1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2004 Freescale Semiconductor.
* Copyright (C) 2003 Motorola Inc.
* Xianghua Xiao (x.xiao@motorola.com)
*/
/*
* PCI Configuration space access support for MPC85xx PCI Bridge
*/
#include <common.h>
#include <asm/bitops.h>
#include <asm/cpm_85xx.h>
#include <pci.h>
#if !defined(CONFIG_FSL_PCI_INIT) && !defined(CONFIG_DM_PCI)
#ifndef CONFIG_SYS_PCI1_MEM_BUS
#define CONFIG_SYS_PCI1_MEM_BUS CONFIG_SYS_PCI1_MEM_BASE
#endif
#ifndef CONFIG_SYS_PCI1_IO_BUS
#define CONFIG_SYS_PCI1_IO_BUS CONFIG_SYS_PCI1_IO_BASE
#endif
#ifndef CONFIG_SYS_PCI2_MEM_BUS
#define CONFIG_SYS_PCI2_MEM_BUS CONFIG_SYS_PCI2_MEM_BASE
#endif
#ifndef CONFIG_SYS_PCI2_IO_BUS
#define CONFIG_SYS_PCI2_IO_BUS CONFIG_SYS_PCI2_IO_BASE
#endif
static struct pci_controller *pci_hose;
void
pci_mpc85xx_init(struct pci_controller *board_hose)
{
u16 reg16;
u32 dev;
volatile ccsr_pcix_t *pcix = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR);
#ifdef CONFIG_MPC85XX_PCI2
volatile ccsr_pcix_t *pcix2 = (void *)(CONFIG_SYS_MPC85xx_PCIX2_ADDR);
#endif
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
struct pci_controller * hose;
pci_hose = board_hose;
hose = &pci_hose[0];
hose->first_busno = 0;
hose->last_busno = 0xff;
pci_setup_indirect(hose,
(CONFIG_SYS_IMMR+0x8000),
(CONFIG_SYS_IMMR+0x8004));
/*
* Hose scan.
*/
dev = PCI_BDF(hose->first_busno, 0, 0);
pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16);
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
/*
* Clear non-reserved bits in status register.
*/
pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) {
/* PCI-X init */
if (CONFIG_SYS_CLK_FREQ < 66000000)
printf("PCI-X will only work at 66 MHz\n");
reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
pci_hose_write_config_word(hose, dev, PCIX_COMMAND, reg16);
}
pcix->potar1 = (CONFIG_SYS_PCI1_MEM_BUS >> 12) & 0x000fffff;
pcix->potear1 = 0x00000000;
pcix->powbar1 = (CONFIG_SYS_PCI1_MEM_PHYS >> 12) & 0x000fffff;
pcix->powbear1 = 0x00000000;
pcix->powar1 = (POWAR_EN | POWAR_MEM_READ |
POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI1_MEM_SIZE) - 1));
pcix->potar2 = (CONFIG_SYS_PCI1_IO_BUS >> 12) & 0x000fffff;
pcix->potear2 = 0x00000000;
pcix->powbar2 = (CONFIG_SYS_PCI1_IO_PHYS >> 12) & 0x000fffff;
pcix->powbear2 = 0x00000000;
pcix->powar2 = (POWAR_EN | POWAR_IO_READ |
POWAR_IO_WRITE | (__ilog2(CONFIG_SYS_PCI1_IO_SIZE) - 1));
pcix->pitar1 = 0x00000000;
pcix->piwbar1 = 0x00000000;
pcix->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G);
pcix->powar3 = 0;
pcix->powar4 = 0;
pcix->piwar2 = 0;
pcix->piwar3 = 0;
pci_set_region(hose->regions + 0,
CONFIG_SYS_PCI1_MEM_BUS,
CONFIG_SYS_PCI1_MEM_PHYS,
CONFIG_SYS_PCI1_MEM_SIZE,
PCI_REGION_MEM);
pci_set_region(hose->regions + 1,
CONFIG_SYS_PCI1_IO_BUS,
CONFIG_SYS_PCI1_IO_PHYS,
CONFIG_SYS_PCI1_IO_SIZE,
PCI_REGION_IO);
hose->region_count = 2;
pci_register_hose(hose);
#if defined(CONFIG_TARGET_MPC8555CDS)
/*
* This is a SW workaround for an apparent HW problem
* in the PCI controller on the MPC85555/41 CDS boards.
* The first config cycle must be to a valid, known
* device on the PCI bus in order to trick the PCI
* controller state machine into a known valid state.
* Without this, the first config cycle has the chance
* of hanging the controller permanently, just leaving
* it in a semi-working state, or leaving it working.
*
* Pick on the Tundra, Device 17, to get it right.
*/
{
u8 header_type;
pci_hose_read_config_byte(hose,
PCI_BDF(0,BRIDGE_ID,0),
PCI_HEADER_TYPE,
&header_type);
}
#endif
hose->last_busno = pci_hose_scan(hose);
#ifdef CONFIG_MPC85XX_PCI2
hose = &pci_hose[1];
hose->first_busno = pci_hose[0].last_busno + 1;
hose->last_busno = 0xff;
pci_setup_indirect(hose,
(CONFIG_SYS_IMMR+0x9000),
(CONFIG_SYS_IMMR+0x9004));
dev = PCI_BDF(hose->first_busno, 0, 0);
pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16);
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
/*
* Clear non-reserved bits in status register.
*/
pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
pcix2->potar1 = (CONFIG_SYS_PCI2_MEM_BUS >> 12) & 0x000fffff;
pcix2->potear1 = 0x00000000;
pcix2->powbar1 = (CONFIG_SYS_PCI2_MEM_PHYS >> 12) & 0x000fffff;
pcix2->powbear1 = 0x00000000;
pcix2->powar1 = (POWAR_EN | POWAR_MEM_READ |
POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI2_MEM_SIZE) - 1));
pcix2->potar2 = (CONFIG_SYS_PCI2_IO_BUS >> 12) & 0x000fffff;
pcix2->potear2 = 0x00000000;
pcix2->powbar2 = (CONFIG_SYS_PCI2_IO_PHYS >> 12) & 0x000fffff;
pcix2->powbear2 = 0x00000000;
pcix2->powar2 = (POWAR_EN | POWAR_IO_READ |
POWAR_IO_WRITE | (__ilog2(CONFIG_SYS_PCI2_IO_SIZE) - 1));
pcix2->pitar1 = 0x00000000;
pcix2->piwbar1 = 0x00000000;
pcix2->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G);
pcix2->powar3 = 0;
pcix2->powar4 = 0;
pcix2->piwar2 = 0;
pcix2->piwar3 = 0;
pci_set_region(hose->regions + 0,
CONFIG_SYS_PCI2_MEM_BUS,
CONFIG_SYS_PCI2_MEM_PHYS,
CONFIG_SYS_PCI2_MEM_SIZE,
PCI_REGION_MEM);
pci_set_region(hose->regions + 1,
CONFIG_SYS_PCI2_IO_BUS,
CONFIG_SYS_PCI2_IO_PHYS,
CONFIG_SYS_PCI2_IO_SIZE,
PCI_REGION_IO);
hose->region_count = 2;
/*
* Hose scan.
*/
pci_register_hose(hose);
hose->last_busno = pci_hose_scan(hose);
#endif
}
#endif /* !CONFIG_FSL_PCI_INIT */
|