aboutsummaryrefslogtreecommitdiff
path: root/drivers/i2c/designware_i2c.c
blob: 1aae6b64bac320b778290649ec3a5409946bc12d (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
// SPDX-License-Identifier: GPL-2.0+
/*
 * (C) Copyright 2009
 * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
 */

#include <common.h>
#include <clk.h>
#include <dm.h>
#include <i2c.h>
#include <log.h>
#include <malloc.h>
#include <pci.h>
#include <reset.h>
#include <asm/io.h>
#include <linux/delay.h>
#include "designware_i2c.h"
#include <dm/device_compat.h>
#include <linux/err.h>

/*
 * This assigned unique hex value is constant and is derived from the two ASCII
 * letters 'DW' followed by a 16-bit unsigned number
 */
#define DW_I2C_COMP_TYPE	0x44570140

static int dw_i2c_enable(struct i2c_regs *i2c_base, bool enable)
{
	u32 ena = enable ? IC_ENABLE_0B : 0;
	int timeout = 100;

	do {
		writel(ena, &i2c_base->ic_enable);
		if ((readl(&i2c_base->ic_enable_status) & IC_ENABLE_0B) == ena)
			return 0;

		/*
		 * Wait 10 times the signaling period of the highest I2C
		 * transfer supported by the driver (for 400KHz this is
		 * 25us) as described in the DesignWare I2C databook.
		 */
		udelay(25);
	} while (timeout--);
	printf("timeout in %sabling I2C adapter\n", enable ? "en" : "dis");

	return -ETIMEDOUT;
}

/* High and low times in different speed modes (in ns) */
enum {
	/* SDA Hold Time */
	DEFAULT_SDA_HOLD_TIME		= 300,
};

/**
 * calc_counts() - Convert a period to a number of IC clk cycles
 *
 * @ic_clk: Input clock in Hz
 * @period_ns: Period to represent, in ns
 * Return: calculated count
 */
static uint calc_counts(uint ic_clk, uint period_ns)
{
	return DIV_ROUND_UP(ic_clk / 1000 * period_ns, NANO_TO_KILO);
}

/**
 * struct i2c_mode_info - Information about an I2C speed mode
 *
 * Each speed mode has its own characteristics. This struct holds these to aid
 * calculations in dw_i2c_calc_timing().
 *
 * @speed: Speed in Hz
 * @min_scl_lowtime_ns: Minimum value for SCL low period in ns
 * @min_scl_hightime_ns: Minimum value for SCL high period in ns
 * @def_rise_time_ns: Default rise time in ns
 * @def_fall_time_ns: Default fall time in ns
 */
struct i2c_mode_info {
	int speed;
	int min_scl_hightime_ns;
	int min_scl_lowtime_ns;
	int def_rise_time_ns;
	int def_fall_time_ns;
};

static const struct i2c_mode_info info_for_mode[] = {
	[IC_SPEED_MODE_STANDARD] = {
		I2C_SPEED_STANDARD_RATE,
		MIN_SS_SCL_HIGHTIME,
		MIN_SS_SCL_LOWTIME,
		1000,
		300,
	},
	[IC_SPEED_MODE_FAST] = {
		I2C_SPEED_FAST_RATE,
		MIN_FS_SCL_HIGHTIME,
		MIN_FS_SCL_LOWTIME,
		300,
		300,
	},
	[IC_SPEED_MODE_FAST_PLUS] = {
		I2C_SPEED_FAST_PLUS_RATE,
		MIN_FP_SCL_HIGHTIME,
		MIN_FP_SCL_LOWTIME,
		260,
		500,
	},
	[IC_SPEED_MODE_HIGH] = {
		I2C_SPEED_HIGH_RATE,
		MIN_HS_SCL_HIGHTIME,
		MIN_HS_SCL_LOWTIME,
		120,
		120,
	},
};

/**
 * dw_i2c_calc_timing() - Calculate the timings to use for a bus
 *
 * @priv: Bus private information (NULL if not using driver model)
 * @mode: Speed mode to use
 * @ic_clk: IC clock speed in Hz
 * @spk_cnt: Spike-suppression count
 * @config: Returns value to use
 * Return: 0 if OK, -EINVAL if the calculation failed due to invalid data
 */
static int dw_i2c_calc_timing(struct dw_i2c *priv, enum i2c_speed_mode mode,
			      int ic_clk, int spk_cnt,
			      struct dw_i2c_speed_config *config)
{
	int fall_cnt, rise_cnt, min_tlow_cnt, min_thigh_cnt;
	int hcnt, lcnt, period_cnt, diff, tot;
	int sda_hold_time_ns, scl_rise_time_ns, scl_fall_time_ns;
	const struct i2c_mode_info *info;

	/*
	 * Find the period, rise, fall, min tlow, and min thigh in terms of
	 * counts of the IC clock
	 */
	info = &info_for_mode[mode];
	period_cnt = ic_clk / info->speed;
	scl_rise_time_ns = priv && priv->scl_rise_time_ns ?
		 priv->scl_rise_time_ns : info->def_rise_time_ns;
	scl_fall_time_ns = priv && priv->scl_fall_time_ns ?
		 priv->scl_fall_time_ns : info->def_fall_time_ns;
	rise_cnt = calc_counts(ic_clk, scl_rise_time_ns);
	fall_cnt = calc_counts(ic_clk, scl_fall_time_ns);
	min_tlow_cnt = calc_counts(ic_clk, info->min_scl_lowtime_ns);
	min_thigh_cnt = calc_counts(ic_clk, info->min_scl_hightime_ns);

	debug("dw_i2c: mode %d, ic_clk %d, speed %d, period %d rise %d fall %d tlow %d thigh %d spk %d\n",
	      mode, ic_clk, info->speed, period_cnt, rise_cnt, fall_cnt,
	      min_tlow_cnt, min_thigh_cnt, spk_cnt);

	/*
	 * Back-solve for hcnt and lcnt according to the following equations:
	 * SCL_High_time = [(HCNT + IC_*_SPKLEN + 7) * ic_clk] + SCL_Fall_time
	 * SCL_Low_time = [(LCNT + 1) * ic_clk] - SCL_Fall_time + SCL_Rise_time
	 */
	hcnt = min_thigh_cnt - fall_cnt - 7 - spk_cnt;
	lcnt = min_tlow_cnt - rise_cnt + fall_cnt - 1;

	if (hcnt < 0 || lcnt < 0) {
		debug("dw_i2c: bad counts. hcnt = %d lcnt = %d\n", hcnt, lcnt);
		return log_msg_ret("counts", -EINVAL);
	}

	/*
	 * Now add things back up to ensure the period is hit. If it is off,
	 * split the difference and bias to lcnt for remainder
	 */
	tot = hcnt + lcnt + 7 + spk_cnt + rise_cnt + 1;

	if (tot < period_cnt) {
		diff = (period_cnt - tot) / 2;
		hcnt += diff;
		lcnt += diff;
		tot = hcnt + lcnt + 7 + spk_cnt + rise_cnt + 1;
		lcnt += period_cnt - tot;
	}

	config->scl_lcnt = lcnt;
	config->scl_hcnt = hcnt;

	/* Use internal default unless other value is specified */
	sda_hold_time_ns = priv && priv->sda_hold_time_ns ?
		 priv->sda_hold_time_ns : DEFAULT_SDA_HOLD_TIME;
	config->sda_hold = calc_counts(ic_clk, sda_hold_time_ns);

	debug("dw_i2c: hcnt = %d lcnt = %d sda hold = %d\n", hcnt, lcnt,
	      config->sda_hold);

	return 0;
}

/**
 * calc_bus_speed() - Calculate the config to use for a particular i2c speed
 *
 * @priv: Private information for the driver (NULL if not using driver model)
 * @i2c_base: Registers for the I2C controller
 * @speed: Required i2c speed in Hz
 * @bus_clk: Input clock to the I2C controller in Hz (e.g. IC_CLK)
 * @config: Returns the config to use for this speed
 * Return: 0 if OK, -ve on error
 */
static int calc_bus_speed(struct dw_i2c *priv, struct i2c_regs *regs, int speed,
			  ulong bus_clk, struct dw_i2c_speed_config *config)
{
	const struct dw_scl_sda_cfg *scl_sda_cfg = NULL;
	enum i2c_speed_mode i2c_spd;
	int spk_cnt;
	int ret;

	if (priv)
		scl_sda_cfg = priv->scl_sda_cfg;
	/* Allow high speed if there is no config, or the config allows it */
	if (speed >= I2C_SPEED_HIGH_RATE)
		i2c_spd = IC_SPEED_MODE_HIGH;
	else if (speed >= I2C_SPEED_FAST_PLUS_RATE)
		i2c_spd = IC_SPEED_MODE_FAST_PLUS;
	else if (speed >= I2C_SPEED_FAST_RATE)
		i2c_spd = IC_SPEED_MODE_FAST;
	else
		i2c_spd = IC_SPEED_MODE_STANDARD;

	/* Check is high speed possible and fall back to fast mode if not */
	if (i2c_spd == IC_SPEED_MODE_HIGH) {
		u32 comp_param1;

		comp_param1 = readl(&regs->comp_param1);
		if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK)
				!= DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH)
			i2c_spd = IC_SPEED_MODE_FAST;
	}

	/* Get the proper spike-suppression count based on target speed */
	if (!priv || !priv->has_spk_cnt)
		spk_cnt = 0;
	else if (i2c_spd >= IC_SPEED_MODE_HIGH)
		spk_cnt = readl(&regs->hs_spklen);
	else
		spk_cnt = readl(&regs->fs_spklen);
	if (scl_sda_cfg) {
		config->sda_hold = scl_sda_cfg->sda_hold;
		if (i2c_spd == IC_SPEED_MODE_STANDARD) {
			config->scl_hcnt = scl_sda_cfg->ss_hcnt;
			config->scl_lcnt = scl_sda_cfg->ss_lcnt;
		} else if (i2c_spd == IC_SPEED_MODE_HIGH) {
			config->scl_hcnt = scl_sda_cfg->hs_hcnt;
			config->scl_lcnt = scl_sda_cfg->hs_lcnt;
		} else {
			config->scl_hcnt = scl_sda_cfg->fs_hcnt;
			config->scl_lcnt = scl_sda_cfg->fs_lcnt;
		}
	} else {
		ret = dw_i2c_calc_timing(priv, i2c_spd, bus_clk, spk_cnt,
					 config);
		if (ret)
			return log_msg_ret("gen_confg", ret);
	}
	config->speed_mode = i2c_spd;

	return 0;
}

/**
 * _dw_i2c_set_bus_speed() - Set the i2c speed
 *
 * @priv: Private information for the driver (NULL if not using driver model)
 * @i2c_base: Registers for the I2C controller
 * @speed: Required i2c speed in Hz
 * @bus_clk: Input clock to the I2C controller in Hz (e.g. IC_CLK)
 * Return: 0 if OK, -ve on error
 */
static int _dw_i2c_set_bus_speed(struct dw_i2c *priv, struct i2c_regs *i2c_base,
				 unsigned int speed, unsigned int bus_clk)
{
	struct dw_i2c_speed_config config;
	unsigned int cntl;
	unsigned int ena;
	int ret;

	ret = calc_bus_speed(priv, i2c_base, speed, bus_clk, &config);
	if (ret)
		return ret;

	/* Get enable setting for restore later */
	ena = readl(&i2c_base->ic_enable) & IC_ENABLE_0B;

	/* to set speed cltr must be disabled */
	dw_i2c_enable(i2c_base, false);

	cntl = (readl(&i2c_base->ic_con) & (~IC_CON_SPD_MSK));

	switch (config.speed_mode) {
	case IC_SPEED_MODE_HIGH:
		cntl |= IC_CON_SPD_HS;
		writel(config.scl_hcnt, &i2c_base->ic_hs_scl_hcnt);
		writel(config.scl_lcnt, &i2c_base->ic_hs_scl_lcnt);
		break;
	case IC_SPEED_MODE_STANDARD:
		cntl |= IC_CON_SPD_SS;
		writel(config.scl_hcnt, &i2c_base->ic_ss_scl_hcnt);
		writel(config.scl_lcnt, &i2c_base->ic_ss_scl_lcnt);
		break;
	case IC_SPEED_MODE_FAST_PLUS:
	case IC_SPEED_MODE_FAST:
	default:
		cntl |= IC_CON_SPD_FS;
		writel(config.scl_hcnt, &i2c_base->ic_fs_scl_hcnt);
		writel(config.scl_lcnt, &i2c_base->ic_fs_scl_lcnt);
		break;
	}

	writel(cntl, &i2c_base->ic_con);

	/* Configure SDA Hold Time if required */
	if (config.sda_hold)
		writel(config.sda_hold, &i2c_base->ic_sda_hold);

	/* Restore back i2c now speed set */
	if (ena == IC_ENABLE_0B)
		dw_i2c_enable(i2c_base, true);
	if (priv)
		priv->config = config;

	return 0;
}

int dw_i2c_gen_speed_config(const struct udevice *dev, int speed_hz,
			    struct dw_i2c_speed_config *config)
{
	struct dw_i2c *priv = dev_get_priv(dev);
	ulong rate;
	int ret;

#if CONFIG_IS_ENABLED(CLK)
	rate = clk_get_rate(&priv->clk);
	if (IS_ERR_VALUE(rate))
		return log_msg_ret("clk", -EINVAL);
#else
	rate = IC_CLK;
#endif

	ret = calc_bus_speed(priv, priv->regs, speed_hz, rate, config);
	if (ret)
		printf("%s: ret=%d\n", __func__, ret);
	if (ret)
		return log_msg_ret("calc_bus_speed", ret);

	return 0;
}

/*
 * i2c_setaddress - Sets the target slave address
 * @i2c_addr:	target i2c address
 *
 * Sets the target slave address.
 */
static void i2c_setaddress(struct i2c_regs *i2c_base, unsigned int i2c_addr)
{
	/* Disable i2c */
	dw_i2c_enable(i2c_base, false);

	writel(i2c_addr, &i2c_base->ic_tar);

	/* Enable i2c */
	dw_i2c_enable(i2c_base, true);
}

/*
 * i2c_flush_rxfifo - Flushes the i2c RX FIFO
 *
 * Flushes the i2c RX FIFO
 */
static void i2c_flush_rxfifo(struct i2c_regs *i2c_base)
{
	while (readl(&i2c_base->ic_status) & IC_STATUS_RFNE)
		readl(&i2c_base->ic_cmd_data);
}

/*
 * i2c_wait_for_bb - Waits for bus busy
 *
 * Waits for bus busy
 */
static int i2c_wait_for_bb(struct i2c_regs *i2c_base)
{
	unsigned long start_time_bb = get_timer(0);

	while ((readl(&i2c_base->ic_status) & IC_STATUS_MA) ||
	       !(readl(&i2c_base->ic_status) & IC_STATUS_TFE)) {

		/* Evaluate timeout */
		if (get_timer(start_time_bb) > (unsigned long)(I2C_BYTE_TO_BB))
			return 1;
	}

	return 0;
}

static int i2c_xfer_init(struct i2c_regs *i2c_base, uchar chip, uint addr,
			 int alen)
{
	if (i2c_wait_for_bb(i2c_base))
		return 1;

	i2c_setaddress(i2c_base, chip);
	while (alen) {
		alen--;
		/* high byte address going out first */
		writel((addr >> (alen * 8)) & 0xff,
		       &i2c_base->ic_cmd_data);
	}
	return 0;
}

static int i2c_xfer_finish(struct i2c_regs *i2c_base)
{
	ulong start_stop_det = get_timer(0);

	while (1) {
		if ((readl(&i2c_base->ic_raw_intr_stat) & IC_STOP_DET)) {
			readl(&i2c_base->ic_clr_stop_det);
			break;
		} else if (get_timer(start_stop_det) > I2C_STOPDET_TO) {
			break;
		}
	}

	if (i2c_wait_for_bb(i2c_base)) {
		printf("Timed out waiting for bus\n");
		return 1;
	}

	i2c_flush_rxfifo(i2c_base);

	return 0;
}

/*
 * i2c_read - Read from i2c memory
 * @chip:	target i2c address
 * @addr:	address to read from
 * @alen:
 * @buffer:	buffer for read data
 * @len:	no of bytes to be read
 *
 * Read from i2c memory.
 */
static int __dw_i2c_read(struct i2c_regs *i2c_base, u8 dev, uint addr,
			 int alen, u8 *buffer, int len)
{
	unsigned long start_time_rx;
	unsigned int active = 0;

#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
	/*
	 * EEPROM chips that implement "address overflow" are ones
	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
	 * address and the extra bits end up in the "chip address"
	 * bit slots. This makes a 24WC08 (1Kbyte) chip look like
	 * four 256 byte chips.
	 *
	 * Note that we consider the length of the address field to
	 * still be one byte because the extra address bits are
	 * hidden in the chip address.
	 */
	dev |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
	addr &= ~(CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW << (alen * 8));

	debug("%s: fix addr_overflow: dev %02x addr %02x\n", __func__, dev,
	      addr);
#endif

	if (i2c_xfer_init(i2c_base, dev, addr, alen))
		return 1;

	start_time_rx = get_timer(0);
	while (len) {
		if (!active) {
			/*
			 * Avoid writing to ic_cmd_data multiple times
			 * in case this loop spins too quickly and the
			 * ic_status RFNE bit isn't set after the first
			 * write. Subsequent writes to ic_cmd_data can
			 * trigger spurious i2c transfer.
			 */
			if (len == 1)
				writel(IC_CMD | IC_STOP, &i2c_base->ic_cmd_data);
			else
				writel(IC_CMD, &i2c_base->ic_cmd_data);
			active = 1;
		}

		if (readl(&i2c_base->ic_status) & IC_STATUS_RFNE) {
			*buffer++ = (uchar)readl(&i2c_base->ic_cmd_data);
			len--;
			start_time_rx = get_timer(0);
			active = 0;
		} else if (get_timer(start_time_rx) > I2C_BYTE_TO) {
			return 1;
		}
	}

	return i2c_xfer_finish(i2c_base);
}

/*
 * i2c_write - Write to i2c memory
 * @chip:	target i2c address
 * @addr:	address to read from
 * @alen:
 * @buffer:	buffer for read data
 * @len:	no of bytes to be read
 *
 * Write to i2c memory.
 */
static int __dw_i2c_write(struct i2c_regs *i2c_base, u8 dev, uint addr,
			  int alen, u8 *buffer, int len)
{
	int nb = len;
	unsigned long start_time_tx;

#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
	/*
	 * EEPROM chips that implement "address overflow" are ones
	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
	 * address and the extra bits end up in the "chip address"
	 * bit slots. This makes a 24WC08 (1Kbyte) chip look like
	 * four 256 byte chips.
	 *
	 * Note that we consider the length of the address field to
	 * still be one byte because the extra address bits are
	 * hidden in the chip address.
	 */
	dev |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
	addr &= ~(CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW << (alen * 8));

	debug("%s: fix addr_overflow: dev %02x addr %02x\n", __func__, dev,
	      addr);
#endif

	if (i2c_xfer_init(i2c_base, dev, addr, alen))
		return 1;

	start_time_tx = get_timer(0);
	while (len) {
		if (readl(&i2c_base->ic_status) & IC_STATUS_TFNF) {
			if (--len == 0) {
				writel(*buffer | IC_STOP,
				       &i2c_base->ic_cmd_data);
			} else {
				writel(*buffer, &i2c_base->ic_cmd_data);
			}
			buffer++;
			start_time_tx = get_timer(0);

		} else if (get_timer(start_time_tx) > (nb * I2C_BYTE_TO)) {
				printf("Timed out. i2c write Failed\n");
				return 1;
		}
	}

	return i2c_xfer_finish(i2c_base);
}

/*
 * __dw_i2c_init - Init function
 * @speed:	required i2c speed
 * @slaveaddr:	slave address for the device
 *
 * Initialization function.
 */
static int __dw_i2c_init(struct i2c_regs *i2c_base, int speed, int slaveaddr)
{
	int ret;

	/* Disable i2c */
	ret = dw_i2c_enable(i2c_base, false);
	if (ret)
		return ret;

	writel(IC_CON_SD | IC_CON_RE | IC_CON_SPD_FS | IC_CON_MM,
	       &i2c_base->ic_con);
	writel(IC_RX_TL, &i2c_base->ic_rx_tl);
	writel(IC_TX_TL, &i2c_base->ic_tx_tl);
	writel(IC_STOP_DET, &i2c_base->ic_intr_mask);
#if !CONFIG_IS_ENABLED(DM_I2C)
	_dw_i2c_set_bus_speed(NULL, i2c_base, speed, IC_CLK);
	writel(slaveaddr, &i2c_base->ic_sar);
#endif

	/* Enable i2c */
	ret = dw_i2c_enable(i2c_base, true);
	if (ret)
		return ret;

	return 0;
}

#if !CONFIG_IS_ENABLED(DM_I2C)
/*
 * The legacy I2C functions. These need to get removed once
 * all users of this driver are converted to DM.
 */
static struct i2c_regs *i2c_get_base(struct i2c_adapter *adap)
{
	switch (adap->hwadapnr) {
#if CONFIG_SYS_I2C_BUS_MAX >= 4
	case 3:
		return (struct i2c_regs *)CONFIG_SYS_I2C_BASE3;
#endif
#if CONFIG_SYS_I2C_BUS_MAX >= 3
	case 2:
		return (struct i2c_regs *)CONFIG_SYS_I2C_BASE2;
#endif
#if CONFIG_SYS_I2C_BUS_MAX >= 2
	case 1:
		return (struct i2c_regs *)CONFIG_SYS_I2C_BASE1;
#endif
	case 0:
		return (struct i2c_regs *)CONFIG_SYS_I2C_BASE;
	default:
		printf("Wrong I2C-adapter number %d\n", adap->hwadapnr);
	}

	return NULL;
}

static unsigned int dw_i2c_set_bus_speed(struct i2c_adapter *adap,
					 unsigned int speed)
{
	adap->speed = speed;
	return _dw_i2c_set_bus_speed(NULL, i2c_get_base(adap), speed, IC_CLK);
}

static void dw_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
{
	__dw_i2c_init(i2c_get_base(adap), speed, slaveaddr);
}

static int dw_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr,
		       int alen, u8 *buffer, int len)
{
	return __dw_i2c_read(i2c_get_base(adap), dev, addr, alen, buffer, len);
}

static int dw_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr,
			int alen, u8 *buffer, int len)
{
	return __dw_i2c_write(i2c_get_base(adap), dev, addr, alen, buffer, len);
}

/* dw_i2c_probe - Probe the i2c chip */
static int dw_i2c_probe(struct i2c_adapter *adap, u8 dev)
{
	struct i2c_regs *i2c_base = i2c_get_base(adap);
	u32 tmp;
	int ret;

	/*
	 * Try to read the first location of the chip.
	 */
	ret = __dw_i2c_read(i2c_base, dev, 0, 1, (uchar *)&tmp, 1);
	if (ret)
		dw_i2c_init(adap, adap->speed, adap->slaveaddr);

	return ret;
}

U_BOOT_I2C_ADAP_COMPLETE(dw_0, dw_i2c_init, dw_i2c_probe, dw_i2c_read,
			 dw_i2c_write, dw_i2c_set_bus_speed,
			 CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 0)

#else /* CONFIG_DM_I2C */
/* The DM I2C functions */

static int designware_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
			       int nmsgs)
{
	struct dw_i2c *i2c = dev_get_priv(bus);
	int ret;

	debug("i2c_xfer: %d messages\n", nmsgs);
	for (; nmsgs > 0; nmsgs--, msg++) {
		debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
		if (msg->flags & I2C_M_RD) {
			ret = __dw_i2c_read(i2c->regs, msg->addr, 0, 0,
					    msg->buf, msg->len);
		} else {
			ret = __dw_i2c_write(i2c->regs, msg->addr, 0, 0,
					     msg->buf, msg->len);
		}
		if (ret) {
			debug("i2c_write: error sending\n");
			return -EREMOTEIO;
		}
	}

	return 0;
}

static int designware_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
{
	struct dw_i2c *i2c = dev_get_priv(bus);
	ulong rate;

#if CONFIG_IS_ENABLED(CLK)
	rate = clk_get_rate(&i2c->clk);
	if (IS_ERR_VALUE(rate))
		return log_ret(-EINVAL);
#else
	rate = IC_CLK;
#endif
	return _dw_i2c_set_bus_speed(i2c, i2c->regs, speed, rate);
}

static int designware_i2c_probe_chip(struct udevice *bus, uint chip_addr,
				     uint chip_flags)
{
	struct dw_i2c *i2c = dev_get_priv(bus);
	struct i2c_regs *i2c_base = i2c->regs;
	u32 tmp;
	int ret;

	/* Try to read the first location of the chip */
	ret = __dw_i2c_read(i2c_base, chip_addr, 0, 1, (uchar *)&tmp, 1);
	if (ret)
		__dw_i2c_init(i2c_base, 0, 0);

	return ret;
}

int designware_i2c_of_to_plat(struct udevice *bus)
{
	struct dw_i2c *priv = dev_get_priv(bus);
	int ret;

	if (!priv->regs)
		priv->regs = dev_read_addr_ptr(bus);
	dev_read_u32(bus, "i2c-scl-rising-time-ns", &priv->scl_rise_time_ns);
	dev_read_u32(bus, "i2c-scl-falling-time-ns", &priv->scl_fall_time_ns);
	dev_read_u32(bus, "i2c-sda-hold-time-ns", &priv->sda_hold_time_ns);

	ret = reset_get_bulk(bus, &priv->resets);
	if (ret) {
		if (ret != -ENOTSUPP)
			dev_warn(bus, "Can't get reset: %d\n", ret);
	} else {
		reset_deassert_bulk(&priv->resets);
	}

#if CONFIG_IS_ENABLED(CLK)
	ret = clk_get_by_index(bus, 0, &priv->clk);
	if (ret)
		return ret;

	ret = clk_enable(&priv->clk);
	if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
		clk_free(&priv->clk);
		dev_err(bus, "failed to enable clock\n");
		return ret;
	}
#endif

	return 0;
}

int designware_i2c_probe(struct udevice *bus)
{
	struct dw_i2c *priv = dev_get_priv(bus);
	uint comp_type;

	comp_type = readl(&priv->regs->comp_type);
	if (comp_type != DW_I2C_COMP_TYPE) {
		log_err("I2C bus %s has unknown type %#x\n", bus->name,
			comp_type);
		return -ENXIO;
	}

	log_debug("I2C bus %s version %#x\n", bus->name,
		  readl(&priv->regs->comp_version));

	return __dw_i2c_init(priv->regs, 0, 0);
}

int designware_i2c_remove(struct udevice *dev)
{
	struct dw_i2c *priv = dev_get_priv(dev);

#if CONFIG_IS_ENABLED(CLK)
	clk_disable(&priv->clk);
	clk_free(&priv->clk);
#endif

	return reset_release_bulk(&priv->resets);
}

const struct dm_i2c_ops designware_i2c_ops = {
	.xfer		= designware_i2c_xfer,
	.probe_chip	= designware_i2c_probe_chip,
	.set_bus_speed	= designware_i2c_set_bus_speed,
};

static const struct udevice_id designware_i2c_ids[] = {
	{ .compatible = "snps,designware-i2c" },
	{ }
};

U_BOOT_DRIVER(i2c_designware) = {
	.name	= "i2c_designware",
	.id	= UCLASS_I2C,
	.of_match = designware_i2c_ids,
	.of_to_plat = designware_i2c_of_to_plat,
	.probe	= designware_i2c_probe,
	.priv_auto	= sizeof(struct dw_i2c),
	.remove = designware_i2c_remove,
	.flags	= DM_FLAG_OS_PREPARE,
	.ops	= &designware_i2c_ops,
};

#endif /* CONFIG_DM_I2C */