From 055606bd25e88c0cd04ad348a679a04b1b616bee Mon Sep 17 00:00:00 2001 From: Niklaus Giger Date: Wed, 16 Jan 2008 18:39:20 +0100 Subject: ppc4xx: Netstal HCU4 board: added various fixes and POST - Moved some common code to netstal/common/nm_bsp.c. - sdram initialisation goes go netstal/common/fixed_sdram.c. - Added support for POST. - Stylistic cleanups (multi-line comments/ enforce 80 colomn width) Signed-off-by: Niklaus Giger --- board/netstal/hcu4/Makefile | 4 +- board/netstal/hcu4/hcu4.c | 340 ++++++++++---------------------------------- 2 files changed, 77 insertions(+), 267 deletions(-) (limited to 'board/netstal/hcu4') diff --git a/board/netstal/hcu4/Makefile b/board/netstal/hcu4/Makefile index af90821..c0d719f 100644 --- a/board/netstal/hcu4/Makefile +++ b/board/netstal/hcu4/Makefile @@ -22,10 +22,12 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a +vpath fixed_sdram.c ../common vpath hcu_flash.c ../common +vpath nm_bsp.c ../common # NOBJS : Netstal common objects -NOBJS = hcu_flash.o +NOBJS = fixed_sdram.o hcu_flash.o nm_bsp.o COBJS = $(BOARD).o SOBJS = diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c index 48a3f13..714b98e 100644 --- a/board/netstal/hcu4/hcu4.c +++ b/board/netstal/hcu4/hcu4.c @@ -23,32 +23,16 @@ #include #include #include -#include "../common/nm_bsp.c" +#include "../common/nm.h" DECLARE_GLOBAL_DATA_PTR; #define HCU_MACH_VERSIONS_REGISTER (0x7C000000 + 0xF00000) +#define SYS_SLOT_ADDRESS (0x7C000000 + 0x400000) +#define HCU3_DIGITAL_IO_REGISTER (0x7C000000 + 0x500000) +#define HCU_SW_INSTALL_REQUESTED 0x10 -#define SDRAM_LEN 32*1024*1024 /* 32 MB -RAM */ - -#define DO_UGLY_SDRAM_WORKAROUND - -enum { - /* HW_GENERATION_HCU wird nicht mehr unterstuetzt */ - HW_GENERATION_HCU2 = 0x10, - HW_GENERATION_HCU3 = 0x10, - HW_GENERATION_HCU4 = 0x20, - HW_GENERATION_MCU = 0x08, - HW_GENERATION_MCU20 = 0x0a, - HW_GENERATION_MCU25 = 0x09, -}; - -void hcu_led_set(u32 value); -long int spd_sdram(int(read_spd)(uint addr)); - -#ifdef CONFIG_SPD_EEPROM -#define DEBUG -#endif +#undef DEBUG #if defined(DEBUG) void show_sdram_registers(void); @@ -69,6 +53,7 @@ void show_sdram_registers(void); /* Attention: If you want 1 microsecs times from the external oscillator * use 0x00804051. But this causes problems with u-boot and linux! */ +#define CPC0_CR0_VALUE 0x0030103c #define CPC0_CR1_VALUE 0x00004051 #define CPC0_ECR 0xaa /* Edge condition register */ #define EBC0_CFG 0x23 /* External Peripheral Control Register */ @@ -77,18 +62,18 @@ void show_sdram_registers(void); int board_early_init_f (void) { - /*-------------------------------------------------------------------+ - | Interrupt controller setup for the HCU4 board. - | Note: IRQ 0-15 405GP internally generated; high; level sensitive - | IRQ 16 405GP internally generated; low; level sensitive - | IRQ 17-24 RESERVED/UNUSED - | IRQ 31 (EXT IRQ 6) (unused) - +-------------------------------------------------------------------*/ + /* + * Interrupt controller setup for the HCU4 board. + * Note: IRQ 0-15 405GP internally generated; high; level sensitive + * IRQ 16 405GP internally generated; low; level sensitive + * IRQ 17-24 RESERVED/UNUSED + * IRQ 31 (EXT IRQ 6) (unused) + */ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ mtdcr (uicer, 0x00000000); /* disable all ints */ mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ - mtdcr (uicpr, 0xFFFFFF87); /* set int polarities */ - mtdcr (uictr, 0x10000000); /* set int trigger levels */ + mtdcr (uicpr, 0xFFFFE000); /* set int polarities */ + mtdcr (uictr, 0x00000000); /* set int trigger levels */ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ mtdcr(CPC0_CR1, CPC0_CR1_VALUE); @@ -105,47 +90,44 @@ int board_pre_init (void) } #endif +int sys_install_requested(void) +{ + u16 *ioValuePtr = (u16 *)HCU3_DIGITAL_IO_REGISTER; + return (in_be16(ioValuePtr) & HCU_SW_INSTALL_REQUESTED) != 0; +} + int checkboard (void) { - unsigned int j; - u16 *boardVersReg = (u16 *) HCU_MACH_VERSIONS_REGISTER; - u16 generation = *boardVersReg & 0xf0; - u16 index = *boardVersReg & 0x0f; + u16 *boardVersReg = (u16 *)HCU_MACH_VERSIONS_REGISTER; + u16 generation = in_be16(boardVersReg) & 0xf0; + u16 index = in_be16(boardVersReg) & 0x0f; + /* Cannot be done, in board_early_init */ + mtdcr(CPC0_CR0, CPC0_CR0_VALUE); /* Force /RTS to active. The board it not wired quite - correctly to use cts/rtc flow control, so just force the - /RST active and forget about it. */ + * correctly to use cts/rtc flow control, so just force the + * /RST active and forget about it. + */ writeb (readb (0xef600404) | 0x03, 0xef600404); - printf ("\nNetstal Maschinen AG "); - if (generation == HW_GENERATION_HCU3) - printf ("HCU3: index %d\n\n", index); - else if (generation == HW_GENERATION_HCU4) - printf ("HCU4: index %d\n\n", index); - hcu_led_set(0); - for (j = 0; j < 7; j++) { - hcu_led_set(1 << j); - udelay(50 * 1000); - } + nm_show_print(generation, index, 0); return 0; } u32 hcu_led_get(void) { - return (~((*(u32 *)GPIO0_OR)) >> 23) & 0xff; + return (~(in_be32((u32 *)GPIO0_OR)) >> 23) & 0xff; } -/*---------------------------------------------------------------------------+ +/* * hcu_led_set value to be placed into the LEDs (max 6 bit) - *---------------------------------------------------------------------------*/ + */ void hcu_led_set(u32 value) { u32 tmp = ~value; - u32 *ledReg; tmp = (tmp << 23) | 0x7FFFFF; - ledReg = (u32 *)GPIO0_OR; - *ledReg = tmp; + out_be32((u32 *)GPIO0_OR, tmp); } /* @@ -157,246 +139,72 @@ void sdram_init(void) return; } -#if defined(DEBUG) -void show_sdram_registers(void) -{ - u32 value; - - printf ("SDRAM Controller Registers --\n"); - mfsdram(mem_mcopt1, value); - printf (" SDRAM0_CFG : 0x%08x\n", value); - mfsdram(mem_status, value); - printf (" SDRAM0_STATUS: 0x%08x\n", value); - mfsdram(mem_mb0cf, value); - printf (" SDRAM0_B0CR : 0x%08x\n", value); - mfsdram(mem_mb1cf, value); - printf (" SDRAM0_B1CR : 0x%08x\n", value); - mfsdram(mem_sdtr1, value); - printf (" SDRAM0_TR : 0x%08x\n", value); - mfsdram(mem_rtr, value); - printf (" SDRAM0_RTR : 0x%08x\n", value); -} -#endif - /* - * this is even after checkboard. It returns the size of the SDRAM - * that we have installed. This function is called by board_init_f - * in lib_ppc/board.c to initialize the memory and return what I - * found. These are default value, which will be overridden later. + * hcu_get_slot */ - -long int fixed_hcu4_sdram (int board_type) +u32 hcu_get_slot(void) { -#ifdef DEBUG - printf (__FUNCTION__); -#endif - /* disable memory controller */ - mtdcr (memcfga, mem_mcopt1); - mtdcr (memcfgd, 0x00000000); - - udelay (500); - - /* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */ - mtdcr (memcfga, mem_besra); - mtdcr (memcfgd, 0xffffffff); - - /* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */ - mtdcr (memcfga, mem_besrb); - mtdcr (memcfgd, 0xffffffff); - - /* Clear SDRAM0_ECCCFG (disable ECC) */ - mtdcr (memcfga, mem_ecccf); - mtdcr (memcfgd, 0x00000000); - - /* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */ - mtdcr (memcfga, mem_eccerr); - mtdcr (memcfgd, 0xffffffff); - - /* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2 - * TODO ngngng - */ - mtdcr (memcfga, mem_sdtr1); - mtdcr (memcfgd, 0x008a4015); - - /* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1 - * TODO ngngng - */ - mtdcr (memcfga, mem_mb0cf); - mtdcr (memcfgd, 0x00062001); - - /* refresh timer = 0x400 */ - mtdcr (memcfga, mem_rtr); - mtdcr (memcfgd, 0x04000000); - - /* Power management idle timer set to the default. */ - mtdcr (memcfga, mem_pmit); - mtdcr (memcfgd, 0x07c00000); - - udelay (500); - - /* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) TODO */ - mtdcr (memcfga, mem_mcopt1); - mtdcr (memcfgd, 0x90800000); - -#ifdef DEBUG - printf ("%s: done\n", __FUNCTION__); -#endif - return SDRAM_LEN; + u16 *slot = (u16 *)SYS_SLOT_ADDRESS; + return in_be16(slot) & 0x7f; } -/*---------------------------------------------------------------------------+ - * hcu_serial_number - *---------------------------------------------------------------------------*/ -static u32 hcu_serial_number(void) +/* + * get_serial_number + */ +u32 get_serial_number(void) { u32 *serial = (u32 *)CFG_FLASH_BASE; - if (*serial == 0xffffffff) - return get_ticks(); + if (in_be32(serial) == 0xffffffff) + return 0; - return *serial; + return in_be32(serial); } -/*---------------------------------------------------------------------------+ +/* * misc_init_r. - *---------------------------------------------------------------------------*/ + */ int misc_init_r(void) { - char *s = getenv("ethaddr"); - char *e; - int i; - u32 serial = hcu_serial_number(); - - for (i = 0; i < 6; ++i) { - gd->bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0; - if (s) - s = (*e) ? e + 1 : e; - } - - if (gd->bd->bi_enetaddr[3] == 0 && - gd->bd->bi_enetaddr[4] == 0 && - gd->bd->bi_enetaddr[5] == 0) { - char ethaddr[22]; - /* [0..3] Must be in sync with CONFIG_ETHADDR */ - gd->bd->bi_enetaddr[0] = 0x00; - gd->bd->bi_enetaddr[1] = 0x60; - gd->bd->bi_enetaddr[2] = 0x13; - gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff; - gd->bd->bi_enetaddr[4] = (serial >> 8) & 0xff; - gd->bd->bi_enetaddr[5] = (serial >> 0) & 0xff; - sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0", - gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1], - gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3], - gd->bd->bi_enetaddr[4], gd->bd->bi_enetaddr[5]) ; - printf("%s: Setting eth %s serial 0x%x\n", __FUNCTION__, - ethaddr, serial); - setenv ("ethaddr", ethaddr); - } + common_misc_init_r(); + set_params_for_sw_install( sys_install_requested(), "hcu4" ); return 0; } -#ifdef DO_UGLY_SDRAM_WORKAROUND -#include "i2c.h" - -void set_spd_default_value(unsigned int spd_addr,uchar def_val) -{ - uchar value; - int res = i2c_read(SPD_EEPROM_ADDRESS, spd_addr, 1, &value, 1) ; - - if (res == 0 && value == 0xff) { - res = i2c_write(SPD_EEPROM_ADDRESS, - spd_addr, 1, &def_val, 1) ; -#ifdef DEBUG - printf("%s: Setting spd offset %3d to %3d res %d\n", - __FUNCTION__, spd_addr, def_val, res); -#endif - } -} -#endif - long int initdram(int board_type) { long dram_size = 0; - -#if !defined(CONFIG_SPD_EEPROM) - dram_size = fixed_hcu4_sdram(); -#else -#ifdef DO_UGLY_SDRAM_WORKAROUND - /* Workaround if you have no working I2C-EEPROM-SPD-configuration */ - i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); - set_spd_default_value(2, 4); /* SDRAM Type */ - set_spd_default_value(7, 0); /* module width, high byte */ - set_spd_default_value(12, 1); /* Refresh or 0x81 */ - - /* Only correct for HCU3 with 32 MB RAM*/ - /* Number of bytes used by module manufacturer */ - set_spd_default_value( 0, 128); - set_spd_default_value( 1, 11 ); /* Total SPD memory size */ - set_spd_default_value( 2, 4 ); /* Memory type */ - set_spd_default_value( 3, 12 ); /* Number of row address bits */ - set_spd_default_value( 4, 9 ); /* Number of column address bits */ - set_spd_default_value( 5, 1 ); /* Number of module rows */ - set_spd_default_value( 6, 32 ); /* Module data width, LSB */ - set_spd_default_value( 7, 0 ); /* Module data width, MSB */ - set_spd_default_value( 8, 1 ); /* Module interface signal levels */ - /* SDRAM cycle time for highest CL (Tclk) */ - set_spd_default_value( 9, 112); - /* SDRAM access time from clock for highest CL (Tac) */ - set_spd_default_value(10, 84 ); - set_spd_default_value(11, 2 ); /* Module configuration type */ - set_spd_default_value(12, 128); /* Refresh rate/type */ - set_spd_default_value(13, 16 ); /* Primary SDRAM width */ - set_spd_default_value(14, 8 ); /* Error Checking SDRAM width */ - /* SDRAM device attributes, min clock delay for back to back */ - /*random column addresses (Tccd) */ - set_spd_default_value(15, 1 ); - /* SDRAM device attributes, burst lengths supported */ - set_spd_default_value(16, 143); - /* SDRAM device attributes, number of banks on SDRAM device */ - set_spd_default_value(17, 4 ); - /* SDRAM device attributes, CAS latency */ - set_spd_default_value(18, 6 ); - /* SDRAM device attributes, CS latency */ - set_spd_default_value(19, 1 ); - /* SDRAM device attributes, WE latency */ - set_spd_default_value(20, 1 ); - set_spd_default_value(21, 0 ); /* SDRAM module attributes */ - /* SDRAM device attributes, general */ - set_spd_default_value(22, 14 ); - /* SDRAM cycle time for 2nd highest CL (Tclk) */ - set_spd_default_value(23, 117); - /* SDRAM access time from clock for2nd highest CL (Tac) */ - set_spd_default_value(24, 84 ); - /* SDRAM cycle time for 3rd highest CL (Tclk) */ - set_spd_default_value(25, 0 ); - /* SDRAM access time from clock for3rd highest CL (Tac) */ - set_spd_default_value(26, 0 ); - set_spd_default_value(27, 15 ); /* Minimum row precharge time (Trp) */ - /* Minimum row active to row active delay (Trrd) */ - set_spd_default_value(28, 14 ); - set_spd_default_value(29, 15 ); /* Minimum CAS to RAS delay (Trcd) */ - set_spd_default_value(30, 37 ); /* Minimum RAS pulse width (Tras) */ - set_spd_default_value(31, 8 ); /* Module bank density */ - /* Command and Address signal input setup time */ - set_spd_default_value(32, 21 ); - /* Command and Address signal input hold time */ - set_spd_default_value(33, 8 ); - set_spd_default_value(34, 21 ); /* Data signal input setup time */ - set_spd_default_value(35, 8 ); /* Data signal input hold time */ -#endif /* DO_UGLY_SDRAM_WORKAROUND */ - dram_size = spd_sdram(0); -#endif + u16 *boardVersReg = (u16 *) HCU_MACH_VERSIONS_REGISTER; + u16 generation = in_be16(boardVersReg) & 0xf0; + if (generation == HW_GENERATION_HCU3) + dram_size = 32*1024*1024; + else dram_size = 64*1024*1024; + fixed_hcu4_sdram(dram_size); #ifdef DEBUG show_sdram_registers(); #endif -#if defined(CFG_DRAM_TEST) - bcu4_testdram(dram_size); - printf("%s %d MB of SDRAM\n", __FUNCTION__, dram_size/(1024*1024)); -#endif - return dram_size; } + +#if defined(CONFIG_POST) +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + return 0; /* No hotkeys supported */ +} +#endif /* CONFIG_POST */ + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); + +} +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ -- cgit v1.1