From 4b5bc8b9e3b0a290c016a2dbdacbef93e4f74096 Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Mon, 20 Mar 2023 11:45:56 +0000 Subject: doc: boards: amlogic: update documentation for P200 Improve documentation. Notably we can now support U-Boot install to the internal eMMC storage in addition to SD cards. Signed-off-by: Christian Hewitt Link: https://lore.kernel.org/r/20230320114609.930145-21-christianshewitt@gmail.com [narmstrong: fixed doc build] Signed-off-by: Neil Armstrong --- doc/board/amlogic/p200.rst | 88 ++++++++++++++++++++++++++++------------------ 1 file changed, 54 insertions(+), 34 deletions(-) (limited to 'doc') diff --git a/doc/board/amlogic/p200.rst b/doc/board/amlogic/p200.rst index 5e7c6b0..e223897 100644 --- a/doc/board/amlogic/p200.rst +++ b/doc/board/amlogic/p200.rst @@ -1,25 +1,24 @@ .. SPDX-License-Identifier: GPL-2.0+ -U-Boot for Amlogic P200 -======================= +U-Boot for Amlogic P200 (S905) +============================== -P200 is a reference board manufactured by Amlogic with the following -specifications: +P200 is a reference board manufactured by Amlogic with the following specification: - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz - ARM Mali 450 GPU - 2GB DDR3 SDRAM - Gigabit Ethernet - HDMI 2.0 4K/60Hz display - - 2 x USB 2.0 Host + - 2x USB 2.0 Host - eMMC, microSD - Infrared receiver - SDIO WiFi Module - - CVBS+Stereo Audio Jack + - CVBS + Stereo Audio Jack Schematics are available from Amlogic on demand. -U-Boot compilation +U-Boot Compilation ------------------ .. code-block:: bash @@ -28,14 +27,21 @@ U-Boot compilation $ make p200_defconfig $ make -Image creation --------------- +U-Boot Signing with Pre-Built FIP repo +-------------------------------------- -For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `p200` +.. code-block:: bash + + $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1 + $ cd amlogic-boot-fip + $ mkdir my-output-dir + $ ./build-fip.sh p200 /path/to/u-boot/u-boot.bin my-output-dir -Amlogic doesn't provide sources for the firmware and for tools needed -to create the bootloader image, so it is necessary to obtain them from -the git tree published by the board vendor: +U-Boot Manual Signing +--------------------- + +Amlogic does not provide sources for the firmware and tools needed to create a bootloader +image but sources have been shared by Linux development contractor, Baylibre: .. code-block:: bash @@ -50,7 +56,7 @@ the git tree published by the board vendor: $ make $ export FIPDIR=$PWD/fip -Go back to mainline U-boot source tree then : +Go back to the mainline U-Boot source tree then: .. code-block:: bash @@ -63,37 +69,51 @@ Go back to mainline U-boot source tree then : $ cp $FIPDIR/gxb/bl301.bin fip/ $ cp $FIPDIR/gxb/bl31.img fip/ $ cp u-boot.bin fip/bl33.bin + $ wget https://github.com/LibreELEC/amlogic-boot-fip/raw/master/nanopi-k2/bl1.bin.hardkernel fip/bl1.bin.hardkernel + $ chmod +x fip/bl1.bin.hardkernel + $ wget https://github.com/LibreELEC/amlogic-boot-fip/raw/master/nanopi-k2/aml_chksum fip/aml_chksum + $ chmod +x fip/aml_chksum $ $FIPDIR/blx_fix.sh \ - fip/bl30.bin \ - fip/zero_tmp \ - fip/bl30_zero.bin \ - fip/bl301.bin \ - fip/bl301_zero.bin \ - fip/bl30_new.bin \ - bl30 + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 $ $FIPDIR/blx_fix.sh \ - fip/bl2_acs.bin \ - fip/zero_tmp \ - fip/bl2_zero.bin \ - fip/bl21.bin \ - fip/bl21_zero.bin \ - fip/bl2_new.bin \ - bl2 - - $ $FIPDIR/fip_create --bl30 fip/bl30_new.bin --bl31 fip/bl31.img --bl33 fip/bl33.bin fip/fip.bin + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $FIPDIR/fip_create --bl30 fip/bl30_new.bin \ + --bl31 fip/bl31.img \ + --bl33 fip/bl33.bin \ + fip/fip.bin $ cat fip/bl2_new.bin fip/fip.bin >fip/boot_new.bin - $ $FIPDIR/gxb/aml_encrypt_gxb --bootsig --input fip/boot_new.bin --output fip/u-boot.bin + $ $FIPDIR/gxb/aml_encrypt_gxb --bootsig \ + --input fip/boot_new.bin \ + --output fip/u-boot.bin and then write the image to SD with: .. code-block:: bash - $ DEV=/dev/your_sd_device - $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 - $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 + $ DEV=/dev/boot_device + $ dd if=fip/u-boot.bin of=fip/u-boot.bin.gxbb bs=512 conv=fsync + $ dd if=fip/u-boot.bin of=fip/u-boot.bin.gxbb bs=512 seek=9 skip=8 count=87 conv=fsync,notrunc + $ dd if=/dev/zero of=fip/u-boot.bin.gxbb bs=512 seek=8 count=1 conv=fsync,notrunc + $ dd if=bl1.bin.hardkernel of=fip/u-boot.bin.gxbb bs=512 seek=2 skip=2 count=1 conv=fsync,notrunc + $ ./aml_chksum fip/u-boot.bin.gxbb + $ dd if=fip/u-boot.gxbb of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.gxbb of=$DEV conv=fsync,notrunc bs=1 count=440 -- cgit v1.1