From f2d7a36ec258f49eb80c9d4a0cc6cb7e697f5d6a Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sat, 10 Jul 2021 21:14:26 -0600 Subject: Rename SPL_ETH_SUPPORT to SPL_ETH Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass --- doc/SPL/README.am335x-network | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'doc/SPL/README.am335x-network') diff --git a/doc/SPL/README.am335x-network b/doc/SPL/README.am335x-network index e3cf93f..e052706 100644 --- a/doc/SPL/README.am335x-network +++ b/doc/SPL/README.am335x-network @@ -8,7 +8,7 @@ NAND and bricked (empty) board with only a network cable. I. Building the required images 1. You have to enable generic SPL configuration options (see doc/README.SPL) as well as CONFIG_SPL_NET_SUPPORT, -CONFIG_ETH_SUPPORT, CONFIG_SPL_LIBGENERIC_SUPPORT and +CONFIG_SPL_ETH, CONFIG_SPL_LIBGENERIC_SUPPORT and CONFIG_SPL_LIBCOMMON_SUPPORT in your board configuration file to build SPL with support for booting over the network. Also you have to enable the driver for the NIC used and CONFIG_SPL_BOARD_INIT option if your -- cgit v1.1