From 4152ea24f2f2aabcbcfd584c474fb9bb19243bbe Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Sat, 11 Jun 2022 20:21:09 +0800 Subject: imx: imx8mn-kontron-n801x: enable pinctrl_wdog in SPL Mark pinctrl_wdog as u-boot,dm-spl to clean up board code, The set_wdog_reset() function is not necessary as this is handled by the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property being set. Signed-off-by: Peng Fan Reviewed-by: Frieder Schrempf Tested-by: Frieder Schrempf --- board/kontron/sl-mx8mm/spl.c | 18 ------------------ 1 file changed, 18 deletions(-) (limited to 'board/kontron') diff --git a/board/kontron/sl-mx8mm/spl.c b/board/kontron/sl-mx8mm/spl.c index a58a75d..63361f1 100644 --- a/board/kontron/sl-mx8mm/spl.c +++ b/board/kontron/sl-mx8mm/spl.c @@ -32,7 +32,6 @@ enum { #define GPIO_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) #define I2C_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE) -#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) #define TOUCH_RESET_GPIO IMX_GPIO_NR(3, 23) @@ -50,10 +49,6 @@ static iomux_v3_cfg_t const touch_gpio[] = { IMX8MM_PAD_SAI5_RXD2_GPIO3_IO23 | MUX_PAD_CTRL(GPIO_PAD_CTRL) }; -static iomux_v3_cfg_t const wdog_pads[] = { - IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), -}; - int spl_board_boot_device(enum boot_device boot_dev_spl) { switch (boot_dev_spl) { @@ -216,17 +211,6 @@ void spl_board_init(void) printf("Failed to find clock node. Check device tree\n"); } -int board_early_init_f(void) -{ - struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; - - imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); - - set_wdog_reset(wdog); - - return 0; -} - static int power_init_board(void) { struct udevice *dev; @@ -261,8 +245,6 @@ void board_init_f(ulong dummy) init_uart_clk(2); - board_early_init_f(); - timer_init(); /* Clear the BSS. */ -- cgit v1.1