From 028abfd9b1576b45cf756b9a0c978cfe17906314 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 23 Aug 2021 09:56:42 -0300 Subject: imx8mm-evk: Generate a single bootable flash.bin again After the conversion to binman in commit 8996e6b7c6a1 ("imx8mm_evk: switch to use binman to pack images"), it is necessary to flash both flash.bin and u-boot.itb to get a bootable system. Prior to this commit, only flash.bin was needed. Such new requirement breaks existing distro mechanisms to generate the final binary because the extra u-boot.itb is now required. Generate a final flash.bin that can be used again as a single bootable binary to keep the original behavior. After this change the SPL binary is called spl.bin, which is a more descriptive name for its purpose, and can still be used standalone (for example, for secure boot purposes). Also update imx8mm_evk.rst to remove the u-boot.itb copy step. Signed-off-by: Fabio Estevam Reviewed-by: Frieder Schrempf Reviewed-by: Heiko Schocher Reviewed-by: Marcel Ziswiler Reviewed-by: Heiko Thiery --- doc/board/nxp/imx8mm_evk.rst | 1 - 1 file changed, 1 deletion(-) (limited to 'doc') diff --git a/doc/board/nxp/imx8mm_evk.rst b/doc/board/nxp/imx8mm_evk.rst index 7fd3d72..b377c4d 100644 --- a/doc/board/nxp/imx8mm_evk.rst +++ b/doc/board/nxp/imx8mm_evk.rst @@ -50,7 +50,6 @@ Burn the flash.bin to MicroSD card offset 33KB: .. code-block:: bash $sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=notrunc - $sudo dd if=u-boot.itb of=/dev/sdc bs=1024 seek=384 conv=sync Boot ---- -- cgit v1.1