/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright 2013-2019 Toradex, Inc. * * Configuration settings for the Toradex Colibri iMX6 */ #ifndef __CONFIG_H #define __CONFIG_H #include #include "mx6_common.h" #include #include #ifdef CONFIG_SPL #include "imx6_spl.h" #endif #define CONFIG_MXC_UART_BASE UART1_BASE /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_SYS_FSL_USDHC_NUM 2 /* USB Configs */ /* Host */ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 /* Client */ #define CONFIG_USBD_HS /* Framebuffer and LCD */ #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP /* Command definition */ #undef CONFIG_IPADDR #define CONFIG_IPADDR 192.168.10.2 #define CONFIG_NETMASK 255.255.255.0 #undef CONFIG_SERVERIP #define CONFIG_SERVERIP 192.168.10.1 #ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 1) \ func(MMC, mmc, 0) \ func(USB, usb, 0) \ func(DHCP, dhcp, na) #include #undef BOOTENV_RUN_NET_USB_START #define BOOTENV_RUN_NET_USB_START "" #else /* CONFIG_SPL_BUILD */ #define BOOTENV #endif /* CONFIG_SPL_BUILD */ #define UBOOT_UPDATE \ "uboot_hwpart=1\0" \ "uboot_blk=8a\0" \ "uboot_spl_blk=2\0" \ "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \ "setexpr blkcnt ${blkcnt} / 0x200\0" \ "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \ "update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ "mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0" #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ "fdt_addr_r=0x12100000\0" \ "kernel_addr_r=0x11000000\0" \ "pxefile_addr_r=0x17100000\0" \ "ramdisk_addr_r=0x12200000\0" \ "scriptaddr=0x17000000\0" #define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \ "boot_file=zImage\0" \ "boot_script_dhcp=boot.scr\0" \ "console=ttymxc0\0" \ "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \ "fdt_board=eval-v3\0" \ "fdt_fixup=;\0" \ MEM_LAYOUT_ENV_SETTINGS \ UBOOT_UPDATE \ "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ "flash_eth.img && source ${loadaddr}\0" \ "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \ "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ "source ${loadaddr}\0" \ "setup=setenv setupargs fec_mac=${ethaddr} " \ "consoleblank=0 no_console_suspend=1 console=tty1 " \ "console=${console},${baudrate}n8\0 " \ "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \ "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \ "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ "source ${loadaddr}\0" \ "splashpos=m,m\0" \ "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "vidargs=fbmem=8M\0" /* Miscellaneous configurable options */ /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE #define CONFIG_SYS_INIT_SP_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) #endif /* __CONFIG_H */