Use new debug_defines.h.

1 files changed, 19 insertions, 19 deletions

diff --git a/riscv/debug_defines.h b/riscv/debug_defines.h
index 1d3e1c0..58826f0 100644
--- a/riscv/debug_defines.h
+++ b/riscv/debug_defines.h
@@ -295,7 +295,7 @@
 *
 * Other values are reserved for future use.
  */
-#define CSR_TDATA1_TYPE_OFFSET              XLEN-4
+#define CSR_TDATA1_TYPE_OFFSET              (XLEN-4)
 #define CSR_TDATA1_TYPE_LENGTH              4
 #define CSR_TDATA1_TYPE                     (0xfULL << CSR_TDATA1_TYPE_OFFSET)
 /*
@@ -307,14 +307,14 @@
 *
 * This bit is only writable from Debug Mode.
  */
-#define CSR_TDATA1_DMODE_OFFSET             XLEN-5
+#define CSR_TDATA1_DMODE_OFFSET             (XLEN-5)
 #define CSR_TDATA1_DMODE_LENGTH             1
 #define CSR_TDATA1_DMODE                    (0x1ULL << CSR_TDATA1_DMODE_OFFSET)
 /*
 * Trigger-specific data.
  */
 #define CSR_TDATA1_DATA_OFFSET              0
-#define CSR_TDATA1_DATA_LENGTH              XLEN - 5
+#define CSR_TDATA1_DATA_LENGTH              (XLEN - 5)
 #define CSR_TDATA1_DATA                     (((1L<<XLEN - 5)-1) << CSR_TDATA1_DATA_OFFSET)
 #define CSR_TDATA2                          0x7a2
 #define CSR_TDATA2_DATA_OFFSET              0
@@ -325,10 +325,10 @@
 #define CSR_TDATA3_DATA_LENGTH              XLEN
 #define CSR_TDATA3_DATA                     (((1L<<XLEN)-1) << CSR_TDATA3_DATA_OFFSET)
 #define CSR_MCONTROL                        0x7a1
-#define CSR_MCONTROL_TYPE_OFFSET            XLEN-4
+#define CSR_MCONTROL_TYPE_OFFSET            (XLEN-4)
 #define CSR_MCONTROL_TYPE_LENGTH            4
 #define CSR_MCONTROL_TYPE                   (0xfULL << CSR_MCONTROL_TYPE_OFFSET)
-#define CSR_MCONTROL_DMODE_OFFSET           XLEN-5
+#define CSR_MCONTROL_DMODE_OFFSET           (XLEN-5)
 #define CSR_MCONTROL_DMODE_LENGTH           1
 #define CSR_MCONTROL_DMODE                  (0x1ULL << CSR_MCONTROL_DMODE_OFFSET)
 /*
@@ -339,7 +339,7 @@
 * corresponds to the maximum NAPOT range, which is $2^{63}$ bytes in
 * size.
  */
-#define CSR_MCONTROL_MASKMAX_OFFSET         XLEN-11
+#define CSR_MCONTROL_MASKMAX_OFFSET         (XLEN-11)
 #define CSR_MCONTROL_MASKMAX_LENGTH         6
 #define CSR_MCONTROL_MASKMAX                (0x3fULL << CSR_MCONTROL_MASKMAX_OFFSET)
 /*
@@ -478,10 +478,10 @@
 #define CSR_MCONTROL_LOAD_LENGTH            1
 #define CSR_MCONTROL_LOAD                   (0x1ULL << CSR_MCONTROL_LOAD_OFFSET)
 #define CSR_ICOUNT                          0x7a1
-#define CSR_ICOUNT_TYPE_OFFSET              XLEN-4
+#define CSR_ICOUNT_TYPE_OFFSET              (XLEN-4)
 #define CSR_ICOUNT_TYPE_LENGTH              4
 #define CSR_ICOUNT_TYPE                     (0xfULL << CSR_ICOUNT_TYPE_OFFSET)
-#define CSR_ICOUNT_DMODE_OFFSET             XLEN-5
+#define CSR_ICOUNT_DMODE_OFFSET             (XLEN-5)
 #define CSR_ICOUNT_DMODE_LENGTH             1
 #define CSR_ICOUNT_DMODE                    (0x1ULL << CSR_ICOUNT_DMODE_OFFSET)
 /*
@@ -1007,14 +1007,14 @@
 #define DMI_COMMAND_CONTROL                 (0xffffffU << DMI_COMMAND_CONTROL_OFFSET)
 #define DMI_ABSTRACTAUTO                    0x18
 /*
-* When a bit in this field is 1, read or write accesses the corresponding {\tt progbuf} word
+* When a bit in this field is 1, read or write accesses to the corresponding {\tt progbuf} word
 * cause the command in \Rcommand to be executed again.
  */
 #define DMI_ABSTRACTAUTO_AUTOEXECPROGBUF_OFFSET 16
 #define DMI_ABSTRACTAUTO_AUTOEXECPROGBUF_LENGTH 16
 #define DMI_ABSTRACTAUTO_AUTOEXECPROGBUF    (0xffffU << DMI_ABSTRACTAUTO_AUTOEXECPROGBUF_OFFSET)
 /*
-* When a bit in this field is 1, read or write accesses the corresponding {\tt data} word
+* When a bit in this field is 1, read or write accesses to the corresponding {\tt data} word
 * cause the command in \Rcommand to be executed again.
  */
 #define DMI_ABSTRACTAUTO_AUTOEXECDATA_OFFSET 0
@@ -1043,15 +1043,15 @@
 #define DMI_AUTHDATA_DATA                   (0xffffffffU << DMI_AUTHDATA_DATA_OFFSET)
 #define DMI_SBCS                            0x38
 /*
-* When a 1 is written here, triggers a read at the address in {\tt
-* sbaddress} using the access size set by \Fsbaccess.
+* When a 1, every write to \Rsbaddresszero automatically triggers a
+* system bus read at the new address.
  */
-#define DMI_SBCS_SBSINGLEREAD_OFFSET        20
-#define DMI_SBCS_SBSINGLEREAD_LENGTH        1
-#define DMI_SBCS_SBSINGLEREAD               (0x1U << DMI_SBCS_SBSINGLEREAD_OFFSET)
+#define DMI_SBCS_SBREADONADDR_OFFSET        20
+#define DMI_SBCS_SBREADONADDR_LENGTH        1
+#define DMI_SBCS_SBREADONADDR               (0x1U << DMI_SBCS_SBREADONADDR_OFFSET)
 /*
 * Select the access size to use for system bus accesses triggered by
-* writes to the {\tt sbaddress} registers or \Rsbdatazero.
+* writes to \Rsbaddresszero or \Rsbdatazero.
 *
 * 0: 8-bit
 *
@@ -1080,9 +1080,9 @@
 * When 1, every read from \Rsbdatazero automatically triggers a
 * system bus read at the (possibly auto-incremented) address.
  */
-#define DMI_SBCS_SBAUTOREAD_OFFSET          15
-#define DMI_SBCS_SBAUTOREAD_LENGTH          1
-#define DMI_SBCS_SBAUTOREAD                 (0x1U << DMI_SBCS_SBAUTOREAD_OFFSET)
+#define DMI_SBCS_SBREADONDATA_OFFSET        15
+#define DMI_SBCS_SBREADONDATA_LENGTH        1
+#define DMI_SBCS_SBREADONDATA               (0x1U << DMI_SBCS_SBREADONDATA_OFFSET)
 /*
 * When the debug module's system bus
 * master causes a bus error, this field gets set. The bits in this