From 607dfdf568baa506dc4ff33a38be3478820648fd Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 24 Mar 2012 10:58:57 +0000 Subject: mx28evk: Add a README file Add a README file for mx28evk board. Signed-off-by: Fabio Estevam Acked-by: Marek Vasut --- doc/README.mx28evk | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 doc/README.mx28evk (limited to 'doc') diff --git a/doc/README.mx28evk b/doc/README.mx28evk new file mode 100644 index 0000000..c6c3d37 --- /dev/null +++ b/doc/README.mx28evk @@ -0,0 +1,29 @@ +FREESCALE MX28EVK +================== + +Supported hardware: only MX28EVK rev D is supported in U-boot. + +Files of the MX28EVK port +-------------------------- + +arch/arm/cpu/arm926ejs/mx28/ - The CPU support code for the Freescale i.MX28 +arch/arm/include/asm/arch-mx28/ - Header files for the Freescale i.MX28 +board/freescale/mx28evk/ - MX28EVK board specific files +include/configs/mx28evk.h - MX28EVK configuration file + +Jumper configuration +--------------------- + +To boot MX28EVK from an SD card, set the boot mode DIP switches as: + + * Boot Mode Select: 1 0 0 1 (Boot from SD card Slot 0 - U42) + * JTAG PSWITCH RESET: To the left (reset enabled) + * Battery Source: Down + * Wall 5V: Up + * VDD 5V: To the left (off) + * Hold Button: Down (off) + +Follow the instructions from doc/README.mx28_common to generate a bootable SD +card. + +Insert the SD card in slot 0, power up the board and U-boot will boot. -- cgit v1.1