From 506f044131515a80c7c8479a84df028be880b34e Mon Sep 17 00:00:00 2001 From: wdenk Date: Fri, 28 Mar 2003 14:40:36 +0000 Subject: Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board: - fix SRAM and SDRAM memory sizing - add status LED support - add MAC address for second (SCC1) ethernet port Update default environment for TQM8260 board --- include/asm-ppc/u-boot.h | 5 ++++- include/configs/SXNI855T.h | 26 ++++++++++++++++++++++++++ include/configs/TQM8260.h | 24 +++++++++++++++++++----- 3 files changed, 49 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h index e417e0d..78744e2 100644 --- a/include/asm-ppc/u-boot.h +++ b/include/asm-ppc/u-boot.h @@ -68,7 +68,10 @@ typedef struct bd_info { #if defined(CONFIG_HYMOD) hymod_conf_t bi_hymod_conf; /* hymod configuration information */ #endif -#if defined(CONFIG_EVB64260) || defined(CONFIG_PN62) || defined(CONFIG_SVM_SC8xx) +#if defined(CONFIG_EVB64260) || \ + defined(CONFIG_PN62) || \ + defined(CONFIG_SXNI855T) || \ + defined(CONFIG_SVM_SC8xx) /* second onboard ethernet port */ unsigned char bi_enet1addr[6]; #endif diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index 8725f27..a7f0c21 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -81,6 +81,32 @@ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #endif +/*----------------------------------------------------------------------- + * Definitions for status LED + */ +#define CONFIG_STATUS_LED 1 /* Status LED enabled */ + +# define STATUS_LED_PAR im_ioport.iop_papar +# define STATUS_LED_DIR im_ioport.iop_padir +# define STATUS_LED_ODR im_ioport.iop_paodr +# define STATUS_LED_DAT im_ioport.iop_padat + +# define STATUS_LED_BIT 0x8000 /* LED 0 is on PA.0 */ +# define STATUS_LED_PERIOD ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ +# define STATUS_LED_STATE STATUS_LED_BLINKING + +# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */ + +# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ + +#ifdef DEV /* development (debug) settings */ +#define CONFIG_BOOT_LED_STATE STATUS_LED_OFF +#else /* production settings */ +#define CONFIG_BOOT_LED_STATE STATUS_LED_ON +#endif + +#define CONFIG_SHOW_BOOT_PROGRESS 1 + #define CONFIG_BOOTCOMMAND "bootm f8040000 f8100000" /* autoboot command */ #define CONFIG_BOOTARGS "root=/dev/ram ip=off" diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h index 9972312..3dd6714 100644 --- a/include/configs/TQM8260.h +++ b/include/configs/TQM8260.h @@ -69,11 +69,25 @@ #define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" #undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \ - "bootm" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):$(netdev):off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm $(kernel_addr)\0" \ + "flash_self=run ramargs addip;" \ + "bootm $(kernel_addr) $(ramdisk_addr)\0" \ + "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk/ppc_82xx\0" \ + "bootfile=/tftpboot/TQM8260/uImage\0" \ + "kernel_addr=40040000\0" \ + "ramdisk_addr=40100000\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" /* enable I2C and select the hardware/software driver */ #undef CONFIG_HARD_I2C /* I2C with hardware support */ -- cgit v1.1