From 1728eb577dc1de459196ca45068f3feced77a198 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 22 Nov 2017 02:38:15 +0900 Subject: mtd: nand: Create a NAND reset function When NAND devices are resetted some initialization may have to be done, like for example they have to be configured for the timing mode that shall be used. To get a common place where this initialization can be implemented create a nand_reset() function. This currently only issues a NAND_CMD_RESET to the NAND device. The places issuing this command manually are replaced with a call to nand_reset(). Signed-off-by: Sascha Hauer Signed-off-by: Boris Brezillon [Linux commit: 2f94abfe35b210e7711af9202a3dcfc9e779219a] Signed-off-by: Masahiro Yamada --- drivers/mtd/nand/nand_base.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 18f4169..77da6fa 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -902,6 +902,21 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) } /** + * nand_reset - Reset and initialize a NAND device + * @chip: The NAND chip + * + * Returns 0 for success or negative error code otherwise + */ +int nand_reset(struct nand_chip *chip) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + + chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); + + return 0; +} + +/** * nand_check_erased_buf - check if a buffer contains (almost) only 0xff data * @buf: buffer to test * @len: buffer length @@ -2591,7 +2606,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, * if we don't do this. I have no clue why, but I seem to have 'fixed' * it in the doc2000 driver in August 1999. dwmw2. */ - chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); + nand_reset(chip); /* Check, if it is write protected */ if (nand_check_wp(mtd)) { @@ -3612,7 +3627,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx) * after power-up. */ - chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); + nand_reset(chip); /* Send the command for reading device ID */ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); @@ -3873,7 +3888,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, for (i = 1; i < maxchips; i++) { chip->select_chip(mtd, i); /* See comment in nand_get_flash_type for reset */ - chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); + nand_reset(chip); /* Send the command for reading device ID */ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); /* Read manufacturer and device IDs */ -- cgit v1.1