* texinfo/texinfo.tex: Update to version 2009-03-28.05.

1 files changed, 3324 insertions, 964 deletions

diff --git a/texinfo/texinfo.tex b/texinfo/texinfo.tex
index 6f322ea..23a30bc 100644
--- a/texinfo/texinfo.tex
+++ b/texinfo/texinfo.tex
@@ -3,16 +3,16 @@
 % Load plain if necessary, i.e., if running under initex.
 \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
 %
-\def\texinfoversion{2004-02-19.09}
+\def\texinfoversion{2009-03-28.05}
 %
-% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
-% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software
-% Foundation, Inc.
+% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
+% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
+% 2007, 2008, 2009 Free Software Foundation, Inc.
 %
-% This texinfo.tex file is free software; you can redistribute it and/or
+% This texinfo.tex file is free software: you can redistribute it and/or
 % modify it under the terms of the GNU General Public License as
-% published by the Free Software Foundation; either version 2, or (at
-% your option) any later version.
+% published by the Free Software Foundation, either version 3 of the
+% License, or (at your option) any later version.
 %
 % This texinfo.tex file is distributed in the hope that it will be
 % useful, but WITHOUT ANY WARRANTY; without even the implied warranty
@@ -20,14 +20,12 @@
 % General Public License for more details.
 %
 % You should have received a copy of the GNU General Public License
-% along with this texinfo.tex file; see the file COPYING.  If not, write
-% to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-% Boston, MA 02111-1307, USA.
+% along with this program.  If not, see <http://www.gnu.org/licenses/>.
 %
 % As a special exception, when this file is read by TeX when processing
 % a Texinfo source document, you may use the result without
 % restriction.  (This has been our intent since Texinfo was invented.)
-% 
+%
 % Please try the latest version of texinfo.tex before submitting bug
 % reports; you can get the latest version from:
 %   http://www.gnu.org/software/texinfo/ (the Texinfo home page), or
@@ -55,7 +53,7 @@
 % It is possible to adapt texinfo.tex for other languages, to some
 % extent.  You can get the existing language-specific files from the
 % full Texinfo distribution.
-% 
+%
 % The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
 
 
@@ -67,7 +65,7 @@
 \everyjob{\message{[Texinfo version \texinfoversion]}%
   \catcode`+=\active \catcode`\_=\active}
 
-\message{Basics,}
+
 \chardef\other=12
 
 % We never want plain's \outer definition of \+ in Texinfo.
@@ -89,15 +87,20 @@
 \let\ptexhat=^
 \let\ptexi=\i
 \let\ptexindent=\indent
-\let\ptexnoindent=\noindent
 \let\ptexinsert=\insert
 \let\ptexlbrace=\{
 \let\ptexless=<
+\let\ptexnewwrite\newwrite
+\let\ptexnoindent=\noindent
 \let\ptexplus=+
 \let\ptexrbrace=\}
 \let\ptexslash=\/
 \let\ptexstar=\*
 \let\ptext=\t
+\let\ptextop=\top
+{\catcode`\'=\active
+\global\let\ptexquoteright'}% Math-mode def from plain.tex.
+\let\ptexraggedright=\raggedright
 
 % If this character appears in an error message or help string, it
 % starts a new line in the output.
@@ -152,20 +155,22 @@
 \ifx\putwordDefopt\undefined    \gdef\putwordDefopt{User Option}\fi
 \ifx\putwordDeffunc\undefined   \gdef\putwordDeffunc{Function}\fi
 
-% In some macros, we cannot use the `\? notation---the left quote is
-% in some cases the escape char.
+% Since the category of space is not known, we have to be careful.
+\chardef\spacecat = 10
+\def\spaceisspace{\catcode`\ =\spacecat}
+
+% sometimes characters are active, so we need control sequences.
 \chardef\colonChar = `\:
 \chardef\commaChar = `\,
+\chardef\dashChar  = `\-
 \chardef\dotChar   = `\.
 \chardef\exclamChar= `\!
+\chardef\lquoteChar= `\`
 \chardef\questChar = `\?
+\chardef\rquoteChar= `\'
 \chardef\semiChar  = `\;
 \chardef\underChar = `\_
 
-\chardef\spaceChar = `\ %
-\chardef\spacecat = 10
-\def\spaceisspace{\catcode\spaceChar=\spacecat}
-
 % Ignore a token.
 %
 \def\gobble#1{}
@@ -175,10 +180,12 @@
 
 % Hyphenation fixes.
 \hyphenation{
-  Flor-i-da Ghost-script Ghost-view Mac-OS ap-pen-dix bit-map bit-maps
+  Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script
+  ap-pen-dix bit-map bit-maps
   data-base data-bases eshell fall-ing half-way long-est man-u-script
   man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm
-  par-a-digms rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces
+  par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces
+  spell-ing spell-ings
   stand-alone strong-est time-stamp time-stamps which-ever white-space
   wide-spread wrap-around
 }
@@ -274,6 +281,50 @@
 \newdimen\cornerthick \cornerthick=.3pt
 \newdimen\topandbottommargin \topandbottommargin=.75in
 
+% Output a mark which sets \thischapter, \thissection and \thiscolor.
+% We dump everything together because we only have one kind of mark.
+% This works because we only use \botmark / \topmark, not \firstmark.
+%
+% A mark contains a subexpression of the \ifcase ... \fi construct.
+% \get*marks macros below extract the needed part using \ifcase.
+%
+% Another complication is to let the user choose whether \thischapter
+% (\thissection) refers to the chapter (section) in effect at the top
+% of a page, or that at the bottom of a page.  The solution is
+% described on page 260 of The TeXbook.  It involves outputting two
+% marks for the sectioning macros, one before the section break, and
+% one after.  I won't pretend I can describe this better than DEK...
+\def\domark{%
+  \toks0=\expandafter{\lastchapterdefs}%
+  \toks2=\expandafter{\lastsectiondefs}%
+  \toks4=\expandafter{\prevchapterdefs}%
+  \toks6=\expandafter{\prevsectiondefs}%
+  \toks8=\expandafter{\lastcolordefs}%
+  \mark{%
+                   \the\toks0 \the\toks2
+      \noexpand\or \the\toks4 \the\toks6
+    \noexpand\else \the\toks8
+  }%
+}
+% \topmark doesn't work for the very first chapter (after the title
+% page or the contents), so we use \firstmark there -- this gets us
+% the mark with the chapter defs, unless the user sneaks in, e.g.,
+% @setcolor (or @url, or @link, etc.) between @contents and the very
+% first @chapter.
+\def\gettopheadingmarks{%
+  \ifcase0\topmark\fi
+  \ifx\thischapter\empty \ifcase0\firstmark\fi \fi
+}
+\def\getbottomheadingmarks{\ifcase1\botmark\fi}
+\def\getcolormarks{\ifcase2\topmark\fi}
+
+% Avoid "undefined control sequence" errors.
+\def\lastchapterdefs{}
+\def\lastsectiondefs{}
+\def\prevchapterdefs{}
+\def\prevsectiondefs{}
+\def\lastcolordefs{}
+
 % Main output routine.
 \chardef\PAGE = 255
 \output = {\onepageout{\pagecontents\PAGE}}
@@ -291,7 +342,9 @@
   %
   % Do this outside of the \shipout so @code etc. will be expanded in
   % the headline as they should be, not taken literally (outputting ''code).
+  \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi
   \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
+  \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi
   \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
   %
   {%
@@ -299,10 +352,14 @@
     % take effect in \write's, yet the group defined by the \vbox ends
     % before the \shipout runs.
     %
-    \escapechar = `\\     % use backslash in output files.
     \indexdummies         % don't expand commands in the output.
     \normalturnoffactive  % \ in index entries must not stay \, e.g., if
-                   % the page break happens to be in the middle of an example.
+               % the page break happens to be in the middle of an example.
+               % We don't want .vr (or whatever) entries like this:
+               % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}}
+               % "\acronym" won't work when it's read back in;
+               % it needs to be
+               % {\code {{\tt \backslashcurfont }acronym}
     \shipout\vbox{%
       % Do this early so pdf references go to the beginning of the page.
       \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
@@ -330,9 +387,9 @@
       \pagebody{#1}%
       \ifdim\ht\footlinebox > 0pt
         % Only leave this space if the footline is nonempty.
-        % (We lessened \vsize for it in \oddfootingxxx.)
+        % (We lessened \vsize for it in \oddfootingyyy.)
         % The \baselineskip=24pt in plain's \makefootline has no effect.
-        \vskip 2\baselineskip
+        \vskip 24pt
         \unvbox\footlinebox
       \fi
       %
@@ -353,7 +410,7 @@
       \egroup % \vbox from first cropmarks clause
       \fi
     }% end of \shipout\vbox
-  }% end of group with \normalturnoffactive
+  }% end of group with \indexdummies
   \advancepageno
   \ifnum\outputpenalty>-20000 \else\dosupereject\fi
 }
@@ -366,7 +423,7 @@
 % marginal hacks, juha@viisa.uucp (Juha Takala)
 \ifvoid\margin\else % marginal info is present
   \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
-\dimen@=\dp#1 \unvbox#1
+\dimen@=\dp#1\relax \unvbox#1\relax
 \ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
 \ifr@ggedbottom \kern-\dimen@ \vfil \fi}
 }
@@ -388,7 +445,7 @@
 %
 \def\parsearg{\parseargusing{}}
 \def\parseargusing#1#2{%
-  \def\next{#2}%
+  \def\argtorun{#2}%
   \begingroup
     \obeylines
     \spaceisspace
@@ -407,7 +464,7 @@
 \def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
 \def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
 
-% Each occurence of `\^^M' or `<space>\^^M' is replaced by a single space.
+% Each occurrence of `\^^M' or `<space>\^^M' is replaced by a single space.
 %
 % \argremovec might leave us with trailing space, e.g.,
 %    @end itemize  @c foo
@@ -419,8 +476,7 @@
 \def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{%
   \def\temp{#3}%
   \ifx\temp\empty
-    % We cannot use \next here, as it holds the macro to run;
-    % thus we reuse \temp.
+    % Do not use \next, perhaps the caller of \parsearg uses it; reuse \temp:
     \let\temp\finishparsearg
   \else
     \let\temp\argcheckspaces
@@ -432,14 +488,14 @@
 % If a _delimited_ argument is enclosed in braces, they get stripped; so
 % to get _exactly_ the rest of the line, we had to prevent such situation.
 % We prepended an \empty token at the very beginning and we expand it now,
-% just before passing the control to \next.
-% (Similarily, we have to think about #3 of \argcheckspacesY above: it is
+% just before passing the control to \argtorun.
+% (Similarly, we have to think about #3 of \argcheckspacesY above: it is
 % either the null string, or it ends with \^^M---thus there is no danger
 % that a pair of braces would be stripped.
 %
 % But first, we have to remove the trailing space token.
 %
-\def\finishparsearg#1 \ArgTerm{\expandafter\next\expandafter{#1}}
+\def\finishparsearg#1 \ArgTerm{\expandafter\argtorun\expandafter{#1}}
 
 % \parseargdef\foo{...}
 %	is roughly equivalent to
@@ -479,23 +535,23 @@
 \def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
 
 % Define the framework for environments in texinfo.tex.  It's used like this:
-% 
+%
 %   \envdef\foo{...}
 %   \def\Efoo{...}
-%   
+%
 % It's the responsibility of \envdef to insert \begingroup before the
 % actual body; @end closes the group after calling \Efoo.  \envdef also
 % defines \thisenv, so the current environment is known; @end checks
 % whether the environment name matches.  The \checkenv macro can also be
 % used to check whether the current environment is the one expected.
-% 
+%
 % Non-false conditionals (@iftex, @ifset) don't fit into this, so they
-% are not treated as enviroments; they don't open a group.  (The
+% are not treated as environments; they don't open a group.  (The
 % implementation of @end takes care not to call \endgroup in this
 % special case.)
 
 
-% At runtime, environments start with this:
+% At run-time, environments start with this:
 \def\startenvironment#1{\begingroup\def\thisenv{#1}}
 % initialize
 \let\thisenv\empty
@@ -513,7 +569,7 @@
   \fi
 }
 
-% Evironment mismatch, #1 expected:
+% Environment mismatch, #1 expected:
 \def\badenverr{%
   \errhelp = \EMsimple
   \errmessage{This command can appear only \inenvironment\temp,
@@ -563,7 +619,7 @@
 \let\}=\myrbrace
 \begingroup
   % Definitions to produce \{ and \} commands for indices,
-  % and @{ and @} for the aux file.
+  % and @{ and @} for the aux/toc files.
   \catcode`\{ = \other \catcode`\} = \other
   \catcode`\[ = 1 \catcode`\] = 2
   \catcode`\! = 0 \catcode`\\ = \other
@@ -597,23 +653,23 @@
 \def\jmacro{j}
 \def\dotless#1{%
   \def\temp{#1}%
-  \ifx\temp\imacro \ptexi
-  \else\ifx\temp\jmacro \j
+  \ifx\temp\imacro \ifmmode\imath \else\ptexi \fi
+  \else\ifx\temp\jmacro \ifmmode\jmath \else\j \fi
   \else \errmessage{@dotless can be used only with i or j}%
   \fi\fi
 }
 
 % The \TeX{} logo, as in plain, but resetting the spacing so that a
 % period following counts as ending a sentence.  (Idea found in latex.)
-% 
-\edef\TeX{\TeX \spacefactor=3000 }
+%
+\edef\TeX{\TeX \spacefactor=1000 }
 
 % @LaTeX{} logo.  Not quite the same results as the definition in
 % latex.ltx, since we use a different font for the raised A; it's most
 % convenient for us to use an explicitly smaller font, rather than using
 % the \scriptstyle font (since we don't reset \scriptstyle and
 % \scriptscriptstyle).
-% 
+%
 \def\LaTeX{%
   L\kern-.36em
   {\setbox0=\hbox{T}%
@@ -644,13 +700,28 @@
 \let\/=\allowbreak
 
 % @. is an end-of-sentence period.
-\def\.{.\spacefactor=3000 }
+\def\.{.\spacefactor=\endofsentencespacefactor\space}
 
 % @! is an end-of-sentence bang.
-\def\!{!\spacefactor=3000 }
+\def\!{!\spacefactor=\endofsentencespacefactor\space}
 
 % @? is an end-of-sentence query.
-\def\?{?\spacefactor=3000 }
+\def\?{?\spacefactor=\endofsentencespacefactor\space}
+
+% @frenchspacing on|off  says whether to put extra space after punctuation.
+%
+\def\onword{on}
+\def\offword{off}
+%
+\parseargdef\frenchspacing{%
+  \def\temp{#1}%
+  \ifx\temp\onword \plainfrenchspacing
+  \else\ifx\temp\offword \plainnonfrenchspacing
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @frenchspacing option `\temp', must be on/off}%
+  \fi\fi
+}
 
 % @w prevents a word break.  Without the \leavevmode, @w at the
 % beginning of a paragraph, when TeX is still in vertical mode, would
@@ -849,15 +920,20 @@ where each line of input produces a line of output.}
   \temp
 }
 
-% @include file    insert text of that file as input.
+% @include FILE -- \input text of FILE.
 %
 \def\include{\parseargusing\filenamecatcodes\includezzz}
 \def\includezzz#1{%
   \pushthisfilestack
   \def\thisfile{#1}%
   {%
-    \makevalueexpandable
-    \def\temp{\input #1 }%
+    \makevalueexpandable  % we want to expand any @value in FILE.
+    \turnoffactive        % and allow special characters in the expansion
+    \indexnofonts         % Allow `@@' and other weird things in file names.
+    \edef\temp{\noexpand\input #1 }%
+    %
+    % This trickery is to read FILE outside of a group, in case it makes
+    % definitions, etc.
     \expandafter
   }\temp
   \popthisfilestack
@@ -872,6 +948,8 @@ where each line of input produces a line of output.}
   \catcode`>=\other
   \catcode`+=\other
   \catcode`-=\other
+  \catcode`\`=\other
+  \catcode`\'=\other
 }
 
 \def\pushthisfilestack{%
@@ -1028,9 +1106,9 @@ where each line of input produces a line of output.}
 % _ active, and distinguish by seeing if the current family is \slfam,
 % which is what @var uses.
 {
-  \catcode\underChar = \active
+  \catcode`\_ = \active
   \gdef\mathunderscore{%
-    \catcode\underChar=\active
+    \catcode`\_=\active
     \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
   }
 }
@@ -1047,6 +1125,16 @@ where each line of input produces a line of output.}
   \mathunderscore
   \let\\ = \mathbackslash
   \mathactive
+  % make the texinfo accent commands work in math mode
+  \let\"=\ddot
+  \let\'=\acute
+  \let\==\bar
+  \let\^=\hat
+  \let\`=\grave
+  \let\u=\breve
+  \let\v=\check
+  \let\~=\tilde
+  \let\dotaccent=\dot
   $\finishmath
 }
 \def\finishmath#1{#1$\endgroup}  % Close the group opened by \tex.
@@ -1060,28 +1148,41 @@ where each line of input produces a line of output.}
   \catcode`< = \active
   \catcode`> = \active
   \catcode`+ = \active
+  \catcode`' = \active
   \gdef\mathactive{%
     \let^ = \ptexhat
     \let< = \ptexless
     \let> = \ptexgtr
     \let+ = \ptexplus
+    \let' = \ptexquoteright
   }
 }
 
-% @bullet and @minus need the same treatment as @math, just above.
+% Some math mode symbols.
 \def\bullet{$\ptexbullet$}
-\def\minus{$-$}
+\def\geq{\ifmmode \ge\else $\ge$\fi}
+\def\leq{\ifmmode \le\else $\le$\fi}
+\def\minus{\ifmmode -\else $-$\fi}
 
 % @dots{} outputs an ellipsis using the current font.
-% We do .5em per period so that it has the same spacing in a typewriter
-% font as three actual period characters.
+% We do .5em per period so that it has the same spacing in the cm
+% typewriter fonts as three actual period characters; on the other hand,
+% in other typewriter fonts three periods are wider than 1.5em.  So do
+% whichever is larger.
 %
 \def\dots{%
   \leavevmode
-  \hbox to 1.5em{%
-    \hskip 0pt plus 0.25fil
-    .\hfil.\hfil.%
-    \hskip 0pt plus 0.5fil
+  \setbox0=\hbox{...}% get width of three periods
+  \ifdim\wd0 > 1.5em
+    \dimen0 = \wd0
+  \else
+    \dimen0 = 1.5em
+  \fi
+  \hbox to \dimen0{%
+    \hskip 0pt plus.25fil
+    .\hskip 0pt plus1fil
+    .\hskip 0pt plus1fil
+    .\hskip 0pt plus.5fil
   }%
 }
 
@@ -1089,12 +1190,12 @@ where each line of input produces a line of output.}
 %
 \def\enddots{%
   \dots
-  \spacefactor=3000
+  \spacefactor=\endofsentencespacefactor
 }
 
 % @comma{} is so commas can be inserted into text without messing up
 % Texinfo's parsing.
-% 
+%
 \let\comma = ,
 
 % @refill is a no-op.
@@ -1160,48 +1261,192 @@ where each line of input produces a line of output.}
 \newif\ifpdf
 \newif\ifpdfmakepagedest
 
+% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1
+% can be set).  So we test for \relax and 0 as well as \undefined,
+% borrowed from ifpdf.sty.
 \ifx\pdfoutput\undefined
-  \pdffalse
-  \let\pdfmkdest = \gobble
-  \let\pdfurl = \gobble
-  \let\endlink = \relax
-  \let\linkcolor = \relax
-  \let\pdfmakeoutlines = \relax
 \else
-  \pdftrue
-  \pdfoutput = 1
-  \input pdfcolor
-  \pdfcatalog{/PageMode /UseOutlines}%
+  \ifx\pdfoutput\relax
+  \else
+    \ifcase\pdfoutput
+    \else
+      \pdftrue
+    \fi
+  \fi
+\fi
+
+% PDF uses PostScript string constants for the names of xref targets,
+% for display in the outlines, and in other places.  Thus, we have to
+% double any backslashes.  Otherwise, a name like "\node" will be
+% interpreted as a newline (\n), followed by o, d, e.  Not good.
+% http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html
+% (and related messages, the final outcome is that it is up to the TeX
+% user to double the backslashes and otherwise make the string valid, so
+% that's what we do).
+
+% double active backslashes.
+%
+{\catcode`\@=0 \catcode`\\=\active
+ @gdef@activebackslashdouble{%
+   @catcode`@\=@active
+   @let\=@doublebackslash}
+}
+
+% To handle parens, we must adopt a different approach, since parens are
+% not active characters.  hyperref.dtx (which has the same problem as
+% us) handles it with this amazing macro to replace tokens, with minor
+% changes for Texinfo.  It is included here under the GPL by permission
+% from the author, Heiko Oberdiek.
+%
+% #1 is the tokens to replace.
+% #2 is the replacement.
+% #3 is the control sequence with the string.
+%
+\def\HyPsdSubst#1#2#3{%
+  \def\HyPsdReplace##1#1##2\END{%
+    ##1%
+    \ifx\\##2\\%
+    \else
+      #2%
+      \HyReturnAfterFi{%
+        \HyPsdReplace##2\END
+      }%
+    \fi
+  }%
+  \xdef#3{\expandafter\HyPsdReplace#3#1\END}%
+}
+\long\def\HyReturnAfterFi#1\fi{\fi#1}
+
+% #1 is a control sequence in which to do the replacements.
+\def\backslashparens#1{%
+  \xdef#1{#1}% redefine it as its expansion; the definition is simply
+             % \lastnode when called from \setref -> \pdfmkdest.
+  \HyPsdSubst{(}{\realbackslash(}{#1}%
+  \HyPsdSubst{)}{\realbackslash)}{#1}%
+}
+
+\newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images
+with PDF output, and none of those formats could be found.  (.eps cannot
+be supported due to the design of the PDF format; use regular TeX (DVI
+output) for that.)}
+
+\ifpdf
+  %
+  % Color manipulation macros based on pdfcolor.tex.
+  \def\cmykDarkRed{0.28 1 1 0.35}
+  \def\cmykBlack{0 0 0 1}
+  %
+  % k sets the color for filling (usual text, etc.);
+  % K sets the color for stroking (thin rules, e.g., normal _'s).
+  \def\pdfsetcolor#1{\pdfliteral{#1 k  #1 K}}
+  %
+  % Set color, and create a mark which defines \thiscolor accordingly,
+  % so that \makeheadline knows which color to restore.
+  \def\setcolor#1{%
+    \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}%
+    \domark
+    \pdfsetcolor{#1}%
+  }
+  %
+  \def\maincolor{\cmykBlack}
+  \pdfsetcolor{\maincolor}
+  \edef\thiscolor{\maincolor}
+  \def\lastcolordefs{}
+  %
+  \def\makefootline{%
+    \baselineskip24pt
+    \line{\pdfsetcolor{\maincolor}\the\footline}%
+  }
+  %
+  \def\makeheadline{%
+    \vbox to 0pt{%
+      \vskip-22.5pt
+      \line{%
+        \vbox to8.5pt{}%
+        % Extract \thiscolor definition from the marks.
+        \getcolormarks
+        % Typeset the headline with \maincolor, then restore the color.
+        \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\thiscolor}%
+      }%
+      \vss
+    }%
+    \nointerlineskip
+  }
+  %
+  %
+  \pdfcatalog{/PageMode /UseOutlines}
+  %
+  % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
   \def\dopdfimage#1#2#3{%
-    \def\imagewidth{#2}%
-    \def\imageheight{#3}%
-    % without \immediate, pdftex seg faults when the same image is
+    \def\imagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
+    \def\imageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
+    %
+    % pdftex (and the PDF format) support .png, .jpg, .pdf (among
+    % others).  Let's try in that order.
+    \let\pdfimgext=\empty
+    \begingroup
+      \openin 1 #1.png \ifeof 1
+        \openin 1 #1.jpg \ifeof 1
+          \openin 1 #1.jpeg \ifeof 1
+            \openin 1 #1.JPG \ifeof 1
+              \openin 1 #1.pdf \ifeof 1
+                \openin 1 #1.PDF \ifeof 1
+                  \errhelp = \nopdfimagehelp
+                  \errmessage{Could not find image file #1 for pdf}%
+                \else \gdef\pdfimgext{PDF}%
+                \fi
+              \else \gdef\pdfimgext{pdf}%
+              \fi
+            \else \gdef\pdfimgext{JPG}%
+            \fi
+          \else \gdef\pdfimgext{jpeg}%
+          \fi
+        \else \gdef\pdfimgext{jpg}%
+        \fi
+      \else \gdef\pdfimgext{png}%
+      \fi
+      \closein 1
+    \endgroup
+    %
+    % without \immediate, ancient pdftex seg faults when the same image is
     % included twice.  (Version 3.14159-pre-1.0-unofficial-20010704.)
     \ifnum\pdftexversion < 14
       \immediate\pdfimage
     \else
       \immediate\pdfximage
     \fi
-      \ifx\empty\imagewidth\else width \imagewidth \fi
-      \ifx\empty\imageheight\else height \imageheight \fi
+      \ifdim \wd0 >0pt width \imagewidth \fi
+      \ifdim \wd2 >0pt height \imageheight \fi
       \ifnum\pdftexversion<13
-         #1.pdf%
+         #1.\pdfimgext
        \else
-         {#1.pdf}%
+         {#1.\pdfimgext}%
        \fi
     \ifnum\pdftexversion < 14 \else
       \pdfrefximage \pdflastximage
     \fi}
+  %
   \def\pdfmkdest#1{{%
-    % We have to set dummies so commands such as @code in a section title
-    % aren't expanded.
-    \atdummies
-    \normalturnoffactive
-    \pdfdest name{#1} xyz%
+    % We have to set dummies so commands such as @code, and characters
+    % such as \, aren't expanded when present in a section title.
+    \indexnofonts
+    \turnoffactive
+    \activebackslashdouble
+    \makevalueexpandable
+    \def\pdfdestname{#1}%
+    \backslashparens\pdfdestname
+    \safewhatsit{\pdfdest name{\pdfdestname} xyz}%
   }}
+  %
+  % used to mark target names; must be expandable.
   \def\pdfmkpgn#1{#1}
-  \let\linkcolor = \Blue  % was Cyan, but that seems light?
-  \def\endlink{\Black\pdfendlink}
+  %
+  % by default, use a color that is dark enough to print on paper as
+  % nearly black, but still distinguishable for online viewing.
+  \def\urlcolor{\cmykDarkRed}
+  \def\linkcolor{\cmykDarkRed}
+  \def\endlink{\setcolor{\maincolor}\pdfendlink}
+  %
   % Adding outlines to PDF; macros for calculating structure of outlines
   % come from Petr Olsak
   \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
@@ -1210,20 +1455,31 @@ where each line of input produces a line of output.}
     \advance\tempnum by 1
     \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
   %
-  % #1 is the section text.  #2 is the pdf expression for the number
-  % of subentries (or empty, for subsubsections).  #3 is the node
-  % text, which might be empty if this toc entry had no
-  % corresponding node.  #4 is the page number.
-  % 
+  % #1 is the section text, which is what will be displayed in the
+  % outline by the pdf viewer.  #2 is the pdf expression for the number
+  % of subentries (or empty, for subsubsections).  #3 is the node text,
+  % which might be empty if this toc entry had no corresponding node.
+  % #4 is the page number
+  %
   \def\dopdfoutline#1#2#3#4{%
     % Generate a link to the node text if that exists; else, use the
     % page number.  We could generate a destination for the section
     % text in the case where a section has no node, but it doesn't
-    % seem worthwhile, since most documents are normally structured.
+    % seem worth the trouble, since most documents are normally structured.
     \def\pdfoutlinedest{#3}%
-    \ifx\pdfoutlinedest\empty \def\pdfoutlinedest{#4}\fi
+    \ifx\pdfoutlinedest\empty
+      \def\pdfoutlinedest{#4}%
+    \else
+      % Doubled backslashes in the name.
+      {\activebackslashdouble \xdef\pdfoutlinedest{#3}%
+       \backslashparens\pdfoutlinedest}%
+    \fi
+    %
+    % Also double the backslashes in the display string.
+    {\activebackslashdouble \xdef\pdfoutlinetext{#1}%
+     \backslashparens\pdfoutlinetext}%
     %
-    \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{#1}%
+    \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}%
   }
   %
   \def\pdfmakeoutlines{%
@@ -1235,13 +1491,13 @@ where each line of input produces a line of output.}
       % Read toc silently, to get counts of subentries for \pdfoutline.
       \def\numchapentry##1##2##3##4{%
 	\def\thischapnum{##2}%
-	\let\thissecnum\empty
-	\let\thissubsecnum\empty
+	\def\thissecnum{0}%
+	\def\thissubsecnum{0}%
       }%
       \def\numsecentry##1##2##3##4{%
 	\advancenumber{chap\thischapnum}%
 	\def\thissecnum{##2}%
-	\let\thissubsecnum\empty
+	\def\thissubsecnum{0}%
       }%
       \def\numsubsecentry##1##2##3##4{%
 	\advancenumber{sec\thissecnum}%
@@ -1250,9 +1506,9 @@ where each line of input produces a line of output.}
       \def\numsubsubsecentry##1##2##3##4{%
 	\advancenumber{subsec\thissubsecnum}%
       }%
-      \let\thischapnum\empty
-      \let\thissecnum\empty
-      \let\thissubsecnum\empty
+      \def\thischapnum{0}%
+      \def\thissecnum{0}%
+      \def\thissubsecnum{0}%
       %
       % use \def rather than \let here because we redefine \chapentry et
       % al. a second time, below.
@@ -1264,12 +1520,12 @@ where each line of input produces a line of output.}
       \def\unnsecentry{\numsecentry}%
       \def\unnsubsecentry{\numsubsecentry}%
       \def\unnsubsubsecentry{\numsubsubsecentry}%
-      \input \jobname.toc
+      \readdatafile{toc}%
       %
       % Read toc second time, this time actually producing the outlines.
       % The `-' means take the \expnumber as the absolute number of
       % subentries, which we calculated on our first read of the .toc above.
-      % 
+      %
       % We use the node names as the destinations.
       \def\numchapentry##1##2##3##4{%
         \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}%
@@ -1285,46 +1541,17 @@ where each line of input produces a line of output.}
       % since the encoding is unknown.  For example, the eogonek from
       % Latin 2 (0xea) gets translated to a | character.  Info from
       % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100.
-      % 
+      %
       % xx to do this right, we have to translate 8-bit characters to
       % their "best" equivalent, based on the @documentencoding.  Right
       % now, I guess we'll just let the pdf reader have its way.
       \indexnofonts
-      \turnoffactive
-      \input \jobname.toc
+      \setupdatafile
+      \catcode`\\=\active \otherbackslash
+      \input \tocreadfilename
     \endgroup
   }
   %
-  \def\makelinks #1,{%
-    \def\params{#1}\def\E{END}%
-    \ifx\params\E
-      \let\nextmakelinks=\relax
-    \else
-      \let\nextmakelinks=\makelinks
-      \ifnum\lnkcount>0,\fi
-      \picknum{#1}%
-      \startlink attr{/Border [0 0 0]}
-        goto name{\pdfmkpgn{\the\pgn}}%
-      \linkcolor #1%
-      \advance\lnkcount by 1%
-      \endlink
-    \fi
-    \nextmakelinks
-  }
-  \def\picknum#1{\expandafter\pn#1}
-  \def\pn#1{%
-    \def\p{#1}%
-    \ifx\p\lbrace
-      \let\nextpn=\ppn
-    \else
-      \let\nextpn=\ppnn
-      \def\first{#1}
-    \fi
-    \nextpn
-  }
-  \def\ppn#1{\pgn=#1\gobble}
-  \def\ppnn{\pgn=\first}
-  \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,}
   \def\skipspaces#1{\def\PP{#1}\def\D{|}%
     \ifx\PP\D\let\nextsp\relax
     \else\let\nextsp\skipspaces
@@ -1339,11 +1566,23 @@ where each line of input produces a line of output.}
   \else
     \let \startlink \pdfstartlink
   \fi
+  % make a live url in pdf output.
   \def\pdfurl#1{%
     \begingroup
-      \normalturnoffactive\def\@{@}%
+      % it seems we really need yet another set of dummies; have not
+      % tried to figure out what each command should do in the context
+      % of @url.  for now, just make @/ a no-op, that's the only one
+      % people have actually reported a problem with.
+      %
+      \normalturnoffactive
+      \def\@{@}%
+      \let\/=\empty
       \makevalueexpandable
-      \leavevmode\Red
+      % do we want to go so far as to use \indexnofonts instead of just
+      % special-casing \var here?
+      \def\var##1{##1}%
+      %
+      \leavevmode\setcolor{\urlcolor}%
       \startlink attr{/Border [0 0 0]}%
         user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
     \endgroup}
@@ -1370,9 +1609,17 @@ where each line of input produces a line of output.}
     {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
   \def\pdflink#1{%
     \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
-    \linkcolor #1\endlink}
+    \setcolor{\linkcolor}#1\endlink}
   \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
-\fi % \ifx\pdfoutput
+\else
+  % non-pdf mode
+  \let\pdfmkdest = \gobble
+  \let\pdfurl = \gobble
+  \let\endlink = \relax
+  \let\setcolor = \gobble
+  \let\pdfsetcolor = \gobble
+  \let\pdfmakeoutlines = \relax
+\fi  % \ifx\pdfoutput
 
 
 \message{fonts,}
@@ -1380,22 +1627,26 @@ where each line of input produces a line of output.}
 % Change the current font style to #1, remembering it in \curfontstyle.
 % For now, we do not accumulate font styles: @b{@i{foo}} prints foo in
 % italics, not bold italics.
-% 
+%
 \def\setfontstyle#1{%
   \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd.
   \csname ten#1\endcsname  % change the current font
 }
 
 % Select #1 fonts with the current style.
-% 
+%
 \def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname}
 
 \def\rm{\fam=0 \setfontstyle{rm}}
 \def\it{\fam=\itfam \setfontstyle{it}}
 \def\sl{\fam=\slfam \setfontstyle{sl}}
-\def\bf{\fam=\bffam \setfontstyle{bf}}
+\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf}
 \def\tt{\fam=\ttfam \setfontstyle{tt}}
 
+% Unfortunately, we have to override this for titles and the like, since
+% in those cases "rm" is bold.  Sigh.
+\def\rmisbold{\rm\def\curfontstyle{bf}}
+
 % Texinfo sort of supports the sans serif font style, which plain TeX does not.
 % So we set up a \sf.
 \newfam\sffam
@@ -1405,6 +1656,7 @@ where each line of input produces a line of output.}
 % We don't need math for this font style.
 \def\ttsl{\setfontstyle{ttsl}}
 
+
 % Default leading.
 \newdimen\textleading  \textleading = 13.2pt
 
@@ -1416,8 +1668,12 @@ where each line of input produces a line of output.}
 \def\strutheightpercent{.70833}
 \def\strutdepthpercent {.29167}
 %
+% can get a sort of poor man's double spacing by redefining this.
+\def\baselinefactor{1}
+%
 \def\setleading#1{%
-  \normalbaselineskip = #1\relax
+  \dimen0 = #1\relax
+  \normalbaselineskip = \baselinefactor\dimen0
   \normallineskip = \lineskipfactor\normalbaselineskip
   \normalbaselines
   \setbox\strutbox =\hbox{%
@@ -1426,10 +1682,279 @@ where each line of input produces a line of output.}
   }%
 }
 
+% PDF CMaps.  See also LaTeX's t1.cmap.
+%
+% do nothing with this by default.
+\expandafter\let\csname cmapOT1\endcsname\gobble
+\expandafter\let\csname cmapOT1IT\endcsname\gobble
+\expandafter\let\csname cmapOT1TT\endcsname\gobble
+
+% if we are producing pdf, and we have \pdffontattr, then define cmaps.
+% (\pdffontattr was introduced many years ago, but people still run
+% older pdftex's; it's easy to conditionalize, so we do.)
+\ifpdf \ifx\pdffontattr\undefined \else
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1-0)
+%%Title: (TeX-OT1-0 TeX OT1 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+8 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<23> <26> <0023>
+<28> <3B> <0028>
+<3F> <5B> <003F>
+<5D> <5E> <005D>
+<61> <7A> <0061>
+<7B> <7C> <2013>
+endbfrange
+40 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <00660066>
+<0C> <00660069>
+<0D> <0066006C>
+<0E> <006600660069>
+<0F> <00660066006C>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<21> <0021>
+<22> <201D>
+<27> <2019>
+<3C> <00A1>
+<3D> <003D>
+<3E> <00BF>
+<5C> <201C>
+<5F> <02D9>
+<60> <2018>
+<7D> <02DD>
+<7E> <007E>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+%
+% \cmapOT1IT
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1IT-0)
+%%Title: (TeX-OT1IT-0 TeX OT1IT 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1IT)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1IT-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+8 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<25> <26> <0025>
+<28> <3B> <0028>
+<3F> <5B> <003F>
+<5D> <5E> <005D>
+<61> <7A> <0061>
+<7B> <7C> <2013>
+endbfrange
+42 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <00660066>
+<0C> <00660069>
+<0D> <0066006C>
+<0E> <006600660069>
+<0F> <00660066006C>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<21> <0021>
+<22> <201D>
+<23> <0023>
+<24> <00A3>
+<27> <2019>
+<3C> <00A1>
+<3D> <003D>
+<3E> <00BF>
+<5C> <201C>
+<5F> <02D9>
+<60> <2018>
+<7D> <02DD>
+<7E> <007E>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1IT\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+%
+% \cmapOT1TT
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1TT-0)
+%%Title: (TeX-OT1TT-0 TeX OT1TT 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1TT)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1TT-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+5 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<21> <26> <0021>
+<28> <5F> <0028>
+<61> <7E> <0061>
+endbfrange
+32 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <2191>
+<0C> <2193>
+<0D> <0027>
+<0E> <00A1>
+<0F> <00BF>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<20> <2423>
+<27> <2019>
+<60> <2018>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1TT\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+\fi\fi
+
+
 % Set the font macro #1 to the font named #2, adding on the
 % specified font prefix (normally `cm').
-% #3 is the font's design size, #4 is a scale factor
-\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
+% #3 is the font's design size, #4 is a scale factor, #5 is the CMap
+% encoding (currently only OT1, OT1IT and OT1TT are allowed, pass
+% empty to omit).
+\def\setfont#1#2#3#4#5{%
+  \font#1=\fontprefix#2#3 scaled #4
+  \csname cmap#5\endcsname#1%
+}
+% This is what gets called when #5 of \setfont is empty.
+\let\cmap\gobble
+% emacs-page end of cmaps
 
 % Use cm as the default font prefix.
 % To specify the font prefix, you must define \fontprefix
@@ -1454,118 +1979,293 @@ where each line of input produces a line of output.}
 \def\scshape{csc}
 \def\scbshape{csc}
 
+% Definitions for a main text size of 11pt.  This is the default in
+% Texinfo.
+%
+\def\definetextfontsizexi{%
 % Text fonts (11.2pt, magstep1).
-\newcount\mainmagstep
-\ifx\bigger\relax
-  % not really supported.
-  \mainmagstep=\magstep1
-  \setfont\textrm\rmshape{12}{1000}
-  \setfont\texttt\ttshape{12}{1000}
-\else
-  \mainmagstep=\magstephalf
-  \setfont\textrm\rmshape{10}{\mainmagstep}
-  \setfont\texttt\ttshape{10}{\mainmagstep}
-\fi
-\setfont\textbf\bfshape{10}{\mainmagstep}
-\setfont\textit\itshape{10}{\mainmagstep}
-\setfont\textsl\slshape{10}{\mainmagstep}
-\setfont\textsf\sfshape{10}{\mainmagstep}
-\setfont\textsc\scshape{10}{\mainmagstep}
-\setfont\textttsl\ttslshape{10}{\mainmagstep}
+\def\textnominalsize{11pt}
+\edef\mainmagstep{\magstephalf}
+\setfont\textrm\rmshape{10}{\mainmagstep}{OT1}
+\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT}
+\setfont\textbf\bfshape{10}{\mainmagstep}{OT1}
+\setfont\textit\itshape{10}{\mainmagstep}{OT1IT}
+\setfont\textsl\slshape{10}{\mainmagstep}{OT1}
+\setfont\textsf\sfshape{10}{\mainmagstep}{OT1}
+\setfont\textsc\scshape{10}{\mainmagstep}{OT1}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT}
 \font\texti=cmmi10 scaled \mainmagstep
 \font\textsy=cmsy10 scaled \mainmagstep
+\def\textecsize{1095}
 
 % A few fonts for @defun names and args.
-\setfont\defbf\bfshape{10}{\magstep1}
-\setfont\deftt\ttshape{10}{\magstep1}
-\setfont\defttsl\ttslshape{10}{\magstep1}
+\setfont\defbf\bfshape{10}{\magstep1}{OT1}
+\setfont\deftt\ttshape{10}{\magstep1}{OT1TT}
+\setfont\defttsl\ttslshape{10}{\magstep1}{OT1TT}
 \def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
 
 % Fonts for indices, footnotes, small examples (9pt).
-\setfont\smallrm\rmshape{9}{1000}
-\setfont\smalltt\ttshape{9}{1000}
-\setfont\smallbf\bfshape{10}{900}
-\setfont\smallit\itshape{9}{1000}
-\setfont\smallsl\slshape{9}{1000}
-\setfont\smallsf\sfshape{9}{1000}
-\setfont\smallsc\scshape{10}{900}
-\setfont\smallttsl\ttslshape{10}{900}
+\def\smallnominalsize{9pt}
+\setfont\smallrm\rmshape{9}{1000}{OT1}
+\setfont\smalltt\ttshape{9}{1000}{OT1TT}
+\setfont\smallbf\bfshape{10}{900}{OT1}
+\setfont\smallit\itshape{9}{1000}{OT1IT}
+\setfont\smallsl\slshape{9}{1000}{OT1}
+\setfont\smallsf\sfshape{9}{1000}{OT1}
+\setfont\smallsc\scshape{10}{900}{OT1}
+\setfont\smallttsl\ttslshape{10}{900}{OT1TT}
 \font\smalli=cmmi9
 \font\smallsy=cmsy9
+\def\smallecsize{0900}
 
 % Fonts for small examples (8pt).
-\setfont\smallerrm\rmshape{8}{1000}
-\setfont\smallertt\ttshape{8}{1000}
-\setfont\smallerbf\bfshape{10}{800}
-\setfont\smallerit\itshape{8}{1000}
-\setfont\smallersl\slshape{8}{1000}
-\setfont\smallersf\sfshape{8}{1000}
-\setfont\smallersc\scshape{10}{800}
-\setfont\smallerttsl\ttslshape{10}{800}
+\def\smallernominalsize{8pt}
+\setfont\smallerrm\rmshape{8}{1000}{OT1}
+\setfont\smallertt\ttshape{8}{1000}{OT1TT}
+\setfont\smallerbf\bfshape{10}{800}{OT1}
+\setfont\smallerit\itshape{8}{1000}{OT1IT}
+\setfont\smallersl\slshape{8}{1000}{OT1}
+\setfont\smallersf\sfshape{8}{1000}{OT1}
+\setfont\smallersc\scshape{10}{800}{OT1}
+\setfont\smallerttsl\ttslshape{10}{800}{OT1TT}
 \font\smalleri=cmmi8
 \font\smallersy=cmsy8
+\def\smallerecsize{0800}
 
 % Fonts for title page (20.4pt):
-\setfont\titlerm\rmbshape{12}{\magstep3}
-\setfont\titleit\itbshape{10}{\magstep4}
-\setfont\titlesl\slbshape{10}{\magstep4}
-\setfont\titlett\ttbshape{12}{\magstep3}
-\setfont\titlettsl\ttslshape{10}{\magstep4}
-\setfont\titlesf\sfbshape{17}{\magstep1}
+\def\titlenominalsize{20pt}
+\setfont\titlerm\rmbshape{12}{\magstep3}{OT1}
+\setfont\titleit\itbshape{10}{\magstep4}{OT1IT}
+\setfont\titlesl\slbshape{10}{\magstep4}{OT1}
+\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT}
+\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT}
+\setfont\titlesf\sfbshape{17}{\magstep1}{OT1}
 \let\titlebf=\titlerm
-\setfont\titlesc\scbshape{10}{\magstep4}
+\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
 \font\titlei=cmmi12 scaled \magstep3
 \font\titlesy=cmsy10 scaled \magstep4
-\def\authorrm{\secrm}
-\def\authortt{\sectt}
+\def\titleecsize{2074}
 
 % Chapter (and unnumbered) fonts (17.28pt).
-\setfont\chaprm\rmbshape{12}{\magstep2}
-\setfont\chapit\itbshape{10}{\magstep3}
-\setfont\chapsl\slbshape{10}{\magstep3}
-\setfont\chaptt\ttbshape{12}{\magstep2}
-\setfont\chapttsl\ttslshape{10}{\magstep3}
-\setfont\chapsf\sfbshape{17}{1000}
+\def\chapnominalsize{17pt}
+\setfont\chaprm\rmbshape{12}{\magstep2}{OT1}
+\setfont\chapit\itbshape{10}{\magstep3}{OT1IT}
+\setfont\chapsl\slbshape{10}{\magstep3}{OT1}
+\setfont\chaptt\ttbshape{12}{\magstep2}{OT1TT}
+\setfont\chapttsl\ttslshape{10}{\magstep3}{OT1TT}
+\setfont\chapsf\sfbshape{17}{1000}{OT1}
 \let\chapbf=\chaprm
-\setfont\chapsc\scbshape{10}{\magstep3}
+\setfont\chapsc\scbshape{10}{\magstep3}{OT1}
 \font\chapi=cmmi12 scaled \magstep2
 \font\chapsy=cmsy10 scaled \magstep3
+\def\chapecsize{1728}
 
 % Section fonts (14.4pt).
-\setfont\secrm\rmbshape{12}{\magstep1}
-\setfont\secit\itbshape{10}{\magstep2}
-\setfont\secsl\slbshape{10}{\magstep2}
-\setfont\sectt\ttbshape{12}{\magstep1}
-\setfont\secttsl\ttslshape{10}{\magstep2}
-\setfont\secsf\sfbshape{12}{\magstep1}
+\def\secnominalsize{14pt}
+\setfont\secrm\rmbshape{12}{\magstep1}{OT1}
+\setfont\secit\itbshape{10}{\magstep2}{OT1IT}
+\setfont\secsl\slbshape{10}{\magstep2}{OT1}
+\setfont\sectt\ttbshape{12}{\magstep1}{OT1TT}
+\setfont\secttsl\ttslshape{10}{\magstep2}{OT1TT}
+\setfont\secsf\sfbshape{12}{\magstep1}{OT1}
 \let\secbf\secrm
-\setfont\secsc\scbshape{10}{\magstep2}
+\setfont\secsc\scbshape{10}{\magstep2}{OT1}
 \font\seci=cmmi12 scaled \magstep1
 \font\secsy=cmsy10 scaled \magstep2
+\def\sececsize{1440}
 
 % Subsection fonts (13.15pt).
-\setfont\ssecrm\rmbshape{12}{\magstephalf}
-\setfont\ssecit\itbshape{10}{1315}
-\setfont\ssecsl\slbshape{10}{1315}
-\setfont\ssectt\ttbshape{12}{\magstephalf}
-\setfont\ssecttsl\ttslshape{10}{1315}
-\setfont\ssecsf\sfbshape{12}{\magstephalf}
+\def\ssecnominalsize{13pt}
+\setfont\ssecrm\rmbshape{12}{\magstephalf}{OT1}
+\setfont\ssecit\itbshape{10}{1315}{OT1IT}
+\setfont\ssecsl\slbshape{10}{1315}{OT1}
+\setfont\ssectt\ttbshape{12}{\magstephalf}{OT1TT}
+\setfont\ssecttsl\ttslshape{10}{1315}{OT1TT}
+\setfont\ssecsf\sfbshape{12}{\magstephalf}{OT1}
 \let\ssecbf\ssecrm
-\setfont\ssecsc\scbshape{10}{1315}
+\setfont\ssecsc\scbshape{10}{1315}{OT1}
 \font\sseci=cmmi12 scaled \magstephalf
 \font\ssecsy=cmsy10 scaled 1315
+\def\ssececsize{1200}
 
 % Reduced fonts for @acro in text (10pt).
-\setfont\reducedrm\rmshape{10}{1000}
-\setfont\reducedtt\ttshape{10}{1000}
-\setfont\reducedbf\bfshape{10}{1000}
-\setfont\reducedit\itshape{10}{1000}
-\setfont\reducedsl\slshape{10}{1000}
-\setfont\reducedsf\sfshape{10}{1000}
-\setfont\reducedsc\scshape{10}{1000}
-\setfont\reducedttsl\ttslshape{10}{1000}
+\def\reducednominalsize{10pt}
+\setfont\reducedrm\rmshape{10}{1000}{OT1}
+\setfont\reducedtt\ttshape{10}{1000}{OT1TT}
+\setfont\reducedbf\bfshape{10}{1000}{OT1}
+\setfont\reducedit\itshape{10}{1000}{OT1IT}
+\setfont\reducedsl\slshape{10}{1000}{OT1}
+\setfont\reducedsf\sfshape{10}{1000}{OT1}
+\setfont\reducedsc\scshape{10}{1000}{OT1}
+\setfont\reducedttsl\ttslshape{10}{1000}{OT1TT}
 \font\reducedi=cmmi10
 \font\reducedsy=cmsy10
+\def\reducedecsize{1000}
+
+% reset the current fonts
+\textfonts
+\rm
+} % end of 11pt text font size definitions
+
+
+% Definitions to make the main text be 10pt Computer Modern, with
+% section, chapter, etc., sizes following suit.  This is for the GNU
+% Press printing of the Emacs 22 manual.  Maybe other manuals in the
+% future.  Used with @smallbook, which sets the leading to 12pt.
+%
+\def\definetextfontsizex{%
+% Text fonts (10pt).
+\def\textnominalsize{10pt}
+\edef\mainmagstep{1000}
+\setfont\textrm\rmshape{10}{\mainmagstep}{OT1}
+\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT}
+\setfont\textbf\bfshape{10}{\mainmagstep}{OT1}
+\setfont\textit\itshape{10}{\mainmagstep}{OT1IT}
+\setfont\textsl\slshape{10}{\mainmagstep}{OT1}
+\setfont\textsf\sfshape{10}{\mainmagstep}{OT1}
+\setfont\textsc\scshape{10}{\mainmagstep}{OT1}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT}
+\font\texti=cmmi10 scaled \mainmagstep
+\font\textsy=cmsy10 scaled \mainmagstep
+\def\textecsize{1000}
+
+% A few fonts for @defun names and args.
+\setfont\defbf\bfshape{10}{\magstephalf}{OT1}
+\setfont\deftt\ttshape{10}{\magstephalf}{OT1TT}
+\setfont\defttsl\ttslshape{10}{\magstephalf}{OT1TT}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
+
+% Fonts for indices, footnotes, small examples (9pt).
+\def\smallnominalsize{9pt}
+\setfont\smallrm\rmshape{9}{1000}{OT1}
+\setfont\smalltt\ttshape{9}{1000}{OT1TT}
+\setfont\smallbf\bfshape{10}{900}{OT1}
+\setfont\smallit\itshape{9}{1000}{OT1IT}
+\setfont\smallsl\slshape{9}{1000}{OT1}
+\setfont\smallsf\sfshape{9}{1000}{OT1}
+\setfont\smallsc\scshape{10}{900}{OT1}
+\setfont\smallttsl\ttslshape{10}{900}{OT1TT}
+\font\smalli=cmmi9
+\font\smallsy=cmsy9
+\def\smallecsize{0900}
+
+% Fonts for small examples (8pt).
+\def\smallernominalsize{8pt}
+\setfont\smallerrm\rmshape{8}{1000}{OT1}
+\setfont\smallertt\ttshape{8}{1000}{OT1TT}
+\setfont\smallerbf\bfshape{10}{800}{OT1}
+\setfont\smallerit\itshape{8}{1000}{OT1IT}
+\setfont\smallersl\slshape{8}{1000}{OT1}
+\setfont\smallersf\sfshape{8}{1000}{OT1}
+\setfont\smallersc\scshape{10}{800}{OT1}
+\setfont\smallerttsl\ttslshape{10}{800}{OT1TT}
+\font\smalleri=cmmi8
+\font\smallersy=cmsy8
+\def\smallerecsize{0800}
+
+% Fonts for title page (20.4pt):
+\def\titlenominalsize{20pt}
+\setfont\titlerm\rmbshape{12}{\magstep3}{OT1}
+\setfont\titleit\itbshape{10}{\magstep4}{OT1IT}
+\setfont\titlesl\slbshape{10}{\magstep4}{OT1}
+\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT}
+\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT}
+\setfont\titlesf\sfbshape{17}{\magstep1}{OT1}
+\let\titlebf=\titlerm
+\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
+\font\titlei=cmmi12 scaled \magstep3
+\font\titlesy=cmsy10 scaled \magstep4
+\def\titleecsize{2074}
+
+% Chapter fonts (14.4pt).
+\def\chapnominalsize{14pt}
+\setfont\chaprm\rmbshape{12}{\magstep1}{OT1}
+\setfont\chapit\itbshape{10}{\magstep2}{OT1IT}
+\setfont\chapsl\slbshape{10}{\magstep2}{OT1}
+\setfont\chaptt\ttbshape{12}{\magstep1}{OT1TT}
+\setfont\chapttsl\ttslshape{10}{\magstep2}{OT1TT}
+\setfont\chapsf\sfbshape{12}{\magstep1}{OT1}
+\let\chapbf\chaprm
+\setfont\chapsc\scbshape{10}{\magstep2}{OT1}
+\font\chapi=cmmi12 scaled \magstep1
+\font\chapsy=cmsy10 scaled \magstep2
+\def\chapecsize{1440}
+
+% Section fonts (12pt).
+\def\secnominalsize{12pt}
+\setfont\secrm\rmbshape{12}{1000}{OT1}
+\setfont\secit\itbshape{10}{\magstep1}{OT1IT}
+\setfont\secsl\slbshape{10}{\magstep1}{OT1}
+\setfont\sectt\ttbshape{12}{1000}{OT1TT}
+\setfont\secttsl\ttslshape{10}{\magstep1}{OT1TT}
+\setfont\secsf\sfbshape{12}{1000}{OT1}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep1}{OT1}
+\font\seci=cmmi12
+\font\secsy=cmsy10 scaled \magstep1
+\def\sececsize{1200}
+
+% Subsection fonts (10pt).
+\def\ssecnominalsize{10pt}
+\setfont\ssecrm\rmbshape{10}{1000}{OT1}
+\setfont\ssecit\itbshape{10}{1000}{OT1IT}
+\setfont\ssecsl\slbshape{10}{1000}{OT1}
+\setfont\ssectt\ttbshape{10}{1000}{OT1TT}
+\setfont\ssecttsl\ttslshape{10}{1000}{OT1TT}
+\setfont\ssecsf\sfbshape{10}{1000}{OT1}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{1000}{OT1}
+\font\sseci=cmmi10
+\font\ssecsy=cmsy10
+\def\ssececsize{1000}
+
+% Reduced fonts for @acro in text (9pt).
+\def\reducednominalsize{9pt}
+\setfont\reducedrm\rmshape{9}{1000}{OT1}
+\setfont\reducedtt\ttshape{9}{1000}{OT1TT}
+\setfont\reducedbf\bfshape{10}{900}{OT1}
+\setfont\reducedit\itshape{9}{1000}{OT1IT}
+\setfont\reducedsl\slshape{9}{1000}{OT1}
+\setfont\reducedsf\sfshape{9}{1000}{OT1}
+\setfont\reducedsc\scshape{10}{900}{OT1}
+\setfont\reducedttsl\ttslshape{10}{900}{OT1TT}
+\font\reducedi=cmmi9
+\font\reducedsy=cmsy9
+\def\reducedecsize{0900}
+
+% reduce space between paragraphs
+\divide\parskip by 2
+
+% reset the current fonts
+\textfonts
+\rm
+} % end of 10pt text font size definitions
+
+
+% We provide the user-level command
+%   @fonttextsize 10
+% (or 11) to redefine the text font size.  pt is assumed.
+%
+\def\xword{10}
+\def\xiword{11}
+%
+\parseargdef\fonttextsize{%
+  \def\textsizearg{#1}%
+  \wlog{doing @fonttextsize \textsizearg}%
+  %
+  % Set \globaldefs so that documents can use this inside @tex, since
+  % makeinfo 4.8 does not support it, but we need it nonetheless.
+  %
+ \begingroup \globaldefs=1
+  \ifx\textsizearg\xword \definetextfontsizex
+  \else \ifx\textsizearg\xiword \definetextfontsizexi
+  \else
+    \errhelp=\EMsimple
+    \errmessage{@fonttextsize only supports `10' or `11', not `\textsizearg'}
+  \fi\fi
+ \endgroup
+}
+
 
 % In order for the font changes to affect most math symbols and letters,
 % we have to define the \textfont of the standard families.  Since
@@ -1583,18 +2283,19 @@ where each line of input produces a line of output.}
 % of just \STYLE.  We do this because \STYLE needs to also set the
 % current \fam for math mode.  Our \STYLE (e.g., \rm) commands hardwire
 % \tenSTYLE to set the current font.
-% 
+%
 % Each font-changing command also sets the names \lsize (one size lower)
 % and \lllsize (three sizes lower).  These relative commands are used in
 % the LaTeX logo and acronyms.
-% 
+%
 % This all needs generalizing, badly.
-% 
+%
 \def\textfonts{%
   \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
   \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
   \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy
   \let\tenttsl=\textttsl
+  \def\curfontsize{text}%
   \def\lsize{reduced}\def\lllsize{smaller}%
   \resetmathfonts \setleading{\textleading}}
 \def\titlefonts{%
@@ -1602,13 +2303,16 @@ where each line of input produces a line of output.}
   \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
   \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
   \let\tenttsl=\titlettsl
+  \def\curfontsize{title}%
   \def\lsize{chap}\def\lllsize{subsec}%
   \resetmathfonts \setleading{25pt}}
-\def\titlefont#1{{\titlefonts\rm #1}}
+\def\titlefont#1{{\titlefonts\rmisbold #1}}
 \def\chapfonts{%
   \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
   \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
-  \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl
+  \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy
+  \let\tenttsl=\chapttsl
+  \def\curfontsize{chap}%
   \def\lsize{sec}\def\lllsize{text}%
   \resetmathfonts \setleading{19pt}}
 \def\secfonts{%
@@ -1616,6 +2320,7 @@ where each line of input produces a line of output.}
   \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
   \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy
   \let\tenttsl=\secttsl
+  \def\curfontsize{sec}%
   \def\lsize{subsec}\def\lllsize{reduced}%
   \resetmathfonts \setleading{16pt}}
 \def\subsecfonts{%
@@ -1623,6 +2328,7 @@ where each line of input produces a line of output.}
   \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
   \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy
   \let\tenttsl=\ssecttsl
+  \def\curfontsize{ssec}%
   \def\lsize{text}\def\lllsize{small}%
   \resetmathfonts \setleading{15pt}}
 \let\subsubsecfonts = \subsecfonts
@@ -1631,6 +2337,7 @@ where each line of input produces a line of output.}
   \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc
   \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy
   \let\tenttsl=\reducedttsl
+  \def\curfontsize{reduced}%
   \def\lsize{small}\def\lllsize{smaller}%
   \resetmathfonts \setleading{10.5pt}}
 \def\smallfonts{%
@@ -1638,6 +2345,7 @@ where each line of input produces a line of output.}
   \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
   \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
   \let\tenttsl=\smallttsl
+  \def\curfontsize{small}%
   \def\lsize{smaller}\def\lllsize{smaller}%
   \resetmathfonts \setleading{10.5pt}}
 \def\smallerfonts{%
@@ -1645,9 +2353,20 @@ where each line of input produces a line of output.}
   \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
   \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
   \let\tenttsl=\smallerttsl
+  \def\curfontsize{smaller}%
   \def\lsize{smaller}\def\lllsize{smaller}%
   \resetmathfonts \setleading{9.5pt}}
 
+% Fonts for short table of contents.
+\setfont\shortcontrm\rmshape{12}{1000}{OT1}
+\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1}  % no cmb12
+\setfont\shortcontsl\slshape{12}{1000}{OT1}
+\setfont\shortconttt\ttshape{12}{1000}{OT1TT}
+
+% Define these just so they can be easily changed for other fonts.
+\def\angleleft{$\langle$}
+\def\angleright{$\rangle$}
+
 % Set the fonts to use with the @small... environments.
 \let\smallexamplefonts = \smallfonts
 
@@ -1661,28 +2380,128 @@ where each line of input produces a line of output.}
 %
 % By the way, for comparison, here's what fits with @example (10pt):
 %   8.5x11=71  smallbook=60  a4=75  a5=58
-%
-% I wish the USA used A4 paper.
 % --karl, 24jan03.
 
-
 % Set up the default fonts, so we can use them for creating boxes.
 %
-\textfonts \rm
+\definetextfontsizexi
 
-% Define these so they can be easily changed for other fonts.
-\def\angleleft{$\langle$}
-\def\angleright{$\rangle$}
+
+\message{markup,}
+
+% Check if we are currently using a typewriter font.  Since all the
+% Computer Modern typewriter fonts have zero interword stretch (and
+% shrink), and it is reasonable to expect all typewriter fonts to have
+% this property, we can check that font parameter.
+%
+\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
+
+% Markup style infrastructure.  \defmarkupstylesetup\INITMACRO will
+% define and register \INITMACRO to be called on markup style changes.
+% \INITMACRO can check \currentmarkupstyle for the innermost
+% style and the set of \ifmarkupSTYLE switches for all styles
+% currently in effect.
+\newif\ifmarkupvar
+\newif\ifmarkupsamp
+\newif\ifmarkupkey
+%\newif\ifmarkupfile % @file == @samp.
+%\newif\ifmarkupoption % @option == @samp.
+\newif\ifmarkupcode
+\newif\ifmarkupkbd
+%\newif\ifmarkupenv % @env == @code.
+%\newif\ifmarkupcommand % @command == @code.
+\newif\ifmarkuptex % @tex (and part of @math, for now).
+\newif\ifmarkupexample
+\newif\ifmarkupverb
+\newif\ifmarkupverbatim
+
+\let\currentmarkupstyle\empty
+
+\def\setupmarkupstyle#1{%
+  \csname markup#1true\endcsname
+  \def\currentmarkupstyle{#1}%
+  \markupstylesetup
+}
+
+\let\markupstylesetup\empty
+
+\def\defmarkupstylesetup#1{%
+  \expandafter\def\expandafter\markupstylesetup
+    \expandafter{\markupstylesetup #1}%
+  \def#1%
+}
+
+% Markup style setup for left and right quotes.
+\defmarkupstylesetup\markupsetuplq{%
+  \expandafter\let\expandafter \temp \csname markupsetuplq\currentmarkupstyle\endcsname
+  \ifx\temp\relax \markupsetuplqdefault \else \temp \fi
+}
+
+\defmarkupstylesetup\markupsetuprq{%
+  \expandafter\let\expandafter \temp \csname markupsetuprq\currentmarkupstyle\endcsname
+  \ifx\temp\relax \markupsetuprqdefault \else \temp \fi
+}
+
+{
+\catcode`\'=\active
+\catcode`\`=\active
+
+\gdef\markupsetuplqdefault{\let`\lq}
+\gdef\markupsetuprqdefault{\let'\rq}
+
+\gdef\markupsetcodequoteleft{\let`\codequoteleft}
+\gdef\markupsetcodequoteright{\let'\codequoteright}
+
+\gdef\markupsetnoligaturesquoteleft{\let`\noligaturesquoteleft}
+}
+
+\let\markupsetuplqcode \markupsetcodequoteleft
+\let\markupsetuprqcode \markupsetcodequoteright
+\let\markupsetuplqexample \markupsetcodequoteleft
+\let\markupsetuprqexample \markupsetcodequoteright
+\let\markupsetuplqverb \markupsetcodequoteleft
+\let\markupsetuprqverb \markupsetcodequoteright
+\let\markupsetuplqverbatim \markupsetcodequoteleft
+\let\markupsetuprqverbatim \markupsetcodequoteright
+
+\let\markupsetuplqsamp \markupsetnoligaturesquoteleft
+\let\markupsetuplqkbd \markupsetnoligaturesquoteleft
+
+% Allow an option to not replace quotes with a regular directed right
+% quote/apostrophe (char 0x27), but instead use the undirected quote
+% from cmtt (char 0x0d).  The undirected quote is ugly, so don't make it
+% the default, but it works for pasting with more pdf viewers (at least
+% evince), the lilypond developers report.  xpdf does work with the
+% regular 0x27.
+%
+\def\codequoteright{%
+  \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax
+    \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax
+      '%
+    \else \char'15 \fi
+  \else \char'15 \fi
+}
+%
+% and a similar option for the left quote char vs. a grave accent.
+% Modern fonts display ASCII 0x60 as a grave accent, so some people like
+% the code environments to do likewise.
+%
+\def\codequoteleft{%
+  \expandafter\ifx\csname SETtxicodequotebacktick\endcsname\relax
+    \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax
+      % [Knuth] pp. 380,381,391
+      % \relax disables Spanish ligatures ?` and !` of \tt font.
+      \relax`%
+    \else \char'22 \fi
+  \else \char'22 \fi
+}
+
+% [Knuth] pp. 380,381,391, disable Spanish ligatures ?` and !` of \tt font.
+\def\noligaturesquoteleft{\relax\lq}
 
 % Count depth in font-changes, for error checks
 \newcount\fontdepth \fontdepth=0
 
-% Fonts for short table of contents.
-\setfont\shortcontrm\rmshape{12}{1000}
-\setfont\shortcontbf\bfshape{10}{\magstep1}  % no cmb12
-\setfont\shortcontsl\slshape{12}{1000}
-\setfont\shortconttt\ttshape{12}{1000}
-
 %% Add scribe-like font environments, plus @l for inline lisp (usually sans
 %% serif) and @ii for TeX italic
 
@@ -1697,18 +2516,28 @@ where each line of input produces a line of output.}
 % @var is set to this for defun arguments.
 \def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx}
 
-% like \smartslanted except unconditionally use \sl.  We never want
+% @cite is like \smartslanted except unconditionally use \sl.  We never want
 % ttsl for book titles, do we?
 \def\cite#1{{\sl #1}\futurelet\next\smartitalicx}
 
 \let\i=\smartitalic
-\let\var=\smartslanted
+\let\slanted=\smartslanted
+\def\var#1{{\setupmarkupstyle{var}\smartslanted{#1}}}
 \let\dfn=\smartslanted
 \let\emph=\smartitalic
 
+% Explicit font changes: @r, @sc, undocumented @ii.
+\def\r#1{{\rm #1}}              % roman font
+\def\sc#1{{\smallcaps#1}}       % smallcaps font
+\def\ii#1{{\it #1}}             % italic font
+
+% @b, explicit bold.  Also @strong.
 \def\b#1{{\bf #1}}
 \let\strong=\b
 
+% @sansserif, explicit sans.
+\def\sansserif#1{{\sf #1}}
+
 % We can't just use \exhyphenpenalty, because that only has effect at
 % the end of a paragraph.  Restore normal hyphenation at the end of the
 % group within which \nohyphenation is presumably called.
@@ -1721,27 +2550,48 @@ where each line of input produces a line of output.}
 % sometimes \x has an active definition that messes things up.
 %
 \catcode`@=11
-  \def\frenchspacing{%
+  \def\plainfrenchspacing{%
     \sfcode\dotChar  =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m
     \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m
+    \def\endofsentencespacefactor{1000}% for @. and friends
+  }
+  \def\plainnonfrenchspacing{%
+    \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000
+    \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250
+    \def\endofsentencespacefactor{3000}% for @. and friends
   }
 \catcode`@=\other
+\def\endofsentencespacefactor{3000}% default
 
+% @t, explicit typewriter.
 \def\t#1{%
-  {\tt \rawbackslash \frenchspacing #1}%
+  {\tt \rawbackslash \plainfrenchspacing #1}%
   \null
 }
-\def\samp#1{`\tclose{#1}'\null}
-\setfont\keyrm\rmshape{8}{1000}
-\font\keysy=cmsy9
-\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
-  \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
-    \vbox{\hrule\kern-0.4pt
-     \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
-    \kern-0.4pt\hrule}%
-  \kern-.06em\raise0.4pt\hbox{\angleright}}}}
-% The old definition, with no lozenge:
-%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
+
+% @samp.
+\def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}}
+
+% definition of @key that produces a lozenge.  Doesn't adjust to text size.
+%\setfont\keyrm\rmshape{8}{1000}{OT1}
+%\font\keysy=cmsy9
+%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
+%  \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
+%    \vbox{\hrule\kern-0.4pt
+%     \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
+%    \kern-0.4pt\hrule}%
+%  \kern-.06em\raise0.4pt\hbox{\angleright}}}}
+
+% definition of @key with no lozenge.  If the current font is already
+% monospace, don't change it; that way, we respect @kbdinputstyle.  But
+% if it isn't monospace, then use \tt.
+%
+\def\key#1{{\setupmarkupstyle{key}%
+  \nohyphenation
+  \ifmonospace\else\tt\fi
+  #1}\null}
+
+% ctrl is no longer a Texinfo command.
 \def\ctrl #1{{\tt \rawbackslash \hat}#1}
 
 % @file, @option are the same as @samp.
@@ -1765,7 +2615,7 @@ where each line of input produces a line of output.}
     \nohyphenation
     %
     \rawbackslash
-    \frenchspacing
+    \plainfrenchspacing
     #1%
   }%
   \null
@@ -1781,12 +2631,21 @@ where each line of input produces a line of output.}
 % and arrange explicitly to hyphenate at a dash.
 %  -- rms.
 {
-  \catcode`\-=\active
-  \catcode`\_=\active
+  \catcode`\-=\active \catcode`\_=\active
+  \catcode`\'=\active \catcode`\`=\active
+  \global\let'=\rq \global\let`=\lq  % default definitions
   %
   \global\def\code{\begingroup
-    \catcode`\-=\active \let-\codedash
-    \catcode`\_=\active \let_\codeunder
+    \setupmarkupstyle{code}%
+    % The following should really be moved into \setupmarkupstyle handlers.
+    \catcode\dashChar=\active  \catcode\underChar=\active
+    \ifallowcodebreaks
+     \let-\codedash
+     \let_\codeunder
+    \else
+     \let-\realdash
+     \let_\realunder
+    \fi
     \codex
   }
 }
@@ -1806,43 +2665,73 @@ where each line of input produces a line of output.}
 }
 \def\codex #1{\tclose{#1}\endgroup}
 
+% An additional complication: the above will allow breaks after, e.g.,
+% each of the four underscores in __typeof__.  This is undesirable in
+% some manuals, especially if they don't have long identifiers in
+% general.  @allowcodebreaks provides a way to control this.
+%
+\newif\ifallowcodebreaks  \allowcodebreakstrue
+
+\def\keywordtrue{true}
+\def\keywordfalse{false}
+
+\parseargdef\allowcodebreaks{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\keywordtrue
+    \allowcodebreakstrue
+  \else\ifx\txiarg\keywordfalse
+    \allowcodebreaksfalse
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @allowcodebreaks option `\txiarg'}%
+  \fi\fi
+}
+
 % @kbd is like @code, except that if the argument is just one @key command,
 % then @kbd has no effect.
+\def\kbd#1{{\setupmarkupstyle{kbd}\def\look{#1}\expandafter\kbdfoo\look??\par}}
 
 % @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
 %   `example' (@kbd uses ttsl only inside of @example and friends),
 %   or `code' (@kbd uses normal tty font always).
 \parseargdef\kbdinputstyle{%
-  \def\arg{#1}%
-  \ifx\arg\worddistinct
+  \def\txiarg{#1}%
+  \ifx\txiarg\worddistinct
     \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
-  \else\ifx\arg\wordexample
+  \else\ifx\txiarg\wordexample
     \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
-  \else\ifx\arg\wordcode
+  \else\ifx\txiarg\wordcode
     \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
   \else
     \errhelp = \EMsimple
-    \errmessage{Unknown @kbdinputstyle option `\arg'}%
+    \errmessage{Unknown @kbdinputstyle option `\txiarg'}%
   \fi\fi\fi
 }
 \def\worddistinct{distinct}
 \def\wordexample{example}
 \def\wordcode{code}
 
-% Default is `distinct.'
+% Default is `distinct'.
 \kbdinputstyle distinct
 
 \def\xkey{\key}
 \def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
 \ifx\one\xkey\ifx\threex\three \key{#2}%
-\else{\tclose{\kbdfont\look}}\fi
-\else{\tclose{\kbdfont\look}}\fi}
+\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi}
 
-% For @url, @env, @command quotes seem unnecessary, so use \code.
-\let\url=\code
+% For @indicateurl, @env, @command quotes seem unnecessary, so use \code.
+\let\indicateurl=\code
 \let\env=\code
 \let\command=\code
 
+% @clicksequence{File @click{} Open ...}
+\def\clicksequence#1{\begingroup #1\endgroup}
+
+% @clickstyle @arrow   (by default)
+\parseargdef\clickstyle{\def\click{#1}}
+\def\click{\arrow}
+
 % @uref (abbreviation for `urlref') takes an optional (comma-separated)
 % second argument specifying the text to display and an optional third
 % arg as text to display instead of (rather than in addition to) the url
@@ -1871,6 +2760,10 @@ where each line of input produces a line of output.}
   \endlink
 \endgroup}
 
+% @url synonym for @uref, since that's how everyone uses it.
+%
+\let\url=\uref
+
 % rms does not like angle brackets --karl, 17may97.
 % So now @email is just like @uref, unless we are pdf.
 %
@@ -1888,30 +2781,20 @@ where each line of input produces a line of output.}
   \let\email=\uref
 \fi
 
-% Check if we are currently using a typewriter font.  Since all the
-% Computer Modern typewriter fonts have zero interword stretch (and
-% shrink), and it is reasonable to expect all typewriter fonts to have
-% this property, we can check that font parameter.
-%
-\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
-
 % Typeset a dimension, e.g., `in' or `pt'.  The only reason for the
 % argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
 %
 \def\dmn#1{\thinspace #1}
 
-\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
-
 % @l was never documented to mean ``switch to the Lisp font'',
 % and it is not used as such in any manual I can find.  We need it for
 % Polish suppressed-l.  --karl, 22sep96.
 %\def\l#1{{\li #1}\null}
 
-% Explicit font changes: @r, @sc, undocumented @ii.
-\def\r#1{{\rm #1}}              % roman font
-\def\sc#1{{\smallcaps#1}}       % smallcaps font
-\def\ii#1{{\it #1}}             % italic font
-
+% @acronym for "FBI", "NATO", and the like.
+% We print this one point size smaller, since it's intended for
+% all-uppercase.
+%
 \def\acronym#1{\doacronym #1,,\finish}
 \def\doacronym#1,#2,#3\finish{%
   {\selectfonts\lsize #1}%
@@ -1921,10 +2804,172 @@ where each line of input produces a line of output.}
   \fi
 }
 
-% @pounds{} is a sterling sign, which is in the CM italic font.
-% 
+% @abbr for "Comput. J." and the like.
+% No font change, but don't do end-of-sentence spacing.
+%
+\def\abbr#1{\doabbr #1,,\finish}
+\def\doabbr#1,#2,#3\finish{%
+  {\plainfrenchspacing #1}%
+  \def\temp{#2}%
+  \ifx\temp\empty \else
+    \space ({\unsepspaces \ignorespaces \temp \unskip})%
+  \fi
+}
+
+
+\message{glyphs,}
+
+% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
+%
+% Since these characters are used in examples, they should be an even number of
+% \tt widths. Each \tt character is 1en, so two makes it 1em.
+%
+\def\point{$\star$}
+\def\arrow{\leavevmode\raise.05ex\hbox to 1em{\hfil$\rightarrow$\hfil}}
+\def\result{\leavevmode\raise.05ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
+\def\expansion{\leavevmode\hbox to 1em{\hfil$\mapsto$\hfil}}
+\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
+\def\equiv{\leavevmode\hbox to 1em{\hfil$\ptexequiv$\hfil}}
+
+% The @error{} command.
+% Adapted from the TeXbook's \boxit.
+%
+\newbox\errorbox
+%
+{\tentt \global\dimen0 = 3em}% Width of the box.
+\dimen2 = .55pt % Thickness of rules
+% The text. (`r' is open on the right, `e' somewhat less so on the left.)
+\setbox0 = \hbox{\kern-.75pt \reducedsf error\kern-1.5pt}
+%
+\setbox\errorbox=\hbox to \dimen0{\hfil
+   \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
+   \advance\hsize by -2\dimen2 % Rules.
+   \vbox{%
+      \hrule height\dimen2
+      \hbox{\vrule width\dimen2 \kern3pt          % Space to left of text.
+         \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
+         \kern3pt\vrule width\dimen2}% Space to right.
+      \hrule height\dimen2}
+    \hfil}
+%
+\def\error{\leavevmode\lower.7ex\copy\errorbox}
+
+% @pounds{} is a sterling sign, which Knuth put in the CM italic font.
+%
 \def\pounds{{\it\$}}
 
+% @euro{} comes from a separate font, depending on the current style.
+% We use the free feym* fonts from the eurosym package by Henrik
+% Theiling, which support regular, slanted, bold and bold slanted (and
+% "outlined" (blackboard board, sort of) versions, which we don't need).
+% It is available from http://www.ctan.org/tex-archive/fonts/eurosym.
+%
+% Although only regular is the truly official Euro symbol, we ignore
+% that.  The Euro is designed to be slightly taller than the regular
+% font height.
+%
+% feymr - regular
+% feymo - slanted
+% feybr - bold
+% feybo - bold slanted
+%
+% There is no good (free) typewriter version, to my knowledge.
+% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide.
+% Hmm.
+%
+% Also doesn't work in math.  Do we need to do math with euro symbols?
+% Hope not.
+%
+%
+\def\euro{{\eurofont e}}
+\def\eurofont{%
+  % We set the font at each command, rather than predefining it in
+  % \textfonts and the other font-switching commands, so that
+  % installations which never need the symbol don't have to have the
+  % font installed.
+  %
+  % There is only one designed size (nominal 10pt), so we always scale
+  % that to the current nominal size.
+  %
+  % By the way, simply using "at 1em" works for cmr10 and the like, but
+  % does not work for cmbx10 and other extended/shrunken fonts.
+  %
+  \def\eurosize{\csname\curfontsize nominalsize\endcsname}%
+  %
+  \ifx\curfontstyle\bfstylename
+    % bold:
+    \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize
+  \else
+    % regular:
+    \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize
+  \fi
+  \thiseurofont
+}
+
+% Glyphs from the EC fonts.  We don't use \let for the aliases, because
+% sometimes we redefine the original macro, and the alias should reflect
+% the redefinition.
+%
+% Use LaTeX names for the Icelandic letters.
+\def\DH{{\ecfont \char"D0}} % Eth
+\def\dh{{\ecfont \char"F0}} % eth
+\def\TH{{\ecfont \char"DE}} % Thorn
+\def\th{{\ecfont \char"FE}} % thorn
+%
+\def\guillemetleft{{\ecfont \char"13}}
+\def\guillemotleft{\guillemetleft}
+\def\guillemetright{{\ecfont \char"14}}
+\def\guillemotright{\guillemetright}
+\def\guilsinglleft{{\ecfont \char"0E}}
+\def\guilsinglright{{\ecfont \char"0F}}
+\def\quotedblbase{{\ecfont \char"12}}
+\def\quotesinglbase{{\ecfont \char"0D}}
+%
+% This positioning is not perfect (see the ogonek LaTeX package), but
+% we have the precomposed glyphs for the most common cases.  We put the
+% tests to use those glyphs in the single \ogonek macro so we have fewer
+% dummy definitions to worry about for index entries, etc.
+%
+% ogonek is also used with other letters in Lithuanian (IOU), but using
+% the precomposed glyphs for those is not so easy since they aren't in
+% the same EC font.
+\def\ogonek#1{{%
+  \def\temp{#1}%
+  \ifx\temp\macrocharA\Aogonek
+  \else\ifx\temp\macrochara\aogonek
+  \else\ifx\temp\macrocharE\Eogonek
+  \else\ifx\temp\macrochare\eogonek
+  \else
+    \ecfont \setbox0=\hbox{#1}%
+    \ifdim\ht0=1ex\accent"0C #1%
+    \else\ooalign{\unhbox0\crcr\hidewidth\char"0C \hidewidth}%
+    \fi
+  \fi\fi\fi\fi
+  }%
+}
+\def\Aogonek{{\ecfont \char"81}}\def\macrocharA{A}
+\def\aogonek{{\ecfont \char"A1}}\def\macrochara{a}
+\def\Eogonek{{\ecfont \char"86}}\def\macrocharE{E}
+\def\eogonek{{\ecfont \char"A6}}\def\macrochare{e}
+%
+% Use the ec* fonts (cm-super in outline format) for non-CM glyphs.
+\def\ecfont{%
+  % We can't distinguish serif/sans and italic/slanted, but this
+  % is used for crude hacks anyway (like adding French and German
+  % quotes to documents typeset with CM, where we lose kerning), so
+  % hopefully nobody will notice/care.
+  \edef\ecsize{\csname\curfontsize ecsize\endcsname}%
+  \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}%
+  \ifx\curfontstyle\bfstylename
+    % bold:
+    \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize
+  \else
+    % regular:
+    \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize
+  \fi
+  \thisecfont
+}
+
 % @registeredsymbol - R in a circle.  The font for the R should really
 % be smaller yet, but lllsize is the best we can do for now.
 % Adapted from the plain.tex definition of \copyright.
@@ -1935,6 +2980,24 @@ where each line of input produces a line of output.}
     }$%
 }
 
+% @textdegree - the normal degrees sign.
+%
+\def\textdegree{$^\circ$}
+
+% Laurent Siebenmann reports \Orb undefined with:
+%  Textures 1.7.7 (preloaded format=plain 93.10.14)  (68K)  16 APR 2004 02:38
+% so we'll define it if necessary.
+%
+\ifx\Orb\undefined
+\def\Orb{\mathhexbox20D}
+\fi
+
+% Quotes.
+\chardef\quotedblleft="5C
+\chardef\quotedblright=`\"
+\chardef\quoteleft=`\`
+\chardef\quoteright=`\'
+
 
 \message{page headings,}
 
@@ -2019,12 +3082,9 @@ where each line of input produces a line of output.}
 \let\subtitlerm=\tenrm
 \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
 
-\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines
-		\let\tt=\authortt}
-
 \parseargdef\title{%
   \checkenv\titlepage
-  \leftline{\titlefonts\rm #1}
+  \leftline{\titlefonts\rmisbold #1}
   % print a rule at the page bottom also.
   \finishedtitlepagefalse
   \vskip4pt \hrule height 4pt width \hsize \vskip4pt
@@ -2037,7 +3097,7 @@ where each line of input produces a line of output.}
 
 % @author should come last, but may come many times.
 % It can also be used inside @quotation.
-% 
+%
 \parseargdef\author{%
   \def\temp{\quotation}%
   \ifx\thisenv\temp
@@ -2045,7 +3105,7 @@ where each line of input produces a line of output.}
   \else
     \checkenv\titlepage
     \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi
-    {\authorfont \leftline{#1}}%
+    {\secfonts\rmisbold \leftline{#1}}%
   \fi
 }
 
@@ -2098,12 +3158,39 @@ where each line of input produces a line of output.}
   %
   % Leave some space for the footline.  Hopefully ok to assume
   % @evenfooting will not be used by itself.
-  \global\advance\pageheight by -\baselineskip
-  \global\advance\vsize by -\baselineskip
+  \global\advance\pageheight by -12pt
+  \global\advance\vsize by -12pt
 }
 
 \parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
 
+% @evenheadingmarks top     \thischapter <- chapter at the top of a page
+% @evenheadingmarks bottom  \thischapter <- chapter at the bottom of a page
+%
+% The same set of arguments for:
+%
+% @oddheadingmarks
+% @evenfootingmarks
+% @oddfootingmarks
+% @everyheadingmarks
+% @everyfootingmarks
+
+\def\evenheadingmarks{\headingmarks{even}{heading}}
+\def\oddheadingmarks{\headingmarks{odd}{heading}}
+\def\evenfootingmarks{\headingmarks{even}{footing}}
+\def\oddfootingmarks{\headingmarks{odd}{footing}}
+\def\everyheadingmarks#1 {\headingmarks{even}{heading}{#1}
+                          \headingmarks{odd}{heading}{#1} }
+\def\everyfootingmarks#1 {\headingmarks{even}{footing}{#1}
+                          \headingmarks{odd}{footing}{#1} }
+% #1 = even/odd, #2 = heading/footing, #3 = top/bottom.
+\def\headingmarks#1#2#3 {%
+  \expandafter\let\expandafter\temp \csname get#3headingmarks\endcsname
+  \global\expandafter\let\csname get#1#2marks\endcsname \temp
+}
+
+\everyheadingmarks bottom
+\everyfootingmarks bottom
 
 % @headings double      turns headings on for double-sided printing.
 % @headings single      turns headings on for single-sided printing.
@@ -2240,17 +3327,13 @@ where each line of input produces a line of output.}
     % \parskip glue -- logically it's part of the @item we just started.
     \nobreak \vskip-\parskip
     %
-    % Stop a page break at the \parskip glue coming up.  (Unfortunately
-    % we can't prevent a possible page break at the following
-    % \baselineskip glue.)  However, if what follows is an environment
-    % such as @example, there will be no \parskip glue; then
-    % the negative vskip we just would cause the example and the item to
-    % crash together.  So we use this bizarre value of 10001 as a signal
-    % to \aboveenvbreak to insert \parskip glue after all.
-    % (Possibly there are other commands that could be followed by
-    % @example which need the same treatment, but not section titles; or
-    % maybe section titles are the only special case and they should be
-    % penalty 10001...)
+    % Stop a page break at the \parskip glue coming up.  However, if
+    % what follows is an environment such as @example, there will be no
+    % \parskip glue; then the negative vskip we just inserted would
+    % cause the example and the item to crash together.  So we use this
+    % bizarre value of 10001 as a signal to \aboveenvbreak to insert
+    % \parskip glue after all.  Section titles are handled this way also.
+    %
     \penalty 10001
     \endgroup
     \itemxneedsnegativevskipfalse
@@ -2276,15 +3359,26 @@ where each line of input produces a line of output.}
 % @table, @ftable, @vtable.
 \envdef\table{%
   \let\itemindex\gobble
-  \tablex
+  \tablecheck{table}%
 }
 \envdef\ftable{%
   \def\itemindex ##1{\doind {fn}{\code{##1}}}%
-  \tablex
+  \tablecheck{ftable}%
 }
 \envdef\vtable{%
   \def\itemindex ##1{\doind {vr}{\code{##1}}}%
-  \tablex
+  \tablecheck{vtable}%
+}
+\def\tablecheck#1{%
+  \ifnum \the\catcode`\^^M=\active
+    \endgroup
+    \errmessage{This command won't work in this context; perhaps the problem is
+      that we are \inenvironment\thisenv}%
+    \def\next{\doignore{#1}}%
+  \else
+    \let\next\tablex
+  \fi
+  \next
 }
 \def\tablex#1{%
   \def\itemindicate{#1}%
@@ -2333,9 +3427,18 @@ where each line of input produces a line of output.}
   \parindent=0pt
   \parskip=\smallskipamount
   \ifdim\parskip=0pt \parskip=2pt \fi
+  %
+  % Try typesetting the item mark that if the document erroneously says
+  % something like @itemize @samp (intending @table), there's an error
+  % right away at the @itemize.  It's not the best error message in the
+  % world, but it's better than leaving it to the @item.  This means if
+  % the user wants an empty mark, they have to say @w{} not just @w.
   \def\itemcontents{#1}%
+  \setbox0 = \hbox{\itemcontents}%
+  %
   % @itemize with no arg is equivalent to @itemize @bullet.
   \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
+  %
   \let\item=\itemizeitem
 }
 
@@ -2356,6 +3459,7 @@ where each line of input produces a line of output.}
    \ifnum\lastpenalty<10000 \parskip=0in \fi
    \noindent
    \hbox to 0pt{\hss \itemcontents \kern\itemmargin}%
+   %
    \vadjust{\penalty 1200}}% not good to break after first line of item.
   \flushcr
 }
@@ -2537,7 +3641,7 @@ where each line of input produces a line of output.}
 
 % #1 is the @columnfraction, usually a decimal number like .5, but might
 % be just 1.  We just use it, whatever it is.
-% 
+%
 \def\pickupwholefraction#1 {%
   \global\advance\colcount by 1
   \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}%
@@ -2577,12 +3681,19 @@ where each line of input produces a line of output.}
 %
 % @headitem starts a heading row, which we typeset in bold.
 % Assignments have to be global since we are inside the implicit group
-% of an alignment entry.  Note that \everycr resets \everytab.
-\def\headitem{\checkenv\multitable \crcr \global\everytab={\bf}\the\everytab}%
+% of an alignment entry.  \everycr resets \everytab so we don't have to
+% undo it ourselves.
+\def\headitemfont{\b}% for people to use in the template row; not changeable
+\def\headitem{%
+  \checkenv\multitable
+  \crcr
+  \global\everytab={\bf}% can't use \headitemfont since the parsing differs
+  \the\everytab % for the first item
+}%
 %
 % A \tab used to include \hskip1sp.  But then the space in a template
 % line is not enough.  That is bad.  So let's go back to just `&' until
-% we encounter the problem it was intended to solve again.
+% we again encounter the problem the 1sp was intended to solve.
 %					--karl, nathan@acm.org, 20apr99.
 \def\tab{\checkenv\multitable &\the\everytab}%
 
@@ -2595,7 +3706,10 @@ where each line of input produces a line of output.}
   \startsavinginserts
   %
   % @item within a multitable starts a normal row.
-  \let\item\crcr
+  % We use \def instead of \let so that if one of the multitable entries
+  % contains an @itemize, we don't choke on the \item (seen as \crcr aka
+  % \endtemplate) expanding \doitemize.
+  \def\item{\crcr}%
   %
   \tolerance=9500
   \hbadness=9500
@@ -2680,19 +3794,17 @@ where each line of input produces a line of output.}
   \global\setpercentfalse
 }
 
-\def\setmultitablespacing{% test to see if user has set \multitablelinespace.
-% If so, do nothing. If not, give it an appropriate dimension based on
-% current baselineskip.
+\def\setmultitablespacing{%
+  \def\multistrut{\strut}% just use the standard line spacing
+  %
+  % Compute \multitablelinespace (if not defined by user) for use in
+  % \multitableparskip calculation.  We used define \multistrut based on
+  % this, but (ironically) that caused the spacing to be off.
+  % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100.
 \ifdim\multitablelinespace=0pt
 \setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
 \global\advance\multitablelinespace by-\ht0
-%% strut to put in table in case some entry doesn't have descenders,
-%% to keep lines equally spaced
-\let\multistrut = \strut
-\else
-%% FIXME: what is \box0 supposed to be?
-\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
-width0pt\relax} \fi
+\fi
 %% Test to see if parskip is larger than space between lines of
 %% table. If not, do nothing.
 %%        If so, set to same dimension as multitablelinespace.
@@ -2750,6 +3862,7 @@ width0pt\relax} \fi
 
 \def\doignore#1{\begingroup
   % Scan in ``verbatim'' mode:
+  \obeylines
   \catcode`\@ = \other
   \catcode`\{ = \other
   \catcode`\} = \other
@@ -2761,25 +3874,25 @@ width0pt\relax} \fi
   \doignorecount = 0
   %
   % Swallow text until we reach the matching `@end #1'.
-  \dodoignore {#1}%
+  \dodoignore{#1}%
 }
 
 { \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source.
   \obeylines %
   %
   \gdef\dodoignore#1{%
-    % #1 contains the string `ifinfo'.
+    % #1 contains the command name as a string, e.g., `ifinfo'.
+    %
+    % Define a command to find the next `@end #1'.
+    \long\def\doignoretext##1^^M@end #1{%
+      \doignoretextyyy##1^^M@#1\_STOP_}%
     %
-    % Define a command to find the next `@end #1', which must be on a line
-    % by itself.
-    \long\def\doignoretext##1^^M@end #1{\doignoretextyyy##1^^M@#1\_STOP_}%
     % And this command to find another #1 command, at the beginning of a
     % line.  (Otherwise, we would consider a line `@c @ifset', for
     % example, to count as an @ifset for nesting.)
     \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}%
     %
     % And now expand that command.
-    \obeylines %
     \doignoretext ^^M%
   }%
 }
@@ -2797,7 +3910,7 @@ width0pt\relax} \fi
 }
 
 % We have to swallow the remaining "\_STOP_".
-% 
+%
 \def\doignoretextzzz#1{%
   \ifnum\doignorecount = 0	% We have just found the outermost @end.
     \let\next\enddoignore
@@ -2809,7 +3922,12 @@ width0pt\relax} \fi
 }
 
 % Finish off ignored text.
-\def\enddoignore{\endgroup\ignorespaces}
+{ \obeylines%
+  % Ignore anything after the last `@end #1'; this matters in verbatim
+  % environments, where otherwise the newline after an ignored conditional
+  % would result in a blank line in the output.
+  \gdef\enddoignore#1^^M{\endgroup\ignorespaces}%
+}
 
 
 % @set VAR sets the variable VAR to an empty value.
@@ -2922,9 +4040,8 @@ width0pt\relax} \fi
 % Index generation facilities
 
 % Define \newwrite to be identical to plain tex's \newwrite
-% except not \outer, so it can be used within \newindex.
-{\catcode`\@=11
-\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}}
+% except not \outer, so it can be used within macros and \if's.
+\edef\newwrite{\makecsname{ptexnewwrite}}
 
 % \newindex {foo} defines an index named foo.
 % It automatically defines \fooindex such that
@@ -2975,11 +4092,11 @@ width0pt\relax} \fi
 \def\dosynindex#1#2#3{%
   % Only do \closeout if we haven't already done it, else we'll end up
   % closing the target index.
-  \expandafter \ifx\csname donesynindex#2\endcsname \undefined
+  \expandafter \ifx\csname donesynindex#2\endcsname \relax
     % The \closeout helps reduce unnecessary open files; the limit on the
     % Acorn RISC OS is a mere 16 files.
     \expandafter\closeout\csname#2indfile\endcsname
-    \expandafter\let\csname\donesynindex#2\endcsname = 1
+    \expandafter\let\csname donesynindex#2\endcsname = 1
   \fi
   % redefine \fooindfile:
   \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
@@ -3010,41 +4127,50 @@ width0pt\relax} \fi
 % we have to laboriously prevent expansion for those that we don't.
 %
 \def\indexdummies{%
+  \escapechar = `\\     % use backslash in output files.
   \def\@{@}% change to @@ when we switch to @ as escape char in index files.
   \def\ {\realbackslash\space }%
+  %
   % Need these in case \tex is in effect and \{ is a \delimiter again.
   % But can't use \lbracecmd and \rbracecmd because texindex assumes
   % braces and backslashes are used only as delimiters.
   \let\{ = \mylbrace
   \let\} = \myrbrace
   %
-  % \definedummyword defines \#1 as \realbackslash #1\space, thus
-  % effectively preventing its expansion.  This is used only for control
-  % words, not control letters, because the \space would be incorrect
-  % for control characters, but is needed to separate the control word
-  % from whatever follows.
+  % I don't entirely understand this, but when an index entry is
+  % generated from a macro call, the \endinput which \scanmacro inserts
+  % causes processing to be prematurely terminated.  This is,
+  % apparently, because \indexsorttmp is fully expanded, and \endinput
+  % is an expandable command.  The redefinition below makes \endinput
+  % disappear altogether for that purpose -- although logging shows that
+  % processing continues to some further point.  On the other hand, it
+  % seems \endinput does not hurt in the printed index arg, since that
+  % is still getting written without apparent harm.
   %
-  % For control letters, we have \definedummyletter, which omits the
-  % space.
+  % Sample source (mac-idx3.tex, reported by Graham Percival to
+  % help-texinfo, 22may06):
+  % @macro funindex {WORD}
+  % @findex xyz
+  % @end macro
+  % ...
+  % @funindex commtest
   %
-  % These can be used both for control words that take an argument and
-  % those that do not.  If it is followed by {arg} in the input, then
-  % that will dutifully get written to the index (or wherever).
+  % The above is not enough to reproduce the bug, but it gives the flavor.
   %
-  \def\definedummyword##1{%
-    \expandafter\def\csname ##1\endcsname{\realbackslash ##1\space}%
-  }%
-  \def\definedummyletter##1{%
-    \expandafter\def\csname ##1\endcsname{\realbackslash ##1}%
-  }%
+  % Sample whatsit resulting:
+  % .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}}
+  %
+  % So:
+  \let\endinput = \empty
   %
   % Do the redefinitions.
   \commondummies
 }
 
-% For the aux file, @ is the escape character.  So we want to redefine
-% everything using @ instead of \realbackslash.  When everything uses
-% @, this will be simpler.
+% For the aux and toc files, @ is the escape character.  So we want to
+% redefine everything using @ as the escape character (instead of
+% \realbackslash, still used for index files).  When everything uses @,
+% this will be simpler.
 %
 \def\atdummies{%
   \def\@{@@}%
@@ -3052,144 +4178,168 @@ width0pt\relax} \fi
   \let\{ = \lbraceatcmd
   \let\} = \rbraceatcmd
   %
-  % (See comments in \indexdummies.)
-  \def\definedummyword##1{%
-    \expandafter\def\csname ##1\endcsname{@##1\space}%
-  }%
-  \def\definedummyletter##1{%
-    \expandafter\def\csname ##1\endcsname{@##1}%
-  }%
-  %
   % Do the redefinitions.
   \commondummies
+  \otherbackslash
 }
 
-% Called from \indexdummies and \atdummies.  \definedummyword and
-% \definedummyletter must be defined first.
+% Called from \indexdummies and \atdummies.
 %
 \def\commondummies{%
   %
-  \normalturnoffactive
+  % \definedummyword defines \#1 as \string\#1\space, thus effectively
+  % preventing its expansion.  This is used only for control% words,
+  % not control letters, because the \space would be incorrect for
+  % control characters, but is needed to separate the control word
+  % from whatever follows.
+  %
+  % For control letters, we have \definedummyletter, which omits the
+  % space.
+  %
+  % These can be used both for control words that take an argument and
+  % those that do not.  If it is followed by {arg} in the input, then
+  % that will dutifully get written to the index (or wherever).
+  %
+  \def\definedummyword  ##1{\def##1{\string##1\space}}%
+  \def\definedummyletter##1{\def##1{\string##1}}%
+  \let\definedummyaccent\definedummyletter
   %
   \commondummiesnofonts
   %
-  \definedummyletter{_}%
+  \definedummyletter\_%
   %
   % Non-English letters.
-  \definedummyword{AA}%
-  \definedummyword{AE}%
-  \definedummyword{L}%
-  \definedummyword{OE}%
-  \definedummyword{O}%
-  \definedummyword{aa}%
-  \definedummyword{ae}%
-  \definedummyword{l}%
-  \definedummyword{oe}%
-  \definedummyword{o}%
-  \definedummyword{ss}%
-  \definedummyword{exclamdown}%
-  \definedummyword{questiondown}%
-  \definedummyword{ordf}%
-  \definedummyword{ordm}%
+  \definedummyword\AA
+  \definedummyword\AE
+  \definedummyword\DH
+  \definedummyword\L
+  \definedummyword\O
+  \definedummyword\OE
+  \definedummyword\TH
+  \definedummyword\aa
+  \definedummyword\ae
+  \definedummyword\dh
+  \definedummyword\exclamdown
+  \definedummyword\l
+  \definedummyword\o
+  \definedummyword\oe
+  \definedummyword\ordf
+  \definedummyword\ordm
+  \definedummyword\questiondown
+  \definedummyword\ss
+  \definedummyword\th
   %
   % Although these internal commands shouldn't show up, sometimes they do.
-  \definedummyword{bf}%
-  \definedummyword{gtr}%
-  \definedummyword{hat}%
-  \definedummyword{less}%
-  \definedummyword{sf}%
-  \definedummyword{sl}%
-  \definedummyword{tclose}%
-  \definedummyword{tt}%
-  %
-  \definedummyword{LaTeX}%
-  \definedummyword{TeX}%
+  \definedummyword\bf
+  \definedummyword\gtr
+  \definedummyword\hat
+  \definedummyword\less
+  \definedummyword\sf
+  \definedummyword\sl
+  \definedummyword\tclose
+  \definedummyword\tt
+  %
+  \definedummyword\LaTeX
+  \definedummyword\TeX
   %
   % Assorted special characters.
-  \definedummyword{bullet}%
-  \definedummyword{copyright}%
-  \definedummyword{registeredsymbol}%
-  \definedummyword{dots}%
-  \definedummyword{enddots}%
-  \definedummyword{equiv}%
-  \definedummyword{error}%
-  \definedummyword{expansion}%
-  \definedummyword{minus}%
-  \definedummyword{pounds}%
-  \definedummyword{point}%
-  \definedummyword{print}%
-  \definedummyword{result}%
+  \definedummyword\bullet
+  \definedummyword\comma
+  \definedummyword\copyright
+  \definedummyword\registeredsymbol
+  \definedummyword\dots
+  \definedummyword\enddots
+  \definedummyword\equiv
+  \definedummyword\error
+  \definedummyword\euro
+  \definedummyword\guillemetleft
+  \definedummyword\guillemetright
+  \definedummyword\guilsinglleft
+  \definedummyword\guilsinglright
+  \definedummyword\expansion
+  \definedummyword\minus
+  \definedummyword\ogonek
+  \definedummyword\pounds
+  \definedummyword\point
+  \definedummyword\print
+  \definedummyword\quotedblbase
+  \definedummyword\quotedblleft
+  \definedummyword\quotedblright
+  \definedummyword\quoteleft
+  \definedummyword\quoteright
+  \definedummyword\quotesinglbase
+  \definedummyword\result
+  \definedummyword\textdegree
+  %
+  % We want to disable all macros so that they are not expanded by \write.
+  \macrolist
+  %
+  \normalturnoffactive
   %
   % Handle some cases of @value -- where it does not contain any
   % (non-fully-expandable) commands.
   \makevalueexpandable
-  %
-  % Normal spaces, not active ones.
-  \unsepspaces
-  %
-  % No macro expansion.
-  \turnoffmacros
 }
 
 % \commondummiesnofonts: common to \commondummies and \indexnofonts.
 %
-% Better have this without active chars.
-{
-  \catcode`\~=\other
-  \gdef\commondummiesnofonts{%
-    % Control letters and accents.
-    \definedummyletter{!}%
-    \definedummyletter{"}%
-    \definedummyletter{'}%
-    \definedummyletter{*}%
-    \definedummyletter{,}%
-    \definedummyletter{.}%
-    \definedummyletter{/}%
-    \definedummyletter{:}%
-    \definedummyletter{=}%
-    \definedummyletter{?}%
-    \definedummyletter{^}%
-    \definedummyletter{`}%
-    \definedummyletter{~}%
-    \definedummyword{u}%
-    \definedummyword{v}%
-    \definedummyword{H}%
-    \definedummyword{dotaccent}%
-    \definedummyword{ringaccent}%
-    \definedummyword{tieaccent}%
-    \definedummyword{ubaraccent}%
-    \definedummyword{udotaccent}%
-    \definedummyword{dotless}%
-    %
-    % Texinfo font commands.
-    \definedummyword{b}%
-    \definedummyword{i}%
-    \definedummyword{r}%
-    \definedummyword{sc}%
-    \definedummyword{t}%
-    %
-    % Commands that take arguments.
-    \definedummyword{acronym}%
-    \definedummyword{cite}%
-    \definedummyword{code}%
-    \definedummyword{command}%
-    \definedummyword{dfn}%
-    \definedummyword{emph}%
-    \definedummyword{env}%
-    \definedummyword{file}%
-    \definedummyword{kbd}%
-    \definedummyword{key}%
-    \definedummyword{math}%
-    \definedummyword{option}%
-    \definedummyword{samp}%
-    \definedummyword{strong}%
-    \definedummyword{tie}%
-    \definedummyword{uref}%
-    \definedummyword{url}%
-    \definedummyword{var}%
-    \definedummyword{verb}%
-    \definedummyword{w}%
-  }
+\def\commondummiesnofonts{%
+  % Control letters and accents.
+  \definedummyletter\!%
+  \definedummyaccent\"%
+  \definedummyaccent\'%
+  \definedummyletter\*%
+  \definedummyaccent\,%
+  \definedummyletter\.%
+  \definedummyletter\/%
+  \definedummyletter\:%
+  \definedummyaccent\=%
+  \definedummyletter\?%
+  \definedummyaccent\^%
+  \definedummyaccent\`%
+  \definedummyaccent\~%
+  \definedummyword\u
+  \definedummyword\v
+  \definedummyword\H
+  \definedummyword\dotaccent
+  \definedummyword\ogonek
+  \definedummyword\ringaccent
+  \definedummyword\tieaccent
+  \definedummyword\ubaraccent
+  \definedummyword\udotaccent
+  \definedummyword\dotless
+  %
+  % Texinfo font commands.
+  \definedummyword\b
+  \definedummyword\i
+  \definedummyword\r
+  \definedummyword\sc
+  \definedummyword\t
+  %
+  % Commands that take arguments.
+  \definedummyword\acronym
+  \definedummyword\cite
+  \definedummyword\code
+  \definedummyword\command
+  \definedummyword\dfn
+  \definedummyword\emph
+  \definedummyword\env
+  \definedummyword\file
+  \definedummyword\kbd
+  \definedummyword\key
+  \definedummyword\math
+  \definedummyword\option
+  \definedummyword\pxref
+  \definedummyword\ref
+  \definedummyword\samp
+  \definedummyword\strong
+  \definedummyword\tie
+  \definedummyword\uref
+  \definedummyword\url
+  \definedummyword\var
+  \definedummyword\verb
+  \definedummyword\w
+  \definedummyword\xref
 }
 
 % \indexnofonts is used when outputting the strings to sort the index
@@ -3198,10 +4348,12 @@ width0pt\relax} \fi
 % would be for a given command (usually its argument).
 %
 \def\indexnofonts{%
-  \def\definedummyword##1{%
-    \expandafter\let\csname ##1\endcsname\asis
-  }%
-  \let\definedummyletter=\definedummyword
+  % Accent commands should become @asis.
+  \def\definedummyaccent##1{\let##1\asis}%
+  % We can just ignore other control letters.
+  \def\definedummyletter##1{\let##1\empty}%
+  % Hopefully, all control words can become @asis.
+  \let\definedummyword\definedummyaccent
   %
   \commondummiesnofonts
   %
@@ -3218,19 +4370,23 @@ width0pt\relax} \fi
   % Non-English letters.
   \def\AA{AA}%
   \def\AE{AE}%
+  \def\DH{DZZ}%
   \def\L{L}%
   \def\OE{OE}%
   \def\O{O}%
+  \def\TH{ZZZ}%
   \def\aa{aa}%
   \def\ae{ae}%
+  \def\dh{dzz}%
+  \def\exclamdown{!}%
   \def\l{l}%
   \def\oe{oe}%
-  \def\o{o}%
-  \def\ss{ss}%
-  \def\exclamdown{!}%
-  \def\questiondown{?}%
   \def\ordf{a}%
   \def\ordm{o}%
+  \def\o{o}%
+  \def\questiondown{?}%
+  \def\ss{ss}%
+  \def\th{zzz}%
   %
   \def\LaTeX{LaTeX}%
   \def\TeX{TeX}%
@@ -3238,18 +4394,43 @@ width0pt\relax} \fi
   % Assorted special characters.
   % (The following {} will end up in the sort string, but that's ok.)
   \def\bullet{bullet}%
+  \def\comma{,}%
   \def\copyright{copyright}%
   \def\registeredsymbol{R}%
   \def\dots{...}%
   \def\enddots{...}%
   \def\equiv{==}%
   \def\error{error}%
+  \def\euro{euro}%
+  \def\guillemetleft{<<}%
+  \def\guillemetright{>>}%
+  \def\guilsinglleft{<}%
+  \def\guilsinglright{>}%
   \def\expansion{==>}%
   \def\minus{-}%
   \def\pounds{pounds}%
   \def\point{.}%
   \def\print{-|}%
+  \def\quotedblbase{"}%
+  \def\quotedblleft{"}%
+  \def\quotedblright{"}%
+  \def\quoteleft{`}%
+  \def\quoteright{'}%
+  \def\quotesinglbase{,}%
   \def\result{=>}%
+  \def\textdegree{degrees}%
+  %
+  % We need to get rid of all macros, leaving only the arguments (if present).
+  % Of course this is not nearly correct, but it is the best we can do for now.
+  % makeinfo does not expand macros in the argument to @deffn, which ends up
+  % writing an index entry, and texindex isn't prepared for an index sort entry
+  % that starts with \.
+  %
+  % Since macro invocations are followed by braces, we can just redefine them
+  % to take a single TeX argument.  The case of a macro invocation that
+  % goes to end-of-line is not handled.
+  %
+  \macrolist
 }
 
 \let\indexbackslash=0  %overridden during \printindex.
@@ -3277,11 +4458,7 @@ width0pt\relax} \fi
     %
     \edef\writeto{\csname#1indfile\endcsname}%
     %
-    \ifvmode
-      \dosubindsanitize
-    \else
-      \dosubindwrite
-    \fi
+    \safewhatsit\dosubindwrite
   }%
   \fi
 }
@@ -3296,7 +4473,6 @@ width0pt\relax} \fi
   %
   % Remember, we are within a group.
   \indexdummies % Must do this here, since \bf, etc expand at this stage
-  \escapechar=`\\
   \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now
       % so it will be output as is; and it will print as backslash.
   %
@@ -3319,13 +4495,13 @@ width0pt\relax} \fi
   \temp
 }
 
-% Take care of unwanted page breaks:
+% Take care of unwanted page breaks/skips around a whatsit:
 %
 % If a skip is the last thing on the list now, preserve it
 % by backing up by \lastskip, doing the \write, then inserting
 % the skip again.  Otherwise, the whatsit generated by the
-% \write will make \lastskip zero.  The result is that sequences
-% like this:
+% \write or \pdfdest will make \lastskip zero.  The result is that
+% sequences like this:
 % @end defun
 % @tindex whatever
 % @defun ...
@@ -3349,44 +4525,52 @@ width0pt\relax} \fi
 %
 \edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname}
 %
+\newskip\whatsitskip
+\newcount\whatsitpenalty
+%
 % ..., ready, GO:
 %
-\def\dosubindsanitize{%
+\def\safewhatsit#1{%
+\ifhmode
+  #1%
+\else
   % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
-  \skip0 = \lastskip
+  \whatsitskip = \lastskip
   \edef\lastskipmacro{\the\lastskip}%
-  \count255 = \lastpenalty
+  \whatsitpenalty = \lastpenalty
   %
   % If \lastskip is nonzero, that means the last item was a
   % skip.  And since a skip is discardable, that means this
-  % -\skip0 glue we're inserting is preceded by a
+  % -\whatsitskip glue we're inserting is preceded by a
   % non-discardable item, therefore it is not a potential
   % breakpoint, therefore no \nobreak needed.
   \ifx\lastskipmacro\zeroskipmacro
   \else
-    \vskip-\skip0
+    \vskip-\whatsitskip
   \fi
   %
-  \dosubindwrite
+  #1%
   %
   \ifx\lastskipmacro\zeroskipmacro
-    % if \lastskip was zero, perhaps the last item was a
-    % penalty, and perhaps it was >=10000, e.g., a \nobreak.
-    % In that case, we want to re-insert the penalty; since we
-    % just inserted a non-discardable item, any following glue
-    % (such as a \parskip) would be a breakpoint.  For example:
+    % If \lastskip was zero, perhaps the last item was a penalty, and
+    % perhaps it was >=10000, e.g., a \nobreak.  In that case, we want
+    % to re-insert the same penalty (values >10000 are used for various
+    % signals); since we just inserted a non-discardable item, any
+    % following glue (such as a \parskip) would be a breakpoint.  For example:
+    %
     %   @deffn deffn-whatever
     %   @vindex index-whatever
     %   Description.
     % would allow a break between the index-whatever whatsit
     % and the "Description." paragraph.
-    \ifnum\count255>9999 \nobreak \fi
+    \ifnum\whatsitpenalty>9999 \penalty\whatsitpenalty \fi
   \else
     % On the other hand, if we had a nonzero \lastskip,
     % this make-up glue would be preceded by a non-discardable item
     % (the whatsit from the \write), so we must insert a \nobreak.
-    \nobreak\vskip\skip0
+    \nobreak\vskip\whatsitskip
   \fi
+\fi
 }
 
 % The index entry written in the file actually looks like
@@ -3429,6 +4613,7 @@ width0pt\relax} \fi
   %
   \smallfonts \rm
   \tolerance = 9500
+  \plainfrenchspacing
   \everypar = {}% don't want the \kern\-parindent from indentation suppression.
   %
   % See if the index file exists and is nonempty.
@@ -3478,7 +4663,10 @@ width0pt\relax} \fi
   \removelastskip
   %
   % We like breaks before the index initials, so insert a bonus.
-  \penalty -300
+  \nobreak
+  \vskip 0pt plus 3\baselineskip
+  \penalty 0
+  \vskip 0pt plus -3\baselineskip
   %
   % Typeset the initial.  Making this add up to a whole number of
   % baselineskips increases the chance of the dots lining up from column
@@ -3488,10 +4676,9 @@ width0pt\relax} \fi
   % No shrink because it confuses \balancecolumns.
   \vskip 1.67\baselineskip plus .5\baselineskip
   \leftline{\secbf #1}%
-  \vskip .33\baselineskip plus .1\baselineskip
-  %
   % Do our best not to break after the initial.
   \nobreak
+  \vskip .33\baselineskip plus .1\baselineskip
 }}
 
 % \entry typesets a paragraph consisting of the text (#1), dot leaders, and
@@ -3500,10 +4687,10 @@ width0pt\relax} \fi
 %
 % A straightforward implementation would start like this:
 %	\def\entry#1#2{...
-% But this frozes the catcodes in the argument, and can cause problems to
+% But this freezes the catcodes in the argument, and can cause problems to
 % @code, which sets - active.  This problem was fixed by a kludge---
 % ``-'' was active throughout whole index, but this isn't really right.
-% 
+%
 % The right solution is to prevent \entry from swallowing the whole text.
 %                                 --kasal, 21nov03
 \def\entry{%
@@ -3556,11 +4743,8 @@ width0pt\relax} \fi
     % The following is kludged to not output a line of dots in the index if
     % there are no page numbers.  The next person who breaks this will be
     % cursed by a Unix daemon.
-    \def\tempa{{\rm }}%
-    \def\tempb{#1}%
-    \edef\tempc{\tempa}%
-    \edef\tempd{\tempb}%
-    \ifx\tempc\tempd
+    \setbox\boxA = \hbox{#1}%
+    \ifdim\wd\boxA = 0pt
       \ %
     \else
       %
@@ -3584,9 +4768,9 @@ width0pt\relax} \fi
   \endgroup
 }
 
-% Like \dotfill except takes at least 1 em.
+% Like plain.tex's \dotfill, except uses up at least 1 em.
 \def\indexdotfill{\cleaders
-  \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill}
+  \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1fill}
 
 \def\primary #1{\line{#1\hfil}}
 
@@ -3696,6 +4880,34 @@ width0pt\relax} \fi
 %
 % All done with double columns.
 \def\enddoublecolumns{%
+  % The following penalty ensures that the page builder is exercised
+  % _before_ we change the output routine.  This is necessary in the
+  % following situation:
+  %
+  % The last section of the index consists only of a single entry.
+  % Before this section, \pagetotal is less than \pagegoal, so no
+  % break occurs before the last section starts.  However, the last
+  % section, consisting of \initial and the single \entry, does not
+  % fit on the page and has to be broken off.  Without the following
+  % penalty the page builder will not be exercised until \eject
+  % below, and by that time we'll already have changed the output
+  % routine to the \balancecolumns version, so the next-to-last
+  % double-column page will be processed with \balancecolumns, which
+  % is wrong:  The two columns will go to the main vertical list, with
+  % the broken-off section in the recent contributions.  As soon as
+  % the output routine finishes, TeX starts reconsidering the page
+  % break.  The two columns and the broken-off section both fit on the
+  % page, because the two columns now take up only half of the page
+  % goal.  When TeX sees \eject from below which follows the final
+  % section, it invokes the new output routine that we've set after
+  % \balancecolumns below; \onepageout will try to fit the two columns
+  % and the final section into the vbox of \pageheight (see
+  % \pagebody), causing an overfull box.
+  %
+  % Note that glue won't work here, because glue does not exercise the
+  % page builder, unlike penalties (see The TeXbook, pp. 280-281).
+  \penalty0
+  %
   \output = {%
     % Split the last of the double-column material.  Leave it on the
     % current page, no automatic page break.
@@ -3769,7 +4981,7 @@ width0pt\relax} \fi
 % We do the following ugly conditional instead of the above simple
 % construct for the sake of pdftex, which needs the actual
 % letter in the expansion, not just typeset.
-% 
+%
 \def\appendixletter{%
   \ifnum\appendixno=`A A%
   \else\ifnum\appendixno=`B B%
@@ -3805,11 +5017,15 @@ width0pt\relax} \fi
   \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
   \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
 
-% Each @chapter defines this as the name of the chapter.
-% page headings and footings can use it.  @section does likewise.
-% However, they are not reliable, because we don't use marks.
+% Each @chapter defines these (using marks) as the number+name, number
+% and name of the chapter.  Page headings and footings can use
+% these.  @section does likewise.
 \def\thischapter{}
+\def\thischapternum{}
+\def\thischaptername{}
 \def\thissection{}
+\def\thissectionnum{}
+\def\thissectionname{}
 
 \newcount\absseclevel % used to calculate proper heading level
 \newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
@@ -3822,60 +5038,95 @@ width0pt\relax} \fi
 \def\lowersections{\global\advance\secbase by 1}
 \let\down=\lowersections % original BFox name
 
-% Choose a numbered-heading macro
-% #1 is heading level if unmodified by @raisesections or @lowersections
-% #2 is text for heading
-\def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
-\ifcase\absseclevel
-      \chapterzzz{#2}%
-  \or \seczzz{#2}%
-  \or \numberedsubseczzz{#2}%
-  \or \numberedsubsubseczzz{#2}%
+% we only have subsub.
+\chardef\maxseclevel = 3
+%
+% A numbered section within an unnumbered changes to unnumbered too.
+% To achive this, remember the "biggest" unnum. sec. we are currently in:
+\chardef\unmlevel = \maxseclevel
+%
+% Trace whether the current chapter is an appendix or not:
+% \chapheadtype is "N" or "A", unnumbered chapters are ignored.
+\def\chapheadtype{N}
+
+% Choose a heading macro
+% #1 is heading type
+% #2 is heading level
+% #3 is text for heading
+\def\genhead#1#2#3{%
+  % Compute the abs. sec. level:
+  \absseclevel=#2
+  \advance\absseclevel by \secbase
+  % Make sure \absseclevel doesn't fall outside the range:
+  \ifnum \absseclevel < 0
+    \absseclevel = 0
   \else
-    \ifnum \absseclevel<0 \chapterzzz{#2}%
-    \else \numberedsubsubseczzz{#2}%
+    \ifnum \absseclevel > 3
+      \absseclevel = 3
     \fi
   \fi
-  \suppressfirstparagraphindent
-}
-
-% like \numhead, but chooses appendix heading levels
-\def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
-\ifcase\absseclevel
-      \appendixzzz{#2}%
-  \or \appendixsectionzzz{#2}%
-  \or \appendixsubseczzz{#2}%
-  \or \appendixsubsubseczzz{#2}%
+  % The heading type:
+  \def\headtype{#1}%
+  \if \headtype U%
+    \ifnum \absseclevel < \unmlevel
+      \chardef\unmlevel = \absseclevel
+    \fi
   \else
-    \ifnum \absseclevel<0 \appendixzzz{#2}%
-    \else \appendixsubsubseczzz{#2}%
+    % Check for appendix sections:
+    \ifnum \absseclevel = 0
+      \edef\chapheadtype{\headtype}%
+    \else
+      \if \headtype A\if \chapheadtype N%
+	\errmessage{@appendix... within a non-appendix chapter}%
+      \fi\fi
+    \fi
+    % Check for numbered within unnumbered:
+    \ifnum \absseclevel > \unmlevel
+      \def\headtype{U}%
+    \else
+      \chardef\unmlevel = 3
     \fi
   \fi
-  \suppressfirstparagraphindent
-}
-
-% like \numhead, but chooses numberless heading levels
-\def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
-  \ifcase\absseclevel
-      \unnumberedzzz{#2}%
-  \or \unnumberedseczzz{#2}%
-  \or \unnumberedsubseczzz{#2}%
-  \or \unnumberedsubsubseczzz{#2}%
+  % Now print the heading:
+  \if \headtype U%
+    \ifcase\absseclevel
+	\unnumberedzzz{#3}%
+    \or \unnumberedseczzz{#3}%
+    \or \unnumberedsubseczzz{#3}%
+    \or \unnumberedsubsubseczzz{#3}%
+    \fi
   \else
-    \ifnum \absseclevel<0 \unnumberedzzz{#2}%
-    \else \unnumberedsubsubseczzz{#2}%
+    \if \headtype A%
+      \ifcase\absseclevel
+	  \appendixzzz{#3}%
+      \or \appendixsectionzzz{#3}%
+      \or \appendixsubseczzz{#3}%
+      \or \appendixsubsubseczzz{#3}%
+      \fi
+    \else
+      \ifcase\absseclevel
+	  \chapterzzz{#3}%
+      \or \seczzz{#3}%
+      \or \numberedsubseczzz{#3}%
+      \or \numberedsubsubseczzz{#3}%
+      \fi
     \fi
   \fi
   \suppressfirstparagraphindent
 }
 
+% an interface:
+\def\numhead{\genhead N}
+\def\apphead{\genhead A}
+\def\unnmhead{\genhead U}
+
 % @chapter, @appendix, @unnumbered.  Increment top-level counter, reset
 % all lower-level sectioning counters to zero.
-% 
+%
 % Also set \chaplevelprefix, which we prepend to @float sequence numbers
 % (e.g., figures), q.v.  By default (before any chapter), that is empty.
 \let\chaplevelprefix = \empty
-% 
+%
 \outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz
 \def\chapterzzz#1{%
   % section resetting is \global in case the chapter is in a group, such
@@ -3887,7 +5138,9 @@ width0pt\relax} \fi
   \gdef\chaplevelprefix{\the\chapno.}%
   \resetallfloatnos
   %
-  \message{\putwordChapter\space \the\chapno}%
+  % \putwordChapter can contain complex things in translations.
+  \toks0=\expandafter{\putwordChapter}%
+  \message{\the\toks0 \space \the\chapno}%
   %
   % Write the actual heading.
   \chapmacro{#1}{Ynumbered}{\the\chapno}%
@@ -3898,15 +5151,17 @@ width0pt\relax} \fi
   \global\let\subsubsection = \numberedsubsubsec
 }
 
-\outer\parseargdef\appendix{\apphead0{#1}} % normally apphead0 calls appendixzzz
+\outer\parseargdef\appendix{\apphead0{#1}} % normally calls appendixzzz
+%
 \def\appendixzzz#1{%
   \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
     \global\advance\appendixno by 1
   \gdef\chaplevelprefix{\appendixletter.}%
   \resetallfloatnos
   %
-  \def\appendixnum{\putwordAppendix\space \appendixletter}%
-  \message{\appendixnum}%
+  % \putwordAppendix can contain complex things in translations.
+  \toks0=\expandafter{\putwordAppendix}%
+  \message{\the\toks0 \space \appendixletter}%
   %
   \chapmacro{#1}{Yappendix}{\appendixletter}%
   %
@@ -3915,9 +5170,6 @@ width0pt\relax} \fi
   \global\let\subsubsection = \appendixsubsubsec
 }
 
-% @centerchap is like @unnumbered, but the heading is centered.
-\outer\parseargdef\centerchap{{\unnumberedyyy{#1}}}
-
 \outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
 \def\unnumberedzzz#1{%
   \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
@@ -3948,6 +5200,16 @@ width0pt\relax} \fi
   \global\let\subsubsection = \unnumberedsubsubsec
 }
 
+% @centerchap is like @unnumbered, but the heading is centered.
+\outer\parseargdef\centerchap{%
+  % Well, we could do the following in a group, but that would break
+  % an assumption that \chapmacro is called at the outermost level.
+  % Thus we are safer this way:		--kasal, 24feb04
+  \let\centerparametersmaybe = \centerparameters
+  \unnmhead0{#1}%
+  \let\centerparametersmaybe = \relax
+}
+
 % @top is like @unnumbered.
 \let\top\unnumbered
 
@@ -4014,24 +5276,6 @@ width0pt\relax} \fi
                  {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
 }
 
-% These are variants which are not "outer", so they can appear in @ifinfo.
-% Actually, they are now be obsolete; ordinary section commands should work.
-\def\infotop{\parsearg\unnumberedzzz}
-\def\infounnumbered{\parsearg\unnumberedzzz}
-\def\infounnumberedsec{\parsearg\unnumberedseczzz}
-\def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz}
-\def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz}
-
-\def\infoappendix{\parsearg\appendixzzz}
-\def\infoappendixsec{\parsearg\appendixseczzz}
-\def\infoappendixsubsec{\parsearg\appendixsubseczzz}
-\def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz}
-
-\def\infochapter{\parsearg\chapterzzz}
-\def\infosection{\parsearg\sectionzzz}
-\def\infosubsection{\parsearg\subsectionzzz}
-\def\infosubsubsection{\parsearg\subsubsectionzzz}
-
 % These macros control what the section commands do, according
 % to what kind of chapter we are in (ordinary, appendix, or unnumbered).
 % Define them by default for a numbered chapter.
@@ -4049,7 +5293,6 @@ width0pt\relax} \fi
 %       3) Likewise, headings look best if no \parindent is used, and
 %          if justification is not attempted.  Hence \raggedright.
 
-
 \def\majorheading{%
   {\advance\chapheadingskip by 10pt \chapbreak }%
   \parsearg\chapheadingzzz
@@ -4058,8 +5301,8 @@ width0pt\relax} \fi
 \def\chapheading{\chapbreak \parsearg\chapheadingzzz}
 \def\chapheadingzzz#1{%
   {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
-                    \parindent=0pt\raggedright
-                    \rm #1\hfill}}%
+                    \parindent=0pt\ptexraggedright
+                    \rmisbold #1\hfill}}%
   \bigskip \par\penalty 200\relax
   \suppressfirstparagraphindent
 }
@@ -4079,8 +5322,6 @@ width0pt\relax} \fi
 %%% Args are the skip and penalty (usually negative)
 \def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
 
-\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
-
 %%% Define plain chapter starts, and page on/off switching for it
 % Parameter controlling skip before chapter headings (if needed)
 
@@ -4088,7 +5329,20 @@ width0pt\relax} \fi
 
 \def\chapbreak{\dobreak \chapheadingskip {-4000}}
 \def\chappager{\par\vfill\supereject}
-\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi}
+% Because \domark is called before \chapoddpage, the filler page will
+% get the headings for the next chapter, which is wrong.  But we don't
+% care -- we just disable all headings on the filler page.
+\def\chapoddpage{%
+  \chappager
+  \ifodd\pageno \else
+    \begingroup
+      \evenheadline={\hfil}\evenfootline={\hfil}%
+      \oddheadline={\hfil}\oddfootline={\hfil}%
+      \hbox to 0pt{}%
+      \chappager
+    \endgroup
+  \fi
+}
 
 \def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
 
@@ -4111,56 +5365,89 @@ width0pt\relax} \fi
 
 \CHAPPAGon
 
-\def\CHAPFplain{%
-\global\let\chapmacro=\chfplain
-\global\let\centerchapmacro=\centerchfplain}
-
-% Normal chapter opening.
-% 
+% Chapter opening.
+%
 % #1 is the text, #2 is the section type (Ynumbered, Ynothing,
 % Yappendix, Yomitfromtoc), #3 the chapter number.
-% 
+%
 % To test against our argument.
 \def\Ynothingkeyword{Ynothing}
 \def\Yomitfromtockeyword{Yomitfromtoc}
 \def\Yappendixkeyword{Yappendix}
 %
-\def\chfplain#1#2#3{%
+\def\chapmacro#1#2#3{%
+  % Insert the first mark before the heading break (see notes for \domark).
+  \let\prevchapterdefs=\lastchapterdefs
+  \let\prevsectiondefs=\lastsectiondefs
+  \gdef\lastsectiondefs{\gdef\thissectionname{}\gdef\thissectionnum{}%
+                        \gdef\thissection{}}%
+  %
+  \def\temptype{#2}%
+  \ifx\temptype\Ynothingkeyword
+    \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
+                          \gdef\thischapter{\thischaptername}}%
+  \else\ifx\temptype\Yomitfromtockeyword
+    \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
+                          \gdef\thischapter{}}%
+  \else\ifx\temptype\Yappendixkeyword
+    \toks0={#1}%
+    \xdef\lastchapterdefs{%
+      \gdef\noexpand\thischaptername{\the\toks0}%
+      \gdef\noexpand\thischapternum{\appendixletter}%
+      % \noexpand\putwordAppendix avoids expanding indigestible
+      % commands in some of the translations.
+      \gdef\noexpand\thischapter{\noexpand\putwordAppendix{}
+                                 \noexpand\thischapternum:
+                                 \noexpand\thischaptername}%
+    }%
+  \else
+    \toks0={#1}%
+    \xdef\lastchapterdefs{%
+      \gdef\noexpand\thischaptername{\the\toks0}%
+      \gdef\noexpand\thischapternum{\the\chapno}%
+      % \noexpand\putwordChapter avoids expanding indigestible
+      % commands in some of the translations.
+      \gdef\noexpand\thischapter{\noexpand\putwordChapter{}
+                                 \noexpand\thischapternum:
+                                 \noexpand\thischaptername}%
+    }%
+  \fi\fi\fi
+  %
+  % Output the mark.  Pass it through \safewhatsit, to take care of
+  % the preceding space.
+  \safewhatsit\domark
+  %
+  % Insert the chapter heading break.
   \pchapsepmacro
+  %
+  % Now the second mark, after the heading break.  No break points
+  % between here and the heading.
+  \let\prevchapterdefs=\lastchapterdefs
+  \let\prevsectiondefs=\lastsectiondefs
+  \domark
+  %
   {%
-    \chapfonts \rm
+    \chapfonts \rmisbold
     %
-    % Have to define \thissection before calling \donoderef, because the
+    % Have to define \lastsection before calling \donoderef, because the
     % xref code eventually uses it.  On the other hand, it has to be called
     % after \pchapsepmacro, or the headline will change too soon.
-    \gdef\thissection{#1}%
-    \gdef\thischaptername{#1}%
+    \gdef\lastsection{#1}%
     %
     % Only insert the separating space if we have a chapter/appendix
     % number, and don't print the unnumbered ``number''.
-    \def\temptype{#2}%
     \ifx\temptype\Ynothingkeyword
       \setbox0 = \hbox{}%
       \def\toctype{unnchap}%
-      \def\thischapter{#1}%
     \else\ifx\temptype\Yomitfromtockeyword
       \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
       \def\toctype{omit}%
-      \xdef\thischapter{}%
     \else\ifx\temptype\Yappendixkeyword
       \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
       \def\toctype{app}%
-      % We don't substitute the actual chapter name into \thischapter
-      % because we don't want its macros evaluated now.  And we don't
-      % use \thissection because that changes with each section.
-      %
-      \xdef\thischapter{\putwordAppendix{} \appendixletter:
-                        \noexpand\thischaptername}%
     \else
       \setbox0 = \hbox{#3\enspace}%
       \def\toctype{numchap}%
-      \xdef\thischapter{\putwordChapter{} \the\chapno:
-                        \noexpand\thischaptername}%
     \fi\fi\fi
     %
     % Write the toc entry for this chapter.  Must come before the
@@ -4176,7 +5463,8 @@ width0pt\relax} \fi
     \donoderef{#2}%
     %
     % Typeset the actual heading.
-    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
+    \nobreak % Avoid page breaks at the interline glue.
+    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright
           \hangindent=\wd0 \centerparametersmaybe
           \unhbox0 #1\par}%
   }%
@@ -4186,45 +5474,40 @@ width0pt\relax} \fi
 
 % @centerchap -- centered and unnumbered.
 \let\centerparametersmaybe = \relax
-\def\centerchfplain#1{{%
-  \def\centerparametersmaybe{%
-    \advance\rightskip by 3\rightskip
-    \leftskip = \rightskip
-    \parfillskip = 0pt
-  }%
-  \chfplain{#1}{Ynothing}{}%
-}}
+\def\centerparameters{%
+  \advance\rightskip by 3\rightskip
+  \leftskip = \rightskip
+  \parfillskip = 0pt
+}
 
-\CHAPFplain % The default
 
 % I don't think this chapter style is supported any more, so I'm not
 % updating it with the new noderef stuff.  We'll see.  --karl, 11aug03.
-% 
+%
+\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
+%
 \def\unnchfopen #1{%
 \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
-                       \parindent=0pt\raggedright
-                       \rm #1\hfill}}\bigskip \par\nobreak
+                       \parindent=0pt\ptexraggedright
+                       \rmisbold #1\hfill}}\bigskip \par\nobreak
 }
-
 \def\chfopen #1#2{\chapoddpage {\chapfonts
 \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
 \par\penalty 5000 %
 }
-
 \def\centerchfopen #1{%
 \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
                        \parindent=0pt
-                       \hfill {\rm #1}\hfill}}\bigskip \par\nobreak
+                       \hfill {\rmisbold #1}\hfill}}\bigskip \par\nobreak
 }
-
 \def\CHAPFopen{%
-\global\let\chapmacro=\chfopen
-\global\let\centerchapmacro=\centerchfopen}
+  \global\let\chapmacro=\chfopen
+  \global\let\centerchapmacro=\centerchfopen}
 
 
 % Section titles.  These macros combine the section number parts and
 % call the generic \sectionheading to do the printing.
-% 
+%
 \newskip\secheadingskip
 \def\secheadingbreak{\dobreak \secheadingskip{-1000}}
 
@@ -4238,52 +5521,113 @@ width0pt\relax} \fi
 
 
 % Print any size, any type, section title.
-% 
+%
 % #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is
 % the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the
 % section number.
-% 
+%
+\def\seckeyword{sec}
+%
 \def\sectionheading#1#2#3#4{%
   {%
     % Switch to the right set of fonts.
-    \csname #2fonts\endcsname \rm
+    \csname #2fonts\endcsname \rmisbold
+    %
+    \def\sectionlevel{#2}%
+    \def\temptype{#3}%
+    %
+    % Insert first mark before the heading break (see notes for \domark).
+    \let\prevsectiondefs=\lastsectiondefs
+    \ifx\temptype\Ynothingkeyword
+      \ifx\sectionlevel\seckeyword
+        \gdef\lastsectiondefs{\gdef\thissectionname{#1}\gdef\thissectionnum{}%
+                              \gdef\thissection{\thissectionname}}%
+      \fi
+    \else\ifx\temptype\Yomitfromtockeyword
+      % Don't redefine \thissection.
+    \else\ifx\temptype\Yappendixkeyword
+      \ifx\sectionlevel\seckeyword
+        \toks0={#1}%
+        \xdef\lastsectiondefs{%
+          \gdef\noexpand\thissectionname{\the\toks0}%
+          \gdef\noexpand\thissectionnum{#4}%
+          % \noexpand\putwordSection avoids expanding indigestible
+          % commands in some of the translations.
+          \gdef\noexpand\thissection{\noexpand\putwordSection{}
+                                     \noexpand\thissectionnum:
+                                     \noexpand\thissectionname}%
+        }%
+      \fi
+    \else
+      \ifx\sectionlevel\seckeyword
+        \toks0={#1}%
+        \xdef\lastsectiondefs{%
+          \gdef\noexpand\thissectionname{\the\toks0}%
+          \gdef\noexpand\thissectionnum{#4}%
+          % \noexpand\putwordSection avoids expanding indigestible
+          % commands in some of the translations.
+          \gdef\noexpand\thissection{\noexpand\putwordSection{}
+                                     \noexpand\thissectionnum:
+                                     \noexpand\thissectionname}%
+        }%
+      \fi
+    \fi\fi\fi
+    %
+    % Go into vertical mode.  Usually we'll already be there, but we
+    % don't want the following whatsit to end up in a preceding paragraph
+    % if the document didn't happen to have a blank line.
+    \par
+    %
+    % Output the mark.  Pass it through \safewhatsit, to take care of
+    % the preceding space.
+    \safewhatsit\domark
     %
     % Insert space above the heading.
     \csname #2headingbreak\endcsname
     %
-    % Only insert the space after the number if we have a section number.
-    \def\sectionlevel{#2}%
-    \def\temptype{#3}%
+    % Now the second mark, after the heading break.  No break points
+    % between here and the heading.
+    \let\prevsectiondefs=\lastsectiondefs
+    \domark
     %
+    % Only insert the space after the number if we have a section number.
     \ifx\temptype\Ynothingkeyword
       \setbox0 = \hbox{}%
       \def\toctype{unn}%
-      \gdef\thissection{#1}%
+      \gdef\lastsection{#1}%
     \else\ifx\temptype\Yomitfromtockeyword
       % for @headings -- no section number, don't include in toc,
-      % and don't redefine \thissection.
+      % and don't redefine \lastsection.
       \setbox0 = \hbox{}%
       \def\toctype{omit}%
       \let\sectionlevel=\empty
     \else\ifx\temptype\Yappendixkeyword
       \setbox0 = \hbox{#4\enspace}%
       \def\toctype{app}%
-      \gdef\thissection{#1}%
+      \gdef\lastsection{#1}%
     \else
       \setbox0 = \hbox{#4\enspace}%
       \def\toctype{num}%
-      \gdef\thissection{#1}%
+      \gdef\lastsection{#1}%
     \fi\fi\fi
     %
-    % Write the toc entry (before \donoderef).  See comments in \chfplain.
+    % Write the toc entry (before \donoderef).  See comments in \chapmacro.
     \writetocentry{\toctype\sectionlevel}{#1}{#4}%
     %
     % Write the node reference (= pdf destination for pdftex).
-    % Again, see comments in \chfplain.
+    % Again, see comments in \chapmacro.
     \donoderef{#3}%
     %
+    % Interline glue will be inserted when the vbox is completed.
+    % That glue will be a valid breakpoint for the page, since it'll be
+    % preceded by a whatsit (usually from the \donoderef, or from the
+    % \writetocentry if there was no node).  We don't want to allow that
+    % break, since then the whatsits could end up on page n while the
+    % section is on page n+1, thus toc/etc. are wrong.  Debian bug 276000.
+    \nobreak
+    %
     % Output the actual section heading.
-    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
+    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright
           \hangindent=\wd0  % zero if no section number
           \unhbox0 #1}%
   }%
@@ -4300,13 +5644,13 @@ width0pt\relax} \fi
   % discardable item.)
   \vskip-\parskip
   %
-  % This \nobreak is purely so the last item on the list is a \penalty
-  % of 10000.  This is so other code, for instance \parsebodycommon, can
-  % check for and avoid allowing breakpoints.  Otherwise, it would
-  % insert a valid breakpoint between:
+  % This is purely so the last item on the list is a known \penalty >
+  % 10000.  This is so \startdefun can avoid allowing breakpoints after
+  % section headings.  Otherwise, it would insert a valid breakpoint between:
+  %
   %   @section sec-whatever
   %   @deffn def-whatever
-  \nobreak
+  \penalty 10001
 }
 
 
@@ -4315,14 +5659,14 @@ width0pt\relax} \fi
 \newwrite\tocfile
 
 % Write an entry to the toc file, opening it if necessary.
-% Called from @chapter, etc.  
-% 
+% Called from @chapter, etc.
+%
 % Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno}
 % We append the current node name (if any) and page number as additional
 % arguments for the \{chap,sec,...}entry macros which will eventually
 % read this.  The node name is used in the pdf outlines as the
 % destination to jump to.
-% 
+%
 % We open the .toc file for writing here instead of at @setfilename (or
 % any other fixed time) so that @contents can be anywhere in the document.
 % But if #1 is `omit', then we don't do anything.  This is used for the
@@ -4340,11 +5684,11 @@ width0pt\relax} \fi
     \fi
     %
     \iflinks
-      \toks0 = {#2}%
-      \toks2 = \expandafter{\lastnode}%
-      \edef\temp{\write\tocfile{\realbackslash #1entry{\the\toks0}{#3}%
-                               {\the\toks2}{\noexpand\folio}}}%
-      \temp
+      {\atdummies
+       \edef\temp{%
+         \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}%
+       \temp
+      }%
     \fi
   \fi
   %
@@ -4357,6 +5701,31 @@ width0pt\relax} \fi
   \ifpdf \global\pdfmakepagedesttrue \fi
 }
 
+
+% These characters do not print properly in the Computer Modern roman
+% fonts, so we must take special care.  This is more or less redundant
+% with the Texinfo input format setup at the end of this file.
+%
+\def\activecatcodes{%
+  \catcode`\"=\active
+  \catcode`\$=\active
+  \catcode`\<=\active
+  \catcode`\>=\active
+  \catcode`\\=\active
+  \catcode`\^=\active
+  \catcode`\_=\active
+  \catcode`\|=\active
+  \catcode`\~=\active
+}
+
+
+% Read the toc file, which is essentially Texinfo input.
+\def\readtocfile{%
+  \setupdatafile
+  \activecatcodes
+  \input \tocreadfilename
+}
+
 \newskip\contentsrightmargin \contentsrightmargin=1in
 \newcount\savepageno
 \newcount\lastnegativepageno \lastnegativepageno = -1
@@ -4373,29 +5742,29 @@ width0pt\relax} \fi
   %
   % Don't need to put `Contents' or `Short Contents' in the headline.
   % It is abundantly clear what they are.
-  \def\thischapter{}%
   \chapmacro{#1}{Yomitfromtoc}{}%
   %
   \savepageno = \pageno
   \begingroup                  % Set up to handle contents files properly.
-    \catcode`\\=0  \catcode`\{=1  \catcode`\}=2  \catcode`\@=11
-    % We can't do this, because then an actual ^ in a section
-    % title fails, e.g., @chapter ^ -- exponentiation.  --karl, 9jul97.
-    %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
-    \raggedbottom             % Worry more about breakpoints than the bottom.
+    \raggedbottom              % Worry more about breakpoints than the bottom.
     \advance\hsize by -\contentsrightmargin % Don't use the full line length.
     %
     % Roman numerals for page numbers.
     \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
 }
 
+% redefined for the two-volume lispref.  We always output on
+% \jobname.toc even if this is redefined.
+%
+\def\tocreadfilename{\jobname.toc}
 
 % Normal (long) toc.
+%
 \def\contents{%
   \startcontents{\putwordTOC}%
-    \openin 1 \jobname.toc
+    \openin 1 \tocreadfilename\space
     \ifeof 1 \else
-      \input \jobname.toc
+      \readtocfile
     \fi
     \vfill \eject
     \contentsalignmacro % in case @setchapternewpage odd is in effect
@@ -4431,9 +5800,9 @@ width0pt\relax} \fi
     \let\numsubsubsecentry = \numsecentry
     \let\appsubsubsecentry = \numsecentry
     \let\unnsubsubsecentry = \numsecentry
-    \openin 1 \jobname.toc
+    \openin 1 \tocreadfilename\space
     \ifeof 1 \else
-      \input \jobname.toc
+      \readtocfile
     \fi
     \closein 1
     \vfill \eject
@@ -4453,7 +5822,7 @@ width0pt\relax} \fi
   % But use \hss just in case.
   % (This space doesn't include the extra space that gets added after
   % the label; that gets put in by \shortchapentry above.)
-  % 
+  %
   % We'd like to right-justify chapter numbers, but that looks strange
   % with appendix letters.  And right-justifying numbers and
   % left-justifying letters looks strange when there is less than 10
@@ -4478,7 +5847,7 @@ width0pt\relax} \fi
 
 % Appendices, in the main contents.
 % Need the word Appendix, and a fixed-size box.
-% 
+%
 \def\appendixbox#1{%
   % We use M since it's probably the widest letter.
   \setbox0 = \hbox{\putwordAppendix{} M}%
@@ -4556,45 +5925,12 @@ width0pt\relax} \fi
 \message{environments,}
 % @foo ... @end foo.
 
-% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
-%
-% Since these characters are used in examples, it should be an even number of
-% \tt widths. Each \tt character is 1en, so two makes it 1em.
-%
-\def\point{$\star$}
-\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
-\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
-\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
-\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
-
-% The @error{} command.
-% Adapted from the TeXbook's \boxit.
-%
-\newbox\errorbox
-%
-{\tentt \global\dimen0 = 3em}% Width of the box.
-\dimen2 = .55pt % Thickness of rules
-% The text. (`r' is open on the right, `e' somewhat less so on the left.)
-\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
-%
-\setbox\errorbox=\hbox to \dimen0{\hfil
-   \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
-   \advance\hsize by -2\dimen2 % Rules.
-   \vbox{%
-      \hrule height\dimen2
-      \hbox{\vrule width\dimen2 \kern3pt          % Space to left of text.
-         \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
-         \kern3pt\vrule width\dimen2}% Space to right.
-      \hrule height\dimen2}
-    \hfil}
-%
-\def\error{\leavevmode\lower.7ex\copy\errorbox}
-
 % @tex ... @end tex    escapes into raw Tex temporarily.
 % One exception: @ is still an escape character, so that @end tex works.
 % But \@ or @@ will get a plain tex @ character.
 
 \envdef\tex{%
+  \setupmarkupstyle{tex}%
   \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
   \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
   \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
@@ -4604,6 +5940,8 @@ width0pt\relax} \fi
   \catcode `\|=\other
   \catcode `\<=\other
   \catcode `\>=\other
+  \catcode`\`=\other
+  \catcode`\'=\other
   \escapechar=`\\
   %
   \let\b=\ptexb
@@ -4623,6 +5961,8 @@ width0pt\relax} \fi
   \let\/=\ptexslash
   \let\*=\ptexstar
   \let\t=\ptext
+  \expandafter \let\csname top\endcsname=\ptextop  % outer
+  \let\frenchspacing=\plainfrenchspacing
   %
   \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
   \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
@@ -4651,7 +5991,8 @@ width0pt\relax} \fi
 % start of the next paragraph will insert \parskip.
 %
 \def\aboveenvbreak{{%
-  % =10000 instead of <10000 because of a special case in \itemzzz, q.v.
+  % =10000 instead of <10000 because of a special case in \itemzzz and
+  % \sectionheading, q.v.
   \ifnum \lastpenalty=10000 \else
     \advance\envskipamount by \parskip
     \endgraf
@@ -4667,7 +6008,8 @@ width0pt\relax} \fi
 
 \let\afterenvbreak = \aboveenvbreak
 
-% \nonarrowing is a flag.  If "set", @lisp etc don't narrow margins.
+% \nonarrowing is a flag.  If "set", @lisp etc don't narrow margins; it will
+% also clear it, so that its embedded environments do the narrowing again.
 \let\nonarrowing=\relax
 
 % @cartouche ... @end cartouche: draw rectangle w/rounded corners around
@@ -4704,7 +6046,7 @@ width0pt\relax} \fi
 				% each corner char, and rule thickness
   \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
   % Flag to tell @lisp, etc., not to narrow margin.
-  \let\nonarrowing=\comment
+  \let\nonarrowing = t%
   \vbox\bgroup
       \baselineskip=0pt\parskip=0pt\lineskip=0pt
       \carttop
@@ -4735,6 +6077,7 @@ width0pt\relax} \fi
 
 % This macro is called at the beginning of all the @example variants,
 % inside a group.
+\newdimen\nonfillparindent
 \def\nonfillstart{%
   \aboveenvbreak
   \hfuzz = 12pt % Don't be fussy
@@ -4742,17 +6085,40 @@ width0pt\relax} \fi
   \let\par = \lisppar % don't ignore blank lines
   \obeylines % each line of input is a line of output
   \parskip = 0pt
+  % Turn off paragraph indentation but redefine \indent to emulate
+  % the normal \indent.
+  \nonfillparindent=\parindent
   \parindent = 0pt
+  \let\indent\nonfillindent
+  %
   \emergencystretch = 0pt % don't try to avoid overfull boxes
-  % @cartouche defines \nonarrowing to inhibit narrowing
-  % at next level down.
   \ifx\nonarrowing\relax
     \advance \leftskip by \lispnarrowing
     \exdentamount=\lispnarrowing
+  \else
+    \let\nonarrowing = \relax
   \fi
   \let\exdent=\nofillexdent
 }
 
+\begingroup
+\obeyspaces
+% We want to swallow spaces (but not other tokens) after the fake
+% @indent in our nonfill-environments, where spaces are normally
+% active and set to @tie, resulting in them not being ignored after
+% @indent.
+\gdef\nonfillindent{\futurelet\temp\nonfillindentcheck}%
+\gdef\nonfillindentcheck{%
+\ifx\temp %
+\expandafter\nonfillindentgobble%
+\else%
+\leavevmode\nonfillindentbox%
+\fi%
+}%
+\endgroup
+\def\nonfillindentgobble#1{\nonfillindent}
+\def\nonfillindentbox{\hbox to \nonfillparindent{\hss}}
+
 % If you want all examples etc. small: @set dispenvsize small.
 % If you want even small examples the full size: @set dispenvsize nosmall.
 % This affects the following displayed environments:
@@ -4763,12 +6129,18 @@ width0pt\relax} \fi
 \let\SETdispenvsize\relax
 \def\setnormaldispenv{%
   \ifx\SETdispenvsize\smallword
+    % end paragraph for sake of leading, in case document has no blank
+    % line.  This is redundant with what happens in \aboveenvbreak, but
+    % we need to do it before changing the fonts, and it's inconvenient
+    % to change the fonts afterward.
+    \ifnum \lastpenalty=10000 \else \endgraf \fi
     \smallexamplefonts \rm
   \fi
 }
 \def\setsmalldispenv{%
   \ifx\SETdispenvsize\nosmallword
   \else
+    \ifnum \lastpenalty=10000 \else \endgraf \fi
     \smallexamplefonts \rm
   \fi
 }
@@ -4795,11 +6167,10 @@ width0pt\relax} \fi
 %
 \maketwodispenvs {lisp}{example}{%
   \nonfillstart
-  \tt
+  \tt\setupmarkupstyle{example}%
   \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
   \gobble       % eat return
 }
-
 % @display/@smalldisplay: same as @lisp except keep current font.
 %
 \makedispenv {display}{%
@@ -4834,12 +6205,36 @@ width0pt\relax} \fi
 \let\Eflushright = \afterenvbreak
 
 
+% @raggedright does more-or-less normal line breaking but no right
+% justification.  From plain.tex.
+\envdef\raggedright{%
+  \rightskip0pt plus2em \spaceskip.3333em \xspaceskip.5em\relax
+}
+\let\Eraggedright\par
+
+\envdef\raggedleft{%
+  \parindent=0pt \leftskip0pt plus2em
+  \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt
+  \hbadness=10000 % Last line will usually be underfull, so turn off
+                  % badness reporting.
+}
+\let\Eraggedleft\par
+
+\envdef\raggedcenter{%
+  \parindent=0pt \rightskip0pt plus1em \leftskip0pt plus1em
+  \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt
+  \hbadness=10000 % Last line will usually be underfull, so turn off
+                  % badness reporting.
+}
+\let\Eraggedcenter\par
+
+
 % @quotation does normal linebreaking (hence we can't use \nonfillstart)
 % and narrows the margins.  We keep \parskip nonzero in general, since
 % we're doing normal filling.  So, when using \aboveenvbreak and
 % \afterenvbreak, temporarily make \parskip 0.
 %
-\envdef\quotation{%
+\def\quotationstart{%
   {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
   \parindent=0pt
   %
@@ -4848,14 +6243,26 @@ width0pt\relax} \fi
     \advance\leftskip by \lispnarrowing
     \advance\rightskip by \lispnarrowing
     \exdentamount = \lispnarrowing
+  \else
     \let\nonarrowing = \relax
   \fi
   \parsearg\quotationlabel
 }
 
+\envdef\quotation{%
+  \setnormaldispenv
+  \quotationstart
+}
+
+\envdef\smallquotation{%
+  \setsmalldispenv
+  \quotationstart
+}
+\let\Esmallquotation = \Equotation
+
 % We have retained a nonzero parskip for the environment, since we're
 % doing normal filling.
-% 
+%
 \def\Equotation{%
   \par
   \ifx\quotationauthor\undefined\else
@@ -4888,18 +6295,16 @@ width0pt\relax} \fi
   \do\ \do\\\do\{\do\}\do\$\do\&%
   \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~%
   \do\<\do\>\do\|\do\@\do+\do\"%
+  % Don't do the quotes -- if we do, @set txicodequoteundirected and
+  % @set txicodequotebacktick will not have effect on @verb and
+  % @verbatim, and ?` and !` ligatures won't get disabled.
+  %\do\`\do\'%
 }
 %
 % [Knuth] p. 380
 \def\uncatcodespecials{%
   \def\do##1{\catcode`##1=\other}\dospecials}
 %
-% [Knuth] pp. 380,381,391
-% Disable Spanish ligatures ?` and !` of \tt font
-\begingroup
-  \catcode`\`=\active\gdef`{\relax\lq}
-\endgroup
-%
 % Setup for the @verb command.
 %
 % Eight spaces for a tab
@@ -4911,7 +6316,7 @@ width0pt\relax} \fi
 \def\setupverb{%
   \tt  % easiest (and conventionally used) font for verbatim
   \def\par{\leavevmode\endgraf}%
-  \catcode`\`=\active
+  \setupmarkupstyle{verb}%
   \tabeightspaces
   % Respect line breaks,
   % print special symbols as themselves, and
@@ -4926,6 +6331,7 @@ width0pt\relax} \fi
 \newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
 %
 \def\starttabbox{\setbox0=\hbox\bgroup}
+%
 \begingroup
   \catcode`\^^I=\active
   \gdef\tabexpand{%
@@ -4939,14 +6345,16 @@ width0pt\relax} \fi
     }%
   }
 \endgroup
+
+% start the verbatim environment.
 \def\setupverbatim{%
+  \let\nonarrowing = t%
   \nonfillstart
-  \advance\leftskip by -\defbodyindent
   % Easiest (and conventionally used) font for verbatim
   \tt
   \def\par{\leavevmode\egroup\box0\endgraf}%
-  \catcode`\`=\active
   \tabexpand
+  \setupmarkupstyle{verbatim}%
   % Respect line breaks,
   % print special symbols as themselves, and
   % make each space count
@@ -5006,14 +6414,14 @@ width0pt\relax} \fi
   {%
     \makevalueexpandable
     \setupverbatim
+    \indexnofonts       % Allow `@@' and other weird things in file names.
     \input #1
     \afterenvbreak
   }%
 }
 
 % @copying ... @end copying.
-% Save the text away for @insertcopying later.  Many commands won't be
-% allowed in this context, but that's ok.
+% Save the text away for @insertcopying later.
 %
 % We save the uninterpreted tokens, rather than creating a box.
 % Saving the text in a box would be much easier, but then all the
@@ -5022,84 +6430,45 @@ width0pt\relax} \fi
 % file; b) letting users define the frontmatter in as flexible order as
 % possible is very desirable.
 %
-\def\copying{\begingroup
-  % Define a command to swallow text until we reach `@end copying'.
-  % \ is the escape char in this texinfo.tex file, so it is the
-  % delimiter for the command; @ will be the escape char when we read
-  % it, but that doesn't matter.
-  \long\def\docopying##1\end copying{\gdef\copyingtext{##1}\enddocopying}%
-  %
-  % We must preserve ^^M's in the input file; see \insertcopying below.
-  \catcode`\^^M = \active
-  \docopying
-}
-
-% What we do to finish off the copying text.
-%
-\def\enddocopying{\endgroup\ignorespaces}
-
-% @insertcopying.  Here we must play games with ^^M's.  On the one hand,
-% we need them to delimit commands such as `@end quotation', so they
-% must be active.  On the other hand, we certainly don't want every
-% end-of-line to be a \par, as would happen with the normal active
-% definition of ^^M.  On the third hand, two ^^M's in a row should still
-% generate a \par.
-%
-% Our approach is to make ^^M insert a space and a penalty1 normally;
-% then it can also check if \lastpenalty=1.  If it does, then manually
-% do \par.
-%
-% This messes up the normal definitions of @c[omment], so we redefine
-% it.  Similarly for @ignore.  (These commands are used in the gcc
-% manual for man page generation.)
-%
-% Seems pretty fragile, most line-oriented commands will presumably
-% fail, but for the limited use of getting the copying text (which
-% should be quite simple) inserted, we can hope it's ok.
-%
-{\catcode`\^^M=\active %
-\gdef\insertcopying{\begingroup %
-  \parindent = 0pt  % looks wrong on title page
-  \def^^M{%
-    \ifnum \lastpenalty=1 %
-      \par %
-    \else %
-      \space \penalty 1 %
-    \fi %
-  }%
-  %
-  % Fix @c[omment] for catcode 13 ^^M's.
-  \def\c##1^^M{\ignorespaces}%
-  \let\comment = \c %
-  %
-  % Don't bother jumping through all the hoops that \doignore does, it
-  % would be very hard since the catcodes are already set.
-  \long\def\ignore##1\end ignore{\ignorespaces}%
-  %
-  \copyingtext %
-\endgroup}%
+\def\copying{\checkenv{}\begingroup\scanargctxt\docopying}
+\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}}
+%
+\def\insertcopying{%
+  \begingroup
+    \parindent = 0pt  % paragraph indentation looks wrong on title page
+    \scanexp\copyingtext
+  \endgroup
 }
 
+
 \message{defuns,}
 % @defun etc.
 
 \newskip\defbodyindent \defbodyindent=.4in
 \newskip\defargsindent \defargsindent=50pt
 \newskip\deflastargmargin \deflastargmargin=18pt
+\newcount\defunpenalty
 
 % Start the processing of @deffn:
 \def\startdefun{%
   \ifnum\lastpenalty<10000
     \medbreak
+    \defunpenalty=10003 % Will keep this @deffn together with the
+                        % following @def command, see below.
   \else
     % If there are two @def commands in a row, we'll have a \nobreak,
     % which is there to keep the function description together with its
     % header.  But if there's nothing but headers, we need to allow a
-    % break somewhere.  Check for penalty 10002 (inserted by
-    % \defargscommonending) instead of 10000, since the sectioning
-    % commands insert a \penalty10000, and we don't want to allow a break
-    % between a section heading and a defun.
-    \ifnum\lastpenalty=10002 \penalty2000 \fi
+    % break somewhere.  Check specifically for penalty 10002, inserted
+    % by \printdefunline, instead of 10000, since the sectioning
+    % commands also insert a nobreak penalty, and we don't want to allow
+    % a break between a section heading and a defun.
+    %
+    % As a minor refinement, we avoid "club" headers by signalling
+    % with penalty of 10003 after the very first @deffn in the
+    % sequence (see above), and penalty of 10002 after any following
+    % @def command.
+    \ifnum\lastpenalty=10002 \penalty2000 \else \defunpenalty=10002 \fi
     %
     % Similarly, after a section heading, do not allow a break.
     % But do insert the glue.
@@ -5117,7 +6486,7 @@ width0pt\relax} \fi
   %
   % As above, allow line break if we have multiple x headers in a row.
   % It's not a great place, though.
-  \ifnum\lastpenalty=10002 \penalty3000 \fi
+  \ifnum\lastpenalty=10002 \penalty3000 \else \defunpenalty=10002 \fi
   %
   % And now, it's time to reuse the body of the original defun:
   \expandafter\gobbledefun#1%
@@ -5135,7 +6504,7 @@ width0pt\relax} \fi
     \advance\rightskip by 0pt plus 1fil
     \endgraf
     \nobreak\vskip -\parskip
-    \penalty 10002  % signal to \startdefun and \dodefunx
+    \penalty\defunpenalty  % signal to \startdefun and \dodefunx
     % Some of the @defun-type tags do not enable magic parentheses,
     % rendering the following check redundant.  But we don't optimize.
     \checkparencounts
@@ -5145,7 +6514,7 @@ width0pt\relax} \fi
 \def\Edefun{\endgraf\medbreak}
 
 % \makedefun{deffn} creates \deffn, \deffnx and \Edeffn;
-% the only thing remainnig is to define \deffnheader.
+% the only thing remaining is to define \deffnheader.
 %
 \def\makedefun#1{%
   \expandafter\let\csname E#1\endcsname = \Edefun
@@ -5258,7 +6627,7 @@ width0pt\relax} \fi
 % #1 is the category, such as "Function".
 % #2 is the return type, if any.
 % #3 is the function name.
-% 
+%
 % We are followed by (but not passed) the arguments, if any.
 %
 \def\defname#1#2#3{%
@@ -5316,15 +6685,15 @@ width0pt\relax} \fi
 % tt for the name.  This is because literal text is sometimes needed in
 % the argument list (groff manual), and ttsl and tt are not very
 % distinguishable.  Prevent hyphenation at `-' chars.
-% 
+%
 \def\defunargs#1{%
-  % use sl by default (not ttsl), 
+  % use sl by default (not ttsl),
   % tt for the names.
   \df \sl \hyphenchar\font=0
   %
   % On the other hand, if an argument has two dashes (for instance), we
   % want a way to get ttsl.  Let's try @var for that.
-  \let\var=\ttslanted
+  \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}%
   #1%
   \sl\hyphenchar\font=45
 }
@@ -5404,12 +6773,14 @@ width0pt\relax} \fi
   \ifnum\parencount=0 \else \badparencount \fi
   \ifnum\brackcount=0 \else \badbrackcount \fi
 }
+% these should not use \errmessage; the glibc manual, at least, actually
+% has such constructs (when documenting function pointers).
 \def\badparencount{%
-  \errmessage{Unbalanced parentheses in @def}%
+  \message{Warning: unbalanced parentheses in @def...}%
   \global\parencount=0
 }
 \def\badbrackcount{%
-  \errmessage{Unbalanced square braces in @def}%
+  \message{Warning: unbalanced square brackets in @def...}%
   \global\brackcount=0
 }
 
@@ -5422,7 +6793,7 @@ width0pt\relax} \fi
 \ifx\eTeXversion\undefined
   \newwrite\macscribble
   \def\scantokens#1{%
-    \toks0={#1\endinput}%
+    \toks0={#1}%
     \immediate\openout\macscribble=\jobname.tmp
     \immediate\write\macscribble{\the\toks0}%
     \immediate\closeout\macscribble
@@ -5435,32 +6806,53 @@ width0pt\relax} \fi
     \newlinechar`\^^M
     \let\xeatspaces\eatspaces
     % Undo catcode changes of \startcontents and \doprintindex
-    \catcode`\@=0 \catcode`\\=\other \escapechar=`\@
+    % When called from @insertcopying or (short)caption, we need active
+    % backslash to get it printed correctly.  Previously, we had
+    % \catcode`\\=\other instead.  We'll see whether a problem appears
+    % with macro expansion.				--kasal, 19aug04
+    \catcode`\@=0 \catcode`\\=\active \escapechar=`\@
     % ... and \example
     \spaceisspace
     %
     % Append \endinput to make sure that TeX does not see the ending newline.
-    %
     % I've verified that it is necessary both for e-TeX and for ordinary TeX
     %							--kasal, 29nov03
     \scantokens{#1\endinput}%
   \endgroup
 }
 
+\def\scanexp#1{%
+  \edef\temp{\noexpand\scanmacro{#1}}%
+  \temp
+}
+
 \newcount\paramno   % Count of parameters
 \newtoks\macname    % Macro name
 \newif\ifrecursive  % Is it recursive?
-\def\macrolist{}    % List of all defined macros in the form
-                    % \do\macro1\do\macro2...
+
+% List of all defined macros in the form
+%    \definedummyword\macro1\definedummyword\macro2...
+% Currently is also contains all @aliases; the list can be split
+% if there is a need.
+\def\macrolist{}
+
+% Add the macro to \macrolist
+\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname}
+\def\addtomacrolistxxx#1{%
+     \toks0 = \expandafter{\macrolist\definedummyword#1}%
+     \xdef\macrolist{\the\toks0}%
+}
 
 % Utility routines.
-% This does \let #1 = #2, except with \csnames.
+% This does \let #1 = #2, with \csnames; that is,
+%   \let \csname#1\endcsname = \csname#2\endcsname
+% (except of course we have to play expansion games).
+%
 \def\cslet#1#2{%
-\expandafter\expandafter
-\expandafter\let
-\expandafter\expandafter
-\csname#1\endcsname
-\csname#2\endcsname}
+  \expandafter\let
+  \csname#1\expandafter\endcsname
+  \csname#2\endcsname
+}
 
 % Trim leading and trailing spaces off a string.
 % Concepts from aro-bend problem 15 (see CTAN).
@@ -5483,34 +6875,45 @@ width0pt\relax} \fi
 % all characters are catcode 10, 11 or 12, except \ which is active
 % (as in normal texinfo). It is necessary to change the definition of \.
 
+% Non-ASCII encodings make 8-bit characters active, so un-activate
+% them to avoid their expansion.  Must do this non-globally, to
+% confine the change to the current group.
+
 % It's necessary to have hard CRs when the macro is executed. This is
 % done by  making ^^M (\endlinechar) catcode 12 when reading the macro
 % body, and then making it the \newlinechar in \scanmacro.
 
-\def\macrobodyctxt{%
-  \catcode`\~=\other
+\def\scanctxt{%
+  \catcode`\"=\other
+  \catcode`\+=\other
+  \catcode`\<=\other
+  \catcode`\>=\other
+  \catcode`\@=\other
   \catcode`\^=\other
   \catcode`\_=\other
   \catcode`\|=\other
-  \catcode`\<=\other
-  \catcode`\>=\other
-  \catcode`\+=\other
+  \catcode`\~=\other
+  \ifx\declaredencoding\ascii \else \setnonasciicharscatcodenonglobal\other \fi
+}
+
+\def\scanargctxt{%
+  \scanctxt
+  \catcode`\\=\other
+  \catcode`\^^M=\other
+}
+
+\def\macrobodyctxt{%
+  \scanctxt
   \catcode`\{=\other
   \catcode`\}=\other
-  \catcode`\@=\other
   \catcode`\^^M=\other
-  \usembodybackslash}
+  \usembodybackslash
+}
 
 \def\macroargctxt{%
-  \catcode`\~=\other
-  \catcode`\^=\other
-  \catcode`\_=\other
-  \catcode`\|=\other
-  \catcode`\<=\other
-  \catcode`\>=\other
-  \catcode`\+=\other
-  \catcode`\@=\other
-  \catcode`\\=\other}
+  \scanctxt
+  \catcode`\\=\other
+}
 
 % \mbodybackslash is the definition of \ in @macro bodies.
 % It maps \foo\ => \csname macarg.foo\endcsname => #N
@@ -5541,10 +6944,7 @@ width0pt\relax} \fi
      \else \errmessage{Macro name \the\macname\space already defined}\fi
      \global\cslet{macsave.\the\macname}{\the\macname}%
      \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
-     % Add the macroname to \macrolist
-     \toks0 = \expandafter{\macrolist\do}%
-     \xdef\macrolist{\the\toks0
-       \expandafter\noexpand\csname\the\macname\endcsname}%
+     \addtomacrolist{\the\macname}%
   \fi
   \begingroup \macrobodyctxt
   \ifrecursive \expandafter\parsermacbody
@@ -5558,7 +6958,7 @@ width0pt\relax} \fi
     % Remove the macro name from \macrolist:
     \begingroup
       \expandafter\let\csname#1\endcsname \relax
-      \let\do\unmacrodo
+      \let\definedummyword\unmacrodo
       \xdef\macrolist{\macrolist}%
     \endgroup
   \else
@@ -5570,10 +6970,10 @@ width0pt\relax} \fi
 % macro definitions that have been changed to \relax.
 %
 \def\unmacrodo#1{%
-  \ifx#1\relax
+  \ifx #1\relax
     % remove this
   \else
-    \noexpand\do \noexpand #1%
+    \noexpand\definedummyword \noexpand#1%
   \fi
 }
 
@@ -5686,16 +7086,11 @@ width0pt\relax} \fi
 % {.  If so it reads up to the closing }, if not, it reads the whole
 % line.  Whatever was read is then fed to the next control sequence
 % as an argument (by \parsebrace or \parsearg)
-\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
+\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
 \def\braceorlinexxx{%
   \ifx\nchar\bgroup\else
     \expandafter\parsearg
-  \fi \next}
-
-% We mant to disable all macros during \shipout so that they are not
-% expanded by \write.
-\def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}%
-  \edef\next{\macrolist}\expandafter\endgroup\next}
+  \fi \macnamexxx}
 
 
 % @alias.
@@ -5706,6 +7101,7 @@ width0pt\relax} \fi
 \def\aliasyyy #1=#2\relax{%
   {%
     \expandafter\let\obeyedspace=\empty
+    \addtomacrolist{#1}%
     \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}%
   }%
   \next
@@ -5715,7 +7111,6 @@ width0pt\relax} \fi
 \message{cross references,}
 
 \newwrite\auxfile
-
 \newif\ifhavexrefs    % True if xref values are known.
 \newif\ifwarnedxrefs  % True if we warned once that they aren't known.
 
@@ -5725,15 +7120,24 @@ width0pt\relax} \fi
   node \samp{\ignorespaces#1{}}}
 
 % @node's only job in TeX is to define \lastnode, which is used in
-% cross-references.
-\parseargdef\node{\checkenv{}\nodexxx #1,\finishnodeparse}
-\def\nodexxx#1,#2\finishnodeparse{\gdef\lastnode{#1}}
+% cross-references.  The @node line might or might not have commas, and
+% might or might not have spaces before the first comma, like:
+% @node foo , bar , ...
+% We don't want such trailing spaces in the node name.
+%
+\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse}
+%
+% also remove a trailing comma, in case of something like this:
+% @node Help-Cross,  ,  , Cross-refs
+\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse}
+\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}}
+
 \let\nwnode=\node
 \let\lastnode=\empty
 
 % Write a cross-reference definition for the current node.  #1 is the
 % type (Ynumbered, Yappendix, Ynothing).
-% 
+%
 \def\donoderef#1{%
   \ifx\lastnode\empty\else
     \setref{\lastnode}{#1}%
@@ -5751,31 +7155,29 @@ width0pt\relax} \fi
 
 % \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
 % anchor), which consists of three parts:
-% 1) NAME-title - the current sectioning name taken from \thissection,
+% 1) NAME-title - the current sectioning name taken from \lastsection,
 %                 or the anchor name.
 % 2) NAME-snt   - section number and type, passed as the SNT arg, or
 %                 empty for anchors.
 % 3) NAME-pg    - the page number.
-% 
+%
 % This is called from \donoderef, \anchor, and \dofloat.  In the case of
 % floats, there is an additional part, which is not written here:
 % 4) NAME-lof   - the text as it should appear in a @listoffloats.
-% 
+%
 \def\setref#1#2{%
   \pdfmkdest{#1}%
   \iflinks
     {%
       \atdummies  % preserve commands, but don't expand them
-      \turnoffactive
-      \otherbackslash
       \edef\writexrdef##1##2{%
 	\write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
 	  ##1}{##2}}% these are parameters of \writexrdef
       }%
-      \toks0 = \expandafter{\thissection}%
+      \toks0 = \expandafter{\lastsection}%
       \immediate \writexrdef{title}{\the\toks0 }%
       \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
-      \writexrdef{pg}{\folio}% will be written later, during \shipout
+      \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, during \shipout
     }%
   \fi
 }
@@ -5819,18 +7221,25 @@ width0pt\relax} \fi
   %
   % Make link in pdf output.
   \ifpdf
-    \leavevmode
-    \getfilename{#4}%
-    {\turnoffactive \otherbackslash
+    {\indexnofonts
+     \turnoffactive
+     % This expands tokens, so do it after making catcode changes, so _
+     % etc. don't get their TeX definitions.
+     \getfilename{#4}%
+     %
+     % See comments at \activebackslashdouble.
+     {\activebackslashdouble \xdef\pdfxrefdest{#1}%
+      \backslashparens\pdfxrefdest}%
+     %
+     \leavevmode
+     \startlink attr{/Border [0 0 0]}%
      \ifnum\filenamelength>0
-       \startlink attr{/Border [0 0 0]}%
-         goto file{\the\filename.pdf} name{#1}%
+       goto file{\the\filename.pdf} name{\pdfxrefdest}%
      \else
-       \startlink attr{/Border [0 0 0]}%
-         goto name{\pdfmkpgn{#1}}%
+       goto name{\pdfmkpgn{\pdfxrefdest}}%
      \fi
     }%
-    \linkcolor
+    \setcolor{\linkcolor}%
   \fi
   %
   % Float references are printed completely differently: "Figure 1.2"
@@ -5841,7 +7250,6 @@ width0pt\relax} \fi
     % include an _ in the xref name, etc.
     \indexnofonts
     \turnoffactive
-    \otherbackslash
     \expandafter\global\expandafter\let\expandafter\Xthisreftitle
       \csname XR#1-title\endcsname
   }%
@@ -5849,19 +7257,19 @@ width0pt\relax} \fi
     % If the user specified the print name (third arg) to the ref,
     % print it instead of our usual "Figure 1.2".
     \ifdim\wd0 = 0pt
-      \refx{#1-snt}%
+      \refx{#1-snt}{}%
     \else
       \printedrefname
     \fi
     %
     % if the user also gave the printed manual name (fifth arg), append
-    % "in MANUALNAME". 
+    % "in MANUALNAME".
     \ifdim \wd1 > 0pt
       \space \putwordin{} \cite{\printedmanual}%
     \fi
   \else
     % node/anchor (non-float) references.
-    % 
+    %
     % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
     % insert empty discretionaries after hyphens, which means that it will
     % not find a line break at a hyphen in a node names.  Since some manuals
@@ -5869,14 +7277,14 @@ width0pt\relax} \fi
     % is a loss.  Therefore, we give the text of the node name again, so it
     % is as if TeX is seeing it for the first time.
     \ifdim \wd1 > 0pt
-      \putwordsection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}%
+      \putwordSection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}%
     \else
       % _ (for example) has to be the character _ for the purposes of the
       % control sequence corresponding to the node, but it has to expand
       % into the usual \leavevmode...\vrule stuff for purposes of
       % printing. So we \turnoffactive for the \refx-snt, back on for the
       % printing, back off for the \refx-pg.
-      {\turnoffactive \otherbackslash
+      {\turnoffactive
        % Only output a following space if the -snt ref is nonempty; for
        % @unnumbered and @anchor, it won't be.
        \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
@@ -5889,7 +7297,7 @@ width0pt\relax} \fi
       ,\space
       %
       % output the `page 3'.
-      \turnoffactive \otherbackslash \putwordpage\tie\refx{#1-pg}{}%
+      \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
     \fi
   \fi
   \endlink
@@ -5965,14 +7373,22 @@ width0pt\relax} \fi
 % collisions).  But if this is a float type, we have more work to do.
 %
 \def\xrdef#1#2{%
-  \expandafter\gdef\csname XR#1\endcsname{#2}% remember this xref value.
+  {% The node name might contain 8-bit characters, which in our current
+   % implementation are changed to commands like @'e.  Don't let these
+   % mess up the control sequence name.
+    \indexnofonts
+    \turnoffactive
+    \xdef\safexrefname{#1}%
+  }%
+  %
+  \expandafter\gdef\csname XR\safexrefname\endcsname{#2}% remember this xref
   %
   % Was that xref control sequence that we just defined for a float?
-  \expandafter\iffloat\csname XR#1\endcsname
+  \expandafter\iffloat\csname XR\safexrefname\endcsname
     % it was a float, and we have the (safe) float type in \iffloattype.
     \expandafter\let\expandafter\floatlist
       \csname floatlist\iffloattype\endcsname
-    % 
+    %
     % Is this the first time we've seen this float type?
     \expandafter\ifx\floatlist\relax
       \toks0 = {\do}% yes, so just \do
@@ -5983,22 +7399,23 @@ width0pt\relax} \fi
     %
     % Remember this xref in the control sequence \floatlistFLOATTYPE,
     % for later use in \listoffloats.
-    \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0{#1}}%
+    \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0
+      {\safexrefname}}%
   \fi
 }
 
 % Read the last existing aux file, if any.  No error if none exists.
-% 
+%
 \def\tryauxfile{%
   \openin 1 \jobname.aux
   \ifeof 1 \else
-    \readauxfile
+    \readdatafile{aux}%
     \global\havexrefstrue
   \fi
   \closein 1
 }
 
-\def\readauxfile{\begingroup
+\def\setupdatafile{%
   \catcode`\^^@=\other
   \catcode`\^^A=\other
   \catcode`\^^B=\other
@@ -6067,11 +7484,11 @@ width0pt\relax} \fi
   %
   % Make the characters 128-255 be printing characters.
   {%
-    \count 1=128
+    \count1=128
     \def\loop{%
-      \catcode\count 1=\other
-      \advance\count 1 by 1
-      \ifnum \count 1<256 \loop \fi
+      \catcode\count1=\other
+      \advance\count1 by 1
+      \ifnum \count1<256 \loop \fi
     }%
   }%
   %
@@ -6079,8 +7496,12 @@ width0pt\relax} \fi
   \catcode`\{=1
   \catcode`\}=2
   \catcode`\@=0
-  %
-  \input \jobname.aux
+}
+
+\def\readdatafile#1{%
+\begingroup
+  \setupdatafile
+  \input\jobname.#1
 \endgroup}
 
 
@@ -6166,7 +7587,7 @@ width0pt\relax} \fi
 % In case a @footnote appears in a vbox, save the footnote text and create
 % the real \insert just after the vbox finished.  Otherwise, the insertion
 % would be lost.
-% Similarily, if a @footnote appears inside an alignment, save the footnote
+% Similarly, if a @footnote appears inside an alignment, save the footnote
 % text to a box and make the \insert when a row of the table is finished.
 % And the same can be done for other insert classes.  --kasal, 16nov03.
 
@@ -6270,15 +7691,19 @@ width0pt\relax} \fi
   % If the image is by itself, center it.
   \ifvmode
     \imagevmodetrue
-    \nobreak\bigskip
+    \nobreak\medskip
     % Usually we'll have text after the image which will insert
     % \parskip glue, so insert it here too to equalize the space
     % above and below.
     \nobreak\vskip\parskip
     \nobreak
-    \line\bgroup\hss
   \fi
   %
+  % Leave vertical mode so that indentation from an enclosing
+  % environment such as @quotation is respected.  On the other hand, if
+  % it's at the top level, we don't want the normal paragraph indentation.
+  \noindent
+  %
   % Output the image.
   \ifpdf
     \dopdfimage{#1}{#2}{#3}%
@@ -6289,26 +7714,29 @@ width0pt\relax} \fi
     \epsfbox{#1.eps}%
   \fi
   %
-  \ifimagevmode \hss \egroup \bigbreak \fi  % space after the image
+  \ifimagevmode \medskip \fi  % space after the standalone image
 \endgroup}
 
 
-% @float FLOATTYPE,LOC ... @end float for displayed figures, tables, etc.
-% We don't actually implement floating yet, we just plop the float "here".
-% But it seemed the best name for the future.
-% 
-\envparseargdef\float{\dofloat #1,,,\finish}
+% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables,
+% etc.  We don't actually implement floating yet, we always include the
+% float "here".  But it seemed the best name for the future.
+%
+\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish}
+
+% There may be a space before second and/or third parameter; delete it.
+\def\eatcommaspace#1, {#1,}
 
 % #1 is the optional FLOATTYPE, the text label for this float, typically
 % "Figure", "Table", "Example", etc.  Can't contain commas.  If omitted,
 % this float will not be numbered and cannot be referred to.
-% 
+%
 % #2 is the optional xref label.  Also must be present for the float to
 % be referable.
-% 
+%
 % #3 is the optional positioning argument; for now, it is ignored.  It
 % will somehow specify the positions allowed to float to (here, top, bottom).
-% 
+%
 % We keep a separate counter for each FLOATTYPE, which we reset at each
 % chapter-level command.
 \let\resetallfloatnos=\empty
@@ -6318,8 +7746,15 @@ width0pt\relax} \fi
   \let\thisshortcaption=\empty
   %
   % don't lose footnotes inside @float.
+  %
+  % BEWARE: when the floats start float, we have to issue warning whenever an
+  % insert appears inside a float which could possibly float. --kasal, 26may04
+  %
   \startsavinginserts
   %
+  % We can't be used inside a paragraph.
+  \par
+  %
   \vtop\bgroup
     \def\floattype{#1}%
     \def\floatlabel{#2}%
@@ -6341,18 +7776,18 @@ width0pt\relax} \fi
     \ifx\floatlabel\empty \else
       % We want each FLOATTYPE to be numbered separately (Figure 1,
       % Table 1, Figure 2, ...).  (And if no label, no number.)
-      % 
+      %
       \expandafter\getfloatno\csname\safefloattype floatno\endcsname
       \global\advance\floatno by 1
       %
       {%
-        % This magic value for \thissection is output by \setref as the
+        % This magic value for \lastsection is output by \setref as the
         % XREFLABEL-title value.  \xrefX uses it to distinguish float
         % labels (which have a completely different output format) from
         % node and anchor labels.  And \xrdef uses it to construct the
         % lists of floats.
-        % 
-        \edef\thissection{\floatmagic=\safefloattype}%
+        %
+        \edef\lastsection{\floatmagic=\safefloattype}%
         \setref{\floatlabel}{Yfloat}%
       }%
     \fi
@@ -6399,7 +7834,7 @@ width0pt\relax} \fi
       \fi
       %
       % caption text.
-      \appendtomacro\captionline\thiscaption
+      \appendtomacro\captionline{\scanexp\thiscaption}%
     \fi
     %
     % If we have anything to print, print it, with space before.
@@ -6407,6 +7842,9 @@ width0pt\relax} \fi
     \ifx\captionline\empty \else
       \vskip.5\parskip
       \captionline
+      %
+      % Space below caption.
+      \vskip\parskip
     \fi
     %
     % If have an xref label, write the list of floats info.  Do this
@@ -6416,38 +7854,47 @@ width0pt\relax} \fi
       % \floatlabel-lof.  Besides \floatident, we include the short
       % caption if specified, else the full caption if specified, else nothing.
       {%
-        \atdummies \turnoffactive \otherbackslash
-        \immediate\write\auxfile{@xrdef{\floatlabel-lof}{%
-          \floatident
-          \ifx\thisshortcaption\empty
-            \ifx\thiscaption\empty \else : \thiscaption \fi
-          \else
-            : \thisshortcaption
-          \fi
-        }}%
+        \atdummies
+        %
+        % since we read the caption text in the macro world, where ^^M
+        % is turned into a normal character, we have to scan it back, so
+        % we don't write the literal three characters "^^M" into the aux file.
+	\scanexp{%
+	  \xdef\noexpand\gtemp{%
+	    \ifx\thisshortcaption\empty
+	      \thiscaption
+	    \else
+	      \thisshortcaption
+	    \fi
+	  }%
+	}%
+        \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident
+	  \ifx\gtemp\empty \else : \gtemp \fi}}%
       }%
     \fi
-    %
-    % Space below caption, if we printed anything.
-    \ifx\printedsomething\empty \else \vskip\parskip \fi
   \egroup  % end of \vtop
+  %
+  % place the captured inserts
+  %
+  % BEWARE: when the floats start floating, we have to issue warning
+  % whenever an insert appears inside a float which could possibly
+  % float. --kasal, 26may04
+  %
   \checkinserts
 }
 
 % Append the tokens #2 to the definition of macro #1, not expanding either.
-% 
-\newtoks\appendtomacroAtoks
-\newtoks\appendtomacroBtoks
+%
 \def\appendtomacro#1#2{%
-  \appendtomacroAtoks = \expandafter{#1}%
-  \appendtomacroBtoks = {#2}%
-  \edef#1{\the\appendtomacroAtoks \the\appendtomacroBtoks}%
+  \expandafter\def\expandafter#1\expandafter{#1#2}%
 }
 
-% @caption, @shortcaption are easy.
-% 
-\long\def\caption#1{\checkenv\float \def\thiscaption{#1}}
-\def\shortcaption#1{\checkenv\float \def\thisshortcaption{#1}}
+% @caption, @shortcaption
+%
+\def\caption{\docaption\thiscaption}
+\def\shortcaption{\docaption\thisshortcaption}
+\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption}
+\def\defcaption#1#2{\egroup \def#1{#2}}
 
 % The parameter is the control sequence identifying the counter we are
 % going to use.  Create it if it doesn't exist and assign it to \floatno.
@@ -6466,7 +7913,7 @@ width0pt\relax} \fi
 % \setref calls this to get the XREFLABEL-snt value.  We want an @xref
 % to the FLOATLABEL to expand to "Figure 3.1".  We call \setref when we
 % first read the @float command.
-% 
+%
 \def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}%
 
 % Magic string used for the XREFLABEL-title value, so \xrefX can
@@ -6475,13 +7922,13 @@ width0pt\relax} \fi
 
 % #1 is the control sequence we are passed; we expand into a conditional
 % which is true if #1 represents a float ref.  That is, the magic
-% \thissection value which we \setref above.
-% 
+% \lastsection value which we \setref above.
+%
 \def\iffloat#1{\expandafter\doiffloat#1==\finish}
 %
 % #1 is (maybe) the \floatmagic string.  If so, #2 will be the
 % (safe) float type for this float.  We set \iffloattype to #2.
-% 
+%
 \def\doiffloat#1=#2=#3\finish{%
   \def\temp{#1}%
   \def\iffloattype{#2}%
@@ -6489,7 +7936,7 @@ width0pt\relax} \fi
 }
 
 % @listoffloats FLOATTYPE - print a list of floats like a table of contents.
-% 
+%
 \parseargdef\listoffloats{%
   \def\floattype{#1}% floattype
   {%
@@ -6519,10 +7966,10 @@ width0pt\relax} \fi
 % xref label, in the form LABEL-title, which is how we save it in the
 % aux file.  We strip off the -title and look up \XRLABEL-lof, which
 % has the text we're supposed to typeset here.
-% 
+%
 % Figures without xref labels will not be included in the list (since
 % they won't appear in the aux file).
-% 
+%
 \def\listoffloatsdo#1{\listoffloatsdoentry#1\finish}
 \def\listoffloatsdoentry#1-title\finish{{%
   % Can't fully expand XR#1-lof because it can contain anything.  Just
@@ -6536,39 +7983,909 @@ width0pt\relax} \fi
   \writeentry
 }}
 
+
 \message{localization,}
-% and i18n.
 
-% @documentlanguage is usually given very early, just after
-% @setfilename.  If done too late, it may not override everything
-% properly.  Single argument is the language abbreviation.
-% It would be nice if we could set up a hyphenation file here.
+% For single-language documents, @documentlanguage is usually given very
+% early, just after @documentencoding.  Single argument is the language
+% (de) or locale (de_DE) abbreviation.
 %
-\parseargdef\documentlanguage{%
+{
+  \catcode`\_ = \active
+  \globaldefs=1
+\parseargdef\documentlanguage{\begingroup
+  \let_=\normalunderscore  % normal _ character for filenames
   \tex % read txi-??.tex file in plain TeX.
-    % Read the file if it exists.
+    % Read the file by the name they passed if it exists.
     \openin 1 txi-#1.tex
     \ifeof 1
-      \errhelp = \nolanghelp
-      \errmessage{Cannot read language file txi-#1.tex}%
+      \documentlanguagetrywithoutunderscore{#1_\finish}%
     \else
+      \globaldefs = 1  % everything in the txi-LL files needs to persist
       \input txi-#1.tex
     \fi
     \closein 1
-  \endgroup
+  \endgroup % end raw TeX
+\endgroup}
+%
+% If they passed de_DE, and txi-de_DE.tex doesn't exist,
+% try txi-de.tex.
+%
+\gdef\documentlanguagetrywithoutunderscore#1_#2\finish{%
+  \openin 1 txi-#1.tex
+  \ifeof 1
+    \errhelp = \nolanghelp
+    \errmessage{Cannot read language file txi-#1.tex}%
+  \else
+    \globaldefs = 1  % everything in the txi-LL files needs to persist
+    \input txi-#1.tex
+  \fi
+  \closein 1
 }
+}% end of special _ catcode
+%
 \newhelp\nolanghelp{The given language definition file cannot be found or
-is empty.  Maybe you need to install it?  In the current directory
-should work if nowhere else does.}
+is empty.  Maybe you need to install it?  Putting it in the current
+directory should work if nowhere else does.}
 
+% This macro is called from txi-??.tex files; the first argument is the
+% \language name to set (without the "\lang@" prefix), the second and
+% third args are \{left,right}hyphenmin.
+%
+% The language names to pass are determined when the format is built.
+% See the etex.log file created at that time, e.g.,
+% /usr/local/texlive/2008/texmf-var/web2c/pdftex/etex.log.
+%
+% With TeX Live 2008, etex now includes hyphenation patterns for all
+% available languages.  This means we can support hyphenation in
+% Texinfo, at least to some extent.  (This still doesn't solve the
+% accented characters problem.)
+%
+\catcode`@=11
+\def\txisetlanguage#1#2#3{%
+  % do not set the language if the name is undefined in the current TeX.
+  \expandafter\ifx\csname lang@#1\endcsname \relax
+    \message{no patterns for #1}%
+  \else
+    \global\language = \csname lang@#1\endcsname
+  \fi
+  % but there is no harm in adjusting the hyphenmin values regardless.
+  \global\lefthyphenmin = #2\relax
+  \global\righthyphenmin = #3\relax
+}
 
-% @documentencoding should change something in TeX eventually, most
-% likely, but for now just recognize it.
-\let\documentencoding = \comment
+% Helpers for encodings.
+% Set the catcode of characters 128 through 255 to the specified number.
+%
+\def\setnonasciicharscatcode#1{%
+   \count255=128
+   \loop\ifnum\count255<256
+      \global\catcode\count255=#1\relax
+      \advance\count255 by 1
+   \repeat
+}
 
+\def\setnonasciicharscatcodenonglobal#1{%
+   \count255=128
+   \loop\ifnum\count255<256
+      \catcode\count255=#1\relax
+      \advance\count255 by 1
+   \repeat
+}
 
-% Page size parameters.
+% @documentencoding sets the definition of non-ASCII characters
+% according to the specified encoding.
 %
+\parseargdef\documentencoding{%
+  % Encoding being declared for the document.
+  \def\declaredencoding{\csname #1.enc\endcsname}%
+  %
+  % Supported encodings: names converted to tokens in order to be able
+  % to compare them with \ifx.
+  \def\ascii{\csname US-ASCII.enc\endcsname}%
+  \def\latnine{\csname ISO-8859-15.enc\endcsname}%
+  \def\latone{\csname ISO-8859-1.enc\endcsname}%
+  \def\lattwo{\csname ISO-8859-2.enc\endcsname}%
+  \def\utfeight{\csname UTF-8.enc\endcsname}%
+  %
+  \ifx \declaredencoding \ascii
+     \asciichardefs
+  %
+  \else \ifx \declaredencoding \lattwo
+     \setnonasciicharscatcode\active
+     \lattwochardefs
+  %
+  \else \ifx \declaredencoding \latone
+     \setnonasciicharscatcode\active
+     \latonechardefs
+  %
+  \else \ifx \declaredencoding \latnine
+     \setnonasciicharscatcode\active
+     \latninechardefs
+  %
+  \else \ifx \declaredencoding \utfeight
+     \setnonasciicharscatcode\active
+     \utfeightchardefs
+  %
+  \else
+    \message{Unknown document encoding #1, ignoring.}%
+  %
+  \fi % utfeight
+  \fi % latnine
+  \fi % latone
+  \fi % lattwo
+  \fi % ascii
+}
+
+% A message to be logged when using a character that isn't available
+% the default font encoding (OT1).
+%
+\def\missingcharmsg#1{\message{Character missing in OT1 encoding: #1.}}
+
+% Take account of \c (plain) vs. \, (Texinfo) difference.
+\def\cedilla#1{\ifx\c\ptexc\c{#1}\else\,{#1}\fi}
+
+% First, make active non-ASCII characters in order for them to be
+% correctly categorized when TeX reads the replacement text of
+% macros containing the character definitions.
+\setnonasciicharscatcode\active
+%
+% Latin1 (ISO-8859-1) character definitions.
+\def\latonechardefs{%
+  \gdef^^a0{~}
+  \gdef^^a1{\exclamdown}
+  \gdef^^a2{\missingcharmsg{CENT SIGN}}
+  \gdef^^a3{{\pounds}}
+  \gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
+  \gdef^^a5{\missingcharmsg{YEN SIGN}}
+  \gdef^^a6{\missingcharmsg{BROKEN BAR}}
+  \gdef^^a7{\S}
+  \gdef^^a8{\"{}}
+  \gdef^^a9{\copyright}
+  \gdef^^aa{\ordf}
+  \gdef^^ab{\guillemetleft}
+  \gdef^^ac{$\lnot$}
+  \gdef^^ad{\-}
+  \gdef^^ae{\registeredsymbol}
+  \gdef^^af{\={}}
+  %
+  \gdef^^b0{\textdegree}
+  \gdef^^b1{$\pm$}
+  \gdef^^b2{$^2$}
+  \gdef^^b3{$^3$}
+  \gdef^^b4{\'{}}
+  \gdef^^b5{$\mu$}
+  \gdef^^b6{\P}
+  %
+  \gdef^^b7{$^.$}
+  \gdef^^b8{\cedilla\ }
+  \gdef^^b9{$^1$}
+  \gdef^^ba{\ordm}
+  %
+  \gdef^^bb{\guilletright}
+  \gdef^^bc{$1\over4$}
+  \gdef^^bd{$1\over2$}
+  \gdef^^be{$3\over4$}
+  \gdef^^bf{\questiondown}
+  %
+  \gdef^^c0{\`A}
+  \gdef^^c1{\'A}
+  \gdef^^c2{\^A}
+  \gdef^^c3{\~A}
+  \gdef^^c4{\"A}
+  \gdef^^c5{\ringaccent A}
+  \gdef^^c6{\AE}
+  \gdef^^c7{\cedilla C}
+  \gdef^^c8{\`E}
+  \gdef^^c9{\'E}
+  \gdef^^ca{\^E}
+  \gdef^^cb{\"E}
+  \gdef^^cc{\`I}
+  \gdef^^cd{\'I}
+  \gdef^^ce{\^I}
+  \gdef^^cf{\"I}
+  %
+  \gdef^^d0{\DH}
+  \gdef^^d1{\~N}
+  \gdef^^d2{\`O}
+  \gdef^^d3{\'O}
+  \gdef^^d4{\^O}
+  \gdef^^d5{\~O}
+  \gdef^^d6{\"O}
+  \gdef^^d7{$\times$}
+  \gdef^^d8{\O}
+  \gdef^^d9{\`U}
+  \gdef^^da{\'U}
+  \gdef^^db{\^U}
+  \gdef^^dc{\"U}
+  \gdef^^dd{\'Y}
+  \gdef^^de{\TH}
+  \gdef^^df{\ss}
+  %
+  \gdef^^e0{\`a}
+  \gdef^^e1{\'a}
+  \gdef^^e2{\^a}
+  \gdef^^e3{\~a}
+  \gdef^^e4{\"a}
+  \gdef^^e5{\ringaccent a}
+  \gdef^^e6{\ae}
+  \gdef^^e7{\cedilla c}
+  \gdef^^e8{\`e}
+  \gdef^^e9{\'e}
+  \gdef^^ea{\^e}
+  \gdef^^eb{\"e}
+  \gdef^^ec{\`{\dotless i}}
+  \gdef^^ed{\'{\dotless i}}
+  \gdef^^ee{\^{\dotless i}}
+  \gdef^^ef{\"{\dotless i}}
+  %
+  \gdef^^f0{\dh}
+  \gdef^^f1{\~n}
+  \gdef^^f2{\`o}
+  \gdef^^f3{\'o}
+  \gdef^^f4{\^o}
+  \gdef^^f5{\~o}
+  \gdef^^f6{\"o}
+  \gdef^^f7{$\div$}
+  \gdef^^f8{\o}
+  \gdef^^f9{\`u}
+  \gdef^^fa{\'u}
+  \gdef^^fb{\^u}
+  \gdef^^fc{\"u}
+  \gdef^^fd{\'y}
+  \gdef^^fe{\th}
+  \gdef^^ff{\"y}
+}
+
+% Latin9 (ISO-8859-15) encoding character definitions.
+\def\latninechardefs{%
+  % Encoding is almost identical to Latin1.
+  \latonechardefs
+  %
+  \gdef^^a4{\euro}
+  \gdef^^a6{\v S}
+  \gdef^^a8{\v s}
+  \gdef^^b4{\v Z}
+  \gdef^^b8{\v z}
+  \gdef^^bc{\OE}
+  \gdef^^bd{\oe}
+  \gdef^^be{\"Y}
+}
+
+% Latin2 (ISO-8859-2) character definitions.
+\def\lattwochardefs{%
+  \gdef^^a0{~}
+  \gdef^^a1{\ogonek{A}}
+  \gdef^^a2{\u{}}
+  \gdef^^a3{\L}
+  \gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
+  \gdef^^a5{\v L}
+  \gdef^^a6{\'S}
+  \gdef^^a7{\S}
+  \gdef^^a8{\"{}}
+  \gdef^^a9{\v S}
+  \gdef^^aa{\cedilla S}
+  \gdef^^ab{\v T}
+  \gdef^^ac{\'Z}
+  \gdef^^ad{\-}
+  \gdef^^ae{\v Z}
+  \gdef^^af{\dotaccent Z}
+  %
+  \gdef^^b0{\textdegree}
+  \gdef^^b1{\ogonek{a}}
+  \gdef^^b2{\ogonek{ }}
+  \gdef^^b3{\l}
+  \gdef^^b4{\'{}}
+  \gdef^^b5{\v l}
+  \gdef^^b6{\'s}
+  \gdef^^b7{\v{}}
+  \gdef^^b8{\cedilla\ }
+  \gdef^^b9{\v s}
+  \gdef^^ba{\cedilla s}
+  \gdef^^bb{\v t}
+  \gdef^^bc{\'z}
+  \gdef^^bd{\H{}}
+  \gdef^^be{\v z}
+  \gdef^^bf{\dotaccent z}
+  %
+  \gdef^^c0{\'R}
+  \gdef^^c1{\'A}
+  \gdef^^c2{\^A}
+  \gdef^^c3{\u A}
+  \gdef^^c4{\"A}
+  \gdef^^c5{\'L}
+  \gdef^^c6{\'C}
+  \gdef^^c7{\cedilla C}
+  \gdef^^c8{\v C}
+  \gdef^^c9{\'E}
+  \gdef^^ca{\ogonek{E}}
+  \gdef^^cb{\"E}
+  \gdef^^cc{\v E}
+  \gdef^^cd{\'I}
+  \gdef^^ce{\^I}
+  \gdef^^cf{\v D}
+  %
+  \gdef^^d0{\DH}
+  \gdef^^d1{\'N}
+  \gdef^^d2{\v N}
+  \gdef^^d3{\'O}
+  \gdef^^d4{\^O}
+  \gdef^^d5{\H O}
+  \gdef^^d6{\"O}
+  \gdef^^d7{$\times$}
+  \gdef^^d8{\v R}
+  \gdef^^d9{\ringaccent U}
+  \gdef^^da{\'U}
+  \gdef^^db{\H U}
+  \gdef^^dc{\"U}
+  \gdef^^dd{\'Y}
+  \gdef^^de{\cedilla T}
+  \gdef^^df{\ss}
+  %
+  \gdef^^e0{\'r}
+  \gdef^^e1{\'a}
+  \gdef^^e2{\^a}
+  \gdef^^e3{\u a}
+  \gdef^^e4{\"a}
+  \gdef^^e5{\'l}
+  \gdef^^e6{\'c}
+  \gdef^^e7{\cedilla c}
+  \gdef^^e8{\v c}
+  \gdef^^e9{\'e}
+  \gdef^^ea{\ogonek{e}}
+  \gdef^^eb{\"e}
+  \gdef^^ec{\v e}
+  \gdef^^ed{\'\i}
+  \gdef^^ee{\^\i}
+  \gdef^^ef{\v d}
+  %
+  \gdef^^f0{\dh}
+  \gdef^^f1{\'n}
+  \gdef^^f2{\v n}
+  \gdef^^f3{\'o}
+  \gdef^^f4{\^o}
+  \gdef^^f5{\H o}
+  \gdef^^f6{\"o}
+  \gdef^^f7{$\div$}
+  \gdef^^f8{\v r}
+  \gdef^^f9{\ringaccent u}
+  \gdef^^fa{\'u}
+  \gdef^^fb{\H u}
+  \gdef^^fc{\"u}
+  \gdef^^fd{\'y}
+  \gdef^^fe{\cedilla t}
+  \gdef^^ff{\dotaccent{}}
+}
+
+% UTF-8 character definitions.
+%
+% This code to support UTF-8 is based on LaTeX's utf8.def, with some
+% changes for Texinfo conventions.  It is included here under the GPL by
+% permission from Frank Mittelbach and the LaTeX team.
+%
+\newcount\countUTFx
+\newcount\countUTFy
+\newcount\countUTFz
+
+\gdef\UTFviiiTwoOctets#1#2{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\endcsname}
+%
+\gdef\UTFviiiThreeOctets#1#2#3{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\string #3\endcsname}
+%
+\gdef\UTFviiiFourOctets#1#2#3#4{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\string #3\string #4\endcsname}
+
+\gdef\UTFviiiDefined#1{%
+  \ifx #1\relax
+    \message{\linenumber Unicode char \string #1 not defined for Texinfo}%
+  \else
+    \expandafter #1%
+  \fi
+}
+
+\begingroup
+  \catcode`\~13
+  \catcode`\"12
+
+  \def\UTFviiiLoop{%
+    \global\catcode\countUTFx\active
+    \uccode`\~\countUTFx
+    \uppercase\expandafter{\UTFviiiTmp}%
+    \advance\countUTFx by 1
+    \ifnum\countUTFx < \countUTFy
+      \expandafter\UTFviiiLoop
+    \fi}
+
+  \countUTFx = "C2
+  \countUTFy = "E0
+  \def\UTFviiiTmp{%
+    \xdef~{\noexpand\UTFviiiTwoOctets\string~}}
+  \UTFviiiLoop
+
+  \countUTFx = "E0
+  \countUTFy = "F0
+  \def\UTFviiiTmp{%
+    \xdef~{\noexpand\UTFviiiThreeOctets\string~}}
+  \UTFviiiLoop
+
+  \countUTFx = "F0
+  \countUTFy = "F4
+  \def\UTFviiiTmp{%
+    \xdef~{\noexpand\UTFviiiFourOctets\string~}}
+  \UTFviiiLoop
+\endgroup
+
+\begingroup
+  \catcode`\"=12
+  \catcode`\<=12
+  \catcode`\.=12
+  \catcode`\,=12
+  \catcode`\;=12
+  \catcode`\!=12
+  \catcode`\~=13
+
+  \gdef\DeclareUnicodeCharacter#1#2{%
+    \countUTFz = "#1\relax
+    \wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}%
+    \begingroup
+      \parseXMLCharref
+      \def\UTFviiiTwoOctets##1##2{%
+        \csname u8:##1\string ##2\endcsname}%
+      \def\UTFviiiThreeOctets##1##2##3{%
+        \csname u8:##1\string ##2\string ##3\endcsname}%
+      \def\UTFviiiFourOctets##1##2##3##4{%
+        \csname u8:##1\string ##2\string ##3\string ##4\endcsname}%
+      \expandafter\expandafter\expandafter\expandafter
+       \expandafter\expandafter\expandafter
+       \gdef\UTFviiiTmp{#2}%
+    \endgroup}
+
+  \gdef\parseXMLCharref{%
+    \ifnum\countUTFz < "A0\relax
+      \errhelp = \EMsimple
+      \errmessage{Cannot define Unicode char value < 00A0}%
+    \else\ifnum\countUTFz < "800\relax
+      \parseUTFviiiA,%
+      \parseUTFviiiB C\UTFviiiTwoOctets.,%
+    \else\ifnum\countUTFz < "10000\relax
+      \parseUTFviiiA;%
+      \parseUTFviiiA,%
+      \parseUTFviiiB E\UTFviiiThreeOctets.{,;}%
+    \else
+      \parseUTFviiiA;%
+      \parseUTFviiiA,%
+      \parseUTFviiiA!%
+      \parseUTFviiiB F\UTFviiiFourOctets.{!,;}%
+    \fi\fi\fi
+  }
+
+  \gdef\parseUTFviiiA#1{%
+    \countUTFx = \countUTFz
+    \divide\countUTFz by 64
+    \countUTFy = \countUTFz
+    \multiply\countUTFz by 64
+    \advance\countUTFx by -\countUTFz
+    \advance\countUTFx by 128
+    \uccode `#1\countUTFx
+    \countUTFz = \countUTFy}
+
+  \gdef\parseUTFviiiB#1#2#3#4{%
+    \advance\countUTFz by "#10\relax
+    \uccode `#3\countUTFz
+    \uppercase{\gdef\UTFviiiTmp{#2#3#4}}}
+\endgroup
+
+\def\utfeightchardefs{%
+  \DeclareUnicodeCharacter{00A0}{\tie}
+  \DeclareUnicodeCharacter{00A1}{\exclamdown}
+  \DeclareUnicodeCharacter{00A3}{\pounds}
+  \DeclareUnicodeCharacter{00A8}{\"{ }}
+  \DeclareUnicodeCharacter{00A9}{\copyright}
+  \DeclareUnicodeCharacter{00AA}{\ordf}
+  \DeclareUnicodeCharacter{00AB}{\guillemetleft}
+  \DeclareUnicodeCharacter{00AD}{\-}
+  \DeclareUnicodeCharacter{00AE}{\registeredsymbol}
+  \DeclareUnicodeCharacter{00AF}{\={ }}
+
+  \DeclareUnicodeCharacter{00B0}{\ringaccent{ }}
+  \DeclareUnicodeCharacter{00B4}{\'{ }}
+  \DeclareUnicodeCharacter{00B8}{\cedilla{ }}
+  \DeclareUnicodeCharacter{00BA}{\ordm}
+  \DeclareUnicodeCharacter{00BB}{\guillemetright}
+  \DeclareUnicodeCharacter{00BF}{\questiondown}
+
+  \DeclareUnicodeCharacter{00C0}{\`A}
+  \DeclareUnicodeCharacter{00C1}{\'A}
+  \DeclareUnicodeCharacter{00C2}{\^A}
+  \DeclareUnicodeCharacter{00C3}{\~A}
+  \DeclareUnicodeCharacter{00C4}{\"A}
+  \DeclareUnicodeCharacter{00C5}{\AA}
+  \DeclareUnicodeCharacter{00C6}{\AE}
+  \DeclareUnicodeCharacter{00C7}{\cedilla{C}}
+  \DeclareUnicodeCharacter{00C8}{\`E}
+  \DeclareUnicodeCharacter{00C9}{\'E}
+  \DeclareUnicodeCharacter{00CA}{\^E}
+  \DeclareUnicodeCharacter{00CB}{\"E}
+  \DeclareUnicodeCharacter{00CC}{\`I}
+  \DeclareUnicodeCharacter{00CD}{\'I}
+  \DeclareUnicodeCharacter{00CE}{\^I}
+  \DeclareUnicodeCharacter{00CF}{\"I}
+
+  \DeclareUnicodeCharacter{00D0}{\DH}
+  \DeclareUnicodeCharacter{00D1}{\~N}
+  \DeclareUnicodeCharacter{00D2}{\`O}
+  \DeclareUnicodeCharacter{00D3}{\'O}
+  \DeclareUnicodeCharacter{00D4}{\^O}
+  \DeclareUnicodeCharacter{00D5}{\~O}
+  \DeclareUnicodeCharacter{00D6}{\"O}
+  \DeclareUnicodeCharacter{00D8}{\O}
+  \DeclareUnicodeCharacter{00D9}{\`U}
+  \DeclareUnicodeCharacter{00DA}{\'U}
+  \DeclareUnicodeCharacter{00DB}{\^U}
+  \DeclareUnicodeCharacter{00DC}{\"U}
+  \DeclareUnicodeCharacter{00DD}{\'Y}
+  \DeclareUnicodeCharacter{00DE}{\TH}
+  \DeclareUnicodeCharacter{00DF}{\ss}
+
+  \DeclareUnicodeCharacter{00E0}{\`a}
+  \DeclareUnicodeCharacter{00E1}{\'a}
+  \DeclareUnicodeCharacter{00E2}{\^a}
+  \DeclareUnicodeCharacter{00E3}{\~a}
+  \DeclareUnicodeCharacter{00E4}{\"a}
+  \DeclareUnicodeCharacter{00E5}{\aa}
+  \DeclareUnicodeCharacter{00E6}{\ae}
+  \DeclareUnicodeCharacter{00E7}{\cedilla{c}}
+  \DeclareUnicodeCharacter{00E8}{\`e}
+  \DeclareUnicodeCharacter{00E9}{\'e}
+  \DeclareUnicodeCharacter{00EA}{\^e}
+  \DeclareUnicodeCharacter{00EB}{\"e}
+  \DeclareUnicodeCharacter{00EC}{\`{\dotless{i}}}
+  \DeclareUnicodeCharacter{00ED}{\'{\dotless{i}}}
+  \DeclareUnicodeCharacter{00EE}{\^{\dotless{i}}}
+  \DeclareUnicodeCharacter{00EF}{\"{\dotless{i}}}
+
+  \DeclareUnicodeCharacter{00F0}{\dh}
+  \DeclareUnicodeCharacter{00F1}{\~n}
+  \DeclareUnicodeCharacter{00F2}{\`o}
+  \DeclareUnicodeCharacter{00F3}{\'o}
+  \DeclareUnicodeCharacter{00F4}{\^o}
+  \DeclareUnicodeCharacter{00F5}{\~o}
+  \DeclareUnicodeCharacter{00F6}{\"o}
+  \DeclareUnicodeCharacter{00F8}{\o}
+  \DeclareUnicodeCharacter{00F9}{\`u}
+  \DeclareUnicodeCharacter{00FA}{\'u}
+  \DeclareUnicodeCharacter{00FB}{\^u}
+  \DeclareUnicodeCharacter{00FC}{\"u}
+  \DeclareUnicodeCharacter{00FD}{\'y}
+  \DeclareUnicodeCharacter{00FE}{\th}
+  \DeclareUnicodeCharacter{00FF}{\"y}
+
+  \DeclareUnicodeCharacter{0100}{\=A}
+  \DeclareUnicodeCharacter{0101}{\=a}
+  \DeclareUnicodeCharacter{0102}{\u{A}}
+  \DeclareUnicodeCharacter{0103}{\u{a}}
+  \DeclareUnicodeCharacter{0104}{\ogonek{A}}
+  \DeclareUnicodeCharacter{0105}{\ogonek{a}}
+  \DeclareUnicodeCharacter{0106}{\'C}
+  \DeclareUnicodeCharacter{0107}{\'c}
+  \DeclareUnicodeCharacter{0108}{\^C}
+  \DeclareUnicodeCharacter{0109}{\^c}
+  \DeclareUnicodeCharacter{0118}{\ogonek{E}}
+  \DeclareUnicodeCharacter{0119}{\ogonek{e}}
+  \DeclareUnicodeCharacter{010A}{\dotaccent{C}}
+  \DeclareUnicodeCharacter{010B}{\dotaccent{c}}
+  \DeclareUnicodeCharacter{010C}{\v{C}}
+  \DeclareUnicodeCharacter{010D}{\v{c}}
+  \DeclareUnicodeCharacter{010E}{\v{D}}
+
+  \DeclareUnicodeCharacter{0112}{\=E}
+  \DeclareUnicodeCharacter{0113}{\=e}
+  \DeclareUnicodeCharacter{0114}{\u{E}}
+  \DeclareUnicodeCharacter{0115}{\u{e}}
+  \DeclareUnicodeCharacter{0116}{\dotaccent{E}}
+  \DeclareUnicodeCharacter{0117}{\dotaccent{e}}
+  \DeclareUnicodeCharacter{011A}{\v{E}}
+  \DeclareUnicodeCharacter{011B}{\v{e}}
+  \DeclareUnicodeCharacter{011C}{\^G}
+  \DeclareUnicodeCharacter{011D}{\^g}
+  \DeclareUnicodeCharacter{011E}{\u{G}}
+  \DeclareUnicodeCharacter{011F}{\u{g}}
+
+  \DeclareUnicodeCharacter{0120}{\dotaccent{G}}
+  \DeclareUnicodeCharacter{0121}{\dotaccent{g}}
+  \DeclareUnicodeCharacter{0124}{\^H}
+  \DeclareUnicodeCharacter{0125}{\^h}
+  \DeclareUnicodeCharacter{0128}{\~I}
+  \DeclareUnicodeCharacter{0129}{\~{\dotless{i}}}
+  \DeclareUnicodeCharacter{012A}{\=I}
+  \DeclareUnicodeCharacter{012B}{\={\dotless{i}}}
+  \DeclareUnicodeCharacter{012C}{\u{I}}
+  \DeclareUnicodeCharacter{012D}{\u{\dotless{i}}}
+
+  \DeclareUnicodeCharacter{0130}{\dotaccent{I}}
+  \DeclareUnicodeCharacter{0131}{\dotless{i}}
+  \DeclareUnicodeCharacter{0132}{IJ}
+  \DeclareUnicodeCharacter{0133}{ij}
+  \DeclareUnicodeCharacter{0134}{\^J}
+  \DeclareUnicodeCharacter{0135}{\^{\dotless{j}}}
+  \DeclareUnicodeCharacter{0139}{\'L}
+  \DeclareUnicodeCharacter{013A}{\'l}
+
+  \DeclareUnicodeCharacter{0141}{\L}
+  \DeclareUnicodeCharacter{0142}{\l}
+  \DeclareUnicodeCharacter{0143}{\'N}
+  \DeclareUnicodeCharacter{0144}{\'n}
+  \DeclareUnicodeCharacter{0147}{\v{N}}
+  \DeclareUnicodeCharacter{0148}{\v{n}}
+  \DeclareUnicodeCharacter{014C}{\=O}
+  \DeclareUnicodeCharacter{014D}{\=o}
+  \DeclareUnicodeCharacter{014E}{\u{O}}
+  \DeclareUnicodeCharacter{014F}{\u{o}}
+
+  \DeclareUnicodeCharacter{0150}{\H{O}}
+  \DeclareUnicodeCharacter{0151}{\H{o}}
+  \DeclareUnicodeCharacter{0152}{\OE}
+  \DeclareUnicodeCharacter{0153}{\oe}
+  \DeclareUnicodeCharacter{0154}{\'R}
+  \DeclareUnicodeCharacter{0155}{\'r}
+  \DeclareUnicodeCharacter{0158}{\v{R}}
+  \DeclareUnicodeCharacter{0159}{\v{r}}
+  \DeclareUnicodeCharacter{015A}{\'S}
+  \DeclareUnicodeCharacter{015B}{\'s}
+  \DeclareUnicodeCharacter{015C}{\^S}
+  \DeclareUnicodeCharacter{015D}{\^s}
+  \DeclareUnicodeCharacter{015E}{\cedilla{S}}
+  \DeclareUnicodeCharacter{015F}{\cedilla{s}}
+
+  \DeclareUnicodeCharacter{0160}{\v{S}}
+  \DeclareUnicodeCharacter{0161}{\v{s}}
+  \DeclareUnicodeCharacter{0162}{\cedilla{t}}
+  \DeclareUnicodeCharacter{0163}{\cedilla{T}}
+  \DeclareUnicodeCharacter{0164}{\v{T}}
+
+  \DeclareUnicodeCharacter{0168}{\~U}
+  \DeclareUnicodeCharacter{0169}{\~u}
+  \DeclareUnicodeCharacter{016A}{\=U}
+  \DeclareUnicodeCharacter{016B}{\=u}
+  \DeclareUnicodeCharacter{016C}{\u{U}}
+  \DeclareUnicodeCharacter{016D}{\u{u}}
+  \DeclareUnicodeCharacter{016E}{\ringaccent{U}}
+  \DeclareUnicodeCharacter{016F}{\ringaccent{u}}
+
+  \DeclareUnicodeCharacter{0170}{\H{U}}
+  \DeclareUnicodeCharacter{0171}{\H{u}}
+  \DeclareUnicodeCharacter{0174}{\^W}
+  \DeclareUnicodeCharacter{0175}{\^w}
+  \DeclareUnicodeCharacter{0176}{\^Y}
+  \DeclareUnicodeCharacter{0177}{\^y}
+  \DeclareUnicodeCharacter{0178}{\"Y}
+  \DeclareUnicodeCharacter{0179}{\'Z}
+  \DeclareUnicodeCharacter{017A}{\'z}
+  \DeclareUnicodeCharacter{017B}{\dotaccent{Z}}
+  \DeclareUnicodeCharacter{017C}{\dotaccent{z}}
+  \DeclareUnicodeCharacter{017D}{\v{Z}}
+  \DeclareUnicodeCharacter{017E}{\v{z}}
+
+  \DeclareUnicodeCharacter{01C4}{D\v{Z}}
+  \DeclareUnicodeCharacter{01C5}{D\v{z}}
+  \DeclareUnicodeCharacter{01C6}{d\v{z}}
+  \DeclareUnicodeCharacter{01C7}{LJ}
+  \DeclareUnicodeCharacter{01C8}{Lj}
+  \DeclareUnicodeCharacter{01C9}{lj}
+  \DeclareUnicodeCharacter{01CA}{NJ}
+  \DeclareUnicodeCharacter{01CB}{Nj}
+  \DeclareUnicodeCharacter{01CC}{nj}
+  \DeclareUnicodeCharacter{01CD}{\v{A}}
+  \DeclareUnicodeCharacter{01CE}{\v{a}}
+  \DeclareUnicodeCharacter{01CF}{\v{I}}
+
+  \DeclareUnicodeCharacter{01D0}{\v{\dotless{i}}}
+  \DeclareUnicodeCharacter{01D1}{\v{O}}
+  \DeclareUnicodeCharacter{01D2}{\v{o}}
+  \DeclareUnicodeCharacter{01D3}{\v{U}}
+  \DeclareUnicodeCharacter{01D4}{\v{u}}
+
+  \DeclareUnicodeCharacter{01E2}{\={\AE}}
+  \DeclareUnicodeCharacter{01E3}{\={\ae}}
+  \DeclareUnicodeCharacter{01E6}{\v{G}}
+  \DeclareUnicodeCharacter{01E7}{\v{g}}
+  \DeclareUnicodeCharacter{01E8}{\v{K}}
+  \DeclareUnicodeCharacter{01E9}{\v{k}}
+
+  \DeclareUnicodeCharacter{01F0}{\v{\dotless{j}}}
+  \DeclareUnicodeCharacter{01F1}{DZ}
+  \DeclareUnicodeCharacter{01F2}{Dz}
+  \DeclareUnicodeCharacter{01F3}{dz}
+  \DeclareUnicodeCharacter{01F4}{\'G}
+  \DeclareUnicodeCharacter{01F5}{\'g}
+  \DeclareUnicodeCharacter{01F8}{\`N}
+  \DeclareUnicodeCharacter{01F9}{\`n}
+  \DeclareUnicodeCharacter{01FC}{\'{\AE}}
+  \DeclareUnicodeCharacter{01FD}{\'{\ae}}
+  \DeclareUnicodeCharacter{01FE}{\'{\O}}
+  \DeclareUnicodeCharacter{01FF}{\'{\o}}
+
+  \DeclareUnicodeCharacter{021E}{\v{H}}
+  \DeclareUnicodeCharacter{021F}{\v{h}}
+
+  \DeclareUnicodeCharacter{0226}{\dotaccent{A}}
+  \DeclareUnicodeCharacter{0227}{\dotaccent{a}}
+  \DeclareUnicodeCharacter{0228}{\cedilla{E}}
+  \DeclareUnicodeCharacter{0229}{\cedilla{e}}
+  \DeclareUnicodeCharacter{022E}{\dotaccent{O}}
+  \DeclareUnicodeCharacter{022F}{\dotaccent{o}}
+
+  \DeclareUnicodeCharacter{0232}{\=Y}
+  \DeclareUnicodeCharacter{0233}{\=y}
+  \DeclareUnicodeCharacter{0237}{\dotless{j}}
+
+  \DeclareUnicodeCharacter{02DB}{\ogonek{ }}
+
+  \DeclareUnicodeCharacter{1E02}{\dotaccent{B}}
+  \DeclareUnicodeCharacter{1E03}{\dotaccent{b}}
+  \DeclareUnicodeCharacter{1E04}{\udotaccent{B}}
+  \DeclareUnicodeCharacter{1E05}{\udotaccent{b}}
+  \DeclareUnicodeCharacter{1E06}{\ubaraccent{B}}
+  \DeclareUnicodeCharacter{1E07}{\ubaraccent{b}}
+  \DeclareUnicodeCharacter{1E0A}{\dotaccent{D}}
+  \DeclareUnicodeCharacter{1E0B}{\dotaccent{d}}
+  \DeclareUnicodeCharacter{1E0C}{\udotaccent{D}}
+  \DeclareUnicodeCharacter{1E0D}{\udotaccent{d}}
+  \DeclareUnicodeCharacter{1E0E}{\ubaraccent{D}}
+  \DeclareUnicodeCharacter{1E0F}{\ubaraccent{d}}
+
+  \DeclareUnicodeCharacter{1E1E}{\dotaccent{F}}
+  \DeclareUnicodeCharacter{1E1F}{\dotaccent{f}}
+
+  \DeclareUnicodeCharacter{1E20}{\=G}
+  \DeclareUnicodeCharacter{1E21}{\=g}
+  \DeclareUnicodeCharacter{1E22}{\dotaccent{H}}
+  \DeclareUnicodeCharacter{1E23}{\dotaccent{h}}
+  \DeclareUnicodeCharacter{1E24}{\udotaccent{H}}
+  \DeclareUnicodeCharacter{1E25}{\udotaccent{h}}
+  \DeclareUnicodeCharacter{1E26}{\"H}
+  \DeclareUnicodeCharacter{1E27}{\"h}
+
+  \DeclareUnicodeCharacter{1E30}{\'K}
+  \DeclareUnicodeCharacter{1E31}{\'k}
+  \DeclareUnicodeCharacter{1E32}{\udotaccent{K}}
+  \DeclareUnicodeCharacter{1E33}{\udotaccent{k}}
+  \DeclareUnicodeCharacter{1E34}{\ubaraccent{K}}
+  \DeclareUnicodeCharacter{1E35}{\ubaraccent{k}}
+  \DeclareUnicodeCharacter{1E36}{\udotaccent{L}}
+  \DeclareUnicodeCharacter{1E37}{\udotaccent{l}}
+  \DeclareUnicodeCharacter{1E3A}{\ubaraccent{L}}
+  \DeclareUnicodeCharacter{1E3B}{\ubaraccent{l}}
+  \DeclareUnicodeCharacter{1E3E}{\'M}
+  \DeclareUnicodeCharacter{1E3F}{\'m}
+
+  \DeclareUnicodeCharacter{1E40}{\dotaccent{M}}
+  \DeclareUnicodeCharacter{1E41}{\dotaccent{m}}
+  \DeclareUnicodeCharacter{1E42}{\udotaccent{M}}
+  \DeclareUnicodeCharacter{1E43}{\udotaccent{m}}
+  \DeclareUnicodeCharacter{1E44}{\dotaccent{N}}
+  \DeclareUnicodeCharacter{1E45}{\dotaccent{n}}
+  \DeclareUnicodeCharacter{1E46}{\udotaccent{N}}
+  \DeclareUnicodeCharacter{1E47}{\udotaccent{n}}
+  \DeclareUnicodeCharacter{1E48}{\ubaraccent{N}}
+  \DeclareUnicodeCharacter{1E49}{\ubaraccent{n}}
+
+  \DeclareUnicodeCharacter{1E54}{\'P}
+  \DeclareUnicodeCharacter{1E55}{\'p}
+  \DeclareUnicodeCharacter{1E56}{\dotaccent{P}}
+  \DeclareUnicodeCharacter{1E57}{\dotaccent{p}}
+  \DeclareUnicodeCharacter{1E58}{\dotaccent{R}}
+  \DeclareUnicodeCharacter{1E59}{\dotaccent{r}}
+  \DeclareUnicodeCharacter{1E5A}{\udotaccent{R}}
+  \DeclareUnicodeCharacter{1E5B}{\udotaccent{r}}
+  \DeclareUnicodeCharacter{1E5E}{\ubaraccent{R}}
+  \DeclareUnicodeCharacter{1E5F}{\ubaraccent{r}}
+
+  \DeclareUnicodeCharacter{1E60}{\dotaccent{S}}
+  \DeclareUnicodeCharacter{1E61}{\dotaccent{s}}
+  \DeclareUnicodeCharacter{1E62}{\udotaccent{S}}
+  \DeclareUnicodeCharacter{1E63}{\udotaccent{s}}
+  \DeclareUnicodeCharacter{1E6A}{\dotaccent{T}}
+  \DeclareUnicodeCharacter{1E6B}{\dotaccent{t}}
+  \DeclareUnicodeCharacter{1E6C}{\udotaccent{T}}
+  \DeclareUnicodeCharacter{1E6D}{\udotaccent{t}}
+  \DeclareUnicodeCharacter{1E6E}{\ubaraccent{T}}
+  \DeclareUnicodeCharacter{1E6F}{\ubaraccent{t}}
+
+  \DeclareUnicodeCharacter{1E7C}{\~V}
+  \DeclareUnicodeCharacter{1E7D}{\~v}
+  \DeclareUnicodeCharacter{1E7E}{\udotaccent{V}}
+  \DeclareUnicodeCharacter{1E7F}{\udotaccent{v}}
+
+  \DeclareUnicodeCharacter{1E80}{\`W}
+  \DeclareUnicodeCharacter{1E81}{\`w}
+  \DeclareUnicodeCharacter{1E82}{\'W}
+  \DeclareUnicodeCharacter{1E83}{\'w}
+  \DeclareUnicodeCharacter{1E84}{\"W}
+  \DeclareUnicodeCharacter{1E85}{\"w}
+  \DeclareUnicodeCharacter{1E86}{\dotaccent{W}}
+  \DeclareUnicodeCharacter{1E87}{\dotaccent{w}}
+  \DeclareUnicodeCharacter{1E88}{\udotaccent{W}}
+  \DeclareUnicodeCharacter{1E89}{\udotaccent{w}}
+  \DeclareUnicodeCharacter{1E8A}{\dotaccent{X}}
+  \DeclareUnicodeCharacter{1E8B}{\dotaccent{x}}
+  \DeclareUnicodeCharacter{1E8C}{\"X}
+  \DeclareUnicodeCharacter{1E8D}{\"x}
+  \DeclareUnicodeCharacter{1E8E}{\dotaccent{Y}}
+  \DeclareUnicodeCharacter{1E8F}{\dotaccent{y}}
+
+  \DeclareUnicodeCharacter{1E90}{\^Z}
+  \DeclareUnicodeCharacter{1E91}{\^z}
+  \DeclareUnicodeCharacter{1E92}{\udotaccent{Z}}
+  \DeclareUnicodeCharacter{1E93}{\udotaccent{z}}
+  \DeclareUnicodeCharacter{1E94}{\ubaraccent{Z}}
+  \DeclareUnicodeCharacter{1E95}{\ubaraccent{z}}
+  \DeclareUnicodeCharacter{1E96}{\ubaraccent{h}}
+  \DeclareUnicodeCharacter{1E97}{\"t}
+  \DeclareUnicodeCharacter{1E98}{\ringaccent{w}}
+  \DeclareUnicodeCharacter{1E99}{\ringaccent{y}}
+
+  \DeclareUnicodeCharacter{1EA0}{\udotaccent{A}}
+  \DeclareUnicodeCharacter{1EA1}{\udotaccent{a}}
+
+  \DeclareUnicodeCharacter{1EB8}{\udotaccent{E}}
+  \DeclareUnicodeCharacter{1EB9}{\udotaccent{e}}
+  \DeclareUnicodeCharacter{1EBC}{\~E}
+  \DeclareUnicodeCharacter{1EBD}{\~e}
+
+  \DeclareUnicodeCharacter{1ECA}{\udotaccent{I}}
+  \DeclareUnicodeCharacter{1ECB}{\udotaccent{i}}
+  \DeclareUnicodeCharacter{1ECC}{\udotaccent{O}}
+  \DeclareUnicodeCharacter{1ECD}{\udotaccent{o}}
+
+  \DeclareUnicodeCharacter{1EE4}{\udotaccent{U}}
+  \DeclareUnicodeCharacter{1EE5}{\udotaccent{u}}
+
+  \DeclareUnicodeCharacter{1EF2}{\`Y}
+  \DeclareUnicodeCharacter{1EF3}{\`y}
+  \DeclareUnicodeCharacter{1EF4}{\udotaccent{Y}}
+
+  \DeclareUnicodeCharacter{1EF8}{\~Y}
+  \DeclareUnicodeCharacter{1EF9}{\~y}
+
+  \DeclareUnicodeCharacter{2013}{--}
+  \DeclareUnicodeCharacter{2014}{---}
+  \DeclareUnicodeCharacter{2018}{\quoteleft}
+  \DeclareUnicodeCharacter{2019}{\quoteright}
+  \DeclareUnicodeCharacter{201A}{\quotesinglbase}
+  \DeclareUnicodeCharacter{201C}{\quotedblleft}
+  \DeclareUnicodeCharacter{201D}{\quotedblright}
+  \DeclareUnicodeCharacter{201E}{\quotedblbase}
+  \DeclareUnicodeCharacter{2022}{\bullet}
+  \DeclareUnicodeCharacter{2026}{\dots}
+  \DeclareUnicodeCharacter{2039}{\guilsinglleft}
+  \DeclareUnicodeCharacter{203A}{\guilsinglright}
+  \DeclareUnicodeCharacter{20AC}{\euro}
+
+  \DeclareUnicodeCharacter{2192}{\expansion}
+  \DeclareUnicodeCharacter{21D2}{\result}
+
+  \DeclareUnicodeCharacter{2212}{\minus}
+  \DeclareUnicodeCharacter{2217}{\point}
+  \DeclareUnicodeCharacter{2261}{\equiv}
+}% end of \utfeightchardefs
+
+
+% US-ASCII character definitions.
+\def\asciichardefs{% nothing need be done
+   \relax
+}
+
+% Make non-ASCII characters printable again for compatibility with
+% existing Texinfo documents that may use them, even without declaring a
+% document encoding.
+%
+\setnonasciicharscatcode \other
+
+
+\message{formatting,}
+
 \newdimen\defaultparindent \defaultparindent = 15pt
 
 \chapheadingskip = 15pt plus 4pt minus 2pt
@@ -6581,7 +8898,7 @@ should work if nowhere else does.}
 % Don't be so finicky about underfull hboxes, either.
 \hbadness = 2000
 
-% Following George Bush, just get rid of widows and orphans.
+% Following George Bush, get rid of widows and orphans.
 \widowpenalty=10000
 \clubpenalty=10000
 
@@ -6599,9 +8916,9 @@ should work if nowhere else does.}
   \fi
 }
 
-% Parameters in order: 1) textheight; 2) textwidth; 3) voffset;
-% 4) hoffset; 5) binding offset; 6) topskip; 7) physical page height; 8)
-% physical page width.
+% Parameters in order: 1) textheight; 2) textwidth;
+% 3) voffset; 4) hoffset; 5) binding offset; 6) topskip;
+% 7) physical page height; 8) physical page width.
 %
 % We also call \setleading{\textleading}, so the caller should define
 % \textleading.  The caller should also set \parskip.
@@ -6628,6 +8945,10 @@ should work if nowhere else does.}
   \ifpdf
     \pdfpageheight #7\relax
     \pdfpagewidth #8\relax
+    % if we don't reset these, they will remain at "1 true in" of
+    % whatever layout pdftex was dumped with.
+    \pdfhorigin = 1 true in
+    \pdfvorigin = 1 true in
   \fi
   %
   \setleading{\textleading}
@@ -6642,19 +8963,19 @@ should work if nowhere else does.}
   \textleading = 13.2pt
   %
   % If page is nothing but text, make it come out even.
-  \internalpagesizes{46\baselineskip}{6in}%
+  \internalpagesizes{607.2pt}{6in}% that's 46 lines
                     {\voffset}{.25in}%
                     {\bindingoffset}{36pt}%
                     {11in}{8.5in}%
 }}
 
-% Use @smallbook to reset parameters for 7x9.5 (or so) format.
+% Use @smallbook to reset parameters for 7x9.25 trim size.
 \def\smallbook{{\globaldefs = 1
   \parskip = 2pt plus 1pt
   \textleading = 12pt
   %
   \internalpagesizes{7.5in}{5in}%
-                    {\voffset}{.25in}%
+                    {-.2in}{0in}%
                     {\bindingoffset}{16pt}%
                     {9.25in}{7in}%
   %
@@ -6665,6 +8986,24 @@ should work if nowhere else does.}
   \defbodyindent = .5cm
 }}
 
+% Use @smallerbook to reset parameters for 6x9 trim size.
+% (Just testing, parameters still in flux.)
+\def\smallerbook{{\globaldefs = 1
+  \parskip = 1.5pt plus 1pt
+  \textleading = 12pt
+  %
+  \internalpagesizes{7.4in}{4.8in}%
+                    {-.2in}{-.4in}%
+                    {0pt}{14pt}%
+                    {9in}{6in}%
+  %
+  \lispnarrowing = 0.25in
+  \tolerance = 700
+  \hfuzz = 1pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = .4cm
+}}
+
 % Use @afourpaper to print on European A4 paper.
 \def\afourpaper{{\globaldefs = 1
   \parskip = 3pt plus 2pt minus 1pt
@@ -6680,7 +9019,7 @@ should work if nowhere else does.}
   % \global\normaloffset = -6mm
   % \global\bindingoffset = 10mm
   % @end tex
-  \internalpagesizes{51\baselineskip}{160mm}
+  \internalpagesizes{673.2pt}{160mm}% that's 51 lines
                     {\voffset}{\hoffset}%
                     {\bindingoffset}{44pt}%
                     {297mm}{210mm}%
@@ -6745,7 +9084,7 @@ should work if nowhere else does.}
   \parskip = 3pt plus 2pt minus 1pt
   \setleading{\textleading}%
   %
-  \dimen0 = #1
+  \dimen0 = #1\relax
   \advance\dimen0 by \voffset
   %
   \dimen2 = \hsize
@@ -6764,6 +9103,9 @@ should work if nowhere else does.}
 
 \message{and turning on texinfo input format.}
 
+% DEL is a comment character, in case @c does not suffice.
+\catcode`\^^? = 14
+
 % Define macros to output various characters with catcode for normal text.
 \catcode`\"=\other
 \catcode`\~=\other
@@ -6817,6 +9159,7 @@ should work if nowhere else does.}
 
 \catcode`\_=\active
 \def_{\ifusingtt\normalunderscore\_}
+\let\realunder=_
 % Subroutine for the previous macro.
 \def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }
 
@@ -6839,6 +9182,13 @@ should work if nowhere else does.}
 % \otherifyactive is called near the end of this file.
 \def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
 
+% Used sometimes to turn off (effectively) the active characters even after
+% parsing them.
+\def\turnoffactive{%
+  \normalturnoffactive
+  \otherbackslash
+}
+
 \catcode`\@=0
 
 % \backslashcurfont outputs one backslash character in current font,
@@ -6846,27 +9196,29 @@ should work if nowhere else does.}
 \global\chardef\backslashcurfont=`\\
 \global\let\rawbackslashxx=\backslashcurfont  % let existing .??s files work
 
+% \realbackslash is an actual character `\' with catcode other, and
+% \doublebackslash is two of them (for the pdf outlines).
+{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}}
+
+% In texinfo, backslash is an active character; it prints the backslash
+% in fixed width font.
+\catcode`\\=\active
+@def@normalbackslash{{@tt@backslashcurfont}}
+% On startup, @fixbackslash assigns:
+%  @let \ = @normalbackslash
+
 % \rawbackslash defines an active \ to do \backslashcurfont.
 % \otherbackslash defines an active \ to be a literal `\' character with
 % catcode other.
-{\catcode`\\=\active
- @gdef@rawbackslash{@let\=@backslashcurfont}
- @gdef@otherbackslash{@let\=@realbackslash}
-}
-
-% \realbackslash is an actual character `\' with catcode other.
-{\catcode`\\=\other @gdef@realbackslash{\}}
-
-% \normalbackslash outputs one backslash in fixed width font.
-\def\normalbackslash{{\tt\backslashcurfont}}
+@gdef@rawbackslash{@let\=@backslashcurfont}
+@gdef@otherbackslash{@let\=@realbackslash}
 
-\catcode`\\=\active
-
-% Used sometimes to turn off (effectively) the active characters
-% even after parsing them.
-@def@turnoffactive{%
+% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
+% the literal character `\'.
+%
+@def@normalturnoffactive{%
+  @let\=@normalbackslash
   @let"=@normaldoublequote
-  @let\=@realbackslash
   @let~=@normaltilde
   @let^=@normalcaret
   @let_=@normalunderscore
@@ -6875,15 +9227,11 @@ should work if nowhere else does.}
   @let>=@normalgreater
   @let+=@normalplus
   @let$=@normaldollar %$ font-lock fix
+  @markupsetuplqdefault
+  @markupsetuprqdefault
   @unsepspaces
 }
 
-% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
-% the literal character `\'.  (Thus, \ is not expandable when this is in
-% effect.)
-%
-@def@normalturnoffactive{@turnoffactive @let\=@normalbackslash}
-
 % Make _ and + \other characters, temporarily.
 % This is canceled by @fixbackslash.
 @otherifyactive
@@ -6896,9 +9244,9 @@ should work if nowhere else does.}
 @global@let\ = @eatinput
 
 % On the other hand, perhaps the file did not have a `\input texinfo'. Then
-% the first `\{ in the file would cause an error. This macro tries to fix
+% the first `\' in the file would cause an error. This macro tries to fix
 % that, assuming it is called before the first `\' could plausibly occur.
-% Also back turn on active characters that might appear in the input
+% Also turn back on active characters that might appear in the input
 % file name, in case not using a pre-dumped format.
 %
 @gdef@fixbackslash{%
@@ -6915,9 +9263,21 @@ should work if nowhere else does.}
 @catcode`@# = @other
 @catcode`@% = @other
 
+@c Finally, make ` and ' active, so that txicodequoteundirected and
+@c txicodequotebacktick work right in, e.g., @w{@code{`foo'}}.  If we
+@c don't make ` and ' active, @code will not get them as active chars.
+@c Do this last of all since we use ` in the previous @catcode assignments.
+@catcode`@'=@active
+@catcode`@`=@active
+@markupsetuplqdefault
+@markupsetuprqdefault
+
+@c Gnulib now utterly and painfully insists on no trailing whitespace.
+@c So we have to nuke it.
 
 @c Local variables:
 @c eval: (add-hook 'write-file-hooks 'time-stamp)
+@c eval: (add-hook 'write-file-hooks 'nuke-trailing-whitespace)
 @c page-delimiter: "^\\\\message"
 @c time-stamp-start: "def\\\\texinfoversion{"
 @c time-stamp-format: "%:y-%02m-%02d.%02H"