1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
|
#include <common.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clock.h>
#include <asm/arch/prcm.h>
#ifdef CONFIG_SPL_BUILD
void clock_init_safe(void)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
clock_set_pll1(408000000);
writel(CCM_PLL6_DEFAULT, &ccm->pll6_cfg);
while (!(readl(&ccm->pll6_cfg) & CCM_PLL6_LOCK))
;
clrsetbits_le32(&ccm->cpu_axi_cfg, CCM_CPU_AXI_APB_MASK | CCM_CPU_AXI_AXI_MASK,
CCM_CPU_AXI_DEFAULT_FACTORS);
writel(CCM_PSI_AHB1_AHB2_DEFAULT, &ccm->psi_ahb1_ahb2_cfg);
writel(CCM_AHB3_DEFAULT, &ccm->ahb3_cfg);
writel(CCM_APB1_DEFAULT, &ccm->apb1_cfg);
/*
* The mux and factor are set, but the clock will be enabled in
* DRAM initialization code.
*/
writel(MBUS_CLK_SRC_PLL6X2 | MBUS_CLK_M(3), &ccm->mbus_cfg);
}
#endif
void clock_init_uart(void)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
/* uart clock source is apb2 */
writel(APB2_CLK_SRC_OSC24M|
APB2_CLK_RATE_N_1|
APB2_CLK_RATE_M(1),
&ccm->apb2_cfg);
/* open the clock for uart */
setbits_le32(&ccm->uart_gate_reset,
1 << (CONFIG_CONS_INDEX - 1));
/* deassert uart reset */
setbits_le32(&ccm->uart_gate_reset,
1 << (RESET_SHIFT + CONFIG_CONS_INDEX - 1));
}
#ifdef CONFIG_SPL_BUILD
void clock_set_pll1(unsigned int clk)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
u32 val;
/* Do not support clocks < 288MHz as they need factor P */
if (clk < 288000000) clk = 288000000;
/* Switch to 24MHz clock while changing PLL1 */
val = readl(&ccm->cpu_axi_cfg);
val &= ~CCM_CPU_AXI_MUX_MASK;
val |= CCM_CPU_AXI_MUX_OSC24M;
writel(val, &ccm->cpu_axi_cfg);
/* clk = 24*n/p, p is ignored if clock is >288MHz */
writel(CCM_PLL1_CTRL_EN | CCM_PLL1_LOCK_EN | CCM_PLL1_CLOCK_TIME_2 |
#ifdef CONFIG_MACH_SUN50I_H616
CCM_PLL1_OUT_EN |
#endif
CCM_PLL1_CTRL_N(clk / 24000000), &ccm->pll1_cfg);
while (!(readl(&ccm->pll1_cfg) & CCM_PLL1_LOCK)) {}
/* Switch CPU to PLL1 */
val = readl(&ccm->cpu_axi_cfg);
val &= ~CCM_CPU_AXI_MUX_MASK;
val |= CCM_CPU_AXI_MUX_PLL_CPUX;
writel(val, &ccm->cpu_axi_cfg);
}
#endif
unsigned int clock_get_pll6(void)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
int m = IS_ENABLED(CONFIG_MACH_SUN50I_H6) ? 4 : 2;
uint32_t rval = readl(&ccm->pll6_cfg);
int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
int div1 = ((rval & CCM_PLL6_CTRL_DIV1_MASK) >>
CCM_PLL6_CTRL_DIV1_SHIFT) + 1;
int div2 = ((rval & CCM_PLL6_CTRL_DIV2_MASK) >>
CCM_PLL6_CTRL_DIV2_SHIFT) + 1;
/* The register defines PLL6-2X or PLL6-4X, not plain PLL6 */
return 24000000 / m * n / div1 / div2;
}
int clock_twi_onoff(int port, int state)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct sunxi_prcm_reg *const prcm =
(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
u32 value, *ptr;
int shift;
value = BIT(GATE_SHIFT) | BIT (RESET_SHIFT);
if (port == 5) {
shift = 0;
ptr = &prcm->twi_gate_reset;
} else {
shift = port;
ptr = &ccm->twi_gate_reset;
}
/* set the apb clock gate and reset for twi */
if (state)
setbits_le32(ptr, value << shift);
else
clrbits_le32(ptr, value << shift);
return 0;
}
|