From e985eb14ac5cff260321519a309f540909b77c16 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Tue, 26 May 2020 15:06:18 -0400 Subject: Convert CONFIG_CMD_ASKENV et al to Kconfig This converts the following to Kconfig: CONFIG_CMD_ASKENV CONFIG_CMD_BMP CONFIG_CMD_BOOTD CONFIG_CMD_CACHE CONFIG_CMD_CRC32 CONFIG_CMD_DHCP CONFIG_CMD_ENV CONFIG_CMD_EXPORTENV CONFIG_CMD_EXT2 CONFIG_CMD_EXT4 CONFIG_CMD_FLASH CONFIG_CMD_FS_GENERIC CONFIG_CMD_FUSE CONFIG_CMD_GPIO CONFIG_CMD_GPT CONFIG_CMD_GREPENV CONFIG_CMD_I2C CONFIG_CMD_IMLS CONFIG_CMD_IMPORTENV CONFIG_CMD_LOADB CONFIG_CMD_LOADS CONFIG_CMD_MEMINFO CONFIG_CMD_MII CONFIG_CMD_MTDPARTS CONFIG_CMD_NAND CONFIG_CMD_NAND_TRIMFFS CONFIG_CMD_NFS CONFIG_CMD_PCA953X CONFIG_CMD_PCA953X_INFO CONFIG_CMD_PCI CONFIG_CMD_PING CONFIG_CMD_READ CONFIG_CMD_SF CONFIG_CMD_SPI CONFIG_CMD_SPL CONFIG_CMD_SPL_WRITE_SIZE CONFIG_CMD_TIME CONFIG_CMD_TRACE CONFIG_CMD_UBI CONFIG_CMD_UBIFS CONFIG_CMD_UNZIP CONFIG_FS_EXT4 Signed-off-by: Tom Rini --- include/configs/M5249EVB.h | 4 ---- include/configs/M5253DEMO.h | 4 ---- include/configs/M5272C3.h | 3 --- include/configs/M5282EVB.h | 3 --- include/configs/MPC8308RDB.h | 4 ---- include/configs/MPC8313ERDB_NAND.h | 4 ---- include/configs/MPC8313ERDB_NOR.h | 4 ---- include/configs/MPC8315ERDB.h | 4 ---- include/configs/MPC8323ERDB.h | 4 ---- include/configs/MPC832XEMDS.h | 4 ---- include/configs/MPC8349EMDS.h | 4 ---- include/configs/MPC8349EMDS_SDRAM.h | 4 ---- include/configs/MPC837XEMDS.h | 4 ---- include/configs/MPC837XERDB.h | 4 ---- include/configs/MPC8540ADS.h | 4 ---- include/configs/MPC8610HPCD.h | 4 ---- include/configs/P2041RDB.h | 4 ---- include/configs/T4240RDB.h | 4 ---- include/configs/am335x_shc.h | 3 --- include/configs/am57xx_evm.h | 1 - include/configs/apalis-tk1.h | 2 -- include/configs/apalis_imx6.h | 6 ------ include/configs/aspenite.h | 7 ------- include/configs/astro_mcf5373l.h | 1 - include/configs/at91-sama5_common.h | 4 ---- include/configs/at91rm9200ek.h | 4 ---- include/configs/bcm7260.h | 2 -- include/configs/bcmstb.h | 3 --- include/configs/caddy2.h | 3 --- include/configs/capricorn-common.h | 5 ----- include/configs/ci20.h | 1 - include/configs/cl-som-imx7.h | 1 - include/configs/clearfog.h | 4 ---- include/configs/cobra5272.h | 4 ---- include/configs/colibri_imx6.h | 6 ------ include/configs/controlcenterd.h | 4 ---- include/configs/db-88f6720.h | 4 ---- include/configs/db-88f6820-amc.h | 4 ---- include/configs/db-88f6820-gp.h | 4 ---- include/configs/display5.h | 2 -- include/configs/dns325.h | 8 -------- include/configs/dra7xx_evm.h | 1 - include/configs/dreamplug.h | 8 -------- include/configs/ds109.h | 9 --------- include/configs/ds414.h | 4 ---- include/configs/eb_cpu5282.h | 4 ---- include/configs/edminiv2.h | 3 --- include/configs/ge_bx50v3.h | 1 - include/configs/goflexhome.h | 8 -------- include/configs/gplugd.h | 4 ---- include/configs/gw_ventana.h | 1 - include/configs/helios4.h | 4 ---- include/configs/highbank.h | 4 ---- include/configs/hikey.h | 2 -- include/configs/hrcon.h | 4 ---- include/configs/ib62x0.h | 8 -------- include/configs/iconnect.h | 8 -------- include/configs/imx6-engicam.h | 2 -- include/configs/imx6dl-mamoj.h | 2 -- include/configs/imx8mq_evk.h | 11 ----------- include/configs/imx8mq_phanbell.h | 11 ----------- include/configs/imx8qm_mek.h | 6 ------ include/configs/imx8qm_rom7720.h | 1 - include/configs/imx8qxp_mek.h | 8 -------- include/configs/integratorap.h | 3 --- include/configs/integratorcp.h | 3 --- include/configs/ls1012a2g5rdb.h | 2 -- include/configs/ls1012afrdm.h | 3 --- include/configs/ls1012afrwy.h | 2 -- include/configs/ls1012aqds.h | 3 --- include/configs/ls1012ardb.h | 3 --- include/configs/ls1021aiot.h | 7 ------- include/configs/ls1028aqds.h | 3 --- include/configs/ls1028ardb.h | 3 --- include/configs/ls1043a_common.h | 2 -- include/configs/ls1043ardb.h | 4 ---- include/configs/ls1046a_common.h | 2 -- include/configs/ls1088a_common.h | 6 ------ include/configs/ls1088aqds.h | 4 ---- include/configs/ls1088ardb.h | 4 ---- include/configs/ls2080a_common.h | 2 -- include/configs/lsxl.h | 8 -------- include/configs/maxbcm.h | 4 ---- include/configs/mpc8308_p1m.h | 4 ---- include/configs/mx25pdk.h | 1 - include/configs/mx53ppd.h | 1 - include/configs/mx7ulp_com.h | 4 ---- include/configs/mx7ulp_evk.h | 4 ---- include/configs/nas220.h | 8 -------- include/configs/nsa310s.h | 6 ------ include/configs/openrd.h | 8 -------- include/configs/pico-imx8mq.h | 11 ----------- include/configs/picosam9g45.h | 4 ---- include/configs/pogo_e02.h | 8 -------- include/configs/poplar.h | 1 - include/configs/qemu-mips.h | 4 ---- include/configs/qemu-mips64.h | 4 ---- include/configs/qemu-ppce500.h | 4 ---- include/configs/s32v234evb.h | 4 ---- include/configs/sama5d27_som1_ek.h | 1 - include/configs/sama5d2_icp.h | 1 - include/configs/sandbox.h | 1 - include/configs/sbc8349.h | 4 ---- include/configs/sheevaplug.h | 12 ------------ include/configs/snapper9g45.h | 4 ---- include/configs/somlabs_visionsom_6ull.h | 2 -- include/configs/stih410-b2260.h | 1 - include/configs/stm32f429-discovery.h | 4 ---- include/configs/stm32f429-evaluation.h | 4 ---- include/configs/stm32f469-discovery.h | 4 ---- include/configs/stm32f746-disco.h | 3 --- include/configs/stm32h743-disco.h | 3 --- include/configs/stm32h743-eval.h | 3 --- include/configs/strider.h | 4 ---- include/configs/t4qds.h | 4 ---- include/configs/tb100.h | 4 ---- include/configs/theadorable-x86-common.h | 1 - include/configs/theadorable.h | 4 ---- include/configs/ti816x_evm.h | 2 -- include/configs/topic_miami.h | 3 --- include/configs/tplink_wdr4300.h | 2 -- include/configs/ve8313.h | 4 ---- include/configs/vme8349.h | 3 --- include/configs/vyasa-rk3288.h | 2 -- include/configs/x530.h | 8 -------- include/configs/x86-common.h | 4 ---- include/configs/xilinx_versal_mini.h | 1 - include/configs/xilinx_zynqmp.h | 1 - include/configs/xilinx_zynqmp_mini.h | 1 - include/configs/zmx25.h | 8 -------- 130 files changed, 514 deletions(-) (limited to 'include/configs') diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index 065e1e9..de71329 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -31,10 +31,6 @@ */ #undef CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */ #define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 69e3fba..54f6fa7 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -24,10 +24,6 @@ . = DEFINED(env_offset) ? env_offset : .; \ env/embedded.o(.text*); -/* - * Command line configuration. - */ - #ifdef CONFIG_IDE /* ATA */ # define CONFIG_IDE_RESET 1 diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 5056629..2cdd436 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -39,9 +39,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ #ifdef CONFIG_MCFFEC # define CONFIG_MII_INIT 1 # define CONFIG_SYS_DISCOVER_PHY diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index e7859f3..6a50a25 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -36,9 +36,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ #ifdef CONFIG_MCFFEC # define CONFIG_MII_INIT 1 # define CONFIG_SYS_DISCOVER_PHY diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index 788a325..eccbe58 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -258,10 +258,6 @@ #define CONFIG_BOOTP_BOOTFILESIZE /* - * Command line configuration. - */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ diff --git a/include/configs/MPC8313ERDB_NAND.h b/include/configs/MPC8313ERDB_NAND.h index d8485f6..e70b907 100644 --- a/include/configs/MPC8313ERDB_NAND.h +++ b/include/configs/MPC8313ERDB_NAND.h @@ -306,10 +306,6 @@ #define CONFIG_BOOTP_BOOTFILESIZE /* - * Command line configuration. - */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ diff --git a/include/configs/MPC8313ERDB_NOR.h b/include/configs/MPC8313ERDB_NOR.h index 029d2f1..3824586 100644 --- a/include/configs/MPC8313ERDB_NOR.h +++ b/include/configs/MPC8313ERDB_NOR.h @@ -275,10 +275,6 @@ #define CONFIG_BOOTP_BOOTFILESIZE /* - * Command line configuration. - */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 2c35223..da68f3c 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -304,10 +304,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index ff18d10..eaa95bb 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -220,10 +220,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index bfcff2e..d2d1b2f 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -244,10 +244,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 0a80a60..4707dcf 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -278,10 +278,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/MPC8349EMDS_SDRAM.h b/include/configs/MPC8349EMDS_SDRAM.h index 79dd956..d92312b 100644 --- a/include/configs/MPC8349EMDS_SDRAM.h +++ b/include/configs/MPC8349EMDS_SDRAM.h @@ -333,10 +333,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 1254b4f..b5660f9 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -304,10 +304,6 @@ extern int board_pci_host_broken(void); */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ #ifdef CONFIG_MMC diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 8c2297a..7ff0b77 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -322,10 +322,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ #ifdef CONFIG_MMC diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 2ba7322..f78782a 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -288,10 +288,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index eb85141..b2acc72 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -391,10 +391,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #define CONFIG_WATCHDOG /* watchdog enabled */ #define CONFIG_SYS_WATCHDOG_FREQ 5000 /* Feed interval, 5s */ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 59404cb..94cbe10 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -485,10 +485,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ /* - * Command line configuration. - */ - -/* * USB */ #define CONFIG_HAS_FSL_DR_USB diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index fcfd3b0..9832f85 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -249,10 +249,6 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ /* - * Command line configuration. - */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h index 6e1a40c..cf96437 100644 --- a/include/configs/am335x_shc.h +++ b/include/configs/am335x_shc.h @@ -15,9 +15,6 @@ #include /* settings we don;t want on this board */ -#undef CONFIG_CMD_SPI - -#define CONFIG_CMD_CACHE #ifndef CONFIG_SPL_BUILD # define CONFIG_TIMESTAMP diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index fea9300..e94b7c8 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -40,7 +40,6 @@ DFU_ALT_INFO_RAM \ DFU_ALT_INFO_QSPI #else -#undef CONFIG_CMD_BOOTD #ifdef CONFIG_SPL_DFU #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000 #define DFUARGS \ diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index 8ca571b..965259c 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -143,8 +143,6 @@ #undef CONFIG_SYS_MAXARGS #define CONFIG_SYS_MAXARGS 32 -#define CONFIG_CMD_TIME - #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index 6f03058..d5a0625 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -82,10 +82,6 @@ #define CONFIG_ENV_OVERWRITE /* Command definition */ -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_FLASH #undef CONFIG_IPADDR #define CONFIG_IPADDR 192.168.10.2 @@ -234,6 +230,4 @@ #define CONFIG_SYS_MMC_ENV_PART 1 #endif -#define CONFIG_CMD_TIME - #endif /* __CONFIG_H */ diff --git a/include/configs/aspenite.h b/include/configs/aspenite.h index 717ed53..88e1bf1 100644 --- a/include/configs/aspenite.h +++ b/include/configs/aspenite.h @@ -23,13 +23,6 @@ */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000) -/* - * Commands configuration - */ -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index 7eec226..891240c 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -38,7 +38,6 @@ #error No card type defined! #endif -/* Command line configuration */ /* * CONFIG_RAM defines if u-boot is loaded via BDM (or started from * a different bootloader that has already performed RAM setup) or diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index 6e9793a..624b05a 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -29,10 +29,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #ifdef CONFIG_SD_BOOT #ifdef CONFIG_ENV_IS_IN_MMC diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h index 37b9cc3..378f9dc 100644 --- a/include/configs/at91rm9200ek.h +++ b/include/configs/at91rm9200ek.h @@ -101,10 +101,6 @@ #define CONFIG_USART_ID 0/* ignored in arm */ /* - * Command line configuration. - */ - -/* * Network Driver Setting */ #define CONFIG_DRIVER_AT91EMAC diff --git a/include/configs/bcm7260.h b/include/configs/bcm7260.h index 3bd85ff..31fd6ec 100644 --- a/include/configs/bcm7260.h +++ b/include/configs/bcm7260.h @@ -33,6 +33,4 @@ #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_SYS_MMC_ENV_PART 0 -#define CONFIG_CMD_GPT - #endif /* __CONFIG_H */ diff --git a/include/configs/bcmstb.h b/include/configs/bcmstb.h index b906c75..d1120fb 100644 --- a/include/configs/bcmstb.h +++ b/include/configs/bcmstb.h @@ -127,8 +127,6 @@ extern phys_addr_t prior_stage_fdt_address; /* * Command configuration. */ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE /* * Flash configuration. @@ -141,7 +139,6 @@ extern phys_addr_t prior_stage_fdt_address; * Filesystem configuration. */ #define CONFIG_DOS_PARTITION -#define CONFIG_CMD_FS_GENERIC /* * Environment configuration. diff --git a/include/configs/caddy2.h b/include/configs/caddy2.h index 4597121..35f4b74 100644 --- a/include/configs/caddy2.h +++ b/include/configs/caddy2.h @@ -208,9 +208,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ #define CONFIG_SYS_RTC_BUS_NUM 0x01 #define CONFIG_SYS_I2C_RTC_ADDR 0x32 diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h index 2ad54f4..c671cb5 100644 --- a/include/configs/capricorn-common.h +++ b/include/configs/capricorn-common.h @@ -45,12 +45,7 @@ #define CONFIG_BOARD_EARLY_INIT_F /* Commands */ -#define CONFIG_CMD_READ -#undef CONFIG_CMD_EXPORTENV -#undef CONFIG_CMD_IMPORTENV -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_CRC32 #undef CONFIG_BOOTM_NETBSD /* ENET Config */ diff --git a/include/configs/ci20.h b/include/configs/ci20.h index e6b4e23..67f5bbe 100644 --- a/include/configs/ci20.h +++ b/include/configs/ci20.h @@ -42,7 +42,6 @@ #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_OVERWRITE -/* Command line configuration. */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ #define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE diff --git a/include/configs/cl-som-imx7.h b/include/configs/cl-som-imx7.h index b923bae..78f73fc 100644 --- a/include/configs/cl-som-imx7.h +++ b/include/configs/cl-som-imx7.h @@ -44,7 +44,6 @@ #define CONFIG_SYS_I2C_EEPROM_BUS SYS_I2C_BUS_SOM #define CONFIG_PCA953X -#define CONFIG_CMD_PCA953X #define CONFIG_SYS_I2C_PCA953X_ADDR 0x20 #define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} } diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index 459e0d9..74be2f1 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -20,10 +20,6 @@ #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ /* - * Commands configuration - */ - -/* * SDIO/MMC Card Configuration */ #define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index fe23c23..c859616 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -95,10 +95,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #ifdef CONFIG_MCFFEC # define CONFIG_MII_INIT 1 # define CONFIG_SYS_DISCOVER_PHY diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index 3d248ef..6beef25 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -70,10 +70,6 @@ #define CONFIG_ENV_OVERWRITE /* Command definition */ -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_FLASH #undef CONFIG_IPADDR #define CONFIG_IPADDR 192.168.10.2 @@ -213,6 +209,4 @@ #define CONFIG_SYS_MMC_ENV_PART 1 #endif -#define CONFIG_CMD_TIME - #endif /* __CONFIG_H */ diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index 34d268e..823586c 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -276,10 +276,6 @@ #define CONFIG_SYS_MMC_ENV_DEV 0 #endif -/* - * Command line configuration. - */ - #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ #ifndef CONFIG_TRAILBLAZER diff --git a/include/configs/db-88f6720.h b/include/configs/db-88f6720.h index 0735ab2..213883e 100644 --- a/include/configs/db-88f6720.h +++ b/include/configs/db-88f6720.h @@ -17,10 +17,6 @@ */ #define CONFIG_SYS_TCLK 200000000 /* 200MHz */ -/* - * Commands configuration - */ - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MVTWSI diff --git a/include/configs/db-88f6820-amc.h b/include/configs/db-88f6820-amc.h index f06853b..fe9a7ab 100644 --- a/include/configs/db-88f6820-amc.h +++ b/include/configs/db-88f6820-amc.h @@ -12,10 +12,6 @@ #define CONFIG_SYS_TCLK 200000000 /* 200MHz */ -/* - * Commands configuration - */ - /* USB/EHCI configuration */ #define CONFIG_EHCI_IS_TDI diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index 26c2240..d4207be 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -12,10 +12,6 @@ #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ -/* - * Commands configuration - */ - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MVTWSI diff --git a/include/configs/display5.h b/include/configs/display5.h index 6600b94..2e5dbfe 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -10,9 +10,7 @@ #include "mx6_common.h" /* Falcon Mode */ -#define CONFIG_CMD_SPL #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 -#define CONFIG_CMD_SPL_WRITE_SIZE (44 * SZ_1K) /* Falcon Mode - MMC support */ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x3F00 diff --git a/include/configs/dns325.h b/include/configs/dns325.h index 41079e8..6210762 100644 --- a/include/configs/dns325.h +++ b/include/configs/dns325.h @@ -24,14 +24,6 @@ #define CONFIG_KW88F6281 /* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -/* - * Commands configuration - */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* Remove or override few declarations from mv-common.h */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index fbe431b..14cd82f 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -48,7 +48,6 @@ #endif #ifdef CONFIG_SPL_BUILD -#undef CONFIG_CMD_BOOTD #ifdef CONFIG_SPL_DFU #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000 #define DFUARGS \ diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h index 3e3f4c1..09bac01 100644 --- a/include/configs/dreamplug.h +++ b/include/configs/dreamplug.h @@ -17,14 +17,6 @@ #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ #define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG -/* - * Commands configuration - */ - -/* - * mv-plug-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-plug-common.h" /* diff --git a/include/configs/ds109.h b/include/configs/ds109.h index 594cc82..1f033ab 100644 --- a/include/configs/ds109.h +++ b/include/configs/ds109.h @@ -19,15 +19,6 @@ */ #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ -/* - * Commands configuration - */ -#define CONFIG_CMD_EXT2 - -/* - * mv-plug-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-plug-common.h" /* diff --git a/include/configs/ds414.h b/include/configs/ds414.h index b179b99..a92e788 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -17,10 +17,6 @@ */ #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ -/* - * Commands configuration - */ - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MVTWSI diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index d441f28..3dab934 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -43,10 +43,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #define CONFIG_MCFTMR #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index cfee974..9de0543 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -104,9 +104,6 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ -/* - * Commands configuration - */ /* * Network diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index e40be93..47c5974 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -168,7 +168,6 @@ #define CONFIG_HIDE_LOGO_VERSION #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP -#define CONFIG_CMD_BMP #define CONFIG_IMX6_PWM_PER_CLK 66000000 diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h index afd48d5..5132504 100644 --- a/include/configs/goflexhome.h +++ b/include/configs/goflexhome.h @@ -37,14 +37,6 @@ #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) -/* - * Commands configuration - */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h index 2f66af3..a0554d7 100644 --- a/include/configs/gplugd.h +++ b/include/configs/gplugd.h @@ -29,10 +29,6 @@ */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000) -/* - * Commands configuration - */ - /* Network configuration */ #ifdef CONFIG_CMD_NET #define CONFIG_ARMADA100_FEC diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index bf4b3b2..5b8f242 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -102,7 +102,6 @@ #define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c /* Various command support */ -#define CONFIG_CMD_UNZIP /* gzwrite */ /* Ethernet support */ #define CONFIG_FEC_MXC diff --git a/include/configs/helios4.h b/include/configs/helios4.h index 671c3d2..31e2e78 100644 --- a/include/configs/helios4.h +++ b/include/configs/helios4.h @@ -21,10 +21,6 @@ #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ /* - * Commands configuration - */ - -/* * SDIO/MMC Card Configuration */ #define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE diff --git a/include/configs/highbank.h b/include/configs/highbank.h index 76add4e..bdbaa47 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -30,10 +30,6 @@ #define CONFIG_CALXEDA_XGMAC -/* - * Command line configuration. - */ - #define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_RESET_TO_RETRY diff --git a/include/configs/hikey.h b/include/configs/hikey.h index 2732c01..70cd682 100644 --- a/include/configs/hikey.h +++ b/include/configs/hikey.h @@ -55,8 +55,6 @@ #define CONFIG_HIKEY_GPIO -/* Command line configuration */ - /* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h index 76c4ee9..ea8d54a 100644 --- a/include/configs/hrcon.h +++ b/include/configs/hrcon.h @@ -355,10 +355,6 @@ void fpga_control_clear(unsigned int bus, int pin); #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ /* - * Command line configuration. - */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index f27dbfb..41483a2 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -15,14 +15,6 @@ #define CONFIG_KW88F6281 /* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -/* - * Commands configuration - */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h index 3754cd1..c99490b 100644 --- a/include/configs/iconnect.h +++ b/include/configs/iconnect.h @@ -20,14 +20,6 @@ */ #define CONFIG_MACH_TYPE MACH_TYPE_ICONNECT -/* - * Commands configuration - */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h index 72ae89c..4c7a0cb 100644 --- a/include/configs/imx6-engicam.h +++ b/include/configs/imx6-engicam.h @@ -159,9 +159,7 @@ #ifdef CONFIG_SPL_OS_BOOT # define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" # define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -# define CONFIG_CMD_SPL # define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 -# define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K) /* MMC support: args@1MB kernel@2MB */ # define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ diff --git a/include/configs/imx6dl-mamoj.h b/include/configs/imx6dl-mamoj.h index d4a613d..d70c6db 100644 --- a/include/configs/imx6dl-mamoj.h +++ b/include/configs/imx6dl-mamoj.h @@ -60,9 +60,7 @@ /* Falcon */ #define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_CMD_SPL #define CONFIG_SYS_SPL_ARGS_ADDR 0x13000000 -#define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K) /* MMC support: args@1MB kernel@2MB */ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index 9418326..3835eab 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -61,18 +61,9 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_LATE_INIT -#undef CONFIG_CMD_EXPORTENV -#undef CONFIG_CMD_IMPORTENV -#undef CONFIG_CMD_IMLS - -#undef CONFIG_CMD_CRC32 - /* ENET Config */ /* ENET1 */ #if defined(CONFIG_CMD_NET) -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_MII #define CONFIG_ETHPRIME "FEC" @@ -209,8 +200,6 @@ #define CONFIG_MXC_GPIO -#define CONFIG_CMD_FUSE - /* I2C Configs */ #define CONFIG_SYS_I2C_SPEED 100000 diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index 72edbc7..6d038f2 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -57,18 +57,9 @@ #define CONFIG_BOARD_EARLY_INIT_F -#undef CONFIG_CMD_EXPORTENV -#undef CONFIG_CMD_IMPORTENV -#undef CONFIG_CMD_IMLS - -#undef CONFIG_CMD_CRC32 - /* ENET Config */ /* ENET1 */ #if defined(CONFIG_CMD_NET) -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_MII #define CONFIG_ETHPRIME "FEC" @@ -200,8 +191,6 @@ #define CONFIG_MXC_GPIO -#define CONFIG_CMD_FUSE - /* I2C Configs */ #define CONFIG_SYS_I2C_SPEED 100000 diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index d7dd3e2..8324767 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -40,12 +40,6 @@ /* Flat Device Tree Definitions */ #define CONFIG_OF_BOARD_SETUP -#undef CONFIG_CMD_EXPORTENV -#undef CONFIG_CMD_IMPORTENV -#undef CONFIG_CMD_IMLS - -#undef CONFIG_CMD_CRC32 - #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5B010000 #define USDHC2_BASE_ADDR 0x5B020000 diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h index eebb8dc..89d7ada 100644 --- a/include/configs/imx8qm_rom7720.h +++ b/include/configs/imx8qm_rom7720.h @@ -30,7 +30,6 @@ #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG /* FUSE command */ -#define CONFIG_CMD_FUSE /* Boot M4 */ #define M4_BOOT_ENV \ diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index a2046e1..a58f68c 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -40,12 +40,6 @@ /* Flat Device Tree Definitions */ #define CONFIG_OF_BOARD_SETUP -#undef CONFIG_CMD_EXPORTENV -#undef CONFIG_CMD_IMPORTENV -#undef CONFIG_CMD_IMLS - -#undef CONFIG_CMD_CRC32 - #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5B010000 #define USDHC2_BASE_ADDR 0x5B020000 @@ -189,8 +183,6 @@ #ifndef CONFIG_DM_PCA953X #define CONFIG_PCA953X -#define CONFIG_CMD_PCA953X -#define CONFIG_CMD_PCA953X_INFO #endif /* Networking */ diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index f15e08f..cc18347 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -24,9 +24,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ #define CONFIG_BOOTCOMMAND "" /* Flash settings */ diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index d8a474d..c4203ce 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -27,9 +27,6 @@ #define CONFIG_SMC91111_BASE 0xC8000000 #undef CONFIG_SMC91111_EXT_PHY -/* - * Command line configuration. - */ #define CONFIG_BOOTCOMMAND "tftpboot ; bootm" #define CONFIG_SERVERIP 192.168.1.100 #define CONFIG_IPADDR 192.168.1.104 diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h index 869e0ad..86cc4b6 100644 --- a/include/configs/ls1012a2g5rdb.h +++ b/include/configs/ls1012a2g5rdb.h @@ -12,7 +12,6 @@ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 #define CONFIG_SYS_SDRAM_SIZE 0x40000000 -#define CONFIG_CMD_MEMINFO /* MMC */ #ifdef CONFIG_MMC @@ -30,7 +29,6 @@ #define CONFIG_SYS_SCSI_MAX_LUN 1 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN) -#define CONFIG_CMD_MEMINFO #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h index 54ea434..f8cb97b 100644 --- a/include/configs/ls1012afrdm.h +++ b/include/configs/ls1012afrdm.h @@ -13,7 +13,6 @@ #define CONFIG_CHIP_SELECTS_PER_CTRL 1 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 -#define CONFIG_CMD_MEMINFO #ifndef CONFIG_SPL_BUILD #undef BOOT_TARGET_DEVICES @@ -70,6 +69,4 @@ #define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd" #endif -#define CONFIG_CMD_MEMINFO - #endif /* __LS1012ARDB_H__ */ diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h index 1ea6548..2e20e11 100644 --- a/include/configs/ls1012afrwy.h +++ b/include/configs/ls1012afrwy.h @@ -21,7 +21,6 @@ #define SYS_SDRAM_SIZE_512 0x20000000 #define SYS_SDRAM_SIZE_1024 0x40000000 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 -#define CONFIG_CMD_MEMINFO /* ENV */ #define CONFIG_SYS_FSL_QSPI_BASE 0x40000000 @@ -114,7 +113,6 @@ #define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\ "env exists secureboot && esbc_halt;" #endif -#define CONFIG_CMD_MEMINFO #include diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index 99840dc..9498a03 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -12,7 +12,6 @@ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 #define CONFIG_SYS_SDRAM_SIZE 0x40000000 -#define CONFIG_CMD_MEMINFO /* * QIXIS Definitions @@ -104,7 +103,5 @@ #define CONFIG_PCI_SCAN_SHOW -#define CONFIG_CMD_MEMINFO - #include #endif /* __LS1012AQDS_H__ */ diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h index 8fb7565..7eb1ec9 100644 --- a/include/configs/ls1012ardb.h +++ b/include/configs/ls1012ardb.h @@ -13,7 +13,6 @@ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 #define CONFIG_SYS_SDRAM_SIZE 0x40000000 -#define CONFIG_CMD_MEMINFO /* * I2C IO expander @@ -49,8 +48,6 @@ #define CONFIG_PCI_SCAN_SHOW -#define CONFIG_CMD_MEMINFO - #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ "verify=no\0" \ diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 6e94a2a..59d65f8 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -97,7 +97,6 @@ /* * I2C */ -#define CONFIG_CMD_I2C #ifndef CONFIG_DM_I2C #define CONFIG_SYS_I2C @@ -141,7 +140,6 @@ /* DM SPI */ #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI) -#define CONFIG_CMD_SF #define CONFIG_DM_SPI_FLASH #endif @@ -182,8 +180,6 @@ #define CONFIG_PCI_SCAN_SHOW #endif -#define CONFIG_CMD_MII - #define CONFIG_CMDLINE_TAG #define CONFIG_PEN_ADDR_BIG_ENDIAN @@ -205,9 +201,6 @@ */ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_MEMINFO - #define CONFIG_SYS_LOAD_ADDR 0x82000000 #define CONFIG_LS102XA_STREAM_ID diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h index b910169..7bb740f 100644 --- a/include/configs/ls1028aqds.h +++ b/include/configs/ls1028aqds.h @@ -77,9 +77,6 @@ #define CONFIG_SCSI_AHCI_PLAT #define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 -#ifndef CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT2 -#endif #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 #define CONFIG_SYS_SCSI_MAX_LUN 1 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h index 0f289cb..0745011 100644 --- a/include/configs/ls1028ardb.h +++ b/include/configs/ls1028ardb.h @@ -59,9 +59,6 @@ #endif /* SATA */ -#ifndef CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT2 -#endif #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 #define CONFIG_SYS_SCSI_MAX_LUN 1 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index 985f404..b18eab5 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -165,8 +165,6 @@ #endif #endif -/* Command line configuration */ - /* MMC */ #ifndef SPL_NO_MMC #ifdef CONFIG_MMC diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 4ad51f1..bfaa574 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -35,7 +35,6 @@ #ifdef CONFIG_SD_BOOT #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg -#define CONFIG_CMD_SPL #define CONFIG_SYS_SPL_ARGS_ADDR 0x90000000 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x10000 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x500 @@ -275,9 +274,6 @@ /* SATA */ #ifndef SPL_NO_SATA -#ifndef CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT2 -#endif #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 #define CONFIG_SYS_SCSI_MAX_LUN 2 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 24db23b..8fe6937 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -160,8 +160,6 @@ CONFIG_SYS_SCSI_MAX_LUN) #endif -/* Command line configuration */ - /* MMC */ #ifndef SPL_NO_MMC #ifdef CONFIG_MMC diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index a737342..596f14b 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -50,10 +50,6 @@ */ #define CPU_RELEASE_ADDR secondary_boot_func -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#endif - /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024) @@ -143,8 +139,6 @@ unsigned long long get_qixis_addr(void); #if defined(CONFIG_FSL_MC_ENET) #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (128UL * 1024 * 1024) #endif -/* Command line configuration */ -#define CONFIG_CMD_CACHE /* Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index 2bc910a..1e9e6a8 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -29,7 +29,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_QIXIS_I2C_ACCESS #define SYS_NO_FLASH -#undef CONFIG_CMD_IMLS #define CONFIG_SYS_CLK_FREQ 100000000 #define CONFIG_DDR_CLK_FREQ 100000000 #else @@ -150,7 +149,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) @@ -367,8 +365,6 @@ unsigned long get_board_ddr_clk(void); #endif #endif -#define CONFIG_CMD_MEMINFO - #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE #else diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index 4752073..16e0486 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -16,7 +16,6 @@ #define CONFIG_QIXIS_I2C_ACCESS #endif #define SYS_NO_FLASH -#undef CONFIG_CMD_IMLS #endif #define CONFIG_SYS_CLK_FREQ 100000000 @@ -121,7 +120,6 @@ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) @@ -259,8 +257,6 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -#define CONFIG_CMD_MEMINFO - #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE #else diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index b58776a..410872d 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -149,8 +149,6 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (128UL * 1024 * 1024) #endif -/* Command line configuration */ - /* Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index faa74c6..0c0ab24 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -32,14 +32,6 @@ #define CONFIG_KIRKWOOD_GPIO -/* - * Commands configuration - */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* loading initramfs images without uimage header */ diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index 9cc1305..0c2185c 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -17,10 +17,6 @@ */ #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ -/* - * Commands configuration - */ - /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MVTWSI diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index d6b21f1..74bfcee 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -237,10 +237,6 @@ #define CONFIG_BOOTP_BOOTFILESIZE /* - * Command line configuration. - */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index 683d442..a7be854 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -81,7 +81,6 @@ /* Fuse API support */ #define CONFIG_FSL_IIM -#define CONFIG_CMD_FUSE /* Ethernet Configs */ diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h index c32f026..aac9ec6 100644 --- a/include/configs/mx53ppd.h +++ b/include/configs/mx53ppd.h @@ -144,7 +144,6 @@ /* FLASH and environment organization */ #define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_CMD_FUSE #define CONFIG_FSL_IIM #define CONFIG_BCH diff --git a/include/configs/mx7ulp_com.h b/include/configs/mx7ulp_com.h index f7f9404..78bdfab 100644 --- a/include/configs/mx7ulp_com.h +++ b/include/configs/mx7ulp_com.h @@ -88,9 +88,5 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) -#define CONFIG_CMD_CACHE -#endif - #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #endif /* __CONFIG_H */ diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h index 9216b09..942b7dd 100644 --- a/include/configs/mx7ulp_evk.h +++ b/include/configs/mx7ulp_evk.h @@ -143,8 +143,4 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) -#define CONFIG_CMD_CACHE -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/nas220.h b/include/configs/nas220.h index 5251db9..b95c7fc 100644 --- a/include/configs/nas220.h +++ b/include/configs/nas220.h @@ -37,14 +37,6 @@ #define MV88E1116_RGMII_TXTM_CTRL (1 << 4) #define MV88E1116_RGMII_RXTM_CTRL (1 << 5) -/* - * Commands configuration - */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h index ce1e321..13812c4 100644 --- a/include/configs/nsa310s.h +++ b/include/configs/nsa310s.h @@ -15,12 +15,6 @@ #define CONFIG_KW88F6702 1 /* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -/* commands configuration */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* environment variables configuration */ diff --git a/include/configs/openrd.h b/include/configs/openrd.h index 5c59cab..e9fd0fc 100644 --- a/include/configs/openrd.h +++ b/include/configs/openrd.h @@ -20,14 +20,6 @@ #define CONFIG_KW88F6281 1 /* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -/* - * Commands configuration - */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index f4da38a..708e9c7 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -57,18 +57,9 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_LATE_INIT -#undef CONFIG_CMD_EXPORTENV -#undef CONFIG_CMD_IMPORTENV -#undef CONFIG_CMD_IMLS - -#undef CONFIG_CMD_CRC32 - /* ENET Config */ /* ENET1 */ #if defined(CONFIG_CMD_NET) -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII #define CONFIG_MII #define CONFIG_ETHPRIME "FEC" @@ -181,8 +172,6 @@ #define CONFIG_MXC_GPIO -#define CONFIG_CMD_FUSE - /* I2C Configs */ #define CONFIG_SYS_I2C_SPEED 100000 diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h index 771fd8d..2747c0c 100644 --- a/include/configs/picosam9g45.h +++ b/include/configs/picosam9g45.h @@ -57,10 +57,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - /* SDRAM */ #define PHYS_SDRAM_1 ATMEL_BASE_CS1 /* on DDRSDRC1 */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ diff --git a/include/configs/pogo_e02.h b/include/configs/pogo_e02.h index bb24739..cbe5022 100644 --- a/include/configs/pogo_e02.h +++ b/include/configs/pogo_e02.h @@ -24,14 +24,6 @@ #define CONFIG_KW88F6281 /* SOC Name */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -/* - * Commands configuration - */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* diff --git a/include/configs/poplar.h b/include/configs/poplar.h index 81c7f25..2c7dc8b 100644 --- a/include/configs/poplar.h +++ b/include/configs/poplar.h @@ -52,7 +52,6 @@ BOOTENV -/* Command line configuration */ #define CONFIG_SYS_MMC_ENV_DEV 0 /* Monitor Command Prompt */ diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index 4227a28..e96118a 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -30,10 +30,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #define CONFIG_DRIVER_NE2000 #define CONFIG_DRIVER_NE2000_BASE 0xb4000300 diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h index 801ba76..676e7c1 100644 --- a/include/configs/qemu-mips64.h +++ b/include/configs/qemu-mips64.h @@ -30,10 +30,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #define CONFIG_DRIVER_NE2000 #define CONFIG_DRIVER_NE2000_BASE 0xffffffffb4000300 diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index cfbd472..03b0896 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -108,10 +108,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); #define CONFIG_LOADS_ECHO /* echo on for serial download */ /* - * Command line configuration. - */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ diff --git a/include/configs/s32v234evb.h b/include/configs/s32v234evb.h index 5821d21..5c6692c 100644 --- a/include/configs/s32v234evb.h +++ b/include/configs/s32v234evb.h @@ -35,7 +35,6 @@ #define CONFIG_SKIP_LOWLEVEL_INIT /* Config CACHE */ -#define CONFIG_CMD_CACHE #define CONFIG_SYS_FULL_VA @@ -68,12 +67,9 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC_BASE_ADDR #define CONFIG_SYS_FSL_ESDHC_NUM 1 -/* #define CONFIG_CMD_EXT2 EXT2 Support */ - #if 0 /* Ethernet config */ -#define CONFIG_CMD_MII #define CONFIG_FEC_MXC #define IMX_FEC_BASE ENET_BASE_ADDR #define CONFIG_FEC_XCV_TYPE RMII diff --git a/include/configs/sama5d27_som1_ek.h b/include/configs/sama5d27_som1_ek.h index 7343201..8e98254 100644 --- a/include/configs/sama5d27_som1_ek.h +++ b/include/configs/sama5d27_som1_ek.h @@ -28,7 +28,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ /* NAND flash */ -#undef CONFIG_CMD_NAND /* SPI flash */ diff --git a/include/configs/sama5d2_icp.h b/include/configs/sama5d2_icp.h index 17028ca..2d1ba75 100644 --- a/include/configs/sama5d2_icp.h +++ b/include/configs/sama5d2_icp.h @@ -30,7 +30,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ /* NAND flash */ -#undef CONFIG_CMD_NAND /* SPI flash */ #define CONFIG_SF_DEFAULT_SPEED 66000000 diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 484a15d..2a81f3a 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -8,7 +8,6 @@ #ifdef FTRACE #define CONFIG_TRACE -#define CONFIG_CMD_TRACE #define CONFIG_TRACE_BUFFER_SIZE (16 << 20) #define CONFIG_TRACE_EARLY_SIZE (16 << 20) #define CONFIG_TRACE_EARLY diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 55b9a3c..5adf5a8 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -232,10 +232,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ /* diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index 3ee6e68..e1f8fb8 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -14,18 +14,6 @@ */ #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -/* - * Commands configuration - */ - -/* - * Standard filesystems - */ - -/* - * mv-plug-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-plug-common.h" /* diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h index be36e9f..fcd35b7 100644 --- a/include/configs/snapper9g45.h +++ b/include/configs/snapper9g45.h @@ -99,8 +99,4 @@ /* U-Boot memory settings */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) -/* Command line configuration */ -#define CONFIG_CMD_MII -#define CONFIG_CMD_CACHE - #endif /* __CONFIG_H */ diff --git a/include/configs/somlabs_visionsom_6ull.h b/include/configs/somlabs_visionsom_6ull.h index 85c68cd..c3f81ff 100644 --- a/include/configs/somlabs_visionsom_6ull.h +++ b/include/configs/somlabs_visionsom_6ull.h @@ -29,8 +29,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 1 #endif /* CONFIG_FSL_USDHC */ -#define CONFIG_CMD_READ - #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ "console=ttymxc0\0" \ diff --git a/include/configs/stih410-b2260.h b/include/configs/stih410-b2260.h index f393aa0..169b9ef 100644 --- a/include/configs/stih410-b2260.h +++ b/include/configs/stih410-b2260.h @@ -44,7 +44,6 @@ BOOTENV /* Extra Commands */ -#define CONFIG_CMD_ASKENV #define CONFIG_SETUP_MEMORY_TAGS diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h index a8b3a17..9d029fb 100644 --- a/include/configs/stm32f429-discovery.h +++ b/include/configs/stm32f429-discovery.h @@ -44,8 +44,4 @@ "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \ "bootm 0x08044000 - 0x08042000\0" -/* - * Command line configuration. - */ - #endif /* __CONFIG_H */ diff --git a/include/configs/stm32f429-evaluation.h b/include/configs/stm32f429-evaluation.h index a715031..8390535 100644 --- a/include/configs/stm32f429-evaluation.h +++ b/include/configs/stm32f429-evaluation.h @@ -51,8 +51,4 @@ "ramdisk_addr_r=0x00438000\0" \ BOOTENV -/* - * Command line configuration. - */ - #endif /* __CONFIG_H */ diff --git a/include/configs/stm32f469-discovery.h b/include/configs/stm32f469-discovery.h index 8212fb6..57fb6b2 100644 --- a/include/configs/stm32f469-discovery.h +++ b/include/configs/stm32f469-discovery.h @@ -51,8 +51,4 @@ "ramdisk_addr_r=0x00438000\0" \ BOOTENV -/* - * Command line configuration. - */ - #endif /* __CONFIG_H */ diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h index 529152f..c20c8a7 100644 --- a/include/configs/stm32f746-disco.h +++ b/include/configs/stm32f746-disco.h @@ -58,9 +58,6 @@ "ramdisk_addr_r=0xC0438000\0" \ BOOTENV -/* - * Command line configuration. - */ #define CONFIG_BOARD_LATE_INIT #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/stm32h743-disco.h b/include/configs/stm32h743-disco.h index 39c93ee..71d6ab0 100644 --- a/include/configs/stm32h743-disco.h +++ b/include/configs/stm32h743-disco.h @@ -45,9 +45,6 @@ "ramdisk_addr_r=0xD0438000\0" \ BOOTENV -/* - * Command line configuration. - */ #define CONFIG_BOARD_LATE_INIT #endif /* __CONFIG_H */ diff --git a/include/configs/stm32h743-eval.h b/include/configs/stm32h743-eval.h index 8eb94c1..cbbe925 100644 --- a/include/configs/stm32h743-eval.h +++ b/include/configs/stm32h743-eval.h @@ -45,9 +45,6 @@ "ramdisk_addr_r=0xD0438000\0" \ BOOTENV -/* - * Command line configuration. - */ #define CONFIG_BOARD_LATE_INIT #endif /* __CONFIG_H */ diff --git a/include/configs/strider.h b/include/configs/strider.h index 4ad3401..f860865 100644 --- a/include/configs/strider.h +++ b/include/configs/strider.h @@ -388,10 +388,6 @@ void fpga_control_clear(unsigned int bus, int pin); #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ /* - * Command line configuration. - */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 976d527..3da7ee7 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -212,10 +212,6 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ /* - * Command line configuration. - */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ diff --git a/include/configs/tb100.h b/include/configs/tb100.h index ae54520..f42b0df 100644 --- a/include/configs/tb100.h +++ b/include/configs/tb100.h @@ -48,10 +48,6 @@ #define ETH1_BASE_ADDRESS 0xFE110000 /* - * Command line configuration - */ - -/* * Environment configuration */ #define CONFIG_BOOTFILE "uImage" diff --git a/include/configs/theadorable-x86-common.h b/include/configs/theadorable-x86-common.h index 0a1261f..141d4d6 100644 --- a/include/configs/theadorable-x86-common.h +++ b/include/configs/theadorable-x86-common.h @@ -19,7 +19,6 @@ #define VIDEO_IO_OFFSET 0 #define CONFIG_X86EMU_RAW_IO -#define CONFIG_CMD_BMP #define CONFIG_BMP_16BPP /* Environment settings */ diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h index 6d42ec1..0e5bd0d 100644 --- a/include/configs/theadorable.h +++ b/include/configs/theadorable.h @@ -18,10 +18,6 @@ #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ /* - * Commands configuration - */ - -/* * The debugging version enables USB support via defconfig. * This version should also enable all other non-production * interfaces / features. diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 1d3b2a3..d16d61e 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -28,8 +28,6 @@ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#define CONFIG_CMD_ASKENV - #define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2048MB */ #define CONFIG_SYS_SDRAM_BASE 0x80000000 diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h index a2dcd1a..6e39538 100644 --- a/include/configs/topic_miami.h +++ b/include/configs/topic_miami.h @@ -22,9 +22,6 @@ #define CONFIG_SPL_MAX_FOOTPRINT CONFIG_SYS_SPI_U_BOOT_OFFS #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -/* sspi command isn't useful */ -#undef CONFIG_CMD_SPI - /* No falcon support */ #undef CONFIG_SPL_OS_BOOT #undef CONFIG_SPL_FPGA_SUPPORT diff --git a/include/configs/tplink_wdr4300.h b/include/configs/tplink_wdr4300.h index 75e7458..f25f6dc 100644 --- a/include/configs/tplink_wdr4300.h +++ b/include/configs/tplink_wdr4300.h @@ -52,6 +52,4 @@ * Diagnostics */ -#define CONFIG_CMD_MII - #endif /* __CONFIG_H */ diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index 81b171e..91249f2 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -205,10 +205,6 @@ #define CONFIG_BOOTP_BOOTFILESIZE /* - * Command line configuration. - */ - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index c11507e..3f57872 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -208,9 +208,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Command line configuration. - */ #define CONFIG_SYS_RTC_BUS_NUM 0x01 #define CONFIG_SYS_I2C_RTC_ADDR 0x32 diff --git a/include/configs/vyasa-rk3288.h b/include/configs/vyasa-rk3288.h index c3521ca..4d8b4a0 100644 --- a/include/configs/vyasa-rk3288.h +++ b/include/configs/vyasa-rk3288.h @@ -29,9 +29,7 @@ /* Falcon Mode */ #define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_CMD_SPL #define CONFIG_SYS_SPL_ARGS_ADDR 0x0ffe5000 -#define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K) /* Falcon Mode - MMC support: args@16MB kernel@17MB */ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x8000 /* 16MB */ diff --git a/include/configs/x530.h b/include/configs/x530.h index 99531ed..7e0f2c2 100644 --- a/include/configs/x530.h +++ b/include/configs/x530.h @@ -32,11 +32,6 @@ #define CONFIG_CONS_INDEX 1 /*Console on UART0 */ -/* - * Commands configuration - */ -#define CONFIG_CMD_PCI - /* NAND */ #define CONFIG_SYS_NAND_ONFI_DETECTION #define CONFIG_SYS_MAX_NAND_DEVICE 1 @@ -69,9 +64,6 @@ /* NAND */ #define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS -#define CONFIG_CMD_MTDPARTS #define CONFIG_SYS_MALLOC_LEN (4 << 20) diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index ff45714..bd62798 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -41,10 +41,6 @@ */ #define CONFIG_SYS_NS16550_PORT_MAPPED -/*----------------------------------------------------------------------- - * Command line configuration. - */ - #ifndef CONFIG_BOOTCOMMAND #define CONFIG_BOOTCOMMAND \ "ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" diff --git a/include/configs/xilinx_versal_mini.h b/include/configs/xilinx_versal_mini.h index a1a98f9..0b201a2 100644 --- a/include/configs/xilinx_versal_mini.h +++ b/include/configs/xilinx_versal_mini.h @@ -17,7 +17,6 @@ /* Undef unneeded configs */ #undef CONFIG_EXTRA_ENV_SETTINGS -#undef CONFIG_CMD_ENV /* BOOTP options */ #undef CONFIG_BOOTP_BOOTFILESIZE diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 6cde7e8..e868c13 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -244,7 +244,6 @@ #endif #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU) -# undef CONFIG_CMD_BOOTD # define CONFIG_SPL_ENV_SUPPORT # define CONFIG_SPL_HASH_SUPPORT # define CONFIG_ENV_MAX_ENTRIES 10 diff --git a/include/configs/xilinx_zynqmp_mini.h b/include/configs/xilinx_zynqmp_mini.h index ccc9382..ae751aa 100644 --- a/include/configs/xilinx_zynqmp_mini.h +++ b/include/configs/xilinx_zynqmp_mini.h @@ -19,7 +19,6 @@ #undef CONFIG_BOOTCOMMAND #undef CONFIG_EXTRA_ENV_SETTINGS #undef CONFIG_SYS_MALLOC_LEN -#undef CONFIG_CMD_ENV #undef CONFIG_SYS_INIT_SP_ADDR /* BOOTP options */ diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index e76c5cb..15bd97f 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -52,14 +52,6 @@ #define CONFIG_BOOTP_BOOTFILESIZE /* - * Command line configuration. - */ - -/* - * Additional command - */ - -/* * USB */ #ifdef CONFIG_CMD_USB -- cgit v1.1