From 14d0a02a168b36e87665b8d7f42fa3e88263d26d Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 7 Oct 2010 21:51:12 +0200 Subject: Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE The change is currently needed to be able to remove the board configuration scripting from the top level Makefile and replace it by a simple, table driven script. Moving this configuration setting into the "CONFIG_*" name space is also desirable because it is needed if we ever should move forward to a Kconfig driven configuration system. Signed-off-by: Wolfgang Denk --- doc/README.m68k | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'doc/README.m68k') diff --git a/doc/README.m68k b/doc/README.m68k index a00ab69..3766b33 100644 --- a/doc/README.m68k +++ b/doc/README.m68k @@ -72,7 +72,7 @@ For the preloader, please see http://mailman.uclinux.org/pipermail/uclinux-dev/2003-December/023384.html U-boot is configured to run at 0x20000 at default. This can be configured by -change TEXT_BASE in board/m5282evb/config.mk and CONFIG_SYS_MONITOR_BASE in +change CONFIG_SYS_TEXT_BASE in board/m5282evb/config.mk and CONFIG_SYS_MONITOR_BASE in include/configs/M5282EVB.h. 3.2 BuS EB+MCF-EV123 @@ -96,7 +96,7 @@ CONFIG_MONITOR_IS_IN_RAM must be defined. If it is defined the initial vector table and basic processor initialization will not be compiled in. The start address of u-boot must be adjusted in the boards config header file (CONFIG_SYS_MONITOR_BASE) and Makefile -(TEXT_BASE) to the load address. +(CONFIG_SYS_TEXT_BASE) to the load address. 4.1 MCF5272 specific Options/Settings ------------------------------------- -- cgit v1.1