From 8e585f02f82c17cc66cd229dbf0fd3066bbbf658 Mon Sep 17 00:00:00 2001 From: TsiChung Liew Date: Mon, 18 Jun 2007 13:50:13 -0500 Subject: Added M5329AFEE and M5329BFEE Platforms Added board/freescale/m5329evb, cpu/mcf532x, drivers/net, drivers/serial, immap_5329.h, m5329.h, mcfrtc.h, include/configs/M5329EVB.h, lib_m68k/interrupts.c, and rtc/mcfrtc.c Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c, common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h, include/asm-m68k/io.h, include/asm-m68k/mcftimer.h, include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h, include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c, lib_m68k/time.c, net/eth.c and rtc/Makefile Signed-off-by: TsiChung Liew --- drivers/net/Makefile | 45 ++++ drivers/net/mcffec.c | 594 +++++++++++++++++++++++++++++++++++++++++++++ drivers/serial/Makefile | 45 ++++ drivers/serial/mcfserial.c | 126 ++++++++++ 4 files changed, 810 insertions(+) create mode 100644 drivers/net/Makefile create mode 100644 drivers/net/mcffec.c create mode 100644 drivers/serial/Makefile create mode 100644 drivers/serial/mcfserial.c (limited to 'drivers') diff --git a/drivers/net/Makefile b/drivers/net/Makefile new file mode 100644 index 0000000..37d69b9 --- /dev/null +++ b/drivers/net/Makefile @@ -0,0 +1,45 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)libnet.a + +COBJS := mcffec.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c new file mode 100644 index 0000000..d1c84ca --- /dev/null +++ b/drivers/net/mcffec.c @@ -0,0 +1,594 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2007 + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#ifdef CONFIG_MCFFEC +#undef ET_DEBUG +#undef MII_DEBUG + +/* Ethernet Transmit and Receive Buffers */ +#define DBUF_LENGTH 1520 + +#define TX_BUF_CNT 2 + +/* + NOTE: PKT_MAXBUF_SIZE must be larger or equal to PKT_MAXBLR_SIZE, + see M54455 User Manual for MAX_FL of Receive Control Register for more + description. If PKT_MAXBUF_SIZE set to 1518, the FEC bandwidth will + reduce to about 20~40% of normal bandwidth. Changing PKT_MAXBLR_SIZE + will not make any improvement on speed +*/ +#define PKT_MAXBUF_SIZE 1518 +#define PKT_MINBUF_SIZE 64 +#define PKT_MAXBLR_SIZE 1520 +#define LAST_PKTBUFSRX PKTBUFSRX - 1 +#define BD_ENET_RX_W_E (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY) +#define BD_ENET_TX_RDY_LST (BD_ENET_TX_READY | BD_ENET_TX_LAST) + +DECLARE_GLOBAL_DATA_PTR; + +#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) + +struct fec_info_s fec_info[] = { +#ifdef CFG_FEC0_IOBASE + { + 0, /* index */ + CFG_FEC0_IOBASE, /* io base */ + CFG_FEC0_PINMUX, /* gpio pin muxing */ + CFG_FEC0_MIIBASE, /* mii base */ + -1, /* phy_addr */ + 0, /* duplex and speed */ + 0, /* phy name */ + 0, /* phyname init */ + 0, /* RX BD */ + 0, /* TX BD */ + 0, /* rx Index */ + 0, /* tx Index */ + 0, /* tx buffer */ + 0, /* initialized flag */ + }, +#endif +#ifdef CFG_FEC1_IOBASE + { + 1, /* index */ + CFG_FEC1_IOBASE, /* io base */ + CFG_FEC1_PINMUX, /* gpio pin muxing */ + CFG_FEC1_MIIBASE, /* mii base */ + -1, /* phy_addr */ + 0, /* duplex and speed */ + 0, /* phy name */ + 0, /* phy name init */ + 0, /* RX BD */ + 0, /* TX BD */ + 0, /* rx Index */ + 0, /* tx Index */ + 0, /* tx buffer */ + 0, /* initialized flag */ + } +#endif +}; + +/* + * FEC Ethernet Tx and Rx buffer descriptors allocated at the + * immr->udata_bd address on Dual-Port RAM + * Provide for Double Buffering + */ + +int fec_send(struct eth_device *dev, volatile void *packet, int length); +int fec_recv(struct eth_device *dev); +int fec_init(struct eth_device *dev, bd_t * bd); +void fec_halt(struct eth_device *dev); +void fec_reset(struct eth_device *dev); + +extern int fecpin_setclear(struct eth_device *dev, int setclear); + +#ifdef CFG_DISCOVER_PHY +extern void mii_init(void); +extern uint mii_send(uint mii_cmd); +extern int mii_discover_phy(struct eth_device *dev); +extern int mcffec_miiphy_read(char *devname, unsigned char addr, + unsigned char reg, unsigned short *value); +extern int mcffec_miiphy_write(char *devname, unsigned char addr, + unsigned char reg, unsigned short value); +#endif + +void setFecDuplexSpeed(volatile fec_t * fecp, bd_t * bd, int dup_spd) +{ + if ((dup_spd >> 16) == FULL) { + /* Set maximum frame length */ + fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | FEC_RCR_MII_MODE | + FEC_RCR_PROM | 0x100; + fecp->tcr = FEC_TCR_FDEN; + } else { + /* Half duplex mode */ + fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | + FEC_RCR_MII_MODE | FEC_RCR_DRT; + fecp->tcr &= ~FEC_TCR_FDEN; + } + + if ((dup_spd & 0xFFFF) == _100BASET) { +#ifdef MII_DEBUG + printf("100Mbps\n"); +#endif + bd->bi_ethspeed = 100; + } else { +#ifdef MII_DEBUG + printf("10Mbps\n"); +#endif + bd->bi_ethspeed = 10; + } +} + +int fec_send(struct eth_device *dev, volatile void *packet, int length) +{ + struct fec_info_s *info = dev->priv; + volatile fec_t *fecp = (fec_t *) (info->iobase); + int j, rc; + u16 phyStatus; + + miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &phyStatus); + + /* section 16.9.23.3 + * Wait for ready + */ + j = 0; + while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) && + (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("TX not ready\n"); + } + + info->txbd[info->txIdx].cbd_bufaddr = (uint) packet; + info->txbd[info->txIdx].cbd_datlen = length; + info->txbd[info->txIdx].cbd_sc |= BD_ENET_TX_RDY_LST; + + /* Activate transmit Buffer Descriptor polling */ + fecp->tdar = 0x01000000; /* Descriptor polling active */ + + j = 0; + while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) && + (j < MCFFEC_TOUT_LOOP)) { + udelay(1); + j++; + } + if (j >= MCFFEC_TOUT_LOOP) { + printf("TX timeout\n"); + } +#ifdef ET_DEBUG + printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n", + __FILE__, __LINE__, __FUNCTION__, j, + info->txbd[info->txIdx].cbd_sc, + (info->txbd[info->txIdx].cbd_sc & 0x003C) >> 2); +#endif + + /* return only status bits */ ; + rc = (info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_STATS); + info->txIdx = (info->txIdx + 1) % TX_BUF_CNT; + + return rc; +} + +int fec_recv(struct eth_device *dev) +{ + struct fec_info_s *info = dev->priv; + volatile fec_t *fecp = (fec_t *) (info->iobase); + int length; + + for (;;) { + /* section 16.9.23.2 */ + if (info->rxbd[info->rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { + length = -1; + break; /* nothing received - leave for() loop */ + } + + length = info->rxbd[info->rxIdx].cbd_datlen; + + if (info->rxbd[info->rxIdx].cbd_sc & 0x003f) { + printf("%s[%d] err: %x\n", + __FUNCTION__, __LINE__, + info->rxbd[info->rxIdx].cbd_sc); +#ifdef ET_DEBUG + printf("%s[%d] err: %x\n", + __FUNCTION__, __LINE__, + info->rxbd[info->rxIdx].cbd_sc); +#endif + } else { + + length -= 4; + /* Pass the packet up to the protocol layers. */ + NetReceive(NetRxPackets[info->rxIdx], length); + + fecp->eir |= FEC_EIR_RXF; + } + + /* Give the buffer back to the FEC. */ + info->rxbd[info->rxIdx].cbd_datlen = 0; + + /* wrap around buffer index when necessary */ + if (info->rxIdx == LAST_PKTBUFSRX) { + info->rxbd[PKTBUFSRX - 1].cbd_sc = BD_ENET_RX_W_E; + info->rxIdx = 0; + } else { + info->rxbd[info->rxIdx].cbd_sc = BD_ENET_RX_EMPTY; + info->rxIdx++; + } + + /* Try to fill Buffer Descriptors */ + fecp->rdar = 0x01000000; /* Descriptor polling active */ + } + + return length; +} + +/************************************************************** + * + * FEC Ethernet Initialization Routine + * + *************************************************************/ + +#ifdef ET_DEBUG +void dbgFecRegs(struct eth_device *dev) +{ + struct fec_info_s *info = dev->priv; + volatile fec_t *fecp = (fec_t *) (info->iobase); + + printf("=====\n"); + printf("ievent %x - %x\n", (int)&fecp->eir, fecp->eir); + printf("imask %x - %x\n", (int)&fecp->eimr, fecp->eimr); + printf("r_des_active %x - %x\n", (int)&fecp->rdar, fecp->rdar); + printf("x_des_active %x - %x\n", (int)&fecp->tdar, fecp->tdar); + printf("ecntrl %x - %x\n", (int)&fecp->ecr, fecp->ecr); + printf("mii_mframe %x - %x\n", (int)&fecp->mmfr, fecp->mmfr); + printf("mii_speed %x - %x\n", (int)&fecp->mscr, fecp->mscr); + printf("mii_ctrlstat %x - %x\n", (int)&fecp->mibc, fecp->mibc); + printf("r_cntrl %x - %x\n", (int)&fecp->rcr, fecp->rcr); + printf("x_cntrl %x - %x\n", (int)&fecp->tcr, fecp->tcr); + printf("padr_l %x - %x\n", (int)&fecp->palr, fecp->palr); + printf("padr_u %x - %x\n", (int)&fecp->paur, fecp->paur); + printf("op_pause %x - %x\n", (int)&fecp->opd, fecp->opd); + printf("iadr_u %x - %x\n", (int)&fecp->iaur, fecp->iaur); + printf("iadr_l %x - %x\n", (int)&fecp->ialr, fecp->ialr); + printf("gadr_u %x - %x\n", (int)&fecp->gaur, fecp->gaur); + printf("gadr_l %x - %x\n", (int)&fecp->galr, fecp->galr); + printf("x_wmrk %x - %x\n", (int)&fecp->tfwr, fecp->tfwr); + printf("r_bound %x - %x\n", (int)&fecp->frbr, fecp->frbr); + printf("r_fstart %x - %x\n", (int)&fecp->frsr, fecp->frsr); + printf("r_drng %x - %x\n", (int)&fecp->erdsr, fecp->erdsr); + printf("x_drng %x - %x\n", (int)&fecp->etdsr, fecp->etdsr); + printf("r_bufsz %x - %x\n", (int)&fecp->emrbr, fecp->emrbr); + + printf("\n"); + printf("rmon_t_drop %x - %x\n", (int)&fecp->rmon_t_drop, + fecp->rmon_t_drop); + printf("rmon_t_packets %x - %x\n", (int)&fecp->rmon_t_packets, + fecp->rmon_t_packets); + printf("rmon_t_bc_pkt %x - %x\n", (int)&fecp->rmon_t_bc_pkt, + fecp->rmon_t_bc_pkt); + printf("rmon_t_mc_pkt %x - %x\n", (int)&fecp->rmon_t_mc_pkt, + fecp->rmon_t_mc_pkt); + printf("rmon_t_crc_align %x - %x\n", (int)&fecp->rmon_t_crc_align, + fecp->rmon_t_crc_align); + printf("rmon_t_undersize %x - %x\n", (int)&fecp->rmon_t_undersize, + fecp->rmon_t_undersize); + printf("rmon_t_oversize %x - %x\n", (int)&fecp->rmon_t_oversize, + fecp->rmon_t_oversize); + printf("rmon_t_frag %x - %x\n", (int)&fecp->rmon_t_frag, + fecp->rmon_t_frag); + printf("rmon_t_jab %x - %x\n", (int)&fecp->rmon_t_jab, + fecp->rmon_t_jab); + printf("rmon_t_col %x - %x\n", (int)&fecp->rmon_t_col, + fecp->rmon_t_col); + printf("rmon_t_p64 %x - %x\n", (int)&fecp->rmon_t_p64, + fecp->rmon_t_p64); + printf("rmon_t_p65to127 %x - %x\n", (int)&fecp->rmon_t_p65to127, + fecp->rmon_t_p65to127); + printf("rmon_t_p128to255 %x - %x\n", (int)&fecp->rmon_t_p128to255, + fecp->rmon_t_p128to255); + printf("rmon_t_p256to511 %x - %x\n", (int)&fecp->rmon_t_p256to511, + fecp->rmon_t_p256to511); + printf("rmon_t_p512to1023 %x - %x\n", (int)&fecp->rmon_t_p512to1023, + fecp->rmon_t_p512to1023); + printf("rmon_t_p1024to2047 %x - %x\n", (int)&fecp->rmon_t_p1024to2047, + fecp->rmon_t_p1024to2047); + printf("rmon_t_p_gte2048 %x - %x\n", (int)&fecp->rmon_t_p_gte2048, + fecp->rmon_t_p_gte2048); + printf("rmon_t_octets %x - %x\n", (int)&fecp->rmon_t_octets, + fecp->rmon_t_octets); + + printf("\n"); + printf("ieee_t_drop %x - %x\n", (int)&fecp->ieee_t_drop, + fecp->ieee_t_drop); + printf("ieee_t_frame_ok %x - %x\n", (int)&fecp->ieee_t_frame_ok, + fecp->ieee_t_frame_ok); + printf("ieee_t_1col %x - %x\n", (int)&fecp->ieee_t_1col, + fecp->ieee_t_1col); + printf("ieee_t_mcol %x - %x\n", (int)&fecp->ieee_t_mcol, + fecp->ieee_t_mcol); + printf("ieee_t_def %x - %x\n", (int)&fecp->ieee_t_def, + fecp->ieee_t_def); + printf("ieee_t_lcol %x - %x\n", (int)&fecp->ieee_t_lcol, + fecp->ieee_t_lcol); + printf("ieee_t_excol %x - %x\n", (int)&fecp->ieee_t_excol, + fecp->ieee_t_excol); + printf("ieee_t_macerr %x - %x\n", (int)&fecp->ieee_t_macerr, + fecp->ieee_t_macerr); + printf("ieee_t_cserr %x - %x\n", (int)&fecp->ieee_t_cserr, + fecp->ieee_t_cserr); + printf("ieee_t_sqe %x - %x\n", (int)&fecp->ieee_t_sqe, + fecp->ieee_t_sqe); + printf("ieee_t_fdxfc %x - %x\n", (int)&fecp->ieee_t_fdxfc, + fecp->ieee_t_fdxfc); + printf("ieee_t_octets_ok %x - %x\n", (int)&fecp->ieee_t_octets_ok, + fecp->ieee_t_octets_ok); + + printf("\n"); + printf("rmon_r_drop %x - %x\n", (int)&fecp->rmon_r_drop, + fecp->rmon_r_drop); + printf("rmon_r_packets %x - %x\n", (int)&fecp->rmon_r_packets, + fecp->rmon_r_packets); + printf("rmon_r_bc_pkt %x - %x\n", (int)&fecp->rmon_r_bc_pkt, + fecp->rmon_r_bc_pkt); + printf("rmon_r_mc_pkt %x - %x\n", (int)&fecp->rmon_r_mc_pkt, + fecp->rmon_r_mc_pkt); + printf("rmon_r_crc_align %x - %x\n", (int)&fecp->rmon_r_crc_align, + fecp->rmon_r_crc_align); + printf("rmon_r_undersize %x - %x\n", (int)&fecp->rmon_r_undersize, + fecp->rmon_r_undersize); + printf("rmon_r_oversize %x - %x\n", (int)&fecp->rmon_r_oversize, + fecp->rmon_r_oversize); + printf("rmon_r_frag %x - %x\n", (int)&fecp->rmon_r_frag, + fecp->rmon_r_frag); + printf("rmon_r_jab %x - %x\n", (int)&fecp->rmon_r_jab, + fecp->rmon_r_jab); + printf("rmon_r_p64 %x - %x\n", (int)&fecp->rmon_r_p64, + fecp->rmon_r_p64); + printf("rmon_r_p65to127 %x - %x\n", (int)&fecp->rmon_r_p65to127, + fecp->rmon_r_p65to127); + printf("rmon_r_p128to255 %x - %x\n", (int)&fecp->rmon_r_p128to255, + fecp->rmon_r_p128to255); + printf("rmon_r_p256to511 %x - %x\n", (int)&fecp->rmon_r_p256to511, + fecp->rmon_r_p256to511); + printf("rmon_r_p512to1023 %x - %x\n", (int)&fecp->rmon_r_p512to1023, + fecp->rmon_r_p512to1023); + printf("rmon_r_p1024to2047 %x - %x\n", (int)&fecp->rmon_r_p1024to2047, + fecp->rmon_r_p1024to2047); + printf("rmon_r_p_gte2048 %x - %x\n", (int)&fecp->rmon_r_p_gte2048, + fecp->rmon_r_p_gte2048); + printf("rmon_r_octets %x - %x\n", (int)&fecp->rmon_r_octets, + fecp->rmon_r_octets); + + printf("\n"); + printf("ieee_r_drop %x - %x\n", (int)&fecp->ieee_r_drop, + fecp->ieee_r_drop); + printf("ieee_r_frame_ok %x - %x\n", (int)&fecp->ieee_r_frame_ok, + fecp->ieee_r_frame_ok); + printf("ieee_r_crc %x - %x\n", (int)&fecp->ieee_r_crc, + fecp->ieee_r_crc); + printf("ieee_r_align %x - %x\n", (int)&fecp->ieee_r_align, + fecp->ieee_r_align); + printf("ieee_r_macerr %x - %x\n", (int)&fecp->ieee_r_macerr, + fecp->ieee_r_macerr); + printf("ieee_r_fdxfc %x - %x\n", (int)&fecp->ieee_r_fdxfc, + fecp->ieee_r_fdxfc); + printf("ieee_r_octets_ok %x - %x\n", (int)&fecp->ieee_r_octets_ok, + fecp->ieee_r_octets_ok); + + printf("\n\n\n"); +} +#endif + +int fec_init(struct eth_device *dev, bd_t * bd) +{ + struct fec_info_s *info = dev->priv; + volatile fec_t *fecp = (fec_t *) (info->iobase); + int i; + u8 *ea; + + fecpin_setclear(dev, 1); + + fec_reset(dev); + +#if (CONFIG_COMMANDS & CFG_CMD_MII) || defined (CONFIG_MII) || \ + defined (CFG_DISCOVER_PHY) + + mii_init(); + + setFecDuplexSpeed(fecp, bd, info->dup_spd); +#else +#ifndef CFG_DISCOVER_PHY + setFecDuplexSpeed(fecp, bd, (FECDUPLEX << 16) | FECSPEED); +#endif /* ifndef CFG_DISCOVER_PHY */ +#endif /* CFG_CMD_MII || CONFIG_MII */ + + /* We use strictly polling mode only */ + fecp->eimr = 0; + + /* Clear any pending interrupt */ + fecp->eir = 0xffffffff; + + /* Set station address */ + if ((u32) fecp == CFG_FEC0_IOBASE) { + ea = &bd->bi_enetaddr[0]; + } else { +#ifdef CFG_FEC1_IOBASE + ea = &bd->bi_enet1addr[0]; +#endif + } + + fecp->palr = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp->paur = (ea[4] << 24) | (ea[5] << 16); +#ifdef ET_DEBUG + printf("Eth Addrs: %02x:%02x:%02x:%02x:%02x:%02x\n", + ea[0], ea[1], ea[2], ea[3], ea[4], ea[5]); +#endif + + /* Clear unicast address hash table */ + fecp->iaur = 0; + fecp->ialr = 0; + + /* Clear multicast address hash table */ + fecp->gaur = 0; + fecp->galr = 0; + + /* Set maximum receive buffer size. */ + fecp->emrbr = PKT_MAXBLR_SIZE; + + /* + * Setup Buffers and Buffer Desriptors + */ + info->rxIdx = 0; + info->txIdx = 0; + + /* + * Setup Receiver Buffer Descriptors (13.14.24.18) + * Settings: + * Empty, Wrap + */ + for (i = 0; i < PKTBUFSRX; i++) { + info->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; + info->rxbd[i].cbd_datlen = 0; /* Reset */ + info->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i]; + } + info->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; + + /* + * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19) + * Settings: + * Last, Tx CRC + */ + for (i = 0; i < TX_BUF_CNT; i++) { + info->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC; + info->txbd[i].cbd_datlen = 0; /* Reset */ + info->txbd[i].cbd_bufaddr = (uint) (&info->txbuf[0]); + } + info->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP; + + /* Set receive and transmit descriptor base */ + fecp->erdsr = (unsigned int)(&info->rxbd[0]); + fecp->etdsr = (unsigned int)(&info->txbd[0]); + + /* Now enable the transmit and receive processing */ + fecp->ecr |= FEC_ECR_ETHER_EN; + + /* And last, try to fill Rx Buffer Descriptors */ + fecp->rdar = 0x01000000; /* Descriptor polling active */ + + return 1; +} + +void fec_reset(struct eth_device *dev) +{ + struct fec_info_s *info = dev->priv; + volatile fec_t *fecp = (fec_t *) (info->iobase); + int i; + + fecp->ecr = FEC_ECR_RESET; + for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) { + udelay(1); + } + if (i == FEC_RESET_DELAY) { + printf("FEC_RESET_DELAY timeout\n"); + } +} + +void fec_halt(struct eth_device *dev) +{ + struct fec_info_s *info = dev->priv; + + fec_reset(dev); + + fecpin_setclear(dev, 0); + + info->rxIdx = info->txIdx = 0; + memset(info->rxbd, 0, PKTBUFSRX * sizeof(cbd_t)); + memset(info->txbd, 0, TX_BUF_CNT * sizeof(cbd_t)); + memset(info->txbuf, 0, DBUF_LENGTH); +} + +int mcffec_initialize(bd_t * bis) +{ + struct eth_device *dev; + int i; + + for (i = 0; i < sizeof(fec_info) / sizeof(fec_info[0]); i++) { + + dev = (struct eth_device *)malloc(sizeof *dev); + if (dev == NULL) + hang(); + + memset(dev, 0, sizeof(*dev)); + + sprintf(dev->name, "FEC%d", fec_info[i].index); + + dev->priv = &fec_info[i]; + dev->init = fec_init; + dev->halt = fec_halt; + dev->send = fec_send; + dev->recv = fec_recv; + + /* setup Receive and Transmit buffer descriptor */ + fec_info[i].rxbd = + (cbd_t *) memalign(32, (PKTBUFSRX * sizeof(cbd_t) + 31)); + fec_info[i].txbd = + (cbd_t *) memalign(32, (TX_BUF_CNT * sizeof(cbd_t) + 31)); + fec_info[i].txbuf = (char *)memalign(32, DBUF_LENGTH + 31); +#ifdef ET_DEBUG + printf("rxbd %x txbd %x\n", + (int)fec_info[i].rxbd, (int)fec_info[i].txbd); +#endif + + fec_info[i].phy_name = (char *)malloc(32); + + eth_register(dev); + +#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) + miiphy_register(dev->name, + mcffec_miiphy_read, mcffec_miiphy_write); +#endif + } + + /* default speed */ + bis->bi_ethspeed = 10; + + return 1; +} + +#endif /* CFG_CMD_NET, FEC_ENET & NET_MULTI */ +#endif /* CONFIG_MCFFEC */ diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile new file mode 100644 index 0000000..2208a08 --- /dev/null +++ b/drivers/serial/Makefile @@ -0,0 +1,45 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)libserial.a + +COBJS := mcfserial.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c new file mode 100644 index 0000000..a8ca78a --- /dev/null +++ b/drivers/serial/mcfserial.c @@ -0,0 +1,126 @@ +/* + * (C) Copyright 2004, Freescale, Inc + * TsiChung Liew, Tsi-Chung.Liew@freescale.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/* + * Minimal serial functions needed to use one of the uart ports + * as serial console interface. + */ + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_MCFSERIAL +int serial_init(void) +{ + volatile uart_t *uart; + u32 counter; + + uart = (volatile uart_t *)(CFG_UART_BASE); + + /* write to SICR: SIM2 = uart mode,dcd does not affect rx */ + uart->ucr = UART_UCR_RESET_RX; + uart->ucr = UART_UCR_RESET_TX; + uart->ucr = UART_UCR_RESET_ERROR; + uart->ucr = UART_UCR_RESET_MR; + __asm__("nop"); + + uart->uimr = 0; + + /* write to CSR: RX/TX baud rate from timers */ + uart->ucsr = (UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK); + + uart->umr = (UART_UMR_BC_8 | UART_UMR_PM_NONE); + uart->umr = UART_UMR_SB_STOP_BITS_1; + + /* Setting up BaudRate */ + counter = (u32) (gd->bus_clk / (gd->baudrate)); + counter >>= 5; + + /* write to CTUR: divide counter upper byte */ + uart->ubg1 = (u8) ((counter & 0xff00) >> 8); + /* write to CTLR: divide counter lower byte */ + uart->ubg2 = (u8) (counter & 0x00ff); + + uart->ucr = (UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED); + + return (0); +} + +void serial_putc(const char c) +{ + volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); + + if (c == '\n') + serial_putc('\r'); + + /* Wait for last character to go. */ + while (!(uart->usr & UART_USR_TXRDY)) ; + + uart->utb = c; +} + +void serial_puts(const char *s) +{ + while (*s) { + serial_putc(*s++); + } +} + +int serial_getc(void) +{ + volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); + + /* Wait for a character to arrive. */ + while (!(uart->usr & UART_USR_RXRDY)) ; + return uart->urb; +} + +int serial_tstc(void) +{ + volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); + + return (uart->usr & UART_USR_RXRDY); +} + +void serial_setbrg(void) +{ + volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); + u32 counter; + + counter = ((gd->bus_clk / gd->baudrate)) >> 5; + counter++; + + /* write to CTUR: divide counter upper byte */ + uart->ubg1 = ((counter & 0xff00) >> 8); + /* write to CTLR: divide counter lower byte */ + uart->ubg2 = (counter & 0x00ff); + + uart->ucr = UART_UCR_RESET_RX; + uart->ucr = UART_UCR_RESET_TX; + + uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED; +} +#endif /* CONFIG_MCFSERIAL */ -- cgit v1.1 From f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 23:13:58 -0500 Subject: Header file update, clean up and cache handling Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid. Signed-off-by: TsiChungLiew --- drivers/net/mcffec.c | 66 ++++++++++++++++++++++++++-------------------------- 1 file changed, 33 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index d1c84ca..609210d 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * (C) Copyright 2007 + * (C) Copyright 2007 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -28,8 +28,7 @@ #include #include -#include -#include +#include #include #include @@ -41,17 +40,8 @@ #undef MII_DEBUG /* Ethernet Transmit and Receive Buffers */ -#define DBUF_LENGTH 1520 - -#define TX_BUF_CNT 2 - -/* - NOTE: PKT_MAXBUF_SIZE must be larger or equal to PKT_MAXBLR_SIZE, - see M54455 User Manual for MAX_FL of Receive Control Register for more - description. If PKT_MAXBUF_SIZE set to 1518, the FEC bandwidth will - reduce to about 20~40% of normal bandwidth. Changing PKT_MAXBLR_SIZE - will not make any improvement on speed -*/ +#define DBUF_LENGTH 1520 +#define TX_BUF_CNT 2 #define PKT_MAXBUF_SIZE 1518 #define PKT_MINBUF_SIZE 64 #define PKT_MAXBLR_SIZE 1520 @@ -102,12 +92,6 @@ struct fec_info_s fec_info[] = { #endif }; -/* - * FEC Ethernet Tx and Rx buffer descriptors allocated at the - * immr->udata_bd address on Dual-Port RAM - * Provide for Double Buffering - */ - int fec_send(struct eth_device *dev, volatile void *packet, int length); int fec_recv(struct eth_device *dev); int fec_init(struct eth_device *dev, bd_t * bd); @@ -166,15 +150,23 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length) * Wait for ready */ j = 0; +#if (CONFIG_COMMANDS & CFG_CMD_CACHE) + icache_invalid(); +#endif while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) && (j < MCFFEC_TOUT_LOOP)) { udelay(1); j++; +#if (CONFIG_COMMANDS & CFG_CMD_CACHE) + icache_invalid(); +#endif } if (j >= MCFFEC_TOUT_LOOP) { printf("TX not ready\n"); } - +#if (CONFIG_COMMANDS & CFG_CMD_CACHE) + icache_invalid(); +#endif info->txbd[info->txIdx].cbd_bufaddr = (uint) packet; info->txbd[info->txIdx].cbd_datlen = length; info->txbd[info->txIdx].cbd_sc |= BD_ENET_TX_RDY_LST; @@ -183,10 +175,16 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length) fecp->tdar = 0x01000000; /* Descriptor polling active */ j = 0; +#if (CONFIG_COMMANDS & CFG_CMD_CACHE) + icache_invalid(); +#endif while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) && (j < MCFFEC_TOUT_LOOP)) { udelay(1); j++; +#if (CONFIG_COMMANDS & CFG_CMD_CACHE) + icache_invalid(); +#endif } if (j >= MCFFEC_TOUT_LOOP) { printf("TX timeout\n"); @@ -199,6 +197,9 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length) #endif /* return only status bits */ ; +#if (CONFIG_COMMANDS & CFG_CMD_CACHE) + icache_invalid(); +#endif rc = (info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_STATS); info->txIdx = (info->txIdx + 1) % TX_BUF_CNT; @@ -257,12 +258,6 @@ int fec_recv(struct eth_device *dev) return length; } -/************************************************************** - * - * FEC Ethernet Initialization Routine - * - *************************************************************/ - #ifdef ET_DEBUG void dbgFecRegs(struct eth_device *dev) { @@ -419,7 +414,7 @@ int fec_init(struct eth_device *dev, bd_t * bd) struct fec_info_s *info = dev->priv; volatile fec_t *fecp = (fec_t *) (info->iobase); int i; - u8 *ea; + u8 *ea = NULL; fecpin_setclear(dev, 1); @@ -549,7 +544,9 @@ int mcffec_initialize(bd_t * bis) for (i = 0; i < sizeof(fec_info) / sizeof(fec_info[0]); i++) { - dev = (struct eth_device *)malloc(sizeof *dev); + dev = + (struct eth_device *)memalign(CFG_CACHELINE_SIZE, + sizeof *dev); if (dev == NULL) hang(); @@ -565,16 +562,19 @@ int mcffec_initialize(bd_t * bis) /* setup Receive and Transmit buffer descriptor */ fec_info[i].rxbd = - (cbd_t *) memalign(32, (PKTBUFSRX * sizeof(cbd_t) + 31)); + (cbd_t *) memalign(CFG_CACHELINE_SIZE, + (PKTBUFSRX * sizeof(cbd_t))); fec_info[i].txbd = - (cbd_t *) memalign(32, (TX_BUF_CNT * sizeof(cbd_t) + 31)); - fec_info[i].txbuf = (char *)memalign(32, DBUF_LENGTH + 31); + (cbd_t *) memalign(CFG_CACHELINE_SIZE, + (TX_BUF_CNT * sizeof(cbd_t))); + fec_info[i].txbuf = + (char *)memalign(CFG_CACHELINE_SIZE, DBUF_LENGTH); #ifdef ET_DEBUG printf("rxbd %x txbd %x\n", (int)fec_info[i].rxbd, (int)fec_info[i].txbd); #endif - fec_info[i].phy_name = (char *)malloc(32); + fec_info[i].phy_name = (char *)memalign(CFG_CACHELINE_SIZE, 32); eth_register(dev); -- cgit v1.1 From 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 5 Jul 2007 23:17:36 -0500 Subject: Rename mcfserial.c. Update include header Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h Signed-off-by: TsiChungLiew --- drivers/serial/Makefile | 2 +- drivers/serial/mcfserial.c | 126 -------------------------------------------- drivers/serial/mcfuart.c | 127 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 128 insertions(+), 127 deletions(-) delete mode 100644 drivers/serial/mcfserial.c create mode 100644 drivers/serial/mcfuart.c (limited to 'drivers') diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 2208a08..93c68dd 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB := $(obj)libserial.a -COBJS := mcfserial.o +COBJS := mcfuart.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c deleted file mode 100644 index a8ca78a..0000000 --- a/drivers/serial/mcfserial.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * (C) Copyright 2004, Freescale, Inc - * TsiChung Liew, Tsi-Chung.Liew@freescale.com. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -/* - * Minimal serial functions needed to use one of the uart ports - * as serial console interface. - */ - -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_MCFSERIAL -int serial_init(void) -{ - volatile uart_t *uart; - u32 counter; - - uart = (volatile uart_t *)(CFG_UART_BASE); - - /* write to SICR: SIM2 = uart mode,dcd does not affect rx */ - uart->ucr = UART_UCR_RESET_RX; - uart->ucr = UART_UCR_RESET_TX; - uart->ucr = UART_UCR_RESET_ERROR; - uart->ucr = UART_UCR_RESET_MR; - __asm__("nop"); - - uart->uimr = 0; - - /* write to CSR: RX/TX baud rate from timers */ - uart->ucsr = (UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK); - - uart->umr = (UART_UMR_BC_8 | UART_UMR_PM_NONE); - uart->umr = UART_UMR_SB_STOP_BITS_1; - - /* Setting up BaudRate */ - counter = (u32) (gd->bus_clk / (gd->baudrate)); - counter >>= 5; - - /* write to CTUR: divide counter upper byte */ - uart->ubg1 = (u8) ((counter & 0xff00) >> 8); - /* write to CTLR: divide counter lower byte */ - uart->ubg2 = (u8) (counter & 0x00ff); - - uart->ucr = (UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED); - - return (0); -} - -void serial_putc(const char c) -{ - volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); - - if (c == '\n') - serial_putc('\r'); - - /* Wait for last character to go. */ - while (!(uart->usr & UART_USR_TXRDY)) ; - - uart->utb = c; -} - -void serial_puts(const char *s) -{ - while (*s) { - serial_putc(*s++); - } -} - -int serial_getc(void) -{ - volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); - - /* Wait for a character to arrive. */ - while (!(uart->usr & UART_USR_RXRDY)) ; - return uart->urb; -} - -int serial_tstc(void) -{ - volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); - - return (uart->usr & UART_USR_RXRDY); -} - -void serial_setbrg(void) -{ - volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); - u32 counter; - - counter = ((gd->bus_clk / gd->baudrate)) >> 5; - counter++; - - /* write to CTUR: divide counter upper byte */ - uart->ubg1 = ((counter & 0xff00) >> 8); - /* write to CTLR: divide counter lower byte */ - uart->ubg2 = (counter & 0x00ff); - - uart->ucr = UART_UCR_RESET_RX; - uart->ucr = UART_UCR_RESET_TX; - - uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED; -} -#endif /* CONFIG_MCFSERIAL */ diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c new file mode 100644 index 0000000..f54aabe --- /dev/null +++ b/drivers/serial/mcfuart.c @@ -0,0 +1,127 @@ +/* + * (C) Copyright 2004-2007 Freescale Semiconductor, Inc. + * TsiChung Liew, Tsi-Chung.Liew@freescale.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/* + * Minimal serial functions needed to use one of the uart ports + * as serial console interface. + */ + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_MCFSERIAL +int serial_init(void) +{ + volatile uart_t *uart; + u32 counter; + + uart = (volatile uart_t *)(CFG_UART_BASE); + + /* write to SICR: SIM2 = uart mode,dcd does not affect rx */ + uart->ucr = UART_UCR_RESET_RX; + uart->ucr = UART_UCR_RESET_TX; + uart->ucr = UART_UCR_RESET_ERROR; + uart->ucr = UART_UCR_RESET_MR; + __asm__("nop"); + + uart->uimr = 0; + + /* write to CSR: RX/TX baud rate from timers */ + uart->ucsr = (UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK); + + uart->umr = (UART_UMR_BC_8 | UART_UMR_PM_NONE); + uart->umr = UART_UMR_SB_STOP_BITS_1; + + /* Setting up BaudRate */ + counter = (u32) (gd->bus_clk / (gd->baudrate)); + counter >>= 5; + + /* write to CTUR: divide counter upper byte */ + uart->ubg1 = (u8) ((counter & 0xff00) >> 8); + /* write to CTLR: divide counter lower byte */ + uart->ubg2 = (u8) (counter & 0x00ff); + + uart->ucr = (UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED); + + return (0); +} + +void serial_putc(const char c) +{ + volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); + + if (c == '\n') + serial_putc('\r'); + + /* Wait for last character to go. */ + while (!(uart->usr & UART_USR_TXRDY)) ; + + uart->utb = c; +} + +void serial_puts(const char *s) +{ + while (*s) { + serial_putc(*s++); + } +} + +int serial_getc(void) +{ + volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); + + /* Wait for a character to arrive. */ + while (!(uart->usr & UART_USR_RXRDY)) ; + return uart->urb; +} + +int serial_tstc(void) +{ + volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); + + return (uart->usr & UART_USR_RXRDY); +} + +void serial_setbrg(void) +{ + volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); + u32 counter; + + counter = ((gd->bus_clk / gd->baudrate)) >> 5; + counter++; + + /* write to CTUR: divide counter upper byte */ + uart->ubg1 = ((counter & 0xff00) >> 8); + /* write to CTLR: divide counter lower byte */ + uart->ubg2 = (counter & 0x00ff); + + uart->ucr = UART_UCR_RESET_RX; + uart->ucr = UART_UCR_RESET_TX; + + uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED; +} +#endif /* CONFIG_MCFSERIAL */ -- cgit v1.1 From 0dca874db62718e41253659e60f3a1de7eb418ce Mon Sep 17 00:00:00 2001 From: TsiChung Date: Tue, 10 Jul 2007 15:45:43 -0500 Subject: Cache update and added CFG_UNIFY_CACHE Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only. Signed-off-by: TsiChung --- drivers/net/mcffec.c | 26 ++++++++------------------ 1 file changed, 8 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index 609210d..11f6721 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -150,23 +150,15 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length) * Wait for ready */ j = 0; -#if (CONFIG_COMMANDS & CFG_CMD_CACHE) - icache_invalid(); -#endif while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) && (j < MCFFEC_TOUT_LOOP)) { udelay(1); j++; -#if (CONFIG_COMMANDS & CFG_CMD_CACHE) - icache_invalid(); -#endif } if (j >= MCFFEC_TOUT_LOOP) { printf("TX not ready\n"); } -#if (CONFIG_COMMANDS & CFG_CMD_CACHE) - icache_invalid(); -#endif + info->txbd[info->txIdx].cbd_bufaddr = (uint) packet; info->txbd[info->txIdx].cbd_datlen = length; info->txbd[info->txIdx].cbd_sc |= BD_ENET_TX_RDY_LST; @@ -174,21 +166,19 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length) /* Activate transmit Buffer Descriptor polling */ fecp->tdar = 0x01000000; /* Descriptor polling active */ - j = 0; -#if (CONFIG_COMMANDS & CFG_CMD_CACHE) +#ifdef CFG_UNIFY_CACHE icache_invalid(); #endif + j = 0; while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) && (j < MCFFEC_TOUT_LOOP)) { udelay(1); j++; -#if (CONFIG_COMMANDS & CFG_CMD_CACHE) - icache_invalid(); -#endif } if (j >= MCFFEC_TOUT_LOOP) { printf("TX timeout\n"); } + #ifdef ET_DEBUG printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n", __FILE__, __LINE__, __FUNCTION__, j, @@ -196,10 +186,7 @@ int fec_send(struct eth_device *dev, volatile void *packet, int length) (info->txbd[info->txIdx].cbd_sc & 0x003C) >> 2); #endif - /* return only status bits */ ; -#if (CONFIG_COMMANDS & CFG_CMD_CACHE) - icache_invalid(); -#endif + /* return only status bits */ rc = (info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_STATS); info->txIdx = (info->txIdx + 1) % TX_BUF_CNT; @@ -213,6 +200,9 @@ int fec_recv(struct eth_device *dev) int length; for (;;) { +#ifdef CFG_UNIFY_CACHE + icache_invalid(); +#endif /* section 16.9.23.2 */ if (info->rxbd[info->rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { length = -1; -- cgit v1.1 From 9998bd37ead85e93953559720710d3b0685c81e6 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Sun, 5 Aug 2007 03:19:10 -0500 Subject: Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART Signed-off-by: TsiChungLiew --- drivers/serial/mcfuart.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c index f54aabe..39d4e18 100644 --- a/drivers/serial/mcfuart.c +++ b/drivers/serial/mcfuart.c @@ -33,7 +33,7 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_MCFSERIAL +#ifdef CONFIG_MCFUART int serial_init(void) { volatile uart_t *uart; @@ -124,4 +124,4 @@ void serial_setbrg(void) uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED; } -#endif /* CONFIG_MCFSERIAL */ +#endif /* CONFIG_MCFUART */ -- cgit v1.1 From 9e737d8476e7d6a596d16caaf6a3853a9a1190a2 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Sun, 5 Aug 2007 03:30:44 -0500 Subject: Declared attributes of void __mii_init(void) as an alias for int mii_init(void) Signed-off-by: TsiChungLiew --- drivers/net/mcffec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index 11f6721..fde1aae 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -101,7 +101,7 @@ void fec_reset(struct eth_device *dev); extern int fecpin_setclear(struct eth_device *dev, int setclear); #ifdef CFG_DISCOVER_PHY -extern void mii_init(void); +extern void __mii_init(void); extern uint mii_send(uint mii_cmd); extern int mii_discover_phy(struct eth_device *dev); extern int mcffec_miiphy_read(char *devname, unsigned char addr, -- cgit v1.1 From 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Sun, 5 Aug 2007 03:55:21 -0500 Subject: Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf() Signed-off-by: TsiChungLiew --- drivers/serial/mcfuart.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c index 39d4e18..bc7077d 100644 --- a/drivers/serial/mcfuart.c +++ b/drivers/serial/mcfuart.c @@ -34,6 +34,8 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_MCFUART +extern void uart_port_conf(void); + int serial_init(void) { volatile uart_t *uart; @@ -41,6 +43,8 @@ int serial_init(void) uart = (volatile uart_t *)(CFG_UART_BASE); + uart_port_conf(); + /* write to SICR: SIM2 = uart mode,dcd does not affect rx */ uart->ucr = UART_UCR_RESET_RX; uart->ucr = UART_UCR_RESET_TX; -- cgit v1.1 From ab77bc547ba561c25ea34457ed17aa0b2f7c2723 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 15:39:17 -0500 Subject: ColdFire: MCF5329 Update and cleanup Signed-off-by: TsiChungLiew --- drivers/net/mcffec.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index fde1aae..68a0ee6 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -51,7 +51,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) +#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) struct fec_info_s fec_info[] = { #ifdef CFG_FEC0_IOBASE @@ -410,7 +410,7 @@ int fec_init(struct eth_device *dev, bd_t * bd) fec_reset(dev); -#if (CONFIG_COMMANDS & CFG_CMD_MII) || defined (CONFIG_MII) || \ +#if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \ defined (CFG_DISCOVER_PHY) mii_init(); @@ -420,7 +420,7 @@ int fec_init(struct eth_device *dev, bd_t * bd) #ifndef CFG_DISCOVER_PHY setFecDuplexSpeed(fecp, bd, (FECDUPLEX << 16) | FECSPEED); #endif /* ifndef CFG_DISCOVER_PHY */ -#endif /* CFG_CMD_MII || CONFIG_MII */ +#endif /* CONFIG_CMD_MII || CONFIG_MII */ /* We use strictly polling mode only */ fecp->eimr = 0; @@ -568,7 +568,7 @@ int mcffec_initialize(bd_t * bis) eth_register(dev); -#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) miiphy_register(dev->name, mcffec_miiphy_read, mcffec_miiphy_write); #endif @@ -580,5 +580,5 @@ int mcffec_initialize(bd_t * bis) return 1; } -#endif /* CFG_CMD_NET, FEC_ENET & NET_MULTI */ +#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */ #endif /* CONFIG_MCFFEC */ -- cgit v1.1 From 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7 Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Thu, 16 Aug 2007 15:05:11 -0500 Subject: ColdFire: Add M54455EVB for MCF5445x Signed-off-by: TsiChungLiew --- drivers/net/mcffec.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index 68a0ee6..2e0ddeb 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -430,20 +430,33 @@ int fec_init(struct eth_device *dev, bd_t * bd) /* Set station address */ if ((u32) fecp == CFG_FEC0_IOBASE) { +#ifdef CFG_FEC1_IOBASE + volatile fec_t *fecp1 = (fec_t *) (CFG_FEC1_IOBASE); + ea = &bd->bi_enet1addr[0]; + fecp1->palr = + (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp1->paur = (ea[4] << 24) | (ea[5] << 16); +#endif ea = &bd->bi_enetaddr[0]; + fecp->palr = + (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp->paur = (ea[4] << 24) | (ea[5] << 16); } else { +#ifdef CFG_FEC0_IOBASE + volatile fec_t *fecp0 = (fec_t *) (CFG_FEC0_IOBASE); + ea = &bd->bi_enetaddr[0]; + fecp0->palr = + (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp0->paur = (ea[4] << 24) | (ea[5] << 16); +#endif #ifdef CFG_FEC1_IOBASE ea = &bd->bi_enet1addr[0]; + fecp->palr = + (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); + fecp->paur = (ea[4] << 24) | (ea[5] << 16); #endif } - fecp->palr = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]); - fecp->paur = (ea[4] << 24) | (ea[5] << 16); -#ifdef ET_DEBUG - printf("Eth Addrs: %02x:%02x:%02x:%02x:%02x:%02x\n", - ea[0], ea[1], ea[2], ea[3], ea[4], ea[5]); -#endif - /* Clear unicast address hash table */ fecp->iaur = 0; fecp->ialr = 0; -- cgit v1.1