From dac9a8f8a2ae3a116748d056305251cfc035a6e4 Mon Sep 17 00:00:00 2001
From: Lukasz Majewski <lukma@denx.de>
Date: Tue, 3 Sep 2019 16:38:39 +0200
Subject: DM: I2C: Switch display5 board to use DM_I2C

After this commit the display5 device would use I2C driver supporting
driver model (DM_I2C).

The 'i2c' and 'eeprom' commands now use DM I2C drivers and initialize
on-bus devices according to device tree description.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
---
 board/liebherr/display5/display5.c | 48 --------------------------------------
 1 file changed, 48 deletions(-)

(limited to 'board/liebherr')

diff --git a/board/liebherr/display5/display5.c b/board/liebherr/display5/display5.c
index 037c4e6..5ebc852 100644
--- a/board/liebherr/display5/display5.c
+++ b/board/liebherr/display5/display5.c
@@ -18,7 +18,6 @@
 #include <asm/gpio.h>
 #include <malloc.h>
 #include <asm/mach-imx/iomux-v3.h>
-#include <asm/mach-imx/mxc_i2c.h>
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/spi.h>
 #include <mmc.h>
@@ -119,49 +118,6 @@ int dram_init(void)
 	return 0;
 }
 
-#define PC	MUX_PAD_CTRL(I2C_PAD_CTRL)
-/* I2C1: TFA9879 */
-struct i2c_pads_info i2c_pad_info0 = {
-	.scl = {
-		.i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC,
-		.gpio_mode = MX6_PAD_EIM_D21__GPIO3_IO21 | PC,
-		.gp = IMX_GPIO_NR(3, 21)
-	},
-	.sda = {
-		.i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC,
-		.gpio_mode = MX6_PAD_EIM_D28__GPIO3_IO28 | PC,
-		.gp = IMX_GPIO_NR(3, 28)
-	}
-};
-
-/* I2C2: TIVO TM4C123 */
-struct i2c_pads_info i2c_pad_info1 = {
-	.scl = {
-		.i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC,
-		.gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC,
-		.gp = IMX_GPIO_NR(2, 30)
-	},
-	.sda = {
-		.i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC,
-		.gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC,
-		.gp = IMX_GPIO_NR(3, 16)
-	}
-};
-
-/* I2C3: PMIC PF0100, EEPROM AT24C256C */
-struct i2c_pads_info i2c_pad_info2 = {
-	.scl = {
-		.i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC,
-		.gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC,
-		.gp = IMX_GPIO_NR(3, 17)
-	},
-	.sda = {
-		.i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
-		.gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC,
-		.gp = IMX_GPIO_NR(3, 18)
-	}
-};
-
 iomux_v3_cfg_t const misc_pads[] = {
 	/* Prod ID GPIO pins */
 	MX6_PAD_NANDF_D4__GPIO2_IO04    | MUX_PAD_CTRL(NO_PAD_CTRL),
@@ -369,10 +325,6 @@ int board_init(void)
 
 	udelay(25);
 
-	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
-	setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
-	setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
-
 	return 0;
 }
 
-- 
cgit v1.1