From 6d0f6bcf337c5261c08fabe12982178c2c489d76 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 16 Oct 2008 15:01:15 +0200 Subject: rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- cpu/ppc4xx/start.S | 344 ++++++++++++++++++++++++++--------------------------- 1 file changed, 172 insertions(+), 172 deletions(-) (limited to 'cpu/ppc4xx/start.S') diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 97411bd..31902a0 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -77,69 +77,69 @@ #define CONFIG_IDENT_STRING "" #endif -#ifdef CFG_INIT_DCACHE_CS -# if (CFG_INIT_DCACHE_CS == 0) +#ifdef CONFIG_SYS_INIT_DCACHE_CS +# if (CONFIG_SYS_INIT_DCACHE_CS == 0) # define PBxAP pb0ap # define PBxCR pb0cr -# if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR)) -# define PBxAP_VAL CFG_EBC_PB0AP -# define PBxCR_VAL CFG_EBC_PB0CR +# if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR)) +# define PBxAP_VAL CONFIG_SYS_EBC_PB0AP +# define PBxCR_VAL CONFIG_SYS_EBC_PB0CR # endif # endif -# if (CFG_INIT_DCACHE_CS == 1) +# if (CONFIG_SYS_INIT_DCACHE_CS == 1) # define PBxAP pb1ap # define PBxCR pb1cr -# if (defined(CFG_EBC_PB1AP) && defined(CFG_EBC_PB1CR)) -# define PBxAP_VAL CFG_EBC_PB1AP -# define PBxCR_VAL CFG_EBC_PB1CR +# if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR)) +# define PBxAP_VAL CONFIG_SYS_EBC_PB1AP +# define PBxCR_VAL CONFIG_SYS_EBC_PB1CR # endif # endif -# if (CFG_INIT_DCACHE_CS == 2) +# if (CONFIG_SYS_INIT_DCACHE_CS == 2) # define PBxAP pb2ap # define PBxCR pb2cr -# if (defined(CFG_EBC_PB2AP) && defined(CFG_EBC_PB2CR)) -# define PBxAP_VAL CFG_EBC_PB2AP -# define PBxCR_VAL CFG_EBC_PB2CR +# if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR)) +# define PBxAP_VAL CONFIG_SYS_EBC_PB2AP +# define PBxCR_VAL CONFIG_SYS_EBC_PB2CR # endif # endif -# if (CFG_INIT_DCACHE_CS == 3) +# if (CONFIG_SYS_INIT_DCACHE_CS == 3) # define PBxAP pb3ap # define PBxCR pb3cr -# if (defined(CFG_EBC_PB3AP) && defined(CFG_EBC_PB3CR)) -# define PBxAP_VAL CFG_EBC_PB3AP -# define PBxCR_VAL CFG_EBC_PB3CR +# if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR)) +# define PBxAP_VAL CONFIG_SYS_EBC_PB3AP +# define PBxCR_VAL CONFIG_SYS_EBC_PB3CR # endif # endif -# if (CFG_INIT_DCACHE_CS == 4) +# if (CONFIG_SYS_INIT_DCACHE_CS == 4) # define PBxAP pb4ap # define PBxCR pb4cr -# if (defined(CFG_EBC_PB4AP) && defined(CFG_EBC_PB4CR)) -# define PBxAP_VAL CFG_EBC_PB4AP -# define PBxCR_VAL CFG_EBC_PB4CR +# if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR)) +# define PBxAP_VAL CONFIG_SYS_EBC_PB4AP +# define PBxCR_VAL CONFIG_SYS_EBC_PB4CR # endif # endif -# if (CFG_INIT_DCACHE_CS == 5) +# if (CONFIG_SYS_INIT_DCACHE_CS == 5) # define PBxAP pb5ap # define PBxCR pb5cr -# if (defined(CFG_EBC_PB5AP) && defined(CFG_EBC_PB5CR)) -# define PBxAP_VAL CFG_EBC_PB5AP -# define PBxCR_VAL CFG_EBC_PB5CR +# if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR)) +# define PBxAP_VAL CONFIG_SYS_EBC_PB5AP +# define PBxCR_VAL CONFIG_SYS_EBC_PB5CR # endif # endif -# if (CFG_INIT_DCACHE_CS == 6) +# if (CONFIG_SYS_INIT_DCACHE_CS == 6) # define PBxAP pb6ap # define PBxCR pb6cr -# if (defined(CFG_EBC_PB6AP) && defined(CFG_EBC_PB6CR)) -# define PBxAP_VAL CFG_EBC_PB6AP -# define PBxCR_VAL CFG_EBC_PB6CR +# if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR)) +# define PBxAP_VAL CONFIG_SYS_EBC_PB6AP +# define PBxCR_VAL CONFIG_SYS_EBC_PB6CR # endif # endif -# if (CFG_INIT_DCACHE_CS == 7) +# if (CONFIG_SYS_INIT_DCACHE_CS == 7) # define PBxAP pb7ap # define PBxCR pb7cr -# if (defined(CFG_EBC_PB7AP) && defined(CFG_EBC_PB7CR)) -# define PBxAP_VAL CFG_EBC_PB7AP -# define PBxCR_VAL CFG_EBC_PB7CR +# if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR)) +# define PBxAP_VAL CONFIG_SYS_EBC_PB7AP +# define PBxCR_VAL CONFIG_SYS_EBC_PB7CR # endif # endif # ifndef PBxAP_VAL @@ -149,11 +149,11 @@ # define PBxCR_VAL 0 # endif /* - * Memory Bank x (nothingness) initialization CFG_INIT_RAM_ADDR + 64 MiB + * Memory Bank x (nothingness) initialization CONFIG_SYS_INIT_RAM_ADDR + 64 MiB * used as temporary stack pointer for the primordial stack */ -# ifndef CFG_INIT_DCACHE_PBxAR -# define CFG_INIT_DCACHE_PBxAR (EBC_BXAP_BME_DISABLED | \ +# ifndef CONFIG_SYS_INIT_DCACHE_PBxAR +# define CONFIG_SYS_INIT_DCACHE_PBxAR (EBC_BXAP_BME_DISABLED | \ EBC_BXAP_TWT_ENCODE(7) | \ EBC_BXAP_BCE_DISABLE | \ EBC_BXAP_BCT_2TRANS | \ @@ -166,42 +166,42 @@ EBC_BXAP_SOR_NONDELAYED | \ EBC_BXAP_BEM_WRITEONLY | \ EBC_BXAP_PEN_DISABLED) -# endif /* CFG_INIT_DCACHE_PBxAR */ -# ifndef CFG_INIT_DCACHE_PBxCR -# define CFG_INIT_DCACHE_PBxCR (EBC_BXCR_BAS_ENCODE(CFG_INIT_RAM_ADDR) | \ +# endif /* CONFIG_SYS_INIT_DCACHE_PBxAR */ +# ifndef CONFIG_SYS_INIT_DCACHE_PBxCR +# define CONFIG_SYS_INIT_DCACHE_PBxCR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_INIT_RAM_ADDR) | \ EBC_BXCR_BS_64MB | \ EBC_BXCR_BU_RW | \ EBC_BXCR_BW_16BIT) -# endif /* CFG_INIT_DCACHE_PBxCR */ -# ifndef CFG_INIT_RAM_PATTERN -# define CFG_INIT_RAM_PATTERN 0xDEADDEAD +# endif /* CONFIG_SYS_INIT_DCACHE_PBxCR */ +# ifndef CONFIG_SYS_INIT_RAM_PATTERN +# define CONFIG_SYS_INIT_RAM_PATTERN 0xDEADDEAD # endif -#endif /* CFG_INIT_DCACHE_CS */ +#endif /* CONFIG_SYS_INIT_DCACHE_CS */ -#if (defined(CFG_INIT_RAM_DCACHE) && (CFG_INIT_RAM_END > (4 << 10))) -#error Only 4k of init-ram is supported - please adjust CFG_INIT_RAM_END! +#if (defined(CONFIG_SYS_INIT_RAM_DCACHE) && (CONFIG_SYS_INIT_RAM_END > (4 << 10))) +#error Only 4k of init-ram is supported - please adjust CONFIG_SYS_INIT_RAM_END! #endif /* * Unless otherwise overriden, enable two 128MB cachable instruction regions - * at CFG_SDRAM_BASE and another 128MB cacheable instruction region covering - * NOR flash at CFG_FLASH_BASE. Disable all cacheable data regions. + * at CONFIG_SYS_SDRAM_BASE and another 128MB cacheable instruction region covering + * NOR flash at CONFIG_SYS_FLASH_BASE. Disable all cacheable data regions. */ -#if !defined(CFG_FLASH_BASE) +#if !defined(CONFIG_SYS_FLASH_BASE) /* If not already defined, set it to the "last" 128MByte region */ -# define CFG_FLASH_BASE 0xf8000000 +# define CONFIG_SYS_FLASH_BASE 0xf8000000 #endif -#if !defined(CFG_ICACHE_SACR_VALUE) -# define CFG_ICACHE_SACR_VALUE \ - (PPC_128MB_SACR_VALUE(CFG_SDRAM_BASE + ( 0 << 20)) | \ - PPC_128MB_SACR_VALUE(CFG_SDRAM_BASE + (128 << 20)) | \ - PPC_128MB_SACR_VALUE(CFG_FLASH_BASE)) -#endif /* !defined(CFG_ICACHE_SACR_VALUE) */ - -#if !defined(CFG_DCACHE_SACR_VALUE) -# define CFG_DCACHE_SACR_VALUE \ +#if !defined(CONFIG_SYS_ICACHE_SACR_VALUE) +# define CONFIG_SYS_ICACHE_SACR_VALUE \ + (PPC_128MB_SACR_VALUE(CONFIG_SYS_SDRAM_BASE + ( 0 << 20)) | \ + PPC_128MB_SACR_VALUE(CONFIG_SYS_SDRAM_BASE + (128 << 20)) | \ + PPC_128MB_SACR_VALUE(CONFIG_SYS_FLASH_BASE)) +#endif /* !defined(CONFIG_SYS_ICACHE_SACR_VALUE) */ + +#if !defined(CONFIG_SYS_DCACHE_SACR_VALUE) +# define CONFIG_SYS_DCACHE_SACR_VALUE \ (0x00000000) -#endif /* !defined(CFG_DCACHE_SACR_VALUE) */ +#endif /* !defined(CONFIG_SYS_DCACHE_SACR_VALUE) */ #define function_prolog(func_name) .text; \ .align 2; \ @@ -609,15 +609,15 @@ _start: /*----------------------------------------------------------------*/ /* Debug setup -- some (not very good) ice's need an event*/ - /* to establish control :-( Define CFG_INIT_DBCR to the dbsr */ + /* to establish control :-( Define CONFIG_SYS_INIT_DBCR to the dbsr */ /* value you need in this case 0x8cff 0000 should do the trick */ /*----------------------------------------------------------------*/ -#if defined(CFG_INIT_DBCR) +#if defined(CONFIG_SYS_INIT_DBCR) lis r1,0xffff ori r1,r1,0xffff mtspr dbsr,r1 /* Clear all status bits */ - lis r0,CFG_INIT_DBCR@h - ori r0,r0,CFG_INIT_DBCR@l + lis r0,CONFIG_SYS_INIT_DBCR@h + ori r0,r0,CONFIG_SYS_INIT_DBCR@l mtspr dbcr0,r0 isync #endif @@ -627,12 +627,12 @@ _start: /*----------------------------------------------------------------*/ li r0,0 -#ifdef CFG_INIT_RAM_DCACHE +#ifdef CONFIG_SYS_INIT_RAM_DCACHE /* Clear Dcache to use as RAM */ - addis r3,r0,CFG_INIT_RAM_ADDR@h - ori r3,r3,CFG_INIT_RAM_ADDR@l - addis r4,r0,CFG_INIT_RAM_END@h - ori r4,r4,CFG_INIT_RAM_END@l + addis r3,r0,CONFIG_SYS_INIT_RAM_ADDR@h + ori r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l + addis r4,r0,CONFIG_SYS_INIT_RAM_END@h + ori r4,r4,CONFIG_SYS_INIT_RAM_END@l rlwinm. r5,r4,0,27,31 rlwinm r5,r4,27,5,31 beq ..d_ran @@ -670,7 +670,7 @@ _start: mtspr dtv3,r1 msync isync -#endif /* CFG_INIT_RAM_DCACHE */ +#endif /* CONFIG_SYS_INIT_RAM_DCACHE */ /* 440EP & 440GR are only 440er PPC's without internal SRAM */ #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) @@ -744,8 +744,8 @@ _start: /*----------------------------------------------------------------*/ /* Setup the stack in internal SRAM */ /*----------------------------------------------------------------*/ - lis r1,CFG_INIT_RAM_ADDR@h - ori r1,r1,CFG_INIT_SP_OFFSET@l + lis r1,CONFIG_SYS_INIT_RAM_ADDR@h + ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET@l li r0,0 stwu r0,-4(r1) stwu r0,-4(r1) /* Terminate call chain */ @@ -852,18 +852,18 @@ _start: sync /* Set-up icache cacheability. */ - lis r1, CFG_ICACHE_SACR_VALUE@h - ori r1, r1, CFG_ICACHE_SACR_VALUE@l + lis r1, CONFIG_SYS_ICACHE_SACR_VALUE@h + ori r1, r1, CONFIG_SYS_ICACHE_SACR_VALUE@l mticcr r1 isync /* Set-up dcache cacheability. */ - lis r1, CFG_DCACHE_SACR_VALUE@h - ori r1, r1, CFG_DCACHE_SACR_VALUE@l + lis r1, CONFIG_SYS_DCACHE_SACR_VALUE@h + ori r1, r1, CONFIG_SYS_DCACHE_SACR_VALUE@l mtdccr r1 - addis r1,r0,CFG_INIT_RAM_ADDR@h - ori r1,r1,CFG_INIT_SP_OFFSET /* set up the stack to SDRAM */ + addis r1,r0,CONFIG_SYS_INIT_RAM_ADDR@h + ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack to SDRAM */ li r0, 0 /* Make room for stack frame header and */ stwu r0, -4(r1) /* clear final stack frame so that */ stwu r0, -4(r1) /* stack backtraces terminate cleanly */ @@ -908,31 +908,31 @@ _start: bl invalidate_dcache /* Set-up icache cacheability. */ - lis r4, CFG_ICACHE_SACR_VALUE@h - ori r4, r4, CFG_ICACHE_SACR_VALUE@l + lis r4, CONFIG_SYS_ICACHE_SACR_VALUE@h + ori r4, r4, CONFIG_SYS_ICACHE_SACR_VALUE@l mticcr r4 isync /* Set-up dcache cacheability. */ - lis r4, CFG_DCACHE_SACR_VALUE@h - ori r4, r4, CFG_DCACHE_SACR_VALUE@l + lis r4, CONFIG_SYS_DCACHE_SACR_VALUE@h + ori r4, r4, CONFIG_SYS_DCACHE_SACR_VALUE@l mtdccr r4 -#if !(defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR)) +#if !(defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR)) /*----------------------------------------------------------------------- */ /* Tune the speed and size for flash CS0 */ /*----------------------------------------------------------------------- */ bl ext_bus_cntlr_init #endif -#if !(defined(CFG_INIT_DCACHE_CS) || defined(CFG_TEMP_STACK_OCM)) +#if !(defined(CONFIG_SYS_INIT_DCACHE_CS) || defined(CONFIG_SYS_TEMP_STACK_OCM)) /* * For boards that don't have OCM and can't use the data cache * for their primordial stack, setup stack here directly after the * SDRAM is initialized in ext_bus_cntlr_init. */ - lis r1, CFG_INIT_RAM_ADDR@h - ori r1,r1,CFG_INIT_SP_OFFSET /* set up the stack in SDRAM */ + lis r1, CONFIG_SYS_INIT_RAM_ADDR@h + ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack in SDRAM */ li r0, 0 /* Make room for stack frame header and */ stwu r0, -4(r1) /* clear final stack frame so that */ @@ -946,7 +946,7 @@ _start: ori r0, r0, RESET_VECTOR@l stwu r1, -8(r1) /* Save back chain and move SP */ stw r0, +12(r1) /* Save return addr (underflow vect) */ -#endif /* !(CFG_INIT_DCACHE_CS || !CFG_TEM_STACK_OCM) */ +#endif /* !(CONFIG_SYS_INIT_DCACHE_CS || !CONFIG_SYS_TEM_STACK_OCM) */ #if defined(CONFIG_405EP) /*----------------------------------------------------------------------- */ @@ -959,25 +959,25 @@ _start: bl ppc405ep_init /* do ppc405ep specific init */ #endif /* CONFIG_405EP */ -#if defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE) +#if defined(CONFIG_SYS_OCM_DATA_ADDR) && defined(CONFIG_SYS_OCM_DATA_SIZE) #if defined(CONFIG_405EZ) /******************************************************************** * Setup OCM - On Chip Memory - PPC405EZ uses OCM Controller V2 *******************************************************************/ /* * We can map the OCM on the PLB3, so map it at - * CFG_OCM_DATA_ADDR + 0x8000 + * CONFIG_SYS_OCM_DATA_ADDR + 0x8000 */ - lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */ - ori r3,r3,CFG_OCM_DATA_ADDR@l + lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */ + ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */ mtdcr ocmplb3cr1,r3 /* Set PLB Access */ ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */ mtdcr ocmplb3cr2,r3 /* Set PLB Access */ isync - lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */ - ori r3,r3,CFG_OCM_DATA_ADDR@l + lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */ + ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */ mtdcr ocmdscr1, r3 /* Set Data Side */ mtdcr ocmiscr1, r3 /* Set Instruction Side */ @@ -1003,8 +1003,8 @@ _start: mtdcr ocmdscntl, r4 /* set data-side IRAM config */ isync - lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */ - ori r3,r3,CFG_OCM_DATA_ADDR@l + lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */ + ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l mtdcr ocmdsarc, r3 addis r4, 0, 0xC000 /* OCM data area enabled */ mtdcr ocmdscntl, r4 @@ -1015,26 +1015,26 @@ _start: /*----------------------------------------------------------------------- */ /* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */ /*----------------------------------------------------------------------- */ -#ifdef CFG_INIT_DCACHE_CS +#ifdef CONFIG_SYS_INIT_DCACHE_CS li r4, PBxAP mtdcr ebccfga, r4 - lis r4, CFG_INIT_DCACHE_PBxAR@h - ori r4, r4, CFG_INIT_DCACHE_PBxAR@l + lis r4, CONFIG_SYS_INIT_DCACHE_PBxAR@h + ori r4, r4, CONFIG_SYS_INIT_DCACHE_PBxAR@l mtdcr ebccfgd, r4 addi r4, 0, PBxCR mtdcr ebccfga, r4 - lis r4, CFG_INIT_DCACHE_PBxCR@h - ori r4, r4, CFG_INIT_DCACHE_PBxCR@l + lis r4, CONFIG_SYS_INIT_DCACHE_PBxCR@h + ori r4, r4, CONFIG_SYS_INIT_DCACHE_PBxCR@l mtdcr ebccfgd, r4 /* * Enable the data cache for the 128MB storage access control region - * at CFG_INIT_RAM_ADDR. + * at CONFIG_SYS_INIT_RAM_ADDR. */ mfdccr r4 - oris r4, r4, PPC_128MB_SACR_VALUE(CFG_INIT_RAM_ADDR)@h - ori r4, r4, PPC_128MB_SACR_VALUE(CFG_INIT_RAM_ADDR)@l + oris r4, r4, PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@h + ori r4, r4, PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@l mtdccr r4 /* @@ -1044,11 +1044,11 @@ _start: */ li r0, 0 - lis r3, CFG_INIT_RAM_ADDR@h - ori r3, r3, CFG_INIT_RAM_ADDR@l + lis r3, CONFIG_SYS_INIT_RAM_ADDR@h + ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l - lis r4, CFG_INIT_RAM_END@h - ori r4, r4, CFG_INIT_RAM_END@l + lis r4, CONFIG_SYS_INIT_RAM_END@h + ori r4, r4, CONFIG_SYS_INIT_RAM_END@l /* * Convert the size, in bytes, to the number of cache lines/blocks @@ -1072,18 +1072,18 @@ _start: * Load the initial stack pointer and data area and convert the size, * in bytes, to the number of words to initialize to a known value. */ - lis r1, CFG_INIT_RAM_ADDR@h - ori r1, r1, CFG_INIT_SP_OFFSET@l + lis r1, CONFIG_SYS_INIT_RAM_ADDR@h + ori r1, r1, CONFIG_SYS_INIT_SP_OFFSET@l - lis r4, (CFG_INIT_RAM_END >> 2)@h - ori r4, r4, (CFG_INIT_RAM_END >> 2)@l + lis r4, (CONFIG_SYS_INIT_RAM_END >> 2)@h + ori r4, r4, (CONFIG_SYS_INIT_RAM_END >> 2)@l mtctr r4 - lis r2, CFG_INIT_RAM_ADDR@h - ori r2, r2, CFG_INIT_RAM_END@l + lis r2, CONFIG_SYS_INIT_RAM_ADDR@h + ori r2, r2, CONFIG_SYS_INIT_RAM_END@l - lis r4, CFG_INIT_RAM_PATTERN@h - ori r4, r4, CFG_INIT_RAM_PATTERN@l + lis r4, CONFIG_SYS_INIT_RAM_PATTERN@h + ori r4, r4, CONFIG_SYS_INIT_RAM_PATTERN@l ..stackloop: stwu r4, -4(r2) @@ -1106,15 +1106,15 @@ _start: stwu r1, -8(r1) /* Save back chain and move SP */ stw r0, +12(r1) /* Save return addr (underflow vect) */ -#elif defined(CFG_TEMP_STACK_OCM) && \ - (defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE)) +#elif defined(CONFIG_SYS_TEMP_STACK_OCM) && \ + (defined(CONFIG_SYS_OCM_DATA_ADDR) && defined(CONFIG_SYS_OCM_DATA_SIZE)) /* * Stack in OCM. */ /* Set up Stack at top of OCM */ - lis r1, (CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET)@h - ori r1, r1, (CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET)@l + lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)@h + ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)@l /* Set up a zeroized stack frame so that backtrace works right */ li r0, 0 @@ -1130,7 +1130,7 @@ _start: ori r0, r0, RESET_VECTOR@l stwu r1, -8(r1) /* Save back chain and move SP */ stw r0, +12(r1) /* Save return addr (underflow vect) */ -#endif /* CFG_INIT_DCACHE_CS */ +#endif /* CONFIG_SYS_INIT_DCACHE_CS */ #ifdef CONFIG_NAND_SPL bl nand_boot_common /* will not return */ @@ -1341,7 +1341,7 @@ in32r: */ .globl relocate_code relocate_code: -#if defined(CONFIG_4xx_DCACHE) || defined(CFG_INIT_DCACHE_CS) +#if defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS) /* * We need to flush the initial global data (gd_t) before the dcache * will be invalidated. @@ -1354,10 +1354,10 @@ relocate_code: /* Flush initial global data range */ mr r3, r4 - addi r4, r4, CFG_GBL_DATA_SIZE@l + addi r4, r4, CONFIG_SYS_GBL_DATA_SIZE@l bl flush_dcache_range -#if defined(CFG_INIT_DCACHE_CS) +#if defined(CONFIG_SYS_INIT_DCACHE_CS) /* * Undo the earlier data cache set-up for the primordial stack and * data area. First, invalidate the data cache and then disable data @@ -1366,19 +1366,19 @@ relocate_code: */ /* Invalidate the primordial stack and data area in cache */ - lis r3, CFG_INIT_RAM_ADDR@h - ori r3, r3, CFG_INIT_RAM_ADDR@l + lis r3, CONFIG_SYS_INIT_RAM_ADDR@h + ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l - lis r4, CFG_INIT_RAM_END@h - ori r4, r4, CFG_INIT_RAM_END@l + lis r4, CONFIG_SYS_INIT_RAM_END@h + ori r4, r4, CONFIG_SYS_INIT_RAM_END@l add r4, r4, r3 bl invalidate_dcache_range /* Disable cacheability for the region */ mfdccr r3 - lis r4, ~PPC_128MB_SACR_VALUE(CFG_INIT_RAM_ADDR)@h - ori r4, r4, ~PPC_128MB_SACR_VALUE(CFG_INIT_RAM_ADDR)@l + lis r4, ~PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@h + ori r4, r4, ~PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@l and r3, r3, r4 mtdccr r3 @@ -1394,15 +1394,15 @@ relocate_code: lis r3, PBxCR_VAL@h ori r3, r3, PBxCR_VAL@l mtdcr ebccfgd, r3 -#endif /* defined(CFG_INIT_DCACHE_CS) */ +#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */ /* Restore registers */ mr r3, r9 mr r4, r10 mr r5, r11 -#endif /* defined(CONFIG_4xx_DCACHE) || defined(CFG_INIT_DCACHE_CS) */ +#endif /* defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS) */ -#ifdef CFG_INIT_RAM_DCACHE +#ifdef CONFIG_SYS_INIT_RAM_DCACHE /* * Unlock the previously locked d-cache */ @@ -1424,7 +1424,7 @@ relocate_code: mtspr dtv3,r6 msync isync -#endif /* CFG_INIT_RAM_DCACHE */ +#endif /* CONFIG_SYS_INIT_RAM_DCACHE */ #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ @@ -1439,11 +1439,11 @@ relocate_code: dccci 0,0 /* Invalidate data cache, now no longer our stack */ sync isync -#ifdef CFG_TLB_FOR_BOOT_FLASH - addi r1,r0,CFG_TLB_FOR_BOOT_FLASH /* Use defined TLB */ +#ifdef CONFIG_SYS_TLB_FOR_BOOT_FLASH + addi r1,r0,CONFIG_SYS_TLB_FOR_BOOT_FLASH /* Use defined TLB */ #else addi r1,r0,0x0000 /* Default TLB entry is #0 */ -#endif /* CFG_TLB_FOR_BOOT_FLASH */ +#endif /* CONFIG_SYS_TLB_FOR_BOOT_FLASH */ tlbre r0,r1,0x0002 /* Read contents */ ori r0,r0,0x0c00 /* Or in the inhibit, write through bit */ tlbwe r0,r1,0x0002 /* Save it out */ @@ -1455,8 +1455,8 @@ relocate_code: mr r10, r5 /* Save copy of Destination Address */ mr r3, r5 /* Destination Address */ - lis r4, CFG_MONITOR_BASE@h /* Source Address */ - ori r4, r4, CFG_MONITOR_BASE@l + lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */ + ori r4, r4, CONFIG_SYS_MONITOR_BASE@l lwz r5, GOT(__init_end) sub r5, r5, r4 li r6, L1_CACHE_BYTES /* Cache Line Size */ @@ -1464,7 +1464,7 @@ relocate_code: /* * Fix GOT pointer: * - * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address + * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address * * Offset: */ @@ -1775,74 +1775,74 @@ ppc405ep_init: lis r3,GPIO0_OSRH@h /* config GPIO output select */ ori r3,r3,GPIO0_OSRH@l - lis r4,CFG_GPIO0_OSRH@h - ori r4,r4,CFG_GPIO0_OSRH@l + lis r4,CONFIG_SYS_GPIO0_OSRH@h + ori r4,r4,CONFIG_SYS_GPIO0_OSRH@l stw r4,0(r3) lis r3,GPIO0_OSRL@h ori r3,r3,GPIO0_OSRL@l - lis r4,CFG_GPIO0_OSRL@h - ori r4,r4,CFG_GPIO0_OSRL@l + lis r4,CONFIG_SYS_GPIO0_OSRL@h + ori r4,r4,CONFIG_SYS_GPIO0_OSRL@l stw r4,0(r3) lis r3,GPIO0_ISR1H@h /* config GPIO input select */ ori r3,r3,GPIO0_ISR1H@l - lis r4,CFG_GPIO0_ISR1H@h - ori r4,r4,CFG_GPIO0_ISR1H@l + lis r4,CONFIG_SYS_GPIO0_ISR1H@h + ori r4,r4,CONFIG_SYS_GPIO0_ISR1H@l stw r4,0(r3) lis r3,GPIO0_ISR1L@h ori r3,r3,GPIO0_ISR1L@l - lis r4,CFG_GPIO0_ISR1L@h - ori r4,r4,CFG_GPIO0_ISR1L@l + lis r4,CONFIG_SYS_GPIO0_ISR1L@h + ori r4,r4,CONFIG_SYS_GPIO0_ISR1L@l stw r4,0(r3) lis r3,GPIO0_TSRH@h /* config GPIO three-state select */ ori r3,r3,GPIO0_TSRH@l - lis r4,CFG_GPIO0_TSRH@h - ori r4,r4,CFG_GPIO0_TSRH@l + lis r4,CONFIG_SYS_GPIO0_TSRH@h + ori r4,r4,CONFIG_SYS_GPIO0_TSRH@l stw r4,0(r3) lis r3,GPIO0_TSRL@h ori r3,r3,GPIO0_TSRL@l - lis r4,CFG_GPIO0_TSRL@h - ori r4,r4,CFG_GPIO0_TSRL@l + lis r4,CONFIG_SYS_GPIO0_TSRL@h + ori r4,r4,CONFIG_SYS_GPIO0_TSRL@l stw r4,0(r3) lis r3,GPIO0_TCR@h /* config GPIO driver output enables */ ori r3,r3,GPIO0_TCR@l - lis r4,CFG_GPIO0_TCR@h - ori r4,r4,CFG_GPIO0_TCR@l + lis r4,CONFIG_SYS_GPIO0_TCR@h + ori r4,r4,CONFIG_SYS_GPIO0_TCR@l stw r4,0(r3) li r3,pb1ap /* program EBC bank 1 for RTC access */ mtdcr ebccfga,r3 - lis r3,CFG_EBC_PB1AP@h - ori r3,r3,CFG_EBC_PB1AP@l + lis r3,CONFIG_SYS_EBC_PB1AP@h + ori r3,r3,CONFIG_SYS_EBC_PB1AP@l mtdcr ebccfgd,r3 li r3,pb1cr mtdcr ebccfga,r3 - lis r3,CFG_EBC_PB1CR@h - ori r3,r3,CFG_EBC_PB1CR@l + lis r3,CONFIG_SYS_EBC_PB1CR@h + ori r3,r3,CONFIG_SYS_EBC_PB1CR@l mtdcr ebccfgd,r3 li r3,pb1ap /* program EBC bank 1 for RTC access */ mtdcr ebccfga,r3 - lis r3,CFG_EBC_PB1AP@h - ori r3,r3,CFG_EBC_PB1AP@l + lis r3,CONFIG_SYS_EBC_PB1AP@h + ori r3,r3,CONFIG_SYS_EBC_PB1AP@l mtdcr ebccfgd,r3 li r3,pb1cr mtdcr ebccfga,r3 - lis r3,CFG_EBC_PB1CR@h - ori r3,r3,CFG_EBC_PB1CR@l + lis r3,CONFIG_SYS_EBC_PB1CR@h + ori r3,r3,CONFIG_SYS_EBC_PB1CR@l mtdcr ebccfgd,r3 li r3,pb4ap /* program EBC bank 4 for FPGA access */ mtdcr ebccfga,r3 - lis r3,CFG_EBC_PB4AP@h - ori r3,r3,CFG_EBC_PB4AP@l + lis r3,CONFIG_SYS_EBC_PB4AP@h + ori r3,r3,CONFIG_SYS_EBC_PB4AP@l mtdcr ebccfgd,r3 li r3,pb4cr mtdcr ebccfga,r3 - lis r3,CFG_EBC_PB4CR@h - ori r3,r3,CFG_EBC_PB4CR@l + lis r3,CONFIG_SYS_EBC_PB4CR@h + ori r3,r3,CONFIG_SYS_EBC_PB4CR@l mtdcr ebccfgd,r3 #endif @@ -2111,20 +2111,20 @@ nand_boot_common: * First initialize SDRAM. It has to be available *before* calling * nand_boot(). */ - lis r3,CFG_SDRAM_BASE@h - ori r3,r3,CFG_SDRAM_BASE@l + lis r3,CONFIG_SYS_SDRAM_BASE@h + ori r3,r3,CONFIG_SYS_SDRAM_BASE@l bl initdram /* * Now copy the 4k SPL code into SDRAM and continue execution * from there. */ - lis r3,CFG_NAND_BOOT_SPL_DST@h - ori r3,r3,CFG_NAND_BOOT_SPL_DST@l - lis r4,CFG_NAND_BOOT_SPL_SRC@h - ori r4,r4,CFG_NAND_BOOT_SPL_SRC@l - lis r5,CFG_NAND_BOOT_SPL_SIZE@h - ori r5,r5,CFG_NAND_BOOT_SPL_SIZE@l + lis r3,CONFIG_SYS_NAND_BOOT_SPL_DST@h + ori r3,r3,CONFIG_SYS_NAND_BOOT_SPL_DST@l + lis r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@h + ori r4,r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@l + lis r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@h + ori r5,r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@l bl nand_boot_relocate /* -- cgit v1.1