* Intel FSP-M configuration Several Intel platforms require the execution of the Intel FSP (Firmware Support Package) for initialization. The FSP consists of multiple parts, one of which is the FSP-M (Memory initialization phase). This binding applies to the FSP-M for the Intel Apollo Lake SoC. The FSP-M is available on Github [1]. For detailed information on the FSP-M parameters see the documentation in FSP/ApolloLakeFspBinPkg/Docs [2]. The properties of this binding are all optional. If no properties are set the values of the FSP-M are used. [1] https://github.com/IntelFsp/FSP [2] https://github.com/IntelFsp/FSP/tree/master/ApolloLakeFspBinPkg/Docs Optional properties: - fspm,training-delay: Time taken to train DDR memory if there is no cached MRC data, in seconds. This is used to show a message if possible. For Chromebook Coral this is typically 21 seconds. For an APL board with 1GB of RAM, it may be only 6 seconds. - fspm,serial-debug-port-address: Debug Serial Port Base address - fspm,serial-debug-port-type: Debug Serial Port Type 0: NONE 1: I/O 2: MMIO (default) - fspm,serial-debug-port-device: Serial Port Debug Device 0: SOC UART0 1: SOC UART1 2: SOC UART2 (default) 3: External Device - fspm,serial-debug-port-stride-size: Debug Serial Port Stride Size 0: 1 2: 4 (default) - fspm,mrc-fast-boot: Memory Fast Boot - fspm,igd: Integrated Graphics Device - fspm,igd-dvmt50-pre-alloc: DVMT Pre-Allocated 0x02: 64 MB (default) 0x03: 96 MB 0x04: 128 MB 0x05: 160 MB 0x06: 192 MB 0x07: 224 MB 0x08: 256 MB 0x09: 288 MB 0x0A: 320 MB 0x0B: 352 MB 0x0C: 384 MB 0x0D: 416 MB 0x0E: 448 MB 0x0F: 480 MB 0x10: 512 MB - fspm,aperture-size: Aperture Size 0x1: 128 MB (default) 0x2: 256 MB 0x3: 512 MB - fspm,gtt-size: GTT Size 0x1: 2 MB 0x2: 4 MB 0x3: 8 MB (default) - fspm,primary-video-adaptor: Primary Display 0x0: AUTO (default) 0x2: IGD 0x3: PCI - fspm,package: Package 0x0: SODIMM (default) 0x1: BGA 0x2: BGA mirrored (LPDDR3 only) 0x3: SODIMM/UDIMM with Rank 1 Mirrored (DDR3L) - fspm,profile: Profile 0x01: WIO2_800_7_8_8 0x02: WIO2_1066_9_10_10 0x03: LPDDR3_1066_8_10_10 0x04: LPDDR3_1333_10_12_12 0x05: LPDDR3_1600_12_15_15 0x06: LPDDR3_1866_14_17_17 0x07: LPDDR3_2133_16_20_20 0x08: LPDDR4_1066_10_10_10 0x09: LPDDR4_1600_14_15_15 0x0A: LPDDR4_2133_20_20_20 0x0B: LPDDR4_2400_24_22_22 0x0C: LPDDR4_2666_24_24_24 0x0D: LPDDR4_2933_28_27_27 0x0E: LPDDR4_3200_28_29_29 0x0F: DDR3_1066_6_6_6 0x10: DDR3_1066_7_7_7 0x11: DDR3_1066_8_8_8 0x12: DDR3_1333_7_7_7 0x13: DDR3_1333_8_8_8 0x14: DDR3_1333_9_9_9 0x15: DDR3_1333_10_10_10 0x16: DDR3_1600_8_8_8 0x17: DDR3_1600_9_9_9 0x18: DDR3_1600_10_10_10 0x19: DDR3_1600_11_11_11 (default) 0x1A: DDR3_1866_10_10_10 0x1B: DDR3_1866_11_11_11 0x1C: DDR3_1866_12_12_12 0x1D: DDR3_1866_13_13_13 0x1E: DDR3_2133_11_11_11 0x1F: DDR3_2133_12_12_12 0x20: DDR3_2133_13_13_13 0x21: DDR3_2133_14_14_14 0x22: DDR4_1333_10_10_10 0x23: DDR4_1600_10_10_10 0x24: DDR4_1600_11_11_11 0x25: DDR4_1600_12_12_12 0x26: DDR4_1866_12_12_12 0x27: DDR4_1866_13_13_13 0x28: DDR4_1866_14_14_14 0x29: DDR4_2133_14_14_14 0x2A: DDR4_2133_15_15_15 0x2B: DDR4_2133_16_16_16 0x2C: DDR4_2400_15_15_15 0x2D: DDR4_2400_16_16_16 0x2E: DDR4_2400_17_17_17 0x2F: DDR4_2400_18_18_18 - fspm,memory-down: Memory Down 0x0: No (default) 0x1: Yes 0x2: 1MD+SODIMM (for DDR3L only) ACRD 0x3: 1x32 LPDDR4 - fspm,ddr3l-page-size: DDR3LPageSize 0x1: 1KB (default) 0x2: 2KB - fspm,ddr3-lasr: DDR3LASR - fspm,scrambler-support: ScramblerSupport - fspm,interleaved-mode: InterleavedMode - fspm,channel-hash-mask: ChannelHashMask - fspm,fspm,slice-hash-mask: SliceHashMask - fspm,channels-slices-enable: ChannelsSlices - fspm,min-ref-rate2x-enable: MinRefRate2x - fspm,dual-rank-support-enable: DualRankSupport - fspm,rmt-mode: RmtMode - fspm,memory-size-limit: MemorySizeLimit - fspm,low-memory-max-value: LowMemoryMaxValue - fspm,high-memory-max-value: HighMemoryMaxValue - fspm,disable-fast-boot: FastBoot - fspm,dimm0-spd-address: DIMM0 SPD Address - fspm,dimm1-spd-address: DIMM1 SPD Address - fspm,chX-rank-enable: Must be set to enable rank (X = 0-3) - fspm,chX-device-width: DRAM device width per DRAM channel (X = 0-3) 0: x8 1: x16 2: x32 3: x64 - fspm,chX-dram-density: Must specify the DRAM device density (X = 0-3) 0: 4Gb 1: 6Gb 2: 8Gb 3: 12Gb 4: 16Gb 5: 2Gb - fspm,chX-option: Channel options (X = 0-3) - fspm,chX-odt-config: Channel Odt Config (X = 0-3) - fspm,chX-mode2-n: Force 2N Mode (X = 0-3) 0x0: Auto 0x1: Force 2N CMD Timing Mode - fspm,chX-odt-levels: Channel Odt Levels (X = 0-3) 0: ODT Connected to SoC 1: ODT held high - fspm,rmt-check-run: RmtCheckRun - fspm,rmt-margin-check-scale-high-threshold: RmtMarginCheckScaleHighThreshold - fspm,ch-bit-swizzling: Bit_swizzling - fspm,msg-level-mask: MsgLevelMask - fspm,pre-mem-gpio-table-pin-num: PreMem GPIO Pin Number for each table - fspm,pre-mem-gpio-table-ptr: PreMem GPIO Table Pointer - fspm,pre-mem-gpio-table-entry-num: PreMem GPIO Table Entry Number - fspm,enhance-port8xh-decoding: Enhance the port 8xh decoding - fspm,spd-write-enable: SPD Data Write - fspm,mrc-data-saving: MRC Training Data Saving - fspm,oem-loading-base: OEM File Loading Address - fspm,oem-file-name: OEM File Name to Load - fspm,mrc-boot-data-ptr: - fspm,e-mmc-trace-len: eMMC Trace Length 0x0: Long 0x1: Short - fspm,skip-cse-rbp: Skip CSE RBP to support zero sized IBB - fspm,npk-en: Npk Enable 0: Disable 1: Enable 2: Debugger 3: Auto (default) - fspm,fw-trace-en: FW Trace Enable - fspm,fw-trace-destination: FW Trace Destination 1: NPK_TRACE_TO_MEMORY 2: NPK_TRACE_TO_DCI 3: NPK_TRACE_TO_BSSB 4: NPK_TRACE_TO_PTI (default) - fspm,recover-dump: NPK Recovery Dump - fspm,msc0-wrap: Memory Region 0 Buffer WrapAround 0: n0-warp 1: n1-warp (default) - fspm,msc1-wrap: Memory Region 1 Buffer WrapAround 0: n0-warp 1: n1-warp (default) - fspm,msc0-size: Memory Region 0 Buffer Size 0: 0MB (default) 1: 1MB 2: 8MB 3: 64MB 4: 128MB 5: 256MB 6: 512MB 7: 1GB - fspm,msc1-size: Memory Region 1 Buffer Size 0: 0MB (default) 1: 1MB 2: 8MB 3: 64MB 4: 128MB 5: 256MB 6: 512MB 7: 1GB - fspm,pti-mode: PTI Mode 0: 0ff 1: x4 (default) 2: x8 3: x12 4: x16 - fspm,pti-training: PTI Training 0: off (default) 1-6: 1-6 - fspm,pti-speed: 0: full 1: half 2: quarter (default) - fspm,punit-mlvl: Punit Message Level 0: 1: (default) 2-4: 2-4 - fspm,pmc-mlvl: PMC Message Level 0: 1: (default) 2-4: 2-4 - fspm,sw-trace-en: SW Trace Enable - fspm,periodic-retraining-disable: Periodic Retraining Disable - fspm,enable-reset-system: Enable Reset System - fspm,enable-s3-heci2: Enable HECI2 in S3 resume path - fspm,variable-nvs-buffer-ptr: - fspm,start-timer-ticker-of-pfet-assert: PCIE SLOT Power Enable Assert Time - PFET - fspm,rt-en: Real Time Enabling - fspm,skip-pcie-power-sequence: Skip Pcie Power Sequence Example: &host_bridge { fspm,package = ; fspm,profile = ; fspm,memory-down = ; fspm,scrambler-support = <1>; fspm,interleaved-mode = ; fspm,channel-hash-mask = <0x36>; fspm,slice-hash-mask = <0x9>; fspm,low-memory-max-value = <2048>; fspm,ch0-rank-enable = <1>; fspm,ch0-device-width = ; fspm,ch0-dram-density = ; fspm,ch0-option = <(CHX_OPTION_RANK_INTERLEAVING | CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE)>; fspm,ch0-odt-config = ; fspm,ch1-rank-enable = <1>; fspm,ch1-device-width = ; fspm,ch1-dram-density = ; fspm,ch1-option = <(CHX_OPTION_RANK_INTERLEAVING | CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE)>; fspm,ch1-odt-config = ; fspm,ch2-rank-enable = <1>; fspm,ch2-device-width = ; fspm,ch2-dram-density = ; fspm,ch2-option = <(CHX_OPTION_RANK_INTERLEAVING | CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE)>; fspm,ch2-odt-config = ; fspm,ch3-rank-enable = <1>; fspm,ch3-device-width = ; fspm,ch3-dram-density = ; fspm,ch3-option = <(CHX_OPTION_RANK_INTERLEAVING | CHX_OPTION_BANK_ADDRESS_HASHING_ENABLE)>; fspm,ch3-odt-config = ; fspm,fspm,skip-cse-rbp = <1>; fspm,ch-bit-swizzling = /bits/ 8 < /* LP4_PHYS_CH0A */ /* DQA[0:7] pins of LPDDR4 module */ 6 7 5 4 3 1 0 2 /* DQA[8:15] pins of LPDDR4 module */ 12 10 11 13 14 8 9 15 /* DQB[0:7] pins of LPDDR4 module with offset of 16 */ 16 22 23 20 18 17 19 21 /* DQB[7:15] pins of LPDDR4 module with offset of 16 */ 30 28 29 25 24 26 27 31 /* LP4_PHYS_CH0B */ /* DQA[0:7] pins of LPDDR4 module */ 7 3 5 2 6 0 1 4 /* DQA[8:15] pins of LPDDR4 module */ 9 14 12 13 10 11 8 15 /* DQB[0:7] pins of LPDDR4 module with offset of 16 */ 20 22 23 16 19 17 18 21 /* DQB[7:15] pins of LPDDR4 module with offset of 16 */ 28 24 26 27 29 30 31 25 /* LP4_PHYS_CH1A */ /* DQA[0:7] pins of LPDDR4 module */ 2 1 6 7 5 4 3 0 /* DQA[8:15] pins of LPDDR4 module */ 11 10 8 9 12 15 13 14 /* DQB[0:7] pins of LPDDR4 module with offset of 16 */ 17 23 19 16 21 22 20 18 /* DQB[7:15] pins of LPDDR4 module with offset of 16 */ 31 29 26 25 28 27 24 30 /* LP4_PHYS_CH1B */ /* DQA[0:7] pins of LPDDR4 module */ 4 3 7 5 6 1 0 2 /* DQA[8:15] pins of LPDDR4 module */ 15 9 8 11 14 13 12 10 /* DQB[0:7] pins of LPDDR4 module with offset of 16 */ 20 23 22 21 18 19 16 17 /* DQB[7:15] pins of LPDDR4 module with offset of 16 */ 25 28 30 31 26 27 24 29>; };