; + return decNaNs(result, dfl, dfr, set); + } + /* numeric comparison needed */ + comp=decNumCompare(dfl, dfr, 0); + decFloatZero(result); + if (comp==0) return result; + DFBYTE(result, DECBYTES-1)=0x01; /* LSD=1 */ + if (comp<0) DFBYTE(result, 0)|=0x80; /* set sign bit */ + return result; + } /* decFloatCompareSignal */ + +/* ------------------------------------------------------------------ */ +/* decFloatCompareTotal -- compare two decFloats with total ordering */ +/* */ +/* result gets the result of comparing dfl and dfr */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* returns result, which may be -1, 0, or 1 */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatCompareTotal(decFloat *result, + const decFloat *dfl, const decFloat *dfr) { + Int comp; /* work */ + if (DFISNAN(dfl) || DFISNAN(dfr)) { + Int nanl, nanr; /* work */ + /* morph NaNs to +/- 1 or 2, leave numbers as 0 */ + nanl=DFISSNAN(dfl)+DFISQNAN(dfl)*2; /* quiet > signalling */ + if (DFISSIGNED(dfl)) nanl=-nanl; + nanr=DFISSNAN(dfr)+DFISQNAN(dfr)*2; + if (DFISSIGNED(dfr)) nanr=-nanr; + if (nanl>nanr) comp=+1; + else if (nanl<nanr) comp=-1; + else { /* NaNs are the same type and sign .. must compare payload */ + /* buffers need +2 for QUAD */ + uByte bufl[DECPMAX+4]; /* for LHS coefficient + foot */ + uByte bufr[DECPMAX+4]; /* for RHS coefficient + foot */ + uByte *ub, *uc; /* work */ + Int sigl; /* signum of LHS */ + sigl=(DFISSIGNED(dfl) ? -1 : +1); + + /* decode the coefficients */ + /* (shift both right two if Quad to make a multiple of four) */ + #if QUAD + USHORTAT(bufl)=0; + USHORTAT(bufr)=0; + #endif + GETCOEFF(dfl, bufl+QUAD*2); /* decode from decFloat */ + GETCOEFF(dfr, bufr+QUAD*2); /* .. */ + /* all multiples of four, here */ + comp=0; /* assume equal */ + for (ub=bufl, uc=bufr; ub<bufl+DECPMAX+QUAD*2; ub+=4, uc+=4) { + if (UINTAT(ub)==UINTAT(uc)) continue; /* so far so same */ + /* about to find a winner; go by bytes in case little-endian */ + for (;; ub++, uc++) { + if (*ub==*uc) continue; + if (*ub>*uc) comp=sigl; /* difference found */ + else comp=-sigl; /* .. */ + break; + } + } + } /* same NaN type and sign */ + } + else { + /* numeric comparison needed */ + comp=decNumCompare(dfl, dfr, 1); /* total ordering */ + } + decFloatZero(result); + if (comp==0) return result; + DFBYTE(result, DECBYTES-1)=0x01; /* LSD=1 */ + if (comp<0) DFBYTE(result, 0)|=0x80; /* set sign bit */ + return result; + } /* decFloatCompareTotal */ + +/* ------------------------------------------------------------------ */ +/* decFloatCompareTotalMag -- compare magnitudes with total ordering */ +/* */ +/* result gets the result of comparing abs(dfl) and abs(dfr) */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* returns result, which may be -1, 0, or 1 */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatCompareTotalMag(decFloat *result, + const decFloat *dfl, const decFloat *dfr) { + decFloat a, b; /* for copy if needed */ + /* copy and redirect signed operand(s) */ + if (DFISSIGNED(dfl)) { + decFloatCopyAbs(&a, dfl); + dfl=&a; + } + if (DFISSIGNED(dfr)) { + decFloatCopyAbs(&b, dfr); + dfr=&b; + } + return decFloatCompareTotal(result, dfl, dfr); + } /* decFloatCompareTotalMag */ + +/* ------------------------------------------------------------------ */ +/* decFloatCopy -- copy a decFloat as-is */ +/* */ +/* result gets the copy of dfl */ +/* dfl is the decFloat to copy */ +/* returns result */ +/* */ +/* This is a bitwise operation; no errors or exceptions are possible. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatCopy(decFloat *result, const decFloat *dfl) { + if (dfl!=result) *result=*dfl; /* copy needed */ + return result; + } /* decFloatCopy */ + +/* ------------------------------------------------------------------ */ +/* decFloatCopyAbs -- copy a decFloat as-is and set sign bit to 0 */ +/* */ +/* result gets the copy of dfl with sign bit 0 */ +/* dfl is the decFloat to copy */ +/* returns result */ +/* */ +/* This is a bitwise operation; no errors or exceptions are possible. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatCopyAbs(decFloat *result, const decFloat *dfl) { + if (dfl!=result) *result=*dfl; /* copy needed */ + DFBYTE(result, 0)&=~0x80; /* zero sign bit */ + return result; + } /* decFloatCopyAbs */ + +/* ------------------------------------------------------------------ */ +/* decFloatCopyNegate -- copy a decFloat as-is with inverted sign bit */ +/* */ +/* result gets the copy of dfl with sign bit inverted */ +/* dfl is the decFloat to copy */ +/* returns result */ +/* */ +/* This is a bitwise operation; no errors or exceptions are possible. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatCopyNegate(decFloat *result, const decFloat *dfl) { + if (dfl!=result) *result=*dfl; /* copy needed */ + DFBYTE(result, 0)^=0x80; /* invert sign bit */ + return result; + } /* decFloatCopyNegate */ + +/* ------------------------------------------------------------------ */ +/* decFloatCopySign -- copy a decFloat with the sign of another */ +/* */ +/* result gets the result of copying dfl with the sign of dfr */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* returns result */ +/* */ +/* This is a bitwise operation; no errors or exceptions are possible. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatCopySign(decFloat *result, + const decFloat *dfl, const decFloat *dfr) { + uByte sign=(uByte)(DFBYTE(dfr, 0)&0x80); /* save sign bit */ + if (dfl!=result) *result=*dfl; /* copy needed */ + DFBYTE(result, 0)&=~0x80; /* clear sign .. */ + DFBYTE(result, 0)=(uByte)(DFBYTE(result, 0)|sign); /* .. and set saved */ + return result; + } /* decFloatCopySign */ + +/* ------------------------------------------------------------------ */ +/* decFloatDigits -- return the number of digits in a decFloat */ +/* */ +/* df is the decFloat to investigate */ +/* returns the number of significant digits in the decFloat; a */ +/* zero coefficient returns 1 as does an infinity (a NaN returns */ +/* the number of digits in the payload) */ +/* ------------------------------------------------------------------ */ +/* private macro to extract a declet according to provided formula */ +/* (form), and if it is non-zero then return the calculated digits */ +/* depending on the declet number (n), where n=0 for the most */ +/* significant declet; uses uInt dpd for work */ +#define dpdlenchk(n, form) {dpd=(form)&0x3ff; \ + if (dpd) return (DECPMAX-1-3*(n))-(3-DPD2BCD8[dpd*4+3]);} +/* next one is used when it is known that the declet must be */ +/* non-zero, or is the final zero declet */ +#define dpdlendun(n, form) {dpd=(form)&0x3ff; \ + if (dpd==0) return 1; \ + return (DECPMAX-1-3*(n))-(3-DPD2BCD8[dpd*4+3]);} + +uInt decFloatDigits(const decFloat *df) { + uInt dpd; /* work */ + uInt sourhi=DFWORD(df, 0); /* top word from source decFloat */ + #if QUAD + uInt sourmh, sourml; + #endif + uInt sourlo; + + if (DFISINF(df)) return 1; + /* A NaN effectively has an MSD of 0; otherwise if non-zero MSD */ + /* then the coefficient is full-length */ + if (!DFISNAN(df) && DECCOMBMSD[sourhi>>26]) return DECPMAX; + + #if DOUBLE + if (sourhi&0x0003ffff) { /* ends in first */ + dpdlenchk(0, sourhi>>8); + sourlo=DFWORD(df, 1); + dpdlendun(1, (sourhi<<2) | (sourlo>>30)); + } /* [cannot drop through] */ + sourlo=DFWORD(df, 1); /* sourhi not involved now */ + if (sourlo&0xfff00000) { /* in one of first two */ + dpdlenchk(1, sourlo>>30); /* very rare */ + dpdlendun(2, sourlo>>20); + } /* [cannot drop through] */ + dpdlenchk(3, sourlo>>10); + dpdlendun(4, sourlo); + /* [cannot drop through] */ + + #elif QUAD + if (sourhi&0x00003fff) { /* ends in first */ + dpdlenchk(0, sourhi>>4); + sourmh=DFWORD(df, 1); + dpdlendun(1, ((sourhi)<<6) | (sourmh>>26)); + } /* [cannot drop through] */ + sourmh=DFWORD(df, 1); + if (sourmh) { + dpdlenchk(1, sourmh>>26); + dpdlenchk(2, sourmh>>16); + dpdlenchk(3, sourmh>>6); + sourml=DFWORD(df, 2); + dpdlendun(4, ((sourmh)<<4) | (sourml>>28)); + } /* [cannot drop through] */ + sourml=DFWORD(df, 2); + if (sourml) { + dpdlenchk(4, sourml>>28); + dpdlenchk(5, sourml>>18); + dpdlenchk(6, sourml>>8); + sourlo=DFWORD(df, 3); + dpdlendun(7, ((sourml)<<2) | (sourlo>>30)); + } /* [cannot drop through] */ + sourlo=DFWORD(df, 3); + if (sourlo&0xfff00000) { /* in one of first two */ + dpdlenchk(7, sourlo>>30); /* very rare */ + dpdlendun(8, sourlo>>20); + } /* [cannot drop through] */ + dpdlenchk(9, sourlo>>10); + dpdlendun(10, sourlo); + /* [cannot drop through] */ + #endif + } /* decFloatDigits */ + +/* ------------------------------------------------------------------ */ +/* decFloatDivide -- divide a decFloat by another */ +/* */ +/* result gets the result of dividing dfl by dfr: */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* set is the context */ +/* returns result */ +/* */ +/* ------------------------------------------------------------------ */ +/* This is just a wrapper. */ +decFloat * decFloatDivide(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + return decDivide(result, dfl, dfr, set, DIVIDE); + } /* decFloatDivide */ + +/* ------------------------------------------------------------------ */ +/* decFloatDivideInteger -- integer divide a decFloat by another */ +/* */ +/* result gets the result of dividing dfl by dfr: */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* set is the context */ +/* returns result */ +/* */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatDivideInteger(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + return decDivide(result, dfl, dfr, set, DIVIDEINT); + } /* decFloatDivideInteger */ + +/* ------------------------------------------------------------------ */ +/* decFloatFMA -- multiply and add three decFloats, fused */ +/* */ +/* result gets the result of (dfl*dfr)+dff with a single rounding */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* dff is the final decFloat (fhs) */ +/* set is the context */ +/* returns result */ +/* */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatFMA(decFloat *result, const decFloat *dfl, + const decFloat *dfr, const decFloat *dff, + decContext *set) { + /* The accumulator has the bytes needed for FiniteMultiply, plus */ + /* one byte to the left in case of carry, plus DECPMAX+2 to the */ + /* right for the final addition (up to full fhs + round & sticky) */ + #define FMALEN (1+ (DECPMAX9*18) +DECPMAX+2) + uByte acc[FMALEN]; /* for multiplied coefficient in BCD */ + /* .. and for final result */ + bcdnum mul; /* for multiplication result */ + bcdnum fin; /* for final operand, expanded */ + uByte coe[DECPMAX]; /* dff coefficient in BCD */ + bcdnum *hi, *lo; /* bcdnum with higher/lower exponent */ + uInt diffsign; /* non-zero if signs differ */ + uInt hipad; /* pad digit for hi if needed */ + Int padding; /* excess exponent */ + uInt carry; /* +1 for ten's complement and during add */ + uByte *ub, *uh, *ul; /* work */ + + /* handle all the special values [any special operand leads to a */ + /* special result] */ + if (DFISSPECIAL(dfl) || DFISSPECIAL(dfr) || DFISSPECIAL(dff)) { + decFloat proxy; /* multiplication result proxy */ + /* NaNs are handled as usual, giving priority to sNaNs */ + if (DFISSNAN(dfl) || DFISSNAN(dfr)) return decNaNs(result, dfl, dfr, set); + if (DFISSNAN(dff)) return decNaNs(result, dff, NULL, set); + if (DFISNAN(dfl) || DFISNAN(dfr)) return decNaNs(result, dfl, dfr, set); + if (DFISNAN(dff)) return decNaNs(result, dff, NULL, set); + /* One or more of the three is infinite */ + /* infinity times zero is bad */ + decFloatZero(&proxy); + if (DFISINF(dfl)) { + if (DFISZERO(dfr)) return decInvalid(result, set); + decInfinity(&proxy, &proxy); + } + else if (DFISINF(dfr)) { + if (DFISZERO(dfl)) return decInvalid(result, set); + decInfinity(&proxy, &proxy); + } + /* compute sign of multiplication and place in proxy */ + DFWORD(&proxy, 0)|=(DFWORD(dfl, 0)^DFWORD(dfr, 0))&DECFLOAT_Sign; + if (!DFISINF(dff)) return decFloatCopy(result, &proxy); + /* dff is Infinite */ + if (!DFISINF(&proxy)) return decInfinity(result, dff); + /* both sides of addition are infinite; different sign is bad */ + if ((DFWORD(dff, 0)&DECFLOAT_Sign)!=(DFWORD(&proxy, 0)&DECFLOAT_Sign)) + return decInvalid(result, set); + return decFloatCopy(result, &proxy); + } + + /* Here when all operands are finite */ + + /* First multiply dfl*dfr */ + decFiniteMultiply(&mul, acc+1, dfl, dfr); + /* The multiply is complete, exact and unbounded, and described in */ + /* mul with the coefficient held in acc[1...] */ + + /* now add in dff; the algorithm is essentially the same as */ + /* decFloatAdd, but the code is different because the code there */ + /* is highly optimized for adding two numbers of the same size */ + fin.exponent=GETEXPUN(dff); /* get dff exponent and sign */ + fin.sign=DFWORD(dff, 0)&DECFLOAT_Sign; + diffsign=mul.sign^fin.sign; /* note if signs differ */ + fin.msd=coe; + fin.lsd=coe+DECPMAX-1; + GETCOEFF(dff, coe); /* extract the coefficient */ + + /* now set hi and lo so that hi points to whichever of mul and fin */ + /* has the higher exponent and lo point to the other [don't care if */ + /* the same] */ + if (mul.exponent>=fin.exponent) { + hi=&mul; + lo=&fin; + } + else { + hi=&fin; + lo=&mul; + } + + /* remove leading zeros on both operands; this will save time later */ + /* and make testing for zero trivial */ + for (; UINTAT(hi->msd)==0 && hi->msd+3<hi->lsd;) hi->msd+=4; + for (; *hi->msd==0 && hi->msd<hi->lsd;) hi->msd++; + for (; UINTAT(lo->msd)==0 && lo->msd+3<lo->lsd;) lo->msd+=4; + for (; *lo->msd==0 && lo->msd<lo->lsd;) lo->msd++; + + /* if hi is zero then result will be lo (which has the smaller */ + /* exponent), which also may need to be tested for zero for the */ + /* weird IEEE 754 sign rules */ + if (*hi->msd==0 && hi->msd==hi->lsd) { /* hi is zero */ + /* "When the sum of two operands with opposite signs is */ + /* exactly zero, the sign of that sum shall be '+' in all */ + /* rounding modes except round toward -Infinity, in which */ + /* mode that sign shall be '-'." */ + if (diffsign) { + if (*lo->msd==0 && lo->msd==lo->lsd) { /* lo is zero */ + lo->sign=0; + if (set->round==DEC_ROUND_FLOOR) lo->sign=DECFLOAT_Sign; + } /* diffsign && lo=0 */ + } /* diffsign */ + return decFinalize(result, lo, set); /* may need clamping */ + } /* numfl is zero */ + /* [here, both are minimal length and hi is non-zero] */ + + /* if signs differ, take the ten's complement of hi (zeros to the */ + /* right do not matter because the complement of zero is zero); */ + /* the +1 is done later, as part of the addition, inserted at the */ + /* correct digit */ + hipad=0; + carry=0; + if (diffsign) { + hipad=9; + carry=1; + /* exactly the correct number of digits must be inverted */ + for (uh=hi->msd; uh<hi->lsd-3; uh+=4) UINTAT(uh)=0x09090909-UINTAT(uh); + for (; uh<=hi->lsd; uh++) *uh=(uByte)(0x09-*uh); + } + + /* ready to add; note that hi has no leading zeros so gap */ + /* calculation does not have to be as pessimistic as in decFloatAdd */ + /* (this is much more like the arbitrary-precision algorithm in */ + /* Rexx and decNumber) */ + + /* padding is the number of zeros that would need to be added to hi */ + /* for its lsd to be aligned with the lsd of lo */ + padding=hi->exponent-lo->exponent; + /* printf("FMA pad %ld\n", (LI)padding); */ + + /* the result of the addition will be built into the accumulator, */ + /* starting from the far right; this could be either hi or lo */ + ub=acc+FMALEN-1; /* where lsd of result will go */ + ul=lo->lsd; /* lsd of rhs */ + + if (padding!=0) { /* unaligned */ + /* if the msd of lo is more than DECPMAX+2 digits to the right of */ + /* the original msd of hi then it can be reduced to a single */ + /* digit at the right place, as it stays clear of hi digits */ + /* [it must be DECPMAX+2 because during a subtraction the msd */ + /* could become 0 after a borrow from 1.000 to 0.9999...] */ + Int hilen=(Int)(hi->lsd-hi->msd+1); /* lengths */ + Int lolen=(Int)(lo->lsd-lo->msd+1); /* .. */ + Int newexp=MINI(hi->exponent, hi->exponent+hilen-DECPMAX)-3; + Int reduce=newexp-lo->exponent; + if (reduce>0) { /* [= case gives reduce=0 nop] */ + /* printf("FMA reduce: %ld\n", (LI)reduce); */ + if (reduce>=lolen) { /* eating all */ + lo->lsd=lo->msd; /* reduce to single digit */ + lo->exponent=newexp; /* [known to be non-zero] */ + } + else { /* < */ + uByte *up=lo->lsd; + lo->lsd=lo->lsd-reduce; + if (*lo->lsd==0) /* could need sticky bit */ + for (; up>lo->lsd; up--) { /* search discarded digits */ + if (*up!=0) { /* found one... */ + *lo->lsd=1; /* set sticky bit */ + break; + } + } + lo->exponent+=reduce; + } + padding=hi->exponent-lo->exponent; /* recalculate */ + ul=lo->lsd; /* .. */ + } /* maybe reduce */ + /* padding is now <= DECPMAX+2 but still > 0; tricky DOUBLE case */ + /* is when hi is a 1 that will become a 0.9999... by subtraction: */ + /* hi: 1 E+16 */ + /* lo: .................1000000000000000 E-16 */ + /* which for the addition pads and reduces to: */ + /* hi: 1000000000000000000 E-2 */ + /* lo: .................1 E-2 */ + #if DECCHECK + if (padding>DECPMAX+2) printf("FMA excess padding: %ld\n", (LI)padding); + if (padding<=0) printf("FMA low padding: %ld\n", (LI)padding); + /* printf("FMA padding: %ld\n", (LI)padding); */ + #endif + /* padding digits can now be set in the result; one or more of */ + /* these will come from lo; others will be zeros in the gap */ + for (; ul>=lo->msd && padding>0; padding--, ul--, ub--) *ub=*ul; + for (;padding>0; padding--, ub--) *ub=0; /* mind the gap */ + } + + /* addition now complete to the right of the rightmost digit of hi */ + uh=hi->lsd; + + /* carry was set up depending on ten's complement above; do the add... */ + for (;; ub--) { + uInt hid, lod; + if (uh<hi->msd) { + if (ul<lo->msd) break; + hid=hipad; + } + else hid=*uh--; + if (ul<lo->msd) lod=0; + else lod=*ul--; + *ub=(uByte)(carry+hid+lod); + if (*ub<10) carry=0; + else { + *ub-=10; + carry=1; + } + } /* addition loop */ + + /* addition complete -- now handle carry, borrow, etc. */ + /* use lo to set up the num (its exponent is already correct, and */ + /* sign usually is) */ + lo->msd=ub+1; + lo->lsd=acc+FMALEN-1; + /* decShowNum(lo, "lo"); */ + if (!diffsign) { /* same-sign addition */ + if (carry) { /* carry out */ + *ub=1; /* place the 1 .. */ + lo->msd--; /* .. and update */ + } + } /* same sign */ + else { /* signs differed (subtraction) */ + if (!carry) { /* no carry out means hi<lo */ + /* borrowed -- take ten's complement of the right digits */ + lo->sign=hi->sign; /* sign is lhs sign */ + for (ul=lo->msd; ul<lo->lsd-3; ul+=4) UINTAT(ul)=0x09090909-UINTAT(ul); + for (; ul<=lo->lsd; ul++) *ul=(uByte)(0x09-*ul); /* [leaves ul at lsd+1] */ + /* complete the ten's complement by adding 1 [cannot overrun] */ + for (ul--; *ul==9; ul--) *ul=0; + *ul+=1; + } /* borrowed */ + else { /* carry out means hi>=lo */ + /* sign to use is lo->sign */ + /* all done except for the special IEEE 754 exact-zero-result */ + /* rule (see above); while testing for zero, strip leading */ + /* zeros (which will save decFinalize doing it) */ + for (; UINTAT(lo->msd)==0 && lo->msd+3<lo->lsd;) lo->msd+=4; + for (; *lo->msd==0 && lo->msd<lo->lsd;) lo->msd++; + if (*lo->msd==0) { /* must be true zero (and diffsign) */ + lo->sign=0; /* assume + */ + if (set->round==DEC_ROUND_FLOOR) lo->sign=DECFLOAT_Sign; + } + /* [else was not zero, might still have leading zeros] */ + } /* subtraction gave positive result */ + } /* diffsign */ + + return decFinalize(result, lo, set); /* round, check, and lay out */ + } /* decFloatFMA */ + +/* ------------------------------------------------------------------ */ +/* decFloatFromInt -- initialise a decFloat from an Int */ +/* */ +/* result gets the converted Int */ +/* n is the Int to convert */ +/* returns result */ +/* */ +/* The result is Exact; no errors or exceptions are possible. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatFromInt32(decFloat *result, Int n) { + uInt u=(uInt)n; /* copy as bits */ + uInt encode; /* work */ + DFWORD(result, 0)=ZEROWORD; /* always */ + #if QUAD + DFWORD(result, 1)=0; + DFWORD(result, 2)=0; + #endif + if (n<0) { /* handle -n with care */ + /* [This can be done without the test, but is then slightly slower] */ + u=(~u)+1; + DFWORD(result, 0)|=DECFLOAT_Sign; + } + /* Since the maximum value of u now is 2**31, only the low word of */ + /* result is affected */ + encode=BIN2DPD[u%1000]; + u/=1000; + encode|=BIN2DPD[u%1000]<<10; + u/=1000; + encode|=BIN2DPD[u%1000]<<20; + u/=1000; /* now 0, 1, or 2 */ + encode|=u<<30; + DFWORD(result, DECWORDS-1)=encode; + return result; + } /* decFloatFromInt32 */ + +/* ------------------------------------------------------------------ */ +/* decFloatFromUInt -- initialise a decFloat from a uInt */ +/* */ +/* result gets the converted uInt */ +/* n is the uInt to convert */ +/* returns result */ +/* */ +/* The result is Exact; no errors or exceptions are possible. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatFromUInt32(decFloat *result, uInt u) { + uInt encode; /* work */ + DFWORD(result, 0)=ZEROWORD; /* always */ + #if QUAD + DFWORD(result, 1)=0; + DFWORD(result, 2)=0; + #endif + encode=BIN2DPD[u%1000]; + u/=1000; + encode|=BIN2DPD[u%1000]<<10; + u/=1000; + encode|=BIN2DPD[u%1000]<<20; + u/=1000; /* now 0 -> 4 */ + encode|=u<<30; + DFWORD(result, DECWORDS-1)=encode; + DFWORD(result, DECWORDS-2)|=u>>2; /* rarely non-zero */ + return result; + } /* decFloatFromUInt32 */ + +/* ------------------------------------------------------------------ */ +/* decFloatInvert -- logical digitwise INVERT of a decFloat */ +/* */ +/* result gets the result of INVERTing df */ +/* df is the decFloat to invert */ +/* set is the context */ +/* returns result, which will be canonical with sign=0 */ +/* */ +/* The operand must be positive, finite with exponent q=0, and */ +/* comprise just zeros and ones; if not, Invalid operation results. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatInvert(decFloat *result, const decFloat *df, + decContext *set) { + uInt sourhi=DFWORD(df, 0); /* top word of dfs */ + + if (!DFISUINT01(df) || !DFISCC01(df)) return decInvalid(result, set); + /* the operand is a finite integer (q=0) */ + #if DOUBLE + DFWORD(result, 0)=ZEROWORD|((~sourhi)&0x04009124); + DFWORD(result, 1)=(~DFWORD(df, 1)) &0x49124491; + #elif QUAD + DFWORD(result, 0)=ZEROWORD|((~sourhi)&0x04000912); + DFWORD(result, 1)=(~DFWORD(df, 1)) &0x44912449; + DFWORD(result, 2)=(~DFWORD(df, 2)) &0x12449124; + DFWORD(result, 3)=(~DFWORD(df, 3)) &0x49124491; + #endif + return result; + } /* decFloatInvert */ + +/* ------------------------------------------------------------------ */ +/* decFloatIs -- decFloat tests (IsSigned, etc.) */ +/* */ +/* df is the decFloat to test */ +/* returns 0 or 1 in an int32_t */ +/* */ +/* Many of these could be macros, but having them as real functions */ +/* is a bit cleaner (and they can be referred to here by the generic */ +/* names) */ +/* ------------------------------------------------------------------ */ +uInt decFloatIsCanonical(const decFloat *df) { + if (DFISSPECIAL(df)) { + if (DFISINF(df)) { + if (DFWORD(df, 0)&ECONMASK) return 0; /* exponent continuation */ + if (!DFISCCZERO(df)) return 0; /* coefficient continuation */ + return 1; + } + /* is a NaN */ + if (DFWORD(df, 0)&ECONNANMASK) return 0; /* exponent continuation */ + if (DFISCCZERO(df)) return 1; /* coefficient continuation */ + /* drop through to check payload */ + } + { /* declare block */ + #if DOUBLE + uInt sourhi=DFWORD(df, 0); + uInt sourlo=DFWORD(df, 1); + if (CANONDPDOFF(sourhi, 8) + && CANONDPDTWO(sourhi, sourlo, 30) + && CANONDPDOFF(sourlo, 20) + && CANONDPDOFF(sourlo, 10) + && CANONDPDOFF(sourlo, 0)) return 1; + #elif QUAD + uInt sourhi=DFWORD(df, 0); + uInt sourmh=DFWORD(df, 1); + uInt sourml=DFWORD(df, 2); + uInt sourlo=DFWORD(df, 3); + if (CANONDPDOFF(sourhi, 4) + && CANONDPDTWO(sourhi, sourmh, 26) + && CANONDPDOFF(sourmh, 16) + && CANONDPDOFF(sourmh, 6) + && CANONDPDTWO(sourmh, sourml, 28) + && CANONDPDOFF(sourml, 18) + && CANONDPDOFF(sourml, 8) + && CANONDPDTWO(sourml, sourlo, 30) + && CANONDPDOFF(sourlo, 20) + && CANONDPDOFF(sourlo, 10) + && CANONDPDOFF(sourlo, 0)) return 1; + #endif + } /* block */ + return 0; /* a declet is non-canonical */ + } + +uInt decFloatIsFinite(const decFloat *df) { + return !DFISSPECIAL(df); + } +uInt decFloatIsInfinite(const decFloat *df) { + return DFISINF(df); + } +uInt decFloatIsInteger(const decFloat *df) { + return DFISINT(df); + } +uInt decFloatIsNaN(const decFloat *df) { + return DFISNAN(df); + } +uInt decFloatIsNormal(const decFloat *df) { + Int exp; /* exponent */ + if (DFISSPECIAL(df)) return 0; + if (DFISZERO(df)) return 0; + /* is finite and non-zero */ + exp=GETEXPUN(df) /* get unbiased exponent .. */ + +decFloatDigits(df)-1; /* .. and make adjusted exponent */ + return (exp>=DECEMIN); /* < DECEMIN is subnormal */ + } +uInt decFloatIsSignaling(const decFloat *df) { + return DFISSNAN(df); + } +uInt decFloatIsSignalling(const decFloat *df) { + return DFISSNAN(df); + } +uInt decFloatIsSigned(const decFloat *df) { + return DFISSIGNED(df); + } +uInt decFloatIsSubnormal(const decFloat *df) { + if (DFISSPECIAL(df)) return 0; + /* is finite */ + if (decFloatIsNormal(df)) return 0; + /* it is <Nmin, but could be zero */ + if (DFISZERO(df)) return 0; + return 1; /* is subnormal */ + } +uInt decFloatIsZero(const decFloat *df) { + return DFISZERO(df); + } /* decFloatIs... */ + +/* ------------------------------------------------------------------ */ +/* decFloatLogB -- return adjusted exponent, by 754r rules */ +/* */ +/* result gets the adjusted exponent as an integer, or a NaN etc. */ +/* df is the decFloat to be examined */ +/* set is the context */ +/* returns result */ +/* */ +/* Notable cases: */ +/* A<0 -> Use |A| */ +/* A=0 -> -Infinity (Division by zero) */ +/* A=Infinite -> +Infinity (Exact) */ +/* A=1 exactly -> 0 (Exact) */ +/* NaNs are propagated as usual */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatLogB(decFloat *result, const decFloat *df, + decContext *set) { + Int ae; /* adjusted exponent */ + if (DFISNAN(df)) return decNaNs(result, df, NULL, set); + if (DFISINF(df)) { + DFWORD(result, 0)=0; /* need +ve */ + return decInfinity(result, result); /* canonical +Infinity */ + } + if (DFISZERO(df)) { + set->status|=DEC_Division_by_zero; /* as per 754r */ + DFWORD(result, 0)=DECFLOAT_Sign; /* make negative */ + return decInfinity(result, result); /* canonical -Infinity */ + } + ae=GETEXPUN(df) /* get unbiased exponent .. */ + +decFloatDigits(df)-1; /* .. and make adjusted exponent */ + /* ae has limited range (3 digits for DOUBLE and 4 for QUAD), so */ + /* it is worth using a special case of decFloatFromInt32 */ + DFWORD(result, 0)=ZEROWORD; /* always */ + if (ae<0) { + DFWORD(result, 0)|=DECFLOAT_Sign; /* -0 so far */ + ae=-ae; + } + #if DOUBLE + DFWORD(result, 1)=BIN2DPD[ae]; /* a single declet */ + #elif QUAD + DFWORD(result, 1)=0; + DFWORD(result, 2)=0; + DFWORD(result, 3)=(ae/1000)<<10; /* is <10, so need no DPD encode */ + DFWORD(result, 3)|=BIN2DPD[ae%1000]; + #endif + return result; + } /* decFloatLogB */ + +/* ------------------------------------------------------------------ */ +/* decFloatMax -- return maxnum of two operands */ +/* */ +/* result gets the chosen decFloat */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* set is the context */ +/* returns result */ +/* */ +/* If just one operand is a quiet NaN it is ignored. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatMax(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + Int comp; + if (DFISNAN(dfl)) { + /* sNaN or both NaNs leads to normal NaN processing */ + if (DFISNAN(dfr) || DFISSNAN(dfl)) return decNaNs(result, dfl, dfr, set); + return decCanonical(result, dfr); /* RHS is numeric */ + } + if (DFISNAN(dfr)) { + /* sNaN leads to normal NaN processing (both NaN handled above) */ + if (DFISSNAN(dfr)) return decNaNs(result, dfl, dfr, set); + return decCanonical(result, dfl); /* LHS is numeric */ + } + /* Both operands are numeric; numeric comparison needed -- use */ + /* total order for a well-defined choice (and +0 > -0) */ + comp=decNumCompare(dfl, dfr, 1); + if (comp>=0) return decCanonical(result, dfl); + return decCanonical(result, dfr); + } /* decFloatMax */ + +/* ------------------------------------------------------------------ */ +/* decFloatMaxMag -- return maxnummag of two operands */ +/* */ +/* result gets the chosen decFloat */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* set is the context */ +/* returns result */ +/* */ +/* Returns according to the magnitude comparisons if both numeric and */ +/* unequal, otherwise returns maxnum */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatMaxMag(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + Int comp; + decFloat absl, absr; + if (DFISNAN(dfl) || DFISNAN(dfr)) return decFloatMax(result, dfl, dfr, set); + + decFloatCopyAbs(&absl, dfl); + decFloatCopyAbs(&absr, dfr); + comp=decNumCompare(&absl, &absr, 0); + if (comp>0) return decCanonical(result, dfl); + if (comp<0) return decCanonical(result, dfr); + return decFloatMax(result, dfl, dfr, set); + } /* decFloatMaxMag */ + +/* ------------------------------------------------------------------ */ +/* decFloatMin -- return minnum of two operands */ +/* */ +/* result gets the chosen decFloat */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* set is the context */ +/* returns result */ +/* */ +/* If just one operand is a quiet NaN it is ignored. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatMin(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + Int comp; + if (DFISNAN(dfl)) { + /* sNaN or both NaNs leads to normal NaN processing */ + if (DFISNAN(dfr) || DFISSNAN(dfl)) return decNaNs(result, dfl, dfr, set); + return decCanonical(result, dfr); /* RHS is numeric */ + } + if (DFISNAN(dfr)) { + /* sNaN leads to normal NaN processing (both NaN handled above) */ + if (DFISSNAN(dfr)) return decNaNs(result, dfl, dfr, set); + return decCanonical(result, dfl); /* LHS is numeric */ + } + /* Both operands are numeric; numeric comparison needed -- use */ + /* total order for a well-defined choice (and +0 > -0) */ + comp=decNumCompare(dfl, dfr, 1); + if (comp<=0) return decCanonical(result, dfl); + return decCanonical(result, dfr); + } /* decFloatMin */ + +/* ------------------------------------------------------------------ */ +/* decFloatMinMag -- return minnummag of two operands */ +/* */ +/* result gets the chosen decFloat */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* set is the context */ +/* returns result */ +/* */ +/* Returns according to the magnitude comparisons if both numeric and */ +/* unequal, otherwise returns minnum */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatMinMag(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + Int comp; + decFloat absl, absr; + if (DFISNAN(dfl) || DFISNAN(dfr)) return decFloatMin(result, dfl, dfr, set); + + decFloatCopyAbs(&absl, dfl); + decFloatCopyAbs(&absr, dfr); + comp=decNumCompare(&absl, &absr, 0); + if (comp<0) return decCanonical(result, dfl); + if (comp>0) return decCanonical(result, dfr); + return decFloatMin(result, dfl, dfr, set); + } /* decFloatMinMag */ + +/* ------------------------------------------------------------------ */ +/* decFloatMinus -- negate value, heeding NaNs, etc. */ +/* */ +/* result gets the canonicalized 0-df */ +/* df is the decFloat to minus */ +/* set is the context */ +/* returns result */ +/* */ +/* This has the same effect as 0-df where the exponent of the zero is */ +/* the same as that of df (if df is finite). */ +/* The effect is also the same as decFloatCopyNegate except that NaNs */ +/* are handled normally (the sign of a NaN is not affected, and an */ +/* sNaN will signal), the result is canonical, and zero gets sign 0. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatMinus(decFloat *result, const decFloat *df, + decContext *set) { + if (DFISNAN(df)) return decNaNs(result, df, NULL, set); + decCanonical(result, df); /* copy and check */ + if (DFISZERO(df)) DFBYTE(result, 0)&=~0x80; /* turn off sign bit */ + else DFBYTE(result, 0)^=0x80; /* flip sign bit */ + return result; + } /* decFloatMinus */ + +/* ------------------------------------------------------------------ */ +/* decFloatMultiply -- multiply two decFloats */ +/* */ +/* result gets the result of multiplying dfl and dfr: */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* set is the context */ +/* returns result */ +/* */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatMultiply(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + bcdnum num; /* for final conversion */ + uByte bcdacc[DECPMAX9*18+1]; /* for coefficent in BCD */ + + if (DFISSPECIAL(dfl) || DFISSPECIAL(dfr)) { /* either is special? */ + /* NaNs are handled as usual */ + if (DFISNAN(dfl) || DFISNAN(dfr)) return decNaNs(result, dfl, dfr, set); + /* infinity times zero is bad */ + if (DFISINF(dfl) && DFISZERO(dfr)) return decInvalid(result, set); + if (DFISINF(dfr) && DFISZERO(dfl)) return decInvalid(result, set); + /* both infinite; return canonical infinity with computed sign */ + DFWORD(result, 0)=DFWORD(dfl, 0)^DFWORD(dfr, 0); /* compute sign */ + return decInfinity(result, result); + } + + /* Here when both operands are finite */ + decFiniteMultiply(&num, bcdacc, dfl, dfr); + return decFinalize(result, &num, set); /* round, check, and lay out */ + } /* decFloatMultiply */ + +/* ------------------------------------------------------------------ */ +/* decFloatNextMinus -- next towards -Infinity */ +/* */ +/* result gets the next lesser decFloat */ +/* dfl is the decFloat to start with */ +/* set is the context */ +/* returns result */ +/* */ +/* This is 754r nextdown; Invalid is the only status possible (from */ +/* an sNaN). */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatNextMinus(decFloat *result, const decFloat *dfl, + decContext *set) { + decFloat delta; /* tiny increment */ + uInt savestat; /* saves status */ + enum rounding saveround; /* .. and mode */ + + /* +Infinity is the special case */ + if (DFISINF(dfl) && !DFISSIGNED(dfl)) { + DFSETNMAX(result); + return result; /* [no status to set] */ + } + /* other cases are effected by sutracting a tiny delta -- this */ + /* should be done in a wider format as the delta is unrepresentable */ + /* here (but can be done with normal add if the sign of zero is */ + /* treated carefully, because no Inexactitude is interesting); */ + /* rounding to -Infinity then pushes the result to next below */ + decFloatZero(&delta); /* set up tiny delta */ + DFWORD(&delta, DECWORDS-1)=1; /* coefficient=1 */ + DFWORD(&delta, 0)=DECFLOAT_Sign; /* Sign=1 + biased exponent=0 */ + /* set up for the directional round */ + saveround=set->round; /* save mode */ + set->round=DEC_ROUND_FLOOR; /* .. round towards -Infinity */ + savestat=set->status; /* save status */ + decFloatAdd(result, dfl, &delta, set); + /* Add rules mess up the sign when going from +Ntiny to 0 */ + if (DFISZERO(result)) DFWORD(result, 0)^=DECFLOAT_Sign; /* correct */ + set->status&=DEC_Invalid_operation; /* preserve only sNaN status */ + set->status|=savestat; /* restore pending flags */ + set->round=saveround; /* .. and mode */ + return result; + } /* decFloatNextMinus */ + +/* ------------------------------------------------------------------ */ +/* decFloatNextPlus -- next towards +Infinity */ +/* */ +/* result gets the next larger decFloat */ +/* dfl is the decFloat to start with */ +/* set is the context */ +/* returns result */ +/* */ +/* This is 754r nextup; Invalid is the only status possible (from */ +/* an sNaN). */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatNextPlus(decFloat *result, const decFloat *dfl, + decContext *set) { + uInt savestat; /* saves status */ + enum rounding saveround; /* .. and mode */ + decFloat delta; /* tiny increment */ + + /* -Infinity is the special case */ + if (DFISINF(dfl) && DFISSIGNED(dfl)) { + DFSETNMAX(result); + DFWORD(result, 0)|=DECFLOAT_Sign; /* make negative */ + return result; /* [no status to set] */ + } + /* other cases are effected by sutracting a tiny delta -- this */ + /* should be done in a wider format as the delta is unrepresentable */ + /* here (but can be done with normal add if the sign of zero is */ + /* treated carefully, because no Inexactitude is interesting); */ + /* rounding to +Infinity then pushes the result to next above */ + decFloatZero(&delta); /* set up tiny delta */ + DFWORD(&delta, DECWORDS-1)=1; /* coefficient=1 */ + DFWORD(&delta, 0)=0; /* Sign=0 + biased exponent=0 */ + /* set up for the directional round */ + saveround=set->round; /* save mode */ + set->round=DEC_ROUND_CEILING; /* .. round towards +Infinity */ + savestat=set->status; /* save status */ + decFloatAdd(result, dfl, &delta, set); + /* Add rules mess up the sign when going from -Ntiny to -0 */ + if (DFISZERO(result)) DFWORD(result, 0)^=DECFLOAT_Sign; /* correct */ + set->status&=DEC_Invalid_operation; /* preserve only sNaN status */ + set->status|=savestat; /* restore pending flags */ + set->round=saveround; /* .. and mode */ + return result; + } /* decFloatNextPlus */ + +/* ------------------------------------------------------------------ */ +/* decFloatNextToward -- next towards a decFloat */ +/* */ +/* result gets the next decFloat */ +/* dfl is the decFloat to start with */ +/* dfr is the decFloat to move toward */ +/* set is the context */ +/* returns result */ +/* */ +/* This is 754r nextafter; status may be set unless the result is a */ +/* normal number. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatNextToward(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + decFloat delta; /* tiny increment or decrement */ + decFloat pointone; /* 1e-1 */ + uInt savestat; /* saves status */ + enum rounding saveround; /* .. and mode */ + uInt deltatop; /* top word for delta */ + Int comp; /* work */ + + if (DFISNAN(dfl) || DFISNAN(dfr)) return decNaNs(result, dfl, dfr, set); + /* Both are numeric, so Invalid no longer a possibility */ + comp=decNumCompare(dfl, dfr, 0); + if (comp==0) return decFloatCopySign(result, dfl, dfr); /* equal */ + /* unequal; do NextPlus or NextMinus but with different status rules */ + + if (comp<0) { /* lhs<rhs, do NextPlus, see above for commentary */ + if (DFISINF(dfl) && DFISSIGNED(dfl)) { /* -Infinity special case */ + DFSETNMAX(result); + DFWORD(result, 0)|=DECFLOAT_Sign; + return result; + } + saveround=set->round; /* save mode */ + set->round=DEC_ROUND_CEILING; /* .. round towards +Infinity */ + deltatop=0; /* positive delta */ + } + else { /* lhs>rhs, do NextMinus, see above for commentary */ + if (DFISINF(dfl) && !DFISSIGNED(dfl)) { /* +Infinity special case */ + DFSETNMAX(result); + return result; + } + saveround=set->round; /* save mode */ + set->round=DEC_ROUND_FLOOR; /* .. round towards -Infinity */ + deltatop=DECFLOAT_Sign; /* negative delta */ + } + savestat=set->status; /* save status */ + /* Here, Inexact is needed where appropriate (and hence Underflow, */ + /* etc.). Therefore the tiny delta which is otherwise */ + /* unrepresentable (see NextPlus and NextMinus) is constructed */ + /* using the multiplication of FMA. */ + decFloatZero(&delta); /* set up tiny delta */ + DFWORD(&delta, DECWORDS-1)=1; /* coefficient=1 */ + DFWORD(&delta, 0)=deltatop; /* Sign + biased exponent=0 */ + decFloatFromString(&pointone, "1E-1", set); /* set up multiplier */ + decFloatFMA(result, &delta, &pointone, dfl, set); + /* [Delta is truly tiny, so no need to correct sign of zero] */ + /* use new status unless the result is normal */ + if (decFloatIsNormal(result)) set->status=savestat; /* else goes forward */ + set->round=saveround; /* restore mode */ + return result; + } /* decFloatNextToward */ + +/* ------------------------------------------------------------------ */ +/* decFloatOr -- logical digitwise OR of two decFloats */ +/* */ +/* result gets the result of ORing dfl and dfr */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* set is the context */ +/* returns result, which will be canonical with sign=0 */ +/* */ +/* The operands must be positive, finite with exponent q=0, and */ +/* comprise just zeros and ones; if not, Invalid operation results. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatOr(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + if (!DFISUINT01(dfl) || !DFISUINT01(dfr) + || !DFISCC01(dfl) || !DFISCC01(dfr)) return decInvalid(result, set); + /* the operands are positive finite integers (q=0) with just 0s and 1s */ + #if DOUBLE + DFWORD(result, 0)=ZEROWORD + |((DFWORD(dfl, 0) | DFWORD(dfr, 0))&0x04009124); + DFWORD(result, 1)=(DFWORD(dfl, 1) | DFWORD(dfr, 1))&0x49124491; + #elif QUAD + DFWORD(result, 0)=ZEROWORD + |((DFWORD(dfl, 0) | DFWORD(dfr, 0))&0x04000912); + DFWORD(result, 1)=(DFWORD(dfl, 1) | DFWORD(dfr, 1))&0x44912449; + DFWORD(result, 2)=(DFWORD(dfl, 2) | DFWORD(dfr, 2))&0x12449124; + DFWORD(result, 3)=(DFWORD(dfl, 3) | DFWORD(dfr, 3))&0x49124491; + #endif + return result; + } /* decFloatOr */ + +/* ------------------------------------------------------------------ */ +/* decFloatPlus -- add value to 0, heeding NaNs, etc. */ +/* */ +/* result gets the canonicalized 0+df */ +/* df is the decFloat to plus */ +/* set is the context */ +/* returns result */ +/* */ +/* This has the same effect as 0+df where the exponent of the zero is */ +/* the same as that of df (if df is finite). */ +/* The effect is also the same as decFloatCopy except that NaNs */ +/* are handled normally (the sign of a NaN is not affected, and an */ +/* sNaN will signal), the result is canonical, and zero gets sign 0. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatPlus(decFloat *result, const decFloat *df, + decContext *set) { + if (DFISNAN(df)) return decNaNs(result, df, NULL, set); + decCanonical(result, df); /* copy and check */ + if (DFISZERO(df)) DFBYTE(result, 0)&=~0x80; /* turn off sign bit */ + return result; + } /* decFloatPlus */ + +/* ------------------------------------------------------------------ */ +/* decFloatQuantize -- quantize a decFloat */ +/* */ +/* result gets the result of quantizing dfl to match dfr */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs), which sets the exponent */ +/* set is the context */ +/* returns result */ +/* */ +/* Unless there is an error or the result is infinite, the exponent */ +/* of result is guaranteed to be the same as that of dfr. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatQuantize(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + Int explb, exprb; /* left and right biased exponents */ + uByte *ulsd; /* local LSD pointer */ + uInt *ui; /* work */ + uByte *ub; /* .. */ + Int drop; /* .. */ + uInt dpd; /* .. */ + uInt encode; /* encoding accumulator */ + uInt sourhil, sourhir; /* top words from source decFloats */ + /* the following buffer holds the coefficient for manipulation */ + uByte buf[4+DECPMAX*3]; /* + space for zeros to left or right */ + #if DECTRACE + bcdnum num; /* for trace displays */ + #endif + + /* Start decoding the arguments */ + sourhil=DFWORD(dfl, 0); /* LHS top word */ + explb=DECCOMBEXP[sourhil>>26]; /* get exponent high bits (in place) */ + sourhir=DFWORD(dfr, 0); /* RHS top word */ + exprb=DECCOMBEXP[sourhir>>26]; + + if (EXPISSPECIAL(explb | exprb)) { /* either is special? */ + /* NaNs are handled as usual */ + if (DFISNAN(dfl) || DFISNAN(dfr)) return decNaNs(result, dfl, dfr, set); + /* one infinity but not both is bad */ + if (DFISINF(dfl)!=DFISINF(dfr)) return decInvalid(result, set); + /* both infinite; return canonical infinity with sign of LHS */ + return decInfinity(result, dfl); + } + + /* Here when both arguments are finite */ + /* complete extraction of the exponents [no need to unbias] */ + explb+=GETECON(dfl); /* + continuation */ + exprb+=GETECON(dfr); /* .. */ + + /* calculate the number of digits to drop from the coefficient */ + drop=exprb-explb; /* 0 if nothing to do */ + if (drop==0) return decCanonical(result, dfl); /* return canonical */ + + /* the coefficient is needed; lay it out into buf, offset so zeros */ + /* can be added before or after as needed -- an extra heading is */ + /* added so can safely pad Quad DECPMAX-1 zeros to the left by */ + /* fours */ + #define BUFOFF (buf+4+DECPMAX) + GETCOEFF(dfl, BUFOFF); /* decode from decFloat */ + /* [now the msd is at BUFOFF and the lsd is at BUFOFF+DECPMAX-1] */ + + #if DECTRACE + num.msd=BUFOFF; + num.lsd=BUFOFF+DECPMAX-1; + num.exponent=explb-DECBIAS; + num.sign=sourhil & DECFLOAT_Sign; + decShowNum(&num, "dfl"); + #endif + + if (drop>0) { /* [most common case] */ + /* (this code is very similar to that in decFloatFinalize, but */ + /* has many differences so is duplicated here -- so any changes */ + /* may need to be made there, too) */ + uByte *roundat; /* -> re-round digit */ + uByte reround; /* reround value */ + /* printf("Rounding; drop=%ld\n", (LI)drop); */ + + /* there is at least one zero needed to the left, in all but one */ + /* exceptional (all-nines) case, so place four zeros now; this is */ + /* needed almost always and makes rounding all-nines by fours safe */ + UINTAT(BUFOFF-4)=0; + + /* Three cases here: */ + /* 1. new LSD is in coefficient (almost always) */ + /* 2. new LSD is digit to left of coefficient (so MSD is */ + /* round-for-reround digit) */ + /* 3. new LSD is to left of case 2 (whole coefficient is sticky) */ + /* Note that leading zeros can safely be treated as useful digits */ + + /* [duplicate check-stickies code to save a test] */ + /* [by-digit check for stickies as runs of zeros are rare] */ + if (drop<DECPMAX) { /* NB lengths not addresses */ + roundat=BUFOFF+DECPMAX-drop; + reround=*roundat; + for (ub=roundat+1; ub<BUFOFF+DECPMAX; ub++) { + if (*ub!=0) { /* non-zero to be discarded */ + reround=DECSTICKYTAB[reround]; /* apply sticky bit */ + break; /* [remainder don't-care] */ + } + } /* check stickies */ + ulsd=roundat-1; /* set LSD */ + } + else { /* edge case */ + if (drop==DECPMAX) { + roundat=BUFOFF; + reround=*roundat; + } + else { + roundat=BUFOFF-1; + reround=0; + } + for (ub=roundat+1; ub<BUFOFF+DECPMAX; ub++) { + if (*ub!=0) { /* non-zero to be discarded */ + reround=DECSTICKYTAB[reround]; /* apply sticky bit */ + break; /* [remainder don't-care] */ + } + } /* check stickies */ + *BUFOFF=0; /* make a coefficient of 0 */ + ulsd=BUFOFF; /* .. at the MSD place */ + } + + if (reround!=0) { /* discarding non-zero */ + uInt bump=0; + set->status|=DEC_Inexact; + + /* next decide whether to increment the coefficient */ + if (set->round==DEC_ROUND_HALF_EVEN) { /* fastpath slowest case */ + if (reround>5) bump=1; /* >0.5 goes up */ + else if (reround==5) /* exactly 0.5000 .. */ + bump=*ulsd & 0x01; /* .. up iff [new] lsd is odd */ + } /* r-h-e */ + else switch (set->round) { + case DEC_ROUND_DOWN: { + /* no change */ + break;} /* r-d */ + case DEC_ROUND_HALF_DOWN: { + if (reround>5) bump=1; + break;} /* r-h-d */ + case DEC_ROUND_HALF_UP: { + if (reround>=5) bump=1; + break;} /* r-h-u */ + case DEC_ROUND_UP: { + if (reround>0) bump=1; + break;} /* r-u */ + case DEC_ROUND_CEILING: { + /* same as _UP for positive numbers, and as _DOWN for negatives */ + if (!(sourhil&DECFLOAT_Sign) && reround>0) bump=1; + break;} /* r-c */ + case DEC_ROUND_FLOOR: { + /* same as _UP for negative numbers, and as _DOWN for positive */ + /* [negative reround cannot occur on 0] */ + if (sourhil&DECFLOAT_Sign && reround>0) bump=1; + break;} /* r-f */ + case DEC_ROUND_05UP: { + if (reround>0) { /* anything out there is 'sticky' */ + /* bump iff lsd=0 or 5; this cannot carry so it could be */ + /* effected immediately with no bump -- but the code */ + /* is clearer if this is done the same way as the others */ + if (*ulsd==0 || *ulsd==5) bump=1; + } + break;} /* r-r */ + default: { /* e.g., DEC_ROUND_MAX */ + set->status|=DEC_Invalid_context; + #if DECCHECK + printf("Unknown rounding mode: %ld\n", (LI)set->round); + #endif + break;} + } /* switch (not r-h-e) */ + /* printf("ReRound: %ld bump: %ld\n", (LI)reround, (LI)bump); */ + + if (bump!=0) { /* need increment */ + /* increment the coefficient; this could give 1000... (after */ + /* the all nines case) */ + ub=ulsd; + for (; UINTAT(ub-3)==0x09090909; ub-=4) UINTAT(ub-3)=0; + /* now at most 3 digits left to non-9 (usually just the one) */ + for (; *ub==9; ub--) *ub=0; + *ub+=1; + /* [the all-nines case will have carried one digit to the */ + /* left of the original MSD -- just where it is needed] */ + } /* bump needed */ + } /* inexact rounding */ + + /* now clear zeros to the left so exactly DECPMAX digits will be */ + /* available in the coefficent -- the first word to the left was */ + /* cleared earlier for safe carry; now add any more needed */ + if (drop>4) { + UINTAT(BUFOFF-8)=0; /* must be at least 5 */ + for (ui=&UINTAT(BUFOFF-12); ui>&UINTAT(ulsd-DECPMAX-3); ui--) *ui=0; + } + } /* need round (drop>0) */ + + else { /* drop<0; padding with -drop digits is needed */ + /* This is the case where an error can occur if the padded */ + /* coefficient will not fit; checking for this can be done in the */ + /* same loop as padding for zeros if the no-hope and zero cases */ + /* are checked first */ + if (-drop>DECPMAX-1) { /* cannot fit unless 0 */ + if (!ISCOEFFZERO(BUFOFF)) return decInvalid(result, set); + /* a zero can have any exponent; just drop through and use it */ + ulsd=BUFOFF+DECPMAX-1; + } + else { /* padding will fit (but may still be too long) */ + /* final-word mask depends on endianess */ + #if DECLITEND + static const uInt dmask[]={0, 0x000000ff, 0x0000ffff, 0x00ffffff}; + #else + static const uInt dmask[]={0, 0xff000000, 0xffff0000, 0xffffff00}; + #endif + for (ui=&UINTAT(BUFOFF+DECPMAX);; ui++) { + *ui=0; + if (UINTAT(&UBYTEAT(ui)-DECPMAX)!=0) { /* could be bad */ + /* if all four digits should be zero, definitely bad */ + if (ui<=&UINTAT(BUFOFF+DECPMAX+(-drop)-4)) + return decInvalid(result, set); + /* must be a 1- to 3-digit sequence; check more carefully */ + if ((UINTAT(&UBYTEAT(ui)-DECPMAX)&dmask[(-drop)%4])!=0) + return decInvalid(result, set); + break; /* no need for loop end test */ + } + if (ui>=&UINTAT(BUFOFF+DECPMAX+(-drop)-4)) break; /* done */ + } + ulsd=BUFOFF+DECPMAX+(-drop)-1; + } /* pad and check leading zeros */ + } /* drop<0 */ + + #if DECTRACE + num.msd=ulsd-DECPMAX+1; + num.lsd=ulsd; + num.exponent=explb-DECBIAS; + num.sign=sourhil & DECFLOAT_Sign; + decShowNum(&num, "res"); + #endif + + /*------------------------------------------------------------------*/ + /* At this point the result is DECPMAX digits, ending at ulsd, so */ + /* fits the encoding exactly; there is no possibility of error */ + /*------------------------------------------------------------------*/ + encode=((exprb>>DECECONL)<<4) + *(ulsd-DECPMAX+1); /* make index */ + encode=DECCOMBFROM[encode]; /* indexed by (0-2)*16+msd */ + /* the exponent continuation can be extracted from the original RHS */ + encode|=sourhir & ECONMASK; + encode|=sourhil&DECFLOAT_Sign; /* add the sign from LHS */ + + /* finally encode the coefficient */ + /* private macro to encode a declet; this version can be used */ + /* because all coefficient digits exist */ + #define getDPD3q(dpd, n) ub=ulsd-(3*(n))-2; \ + dpd=BCD2DPD[(*ub*256)+(*(ub+1)*16)+*(ub+2)]; + + #if DOUBLE + getDPD3q(dpd, 4); encode|=dpd<<8; + getDPD3q(dpd, 3); encode|=dpd>>2; + DFWORD(result, 0)=encode; + encode=dpd<<30; + getDPD3q(dpd, 2); encode|=dpd<<20; + getDPD3q(dpd, 1); encode|=dpd<<10; + getDPD3q(dpd, 0); encode|=dpd; + DFWORD(result, 1)=encode; + + #elif QUAD + getDPD3q(dpd,10); encode|=dpd<<4; + getDPD3q(dpd, 9); encode|=dpd>>6; + DFWORD(result, 0)=encode; + encode=dpd<<26; + getDPD3q(dpd, 8); encode|=dpd<<16; + getDPD3q(dpd, 7); encode|=dpd<<6; + getDPD3q(dpd, 6); encode|=dpd>>4; + DFWORD(result, 1)=encode; + encode=dpd<<28; + getDPD3q(dpd, 5); encode|=dpd<<18; + getDPD3q(dpd, 4); encode|=dpd<<8; + getDPD3q(dpd, 3); encode|=dpd>>2; + DFWORD(result, 2)=encode; + encode=dpd<<30; + getDPD3q(dpd, 2); encode|=dpd<<20; + getDPD3q(dpd, 1); encode|=dpd<<10; + getDPD3q(dpd, 0); encode|=dpd; + DFWORD(result, 3)=encode; + #endif + return result; + } /* decFloatQuantize */ + +/* ------------------------------------------------------------------ */ +/* decFloatReduce -- reduce finite coefficient to minimum length */ +/* */ +/* result gets the reduced decFloat */ +/* df is the source decFloat */ +/* set is the context */ +/* returns result, which will be canonical */ +/* */ +/* This removes all possible trailing zeros from the coefficient; */ +/* some may remain when the number is very close to Nmax. */ +/* Special values are unchanged and no status is set unless df=sNaN. */ +/* Reduced zero has an exponent q=0. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatReduce(decFloat *result, const decFloat *df, + decContext *set) { + bcdnum num; /* work */ + uByte buf[DECPMAX], *ub; /* coefficient and pointer */ + if (df!=result) *result=*df; /* copy, if needed */ + if (DFISNAN(df)) return decNaNs(result, df, NULL, set); /* sNaN */ + /* zeros and infinites propagate too */ + if (DFISINF(df)) return decInfinity(result, df); /* canonical */ + if (DFISZERO(df)) { + uInt sign=DFWORD(df, 0)&DECFLOAT_Sign; + decFloatZero(result); + DFWORD(result, 0)|=sign; + return result; /* exponent dropped, sign OK */ + } + /* non-zero finite */ + GETCOEFF(df, buf); + ub=buf+DECPMAX-1; /* -> lsd */ + if (*ub) return result; /* no trailing zeros */ + for (ub--; *ub==0;) ub--; /* terminates because non-zero */ + /* *ub is the first non-zero from the right */ + num.sign=DFWORD(df, 0)&DECFLOAT_Sign; /* set up number... */ + num.exponent=GETEXPUN(df)+(Int)(buf+DECPMAX-1-ub); /* adjusted exponent */ + num.msd=buf; + num.lsd=ub; + return decFinalize(result, &num, set); + } /* decFloatReduce */ + +/* ------------------------------------------------------------------ */ +/* decFloatRemainder -- integer divide and return remainder */ +/* */ +/* result gets the remainder of dividing dfl by dfr: */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* set is the context */ +/* returns result */ +/* */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatRemainder(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + return decDivide(result, dfl, dfr, set, REMAINDER); + } /* decFloatRemainder */ + +/* ------------------------------------------------------------------ */ +/* decFloatRemainderNear -- integer divide to nearest and remainder */ +/* */ +/* result gets the remainder of dividing dfl by dfr: */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* set is the context */ +/* returns result */ +/* */ +/* This is the IEEE remainder, where the nearest integer is used. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatRemainderNear(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + return decDivide(result, dfl, dfr, set, REMNEAR); + } /* decFloatRemainderNear */ + +/* ------------------------------------------------------------------ */ +/* decFloatRotate -- rotate the coefficient of a decFloat left/right */ +/* */ +/* result gets the result of rotating dfl */ +/* dfl is the source decFloat to rotate */ +/* dfr is the count of digits to rotate, an integer (with q=0) */ +/* set is the context */ +/* returns result */ +/* */ +/* The digits of the coefficient of dfl are rotated to the left (if */ +/* dfr is positive) or to the right (if dfr is negative) without */ +/* adjusting the exponent or the sign of dfl. */ +/* */ +/* dfr must be in the range -DECPMAX through +DECPMAX. */ +/* NaNs are propagated as usual. An infinite dfl is unaffected (but */ +/* dfr must be valid). No status is set unless dfr is invalid or an */ +/* operand is an sNaN. The result is canonical. */ +/* ------------------------------------------------------------------ */ +#define PHALF (ROUNDUP(DECPMAX/2, 4)) /* half length, rounded up */ +decFloat * decFloatRotate(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + Int rotate; /* dfr as an Int */ + uByte buf[DECPMAX+PHALF]; /* coefficient + half */ + uInt digits, savestat; /* work */ + bcdnum num; /* .. */ + uByte *ub; /* .. */ + + if (DFISNAN(dfl)||DFISNAN(dfr)) return decNaNs(result, dfl, dfr, set); + if (!DFISINT(dfr)) return decInvalid(result, set); + digits=decFloatDigits(dfr); /* calculate digits */ + if (digits>2) return decInvalid(result, set); /* definitely out of range */ + rotate=DPD2BIN[DFWORD(dfr, DECWORDS-1)&0x3ff]; /* is in bottom declet */ + if (rotate>DECPMAX) return decInvalid(result, set); /* too big */ + /* [from here on no error or status change is possible] */ + if (DFISINF(dfl)) return decInfinity(result, dfl); /* canonical */ + /* handle no-rotate cases */ + if (rotate==0 || rotate==DECPMAX) return decCanonical(result, dfl); + /* a real rotate is needed: 0 < rotate < DECPMAX */ + /* reduce the rotation to no more than half to reduce copying later */ + /* (for QUAD in fact half + 2 digits) */ + if (DFISSIGNED(dfr)) rotate=-rotate; + if (abs(rotate)>PHALF) { + if (rotate<0) rotate=DECPMAX+rotate; + else rotate=rotate-DECPMAX; + } + /* now lay out the coefficient, leaving room to the right or the */ + /* left depending on the direction of rotation */ + ub=buf; + if (rotate<0) ub+=PHALF; /* rotate right, so space to left */ + GETCOEFF(dfl, ub); + /* copy half the digits to left or right, and set num.msd */ + if (rotate<0) { + memcpy(buf, buf+DECPMAX, PHALF); + num.msd=buf+PHALF+rotate; + } + else { + memcpy(buf+DECPMAX, buf, PHALF); + num.msd=buf+rotate; + } + /* fill in rest of num */ + num.lsd=num.msd+DECPMAX-1; + num.sign=DFWORD(dfl, 0)&DECFLOAT_Sign; + num.exponent=GETEXPUN(dfl); + savestat=set->status; /* record */ + decFinalize(result, &num, set); + set->status=savestat; /* restore */ + return result; + } /* decFloatRotate */ + +/* ------------------------------------------------------------------ */ +/* decFloatSameQuantum -- test decFloats for same quantum */ +/* */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* returns 1 if the operands have the same quantum, 0 otherwise */ +/* */ +/* No error is possible and no status results. */ +/* ------------------------------------------------------------------ */ +uInt decFloatSameQuantum(const decFloat *dfl, const decFloat *dfr) { + if (DFISSPECIAL(dfl) || DFISSPECIAL(dfr)) { + if (DFISNAN(dfl) && DFISNAN(dfr)) return 1; + if (DFISINF(dfl) && DFISINF(dfr)) return 1; + return 0; /* any other special mixture gives false */ + } + if (GETEXP(dfl)==GETEXP(dfr)) return 1; /* biased exponents match */ + return 0; + } /* decFloatSameQuantum */ + +/* ------------------------------------------------------------------ */ +/* decFloatScaleB -- multiply by a power of 10, as per 754r */ +/* */ +/* result gets the result of the operation */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs), am integer (with q=0) */ +/* set is the context */ +/* returns result */ +/* */ +/* This computes result=dfl x 10**dfr where dfr is an integer in the */ +/* range +/-2*(emax+pmax), typically resulting from LogB. */ +/* Underflow and Overflow (with Inexact) may occur. NaNs propagate */ +/* as usual. */ +/* ------------------------------------------------------------------ */ +#define SCALEBMAX 2*(DECEMAX+DECPMAX) /* D=800, Q=12356 */ +decFloat * decFloatScaleB(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + uInt digits; /* work */ + Int expr; /* dfr as an Int */ + + if (DFISNAN(dfl)||DFISNAN(dfr)) return decNaNs(result, dfl, dfr, set); + if (!DFISINT(dfr)) return decInvalid(result, set); + digits=decFloatDigits(dfr); /* calculate digits */ + + #if DOUBLE + if (digits>3) return decInvalid(result, set); /* definitely out of range */ + expr=DPD2BIN[DFWORD(dfr, 1)&0x3ff]; /* must be in bottom declet */ + #elif QUAD + if (digits>5) return decInvalid(result, set); /* definitely out of range */ + expr=DPD2BIN[DFWORD(dfr, 3)&0x3ff] /* in bottom 2 declets .. */ + +DPD2BIN[(DFWORD(dfr, 3)>>10)&0x3ff]*1000; /* .. */ + #endif + if (expr>SCALEBMAX) return decInvalid(result, set); /* oops */ + /* [from now on no error possible] */ + if (DFISINF(dfl)) return decInfinity(result, dfl); /* canonical */ + if (DFISSIGNED(dfr)) expr=-expr; + /* dfl is finite and expr is valid */ + *result=*dfl; /* copy to target */ + return decFloatSetExponent(result, set, GETEXPUN(result)+expr); + } /* decFloatScaleB */ + +/* ------------------------------------------------------------------ */ +/* decFloatShift -- shift the coefficient of a decFloat left or right */ +/* */ +/* result gets the result of shifting dfl */ +/* dfl is the source decFloat to shift */ +/* dfr is the count of digits to shift, an integer (with q=0) */ +/* set is the context */ +/* returns result */ +/* */ +/* The digits of the coefficient of dfl are shifted to the left (if */ +/* dfr is positive) or to the right (if dfr is negative) without */ +/* adjusting the exponent or the sign of dfl. */ +/* */ +/* dfr must be in the range -DECPMAX through +DECPMAX. */ +/* NaNs are propagated as usual. An infinite dfl is unaffected (but */ +/* dfr must be valid). No status is set unless dfr is invalid or an */ +/* operand is an sNaN. The result is canonical. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatShift(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + Int shift; /* dfr as an Int */ + uByte buf[DECPMAX*2]; /* coefficient + padding */ + uInt digits, savestat; /* work */ + bcdnum num; /* .. */ + + if (DFISNAN(dfl)||DFISNAN(dfr)) return decNaNs(result, dfl, dfr, set); + if (!DFISINT(dfr)) return decInvalid(result, set); + digits=decFloatDigits(dfr); /* calculate digits */ + if (digits>2) return decInvalid(result, set); /* definitely out of range */ + shift=DPD2BIN[DFWORD(dfr, DECWORDS-1)&0x3ff]; /* is in bottom declet */ + if (shift>DECPMAX) return decInvalid(result, set); /* too big */ + /* [from here on no error or status change is possible] */ + + if (DFISINF(dfl)) return decInfinity(result, dfl); /* canonical */ + /* handle no-shift and all-shift (clear to zero) cases */ + if (shift==0) return decCanonical(result, dfl); + if (shift==DECPMAX) { /* zero with sign */ + uByte sign=(uByte)(DFBYTE(dfl, 0)&0x80); /* save sign bit */ + decFloatZero(result); /* make +0 */ + DFBYTE(result, 0)=(uByte)(DFBYTE(result, 0)|sign); /* and set sign */ + /* [cannot safely use CopySign] */ + return result; + } + /* a real shift is needed: 0 < shift < DECPMAX */ + num.sign=DFWORD(dfl, 0)&DECFLOAT_Sign; + num.exponent=GETEXPUN(dfl); + num.msd=buf; + GETCOEFF(dfl, buf); + if (DFISSIGNED(dfr)) { /* shift right */ + /* edge cases are taken care of, so this is easy */ + num.lsd=buf+DECPMAX-shift-1; + } + else { /* shift left -- zero padding needed to right */ + UINTAT(buf+DECPMAX)=0; /* 8 will handle most cases */ + UINTAT(buf+DECPMAX+4)=0; /* .. */ + if (shift>8) memset(buf+DECPMAX+8, 0, 8+QUAD*18); /* all other cases */ + num.msd+=shift; + num.lsd=num.msd+DECPMAX-1; + } + savestat=set->status; /* record */ + decFinalize(result, &num, set); + set->status=savestat; /* restore */ + return result; + } /* decFloatShift */ + +/* ------------------------------------------------------------------ */ +/* decFloatSubtract -- subtract a decFloat from another */ +/* */ +/* result gets the result of subtracting dfr from dfl: */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* set is the context */ +/* returns result */ +/* */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatSubtract(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + decFloat temp; + /* NaNs must propagate without sign change */ + if (DFISNAN(dfr)) return decFloatAdd(result, dfl, dfr, set); + temp=*dfr; /* make a copy */ + DFBYTE(&temp, 0)^=0x80; /* flip sign */ + return decFloatAdd(result, dfl, &temp, set); /* and add to the lhs */ + } /* decFloatSubtract */ + +/* ------------------------------------------------------------------ */ +/* decFloatToInt -- round to 32-bit binary integer (4 flavours) */ +/* */ +/* df is the decFloat to round */ +/* set is the context */ +/* round is the rounding mode to use */ +/* returns a uInt or an Int, rounded according to the name */ +/* */ +/* Invalid will always be signaled if df is a NaN, is Infinite, or is */ +/* outside the range of the target; Inexact will not be signaled for */ +/* simple rounding unless 'Exact' appears in the name. */ +/* ------------------------------------------------------------------ */ +uInt decFloatToUInt32(const decFloat *df, decContext *set, + enum rounding round) { + return decToInt32(df, set, round, 0, 1);} + +uInt decFloatToUInt32Exact(const decFloat *df, decContext *set, + enum rounding round) { + return decToInt32(df, set, round, 1, 1);} + +Int decFloatToInt32(const decFloat *df, decContext *set, + enum rounding round) { + return (Int)decToInt32(df, set, round, 0, 0);} + +Int decFloatToInt32Exact(const decFloat *df, decContext *set, + enum rounding round) { + return (Int)decToInt32(df, set, round, 1, 0);} + +/* ------------------------------------------------------------------ */ +/* decFloatToIntegral -- round to integral value (two flavours) */ +/* */ +/* result gets the result */ +/* df is the decFloat to round */ +/* set is the context */ +/* round is the rounding mode to use */ +/* returns result */ +/* */ +/* No exceptions, even Inexact, are raised except for sNaN input, or */ +/* if 'Exact' appears in the name. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatToIntegralValue(decFloat *result, const decFloat *df, + decContext *set, enum rounding round) { + return decToIntegral(result, df, set, round, 0);} + +decFloat * decFloatToIntegralExact(decFloat *result, const decFloat *df, + decContext *set) { + return decToIntegral(result, df, set, set->round, 1);} + +/* ------------------------------------------------------------------ */ +/* decFloatXor -- logical digitwise XOR of two decFloats */ +/* */ +/* result gets the result of XORing dfl and dfr */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) */ +/* set is the context */ +/* returns result, which will be canonical with sign=0 */ +/* */ +/* The operands must be positive, finite with exponent q=0, and */ +/* comprise just zeros and ones; if not, Invalid operation results. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatXor(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + if (!DFISUINT01(dfl) || !DFISUINT01(dfr) + || !DFISCC01(dfl) || !DFISCC01(dfr)) return decInvalid(result, set); + /* the operands are positive finite integers (q=0) with just 0s and 1s */ + #if DOUBLE + DFWORD(result, 0)=ZEROWORD + |((DFWORD(dfl, 0) ^ DFWORD(dfr, 0))&0x04009124); + DFWORD(result, 1)=(DFWORD(dfl, 1) ^ DFWORD(dfr, 1))&0x49124491; + #elif QUAD + DFWORD(result, 0)=ZEROWORD + |((DFWORD(dfl, 0) ^ DFWORD(dfr, 0))&0x04000912); + DFWORD(result, 1)=(DFWORD(dfl, 1) ^ DFWORD(dfr, 1))&0x44912449; + DFWORD(result, 2)=(DFWORD(dfl, 2) ^ DFWORD(dfr, 2))&0x12449124; + DFWORD(result, 3)=(DFWORD(dfl, 3) ^ DFWORD(dfr, 3))&0x49124491; + #endif + return result; + } /* decFloatXor */ + +/* ------------------------------------------------------------------ */ +/* decInvalid -- set Invalid_operation result */ +/* */ +/* result gets a canonical NaN */ +/* set is the context */ +/* returns result */ +/* */ +/* status has Invalid_operation added */ +/* ------------------------------------------------------------------ */ +static decFloat *decInvalid(decFloat *result, decContext *set) { + decFloatZero(result); + DFWORD(result, 0)=DECFLOAT_qNaN; + set->status|=DEC_Invalid_operation; + return result; + } /* decInvalid */ + +/* ------------------------------------------------------------------ */ +/* decInfinity -- set canonical Infinity with sign from a decFloat */ +/* */ +/* result gets a canonical Infinity */ +/* df is source decFloat (only the sign is used) */ +/* returns result */ +/* */ +/* df may be the same as result */ +/* ------------------------------------------------------------------ */ +static decFloat *decInfinity(decFloat *result, const decFloat *df) { + uInt sign=DFWORD(df, 0); /* save source signword */ + decFloatZero(result); /* clear everything */ + DFWORD(result, 0)=DECFLOAT_Inf | (sign & DECFLOAT_Sign); + return result; + } /* decInfinity */ + +/* ------------------------------------------------------------------ */ +/* decNaNs -- handle NaN argument(s) */ +/* */ +/* result gets the result of handling dfl and dfr, one or both of */ +/* which is a NaN */ +/* dfl is the first decFloat (lhs) */ +/* dfr is the second decFloat (rhs) -- may be NULL for a single- */ +/* operand operation */ +/* set is the context */ +/* returns result */ +/* */ +/* Called when one or both operands is a NaN, and propagates the */ +/* appropriate result to res. When an sNaN is found, it is changed */ +/* to a qNaN and Invalid operation is set. */ +/* ------------------------------------------------------------------ */ +static decFloat *decNaNs(decFloat *result, + const decFloat *dfl, const decFloat *dfr, + decContext *set) { + /* handle sNaNs first */ + if (dfr!=NULL && DFISSNAN(dfr) && !DFISSNAN(dfl)) dfl=dfr; /* use RHS */ + if (DFISSNAN(dfl)) { + decCanonical(result, dfl); /* propagate canonical sNaN */ + DFWORD(result, 0)&=~(DECFLOAT_qNaN ^ DECFLOAT_sNaN); /* quiet */ + set->status|=DEC_Invalid_operation; + return result; + } + /* one or both is a quiet NaN */ + if (!DFISNAN(dfl)) dfl=dfr; /* RHS must be NaN, use it */ + return decCanonical(result, dfl); /* propagate canonical qNaN */ + } /* decNaNs */ + +/* ------------------------------------------------------------------ */ +/* decNumCompare -- numeric comparison of two decFloats */ +/* */ +/* dfl is the left-hand decFloat, which is not a NaN */ +/* dfr is the right-hand decFloat, which is not a NaN */ +/* tot is 1 for total order compare, 0 for simple numeric */ +/* returns -1, 0, or +1 for dfl<dfr, dfl=dfr, dfl>dfr */ +/* */ +/* No error is possible; status and mode are unchanged. */ +/* ------------------------------------------------------------------ */ +static Int decNumCompare(const decFloat *dfl, const decFloat *dfr, Flag tot) { + Int sigl, sigr; /* LHS and RHS non-0 signums */ + Int shift; /* shift needed to align operands */ + uByte *ub, *uc; /* work */ + /* buffers +2 if Quad (36 digits), need double plus 4 for safe padding */ + uByte bufl[DECPMAX*2+QUAD*2+4]; /* for LHS coefficient + padding */ + uByte bufr[DECPMAX*2+QUAD*2+4]; /* for RHS coefficient + padding */ + + sigl=1; + if (DFISSIGNED(dfl)) { + if (!DFISSIGNED(dfr)) { /* -LHS +RHS */ + if (DFISZERO(dfl) && DFISZERO(dfr) && !tot) return 0; + return -1; /* RHS wins */ + } + sigl=-1; + } + if (DFISSIGNED(dfr)) { + if (!DFISSIGNED(dfl)) { /* +LHS -RHS */ + if (DFISZERO(dfl) && DFISZERO(dfr) && !tot) return 0; + return +1; /* LHS wins */ + } + } + + /* signs are the same; operand(s) could be zero */ + sigr=-sigl; /* sign to return if abs(RHS) wins */ + + if (DFISINF(dfl)) { + if (DFISINF(dfr)) return 0; /* both infinite & same sign */ + return sigl; /* inf > n */ + } + if (DFISINF(dfr)) return sigr; /* n < inf [dfl is finite] */ + + /* here, both are same sign and finite; calculate their offset */ + shift=GETEXP(dfl)-GETEXP(dfr); /* [0 means aligned] */ + /* [bias can be ignored -- the absolute exponent is not relevant] */ + + if (DFISZERO(dfl)) { + if (!DFISZERO(dfr)) return sigr; /* LHS=0, RHS!=0 */ + /* both are zero, return 0 if both same exponent or numeric compare */ + if (shift==0 || !tot) return 0; + if (shift>0) return sigl; + return sigr; /* [shift<0] */ + } + else { /* LHS!=0 */ + if (DFISZERO(dfr)) return sigl; /* LHS!=0, RHS=0 */ + } + /* both are known to be non-zero at this point */ + + /* if the exponents are so different that the coefficients do not */ + /* overlap (by even one digit) then a full comparison is not needed */ + if (abs(shift)>=DECPMAX) { /* no overlap */ + /* coefficients are known to be non-zero */ + if (shift>0) return sigl; + return sigr; /* [shift<0] */ + } + + /* decode the coefficients */ + /* (shift both right two if Quad to make a multiple of four) */ + #if QUAD + UINTAT(bufl)=0; + UINTAT(bufr)=0; + #endif + GETCOEFF(dfl, bufl+QUAD*2); /* decode from decFloat */ + GETCOEFF(dfr, bufr+QUAD*2); /* .. */ + if (shift==0) { /* aligned; common and easy */ + /* all multiples of four, here */ + for (ub=bufl, uc=bufr; ub<bufl+DECPMAX+QUAD*2; ub+=4, uc+=4) { + if (UINTAT(ub)==UINTAT(uc)) continue; /* so far so same */ + /* about to find a winner; go by bytes in case little-endian */ + for (;; ub++, uc++) { + if (*ub>*uc) return sigl; /* difference found */ + if (*ub<*uc) return sigr; /* .. */ + } + } + } /* aligned */ + else if (shift>0) { /* lhs to left */ + ub=bufl; /* RHS pointer */ + /* pad bufl so right-aligned; most shifts will fit in 8 */ + UINTAT(bufl+DECPMAX+QUAD*2)=0; /* add eight zeros */ + UINTAT(bufl+DECPMAX+QUAD*2+4)=0; /* .. */ + if (shift>8) { + /* more than eight; fill the rest, and also worth doing the */ + /* lead-in by fours */ + uByte *up; /* work */ + uByte *upend=bufl+DECPMAX+QUAD*2+shift; + for (up=bufl+DECPMAX+QUAD*2+8; up<upend; up+=4) UINTAT(up)=0; + /* [pads up to 36 in all for Quad] */ + for (;; ub+=4) { + if (UINTAT(ub)!=0) return sigl; + if (ub+4>bufl+shift-4) break; + } + } + /* check remaining leading digits */ + for (; ub<bufl+shift; ub++) if (*ub!=0) return sigl; + /* now start the overlapped part; bufl has been padded, so the */ + /* comparison can go for the full length of bufr, which is a */ + /* multiple of 4 bytes */ + for (uc=bufr; ; uc+=4, ub+=4) { + if (UINTAT(uc)!=UINTAT(ub)) { /* mismatch found */ + for (;; uc++, ub++) { /* check from left [little-endian?] */ + if (*ub>*uc) return sigl; /* difference found */ + if (*ub<*uc) return sigr; /* .. */ + } + } /* mismatch */ + if (uc==bufr+QUAD*2+DECPMAX-4) break; /* all checked */ + } + } /* shift>0 */ + + else { /* shift<0) .. RHS is to left of LHS; mirror shift>0 */ + uc=bufr; /* RHS pointer */ + /* pad bufr so right-aligned; most shifts will fit in 8 */ + UINTAT(bufr+DECPMAX+QUAD*2)=0; /* add eight zeros */ + UINTAT(bufr+DECPMAX+QUAD*2+4)=0; /* .. */ + if (shift<-8) { + /* more than eight; fill the rest, and also worth doing the */ + /* lead-in by fours */ + uByte *up; /* work */ + uByte *upend=bufr+DECPMAX+QUAD*2-shift; + for (up=bufr+DECPMAX+QUAD*2+8; up<upend; up+=4) UINTAT(up)=0; + /* [pads up to 36 in all for Quad] */ + for (;; uc+=4) { + if (UINTAT(uc)!=0) return sigr; + if (uc+4>bufr-shift-4) break; + } + } + /* check remaining leading digits */ + for (; uc<bufr-shift; uc++) if (*uc!=0) return sigr; + /* now start the overlapped part; bufr has been padded, so the */ + /* comparison can go for the full length of bufl, which is a */ + /* multiple of 4 bytes */ + for (ub=bufl; ; ub+=4, uc+=4) { + if (UINTAT(ub)!=UINTAT(uc)) { /* mismatch found */ + for (;; ub++, uc++) { /* check from left [little-endian?] */ + if (*ub>*uc) return sigl; /* difference found */ + if (*ub<*uc) return sigr; /* .. */ + } + } /* mismatch */ + if (ub==bufl+QUAD*2+DECPMAX-4) break; /* all checked */ + } + } /* shift<0 */ + + /* Here when compare equal */ + if (!tot) return 0; /* numerically equal */ + /* total ordering .. exponent matters */ + if (shift>0) return sigl; /* total order by exponent */ + if (shift<0) return sigr; /* .. */ + return 0; + } /* decNumCompare */ + +/* ------------------------------------------------------------------ */ +/* decToInt32 -- local routine to effect ToInteger conversions */ +/* */ +/* df is the decFloat to convert */ +/* set is the context */ +/* rmode is the rounding mode to use */ +/* exact is 1 if Inexact should be signalled */ +/* unsign is 1 if the result a uInt, 0 if an Int (cast to uInt) */ +/* returns 32-bit result as a uInt */ +/* */ +/* Invalid is set is df is a NaN, is infinite, or is out-of-range; in */ +/* these cases 0 is returned. */ +/* ------------------------------------------------------------------ */ +static uInt decToInt32(const decFloat *df, decContext *set, + enum rounding rmode, Flag exact, Flag unsign) { + Int exp; /* exponent */ + uInt sourhi, sourpen, sourlo; /* top word from source decFloat .. */ + uInt hi, lo; /* .. penultimate, least, etc. */ + decFloat zero, result; /* work */ + Int i; /* .. */ + + /* Start decoding the argument */ + sourhi=DFWORD(df, 0); /* top word */ + exp=DECCOMBEXP[sourhi>>26]; /* get exponent high bits (in place) */ + if (EXPISSPECIAL(exp)) { /* is special? */ + set->status|=DEC_Invalid_operation; /* signal */ + return 0; + } + + /* Here when the argument is finite */ + if (GETEXPUN(df)==0) result=*df; /* already a true integer */ + else { /* need to round to integer */ + enum rounding saveround; /* saver */ + uInt savestatus; /* .. */ + saveround=set->round; /* save rounding mode .. */ + savestatus=set->status; /* .. and status */ + set->round=rmode; /* set mode */ + decFloatZero(&zero); /* make 0E+0 */ + set->status=0; /* clear */ + decFloatQuantize(&result, df, &zero, set); /* [this may fail] */ + set->round=saveround; /* restore rounding mode .. */ + if (exact) set->status|=savestatus; /* include Inexact */ + else set->status=savestatus; /* .. or just original status */ + } + + /* only the last four declets of the coefficient can contain */ + /* non-zero; check for others (and also NaN or Infinity from the */ + /* Quantize) first (see DFISZERO for explanation): */ + /* decFloatShow(&result, "sofar"); */ + #if DOUBLE + if ((DFWORD(&result, 0)&0x1c03ff00)!=0 + || (DFWORD(&result, 0)&0x60000000)==0x60000000) { + #elif QUAD + if ((DFWORD(&result, 2)&0xffffff00)!=0 + || DFWORD(&result, 1)!=0 + || (DFWORD(&result, 0)&0x1c003fff)!=0 + || (DFWORD(&result, 0)&0x60000000)==0x60000000) { + #endif + set->status|=DEC_Invalid_operation; /* Invalid or out of range */ + return 0; + } + /* get last twelve digits of the coefficent into hi & ho, base */ + /* 10**9 (see GETCOEFFBILL): */ + sourlo=DFWORD(&result, DECWORDS-1); + lo=DPD2BIN0[sourlo&0x3ff] + +DPD2BINK[(sourlo>>10)&0x3ff] + +DPD2BINM[(sourlo>>20)&0x3ff]; + sourpen=DFWORD(&result, DECWORDS-2); + hi=DPD2BIN0[((sourpen<<2) | (sourlo>>30))&0x3ff]; + + /* according to request, check range carefully */ + if (unsign) { + if (hi>4 || (hi==4 && lo>294967295) || (hi+lo!=0 && DFISSIGNED(&result))) { + set->status|=DEC_Invalid_operation; /* out of range */ + return 0; + } + return hi*BILLION+lo; + } + /* signed */ + if (hi>2 || (hi==2 && lo>147483647)) { + /* handle the usual edge case */ + if (lo==147483648 && hi==2 && DFISSIGNED(&result)) return 0x80000000; + set->status|=DEC_Invalid_operation; /* truly out of range */ + return 0; + } + i=hi*BILLION+lo; + if (DFISSIGNED(&result)) i=-i; + return (uInt)i; + } /* decToInt32 */ + +/* ------------------------------------------------------------------ */ +/* decToIntegral -- local routine to effect ToIntegral value */ +/* */ +/* result gets the result */ +/* df is the decFloat to round */ +/* set is the context */ +/* rmode is the rounding mode to use */ +/* exact is 1 if Inexact should be signalled */ +/* returns result */ +/* ------------------------------------------------------------------ */ +static decFloat * decToIntegral(decFloat *result, const decFloat *df, + decContext *set, enum rounding rmode, + Flag exact) { + Int exp; /* exponent */ + uInt sourhi; /* top word from source decFloat */ + enum rounding saveround; /* saver */ + uInt savestatus; /* .. */ + decFloat zero; /* work */ + + /* Start decoding the argument */ + sourhi=DFWORD(df, 0); /* top word */ + exp=DECCOMBEXP[sourhi>>26]; /* get exponent high bits (in place) */ + + if (EXPISSPECIAL(exp)) { /* is special? */ + /* NaNs are handled as usual */ + if (DFISNAN(df)) return decNaNs(result, df, NULL, set); + /* must be infinite; return canonical infinity with sign of df */ + return decInfinity(result, df); + } + + /* Here when the argument is finite */ + /* complete extraction of the exponent */ + exp+=GETECON(df)-DECBIAS; /* .. + continuation and unbias */ + + if (exp>=0) return decCanonical(result, df); /* already integral */ + + saveround=set->round; /* save rounding mode .. */ + savestatus=set->status; /* .. and status */ + set->round=rmode; /* set mode */ + decFloatZero(&zero); /* make 0E+0 */ + decFloatQuantize(result, df, &zero, set); /* 'integrate'; cannot fail */ + set->round=saveround; /* restore rounding mode .. */ + if (!exact) set->status=savestatus; /* .. and status, unless exact */ + return result; + } /* decToIntegral */ diff --git a/libdecnumber/decCommon.c b/libdecnumber/decCommon.c new file mode 100644 index 0000000..84e1b2a --- /dev/null +++ b/libdecnumber/decCommon.c @@ -0,0 +1,1771 @@ +/* Common code for fixed-size types in the decNumber C Library. + Copyright (C) 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* decCommon.c -- common code for all three fixed-size types */ +/* ------------------------------------------------------------------ */ +/* This module comprises code that is shared between all the formats */ +/* (decSingle, decDouble, and decQuad); it includes set and extract */ +/* of format components, widening, narrowing, and string conversions. */ +/* */ +/* Unlike decNumber, parameterization takes place at compile time */ +/* rather than at runtime. The parameters are set in the decDouble.c */ +/* (etc.) files, which then include this one to produce the compiled */ +/* code. The functions here, therefore, are code shared between */ +/* multiple formats. */ +/* ------------------------------------------------------------------ */ +/* Names here refer to decFloat rather than to decDouble, etc., and */ +/* the functions are in strict alphabetical order. */ +/* Constants, tables, and debug function(s) are included only for QUAD */ +/* (which will always be compiled if DOUBLE or SINGLE are used). */ +/* */ +/* Whenever a decContext is used, only the status may be set (using */ +/* OR) or the rounding mode read; all other fields are ignored and */ +/* untouched. */ + +/* names for simpler testing and default context */ +#if DECPMAX==7 + #define SINGLE 1 + #define DOUBLE 0 + #define QUAD 0 + #define DEFCONTEXT DEC_INIT_DECIMAL32 +#elif DECPMAX==16 + #define SINGLE 0 + #define DOUBLE 1 + #define QUAD 0 + #define DEFCONTEXT DEC_INIT_DECIMAL64 +#elif DECPMAX==34 + #define SINGLE 0 + #define DOUBLE 0 + #define QUAD 1 + #define DEFCONTEXT DEC_INIT_DECIMAL128 +#else + #error Unexpected DECPMAX value +#endif + +/* Assertions */ + +#if DECPMAX!=7 && DECPMAX!=16 && DECPMAX!=34 + #error Unexpected Pmax (DECPMAX) value for this module +#endif + +/* Assert facts about digit characters, etc. */ +#if ('9'&0x0f)!=9 + #error This module assumes characters are of the form 0b....nnnn + /* where .... are don't care 4 bits and nnnn is 0000 through 1001 */ +#endif +#if ('9'&0xf0)==('.'&0xf0) + #error This module assumes '.' has a different mask than a digit +#endif + +/* Assert ToString lay-out conditions */ +#if DECSTRING<DECPMAX+9 + #error ToString needs at least 8 characters for lead-in and dot +#endif +#if DECPMAX+DECEMAXD+5 > DECSTRING + #error Exponent form can be too long for ToString to lay out safely +#endif +#if DECEMAXD > 4 + #error Exponent form is too long for ToString to lay out + /* Note: code for up to 9 digits exists in archives [decOct] */ +#endif + +/* Private functions used here and possibly in decBasic.c, etc. */ +static decFloat * decFinalize(decFloat *, bcdnum *, decContext *); +static Flag decBiStr(const char *, const char *, const char *); + +/* Macros and private tables; those which are not format-dependent */ +/* are only included if decQuad is being built. */ + +/* ------------------------------------------------------------------ */ +/* Combination field lookup tables (uInts to save measurable work) */ +/* */ +/* DECCOMBEXP - 2 most-significant-bits of exponent (00, 01, or */ +/* 10), shifted left for format, or DECFLOAT_Inf/NaN */ +/* DECCOMBWEXP - The same, for the next-wider format (unless QUAD) */ +/* DECCOMBMSD - 4-bit most-significant-digit */ +/* [0 if the index is a special (Infinity or NaN)] */ +/* DECCOMBFROM - 5-bit combination field from EXP top bits and MSD */ +/* (placed in uInt so no shift is needed) */ +/* */ +/* DECCOMBEXP, DECCOMBWEXP, and DECCOMBMSD are indexed by the sign */ +/* and 5-bit combination field (0-63, the second half of the table */ +/* identical to the first half) */ +/* DECCOMBFROM is indexed by expTopTwoBits*16 + msd */ +/* */ +/* DECCOMBMSD and DECCOMBFROM are not format-dependent and so are */ +/* only included once, when QUAD is being built */ +/* ------------------------------------------------------------------ */ +static const uInt DECCOMBEXP[64]={ + 0, 0, 0, 0, 0, 0, 0, 0, + 1<<DECECONL, 1<<DECECONL, 1<<DECECONL, 1<<DECECONL, + 1<<DECECONL, 1<<DECECONL, 1<<DECECONL, 1<<DECECONL, + 2<<DECECONL, 2<<DECECONL, 2<<DECECONL, 2<<DECECONL, + 2<<DECECONL, 2<<DECECONL, 2<<DECECONL, 2<<DECECONL, + 0, 0, 1<<DECECONL, 1<<DECECONL, + 2<<DECECONL, 2<<DECECONL, DECFLOAT_Inf, DECFLOAT_NaN, + 0, 0, 0, 0, 0, 0, 0, 0, + 1<<DECECONL, 1<<DECECONL, 1<<DECECONL, 1<<DECECONL, + 1<<DECECONL, 1<<DECECONL, 1<<DECECONL, 1<<DECECONL, + 2<<DECECONL, 2<<DECECONL, 2<<DECECONL, 2<<DECECONL, + 2<<DECECONL, 2<<DECECONL, 2<<DECECONL, 2<<DECECONL, + 0, 0, 1<<DECECONL, 1<<DECECONL, + 2<<DECECONL, 2<<DECECONL, DECFLOAT_Inf, DECFLOAT_NaN}; +#if !QUAD +static const uInt DECCOMBWEXP[64]={ + 0, 0, 0, 0, 0, 0, 0, 0, + 1<<DECWECONL, 1<<DECWECONL, 1<<DECWECONL, 1<<DECWECONL, + 1<<DECWECONL, 1<<DECWECONL, 1<<DECWECONL, 1<<DECWECONL, + 2<<DECWECONL, 2<<DECWECONL, 2<<DECWECONL, 2<<DECWECONL, + 2<<DECWECONL, 2<<DECWECONL, 2<<DECWECONL, 2<<DECWECONL, + 0, 0, 1<<DECWECONL, 1<<DECWECONL, + 2<<DECWECONL, 2<<DECWECONL, DECFLOAT_Inf, DECFLOAT_NaN, + 0, 0, 0, 0, 0, 0, 0, 0, + 1<<DECWECONL, 1<<DECWECONL, 1<<DECWECONL, 1<<DECWECONL, + 1<<DECWECONL, 1<<DECWECONL, 1<<DECWECONL, 1<<DECWECONL, + 2<<DECWECONL, 2<<DECWECONL, 2<<DECWECONL, 2<<DECWECONL, + 2<<DECWECONL, 2<<DECWECONL, 2<<DECWECONL, 2<<DECWECONL, + 0, 0, 1<<DECWECONL, 1<<DECWECONL, + 2<<DECWECONL, 2<<DECWECONL, DECFLOAT_Inf, DECFLOAT_NaN}; +#endif + +#if QUAD +const uInt DECCOMBMSD[64]={ + 0, 1, 2, 3, 4, 5, 6, 7, 0, 1, 2, 3, 4, 5, 6, 7, + 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 8, 9, 8, 9, 0, 1, + 0, 1, 2, 3, 4, 5, 6, 7, 0, 1, 2, 3, 4, 5, 6, 7, + 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 8, 9, 8, 9, 0, 0}; + +const uInt DECCOMBFROM[48]={ + 0x00000000, 0x04000000, 0x08000000, 0x0C000000, 0x10000000, 0x14000000, + 0x18000000, 0x1C000000, 0x60000000, 0x64000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x20000000, 0x24000000, + 0x28000000, 0x2C000000, 0x30000000, 0x34000000, 0x38000000, 0x3C000000, + 0x68000000, 0x6C000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x40000000, 0x44000000, 0x48000000, 0x4C000000, + 0x50000000, 0x54000000, 0x58000000, 0x5C000000, 0x70000000, 0x74000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000}; + +/* ------------------------------------------------------------------ */ +/* Request and include the tables to use for conversions */ +/* ------------------------------------------------------------------ */ +#define DEC_BCD2DPD 1 /* 0-0x999 -> DPD */ +#define DEC_BIN2DPD 1 /* 0-999 -> DPD */ +#define DEC_BIN2BCD8 1 /* 0-999 -> ddd, len */ +#define DEC_DPD2BCD8 1 /* DPD -> ddd, len */ +#define DEC_DPD2BIN 1 /* DPD -> 0-999 */ +#define DEC_DPD2BINK 1 /* DPD -> 0-999000 */ +#define DEC_DPD2BINM 1 /* DPD -> 0-999000000 */ +#include "decDPD.h" /* source of the lookup tables */ + +#endif + +/* ----------------------------------------------------------------- */ +/* decBiStr -- compare string with pairwise options */ +/* */ +/* targ is the string to compare */ +/* str1 is one of the strings to compare against (length may be 0) */ +/* str2 is the other; it must be the same length as str1 */ +/* */ +/* returns 1 if strings compare equal, (that is, targ is the same */ +/* length as str1 and str2, and each character of targ is in one */ +/* of str1 or str2 in the corresponding position), or 0 otherwise */ +/* */ +/* This is used for generic caseless compare, including the awkward */ +/* case of the Turkish dotted and dotless Is. Use as (for example): */ +/* if (decBiStr(test, "mike", "MIKE")) ... */ +/* ----------------------------------------------------------------- */ +static Flag decBiStr(const char *targ, const char *str1, const char *str2) { + for (;;targ++, str1++, str2++) { + if (*targ!=*str1 && *targ!=*str2) return 0; + /* *targ has a match in one (or both, if terminator) */ + if (*targ=='\0') break; + } /* forever */ + return 1; + } /* decBiStr */ + +/* ------------------------------------------------------------------ */ +/* decFinalize -- adjust and store a final result */ +/* */ +/* df is the decFloat format number which gets the final result */ +/* num is the descriptor of the number to be checked and encoded */ +/* [its values, including the coefficient, may be modified] */ +/* set is the context to use */ +/* returns df */ +/* */ +/* The num descriptor may point to a bcd8 string of any length; this */ +/* string may have leading insignificant zeros. If it has more than */ +/* DECPMAX digits then the final digit can be a round-for-reround */ +/* digit (i.e., it may include a sticky bit residue). */ +/* */ +/* The exponent (q) may be one of the codes for a special value and */ +/* can be up to 999999999 for conversion from string. */ +/* */ +/* No error is possible, but Inexact, Underflow, and/or Overflow may */ +/* be set. */ +/* ------------------------------------------------------------------ */ +/* Constant whose size varies with format; also the check for surprises */ +static uByte allnines[DECPMAX]= +#if SINGLE + {9, 9, 9, 9, 9, 9, 9}; +#elif DOUBLE + {9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9}; +#elif QUAD + {9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, + 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9}; +#endif + +static decFloat * decFinalize(decFloat *df, bcdnum *num, + decContext *set) { + uByte *ub; /* work */ + uInt dpd; /* .. */ + uByte *umsd=num->msd; /* local copy */ + uByte *ulsd=num->lsd; /* .. */ + uInt encode; /* encoding accumulator */ + Int length; /* coefficient length */ + + #if DECCHECK + Int clen=ulsd-umsd+1; + #if QUAD + #define COEXTRA 2 /* extra-long coefficent */ + #else + #define COEXTRA 0 + #endif + if (clen<1 || clen>DECPMAX*3+2+COEXTRA) + printf("decFinalize: suspect coefficient [length=%ld]\n", (LI)clen); + if (num->sign!=0 && num->sign!=DECFLOAT_Sign) + printf("decFinalize: bad sign [%08lx]\n", (LI)num->sign); + if (!EXPISSPECIAL(num->exponent) + && (num->exponent>1999999999 || num->exponent<-1999999999)) + printf("decFinalize: improbable exponent [%ld]\n", (LI)num->exponent); + /* decShowNum(num, "final"); */ + #endif + + /* A special will have an 'exponent' which is very positive and a */ + /* coefficient < DECPMAX */ + length=(uInt)(ulsd-umsd+1); /* coefficient length */ + + if (!NUMISSPECIAL(num)) { + Int drop; /* digits to be dropped */ + /* skip leading insignificant zeros to calculate an exact length */ + /* [this is quite expensive] */ + if (*umsd==0) { + for (; UINTAT(umsd)==0 && umsd+3<ulsd;) umsd+=4; + for (; *umsd==0 && umsd<ulsd;) umsd++; + length=ulsd-umsd+1; /* recalculate */ + } + drop=MAXI(length-DECPMAX, DECQTINY-num->exponent); + /* drop can now be > digits for bottom-clamp (subnormal) cases */ + if (drop>0) { /* rounding needed */ + /* (decFloatQuantize has very similar code to this, so any */ + /* changes may need to be made there, too) */ + uByte *roundat; /* -> re-round digit */ + uByte reround; /* reround value */ + /* printf("Rounding; drop=%ld\n", (LI)drop); */ + + num->exponent+=drop; /* always update exponent */ + + /* Three cases here: */ + /* 1. new LSD is in coefficient (almost always) */ + /* 2. new LSD is digit to left of coefficient (so MSD is */ + /* round-for-reround digit) */ + /* 3. new LSD is to left of case 2 (whole coefficient is sticky) */ + /* [duplicate check-stickies code to save a test] */ + /* [by-digit check for stickies as runs of zeros are rare] */ + if (drop<length) { /* NB lengths not addresses */ + roundat=umsd+length-drop; + reround=*roundat; + for (ub=roundat+1; ub<=ulsd; ub++) { + if (*ub!=0) { /* non-zero to be discarded */ + reround=DECSTICKYTAB[reround]; /* apply sticky bit */ + break; /* [remainder don't-care] */ + } + } /* check stickies */ + ulsd=roundat-1; /* new LSD */ + } + else { /* edge case */ + if (drop==length) { + roundat=umsd; + reround=*roundat; + } + else { + roundat=umsd-1; + reround=0; + } + for (ub=roundat+1; ub<=ulsd; ub++) { + if (*ub!=0) { /* non-zero to be discarded */ + reround=DECSTICKYTAB[reround]; /* apply sticky bit */ + break; /* [remainder don't-care] */ + } + } /* check stickies */ + *umsd=0; /* coefficient is a 0 */ + ulsd=umsd; /* .. */ + } + + if (reround!=0) { /* discarding non-zero */ + uInt bump=0; + set->status|=DEC_Inexact; + /* if adjusted exponent [exp+digits-1] is < EMIN then num is */ + /* subnormal -- so raise Underflow */ + if (num->exponent<DECEMIN && (num->exponent+(ulsd-umsd+1)-1)<DECEMIN) + set->status|=DEC_Underflow; + + /* next decide whether increment of the coefficient is needed */ + if (set->round==DEC_ROUND_HALF_EVEN) { /* fastpath slowest case */ + if (reround>5) bump=1; /* >0.5 goes up */ + else if (reround==5) /* exactly 0.5000 .. */ + bump=*ulsd & 0x01; /* .. up iff [new] lsd is odd */ + } /* r-h-e */ + else switch (set->round) { + case DEC_ROUND_DOWN: { + /* no change */ + break;} /* r-d */ + case DEC_ROUND_HALF_DOWN: { + if (reround>5) bump=1; + break;} /* r-h-d */ + case DEC_ROUND_HALF_UP: { + if (reround>=5) bump=1; + break;} /* r-h-u */ + case DEC_ROUND_UP: { + if (reround>0) bump=1; + break;} /* r-u */ + case DEC_ROUND_CEILING: { + /* same as _UP for positive numbers, and as _DOWN for negatives */ + if (!num->sign && reround>0) bump=1; + break;} /* r-c */ + case DEC_ROUND_FLOOR: { + /* same as _UP for negative numbers, and as _DOWN for positive */ + /* [negative reround cannot occur on 0] */ + if (num->sign && reround>0) bump=1; + break;} /* r-f */ + case DEC_ROUND_05UP: { + if (reround>0) { /* anything out there is 'sticky' */ + /* bump iff lsd=0 or 5; this cannot carry so it could be */ + /* effected immediately with no bump -- but the code */ + /* is clearer if this is done the same way as the others */ + if (*ulsd==0 || *ulsd==5) bump=1; + } + break;} /* r-r */ + default: { /* e.g., DEC_ROUND_MAX */ + set->status|=DEC_Invalid_context; + #if DECCHECK + printf("Unknown rounding mode: %ld\n", (LI)set->round); + #endif + break;} + } /* switch (not r-h-e) */ + /* printf("ReRound: %ld bump: %ld\n", (LI)reround, (LI)bump); */ + + if (bump!=0) { /* need increment */ + /* increment the coefficient; this might end up with 1000... */ + /* (after the all nines case) */ + ub=ulsd; + for(; ub-3>=umsd && UINTAT(ub-3)==0x09090909; ub-=4) UINTAT(ub-3)=0; + /* [note ub could now be to left of msd, and it is not safe */ + /* to write to the the left of the msd] */ + /* now at most 3 digits left to non-9 (usually just the one) */ + for (; ub>=umsd; *ub=0, ub--) { + if (*ub==9) continue; /* carry */ + *ub+=1; + break; + } + if (ub<umsd) { /* had all-nines */ + *umsd=1; /* coefficient to 1000... */ + /* usually the 1000... coefficient can be used as-is */ + if ((ulsd-umsd+1)==DECPMAX) { + num->exponent++; + } + else { + /* if coefficient is shorter than Pmax then num is */ + /* subnormal, so extend it; this is safe as drop>0 */ + /* (or, if the coefficient was supplied above, it could */ + /* not be 9); this may make the result normal. */ + ulsd++; + *ulsd=0; + /* [exponent unchanged] */ + #if DECCHECK + if (num->exponent!=DECQTINY) /* sanity check */ + printf("decFinalize: bad all-nines extend [^%ld, %ld]\n", + (LI)num->exponent, (LI)(ulsd-umsd+1)); + #endif + } /* subnormal extend */ + } /* had all-nines */ + } /* bump needed */ + } /* inexact rounding */ + + length=ulsd-umsd+1; /* recalculate (may be <DECPMAX) */ + } /* need round (drop>0) */ + + /* The coefficient will now fit and has final length unless overflow */ + /* decShowNum(num, "rounded"); */ + + /* if exponent is >=emax may have to clamp, overflow, or fold-down */ + if (num->exponent>DECEMAX-(DECPMAX-1)) { /* is edge case */ + /* printf("overflow checks...\n"); */ + if (*ulsd==0 && ulsd==umsd) { /* have zero */ + num->exponent=DECEMAX-(DECPMAX-1); /* clamp to max */ + } + else if ((num->exponent+length-1)>DECEMAX) { /* > Nmax */ + /* Overflow -- these could go straight to encoding, here, but */ + /* instead num is adjusted to keep the code cleaner */ + Flag needmax=0; /* 1 for finite result */ + set->status|=(DEC_Overflow | DEC_Inexact); + switch (set->round) { + case DEC_ROUND_DOWN: { + needmax=1; /* never Infinity */ + break;} /* r-d */ + case DEC_ROUND_05UP: { + needmax=1; /* never Infinity */ + break;} /* r-05 */ + case DEC_ROUND_CEILING: { + if (num->sign) needmax=1; /* Infinity iff non-negative */ + break;} /* r-c */ + case DEC_ROUND_FLOOR: { + if (!num->sign) needmax=1; /* Infinity iff negative */ + break;} /* r-f */ + default: break; /* Infinity in all other cases */ + } + if (!needmax) { /* easy .. set Infinity */ + num->exponent=DECFLOAT_Inf; + *umsd=0; /* be clean: coefficient to 0 */ + ulsd=umsd; /* .. */ + } + else { /* return Nmax */ + umsd=allnines; /* use constant array */ + ulsd=allnines+DECPMAX-1; + num->exponent=DECEMAX-(DECPMAX-1); + } + } + else { /* no overflow but non-zero and may have to fold-down */ + Int shift=num->exponent-(DECEMAX-(DECPMAX-1)); + if (shift>0) { /* fold-down needed */ + /* fold down needed; must copy to buffer in order to pad */ + /* with zeros safely; fortunately this is not the worst case */ + /* path because cannot have had a round */ + uByte buffer[ROUNDUP(DECPMAX+3, 4)]; /* [+3 allows uInt padding] */ + uByte *s=umsd; /* source */ + uByte *t=buffer; /* safe target */ + uByte *tlsd=buffer+(ulsd-umsd)+shift; /* target LSD */ + /* printf("folddown shift=%ld\n", (LI)shift); */ + for (; s<=ulsd; s+=4, t+=4) UINTAT(t)=UINTAT(s); + for (t=tlsd-shift+1; t<=tlsd; t+=4) UINTAT(t)=0; /* pad */ + num->exponent-=shift; + umsd=buffer; + ulsd=tlsd; + } + } /* fold-down? */ + length=ulsd-umsd+1; /* recalculate length */ + } /* high-end edge case */ + } /* finite number */ + + /*------------------------------------------------------------------*/ + /* At this point the result will properly fit the decFloat */ + /* encoding, and it can be encoded with no possibility of error */ + /*------------------------------------------------------------------*/ + /* Following code does not alter coefficient (could be allnines array) */ + + if (length==DECPMAX) { + return decFloatFromBCD(df, num->exponent, umsd, num->sign); + } + + /* Here when length is short */ + if (!NUMISSPECIAL(num)) { /* is still finite */ + /* encode the combination field and exponent continuation */ + uInt uexp=(uInt)(num->exponent+DECBIAS); /* biased exponent */ + uInt code=(uexp>>DECECONL)<<4; /* top two bits of exp */ + /* [msd=0] */ + /* look up the combination field and make high word */ + encode=DECCOMBFROM[code]; /* indexed by (0-2)*16+msd */ + encode|=(uexp<<(32-6-DECECONL)) & 0x03ffffff; /* exponent continuation */ + } + else encode=num->exponent; /* special [already in word] */ + /* [coefficient length here will be < DECPMAX] */ + + encode|=num->sign; /* add sign */ + + /* private macro to extract a declet, n (where 0<=n<DECLETS and 0 */ + /* refers to the declet from the least significant three digits) */ + /* and put the corresponding DPD code into dpd. Access to umsd and */ + /* ulsd (pointers to the most and least significant digit of the */ + /* variable-length coefficient) is assumed, along with use of a */ + /* working pointer, uInt *ub. */ + /* As not full-length then chances are there are many leading zeros */ + /* [and there may be a partial triad] */ + #define getDPD(dpd, n) ub=ulsd-(3*(n))-2; \ + if (ub<umsd-2) dpd=0; \ + else if (ub>=umsd) dpd=BCD2DPD[(*ub*256)+(*(ub+1)*16)+*(ub+2)]; \ + else {dpd=*(ub+2); if (ub+1==umsd) dpd+=*(ub+1)*16; dpd=BCD2DPD[dpd];} + + /* place the declets in the encoding words and copy to result (df), */ + /* according to endianness; in all cases complete the sign word */ + /* first */ + #if DECPMAX==7 + getDPD(dpd, 1); + encode|=dpd<<10; + getDPD(dpd, 0); + encode|=dpd; + DFWORD(df, 0)=encode; /* just the one word */ + + #elif DECPMAX==16 + getDPD(dpd, 4); encode|=dpd<<8; + getDPD(dpd, 3); encode|=dpd>>2; + DFWORD(df, 0)=encode; + encode=dpd<<30; + getDPD(dpd, 2); encode|=dpd<<20; + getDPD(dpd, 1); encode|=dpd<<10; + getDPD(dpd, 0); encode|=dpd; + DFWORD(df, 1)=encode; + + #elif DECPMAX==34 + getDPD(dpd,10); encode|=dpd<<4; + getDPD(dpd, 9); encode|=dpd>>6; + DFWORD(df, 0)=encode; + + encode=dpd<<26; + getDPD(dpd, 8); encode|=dpd<<16; + getDPD(dpd, 7); encode|=dpd<<6; + getDPD(dpd, 6); encode|=dpd>>4; + DFWORD(df, 1)=encode; + + encode=dpd<<28; + getDPD(dpd, 5); encode|=dpd<<18; + getDPD(dpd, 4); encode|=dpd<<8; + getDPD(dpd, 3); encode|=dpd>>2; + DFWORD(df, 2)=encode; + + encode=dpd<<30; + getDPD(dpd, 2); encode|=dpd<<20; + getDPD(dpd, 1); encode|=dpd<<10; + getDPD(dpd, 0); encode|=dpd; + DFWORD(df, 3)=encode; + #endif + + /* printf("Status: %08lx\n", (LI)set->status); */ + /* decFloatShow(df, "final"); */ + return df; + } /* decFinalize */ + +/* ------------------------------------------------------------------ */ +/* decFloatFromBCD -- set decFloat from exponent, BCD8, and sign */ +/* */ +/* df is the target decFloat */ +/* exp is the in-range unbiased exponent, q, or a special value in */ +/* the form returned by decFloatGetExponent */ +/* bcdar holds DECPMAX digits to set the coefficient from, one */ +/* digit in each byte (BCD8 encoding); the first (MSD) is ignored */ +/* if df is a NaN; all are ignored if df is infinite. */ +/* All bytes must be in 0-9; results undefined otherwise. */ +/* sig is DECFLOAT_Sign to set the sign bit, 0 otherwise */ +/* returns df, which will be canonical */ +/* */ +/* No error is possible, and no status will be set. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatFromBCD(decFloat *df, Int exp, const uByte *bcdar, + Int sig) { + uInt encode, dpd; /* work */ + const uByte *ub; /* .. */ + + if (EXPISSPECIAL(exp)) encode=exp|sig;/* specials already encoded */ + else { /* is finite */ + /* encode the combination field and exponent continuation */ + uInt uexp=(uInt)(exp+DECBIAS); /* biased exponent */ + uInt code=(uexp>>DECECONL)<<4; /* top two bits of exp */ + code+=bcdar[0]; /* add msd */ + /* look up the combination field and make high word */ + encode=DECCOMBFROM[code]|sig; /* indexed by (0-2)*16+msd */ + encode|=(uexp<<(32-6-DECECONL)) & 0x03ffffff; /* exponent continuation */ + } + + /* private macro to extract a declet, n (where 0<=n<DECLETS and 0 */ + /* refers to the declet from the least significant three digits) */ + /* and put the corresponding DPD code into dpd. */ + /* Use of a working pointer, uInt *ub, is assumed. */ + + #define getDPDf(dpd, n) ub=bcdar+DECPMAX-1-(3*(n))-2; \ + dpd=BCD2DPD[(*ub*256)+(*(ub+1)*16)+*(ub+2)]; + + /* place the declets in the encoding words and copy to result (df), */ + /* according to endianness; in all cases complete the sign word */ + /* first */ + #if DECPMAX==7 + getDPDf(dpd, 1); + encode|=dpd<<10; + getDPDf(dpd, 0); + encode|=dpd; + DFWORD(df, 0)=encode; /* just the one word */ + + #elif DECPMAX==16 + getDPDf(dpd, 4); encode|=dpd<<8; + getDPDf(dpd, 3); encode|=dpd>>2; + DFWORD(df, 0)=encode; + encode=dpd<<30; + getDPDf(dpd, 2); encode|=dpd<<20; + getDPDf(dpd, 1); encode|=dpd<<10; + getDPDf(dpd, 0); encode|=dpd; + DFWORD(df, 1)=encode; + + #elif DECPMAX==34 + getDPDf(dpd,10); encode|=dpd<<4; + getDPDf(dpd, 9); encode|=dpd>>6; + DFWORD(df, 0)=encode; + + encode=dpd<<26; + getDPDf(dpd, 8); encode|=dpd<<16; + getDPDf(dpd, 7); encode|=dpd<<6; + getDPDf(dpd, 6); encode|=dpd>>4; + DFWORD(df, 1)=encode; + + encode=dpd<<28; + getDPDf(dpd, 5); encode|=dpd<<18; + getDPDf(dpd, 4); encode|=dpd<<8; + getDPDf(dpd, 3); encode|=dpd>>2; + DFWORD(df, 2)=encode; + + encode=dpd<<30; + getDPDf(dpd, 2); encode|=dpd<<20; + getDPDf(dpd, 1); encode|=dpd<<10; + getDPDf(dpd, 0); encode|=dpd; + DFWORD(df, 3)=encode; + #endif + /* decFloatShow(df, "final"); */ + return df; + } /* decFloatFromBCD */ + +/* ------------------------------------------------------------------ */ +/* decFloatFromPacked -- set decFloat from exponent and packed BCD */ +/* */ +/* df is the target decFloat */ +/* exp is the in-range unbiased exponent, q, or a special value in */ +/* the form returned by decFloatGetExponent */ +/* packed holds DECPMAX packed decimal digits plus a sign nibble */ +/* (all 6 codes are OK); the first (MSD) is ignored if df is a NaN */ +/* and all except sign are ignored if df is infinite. For DOUBLE */ +/* and QUAD the first (pad) nibble is also ignored in all cases. */ +/* All coefficient nibbles must be in 0-9 and sign in A-F; results */ +/* are undefined otherwise. */ +/* returns df, which will be canonical */ +/* */ +/* No error is possible, and no status will be set. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatFromPacked(decFloat *df, Int exp, const uByte *packed) { + uByte bcdar[DECPMAX+2]; /* work [+1 for pad, +1 for sign] */ + const uByte *ip; /* .. */ + uByte *op; /* .. */ + Int sig=0; /* sign */ + + /* expand coefficient and sign to BCDAR */ + #if SINGLE + op=bcdar+1; /* no pad digit */ + #else + op=bcdar; /* first (pad) digit ignored */ + #endif + for (ip=packed; ip<packed+((DECPMAX+2)/2); ip++) { + *op++=*ip>>4; + *op++=(uByte)(*ip&0x0f); /* [final nibble is sign] */ + } + op--; /* -> sign byte */ + if (*op==DECPMINUS || *op==DECPMINUSALT) sig=DECFLOAT_Sign; + + if (EXPISSPECIAL(exp)) { /* Infinity or NaN */ + if (!EXPISINF(exp)) bcdar[1]=0; /* a NaN: ignore MSD */ + else memset(bcdar+1, 0, DECPMAX); /* Infinite: coefficient to 0 */ + } + return decFloatFromBCD(df, exp, bcdar+1, sig); + } /* decFloatFromPacked */ + +/* ------------------------------------------------------------------ */ +/* decFloatFromString -- conversion from numeric string */ +/* */ +/* result is the decFloat format number which gets the result of */ +/* the conversion */ +/* *string is the character string which should contain a valid */ +/* number (which may be a special value), \0-terminated */ +/* If there are too many significant digits in the */ +/* coefficient it will be rounded. */ +/* set is the context */ +/* returns result */ +/* */ +/* The length of the coefficient and the size of the exponent are */ +/* checked by this routine, so the correct error (Underflow or */ +/* Overflow) can be reported or rounding applied, as necessary. */ +/* */ +/* There is no limit to the coefficient length for finite inputs; */ +/* NaN payloads must be integers with no more than DECPMAX-1 digits. */ +/* Exponents may have up to nine significant digits. */ +/* */ +/* If bad syntax is detected, the result will be a quiet NaN. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatFromString(decFloat *result, const char *string, + decContext *set) { + Int digits; /* count of digits in coefficient */ + const char *dotchar=NULL; /* where dot was found [NULL if none] */ + const char *cfirst=string; /* -> first character of decimal part */ + const char *c; /* work */ + uByte *ub; /* .. */ + bcdnum num; /* collects data for finishing */ + uInt error=DEC_Conversion_syntax; /* assume the worst */ + uByte buffer[ROUNDUP(DECSTRING+11, 8)]; /* room for most coefficents, */ + /* some common rounding, +3, & pad */ + #if DECTRACE + /* printf("FromString %s ...\n", string); */ + #endif + + for(;;) { /* once-only 'loop' */ + num.sign=0; /* assume non-negative */ + num.msd=buffer; /* MSD is here always */ + + /* detect and validate the coefficient, including any leading, */ + /* trailing, or embedded '.' */ + /* [could test four-at-a-time here (saving 10% for decQuads), */ + /* but that risks storage violation because the position of the */ + /* terminator is unknown] */ + for (c=string;; c++) { /* -> input character */ + if (((unsigned)(*c-'0'))<=9) continue; /* '0' through '9' is good */ + if (*c=='\0') break; /* most common non-digit */ + if (*c=='.') { + if (dotchar!=NULL) break; /* not first '.' */ + dotchar=c; /* record offset into decimal part */ + continue;} + if (c==string) { /* first in string... */ + if (*c=='-') { /* valid - sign */ + cfirst++; + num.sign=DECFLOAT_Sign; + continue;} + if (*c=='+') { /* valid + sign */ + cfirst++; + continue;} + } + /* *c is not a digit, terminator, or a valid +, -, or '.' */ + break; + } /* c loop */ + + digits=(uInt)(c-cfirst); /* digits (+1 if a dot) */ + + if (digits>0) { /* had digits and/or dot */ + const char *clast=c-1; /* note last coefficient char position */ + Int exp=0; /* exponent accumulator */ + if (*c!='\0') { /* something follows the coefficient */ + uInt edig; /* unsigned work */ + /* had some digits and more to come; expect E[+|-]nnn now */ + const char *firstexp; /* exponent first non-zero */ + if (*c!='E' && *c!='e') break; + c++; /* to (optional) sign */ + if (*c=='-' || *c=='+') c++; /* step over sign (c=clast+2) */ + if (*c=='\0') break; /* no digits! (e.g., '1.2E') */ + for (; *c=='0';) c++; /* skip leading zeros [even last] */ + firstexp=c; /* remember start [maybe '\0'] */ + /* gather exponent digits */ + edig=(uInt)*c-(uInt)'0'; + if (edig<=9) { /* [check not bad or terminator] */ + exp+=edig; /* avoid initial X10 */ + c++; + for (;; c++) { + edig=(uInt)*c-(uInt)'0'; + if (edig>9) break; + exp=exp*10+edig; + } + } + /* if not now on the '\0', *c must not be a digit */ + if (*c!='\0') break; + + /* (this next test must be after the syntax checks) */ + /* if definitely more than the possible digits for format then */ + /* the exponent may have wrapped, so simply set it to a certain */ + /* over/underflow value */ + if (c>firstexp+DECEMAXD) exp=DECEMAX*2; + if (*(clast+2)=='-') exp=-exp; /* was negative */ + } /* digits>0 */ + + if (dotchar!=NULL) { /* had a '.' */ + digits--; /* remove from digits count */ + if (digits==0) break; /* was dot alone: bad syntax */ + exp-=(Int)(clast-dotchar); /* adjust exponent */ + /* [the '.' can now be ignored] */ + } + num.exponent=exp; /* exponent is good; store it */ + + /* Here when whole string has been inspected and syntax is good */ + /* cfirst->first digit or dot, clast->last digit or dot */ + error=0; /* no error possible now */ + + /* if the number of digits in the coefficient will fit in buffer */ + /* then it can simply be converted to bcd8 and copied -- decFinalize */ + /* will take care of leading zeros and rounding; the buffer is big */ + /* enough for all canonical coefficients, including 0.00000nn... */ + ub=buffer; + if (digits<=(Int)(sizeof(buffer)-3)) { /* [-3 allows by-4s copy] */ + c=cfirst; + if (dotchar!=NULL) { /* a dot to worry about */ + if (*(c+1)=='.') { /* common canonical case */ + *ub++=(uByte)(*c-'0'); /* copy leading digit */ + c+=2; /* prepare to handle rest */ + } + else for (; c<=clast;) { /* '.' could be anywhere */ + /* as usual, go by fours when safe; NB it has been asserted */ + /* that a '.' does not have the same mask as a digit */ + if (c<=clast-3 /* safe for four */ + && (UINTAT(c)&0xf0f0f0f0)==CHARMASK) { /* test four */ + UINTAT(ub)=UINTAT(c)&0x0f0f0f0f; /* to BCD8 */ + ub+=4; + c+=4; + continue; + } + if (*c=='.') { /* found the dot */ + c++; /* step over it .. */ + break; /* .. and handle the rest */ + } + *ub++=(uByte)(*c++-'0'); + } + } /* had dot */ + /* Now no dot; do this by fours (where safe) */ + for (; c<=clast-3; c+=4, ub+=4) UINTAT(ub)=UINTAT(c)&0x0f0f0f0f; + for (; c<=clast; c++, ub++) *ub=(uByte)(*c-'0'); + num.lsd=buffer+digits-1; /* record new LSD */ + } /* fits */ + + else { /* too long for buffer */ + /* [This is a rare and unusual case; arbitrary-length input] */ + /* strip leading zeros [but leave final 0 if all 0's] */ + if (*cfirst=='.') cfirst++; /* step past dot at start */ + if (*cfirst=='0') { /* [cfirst always -> digit] */ + for (; cfirst<clast; cfirst++) { + if (*cfirst!='0') { /* non-zero found */ + if (*cfirst=='.') continue; /* [ignore] */ + break; /* done */ + } + digits--; /* 0 stripped */ + } /* cfirst */ + } /* at least one leading 0 */ + + /* the coefficient is now as short as possible, but may still */ + /* be too long; copy up to Pmax+1 digits to the buffer, then */ + /* just record any non-zeros (set round-for-reround digit) */ + for (c=cfirst; c<=clast && ub<=buffer+DECPMAX; c++) { + /* (see commentary just above) */ + if (c<=clast-3 /* safe for four */ + && (UINTAT(c)&0xf0f0f0f0)==CHARMASK) { /* four digits */ + UINTAT(ub)=UINTAT(c)&0x0f0f0f0f; /* to BCD8 */ + ub+=4; + c+=3; /* [will become 4] */ + continue; + } + if (*c=='.') continue; /* [ignore] */ + *ub++=(uByte)(*c-'0'); + } + ub--; /* -> LSD */ + for (; c<=clast; c++) { /* inspect remaining chars */ + if (*c!='0') { /* sticky bit needed */ + if (*c=='.') continue; /* [ignore] */ + *ub=DECSTICKYTAB[*ub]; /* update round-for-reround */ + break; /* no need to look at more */ + } + } + num.lsd=ub; /* record LSD */ + /* adjust exponent for dropped digits */ + num.exponent+=digits-(Int)(ub-buffer+1); + } /* too long for buffer */ + } /* digits or dot */ + + else { /* no digits or dot were found */ + if (*c=='\0') break; /* nothing to come is bad */ + /* only Infinities and NaNs are allowed, here */ + buffer[0]=0; /* default a coefficient of 0 */ + num.lsd=buffer; /* .. */ + if (decBiStr(c, "infinity", "INFINITY") + || decBiStr(c, "inf", "INF")) num.exponent=DECFLOAT_Inf; + else { /* should be a NaN */ + num.exponent=DECFLOAT_qNaN; /* assume quiet NaN */ + if (*c=='s' || *c=='S') { /* probably an sNaN */ + c++; + num.exponent=DECFLOAT_sNaN; /* assume is in fact sNaN */ + } + if (*c!='N' && *c!='n') break; /* check caseless "NaN" */ + c++; + if (*c!='a' && *c!='A') break; /* .. */ + c++; + if (*c!='N' && *c!='n') break; /* .. */ + c++; + /* now either nothing, or nnnn payload (no dots), expected */ + /* -> start of integer, and skip leading 0s [including plain 0] */ + for (cfirst=c; *cfirst=='0';) cfirst++; + if (*cfirst!='\0') { /* not empty or all-0, payload */ + /* payload found; check all valid digits and copy to buffer as bcd8 */ + ub=buffer; + for (c=cfirst;; c++, ub++) { + if ((unsigned)(*c-'0')>9) break; /* quit if not 0-9 */ + if (c-cfirst==DECPMAX-1) break; /* too many digits */ + *ub=(uByte)(*c-'0'); /* good bcd8 */ + } + if (*c!='\0') break; /* not all digits, or too many */ + num.lsd=ub-1; /* record new LSD */ + } + } /* NaN or sNaN */ + error=0; /* syntax is OK */ + break; /* done with specials */ + } /* digits=0 (special expected) */ + break; + } /* [for(;;) break] */ + + /* decShowNum(&num, "fromStr"); */ + + if (error!=0) { + set->status|=error; + num.exponent=DECFLOAT_qNaN; /* set up quiet NaN */ + num.sign=0; /* .. with 0 sign */ + buffer[0]=0; /* .. and coefficient */ + num.lsd=buffer; /* .. */ + /* decShowNum(&num, "oops"); */ + } + + /* decShowNum(&num, "dffs"); */ + decFinalize(result, &num, set); /* round, check, and lay out */ + /* decFloatShow(result, "fromString"); */ + return result; + } /* decFloatFromString */ + +/* ------------------------------------------------------------------ */ +/* decFloatFromWider -- conversion from next-wider format */ +/* */ +/* result is the decFloat format number which gets the result of */ +/* the conversion */ +/* wider is the decFloatWider format number which will be narrowed */ +/* set is the context */ +/* returns result */ +/* */ +/* Narrowing can cause rounding, overflow, etc., but not Invalid */ +/* operation (sNaNs are copied and do not signal). */ +/* ------------------------------------------------------------------ */ +/* narrow-to is not possible for decQuad format numbers; simply omit */ +#if !QUAD +decFloat * decFloatFromWider(decFloat *result, const decFloatWider *wider, + decContext *set) { + bcdnum num; /* collects data for finishing */ + uByte bcdar[DECWPMAX]; /* room for wider coefficient */ + uInt widerhi=DFWWORD(wider, 0); /* top word */ + Int exp; + + GETWCOEFF(wider, bcdar); + + num.msd=bcdar; /* MSD is here always */ + num.lsd=bcdar+DECWPMAX-1; /* LSD is here always */ + num.sign=widerhi&0x80000000; /* extract sign [DECFLOAT_Sign=Neg] */ + + /* decode the wider combination field to exponent */ + exp=DECCOMBWEXP[widerhi>>26]; /* decode from wider combination field */ + /* if it is a special there's nothing to do unless sNaN; if it's */ + /* finite then add the (wider) exponent continuation and unbias */ + if (EXPISSPECIAL(exp)) exp=widerhi&0x7e000000; /* include sNaN selector */ + else exp+=GETWECON(wider)-DECWBIAS; + num.exponent=exp; + + /* decShowNum(&num, "dffw"); */ + return decFinalize(result, &num, set);/* round, check, and lay out */ + } /* decFloatFromWider */ +#endif + +/* ------------------------------------------------------------------ */ +/* decFloatGetCoefficient -- get coefficient as BCD8 */ +/* */ +/* df is the decFloat from which to extract the coefficient */ +/* bcdar is where DECPMAX bytes will be written, one BCD digit in */ +/* each byte (BCD8 encoding); if df is a NaN the first byte will */ +/* be zero, and if it is infinite they will all be zero */ +/* returns the sign of the coefficient (DECFLOAT_Sign if negative, */ +/* 0 otherwise) */ +/* */ +/* No error is possible, and no status will be set. If df is a */ +/* special value the array is set to zeros (for Infinity) or to the */ +/* payload of a qNaN or sNaN. */ +/* ------------------------------------------------------------------ */ +Int decFloatGetCoefficient(const decFloat *df, uByte *bcdar) { + if (DFISINF(df)) memset(bcdar, 0, DECPMAX); + else { + GETCOEFF(df, bcdar); /* use macro */ + if (DFISNAN(df)) bcdar[0]=0; /* MSD needs correcting */ + } + return DFISSIGNED(df); + } /* decFloatGetCoefficient */ + +/* ------------------------------------------------------------------ */ +/* decFloatGetExponent -- get unbiased exponent */ +/* */ +/* df is the decFloat from which to extract the exponent */ +/* returns the exponent, q. */ +/* */ +/* No error is possible, and no status will be set. If df is a */ +/* special value the first seven bits of the decFloat are returned, */ +/* left adjusted and with the first (sign) bit set to 0 (followed by */ +/* 25 0 bits). e.g., -sNaN would return 0x7e000000 (DECFLOAT_sNaN). */ +/* ------------------------------------------------------------------ */ +Int decFloatGetExponent(const decFloat *df) { + if (DFISSPECIAL(df)) return DFWORD(df, 0)&0x7e000000; + return GETEXPUN(df); + } /* decFloatGetExponent */ + +/* ------------------------------------------------------------------ */ +/* decFloatSetCoefficient -- set coefficient from BCD8 */ +/* */ +/* df is the target decFloat (and source of exponent/special value) */ +/* bcdar holds DECPMAX digits to set the coefficient from, one */ +/* digit in each byte (BCD8 encoding); the first (MSD) is ignored */ +/* if df is a NaN; all are ignored if df is infinite. */ +/* sig is DECFLOAT_Sign to set the sign bit, 0 otherwise */ +/* returns df, which will be canonical */ +/* */ +/* No error is possible, and no status will be set. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatSetCoefficient(decFloat *df, const uByte *bcdar, + Int sig) { + uInt exp; /* for exponent */ + uByte bcdzero[DECPMAX]; /* for infinities */ + + /* Exponent/special code is extracted from df */ + if (DFISSPECIAL(df)) { + exp=DFWORD(df, 0)&0x7e000000; + if (DFISINF(df)) { + memset(bcdzero, 0, DECPMAX); + return decFloatFromBCD(df, exp, bcdzero, sig); + } + } + else exp=GETEXPUN(df); + return decFloatFromBCD(df, exp, bcdar, sig); + } /* decFloatSetCoefficient */ + +/* ------------------------------------------------------------------ */ +/* decFloatSetExponent -- set exponent or special value */ +/* */ +/* df is the target decFloat (and source of coefficient/payload) */ +/* set is the context for reporting status */ +/* exp is the unbiased exponent, q, or a special value in the form */ +/* returned by decFloatGetExponent */ +/* returns df, which will be canonical */ +/* */ +/* No error is possible, but Overflow or Underflow might occur. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatSetExponent(decFloat *df, decContext *set, Int exp) { + uByte bcdcopy[DECPMAX]; /* for coefficient */ + bcdnum num; /* work */ + num.exponent=exp; + num.sign=decFloatGetCoefficient(df, bcdcopy); /* extract coefficient */ + if (DFISSPECIAL(df)) { /* MSD or more needs correcting */ + if (DFISINF(df)) memset(bcdcopy, 0, DECPMAX); + bcdcopy[0]=0; + } + num.msd=bcdcopy; + num.lsd=bcdcopy+DECPMAX-1; + return decFinalize(df, &num, set); + } /* decFloatSetExponent */ + +/* ------------------------------------------------------------------ */ +/* decFloatRadix -- returns the base (10) */ +/* */ +/* df is any decFloat of this format */ +/* ------------------------------------------------------------------ */ +uInt decFloatRadix(const decFloat *df) { + if (df) return 10; /* to placate compiler */ + return 10; + } /* decFloatRadix */ + +/* ------------------------------------------------------------------ */ +/* decFloatShow -- printf a decFloat in hexadecimal and decimal */ +/* df is the decFloat to show */ +/* tag is a tag string displayed with the number */ +/* */ +/* This is a debug aid; the precise format of the string may change. */ +/* ------------------------------------------------------------------ */ +void decFloatShow(const decFloat *df, const char *tag) { + char hexbuf[DECBYTES*2+DECBYTES/4+1]; /* NB blank after every fourth */ + char buff[DECSTRING]; /* for value in decimal */ + Int i, j=0; + + for (i=0; i<DECBYTES; i++) { + #if DECLITEND + sprintf(&hexbuf[j], "%02x", df->bytes[DECBYTES-1-i]); + #else + sprintf(&hexbuf[j], "%02x", df->bytes[i]); + #endif + j+=2; + /* the next line adds blank (and terminator) after final pair, too */ + if ((i+1)%4==0) {strcpy(&hexbuf[j], " "); j++;} + } + decFloatToString(df, buff); + printf(">%s> %s [big-endian] %s\n", tag, hexbuf, buff); + return; + } /* decFloatShow */ + +/* ------------------------------------------------------------------ */ +/* decFloatToBCD -- get sign, exponent, and BCD8 from a decFloat */ +/* */ +/* df is the source decFloat */ +/* exp will be set to the unbiased exponent, q, or to a special */ +/* value in the form returned by decFloatGetExponent */ +/* bcdar is where DECPMAX bytes will be written, one BCD digit in */ +/* each byte (BCD8 encoding); if df is a NaN the first byte will */ +/* be zero, and if it is infinite they will all be zero */ +/* returns the sign of the coefficient (DECFLOAT_Sign if negative, */ +/* 0 otherwise) */ +/* */ +/* No error is possible, and no status will be set. */ +/* ------------------------------------------------------------------ */ +Int decFloatToBCD(const decFloat *df, Int *exp, uByte *bcdar) { + if (DFISINF(df)) { + memset(bcdar, 0, DECPMAX); + *exp=DFWORD(df, 0)&0x7e000000; + } + else { + GETCOEFF(df, bcdar); /* use macro */ + if (DFISNAN(df)) { + bcdar[0]=0; /* MSD needs correcting */ + *exp=DFWORD(df, 0)&0x7e000000; + } + else { /* finite */ + *exp=GETEXPUN(df); + } + } + return DFISSIGNED(df); + } /* decFloatToBCD */ + +/* ------------------------------------------------------------------ */ +/* decFloatToEngString -- conversion to numeric string, engineering */ +/* */ +/* df is the decFloat format number to convert */ +/* string is the string where the result will be laid out */ +/* */ +/* string must be at least DECPMAX+9 characters (the worst case is */ +/* "-0.00000nnn...nnn\0", which is as long as the exponent form when */ +/* DECEMAXD<=4); this condition is asserted above */ +/* */ +/* No error is possible, and no status will be set */ +/* ------------------------------------------------------------------ */ +char * decFloatToEngString(const decFloat *df, char *string){ + uInt msd; /* coefficient MSD */ + Int exp; /* exponent top two bits or full */ + uInt comb; /* combination field */ + char *cstart; /* coefficient start */ + char *c; /* output pointer in string */ + char *s, *t; /* .. (source, target) */ + Int pre, e; /* work */ + const uByte *u; /* .. */ + + /* Source words; macro handles endianness */ + uInt sourhi=DFWORD(df, 0); /* word with sign */ + #if DECPMAX==16 + uInt sourlo=DFWORD(df, 1); + #elif DECPMAX==34 + uInt sourmh=DFWORD(df, 1); + uInt sourml=DFWORD(df, 2); + uInt sourlo=DFWORD(df, 3); + #endif + + c=string; /* where result will go */ + if (((Int)sourhi)<0) *c++='-'; /* handle sign */ + comb=sourhi>>26; /* sign+combination field */ + msd=DECCOMBMSD[comb]; /* decode the combination field */ + exp=DECCOMBEXP[comb]; /* .. */ + + if (EXPISSPECIAL(exp)) { /* special */ + if (exp==DECFLOAT_Inf) { /* infinity */ + strcpy(c, "Inf"); + strcpy(c+3, "inity"); + return string; /* easy */ + } + if (sourhi&0x02000000) *c++='s'; /* sNaN */ + strcpy(c, "NaN"); /* complete word */ + c+=3; /* step past */ + /* quick exit if the payload is zero */ + #if DECPMAX==7 + if ((sourhi&0x000fffff)==0) return string; + #elif DECPMAX==16 + if (sourlo==0 && (sourhi&0x0003ffff)==0) return string; + #elif DECPMAX==34 + if (sourlo==0 && sourml==0 && sourmh==0 + && (sourhi&0x00003fff)==0) return string; + #endif + /* otherwise drop through to add integer; set correct exp etc. */ + exp=0; msd=0; /* setup for following code */ + } + else { /* complete exponent; top two bits are in place */ + exp+=GETECON(df)-DECBIAS; /* .. + continuation and unbias */ + } + + /* convert the digits of the significand to characters */ + cstart=c; /* save start of coefficient */ + if (msd) *c++=(char)('0'+(char)msd); /* non-zero most significant digit */ + + /* Decode the declets. After extracting each declet, it is */ + /* decoded to a 4-uByte sequence by table lookup; the four uBytes */ + /* are the three encoded BCD8 digits followed by a 1-byte length */ + /* (significant digits, except that 000 has length 0). This allows */ + /* us to left-align the first declet with non-zero content, then */ + /* the remaining ones are full 3-char length. Fixed-length copies */ + /* are used because variable-length memcpy causes a subroutine call */ + /* in at least two compilers. (The copies are length 4 for speed */ + /* and are safe because the last item in the array is of length */ + /* three and has the length byte following.) */ + #define dpd2char(dpdin) u=&DPD2BCD8[((dpdin)&0x3ff)*4]; \ + if (c!=cstart) {UINTAT(c)=UINTAT(u)|CHARMASK; c+=3;} \ + else if (*(u+3)) { \ + UINTAT(c)=UINTAT(u+3-*(u+3))|CHARMASK; c+=*(u+3);} + + #if DECPMAX==7 + dpd2char(sourhi>>10); /* declet 1 */ + dpd2char(sourhi); /* declet 2 */ + + #elif DECPMAX==16 + dpd2char(sourhi>>8); /* declet 1 */ + dpd2char((sourhi<<2) | (sourlo>>30)); /* declet 2 */ + dpd2char(sourlo>>20); /* declet 3 */ + dpd2char(sourlo>>10); /* declet 4 */ + dpd2char(sourlo); /* declet 5 */ + + #elif DECPMAX==34 + dpd2char(sourhi>>4); /* declet 1 */ + dpd2char((sourhi<<6) | (sourmh>>26)); /* declet 2 */ + dpd2char(sourmh>>16); /* declet 3 */ + dpd2char(sourmh>>6); /* declet 4 */ + dpd2char((sourmh<<4) | (sourml>>28)); /* declet 5 */ + dpd2char(sourml>>18); /* declet 6 */ + dpd2char(sourml>>8); /* declet 7 */ + dpd2char((sourml<<2) | (sourlo>>30)); /* declet 8 */ + dpd2char(sourlo>>20); /* declet 9 */ + dpd2char(sourlo>>10); /* declet 10 */ + dpd2char(sourlo); /* declet 11 */ + #endif + + if (c==cstart) *c++='0'; /* all zeros, empty -- make "0" */ + + if (exp==0) { /* integer or NaN case -- easy */ + *c='\0'; /* terminate */ + return string; + } + /* non-0 exponent */ + + e=0; /* assume no E */ + pre=(Int)(c-cstart)+exp; /* length+exp [c->LSD+1] */ + /* [here, pre-exp is the digits count (==1 for zero)] */ + + if (exp>0 || pre<-5) { /* need exponential form */ + e=pre-1; /* calculate E value */ + pre=1; /* assume one digit before '.' */ + if (e!=0) { /* engineering: may need to adjust */ + Int adj; /* adjustment */ + /* The C remainder operator is undefined for negative numbers, so */ + /* a positive remainder calculation must be used here */ + if (e<0) { + adj=(-e)%3; + if (adj!=0) adj=3-adj; + } + else { /* e>0 */ + adj=e%3; + } + e=e-adj; + /* if dealing with zero still produce an exponent which is a */ + /* multiple of three, as expected, but there will only be the */ + /* one zero before the E, still. Otherwise note the padding. */ + if (!DFISZERO(df)) pre+=adj; + else { /* is zero */ + if (adj!=0) { /* 0.00Esnn needed */ + e=e+3; + pre=-(2-adj); + } + } /* zero */ + } /* engineering adjustment */ + } /* exponential form */ + /* printf("e=%ld pre=%ld exp=%ld\n", (LI)e, (LI)pre, (LI)exp); */ + + /* modify the coefficient, adding 0s, '.', and E+nn as needed */ + if (pre>0) { /* ddd.ddd (plain), perhaps with E */ + /* or dd00 padding for engineering */ + char *dotat=cstart+pre; + if (dotat<c) { /* if embedded dot needed... */ + /* move by fours; there must be space for junk at the end */ + /* because there is still space for exponent */ + s=dotat+ROUNDDOWN4(c-dotat); /* source */ + t=s+1; /* target */ + /* open the gap */ + for (; s>=dotat; s-=4, t-=4) UINTAT(t)=UINTAT(s); + *dotat='.'; + c++; /* length increased by one */ + } /* need dot? */ + else for (; c<dotat; c++) *c='0'; /* pad for engineering */ + } /* pre>0 */ + else { + /* -5<=pre<=0: here for plain 0.ddd or 0.000ddd forms (may have + E, but only for 0.00E+3 kind of case -- with plenty of spare + space in this case */ + pre=-pre+2; /* gap width, including "0." */ + t=cstart+ROUNDDOWN4(c-cstart)+pre; /* preferred first target point */ + /* backoff if too far to the right */ + if (t>string+DECSTRING-5) t=string+DECSTRING-5; /* adjust to fit */ + /* now shift the entire coefficient to the right, being careful not */ + /* to access to the left of string */ + for (s=t-pre; s>=string; s-=4, t-=4) UINTAT(t)=UINTAT(s); + /* for Quads and Singles there may be a character or two left... */ + s+=3; /* where next would come from */ + for(; s>=cstart; s--, t--) *(t+3)=*(s); + /* now have fill 0. through 0.00000; use overlaps to avoid tests */ + if (pre>=4) { + UINTAT(cstart+pre-4)=UINTAT("0000"); + UINTAT(cstart)=UINTAT("0.00"); + } + else { /* 2 or 3 */ + *(cstart+pre-1)='0'; + USHORTAT(cstart)=USHORTAT("0."); + } + c+=pre; /* to end */ + } + + /* finally add the E-part, if needed; it will never be 0, and has */ + /* a maximum length of 3 or 4 digits (asserted above) */ + if (e!=0) { + USHORTAT(c)=USHORTAT("E+"); /* starts with E, assume + */ + c++; + if (e<0) { + *c='-'; /* oops, need '-' */ + e=-e; /* uInt, please */ + } + c++; + /* Three-character exponents are easy; 4-character a little trickier */ + #if DECEMAXD<=3 + u=&BIN2BCD8[e*4]; /* -> 3 digits + length byte */ + /* copy fixed 4 characters [is safe], starting at non-zero */ + /* and with character mask to convert BCD to char */ + UINTAT(c)=UINTAT(u+3-*(u+3))|CHARMASK; + c+=*(u+3); /* bump pointer appropriately */ + #elif DECEMAXD==4 + if (e<1000) { /* 3 (or fewer) digits case */ + u=&BIN2BCD8[e*4]; /* -> 3 digits + length byte */ + UINTAT(c)=UINTAT(u+3-*(u+3))|CHARMASK; /* [as above] */ + c+=*(u+3); /* bump pointer appropriately */ + } + else { /* 4-digits */ + Int thou=((e>>3)*1049)>>17; /* e/1000 */ + Int rem=e-(1000*thou); /* e%1000 */ + *c++=(char)('0'+(char)thou); /* the thousands digit */ + u=&BIN2BCD8[rem*4]; /* -> 3 digits + length byte */ + UINTAT(c)=UINTAT(u)|CHARMASK; /* copy fixed 3+1 characters [is safe] */ + c+=3; /* bump pointer, always 3 digits */ + } + #endif + } + *c='\0'; /* terminate */ + /*printf("res %s\n", string); */ + return string; + } /* decFloatToEngString */ + +/* ------------------------------------------------------------------ */ +/* decFloatToPacked -- convert decFloat to Packed decimal + exponent */ +/* */ +/* df is the source decFloat */ +/* exp will be set to the unbiased exponent, q, or to a special */ +/* value in the form returned by decFloatGetExponent */ +/* packed is where DECPMAX nibbles will be written with the sign as */ +/* final nibble (0x0c for +, 0x0d for -); a NaN has a first nibble */ +/* of zero, and an infinity is all zeros. decDouble and decQuad */ +/* have a additional leading zero nibble, leading to result */ +/* lengths of 4, 9, and 18 bytes. */ +/* returns the sign of the coefficient (DECFLOAT_Sign if negative, */ +/* 0 otherwise) */ +/* */ +/* No error is possible, and no status will be set. */ +/* ------------------------------------------------------------------ */ +Int decFloatToPacked(const decFloat *df, Int *exp, uByte *packed) { + uByte bcdar[DECPMAX+2]; /* work buffer */ + uByte *ip=bcdar, *op=packed; /* work pointers */ + if (DFISINF(df)) { + memset(bcdar, 0, DECPMAX+2); + *exp=DECFLOAT_Inf; + } + else { + GETCOEFF(df, bcdar+1); /* use macro */ + if (DFISNAN(df)) { + bcdar[1]=0; /* MSD needs clearing */ + *exp=DFWORD(df, 0)&0x7e000000; + } + else { /* finite */ + *exp=GETEXPUN(df); + } + } + /* now pack; coefficient currently at bcdar+1 */ + #if SINGLE + ip++; /* ignore first byte */ + #else + *ip=0; /* need leading zero */ + #endif + /* set final byte to Packed BCD sign value */ + bcdar[DECPMAX+1]=(DFISSIGNED(df) ? DECPMINUS : DECPPLUS); + /* pack an even number of bytes... */ + for (; op<packed+((DECPMAX+2)/2); op++, ip+=2) { + *op=(uByte)((*ip<<4)+*(ip+1)); + } + return (bcdar[DECPMAX+1]==DECPMINUS ? DECFLOAT_Sign : 0); + } /* decFloatToPacked */ + +/* ------------------------------------------------------------------ */ +/* decFloatToString -- conversion to numeric string */ +/* */ +/* df is the decFloat format number to convert */ +/* string is the string where the result will be laid out */ +/* */ +/* string must be at least DECPMAX+9 characters (the worst case is */ +/* "-0.00000nnn...nnn\0", which is as long as the exponent form when */ +/* DECEMAXD<=4); this condition is asserted above */ +/* */ +/* No error is possible, and no status will be set */ +/* ------------------------------------------------------------------ */ +char * decFloatToString(const decFloat *df, char *string){ + uInt msd; /* coefficient MSD */ + Int exp; /* exponent top two bits or full */ + uInt comb; /* combination field */ + char *cstart; /* coefficient start */ + char *c; /* output pointer in string */ + char *s, *t; /* .. (source, target) */ + Int pre, e; /* work */ + const uByte *u; /* .. */ + + /* Source words; macro handles endianness */ + uInt sourhi=DFWORD(df, 0); /* word with sign */ + #if DECPMAX==16 + uInt sourlo=DFWORD(df, 1); + #elif DECPMAX==34 + uInt sourmh=DFWORD(df, 1); + uInt sourml=DFWORD(df, 2); + uInt sourlo=DFWORD(df, 3); + #endif + + c=string; /* where result will go */ + if (((Int)sourhi)<0) *c++='-'; /* handle sign */ + comb=sourhi>>26; /* sign+combination field */ + msd=DECCOMBMSD[comb]; /* decode the combination field */ + exp=DECCOMBEXP[comb]; /* .. */ + + if (EXPISSPECIAL(exp)) { /* special */ + if (exp==DECFLOAT_Inf) { /* infinity */ + strcpy(c, "Infinity"); + return string; /* easy */ + } + if (sourhi&0x02000000) *c++='s'; /* sNaN */ + strcpy(c, "NaN"); /* complete word */ + c+=3; /* step past */ + /* quick exit if the payload is zero */ + #if DECPMAX==7 + if ((sourhi&0x000fffff)==0) return string; + #elif DECPMAX==16 + if (sourlo==0 && (sourhi&0x0003ffff)==0) return string; + #elif DECPMAX==34 + if (sourlo==0 && sourml==0 && sourmh==0 + && (sourhi&0x00003fff)==0) return string; + #endif + /* otherwise drop through to add integer; set correct exp etc. */ + exp=0; msd=0; /* setup for following code */ + } + else { /* complete exponent; top two bits are in place */ + exp+=GETECON(df)-DECBIAS; /* .. + continuation and unbias */ + } + + /* convert the digits of the significand to characters */ + cstart=c; /* save start of coefficient */ + if (msd) *c++=(char)('0'+(char)msd); /* non-zero most significant digit */ + + /* Decode the declets. After extracting each declet, it is */ + /* decoded to a 4-uByte sequence by table lookup; the four uBytes */ + /* are the three encoded BCD8 digits followed by a 1-byte length */ + /* (significant digits, except that 000 has length 0). This allows */ + /* us to left-align the first declet with non-zero content, then */ + /* the remaining ones are full 3-char length. Fixed-length copies */ + /* are used because variable-length memcpy causes a subroutine call */ + /* in at least two compilers. (The copies are length 4 for speed */ + /* and are safe because the last item in the array is of length */ + /* three and has the length byte following.) */ + #define dpd2char(dpdin) u=&DPD2BCD8[((dpdin)&0x3ff)*4]; \ + if (c!=cstart) {UINTAT(c)=UINTAT(u)|CHARMASK; c+=3;} \ + else if (*(u+3)) { \ + UINTAT(c)=UINTAT(u+3-*(u+3))|CHARMASK; c+=*(u+3);} + + #if DECPMAX==7 + dpd2char(sourhi>>10); /* declet 1 */ + dpd2char(sourhi); /* declet 2 */ + + #elif DECPMAX==16 + dpd2char(sourhi>>8); /* declet 1 */ + dpd2char((sourhi<<2) | (sourlo>>30)); /* declet 2 */ + dpd2char(sourlo>>20); /* declet 3 */ + dpd2char(sourlo>>10); /* declet 4 */ + dpd2char(sourlo); /* declet 5 */ + + #elif DECPMAX==34 + dpd2char(sourhi>>4); /* declet 1 */ + dpd2char((sourhi<<6) | (sourmh>>26)); /* declet 2 */ + dpd2char(sourmh>>16); /* declet 3 */ + dpd2char(sourmh>>6); /* declet 4 */ + dpd2char((sourmh<<4) | (sourml>>28)); /* declet 5 */ + dpd2char(sourml>>18); /* declet 6 */ + dpd2char(sourml>>8); /* declet 7 */ + dpd2char((sourml<<2) | (sourlo>>30)); /* declet 8 */ + dpd2char(sourlo>>20); /* declet 9 */ + dpd2char(sourlo>>10); /* declet 10 */ + dpd2char(sourlo); /* declet 11 */ + #endif + + if (c==cstart) *c++='0'; /* all zeros, empty -- make "0" */ + + /*[This fast path is valid but adds 3-5 cycles to worst case length] */ + /*if (exp==0) { // integer or NaN case -- easy */ + /* *c='\0'; // terminate */ + /* return string; */ + /* } */ + + e=0; /* assume no E */ + pre=(Int)(c-cstart)+exp; /* length+exp [c->LSD+1] */ + /* [here, pre-exp is the digits count (==1 for zero)] */ + + if (exp>0 || pre<-5) { /* need exponential form */ + e=pre-1; /* calculate E value */ + pre=1; /* assume one digit before '.' */ + } /* exponential form */ + + /* modify the coefficient, adding 0s, '.', and E+nn as needed */ + if (pre>0) { /* ddd.ddd (plain), perhaps with E */ + char *dotat=cstart+pre; + if (dotat<c) { /* if embedded dot needed... */ + /* move by fours; there must be space for junk at the end */ + /* because there is still space for exponent */ + s=dotat+ROUNDDOWN4(c-dotat); /* source */ + t=s+1; /* target */ + /* open the gap */ + for (; s>=dotat; s-=4, t-=4) UINTAT(t)=UINTAT(s); + *dotat='.'; + c++; /* length increased by one */ + } /* need dot? */ + + /* finally add the E-part, if needed; it will never be 0, and has */ + /* a maximum length of 3 or 4 digits (asserted above) */ + if (e!=0) { + USHORTAT(c)=USHORTAT("E+"); /* starts with E, assume + */ + c++; + if (e<0) { + *c='-'; /* oops, need '-' */ + e=-e; /* uInt, please */ + } + c++; + /* Three-character exponents are easy; 4-character a little trickier */ + #if DECEMAXD<=3 + u=&BIN2BCD8[e*4]; /* -> 3 digits + length byte */ + /* copy fixed 4 characters [is safe], starting at non-zero */ + /* and with character mask to convert BCD to char */ + UINTAT(c)=UINTAT(u+3-*(u+3))|CHARMASK; + c+=*(u+3); /* bump pointer appropriately */ + #elif DECEMAXD==4 + if (e<1000) { /* 3 (or fewer) digits case */ + u=&BIN2BCD8[e*4]; /* -> 3 digits + length byte */ + UINTAT(c)=UINTAT(u+3-*(u+3))|CHARMASK; /* [as above] */ + c+=*(u+3); /* bump pointer appropriately */ + } + else { /* 4-digits */ + Int thou=((e>>3)*1049)>>17; /* e/1000 */ + Int rem=e-(1000*thou); /* e%1000 */ + *c++=(char)('0'+(char)thou); /* the thousands digit */ + u=&BIN2BCD8[rem*4]; /* -> 3 digits + length byte */ + UINTAT(c)=UINTAT(u)|CHARMASK; /* copy fixed 3+1 characters [is safe] */ + c+=3; /* bump pointer, always 3 digits */ + } + #endif + } + *c='\0'; /* add terminator */ + /*printf("res %s\n", string); */ + return string; + } /* pre>0 */ + + /* -5<=pre<=0: here for plain 0.ddd or 0.000ddd forms (can never have E) */ + /* Surprisingly, this is close to being the worst-case path, so the */ + /* shift is done by fours; this is a little tricky because the */ + /* rightmost character to be written must not be beyond where the */ + /* rightmost terminator could be -- so backoff to not touch */ + /* terminator position if need be (this can make exact alignments */ + /* for full Doubles, but in some cases needs care not to access too */ + /* far to the left) */ + + pre=-pre+2; /* gap width, including "0." */ + t=cstart+ROUNDDOWN4(c-cstart)+pre; /* preferred first target point */ + /* backoff if too far to the right */ + if (t>string+DECSTRING-5) t=string+DECSTRING-5; /* adjust to fit */ + /* now shift the entire coefficient to the right, being careful not */ + /* to access to the left of string */ + for (s=t-pre; s>=string; s-=4, t-=4) UINTAT(t)=UINTAT(s); + /* for Quads and Singles there may be a character or two left... */ + s+=3; /* where next would come from */ + for(; s>=cstart; s--, t--) *(t+3)=*(s); + /* now have fill 0. through 0.00000; use overlaps to avoid tests */ + if (pre>=4) { + UINTAT(cstart+pre-4)=UINTAT("0000"); + UINTAT(cstart)=UINTAT("0.00"); + } + else { /* 2 or 3 */ + *(cstart+pre-1)='0'; + USHORTAT(cstart)=USHORTAT("0."); + } + *(c+pre)='\0'; /* terminate */ + return string; + } /* decFloatToString */ + +/* ------------------------------------------------------------------ */ +/* decFloatToWider -- conversion to next-wider format */ +/* */ +/* source is the decFloat format number which gets the result of */ +/* the conversion */ +/* wider is the decFloatWider format number which will be narrowed */ +/* returns wider */ +/* */ +/* Widening is always exact; no status is set (sNaNs are copied and */ +/* do not signal). The result will be canonical if the source is, */ +/* and may or may not be if the source is not. */ +/* ------------------------------------------------------------------ */ +/* widening is not possible for decQuad format numbers; simply omit */ +#if !QUAD +decFloatWider * decFloatToWider(const decFloat *source, decFloatWider *wider) { + uInt msd; + + /* Construct and copy the sign word */ + if (DFISSPECIAL(source)) { + /* copy sign, combination, and first bit of exponent (sNaN selector) */ + DFWWORD(wider, 0)=DFWORD(source, 0)&0xfe000000; + msd=0; + } + else { /* is finite number */ + uInt exp=GETEXPUN(source)+DECWBIAS; /* get unbiased exponent and rebias */ + uInt code=(exp>>DECWECONL)<<29; /* set two bits of exp [msd=0] */ + code|=(exp<<(32-6-DECWECONL)) & 0x03ffffff; /* add exponent continuation */ + code|=DFWORD(source, 0)&0x80000000; /* add sign */ + DFWWORD(wider, 0)=code; /* .. and place top word in wider */ + msd=GETMSD(source); /* get source coefficient MSD [0-9] */ + } + /* Copy the coefficient and clear any 'unused' words to left */ + #if SINGLE + DFWWORD(wider, 1)=(DFWORD(source, 0)&0x000fffff)|(msd<<20); + #elif DOUBLE + DFWWORD(wider, 2)=(DFWORD(source, 0)&0x0003ffff)|(msd<<18); + DFWWORD(wider, 3)=DFWORD(source, 1); + DFWWORD(wider, 1)=0; + #endif + return wider; + } /* decFloatToWider */ +#endif + +/* ------------------------------------------------------------------ */ +/* decFloatVersion -- return package version string */ +/* */ +/* returns a constant string describing this package */ +/* ------------------------------------------------------------------ */ +const char *decFloatVersion(void) { + return DECVERSION; + } /* decFloatVersion */ + +/* ------------------------------------------------------------------ */ +/* decFloatZero -- set to canonical (integer) zero */ +/* */ +/* df is the decFloat format number to integer +0 (q=0, c=+0) */ +/* returns df */ +/* */ +/* No error is possible, and no status can be set. */ +/* ------------------------------------------------------------------ */ +decFloat * decFloatZero(decFloat *df){ + DFWORD(df, 0)=ZEROWORD; /* set appropriate top word */ + #if DOUBLE || QUAD + DFWORD(df, 1)=0; + #if QUAD + DFWORD(df, 2)=0; + DFWORD(df, 3)=0; + #endif + #endif + /* decFloatShow(df, "zero"); */ + return df; + } /* decFloatZero */ + +/* ------------------------------------------------------------------ */ +/* Private generic function (not format-specific) for development use */ +/* ------------------------------------------------------------------ */ +/* This is included once only, for all to use */ +#if QUAD && (DECCHECK || DECTRACE) + /* ---------------------------------------------------------------- */ + /* decShowNum -- display bcd8 number in debug form */ + /* */ + /* num is the bcdnum to display */ + /* tag is a string to label the display */ + /* ---------------------------------------------------------------- */ + void decShowNum(const bcdnum *num, const char *tag) { + const char *csign="+"; /* sign character */ + uByte *ub; /* work */ + if (num->sign==DECFLOAT_Sign) csign="-"; + + printf(">%s> ", tag); + if (num->exponent==DECFLOAT_Inf) printf("%sInfinity", csign); + else if (num->exponent==DECFLOAT_qNaN) printf("%sqNaN", csign); + else if (num->exponent==DECFLOAT_sNaN) printf("%ssNaN", csign); + else { /* finite */ + char qbuf[10]; /* for right-aligned q */ + char *c; /* work */ + const uByte *u; /* .. */ + Int e=num->exponent; /* .. exponent */ + strcpy(qbuf, "q="); + c=&qbuf[2]; /* where exponent will go */ + /* lay out the exponent */ + if (e<0) { + *c++='-'; /* add '-' */ + e=-e; /* uInt, please */ + } + #if DECEMAXD>4 + #error Exponent form is too long for ShowNum to lay out + #endif + if (e==0) *c++='0'; /* 0-length case */ + else if (e<1000) { /* 3 (or fewer) digits case */ + u=&BIN2BCD8[e*4]; /* -> 3 digits + length byte */ + UINTAT(c)=UINTAT(u+3-*(u+3))|CHARMASK; /* [as above] */ + c+=*(u+3); /* bump pointer appropriately */ + } + else { /* 4-digits */ + Int thou=((e>>3)*1049)>>17; /* e/1000 */ + Int rem=e-(1000*thou); /* e%1000 */ + *c++=(char)('0'+(char)thou); /* the thousands digit */ + u=&BIN2BCD8[rem*4]; /* -> 3 digits + length byte */ + UINTAT(c)=UINTAT(u)|CHARMASK; /* copy fixed 3+1 characters [is safe] */ + c+=3; /* bump pointer, always 3 digits */ + } + *c='\0'; /* add terminator */ + printf("%7s c=%s", qbuf, csign); + } + + if (!EXPISSPECIAL(num->exponent) || num->msd!=num->lsd || *num->lsd!=0) { + for (ub=num->msd; ub<=num->lsd; ub++) { /* coefficient... */ + printf("%1x", *ub); + if ((num->lsd-ub)%3==0 && ub!=num->lsd) printf(" "); /* 4-space */ + } + } + printf("\n"); + } /* decShowNum */ +#endif diff --git a/libdecnumber/decContext.c b/libdecnumber/decContext.c new file mode 100644 index 0000000..0774193 --- /dev/null +++ b/libdecnumber/decContext.c @@ -0,0 +1,432 @@ +/* Decimal context module for the decNumber C Library. + Copyright (C) 2005, 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* Decimal Context module */ +/* ------------------------------------------------------------------ */ +/* This module comprises the routines for handling arithmetic */ +/* context structures. */ +/* ------------------------------------------------------------------ */ + +#include <string.h> /* for strcmp */ +#include <stdio.h> /* for printf if DECCHECK */ +#include "config.h" /* for GCC definitions */ +#include "decContext.h" /* context and base types */ +#include "decNumberLocal.h" /* decNumber local types, etc. */ + +#if DECCHECK +/* compile-time endian tester [assumes sizeof(Int)>1] */ +static const Int mfcone=1; /* constant 1 */ +static const Flag *mfctop=(Flag *)&mfcone; /* -> top byte */ +#define LITEND *mfctop /* named flag; 1=little-endian */ +#endif + +/* ------------------------------------------------------------------ */ +/* round-for-reround digits */ +/* ------------------------------------------------------------------ */ +const uByte DECSTICKYTAB[10]={1,1,2,3,4,6,6,7,8,9}; /* used if sticky */ + +/* ------------------------------------------------------------------ */ +/* Powers of ten (powers[n]==10**n, 0<=n<=9) */ +/* ------------------------------------------------------------------ */ +const uInt DECPOWERS[10]={1, 10, 100, 1000, 10000, 100000, 1000000, + 10000000, 100000000, 1000000000}; + +/* ------------------------------------------------------------------ */ +/* decContextClearStatus -- clear bits in current status */ +/* */ +/* context is the context structure to be queried */ +/* mask indicates the bits to be cleared (the status bit that */ +/* corresponds to each 1 bit in the mask is cleared) */ +/* returns context */ +/* */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +decContext *decContextClearStatus(decContext *context, uInt mask) { + context->status&=~mask; + return context; + } /* decContextClearStatus */ + +/* ------------------------------------------------------------------ */ +/* decContextDefault -- initialize a context structure */ +/* */ +/* context is the structure to be initialized */ +/* kind selects the required set of default values, one of: */ +/* DEC_INIT_BASE -- select ANSI X3-274 defaults */ +/* DEC_INIT_DECIMAL32 -- select IEEE 754r defaults, 32-bit */ +/* DEC_INIT_DECIMAL64 -- select IEEE 754r defaults, 64-bit */ +/* DEC_INIT_DECIMAL128 -- select IEEE 754r defaults, 128-bit */ +/* For any other value a valid context is returned, but with */ +/* Invalid_operation set in the status field. */ +/* returns a context structure with the appropriate initial values. */ +/* ------------------------------------------------------------------ */ +decContext * decContextDefault(decContext *context, Int kind) { + /* set defaults... */ + context->digits=9; /* 9 digits */ + context->emax=DEC_MAX_EMAX; /* 9-digit exponents */ + context->emin=DEC_MIN_EMIN; /* .. balanced */ + context->round=DEC_ROUND_HALF_UP; /* 0.5 rises */ + context->traps=DEC_Errors; /* all but informational */ + context->status=0; /* cleared */ + context->clamp=0; /* no clamping */ + #if DECSUBSET + context->extended=0; /* cleared */ + #endif + switch (kind) { + case DEC_INIT_BASE: + /* [use defaults] */ + break; + case DEC_INIT_DECIMAL32: + context->digits=7; /* digits */ + context->emax=96; /* Emax */ + context->emin=-95; /* Emin */ + context->round=DEC_ROUND_HALF_EVEN; /* 0.5 to nearest even */ + context->traps=0; /* no traps set */ + context->clamp=1; /* clamp exponents */ + #if DECSUBSET + context->extended=1; /* set */ + #endif + break; + case DEC_INIT_DECIMAL64: + context->digits=16; /* digits */ + context->emax=384; /* Emax */ + context->emin=-383; /* Emin */ + context->round=DEC_ROUND_HALF_EVEN; /* 0.5 to nearest even */ + context->traps=0; /* no traps set */ + context->clamp=1; /* clamp exponents */ + #if DECSUBSET + context->extended=1; /* set */ + #endif + break; + case DEC_INIT_DECIMAL128: + context->digits=34; /* digits */ + context->emax=6144; /* Emax */ + context->emin=-6143; /* Emin */ + context->round=DEC_ROUND_HALF_EVEN; /* 0.5 to nearest even */ + context->traps=0; /* no traps set */ + context->clamp=1; /* clamp exponents */ + #if DECSUBSET + context->extended=1; /* set */ + #endif + break; + + default: /* invalid Kind */ + /* use defaults, and .. */ + decContextSetStatus(context, DEC_Invalid_operation); /* trap */ + } + + #if DECCHECK + if (LITEND!=DECLITEND) { + const char *adj; + if (LITEND) adj="little"; + else adj="big"; + printf("Warning: DECLITEND is set to %d, but this computer appears to be %s-endian\n", + DECLITEND, adj); + } + #endif + return context;} /* decContextDefault */ + +/* ------------------------------------------------------------------ */ +/* decContextGetRounding -- return current rounding mode */ +/* */ +/* context is the context structure to be queried */ +/* returns the rounding mode */ +/* */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +enum rounding decContextGetRounding(decContext *context) { + return context->round; + } /* decContextGetRounding */ + +/* ------------------------------------------------------------------ */ +/* decContextGetStatus -- return current status */ +/* */ +/* context is the context structure to be queried */ +/* returns status */ +/* */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +uInt decContextGetStatus(decContext *context) { + return context->status; + } /* decContextGetStatus */ + +/* ------------------------------------------------------------------ */ +/* decContextRestoreStatus -- restore bits in current status */ +/* */ +/* context is the context structure to be updated */ +/* newstatus is the source for the bits to be restored */ +/* mask indicates the bits to be restored (the status bit that */ +/* corresponds to each 1 bit in the mask is set to the value of */ +/* the correspnding bit in newstatus) */ +/* returns context */ +/* */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +decContext *decContextRestoreStatus(decContext *context, + uInt newstatus, uInt mask) { + context->status&=~mask; /* clear the selected bits */ + context->status|=(mask&newstatus); /* or in the new bits */ + return context; + } /* decContextRestoreStatus */ + +/* ------------------------------------------------------------------ */ +/* decContextSaveStatus -- save bits in current status */ +/* */ +/* context is the context structure to be queried */ +/* mask indicates the bits to be saved (the status bits that */ +/* correspond to each 1 bit in the mask are saved) */ +/* returns the AND of the mask and the current status */ +/* */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +uInt decContextSaveStatus(decContext *context, uInt mask) { + return context->status&mask; + } /* decContextSaveStatus */ + +/* ------------------------------------------------------------------ */ +/* decContextSetRounding -- set current rounding mode */ +/* */ +/* context is the context structure to be updated */ +/* newround is the value which will replace the current mode */ +/* returns context */ +/* */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +decContext *decContextSetRounding(decContext *context, + enum rounding newround) { + context->round=newround; + return context; + } /* decContextSetRounding */ + +/* ------------------------------------------------------------------ */ +/* decContextSetStatus -- set status and raise trap if appropriate */ +/* */ +/* context is the context structure to be updated */ +/* status is the DEC_ exception code */ +/* returns the context structure */ +/* */ +/* Control may never return from this routine, if there is a signal */ +/* handler and it takes a long jump. */ +/* ------------------------------------------------------------------ */ +decContext * decContextSetStatus(decContext *context, uInt status) { + context->status|=status; + if (status & context->traps) raise(SIGFPE); + return context;} /* decContextSetStatus */ + +/* ------------------------------------------------------------------ */ +/* decContextSetStatusFromString -- set status from a string + trap */ +/* */ +/* context is the context structure to be updated */ +/* string is a string exactly equal to one that might be returned */ +/* by decContextStatusToString */ +/* */ +/* The status bit corresponding to the string is set, and a trap */ +/* is raised if appropriate. */ +/* */ +/* returns the context structure, unless the string is equal to */ +/* DEC_Condition_MU or is not recognized. In these cases NULL is */ +/* returned. */ +/* ------------------------------------------------------------------ */ +decContext * decContextSetStatusFromString(decContext *context, + const char *string) { + if (strcmp(string, DEC_Condition_CS)==0) + return decContextSetStatus(context, DEC_Conversion_syntax); + if (strcmp(string, DEC_Condition_DZ)==0) + return decContextSetStatus(context, DEC_Division_by_zero); + if (strcmp(string, DEC_Condition_DI)==0) + return decContextSetStatus(context, DEC_Division_impossible); + if (strcmp(string, DEC_Condition_DU)==0) + return decContextSetStatus(context, DEC_Division_undefined); + if (strcmp(string, DEC_Condition_IE)==0) + return decContextSetStatus(context, DEC_Inexact); + if (strcmp(string, DEC_Condition_IS)==0) + return decContextSetStatus(context, DEC_Insufficient_storage); + if (strcmp(string, DEC_Condition_IC)==0) + return decContextSetStatus(context, DEC_Invalid_context); + if (strcmp(string, DEC_Condition_IO)==0) + return decContextSetStatus(context, DEC_Invalid_operation); + #if DECSUBSET + if (strcmp(string, DEC_Condition_LD)==0) + return decContextSetStatus(context, DEC_Lost_digits); + #endif + if (strcmp(string, DEC_Condition_OV)==0) + return decContextSetStatus(context, DEC_Overflow); + if (strcmp(string, DEC_Condition_PA)==0) + return decContextSetStatus(context, DEC_Clamped); + if (strcmp(string, DEC_Condition_RO)==0) + return decContextSetStatus(context, DEC_Rounded); + if (strcmp(string, DEC_Condition_SU)==0) + return decContextSetStatus(context, DEC_Subnormal); + if (strcmp(string, DEC_Condition_UN)==0) + return decContextSetStatus(context, DEC_Underflow); + if (strcmp(string, DEC_Condition_ZE)==0) + return context; + return NULL; /* Multiple status, or unknown */ + } /* decContextSetStatusFromString */ + +/* ------------------------------------------------------------------ */ +/* decContextSetStatusFromStringQuiet -- set status from a string */ +/* */ +/* context is the context structure to be updated */ +/* string is a string exactly equal to one that might be returned */ +/* by decContextStatusToString */ +/* */ +/* The status bit corresponding to the string is set; no trap is */ +/* raised. */ +/* */ +/* returns the context structure, unless the string is equal to */ +/* DEC_Condition_MU or is not recognized. In these cases NULL is */ +/* returned. */ +/* ------------------------------------------------------------------ */ +decContext * decContextSetStatusFromStringQuiet(decContext *context, + const char *string) { + if (strcmp(string, DEC_Condition_CS)==0) + return decContextSetStatusQuiet(context, DEC_Conversion_syntax); + if (strcmp(string, DEC_Condition_DZ)==0) + return decContextSetStatusQuiet(context, DEC_Division_by_zero); + if (strcmp(string, DEC_Condition_DI)==0) + return decContextSetStatusQuiet(context, DEC_Division_impossible); + if (strcmp(string, DEC_Condition_DU)==0) + return decContextSetStatusQuiet(context, DEC_Division_undefined); + if (strcmp(string, DEC_Condition_IE)==0) + return decContextSetStatusQuiet(context, DEC_Inexact); + if (strcmp(string, DEC_Condition_IS)==0) + return decContextSetStatusQuiet(context, DEC_Insufficient_storage); + if (strcmp(string, DEC_Condition_IC)==0) + return decContextSetStatusQuiet(context, DEC_Invalid_context); + if (strcmp(string, DEC_Condition_IO)==0) + return decContextSetStatusQuiet(context, DEC_Invalid_operation); + #if DECSUBSET + if (strcmp(string, DEC_Condition_LD)==0) + return decContextSetStatusQuiet(context, DEC_Lost_digits); + #endif + if (strcmp(string, DEC_Condition_OV)==0) + return decContextSetStatusQuiet(context, DEC_Overflow); + if (strcmp(string, DEC_Condition_PA)==0) + return decContextSetStatusQuiet(context, DEC_Clamped); + if (strcmp(string, DEC_Condition_RO)==0) + return decContextSetStatusQuiet(context, DEC_Rounded); + if (strcmp(string, DEC_Condition_SU)==0) + return decContextSetStatusQuiet(context, DEC_Subnormal); + if (strcmp(string, DEC_Condition_UN)==0) + return decContextSetStatusQuiet(context, DEC_Underflow); + if (strcmp(string, DEC_Condition_ZE)==0) + return context; + return NULL; /* Multiple status, or unknown */ + } /* decContextSetStatusFromStringQuiet */ + +/* ------------------------------------------------------------------ */ +/* decContextSetStatusQuiet -- set status without trap */ +/* */ +/* context is the context structure to be updated */ +/* status is the DEC_ exception code */ +/* returns the context structure */ +/* */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +decContext * decContextSetStatusQuiet(decContext *context, uInt status) { + context->status|=status; + return context;} /* decContextSetStatusQuiet */ + +/* ------------------------------------------------------------------ */ +/* decContextStatusToString -- convert status flags to a string */ +/* */ +/* context is a context with valid status field */ +/* */ +/* returns a constant string describing the condition. If multiple */ +/* (or no) flags are set, a generic constant message is returned. */ +/* ------------------------------------------------------------------ */ +const char *decContextStatusToString(const decContext *context) { + Int status=context->status; + + /* test the five IEEE first, as some of the others are ambiguous when */ + /* DECEXTFLAG=0 */ + if (status==DEC_Invalid_operation ) return DEC_Condition_IO; + if (status==DEC_Division_by_zero ) return DEC_Condition_DZ; + if (status==DEC_Overflow ) return DEC_Condition_OV; + if (status==DEC_Underflow ) return DEC_Condition_UN; + if (status==DEC_Inexact ) return DEC_Condition_IE; + + if (status==DEC_Division_impossible ) return DEC_Condition_DI; + if (status==DEC_Division_undefined ) return DEC_Condition_DU; + if (status==DEC_Rounded ) return DEC_Condition_RO; + if (status==DEC_Clamped ) return DEC_Condition_PA; + if (status==DEC_Subnormal ) return DEC_Condition_SU; + if (status==DEC_Conversion_syntax ) return DEC_Condition_CS; + if (status==DEC_Insufficient_storage ) return DEC_Condition_IS; + if (status==DEC_Invalid_context ) return DEC_Condition_IC; + #if DECSUBSET + if (status==DEC_Lost_digits ) return DEC_Condition_LD; + #endif + if (status==0 ) return DEC_Condition_ZE; + return DEC_Condition_MU; /* Multiple errors */ + } /* decContextStatusToString */ + +/* ------------------------------------------------------------------ */ +/* decContextTestSavedStatus -- test bits in saved status */ +/* */ +/* oldstatus is the status word to be tested */ +/* mask indicates the bits to be tested (the oldstatus bits that */ +/* correspond to each 1 bit in the mask are tested) */ +/* returns 1 if any of the tested bits are 1, or 0 otherwise */ +/* */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +uInt decContextTestSavedStatus(uInt oldstatus, uInt mask) { + return (oldstatus&mask)!=0; + } /* decContextTestSavedStatus */ + +/* ------------------------------------------------------------------ */ +/* decContextTestStatus -- test bits in current status */ +/* */ +/* context is the context structure to be updated */ +/* mask indicates the bits to be tested (the status bits that */ +/* correspond to each 1 bit in the mask are tested) */ +/* returns 1 if any of the tested bits are 1, or 0 otherwise */ +/* */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +uInt decContextTestStatus(decContext *context, uInt mask) { + return (context->status&mask)!=0; + } /* decContextTestStatus */ + +/* ------------------------------------------------------------------ */ +/* decContextZeroStatus -- clear all status bits */ +/* */ +/* context is the context structure to be updated */ +/* returns context */ +/* */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +decContext *decContextZeroStatus(decContext *context) { + context->status=0; + return context; + } /* decContextZeroStatus */ + diff --git a/libdecnumber/decContext.h b/libdecnumber/decContext.h new file mode 100644 index 0000000..f80d03c --- /dev/null +++ b/libdecnumber/decContext.h @@ -0,0 +1,258 @@ +/* Decimal context header module for the decNumber C Library. + Copyright (C) 2005, 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* Decimal Context module header */ +/* ------------------------------------------------------------------ */ +/* */ +/* Context variables must always have valid values: */ +/* */ +/* status -- [any bits may be cleared, but not set, by user] */ +/* round -- must be one of the enumerated rounding modes */ +/* */ +/* The following variables are implied for fixed size formats (i.e., */ +/* they are ignored) but should still be set correctly in case used */ +/* with decNumber functions: */ +/* */ +/* clamp -- must be either 0 or 1 */ +/* digits -- must be in the range 1 through 999999999 */ +/* emax -- must be in the range 0 through 999999999 */ +/* emin -- must be in the range 0 through -999999999 */ +/* extended -- must be either 0 or 1 [present only if DECSUBSET] */ +/* traps -- only defined bits may be set */ +/* */ +/* ------------------------------------------------------------------ */ + +#if !defined(DECCONTEXT) + #define DECCONTEXT + #define DECCNAME "decContext" /* Short name */ + #define DECCFULLNAME "Decimal Context Descriptor" /* Verbose name */ + #define DECCAUTHOR "Mike Cowlishaw" /* Who to blame */ + + #include "gstdint.h" /* C99 standard integers */ + #include <stdio.h> /* for printf, etc. */ + #include <signal.h> /* for traps */ + + /* Extended flags setting -- set this to 0 to use only IEEE flags */ + #define DECEXTFLAG 1 /* 1=enable extended flags */ + + /* Conditional code flag -- set this to 0 for best performance */ + #define DECSUBSET 0 /* 1=enable subset arithmetic */ + + /* Context for operations, with associated constants */ + enum rounding { + DEC_ROUND_CEILING, /* round towards +infinity */ + DEC_ROUND_UP, /* round away from 0 */ + DEC_ROUND_HALF_UP, /* 0.5 rounds up */ + DEC_ROUND_HALF_EVEN, /* 0.5 rounds to nearest even */ + DEC_ROUND_HALF_DOWN, /* 0.5 rounds down */ + DEC_ROUND_DOWN, /* round towards 0 (truncate) */ + DEC_ROUND_FLOOR, /* round towards -infinity */ + DEC_ROUND_05UP, /* round for reround */ + DEC_ROUND_MAX /* enum must be less than this */ + }; + #define DEC_ROUND_DEFAULT DEC_ROUND_HALF_EVEN; + + typedef struct { + int32_t digits; /* working precision */ + int32_t emax; /* maximum positive exponent */ + int32_t emin; /* minimum negative exponent */ + enum rounding round; /* rounding mode */ + uint32_t traps; /* trap-enabler flags */ + uint32_t status; /* status flags */ + uint8_t clamp; /* flag: apply IEEE exponent clamp */ + #if DECSUBSET + uint8_t extended; /* flag: special-values allowed */ + #endif + } decContext; + + /* Maxima and Minima for context settings */ + #define DEC_MAX_DIGITS 999999999 + #define DEC_MIN_DIGITS 1 + #define DEC_MAX_EMAX 999999999 + #define DEC_MIN_EMAX 0 + #define DEC_MAX_EMIN 0 + #define DEC_MIN_EMIN -999999999 + #define DEC_MAX_MATH 999999 /* max emax, etc., for math funcs. */ + + /* Classifications for decimal numbers, aligned with 754r (note */ + /* that 'normal' and 'subnormal' are meaningful only with a */ + /* decContext or a fixed size format). */ + enum decClass { + DEC_CLASS_SNAN, + DEC_CLASS_QNAN, + DEC_CLASS_NEG_INF, + DEC_CLASS_NEG_NORMAL, + DEC_CLASS_NEG_SUBNORMAL, + DEC_CLASS_NEG_ZERO, + DEC_CLASS_POS_ZERO, + DEC_CLASS_POS_SUBNORMAL, + DEC_CLASS_POS_NORMAL, + DEC_CLASS_POS_INF + }; + /* Strings for the decClasses */ + #define DEC_ClassString_SN "sNaN" + #define DEC_ClassString_QN "NaN" + #define DEC_ClassString_NI "-Infinity" + #define DEC_ClassString_NN "-Normal" + #define DEC_ClassString_NS "-Subnormal" + #define DEC_ClassString_NZ "-Zero" + #define DEC_ClassString_PZ "+Zero" + #define DEC_ClassString_PS "+Subnormal" + #define DEC_ClassString_PN "+Normal" + #define DEC_ClassString_PI "+Infinity" + #define DEC_ClassString_UN "Invalid" + + /* Trap-enabler and Status flags (exceptional conditions), and */ + /* their names. The top byte is reserved for internal use */ + #if DECEXTFLAG + /* Extended flags */ + #define DEC_Conversion_syntax 0x00000001 + #define DEC_Division_by_zero 0x00000002 + #define DEC_Division_impossible 0x00000004 + #define DEC_Division_undefined 0x00000008 + #define DEC_Insufficient_storage 0x00000010 /* [when malloc fails] */ + #define DEC_Inexact 0x00000020 + #define DEC_Invalid_context 0x00000040 + #define DEC_Invalid_operation 0x00000080 + #if DECSUBSET + #define DEC_Lost_digits 0x00000100 + #endif + #define DEC_Overflow 0x00000200 + #define DEC_Clamped 0x00000400 + #define DEC_Rounded 0x00000800 + #define DEC_Subnormal 0x00001000 + #define DEC_Underflow 0x00002000 + #else + /* IEEE flags only */ + #define DEC_Conversion_syntax 0x00000010 + #define DEC_Division_by_zero 0x00000002 + #define DEC_Division_impossible 0x00000010 + #define DEC_Division_undefined 0x00000010 + #define DEC_Insufficient_storage 0x00000010 /* [when malloc fails] */ + #define DEC_Inexact 0x00000001 + #define DEC_Invalid_context 0x00000010 + #define DEC_Invalid_operation 0x00000010 + #if DECSUBSET + #define DEC_Lost_digits 0x00000000 + #endif + #define DEC_Overflow 0x00000008 + #define DEC_Clamped 0x00000000 + #define DEC_Rounded 0x00000000 + #define DEC_Subnormal 0x00000000 + #define DEC_Underflow 0x00000004 + #endif + + /* IEEE 854 groupings for the flags */ + /* [DEC_Clamped, DEC_Lost_digits, DEC_Rounded, and DEC_Subnormal */ + /* are not in IEEE 854] */ + #define DEC_IEEE_854_Division_by_zero (DEC_Division_by_zero) + #if DECSUBSET + #define DEC_IEEE_854_Inexact (DEC_Inexact | DEC_Lost_digits) + #else + #define DEC_IEEE_854_Inexact (DEC_Inexact) + #endif + #define DEC_IEEE_854_Invalid_operation (DEC_Conversion_syntax | \ + DEC_Division_impossible | \ + DEC_Division_undefined | \ + DEC_Insufficient_storage | \ + DEC_Invalid_context | \ + DEC_Invalid_operation) + #define DEC_IEEE_854_Overflow (DEC_Overflow) + #define DEC_IEEE_854_Underflow (DEC_Underflow) + + /* flags which are normally errors (result is qNaN, infinite, or 0) */ + #define DEC_Errors (DEC_IEEE_854_Division_by_zero | \ + DEC_IEEE_854_Invalid_operation | \ + DEC_IEEE_854_Overflow | DEC_IEEE_854_Underflow) + /* flags which cause a result to become qNaN */ + #define DEC_NaNs DEC_IEEE_854_Invalid_operation + + /* flags which are normally for information only (finite results) */ + #if DECSUBSET + #define DEC_Information (DEC_Clamped | DEC_Rounded | DEC_Inexact \ + | DEC_Lost_digits) + #else + #define DEC_Information (DEC_Clamped | DEC_Rounded | DEC_Inexact) + #endif + + /* Name strings for the exceptional conditions */ + #define DEC_Condition_CS "Conversion syntax" + #define DEC_Condition_DZ "Division by zero" + #define DEC_Condition_DI "Division impossible" + #define DEC_Condition_DU "Division undefined" + #define DEC_Condition_IE "Inexact" + #define DEC_Condition_IS "Insufficient storage" + #define DEC_Condition_IC "Invalid context" + #define DEC_Condition_IO "Invalid operation" + #if DECSUBSET + #define DEC_Condition_LD "Lost digits" + #endif + #define DEC_Condition_OV "Overflow" + #define DEC_Condition_PA "Clamped" + #define DEC_Condition_RO "Rounded" + #define DEC_Condition_SU "Subnormal" + #define DEC_Condition_UN "Underflow" + #define DEC_Condition_ZE "No status" + #define DEC_Condition_MU "Multiple status" + #define DEC_Condition_Length 21 /* length of the longest string, */ + /* including terminator */ + + /* Initialization descriptors, used by decContextDefault */ + #define DEC_INIT_BASE 0 + #define DEC_INIT_DECIMAL32 32 + #define DEC_INIT_DECIMAL64 64 + #define DEC_INIT_DECIMAL128 128 + /* Synonyms */ + #define DEC_INIT_DECSINGLE DEC_INIT_DECIMAL32 + #define DEC_INIT_DECDOUBLE DEC_INIT_DECIMAL64 + #define DEC_INIT_DECQUAD DEC_INIT_DECIMAL128 + + /* decContext routines */ + + #include "decContextSymbols.h" + + extern decContext * decContextClearStatus(decContext *, uint32_t); + extern decContext * decContextDefault(decContext *, int32_t); + extern enum rounding decContextGetRounding(decContext *); + extern uint32_t decContextGetStatus(decContext *); + extern decContext * decContextRestoreStatus(decContext *, uint32_t, uint32_t); + extern uint32_t decContextSaveStatus(decContext *, uint32_t); + extern decContext * decContextSetRounding(decContext *, enum rounding); + extern decContext * decContextSetStatus(decContext *, uint32_t); + extern decContext * decContextSetStatusFromString(decContext *, const char *); + extern decContext * decContextSetStatusFromStringQuiet(decContext *, const char *); + extern decContext * decContextSetStatusQuiet(decContext *, uint32_t); + extern const char * decContextStatusToString(const decContext *); + extern uint32_t decContextTestSavedStatus(uint32_t, uint32_t); + extern uint32_t decContextTestStatus(decContext *, uint32_t); + extern decContext * decContextZeroStatus(decContext *); + +#endif diff --git a/libdecnumber/decContextSymbols.h b/libdecnumber/decContextSymbols.h new file mode 100644 index 0000000..38830a9 --- /dev/null +++ b/libdecnumber/decContextSymbols.h @@ -0,0 +1,22 @@ +#if !defined(DECCONTEXTSYMBOLS) +#define DECCONTEXTSYMBOLS + +#ifdef IN_LIBGCC2 +#define decContextClearStatus __decContextClearStatus +#define decContextDefault __decContextDefault +#define decContextGetRounding __decContextGetRounding +#define decContextGetStatus __decContextGetStatus +#define decContextRestoreStatus __decContextRestoreStatus +#define decContextSaveStatus __decContextSaveStatus +#define decContextSetRounding __decContextSetRounding +#define decContextSetStatus __decContextSetStatus +#define decContextSetStatusFromString __decContextSetStatusFromString +#define decContextSetStatusFromStringQuiet __decContextSetStatusFromStringQuiet +#define decContextSetStatusQuiet __decContextSetStatusQuiet +#define decContextStatusToString __decContextStatusToString +#define decContextTestSavedStatus __decContextTestSavedStatus +#define decContextTestStatus __decContextTestStatus +#define decContextZeroStatus __decContextZeroStatus +#endif + +#endif diff --git a/libdecnumber/decDPD.h b/libdecnumber/decDPD.h new file mode 100644 index 0000000..8e0347c --- /dev/null +++ b/libdecnumber/decDPD.h @@ -0,0 +1,1214 @@ +/* Conversion lookup tables for the decNumber C Library. + Copyright (C) 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------------ */ +/* Binary Coded Decimal and Densely Packed Decimal conversion lookup tables */ +/* [Automatically generated -- do not edit. 2007.05.05] */ +/* ------------------------------------------------------------------------ */ +/* ------------------------------------------------------------------------ */ +/* For details, see: http://www2.hursley.ibm.com/decimal/DPDecimal.html */ +/* */ +/* This include file defines several DPD and BCD conversion tables: */ +/* */ +/* uint16_t BCD2DPD[2458]; -- BCD -> DPD (0x999 => 2457) */ +/* uint16_t BIN2DPD[1000]; -- Bin -> DPD (999 => 2457) */ +/* uint8_t BIN2CHAR[4001]; -- Bin -> CHAR (999 => '\3' '9' '9' '9') */ +/* uint8_t BIN2BCD8[4000]; -- Bin -> bytes (999 => 9 9 9 3) */ +/* uint16_t DPD2BCD[1024]; -- DPD -> BCD (0x3FF => 0x999) */ +/* uint16_t DPD2BIN[1024]; -- DPD -> BIN (0x3FF => 999) */ +/* uint32_t DPD2BINK[1024]; -- DPD -> BIN * 1000 (0x3FF => 999000) */ +/* uint32_t DPD2BINM[1024]; -- DPD -> BIN * 1E+6 (0x3FF => 999000000) */ +/* uint8_t DPD2BCD8[4096]; -- DPD -> bytes (x3FF => 9 9 9 3) */ +/* */ +/* In all cases the result (10 bits or 12 bits, or binary) is right-aligned */ +/* in the table entry. BIN2CHAR entries are a single byte length (0 for */ +/* value 0) followed by three digit characters; a trailing terminator is */ +/* included to allow 4-char moves always. BIN2BCD8 and DPD2BCD8 entries */ +/* are similar with the three BCD8 digits followed by a one-byte length */ +/* (again, length=0 for value 0). */ +/* */ +/* To use a table, its name, prefixed with DEC_, must be defined with a */ +/* value of 1 before this header file is included. For example: */ +/* #define DEC_BCD2DPD 1 */ +/* This mechanism allows software to only include tables that are needed. */ +/* ------------------------------------------------------------------------ */ + +#if defined(DEC_BCD2DPD) && DEC_BCD2DPD==1 && !defined(DECBCD2DPD) +#define DECBCD2DPD + +const uint16_t BCD2DPD[2458]={ 0, 1, 2, 3, 4, 5, 6, 7, + 8, 9, 0, 0, 0, 0, 0, 0, 16, 17, 18, 19, 20, + 21, 22, 23, 24, 25, 0, 0, 0, 0, 0, 0, 32, 33, + 34, 35, 36, 37, 38, 39, 40, 41, 0, 0, 0, 0, 0, + 0, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 0, 0, + 0, 0, 0, 0, 64, 65, 66, 67, 68, 69, 70, 71, 72, + 73, 0, 0, 0, 0, 0, 0, 80, 81, 82, 83, 84, 85, + 86, 87, 88, 89, 0, 0, 0, 0, 0, 0, 96, 97, 98, + 99, 100, 101, 102, 103, 104, 105, 0, 0, 0, 0, 0, 0, + 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 0, 0, 0, + 0, 0, 0, 10, 11, 42, 43, 74, 75, 106, 107, 78, 79, + 0, 0, 0, 0, 0, 0, 26, 27, 58, 59, 90, 91, 122, + 123, 94, 95, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 0, 0, + 0, 0, 0, 0, 144, 145, 146, 147, 148, 149, 150, 151, 152, + 153, 0, 0, 0, 0, 0, 0, 160, 161, 162, 163, 164, 165, + 166, 167, 168, 169, 0, 0, 0, 0, 0, 0, 176, 177, 178, + 179, 180, 181, 182, 183, 184, 185, 0, 0, 0, 0, 0, 0, + 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 0, 0, 0, + 0, 0, 0, 208, 209, 210, 211, 212, 213, 214, 215, 216, 217, + 0, 0, 0, 0, 0, 0, 224, 225, 226, 227, 228, 229, 230, + 231, 232, 233, 0, 0, 0, 0, 0, 0, 240, 241, 242, 243, + 244, 245, 246, 247, 248, 249, 0, 0, 0, 0, 0, 0, 138, + 139, 170, 171, 202, 203, 234, 235, 206, 207, 0, 0, 0, 0, + 0, 0, 154, 155, 186, 187, 218, 219, 250, 251, 222, 223, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 256, 257, 258, + 259, 260, 261, 262, 263, 264, 265, 0, 0, 0, 0, 0, 0, + 272, 273, 274, 275, 276, 277, 278, 279, 280, 281, 0, 0, 0, + 0, 0, 0, 288, 289, 290, 291, 292, 293, 294, 295, 296, 297, + 0, 0, 0, 0, 0, 0, 304, 305, 306, 307, 308, 309, 310, + 311, 312, 313, 0, 0, 0, 0, 0, 0, 320, 321, 322, 323, + 324, 325, 326, 327, 328, 329, 0, 0, 0, 0, 0, 0, 336, + 337, 338, 339, 340, 341, 342, 343, 344, 345, 0, 0, 0, 0, + 0, 0, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 0, + 0, 0, 0, 0, 0, 368, 369, 370, 371, 372, 373, 374, 375, + 376, 377, 0, 0, 0, 0, 0, 0, 266, 267, 298, 299, 330, + 331, 362, 363, 334, 335, 0, 0, 0, 0, 0, 0, 282, 283, + 314, 315, 346, 347, 378, 379, 350, 351, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 384, 385, 386, 387, 388, 389, 390, + 391, 392, 393, 0, 0, 0, 0, 0, 0, 400, 401, 402, 403, + 404, 405, 406, 407, 408, 409, 0, 0, 0, 0, 0, 0, 416, + 417, 418, 419, 420, 421, 422, 423, 424, 425, 0, 0, 0, 0, + 0, 0, 432, 433, 434, 435, 436, 437, 438, 439, 440, 441, 0, + 0, 0, 0, 0, 0, 448, 449, 450, 451, 452, 453, 454, 455, + 456, 457, 0, 0, 0, 0, 0, 0, 464, 465, 466, 467, 468, + 469, 470, 471, 472, 473, 0, 0, 0, 0, 0, 0, 480, 481, + 482, 483, 484, 485, 486, 487, 488, 489, 0, 0, 0, 0, 0, + 0, 496, 497, 498, 499, 500, 501, 502, 503, 504, 505, 0, 0, + 0, 0, 0, 0, 394, 395, 426, 427, 458, 459, 490, 491, 462, + 463, 0, 0, 0, 0, 0, 0, 410, 411, 442, 443, 474, 475, + 506, 507, 478, 479, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 512, 513, 514, 515, 516, 517, 518, 519, 520, 521, 0, + 0, 0, 0, 0, 0, 528, 529, 530, 531, 532, 533, 534, 535, + 536, 537, 0, 0, 0, 0, 0, 0, 544, 545, 546, 547, 548, + 549, 550, 551, 552, 553, 0, 0, 0, 0, 0, 0, 560, 561, + 562, 563, 564, 565, 566, 567, 568, 569, 0, 0, 0, 0, 0, + 0, 576, 577, 578, 579, 580, 581, 582, 583, 584, 585, 0, 0, + 0, 0, 0, 0, 592, 593, 594, 595, 596, 597, 598, 599, 600, + 601, 0, 0, 0, 0, 0, 0, 608, 609, 610, 611, 612, 613, + 614, 615, 616, 617, 0, 0, 0, 0, 0, 0, 624, 625, 626, + 627, 628, 629, 630, 631, 632, 633, 0, 0, 0, 0, 0, 0, + 522, 523, 554, 555, 586, 587, 618, 619, 590, 591, 0, 0, 0, + 0, 0, 0, 538, 539, 570, 571, 602, 603, 634, 635, 606, 607, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 640, 641, + 642, 643, 644, 645, 646, 647, 648, 649, 0, 0, 0, 0, 0, + 0, 656, 657, 658, 659, 660, 661, 662, 663, 664, 665, 0, 0, + 0, 0, 0, 0, 672, 673, 674, 675, 676, 677, 678, 679, 680, + 681, 0, 0, 0, 0, 0, 0, 688, 689, 690, 691, 692, 693, + 694, 695, 696, 697, 0, 0, 0, 0, 0, 0, 704, 705, 706, + 707, 708, 709, 710, 711, 712, 713, 0, 0, 0, 0, 0, 0, + 720, 721, 722, 723, 724, 725, 726, 727, 728, 729, 0, 0, 0, + 0, 0, 0, 736, 737, 738, 739, 740, 741, 742, 743, 744, 745, + 0, 0, 0, 0, 0, 0, 752, 753, 754, 755, 756, 757, 758, + 759, 760, 761, 0, 0, 0, 0, 0, 0, 650, 651, 682, 683, + 714, 715, 746, 747, 718, 719, 0, 0, 0, 0, 0, 0, 666, + 667, 698, 699, 730, 731, 762, 763, 734, 735, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 768, 769, 770, 771, 772, 773, + 774, 775, 776, 777, 0, 0, 0, 0, 0, 0, 784, 785, 786, + 787, 788, 789, 790, 791, 792, 793, 0, 0, 0, 0, 0, 0, + 800, 801, 802, 803, 804, 805, 806, 807, 808, 809, 0, 0, 0, + 0, 0, 0, 816, 817, 818, 819, 820, 821, 822, 823, 824, 825, + 0, 0, 0, 0, 0, 0, 832, 833, 834, 835, 836, 837, 838, + 839, 840, 841, 0, 0, 0, 0, 0, 0, 848, 849, 850, 851, + 852, 853, 854, 855, 856, 857, 0, 0, 0, 0, 0, 0, 864, + 865, 866, 867, 868, 869, 870, 871, 872, 873, 0, 0, 0, 0, + 0, 0, 880, 881, 882, 883, 884, 885, 886, 887, 888, 889, 0, + 0, 0, 0, 0, 0, 778, 779, 810, 811, 842, 843, 874, 875, + 846, 847, 0, 0, 0, 0, 0, 0, 794, 795, 826, 827, 858, + 859, 890, 891, 862, 863, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 896, 897, 898, 899, 900, 901, 902, 903, 904, 905, + 0, 0, 0, 0, 0, 0, 912, 913, 914, 915, 916, 917, 918, + 919, 920, 921, 0, 0, 0, 0, 0, 0, 928, 929, 930, 931, + 932, 933, 934, 935, 936, 937, 0, 0, 0, 0, 0, 0, 944, + 945, 946, 947, 948, 949, 950, 951, 952, 953, 0, 0, 0, 0, + 0, 0, 960, 961, 962, 963, 964, 965, 966, 967, 968, 969, 0, + 0, 0, 0, 0, 0, 976, 977, 978, 979, 980, 981, 982, 983, + 984, 985, 0, 0, 0, 0, 0, 0, 992, 993, 994, 995, 996, + 997, 998, 999, 1000, 1001, 0, 0, 0, 0, 0, 0, 1008, 1009, + 1010, 1011, 1012, 1013, 1014, 1015, 1016, 1017, 0, 0, 0, 0, 0, + 0, 906, 907, 938, 939, 970, 971, 1002, 1003, 974, 975, 0, 0, + 0, 0, 0, 0, 922, 923, 954, 955, 986, 987, 1018, 1019, 990, + 991, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 12, + 13, 268, 269, 524, 525, 780, 781, 46, 47, 0, 0, 0, 0, + 0, 0, 28, 29, 284, 285, 540, 541, 796, 797, 62, 63, 0, + 0, 0, 0, 0, 0, 44, 45, 300, 301, 556, 557, 812, 813, + 302, 303, 0, 0, 0, 0, 0, 0, 60, 61, 316, 317, 572, + 573, 828, 829, 318, 319, 0, 0, 0, 0, 0, 0, 76, 77, + 332, 333, 588, 589, 844, 845, 558, 559, 0, 0, 0, 0, 0, + 0, 92, 93, 348, 349, 604, 605, 860, 861, 574, 575, 0, 0, + 0, 0, 0, 0, 108, 109, 364, 365, 620, 621, 876, 877, 814, + 815, 0, 0, 0, 0, 0, 0, 124, 125, 380, 381, 636, 637, + 892, 893, 830, 831, 0, 0, 0, 0, 0, 0, 14, 15, 270, + 271, 526, 527, 782, 783, 110, 111, 0, 0, 0, 0, 0, 0, + 30, 31, 286, 287, 542, 543, 798, 799, 126, 127, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 140, 141, 396, 397, 652, + 653, 908, 909, 174, 175, 0, 0, 0, 0, 0, 0, 156, 157, + 412, 413, 668, 669, 924, 925, 190, 191, 0, 0, 0, 0, 0, + 0, 172, 173, 428, 429, 684, 685, 940, 941, 430, 431, 0, 0, + 0, 0, 0, 0, 188, 189, 444, 445, 700, 701, 956, 957, 446, + 447, 0, 0, 0, 0, 0, 0, 204, 205, 460, 461, 716, 717, + 972, 973, 686, 687, 0, 0, 0, 0, 0, 0, 220, 221, 476, + 477, 732, 733, 988, 989, 702, 703, 0, 0, 0, 0, 0, 0, + 236, 237, 492, 493, 748, 749, 1004, 1005, 942, 943, 0, 0, 0, + 0, 0, 0, 252, 253, 508, 509, 764, 765, 1020, 1021, 958, 959, + 0, 0, 0, 0, 0, 0, 142, 143, 398, 399, 654, 655, 910, + 911, 238, 239, 0, 0, 0, 0, 0, 0, 158, 159, 414, 415, + 670, 671, 926, 927, 254, 255}; +#endif + +#if defined(DEC_DPD2BCD) && DEC_DPD2BCD==1 && !defined(DECDPD2BCD) +#define DECDPD2BCD + +const uint16_t DPD2BCD[1024]={ 0, 1, 2, 3, 4, 5, 6, 7, + 8, 9, 128, 129, 2048, 2049, 2176, 2177, 16, 17, 18, 19, 20, + 21, 22, 23, 24, 25, 144, 145, 2064, 2065, 2192, 2193, 32, 33, + 34, 35, 36, 37, 38, 39, 40, 41, 130, 131, 2080, 2081, 2056, + 2057, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 146, 147, + 2096, 2097, 2072, 2073, 64, 65, 66, 67, 68, 69, 70, 71, 72, + 73, 132, 133, 2112, 2113, 136, 137, 80, 81, 82, 83, 84, 85, + 86, 87, 88, 89, 148, 149, 2128, 2129, 152, 153, 96, 97, 98, + 99, 100, 101, 102, 103, 104, 105, 134, 135, 2144, 2145, 2184, 2185, + 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 150, 151, 2160, + 2161, 2200, 2201, 256, 257, 258, 259, 260, 261, 262, 263, 264, 265, + 384, 385, 2304, 2305, 2432, 2433, 272, 273, 274, 275, 276, 277, 278, + 279, 280, 281, 400, 401, 2320, 2321, 2448, 2449, 288, 289, 290, 291, + 292, 293, 294, 295, 296, 297, 386, 387, 2336, 2337, 2312, 2313, 304, + 305, 306, 307, 308, 309, 310, 311, 312, 313, 402, 403, 2352, 2353, + 2328, 2329, 320, 321, 322, 323, 324, 325, 326, 327, 328, 329, 388, + 389, 2368, 2369, 392, 393, 336, 337, 338, 339, 340, 341, 342, 343, + 344, 345, 404, 405, 2384, 2385, 408, 409, 352, 353, 354, 355, 356, + 357, 358, 359, 360, 361, 390, 391, 2400, 2401, 2440, 2441, 368, 369, + 370, 371, 372, 373, 374, 375, 376, 377, 406, 407, 2416, 2417, 2456, + 2457, 512, 513, 514, 515, 516, 517, 518, 519, 520, 521, 640, 641, + 2050, 2051, 2178, 2179, 528, 529, 530, 531, 532, 533, 534, 535, 536, + 537, 656, 657, 2066, 2067, 2194, 2195, 544, 545, 546, 547, 548, 549, + 550, 551, 552, 553, 642, 643, 2082, 2083, 2088, 2089, 560, 561, 562, + 563, 564, 565, 566, 567, 568, 569, 658, 659, 2098, 2099, 2104, 2105, + 576, 577, 578, 579, 580, 581, 582, 583, 584, 585, 644, 645, 2114, + 2115, 648, 649, 592, 593, 594, 595, 596, 597, 598, 599, 600, 601, + 660, 661, 2130, 2131, 664, 665, 608, 609, 610, 611, 612, 613, 614, + 615, 616, 617, 646, 647, 2146, 2147, 2184, 2185, 624, 625, 626, 627, + 628, 629, 630, 631, 632, 633, 662, 663, 2162, 2163, 2200, 2201, 768, + 769, 770, 771, 772, 773, 774, 775, 776, 777, 896, 897, 2306, 2307, + 2434, 2435, 784, 785, 786, 787, 788, 789, 790, 791, 792, 793, 912, + 913, 2322, 2323, 2450, 2451, 800, 801, 802, 803, 804, 805, 806, 807, + 808, 809, 898, 899, 2338, 2339, 2344, 2345, 816, 817, 818, 819, 820, + 821, 822, 823, 824, 825, 914, 915, 2354, 2355, 2360, 2361, 832, 833, + 834, 835, 836, 837, 838, 839, 840, 841, 900, 901, 2370, 2371, 904, + 905, 848, 849, 850, 851, 852, 853, 854, 855, 856, 857, 916, 917, + 2386, 2387, 920, 921, 864, 865, 866, 867, 868, 869, 870, 871, 872, + 873, 902, 903, 2402, 2403, 2440, 2441, 880, 881, 882, 883, 884, 885, + 886, 887, 888, 889, 918, 919, 2418, 2419, 2456, 2457, 1024, 1025, 1026, + 1027, 1028, 1029, 1030, 1031, 1032, 1033, 1152, 1153, 2052, 2053, 2180, 2181, + 1040, 1041, 1042, 1043, 1044, 1045, 1046, 1047, 1048, 1049, 1168, 1169, 2068, + 2069, 2196, 2197, 1056, 1057, 1058, 1059, 1060, 1061, 1062, 1063, 1064, 1065, + 1154, 1155, 2084, 2085, 2120, 2121, 1072, 1073, 1074, 1075, 1076, 1077, 1078, + 1079, 1080, 1081, 1170, 1171, 2100, 2101, 2136, 2137, 1088, 1089, 1090, 1091, + 1092, 1093, 1094, 1095, 1096, 1097, 1156, 1157, 2116, 2117, 1160, 1161, 1104, + 1105, 1106, 1107, 1108, 1109, 1110, 1111, 1112, 1113, 1172, 1173, 2132, 2133, + 1176, 1177, 1120, 1121, 1122, 1123, 1124, 1125, 1126, 1127, 1128, 1129, 1158, + 1159, 2148, 2149, 2184, 2185, 1136, 1137, 1138, 1139, 1140, 1141, 1142, 1143, + 1144, 1145, 1174, 1175, 2164, 2165, 2200, 2201, 1280, 1281, 1282, 1283, 1284, + 1285, 1286, 1287, 1288, 1289, 1408, 1409, 2308, 2309, 2436, 2437, 1296, 1297, + 1298, 1299, 1300, 1301, 1302, 1303, 1304, 1305, 1424, 1425, 2324, 2325, 2452, + 2453, 1312, 1313, 1314, 1315, 1316, 1317, 1318, 1319, 1320, 1321, 1410, 1411, + 2340, 2341, 2376, 2377, 1328, 1329, 1330, 1331, 1332, 1333, 1334, 1335, 1336, + 1337, 1426, 1427, 2356, 2357, 2392, 2393, 1344, 1345, 1346, 1347, 1348, 1349, + 1350, 1351, 1352, 1353, 1412, 1413, 2372, 2373, 1416, 1417, 1360, 1361, 1362, + 1363, 1364, 1365, 1366, 1367, 1368, 1369, 1428, 1429, 2388, 2389, 1432, 1433, + 1376, 1377, 1378, 1379, 1380, 1381, 1382, 1383, 1384, 1385, 1414, 1415, 2404, + 2405, 2440, 2441, 1392, 1393, 1394, 1395, 1396, 1397, 1398, 1399, 1400, 1401, + 1430, 1431, 2420, 2421, 2456, 2457, 1536, 1537, 1538, 1539, 1540, 1541, 1542, + 1543, 1544, 1545, 1664, 1665, 2054, 2055, 2182, 2183, 1552, 1553, 1554, 1555, + 1556, 1557, 1558, 1559, 1560, 1561, 1680, 1681, 2070, 2071, 2198, 2199, 1568, + 1569, 1570, 1571, 1572, 1573, 1574, 1575, 1576, 1577, 1666, 1667, 2086, 2087, + 2152, 2153, 1584, 1585, 1586, 1587, 1588, 1589, 1590, 1591, 1592, 1593, 1682, + 1683, 2102, 2103, 2168, 2169, 1600, 1601, 1602, 1603, 1604, 1605, 1606, 1607, + 1608, 1609, 1668, 1669, 2118, 2119, 1672, 1673, 1616, 1617, 1618, 1619, 1620, + 1621, 1622, 1623, 1624, 1625, 1684, 1685, 2134, 2135, 1688, 1689, 1632, 1633, + 1634, 1635, 1636, 1637, 1638, 1639, 1640, 1641, 1670, 1671, 2150, 2151, 2184, + 2185, 1648, 1649, 1650, 1651, 1652, 1653, 1654, 1655, 1656, 1657, 1686, 1687, + 2166, 2167, 2200, 2201, 1792, 1793, 1794, 1795, 1796, 1797, 1798, 1799, 1800, + 1801, 1920, 1921, 2310, 2311, 2438, 2439, 1808, 1809, 1810, 1811, 1812, 1813, + 1814, 1815, 1816, 1817, 1936, 1937, 2326, 2327, 2454, 2455, 1824, 1825, 1826, + 1827, 1828, 1829, 1830, 1831, 1832, 1833, 1922, 1923, 2342, 2343, 2408, 2409, + 1840, 1841, 1842, 1843, 1844, 1845, 1846, 1847, 1848, 1849, 1938, 1939, 2358, + 2359, 2424, 2425, 1856, 1857, 1858, 1859, 1860, 1861, 1862, 1863, 1864, 1865, + 1924, 1925, 2374, 2375, 1928, 1929, 1872, 1873, 1874, 1875, 1876, 1877, 1878, + 1879, 1880, 1881, 1940, 1941, 2390, 2391, 1944, 1945, 1888, 1889, 1890, 1891, + 1892, 1893, 1894, 1895, 1896, 1897, 1926, 1927, 2406, 2407, 2440, 2441, 1904, + 1905, 1906, 1907, 1908, 1909, 1910, 1911, 1912, 1913, 1942, 1943, 2422, 2423, + 2456, 2457}; +#endif + +#if defined(DEC_BIN2DPD) && DEC_BIN2DPD==1 && !defined(DECBIN2DPD) +#define DECBIN2DPD + +const uint16_t BIN2DPD[1000]={ 0, 1, 2, 3, 4, 5, 6, 7, + 8, 9, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 32, + 33, 34, 35, 36, 37, 38, 39, 40, 41, 48, 49, 50, 51, + 52, 53, 54, 55, 56, 57, 64, 65, 66, 67, 68, 69, 70, + 71, 72, 73, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, + 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 112, 113, 114, + 115, 116, 117, 118, 119, 120, 121, 10, 11, 42, 43, 74, 75, + 106, 107, 78, 79, 26, 27, 58, 59, 90, 91, 122, 123, 94, + 95, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 144, 145, + 146, 147, 148, 149, 150, 151, 152, 153, 160, 161, 162, 163, 164, + 165, 166, 167, 168, 169, 176, 177, 178, 179, 180, 181, 182, 183, + 184, 185, 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 208, + 209, 210, 211, 212, 213, 214, 215, 216, 217, 224, 225, 226, 227, + 228, 229, 230, 231, 232, 233, 240, 241, 242, 243, 244, 245, 246, + 247, 248, 249, 138, 139, 170, 171, 202, 203, 234, 235, 206, 207, + 154, 155, 186, 187, 218, 219, 250, 251, 222, 223, 256, 257, 258, + 259, 260, 261, 262, 263, 264, 265, 272, 273, 274, 275, 276, 277, + 278, 279, 280, 281, 288, 289, 290, 291, 292, 293, 294, 295, 296, + 297, 304, 305, 306, 307, 308, 309, 310, 311, 312, 313, 320, 321, + 322, 323, 324, 325, 326, 327, 328, 329, 336, 337, 338, 339, 340, + 341, 342, 343, 344, 345, 352, 353, 354, 355, 356, 357, 358, 359, + 360, 361, 368, 369, 370, 371, 372, 373, 374, 375, 376, 377, 266, + 267, 298, 299, 330, 331, 362, 363, 334, 335, 282, 283, 314, 315, + 346, 347, 378, 379, 350, 351, 384, 385, 386, 387, 388, 389, 390, + 391, 392, 393, 400, 401, 402, 403, 404, 405, 406, 407, 408, 409, + 416, 417, 418, 419, 420, 421, 422, 423, 424, 425, 432, 433, 434, + 435, 436, 437, 438, 439, 440, 441, 448, 449, 450, 451, 452, 453, + 454, 455, 456, 457, 464, 465, 466, 467, 468, 469, 470, 471, 472, + 473, 480, 481, 482, 483, 484, 485, 486, 487, 488, 489, 496, 497, + 498, 499, 500, 501, 502, 503, 504, 505, 394, 395, 426, 427, 458, + 459, 490, 491, 462, 463, 410, 411, 442, 443, 474, 475, 506, 507, + 478, 479, 512, 513, 514, 515, 516, 517, 518, 519, 520, 521, 528, + 529, 530, 531, 532, 533, 534, 535, 536, 537, 544, 545, 546, 547, + 548, 549, 550, 551, 552, 553, 560, 561, 562, 563, 564, 565, 566, + 567, 568, 569, 576, 577, 578, 579, 580, 581, 582, 583, 584, 585, + 592, 593, 594, 595, 596, 597, 598, 599, 600, 601, 608, 609, 610, + 611, 612, 613, 614, 615, 616, 617, 624, 625, 626, 627, 628, 629, + 630, 631, 632, 633, 522, 523, 554, 555, 586, 587, 618, 619, 590, + 591, 538, 539, 570, 571, 602, 603, 634, 635, 606, 607, 640, 641, + 642, 643, 644, 645, 646, 647, 648, 649, 656, 657, 658, 659, 660, + 661, 662, 663, 664, 665, 672, 673, 674, 675, 676, 677, 678, 679, + 680, 681, 688, 689, 690, 691, 692, 693, 694, 695, 696, 697, 704, + 705, 706, 707, 708, 709, 710, 711, 712, 713, 720, 721, 722, 723, + 724, 725, 726, 727, 728, 729, 736, 737, 738, 739, 740, 741, 742, + 743, 744, 745, 752, 753, 754, 755, 756, 757, 758, 759, 760, 761, + 650, 651, 682, 683, 714, 715, 746, 747, 718, 719, 666, 667, 698, + 699, 730, 731, 762, 763, 734, 735, 768, 769, 770, 771, 772, 773, + 774, 775, 776, 777, 784, 785, 786, 787, 788, 789, 790, 791, 792, + 793, 800, 801, 802, 803, 804, 805, 806, 807, 808, 809, 816, 817, + 818, 819, 820, 821, 822, 823, 824, 825, 832, 833, 834, 835, 836, + 837, 838, 839, 840, 841, 848, 849, 850, 851, 852, 853, 854, 855, + 856, 857, 864, 865, 866, 867, 868, 869, 870, 871, 872, 873, 880, + 881, 882, 883, 884, 885, 886, 887, 888, 889, 778, 779, 810, 811, + 842, 843, 874, 875, 846, 847, 794, 795, 826, 827, 858, 859, 890, + 891, 862, 863, 896, 897, 898, 899, 900, 901, 902, 903, 904, 905, + 912, 913, 914, 915, 916, 917, 918, 919, 920, 921, 928, 929, 930, + 931, 932, 933, 934, 935, 936, 937, 944, 945, 946, 947, 948, 949, + 950, 951, 952, 953, 960, 961, 962, 963, 964, 965, 966, 967, 968, + 969, 976, 977, 978, 979, 980, 981, 982, 983, 984, 985, 992, 993, + 994, 995, 996, 997, 998, 999, 1000, 1001, 1008, 1009, 1010, 1011, 1012, + 1013, 1014, 1015, 1016, 1017, 906, 907, 938, 939, 970, 971, 1002, 1003, + 974, 975, 922, 923, 954, 955, 986, 987, 1018, 1019, 990, 991, 12, + 13, 268, 269, 524, 525, 780, 781, 46, 47, 28, 29, 284, 285, + 540, 541, 796, 797, 62, 63, 44, 45, 300, 301, 556, 557, 812, + 813, 302, 303, 60, 61, 316, 317, 572, 573, 828, 829, 318, 319, + 76, 77, 332, 333, 588, 589, 844, 845, 558, 559, 92, 93, 348, + 349, 604, 605, 860, 861, 574, 575, 108, 109, 364, 365, 620, 621, + 876, 877, 814, 815, 124, 125, 380, 381, 636, 637, 892, 893, 830, + 831, 14, 15, 270, 271, 526, 527, 782, 783, 110, 111, 30, 31, + 286, 287, 542, 543, 798, 799, 126, 127, 140, 141, 396, 397, 652, + 653, 908, 909, 174, 175, 156, 157, 412, 413, 668, 669, 924, 925, + 190, 191, 172, 173, 428, 429, 684, 685, 940, 941, 430, 431, 188, + 189, 444, 445, 700, 701, 956, 957, 446, 447, 204, 205, 460, 461, + 716, 717, 972, 973, 686, 687, 220, 221, 476, 477, 732, 733, 988, + 989, 702, 703, 236, 237, 492, 493, 748, 749, 1004, 1005, 942, 943, + 252, 253, 508, 509, 764, 765, 1020, 1021, 958, 959, 142, 143, 398, + 399, 654, 655, 910, 911, 238, 239, 158, 159, 414, 415, 670, 671, + 926, 927, 254, 255}; +#endif + +#if defined(DEC_DPD2BIN) && DEC_DPD2BIN==1 && !defined(DECDPD2BIN) +#define DECDPD2BIN + +const uint16_t DPD2BIN[1024]={ 0, 1, 2, 3, 4, 5, 6, 7, + 8, 9, 80, 81, 800, 801, 880, 881, 10, 11, 12, 13, 14, + 15, 16, 17, 18, 19, 90, 91, 810, 811, 890, 891, 20, 21, + 22, 23, 24, 25, 26, 27, 28, 29, 82, 83, 820, 821, 808, + 809, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 92, 93, + 830, 831, 818, 819, 40, 41, 42, 43, 44, 45, 46, 47, 48, + 49, 84, 85, 840, 841, 88, 89, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 94, 95, 850, 851, 98, 99, 60, 61, 62, + 63, 64, 65, 66, 67, 68, 69, 86, 87, 860, 861, 888, 889, + 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 96, 97, 870, + 871, 898, 899, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, + 180, 181, 900, 901, 980, 981, 110, 111, 112, 113, 114, 115, 116, + 117, 118, 119, 190, 191, 910, 911, 990, 991, 120, 121, 122, 123, + 124, 125, 126, 127, 128, 129, 182, 183, 920, 921, 908, 909, 130, + 131, 132, 133, 134, 135, 136, 137, 138, 139, 192, 193, 930, 931, + 918, 919, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 184, + 185, 940, 941, 188, 189, 150, 151, 152, 153, 154, 155, 156, 157, + 158, 159, 194, 195, 950, 951, 198, 199, 160, 161, 162, 163, 164, + 165, 166, 167, 168, 169, 186, 187, 960, 961, 988, 989, 170, 171, + 172, 173, 174, 175, 176, 177, 178, 179, 196, 197, 970, 971, 998, + 999, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, 280, 281, + 802, 803, 882, 883, 210, 211, 212, 213, 214, 215, 216, 217, 218, + 219, 290, 291, 812, 813, 892, 893, 220, 221, 222, 223, 224, 225, + 226, 227, 228, 229, 282, 283, 822, 823, 828, 829, 230, 231, 232, + 233, 234, 235, 236, 237, 238, 239, 292, 293, 832, 833, 838, 839, + 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 284, 285, 842, + 843, 288, 289, 250, 251, 252, 253, 254, 255, 256, 257, 258, 259, + 294, 295, 852, 853, 298, 299, 260, 261, 262, 263, 264, 265, 266, + 267, 268, 269, 286, 287, 862, 863, 888, 889, 270, 271, 272, 273, + 274, 275, 276, 277, 278, 279, 296, 297, 872, 873, 898, 899, 300, + 301, 302, 303, 304, 305, 306, 307, 308, 309, 380, 381, 902, 903, + 982, 983, 310, 311, 312, 313, 314, 315, 316, 317, 318, 319, 390, + 391, 912, 913, 992, 993, 320, 321, 322, 323, 324, 325, 326, 327, + 328, 329, 382, 383, 922, 923, 928, 929, 330, 331, 332, 333, 334, + 335, 336, 337, 338, 339, 392, 393, 932, 933, 938, 939, 340, 341, + 342, 343, 344, 345, 346, 347, 348, 349, 384, 385, 942, 943, 388, + 389, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 394, 395, + 952, 953, 398, 399, 360, 361, 362, 363, 364, 365, 366, 367, 368, + 369, 386, 387, 962, 963, 988, 989, 370, 371, 372, 373, 374, 375, + 376, 377, 378, 379, 396, 397, 972, 973, 998, 999, 400, 401, 402, + 403, 404, 405, 406, 407, 408, 409, 480, 481, 804, 805, 884, 885, + 410, 411, 412, 413, 414, 415, 416, 417, 418, 419, 490, 491, 814, + 815, 894, 895, 420, 421, 422, 423, 424, 425, 426, 427, 428, 429, + 482, 483, 824, 825, 848, 849, 430, 431, 432, 433, 434, 435, 436, + 437, 438, 439, 492, 493, 834, 835, 858, 859, 440, 441, 442, 443, + 444, 445, 446, 447, 448, 449, 484, 485, 844, 845, 488, 489, 450, + 451, 452, 453, 454, 455, 456, 457, 458, 459, 494, 495, 854, 855, + 498, 499, 460, 461, 462, 463, 464, 465, 466, 467, 468, 469, 486, + 487, 864, 865, 888, 889, 470, 471, 472, 473, 474, 475, 476, 477, + 478, 479, 496, 497, 874, 875, 898, 899, 500, 501, 502, 503, 504, + 505, 506, 507, 508, 509, 580, 581, 904, 905, 984, 985, 510, 511, + 512, 513, 514, 515, 516, 517, 518, 519, 590, 591, 914, 915, 994, + 995, 520, 521, 522, 523, 524, 525, 526, 527, 528, 529, 582, 583, + 924, 925, 948, 949, 530, 531, 532, 533, 534, 535, 536, 537, 538, + 539, 592, 593, 934, 935, 958, 959, 540, 541, 542, 543, 544, 545, + 546, 547, 548, 549, 584, 585, 944, 945, 588, 589, 550, 551, 552, + 553, 554, 555, 556, 557, 558, 559, 594, 595, 954, 955, 598, 599, + 560, 561, 562, 563, 564, 565, 566, 567, 568, 569, 586, 587, 964, + 965, 988, 989, 570, 571, 572, 573, 574, 575, 576, 577, 578, 579, + 596, 597, 974, 975, 998, 999, 600, 601, 602, 603, 604, 605, 606, + 607, 608, 609, 680, 681, 806, 807, 886, 887, 610, 611, 612, 613, + 614, 615, 616, 617, 618, 619, 690, 691, 816, 817, 896, 897, 620, + 621, 622, 623, 624, 625, 626, 627, 628, 629, 682, 683, 826, 827, + 868, 869, 630, 631, 632, 633, 634, 635, 636, 637, 638, 639, 692, + 693, 836, 837, 878, 879, 640, 641, 642, 643, 644, 645, 646, 647, + 648, 649, 684, 685, 846, 847, 688, 689, 650, 651, 652, 653, 654, + 655, 656, 657, 658, 659, 694, 695, 856, 857, 698, 699, 660, 661, + 662, 663, 664, 665, 666, 667, 668, 669, 686, 687, 866, 867, 888, + 889, 670, 671, 672, 673, 674, 675, 676, 677, 678, 679, 696, 697, + 876, 877, 898, 899, 700, 701, 702, 703, 704, 705, 706, 707, 708, + 709, 780, 781, 906, 907, 986, 987, 710, 711, 712, 713, 714, 715, + 716, 717, 718, 719, 790, 791, 916, 917, 996, 997, 720, 721, 722, + 723, 724, 725, 726, 727, 728, 729, 782, 783, 926, 927, 968, 969, + 730, 731, 732, 733, 734, 735, 736, 737, 738, 739, 792, 793, 936, + 937, 978, 979, 740, 741, 742, 743, 744, 745, 746, 747, 748, 749, + 784, 785, 946, 947, 788, 789, 750, 751, 752, 753, 754, 755, 756, + 757, 758, 759, 794, 795, 956, 957, 798, 799, 760, 761, 762, 763, + 764, 765, 766, 767, 768, 769, 786, 787, 966, 967, 988, 989, 770, + 771, 772, 773, 774, 775, 776, 777, 778, 779, 796, 797, 976, 977, + 998, 999}; +#endif + +#if defined(DEC_DPD2BINK) && DEC_DPD2BINK==1 && !defined(DECDPD2BINK) +#define DECDPD2BINK + +const uint32_t DPD2BINK[1024]={ 0, 1000, 2000, 3000, 4000, 5000, + 6000, 7000, 8000, 9000, 80000, 81000, 800000, 801000, 880000, 881000, + 10000, 11000, 12000, 13000, 14000, 15000, 16000, 17000, 18000, 19000, + 90000, 91000, 810000, 811000, 890000, 891000, 20000, 21000, 22000, 23000, + 24000, 25000, 26000, 27000, 28000, 29000, 82000, 83000, 820000, 821000, + 808000, 809000, 30000, 31000, 32000, 33000, 34000, 35000, 36000, 37000, + 38000, 39000, 92000, 93000, 830000, 831000, 818000, 819000, 40000, 41000, + 42000, 43000, 44000, 45000, 46000, 47000, 48000, 49000, 84000, 85000, + 840000, 841000, 88000, 89000, 50000, 51000, 52000, 53000, 54000, 55000, + 56000, 57000, 58000, 59000, 94000, 95000, 850000, 851000, 98000, 99000, + 60000, 61000, 62000, 63000, 64000, 65000, 66000, 67000, 68000, 69000, + 86000, 87000, 860000, 861000, 888000, 889000, 70000, 71000, 72000, 73000, + 74000, 75000, 76000, 77000, 78000, 79000, 96000, 97000, 870000, 871000, + 898000, 899000, 100000, 101000, 102000, 103000, 104000, 105000, 106000, 107000, + 108000, 109000, 180000, 181000, 900000, 901000, 980000, 981000, 110000, 111000, + 112000, 113000, 114000, 115000, 116000, 117000, 118000, 119000, 190000, 191000, + 910000, 911000, 990000, 991000, 120000, 121000, 122000, 123000, 124000, 125000, + 126000, 127000, 128000, 129000, 182000, 183000, 920000, 921000, 908000, 909000, + 130000, 131000, 132000, 133000, 134000, 135000, 136000, 137000, 138000, 139000, + 192000, 193000, 930000, 931000, 918000, 919000, 140000, 141000, 142000, 143000, + 144000, 145000, 146000, 147000, 148000, 149000, 184000, 185000, 940000, 941000, + 188000, 189000, 150000, 151000, 152000, 153000, 154000, 155000, 156000, 157000, + 158000, 159000, 194000, 195000, 950000, 951000, 198000, 199000, 160000, 161000, + 162000, 163000, 164000, 165000, 166000, 167000, 168000, 169000, 186000, 187000, + 960000, 961000, 988000, 989000, 170000, 171000, 172000, 173000, 174000, 175000, + 176000, 177000, 178000, 179000, 196000, 197000, 970000, 971000, 998000, 999000, + 200000, 201000, 202000, 203000, 204000, 205000, 206000, 207000, 208000, 209000, + 280000, 281000, 802000, 803000, 882000, 883000, 210000, 211000, 212000, 213000, + 214000, 215000, 216000, 217000, 218000, 219000, 290000, 291000, 812000, 813000, + 892000, 893000, 220000, 221000, 222000, 223000, 224000, 225000, 226000, 227000, + 228000, 229000, 282000, 283000, 822000, 823000, 828000, 829000, 230000, 231000, + 232000, 233000, 234000, 235000, 236000, 237000, 238000, 239000, 292000, 293000, + 832000, 833000, 838000, 839000, 240000, 241000, 242000, 243000, 244000, 245000, + 246000, 247000, 248000, 249000, 284000, 285000, 842000, 843000, 288000, 289000, + 250000, 251000, 252000, 253000, 254000, 255000, 256000, 257000, 258000, 259000, + 294000, 295000, 852000, 853000, 298000, 299000, 260000, 261000, 262000, 263000, + 264000, 265000, 266000, 267000, 268000, 269000, 286000, 287000, 862000, 863000, + 888000, 889000, 270000, 271000, 272000, 273000, 274000, 275000, 276000, 277000, + 278000, 279000, 296000, 297000, 872000, 873000, 898000, 899000, 300000, 301000, + 302000, 303000, 304000, 305000, 306000, 307000, 308000, 309000, 380000, 381000, + 902000, 903000, 982000, 983000, 310000, 311000, 312000, 313000, 314000, 315000, + 316000, 317000, 318000, 319000, 390000, 391000, 912000, 913000, 992000, 993000, + 320000, 321000, 322000, 323000, 324000, 325000, 326000, 327000, 328000, 329000, + 382000, 383000, 922000, 923000, 928000, 929000, 330000, 331000, 332000, 333000, + 334000, 335000, 336000, 337000, 338000, 339000, 392000, 393000, 932000, 933000, + 938000, 939000, 340000, 341000, 342000, 343000, 344000, 345000, 346000, 347000, + 348000, 349000, 384000, 385000, 942000, 943000, 388000, 389000, 350000, 351000, + 352000, 353000, 354000, 355000, 356000, 357000, 358000, 359000, 394000, 395000, + 952000, 953000, 398000, 399000, 360000, 361000, 362000, 363000, 364000, 365000, + 366000, 367000, 368000, 369000, 386000, 387000, 962000, 963000, 988000, 989000, + 370000, 371000, 372000, 373000, 374000, 375000, 376000, 377000, 378000, 379000, + 396000, 397000, 972000, 973000, 998000, 999000, 400000, 401000, 402000, 403000, + 404000, 405000, 406000, 407000, 408000, 409000, 480000, 481000, 804000, 805000, + 884000, 885000, 410000, 411000, 412000, 413000, 414000, 415000, 416000, 417000, + 418000, 419000, 490000, 491000, 814000, 815000, 894000, 895000, 420000, 421000, + 422000, 423000, 424000, 425000, 426000, 427000, 428000, 429000, 482000, 483000, + 824000, 825000, 848000, 849000, 430000, 431000, 432000, 433000, 434000, 435000, + 436000, 437000, 438000, 439000, 492000, 493000, 834000, 835000, 858000, 859000, + 440000, 441000, 442000, 443000, 444000, 445000, 446000, 447000, 448000, 449000, + 484000, 485000, 844000, 845000, 488000, 489000, 450000, 451000, 452000, 453000, + 454000, 455000, 456000, 457000, 458000, 459000, 494000, 495000, 854000, 855000, + 498000, 499000, 460000, 461000, 462000, 463000, 464000, 465000, 466000, 467000, + 468000, 469000, 486000, 487000, 864000, 865000, 888000, 889000, 470000, 471000, + 472000, 473000, 474000, 475000, 476000, 477000, 478000, 479000, 496000, 497000, + 874000, 875000, 898000, 899000, 500000, 501000, 502000, 503000, 504000, 505000, + 506000, 507000, 508000, 509000, 580000, 581000, 904000, 905000, 984000, 985000, + 510000, 511000, 512000, 513000, 514000, 515000, 516000, 517000, 518000, 519000, + 590000, 591000, 914000, 915000, 994000, 995000, 520000, 521000, 522000, 523000, + 524000, 525000, 526000, 527000, 528000, 529000, 582000, 583000, 924000, 925000, + 948000, 949000, 530000, 531000, 532000, 533000, 534000, 535000, 536000, 537000, + 538000, 539000, 592000, 593000, 934000, 935000, 958000, 959000, 540000, 541000, + 542000, 543000, 544000, 545000, 546000, 547000, 548000, 549000, 584000, 585000, + 944000, 945000, 588000, 589000, 550000, 551000, 552000, 553000, 554000, 555000, + 556000, 557000, 558000, 559000, 594000, 595000, 954000, 955000, 598000, 599000, + 560000, 561000, 562000, 563000, 564000, 565000, 566000, 567000, 568000, 569000, + 586000, 587000, 964000, 965000, 988000, 989000, 570000, 571000, 572000, 573000, + 574000, 575000, 576000, 577000, 578000, 579000, 596000, 597000, 974000, 975000, + 998000, 999000, 600000, 601000, 602000, 603000, 604000, 605000, 606000, 607000, + 608000, 609000, 680000, 681000, 806000, 807000, 886000, 887000, 610000, 611000, + 612000, 613000, 614000, 615000, 616000, 617000, 618000, 619000, 690000, 691000, + 816000, 817000, 896000, 897000, 620000, 621000, 622000, 623000, 624000, 625000, + 626000, 627000, 628000, 629000, 682000, 683000, 826000, 827000, 868000, 869000, + 630000, 631000, 632000, 633000, 634000, 635000, 636000, 637000, 638000, 639000, + 692000, 693000, 836000, 837000, 878000, 879000, 640000, 641000, 642000, 643000, + 644000, 645000, 646000, 647000, 648000, 649000, 684000, 685000, 846000, 847000, + 688000, 689000, 650000, 651000, 652000, 653000, 654000, 655000, 656000, 657000, + 658000, 659000, 694000, 695000, 856000, 857000, 698000, 699000, 660000, 661000, + 662000, 663000, 664000, 665000, 666000, 667000, 668000, 669000, 686000, 687000, + 866000, 867000, 888000, 889000, 670000, 671000, 672000, 673000, 674000, 675000, + 676000, 677000, 678000, 679000, 696000, 697000, 876000, 877000, 898000, 899000, + 700000, 701000, 702000, 703000, 704000, 705000, 706000, 707000, 708000, 709000, + 780000, 781000, 906000, 907000, 986000, 987000, 710000, 711000, 712000, 713000, + 714000, 715000, 716000, 717000, 718000, 719000, 790000, 791000, 916000, 917000, + 996000, 997000, 720000, 721000, 722000, 723000, 724000, 725000, 726000, 727000, + 728000, 729000, 782000, 783000, 926000, 927000, 968000, 969000, 730000, 731000, + 732000, 733000, 734000, 735000, 736000, 737000, 738000, 739000, 792000, 793000, + 936000, 937000, 978000, 979000, 740000, 741000, 742000, 743000, 744000, 745000, + 746000, 747000, 748000, 749000, 784000, 785000, 946000, 947000, 788000, 789000, + 750000, 751000, 752000, 753000, 754000, 755000, 756000, 757000, 758000, 759000, + 794000, 795000, 956000, 957000, 798000, 799000, 760000, 761000, 762000, 763000, + 764000, 765000, 766000, 767000, 768000, 769000, 786000, 787000, 966000, 967000, + 988000, 989000, 770000, 771000, 772000, 773000, 774000, 775000, 776000, 777000, + 778000, 779000, 796000, 797000, 976000, 977000, 998000, 999000}; +#endif + +#if defined(DEC_DPD2BINM) && DEC_DPD2BINM==1 && !defined(DECDPD2BINM) +#define DECDPD2BINM + +const uint32_t DPD2BINM[1024]={0, 1000000, 2000000, 3000000, 4000000, + 5000000, 6000000, 7000000, 8000000, 9000000, 80000000, 81000000, + 800000000, 801000000, 880000000, 881000000, 10000000, 11000000, 12000000, + 13000000, 14000000, 15000000, 16000000, 17000000, 18000000, 19000000, + 90000000, 91000000, 810000000, 811000000, 890000000, 891000000, 20000000, + 21000000, 22000000, 23000000, 24000000, 25000000, 26000000, 27000000, + 28000000, 29000000, 82000000, 83000000, 820000000, 821000000, 808000000, + 809000000, 30000000, 31000000, 32000000, 33000000, 34000000, 35000000, + 36000000, 37000000, 38000000, 39000000, 92000000, 93000000, 830000000, + 831000000, 818000000, 819000000, 40000000, 41000000, 42000000, 43000000, + 44000000, 45000000, 46000000, 47000000, 48000000, 49000000, 84000000, + 85000000, 840000000, 841000000, 88000000, 89000000, 50000000, 51000000, + 52000000, 53000000, 54000000, 55000000, 56000000, 57000000, 58000000, + 59000000, 94000000, 95000000, 850000000, 851000000, 98000000, 99000000, + 60000000, 61000000, 62000000, 63000000, 64000000, 65000000, 66000000, + 67000000, 68000000, 69000000, 86000000, 87000000, 860000000, 861000000, + 888000000, 889000000, 70000000, 71000000, 72000000, 73000000, 74000000, + 75000000, 76000000, 77000000, 78000000, 79000000, 96000000, 97000000, + 870000000, 871000000, 898000000, 899000000, 100000000, 101000000, 102000000, + 103000000, 104000000, 105000000, 106000000, 107000000, 108000000, 109000000, + 180000000, 181000000, 900000000, 901000000, 980000000, 981000000, 110000000, + 111000000, 112000000, 113000000, 114000000, 115000000, 116000000, 117000000, + 118000000, 119000000, 190000000, 191000000, 910000000, 911000000, 990000000, + 991000000, 120000000, 121000000, 122000000, 123000000, 124000000, 125000000, + 126000000, 127000000, 128000000, 129000000, 182000000, 183000000, 920000000, + 921000000, 908000000, 909000000, 130000000, 131000000, 132000000, 133000000, + 134000000, 135000000, 136000000, 137000000, 138000000, 139000000, 192000000, + 193000000, 930000000, 931000000, 918000000, 919000000, 140000000, 141000000, + 142000000, 143000000, 144000000, 145000000, 146000000, 147000000, 148000000, + 149000000, 184000000, 185000000, 940000000, 941000000, 188000000, 189000000, + 150000000, 151000000, 152000000, 153000000, 154000000, 155000000, 156000000, + 157000000, 158000000, 159000000, 194000000, 195000000, 950000000, 951000000, + 198000000, 199000000, 160000000, 161000000, 162000000, 163000000, 164000000, + 165000000, 166000000, 167000000, 168000000, 169000000, 186000000, 187000000, + 960000000, 961000000, 988000000, 989000000, 170000000, 171000000, 172000000, + 173000000, 174000000, 175000000, 176000000, 177000000, 178000000, 179000000, + 196000000, 197000000, 970000000, 971000000, 998000000, 999000000, 200000000, + 201000000, 202000000, 203000000, 204000000, 205000000, 206000000, 207000000, + 208000000, 209000000, 280000000, 281000000, 802000000, 803000000, 882000000, + 883000000, 210000000, 211000000, 212000000, 213000000, 214000000, 215000000, + 216000000, 217000000, 218000000, 219000000, 290000000, 291000000, 812000000, + 813000000, 892000000, 893000000, 220000000, 221000000, 222000000, 223000000, + 224000000, 225000000, 226000000, 227000000, 228000000, 229000000, 282000000, + 283000000, 822000000, 823000000, 828000000, 829000000, 230000000, 231000000, + 232000000, 233000000, 234000000, 235000000, 236000000, 237000000, 238000000, + 239000000, 292000000, 293000000, 832000000, 833000000, 838000000, 839000000, + 240000000, 241000000, 242000000, 243000000, 244000000, 245000000, 246000000, + 247000000, 248000000, 249000000, 284000000, 285000000, 842000000, 843000000, + 288000000, 289000000, 250000000, 251000000, 252000000, 253000000, 254000000, + 255000000, 256000000, 257000000, 258000000, 259000000, 294000000, 295000000, + 852000000, 853000000, 298000000, 299000000, 260000000, 261000000, 262000000, + 263000000, 264000000, 265000000, 266000000, 267000000, 268000000, 269000000, + 286000000, 287000000, 862000000, 863000000, 888000000, 889000000, 270000000, + 271000000, 272000000, 273000000, 274000000, 275000000, 276000000, 277000000, + 278000000, 279000000, 296000000, 297000000, 872000000, 873000000, 898000000, + 899000000, 300000000, 301000000, 302000000, 303000000, 304000000, 305000000, + 306000000, 307000000, 308000000, 309000000, 380000000, 381000000, 902000000, + 903000000, 982000000, 983000000, 310000000, 311000000, 312000000, 313000000, + 314000000, 315000000, 316000000, 317000000, 318000000, 319000000, 390000000, + 391000000, 912000000, 913000000, 992000000, 993000000, 320000000, 321000000, + 322000000, 323000000, 324000000, 325000000, 326000000, 327000000, 328000000, + 329000000, 382000000, 383000000, 922000000, 923000000, 928000000, 929000000, + 330000000, 331000000, 332000000, 333000000, 334000000, 335000000, 336000000, + 337000000, 338000000, 339000000, 392000000, 393000000, 932000000, 933000000, + 938000000, 939000000, 340000000, 341000000, 342000000, 343000000, 344000000, + 345000000, 346000000, 347000000, 348000000, 349000000, 384000000, 385000000, + 942000000, 943000000, 388000000, 389000000, 350000000, 351000000, 352000000, + 353000000, 354000000, 355000000, 356000000, 357000000, 358000000, 359000000, + 394000000, 395000000, 952000000, 953000000, 398000000, 399000000, 360000000, + 361000000, 362000000, 363000000, 364000000, 365000000, 366000000, 367000000, + 368000000, 369000000, 386000000, 387000000, 962000000, 963000000, 988000000, + 989000000, 370000000, 371000000, 372000000, 373000000, 374000000, 375000000, + 376000000, 377000000, 378000000, 379000000, 396000000, 397000000, 972000000, + 973000000, 998000000, 999000000, 400000000, 401000000, 402000000, 403000000, + 404000000, 405000000, 406000000, 407000000, 408000000, 409000000, 480000000, + 481000000, 804000000, 805000000, 884000000, 885000000, 410000000, 411000000, + 412000000, 413000000, 414000000, 415000000, 416000000, 417000000, 418000000, + 419000000, 490000000, 491000000, 814000000, 815000000, 894000000, 895000000, + 420000000, 421000000, 422000000, 423000000, 424000000, 425000000, 426000000, + 427000000, 428000000, 429000000, 482000000, 483000000, 824000000, 825000000, + 848000000, 849000000, 430000000, 431000000, 432000000, 433000000, 434000000, + 435000000, 436000000, 437000000, 438000000, 439000000, 492000000, 493000000, + 834000000, 835000000, 858000000, 859000000, 440000000, 441000000, 442000000, + 443000000, 444000000, 445000000, 446000000, 447000000, 448000000, 449000000, + 484000000, 485000000, 844000000, 845000000, 488000000, 489000000, 450000000, + 451000000, 452000000, 453000000, 454000000, 455000000, 456000000, 457000000, + 458000000, 459000000, 494000000, 495000000, 854000000, 855000000, 498000000, + 499000000, 460000000, 461000000, 462000000, 463000000, 464000000, 465000000, + 466000000, 467000000, 468000000, 469000000, 486000000, 487000000, 864000000, + 865000000, 888000000, 889000000, 470000000, 471000000, 472000000, 473000000, + 474000000, 475000000, 476000000, 477000000, 478000000, 479000000, 496000000, + 497000000, 874000000, 875000000, 898000000, 899000000, 500000000, 501000000, + 502000000, 503000000, 504000000, 505000000, 506000000, 507000000, 508000000, + 509000000, 580000000, 581000000, 904000000, 905000000, 984000000, 985000000, + 510000000, 511000000, 512000000, 513000000, 514000000, 515000000, 516000000, + 517000000, 518000000, 519000000, 590000000, 591000000, 914000000, 915000000, + 994000000, 995000000, 520000000, 521000000, 522000000, 523000000, 524000000, + 525000000, 526000000, 527000000, 528000000, 529000000, 582000000, 583000000, + 924000000, 925000000, 948000000, 949000000, 530000000, 531000000, 532000000, + 533000000, 534000000, 535000000, 536000000, 537000000, 538000000, 539000000, + 592000000, 593000000, 934000000, 935000000, 958000000, 959000000, 540000000, + 541000000, 542000000, 543000000, 544000000, 545000000, 546000000, 547000000, + 548000000, 549000000, 584000000, 585000000, 944000000, 945000000, 588000000, + 589000000, 550000000, 551000000, 552000000, 553000000, 554000000, 555000000, + 556000000, 557000000, 558000000, 559000000, 594000000, 595000000, 954000000, + 955000000, 598000000, 599000000, 560000000, 561000000, 562000000, 563000000, + 564000000, 565000000, 566000000, 567000000, 568000000, 569000000, 586000000, + 587000000, 964000000, 965000000, 988000000, 989000000, 570000000, 571000000, + 572000000, 573000000, 574000000, 575000000, 576000000, 577000000, 578000000, + 579000000, 596000000, 597000000, 974000000, 975000000, 998000000, 999000000, + 600000000, 601000000, 602000000, 603000000, 604000000, 605000000, 606000000, + 607000000, 608000000, 609000000, 680000000, 681000000, 806000000, 807000000, + 886000000, 887000000, 610000000, 611000000, 612000000, 613000000, 614000000, + 615000000, 616000000, 617000000, 618000000, 619000000, 690000000, 691000000, + 816000000, 817000000, 896000000, 897000000, 620000000, 621000000, 622000000, + 623000000, 624000000, 625000000, 626000000, 627000000, 628000000, 629000000, + 682000000, 683000000, 826000000, 827000000, 868000000, 869000000, 630000000, + 631000000, 632000000, 633000000, 634000000, 635000000, 636000000, 637000000, + 638000000, 639000000, 692000000, 693000000, 836000000, 837000000, 878000000, + 879000000, 640000000, 641000000, 642000000, 643000000, 644000000, 645000000, + 646000000, 647000000, 648000000, 649000000, 684000000, 685000000, 846000000, + 847000000, 688000000, 689000000, 650000000, 651000000, 652000000, 653000000, + 654000000, 655000000, 656000000, 657000000, 658000000, 659000000, 694000000, + 695000000, 856000000, 857000000, 698000000, 699000000, 660000000, 661000000, + 662000000, 663000000, 664000000, 665000000, 666000000, 667000000, 668000000, + 669000000, 686000000, 687000000, 866000000, 867000000, 888000000, 889000000, + 670000000, 671000000, 672000000, 673000000, 674000000, 675000000, 676000000, + 677000000, 678000000, 679000000, 696000000, 697000000, 876000000, 877000000, + 898000000, 899000000, 700000000, 701000000, 702000000, 703000000, 704000000, + 705000000, 706000000, 707000000, 708000000, 709000000, 780000000, 781000000, + 906000000, 907000000, 986000000, 987000000, 710000000, 711000000, 712000000, + 713000000, 714000000, 715000000, 716000000, 717000000, 718000000, 719000000, + 790000000, 791000000, 916000000, 917000000, 996000000, 997000000, 720000000, + 721000000, 722000000, 723000000, 724000000, 725000000, 726000000, 727000000, + 728000000, 729000000, 782000000, 783000000, 926000000, 927000000, 968000000, + 969000000, 730000000, 731000000, 732000000, 733000000, 734000000, 735000000, + 736000000, 737000000, 738000000, 739000000, 792000000, 793000000, 936000000, + 937000000, 978000000, 979000000, 740000000, 741000000, 742000000, 743000000, + 744000000, 745000000, 746000000, 747000000, 748000000, 749000000, 784000000, + 785000000, 946000000, 947000000, 788000000, 789000000, 750000000, 751000000, + 752000000, 753000000, 754000000, 755000000, 756000000, 757000000, 758000000, + 759000000, 794000000, 795000000, 956000000, 957000000, 798000000, 799000000, + 760000000, 761000000, 762000000, 763000000, 764000000, 765000000, 766000000, + 767000000, 768000000, 769000000, 786000000, 787000000, 966000000, 967000000, + 988000000, 989000000, 770000000, 771000000, 772000000, 773000000, 774000000, + 775000000, 776000000, 777000000, 778000000, 779000000, 796000000, 797000000, + 976000000, 977000000, 998000000, 999000000}; +#endif + +#if defined(DEC_BIN2CHAR) && DEC_BIN2CHAR==1 && !defined(DECBIN2CHAR) +#define DECBIN2CHAR + +const uint8_t BIN2CHAR[4001]={ + '\0','0','0','0', '\1','0','0','1', '\1','0','0','2', '\1','0','0','3', '\1','0','0','4', + '\1','0','0','5', '\1','0','0','6', '\1','0','0','7', '\1','0','0','8', '\1','0','0','9', + '\2','0','1','0', '\2','0','1','1', '\2','0','1','2', '\2','0','1','3', '\2','0','1','4', + '\2','0','1','5', '\2','0','1','6', '\2','0','1','7', '\2','0','1','8', '\2','0','1','9', + '\2','0','2','0', '\2','0','2','1', '\2','0','2','2', '\2','0','2','3', '\2','0','2','4', + '\2','0','2','5', '\2','0','2','6', '\2','0','2','7', '\2','0','2','8', '\2','0','2','9', + '\2','0','3','0', '\2','0','3','1', '\2','0','3','2', '\2','0','3','3', '\2','0','3','4', + '\2','0','3','5', '\2','0','3','6', '\2','0','3','7', '\2','0','3','8', '\2','0','3','9', + '\2','0','4','0', '\2','0','4','1', '\2','0','4','2', '\2','0','4','3', '\2','0','4','4', + '\2','0','4','5', '\2','0','4','6', '\2','0','4','7', '\2','0','4','8', '\2','0','4','9', + '\2','0','5','0', '\2','0','5','1', '\2','0','5','2', '\2','0','5','3', '\2','0','5','4', + '\2','0','5','5', '\2','0','5','6', '\2','0','5','7', '\2','0','5','8', '\2','0','5','9', + '\2','0','6','0', '\2','0','6','1', '\2','0','6','2', '\2','0','6','3', '\2','0','6','4', + '\2','0','6','5', '\2','0','6','6', '\2','0','6','7', '\2','0','6','8', '\2','0','6','9', + '\2','0','7','0', '\2','0','7','1', '\2','0','7','2', '\2','0','7','3', '\2','0','7','4', + '\2','0','7','5', '\2','0','7','6', '\2','0','7','7', '\2','0','7','8', '\2','0','7','9', + '\2','0','8','0', '\2','0','8','1', '\2','0','8','2', '\2','0','8','3', '\2','0','8','4', + '\2','0','8','5', '\2','0','8','6', '\2','0','8','7', '\2','0','8','8', '\2','0','8','9', + '\2','0','9','0', '\2','0','9','1', '\2','0','9','2', '\2','0','9','3', '\2','0','9','4', + '\2','0','9','5', '\2','0','9','6', '\2','0','9','7', '\2','0','9','8', '\2','0','9','9', + '\3','1','0','0', '\3','1','0','1', '\3','1','0','2', '\3','1','0','3', '\3','1','0','4', + '\3','1','0','5', '\3','1','0','6', '\3','1','0','7', '\3','1','0','8', '\3','1','0','9', + '\3','1','1','0', '\3','1','1','1', '\3','1','1','2', '\3','1','1','3', '\3','1','1','4', + '\3','1','1','5', '\3','1','1','6', '\3','1','1','7', '\3','1','1','8', '\3','1','1','9', + '\3','1','2','0', '\3','1','2','1', '\3','1','2','2', '\3','1','2','3', '\3','1','2','4', + '\3','1','2','5', '\3','1','2','6', '\3','1','2','7', '\3','1','2','8', '\3','1','2','9', + '\3','1','3','0', '\3','1','3','1', '\3','1','3','2', '\3','1','3','3', '\3','1','3','4', + '\3','1','3','5', '\3','1','3','6', '\3','1','3','7', '\3','1','3','8', '\3','1','3','9', + '\3','1','4','0', '\3','1','4','1', '\3','1','4','2', '\3','1','4','3', '\3','1','4','4', + '\3','1','4','5', '\3','1','4','6', '\3','1','4','7', '\3','1','4','8', '\3','1','4','9', + '\3','1','5','0', '\3','1','5','1', '\3','1','5','2', '\3','1','5','3', '\3','1','5','4', + '\3','1','5','5', '\3','1','5','6', '\3','1','5','7', '\3','1','5','8', '\3','1','5','9', + '\3','1','6','0', '\3','1','6','1', '\3','1','6','2', '\3','1','6','3', '\3','1','6','4', + '\3','1','6','5', '\3','1','6','6', '\3','1','6','7', '\3','1','6','8', '\3','1','6','9', + '\3','1','7','0', '\3','1','7','1', '\3','1','7','2', '\3','1','7','3', '\3','1','7','4', + '\3','1','7','5', '\3','1','7','6', '\3','1','7','7', '\3','1','7','8', '\3','1','7','9', + '\3','1','8','0', '\3','1','8','1', '\3','1','8','2', '\3','1','8','3', '\3','1','8','4', + '\3','1','8','5', '\3','1','8','6', '\3','1','8','7', '\3','1','8','8', '\3','1','8','9', + '\3','1','9','0', '\3','1','9','1', '\3','1','9','2', '\3','1','9','3', '\3','1','9','4', + '\3','1','9','5', '\3','1','9','6', '\3','1','9','7', '\3','1','9','8', '\3','1','9','9', + '\3','2','0','0', '\3','2','0','1', '\3','2','0','2', '\3','2','0','3', '\3','2','0','4', + '\3','2','0','5', '\3','2','0','6', '\3','2','0','7', '\3','2','0','8', '\3','2','0','9', + '\3','2','1','0', '\3','2','1','1', '\3','2','1','2', '\3','2','1','3', '\3','2','1','4', + '\3','2','1','5', '\3','2','1','6', '\3','2','1','7', '\3','2','1','8', '\3','2','1','9', + '\3','2','2','0', '\3','2','2','1', '\3','2','2','2', '\3','2','2','3', '\3','2','2','4', + '\3','2','2','5', '\3','2','2','6', '\3','2','2','7', '\3','2','2','8', '\3','2','2','9', + '\3','2','3','0', '\3','2','3','1', '\3','2','3','2', '\3','2','3','3', '\3','2','3','4', + '\3','2','3','5', '\3','2','3','6', '\3','2','3','7', '\3','2','3','8', '\3','2','3','9', + '\3','2','4','0', '\3','2','4','1', '\3','2','4','2', '\3','2','4','3', '\3','2','4','4', + '\3','2','4','5', '\3','2','4','6', '\3','2','4','7', '\3','2','4','8', '\3','2','4','9', + '\3','2','5','0', '\3','2','5','1', '\3','2','5','2', '\3','2','5','3', '\3','2','5','4', + '\3','2','5','5', '\3','2','5','6', '\3','2','5','7', '\3','2','5','8', '\3','2','5','9', + '\3','2','6','0', '\3','2','6','1', '\3','2','6','2', '\3','2','6','3', '\3','2','6','4', + '\3','2','6','5', '\3','2','6','6', '\3','2','6','7', '\3','2','6','8', '\3','2','6','9', + '\3','2','7','0', '\3','2','7','1', '\3','2','7','2', '\3','2','7','3', '\3','2','7','4', + '\3','2','7','5', '\3','2','7','6', '\3','2','7','7', '\3','2','7','8', '\3','2','7','9', + '\3','2','8','0', '\3','2','8','1', '\3','2','8','2', '\3','2','8','3', '\3','2','8','4', + '\3','2','8','5', '\3','2','8','6', '\3','2','8','7', '\3','2','8','8', '\3','2','8','9', + '\3','2','9','0', '\3','2','9','1', '\3','2','9','2', '\3','2','9','3', '\3','2','9','4', + '\3','2','9','5', '\3','2','9','6', '\3','2','9','7', '\3','2','9','8', '\3','2','9','9', + '\3','3','0','0', '\3','3','0','1', '\3','3','0','2', '\3','3','0','3', '\3','3','0','4', + '\3','3','0','5', '\3','3','0','6', '\3','3','0','7', '\3','3','0','8', '\3','3','0','9', + '\3','3','1','0', '\3','3','1','1', '\3','3','1','2', '\3','3','1','3', '\3','3','1','4', + '\3','3','1','5', '\3','3','1','6', '\3','3','1','7', '\3','3','1','8', '\3','3','1','9', + '\3','3','2','0', '\3','3','2','1', '\3','3','2','2', '\3','3','2','3', '\3','3','2','4', + '\3','3','2','5', '\3','3','2','6', '\3','3','2','7', '\3','3','2','8', '\3','3','2','9', + '\3','3','3','0', '\3','3','3','1', '\3','3','3','2', '\3','3','3','3', '\3','3','3','4', + '\3','3','3','5', '\3','3','3','6', '\3','3','3','7', '\3','3','3','8', '\3','3','3','9', + '\3','3','4','0', '\3','3','4','1', '\3','3','4','2', '\3','3','4','3', '\3','3','4','4', + '\3','3','4','5', '\3','3','4','6', '\3','3','4','7', '\3','3','4','8', '\3','3','4','9', + '\3','3','5','0', '\3','3','5','1', '\3','3','5','2', '\3','3','5','3', '\3','3','5','4', + '\3','3','5','5', '\3','3','5','6', '\3','3','5','7', '\3','3','5','8', '\3','3','5','9', + '\3','3','6','0', '\3','3','6','1', '\3','3','6','2', '\3','3','6','3', '\3','3','6','4', + '\3','3','6','5', '\3','3','6','6', '\3','3','6','7', '\3','3','6','8', '\3','3','6','9', + '\3','3','7','0', '\3','3','7','1', '\3','3','7','2', '\3','3','7','3', '\3','3','7','4', + '\3','3','7','5', '\3','3','7','6', '\3','3','7','7', '\3','3','7','8', '\3','3','7','9', + '\3','3','8','0', '\3','3','8','1', '\3','3','8','2', '\3','3','8','3', '\3','3','8','4', + '\3','3','8','5', '\3','3','8','6', '\3','3','8','7', '\3','3','8','8', '\3','3','8','9', + '\3','3','9','0', '\3','3','9','1', '\3','3','9','2', '\3','3','9','3', '\3','3','9','4', + '\3','3','9','5', '\3','3','9','6', '\3','3','9','7', '\3','3','9','8', '\3','3','9','9', + '\3','4','0','0', '\3','4','0','1', '\3','4','0','2', '\3','4','0','3', '\3','4','0','4', + '\3','4','0','5', '\3','4','0','6', '\3','4','0','7', '\3','4','0','8', '\3','4','0','9', + '\3','4','1','0', '\3','4','1','1', '\3','4','1','2', '\3','4','1','3', '\3','4','1','4', + '\3','4','1','5', '\3','4','1','6', '\3','4','1','7', '\3','4','1','8', '\3','4','1','9', + '\3','4','2','0', '\3','4','2','1', '\3','4','2','2', '\3','4','2','3', '\3','4','2','4', + '\3','4','2','5', '\3','4','2','6', '\3','4','2','7', '\3','4','2','8', '\3','4','2','9', + '\3','4','3','0', '\3','4','3','1', '\3','4','3','2', '\3','4','3','3', '\3','4','3','4', + '\3','4','3','5', '\3','4','3','6', '\3','4','3','7', '\3','4','3','8', '\3','4','3','9', + '\3','4','4','0', '\3','4','4','1', '\3','4','4','2', '\3','4','4','3', '\3','4','4','4', + '\3','4','4','5', '\3','4','4','6', '\3','4','4','7', '\3','4','4','8', '\3','4','4','9', + '\3','4','5','0', '\3','4','5','1', '\3','4','5','2', '\3','4','5','3', '\3','4','5','4', + '\3','4','5','5', '\3','4','5','6', '\3','4','5','7', '\3','4','5','8', '\3','4','5','9', + '\3','4','6','0', '\3','4','6','1', '\3','4','6','2', '\3','4','6','3', '\3','4','6','4', + '\3','4','6','5', '\3','4','6','6', '\3','4','6','7', '\3','4','6','8', '\3','4','6','9', + '\3','4','7','0', '\3','4','7','1', '\3','4','7','2', '\3','4','7','3', '\3','4','7','4', + '\3','4','7','5', '\3','4','7','6', '\3','4','7','7', '\3','4','7','8', '\3','4','7','9', + '\3','4','8','0', '\3','4','8','1', '\3','4','8','2', '\3','4','8','3', '\3','4','8','4', + '\3','4','8','5', '\3','4','8','6', '\3','4','8','7', '\3','4','8','8', '\3','4','8','9', + '\3','4','9','0', '\3','4','9','1', '\3','4','9','2', '\3','4','9','3', '\3','4','9','4', + '\3','4','9','5', '\3','4','9','6', '\3','4','9','7', '\3','4','9','8', '\3','4','9','9', + '\3','5','0','0', '\3','5','0','1', '\3','5','0','2', '\3','5','0','3', '\3','5','0','4', + '\3','5','0','5', '\3','5','0','6', '\3','5','0','7', '\3','5','0','8', '\3','5','0','9', + '\3','5','1','0', '\3','5','1','1', '\3','5','1','2', '\3','5','1','3', '\3','5','1','4', + '\3','5','1','5', '\3','5','1','6', '\3','5','1','7', '\3','5','1','8', '\3','5','1','9', + '\3','5','2','0', '\3','5','2','1', '\3','5','2','2', '\3','5','2','3', '\3','5','2','4', + '\3','5','2','5', '\3','5','2','6', '\3','5','2','7', '\3','5','2','8', '\3','5','2','9', + '\3','5','3','0', '\3','5','3','1', '\3','5','3','2', '\3','5','3','3', '\3','5','3','4', + '\3','5','3','5', '\3','5','3','6', '\3','5','3','7', '\3','5','3','8', '\3','5','3','9', + '\3','5','4','0', '\3','5','4','1', '\3','5','4','2', '\3','5','4','3', '\3','5','4','4', + '\3','5','4','5', '\3','5','4','6', '\3','5','4','7', '\3','5','4','8', '\3','5','4','9', + '\3','5','5','0', '\3','5','5','1', '\3','5','5','2', '\3','5','5','3', '\3','5','5','4', + '\3','5','5','5', '\3','5','5','6', '\3','5','5','7', '\3','5','5','8', '\3','5','5','9', + '\3','5','6','0', '\3','5','6','1', '\3','5','6','2', '\3','5','6','3', '\3','5','6','4', + '\3','5','6','5', '\3','5','6','6', '\3','5','6','7', '\3','5','6','8', '\3','5','6','9', + '\3','5','7','0', '\3','5','7','1', '\3','5','7','2', '\3','5','7','3', '\3','5','7','4', + '\3','5','7','5', '\3','5','7','6', '\3','5','7','7', '\3','5','7','8', '\3','5','7','9', + '\3','5','8','0', '\3','5','8','1', '\3','5','8','2', '\3','5','8','3', '\3','5','8','4', + '\3','5','8','5', '\3','5','8','6', '\3','5','8','7', '\3','5','8','8', '\3','5','8','9', + '\3','5','9','0', '\3','5','9','1', '\3','5','9','2', '\3','5','9','3', '\3','5','9','4', + '\3','5','9','5', '\3','5','9','6', '\3','5','9','7', '\3','5','9','8', '\3','5','9','9', + '\3','6','0','0', '\3','6','0','1', '\3','6','0','2', '\3','6','0','3', '\3','6','0','4', + '\3','6','0','5', '\3','6','0','6', '\3','6','0','7', '\3','6','0','8', '\3','6','0','9', + '\3','6','1','0', '\3','6','1','1', '\3','6','1','2', '\3','6','1','3', '\3','6','1','4', + '\3','6','1','5', '\3','6','1','6', '\3','6','1','7', '\3','6','1','8', '\3','6','1','9', + '\3','6','2','0', '\3','6','2','1', '\3','6','2','2', '\3','6','2','3', '\3','6','2','4', + '\3','6','2','5', '\3','6','2','6', '\3','6','2','7', '\3','6','2','8', '\3','6','2','9', + '\3','6','3','0', '\3','6','3','1', '\3','6','3','2', '\3','6','3','3', '\3','6','3','4', + '\3','6','3','5', '\3','6','3','6', '\3','6','3','7', '\3','6','3','8', '\3','6','3','9', + '\3','6','4','0', '\3','6','4','1', '\3','6','4','2', '\3','6','4','3', '\3','6','4','4', + '\3','6','4','5', '\3','6','4','6', '\3','6','4','7', '\3','6','4','8', '\3','6','4','9', + '\3','6','5','0', '\3','6','5','1', '\3','6','5','2', '\3','6','5','3', '\3','6','5','4', + '\3','6','5','5', '\3','6','5','6', '\3','6','5','7', '\3','6','5','8', '\3','6','5','9', + '\3','6','6','0', '\3','6','6','1', '\3','6','6','2', '\3','6','6','3', '\3','6','6','4', + '\3','6','6','5', '\3','6','6','6', '\3','6','6','7', '\3','6','6','8', '\3','6','6','9', + '\3','6','7','0', '\3','6','7','1', '\3','6','7','2', '\3','6','7','3', '\3','6','7','4', + '\3','6','7','5', '\3','6','7','6', '\3','6','7','7', '\3','6','7','8', '\3','6','7','9', + '\3','6','8','0', '\3','6','8','1', '\3','6','8','2', '\3','6','8','3', '\3','6','8','4', + '\3','6','8','5', '\3','6','8','6', '\3','6','8','7', '\3','6','8','8', '\3','6','8','9', + '\3','6','9','0', '\3','6','9','1', '\3','6','9','2', '\3','6','9','3', '\3','6','9','4', + '\3','6','9','5', '\3','6','9','6', '\3','6','9','7', '\3','6','9','8', '\3','6','9','9', + '\3','7','0','0', '\3','7','0','1', '\3','7','0','2', '\3','7','0','3', '\3','7','0','4', + '\3','7','0','5', '\3','7','0','6', '\3','7','0','7', '\3','7','0','8', '\3','7','0','9', + '\3','7','1','0', '\3','7','1','1', '\3','7','1','2', '\3','7','1','3', '\3','7','1','4', + '\3','7','1','5', '\3','7','1','6', '\3','7','1','7', '\3','7','1','8', '\3','7','1','9', + '\3','7','2','0', '\3','7','2','1', '\3','7','2','2', '\3','7','2','3', '\3','7','2','4', + '\3','7','2','5', '\3','7','2','6', '\3','7','2','7', '\3','7','2','8', '\3','7','2','9', + '\3','7','3','0', '\3','7','3','1', '\3','7','3','2', '\3','7','3','3', '\3','7','3','4', + '\3','7','3','5', '\3','7','3','6', '\3','7','3','7', '\3','7','3','8', '\3','7','3','9', + '\3','7','4','0', '\3','7','4','1', '\3','7','4','2', '\3','7','4','3', '\3','7','4','4', + '\3','7','4','5', '\3','7','4','6', '\3','7','4','7', '\3','7','4','8', '\3','7','4','9', + '\3','7','5','0', '\3','7','5','1', '\3','7','5','2', '\3','7','5','3', '\3','7','5','4', + '\3','7','5','5', '\3','7','5','6', '\3','7','5','7', '\3','7','5','8', '\3','7','5','9', + '\3','7','6','0', '\3','7','6','1', '\3','7','6','2', '\3','7','6','3', '\3','7','6','4', + '\3','7','6','5', '\3','7','6','6', '\3','7','6','7', '\3','7','6','8', '\3','7','6','9', + '\3','7','7','0', '\3','7','7','1', '\3','7','7','2', '\3','7','7','3', '\3','7','7','4', + '\3','7','7','5', '\3','7','7','6', '\3','7','7','7', '\3','7','7','8', '\3','7','7','9', + '\3','7','8','0', '\3','7','8','1', '\3','7','8','2', '\3','7','8','3', '\3','7','8','4', + '\3','7','8','5', '\3','7','8','6', '\3','7','8','7', '\3','7','8','8', '\3','7','8','9', + '\3','7','9','0', '\3','7','9','1', '\3','7','9','2', '\3','7','9','3', '\3','7','9','4', + '\3','7','9','5', '\3','7','9','6', '\3','7','9','7', '\3','7','9','8', '\3','7','9','9', + '\3','8','0','0', '\3','8','0','1', '\3','8','0','2', '\3','8','0','3', '\3','8','0','4', + '\3','8','0','5', '\3','8','0','6', '\3','8','0','7', '\3','8','0','8', '\3','8','0','9', + '\3','8','1','0', '\3','8','1','1', '\3','8','1','2', '\3','8','1','3', '\3','8','1','4', + '\3','8','1','5', '\3','8','1','6', '\3','8','1','7', '\3','8','1','8', '\3','8','1','9', + '\3','8','2','0', '\3','8','2','1', '\3','8','2','2', '\3','8','2','3', '\3','8','2','4', + '\3','8','2','5', '\3','8','2','6', '\3','8','2','7', '\3','8','2','8', '\3','8','2','9', + '\3','8','3','0', '\3','8','3','1', '\3','8','3','2', '\3','8','3','3', '\3','8','3','4', + '\3','8','3','5', '\3','8','3','6', '\3','8','3','7', '\3','8','3','8', '\3','8','3','9', + '\3','8','4','0', '\3','8','4','1', '\3','8','4','2', '\3','8','4','3', '\3','8','4','4', + '\3','8','4','5', '\3','8','4','6', '\3','8','4','7', '\3','8','4','8', '\3','8','4','9', + '\3','8','5','0', '\3','8','5','1', '\3','8','5','2', '\3','8','5','3', '\3','8','5','4', + '\3','8','5','5', '\3','8','5','6', '\3','8','5','7', '\3','8','5','8', '\3','8','5','9', + '\3','8','6','0', '\3','8','6','1', '\3','8','6','2', '\3','8','6','3', '\3','8','6','4', + '\3','8','6','5', '\3','8','6','6', '\3','8','6','7', '\3','8','6','8', '\3','8','6','9', + '\3','8','7','0', '\3','8','7','1', '\3','8','7','2', '\3','8','7','3', '\3','8','7','4', + '\3','8','7','5', '\3','8','7','6', '\3','8','7','7', '\3','8','7','8', '\3','8','7','9', + '\3','8','8','0', '\3','8','8','1', '\3','8','8','2', '\3','8','8','3', '\3','8','8','4', + '\3','8','8','5', '\3','8','8','6', '\3','8','8','7', '\3','8','8','8', '\3','8','8','9', + '\3','8','9','0', '\3','8','9','1', '\3','8','9','2', '\3','8','9','3', '\3','8','9','4', + '\3','8','9','5', '\3','8','9','6', '\3','8','9','7', '\3','8','9','8', '\3','8','9','9', + '\3','9','0','0', '\3','9','0','1', '\3','9','0','2', '\3','9','0','3', '\3','9','0','4', + '\3','9','0','5', '\3','9','0','6', '\3','9','0','7', '\3','9','0','8', '\3','9','0','9', + '\3','9','1','0', '\3','9','1','1', '\3','9','1','2', '\3','9','1','3', '\3','9','1','4', + '\3','9','1','5', '\3','9','1','6', '\3','9','1','7', '\3','9','1','8', '\3','9','1','9', + '\3','9','2','0', '\3','9','2','1', '\3','9','2','2', '\3','9','2','3', '\3','9','2','4', + '\3','9','2','5', '\3','9','2','6', '\3','9','2','7', '\3','9','2','8', '\3','9','2','9', + '\3','9','3','0', '\3','9','3','1', '\3','9','3','2', '\3','9','3','3', '\3','9','3','4', + '\3','9','3','5', '\3','9','3','6', '\3','9','3','7', '\3','9','3','8', '\3','9','3','9', + '\3','9','4','0', '\3','9','4','1', '\3','9','4','2', '\3','9','4','3', '\3','9','4','4', + '\3','9','4','5', '\3','9','4','6', '\3','9','4','7', '\3','9','4','8', '\3','9','4','9', + '\3','9','5','0', '\3','9','5','1', '\3','9','5','2', '\3','9','5','3', '\3','9','5','4', + '\3','9','5','5', '\3','9','5','6', '\3','9','5','7', '\3','9','5','8', '\3','9','5','9', + '\3','9','6','0', '\3','9','6','1', '\3','9','6','2', '\3','9','6','3', '\3','9','6','4', + '\3','9','6','5', '\3','9','6','6', '\3','9','6','7', '\3','9','6','8', '\3','9','6','9', + '\3','9','7','0', '\3','9','7','1', '\3','9','7','2', '\3','9','7','3', '\3','9','7','4', + '\3','9','7','5', '\3','9','7','6', '\3','9','7','7', '\3','9','7','8', '\3','9','7','9', + '\3','9','8','0', '\3','9','8','1', '\3','9','8','2', '\3','9','8','3', '\3','9','8','4', + '\3','9','8','5', '\3','9','8','6', '\3','9','8','7', '\3','9','8','8', '\3','9','8','9', + '\3','9','9','0', '\3','9','9','1', '\3','9','9','2', '\3','9','9','3', '\3','9','9','4', + '\3','9','9','5', '\3','9','9','6', '\3','9','9','7', '\3','9','9','8', '\3','9','9','9', '\0'}; +#endif + +#if defined(DEC_DPD2BCD8) && DEC_DPD2BCD8==1 && !defined(DECDPD2BCD8) +#define DECDPD2BCD8 + +const uint8_t DPD2BCD8[4096]={ + 0,0,0,0, 0,0,1,1, 0,0,2,1, 0,0,3,1, 0,0,4,1, 0,0,5,1, 0,0,6,1, 0,0,7,1, 0,0,8,1, + 0,0,9,1, 0,8,0,2, 0,8,1,2, 8,0,0,3, 8,0,1,3, 8,8,0,3, 8,8,1,3, 0,1,0,2, 0,1,1,2, + 0,1,2,2, 0,1,3,2, 0,1,4,2, 0,1,5,2, 0,1,6,2, 0,1,7,2, 0,1,8,2, 0,1,9,2, 0,9,0,2, + 0,9,1,2, 8,1,0,3, 8,1,1,3, 8,9,0,3, 8,9,1,3, 0,2,0,2, 0,2,1,2, 0,2,2,2, 0,2,3,2, + 0,2,4,2, 0,2,5,2, 0,2,6,2, 0,2,7,2, 0,2,8,2, 0,2,9,2, 0,8,2,2, 0,8,3,2, 8,2,0,3, + 8,2,1,3, 8,0,8,3, 8,0,9,3, 0,3,0,2, 0,3,1,2, 0,3,2,2, 0,3,3,2, 0,3,4,2, 0,3,5,2, + 0,3,6,2, 0,3,7,2, 0,3,8,2, 0,3,9,2, 0,9,2,2, 0,9,3,2, 8,3,0,3, 8,3,1,3, 8,1,8,3, + 8,1,9,3, 0,4,0,2, 0,4,1,2, 0,4,2,2, 0,4,3,2, 0,4,4,2, 0,4,5,2, 0,4,6,2, 0,4,7,2, + 0,4,8,2, 0,4,9,2, 0,8,4,2, 0,8,5,2, 8,4,0,3, 8,4,1,3, 0,8,8,2, 0,8,9,2, 0,5,0,2, + 0,5,1,2, 0,5,2,2, 0,5,3,2, 0,5,4,2, 0,5,5,2, 0,5,6,2, 0,5,7,2, 0,5,8,2, 0,5,9,2, + 0,9,4,2, 0,9,5,2, 8,5,0,3, 8,5,1,3, 0,9,8,2, 0,9,9,2, 0,6,0,2, 0,6,1,2, 0,6,2,2, + 0,6,3,2, 0,6,4,2, 0,6,5,2, 0,6,6,2, 0,6,7,2, 0,6,8,2, 0,6,9,2, 0,8,6,2, 0,8,7,2, + 8,6,0,3, 8,6,1,3, 8,8,8,3, 8,8,9,3, 0,7,0,2, 0,7,1,2, 0,7,2,2, 0,7,3,2, 0,7,4,2, + 0,7,5,2, 0,7,6,2, 0,7,7,2, 0,7,8,2, 0,7,9,2, 0,9,6,2, 0,9,7,2, 8,7,0,3, 8,7,1,3, + 8,9,8,3, 8,9,9,3, 1,0,0,3, 1,0,1,3, 1,0,2,3, 1,0,3,3, 1,0,4,3, 1,0,5,3, 1,0,6,3, + 1,0,7,3, 1,0,8,3, 1,0,9,3, 1,8,0,3, 1,8,1,3, 9,0,0,3, 9,0,1,3, 9,8,0,3, 9,8,1,3, + 1,1,0,3, 1,1,1,3, 1,1,2,3, 1,1,3,3, 1,1,4,3, 1,1,5,3, 1,1,6,3, 1,1,7,3, 1,1,8,3, + 1,1,9,3, 1,9,0,3, 1,9,1,3, 9,1,0,3, 9,1,1,3, 9,9,0,3, 9,9,1,3, 1,2,0,3, 1,2,1,3, + 1,2,2,3, 1,2,3,3, 1,2,4,3, 1,2,5,3, 1,2,6,3, 1,2,7,3, 1,2,8,3, 1,2,9,3, 1,8,2,3, + 1,8,3,3, 9,2,0,3, 9,2,1,3, 9,0,8,3, 9,0,9,3, 1,3,0,3, 1,3,1,3, 1,3,2,3, 1,3,3,3, + 1,3,4,3, 1,3,5,3, 1,3,6,3, 1,3,7,3, 1,3,8,3, 1,3,9,3, 1,9,2,3, 1,9,3,3, 9,3,0,3, + 9,3,1,3, 9,1,8,3, 9,1,9,3, 1,4,0,3, 1,4,1,3, 1,4,2,3, 1,4,3,3, 1,4,4,3, 1,4,5,3, + 1,4,6,3, 1,4,7,3, 1,4,8,3, 1,4,9,3, 1,8,4,3, 1,8,5,3, 9,4,0,3, 9,4,1,3, 1,8,8,3, + 1,8,9,3, 1,5,0,3, 1,5,1,3, 1,5,2,3, 1,5,3,3, 1,5,4,3, 1,5,5,3, 1,5,6,3, 1,5,7,3, + 1,5,8,3, 1,5,9,3, 1,9,4,3, 1,9,5,3, 9,5,0,3, 9,5,1,3, 1,9,8,3, 1,9,9,3, 1,6,0,3, + 1,6,1,3, 1,6,2,3, 1,6,3,3, 1,6,4,3, 1,6,5,3, 1,6,6,3, 1,6,7,3, 1,6,8,3, 1,6,9,3, + 1,8,6,3, 1,8,7,3, 9,6,0,3, 9,6,1,3, 9,8,8,3, 9,8,9,3, 1,7,0,3, 1,7,1,3, 1,7,2,3, + 1,7,3,3, 1,7,4,3, 1,7,5,3, 1,7,6,3, 1,7,7,3, 1,7,8,3, 1,7,9,3, 1,9,6,3, 1,9,7,3, + 9,7,0,3, 9,7,1,3, 9,9,8,3, 9,9,9,3, 2,0,0,3, 2,0,1,3, 2,0,2,3, 2,0,3,3, 2,0,4,3, + 2,0,5,3, 2,0,6,3, 2,0,7,3, 2,0,8,3, 2,0,9,3, 2,8,0,3, 2,8,1,3, 8,0,2,3, 8,0,3,3, + 8,8,2,3, 8,8,3,3, 2,1,0,3, 2,1,1,3, 2,1,2,3, 2,1,3,3, 2,1,4,3, 2,1,5,3, 2,1,6,3, + 2,1,7,3, 2,1,8,3, 2,1,9,3, 2,9,0,3, 2,9,1,3, 8,1,2,3, 8,1,3,3, 8,9,2,3, 8,9,3,3, + 2,2,0,3, 2,2,1,3, 2,2,2,3, 2,2,3,3, 2,2,4,3, 2,2,5,3, 2,2,6,3, 2,2,7,3, 2,2,8,3, + 2,2,9,3, 2,8,2,3, 2,8,3,3, 8,2,2,3, 8,2,3,3, 8,2,8,3, 8,2,9,3, 2,3,0,3, 2,3,1,3, + 2,3,2,3, 2,3,3,3, 2,3,4,3, 2,3,5,3, 2,3,6,3, 2,3,7,3, 2,3,8,3, 2,3,9,3, 2,9,2,3, + 2,9,3,3, 8,3,2,3, 8,3,3,3, 8,3,8,3, 8,3,9,3, 2,4,0,3, 2,4,1,3, 2,4,2,3, 2,4,3,3, + 2,4,4,3, 2,4,5,3, 2,4,6,3, 2,4,7,3, 2,4,8,3, 2,4,9,3, 2,8,4,3, 2,8,5,3, 8,4,2,3, + 8,4,3,3, 2,8,8,3, 2,8,9,3, 2,5,0,3, 2,5,1,3, 2,5,2,3, 2,5,3,3, 2,5,4,3, 2,5,5,3, + 2,5,6,3, 2,5,7,3, 2,5,8,3, 2,5,9,3, 2,9,4,3, 2,9,5,3, 8,5,2,3, 8,5,3,3, 2,9,8,3, + 2,9,9,3, 2,6,0,3, 2,6,1,3, 2,6,2,3, 2,6,3,3, 2,6,4,3, 2,6,5,3, 2,6,6,3, 2,6,7,3, + 2,6,8,3, 2,6,9,3, 2,8,6,3, 2,8,7,3, 8,6,2,3, 8,6,3,3, 8,8,8,3, 8,8,9,3, 2,7,0,3, + 2,7,1,3, 2,7,2,3, 2,7,3,3, 2,7,4,3, 2,7,5,3, 2,7,6,3, 2,7,7,3, 2,7,8,3, 2,7,9,3, + 2,9,6,3, 2,9,7,3, 8,7,2,3, 8,7,3,3, 8,9,8,3, 8,9,9,3, 3,0,0,3, 3,0,1,3, 3,0,2,3, + 3,0,3,3, 3,0,4,3, 3,0,5,3, 3,0,6,3, 3,0,7,3, 3,0,8,3, 3,0,9,3, 3,8,0,3, 3,8,1,3, + 9,0,2,3, 9,0,3,3, 9,8,2,3, 9,8,3,3, 3,1,0,3, 3,1,1,3, 3,1,2,3, 3,1,3,3, 3,1,4,3, + 3,1,5,3, 3,1,6,3, 3,1,7,3, 3,1,8,3, 3,1,9,3, 3,9,0,3, 3,9,1,3, 9,1,2,3, 9,1,3,3, + 9,9,2,3, 9,9,3,3, 3,2,0,3, 3,2,1,3, 3,2,2,3, 3,2,3,3, 3,2,4,3, 3,2,5,3, 3,2,6,3, + 3,2,7,3, 3,2,8,3, 3,2,9,3, 3,8,2,3, 3,8,3,3, 9,2,2,3, 9,2,3,3, 9,2,8,3, 9,2,9,3, + 3,3,0,3, 3,3,1,3, 3,3,2,3, 3,3,3,3, 3,3,4,3, 3,3,5,3, 3,3,6,3, 3,3,7,3, 3,3,8,3, + 3,3,9,3, 3,9,2,3, 3,9,3,3, 9,3,2,3, 9,3,3,3, 9,3,8,3, 9,3,9,3, 3,4,0,3, 3,4,1,3, + 3,4,2,3, 3,4,3,3, 3,4,4,3, 3,4,5,3, 3,4,6,3, 3,4,7,3, 3,4,8,3, 3,4,9,3, 3,8,4,3, + 3,8,5,3, 9,4,2,3, 9,4,3,3, 3,8,8,3, 3,8,9,3, 3,5,0,3, 3,5,1,3, 3,5,2,3, 3,5,3,3, + 3,5,4,3, 3,5,5,3, 3,5,6,3, 3,5,7,3, 3,5,8,3, 3,5,9,3, 3,9,4,3, 3,9,5,3, 9,5,2,3, + 9,5,3,3, 3,9,8,3, 3,9,9,3, 3,6,0,3, 3,6,1,3, 3,6,2,3, 3,6,3,3, 3,6,4,3, 3,6,5,3, + 3,6,6,3, 3,6,7,3, 3,6,8,3, 3,6,9,3, 3,8,6,3, 3,8,7,3, 9,6,2,3, 9,6,3,3, 9,8,8,3, + 9,8,9,3, 3,7,0,3, 3,7,1,3, 3,7,2,3, 3,7,3,3, 3,7,4,3, 3,7,5,3, 3,7,6,3, 3,7,7,3, + 3,7,8,3, 3,7,9,3, 3,9,6,3, 3,9,7,3, 9,7,2,3, 9,7,3,3, 9,9,8,3, 9,9,9,3, 4,0,0,3, + 4,0,1,3, 4,0,2,3, 4,0,3,3, 4,0,4,3, 4,0,5,3, 4,0,6,3, 4,0,7,3, 4,0,8,3, 4,0,9,3, + 4,8,0,3, 4,8,1,3, 8,0,4,3, 8,0,5,3, 8,8,4,3, 8,8,5,3, 4,1,0,3, 4,1,1,3, 4,1,2,3, + 4,1,3,3, 4,1,4,3, 4,1,5,3, 4,1,6,3, 4,1,7,3, 4,1,8,3, 4,1,9,3, 4,9,0,3, 4,9,1,3, + 8,1,4,3, 8,1,5,3, 8,9,4,3, 8,9,5,3, 4,2,0,3, 4,2,1,3, 4,2,2,3, 4,2,3,3, 4,2,4,3, + 4,2,5,3, 4,2,6,3, 4,2,7,3, 4,2,8,3, 4,2,9,3, 4,8,2,3, 4,8,3,3, 8,2,4,3, 8,2,5,3, + 8,4,8,3, 8,4,9,3, 4,3,0,3, 4,3,1,3, 4,3,2,3, 4,3,3,3, 4,3,4,3, 4,3,5,3, 4,3,6,3, + 4,3,7,3, 4,3,8,3, 4,3,9,3, 4,9,2,3, 4,9,3,3, 8,3,4,3, 8,3,5,3, 8,5,8,3, 8,5,9,3, + 4,4,0,3, 4,4,1,3, 4,4,2,3, 4,4,3,3, 4,4,4,3, 4,4,5,3, 4,4,6,3, 4,4,7,3, 4,4,8,3, + 4,4,9,3, 4,8,4,3, 4,8,5,3, 8,4,4,3, 8,4,5,3, 4,8,8,3, 4,8,9,3, 4,5,0,3, 4,5,1,3, + 4,5,2,3, 4,5,3,3, 4,5,4,3, 4,5,5,3, 4,5,6,3, 4,5,7,3, 4,5,8,3, 4,5,9,3, 4,9,4,3, + 4,9,5,3, 8,5,4,3, 8,5,5,3, 4,9,8,3, 4,9,9,3, 4,6,0,3, 4,6,1,3, 4,6,2,3, 4,6,3,3, + 4,6,4,3, 4,6,5,3, 4,6,6,3, 4,6,7,3, 4,6,8,3, 4,6,9,3, 4,8,6,3, 4,8,7,3, 8,6,4,3, + 8,6,5,3, 8,8,8,3, 8,8,9,3, 4,7,0,3, 4,7,1,3, 4,7,2,3, 4,7,3,3, 4,7,4,3, 4,7,5,3, + 4,7,6,3, 4,7,7,3, 4,7,8,3, 4,7,9,3, 4,9,6,3, 4,9,7,3, 8,7,4,3, 8,7,5,3, 8,9,8,3, + 8,9,9,3, 5,0,0,3, 5,0,1,3, 5,0,2,3, 5,0,3,3, 5,0,4,3, 5,0,5,3, 5,0,6,3, 5,0,7,3, + 5,0,8,3, 5,0,9,3, 5,8,0,3, 5,8,1,3, 9,0,4,3, 9,0,5,3, 9,8,4,3, 9,8,5,3, 5,1,0,3, + 5,1,1,3, 5,1,2,3, 5,1,3,3, 5,1,4,3, 5,1,5,3, 5,1,6,3, 5,1,7,3, 5,1,8,3, 5,1,9,3, + 5,9,0,3, 5,9,1,3, 9,1,4,3, 9,1,5,3, 9,9,4,3, 9,9,5,3, 5,2,0,3, 5,2,1,3, 5,2,2,3, + 5,2,3,3, 5,2,4,3, 5,2,5,3, 5,2,6,3, 5,2,7,3, 5,2,8,3, 5,2,9,3, 5,8,2,3, 5,8,3,3, + 9,2,4,3, 9,2,5,3, 9,4,8,3, 9,4,9,3, 5,3,0,3, 5,3,1,3, 5,3,2,3, 5,3,3,3, 5,3,4,3, + 5,3,5,3, 5,3,6,3, 5,3,7,3, 5,3,8,3, 5,3,9,3, 5,9,2,3, 5,9,3,3, 9,3,4,3, 9,3,5,3, + 9,5,8,3, 9,5,9,3, 5,4,0,3, 5,4,1,3, 5,4,2,3, 5,4,3,3, 5,4,4,3, 5,4,5,3, 5,4,6,3, + 5,4,7,3, 5,4,8,3, 5,4,9,3, 5,8,4,3, 5,8,5,3, 9,4,4,3, 9,4,5,3, 5,8,8,3, 5,8,9,3, + 5,5,0,3, 5,5,1,3, 5,5,2,3, 5,5,3,3, 5,5,4,3, 5,5,5,3, 5,5,6,3, 5,5,7,3, 5,5,8,3, + 5,5,9,3, 5,9,4,3, 5,9,5,3, 9,5,4,3, 9,5,5,3, 5,9,8,3, 5,9,9,3, 5,6,0,3, 5,6,1,3, + 5,6,2,3, 5,6,3,3, 5,6,4,3, 5,6,5,3, 5,6,6,3, 5,6,7,3, 5,6,8,3, 5,6,9,3, 5,8,6,3, + 5,8,7,3, 9,6,4,3, 9,6,5,3, 9,8,8,3, 9,8,9,3, 5,7,0,3, 5,7,1,3, 5,7,2,3, 5,7,3,3, + 5,7,4,3, 5,7,5,3, 5,7,6,3, 5,7,7,3, 5,7,8,3, 5,7,9,3, 5,9,6,3, 5,9,7,3, 9,7,4,3, + 9,7,5,3, 9,9,8,3, 9,9,9,3, 6,0,0,3, 6,0,1,3, 6,0,2,3, 6,0,3,3, 6,0,4,3, 6,0,5,3, + 6,0,6,3, 6,0,7,3, 6,0,8,3, 6,0,9,3, 6,8,0,3, 6,8,1,3, 8,0,6,3, 8,0,7,3, 8,8,6,3, + 8,8,7,3, 6,1,0,3, 6,1,1,3, 6,1,2,3, 6,1,3,3, 6,1,4,3, 6,1,5,3, 6,1,6,3, 6,1,7,3, + 6,1,8,3, 6,1,9,3, 6,9,0,3, 6,9,1,3, 8,1,6,3, 8,1,7,3, 8,9,6,3, 8,9,7,3, 6,2,0,3, + 6,2,1,3, 6,2,2,3, 6,2,3,3, 6,2,4,3, 6,2,5,3, 6,2,6,3, 6,2,7,3, 6,2,8,3, 6,2,9,3, + 6,8,2,3, 6,8,3,3, 8,2,6,3, 8,2,7,3, 8,6,8,3, 8,6,9,3, 6,3,0,3, 6,3,1,3, 6,3,2,3, + 6,3,3,3, 6,3,4,3, 6,3,5,3, 6,3,6,3, 6,3,7,3, 6,3,8,3, 6,3,9,3, 6,9,2,3, 6,9,3,3, + 8,3,6,3, 8,3,7,3, 8,7,8,3, 8,7,9,3, 6,4,0,3, 6,4,1,3, 6,4,2,3, 6,4,3,3, 6,4,4,3, + 6,4,5,3, 6,4,6,3, 6,4,7,3, 6,4,8,3, 6,4,9,3, 6,8,4,3, 6,8,5,3, 8,4,6,3, 8,4,7,3, + 6,8,8,3, 6,8,9,3, 6,5,0,3, 6,5,1,3, 6,5,2,3, 6,5,3,3, 6,5,4,3, 6,5,5,3, 6,5,6,3, + 6,5,7,3, 6,5,8,3, 6,5,9,3, 6,9,4,3, 6,9,5,3, 8,5,6,3, 8,5,7,3, 6,9,8,3, 6,9,9,3, + 6,6,0,3, 6,6,1,3, 6,6,2,3, 6,6,3,3, 6,6,4,3, 6,6,5,3, 6,6,6,3, 6,6,7,3, 6,6,8,3, + 6,6,9,3, 6,8,6,3, 6,8,7,3, 8,6,6,3, 8,6,7,3, 8,8,8,3, 8,8,9,3, 6,7,0,3, 6,7,1,3, + 6,7,2,3, 6,7,3,3, 6,7,4,3, 6,7,5,3, 6,7,6,3, 6,7,7,3, 6,7,8,3, 6,7,9,3, 6,9,6,3, + 6,9,7,3, 8,7,6,3, 8,7,7,3, 8,9,8,3, 8,9,9,3, 7,0,0,3, 7,0,1,3, 7,0,2,3, 7,0,3,3, + 7,0,4,3, 7,0,5,3, 7,0,6,3, 7,0,7,3, 7,0,8,3, 7,0,9,3, 7,8,0,3, 7,8,1,3, 9,0,6,3, + 9,0,7,3, 9,8,6,3, 9,8,7,3, 7,1,0,3, 7,1,1,3, 7,1,2,3, 7,1,3,3, 7,1,4,3, 7,1,5,3, + 7,1,6,3, 7,1,7,3, 7,1,8,3, 7,1,9,3, 7,9,0,3, 7,9,1,3, 9,1,6,3, 9,1,7,3, 9,9,6,3, + 9,9,7,3, 7,2,0,3, 7,2,1,3, 7,2,2,3, 7,2,3,3, 7,2,4,3, 7,2,5,3, 7,2,6,3, 7,2,7,3, + 7,2,8,3, 7,2,9,3, 7,8,2,3, 7,8,3,3, 9,2,6,3, 9,2,7,3, 9,6,8,3, 9,6,9,3, 7,3,0,3, + 7,3,1,3, 7,3,2,3, 7,3,3,3, 7,3,4,3, 7,3,5,3, 7,3,6,3, 7,3,7,3, 7,3,8,3, 7,3,9,3, + 7,9,2,3, 7,9,3,3, 9,3,6,3, 9,3,7,3, 9,7,8,3, 9,7,9,3, 7,4,0,3, 7,4,1,3, 7,4,2,3, + 7,4,3,3, 7,4,4,3, 7,4,5,3, 7,4,6,3, 7,4,7,3, 7,4,8,3, 7,4,9,3, 7,8,4,3, 7,8,5,3, + 9,4,6,3, 9,4,7,3, 7,8,8,3, 7,8,9,3, 7,5,0,3, 7,5,1,3, 7,5,2,3, 7,5,3,3, 7,5,4,3, + 7,5,5,3, 7,5,6,3, 7,5,7,3, 7,5,8,3, 7,5,9,3, 7,9,4,3, 7,9,5,3, 9,5,6,3, 9,5,7,3, + 7,9,8,3, 7,9,9,3, 7,6,0,3, 7,6,1,3, 7,6,2,3, 7,6,3,3, 7,6,4,3, 7,6,5,3, 7,6,6,3, + 7,6,7,3, 7,6,8,3, 7,6,9,3, 7,8,6,3, 7,8,7,3, 9,6,6,3, 9,6,7,3, 9,8,8,3, 9,8,9,3, + 7,7,0,3, 7,7,1,3, 7,7,2,3, 7,7,3,3, 7,7,4,3, 7,7,5,3, 7,7,6,3, 7,7,7,3, 7,7,8,3, + 7,7,9,3, 7,9,6,3, 7,9,7,3, 9,7,6,3, 9,7,7,3, 9,9,8,3, 9,9,9,3}; +#endif + +#if defined(DEC_BIN2BCD8) && DEC_BIN2BCD8==1 && !defined(DECBIN2BCD8) +#define DECBIN2BCD8 + +const uint8_t BIN2BCD8[4000]={ + 0,0,0,0, 0,0,1,1, 0,0,2,1, 0,0,3,1, 0,0,4,1, 0,0,5,1, 0,0,6,1, 0,0,7,1, 0,0,8,1, + 0,0,9,1, 0,1,0,2, 0,1,1,2, 0,1,2,2, 0,1,3,2, 0,1,4,2, 0,1,5,2, 0,1,6,2, 0,1,7,2, + 0,1,8,2, 0,1,9,2, 0,2,0,2, 0,2,1,2, 0,2,2,2, 0,2,3,2, 0,2,4,2, 0,2,5,2, 0,2,6,2, + 0,2,7,2, 0,2,8,2, 0,2,9,2, 0,3,0,2, 0,3,1,2, 0,3,2,2, 0,3,3,2, 0,3,4,2, 0,3,5,2, + 0,3,6,2, 0,3,7,2, 0,3,8,2, 0,3,9,2, 0,4,0,2, 0,4,1,2, 0,4,2,2, 0,4,3,2, 0,4,4,2, + 0,4,5,2, 0,4,6,2, 0,4,7,2, 0,4,8,2, 0,4,9,2, 0,5,0,2, 0,5,1,2, 0,5,2,2, 0,5,3,2, + 0,5,4,2, 0,5,5,2, 0,5,6,2, 0,5,7,2, 0,5,8,2, 0,5,9,2, 0,6,0,2, 0,6,1,2, 0,6,2,2, + 0,6,3,2, 0,6,4,2, 0,6,5,2, 0,6,6,2, 0,6,7,2, 0,6,8,2, 0,6,9,2, 0,7,0,2, 0,7,1,2, + 0,7,2,2, 0,7,3,2, 0,7,4,2, 0,7,5,2, 0,7,6,2, 0,7,7,2, 0,7,8,2, 0,7,9,2, 0,8,0,2, + 0,8,1,2, 0,8,2,2, 0,8,3,2, 0,8,4,2, 0,8,5,2, 0,8,6,2, 0,8,7,2, 0,8,8,2, 0,8,9,2, + 0,9,0,2, 0,9,1,2, 0,9,2,2, 0,9,3,2, 0,9,4,2, 0,9,5,2, 0,9,6,2, 0,9,7,2, 0,9,8,2, + 0,9,9,2, 1,0,0,3, 1,0,1,3, 1,0,2,3, 1,0,3,3, 1,0,4,3, 1,0,5,3, 1,0,6,3, 1,0,7,3, + 1,0,8,3, 1,0,9,3, 1,1,0,3, 1,1,1,3, 1,1,2,3, 1,1,3,3, 1,1,4,3, 1,1,5,3, 1,1,6,3, + 1,1,7,3, 1,1,8,3, 1,1,9,3, 1,2,0,3, 1,2,1,3, 1,2,2,3, 1,2,3,3, 1,2,4,3, 1,2,5,3, + 1,2,6,3, 1,2,7,3, 1,2,8,3, 1,2,9,3, 1,3,0,3, 1,3,1,3, 1,3,2,3, 1,3,3,3, 1,3,4,3, + 1,3,5,3, 1,3,6,3, 1,3,7,3, 1,3,8,3, 1,3,9,3, 1,4,0,3, 1,4,1,3, 1,4,2,3, 1,4,3,3, + 1,4,4,3, 1,4,5,3, 1,4,6,3, 1,4,7,3, 1,4,8,3, 1,4,9,3, 1,5,0,3, 1,5,1,3, 1,5,2,3, + 1,5,3,3, 1,5,4,3, 1,5,5,3, 1,5,6,3, 1,5,7,3, 1,5,8,3, 1,5,9,3, 1,6,0,3, 1,6,1,3, + 1,6,2,3, 1,6,3,3, 1,6,4,3, 1,6,5,3, 1,6,6,3, 1,6,7,3, 1,6,8,3, 1,6,9,3, 1,7,0,3, + 1,7,1,3, 1,7,2,3, 1,7,3,3, 1,7,4,3, 1,7,5,3, 1,7,6,3, 1,7,7,3, 1,7,8,3, 1,7,9,3, + 1,8,0,3, 1,8,1,3, 1,8,2,3, 1,8,3,3, 1,8,4,3, 1,8,5,3, 1,8,6,3, 1,8,7,3, 1,8,8,3, + 1,8,9,3, 1,9,0,3, 1,9,1,3, 1,9,2,3, 1,9,3,3, 1,9,4,3, 1,9,5,3, 1,9,6,3, 1,9,7,3, + 1,9,8,3, 1,9,9,3, 2,0,0,3, 2,0,1,3, 2,0,2,3, 2,0,3,3, 2,0,4,3, 2,0,5,3, 2,0,6,3, + 2,0,7,3, 2,0,8,3, 2,0,9,3, 2,1,0,3, 2,1,1,3, 2,1,2,3, 2,1,3,3, 2,1,4,3, 2,1,5,3, + 2,1,6,3, 2,1,7,3, 2,1,8,3, 2,1,9,3, 2,2,0,3, 2,2,1,3, 2,2,2,3, 2,2,3,3, 2,2,4,3, + 2,2,5,3, 2,2,6,3, 2,2,7,3, 2,2,8,3, 2,2,9,3, 2,3,0,3, 2,3,1,3, 2,3,2,3, 2,3,3,3, + 2,3,4,3, 2,3,5,3, 2,3,6,3, 2,3,7,3, 2,3,8,3, 2,3,9,3, 2,4,0,3, 2,4,1,3, 2,4,2,3, + 2,4,3,3, 2,4,4,3, 2,4,5,3, 2,4,6,3, 2,4,7,3, 2,4,8,3, 2,4,9,3, 2,5,0,3, 2,5,1,3, + 2,5,2,3, 2,5,3,3, 2,5,4,3, 2,5,5,3, 2,5,6,3, 2,5,7,3, 2,5,8,3, 2,5,9,3, 2,6,0,3, + 2,6,1,3, 2,6,2,3, 2,6,3,3, 2,6,4,3, 2,6,5,3, 2,6,6,3, 2,6,7,3, 2,6,8,3, 2,6,9,3, + 2,7,0,3, 2,7,1,3, 2,7,2,3, 2,7,3,3, 2,7,4,3, 2,7,5,3, 2,7,6,3, 2,7,7,3, 2,7,8,3, + 2,7,9,3, 2,8,0,3, 2,8,1,3, 2,8,2,3, 2,8,3,3, 2,8,4,3, 2,8,5,3, 2,8,6,3, 2,8,7,3, + 2,8,8,3, 2,8,9,3, 2,9,0,3, 2,9,1,3, 2,9,2,3, 2,9,3,3, 2,9,4,3, 2,9,5,3, 2,9,6,3, + 2,9,7,3, 2,9,8,3, 2,9,9,3, 3,0,0,3, 3,0,1,3, 3,0,2,3, 3,0,3,3, 3,0,4,3, 3,0,5,3, + 3,0,6,3, 3,0,7,3, 3,0,8,3, 3,0,9,3, 3,1,0,3, 3,1,1,3, 3,1,2,3, 3,1,3,3, 3,1,4,3, + 3,1,5,3, 3,1,6,3, 3,1,7,3, 3,1,8,3, 3,1,9,3, 3,2,0,3, 3,2,1,3, 3,2,2,3, 3,2,3,3, + 3,2,4,3, 3,2,5,3, 3,2,6,3, 3,2,7,3, 3,2,8,3, 3,2,9,3, 3,3,0,3, 3,3,1,3, 3,3,2,3, + 3,3,3,3, 3,3,4,3, 3,3,5,3, 3,3,6,3, 3,3,7,3, 3,3,8,3, 3,3,9,3, 3,4,0,3, 3,4,1,3, + 3,4,2,3, 3,4,3,3, 3,4,4,3, 3,4,5,3, 3,4,6,3, 3,4,7,3, 3,4,8,3, 3,4,9,3, 3,5,0,3, + 3,5,1,3, 3,5,2,3, 3,5,3,3, 3,5,4,3, 3,5,5,3, 3,5,6,3, 3,5,7,3, 3,5,8,3, 3,5,9,3, + 3,6,0,3, 3,6,1,3, 3,6,2,3, 3,6,3,3, 3,6,4,3, 3,6,5,3, 3,6,6,3, 3,6,7,3, 3,6,8,3, + 3,6,9,3, 3,7,0,3, 3,7,1,3, 3,7,2,3, 3,7,3,3, 3,7,4,3, 3,7,5,3, 3,7,6,3, 3,7,7,3, + 3,7,8,3, 3,7,9,3, 3,8,0,3, 3,8,1,3, 3,8,2,3, 3,8,3,3, 3,8,4,3, 3,8,5,3, 3,8,6,3, + 3,8,7,3, 3,8,8,3, 3,8,9,3, 3,9,0,3, 3,9,1,3, 3,9,2,3, 3,9,3,3, 3,9,4,3, 3,9,5,3, + 3,9,6,3, 3,9,7,3, 3,9,8,3, 3,9,9,3, 4,0,0,3, 4,0,1,3, 4,0,2,3, 4,0,3,3, 4,0,4,3, + 4,0,5,3, 4,0,6,3, 4,0,7,3, 4,0,8,3, 4,0,9,3, 4,1,0,3, 4,1,1,3, 4,1,2,3, 4,1,3,3, + 4,1,4,3, 4,1,5,3, 4,1,6,3, 4,1,7,3, 4,1,8,3, 4,1,9,3, 4,2,0,3, 4,2,1,3, 4,2,2,3, + 4,2,3,3, 4,2,4,3, 4,2,5,3, 4,2,6,3, 4,2,7,3, 4,2,8,3, 4,2,9,3, 4,3,0,3, 4,3,1,3, + 4,3,2,3, 4,3,3,3, 4,3,4,3, 4,3,5,3, 4,3,6,3, 4,3,7,3, 4,3,8,3, 4,3,9,3, 4,4,0,3, + 4,4,1,3, 4,4,2,3, 4,4,3,3, 4,4,4,3, 4,4,5,3, 4,4,6,3, 4,4,7,3, 4,4,8,3, 4,4,9,3, + 4,5,0,3, 4,5,1,3, 4,5,2,3, 4,5,3,3, 4,5,4,3, 4,5,5,3, 4,5,6,3, 4,5,7,3, 4,5,8,3, + 4,5,9,3, 4,6,0,3, 4,6,1,3, 4,6,2,3, 4,6,3,3, 4,6,4,3, 4,6,5,3, 4,6,6,3, 4,6,7,3, + 4,6,8,3, 4,6,9,3, 4,7,0,3, 4,7,1,3, 4,7,2,3, 4,7,3,3, 4,7,4,3, 4,7,5,3, 4,7,6,3, + 4,7,7,3, 4,7,8,3, 4,7,9,3, 4,8,0,3, 4,8,1,3, 4,8,2,3, 4,8,3,3, 4,8,4,3, 4,8,5,3, + 4,8,6,3, 4,8,7,3, 4,8,8,3, 4,8,9,3, 4,9,0,3, 4,9,1,3, 4,9,2,3, 4,9,3,3, 4,9,4,3, + 4,9,5,3, 4,9,6,3, 4,9,7,3, 4,9,8,3, 4,9,9,3, 5,0,0,3, 5,0,1,3, 5,0,2,3, 5,0,3,3, + 5,0,4,3, 5,0,5,3, 5,0,6,3, 5,0,7,3, 5,0,8,3, 5,0,9,3, 5,1,0,3, 5,1,1,3, 5,1,2,3, + 5,1,3,3, 5,1,4,3, 5,1,5,3, 5,1,6,3, 5,1,7,3, 5,1,8,3, 5,1,9,3, 5,2,0,3, 5,2,1,3, + 5,2,2,3, 5,2,3,3, 5,2,4,3, 5,2,5,3, 5,2,6,3, 5,2,7,3, 5,2,8,3, 5,2,9,3, 5,3,0,3, + 5,3,1,3, 5,3,2,3, 5,3,3,3, 5,3,4,3, 5,3,5,3, 5,3,6,3, 5,3,7,3, 5,3,8,3, 5,3,9,3, + 5,4,0,3, 5,4,1,3, 5,4,2,3, 5,4,3,3, 5,4,4,3, 5,4,5,3, 5,4,6,3, 5,4,7,3, 5,4,8,3, + 5,4,9,3, 5,5,0,3, 5,5,1,3, 5,5,2,3, 5,5,3,3, 5,5,4,3, 5,5,5,3, 5,5,6,3, 5,5,7,3, + 5,5,8,3, 5,5,9,3, 5,6,0,3, 5,6,1,3, 5,6,2,3, 5,6,3,3, 5,6,4,3, 5,6,5,3, 5,6,6,3, + 5,6,7,3, 5,6,8,3, 5,6,9,3, 5,7,0,3, 5,7,1,3, 5,7,2,3, 5,7,3,3, 5,7,4,3, 5,7,5,3, + 5,7,6,3, 5,7,7,3, 5,7,8,3, 5,7,9,3, 5,8,0,3, 5,8,1,3, 5,8,2,3, 5,8,3,3, 5,8,4,3, + 5,8,5,3, 5,8,6,3, 5,8,7,3, 5,8,8,3, 5,8,9,3, 5,9,0,3, 5,9,1,3, 5,9,2,3, 5,9,3,3, + 5,9,4,3, 5,9,5,3, 5,9,6,3, 5,9,7,3, 5,9,8,3, 5,9,9,3, 6,0,0,3, 6,0,1,3, 6,0,2,3, + 6,0,3,3, 6,0,4,3, 6,0,5,3, 6,0,6,3, 6,0,7,3, 6,0,8,3, 6,0,9,3, 6,1,0,3, 6,1,1,3, + 6,1,2,3, 6,1,3,3, 6,1,4,3, 6,1,5,3, 6,1,6,3, 6,1,7,3, 6,1,8,3, 6,1,9,3, 6,2,0,3, + 6,2,1,3, 6,2,2,3, 6,2,3,3, 6,2,4,3, 6,2,5,3, 6,2,6,3, 6,2,7,3, 6,2,8,3, 6,2,9,3, + 6,3,0,3, 6,3,1,3, 6,3,2,3, 6,3,3,3, 6,3,4,3, 6,3,5,3, 6,3,6,3, 6,3,7,3, 6,3,8,3, + 6,3,9,3, 6,4,0,3, 6,4,1,3, 6,4,2,3, 6,4,3,3, 6,4,4,3, 6,4,5,3, 6,4,6,3, 6,4,7,3, + 6,4,8,3, 6,4,9,3, 6,5,0,3, 6,5,1,3, 6,5,2,3, 6,5,3,3, 6,5,4,3, 6,5,5,3, 6,5,6,3, + 6,5,7,3, 6,5,8,3, 6,5,9,3, 6,6,0,3, 6,6,1,3, 6,6,2,3, 6,6,3,3, 6,6,4,3, 6,6,5,3, + 6,6,6,3, 6,6,7,3, 6,6,8,3, 6,6,9,3, 6,7,0,3, 6,7,1,3, 6,7,2,3, 6,7,3,3, 6,7,4,3, + 6,7,5,3, 6,7,6,3, 6,7,7,3, 6,7,8,3, 6,7,9,3, 6,8,0,3, 6,8,1,3, 6,8,2,3, 6,8,3,3, + 6,8,4,3, 6,8,5,3, 6,8,6,3, 6,8,7,3, 6,8,8,3, 6,8,9,3, 6,9,0,3, 6,9,1,3, 6,9,2,3, + 6,9,3,3, 6,9,4,3, 6,9,5,3, 6,9,6,3, 6,9,7,3, 6,9,8,3, 6,9,9,3, 7,0,0,3, 7,0,1,3, + 7,0,2,3, 7,0,3,3, 7,0,4,3, 7,0,5,3, 7,0,6,3, 7,0,7,3, 7,0,8,3, 7,0,9,3, 7,1,0,3, + 7,1,1,3, 7,1,2,3, 7,1,3,3, 7,1,4,3, 7,1,5,3, 7,1,6,3, 7,1,7,3, 7,1,8,3, 7,1,9,3, + 7,2,0,3, 7,2,1,3, 7,2,2,3, 7,2,3,3, 7,2,4,3, 7,2,5,3, 7,2,6,3, 7,2,7,3, 7,2,8,3, + 7,2,9,3, 7,3,0,3, 7,3,1,3, 7,3,2,3, 7,3,3,3, 7,3,4,3, 7,3,5,3, 7,3,6,3, 7,3,7,3, + 7,3,8,3, 7,3,9,3, 7,4,0,3, 7,4,1,3, 7,4,2,3, 7,4,3,3, 7,4,4,3, 7,4,5,3, 7,4,6,3, + 7,4,7,3, 7,4,8,3, 7,4,9,3, 7,5,0,3, 7,5,1,3, 7,5,2,3, 7,5,3,3, 7,5,4,3, 7,5,5,3, + 7,5,6,3, 7,5,7,3, 7,5,8,3, 7,5,9,3, 7,6,0,3, 7,6,1,3, 7,6,2,3, 7,6,3,3, 7,6,4,3, + 7,6,5,3, 7,6,6,3, 7,6,7,3, 7,6,8,3, 7,6,9,3, 7,7,0,3, 7,7,1,3, 7,7,2,3, 7,7,3,3, + 7,7,4,3, 7,7,5,3, 7,7,6,3, 7,7,7,3, 7,7,8,3, 7,7,9,3, 7,8,0,3, 7,8,1,3, 7,8,2,3, + 7,8,3,3, 7,8,4,3, 7,8,5,3, 7,8,6,3, 7,8,7,3, 7,8,8,3, 7,8,9,3, 7,9,0,3, 7,9,1,3, + 7,9,2,3, 7,9,3,3, 7,9,4,3, 7,9,5,3, 7,9,6,3, 7,9,7,3, 7,9,8,3, 7,9,9,3, 8,0,0,3, + 8,0,1,3, 8,0,2,3, 8,0,3,3, 8,0,4,3, 8,0,5,3, 8,0,6,3, 8,0,7,3, 8,0,8,3, 8,0,9,3, + 8,1,0,3, 8,1,1,3, 8,1,2,3, 8,1,3,3, 8,1,4,3, 8,1,5,3, 8,1,6,3, 8,1,7,3, 8,1,8,3, + 8,1,9,3, 8,2,0,3, 8,2,1,3, 8,2,2,3, 8,2,3,3, 8,2,4,3, 8,2,5,3, 8,2,6,3, 8,2,7,3, + 8,2,8,3, 8,2,9,3, 8,3,0,3, 8,3,1,3, 8,3,2,3, 8,3,3,3, 8,3,4,3, 8,3,5,3, 8,3,6,3, + 8,3,7,3, 8,3,8,3, 8,3,9,3, 8,4,0,3, 8,4,1,3, 8,4,2,3, 8,4,3,3, 8,4,4,3, 8,4,5,3, + 8,4,6,3, 8,4,7,3, 8,4,8,3, 8,4,9,3, 8,5,0,3, 8,5,1,3, 8,5,2,3, 8,5,3,3, 8,5,4,3, + 8,5,5,3, 8,5,6,3, 8,5,7,3, 8,5,8,3, 8,5,9,3, 8,6,0,3, 8,6,1,3, 8,6,2,3, 8,6,3,3, + 8,6,4,3, 8,6,5,3, 8,6,6,3, 8,6,7,3, 8,6,8,3, 8,6,9,3, 8,7,0,3, 8,7,1,3, 8,7,2,3, + 8,7,3,3, 8,7,4,3, 8,7,5,3, 8,7,6,3, 8,7,7,3, 8,7,8,3, 8,7,9,3, 8,8,0,3, 8,8,1,3, + 8,8,2,3, 8,8,3,3, 8,8,4,3, 8,8,5,3, 8,8,6,3, 8,8,7,3, 8,8,8,3, 8,8,9,3, 8,9,0,3, + 8,9,1,3, 8,9,2,3, 8,9,3,3, 8,9,4,3, 8,9,5,3, 8,9,6,3, 8,9,7,3, 8,9,8,3, 8,9,9,3, + 9,0,0,3, 9,0,1,3, 9,0,2,3, 9,0,3,3, 9,0,4,3, 9,0,5,3, 9,0,6,3, 9,0,7,3, 9,0,8,3, + 9,0,9,3, 9,1,0,3, 9,1,1,3, 9,1,2,3, 9,1,3,3, 9,1,4,3, 9,1,5,3, 9,1,6,3, 9,1,7,3, + 9,1,8,3, 9,1,9,3, 9,2,0,3, 9,2,1,3, 9,2,2,3, 9,2,3,3, 9,2,4,3, 9,2,5,3, 9,2,6,3, + 9,2,7,3, 9,2,8,3, 9,2,9,3, 9,3,0,3, 9,3,1,3, 9,3,2,3, 9,3,3,3, 9,3,4,3, 9,3,5,3, + 9,3,6,3, 9,3,7,3, 9,3,8,3, 9,3,9,3, 9,4,0,3, 9,4,1,3, 9,4,2,3, 9,4,3,3, 9,4,4,3, + 9,4,5,3, 9,4,6,3, 9,4,7,3, 9,4,8,3, 9,4,9,3, 9,5,0,3, 9,5,1,3, 9,5,2,3, 9,5,3,3, + 9,5,4,3, 9,5,5,3, 9,5,6,3, 9,5,7,3, 9,5,8,3, 9,5,9,3, 9,6,0,3, 9,6,1,3, 9,6,2,3, + 9,6,3,3, 9,6,4,3, 9,6,5,3, 9,6,6,3, 9,6,7,3, 9,6,8,3, 9,6,9,3, 9,7,0,3, 9,7,1,3, + 9,7,2,3, 9,7,3,3, 9,7,4,3, 9,7,5,3, 9,7,6,3, 9,7,7,3, 9,7,8,3, 9,7,9,3, 9,8,0,3, + 9,8,1,3, 9,8,2,3, 9,8,3,3, 9,8,4,3, 9,8,5,3, 9,8,6,3, 9,8,7,3, 9,8,8,3, 9,8,9,3, + 9,9,0,3, 9,9,1,3, 9,9,2,3, 9,9,3,3, 9,9,4,3, 9,9,5,3, 9,9,6,3, 9,9,7,3, 9,9,8,3, + 9,9,9,3}; +#endif + diff --git a/libdecnumber/decDouble.c b/libdecnumber/decDouble.c new file mode 100644 index 0000000..ba6a0af --- /dev/null +++ b/libdecnumber/decDouble.c @@ -0,0 +1,154 @@ +/* decDouble module for the decNumber C Library. + Copyright (C) 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* decDouble.c -- decDouble operations module */ +/* ------------------------------------------------------------------ */ +/* This module comprises decDouble operations (including conversions) */ +/* ------------------------------------------------------------------ */ + +#include "decContext.h" /* public includes */ +#include "decDouble.h" /* .. */ + +/* Constant mappings for shared code */ +#define DECPMAX DECDOUBLE_Pmax +#define DECEMIN DECDOUBLE_Emin +#define DECEMAX DECDOUBLE_Emax +#define DECEMAXD DECDOUBLE_EmaxD +#define DECBYTES DECDOUBLE_Bytes +#define DECSTRING DECDOUBLE_String +#define DECECONL DECDOUBLE_EconL +#define DECBIAS DECDOUBLE_Bias +#define DECLETS DECDOUBLE_Declets +#define DECQTINY (-DECDOUBLE_Bias) +/* parameters of next-wider format */ +#define DECWBYTES DECQUAD_Bytes +#define DECWPMAX DECQUAD_Pmax +#define DECWECONL DECQUAD_EconL +#define DECWBIAS DECQUAD_Bias + +/* Type and function mappings for shared code */ +#define decFloat decDouble /* Type name */ +#define decFloatWider decQuad /* Type name */ + +/* Utilities and conversions (binary results, extractors, etc.) */ +#define decFloatFromBCD decDoubleFromBCD +#define decFloatFromInt32 decDoubleFromInt32 +#define decFloatFromPacked decDoubleFromPacked +#define decFloatFromString decDoubleFromString +#define decFloatFromUInt32 decDoubleFromUInt32 +#define decFloatFromWider decDoubleFromWider +#define decFloatGetCoefficient decDoubleGetCoefficient +#define decFloatGetExponent decDoubleGetExponent +#define decFloatSetCoefficient decDoubleSetCoefficient +#define decFloatSetExponent decDoubleSetExponent +#define decFloatShow decDoubleShow +#define decFloatToBCD decDoubleToBCD +#define decFloatToEngString decDoubleToEngString +#define decFloatToInt32 decDoubleToInt32 +#define decFloatToInt32Exact decDoubleToInt32Exact +#define decFloatToPacked decDoubleToPacked +#define decFloatToString decDoubleToString +#define decFloatToUInt32 decDoubleToUInt32 +#define decFloatToUInt32Exact decDoubleToUInt32Exact +#define decFloatToWider decDoubleToWider +#define decFloatZero decDoubleZero + +/* Computational (result is a decFloat) */ +#define decFloatAbs decDoubleAbs +#define decFloatAdd decDoubleAdd +#define decFloatAnd decDoubleAnd +#define decFloatDivide decDoubleDivide +#define decFloatDivideInteger decDoubleDivideInteger +#define decFloatFMA decDoubleFMA +#define decFloatInvert decDoubleInvert +#define decFloatLogB decDoubleLogB +#define decFloatMax decDoubleMax +#define decFloatMaxMag decDoubleMaxMag +#define decFloatMin decDoubleMin +#define decFloatMinMag decDoubleMinMag +#define decFloatMinus decDoubleMinus +#define decFloatMultiply decDoubleMultiply +#define decFloatNextMinus decDoubleNextMinus +#define decFloatNextPlus decDoubleNextPlus +#define decFloatNextToward decDoubleNextToward +#define decFloatOr decDoubleOr +#define decFloatPlus decDoublePlus +#define decFloatQuantize decDoubleQuantize +#define decFloatReduce decDoubleReduce +#define decFloatRemainder decDoubleRemainder +#define decFloatRemainderNear decDoubleRemainderNear +#define decFloatRotate decDoubleRotate +#define decFloatScaleB decDoubleScaleB +#define decFloatShift decDoubleShift +#define decFloatSubtract decDoubleSubtract +#define decFloatToIntegralValue decDoubleToIntegralValue +#define decFloatToIntegralExact decDoubleToIntegralExact +#define decFloatXor decDoubleXor + +/* Comparisons */ +#define decFloatCompare decDoubleCompare +#define decFloatCompareSignal decDoubleCompareSignal +#define decFloatCompareTotal decDoubleCompareTotal +#define decFloatCompareTotalMag decDoubleCompareTotalMag + +/* Copies */ +#define decFloatCanonical decDoubleCanonical +#define decFloatCopy decDoubleCopy +#define decFloatCopyAbs decDoubleCopyAbs +#define decFloatCopyNegate decDoubleCopyNegate +#define decFloatCopySign decDoubleCopySign + +/* Non-computational */ +#define decFloatClass decDoubleClass +#define decFloatClassString decDoubleClassString +#define decFloatDigits decDoubleDigits +#define decFloatIsCanonical decDoubleIsCanonical +#define decFloatIsFinite decDoubleIsFinite +#define decFloatIsInfinite decDoubleIsInfinite +#define decFloatIsInteger decDoubleIsInteger +#define decFloatIsNaN decDoubleIsNaN +#define decFloatIsNormal decDoubleIsNormal +#define decFloatIsSignaling decDoubleIsSignaling +#define decFloatIsSignalling decDoubleIsSignalling +#define decFloatIsSigned decDoubleIsSigned +#define decFloatIsSubnormal decDoubleIsSubnormal +#define decFloatIsZero decDoubleIsZero +#define decFloatRadix decDoubleRadix +#define decFloatSameQuantum decDoubleSameQuantum +#define decFloatVersion decDoubleVersion + + +#include "decNumberLocal.h" /* local includes (need DECPMAX) */ +#include "decCommon.c" /* non-arithmetic decFloat routines */ +#include "decBasic.c" /* basic formats routines */ + +/* Below here will move to shared file as completed */ + diff --git a/libdecnumber/decDouble.h b/libdecnumber/decDouble.h new file mode 100644 index 0000000..32eba39 --- /dev/null +++ b/libdecnumber/decDouble.h @@ -0,0 +1,164 @@ +/* decDouble module header for the decNumber C Library. + Copyright (C) 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* decDouble.h -- Decimal 64-bit format module header */ +/* ------------------------------------------------------------------ */ +/* Please see decFloats.h for an overview and documentation details. */ +/* ------------------------------------------------------------------ */ + +#if !defined(DECDOUBLE) + #define DECDOUBLE + + #define DECDOUBLENAME "decimalDouble" /* Short name */ + #define DECDOUBLETITLE "Decimal 64-bit datum" /* Verbose name */ + #define DECDOUBLEAUTHOR "Mike Cowlishaw" /* Who to blame */ + + /* parameters for decDoubles */ + #define DECDOUBLE_Bytes 8 /* length */ + #define DECDOUBLE_Pmax 16 /* maximum precision (digits) */ + #define DECDOUBLE_Emin -383 /* minimum adjusted exponent */ + #define DECDOUBLE_Emax 384 /* maximum adjusted exponent */ + #define DECDOUBLE_EmaxD 3 /* maximum exponent digits */ + #define DECDOUBLE_Bias 398 /* bias for the exponent */ + #define DECDOUBLE_String 25 /* maximum string length, +1 */ + #define DECDOUBLE_EconL 8 /* exponent continuation length */ + #define DECDOUBLE_Declets 5 /* count of declets */ + /* highest biased exponent (Elimit-1) */ + #define DECDOUBLE_Ehigh (DECDOUBLE_Emax + DECDOUBLE_Bias - (DECDOUBLE_Pmax-1)) + + /* Required includes */ + #include "decContext.h" + #include "decQuad.h" + + /* The decDouble decimal 64-bit type, accessible by bytes */ + typedef struct { + uint8_t bytes[DECDOUBLE_Bytes]; /* fields: 1, 5, 8, 50 bits */ + } decDouble; + + /* ---------------------------------------------------------------- */ + /* Routines -- implemented as decFloat routines in common files */ + /* ---------------------------------------------------------------- */ + + #include "decDoubleSymbols.h" + + /* Utilities and conversions, extractors, etc.) */ + extern decDouble * decDoubleFromBCD(decDouble *, int32_t, const uint8_t *, int32_t); + extern decDouble * decDoubleFromInt32(decDouble *, int32_t); + extern decDouble * decDoubleFromPacked(decDouble *, int32_t, const uint8_t *); + extern decDouble * decDoubleFromString(decDouble *, const char *, decContext *); + extern decDouble * decDoubleFromUInt32(decDouble *, uint32_t); + extern decDouble * decDoubleFromWider(decDouble *, const decQuad *, decContext *); + extern int32_t decDoubleGetCoefficient(const decDouble *, uint8_t *); + extern int32_t decDoubleGetExponent(const decDouble *); + extern decDouble * decDoubleSetCoefficient(decDouble *, const uint8_t *, int32_t); + extern decDouble * decDoubleSetExponent(decDouble *, decContext *, int32_t); + extern void decDoubleShow(const decDouble *, const char *); + extern int32_t decDoubleToBCD(const decDouble *, int32_t *, uint8_t *); + extern char * decDoubleToEngString(const decDouble *, char *); + extern int32_t decDoubleToInt32(const decDouble *, decContext *, enum rounding); + extern int32_t decDoubleToInt32Exact(const decDouble *, decContext *, enum rounding); + extern int32_t decDoubleToPacked(const decDouble *, int32_t *, uint8_t *); + extern char * decDoubleToString(const decDouble *, char *); + extern uint32_t decDoubleToUInt32(const decDouble *, decContext *, enum rounding); + extern uint32_t decDoubleToUInt32Exact(const decDouble *, decContext *, enum rounding); + extern decQuad * decDoubleToWider(const decDouble *, decQuad *); + extern decDouble * decDoubleZero(decDouble *); + + /* Computational (result is a decDouble) */ + extern decDouble * decDoubleAbs(decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleAdd(decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleAnd(decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleDivide(decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleDivideInteger(decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleFMA(decDouble *, const decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleInvert(decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleLogB(decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleMax(decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleMaxMag(decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleMin(decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleMinMag(decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleMinus(decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleMultiply(decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleNextMinus(decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleNextPlus(decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleNextToward(decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleOr(decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoublePlus(decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleQuantize(decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleReduce(decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleRemainder(decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleRemainderNear(decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleRotate(decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleScaleB(decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleShift(decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleSubtract(decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleToIntegralValue(decDouble *, const decDouble *, decContext *, enum rounding); + extern decDouble * decDoubleToIntegralExact(decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleXor(decDouble *, const decDouble *, const decDouble *, decContext *); + + /* Comparisons */ + extern decDouble * decDoubleCompare(decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleCompareSignal(decDouble *, const decDouble *, const decDouble *, decContext *); + extern decDouble * decDoubleCompareTotal(decDouble *, const decDouble *, const decDouble *); + extern decDouble * decDoubleCompareTotalMag(decDouble *, const decDouble *, const decDouble *); + + /* Copies */ + extern decDouble * decDoubleCanonical(decDouble *, const decDouble *); + extern decDouble * decDoubleCopy(decDouble *, const decDouble *); + extern decDouble * decDoubleCopyAbs(decDouble *, const decDouble *); + extern decDouble * decDoubleCopyNegate(decDouble *, const decDouble *); + extern decDouble * decDoubleCopySign(decDouble *, const decDouble *, const decDouble *); + + /* Non-computational */ + extern enum decClass decDoubleClass(const decDouble *); + extern const char * decDoubleClassString(const decDouble *); + extern uint32_t decDoubleDigits(const decDouble *); + extern uint32_t decDoubleIsCanonical(const decDouble *); + extern uint32_t decDoubleIsFinite(const decDouble *); + extern uint32_t decDoubleIsInfinite(const decDouble *); + extern uint32_t decDoubleIsInteger(const decDouble *); + extern uint32_t decDoubleIsNaN(const decDouble *); + extern uint32_t decDoubleIsNormal(const decDouble *); + extern uint32_t decDoubleIsSignaling(const decDouble *); + extern uint32_t decDoubleIsSignalling(const decDouble *); + extern uint32_t decDoubleIsSigned(const decDouble *); + extern uint32_t decDoubleIsSubnormal(const decDouble *); + extern uint32_t decDoubleIsZero(const decDouble *); + extern uint32_t decDoubleRadix(const decDouble *); + extern uint32_t decDoubleSameQuantum(const decDouble *, const decDouble *); + extern const char * decDoubleVersion(void); + + /* decNumber conversions; these are implemented as macros so as not */ + /* to force a dependency on decimal64 and decNumber in decDouble. */ + #define decDoubleToNumber(dq, dn) decimal64ToNumber((decimal64 *)(dq), dn) + #define decDoubleFromNumber(dq, dn, set) (decDouble *)decimal64FromNumber((decimal64 *)(dq), dn, set) + +#endif diff --git a/libdecnumber/decDoubleSymbols.h b/libdecnumber/decDoubleSymbols.h new file mode 100644 index 0000000..add1248 --- /dev/null +++ b/libdecnumber/decDoubleSymbols.h @@ -0,0 +1,84 @@ +#if !defined(DECDOUBLESYMBOLS) +#define DECDOUBLESYMBOLS + +#ifdef IN_LIBGCC2 +#define decDoubleAbs __decDoubleAbs +#define decDoubleAdd __decDoubleAdd +#define decDoubleAnd __decDoubleAnd +#define decDoubleCanonical __decDoubleCanonical +#define decDoubleClass __decDoubleClass +#define decDoubleClassString __decDoubleClassString +#define decDoubleCompare __decDoubleCompare +#define decDoubleCompareSignal __decDoubleCompareSignal +#define decDoubleCompareTotal __decDoubleCompareTotal +#define decDoubleCompareTotalMag __decDoubleCompareTotalMag +#define decDoubleCopy __decDoubleCopy +#define decDoubleCopyAbs __decDoubleCopyAbs +#define decDoubleCopyNegate __decDoubleCopyNegate +#define decDoubleCopySign __decDoubleCopySign +#define decDoubleDigits __decDoubleDigits +#define decDoubleDivide __decDoubleDivide +#define decDoubleDivideInteger __decDoubleDivideInteger +#define decDoubleFMA __decDoubleFMA +#define decDoubleFromBCD __decDoubleFromBCD +#define decDoubleFromInt32 __decDoubleFromInt32 +#define decDoubleFromPacked __decDoubleFromPacked +#define decDoubleFromString __decDoubleFromString +#define decDoubleFromUInt32 __decDoubleFromUInt32 +#define decDoubleFromWider __decDoubleFromWider +#define decDoubleGetCoefficient __decDoubleGetCoefficient +#define decDoubleGetExponent __decDoubleGetExponent +#define decDoubleInvert __decDoubleInvert +#define decDoubleIsCanonical __decDoubleIsCanonical +#define decDoubleIsFinite __decDoubleIsFinite +#define decDoubleIsInfinite __decDoubleIsInfinite +#define decDoubleIsInteger __decDoubleIsInteger +#define decDoubleIsNaN __decDoubleIsNaN +#define decDoubleIsNormal __decDoubleIsNormal +#define decDoubleIsSignaling __decDoubleIsSignaling +#define decDoubleIsSignalling __decDoubleIsSignalling +#define decDoubleIsSigned __decDoubleIsSigned +#define decDoubleIsSubnormal __decDoubleIsSubnormal +#define decDoubleIsZero __decDoubleIsZero +#define decDoubleLogB __decDoubleLogB +#define decDoubleMax __decDoubleMax +#define decDoubleMaxMag __decDoubleMaxMag +#define decDoubleMin __decDoubleMin +#define decDoubleMinMag __decDoubleMinMag +#define decDoubleMinus __decDoubleMinus +#define decDoubleMultiply __decDoubleMultiply +#define decDoubleNextMinus __decDoubleNextMinus +#define decDoubleNextPlus __decDoubleNextPlus +#define decDoubleNextToward __decDoubleNextToward +#define decDoubleOr __decDoubleOr +#define decDoublePlus __decDoublePlus +#define decDoubleQuantize __decDoubleQuantize +#define decDoubleRadix __decDoubleRadix +#define decDoubleReduce __decDoubleReduce +#define decDoubleRemainder __decDoubleRemainder +#define decDoubleRemainderNear __decDoubleRemainderNear +#define decDoubleRotate __decDoubleRotate +#define decDoubleSameQuantum __decDoubleSameQuantum +#define decDoubleScaleB __decDoubleScaleB +#define decDoubleSetCoefficient __decDoubleSetCoefficient +#define decDoubleSetExponent __decDoubleSetExponent +#define decDoubleShift __decDoubleShift +#define decDoubleShow __decDoubleShow +#define decDoubleSubtract __decDoubleSubtract +#define decDoubleToBCD __decDoubleToBCD +#define decDoubleToEngString __decDoubleToEngString +#define decDoubleToInt32 __decDoubleToInt32 +#define decDoubleToInt32Exact __decDoubleToInt32Exact +#define decDoubleToIntegralExact __decDoubleToIntegralExact +#define decDoubleToIntegralValue __decDoubleToIntegralValue +#define decDoubleToPacked __decDoubleToPacked +#define decDoubleToString __decDoubleToString +#define decDoubleToUInt32 __decDoubleToUInt32 +#define decDoubleToUInt32Exact __decDoubleToUInt32Exact +#define decDoubleToWider __decDoubleToWider +#define decDoubleVersion __decDoubleVersion +#define decDoubleXor __decDoubleXor +#define decDoubleZero __decDoubleZero +#endif + +#endif diff --git a/libdecnumber/decExcept.c b/libdecnumber/decExcept.c new file mode 100644 index 0000000..6821702 --- /dev/null +++ b/libdecnumber/decExcept.c @@ -0,0 +1,59 @@ +/* Temporary library support for decimal floating point. + Copyright (C) 2005, 2006 Free Software Foundation, Inc. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it + under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + In addition to the permissions in the GNU General Public License, the + Free Software Foundation gives you unlimited permission to link the + compiled version of this file into combinations with other programs, + and to distribute those combinations without any restriction coming + from the use of this file. (The General Public License restrictions + do apply in other respects; for example, they cover modification of + the file, and distribution when not linked into a combine + executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public + License for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +#include <fenv.h> +#include "config.h" +#include "decContext.h" +#include "decExcept.h" + +/* Internal, non-documented functions for testing libgcc functions. + This support is not sufficient for real use. */ + +static int __dfp_except_flags = 0; + +/* Clear the dummy exception flags. */ +void +__dfp_clear_except (void) +{ + __dfp_except_flags = 0; +} + +/* Return the dummy exception flags corresponding to the mask. */ +int +__dfp_test_except (int mask) +{ + return __dfp_except_flags & mask; +} + +/* Set dummy exception flags. */ +void +__dfp_raise_except (int flags) +{ + __dfp_except_flags |= flags; +} diff --git a/libdecnumber/decExcept.h b/libdecnumber/decExcept.h new file mode 100644 index 0000000..12ba87d --- /dev/null +++ b/libdecnumber/decExcept.h @@ -0,0 +1,39 @@ +/* Temporary library support for decimal floating point. + Copyright (C) 2006 Free Software Foundation, Inc. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it + under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + In addition to the permissions in the GNU General Public License, the + Free Software Foundation gives you unlimited permission to link the + compiled version of this file into combinations with other programs, + and to distribute those combinations without any restriction coming + from the use of this file. (The General Public License restrictions + do apply in other respects; for example, they cover modification of + the file, and distribution when not linked into a combine + executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public + License for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +#include <fenv.h> +#include "config.h" +#include "decContext.h" + +#define DFP_EXCEPTIONS_ENABLED 1 +#define DFP_HANDLE_EXCEPTIONS(A) __dfp_raise_except(A) + +void __dfp_clear_except (void); +int __dfp_test_except (int); +void __dfp_raise_except (int); diff --git a/libdecnumber/decLibrary.c b/libdecnumber/decLibrary.c new file mode 100644 index 0000000..7e5e928 --- /dev/null +++ b/libdecnumber/decLibrary.c @@ -0,0 +1,76 @@ +/* Temporary library support for decimal floating point. + Copyright (C) 2005, 2006 Free Software Foundation, Inc. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it + under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public + License for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +#include "config.h" +#include "decContext.h" +#include "decimal128.h" +#include "decimal64.h" +#include "decimal32.h" + +void __host_to_ieee_32 (_Decimal32, decimal32 *); +void __host_to_ieee_64 (_Decimal64, decimal64 *); +void __host_to_ieee_128 (_Decimal128, decimal128 *); + +extern int isinfd32 (_Decimal32); +extern int isinfd64 (_Decimal64); +extern int isinfd128 (_Decimal128); +uint32_t __dec_byte_swap (uint32_t); + +int +isinfd32 (_Decimal32 arg) +{ + decNumber dn; + decimal32 d32; + + __host_to_ieee_32 (arg, &d32); + decimal32ToNumber (&d32, &dn); + return (decNumberIsInfinite (&dn)); +} + +int +isinfd64 (_Decimal64 arg) +{ + decNumber dn; + decimal64 d64; + + __host_to_ieee_64 (arg, &d64); + decimal64ToNumber (&d64, &dn); + return (decNumberIsInfinite (&dn)); +} + +int +isinfd128 (_Decimal128 arg) +{ + decNumber dn; + decimal128 d128; + + __host_to_ieee_128 (arg, &d128); + decimal128ToNumber (&d128, &dn); + return (decNumberIsInfinite (&dn)); +} diff --git a/libdecnumber/decNumber.c b/libdecnumber/decNumber.c new file mode 100644 index 0000000..c5e223c --- /dev/null +++ b/libdecnumber/decNumber.c @@ -0,0 +1,8122 @@ +/* Decimal number arithmetic module for the decNumber C Library. + Copyright (C) 2005, 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* Decimal Number arithmetic module */ +/* ------------------------------------------------------------------ */ +/* This module comprises the routines for General Decimal Arithmetic */ +/* as defined in the specification which may be found on the */ +/* http://www2.hursley.ibm.com/decimal web pages. It implements both */ +/* the full ('extended') arithmetic and the simpler ('subset') */ +/* arithmetic. */ +/* */ +/* Usage notes: */ +/* */ +/* 1. This code is ANSI C89 except: */ +/* */ +/* If DECDPUN>4 or DECUSE64=1, the C99 64-bit int64_t and */ +/* uint64_t types may be used. To avoid these, set DECUSE64=0 */ +/* and DECDPUN<=4 (see documentation). */ +/* */ +/* 2. The decNumber format which this library uses is optimized for */ +/* efficient processing of relatively short numbers; in particular */ +/* it allows the use of fixed sized structures and minimizes copy */ +/* and move operations. It does, however, support arbitrary */ +/* precision (up to 999,999,999 digits) and arbitrary exponent */ +/* range (Emax in the range 0 through 999,999,999 and Emin in the */ +/* range -999,999,999 through 0). Mathematical functions (for */ +/* example decNumberExp) as identified below are restricted more */ +/* tightly: digits, emax, and -emin in the context must be <= */ +/* DEC_MAX_MATH (999999), and their operand(s) must be within */ +/* these bounds. */ +/* */ +/* 3. Logical functions are further restricted; their operands must */ +/* be finite, positive, have an exponent of zero, and all digits */ +/* must be either 0 or 1. The result will only contain digits */ +/* which are 0 or 1 (and will have exponent=0 and a sign of 0). */ +/* */ +/* 4. Operands to operator functions are never modified unless they */ +/* are also specified to be the result number (which is always */ +/* permitted). Other than that case, operands must not overlap. */ +/* */ +/* 5. Error handling: the type of the error is ORed into the status */ +/* flags in the current context (decContext structure). The */ +/* SIGFPE signal is then raised if the corresponding trap-enabler */ +/* flag in the decContext is set (is 1). */ +/* */ +/* It is the responsibility of the caller to clear the status */ +/* flags as required. */ +/* */ +/* The result of any routine which returns a number will always */ +/* be a valid number (which may be a special value, such as an */ +/* Infinity or NaN). */ +/* */ +/* 6. The decNumber format is not an exchangeable concrete */ +/* representation as it comprises fields which may be machine- */ +/* dependent (packed or unpacked, or special length, for example). */ +/* Canonical conversions to and from strings are provided; other */ +/* conversions are available in separate modules. */ +/* */ +/* 7. Normally, input operands are assumed to be valid. Set DECCHECK */ +/* to 1 for extended operand checking (including NULL operands). */ +/* Results are undefined if a badly-formed structure (or a NULL */ +/* pointer to a structure) is provided, though with DECCHECK */ +/* enabled the operator routines are protected against exceptions. */ +/* (Except if the result pointer is NULL, which is unrecoverable.) */ +/* */ +/* However, the routines will never cause exceptions if they are */ +/* given well-formed operands, even if the value of the operands */ +/* is inappropriate for the operation and DECCHECK is not set. */ +/* (Except for SIGFPE, as and where documented.) */ +/* */ +/* 8. Subset arithmetic is available only if DECSUBSET is set to 1. */ +/* ------------------------------------------------------------------ */ +/* Implementation notes for maintenance of this module: */ +/* */ +/* 1. Storage leak protection: Routines which use malloc are not */ +/* permitted to use return for fastpath or error exits (i.e., */ +/* they follow strict structured programming conventions). */ +/* Instead they have a do{}while(0); construct surrounding the */ +/* code which is protected -- break may be used to exit this. */ +/* Other routines can safely use the return statement inline. */ +/* */ +/* Storage leak accounting can be enabled using DECALLOC. */ +/* */ +/* 2. All loops use the for(;;) construct. Any do construct does */ +/* not loop; it is for allocation protection as just described. */ +/* */ +/* 3. Setting status in the context must always be the very last */ +/* action in a routine, as non-0 status may raise a trap and hence */ +/* the call to set status may not return (if the handler uses long */ +/* jump). Therefore all cleanup must be done first. In general, */ +/* to achieve this status is accumulated and is only applied just */ +/* before return by calling decContextSetStatus (via decStatus). */ +/* */ +/* Routines which allocate storage cannot, in general, use the */ +/* 'top level' routines which could cause a non-returning */ +/* transfer of control. The decXxxxOp routines are safe (do not */ +/* call decStatus even if traps are set in the context) and should */ +/* be used instead (they are also a little faster). */ +/* */ +/* 4. Exponent checking is minimized by allowing the exponent to */ +/* grow outside its limits during calculations, provided that */ +/* the decFinalize function is called later. Multiplication and */ +/* division, and intermediate calculations in exponentiation, */ +/* require more careful checks because of the risk of 31-bit */ +/* overflow (the most negative valid exponent is -1999999997, for */ +/* a 999999999-digit number with adjusted exponent of -999999999). */ +/* */ +/* 5. Rounding is deferred until finalization of results, with any */ +/* 'off to the right' data being represented as a single digit */ +/* residue (in the range -1 through 9). This avoids any double- */ +/* rounding when more than one shortening takes place (for */ +/* example, when a result is subnormal). */ +/* */ +/* 6. The digits count is allowed to rise to a multiple of DECDPUN */ +/* during many operations, so whole Units are handled and exact */ +/* accounting of digits is not needed. The correct digits value */ +/* is found by decGetDigits, which accounts for leading zeros. */ +/* This must be called before any rounding if the number of digits */ +/* is not known exactly. */ +/* */ +/* 7. The multiply-by-reciprocal 'trick' is used for partitioning */ +/* numbers up to four digits, using appropriate constants. This */ +/* is not useful for longer numbers because overflow of 32 bits */ +/* would lead to 4 multiplies, which is almost as expensive as */ +/* a divide (unless a floating-point or 64-bit multiply is */ +/* assumed to be available). */ +/* */ +/* 8. Unusual abbreviations that may be used in the commentary: */ +/* lhs -- left hand side (operand, of an operation) */ +/* lsd -- least significant digit (of coefficient) */ +/* lsu -- least significant Unit (of coefficient) */ +/* msd -- most significant digit (of coefficient) */ +/* msi -- most significant item (in an array) */ +/* msu -- most significant Unit (of coefficient) */ +/* rhs -- right hand side (operand, of an operation) */ +/* +ve -- positive */ +/* -ve -- negative */ +/* ** -- raise to the power */ +/* ------------------------------------------------------------------ */ + +#include <stdlib.h> /* for malloc, free, etc. */ +#include <stdio.h> /* for printf [if needed] */ +#include <string.h> /* for strcpy */ +#include <ctype.h> /* for lower */ +#include "config.h" /* for GCC definitions */ +#include "decNumber.h" /* base number library */ +#include "decNumberLocal.h" /* decNumber local types, etc. */ + +/* Constants */ +/* Public lookup table used by the D2U macro */ +const uByte d2utable[DECMAXD2U+1]=D2UTABLE; + +#define DECVERB 1 /* set to 1 for verbose DECCHECK */ +#define powers DECPOWERS /* old internal name */ + +/* Local constants */ +#define DIVIDE 0x80 /* Divide operators */ +#define REMAINDER 0x40 /* .. */ +#define DIVIDEINT 0x20 /* .. */ +#define REMNEAR 0x10 /* .. */ +#define COMPARE 0x01 /* Compare operators */ +#define COMPMAX 0x02 /* .. */ +#define COMPMIN 0x03 /* .. */ +#define COMPTOTAL 0x04 /* .. */ +#define COMPNAN 0x05 /* .. [NaN processing] */ +#define COMPSIG 0x06 /* .. [signaling COMPARE] */ +#define COMPMAXMAG 0x07 /* .. */ +#define COMPMINMAG 0x08 /* .. */ + +#define DEC_sNaN 0x40000000 /* local status: sNaN signal */ +#define BADINT (Int)0x80000000 /* most-negative Int; error indicator */ +/* Next two indicate an integer >= 10**6, and its parity (bottom bit) */ +#define BIGEVEN (Int)0x80000002 +#define BIGODD (Int)0x80000003 + +static Unit uarrone[1]={1}; /* Unit array of 1, used for incrementing */ + +/* Granularity-dependent code */ +#if DECDPUN<=4 + #define eInt Int /* extended integer */ + #define ueInt uInt /* unsigned extended integer */ + /* Constant multipliers for divide-by-power-of five using reciprocal */ + /* multiply, after removing powers of 2 by shifting, and final shift */ + /* of 17 [we only need up to **4] */ + static const uInt multies[]={131073, 26215, 5243, 1049, 210}; + /* QUOT10 -- macro to return the quotient of unit u divided by 10**n */ + #define QUOT10(u, n) ((((uInt)(u)>>(n))*multies[n])>>17) +#else + /* For DECDPUN>4 non-ANSI-89 64-bit types are needed. */ + #if !DECUSE64 + #error decNumber.c: DECUSE64 must be 1 when DECDPUN>4 + #endif + #define eInt Long /* extended integer */ + #define ueInt uLong /* unsigned extended integer */ +#endif + +/* Local routines */ +static decNumber * decAddOp(decNumber *, const decNumber *, const decNumber *, + decContext *, uByte, uInt *); +static Flag decBiStr(const char *, const char *, const char *); +static uInt decCheckMath(const decNumber *, decContext *, uInt *); +static void decApplyRound(decNumber *, decContext *, Int, uInt *); +static Int decCompare(const decNumber *lhs, const decNumber *rhs, Flag); +static decNumber * decCompareOp(decNumber *, const decNumber *, + const decNumber *, decContext *, + Flag, uInt *); +static void decCopyFit(decNumber *, const decNumber *, decContext *, + Int *, uInt *); +static decNumber * decDecap(decNumber *, Int); +static decNumber * decDivideOp(decNumber *, const decNumber *, + const decNumber *, decContext *, Flag, uInt *); +static decNumber * decExpOp(decNumber *, const decNumber *, + decContext *, uInt *); +static void decFinalize(decNumber *, decContext *, Int *, uInt *); +static Int decGetDigits(Unit *, Int); +static Int decGetInt(const decNumber *); +static decNumber * decLnOp(decNumber *, const decNumber *, + decContext *, uInt *); +static decNumber * decMultiplyOp(decNumber *, const decNumber *, + const decNumber *, decContext *, + uInt *); +static decNumber * decNaNs(decNumber *, const decNumber *, + const decNumber *, decContext *, uInt *); +static decNumber * decQuantizeOp(decNumber *, const decNumber *, + const decNumber *, decContext *, Flag, + uInt *); +static void decReverse(Unit *, Unit *); +static void decSetCoeff(decNumber *, decContext *, const Unit *, + Int, Int *, uInt *); +static void decSetMaxValue(decNumber *, decContext *); +static void decSetOverflow(decNumber *, decContext *, uInt *); +static void decSetSubnormal(decNumber *, decContext *, Int *, uInt *); +static Int decShiftToLeast(Unit *, Int, Int); +static Int decShiftToMost(Unit *, Int, Int); +static void decStatus(decNumber *, uInt, decContext *); +static void decToString(const decNumber *, char[], Flag); +static decNumber * decTrim(decNumber *, decContext *, Flag, Int *); +static Int decUnitAddSub(const Unit *, Int, const Unit *, Int, Int, + Unit *, Int); +static Int decUnitCompare(const Unit *, Int, const Unit *, Int, Int); + +#if !DECSUBSET +/* decFinish == decFinalize when no subset arithmetic needed */ +#define decFinish(a,b,c,d) decFinalize(a,b,c,d) +#else +static void decFinish(decNumber *, decContext *, Int *, uInt *); +static decNumber * decRoundOperand(const decNumber *, decContext *, uInt *); +#endif + +/* Local macros */ +/* masked special-values bits */ +#define SPECIALARG (rhs->bits & DECSPECIAL) +#define SPECIALARGS ((lhs->bits | rhs->bits) & DECSPECIAL) + +/* Diagnostic macros, etc. */ +#if DECALLOC +/* Handle malloc/free accounting. If enabled, our accountable routines */ +/* are used; otherwise the code just goes straight to the system malloc */ +/* and free routines. */ +#define malloc(a) decMalloc(a) +#define free(a) decFree(a) +#define DECFENCE 0x5a /* corruption detector */ +/* 'Our' malloc and free: */ +static void *decMalloc(size_t); +static void decFree(void *); +uInt decAllocBytes=0; /* count of bytes allocated */ +/* Note that DECALLOC code only checks for storage buffer overflow. */ +/* To check for memory leaks, the decAllocBytes variable must be */ +/* checked to be 0 at appropriate times (e.g., after the test */ +/* harness completes a set of tests). This checking may be unreliable */ +/* if the testing is done in a multi-thread environment. */ +#endif + +#if DECCHECK +/* Optional checking routines. Enabling these means that decNumber */ +/* and decContext operands to operator routines are checked for */ +/* correctness. This roughly doubles the execution time of the */ +/* fastest routines (and adds 600+ bytes), so should not normally be */ +/* used in 'production'. */ +/* decCheckInexact is used to check that inexact results have a full */ +/* complement of digits (where appropriate -- this is not the case */ +/* for Quantize, for example) */ +#define DECUNRESU ((decNumber *)(void *)0xffffffff) +#define DECUNUSED ((const decNumber *)(void *)0xffffffff) +#define DECUNCONT ((decContext *)(void *)(0xffffffff)) +static Flag decCheckOperands(decNumber *, const decNumber *, + const decNumber *, decContext *); +static Flag decCheckNumber(const decNumber *); +static void decCheckInexact(const decNumber *, decContext *); +#endif + +#if DECTRACE || DECCHECK +/* Optional trace/debugging routines (may or may not be used) */ +void decNumberShow(const decNumber *); /* displays the components of a number */ +static void decDumpAr(char, const Unit *, Int); +#endif + +/* ================================================================== */ +/* Conversions */ +/* ================================================================== */ + +/* ------------------------------------------------------------------ */ +/* from-int32 -- conversion from Int or uInt */ +/* */ +/* dn is the decNumber to receive the integer */ +/* in or uin is the integer to be converted */ +/* returns dn */ +/* */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberFromInt32(decNumber *dn, Int in) { + uInt unsig; + if (in>=0) unsig=in; + else { /* negative (possibly BADINT) */ + if (in==BADINT) unsig=(uInt)1073741824*2; /* special case */ + else unsig=-in; /* invert */ + } + /* in is now positive */ + decNumberFromUInt32(dn, unsig); + if (in<0) dn->bits=DECNEG; /* sign needed */ + return dn; + } /* decNumberFromInt32 */ + +decNumber * decNumberFromUInt32(decNumber *dn, uInt uin) { + Unit *up; /* work pointer */ + decNumberZero(dn); /* clean */ + if (uin==0) return dn; /* [or decGetDigits bad call] */ + for (up=dn->lsu; uin>0; up++) { + *up=(Unit)(uin%(DECDPUNMAX+1)); + uin=uin/(DECDPUNMAX+1); + } + dn->digits=decGetDigits(dn->lsu, up-dn->lsu); + return dn; + } /* decNumberFromUInt32 */ + +/* ------------------------------------------------------------------ */ +/* to-int32 -- conversion to Int or uInt */ +/* */ +/* dn is the decNumber to convert */ +/* set is the context for reporting errors */ +/* returns the converted decNumber, or 0 if Invalid is set */ +/* */ +/* Invalid is set if the decNumber does not have exponent==0 or if */ +/* it is a NaN, Infinite, or out-of-range. */ +/* ------------------------------------------------------------------ */ +Int decNumberToInt32(const decNumber *dn, decContext *set) { + #if DECCHECK + if (decCheckOperands(DECUNRESU, DECUNUSED, dn, set)) return 0; + #endif + + /* special or too many digits, or bad exponent */ + if (dn->bits&DECSPECIAL || dn->digits>10 || dn->exponent!=0) ; /* bad */ + else { /* is a finite integer with 10 or fewer digits */ + Int d; /* work */ + const Unit *up; /* .. */ + uInt hi=0, lo; /* .. */ + up=dn->lsu; /* -> lsu */ + lo=*up; /* get 1 to 9 digits */ + #if DECDPUN>1 /* split to higher */ + hi=lo/10; + lo=lo%10; + #endif + up++; + /* collect remaining Units, if any, into hi */ + for (d=DECDPUN; d<dn->digits; up++, d+=DECDPUN) hi+=*up*powers[d-1]; + /* now low has the lsd, hi the remainder */ + if (hi>214748364 || (hi==214748364 && lo>7)) { /* out of range? */ + /* most-negative is a reprieve */ + if (dn->bits&DECNEG && hi==214748364 && lo==8) return 0x80000000; + /* bad -- drop through */ + } + else { /* in-range always */ + Int i=X10(hi)+lo; + if (dn->bits&DECNEG) return -i; + return i; + } + } /* integer */ + decContextSetStatus(set, DEC_Invalid_operation); /* [may not return] */ + return 0; + } /* decNumberToInt32 */ + +uInt decNumberToUInt32(const decNumber *dn, decContext *set) { + #if DECCHECK + if (decCheckOperands(DECUNRESU, DECUNUSED, dn, set)) return 0; + #endif + /* special or too many digits, or bad exponent, or negative (<0) */ + if (dn->bits&DECSPECIAL || dn->digits>10 || dn->exponent!=0 + || (dn->bits&DECNEG && !ISZERO(dn))); /* bad */ + else { /* is a finite integer with 10 or fewer digits */ + Int d; /* work */ + const Unit *up; /* .. */ + uInt hi=0, lo; /* .. */ + up=dn->lsu; /* -> lsu */ + lo=*up; /* get 1 to 9 digits */ + #if DECDPUN>1 /* split to higher */ + hi=lo/10; + lo=lo%10; + #endif + up++; + /* collect remaining Units, if any, into hi */ + for (d=DECDPUN; d<dn->digits; up++, d+=DECDPUN) hi+=*up*powers[d-1]; + + /* now low has the lsd, hi the remainder */ + if (hi>429496729 || (hi==429496729 && lo>5)) ; /* no reprieve possible */ + else return X10(hi)+lo; + } /* integer */ + decContextSetStatus(set, DEC_Invalid_operation); /* [may not return] */ + return 0; + } /* decNumberToUInt32 */ + +/* ------------------------------------------------------------------ */ +/* to-scientific-string -- conversion to numeric string */ +/* to-engineering-string -- conversion to numeric string */ +/* */ +/* decNumberToString(dn, string); */ +/* decNumberToEngString(dn, string); */ +/* */ +/* dn is the decNumber to convert */ +/* string is the string where the result will be laid out */ +/* */ +/* string must be at least dn->digits+14 characters long */ +/* */ +/* No error is possible, and no status can be set. */ +/* ------------------------------------------------------------------ */ +char * decNumberToString(const decNumber *dn, char *string){ + decToString(dn, string, 0); + return string; + } /* DecNumberToString */ + +char * decNumberToEngString(const decNumber *dn, char *string){ + decToString(dn, string, 1); + return string; + } /* DecNumberToEngString */ + +/* ------------------------------------------------------------------ */ +/* to-number -- conversion from numeric string */ +/* */ +/* decNumberFromString -- convert string to decNumber */ +/* dn -- the number structure to fill */ +/* chars[] -- the string to convert ('\0' terminated) */ +/* set -- the context used for processing any error, */ +/* determining the maximum precision available */ +/* (set.digits), determining the maximum and minimum */ +/* exponent (set.emax and set.emin), determining if */ +/* extended values are allowed, and checking the */ +/* rounding mode if overflow occurs or rounding is */ +/* needed. */ +/* */ +/* The length of the coefficient and the size of the exponent are */ +/* checked by this routine, so the correct error (Underflow or */ +/* Overflow) can be reported or rounding applied, as necessary. */ +/* */ +/* If bad syntax is detected, the result will be a quiet NaN. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberFromString(decNumber *dn, const char chars[], + decContext *set) { + Int exponent=0; /* working exponent [assume 0] */ + uByte bits=0; /* working flags [assume +ve] */ + Unit *res; /* where result will be built */ + Unit resbuff[SD2U(DECBUFFER+9)];/* local buffer in case need temporary */ + /* [+9 allows for ln() constants] */ + Unit *allocres=NULL; /* -> allocated result, iff allocated */ + Int d=0; /* count of digits found in decimal part */ + const char *dotchar=NULL; /* where dot was found */ + const char *cfirst=chars; /* -> first character of decimal part */ + const char *last=NULL; /* -> last digit of decimal part */ + const char *c; /* work */ + Unit *up; /* .. */ + #if DECDPUN>1 + Int cut, out; /* .. */ + #endif + Int residue; /* rounding residue */ + uInt status=0; /* error code */ + + #if DECCHECK + if (decCheckOperands(DECUNRESU, DECUNUSED, DECUNUSED, set)) + return decNumberZero(dn); + #endif + + do { /* status & malloc protection */ + for (c=chars;; c++) { /* -> input character */ + if (*c>='0' && *c<='9') { /* test for Arabic digit */ + last=c; + d++; /* count of real digits */ + continue; /* still in decimal part */ + } + if (*c=='.' && dotchar==NULL) { /* first '.' */ + dotchar=c; /* record offset into decimal part */ + if (c==cfirst) cfirst++; /* first digit must follow */ + continue;} + if (c==chars) { /* first in string... */ + if (*c=='-') { /* valid - sign */ + cfirst++; + bits=DECNEG; + continue;} + if (*c=='+') { /* valid + sign */ + cfirst++; + continue;} + } + /* *c is not a digit, or a valid +, -, or '.' */ + break; + } /* c */ + + if (last==NULL) { /* no digits yet */ + status=DEC_Conversion_syntax;/* assume the worst */ + if (*c=='\0') break; /* and no more to come... */ + #if DECSUBSET + /* if subset then infinities and NaNs are not allowed */ + if (!set->extended) break; /* hopeless */ + #endif + /* Infinities and NaNs are possible, here */ + if (dotchar!=NULL) break; /* .. unless had a dot */ + decNumberZero(dn); /* be optimistic */ + if (decBiStr(c, "infinity", "INFINITY") + || decBiStr(c, "inf", "INF")) { + dn->bits=bits | DECINF; + status=0; /* is OK */ + break; /* all done */ + } + /* a NaN expected */ + /* 2003.09.10 NaNs are now permitted to have a sign */ + dn->bits=bits | DECNAN; /* assume simple NaN */ + if (*c=='s' || *c=='S') { /* looks like an sNaN */ + c++; + dn->bits=bits | DECSNAN; + } + if (*c!='n' && *c!='N') break; /* check caseless "NaN" */ + c++; + if (*c!='a' && *c!='A') break; /* .. */ + c++; + if (*c!='n' && *c!='N') break; /* .. */ + c++; + /* now either nothing, or nnnn payload, expected */ + /* -> start of integer and skip leading 0s [including plain 0] */ + for (cfirst=c; *cfirst=='0';) cfirst++; + if (*cfirst=='\0') { /* "NaN" or "sNaN", maybe with all 0s */ + status=0; /* it's good */ + break; /* .. */ + } + /* something other than 0s; setup last and d as usual [no dots] */ + for (c=cfirst;; c++, d++) { + if (*c<'0' || *c>'9') break; /* test for Arabic digit */ + last=c; + } + if (*c!='\0') break; /* not all digits */ + if (d>set->digits-1) { + /* [NB: payload in a decNumber can be full length unless */ + /* clamped, in which case can only be digits-1] */ + if (set->clamp) break; + if (d>set->digits) break; + } /* too many digits? */ + /* good; drop through to convert the integer to coefficient */ + status=0; /* syntax is OK */ + bits=dn->bits; /* for copy-back */ + } /* last==NULL */ + + else if (*c!='\0') { /* more to process... */ + /* had some digits; exponent is only valid sequence now */ + Flag nege; /* 1=negative exponent */ + const char *firstexp; /* -> first significant exponent digit */ + status=DEC_Conversion_syntax;/* assume the worst */ + if (*c!='e' && *c!='E') break; + /* Found 'e' or 'E' -- now process explicit exponent */ + /* 1998.07.11: sign no longer required */ + nege=0; + c++; /* to (possible) sign */ + if (*c=='-') {nege=1; c++;} + else if (*c=='+') c++; + if (*c=='\0') break; + + for (; *c=='0' && *(c+1)!='\0';) c++; /* strip insignificant zeros */ + firstexp=c; /* save exponent digit place */ + for (; ;c++) { + if (*c<'0' || *c>'9') break; /* not a digit */ + exponent=X10(exponent)+(Int)*c-(Int)'0'; + } /* c */ + /* if not now on a '\0', *c must not be a digit */ + if (*c!='\0') break; + + /* (this next test must be after the syntax checks) */ + /* if it was too long the exponent may have wrapped, so check */ + /* carefully and set it to a certain overflow if wrap possible */ + if (c>=firstexp+9+1) { + if (c>firstexp+9+1 || *firstexp>'1') exponent=DECNUMMAXE*2; + /* [up to 1999999999 is OK, for example 1E-1000000998] */ + } + if (nege) exponent=-exponent; /* was negative */ + status=0; /* is OK */ + } /* stuff after digits */ + + /* Here when whole string has been inspected; syntax is good */ + /* cfirst->first digit (never dot), last->last digit (ditto) */ + + /* strip leading zeros/dot [leave final 0 if all 0's] */ + if (*cfirst=='0') { /* [cfirst has stepped over .] */ + for (c=cfirst; c<last; c++, cfirst++) { + if (*c=='.') continue; /* ignore dots */ + if (*c!='0') break; /* non-zero found */ + d--; /* 0 stripped */ + } /* c */ + #if DECSUBSET + /* make a rapid exit for easy zeros if !extended */ + if (*cfirst=='0' && !set->extended) { + decNumberZero(dn); /* clean result */ + break; /* [could be return] */ + } + #endif + } /* at least one leading 0 */ + + /* Handle decimal point... */ + if (dotchar!=NULL && dotchar<last) /* non-trailing '.' found? */ + exponent-=(last-dotchar); /* adjust exponent */ + /* [we can now ignore the .] */ + + /* OK, the digits string is good. Assemble in the decNumber, or in */ + /* a temporary units array if rounding is needed */ + if (d<=set->digits) res=dn->lsu; /* fits into supplied decNumber */ + else { /* rounding needed */ + Int needbytes=D2U(d)*sizeof(Unit);/* bytes needed */ + res=resbuff; /* assume use local buffer */ + if (needbytes>(Int)sizeof(resbuff)) { /* too big for local */ + allocres=(Unit *)malloc(needbytes); + if (allocres==NULL) {status|=DEC_Insufficient_storage; break;} + res=allocres; + } + } + /* res now -> number lsu, buffer, or allocated storage for Unit array */ + + /* Place the coefficient into the selected Unit array */ + /* [this is often 70% of the cost of this function when DECDPUN>1] */ + #if DECDPUN>1 + out=0; /* accumulator */ + up=res+D2U(d)-1; /* -> msu */ + cut=d-(up-res)*DECDPUN; /* digits in top unit */ + for (c=cfirst;; c++) { /* along the digits */ + if (*c=='.') continue; /* ignore '.' [don't decrement cut] */ + out=X10(out)+(Int)*c-(Int)'0'; + if (c==last) break; /* done [never get to trailing '.'] */ + cut--; + if (cut>0) continue; /* more for this unit */ + *up=(Unit)out; /* write unit */ + up--; /* prepare for unit below.. */ + cut=DECDPUN; /* .. */ + out=0; /* .. */ + } /* c */ + *up=(Unit)out; /* write lsu */ + + #else + /* DECDPUN==1 */ + up=res; /* -> lsu */ + for (c=last; c>=cfirst; c--) { /* over each character, from least */ + if (*c=='.') continue; /* ignore . [don't step up] */ + *up=(Unit)((Int)*c-(Int)'0'); + up++; + } /* c */ + #endif + + dn->bits=bits; + dn->exponent=exponent; + dn->digits=d; + + /* if not in number (too long) shorten into the number */ + if (d>set->digits) { + residue=0; + decSetCoeff(dn, set, res, d, &residue, &status); + /* always check for overflow or subnormal and round as needed */ + decFinalize(dn, set, &residue, &status); + } + else { /* no rounding, but may still have overflow or subnormal */ + /* [these tests are just for performance; finalize repeats them] */ + if ((dn->exponent-1<set->emin-dn->digits) + || (dn->exponent-1>set->emax-set->digits)) { + residue=0; + decFinalize(dn, set, &residue, &status); + } + } + /* decNumberShow(dn); */ + } while(0); /* [for break] */ + + if (allocres!=NULL) free(allocres); /* drop any storage used */ + if (status!=0) decStatus(dn, status, set); + return dn; + } /* decNumberFromString */ + +/* ================================================================== */ +/* Operators */ +/* ================================================================== */ + +/* ------------------------------------------------------------------ */ +/* decNumberAbs -- absolute value operator */ +/* */ +/* This computes C = abs(A) */ +/* */ +/* res is C, the result. C may be A */ +/* rhs is A */ +/* set is the context */ +/* */ +/* See also decNumberCopyAbs for a quiet bitwise version of this. */ +/* C must have space for set->digits digits. */ +/* ------------------------------------------------------------------ */ +/* This has the same effect as decNumberPlus unless A is negative, */ +/* in which case it has the same effect as decNumberMinus. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberAbs(decNumber *res, const decNumber *rhs, + decContext *set) { + decNumber dzero; /* for 0 */ + uInt status=0; /* accumulator */ + + #if DECCHECK + if (decCheckOperands(res, DECUNUSED, rhs, set)) return res; + #endif + + decNumberZero(&dzero); /* set 0 */ + dzero.exponent=rhs->exponent; /* [no coefficient expansion] */ + decAddOp(res, &dzero, rhs, set, (uByte)(rhs->bits & DECNEG), &status); + if (status!=0) decStatus(res, status, set); + #if DECCHECK + decCheckInexact(res, set); + #endif + return res; + } /* decNumberAbs */ + +/* ------------------------------------------------------------------ */ +/* decNumberAdd -- add two Numbers */ +/* */ +/* This computes C = A + B */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X+X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* */ +/* C must have space for set->digits digits. */ +/* ------------------------------------------------------------------ */ +/* This just calls the routine shared with Subtract */ +decNumber * decNumberAdd(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + uInt status=0; /* accumulator */ + decAddOp(res, lhs, rhs, set, 0, &status); + if (status!=0) decStatus(res, status, set); + #if DECCHECK + decCheckInexact(res, set); + #endif + return res; + } /* decNumberAdd */ + +/* ------------------------------------------------------------------ */ +/* decNumberAnd -- AND two Numbers, digitwise */ +/* */ +/* This computes C = A & B */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X&X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context (used for result length and error report) */ +/* */ +/* C must have space for set->digits digits. */ +/* */ +/* Logical function restrictions apply (see above); a NaN is */ +/* returned with Invalid_operation if a restriction is violated. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberAnd(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + const Unit *ua, *ub; /* -> operands */ + const Unit *msua, *msub; /* -> operand msus */ + Unit *uc, *msuc; /* -> result and its msu */ + Int msudigs; /* digits in res msu */ + #if DECCHECK + if (decCheckOperands(res, lhs, rhs, set)) return res; + #endif + + if (lhs->exponent!=0 || decNumberIsSpecial(lhs) || decNumberIsNegative(lhs) + || rhs->exponent!=0 || decNumberIsSpecial(rhs) || decNumberIsNegative(rhs)) { + decStatus(res, DEC_Invalid_operation, set); + return res; + } + + /* operands are valid */ + ua=lhs->lsu; /* bottom-up */ + ub=rhs->lsu; /* .. */ + uc=res->lsu; /* .. */ + msua=ua+D2U(lhs->digits)-1; /* -> msu of lhs */ + msub=ub+D2U(rhs->digits)-1; /* -> msu of rhs */ + msuc=uc+D2U(set->digits)-1; /* -> msu of result */ + msudigs=MSUDIGITS(set->digits); /* [faster than remainder] */ + for (; uc<=msuc; ua++, ub++, uc++) { /* Unit loop */ + Unit a, b; /* extract units */ + if (ua>msua) a=0; + else a=*ua; + if (ub>msub) b=0; + else b=*ub; + *uc=0; /* can now write back */ + if (a|b) { /* maybe 1 bits to examine */ + Int i, j; + *uc=0; /* can now write back */ + /* This loop could be unrolled and/or use BIN2BCD tables */ + for (i=0; i<DECDPUN; i++) { + if (a&b&1) *uc=*uc+(Unit)powers[i]; /* effect AND */ + j=a%10; + a=a/10; + j|=b%10; + b=b/10; + if (j>1) { + decStatus(res, DEC_Invalid_operation, set); + return res; + } + if (uc==msuc && i==msudigs-1) break; /* just did final digit */ + } /* each digit */ + } /* both OK */ + } /* each unit */ + /* [here uc-1 is the msu of the result] */ + res->digits=decGetDigits(res->lsu, uc-res->lsu); + res->exponent=0; /* integer */ + res->bits=0; /* sign=0 */ + return res; /* [no status to set] */ + } /* decNumberAnd */ + +/* ------------------------------------------------------------------ */ +/* decNumberCompare -- compare two Numbers */ +/* */ +/* This computes C = A ? B */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X?X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* */ +/* C must have space for one digit (or NaN). */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberCompare(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + uInt status=0; /* accumulator */ + decCompareOp(res, lhs, rhs, set, COMPARE, &status); + if (status!=0) decStatus(res, status, set); + return res; + } /* decNumberCompare */ + +/* ------------------------------------------------------------------ */ +/* decNumberCompareSignal -- compare, signalling on all NaNs */ +/* */ +/* This computes C = A ? B */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X?X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* */ +/* C must have space for one digit (or NaN). */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberCompareSignal(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + uInt status=0; /* accumulator */ + decCompareOp(res, lhs, rhs, set, COMPSIG, &status); + if (status!=0) decStatus(res, status, set); + return res; + } /* decNumberCompareSignal */ + +/* ------------------------------------------------------------------ */ +/* decNumberCompareTotal -- compare two Numbers, using total ordering */ +/* */ +/* This computes C = A ? B, under total ordering */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X?X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* */ +/* C must have space for one digit; the result will always be one of */ +/* -1, 0, or 1. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberCompareTotal(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + uInt status=0; /* accumulator */ + decCompareOp(res, lhs, rhs, set, COMPTOTAL, &status); + if (status!=0) decStatus(res, status, set); + return res; + } /* decNumberCompareTotal */ + +/* ------------------------------------------------------------------ */ +/* decNumberCompareTotalMag -- compare, total ordering of magnitudes */ +/* */ +/* This computes C = |A| ? |B|, under total ordering */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X?X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* */ +/* C must have space for one digit; the result will always be one of */ +/* -1, 0, or 1. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberCompareTotalMag(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + uInt status=0; /* accumulator */ + uInt needbytes; /* for space calculations */ + decNumber bufa[D2N(DECBUFFER+1)];/* +1 in case DECBUFFER=0 */ + decNumber *allocbufa=NULL; /* -> allocated bufa, iff allocated */ + decNumber bufb[D2N(DECBUFFER+1)]; + decNumber *allocbufb=NULL; /* -> allocated bufb, iff allocated */ + decNumber *a, *b; /* temporary pointers */ + + #if DECCHECK + if (decCheckOperands(res, lhs, rhs, set)) return res; + #endif + + do { /* protect allocated storage */ + /* if either is negative, take a copy and absolute */ + if (decNumberIsNegative(lhs)) { /* lhs<0 */ + a=bufa; + needbytes=sizeof(decNumber)+(D2U(lhs->digits)-1)*sizeof(Unit); + if (needbytes>sizeof(bufa)) { /* need malloc space */ + allocbufa=(decNumber *)malloc(needbytes); + if (allocbufa==NULL) { /* hopeless -- abandon */ + status|=DEC_Insufficient_storage; + break;} + a=allocbufa; /* use the allocated space */ + } + decNumberCopy(a, lhs); /* copy content */ + a->bits&=~DECNEG; /* .. and clear the sign */ + lhs=a; /* use copy from here on */ + } + if (decNumberIsNegative(rhs)) { /* rhs<0 */ + b=bufb; + needbytes=sizeof(decNumber)+(D2U(rhs->digits)-1)*sizeof(Unit); + if (needbytes>sizeof(bufb)) { /* need malloc space */ + allocbufb=(decNumber *)malloc(needbytes); + if (allocbufb==NULL) { /* hopeless -- abandon */ + status|=DEC_Insufficient_storage; + break;} + b=allocbufb; /* use the allocated space */ + } + decNumberCopy(b, rhs); /* copy content */ + b->bits&=~DECNEG; /* .. and clear the sign */ + rhs=b; /* use copy from here on */ + } + decCompareOp(res, lhs, rhs, set, COMPTOTAL, &status); + } while(0); /* end protected */ + + if (allocbufa!=NULL) free(allocbufa); /* drop any storage used */ + if (allocbufb!=NULL) free(allocbufb); /* .. */ + if (status!=0) decStatus(res, status, set); + return res; + } /* decNumberCompareTotalMag */ + +/* ------------------------------------------------------------------ */ +/* decNumberDivide -- divide one number by another */ +/* */ +/* This computes C = A / B */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X/X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* */ +/* C must have space for set->digits digits. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberDivide(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + uInt status=0; /* accumulator */ + decDivideOp(res, lhs, rhs, set, DIVIDE, &status); + if (status!=0) decStatus(res, status, set); + #if DECCHECK + decCheckInexact(res, set); + #endif + return res; + } /* decNumberDivide */ + +/* ------------------------------------------------------------------ */ +/* decNumberDivideInteger -- divide and return integer quotient */ +/* */ +/* This computes C = A # B, where # is the integer divide operator */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X#X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* */ +/* C must have space for set->digits digits. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberDivideInteger(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + uInt status=0; /* accumulator */ + decDivideOp(res, lhs, rhs, set, DIVIDEINT, &status); + if (status!=0) decStatus(res, status, set); + return res; + } /* decNumberDivideInteger */ + +/* ------------------------------------------------------------------ */ +/* decNumberExp -- exponentiation */ +/* */ +/* This computes C = exp(A) */ +/* */ +/* res is C, the result. C may be A */ +/* rhs is A */ +/* set is the context; note that rounding mode has no effect */ +/* */ +/* C must have space for set->digits digits. */ +/* */ +/* Mathematical function restrictions apply (see above); a NaN is */ +/* returned with Invalid_operation if a restriction is violated. */ +/* */ +/* Finite results will always be full precision and Inexact, except */ +/* when A is a zero or -Infinity (giving 1 or 0 respectively). */ +/* */ +/* An Inexact result is rounded using DEC_ROUND_HALF_EVEN; it will */ +/* almost always be correctly rounded, but may be up to 1 ulp in */ +/* error in rare cases. */ +/* ------------------------------------------------------------------ */ +/* This is a wrapper for decExpOp which can handle the slightly wider */ +/* (double) range needed by Ln (which has to be able to calculate */ +/* exp(-a) where a can be the tiniest number (Ntiny). */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberExp(decNumber *res, const decNumber *rhs, + decContext *set) { + uInt status=0; /* accumulator */ + #if DECSUBSET + decNumber *allocrhs=NULL; /* non-NULL if rounded rhs allocated */ + #endif + + #if DECCHECK + if (decCheckOperands(res, DECUNUSED, rhs, set)) return res; + #endif + + /* Check restrictions; these restrictions ensure that if h=8 (see */ + /* decExpOp) then the result will either overflow or underflow to 0. */ + /* Other math functions restrict the input range, too, for inverses. */ + /* If not violated then carry out the operation. */ + if (!decCheckMath(rhs, set, &status)) do { /* protect allocation */ + #if DECSUBSET + if (!set->extended) { + /* reduce operand and set lostDigits status, as needed */ + if (rhs->digits>set->digits) { + allocrhs=decRoundOperand(rhs, set, &status); + if (allocrhs==NULL) break; + rhs=allocrhs; + } + } + #endif + decExpOp(res, rhs, set, &status); + } while(0); /* end protected */ + + #if DECSUBSET + if (allocrhs !=NULL) free(allocrhs); /* drop any storage used */ + #endif + /* apply significant status */ + if (status!=0) decStatus(res, status, set); + #if DECCHECK + decCheckInexact(res, set); + #endif + return res; + } /* decNumberExp */ + +/* ------------------------------------------------------------------ */ +/* decNumberFMA -- fused multiply add */ +/* */ +/* This computes D = (A * B) + C with only one rounding */ +/* */ +/* res is D, the result. D may be A or B or C (e.g., X=FMA(X,X,X)) */ +/* lhs is A */ +/* rhs is B */ +/* fhs is C [far hand side] */ +/* set is the context */ +/* */ +/* Mathematical function restrictions apply (see above); a NaN is */ +/* returned with Invalid_operation if a restriction is violated. */ +/* */ +/* C must have space for set->digits digits. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberFMA(decNumber *res, const decNumber *lhs, + const decNumber *rhs, const decNumber *fhs, + decContext *set) { + uInt status=0; /* accumulator */ + decContext dcmul; /* context for the multiplication */ + uInt needbytes; /* for space calculations */ + decNumber bufa[D2N(DECBUFFER*2+1)]; + decNumber *allocbufa=NULL; /* -> allocated bufa, iff allocated */ + decNumber *acc; /* accumulator pointer */ + decNumber dzero; /* work */ + + #if DECCHECK + if (decCheckOperands(res, lhs, rhs, set)) return res; + if (decCheckOperands(res, fhs, DECUNUSED, set)) return res; + #endif + + do { /* protect allocated storage */ + #if DECSUBSET + if (!set->extended) { /* [undefined if subset] */ + status|=DEC_Invalid_operation; + break;} + #endif + /* Check math restrictions [these ensure no overflow or underflow] */ + if ((!decNumberIsSpecial(lhs) && decCheckMath(lhs, set, &status)) + || (!decNumberIsSpecial(rhs) && decCheckMath(rhs, set, &status)) + || (!decNumberIsSpecial(fhs) && decCheckMath(fhs, set, &status))) break; + /* set up context for multiply */ + dcmul=*set; + dcmul.digits=lhs->digits+rhs->digits; /* just enough */ + /* [The above may be an over-estimate for subset arithmetic, but that's OK] */ + dcmul.emax=DEC_MAX_EMAX; /* effectively unbounded .. */ + dcmul.emin=DEC_MIN_EMIN; /* [thanks to Math restrictions] */ + /* set up decNumber space to receive the result of the multiply */ + acc=bufa; /* may fit */ + needbytes=sizeof(decNumber)+(D2U(dcmul.digits)-1)*sizeof(Unit); + if (needbytes>sizeof(bufa)) { /* need malloc space */ + allocbufa=(decNumber *)malloc(needbytes); + if (allocbufa==NULL) { /* hopeless -- abandon */ + status|=DEC_Insufficient_storage; + break;} + acc=allocbufa; /* use the allocated space */ + } + /* multiply with extended range and necessary precision */ + /*printf("emin=%ld\n", dcmul.emin); */ + decMultiplyOp(acc, lhs, rhs, &dcmul, &status); + /* Only Invalid operation (from sNaN or Inf * 0) is possible in */ + /* status; if either is seen than ignore fhs (in case it is */ + /* another sNaN) and set acc to NaN unless we had an sNaN */ + /* [decMultiplyOp leaves that to caller] */ + /* Note sNaN has to go through addOp to shorten payload if */ + /* necessary */ + if ((status&DEC_Invalid_operation)!=0) { + if (!(status&DEC_sNaN)) { /* but be true invalid */ + decNumberZero(res); /* acc not yet set */ + res->bits=DECNAN; + break; + } + decNumberZero(&dzero); /* make 0 (any non-NaN would do) */ + fhs=&dzero; /* use that */ + } + #if DECCHECK + else { /* multiply was OK */ + if (status!=0) printf("Status=%08lx after FMA multiply\n", status); + } + #endif + /* add the third operand and result -> res, and all is done */ + decAddOp(res, acc, fhs, set, 0, &status); + } while(0); /* end protected */ + + if (allocbufa!=NULL) free(allocbufa); /* drop any storage used */ + if (status!=0) decStatus(res, status, set); + #if DECCHECK + decCheckInexact(res, set); + #endif + return res; + } /* decNumberFMA */ + +/* ------------------------------------------------------------------ */ +/* decNumberInvert -- invert a Number, digitwise */ +/* */ +/* This computes C = ~A */ +/* */ +/* res is C, the result. C may be A (e.g., X=~X) */ +/* rhs is A */ +/* set is the context (used for result length and error report) */ +/* */ +/* C must have space for set->digits digits. */ +/* */ +/* Logical function restrictions apply (see above); a NaN is */ +/* returned with Invalid_operation if a restriction is violated. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberInvert(decNumber *res, const decNumber *rhs, + decContext *set) { + const Unit *ua, *msua; /* -> operand and its msu */ + Unit *uc, *msuc; /* -> result and its msu */ + Int msudigs; /* digits in res msu */ + #if DECCHECK + if (decCheckOperands(res, DECUNUSED, rhs, set)) return res; + #endif + + if (rhs->exponent!=0 || decNumberIsSpecial(rhs) || decNumberIsNegative(rhs)) { + decStatus(res, DEC_Invalid_operation, set); + return res; + } + /* operand is valid */ + ua=rhs->lsu; /* bottom-up */ + uc=res->lsu; /* .. */ + msua=ua+D2U(rhs->digits)-1; /* -> msu of rhs */ + msuc=uc+D2U(set->digits)-1; /* -> msu of result */ + msudigs=MSUDIGITS(set->digits); /* [faster than remainder] */ + for (; uc<=msuc; ua++, uc++) { /* Unit loop */ + Unit a; /* extract unit */ + Int i, j; /* work */ + if (ua>msua) a=0; + else a=*ua; + *uc=0; /* can now write back */ + /* always need to examine all bits in rhs */ + /* This loop could be unrolled and/or use BIN2BCD tables */ + for (i=0; i<DECDPUN; i++) { + if ((~a)&1) *uc=*uc+(Unit)powers[i]; /* effect INVERT */ + j=a%10; + a=a/10; + if (j>1) { + decStatus(res, DEC_Invalid_operation, set); + return res; + } + if (uc==msuc && i==msudigs-1) break; /* just did final digit */ + } /* each digit */ + } /* each unit */ + /* [here uc-1 is the msu of the result] */ + res->digits=decGetDigits(res->lsu, uc-res->lsu); + res->exponent=0; /* integer */ + res->bits=0; /* sign=0 */ + return res; /* [no status to set] */ + } /* decNumberInvert */ + +/* ------------------------------------------------------------------ */ +/* decNumberLn -- natural logarithm */ +/* */ +/* This computes C = ln(A) */ +/* */ +/* res is C, the result. C may be A */ +/* rhs is A */ +/* set is the context; note that rounding mode has no effect */ +/* */ +/* C must have space for set->digits digits. */ +/* */ +/* Notable cases: */ +/* A<0 -> Invalid */ +/* A=0 -> -Infinity (Exact) */ +/* A=+Infinity -> +Infinity (Exact) */ +/* A=1 exactly -> 0 (Exact) */ +/* */ +/* Mathematical function restrictions apply (see above); a NaN is */ +/* returned with Invalid_operation if a restriction is violated. */ +/* */ +/* An Inexact result is rounded using DEC_ROUND_HALF_EVEN; it will */ +/* almost always be correctly rounded, but may be up to 1 ulp in */ +/* error in rare cases. */ +/* ------------------------------------------------------------------ */ +/* This is a wrapper for decLnOp which can handle the slightly wider */ +/* (+11) range needed by Ln, Log10, etc. (which may have to be able */ +/* to calculate at p+e+2). */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberLn(decNumber *res, const decNumber *rhs, + decContext *set) { + uInt status=0; /* accumulator */ + #if DECSUBSET + decNumber *allocrhs=NULL; /* non-NULL if rounded rhs allocated */ + #endif + + #if DECCHECK + if (decCheckOperands(res, DECUNUSED, rhs, set)) return res; + #endif + + /* Check restrictions; this is a math function; if not violated */ + /* then carry out the operation. */ + if (!decCheckMath(rhs, set, &status)) do { /* protect allocation */ + #if DECSUBSET + if (!set->extended) { + /* reduce operand and set lostDigits status, as needed */ + if (rhs->digits>set->digits) { + allocrhs=decRoundOperand(rhs, set, &status); + if (allocrhs==NULL) break; + rhs=allocrhs; + } + /* special check in subset for rhs=0 */ + if (ISZERO(rhs)) { /* +/- zeros -> error */ + status|=DEC_Invalid_operation; + break;} + } /* extended=0 */ + #endif + decLnOp(res, rhs, set, &status); + } while(0); /* end protected */ + + #if DECSUBSET + if (allocrhs !=NULL) free(allocrhs); /* drop any storage used */ + #endif + /* apply significant status */ + if (status!=0) decStatus(res, status, set); + #if DECCHECK + decCheckInexact(res, set); + #endif + return res; + } /* decNumberLn */ + +/* ------------------------------------------------------------------ */ +/* decNumberLogB - get adjusted exponent, by 754r rules */ +/* */ +/* This computes C = adjustedexponent(A) */ +/* */ +/* res is C, the result. C may be A */ +/* rhs is A */ +/* set is the context, used only for digits and status */ +/* */ +/* C must have space for 10 digits (A might have 10**9 digits and */ +/* an exponent of +999999999, or one digit and an exponent of */ +/* -1999999999). */ +/* */ +/* This returns the adjusted exponent of A after (in theory) padding */ +/* with zeros on the right to set->digits digits while keeping the */ +/* same value. The exponent is not limited by emin/emax. */ +/* */ +/* Notable cases: */ +/* A<0 -> Use |A| */ +/* A=0 -> -Infinity (Division by zero) */ +/* A=Infinite -> +Infinity (Exact) */ +/* A=1 exactly -> 0 (Exact) */ +/* NaNs are propagated as usual */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberLogB(decNumber *res, const decNumber *rhs, + decContext *set) { + uInt status=0; /* accumulator */ + + #if DECCHECK + if (decCheckOperands(res, DECUNUSED, rhs, set)) return res; + #endif + + /* NaNs as usual; Infinities return +Infinity; 0->oops */ + if (decNumberIsNaN(rhs)) decNaNs(res, rhs, NULL, set, &status); + else if (decNumberIsInfinite(rhs)) decNumberCopyAbs(res, rhs); + else if (decNumberIsZero(rhs)) { + decNumberZero(res); /* prepare for Infinity */ + res->bits=DECNEG|DECINF; /* -Infinity */ + status|=DEC_Division_by_zero; /* as per 754r */ + } + else { /* finite non-zero */ + Int ae=rhs->exponent+rhs->digits-1; /* adjusted exponent */ + decNumberFromInt32(res, ae); /* lay it out */ + } + + if (status!=0) decStatus(res, status, set); + return res; + } /* decNumberLogB */ + +/* ------------------------------------------------------------------ */ +/* decNumberLog10 -- logarithm in base 10 */ +/* */ +/* This computes C = log10(A) */ +/* */ +/* res is C, the result. C may be A */ +/* rhs is A */ +/* set is the context; note that rounding mode has no effect */ +/* */ +/* C must have space for set->digits digits. */ +/* */ +/* Notable cases: */ +/* A<0 -> Invalid */ +/* A=0 -> -Infinity (Exact) */ +/* A=+Infinity -> +Infinity (Exact) */ +/* A=10**n (if n is an integer) -> n (Exact) */ +/* */ +/* Mathematical function restrictions apply (see above); a NaN is */ +/* returned with Invalid_operation if a restriction is violated. */ +/* */ +/* An Inexact result is rounded using DEC_ROUND_HALF_EVEN; it will */ +/* almost always be correctly rounded, but may be up to 1 ulp in */ +/* error in rare cases. */ +/* ------------------------------------------------------------------ */ +/* This calculates ln(A)/ln(10) using appropriate precision. For */ +/* ln(A) this is the max(p, rhs->digits + t) + 3, where p is the */ +/* requested digits and t is the number of digits in the exponent */ +/* (maximum 6). For ln(10) it is p + 3; this is often handled by the */ +/* fastpath in decLnOp. The final division is done to the requested */ +/* precision. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberLog10(decNumber *res, const decNumber *rhs, + decContext *set) { + uInt status=0, ignore=0; /* status accumulators */ + uInt needbytes; /* for space calculations */ + Int p; /* working precision */ + Int t; /* digits in exponent of A */ + + /* buffers for a and b working decimals */ + /* (adjustment calculator, same size) */ + decNumber bufa[D2N(DECBUFFER+2)]; + decNumber *allocbufa=NULL; /* -> allocated bufa, iff allocated */ + decNumber *a=bufa; /* temporary a */ + decNumber bufb[D2N(DECBUFFER+2)]; + decNumber *allocbufb=NULL; /* -> allocated bufb, iff allocated */ + decNumber *b=bufb; /* temporary b */ + decNumber bufw[D2N(10)]; /* working 2-10 digit number */ + decNumber *w=bufw; /* .. */ + #if DECSUBSET + decNumber *allocrhs=NULL; /* non-NULL if rounded rhs allocated */ + #endif + + decContext aset; /* working context */ + + #if DECCHECK + if (decCheckOperands(res, DECUNUSED, rhs, set)) return res; + #endif + + /* Check restrictions; this is a math function; if not violated */ + /* then carry out the operation. */ + if (!decCheckMath(rhs, set, &status)) do { /* protect malloc */ + #if DECSUBSET + if (!set->extended) { + /* reduce operand and set lostDigits status, as needed */ + if (rhs->digits>set->digits) { + allocrhs=decRoundOperand(rhs, set, &status); + if (allocrhs==NULL) break; + rhs=allocrhs; + } + /* special check in subset for rhs=0 */ + if (ISZERO(rhs)) { /* +/- zeros -> error */ + status|=DEC_Invalid_operation; + break;} + } /* extended=0 */ + #endif + + decContextDefault(&aset, DEC_INIT_DECIMAL64); /* clean context */ + + /* handle exact powers of 10; only check if +ve finite */ + if (!(rhs->bits&(DECNEG|DECSPECIAL)) && !ISZERO(rhs)) { + Int residue=0; /* (no residue) */ + uInt copystat=0; /* clean status */ + + /* round to a single digit... */ + aset.digits=1; + decCopyFit(w, rhs, &aset, &residue, ©stat); /* copy & shorten */ + /* if exact and the digit is 1, rhs is a power of 10 */ + if (!(copystat&DEC_Inexact) && w->lsu[0]==1) { + /* the exponent, conveniently, is the power of 10; making */ + /* this the result needs a little care as it might not fit, */ + /* so first convert it into the working number, and then move */ + /* to res */ + decNumberFromInt32(w, w->exponent); + residue=0; + decCopyFit(res, w, set, &residue, &status); /* copy & round */ + decFinish(res, set, &residue, &status); /* cleanup/set flags */ + break; + } /* not a power of 10 */ + } /* not a candidate for exact */ + + /* simplify the information-content calculation to use 'total */ + /* number of digits in a, including exponent' as compared to the */ + /* requested digits, as increasing this will only rarely cost an */ + /* iteration in ln(a) anyway */ + t=6; /* it can never be >6 */ + + /* allocate space when needed... */ + p=(rhs->digits+t>set->digits?rhs->digits+t:set->digits)+3; + needbytes=sizeof(decNumber)+(D2U(p)-1)*sizeof(Unit); + if (needbytes>sizeof(bufa)) { /* need malloc space */ + allocbufa=(decNumber *)malloc(needbytes); + if (allocbufa==NULL) { /* hopeless -- abandon */ + status|=DEC_Insufficient_storage; + break;} + a=allocbufa; /* use the allocated space */ + } + aset.digits=p; /* as calculated */ + aset.emax=DEC_MAX_MATH; /* usual bounds */ + aset.emin=-DEC_MAX_MATH; /* .. */ + aset.clamp=0; /* and no concrete format */ + decLnOp(a, rhs, &aset, &status); /* a=ln(rhs) */ + + /* skip the division if the result so far is infinite, NaN, or */ + /* zero, or there was an error; note NaN from sNaN needs copy */ + if (status&DEC_NaNs && !(status&DEC_sNaN)) break; + if (a->bits&DECSPECIAL || ISZERO(a)) { + decNumberCopy(res, a); /* [will fit] */ + break;} + + /* for ln(10) an extra 3 digits of precision are needed */ + p=set->digits+3; + needbytes=sizeof(decNumber)+(D2U(p)-1)*sizeof(Unit); + if (needbytes>sizeof(bufb)) { /* need malloc space */ + allocbufb=(decNumber *)malloc(needbytes); + if (allocbufb==NULL) { /* hopeless -- abandon */ + status|=DEC_Insufficient_storage; + break;} + b=allocbufb; /* use the allocated space */ + } + decNumberZero(w); /* set up 10... */ + #if DECDPUN==1 + w->lsu[1]=1; w->lsu[0]=0; /* .. */ + #else + w->lsu[0]=10; /* .. */ + #endif + w->digits=2; /* .. */ + + aset.digits=p; + decLnOp(b, w, &aset, &ignore); /* b=ln(10) */ + + aset.digits=set->digits; /* for final divide */ + decDivideOp(res, a, b, &aset, DIVIDE, &status); /* into result */ + } while(0); /* [for break] */ + + if (allocbufa!=NULL) free(allocbufa); /* drop any storage used */ + if (allocbufb!=NULL) free(allocbufb); /* .. */ + #if DECSUBSET + if (allocrhs !=NULL) free(allocrhs); /* .. */ + #endif + /* apply significant status */ + if (status!=0) decStatus(res, status, set); + #if DECCHECK + decCheckInexact(res, set); + #endif + return res; + } /* decNumberLog10 */ + +/* ------------------------------------------------------------------ */ +/* decNumberMax -- compare two Numbers and return the maximum */ +/* */ +/* This computes C = A ? B, returning the maximum by 754R rules */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X?X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* */ +/* C must have space for set->digits digits. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberMax(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + uInt status=0; /* accumulator */ + decCompareOp(res, lhs, rhs, set, COMPMAX, &status); + if (status!=0) decStatus(res, status, set); + #if DECCHECK + decCheckInexact(res, set); + #endif + return res; + } /* decNumberMax */ + +/* ------------------------------------------------------------------ */ +/* decNumberMaxMag -- compare and return the maximum by magnitude */ +/* */ +/* This computes C = A ? B, returning the maximum by 754R rules */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X?X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* */ +/* C must have space for set->digits digits. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberMaxMag(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + uInt status=0; /* accumulator */ + decCompareOp(res, lhs, rhs, set, COMPMAXMAG, &status); + if (status!=0) decStatus(res, status, set); + #if DECCHECK + decCheckInexact(res, set); + #endif + return res; + } /* decNumberMaxMag */ + +/* ------------------------------------------------------------------ */ +/* decNumberMin -- compare two Numbers and return the minimum */ +/* */ +/* This computes C = A ? B, returning the minimum by 754R rules */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X?X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* */ +/* C must have space for set->digits digits. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberMin(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + uInt status=0; /* accumulator */ + decCompareOp(res, lhs, rhs, set, COMPMIN, &status); + if (status!=0) decStatus(res, status, set); + #if DECCHECK + decCheckInexact(res, set); + #endif + return res; + } /* decNumberMin */ + +/* ------------------------------------------------------------------ */ +/* decNumberMinMag -- compare and return the minimum by magnitude */ +/* */ +/* This computes C = A ? B, returning the minimum by 754R rules */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X?X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* */ +/* C must have space for set->digits digits. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberMinMag(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + uInt status=0; /* accumulator */ + decCompareOp(res, lhs, rhs, set, COMPMINMAG, &status); + if (status!=0) decStatus(res, status, set); + #if DECCHECK + decCheckInexact(res, set); + #endif + return res; + } /* decNumberMinMag */ + +/* ------------------------------------------------------------------ */ +/* decNumberMinus -- prefix minus operator */ +/* */ +/* This computes C = 0 - A */ +/* */ +/* res is C, the result. C may be A */ +/* rhs is A */ +/* set is the context */ +/* */ +/* See also decNumberCopyNegate for a quiet bitwise version of this. */ +/* C must have space for set->digits digits. */ +/* ------------------------------------------------------------------ */ +/* Simply use AddOp for the subtract, which will do the necessary. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberMinus(decNumber *res, const decNumber *rhs, + decContext *set) { + decNumber dzero; + uInt status=0; /* accumulator */ + + #if DECCHECK + if (decCheckOperands(res, DECUNUSED, rhs, set)) return res; + #endif + + decNumberZero(&dzero); /* make 0 */ + dzero.exponent=rhs->exponent; /* [no coefficient expansion] */ + decAddOp(res, &dzero, rhs, set, DECNEG, &status); + if (status!=0) decStatus(res, status, set); + #if DECCHECK + decCheckInexact(res, set); + #endif + return res; + } /* decNumberMinus */ + +/* ------------------------------------------------------------------ */ +/* decNumberNextMinus -- next towards -Infinity */ +/* */ +/* This computes C = A - infinitesimal, rounded towards -Infinity */ +/* */ +/* res is C, the result. C may be A */ +/* rhs is A */ +/* set is the context */ +/* */ +/* This is a generalization of 754r NextDown. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberNextMinus(decNumber *res, const decNumber *rhs, + decContext *set) { + decNumber dtiny; /* constant */ + decContext workset=*set; /* work */ + uInt status=0; /* accumulator */ + #if DECCHECK + if (decCheckOperands(res, DECUNUSED, rhs, set)) return res; + #endif + + /* +Infinity is the special case */ + if ((rhs->bits&(DECINF|DECNEG))==DECINF) { + decSetMaxValue(res, set); /* is +ve */ + /* there is no status to set */ + return res; + } + decNumberZero(&dtiny); /* start with 0 */ + dtiny.lsu[0]=1; /* make number that is .. */ + dtiny.exponent=DEC_MIN_EMIN-1; /* .. smaller than tiniest */ + workset.round=DEC_ROUND_FLOOR; + decAddOp(res, rhs, &dtiny, &workset, DECNEG, &status); + status&=DEC_Invalid_operation|DEC_sNaN; /* only sNaN Invalid please */ + if (status!=0) decStatus(res, status, set); + return res; + } /* decNumberNextMinus */ + +/* ------------------------------------------------------------------ */ +/* decNumberNextPlus -- next towards +Infinity */ +/* */ +/* This computes C = A + infinitesimal, rounded towards +Infinity */ +/* */ +/* res is C, the result. C may be A */ +/* rhs is A */ +/* set is the context */ +/* */ +/* This is a generalization of 754r NextUp. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberNextPlus(decNumber *res, const decNumber *rhs, + decContext *set) { + decNumber dtiny; /* constant */ + decContext workset=*set; /* work */ + uInt status=0; /* accumulator */ + #if DECCHECK + if (decCheckOperands(res, DECUNUSED, rhs, set)) return res; + #endif + + /* -Infinity is the special case */ + if ((rhs->bits&(DECINF|DECNEG))==(DECINF|DECNEG)) { + decSetMaxValue(res, set); + res->bits=DECNEG; /* negative */ + /* there is no status to set */ + return res; + } + decNumberZero(&dtiny); /* start with 0 */ + dtiny.lsu[0]=1; /* make number that is .. */ + dtiny.exponent=DEC_MIN_EMIN-1; /* .. smaller than tiniest */ + workset.round=DEC_ROUND_CEILING; + decAddOp(res, rhs, &dtiny, &workset, 0, &status); + status&=DEC_Invalid_operation|DEC_sNaN; /* only sNaN Invalid please */ + if (status!=0) decStatus(res, status, set); + return res; + } /* decNumberNextPlus */ + +/* ------------------------------------------------------------------ */ +/* decNumberNextToward -- next towards rhs */ +/* */ +/* This computes C = A +/- infinitesimal, rounded towards */ +/* +/-Infinity in the direction of B, as per 754r nextafter rules */ +/* */ +/* res is C, the result. C may be A or B. */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* */ +/* This is a generalization of 754r NextAfter. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberNextToward(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + decNumber dtiny; /* constant */ + decContext workset=*set; /* work */ + Int result; /* .. */ + uInt status=0; /* accumulator */ + #if DECCHECK + if (decCheckOperands(res, lhs, rhs, set)) return res; + #endif + + if (decNumberIsNaN(lhs) || decNumberIsNaN(rhs)) { + decNaNs(res, lhs, rhs, set, &status); + } + else { /* Is numeric, so no chance of sNaN Invalid, etc. */ + result=decCompare(lhs, rhs, 0); /* sign matters */ + if (result==BADINT) status|=DEC_Insufficient_storage; /* rare */ + else { /* valid compare */ + if (result==0) decNumberCopySign(res, lhs, rhs); /* easy */ + else { /* differ: need NextPlus or NextMinus */ + uByte sub; /* add or subtract */ + if (result<0) { /* lhs<rhs, do nextplus */ + /* -Infinity is the special case */ + if ((lhs->bits&(DECINF|DECNEG))==(DECINF|DECNEG)) { + decSetMaxValue(res, set); + res->bits=DECNEG; /* negative */ + return res; /* there is no status to set */ + } + workset.round=DEC_ROUND_CEILING; + sub=0; /* add, please */ + } /* plus */ + else { /* lhs>rhs, do nextminus */ + /* +Infinity is the special case */ + if ((lhs->bits&(DECINF|DECNEG))==DECINF) { + decSetMaxValue(res, set); + return res; /* there is no status to set */ + } + workset.round=DEC_ROUND_FLOOR; + sub=DECNEG; /* subtract, please */ + } /* minus */ + decNumberZero(&dtiny); /* start with 0 */ + dtiny.lsu[0]=1; /* make number that is .. */ + dtiny.exponent=DEC_MIN_EMIN-1; /* .. smaller than tiniest */ + decAddOp(res, lhs, &dtiny, &workset, sub, &status); /* + or - */ + /* turn off exceptions if the result is a normal number */ + /* (including Nmin), otherwise let all status through */ + if (decNumberIsNormal(res, set)) status=0; + } /* unequal */ + } /* compare OK */ + } /* numeric */ + if (status!=0) decStatus(res, status, set); + return res; + } /* decNumberNextToward */ + +/* ------------------------------------------------------------------ */ +/* decNumberOr -- OR two Numbers, digitwise */ +/* */ +/* This computes C = A | B */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X|X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context (used for result length and error report) */ +/* */ +/* C must have space for set->digits digits. */ +/* */ +/* Logical function restrictions apply (see above); a NaN is */ +/* returned with Invalid_operation if a restriction is violated. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberOr(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + const Unit *ua, *ub; /* -> operands */ + const Unit *msua, *msub; /* -> operand msus */ + Unit *uc, *msuc; /* -> result and its msu */ + Int msudigs; /* digits in res msu */ + #if DECCHECK + if (decCheckOperands(res, lhs, rhs, set)) return res; + #endif + + if (lhs->exponent!=0 || decNumberIsSpecial(lhs) || decNumberIsNegative(lhs) + || rhs->exponent!=0 || decNumberIsSpecial(rhs) || decNumberIsNegative(rhs)) { + decStatus(res, DEC_Invalid_operation, set); + return res; + } + /* operands are valid */ + ua=lhs->lsu; /* bottom-up */ + ub=rhs->lsu; /* .. */ + uc=res->lsu; /* .. */ + msua=ua+D2U(lhs->digits)-1; /* -> msu of lhs */ + msub=ub+D2U(rhs->digits)-1; /* -> msu of rhs */ + msuc=uc+D2U(set->digits)-1; /* -> msu of result */ + msudigs=MSUDIGITS(set->digits); /* [faster than remainder] */ + for (; uc<=msuc; ua++, ub++, uc++) { /* Unit loop */ + Unit a, b; /* extract units */ + if (ua>msua) a=0; + else a=*ua; + if (ub>msub) b=0; + else b=*ub; + *uc=0; /* can now write back */ + if (a|b) { /* maybe 1 bits to examine */ + Int i, j; + /* This loop could be unrolled and/or use BIN2BCD tables */ + for (i=0; i<DECDPUN; i++) { + if ((a|b)&1) *uc=*uc+(Unit)powers[i]; /* effect OR */ + j=a%10; + a=a/10; + j|=b%10; + b=b/10; + if (j>1) { + decStatus(res, DEC_Invalid_operation, set); + return res; + } + if (uc==msuc && i==msudigs-1) break; /* just did final digit */ + } /* each digit */ + } /* non-zero */ + } /* each unit */ + /* [here uc-1 is the msu of the result] */ + res->digits=decGetDigits(res->lsu, uc-res->lsu); + res->exponent=0; /* integer */ + res->bits=0; /* sign=0 */ + return res; /* [no status to set] */ + } /* decNumberOr */ + +/* ------------------------------------------------------------------ */ +/* decNumberPlus -- prefix plus operator */ +/* */ +/* This computes C = 0 + A */ +/* */ +/* res is C, the result. C may be A */ +/* rhs is A */ +/* set is the context */ +/* */ +/* See also decNumberCopy for a quiet bitwise version of this. */ +/* C must have space for set->digits digits. */ +/* ------------------------------------------------------------------ */ +/* This simply uses AddOp; Add will take fast path after preparing A. */ +/* Performance is a concern here, as this routine is often used to */ +/* check operands and apply rounding and overflow/underflow testing. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberPlus(decNumber *res, const decNumber *rhs, + decContext *set) { + decNumber dzero; + uInt status=0; /* accumulator */ + #if DECCHECK + if (decCheckOperands(res, DECUNUSED, rhs, set)) return res; + #endif + + decNumberZero(&dzero); /* make 0 */ + dzero.exponent=rhs->exponent; /* [no coefficient expansion] */ + decAddOp(res, &dzero, rhs, set, 0, &status); + if (status!=0) decStatus(res, status, set); + #if DECCHECK + decCheckInexact(res, set); + #endif + return res; + } /* decNumberPlus */ + +/* ------------------------------------------------------------------ */ +/* decNumberMultiply -- multiply two Numbers */ +/* */ +/* This computes C = A x B */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X+X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* */ +/* C must have space for set->digits digits. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberMultiply(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + uInt status=0; /* accumulator */ + decMultiplyOp(res, lhs, rhs, set, &status); + if (status!=0) decStatus(res, status, set); + #if DECCHECK + decCheckInexact(res, set); + #endif + return res; + } /* decNumberMultiply */ + +/* ------------------------------------------------------------------ */ +/* decNumberPower -- raise a number to a power */ +/* */ +/* This computes C = A ** B */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X**X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* */ +/* C must have space for set->digits digits. */ +/* */ +/* Mathematical function restrictions apply (see above); a NaN is */ +/* returned with Invalid_operation if a restriction is violated. */ +/* */ +/* However, if 1999999997<=B<=999999999 and B is an integer then the */ +/* restrictions on A and the context are relaxed to the usual bounds, */ +/* for compatibility with the earlier (integer power only) version */ +/* of this function. */ +/* */ +/* When B is an integer, the result may be exact, even if rounded. */ +/* */ +/* The final result is rounded according to the context; it will */ +/* almost always be correctly rounded, but may be up to 1 ulp in */ +/* error in rare cases. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberPower(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + #if DECSUBSET + decNumber *alloclhs=NULL; /* non-NULL if rounded lhs allocated */ + decNumber *allocrhs=NULL; /* .., rhs */ + #endif + decNumber *allocdac=NULL; /* -> allocated acc buffer, iff used */ + decNumber *allocinv=NULL; /* -> allocated 1/x buffer, iff used */ + Int reqdigits=set->digits; /* requested DIGITS */ + Int n; /* rhs in binary */ + Flag rhsint=0; /* 1 if rhs is an integer */ + Flag useint=0; /* 1 if can use integer calculation */ + Flag isoddint=0; /* 1 if rhs is an integer and odd */ + Int i; /* work */ + #if DECSUBSET + Int dropped; /* .. */ + #endif + uInt needbytes; /* buffer size needed */ + Flag seenbit; /* seen a bit while powering */ + Int residue=0; /* rounding residue */ + uInt status=0; /* accumulators */ + uByte bits=0; /* result sign if errors */ + decContext aset; /* working context */ + decNumber dnOne; /* work value 1... */ + /* local accumulator buffer [a decNumber, with digits+elength+1 digits] */ + decNumber dacbuff[D2N(DECBUFFER+9)]; + decNumber *dac=dacbuff; /* -> result accumulator */ + /* same again for possible 1/lhs calculation */ + decNumber invbuff[D2N(DECBUFFER+9)]; + + #if DECCHECK + if (decCheckOperands(res, lhs, rhs, set)) return res; + #endif + + do { /* protect allocated storage */ + #if DECSUBSET + if (!set->extended) { /* reduce operands and set status, as needed */ + if (lhs->digits>reqdigits) { + alloclhs=decRoundOperand(lhs, set, &status); + if (alloclhs==NULL) break; + lhs=alloclhs; + } + if (rhs->digits>reqdigits) { + allocrhs=decRoundOperand(rhs, set, &status); + if (allocrhs==NULL) break; + rhs=allocrhs; + } + } + #endif + /* [following code does not require input rounding] */ + + /* handle NaNs and rhs Infinity (lhs infinity is harder) */ + if (SPECIALARGS) { + if (decNumberIsNaN(lhs) || decNumberIsNaN(rhs)) { /* NaNs */ + decNaNs(res, lhs, rhs, set, &status); + break;} + if (decNumberIsInfinite(rhs)) { /* rhs Infinity */ + Flag rhsneg=rhs->bits&DECNEG; /* save rhs sign */ + if (decNumberIsNegative(lhs) /* lhs<0 */ + && !decNumberIsZero(lhs)) /* .. */ + status|=DEC_Invalid_operation; + else { /* lhs >=0 */ + decNumberZero(&dnOne); /* set up 1 */ + dnOne.lsu[0]=1; + decNumberCompare(dac, lhs, &dnOne, set); /* lhs ? 1 */ + decNumberZero(res); /* prepare for 0/1/Infinity */ + if (decNumberIsNegative(dac)) { /* lhs<1 */ + if (rhsneg) res->bits|=DECINF; /* +Infinity [else is +0] */ + } + else if (dac->lsu[0]==0) { /* lhs=1 */ + /* 1**Infinity is inexact, so return fully-padded 1.0000 */ + Int shift=set->digits-1; + *res->lsu=1; /* was 0, make int 1 */ + res->digits=decShiftToMost(res->lsu, 1, shift); + res->exponent=-shift; /* make 1.0000... */ + status|=DEC_Inexact|DEC_Rounded; /* deemed inexact */ + } + else { /* lhs>1 */ + if (!rhsneg) res->bits|=DECINF; /* +Infinity [else is +0] */ + } + } /* lhs>=0 */ + break;} + /* [lhs infinity drops through] */ + } /* specials */ + + /* Original rhs may be an integer that fits and is in range */ + n=decGetInt(rhs); + if (n!=BADINT) { /* it is an integer */ + rhsint=1; /* record the fact for 1**n */ + isoddint=(Flag)n&1; /* [works even if big] */ + if (n!=BIGEVEN && n!=BIGODD) /* can use integer path? */ + useint=1; /* looks good */ + } + + if (decNumberIsNegative(lhs) /* -x .. */ + && isoddint) bits=DECNEG; /* .. to an odd power */ + + /* handle LHS infinity */ + if (decNumberIsInfinite(lhs)) { /* [NaNs already handled] */ + uByte rbits=rhs->bits; /* save */ + decNumberZero(res); /* prepare */ + if (n==0) *res->lsu=1; /* [-]Inf**0 => 1 */ + else { + /* -Inf**nonint -> error */ + if (!rhsint && decNumberIsNegative(lhs)) { + status|=DEC_Invalid_operation; /* -Inf**nonint is error */ + break;} + if (!(rbits & DECNEG)) bits|=DECINF; /* was not a **-n */ + /* [otherwise will be 0 or -0] */ + res->bits=bits; + } + break;} + + /* similarly handle LHS zero */ + if (decNumberIsZero(lhs)) { + if (n==0) { /* 0**0 => Error */ + #if DECSUBSET + if (!set->extended) { /* [unless subset] */ + decNumberZero(res); + *res->lsu=1; /* return 1 */ + break;} + #endif + status|=DEC_Invalid_operation; + } + else { /* 0**x */ + uByte rbits=rhs->bits; /* save */ + if (rbits & DECNEG) { /* was a 0**(-n) */ + #if DECSUBSET + if (!set->extended) { /* [bad if subset] */ + status|=DEC_Invalid_operation; + break;} + #endif + bits|=DECINF; + } + decNumberZero(res); /* prepare */ + /* [otherwise will be 0 or -0] */ + res->bits=bits; + } + break;} + + /* here both lhs and rhs are finite; rhs==0 is handled in the */ + /* integer path. Next handle the non-integer cases */ + if (!useint) { /* non-integral rhs */ + /* any -ve lhs is bad, as is either operand or context out of */ + /* bounds */ + if (decNumberIsNegative(lhs)) { + status|=DEC_Invalid_operation; + break;} + if (decCheckMath(lhs, set, &status) + || decCheckMath(rhs, set, &status)) break; /* variable status */ + + decContextDefault(&aset, DEC_INIT_DECIMAL64); /* clean context */ + aset.emax=DEC_MAX_MATH; /* usual bounds */ + aset.emin=-DEC_MAX_MATH; /* .. */ + aset.clamp=0; /* and no concrete format */ + + /* calculate the result using exp(ln(lhs)*rhs), which can */ + /* all be done into the accumulator, dac. The precision needed */ + /* is enough to contain the full information in the lhs (which */ + /* is the total digits, including exponent), or the requested */ + /* precision, if larger, + 4; 6 is used for the exponent */ + /* maximum length, and this is also used when it is shorter */ + /* than the requested digits as it greatly reduces the >0.5 ulp */ + /* cases at little cost (because Ln doubles digits each */ + /* iteration so a few extra digits rarely causes an extra */ + /* iteration) */ + aset.digits=MAXI(lhs->digits, set->digits)+6+4; + } /* non-integer rhs */ + + else { /* rhs is in-range integer */ + if (n==0) { /* x**0 = 1 */ + /* (0**0 was handled above) */ + decNumberZero(res); /* result=1 */ + *res->lsu=1; /* .. */ + break;} + /* rhs is a non-zero integer */ + if (n<0) n=-n; /* use abs(n) */ + + aset=*set; /* clone the context */ + aset.round=DEC_ROUND_HALF_EVEN; /* internally use balanced */ + /* calculate the working DIGITS */ + aset.digits=reqdigits+(rhs->digits+rhs->exponent)+2; + #if DECSUBSET + if (!set->extended) aset.digits--; /* use classic precision */ + #endif + /* it's an error if this is more than can be handled */ + if (aset.digits>DECNUMMAXP) {status|=DEC_Invalid_operation; break;} + } /* integer path */ + + /* aset.digits is the count of digits for the accumulator needed */ + /* if accumulator is too long for local storage, then allocate */ + needbytes=sizeof(decNumber)+(D2U(aset.digits)-1)*sizeof(Unit); + /* [needbytes also used below if 1/lhs needed] */ + if (needbytes>sizeof(dacbuff)) { + allocdac=(decNumber *)malloc(needbytes); + if (allocdac==NULL) { /* hopeless -- abandon */ + status|=DEC_Insufficient_storage; + break;} + dac=allocdac; /* use the allocated space */ + } + /* here, aset is set up and accumulator is ready for use */ + + if (!useint) { /* non-integral rhs */ + /* x ** y; special-case x=1 here as it will otherwise always */ + /* reduce to integer 1; decLnOp has a fastpath which detects */ + /* the case of x=1 */ + decLnOp(dac, lhs, &aset, &status); /* dac=ln(lhs) */ + /* [no error possible, as lhs 0 already handled] */ + if (ISZERO(dac)) { /* x==1, 1.0, etc. */ + /* need to return fully-padded 1.0000 etc., but rhsint->1 */ + *dac->lsu=1; /* was 0, make int 1 */ + if (!rhsint) { /* add padding */ + Int shift=set->digits-1; + dac->digits=decShiftToMost(dac->lsu, 1, shift); + dac->exponent=-shift; /* make 1.0000... */ + status|=DEC_Inexact|DEC_Rounded; /* deemed inexact */ + } + } + else { + decMultiplyOp(dac, dac, rhs, &aset, &status); /* dac=dac*rhs */ + decExpOp(dac, dac, &aset, &status); /* dac=exp(dac) */ + } + /* and drop through for final rounding */ + } /* non-integer rhs */ + + else { /* carry on with integer */ + decNumberZero(dac); /* acc=1 */ + *dac->lsu=1; /* .. */ + + /* if a negative power the constant 1 is needed, and if not subset */ + /* invert the lhs now rather than inverting the result later */ + if (decNumberIsNegative(rhs)) { /* was a **-n [hence digits>0] */ + decNumber *inv=invbuff; /* asssume use fixed buffer */ + decNumberCopy(&dnOne, dac); /* dnOne=1; [needed now or later] */ + #if DECSUBSET + if (set->extended) { /* need to calculate 1/lhs */ + #endif + /* divide lhs into 1, putting result in dac [dac=1/dac] */ + decDivideOp(dac, &dnOne, lhs, &aset, DIVIDE, &status); + /* now locate or allocate space for the inverted lhs */ + if (needbytes>sizeof(invbuff)) { + allocinv=(decNumber *)malloc(needbytes); + if (allocinv==NULL) { /* hopeless -- abandon */ + status|=DEC_Insufficient_storage; + break;} + inv=allocinv; /* use the allocated space */ + } + /* [inv now points to big-enough buffer or allocated storage] */ + decNumberCopy(inv, dac); /* copy the 1/lhs */ + decNumberCopy(dac, &dnOne); /* restore acc=1 */ + lhs=inv; /* .. and go forward with new lhs */ + #if DECSUBSET + } + #endif + } + + /* Raise-to-the-power loop... */ + seenbit=0; /* set once a 1-bit is encountered */ + for (i=1;;i++){ /* for each bit [top bit ignored] */ + /* abandon if had overflow or terminal underflow */ + if (status & (DEC_Overflow|DEC_Underflow)) { /* interesting? */ + if (status&DEC_Overflow || ISZERO(dac)) break; + } + /* [the following two lines revealed an optimizer bug in a C++ */ + /* compiler, with symptom: 5**3 -> 25, when n=n+n was used] */ + n=n<<1; /* move next bit to testable position */ + if (n<0) { /* top bit is set */ + seenbit=1; /* OK, significant bit seen */ + decMultiplyOp(dac, dac, lhs, &aset, &status); /* dac=dac*x */ + } + if (i==31) break; /* that was the last bit */ + if (!seenbit) continue; /* no need to square 1 */ + decMultiplyOp(dac, dac, dac, &aset, &status); /* dac=dac*dac [square] */ + } /*i*/ /* 32 bits */ + + /* complete internal overflow or underflow processing */ + if (status & (DEC_Overflow|DEC_Underflow)) { + #if DECSUBSET + /* If subset, and power was negative, reverse the kind of -erflow */ + /* [1/x not yet done] */ + if (!set->extended && decNumberIsNegative(rhs)) { + if (status & DEC_Overflow) + status^=DEC_Overflow | DEC_Underflow | DEC_Subnormal; + else { /* trickier -- Underflow may or may not be set */ + status&=~(DEC_Underflow | DEC_Subnormal); /* [one or both] */ + status|=DEC_Overflow; + } + } + #endif + dac->bits=(dac->bits & ~DECNEG) | bits; /* force correct sign */ + /* round subnormals [to set.digits rather than aset.digits] */ + /* or set overflow result similarly as required */ + decFinalize(dac, set, &residue, &status); + decNumberCopy(res, dac); /* copy to result (is now OK length) */ + break; + } + + #if DECSUBSET + if (!set->extended && /* subset math */ + decNumberIsNegative(rhs)) { /* was a **-n [hence digits>0] */ + /* so divide result into 1 [dac=1/dac] */ + decDivideOp(dac, &dnOne, dac, &aset, DIVIDE, &status); + } + #endif + } /* rhs integer path */ + + /* reduce result to the requested length and copy to result */ + decCopyFit(res, dac, set, &residue, &status); + decFinish(res, set, &residue, &status); /* final cleanup */ + #if DECSUBSET + if (!set->extended) decTrim(res, set, 0, &dropped); /* trailing zeros */ + #endif + } while(0); /* end protected */ + + if (allocdac!=NULL) free(allocdac); /* drop any storage used */ + if (allocinv!=NULL) free(allocinv); /* .. */ + #if DECSUBSET + if (alloclhs!=NULL) free(alloclhs); /* .. */ + if (allocrhs!=NULL) free(allocrhs); /* .. */ + #endif + if (status!=0) decStatus(res, status, set); + #if DECCHECK + decCheckInexact(res, set); + #endif + return res; + } /* decNumberPower */ + +/* ------------------------------------------------------------------ */ +/* decNumberQuantize -- force exponent to requested value */ +/* */ +/* This computes C = op(A, B), where op adjusts the coefficient */ +/* of C (by rounding or shifting) such that the exponent (-scale) */ +/* of C has exponent of B. The numerical value of C will equal A, */ +/* except for the effects of any rounding that occurred. */ +/* */ +/* res is C, the result. C may be A or B */ +/* lhs is A, the number to adjust */ +/* rhs is B, the number with exponent to match */ +/* set is the context */ +/* */ +/* C must have space for set->digits digits. */ +/* */ +/* Unless there is an error or the result is infinite, the exponent */ +/* after the operation is guaranteed to be equal to that of B. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberQuantize(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + uInt status=0; /* accumulator */ + decQuantizeOp(res, lhs, rhs, set, 1, &status); + if (status!=0) decStatus(res, status, set); + return res; + } /* decNumberQuantize */ + +/* ------------------------------------------------------------------ */ +/* decNumberReduce -- remove trailing zeros */ +/* */ +/* This computes C = 0 + A, and normalizes the result */ +/* */ +/* res is C, the result. C may be A */ +/* rhs is A */ +/* set is the context */ +/* */ +/* C must have space for set->digits digits. */ +/* ------------------------------------------------------------------ */ +/* Previously known as Normalize */ +decNumber * decNumberNormalize(decNumber *res, const decNumber *rhs, + decContext *set) { + return decNumberReduce(res, rhs, set); + } /* decNumberNormalize */ + +decNumber * decNumberReduce(decNumber *res, const decNumber *rhs, + decContext *set) { + #if DECSUBSET + decNumber *allocrhs=NULL; /* non-NULL if rounded rhs allocated */ + #endif + uInt status=0; /* as usual */ + Int residue=0; /* as usual */ + Int dropped; /* work */ + + #if DECCHECK + if (decCheckOperands(res, DECUNUSED, rhs, set)) return res; + #endif + + do { /* protect allocated storage */ + #if DECSUBSET + if (!set->extended) { + /* reduce operand and set lostDigits status, as needed */ + if (rhs->digits>set->digits) { + allocrhs=decRoundOperand(rhs, set, &status); + if (allocrhs==NULL) break; + rhs=allocrhs; + } + } + #endif + /* [following code does not require input rounding] */ + + /* Infinities copy through; NaNs need usual treatment */ + if (decNumberIsNaN(rhs)) { + decNaNs(res, rhs, NULL, set, &status); + break; + } + + /* reduce result to the requested length and copy to result */ + decCopyFit(res, rhs, set, &residue, &status); /* copy & round */ + decFinish(res, set, &residue, &status); /* cleanup/set flags */ + decTrim(res, set, 1, &dropped); /* normalize in place */ + } while(0); /* end protected */ + + #if DECSUBSET + if (allocrhs !=NULL) free(allocrhs); /* .. */ + #endif + if (status!=0) decStatus(res, status, set);/* then report status */ + return res; + } /* decNumberReduce */ + +/* ------------------------------------------------------------------ */ +/* decNumberRescale -- force exponent to requested value */ +/* */ +/* This computes C = op(A, B), where op adjusts the coefficient */ +/* of C (by rounding or shifting) such that the exponent (-scale) */ +/* of C has the value B. The numerical value of C will equal A, */ +/* except for the effects of any rounding that occurred. */ +/* */ +/* res is C, the result. C may be A or B */ +/* lhs is A, the number to adjust */ +/* rhs is B, the requested exponent */ +/* set is the context */ +/* */ +/* C must have space for set->digits digits. */ +/* */ +/* Unless there is an error or the result is infinite, the exponent */ +/* after the operation is guaranteed to be equal to B. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberRescale(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + uInt status=0; /* accumulator */ + decQuantizeOp(res, lhs, rhs, set, 0, &status); + if (status!=0) decStatus(res, status, set); + return res; + } /* decNumberRescale */ + +/* ------------------------------------------------------------------ */ +/* decNumberRemainder -- divide and return remainder */ +/* */ +/* This computes C = A % B */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X%X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* */ +/* C must have space for set->digits digits. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberRemainder(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + uInt status=0; /* accumulator */ + decDivideOp(res, lhs, rhs, set, REMAINDER, &status); + if (status!=0) decStatus(res, status, set); + #if DECCHECK + decCheckInexact(res, set); + #endif + return res; + } /* decNumberRemainder */ + +/* ------------------------------------------------------------------ */ +/* decNumberRemainderNear -- divide and return remainder from nearest */ +/* */ +/* This computes C = A % B, where % is the IEEE remainder operator */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X%X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* */ +/* C must have space for set->digits digits. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberRemainderNear(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + uInt status=0; /* accumulator */ + decDivideOp(res, lhs, rhs, set, REMNEAR, &status); + if (status!=0) decStatus(res, status, set); + #if DECCHECK + decCheckInexact(res, set); + #endif + return res; + } /* decNumberRemainderNear */ + +/* ------------------------------------------------------------------ */ +/* decNumberRotate -- rotate the coefficient of a Number left/right */ +/* */ +/* This computes C = A rot B (in base ten and rotating set->digits */ +/* digits). */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=XrotX) */ +/* lhs is A */ +/* rhs is B, the number of digits to rotate (-ve to right) */ +/* set is the context */ +/* */ +/* The digits of the coefficient of A are rotated to the left (if B */ +/* is positive) or to the right (if B is negative) without adjusting */ +/* the exponent or the sign of A. If lhs->digits is less than */ +/* set->digits the coefficient is padded with zeros on the left */ +/* before the rotate. Any leading zeros in the result are removed */ +/* as usual. */ +/* */ +/* B must be an integer (q=0) and in the range -set->digits through */ +/* +set->digits. */ +/* C must have space for set->digits digits. */ +/* NaNs are propagated as usual. Infinities are unaffected (but */ +/* B must be valid). No status is set unless B is invalid or an */ +/* operand is an sNaN. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberRotate(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + uInt status=0; /* accumulator */ + Int rotate; /* rhs as an Int */ + + #if DECCHECK + if (decCheckOperands(res, lhs, rhs, set)) return res; + #endif + + /* NaNs propagate as normal */ + if (decNumberIsNaN(lhs) || decNumberIsNaN(rhs)) + decNaNs(res, lhs, rhs, set, &status); + /* rhs must be an integer */ + else if (decNumberIsInfinite(rhs) || rhs->exponent!=0) + status=DEC_Invalid_operation; + else { /* both numeric, rhs is an integer */ + rotate=decGetInt(rhs); /* [cannot fail] */ + if (rotate==BADINT /* something bad .. */ + || rotate==BIGODD || rotate==BIGEVEN /* .. very big .. */ + || abs(rotate)>set->digits) /* .. or out of range */ + status=DEC_Invalid_operation; + else { /* rhs is OK */ + decNumberCopy(res, lhs); + /* convert -ve rotate to equivalent positive rotation */ + if (rotate<0) rotate=set->digits+rotate; + if (rotate!=0 && rotate!=set->digits /* zero or full rotation */ + && !decNumberIsInfinite(res)) { /* lhs was infinite */ + /* left-rotate to do; 0 < rotate < set->digits */ + uInt units, shift; /* work */ + uInt msudigits; /* digits in result msu */ + Unit *msu=res->lsu+D2U(res->digits)-1; /* current msu */ + Unit *msumax=res->lsu+D2U(set->digits)-1; /* rotation msu */ + for (msu++; msu<=msumax; msu++) *msu=0; /* ensure high units=0 */ + res->digits=set->digits; /* now full-length */ + msudigits=MSUDIGITS(res->digits); /* actual digits in msu */ + + /* rotation here is done in-place, in three steps */ + /* 1. shift all to least up to one unit to unit-align final */ + /* lsd [any digits shifted out are rotated to the left, */ + /* abutted to the original msd (which may require split)] */ + /* */ + /* [if there are no whole units left to rotate, the */ + /* rotation is now complete] */ + /* */ + /* 2. shift to least, from below the split point only, so that */ + /* the final msd is in the right place in its Unit [any */ + /* digits shifted out will fit exactly in the current msu, */ + /* left aligned, no split required] */ + /* */ + /* 3. rotate all the units by reversing left part, right */ + /* part, and then whole */ + /* */ + /* example: rotate right 8 digits (2 units + 2), DECDPUN=3. */ + /* */ + /* start: 00a bcd efg hij klm npq */ + /* */ + /* 1a 000 0ab cde fgh|ijk lmn [pq saved] */ + /* 1b 00p qab cde fgh|ijk lmn */ + /* */ + /* 2a 00p qab cde fgh|00i jkl [mn saved] */ + /* 2b mnp qab cde fgh|00i jkl */ + /* */ + /* 3a fgh cde qab mnp|00i jkl */ + /* 3b fgh cde qab mnp|jkl 00i */ + /* 3c 00i jkl mnp qab cde fgh */ + + /* Step 1: amount to shift is the partial right-rotate count */ + rotate=set->digits-rotate; /* make it right-rotate */ + units=rotate/DECDPUN; /* whole units to rotate */ + shift=rotate%DECDPUN; /* left-over digits count */ + if (shift>0) { /* not an exact number of units */ + uInt save=res->lsu[0]%powers[shift]; /* save low digit(s) */ + decShiftToLeast(res->lsu, D2U(res->digits), shift); + if (shift>msudigits) { /* msumax-1 needs >0 digits */ + uInt rem=save%powers[shift-msudigits];/* split save */ + *msumax=(Unit)(save/powers[shift-msudigits]); /* and insert */ + *(msumax-1)=*(msumax-1) + +(Unit)(rem*powers[DECDPUN-(shift-msudigits)]); /* .. */ + } + else { /* all fits in msumax */ + *msumax=*msumax+(Unit)(save*powers[msudigits-shift]); /* [maybe *1] */ + } + } /* digits shift needed */ + + /* If whole units to rotate... */ + if (units>0) { /* some to do */ + /* Step 2: the units to touch are the whole ones in rotate, */ + /* if any, and the shift is DECDPUN-msudigits (which may be */ + /* 0, again) */ + shift=DECDPUN-msudigits; + if (shift>0) { /* not an exact number of units */ + uInt save=res->lsu[0]%powers[shift]; /* save low digit(s) */ + decShiftToLeast(res->lsu, units, shift); + *msumax=*msumax+(Unit)(save*powers[msudigits]); + } /* partial shift needed */ + + /* Step 3: rotate the units array using triple reverse */ + /* (reversing is easy and fast) */ + decReverse(res->lsu+units, msumax); /* left part */ + decReverse(res->lsu, res->lsu+units-1); /* right part */ + decReverse(res->lsu, msumax); /* whole */ + } /* whole units to rotate */ + /* the rotation may have left an undetermined number of zeros */ + /* on the left, so true length needs to be calculated */ + res->digits=decGetDigits(res->lsu, msumax-res->lsu+1); + } /* rotate needed */ + } /* rhs OK */ + } /* numerics */ + if (status!=0) decStatus(res, status, set); + return res; + } /* decNumberRotate */ + +/* ------------------------------------------------------------------ */ +/* decNumberSameQuantum -- test for equal exponents */ +/* */ +/* res is the result number, which will contain either 0 or 1 */ +/* lhs is a number to test */ +/* rhs is the second (usually a pattern) */ +/* */ +/* No errors are possible and no context is needed. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberSameQuantum(decNumber *res, const decNumber *lhs, + const decNumber *rhs) { + Unit ret=0; /* return value */ + + #if DECCHECK + if (decCheckOperands(res, lhs, rhs, DECUNCONT)) return res; + #endif + + if (SPECIALARGS) { + if (decNumberIsNaN(lhs) && decNumberIsNaN(rhs)) ret=1; + else if (decNumberIsInfinite(lhs) && decNumberIsInfinite(rhs)) ret=1; + /* [anything else with a special gives 0] */ + } + else if (lhs->exponent==rhs->exponent) ret=1; + + decNumberZero(res); /* OK to overwrite an operand now */ + *res->lsu=ret; + return res; + } /* decNumberSameQuantum */ + +/* ------------------------------------------------------------------ */ +/* decNumberScaleB -- multiply by a power of 10 */ +/* */ +/* This computes C = A x 10**B where B is an integer (q=0) with */ +/* maximum magnitude 2*(emax+digits) */ +/* */ +/* res is C, the result. C may be A or B */ +/* lhs is A, the number to adjust */ +/* rhs is B, the requested power of ten to use */ +/* set is the context */ +/* */ +/* C must have space for set->digits digits. */ +/* */ +/* The result may underflow or overflow. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberScaleB(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + Int reqexp; /* requested exponent change [B] */ + uInt status=0; /* accumulator */ + Int residue; /* work */ + + #if DECCHECK + if (decCheckOperands(res, lhs, rhs, set)) return res; + #endif + + /* Handle special values except lhs infinite */ + if (decNumberIsNaN(lhs) || decNumberIsNaN(rhs)) + decNaNs(res, lhs, rhs, set, &status); + /* rhs must be an integer */ + else if (decNumberIsInfinite(rhs) || rhs->exponent!=0) + status=DEC_Invalid_operation; + else { + /* lhs is a number; rhs is a finite with q==0 */ + reqexp=decGetInt(rhs); /* [cannot fail] */ + if (reqexp==BADINT /* something bad .. */ + || reqexp==BIGODD || reqexp==BIGEVEN /* .. very big .. */ + || abs(reqexp)>(2*(set->digits+set->emax))) /* .. or out of range */ + status=DEC_Invalid_operation; + else { /* rhs is OK */ + decNumberCopy(res, lhs); /* all done if infinite lhs */ + if (!decNumberIsInfinite(res)) { /* prepare to scale */ + res->exponent+=reqexp; /* adjust the exponent */ + residue=0; + decFinalize(res, set, &residue, &status); /* .. and check */ + } /* finite LHS */ + } /* rhs OK */ + } /* rhs finite */ + if (status!=0) decStatus(res, status, set); + return res; + } /* decNumberScaleB */ + +/* ------------------------------------------------------------------ */ +/* decNumberShift -- shift the coefficient of a Number left or right */ +/* */ +/* This computes C = A << B or C = A >> -B (in base ten). */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X<<X) */ +/* lhs is A */ +/* rhs is B, the number of digits to shift (-ve to right) */ +/* set is the context */ +/* */ +/* The digits of the coefficient of A are shifted to the left (if B */ +/* is positive) or to the right (if B is negative) without adjusting */ +/* the exponent or the sign of A. */ +/* */ +/* B must be an integer (q=0) and in the range -set->digits through */ +/* +set->digits. */ +/* C must have space for set->digits digits. */ +/* NaNs are propagated as usual. Infinities are unaffected (but */ +/* B must be valid). No status is set unless B is invalid or an */ +/* operand is an sNaN. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberShift(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + uInt status=0; /* accumulator */ + Int shift; /* rhs as an Int */ + + #if DECCHECK + if (decCheckOperands(res, lhs, rhs, set)) return res; + #endif + + /* NaNs propagate as normal */ + if (decNumberIsNaN(lhs) || decNumberIsNaN(rhs)) + decNaNs(res, lhs, rhs, set, &status); + /* rhs must be an integer */ + else if (decNumberIsInfinite(rhs) || rhs->exponent!=0) + status=DEC_Invalid_operation; + else { /* both numeric, rhs is an integer */ + shift=decGetInt(rhs); /* [cannot fail] */ + if (shift==BADINT /* something bad .. */ + || shift==BIGODD || shift==BIGEVEN /* .. very big .. */ + || abs(shift)>set->digits) /* .. or out of range */ + status=DEC_Invalid_operation; + else { /* rhs is OK */ + decNumberCopy(res, lhs); + if (shift!=0 && !decNumberIsInfinite(res)) { /* something to do */ + if (shift>0) { /* to left */ + if (shift==set->digits) { /* removing all */ + *res->lsu=0; /* so place 0 */ + res->digits=1; /* .. */ + } + else { /* */ + /* first remove leading digits if necessary */ + if (res->digits+shift>set->digits) { + decDecap(res, res->digits+shift-set->digits); + /* that updated res->digits; may have gone to 1 (for a */ + /* single digit or for zero */ + } + if (res->digits>1 || *res->lsu) /* if non-zero.. */ + res->digits=decShiftToMost(res->lsu, res->digits, shift); + } /* partial left */ + } /* left */ + else { /* to right */ + if (-shift>=res->digits) { /* discarding all */ + *res->lsu=0; /* so place 0 */ + res->digits=1; /* .. */ + } + else { + decShiftToLeast(res->lsu, D2U(res->digits), -shift); + res->digits-=(-shift); + } + } /* to right */ + } /* non-0 non-Inf shift */ + } /* rhs OK */ + } /* numerics */ + if (status!=0) decStatus(res, status, set); + return res; + } /* decNumberShift */ + +/* ------------------------------------------------------------------ */ +/* decNumberSquareRoot -- square root operator */ +/* */ +/* This computes C = squareroot(A) */ +/* */ +/* res is C, the result. C may be A */ +/* rhs is A */ +/* set is the context; note that rounding mode has no effect */ +/* */ +/* C must have space for set->digits digits. */ +/* ------------------------------------------------------------------ */ +/* This uses the following varying-precision algorithm in: */ +/* */ +/* Properly Rounded Variable Precision Square Root, T. E. Hull and */ +/* A. Abrham, ACM Transactions on Mathematical Software, Vol 11 #3, */ +/* pp229-237, ACM, September 1985. */ +/* */ +/* The square-root is calculated using Newton's method, after which */ +/* a check is made to ensure the result is correctly rounded. */ +/* */ +/* % [Reformatted original Numerical Turing source code follows.] */ +/* function sqrt(x : real) : real */ +/* % sqrt(x) returns the properly rounded approximation to the square */ +/* % root of x, in the precision of the calling environment, or it */ +/* % fails if x < 0. */ +/* % t e hull and a abrham, august, 1984 */ +/* if x <= 0 then */ +/* if x < 0 then */ +/* assert false */ +/* else */ +/* result 0 */ +/* end if */ +/* end if */ +/* var f := setexp(x, 0) % fraction part of x [0.1 <= x < 1] */ +/* var e := getexp(x) % exponent part of x */ +/* var approx : real */ +/* if e mod 2 = 0 then */ +/* approx := .259 + .819 * f % approx to root of f */ +/* else */ +/* f := f/l0 % adjustments */ +/* e := e + 1 % for odd */ +/* approx := .0819 + 2.59 * f % exponent */ +/* end if */ +/* */ +/* var p:= 3 */ +/* const maxp := currentprecision + 2 */ +/* loop */ +/* p := min(2*p - 2, maxp) % p = 4,6,10, . . . , maxp */ +/* precision p */ +/* approx := .5 * (approx + f/approx) */ +/* exit when p = maxp */ +/* end loop */ +/* */ +/* % approx is now within 1 ulp of the properly rounded square root */ +/* % of f; to ensure proper rounding, compare squares of (approx - */ +/* % l/2 ulp) and (approx + l/2 ulp) with f. */ +/* p := currentprecision */ +/* begin */ +/* precision p + 2 */ +/* const approxsubhalf := approx - setexp(.5, -p) */ +/* if mulru(approxsubhalf, approxsubhalf) > f then */ +/* approx := approx - setexp(.l, -p + 1) */ +/* else */ +/* const approxaddhalf := approx + setexp(.5, -p) */ +/* if mulrd(approxaddhalf, approxaddhalf) < f then */ +/* approx := approx + setexp(.l, -p + 1) */ +/* end if */ +/* end if */ +/* end */ +/* result setexp(approx, e div 2) % fix exponent */ +/* end sqrt */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberSquareRoot(decNumber *res, const decNumber *rhs, + decContext *set) { + decContext workset, approxset; /* work contexts */ + decNumber dzero; /* used for constant zero */ + Int maxp; /* largest working precision */ + Int workp; /* working precision */ + Int residue=0; /* rounding residue */ + uInt status=0, ignore=0; /* status accumulators */ + uInt rstatus; /* .. */ + Int exp; /* working exponent */ + Int ideal; /* ideal (preferred) exponent */ + Int needbytes; /* work */ + Int dropped; /* .. */ + + #if DECSUBSET + decNumber *allocrhs=NULL; /* non-NULL if rounded rhs allocated */ + #endif + /* buffer for f [needs +1 in case DECBUFFER 0] */ + decNumber buff[D2N(DECBUFFER+1)]; + /* buffer for a [needs +2 to match likely maxp] */ + decNumber bufa[D2N(DECBUFFER+2)]; + /* buffer for temporary, b [must be same size as a] */ + decNumber bufb[D2N(DECBUFFER+2)]; + decNumber *allocbuff=NULL; /* -> allocated buff, iff allocated */ + decNumber *allocbufa=NULL; /* -> allocated bufa, iff allocated */ + decNumber *allocbufb=NULL; /* -> allocated bufb, iff allocated */ + decNumber *f=buff; /* reduced fraction */ + decNumber *a=bufa; /* approximation to result */ + decNumber *b=bufb; /* intermediate result */ + /* buffer for temporary variable, up to 3 digits */ + decNumber buft[D2N(3)]; + decNumber *t=buft; /* up-to-3-digit constant or work */ + + #if DECCHECK + if (decCheckOperands(res, DECUNUSED, rhs, set)) return res; + #endif + + do { /* protect allocated storage */ + #if DECSUBSET + if (!set->extended) { + /* reduce operand and set lostDigits status, as needed */ + if (rhs->digits>set->digits) { + allocrhs=decRoundOperand(rhs, set, &status); + if (allocrhs==NULL) break; + /* [Note: 'f' allocation below could reuse this buffer if */ + /* used, but as this is rare they are kept separate for clarity.] */ + rhs=allocrhs; + } + } + #endif + /* [following code does not require input rounding] */ + + /* handle infinities and NaNs */ + if (SPECIALARG) { + if (decNumberIsInfinite(rhs)) { /* an infinity */ + if (decNumberIsNegative(rhs)) status|=DEC_Invalid_operation; + else decNumberCopy(res, rhs); /* +Infinity */ + } + else decNaNs(res, rhs, NULL, set, &status); /* a NaN */ + break; + } + + /* calculate the ideal (preferred) exponent [floor(exp/2)] */ + /* [We would like to write: ideal=rhs->exponent>>1, but this */ + /* generates a compiler warning. Generated code is the same.] */ + ideal=(rhs->exponent&~1)/2; /* target */ + + /* handle zeros */ + if (ISZERO(rhs)) { + decNumberCopy(res, rhs); /* could be 0 or -0 */ + res->exponent=ideal; /* use the ideal [safe] */ + /* use decFinish to clamp any out-of-range exponent, etc. */ + decFinish(res, set, &residue, &status); + break; + } + + /* any other -x is an oops */ + if (decNumberIsNegative(rhs)) { + status|=DEC_Invalid_operation; + break; + } + + /* space is needed for three working variables */ + /* f -- the same precision as the RHS, reduced to 0.01->0.99... */ + /* a -- Hull's approximation -- precision, when assigned, is */ + /* currentprecision+1 or the input argument precision, */ + /* whichever is larger (+2 for use as temporary) */ + /* b -- intermediate temporary result (same size as a) */ + /* if any is too long for local storage, then allocate */ + workp=MAXI(set->digits+1, rhs->digits); /* actual rounding precision */ + maxp=workp+2; /* largest working precision */ + + needbytes=sizeof(decNumber)+(D2U(rhs->digits)-1)*sizeof(Unit); + if (needbytes>(Int)sizeof(buff)) { + allocbuff=(decNumber *)malloc(needbytes); + if (allocbuff==NULL) { /* hopeless -- abandon */ + status|=DEC_Insufficient_storage; + break;} + f=allocbuff; /* use the allocated space */ + } + /* a and b both need to be able to hold a maxp-length number */ + needbytes=sizeof(decNumber)+(D2U(maxp)-1)*sizeof(Unit); + if (needbytes>(Int)sizeof(bufa)) { /* [same applies to b] */ + allocbufa=(decNumber *)malloc(needbytes); + allocbufb=(decNumber *)malloc(needbytes); + if (allocbufa==NULL || allocbufb==NULL) { /* hopeless */ + status|=DEC_Insufficient_storage; + break;} + a=allocbufa; /* use the allocated spaces */ + b=allocbufb; /* .. */ + } + + /* copy rhs -> f, save exponent, and reduce so 0.1 <= f < 1 */ + decNumberCopy(f, rhs); + exp=f->exponent+f->digits; /* adjusted to Hull rules */ + f->exponent=-(f->digits); /* to range */ + + /* set up working context */ + decContextDefault(&workset, DEC_INIT_DECIMAL64); + + /* [Until further notice, no error is possible and status bits */ + /* (Rounded, etc.) should be ignored, not accumulated.] */ + + /* Calculate initial approximation, and allow for odd exponent */ + workset.digits=workp; /* p for initial calculation */ + t->bits=0; t->digits=3; + a->bits=0; a->digits=3; + if ((exp & 1)==0) { /* even exponent */ + /* Set t=0.259, a=0.819 */ + t->exponent=-3; + a->exponent=-3; + #if DECDPUN>=3 + t->lsu[0]=259; + a->lsu[0]=819; + #elif DECDPUN==2 + t->lsu[0]=59; t->lsu[1]=2; + a->lsu[0]=19; a->lsu[1]=8; + #else + t->lsu[0]=9; t->lsu[1]=5; t->lsu[2]=2; + a->lsu[0]=9; a->lsu[1]=1; a->lsu[2]=8; + #endif + } + else { /* odd exponent */ + /* Set t=0.0819, a=2.59 */ + f->exponent--; /* f=f/10 */ + exp++; /* e=e+1 */ + t->exponent=-4; + a->exponent=-2; + #if DECDPUN>=3 + t->lsu[0]=819; + a->lsu[0]=259; + #elif DECDPUN==2 + t->lsu[0]=19; t->lsu[1]=8; + a->lsu[0]=59; a->lsu[1]=2; + #else + t->lsu[0]=9; t->lsu[1]=1; t->lsu[2]=8; + a->lsu[0]=9; a->lsu[1]=5; a->lsu[2]=2; + #endif + } + decMultiplyOp(a, a, f, &workset, &ignore); /* a=a*f */ + decAddOp(a, a, t, &workset, 0, &ignore); /* ..+t */ + /* [a is now the initial approximation for sqrt(f), calculated with */ + /* currentprecision, which is also a's precision.] */ + + /* the main calculation loop */ + decNumberZero(&dzero); /* make 0 */ + decNumberZero(t); /* set t = 0.5 */ + t->lsu[0]=5; /* .. */ + t->exponent=-1; /* .. */ + workset.digits=3; /* initial p */ + for (;;) { + /* set p to min(2*p - 2, maxp) [hence 3; or: 4, 6, 10, ... , maxp] */ + workset.digits=workset.digits*2-2; + if (workset.digits>maxp) workset.digits=maxp; + /* a = 0.5 * (a + f/a) */ + /* [calculated at p then rounded to currentprecision] */ + decDivideOp(b, f, a, &workset, DIVIDE, &ignore); /* b=f/a */ + decAddOp(b, b, a, &workset, 0, &ignore); /* b=b+a */ + decMultiplyOp(a, b, t, &workset, &ignore); /* a=b*0.5 */ + if (a->digits==maxp) break; /* have required digits */ + } /* loop */ + + /* Here, 0.1 <= a < 1 [Hull], and a has maxp digits */ + /* now reduce to length, etc.; this needs to be done with a */ + /* having the correct exponent so as to handle subnormals */ + /* correctly */ + approxset=*set; /* get emin, emax, etc. */ + approxset.round=DEC_ROUND_HALF_EVEN; + a->exponent+=exp/2; /* set correct exponent */ + + rstatus=0; /* clear status */ + residue=0; /* .. and accumulator */ + decCopyFit(a, a, &approxset, &residue, &rstatus); /* reduce (if needed) */ + decFinish(a, &approxset, &residue, &rstatus); /* clean and finalize */ + + /* Overflow was possible if the input exponent was out-of-range, */ + /* in which case quit */ + if (rstatus&DEC_Overflow) { + status=rstatus; /* use the status as-is */ + decNumberCopy(res, a); /* copy to result */ + break; + } + + /* Preserve status except Inexact/Rounded */ + status|=(rstatus & ~(DEC_Rounded|DEC_Inexact)); + + /* Carry out the Hull correction */ + a->exponent-=exp/2; /* back to 0.1->1 */ + + /* a is now at final precision and within 1 ulp of the properly */ + /* rounded square root of f; to ensure proper rounding, compare */ + /* squares of (a - l/2 ulp) and (a + l/2 ulp) with f. */ + /* Here workset.digits=maxp and t=0.5, and a->digits determines */ + /* the ulp */ + workset.digits--; /* maxp-1 is OK now */ + t->exponent=-a->digits-1; /* make 0.5 ulp */ + decAddOp(b, a, t, &workset, DECNEG, &ignore); /* b = a - 0.5 ulp */ + workset.round=DEC_ROUND_UP; + decMultiplyOp(b, b, b, &workset, &ignore); /* b = mulru(b, b) */ + decCompareOp(b, f, b, &workset, COMPARE, &ignore); /* b ? f, reversed */ + if (decNumberIsNegative(b)) { /* f < b [i.e., b > f] */ + /* this is the more common adjustment, though both are rare */ + t->exponent++; /* make 1.0 ulp */ + t->lsu[0]=1; /* .. */ + decAddOp(a, a, t, &workset, DECNEG, &ignore); /* a = a - 1 ulp */ + /* assign to approx [round to length] */ + approxset.emin-=exp/2; /* adjust to match a */ + approxset.emax-=exp/2; + decAddOp(a, &dzero, a, &approxset, 0, &ignore); + } + else { + decAddOp(b, a, t, &workset, 0, &ignore); /* b = a + 0.5 ulp */ + workset.round=DEC_ROUND_DOWN; + decMultiplyOp(b, b, b, &workset, &ignore); /* b = mulrd(b, b) */ + decCompareOp(b, b, f, &workset, COMPARE, &ignore); /* b ? f */ + if (decNumberIsNegative(b)) { /* b < f */ + t->exponent++; /* make 1.0 ulp */ + t->lsu[0]=1; /* .. */ + decAddOp(a, a, t, &workset, 0, &ignore); /* a = a + 1 ulp */ + /* assign to approx [round to length] */ + approxset.emin-=exp/2; /* adjust to match a */ + approxset.emax-=exp/2; + decAddOp(a, &dzero, a, &approxset, 0, &ignore); + } + } + /* [no errors are possible in the above, and rounding/inexact during */ + /* estimation are irrelevant, so status was not accumulated] */ + + /* Here, 0.1 <= a < 1 (still), so adjust back */ + a->exponent+=exp/2; /* set correct exponent */ + + /* count droppable zeros [after any subnormal rounding] by */ + /* trimming a copy */ + decNumberCopy(b, a); + decTrim(b, set, 1, &dropped); /* [drops trailing zeros] */ + + /* Set Inexact and Rounded. The answer can only be exact if */ + /* it is short enough so that squaring it could fit in workp digits, */ + /* and it cannot have trailing zeros due to clamping, so these are */ + /* the only (relatively rare) conditions a careful check is needed */ + if (b->digits*2-1 > workp && !set->clamp) { /* cannot fit */ + status|=DEC_Inexact|DEC_Rounded; + } + else { /* could be exact/unrounded */ + uInt mstatus=0; /* local status */ + decMultiplyOp(b, b, b, &workset, &mstatus); /* try the multiply */ + if (mstatus&DEC_Overflow) { /* result just won't fit */ + status|=DEC_Inexact|DEC_Rounded; + } + else { /* plausible */ + decCompareOp(t, b, rhs, &workset, COMPARE, &mstatus); /* b ? rhs */ + if (!ISZERO(t)) status|=DEC_Inexact|DEC_Rounded; /* not equal */ + else { /* is Exact */ + /* here, dropped is the count of trailing zeros in 'a' */ + /* use closest exponent to ideal... */ + Int todrop=ideal-a->exponent; /* most that can be dropped */ + if (todrop<0) status|=DEC_Rounded; /* ideally would add 0s */ + else { /* unrounded */ + if (dropped<todrop) { /* clamp to those available */ + todrop=dropped; + status|=DEC_Clamped; + } + if (todrop>0) { /* have some to drop */ + decShiftToLeast(a->lsu, D2U(a->digits), todrop); + a->exponent+=todrop; /* maintain numerical value */ + a->digits-=todrop; /* new length */ + } + } + } + } + } + + /* double-check Underflow, as perhaps the result could not have */ + /* been subnormal (initial argument too big), or it is now Exact */ + if (status&DEC_Underflow) { + Int ae=rhs->exponent+rhs->digits-1; /* adjusted exponent */ + /* check if truly subnormal */ + #if DECEXTFLAG /* DEC_Subnormal too */ + if (ae>=set->emin*2) status&=~(DEC_Subnormal|DEC_Underflow); + #else + if (ae>=set->emin*2) status&=~DEC_Underflow; + #endif + /* check if truly inexact */ + if (!(status&DEC_Inexact)) status&=~DEC_Underflow; + } + + decNumberCopy(res, a); /* a is now the result */ + } while(0); /* end protected */ + + if (allocbuff!=NULL) free(allocbuff); /* drop any storage used */ + if (allocbufa!=NULL) free(allocbufa); /* .. */ + if (allocbufb!=NULL) free(allocbufb); /* .. */ + #if DECSUBSET + if (allocrhs !=NULL) free(allocrhs); /* .. */ + #endif + if (status!=0) decStatus(res, status, set);/* then report status */ + #if DECCHECK + decCheckInexact(res, set); + #endif + return res; + } /* decNumberSquareRoot */ + +/* ------------------------------------------------------------------ */ +/* decNumberSubtract -- subtract two Numbers */ +/* */ +/* This computes C = A - B */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X-X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* */ +/* C must have space for set->digits digits. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberSubtract(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + uInt status=0; /* accumulator */ + + decAddOp(res, lhs, rhs, set, DECNEG, &status); + if (status!=0) decStatus(res, status, set); + #if DECCHECK + decCheckInexact(res, set); + #endif + return res; + } /* decNumberSubtract */ + +/* ------------------------------------------------------------------ */ +/* decNumberToIntegralExact -- round-to-integral-value with InExact */ +/* decNumberToIntegralValue -- round-to-integral-value */ +/* */ +/* res is the result */ +/* rhs is input number */ +/* set is the context */ +/* */ +/* res must have space for any value of rhs. */ +/* */ +/* This implements the IEEE special operators and therefore treats */ +/* special values as valid. For finite numbers it returns */ +/* rescale(rhs, 0) if rhs->exponent is <0. */ +/* Otherwise the result is rhs (so no error is possible, except for */ +/* sNaN). */ +/* */ +/* The context is used for rounding mode and status after sNaN, but */ +/* the digits setting is ignored. The Exact version will signal */ +/* Inexact if the result differs numerically from rhs; the other */ +/* never signals Inexact. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberToIntegralExact(decNumber *res, const decNumber *rhs, + decContext *set) { + decNumber dn; + decContext workset; /* working context */ + uInt status=0; /* accumulator */ + + #if DECCHECK + if (decCheckOperands(res, DECUNUSED, rhs, set)) return res; + #endif + + /* handle infinities and NaNs */ + if (SPECIALARG) { + if (decNumberIsInfinite(rhs)) decNumberCopy(res, rhs); /* an Infinity */ + else decNaNs(res, rhs, NULL, set, &status); /* a NaN */ + } + else { /* finite */ + /* have a finite number; no error possible (res must be big enough) */ + if (rhs->exponent>=0) return decNumberCopy(res, rhs); + /* that was easy, but if negative exponent there is work to do... */ + workset=*set; /* clone rounding, etc. */ + workset.digits=rhs->digits; /* no length rounding */ + workset.traps=0; /* no traps */ + decNumberZero(&dn); /* make a number with exponent 0 */ + decNumberQuantize(res, rhs, &dn, &workset); + status|=workset.status; + } + if (status!=0) decStatus(res, status, set); + return res; + } /* decNumberToIntegralExact */ + +decNumber * decNumberToIntegralValue(decNumber *res, const decNumber *rhs, + decContext *set) { + decContext workset=*set; /* working context */ + workset.traps=0; /* no traps */ + decNumberToIntegralExact(res, rhs, &workset); + /* this never affects set, except for sNaNs; NaN will have been set */ + /* or propagated already, so no need to call decStatus */ + set->status|=workset.status&DEC_Invalid_operation; + return res; + } /* decNumberToIntegralValue */ + +/* ------------------------------------------------------------------ */ +/* decNumberXor -- XOR two Numbers, digitwise */ +/* */ +/* This computes C = A ^ B */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X^X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context (used for result length and error report) */ +/* */ +/* C must have space for set->digits digits. */ +/* */ +/* Logical function restrictions apply (see above); a NaN is */ +/* returned with Invalid_operation if a restriction is violated. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberXor(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + const Unit *ua, *ub; /* -> operands */ + const Unit *msua, *msub; /* -> operand msus */ + Unit *uc, *msuc; /* -> result and its msu */ + Int msudigs; /* digits in res msu */ + #if DECCHECK + if (decCheckOperands(res, lhs, rhs, set)) return res; + #endif + + if (lhs->exponent!=0 || decNumberIsSpecial(lhs) || decNumberIsNegative(lhs) + || rhs->exponent!=0 || decNumberIsSpecial(rhs) || decNumberIsNegative(rhs)) { + decStatus(res, DEC_Invalid_operation, set); + return res; + } + /* operands are valid */ + ua=lhs->lsu; /* bottom-up */ + ub=rhs->lsu; /* .. */ + uc=res->lsu; /* .. */ + msua=ua+D2U(lhs->digits)-1; /* -> msu of lhs */ + msub=ub+D2U(rhs->digits)-1; /* -> msu of rhs */ + msuc=uc+D2U(set->digits)-1; /* -> msu of result */ + msudigs=MSUDIGITS(set->digits); /* [faster than remainder] */ + for (; uc<=msuc; ua++, ub++, uc++) { /* Unit loop */ + Unit a, b; /* extract units */ + if (ua>msua) a=0; + else a=*ua; + if (ub>msub) b=0; + else b=*ub; + *uc=0; /* can now write back */ + if (a|b) { /* maybe 1 bits to examine */ + Int i, j; + /* This loop could be unrolled and/or use BIN2BCD tables */ + for (i=0; i<DECDPUN; i++) { + if ((a^b)&1) *uc=*uc+(Unit)powers[i]; /* effect XOR */ + j=a%10; + a=a/10; + j|=b%10; + b=b/10; + if (j>1) { + decStatus(res, DEC_Invalid_operation, set); + return res; + } + if (uc==msuc && i==msudigs-1) break; /* just did final digit */ + } /* each digit */ + } /* non-zero */ + } /* each unit */ + /* [here uc-1 is the msu of the result] */ + res->digits=decGetDigits(res->lsu, uc-res->lsu); + res->exponent=0; /* integer */ + res->bits=0; /* sign=0 */ + return res; /* [no status to set] */ + } /* decNumberXor */ + + +/* ================================================================== */ +/* Utility routines */ +/* ================================================================== */ + +/* ------------------------------------------------------------------ */ +/* decNumberClass -- return the decClass of a decNumber */ +/* dn -- the decNumber to test */ +/* set -- the context to use for Emin */ +/* returns the decClass enum */ +/* ------------------------------------------------------------------ */ +enum decClass decNumberClass(const decNumber *dn, decContext *set) { + if (decNumberIsSpecial(dn)) { + if (decNumberIsQNaN(dn)) return DEC_CLASS_QNAN; + if (decNumberIsSNaN(dn)) return DEC_CLASS_SNAN; + /* must be an infinity */ + if (decNumberIsNegative(dn)) return DEC_CLASS_NEG_INF; + return DEC_CLASS_POS_INF; + } + /* is finite */ + if (decNumberIsNormal(dn, set)) { /* most common */ + if (decNumberIsNegative(dn)) return DEC_CLASS_NEG_NORMAL; + return DEC_CLASS_POS_NORMAL; + } + /* is subnormal or zero */ + if (decNumberIsZero(dn)) { /* most common */ + if (decNumberIsNegative(dn)) return DEC_CLASS_NEG_ZERO; + return DEC_CLASS_POS_ZERO; + } + if (decNumberIsNegative(dn)) return DEC_CLASS_NEG_SUBNORMAL; + return DEC_CLASS_POS_SUBNORMAL; + } /* decNumberClass */ + +/* ------------------------------------------------------------------ */ +/* decNumberClassToString -- convert decClass to a string */ +/* */ +/* eclass is a valid decClass */ +/* returns a constant string describing the class (max 13+1 chars) */ +/* ------------------------------------------------------------------ */ +const char *decNumberClassToString(enum decClass eclass) { + if (eclass==DEC_CLASS_POS_NORMAL) return DEC_ClassString_PN; + if (eclass==DEC_CLASS_NEG_NORMAL) return DEC_ClassString_NN; + if (eclass==DEC_CLASS_POS_ZERO) return DEC_ClassString_PZ; + if (eclass==DEC_CLASS_NEG_ZERO) return DEC_ClassString_NZ; + if (eclass==DEC_CLASS_POS_SUBNORMAL) return DEC_ClassString_PS; + if (eclass==DEC_CLASS_NEG_SUBNORMAL) return DEC_ClassString_NS; + if (eclass==DEC_CLASS_POS_INF) return DEC_ClassString_PI; + if (eclass==DEC_CLASS_NEG_INF) return DEC_ClassString_NI; + if (eclass==DEC_CLASS_QNAN) return DEC_ClassString_QN; + if (eclass==DEC_CLASS_SNAN) return DEC_ClassString_SN; + return DEC_ClassString_UN; /* Unknown */ + } /* decNumberClassToString */ + +/* ------------------------------------------------------------------ */ +/* decNumberCopy -- copy a number */ +/* */ +/* dest is the target decNumber */ +/* src is the source decNumber */ +/* returns dest */ +/* */ +/* (dest==src is allowed and is a no-op) */ +/* All fields are updated as required. This is a utility operation, */ +/* so special values are unchanged and no error is possible. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberCopy(decNumber *dest, const decNumber *src) { + + #if DECCHECK + if (src==NULL) return decNumberZero(dest); + #endif + + if (dest==src) return dest; /* no copy required */ + + /* Use explicit assignments here as structure assignment could copy */ + /* more than just the lsu (for small DECDPUN). This would not affect */ + /* the value of the results, but could disturb test harness spill */ + /* checking. */ + dest->bits=src->bits; + dest->exponent=src->exponent; + dest->digits=src->digits; + dest->lsu[0]=src->lsu[0]; + if (src->digits>DECDPUN) { /* more Units to come */ + const Unit *smsup, *s; /* work */ + Unit *d; /* .. */ + /* memcpy for the remaining Units would be safe as they cannot */ + /* overlap. However, this explicit loop is faster in short cases. */ + d=dest->lsu+1; /* -> first destination */ + smsup=src->lsu+D2U(src->digits); /* -> source msu+1 */ + for (s=src->lsu+1; s<smsup; s++, d++) *d=*s; + } + return dest; + } /* decNumberCopy */ + +/* ------------------------------------------------------------------ */ +/* decNumberCopyAbs -- quiet absolute value operator */ +/* */ +/* This sets C = abs(A) */ +/* */ +/* res is C, the result. C may be A */ +/* rhs is A */ +/* */ +/* C must have space for set->digits digits. */ +/* No exception or error can occur; this is a quiet bitwise operation.*/ +/* See also decNumberAbs for a checking version of this. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberCopyAbs(decNumber *res, const decNumber *rhs) { + #if DECCHECK + if (decCheckOperands(res, DECUNUSED, rhs, DECUNCONT)) return res; + #endif + decNumberCopy(res, rhs); + res->bits&=~DECNEG; /* turn off sign */ + return res; + } /* decNumberCopyAbs */ + +/* ------------------------------------------------------------------ */ +/* decNumberCopyNegate -- quiet negate value operator */ +/* */ +/* This sets C = negate(A) */ +/* */ +/* res is C, the result. C may be A */ +/* rhs is A */ +/* */ +/* C must have space for set->digits digits. */ +/* No exception or error can occur; this is a quiet bitwise operation.*/ +/* See also decNumberMinus for a checking version of this. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberCopyNegate(decNumber *res, const decNumber *rhs) { + #if DECCHECK + if (decCheckOperands(res, DECUNUSED, rhs, DECUNCONT)) return res; + #endif + decNumberCopy(res, rhs); + res->bits^=DECNEG; /* invert the sign */ + return res; + } /* decNumberCopyNegate */ + +/* ------------------------------------------------------------------ */ +/* decNumberCopySign -- quiet copy and set sign operator */ +/* */ +/* This sets C = A with the sign of B */ +/* */ +/* res is C, the result. C may be A */ +/* lhs is A */ +/* rhs is B */ +/* */ +/* C must have space for set->digits digits. */ +/* No exception or error can occur; this is a quiet bitwise operation.*/ +/* ------------------------------------------------------------------ */ +decNumber * decNumberCopySign(decNumber *res, const decNumber *lhs, + const decNumber *rhs) { + uByte sign; /* rhs sign */ + #if DECCHECK + if (decCheckOperands(res, DECUNUSED, rhs, DECUNCONT)) return res; + #endif + sign=rhs->bits & DECNEG; /* save sign bit */ + decNumberCopy(res, lhs); + res->bits&=~DECNEG; /* clear the sign */ + res->bits|=sign; /* set from rhs */ + return res; + } /* decNumberCopySign */ + +/* ------------------------------------------------------------------ */ +/* decNumberGetBCD -- get the coefficient in BCD8 */ +/* dn is the source decNumber */ +/* bcd is the uInt array that will receive dn->digits BCD bytes, */ +/* most-significant at offset 0 */ +/* returns bcd */ +/* */ +/* bcd must have at least dn->digits bytes. No error is possible; if */ +/* dn is a NaN or Infinite, digits must be 1 and the coefficient 0. */ +/* ------------------------------------------------------------------ */ +uByte * decNumberGetBCD(const decNumber *dn, uint8_t *bcd) { + uByte *ub=bcd+dn->digits-1; /* -> lsd */ + const Unit *up=dn->lsu; /* Unit pointer, -> lsu */ + + #if DECDPUN==1 /* trivial simple copy */ + for (; ub>=bcd; ub--, up++) *ub=*up; + #else /* chopping needed */ + uInt u=*up; /* work */ + uInt cut=DECDPUN; /* downcounter through unit */ + for (; ub>=bcd; ub--) { + *ub=(uByte)(u%10); /* [*6554 trick inhibits, here] */ + u=u/10; + cut--; + if (cut>0) continue; /* more in this unit */ + up++; + u=*up; + cut=DECDPUN; + } + #endif + return bcd; + } /* decNumberGetBCD */ + +/* ------------------------------------------------------------------ */ +/* decNumberSetBCD -- set (replace) the coefficient from BCD8 */ +/* dn is the target decNumber */ +/* bcd is the uInt array that will source n BCD bytes, most- */ +/* significant at offset 0 */ +/* n is the number of digits in the source BCD array (bcd) */ +/* returns dn */ +/* */ +/* dn must have space for at least n digits. No error is possible; */ +/* if dn is a NaN, or Infinite, or is to become a zero, n must be 1 */ +/* and bcd[0] zero. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberSetBCD(decNumber *dn, const uByte *bcd, uInt n) { + Unit *up=dn->lsu+D2U(dn->digits)-1; /* -> msu [target pointer] */ + const uByte *ub=bcd; /* -> source msd */ + + #if DECDPUN==1 /* trivial simple copy */ + for (; ub<bcd+n; ub++, up--) *up=*ub; + #else /* some assembly needed */ + /* calculate how many digits in msu, and hence first cut */ + Int cut=MSUDIGITS(n); /* [faster than remainder] */ + for (;up>=dn->lsu; up--) { /* each Unit from msu */ + *up=0; /* will take <=DECDPUN digits */ + for (; cut>0; ub++, cut--) *up=X10(*up)+*ub; + cut=DECDPUN; /* next Unit has all digits */ + } + #endif + dn->digits=n; /* set digit count */ + return dn; + } /* decNumberSetBCD */ + +/* ------------------------------------------------------------------ */ +/* decNumberIsNormal -- test normality of a decNumber */ +/* dn is the decNumber to test */ +/* set is the context to use for Emin */ +/* returns 1 if |dn| is finite and >=Nmin, 0 otherwise */ +/* ------------------------------------------------------------------ */ +Int decNumberIsNormal(const decNumber *dn, decContext *set) { + Int ae; /* adjusted exponent */ + #if DECCHECK + if (decCheckOperands(DECUNRESU, DECUNUSED, dn, set)) return 0; + #endif + + if (decNumberIsSpecial(dn)) return 0; /* not finite */ + if (decNumberIsZero(dn)) return 0; /* not non-zero */ + + ae=dn->exponent+dn->digits-1; /* adjusted exponent */ + if (ae<set->emin) return 0; /* is subnormal */ + return 1; + } /* decNumberIsNormal */ + +/* ------------------------------------------------------------------ */ +/* decNumberIsSubnormal -- test subnormality of a decNumber */ +/* dn is the decNumber to test */ +/* set is the context to use for Emin */ +/* returns 1 if |dn| is finite, non-zero, and <Nmin, 0 otherwise */ +/* ------------------------------------------------------------------ */ +Int decNumberIsSubnormal(const decNumber *dn, decContext *set) { + Int ae; /* adjusted exponent */ + #if DECCHECK + if (decCheckOperands(DECUNRESU, DECUNUSED, dn, set)) return 0; + #endif + + if (decNumberIsSpecial(dn)) return 0; /* not finite */ + if (decNumberIsZero(dn)) return 0; /* not non-zero */ + + ae=dn->exponent+dn->digits-1; /* adjusted exponent */ + if (ae<set->emin) return 1; /* is subnormal */ + return 0; + } /* decNumberIsSubnormal */ + +/* ------------------------------------------------------------------ */ +/* decNumberTrim -- remove insignificant zeros */ +/* */ +/* dn is the number to trim */ +/* returns dn */ +/* */ +/* All fields are updated as required. This is a utility operation, */ +/* so special values are unchanged and no error is possible. */ +/* ------------------------------------------------------------------ */ +decNumber * decNumberTrim(decNumber *dn) { + Int dropped; /* work */ + decContext set; /* .. */ + #if DECCHECK + if (decCheckOperands(DECUNRESU, DECUNUSED, dn, DECUNCONT)) return dn; + #endif + decContextDefault(&set, DEC_INIT_BASE); /* clamp=0 */ + return decTrim(dn, &set, 0, &dropped); + } /* decNumberTrim */ + +/* ------------------------------------------------------------------ */ +/* decNumberVersion -- return the name and version of this module */ +/* */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +const char * decNumberVersion(void) { + return DECVERSION; + } /* decNumberVersion */ + +/* ------------------------------------------------------------------ */ +/* decNumberZero -- set a number to 0 */ +/* */ +/* dn is the number to set, with space for one digit */ +/* returns dn */ +/* */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +/* Memset is not used as it is much slower in some environments. */ +decNumber * decNumberZero(decNumber *dn) { + + #if DECCHECK + if (decCheckOperands(dn, DECUNUSED, DECUNUSED, DECUNCONT)) return dn; + #endif + + dn->bits=0; + dn->exponent=0; + dn->digits=1; + dn->lsu[0]=0; + return dn; + } /* decNumberZero */ + +/* ================================================================== */ +/* Local routines */ +/* ================================================================== */ + +/* ------------------------------------------------------------------ */ +/* decToString -- lay out a number into a string */ +/* */ +/* dn is the number to lay out */ +/* string is where to lay out the number */ +/* eng is 1 if Engineering, 0 if Scientific */ +/* */ +/* string must be at least dn->digits+14 characters long */ +/* No error is possible. */ +/* */ +/* Note that this routine can generate a -0 or 0.000. These are */ +/* never generated in subset to-number or arithmetic, but can occur */ +/* in non-subset arithmetic (e.g., -1*0 or 1.234-1.234). */ +/* ------------------------------------------------------------------ */ +/* If DECCHECK is enabled the string "?" is returned if a number is */ +/* invalid. */ +static void decToString(const decNumber *dn, char *string, Flag eng) { + Int exp=dn->exponent; /* local copy */ + Int e; /* E-part value */ + Int pre; /* digits before the '.' */ + Int cut; /* for counting digits in a Unit */ + char *c=string; /* work [output pointer] */ + const Unit *up=dn->lsu+D2U(dn->digits)-1; /* -> msu [input pointer] */ + uInt u, pow; /* work */ + + #if DECCHECK + if (decCheckOperands(DECUNRESU, dn, DECUNUSED, DECUNCONT)) { + strcpy(string, "?"); + return;} + #endif + + if (decNumberIsNegative(dn)) { /* Negatives get a minus */ + *c='-'; + c++; + } + if (dn->bits&DECSPECIAL) { /* Is a special value */ + if (decNumberIsInfinite(dn)) { + strcpy(c, "Inf"); + strcpy(c+3, "inity"); + return;} + /* a NaN */ + if (dn->bits&DECSNAN) { /* signalling NaN */ + *c='s'; + c++; + } + strcpy(c, "NaN"); + c+=3; /* step past */ + /* if not a clean non-zero coefficient, that's all there is in a */ + /* NaN string */ + if (exp!=0 || (*dn->lsu==0 && dn->digits==1)) return; + /* [drop through to add integer] */ + } + + /* calculate how many digits in msu, and hence first cut */ + cut=MSUDIGITS(dn->digits); /* [faster than remainder] */ + cut--; /* power of ten for digit */ + + if (exp==0) { /* simple integer [common fastpath] */ + for (;up>=dn->lsu; up--) { /* each Unit from msu */ + u=*up; /* contains DECDPUN digits to lay out */ + for (; cut>=0; c++, cut--) TODIGIT(u, cut, c, pow); + cut=DECDPUN-1; /* next Unit has all digits */ + } + *c='\0'; /* terminate the string */ + return;} + + /* non-0 exponent -- assume plain form */ + pre=dn->digits+exp; /* digits before '.' */ + e=0; /* no E */ + if ((exp>0) || (pre<-5)) { /* need exponential form */ + e=exp+dn->digits-1; /* calculate E value */ + pre=1; /* assume one digit before '.' */ + if (eng && (e!=0)) { /* engineering: may need to adjust */ + Int adj; /* adjustment */ + /* The C remainder operator is undefined for negative numbers, so */ + /* a positive remainder calculation must be used here */ + if (e<0) { + adj=(-e)%3; + if (adj!=0) adj=3-adj; + } + else { /* e>0 */ + adj=e%3; + } + e=e-adj; + /* if dealing with zero still produce an exponent which is a */ + /* multiple of three, as expected, but there will only be the */ + /* one zero before the E, still. Otherwise note the padding. */ + if (!ISZERO(dn)) pre+=adj; + else { /* is zero */ + if (adj!=0) { /* 0.00Esnn needed */ + e=e+3; + pre=-(2-adj); + } + } /* zero */ + } /* eng */ + } /* need exponent */ + + /* lay out the digits of the coefficient, adding 0s and . as needed */ + u=*up; + if (pre>0) { /* xxx.xxx or xx00 (engineering) form */ + Int n=pre; + for (; pre>0; pre--, c++, cut--) { + if (cut<0) { /* need new Unit */ + if (up==dn->lsu) break; /* out of input digits (pre>digits) */ + up--; + cut=DECDPUN-1; + u=*up; + } + TODIGIT(u, cut, c, pow); + } + if (n<dn->digits) { /* more to come, after '.' */ + *c='.'; c++; + for (;; c++, cut--) { + if (cut<0) { /* need new Unit */ + if (up==dn->lsu) break; /* out of input digits */ + up--; + cut=DECDPUN-1; + u=*up; + } + TODIGIT(u, cut, c, pow); + } + } + else for (; pre>0; pre--, c++) *c='0'; /* 0 padding (for engineering) needed */ + } + else { /* 0.xxx or 0.000xxx form */ + *c='0'; c++; + *c='.'; c++; + for (; pre<0; pre++, c++) *c='0'; /* add any 0's after '.' */ + for (; ; c++, cut--) { + if (cut<0) { /* need new Unit */ + if (up==dn->lsu) break; /* out of input digits */ + up--; + cut=DECDPUN-1; + u=*up; + } + TODIGIT(u, cut, c, pow); + } + } + + /* Finally add the E-part, if needed. It will never be 0, has a + base maximum and minimum of +999999999 through -999999999, but + could range down to -1999999998 for anormal numbers */ + if (e!=0) { + Flag had=0; /* 1=had non-zero */ + *c='E'; c++; + *c='+'; c++; /* assume positive */ + u=e; /* .. */ + if (e<0) { + *(c-1)='-'; /* oops, need - */ + u=-e; /* uInt, please */ + } + /* lay out the exponent [_itoa or equivalent is not ANSI C] */ + for (cut=9; cut>=0; cut--) { + TODIGIT(u, cut, c, pow); + if (*c=='0' && !had) continue; /* skip leading zeros */ + had=1; /* had non-0 */ + c++; /* step for next */ + } /* cut */ + } + *c='\0'; /* terminate the string (all paths) */ + return; + } /* decToString */ + +/* ------------------------------------------------------------------ */ +/* decAddOp -- add/subtract operation */ +/* */ +/* This computes C = A + B */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X+X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* negate is DECNEG if rhs should be negated, or 0 otherwise */ +/* status accumulates status for the caller */ +/* */ +/* C must have space for set->digits digits. */ +/* Inexact in status must be 0 for correct Exact zero sign in result */ +/* ------------------------------------------------------------------ */ +/* If possible, the coefficient is calculated directly into C. */ +/* However, if: */ +/* -- a digits+1 calculation is needed because the numbers are */ +/* unaligned and span more than set->digits digits */ +/* -- a carry to digits+1 digits looks possible */ +/* -- C is the same as A or B, and the result would destructively */ +/* overlap the A or B coefficient */ +/* then the result must be calculated into a temporary buffer. In */ +/* this case a local (stack) buffer is used if possible, and only if */ +/* too long for that does malloc become the final resort. */ +/* */ +/* Misalignment is handled as follows: */ +/* Apad: (AExp>BExp) Swap operands and proceed as for BExp>AExp. */ +/* BPad: Apply the padding by a combination of shifting (whole */ +/* units) and multiplication (part units). */ +/* */ +/* Addition, especially x=x+1, is speed-critical. */ +/* The static buffer is larger than might be expected to allow for */ +/* calls from higher-level funtions (notable exp). */ +/* ------------------------------------------------------------------ */ +static decNumber * decAddOp(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set, + uByte negate, uInt *status) { + #if DECSUBSET + decNumber *alloclhs=NULL; /* non-NULL if rounded lhs allocated */ + decNumber *allocrhs=NULL; /* .., rhs */ + #endif + Int rhsshift; /* working shift (in Units) */ + Int maxdigits; /* longest logical length */ + Int mult; /* multiplier */ + Int residue; /* rounding accumulator */ + uByte bits; /* result bits */ + Flag diffsign; /* non-0 if arguments have different sign */ + Unit *acc; /* accumulator for result */ + Unit accbuff[SD2U(DECBUFFER*2+20)]; /* local buffer [*2+20 reduces many */ + /* allocations when called from */ + /* other operations, notable exp] */ + Unit *allocacc=NULL; /* -> allocated acc buffer, iff allocated */ + Int reqdigits=set->digits; /* local copy; requested DIGITS */ + Int padding; /* work */ + + #if DECCHECK + if (decCheckOperands(res, lhs, rhs, set)) return res; + #endif + + do { /* protect allocated storage */ + #if DECSUBSET + if (!set->extended) { + /* reduce operands and set lostDigits status, as needed */ + if (lhs->digits>reqdigits) { + alloclhs=decRoundOperand(lhs, set, status); + if (alloclhs==NULL) break; + lhs=alloclhs; + } + if (rhs->digits>reqdigits) { + allocrhs=decRoundOperand(rhs, set, status); + if (allocrhs==NULL) break; + rhs=allocrhs; + } + } + #endif + /* [following code does not require input rounding] */ + + /* note whether signs differ [used all paths] */ + diffsign=(Flag)((lhs->bits^rhs->bits^negate)&DECNEG); + + /* handle infinities and NaNs */ + if (SPECIALARGS) { /* a special bit set */ + if (SPECIALARGS & (DECSNAN | DECNAN)) /* a NaN */ + decNaNs(res, lhs, rhs, set, status); + else { /* one or two infinities */ + if (decNumberIsInfinite(lhs)) { /* LHS is infinity */ + /* two infinities with different signs is invalid */ + if (decNumberIsInfinite(rhs) && diffsign) { + *status|=DEC_Invalid_operation; + break; + } + bits=lhs->bits & DECNEG; /* get sign from LHS */ + } + else bits=(rhs->bits^negate) & DECNEG;/* RHS must be Infinity */ + bits|=DECINF; + decNumberZero(res); + res->bits=bits; /* set +/- infinity */ + } /* an infinity */ + break; + } + + /* Quick exit for add 0s; return the non-0, modified as need be */ + if (ISZERO(lhs)) { + Int adjust; /* work */ + Int lexp=lhs->exponent; /* save in case LHS==RES */ + bits=lhs->bits; /* .. */ + residue=0; /* clear accumulator */ + decCopyFit(res, rhs, set, &residue, status); /* copy (as needed) */ + res->bits^=negate; /* flip if rhs was negated */ + #if DECSUBSET + if (set->extended) { /* exponents on zeros count */ + #endif + /* exponent will be the lower of the two */ + adjust=lexp-res->exponent; /* adjustment needed [if -ve] */ + if (ISZERO(res)) { /* both 0: special IEEE 854 rules */ + if (adjust<0) res->exponent=lexp; /* set exponent */ + /* 0-0 gives +0 unless rounding to -infinity, and -0-0 gives -0 */ + if (diffsign) { + if (set->round!=DEC_ROUND_FLOOR) res->bits=0; + else res->bits=DECNEG; /* preserve 0 sign */ + } + } + else { /* non-0 res */ + if (adjust<0) { /* 0-padding needed */ + if ((res->digits-adjust)>set->digits) { + adjust=res->digits-set->digits; /* to fit exactly */ + *status|=DEC_Rounded; /* [but exact] */ + } + res->digits=decShiftToMost(res->lsu, res->digits, -adjust); + res->exponent+=adjust; /* set the exponent. */ + } + } /* non-0 res */ + #if DECSUBSET + } /* extended */ + #endif + decFinish(res, set, &residue, status); /* clean and finalize */ + break;} + + if (ISZERO(rhs)) { /* [lhs is non-zero] */ + Int adjust; /* work */ + Int rexp=rhs->exponent; /* save in case RHS==RES */ + bits=rhs->bits; /* be clean */ + residue=0; /* clear accumulator */ + decCopyFit(res, lhs, set, &residue, status); /* copy (as needed) */ + #if DECSUBSET + if (set->extended) { /* exponents on zeros count */ + #endif + /* exponent will be the lower of the two */ + /* [0-0 case handled above] */ + adjust=rexp-res->exponent; /* adjustment needed [if -ve] */ + if (adjust<0) { /* 0-padding needed */ + if ((res->digits-adjust)>set->digits) { + adjust=res->digits-set->digits; /* to fit exactly */ + *status|=DEC_Rounded; /* [but exact] */ + } + res->digits=decShiftToMost(res->lsu, res->digits, -adjust); + res->exponent+=adjust; /* set the exponent. */ + } + #if DECSUBSET + } /* extended */ + #endif + decFinish(res, set, &residue, status); /* clean and finalize */ + break;} + + /* [NB: both fastpath and mainpath code below assume these cases */ + /* (notably 0-0) have already been handled] */ + + /* calculate the padding needed to align the operands */ + padding=rhs->exponent-lhs->exponent; + + /* Fastpath cases where the numbers are aligned and normal, the RHS */ + /* is all in one unit, no operand rounding is needed, and no carry, */ + /* lengthening, or borrow is needed */ + if (padding==0 + && rhs->digits<=DECDPUN + && rhs->exponent>=set->emin /* [some normals drop through] */ + && rhs->exponent<=set->emax-set->digits+1 /* [could clamp] */ + && rhs->digits<=reqdigits + && lhs->digits<=reqdigits) { + Int partial=*lhs->lsu; + if (!diffsign) { /* adding */ + partial+=*rhs->lsu; + if ((partial<=DECDPUNMAX) /* result fits in unit */ + && (lhs->digits>=DECDPUN || /* .. and no digits-count change */ + partial<(Int)powers[lhs->digits])) { /* .. */ + if (res!=lhs) decNumberCopy(res, lhs); /* not in place */ + *res->lsu=(Unit)partial; /* [copy could have overwritten RHS] */ + break; + } + /* else drop out for careful add */ + } + else { /* signs differ */ + partial-=*rhs->lsu; + if (partial>0) { /* no borrow needed, and non-0 result */ + if (res!=lhs) decNumberCopy(res, lhs); /* not in place */ + *res->lsu=(Unit)partial; + /* this could have reduced digits [but result>0] */ + res->digits=decGetDigits(res->lsu, D2U(res->digits)); + break; + } + /* else drop out for careful subtract */ + } + } + + /* Now align (pad) the lhs or rhs so they can be added or */ + /* subtracted, as necessary. If one number is much larger than */ + /* the other (that is, if in plain form there is a least one */ + /* digit between the lowest digit of one and the highest of the */ + /* other) padding with up to DIGITS-1 trailing zeros may be */ + /* needed; then apply rounding (as exotic rounding modes may be */ + /* affected by the residue). */ + rhsshift=0; /* rhs shift to left (padding) in Units */ + bits=lhs->bits; /* assume sign is that of LHS */ + mult=1; /* likely multiplier */ + + /* [if padding==0 the operands are aligned; no padding is needed] */ + if (padding!=0) { + /* some padding needed; always pad the RHS, as any required */ + /* padding can then be effected by a simple combination of */ + /* shifts and a multiply */ + Flag swapped=0; + if (padding<0) { /* LHS needs the padding */ + const decNumber *t; + padding=-padding; /* will be +ve */ + bits=(uByte)(rhs->bits^negate); /* assumed sign is now that of RHS */ + t=lhs; lhs=rhs; rhs=t; + swapped=1; + } + + /* If, after pad, rhs would be longer than lhs by digits+1 or */ + /* more then lhs cannot affect the answer, except as a residue, */ + /* so only need to pad up to a length of DIGITS+1. */ + if (rhs->digits+padding > lhs->digits+reqdigits+1) { + /* The RHS is sufficient */ + /* for residue use the relative sign indication... */ + Int shift=reqdigits-rhs->digits; /* left shift needed */ + residue=1; /* residue for rounding */ + if (diffsign) residue=-residue; /* signs differ */ + /* copy, shortening if necessary */ + decCopyFit(res, rhs, set, &residue, status); + /* if it was already shorter, then need to pad with zeros */ + if (shift>0) { + res->digits=decShiftToMost(res->lsu, res->digits, shift); + res->exponent-=shift; /* adjust the exponent. */ + } + /* flip the result sign if unswapped and rhs was negated */ + if (!swapped) res->bits^=negate; + decFinish(res, set, &residue, status); /* done */ + break;} + + /* LHS digits may affect result */ + rhsshift=D2U(padding+1)-1; /* this much by Unit shift .. */ + mult=powers[padding-(rhsshift*DECDPUN)]; /* .. this by multiplication */ + } /* padding needed */ + + if (diffsign) mult=-mult; /* signs differ */ + + /* determine the longer operand */ + maxdigits=rhs->digits+padding; /* virtual length of RHS */ + if (lhs->digits>maxdigits) maxdigits=lhs->digits; + + /* Decide on the result buffer to use; if possible place directly */ + /* into result. */ + acc=res->lsu; /* assume add direct to result */ + /* If destructive overlap, or the number is too long, or a carry or */ + /* borrow to DIGITS+1 might be possible, a buffer must be used. */ + /* [Might be worth more sophisticated tests when maxdigits==reqdigits] */ + if ((maxdigits>=reqdigits) /* is, or could be, too large */ + || (res==rhs && rhsshift>0)) { /* destructive overlap */ + /* buffer needed, choose it; units for maxdigits digits will be */ + /* needed, +1 Unit for carry or borrow */ + Int need=D2U(maxdigits)+1; + acc=accbuff; /* assume use local buffer */ + if (need*sizeof(Unit)>sizeof(accbuff)) { + /* printf("malloc add %ld %ld\n", need, sizeof(accbuff)); */ + allocacc=(Unit *)malloc(need*sizeof(Unit)); + if (allocacc==NULL) { /* hopeless -- abandon */ + *status|=DEC_Insufficient_storage; + break;} + acc=allocacc; + } + } + + res->bits=(uByte)(bits&DECNEG); /* it's now safe to overwrite.. */ + res->exponent=lhs->exponent; /* .. operands (even if aliased) */ + + #if DECTRACE + decDumpAr('A', lhs->lsu, D2U(lhs->digits)); + decDumpAr('B', rhs->lsu, D2U(rhs->digits)); + printf(" :h: %ld %ld\n", rhsshift, mult); + #endif + + /* add [A+B*m] or subtract [A+B*(-m)] */ + res->digits=decUnitAddSub(lhs->lsu, D2U(lhs->digits), + rhs->lsu, D2U(rhs->digits), + rhsshift, acc, mult) + *DECDPUN; /* [units -> digits] */ + if (res->digits<0) { /* borrowed... */ + res->digits=-res->digits; + res->bits^=DECNEG; /* flip the sign */ + } + #if DECTRACE + decDumpAr('+', acc, D2U(res->digits)); + #endif + + /* If a buffer was used the result must be copied back, possibly */ + /* shortening. (If no buffer was used then the result must have */ + /* fit, so can't need rounding and residue must be 0.) */ + residue=0; /* clear accumulator */ + if (acc!=res->lsu) { + #if DECSUBSET + if (set->extended) { /* round from first significant digit */ + #endif + /* remove leading zeros that were added due to rounding up to */ + /* integral Units -- before the test for rounding. */ + if (res->digits>reqdigits) + res->digits=decGetDigits(acc, D2U(res->digits)); + decSetCoeff(res, set, acc, res->digits, &residue, status); + #if DECSUBSET + } + else { /* subset arithmetic rounds from original significant digit */ + /* May have an underestimate. This only occurs when both */ + /* numbers fit in DECDPUN digits and are padding with a */ + /* negative multiple (-10, -100...) and the top digit(s) become */ + /* 0. (This only matters when using X3.274 rules where the */ + /* leading zero could be included in the rounding.) */ + if (res->digits<maxdigits) { + *(acc+D2U(res->digits))=0; /* ensure leading 0 is there */ + res->digits=maxdigits; + } + else { + /* remove leading zeros that added due to rounding up to */ + /* integral Units (but only those in excess of the original */ + /* maxdigits length, unless extended) before test for rounding. */ + if (res->digits>reqdigits) { + res->digits=decGetDigits(acc, D2U(res->digits)); + if (res->digits<maxdigits) res->digits=maxdigits; + } + } + decSetCoeff(res, set, acc, res->digits, &residue, status); + /* Now apply rounding if needed before removing leading zeros. */ + /* This is safe because subnormals are not a possibility */ + if (residue!=0) { + decApplyRound(res, set, residue, status); + residue=0; /* did what needed to be done */ + } + } /* subset */ + #endif + } /* used buffer */ + + /* strip leading zeros [these were left on in case of subset subtract] */ + res->digits=decGetDigits(res->lsu, D2U(res->digits)); + + /* apply checks and rounding */ + decFinish(res, set, &residue, status); + + /* "When the sum of two operands with opposite signs is exactly */ + /* zero, the sign of that sum shall be '+' in all rounding modes */ + /* except round toward -Infinity, in which mode that sign shall be */ + /* '-'." [Subset zeros also never have '-', set by decFinish.] */ + if (ISZERO(res) && diffsign + #if DECSUBSET + && set->extended + #endif + && (*status&DEC_Inexact)==0) { + if (set->round==DEC_ROUND_FLOOR) res->bits|=DECNEG; /* sign - */ + else res->bits&=~DECNEG; /* sign + */ + } + } while(0); /* end protected */ + + if (allocacc!=NULL) free(allocacc); /* drop any storage used */ + #if DECSUBSET + if (allocrhs!=NULL) free(allocrhs); /* .. */ + if (alloclhs!=NULL) free(alloclhs); /* .. */ + #endif + return res; + } /* decAddOp */ + +/* ------------------------------------------------------------------ */ +/* decDivideOp -- division operation */ +/* */ +/* This routine performs the calculations for all four division */ +/* operators (divide, divideInteger, remainder, remainderNear). */ +/* */ +/* C=A op B */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X/X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* op is DIVIDE, DIVIDEINT, REMAINDER, or REMNEAR respectively. */ +/* status is the usual accumulator */ +/* */ +/* C must have space for set->digits digits. */ +/* */ +/* ------------------------------------------------------------------ */ +/* The underlying algorithm of this routine is the same as in the */ +/* 1981 S/370 implementation, that is, non-restoring long division */ +/* with bi-unit (rather than bi-digit) estimation for each unit */ +/* multiplier. In this pseudocode overview, complications for the */ +/* Remainder operators and division residues for exact rounding are */ +/* omitted for clarity. */ +/* */ +/* Prepare operands and handle special values */ +/* Test for x/0 and then 0/x */ +/* Exp =Exp1 - Exp2 */ +/* Exp =Exp +len(var1) -len(var2) */ +/* Sign=Sign1 * Sign2 */ +/* Pad accumulator (Var1) to double-length with 0's (pad1) */ +/* Pad Var2 to same length as Var1 */ +/* msu2pair/plus=1st 2 or 1 units of var2, +1 to allow for round */ +/* have=0 */ +/* Do until (have=digits+1 OR residue=0) */ +/* if exp<0 then if integer divide/residue then leave */ +/* this_unit=0 */ +/* Do forever */ +/* compare numbers */ +/* if <0 then leave inner_loop */ +/* if =0 then (* quick exit without subtract *) do */ +/* this_unit=this_unit+1; output this_unit */ +/* leave outer_loop; end */ +/* Compare lengths of numbers (mantissae): */ +/* If same then tops2=msu2pair -- {units 1&2 of var2} */ +/* else tops2=msu2plus -- {0, unit 1 of var2} */ +/* tops1=first_unit_of_Var1*10**DECDPUN +second_unit_of_var1 */ +/* mult=tops1/tops2 -- Good and safe guess at divisor */ +/* if mult=0 then mult=1 */ +/* this_unit=this_unit+mult */ +/* subtract */ +/* end inner_loop */ +/* if have\=0 | this_unit\=0 then do */ +/* output this_unit */ +/* have=have+1; end */ +/* var2=var2/10 */ +/* exp=exp-1 */ +/* end outer_loop */ +/* exp=exp+1 -- set the proper exponent */ +/* if have=0 then generate answer=0 */ +/* Return (Result is defined by Var1) */ +/* */ +/* ------------------------------------------------------------------ */ +/* Two working buffers are needed during the division; one (digits+ */ +/* 1) to accumulate the result, and the other (up to 2*digits+1) for */ +/* long subtractions. These are acc and var1 respectively. */ +/* var1 is a copy of the lhs coefficient, var2 is the rhs coefficient.*/ +/* The static buffers may be larger than might be expected to allow */ +/* for calls from higher-level funtions (notable exp). */ +/* ------------------------------------------------------------------ */ +static decNumber * decDivideOp(decNumber *res, + const decNumber *lhs, const decNumber *rhs, + decContext *set, Flag op, uInt *status) { + #if DECSUBSET + decNumber *alloclhs=NULL; /* non-NULL if rounded lhs allocated */ + decNumber *allocrhs=NULL; /* .., rhs */ + #endif + Unit accbuff[SD2U(DECBUFFER+DECDPUN+10)]; /* local buffer */ + Unit *acc=accbuff; /* -> accumulator array for result */ + Unit *allocacc=NULL; /* -> allocated buffer, iff allocated */ + Unit *accnext; /* -> where next digit will go */ + Int acclength; /* length of acc needed [Units] */ + Int accunits; /* count of units accumulated */ + Int accdigits; /* count of digits accumulated */ + + Unit varbuff[SD2U(DECBUFFER*2+DECDPUN)*sizeof(Unit)]; /* buffer for var1 */ + Unit *var1=varbuff; /* -> var1 array for long subtraction */ + Unit *varalloc=NULL; /* -> allocated buffer, iff used */ + Unit *msu1; /* -> msu of var1 */ + + const Unit *var2; /* -> var2 array */ + const Unit *msu2; /* -> msu of var2 */ + Int msu2plus; /* msu2 plus one [does not vary] */ + eInt msu2pair; /* msu2 pair plus one [does not vary] */ + + Int var1units, var2units; /* actual lengths */ + Int var2ulen; /* logical length (units) */ + Int var1initpad=0; /* var1 initial padding (digits) */ + Int maxdigits; /* longest LHS or required acc length */ + Int mult; /* multiplier for subtraction */ + Unit thisunit; /* current unit being accumulated */ + Int residue; /* for rounding */ + Int reqdigits=set->digits; /* requested DIGITS */ + Int exponent; /* working exponent */ + Int maxexponent=0; /* DIVIDE maximum exponent if unrounded */ + uByte bits; /* working sign */ + Unit *target; /* work */ + const Unit *source; /* .. */ + uInt const *pow; /* .. */ + Int shift, cut; /* .. */ + #if DECSUBSET + Int dropped; /* work */ + #endif + + #if DECCHECK + if (decCheckOperands(res, lhs, rhs, set)) return res; + #endif + + do { /* protect allocated storage */ + #if DECSUBSET + if (!set->extended) { + /* reduce operands and set lostDigits status, as needed */ + if (lhs->digits>reqdigits) { + alloclhs=decRoundOperand(lhs, set, status); + if (alloclhs==NULL) break; + lhs=alloclhs; + } + if (rhs->digits>reqdigits) { + allocrhs=decRoundOperand(rhs, set, status); + if (allocrhs==NULL) break; + rhs=allocrhs; + } + } + #endif + /* [following code does not require input rounding] */ + + bits=(lhs->bits^rhs->bits)&DECNEG; /* assumed sign for divisions */ + + /* handle infinities and NaNs */ + if (SPECIALARGS) { /* a special bit set */ + if (SPECIALARGS & (DECSNAN | DECNAN)) { /* one or two NaNs */ + decNaNs(res, lhs, rhs, set, status); + break; + } + /* one or two infinities */ + if (decNumberIsInfinite(lhs)) { /* LHS (dividend) is infinite */ + if (decNumberIsInfinite(rhs) || /* two infinities are invalid .. */ + op & (REMAINDER | REMNEAR)) { /* as is remainder of infinity */ + *status|=DEC_Invalid_operation; + break; + } + /* [Note that infinity/0 raises no exceptions] */ + decNumberZero(res); + res->bits=bits|DECINF; /* set +/- infinity */ + break; + } + else { /* RHS (divisor) is infinite */ + residue=0; + if (op&(REMAINDER|REMNEAR)) { + /* result is [finished clone of] lhs */ + decCopyFit(res, lhs, set, &residue, status); + } + else { /* a division */ + decNumberZero(res); + res->bits=bits; /* set +/- zero */ + /* for DIVIDEINT the exponent is always 0. For DIVIDE, result */ + /* is a 0 with infinitely negative exponent, clamped to minimum */ + if (op&DIVIDE) { + res->exponent=set->emin-set->digits+1; + *status|=DEC_Clamped; + } + } + decFinish(res, set, &residue, status); + break; + } + } + + /* handle 0 rhs (x/0) */ + if (ISZERO(rhs)) { /* x/0 is always exceptional */ + if (ISZERO(lhs)) { + decNumberZero(res); /* [after lhs test] */ + *status|=DEC_Division_undefined;/* 0/0 will become NaN */ + } + else { + decNumberZero(res); + if (op&(REMAINDER|REMNEAR)) *status|=DEC_Invalid_operation; + else { + *status|=DEC_Division_by_zero; /* x/0 */ + res->bits=bits|DECINF; /* .. is +/- Infinity */ + } + } + break;} + + /* handle 0 lhs (0/x) */ + if (ISZERO(lhs)) { /* 0/x [x!=0] */ + #if DECSUBSET + if (!set->extended) decNumberZero(res); + else { + #endif + if (op&DIVIDE) { + residue=0; + exponent=lhs->exponent-rhs->exponent; /* ideal exponent */ + decNumberCopy(res, lhs); /* [zeros always fit] */ + res->bits=bits; /* sign as computed */ + res->exponent=exponent; /* exponent, too */ + decFinalize(res, set, &residue, status); /* check exponent */ + } + else if (op&DIVIDEINT) { + decNumberZero(res); /* integer 0 */ + res->bits=bits; /* sign as computed */ + } + else { /* a remainder */ + exponent=rhs->exponent; /* [save in case overwrite] */ + decNumberCopy(res, lhs); /* [zeros always fit] */ + if (exponent<res->exponent) res->exponent=exponent; /* use lower */ + } + #if DECSUBSET + } + #endif + break;} + + /* Precalculate exponent. This starts off adjusted (and hence fits */ + /* in 31 bits) and becomes the usual unadjusted exponent as the */ + /* division proceeds. The order of evaluation is important, here, */ + /* to avoid wrap. */ + exponent=(lhs->exponent+lhs->digits)-(rhs->exponent+rhs->digits); + + /* If the working exponent is -ve, then some quick exits are */ + /* possible because the quotient is known to be <1 */ + /* [for REMNEAR, it needs to be < -1, as -0.5 could need work] */ + if (exponent<0 && !(op==DIVIDE)) { + if (op&DIVIDEINT) { + decNumberZero(res); /* integer part is 0 */ + #if DECSUBSET + if (set->extended) + #endif + res->bits=bits; /* set +/- zero */ + break;} + /* fastpath remainders so long as the lhs has the smaller */ + /* (or equal) exponent */ + if (lhs->exponent<=rhs->exponent) { + if (op&REMAINDER || exponent<-1) { + /* It is REMAINDER or safe REMNEAR; result is [finished */ + /* clone of] lhs (r = x - 0*y) */ + residue=0; + decCopyFit(res, lhs, set, &residue, status); + decFinish(res, set, &residue, status); + break; + } + /* [unsafe REMNEAR drops through] */ + } + } /* fastpaths */ + + /* Long (slow) division is needed; roll up the sleeves... */ + + /* The accumulator will hold the quotient of the division. */ + /* If it needs to be too long for stack storage, then allocate. */ + acclength=D2U(reqdigits+DECDPUN); /* in Units */ + if (acclength*sizeof(Unit)>sizeof(accbuff)) { + /* printf("malloc dvacc %ld units\n", acclength); */ + allocacc=(Unit *)malloc(acclength*sizeof(Unit)); + if (allocacc==NULL) { /* hopeless -- abandon */ + *status|=DEC_Insufficient_storage; + break;} + acc=allocacc; /* use the allocated space */ + } + + /* var1 is the padded LHS ready for subtractions. */ + /* If it needs to be too long for stack storage, then allocate. */ + /* The maximum units needed for var1 (long subtraction) is: */ + /* Enough for */ + /* (rhs->digits+reqdigits-1) -- to allow full slide to right */ + /* or (lhs->digits) -- to allow for long lhs */ + /* whichever is larger */ + /* +1 -- for rounding of slide to right */ + /* +1 -- for leading 0s */ + /* +1 -- for pre-adjust if a remainder or DIVIDEINT */ + /* [Note: unused units do not participate in decUnitAddSub data] */ + maxdigits=rhs->digits+reqdigits-1; + if (lhs->digits>maxdigits) maxdigits=lhs->digits; + var1units=D2U(maxdigits)+2; + /* allocate a guard unit above msu1 for REMAINDERNEAR */ + if (!(op&DIVIDE)) var1units++; + if ((var1units+1)*sizeof(Unit)>sizeof(varbuff)) { + /* printf("malloc dvvar %ld units\n", var1units+1); */ + varalloc=(Unit *)malloc((var1units+1)*sizeof(Unit)); + if (varalloc==NULL) { /* hopeless -- abandon */ + *status|=DEC_Insufficient_storage; + break;} + var1=varalloc; /* use the allocated space */ + } + + /* Extend the lhs and rhs to full long subtraction length. The lhs */ + /* is truly extended into the var1 buffer, with 0 padding, so a */ + /* subtract in place is always possible. The rhs (var2) has */ + /* virtual padding (implemented by decUnitAddSub). */ + /* One guard unit was allocated above msu1 for rem=rem+rem in */ + /* REMAINDERNEAR. */ + msu1=var1+var1units-1; /* msu of var1 */ + source=lhs->lsu+D2U(lhs->digits)-1; /* msu of input array */ + for (target=msu1; source>=lhs->lsu; source--, target--) *target=*source; + for (; target>=var1; target--) *target=0; + + /* rhs (var2) is left-aligned with var1 at the start */ + var2ulen=var1units; /* rhs logical length (units) */ + var2units=D2U(rhs->digits); /* rhs actual length (units) */ + var2=rhs->lsu; /* -> rhs array */ + msu2=var2+var2units-1; /* -> msu of var2 [never changes] */ + /* now set up the variables which will be used for estimating the */ + /* multiplication factor. If these variables are not exact, add */ + /* 1 to make sure that the multiplier is never overestimated. */ + msu2plus=*msu2; /* it's value .. */ + if (var2units>1) msu2plus++; /* .. +1 if any more */ + msu2pair=(eInt)*msu2*(DECDPUNMAX+1);/* top two pair .. */ + if (var2units>1) { /* .. [else treat 2nd as 0] */ + msu2pair+=*(msu2-1); /* .. */ + if (var2units>2) msu2pair++; /* .. +1 if any more */ + } + + /* The calculation is working in units, which may have leading zeros, */ + /* but the exponent was calculated on the assumption that they are */ + /* both left-aligned. Adjust the exponent to compensate: add the */ + /* number of leading zeros in var1 msu and subtract those in var2 msu. */ + /* [This is actually done by counting the digits and negating, as */ + /* lead1=DECDPUN-digits1, and similarly for lead2.] */ + for (pow=&powers[1]; *msu1>=*pow; pow++) exponent--; + for (pow=&powers[1]; *msu2>=*pow; pow++) exponent++; + + /* Now, if doing an integer divide or remainder, ensure that */ + /* the result will be Unit-aligned. To do this, shift the var1 */ + /* accumulator towards least if need be. (It's much easier to */ + /* do this now than to reassemble the residue afterwards, if */ + /* doing a remainder.) Also ensure the exponent is not negative. */ + if (!(op&DIVIDE)) { + Unit *u; /* work */ + /* save the initial 'false' padding of var1, in digits */ + var1initpad=(var1units-D2U(lhs->digits))*DECDPUN; + /* Determine the shift to do. */ + if (exponent<0) cut=-exponent; + else cut=DECDPUN-exponent%DECDPUN; + decShiftToLeast(var1, var1units, cut); + exponent+=cut; /* maintain numerical value */ + var1initpad-=cut; /* .. and reduce padding */ + /* clean any most-significant units which were just emptied */ + for (u=msu1; cut>=DECDPUN; cut-=DECDPUN, u--) *u=0; + } /* align */ + else { /* is DIVIDE */ + maxexponent=lhs->exponent-rhs->exponent; /* save */ + /* optimization: if the first iteration will just produce 0, */ + /* preadjust to skip it [valid for DIVIDE only] */ + if (*msu1<*msu2) { + var2ulen--; /* shift down */ + exponent-=DECDPUN; /* update the exponent */ + } + } + + /* ---- start the long-division loops ------------------------------ */ + accunits=0; /* no units accumulated yet */ + accdigits=0; /* .. or digits */ + accnext=acc+acclength-1; /* -> msu of acc [NB: allows digits+1] */ + for (;;) { /* outer forever loop */ + thisunit=0; /* current unit assumed 0 */ + /* find the next unit */ + for (;;) { /* inner forever loop */ + /* strip leading zero units [from either pre-adjust or from */ + /* subtract last time around]. Leave at least one unit. */ + for (; *msu1==0 && msu1>var1; msu1--) var1units--; + + if (var1units<var2ulen) break; /* var1 too low for subtract */ + if (var1units==var2ulen) { /* unit-by-unit compare needed */ + /* compare the two numbers, from msu */ + const Unit *pv1, *pv2; + Unit v2; /* units to compare */ + pv2=msu2; /* -> msu */ + for (pv1=msu1; ; pv1--, pv2--) { + /* v1=*pv1 -- always OK */ + v2=0; /* assume in padding */ + if (pv2>=var2) v2=*pv2; /* in range */ + if (*pv1!=v2) break; /* no longer the same */ + if (pv1==var1) break; /* done; leave pv1 as is */ + } + /* here when all inspected or a difference seen */ + if (*pv1<v2) break; /* var1 too low to subtract */ + if (*pv1==v2) { /* var1 == var2 */ + /* reach here if var1 and var2 are identical; subtraction */ + /* would increase digit by one, and the residue will be 0 so */ + /* the calculation is done; leave the loop with residue=0. */ + thisunit++; /* as though subtracted */ + *var1=0; /* set var1 to 0 */ + var1units=1; /* .. */ + break; /* from inner */ + } /* var1 == var2 */ + /* *pv1>v2. Prepare for real subtraction; the lengths are equal */ + /* Estimate the multiplier (there's always a msu1-1)... */ + /* Bring in two units of var2 to provide a good estimate. */ + mult=(Int)(((eInt)*msu1*(DECDPUNMAX+1)+*(msu1-1))/msu2pair); + } /* lengths the same */ + else { /* var1units > var2ulen, so subtraction is safe */ + /* The var2 msu is one unit towards the lsu of the var1 msu, */ + /* so only one unit for var2 can be used. */ + mult=(Int)(((eInt)*msu1*(DECDPUNMAX+1)+*(msu1-1))/msu2plus); + } + if (mult==0) mult=1; /* must always be at least 1 */ + /* subtraction needed; var1 is > var2 */ + thisunit=(Unit)(thisunit+mult); /* accumulate */ + /* subtract var1-var2, into var1; only the overlap needs */ + /* processing, as this is an in-place calculation */ + shift=var2ulen-var2units; + #if DECTRACE + decDumpAr('1', &var1[shift], var1units-shift); + decDumpAr('2', var2, var2units); + printf("m=%ld\n", -mult); + #endif + decUnitAddSub(&var1[shift], var1units-shift, + var2, var2units, 0, + &var1[shift], -mult); + #if DECTRACE + decDumpAr('#', &var1[shift], var1units-shift); + #endif + /* var1 now probably has leading zeros; these are removed at the */ + /* top of the inner loop. */ + } /* inner loop */ + + /* The next unit has been calculated in full; unless it's a */ + /* leading zero, add to acc */ + if (accunits!=0 || thisunit!=0) { /* is first or non-zero */ + *accnext=thisunit; /* store in accumulator */ + /* account exactly for the new digits */ + if (accunits==0) { + accdigits++; /* at least one */ + for (pow=&powers[1]; thisunit>=*pow; pow++) accdigits++; + } + else accdigits+=DECDPUN; + accunits++; /* update count */ + accnext--; /* ready for next */ + if (accdigits>reqdigits) break; /* have enough digits */ + } + + /* if the residue is zero, the operation is done (unless divide */ + /* or divideInteger and still not enough digits yet) */ + if (*var1==0 && var1units==1) { /* residue is 0 */ + if (op&(REMAINDER|REMNEAR)) break; + if ((op&DIVIDE) && (exponent<=maxexponent)) break; + /* [drop through if divideInteger] */ + } + /* also done enough if calculating remainder or integer */ + /* divide and just did the last ('units') unit */ + if (exponent==0 && !(op&DIVIDE)) break; + + /* to get here, var1 is less than var2, so divide var2 by the per- */ + /* Unit power of ten and go for the next digit */ + var2ulen--; /* shift down */ + exponent-=DECDPUN; /* update the exponent */ + } /* outer loop */ + + /* ---- division is complete --------------------------------------- */ + /* here: acc has at least reqdigits+1 of good results (or fewer */ + /* if early stop), starting at accnext+1 (its lsu) */ + /* var1 has any residue at the stopping point */ + /* accunits is the number of digits collected in acc */ + if (accunits==0) { /* acc is 0 */ + accunits=1; /* show have a unit .. */ + accdigits=1; /* .. */ + *accnext=0; /* .. whose value is 0 */ + } + else accnext++; /* back to last placed */ + /* accnext now -> lowest unit of result */ + + residue=0; /* assume no residue */ + if (op&DIVIDE) { + /* record the presence of any residue, for rounding */ + if (*var1!=0 || var1units>1) residue=1; + else { /* no residue */ + /* Had an exact division; clean up spurious trailing 0s. */ + /* There will be at most DECDPUN-1, from the final multiply, */ + /* and then only if the result is non-0 (and even) and the */ + /* exponent is 'loose'. */ + #if DECDPUN>1 + Unit lsu=*accnext; + if (!(lsu&0x01) && (lsu!=0)) { + /* count the trailing zeros */ + Int drop=0; + for (;; drop++) { /* [will terminate because lsu!=0] */ + if (exponent>=maxexponent) break; /* don't chop real 0s */ + #if DECDPUN<=4 + if ((lsu-QUOT10(lsu, drop+1) + *powers[drop+1])!=0) break; /* found non-0 digit */ + #else + if (lsu%powers[drop+1]!=0) break; /* found non-0 digit */ + #endif + exponent++; + } + if (drop>0) { + accunits=decShiftToLeast(accnext, accunits, drop); + accdigits=decGetDigits(accnext, accunits); + accunits=D2U(accdigits); + /* [exponent was adjusted in the loop] */ + } + } /* neither odd nor 0 */ + #endif + } /* exact divide */ + } /* divide */ + else /* op!=DIVIDE */ { + /* check for coefficient overflow */ + if (accdigits+exponent>reqdigits) { + *status|=DEC_Division_impossible; + break; + } + if (op & (REMAINDER|REMNEAR)) { + /* [Here, the exponent will be 0, because var1 was adjusted */ + /* appropriately.] */ + Int postshift; /* work */ + Flag wasodd=0; /* integer was odd */ + Unit *quotlsu; /* for save */ + Int quotdigits; /* .. */ + + bits=lhs->bits; /* remainder sign is always as lhs */ + + /* Fastpath when residue is truly 0 is worthwhile [and */ + /* simplifies the code below] */ + if (*var1==0 && var1units==1) { /* residue is 0 */ + Int exp=lhs->exponent; /* save min(exponents) */ + if (rhs->exponent<exp) exp=rhs->exponent; + decNumberZero(res); /* 0 coefficient */ + #if DECSUBSET + if (set->extended) + #endif + res->exponent=exp; /* .. with proper exponent */ + res->bits=(uByte)(bits&DECNEG); /* [cleaned] */ + decFinish(res, set, &residue, status); /* might clamp */ + break; + } + /* note if the quotient was odd */ + if (*accnext & 0x01) wasodd=1; /* acc is odd */ + quotlsu=accnext; /* save in case need to reinspect */ + quotdigits=accdigits; /* .. */ + + /* treat the residue, in var1, as the value to return, via acc */ + /* calculate the unused zero digits. This is the smaller of: */ + /* var1 initial padding (saved above) */ + /* var2 residual padding, which happens to be given by: */ + postshift=var1initpad+exponent-lhs->exponent+rhs->exponent; + /* [the 'exponent' term accounts for the shifts during divide] */ + if (var1initpad<postshift) postshift=var1initpad; + + /* shift var1 the requested amount, and adjust its digits */ + var1units=decShiftToLeast(var1, var1units, postshift); + accnext=var1; + accdigits=decGetDigits(var1, var1units); + accunits=D2U(accdigits); + + exponent=lhs->exponent; /* exponent is smaller of lhs & rhs */ + if (rhs->exponent<exponent) exponent=rhs->exponent; + + /* Now correct the result if doing remainderNear; if it */ + /* (looking just at coefficients) is > rhs/2, or == rhs/2 and */ + /* the integer was odd then the result should be rem-rhs. */ + if (op&REMNEAR) { + Int compare, tarunits; /* work */ + Unit *up; /* .. */ + /* calculate remainder*2 into the var1 buffer (which has */ + /* 'headroom' of an extra unit and hence enough space) */ + /* [a dedicated 'double' loop would be faster, here] */ + tarunits=decUnitAddSub(accnext, accunits, accnext, accunits, + 0, accnext, 1); + /* decDumpAr('r', accnext, tarunits); */ + + /* Here, accnext (var1) holds tarunits Units with twice the */ + /* remainder's coefficient, which must now be compared to the */ + /* RHS. The remainder's exponent may be smaller than the RHS's. */ + compare=decUnitCompare(accnext, tarunits, rhs->lsu, D2U(rhs->digits), + rhs->exponent-exponent); + if (compare==BADINT) { /* deep trouble */ + *status|=DEC_Insufficient_storage; + break;} + + /* now restore the remainder by dividing by two; the lsu */ + /* is known to be even. */ + for (up=accnext; up<accnext+tarunits; up++) { + Int half; /* half to add to lower unit */ + half=*up & 0x01; + *up/=2; /* [shift] */ + if (!half) continue; + *(up-1)+=(DECDPUNMAX+1)/2; + } + /* [accunits still describes the original remainder length] */ + + if (compare>0 || (compare==0 && wasodd)) { /* adjustment needed */ + Int exp, expunits, exprem; /* work */ + /* This is effectively causing round-up of the quotient, */ + /* so if it was the rare case where it was full and all */ + /* nines, it would overflow and hence division-impossible */ + /* should be raised */ + Flag allnines=0; /* 1 if quotient all nines */ + if (quotdigits==reqdigits) { /* could be borderline */ + for (up=quotlsu; ; up++) { + if (quotdigits>DECDPUN) { + if (*up!=DECDPUNMAX) break;/* non-nines */ + } + else { /* this is the last Unit */ + if (*up==powers[quotdigits]-1) allnines=1; + break; + } + quotdigits-=DECDPUN; /* checked those digits */ + } /* up */ + } /* borderline check */ + if (allnines) { + *status|=DEC_Division_impossible; + break;} + + /* rem-rhs is needed; the sign will invert. Again, var1 */ + /* can safely be used for the working Units array. */ + exp=rhs->exponent-exponent; /* RHS padding needed */ + /* Calculate units and remainder from exponent. */ + expunits=exp/DECDPUN; + exprem=exp%DECDPUN; + /* subtract [A+B*(-m)]; the result will always be negative */ + accunits=-decUnitAddSub(accnext, accunits, + rhs->lsu, D2U(rhs->digits), + expunits, accnext, -(Int)powers[exprem]); + accdigits=decGetDigits(accnext, accunits); /* count digits exactly */ + accunits=D2U(accdigits); /* and recalculate the units for copy */ + /* [exponent is as for original remainder] */ + bits^=DECNEG; /* flip the sign */ + } + } /* REMNEAR */ + } /* REMAINDER or REMNEAR */ + } /* not DIVIDE */ + + /* Set exponent and bits */ + res->exponent=exponent; + res->bits=(uByte)(bits&DECNEG); /* [cleaned] */ + + /* Now the coefficient. */ + decSetCoeff(res, set, accnext, accdigits, &residue, status); + + decFinish(res, set, &residue, status); /* final cleanup */ + + #if DECSUBSET + /* If a divide then strip trailing zeros if subset [after round] */ + if (!set->extended && (op==DIVIDE)) decTrim(res, set, 0, &dropped); + #endif + } while(0); /* end protected */ + + if (varalloc!=NULL) free(varalloc); /* drop any storage used */ + if (allocacc!=NULL) free(allocacc); /* .. */ + #if DECSUBSET + if (allocrhs!=NULL) free(allocrhs); /* .. */ + if (alloclhs!=NULL) free(alloclhs); /* .. */ + #endif + return res; + } /* decDivideOp */ + +/* ------------------------------------------------------------------ */ +/* decMultiplyOp -- multiplication operation */ +/* */ +/* This routine performs the multiplication C=A x B. */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X*X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* status is the usual accumulator */ +/* */ +/* C must have space for set->digits digits. */ +/* */ +/* ------------------------------------------------------------------ */ +/* 'Classic' multiplication is used rather than Karatsuba, as the */ +/* latter would give only a minor improvement for the short numbers */ +/* expected to be handled most (and uses much more memory). */ +/* */ +/* There are two major paths here: the general-purpose ('old code') */ +/* path which handles all DECDPUN values, and a fastpath version */ +/* which is used if 64-bit ints are available, DECDPUN<=4, and more */ +/* than two calls to decUnitAddSub would be made. */ +/* */ +/* The fastpath version lumps units together into 8-digit or 9-digit */ +/* chunks, and also uses a lazy carry strategy to minimise expensive */ +/* 64-bit divisions. The chunks are then broken apart again into */ +/* units for continuing processing. Despite this overhead, the */ +/* fastpath can speed up some 16-digit operations by 10x (and much */ +/* more for higher-precision calculations). */ +/* */ +/* A buffer always has to be used for the accumulator; in the */ +/* fastpath, buffers are also always needed for the chunked copies of */ +/* of the operand coefficients. */ +/* Static buffers are larger than needed just for multiply, to allow */ +/* for calls from other operations (notably exp). */ +/* ------------------------------------------------------------------ */ +#define FASTMUL (DECUSE64 && DECDPUN<5) +static decNumber * decMultiplyOp(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set, + uInt *status) { + Int accunits; /* Units of accumulator in use */ + Int exponent; /* work */ + Int residue=0; /* rounding residue */ + uByte bits; /* result sign */ + Unit *acc; /* -> accumulator Unit array */ + Int needbytes; /* size calculator */ + void *allocacc=NULL; /* -> allocated accumulator, iff allocated */ + Unit accbuff[SD2U(DECBUFFER*4+1)]; /* buffer (+1 for DECBUFFER==0, */ + /* *4 for calls from other operations) */ + const Unit *mer, *mermsup; /* work */ + Int madlength; /* Units in multiplicand */ + Int shift; /* Units to shift multiplicand by */ + + #if FASTMUL + /* if DECDPUN is 1 or 3 work in base 10**9, otherwise */ + /* (DECDPUN is 2 or 4) then work in base 10**8 */ + #if DECDPUN & 1 /* odd */ + #define FASTBASE 1000000000 /* base */ + #define FASTDIGS 9 /* digits in base */ + #define FASTLAZY 18 /* carry resolution point [1->18] */ + #else + #define FASTBASE 100000000 + #define FASTDIGS 8 + #define FASTLAZY 1844 /* carry resolution point [1->1844] */ + #endif + /* three buffers are used, two for chunked copies of the operands */ + /* (base 10**8 or base 10**9) and one base 2**64 accumulator with */ + /* lazy carry evaluation */ + uInt zlhibuff[(DECBUFFER*2+1)/8+1]; /* buffer (+1 for DECBUFFER==0) */ + uInt *zlhi=zlhibuff; /* -> lhs array */ + uInt *alloclhi=NULL; /* -> allocated buffer, iff allocated */ + uInt zrhibuff[(DECBUFFER*2+1)/8+1]; /* buffer (+1 for DECBUFFER==0) */ + uInt *zrhi=zrhibuff; /* -> rhs array */ + uInt *allocrhi=NULL; /* -> allocated buffer, iff allocated */ + uLong zaccbuff[(DECBUFFER*2+1)/4+2]; /* buffer (+1 for DECBUFFER==0) */ + /* [allocacc is shared for both paths, as only one will run] */ + uLong *zacc=zaccbuff; /* -> accumulator array for exact result */ + #if DECDPUN==1 + Int zoff; /* accumulator offset */ + #endif + uInt *lip, *rip; /* item pointers */ + uInt *lmsi, *rmsi; /* most significant items */ + Int ilhs, irhs, iacc; /* item counts in the arrays */ + Int lazy; /* lazy carry counter */ + uLong lcarry; /* uLong carry */ + uInt carry; /* carry (NB not uLong) */ + Int count; /* work */ + const Unit *cup; /* .. */ + Unit *up; /* .. */ + uLong *lp; /* .. */ + Int p; /* .. */ + #endif + + #if DECSUBSET + decNumber *alloclhs=NULL; /* -> allocated buffer, iff allocated */ + decNumber *allocrhs=NULL; /* -> allocated buffer, iff allocated */ + #endif + + #if DECCHECK + if (decCheckOperands(res, lhs, rhs, set)) return res; + #endif + + /* precalculate result sign */ + bits=(uByte)((lhs->bits^rhs->bits)&DECNEG); + + /* handle infinities and NaNs */ + if (SPECIALARGS) { /* a special bit set */ + if (SPECIALARGS & (DECSNAN | DECNAN)) { /* one or two NaNs */ + decNaNs(res, lhs, rhs, set, status); + return res;} + /* one or two infinities; Infinity * 0 is invalid */ + if (((lhs->bits & DECINF)==0 && ISZERO(lhs)) + ||((rhs->bits & DECINF)==0 && ISZERO(rhs))) { + *status|=DEC_Invalid_operation; + return res;} + decNumberZero(res); + res->bits=bits|DECINF; /* infinity */ + return res;} + + /* For best speed, as in DMSRCN [the original Rexx numerics */ + /* module], use the shorter number as the multiplier (rhs) and */ + /* the longer as the multiplicand (lhs) to minimise the number of */ + /* adds (partial products) */ + if (lhs->digits<rhs->digits) { /* swap... */ + const decNumber *hold=lhs; + lhs=rhs; + rhs=hold; + } + + do { /* protect allocated storage */ + #if DECSUBSET + if (!set->extended) { + /* reduce operands and set lostDigits status, as needed */ + if (lhs->digits>set->digits) { + alloclhs=decRoundOperand(lhs, set, status); + if (alloclhs==NULL) break; + lhs=alloclhs; + } + if (rhs->digits>set->digits) { + allocrhs=decRoundOperand(rhs, set, status); + if (allocrhs==NULL) break; + rhs=allocrhs; + } + } + #endif + /* [following code does not require input rounding] */ + + #if FASTMUL /* fastpath can be used */ + /* use the fast path if there are enough digits in the shorter */ + /* operand to make the setup and takedown worthwhile */ + #define NEEDTWO (DECDPUN*2) /* within two decUnitAddSub calls */ + if (rhs->digits>NEEDTWO) { /* use fastpath... */ + /* calculate the number of elements in each array */ + ilhs=(lhs->digits+FASTDIGS-1)/FASTDIGS; /* [ceiling] */ + irhs=(rhs->digits+FASTDIGS-1)/FASTDIGS; /* .. */ + iacc=ilhs+irhs; + + /* allocate buffers if required, as usual */ + needbytes=ilhs*sizeof(uInt); + if (needbytes>(Int)sizeof(zlhibuff)) { + alloclhi=(uInt *)malloc(needbytes); + zlhi=alloclhi;} + needbytes=irhs*sizeof(uInt); + if (needbytes>(Int)sizeof(zrhibuff)) { + allocrhi=(uInt *)malloc(needbytes); + zrhi=allocrhi;} + + /* Allocating the accumulator space needs a special case when */ + /* DECDPUN=1 because when converting the accumulator to Units */ + /* after the multiplication each 8-byte item becomes 9 1-byte */ + /* units. Therefore iacc extra bytes are needed at the front */ + /* (rounded up to a multiple of 8 bytes), and the uLong */ + /* accumulator starts offset the appropriate number of units */ + /* to the right to avoid overwrite during the unchunking. */ + needbytes=iacc*sizeof(uLong); + #if DECDPUN==1 + zoff=(iacc+7)/8; /* items to offset by */ + needbytes+=zoff*8; + #endif + if (needbytes>(Int)sizeof(zaccbuff)) { + allocacc=(uLong *)malloc(needbytes); + zacc=(uLong *)allocacc;} + if (zlhi==NULL||zrhi==NULL||zacc==NULL) { + *status|=DEC_Insufficient_storage; + break;} + + acc=(Unit *)zacc; /* -> target Unit array */ + #if DECDPUN==1 + zacc+=zoff; /* start uLong accumulator to right */ + #endif + + /* assemble the chunked copies of the left and right sides */ + for (count=lhs->digits, cup=lhs->lsu, lip=zlhi; count>0; lip++) + for (p=0, *lip=0; p<FASTDIGS && count>0; + p+=DECDPUN, cup++, count-=DECDPUN) + *lip+=*cup*powers[p]; + lmsi=lip-1; /* save -> msi */ + for (count=rhs->digits, cup=rhs->lsu, rip=zrhi; count>0; rip++) + for (p=0, *rip=0; p<FASTDIGS && count>0; + p+=DECDPUN, cup++, count-=DECDPUN) + *rip+=*cup*powers[p]; + rmsi=rip-1; /* save -> msi */ + + /* zero the accumulator */ + for (lp=zacc; lp<zacc+iacc; lp++) *lp=0; + + /* Start the multiplication */ + /* Resolving carries can dominate the cost of accumulating the */ + /* partial products, so this is only done when necessary. */ + /* Each uLong item in the accumulator can hold values up to */ + /* 2**64-1, and each partial product can be as large as */ + /* (10**FASTDIGS-1)**2. When FASTDIGS=9, this can be added to */ + /* itself 18.4 times in a uLong without overflowing, so during */ + /* the main calculation resolution is carried out every 18th */ + /* add -- every 162 digits. Similarly, when FASTDIGS=8, the */ + /* partial products can be added to themselves 1844.6 times in */ + /* a uLong without overflowing, so intermediate carry */ + /* resolution occurs only every 14752 digits. Hence for common */ + /* short numbers usually only the one final carry resolution */ + /* occurs. */ + /* (The count is set via FASTLAZY to simplify experiments to */ + /* measure the value of this approach: a 35% improvement on a */ + /* [34x34] multiply.) */ + lazy=FASTLAZY; /* carry delay count */ + for (rip=zrhi; rip<=rmsi; rip++) { /* over each item in rhs */ + lp=zacc+(rip-zrhi); /* where to add the lhs */ + for (lip=zlhi; lip<=lmsi; lip++, lp++) { /* over each item in lhs */ + *lp+=(uLong)(*lip)*(*rip); /* [this should in-line] */ + } /* lip loop */ + lazy--; + if (lazy>0 && rip!=rmsi) continue; + lazy=FASTLAZY; /* reset delay count */ + /* spin up the accumulator resolving overflows */ + for (lp=zacc; lp<zacc+iacc; lp++) { + if (*lp<FASTBASE) continue; /* it fits */ + lcarry=*lp/FASTBASE; /* top part [slow divide] */ + /* lcarry can exceed 2**32-1, so check again; this check */ + /* and occasional extra divide (slow) is well worth it, as */ + /* it allows FASTLAZY to be increased to 18 rather than 4 */ + /* in the FASTDIGS=9 case */ + if (lcarry<FASTBASE) carry=(uInt)lcarry; /* [usual] */ + else { /* two-place carry [fairly rare] */ + uInt carry2=(uInt)(lcarry/FASTBASE); /* top top part */ + *(lp+2)+=carry2; /* add to item+2 */ + *lp-=((uLong)FASTBASE*FASTBASE*carry2); /* [slow] */ + carry=(uInt)(lcarry-((uLong)FASTBASE*carry2)); /* [inline] */ + } + *(lp+1)+=carry; /* add to item above [inline] */ + *lp-=((uLong)FASTBASE*carry); /* [inline] */ + } /* carry resolution */ + } /* rip loop */ + + /* The multiplication is complete; time to convert back into */ + /* units. This can be done in-place in the accumulator and in */ + /* 32-bit operations, because carries were resolved after the */ + /* final add. This needs N-1 divides and multiplies for */ + /* each item in the accumulator (which will become up to N */ + /* units, where 2<=N<=9). */ + for (lp=zacc, up=acc; lp<zacc+iacc; lp++) { + uInt item=(uInt)*lp; /* decapitate to uInt */ + for (p=0; p<FASTDIGS-DECDPUN; p+=DECDPUN, up++) { + uInt part=item/(DECDPUNMAX+1); + *up=(Unit)(item-(part*(DECDPUNMAX+1))); + item=part; + } /* p */ + *up=(Unit)item; up++; /* [final needs no division] */ + } /* lp */ + accunits=up-acc; /* count of units */ + } + else { /* here to use units directly, without chunking ['old code'] */ + #endif + + /* if accumulator will be too long for local storage, then allocate */ + acc=accbuff; /* -> assume buffer for accumulator */ + needbytes=(D2U(lhs->digits)+D2U(rhs->digits))*sizeof(Unit); + if (needbytes>(Int)sizeof(accbuff)) { + allocacc=(Unit *)malloc(needbytes); + if (allocacc==NULL) {*status|=DEC_Insufficient_storage; break;} + acc=(Unit *)allocacc; /* use the allocated space */ + } + + /* Now the main long multiplication loop */ + /* Unlike the equivalent in the IBM Java implementation, there */ + /* is no advantage in calculating from msu to lsu. So, do it */ + /* by the book, as it were. */ + /* Each iteration calculates ACC=ACC+MULTAND*MULT */ + accunits=1; /* accumulator starts at '0' */ + *acc=0; /* .. (lsu=0) */ + shift=0; /* no multiplicand shift at first */ + madlength=D2U(lhs->digits); /* this won't change */ + mermsup=rhs->lsu+D2U(rhs->digits); /* -> msu+1 of multiplier */ + + for (mer=rhs->lsu; mer<mermsup; mer++) { + /* Here, *mer is the next Unit in the multiplier to use */ + /* If non-zero [optimization] add it... */ + if (*mer!=0) accunits=decUnitAddSub(&acc[shift], accunits-shift, + lhs->lsu, madlength, 0, + &acc[shift], *mer) + + shift; + else { /* extend acc with a 0; it will be used shortly */ + *(acc+accunits)=0; /* [this avoids length of <=0 later] */ + accunits++; + } + /* multiply multiplicand by 10**DECDPUN for next Unit to left */ + shift++; /* add this for 'logical length' */ + } /* n */ + #if FASTMUL + } /* unchunked units */ + #endif + /* common end-path */ + #if DECTRACE + decDumpAr('*', acc, accunits); /* Show exact result */ + #endif + + /* acc now contains the exact result of the multiplication, */ + /* possibly with a leading zero unit; build the decNumber from */ + /* it, noting if any residue */ + res->bits=bits; /* set sign */ + res->digits=decGetDigits(acc, accunits); /* count digits exactly */ + + /* There can be a 31-bit wrap in calculating the exponent. */ + /* This can only happen if both input exponents are negative and */ + /* both their magnitudes are large. If there was a wrap, set a */ + /* safe very negative exponent, from which decFinalize() will */ + /* raise a hard underflow shortly. */ + exponent=lhs->exponent+rhs->exponent; /* calculate exponent */ + if (lhs->exponent<0 && rhs->exponent<0 && exponent>0) + exponent=-2*DECNUMMAXE; /* force underflow */ + res->exponent=exponent; /* OK to overwrite now */ + + + /* Set the coefficient. If any rounding, residue records */ + decSetCoeff(res, set, acc, res->digits, &residue, status); + decFinish(res, set, &residue, status); /* final cleanup */ + } while(0); /* end protected */ + + if (allocacc!=NULL) free(allocacc); /* drop any storage used */ + #if DECSUBSET + if (allocrhs!=NULL) free(allocrhs); /* .. */ + if (alloclhs!=NULL) free(alloclhs); /* .. */ + #endif + #if FASTMUL + if (allocrhi!=NULL) free(allocrhi); /* .. */ + if (alloclhi!=NULL) free(alloclhi); /* .. */ + #endif + return res; + } /* decMultiplyOp */ + +/* ------------------------------------------------------------------ */ +/* decExpOp -- effect exponentiation */ +/* */ +/* This computes C = exp(A) */ +/* */ +/* res is C, the result. C may be A */ +/* rhs is A */ +/* set is the context; note that rounding mode has no effect */ +/* */ +/* C must have space for set->digits digits. status is updated but */ +/* not set. */ +/* */ +/* Restrictions: */ +/* */ +/* digits, emax, and -emin in the context must be less than */ +/* 2*DEC_MAX_MATH (1999998), and the rhs must be within these */ +/* bounds or a zero. This is an internal routine, so these */ +/* restrictions are contractual and not enforced. */ +/* */ +/* A finite result is rounded using DEC_ROUND_HALF_EVEN; it will */ +/* almost always be correctly rounded, but may be up to 1 ulp in */ +/* error in rare cases. */ +/* */ +/* Finite results will always be full precision and Inexact, except */ +/* when A is a zero or -Infinity (giving 1 or 0 respectively). */ +/* ------------------------------------------------------------------ */ +/* This approach used here is similar to the algorithm described in */ +/* */ +/* Variable Precision Exponential Function, T. E. Hull and */ +/* A. Abrham, ACM Transactions on Mathematical Software, Vol 12 #2, */ +/* pp79-91, ACM, June 1986. */ +/* */ +/* with the main difference being that the iterations in the series */ +/* evaluation are terminated dynamically (which does not require the */ +/* extra variable-precision variables which are expensive in this */ +/* context). */ +/* */ +/* The error analysis in Hull & Abrham's paper applies except for the */ +/* round-off error accumulation during the series evaluation. This */ +/* code does not precalculate the number of iterations and so cannot */ +/* use Horner's scheme. Instead, the accumulation is done at double- */ +/* precision, which ensures that the additions of the terms are exact */ +/* and do not accumulate round-off (and any round-off errors in the */ +/* terms themselves move 'to the right' faster than they can */ +/* accumulate). This code also extends the calculation by allowing, */ +/* in the spirit of other decNumber operators, the input to be more */ +/* precise than the result (the precision used is based on the more */ +/* precise of the input or requested result). */ +/* */ +/* Implementation notes: */ +/* */ +/* 1. This is separated out as decExpOp so it can be called from */ +/* other Mathematical functions (notably Ln) with a wider range */ +/* than normal. In particular, it can handle the slightly wider */ +/* (double) range needed by Ln (which has to be able to calculate */ +/* exp(-x) where x can be the tiniest number (Ntiny). */ +/* */ +/* 2. Normalizing x to be <=0.1 (instead of <=1) reduces loop */ +/* iterations by appoximately a third with additional (although */ +/* diminishing) returns as the range is reduced to even smaller */ +/* fractions. However, h (the power of 10 used to correct the */ +/* result at the end, see below) must be kept <=8 as otherwise */ +/* the final result cannot be computed. Hence the leverage is a */ +/* sliding value (8-h), where potentially the range is reduced */ +/* more for smaller values. */ +/* */ +/* The leverage that can be applied in this way is severely */ +/* limited by the cost of the raise-to-the power at the end, */ +/* which dominates when the number of iterations is small (less */ +/* than ten) or when rhs is short. As an example, the adjustment */ +/* x**10,000,000 needs 31 multiplications, all but one full-width. */ +/* */ +/* 3. The restrictions (especially precision) could be raised with */ +/* care, but the full decNumber range seems very hard within the */ +/* 32-bit limits. */ +/* */ +/* 4. The working precisions for the static buffers are twice the */ +/* obvious size to allow for calls from decNumberPower. */ +/* ------------------------------------------------------------------ */ +decNumber * decExpOp(decNumber *res, const decNumber *rhs, + decContext *set, uInt *status) { + uInt ignore=0; /* working status */ + Int h; /* adjusted exponent for 0.xxxx */ + Int p; /* working precision */ + Int residue; /* rounding residue */ + uInt needbytes; /* for space calculations */ + const decNumber *x=rhs; /* (may point to safe copy later) */ + decContext aset, tset, dset; /* working contexts */ + Int comp; /* work */ + + /* the argument is often copied to normalize it, so (unusually) it */ + /* is treated like other buffers, using DECBUFFER, +1 in case */ + /* DECBUFFER is 0 */ + decNumber bufr[D2N(DECBUFFER*2+1)]; + decNumber *allocrhs=NULL; /* non-NULL if rhs buffer allocated */ + + /* the working precision will be no more than set->digits+8+1 */ + /* so for on-stack buffers DECBUFFER+9 is used, +1 in case DECBUFFER */ + /* is 0 (and twice that for the accumulator) */ + + /* buffer for t, term (working precision plus) */ + decNumber buft[D2N(DECBUFFER*2+9+1)]; + decNumber *allocbuft=NULL; /* -> allocated buft, iff allocated */ + decNumber *t=buft; /* term */ + /* buffer for a, accumulator (working precision * 2), at least 9 */ + decNumber bufa[D2N(DECBUFFER*4+18+1)]; + decNumber *allocbufa=NULL; /* -> allocated bufa, iff allocated */ + decNumber *a=bufa; /* accumulator */ + /* decNumber for the divisor term; this needs at most 9 digits */ + /* and so can be fixed size [16 so can use standard context] */ + decNumber bufd[D2N(16)]; + decNumber *d=bufd; /* divisor */ + decNumber numone; /* constant 1 */ + + #if DECCHECK + Int iterations=0; /* for later sanity check */ + if (decCheckOperands(res, DECUNUSED, rhs, set)) return res; + #endif + + do { /* protect allocated storage */ + if (SPECIALARG) { /* handle infinities and NaNs */ + if (decNumberIsInfinite(rhs)) { /* an infinity */ + if (decNumberIsNegative(rhs)) /* -Infinity -> +0 */ + decNumberZero(res); + else decNumberCopy(res, rhs); /* +Infinity -> self */ + } + else decNaNs(res, rhs, NULL, set, status); /* a NaN */ + break;} + + if (ISZERO(rhs)) { /* zeros -> exact 1 */ + decNumberZero(res); /* make clean 1 */ + *res->lsu=1; /* .. */ + break;} /* [no status to set] */ + + /* e**x when 0 < x < 0.66 is < 1+3x/2, hence can fast-path */ + /* positive and negative tiny cases which will result in inexact */ + /* 1. This also allows the later add-accumulate to always be */ + /* exact (because its length will never be more than twice the */ + /* working precision). */ + /* The comparator (tiny) needs just one digit, so use the */ + /* decNumber d for it (reused as the divisor, etc., below); its */ + /* exponent is such that if x is positive it will have */ + /* set->digits-1 zeros between the decimal point and the digit, */ + /* which is 4, and if x is negative one more zero there as the */ + /* more precise result will be of the form 0.9999999 rather than */ + /* 1.0000001. Hence, tiny will be 0.0000004 if digits=7 and x>0 */ + /* or 0.00000004 if digits=7 and x<0. If RHS not larger than */ + /* this then the result will be 1.000000 */ + decNumberZero(d); /* clean */ + *d->lsu=4; /* set 4 .. */ + d->exponent=-set->digits; /* * 10**(-d) */ + if (decNumberIsNegative(rhs)) d->exponent--; /* negative case */ + comp=decCompare(d, rhs, 1); /* signless compare */ + if (comp==BADINT) { + *status|=DEC_Insufficient_storage; + break;} + if (comp>=0) { /* rhs < d */ + Int shift=set->digits-1; + decNumberZero(res); /* set 1 */ + *res->lsu=1; /* .. */ + res->digits=decShiftToMost(res->lsu, 1, shift); + res->exponent=-shift; /* make 1.0000... */ + *status|=DEC_Inexact | DEC_Rounded; /* .. inexactly */ + break;} /* tiny */ + + /* set up the context to be used for calculating a, as this is */ + /* used on both paths below */ + decContextDefault(&aset, DEC_INIT_DECIMAL64); + /* accumulator bounds are as requested (could underflow) */ + aset.emax=set->emax; /* usual bounds */ + aset.emin=set->emin; /* .. */ + aset.clamp=0; /* and no concrete format */ + + /* calculate the adjusted (Hull & Abrham) exponent (where the */ + /* decimal point is just to the left of the coefficient msd) */ + h=rhs->exponent+rhs->digits; + /* if h>8 then 10**h cannot be calculated safely; however, when */ + /* h=8 then exp(|rhs|) will be at least exp(1E+7) which is at */ + /* least 6.59E+4342944, so (due to the restriction on Emax/Emin) */ + /* overflow (or underflow to 0) is guaranteed -- so this case can */ + /* be handled by simply forcing the appropriate excess */ + if (h>8) { /* overflow/underflow */ + /* set up here so Power call below will over or underflow to */ + /* zero; set accumulator to either 2 or 0.02 */ + /* [stack buffer for a is always big enough for this] */ + decNumberZero(a); + *a->lsu=2; /* not 1 but < exp(1) */ + if (decNumberIsNegative(rhs)) a->exponent=-2; /* make 0.02 */ + h=8; /* clamp so 10**h computable */ + p=9; /* set a working precision */ + } + else { /* h<=8 */ + Int maxlever=(rhs->digits>8?1:0); + /* [could/should increase this for precisions >40 or so, too] */ + + /* if h is 8, cannot normalize to a lower upper limit because */ + /* the final result will not be computable (see notes above), */ + /* but leverage can be applied whenever h is less than 8. */ + /* Apply as much as possible, up to a MAXLEVER digits, which */ + /* sets the tradeoff against the cost of the later a**(10**h). */ + /* As h is increased, the working precision below also */ + /* increases to compensate for the "constant digits at the */ + /* front" effect. */ + Int lever=MINI(8-h, maxlever); /* leverage attainable */ + Int use=-rhs->digits-lever; /* exponent to use for RHS */ + h+=lever; /* apply leverage selected */ + if (h<0) { /* clamp */ + use+=h; /* [may end up subnormal] */ + h=0; + } + /* Take a copy of RHS if it needs normalization (true whenever x>=1) */ + if (rhs->exponent!=use) { + decNumber *newrhs=bufr; /* assume will fit on stack */ + needbytes=sizeof(decNumber)+(D2U(rhs->digits)-1)*sizeof(Unit); + if (needbytes>sizeof(bufr)) { /* need malloc space */ + allocrhs=(decNumber *)malloc(needbytes); + if (allocrhs==NULL) { /* hopeless -- abandon */ + *status|=DEC_Insufficient_storage; + break;} + newrhs=allocrhs; /* use the allocated space */ + } + decNumberCopy(newrhs, rhs); /* copy to safe space */ + newrhs->exponent=use; /* normalize; now <1 */ + x=newrhs; /* ready for use */ + /* decNumberShow(x); */ + } + + /* Now use the usual power series to evaluate exp(x). The */ + /* series starts as 1 + x + x^2/2 ... so prime ready for the */ + /* third term by setting the term variable t=x, the accumulator */ + /* a=1, and the divisor d=2. */ + + /* First determine the working precision. From Hull & Abrham */ + /* this is set->digits+h+2. However, if x is 'over-precise' we */ + /* need to allow for all its digits to potentially participate */ + /* (consider an x where all the excess digits are 9s) so in */ + /* this case use x->digits+h+2 */ + p=MAXI(x->digits, set->digits)+h+2; /* [h<=8] */ + + /* a and t are variable precision, and depend on p, so space */ + /* must be allocated for them if necessary */ + + /* the accumulator needs to be able to hold 2p digits so that */ + /* the additions on the second and subsequent iterations are */ + /* sufficiently exact. */ + needbytes=sizeof(decNumber)+(D2U(p*2)-1)*sizeof(Unit); + if (needbytes>sizeof(bufa)) { /* need malloc space */ + allocbufa=(decNumber *)malloc(needbytes); + if (allocbufa==NULL) { /* hopeless -- abandon */ + *status|=DEC_Insufficient_storage; + break;} + a=allocbufa; /* use the allocated space */ + } + /* the term needs to be able to hold p digits (which is */ + /* guaranteed to be larger than x->digits, so the initial copy */ + /* is safe); it may also be used for the raise-to-power */ + /* calculation below, which needs an extra two digits */ + needbytes=sizeof(decNumber)+(D2U(p+2)-1)*sizeof(Unit); + if (needbytes>sizeof(buft)) { /* need malloc space */ + allocbuft=(decNumber *)malloc(needbytes); + if (allocbuft==NULL) { /* hopeless -- abandon */ + *status|=DEC_Insufficient_storage; + break;} + t=allocbuft; /* use the allocated space */ + } + + decNumberCopy(t, x); /* term=x */ + decNumberZero(a); *a->lsu=1; /* accumulator=1 */ + decNumberZero(d); *d->lsu=2; /* divisor=2 */ + decNumberZero(&numone); *numone.lsu=1; /* constant 1 for increment */ + + /* set up the contexts for calculating a, t, and d */ + decContextDefault(&tset, DEC_INIT_DECIMAL64); + dset=tset; + /* accumulator bounds are set above, set precision now */ + aset.digits=p*2; /* double */ + /* term bounds avoid any underflow or overflow */ + tset.digits=p; + tset.emin=DEC_MIN_EMIN; /* [emax is plenty] */ + /* [dset.digits=16, etc., are sufficient] */ + + /* finally ready to roll */ + for (;;) { + #if DECCHECK + iterations++; + #endif + /* only the status from the accumulation is interesting */ + /* [but it should remain unchanged after first add] */ + decAddOp(a, a, t, &aset, 0, status); /* a=a+t */ + decMultiplyOp(t, t, x, &tset, &ignore); /* t=t*x */ + decDivideOp(t, t, d, &tset, DIVIDE, &ignore); /* t=t/d */ + /* the iteration ends when the term cannot affect the result, */ + /* if rounded to p digits, which is when its value is smaller */ + /* than the accumulator by p+1 digits. There must also be */ + /* full precision in a. */ + if (((a->digits+a->exponent)>=(t->digits+t->exponent+p+1)) + && (a->digits>=p)) break; + decAddOp(d, d, &numone, &dset, 0, &ignore); /* d=d+1 */ + } /* iterate */ + + #if DECCHECK + /* just a sanity check; comment out test to show always */ + if (iterations>p+3) + printf("Exp iterations=%ld, status=%08lx, p=%ld, d=%ld\n", + iterations, *status, p, x->digits); + #endif + } /* h<=8 */ + + /* apply postconditioning: a=a**(10**h) -- this is calculated */ + /* at a slightly higher precision than Hull & Abrham suggest */ + if (h>0) { + Int seenbit=0; /* set once a 1-bit is seen */ + Int i; /* counter */ + Int n=powers[h]; /* always positive */ + aset.digits=p+2; /* sufficient precision */ + /* avoid the overhead and many extra digits of decNumberPower */ + /* as all that is needed is the short 'multipliers' loop; here */ + /* accumulate the answer into t */ + decNumberZero(t); *t->lsu=1; /* acc=1 */ + for (i=1;;i++){ /* for each bit [top bit ignored] */ + /* abandon if have had overflow or terminal underflow */ + if (*status & (DEC_Overflow|DEC_Underflow)) { /* interesting? */ + if (*status&DEC_Overflow || ISZERO(t)) break;} + n=n<<1; /* move next bit to testable position */ + if (n<0) { /* top bit is set */ + seenbit=1; /* OK, have a significant bit */ + decMultiplyOp(t, t, a, &aset, status); /* acc=acc*x */ + } + if (i==31) break; /* that was the last bit */ + if (!seenbit) continue; /* no need to square 1 */ + decMultiplyOp(t, t, t, &aset, status); /* acc=acc*acc [square] */ + } /*i*/ /* 32 bits */ + /* decNumberShow(t); */ + a=t; /* and carry on using t instead of a */ + } + + /* Copy and round the result to res */ + residue=1; /* indicate dirt to right .. */ + if (ISZERO(a)) residue=0; /* .. unless underflowed to 0 */ + aset.digits=set->digits; /* [use default rounding] */ + decCopyFit(res, a, &aset, &residue, status); /* copy & shorten */ + decFinish(res, set, &residue, status); /* cleanup/set flags */ + } while(0); /* end protected */ + + if (allocrhs !=NULL) free(allocrhs); /* drop any storage used */ + if (allocbufa!=NULL) free(allocbufa); /* .. */ + if (allocbuft!=NULL) free(allocbuft); /* .. */ + /* [status is handled by caller] */ + return res; + } /* decExpOp */ + +/* ------------------------------------------------------------------ */ +/* Initial-estimate natural logarithm table */ +/* */ +/* LNnn -- 90-entry 16-bit table for values from .10 through .99. */ +/* The result is a 4-digit encode of the coefficient (c=the */ +/* top 14 bits encoding 0-9999) and a 2-digit encode of the */ +/* exponent (e=the bottom 2 bits encoding 0-3) */ +/* */ +/* The resulting value is given by: */ +/* */ +/* v = -c * 10**(-e-3) */ +/* */ +/* where e and c are extracted from entry k = LNnn[x-10] */ +/* where x is truncated (NB) into the range 10 through 99, */ +/* and then c = k>>2 and e = k&3. */ +/* ------------------------------------------------------------------ */ +const uShort LNnn[90]={9016, 8652, 8316, 8008, 7724, 7456, 7208, + 6972, 6748, 6540, 6340, 6148, 5968, 5792, 5628, 5464, 5312, + 5164, 5020, 4884, 4748, 4620, 4496, 4376, 4256, 4144, 4032, + 39233, 38181, 37157, 36157, 35181, 34229, 33297, 32389, 31501, 30629, + 29777, 28945, 28129, 27329, 26545, 25777, 25021, 24281, 23553, 22837, + 22137, 21445, 20769, 20101, 19445, 18801, 18165, 17541, 16925, 16321, + 15721, 15133, 14553, 13985, 13421, 12865, 12317, 11777, 11241, 10717, + 10197, 9685, 9177, 8677, 8185, 7697, 7213, 6737, 6269, 5801, + 5341, 4889, 4437, 39930, 35534, 31186, 26886, 22630, 18418, 14254, + 10130, 6046, 20055}; + +/* ------------------------------------------------------------------ */ +/* decLnOp -- effect natural logarithm */ +/* */ +/* This computes C = ln(A) */ +/* */ +/* res is C, the result. C may be A */ +/* rhs is A */ +/* set is the context; note that rounding mode has no effect */ +/* */ +/* C must have space for set->digits digits. */ +/* */ +/* Notable cases: */ +/* A<0 -> Invalid */ +/* A=0 -> -Infinity (Exact) */ +/* A=+Infinity -> +Infinity (Exact) */ +/* A=1 exactly -> 0 (Exact) */ +/* */ +/* Restrictions (as for Exp): */ +/* */ +/* digits, emax, and -emin in the context must be less than */ +/* DEC_MAX_MATH+11 (1000010), and the rhs must be within these */ +/* bounds or a zero. This is an internal routine, so these */ +/* restrictions are contractual and not enforced. */ +/* */ +/* A finite result is rounded using DEC_ROUND_HALF_EVEN; it will */ +/* almost always be correctly rounded, but may be up to 1 ulp in */ +/* error in rare cases. */ +/* ------------------------------------------------------------------ */ +/* The result is calculated using Newton's method, with each */ +/* iteration calculating a' = a + x * exp(-a) - 1. See, for example, */ +/* Epperson 1989. */ +/* */ +/* The iteration ends when the adjustment x*exp(-a)-1 is tiny enough. */ +/* This has to be calculated at the sum of the precision of x and the */ +/* working precision. */ +/* */ +/* Implementation notes: */ +/* */ +/* 1. This is separated out as decLnOp so it can be called from */ +/* other Mathematical functions (e.g., Log 10) with a wider range */ +/* than normal. In particular, it can handle the slightly wider */ +/* (+9+2) range needed by a power function. */ +/* */ +/* 2. The speed of this function is about 10x slower than exp, as */ +/* it typically needs 4-6 iterations for short numbers, and the */ +/* extra precision needed adds a squaring effect, twice. */ +/* */ +/* 3. Fastpaths are included for ln(10) and ln(2), up to length 40, */ +/* as these are common requests. ln(10) is used by log10(x). */ +/* */ +/* 4. An iteration might be saved by widening the LNnn table, and */ +/* would certainly save at least one if it were made ten times */ +/* bigger, too (for truncated fractions 0.100 through 0.999). */ +/* However, for most practical evaluations, at least four or five */ +/* iterations will be neede -- so this would only speed up by */ +/* 20-25% and that probably does not justify increasing the table */ +/* size. */ +/* */ +/* 5. The static buffers are larger than might be expected to allow */ +/* for calls from decNumberPower. */ +/* ------------------------------------------------------------------ */ +decNumber * decLnOp(decNumber *res, const decNumber *rhs, + decContext *set, uInt *status) { + uInt ignore=0; /* working status accumulator */ + uInt needbytes; /* for space calculations */ + Int residue; /* rounding residue */ + Int r; /* rhs=f*10**r [see below] */ + Int p; /* working precision */ + Int pp; /* precision for iteration */ + Int t; /* work */ + + /* buffers for a (accumulator, typically precision+2) and b */ + /* (adjustment calculator, same size) */ + decNumber bufa[D2N(DECBUFFER+12)]; + decNumber *allocbufa=NULL; /* -> allocated bufa, iff allocated */ + decNumber *a=bufa; /* accumulator/work */ + decNumber bufb[D2N(DECBUFFER*2+2)]; + decNumber *allocbufb=NULL; /* -> allocated bufa, iff allocated */ + decNumber *b=bufb; /* adjustment/work */ + + decNumber numone; /* constant 1 */ + decNumber cmp; /* work */ + decContext aset, bset; /* working contexts */ + + #if DECCHECK + Int iterations=0; /* for later sanity check */ + if (decCheckOperands(res, DECUNUSED, rhs, set)) return res; + #endif + + do { /* protect allocated storage */ + if (SPECIALARG) { /* handle infinities and NaNs */ + if (decNumberIsInfinite(rhs)) { /* an infinity */ + if (decNumberIsNegative(rhs)) /* -Infinity -> error */ + *status|=DEC_Invalid_operation; + else decNumberCopy(res, rhs); /* +Infinity -> self */ + } + else decNaNs(res, rhs, NULL, set, status); /* a NaN */ + break;} + + if (ISZERO(rhs)) { /* +/- zeros -> -Infinity */ + decNumberZero(res); /* make clean */ + res->bits=DECINF|DECNEG; /* set - infinity */ + break;} /* [no status to set] */ + + /* Non-zero negatives are bad... */ + if (decNumberIsNegative(rhs)) { /* -x -> error */ + *status|=DEC_Invalid_operation; + break;} + + /* Here, rhs is positive, finite, and in range */ + + /* lookaside fastpath code for ln(2) and ln(10) at common lengths */ + if (rhs->exponent==0 && set->digits<=40) { + #if DECDPUN==1 + if (rhs->lsu[0]==0 && rhs->lsu[1]==1 && rhs->digits==2) { /* ln(10) */ + #else + if (rhs->lsu[0]==10 && rhs->digits==2) { /* ln(10) */ + #endif + aset=*set; aset.round=DEC_ROUND_HALF_EVEN; + #define LN10 "2.302585092994045684017991454684364207601" + decNumberFromString(res, LN10, &aset); + *status|=(DEC_Inexact | DEC_Rounded); /* is inexact */ + break;} + if (rhs->lsu[0]==2 && rhs->digits==1) { /* ln(2) */ + aset=*set; aset.round=DEC_ROUND_HALF_EVEN; + #define LN2 "0.6931471805599453094172321214581765680755" + decNumberFromString(res, LN2, &aset); + *status|=(DEC_Inexact | DEC_Rounded); + break;} + } /* integer and short */ + + /* Determine the working precision. This is normally the */ + /* requested precision + 2, with a minimum of 9. However, if */ + /* the rhs is 'over-precise' then allow for all its digits to */ + /* potentially participate (consider an rhs where all the excess */ + /* digits are 9s) so in this case use rhs->digits+2. */ + p=MAXI(rhs->digits, MAXI(set->digits, 7))+2; + + /* Allocate space for the accumulator and the high-precision */ + /* adjustment calculator, if necessary. The accumulator must */ + /* be able to hold p digits, and the adjustment up to */ + /* rhs->digits+p digits. They are also made big enough for 16 */ + /* digits so that they can be used for calculating the initial */ + /* estimate. */ + needbytes=sizeof(decNumber)+(D2U(MAXI(p,16))-1)*sizeof(Unit); + if (needbytes>sizeof(bufa)) { /* need malloc space */ + allocbufa=(decNumber *)malloc(needbytes); + if (allocbufa==NULL) { /* hopeless -- abandon */ + *status|=DEC_Insufficient_storage; + break;} + a=allocbufa; /* use the allocated space */ + } + pp=p+rhs->digits; + needbytes=sizeof(decNumber)+(D2U(MAXI(pp,16))-1)*sizeof(Unit); + if (needbytes>sizeof(bufb)) { /* need malloc space */ + allocbufb=(decNumber *)malloc(needbytes); + if (allocbufb==NULL) { /* hopeless -- abandon */ + *status|=DEC_Insufficient_storage; + break;} + b=allocbufb; /* use the allocated space */ + } + + /* Prepare an initial estimate in acc. Calculate this by */ + /* considering the coefficient of x to be a normalized fraction, */ + /* f, with the decimal point at far left and multiplied by */ + /* 10**r. Then, rhs=f*10**r and 0.1<=f<1, and */ + /* ln(x) = ln(f) + ln(10)*r */ + /* Get the initial estimate for ln(f) from a small lookup */ + /* table (see above) indexed by the first two digits of f, */ + /* truncated. */ + + decContextDefault(&aset, DEC_INIT_DECIMAL64); /* 16-digit extended */ + r=rhs->exponent+rhs->digits; /* 'normalised' exponent */ + decNumberFromInt32(a, r); /* a=r */ + decNumberFromInt32(b, 2302585); /* b=ln(10) (2.302585) */ + b->exponent=-6; /* .. */ + decMultiplyOp(a, a, b, &aset, &ignore); /* a=a*b */ + /* now get top two digits of rhs into b by simple truncate and */ + /* force to integer */ + residue=0; /* (no residue) */ + aset.digits=2; aset.round=DEC_ROUND_DOWN; + decCopyFit(b, rhs, &aset, &residue, &ignore); /* copy & shorten */ + b->exponent=0; /* make integer */ + t=decGetInt(b); /* [cannot fail] */ + if (t<10) t=X10(t); /* adjust single-digit b */ + t=LNnn[t-10]; /* look up ln(b) */ + decNumberFromInt32(b, t>>2); /* b=ln(b) coefficient */ + b->exponent=-(t&3)-3; /* set exponent */ + b->bits=DECNEG; /* ln(0.10)->ln(0.99) always -ve */ + aset.digits=16; aset.round=DEC_ROUND_HALF_EVEN; /* restore */ + decAddOp(a, a, b, &aset, 0, &ignore); /* acc=a+b */ + /* the initial estimate is now in a, with up to 4 digits correct. */ + /* When rhs is at or near Nmax the estimate will be low, so we */ + /* will approach it from below, avoiding overflow when calling exp. */ + + decNumberZero(&numone); *numone.lsu=1; /* constant 1 for adjustment */ + + /* accumulator bounds are as requested (could underflow, but */ + /* cannot overflow) */ + aset.emax=set->emax; + aset.emin=set->emin; + aset.clamp=0; /* no concrete format */ + /* set up a context to be used for the multiply and subtract */ + bset=aset; + bset.emax=DEC_MAX_MATH*2; /* use double bounds for the */ + bset.emin=-DEC_MAX_MATH*2; /* adjustment calculation */ + /* [see decExpOp call below] */ + /* for each iteration double the number of digits to calculate, */ + /* up to a maximum of p */ + pp=9; /* initial precision */ + /* [initially 9 as then the sequence starts 7+2, 16+2, and */ + /* 34+2, which is ideal for standard-sized numbers] */ + aset.digits=pp; /* working context */ + bset.digits=pp+rhs->digits; /* wider context */ + for (;;) { /* iterate */ + #if DECCHECK + iterations++; + if (iterations>24) break; /* consider 9 * 2**24 */ + #endif + /* calculate the adjustment (exp(-a)*x-1) into b. This is a */ + /* catastrophic subtraction but it really is the difference */ + /* from 1 that is of interest. */ + /* Use the internal entry point to Exp as it allows the double */ + /* range for calculating exp(-a) when a is the tiniest subnormal. */ + a->bits^=DECNEG; /* make -a */ + decExpOp(b, a, &bset, &ignore); /* b=exp(-a) */ + a->bits^=DECNEG; /* restore sign of a */ + /* now multiply by rhs and subtract 1, at the wider precision */ + decMultiplyOp(b, b, rhs, &bset, &ignore); /* b=b*rhs */ + decAddOp(b, b, &numone, &bset, DECNEG, &ignore); /* b=b-1 */ + + /* the iteration ends when the adjustment cannot affect the */ + /* result by >=0.5 ulp (at the requested digits), which */ + /* is when its value is smaller than the accumulator by */ + /* set->digits+1 digits (or it is zero) -- this is a looser */ + /* requirement than for Exp because all that happens to the */ + /* accumulator after this is the final rounding (but note that */ + /* there must also be full precision in a, or a=0). */ + + if (decNumberIsZero(b) || + (a->digits+a->exponent)>=(b->digits+b->exponent+set->digits+1)) { + if (a->digits==p) break; + if (decNumberIsZero(a)) { + decCompareOp(&cmp, rhs, &numone, &aset, COMPARE, &ignore); /* rhs=1 ? */ + if (cmp.lsu[0]==0) a->exponent=0; /* yes, exact 0 */ + else *status|=(DEC_Inexact | DEC_Rounded); /* no, inexact */ + break; + } + /* force padding if adjustment has gone to 0 before full length */ + if (decNumberIsZero(b)) b->exponent=a->exponent-p; + } + + /* not done yet ... */ + decAddOp(a, a, b, &aset, 0, &ignore); /* a=a+b for next estimate */ + if (pp==p) continue; /* precision is at maximum */ + /* lengthen the next calculation */ + pp=pp*2; /* double precision */ + if (pp>p) pp=p; /* clamp to maximum */ + aset.digits=pp; /* working context */ + bset.digits=pp+rhs->digits; /* wider context */ + } /* Newton's iteration */ + + #if DECCHECK + /* just a sanity check; remove the test to show always */ + if (iterations>24) + printf("Ln iterations=%ld, status=%08lx, p=%ld, d=%ld\n", + iterations, *status, p, rhs->digits); + #endif + + /* Copy and round the result to res */ + residue=1; /* indicate dirt to right */ + if (ISZERO(a)) residue=0; /* .. unless underflowed to 0 */ + aset.digits=set->digits; /* [use default rounding] */ + decCopyFit(res, a, &aset, &residue, status); /* copy & shorten */ + decFinish(res, set, &residue, status); /* cleanup/set flags */ + } while(0); /* end protected */ + + if (allocbufa!=NULL) free(allocbufa); /* drop any storage used */ + if (allocbufb!=NULL) free(allocbufb); /* .. */ + /* [status is handled by caller] */ + return res; + } /* decLnOp */ + +/* ------------------------------------------------------------------ */ +/* decQuantizeOp -- force exponent to requested value */ +/* */ +/* This computes C = op(A, B), where op adjusts the coefficient */ +/* of C (by rounding or shifting) such that the exponent (-scale) */ +/* of C has the value B or matches the exponent of B. */ +/* The numerical value of C will equal A, except for the effects of */ +/* any rounding that occurred. */ +/* */ +/* res is C, the result. C may be A or B */ +/* lhs is A, the number to adjust */ +/* rhs is B, the requested exponent */ +/* set is the context */ +/* quant is 1 for quantize or 0 for rescale */ +/* status is the status accumulator (this can be called without */ +/* risk of control loss) */ +/* */ +/* C must have space for set->digits digits. */ +/* */ +/* Unless there is an error or the result is infinite, the exponent */ +/* after the operation is guaranteed to be that requested. */ +/* ------------------------------------------------------------------ */ +static decNumber * decQuantizeOp(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set, + Flag quant, uInt *status) { + #if DECSUBSET + decNumber *alloclhs=NULL; /* non-NULL if rounded lhs allocated */ + decNumber *allocrhs=NULL; /* .., rhs */ + #endif + const decNumber *inrhs=rhs; /* save original rhs */ + Int reqdigits=set->digits; /* requested DIGITS */ + Int reqexp; /* requested exponent [-scale] */ + Int residue=0; /* rounding residue */ + Int etiny=set->emin-(reqdigits-1); + + #if DECCHECK + if (decCheckOperands(res, lhs, rhs, set)) return res; + #endif + + do { /* protect allocated storage */ + #if DECSUBSET + if (!set->extended) { + /* reduce operands and set lostDigits status, as needed */ + if (lhs->digits>reqdigits) { + alloclhs=decRoundOperand(lhs, set, status); + if (alloclhs==NULL) break; + lhs=alloclhs; + } + if (rhs->digits>reqdigits) { /* [this only checks lostDigits] */ + allocrhs=decRoundOperand(rhs, set, status); + if (allocrhs==NULL) break; + rhs=allocrhs; + } + } + #endif + /* [following code does not require input rounding] */ + + /* Handle special values */ + if (SPECIALARGS) { + /* NaNs get usual processing */ + if (SPECIALARGS & (DECSNAN | DECNAN)) + decNaNs(res, lhs, rhs, set, status); + /* one infinity but not both is bad */ + else if ((lhs->bits ^ rhs->bits) & DECINF) + *status|=DEC_Invalid_operation; + /* both infinity: return lhs */ + else decNumberCopy(res, lhs); /* [nop if in place] */ + break; + } + + /* set requested exponent */ + if (quant) reqexp=inrhs->exponent; /* quantize -- match exponents */ + else { /* rescale -- use value of rhs */ + /* Original rhs must be an integer that fits and is in range, */ + /* which could be from -1999999997 to +999999999, thanks to */ + /* subnormals */ + reqexp=decGetInt(inrhs); /* [cannot fail] */ + } + + #if DECSUBSET + if (!set->extended) etiny=set->emin; /* no subnormals */ + #endif + + if (reqexp==BADINT /* bad (rescale only) or .. */ + || reqexp==BIGODD || reqexp==BIGEVEN /* very big (ditto) or .. */ + || (reqexp<etiny) /* < lowest */ + || (reqexp>set->emax)) { /* > emax */ + *status|=DEC_Invalid_operation; + break;} + + /* the RHS has been processed, so it can be overwritten now if necessary */ + if (ISZERO(lhs)) { /* zero coefficient unchanged */ + decNumberCopy(res, lhs); /* [nop if in place] */ + res->exponent=reqexp; /* .. just set exponent */ + #if DECSUBSET + if (!set->extended) res->bits=0; /* subset specification; no -0 */ + #endif + } + else { /* non-zero lhs */ + Int adjust=reqexp-lhs->exponent; /* digit adjustment needed */ + /* if adjusted coefficient will definitely not fit, give up now */ + if ((lhs->digits-adjust)>reqdigits) { + *status|=DEC_Invalid_operation; + break; + } + + if (adjust>0) { /* increasing exponent */ + /* this will decrease the length of the coefficient by adjust */ + /* digits, and must round as it does so */ + decContext workset; /* work */ + workset=*set; /* clone rounding, etc. */ + workset.digits=lhs->digits-adjust; /* set requested length */ + /* [note that the latter can be <1, here] */ + decCopyFit(res, lhs, &workset, &residue, status); /* fit to result */ + decApplyRound(res, &workset, residue, status); /* .. and round */ + residue=0; /* [used] */ + /* If just rounded a 999s case, exponent will be off by one; */ + /* adjust back (after checking space), if so. */ + if (res->exponent>reqexp) { + /* re-check needed, e.g., for quantize(0.9999, 0.001) under */ + /* set->digits==3 */ + if (res->digits==reqdigits) { /* cannot shift by 1 */ + *status&=~(DEC_Inexact | DEC_Rounded); /* [clean these] */ + *status|=DEC_Invalid_operation; + break; + } + res->digits=decShiftToMost(res->lsu, res->digits, 1); /* shift */ + res->exponent--; /* (re)adjust the exponent. */ + } + #if DECSUBSET + if (ISZERO(res) && !set->extended) res->bits=0; /* subset; no -0 */ + #endif + } /* increase */ + else /* adjust<=0 */ { /* decreasing or = exponent */ + /* this will increase the length of the coefficient by -adjust */ + /* digits, by adding zero or more trailing zeros; this is */ + /* already checked for fit, above */ + decNumberCopy(res, lhs); /* [it will fit] */ + /* if padding needed (adjust<0), add it now... */ + if (adjust<0) { + res->digits=decShiftToMost(res->lsu, res->digits, -adjust); + res->exponent+=adjust; /* adjust the exponent */ + } + } /* decrease */ + } /* non-zero */ + + /* Check for overflow [do not use Finalize in this case, as an */ + /* overflow here is a "don't fit" situation] */ + if (res->exponent>set->emax-res->digits+1) { /* too big */ + *status|=DEC_Invalid_operation; + break; + } + else { + decFinalize(res, set, &residue, status); /* set subnormal flags */ + *status&=~DEC_Underflow; /* suppress Underflow [754r] */ + } + } while(0); /* end protected */ + + #if DECSUBSET + if (allocrhs!=NULL) free(allocrhs); /* drop any storage used */ + if (alloclhs!=NULL) free(alloclhs); /* .. */ + #endif + return res; + } /* decQuantizeOp */ + +/* ------------------------------------------------------------------ */ +/* decCompareOp -- compare, min, or max two Numbers */ +/* */ +/* This computes C = A ? B and carries out one of four operations: */ +/* COMPARE -- returns the signum (as a number) giving the */ +/* result of a comparison unless one or both */ +/* operands is a NaN (in which case a NaN results) */ +/* COMPSIG -- as COMPARE except that a quiet NaN raises */ +/* Invalid operation. */ +/* COMPMAX -- returns the larger of the operands, using the */ +/* 754r maxnum operation */ +/* COMPMAXMAG -- ditto, comparing absolute values */ +/* COMPMIN -- the 754r minnum operation */ +/* COMPMINMAG -- ditto, comparing absolute values */ +/* COMTOTAL -- returns the signum (as a number) giving the */ +/* result of a comparison using 754r total ordering */ +/* */ +/* res is C, the result. C may be A and/or B (e.g., X=X?X) */ +/* lhs is A */ +/* rhs is B */ +/* set is the context */ +/* op is the operation flag */ +/* status is the usual accumulator */ +/* */ +/* C must have space for one digit for COMPARE or set->digits for */ +/* COMPMAX, COMPMIN, COMPMAXMAG, or COMPMINMAG. */ +/* ------------------------------------------------------------------ */ +/* The emphasis here is on speed for common cases, and avoiding */ +/* coefficient comparison if possible. */ +/* ------------------------------------------------------------------ */ +decNumber * decCompareOp(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set, + Flag op, uInt *status) { + #if DECSUBSET + decNumber *alloclhs=NULL; /* non-NULL if rounded lhs allocated */ + decNumber *allocrhs=NULL; /* .., rhs */ + #endif + Int result=0; /* default result value */ + uByte merged; /* work */ + + #if DECCHECK + if (decCheckOperands(res, lhs, rhs, set)) return res; + #endif + + do { /* protect allocated storage */ + #if DECSUBSET + if (!set->extended) { + /* reduce operands and set lostDigits status, as needed */ + if (lhs->digits>set->digits) { + alloclhs=decRoundOperand(lhs, set, status); + if (alloclhs==NULL) {result=BADINT; break;} + lhs=alloclhs; + } + if (rhs->digits>set->digits) { + allocrhs=decRoundOperand(rhs, set, status); + if (allocrhs==NULL) {result=BADINT; break;} + rhs=allocrhs; + } + } + #endif + /* [following code does not require input rounding] */ + + /* If total ordering then handle differing signs 'up front' */ + if (op==COMPTOTAL) { /* total ordering */ + if (decNumberIsNegative(lhs) & !decNumberIsNegative(rhs)) { + result=-1; + break; + } + if (!decNumberIsNegative(lhs) & decNumberIsNegative(rhs)) { + result=+1; + break; + } + } + + /* handle NaNs specially; let infinities drop through */ + /* This assumes sNaN (even just one) leads to NaN. */ + merged=(lhs->bits | rhs->bits) & (DECSNAN | DECNAN); + if (merged) { /* a NaN bit set */ + if (op==COMPARE); /* result will be NaN */ + else if (op==COMPSIG) /* treat qNaN as sNaN */ + *status|=DEC_Invalid_operation | DEC_sNaN; + else if (op==COMPTOTAL) { /* total ordering, always finite */ + /* signs are known to be the same; compute the ordering here */ + /* as if the signs are both positive, then invert for negatives */ + if (!decNumberIsNaN(lhs)) result=-1; + else if (!decNumberIsNaN(rhs)) result=+1; + /* here if both NaNs */ + else if (decNumberIsSNaN(lhs) && decNumberIsQNaN(rhs)) result=-1; + else if (decNumberIsQNaN(lhs) && decNumberIsSNaN(rhs)) result=+1; + else { /* both NaN or both sNaN */ + /* now it just depends on the payload */ + result=decUnitCompare(lhs->lsu, D2U(lhs->digits), + rhs->lsu, D2U(rhs->digits), 0); + /* [Error not possible, as these are 'aligned'] */ + } /* both same NaNs */ + if (decNumberIsNegative(lhs)) result=-result; + break; + } /* total order */ + + else if (merged & DECSNAN); /* sNaN -> qNaN */ + else { /* here if MIN or MAX and one or two quiet NaNs */ + /* min or max -- 754r rules ignore single NaN */ + if (!decNumberIsNaN(lhs) || !decNumberIsNaN(rhs)) { + /* just one NaN; force choice to be the non-NaN operand */ + op=COMPMAX; + if (lhs->bits & DECNAN) result=-1; /* pick rhs */ + else result=+1; /* pick lhs */ + break; + } + } /* max or min */ + op=COMPNAN; /* use special path */ + decNaNs(res, lhs, rhs, set, status); /* propagate NaN */ + break; + } + /* have numbers */ + if (op==COMPMAXMAG || op==COMPMINMAG) result=decCompare(lhs, rhs, 1); + else result=decCompare(lhs, rhs, 0); /* sign matters */ + } while(0); /* end protected */ + + if (result==BADINT) *status|=DEC_Insufficient_storage; /* rare */ + else { + if (op==COMPARE || op==COMPSIG ||op==COMPTOTAL) { /* returning signum */ + if (op==COMPTOTAL && result==0) { + /* operands are numerically equal or same NaN (and same sign, */ + /* tested first); if identical, leave result 0 */ + if (lhs->exponent!=rhs->exponent) { + if (lhs->exponent<rhs->exponent) result=-1; + else result=+1; + if (decNumberIsNegative(lhs)) result=-result; + } /* lexp!=rexp */ + } /* total-order by exponent */ + decNumberZero(res); /* [always a valid result] */ + if (result!=0) { /* must be -1 or +1 */ + *res->lsu=1; + if (result<0) res->bits=DECNEG; + } + } + else if (op==COMPNAN); /* special, drop through */ + else { /* MAX or MIN, non-NaN result */ + Int residue=0; /* rounding accumulator */ + /* choose the operand for the result */ + const decNumber *choice; + if (result==0) { /* operands are numerically equal */ + /* choose according to sign then exponent (see 754r) */ + uByte slhs=(lhs->bits & DECNEG); + uByte srhs=(rhs->bits & DECNEG); + #if DECSUBSET + if (!set->extended) { /* subset: force left-hand */ + op=COMPMAX; + result=+1; + } + else + #endif + if (slhs!=srhs) { /* signs differ */ + if (slhs) result=-1; /* rhs is max */ + else result=+1; /* lhs is max */ + } + else if (slhs && srhs) { /* both negative */ + if (lhs->exponent<rhs->exponent) result=+1; + else result=-1; + /* [if equal, use lhs, technically identical] */ + } + else { /* both positive */ + if (lhs->exponent>rhs->exponent) result=+1; + else result=-1; + /* [ditto] */ + } + } /* numerically equal */ + /* here result will be non-0; reverse if looking for MIN */ + if (op==COMPMIN || op==COMPMINMAG) result=-result; + choice=(result>0 ? lhs : rhs); /* choose */ + /* copy chosen to result, rounding if need be */ + decCopyFit(res, choice, set, &residue, status); + decFinish(res, set, &residue, status); + } + } + #if DECSUBSET + if (allocrhs!=NULL) free(allocrhs); /* free any storage used */ + if (alloclhs!=NULL) free(alloclhs); /* .. */ + #endif + return res; + } /* decCompareOp */ + +/* ------------------------------------------------------------------ */ +/* decCompare -- compare two decNumbers by numerical value */ +/* */ +/* This routine compares A ? B without altering them. */ +/* */ +/* Arg1 is A, a decNumber which is not a NaN */ +/* Arg2 is B, a decNumber which is not a NaN */ +/* Arg3 is 1 for a sign-independent compare, 0 otherwise */ +/* */ +/* returns -1, 0, or 1 for A<B, A==B, or A>B, or BADINT if failure */ +/* (the only possible failure is an allocation error) */ +/* ------------------------------------------------------------------ */ +static Int decCompare(const decNumber *lhs, const decNumber *rhs, + Flag abs) { + Int result; /* result value */ + Int sigr; /* rhs signum */ + Int compare; /* work */ + + result=1; /* assume signum(lhs) */ + if (ISZERO(lhs)) result=0; + if (abs) { + if (ISZERO(rhs)) return result; /* LHS wins or both 0 */ + /* RHS is non-zero */ + if (result==0) return -1; /* LHS is 0; RHS wins */ + /* [here, both non-zero, result=1] */ + } + else { /* signs matter */ + if (result && decNumberIsNegative(lhs)) result=-1; + sigr=1; /* compute signum(rhs) */ + if (ISZERO(rhs)) sigr=0; + else if (decNumberIsNegative(rhs)) sigr=-1; + if (result > sigr) return +1; /* L > R, return 1 */ + if (result < sigr) return -1; /* L < R, return -1 */ + if (result==0) return 0; /* both 0 */ + } + + /* signums are the same; both are non-zero */ + if ((lhs->bits | rhs->bits) & DECINF) { /* one or more infinities */ + if (decNumberIsInfinite(rhs)) { + if (decNumberIsInfinite(lhs)) result=0;/* both infinite */ + else result=-result; /* only rhs infinite */ + } + return result; + } + /* must compare the coefficients, allowing for exponents */ + if (lhs->exponent>rhs->exponent) { /* LHS exponent larger */ + /* swap sides, and sign */ + const decNumber *temp=lhs; + lhs=rhs; + rhs=temp; + result=-result; + } + compare=decUnitCompare(lhs->lsu, D2U(lhs->digits), + rhs->lsu, D2U(rhs->digits), + rhs->exponent-lhs->exponent); + if (compare!=BADINT) compare*=result; /* comparison succeeded */ + return compare; + } /* decCompare */ + +/* ------------------------------------------------------------------ */ +/* decUnitCompare -- compare two >=0 integers in Unit arrays */ +/* */ +/* This routine compares A ? B*10**E where A and B are unit arrays */ +/* A is a plain integer */ +/* B has an exponent of E (which must be non-negative) */ +/* */ +/* Arg1 is A first Unit (lsu) */ +/* Arg2 is A length in Units */ +/* Arg3 is B first Unit (lsu) */ +/* Arg4 is B length in Units */ +/* Arg5 is E (0 if the units are aligned) */ +/* */ +/* returns -1, 0, or 1 for A<B, A==B, or A>B, or BADINT if failure */ +/* (the only possible failure is an allocation error, which can */ +/* only occur if E!=0) */ +/* ------------------------------------------------------------------ */ +static Int decUnitCompare(const Unit *a, Int alength, + const Unit *b, Int blength, Int exp) { + Unit *acc; /* accumulator for result */ + Unit accbuff[SD2U(DECBUFFER*2+1)]; /* local buffer */ + Unit *allocacc=NULL; /* -> allocated acc buffer, iff allocated */ + Int accunits, need; /* units in use or needed for acc */ + const Unit *l, *r, *u; /* work */ + Int expunits, exprem, result; /* .. */ + + if (exp==0) { /* aligned; fastpath */ + if (alength>blength) return 1; + if (alength<blength) return -1; + /* same number of units in both -- need unit-by-unit compare */ + l=a+alength-1; + r=b+alength-1; + for (;l>=a; l--, r--) { + if (*l>*r) return 1; + if (*l<*r) return -1; + } + return 0; /* all units match */ + } /* aligned */ + + /* Unaligned. If one is >1 unit longer than the other, padded */ + /* approximately, then can return easily */ + if (alength>blength+(Int)D2U(exp)) return 1; + if (alength+1<blength+(Int)D2U(exp)) return -1; + + /* Need to do a real subtract. For this, a result buffer is needed */ + /* even though only the sign is of interest. Its length needs */ + /* to be the larger of alength and padded blength, +2 */ + need=blength+D2U(exp); /* maximum real length of B */ + if (need<alength) need=alength; + need+=2; + acc=accbuff; /* assume use local buffer */ + if (need*sizeof(Unit)>sizeof(accbuff)) { + allocacc=(Unit *)malloc(need*sizeof(Unit)); + if (allocacc==NULL) return BADINT; /* hopeless -- abandon */ + acc=allocacc; + } + /* Calculate units and remainder from exponent. */ + expunits=exp/DECDPUN; + exprem=exp%DECDPUN; + /* subtract [A+B*(-m)] */ + accunits=decUnitAddSub(a, alength, b, blength, expunits, acc, + -(Int)powers[exprem]); + /* [UnitAddSub result may have leading zeros, even on zero] */ + if (accunits<0) result=-1; /* negative result */ + else { /* non-negative result */ + /* check units of the result before freeing any storage */ + for (u=acc; u<acc+accunits-1 && *u==0;) u++; + result=(*u==0 ? 0 : +1); + } + /* clean up and return the result */ + if (allocacc!=NULL) free(allocacc); /* drop any storage used */ + return result; + } /* decUnitCompare */ + +/* ------------------------------------------------------------------ */ +/* decUnitAddSub -- add or subtract two >=0 integers in Unit arrays */ +/* */ +/* This routine performs the calculation: */ +/* */ +/* C=A+(B*M) */ +/* */ +/* Where M is in the range -DECDPUNMAX through +DECDPUNMAX. */ +/* */ +/* A may be shorter or longer than B. */ +/* */ +/* Leading zeros are not removed after a calculation. The result is */ +/* either the same length as the longer of A and B (adding any */ +/* shift), or one Unit longer than that (if a Unit carry occurred). */ +/* */ +/* A and B content are not altered unless C is also A or B. */ +/* C may be the same array as A or B, but only if no zero padding is */ +/* requested (that is, C may be B only if bshift==0). */ +/* C is filled from the lsu; only those units necessary to complete */ +/* the calculation are referenced. */ +/* */ +/* Arg1 is A first Unit (lsu) */ +/* Arg2 is A length in Units */ +/* Arg3 is B first Unit (lsu) */ +/* Arg4 is B length in Units */ +/* Arg5 is B shift in Units (>=0; pads with 0 units if positive) */ +/* Arg6 is C first Unit (lsu) */ +/* Arg7 is M, the multiplier */ +/* */ +/* returns the count of Units written to C, which will be non-zero */ +/* and negated if the result is negative. That is, the sign of the */ +/* returned Int is the sign of the result (positive for zero) and */ +/* the absolute value of the Int is the count of Units. */ +/* */ +/* It is the caller's responsibility to make sure that C size is */ +/* safe, allowing space if necessary for a one-Unit carry. */ +/* */ +/* This routine is severely performance-critical; *any* change here */ +/* must be measured (timed) to assure no performance degradation. */ +/* In particular, trickery here tends to be counter-productive, as */ +/* increased complexity of code hurts register optimizations on */ +/* register-poor architectures. Avoiding divisions is nearly */ +/* always a Good Idea, however. */ +/* */ +/* Special thanks to Rick McGuire (IBM Cambridge, MA) and Dave Clark */ +/* (IBM Warwick, UK) for some of the ideas used in this routine. */ +/* ------------------------------------------------------------------ */ +static Int decUnitAddSub(const Unit *a, Int alength, + const Unit *b, Int blength, Int bshift, + Unit *c, Int m) { + const Unit *alsu=a; /* A lsu [need to remember it] */ + Unit *clsu=c; /* C ditto */ + Unit *minC; /* low water mark for C */ + Unit *maxC; /* high water mark for C */ + eInt carry=0; /* carry integer (could be Long) */ + Int add; /* work */ + #if DECDPUN<=4 /* myriadal, millenary, etc. */ + Int est; /* estimated quotient */ + #endif + + #if DECTRACE + if (alength<1 || blength<1) + printf("decUnitAddSub: alen blen m %ld %ld [%ld]\n", alength, blength, m); + #endif + + maxC=c+alength; /* A is usually the longer */ + minC=c+blength; /* .. and B the shorter */ + if (bshift!=0) { /* B is shifted; low As copy across */ + minC+=bshift; + /* if in place [common], skip copy unless there's a gap [rare] */ + if (a==c && bshift<=alength) { + c+=bshift; + a+=bshift; + } + else for (; c<clsu+bshift; a++, c++) { /* copy needed */ + if (a<alsu+alength) *c=*a; + else *c=0; + } + } + if (minC>maxC) { /* swap */ + Unit *hold=minC; + minC=maxC; + maxC=hold; + } + + /* For speed, do the addition as two loops; the first where both A */ + /* and B contribute, and the second (if necessary) where only one or */ + /* other of the numbers contribute. */ + /* Carry handling is the same (i.e., duplicated) in each case. */ + for (; c<minC; c++) { + carry+=*a; + a++; + carry+=((eInt)*b)*m; /* [special-casing m=1/-1 */ + b++; /* here is not a win] */ + /* here carry is new Unit of digits; it could be +ve or -ve */ + if ((ueInt)carry<=DECDPUNMAX) { /* fastpath 0-DECDPUNMAX */ + *c=(Unit)carry; + carry=0; + continue; + } + #if DECDPUN==4 /* use divide-by-multiply */ + if (carry>=0) { + est=(((ueInt)carry>>11)*53687)>>18; + *c=(Unit)(carry-est*(DECDPUNMAX+1)); /* remainder */ + carry=est; /* likely quotient [89%] */ + if (*c<DECDPUNMAX+1) continue; /* estimate was correct */ + carry++; + *c-=DECDPUNMAX+1; + continue; + } + /* negative case */ + carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */ + est=(((ueInt)carry>>11)*53687)>>18; + *c=(Unit)(carry-est*(DECDPUNMAX+1)); + carry=est-(DECDPUNMAX+1); /* correctly negative */ + if (*c<DECDPUNMAX+1) continue; /* was OK */ + carry++; + *c-=DECDPUNMAX+1; + #elif DECDPUN==3 + if (carry>=0) { + est=(((ueInt)carry>>3)*16777)>>21; + *c=(Unit)(carry-est*(DECDPUNMAX+1)); /* remainder */ + carry=est; /* likely quotient [99%] */ + if (*c<DECDPUNMAX+1) continue; /* estimate was correct */ + carry++; + *c-=DECDPUNMAX+1; + continue; + } + /* negative case */ + carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */ + est=(((ueInt)carry>>3)*16777)>>21; + *c=(Unit)(carry-est*(DECDPUNMAX+1)); + carry=est-(DECDPUNMAX+1); /* correctly negative */ + if (*c<DECDPUNMAX+1) continue; /* was OK */ + carry++; + *c-=DECDPUNMAX+1; + #elif DECDPUN<=2 + /* Can use QUOT10 as carry <= 4 digits */ + if (carry>=0) { + est=QUOT10(carry, DECDPUN); + *c=(Unit)(carry-est*(DECDPUNMAX+1)); /* remainder */ + carry=est; /* quotient */ + continue; + } + /* negative case */ + carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */ + est=QUOT10(carry, DECDPUN); + *c=(Unit)(carry-est*(DECDPUNMAX+1)); + carry=est-(DECDPUNMAX+1); /* correctly negative */ + #else + /* remainder operator is undefined if negative, so must test */ + if ((ueInt)carry<(DECDPUNMAX+1)*2) { /* fastpath carry +1 */ + *c=(Unit)(carry-(DECDPUNMAX+1)); /* [helps additions] */ + carry=1; + continue; + } + if (carry>=0) { + *c=(Unit)(carry%(DECDPUNMAX+1)); + carry=carry/(DECDPUNMAX+1); + continue; + } + /* negative case */ + carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */ + *c=(Unit)(carry%(DECDPUNMAX+1)); + carry=carry/(DECDPUNMAX+1)-(DECDPUNMAX+1); + #endif + } /* c */ + + /* now may have one or other to complete */ + /* [pretest to avoid loop setup/shutdown] */ + if (c<maxC) for (; c<maxC; c++) { + if (a<alsu+alength) { /* still in A */ + carry+=*a; + a++; + } + else { /* inside B */ + carry+=((eInt)*b)*m; + b++; + } + /* here carry is new Unit of digits; it could be +ve or -ve and */ + /* magnitude up to DECDPUNMAX squared */ + if ((ueInt)carry<=DECDPUNMAX) { /* fastpath 0-DECDPUNMAX */ + *c=(Unit)carry; + carry=0; + continue; + } + /* result for this unit is negative or >DECDPUNMAX */ + #if DECDPUN==4 /* use divide-by-multiply */ + if (carry>=0) { + est=(((ueInt)carry>>11)*53687)>>18; + *c=(Unit)(carry-est*(DECDPUNMAX+1)); /* remainder */ + carry=est; /* likely quotient [79.7%] */ + if (*c<DECDPUNMAX+1) continue; /* estimate was correct */ + carry++; + *c-=DECDPUNMAX+1; + continue; + } + /* negative case */ + carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */ + est=(((ueInt)carry>>11)*53687)>>18; + *c=(Unit)(carry-est*(DECDPUNMAX+1)); + carry=est-(DECDPUNMAX+1); /* correctly negative */ + if (*c<DECDPUNMAX+1) continue; /* was OK */ + carry++; + *c-=DECDPUNMAX+1; + #elif DECDPUN==3 + if (carry>=0) { + est=(((ueInt)carry>>3)*16777)>>21; + *c=(Unit)(carry-est*(DECDPUNMAX+1)); /* remainder */ + carry=est; /* likely quotient [99%] */ + if (*c<DECDPUNMAX+1) continue; /* estimate was correct */ + carry++; + *c-=DECDPUNMAX+1; + continue; + } + /* negative case */ + carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */ + est=(((ueInt)carry>>3)*16777)>>21; + *c=(Unit)(carry-est*(DECDPUNMAX+1)); + carry=est-(DECDPUNMAX+1); /* correctly negative */ + if (*c<DECDPUNMAX+1) continue; /* was OK */ + carry++; + *c-=DECDPUNMAX+1; + #elif DECDPUN<=2 + if (carry>=0) { + est=QUOT10(carry, DECDPUN); + *c=(Unit)(carry-est*(DECDPUNMAX+1)); /* remainder */ + carry=est; /* quotient */ + continue; + } + /* negative case */ + carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */ + est=QUOT10(carry, DECDPUN); + *c=(Unit)(carry-est*(DECDPUNMAX+1)); + carry=est-(DECDPUNMAX+1); /* correctly negative */ + #else + if ((ueInt)carry<(DECDPUNMAX+1)*2){ /* fastpath carry 1 */ + *c=(Unit)(carry-(DECDPUNMAX+1)); + carry=1; + continue; + } + /* remainder operator is undefined if negative, so must test */ + if (carry>=0) { + *c=(Unit)(carry%(DECDPUNMAX+1)); + carry=carry/(DECDPUNMAX+1); + continue; + } + /* negative case */ + carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */ + *c=(Unit)(carry%(DECDPUNMAX+1)); + carry=carry/(DECDPUNMAX+1)-(DECDPUNMAX+1); + #endif + } /* c */ + + /* OK, all A and B processed; might still have carry or borrow */ + /* return number of Units in the result, negated if a borrow */ + if (carry==0) return c-clsu; /* no carry, so no more to do */ + if (carry>0) { /* positive carry */ + *c=(Unit)carry; /* place as new unit */ + c++; /* .. */ + return c-clsu; + } + /* -ve carry: it's a borrow; complement needed */ + add=1; /* temporary carry... */ + for (c=clsu; c<maxC; c++) { + add=DECDPUNMAX+add-*c; + if (add<=DECDPUNMAX) { + *c=(Unit)add; + add=0; + } + else { + *c=0; + add=1; + } + } + /* add an extra unit iff it would be non-zero */ + #if DECTRACE + printf("UAS borrow: add %ld, carry %ld\n", add, carry); + #endif + if ((add-carry-1)!=0) { + *c=(Unit)(add-carry-1); + c++; /* interesting, include it */ + } + return clsu-c; /* -ve result indicates borrowed */ + } /* decUnitAddSub */ + +/* ------------------------------------------------------------------ */ +/* decTrim -- trim trailing zeros or normalize */ +/* */ +/* dn is the number to trim or normalize */ +/* set is the context to use to check for clamp */ +/* all is 1 to remove all trailing zeros, 0 for just fraction ones */ +/* dropped returns the number of discarded trailing zeros */ +/* returns dn */ +/* */ +/* If clamp is set in the context then the number of zeros trimmed */ +/* may be limited if the exponent is high. */ +/* All fields are updated as required. This is a utility operation, */ +/* so special values are unchanged and no error is possible. */ +/* ------------------------------------------------------------------ */ +static decNumber * decTrim(decNumber *dn, decContext *set, Flag all, + Int *dropped) { + Int d, exp; /* work */ + uInt cut; /* .. */ + Unit *up; /* -> current Unit */ + + #if DECCHECK + if (decCheckOperands(dn, DECUNUSED, DECUNUSED, DECUNCONT)) return dn; + #endif + + *dropped=0; /* assume no zeros dropped */ + if ((dn->bits & DECSPECIAL) /* fast exit if special .. */ + || (*dn->lsu & 0x01)) return dn; /* .. or odd */ + if (ISZERO(dn)) { /* .. or 0 */ + dn->exponent=0; /* (sign is preserved) */ + return dn; + } + + /* have a finite number which is even */ + exp=dn->exponent; + cut=1; /* digit (1-DECDPUN) in Unit */ + up=dn->lsu; /* -> current Unit */ + for (d=0; d<dn->digits-1; d++) { /* [don't strip the final digit] */ + /* slice by powers */ + #if DECDPUN<=4 + uInt quot=QUOT10(*up, cut); + if ((*up-quot*powers[cut])!=0) break; /* found non-0 digit */ + #else + if (*up%powers[cut]!=0) break; /* found non-0 digit */ + #endif + /* have a trailing 0 */ + if (!all) { /* trimming */ + /* [if exp>0 then all trailing 0s are significant for trim] */ + if (exp<=0) { /* if digit might be significant */ + if (exp==0) break; /* then quit */ + exp++; /* next digit might be significant */ + } + } + cut++; /* next power */ + if (cut>DECDPUN) { /* need new Unit */ + up++; + cut=1; + } + } /* d */ + if (d==0) return dn; /* none to drop */ + + /* may need to limit drop if clamping */ + if (set->clamp) { + Int maxd=set->emax-set->digits+1-dn->exponent; + if (maxd<=0) return dn; /* nothing possible */ + if (d>maxd) d=maxd; + } + + /* effect the drop */ + decShiftToLeast(dn->lsu, D2U(dn->digits), d); + dn->exponent+=d; /* maintain numerical value */ + dn->digits-=d; /* new length */ + *dropped=d; /* report the count */ + return dn; + } /* decTrim */ + +/* ------------------------------------------------------------------ */ +/* decReverse -- reverse a Unit array in place */ +/* */ +/* ulo is the start of the array */ +/* uhi is the end of the array (highest Unit to include) */ +/* */ +/* The units ulo through uhi are reversed in place (if the number */ +/* of units is odd, the middle one is untouched). Note that the */ +/* digit(s) in each unit are unaffected. */ +/* ------------------------------------------------------------------ */ +static void decReverse(Unit *ulo, Unit *uhi) { + Unit temp; + for (; ulo<uhi; ulo++, uhi--) { + temp=*ulo; + *ulo=*uhi; + *uhi=temp; + } + return; + } /* decReverse */ + +/* ------------------------------------------------------------------ */ +/* decShiftToMost -- shift digits in array towards most significant */ +/* */ +/* uar is the array */ +/* digits is the count of digits in use in the array */ +/* shift is the number of zeros to pad with (least significant); */ +/* it must be zero or positive */ +/* */ +/* returns the new length of the integer in the array, in digits */ +/* */ +/* No overflow is permitted (that is, the uar array must be known to */ +/* be large enough to hold the result, after shifting). */ +/* ------------------------------------------------------------------ */ +static Int decShiftToMost(Unit *uar, Int digits, Int shift) { + Unit *target, *source, *first; /* work */ + Int cut; /* odd 0's to add */ + uInt next; /* work */ + + if (shift==0) return digits; /* [fastpath] nothing to do */ + if ((digits+shift)<=DECDPUN) { /* [fastpath] single-unit case */ + *uar=(Unit)(*uar*powers[shift]); + return digits+shift; + } + + next=0; /* all paths */ + source=uar+D2U(digits)-1; /* where msu comes from */ + target=source+D2U(shift); /* where upper part of first cut goes */ + cut=DECDPUN-MSUDIGITS(shift); /* where to slice */ + if (cut==0) { /* unit-boundary case */ + for (; source>=uar; source--, target--) *target=*source; + } + else { + first=uar+D2U(digits+shift)-1; /* where msu of source will end up */ + for (; source>=uar; source--, target--) { + /* split the source Unit and accumulate remainder for next */ + #if DECDPUN<=4 + uInt quot=QUOT10(*source, cut); + uInt rem=*source-quot*powers[cut]; + next+=quot; + #else + uInt rem=*source%powers[cut]; + next+=*source/powers[cut]; + #endif + if (target<=first) *target=(Unit)next; /* write to target iff valid */ + next=rem*powers[DECDPUN-cut]; /* save remainder for next Unit */ + } + } /* shift-move */ + + /* propagate any partial unit to one below and clear the rest */ + for (; target>=uar; target--) { + *target=(Unit)next; + next=0; + } + return digits+shift; + } /* decShiftToMost */ + +/* ------------------------------------------------------------------ */ +/* decShiftToLeast -- shift digits in array towards least significant */ +/* */ +/* uar is the array */ +/* units is length of the array, in units */ +/* shift is the number of digits to remove from the lsu end; it */ +/* must be zero or positive and <= than units*DECDPUN. */ +/* */ +/* returns the new length of the integer in the array, in units */ +/* */ +/* Removed digits are discarded (lost). Units not required to hold */ +/* the final result are unchanged. */ +/* ------------------------------------------------------------------ */ +static Int decShiftToLeast(Unit *uar, Int units, Int shift) { + Unit *target, *up; /* work */ + Int cut, count; /* work */ + Int quot, rem; /* for division */ + + if (shift==0) return units; /* [fastpath] nothing to do */ + if (shift==units*DECDPUN) { /* [fastpath] little to do */ + *uar=0; /* all digits cleared gives zero */ + return 1; /* leaves just the one */ + } + + target=uar; /* both paths */ + cut=MSUDIGITS(shift); + if (cut==DECDPUN) { /* unit-boundary case; easy */ + up=uar+D2U(shift); + for (; up<uar+units; target++, up++) *target=*up; + return target-uar; + } + + /* messier */ + up=uar+D2U(shift-cut); /* source; correct to whole Units */ + count=units*DECDPUN-shift; /* the maximum new length */ + #if DECDPUN<=4 + quot=QUOT10(*up, cut); + #else + quot=*up/powers[cut]; + #endif + for (; ; target++) { + *target=(Unit)quot; + count-=(DECDPUN-cut); + if (count<=0) break; + up++; + quot=*up; + #if DECDPUN<=4 + quot=QUOT10(quot, cut); + rem=*up-quot*powers[cut]; + #else + rem=quot%powers[cut]; + quot=quot/powers[cut]; + #endif + *target=(Unit)(*target+rem*powers[DECDPUN-cut]); + count-=cut; + if (count<=0) break; + } + return target-uar+1; + } /* decShiftToLeast */ + +#if DECSUBSET +/* ------------------------------------------------------------------ */ +/* decRoundOperand -- round an operand [used for subset only] */ +/* */ +/* dn is the number to round (dn->digits is > set->digits) */ +/* set is the relevant context */ +/* status is the status accumulator */ +/* */ +/* returns an allocated decNumber with the rounded result. */ +/* */ +/* lostDigits and other status may be set by this. */ +/* */ +/* Since the input is an operand, it must not be modified. */ +/* Instead, return an allocated decNumber, rounded as required. */ +/* It is the caller's responsibility to free the allocated storage. */ +/* */ +/* If no storage is available then the result cannot be used, so NULL */ +/* is returned. */ +/* ------------------------------------------------------------------ */ +static decNumber *decRoundOperand(const decNumber *dn, decContext *set, + uInt *status) { + decNumber *res; /* result structure */ + uInt newstatus=0; /* status from round */ + Int residue=0; /* rounding accumulator */ + + /* Allocate storage for the returned decNumber, big enough for the */ + /* length specified by the context */ + res=(decNumber *)malloc(sizeof(decNumber) + +(D2U(set->digits)-1)*sizeof(Unit)); + if (res==NULL) { + *status|=DEC_Insufficient_storage; + return NULL; + } + decCopyFit(res, dn, set, &residue, &newstatus); + decApplyRound(res, set, residue, &newstatus); + + /* If that set Inexact then "lost digits" is raised... */ + if (newstatus & DEC_Inexact) newstatus|=DEC_Lost_digits; + *status|=newstatus; + return res; + } /* decRoundOperand */ +#endif + +/* ------------------------------------------------------------------ */ +/* decCopyFit -- copy a number, truncating the coefficient if needed */ +/* */ +/* dest is the target decNumber */ +/* src is the source decNumber */ +/* set is the context [used for length (digits) and rounding mode] */ +/* residue is the residue accumulator */ +/* status contains the current status to be updated */ +/* */ +/* (dest==src is allowed and will be a no-op if fits) */ +/* All fields are updated as required. */ +/* ------------------------------------------------------------------ */ +static void decCopyFit(decNumber *dest, const decNumber *src, + decContext *set, Int *residue, uInt *status) { + dest->bits=src->bits; + dest->exponent=src->exponent; + decSetCoeff(dest, set, src->lsu, src->digits, residue, status); + } /* decCopyFit */ + +/* ------------------------------------------------------------------ */ +/* decSetCoeff -- set the coefficient of a number */ +/* */ +/* dn is the number whose coefficient array is to be set. */ +/* It must have space for set->digits digits */ +/* set is the context [for size] */ +/* lsu -> lsu of the source coefficient [may be dn->lsu] */ +/* len is digits in the source coefficient [may be dn->digits] */ +/* residue is the residue accumulator. This has values as in */ +/* decApplyRound, and will be unchanged unless the */ +/* target size is less than len. In this case, the */ +/* coefficient is truncated and the residue is updated to */ +/* reflect the previous residue and the dropped digits. */ +/* status is the status accumulator, as usual */ +/* */ +/* The coefficient may already be in the number, or it can be an */ +/* external intermediate array. If it is in the number, lsu must == */ +/* dn->lsu and len must == dn->digits. */ +/* */ +/* Note that the coefficient length (len) may be < set->digits, and */ +/* in this case this merely copies the coefficient (or is a no-op */ +/* if dn->lsu==lsu). */ +/* */ +/* Note also that (only internally, from decQuantizeOp and */ +/* decSetSubnormal) the value of set->digits may be less than one, */ +/* indicating a round to left. This routine handles that case */ +/* correctly; caller ensures space. */ +/* */ +/* dn->digits, dn->lsu (and as required), and dn->exponent are */ +/* updated as necessary. dn->bits (sign) is unchanged. */ +/* */ +/* DEC_Rounded status is set if any digits are discarded. */ +/* DEC_Inexact status is set if any non-zero digits are discarded, or */ +/* incoming residue was non-0 (implies rounded) */ +/* ------------------------------------------------------------------ */ +/* mapping array: maps 0-9 to canonical residues, so that a residue */ +/* can be adjusted in the range [-1, +1] and achieve correct rounding */ +/* 0 1 2 3 4 5 6 7 8 9 */ +static const uByte resmap[10]={0, 3, 3, 3, 3, 5, 7, 7, 7, 7}; +static void decSetCoeff(decNumber *dn, decContext *set, const Unit *lsu, + Int len, Int *residue, uInt *status) { + Int discard; /* number of digits to discard */ + uInt cut; /* cut point in Unit */ + const Unit *up; /* work */ + Unit *target; /* .. */ + Int count; /* .. */ + #if DECDPUN<=4 + uInt temp; /* .. */ + #endif + + discard=len-set->digits; /* digits to discard */ + if (discard<=0) { /* no digits are being discarded */ + if (dn->lsu!=lsu) { /* copy needed */ + /* copy the coefficient array to the result number; no shift needed */ + count=len; /* avoids D2U */ + up=lsu; + for (target=dn->lsu; count>0; target++, up++, count-=DECDPUN) + *target=*up; + dn->digits=len; /* set the new length */ + } + /* dn->exponent and residue are unchanged, record any inexactitude */ + if (*residue!=0) *status|=(DEC_Inexact | DEC_Rounded); + return; + } + + /* some digits must be discarded ... */ + dn->exponent+=discard; /* maintain numerical value */ + *status|=DEC_Rounded; /* accumulate Rounded status */ + if (*residue>1) *residue=1; /* previous residue now to right, so reduce */ + + if (discard>len) { /* everything, +1, is being discarded */ + /* guard digit is 0 */ + /* residue is all the number [NB could be all 0s] */ + if (*residue<=0) { /* not already positive */ + count=len; /* avoids D2U */ + for (up=lsu; count>0; up++, count-=DECDPUN) if (*up!=0) { /* found non-0 */ + *residue=1; + break; /* no need to check any others */ + } + } + if (*residue!=0) *status|=DEC_Inexact; /* record inexactitude */ + *dn->lsu=0; /* coefficient will now be 0 */ + dn->digits=1; /* .. */ + return; + } /* total discard */ + + /* partial discard [most common case] */ + /* here, at least the first (most significant) discarded digit exists */ + + /* spin up the number, noting residue during the spin, until get to */ + /* the Unit with the first discarded digit. When reach it, extract */ + /* it and remember its position */ + count=0; + for (up=lsu;; up++) { + count+=DECDPUN; + if (count>=discard) break; /* full ones all checked */ + if (*up!=0) *residue=1; + } /* up */ + + /* here up -> Unit with first discarded digit */ + cut=discard-(count-DECDPUN)-1; + if (cut==DECDPUN-1) { /* unit-boundary case (fast) */ + Unit half=(Unit)powers[DECDPUN]>>1; + /* set residue directly */ + if (*up>=half) { + if (*up>half) *residue=7; + else *residue+=5; /* add sticky bit */ + } + else { /* <half */ + if (*up!=0) *residue=3; /* [else is 0, leave as sticky bit] */ + } + if (set->digits<=0) { /* special for Quantize/Subnormal :-( */ + *dn->lsu=0; /* .. result is 0 */ + dn->digits=1; /* .. */ + } + else { /* shift to least */ + count=set->digits; /* now digits to end up with */ + dn->digits=count; /* set the new length */ + up++; /* move to next */ + /* on unit boundary, so shift-down copy loop is simple */ + for (target=dn->lsu; count>0; target++, up++, count-=DECDPUN) + *target=*up; + } + } /* unit-boundary case */ + + else { /* discard digit is in low digit(s), and not top digit */ + uInt discard1; /* first discarded digit */ + uInt quot, rem; /* for divisions */ + if (cut==0) quot=*up; /* is at bottom of unit */ + else /* cut>0 */ { /* it's not at bottom of unit */ + #if DECDPUN<=4 + quot=QUOT10(*up, cut); + rem=*up-quot*powers[cut]; + #else + rem=*up%powers[cut]; + quot=*up/powers[cut]; + #endif + if (rem!=0) *residue=1; + } + /* discard digit is now at bottom of quot */ + #if DECDPUN<=4 + temp=(quot*6554)>>16; /* fast /10 */ + /* Vowels algorithm here not a win (9 instructions) */ + discard1=quot-X10(temp); + quot=temp; + #else + discard1=quot%10; + quot=quot/10; + #endif + /* here, discard1 is the guard digit, and residue is everything */ + /* else [use mapping array to accumulate residue safely] */ + *residue+=resmap[discard1]; + cut++; /* update cut */ + /* here: up -> Unit of the array with bottom digit */ + /* cut is the division point for each Unit */ + /* quot holds the uncut high-order digits for the current unit */ + if (set->digits<=0) { /* special for Quantize/Subnormal :-( */ + *dn->lsu=0; /* .. result is 0 */ + dn->digits=1; /* .. */ + } + else { /* shift to least needed */ + count=set->digits; /* now digits to end up with */ + dn->digits=count; /* set the new length */ + /* shift-copy the coefficient array to the result number */ + for (target=dn->lsu; ; target++) { + *target=(Unit)quot; + count-=(DECDPUN-cut); + if (count<=0) break; + up++; + quot=*up; + #if DECDPUN<=4 + quot=QUOT10(quot, cut); + rem=*up-quot*powers[cut]; + #else + rem=quot%powers[cut]; + quot=quot/powers[cut]; + #endif + *target=(Unit)(*target+rem*powers[DECDPUN-cut]); + count-=cut; + if (count<=0) break; + } /* shift-copy loop */ + } /* shift to least */ + } /* not unit boundary */ + + if (*residue!=0) *status|=DEC_Inexact; /* record inexactitude */ + return; + } /* decSetCoeff */ + +/* ------------------------------------------------------------------ */ +/* decApplyRound -- apply pending rounding to a number */ +/* */ +/* dn is the number, with space for set->digits digits */ +/* set is the context [for size and rounding mode] */ +/* residue indicates pending rounding, being any accumulated */ +/* guard and sticky information. It may be: */ +/* 6-9: rounding digit is >5 */ +/* 5: rounding digit is exactly half-way */ +/* 1-4: rounding digit is <5 and >0 */ +/* 0: the coefficient is exact */ +/* -1: as 1, but the hidden digits are subtractive, that */ +/* is, of the opposite sign to dn. In this case the */ +/* coefficient must be non-0. This case occurs when */ +/* subtracting a small number (which can be reduced to */ +/* a sticky bit); see decAddOp. */ +/* status is the status accumulator, as usual */ +/* */ +/* This routine applies rounding while keeping the length of the */ +/* coefficient constant. The exponent and status are unchanged */ +/* except if: */ +/* */ +/* -- the coefficient was increased and is all nines (in which */ +/* case Overflow could occur, and is handled directly here so */ +/* the caller does not need to re-test for overflow) */ +/* */ +/* -- the coefficient was decreased and becomes all nines (in which */ +/* case Underflow could occur, and is also handled directly). */ +/* */ +/* All fields in dn are updated as required. */ +/* */ +/* ------------------------------------------------------------------ */ +static void decApplyRound(decNumber *dn, decContext *set, Int residue, + uInt *status) { + Int bump; /* 1 if coefficient needs to be incremented */ + /* -1 if coefficient needs to be decremented */ + + if (residue==0) return; /* nothing to apply */ + + bump=0; /* assume a smooth ride */ + + /* now decide whether, and how, to round, depending on mode */ + switch (set->round) { + case DEC_ROUND_05UP: { /* round zero or five up (for reround) */ + /* This is the same as DEC_ROUND_DOWN unless there is a */ + /* positive residue and the lsd of dn is 0 or 5, in which case */ + /* it is bumped; when residue is <0, the number is therefore */ + /* bumped down unless the final digit was 1 or 6 (in which */ + /* case it is bumped down and then up -- a no-op) */ + Int lsd5=*dn->lsu%5; /* get lsd and quintate */ + if (residue<0 && lsd5!=1) bump=-1; + else if (residue>0 && lsd5==0) bump=1; + /* [bump==1 could be applied directly; use common path for clarity] */ + break;} /* r-05 */ + + case DEC_ROUND_DOWN: { + /* no change, except if negative residue */ + if (residue<0) bump=-1; + break;} /* r-d */ + + case DEC_ROUND_HALF_DOWN: { + if (residue>5) bump=1; + break;} /* r-h-d */ + + case DEC_ROUND_HALF_EVEN: { + if (residue>5) bump=1; /* >0.5 goes up */ + else if (residue==5) { /* exactly 0.5000... */ + /* 0.5 goes up iff [new] lsd is odd */ + if (*dn->lsu & 0x01) bump=1; + } + break;} /* r-h-e */ + + case DEC_ROUND_HALF_UP: { + if (residue>=5) bump=1; + break;} /* r-h-u */ + + case DEC_ROUND_UP: { + if (residue>0) bump=1; + break;} /* r-u */ + + case DEC_ROUND_CEILING: { + /* same as _UP for positive numbers, and as _DOWN for negatives */ + /* [negative residue cannot occur on 0] */ + if (decNumberIsNegative(dn)) { + if (residue<0) bump=-1; + } + else { + if (residue>0) bump=1; + } + break;} /* r-c */ + + case DEC_ROUND_FLOOR: { + /* same as _UP for negative numbers, and as _DOWN for positive */ + /* [negative residue cannot occur on 0] */ + if (!decNumberIsNegative(dn)) { + if (residue<0) bump=-1; + } + else { + if (residue>0) bump=1; + } + break;} /* r-f */ + + default: { /* e.g., DEC_ROUND_MAX */ + *status|=DEC_Invalid_context; + #if DECTRACE || (DECCHECK && DECVERB) + printf("Unknown rounding mode: %d\n", set->round); + #endif + break;} + } /* switch */ + + /* now bump the number, up or down, if need be */ + if (bump==0) return; /* no action required */ + + /* Simply use decUnitAddSub unless bumping up and the number is */ + /* all nines. In this special case set to 100... explicitly */ + /* and adjust the exponent by one (as otherwise could overflow */ + /* the array) */ + /* Similarly handle all-nines result if bumping down. */ + if (bump>0) { + Unit *up; /* work */ + uInt count=dn->digits; /* digits to be checked */ + for (up=dn->lsu; ; up++) { + if (count<=DECDPUN) { + /* this is the last Unit (the msu) */ + if (*up!=powers[count]-1) break; /* not still 9s */ + /* here if it, too, is all nines */ + *up=(Unit)powers[count-1]; /* here 999 -> 100 etc. */ + for (up=up-1; up>=dn->lsu; up--) *up=0; /* others all to 0 */ + dn->exponent++; /* and bump exponent */ + /* [which, very rarely, could cause Overflow...] */ + if ((dn->exponent+dn->digits)>set->emax+1) { + decSetOverflow(dn, set, status); + } + return; /* done */ + } + /* a full unit to check, with more to come */ + if (*up!=DECDPUNMAX) break; /* not still 9s */ + count-=DECDPUN; + } /* up */ + } /* bump>0 */ + else { /* -1 */ + /* here checking for a pre-bump of 1000... (leading 1, all */ + /* other digits zero) */ + Unit *up, *sup; /* work */ + uInt count=dn->digits; /* digits to be checked */ + for (up=dn->lsu; ; up++) { + if (count<=DECDPUN) { + /* this is the last Unit (the msu) */ + if (*up!=powers[count-1]) break; /* not 100.. */ + /* here if have the 1000... case */ + sup=up; /* save msu pointer */ + *up=(Unit)powers[count]-1; /* here 100 in msu -> 999 */ + /* others all to all-nines, too */ + for (up=up-1; up>=dn->lsu; up--) *up=(Unit)powers[DECDPUN]-1; + dn->exponent--; /* and bump exponent */ + + /* iff the number was at the subnormal boundary (exponent=etiny) */ + /* then the exponent is now out of range, so it will in fact get */ + /* clamped to etiny and the final 9 dropped. */ + /* printf(">> emin=%d exp=%d sdig=%d\n", set->emin, */ + /* dn->exponent, set->digits); */ + if (dn->exponent+1==set->emin-set->digits+1) { + if (count==1 && dn->digits==1) *sup=0; /* here 9 -> 0[.9] */ + else { + *sup=(Unit)powers[count-1]-1; /* here 999.. in msu -> 99.. */ + dn->digits--; + } + dn->exponent++; + *status|=DEC_Underflow | DEC_Subnormal | DEC_Inexact | DEC_Rounded; + } + return; /* done */ + } + + /* a full unit to check, with more to come */ + if (*up!=0) break; /* not still 0s */ + count-=DECDPUN; + } /* up */ + + } /* bump<0 */ + + /* Actual bump needed. Do it. */ + decUnitAddSub(dn->lsu, D2U(dn->digits), uarrone, 1, 0, dn->lsu, bump); + } /* decApplyRound */ + +#if DECSUBSET +/* ------------------------------------------------------------------ */ +/* decFinish -- finish processing a number */ +/* */ +/* dn is the number */ +/* set is the context */ +/* residue is the rounding accumulator (as in decApplyRound) */ +/* status is the accumulator */ +/* */ +/* This finishes off the current number by: */ +/* 1. If not extended: */ +/* a. Converting a zero result to clean '0' */ +/* b. Reducing positive exponents to 0, if would fit in digits */ +/* 2. Checking for overflow and subnormals (always) */ +/* Note this is just Finalize when no subset arithmetic. */ +/* All fields are updated as required. */ +/* ------------------------------------------------------------------ */ +static void decFinish(decNumber *dn, decContext *set, Int *residue, + uInt *status) { + if (!set->extended) { + if ISZERO(dn) { /* value is zero */ + dn->exponent=0; /* clean exponent .. */ + dn->bits=0; /* .. and sign */ + return; /* no error possible */ + } + if (dn->exponent>=0) { /* non-negative exponent */ + /* >0; reduce to integer if possible */ + if (set->digits >= (dn->exponent+dn->digits)) { + dn->digits=decShiftToMost(dn->lsu, dn->digits, dn->exponent); + dn->exponent=0; + } + } + } /* !extended */ + + decFinalize(dn, set, residue, status); + } /* decFinish */ +#endif + +/* ------------------------------------------------------------------ */ +/* decFinalize -- final check, clamp, and round of a number */ +/* */ +/* dn is the number */ +/* set is the context */ +/* residue is the rounding accumulator (as in decApplyRound) */ +/* status is the status accumulator */ +/* */ +/* This finishes off the current number by checking for subnormal */ +/* results, applying any pending rounding, checking for overflow, */ +/* and applying any clamping. */ +/* Underflow and overflow conditions are raised as appropriate. */ +/* All fields are updated as required. */ +/* ------------------------------------------------------------------ */ +static void decFinalize(decNumber *dn, decContext *set, Int *residue, + uInt *status) { + Int shift; /* shift needed if clamping */ + Int tinyexp=set->emin-dn->digits+1; /* precalculate subnormal boundary */ + + /* Must be careful, here, when checking the exponent as the */ + /* adjusted exponent could overflow 31 bits [because it may already */ + /* be up to twice the expected]. */ + + /* First test for subnormal. This must be done before any final */ + /* round as the result could be rounded to Nmin or 0. */ + if (dn->exponent<=tinyexp) { /* prefilter */ + Int comp; + decNumber nmin; + /* A very nasty case here is dn == Nmin and residue<0 */ + if (dn->exponent<tinyexp) { + /* Go handle subnormals; this will apply round if needed. */ + decSetSubnormal(dn, set, residue, status); + return; + } + /* Equals case: only subnormal if dn=Nmin and negative residue */ + decNumberZero(&nmin); + nmin.lsu[0]=1; + nmin.exponent=set->emin; + comp=decCompare(dn, &nmin, 1); /* (signless compare) */ + if (comp==BADINT) { /* oops */ + *status|=DEC_Insufficient_storage; /* abandon... */ + return; + } + if (*residue<0 && comp==0) { /* neg residue and dn==Nmin */ + decApplyRound(dn, set, *residue, status); /* might force down */ + decSetSubnormal(dn, set, residue, status); + return; + } + } + + /* now apply any pending round (this could raise overflow). */ + if (*residue!=0) decApplyRound(dn, set, *residue, status); + + /* Check for overflow [redundant in the 'rare' case] or clamp */ + if (dn->exponent<=set->emax-set->digits+1) return; /* neither needed */ + + + /* here when might have an overflow or clamp to do */ + if (dn->exponent>set->emax-dn->digits+1) { /* too big */ + decSetOverflow(dn, set, status); + return; + } + /* here when the result is normal but in clamp range */ + if (!set->clamp) return; + + /* here when need to apply the IEEE exponent clamp (fold-down) */ + shift=dn->exponent-(set->emax-set->digits+1); + + /* shift coefficient (if non-zero) */ + if (!ISZERO(dn)) { + dn->digits=decShiftToMost(dn->lsu, dn->digits, shift); + } + dn->exponent-=shift; /* adjust the exponent to match */ + *status|=DEC_Clamped; /* and record the dirty deed */ + return; + } /* decFinalize */ + +/* ------------------------------------------------------------------ */ +/* decSetOverflow -- set number to proper overflow value */ +/* */ +/* dn is the number (used for sign [only] and result) */ +/* set is the context [used for the rounding mode, etc.] */ +/* status contains the current status to be updated */ +/* */ +/* This sets the sign of a number and sets its value to either */ +/* Infinity or the maximum finite value, depending on the sign of */ +/* dn and the rounding mode, following IEEE 854 rules. */ +/* ------------------------------------------------------------------ */ +static void decSetOverflow(decNumber *dn, decContext *set, uInt *status) { + Flag needmax=0; /* result is maximum finite value */ + uByte sign=dn->bits&DECNEG; /* clean and save sign bit */ + + if (ISZERO(dn)) { /* zero does not overflow magnitude */ + Int emax=set->emax; /* limit value */ + if (set->clamp) emax-=set->digits-1; /* lower if clamping */ + if (dn->exponent>emax) { /* clamp required */ + dn->exponent=emax; + *status|=DEC_Clamped; + } + return; + } + + decNumberZero(dn); + switch (set->round) { + case DEC_ROUND_DOWN: { + needmax=1; /* never Infinity */ + break;} /* r-d */ + case DEC_ROUND_05UP: { + needmax=1; /* never Infinity */ + break;} /* r-05 */ + case DEC_ROUND_CEILING: { + if (sign) needmax=1; /* Infinity if non-negative */ + break;} /* r-c */ + case DEC_ROUND_FLOOR: { + if (!sign) needmax=1; /* Infinity if negative */ + break;} /* r-f */ + default: break; /* Infinity in all other cases */ + } + if (needmax) { + decSetMaxValue(dn, set); + dn->bits=sign; /* set sign */ + } + else dn->bits=sign|DECINF; /* Value is +/-Infinity */ + *status|=DEC_Overflow | DEC_Inexact | DEC_Rounded; + } /* decSetOverflow */ + +/* ------------------------------------------------------------------ */ +/* decSetMaxValue -- set number to +Nmax (maximum normal value) */ +/* */ +/* dn is the number to set */ +/* set is the context [used for digits and emax] */ +/* */ +/* This sets the number to the maximum positive value. */ +/* ------------------------------------------------------------------ */ +static void decSetMaxValue(decNumber *dn, decContext *set) { + Unit *up; /* work */ + Int count=set->digits; /* nines to add */ + dn->digits=count; + /* fill in all nines to set maximum value */ + for (up=dn->lsu; ; up++) { + if (count>DECDPUN) *up=DECDPUNMAX; /* unit full o'nines */ + else { /* this is the msu */ + *up=(Unit)(powers[count]-1); + break; + } + count-=DECDPUN; /* filled those digits */ + } /* up */ + dn->bits=0; /* + sign */ + dn->exponent=set->emax-set->digits+1; + } /* decSetMaxValue */ + +/* ------------------------------------------------------------------ */ +/* decSetSubnormal -- process value whose exponent is <Emin */ +/* */ +/* dn is the number (used as input as well as output; it may have */ +/* an allowed subnormal value, which may need to be rounded) */ +/* set is the context [used for the rounding mode] */ +/* residue is any pending residue */ +/* status contains the current status to be updated */ +/* */ +/* If subset mode, set result to zero and set Underflow flags. */ +/* */ +/* Value may be zero with a low exponent; this does not set Subnormal */ +/* but the exponent will be clamped to Etiny. */ +/* */ +/* Otherwise ensure exponent is not out of range, and round as */ +/* necessary. Underflow is set if the result is Inexact. */ +/* ------------------------------------------------------------------ */ +static void decSetSubnormal(decNumber *dn, decContext *set, Int *residue, + uInt *status) { + Int dnexp; /* saves original exponent */ + decContext workset; /* work */ + Int etiny, adjust; /* .. */ + + #if DECSUBSET + /* simple set to zero and 'hard underflow' for subset */ + if (!set->extended) { + decNumberZero(dn); + /* always full overflow */ + *status|=DEC_Underflow | DEC_Subnormal | DEC_Inexact | DEC_Rounded; + return; + } + #endif + + /* Full arithmetic -- allow subnormals, rounded to minimum exponent */ + /* (Etiny) if needed */ + etiny=set->emin-(set->digits-1); /* smallest allowed exponent */ + + if ISZERO(dn) { /* value is zero */ + /* residue can never be non-zero here */ + #if DECCHECK + if (*residue!=0) { + printf("++ Subnormal 0 residue %ld\n", (LI)*residue); + *status|=DEC_Invalid_operation; + } + #endif + if (dn->exponent<etiny) { /* clamp required */ + dn->exponent=etiny; + *status|=DEC_Clamped; + } + return; + } + + *status|=DEC_Subnormal; /* have a non-zero subnormal */ + adjust=etiny-dn->exponent; /* calculate digits to remove */ + if (adjust<=0) { /* not out of range; unrounded */ + /* residue can never be non-zero here, except in the Nmin-residue */ + /* case (which is a subnormal result), so can take fast-path here */ + /* it may already be inexact (from setting the coefficient) */ + if (*status&DEC_Inexact) *status|=DEC_Underflow; + return; + } + + /* adjust>0, so need to rescale the result so exponent becomes Etiny */ + /* [this code is similar to that in rescale] */ + dnexp=dn->exponent; /* save exponent */ + workset=*set; /* clone rounding, etc. */ + workset.digits=dn->digits-adjust; /* set requested length */ + workset.emin-=adjust; /* and adjust emin to match */ + /* [note that the latter can be <1, here, similar to Rescale case] */ + decSetCoeff(dn, &workset, dn->lsu, dn->digits, residue, status); + decApplyRound(dn, &workset, *residue, status); + + /* Use 754R/854 default rule: Underflow is set iff Inexact */ + /* [independent of whether trapped] */ + if (*status&DEC_Inexact) *status|=DEC_Underflow; + + /* if rounded up a 999s case, exponent will be off by one; adjust */ + /* back if so [it will fit, because it was shortened earlier] */ + if (dn->exponent>etiny) { + dn->digits=decShiftToMost(dn->lsu, dn->digits, 1); + dn->exponent--; /* (re)adjust the exponent. */ + } + + /* if rounded to zero, it is by definition clamped... */ + if (ISZERO(dn)) *status|=DEC_Clamped; + } /* decSetSubnormal */ + +/* ------------------------------------------------------------------ */ +/* decCheckMath - check entry conditions for a math function */ +/* */ +/* This checks the context and the operand */ +/* */ +/* rhs is the operand to check */ +/* set is the context to check */ +/* status is unchanged if both are good */ +/* */ +/* returns non-zero if status is changed, 0 otherwise */ +/* */ +/* Restrictions enforced: */ +/* */ +/* digits, emax, and -emin in the context must be less than */ +/* DEC_MAX_MATH (999999), and A must be within these bounds if */ +/* non-zero. Invalid_operation is set in the status if a */ +/* restriction is violated. */ +/* ------------------------------------------------------------------ */ +static uInt decCheckMath(const decNumber *rhs, decContext *set, + uInt *status) { + uInt save=*status; /* record */ + if (set->digits>DEC_MAX_MATH + || set->emax>DEC_MAX_MATH + || -set->emin>DEC_MAX_MATH) *status|=DEC_Invalid_context; + else if ((rhs->digits>DEC_MAX_MATH + || rhs->exponent+rhs->digits>DEC_MAX_MATH+1 + || rhs->exponent+rhs->digits<2*(1-DEC_MAX_MATH)) + && !ISZERO(rhs)) *status|=DEC_Invalid_operation; + return (*status!=save); + } /* decCheckMath */ + +/* ------------------------------------------------------------------ */ +/* decGetInt -- get integer from a number */ +/* */ +/* dn is the number [which will not be altered] */ +/* */ +/* returns one of: */ +/* BADINT if there is a non-zero fraction */ +/* the converted integer */ +/* BIGEVEN if the integer is even and magnitude > 2*10**9 */ +/* BIGODD if the integer is odd and magnitude > 2*10**9 */ +/* */ +/* This checks and gets a whole number from the input decNumber. */ +/* The sign can be determined from dn by the caller when BIGEVEN or */ +/* BIGODD is returned. */ +/* ------------------------------------------------------------------ */ +static Int decGetInt(const decNumber *dn) { + Int theInt; /* result accumulator */ + const Unit *up; /* work */ + Int got; /* digits (real or not) processed */ + Int ilength=dn->digits+dn->exponent; /* integral length */ + Flag neg=decNumberIsNegative(dn); /* 1 if -ve */ + + /* The number must be an integer that fits in 10 digits */ + /* Assert, here, that 10 is enough for any rescale Etiny */ + #if DEC_MAX_EMAX > 999999999 + #error GetInt may need updating [for Emax] + #endif + #if DEC_MIN_EMIN < -999999999 + #error GetInt may need updating [for Emin] + #endif + if (ISZERO(dn)) return 0; /* zeros are OK, with any exponent */ + + up=dn->lsu; /* ready for lsu */ + theInt=0; /* ready to accumulate */ + if (dn->exponent>=0) { /* relatively easy */ + /* no fractional part [usual]; allow for positive exponent */ + got=dn->exponent; + } + else { /* -ve exponent; some fractional part to check and discard */ + Int count=-dn->exponent; /* digits to discard */ + /* spin up whole units until reach the Unit with the unit digit */ + for (; count>=DECDPUN; up++) { + if (*up!=0) return BADINT; /* non-zero Unit to discard */ + count-=DECDPUN; + } + if (count==0) got=0; /* [a multiple of DECDPUN] */ + else { /* [not multiple of DECDPUN] */ + Int rem; /* work */ + /* slice off fraction digits and check for non-zero */ + #if DECDPUN<=4 + theInt=QUOT10(*up, count); + rem=*up-theInt*powers[count]; + #else + rem=*up%powers[count]; /* slice off discards */ + theInt=*up/powers[count]; + #endif + if (rem!=0) return BADINT; /* non-zero fraction */ + /* it looks good */ + got=DECDPUN-count; /* number of digits so far */ + up++; /* ready for next */ + } + } + /* now it's known there's no fractional part */ + + /* tricky code now, to accumulate up to 9.3 digits */ + if (got==0) {theInt=*up; got+=DECDPUN; up++;} /* ensure lsu is there */ + + if (ilength<11) { + Int save=theInt; + /* collect any remaining unit(s) */ + for (; got<ilength; up++) { + theInt+=*up*powers[got]; + got+=DECDPUN; + } + if (ilength==10) { /* need to check for wrap */ + if (theInt/(Int)powers[got-DECDPUN]!=(Int)*(up-1)) ilength=11; + /* [that test also disallows the BADINT result case] */ + else if (neg && theInt>1999999997) ilength=11; + else if (!neg && theInt>999999999) ilength=11; + if (ilength==11) theInt=save; /* restore correct low bit */ + } + } + + if (ilength>10) { /* too big */ + if (theInt&1) return BIGODD; /* bottom bit 1 */ + return BIGEVEN; /* bottom bit 0 */ + } + + if (neg) theInt=-theInt; /* apply sign */ + return theInt; + } /* decGetInt */ + +/* ------------------------------------------------------------------ */ +/* decDecap -- decapitate the coefficient of a number */ +/* */ +/* dn is the number to be decapitated */ +/* drop is the number of digits to be removed from the left of dn; */ +/* this must be <= dn->digits (if equal, the coefficient is */ +/* set to 0) */ +/* */ +/* Returns dn; dn->digits will be <= the initial digits less drop */ +/* (after removing drop digits there may be leading zero digits */ +/* which will also be removed). Only dn->lsu and dn->digits change. */ +/* ------------------------------------------------------------------ */ +static decNumber *decDecap(decNumber *dn, Int drop) { + Unit *msu; /* -> target cut point */ + Int cut; /* work */ + if (drop>=dn->digits) { /* losing the whole thing */ + #if DECCHECK + if (drop>dn->digits) + printf("decDecap called with drop>digits [%ld>%ld]\n", + (LI)drop, (LI)dn->digits); + #endif + dn->lsu[0]=0; + dn->digits=1; + return dn; + } + msu=dn->lsu+D2U(dn->digits-drop)-1; /* -> likely msu */ + cut=MSUDIGITS(dn->digits-drop); /* digits to be in use in msu */ + if (cut!=DECDPUN) *msu%=powers[cut]; /* clear left digits */ + /* that may have left leading zero digits, so do a proper count... */ + dn->digits=decGetDigits(dn->lsu, msu-dn->lsu+1); + return dn; + } /* decDecap */ + +/* ------------------------------------------------------------------ */ +/* decBiStr -- compare string with pairwise options */ +/* */ +/* targ is the string to compare */ +/* str1 is one of the strings to compare against (length may be 0) */ +/* str2 is the other; it must be the same length as str1 */ +/* */ +/* returns 1 if strings compare equal, (that is, it is the same */ +/* length as str1 and str2, and each character of targ is in either */ +/* str1 or str2 in the corresponding position), or 0 otherwise */ +/* */ +/* This is used for generic caseless compare, including the awkward */ +/* case of the Turkish dotted and dotless Is. Use as (for example): */ +/* if (decBiStr(test, "mike", "MIKE")) ... */ +/* ------------------------------------------------------------------ */ +static Flag decBiStr(const char *targ, const char *str1, const char *str2) { + for (;;targ++, str1++, str2++) { + if (*targ!=*str1 && *targ!=*str2) return 0; + /* *targ has a match in one (or both, if terminator) */ + if (*targ=='\0') break; + } /* forever */ + return 1; + } /* decBiStr */ + +/* ------------------------------------------------------------------ */ +/* decNaNs -- handle NaN operand or operands */ +/* */ +/* res is the result number */ +/* lhs is the first operand */ +/* rhs is the second operand, or NULL if none */ +/* context is used to limit payload length */ +/* status contains the current status */ +/* returns res in case convenient */ +/* */ +/* Called when one or both operands is a NaN, and propagates the */ +/* appropriate result to res. When an sNaN is found, it is changed */ +/* to a qNaN and Invalid operation is set. */ +/* ------------------------------------------------------------------ */ +static decNumber * decNaNs(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set, + uInt *status) { + /* This decision tree ends up with LHS being the source pointer, */ + /* and status updated if need be */ + if (lhs->bits & DECSNAN) + *status|=DEC_Invalid_operation | DEC_sNaN; + else if (rhs==NULL); + else if (rhs->bits & DECSNAN) { + lhs=rhs; + *status|=DEC_Invalid_operation | DEC_sNaN; + } + else if (lhs->bits & DECNAN); + else lhs=rhs; + + /* propagate the payload */ + if (lhs->digits<=set->digits) decNumberCopy(res, lhs); /* easy */ + else { /* too long */ + const Unit *ul; + Unit *ur, *uresp1; + /* copy safe number of units, then decapitate */ + res->bits=lhs->bits; /* need sign etc. */ + uresp1=res->lsu+D2U(set->digits); + for (ur=res->lsu, ul=lhs->lsu; ur<uresp1; ur++, ul++) *ur=*ul; + res->digits=D2U(set->digits)*DECDPUN; + /* maybe still too long */ + if (res->digits>set->digits) decDecap(res, res->digits-set->digits); + } + + res->bits&=~DECSNAN; /* convert any sNaN to NaN, while */ + res->bits|=DECNAN; /* .. preserving sign */ + res->exponent=0; /* clean exponent */ + /* [coefficient was copied/decapitated] */ + return res; + } /* decNaNs */ + +/* ------------------------------------------------------------------ */ +/* decStatus -- apply non-zero status */ +/* */ +/* dn is the number to set if error */ +/* status contains the current status (not yet in context) */ +/* set is the context */ +/* */ +/* If the status is an error status, the number is set to a NaN, */ +/* unless the error was an overflow, divide-by-zero, or underflow, */ +/* in which case the number will have already been set. */ +/* */ +/* The context status is then updated with the new status. Note that */ +/* this may raise a signal, so control may never return from this */ +/* routine (hence resources must be recovered before it is called). */ +/* ------------------------------------------------------------------ */ +static void decStatus(decNumber *dn, uInt status, decContext *set) { + if (status & DEC_NaNs) { /* error status -> NaN */ + /* if cause was an sNaN, clear and propagate [NaN is already set up] */ + if (status & DEC_sNaN) status&=~DEC_sNaN; + else { + decNumberZero(dn); /* other error: clean throughout */ + dn->bits=DECNAN; /* and make a quiet NaN */ + } + } + decContextSetStatus(set, status); /* [may not return] */ + return; + } /* decStatus */ + +/* ------------------------------------------------------------------ */ +/* decGetDigits -- count digits in a Units array */ +/* */ +/* uar is the Unit array holding the number (this is often an */ +/* accumulator of some sort) */ +/* len is the length of the array in units [>=1] */ +/* */ +/* returns the number of (significant) digits in the array */ +/* */ +/* All leading zeros are excluded, except the last if the array has */ +/* only zero Units. */ +/* ------------------------------------------------------------------ */ +/* This may be called twice during some operations. */ +static Int decGetDigits(Unit *uar, Int len) { + Unit *up=uar+(len-1); /* -> msu */ + Int digits=(len-1)*DECDPUN+1; /* possible digits excluding msu */ + #if DECDPUN>4 + uInt const *pow; /* work */ + #endif + /* (at least 1 in final msu) */ + #if DECCHECK + if (len<1) printf("decGetDigits called with len<1 [%ld]\n", (LI)len); + #endif + + for (; up>=uar; up--) { + if (*up==0) { /* unit is all 0s */ + if (digits==1) break; /* a zero has one digit */ + digits-=DECDPUN; /* adjust for 0 unit */ + continue;} + /* found the first (most significant) non-zero Unit */ + #if DECDPUN>1 /* not done yet */ + if (*up<10) break; /* is 1-9 */ + digits++; + #if DECDPUN>2 /* not done yet */ + if (*up<100) break; /* is 10-99 */ + digits++; + #if DECDPUN>3 /* not done yet */ + if (*up<1000) break; /* is 100-999 */ + digits++; + #if DECDPUN>4 /* count the rest ... */ + for (pow=&powers[4]; *up>=*pow; pow++) digits++; + #endif + #endif + #endif + #endif + break; + } /* up */ + return digits; + } /* decGetDigits */ + +#if DECTRACE | DECCHECK +/* ------------------------------------------------------------------ */ +/* decNumberShow -- display a number [debug aid] */ +/* dn is the number to show */ +/* */ +/* Shows: sign, exponent, coefficient (msu first), digits */ +/* or: sign, special-value */ +/* ------------------------------------------------------------------ */ +/* this is public so other modules can use it */ +void decNumberShow(const decNumber *dn) { + const Unit *up; /* work */ + uInt u, d; /* .. */ + Int cut; /* .. */ + char isign='+'; /* main sign */ + if (dn==NULL) { + printf("NULL\n"); + return;} + if (decNumberIsNegative(dn)) isign='-'; + printf(" >> %c ", isign); + if (dn->bits&DECSPECIAL) { /* Is a special value */ + if (decNumberIsInfinite(dn)) printf("Infinity"); + else { /* a NaN */ + if (dn->bits&DECSNAN) printf("sNaN"); /* signalling NaN */ + else printf("NaN"); + } + /* if coefficient and exponent are 0, no more to do */ + if (dn->exponent==0 && dn->digits==1 && *dn->lsu==0) { + printf("\n"); + return;} + /* drop through to report other information */ + printf(" "); + } + + /* now carefully display the coefficient */ + up=dn->lsu+D2U(dn->digits)-1; /* msu */ + printf("%ld", (LI)*up); + for (up=up-1; up>=dn->lsu; up--) { + u=*up; + printf(":"); + for (cut=DECDPUN-1; cut>=0; cut--) { + d=u/powers[cut]; + u-=d*powers[cut]; + printf("%ld", (LI)d); + } /* cut */ + } /* up */ + if (dn->exponent!=0) { + char esign='+'; + if (dn->exponent<0) esign='-'; + printf(" E%c%ld", esign, (LI)abs(dn->exponent)); + } + printf(" [%ld]\n", (LI)dn->digits); + } /* decNumberShow */ +#endif + +#if DECTRACE || DECCHECK +/* ------------------------------------------------------------------ */ +/* decDumpAr -- display a unit array [debug/check aid] */ +/* name is a single-character tag name */ +/* ar is the array to display */ +/* len is the length of the array in Units */ +/* ------------------------------------------------------------------ */ +static void decDumpAr(char name, const Unit *ar, Int len) { + Int i; + const char *spec; + #if DECDPUN==9 + spec="%09d "; + #elif DECDPUN==8 + spec="%08d "; + #elif DECDPUN==7 + spec="%07d "; + #elif DECDPUN==6 + spec="%06d "; + #elif DECDPUN==5 + spec="%05d "; + #elif DECDPUN==4 + spec="%04d "; + #elif DECDPUN==3 + spec="%03d "; + #elif DECDPUN==2 + spec="%02d "; + #else + spec="%d "; + #endif + printf(" :%c: ", name); + for (i=len-1; i>=0; i--) { + if (i==len-1) printf("%ld ", (LI)ar[i]); + else printf(spec, ar[i]); + } + printf("\n"); + return;} +#endif + +#if DECCHECK +/* ------------------------------------------------------------------ */ +/* decCheckOperands -- check operand(s) to a routine */ +/* res is the result structure (not checked; it will be set to */ +/* quiet NaN if error found (and it is not NULL)) */ +/* lhs is the first operand (may be DECUNRESU) */ +/* rhs is the second (may be DECUNUSED) */ +/* set is the context (may be DECUNCONT) */ +/* returns 0 if both operands, and the context are clean, or 1 */ +/* otherwise (in which case the context will show an error, */ +/* unless NULL). Note that res is not cleaned; caller should */ +/* handle this so res=NULL case is safe. */ +/* The caller is expected to abandon immediately if 1 is returned. */ +/* ------------------------------------------------------------------ */ +static Flag decCheckOperands(decNumber *res, const decNumber *lhs, + const decNumber *rhs, decContext *set) { + Flag bad=0; + if (set==NULL) { /* oops; hopeless */ + #if DECTRACE || DECVERB + printf("Reference to context is NULL.\n"); + #endif + bad=1; + return 1;} + else if (set!=DECUNCONT + && (set->digits<1 || set->round>=DEC_ROUND_MAX)) { + bad=1; + #if DECTRACE || DECVERB + printf("Bad context [digits=%ld round=%ld].\n", + (LI)set->digits, (LI)set->round); + #endif + } + else { + if (res==NULL) { + bad=1; + #if DECTRACE + /* this one not DECVERB as standard tests include NULL */ + printf("Reference to result is NULL.\n"); + #endif + } + if (!bad && lhs!=DECUNUSED) bad=(decCheckNumber(lhs)); + if (!bad && rhs!=DECUNUSED) bad=(decCheckNumber(rhs)); + } + if (bad) { + if (set!=DECUNCONT) decContextSetStatus(set, DEC_Invalid_operation); + if (res!=DECUNRESU && res!=NULL) { + decNumberZero(res); + res->bits=DECNAN; /* qNaN */ + } + } + return bad; + } /* decCheckOperands */ + +/* ------------------------------------------------------------------ */ +/* decCheckNumber -- check a number */ +/* dn is the number to check */ +/* returns 0 if the number is clean, or 1 otherwise */ +/* */ +/* The number is considered valid if it could be a result from some */ +/* operation in some valid context. */ +/* ------------------------------------------------------------------ */ +static Flag decCheckNumber(const decNumber *dn) { + const Unit *up; /* work */ + uInt maxuint; /* .. */ + Int ae, d, digits; /* .. */ + Int emin, emax; /* .. */ + + if (dn==NULL) { /* hopeless */ + #if DECTRACE + /* this one not DECVERB as standard tests include NULL */ + printf("Reference to decNumber is NULL.\n"); + #endif + return 1;} + + /* check special values */ + if (dn->bits & DECSPECIAL) { + if (dn->exponent!=0) { + #if DECTRACE || DECVERB + printf("Exponent %ld (not 0) for a special value [%02x].\n", + (LI)dn->exponent, dn->bits); + #endif + return 1;} + + /* 2003.09.08: NaNs may now have coefficients, so next tests Inf only */ + if (decNumberIsInfinite(dn)) { + if (dn->digits!=1) { + #if DECTRACE || DECVERB + printf("Digits %ld (not 1) for an infinity.\n", (LI)dn->digits); + #endif + return 1;} + if (*dn->lsu!=0) { + #if DECTRACE || DECVERB + printf("LSU %ld (not 0) for an infinity.\n", (LI)*dn->lsu); + #endif + decDumpAr('I', dn->lsu, D2U(dn->digits)); + return 1;} + } /* Inf */ + /* 2002.12.26: negative NaNs can now appear through proposed IEEE */ + /* concrete formats (decimal64, etc.). */ + return 0; + } + + /* check the coefficient */ + if (dn->digits<1 || dn->digits>DECNUMMAXP) { + #if DECTRACE || DECVERB + printf("Digits %ld in number.\n", (LI)dn->digits); + #endif + return 1;} + + d=dn->digits; + + for (up=dn->lsu; d>0; up++) { + if (d>DECDPUN) maxuint=DECDPUNMAX; + else { /* reached the msu */ + maxuint=powers[d]-1; + if (dn->digits>1 && *up<powers[d-1]) { + #if DECTRACE || DECVERB + printf("Leading 0 in number.\n"); + decNumberShow(dn); + #endif + return 1;} + } + if (*up>maxuint) { + #if DECTRACE || DECVERB + printf("Bad Unit [%08lx] in %ld-digit number at offset %ld [maxuint %ld].\n", + (LI)*up, (LI)dn->digits, (LI)(up-dn->lsu), (LI)maxuint); + #endif + return 1;} + d-=DECDPUN; + } + + /* check the exponent. Note that input operands can have exponents */ + /* which are out of the set->emin/set->emax and set->digits range */ + /* (just as they can have more digits than set->digits). */ + ae=dn->exponent+dn->digits-1; /* adjusted exponent */ + emax=DECNUMMAXE; + emin=DECNUMMINE; + digits=DECNUMMAXP; + if (ae<emin-(digits-1)) { + #if DECTRACE || DECVERB + printf("Adjusted exponent underflow [%ld].\n", (LI)ae); + decNumberShow(dn); + #endif + return 1;} + if (ae>+emax) { + #if DECTRACE || DECVERB + printf("Adjusted exponent overflow [%ld].\n", (LI)ae); + decNumberShow(dn); + #endif + return 1;} + + return 0; /* it's OK */ + } /* decCheckNumber */ + +/* ------------------------------------------------------------------ */ +/* decCheckInexact -- check a normal finite inexact result has digits */ +/* dn is the number to check */ +/* set is the context (for status and precision) */ +/* sets Invalid operation, etc., if some digits are missing */ +/* [this check is not made for DECSUBSET compilation or when */ +/* subnormal is not set] */ +/* ------------------------------------------------------------------ */ +static void decCheckInexact(const decNumber *dn, decContext *set) { + #if !DECSUBSET && DECEXTFLAG + if ((set->status & (DEC_Inexact|DEC_Subnormal))==DEC_Inexact + && (set->digits!=dn->digits) && !(dn->bits & DECSPECIAL)) { + #if DECTRACE || DECVERB + printf("Insufficient digits [%ld] on normal Inexact result.\n", + (LI)dn->digits); + decNumberShow(dn); + #endif + decContextSetStatus(set, DEC_Invalid_operation); + } + #else + /* next is a noop for quiet compiler */ + if (dn!=NULL && dn->digits==0) set->status|=DEC_Invalid_operation; + #endif + return; + } /* decCheckInexact */ +#endif + +#if DECALLOC +#undef malloc +#undef free +/* ------------------------------------------------------------------ */ +/* decMalloc -- accountable allocation routine */ +/* n is the number of bytes to allocate */ +/* */ +/* Semantics is the same as the stdlib malloc routine, but bytes */ +/* allocated are accounted for globally, and corruption fences are */ +/* added before and after the 'actual' storage. */ +/* ------------------------------------------------------------------ */ +/* This routine allocates storage with an extra twelve bytes; 8 are */ +/* at the start and hold: */ +/* 0-3 the original length requested */ +/* 4-7 buffer corruption detection fence (DECFENCE, x4) */ +/* The 4 bytes at the end also hold a corruption fence (DECFENCE, x4) */ +/* ------------------------------------------------------------------ */ +static void *decMalloc(size_t n) { + uInt size=n+12; /* true size */ + void *alloc; /* -> allocated storage */ + uInt *j; /* work */ + uByte *b, *b0; /* .. */ + + alloc=malloc(size); /* -> allocated storage */ + if (alloc==NULL) return NULL; /* out of strorage */ + b0=(uByte *)alloc; /* as bytes */ + decAllocBytes+=n; /* account for storage */ + j=(uInt *)alloc; /* -> first four bytes */ + *j=n; /* save n */ + /* printf(" alloc ++ dAB: %ld (%d)\n", decAllocBytes, n); */ + for (b=b0+4; b<b0+8; b++) *b=DECFENCE; + for (b=b0+n+8; b<b0+n+12; b++) *b=DECFENCE; + return b0+8; /* -> play area */ + } /* decMalloc */ + +/* ------------------------------------------------------------------ */ +/* decFree -- accountable free routine */ +/* alloc is the storage to free */ +/* */ +/* Semantics is the same as the stdlib malloc routine, except that */ +/* the global storage accounting is updated and the fences are */ +/* checked to ensure that no routine has written 'out of bounds'. */ +/* ------------------------------------------------------------------ */ +/* This routine first checks that the fences have not been corrupted. */ +/* It then frees the storage using the 'truw' storage address (that */ +/* is, offset by 8). */ +/* ------------------------------------------------------------------ */ +static void decFree(void *alloc) { + uInt *j, n; /* pointer, original length */ + uByte *b, *b0; /* work */ + + if (alloc==NULL) return; /* allowed; it's a nop */ + b0=(uByte *)alloc; /* as bytes */ + b0-=8; /* -> true start of storage */ + j=(uInt *)b0; /* -> first four bytes */ + n=*j; /* lift */ + for (b=b0+4; b<b0+8; b++) if (*b!=DECFENCE) + printf("=== Corrupt byte [%02x] at offset %d from %ld ===\n", *b, + b-b0-8, (Int)b0); + for (b=b0+n+8; b<b0+n+12; b++) if (*b!=DECFENCE) + printf("=== Corrupt byte [%02x] at offset +%d from %ld, n=%ld ===\n", *b, + b-b0-8, (Int)b0, n); + free(b0); /* drop the storage */ + decAllocBytes-=n; /* account for storage */ + /* printf(" free -- dAB: %d (%d)\n", decAllocBytes, -n); */ + } /* decFree */ +#define malloc(a) decMalloc(a) +#define free(a) decFree(a) +#endif diff --git a/libdecnumber/decNumber.h b/libdecnumber/decNumber.h new file mode 100644 index 0000000..0a9fdce --- /dev/null +++ b/libdecnumber/decNumber.h @@ -0,0 +1,200 @@ +/* Decimal number arithmetic module header for the decNumber C Library. + Copyright (C) 2005, 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* Decimal Number arithmetic module header */ +/* ------------------------------------------------------------------ */ + +#if !defined(DECNUMBER) + #define DECNUMBER + #define DECNAME "decNumber" /* Short name */ + #define DECFULLNAME "Decimal Number Module" /* Verbose name */ + #define DECAUTHOR "Mike Cowlishaw" /* Who to blame */ + + #if !defined(DECCONTEXT) + #include "decContext.h" + #endif + + /* Bit settings for decNumber.bits */ + #define DECNEG 0x80 /* Sign; 1=negative, 0=positive or zero */ + #define DECINF 0x40 /* 1=Infinity */ + #define DECNAN 0x20 /* 1=NaN */ + #define DECSNAN 0x10 /* 1=sNaN */ + /* The remaining bits are reserved; they must be 0 */ + #define DECSPECIAL (DECINF|DECNAN|DECSNAN) /* any special value */ + + /* Define the decNumber data structure. The size and shape of the */ + /* units array in the structure is determined by the following */ + /* constant. This must not be changed without recompiling the */ + /* decNumber library modules. */ + + #define DECDPUN 3 /* DECimal Digits Per UNit [must be >0 */ + /* and <10; 3 or powers of 2 are best]. */ + + /* DECNUMDIGITS is the default number of digits that can be held in */ + /* the structure. If undefined, 1 is assumed and it is assumed */ + /* that the structure will be immediately followed by extra space, */ + /* as required. DECNUMDIGITS is always >0. */ + #if !defined(DECNUMDIGITS) + #define DECNUMDIGITS 1 + #endif + + /* The size (integer data type) of each unit is determined by the */ + /* number of digits it will hold. */ + #if DECDPUN<=2 + #define decNumberUnit uint8_t + #elif DECDPUN<=4 + #define decNumberUnit uint16_t + #else + #define decNumberUnit uint32_t + #endif + /* The number of units needed is ceil(DECNUMDIGITS/DECDPUN) */ + #define DECNUMUNITS ((DECNUMDIGITS+DECDPUN-1)/DECDPUN) + + /* The data structure... */ + typedef struct { + int32_t digits; /* Count of digits in the coefficient; >0 */ + int32_t exponent; /* Unadjusted exponent, unbiased, in */ + /* range: -1999999997 through 999999999 */ + uint8_t bits; /* Indicator bits (see above) */ + /* Coefficient, from least significant unit */ + decNumberUnit lsu[DECNUMUNITS]; + } decNumber; + + /* Notes: */ + /* 1. If digits is > DECDPUN then there will one or more */ + /* decNumberUnits immediately following the first element of lsu.*/ + /* These contain the remaining (more significant) digits of the */ + /* number, and may be in the lsu array, or may be guaranteed by */ + /* some other mechanism (such as being contained in another */ + /* structure, or being overlaid on dynamically allocated */ + /* storage). */ + /* */ + /* Each integer of the coefficient (except potentially the last) */ + /* contains DECDPUN digits (e.g., a value in the range 0 through */ + /* 99999999 if DECDPUN is 8, or 0 through 999 if DECDPUN is 3). */ + /* */ + /* 2. A decNumber converted to a string may need up to digits+14 */ + /* characters. The worst cases (non-exponential and exponential */ + /* formats) are -0.00000{9...}# and -9.{9...}E+999999999# */ + /* (where # is '\0') */ + + + /* ---------------------------------------------------------------- */ + /* decNumber public functions and macros */ + /* ---------------------------------------------------------------- */ + + #include "decNumberSymbols.h" + + /* Conversions */ + decNumber * decNumberFromInt32(decNumber *, int32_t); + decNumber * decNumberFromUInt32(decNumber *, uint32_t); + decNumber * decNumberFromString(decNumber *, const char *, decContext *); + char * decNumberToString(const decNumber *, char *); + char * decNumberToEngString(const decNumber *, char *); + uint32_t decNumberToUInt32(const decNumber *, decContext *); + int32_t decNumberToInt32(const decNumber *, decContext *); + uint8_t * decNumberGetBCD(const decNumber *, uint8_t *); + decNumber * decNumberSetBCD(decNumber *, const uint8_t *, uint32_t); + + /* Operators and elementary functions */ + decNumber * decNumberAbs(decNumber *, const decNumber *, decContext *); + decNumber * decNumberAdd(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberAnd(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberCompare(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberCompareSignal(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberCompareTotal(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberCompareTotalMag(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberDivide(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberDivideInteger(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberExp(decNumber *, const decNumber *, decContext *); + decNumber * decNumberFMA(decNumber *, const decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberInvert(decNumber *, const decNumber *, decContext *); + decNumber * decNumberLn(decNumber *, const decNumber *, decContext *); + decNumber * decNumberLogB(decNumber *, const decNumber *, decContext *); + decNumber * decNumberLog10(decNumber *, const decNumber *, decContext *); + decNumber * decNumberMax(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberMaxMag(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberMin(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberMinMag(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberMinus(decNumber *, const decNumber *, decContext *); + decNumber * decNumberMultiply(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberNormalize(decNumber *, const decNumber *, decContext *); + decNumber * decNumberOr(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberPlus(decNumber *, const decNumber *, decContext *); + decNumber * decNumberPower(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberQuantize(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberReduce(decNumber *, const decNumber *, decContext *); + decNumber * decNumberRemainder(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberRemainderNear(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberRescale(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberRotate(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberSameQuantum(decNumber *, const decNumber *, const decNumber *); + decNumber * decNumberScaleB(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberShift(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberSquareRoot(decNumber *, const decNumber *, decContext *); + decNumber * decNumberSubtract(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberToIntegralExact(decNumber *, const decNumber *, decContext *); + decNumber * decNumberToIntegralValue(decNumber *, const decNumber *, decContext *); + decNumber * decNumberXor(decNumber *, const decNumber *, const decNumber *, decContext *); + + /* Utilities */ + enum decClass decNumberClass(const decNumber *, decContext *); + const char * decNumberClassToString(enum decClass); + decNumber * decNumberCopy(decNumber *, const decNumber *); + decNumber * decNumberCopyAbs(decNumber *, const decNumber *); + decNumber * decNumberCopyNegate(decNumber *, const decNumber *); + decNumber * decNumberCopySign(decNumber *, const decNumber *, const decNumber *); + decNumber * decNumberNextMinus(decNumber *, const decNumber *, decContext *); + decNumber * decNumberNextPlus(decNumber *, const decNumber *, decContext *); + decNumber * decNumberNextToward(decNumber *, const decNumber *, const decNumber *, decContext *); + decNumber * decNumberTrim(decNumber *); + const char * decNumberVersion(void); + decNumber * decNumberZero(decNumber *); + + /* Functions for testing decNumbers (normality depends on context) */ + int32_t decNumberIsNormal(const decNumber *, decContext *); + int32_t decNumberIsSubnormal(const decNumber *, decContext *); + + /* Macros for testing decNumber *dn */ + #define decNumberIsCanonical(dn) (1) /* All decNumbers are saintly */ + #define decNumberIsFinite(dn) (((dn)->bits&DECSPECIAL)==0) + #define decNumberIsInfinite(dn) (((dn)->bits&DECINF)!=0) + #define decNumberIsNaN(dn) (((dn)->bits&(DECNAN|DECSNAN))!=0) + #define decNumberIsNegative(dn) (((dn)->bits&DECNEG)!=0) + #define decNumberIsQNaN(dn) (((dn)->bits&(DECNAN))!=0) + #define decNumberIsSNaN(dn) (((dn)->bits&(DECSNAN))!=0) + #define decNumberIsSpecial(dn) (((dn)->bits&DECSPECIAL)!=0) + #define decNumberIsZero(dn) (*(dn)->lsu==0 \ + && (dn)->digits==1 \ + && (((dn)->bits&DECSPECIAL)==0)) + #define decNumberRadix(dn) (10) + +#endif diff --git a/libdecnumber/decNumberLocal.h b/libdecnumber/decNumberLocal.h new file mode 100644 index 0000000..891a084 --- /dev/null +++ b/libdecnumber/decNumberLocal.h @@ -0,0 +1,665 @@ +/* Local definitions for the decNumber C Library. + Copyright (C) 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* decNumber package local type, tuning, and macro definitions */ +/* ------------------------------------------------------------------ */ +/* This header file is included by all modules in the decNumber */ +/* library, and contains local type definitions, tuning parameters, */ +/* etc. It should not need to be used by application programs. */ +/* decNumber.h or one of decDouble (etc.) must be included first. */ +/* ------------------------------------------------------------------ */ + +#if !defined(DECNUMBERLOC) + #define DECNUMBERLOC + #define DECVERSION "decNumber 3.53" /* Package Version [16 max.] */ + #define DECNLAUTHOR "Mike Cowlishaw" /* Who to blame */ + + #include <stdlib.h> /* for abs */ + #include <string.h> /* for memset, strcpy */ + #include "config.h" /* for WORDS_BIGENDIAN */ + + /* Conditional code flag -- set this to match hardware platform */ + /* 1=little-endian, 0=big-endian */ + #if WORDS_BIGENDIAN + #define DECLITEND 0 + #else + #define DECLITEND 1 + #endif + + /* Conditional code flag -- set this to 1 for best performance */ + #define DECUSE64 1 /* 1=use int64s, 0=int32 & smaller only */ + + /* Conditional check flags -- set these to 0 for best performance */ + #define DECCHECK 0 /* 1 to enable robust checking */ + #define DECALLOC 0 /* 1 to enable memory accounting */ + #define DECTRACE 0 /* 1 to trace certain internals, etc. */ + + /* Tuning parameter for decNumber (arbitrary precision) module */ + #define DECBUFFER 36 /* Size basis for local buffers. This */ + /* should be a common maximum precision */ + /* rounded up to a multiple of 4; must */ + /* be zero or positive. */ + + /* ---------------------------------------------------------------- */ + /* Definitions for all modules (general-purpose) */ + /* ---------------------------------------------------------------- */ + + /* Local names for common types -- for safety, decNumber modules do */ + /* not use int or long directly. */ + #define Flag uint8_t + #define Byte int8_t + #define uByte uint8_t + #define Short int16_t + #define uShort uint16_t + #define Int int32_t + #define uInt uint32_t + #define Unit decNumberUnit + #if DECUSE64 + #define Long int64_t + #define uLong uint64_t + #endif + + /* Development-use definitions */ + typedef long int LI; /* for printf arguments only */ + #define DECNOINT 0 /* 1 to check no internal use of 'int' */ + #if DECNOINT + /* if these interfere with your C includes, do not set DECNOINT */ + #define int ? /* enable to ensure that plain C 'int' */ + #define long ?? /* .. or 'long' types are not used */ + #endif + + /* Shared lookup tables */ + extern const uByte DECSTICKYTAB[10]; /* re-round digits if sticky */ + extern const uInt DECPOWERS[10]; /* powers of ten table */ + /* The following are included from decDPD.h */ + extern const uShort DPD2BIN[1024]; /* DPD -> 0-999 */ + extern const uShort BIN2DPD[1000]; /* 0-999 -> DPD */ + extern const uInt DPD2BINK[1024]; /* DPD -> 0-999000 */ + extern const uInt DPD2BINM[1024]; /* DPD -> 0-999000000 */ + extern const uByte DPD2BCD8[4096]; /* DPD -> ddd + len */ + extern const uByte BIN2BCD8[4000]; /* 0-999 -> ddd + len */ + extern const uShort BCD2DPD[2458]; /* 0-0x999 -> DPD (0x999=2457)*/ + + /* LONGMUL32HI -- set w=(u*v)>>32, where w, u, and v are uInts */ + /* (that is, sets w to be the high-order word of the 64-bit result; */ + /* the low-order word is simply u*v.) */ + /* This version is derived from Knuth via Hacker's Delight; */ + /* it seems to optimize better than some others tried */ + #define LONGMUL32HI(w, u, v) { \ + uInt u0, u1, v0, v1, w0, w1, w2, t; \ + u0=u & 0xffff; u1=u>>16; \ + v0=v & 0xffff; v1=v>>16; \ + w0=u0*v0; \ + t=u1*v0 + (w0>>16); \ + w1=t & 0xffff; w2=t>>16; \ + w1=u0*v1 + w1; \ + (w)=u1*v1 + w2 + (w1>>16);} + + /* ROUNDUP -- round an integer up to a multiple of n */ + #define ROUNDUP(i, n) ((((i)+(n)-1)/n)*n) + + /* ROUNDDOWN -- round an integer down to a multiple of n */ + #define ROUNDDOWN(i, n) (((i)/n)*n) + #define ROUNDDOWN4(i) ((i)&~3) /* special for n=4 */ + + /* References to multi-byte sequences under different sizes */ + /* Refer to a uInt from four bytes starting at a char* or uByte*, */ + /* etc. */ + #define UINTAT(b) (*((uInt *)(b))) + #define USHORTAT(b) (*((uShort *)(b))) + #define UBYTEAT(b) (*((uByte *)(b))) + + /* X10 and X100 -- multiply integer i by 10 or 100 */ + /* [shifts are usually faster than multiply; could be conditional] */ + #define X10(i) (((i)<<1)+((i)<<3)) + #define X100(i) (((i)<<2)+((i)<<5)+((i)<<6)) + + /* MAXI and MINI -- general max & min (not in ANSI) for integers */ + #define MAXI(x,y) ((x)<(y)?(y):(x)) + #define MINI(x,y) ((x)>(y)?(y):(x)) + + /* Useful constants */ + #define BILLION 1000000000 /* 10**9 */ + /* CHARMASK: 0x30303030 for ASCII/UTF8; 0xF0F0F0F0 for EBCDIC */ + #define CHARMASK ((((((((uInt)'0')<<8)+'0')<<8)+'0')<<8)+'0') + + + /* ---------------------------------------------------------------- */ + /* Definitions for arbitary-precision modules (only valid after */ + /* decNumber.h has been included) */ + /* ---------------------------------------------------------------- */ + + /* Limits and constants */ + #define DECNUMMAXP 999999999 /* maximum precision code can handle */ + #define DECNUMMAXE 999999999 /* maximum adjusted exponent ditto */ + #define DECNUMMINE -999999999 /* minimum adjusted exponent ditto */ + #if (DECNUMMAXP != DEC_MAX_DIGITS) + #error Maximum digits mismatch + #endif + #if (DECNUMMAXE != DEC_MAX_EMAX) + #error Maximum exponent mismatch + #endif + #if (DECNUMMINE != DEC_MIN_EMIN) + #error Minimum exponent mismatch + #endif + + /* Set DECDPUNMAX -- the maximum integer that fits in DECDPUN */ + /* digits, and D2UTABLE -- the initializer for the D2U table */ + #if DECDPUN==1 + #define DECDPUNMAX 9 + #define D2UTABLE {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17, \ + 18,19,20,21,22,23,24,25,26,27,28,29,30,31,32, \ + 33,34,35,36,37,38,39,40,41,42,43,44,45,46,47, \ + 48,49} + #elif DECDPUN==2 + #define DECDPUNMAX 99 + #define D2UTABLE {0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10, \ + 11,11,12,12,13,13,14,14,15,15,16,16,17,17,18, \ + 18,19,19,20,20,21,21,22,22,23,23,24,24,25} + #elif DECDPUN==3 + #define DECDPUNMAX 999 + #define D2UTABLE {0,1,1,1,2,2,2,3,3,3,4,4,4,5,5,5,6,6,6,7,7,7, \ + 8,8,8,9,9,9,10,10,10,11,11,11,12,12,12,13,13, \ + 13,14,14,14,15,15,15,16,16,16,17} + #elif DECDPUN==4 + #define DECDPUNMAX 9999 + #define D2UTABLE {0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,6, \ + 6,6,6,7,7,7,7,8,8,8,8,9,9,9,9,10,10,10,10,11, \ + 11,11,11,12,12,12,12,13} + #elif DECDPUN==5 + #define DECDPUNMAX 99999 + #define D2UTABLE {0,1,1,1,1,1,2,2,2,2,2,3,3,3,3,3,4,4,4,4,4,5, \ + 5,5,5,5,6,6,6,6,6,7,7,7,7,7,8,8,8,8,8,9,9,9, \ + 9,9,10,10,10,10} + #elif DECDPUN==6 + #define DECDPUNMAX 999999 + #define D2UTABLE {0,1,1,1,1,1,1,2,2,2,2,2,2,3,3,3,3,3,3,4,4,4, \ + 4,4,4,5,5,5,5,5,5,6,6,6,6,6,6,7,7,7,7,7,7,8, \ + 8,8,8,8,8,9} + #elif DECDPUN==7 + #define DECDPUNMAX 9999999 + #define D2UTABLE {0,1,1,1,1,1,1,1,2,2,2,2,2,2,2,3,3,3,3,3,3,3, \ + 4,4,4,4,4,4,4,5,5,5,5,5,5,5,6,6,6,6,6,6,6,7, \ + 7,7,7,7,7,7} + #elif DECDPUN==8 + #define DECDPUNMAX 99999999 + #define D2UTABLE {0,1,1,1,1,1,1,1,1,2,2,2,2,2,2,2,2,3,3,3,3,3, \ + 3,3,3,4,4,4,4,4,4,4,4,5,5,5,5,5,5,5,5,6,6,6, \ + 6,6,6,6,6,7} + #elif DECDPUN==9 + #define DECDPUNMAX 999999999 + #define D2UTABLE {0,1,1,1,1,1,1,1,1,1,2,2,2,2,2,2,2,2,2,3,3,3, \ + 3,3,3,3,3,3,4,4,4,4,4,4,4,4,4,5,5,5,5,5,5,5, \ + 5,5,6,6,6,6} + #elif defined(DECDPUN) + #error DECDPUN must be in the range 1-9 + #endif + + /* ----- Shared data (in decNumber.c) ----- */ + /* Public lookup table used by the D2U macro (see below) */ + #define DECMAXD2U 49 + extern const uByte d2utable[DECMAXD2U+1]; + + /* ----- Macros ----- */ + /* ISZERO -- return true if decNumber dn is a zero */ + /* [performance-critical in some situations] */ + #define ISZERO(dn) decNumberIsZero(dn) /* now just a local name */ + + /* D2U -- return the number of Units needed to hold d digits */ + /* (runtime version, with table lookaside for small d) */ + #if DECDPUN==8 + #define D2U(d) ((unsigned)((d)<=DECMAXD2U?d2utable[d]:((d)+7)>>3)) + #elif DECDPUN==4 + #define D2U(d) ((unsigned)((d)<=DECMAXD2U?d2utable[d]:((d)+3)>>2)) + #else + #define D2U(d) ((d)<=DECMAXD2U?d2utable[d]:((d)+DECDPUN-1)/DECDPUN) + #endif + /* SD2U -- static D2U macro (for compile-time calculation) */ + #define SD2U(d) (((d)+DECDPUN-1)/DECDPUN) + + /* MSUDIGITS -- returns digits in msu, from digits, calculated */ + /* using D2U */ + #define MSUDIGITS(d) ((d)-(D2U(d)-1)*DECDPUN) + + /* D2N -- return the number of decNumber structs that would be */ + /* needed to contain that number of digits (and the initial */ + /* decNumber struct) safely. Note that one Unit is included in the */ + /* initial structure. Used for allocating space that is aligned on */ + /* a decNumber struct boundary. */ + #define D2N(d) \ + ((((SD2U(d)-1)*sizeof(Unit))+sizeof(decNumber)*2-1)/sizeof(decNumber)) + + /* TODIGIT -- macro to remove the leading digit from the unsigned */ + /* integer u at column cut (counting from the right, LSD=0) and */ + /* place it as an ASCII character into the character pointed to by */ + /* c. Note that cut must be <= 9, and the maximum value for u is */ + /* 2,000,000,000 (as is needed for negative exponents of */ + /* subnormals). The unsigned integer pow is used as a temporary */ + /* variable. */ + #define TODIGIT(u, cut, c, pow) { \ + *(c)='0'; \ + pow=DECPOWERS[cut]*2; \ + if ((u)>pow) { \ + pow*=4; \ + if ((u)>=pow) {(u)-=pow; *(c)+=8;} \ + pow/=2; \ + if ((u)>=pow) {(u)-=pow; *(c)+=4;} \ + pow/=2; \ + } \ + if ((u)>=pow) {(u)-=pow; *(c)+=2;} \ + pow/=2; \ + if ((u)>=pow) {(u)-=pow; *(c)+=1;} \ + } + + /* ---------------------------------------------------------------- */ + /* Definitions for fixed-precision modules (only valid after */ + /* decSingle.h, decDouble.h, or decQuad.h has been included) */ + /* ---------------------------------------------------------------- */ + + /* bcdnum -- a structure describing a format-independent finite */ + /* number, whose coefficient is a string of bcd8 uBytes */ + typedef struct { + uByte *msd; /* -> most significant digit */ + uByte *lsd; /* -> least ditto */ + uInt sign; /* 0=positive, DECFLOAT_Sign=negative */ + Int exponent; /* Unadjusted signed exponent (q), or */ + /* DECFLOAT_NaN etc. for a special */ + } bcdnum; + + /* Test if exponent or bcdnum exponent must be a special, etc. */ + #define EXPISSPECIAL(exp) ((exp)>=DECFLOAT_MinSp) + #define EXPISINF(exp) (exp==DECFLOAT_Inf) + #define EXPISNAN(exp) (exp==DECFLOAT_qNaN || exp==DECFLOAT_sNaN) + #define NUMISSPECIAL(num) (EXPISSPECIAL((num)->exponent)) + + /* Refer to a 32-bit word or byte in a decFloat (df) by big-endian */ + /* (array) notation (the 0 word or byte contains the sign bit), */ + /* automatically adjusting for endianness; similarly address a word */ + /* in the next-wider format (decFloatWider, or dfw) */ + #define DECWORDS (DECBYTES/4) + #define DECWWORDS (DECWBYTES/4) + #if DECLITEND + #define DFWORD(df, off) UINTAT((df)->bytes+(DECWORDS-1-(off))*4) + #define DFBYTE(df, off) UBYTEAT((df)->bytes+(DECBYTES-1-(off))) + #define DFWWORD(dfw, off) UINTAT((dfw)->bytes+(DECWWORDS-1-(off))*4) + #else + #define DFWORD(df, off) UINTAT((df)->bytes+(off)*4) + #define DFBYTE(df, off) UBYTEAT((df)->bytes+(off)) + #define DFWWORD(dfw, off) UINTAT((dfw)->bytes+(off)*4) + #endif + + /* Tests for sign or specials, directly on DECFLOATs */ + #define DFISSIGNED(df) (DFWORD(df, 0)&0x80000000) + #define DFISSPECIAL(df) ((DFWORD(df, 0)&0x78000000)==0x78000000) + #define DFISINF(df) ((DFWORD(df, 0)&0x7c000000)==0x78000000) + #define DFISNAN(df) ((DFWORD(df, 0)&0x7c000000)==0x7c000000) + #define DFISQNAN(df) ((DFWORD(df, 0)&0x7e000000)==0x7c000000) + #define DFISSNAN(df) ((DFWORD(df, 0)&0x7e000000)==0x7e000000) + + /* Shared lookup tables */ + extern const uInt DECCOMBMSD[64]; /* Combination field -> MSD */ + extern const uInt DECCOMBFROM[48]; /* exp+msd -> Combination */ + + /* Private generic (utility) routine */ + #if DECCHECK || DECTRACE + extern void decShowNum(const bcdnum *, const char *); + #endif + + /* Format-dependent macros and constants */ + #if defined(DECPMAX) + + /* Useful constants */ + #define DECPMAX9 (ROUNDUP(DECPMAX, 9)/9) /* 'Pmax' in 10**9s */ + /* Top words for a zero */ + #define SINGLEZERO 0x22500000 + #define DOUBLEZERO 0x22380000 + #define QUADZERO 0x22080000 + /* [ZEROWORD is defined to be one of these in the DFISZERO macro] */ + + /* Format-dependent common tests: */ + /* DFISZERO -- test for (any) zero */ + /* DFISCCZERO -- test for coefficient continuation being zero */ + /* DFISCC01 -- test for coefficient contains only 0s and 1s */ + /* DFISINT -- test for finite and exponent q=0 */ + /* DFISUINT01 -- test for sign=0, finite, exponent q=0, and */ + /* MSD=0 or 1 */ + /* ZEROWORD is also defined here. */ + /* In DFISZERO the first test checks the least-significant word */ + /* (most likely to be non-zero); the penultimate tests MSD and */ + /* DPDs in the signword, and the final test excludes specials and */ + /* MSD>7. DFISINT similarly has to allow for the two forms of */ + /* MSD codes. DFISUINT01 only has to allow for one form of MSD */ + /* code. */ + #if DECPMAX==7 + #define ZEROWORD SINGLEZERO + /* [test macros not needed except for Zero] */ + #define DFISZERO(df) ((DFWORD(df, 0)&0x1c0fffff)==0 \ + && (DFWORD(df, 0)&0x60000000)!=0x60000000) + #elif DECPMAX==16 + #define ZEROWORD DOUBLEZERO + #define DFISZERO(df) ((DFWORD(df, 1)==0 \ + && (DFWORD(df, 0)&0x1c03ffff)==0 \ + && (DFWORD(df, 0)&0x60000000)!=0x60000000)) + #define DFISINT(df) ((DFWORD(df, 0)&0x63fc0000)==0x22380000 \ + ||(DFWORD(df, 0)&0x7bfc0000)==0x6a380000) + #define DFISUINT01(df) ((DFWORD(df, 0)&0xfbfc0000)==0x22380000) + #define DFISCCZERO(df) (DFWORD(df, 1)==0 \ + && (DFWORD(df, 0)&0x0003ffff)==0) + #define DFISCC01(df) ((DFWORD(df, 0)&~0xfffc9124)==0 \ + && (DFWORD(df, 1)&~0x49124491)==0) + #elif DECPMAX==34 + #define ZEROWORD QUADZERO + #define DFISZERO(df) ((DFWORD(df, 3)==0 \ + && DFWORD(df, 2)==0 \ + && DFWORD(df, 1)==0 \ + && (DFWORD(df, 0)&0x1c003fff)==0 \ + && (DFWORD(df, 0)&0x60000000)!=0x60000000)) + #define DFISINT(df) ((DFWORD(df, 0)&0x63ffc000)==0x22080000 \ + ||(DFWORD(df, 0)&0x7bffc000)==0x6a080000) + #define DFISUINT01(df) ((DFWORD(df, 0)&0xfbffc000)==0x22080000) + #define DFISCCZERO(df) (DFWORD(df, 3)==0 \ + && DFWORD(df, 2)==0 \ + && DFWORD(df, 1)==0 \ + && (DFWORD(df, 0)&0x00003fff)==0) + + #define DFISCC01(df) ((DFWORD(df, 0)&~0xffffc912)==0 \ + && (DFWORD(df, 1)&~0x44912449)==0 \ + && (DFWORD(df, 2)&~0x12449124)==0 \ + && (DFWORD(df, 3)&~0x49124491)==0) + #endif + + /* Macros to test if a certain 10 bits of a uInt or pair of uInts */ + /* are a canonical declet [higher or lower bits are ignored]. */ + /* declet is at offset 0 (from the right) in a uInt: */ + #define CANONDPD(dpd) (((dpd)&0x300)==0 || ((dpd)&0x6e)!=0x6e) + /* declet is at offset k (a multiple of 2) in a uInt: */ + #define CANONDPDOFF(dpd, k) (((dpd)&(0x300<<(k)))==0 \ + || ((dpd)&(((uInt)0x6e)<<(k)))!=(((uInt)0x6e)<<(k))) + /* declet is at offset k (a multiple of 2) in a pair of uInts: */ + /* [the top 2 bits will always be in the more-significant uInt] */ + #define CANONDPDTWO(hi, lo, k) (((hi)&(0x300>>(32-(k))))==0 \ + || ((hi)&(0x6e>>(32-(k))))!=(0x6e>>(32-(k))) \ + || ((lo)&(((uInt)0x6e)<<(k)))!=(((uInt)0x6e)<<(k))) + + /* Macro to test whether a full-length (length DECPMAX) BCD8 */ + /* coefficient is zero */ + /* test just the LSWord first, then the remainder */ + #if DECPMAX==7 + #define ISCOEFFZERO(u) (UINTAT((u)+DECPMAX-4)==0 \ + && UINTAT((u)+DECPMAX-7)==0) + #elif DECPMAX==16 + #define ISCOEFFZERO(u) (UINTAT((u)+DECPMAX-4)==0 \ + && (UINTAT((u)+DECPMAX-8)+UINTAT((u)+DECPMAX-12) \ + +UINTAT((u)+DECPMAX-16))==0) + #elif DECPMAX==34 + #define ISCOEFFZERO(u) (UINTAT((u)+DECPMAX-4)==0 \ + && (UINTAT((u)+DECPMAX-8) +UINTAT((u)+DECPMAX-12) \ + +UINTAT((u)+DECPMAX-16)+UINTAT((u)+DECPMAX-20) \ + +UINTAT((u)+DECPMAX-24)+UINTAT((u)+DECPMAX-28) \ + +UINTAT((u)+DECPMAX-32)+USHORTAT((u)+DECPMAX-34))==0) + #endif + + /* Macros and masks for the exponent continuation field and MSD */ + /* Get the exponent continuation from a decFloat *df as an Int */ + #define GETECON(df) ((Int)((DFWORD((df), 0)&0x03ffffff)>>(32-6-DECECONL))) + /* Ditto, from the next-wider format */ + #define GETWECON(df) ((Int)((DFWWORD((df), 0)&0x03ffffff)>>(32-6-DECWECONL))) + /* Get the biased exponent similarly */ + #define GETEXP(df) ((Int)(DECCOMBEXP[DFWORD((df), 0)>>26]+GETECON(df))) + /* Get the unbiased exponent similarly */ + #define GETEXPUN(df) ((Int)GETEXP(df)-DECBIAS) + /* Get the MSD similarly (as uInt) */ + #define GETMSD(df) (DECCOMBMSD[DFWORD((df), 0)>>26]) + + /* Compile-time computes of the exponent continuation field masks */ + /* full exponent continuation field: */ + #define ECONMASK ((0x03ffffff>>(32-6-DECECONL))<<(32-6-DECECONL)) + /* same, not including its first digit (the qNaN/sNaN selector): */ + #define ECONNANMASK ((0x01ffffff>>(32-6-DECECONL))<<(32-6-DECECONL)) + + /* Macros to decode the coefficient in a finite decFloat *df into */ + /* a BCD string (uByte *bcdin) of length DECPMAX uBytes */ + + /* In-line sequence to convert 10 bits at right end of uInt dpd */ + /* to three BCD8 digits starting at uByte u. Note that an extra */ + /* byte is written to the right of the three digits because this */ + /* moves four at a time for speed; the alternative macro moves */ + /* exactly three bytes */ + #define dpd2bcd8(u, dpd) { \ + UINTAT(u)=UINTAT(&DPD2BCD8[((dpd)&0x3ff)*4]);} + + #define dpd2bcd83(u, dpd) { \ + *(u)=DPD2BCD8[((dpd)&0x3ff)*4]; \ + *(u+1)=DPD2BCD8[((dpd)&0x3ff)*4+1]; \ + *(u+2)=DPD2BCD8[((dpd)&0x3ff)*4+2];} + + /* Decode the declets. After extracting each one, it is decoded */ + /* to BCD8 using a table lookup (also used for variable-length */ + /* decode). Each DPD decode is 3 bytes BCD8 plus a one-byte */ + /* length which is not used, here). Fixed-length 4-byte moves */ + /* are fast, however, almost everywhere, and so are used except */ + /* for the final three bytes (to avoid overrun). The code below */ + /* is 36 instructions for Doubles and about 70 for Quads, even */ + /* on IA32. */ + + /* Two macros are defined for each format: */ + /* GETCOEFF extracts the coefficient of the current format */ + /* GETWCOEFF extracts the coefficient of the next-wider format. */ + /* The latter is a copy of the next-wider GETCOEFF using DFWWORD. */ + + #if DECPMAX==7 + #define GETCOEFF(df, bcd) { \ + uInt sourhi=DFWORD(df, 0); \ + *(bcd)=(uByte)DECCOMBMSD[sourhi>>26]; \ + dpd2bcd8(bcd+1, sourhi>>10); \ + dpd2bcd83(bcd+4, sourhi);} + #define GETWCOEFF(df, bcd) { \ + uInt sourhi=DFWWORD(df, 0); \ + uInt sourlo=DFWWORD(df, 1); \ + *(bcd)=(uByte)DECCOMBMSD[sourhi>>26]; \ + dpd2bcd8(bcd+1, sourhi>>8); \ + dpd2bcd8(bcd+4, (sourhi<<2) | (sourlo>>30)); \ + dpd2bcd8(bcd+7, sourlo>>20); \ + dpd2bcd8(bcd+10, sourlo>>10); \ + dpd2bcd83(bcd+13, sourlo);} + + #elif DECPMAX==16 + #define GETCOEFF(df, bcd) { \ + uInt sourhi=DFWORD(df, 0); \ + uInt sourlo=DFWORD(df, 1); \ + *(bcd)=(uByte)DECCOMBMSD[sourhi>>26]; \ + dpd2bcd8(bcd+1, sourhi>>8); \ + dpd2bcd8(bcd+4, (sourhi<<2) | (sourlo>>30)); \ + dpd2bcd8(bcd+7, sourlo>>20); \ + dpd2bcd8(bcd+10, sourlo>>10); \ + dpd2bcd83(bcd+13, sourlo);} + #define GETWCOEFF(df, bcd) { \ + uInt sourhi=DFWWORD(df, 0); \ + uInt sourmh=DFWWORD(df, 1); \ + uInt sourml=DFWWORD(df, 2); \ + uInt sourlo=DFWWORD(df, 3); \ + *(bcd)=(uByte)DECCOMBMSD[sourhi>>26]; \ + dpd2bcd8(bcd+1, sourhi>>4); \ + dpd2bcd8(bcd+4, ((sourhi)<<6) | (sourmh>>26)); \ + dpd2bcd8(bcd+7, sourmh>>16); \ + dpd2bcd8(bcd+10, sourmh>>6); \ + dpd2bcd8(bcd+13, ((sourmh)<<4) | (sourml>>28)); \ + dpd2bcd8(bcd+16, sourml>>18); \ + dpd2bcd8(bcd+19, sourml>>8); \ + dpd2bcd8(bcd+22, ((sourml)<<2) | (sourlo>>30)); \ + dpd2bcd8(bcd+25, sourlo>>20); \ + dpd2bcd8(bcd+28, sourlo>>10); \ + dpd2bcd83(bcd+31, sourlo);} + + #elif DECPMAX==34 + #define GETCOEFF(df, bcd) { \ + uInt sourhi=DFWORD(df, 0); \ + uInt sourmh=DFWORD(df, 1); \ + uInt sourml=DFWORD(df, 2); \ + uInt sourlo=DFWORD(df, 3); \ + *(bcd)=(uByte)DECCOMBMSD[sourhi>>26]; \ + dpd2bcd8(bcd+1, sourhi>>4); \ + dpd2bcd8(bcd+4, ((sourhi)<<6) | (sourmh>>26)); \ + dpd2bcd8(bcd+7, sourmh>>16); \ + dpd2bcd8(bcd+10, sourmh>>6); \ + dpd2bcd8(bcd+13, ((sourmh)<<4) | (sourml>>28)); \ + dpd2bcd8(bcd+16, sourml>>18); \ + dpd2bcd8(bcd+19, sourml>>8); \ + dpd2bcd8(bcd+22, ((sourml)<<2) | (sourlo>>30)); \ + dpd2bcd8(bcd+25, sourlo>>20); \ + dpd2bcd8(bcd+28, sourlo>>10); \ + dpd2bcd83(bcd+31, sourlo);} + + #define GETWCOEFF(df, bcd) {??} /* [should never be used] */ + #endif + + /* Macros to decode the coefficient in a finite decFloat *df into */ + /* a base-billion uInt array, with the least-significant */ + /* 0-999999999 'digit' at offset 0. */ + + /* Decode the declets. After extracting each one, it is decoded */ + /* to binary using a table lookup. Three tables are used; one */ + /* the usual DPD to binary, the other two pre-multiplied by 1000 */ + /* and 1000000 to avoid multiplication during decode. These */ + /* tables can also be used for multiplying up the MSD as the DPD */ + /* code for 0 through 9 is the identity. */ + #define DPD2BIN0 DPD2BIN /* for prettier code */ + + #if DECPMAX==7 + #define GETCOEFFBILL(df, buf) { \ + uInt sourhi=DFWORD(df, 0); \ + (buf)[0]=DPD2BIN0[sourhi&0x3ff] \ + +DPD2BINK[(sourhi>>10)&0x3ff] \ + +DPD2BINM[DECCOMBMSD[sourhi>>26]];} + + #elif DECPMAX==16 + #define GETCOEFFBILL(df, buf) { \ + uInt sourhi, sourlo; \ + sourlo=DFWORD(df, 1); \ + (buf)[0]=DPD2BIN0[sourlo&0x3ff] \ + +DPD2BINK[(sourlo>>10)&0x3ff] \ + +DPD2BINM[(sourlo>>20)&0x3ff]; \ + sourhi=DFWORD(df, 0); \ + (buf)[1]=DPD2BIN0[((sourhi<<2) | (sourlo>>30))&0x3ff] \ + +DPD2BINK[(sourhi>>8)&0x3ff] \ + +DPD2BINM[DECCOMBMSD[sourhi>>26]];} + + #elif DECPMAX==34 + #define GETCOEFFBILL(df, buf) { \ + uInt sourhi, sourmh, sourml, sourlo; \ + sourlo=DFWORD(df, 3); \ + (buf)[0]=DPD2BIN0[sourlo&0x3ff] \ + +DPD2BINK[(sourlo>>10)&0x3ff] \ + +DPD2BINM[(sourlo>>20)&0x3ff]; \ + sourml=DFWORD(df, 2); \ + (buf)[1]=DPD2BIN0[((sourml<<2) | (sourlo>>30))&0x3ff] \ + +DPD2BINK[(sourml>>8)&0x3ff] \ + +DPD2BINM[(sourml>>18)&0x3ff]; \ + sourmh=DFWORD(df, 1); \ + (buf)[2]=DPD2BIN0[((sourmh<<4) | (sourml>>28))&0x3ff] \ + +DPD2BINK[(sourmh>>6)&0x3ff] \ + +DPD2BINM[(sourmh>>16)&0x3ff]; \ + sourhi=DFWORD(df, 0); \ + (buf)[3]=DPD2BIN0[((sourhi<<6) | (sourmh>>26))&0x3ff] \ + +DPD2BINK[(sourhi>>4)&0x3ff] \ + +DPD2BINM[DECCOMBMSD[sourhi>>26]];} + + #endif + + /* Macros to decode the coefficient in a finite decFloat *df into */ + /* a base-thousand uInt array, with the least-significant 0-999 */ + /* 'digit' at offset 0. */ + + /* Decode the declets. After extracting each one, it is decoded */ + /* to binary using a table lookup. */ + #if DECPMAX==7 + #define GETCOEFFTHOU(df, buf) { \ + uInt sourhi=DFWORD(df, 0); \ + (buf)[0]=DPD2BIN[sourhi&0x3ff]; \ + (buf)[1]=DPD2BIN[(sourhi>>10)&0x3ff]; \ + (buf)[2]=DECCOMBMSD[sourhi>>26];} + + #elif DECPMAX==16 + #define GETCOEFFTHOU(df, buf) { \ + uInt sourhi, sourlo; \ + sourlo=DFWORD(df, 1); \ + (buf)[0]=DPD2BIN[sourlo&0x3ff]; \ + (buf)[1]=DPD2BIN[(sourlo>>10)&0x3ff]; \ + (buf)[2]=DPD2BIN[(sourlo>>20)&0x3ff]; \ + sourhi=DFWORD(df, 0); \ + (buf)[3]=DPD2BIN[((sourhi<<2) | (sourlo>>30))&0x3ff]; \ + (buf)[4]=DPD2BIN[(sourhi>>8)&0x3ff]; \ + (buf)[5]=DECCOMBMSD[sourhi>>26];} + + #elif DECPMAX==34 + #define GETCOEFFTHOU(df, buf) { \ + uInt sourhi, sourmh, sourml, sourlo; \ + sourlo=DFWORD(df, 3); \ + (buf)[0]=DPD2BIN[sourlo&0x3ff]; \ + (buf)[1]=DPD2BIN[(sourlo>>10)&0x3ff]; \ + (buf)[2]=DPD2BIN[(sourlo>>20)&0x3ff]; \ + sourml=DFWORD(df, 2); \ + (buf)[3]=DPD2BIN[((sourml<<2) | (sourlo>>30))&0x3ff]; \ + (buf)[4]=DPD2BIN[(sourml>>8)&0x3ff]; \ + (buf)[5]=DPD2BIN[(sourml>>18)&0x3ff]; \ + sourmh=DFWORD(df, 1); \ + (buf)[6]=DPD2BIN[((sourmh<<4) | (sourml>>28))&0x3ff]; \ + (buf)[7]=DPD2BIN[(sourmh>>6)&0x3ff]; \ + (buf)[8]=DPD2BIN[(sourmh>>16)&0x3ff]; \ + sourhi=DFWORD(df, 0); \ + (buf)[9]=DPD2BIN[((sourhi<<6) | (sourmh>>26))&0x3ff]; \ + (buf)[10]=DPD2BIN[(sourhi>>4)&0x3ff]; \ + (buf)[11]=DECCOMBMSD[sourhi>>26];} + + #endif + + /* Set a decFloat to the maximum positive finite number (Nmax) */ + #if DECPMAX==7 + #define DFSETNMAX(df) \ + {DFWORD(df, 0)=0x77f3fcff;} + #elif DECPMAX==16 + #define DFSETNMAX(df) \ + {DFWORD(df, 0)=0x77fcff3f; \ + DFWORD(df, 1)=0xcff3fcff;} + #elif DECPMAX==34 + #define DFSETNMAX(df) \ + {DFWORD(df, 0)=0x77ffcff3; \ + DFWORD(df, 1)=0xfcff3fcf; \ + DFWORD(df, 2)=0xf3fcff3f; \ + DFWORD(df, 3)=0xcff3fcff;} + #endif + + /* [end of format-dependent macros and constants] */ + #endif + +#else + #error decNumberLocal included more than once +#endif diff --git a/libdecnumber/decNumberSymbols.h b/libdecnumber/decNumberSymbols.h new file mode 100644 index 0000000..e638a07 --- /dev/null +++ b/libdecnumber/decNumberSymbols.h @@ -0,0 +1,69 @@ +#if !defined(DECNUMBERSYMBOLS) +#define DECNUMBERSYMBOLS + +#ifdef IN_LIBGCC2 +#define decNumberAbs __decNumberAbs +#define decNumberAdd __decNumberAdd +#define decNumberAnd __decNumberAnd +#define decNumberClass __decNumberClass +#define decNumberClassToString __decNumberClassToString +#define decNumberCompare __decNumberCompare +#define decNumberCompareSignal __decNumberCompareSignal +#define decNumberCompareTotal __decNumberCompareTotal +#define decNumberCompareTotalMag __decNumberCompareTotalMag +#define decNumberCopy __decNumberCopy +#define decNumberCopyAbs __decNumberCopyAbs +#define decNumberCopyNegate __decNumberCopyNegate +#define decNumberCopySign __decNumberCopySign +#define decNumberDivide __decNumberDivide +#define decNumberDivideInteger __decNumberDivideInteger +#define decNumberExp __decNumberExp +#define decNumberFMA __decNumberFMA +#define decNumberFromInt32 __decNumberFromInt32 +#define decNumberFromString __decNumberFromString +#define decNumberFromUInt32 __decNumberFromUInt32 +#define decNumberGetBCD __decNumberGetBCD +#define decNumberInvert __decNumberInvert +#define decNumberIsNormal __decNumberIsNormal +#define decNumberIsSubnormal __decNumberIsSubnormal +#define decNumberLn __decNumberLn +#define decNumberLog10 __decNumberLog10 +#define decNumberLogB __decNumberLogB +#define decNumberMax __decNumberMax +#define decNumberMaxMag __decNumberMaxMag +#define decNumberMin __decNumberMin +#define decNumberMinMag __decNumberMinMag +#define decNumberMinus __decNumberMinus +#define decNumberMultiply __decNumberMultiply +#define decNumberNextMinus __decNumberNextMinus +#define decNumberNextPlus __decNumberNextPlus +#define decNumberNextToward __decNumberNextToward +#define decNumberNormalize __decNumberNormalize +#define decNumberOr __decNumberOr +#define decNumberPlus __decNumberPlus +#define decNumberPower __decNumberPower +#define decNumberQuantize __decNumberQuantize +#define decNumberReduce __decNumberReduce +#define decNumberRemainder __decNumberRemainder +#define decNumberRemainderNear __decNumberRemainderNear +#define decNumberRescale __decNumberRescale +#define decNumberRotate __decNumberRotate +#define decNumberSameQuantum __decNumberSameQuantum +#define decNumberScaleB __decNumberScaleB +#define decNumberSetBCD __decNumberSetBCD +#define decNumberShift __decNumberShift +#define decNumberSquareRoot __decNumberSquareRoot +#define decNumberSubtract __decNumberSubtract +#define decNumberToEngString __decNumberToEngString +#define decNumberToInt32 __decNumberToInt32 +#define decNumberToIntegralExact __decNumberToIntegralExact +#define decNumberToIntegralValue __decNumberToIntegralValue +#define decNumberToString __decNumberToString +#define decNumberToUInt32 __decNumberToUInt32 +#define decNumberTrim __decNumberTrim +#define decNumberVersion __decNumberVersion +#define decNumberXor __decNumberXor +#define decNumberZero __decNumberZero +#endif + +#endif diff --git a/libdecnumber/decPacked.c b/libdecnumber/decPacked.c new file mode 100644 index 0000000..2b912fe --- /dev/null +++ b/libdecnumber/decPacked.c @@ -0,0 +1,235 @@ +/* Packed decimal conversion module for the decNumber C Library. + Copyright (C) 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* Packed Decimal conversion module */ +/* ------------------------------------------------------------------ */ +/* This module comprises the routines for Packed Decimal format */ +/* numbers. Conversions are supplied to and from decNumber, which in */ +/* turn supports: */ +/* conversions to and from string */ +/* arithmetic routines */ +/* utilities. */ +/* Conversions from decNumber to and from densely packed decimal */ +/* formats are provided by the decimal32 through decimal128 modules. */ +/* ------------------------------------------------------------------ */ + +#include <string.h> /* for NULL */ +#include "decNumber.h" /* base number library */ +#include "decPacked.h" /* packed decimal */ +#include "decNumberLocal.h" /* decNumber local types, etc. */ + +/* ------------------------------------------------------------------ */ +/* decPackedFromNumber -- convert decNumber to BCD Packed Decimal */ +/* */ +/* bcd is the BCD bytes */ +/* length is the length of the BCD array */ +/* scale is the scale result */ +/* dn is the decNumber */ +/* returns bcd, or NULL if error */ +/* */ +/* The number is converted to a BCD packed decimal byte array, */ +/* right aligned in the bcd array, whose length is indicated by the */ +/* second parameter. The final 4-bit nibble in the array will be a */ +/* sign nibble, C (1100) for + and D (1101) for -. Unused bytes and */ +/* nibbles to the left of the number are set to 0. */ +/* */ +/* scale is set to the scale of the number (this is the exponent, */ +/* negated). To force the number to a specified scale, first use the */ +/* decNumberRescale routine, which will round and change the exponent */ +/* as necessary. */ +/* */ +/* If there is an error (that is, the decNumber has too many digits */ +/* to fit in length bytes, or it is a NaN or Infinity), NULL is */ +/* returned and the bcd and scale results are unchanged. Otherwise */ +/* bcd is returned. */ +/* ------------------------------------------------------------------ */ +uByte * decPackedFromNumber(uByte *bcd, Int length, Int *scale, + const decNumber *dn) { + const Unit *up=dn->lsu; /* Unit array pointer */ + uByte obyte, *out; /* current output byte, and where it goes */ + Int indigs=dn->digits; /* digits processed */ + uInt cut=DECDPUN; /* downcounter per Unit */ + uInt u=*up; /* work */ + uInt nib; /* .. */ + #if DECDPUN<=4 + uInt temp; /* .. */ + #endif + + if (dn->digits>length*2-1 /* too long .. */ + ||(dn->bits & DECSPECIAL)) return NULL; /* .. or special -- hopeless */ + + if (dn->bits&DECNEG) obyte=DECPMINUS; /* set the sign .. */ + else obyte=DECPPLUS; + *scale=-dn->exponent; /* .. and scale */ + + /* loop from lowest (rightmost) byte */ + out=bcd+length-1; /* -> final byte */ + for (; out>=bcd; out--) { + if (indigs>0) { + if (cut==0) { + up++; + u=*up; + cut=DECDPUN; + } + #if DECDPUN<=4 + temp=(u*6554)>>16; /* fast /10 */ + nib=u-X10(temp); + u=temp; + #else + nib=u%10; /* cannot use *6554 trick :-( */ + u=u/10; + #endif + obyte|=(nib<<4); + indigs--; + cut--; + } + *out=obyte; + obyte=0; /* assume 0 */ + if (indigs>0) { + if (cut==0) { + up++; + u=*up; + cut=DECDPUN; + } + #if DECDPUN<=4 + temp=(u*6554)>>16; /* as above */ + obyte=(uByte)(u-X10(temp)); + u=temp; + #else + obyte=(uByte)(u%10); + u=u/10; + #endif + indigs--; + cut--; + } + } /* loop */ + + return bcd; + } /* decPackedFromNumber */ + +/* ------------------------------------------------------------------ */ +/* decPackedToNumber -- convert BCD Packed Decimal to a decNumber */ +/* */ +/* bcd is the BCD bytes */ +/* length is the length of the BCD array */ +/* scale is the scale associated with the BCD integer */ +/* dn is the decNumber [with space for length*2 digits] */ +/* returns dn, or NULL if error */ +/* */ +/* The BCD packed decimal byte array, together with an associated */ +/* scale, is converted to a decNumber. The BCD array is assumed full */ +/* of digits, and must be ended by a 4-bit sign nibble in the least */ +/* significant four bits of the final byte. */ +/* */ +/* The scale is used (negated) as the exponent of the decNumber. */ +/* Note that zeros may have a sign and/or a scale. */ +/* */ +/* The decNumber structure is assumed to have sufficient space to */ +/* hold the converted number (that is, up to length*2-1 digits), so */ +/* no error is possible unless the adjusted exponent is out of range, */ +/* no sign nibble was found, or a sign nibble was found before the */ +/* final nibble. In these error cases, NULL is returned and the */ +/* decNumber will be 0. */ +/* ------------------------------------------------------------------ */ +decNumber * decPackedToNumber(const uByte *bcd, Int length, + const Int *scale, decNumber *dn) { + const uByte *last=bcd+length-1; /* -> last byte */ + const uByte *first; /* -> first non-zero byte */ + uInt nib; /* work nibble */ + Unit *up=dn->lsu; /* output pointer */ + Int digits; /* digits count */ + Int cut=0; /* phase of output */ + + decNumberZero(dn); /* default result */ + last=&bcd[length-1]; + nib=*last & 0x0f; /* get the sign */ + if (nib==DECPMINUS || nib==DECPMINUSALT) dn->bits=DECNEG; + else if (nib<=9) return NULL; /* not a sign nibble */ + + /* skip leading zero bytes [final byte is always non-zero, due to sign] */ + for (first=bcd; *first==0;) first++; + digits=(last-first)*2+1; /* calculate digits .. */ + if ((*first & 0xf0)==0) digits--; /* adjust for leading zero nibble */ + if (digits!=0) dn->digits=digits; /* count of actual digits [if 0, */ + /* leave as 1] */ + + /* check the adjusted exponent; note that scale could be unbounded */ + dn->exponent=-*scale; /* set the exponent */ + if (*scale>=0) { /* usual case */ + if ((dn->digits-*scale-1)<-DECNUMMAXE) { /* underflow */ + decNumberZero(dn); + return NULL;} + } + else { /* -ve scale; +ve exponent */ + /* need to be careful to avoid wrap, here, also BADINT case */ + if ((*scale<-DECNUMMAXE) /* overflow even without digits */ + || ((dn->digits-*scale-1)>DECNUMMAXE)) { /* overflow */ + decNumberZero(dn); + return NULL;} + } + if (digits==0) return dn; /* result was zero */ + + /* copy the digits to the number's units, starting at the lsu */ + /* [unrolled] */ + for (;;) { /* forever */ + /* left nibble first */ + nib=(unsigned)(*last & 0xf0)>>4; + /* got a digit, in nib */ + if (nib>9) {decNumberZero(dn); return NULL;} + + if (cut==0) *up=(Unit)nib; + else *up=(Unit)(*up+nib*DECPOWERS[cut]); + digits--; + if (digits==0) break; /* got them all */ + cut++; + if (cut==DECDPUN) { + up++; + cut=0; + } + last--; /* ready for next */ + nib=*last & 0x0f; /* get right nibble */ + if (nib>9) {decNumberZero(dn); return NULL;} + + /* got a digit, in nib */ + if (cut==0) *up=(Unit)nib; + else *up=(Unit)(*up+nib*DECPOWERS[cut]); + digits--; + if (digits==0) break; /* got them all */ + cut++; + if (cut==DECDPUN) { + up++; + cut=0; + } + } /* forever */ + + return dn; + } /* decPackedToNumber */ + diff --git a/libdecnumber/decPacked.h b/libdecnumber/decPacked.h new file mode 100644 index 0000000..c76aa09 --- /dev/null +++ b/libdecnumber/decPacked.h @@ -0,0 +1,70 @@ +/* Packed decimal conversion module header for the decNumber C Library. + Copyright (C) 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* Packed Decimal conversion module header */ +/* ------------------------------------------------------------------ */ + +#if !defined(DECPACKED) + #define DECPACKED + #define DECPNAME "decPacked" /* Short name */ + #define DECPFULLNAME "Packed Decimal conversions" /* Verbose name */ + #define DECPAUTHOR "Mike Cowlishaw" /* Who to blame */ + + #define DECPACKED_DefP 32 /* default precision */ + + #ifndef DECNUMDIGITS + #define DECNUMDIGITS DECPACKED_DefP /* size if not already defined*/ + #endif + #include "decNumber.h" /* context and number library */ + + /* Sign nibble constants */ + #if !defined(DECPPLUSALT) + #define DECPPLUSALT 0x0A /* alternate plus nibble */ + #define DECPMINUSALT 0x0B /* alternate minus nibble */ + #define DECPPLUS 0x0C /* preferred plus nibble */ + #define DECPMINUS 0x0D /* preferred minus nibble */ + #define DECPPLUSALT2 0x0E /* alternate plus nibble */ + #define DECPUNSIGNED 0x0F /* alternate plus nibble (unsigned) */ + #endif + + /* ---------------------------------------------------------------- */ + /* decPacked public routines */ + /* ---------------------------------------------------------------- */ + + #include "decPackedSymbols.h" + + /* Conversions */ + uint8_t * decPackedFromNumber(uint8_t *, int32_t, int32_t *, + const decNumber *); + decNumber * decPackedToNumber(const uint8_t *, int32_t, const int32_t *, + decNumber *); + +#endif diff --git a/libdecnumber/decPackedSymbols.h b/libdecnumber/decPackedSymbols.h new file mode 100644 index 0000000..862db40 --- /dev/null +++ b/libdecnumber/decPackedSymbols.h @@ -0,0 +1,9 @@ +#if !defined(DECPACKEDSYMBOLS) +#define DECPACKEDSYMBOLS + +#ifdef IN_LIBGCC2 +#define decPackedFromNumber __decPackedFromNumber +#define decPackedToNumber __decPackedToNumber +#endif + +#endif diff --git a/libdecnumber/decQuad.c b/libdecnumber/decQuad.c new file mode 100644 index 0000000..6ec9b7f --- /dev/null +++ b/libdecnumber/decQuad.c @@ -0,0 +1,146 @@ +/* decQuad module for the decNumber C Library. + Copyright (C) 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* decQuad.c -- decQuad operations module */ +/* ------------------------------------------------------------------ */ +/* This module comprises decQuad operations (including conversions) */ +/* ------------------------------------------------------------------ */ + +#include "decContext.h" /* public includes */ +#include "decQuad.h" /* .. */ + +/* Constant mappings for shared code */ +#define DECPMAX DECQUAD_Pmax +#define DECEMIN DECQUAD_Emin +#define DECEMAX DECQUAD_Emax +#define DECEMAXD DECQUAD_EmaxD +#define DECBYTES DECQUAD_Bytes +#define DECSTRING DECQUAD_String +#define DECECONL DECQUAD_EconL +#define DECBIAS DECQUAD_Bias +#define DECLETS DECQUAD_Declets +#define DECQTINY (-DECQUAD_Bias) + +/* Type and function mappings for shared code */ +#define decFloat decQuad /* Type name */ + +/* Utilities and conversions (binary results, extractors, etc.) */ +#define decFloatFromBCD decQuadFromBCD +#define decFloatFromInt32 decQuadFromInt32 +#define decFloatFromPacked decQuadFromPacked +#define decFloatFromString decQuadFromString +#define decFloatFromUInt32 decQuadFromUInt32 +#define decFloatFromWider decQuadFromWider +#define decFloatGetCoefficient decQuadGetCoefficient +#define decFloatGetExponent decQuadGetExponent +#define decFloatSetCoefficient decQuadSetCoefficient +#define decFloatSetExponent decQuadSetExponent +#define decFloatShow decQuadShow +#define decFloatToBCD decQuadToBCD +#define decFloatToEngString decQuadToEngString +#define decFloatToInt32 decQuadToInt32 +#define decFloatToInt32Exact decQuadToInt32Exact +#define decFloatToPacked decQuadToPacked +#define decFloatToString decQuadToString +#define decFloatToUInt32 decQuadToUInt32 +#define decFloatToUInt32Exact decQuadToUInt32Exact +#define decFloatToWider decQuadToWider +#define decFloatZero decQuadZero + +/* Computational (result is a decFloat) */ +#define decFloatAbs decQuadAbs +#define decFloatAdd decQuadAdd +#define decFloatAnd decQuadAnd +#define decFloatDivide decQuadDivide +#define decFloatDivideInteger decQuadDivideInteger +#define decFloatFMA decQuadFMA +#define decFloatInvert decQuadInvert +#define decFloatLogB decQuadLogB +#define decFloatMax decQuadMax +#define decFloatMaxMag decQuadMaxMag +#define decFloatMin decQuadMin +#define decFloatMinMag decQuadMinMag +#define decFloatMinus decQuadMinus +#define decFloatMultiply decQuadMultiply +#define decFloatNextMinus decQuadNextMinus +#define decFloatNextPlus decQuadNextPlus +#define decFloatNextToward decQuadNextToward +#define decFloatOr decQuadOr +#define decFloatPlus decQuadPlus +#define decFloatQuantize decQuadQuantize +#define decFloatReduce decQuadReduce +#define decFloatRemainder decQuadRemainder +#define decFloatRemainderNear decQuadRemainderNear +#define decFloatRotate decQuadRotate +#define decFloatScaleB decQuadScaleB +#define decFloatShift decQuadShift +#define decFloatSubtract decQuadSubtract +#define decFloatToIntegralValue decQuadToIntegralValue +#define decFloatToIntegralExact decQuadToIntegralExact +#define decFloatXor decQuadXor + +/* Comparisons */ +#define decFloatCompare decQuadCompare +#define decFloatCompareSignal decQuadCompareSignal +#define decFloatCompareTotal decQuadCompareTotal +#define decFloatCompareTotalMag decQuadCompareTotalMag + +/* Copies */ +#define decFloatCanonical decQuadCanonical +#define decFloatCopy decQuadCopy +#define decFloatCopyAbs decQuadCopyAbs +#define decFloatCopyNegate decQuadCopyNegate +#define decFloatCopySign decQuadCopySign + +/* Non-computational */ +#define decFloatClass decQuadClass +#define decFloatClassString decQuadClassString +#define decFloatDigits decQuadDigits +#define decFloatIsCanonical decQuadIsCanonical +#define decFloatIsFinite decQuadIsFinite +#define decFloatIsInfinite decQuadIsInfinite +#define decFloatIsInteger decQuadIsInteger +#define decFloatIsNaN decQuadIsNaN +#define decFloatIsNormal decQuadIsNormal +#define decFloatIsSignaling decQuadIsSignaling +#define decFloatIsSignalling decQuadIsSignalling +#define decFloatIsSigned decQuadIsSigned +#define decFloatIsSubnormal decQuadIsSubnormal +#define decFloatIsZero decQuadIsZero +#define decFloatRadix decQuadRadix +#define decFloatSameQuantum decQuadSameQuantum +#define decFloatVersion decQuadVersion + + +#include "decNumberLocal.h" /* local includes (need DECPMAX) */ +#include "decCommon.c" /* non-arithmetic decFloat routines */ +#include "decBasic.c" /* basic formats routines */ + diff --git a/libdecnumber/decQuad.h b/libdecnumber/decQuad.h new file mode 100644 index 0000000..39f75d3 --- /dev/null +++ b/libdecnumber/decQuad.h @@ -0,0 +1,186 @@ +/* decQuad module header for the decNumber C Library. + Copyright (C) 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* decQuad.h -- Decimal 128-bit format module header */ +/* ------------------------------------------------------------------ */ +/* Please see decFloats.h for an overview and documentation details. */ +/* ------------------------------------------------------------------ */ +/* This include file is always included by decSingle and decDouble, */ +/* and therefore also holds useful constants used by all three. */ + +#if !defined(DECQUAD) + #define DECQUAD + + #define DECQUADNAME "decimalQuad" /* Short name */ + #define DECQUADTITLE "Decimal 128-bit datum" /* Verbose name */ + #define DECQUADAUTHOR "Mike Cowlishaw" /* Who to blame */ + + /* parameters for decQuads */ + #define DECQUAD_Bytes 16 /* length */ + #define DECQUAD_Pmax 34 /* maximum precision (digits) */ + #define DECQUAD_Emin -6143 /* minimum adjusted exponent */ + #define DECQUAD_Emax 6144 /* maximum adjusted exponent */ + #define DECQUAD_EmaxD 4 /* maximum exponent digits */ + #define DECQUAD_Bias 6176 /* bias for the exponent */ + #define DECQUAD_String 43 /* maximum string length, +1 */ + #define DECQUAD_EconL 12 /* exponent continuation length */ + #define DECQUAD_Declets 11 /* count of declets */ + /* highest biased exponent (Elimit-1) */ + #define DECQUAD_Ehigh (DECQUAD_Emax + DECQUAD_Bias - (DECQUAD_Pmax-1)) + + /* Required include */ + #include "decContext.h" + + /* The decQuad decimal 128-bit type, accessible by bytes */ + typedef struct { + uint8_t bytes[DECQUAD_Bytes]; /* fields: 1, 5, 12, 110 bits */ + } decQuad; + + /* ---------------------------------------------------------------- */ + /* Shared constants */ + /* ---------------------------------------------------------------- */ + + /* sign and special values [top 32-bits; last two bits are don't-care + for Infinity on input, last bit don't-care for NaNs] */ + #define DECFLOAT_Sign 0x80000000 /* 1 00000 00 Sign */ + #define DECFLOAT_NaN 0x7c000000 /* 0 11111 00 NaN generic */ + #define DECFLOAT_qNaN 0x7c000000 /* 0 11111 00 qNaN */ + #define DECFLOAT_sNaN 0x7e000000 /* 0 11111 10 sNaN */ + #define DECFLOAT_Inf 0x78000000 /* 0 11110 00 Infinity */ + #define DECFLOAT_MinSp 0x78000000 /* minimum special value */ + /* [specials are all >=MinSp] */ + /* Sign nibble constants */ + #if !defined(DECPPLUSALT) + #define DECPPLUSALT 0x0A /* alternate plus nibble */ + #define DECPMINUSALT 0x0B /* alternate minus nibble */ + #define DECPPLUS 0x0C /* preferred plus nibble */ + #define DECPMINUS 0x0D /* preferred minus nibble */ + #define DECPPLUSALT2 0x0E /* alternate plus nibble */ + #define DECPUNSIGNED 0x0F /* alternate plus nibble (unsigned) */ + #endif + + /* ---------------------------------------------------------------- */ + /* Routines -- implemented as decFloat routines in common files */ + /* ---------------------------------------------------------------- */ + + #include "decQuadSymbols.h" + + /* Utilities and conversions, extractors, etc.) */ + extern decQuad * decQuadFromBCD(decQuad *, int32_t, const uint8_t *, int32_t); + extern decQuad * decQuadFromInt32(decQuad *, int32_t); + extern decQuad * decQuadFromPacked(decQuad *, int32_t, const uint8_t *); + extern decQuad * decQuadFromString(decQuad *, const char *, decContext *); + extern decQuad * decQuadFromUInt32(decQuad *, uint32_t); + extern int32_t decQuadGetCoefficient(const decQuad *, uint8_t *); + extern int32_t decQuadGetExponent(const decQuad *); + extern decQuad * decQuadSetCoefficient(decQuad *, const uint8_t *, int32_t); + extern decQuad * decQuadSetExponent(decQuad *, decContext *, int32_t); + extern void decQuadShow(const decQuad *, const char *); + extern int32_t decQuadToBCD(const decQuad *, int32_t *, uint8_t *); + extern char * decQuadToEngString(const decQuad *, char *); + extern int32_t decQuadToInt32(const decQuad *, decContext *, enum rounding); + extern int32_t decQuadToInt32Exact(const decQuad *, decContext *, enum rounding); + extern int32_t decQuadToPacked(const decQuad *, int32_t *, uint8_t *); + extern char * decQuadToString(const decQuad *, char *); + extern uint32_t decQuadToUInt32(const decQuad *, decContext *, enum rounding); + extern uint32_t decQuadToUInt32Exact(const decQuad *, decContext *, enum rounding); + extern decQuad * decQuadZero(decQuad *); + + /* Computational (result is a decQuad) */ + extern decQuad * decQuadAbs(decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadAdd(decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadAnd(decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadDivide(decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadDivideInteger(decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadFMA(decQuad *, const decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadInvert(decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadLogB(decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadMax(decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadMaxMag(decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadMin(decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadMinMag(decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadMinus(decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadMultiply(decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadNextMinus(decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadNextPlus(decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadNextToward(decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadOr(decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadPlus(decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadQuantize(decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadReduce(decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadRemainder(decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadRemainderNear(decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadRotate(decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadScaleB(decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadShift(decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadSubtract(decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadToIntegralValue(decQuad *, const decQuad *, decContext *, enum rounding); + extern decQuad * decQuadToIntegralExact(decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadXor(decQuad *, const decQuad *, const decQuad *, decContext *); + + /* Comparisons */ + extern decQuad * decQuadCompare(decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadCompareSignal(decQuad *, const decQuad *, const decQuad *, decContext *); + extern decQuad * decQuadCompareTotal(decQuad *, const decQuad *, const decQuad *); + extern decQuad * decQuadCompareTotalMag(decQuad *, const decQuad *, const decQuad *); + + /* Copies */ + extern decQuad * decQuadCanonical(decQuad *, const decQuad *); + extern decQuad * decQuadCopy(decQuad *, const decQuad *); + extern decQuad * decQuadCopyAbs(decQuad *, const decQuad *); + extern decQuad * decQuadCopyNegate(decQuad *, const decQuad *); + extern decQuad * decQuadCopySign(decQuad *, const decQuad *, const decQuad *); + + /* Non-computational */ + extern enum decClass decQuadClass(const decQuad *); + extern const char * decQuadClassString(const decQuad *); + extern uint32_t decQuadDigits(const decQuad *); + extern uint32_t decQuadIsCanonical(const decQuad *); + extern uint32_t decQuadIsFinite(const decQuad *); + extern uint32_t decQuadIsInteger(const decQuad *); + extern uint32_t decQuadIsInfinite(const decQuad *); + extern uint32_t decQuadIsNaN(const decQuad *); + extern uint32_t decQuadIsNormal(const decQuad *); + extern uint32_t decQuadIsSignaling(const decQuad *); + extern uint32_t decQuadIsSignalling(const decQuad *); + extern uint32_t decQuadIsSigned(const decQuad *); + extern uint32_t decQuadIsSubnormal(const decQuad *); + extern uint32_t decQuadIsZero(const decQuad *); + extern uint32_t decQuadRadix(const decQuad *); + extern uint32_t decQuadSameQuantum(const decQuad *, const decQuad *); + extern const char * decQuadVersion(void); + + /* decNumber conversions; these are implemented as macros so as not */ + /* to force a dependency on decimal128 and decNumber in decQuad. */ + #define decQuadToNumber(dq, dn) decimal128ToNumber((decimal128 *)(dq), dn) + #define decQuadFromNumber(dq, dn, set) (decQuad *)decimal128FromNumber((decimal128 *)(dq), dn, set) + +#endif diff --git a/libdecnumber/decQuadSymbols.h b/libdecnumber/decQuadSymbols.h new file mode 100644 index 0000000..5f614d4 --- /dev/null +++ b/libdecnumber/decQuadSymbols.h @@ -0,0 +1,82 @@ +#if !defined(DECQUADSYMBOLS) +#define DECQUADSYMBOLS + +#ifdef IN_LIBGCC2 +#define decQuadAbs __decQuadAbs +#define decQuadAdd __decQuadAdd +#define decQuadAnd __decQuadAnd +#define decQuadCanonical __decQuadCanonical +#define decQuadClass __decQuadClass +#define decQuadClassString __decQuadClassString +#define decQuadCompare __decQuadCompare +#define decQuadCompareSignal __decQuadCompareSignal +#define decQuadCompareTotal __decQuadCompareTotal +#define decQuadCompareTotalMag __decQuadCompareTotalMag +#define decQuadCopy __decQuadCopy +#define decQuadCopyAbs __decQuadCopyAbs +#define decQuadCopyNegate __decQuadCopyNegate +#define decQuadCopySign __decQuadCopySign +#define decQuadDigits __decQuadDigits +#define decQuadDivide __decQuadDivide +#define decQuadDivideInteger __decQuadDivideInteger +#define decQuadFMA __decQuadFMA +#define decQuadFromBCD __decQuadFromBCD +#define decQuadFromInt32 __decQuadFromInt32 +#define decQuadFromPacked __decQuadFromPacked +#define decQuadFromString __decQuadFromString +#define decQuadFromUInt32 __decQuadFromUInt32 +#define decQuadGetCoefficient __decQuadGetCoefficient +#define decQuadGetExponent __decQuadGetExponent +#define decQuadInvert __decQuadInvert +#define decQuadIsCanonical __decQuadIsCanonical +#define decQuadIsFinite __decQuadIsFinite +#define decQuadIsInfinite __decQuadIsInfinite +#define decQuadIsInteger __decQuadIsInteger +#define decQuadIsNaN __decQuadIsNaN +#define decQuadIsNormal __decQuadIsNormal +#define decQuadIsSignaling __decQuadIsSignaling +#define decQuadIsSignalling __decQuadIsSignalling +#define decQuadIsSigned __decQuadIsSigned +#define decQuadIsSubnormal __decQuadIsSubnormal +#define decQuadIsZero __decQuadIsZero +#define decQuadLogB __decQuadLogB +#define decQuadMax __decQuadMax +#define decQuadMaxMag __decQuadMaxMag +#define decQuadMin __decQuadMin +#define decQuadMinMag __decQuadMinMag +#define decQuadMinus __decQuadMinus +#define decQuadMultiply __decQuadMultiply +#define decQuadNextMinus __decQuadNextMinus +#define decQuadNextPlus __decQuadNextPlus +#define decQuadNextToward __decQuadNextToward +#define decQuadOr __decQuadOr +#define decQuadPlus __decQuadPlus +#define decQuadQuantize __decQuadQuantize +#define decQuadRadix __decQuadRadix +#define decQuadReduce __decQuadReduce +#define decQuadRemainder __decQuadRemainder +#define decQuadRemainderNear __decQuadRemainderNear +#define decQuadRotate __decQuadRotate +#define decQuadSameQuantum __decQuadSameQuantum +#define decQuadScaleB __decQuadScaleB +#define decQuadSetCoefficient __decQuadSetCoefficient +#define decQuadSetExponent __decQuadSetExponent +#define decQuadShift __decQuadShift +#define decQuadShow __decQuadShow +#define decQuadSubtract __decQuadSubtract +#define decQuadToBCD __decQuadToBCD +#define decQuadToEngString __decQuadToEngString +#define decQuadToInt32 __decQuadToInt32 +#define decQuadToInt32Exact __decQuadToInt32Exact +#define decQuadToIntegralExact __decQuadToIntegralExact +#define decQuadToIntegralValue __decQuadToIntegralValue +#define decQuadToPacked __decQuadToPacked +#define decQuadToString __decQuadToString +#define decQuadToUInt32 __decQuadToUInt32 +#define decQuadToUInt32Exact __decQuadToUInt32Exact +#define decQuadVersion __decQuadVersion +#define decQuadXor __decQuadXor +#define decQuadZero __decQuadZero +#endif + +#endif diff --git a/libdecnumber/decRound.c b/libdecnumber/decRound.c new file mode 100644 index 0000000..6e51eb6 --- /dev/null +++ b/libdecnumber/decRound.c @@ -0,0 +1,102 @@ +/* Internal testing support for rounding for decimal float. + + Copyright (C) 2005, 2006 Free Software Foundation, Inc. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it + under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public + License for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +#include "config.h" +#include "decContext.h" +#include "decRound.h" + +/* Internal, non-documented functions for testing libgcc functions. + This support is not sufficient for application use. */ + +#define FE_DEC_DOWNWARD 0 +#define FE_DEC_TONEAREST 1 +#define FE_DEC_TONEARESTFROMZERO 2 +#define FE_DEC_TOWARDZERO 3 +#define FE_DEC_UPWARD 4 +#define FE_DEC_MAX 5 + +static enum rounding __dfp_rounding_mode = DEC_ROUND_HALF_EVEN; + +/* Set the decNumber rounding mode from the FE_DEC_* value in MODE. */ + +void +__dfp_set_round (int mode) +{ + switch (mode) + { + case FE_DEC_DOWNWARD: + __dfp_rounding_mode = DEC_ROUND_FLOOR; break; + case FE_DEC_TONEAREST: + __dfp_rounding_mode = DEC_ROUND_HALF_EVEN; break; + case FE_DEC_TONEARESTFROMZERO: + __dfp_rounding_mode = DEC_ROUND_HALF_UP; break; + case FE_DEC_TOWARDZERO: + __dfp_rounding_mode = DEC_ROUND_DOWN; break; + case FE_DEC_UPWARD: + __dfp_rounding_mode = DEC_ROUND_CEILING; break; + default: + /* We can't use assert in libgcc, so just return the default mode. */ + __dfp_rounding_mode = DEC_ROUND_HALF_EVEN; break; + } +} + +/* Return the decNumber rounding mode as an FE_DEC_* value. */ + +int +__dfp_get_round (void) +{ + int mode; + + switch (__dfp_rounding_mode) + { + case DEC_ROUND_FLOOR: + mode = FE_DEC_DOWNWARD; break; + case DEC_ROUND_HALF_EVEN: + mode = FE_DEC_TONEAREST; break; + case DEC_ROUND_HALF_UP: + mode = FE_DEC_TONEARESTFROMZERO; break; + case DEC_ROUND_DOWN: + mode = FE_DEC_TOWARDZERO; break; + case DEC_ROUND_CEILING: + mode = FE_DEC_UPWARD; break; + default: + /* We shouldn't get here, but can't use assert in libgcc. */ + mode = -1; + } + return mode; +} + +/* Return the decNumber version of the current rounding mode. */ + +enum rounding +__decGetRound (void) +{ + return __dfp_rounding_mode; +} diff --git a/libdecnumber/decRound.h b/libdecnumber/decRound.h new file mode 100644 index 0000000..5d2781e --- /dev/null +++ b/libdecnumber/decRound.h @@ -0,0 +1,37 @@ +/* Internal testing support for rounding for decimal float. + + Copyright (C) 2006 Free Software Foundation, Inc. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it + under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public + License for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +#include "decContext.h" + +#define DFP_INIT_ROUNDMODE(A) A = __decGetRound() + +extern void __dfp_set_round (int); +extern int __dfp_get_round (void); +extern enum rounding __decGetRound (void); diff --git a/libdecnumber/decSingle.c b/libdecnumber/decSingle.c new file mode 100644 index 0000000..1123959 --- /dev/null +++ b/libdecnumber/decSingle.c @@ -0,0 +1,85 @@ +/* decSingle module for the decNumber C Library. + Copyright (C) 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* decSingle.c -- decSingle operations module */ +/* ------------------------------------------------------------------ */ +/* This module comprises decSingle operations (including conversions) */ +/* ------------------------------------------------------------------ */ + +#include "decContext.h" /* public includes */ +#include "decSingle.h" /* public includes */ + +/* Constant mappings for shared code */ +#define DECPMAX DECSINGLE_Pmax +#define DECEMIN DECSINGLE_Emin +#define DECEMAX DECSINGLE_Emax +#define DECEMAXD DECSINGLE_EmaxD +#define DECBYTES DECSINGLE_Bytes +#define DECSTRING DECSINGLE_String +#define DECECONL DECSINGLE_EconL +#define DECBIAS DECSINGLE_Bias +#define DECLETS DECSINGLE_Declets +#define DECQTINY (-DECSINGLE_Bias) +/* parameters of next-wider format */ +#define DECWBYTES DECDOUBLE_Bytes +#define DECWPMAX DECDOUBLE_Pmax +#define DECWECONL DECDOUBLE_EconL +#define DECWBIAS DECDOUBLE_Bias + +/* Type and function mappings for shared code */ +#define decFloat decSingle /* Type name */ +#define decFloatWider decDouble /* Type name */ + +/* Utility (binary results, extractors, etc.) */ +#define decFloatFromBCD decSingleFromBCD +#define decFloatFromPacked decSingleFromPacked +#define decFloatFromString decSingleFromString +#define decFloatFromWider decSingleFromWider +#define decFloatGetCoefficient decSingleGetCoefficient +#define decFloatGetExponent decSingleGetExponent +#define decFloatSetCoefficient decSingleSetCoefficient +#define decFloatSetExponent decSingleSetExponent +#define decFloatShow decSingleShow +#define decFloatToBCD decSingleToBCD +#define decFloatToEngString decSingleToEngString +#define decFloatToPacked decSingleToPacked +#define decFloatToString decSingleToString +#define decFloatToWider decSingleToWider +#define decFloatZero decSingleZero + +/* Non-computational */ +#define decFloatRadix decSingleRadix +#define decFloatVersion decSingleVersion + +#include "decNumberLocal.h" /* local includes (need DECPMAX) */ +#include "decCommon.c" /* non-basic decFloat routines */ +/* [Do not include decBasic.c for decimal32] */ + diff --git a/libdecnumber/decSingle.h b/libdecnumber/decSingle.h new file mode 100644 index 0000000..8dd1bd3 --- /dev/null +++ b/libdecnumber/decSingle.h @@ -0,0 +1,101 @@ +/* decSingle module header for the decNumber C Library. + Copyright (C) 2005 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* decSingle.h -- Decimal 32-bit format module header */ +/* ------------------------------------------------------------------ */ +/* Please see decFloats.h for an overview and documentation details. */ +/* ------------------------------------------------------------------ */ + +#if !defined(DECSINGLE) + #define DECSINGLE + + #define DECSINGLENAME "decSingle" /* Short name */ + #define DECSINGLETITLE "Decimal 32-bit datum" /* Verbose name */ + #define DECSINGLEAUTHOR "Mike Cowlishaw" /* Who to blame */ + + /* parameters for decSingles */ + #define DECSINGLE_Bytes 4 /* length */ + #define DECSINGLE_Pmax 7 /* maximum precision (digits) */ + #define DECSINGLE_Emin -95 /* minimum adjusted exponent */ + #define DECSINGLE_Emax 96 /* maximum adjusted exponent */ + #define DECSINGLE_EmaxD 3 /* maximum exponent digits */ + #define DECSINGLE_Bias 101 /* bias for the exponent */ + #define DECSINGLE_String 16 /* maximum string length, +1 */ + #define DECSINGLE_EconL 6 /* exponent continuation length */ + #define DECSINGLE_Declets 2 /* count of declets */ + /* highest biased exponent (Elimit-1) */ + #define DECSINGLE_Ehigh (DECSINGLE_Emax + DECSINGLE_Bias - (DECSINGLE_Pmax-1)) + + /* Required includes */ + #include "decContext.h" + #include "decQuad.h" + #include "decDouble.h" + + /* The decSingle decimal 32-bit type, accessible by bytes */ + typedef struct { + uint8_t bytes[DECSINGLE_Bytes]; /* fields: 1, 5, 6, 20 bits */ + } decSingle; + + /* ---------------------------------------------------------------- */ + /* Routines -- implemented as decFloat routines in common files */ + /* ---------------------------------------------------------------- */ + + #include "decSingleSymbols.h" + + /* Utilities (binary argument(s) or result, extractors, etc.) */ + extern decSingle * decSingleFromBCD(decSingle *, int32_t, const uint8_t *, int32_t); + extern decSingle * decSingleFromPacked(decSingle *, int32_t, const uint8_t *); + extern decSingle * decSingleFromString(decSingle *, const char *, decContext *); + extern decSingle * decSingleFromWider(decSingle *, const decDouble *, decContext *); + extern int32_t decSingleGetCoefficient(const decSingle *, uint8_t *); + extern int32_t decSingleGetExponent(const decSingle *); + extern decSingle * decSingleSetCoefficient(decSingle *, const uint8_t *, int32_t); + extern decSingle * decSingleSetExponent(decSingle *, decContext *, int32_t); + extern void decSingleShow(const decSingle *, const char *); + extern int32_t decSingleToBCD(const decSingle *, int32_t *, uint8_t *); + extern char * decSingleToEngString(const decSingle *, char *); + extern int32_t decSingleToPacked(const decSingle *, int32_t *, uint8_t *); + extern char * decSingleToString(const decSingle *, char *); + extern decDouble * decSingleToWider(const decSingle *, decDouble *); + extern decSingle * decSingleZero(decSingle *); + + /* (No Arithmetic routines for decSingle) */ + + /* Non-computational */ + extern uint32_t decSingleRadix(const decSingle *); + extern const char * decSingleVersion(void); + + /* decNumber conversions; these are implemented as macros so as not */ + /* to force a dependency on decimal32 and decNumber in decSingle. */ + #define decSingleToNumber(dq, dn) decimal32ToNumber((decimal32 *)(dq), dn) + #define decSingleFromNumber(dq, dn, set) (decSingle *)decimal32FromNumber((decimal32 *)(dq), dn, set) + +#endif diff --git a/libdecnumber/decSingleSymbols.h b/libdecnumber/decSingleSymbols.h new file mode 100644 index 0000000..6eee0e5 --- /dev/null +++ b/libdecnumber/decSingleSymbols.h @@ -0,0 +1,24 @@ +#if !defined(DECSINGLESYMBOLS) +#define DECSINGLESYMBOLS + +#ifdef IN_LIBGCC2 +#define decSingleFromBCD __decSingleFromBCD +#define decSingleFromPacked __decSingleFromPacked +#define decSingleFromString __decSingleFromString +#define decSingleFromWider __decSingleFromWider +#define decSingleGetCoefficient __decSingleGetCoefficient +#define decSingleGetExponent __decSingleGetExponent +#define decSingleRadix __decSingleRadix +#define decSingleSetCoefficient __decSingleSetCoefficient +#define decSingleSetExponent __decSingleSetExponent +#define decSingleShow __decSingleShow +#define decSingleToBCD __decSingleToBCD +#define decSingleToEngString __decSingleToEngString +#define decSingleToPacked __decSingleToPacked +#define decSingleToString __decSingleToString +#define decSingleToWider __decSingleToWider +#define decSingleVersion __decSingleVersion +#define decSingleZero __decSingleZero +#endif + +#endif diff --git a/libdecnumber/dpd/decimal128.c b/libdecnumber/dpd/decimal128.c new file mode 100644 index 0000000..6aa98b5 --- /dev/null +++ b/libdecnumber/dpd/decimal128.c @@ -0,0 +1,570 @@ +/* Decimal 128-bit format module for the decNumber C Library. + Copyright (C) 2005, 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* Decimal 128-bit format module */ +/* ------------------------------------------------------------------ */ +/* This module comprises the routines for decimal128 format numbers. */ +/* Conversions are supplied to and from decNumber and String. */ +/* */ +/* This is used when decNumber provides operations, either for all */ +/* operations or as a proxy between decNumber and decSingle. */ +/* */ +/* Error handling is the same as decNumber (qv.). */ +/* ------------------------------------------------------------------ */ +#include <string.h> /* [for memset/memcpy] */ +#include <stdio.h> /* [for printf] */ + +#include "config.h" /* GCC definitions */ +#define DECNUMDIGITS 34 /* make decNumbers with space for 34 */ +#include "decNumber.h" /* base number library */ +#include "decNumberLocal.h" /* decNumber local types, etc. */ +#include "decimal128.h" /* our primary include */ + +/* Utility routines and tables [in decimal64.c] */ +/* DPD2BIN and the reverse are renamed to prevent link-time conflict */ +/* if decQuad is also built in the same executable */ +#define DPD2BIN DPD2BINx +#define BIN2DPD BIN2DPDx +extern const uInt COMBEXP[32], COMBMSD[32]; +extern const uShort DPD2BIN[1024]; +extern const uShort BIN2DPD[1000]; /* [not used] */ +extern const uByte BIN2CHAR[4001]; + +extern void decDigitsFromDPD(decNumber *, const uInt *, Int); +extern void decDigitsToDPD(const decNumber *, uInt *, Int); + +#if DECTRACE || DECCHECK +void decimal128Show(const decimal128 *); /* for debug */ +extern void decNumberShow(const decNumber *); /* .. */ +#endif + +/* Useful macro */ +/* Clear a structure (e.g., a decNumber) */ +#define DEC_clear(d) memset(d, 0, sizeof(*d)) + +/* ------------------------------------------------------------------ */ +/* decimal128FromNumber -- convert decNumber to decimal128 */ +/* */ +/* ds is the target decimal128 */ +/* dn is the source number (assumed valid) */ +/* set is the context, used only for reporting errors */ +/* */ +/* The set argument is used only for status reporting and for the */ +/* rounding mode (used if the coefficient is more than DECIMAL128_Pmax*/ +/* digits or an overflow is detected). If the exponent is out of the */ +/* valid range then Overflow or Underflow will be raised. */ +/* After Underflow a subnormal result is possible. */ +/* */ +/* DEC_Clamped is set if the number has to be 'folded down' to fit, */ +/* by reducing its exponent and multiplying the coefficient by a */ +/* power of ten, or if the exponent on a zero had to be clamped. */ +/* ------------------------------------------------------------------ */ +decimal128 * decimal128FromNumber(decimal128 *d128, const decNumber *dn, + decContext *set) { + uInt status=0; /* status accumulator */ + Int ae; /* adjusted exponent */ + decNumber dw; /* work */ + decContext dc; /* .. */ + uInt *pu; /* .. */ + uInt comb, exp; /* .. */ + uInt targar[4]={0,0,0,0}; /* target 128-bit */ + #define targhi targar[3] /* name the word with the sign */ + #define targmh targar[2] /* name the words */ + #define targml targar[1] /* .. */ + #define targlo targar[0] /* .. */ + + /* If the number has too many digits, or the exponent could be */ + /* out of range then reduce the number under the appropriate */ + /* constraints. This could push the number to Infinity or zero, */ + /* so this check and rounding must be done before generating the */ + /* decimal128] */ + ae=dn->exponent+dn->digits-1; /* [0 if special] */ + if (dn->digits>DECIMAL128_Pmax /* too many digits */ + || ae>DECIMAL128_Emax /* likely overflow */ + || ae<DECIMAL128_Emin) { /* likely underflow */ + decContextDefault(&dc, DEC_INIT_DECIMAL128); /* [no traps] */ + dc.round=set->round; /* use supplied rounding */ + decNumberPlus(&dw, dn, &dc); /* (round and check) */ + /* [this changes -0 to 0, so enforce the sign...] */ + dw.bits|=dn->bits&DECNEG; + status=dc.status; /* save status */ + dn=&dw; /* use the work number */ + } /* maybe out of range */ + + if (dn->bits&DECSPECIAL) { /* a special value */ + if (dn->bits&DECINF) targhi=DECIMAL_Inf<<24; + else { /* sNaN or qNaN */ + if ((*dn->lsu!=0 || dn->digits>1) /* non-zero coefficient */ + && (dn->digits<DECIMAL128_Pmax)) { /* coefficient fits */ + decDigitsToDPD(dn, targar, 0); + } + if (dn->bits&DECNAN) targhi|=DECIMAL_NaN<<24; + else targhi|=DECIMAL_sNaN<<24; + } /* a NaN */ + } /* special */ + + else { /* is finite */ + if (decNumberIsZero(dn)) { /* is a zero */ + /* set and clamp exponent */ + if (dn->exponent<-DECIMAL128_Bias) { + exp=0; /* low clamp */ + status|=DEC_Clamped; + } + else { + exp=dn->exponent+DECIMAL128_Bias; /* bias exponent */ + if (exp>DECIMAL128_Ehigh) { /* top clamp */ + exp=DECIMAL128_Ehigh; + status|=DEC_Clamped; + } + } + comb=(exp>>9) & 0x18; /* msd=0, exp top 2 bits .. */ + } + else { /* non-zero finite number */ + uInt msd; /* work */ + Int pad=0; /* coefficient pad digits */ + + /* the dn is known to fit, but it may need to be padded */ + exp=(uInt)(dn->exponent+DECIMAL128_Bias); /* bias exponent */ + if (exp>DECIMAL128_Ehigh) { /* fold-down case */ + pad=exp-DECIMAL128_Ehigh; + exp=DECIMAL128_Ehigh; /* [to maximum] */ + status|=DEC_Clamped; + } + + /* [fastpath for common case is not a win, here] */ + decDigitsToDPD(dn, targar, pad); + /* save and clear the top digit */ + msd=targhi>>14; + targhi&=0x00003fff; + + /* create the combination field */ + if (msd>=8) comb=0x18 | ((exp>>11) & 0x06) | (msd & 0x01); + else comb=((exp>>9) & 0x18) | msd; + } + targhi|=comb<<26; /* add combination field .. */ + targhi|=(exp&0xfff)<<14; /* .. and exponent continuation */ + } /* finite */ + + if (dn->bits&DECNEG) targhi|=0x80000000; /* add sign bit */ + + /* now write to storage; this is endian */ + pu=(uInt *)d128->bytes; /* overlay */ + if (DECLITEND) { + pu[0]=targlo; /* directly store the low int */ + pu[1]=targml; /* then the mid-low */ + pu[2]=targmh; /* then the mid-high */ + pu[3]=targhi; /* then the high int */ + } + else { + pu[0]=targhi; /* directly store the high int */ + pu[1]=targmh; /* then the mid-high */ + pu[2]=targml; /* then the mid-low */ + pu[3]=targlo; /* then the low int */ + } + + if (status!=0) decContextSetStatus(set, status); /* pass on status */ + /* decimal128Show(d128); */ + return d128; + } /* decimal128FromNumber */ + +/* ------------------------------------------------------------------ */ +/* decimal128ToNumber -- convert decimal128 to decNumber */ +/* d128 is the source decimal128 */ +/* dn is the target number, with appropriate space */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +decNumber * decimal128ToNumber(const decimal128 *d128, decNumber *dn) { + uInt msd; /* coefficient MSD */ + uInt exp; /* exponent top two bits */ + uInt comb; /* combination field */ + const uInt *pu; /* work */ + Int need; /* .. */ + uInt sourar[4]; /* source 128-bit */ + #define sourhi sourar[3] /* name the word with the sign */ + #define sourmh sourar[2] /* and the mid-high word */ + #define sourml sourar[1] /* and the mod-low word */ + #define sourlo sourar[0] /* and the lowest word */ + + /* load source from storage; this is endian */ + pu=(const uInt *)d128->bytes; /* overlay */ + if (DECLITEND) { + sourlo=pu[0]; /* directly load the low int */ + sourml=pu[1]; /* then the mid-low */ + sourmh=pu[2]; /* then the mid-high */ + sourhi=pu[3]; /* then the high int */ + } + else { + sourhi=pu[0]; /* directly load the high int */ + sourmh=pu[1]; /* then the mid-high */ + sourml=pu[2]; /* then the mid-low */ + sourlo=pu[3]; /* then the low int */ + } + + comb=(sourhi>>26)&0x1f; /* combination field */ + + decNumberZero(dn); /* clean number */ + if (sourhi&0x80000000) dn->bits=DECNEG; /* set sign if negative */ + + msd=COMBMSD[comb]; /* decode the combination field */ + exp=COMBEXP[comb]; /* .. */ + + if (exp==3) { /* is a special */ + if (msd==0) { + dn->bits|=DECINF; + return dn; /* no coefficient needed */ + } + else if (sourhi&0x02000000) dn->bits|=DECSNAN; + else dn->bits|=DECNAN; + msd=0; /* no top digit */ + } + else { /* is a finite number */ + dn->exponent=(exp<<12)+((sourhi>>14)&0xfff)-DECIMAL128_Bias; /* unbiased */ + } + + /* get the coefficient */ + sourhi&=0x00003fff; /* clean coefficient continuation */ + if (msd) { /* non-zero msd */ + sourhi|=msd<<14; /* prefix to coefficient */ + need=12; /* process 12 declets */ + } + else { /* msd=0 */ + if (sourhi) need=11; /* declets to process */ + else if (sourmh) need=10; + else if (sourml) need=7; + else if (sourlo) need=4; + else return dn; /* easy: coefficient is 0 */ + } /*msd=0 */ + + decDigitsFromDPD(dn, sourar, need); /* process declets */ + /* decNumberShow(dn); */ + return dn; + } /* decimal128ToNumber */ + +/* ------------------------------------------------------------------ */ +/* to-scientific-string -- conversion to numeric string */ +/* to-engineering-string -- conversion to numeric string */ +/* */ +/* decimal128ToString(d128, string); */ +/* decimal128ToEngString(d128, string); */ +/* */ +/* d128 is the decimal128 format number to convert */ +/* string is the string where the result will be laid out */ +/* */ +/* string must be at least 24 characters */ +/* */ +/* No error is possible, and no status can be set. */ +/* ------------------------------------------------------------------ */ +char * decimal128ToEngString(const decimal128 *d128, char *string){ + decNumber dn; /* work */ + decimal128ToNumber(d128, &dn); + decNumberToEngString(&dn, string); + return string; + } /* decimal128ToEngString */ + +char * decimal128ToString(const decimal128 *d128, char *string){ + uInt msd; /* coefficient MSD */ + Int exp; /* exponent top two bits or full */ + uInt comb; /* combination field */ + char *cstart; /* coefficient start */ + char *c; /* output pointer in string */ + const uInt *pu; /* work */ + char *s, *t; /* .. (source, target) */ + Int dpd; /* .. */ + Int pre, e; /* .. */ + const uByte *u; /* .. */ + + uInt sourar[4]; /* source 128-bit */ + #define sourhi sourar[3] /* name the word with the sign */ + #define sourmh sourar[2] /* and the mid-high word */ + #define sourml sourar[1] /* and the mod-low word */ + #define sourlo sourar[0] /* and the lowest word */ + + /* load source from storage; this is endian */ + pu=(const uInt *)d128->bytes; /* overlay */ + if (DECLITEND) { + sourlo=pu[0]; /* directly load the low int */ + sourml=pu[1]; /* then the mid-low */ + sourmh=pu[2]; /* then the mid-high */ + sourhi=pu[3]; /* then the high int */ + } + else { + sourhi=pu[0]; /* directly load the high int */ + sourmh=pu[1]; /* then the mid-high */ + sourml=pu[2]; /* then the mid-low */ + sourlo=pu[3]; /* then the low int */ + } + + c=string; /* where result will go */ + if (((Int)sourhi)<0) *c++='-'; /* handle sign */ + + comb=(sourhi>>26)&0x1f; /* combination field */ + msd=COMBMSD[comb]; /* decode the combination field */ + exp=COMBEXP[comb]; /* .. */ + + if (exp==3) { + if (msd==0) { /* infinity */ + strcpy(c, "Inf"); + strcpy(c+3, "inity"); + return string; /* easy */ + } + if (sourhi&0x02000000) *c++='s'; /* sNaN */ + strcpy(c, "NaN"); /* complete word */ + c+=3; /* step past */ + if (sourlo==0 && sourml==0 && sourmh==0 + && (sourhi&0x0003ffff)==0) return string; /* zero payload */ + /* otherwise drop through to add integer; set correct exp */ + exp=0; msd=0; /* setup for following code */ + } + else exp=(exp<<12)+((sourhi>>14)&0xfff)-DECIMAL128_Bias; /* unbiased */ + + /* convert 34 digits of significand to characters */ + cstart=c; /* save start of coefficient */ + if (msd) *c++='0'+(char)msd; /* non-zero most significant digit */ + + /* Now decode the declets. After extracting each one, it is */ + /* decoded to binary and then to a 4-char sequence by table lookup; */ + /* the 4-chars are a 1-char length (significant digits, except 000 */ + /* has length 0). This allows us to left-align the first declet */ + /* with non-zero content, then remaining ones are full 3-char */ + /* length. We use fixed-length memcpys because variable-length */ + /* causes a subroutine call in GCC. (These are length 4 for speed */ + /* and are safe because the array has an extra terminator byte.) */ + #define dpd2char u=&BIN2CHAR[DPD2BIN[dpd]*4]; \ + if (c!=cstart) {memcpy(c, u+1, 4); c+=3;} \ + else if (*u) {memcpy(c, u+4-*u, 4); c+=*u;} + dpd=(sourhi>>4)&0x3ff; /* declet 1 */ + dpd2char; + dpd=((sourhi&0xf)<<6) | (sourmh>>26); /* declet 2 */ + dpd2char; + dpd=(sourmh>>16)&0x3ff; /* declet 3 */ + dpd2char; + dpd=(sourmh>>6)&0x3ff; /* declet 4 */ + dpd2char; + dpd=((sourmh&0x3f)<<4) | (sourml>>28); /* declet 5 */ + dpd2char; + dpd=(sourml>>18)&0x3ff; /* declet 6 */ + dpd2char; + dpd=(sourml>>8)&0x3ff; /* declet 7 */ + dpd2char; + dpd=((sourml&0xff)<<2) | (sourlo>>30); /* declet 8 */ + dpd2char; + dpd=(sourlo>>20)&0x3ff; /* declet 9 */ + dpd2char; + dpd=(sourlo>>10)&0x3ff; /* declet 10 */ + dpd2char; + dpd=(sourlo)&0x3ff; /* declet 11 */ + dpd2char; + + if (c==cstart) *c++='0'; /* all zeros -- make 0 */ + + if (exp==0) { /* integer or NaN case -- easy */ + *c='\0'; /* terminate */ + return string; + } + + /* non-0 exponent */ + e=0; /* assume no E */ + pre=c-cstart+exp; + /* [here, pre-exp is the digits count (==1 for zero)] */ + if (exp>0 || pre<-5) { /* need exponential form */ + e=pre-1; /* calculate E value */ + pre=1; /* assume one digit before '.' */ + } /* exponential form */ + + /* modify the coefficient, adding 0s, '.', and E+nn as needed */ + s=c-1; /* source (LSD) */ + if (pre>0) { /* ddd.ddd (plain), perhaps with E */ + char *dotat=cstart+pre; + if (dotat<c) { /* if embedded dot needed... */ + t=c; /* target */ + for (; s>=dotat; s--, t--) *t=*s; /* open the gap; leave t at gap */ + *t='.'; /* insert the dot */ + c++; /* length increased by one */ + } + + /* finally add the E-part, if needed; it will never be 0, and has */ + /* a maximum length of 4 digits */ + if (e!=0) { + *c++='E'; /* starts with E */ + *c++='+'; /* assume positive */ + if (e<0) { + *(c-1)='-'; /* oops, need '-' */ + e=-e; /* uInt, please */ + } + if (e<1000) { /* 3 (or fewer) digits case */ + u=&BIN2CHAR[e*4]; /* -> length byte */ + memcpy(c, u+4-*u, 4); /* copy fixed 4 characters [is safe] */ + c+=*u; /* bump pointer appropriately */ + } + else { /* 4-digits */ + Int thou=((e>>3)*1049)>>17; /* e/1000 */ + Int rem=e-(1000*thou); /* e%1000 */ + *c++='0'+(char)thou; + u=&BIN2CHAR[rem*4]; /* -> length byte */ + memcpy(c, u+1, 4); /* copy fixed 3+1 characters [is safe] */ + c+=3; /* bump pointer, always 3 digits */ + } + } + *c='\0'; /* add terminator */ + /*printf("res %s\n", string); */ + return string; + } /* pre>0 */ + + /* -5<=pre<=0: here for plain 0.ddd or 0.000ddd forms (can never have E) */ + t=c+1-pre; + *(t+1)='\0'; /* can add terminator now */ + for (; s>=cstart; s--, t--) *t=*s; /* shift whole coefficient right */ + c=cstart; + *c++='0'; /* always starts with 0. */ + *c++='.'; + for (; pre<0; pre++) *c++='0'; /* add any 0's after '.' */ + /*printf("res %s\n", string); */ + return string; + } /* decimal128ToString */ + +/* ------------------------------------------------------------------ */ +/* to-number -- conversion from numeric string */ +/* */ +/* decimal128FromString(result, string, set); */ +/* */ +/* result is the decimal128 format number which gets the result of */ +/* the conversion */ +/* *string is the character string which should contain a valid */ +/* number (which may be a special value) */ +/* set is the context */ +/* */ +/* The context is supplied to this routine is used for error handling */ +/* (setting of status and traps) and for the rounding mode, only. */ +/* If an error occurs, the result will be a valid decimal128 NaN. */ +/* ------------------------------------------------------------------ */ +decimal128 * decimal128FromString(decimal128 *result, const char *string, + decContext *set) { + decContext dc; /* work */ + decNumber dn; /* .. */ + + decContextDefault(&dc, DEC_INIT_DECIMAL128); /* no traps, please */ + dc.round=set->round; /* use supplied rounding */ + + decNumberFromString(&dn, string, &dc); /* will round if needed */ + decimal128FromNumber(result, &dn, &dc); + if (dc.status!=0) { /* something happened */ + decContextSetStatus(set, dc.status); /* .. pass it on */ + } + return result; + } /* decimal128FromString */ + +/* ------------------------------------------------------------------ */ +/* decimal128IsCanonical -- test whether encoding is canonical */ +/* d128 is the source decimal128 */ +/* returns 1 if the encoding of d128 is canonical, 0 otherwise */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +uint32_t decimal128IsCanonical(const decimal128 *d128) { + decNumber dn; /* work */ + decimal128 canon; /* .. */ + decContext dc; /* .. */ + decContextDefault(&dc, DEC_INIT_DECIMAL128); + decimal128ToNumber(d128, &dn); + decimal128FromNumber(&canon, &dn, &dc);/* canon will now be canonical */ + return memcmp(d128, &canon, DECIMAL128_Bytes)==0; + } /* decimal128IsCanonical */ + +/* ------------------------------------------------------------------ */ +/* decimal128Canonical -- copy an encoding, ensuring it is canonical */ +/* d128 is the source decimal128 */ +/* result is the target (may be the same decimal128) */ +/* returns result */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +decimal128 * decimal128Canonical(decimal128 *result, const decimal128 *d128) { + decNumber dn; /* work */ + decContext dc; /* .. */ + decContextDefault(&dc, DEC_INIT_DECIMAL128); + decimal128ToNumber(d128, &dn); + decimal128FromNumber(result, &dn, &dc);/* result will now be canonical */ + return result; + } /* decimal128Canonical */ + +#if DECTRACE || DECCHECK +/* Macros for accessing decimal128 fields. These assume the argument + is a reference (pointer) to the decimal128 structure, and the + decimal128 is in network byte order (big-endian) */ +/* Get sign */ +#define decimal128Sign(d) ((unsigned)(d)->bytes[0]>>7) + +/* Get combination field */ +#define decimal128Comb(d) (((d)->bytes[0] & 0x7c)>>2) + +/* Get exponent continuation [does not remove bias] */ +#define decimal128ExpCon(d) ((((d)->bytes[0] & 0x03)<<10) \ + | ((unsigned)(d)->bytes[1]<<2) \ + | ((unsigned)(d)->bytes[2]>>6)) + +/* Set sign [this assumes sign previously 0] */ +#define decimal128SetSign(d, b) { \ + (d)->bytes[0]|=((unsigned)(b)<<7);} + +/* Set exponent continuation [does not apply bias] */ +/* This assumes range has been checked and exponent previously 0; */ +/* type of exponent must be unsigned */ +#define decimal128SetExpCon(d, e) { \ + (d)->bytes[0]|=(uint8_t)((e)>>10); \ + (d)->bytes[1] =(uint8_t)(((e)&0x3fc)>>2); \ + (d)->bytes[2]|=(uint8_t)(((e)&0x03)<<6);} + +/* ------------------------------------------------------------------ */ +/* decimal128Show -- display a decimal128 in hexadecimal [debug aid] */ +/* d128 -- the number to show */ +/* ------------------------------------------------------------------ */ +/* Also shows sign/cob/expconfields extracted */ +void decimal128Show(const decimal128 *d128) { + char buf[DECIMAL128_Bytes*2+1]; + Int i, j=0; + + if (DECLITEND) { + for (i=0; i<DECIMAL128_Bytes; i++, j+=2) { + sprintf(&buf[j], "%02x", d128->bytes[15-i]); + } + printf(" D128> %s [S:%d Cb:%02x Ec:%02x] LittleEndian\n", buf, + d128->bytes[15]>>7, (d128->bytes[15]>>2)&0x1f, + ((d128->bytes[15]&0x3)<<10)|(d128->bytes[14]<<2)| + (d128->bytes[13]>>6)); + } + else { + for (i=0; i<DECIMAL128_Bytes; i++, j+=2) { + sprintf(&buf[j], "%02x", d128->bytes[i]); + } + printf(" D128> %s [S:%d Cb:%02x Ec:%02x] BigEndian\n", buf, + decimal128Sign(d128), decimal128Comb(d128), + decimal128ExpCon(d128)); + } + } /* decimal128Show */ +#endif diff --git a/libdecnumber/dpd/decimal128.h b/libdecnumber/dpd/decimal128.h new file mode 100644 index 0000000..f8f5b5a --- /dev/null +++ b/libdecnumber/dpd/decimal128.h @@ -0,0 +1,101 @@ +/* Decimal 128-bit format module header for the decNumber C Library. + Copyright (C) 2005, 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* Decimal 128-bit format module header */ +/* ------------------------------------------------------------------ */ + +#if !defined(DECIMAL128) + #define DECIMAL128 + #define DEC128NAME "decimal128" /* Short name */ + #define DEC128FULLNAME "Decimal 128-bit Number" /* Verbose name */ + #define DEC128AUTHOR "Mike Cowlishaw" /* Who to blame */ + + /* parameters for decimal128s */ + #define DECIMAL128_Bytes 16 /* length */ + #define DECIMAL128_Pmax 34 /* maximum precision (digits) */ + #define DECIMAL128_Emax 6144 /* maximum adjusted exponent */ + #define DECIMAL128_Emin -6143 /* minimum adjusted exponent */ + #define DECIMAL128_Bias 6176 /* bias for the exponent */ + #define DECIMAL128_String 43 /* maximum string length, +1 */ + #define DECIMAL128_EconL 12 /* exp. continuation length */ + /* highest biased exponent (Elimit-1) */ + #define DECIMAL128_Ehigh (DECIMAL128_Emax+DECIMAL128_Bias-DECIMAL128_Pmax+1) + + /* check enough digits, if pre-defined */ + #if defined(DECNUMDIGITS) + #if (DECNUMDIGITS<DECIMAL128_Pmax) + #error decimal128.h needs pre-defined DECNUMDIGITS>=34 for safe use + #endif + #endif + + #ifndef DECNUMDIGITS + #define DECNUMDIGITS DECIMAL128_Pmax /* size if not already defined*/ + #endif + #ifndef DECNUMBER + #include "decNumber.h" /* context and number library */ + #endif + + /* Decimal 128-bit type, accessible by bytes */ + typedef struct { + uint8_t bytes[DECIMAL128_Bytes]; /* decimal128: 1, 5, 12, 110 bits*/ + } decimal128; + + /* special values [top byte excluding sign bit; last two bits are */ + /* don't-care for Infinity on input, last bit don't-care for NaN] */ + #if !defined(DECIMAL_NaN) + #define DECIMAL_NaN 0x7c /* 0 11111 00 NaN */ + #define DECIMAL_sNaN 0x7e /* 0 11111 10 sNaN */ + #define DECIMAL_Inf 0x78 /* 0 11110 00 Infinity */ + #endif + + #include "decimal128Local.h" + + /* ---------------------------------------------------------------- */ + /* Routines */ + /* ---------------------------------------------------------------- */ + + #include "decimal128Symbols.h" + + /* String conversions */ + decimal128 * decimal128FromString(decimal128 *, const char *, decContext *); + char * decimal128ToString(const decimal128 *, char *); + char * decimal128ToEngString(const decimal128 *, char *); + + /* decNumber conversions */ + decimal128 * decimal128FromNumber(decimal128 *, const decNumber *, + decContext *); + decNumber * decimal128ToNumber(const decimal128 *, decNumber *); + + /* Format-dependent utilities */ + uint32_t decimal128IsCanonical(const decimal128 *); + decimal128 * decimal128Canonical(decimal128 *, const decimal128 *); + +#endif diff --git a/libdecnumber/dpd/decimal128Local.h b/libdecnumber/dpd/decimal128Local.h new file mode 100644 index 0000000..b4130b5 --- /dev/null +++ b/libdecnumber/dpd/decimal128Local.h @@ -0,0 +1,47 @@ +/* Local definitions for use with the decNumber C Library. + Copyright (C) 2007 Free Software Foundation, Inc. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +#if !defined(DECIMAL128LOCAL) + +/* The compiler needs sign manipulation functions for decimal128 which + are not part of the decNumber package. */ + +/* Set sign; this assumes the sign was previously zero. */ +#define decimal128SetSign(d,b) \ + { (d)->bytes[FLOAT_WORDS_BIG_ENDIAN ? 0 : 15] |= ((unsigned) (b) << 7); } + +/* Clear sign. */ +#define decimal128ClearSign(d) \ + { (d)->bytes[FLOAT_WORDS_BIG_ENDIAN ? 0 : 15] &= ~0x80; } + +/* Flip sign. */ +#define decimal128FlipSign(d) \ + { (d)->bytes[FLOAT_WORDS_BIG_ENDIAN ? 0 : 15] ^= 0x80; } + +#endif diff --git a/libdecnumber/dpd/decimal128Symbols.h b/libdecnumber/dpd/decimal128Symbols.h new file mode 100644 index 0000000..da9d76b --- /dev/null +++ b/libdecnumber/dpd/decimal128Symbols.h @@ -0,0 +1,16 @@ +#if !defined(DECIMAL128SYMBOLS) +#define DECIMAL128SYMBOLS + +#ifdef IN_LIBGCC2 +#define decDigitsFromDPD __decDigitsFromDPD +#define decDigitsToDPD __decDigitsToDPD +#define decimal128Canonical __decimal128Canonical +#define decimal128FromNumber __decimal128FromNumber +#define decimal128FromString __decimal128FromString +#define decimal128IsCanonical __decimal128IsCanonical +#define decimal128ToEngString __decimal128ToEngString +#define decimal128ToNumber __decimal128ToNumber +#define decimal128ToString __decimal128ToString +#endif + +#endif diff --git a/libdecnumber/dpd/decimal32.c b/libdecnumber/dpd/decimal32.c new file mode 100644 index 0000000..692c2f7 --- /dev/null +++ b/libdecnumber/dpd/decimal32.c @@ -0,0 +1,495 @@ +/* Decimal 32-bit format module for the decNumber C Library. + Copyright (C) 2005, 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* Decimal 32-bit format module */ +/* ------------------------------------------------------------------ */ +/* This module comprises the routines for decimal32 format numbers. */ +/* Conversions are supplied to and from decNumber and String. */ +/* */ +/* This is used when decNumber provides operations, either for all */ +/* operations or as a proxy between decNumber and decSingle. */ +/* */ +/* Error handling is the same as decNumber (qv.). */ +/* ------------------------------------------------------------------ */ +#include <string.h> /* [for memset/memcpy] */ +#include <stdio.h> /* [for printf] */ + +#include "config.h" /* GCC definitions */ +#define DECNUMDIGITS 7 /* make decNumbers with space for 7 */ +#include "decNumber.h" /* base number library */ +#include "decNumberLocal.h" /* decNumber local types, etc. */ +#include "decimal32.h" /* our primary include */ + +/* Utility tables and routines [in decimal64.c] */ +/* DPD2BIN and the reverse are renamed to prevent link-time conflict */ +/* if decQuad is also built in the same executable */ +#define DPD2BIN DPD2BINx +#define BIN2DPD BIN2DPDx +extern const uInt COMBEXP[32], COMBMSD[32]; +extern const uShort DPD2BIN[1024]; +extern const uShort BIN2DPD[1000]; +extern const uByte BIN2CHAR[4001]; + +extern void decDigitsToDPD(const decNumber *, uInt *, Int); +extern void decDigitsFromDPD(decNumber *, const uInt *, Int); + +#if DECTRACE || DECCHECK +void decimal32Show(const decimal32 *); /* for debug */ +extern void decNumberShow(const decNumber *); /* .. */ +#endif + +/* Useful macro */ +/* Clear a structure (e.g., a decNumber) */ +#define DEC_clear(d) memset(d, 0, sizeof(*d)) + +/* ------------------------------------------------------------------ */ +/* decimal32FromNumber -- convert decNumber to decimal32 */ +/* */ +/* ds is the target decimal32 */ +/* dn is the source number (assumed valid) */ +/* set is the context, used only for reporting errors */ +/* */ +/* The set argument is used only for status reporting and for the */ +/* rounding mode (used if the coefficient is more than DECIMAL32_Pmax */ +/* digits or an overflow is detected). If the exponent is out of the */ +/* valid range then Overflow or Underflow will be raised. */ +/* After Underflow a subnormal result is possible. */ +/* */ +/* DEC_Clamped is set if the number has to be 'folded down' to fit, */ +/* by reducing its exponent and multiplying the coefficient by a */ +/* power of ten, or if the exponent on a zero had to be clamped. */ +/* ------------------------------------------------------------------ */ +decimal32 * decimal32FromNumber(decimal32 *d32, const decNumber *dn, + decContext *set) { + uInt status=0; /* status accumulator */ + Int ae; /* adjusted exponent */ + decNumber dw; /* work */ + decContext dc; /* .. */ + uInt *pu; /* .. */ + uInt comb, exp; /* .. */ + uInt targ=0; /* target 32-bit */ + + /* If the number has too many digits, or the exponent could be */ + /* out of range then reduce the number under the appropriate */ + /* constraints. This could push the number to Infinity or zero, */ + /* so this check and rounding must be done before generating the */ + /* decimal32] */ + ae=dn->exponent+dn->digits-1; /* [0 if special] */ + if (dn->digits>DECIMAL32_Pmax /* too many digits */ + || ae>DECIMAL32_Emax /* likely overflow */ + || ae<DECIMAL32_Emin) { /* likely underflow */ + decContextDefault(&dc, DEC_INIT_DECIMAL32); /* [no traps] */ + dc.round=set->round; /* use supplied rounding */ + decNumberPlus(&dw, dn, &dc); /* (round and check) */ + /* [this changes -0 to 0, so enforce the sign...] */ + dw.bits|=dn->bits&DECNEG; + status=dc.status; /* save status */ + dn=&dw; /* use the work number */ + } /* maybe out of range */ + + if (dn->bits&DECSPECIAL) { /* a special value */ + if (dn->bits&DECINF) targ=DECIMAL_Inf<<24; + else { /* sNaN or qNaN */ + if ((*dn->lsu!=0 || dn->digits>1) /* non-zero coefficient */ + && (dn->digits<DECIMAL32_Pmax)) { /* coefficient fits */ + decDigitsToDPD(dn, &targ, 0); + } + if (dn->bits&DECNAN) targ|=DECIMAL_NaN<<24; + else targ|=DECIMAL_sNaN<<24; + } /* a NaN */ + } /* special */ + + else { /* is finite */ + if (decNumberIsZero(dn)) { /* is a zero */ + /* set and clamp exponent */ + if (dn->exponent<-DECIMAL32_Bias) { + exp=0; /* low clamp */ + status|=DEC_Clamped; + } + else { + exp=dn->exponent+DECIMAL32_Bias; /* bias exponent */ + if (exp>DECIMAL32_Ehigh) { /* top clamp */ + exp=DECIMAL32_Ehigh; + status|=DEC_Clamped; + } + } + comb=(exp>>3) & 0x18; /* msd=0, exp top 2 bits .. */ + } + else { /* non-zero finite number */ + uInt msd; /* work */ + Int pad=0; /* coefficient pad digits */ + + /* the dn is known to fit, but it may need to be padded */ + exp=(uInt)(dn->exponent+DECIMAL32_Bias); /* bias exponent */ + if (exp>DECIMAL32_Ehigh) { /* fold-down case */ + pad=exp-DECIMAL32_Ehigh; + exp=DECIMAL32_Ehigh; /* [to maximum] */ + status|=DEC_Clamped; + } + + /* fastpath common case */ + if (DECDPUN==3 && pad==0) { + targ=BIN2DPD[dn->lsu[0]]; + if (dn->digits>3) targ|=(uInt)(BIN2DPD[dn->lsu[1]])<<10; + msd=(dn->digits==7 ? dn->lsu[2] : 0); + } + else { /* general case */ + decDigitsToDPD(dn, &targ, pad); + /* save and clear the top digit */ + msd=targ>>20; + targ&=0x000fffff; + } + + /* create the combination field */ + if (msd>=8) comb=0x18 | ((exp>>5) & 0x06) | (msd & 0x01); + else comb=((exp>>3) & 0x18) | msd; + } + targ|=comb<<26; /* add combination field .. */ + targ|=(exp&0x3f)<<20; /* .. and exponent continuation */ + } /* finite */ + + if (dn->bits&DECNEG) targ|=0x80000000; /* add sign bit */ + + /* now write to storage; this is endian */ + pu=(uInt *)d32->bytes; /* overlay */ + *pu=targ; /* directly store the int */ + + if (status!=0) decContextSetStatus(set, status); /* pass on status */ + /* decimal32Show(d32); */ + return d32; + } /* decimal32FromNumber */ + +/* ------------------------------------------------------------------ */ +/* decimal32ToNumber -- convert decimal32 to decNumber */ +/* d32 is the source decimal32 */ +/* dn is the target number, with appropriate space */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +decNumber * decimal32ToNumber(const decimal32 *d32, decNumber *dn) { + uInt msd; /* coefficient MSD */ + uInt exp; /* exponent top two bits */ + uInt comb; /* combination field */ + uInt sour; /* source 32-bit */ + const uInt *pu; /* work */ + + /* load source from storage; this is endian */ + pu=(const uInt *)d32->bytes; /* overlay */ + sour=*pu; /* directly load the int */ + + comb=(sour>>26)&0x1f; /* combination field */ + + decNumberZero(dn); /* clean number */ + if (sour&0x80000000) dn->bits=DECNEG; /* set sign if negative */ + + msd=COMBMSD[comb]; /* decode the combination field */ + exp=COMBEXP[comb]; /* .. */ + + if (exp==3) { /* is a special */ + if (msd==0) { + dn->bits|=DECINF; + return dn; /* no coefficient needed */ + } + else if (sour&0x02000000) dn->bits|=DECSNAN; + else dn->bits|=DECNAN; + msd=0; /* no top digit */ + } + else { /* is a finite number */ + dn->exponent=(exp<<6)+((sour>>20)&0x3f)-DECIMAL32_Bias; /* unbiased */ + } + + /* get the coefficient */ + sour&=0x000fffff; /* clean coefficient continuation */ + if (msd) { /* non-zero msd */ + sour|=msd<<20; /* prefix to coefficient */ + decDigitsFromDPD(dn, &sour, 3); /* process 3 declets */ + return dn; + } + /* msd=0 */ + if (!sour) return dn; /* easy: coefficient is 0 */ + if (sour&0x000ffc00) /* need 2 declets? */ + decDigitsFromDPD(dn, &sour, 2); /* process 2 declets */ + else + decDigitsFromDPD(dn, &sour, 1); /* process 1 declet */ + return dn; + } /* decimal32ToNumber */ + +/* ------------------------------------------------------------------ */ +/* to-scientific-string -- conversion to numeric string */ +/* to-engineering-string -- conversion to numeric string */ +/* */ +/* decimal32ToString(d32, string); */ +/* decimal32ToEngString(d32, string); */ +/* */ +/* d32 is the decimal32 format number to convert */ +/* string is the string where the result will be laid out */ +/* */ +/* string must be at least 24 characters */ +/* */ +/* No error is possible, and no status can be set. */ +/* ------------------------------------------------------------------ */ +char * decimal32ToEngString(const decimal32 *d32, char *string){ + decNumber dn; /* work */ + decimal32ToNumber(d32, &dn); + decNumberToEngString(&dn, string); + return string; + } /* decimal32ToEngString */ + +char * decimal32ToString(const decimal32 *d32, char *string){ + uInt msd; /* coefficient MSD */ + Int exp; /* exponent top two bits or full */ + uInt comb; /* combination field */ + char *cstart; /* coefficient start */ + char *c; /* output pointer in string */ + const uInt *pu; /* work */ + const uByte *u; /* .. */ + char *s, *t; /* .. (source, target) */ + Int dpd; /* .. */ + Int pre, e; /* .. */ + uInt sour; /* source 32-bit */ + + /* load source from storage; this is endian */ + pu=(const uInt *)d32->bytes; /* overlay */ + sour=*pu; /* directly load the int */ + + c=string; /* where result will go */ + if (((Int)sour)<0) *c++='-'; /* handle sign */ + + comb=(sour>>26)&0x1f; /* combination field */ + msd=COMBMSD[comb]; /* decode the combination field */ + exp=COMBEXP[comb]; /* .. */ + + if (exp==3) { + if (msd==0) { /* infinity */ + strcpy(c, "Inf"); + strcpy(c+3, "inity"); + return string; /* easy */ + } + if (sour&0x02000000) *c++='s'; /* sNaN */ + strcpy(c, "NaN"); /* complete word */ + c+=3; /* step past */ + if ((sour&0x000fffff)==0) return string; /* zero payload */ + /* otherwise drop through to add integer; set correct exp */ + exp=0; msd=0; /* setup for following code */ + } + else exp=(exp<<6)+((sour>>20)&0x3f)-DECIMAL32_Bias; /* unbiased */ + + /* convert 7 digits of significand to characters */ + cstart=c; /* save start of coefficient */ + if (msd) *c++='0'+(char)msd; /* non-zero most significant digit */ + + /* Now decode the declets. After extracting each one, it is */ + /* decoded to binary and then to a 4-char sequence by table lookup; */ + /* the 4-chars are a 1-char length (significant digits, except 000 */ + /* has length 0). This allows us to left-align the first declet */ + /* with non-zero content, then remaining ones are full 3-char */ + /* length. We use fixed-length memcpys because variable-length */ + /* causes a subroutine call in GCC. (These are length 4 for speed */ + /* and are safe because the array has an extra terminator byte.) */ + #define dpd2char u=&BIN2CHAR[DPD2BIN[dpd]*4]; \ + if (c!=cstart) {memcpy(c, u+1, 4); c+=3;} \ + else if (*u) {memcpy(c, u+4-*u, 4); c+=*u;} + + dpd=(sour>>10)&0x3ff; /* declet 1 */ + dpd2char; + dpd=(sour)&0x3ff; /* declet 2 */ + dpd2char; + + if (c==cstart) *c++='0'; /* all zeros -- make 0 */ + + if (exp==0) { /* integer or NaN case -- easy */ + *c='\0'; /* terminate */ + return string; + } + + /* non-0 exponent */ + e=0; /* assume no E */ + pre=c-cstart+exp; + /* [here, pre-exp is the digits count (==1 for zero)] */ + if (exp>0 || pre<-5) { /* need exponential form */ + e=pre-1; /* calculate E value */ + pre=1; /* assume one digit before '.' */ + } /* exponential form */ + + /* modify the coefficient, adding 0s, '.', and E+nn as needed */ + s=c-1; /* source (LSD) */ + if (pre>0) { /* ddd.ddd (plain), perhaps with E */ + char *dotat=cstart+pre; + if (dotat<c) { /* if embedded dot needed... */ + t=c; /* target */ + for (; s>=dotat; s--, t--) *t=*s; /* open the gap; leave t at gap */ + *t='.'; /* insert the dot */ + c++; /* length increased by one */ + } + + /* finally add the E-part, if needed; it will never be 0, and has */ + /* a maximum length of 3 digits (E-101 case) */ + if (e!=0) { + *c++='E'; /* starts with E */ + *c++='+'; /* assume positive */ + if (e<0) { + *(c-1)='-'; /* oops, need '-' */ + e=-e; /* uInt, please */ + } + u=&BIN2CHAR[e*4]; /* -> length byte */ + memcpy(c, u+4-*u, 4); /* copy fixed 4 characters [is safe] */ + c+=*u; /* bump pointer appropriately */ + } + *c='\0'; /* add terminator */ + /*printf("res %s\n", string); */ + return string; + } /* pre>0 */ + + /* -5<=pre<=0: here for plain 0.ddd or 0.000ddd forms (can never have E) */ + t=c+1-pre; + *(t+1)='\0'; /* can add terminator now */ + for (; s>=cstart; s--, t--) *t=*s; /* shift whole coefficient right */ + c=cstart; + *c++='0'; /* always starts with 0. */ + *c++='.'; + for (; pre<0; pre++) *c++='0'; /* add any 0's after '.' */ + /*printf("res %s\n", string); */ + return string; + } /* decimal32ToString */ + +/* ------------------------------------------------------------------ */ +/* to-number -- conversion from numeric string */ +/* */ +/* decimal32FromString(result, string, set); */ +/* */ +/* result is the decimal32 format number which gets the result of */ +/* the conversion */ +/* *string is the character string which should contain a valid */ +/* number (which may be a special value) */ +/* set is the context */ +/* */ +/* The context is supplied to this routine is used for error handling */ +/* (setting of status and traps) and for the rounding mode, only. */ +/* If an error occurs, the result will be a valid decimal32 NaN. */ +/* ------------------------------------------------------------------ */ +decimal32 * decimal32FromString(decimal32 *result, const char *string, + decContext *set) { + decContext dc; /* work */ + decNumber dn; /* .. */ + + decContextDefault(&dc, DEC_INIT_DECIMAL32); /* no traps, please */ + dc.round=set->round; /* use supplied rounding */ + + decNumberFromString(&dn, string, &dc); /* will round if needed */ + decimal32FromNumber(result, &dn, &dc); + if (dc.status!=0) { /* something happened */ + decContextSetStatus(set, dc.status); /* .. pass it on */ + } + return result; + } /* decimal32FromString */ + +/* ------------------------------------------------------------------ */ +/* decimal32IsCanonical -- test whether encoding is canonical */ +/* d32 is the source decimal32 */ +/* returns 1 if the encoding of d32 is canonical, 0 otherwise */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +uint32_t decimal32IsCanonical(const decimal32 *d32) { + decNumber dn; /* work */ + decimal32 canon; /* .. */ + decContext dc; /* .. */ + decContextDefault(&dc, DEC_INIT_DECIMAL32); + decimal32ToNumber(d32, &dn); + decimal32FromNumber(&canon, &dn, &dc);/* canon will now be canonical */ + return memcmp(d32, &canon, DECIMAL32_Bytes)==0; + } /* decimal32IsCanonical */ + +/* ------------------------------------------------------------------ */ +/* decimal32Canonical -- copy an encoding, ensuring it is canonical */ +/* d32 is the source decimal32 */ +/* result is the target (may be the same decimal32) */ +/* returns result */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +decimal32 * decimal32Canonical(decimal32 *result, const decimal32 *d32) { + decNumber dn; /* work */ + decContext dc; /* .. */ + decContextDefault(&dc, DEC_INIT_DECIMAL32); + decimal32ToNumber(d32, &dn); + decimal32FromNumber(result, &dn, &dc);/* result will now be canonical */ + return result; + } /* decimal32Canonical */ + +#if DECTRACE || DECCHECK +/* Macros for accessing decimal32 fields. These assume the argument + is a reference (pointer) to the decimal32 structure, and the + decimal32 is in network byte order (big-endian) */ +/* Get sign */ +#define decimal32Sign(d) ((unsigned)(d)->bytes[0]>>7) + +/* Get combination field */ +#define decimal32Comb(d) (((d)->bytes[0] & 0x7c)>>2) + +/* Get exponent continuation [does not remove bias] */ +#define decimal32ExpCon(d) ((((d)->bytes[0] & 0x03)<<4) \ + | ((unsigned)(d)->bytes[1]>>4)) + +/* Set sign [this assumes sign previously 0] */ +#define decimal32SetSign(d, b) { \ + (d)->bytes[0]|=((unsigned)(b)<<7);} + +/* Set exponent continuation [does not apply bias] */ +/* This assumes range has been checked and exponent previously 0; */ +/* type of exponent must be unsigned */ +#define decimal32SetExpCon(d, e) { \ + (d)->bytes[0]|=(uint8_t)((e)>>4); \ + (d)->bytes[1]|=(uint8_t)(((e)&0x0F)<<4);} + +/* ------------------------------------------------------------------ */ +/* decimal32Show -- display a decimal32 in hexadecimal [debug aid] */ +/* d32 -- the number to show */ +/* ------------------------------------------------------------------ */ +/* Also shows sign/cob/expconfields extracted - valid bigendian only */ +void decimal32Show(const decimal32 *d32) { + char buf[DECIMAL32_Bytes*2+1]; + Int i, j=0; + + if (DECLITEND) { + for (i=0; i<DECIMAL32_Bytes; i++, j+=2) { + sprintf(&buf[j], "%02x", d32->bytes[3-i]); + } + printf(" D32> %s [S:%d Cb:%02x Ec:%02x] LittleEndian\n", buf, + d32->bytes[3]>>7, (d32->bytes[3]>>2)&0x1f, + ((d32->bytes[3]&0x3)<<4)| (d32->bytes[2]>>4)); + } + else { + for (i=0; i<DECIMAL32_Bytes; i++, j+=2) { + sprintf(&buf[j], "%02x", d32->bytes[i]); + } + printf(" D32> %s [S:%d Cb:%02x Ec:%02x] BigEndian\n", buf, + decimal32Sign(d32), decimal32Comb(d32), decimal32ExpCon(d32)); + } + } /* decimal32Show */ +#endif diff --git a/libdecnumber/dpd/decimal32.h b/libdecnumber/dpd/decimal32.h new file mode 100644 index 0000000..0d53046 --- /dev/null +++ b/libdecnumber/dpd/decimal32.h @@ -0,0 +1,99 @@ +/* Decimal 32-bit format module header for the decNumber C Library. + Copyright (C) 2005, 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* Decimal 32-bit format module header */ +/* ------------------------------------------------------------------ */ + +#if !defined(DECIMAL32) + #define DECIMAL32 + #define DEC32NAME "decimal32" /* Short name */ + #define DEC32FULLNAME "Decimal 32-bit Number" /* Verbose name */ + #define DEC32AUTHOR "Mike Cowlishaw" /* Who to blame */ + + /* parameters for decimal32s */ + #define DECIMAL32_Bytes 4 /* length */ + #define DECIMAL32_Pmax 7 /* maximum precision (digits) */ + #define DECIMAL32_Emax 96 /* maximum adjusted exponent */ + #define DECIMAL32_Emin -95 /* minimum adjusted exponent */ + #define DECIMAL32_Bias 101 /* bias for the exponent */ + #define DECIMAL32_String 15 /* maximum string length, +1 */ + #define DECIMAL32_EconL 6 /* exp. continuation length */ + /* highest biased exponent (Elimit-1) */ + #define DECIMAL32_Ehigh (DECIMAL32_Emax+DECIMAL32_Bias-DECIMAL32_Pmax+1) + + /* check enough digits, if pre-defined */ + #if defined(DECNUMDIGITS) + #if (DECNUMDIGITS<DECIMAL32_Pmax) + #error decimal32.h needs pre-defined DECNUMDIGITS>=7 for safe use + #endif + #endif + + #ifndef DECNUMDIGITS + #define DECNUMDIGITS DECIMAL32_Pmax /* size if not already defined*/ + #endif + #ifndef DECNUMBER + #include "decNumber.h" /* context and number library */ + #endif + + /* Decimal 32-bit type, accessible by bytes */ + typedef struct { + uint8_t bytes[DECIMAL32_Bytes]; /* decimal32: 1, 5, 6, 20 bits*/ + } decimal32; + + /* special values [top byte excluding sign bit; last two bits are */ + /* don't-care for Infinity on input, last bit don't-care for NaN] */ + #if !defined(DECIMAL_NaN) + #define DECIMAL_NaN 0x7c /* 0 11111 00 NaN */ + #define DECIMAL_sNaN 0x7e /* 0 11111 10 sNaN */ + #define DECIMAL_Inf 0x78 /* 0 11110 00 Infinity */ + #endif + + /* ---------------------------------------------------------------- */ + /* Routines */ + /* ---------------------------------------------------------------- */ + + #include "decimal32Symbols.h" + + /* String conversions */ + decimal32 * decimal32FromString(decimal32 *, const char *, decContext *); + char * decimal32ToString(const decimal32 *, char *); + char * decimal32ToEngString(const decimal32 *, char *); + + /* decNumber conversions */ + decimal32 * decimal32FromNumber(decimal32 *, const decNumber *, + decContext *); + decNumber * decimal32ToNumber(const decimal32 *, decNumber *); + + /* Format-dependent utilities */ + uint32_t decimal32IsCanonical(const decimal32 *); + decimal32 * decimal32Canonical(decimal32 *, const decimal32 *); + +#endif diff --git a/libdecnumber/dpd/decimal32Symbols.h b/libdecnumber/dpd/decimal32Symbols.h new file mode 100644 index 0000000..de11934 --- /dev/null +++ b/libdecnumber/dpd/decimal32Symbols.h @@ -0,0 +1,16 @@ +#if !defined(DECIMAL32SYMBOLS) +#define DECIMAL32SYMBOLS + +#ifdef IN_LIBGCC2 +#define decDigitsFromDPD __decDigitsFromDPD +#define decDigitsToDPD __decDigitsToDPD +#define decimal32Canonical __decimal32Canonical +#define decimal32FromNumber __decimal32FromNumber +#define decimal32FromString __decimal32FromString +#define decimal32IsCanonical __decimal32IsCanonical +#define decimal32ToEngString __decimal32ToEngString +#define decimal32ToNumber __decimal32ToNumber +#define decimal32ToString __decimal32ToString +#endif + +#endif diff --git a/libdecnumber/dpd/decimal64.c b/libdecnumber/dpd/decimal64.c new file mode 100644 index 0000000..359214e --- /dev/null +++ b/libdecnumber/dpd/decimal64.c @@ -0,0 +1,856 @@ +/* Decimal 64-bit format module for the decNumber C Library. + Copyright (C) 2005, 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* Decimal 64-bit format module */ +/* ------------------------------------------------------------------ */ +/* This module comprises the routines for decimal64 format numbers. */ +/* Conversions are supplied to and from decNumber and String. */ +/* */ +/* This is used when decNumber provides operations, either for all */ +/* operations or as a proxy between decNumber and decSingle. */ +/* */ +/* Error handling is the same as decNumber (qv.). */ +/* ------------------------------------------------------------------ */ +#include <string.h> /* [for memset/memcpy] */ +#include <stdio.h> /* [for printf] */ + +#include "config.h" /* GCC definitions */ +#define DECNUMDIGITS 16 /* make decNumbers with space for 16 */ +#include "decNumber.h" /* base number library */ +#include "decNumberLocal.h" /* decNumber local types, etc. */ +#include "decimal64.h" /* our primary include */ + +/* Utility routines and tables [in decimal64.c]; externs for C++ */ +/* DPD2BIN and the reverse are renamed to prevent link-time conflict */ +/* if decQuad is also built in the same executable */ +#define DPD2BIN DPD2BINx +#define BIN2DPD BIN2DPDx +extern const uInt COMBEXP[32], COMBMSD[32]; +extern const uShort DPD2BIN[1024]; +extern const uShort BIN2DPD[1000]; +extern const uByte BIN2CHAR[4001]; + +extern void decDigitsFromDPD(decNumber *, const uInt *, Int); +extern void decDigitsToDPD(const decNumber *, uInt *, Int); + +#if DECTRACE || DECCHECK +void decimal64Show(const decimal64 *); /* for debug */ +extern void decNumberShow(const decNumber *); /* .. */ +#endif + +/* Useful macro */ +/* Clear a structure (e.g., a decNumber) */ +#define DEC_clear(d) memset(d, 0, sizeof(*d)) + +/* define and include the tables to use for conversions */ +#define DEC_BIN2CHAR 1 +#define DEC_DPD2BIN 1 +#define DEC_BIN2DPD 1 /* used for all sizes */ +#include "decDPD.h" /* lookup tables */ + +/* ------------------------------------------------------------------ */ +/* decimal64FromNumber -- convert decNumber to decimal64 */ +/* */ +/* ds is the target decimal64 */ +/* dn is the source number (assumed valid) */ +/* set is the context, used only for reporting errors */ +/* */ +/* The set argument is used only for status reporting and for the */ +/* rounding mode (used if the coefficient is more than DECIMAL64_Pmax */ +/* digits or an overflow is detected). If the exponent is out of the */ +/* valid range then Overflow or Underflow will be raised. */ +/* After Underflow a subnormal result is possible. */ +/* */ +/* DEC_Clamped is set if the number has to be 'folded down' to fit, */ +/* by reducing its exponent and multiplying the coefficient by a */ +/* power of ten, or if the exponent on a zero had to be clamped. */ +/* ------------------------------------------------------------------ */ +decimal64 * decimal64FromNumber(decimal64 *d64, const decNumber *dn, + decContext *set) { + uInt status=0; /* status accumulator */ + Int ae; /* adjusted exponent */ + decNumber dw; /* work */ + decContext dc; /* .. */ + uInt *pu; /* .. */ + uInt comb, exp; /* .. */ + uInt targar[2]={0, 0}; /* target 64-bit */ + #define targhi targar[1] /* name the word with the sign */ + #define targlo targar[0] /* and the other */ + + /* If the number has too many digits, or the exponent could be */ + /* out of range then reduce the number under the appropriate */ + /* constraints. This could push the number to Infinity or zero, */ + /* so this check and rounding must be done before generating the */ + /* decimal64] */ + ae=dn->exponent+dn->digits-1; /* [0 if special] */ + if (dn->digits>DECIMAL64_Pmax /* too many digits */ + || ae>DECIMAL64_Emax /* likely overflow */ + || ae<DECIMAL64_Emin) { /* likely underflow */ + decContextDefault(&dc, DEC_INIT_DECIMAL64); /* [no traps] */ + dc.round=set->round; /* use supplied rounding */ + decNumberPlus(&dw, dn, &dc); /* (round and check) */ + /* [this changes -0 to 0, so enforce the sign...] */ + dw.bits|=dn->bits&DECNEG; + status=dc.status; /* save status */ + dn=&dw; /* use the work number */ + } /* maybe out of range */ + + if (dn->bits&DECSPECIAL) { /* a special value */ + if (dn->bits&DECINF) targhi=DECIMAL_Inf<<24; + else { /* sNaN or qNaN */ + if ((*dn->lsu!=0 || dn->digits>1) /* non-zero coefficient */ + && (dn->digits<DECIMAL64_Pmax)) { /* coefficient fits */ + decDigitsToDPD(dn, targar, 0); + } + if (dn->bits&DECNAN) targhi|=DECIMAL_NaN<<24; + else targhi|=DECIMAL_sNaN<<24; + } /* a NaN */ + } /* special */ + + else { /* is finite */ + if (decNumberIsZero(dn)) { /* is a zero */ + /* set and clamp exponent */ + if (dn->exponent<-DECIMAL64_Bias) { + exp=0; /* low clamp */ + status|=DEC_Clamped; + } + else { + exp=dn->exponent+DECIMAL64_Bias; /* bias exponent */ + if (exp>DECIMAL64_Ehigh) { /* top clamp */ + exp=DECIMAL64_Ehigh; + status|=DEC_Clamped; + } + } + comb=(exp>>5) & 0x18; /* msd=0, exp top 2 bits .. */ + } + else { /* non-zero finite number */ + uInt msd; /* work */ + Int pad=0; /* coefficient pad digits */ + + /* the dn is known to fit, but it may need to be padded */ + exp=(uInt)(dn->exponent+DECIMAL64_Bias); /* bias exponent */ + if (exp>DECIMAL64_Ehigh) { /* fold-down case */ + pad=exp-DECIMAL64_Ehigh; + exp=DECIMAL64_Ehigh; /* [to maximum] */ + status|=DEC_Clamped; + } + + /* fastpath common case */ + if (DECDPUN==3 && pad==0) { + uInt dpd[6]={0,0,0,0,0,0}; + uInt i; + Int d=dn->digits; + for (i=0; d>0; i++, d-=3) dpd[i]=BIN2DPD[dn->lsu[i]]; + targlo =dpd[0]; + targlo|=dpd[1]<<10; + targlo|=dpd[2]<<20; + if (dn->digits>6) { + targlo|=dpd[3]<<30; + targhi =dpd[3]>>2; + targhi|=dpd[4]<<8; + } + msd=dpd[5]; /* [did not really need conversion] */ + } + else { /* general case */ + decDigitsToDPD(dn, targar, pad); + /* save and clear the top digit */ + msd=targhi>>18; + targhi&=0x0003ffff; + } + + /* create the combination field */ + if (msd>=8) comb=0x18 | ((exp>>7) & 0x06) | (msd & 0x01); + else comb=((exp>>5) & 0x18) | msd; + } + targhi|=comb<<26; /* add combination field .. */ + targhi|=(exp&0xff)<<18; /* .. and exponent continuation */ + } /* finite */ + + if (dn->bits&DECNEG) targhi|=0x80000000; /* add sign bit */ + + /* now write to storage; this is now always endian */ + pu=(uInt *)d64->bytes; /* overlay */ + if (DECLITEND) { + pu[0]=targar[0]; /* directly store the low int */ + pu[1]=targar[1]; /* then the high int */ + } + else { + pu[0]=targar[1]; /* directly store the high int */ + pu[1]=targar[0]; /* then the low int */ + } + + if (status!=0) decContextSetStatus(set, status); /* pass on status */ + /* decimal64Show(d64); */ + return d64; + } /* decimal64FromNumber */ + +/* ------------------------------------------------------------------ */ +/* decimal64ToNumber -- convert decimal64 to decNumber */ +/* d64 is the source decimal64 */ +/* dn is the target number, with appropriate space */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +decNumber * decimal64ToNumber(const decimal64 *d64, decNumber *dn) { + uInt msd; /* coefficient MSD */ + uInt exp; /* exponent top two bits */ + uInt comb; /* combination field */ + const uInt *pu; /* work */ + Int need; /* .. */ + uInt sourar[2]; /* source 64-bit */ + #define sourhi sourar[1] /* name the word with the sign */ + #define sourlo sourar[0] /* and the lower word */ + + /* load source from storage; this is endian */ + pu=(const uInt *)d64->bytes; /* overlay */ + if (DECLITEND) { + sourlo=pu[0]; /* directly load the low int */ + sourhi=pu[1]; /* then the high int */ + } + else { + sourhi=pu[0]; /* directly load the high int */ + sourlo=pu[1]; /* then the low int */ + } + + comb=(sourhi>>26)&0x1f; /* combination field */ + + decNumberZero(dn); /* clean number */ + if (sourhi&0x80000000) dn->bits=DECNEG; /* set sign if negative */ + + msd=COMBMSD[comb]; /* decode the combination field */ + exp=COMBEXP[comb]; /* .. */ + + if (exp==3) { /* is a special */ + if (msd==0) { + dn->bits|=DECINF; + return dn; /* no coefficient needed */ + } + else if (sourhi&0x02000000) dn->bits|=DECSNAN; + else dn->bits|=DECNAN; + msd=0; /* no top digit */ + } + else { /* is a finite number */ + dn->exponent=(exp<<8)+((sourhi>>18)&0xff)-DECIMAL64_Bias; /* unbiased */ + } + + /* get the coefficient */ + sourhi&=0x0003ffff; /* clean coefficient continuation */ + if (msd) { /* non-zero msd */ + sourhi|=msd<<18; /* prefix to coefficient */ + need=6; /* process 6 declets */ + } + else { /* msd=0 */ + if (!sourhi) { /* top word 0 */ + if (!sourlo) return dn; /* easy: coefficient is 0 */ + need=3; /* process at least 3 declets */ + if (sourlo&0xc0000000) need++; /* process 4 declets */ + /* [could reduce some more, here] */ + } + else { /* some bits in top word, msd=0 */ + need=4; /* process at least 4 declets */ + if (sourhi&0x0003ff00) need++; /* top declet!=0, process 5 */ + } + } /*msd=0 */ + + decDigitsFromDPD(dn, sourar, need); /* process declets */ + return dn; + } /* decimal64ToNumber */ + + +/* ------------------------------------------------------------------ */ +/* to-scientific-string -- conversion to numeric string */ +/* to-engineering-string -- conversion to numeric string */ +/* */ +/* decimal64ToString(d64, string); */ +/* decimal64ToEngString(d64, string); */ +/* */ +/* d64 is the decimal64 format number to convert */ +/* string is the string where the result will be laid out */ +/* */ +/* string must be at least 24 characters */ +/* */ +/* No error is possible, and no status can be set. */ +/* ------------------------------------------------------------------ */ +char * decimal64ToEngString(const decimal64 *d64, char *string){ + decNumber dn; /* work */ + decimal64ToNumber(d64, &dn); + decNumberToEngString(&dn, string); + return string; + } /* decimal64ToEngString */ + +char * decimal64ToString(const decimal64 *d64, char *string){ + uInt msd; /* coefficient MSD */ + Int exp; /* exponent top two bits or full */ + uInt comb; /* combination field */ + char *cstart; /* coefficient start */ + char *c; /* output pointer in string */ + const uInt *pu; /* work */ + char *s, *t; /* .. (source, target) */ + Int dpd; /* .. */ + Int pre, e; /* .. */ + const uByte *u; /* .. */ + + uInt sourar[2]; /* source 64-bit */ + #define sourhi sourar[1] /* name the word with the sign */ + #define sourlo sourar[0] /* and the lower word */ + + /* load source from storage; this is endian */ + pu=(const uInt *)d64->bytes; /* overlay */ + if (DECLITEND) { + sourlo=pu[0]; /* directly load the low int */ + sourhi=pu[1]; /* then the high int */ + } + else { + sourhi=pu[0]; /* directly load the high int */ + sourlo=pu[1]; /* then the low int */ + } + + c=string; /* where result will go */ + if (((Int)sourhi)<0) *c++='-'; /* handle sign */ + + comb=(sourhi>>26)&0x1f; /* combination field */ + msd=COMBMSD[comb]; /* decode the combination field */ + exp=COMBEXP[comb]; /* .. */ + + if (exp==3) { + if (msd==0) { /* infinity */ + strcpy(c, "Inf"); + strcpy(c+3, "inity"); + return string; /* easy */ + } + if (sourhi&0x02000000) *c++='s'; /* sNaN */ + strcpy(c, "NaN"); /* complete word */ + c+=3; /* step past */ + if (sourlo==0 && (sourhi&0x0003ffff)==0) return string; /* zero payload */ + /* otherwise drop through to add integer; set correct exp */ + exp=0; msd=0; /* setup for following code */ + } + else exp=(exp<<8)+((sourhi>>18)&0xff)-DECIMAL64_Bias; + + /* convert 16 digits of significand to characters */ + cstart=c; /* save start of coefficient */ + if (msd) *c++='0'+(char)msd; /* non-zero most significant digit */ + + /* Now decode the declets. After extracting each one, it is */ + /* decoded to binary and then to a 4-char sequence by table lookup; */ + /* the 4-chars are a 1-char length (significant digits, except 000 */ + /* has length 0). This allows us to left-align the first declet */ + /* with non-zero content, then remaining ones are full 3-char */ + /* length. We use fixed-length memcpys because variable-length */ + /* causes a subroutine call in GCC. (These are length 4 for speed */ + /* and are safe because the array has an extra terminator byte.) */ + #define dpd2char u=&BIN2CHAR[DPD2BIN[dpd]*4]; \ + if (c!=cstart) {memcpy(c, u+1, 4); c+=3;} \ + else if (*u) {memcpy(c, u+4-*u, 4); c+=*u;} + + dpd=(sourhi>>8)&0x3ff; /* declet 1 */ + dpd2char; + dpd=((sourhi&0xff)<<2) | (sourlo>>30); /* declet 2 */ + dpd2char; + dpd=(sourlo>>20)&0x3ff; /* declet 3 */ + dpd2char; + dpd=(sourlo>>10)&0x3ff; /* declet 4 */ + dpd2char; + dpd=(sourlo)&0x3ff; /* declet 5 */ + dpd2char; + + if (c==cstart) *c++='0'; /* all zeros -- make 0 */ + + if (exp==0) { /* integer or NaN case -- easy */ + *c='\0'; /* terminate */ + return string; + } + + /* non-0 exponent */ + e=0; /* assume no E */ + pre=c-cstart+exp; + /* [here, pre-exp is the digits count (==1 for zero)] */ + if (exp>0 || pre<-5) { /* need exponential form */ + e=pre-1; /* calculate E value */ + pre=1; /* assume one digit before '.' */ + } /* exponential form */ + + /* modify the coefficient, adding 0s, '.', and E+nn as needed */ + s=c-1; /* source (LSD) */ + if (pre>0) { /* ddd.ddd (plain), perhaps with E */ + char *dotat=cstart+pre; + if (dotat<c) { /* if embedded dot needed... */ + t=c; /* target */ + for (; s>=dotat; s--, t--) *t=*s; /* open the gap; leave t at gap */ + *t='.'; /* insert the dot */ + c++; /* length increased by one */ + } + + /* finally add the E-part, if needed; it will never be 0, and has */ + /* a maximum length of 3 digits */ + if (e!=0) { + *c++='E'; /* starts with E */ + *c++='+'; /* assume positive */ + if (e<0) { + *(c-1)='-'; /* oops, need '-' */ + e=-e; /* uInt, please */ + } + u=&BIN2CHAR[e*4]; /* -> length byte */ + memcpy(c, u+4-*u, 4); /* copy fixed 4 characters [is safe] */ + c+=*u; /* bump pointer appropriately */ + } + *c='\0'; /* add terminator */ + /*printf("res %s\n", string); */ + return string; + } /* pre>0 */ + + /* -5<=pre<=0: here for plain 0.ddd or 0.000ddd forms (can never have E) */ + t=c+1-pre; + *(t+1)='\0'; /* can add terminator now */ + for (; s>=cstart; s--, t--) *t=*s; /* shift whole coefficient right */ + c=cstart; + *c++='0'; /* always starts with 0. */ + *c++='.'; + for (; pre<0; pre++) *c++='0'; /* add any 0's after '.' */ + /*printf("res %s\n", string); */ + return string; + } /* decimal64ToString */ + +/* ------------------------------------------------------------------ */ +/* to-number -- conversion from numeric string */ +/* */ +/* decimal64FromString(result, string, set); */ +/* */ +/* result is the decimal64 format number which gets the result of */ +/* the conversion */ +/* *string is the character string which should contain a valid */ +/* number (which may be a special value) */ +/* set is the context */ +/* */ +/* The context is supplied to this routine is used for error handling */ +/* (setting of status and traps) and for the rounding mode, only. */ +/* If an error occurs, the result will be a valid decimal64 NaN. */ +/* ------------------------------------------------------------------ */ +decimal64 * decimal64FromString(decimal64 *result, const char *string, + decContext *set) { + decContext dc; /* work */ + decNumber dn; /* .. */ + + decContextDefault(&dc, DEC_INIT_DECIMAL64); /* no traps, please */ + dc.round=set->round; /* use supplied rounding */ + + decNumberFromString(&dn, string, &dc); /* will round if needed */ + + decimal64FromNumber(result, &dn, &dc); + if (dc.status!=0) { /* something happened */ + decContextSetStatus(set, dc.status); /* .. pass it on */ + } + return result; + } /* decimal64FromString */ + +/* ------------------------------------------------------------------ */ +/* decimal64IsCanonical -- test whether encoding is canonical */ +/* d64 is the source decimal64 */ +/* returns 1 if the encoding of d64 is canonical, 0 otherwise */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +uint32_t decimal64IsCanonical(const decimal64 *d64) { + decNumber dn; /* work */ + decimal64 canon; /* .. */ + decContext dc; /* .. */ + decContextDefault(&dc, DEC_INIT_DECIMAL64); + decimal64ToNumber(d64, &dn); + decimal64FromNumber(&canon, &dn, &dc);/* canon will now be canonical */ + return memcmp(d64, &canon, DECIMAL64_Bytes)==0; + } /* decimal64IsCanonical */ + +/* ------------------------------------------------------------------ */ +/* decimal64Canonical -- copy an encoding, ensuring it is canonical */ +/* d64 is the source decimal64 */ +/* result is the target (may be the same decimal64) */ +/* returns result */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +decimal64 * decimal64Canonical(decimal64 *result, const decimal64 *d64) { + decNumber dn; /* work */ + decContext dc; /* .. */ + decContextDefault(&dc, DEC_INIT_DECIMAL64); + decimal64ToNumber(d64, &dn); + decimal64FromNumber(result, &dn, &dc);/* result will now be canonical */ + return result; + } /* decimal64Canonical */ + +#if DECTRACE || DECCHECK +/* Macros for accessing decimal64 fields. These assume the + argument is a reference (pointer) to the decimal64 structure, + and the decimal64 is in network byte order (big-endian) */ +/* Get sign */ +#define decimal64Sign(d) ((unsigned)(d)->bytes[0]>>7) + +/* Get combination field */ +#define decimal64Comb(d) (((d)->bytes[0] & 0x7c)>>2) + +/* Get exponent continuation [does not remove bias] */ +#define decimal64ExpCon(d) ((((d)->bytes[0] & 0x03)<<6) \ + | ((unsigned)(d)->bytes[1]>>2)) + +/* Set sign [this assumes sign previously 0] */ +#define decimal64SetSign(d, b) { \ + (d)->bytes[0]|=((unsigned)(b)<<7);} + +/* Set exponent continuation [does not apply bias] */ +/* This assumes range has been checked and exponent previously 0; */ +/* type of exponent must be unsigned */ +#define decimal64SetExpCon(d, e) { \ + (d)->bytes[0]|=(uint8_t)((e)>>6); \ + (d)->bytes[1]|=(uint8_t)(((e)&0x3F)<<2);} + +/* ------------------------------------------------------------------ */ +/* decimal64Show -- display a decimal64 in hexadecimal [debug aid] */ +/* d64 -- the number to show */ +/* ------------------------------------------------------------------ */ +/* Also shows sign/cob/expconfields extracted */ +void decimal64Show(const decimal64 *d64) { + char buf[DECIMAL64_Bytes*2+1]; + Int i, j=0; + + if (DECLITEND) { + for (i=0; i<DECIMAL64_Bytes; i++, j+=2) { + sprintf(&buf[j], "%02x", d64->bytes[7-i]); + } + printf(" D64> %s [S:%d Cb:%02x Ec:%02x] LittleEndian\n", buf, + d64->bytes[7]>>7, (d64->bytes[7]>>2)&0x1f, + ((d64->bytes[7]&0x3)<<6)| (d64->bytes[6]>>2)); + } + else { /* big-endian */ + for (i=0; i<DECIMAL64_Bytes; i++, j+=2) { + sprintf(&buf[j], "%02x", d64->bytes[i]); + } + printf(" D64> %s [S:%d Cb:%02x Ec:%02x] BigEndian\n", buf, + decimal64Sign(d64), decimal64Comb(d64), decimal64ExpCon(d64)); + } + } /* decimal64Show */ +#endif + +/* ================================================================== */ +/* Shared utility routines and tables */ +/* ================================================================== */ +/* define and include the conversion tables to use for shared code */ +#if DECDPUN==3 + #define DEC_DPD2BIN 1 +#else + #define DEC_DPD2BCD 1 +#endif +#include "decDPD.h" /* lookup tables */ + +/* The maximum number of decNumberUnits needed for a working copy of */ +/* the units array is the ceiling of digits/DECDPUN, where digits is */ +/* the maximum number of digits in any of the formats for which this */ +/* is used. decimal128.h must not be included in this module, so, as */ +/* a very special case, that number is defined as a literal here. */ +#define DECMAX754 34 +#define DECMAXUNITS ((DECMAX754+DECDPUN-1)/DECDPUN) + +/* ------------------------------------------------------------------ */ +/* Combination field lookup tables (uInts to save measurable work) */ +/* */ +/* COMBEXP - 2-bit most-significant-bits of exponent */ +/* [11 if an Infinity or NaN] */ +/* COMBMSD - 4-bit most-significant-digit */ +/* [0=Infinity, 1=NaN if COMBEXP=11] */ +/* */ +/* Both are indexed by the 5-bit combination field (0-31) */ +/* ------------------------------------------------------------------ */ +const uInt COMBEXP[32]={0, 0, 0, 0, 0, 0, 0, 0, + 1, 1, 1, 1, 1, 1, 1, 1, + 2, 2, 2, 2, 2, 2, 2, 2, + 0, 0, 1, 1, 2, 2, 3, 3}; +const uInt COMBMSD[32]={0, 1, 2, 3, 4, 5, 6, 7, + 0, 1, 2, 3, 4, 5, 6, 7, + 0, 1, 2, 3, 4, 5, 6, 7, + 8, 9, 8, 9, 8, 9, 0, 1}; + +/* ------------------------------------------------------------------ */ +/* decDigitsToDPD -- pack coefficient into DPD form */ +/* */ +/* dn is the source number (assumed valid, max DECMAX754 digits) */ +/* targ is 1, 2, or 4-element uInt array, which the caller must */ +/* have cleared to zeros */ +/* shift is the number of 0 digits to add on the right (normally 0) */ +/* */ +/* The coefficient must be known small enough to fit. The full */ +/* coefficient is copied, including the leading 'odd' digit. This */ +/* digit is retrieved and packed into the combination field by the */ +/* caller. */ +/* */ +/* The target uInts are altered only as necessary to receive the */ +/* digits of the decNumber. When more than one uInt is needed, they */ +/* are filled from left to right (that is, the uInt at offset 0 will */ +/* end up with the least-significant digits). */ +/* */ +/* shift is used for 'fold-down' padding. */ +/* */ +/* No error is possible. */ +/* ------------------------------------------------------------------ */ +#if DECDPUN<=4 +/* Constant multipliers for divide-by-power-of five using reciprocal */ +/* multiply, after removing powers of 2 by shifting, and final shift */ +/* of 17 [we only need up to **4] */ +static const uInt multies[]={131073, 26215, 5243, 1049, 210}; +/* QUOT10 -- macro to return the quotient of unit u divided by 10**n */ +#define QUOT10(u, n) ((((uInt)(u)>>(n))*multies[n])>>17) +#endif +void decDigitsToDPD(const decNumber *dn, uInt *targ, Int shift) { + Int cut; /* work */ + Int n; /* output bunch counter */ + Int digits=dn->digits; /* digit countdown */ + uInt dpd; /* densely packed decimal value */ + uInt bin; /* binary value 0-999 */ + uInt *uout=targ; /* -> current output uInt */ + uInt uoff=0; /* -> current output offset [from right] */ + const Unit *inu=dn->lsu; /* -> current input unit */ + Unit uar[DECMAXUNITS]; /* working copy of units, iff shifted */ + #if DECDPUN!=3 /* not fast path */ + Unit in; /* current unit */ + #endif + + if (shift!=0) { /* shift towards most significant required */ + /* shift the units array to the left by pad digits and copy */ + /* [this code is a special case of decShiftToMost, which could */ + /* be used instead if exposed and the array were copied first] */ + const Unit *source; /* .. */ + Unit *target, *first; /* .. */ + uInt next=0; /* work */ + + source=dn->lsu+D2U(digits)-1; /* where msu comes from */ + target=uar+D2U(digits)-1+D2U(shift);/* where upper part of first cut goes */ + cut=DECDPUN-MSUDIGITS(shift); /* where to slice */ + if (cut==0) { /* unit-boundary case */ + for (; source>=dn->lsu; source--, target--) *target=*source; + } + else { + first=uar+D2U(digits+shift)-1; /* where msu will end up */ + for (; source>=dn->lsu; source--, target--) { + /* split the source Unit and accumulate remainder for next */ + #if DECDPUN<=4 + uInt quot=QUOT10(*source, cut); + uInt rem=*source-quot*DECPOWERS[cut]; + next+=quot; + #else + uInt rem=*source%DECPOWERS[cut]; + next+=*source/DECPOWERS[cut]; + #endif + if (target<=first) *target=(Unit)next; /* write to target iff valid */ + next=rem*DECPOWERS[DECDPUN-cut]; /* save remainder for next Unit */ + } + } /* shift-move */ + /* propagate remainder to one below and clear the rest */ + for (; target>=uar; target--) { + *target=(Unit)next; + next=0; + } + digits+=shift; /* add count (shift) of zeros added */ + inu=uar; /* use units in working array */ + } + + /* now densely pack the coefficient into DPD declets */ + + #if DECDPUN!=3 /* not fast path */ + in=*inu; /* current unit */ + cut=0; /* at lowest digit */ + bin=0; /* [keep compiler quiet] */ + #endif + + for(n=0; digits>0; n++) { /* each output bunch */ + #if DECDPUN==3 /* fast path, 3-at-a-time */ + bin=*inu; /* 3 digits ready for convert */ + digits-=3; /* [may go negative] */ + inu++; /* may need another */ + + #else /* must collect digit-by-digit */ + Unit dig; /* current digit */ + Int j; /* digit-in-declet count */ + for (j=0; j<3; j++) { + #if DECDPUN<=4 + Unit temp=(Unit)((uInt)(in*6554)>>16); + dig=(Unit)(in-X10(temp)); + in=temp; + #else + dig=in%10; + in=in/10; + #endif + if (j==0) bin=dig; + else if (j==1) bin+=X10(dig); + else /* j==2 */ bin+=X100(dig); + digits--; + if (digits==0) break; /* [also protects *inu below] */ + cut++; + if (cut==DECDPUN) {inu++; in=*inu; cut=0;} + } + #endif + /* here there are 3 digits in bin, or have used all input digits */ + + dpd=BIN2DPD[bin]; + + /* write declet to uInt array */ + *uout|=dpd<<uoff; + uoff+=10; + if (uoff<32) continue; /* no uInt boundary cross */ + uout++; + uoff-=32; + *uout|=dpd>>(10-uoff); /* collect top bits */ + } /* n declets */ + return; + } /* decDigitsToDPD */ + +/* ------------------------------------------------------------------ */ +/* decDigitsFromDPD -- unpack a format's coefficient */ +/* */ +/* dn is the target number, with 7, 16, or 34-digit space. */ +/* sour is a 1, 2, or 4-element uInt array containing only declets */ +/* declets is the number of (right-aligned) declets in sour to */ +/* be processed. This may be 1 more than the obvious number in */ +/* a format, as any top digit is prefixed to the coefficient */ +/* continuation field. It also may be as small as 1, as the */ +/* caller may pre-process leading zero declets. */ +/* */ +/* When doing the 'extra declet' case care is taken to avoid writing */ +/* extra digits when there are leading zeros, as these could overflow */ +/* the units array when DECDPUN is not 3. */ +/* */ +/* The target uInts are used only as necessary to process declets */ +/* declets into the decNumber. When more than one uInt is needed, */ +/* they are used from left to right (that is, the uInt at offset 0 */ +/* provides the least-significant digits). */ +/* */ +/* dn->digits is set, but not the sign or exponent. */ +/* No error is possible [the redundant 888 codes are allowed]. */ +/* ------------------------------------------------------------------ */ +void decDigitsFromDPD(decNumber *dn, const uInt *sour, Int declets) { + + uInt dpd; /* collector for 10 bits */ + Int n; /* counter */ + Unit *uout=dn->lsu; /* -> current output unit */ + Unit *last=uout; /* will be unit containing msd */ + const uInt *uin=sour; /* -> current input uInt */ + uInt uoff=0; /* -> current input offset [from right] */ + + #if DECDPUN!=3 + uInt bcd; /* BCD result */ + uInt nibble; /* work */ + Unit out=0; /* accumulator */ + Int cut=0; /* power of ten in current unit */ + #endif + #if DECDPUN>4 + uInt const *pow; /* work */ + #endif + + /* Expand the densely-packed integer, right to left */ + for (n=declets-1; n>=0; n--) { /* count down declets of 10 bits */ + dpd=*uin>>uoff; + uoff+=10; + if (uoff>32) { /* crossed uInt boundary */ + uin++; + uoff-=32; + dpd|=*uin<<(10-uoff); /* get waiting bits */ + } + dpd&=0x3ff; /* clear uninteresting bits */ + + #if DECDPUN==3 + if (dpd==0) *uout=0; + else { + *uout=DPD2BIN[dpd]; /* convert 10 bits to binary 0-999 */ + last=uout; /* record most significant unit */ + } + uout++; + } /* n */ + + #else /* DECDPUN!=3 */ + if (dpd==0) { /* fastpath [e.g., leading zeros] */ + /* write out three 0 digits (nibbles); out may have digit(s) */ + cut++; + if (cut==DECDPUN) {*uout=out; if (out) {last=uout; out=0;} uout++; cut=0;} + if (n==0) break; /* [as below, works even if MSD=0] */ + cut++; + if (cut==DECDPUN) {*uout=out; if (out) {last=uout; out=0;} uout++; cut=0;} + cut++; + if (cut==DECDPUN) {*uout=out; if (out) {last=uout; out=0;} uout++; cut=0;} + continue; + } + + bcd=DPD2BCD[dpd]; /* convert 10 bits to 12 bits BCD */ + + /* now accumulate the 3 BCD nibbles into units */ + nibble=bcd & 0x00f; + if (nibble) out=(Unit)(out+nibble*DECPOWERS[cut]); + cut++; + if (cut==DECDPUN) {*uout=out; if (out) {last=uout; out=0;} uout++; cut=0;} + bcd>>=4; + + /* if this is the last declet and the remaining nibbles in bcd */ + /* are 00 then process no more nibbles, because this could be */ + /* the 'odd' MSD declet and writing any more Units would then */ + /* overflow the unit array */ + if (n==0 && !bcd) break; + + nibble=bcd & 0x00f; + if (nibble) out=(Unit)(out+nibble*DECPOWERS[cut]); + cut++; + if (cut==DECDPUN) {*uout=out; if (out) {last=uout; out=0;} uout++; cut=0;} + bcd>>=4; + + nibble=bcd & 0x00f; + if (nibble) out=(Unit)(out+nibble*DECPOWERS[cut]); + cut++; + if (cut==DECDPUN) {*uout=out; if (out) {last=uout; out=0;} uout++; cut=0;} + } /* n */ + if (cut!=0) { /* some more left over */ + *uout=out; /* write out final unit */ + if (out) last=uout; /* and note if non-zero */ + } + #endif + + /* here, last points to the most significant unit with digits; */ + /* inspect it to get the final digits count -- this is essentially */ + /* the same code as decGetDigits in decNumber.c */ + dn->digits=(last-dn->lsu)*DECDPUN+1; /* floor of digits, plus */ + /* must be at least 1 digit */ + #if DECDPUN>1 + if (*last<10) return; /* common odd digit or 0 */ + dn->digits++; /* must be 2 at least */ + #if DECDPUN>2 + if (*last<100) return; /* 10-99 */ + dn->digits++; /* must be 3 at least */ + #if DECDPUN>3 + if (*last<1000) return; /* 100-999 */ + dn->digits++; /* must be 4 at least */ + #if DECDPUN>4 + for (pow=&DECPOWERS[4]; *last>=*pow; pow++) dn->digits++; + #endif + #endif + #endif + #endif + return; + } /*decDigitsFromDPD */ diff --git a/libdecnumber/dpd/decimal64.h b/libdecnumber/dpd/decimal64.h new file mode 100644 index 0000000..549b626 --- /dev/null +++ b/libdecnumber/dpd/decimal64.h @@ -0,0 +1,101 @@ +/* Decimal 64-bit format module header for the decNumber C Library. + Copyright (C) 2005, 2007 Free Software Foundation, Inc. + Contributed by IBM Corporation. Author Mike Cowlishaw. + + This file is part of GCC. + + GCC is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License as published by the Free + Software Foundation; either version 2, or (at your option) any later + version. + + In addition to the permissions in the GNU General Public License, + the Free Software Foundation gives you unlimited permission to link + the compiled version of this file into combinations with other + programs, and to distribute those combinations without any + restriction coming from the use of this file. (The General Public + License restrictions do apply in other respects; for example, they + cover modification of the file, and distribution when not linked + into a combine executable.) + + GCC is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License + along with GCC; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. */ + +/* ------------------------------------------------------------------ */ +/* Decimal 64-bit format module header */ +/* ------------------------------------------------------------------ */ + +#if !defined(DECIMAL64) + #define DECIMAL64 + #define DEC64NAME "decimal64" /* Short name */ + #define DEC64FULLNAME "Decimal 64-bit Number" /* Verbose name */ + #define DEC64AUTHOR "Mike Cowlishaw" /* Who to blame */ + + + /* parameters for decimal64s */ + #define DECIMAL64_Bytes 8 /* length */ + #define DECIMAL64_Pmax 16 /* maximum precision (digits) */ + #define DECIMAL64_Emax 384 /* maximum adjusted exponent */ + #define DECIMAL64_Emin -383 /* minimum adjusted exponent */ + #define DECIMAL64_Bias 398 /* bias for the exponent */ + #define DECIMAL64_String 24 /* maximum string length, +1 */ + #define DECIMAL64_EconL 8 /* exp. continuation length */ + /* highest biased exponent (Elimit-1) */ + #define DECIMAL64_Ehigh (DECIMAL64_Emax+DECIMAL64_Bias-DECIMAL64_Pmax+1) + + /* check enough digits, if pre-defined */ + #if defined(DECNUMDIGITS) + #if (DECNUMDIGITS<DECIMAL64_Pmax) + #error decimal64.h needs pre-defined DECNUMDIGITS>=16 for safe use + #endif + #endif + + + #ifndef DECNUMDIGITS + #define DECNUMDIGITS DECIMAL64_Pmax /* size if not already defined*/ + #endif + #ifndef DECNUMBER + #include "decNumber.h" /* context and number library */ + #endif + + /* Decimal 64-bit type, accessible by bytes */ + typedef struct { + uint8_t bytes[DECIMAL64_Bytes]; /* decimal64: 1, 5, 8, 50 bits*/ + } decimal64; + + /* special values [top byte excluding sign bit; last two bits are */ + /* don't-care for Infinity on input, last bit don't-care for NaN] */ + #if !defined(DECIMAL_NaN) + #define DECIMAL_NaN 0x7c /* 0 11111 00 NaN */ + #define DECIMAL_sNaN 0x7e /* 0 11111 10 sNaN */ + #define DECIMAL_Inf 0x78 /* 0 11110 00 Infinity */ + #endif + + /* ---------------------------------------------------------------- */ + /* Routines */ + /* ---------------------------------------------------------------- */ + + #include "decimal64Symbols.h" + + /* String conversions */ + decimal64 * decimal64FromString(decimal64 *, const char *, decContext *); + char * decimal64ToString(const decimal64 *, char *); + char * decimal64ToEngString(const decimal64 *, char *); + + /* decNumber conversions */ + decimal64 * decimal64FromNumber(decimal64 *, const decNumber *, + decContext *); + decNumber * decimal64ToNumber(const decimal64 *, decNumber *); + + /* Format-dependent utilities */ + uint32_t decimal64IsCanonical(const decimal64 *); + decimal64 * decimal64Canonical(decimal64 *, const decimal64 *); + +#endif diff --git a/libdecnumber/dpd/decimal64Symbols.h b/libdecnumber/dpd/decimal64Symbols.h new file mode 100644 index 0000000..cf965bf --- /dev/null +++ b/libdecnumber/dpd/decimal64Symbols.h @@ -0,0 +1,16 @@ +#if !defined(DECIMAL64SYMBOLS) +#define DECIMAL64SYMBOLS + +#ifdef IN_LIBGCC2 +#define decDigitsFromDPD __decDigitsFromDPD +#define decDigitsToDPD __decDigitsToDPD +#define decimal64Canonical __decimal64Canonical +#define decimal64FromNumber __decimal64FromNumber +#define decimal64FromString __decimal64FromString +#define decimal64IsCanonical __decimal64IsCanonical +#define decimal64ToEngString __decimal64ToEngString +#define decimal64ToNumber __decimal64ToNumber +#define decimal64ToString __decimal64ToString +#endif + +#endif diff --git a/src-release b/src-release index 98fa4f4..8b31442 100644 --- a/src-release +++ b/src-release @@ -271,7 +271,7 @@ gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)" .PHONY: gdb.tar.bz2 -GDB_SUPPORT_DIRS= bfd include libiberty opcodes readline sim intl +GDB_SUPPORT_DIRS= bfd include libiberty opcodes readline sim intl libdecnumber gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb $(MAKE) -f $(SELF) gdb-taz TOOL=gdb \ MD5PROG="$(MD5PROG)" \ |